DEVELOPMENT OF COMPUTER SUPPORTED INFORMATION SYSTEM SHELL FOR MEASURING POLLUTION PROGRESS

EPA Science Inventory

Basic elements and concepts of information systems are presented:definition of the term "information", main elements of data and atabase structure. he report also deals with the information system and its underlying theory and design. xamples of the pplication of information syst...

An information-theoretic approach to assess practical identifiability of parametric dynamical systems.

PubMed

Pant, Sanjay; Lombardi, Damiano

2015-10-01

A new approach for assessing parameter identifiability of dynamical systems in a Bayesian setting is presented. The concept of Shannon entropy is employed to measure the inherent uncertainty in the parameters. The expected reduction in this uncertainty is seen as the amount of information one expects to gain about the parameters due to the availability of noisy measurements of the dynamical system. Such expected information gain is interpreted in terms of the variance of a hypothetical measurement device that can measure the parameters directly, and is related to practical identifiability of the parameters. If the individual parameters are unidentifiable, correlation between parameter combinations is assessed through conditional mutual information to determine which sets of parameters can be identified together. The information theoretic quantities of entropy and information are evaluated numerically through a combination of Monte Carlo and k-nearest neighbour methods in a non-parametric fashion. Unlike many methods to evaluate identifiability proposed in the literature, the proposed approach takes the measurement-noise into account and is not restricted to any particular noise-structure. Whilst computationally intensive for large dynamical systems, it is easily parallelisable and is non-intrusive as it does not necessitate re-writing of the numerical solvers of the dynamical system. The application of such an approach is presented for a variety of dynamical systems--ranging from systems governed by ordinary differential equations to partial differential equations--and, where possible, validated against results previously published in the literature. Copyright © 2015 Elsevier Inc. All rights reserved.

Behavioral System Feedback Measurement Failure: Sweeping Quality under the Rug

ERIC Educational Resources Information Center

Mihalic, Maria T.; Ludwig, Timothy D.

2009-01-01

Behavioral Systems rely on valid measurement systems to manage processes and feedback and to deliver contingencies. An examination of measurement system components designed to track customer service quality of furniture delivery drivers revealed the measurement system failed to capture information it was designed to measure. A reason for this…

Information-theoretic decomposition of embodied and situated systems.

PubMed

Da Rold, Federico

2018-07-01

The embodied and situated view of cognition stresses the importance of real-time and nonlinear bodily interaction with the environment for developing concepts and structuring knowledge. In this article, populations of robots controlled by an artificial neural network learn a wall-following task through artificial evolution. At the end of the evolutionary process, time series are recorded from perceptual and motor neurons of selected robots. Information-theoretic measures are estimated on pairings of variables to unveil nonlinear interactions that structure the agent-environment system. Specifically, the mutual information is utilized to quantify the degree of dependence and the transfer entropy to detect the direction of the information flow. Furthermore, the system is analyzed with the local form of such measures, thus capturing the underlying dynamics of information. Results show that different measures are interdependent and complementary in uncovering aspects of the robots' interaction with the environment, as well as characteristics of the functional neural structure. Therefore, the set of information-theoretic measures provides a decomposition of the system, capturing the intricacy of nonlinear relationships that characterize robots' behavior and neural dynamics. Copyright © 2018 Elsevier Ltd. All rights reserved.

77 FR 23674 - Proposed Information Collection Requests: Measures and Methods for the National Reporting System...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-20

... DEPARTMENT OF EDUCATION Proposed Information Collection Requests: Measures and Methods for the National Reporting System for Adult Education SUMMARY: The Office of Vocational and Adult Education (OVAE... Methods for the National Reporting System for Adult Education. OMB Control Number: 1830-0027. Type of...

The Concept of the Relationship between Information System Maturity and Industry Performance in Indonesia

NASA Astrophysics Data System (ADS)

Palilingan, V. R.; Mario, T. P.

2018-01-01

Industry in Indonesia continues to grow from year to year. Along with these developments, the use of information technology, which is the basis of information systems, should be considered as a handy tool to survive in the competition in the industry. Various previous studies have discussed much the use of information systems and their role at the strategic level. But more in-depth research is still needed to find out the extent to which the maturity of the use of information systems through its elements can affect the performance of companies in various sectors industries in Indonesia. It is hoped that this concept can be used as a subsequent research by distributing questionnaires based on the method of statements that have been defined by researchers. With this concepts, the next development will continue to measure the relationship information systems maturity in general with the organizations performance. The result of the concept proposed by the researcher is expected to be able to measure the maturity relationship of an information system with the connection with the consumer, demand/supply planning element, innovation, performance measurement, IT impact management and also internal process.

Systems and Methods for Correcting Optical Reflectance Measurements

NASA Technical Reports Server (NTRS)

Yang, Ye (Inventor); Shear, Michael A. (Inventor); Soller, Babs R. (Inventor); Soyemi, Olusola O. (Inventor)

2014-01-01

We disclose measurement systems and methods for measuring analytes in target regions of samples that also include features overlying the target regions. The systems include: (a) a light source; (b) a detection system; (c) a set of at least first, second, and third light ports which transmit light from the light source to a sample and receive and direct light reflected from the sample to the detection system, generating a first set of data including information corresponding to both an internal target within the sample and features overlying the internal target, and a second set of data including information corresponding to features overlying the internal target; and (d) a processor configured to remove information characteristic of the overlying features from the first set of data using the first and second sets of data to produce corrected information representing the internal target.

Systems and methods for correcting optical reflectance measurements

NASA Technical Reports Server (NTRS)

Yang, Ye (Inventor); Soller, Babs R. (Inventor); Soyemi, Olusola O. (Inventor); Shear, Michael A. (Inventor)

2009-01-01

We disclose measurement systems and methods for measuring analytes in target regions of samples that also include features overlying the target regions. The systems include: (a) a light source; (b) a detection system; (c) a set of at least first, second, and third light ports which transmit light from the light source to a sample and receive and direct light reflected from the sample to the detection system, generating a first set of data including information corresponding to both an internal target within the sample and features overlying the internal target, and a second set of data including information corresponding to features overlying the internal target; and (d) a processor configured to remove information characteristic of the overlying features from the first set of data using the first and second sets of data to produce corrected information representing the internal target.

IFKIS a basis for organizational measures in avalanche risk management

NASA Astrophysics Data System (ADS)

Bründl, M.; Etter, H.-J.; Klingler, Ch.; Steiniger, M.; Rhyner, J.; Ammann, W.

2003-04-01

The avalanche winter 1999 in Switzerland showed that the combination of protection measures like avalanche barriers, hazard zone mapping, artificial avalanche release and organisational measures (closure of roads, evacuation etc.) proved to perform well. However, education as well as information and communication between the involved organizations proved to be a weak link in the crisis management. In the first part of the project IFKIS we developed a modular education and training course program for security responsibles of settlements and roads. In the second part an information system was developed which improves on the one hand the information fluxes between the national center for avalanche forecasting, the Swiss Federal Institute for Snow and Avalanche Research SLF, and the local forecasters. On the other hand the communication between the avalanche security services in the communities can be enhanced. During the last two years an information system based on Internet technology has been developed for this purpose. This system allows the transmission of measured data and observations to a central database at SLF and visualization of the data for different users. It also provides the possibility to exchange information on organizational measures like closure of roads, artificial avalanche release etc. on a local and regional scale. This improves the information fluxes and the coordination of safety-measures because all users, although at different places, are on the same information level. Inconsistent safety-measures can be avoided and information and communication concerning avalanche safety becomes much more transparent for all persons involved in hazard management. The training program as well the concept for the information-system are important basics for an efficient avalanche risk management but also for other natural processes and catastrophes.

Health care quality measures for children and adolescents in Foster Care: feasibility testing in electronic records.

PubMed

Deans, Katherine J; Minneci, Peter C; Nacion, Kristine M; Leonhart, Karen; Cooper, Jennifer N; Scholle, Sarah Hudson; Kelleher, Kelly J

2018-02-22

Preventive quality measures for the foster care population are largely untested. The objective of the study is to identify healthcare quality measures for young children and adolescents in foster care and to test whether the data required to calculate these measures can be feasibly extracted and interpreted within an electronic health records or within the Statewide Automated Child Welfare Information System. The AAP Recommendations for Preventive Pediatric Health Care served as the guideline for determining quality measures. Quality measures related to well child visits, developmental screenings, immunizations, trauma-related care, BMI measurements, sexually transmitted infections and depression were defined. Retrospective chart reviews were performed on a cohort of children in foster care from a single large pediatric institution and related county. Data available in the Ohio Statewide Automated Child Welfare Information System was compared to the same population studied in the electronic health record review. Quality measures were calculated as observed (received) to expected (recommended) ratios (O/E ratios) to describe the actual quantity of recommended health care that was received by individual children. Electronic health records and the Statewide Automated Child Welfare Information System data frequently lacked important information on foster care youth essential for calculating the measures. Although electronic health records were rich in encounter specific clinical data, they often lacked custodial information such as the dates of entry into and exit from foster care. In contrast, Statewide Automated Child Welfare Information System included robust data on custodial arrangements, but lacked detailed medical information. Despite these limitations, several quality measures were devised that attempted to accommodate these limitations. In this feasibility testing, neither the electronic health records at a single institution nor the county level Statewide Automated Child Welfare Information System was able to independently serve as a reliable source of data for health care quality measures for foster care youth. However, the ability to leverage both sources by matching them at an individual level may provide the complement of data necessary to assess the quality of healthcare.

Strong Similarity Measures for Ordered Sets of Documents in Information Retrieval.

ERIC Educational Resources Information Center

Egghe, L.; Michel, Christine

2002-01-01

Presents a general method to construct ordered similarity measures in information retrieval based on classical similarity measures for ordinary sets. Describes a test of some of these measures in an information retrieval system that extracted ranked document sets and discuses the practical usability of the ordered similarity measures. (Author/LRW)

The Intelligent Technologies of Electronic Information System

NASA Astrophysics Data System (ADS)

Li, Xianyu

2017-08-01

Based upon the synopsis of system intelligence and information services, this paper puts forward the attributes and the logic structure of information service, sets forth intelligent technology framework of electronic information system, and presents a series of measures, such as optimizing business information flow, advancing data decision capability, improving information fusion precision, strengthening deep learning application and enhancing prognostic and health management, and demonstrates system operation effectiveness. This will benefit the enhancement of system intelligence.

DEVELOPMENT OF COMPUTER SUPPORTED INFORMATION SYSTEM SHELL FOR MEASURING POLLUTION PREVENTION PROGRESS

EPA Science Inventory

Basic elements and concepts of information systems are presented: definition of the term "information", main elements of data and database structure. The report also deals with the information system and its underlying theory and design. Examples of the application of formation ...

78 FR 63488 - 60-Day Notice of Proposed Information Collection: Grant Drawdown Payment Request/LOCCS/VRS Voice...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-24

... system. The information collected on the payment voucher will also be used as an internal control measure... LOCCS/VRS voice activated system. The information collected on the form serves also as an internal control measure to ensure the lawful and appropriate disbursement of Federal funds. DATES: Comments Due...

USING INFORMATION THEORY TO DEFINE A SUSTAINABILITY INDEX

EPA Science Inventory

Information theory has many applications in Ecology and Environmental science, such as a biodiversity indicator, as a measure of evolution, a measure of distance from thermodynamic equilibrium, and as a measure of system organization. Fisher Information, in particular, provides a...

The Development and Implementation of a Management Information System for an Education Information Retrieval Center.

ERIC Educational Resources Information Center

Jegi, John

A management information system was developed for the Contra Costa County, California, Department of Education's Educational Information Retrieval Center. The system was designed to determine needed operational changes, to measure the effects of these changes, to monitor the center's operation, and to obtain information for dissemination. Data…

Approach to building knowledge bases in information-measuring systems diagnostics of acute leukemias

NASA Astrophysics Data System (ADS)

Nikitaev, V. G.; Pronichev, A. N.; Polyakov, E. V.; Dmitrieva, V. V.

2018-01-01

The paper describes an approach for the formation of the reference base of peripheral blood cells and bone marrow in information-measuring systems of acute leukemia diagnostics. The proposed approach has allowed to create a system, that is enable peer evaluation of blood cells needed for the training of recognition systems when carrying out microscopic studies.

Entropy of measurement and erasure: Szilard's membrane model revisited

NASA Astrophysics Data System (ADS)

Leff, Harvey S.; Rex, Andrew F.

1994-11-01

It is widely believed that measurement is accompanied by irreversible entropy increase. This conventional wisdom is based in part on Szilard's 1929 study of entropy decrease in a thermodynamic system by intelligent intervention (i.e., a Maxwell's demon) and Brillouin's association of entropy with information. Bennett subsequently argued that information acquisition is not necessarily irreversible, but information erasure must be dissipative (Landauer's principle). Inspired by the ensuing debate, we revisit the membrane model introduced by Szilard and find that it can illustrate and clarify (1) reversible measurement, (2) information storage, (3) decoupling of the memory from the system being measured, and (4) entropy increase associated with memory erasure and resetting.

User Satisfaction as a Measure of System Performance

ERIC Educational Resources Information Center

Griffiths, Jillian R.; Johnson, Frances; Hartley, Richard J.

2007-01-01

It is evident from previous research that user satisfaction is a multidimensional, subjective variable which can be affected by many factors other than performance of the system or searcher. This article draws on information retrieval and information systems literature in an attempt to understand what user satisfaction is, how it is measured, what…

An evaluation method of computer usability based on human-to-computer information transmission model.

PubMed

Ogawa, K

1992-01-01

This paper proposes a new evaluation and prediction method for computer usability. This method is based on our two previously proposed information transmission measures created from a human-to-computer information transmission model. The model has three information transmission levels: the device, software, and task content levels. Two measures, called the device independent information measure (DI) and the computer independent information measure (CI), defined on the software and task content levels respectively, are given as the amount of information transmitted. Two information transmission rates are defined as DI/T and CI/T, where T is the task completion time: the device independent information transmission rate (RDI), and the computer independent information transmission rate (RCI). The method utilizes the RDI and RCI rates to evaluate relatively the usability of software and device operations on different computer systems. Experiments using three different systems, in this case a graphical information input task, confirm that the method offers an efficient way of determining computer usability.

Multiparty quantum mutual information: An alternative definition

NASA Astrophysics Data System (ADS)

Kumar, Asutosh

2017-07-01

Mutual information is the reciprocal information that is common to or shared by two or more parties. Quantum mutual information for bipartite quantum systems is non-negative, and bears the interpretation of total correlation between the two subsystems. This may, however, no longer be true for three or more party quantum systems. In this paper, we propose an alternative definition of multipartite information, taking into account the shared information between two and more parties. It is non-negative, observes monotonicity under partial trace as well as completely positive maps, and equals the multipartite information measure in literature for pure states. We then define multiparty quantum discord, and give some examples. Interestingly, we observe that quantum discord increases when a measurement is performed on a large number of subsystems. Consequently, the symmetric quantum discord, which involves a measurement on all parties, reveals the maximal quantumness. This raises a question on the interpretation of measured mutual information as a classical correlation.

Informatics Metrics and Measures for a Smart Public Health Systems Approach: Information Science Perspective

PubMed Central

Shea, Christopher Michael

2017-01-01

Public health informatics is an evolving domain in which practices constantly change to meet the demands of a highly complex public health and healthcare delivery system. Given the emergence of various concepts, such as learning health systems, smart health systems, and adaptive complex health systems, health informatics professionals would benefit from a common set of measures and capabilities to inform our modeling, measuring, and managing of health system “smartness.” Here, we introduce the concepts of organizational complexity, problem/issue complexity, and situational awareness as three codependent drivers of smart public health systems characteristics. We also propose seven smart public health systems measures and capabilities that are important in a public health informatics professional's toolkit. PMID:28167999

Informatics Metrics and Measures for a Smart Public Health Systems Approach: Information Science Perspective.

PubMed

Carney, Timothy Jay; Shea, Christopher Michael

2017-01-01

Public health informatics is an evolving domain in which practices constantly change to meet the demands of a highly complex public health and healthcare delivery system. Given the emergence of various concepts, such as learning health systems, smart health systems, and adaptive complex health systems, health informatics professionals would benefit from a common set of measures and capabilities to inform our modeling, measuring, and managing of health system "smartness." Here, we introduce the concepts of organizational complexity, problem/issue complexity, and situational awareness as three codependent drivers of smart public health systems characteristics. We also propose seven smart public health systems measures and capabilities that are important in a public health informatics professional's toolkit.

Measuring Out-of-Time-Order Correlators on a Nuclear Magnetic Resonance Quantum Simulator

NASA Astrophysics Data System (ADS)

Li, Jun; Fan, Ruihua; Wang, Hengyan; Ye, Bingtian; Zeng, Bei; Zhai, Hui; Peng, Xinhua; Du, Jiangfeng

2017-07-01

The idea of the out-of-time-order correlator (OTOC) has recently emerged in the study of both condensed matter systems and gravitational systems. It not only plays a key role in investigating the holographic duality between a strongly interacting quantum system and a gravitational system, it also diagnoses the chaotic behavior of many-body quantum systems and characterizes information scrambling. Based on OTOCs, three different concepts—quantum chaos, holographic duality, and information scrambling—are found to be intimately related to each other. Despite its theoretical importance, the experimental measurement of the OTOC is quite challenging, and thus far there is no experimental measurement of the OTOC for local operators. Here, we report the measurement of OTOCs of local operators for an Ising spin chain on a nuclear magnetic resonance quantum simulator. We observe that the OTOC behaves differently in the integrable and nonintegrable cases. Based on the recent discovered relationship between OTOCs and the growth of entanglement entropy in the many-body system, we extract the entanglement entropy from the measured OTOCs, which clearly shows that the information entropy oscillates in time for integrable models and scrambles for nonintgrable models. With the measured OTOCs, we also obtain the experimental result of the butterfly velocity, which measures the speed of correlation propagation. Our experiment paves a way for experimentally studying quantum chaos, holographic duality, and information scrambling in many-body quantum systems with quantum simulators.

Assessing and Measuring Statistics Cognition in Higher Education Online Environments: Emerging Research and Opportunities

ERIC Educational Resources Information Center

Chase, Justin P.; Yan, Zheng

2017-01-01

The ability to effective learn, process, and retain new information is critical to the success of any student. Since mathematics are becoming increasingly more important in our educational systems, it is imperative that we devise an efficient system to measure these types of information recall. "Assessing and Measuring Statistics Cognition in…

48 CFR 42.1501 - General.

Code of Federal Regulations, 2014 CFR

2014-10-01

... System (CPARS) and Past Performance Information Retrieval System (PPIRS) metric tools to measure the... CONTRACT ADMINISTRATION AND AUDIT SERVICES Contractor Performance Information 42.1501 General. (a) Past performance information (including the ratings and supporting narratives) is relevant information, for future...

48 CFR 42.1501 - General.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Reporting System (CPARS) and Past Performance Information Retrieval System (PPIRS) metric tools to measure... CONTRACT ADMINISTRATION AND AUDIT SERVICES Contractor Performance Information 42.1501 General. (a) Past performance information (including the ratings and supporting narratives) is relevant information, for future...

Development of Performance Dashboards in Healthcare Sector: Key Practical Issues.

PubMed

Ghazisaeidi, Marjan; Safdari, Reza; Torabi, Mashallah; Mirzaee, Mahboobeh; Farzi, Jebraeil; Goodini, Azadeh

2015-10-01

Static nature of performance reporting systems in health care sector has resulted in inconsistent, incomparable, time consuming, and static performance reports that are not able to transparently reflect a round picture of performance and effectively support healthcare managers' decision makings. So, the healthcare sector needs interactive performance management tools such as performance dashboards to measure, monitor, and manage performance more effectively. The aim of this article was to identify key issues that need to be addressed for developing high-quality performance dashboards in healthcare sector. A literature review was established to search electronic research databases, e-journals collections, and printed journals, books, dissertations, and theses for relevant articles. The search strategy interchangeably used the terms of "dashboard", "performance measurement system", and "executive information system" with the term of "design" combined with operator "AND". Search results (n=250) were adjusted for duplications, screened based on their abstract relevancy and full-text availability (n=147) and then assessed for eligibility (n=40). Eligible articles were included if they had explicitly focused on dashboards, performance measurement systems or executive information systems design. Finally, 28 relevant articles included in the study. Creating high-quality performance dashboards requires addressing both performance measurement and executive information systems design issues. Covering these two fields, identified contents were categorized to four main domains: KPIs development, Data Sources and data generation, Integration of dashboards to source systems, and Information presentation issues. This study implies the main steps to develop dashboards for the purpose of performance management. Performance dashboards developed on performance measurement and executive information systems principles and supported by proper back-end infrastructure will result in creation of dynamic reports that help healthcare managers to consistently measure the performance, continuously detect outliers, deeply analyze causes of poor performance, and effectively plan for the future.

Textractor: a hybrid system for medications and reason for their prescription extraction from clinical text documents.

PubMed

Meystre, Stéphane M; Thibault, Julien; Shen, Shuying; Hurdle, John F; South, Brett R

2010-01-01

OBJECTIVE To describe a new medication information extraction system-Textractor-developed for the 'i2b2 medication extraction challenge'. The development, functionalities, and official evaluation of the system are detailed. Textractor is based on the Apache Unstructured Information Management Architecture (UMIA) framework, and uses methods that are a hybrid between machine learning and pattern matching. Two modules in the system are based on machine learning algorithms, while other modules use regular expressions, rules, and dictionaries, and one module embeds MetaMap Transfer. The official evaluation was based on a reference standard of 251 discharge summaries annotated by all teams participating in the challenge. The metrics used were recall, precision, and the F(1)-measure. They were calculated with exact and inexact matches, and were averaged at the level of systems and documents. The reference metric for this challenge, the system-level overall F(1)-measure, reached about 77% for exact matches, with a recall of 72% and a precision of 83%. Performance was the best with route information (F(1)-measure about 86%), and was good for dosage and frequency information, with F(1)-measures of about 82-85%. Results were not as good for durations, with F(1)-measures of 36-39%, and for reasons, with F(1)-measures of 24-27%. The official evaluation of Textractor for the i2b2 medication extraction challenge demonstrated satisfactory performance. This system was among the 10 best performing systems in this challenge.

Experimental scheme for qubit and qutrit symmetric informationally complete positive operator-valued measurements using multiport devices

NASA Astrophysics Data System (ADS)

Tabia, Gelo Noel M.

2012-12-01

It is crucial for various quantum information processing tasks that the state of a quantum system can be determined reliably and efficiently from general quantum measurements. One important class of measurements for this purpose is symmetric informationally complete positive operator-valued measurements (SIC-POVMs). SIC-POVMs have the advantage of providing an unbiased estimator for the quantum state with the minimal number of outcomes needed for full tomography. By virtue of Naimark's dilation theorem, any POVM can always be realized with a suitable coupling between the system and an auxiliary system and by performing a projective measurement on the joint system. In practice, finding the appropriate coupling is rather nontrivial. Here we propose an experimental design for directly implementing SIC-POVMs using multiport devices and path-encoded qubits and qutrits, the utility of which has recently been demonstrated by several experimental groups around the world. Furthermore, we describe how these multiports can be attained in practice with an integrated photonic system composed of nested linear optical elements.

An Information Push-Delivery System Design for Personal Information Service on the Internet.

ERIC Educational Resources Information Center

Chen, Chen-Tung; Tai, Wei-Shen

2003-01-01

Discussion of information overload from the Internet focuses on an information push-delivery system, which applies fuzzy information retrieval and fuzzy similarity measurement to avoid the information overload problem. Describes an empirical investigation conducted with students at Da-Yeh University (Taiwan) that investigated satisfaction with a…

Extracting and standardizing medication information in clinical text - the MedEx-UIMA system.

PubMed

Jiang, Min; Wu, Yonghui; Shah, Anushi; Priyanka, Priyanka; Denny, Joshua C; Xu, Hua

2014-01-01

Extraction of medication information embedded in clinical text is important for research using electronic health records (EHRs). However, most of current medication information extraction systems identify drug and signature entities without mapping them to standard representation. In this study, we introduced the open source Java implementation of MedEx, an existing high-performance medication information extraction system, based on the Unstructured Information Management Architecture (UIMA) framework. In addition, we developed new encoding modules in the MedEx-UIMA system, which mapped an extracted drug name/dose/form to both generalized and specific RxNorm concepts and translated drug frequency information to ISO standard. We processed 826 documents by both systems and verified that MedEx-UIMA and MedEx (the Python version) performed similarly by comparing both results. Using two manually annotated test sets that contained 300 drug entries from medication list and 300 drug entries from narrative reports, the MedEx-UIMA system achieved F-measures of 98.5% and 97.5% respectively for encoding drug names to corresponding RxNorm generic drug ingredients, and F-measures of 85.4% and 88.1% respectively for mapping drug names/dose/form to the most specific RxNorm concepts. It also achieved an F-measure of 90.4% for normalizing frequency information to ISO standard. The open source MedEx-UIMA system is freely available online at http://code.google.com/p/medex-uima/.

Information-reality complementarity in photonic weak measurements

NASA Astrophysics Data System (ADS)

Mancino, Luca; Sbroscia, Marco; Roccia, Emanuele; Gianani, Ilaria; Cimini, Valeria; Paternostro, Mauro; Barbieri, Marco

2018-06-01

The emergence of realistic properties is a key problem in understanding the quantum-to-classical transition. In this respect, measurements represent a way to interface quantum systems with the macroscopic world: these can be driven in the weak regime, where a reduced back-action can be imparted by choosing meter states able to extract different amounts of information. Here we explore the implications of such weak measurement for the variation of realistic properties of two-level quantum systems pre- and postmeasurement, and extend our investigations to the case of open systems implementing the measurements.

On Information Retrieval (IR) Systems: Revisiting Their Development, Evaluation Methodologies, and Assumptions (SIGs LAN, ED).

ERIC Educational Resources Information Center

Stirling, Keith

2000-01-01

Describes a session on information retrieval systems that planned to discuss relevance measures with Web-based information retrieval; retrieval system performance and evaluation; probabilistic independence of index terms; vector-based models; metalanguages and digital objects; how users assess the reliability, timeliness and bias of information;…

Technology-based management of environmental organizations using an Environmental Management Information System (EMIS): Design and development

NASA Astrophysics Data System (ADS)

Kouziokas, Georgios N.

2016-01-01

The adoption of Information and Communication Technologies (ICT) in environmental management has become a significant demand nowadays with the rapid growth of environmental information. This paper presents a prototype Environmental Management Information System (EMIS) that was developed to provide a systematic way of managing environmental data and human resources of an environmental organization. The system was designed using programming languages, a Database Management System (DBMS) and other technologies and programming tools and combines information from the relational database in order to achieve the principal goals of the environmental organization. The developed application can be used to store and elaborate information regarding: human resources data, environmental projects, observations, reports, data about the protected species, environmental measurements of pollutant factors or other kinds of analytical measurements and also the financial data of the organization. Furthermore, the system supports the visualization of spatial data structures by using geographic information systems (GIS) and web mapping technologies. This paper describes this prototype software application, its structure, its functions and how this system can be utilized to facilitate technology-based environmental management and decision-making process.

Construction of Weak and Strong Similarity Measures for Ordered Sets of Documents Using Fuzzy Set Techniques.

ERIC Educational Resources Information Center

Egghe, L.; Michel, C.

2003-01-01

Ordered sets (OS) of documents are encountered more and more in information distribution systems, such as information retrieval systems. Classical similarity measures for ordinary sets of documents need to be extended to these ordered sets. This is done in this article using fuzzy set techniques. The practical usability of the OS-measures is…

Item Banks for Measuring Emotional Distress from the Patient-Reported Outcomes Measurement Information System (PROMIS[R]): Depression, Anxiety, and Anger

ERIC Educational Resources Information Center

Pilkonis, Paul A.; Choi, Seung W.; Reise, Steven P.; Stover, Angela M.; Riley, William T.; Cella, David

2011-01-01

The authors report on the development and calibration of item banks for depression, anxiety, and anger as part of the Patient-Reported Outcomes Measurement Information System (PROMIS[R]). Comprehensive literature searches yielded an initial bank of 1,404 items from 305 instruments. After qualitative item analysis (including focus groups and…

Communication, Correlation and Complementarity

NASA Astrophysics Data System (ADS)

Schumacher, Benjamin Wade

1990-01-01

In quantum communication, a sender prepares a quantum system in a state corresponding to his message and conveys it to a receiver, who performs a measurement on it. The receiver acquires information about the message based on the outcome of his measurement. Since the state of a single quantum system is not always completely determinable from measurement, quantum mechanics limits the information capacity of such channels. According to a theorem of Kholevo, the amount of information conveyed by the channel can be no greater than the entropy of the ensemble of possible physical signals. The connection between information and entropy allows general theorems to be proved regarding the energy requirements of communication. For example, it can be shown that one particular quantum coding scheme, called thermal coding, uses energy with maximum efficiency. A close analogy between communication and quantum correlation can be made using Everett's notion of relative states. Kholevo's theorem can be used to prove that the mutual information of a pair of observables on different systems is bounded by the entropy of the state of each system. This confirms and extends an old conjecture of Everett. The complementarity of quantum observables can be described by information-theoretic uncertainty relations, several of which have been previously derived. These relations imply limits on the degree to which different messages can be coded in complementary observables of a single channel. Complementarity also restricts the amount of information that can be recovered from a given channel using a given decoding observable. Information inequalities can be derived which are analogous to the well-known Bell inequalities for correlated quantum systems. These inequalities are satisfied for local hidden variable theories but are violated by quantum systems, even where the correlation is weak. These information inequalities are metric inequalities for an "information distance", and their structure can be made exactly analogous to that of the familiar covariance Bell inequalities by introducing a "covariance distance". Similar inequalities derived for successive measurements on a single system are also violated in quantum mechanics.

Laser Doppler dust devil measurements

NASA Technical Reports Server (NTRS)

Bilbro, J. W.; Jeffreys, H. B.; Kaufman, J. W.; Weaver, E. A.

1977-01-01

A scanning laser doppler velocimeter (SLDV) system was used to detect, track, and measure the velocity flow field of naturally occurring tornado-like flows (dust devils) in the atmosphere. A general description of the dust devil phenomenon is given along with a description of the test program, measurement system, and data processing techniques used to collect information on the dust devil flow field. The general meteorological conditions occurring during the test program are also described, and the information collected on two selected dust devils are discussed in detail to show the type of information which can be obtained with a SLDV system. The results from these measurements agree well with those of other investigators and illustrate the potential for the SLDV in future endeavors.

Fission Meter Information Barrier Attribute Measurement System - NA-243 FNI/UKC FY2017 Task 1-2 Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kerr, P. L.; Decman, D.; Prasad, M.

An SNM attribute Information Barrier (IB) system was developed for a 2011 US/UK Exercise. The system was modified and extensively tested in a 2013-2014 US-UK Measurement Campaign. This work demonstrated rapid deployment of an IB system for potential treaty use. The system utilizes an Ortec Fission Meter neutron multiplicity counter and custom computer code. The system demonstrates a proof-of-principle automated Pu-240 mass determination with an information barrier. After a software start command is issued, the system automatically acquires and downloads data, performs an analysis, and displays the results. This system conveys the results of a Pu mass threshold measurements inmore » a way the does not reveal sensitive information. In full IB mode, only the pass/fail result is displayed as a “Mass <= Threshold Amount” or “Mass >= Threshold Amount” as shown in Figure 4. This can easily be adapted to a red/green “lights” display similar to the Detective IB system for Pu isotopics as shown in Figure 6. In test mode, more detailed information is displayed. The code can also read in, analyze, and display results from previously acquired or simulated data. Because the equipment is commercial-off-the-shelf (COTS), the system demonstrates a low-cost short-lead-time technology for treaty SNM attribute measurements. A deployed system will likely require integration of additional authentication and tamper-indicating technologies. This will be discussed for the project in this and future progress reports.« less

Evaluation of Software Simulation of Road Weather Information System.

DOT National Transportation Integrated Search

2016-09-01

A road weather information system (RWIS) is a combination of technologies that collects, transmits, models, and disseminates weather and road condition information. Sensors measure a range of weatherrelated conditions, including pavement temperatur...

Measures and Metrics of Information Processing in Complex Systems: A Rope of Sand

ERIC Educational Resources Information Center

James, Ryan Gregory

2013-01-01

How much information do natural systems store and process? In this work we attempt to answer this question in multiple ways. We first establish a mathematical framework where natural systems are represented by a canonical form of edge-labeled hidden fc models called e-machines. Then, utilizing this framework, a variety of measures are defined and…

Report on Research

DTIC Science & Technology

1989-06-01

Force systems require a resolved information on the optical thorough understanding of the propaga- extinction coefficient. Measurements of tion path , the...Depolarization as Function of Snow Density. Measurement System ). (It correlated well with the ( Multi -scatter scale length information is usable to extinction ...data on the effect of optically thin cirrus clouds on long - path infrared transmit- tance. Future system designers will have access to this new

32 CFR 2001.45 - Information controls.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 6 2013-07-01 2013-07-01 false Information controls. 2001.45 Section 2001.45....45 Information controls. (a) General. Agency heads shall establish a system of control measures which assure that access to classified information is provided to authorized persons. The control measures...

32 CFR 2001.45 - Information controls.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 6 2011-07-01 2011-07-01 false Information controls. 2001.45 Section 2001.45....45 Information controls. (a) General. Agency heads shall establish a system of control measures which assure that access to classified information is provided to authorized persons. The control measures...

32 CFR 2001.45 - Information controls.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Information controls. 2001.45 Section 2001.45....45 Information controls. (a) General. Agency heads shall establish a system of control measures which assure that access to classified information is provided to authorized persons. The control measures...

Optical tracking of nanoscale particles in microscale environments

NASA Astrophysics Data System (ADS)

Mathai, P. P.; Liddle, J. A.; Stavis, S. M.

2016-03-01

The trajectories of nanoscale particles through microscale environments record useful information about both the particles and the environments. Optical microscopes provide efficient access to this information through measurements of light in the far field from nanoparticles. Such measurements necessarily involve trade-offs in tracking capabilities. This article presents a measurement framework, based on information theory, that facilitates a more systematic understanding of such trade-offs to rationally design tracking systems for diverse applications. This framework includes the degrees of freedom of optical microscopes, which determine the limitations of tracking measurements in theory. In the laboratory, tracking systems are assemblies of sources and sensors, optics and stages, and nanoparticle emitters. The combined characteristics of such systems determine the limitations of tracking measurements in practice. This article reviews this tracking hardware with a focus on the essential functions of nanoparticles as optical emitters and microenvironmental probes. Within these theoretical and practical limitations, experimentalists have implemented a variety of tracking systems with different capabilities. This article reviews a selection of apparatuses and techniques for tracking multiple and single particles by tuning illumination and detection, and by using feedback and confinement to improve the measurements. Prior information is also useful in many tracking systems and measurements, which apply across a broad spectrum of science and technology. In the context of the framework and review of apparatuses and techniques, this article reviews a selection of applications, with particle diffusion serving as a prelude to tracking measurements in biological, fluid, and material systems, fabrication and assembly processes, and engineered devices. In so doing, this review identifies trends and gaps in particle tracking that might influence future research.

Information sensitivity functions to assess parameter information gain and identifiability of dynamical systems.

PubMed

Pant, Sanjay

2018-05-01

A new class of functions, called the 'information sensitivity functions' (ISFs), which quantify the information gain about the parameters through the measurements/observables of a dynamical system are presented. These functions can be easily computed through classical sensitivity functions alone and are based on Bayesian and information-theoretic approaches. While marginal information gain is quantified by decrease in differential entropy, correlations between arbitrary sets of parameters are assessed through mutual information. For individual parameters, these information gains are also presented as marginal posterior variances, and, to assess the effect of correlations, as conditional variances when other parameters are given. The easy to interpret ISFs can be used to (a) identify time intervals or regions in dynamical system behaviour where information about the parameters is concentrated; (b) assess the effect of measurement noise on the information gain for the parameters; (c) assess whether sufficient information in an experimental protocol (input, measurements and their frequency) is available to identify the parameters; (d) assess correlation in the posterior distribution of the parameters to identify the sets of parameters that are likely to be indistinguishable; and (e) assess identifiability problems for particular sets of parameters. © 2018 The Authors.

78 FR 74125 - Agency Information Collection Activities; Comment Request; Measuring Educational Gain in the...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-10

...; Comment Request; Measuring Educational Gain in the National Reporting System for Adult Education AGENCY... respondents, including through the use of information technology. Please note that written comments received... Educational Gain in the National Reporting System for Adult Education. OMB Control Number: 1830-0567. Type of...

Measuring the Performance of Document Supply Systems.

ERIC Educational Resources Information Center

Line, Maurice B.

Produced by Unesco as part of its program designed to help member states develop national information systems, including libraries, information services, and archives, this manual is a guide to document supply measurement techniques that are applicable to a wide range of countries. The first of seven chapters considers the objectives, nature, and…

Using waveform information in nonlinear data assimilation

NASA Astrophysics Data System (ADS)

Rey, Daniel; Eldridge, Michael; Morone, Uriel; Abarbanel, Henry D. I.; Parlitz, Ulrich; Schumann-Bischoff, Jan

2014-12-01

Information in measurements of a nonlinear dynamical system can be transferred to a quantitative model of the observed system to establish its fixed parameters and unobserved state variables. After this learning period is complete, one may predict the model response to new forces and, when successful, these predictions will match additional observations. This adjustment process encounters problems when the model is nonlinear and chaotic because dynamical instability impedes the transfer of information from the data to the model when the number of measurements at each observation time is insufficient. We discuss the use of information in the waveform of the data, realized through a time delayed collection of measurements, to provide additional stability and accuracy to this search procedure. Several examples are explored, including a few familiar nonlinear dynamical systems and small networks of Colpitts oscillators.

Organizational Productivity Measurement: The Development and Evaluation of an Integrated Approach.

DTIC Science & Technology

1987-07-01

measurement and aggregation strategy also has applications in management r information systems, performance appraisal , and other situations where multiple...larger organizational units. The basic measurement and aggregation strategy also has applications in manage- "".". ment information systems, criterion...much has been written on the subject of organizational productiv- ity, there is little consensus concerning its definition ( Tuttle , 1983). Such a lack

42 CFR 438.242 - Health information systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 4 2012-10-01 2012-10-01 false Health information systems. 438.242 Section 438.242 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Measurement and Improvement Standards § 438.242 Health information systems. (a) General rule. The State must...

42 CFR 438.242 - Health information systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 4 2014-10-01 2014-10-01 false Health information systems. 438.242 Section 438.242 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Measurement and Improvement Standards § 438.242 Health information systems. (a) General rule. The State must...

42 CFR 438.242 - Health information systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Health information systems. 438.242 Section 438.242 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Measurement and Improvement Standards § 438.242 Health information systems. (a) General rule. The State must...

42 CFR 438.242 - Health information systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 4 2013-10-01 2013-10-01 false Health information systems. 438.242 Section 438.242 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Measurement and Improvement Standards § 438.242 Health information systems. (a) General rule. The State must...

42 CFR 438.242 - Health information systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 4 2011-10-01 2011-10-01 false Health information systems. 438.242 Section 438.242 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Measurement and Improvement Standards § 438.242 Health information systems. (a) General rule. The State must...

Information System and Geographic Information System Tools in the Data Analyses of the Control Program for Visceral Leishmaniases from 2006 to 2010 in the Sanitary District of Venda Nova, Belo Horizonte, Minas Gerais, Brazil

PubMed Central

Saraiva, Lara; Leite, Camila Gonçalves; de Carvalho, Luiz Otávio Alves; Andrade Filho, José Dilermando; de Menezes, Fernanda Carvalho; Fiúza, Vanessa de Oliveira Pires

2012-01-01

The aim of this paper is to report a brief history of control actions for Visceral Leishmaniasis (VL) from 2006 to 2010 in the Sanitary District (DS) of Venda Nova, Belo Horizonte, Minas Gerais, Brazil, focusing on the use of information systems and Geographic Information System (GIS) tools. The analyses showed that the use of an automated database allied with geoprocessing tools may favor control measures of VL, especially with regard to the evaluation of control actions carried out. Descriptive analyses of control measures allowed to evaluating that the information system and GIS tools promoted greater efficiency in making decisions and planning activities. These analyses also pointed to the necessity of new approaches to the control of VL in large urban centers. PMID:22518168

Extracting and standardizing medication information in clinical text – the MedEx-UIMA system

PubMed Central

Jiang, Min; Wu, Yonghui; Shah, Anushi; Priyanka, Priyanka; Denny, Joshua C.; Xu, Hua

2014-01-01

Extraction of medication information embedded in clinical text is important for research using electronic health records (EHRs). However, most of current medication information extraction systems identify drug and signature entities without mapping them to standard representation. In this study, we introduced the open source Java implementation of MedEx, an existing high-performance medication information extraction system, based on the Unstructured Information Management Architecture (UIMA) framework. In addition, we developed new encoding modules in the MedEx-UIMA system, which mapped an extracted drug name/dose/form to both generalized and specific RxNorm concepts and translated drug frequency information to ISO standard. We processed 826 documents by both systems and verified that MedEx-UIMA and MedEx (the Python version) performed similarly by comparing both results. Using two manually annotated test sets that contained 300 drug entries from medication list and 300 drug entries from narrative reports, the MedEx-UIMA system achieved F-measures of 98.5% and 97.5% respectively for encoding drug names to corresponding RxNorm generic drug ingredients, and F-measures of 85.4% and 88.1% respectively for mapping drug names/dose/form to the most specific RxNorm concepts. It also achieved an F-measure of 90.4% for normalizing frequency information to ISO standard. The open source MedEx-UIMA system is freely available online at http://code.google.com/p/medex-uima/. PMID:25954575

Application of Fisher Information to Complex Dynamic Systems

EPA Science Inventory

Fisher information was developed by the statistician Ronald Fisher as a measure of the information obtainable from data being used to fit a related parameter. Starting from the work of Ronald Fisher1 and B. Roy Frieden2, we have developed Fisher information as a measure of order ...

Application of Fisher Information to Complex Dynamic Systems (Tucson)

EPA Science Inventory

Fisher information was developed by the statistician Ronald Fisher as a measure of the information obtainable from data being used to fit a related parameter. Starting from the work of Ronald Fisher1 and B. Roy Frieden2, we have developed Fisher information as a measure of order ...

Management accounting for advanced technological environments.

PubMed

Kaplan, R S

1989-08-25

Management accounting systems designed decades ago no longer provide timely, relevant information for companies in today's highly competitive environment. New operational control and performance measurement systems are recognizing the importance of direct measurement of quality, manufacturing lead times, flexibility, and customer responsiveness, as well as more accurate measures of the actual costs of consumed resources. Activity-based cost systems can assign the costs of indirect and support resources to the specific products and activities that benefit from these resources. Both operational control and activity-based systems represent new opportunities for improved managerial information in complex, technologically advanced environments.

Using Actigraphy and mHealth Systems for an Objective Analysis of Sleep Quality on Systemic Lupus Erythematosus Patients.

PubMed

Balderas-Díaz, Sara; Martínez, M Pilar; Guerrero-Contreras, Gabriel; Miró, Elena; Benghazi, Kawtar; Sánchez, Ana I; Garrido, José Luis; Prados, Germán

2017-03-23

Although sleep alterations can be an important factor contributing to the clinical state of Systemic Lupus Erythematosus, there are no studies to adequately assess sleep quality in this type of disease. The aim of this work is to analyse the sleep quality of Systemic Lupus Erythematous (SLE) patients based on more objective information provided by actigraphy and mobile systems. The idea is to carry out a comprehensive study by analysing how environmental conditions and factors can affect sleep quality. In traditional methods the information for assessing sleep quality is obtained through questionnaires. In this work, a novel method is proposed by combining these questionnaires that provide valuable but subjective information with actigraphy and a mobile system to collect more objective information about the patient and their environment. The method provides mechanisms to detect how sleep hygiene could be associated directly with the sleep quality of the subjects, in order to provide a custom intervention to SLE patients. Moreover, this alternative provides ease of use, and non-intrusive ICT (Information and Communication Technology) through a wristband and a mHealth system. The mHealth system has been developed for environmental conditions sensing. This consists of a mobile device with built-in sensors providing input data about the bedroom environment during sleep, and a set of services of the Environmental Monitoring System for properly managing the configuration, registration and fusion of those input data. In previous studies, this information has never been taken into account. However, the information could be relevant in the case of SLE patients. The sample is composed of 9 women with SLE and 11 matched controls with a mean age of 35.78 and 32.18, respectively. Demographic and clinical variables between SLE patients and healthy controls are compared using the Fisher exact test and the Mann-Whitney U test. Relationships between psychological variables, actigraphy measures, and variables related to environmental conditions are analysed with Spearman's rank correlation coefficient. The SLE group showed poorer sleep quality, and more pain intensity, fatigue and depression than the healthy controls. Significant differences between SLE women and healthy controls in measures of actigraphy were not found. However, the fusion of the measures of the environmental conditions that were collected by the mobile system and actigraphy, has shown that light, and more specifically temperature have a direct relation with several measures of actigraphy which are related to sleep quality. It should be emphasize this result because usually the sleep problems are assessment through self-reported measures which had not revealed this association. Moreover, there are no previous studies that analyse these aspects in bedroom environments of SLE patients directly from objective measures. The results indicate the need to complement the subjective evaluation of sleep with objective measures. The use of actigraphy in combination with a new mHealth system provides a complete assessment especially relevant to chronic conditions as SLE. Both systems incorporate this objective information directly from objective measures in a non-intrusive way. Moreover, the measures of bedroom environmental variables provide useful and relevant clinical information to assess what is happening daily and not occasionally. This could lead to more customized interventions and adapt the treatment to each individual.

Single-snapshot 2D color measurement by plenoptic imaging system

NASA Astrophysics Data System (ADS)

Masuda, Kensuke; Yamanaka, Yuji; Maruyama, Go; Nagai, Sho; Hirai, Hideaki; Meng, Lingfei; Tosic, Ivana

2014-03-01

Plenoptic cameras enable capture of directional light ray information, thus allowing applications such as digital refocusing, depth estimation, or multiband imaging. One of the most common plenoptic camera architectures contains a microlens array at the conventional image plane and a sensor at the back focal plane of the microlens array. We leverage the multiband imaging (MBI) function of this camera and develop a single-snapshot, single-sensor high color fidelity camera. Our camera is based on a plenoptic system with XYZ filters inserted in the pupil plane of the main lens. To achieve high color measurement precision of this system, we perform an end-to-end optimization of the system model that includes light source information, object information, optical system information, plenoptic image processing and color estimation processing. Optimized system characteristics are exploited to build an XYZ plenoptic colorimetric camera prototype that achieves high color measurement precision. We describe an application of our colorimetric camera to color shading evaluation of display and show that it achieves color accuracy of ΔE<0.01.

Information quality measurement of medical encoding support based on usability.

PubMed

Puentes, John; Montagner, Julien; Lecornu, Laurent; Cauvin, Jean-Michel

2013-12-01

Medical encoding support systems for diagnoses and medical procedures are an emerging technology that begins to play a key role in billing, reimbursement, and health policies decisions. A significant problem to exploit these systems is how to measure the appropriateness of any automatically generated list of codes, in terms of fitness for use, i.e. their quality. Until now, only information retrieval performance measurements have been applied to estimate the accuracy of codes lists as quality indicator. Such measurements do not give the value of codes lists for practical medical encoding, and cannot be used to globally compare the quality of multiple codes lists. This paper defines and validates a new encoding information quality measure that addresses the problem of measuring medical codes lists quality. It is based on a usability study of how expert coders and physicians apply computer-assisted medical encoding. The proposed measure, named ADN, evaluates codes Accuracy, Dispersion and Noise, and is adapted to the variable length and content of generated codes lists, coping with limitations of previous measures. According to the ADN measure, the information quality of a codes list is fully represented by a single point, within a suitably constrained feature space. Using one scheme, our approach is reliable to measure and compare the information quality of hundreds of codes lists, showing their practical value for medical encoding. Its pertinence is demonstrated by simulation and application to real data corresponding to 502 inpatient stays in four clinic departments. Results are compared to the consensus of three expert coders who also coded this anonymized database of discharge summaries, and to five information retrieval measures. Information quality assessment applying the ADN measure showed the degree of encoding-support system variability from one clinic department to another, providing a global evaluation of quality measurement trends. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Evaluation methodologies for an advanced information processing system

NASA Technical Reports Server (NTRS)

Schabowsky, R. S., Jr.; Gai, E.; Walker, B. K.; Lala, J. H.; Motyka, P.

1984-01-01

The system concept and requirements for an Advanced Information Processing System (AIPS) are briefly described, but the emphasis of this paper is on the evaluation methodologies being developed and utilized in the AIPS program. The evaluation tasks include hardware reliability, maintainability and availability, software reliability, performance, and performability. Hardware RMA and software reliability are addressed with Markov modeling techniques. The performance analysis for AIPS is based on queueing theory. Performability is a measure of merit which combines system reliability and performance measures. The probability laws of the performance measures are obtained from the Markov reliability models. Scalar functions of this law such as the mean and variance provide measures of merit in the AIPS performability evaluations.

Variation in information needs and quality: implications for public health surveillance and biomedical informatics.

PubMed

Dixon, Brian E; Lai, Patrick T S; Grannis, Shaun J

2013-01-01

Understanding variation among users' information needs and the quality of information in an electronic system is important for informaticians to ensure data are fit-for-use in answering important questions in clinical and public health. To measure variation in satisfaction with currently reported data, as well as perceived importance and need with respect to completeness and timeliness, we surveyed epidemiologists and other public health professionals across multiple jurisdictions. We observed consensus for some data elements, such as county of residence, which respondents perceived as important and felt should always be reported. However information needs differed for many data elements, especially when comparing notifiable diseases such as chlamydia to seasonal (influenza) and chronic (diabetes) diseases. Given the trend towards greater volume and variety of data as inputs to surveillance systems, variation of information needs impacts system design and practice. Systems must be flexible and highly configurable to accommodate variation, and informaticians must measure and improve systems and business processes to accommodate for variation of both users and information.

Silicon surface barrier detectors used for liquid hydrogen density measurement

NASA Technical Reports Server (NTRS)

James, D. T.; Milam, J. K.; Winslett, H. B.

1968-01-01

Multichannel system employing a radioisotope radiation source, strontium-90, radiation detector, and a silicon surface barrier detector, measures the local density of liquid hydrogen at various levels in a storage tank. The instrument contains electronic equipment for collecting the density information, and a data handling system for processing this information.

49 CFR 15.5 - Sensitive security information.

Code of Federal Regulations, 2014 CFR

2014-10-01

... sources and methods used to gather or develop threat information, including threats against cyber infrastructure. (8) Security measures. Specific details of aviation or maritime transportation security measures... infrastructure asset information. Any list identifying systems or assets, whether physical or virtual, so vital...

49 CFR 15.5 - Sensitive security information.

Code of Federal Regulations, 2011 CFR

2011-10-01

... sources and methods used to gather or develop threat information, including threats against cyber infrastructure. (8) Security measures. Specific details of aviation or maritime transportation security measures... infrastructure asset information. Any list identifying systems or assets, whether physical or virtual, so vital...

49 CFR 15.5 - Sensitive security information.

Code of Federal Regulations, 2013 CFR

2013-10-01

... sources and methods used to gather or develop threat information, including threats against cyber infrastructure. (8) Security measures. Specific details of aviation or maritime transportation security measures... infrastructure asset information. Any list identifying systems or assets, whether physical or virtual, so vital...

49 CFR 15.5 - Sensitive security information.

Code of Federal Regulations, 2012 CFR

2012-10-01

... sources and methods used to gather or develop threat information, including threats against cyber infrastructure. (8) Security measures. Specific details of aviation or maritime transportation security measures... infrastructure asset information. Any list identifying systems or assets, whether physical or virtual, so vital...

Information Measures for Multisensor Systems

DTIC Science & Technology

2013-12-11

permuted to generate spectra that were non- physical but preserved the entropy of the source spectra. Another 1000 spectra were constructed to mimic co...Research Laboratory (NRL) has yielded probabilistic models for spectral data that enable the computation of information measures such as entropy and...22308 Chemical sensing Information theory Spectral data Information entropy Information divergence Mass spectrometry Infrared spectroscopy Multisensor

Performance monitor system functional simulator, environmental data, orbiter 101(HFT)

NASA Technical Reports Server (NTRS)

Parker, F. W.

1974-01-01

Information concerning the environment component of the space shuttle performance monitor system simulator (PMSS) and those subsystems operational on the shuttle orbiter 101 used for horizontal flight test (HFT) is provided, along with detailed data for the shuttle performance monitor system (PMS) whose software requirements evolve from three basic PMS functions: (1) fault detection and annunciation; (2) subsystem measurement management; and (3) subsystem configuration management. Information relative to the design and operation of Orbiter systems for HFT is also presented, and the functional paths are identified to the lowest level at which the crew can control the system functions. Measurement requirements are given which are necessary to adequately monitor the health status of the system. PMS process requirements, relative to the measurements which are necessary for fault detection and annunciation of a failed functional path, consist of measurement characteristics, tolerance limits, precondition tests, and correlation measurements.

Optical tracking of nanoscale particles in microscale environments

PubMed Central

Mathai, P. P.; Liddle, J. A.; Stavis, S. M.

2016-01-01

The trajectories of nanoscale particles through microscale environments record useful information about both the particles and the environments. Optical microscopes provide efficient access to this information through measurements of light in the far field from nanoparticles. Such measurements necessarily involve trade-offs in tracking capabilities. This article presents a measurement framework, based on information theory, that facilitates a more systematic understanding of such trade-offs to rationally design tracking systems for diverse applications. This framework includes the degrees of freedom of optical microscopes, which determine the limitations of tracking measurements in theory. In the laboratory, tracking systems are assemblies of sources and sensors, optics and stages, and nanoparticle emitters. The combined characteristics of such systems determine the limitations of tracking measurements in practice. This article reviews this tracking hardware with a focus on the essential functions of nanoparticles as optical emitters and microenvironmental probes. Within these theoretical and practical limitations, experimentalists have implemented a variety of tracking systems with different capabilities. This article reviews a selection of apparatuses and techniques for tracking multiple and single particles by tuning illumination and detection, and by using feedback and confinement to improve the measurements. Prior information is also useful in many tracking systems and measurements, which apply across a broad spectrum of science and technology. In the context of the framework and review of apparatuses and techniques, this article reviews a selection of applications, with particle diffusion serving as a prelude to tracking measurements in biological, fluid, and material systems, fabrication and assembly processes, and engineered devices. In so doing, this review identifies trends and gaps in particle tracking that might influence future research. PMID:27213022

Revitalizing executive information systems.

PubMed

Crockett, F

1992-01-01

As the saying goes, "garbage in, garbage out"--and this is as true for executive information systems as for any other computer system. Crockett presents a methodology he has used with clients to help them develop more useful systems that produce higher quality information. The key is to develop performance measures based on critical success factors and stakeholder expectations and then to link them cross functionally to show how progress is being made on strategic goals. Feedback from the executive information system then informs strategy formulation, business plan development, and operational activities.

Concept of Integrated Information Systems of Rail Transport

NASA Astrophysics Data System (ADS)

Siergiejczyk, Mirosław; Gago, Stanisław

This paper will present a need to create integrated information systems of the rail transport and their links with other means of public transportation. IT standards will be discussed that are expected to create the integrated information systems of the rail transport. Also the main tasks will be presented of centralized information systems, the concept of their architecture, business processes and their implementation as well as the proposed measures to secure data. A method shall be proposed to implement a system to inform participants of rail transport in Polish conditions.

Methodology development for quantitative optimization of security enhancement in medical information systems -Case study in a PACS and a multi-institutional radiotherapy database-.

PubMed

Haneda, Kiyofumi; Umeda, Tokuo; Koyama, Tadashi; Harauchi, Hajime; Inamura, Kiyonari

2002-01-01

The target of our study is to establish the methodology for analyzing level of security requirements, for searching suitable security measures and for optimizing security distribution to every portion of medical practice. Quantitative expression must be introduced to our study as possible for the purpose of easy follow up of security procedures and easy evaluation of security outcomes or results. Results of system analysis by fault tree analysis (FTA) clarified that subdivided system elements in detail contribute to much more accurate analysis. Such subdivided composition factors very much depended on behavior of staff, interactive terminal devices, kinds of service, and routes of network. As conclusion, we found the methods to analyze levels of security requirements for each medical information systems employing FTA, basic events for each composition factor and combination of basic events. Methods for searching suitable security measures were found. Namely risk factors for each basic event, number of elements for each composition factor and candidates of security measure elements were found. Method to optimize the security measures for each medical information system was proposed. Namely optimum distribution of risk factors in terms of basic events were figured out, and comparison of them between each medical information systems became possible.

Experimental demonstration of information to energy conversion in a quantum system at the Landauer limit.

PubMed

Peterson, J P S; Sarthour, R S; Souza, A M; Oliveira, I S; Goold, J; Modi, K; Soares-Pinto, D O; Céleri, L C

2016-04-01

Landauer's principle sets fundamental thermodynamical constraints for classical and quantum information processing, thus affecting not only various branches of physics, but also of computer science and engineering. Despite its importance, this principle was only recently experimentally considered for classical systems. Here we employ a nuclear magnetic resonance set-up to experimentally address the information to energy conversion in a quantum system. Specifically, we consider a three nuclear spins [Formula: see text] (qubits) molecule-the system, the reservoir and the ancilla-to measure the heat dissipated during the implementation of a global system-reservoir unitary interaction that changes the information content of the system. By employing an interferometric technique, we were able to reconstruct the heat distribution associated with the unitary interaction. Then, through quantum state tomography, we measured the relative change in the entropy of the system. In this way, we were able to verify that an operation that changes the information content of the system must necessarily generate heat in the reservoir, exactly as predicted by Landauer's principle. The scheme presented here allows for the detailed study of irreversible entropy production in quantum information processors.

Teacher Feedback and Student Academic Achievement: Teacher Use of Student Information Systems

ERIC Educational Resources Information Center

Bishop, Daniel J.

2013-01-01

In an era of professional standards for educators and teacher evaluations linked to measures of student achievement, researchers use data from student information systems to address research questions linking teacher feedback to student achievement. A quantitative study of teacher use of the Skyward student information system (SIS) was conducted…

Building Assured Systems Framework

DTIC Science & Technology

2010-09-01

of standards such as ISO 27001 as frameworks [NASCIO 2009]. In this context, a framework is a standard intended to assist in auditing and compliance...Information Security ISO /IEC 27004 Information technology – Security techniques - Information security management measurement ISO /IEC 15939, System and

Item Banks for Measuring Emotional Distress From the Patient-Reported Outcomes Measurement Information System (PROMIS®): Depression, Anxiety, and Anger

PubMed Central

Pilkonis, Paul A.; Choi, Seung W.; Reise, Steven P.; Stover, Angela M.; Riley, William T.; Cella, David

2011-01-01

The authors report on the development and calibration of item banks for depression, anxiety, and anger as part of the Patient-Reported Outcomes Measurement Information System (PROMIS®). Comprehensive literature searches yielded an initial bank of 1,404 items from 305 instruments. After qualitative item analysis (including focus groups and cognitive interviewing), 168 items (56 for each construct) were written in a first person, past tense format with a 7-day time frame and five response options reflecting frequency. The calibration sample included nearly 15,000 respondents. Final banks of 28, 29, and 29 items were calibrated for depression, anxiety, and anger, respectively, using item response theory. Test information curves showed that the PROMIS item banks provided more information than conventional measures in a range of severity from approximately −1 to +3 standard deviations (with higher scores indicating greater distress). Short forms consisting of seven to eight items provided information comparable to legacy measures containing more items. PMID:21697139

Item banks for measuring emotional distress from the Patient-Reported Outcomes Measurement Information System (PROMIS®): depression, anxiety, and anger.

PubMed

Pilkonis, Paul A; Choi, Seung W; Reise, Steven P; Stover, Angela M; Riley, William T; Cella, David

2011-09-01

The authors report on the development and calibration of item banks for depression, anxiety, and anger as part of the Patient-Reported Outcomes Measurement Information System (PROMIS®). Comprehensive literature searches yielded an initial bank of 1,404 items from 305 instruments. After qualitative item analysis (including focus groups and cognitive interviewing), 168 items (56 for each construct) were written in a first person, past tense format with a 7-day time frame and five response options reflecting frequency. The calibration sample included nearly 15,000 respondents. Final banks of 28, 29, and 29 items were calibrated for depression, anxiety, and anger, respectively, using item response theory. Test information curves showed that the PROMIS item banks provided more information than conventional measures in a range of severity from approximately -1 to +3 standard deviations (with higher scores indicating greater distress). Short forms consisting of seven to eight items provided information comparable to legacy measures containing more items.

Understanding Interdependencies between Heterogeneous Earth Observation Systems When Applied to Federal Objectives

NASA Astrophysics Data System (ADS)

Gallo, J.; Sylak-Glassman, E.

2017-12-01

We will present a method for assessing interdependencies between heterogeneous Earth observation (EO) systems when applied to key Federal objectives. Using data from the National Earth Observation Assessment (EOA), we present a case study that examines the frequency that measurements from each of the Landsat 8 sensors are used in conjunction with heterogeneous measurements from other Earth observation sensors to develop data and information products. This EOA data allows us to map the most frequent interactions between Landsat measurements and measurements from other sensors, identify high-impact data and information products where these interdependencies occur, and identify where these combined measurements contribute most to meeting a key Federal objective within one of the 13 Societal Benefit Areas used in the EOA study. Using a value-tree framework to trace the application of data from EO systems to weighted key Federal objectives within the EOA study, we are able to estimate relative contribution of individual EO systems to meeting those objectives, as well as the interdependencies between measurements from all EO systems within the EOA study. The analysis relies on a modified Delphi method to elicit relative levels of reliance on individual measurements from EO systems, including combinations of measurements, from subject matter experts. This results in the identification of a representative portfolio of all EO systems used to meet key Federal objectives. Understanding the interdependencies among a heterogeneous set of measurements that modify the impact of any one individual measurement on meeting a key Federal objective, especially if the measurements originate from multiple agencies or state/local/tribal, international, academic, and commercial sources, can impact agency decision-making regarding mission requirements and inform understanding of user needs.

Bayes' theorem application in the measure information diagnostic value assessment

NASA Astrophysics Data System (ADS)

Orzechowski, Piotr D.; Makal, Jaroslaw; Nazarkiewicz, Andrzej

2006-03-01

The paper presents Bayesian method application in the measure information diagnostic value assessment that is used in the computer-aided diagnosis system. The computer system described here has been created basing on the Bayesian Network and is used in Benign Prostatic Hyperplasia (BPH) diagnosis. The graphic diagnostic model enables to juxtapose experts' knowledge with data.

Resource, quality and safety management.

PubMed

Hovenga, Evelyn J S

2010-01-01

This chapter gives an educational overview of: * Resource management relative to sustainability and the use casemix systems * Types of resources and their information system needs to support their optimal management * Quality, performance measurement options and associated information needs * Casemix systems' characteristics, usage and need for enterprise systems.

System of Programmed Modules for Measuring Photographs with a Gamma-Telescope

NASA Technical Reports Server (NTRS)

Averin, S. A.; Veselova, G. V.; Navasardyan, G. V.

1978-01-01

Physical experiments using tracking cameras resulted in hundreds of thousands of stereo photographs of events being received. To process such a large volume of information, automatic and semiautomatic measuring systems are required. At the Institute of Space Research of the Academy of Science of the USSR, a system for processing film information from the spark gamma-telescope was developed. The system is based on a BPS-75 projector in line with the minicomputer Elektronika 1001. The report describes this system. The various computer programs available to the operators are discussed.

22 CFR 140.6 - Foreign government entities.

Code of Federal Regulations, 2010 CFR

2010-04-01

... measures taken. (6) A decision to withhold assistance or to take other measures based on information or... Coordinator shall be responsible for establishing a system for reviewing available information regarding... proposed recipient is located or, as appropriate, where assistance is to be provided, the information...

Stückelberg formulation of holography

NASA Astrophysics Data System (ADS)

Dvali, Gia; Gomez, Cesar; Wintergerst, Nico

2016-10-01

We suggest that holography can be formulated in terms of the information capacity of the Stückelberg degrees of freedom that maintain gauge invariance of the theory in the presence of an information boundary. These Stückelbergs act as qubits that account for a certain fraction of quantum information. Their information capacity is measured by the ratio of the inverse Stückelberg energy gap to the size of the system. Systems with the smallest gap are maximally holographic. For massless gauge systems this information measure is universally equal to the inverse coupling evaluated at the systems' length scale. In this language it becomes very transparent why the Stückelberg information capacity of black holes saturates the Bekenstein bound and accounts for the entire information of the system. The physical reason is that the strength of quantum interaction is bounded from below by the gravitational coupling, which scales as area. Observing the striking similarity between the scalings of the energy gap of the boundary Stückelberg modes and the Bogoliubov modes of critical many-body systems, we establish a connection between holography and quantum criticality through the correspondence between these modes.

Learning to leverage existing information systems: Part 1. Principles.

PubMed

Neil, Nancy; Nerenz, David

2003-10-01

The success of performance improvement efforts depends on effective measurement and feedback regarding clinical processes and outcomes. Yet most health care organizations have fragmented rather than integrated data systems. Methods and practical guidance are provided for leveraging available information sources to obtain and create valid performance improvement-related information for use by clinicians and administrators. At Virginia Mason Health System (VMHS; Seattle), a vertically integrated hospital and multispecialty group practice, patient records are paper based and are supplemented with electronic reporting for laboratory and radiology services. Despite growth in the resources and interest devoted to organization-wide performance measurement, quality improvement, and evidence-based tools, VMHS's information systems consist of largely stand-alone, legacy systems organized around the ability to retrieve information on patients, one at a time. By 2002, without any investment in technology, VMHS had developed standardized, clinic-wide key indicators of performance updated and reported regularly at the patient, provider, site, and organizational levels. On the basis of VHMS's experience, principles can be suggested to guide other organizations to explore solutions using their own information systems: for example, start simply, but start; identify information needs; tap multiple data streams; and improve incrementally.

The von Neumann model of measurement in quantum mechanics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mello, Pier A.

2014-01-08

We describe how to obtain information on a quantum-mechanical system by coupling it to a probe and detecting some property of the latter, using a model introduced by von Neumann, which describes the interaction of the system proper with the probe in a dynamical way. We first discuss single measurements, where the system proper is coupled to one probe with arbitrary coupling strength. The goal is to obtain information on the system detecting the probe position. We find the reduced density operator of the system, and show how Lüders rule emerges as the limiting case of strong coupling. The vonmore » Neumann model is then generalized to two probes that interact successively with the system proper. Now we find information on the system by detecting the position-position and momentum-position correlations of the two probes. The so-called 'Wigner's formula' emerges in the strong-coupling limit, while 'Kirkwood's quasi-probability distribution' is found as the weak-coupling limit of the above formalism. We show that successive measurements can be used to develop a state-reconstruction scheme. Finally, we find a generalized transform of the state and the observables based on the notion of successive measurements.« less

78 FR 76391 - Proposed Enhancements to the Motor Carrier Safety Measurement System (SMS) Public Web Site

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-17

...-0392] Proposed Enhancements to the Motor Carrier Safety Measurement System (SMS) Public Web Site AGENCY... proposed enhancements to the display of information on the Agency's Safety Measurement System (SMS) public Web site. On December 6, 2013, Advocates [[Page 76392

Evaluating the sustainability of a regional system using Fisher information in the San Luis Basin, Colorado

EPA Science Inventory

This paper describes the theory, data, and methodology necessary for using Fisher information to assess the sustainability of the San Luis Basin (SLB) regional system over time. Fisher information was originally developed as a measure of the information content in data and is an ...

Large deviation analysis of a simple information engine

NASA Astrophysics Data System (ADS)

Maitland, Michael; Grosskinsky, Stefan; Harris, Rosemary J.

2015-11-01

Information thermodynamics provides a framework for studying the effect of feedback loops on entropy production. It has enabled the understanding of novel thermodynamic systems such as the information engine, which can be seen as a modern version of "Maxwell's Dæmon," whereby a feedback controller processes information gained by measurements in order to extract work. Here, we analyze a simple model of such an engine that uses feedback control based on measurements to obtain negative entropy production. We focus on the distribution and fluctuations of the information obtained by the feedback controller. Significantly, our model allows an analytic treatment for a two-state system with exact calculation of the large deviation rate function. These results suggest an approximate technique for larger systems, which is corroborated by simulation data.

Developing a theoretical model and questionnaire survey instrument to measure the success of electronic health records in residential aged care

PubMed Central

Yu, Ping; Qian, Siyu

2018-01-01

Electronic health records (EHR) are introduced into healthcare organizations worldwide to improve patient safety, healthcare quality and efficiency. A rigorous evaluation of this technology is important to reduce potential negative effects on patient and staff, to provide decision makers with accurate information for system improvement and to ensure return on investment. Therefore, this study develops a theoretical model and questionnaire survey instrument to assess the success of organizational EHR in routine use from the viewpoint of nursing staff in residential aged care homes. The proposed research model incorporates six variables in the reformulated DeLone and McLean information systems success model: system quality, information quality, service quality, use, user satisfaction and net benefits. Two variables training and self-efficacy were also incorporated into the model. A questionnaire survey instrument was designed to measure the eight variables in the model. After a pilot test, the measurement scale was used to collect data from 243 nursing staff members in 10 residential aged care homes belonging to three management groups in Australia. Partial least squares path modeling was conducted to validate the model. The validated EHR systems success model predicts the impact of the four antecedent variables—training, self-efficacy, system quality and information quality—on the net benefits, the indicator of EHR systems success, through the intermittent variables use and user satisfaction. A 24-item measurement scale was developed to quantitatively evaluate the performance of an EHR system. The parsimonious EHR systems success model and the measurement scale can be used to benchmark EHR systems success across organizations and units and over time. PMID:29315323

Developing a theoretical model and questionnaire survey instrument to measure the success of electronic health records in residential aged care.

PubMed

Yu, Ping; Qian, Siyu

2018-01-01

Electronic health records (EHR) are introduced into healthcare organizations worldwide to improve patient safety, healthcare quality and efficiency. A rigorous evaluation of this technology is important to reduce potential negative effects on patient and staff, to provide decision makers with accurate information for system improvement and to ensure return on investment. Therefore, this study develops a theoretical model and questionnaire survey instrument to assess the success of organizational EHR in routine use from the viewpoint of nursing staff in residential aged care homes. The proposed research model incorporates six variables in the reformulated DeLone and McLean information systems success model: system quality, information quality, service quality, use, user satisfaction and net benefits. Two variables training and self-efficacy were also incorporated into the model. A questionnaire survey instrument was designed to measure the eight variables in the model. After a pilot test, the measurement scale was used to collect data from 243 nursing staff members in 10 residential aged care homes belonging to three management groups in Australia. Partial least squares path modeling was conducted to validate the model. The validated EHR systems success model predicts the impact of the four antecedent variables-training, self-efficacy, system quality and information quality-on the net benefits, the indicator of EHR systems success, through the intermittent variables use and user satisfaction. A 24-item measurement scale was developed to quantitatively evaluate the performance of an EHR system. The parsimonious EHR systems success model and the measurement scale can be used to benchmark EHR systems success across organizations and units and over time.

Systems and methods for pressure and temperature measurement

DOEpatents

Challener, William Albert; Airey, Li

2016-12-06

A measurement system in one embodiment includes an acquisition module and a determination module. The acquisition module is configured to acquire resonant frequency information corresponding to a sensor disposed in a remote location from the acquisition module. The resonant frequency information includes first resonant frequency information for a first resonant frequency of the sensor corresponding to environmental conditions of the remote location, and also includes second resonant frequency information for a different, second resonant frequency of the sensor corresponding to the environmental conditions of the remote location. The determination module is configured to use the first resonant frequency information and the second resonant frequency information to determine the temperature and the pressure at the remote location.

Position measurement of the direct drive motor of Large Aperture Telescope

NASA Astrophysics Data System (ADS)

Li, Ying; Wang, Daxing

2010-07-01

Along with the development of space and astronomy science, production of large aperture telescope and super large aperture telescope will definitely become the trend. It's one of methods to solve precise drive of large aperture telescope using direct drive technology unified designed of electricity and magnetism structure. A direct drive precise rotary table with diameter of 2.5 meters researched and produced by us is a typical mechanical & electrical integration design. This paper mainly introduces position measurement control system of direct drive motor. In design of this motor, position measurement control system requires having high resolution, and precisely aligning the position of rotor shaft and making measurement, meanwhile transferring position information to position reversing information corresponding to needed motor pole number. This system has chosen high precision metal band coder and absolute type coder, processing information of coders, and has sent 32-bit RISC CPU making software processing, and gained high resolution composite coder. The paper gives relevant laboratory test results at the end, indicating the position measurement can apply to large aperture telescope control system. This project is subsidized by Chinese National Natural Science Funds (10833004).

Technical and economic assessment of design efficiency of information and measuring systems

NASA Astrophysics Data System (ADS)

Yurov, V. M.; Eremin, E. N.; Baisagov, Ya Zh; Arkhipov, V. V.

2018-01-01

A thermodynamic approach to the analysis of information-measuring systems (IMS) is developed in the work. Expressions for efficiency of IMS are obtained. The connection between the amount of processor memory and the amount of incoming information and the accuracy of the IMS is obtained. It is shown that the probability of information loss in IMS decreases with the increase in the amount of information from the object. Using the analogy method, economic aspects of IMS design are considered. The innate ability of IMS and Moore’s law are considered. The proposed approach and the resulting formulas will be useful in the design of new IMS.

Accuracy increase of the coordinate measurement based on the model production of geometrical parts specifications

NASA Astrophysics Data System (ADS)

Zlatkina, O. Yu

2018-04-01

There is a relationship between the service properties of component parts and their geometry; therefore, to predict and control the operational characteristics of parts and machines, it is necessary to measure their geometrical specifications. In modern production, a coordinate measuring machine is the advanced measuring instrument of the products geometrical specifications. The analysis of publications has shown that during the coordinate measurements the problems of choosing locating chart of parts and coordination have not been sufficiently studied. A special role in the coordination of the part is played by the coordinate axes informational content. Informational content is the sum of the degrees of freedom limited by the elementary item of a part. The coordinate planes of a rectangular coordinate system have different informational content (three, two, and one). The coordinate axes have informational content of four, two and zero. The higher the informational content of the coordinate plane or axis, the higher its priority for reading angular and linear coordinates is. The geometrical model production of the coordinate measurements object taking into account the information content of coordinate planes and coordinate axes allows us to clearly reveal the interrelationship of the coordinates of the deviations in location, sizes and deviations of their surfaces shape. The geometrical model helps to select the optimal locating chart of parts for bringing the machine coordinate system to the part coordinate system. The article presents an algorithm the model production of geometrical specifications using the example of the piston rod of a compressor.

Development of Field Information Monitoring System Based on the Internet of Things

NASA Astrophysics Data System (ADS)

Cai, Ken; Liang, Xiaoying; Wang, Keqiang

With the rapid development and wide application of electronics, communication and embedded system technologies, the global agriculture is changing from traditional agriculture that is to improve the production relying on the increase of labor, agricultural inputs to the new stage of modern agriculture with low yields, high efficiency, real-time and accuracy. On the other hand the research and development of the Internet of Things, which is an information network to connect objects, with the full capacity to perceive objects, and having the capabilities of reliable transmission and intelligence processing for information, allows us to obtain real-time information of anything. The application of the Internet of Things in field information online monitoring is an effective solution for present wired sensor monitoring system, which has much more disadvantages, such as high cost, the problems of laying lines and so on. In this paper, a novel field information monitoring system based on the Internet of Things is proposed. It can satisfy the requirements of multi-point measurement, mobility, convenience in the field information monitoring process. The whole structure of system is given and the key designs of system design are described in the hardware and software aspect. The studies have expanded current field information measurement methods and strengthen the application of the Internet of Things.

Performance measurement for ambulatory care: moving towards a new agenda.

PubMed

Roski, J; Gregory, R

2001-12-01

Despite a shift in care delivery from inpatient to ambulatory care, performance measurement efforts for the different levels in ambulatory care settings such as individual physicians, individual clinics and physician organizations have not been widely instituted in the United States (U.S.). The Health Plan Employer Data and Information Set (HEDIS), the most widely used performance measurement set in the U.S., includes a number of measures that evaluate preventive and chronic care provided in ambulatory care facilities. While HEDIS has made important contributions to the tracking of ambulatory care quality, it is becoming increasingly apparent that the measurement set could be improved by providing quality of care information at the levels of greatest interest to consumers and purchasers of care, namely for individual physicians, clinics and physician organizations. This article focuses on the improvement opportunities for quality performance measurement systems in ambulatory care. Specific challenges to creating a sustainable performance measurement system at the level of physician organizations, such as defining the purpose of the system, the accountability logic, information and reporting needs and mechanisms for sustainable implementation, are discussed.

Vision and dual IMU integrated attitude measurement system

NASA Astrophysics Data System (ADS)

Guo, Xiaoting; Sun, Changku; Wang, Peng; Lu, Huang

2018-01-01

To determination relative attitude between two space objects on a rocking base, an integrated system based on vision and dual IMU (inertial determination unit) is built up. The determination system fuses the attitude information of vision with the angular determinations of dual IMU by extended Kalman filter (EKF) to obtain the relative attitude. One IMU (master) is attached to the measured motion object and the other (slave) to the rocking base. As the determination output of inertial sensor is relative to inertial frame, thus angular rate of the master IMU includes not only motion of the measured object relative to inertial frame but also the rocking base relative to inertial frame, where the latter can be seen as redundant harmful movement information for relative attitude determination between the measured object and the rocking base. The slave IMU here assists to remove the motion information of rocking base relative to inertial frame from the master IMU. The proposed integrated attitude determination system is tested on practical experimental platform. And experiment results with superior precision and reliability show the feasibility and effectiveness of the proposed attitude determination system.

Primary Care Performance Measurement and Reporting at a Regional Level: Could a Matrix Approach Provide Actionable Information for Policy Makers and Clinicians?

PubMed

Langton, Julia M; Wong, Sabrina T; Johnston, Sharon; Abelson, Julia; Ammi, Mehdi; Burge, Fred; Campbell, John; Haggerty, Jeannie; Hogg, William; Wodchis, Walter P; McGrail, Kimberlyn

2016-11-01

Primary care services form the foundation of modern healthcare systems, yet the breadth and complexity of services and diversity of patient populations may present challenges for creating comprehensive primary care information systems. Our objective is to develop regional-level information on the performance of primary care in Canada. A scoping review was conducted to identify existing initiatives in primary care performance measurement and reporting across 11 countries. The results of this review were used by our international team of primary care researchers and clinicians to propose an approach for regional-level primary care reporting. We found a gap between conceptual primary care performance measurement frameworks in the peer-reviewed literature and real-world primary care performance measurement and reporting activities. We did not find a conceptual framework or analytic approach that could readily form the foundation of a regional-level primary care information system. Therefore, we propose an approach to reporting comprehensive and actionable performance information according to widely accepted core domains of primary care as well as different patient population groups. An approach that bridges the gap between conceptual frameworks and real-world performance measurement and reporting initiatives could address some of the potential pitfalls of existing ways of presenting performance information (i.e., by single diseases or by age). This approach could produce meaningful and actionable information on the quality of primary care services. Copyright © 2016 Longwoods Publishing.

Primary Care Performance Measurement and Reporting at a Regional Level: Could a Matrix Approach Provide Actionable Information for Policy Makers and Clinicians?

PubMed Central

Langton, Julia M.; Wong, Sabrina T.; Johnston, Sharon; Abelson, Julia; Ammi, Mehdi; Burge, Fred; Campbell, John; Haggerty, Jeannie; Hogg, William; Wodchis, Walter P.

2016-01-01

Objective: Primary care services form the foundation of modern healthcare systems, yet the breadth and complexity of services and diversity of patient populations may present challenges for creating comprehensive primary care information systems. Our objective is to develop regional-level information on the performance of primary care in Canada. Methods: A scoping review was conducted to identify existing initiatives in primary care performance measurement and reporting across 11 countries. The results of this review were used by our international team of primary care researchers and clinicians to propose an approach for regional-level primary care reporting. Results: We found a gap between conceptual primary care performance measurement frameworks in the peer-reviewed literature and real-world primary care performance measurement and reporting activities. We did not find a conceptual framework or analytic approach that could readily form the foundation of a regional-level primary care information system. Therefore, we propose an approach to reporting comprehensive and actionable performance information according to widely accepted core domains of primary care as well as different patient population groups. Conclusions: An approach that bridges the gap between conceptual frameworks and real-world performance measurement and reporting initiatives could address some of the potential pitfalls of existing ways of presenting performance information (i.e., by single diseases or by age). This approach could produce meaningful and actionable information on the quality of primary care services. PMID:28032823

The measurement of the earth's radiation budget as a problem in information theory - A tool for the rational design of earth observing systems

NASA Technical Reports Server (NTRS)

Barkstrom, B. R.

1983-01-01

The measurement of the earth's radiation budget has been chosen to illustrate the technique of objective system design. The measurement process is an approximately linear transformation of the original field of radiant exitances, so that linear statistical techniques may be employed. The combination of variability, measurement strategy, and error propagation is presently made with the help of information theory, as suggested by Kondratyev et al. (1975) and Peckham (1974). Covariance matrices furnish the quantitative statement of field variability.

The guidance methodology of a new automatic guided laser theodolite system

NASA Astrophysics Data System (ADS)

Zhang, Zili; Zhu, Jigui; Zhou, Hu; Ye, Shenghua

2008-12-01

Spatial coordinate measurement systems such as theodolites, laser trackers and total stations have wide application in manufacturing and certification processes. The traditional operation of theodolites is manual and time-consuming which does not meet the need of online industrial measurement, also laser trackers and total stations need reflective targets which can not realize noncontact and automatic measurement. A new automatic guided laser theodolite system is presented to achieve automatic and noncontact measurement with high precision and efficiency which is comprised of two sub-systems: the basic measurement system and the control and guidance system. The former system is formed by two laser motorized theodolites to accomplish the fundamental measurement tasks while the latter one consists of a camera and vision system unit mounted on a mechanical displacement unit to provide azimuth information of the measured points. The mechanical displacement unit can rotate horizontally and vertically to direct the camera to the desired orientation so that the camera can scan every measured point in the measuring field, then the azimuth of the corresponding point is calculated for the laser motorized theodolites to move accordingly to aim at it. In this paper the whole system composition and measuring principle are analyzed, and then the emphasis is laid on the guidance methodology for the laser points from the theodolites to move towards the measured points. The guidance process is implemented based on the coordinate transformation between the basic measurement system and the control and guidance system. With the view field angle of the vision system unit and the world coordinate of the control and guidance system through coordinate transformation, the azimuth information of the measurement area that the camera points at can be attained. The momentary horizontal and vertical changes of the mechanical displacement movement are also considered and calculated to provide real time azimuth information of the pointed measurement area by which the motorized theodolite will move accordingly. This methodology realizes the predetermined location of the laser points which is within the camera-pointed scope so that it accelerates the measuring process and implements the approximate guidance instead of manual operations. The simulation results show that the proposed method of automatic guidance is effective and feasible which provides good tracking performance of the predetermined location of laser points.

Fisher information at the edge of chaos in random Boolean networks.

PubMed

Wang, X Rosalind; Lizier, Joseph T; Prokopenko, Mikhail

2011-01-01

We study the order-chaos phase transition in random Boolean networks (RBNs), which have been used as models of gene regulatory networks. In particular we seek to characterize the phase diagram in information-theoretic terms, focusing on the effect of the control parameters (activity level and connectivity). Fisher information, which measures how much system dynamics can reveal about the control parameters, offers a natural interpretation of the phase diagram in RBNs. We report that this measure is maximized near the order-chaos phase transitions in RBNs, since this is the region where the system is most sensitive to its parameters. Furthermore, we use this study of RBNs to clarify the relationship between Shannon and Fisher information measures.

Information technology as a tool to improve the quality of American Indian health care.

PubMed

Sequist, Thomas D; Cullen, Theresa; Ayanian, John Z

2005-12-01

The American Indian/Alaska Native population experiences a disproportionate burden of disease across a spectrum of conditions. While the recent National Healthcare Disparities Report highlighted differences in quality of care among racial and ethnic groups, there was only very limited information available for American Indians. The Indian Health Service (IHS) is currently enhancing its information systems to improve the measurement of health care quality as well as to support quality improvement initiatives. We summarize current knowledge regarding health care quality for American Indians, highlighting the variation in reported measures in the existing literature. We then discuss how the IHS is using information systems to produce standardized performance measures and present future directions for improving American Indian health care quality.

A plastic scintillator-based muon tomography system with an integrated muon spectrometer

NASA Astrophysics Data System (ADS)

Anghel, V.; Armitage, J.; Baig, F.; Boniface, K.; Boudjemline, K.; Bueno, J.; Charles, E.; Drouin, P.-L.; Erlandson, A.; Gallant, G.; Gazit, R.; Godin, D.; Golovko, V. V.; Howard, C.; Hydomako, R.; Jewett, C.; Jonkmans, G.; Liu, Z.; Robichaud, A.; Stocki, T. J.; Thompson, M.; Waller, D.

2015-10-01

A muon scattering tomography system which uses extruded plastic scintillator bars for muon tracking and a dedicated muon spectrometer that measures scattering through steel slabs has been constructed and successfully tested. The atmospheric muon detection efficiency is measured to be 97% per plane on average and the average intrinsic hit resolution is 2.5 mm. In addition to creating a variety of three-dimensional images of objects of interest, a quantitative study has been carried out to investigate the impact of including muon momentum measurements when attempting to detect high-density, high-Z material. As expected, the addition of momentum information improves the performance of the system. For a fixed data-taking time of 60 s and a fixed false positive fraction, the probability to detect a target increases when momentum information is used. This is the first demonstration of the use of muon momentum information from dedicated spectrometer measurements in muon scattering tomography.

Progress report on understanding AFIS seed coat nep levels in pre-opened slivers on the Advanced Fiber Information System (AFIS)

USDA-ARS?s Scientific Manuscript database

The Advanced Fiber Information System (AFIS) is utilized in this segment of the research project to study how seed coat neps are measured. A patent search was conducted, and studied to assist with the understanding of the AFIS measurement of this impurity in raw cotton. The older AFIS 2 is primari...

Modeling reliability measurement of interface on information system: Towards the forensic of rules

NASA Astrophysics Data System (ADS)

Nasution, M. K. M.; Sitompul, Darwin; Harahap, Marwan

2018-02-01

Today almost all machines depend on the software. As a software and hardware system depends also on the rules that are the procedures for its use. If the procedure or program can be reliably characterized by involving the concept of graph, logic, and probability, then regulatory strength can also be measured accordingly. Therefore, this paper initiates an enumeration model to measure the reliability of interfaces based on the case of information systems supported by the rules of use by the relevant agencies. An enumeration model is obtained based on software reliability calculation.

Deterministic quantum teleportation with atoms.

PubMed

Riebe, M; Häffner, H; Roos, C F; Hänsel, W; Benhelm, J; Lancaster, G P T; Körber, T W; Becher, C; Schmidt-Kaler, F; James, D F V; Blatt, R

2004-06-17

Teleportation of a quantum state encompasses the complete transfer of information from one particle to another. The complete specification of the quantum state of a system generally requires an infinite amount of information, even for simple two-level systems (qubits). Moreover, the principles of quantum mechanics dictate that any measurement on a system immediately alters its state, while yielding at most one bit of information. The transfer of a state from one system to another (by performing measurements on the first and operations on the second) might therefore appear impossible. However, it has been shown that the entangling properties of quantum mechanics, in combination with classical communication, allow quantum-state teleportation to be performed. Teleportation using pairs of entangled photons has been demonstrated, but such techniques are probabilistic, requiring post-selection of measured photons. Here, we report deterministic quantum-state teleportation between a pair of trapped calcium ions. Following closely the original proposal, we create a highly entangled pair of ions and perform a complete Bell-state measurement involving one ion from this pair and a third source ion. State reconstruction conditioned on this measurement is then performed on the other half of the entangled pair. The measured fidelity is 75%, demonstrating unequivocally the quantum nature of the process.

Measuring healthcare productivity - from unit to system level.

PubMed

Kämäräinen, Vesa Johannes; Peltokorpi, Antti; Torkki, Paulus; Tallbacka, Kaj

2016-04-18

Purpose - Healthcare productivity is a growing issue in most Western countries where healthcare expenditure is rapidly increasing. Therefore, accurate productivity metrics are essential to avoid sub-optimization within a healthcare system. The purpose of this paper is to focus on healthcare production system productivity measurement. Design/methodology/approach - Traditionally, healthcare productivity has been studied and measured independently at the unit, organization and system level. Suggesting that productivity measurement should be done in different levels, while simultaneously linking productivity measurement to incentives, this study presents the challenges of productivity measurement at the different levels. The study introduces different methods to measure productivity in healthcare. In addition, it provides background information on the methods used to measure productivity and the parameters used in these methods. A pilot investigation of productivity measurement is used to illustrate the challenges of measurement, to test the developed measures and to prove the practical information for managers. Findings - The study introduces different approaches and methods to measure productivity in healthcare. Practical implications - A pilot investigation of productivity measurement is used to illustrate the challenges of measurement, to test the developed measures and to prove the practical benefits for managers. Originality/value - The authors focus on the measurement of the whole healthcare production system and try to avoid sub-optimization. Additionally considering an individual patient approach, productivity measurement is examined at the unit level, the organizational level and the system level.

The Air Program Information Management System (APIMS)

DTIC Science & Technology

2011-11-02

Technology November 2, 2011 The Air Program Information Management System (APIMS) Frank Castaneda, III, P.E. APIMS Program Manager AFCEE/TDNQ APIMS...NOV 2011 2. REPORT TYPE 3. DATES COVERED 00-00-2011 to 00-00-2011 4. TITLE AND SUBTITLE The Air Program Information Management System (APIMS... Information   Management   System : Sustainability of  Enterprise air quality management system • Aspects and Impacts to Process • Auditing and Measurement

Proof of concept demonstration for coherent beam pattern measurements of KID detectors

NASA Astrophysics Data System (ADS)

Davis, Kristina K.; Baryshev, Andrey M.; Jellema, Willem; Yates, Stephen J. C.; Ferrari, Lorenza; Baselmans, Jochem J. A.

2016-07-01

Here we summarize the initial results from a complex field radiation pattern measurement of a kinetic inductance detector instrument. These detectors are phase insensitive and have thus been limited to scalar, or amplitude-only, beam measurements. Vector beam scans, of both amplitude and phase, double the information received in comparison to scalar beam scans. Scalar beam measurements require multiple scans at varying distances along the optical path of the receiver to fully constrain the divergence angle of the optical system and locate the primary focus. Vector scans provide this information with a single scan, reducing the total measurement time required for new systems and also limiting the influence of system instabilities. The vector scan can be taken at any point along the optical axis of the system including the near-field, which makes beam measurements possible for large systems at high frequencies where these measurements may be inconceivable to be tested in-situ. Therefore, the methodology presented here should enable common heterodyne analysis for direct detector instruments. In principle, this coherent measurement strategy allows phase dependent analysis to be performed on any direct-detect receiver instrument.

Extracting laboratory test information from biomedical text

PubMed Central

Kang, Yanna Shen; Kayaalp, Mehmet

2013-01-01

Background: No previous study reported the efficacy of current natural language processing (NLP) methods for extracting laboratory test information from narrative documents. This study investigates the pathology informatics question of how accurately such information can be extracted from text with the current tools and techniques, especially machine learning and symbolic NLP methods. The study data came from a text corpus maintained by the U.S. Food and Drug Administration, containing a rich set of information on laboratory tests and test devices. Methods: The authors developed a symbolic information extraction (SIE) system to extract device and test specific information about four types of laboratory test entities: Specimens, analytes, units of measures and detection limits. They compared the performance of SIE and three prominent machine learning based NLP systems, LingPipe, GATE and BANNER, each implementing a distinct supervised machine learning method, hidden Markov models, support vector machines and conditional random fields, respectively. Results: Machine learning systems recognized laboratory test entities with moderately high recall, but low precision rates. Their recall rates were relatively higher when the number of distinct entity values (e.g., the spectrum of specimens) was very limited or when lexical morphology of the entity was distinctive (as in units of measures), yet SIE outperformed them with statistically significant margins on extracting specimen, analyte and detection limit information in both precision and F-measure. Its high recall performance was statistically significant on analyte information extraction. Conclusions: Despite its shortcomings against machine learning methods, a well-tailored symbolic system may better discern relevancy among a pile of information of the same type and may outperform a machine learning system by tapping into lexically non-local contextual information such as the document structure. PMID:24083058

Research on distributed optical fiber sensing data processing method based on LabVIEW

NASA Astrophysics Data System (ADS)

Li, Zhonghu; Yang, Meifang; Wang, Luling; Wang, Jinming; Yan, Junhong; Zuo, Jing

2018-01-01

The pipeline leak detection and leak location problem have gotten extensive attention in the industry. In this paper, the distributed optical fiber sensing system is designed based on the heat supply pipeline. The data processing method of distributed optical fiber sensing based on LabVIEW is studied emphatically. The hardware system includes laser, sensing optical fiber, wavelength division multiplexer, photoelectric detector, data acquisition card and computer etc. The software system is developed using LabVIEW. The software system adopts wavelet denoising method to deal with the temperature information, which improved the SNR. By extracting the characteristic value of the fiber temperature information, the system can realize the functions of temperature measurement, leak location and measurement signal storage and inquiry etc. Compared with traditional negative pressure wave method or acoustic signal method, the distributed optical fiber temperature measuring system can measure several temperatures in one measurement and locate the leak point accurately. It has a broad application prospect.

77 FR 27540 - Information Collection Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-10

... information or copies of the information collection(s) send your request to accounting[email protected]; and converting the data from the carrier's individual accounting system to the Board's Uniform System... (URCS), which is a cost measurement methodology. URCS, which was developed by the Board pursuant to 49 U...

Measuring information processing in a client with extreme agitation following traumatic brain injury using the Perceive, Recall, Plan and Perform System of Task Analysis.

PubMed

Nott, Melissa T; Chapparo, Christine

2008-09-01

Agitation following traumatic brain injury is characterised by a heightened state of activity with disorganised information processing that interferes with learning and achieving functional goals. This study aimed to identify information processing problems during task performance of a severely agitated adult using the Perceive, Recall, Plan and Perform (PRPP) System of Task Analysis. Second, this study aimed to examine the sensitivity of the PRPP System to changes in task performance over a short period of rehabilitation, and third, to evaluate the guidance provided by the PRPP in directing intervention. A case study research design was employed. The PRPP System of Task Analysis was used to assess changes in task embedded information processing capacity during occupational therapy intervention with a severely agitated adult in a rehabilitation context. Performance is assessed on three selected tasks over a one-month period. Information processing difficulties during task performance can be clearly identified when observing a severely agitated adult following a traumatic brain injury. Processing skills involving attention, sensory processing and planning were most affected at this stage of rehabilitation. These processing difficulties are linked to established descriptions of agitated behaviour. Fluctuations in performance across three tasks of differing processing complexity were evident, leading to hypothesised relationships between task complexity, environment and novelty with information processing errors. Changes in specific information processing capacity over time were evident based on repeated measures using the PRPP System of Task Analysis. This lends preliminary support for its utility as an outcome measure, and raises hypotheses about the type of therapy required to enhance information processing in people with severe agitation. The PRPP System is sensitive to information processing changes in severely agitated adults when used to reassess performance over short intervals and can provide direct guidance to occupational therapy intervention to improve task embedded information processing by categorising errors under four stages of an information processing model: Perceive, Recall, Plan and Perform.

Additional Support for the Information Systems Analyst Exam as a Valid Program Assessment Tool

ERIC Educational Resources Information Center

Carpenter, Donald A.; Snyder, Johnny; Slauson, Gayla Jo; Bridge, Morgan K.

2011-01-01

This paper presents a statistical analysis to support the notion that the Information Systems Analyst (ISA) exam can be used as a program assessment tool in addition to measuring student performance. It compares ISA exam scores earned by students in one particular Computer Information Systems program with scores earned by the same students on the…

Information system technologies' role in augmenting dermatologists' knowledge of prescription medication costs.

PubMed

DeMarco, Sebastian S; Paul, Ravi; Kilpatrick, Russell J

2015-12-01

Despite the recent rising costs of once affordable dermatologic prescription medications, a survey measuring dermatologists' attitudes, beliefs, and knowledge of the cost of drugs they commonly prescribe has not been conducted. Awareness of drug costs is hindered by a lack of access to data about the prices of medicines. No surveys of physicians have addressed this issue by proposing new information system technologies that augment prescription medication price transparency and measuring how receptive physicians are to using these novel solutions in their daily clinical practice. Our research aims to investigate these topics with a survey of physicians in dermatology. Members of the North Carolina Dermatology Association were contacted through their electronic mailing list and asked to take an online survey. The survey asked several questions about dermatologists' attitudes and beliefs about drug costs. To measure their knowledge of prescription medications, the National Average Drug Acquisition Cost was used as an authoritative price that was compared to the survey takers' price estimates of drugs commonly used in dermatology. Physicians' willingness to use four distinct information system technologies that increase drug price transparency was also assessed. Dermatologists believe drug costs are an important factor in patient care and believe access to price information would allow them to provide a higher quality of care. Dermatologists' knowledge of the costs of medicines they commonly prescribe is poor, but they want to utilize information system technologies that increase access to drug pricing information. There is an unmet demand for information system technologies which increase price transparency of medications in dermatology. Physicians and IT professionals have the opportunity to create novel information systems that can be utilized to help guide cost conscious clinical decision making. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Outcomes measurement in hospitals: can the system change the organization?

PubMed

Linder, J C

1992-01-01

The U.S. health care industry is in crisis--a crisis of accountability. Many believe that improved information, especially outcomes information, is at least part of the solution. If this assessment is accurate, outcomes measurement could offer a powerful opportunity to help mold our dysfunctional health care machinery into an effective infrastructure. This article explores whether implementing an outcomes measurement system in a hospital compels this kind of change. It examines the experiences of 31 hospitals that implemented a market-leading outcomes measurement system. Despite its potential, MedisGroups did not compel important improvements in hospitals' quality of care or their internal practices. Hospitals found it particularly difficult to maintain momentum throughout implementation and to structure the system as a supporting tool, rather than a driving influence, in their pursuit of operating improvements.

Development of Performance Dashboards in Healthcare Sector: Key Practical Issues

PubMed Central

Ghazisaeidi, Marjan; Safdari, Reza; Torabi, Mashallah; Mirzaee, Mahboobeh; Farzi, Jebraeil; Goodini, Azadeh

2015-01-01

Background: Static nature of performance reporting systems in health care sector has resulted in inconsistent, incomparable, time consuming, and static performance reports that are not able to transparently reflect a round picture of performance and effectively support healthcare managers’ decision makings. So, the healthcare sector needs interactive performance management tools such as performance dashboards to measure, monitor, and manage performance more effectively. The aim of this article was to identify key issues that need to be addressed for developing high-quality performance dashboards in healthcare sector. Methods: A literature review was established to search electronic research databases, e-journals collections, and printed journals, books, dissertations, and theses for relevant articles. The search strategy interchangeably used the terms of “dashboard”, “performance measurement system”, and “executive information system” with the term of “design” combined with operator “AND”. Search results (n=250) were adjusted for duplications, screened based on their abstract relevancy and full-text availability (n=147) and then assessed for eligibility (n=40). Eligible articles were included if they had explicitly focused on dashboards, performance measurement systems or executive information systems design. Finally, 28 relevant articles included in the study. Results: Creating high-quality performance dashboards requires addressing both performance measurement and executive information systems design issues. Covering these two fields, identified contents were categorized to four main domains: KPIs development, Data Sources and data generation, Integration of dashboards to source systems, and Information presentation issues. Conclusion: This study implies the main steps to develop dashboards for the purpose of performance management. Performance dashboards developed on performance measurement and executive information systems principles and supported by proper back-end infrastructure will result in creation of dynamic reports that help healthcare managers to consistently measure the performance, continuously detect outliers, deeply analyze causes of poor performance, and effectively plan for the future. PMID:26635442

The Basic Principles and Methods of the System Approach to Compression of Telemetry Data

NASA Astrophysics Data System (ADS)

Levenets, A. V.

2018-01-01

The task of data compressing of measurement data is still urgent for information-measurement systems. In paper the basic principles necessary for designing of highly effective systems of compression of telemetric information are offered. A basis of the offered principles is representation of a telemetric frame as whole information space where we can find of existing correlation. The methods of data transformation and compressing algorithms realizing the offered principles are described. The compression ratio for offered compression algorithm is about 1.8 times higher, than for a classic algorithm. Thus, results of a research of methods and algorithms showing their good perspectives.

Spectral Resolution and Coverage Impact on Advanced Sounder Information Content

NASA Technical Reports Server (NTRS)

Larar, Allen M.; Liu, Xu; Zhou, Daniel K.; Smith, William L.

2010-01-01

Advanced satellite sensors are tasked with improving global measurements of the Earth s atmosphere, clouds, and surface to enable enhancements in weather prediction, climate monitoring capability, and environmental change detection. Achieving such measurement improvements requires instrument system advancements. This presentation focuses on the impact of spectral resolution and coverage changes on remote sensing system information content, with a specific emphasis on thermodynamic state and trace species variables obtainable from advanced atmospheric sounders such as the Infrared Atmospheric Sounding Interferometer (IASI) and Cross-track Infrared Sounder (CrIS) systems on the MetOp and NPP/NPOESS series of satellites. Key words: remote sensing, advanced sounders, information content, IASI, CrIS

Resolution of Probabilistic Weather Forecasts with Application in Disease Management.

PubMed

Hughes, G; McRoberts, N; Burnett, F J

2017-02-01

Predictive systems in disease management often incorporate weather data among the disease risk factors, and sometimes this comes in the form of forecast weather data rather than observed weather data. In such cases, it is useful to have an evaluation of the operational weather forecast, in addition to the evaluation of the disease forecasts provided by the predictive system. Typically, weather forecasts and disease forecasts are evaluated using different methodologies. However, the information theoretic quantity expected mutual information provides a basis for evaluating both kinds of forecast. Expected mutual information is an appropriate metric for the average performance of a predictive system over a set of forecasts. Both relative entropy (a divergence, measuring information gain) and specific information (an entropy difference, measuring change in uncertainty) provide a basis for the assessment of individual forecasts.

75 FR 37815 - Agency Information Collection Activities: Two-Year Extension of an Existing Information...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-30

... measures, collects data on overall project performance related to the Bureau's strategic goals, objectives, outcomes, and indicators. Progress will be measured based on the objectives of the grant project, and... health professions and nursing education and training programs. The reporting system measures the grantee...

Transforming Performance Measurement for the 21st Century

ERIC Educational Resources Information Center

Hatry, Harry P.

2014-01-01

While substantial progress has been made in spreading performance measurement across the country and world, much of the information from performance measurement systems has been shallow. Modern technology and the considerable demand for information on progress in achieving the outcomes of public programs and policies are creating major…

A Measure of Systems Engineering Effectiveness in Government Acquisition of Complex Information Systems: A Bayesian Belief Network-Based Approach

ERIC Educational Resources Information Center

Doskey, Steven Craig

2014-01-01

This research presents an innovative means of gauging Systems Engineering effectiveness through a Systems Engineering Relative Effectiveness Index (SE REI) model. The SE REI model uses a Bayesian Belief Network to map causal relationships in government acquisitions of Complex Information Systems (CIS), enabling practitioners to identify and…

78 FR 66420 - Proposed Enhancements to the Motor Carrier Safety Measurement System (SMS) Public Web Site

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-05

...-0392] Proposed Enhancements to the Motor Carrier Safety Measurement System (SMS) Public Web Site AGENCY... on the Agency's Safety Measurement System (SMS) public Web site. FMCSA first announced the... public Web site that are the direct result of feedback from stakeholders regarding the information...

40 CFR 1065.308 - Continuous gas analyzer system-response and updating-recording verification-for gas analyzers not...

Code of Federal Regulations, 2010 CFR

2010-07-01

... which you sample and record gas-analyzer concentrations. (b) Measurement principles. This test verifies... appropriate frequency to prevent loss of information. This test also verifies that the measurement system... instructions. Adjust the measurement system as needed to optimize performance. Run this verification with the...

Computerized management information systems and organizational structures

NASA Technical Reports Server (NTRS)

Zannetos, Z. S.; Sertel, M. R.

1970-01-01

The computerized management of information systems and organizational structures is discussed. The subjects presented are: (1) critical factors favoring centralization and decentralization of organizations, (2) classification of organizations by relative structure, (3) attempts to measure change in organization structure, and (4) impact of information technology developments on organizational structure changes.

What should we measure? Conceptualizing usage in health information exchange

PubMed Central

Jasperson, Jon

2010-01-01

Under the provisions of the Health Information Technology for Economic & Clinical Health act providers need to demonstrate their ‘meaningful use’ of electronic health record systems' health information exchange (HIE) capability. HIE usage is not a simple construct, but the choice of its measurement must attend to the users, context, and objectives of the system being examined. This review examined how usage is reported in the existing literature and also what conceptualizations of usage might best reflect the nature and objectives of HIE. While existing literature on HIE usage included a diverse set of measures, most were theoretically weak, did not attend to the interplay of measure, level of analysis and architectural strategy, and did not reflect how HIE usage affected the actual process of care. Attention to these issues will provide greater insight into the effects of previously inaccessible information on medical decision-making and the process of care. PMID:20442148

Synchrophasor-Assisted Prediction of Stability/Instability of a Power System

NASA Astrophysics Data System (ADS)

Saha Roy, Biman Kumar; Sinha, Avinash Kumar; Pradhan, Ashok Kumar

2013-05-01

This paper presents a technique for real-time prediction of stability/instability of a power system based on synchrophasor measurements obtained from phasor measurement units (PMUs) at generator buses. For stability assessment the technique makes use of system severity indices developed using bus voltage magnitude obtained from PMUs and generator electrical power. Generator power is computed using system information and PMU information like voltage and current phasors obtained from PMU. System stability/instability is predicted when the indices exceeds a threshold value. A case study is carried out on New England 10-generator, 39-bus system to validate the performance of the technique.

Measuring entanglement entropy in a quantum many-body system.

PubMed

Islam, Rajibul; Ma, Ruichao; Preiss, Philipp M; Tai, M Eric; Lukin, Alexander; Rispoli, Matthew; Greiner, Markus

2015-12-03

Entanglement is one of the most intriguing features of quantum mechanics. It describes non-local correlations between quantum objects, and is at the heart of quantum information sciences. Entanglement is now being studied in diverse fields ranging from condensed matter to quantum gravity. However, measuring entanglement remains a challenge. This is especially so in systems of interacting delocalized particles, for which a direct experimental measurement of spatial entanglement has been elusive. Here, we measure entanglement in such a system of itinerant particles using quantum interference of many-body twins. Making use of our single-site-resolved control of ultracold bosonic atoms in optical lattices, we prepare two identical copies of a many-body state and interfere them. This enables us to directly measure quantum purity, Rényi entanglement entropy, and mutual information. These experiments pave the way for using entanglement to characterize quantum phases and dynamics of strongly correlated many-body systems.

Combination of optical shape measurement and augmented reality for task support: II. Real-time feedback of shape measurement results

NASA Astrophysics Data System (ADS)

Yamauchi, Makoto; Iwamoto, Kazuyo

2010-05-01

Line heating is a skilled task in shipbuilding to shape the outer plates of ship hulls. Real-time information on the deformation of the plates during the task would be helpful to workers performing this process. Therefore, we herein propose an interactive scheme for supporting workers performing line heating; the system provides such information through an optical shape measurement instrument combined with an augmented reality (AR) system. The instrument was designed and fabricated so that the measured data were represented using coordinates based on fiducial markers. Since the markers were simultaneously used in the AR system for the purpose of positioning, the data could then be displayed to the workers through a head-mounted display as a virtual image overlaid on the plates. Feedback of the shape measurement results was thus performed in real time using the proposed system.

Macroinformational analysis of conditions for controllability of space-vehicle orbit

NASA Astrophysics Data System (ADS)

Glazov, B. I.

2011-12-01

The general axiomatics of information measures for the macro analysis of relations of an information-cybernetic system in the control is introduced. The general structure of a semantically marked graph of open and closed relations of an information-cybernetic system between the participants in the environment, as well as thenecessary axiomatic and technological information-cybernetic system conditions of controllability and observability of objects, for the case of a space vehicle in orbit, are justified.

Information systems as a tool to improve legal metrology activities

NASA Astrophysics Data System (ADS)

Rodrigues Filho, B. A.; Soratto, A. N. R.; Gonçalves, R. F.

2016-07-01

This study explores the importance of information systems applied to legal metrology as a tool to improve the control of measuring instruments used in trade. The information system implanted in Brazil has also helped to understand and appraise the control of the measurements due to the behavior of the errors and deviations of instruments used in trade, allowing the allocation of resources wisely, leading to a more effective planning and control on the legal metrology field. A study case analyzing the fuel sector is carried out in order to show the conformity of fuel dispersers according to maximum permissible errors. The statistics of measurement errors of 167,310 fuel dispensers of gasoline, ethanol and diesel used in the field were analyzed demonstrating the accordance of the fuel market in Brazil to the legal requirements.

A Study on Secure Medical-Contents Strategies with DRM Based on Cloud Computing

PubMed Central

Měsíček, Libor; Choi, Jongsun

2018-01-01

Many hospitals and medical clinics have been using a wearable sensor in its health care system because the wearable sensor, which is able to measure the patients' biometric information, has been developed to analyze their patients remotely. The measured information is saved to a server in a medical center, and the server keeps the medical information, which also involves personal information, on a cloud system. The server and network devices are used by connecting each other, and sensitive medical records are dealt with remotely. However, these days, the attackers, who try to attack the server or the network systems, are increasing. In addition, the server and the network system have a weak protection and security policy against the attackers. In this paper, it is suggested that security compliance of medical contents should be followed to improve the level of security. As a result, the medical contents are kept safely. PMID:29796233

A Study on Secure Medical-Contents Strategies with DRM Based on Cloud Computing.

PubMed

Ko, Hoon; Měsíček, Libor; Choi, Jongsun; Hwang, Seogchan

2018-01-01

Many hospitals and medical clinics have been using a wearable sensor in its health care system because the wearable sensor, which is able to measure the patients' biometric information, has been developed to analyze their patients remotely. The measured information is saved to a server in a medical center, and the server keeps the medical information, which also involves personal information, on a cloud system. The server and network devices are used by connecting each other, and sensitive medical records are dealt with remotely. However, these days, the attackers, who try to attack the server or the network systems, are increasing. In addition, the server and the network system have a weak protection and security policy against the attackers. In this paper, it is suggested that security compliance of medical contents should be followed to improve the level of security. As a result, the medical contents are kept safely.

Design of electrocardiography measurement system with an algorithm to remove noise

NASA Astrophysics Data System (ADS)

Kwon, Hyeokjun; Oh, Sechang; Kumar, Prashanth; Varadan, Vijay K.

2011-04-01

Electrocardiography (ECG) is an important diagnostic tool that can provide vital information about diseases that may not be detectable with other biological signals like, SpO2(Oxygen Saturation), pulse rate, respiration, and blood pressure. For this reason, EKG measurement is mandatory for accurate diagnosis. Recent development in information technology has facilitated remote monitoring systems which can check patient's current status. Moreover, remote monitoring systems can obviate the need for patients to go to hospitals periodically. Such representative wireless communication system is Zigbee sensor network because Zigbee sensor network provides low power consumption and multi-device connection. When we measure EKG signal, another important factor that we should consider is about unexpected signals mixed to EKG signal. The unexpected signals give a severe impact in distorting original EKG signal. There are three kinds of types in noise elements such as muscle noise, movement noise, and respiration noise. This paper describes the design method for EKG measurement system with Zigbee sensor network and proposes an algorithm to remove noises from measured ECG signal.

Establishing System Measures of Effectiveness

DTIC Science & Technology

2001-03-01

Halpin, 1991] Andriole, Stephen J. and Stanley M. Halpin, editors. Information Technology for Command and Control: Methods and Tools for Systems...Systems with Models and Objects, New York: Mc Graw -Hill, 1997. [Pawlowski, 1993a] Pawlowski, Thomas J. III, LTC. C3IEW Measures of Effectiveness

MAP Fault Localization Based on Wide Area Synchronous Phasor Measurement Information

NASA Astrophysics Data System (ADS)

Zhang, Yagang; Wang, Zengping

2015-02-01

In the research of complicated electrical engineering, the emergence of phasor measurement units (PMU) is a landmark event. The establishment and application of wide area measurement system (WAMS) in power system has made widespread and profound influence on the safe and stable operation of complicated power system. In this paper, taking full advantage of wide area synchronous phasor measurement information provided by PMUs, we have carried out precise fault localization based on the principles of maximum posteriori probability (MAP). Large numbers of simulation experiments have confirmed that the results of MAP fault localization are accurate and reliable. Even if there are interferences from white Gaussian stochastic noise, the results from MAP classification are also identical to the actual real situation.

Online devices and measuring systems for the automatic control of newspaper printing

NASA Astrophysics Data System (ADS)

Marszalec, Elzbieta A.; Heikkila, Ismo; Juhola, Helene; Lehtonen, Tapio

1999-09-01

The paper reviews the state-of-the-art color measuring systems used for the control of newspaper printing. The printing process requirements are specified and different off-line and on-line color quality control systems, commercially available and under development, are evaluated. Recent market trends in newspaper printing are discussed based on the survey. The study was made on information derived from: conference proceedings (TAGA, IARIGAI, SPIE and IS&T), journals (American Printer, Applied Optics), discussions with experts (GMI, QTI, HONEYWELL, TOBIAS, GretagMacbeth), IFRA Expo'98/Quality Measuring Technologies, commercial brochures, and the Internet. On the background of this review, three different measuring principles, currently, under investigation at VTT Information Technology, are described and their applicability to newspaper printing is evaluated.

The integration of quantitative information with an intelligent decision support system for residential energy retrofits

NASA Astrophysics Data System (ADS)

Mo, Yunjeong

The purpose of this research is to support the development of an intelligent Decision Support System (DSS) by integrating quantitative information with expert knowledge in order to facilitate effective retrofit decision-making. To achieve this goal, the Energy Retrofit Decision Process Framework is analyzed. Expert system shell software, a retrofit measure cost database, and energy simulation software are needed for developing the DSS; Exsys Corvid, the NREM database and BEopt were chosen for implementing an integration model. This integration model demonstrates the holistic function of a residential energy retrofit system for existing homes, by providing a prioritized list of retrofit measures with cost information, energy simulation and expert advice. The users, such as homeowners and energy auditors, can acquire all of the necessary retrofit information from this unified system without having to explore several separate systems. The integration model plays the role of a prototype for the finalized intelligent decision support system. It implements all of the necessary functions for the finalized DSS, including integration of the database, energy simulation and expert knowledge.

Renyi generalizations of the conditional quantum mutual information

DTIC Science & Technology

2015-02-23

D) for a four-party pure state on systems ABCD. The conditional mutual information also underlies the squashed entanglement , an entanglement measure...that satisfies all of the axioms desired for an entanglement measure. As such, it has been an open question to find Rényi generalizations of the...possessing the C systems, and the sender and receiver sharing noiseless entanglement before communication begins, the optimal rate of quantum communication

Privacy, confidentiality, and security in information systems of state health agencies.

PubMed

O'Brien, D G; Yasnoff, W A

1999-05-01

To assess the employment and status of privacy, confidentiality, security and fair information practices in electronic information systems of U.S. state health agencies. A survey instrument was developed and administered to key contacts within the state health agencies of each of the 50 U.S. states, Puerto Rico and the District of Columbia. About a third of U.S. state health agencies have no written policies in place regarding privacy and confidentiality in electronic information systems. The doctrines of fair information practice often seemed to be ignored. One quarter of the agencies reported at least one security breach during the past two years, and 16% experienced a privacy and confidentiality related transgression. Most of the breaches were committed by personnel from within the agencies. These results raise questions about the integrity of existing privacy, confidentiality and security measures in the information systems of U.S. state health agencies. Recommendations include the development and vigorous enforcement of written privacy and confidentiality policies, increased personnel training, and expanded implementation of security measures such as encryption and system firewalls. A discussion of the current status of U.S. privacy, confidentiality and security issues is offered.

77 FR 5155 - Interest Rate Risk Policy and Program

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-02

... directors and management; appropriate IRR measurement and monitoring systems; good internal controls; and informed decision-making based on IRR measurement system results. It also provides guidelines for... technical aspects of IRR measurement methods. Of these, some said Appendix B implied a preference for the...

Cooperation, Convertibility, and Compatibility Among Information Systems: A Literature Review.

ERIC Educational Resources Information Center

Henderson, Madeline M.; And Others

The purpose of the study of the literature on which this report is based was to examine those problems in the field of documentation and in the operation of information systems which could possibly be solved or alleviated by some greater measure of cooperation, convertibility, or compatibility among systems, particularly those systems for handling…

Thermodynamic description of non-Markovian information flux of nonequilibrium open quantum systems

NASA Astrophysics Data System (ADS)

Chen, Hong-Bin; Chen, Guang-Yin; Chen, Yueh-Nan

2017-12-01

One of the fundamental issues in the field of open quantum systems is the classification and quantification of non-Markovianity. In the contest of quantity-based measures of non-Markovianity, the intuition of non-Markovianity in terms of information backflow is widely discussed. However, it is not easy to characterize the information flux for a given system state and show its connection to non-Markovianity. Here, by using the concepts from thermodynamics and information theory, we discuss a potential definition of information flux of an open quantum system, valid for static environments. We present a simple protocol to show how a system attempts to share information with its environment and how it builds up system-environment correlations. We also show that the information returned from the correlations characterizes the non-Markovianity and a hierarchy of indivisibility of the system dynamics.

RELIABILITY TESTING OF AN ON-HARVESTER COTTON WEIGHT MEASUREMENT SYSTEM

USDA-ARS?s Scientific Manuscript database

A system for weighing seed cotton onboard stripper harvesters was developed and installed on several producer owned and operated machines. The weight measurement system provides critical information to producers when in the process of calibrating yield monitors or conducting on-farm research. The ...

Service Quality: A Main Determinant Factor for Health Information System Success in Low-resource Settings.

PubMed

Tilahun, Binyam; Fritz, Fleur

2015-01-01

With the increasing implementation of different health information systems in developing countries, there is a growing need to measure the main determinants of their success. The results of this evaluation study on the determinants of HIS success in five low resource setting hospitals show that service quality is the main determinant factor for information system success in those kind of settings.

Research and development for Onboard Navigation (ONAV) ground based expert/trainer system: Preliminary ascent knowledge requirements

NASA Technical Reports Server (NTRS)

Bochsler, Daniel C.

1988-01-01

The preliminary version of expert knowledge for the Onboard Navigation (ONAV) Ground Based Expert Trainer Ascent system for the space shuttle is presented. Included is some brief background information along with the information describing the knowledge the system will contain. Information is given on rules and heuristics, telemetry status, landing sites, inertial measurement units, and a high speed trajectory determinator (HSTD) state vector.

EMR management system for patient pulse data.

PubMed

Lee, Junyoung

2012-10-01

The purpose of this study is to build an integrated medical information system for effective database management of clinical information and to improve the existing Electronic Medical Record (EMR)-based system that is currently being used in hospitals. The integrated medical information system of hospitals consists of an Order Communication System (OCS), Picture Archiving Communication System (PACS), and Laboratory Information System (LIS), as well as Electronic Medical Record (EMR). It is designed so that remote health screening and patient data search can be accessed through a high speed network-even in remote areas-in order to effectively manage data on medical treatment that patients received at their respective hospitals. The existing oriental treatment system is one in which the doctor requires the patient to visit the hospital in person, so as to be able to check the patient's pulse and measure it with his hand for proper diagnosis and treatment. However, due to the recent development of digitalized medical measurement equipment, not only can doctors now check a patient's pulse without touching it directly, but the measured data are computerized and stored into the database as the electronic obligation record. Thus, even if a patient cannot visit the hospital, proper medical treatment is available by analyzing the patient's medical history and diagnosis process in the remote area. Furthermore, when a comprehensive medical testing center system including the people medical examination and diverse physical examination is established, the quality of medical service is expected to be improved than now.

Unifying Complexity and Information

NASA Astrophysics Data System (ADS)

Ke, Da-Guan

2013-04-01

Complex systems, arising in many contexts in the computer, life, social, and physical sciences, have not shared a generally-accepted complexity measure playing a fundamental role as the Shannon entropy H in statistical mechanics. Superficially-conflicting criteria of complexity measurement, i.e. complexity-randomness (C-R) relations, have given rise to a special measure intrinsically adaptable to more than one criterion. However, deep causes of the conflict and the adaptability are not much clear. Here I trace the root of each representative or adaptable measure to its particular universal data-generating or -regenerating model (UDGM or UDRM). A representative measure for deterministic dynamical systems is found as a counterpart of the H for random process, clearly redefining the boundary of different criteria. And a specific UDRM achieving the intrinsic adaptability enables a general information measure that ultimately solves all major disputes. This work encourages a single framework coving deterministic systems, statistical mechanics and real-world living organisms.

Information-driven self-organization: the dynamical system approach to autonomous robot behavior.

PubMed

Ay, Nihat; Bernigau, Holger; Der, Ralf; Prokopenko, Mikhail

2012-09-01

In recent years, information theory has come into the focus of researchers interested in the sensorimotor dynamics of both robots and living beings. One root for these approaches is the idea that living beings are information processing systems and that the optimization of these processes should be an evolutionary advantage. Apart from these more fundamental questions, there is much interest recently in the question how a robot can be equipped with an internal drive for innovation or curiosity that may serve as a drive for an open-ended, self-determined development of the robot. The success of these approaches depends essentially on the choice of a convenient measure for the information. This article studies in some detail the use of the predictive information (PI), also called excess entropy or effective measure complexity, of the sensorimotor process. The PI of a process quantifies the total information of past experience that can be used for predicting future events. However, the application of information theoretic measures in robotics mostly is restricted to the case of a finite, discrete state-action space. This article aims at applying the PI in the dynamical systems approach to robot control. We study linear systems as a first step and derive exact results for the PI together with explicit learning rules for the parameters of the controller. Interestingly, these learning rules are of Hebbian nature and local in the sense that the synaptic update is given by the product of activities available directly at the pertinent synaptic ports. The general findings are exemplified by a number of case studies. In particular, in a two-dimensional system, designed at mimicking embodied systems with latent oscillatory locomotion patterns, it is shown that maximizing the PI means to recognize and amplify the latent modes of the robotic system. This and many other examples show that the learning rules derived from the maximum PI principle are a versatile tool for the self-organization of behavior in complex robotic systems.

Fisher information and asymptotic normality in system identification for quantum Markov chains

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guta, Madalin

2011-06-15

This paper deals with the problem of estimating the coupling constant {theta} of a mixing quantum Markov chain. For a repeated measurement on the chain's output we show that the outcomes' time average has an asymptotically normal (Gaussian) distribution, and we give the explicit expressions of its mean and variance. In particular, we obtain a simple estimator of {theta} whose classical Fisher information can be optimized over different choices of measured observables. We then show that the quantum state of the output together with the system is itself asymptotically Gaussian and compute its quantum Fisher information, which sets an absolutemore » bound to the estimation error. The classical and quantum Fisher information are compared in a simple example. In the vicinity of {theta}=0 we find that the quantum Fisher information has a quadratic rather than linear scaling in output size, and asymptotically the Fisher information is localized in the system, while the output is independent of the parameter.« less

The road surveying system of the federal highway research institute - a performance evaluation of road segmentation algorithms

NASA Astrophysics Data System (ADS)

Streiter, R.; Wanielik, G.

2013-07-01

The construction of highways and federal roadways is subject to many restrictions and designing rules. The focus is on safety, comfort and smooth driving. Unfortunately, the planning information for roadways and their real constitution, course and their number of lanes and lane widths is often unsure or not available. Due to digital map databases of roads raised much interest during the last years and became one major cornerstone of innovative Advanced Driving Assistance Systems (ADASs), the demand for accurate and detailed road information increases considerably. Within this project a measurement system for collecting high accurate road data was developed. This paper gives an overview about the sensor configuration within the measurement vehicle, introduces the implemented algorithms and shows some applications implemented in the post processing platform. The aim is to recover the origin parametric description of the roadway and the performance of the measurement system is being evaluated against several original road construction information.

Thermodynamic Modeling of Ag-Ni System Combining Experiments and Molecular Dynamic Simulation

NASA Astrophysics Data System (ADS)

Rajkumar, V. B.; Chen, Sinn-wen

2017-04-01

Ag-Ni is a simple and important system with immiscible liquids and (Ag,Ni) phases. Previously, this system has been thermodynamically modeled utilizing certain thermochemical and phase equilibria information based on conjecture. An attempt is made in this study to determine the missing information which are difficult to measure experimentally. The boundaries of the liquid miscibility gap at high temperatures are determined using a pyrometer. The temperature of the liquid ⇌ (Ag) + (Ni) eutectic reaction is measured using differential thermal analysis. Tie-lines of the Ag-Ni system at 1023 K and 1473 K are measured using a conventional metallurgical method. The enthalpy of mixing of the liquid at 1773 K and the (Ag,Ni) at 973 K is calculated by molecular dynamics simulation using a large-scale atomic/molecular massively parallel simulator. These results along with literature information are used to model the Gibbs energy of the liquid and (Ag,Ni) by a calculation of phase diagrams approach, and the Ag-Ni phase diagram is then calculated.

Development of a medical information system that minimizes staff workload and secures system safety at a small medical institution

NASA Astrophysics Data System (ADS)

Haneda, Kiyofumi; Koyama, Tadashi

2005-04-01

We developed a secure system that minimizes staff workload and secures safety of a medical information system. In this study, we assess the legal security requirements and risks occurring from the use of digitized data. We then analyze the security measures for ways of reducing these risks. In the analysis, not only safety, but also costs of security measures and ease of operability are taken into consideration. Finally, we assess the effectiveness of security measures by employing our system in small-sized medical institution. As a result of the current study, we developed and implemented several security measures, such as authentications, cryptography, data back-up, and secure sockets layer protocol (SSL) in our system. In conclusion, the cost for the introduction and maintenance of a system is one of the primary difficulties with its employment by a small-sized institution. However, with recent reductions in the price of computers, and certain advantages of small-sized medical institutions, the development of an efficient system configuration has become possible.

Validation of the National Institutes of Health Patient-Reported Outcomes Measurement Information System Survey as a Quality-of-Life Instrument for Patients with Malignant Brain Tumors and Their Caregivers.

PubMed

Romero, Melissa M; Flood, Lisa Sue; Gasiewicz, Nanci K; Rovin, Richard; Conklin, Samantha

2015-12-01

At present there is a lack of well-validated surveys used to measure quality of life in patients with malignant brain tumors and their caregivers. The main objective of this pilot study was to validate the National Institutes of Health Patient-Reported Outcomes Measurement Information System (NIH PROMIS) survey for use as a quality-of-life measure in this population. This article presents the rationale for using the NIH PROMIS instrument as a quality-of-life measure for patients with malignant brain tumors and their caregivers. Copyright © 2015 Elsevier Inc. All rights reserved.

Spatially-and Temporally-Resolved Multi-Parameter Interferometric Rayleigh Scattering System and Method

NASA Technical Reports Server (NTRS)

Bivolaru, Daniel (Inventor); Cutler, Andrew D. (Inventor); Danehy, Paul M. (Inventor)

2015-01-01

A system that simultaneously measures the translational temperature, bulk velocity, and density in gases by collecting, referencing, and analyzing nanosecond time-scale Rayleigh scattered light from molecules is described. A narrow-band pulsed laser source is used to probe two largely separated measurement locations, one of which is used for reference. The elastically scattered photons containing information from both measurement locations are collected at the same time and analyzed spectrally using a planar Fabry-Perot interferometer. A practical means of referencing the measurement of velocity using the laser frequency, and the density and temperature using the information from the reference measurement location maintained at constant properties is provided.

Assessing eGovernment Systems Success: A Validation of the DeLone and McLean Model of Information Systems Success

ERIC Educational Resources Information Center

Wang, Yi-Shun; Liao, Yi-Wen

2008-01-01

With the proliferation of the Internet and World Wide Web applications, people are increasingly interacting with government to citizen (G2C) eGovernment systems. It is therefore important to measure the success of G2C eGovernment systems from the citizen's perspective. While general information systems (IS) success models have received much…

Automated Information System for School Food Services.

ERIC Educational Resources Information Center

Hazarika, Panna; Galligan, Stephen

1982-01-01

Controlling warehousing operations and food inventory, administering school cafeteria activity, and measuring the profitability of food service operations are identified as food service administrative problems. A comprehensive school food services information system developed to address these problems is described. (Author/MLF)

Hybrid System for Ex Vivo Hemorheological and Hemodynamic Analysis: A Feasibility Study

PubMed Central

Yeom, Eunseop; Jun Kang, Yang; Joon Lee, Sang

2015-01-01

Precise measurement of biophysical properties is important to understand the relation between these properties and the outbreak of cardiovascular diseases (CVDs). However, a systematic measurement for these biophysical parameters under in vivo conditions is nearly impossible because of complex vessel shape and limited practicality. In vitro measurements can provide more biophysical information, but in vitro exposure changes hemorheological properties. In this study, a hybrid system composed of an ultrasound system and microfluidic device is proposed for monitoring hemorheological and hemodynamic properties under more reasonable experimental conditions. Biophysical properties including RBC aggregation, viscosity, velocity, and pressure of blood flows are simultaneously measured under various conditions to demonstrate the feasibility and performance of this measurement system. The proposed technique is applied to a rat extracorporeal loop which connects the aorta and jugular vein directly. As a result, the proposed system is found to measure biophysical parameters reasonably without blood collection from the rat and provided more detailed information. This hybrid system, combining ultrasound imaging and microfluidic techniques to ex vivo animal models, would be useful for monitoring the variations of biophysical properties induced by chemical agents. It can be used to understand the relation between biophysical parameters and CVDs. PMID:26090816

12 CFR Appendix E to Part 208 - Capital Adequacy Guidelines for State Member Banks; Market Risk Measure

Code of Federal Regulations, 2010 CFR

2010-01-01

... provide information about the impact of adverse market events on a bank's covered positions. Backtests provide information about the accuracy of an internal model by comparing a bank's daily VAR measures to... Banks; Market Risk Measure E Appendix E to Part 208 Banks and Banking FEDERAL RESERVE SYSTEM BOARD OF...

Measuring primary care practice performance within an integrated delivery system: a case study.

PubMed

Stewart, Louis J; Greisler, David

2002-01-01

This article examines the use of an integrated performance measurement system to plan and control primary care service delivery within an integrated delivery system. We review a growing body of literature that focuses on the development and implementation of management reporting systems among healthcare providers. Our study extends the existing literature by examining the use of performance information generated by an integrated performance measurement system within a healthcare organization. We conduct our examination through a case study of the WMG Primary Care Medicine Group, the primary care medical group practice of WellSpan Health System. WellSpan Health System is an integrated delivery system that serves south central Pennsylvania and northern Maryland. Our study examines the linkage between WellSpan Health's strategic objectives and its primary care medicine group's integrated performance measurement system. The conceptual design of this integrated performance measurement system combines financial metrics with practice management and clinical operating metrics to provide a more complete picture of medical group performance. Our findings demonstrate that WellSpan Health was able to achieve superior financial results despite a weak linkage between its integrated performance measurement system and its strategic objectives. WellSpan Health achieved this objective for its primary care medicine group by linking clinical performance information to physician compensation and reporting practice management performance through the use of statistical process charts. They found that the combined mechanisms of integrated performance measurement and statistical process control charts improved organizational learning and communications between organizational stakeholders.

Evaluating Factors of Security Policy on Information Security Effectiveness in Developing Nations: A Case of Nigeria

ERIC Educational Resources Information Center

Okolo, Nkiru Benjamin

2016-01-01

Information systems of today face more potential security infringement than ever before. The regular susceptibility of data to breaches is a function of systems users' disinclination to follow appropriate security measures. A well-secured system maintains integrity, confidentiality, and availability, while providing appropriate and consistent…

Performance measurement for information systems: Industry perspectives

NASA Technical Reports Server (NTRS)

Bishop, Peter C.; Yoes, Cissy; Hamilton, Kay

1992-01-01

Performance measurement has become a focal topic for information systems (IS) organizations. Historically, IS performance measures have dealt with the efficiency of the data processing function. Today, the function of most IS organizations goes beyond simple data processing. To understand how IS organizations have developed meaningful performance measures that reflect their objectives and activities, industry perspectives on IS performance measurement was studied. The objectives of the study were to understand the state of the practice in IS performance techniques for IS performance measurement; to gather approaches and measures of actual performance measures used in industry; and to report patterns, trends, and lessons learned about performance measurement to NASA/JSC. Examples of how some of the most forward looking companies are shaping their IS processes through measurement is provided. Thoughts on the presence of a life-cycle to performance measures development and a suggested taxonomy for performance measurements are included in the appendices.

The course correction implementation of the inertial navigation system based on the information from the aircraft satellite navigation system before take-off

NASA Astrophysics Data System (ADS)

Markelov, V.; Shukalov, A.; Zharinov, I.; Kostishin, M.; Kniga, I.

2016-04-01

The use of the correction course option before aircraft take-off after inertial navigation system (INS) inaccurate alignment based on the platform attitude-and-heading reference system in azimuth is considered in the paper. A course correction is performed based on the track angle defined by the information received from the satellite navigation system (SNS). The course correction includes a calculated track error definition during ground taxiing along straight sections before take-off with its input in the onboard digital computational system like amendment for using in the current flight. The track error calculation is performed by the statistical evaluation of the track angle comparison defined by the SNS information with the current course measured by INS for a given number of measurements on the realizable time interval. The course correction testing results and recommendation application are given in the paper. The course correction based on the information from SNS can be used for improving accuracy characteristics for determining an aircraft path after making accelerated INS preparation concerning inaccurate initial azimuth alignment.

Exploring consumer understanding and preferences for pharmacy quality information

PubMed Central

Shiyanbola, Olayinka O.; Mort, Jane R.

2014-01-01

Objective: To describe consumer understanding of pharmacy quality measures and consumer preferences for pharmacy quality information. Methods: Semi-structured focus group design was combined with survey methods. Adults who filled prescription medications for self-reported chronic illnesses at community pharmacies discussed their understanding of Pharmacy Quality Alliance approved quality measures. Questions examined preference of pharmacy quality information rating systems (e.g. stars versus percentages) and desired data display/formats. During the focus group, participants completed a survey examining their understanding of each pharmacy quality measure. All focus group discussions were transcribed verbatim. Data were analyzed using thematic analysis and descriptive statistics. Results: Thirty-four individuals participated (mean age= 62.85; SD=16.05). Participants were unfamiliar with quality measures information and their level of understanding differed for each quality measure. Surveys indicated 94.1% understood “Drug-Drug Interactions” and “Helping Patients Get Needed Medications” better than other measures (e.g., 76.5% understood “Suboptimal Treatment of Hypertension in Patients with Diabetes”). Qualitative analysis indicated participants preferred an overall pharmacy rating for quick access and use. However, participants also wanted quality measures information displayed by health conditions. Participants favored comparison of their pharmacy to city data instead of state data. Most participants liked star ratings better than percentages, letter grades, or numerical ratings. Conclusions: Individuals who have a chronic illness and regularly use community pharmacies are interested in pharmacy quality measures. However, specific quality measures were not understood by some participants. Participants had specific preferences for the display of pharmacy quality information which will be helpful in the design of appropriate quality report systems. PMID:25580169

BODY SENSING SYSTEM

NASA Technical Reports Server (NTRS)

Mah, Robert W. (Inventor)

2005-01-01

System and method for performing one or more relevant measurements at a target site in an animal body, using a probe. One or more of a group of selected internal measurements is performed at the target site, is optionally combined with one or more selected external measurements, and is optionally combined with one or more selected heuristic information items, in order to reduce to a relatively small number the probable medical conditions associated with the target site. One or more of the internal measurements is optionally used to navigate the probe to the target site. Neural net information processing is performed to provide a reduced set of probable medical conditions associated with the target site.

The Rim Inertial Measuring System (RIMS). [to measure angular rate and linear acceleration of a moving vehicle

NASA Technical Reports Server (NTRS)

Groom, N. J.

1979-01-01

The rim inertial measuring system (RIMS) is introduced and an approach for extracting angular rate and linear acceleration information from a RIMS unit is presented and discussed. The RIMS consists of one or more small annular momentum control devices (AMCDs), mounted in a strapped down configuration, which are used to measure angular rates and linear accelerations of a moving vehicle. An AMCD consists of a spinning rim, a set of noncontacting magnetic bearings for supporting the rim, and a noncontacting electromagnetic spin motor. The approach for extracting angular rate and linear acceleration information is for a single spacecraft mounted RIMS unit.

Measuring and monitoring IT using a balanced scorecard approach.

PubMed

Gash, Deborah J; Hatton, Todd

2007-01-01

Ensuring that the information technology department is aligned with the overall health system strategy and is performing at a consistently high level is a priority at Saint Luke's Health System in Kansas City, Mo. The information technology department of Saint Luke's Health System has been using the balanced scorecard approach described in this article to measure and monitor its performance for four years. This article will review the structure of the IT department's scorecard; the categories and measures used; how benchmarks are determined; how linkage to the organizational scorecard is made; how results are reported; how changes are made to the scorecard; and tips for using a scorecard in other IT departments.

A study on an information security system of a regional collaborative medical platform.

PubMed

Zhao, Junping; Peng, Kun; Leng, Jinchang; Sun, Xiaowei; Zhang, Zhenjiang; Xue, Wanguo; Ren, Lianzhong

2010-01-01

The objective of this study was to share the experience of building an information security system for a regional collaborative medical platform (RCMP) and discuss the lessons learned from practical projects. Safety measures are analyzed from the perspective of system engineering. We present the essential requirements, critical architectures, and policies for system security of regional collaborative medical platforms.

The use of a GIS-based malaria information system for malaria research and control in South Africa.

PubMed

Martin, Carrin; Curtis, Bronwyn; Fraser, Colleen; Sharp, Brian

2002-12-01

The paper aims to outline the innovative development and application of a Geographical Information System based Malaria Information System for malaria research and control in South Africa. This system is a product of collaboration between the Malaria Control Programmes and the Malaria Research Programme of the Medical Research Council of South Africa. The ability of such a system to process data timeously into a usable format is discussed, as well as its relevance to malaria research, appropriate malaria control measures, tourism, and social and economic development.

Measuring Transactiving Memory Systems Using Network Analysis

ERIC Educational Resources Information Center

King, Kylie Goodell

2017-01-01

Transactive memory systems (TMSs) describe the structures and processes that teams use to share information, work together, and accomplish shared goals. First introduced over three decades ago, TMSs have been measured in a variety of ways. This dissertation proposes the use of network analysis in measuring TMS. This is accomplished by describing…

Digital Natives and Digital Immigrants: A Study of Information Technology and Information Systems (IT/IS) Usage between Students and Faculty of Nigerian Universities

ERIC Educational Resources Information Center

Ololube, Nwachukwu Prince; Kpolovie, Peter James; Amaele, Samuel; Amanchukwu, Rose N.; Briggs, Teinye

2013-01-01

It is presumed that Nigerian students and teachers have been unable to find effective ways to use technology in the classroom and other aspects of their teaching and learning. Yet, considerable debate remains over the most efficient techniques and procedures to measure students and faculties information technology and information systems (IT/IS)…

Information Theory for Information Science: Antecedents, Philosophy, and Applications

ERIC Educational Resources Information Center

Losee, Robert M.

2017-01-01

This paper provides an historical overview of the theoretical antecedents leading to information theory, specifically those useful for understanding and teaching information science and systems. Information may be discussed in a philosophical manner and at the same time be measureable. This notion of information can thus be the subject of…

Fluctuation relations and Maxwell's demon in a circuit QED setup

NASA Astrophysics Data System (ADS)

Nakamura, Yasunobu

The recent progress in information thermodynamics has resolved the paradox of Maxwell's demon and clarified the relationship between the information and the entropy. Its extension to quantum mechanical systems has also attracted much interest, and experimental demonstrations are awaited. Circuit QED systems offer the following tools suitable for investigating the properties of a quantum system coupled with a controlled environment: (i) a well-controlled qubit with a long coherence time, (ii) dispersive readout allowing high-fidelity quantum nondemolition measurement, and (iii) fast feedback control. We first apply the so-called two-measurement protocol (TMP) to a superconducting transmon qubit in a microwave cavity and study how the decoherence affects the nonequilibrium thermodynamic relations. Next, we implement Maxwell's demon in the circuit QED system by introducing a feedback loop and confirm the fluctuation relation including the effect of the information obtained in the feedback process. These results constitute a first step towards quantum thermodynamics in circuit QED systems.

Building an Intelligent Water Information System - American River Prototype

NASA Astrophysics Data System (ADS)

Glaser, S. D.; Bales, R. C.; Conklin, M. H.

2013-12-01

With better management, California's existing water supplies could go further to meeting the needs of the state's urban and agricultural uses. For example, California's water reservoirs are currently controlled and regulated using forecasts based upon more than 75 years of historical data. In the face of global climate change, these forecasts are becoming increasingly inadequate to precisely manage water resources. We propose implementing Leveraging the newest frontiers of information technology, we are developing a basin-scale real-time intelligent water infrastructure system that enables more information-intensive decision support. The complete system is made up of four key components. First, a strategically deployed ground-observation system will complement satellite measurements and provide continuous and accurate estimates of snowpack, soil moisture, vegetation state and energy balance across watersheds. Using our recently developed but mature technologies, we deliver measurements of hydrologic variables over a multi- tiered network of wireless sensor arrays, with a granularity of time and space previously unheard of. Second, satellite and aircraft remote sensing provide the only practical means of spatially continuous basin-wide measurement and monitoring of snow properties, vegetation characteristics and other watershed conditions. The ground-based system is designed to blend with remote sensing data on Sierra Nevada snow properties, and provide value-added products of unprecedented spatial detail and accuracy that are useable on a watershed level. Third, together the satellite and ground-based data make possible the updating of forecast tools, and routine use of physically based hydrologic models. The decision-support framework will provide tools to extract and visualize information of interest from the measured and modeled data, to assess uncertainties, and to optimize operations. Fourth, the advanced cyber infrastructure blends and transforms the numbers recorded by sensors into information in the form that is useful for decision-making. In a sense it 'monetizes' the data. It is the cyber infrastructure that links measurements, data processing, models and users. System software must provide flexibility for multiple types of access from user queries to automated and direct links with analysis tools and decision-support systems. We are currently installing a basin-scale ground-based sensor network focusing on measurements of snowpack, solar radiation, temperature, rH and soil moisture across the American River basin. Although this is a research network, it also provides core elements of a full ground-based operational system.

The challenge of measuring emergency preparedness: integrating component metrics to build system-level measures for strategic national stockpile operations.

PubMed

Jackson, Brian A; Faith, Kay Sullivan

2013-02-01

Although significant progress has been made in measuring public health emergency preparedness, system-level performance measures are lacking. This report examines a potential approach to such measures for Strategic National Stockpile (SNS) operations. We adapted an engineering analytic technique used to assess the reliability of technological systems-failure mode and effects analysis-to assess preparedness. That technique, which includes systematic mapping of the response system and identification of possible breakdowns that affect performance, provides a path to use data from existing SNS assessment tools to estimate likely future performance of the system overall. Systems models of SNS operations were constructed and failure mode analyses were performed for each component. Linking data from existing assessments, including the technical assistance review and functional drills, to reliability assessment was demonstrated using publicly available information. The use of failure mode and effects estimates to assess overall response system reliability was demonstrated with a simple simulation example. Reliability analysis appears an attractive way to integrate information from the substantial investment in detailed assessments for stockpile delivery and dispensing to provide a view of likely future response performance.

TraitBank: An Open Digital Repository for Organism Traits

USDA-ARS?s Scientific Manuscript database

TraitBank currently serves over 11 million measurements and facts for more than 1.7 million taxa. These data are mobilized from major biodiversity information systems (e.g., International Union for Conservation of Nature, Ocean Biogeographic Information System, Paleobiology Database), literature sup...

Social adaptation in multi-agent model of linguistic categorization is affected by network information flow.

PubMed

Zubek, Julian; Denkiewicz, Michał; Barański, Juliusz; Wróblewski, Przemysław; Rączaszek-Leonardi, Joanna; Plewczynski, Dariusz

2017-01-01

This paper explores how information flow properties of a network affect the formation of categories shared between individuals, who are communicating through that network. Our work is based on the established multi-agent model of the emergence of linguistic categories grounded in external environment. We study how network information propagation efficiency and the direction of information flow affect categorization by performing simulations with idealized network topologies optimizing certain network centrality measures. We measure dynamic social adaptation when either network topology or environment is subject to change during the experiment, and the system has to adapt to new conditions. We find that both decentralized network topology efficient in information propagation and the presence of central authority (information flow from the center to peripheries) are beneficial for the formation of global agreement between agents. Systems with central authority cope well with network topology change, but are less robust in the case of environment change. These findings help to understand which network properties affect processes of social adaptation. They are important to inform the debate on the advantages and disadvantages of centralized systems.

Social adaptation in multi-agent model of linguistic categorization is affected by network information flow

PubMed Central

Denkiewicz, Michał; Barański, Juliusz; Wróblewski, Przemysław; Rączaszek-Leonardi, Joanna; Plewczynski, Dariusz

2017-01-01

This paper explores how information flow properties of a network affect the formation of categories shared between individuals, who are communicating through that network. Our work is based on the established multi-agent model of the emergence of linguistic categories grounded in external environment. We study how network information propagation efficiency and the direction of information flow affect categorization by performing simulations with idealized network topologies optimizing certain network centrality measures. We measure dynamic social adaptation when either network topology or environment is subject to change during the experiment, and the system has to adapt to new conditions. We find that both decentralized network topology efficient in information propagation and the presence of central authority (information flow from the center to peripheries) are beneficial for the formation of global agreement between agents. Systems with central authority cope well with network topology change, but are less robust in the case of environment change. These findings help to understand which network properties affect processes of social adaptation. They are important to inform the debate on the advantages and disadvantages of centralized systems. PMID:28809957

Measuring health systems strength and its impact: experiences from the African Health Initiative.

PubMed

Sherr, Kenneth; Fernandes, Quinhas; Kanté, Almamy M; Bawah, Ayaga; Condo, Jeanine; Mutale, Wilbroad

2017-12-21

Health systems are essential platforms for accessible, quality health services, and population health improvements. Global health initiatives have dramatically increased health resources; however, funding to strengthen health systems has not increased commensurately, partially due to concerns about health system complexity and evidence gaps demonstrating health outcome improvements. In 2009, the African Health Initiative of the Doris Duke Charitable Foundation began supporting Population Health Implementation and Training Partnership projects in five sub-Saharan African countries (Ghana, Mozambique, Rwanda, Tanzania, and Zambia) to catalyze significant advances in strengthening health systems. This manuscript reflects on the experience of establishing an evaluation framework to measure health systems strength, and associate measures with health outcomes, as part of this Initiative. Using the World Health Organization's health systems building block framework, the Partnerships present novel approaches to measure health systems building blocks and summarize data across and within building blocks to facilitate analytic procedures. Three Partnerships developed summary measures spanning the building blocks using principal component analysis (Ghana and Tanzania) or the balanced scorecard (Zambia). Other Partnerships developed summary measures to simplify multiple indicators within individual building blocks, including health information systems (Mozambique), and service delivery (Rwanda). At the end of the project intervention period, one to two key informants from each Partnership's leadership team were asked to list - in rank order - the importance of the six building blocks in relation to their intervention. Though there were differences across Partnerships, service delivery and information systems were reported to be the most common focus of interventions, followed by health workforce and leadership and governance. Medical products, vaccines and technologies, and health financing, were the building blocks reported to be of lower focus. The African Health Initiative experience furthers the science of evaluation for health systems strengthening, highlighting areas for further methodological development - including the development of valid, feasible measures sensitive to interventions in multiple contexts (particularly in leadership and governance) and describing interactions across building blocks; in developing summary statistics to facilitate testing intervention effects on health systems and associations with health status; and designing appropriate analytic models for complex, multi-level open health systems.

Earth observing system - Concepts and implementation strategy

NASA Technical Reports Server (NTRS)

Hartle, R. E.

1986-01-01

The concepts of an Earth Observing System (EOS), an information system being developed by the EOS Science and Mission Requirements Working Group for international use and planned to begin in the 1990s, are discussed. The EOS is designed to study the factors that control the earth's hydrologic cycle, biochemical cycles, and climatologic processes by combining the measurements from remote sensing instruments, in situ measurement devices, and a data and information system. Three EOS platforms are planned to be launched into low, polar, sun-synchronous orbits during the Space Station's Initial Operating Configuration, one to be provided by ESA and two by the United States.

Reducing Risk of Noise-Induced Hearing Loss in Collegiate Music Ensembles Using Ambient Technology.

PubMed

Powell, Jason; Chesky, Kris

2017-09-01

Student musicians are at risk for noise-induced hearing loss (NIHL) as they develop skills and perform during instructional activities. Studies using longitudinal dosimeter data show that pedagogical procedures and instructor behaviors are highly predictive of NIHL risk, thus implying the need for innovative approaches to increase instructor competency in managing instructional activities without interfering with artistic and academic freedom. Ambient information systems, an emerging trend in human-computer interaction that infuses psychological behavioral theories into technologies, can help construct informative risk-regulating systems. The purpose of this study was to determine the effects of introducing an ambient information system into the ensemble setting. The system used two ambient displays and a counterbalanced within-subjects treatment study design with six jazz ensemble instructors to determine if the system could induce a behavior change that alters trends in measures resulting from dosimeter data. This study assessed efficacy using time series analysis to determine changes in eight statistical measures of behavior over a 9-wk period. Analysis showed that the system was effective, as all instructors showed changes in a combination of measures. This study is in an important step in developing non-interfering technology to reduce NIHL among academic musicians.

Fisher-Symmetric Informationally Complete Measurements for Pure States.

PubMed

Li, Nan; Ferrie, Christopher; Gross, Jonathan A; Kalev, Amir; Caves, Carlton M

2016-05-06

We introduce a new kind of quantum measurement that is defined to be symmetric in the sense of uniform Fisher information across a set of parameters that uniquely represent pure quantum states in the neighborhood of a fiducial pure state. The measurement is locally informationally complete-i.e., it uniquely determines these parameters, as opposed to distinguishing two arbitrary quantum states-and it is maximal in the sense of a multiparameter quantum Cramér-Rao bound. For a d-dimensional quantum system, requiring only local informational completeness allows us to reduce the number of outcomes of the measurement from a minimum close to but below 4d-3, for the usual notion of global pure-state informational completeness, to 2d-1.

Effective Measurement of Reliability of Repairable USAF Systems

DTIC Science & Technology

2012-09-01

Hansen presented a course, Concepts and Models for Repairable Systems Reliability, at the 2009 Centro de Investigacion en Mathematicas ( CIMAT ). The...recurrent event by calculating the mean quantity of recurrent events of the population of systems at risk at that point in time. The number of systems at... risk is the number of systems that are operating and providing information. [9] Information can be obscured by data censoring and truncation. One

14 CFR 413.7 - Application.

Code of Federal Regulations, 2010 CFR

2010-01-01

... issued safety approval. (e) Measurement system consistency. For each analysis, an applicant must employ a consistent measurements system, whether English or metric, in its application and licensing information... writing, in English and filed in duplicate with the Federal Aviation Administration, Associate...

Wind Gust Measurement Techniques-From Traditional Anemometry to New Possibilities.

PubMed

Suomi, Irene; Vihma, Timo

2018-04-23

Information on wind gusts is needed for assessment of wind-induced damage and risks to safety. The measurement of wind gust speed requires a high temporal resolution of the anemometer system, because the gust is defined as a short-duration (seconds) maximum of the fluctuating wind speed. Until the digitalization of wind measurements in the 1990s, the wind gust measurements suffered from limited recording and data processing resources. Therefore, the majority of continuous wind gust records date back at most only by 30 years. Although the response characteristics of anemometer systems are good enough today, the traditional measurement techniques at weather stations based on cup and sonic anemometers are limited to heights and regions where the supporting structures can reach. Therefore, existing measurements are mainly concentrated over densely-populated land areas, whereas from remote locations, such as the marine Arctic, wind gust information is available only from sparse coastal locations. Recent developments of wind gust measurement techniques based on turbulence measurements from research aircraft and from Doppler lidar can potentially provide new information from heights and locations unreachable by traditional measurement techniques. Moreover, fast-developing measurement methods based on Unmanned Aircraft Systems (UASs) may add to better coverage of wind gust measurements in the future. In this paper, we provide an overview of the history and the current status of anemometry from the perspective of wind gusts. Furthermore, a discussion on the potential future directions of wind gust measurement techniques is provided.

Wind Gust Measurement Techniques—From Traditional Anemometry to New Possibilities

PubMed Central

2018-01-01

Information on wind gusts is needed for assessment of wind-induced damage and risks to safety. The measurement of wind gust speed requires a high temporal resolution of the anemometer system, because the gust is defined as a short-duration (seconds) maximum of the fluctuating wind speed. Until the digitalization of wind measurements in the 1990s, the wind gust measurements suffered from limited recording and data processing resources. Therefore, the majority of continuous wind gust records date back at most only by 30 years. Although the response characteristics of anemometer systems are good enough today, the traditional measurement techniques at weather stations based on cup and sonic anemometers are limited to heights and regions where the supporting structures can reach. Therefore, existing measurements are mainly concentrated over densely-populated land areas, whereas from remote locations, such as the marine Arctic, wind gust information is available only from sparse coastal locations. Recent developments of wind gust measurement techniques based on turbulence measurements from research aircraft and from Doppler lidar can potentially provide new information from heights and locations unreachable by traditional measurement techniques. Moreover, fast-developing measurement methods based on Unmanned Aircraft Systems (UASs) may add to better coverage of wind gust measurements in the future. In this paper, we provide an overview of the history and the current status of anemometry from the perspective of wind gusts. Furthermore, a discussion on the potential future directions of wind gust measurement techniques is provided. PMID:29690647

Information security governance: a risk assessment approach to health information systems protection.

PubMed

Williams, Patricia A H

2013-01-01

It is no small task to manage the protection of healthcare data and healthcare information systems. In an environment that is demanding adaptation to change for all information collection, storage and retrieval systems, including those for of e-health and information systems, it is imperative that good information security governance is in place. This includes understanding and meeting legislative and regulatory requirements. This chapter provides three models to educate and guide organisations in this complex area, and to simplify the process of information security governance and ensure appropriate and effective measures are put in place. The approach is risk based, adapted and contextualized for healthcare. In addition, specific considerations of the impact of cloud services, secondary use of data, big data and mobile health are discussed.

Documents Similarity Measurement Using Field Association Terms.

ERIC Educational Resources Information Center

Atlam, El-Sayed; Fuketa, M.; Morita, K.; Aoe, Jun-ichi

2003-01-01

Discussion of text analysis and information retrieval and measurement of document similarity focuses on a new text manipulation system called FA (field association)-Sim that is useful for retrieving information in large heterogeneous texts and for recognizing content similarity in text excerpts. Discusses recall and precision, automatic indexing…

Performance measurement integrated information framework in e-Manufacturing

NASA Astrophysics Data System (ADS)

Teran, Hilaida; Hernandez, Juan Carlos; Vizán, Antonio; Ríos, José

2014-11-01

The implementation of Internet technologies has led to e-Manufacturing technologies becoming more widely used and to the development of tools for compiling, transforming and synchronising manufacturing data through the Web. In this context, a potential area for development is the extension of virtual manufacturing to performance measurement (PM) processes, a critical area for decision making and implementing improvement actions in manufacturing. This paper proposes a PM information framework to integrate decision support systems in e-Manufacturing. Specifically, the proposed framework offers a homogeneous PM information exchange model that can be applied through decision support in e-Manufacturing environment. Its application improves the necessary interoperability in decision-making data processing tasks. It comprises three sub-systems: a data model, a PM information platform and PM-Web services architecture. A practical example of data exchange for measurement processes in the area of equipment maintenance is shown to demonstrate the utility of the model.

A PLM-based automated inspection planning system for coordinate measuring machine

NASA Astrophysics Data System (ADS)

Zhao, Haibin; Wang, Junying; Wang, Boxiong; Wang, Jianmei; Chen, Huacheng

2006-11-01

With rapid progress of Product Lifecycle Management (PLM) in manufacturing industry, automatic generation of inspection planning of product and the integration with other activities in product lifecycle play important roles in quality control. But the techniques for these purposes are laggard comparing with techniques of CAD/CAM. Therefore, an automatic inspection planning system for Coordinate Measuring Machine (CMM) was developed to improve the automatization of measuring based on the integration of inspection system in PLM. Feature information representation is achieved based on a PLM canter database; measuring strategy is optimized through the integration of multi-sensors; reasonable number and distribution of inspection points are calculated and designed with the guidance of statistic theory and a synthesis distribution algorithm; a collision avoidance method is proposed to generate non-collision inspection path with high efficiency. Information mapping is performed between Neutral Interchange Files (NIFs), such as STEP, DML, DMIS, XML, etc., to realize information integration with other activities in the product lifecycle like design, manufacturing and inspection execution, etc. Simulation was carried out to demonstrate the feasibility of the proposed system. As a result, the inspection process is becoming simpler and good result can be got based on the integration in PLM.

Develop security architecture for both in-house healthcare information systems and electronic patient record

NASA Astrophysics Data System (ADS)

Zhang, Jianguo; Chen, Xiaomeng; Zhuang, Jun; Jiang, Jianrong; Zhang, Xiaoyan; Wu, Dongqing; Huang, H. K.

2003-05-01

In this paper, we presented a new security approach to provide security measures and features in both healthcare information systems (PACS, RIS/HIS), and electronic patient record (EPR). We introduced two security components, certificate authoring (CA) system and patient record digital signature management (DSPR) system, as well as electronic envelope technology, into the current hospital healthcare information infrastructure to provide security measures and functions such as confidential or privacy, authenticity, integrity, reliability, non-repudiation, and authentication for in-house healthcare information systems daily operating, and EPR exchanging among the hospitals or healthcare administration levels, and the DSPR component manages the all the digital signatures of patient medical records signed through using an-symmetry key encryption technologies. The electronic envelopes used for EPR exchanging are created based on the information of signers, digital signatures, and identifications of patient records stored in CAS and DSMS, as well as the destinations and the remote users. The CAS and DSMS were developed and integrated into a RIS-integrated PACS, and the integration of these new security components is seamless and painless. The electronic envelopes designed for EPR were used successfully in multimedia data transmission.

Concepts for a standard based cross-organisational information security management system in the context of a nationwide EHR.

PubMed

Mense, Alexander; Hoheiser-Pförtner, Franz; Schmid, Martin; Wahl, Harald

2013-01-01

Working with health related data necessitates appropriate levels of security and privacy. Information security, meaning ensuring confidentiality, integrity, and availability, is more organizational, than technical in nature. It includes many organizational and management measures, is based on well-defined security roles, processes, and documents, and needs permanent adaption of security policies, continuously monitoring, and measures assessment. This big challenge for any organization leads to implementation of an information security management system (ISMS). In the context of establishing a regional or national electronic health record for integrated care (ICEHR), the situation is worse. Changing the medical information exchange from on-demand peer-to-peer connections to health information networks requires all organizations participating in the EHR system to have consistent security levels and to follow the same security guidelines and rules. Also, the implementation must be monitored and audited, establishing cross-organizational information security management systems (ISMS) based on international standards. This paper evaluates requirements and defines basic concepts for an ISO 27000 series-based cross-organizational ISMS in the healthcare domain and especially for the implementation of the nationwide electronic health record in Austria (ELGA).

The Value of Information for Populations in Varying Environments

NASA Astrophysics Data System (ADS)

Rivoire, Olivier; Leibler, Stanislas

2011-04-01

The notion of information pervades informal descriptions of biological systems, but formal treatments face the problem of defining a quantitative measure of information rooted in a concept of fitness, which is itself an elusive notion. Here, we present a model of population dynamics where this problem is amenable to a mathematical analysis. In the limit where any information about future environmental variations is common to the members of the population, our model is equivalent to known models of financial investment. In this case, the population can be interpreted as a portfolio of financial assets and previous analyses have shown that a key quantity of Shannon's communication theory, the mutual information, sets a fundamental limit on the value of information. We show that this bound can be violated when accounting for features that are irrelevant in finance but inherent to biological systems, such as the stochasticity present at the individual level. This leads us to generalize the measures of uncertainty and information usually encountered in information theory.

A possible role for a paralemniscal auditory pathway in the coding of slow temporal information

PubMed Central

Abrams, Daniel A.; Nicol, Trent; Zecker, Steven; Kraus, Nina

2010-01-01

Low frequency temporal information present in speech is critical for normal perception, however the neural mechanism underlying the differentiation of slow rates in acoustic signals is not known. Data from the rat trigeminal system suggest that the paralemniscal pathway may be specifically tuned to code low-frequency temporal information. We tested whether this phenomenon occurs in the auditory system by measuring the representation of temporal rate in lemniscal and paralemniscal auditory thalamus and cortex in guinea pig. Similar to the trigeminal system, responses measured in auditory thalamus indicate that slow rates are differentially represented in a paralemniscal pathway. In cortex, both lemniscal and paralemniscal neurons indicated sensitivity to slow rates. We speculate that a paralemniscal pathway in the auditory system may be specifically tuned to code low frequency temporal information present in acoustic signals. These data suggest that somatosensory and auditory modalities have parallel sub-cortical pathways that separately process slow rates and the spatial representation of the sensory periphery. PMID:21094680

Developing Data Systems To Support the Analysis and Development of Large-Scale, On-Line Assessment.

ERIC Educational Resources Information Center

Yu, Chong Ho

Today many data warehousing systems are data rich, but information poor. Extracting useful information from an ocean of data to support administrative, policy, and instructional decisions becomes a major challenge to both database designers and measurement specialists. This paper focuses on the development of a data processing system that…

Progress on the development of skin friction sensors.

NASA Technical Reports Server (NTRS)

Mcvey, E. S.; Moore, J. W.

1972-01-01

A skin friction measuring system is described which will operate to 2000 F for short periods of time and continuously to 1300 F. A prototype system has been constructed and is being placed in operation. Information on alternative feasible systems is presented. Emphasis is placed on presenting research results in the form of useful design information and experimental data.

Development of an Electronic Portfolio System Success Model: An Information Systems Approach

ERIC Educational Resources Information Center

Balaban, Igor; Mu, Enrique; Divjak, Blazenka

2013-01-01

This research has two main goals: to develop an instrument for assessing Electronic Portfolio (ePortfolio) success and to build a corresponding ePortfolio success model using DeLone and McLean's information systems success model as the theoretical framework. For this purpose, we developed an ePortfolio success measurement instrument and structural…

Fusion of light-field and photogrammetric surface form data

NASA Astrophysics Data System (ADS)

Sims-Waterhouse, Danny; Piano, Samanta; Leach, Richard K.

2017-08-01

Photogrammetry based systems are able to produce 3D reconstructions of an object given a set of images taken from different orientations. In this paper, we implement a light-field camera within a photogrammetry system in order to capture additional depth information, as well as the photogrammetric point cloud. Compared to a traditional camera that only captures the intensity of the incident light, a light-field camera also provides angular information for each pixel. In principle, this additional information allows 2D images to be reconstructed at a given focal plane, and hence a depth map can be computed. Through the fusion of light-field and photogrammetric data, we show that it is possible to improve the measurement uncertainty of a millimetre scale 3D object, compared to that from the individual systems. By imaging a series of test artefacts from various positions, individual point clouds were produced from depth-map information and triangulation of corresponding features between images. Using both measurements, data fusion methods were implemented in order to provide a single point cloud with reduced measurement uncertainty.

Set membership experimental design for biological systems.

PubMed

Marvel, Skylar W; Williams, Cranos M

2012-03-21

Experimental design approaches for biological systems are needed to help conserve the limited resources that are allocated for performing experiments. The assumptions used when assigning probability density functions to characterize uncertainty in biological systems are unwarranted when only a small number of measurements can be obtained. In these situations, the uncertainty in biological systems is more appropriately characterized in a bounded-error context. Additionally, effort must be made to improve the connection between modelers and experimentalists by relating design metrics to biologically relevant information. Bounded-error experimental design approaches that can assess the impact of additional measurements on model uncertainty are needed to identify the most appropriate balance between the collection of data and the availability of resources. In this work we develop a bounded-error experimental design framework for nonlinear continuous-time systems when few data measurements are available. This approach leverages many of the recent advances in bounded-error parameter and state estimation methods that use interval analysis to generate parameter sets and state bounds consistent with uncertain data measurements. We devise a novel approach using set-based uncertainty propagation to estimate measurement ranges at candidate time points. We then use these estimated measurements at the candidate time points to evaluate which candidate measurements furthest reduce model uncertainty. A method for quickly combining multiple candidate time points is presented and allows for determining the effect of adding multiple measurements. Biologically relevant metrics are developed and used to predict when new data measurements should be acquired, which system components should be measured and how many additional measurements should be obtained. The practicability of our approach is illustrated with a case study. This study shows that our approach is able to 1) identify candidate measurement time points that maximize information corresponding to biologically relevant metrics and 2) determine the number at which additional measurements begin to provide insignificant information. This framework can be used to balance the availability of resources with the addition of one or more measurement time points to improve the predictability of resulting models.

Set membership experimental design for biological systems

PubMed Central

2012-01-01

Background Experimental design approaches for biological systems are needed to help conserve the limited resources that are allocated for performing experiments. The assumptions used when assigning probability density functions to characterize uncertainty in biological systems are unwarranted when only a small number of measurements can be obtained. In these situations, the uncertainty in biological systems is more appropriately characterized in a bounded-error context. Additionally, effort must be made to improve the connection between modelers and experimentalists by relating design metrics to biologically relevant information. Bounded-error experimental design approaches that can assess the impact of additional measurements on model uncertainty are needed to identify the most appropriate balance between the collection of data and the availability of resources. Results In this work we develop a bounded-error experimental design framework for nonlinear continuous-time systems when few data measurements are available. This approach leverages many of the recent advances in bounded-error parameter and state estimation methods that use interval analysis to generate parameter sets and state bounds consistent with uncertain data measurements. We devise a novel approach using set-based uncertainty propagation to estimate measurement ranges at candidate time points. We then use these estimated measurements at the candidate time points to evaluate which candidate measurements furthest reduce model uncertainty. A method for quickly combining multiple candidate time points is presented and allows for determining the effect of adding multiple measurements. Biologically relevant metrics are developed and used to predict when new data measurements should be acquired, which system components should be measured and how many additional measurements should be obtained. Conclusions The practicability of our approach is illustrated with a case study. This study shows that our approach is able to 1) identify candidate measurement time points that maximize information corresponding to biologically relevant metrics and 2) determine the number at which additional measurements begin to provide insignificant information. This framework can be used to balance the availability of resources with the addition of one or more measurement time points to improve the predictability of resulting models. PMID:22436240

Acoustic building infiltration measurement system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muehleisen, Ralph T.; Raman, Ganesh

Systems and methods of detecting and identifying a leak from a container or building. Acoustic pressure and velocity are measured. Acoustic properties are acquired from the measured values. The acoustic properties are converted to infiltration/leakage information. Nearfield Acoustic Holography (NAH) may be one method to detect the leakages from a container by locating the noise sources.

Classroom Composition and Measured Teacher Performance: What Do Teacher Observation Scores Really Measure?

ERIC Educational Resources Information Center

Steinberg, Matthew P.; Garrett, Rachel

2016-01-01

As states and districts implement more rigorous teacher evaluation systems, measures of teacher performance are increasingly being used to support instruction and inform retention decisions. Classroom observations take a central role in these systems, accounting for the majority of teacher ratings upon which accountability decisions are based.…

Evaluating hospital information systems from the point of view of the medical records section users in Medical-Educational Hospitals of Kermanshah 2014.

PubMed

Rostami, S; Sarmad, A; Mohammadi, M; Cheleie, M; Amiri, S; Zardoei Golanbary, S H

2015-01-01

Evaluating hospital information systems leads to the improvement and devotion based on the users' needs, especially the medical records section users in hospitals, which are in contact with this system from the moment the patient enters the hospital until his/ her release and after that. The present research aimed to evaluate the hospital information systems from the point of view of the medical record section employees. Materials and method : The current research was applicative-descriptive analytical and the research society included 70 users of the medical history section in the educational-medical centers of Kermanshah city. The data-gathering tool was the 10th part of 9241/ 10 Isometric standard questionnaire of evaluating hospital information systems, with 75 specific questions in 7 bases, with the five spectra Likertt scale, its conceptual admissibility being confirmed in previous researches. 22 SPSS statistical software analyzed its permanency in the present study, which was also confirmed by Cronbach's's alpha test, which equaled to 0.89, and the data. Findings : The highest level of the employees' satisfaction, based on gained scores median, was respectively the incompatibility with the users' expectations, measuring 3.55, self-description measuring 3.54 and controllability - 3.51, which in total presented the average scores of 3.39, the lowest level of satisfaction being related to useful learning , whose value was 3.19. Discussion and conclusion : Hospital information systems' users believe that it is more desirable that the existing systems are based on the measures and consider them proper for making them non-governmental and useful for undesired learning. Considering the long distance of the existing information systems with the desired performance, it is essential that "these systems pay more attention to a more complete and deeper recognition and awareness of users' opinions and requirements in their road. The movement and development is to increase their chance in succeeding and achieving their goals, where the goal is to improve the patients' care and improve the health of the society members with the help of information technology.

On Fisher Information and Thermodynamics

EPA Science Inventory

Fisher information is a measure of the information obtainable by an observer from the observation of reality. However, information is obtainable only when there are patterns or features to observe, and these only exist when there is order. For example, a system in perfect disor...

Quantitative Metrics for Provenance in the Global Change Information System

NASA Astrophysics Data System (ADS)

Sherman, R. A.; Tipton, K.; Elamparuthy, A.

2017-12-01

The Global Change Information System (GCIS) is an open-source web-based resource to provide traceable provenance for government climate information, particularly the National Climate Assessment and other climate science reports from the U.S. Global Change Research Program. Since 2014, GCIS has been adding and updating information and linking records to make the system as complete as possible for the key reports. Our total count of records has grown to well over 20,000, but until recently there hasn't been an easy way to measure how well all those records were serving the mission of providing provenance. The GCIS team has recently established quantitative measures of whether each record has sufficient metadata and linkages to be useful for users of our featured climate reports. We will describe our metrics and show how they can be used to guide future development of GCIS and aid users of government climate data.

National energy efficient driving system (NEEDS). Volume 3, Home vehicle use study

DOT National Transportation Integrated Search

1981-12-15

Eight vehicles were instrumented to permit travel distance and fuel consumption to be measured. Following the collection of baseline measures, three different systems were provided to feed back distance and fuel information to drivers: manual, a week...

Connecting Medical Records: An Evaluation of Benefits and Challenges for Primary Care Practices.

PubMed

Compeau, Deborah Ruth; Terry, Amanda

2017-06-30

Implementation of systems to support health information sharing has lagged other areas of healthcare IT, yet offers a strong possibility for benefit.  Clinical acceptance is a key limiting factor in health IT adoption. To assess the benefits and challenges experienced by clinicians using a custom-developed health information exchange system, and to show how perceptions of benefits and challenges influence perceptions of productivity and care-related outcomes. We used a mixed methods design with two phases. First, we conducted interviews with stakeholders who were familiar with the health information exchange system to inform the development of a measure of benefits and challenges of the use of this system. Second, using this measure we conducted a survey of current and former users of the health information exchange system using a modified Dillman method. 105 current and former users completed the survey. The results showed information quality, ease of completing tasks and clinical process improvement as key benefits that reduced workload and improved patient care.  Challenges related to system reliability, quality of reports and service quality increased workload and decreased impact on care, though the effect of the challenges was smaller than that of the benefits.  Even very limited health information exchange capabilities can improve outcomes for primary care users.  Improving perceptions of benefits may be even more important the removing challenges to use, though it is likely that a threshold of quality must be achieved for this to be true.

Seamless personal health information system in cloud computing.

PubMed

Chung, Wan-Young; Fong, Ee May

2014-01-01

Noncontact ECG measurement has gained popularity these days due to its noninvasive and conveniences to be applied on daily life. This approach does not require any direct contact between patient's skin and sensor for physiological signal measurement. The noncontact ECG measurement is integrated with mobile healthcare system for health status monitoring. Mobile phone acts as the personal health information system displaying health status and body mass index (BMI) tracking. Besides that, it plays an important role being the medical guidance providing medical knowledge database including symptom checker and health fitness guidance. At the same time, the system also features some unique medical functions that cater to the living demand of the patients or users, including regular medication reminders, alert alarm, medical guidance, appointment scheduling. Lastly, we demonstrate mobile healthcare system with web application for extended uses, thus health data are clouded into web server system and web database storage. This allows remote health status monitoring easily and so forth it promotes a cost effective personal healthcare system.

Secure alignment of coordinate systems using quantum correlation

NASA Astrophysics Data System (ADS)

Rezazadeh, F.; Mani, A.; Karimipour, V.

2017-08-01

We show that two parties far apart can use shared entangled states and classical communication to align their coordinate systems with a very high fidelity. Moreover, compared with previous methods proposed for such a task, i.e., sending parallel or antiparallel pairs or groups of spin states, our method has the extra advantages of using single-qubit measurements and also being secure, so that third parties do not extract any information about the aligned coordinate system established between the two parties. The latter property is important in many other quantum information protocols in which measurements inevitably play a significant role.

OLEM Performance Assessment Information

EPA Pesticide Factsheets

This asset includes a variety of data sets that measure the performance of Office of Land and Emergency Management (OLEM) programs in support of the Office of the Chief Financial Officer's Annual Commitment System (ACS) and Performance Evaluation Reporting System (PERS). Information is drawn from OLEM's ACRES, RCRAInfo, CERCLIS/SEMS, ICIS, and LUST4 systems, as well as input manually by authorized individuals in OLEM's program offices. Information is reviewed by OLEM program staff prior to being pushed to ACS and entered into PERS. This data asset also pulls in certain performance information input directly by Regional Office staff into ACS. Information is managed by the Performance Assessment Tool (PAT) and displayed in the PAT Dashboard.Information in this asset include:--Government Performance and Results Act (GPRA) of 1993: Measures reported for Innovations, Partnerships and Communications Office (IPCO), the Office of Brownfields and Land Revitalization (OBLR), the Office of Emergency Management (OEM), the Office of Resource Conservation and Recovery (ORCR), the Office of Superfund Remediation and Technology Innovation (OSRTI), and the Office of Underground Storage Tanks (OUST).-- Performance and Environmental Results System (PERS): Includes OLEM's information on performance results and baselines for the EPA Annual Plan and Budget.--Key Performance Indicators: OLEM has identified five KPIs that are tracked annually.--Integrated Cleanup Initiative: A pilot pe

Quantum information theory of the Bell-state quantum eraser

NASA Astrophysics Data System (ADS)

Glick, Jennifer R.; Adami, Christoph

2017-01-01

Quantum systems can display particle- or wavelike properties, depending on the type of measurement that is performed on them. The Bell-state quantum eraser is an experiment that brings the duality to the forefront, as a single measurement can retroactively be made to measure particlelike or wavelike properties (or anything in between). Here we develop a unitary information-theoretic description of this and several related quantum measurement situations that sheds light on the trade-off between the quantum and classical features of the measurement. In particular, we show that both the coherence of the quantum state and the classical information obtained from it can be described using only quantum-information-theoretic tools and that those two measures satisfy an equality on account of the chain rule for entropies. The coherence information and the which-path information have simple interpretations in terms of state preparation and state determination and suggest ways to account for the relationship between the classical and the quantum world.

Medical privacy protection based on granular computing.

PubMed

Wang, Da-Wei; Liau, Churn-Jung; Hsu, Tsan-Sheng

2004-10-01

Based on granular computing methodology, we propose two criteria to quantitatively measure privacy invasion. The total cost criterion measures the effort needed for a data recipient to find private information. The average benefit criterion measures the benefit a data recipient obtains when he received the released data. These two criteria remedy the inadequacy of the deterministic privacy formulation proposed in Proceedings of Asia Pacific Medical Informatics Conference, 2000; Int J Med Inform 2003;71:17-23. Granular computing methodology provides a unified framework for these quantitative measurements and previous bin size and logical approaches. These two new criteria are implemented in a prototype system Cellsecu 2.0. Preliminary system performance evaluation is conducted and reviewed.

An improved arterial pulsation measurement system based on optical triangulation and its application in the traditional Chinese medicine

NASA Astrophysics Data System (ADS)

Wu, Jih-Huah; Lee, Wen-Li; Lee, Yun-Parn; Lin, Ching-Huang; Chiou, Ji-Yi; Tai, Chuan-Fu; Jiang, Joe-Air

2011-08-01

An improved arterial pulsation measurement (APM) system that uses three LED light sources and a CCD image sensor to measure pulse waveforms of artery is presented. The relative variations of the pulses at three measurement points near wrist joints can be determined by the APM system simultaneously. The height of the arterial pulsations measured by the APM system achieves a resolution of better than 2 μm. These pulsations contain useful information that can be used as diagnostic references in the traditional Chinese medicine (TCM) in the future.

State dependent optimization of measurement policy

NASA Astrophysics Data System (ADS)

Konkarikoski, K.

2010-07-01

Measurements are the key to rational decision making. Measurement information generates value, when it is applied in the decision making. An investment cost and maintenance costs are associated with each component of the measurement system. Clearly, there is - under a given set of scenarios - a measurement setup that is optimal in expected (discounted) utility. This paper deals how the measurement policy optimization is affected by different system states and how this problem can be tackled.

What's working, what's not: The monitoring and reporting system for Tasmania's national parks and reserves

Treesearch

Glenys Jones

2015-01-01

This paper describes the Australian State of Tasmania's management effectiveness Monitoring and Reporting System for national parks and reserves. This jurisdictional performance measurement system is designed to provide all interested parties with reliable factual information and measured evidence about reserve management achievements, progress and challenges. Key...

49 CFR 1520.5 - Sensitive security information.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., including threats against cyber infrastructure. (8) Security measures. Specific details of aviation...) Critical aviation, maritime, or rail infrastructure asset information. Any list identifying systems or...

49 CFR 1520.5 - Sensitive security information.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., including threats against cyber infrastructure. (8) Security measures. Specific details of aviation...) Critical aviation, maritime, or rail infrastructure asset information. Any list identifying systems or...

49 CFR 1520.5 - Sensitive security information.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., including threats against cyber infrastructure. (8) Security measures. Specific details of aviation...) Critical aviation, maritime, or rail infrastructure asset information. Any list identifying systems or...

49 CFR 1520.5 - Sensitive security information.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., including threats against cyber infrastructure. (8) Security measures. Specific details of aviation...) Critical aviation, maritime, or rail infrastructure asset information. Any list identifying systems or...

Informatics Resources to Support Health Care Quality Improvement in the Veterans Health Administration

PubMed Central

Hynes, Denise M.; Perrin, Ruth A.; Rappaport, Steven; Stevens, Joanne M.; Demakis, John G.

2004-01-01

Information systems are increasingly important for measuring and improving health care quality. A number of integrated health care delivery systems use advanced information systems and integrated decision support to carry out quality assurance activities, but none as large as the Veterans Health Administration (VHA). The VHA's Quality Enhancement Research Initiative (QUERI) is a large-scale, multidisciplinary quality improvement initiative designed to ensure excellence in all areas where VHA provides health care services, including inpatient, outpatient, and long-term care settings. In this paper, we describe the role of information systems in the VHA QUERI process, highlight the major information systems critical to this quality improvement process, and discuss issues associated with the use of these systems. PMID:15187063

Measuring information interactions on the ordinal pattern of stock time series

NASA Astrophysics Data System (ADS)

Zhao, Xiaojun; Shang, Pengjian; Wang, Jing

2013-02-01

The interactions among time series as individual components of complex systems can be quantified by measuring to what extent they exchange information among each other. In many applications, one focuses not on the original series but on its ordinal pattern. In such cases, trivial noises appear more likely to be filtered and the abrupt influence of extreme values can be weakened. Cross-sample entropy and inner composition alignment have been introduced as prominent methods to estimate the information interactions of complex systems. In this paper, we modify both methods to detect the interactions among the ordinal pattern of stock return and volatility series, and we try to uncover the information exchanges across sectors in Chinese stock markets.

Partial quantum information.

PubMed

Horodecki, Michał; Oppenheim, Jonathan; Winter, Andreas

2005-08-04

Information--be it classical or quantum--is measured by the amount of communication needed to convey it. In the classical case, if the receiver has some prior information about the messages being conveyed, less communication is needed. Here we explore the concept of prior quantum information: given an unknown quantum state distributed over two systems, we determine how much quantum communication is needed to transfer the full state to one system. This communication measures the partial information one system needs, conditioned on its prior information. We find that it is given by the conditional entropy--a quantity that was known previously, but lacked an operational meaning. In the classical case, partial information must always be positive, but we find that in the quantum world this physical quantity can be negative. If the partial information is positive, its sender needs to communicate this number of quantum bits to the receiver; if it is negative, then sender and receiver instead gain the corresponding potential for future quantum communication. We introduce a protocol that we term 'quantum state merging' which optimally transfers partial information. We show how it enables a systematic understanding of quantum network theory, and discuss several important applications including distributed compression, noiseless coding with side information, multiple access channels and assisted entanglement distillation.

Acoustic systems for the measurement of streamflow

USGS Publications Warehouse

Laenen, Antonius; Smith, Winchell

1983-01-01

The acoustic velocity meter (AVM), also referred to as an ultrasonic flowmeter, has been an operational tool for the measurement of streamflow since 1965. Very little information is available concerning AVM operation, performance, and limitations. The purpose of this report is to consolidate information in such a manner as to provide a better understanding about the application of this instrumentation to streamflow measurement. AVM instrumentation is highly accurate and nonmechanical. Most commercial AVM systems that measure streamflow use the time-of-travel method to determine a velocity between two points. The systems operate on the principle that point-to-point upstream travel-time of sound is longer than the downstream travel-time, and this difference can be monitored and measured accurately by electronics. AVM equipment has no practical upper limit of measurable velocity if sonic transducers are securely placed and adequately protected. AVM systems used in streamflow measurement generally operate with a resolution of ?0.01 meter per second but this is dependent on system frequency, path length, and signal attenuation. In some applications the performance of AVM equipment may be degraded by multipath interference, signal bending, signal attenuation, and variable streamline orientation. Presently used minicomputer systems, although expensive to purchase and maintain, perform well. Increased use of AVM systems probably will be realized as smaller, less expensive, and more conveniently operable microprocessor-based systems become readily available. Available AVM equipment should be capable of flow measurement in a wide variety of situations heretofore untried. New signal-detection techniques and communication linkages can provide additional flexibility to the systems so that operation is possible in more river and estuary situations.

System and method for identifying, validating, weighing and characterizing moving or stationary vehicles and cargo

DOEpatents

Beshears, David L.; Batsell, Stephen G.; Abercrombie, Robert K.; Scudiere, Matthew B.; White, Clifford P.

2007-12-04

An asset identification and information infrastructure management (AI3M) device having an automated identification technology system (AIT), a Transportation Coordinators' Automated Information for Movements System II (TC-AIMS II), a weigh-in-motion system (WIM-II), and an Automated Air Load Planning system (AALPS) all in electronic communication for measuring and calculating actual asset characteristics, either statically or in-motion, and further calculating an actual load plan.

Measuring Integration of Cancer Services to Support Performance Improvement: The CSI Survey

PubMed Central

Dobrow, Mark J.; Paszat, Lawrence; Golden, Brian; Brown, Adalsteinn D.; Holowaty, Eric; Orchard, Margo C.; Monga, Neerav; Sullivan, Terrence

2009-01-01

Objective: To develop a measure of cancer services integration (CSI) that can inform clinical and administrative decision-makers in their efforts to monitor and improve cancer system performance. Methods: We employed a systematic approach to measurement development, including review of existing cancer/health services integration measures, key-informant interviews and focus groups with cancer system leaders. The research team constructed a Web-based survey that was field- and pilot-tested, refined and then formally conducted on a sample of cancer care providers and administrators in Ontario, Canada. We then conducted exploratory factor analysis to identify key dimensions of CSI. Results: A total of 1,769 physicians, other clinicians and administrators participated in the survey, responding to a 67-item questionnaire. The exploratory factor analysis identified 12 factors that were linked to three broader dimensions: clinical, functional and vertical system integration. Conclusions: The CSI Survey provides important insights on a range of typically unmeasured aspects of the coordination and integration of cancer services, representing a new tool to inform performance improvement efforts. PMID:20676250

A zero-knowledge protocol for nuclear warhead verification

NASA Astrophysics Data System (ADS)

Glaser, Alexander; Barak, Boaz; Goldston, Robert J.

2014-06-01

The verification of nuclear warheads for arms control involves a paradox: international inspectors will have to gain high confidence in the authenticity of submitted items while learning nothing about them. Proposed inspection systems featuring `information barriers', designed to hide measurements stored in electronic systems, are at risk of tampering and snooping. Here we show the viability of a fundamentally new approach to nuclear warhead verification that incorporates a zero-knowledge protocol, which is designed in such a way that sensitive information is never measured and so does not need to be hidden. We interrogate submitted items with energetic neutrons, making, in effect, differential measurements of both neutron transmission and emission. Calculations for scenarios in which material is diverted from a test object show that a high degree of discrimination can be achieved while revealing zero information. Our ideas for a physical zero-knowledge system could have applications beyond the context of nuclear disarmament. The proposed technique suggests a way to perform comparisons or computations on personal or confidential data without measuring the data in the first place.

Measuring quantum effects in photosynthetic light-harvesting complexes with multipartite entanglement

NASA Astrophysics Data System (ADS)

Smyth, Cathal

This thesis is a compilation of studies on delocalization measures, entanglement, and the role of quantum coherence in electronic energy transfer (EET) in light-harvesting complexes. The first two chapters after the introduction provide foundational knowledge of quantum information and light-harvesting, respectively. Chapter 2 introduces concepts from quantum information such as purity, bipartite entanglement and criteria for its measurement. The peripheral light-harvesting complex LH2, isolated from the anoxygenic purple bacterium Rhodopseudomonas acidophila, is employed as model system of interest. This light-harvesting complex, along with a description of the process of light-harvesting, the presence of quantum coherence, and the different models used to simulate EET, are described in chapter 3. In combination these two chapters lay the foundation for chapter 4, a critical assessment of the current measures of delocalization employed in EET studies, their relationship, and overall effectiveness. The conclusion is that entanglement based measures are most effective at measuring quantum effects, and that they can be related to more conventional delocalization measures such as the inverse participation ratio (IPR) by taking into account the entropy of the system under study. All the measures within this chapter are known as bipartite measures, and only measure the strength of correlation between two sites. The fifth chapter presents the core of this thesis. Following a brief introduction to the concept of multipartite entanglement, the development of multipartite delocalization measures that give high-resolution information on quantum coherence in light-harvesting complexes is detailed. In contrast to other measures, these analytical measures can detect many body correlations in large systems undergoing decoherence. We determine that, much like the bipartite entanglement based measures of chapter 4, these measures are also a function of system entropy, and have a similar hierarchial structure as that of multipartite entanglement measures. The final chapter applies these measures to our model LH2 complex, and draws conclusions on the role of bipartite delocalization and multipartite delocalization in EET.

Modular Engine Instrumentation System

NASA Technical Reports Server (NTRS)

Rice, W. J.; Birchenough, A. G.

1982-01-01

System that provides information and measurements never obtained before in real time has been developed. System shows not only real-time measurements but also results of computations of key combustion parameters in meaningful and easily understood display. Standard commercially-available shaft encoder plus data from pressure transducer act as principal drivers to device. Eventually, modular system could be developed into onboard controller for automobile engines.

Factors motivating and affecting health information exchange usage

PubMed Central

Zhao, Hongwei; Jaspserson, 'Jon; Gamm, Larry D; Ohsfeldt, Robert L

2011-01-01

Objective Health information exchange (HIE) is the process of electronically sharing patient-level information between providers. However, where implemented, reports indicate HIE system usage is low. The aim of this study was to determine the factors associated with different types of HIE usage. Design Cross-sectional analysis of clinical data from emergency room encounters included in an operational HIE effort linked to system user logs using crossed random-intercept logistic regression. Measurements Independent variables included factors indicative of information needs. System usage was measured as none, basic usage, or a novel pattern of usage. Results The system was accessed for 2.3% of all encounters (6142 out of 271 305). Novel usage patterns were more likely for more complex patients. The odds of HIE usage were lower in the face of time constraints. In contrast to expectations, system usage was lower when the patient was unfamiliar to the facility. Limitations Because of differences between HIE efforts and the fact that not all types of HIE usage (ie, public health) could be included in the analysis, results are limited in terms of generalizablity. Conclusions This study of actual HIE system usage identifies patients and circumstances in which HIE is more likely to be used and factors that are likely to discourage usage. The paper explores the implications of the findings for system redesign, information integration across exchange partners, and for meaningful usage criteria emerging from provisions of the Health Information Technology for Economic & Clinical Health Act. PMID:21262919

Automated identification of wound information in clinical notes of patients with heart diseases: Developing and validating a natural language processing application.

PubMed

Topaz, Maxim; Lai, Kenneth; Dowding, Dawn; Lei, Victor J; Zisberg, Anna; Bowles, Kathryn H; Zhou, Li

2016-12-01

Electronic health records are being increasingly used by nurses with up to 80% of the health data recorded as free text. However, only a few studies have developed nursing-relevant tools that help busy clinicians to identify information they need at the point of care. This study developed and validated one of the first automated natural language processing applications to extract wound information (wound type, pressure ulcer stage, wound size, anatomic location, and wound treatment) from free text clinical notes. First, two human annotators manually reviewed a purposeful training sample (n=360) and random test sample (n=1100) of clinical notes (including 50% discharge summaries and 50% outpatient notes), identified wound cases, and created a gold standard dataset. We then trained and tested our natural language processing system (known as MTERMS) to process the wound information. Finally, we assessed our automated approach by comparing system-generated findings against the gold standard. We also compared the prevalence of wound cases identified from free-text data with coded diagnoses in the structured data. The testing dataset included 101 notes (9.2%) with wound information. The overall system performance was good (F-measure is a compiled measure of system's accuracy=92.7%), with best results for wound treatment (F-measure=95.7%) and poorest results for wound size (F-measure=81.9%). Only 46.5% of wound notes had a structured code for a wound diagnosis. The natural language processing system achieved good performance on a subset of randomly selected discharge summaries and outpatient notes. In more than half of the wound notes, there were no coded wound diagnoses, which highlight the significance of using natural language processing to enrich clinical decision making. Our future steps will include expansion of the application's information coverage to other relevant wound factors and validation of the model with external data. Copyright © 2016 Elsevier Ltd. All rights reserved.

THE CONCEPT OF A COMMUNITY INFORMATION SYSTEM TO MEASURE THE QUALITY OF PUBLIC SERVICES,

DTIC Science & Technology

The community information system would consist of the collection of data relevant to public service quality , the periodic reporting of this data in a summarized, sharply focused form, and the application of reliable performance measures to it. The primary purpose of the CIS...groups in forming balanced judgments and making decisions concerning the service they receive. A secondary purpose would be to increase service quality by making it more visible to the public. (Author)

In Situ Multi-Species (O2, N2, Fuel, Other) Fiber Optic Sensor for Fuel Tank Ullage

NASA Technical Reports Server (NTRS)

Nguyen, Quang-Viet

2007-01-01

A rugged and compact fiber optic sensor system for in situ real-time measurement of nitrogen (N2), oxygen (O2), hydrocarbon (HC) fuel vapors, and other gases has been developed over the past several years at Glenn Research Center. The intrinsically-safe, solid-state fiber optic sensor system provides a 1% precision measurement (by volume) of multiple gases in a 5-sec time window. The sensor has no consumable parts to wear out and requires less than 25 W of electrical power to operate. The sensor head is rugged and compact and is ideal for use in harsh environments such as inside an aircraft fuel tank, or as a feedback sensor in the vent-box of an on-board inert gas generation system (OBIGGS). Multiple sensor heads can be monitored with a single optical detection unit for a cost-effective multi-point sensor system. The present sensor technology is unique in its ability to measure N2 concentration directly, and in its ability to differentiate different types of HC fuels. The present sensor system provides value-added aircraft safety information by simultaneously and directly measuring the nitrogen-oxygen-fuel triplet, which provides the following advantages: (1) information regarding the extent of inerting by N2, (2) information regarding the chemical equivalence ratio, (3) information regarding the composition of the aircraft fuel, and (4) by providing a self-consistent calibration by utilizing a singular sensor for all species. Using the extra information made available by this sensor permits the ignitability of a fuel-oxidizer mixture to be more accurately characterized, which may permit a reduction in the amount of inerting required on a real-time basis, and yet still maintain a fire-safe fuel tank. This translates to an increase in fuel tank fire-safety through a better understanding of the physics of fuel ignition, and at the same time, a reduction in compressed bleed air usage and concomitant aircraft operational costs over the long-run. The present fiber optic sensor can also be used as a false-alarm-free engine/hidden/cargo space fire detector (by measuring increased CO2 and CO, and decreased O2), a multi-point in situ measurement and certification system for halogenated-compound fire protection systems, and for the testing and certification of other aircraft safety sensor systems. The technology (LEW-17826-1) developed in the present sensor system is patent pending.

High Throughput System for Plant Height and Hyperspectral Measurement

NASA Astrophysics Data System (ADS)

Zhao, H.; Xu, L.; Jiang, H.; Shi, S.; Chen, D.

2018-04-01

Hyperspectral and three-dimensional measurement can obtain the intrinsic physicochemical properties and external geometrical characteristics of objects, respectively. Currently, a variety of sensors are integrated into a system to collect spectral and morphological information in agriculture. However, previous experiments were usually performed with several commercial devices on a single platform. Inadequate registration and synchronization among instruments often resulted in mismatch between spectral and 3D information of the same target. And narrow field of view (FOV) extends the working hours in farms. Therefore, we propose a high throughput prototype that combines stereo vision and grating dispersion to simultaneously acquire hyperspectral and 3D information.

Risk-informed Maintenance for Non-coherent Systems

NASA Astrophysics Data System (ADS)

Tao, Ye

Probabilistic Safety Assessment (PSA) is a systematic and comprehensive methodology to evaluate risks associated with a complex engineered technological entity. The information provided by PSA has been increasingly implemented for regulatory purposes but rarely used in providing information for operation and maintenance activities. As one of the key parts in PSA, Fault Tree Analysis (FTA) attempts to model and analyze failure processes of engineering and biological systems. The fault trees are composed of logic diagrams that display the state of the system and are constructed using graphical design techniques. Risk Importance Measures (RIMs) are information that can be obtained from both qualitative and quantitative aspects of FTA. Components within a system can be ranked with respect to each specific criterion defined by each RIM. Through a RIM, a ranking of the components or basic events can be obtained and provide valuable information for risk-informed decision making. Various RIMs have been applied in various applications. In order to provide a thorough understanding of RIMs and interpret the results, they are categorized with respect to risk significance (RS) and safety significance (SS) in this thesis. This has also tied them into different maintenance activities. When RIMs are used for maintenance purposes, it is called risk-informed maintenance. On the other hand, the majority of work produced on the FTA method has been concentrated on failure logic diagrams restricted to the direct or implied use of AND and OR operators. Such systems are considered as coherent systems. However, the NOT logic can also contribute to the information produced by PSA. The importance analysis of non-coherent systems is rather limited, even though the field has received more and more attention over the years. The non-coherent systems introduce difficulties in both qualitative and quantitative assessment of the fault tree compared with the coherent systems. In this thesis, a set of RIMs is analyzed and investigated. The 8 commonly used RIMs (Birnbaum's Measure, Criticality Importance Factor, Fussell-Vesely Measure, Improvement Potential, Conditional Probability, Risk Achievement, Risk Achievement Worth, and Risk Reduction Worth) are extended to non-coherent forms. Both coherent and non-coherent forms are classified into different categories in order to assist different types of maintenance activities. The real systems such as the Steam Generator Level Control System in CANDU Nuclear Power Plant (NPP), a Gas Detection System, and the Automatic Power Control System of the experimental nuclear reactor are presented to demonstrate the application of the results as case studies.

Photoplethysmographic imaging via spectrally demultiplexed erythema fluctuation analysis for remote heart rate monitoring

NASA Astrophysics Data System (ADS)

Deglint, Jason; Chung, Audrey G.; Chwyl, Brendan; Amelard, Robert; Kazemzadeh, Farnoud; Wang, Xiao Yu; Clausi, David A.; Wong, Alexander

2016-03-01

Traditional photoplethysmographic imaging (PPGI) systems use the red, green, and blue (RGB) broadband measurements of a consumer digital camera to remotely estimate a patients heart rate; however, these broadband RGB signals are often corrupted by ambient noise, making the extraction of subtle fluctuations indicative of heart rate difficult. Therefore, the use of narrow-band spectral measurements can significantly improve the accuracy. We propose a novel digital spectral demultiplexing (DSD) method to infer narrow-band spectral information from acquired broadband RGB measurements in order to estimate heart rate via the computation of motion- compensated skin erythema fluctuation. Using high-resolution video recordings of human participants, multiple measurement locations are automatically identified on the cheeks of an individual, and motion-compensated broadband reflectance measurements are acquired at each measurement location over time via measurement location tracking. The motion-compensated broadband reflectance measurements are spectrally demultiplexed using a non-linear inverse model based on the spectral sensitivity of the camera's detector. A PPG signal is then computed from the demultiplexed narrow-band spectral information via skin erythema fluctuation analysis, with improved signal-to-noise ratio allowing for reliable remote heart rate measurements. To assess the effectiveness of the proposed system, a set of experiments involving human motion in a front-facing position were performed under ambient lighting conditions. Experimental results indicate that the proposed system achieves robust and accurate heart rate measurements and can provide additional information about the participant beyond the capabilities of traditional PPGI methods.

Measuring Practicing Clinicians' Information Literacy. An Exploratory Analysis in the Context of Panel Management.

PubMed

Dixon, Brian E; Barboza, Katherine; Jensen, Ashley E; Bennett, Katelyn J; Sherman, Scott E; Schwartz, Mark D

2017-02-15

As healthcare moves towards technology-driven population health management, clinicians must adopt complex digital platforms to access health information and document care. This study explored information literacy, a set of skills required to effectively navigate population health information systems, among primary care providers in one Veterans' Affairs (VA) medical center. Information literacy was assessed during an 8-month randomized trial that tested a population health (panel) management intervention. Providers were asked about their use and comfort with two VA digital tools for panel management at baseline, 16 weeks, and post-intervention. An 8-item scale (range 0-40) was used to measure information literacy (Cronbach's α=0.84). Scores between study arms and provider types were compared using paired t-tests and ANOVAs. Associations between self-reported digital tool use and information literacy were measured via Pearson's correlations. Providers showed moderate levels of information literacy (M= 27.4, SD 6.5). There were no significant differences in mean information literacy between physicians (M=26.4, SD 6.7) and nurses (M=30.5, SD 5.2, p=0.57 for difference), or between intervention (M=28.4, SD 6.5) and control groups (M=25.1, SD 6.2, p=0.12 for difference). Information literacy was correlated with higher rates of self-reported information system usage (r=0.547, p=0.001). Clinicians identified data access, accuracy, and interpretability as potential information literacy barriers. While exploratory in nature, cautioning generalizability, the study suggests that measuring and improving clinicians' information literacy may play a significant role in the implementation and use of digital information tools, as these tools are rapidly being deployed to enhance communication among care teams, improve health care outcomes, and reduce overall costs.

Measuring Practicing Clinicians’ Information Literacy

PubMed Central

Barboza, Katherine; Jensen, Ashley E.; Bennett, Katelyn J.; Sherman, Scott E.; Schwartz, Mark D.

2017-01-01

Summary Background As healthcare moves towards technology-driven population health management, clinicians must adopt complex digital platforms to access health information and document care. Objectives This study explored information literacy, a set of skills required to effectively navigate population health information systems, among primary care providers in one Veterans’ Affairs (VA) medical center. Methods Information literacy was assessed during an 8-month randomized trial that tested a population health (panel) management intervention. Providers were asked about their use and comfort with two VA digital tools for panel management at baseline, 16 weeks, and post-intervention. An 8-item scale (range 0-40) was used to measure information literacy (Cronbach’s a=0.84). Scores between study arms and provider types were compared using paired t-tests and ANOVAs. Associations between self-reported digital tool use and information literacy were measured via Pearson’s correlations. Results Providers showed moderate levels of information literacy (M= 27.4, SD 6.5). There were no significant differences in mean information literacy between physicians (M=26.4, SD 6.7) and nurses (M=30.5, SD 5.2, p=0.57 for difference), or between intervention (M=28.4, SD 6.5) and control groups (M=25.1, SD 6.2, p=0.12 for difference). Information literacy was correlated with higher rates of self-reported information system usage (r=0.547, p=0.001). Clinicians identified data access, accuracy, and interpretability as potential information literacy barriers. Conclusions While exploratory in nature, cautioning generalizability, the study suggests that measuring and improving clinicians’ information literacy may play a significant role in the implementation and use of digital information tools, as these tools are rapidly being deployed to enhance communication among care teams, improve health care outcomes, and reduce overall costs. PMID:28197620

A robust approach for a filter-based monocular simultaneous localization and mapping (SLAM) system.

PubMed

Munguía, Rodrigo; Castillo-Toledo, Bernardino; Grau, Antoni

2013-07-03

Simultaneous localization and mapping (SLAM) is an important problem to solve in robotics theory in order to build truly autonomous mobile robots. This work presents a novel method for implementing a SLAM system based on a single camera sensor. The SLAM with a single camera, or monocular SLAM, is probably one of the most complex SLAM variants. In this case, a single camera, which is freely moving through its environment, represents the sole sensor input to the system. The sensors have a large impact on the algorithm used for SLAM. Cameras are used more frequently, because they provide a lot of information and are well adapted for embedded systems: they are light, cheap and power-saving. Nevertheless, and unlike range sensors, which provide range and angular information, a camera is a projective sensor providing only angular measurements of image features. Therefore, depth information (range) cannot be obtained in a single step. In this case, special techniques for feature system-initialization are needed in order to enable the use of angular sensors (as cameras) in SLAM systems. The main contribution of this work is to present a novel and robust scheme for incorporating and measuring visual features in filtering-based monocular SLAM systems. The proposed method is based in a two-step technique, which is intended to exploit all the information available in angular measurements. Unlike previous schemes, the values of parameters used by the initialization technique are derived directly from the sensor characteristics, thus simplifying the tuning of the system. The experimental results show that the proposed method surpasses the performance of previous schemes.

Weak Measurement and Quantum Smoothing of a Superconducting Qubit

NASA Astrophysics Data System (ADS)

Tan, Dian

In quantum mechanics, the measurement outcome of an observable in a quantum system is intrinsically random, yielding a probability distribution. The state of the quantum system can be described by a density matrix rho(t), which depends on the information accumulated until time t, and represents our knowledge about the system. The density matrix rho(t) gives probabilities for the outcomes of measurements at time t. Further probing of the quantum system allows us to refine our prediction in hindsight. In this thesis, we experimentally examine a quantum smoothing theory in a superconducting qubit by introducing an auxiliary matrix E(t) which is conditioned on information obtained from time t to a final time T. With the complete information before and after time t, the pair of matrices [rho(t), E(t)] can be used to make smoothed predictions for the measurement outcome at time t. We apply the quantum smoothing theory in the case of continuous weak measurement unveiling the retrodicted quantum trajectories and weak values. In the case of strong projective measurement, while the density matrix rho(t) with only diagonal elements in a given basis |n〉 may be treated as a classical mixture, we demonstrate a failure of this classical mixture description in determining the smoothed probabilities for the measurement outcome at time t with both diagonal rho(t) and diagonal E(t). We study the correlations between quantum states and weak measurement signals and examine aspects of the time symmetry of continuous quantum measurement. We also extend our study of quantum smoothing theory to the case of resonance fluorescence of a superconducting qubit with homodyne measurement and observe some interesting effects such as the modification of the excited state probabilities, weak values, and evolution of the predicted and retrodicted trajectories.

Freeway performance measurement system : an operational analysis tool

DOT National Transportation Integrated Search

2001-07-30

PeMS is a freeway performance measurement system for all of California. It processes 2 : GB/day of 30-second loop detector data in real time to produce useful information. Managers : at any time can have a uniform, and comprehensive assessment of fre...

Improving University Ranking to Achieve University Competitiveness by Management Information System

NASA Astrophysics Data System (ADS)

Dachyar, M.; Dewi, F.

2015-05-01

One way to increase university competitiveness is through information system management. A literature review was done to find information system factors that affect university performance in Quacquarelli Symonds (QS) University Ranking: Asia evaluation. Information system factors were then eliminated using Delphi method through consensus of 7 experts. Result from Delphi method was used as measured variables in PLS-SEM. Estimation with PLS-SEM method through 72 respondents shows that the latent variable academic reputation and citation per paper have significant correlation to university competitiveness. In University of Indonesia (UI) the priority to increase university competitiveness as follow: (i) network building in international conference, (ii) availability of research data to public, (iii) international conference information, (iv) information on achievements and accreditations of each major, (v) ease of employment for alumni.

Public Trust in Health Information Sharing: A Measure of System Trust.

PubMed

Platt, Jodyn E; Jacobson, Peter D; Kardia, Sharon L R

2018-04-01

To measure public trust in a health information sharing in a broadly defined health system (system trust), inclusive of health care, public health, and research; to identify individual characteristics that predict system trust; and to consider these findings in the context of national health initiatives (e.g., learning health systems and precision medicine) that will expand the scope of data sharing. Survey data (n = 1,011) were collected in February 2014. We constructed a composite index of four dimensions of system trust-competency, fidelity, integrity, and trustworthiness. The index was used in linear regression evaluating demographic and psychosocial predictors of system trust. Data were collected by GfK Custom using a nationally representative sample and analyzed in Stata 13.0. Our findings suggest the public's trust may not meet the needs of health systems as they enter an era of expanded data sharing. We found that a majority of the U.S. public does not trust the organizations that have health information and share it (i.e., the health system) in one or more dimensions. Together, demographic and psychosocial factors accounted for ~18 percent of the observed variability in system trust. Future research should consider additional predictors of system trust such as knowledge, attitudes, and beliefs to inform policies and practices for health data sharing. © Health Research and Educational Trust.

In vivo measurement of hemodynamic information in stenosed rat blood vessels using X-ray PIV

NASA Astrophysics Data System (ADS)

Park, Hanwook; Park, Jun Hong; Lee, Sang Joon

2016-11-01

Measurements of the hemodynamic information of blood flows, especially wall shear stress (WSS), in animal models with circulatory vascular diseases (CVDs) are important to understand the pathological mechanism of CVDs. In this study, X-ray particle image velocimetry (PIV) with high spatial resolution was applied to obtain velocity field information in stenosed blood vessels with high WSS. 3D clips fabricated with a 3D printer were applied to the abdominal aorta of a rat cadaver to induce artificial stenosis in the real blood vessel of an animal model. The velocity and WSS information of blood flows in the stenosed vessel were obtained and compared at various stenosis severities. In vivo measurement was also conducted by fastening a stenotic clip on a live rat model through surgical intervention to reduce the flow rate to match the limited temporal resolution of the present X-ray PIV system. Further improvement of the temporal resolution of the system might be able to provide in vivo measurements of hemodynamic information from animal disease models under physiological conditions. The present results would be helpful for understanding the relation between hemodynamic characteristics and the pathological mechanism in animal CVD models.

Information Content and Sensitivity of the 3β+2α Lidar Measurement System for Microphysical Retrievals

NASA Astrophysics Data System (ADS)

Burton, S. P.; Liu, X.; Chemyakin, E.; Hostetler, C. A.; Stamnes, S.; Moore, R.; Sawamura, P.; Ferrare, R. A.; Knobelspiesse, K. D.

2015-12-01

There is considerable interest in retrieving aerosol effective radius, number concentration and refractive index from lidar measurements of extinction and backscatter at several wavelengths. The 3 backscatter + 2 extinction (3β+2α) combination is particularly important since the planned NASA Aerosol-Clouds-Ecosystem (ACE) mission recommends this combination of measurements. The 2nd-generation NASA Langley airborne High Spectral Resolution Lidar (HSRL-2) has been making 3β+2α measurements since 2012. Here we develop a deeper understanding of the information content and sensitivities of the 3β+2α system in terms of aerosol microphysical parameters of interest. We determine best case results using a retrieval-free methodology. We calculate information content and uncertainty metrics from Optimal Estimation techniques using only a simplified forward model look-up table, with no explicit inversion. Simplifications include spherical particles, mono-modal log-normal size distributions, and wavelength-independent refractive indices. Since we only use the forward model with no retrieval, our results are applicable as a best case for all existing retrievals. Retrieval-dependent errors due to mismatch between the assumptions and true atmospheric aerosols are not included. The sensitivity metrics allow for identifying (1) information content of the measurements versus a priori information; (2) best-case error bars on the retrieved parameters; and (3) potential sources of cross-talk or "compensating" errors wherein different retrieval parameters are not independently captured by the measurements. These results suggest that even in the best case, this retrieval system is underdetermined. Recommendations are given for addressing cross-talk between effective radius and number concentration. A potential solution to the under-determination problem is a combined active (lidar) and passive (polarimeter) retrieval, which is the subject of a new funded NASA project by our team.

Where should Momma go? Current nursing home performance measurement strategies and a less ambitious approach.

PubMed

Phillips, Charles D; Hawes, Catherine; Lieberman, Trudy; Koren, Mary Jane

2007-06-25

Nursing home performance measurement systems are practically ubiquitous. The vast majority of these systems aspire to rank order all nursing homes based on quantitative measures of quality. However, the ability of such systems to identify homes differing in quality is hampered by the multidimensional nature of nursing homes and their residents. As a result, the authors doubt the ability of many nursing home performance systems to truly help consumers differentiate among homes providing different levels of quality. We also argue that, for consumers, performance measurement models are better at identifying problem facilities than potentially good homes. In response to these concerns we present a proposal for a less ambitious approach to nursing home performance measurement than previously used. We believe consumers can make better informed choice using a simpler system designed to pinpoint poor-quality nursing homes, rather than one designed to rank hundreds of facilities based on differences in quality-of-care indicators that are of questionable importance. The suggested performance model is based on five principles used in the development of the Consumers Union 2006 Nursing Home Quality Monitor. We can best serve policy-makers and consumers by eschewing nursing home reporting systems that present information about all the facilities in a city, a state, or the nation on a website or in a report. We argue for greater modesty in our efforts and a focus on identifying only the potentially poorest or best homes. In the end, however, it is important to remember that information from any performance measurement website or report is no substitute for multiple visits to a home at different times of the day to personally assess quality.

40 CFR 57.402 - Elements of the supplementary control system.

Code of Federal Regulations, 2013 CFR

2013-07-01

... capable of routine real time measurement of maximum expected SO2 concentrations for the averaging times of... emission curtailment decisions based on the use of real time information from the air quality monitoring... meteorological information necessary to operate the system; (iv) The ambient concentrations and meteorological...

40 CFR 57.402 - Elements of the supplementary control system.

Code of Federal Regulations, 2011 CFR

2011-07-01

... capable of routine real time measurement of maximum expected SO2 concentrations for the averaging times of... emission curtailment decisions based on the use of real time information from the air quality monitoring... meteorological information necessary to operate the system; (iv) The ambient concentrations and meteorological...

40 CFR 57.402 - Elements of the supplementary control system.

Code of Federal Regulations, 2012 CFR

2012-07-01

... capable of routine real time measurement of maximum expected SO2 concentrations for the averaging times of... emission curtailment decisions based on the use of real time information from the air quality monitoring... meteorological information necessary to operate the system; (iv) The ambient concentrations and meteorological...

40 CFR 57.402 - Elements of the supplementary control system.

Code of Federal Regulations, 2014 CFR

2014-07-01

... capable of routine real time measurement of maximum expected SO2 concentrations for the averaging times of... emission curtailment decisions based on the use of real time information from the air quality monitoring... meteorological information necessary to operate the system; (iv) The ambient concentrations and meteorological...

Conceptualization and Exploration of Composite Career Anchors: An Analysis of Information Systems Personnel.

ERIC Educational Resources Information Center

Ramakrishna, Hindupur V.; Potosky, Denise

2003-01-01

Information systems professionals (n=163) completed measures of career anchors and outcomes (career/job satisfaction, job performance, perceived advancement prospects); 46% had multiple dominant anchors and these individuals did not have significantly different career outcomes than those with single dominant anchors. (Contains 26 references.) (SK)

40 CFR 57.402 - Elements of the supplementary control system.

Code of Federal Regulations, 2010 CFR

2010-07-01

... capable of routine real time measurement of maximum expected SO2 concentrations for the averaging times of... emission curtailment decisions based on the use of real time information from the air quality monitoring... meteorological information necessary to operate the system; (iv) The ambient concentrations and meteorological...

The ALL-OUT Library; A Design for Computer-Powered, Multidimensional Services.

ERIC Educational Resources Information Center

Sleeth, Jim; LaRue, James

1983-01-01

Preliminary description of design of electronic library and home information delivery system highlights potentials of personal computer interface program (applying for service, assuring that users are valid, checking for measures, searching, locating titles) and incorporation of concepts used in other information systems (security checks,…

[Metrological analysis of measuring systems in testing an anticipatory reaction to the position of a moving object].

PubMed

Aksiuta, E F; Ostashev, A V; Sergeev, E V; Aksiuta, V E

1997-01-01

The methods of the information (entropy) error theory were used to make a metrological analysis of the well-known commercial measuring systems for timing an anticipative reaction (AR) to the position of a moving object, which is based on the electromechanical, gas-discharge, and electron principles. The required accuracy of measurement was ascertained to be achieved only by using the systems based on the electron principle of moving object simulation and AR measurement.

Study of a monogamous entanglement measure for three-qubit quantum systems

NASA Astrophysics Data System (ADS)

Li, Qiting; Cui, Jianlian; Wang, Shuhao; Long, Gui-Lu

2016-06-01

The entanglement quantification and classification of multipartite quantum states is an important research area in quantum information. In this paper, in terms of the reduced density matrices corresponding to all possible partitions of the entire system, a bounded entanglement measure is constructed for arbitrary-dimensional multipartite quantum states. In particular, for three-qubit quantum systems, we prove that our entanglement measure satisfies the relation of monogamy. Furthermore, we present a necessary condition for characterizing maximally entangled states using our entanglement measure.

Optimal Correlations in Many-Body Quantum Systems

NASA Astrophysics Data System (ADS)

Amico, L.; Rossini, D.; Hamma, A.; Korepin, V. E.

2012-06-01

Information and correlations in a quantum system are closely related through the process of measurement. We explore such relation in a many-body quantum setting, effectively bridging between quantum metrology and condensed matter physics. To this aim we adopt the information-theory view of correlations and study the amount of correlations after certain classes of positive-operator-valued measurements are locally performed. As many-body systems, we consider a one-dimensional array of interacting two-level systems (a spin chain) at zero temperature, where quantum effects are most pronounced. We demonstrate how the optimal strategy to extract the correlations depends on the quantum phase through a subtle interplay between local interactions and coherence.

PASTE: patient-centered SMS text tagging in a medication management system

PubMed Central

Johnson, Kevin B; Denny, Joshua C

2011-01-01

Objective To evaluate the performance of a system that extracts medication information and administration-related actions from patient short message service (SMS) messages. Design Mobile technologies provide a platform for electronic patient-centered medication management. MyMediHealth (MMH) is a medication management system that includes a medication scheduler, a medication administration record, and a reminder engine that sends text messages to cell phones. The object of this work was to extend MMH to allow two-way interaction using mobile phone-based SMS technology. Unprompted text-message communication with patients using natural language could engage patients in their healthcare, but presents unique natural language processing challenges. The authors developed a new functional component of MMH, the Patient-centered Automated SMS Tagging Engine (PASTE). The PASTE web service uses natural language processing methods, custom lexicons, and existing knowledge sources to extract and tag medication information from patient text messages. Measurements A pilot evaluation of PASTE was completed using 130 medication messages anonymously submitted by 16 volunteers via a website. System output was compared with manually tagged messages. Results Verified medication names, medication terms, and action terms reached high F-measures of 91.3%, 94.7%, and 90.4%, respectively. The overall medication name F-measure was 79.8%, and the medication action term F-measure was 90%. Conclusion Other studies have demonstrated systems that successfully extract medication information from clinical documents using semantic tagging, regular expression-based approaches, or a combination of both approaches. This evaluation demonstrates the feasibility of extracting medication information from patient-generated medication messages. PMID:21984605

Development of a wireless displacement measurement system using acceleration responses.

PubMed

Park, Jong-Woong; Sim, Sung-Han; Jung, Hyung-Jo; Spencer, Billie F

2013-07-01

Displacement measurements are useful information for various engineering applications such as structural health monitoring (SHM), earthquake engineering and system identification. Most existing displacement measurement methods are costly, labor-intensive, and have difficulties particularly when applying to full-scale civil structures because the methods require stationary reference points. Indirect estimation methods converting acceleration to displacement can be a good alternative as acceleration transducers are generally cost-effective, easy to install, and have low noise. However, the application of acceleration-based methods to full-scale civil structures such as long span bridges is challenging due to the need to install cables to connect the sensors to a base station. This article proposes a low-cost wireless displacement measurement system using acceleration. Developed with smart sensors that are low-cost, wireless, and capable of on-board computation, the wireless displacement measurement system has significant potential to impact many applications that need displacement information at multiple locations of a structure. The system implements an FIR-filter type displacement estimation algorithm that can remove low frequency drifts typically caused by numerical integration of discrete acceleration signals. To verify the accuracy and feasibility of the proposed system, laboratory tests are carried out using a shaking table and on a three storey shear building model, experimentally confirming the effectiveness of the proposed system.

Development of a Wireless Displacement Measurement System Using Acceleration Responses

PubMed Central

Park, Jong-Woong; Sim, Sung-Han; Jung, Hyung-Jo; Spencer, Billie F.

2013-01-01

Displacement measurements are useful information for various engineering applications such as structural health monitoring (SHM), earthquake engineering and system identification. Most existing displacement measurement methods are costly, labor-intensive, and have difficulties particularly when applying to full-scale civil structures because the methods require stationary reference points. Indirect estimation methods converting acceleration to displacement can be a good alternative as acceleration transducers are generally cost-effective, easy to install, and have low noise. However, the application of acceleration-based methods to full-scale civil structures such as long span bridges is challenging due to the need to install cables to connect the sensors to a base station. This article proposes a low-cost wireless displacement measurement system using acceleration. Developed with smart sensors that are low-cost, wireless, and capable of on-board computation, the wireless displacement measurement system has significant potential to impact many applications that need displacement information at multiple locations of a structure. The system implements an FIR-filter type displacement estimation algorithm that can remove low frequency drifts typically caused by numerical integration of discrete acceleration signals. To verify the accuracy and feasibility of the proposed system, laboratory tests are carried out using a shaking table and on a three storey shear building model, experimentally confirming the effectiveness of the proposed system. PMID:23881123

Zero-gyro control of the International Ultraviolet Explorer

NASA Technical Reports Server (NTRS)

O'Donnell, James R., Jr.; Hoffman, Henry C.

1993-01-01

The IUE was built for an anticipated lifespan of three years with a goal of five. It has been operating for over 15 years, even though it has had only two working gyros since August 17, 1985, through the use of a two-gyro attitude control system that uses information from IUE's fine sun sensor (FSS) and the two remaining gyros to provide three-axis control. A one-gyro control system that uses an additional axis of information from the FSS has been developed and tested on-orbit. The purpose of this paper is to discuss the work in progress towards the development of a zero-gyro control law for IUE. Motion about the sunline, which cannot be measured by the FSS, is measured and controlled in the zero-gyro system by applying a momentum bias perpendicular to the sunline and measuring the transfer of this momentum between the spacecraft reaction wheels, while the spacecraft is held in the other two axes using position and derived-rate information from the FSS.

Imperfection and Thickness Measurement of Panels Using a Coordinate Measurement Machine

NASA Technical Reports Server (NTRS)

Thornburgh, Robert P.

2006-01-01

This paper summarizes the methodology used to measure imperfection and thickness variation for flat and curved panels using a Coordinate Measurement Machine (CMM) and the software program MeasPanel. The objective is to provide a reference document so that someone with a basic understanding of CMM operation can measure a panel with minimal training. Detailed information about both the measurement system setup and computer software is provided. Information is also provided about the format of the raw data, as well as how it is post-processed for use in finite-element analysis.

Unifying three perspectives on information processing in stochastic thermodynamics.

PubMed

Barato, A C; Seifert, U

2014-03-07

So far, feedback-driven systems have been discussed using (i) measurement and control, (ii) a tape interacting with a system, or (iii) by identifying an implicit Maxwell demon in steady-state transport. We derive the corresponding second laws from one master fluctuation theorem and discuss their relationship. In particular, we show that both the entropy production involving mutual information between system and controller and the one involving a Shannon entropy difference of an information reservoir like a tape carry an extra term different from the usual current times affinity. We, thus, generalize stochastic thermodynamics to the presence of an information reservoir.

Informatics applied to cytology

PubMed Central

Hornish, Maryanne; Goulart, Robert A.

2008-01-01

Automation and emerging information technologies are being adopted by cytology laboratories to augment Pap test screening and improve diagnostic accuracy. As a result, informatics, the application of computers and information systems to information management, has become essential for the successful operation of the cytopathology laboratory. This review describes how laboratory information management systems can be used to achieve an automated and seamless workflow process. The utilization of software, electronic databases and spreadsheets to perform necessary quality control measures are discussed, as well as a Lean production system and Six Sigma approach, to reduce errors in the cytopathology laboratory. PMID:19495402

Method for suppressing noise in measurements

NASA Technical Reports Server (NTRS)

Carson, Paul L. (Inventor); Madsen, Louis A. (Inventor); Leskowitz, Garett M. (Inventor); Weitekamp, Daniel P. (Inventor)

2000-01-01

Methods for suppressing noise in measurements by correlating functions based on at least two different measurements of a system at two different times. In one embodiment, a measurement operation is performed on at least a portion of a system that has a memory. A property of the system is measured during a first measurement period to produce a first response indicative of a first state of the system. Then the property of the system is measured during a second measurement period to produce a second response indicative of a second state of the system. The second measurement is performed after an evolution duration subsequent to the first measurement period when the system still retains a degree of memory of an aspect of the first state. Next, a first function of the first response is combined with a second function of the second response to form a second-order correlation function. Information of the system is then extracted from the second-order correlation function.

Healthcare information systems: data mining methods in the creation of a clinical recommender system

NASA Astrophysics Data System (ADS)

Duan, L.; Street, W. N.; Xu, E.

2011-05-01

Recommender systems have been extensively studied to present items, such as movies, music and books that are likely of interest to the user. Researchers have indicated that integrated medical information systems are becoming an essential part of the modern healthcare systems. Such systems have evolved to an integrated enterprise-wide system. In particular, such systems are considered as a type of enterprise information systems or ERP system addressing healthcare industry sector needs. As part of efforts, nursing care plan recommender systems can provide clinical decision support, nursing education, clinical quality control, and serve as a complement to existing practice guidelines. We propose to use correlations among nursing diagnoses, outcomes and interventions to create a recommender system for constructing nursing care plans. In the current study, we used nursing diagnosis data to develop the methodology. Our system utilises a prefix-tree structure common in itemset mining to construct a ranked list of suggested care plan items based on previously-entered items. Unlike common commercial systems, our system makes sequential recommendations based on user interaction, modifying a ranked list of suggested items at each step in care plan construction. We rank items based on traditional association-rule measures such as support and confidence, as well as a novel measure that anticipates which selections might improve the quality of future rankings. Since the multi-step nature of our recommendations presents problems for traditional evaluation measures, we also present a new evaluation method based on average ranking position and use it to test the effectiveness of different recommendation strategies.

75 FR 21603 - Information Collection; Submission for OMB Review, Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-26

... information collection request (ICR), entitled the Pilot for Volunteer Management ROI Measurement System, to... in this Federal Register: (1) By fax to: (202) 395-6974, Attention: Ms. Sharon Mar, OMB Desk Officer... approval of a pilot version of a tool designed to measure the return on investment for recruiting and...

Perceptions of risk, risk aversion, and barriers to adoption of decision support systems and integrated pest management: an introduction.

PubMed

Gent, David H; De Wolf, Erick; Pethybridge, Sarah J

2011-06-01

Rational management of plant diseases, both economically and environmentally, involves assessing risks and the costs associated with both correct and incorrect tactical management decisions to determine when control measures are warranted. Decision support systems can help to inform users of plant disease risk and thus assist in accurately targeting events critical for management. However, in many instances adoption of these systems for use in routine disease management has been perceived as slow. The under-utilization of some decision support systems is likely due to both technical and perception constraints that have not been addressed adequately during development and implementation phases. Growers' perceptions of risk and their aversion to these perceived risks can be reasons for the "slow" uptake of decision support systems and, more broadly, integrated pest management (IPM). Decision theory provides some tools that may assist in quantifying and incorporating subjective and/or measured probabilities of disease occurrence or crop loss into decision support systems. Incorporation of subjective probabilities into IPM recommendations may be one means to reduce grower uncertainty and improve trust of these systems because management recommendations could be explicitly informed by growers' perceptions of risk and economic utility. Ultimately though, we suggest that an appropriate measure of the value and impact of decision support systems is grower education that enables more skillful and informed management decisions independent of consultation of the support tool outputs.

Nonintrusive biosignal measurement system in a vehicle.

PubMed

Lee, Haet Bit; Choi, Jong Min; Kim, Jung Soo; Kim, Yun Seong; Baek, Hyun Jae; Ryu, Myung Suk; Sohn, Ryang Hee; Park, Kwang Suk

2007-01-01

Measurement of driver's state is important in both daily healthcare and prevention of car accidents. Existing measurement methods, however, are too complex and uncomfortable to measure for everyday. A nonintrusive biosignal monitoring system is demanded for increasing the accessibility. In this paper, we proposed a nonintrusive measurement system integrated in a vehicle for recording electrocardiographic (ECG) signals and tested the performance of the system. The system consists of dry electrodes attached to the steering wheel and a wireless communication module using a Bluetooth device. ECG signals measured by our system were compared with those by a conventional system employing wet electrodes during real city road driving. Various parameters used for HRV analysis in time and frequency domain showed no significant differences between the two simultaneously measured ECG signals. The result implies the possibility that developed system could have a potential to monitor health information in a vehicle instead of commercial equipments.

Information theoretic comparisons of original and transformed data from Landsat MSS and TM

NASA Technical Reports Server (NTRS)

Malila, W. A.

1985-01-01

The dispersion and concentration of signal values in transformed data from the Landsat-4 MSS and TM instruments are analyzed using a communications theory approach. The definition of entropy of Shannon was used to quantify information, and the concept of mutual information was employed to develop a measure of information contained in several subsets of variables. Several comparisons of information content are made on the basis of the information content measure, including: system design capacities; data volume occupied by agricultural data; and the information content of original bands and Tasseled Cap variables. A method for analyzing noise effects in MSS and TM data is proposed.

A New Polar Transfer Alignment Algorithm with the Aid of a Star Sensor and Based on an Adaptive Unscented Kalman Filter.

PubMed

Cheng, Jianhua; Wang, Tongda; Wang, Lu; Wang, Zhenmin

2017-10-23

Because of the harsh polar environment, the master strapdown inertial navigation system (SINS) has low accuracy and the system model information becomes abnormal. In this case, existing polar transfer alignment (TA) algorithms which use the measurement information provided by master SINS would lose their effectiveness. In this paper, a new polar TA algorithm with the aid of a star sensor and based on an adaptive unscented Kalman filter (AUKF) is proposed to deal with the problems. Since the measurement information provided by master SINS is inaccurate, the accurate information provided by the star sensor is chosen as the measurement. With the compensation of lever-arm effect and the model of star sensor, the nonlinear navigation equations are derived. Combined with the attitude matching method, the filter models for polar TA are designed. An AUKF is introduced to solve the abnormal information of system model. Then, the AUKF is used to estimate the states of TA. Results have demonstrated that the performance of the new polar TA algorithm is better than the state-of-the-art polar TA algorithms. Therefore, the new polar TA algorithm proposed in this paper is effectively to ensure and improve the accuracy of TA in the harsh polar environment.

A New Polar Transfer Alignment Algorithm with the Aid of a Star Sensor and Based on an Adaptive Unscented Kalman Filter

PubMed Central

Cheng, Jianhua; Wang, Tongda; Wang, Lu; Wang, Zhenmin

2017-01-01

Because of the harsh polar environment, the master strapdown inertial navigation system (SINS) has low accuracy and the system model information becomes abnormal. In this case, existing polar transfer alignment (TA) algorithms which use the measurement information provided by master SINS would lose their effectiveness. In this paper, a new polar TA algorithm with the aid of a star sensor and based on an adaptive unscented Kalman filter (AUKF) is proposed to deal with the problems. Since the measurement information provided by master SINS is inaccurate, the accurate information provided by the star sensor is chosen as the measurement. With the compensation of lever-arm effect and the model of star sensor, the nonlinear navigation equations are derived. Combined with the attitude matching method, the filter models for polar TA are designed. An AUKF is introduced to solve the abnormal information of system model. Then, the AUKF is used to estimate the states of TA. Results have demonstrated that the performance of the new polar TA algorithm is better than the state-of-the-art polar TA algorithms. Therefore, the new polar TA algorithm proposed in this paper is effectively to ensure and improve the accuracy of TA in the harsh polar environment. PMID:29065521

High performance optical encryption based on computational ghost imaging with QR code and compressive sensing technique

NASA Astrophysics Data System (ADS)

Zhao, Shengmei; Wang, Le; Liang, Wenqiang; Cheng, Weiwen; Gong, Longyan

2015-10-01

In this paper, we propose a high performance optical encryption (OE) scheme based on computational ghost imaging (GI) with QR code and compressive sensing (CS) technique, named QR-CGI-OE scheme. N random phase screens, generated by Alice, is a secret key and be shared with its authorized user, Bob. The information is first encoded by Alice with QR code, and the QR-coded image is then encrypted with the aid of computational ghost imaging optical system. Here, measurement results from the GI optical system's bucket detector are the encrypted information and be transmitted to Bob. With the key, Bob decrypts the encrypted information to obtain the QR-coded image with GI and CS techniques, and further recovers the information by QR decoding. The experimental and numerical simulated results show that the authorized users can recover completely the original image, whereas the eavesdroppers can not acquire any information about the image even the eavesdropping ratio (ER) is up to 60% at the given measurement times. For the proposed scheme, the number of bits sent from Alice to Bob are reduced considerably and the robustness is enhanced significantly. Meantime, the measurement times in GI system is reduced and the quality of the reconstructed QR-coded image is improved.

Autonomous GPS/INS navigation experiment for Space Transfer Vehicle

NASA Technical Reports Server (NTRS)

Upadhyay, Triveni N.; Cotterill, Stephen; Deaton, A. W.

1993-01-01

An experiment to validate the concept of developing an autonomous integrated spacecraft navigation system using on board Global Positioning System (GPS) and Inertial Navigation System (INS) measurements is described. The feasibility of integrating GPS measurements with INS measurements to provide a total improvement in spacecraft navigation performance, i.e. improvement in position, velocity and attitude information, was previously demonstrated. An important aspect of this research is the automatic real time reconfiguration capability of the system designed to respond to changes in a spacecraft mission under the control of an expert system.

Autonomous GPS/INS navigation experiment for Space Transfer Vehicle (STV)

NASA Technical Reports Server (NTRS)

Upadhyay, Triveni N.; Cotterill, Stephen; Deaton, A. Wayne

1991-01-01

An experiment to validate the concept of developing an autonomous integrated spacecraft navigation system using on board Global Positioning System (GPS) and Inertial Navigation System (INS) measurements is described. The feasibility of integrating GPS measurements with INS measurements to provide a total improvement in spacecraft navigation performance, i.e. improvement in position, velocity and attitude information, was previously demonstrated. An important aspect of this research is the automatic real time reconfiguration capability of the system designed to respond to changes in a spacecraft mission under the control of an expert system.

Autonomous GPS/INS navigation experiment for Space Transfer Vehicle

NASA Astrophysics Data System (ADS)

Upadhyay, Triveni N.; Cotterill, Stephen; Deaton, A. W.

1993-07-01

An experiment to validate the concept of developing an autonomous integrated spacecraft navigation system using on board Global Positioning System (GPS) and Inertial Navigation System (INS) measurements is described. The feasibility of integrating GPS measurements with INS measurements to provide a total improvement in spacecraft navigation performance, i.e. improvement in position, velocity and attitude information, was previously demonstrated. An important aspect of this research is the automatic real time reconfiguration capability of the system designed to respond to changes in a spacecraft mission under the control of an expert system.

Minimal sufficient positive-operator valued measure on a separable Hilbert space

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuramochi, Yui, E-mail: kuramochi.yui.22c@st.kyoto-u.ac.jp

We introduce a concept of a minimal sufficient positive-operator valued measure (POVM), which is the least redundant POVM among the POVMs that have the equivalent information about the measured quantum system. Assuming the system Hilbert space to be separable, we show that for a given POVM, a sufficient statistic called a Lehmann-Scheffé-Bahadur statistic induces a minimal sufficient POVM. We also show that every POVM has an equivalent minimal sufficient POVM and that such a minimal sufficient POVM is unique up to relabeling neglecting null sets. We apply these results to discrete POVMs and information conservation conditions proposed by the author.

DOD Acquisition Information Management

DTIC Science & Technology

1994-09-30

instead of on a real- time management information flow. The process of identifying risks and implementing corrective actions is lengthened by using the current system; performance measurement and reporting are impeded.

An Informative Interpretation of Decision Theory: The Information Theoretic Basis for Signal-to-Noise Ratio and Log Likelihood Ratio

DOE PAGES

Polcari, J.

2013-08-16

The signal processing concept of signal-to-noise ratio (SNR), in its role as a performance measure, is recast within the more general context of information theory, leading to a series of useful insights. Establishing generalized SNR (GSNR) as a rigorous information theoretic measure inherent in any set of observations significantly strengthens its quantitative performance pedigree while simultaneously providing a specific definition under general conditions. This directly leads to consideration of the log likelihood ratio (LLR): first, as the simplest possible information-preserving transformation (i.e., signal processing algorithm) and subsequently, as an absolute, comparable measure of information for any specific observation exemplar. Furthermore,more » the information accounting methodology that results permits practical use of both GSNR and LLR as diagnostic scalar performance measurements, directly comparable across alternative system/algorithm designs, applicable at any tap point within any processing string, in a form that is also comparable with the inherent performance bounds due to information conservation.« less

Measurement Scales and Standard Systems in Psychology.

ERIC Educational Resources Information Center

Aftanas, Marion S.

Most discussions of measurement theory are focused on "scales" of measurement, but it is not clear whether reference is made to the mechanisms of measurement or the metric information derived from measurement. This emphasis on scales in measurement theory has not always provided a meaningful or fruitful description of measurement activities in…

Diagnosis and Prognosis of Weapon Systems

NASA Technical Reports Server (NTRS)

Nolan, Mary; Catania, Rebecca; deMare, Gregory

2005-01-01

The Prognostics Framework is a set of software tools with an open architecture that affords a capability to integrate various prognostic software mechanisms and to provide information for operational and battlefield decision-making and logistical planning pertaining to weapon systems. The Prognostics NASA Tech Briefs, February 2005 17 Framework is also a system-level health -management software system that (1) receives data from performance- monitoring and built-in-test sensors and from other prognostic software and (2) processes the received data to derive a diagnosis and a prognosis for a weapon system. This software relates the diagnostic and prognostic information to the overall health of the system, to the ability of the system to perform specific missions, and to needed maintenance actions and maintenance resources. In the development of the Prognostics Framework, effort was focused primarily on extending previously developed model-based diagnostic-reasoning software to add prognostic reasoning capabilities, including capabilities to perform statistical analyses and to utilize information pertaining to deterioration of parts, failure modes, time sensitivity of measured values, mission criticality, historical data, and trends in measurement data. As thus extended, the software offers an overall health-monitoring capability.

Principles of disease management in neonatology.

PubMed

Bowen, F W; Gwiazdowski, S

1998-06-01

This article emphasizes the emerging facets of disease-management practice that impact directly on establishing a measured care system that can produce the information needed to establish a continuous quality improvement program. The areas discussed are risk assessment, clinical management guidelines and carepaths, and the measurement of system output known as clinical outcomes. The remainder of the article details the aspects of risk assessment, guideline function, and outcome assessment, critical in a disease-managed measured care system.

Implementation of safety driving system using e-health and telematics technology.

PubMed

Lee, Youngbum; Lee, Myoungho

2008-08-01

This research aimed to develop a safety driving system using e-health and telematics technology. Biosignal sensors were installed in an automobile to check the driver's health status with an automatic diagnosis system providing health information to the driver. Measured data were sent to the e-health center through a telematics device, and a medical doctor analyzed these data, sending diagnosis and prescription information to the driver. This system recognizes the driver's sleeping, drinking impairment, excitability, and fatigue using biosensors. The system initially provides alerts in the automobile. It also controls the driving environment in the car, searches for a highway service area using Global Positioning System (GPS), and provides additional information for safety driving. If a car accident has occurred, it makes an emergency call to the nearest hospital, emergency center, and insurance company. A conceptual and prototype model for an imbedded system is presented with initial data for driver condition. Such a system could prevent car accidents caused by drivers driving while intoxicated and falling asleep at the wheel using the driver's biosignals measured by biosensors. The system can provide various e-health services using a telematics system to enhance the technical compatibility of the automobile.

Information dynamics of brain-heart physiological networks during sleep

NASA Astrophysics Data System (ADS)

Faes, L.; Nollo, G.; Jurysta, F.; Marinazzo, D.

2014-10-01

This study proposes an integrated approach, framed in the emerging fields of network physiology and information dynamics, for the quantitative analysis of brain-heart interaction networks during sleep. With this approach, the time series of cardiac vagal autonomic activity and brain wave activities measured respectively as the normalized high frequency component of heart rate variability and the EEG power in the δ, θ, α, σ, and β bands, are considered as realizations of the stochastic processes describing the dynamics of the heart system and of different brain sub-systems. Entropy-based measures are exploited to quantify the predictive information carried by each (sub)system, and to dissect this information into a part actively stored in the system and a part transferred to it from the other connected systems. The application of this approach to polysomnographic recordings of ten healthy subjects led us to identify a structured network of sleep brain-brain and brain-heart interactions, with the node described by the β EEG power acting as a hub which conveys the largest amount of information flowing between the heart and brain nodes. This network was found to be sustained mostly by the transitions across different sleep stages, as the information transfer was weaker during specific stages than during the whole night, and vanished progressively when moving from light sleep to deep sleep and to REM sleep.

Constructing networks with correlation maximization methods.

PubMed

Mellor, Joseph C; Wu, Jie; Delisi, Charles

2004-01-01

Problems of inference in systems biology are ideally reduced to formulations which can efficiently represent the features of interest. In the case of predicting gene regulation and pathway networks, an important feature which describes connected genes and proteins is the relationship between active and inactive forms, i.e. between the "on" and "off" states of the components. While not optimal at the limits of resolution, these logical relationships between discrete states can often yield good approximations of the behavior in larger complex systems, where exact representation of measurement relationships may be intractable. We explore techniques for extracting binary state variables from measurement of gene expression, and go on to describe robust measures for statistical significance and information that can be applied to many such types of data. We show how statistical strength and information are equivalent criteria in limiting cases, and demonstrate the application of these measures to simple systems of gene regulation.

Optimum quantum receiver for detecting weak signals in PAM communication systems

NASA Astrophysics Data System (ADS)

Sharma, Navneet; Rawat, Tarun Kumar; Parthasarathy, Harish; Gautam, Kumar

2017-09-01

This paper deals with the modeling of an optimum quantum receiver for pulse amplitude modulator (PAM) communication systems. The information bearing sequence {I_k}_{k=0}^{N-1} is estimated using the maximum likelihood (ML) method. The ML method is based on quantum mechanical measurements of an observable X in the Hilbert space of the quantum system at discrete times, when the Hamiltonian of the system is perturbed by an operator obtained by modulating a potential V with a PAM signal derived from the information bearing sequence {I_k}_{k=0}^{N-1}. The measurement process at each time instant causes collapse of the system state to an observable eigenstate. All probabilities of getting different outcomes from an observable are calculated using the perturbed evolution operator combined with the collapse postulate. For given probability densities, calculation of the mean square error evaluates the performance of the receiver. Finally, we present an example involving estimating an information bearing sequence that modulates a quantum electromagnetic field incident on a quantum harmonic oscillator.

Asan medical information system for healthcare quality improvement.

PubMed

Ryu, Hyeon Jeong; Kim, Woo Sung; Lee, Jae Ho; Min, Sung Woo; Kim, Sun Ja; Lee, Yong Su; Lee, Young Ha; Nam, Sang Woo; Eo, Gi Seung; Seo, Sook Gyoung; Nam, Mi Hyun

2010-09-01

This purpose of this paper is to introduce the status of the Asan Medical Center (AMC) medical information system with respect to healthcare quality improvement. Asan Medical Information System (AMIS) is projected to become a completely electronic and digital information hospital. AMIS has played a role in improving the health care quality based on the following measures: safety, effectiveness, patient-centeredness, timeliness, efficiency, privacy, and security. AMIS CONSISTED OF SEVERAL DISTINCTIVE SYSTEMS: order communication system, electronic medical record, picture archiving communication system, clinical research information system, data warehouse, enterprise resource planning, IT service management system, and disaster recovery system. The most distinctive features of AMIS were the high alert-medication recognition & management system, the integrated and severity stratified alert system, the integrated patient monitoring system, the perioperative diabetic care monitoring and support system, and the clinical indicator management system. AMIS provides IT services for AMC, 7 affiliated hospitals and over 5,000 partners clinics, and was developed to improve healthcare services. The current challenge of AMIS is standard and interoperability. A global health IT strategy is needed to get through the current challenges and to provide new services as needed.

Unified framework for information integration based on information geometry

PubMed Central

Oizumi, Masafumi; Amari, Shun-ichi

2016-01-01

Assessment of causal influences is a ubiquitous and important subject across diverse research fields. Drawn from consciousness studies, integrated information is a measure that defines integration as the degree of causal influences among elements. Whereas pairwise causal influences between elements can be quantified with existing methods, quantifying multiple influences among many elements poses two major mathematical difficulties. First, overestimation occurs due to interdependence among influences if each influence is separately quantified in a part-based manner and then simply summed over. Second, it is difficult to isolate causal influences while avoiding noncausal confounding influences. To resolve these difficulties, we propose a theoretical framework based on information geometry for the quantification of multiple causal influences with a holistic approach. We derive a measure of integrated information, which is geometrically interpreted as the divergence between the actual probability distribution of a system and an approximated probability distribution where causal influences among elements are statistically disconnected. This framework provides intuitive geometric interpretations harmonizing various information theoretic measures in a unified manner, including mutual information, transfer entropy, stochastic interaction, and integrated information, each of which is characterized by how causal influences are disconnected. In addition to the mathematical assessment of consciousness, our framework should help to analyze causal relationships in complex systems in a complete and hierarchical manner. PMID:27930289

3D refractive index measurements of special optical fibers

NASA Astrophysics Data System (ADS)

Yan, Cheng; Huang, Su-Juan; Miao, Zhuang; Chang, Zheng; Zeng, Jun-Zhang; Wang, Ting-Yun

2016-09-01

A digital holographic microscopic chromatography-based approach with considerably improved accuracy, simplified configuration and performance stability is proposed to measure three dimensional refractive index of special optical fibers. Based on the approach, a measurement system is established incorporating a modified Mach-Zehnder interferometer and lab-developed supporting software for data processing. In the system, a phase projection distribution of an optical fiber is utilized to obtain an optimal digital hologram recorded by a CCD, and then an angular spectrum theory-based algorithm is adopted to extract the phase distribution information of an object wave. The rotation of the optic fiber enables the experimental measurements of multi-angle phase information. Based on the filtered back projection algorithm, a 3D refraction index of the optical fiber is thus obtained at high accuracy. To evaluate the proposed approach, both PANDA fibers and special elliptical optical fiber are considered in the system. The results measured in PANDA fibers agree well with those measured using S14 Refractive Index Profiler, which is, however, not suitable for measuring the property of a special elliptical fiber.

Development of a belt-type wearable sensor system with multi-function for home health care

NASA Astrophysics Data System (ADS)

Ban, Yunho; Choi, Samjin; Jiang, Zhongwei; Park, Chanwon

2005-12-01

Some reports show that the physiological information measured in hospital is not enough without the one measured in home. The physiological information monitored in home, therefore, is strongly required recently. The goal of this research is to develop a wearable and tractable sensor system for detecting biomedical signals such as cardiac rhythm, respiration, body movement, and percentage of body fat (%BF) and for home health care. A belt type sensor for this purpose is developed, which consists of sensing materials of PVDF film and conductive fabrics. Also several data processing techniques, such as the discrete wavelet transform, cross correlation and adaptive filtering method, were introduced to eliminate noises and base wandering and to extract the specified components. The ECG and respiration signals obtained by the proposed belt type sensor system gave good agreements with commercial medical system. Furthermore, the body fat (%BF) measurement based on the four-electrode BIA was also built in the belt sensor. The body fat was calculated by measuring the body impedance from the belt type sensor and compared with the predicted %BF measured by the commercial adipometer (TBF-607). The results validated also the efficiency of the belt type sensor system.

Integrating a project monitoring system into a public health network: experiences from Alive & Thrive Vietnam.

PubMed

Tuan, Nguyen Thanh; Alayon, Silvia; Do, Tran Thanh; Ngan, Tran Thi; Hajeebhoy, Nemat

2015-01-01

Little information is available about how to build a monitoring system to measure the output of preventive nutrition interventions, such as counselling on infant and young child feeding. This paper describes the Alive & Thrive Vietnam (A&T) project experience in nesting a large-scale project monitoring system into the existing public health information system (e.g. using the system and resources), and in using monitoring data to strengthen service delivery in 15 provinces with A&T franchises. From January 2012 to April 2014, the 780 A&T franchises provided 1,700,000 counselling contacts (~3/4 by commune franchises). In commune franchises in April 2014, 80% of mothers who were pregnant or with children under two years old had been to the counselling service at least one time, and 87% of clients had been to the service earlier. Monitoring data are used to track the progress of the project, make decisions, provide background for a costing study and advocate for the integration of nutrition counselling indicators into the health information system nationwide. With careful attention to the needs of stakeholders at multiple levels, clear data quality assurance measures and strategic feedback mechanisms, it is feasible to monitor the scale-up of nutrition programmes through the existing routine health information system.

Quantifying control effort of biological and technical movements: an information-entropy-based approach.

PubMed

Haeufle, D F B; Günther, M; Wunner, G; Schmitt, S

2014-01-01

In biomechanics and biorobotics, muscles are often associated with reduced movement control effort and simplified control compared to technical actuators. This is based on evidence that the nonlinear muscle properties positively influence movement control. It is, however, open how to quantify the simplicity aspect of control effort and compare it between systems. Physical measures, such as energy consumption, stability, or jerk, have already been applied to compare biological and technical systems. Here a physical measure of control effort based on information entropy is presented. The idea is that control is simpler if a specific movement is generated with less processed sensor information, depending on the control scheme and the physical properties of the systems being compared. By calculating the Shannon information entropy of all sensor signals required for control, an information cost function can be formulated allowing the comparison of models of biological and technical control systems. Exemplarily applied to (bio-)mechanical models of hopping, the method reveals that the required information for generating hopping with a muscle driven by a simple reflex control scheme is only I=32 bits versus I=660 bits with a DC motor and a proportional differential controller. This approach to quantifying control effort captures the simplicity of a control scheme and can be used to compare completely different actuators and control approaches.

Earth observing system. Data and information system. Volume 2A: Report of the EOS Data Panel

NASA Technical Reports Server (NTRS)

1986-01-01

The purpose of this report is to provide NASA with a rationale and recommendations for planning, implementing, and operating an Earth Observing System data and information system that can evolve to meet the Earth Observing System's needs in the 1990s. The Earth Observing System (Eos), defined by the Eos Science and Mission Requirements Working Group, consists of a suite of instruments in low Earth orbit acquiring measurements of the Earth's atmosphere, surface, and interior; an information system to support scientific research; and a vigorous program of scientific research, stressing study of global-scale processes that shape and influence the Earth as a system. The Eos data and information system is conceived as a complete research information system that would transcend the traditional mission data system, and include additional capabilties such as maintaining long-term, time-series data bases and providing access by Eos researchers to relevant non-Eos data. The Working Group recommends that the Eos data and information system be initiated now, with existing data, and that the system evolve into one that can meet the intensive research and data needs that will exist when Eos spacecraft are returning data in the 1990s.

Testing of CMA-2000 Microwave Landing System (MLS) airborne receiver

NASA Astrophysics Data System (ADS)

Labreche, L.; Murfin, A. J.

1989-09-01

Microwave landing system (MLS) is a precision approach and landing guidance system which provides position information and various air to ground data. Position information is provided on a wide coverage sector and is determined by an azimuth angle measurement, an elevation angle measurement, and a range measurement. MLS performance standards and testing of the MLS airborne receiver is mainly governed by Technical Standard Order TSO-C104 issued by the Federal Aviation Administration. This TSO defines detailed test procedures for use in determining the required performance under standard and stressed conditions. It also imposes disciplines on software development and testing procedures. Testing performed on the CMA-2000 MLS receiver and methods used in its validation are described. A computer automated test system has been developed to test for compliance with RTCA/DO-177 Minimum Operation Performance Standards. Extensive software verification and traceability tests designed to ensure compliance with RTCA/DO-178 are outlined.

The use of a robotic tibial rotation device and an electromagnetic tracking system to accurately reproduce the clinical dial test.

PubMed

Stinton, S K; Siebold, R; Freedberg, H; Jacobs, C; Branch, T P

2016-03-01

The purpose of this study was to: (1) determine whether a robotic tibial rotation device and an electromagnetic tracking system could accurately reproduce the clinical dial test at 30° of knee flexion; (2) compare rotation data captured at the footplates of the robotic device to tibial rotation data measured using an electromagnetic sensor on the proximal tibia. Thirty-two unilateral ACL-reconstructed patients were examined using a robotic tibial rotation device that mimicked the dial test. The data reported in this study is only from the healthy legs of these patients. Torque was applied through footplates and was measured using servomotors. Lower leg motion was measured at the foot using the motors. Tibial motion was also measured through an electromagnetic tracking system and a sensor on the proximal tibia. Load-deformation curves representing rotational motion of the foot and tibia were compared using Pearson's correlation coefficients. Off-axis motions including medial-lateral translation and anterior-posterior translation were also measured using the electromagnetic system. The robotic device and electromagnetic system were able to provide axial rotation data and translational data for the tibia during the dial test. Motion measured at the foot was not correlated to motion of the tibial tubercle in internal rotation or in external rotation. The position of the tibial tubercle was 26.9° ± 11.6° more internally rotated than the foot at torque 0 Nm. Medial-lateral translation and anterior-posterior translation were combined to show the path of the tubercle in the coronal plane during tibial rotation. The information captured during a manual dial test includes both rotation of the tibia and proximal tibia translation. All of this information can be captured using a robotic tibial axial rotation device with an electromagnetic tracking system. The pathway of the tibial tubercle during tibial axial rotation can provide additional information about knee instability without relying on side-to-side comparison between knees. The translation of the proximal tibia is important information that must be considered in addition to axial rotation of the tibia when performing a dial test whether done manually or with a robotic device. Instrumented foot position cannot provide the same information. IV.

Constructor theory of information

PubMed Central

Deutsch, David; Marletto, Chiara

2015-01-01

We propose a theory of information expressed solely in terms of which transformations of physical systems are possible and which are impossible—i.e. in constructor-theoretic terms. It includes conjectured, exact laws of physics expressing the regularities that allow information to be physically instantiated. Although these laws are directly about information, independently of the details of particular physical instantiations, information is not regarded as an a priori mathematical or logical concept, but as something whose nature and properties are determined by the laws of physics alone. This theory solves a problem at the foundations of existing information theory, namely that information and distinguishability are each defined in terms of the other. It also explains the relationship between classical and quantum information, and reveals the single, constructor-theoretic property underlying the most distinctive phenomena associated with the latter, including the lack of in-principle distinguishability of some states, the impossibility of cloning, the existence of pairs of variables that cannot simultaneously have sharp values, the fact that measurement processes can be both deterministic and unpredictable, the irreducible perturbation caused by measurement, and locally inaccessible information (as in entangled systems). PMID:25663803

Is There Evidence of Cost Benefits of Electronic Medical Records, Standards, or Interoperability in Hospital Information Systems? Overview of Systematic Reviews

PubMed Central

2017-01-01

Background Electronic health (eHealth) interventions may improve the quality of care by providing timely, accessible information about one patient or an entire population. Electronic patient care information forms the nucleus of computerized health information systems. However, interoperability among systems depends on the adoption of information standards. Additionally, investing in technology systems requires cost-effectiveness studies to ensure the sustainability of processes for stakeholders. Objective The objective of this study was to assess cost-effectiveness of the use of electronically available inpatient data systems, health information exchange, or standards to support interoperability among systems. Methods An overview of systematic reviews was conducted, assessing the MEDLINE, Cochrane Library, LILACS, and IEEE Library databases to identify relevant studies published through February 2016. The search was supplemented by citations from the selected papers. The primary outcome sought the cost-effectiveness, and the secondary outcome was the impact on quality of care. Independent reviewers selected studies, and disagreement was resolved by consensus. The quality of the included studies was evaluated using a measurement tool to assess systematic reviews (AMSTAR). Results The primary search identified 286 papers, and two papers were manually included. A total of 211 were systematic reviews. From the 20 studies that were selected after screening the title and abstract, 14 were deemed ineligible, and six met the inclusion criteria. The interventions did not show a measurable effect on cost-effectiveness. Despite the limited number of studies, the heterogeneity of electronic systems reported, and the types of intervention in hospital routines, it was possible to identify some preliminary benefits in quality of care. Hospital information systems, along with information sharing, had the potential to improve clinical practice by reducing staff errors or incidents, improving automated harm detection, monitoring infections more effectively, and enhancing the continuity of care during physician handoffs. Conclusions This review identified some benefits in the quality of care but did not provide evidence that the implementation of eHealth interventions had a measurable impact on cost-effectiveness in hospital settings. However, further evidence is needed to infer the impact of standards adoption or interoperability in cost benefits of health care; this in turn requires further research. PMID:28851681

Is There Evidence of Cost Benefits of Electronic Medical Records, Standards, or Interoperability in Hospital Information Systems? Overview of Systematic Reviews.

PubMed

Reis, Zilma Silveira Nogueira; Maia, Thais Abreu; Marcolino, Milena Soriano; Becerra-Posada, Francisco; Novillo-Ortiz, David; Ribeiro, Antonio Luiz Pinho

2017-08-29

Electronic health (eHealth) interventions may improve the quality of care by providing timely, accessible information about one patient or an entire population. Electronic patient care information forms the nucleus of computerized health information systems. However, interoperability among systems depends on the adoption of information standards. Additionally, investing in technology systems requires cost-effectiveness studies to ensure the sustainability of processes for stakeholders. The objective of this study was to assess cost-effectiveness of the use of electronically available inpatient data systems, health information exchange, or standards to support interoperability among systems. An overview of systematic reviews was conducted, assessing the MEDLINE, Cochrane Library, LILACS, and IEEE Library databases to identify relevant studies published through February 2016. The search was supplemented by citations from the selected papers. The primary outcome sought the cost-effectiveness, and the secondary outcome was the impact on quality of care. Independent reviewers selected studies, and disagreement was resolved by consensus. The quality of the included studies was evaluated using a measurement tool to assess systematic reviews (AMSTAR). The primary search identified 286 papers, and two papers were manually included. A total of 211 were systematic reviews. From the 20 studies that were selected after screening the title and abstract, 14 were deemed ineligible, and six met the inclusion criteria. The interventions did not show a measurable effect on cost-effectiveness. Despite the limited number of studies, the heterogeneity of electronic systems reported, and the types of intervention in hospital routines, it was possible to identify some preliminary benefits in quality of care. Hospital information systems, along with information sharing, had the potential to improve clinical practice by reducing staff errors or incidents, improving automated harm detection, monitoring infections more effectively, and enhancing the continuity of care during physician handoffs. This review identified some benefits in the quality of care but did not provide evidence that the implementation of eHealth interventions had a measurable impact on cost-effectiveness in hospital settings. However, further evidence is needed to infer the impact of standards adoption or interoperability in cost benefits of health care; this in turn requires further research. ©Zilma Silveira Nogueira Reis, Thais Abreu Maia, Milena Soriano Marcolino, Francisco Becerra-Posada, David Novillo-Ortiz, Antonio Luiz Pinho Ribeiro. Originally published in JMIR Medical Informatics (http://medinform.jmir.org), 29.08.2017.

Standoff imaging of a masked human face using a 670 GHz high resolution radar

NASA Astrophysics Data System (ADS)

Kjellgren, Jan; Svedin, Jan; Cooper, Ken B.

2011-11-01

This paper presents an exploratory attempt to use high-resolution radar measurements for face identification in forensic applications. An imaging radar system developed by JPL was used to measure a human face at 670 GHz. Frontal views of the face were measured both with and without a ski mask at a range of 25 m. The realized spatial resolution was roughly 1 cm in all three dimensions. The surfaces of the ski mask and the face were detected by using the two dominating reflections from amplitude data. Various methods for visualization of these surfaces are presented. The possibility to use radar data to determine certain face distance measures between well-defined face landmarks, typically used for anthropometric statistics, was explored. The measures used here were face length, frontal breadth and interpupillary distance. In many cases the radar system seems to provide sufficient information to exclude an innocent subject from suspicion. For an accurate identification it is believed that a system must provide significantly more information.

Boundary displacement measurements using multi-energy soft x-rays

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tritz, K., E-mail: ktritz@pppl.gov; Stutman, D.; Diallo, A.

The Multi-Energy Soft X-ray (ME-SXR) system on NSTX provides radial profiles of soft X-ray emission, measured through a set of filters with varying thickness, which have been used to reconstruct the electron temperature on fast time scales (∼10 kHz). In addition to this functionality, here we show that the ME-SXR system can be used to measure the boundary displacement of the NSTX plasma with a few mm spatial resolution during magnetohydrodyamic (MHD) activity. Boundary displacement measurements can serve to inform theoretical predictions of neoclassical toroidal viscosity, and will be used to investigate other edge phenomena on NSTX-U. For example, boundary measurementsmore » using filtered SXR measurements can provide information on pedestal steepness and dynamic evolution leading up to and during edge localized modes (ELMs). Future applications include an assessment of a simplified, filtered SXR edge detection system as well as its suitability for real-time non-magnetic boundary feedback for ELMs, MHD, and equilibrium position control.« less

Data fusion approach to threat assessment for radar resources management

NASA Astrophysics Data System (ADS)

Komorniczak, Wojciech; Pietrasinski, Jerzy; Solaiman, Basel

2002-03-01

The paper deals with the problem of the multifunction radar resources management. The problem consists of target/tasks ranking and tasks scheduling. The paper is focused on the target ranking, with the data fusion approach. The data from the radar (object's velocity, range, altitude, direction etc.), IFF system (Identification Friend or Foe) and ESM system (Electronic Support Measures - information concerning threat's electro - magnetic activities) is used to decide of the importance assignment for each detected target. The main problem consists of the multiplicity of various types of the input information. The information from the radar is of the probabilistic or ambiguous imperfection type and the IFF information is of evidential type. To take the advantage of these information sources the advanced data fusion system is necessary. The system should deal with the following situations: fusion of the evidential and fuzzy information, fusion of the evidential information and a'priori information. The paper describes the system which fuses the fuzzy and the evidential information without previous change to the same type of information. It is also described the proposal of using of the dynamic fuzzy qualifiers. The paper shows the results of the preliminary system's tests.

Development of quantitative security optimization approach for the picture archives and carrying system between a clinic and a rehabilitation center

NASA Astrophysics Data System (ADS)

Haneda, Kiyofumi; Kajima, Toshio; Koyama, Tadashi; Muranaka, Hiroyuki; Dojo, Hirofumi; Aratani, Yasuhiko

2002-05-01

The target of our study is to analyze the level of necessary security requirements, to search for suitable security measures and to optimize security distribution to every portion of the medical practice. Quantitative expression must be introduced to our study, if possible, to enable simplified follow-up security procedures and easy evaluation of security outcomes or results. Using fault tree analysis (FTA), system analysis showed that system elements subdivided into groups by details result in a much more accurate analysis. Such subdivided composition factors greatly depend on behavior of staff, interactive terminal devices, kinds of services provided, and network routes. Security measures were then implemented based on the analysis results. In conclusion, we identified the methods needed to determine the required level of security and proposed security measures for each medical information system, and the basic events and combinations of events that comprise the threat composition factors. Methods for identifying suitable security measures were found and implemented. Risk factors for each basic event, a number of elements for each composition factor, and potential security measures were found. Methods to optimize the security measures for each medical information system were proposed, developing the most efficient distribution of risk factors for basic events.

AERIAL MEASURING SYSTEM IN JAPAN

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lyons, Craig; Colton, David

2012-01-01

The U.S. Department of Energy National Nuclear Security Agency’s Aerial Measuring System deployed personnel and equipment to partner with the U.S. Air Force in Japan to conduct multiple aerial radiological surveys. These were the first and most comprehensive sources of actionable information for U.S. interests in Japan and provided early confirmation to the government of Japan as to the extent of the release from the Fukushima Daiichi Nuclear Power Generation Station. Many challenges were overcome quickly during the first 48 hours; including installation and operation of Aerial Measuring System equipment on multiple U.S. Air Force Japan aircraft, flying over difficultmore » terrain, and flying with talented pilots who were unfamiliar with the Aerial Measuring System flight patterns. These all combined to make for a dynamic and non-textbook situation. In addition, the data challenges of the multiple and on-going releases, and integration with the Japanese government to provide valid aerial radiological survey products that both military and civilian customers could use to make informed decisions, was extremely complicated. The Aerial Measuring System Fukushima response provided insight in addressing these challenges and gave way to an opportunity for the expansion of the Aerial Measuring System’s mission beyond the borders of the US.« less

Student Team Projects in Information Systems Development: Measuring Collective Creative Efficacy

ERIC Educational Resources Information Center

Cheng, Hsiu-Hua; Yang, Heng-Li

2011-01-01

For information systems development project student teams, learning how to improve software development processes is an important training. Software process improvement is an outcome of a number of creative behaviours. Social cognitive theory states that the efficacy of judgment influences behaviours. This study explores the impact of three types…

41 CFR 102-192.175 - What types of support does GSA offer to Federal agency mail management programs?

Code of Federal Regulations, 2010 CFR

2010-07-01

... with Federal agencies; (c) Developing and providing access to a Governmentwide management information system for mail; (d) Helping agencies develop performance measures and management information systems for... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What types of support...

Forest Insect and Disease Tally System (FINDIT) user manual

Treesearch

Barbara J. Bentz

2000-01-01

FINDIT, the Forest Insect and Disease Tally System, is an easy-to-use tool for analyzing insect and disease population information taken during stand surveys. Incidence of insects, pathogens, and other biotic and abiotic influences on forest ecosystems are summarized using traditional mensurational measurements. Information is summarized by diameter class, tree species...

Evaluation of the Computerized Assessment System for Psychotherapy Evaluation and Research (CASPER) as a Measure of Treatment Effectiveness with Psychiatric Inpatients

ERIC Educational Resources Information Center

Kinnaman, Joanna E. Strong; Farrell, Albert D.; Bisconer, Sarah W.

2006-01-01

Assessment procedures to evaluate inpatient treatment effectiveness can provide information to inform clinical practice. The Computerized Assessment System for Psychotherapy Evaluation and Research (CASPER) represents a standardized approach to assess patients' target problems that combines elements of individualized and nomothetic approaches.…

Using Student Test Scores to Measure Teacher Performance: Some Problems in the Design and Implementation of Evaluation Systems

ERIC Educational Resources Information Center

Ballou, Dale; Springer, Matthew G.

2015-01-01

Our aim in this article is to draw attention to some underappreciated problems in the design and implementation of evaluation systems that incorporate value-added measures. We focus on four: (1) taking into account measurement error in teacher assessments, (2) revising teachers' scores as more information becomes available about their students,…

MedEx: a medication information extraction system for clinical narratives

PubMed Central

Stenner, Shane P; Doan, Son; Johnson, Kevin B; Waitman, Lemuel R; Denny, Joshua C

2010-01-01

Medication information is one of the most important types of clinical data in electronic medical records. It is critical for healthcare safety and quality, as well as for clinical research that uses electronic medical record data. However, medication data are often recorded in clinical notes as free-text. As such, they are not accessible to other computerized applications that rely on coded data. We describe a new natural language processing system (MedEx), which extracts medication information from clinical notes. MedEx was initially developed using discharge summaries. An evaluation using a data set of 50 discharge summaries showed it performed well on identifying not only drug names (F-measure 93.2%), but also signature information, such as strength, route, and frequency, with F-measures of 94.5%, 93.9%, and 96.0% respectively. We then applied MedEx unchanged to outpatient clinic visit notes. It performed similarly with F-measures over 90% on a set of 25 clinic visit notes. PMID:20064797

Sensor Web Dynamic Measurement Techniques and Adaptive Observing Strategies

NASA Technical Reports Server (NTRS)

Talabac, Stephen J.

2004-01-01

Sensor Web observing systems may have the potential to significantly improve our ability to monitor, understand, and predict the evolution of rapidly evolving, transient, or variable environmental features and events. This improvement will come about by integrating novel data collection techniques, new or improved instruments, emerging communications technologies and protocols, sensor mark-up languages, and interoperable planning and scheduling systems. In contrast to today's observing systems, "event-driven" sensor webs will synthesize real- or near-real time measurements and information from other platforms and then react by reconfiguring the platforms and instruments to invoke new measurement modes and adaptive observation strategies. Similarly, "model-driven" sensor webs will utilize environmental prediction models to initiate targeted sensor measurements or to use a new observing strategy. The sensor web concept contrasts with today's data collection techniques and observing system operations concepts where independent measurements are made by remote sensing and in situ platforms that do not share, and therefore cannot act upon, potentially useful complementary sensor measurement data and platform state information. This presentation describes NASA's view of event-driven and model-driven Sensor Webs and highlights several research and development activities at the Goddard Space Flight Center.

An information theory approach for evaluating earth radiation budget (ERB) measurements - Nonuniform sampling of diurnal longwave flux variations

NASA Technical Reports Server (NTRS)

Halyo, Nesim; Direskeneli, Haldun; Barkstrom, Bruce R.

1991-01-01

Satellite measurements are subject to a wide range of uncertainties due to their temporal, spatial, and directional sampling characteristics. An information-theory approach is suggested to examine the nonuniform temporal sampling of ERB measurements. The information (i.e., its entropy or uncertainty) before and after the measurements is determined, and information gain (IG) is defined as a reduction in the uncertainties involved. A stochastic model for the diurnal outgoing flux variations that affect the ERB is developed. Using Gaussian distributions for the a priori and measured radiant exitance fields, the IG is obtained by computing the a posteriori covariance. The IG for the monthly outgoing flux measurements is examined for different orbital parameters and orbital tracks, using the Earth Observing System orbital parameters as specific examples. Variations in IG due to changes in the orbit's inclination angle and the initial ascending node local time are investigated.

Accessible Information for Equally-Distant Partially-Entangled Alphabet State Resource

NASA Astrophysics Data System (ADS)

Hao, San-Ru; Hou, Bo-Yu; Xi, Xiao-Qiang; Yue, Rui-Hong

2002-02-01

We have proposed a quantum system with equally-distant partially-entangled alphabet states which has the minimal mutual overlap and the highly distinguishability, these quantum states are used as the "signal states" of the quantum communication. We have also constructed the positive operator-valued measure for these "signal states" and discussed their entanglement properties and measurement of entanglement. We calculate the accessible information for these alphabet states and show that the accessible information is closely related to the entanglement of the "signal states": the higher the entanglement of the "signal states", the better the accessible information of the quantum system, and the accessible information reaches its maximal value when the alphabet states have their maximal entanglement. The project supported in part by Foundation of the Science and Technology Committee of China, and Foundation of the Science and Technology Committee of Hunan Province of China under the contract FSTCH-21000205

Universal quantum uncertainty relations between nonergodicity and loss of information

NASA Astrophysics Data System (ADS)

Awasthi, Natasha; Bhattacharya, Samyadeb; SenDe, Aditi; Sen, Ujjwal

2018-03-01

We establish uncertainty relations between information loss in general open quantum systems and the amount of nonergodicity of the corresponding dynamics. The relations hold for arbitrary quantum systems interacting with an arbitrary quantum environment. The elements of the uncertainty relations are quantified via distance measures on the space of quantum density matrices. The relations hold for arbitrary distance measures satisfying a set of intuitively satisfactory axioms. The relations show that as the nonergodicity of the dynamics increases, the lower bound on information loss decreases, which validates the belief that nonergodicity plays an important role in preserving information of quantum states undergoing lossy evolution. We also consider a model of a central qubit interacting with a fermionic thermal bath and derive its reduced dynamics to subsequently investigate the information loss and nonergodicity in such dynamics. We comment on the "minimal" situations that saturate the uncertainty relations.

Reasoning from non-stationarity

NASA Astrophysics Data System (ADS)

Struzik, Zbigniew R.; van Wijngaarden, Willem J.; Castelo, Robert

2002-11-01

Complex real-world (biological) systems often exhibit intrinsically non-stationary behaviour of their temporal characteristics. We discuss local measures of scaling which can capture and reveal changes in a system's behaviour. Such measures offer increased insight into a system's behaviour and are superior to global, spectral characteristics like the multifractal spectrum. They are, however, often inadequate for fully understanding and modelling the phenomenon. We illustrate an attempt to capture complex model characteristics by analysing (multiple order) correlations in a high dimensional space of parameters of the (biological) system being studied. Both temporal information, among others local scaling information, and external descriptors/parameters, possibly influencing the system's state, are used to span the search space investigated for the presence of a (sub-)optimal model. As an example, we use fetal heartbeat monitored during labour.

The value of forage measurement information in rangeland management. [implementation of satellite data in range management

NASA Technical Reports Server (NTRS)

Lietzke, K. R.

1975-01-01

An economic model and simulation are developed to estimate the potential social benefit arising from the use of alternative measurement systems in rangeland management. In order to estimate these benefits, it was necessary to model three separate systems: the range environment, the rangeland manager, and the information system which links the two. The rancher's decision-making behavior is modeled according to sound economic principles. Results indicate substantial potential benefits, particularly when used in assisting management of government-operated ranges; possible annual benefits in this area range from $20 to $46 million, depending upon the system capabilities assumed. Possible annual benefit in privately-managed stocker operations range from $2.8 to $49.5 million, depending upon where actual rancher capabilities lie and what system capabilities are assumed.

Assessing the value of diagnostic imaging: the role of perception

NASA Astrophysics Data System (ADS)

Potchen, E. J.; Cooper, Thomas G.

2000-04-01

The value of diagnostic radiology rests in its ability to provide information. Information is defined as a reduction in randomness. Quality improvement in any system requires diminution in the variation in its performance. The major variation in performance of the system of diagnostic radiology occurs in observer performance and in the communication of information from the observer to someone who will apply that information to the benefit of the patient. The ability to provide information can be determined by observer performance studies using a receiver-operating characteristic (ROC) curve analysis. The amount of information provided by each observer can be measured in terms of the uncertainty they reduce. Using a set of standardized radiographs, some normal and some abnormal, sorting them randomly, and then asking an observer to redistribute them according to their probability of normality can measure the difference in the value added by different observers. By applying this observer performance measure, we have been able to characterize individual radiologists, groups of radiologists, and regions of the United States in their ability to add value in chest radiology. The use of these technologies in health care may improve upon the contribution of diagnostic imaging.

A Robust Approach for a Filter-Based Monocular Simultaneous Localization and Mapping (SLAM) System

PubMed Central

Munguía, Rodrigo; Castillo-Toledo, Bernardino; Grau, Antoni

2013-01-01

Simultaneous localization and mapping (SLAM) is an important problem to solve in robotics theory in order to build truly autonomous mobile robots. This work presents a novel method for implementing a SLAM system based on a single camera sensor. The SLAM with a single camera, or monocular SLAM, is probably one of the most complex SLAM variants. In this case, a single camera, which is freely moving through its environment, represents the sole sensor input to the system. The sensors have a large impact on the algorithm used for SLAM. Cameras are used more frequently, because they provide a lot of information and are well adapted for embedded systems: they are light, cheap and power-saving. Nevertheless, and unlike range sensors, which provide range and angular information, a camera is a projective sensor providing only angular measurements of image features. Therefore, depth information (range) cannot be obtained in a single step. In this case, special techniques for feature system-initialization are needed in order to enable the use of angular sensors (as cameras) in SLAM systems. The main contribution of this work is to present a novel and robust scheme for incorporating and measuring visual features in filtering-based monocular SLAM systems. The proposed method is based in a two-step technique, which is intended to exploit all the information available in angular measurements. Unlike previous schemes, the values of parameters used by the initialization technique are derived directly from the sensor characteristics, thus simplifying the tuning of the system. The experimental results show that the proposed method surpasses the performance of previous schemes. PMID:23823972

Information content and sensitivity of the 3β + 2α lidar measurement system for aerosol microphysical retrievals

NASA Astrophysics Data System (ADS)

Burton, Sharon P.; Chemyakin, Eduard; Liu, Xu; Knobelspiesse, Kirk; Stamnes, Snorre; Sawamura, Patricia; Moore, Richard H.; Hostetler, Chris A.; Ferrare, Richard A.

2016-11-01

There is considerable interest in retrieving profiles of aerosol effective radius, total number concentration, and complex refractive index from lidar measurements of extinction and backscatter at several wavelengths. The combination of three backscatter channels plus two extinction channels (3β + 2α) is particularly important since it is believed to be the minimum configuration necessary for the retrieval of aerosol microphysical properties and because the technological readiness of lidar systems permits this configuration on both an airborne and future spaceborne instrument. The second-generation NASA Langley airborne High Spectral Resolution Lidar (HSRL-2) has been making 3β + 2α measurements since 2012. The planned NASA Aerosol/Clouds/Ecosystems (ACE) satellite mission also recommends the 3β + 2α combination.Here we develop a deeper understanding of the information content and sensitivities of the 3β + 2α system in terms of aerosol microphysical parameters of interest. We use a retrieval-free methodology to determine the basic sensitivities of the measurements independent of retrieval assumptions and constraints. We calculate information content and uncertainty metrics using tools borrowed from the optimal estimation methodology based on Bayes' theorem, using a simplified forward model look-up table, with no explicit inversion. The forward model is simplified to represent spherical particles, monomodal log-normal size distributions, and wavelength-independent refractive indices. Since we only use the forward model with no retrieval, the given simplified aerosol scenario is applicable as a best case for all existing retrievals in the absence of additional constraints. Retrieval-dependent errors due to mismatch between retrieval assumptions and true atmospheric aerosols are not included in this sensitivity study, and neither are retrieval errors that may be introduced in the inversion process. The choice of a simplified model adds clarity to the understanding of the uncertainties in such retrievals, since it allows for separately assessing the sensitivities and uncertainties of the measurements alone that cannot be corrected by any potential or theoretical improvements to retrieval methodology but must instead be addressed by adding information content.The sensitivity metrics allow for identifying (1) information content of the measurements vs. a priori information; (2) error bars on the retrieved parameters; and (3) potential sources of cross-talk or "compensating" errors wherein different retrieval parameters are not independently captured by the measurements. The results suggest that the 3β + 2α measurement system is underdetermined with respect to the full suite of microphysical parameters considered in this study and that additional information is required, in the form of additional coincident measurements (e.g., sun-photometer or polarimeter) or a priori retrieval constraints. A specific recommendation is given for addressing cross-talk between effective radius and total number concentration.

NCME Award: University-Wide Utilization of Student Outcome Information in Assessing and Improving Academic Programs.

ERIC Educational Resources Information Center

Educational Measurement: Issues and Practice, 1984

1984-01-01

The University of Tennessee, Knoxville conducted a system-wide effort to increase use of student outcome information in assessing and improving academic programs. For this effort, the university received the National Council on Measurement in Education award for an outstanding example of an application of educational measurement technology. (EGS)

Pressure and Temperature Sensitive Paint Field System

NASA Technical Reports Server (NTRS)

Sprinkle, Danny R.; Obara, Clifford J.; Amer, Tahani R.; Faulcon, Nettie D.; Carmine, Michael T.; Burkett, Cecil G.; Pritchard, Daniel W.; Oglesby, Donald M.

2004-01-01

This report documents the Pressure and Temperature Sensitive Paint Field System that is used to provide global surface pressure and temperature measurements on models tested in Langley wind tunnels. The system was developed and is maintained by Global Surface Measurements Team personnel of the Data Acquisition and Information Management Branch in the Research Facilities Services Competency. Descriptions of the system hardware and software are presented and operational procedures are detailed.

Applications of the DOE/NASA wind turbine engineering information system

NASA Technical Reports Server (NTRS)

Neustadter, H. E.; Spera, D. A.

1981-01-01

A statistical analysis of data obtained from the Technology and Engineering Information Systems was made. The systems analyzed consist of the following elements: (1) sensors which measure critical parameters (e.g., wind speed and direction, output power, blade loads and component vibrations); (2) remote multiplexing units (RMUs) on each wind turbine which frequency-modulate, multiplex and transmit sensor outputs; (3) on-site instrumentation to record, process and display the sensor output; and (4) statistical analysis of data. Two examples of the capabilities of these systems are presented. The first illustrates the standardized format for application of statistical analysis to each directly measured parameter. The second shows the use of a model to estimate the variability of the rotor thrust loading, which is a derived parameter.

Multispectral system analysis through modeling and simulation

NASA Technical Reports Server (NTRS)

Malila, W. A.; Gleason, J. M.; Cicone, R. C.

1977-01-01

The design and development of multispectral remote sensor systems and associated information extraction techniques should be optimized under the physical and economic constraints encountered and yet be effective over a wide range of scene and environmental conditions. Direct measurement of the full range of conditions to be encountered can be difficult, time consuming, and costly. Simulation of multispectral data by modeling scene, atmosphere, sensor, and data classifier characteristics is set forth as a viable alternative, particularly when coupled with limited sets of empirical measurements. A multispectral system modeling capability is described. Use of the model is illustrated for several applications - interpretation of remotely sensed data from agricultural and forest scenes, evaluating atmospheric effects in Landsat data, examining system design and operational configuration, and development of information extraction techniques.

Multispectral system analysis through modeling and simulation

NASA Technical Reports Server (NTRS)

Malila, W. A.; Gleason, J. M.; Cicone, R. C.

1977-01-01

The design and development of multispectral remote sensor systems and associated information extraction techniques should be optimized under the physical and economic constraints encountered and yet be effective over a wide range of scene and environmental conditions. Direct measurement of the full range of conditions to be encountered can be difficult, time consuming, and costly. Simulation of multispectral data by modeling scene, atmosphere, sensor, and data classifier characteristics is set forth as a viable alternative, particularly when coupled with limited sets of empirical measurements. A multispectral system modeling capability is described. Use of the model is illustrated for several applications - interpretation of remotely sensed data from agricultural and forest scenes, evaluating atmospheric effects in LANDSAT data, examining system design and operational configuration, and development of information extraction techniques.

By the Numbers.

ERIC Educational Resources Information Center

Cooper, Bruce S.; McGrath, Michael; Monahan, Brian D.; Steele, Joanne Laughlin

1999-01-01

Educators can learn from business people accounting models that can be applied to managerial accounting, integrated information systems, focused/activity-based costing, decentralized information, and mission-driven costing. A sidebar discusses measuring technology's impact. (MLF)

An Electronic Patient-Reported Outcome Measures System in UK Chiropractic Practices: A Feasibility Study of Routine Collection of Outcomes and Costs.

PubMed

Newell, Dave; Diment, Emily; Bolton, Jenni E

2016-01-01

The purpose of this study was to test the feasibility of collecting valid and widely used health outcomes, including information concerning cost of care, using a Web-based patient-driven patient-reported outcome measure (PROM) collection process within a cohort of UK chiropractic practices. A Web-based PROM system (Care Response) was used. Patients with low back and neck pain were recruited from a group of chiropractic practices located in the United Kingdom. Information collected included demographic data, generic and condition-specific PROMs at the initial consultation and 90 days later, patient-reported experience measures, and additional health seeking to estimate costs of care. A group of 33 clinics provided information from a total of 1895 patients who completed baseline questionnaires with 844 (45%) completing the measures at 90-day follow-up. Subsequent outcomes suggest that more than 70% of patients improved over the course of treatment regardless of the outcome used. Using the baseline as a virtual counterfactual with respect to follow-up, we calculated quality-adjusted life years and the cost thereof resulting in a mean quality-adjusted life years gained of 0.8 with an average cost of £895 per quality-adjusted life year. Routine collection of PROMs, including information about cost, is feasible and can be achieved using an online system within a clinical practice environment. We describe a Web-based collection system and discuss the choice of measures leading to a comprehensive understanding of outcomes and costs in routine practice. Copyright © 2016 National University of Health Sciences. Published by Elsevier Inc. All rights reserved.

76 FR 31339 - Agency Information Collection Activities: Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-31

... extension of the currently approved tool for the collection of ambulatory care clinical performance measure...: Medicare Demonstration Ambulatory Care Quality Measure Performance Assessment Tool (``PAT''); Use: This... based system. This system will also provide a platform for developing tools to collect clinical quality...

Examining Users' E-Satisfaction in the Usage of Social Networking Sites; Contribution from Utilitarian and Hedonic Information Systems

NASA Astrophysics Data System (ADS)

Ariff, Mohd Shoki Md; Shan, Tay Kai; Zakuan, Norhayati; Ishak, Nawawi; Ridzuan Wahi, Mohd

2014-06-01

E-satisfaction (eSAT) is an important success factor of online service providers such as social networking sites (SNSs). The utilitarian and hedonic information systems are crucial in determining users' eSAT of SNSs, especially among young users. The utilitarian aspect of an information system is productivity-oriented which aims to enhance the users' task performance, and it is important in measuring eSAT of SNSs. In this study, the original constructs of Perceived Ease of Use (PEOU) and Perceived Usefulness (PU) of TAM of utilitarian information system was first developed in this research framework. The use of SNSs, such as Facebook, is pleasure-oriented, in which self-fulfilling values to the users are important in determining users' satisfaction towards the SNSs. Therefore, Perceived Enjoyment (PE) of hedonic information system is added to the framework. Thus, the research framework of this study includes both utilitarian (PEOU and PU) and hedonic (PE) aspects of information systems to determine Malaysian young users' eSAT in the usage of Facebook, a social networking site. In this framework, the effects of PEOU, PU and PE on eSAT in the usage of Facebook are examined among Facebook's users in the age of 18 - 24 years old. The effects of PEOU on PU and PE are also examined. Online questionnaire survey was employed and a total of 384 sets of questionnaires were gathered from users of Facebook. The results indicated that PEOU has positive effects on PU and PE in the context of Facebook. In addition, PEOU, PU and PE are also found to have positive effects on eSAT. PE of hedonic information system exerted higher effect on eSAT, compared to PEOU and PU of utilitarian information system, highlighting the importance of pleasure orientation in the usage of Facebook of SNSs. Managerial and theoretical implications of the study are discussed in term of measuring and enhancing users' eSAT in the usage of SNSs, particularly Facebook.

Short range spread-spectrum radiolocation system and method

DOEpatents

Smith, Stephen F.

2003-04-29

A short range radiolocation system and associated methods that allow the location of an item, such as equipment, containers, pallets, vehicles, or personnel, within a defined area. A small, battery powered, self-contained tag is provided to an item to be located. The tag includes a spread-spectrum transmitter that transmits a spread-spectrum code and identification information. A plurality of receivers positioned about the area receive signals from a transmitting tag. The position of the tag, and hence the item, is located by triangulation. The system employs three different ranging techniques for providing coarse, intermediate, and fine spatial position resolution. Coarse positioning information is provided by use of direct-sequence code phase transmitted as a spread-spectrum signal. Intermediate positioning information is provided by the use of a difference signal transmitted with the direct-sequence spread-spectrum code. Fine positioning information is provided by use of carrier phase measurements. An algorithm is employed to combine the three data sets to provide accurate location measurements.

The science of sustainable supply chains.

PubMed

O'Rourke, Dara

2014-06-06

Recent advances in the science and technology of global supply chain management offer near-real-time demand-response systems for decision-makers across production networks. Technology is helping propel "fast fashion" and "lean manufacturing," so that companies are better able to deliver products consumers want most. Yet companies know much less about the environmental and social impacts of their production networks. The failure to measure and manage these impacts can be explained in part by limitations in the science of sustainability measurement, as well as by weaknesses in systems to translate data into information that can be used by decision-makers inside corporations and government agencies. There also remain continued disincentives for firms to measure and pay the full costs of their supply chain impacts. I discuss the current state of monitoring, measuring, and analyzing information related to supply chain sustainability, as well as progress that has been made in translating this information into systems to advance more sustainable practices by corporations and consumers. Better data, decision-support tools, and incentives will be needed to move from simply managing supply chains for costs, compliance, and risk reduction to predicting and preventing unsustainable practices. Copyright © 2014, American Association for the Advancement of Science.

From information theory to quantitative description of steric effects.

PubMed

Alipour, Mojtaba; Safari, Zahra

2016-07-21

Immense efforts have been made in the literature to apply the information theory descriptors for investigating the electronic structure theory of various systems. In the present study, the information theoretic quantities, such as Fisher information, Shannon entropy, Onicescu information energy, and Ghosh-Berkowitz-Parr entropy, have been used to present a quantitative description for one of the most widely used concepts in chemistry, namely the steric effects. Taking the experimental steric scales for the different compounds as benchmark sets, there are reasonable linear relationships between the experimental scales of the steric effects and theoretical values of steric energies calculated from information theory functionals. Perusing the results obtained from the information theoretic quantities with the two representations of electron density and shape function, the Shannon entropy has the best performance for the purpose. On the one hand, the usefulness of considering the contributions of functional groups steric energies and geometries, and on the other hand, dissecting the effects of both global and local information measures simultaneously have also been explored. Furthermore, the utility of the information functionals for the description of steric effects in several chemical transformations, such as electrophilic and nucleophilic reactions and host-guest chemistry, has been analyzed. The functionals of information theory correlate remarkably with the stability of systems and experimental scales. Overall, these findings show that the information theoretic quantities can be introduced as quantitative measures of steric effects and provide further evidences of the quality of information theory toward helping theoreticians and experimentalists to interpret different problems in real systems.

Influence of measurement error on Maxwell's demon

NASA Astrophysics Data System (ADS)

Sørdal, Vegard; Bergli, Joakim; Galperin, Y. M.

2017-06-01

In any general cycle of measurement, feedback, and erasure, the measurement will reduce the entropy of the system when information about the state is obtained, while erasure, according to Landauer's principle, is accompanied by a corresponding increase in entropy due to the compression of logical and physical phase space. The total process can in principle be fully reversible. A measurement error reduces the information obtained and the entropy decrease in the system. The erasure still gives the same increase in entropy, and the total process is irreversible. Another consequence of measurement error is that a bad feedback is applied, which further increases the entropy production if the proper protocol adapted to the expected error rate is not applied. We consider the effect of measurement error on a realistic single-electron box Szilard engine, and we find the optimal protocol for the cycle as a function of the desired power P and error ɛ .

Sensor fusion of phase measuring profilometry and stereo vision for three-dimensional inspection of electronic components assembled on printed circuit boards.

PubMed

Hong, Deokhwa; Lee, Hyunki; Kim, Min Young; Cho, Hyungsuck; Moon, Jeon Il

2009-07-20

Automatic optical inspection (AOI) for printed circuit board (PCB) assembly plays a very important role in modern electronics manufacturing industries. Well-developed inspection machines in each assembly process are required to ensure the manufacturing quality of the electronics products. However, generally almost all AOI machines are based on 2D image-analysis technology. In this paper, a 3D-measurement-method-based AOI system is proposed consisting of a phase shifting profilometer and a stereo vision system for assembled electronic components on a PCB after component mounting and the reflow process. In this system information from two visual systems is fused to extend the shape measurement range limited by 2pi phase ambiguity of the phase shifting profilometer, and finally to maintain fine measurement resolution and high accuracy of the phase shifting profilometer with the measurement range extended by the stereo vision. The main purpose is to overcome the low inspection reliability problem of 2D-based inspection machines by using 3D information of components. The 3D shape measurement results on PCB-mounted electronic components are shown and compared with results from contact and noncontact 3D measuring machines. Based on a series of experiments, the usefulness of the proposed sensor system and its fusion technique are discussed and analyzed in detail.

Wireless sensor systems and methods, and methods of monitoring structures

DOEpatents

Kunerth, Dennis C.; Svoboda, John M.; Johnson, James T.; Harding, L. Dean; Klingler, Kerry M.

2007-02-20

A wireless sensor system includes a passive sensor apparatus configured to be embedded within a concrete structure to monitor infiltration of contaminants into the structure. The sensor apparatus includes charging circuitry and a plurality of sensors respectively configured to measure environmental parameters of the structure which include information related to the infiltration of contaminants into the structure. A reader apparatus is communicatively coupled to the sensor apparatus, the reader apparatus being configured to provide power to the charging circuitry during measurements of the environmental parameters by the sensors. The reader apparatus is configured to independently interrogate individual ones of the sensors to obtain information measured by the individual sensors. The reader apparatus is configured to generate an induction field to energize the sensor apparatus. Information measured by the sensor apparatus is transmitted to the reader apparatus via a response signal that is superimposed on a return induction field generated by the sensor apparatus. Methods of monitoring structural integrity of the structure are also provided.

Quality evaluation on an e-learning system in continuing professional education of nurses.

PubMed

Lin, I-Chun; Chien, Yu-Mei; Chang, I-Chiu

2006-01-01

Maintaining high quality in Web-based learning is a powerful means of increasing the overall efficiency and effectiveness of distance learning. Many studies have evaluated Web-based learning but seldom evaluate from the information systems (IS) perspective. This study applied the famous IS Success model in measuring the quality of a Web-based learning system using a Web-based questionnaire for data collection. One hundred and fifty four nurses participated in the survey. Based on confirmatory factor analysis, the variables of the research model fit for measuring the quality of a Web-based learning system. As Web-based education continues to grow worldwide, the results of this study may assist the system adopter (hospital executives), the learner (nurses), and the system designers in making reasonable and informed judgments with regard to the quality of Web-based learning system in continuing professional education.

Temporal information partitioning: Characterizing synergy, uniqueness, and redundancy in interacting environmental variables

NASA Astrophysics Data System (ADS)

Goodwell, Allison E.; Kumar, Praveen

2017-07-01

Information theoretic measures can be used to identify nonlinear interactions between source and target variables through reductions in uncertainty. In information partitioning, multivariate mutual information is decomposed into synergistic, unique, and redundant components. Synergy is information shared only when sources influence a target together, uniqueness is information only provided by one source, and redundancy is overlapping shared information from multiple sources. While this partitioning has been applied to provide insights into complex dependencies, several proposed partitioning methods overestimate redundant information and omit a component of unique information because they do not account for source dependencies. Additionally, information partitioning has only been applied to time-series data in a limited context, using basic pdf estimation techniques or a Gaussian assumption. We develop a Rescaled Redundancy measure (Rs) to solve the source dependency issue, and present Gaussian, autoregressive, and chaotic test cases to demonstrate its advantages over existing techniques in the presence of noise, various source correlations, and different types of interactions. This study constitutes the first rigorous application of information partitioning to environmental time-series data, and addresses how noise, pdf estimation technique, or source dependencies can influence detected measures. We illustrate how our techniques can unravel the complex nature of forcing and feedback within an ecohydrologic system with an application to 1 min environmental signals of air temperature, relative humidity, and windspeed. The methods presented here are applicable to the study of a broad range of complex systems composed of interacting variables.

PASTE: patient-centered SMS text tagging in a medication management system.

PubMed

Stenner, Shane P; Johnson, Kevin B; Denny, Joshua C

2012-01-01

To evaluate the performance of a system that extracts medication information and administration-related actions from patient short message service (SMS) messages. Mobile technologies provide a platform for electronic patient-centered medication management. MyMediHealth (MMH) is a medication management system that includes a medication scheduler, a medication administration record, and a reminder engine that sends text messages to cell phones. The object of this work was to extend MMH to allow two-way interaction using mobile phone-based SMS technology. Unprompted text-message communication with patients using natural language could engage patients in their healthcare, but presents unique natural language processing challenges. The authors developed a new functional component of MMH, the Patient-centered Automated SMS Tagging Engine (PASTE). The PASTE web service uses natural language processing methods, custom lexicons, and existing knowledge sources to extract and tag medication information from patient text messages. A pilot evaluation of PASTE was completed using 130 medication messages anonymously submitted by 16 volunteers via a website. System output was compared with manually tagged messages. Verified medication names, medication terms, and action terms reached high F-measures of 91.3%, 94.7%, and 90.4%, respectively. The overall medication name F-measure was 79.8%, and the medication action term F-measure was 90%. Other studies have demonstrated systems that successfully extract medication information from clinical documents using semantic tagging, regular expression-based approaches, or a combination of both approaches. This evaluation demonstrates the feasibility of extracting medication information from patient-generated medication messages.

DNA as information.

PubMed

Wills, Peter R

2016-03-13

This article reviews contributions to this theme issue covering the topic 'DNA as information' in relation to the structure of DNA, the measure of its information content, the role and meaning of information in biology and the origin of genetic coding as a transition from uninformed to meaningful computational processes in physical systems. © 2016 The Author(s).

Characteristics of Hydrogen Monitoring Systems for Severe Accident Management at a Nuclear Power Plant

NASA Astrophysics Data System (ADS)

Petrosyan, V. G.; Yeghoyan, E. A.; Grigoryan, A. D.; Petrosyan, A. P.; Movsisyan, M. R.

2018-02-01

One of the main objectives of severe accident management at a nuclear power plant is to protect the integrity of the containment, for which the most serious threat is possible ignition of the generated hydrogen. There should be a monitoring system providing information support of NPP personnel, ensuring data on the current state of a containment gaseous environment and trends in its composition changes. Monitoring systems' requisite characteristics definition issues are considered by the example of a particular power unit. Major characteristics important for proper information support are discussed. Some features of progression of severe accident scenarios at considered power unit are described and a possible influence of the hydrogen concentration monitoring system performance on the information support reliability in a severe accident is analyzed. The analysis results show that the following technical characteristics of the combustible gas monitoring systems are important for the proper information support of NPP personnel in the event of a severe accident at a nuclear power plant: measured parameters, measuring ranges and errors, update rate, minimum detectable concentration of combustible gas, monitoring reference points, environmental qualification parameters of the system components. For NPP power units with WWER-440/270 (230) type reactors, which have a relatively small containment volume, the update period for measurement results is a critical characteristic of the containment combustible gas monitoring system, and the choice of monitoring reference points should be focused not so much on the definition of places of possible hydrogen pockets but rather on the definition of places of a possible combustible mixture formation. It may be necessary for the above-mentioned power units to include in the emergency operating procedures measures aimed at a timely heat removal reduction from the containment environment if there are signs of a severe accident phase approaching to prevent a combustible mixture formation in the containment.

A fast and accurate surface plasmon resonance system

NASA Astrophysics Data System (ADS)

Espinosa Sánchez, Y. M.; Luna Moreno, D.; Noé Arias, E.; Garnica Campos, G.

2012-10-01

In this work we propose a Surface Plasmon Resonance (SPR) system driven by Labview software which produces a fast, simple and accuracy measurements of samples. The system takes 2000 data in a range of 20 degrees in 20 seconds and 0.01 degrees of resolution. All the information is sent from the computer to the microcontroller as an array of bytes in hexadecimal format to be analyzed. Besides to using the system in SPR measurement is possible to make measurement of the critic angle, and Brewster angle using the Abeles method.

Cognitive Load Measurement in a Virtual Reality-based Driving System for Autism Intervention

PubMed Central

Zhang, Lian; Wade, Joshua; Bian, Dayi; Fan, Jing; Swanson, Amy; Weitlauf, Amy; Warren, Zachary; Sarkar, Nilanjan

2016-01-01

Autism Spectrum Disorder (ASD) is a highly prevalent neurodevelopmental disorder with enormous individual and social cost. In this paper, a novel virtual reality (VR)-based driving system was introduced to teach driving skills to adolescents with ASD. This driving system is capable of gathering eye gaze, electroencephalography, and peripheral physiology data in addition to driving performance data. The objective of this paper is to fuse multimodal information to measure cognitive load during driving such that driving tasks can be individualized for optimal skill learning. Individualization of ASD intervention is an important criterion due to the spectrum nature of the disorder. Twenty adolescents with ASD participated in our study and the data collected were used for systematic feature extraction and classification of cognitive loads based on five well-known machine learning methods. Subsequently, three information fusion schemes—feature level fusion, decision level fusion and hybrid level fusion—were explored. Results indicate that multimodal information fusion can be used to measure cognitive load with high accuracy. Such a mechanism is essential since it will allow individualization of driving skill training based on cognitive load, which will facilitate acceptance of this driving system for clinical use and eventual commercialization. PMID:28966730

Cognitive Load Measurement in a Virtual Reality-based Driving System for Autism Intervention.

PubMed

Zhang, Lian; Wade, Joshua; Bian, Dayi; Fan, Jing; Swanson, Amy; Weitlauf, Amy; Warren, Zachary; Sarkar, Nilanjan

2017-01-01

Autism Spectrum Disorder (ASD) is a highly prevalent neurodevelopmental disorder with enormous individual and social cost. In this paper, a novel virtual reality (VR)-based driving system was introduced to teach driving skills to adolescents with ASD. This driving system is capable of gathering eye gaze, electroencephalography, and peripheral physiology data in addition to driving performance data. The objective of this paper is to fuse multimodal information to measure cognitive load during driving such that driving tasks can be individualized for optimal skill learning. Individualization of ASD intervention is an important criterion due to the spectrum nature of the disorder. Twenty adolescents with ASD participated in our study and the data collected were used for systematic feature extraction and classification of cognitive loads based on five well-known machine learning methods. Subsequently, three information fusion schemes-feature level fusion, decision level fusion and hybrid level fusion-were explored. Results indicate that multimodal information fusion can be used to measure cognitive load with high accuracy. Such a mechanism is essential since it will allow individualization of driving skill training based on cognitive load, which will facilitate acceptance of this driving system for clinical use and eventual commercialization.

40 CFR 194.22 - Quality assurance.

Code of Federal Regulations, 2014 CFR

2014-07-01

... expected; and (5) Data comparability, i.e., a measure of the confidence with which one data set can be... collection of data and information used to support compliance application(s); and (viii) Other systems... compliance application shall include information which demonstrates that data and information collected prior...

40 CFR 194.22 - Quality assurance.

Code of Federal Regulations, 2013 CFR

2013-07-01

... expected; and (5) Data comparability, i.e., a measure of the confidence with which one data set can be... collection of data and information used to support compliance application(s); and (viii) Other systems... compliance application shall include information which demonstrates that data and information collected prior...

40 CFR 194.22 - Quality assurance.

Code of Federal Regulations, 2012 CFR

2012-07-01

... expected; and (5) Data comparability, i.e., a measure of the confidence with which one data set can be... collection of data and information used to support compliance application(s); and (viii) Other systems... compliance application shall include information which demonstrates that data and information collected prior...

40 CFR 194.22 - Quality assurance.

Code of Federal Regulations, 2011 CFR

2011-07-01

... expected; and (5) Data comparability, i.e., a measure of the confidence with which one data set can be... collection of data and information used to support compliance application(s); and (viii) Other systems... compliance application shall include information which demonstrates that data and information collected prior...

Measuring Gaussian quantum information and correlations using the Rényi entropy of order 2.

PubMed

Adesso, Gerardo; Girolami, Davide; Serafini, Alessio

2012-11-09

We demonstrate that the Rényi-2 entropy provides a natural measure of information for any multimode Gaussian state of quantum harmonic systems, operationally linked to the phase-space Shannon sampling entropy of the Wigner distribution of the state. We prove that, in the Gaussian scenario, such an entropy satisfies the strong subadditivity inequality, a key requirement for quantum information theory. This allows us to define and analyze measures of Gaussian entanglement and more general quantum correlations based on such an entropy, which are shown to satisfy relevant properties such as monogamy.

Diagnosis Related Groups as a Casemix/Management Tool for Hospice Patients

PubMed Central

Johnson-Hürzeler, R.; Leary, Robert J.; Hill, Claire L.

1983-01-01

to control the costs of care, and to remain prepared for changes in reimbursement methodologies, health care organizations are beginning to analyze their casemix and their costs per case of providing care. Increasing importance is thus assigned to the search for valid casemix measures and to the construction of information systems which will support casemix investigations. After two years of information systems development, The Connecticut Hospice has begun its search for casemix measures that are applicable to the care of the dying. In this paper, we present our findings on the application of one casemix measure - the DRG - in the specialized area of nonsurgical care of the terminally ill.

Health Professionals' Use of Online Information Retrieval Systems and Online Evidence.

PubMed

Lialiou, Paschalina; Pavlopoulou, Ioanna; Mantas, John

2016-01-01

Across-sectional survey was designed to determine health professionals' awareness and usage of online evidence retrieval systems in clinical practice. A questionnaire was used to measure professionals' behavior and utilization of online evidences, as well as, reasons and barriers on information retrieval. 439 nurses and physicians from public and private hospitals in Greece formulate the study's sample. The two most common reasons that individuals are using online information systems were for writing scientific manuscripts or filling a knowledge gap. A positive correlation was found between participants with postgraduate studies and information system usage. The majority of them (90,6%) believe that online information systems improves patient care and 67,6% of them had their own experiences on this. More support is needed to nurses and physicians in order to use the online evidence and as a result to improve the provided care and practices.

An Informatics Blueprint for Healthcare Quality Information Systems

PubMed Central

Niland, Joyce C.; Rouse, Layla; Stahl, Douglas C.

2006-01-01

There is a critical gap in our nation's ability to accurately measure and manage the quality of medical care. A robust healthcare quality information system (HQIS) has the potential to address this deficiency through the capture, codification, and analysis of information about patient treatments and related outcomes. Because non-technical issues often present the greatest challenges, this paper provides an overview of these socio-technical issues in building a successful HQIS, including the human, organizational, and knowledge management (KM) perspectives. Through an extensive literature review and direct experience in building a practical HQIS (the National Comprehensive Cancer Network Outcomes Research Database system), we have formulated an “informatics blueprint” to guide the development of such systems. While the blueprint was developed to facilitate healthcare quality information collection, management, analysis, and reporting, the concepts and advice provided may be extensible to the development of other types of clinical research information systems. PMID:16622161

Analogy between gambling and measurement-based work extraction

NASA Astrophysics Data System (ADS)

Vinkler, Dror A.; Permuter, Haim H.; Merhav, Neri

2016-04-01

In information theory, one area of interest is gambling, where mutual information characterizes the maximal gain in wealth growth rate due to knowledge of side information; the betting strategy that achieves this maximum is named the Kelly strategy. In the field of physics, it was recently shown that mutual information can characterize the maximal amount of work that can be extracted from a single heat bath using measurement-based control protocols, i.e. using ‘information engines’. However, to the best of our knowledge, no relation between gambling and information engines has been presented before. In this paper, we briefly review the two concepts and then demonstrate an analogy between gambling, where bits are converted into wealth, and information engines, where bits representing measurements are converted into energy. From this analogy follows an extension of gambling to the continuous-valued case, which is shown to be useful for investments in currency exchange rates or in the stock market using options. Moreover, the analogy enables us to use well-known methods and results from one field to solve problems in the other. We present three such cases: maximum work extraction when the probability distributions governing the system and measurements are unknown, work extraction when some energy is lost in each cycle, e.g. due to friction, and an analysis of systems with memory. In all three cases, the analogy enables us to use known results in order to obtain new ones.

Measuring effectiveness of electronic medical records systems: towards building a composite index for benchmarking hospitals.

PubMed

Otieno, George Ochieng; Hinako, Toyama; Motohiro, Asonuma; Daisuke, Koide; Keiko, Naitoh

2008-10-01

Many hospitals are currently in the process of developing and implementing electronic medical records (EMR) systems. This is a critical time for developing a framework that can measure and allow for comparison the effectiveness of EMR systems across hospitals that have implemented these systems. The motivation for this study comes from the realization that there is limited research on the understanding of the effectiveness of EMR systems, and a lack of appropriate reference theoretical framework for measuring the effectiveness of EMR systems. In this paper, we propose a conceptual framework for generating a composite index (CI) for measuring the effectiveness of EMR systems in hospitals. Data used to test the framework and associated research objectives were derived from a cross-sectional survey of five stakeholders of EMR systems including chief medical officers, chief nursing officers, chief information officers, doctors and nurses in 20 Japanese hospitals. Using statistical means of standardization and principal component analysis (PCA) procedure, CI was developed by summing up the scores of four dimensions-system quality, information quality, use and user satisfaction. The process included formulating items for each dimension, condensing the data into factors relevant to the dimension and calculating the CI by summing up the product of each dimension with its respective principal component score coefficient. The Cronbach's alpha for the four dimensions used in developing CI was .843. Validation of CI revealed that it was correlated to internal dimensions (system quality, R=.828; information quality, R=.909; use, R=.969; and user satisfaction, R=.679) and to external factors (JAHIS level, R=.832 and patient safety culture, R=.585). These results suggest that CI could be a reliable and valid measure of the effectiveness of EMR systems in the responding hospitals. On benchmarking of hospitals, 30.0% (6/20) of the responding hospitals performed less than satisfactory on CI and that majority of the hospitals performed poorly on user satisfaction. CI has provided a standard way, through quantitative means, of measuring, comparing and categorizing the effectiveness of EMR systems in hospitals. CI can be a powerful tool for benchmarking the effectiveness of EMR systems in hospitals in ways that can guide hospitals in computerization process as well as benchmark their systems against other hospitals.

Error Correction: a Proposal for a Standard

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kirkham, Harold; Riepnieks, Artis; So, Eddy

Some of the errors in transducers such as instrument transformers can be corrected as part of the digital processing for the measurement. The transducer can be characterized on such a way that allows the TEDS of IEEE Std 1451 to transfer the information to the measurement system. A modification would allow the measurement system to perform a high-quality self-calibration whenever a transducer was replaced.

Interactive water monitoring system accessible by cordless telephone

NASA Astrophysics Data System (ADS)

Volpicelli, Richard; Andeweg, Pierre; Hagar, William G.

1985-12-01

A battery-operated, microcomputer-controlled monitoring device linked with a cordless telephone has been developed for remote measurements. This environmental sensor is self-contained and collects and processes data according to the information sent to its on-board computer system. An RCA model 1805 microprocessor forms the basic controller with a program encoded in memory for data acquisition and analysis. Signals from analog sensing devices used to monitor the environment are converted into digital signals and stored in random access memory of the microcomputer. This remote sensing system is linked to the laboratory by means of a cordless telephone whose base unit is connected to regular telephone lines. This offshore sensing system is simply accessed by a phone call originating from a computer terminal in the laboratory. Data acquisition is initiated upon request: Information continues to be processed and stored until the computer is reprogrammed by another phone call request. Information obtained may be recalled by a phone call after the desired environmental measurements are finished or while they are in progress. Data sampling parameters may be reset at any time, including in the middle of a measurement cycle. The range of the system is limited only by existing telephone grid systems and by the transmission characteristics of the cordless phone used as a communications link. This use of a cordless telephone, coupled with the on-board computer system, may be applied to other field studies requiring data transfer between an on-site analytical system and the laboratory.

Development of Human Factors Guidlines for Advanced Traveler Information Systems and Commercial Vehicle Operations: Investigation of ATIS Function Transition and the Effects of an In-Vehicle ATIS on Driver Performance

DOT National Transportation Integrated Search

1999-12-01

The objective of the first experiment reported here was to measure the cognitive demands associated with transitioning across Advanced Traveler Information System (ATIS) functions. This required the development of both objective and subjective indice...

Implications of sampling design and sample size for national carbon accounting systems

Treesearch

Michael Köhl; Andrew Lister; Charles T. Scott; Thomas Baldauf; Daniel Plugge

2011-01-01

Countries willing to adopt a REDD regime need to establish a national Measurement, Reporting and Verification (MRV) system that provides information on forest carbon stocks and carbon stock changes. Due to the extensive areas covered by forests the information is generally obtained by sample based surveys. Most operational sampling approaches utilize a combination of...

The Interplay between Information and Control Theory within Interactive Decision-Making Problems

ERIC Educational Resources Information Center

Gorantla, Siva Kumar

2012-01-01

The context for this work is two-agent team decision systems. An "agent" is an intelligent entity that can measure some aspect of its environment, process information and possibly influence the environment through its action. In a collaborative two-agent team decision system, the agents can be coupled by noisy or noiseless interactions…

Examination of the Nonlinear Dynamic Systems Associated with Science Student Cognition While Engaging in Science Information Processing

ERIC Educational Resources Information Center

Lamb, Richard; Cavagnetto, Andy; Akmal, Tariq

2016-01-01

A critical problem with the examination of learning in education is that there is an underlying assumption that the dynamic systems associated with student information processing can be measured using static linear assessments. This static linear approach does not provide sufficient ability to characterize learning. Much of the modern research…

Measuring the Level of Security in the K-12 IT Environment in Southern California

ERIC Educational Resources Information Center

Brown, Brandon R.

2016-01-01

Kindergartens through twelfth grade institutions (K-12) are susceptible to unauthorized breaches to the security of their networked systems. These systems house sensitive information for students and staff alike. K-12 organizations face a significant risk for loss of this information that can damage reputation and pose liability. Perpetrators have…

Information systems in ADOT : an analysis of intra-function flow, decision support needs, existing systems utility and user attitudes. Final report, volume 3 : appendices

DOT National Transportation Integrated Search

1985-03-01

A report is offered on a study of the information activities within the Right-of-Way section of ADOT. The objectives of the study were to adapt and apply techniques to measure user-perceived needs, satisfaction and utility of services provided Right-...

Information systems in ADOT : an analysis of intra-function flow, decision support needs, existing systems utility and user attitudes. Final report, volume 1

DOT National Transportation Integrated Search

1985-03-01

A report is offered on a study of the information activities within the Right-of-Way section of ADOT. The objectives of the study were to adapt and apply techniques to measure user-perceived needs, satisfaction and utility of services provided Right-...

Information-geometric measures as robust estimators of connection strengths and external inputs.

PubMed

Tatsuno, Masami; Fellous, Jean-Marc; Amari, Shun-Ichi

2009-08-01

Information geometry has been suggested to provide a powerful tool for analyzing multineuronal spike trains. Among several advantages of this approach, a significant property is the close link between information-geometric measures and neural network architectures. Previous modeling studies established that the first- and second-order information-geometric measures corresponded to the number of external inputs and the connection strengths of the network, respectively. This relationship was, however, limited to a symmetrically connected network, and the number of neurons used in the parameter estimation of the log-linear model needed to be known. Recently, simulation studies of biophysical model neurons have suggested that information geometry can estimate the relative change of connection strengths and external inputs even with asymmetric connections. Inspired by these studies, we analytically investigated the link between the information-geometric measures and the neural network structure with asymmetrically connected networks of N neurons. We focused on the information-geometric measures of orders one and two, which can be derived from the two-neuron log-linear model, because unlike higher-order measures, they can be easily estimated experimentally. Considering the equilibrium state of a network of binary model neurons that obey stochastic dynamics, we analytically showed that the corrected first- and second-order information-geometric measures provided robust and consistent approximation of the external inputs and connection strengths, respectively. These results suggest that information-geometric measures provide useful insights into the neural network architecture and that they will contribute to the study of system-level neuroscience.

The effect of misclassification errors on case mix measurement.

PubMed

Sutherland, Jason M; Botz, Chas K

2006-12-01

Case mix systems have been implemented for hospital reimbursement and performance measurement across Europe and North America. Case mix categorizes patients into discrete groups based on clinical information obtained from patient charts in an attempt to identify clinical or cost difference amongst these groups. The diagnosis related group (DRG) case mix system is the most common methodology, with variants adopted in many countries. External validation studies of coding quality have confirmed that widespread variability exists between originally recorded diagnoses and re-abstracted clinical information. DRG assignment errors in hospitals that share patient level cost data for the purpose of establishing cost weights affects cost weight accuracy. The purpose of this study is to estimate bias in cost weights due to measurement error of reported clinical information. DRG assignment error rates are simulated based on recent clinical re-abstraction study results. Our simulation study estimates that 47% of cost weights representing the least severe cases are over weight by 10%, while 32% of cost weights representing the most severe cases are under weight by 10%. Applying the simulated weights to a cross-section of hospitals, we find that teaching hospitals tend to be under weight. Since inaccurate cost weights challenges the ability of case mix systems to accurately reflect patient mix and may lead to potential distortions in hospital funding, bias in hospital case mix measurement highlights the role clinical data quality plays in hospital funding in countries that use DRG-type case mix systems. Quality of clinical information should be carefully considered from hospitals that contribute financial data for establishing cost weights.

Development of guidelines for the definition of the relavant information content in data classes

NASA Technical Reports Server (NTRS)

Schmitt, E.

1973-01-01

The problem of experiment design is defined as an information system consisting of information source, measurement unit, environmental disturbances, data handling and storage, and the mathematical analysis and usage of data. Based on today's concept of effective computability, general guidelines for the definition of the relevant information content in data classes are derived. The lack of a universally applicable information theory and corresponding mathematical or system structure is restricting the solvable problem classes to a small set. It is expected that a new relativity theory of information, generally described by a universal algebra of relations will lead to new mathematical models and system structures capable of modeling any well defined practical problem isomorphic to an equivalence relation at any corresponding level of abstractness.

Information Processing in Living Systems

NASA Astrophysics Data System (ADS)

Tkačik, Gašper; Bialek, William

2016-03-01

Life depends as much on the flow of information as on the flow of energy. Here we review the many efforts to make this intuition precise. Starting with the building blocks of information theory, we explore examples where it has been possible to measure, directly, the flow of information in biological networks, or more generally where information-theoretic ideas have been used to guide the analysis of experiments. Systems of interest range from single molecules (the sequence diversity in families of proteins) to groups of organisms (the distribution of velocities in flocks of birds), and all scales in between. Many of these analyses are motivated by the idea that biological systems may have evolved to optimize the gathering and representation of information, and we review the experimental evidence for this optimization, again across a wide range of scales.

Measuring complete quantum states with a single observable

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peng Xinhua; Suter, Dieter; Du Jiangfeng

2007-10-15

Experimental determination of an unknown quantum state usually requires several incompatible measurements. However, it is also possible to determine the full quantum state from a single, repeated measurement. For this purpose, the quantum system whose state is to be determined is first coupled to a second quantum system (the 'assistant') in such a way that part of the information in the quantum state is transferred to the assistant. The actual measurement is then performed on the enlarged system including the original system and the assistant. We discuss in detail the requirements of this procedure and experimentally implement it on amore » simple quantum system consisting of nuclear spins.« less

Foot Plantar Pressure Measurement System: A Review

PubMed Central

Razak, Abdul Hadi Abdul; Zayegh, Aladin; Begg, Rezaul K.; Wahab, Yufridin

2012-01-01

Foot plantar pressure is the pressure field that acts between the foot and the support surface during everyday locomotor activities. Information derived from such pressure measures is important in gait and posture research for diagnosing lower limb problems, footwear design, sport biomechanics, injury prevention and other applications. This paper reviews foot plantar sensors characteristics as reported in the literature in addition to foot plantar pressure measurement systems applied to a variety of research problems. Strengths and limitations of current systems are discussed and a wireless foot plantar pressure system is proposed suitable for measuring high pressure distributions under the foot with high accuracy and reliability. The novel system is based on highly linear pressure sensors with no hysteresis. PMID:23012576

Pilot study: Assessing repeatability of the EcoWalk platform resistive pressure sensors to measure plantar pressure during barefoot standing

NASA Astrophysics Data System (ADS)

Zequera, Martha; Perdomo, Oscar; Wilches, Carlos; Vizcaya, Pedro

2013-06-01

Plantar pressure provides useful information to assess the feet's condition. These systems have emerged as popular tools in clinical environment. These systems present errors and no compensation information is presented by the manufacturer, leading to uncertainty in the measurements. Ten healthy subjects, 5 females and 5 males, were recruited. Lateral load distribution, antero-posterior load distribution, average pressure, contact area, and force were recorded. The aims of this study were to assess repeatability of the EcoWalk system and identify the range of pressure values observed in the normal foot. The coefficient of repeatability was less than 4% for all parameters considered.

Impact of jammer side information on the performance of anti-jam systems

NASA Astrophysics Data System (ADS)

Lim, Samuel

1992-03-01

The Chernoff bound parameter, D, provides a performance measure for all coded communication systems. D can be used to determine upper-bounds on bit error probabilities (BEPs) of Viterbi decoded convolutional codes. The impact on BEP bounds of channel measurements that provide additional side information can also be evaluated with D. This memo documents the results of a Chernoff bound parameter evaluation in optimum partial-band noise jamming (OPBNJ) for both BPSK and DPSK modulation schemes. Hard and soft quantized receivers, with and without jammer side information (JSI), were examined. The results of this analysis indicate that JSI does improve decoding performance. However, a knowledge of jammer presence alone achieves a performance level comparable to soft decision decoding with perfect JSI. Furthermore, performance degradation due to the lack of JSI can be compensated for by increasing the number of levels of quantization. Therefore, an anti-jam system without JSI can be made to perform almost as well as a system with JSI.

Simulation and Assessment of a Ku-Band Full-Polarized Radar Scatterometer for Ocean Surface Vector Wind Measurement

NASA Astrophysics Data System (ADS)

Dong, X.; Lin, W.; Zhu, D.; Song, Z.

2011-12-01

Spaceborne radar scatterometry is the most important tool for global ocean surface wind vector (OSVW) measurement. Performances under condition of high-wind speed and accuracy of wind direction retrievals are two very important concerns for the development of OSVW measurement techniques by radar scatterometry. Co-polarized sigma 0 measurements are employed, for all the spaceborne radar scatterometers developed in past, and future planned missions. The main disadvantages of co-polarized only radar scatterometers for OSVW measurement are: firstly, wind vector retrieval performances varies with the position of the wind vector cells (WVC) within the swath, where WVCs with small incident angels with weaker modulation effect between sigma0 and azimuth incident angle, and the WVCs located in the outer part of the swath with lower signal-to-noise ratio and lower radiometric accuracies, have worse retrieval performances; secondly, for co-polarization measurements, Sigma 0 is the even function of the azimuth incident angle with respect to the real wind direction, which can results in directional ambiguity, and more additional information is need for the ambiguity removal. Theoretical and experimental results show that the cross-polarization measurement can provide complementary directional information to the co-polarization measurements, which can provide useful improvement to the wind vector retrieval performances. In this paper, the simulation and performance assessment of a full-polarized Ku-band radar scatterometer are provided. Some important conclusions are obtained: (1) Compared with available dual co-polarized radar scatterometer, the introduction of cross-polarization information can significantly improve the OSVW retrieval accuracies, where a relatively identical performance can be obtained within the whole swath. Simulation show that without significantly power increase, system design based on rotating-pencil beam design has much better performances than rotation fan-beam system due to its higher antenna gain and signal-to-noise ratio; (2) The performances of the full-polarized measurement, where all the 9 element covariant coefficient elements will be measurement, only have a little improvement compared with the "dual-co-polarization+HVVV" design, which is because of the almost identical characteristics of HVVV and VHHH measurement due to reciprocity; (3) The propagation error of rotation pencil-beam system is obviously much smaller than that of the rotation fan-beam system, which is due to the significant difference of antenna gains and signal-to-noise ratios; (4) Introduction of cross-polarized HVVV measurement can lead to almost identical wind direction retrieval performance for both the rotation pencil-beam and rotation fan-beam systems, which show that the cross-polarization information can significantly improve the wind direction retrieval performances by increasing the number of look angles, compared with the available fixed-fan-beam systems.

Optical position measurement for a Large Gap Magnetic Suspension System

NASA Technical Reports Server (NTRS)

Welch, Sharon S.; Shelton, Kevin J.; Clemmons, James I.

1991-01-01

This paper describes the design of an optical position measurement system which is being built as part of the NASA Langley Large Gap Magnetic Suspension System (LGMSS). The LGMSS is a five degree-of-freedom, large-gap magnetic suspension system which is being built for Langley Research Center as part of the Advanced Controls Test Facility (ACTF). The LGMSS consists of a planar array of electromagnets which levitate and position a cylindrically shaped model containing a permanent magnet core. The optical position measurement system provides information on the location and orientation of the model to the LGMSS control system to stabilize levitation of the model.

Gradient microfluidics enables rapid bacterial growth inhibition testing.

PubMed

Li, Bing; Qiu, Yong; Glidle, Andrew; McIlvenna, David; Luo, Qian; Cooper, Jon; Shi, Han-Chang; Yin, Huabing

2014-03-18

Bacterial growth inhibition tests have become a standard measure of the adverse effects of inhibitors for a wide range of applications, such as toxicity testing in the medical and environmental sciences. However, conventional well-plate formats for these tests are laborious and provide limited information (often being restricted to an end-point assay). In this study, we have developed a microfluidic system that enables fast quantification of the effect of an inhibitor on bacteria growth and survival, within a single experiment. This format offers a unique combination of advantages, including long-term continuous flow culture, generation of concentration gradients, and single cell morphology tracking. Using Escherichia coli and the inhibitor amoxicillin as one model system, we show excellent agreement between an on-chip single cell-based assay and conventional methods to obtain quantitative measures of antibiotic inhibition (for example, minimum inhibition concentration). Furthermore, we show that our methods can provide additional information, over and above that of the standard well-plate assay, including kinetic information on growth inhibition and measurements of bacterial morphological dynamics over a wide range of inhibitor concentrations. Finally, using a second model system, we show that this chip-based systems does not require the bacteria to be labeled and is well suited for the study of naturally occurring species. We illustrate this using Nitrosomonas europaea, an environmentally important bacteria, and show that the chip system can lead to a significant reduction in the period required for growth and inhibition measurements (<4 days, compared to weeks in a culture flask).

System for selecting relevant information for decision support.

PubMed

Kalina, Jan; Seidl, Libor; Zvára, Karel; Grünfeldová, Hana; Slovák, Dalibor; Zvárová, Jana

2013-01-01

We implemented a prototype of a decision support system called SIR which has a form of a web-based classification service for diagnostic decision support. The system has the ability to select the most relevant variables and to learn a classification rule, which is guaranteed to be suitable also for high-dimensional measurements. The classification system can be useful for clinicians in primary care to support their decision-making tasks with relevant information extracted from any available clinical study. The implemented prototype was tested on a sample of patients in a cardiological study and performs an information extraction from a high-dimensional set containing both clinical and gene expression data.

Information System for Molecular Spectroscopy: 7-Systematization of Information Resources on the Main Isotopologue of the Methanol Molecule

NASA Astrophysics Data System (ADS)

Akhlestin, A. Yu.; Voronina, S. S.; Privezentsev, A. I.; Rodimova, O. B.; Fazliev, A. Z.

2017-04-01

Systematization of information resources in quantitative spectroscopy is demonstrated using the methanol molecule as an example and applying the facilities of the W@DIS information system. The choice of quantum numbers for a methanol state is explained; brief descriptions of about 40 publications containing spectral characteristics of methanol are given. The interfaces used for the analysis of consistency of wavenumbers in all data sources are described, as well as the interface of the application for forming the list of measured transitions.

Anonymous indexing of health conditions for a similarity measure.

PubMed

Song, Insu; Marsh, Nigel V

2012-07-01

A health social network is an online information service which facilitates information sharing between closely related members of a community with the same or a similar health condition. Over the years, many automated recommender systems have been developed for social networking in order to help users find their communities of interest. For health social networking, the ideal source of information for measuring similarities of patients is the medical information of the patients. However, it is not desirable that such sensitive and private information be shared over the Internet. This is also true for many other security sensitive domains. A new information-sharing scheme is developed where each patient is represented as a small number of (possibly disjoint) d-words (discriminant words) and the d-words are used to measure similarities between patients without revealing sensitive personal information. The d-words are simple words like "food,'' and thus do not contain identifiable personal information. This makes our method an effective one-way hashing of patient assessments for a similarity measure. The d-words can be easily shared on the Internet to find peers who might have similar health conditions.

Global Precipitation Measurement: GPM Microwave Imager (GMI) Algorithm Development Approach

NASA Technical Reports Server (NTRS)

Stocker, Erich Franz

2009-01-01

This slide presentation reviews the approach to the development of the Global Precipitation Measurement algorithm. This presentation includes information about the responsibilities for the development of the algorithm, and the calibration. Also included is information about the orbit, and the sun angle. The test of the algorithm code will be done with synthetic data generated from the Precipitation Processing System (PPS).

A Novel Inlet System for On-line Chemical Analysis of Semi-Volatile Submicron Particulate Matter

NASA Astrophysics Data System (ADS)

Wisthaler, A.; Eichler, P.; Müller, M.

2015-12-01

Semi-volatile organic molecules bound to particles are difficult to measure, especially if they are reactive in nature. Any technique based on aerosol collection onto a substrate generates sampling artifacts due to surface reactions and ad- and desorption of semi-volatile analytes. On-line sampling without sample pre-collection, as for example implemented in the AMS, has greatly reduced many sampling artifacts. AMS measurements of organics do, however, suffer from the drawback that molecular-level information is, in most cases, lost during hard ionization events. As a consequence, only little speciated and thus mechanistically informative data on organic matter is obtained. PTR-ToF-MS is a well-established on-line measurement technique for gas-phase organics. Soft ionization via gas-phase hydronium ions preserves, to a large extent, molecular-level information and thus allows identifying organic compounds at an elemental composition level. We have recently developed a particle inlet system for PTR-ToF-MS instruments (doi:10.5194/amt-8-1353-2015). The CHARON ("Chemical Analysis of Aerosol On-line") inlet consists of a gas-phase denuder, an aerodynamic lens and a thermodesorption unit. In its latest version, it includes a heatable tube upstream of the denuder to form a thermodenuder. Over the last year, the CHARON PTR-ToF-MS system has been successfully used in a series of measurement campaigns to characterize i) POA emitted from a marine diesel engine, ii) SOA generated from the photo-oxidation of toluene, iii) SOA generated from the photo-oxidation of selected amines, iv) ambient aerosol in two major European cities and v) SOA generated from the photo-oxidation of biogenic VOCs. These measurements have demonstrated that the CHARON PTR-ToF-MS system i) generates on-line and real-time elemental composition information of semi-volatile organics in submicron particles (both POA and SOA), ii) detects 80-100 % of the organic mass as measured by the AMS and iii) generates volatility information of semi-volatile organics at an elemental composition level. Selected application examples will be shown.

Indoor Map Aided Wi-Fi Integrated Lbs on Smartphone Platforms

NASA Astrophysics Data System (ADS)

Yu, C.; El-Sheimy, N.

2017-09-01

In this research, an indoor map aided INS/Wi-Fi integrated location based services (LBS) applications is proposed and implemented on smartphone platforms. Indoor map information together with measurements from an inertial measurement unit (IMU) and Received Signal Strength Indicator (RSSI) value from Wi-Fi are collected to obtain an accurate, continuous, and low-cost position solution. The main challenge of this research is to make effective use of various measurements that complement each other without increasing the computational burden of the system. The integrated system in this paper includes three modules: INS, Wi-Fi (if signal available) and indoor maps. A cascade structure Particle/Kalman filter framework is applied to combine the different modules. Firstly, INS position and Wi-Fi fingerprint position integrated through Kalman filter for estimating positioning information. Then, indoor map information is applied to correct the error of INS/Wi-Fi estimated position through particle filter. Indoor tests show that the proposed method can effectively reduce the accumulation positioning errors of stand-alone INS systems, and provide stable, continuous and reliable indoor location service.

Entropy Based Feature Selection for Fuzzy Set-Valued Information Systems

NASA Astrophysics Data System (ADS)

Ahmed, Waseem; Sufyan Beg, M. M.; Ahmad, Tanvir

2018-06-01

In Set-valued Information Systems (SIS), several objects contain more than one value for some attributes. Tolerance relation used for handling SIS sometimes leads to loss of certain information. To surmount this problem, fuzzy rough model was introduced. However, in some cases, SIS may contain some real or continuous set-values. Therefore, the existing fuzzy rough model for handling Information system with fuzzy set-values needs some changes. In this paper, Fuzzy Set-valued Information System (FSIS) is proposed and fuzzy similarity relation for FSIS is defined. Yager's relative conditional entropy was studied to find the significance measure of a candidate attribute of FSIS. Later, using these significance values, three greedy forward algorithms are discussed for finding the reduct and relative reduct for the proposed FSIS. An experiment was conducted on a sample population of the real dataset and a comparison of classification accuracies of the proposed FSIS with the existing SIS and single-valued Fuzzy Information Systems was made, which demonstrated the effectiveness of proposed FSIS.

Acting to gain information: Real-time reasoning meets real-time perception

NASA Technical Reports Server (NTRS)

Rosenschein, Stan

1994-01-01

Recent advances in intelligent reactive systems suggest new approaches to the problem of deriving task-relevant information from perceptual systems in real time. The author will describe work in progress aimed at coupling intelligent control mechanisms to real-time perception systems, with special emphasis on frame rate visual measurement systems. A model for integrated reasoning and perception will be discussed, and recent progress in applying these ideas to problems of sensor utilization for efficient recognition and tracking will be described.

Using Information from the Electronic Health Record to Improve Measurement of Unemployment in Service Members and Veterans with mTBI and Post-Deployment Stress

PubMed Central

Dillahunt-Aspillaga, Christina; Finch, Dezon; Massengale, Jill; Kretzmer, Tracy; Luther, Stephen L.; McCart, James A.

2014-01-01

Objective The purpose of this pilot study is 1) to develop an annotation schema and a training set of annotated notes to support the future development of a natural language processing (NLP) system to automatically extract employment information, and 2) to determine if information about employment status, goals and work-related challenges reported by service members and Veterans with mild traumatic brain injury (mTBI) and post-deployment stress can be identified in the Electronic Health Record (EHR). Design Retrospective cohort study using data from selected progress notes stored in the EHR. Setting Post-deployment Rehabilitation and Evaluation Program (PREP), an in-patient rehabilitation program for Veterans with TBI at the James A. Haley Veterans' Hospital in Tampa, Florida. Participants Service members and Veterans with TBI who participated in the PREP program (N = 60). Main Outcome Measures Documentation of employment status, goals, and work-related challenges reported by service members and recorded in the EHR. Results Two hundred notes were examined and unique vocational information was found indicating a variety of self-reported employment challenges. Current employment status and future vocational goals along with information about cognitive, physical, and behavioral symptoms that may affect return-to-work were extracted from the EHR. The annotation schema developed for this study provides an excellent tool upon which NLP studies can be developed. Conclusions Information related to employment status and vocational history is stored in text notes in the EHR system. Information stored in text does not lend itself to easy extraction or summarization for research and rehabilitation planning purposes. Development of NLP systems to automatically extract text-based employment information provides data that may improve the understanding and measurement of employment in this important cohort. PMID:25541956

[Clinical effect of three dimensional human body scanning system BurnCalc in the evaluation of burn wound area].

PubMed

Lu, J; Wang, L; Zhang, Y C; Tang, H T; Xia, Z F

2017-10-20

Objective: To validate the clinical effect of three dimensional human body scanning system BurnCalc developed by our research team in the evaluation of burn wound area. Methods: A total of 48 burn patients treated in the outpatient department of our unit from January to June 2015, conforming to the study criteria, were enrolled in. For the first 12 patients, one wound on the limbs or torso was selected from each patient. The stability of the system was tested by 3 attending physicians using three dimensional human body scanning system BurnCalc to measure the area of wounds individually. For the following 36 patients, one wound was selected from each patient, including 12 wounds on limbs, front torso, and side torso, respectively. The area of wounds was measured by the same attending physician using transparency tracing method, National Institutes of Health (NIH) Image J method, and three dimensional human body scanning system BurnCalc, respectively. The time for getting information of 36 wounds by three methods was recorded by stopwatch. The stability among the testers was evaluated by the intra-class correlation coefficient (ICC). Data were processed with randomized blocks analysis of variance and Bonferroni test. Results: (1) Wound area of patients measured by three physicians using three dimensional human body scanning system BurnCalc was (122±95), (121±95), and (123±96) cm(2,) respectively, and there was no statistically significant difference among them ( F =1.55, P >0.05). The ICC among 3 physicians was 0.999. (2) The wound area of limbs of patients measured by transparency tracing method, NIH Image J method, and three dimensional human body scanning system BurnCalc was (84±50), (76±46), and (84±49) cm(2,) respectively. There was no statistically significant difference in the wound area of limbs of patients measured by transparency tracing method and three dimensional human body scanning system BurnCalc ( P >0.05). The wound area of limbs of patients measured by NIH Image J method was smaller than that measured by transparency tracing method and three dimensional human body scanning system BurnCalc (with P values below 0.05). There was no statistically significant difference in the wound area of front torso of patients measured by transparency tracing method, NIH Image J method, and three dimensional human body scanning system BurnCalc ( F =0.33, P >0.05). The wound area of side torso of patients measured by transparency tracing method, NIH Image J method, and three dimensional human body scanning system BurnCalc was (169±88), (150±80), and (169±86) cm(2,) respectively. There was no statistically significant difference in the wound area of side torso of patients measured by transparency tracing method and three dimensional human body scanning system BurnCalc ( P >0.05). The wound area of side torso of patients measured by NIH Image J method was smaller than that measured by transparency tracing method and three dimensional human body scanning system BurnCalc (with P values below 0.05). (3) The time for getting information of wounds of patients by transparency tracing method, NIH Image J method, and three dimensional human body scanning system BurnCalc was (77±14), (10±3), and (9±3) s, respectively. The time for getting information of wounds of patients by transparency tracing method was longer than that by NIH Image J method and three dimensional human body scanning system BurnCalc (with P values below 0.05). The time for getting information of wounds of patients by three dimensional human body scanning system BurnCalc was close to that by NIH Image J method ( P >0.05). Conclusions: The three dimensional human body scanning system BurnCalc is stable and can accurately evaluate the wound area on limbs and torso of burn patients.

Measurement-induced randomness and state-merging

NASA Astrophysics Data System (ADS)

Chakrabarty, Indranil; Deshpande, Abhishek; Chatterjee, Sourav

In this work we introduce the randomness which is truly quantum mechanical in nature arising as an act of measurement. For a composite classical system, we have the joint entropy to quantify the randomness present in the total system and that happens to be equal to the sum of the entropy of one subsystem and the conditional entropy of the other subsystem, given we know the first system. The same analogy carries over to the quantum setting by replacing the Shannon entropy by the von Neumann entropy. However, if we replace the conditional von Neumann entropy by the average conditional entropy due to measurement, we find that it is different from the joint entropy of the system. We call this difference Measurement Induced Randomness (MIR) and argue that this is unique of quantum mechanical systems and there is no classical counterpart to this. In other words, the joint von Neumann entropy gives only the total randomness that arises because of the heterogeneity of the mixture and we show that it is not the total randomness that can be generated in the composite system. We generalize this quantity for N-qubit systems and show that it reduces to quantum discord for two-qubit systems. Further, we show that it is exactly equal to the change in the cost quantum state merging that arises because of the measurement. We argue that for quantum information processing tasks like state merging, the change in the cost as a result of discarding prior information can also be viewed as a rise of randomness due to measurement.

Measurement of Sexual Health in the U.S.: An Inventory of Nationally Representative Surveys and Surveillance Systems

PubMed Central

Ivankovich, Megan B.; Leichliter, Jami S.; Douglas, John M.

2013-01-01

Objectives To identify opportunities within nationally representative surveys and surveillance systems to measure indicators of sexual health, we reviewed and inventoried existing data systems that include variables relevant to sexual health. Methods We searched for U.S. nationally representative surveys and surveillance systems that provided individual-level sexual health data. We assessed the methods of each data system and catalogued them by their measurement of the following domains of sexual health: knowledge, communication, attitudes, service access and utilization, sexual behaviors, relationships, and adverse health outcomes. Results We identified 18 U.S.-focused, nationally representative data systems: six assessing the general population, seven focused on special populations, and five addressing health outcomes. While these data systems provide a rich repository of information from which to assess national measures of sexual health, they present several limitations. Most importantly, apart from data on service utilization, routinely gathered, national data are currently focused primarily on negative aspects of sexual health (e.g., risk behaviors and adverse health outcomes) rather than more positive attributes (e.g., healthy communication and attitudes, and relationship quality). Conclusion Nationally representative data systems provide opportunities to measure a broad array of domains of sexual health. However, current measurement gaps indicate the need to modify existing surveys, where feasible and appropriate, and develop new tools to include additional indicators that address positive domains of sexual health of the U.S. population across the life span. Such data can inform the development of effective policy actions, services, prevention programs, and resource allocation to advance sexual health. PMID:23450886

A new measure based on degree distribution that links information theory and network graph analysis

PubMed Central

2012-01-01

Background Detailed connection maps of human and nonhuman brains are being generated with new technologies, and graph metrics have been instrumental in understanding the general organizational features of these structures. Neural networks appear to have small world properties: they have clustered regions, while maintaining integrative features such as short average pathlengths. Results We captured the structural characteristics of clustered networks with short average pathlengths through our own variable, System Difference (SD), which is computationally simple and calculable for larger graph systems. SD is a Jaccardian measure generated by averaging all of the differences in the connection patterns between any two nodes of a system. We calculated SD over large random samples of matrices and found that high SD matrices have a low average pathlength and a larger number of clustered structures. SD is a measure of degree distribution with high SD matrices maximizing entropic properties. Phi (Φ), an information theory metric that assesses a system’s capacity to integrate information, correlated well with SD - with SD explaining over 90% of the variance in systems above 11 nodes (tested for 4 to 13 nodes). However, newer versions of Φ do not correlate well with the SD metric. Conclusions The new network measure, SD, provides a link between high entropic structures and degree distributions as related to small world properties. PMID:22726594

Classicality condition on a system observable in a quantum measurement and a relative-entropy conservation law

NASA Astrophysics Data System (ADS)

Kuramochi, Yui; Ueda, Masahito

2015-03-01

We consider the information flow on a system observable X corresponding to a positive-operator-valued measure under a quantum measurement process Y described by a completely positive instrument from the viewpoint of the relative entropy. We establish a sufficient condition for the relative-entropy conservation law which states that the average decrease in the relative entropy of the system observable X equals the relative entropy of the measurement outcome of Y , i.e., the information gain due to measurement. This sufficient condition is interpreted as an assumption of classicality in the sense that there exists a sufficient statistic in a joint successive measurement of Y followed by X such that the probability distribution of the statistic coincides with that of a single measurement of X for the premeasurement state. We show that in the case when X is a discrete projection-valued measure and Y is discrete, the classicality condition is equivalent to the relative-entropy conservation for arbitrary states. The general theory on the relative-entropy conservation is applied to typical quantum measurement models, namely, quantum nondemolition measurement, destructive sharp measurements on two-level systems, a photon counting, a quantum counting, homodyne and heterodyne measurements. These examples except for the nondemolition and photon-counting measurements do not satisfy the known Shannon-entropy conservation law proposed by Ban [M. Ban, J. Phys. A: Math. Gen. 32, 1643 (1999), 10.1088/0305-4470/32/9/012], implying that our approach based on the relative entropy is applicable to a wider class of quantum measurements.

European Natural Disaster Coordination and Information System for Aviation (EUNADICS-AV)

NASA Astrophysics Data System (ADS)

Wotawa, Gerhard; Hirtl, Marcus; Arnold, Delia; Katzler-Fuchs, Susanne; Pappalardo, Gelsomina; Mona, Lucia; Sofiev, Mikhail; de Leeuw, Gerrit; Theys, Nicolas; Brenot, Hugues; Plu, Matthieu; Rockitansky, Carl-Herbert; Eschbacher, Kurt; Apituley, Arnoud; Som de Cerff, Wim

2017-04-01

Commercial aviation is one of the key infrastructures of our modern world. Even short interruptions can cause economic damages summing up to the Billion-Euro range. As evident from the past, aviation shows vulnerability with regard to natural hazards. Safe flight operations, air traffic management and air traffic control is a shared responsibility of EUROCONTROL, national authorities, airlines and pilots. All stakeholders have one common goal, namely to warrant and maintain the safety of flight crews and passengers. Currently, however, there is a significant gap in the Europe-wide availability of real time hazard measurement and monitoring information for airborne hazards describing "what, where, how much" in 3 dimensions, combined with a near-real-time European data analysis and assimilation system. This gap creates circumstances where various stakeholders in the system may base their decisions on different data and information. The H-2020 project EUNADICS-AV ("European Natural Disaster Coordination and Information System for Aviation"), started in October 2016, intends to close this gap in data and information availability, enabling all stakeholders in the aviation system to obtain fast, coherent and consistent information. The project intends to combine and harmonize data from satellite earth observation, ground based and airborne platforms, and to integrate them into state-of-the art data assimilation and analysis systems. Besides operational data sources, data from the research community are integrated as well. Hazards considered in the project include volcano eruptions, nuclear accidents and events, and forest fires. The availability of consistent and coherent data analysis fields based on all available measurements will greatly enhances our capability to respond to disasters effectively and efficiently, minimizing system downtimes and thus economic damage while maintaining the safety of millions of passengers.

Deterministic realization of collective measurements via photonic quantum walks.

PubMed

Hou, Zhibo; Tang, Jun-Feng; Shang, Jiangwei; Zhu, Huangjun; Li, Jian; Yuan, Yuan; Wu, Kang-Da; Xiang, Guo-Yong; Li, Chuan-Feng; Guo, Guang-Can

2018-04-12

Collective measurements on identically prepared quantum systems can extract more information than local measurements, thereby enhancing information-processing efficiency. Although this nonclassical phenomenon has been known for two decades, it has remained a challenging task to demonstrate the advantage of collective measurements in experiments. Here, we introduce a general recipe for performing deterministic collective measurements on two identically prepared qubits based on quantum walks. Using photonic quantum walks, we realize experimentally an optimized collective measurement with fidelity 0.9946 without post selection. As an application, we achieve the highest tomographic efficiency in qubit state tomography to date. Our work offers an effective recipe for beating the precision limit of local measurements in quantum state tomography and metrology. In addition, our study opens an avenue for harvesting the power of collective measurements in quantum information-processing and for exploring the intriguing physics behind this power.

48 CFR 1552.211-80 - Data standards for the transmission of laboratory measurement results.

Code of Federal Regulations, 2010 CFR

2010-10-01

... this contract. Copies of the Order may be obtained by written request to: Office of Information Resources Management, Information Management and Systems Division, Mail Code (3404), Ariel Rios Building...

48 CFR 1552.211-80 - Data standards for the transmission of laboratory measurement results.

Code of Federal Regulations, 2012 CFR

2012-10-01

... this contract. Copies of the Order may be obtained by written request to: Office of Information Resources Management, Information Management and Systems Division, Mail Code (3404), Ariel Rios Building...

48 CFR 1552.211-80 - Data standards for the transmission of laboratory measurement results.

Code of Federal Regulations, 2011 CFR

2011-10-01

... this contract. Copies of the Order may be obtained by written request to: Office of Information Resources Management, Information Management and Systems Division, Mail Code (3404), Ariel Rios Building...

76 FR 50723 - Notice of Proposed Information Collection Requests

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-16

... Fund). This is a competitive grant program. The purpose of the program is to encourage and reward... workplace; (b) building data systems that measure student success and inform teachers and principals in how...

Next Generation Performance Monitoring Data Needs for Nevada DOT

DOT National Transportation Integrated Search

2014-12-24

This report examines state-of-practice for performance measurement and focuses on federal requirements for traveler information mandated by SAFETEA-LU Section 1201 Real-Time System Management Information Program. Guidance for November 2016 compliance...

Field trial of the enhanced data authentication system (EDAS)

DOE PAGES

Thomas, Maikael A.; Hymel, Ross W.; Baldwin, George; ...

2016-11-01

The Enhanced Data Authentication System (EDAS) is means to securely branch information from an existing measurement system or data stream to a secondary observer. In an international nuclear safeguards context, the EDAS connects to operator instrumentation, and provides a cryptographically secure copy of the information for a safeguards inspectorate. However, this novel capability could be a valuable complement to inspector-owned safeguards instrumentation, offering context that is valuable for anomaly resolution and contingency.

Transportation performance measures for outcome based system management and monitoring.

DOT National Transportation Integrated Search

2014-09-01

The Oregon Department of Transportation (ODOT) is mature in its development and use of : performance measures, however there was not a standard approach for selecting measures nor : evaluating if existing ones were used to inform decision-making. Thi...

Multiscale analysis of information dynamics for linear multivariate processes.

PubMed

Faes, Luca; Montalto, Alessandro; Stramaglia, Sebastiano; Nollo, Giandomenico; Marinazzo, Daniele

2016-08-01

In the study of complex physical and physiological systems represented by multivariate time series, an issue of great interest is the description of the system dynamics over a range of different temporal scales. While information-theoretic approaches to the multiscale analysis of complex dynamics are being increasingly used, the theoretical properties of the applied measures are poorly understood. This study introduces for the first time a framework for the analytical computation of information dynamics for linear multivariate stochastic processes explored at different time scales. After showing that the multiscale processing of a vector autoregressive (VAR) process introduces a moving average (MA) component, we describe how to represent the resulting VARMA process using statespace (SS) models and how to exploit the SS model parameters to compute analytical measures of information storage and information transfer for the original and rescaled processes. The framework is then used to quantify multiscale information dynamics for simulated unidirectionally and bidirectionally coupled VAR processes, showing that rescaling may lead to insightful patterns of information storage and transfer but also to potentially misleading behaviors.

Thruster Plume Plasma Diagnostics: A Ground Chamber Experiment for a 2-Kilowatt Arcjet

NASA Technical Reports Server (NTRS)

Galofaro, Joel T.; Vayner, Boris V.; Hillard, G. Barry; Chornak, Michael T.

2005-01-01

Although detailed near field (0 to 3 cm) information regarding the exhaust plume of a two kilowatt arc jet is available (refs. 1 to 6), there is virtually little or no information (outside of theoretical extrapolations) available concerning the far field (2.6 to 6.1 m). Furthermore real information about the plasma at distances between (3 to 6 m) is of critical importance to high technology satellite companies in understanding the effect of arc jet plume exhausts on space based power systems. It is therefore of utmost importance that one understands the exact nature of the interaction between the arc jet plume, the spacecraft power system and the surrounding electrical plasma environment. A good first step in understanding the nature of the interactions lies in making the needed plume parameter measurements in the far field. All diagnostic measurements are performed inside a large vacuum system (12 m diameter by 18 m high) with a full scale arc jet and solar array panel in the required flight configuration geometry. Thus, necessary information regarding the plume plasma parameters in the far field is obtained. Measurements of the floating potential, the plasma potential, the electron temperature, number density, density distribution, debye length, and plasma frequency are obtained at various locations about the array (at vertical distances from the arc jet nozzle: 2.6, 2.7, 2.8, 3.2, 3.6, 4.0, 4.9, 5.0, 5.4, 5.75, and 6.14 m). Plasma diagnostic parameters are measured for both the floating and grounded configurations of the arc jet anode and array. Spectroscopic optical measurements are then acquired in close proximity to the nozzle, and contamination measurements are made in the vicinity of the array utilizing a mass spectrometer and two Quartz Crystal Microbalances (QCM's).

Development of a simultaneous SANS / FTIR measuring system and its application to polymer cocrystals

NASA Astrophysics Data System (ADS)

Kaneko, F.; Seto, N.; Sato, S.; Radulescu, A.; Schiavone, M. M.; Allgaier, J.; Ute, K.

2016-09-01

In order to provide plenty of structure information which would assist in the analysis and interpretation of small angle neutron scattering (SANS) profile, a novel method for the simultaneous time-resolved measurement of SANS and Fourier transform infrared (FTIR) spectroscopy has been developed. The method was realized by building a device consisting of a portable FTIR spectrometer and an optical system equipped with two aluminum coated quartz plates that are fully transparent to neutron beams but play as mirrors for infrared radiation. The optical system allows both a neutron beam and an infrared beam pass through the same position of a test specimen coaxially. The device was installed on a small angle neutron diffractometer, KWS2 of the Jülich Centre for Neutron Science (JCNS) outstation at Heinz Maier-Leibnitz Center (MLZ) in Garching, Germany. In order to check the performance of this simultaneous measuring system, the structural changes in the cocrystals of syndiotactic polystyrene during the course of heating were followed. It has been confirmed that FTIR spectra measured in parallel are able to provide information about the behavior of each component and also useful to grasp in real time what is actually happening in the sample system.

Reusing Information Management Services for Recommended Decadal Study Missions That Facilitate Aerosol and Cloud Studies

NASA Astrophysics Data System (ADS)

Alcott, G.; Kempler, S.; Lynnes, C.; Leptoukh, G.; Vollmer, B.; Berrick, S.

2008-12-01

NASA Earth Sciences Division (ESD), and its preceding Earth science organizations, has made great investments in the development and maintenance of data management systems, as well as information technologies, for the purpose of maximizing the use and usefulness of NASA generated Earth science data. Earth science information systems, evolving with the maturation and implementation of advancing technologies, reside at NASA data centers, known as Distributed Active Archive Centers (DAACs). With information management system infrastructure in place, and system data and user services already developed and operational, only very small delta costs are required to fully support data archival, processing, and data support services required by the recommended Decadal Study missions. This presentation describes the services and capabilities of the Goddard Space Flight Center (GSFC) Earth Sciences Data and Information Services Center (GES DISC) (one of NASAs DAACs) and their potential reuse for these future missions. After 14 years working with instrument teams and the broader science community, GES DISC personnel expertise in atmospheric, water cycle, and atmospheric modeling data and information services, as well as Earth science missions, information system engineering, operations, and user services have developed a series of modular, reusable data management components currently is use in several projects. The knowledge and experience gained at the GES DISC lend themselves to providing science driven information systems in the areas of aerosols, clouds, and atmospheric chemicals to be measured by recommended Decadal Survey missions. Available reusable capabilities include data archive and distribution (Simple, Scalable, Script-based, Science [S4] Product Archive aka S4PA), data processing (S4 Processor for Measurements aka S4PM), data search (Mirador), data browse, visualization, and analysis (Giovanni), and data mining services. In addition, recent enhancements, such as Open Geospatial Consortium (OGC), Inc. interoperability implementations and data fusion prototypes, will be described. As a result of the information management systems developed by NASAs GES DISC, not only are large cost savings realized through system reuse, but maintenance costs are also minimized due to the simplicity of their implementations.

Ontological modeling of electronic health information exchange.

PubMed

McMurray, J; Zhu, L; McKillop, I; Chen, H

2015-08-01

Investments of resources to purposively improve the movement of information between health system providers are currently made with imperfect information. No inventories of system-level electronic health information flows currently exist, nor do measures of inter-organizational electronic information exchange. Using Protégé 4, an open-source OWL Web ontology language editor and knowledge-based framework, we formalized a model that decomposes inter-organizational electronic health information flow into derivative concepts such as diversity, breadth, volume, structure, standardization and connectivity. The ontology was populated with data from a regional health system and the flows were measured. Individual instance's properties were inferred from their class associations as determined by their data and object property rules. It was also possible to visualize interoperability activity for regional analysis and planning purposes. A property called Impact was created from the total number of patients or clients that a health entity in the region served in a year, and the total number of health service providers or organizations with whom it exchanged information in support of clinical decision-making, diagnosis or treatment. Identifying providers with a high Impact but low Interoperability score could assist planners and policy-makers to optimize technology investments intended to electronically share patient information across the continuum of care. Finally, we demonstrated how linked ontologies were used to identify logical inconsistencies in self-reported data for the study. Copyright © 2015 Elsevier Inc. All rights reserved.

A design proposal of a certain missile tactical command system based on Beidou satellite communication and GPS positioning techniques

NASA Astrophysics Data System (ADS)

Ma, Jian; Hao, Yongsheng; Miao, Jian; Zhang, Jianmao

2007-11-01

This paper introduced a design proposal of tactical command system that applied to a kind of anti-tank missile carriers. The tactical command system was made up of embedded computer system based on PC104 bus, Linux operating system, digital military map, Beidou satellite communication equipments and GPS positioning equipments. The geographic coordinates was measured by the GPS receiver, the positioning data, commands and information were transmitted real-time between tactical command systems, tactical command systems and command center, by the Beidou satellite communication systems. The Beidou satellite communication equipments and GPS positioning equipments were integrated to an independent module, exchanging data with embedded computer through RS232 serial ports and USB ports. The decision support system software based on information fusion, calculates positioning data, geography information and battle field information synthetically, shows the position of allies and the position of enemy on the military map, and assesses the various threats of different enemy objects, educes a situation assessment and threat assessment.

Quantum-Classical Hybrid for Information Processing

NASA Technical Reports Server (NTRS)

Zak, Michail

2011-01-01

Based upon quantum-inspired entanglement in quantum-classical hybrids, a simple algorithm for instantaneous transmissions of non-intentional messages (chosen at random) to remote distances is proposed. The idea is to implement instantaneous transmission of conditional information on remote distances via a quantum-classical hybrid that preserves superposition of random solutions, while allowing one to measure its state variables using classical methods. Such a hybrid system reinforces the advantages, and minimizes the limitations, of both quantum and classical characteristics. Consider n observers, and assume that each of them gets a copy of the system and runs it separately. Although they run identical systems, the outcomes of even synchronized runs may be different because the solutions of these systems are random. However, the global constrain must be satisfied. Therefore, if the observer #1 (the sender) made a measurement of the acceleration v(sub 1) at t =T, then the receiver, by measuring the corresponding acceleration v(sub 1) at t =T, may get a wrong value because the accelerations are random, and only their ratios are deterministic. Obviously, the transmission of this knowledge is instantaneous as soon as the measurements have been performed. In addition to that, the distance between the observers is irrelevant because the x-coordinate does not enter the governing equations. However, the Shannon information transmitted is zero. None of the senders can control the outcomes of their measurements because they are random. The senders cannot transmit intentional messages. Nevertheless, based on the transmitted knowledge, they can coordinate their actions based on conditional information. If the observer #1 knows his own measurements, the measurements of the others can be fully determined. It is important to emphasize that the origin of entanglement of all the observers is the joint probability density that couples their actions. There is no centralized source, or a sender of the signal, because each receiver can become a sender as well. An observer receives a signal by performing certain measurements synchronized with the measurements of the others. This means that the signal is uniformly and simultaneously distributed over the observers in a decentralized way. The signals transmit no intentional information that would favor one agent over another. All the sequence of signals received by different observers are not only statistically equivalent, but are also point-by-point identical. It is important to assume that each agent knows that the other agent simultaneously receives the identical signals. The sequences of the signals are true random, so that no agent could predict the next step with the probability different from those described by the density. Under these quite general assumptions, the entangled observers-agents can perform non-trivial tasks that include transmission of conditional information from one agent to another, simple paradigm of cooperation, etc. The problem of behavior of intelligent agents correlated by identical random messages in a decentralized way has its own significance: it simulates evolutionary behavior of biological and social systems correlated only via simultaneous sensoring sequences of unexpected events.

Development of an Unmanned Aerial System (UAS) for Scaling Terrestrial Ecosystem Traits

NASA Astrophysics Data System (ADS)

Meng, R.; McMahon, A. M.; Serbin, S.; Rogers, A.

2015-12-01

The next generation of Ecosystem and Earth System Models (EESMs) will require detailed information on ecosystem structure and function, including properties of vegetation related to carbon (C), water, and energy cycling, in order to project the future state of ecosystems. High spatial-temporal resolution measurements of terrestrial ecosystem are also important for EESMs, because they can provide critical inputs and benchmark datasets for evaluation of EESMs simulations across scales. The recent development of high-quality, low-altitude remote sensing platforms or small UAS (< 25 kg) enables measurements of terrestrial ecosystems at unprecedented temporal and spatial scales. Specifically, these new platforms can provide detailed information on patterns and processes of terrestrial ecosystems at a critical intermediate scale between point measurements and suborbital and satellite platforms. Given their potential for sub-decimeter spatial resolution, improved mission safety, high revisit frequency, and reduced operation cost, these platforms are of particular interest in the development of ecological scaling algorithms to parameterize and benchmark EESMs, particularly over complex and remote terrain. Our group is developing a small UAS platform and integrated sensor package focused on measurement needs for scaling and informing ecosystem modeling activities, as well as scaling and mapping plant functional traits. To do this we are developing an integrated software workflow and hardware package using off-the-shelf instrumentation including a high-resolution digital camera for Structure from Motion, spectroradiometer, and a thermal infrared camera. Our workflow includes platform design, measurement, image processing, data management, and information extraction. The fusion of 3D structure information, thermal-infrared imagery, and spectroscopic measurements, will provide a foundation for the development of ecological scaling and mapping algorithms. Our initial focus is in temperate forests but near-term research will expand into the high-arctic and eventually tropical systems. The results of this prototype study show that off-the-shelf technology can be used to develop a low-cost alternative for mapping plant traits and three-dimensional structure for ecological research.

Validation of an electronic device for measuring driving exposure.

PubMed

Huebner, Kyla D; Porter, Michelle M; Marshall, Shawn C

2006-03-01

This study sought to evaluate an on-board diagnostic system (CarChip) for collecting driving exposure data in older drivers. Drivers (N = 20) aged 60 to 86 years from Winnipeg and surrounding communities participated. Information on driving exposure was obtained via the CarChip and global positioning system (GPS) technology on a driving course, and obtained via the CarChip and surveys over a week of driving. Velocities and distances were measured over the road course to validate the accuracy of the CarChip compared to GPS for those parameters. The results show that the CarChip does provide valid distance measurements and slightly lower maximum velocities than GPS measures. From the results obtained in this study, it was determined that retrospective self-reports of weekly driving distances are inaccurate. Therefore, an on-board diagnostic system (OBDII) electronic device like the CarChip can provide valid and detailed information about driving exposure that would be useful for studies of crash rates or driving behavior.

Design and implementation of a structural health monitoring and alerting system for hospital buildings in the United States

USGS Publications Warehouse

Ulusoy, Hasan S.; Kalkan, Erol; Fletcher, Jon Peter B.; Friberg, Paul; Leith, W. K.; Banga, Krishna

2012-01-01

This paper describes the current progress in the development of a structural health monitoring and alerting system to meet the needs of the U.S. Department of Veterans Affairs to monitor hospital buildings instrumented in high and very high seismic hazard regions in the U.S. The system, using the measured vibration data, is primarily designed for post-earthquake condition assessment of the buildings. It has two essential components – sensing and analysis. The sensing component includes all necessary firmware and sensors to measure the response of the building; while the analysis component consists of several data processing modules integrated into an open source software package which compresses a large amount of measured data into useful information to assess the building’s condition before and after an event. The information can be used for a rapid building safety assessment, and to support decisions for necessary repairs, replacements, and other maintenance and rehabilitation measures.

78 FR 38094 - Agency Information Collection Activities: Request for Comments for a New Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-25

.... SUPPLEMENTARY INFORMATION: Title: USDOT Survey and Comparative Assessment of Truck Parking Facilities. Background: US Department of Transportation (USDOT) is directed to complete a survey and comparative... of a system of metrics designed to measure the adequacy of commercial motor vehicle truck parking...

Design Considerations for Today's Online Learners: A Study of Personalized, Relationship-Based Social Awareness Information

ERIC Educational Resources Information Center

Heo, Misook

2009-01-01

This article examined online learners' preferences in personalized, relationship-based social awareness information sharing in course management systems. Three hundred seventy-seven online learners' willingness to share social awareness information was measured through a national survey. Results indicated that today's online learners are open…

10 CFR 73.21 - Protection of Safeguards Information: Performance requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... maintain an information protection system that includes the applicable measures for Safeguards Information specified in § 73.22 related to: Power reactors; a formula quantity of strategic special nuclear material; transportation of or delivery to a carrier for transportation of a formula quantity of strategic special nuclear...

NASA-6 atmospheric measuring station. [calibration, functional checks, and operation of measuring instruments

NASA Technical Reports Server (NTRS)

1973-01-01

Information required to calibrate, functionally check, and operate the Instrumentation Branch equipment on the NASA-6 aircraft is provided. All procedures required for preflight checks and in-flight operation of the NASA-6 atmospheric measuring station are given. The calibration section is intended for only that portion of the system maintained and calibrated by IN-MSD-12 Systems Operation contractor personnel. Maintenance is not included.

Multidisciplinary Information System of Assyrian Cuneiform Tablets Enhancing New Research Possibilities via Heterogeneous Data in Records

NASA Astrophysics Data System (ADS)

Valach, J.; Štefcová, P.; Bruna, R.; Zemánek, P.

2017-08-01

This paper outlines recently started project dedicated to creation and development of information system for cuneiform tablets. The contribution deals with the architecture of a virtual collection of cuneiform tablets, conceived as a complex system combining and integrating several domains of information obtained from various types of analyses. The research team includes experts from the field of collection conservation with philologists and researchers in the 3D scanning and physical measurement. Multidisciplinary databases like the one described, represent a new tool in digital humanities and help to improve accessibility of collections to public and researchers.

PRISM framework: a paradigm shift for designing, strengthening and evaluating routine health information systems

PubMed Central

Aqil, Anwer; Lippeveld, Theo; Hozumi, Dairiku

2009-01-01

The utility and effectiveness of routine health information systems (RHIS) in improving health system performance in developing countries has been questioned. This paper argues that the health system needs internal mechanisms to develop performance targets, track progress, and create and manage knowledge for continuous improvement. Based on documented RHIS weaknesses, we have developed the Performance of Routine Information System Management (PRISM) framework, an innovative approach to design, strengthen and evaluate RHIS. The PRISM framework offers a paradigm shift by putting emphasis on RHIS performance and incorporating the organizational, technical and behavioural determinants of performance. By describing causal pathways of these determinants, the PRISM framework encourages and guides the development of interventions for strengthening or reforming RHIS. Furthermore, it conceptualizes and proposes a methodology for measuring the impact of RHIS on health system performance. Ultimately, the PRISM framework, in spite of its challenges and competing paradigms, proposes a new agenda for building and sustaining information systems, for the promotion of an information culture, and for encouraging accountability in health systems. PMID:19304786

Development of a Web-Enabled Informatics Platform for Manipulation of Gene Expression Data

DTIC Science & Technology

2004-12-01

genomic platforms such as metabolomics and proteomics , and to federated databases for knowledge management. A successful SBIR Phase I completed...measurements that require sophisticated bioinformatic platforms for data archival, management, integration, and analysis if researchers are to derive...web-enabled bioinformatic platform consisting of a Laboratory Information Management System (LIMS), an Analysis Information Management System (AIMS

Development of a congestion management system using GPS technology

DOT National Transportation Integrated Search

1997-04-01

This report describes the results of a study undertaken to demonstrate the feasibility of using global positioning system (GPS) and geographic information system (GIS) technologies to measure travel time and speed data on urban highways. The methodol...

Observability-Based Guidance and Sensor Placement

NASA Astrophysics Data System (ADS)

Hinson, Brian T.

Control system performance is highly dependent on the quality of sensor information available. In a growing number of applications, however, the control task must be accomplished with limited sensing capabilities. This thesis addresses these types of problems from a control-theoretic point-of-view, leveraging system nonlinearities to improve sensing performance. Using measures of observability as an information quality metric, guidance trajectories and sensor distributions are designed to improve the quality of sensor information. An observability-based sensor placement algorithm is developed to compute optimal sensor configurations for a general nonlinear system. The algorithm utilizes a simulation of the nonlinear system as the source of input data, and convex optimization provides a scalable solution method. The sensor placement algorithm is applied to a study of gyroscopic sensing in insect wings. The sensor placement algorithm reveals information-rich areas on flexible insect wings, and a comparison to biological data suggests that insect wings are capable of acting as gyroscopic sensors. An observability-based guidance framework is developed for robotic navigation with limited inertial sensing. Guidance trajectories and algorithms are developed for range-only and bearing-only navigation that improve navigation accuracy. Simulations and experiments with an underwater vehicle demonstrate that the observability measure allows tuning of the navigation uncertainty.

Recalibration in functional perceptual-motor tasks: A systematic review.

PubMed

Brand, Milou Tessa; de Oliveira, Rita Ferraz

2017-12-01

Skilled actions are the result of a perceptual-motor system being well-calibrated to the appropriate information variables. Changes to the perceptual or motor system initiates recalibration, which is the rescaling of the perceptual-motor system to informational variables. For example, a professional baseball player may need to rescale their throws due to fatigue. The aim of this systematic review is to analyse how recalibration can and has been measured and also to evaluate the literature on recalibration. Five databases were systematically screened to identify literature that reported experiments where a disturbance was applied to the perceptual-motor system in functional perceptual-motor tasks. Each of the 91 experiments reported the immediate effects of a disturbance and/or the effects of removing that disturbance after recalibration. The results showed that experiments applied disturbances to either perception or action, and used either direct or indirect measures of recalibration. In contrast with previous conclusions, active exploration was only sufficient for fast recalibration when the relevant information source was available. Further research into recalibration mechanisms should include the study of information sources as well as skill expertise. Copyright © 2017 Elsevier B.V. All rights reserved.

Smoothed quantum-classical states in time-irreversible hybrid dynamics

NASA Astrophysics Data System (ADS)

Budini, Adrián A.

2017-09-01

We consider a quantum system continuously monitored in time which in turn is coupled to an arbitrary dissipative classical system (diagonal reduced density matrix). The quantum and classical dynamics can modify each other, being described by an arbitrary time-irreversible hybrid Lindblad equation. Given a measurement trajectory, a conditional bipartite stochastic state can be inferred by taking into account all previous recording information (filtering). Here, we demonstrate that the joint quantum-classical state can also be inferred by taking into account both past and future measurement results (smoothing). The smoothed hybrid state is estimated without involving information from unobserved measurement channels. Its average over recording realizations recovers the joint time-irreversible behavior. As an application we consider a fluorescent system monitored by an inefficient photon detector. This feature is taken into account through a fictitious classical two-level system. The average purity of the smoothed quantum state increases over that of the (mixed) state obtained from the standard quantum jump approach.

GNSS-based multi-sensor system for structural monitoring applications

NASA Astrophysics Data System (ADS)

Bogusz, Janusz; Figurski, Mariusz; Nykiel, Grzegorz; Szolucha, Marcin; Wrona, Maciej

2012-03-01

In 2007 the Centre of Applied Geomatics of the Military University of Technology started measurements aimed at the monitoring of the dynamic state of the engineering structures using GNSS. The complexity of the problem forced us to apply an integrated system architecture. This concept is based on simultaneous measuring some selected elements of the structure using various types of sensors. Measurement information from numerous instruments is numerically integrated for determining the investigated parameter, e.g., the displacement vector. The CAG team performed the tests using such a system on the two permanent 500-meters long bridges, the temporary bridge crossing for military purposes and the 300-meters high chimney of the CHP station. The information about displacement vector together with the characteristic frequencies of the structure were determined using different techniques for increasing of its reliability. This paper presents the results of such tests, gives description of the integrated system designed in the CAG and brings forward with the plans for the future.

pH measurements of FET-based (bio)chemical sensors using portable measurement system.

PubMed

Voitsekhivska, T; Zorgiebel, F; Suthau, E; Wolter, K-J; Bock, K; Cuniberti, G

2015-01-01

In this study we demonstrate the sensing capabilities of a portable multiplex measurement system for FET-based (bio)chemical sensors with an integrated microfluidic interface. We therefore conducted pH measurements with Silicon Nanoribbon FET-based Sensors using different measurement procedures that are suitable for various applications. We have shown multiplexed measurements in aqueous medium for three different modes that are mutually specialized in fast data acquisition (constant drain current), calibration-less sensing (constant gate voltage) and in providing full information content (sweeping mode). Our system therefore allows surface charge sensing for a wide range of applications and is easily adaptable for multiplexed sensing with novel FET-based (bio)chemical sensors.

[Measures to prevent patient identification errors in blood collection/physiological function testing utilizing a laboratory information system].

PubMed

Shimazu, Chisato; Hoshino, Satoshi; Furukawa, Taiji

2013-08-01

We constructed an integrated personal identification workflow chart using both bar code reading and an all in-one laboratory information system. The information system not only handles test data but also the information needed for patient guidance in the laboratory department. The reception terminals at the entrance, displays for patient guidance and patient identification tools at blood-sampling booths are all controlled by the information system. The number of patient identification errors was greatly reduced by the system. However, identification errors have not been abolished in the ultrasound department. After re-evaluation of the patient identification process in this department, we recognized that the major reason for the errors came from excessive identification workflow. Ordinarily, an ultrasound test requires patient identification 3 times, because 3 different systems are required during the entire test process, i.e. ultrasound modality system, laboratory information system and a system for producing reports. We are trying to connect the 3 different systems to develop a one-time identification workflow, but it is not a simple task and has not been completed yet. Utilization of the laboratory information system is effective, but is not yet perfect for patient identification. The most fundamental procedure for patient identification is to ask a person's name even today. Everyday checks in the ordinary workflow and everyone's participation in safety-management activity are important for the prevention of patient identification errors.

Midterm Stability Evaluation of Wide-area Power System by using Synchronized Phasor Measurements

NASA Astrophysics Data System (ADS)

Ota, Yutaka; Ukai, Hiroyuki; Nakamura, Koichi; Fujita, Hideki

In recent years, the PMU (Phasor Measurement Unit) receives a great deal of attention as a synchronized measurement system of power systems. Synchronized phasor angles obtained by the PMU provide the effective information for evaluating the stability of a bulk power system. The aspect of instability phenomena during midterm tends to be more complicated, and the stability analysis using the synchronized phasor measurements is significant in order to keep a complicated power system stable. This paper proposes a midterm stability evaluation method of the wide-area power system by using the synchronized phasor measurements. By clustering and aggregating the power system to some coherent groups, the step-out is effectively predicted on the basis of the two-machine equivalent power system model. The midterm stability of a longitudinal power system model of Japanese 60Hz systems constructed by the PSA, which is a hybrid-type power system simulator, is practically evaluated using the proposed method.

SO2 plume height retrieval from UV satellite measurements in support to aviation control

NASA Astrophysics Data System (ADS)

van Gent, Jeroen; Brenot, Hugues; Lerot, Christophe; Theys, Nicolas; Van Roozendael, Michel

2014-05-01

The Support to Aviation Control Service (SACS), operated at our institute, uses multi-sensor UV-visible and infrared satellite measurements to provide near real-time information on volcanic ash and SO2 concentrations. In case of enhanced SO2 concentrations, notifications are send out to subscribing organisations and individuals, with details regarding the volcanic event. This information may be used by aviation control organisations to judge the risc to air traffic and provide possible alternative routing. One of the latest additions to the system is information on the altitude of SO2 plumes, based on UV measurements of the GOME-2 sensors on the platforms METOP-A and METOP-B. Further improvement of this system is ongoing. This poster shows examples of plume height retrieval from GOME-2 (METOP-A and -B) and OMI (EOS-AURA). Results are shown for a number of recent major volcanic eruptions, each with different characteristics. The applied technique to retrieve altitude information will be discussed, as well as the applicability, quality and limitations of the method.

Information-Driven Active Audio-Visual Source Localization

PubMed Central

Schult, Niclas; Reineking, Thomas; Kluss, Thorsten; Zetzsche, Christoph

2015-01-01

We present a system for sensorimotor audio-visual source localization on a mobile robot. We utilize a particle filter for the combination of audio-visual information and for the temporal integration of consecutive measurements. Although the system only measures the current direction of the source, the position of the source can be estimated because the robot is able to move and can therefore obtain measurements from different directions. These actions by the robot successively reduce uncertainty about the source’s position. An information gain mechanism is used for selecting the most informative actions in order to minimize the number of actions required to achieve accurate and precise position estimates in azimuth and distance. We show that this mechanism is an efficient solution to the action selection problem for source localization, and that it is able to produce precise position estimates despite simplified unisensory preprocessing. Because of the robot’s mobility, this approach is suitable for use in complex and cluttered environments. We present qualitative and quantitative results of the system’s performance and discuss possible areas of application. PMID:26327619

A case study evaluation of a Critical Care Information System adoption using the socio-technical and fit approach.

PubMed

Yusof, Maryati Mohd

2015-07-01

Clinical information systems have long been used in intensive care units but reports on their adoption and benefits are limited. This study evaluated a Critical Care Information System implementation. A case study summative evaluation was conducted, employing observation, interview, and document analysis in operating theatres and 16-bed adult intensive care units in a 400-bed Malaysian tertiary referral centre from the perspectives of users (nurses and physicians), management, and information technology staff. System implementation, factors influencing adoption, fit between these factors, and the impact of the Critical Care Information System were evaluated after eight months of operation. Positive influences on system adoption were associated with technical factors, including system ease of use, usefulness, and information relevancy; human factors, particularly user attitude; and organisational factors, namely clinical process-technology alignment and champions. Organisational factors such as planning, project management, training, technology support, turnover rate, clinical workload, and communication were barriers to system implementation and use. Recommendations to improve the current system problems were discussed. Most nursing staff positively perceived the system's reduction of documentation and data access time, giving them more time with patients. System acceptance varied among doctors. System use also had positive impacts on timesaving, data quality, and clinical workflow. Critical Care Information Systems is crucial and has great potentials in enhancing and delivering critical care. However, the case study findings showed that the system faced complex challenges and was underutilised despite its potential. The role of socio-technical factors and their fit in realizing the potential of Critical Care Information Systems requires continuous, in-depth evaluation and stakeholder understanding and acknowledgement. The comprehensive and specific evaluation measures of the Human-Organisation-Technology Fit framework can flexibly evaluate Critical Care Information Systems. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Evaluation of Routine Atmospheric Sounding Measurements using Unmanned Systems (ERASMUS) Science Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

de Boer, G; Argrow, B; Bland, G

2015-12-01

The use of unmanned aerial systems (UAS) is becoming increasingly popular for a variety of applications. One way in which these systems can provide revolutionary scientific information is through routine measurement of atmospheric conditions, particularly properties related to clouds, aerosols, and radiation. Improved understanding of these topics at high latitudes, in particular, has become very relevant because of observed decreases in ice and snow in polar regions.

Painting recognition with smartphones equipped with inertial measurement unit

NASA Astrophysics Data System (ADS)

Masiero, Andrea; Guarnieri, Alberto; Pirotti, Francesco; Vettore, Antonio

2015-06-01

Recently, several works have been proposed in the literature to take advantage of the diffusion of smartphones to improve people experience during museum visits. The rationale is that of substituting traditional written/audio guides with interactive electronic guides usable on a mobile phone. Augmented reality systems are usually considered to make the use of such electronic guides more effective for the user. The main goal of such augmented reality system (i.e. providing the user with the information of his/her interest) is usually achieved by properly executing the following three tasks: recognizing the object of interest to the user, retrieving the most relevant information about it, properly presenting the retrieved information. This paper focuses on the first task: we consider the problem of painting recognition by means of measure- ments provided by a smartphone. We assume that the user acquires one image of the painting of interest with the standard camera of the device. This image is compared with a set of reference images of the museum objects in order to recognize the object of interest to the user. Since comparing images taken in different conditions can lead to unsatisfactory recognition results, the acquired image is typically properly transformed in order to improve the results of the recognition system: first, the system estimates the homography between properly matched features in the two images. Then, the user image is transformed accordingly to the estimated homography. Finally, it is compared with the reference one. This work proposes a novel method to exploit inertial measurement unit (IMU) measurements to improve the system performance, in particular in terms of computational load reduction: IMU measurements are exploited to reduce both the computational burden required to estimate the transformation to be applied to the user image, and the number of reference images to be compared with it.

Use of Airport Noise Complaint Files to Improve Understanding of Community Response to Aircraft Noise

NASA Technical Reports Server (NTRS)

Fidell, Sanford; Howe, Richard

1998-01-01

This study assessed the feasibility of using complaint information archived by modem airport monitoring systems to conduct quantitative analyses of the causes of aircraft noise complaints and their relationship to noise- induced annoyance. It was found that all computer-based airport monitoring systems provide at least rudimentary tools for performing data base searches by complainant name, address, date, time of day, and types of aircraft and complaints. Analyses of such information can provide useful information about longstanding concerns, such as the extent to which complaint rates are driven by objectively measurable aspects of aircraft operations; the degree to which changes in complaint rates can be predicted prior to implementation of noise mitigation measures; and the degree to which aircraft complaint information can be used to simplify and otherwise improve prediction of the prevalence of noise-induced annoyance in communities.

Using information Theory in Optimal Test Point Selection for Health Management in NASA's Exploration Vehicles

NASA Technical Reports Server (NTRS)

Mehr, Ali Farhang; Tumer, Irem

2005-01-01

In this paper, we will present a new methodology that measures the "worth" of deploying an additional testing instrument (sensor) in terms of the amount of information that can be retrieved from such measurement. This quantity is obtained using a probabilistic model of RLV's that has been partially developed in the NASA Ames Research Center. A number of correlated attributes are identified and used to obtain the worth of deploying a sensor in a given test point from an information-theoretic viewpoint. Once the information-theoretic worth of sensors is formulated and incorporated into our general model for IHM performance, the problem can be formulated as a constrained optimization problem where reliability and operational safety of the system as a whole is considered. Although this research is conducted specifically for RLV's, the proposed methodology in its generic form can be easily extended to other domains of systems health monitoring.

Readiness factors for information system strategic planning among universities in developing countries: a systematic review

NASA Astrophysics Data System (ADS)

Irfan, M.; Putra, S. J.; Alam, C. N.; Subiyakto, A.; Wahana, A.

2018-03-01

The implementation of information system strategic planning (ISSP) in higher education institutions is to improve work efficiency, management effectiveness in order to improve organizational competitive advantage. However, the question of whether all universities are ready to implement ISSP as a way to achieve organizational goals has not been answered. This study aims to investigate the readiness phenomena through literature study. The method used is by using the Systematic Literature Review (SLR) instrument to identify readiness factors on the implementation of ISSP, especially among the institutions of higher education in developing countries. This study has identified 10 readiness measurement. There are three categories of measurement, namely people, processes and technologies that represent 11 factors of ISSP readiness measurement in universities.

Optimized tomography of continuous variable systems using excitation counting

NASA Astrophysics Data System (ADS)

Shen, Chao; Heeres, Reinier W.; Reinhold, Philip; Jiang, Luyao; Liu, Yi-Kai; Schoelkopf, Robert J.; Jiang, Liang

2016-11-01

We propose a systematic procedure to optimize quantum state tomography protocols for continuous variable systems based on excitation counting preceded by a displacement operation. Compared with conventional tomography based on Husimi or Wigner function measurement, the excitation counting approach can significantly reduce the number of measurement settings. We investigate both informational completeness and robustness, and provide a bound of reconstruction error involving the condition number of the sensing map. We also identify the measurement settings that optimize this error bound, and demonstrate that the improved reconstruction robustness can lead to an order-of-magnitude reduction of estimation error with given resources. This optimization procedure is general and can incorporate prior information of the unknown state to further simplify the protocol.

Information Fusion from the Point of View of Communication Theory; Fusing Information to Trade-Off the Resolution of Assessments Against the Probability of Mis-Assessment

DTIC Science & Technology

2013-08-19

excellence in linear models , 2010. She successfully defended her dissertation, Linear System Design for Fusion and Compression, on Aug 13, 2013. Her work was...measurements into canonical coordinates, scaling, and rotation; there is a water-filling interpretation; (3) the optimum design of a linear secondary channel of...measurements to fuse with a primary linear channel of measurements maximizes a generalized Rayleigh quotient; (4) the asymptotically optimum

Evaluating convex roof entanglement measures.

PubMed

Tóth, Géza; Moroder, Tobias; Gühne, Otfried

2015-04-24

We show a powerful method to compute entanglement measures based on convex roof constructions. In particular, our method is applicable to measures that, for pure states, can be written as low order polynomials of operator expectation values. We show how to compute the linear entropy of entanglement, the linear entanglement of assistance, and a bound on the dimension of the entanglement for bipartite systems. We discuss how to obtain the convex roof of the three-tangle for three-qubit states. We also show how to calculate the linear entropy of entanglement and the quantum Fisher information based on partial information or device independent information. We demonstrate the usefulness of our method by concrete examples.

United States benefits of improved worldwide wheat crop information from a LANDSAT system

NASA Technical Reports Server (NTRS)

Heiss, K. P.; Sand, F.; Seidel, A.; Warner, D.; Sheflin, N.; Bhattacharyya, R.; Andrews, J.

1975-01-01

The value of worldwide information improvements on wheat crops, promised by LANDSAT, is measured in the context of world wheat markets. These benefits are based on current LANDSAT technical goals and assume that information is made available to all (United States and other countries) at the same time. A detailed empirical sample demonstration of the effect of improved information is given; the history of wheat commodity prices for 1971-72 is reconstructed and the price changes from improved vs. historical information are compared. The improved crop forecasting from a LANDSAT system assumed include wheat crop estimates of 90 percent accuracy for each major wheat producing region. Accurate, objective worldwide wheat crop information using space systems may have a very stabilizing influence on world commodity markets, in part making possible the establishment of long-term, stable trade relationships.

Information Sharing within the COEA Process

DTIC Science & Technology

1993-12-01

Foster. Cost Accounting . EnO Cliffs NJ: Prentice Hall, 1991. Irwin, F.C. An Expert System For Measuring. Inting. and Managing System Performance Factors...AD-A273 906 /El~lhll~lR~IUiM "AFIT/GIR/LAR/93D-9 DTIC ELECTE DEC2 11993 INFORMATION SHARING WITHIN THE COEA PROCESS THESIS Constance S . Maginnis, GS...the Requirements for the Degree of Master of Science in Information Resource Management Constance S . Maginnis, B.S. Michael J. Monroe, M.A. GS-13, USAF

A functional video-based anthropometric measuring system

NASA Technical Reports Server (NTRS)

Nixon, J. H.; Cater, J. P.

1982-01-01

A high-speed anthropometric three dimensional measurement system using the Selcom Selspot motion tracking instrument for visual data acquisition is discussed. A three-dimensional scanning system was created which collects video, audio, and performance data on a single standard video cassette recorder. Recording rates of 1 megabit per second for periods of up to two hours are possible with the system design. A high-speed off-the-shelf motion analysis system for collecting optical information as used. The video recording adapter (VRA) is interfaced to the Selspot data acquisition system.

Optimality in Data Assimilation

NASA Astrophysics Data System (ADS)

Nearing, Grey; Yatheendradas, Soni

2016-04-01

It costs a lot more to develop and launch an earth-observing satellite than it does to build a data assimilation system. As such, we propose that it is important to understand the efficiency of our assimilation algorithms at extracting information from remote sensing retrievals. To address this, we propose that it is necessary to adopt completely general definition of "optimality" that explicitly acknowledges all differences between the parametric constraints of our assimilation algorithm (e.g., Gaussianity, partial linearity, Markovian updates) and the true nature of the environmetnal system and observing system. In fact, it is not only possible, but incredibly straightforward, to measure the optimality (in this more general sense) of any data assimilation algorithm as applied to any intended model or natural system. We measure the information content of remote sensing data conditional on the fact that we are already running a model and then measure the actual information extracted by data assimilation. The ratio of the two is an efficiency metric, and optimality is defined as occurring when the data assimilation algorithm is perfectly efficient at extracting information from the retrievals. We measure the information content of the remote sensing data in a way that, unlike triple collocation, does not rely on any a priori presumed relationship (e.g., linear) between the retrieval and the ground truth, however, like triple-collocation, is insensitive to the spatial mismatch between point-based measurements and grid-scale retrievals. This theory and method is therefore suitable for use with both dense and sparse validation networks. Additionally, the method we propose is *constructive* in the sense that it provides guidance on how to improve data assimilation systems. All data assimilation strategies can be reduced to approximations of Bayes' law, and we measure the fractions of total information loss that are due to individual assumptions or approximations in the prior (i.e., the model uncertainty distribution), and in the likelihood (i.e., the observation operator and observation uncertainty distribution). In this way, we can directly identify the parts of a data assimilation algorithm that contribute most to assimilation error in a way that (unlike traditional DA performance metrics) considers nonlinearity in the model and observation and non-optimality in the fit between filter assumptions and the real system. To reiterate, the method we propose is theoretically rigorous but also dead-to-rights simple, and can be implemented in no more than a few hours by a competent programmer. We use this to show that careful applications of the Ensemble Kalman Filter use substantially less than half of the information contained in remote sensing soil moisture retrievals (LPRM, AMSR-E, SMOS, and SMOPS). We propose that this finding may explain some of the results from several recent large-scale experiments that show lower-than-expected value to assimilating soil moisture retrievals into land surface models forced by high-quality precipitation data. Our results have important implications for the SMAP mission because over half of the SMAP-affiliated "early adopters" plan to use the EnKF as their primary method for extracting information from SMAP retrievals.

Implementation of the common phrase index method on the phrase query for information retrieval

NASA Astrophysics Data System (ADS)

Fatmawati, Triyah; Zaman, Badrus; Werdiningsih, Indah

2017-08-01

As the development of technology, the process of finding information on the news text is easy, because the text of the news is not only distributed in print media, such as newspapers, but also in electronic media that can be accessed using the search engine. In the process of finding relevant documents on the search engine, a phrase often used as a query. The number of words that make up the phrase query and their position obviously affect the relevance of the document produced. As a result, the accuracy of the information obtained will be affected. Based on the outlined problem, the purpose of this research was to analyze the implementation of the common phrase index method on information retrieval. This research will be conducted in English news text and implemented on a prototype to determine the relevance level of the documents produced. The system is built with the stages of pre-processing, indexing, term weighting calculation, and cosine similarity calculation. Then the system will display the document search results in a sequence, based on the cosine similarity. Furthermore, system testing will be conducted using 100 documents and 20 queries. That result is then used for the evaluation stage. First, determine the relevant documents using kappa statistic calculation. Second, determine the system success rate using precision, recall, and F-measure calculation. In this research, the result of kappa statistic calculation was 0.71, so that the relevant documents are eligible for the system evaluation. Then the calculation of precision, recall, and F-measure produces precision of 0.37, recall of 0.50, and F-measure of 0.43. From this result can be said that the success rate of the system to produce relevant documents is low.

Modeling of BN Lifetime Prediction of a System Based on Integrated Multi-Level Information

PubMed Central

Wang, Xiaohong; Wang, Lizhi

2017-01-01

Predicting system lifetime is important to ensure safe and reliable operation of products, which requires integrated modeling based on multi-level, multi-sensor information. However, lifetime characteristics of equipment in a system are different and failure mechanisms are inter-coupled, which leads to complex logical correlations and the lack of a uniform lifetime measure. Based on a Bayesian network (BN), a lifetime prediction method for systems that combine multi-level sensor information is proposed. The method considers the correlation between accidental failures and degradation failure mechanisms, and achieves system modeling and lifetime prediction under complex logic correlations. This method is applied in the lifetime prediction of a multi-level solar-powered unmanned system, and the predicted results can provide guidance for the improvement of system reliability and for the maintenance and protection of the system. PMID:28926930

Modeling of BN Lifetime Prediction of a System Based on Integrated Multi-Level Information.

PubMed

Wang, Jingbin; Wang, Xiaohong; Wang, Lizhi

2017-09-15

Predicting system lifetime is important to ensure safe and reliable operation of products, which requires integrated modeling based on multi-level, multi-sensor information. However, lifetime characteristics of equipment in a system are different and failure mechanisms are inter-coupled, which leads to complex logical correlations and the lack of a uniform lifetime measure. Based on a Bayesian network (BN), a lifetime prediction method for systems that combine multi-level sensor information is proposed. The method considers the correlation between accidental failures and degradation failure mechanisms, and achieves system modeling and lifetime prediction under complex logic correlations. This method is applied in the lifetime prediction of a multi-level solar-powered unmanned system, and the predicted results can provide guidance for the improvement of system reliability and for the maintenance and protection of the system.

District health information system assessment: a case study in iran.

PubMed

Raeisi, Ahmad Reza; Saghaeiannejad, Sakineh; Karimi, Saeed; Ehteshami, Asghar; Kasaei, Mahtab

2013-03-01

Health care managers and personnel should be aware and literate of health information system in order to increase the efficiency and effectiveness in their organization. Since accurate, appropriate, precise, timely, valid information and interpretation of information is required and is the basis for policy planning and decision making in various levels of the organization. This study was conducted to assess the district health information system evolution in Iran according to WHO framework. This research is an applied, descriptive cross sectional study, in which a total of twelve urban and eight rural facilities, and the district health center at Falavarjan region were surveyed by using a questionnaire with 334 items. Content and constructive validity and reliability of the questionnaire were confirmed with correlation coefficient of 0.99. Obtained data were analyzed with SPSS 16 software and descriptive statistics were used to examine measures of WHO compliance. The analysis of data revealed that the mean score of compliance of district health information system framework was 35.75 percent. The maximum score of compliance with district health information system belonged to the data collection process (70 percent). The minimum score of compliance with district health information system belonged to information based decision making process with a score of 10 percent. District Health Information System Criteria in Isfahan province do not completely comply with WHO framework. Consequently, it seems that health system managers engaged with underlying policy and decision making processes at district health level should try to restructure and decentralize district health information system and develop training management programs for their managers.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carr, F. Jr.; Mahaffey, J.A.

The purpose of the DOE/OHER Chernobyl Database project is to create and maintain an information system to provide usable information for research studies related to the nuclear accident. The system is the official United States repository for information about the Chernobyl accident and its consequences, and currently includes an extensive bibliography and diverse radiological measurements with supporting information. PNL has established two resources: original (not summarized) measurement data, currently about 80,000 measurements, with ancillary information; and about 2,200 bibliographic citations, some including abstracts. Major organizations that have contributed radiological measurement data include the Washington State Department of Social and Healthmore » Services; United States Environmental Protection Agency (domestic and foreign data); United States Nuclear Regulatory Commission; Stone Webster; Brookhaven National Laboratory; Commissariat A L'energie Atomique in France; Ministry of Agriculture, Fisheries, and Food in the United Kingdom; Japan National Institute of Radiological Sciences; and the Finnish Centre For Radiation and Nuclear Safety (STUK). Scientists in Australia, Austria, Belgium, Canada, China, Denmark, England, Federal Republic of Germany, Finland, France, Ireland, Italy, Japan, the Netherlands, Romania, Scotland, Spain, Sweden, Switzerland, United States, Wales, and Yugoslavia have made contributions. Bibliographic materials have been obtained from scientists in the above countries that have replied to requests. In addition, literature searches have been conducted, including a search of the DOE Energy Database. The last search was conducted in January, 1989. This document lists the bibliographic information in the DOE/OHER Chernobyl Database at the current time.« less

[Low concordance between primary care and hospital clinical information].

PubMed

Revilla-López, Concha; Calderón-Larrañaga, Amaia; Enríquez-Martín, Natalia; Prados-Torres, Alexandra

2016-04-01

To measure the diagnostic agreement between Primary Care (PC) and hospital information systems, in order to assess the usefulness of health care records for research purposes. Cross-sectional retrospective study integrating PC and hospital diagnostic information for the Aragon population admitted to hospital in 2010. 75.176 patients were analysed. Similarities, differences and the kappa index were calculated for each of the diagnoses recorded in both information systems. The studied diseases included COPD, diabetes, hypertension, cerebrovascular disease, ischaemic heart disease, asthma, epilepsy, and heart failure. Diagnostic concordance was higher in men and between 45 and 64 years. Diabetes was the condition showing the highest concordance (kappa index: 0.75), while asthma had the lowest values (kappa index: 0.34). The low concordance between the diagnostic information recorded in PC and in the hospital setting calls for urgent measures to ensure that healthcare professionals have a comprehensive picture of patient's health problems. Copyright © 2015 Elsevier España, S.L.U. All rights reserved.

Self-dissimilarity as a High Dimensional Complexity Measure

NASA Technical Reports Server (NTRS)

Wolpert, David H.; Macready, William

2005-01-01

For many systems characterized as "complex" the patterns exhibited on different scales differ markedly from one another. For example the biomass distribution in a human body "looks very different" depending on the scale at which one examines it. Conversely, the patterns at different scales in "simple" systems (e.g., gases, mountains, crystals) vary little from one scale to another. Accordingly, the degrees of self-dissimilarity between the patterns of a system at various scales constitute a complexity "signature" of that system. Here we present a novel quantification of self-dissimilarity. This signature can, if desired, incorporate a novel information-theoretic measure of the distance between probability distributions that we derive here. Whatever distance measure is chosen, our quantification of self-dissimilarity can be measured for many kinds of real-world data. This allows comparisons of the complexity signatures of wholly different kinds of systems (e.g., systems involving information density in a digital computer vs. species densities in a rain-forest vs. capital density in an economy, etc.). Moreover, in contrast to many other suggested complexity measures, evaluating the self-dissimilarity of a system does not require one to already have a model of the system. These facts may allow self-dissimilarity signatures to be used a s the underlying observational variables of an eventual overarching theory relating all complex systems. To illustrate self-dissimilarity we present several numerical experiments. In particular, we show that underlying structure of the logistic map is picked out by the self-dissimilarity signature of time series produced by that map

Information theoretic analysis of proprioceptive encoding during finger flexion in the monkey sensorimotor system.

PubMed

Witham, Claire L; Baker, Stuart N

2015-01-01

There is considerable debate over whether the brain codes information using neural firing rate or the fine-grained structure of spike timing. We investigated this issue in spike discharge recorded from single units in the sensorimotor cortex, deep cerebellar nuclei, and dorsal root ganglia in macaque monkeys trained to perform a finger flexion task. The task required flexion to four different displacements against two opposing torques; the eight possible conditions were randomly interleaved. We used information theory to assess coding of task condition in spike rate, discharge irregularity, and spectral power in the 15- to 25-Hz band during the period of steady holding. All three measures coded task information in all areas tested. Information coding was most often independent between irregularity and 15-25 Hz power (60% of units), moderately redundant between spike rate and irregularity (56% of units redundant), and highly redundant between spike rate and power (93%). Most simultaneously recorded unit pairs coded using the same measure independently (86%). Knowledge of two measures often provided extra information about task, compared with knowledge of only one alone. We conclude that sensorimotor systems use both rate and temporal codes to represent information about a finger movement task. As well as offering insights into neural coding, this work suggests that incorporating spike irregularity into algorithms used for brain-machine interfaces could improve decoding accuracy. Copyright © 2015 the American Physiological Society.

A system for classifying disease comorbidity status from medical discharge summaries using automated hotspot and negated concept detection.

PubMed

Ambert, Kyle H; Cohen, Aaron M

2009-01-01

OBJECTIVE Free-text clinical reports serve as an important part of patient care management and clinical documentation of patient disease and treatment status. Free-text notes are commonplace in medical practice, but remain an under-used source of information for clinical and epidemiological research, as well as personalized medicine. The authors explore the challenges associated with automatically extracting information from clinical reports using their submission to the Integrating Informatics with Biology and the Bedside (i2b2) 2008 Natural Language Processing Obesity Challenge Task. DESIGN A text mining system for classifying patient comorbidity status, based on the information contained in clinical reports. The approach of the authors incorporates a variety of automated techniques, including hot-spot filtering, negated concept identification, zero-vector filtering, weighting by inverse class-frequency, and error-correcting of output codes with linear support vector machines. MEASUREMENTS Performance was evaluated in terms of the macroaveraged F1 measure. RESULTS The automated system performed well against manual expert rule-based systems, finishing fifth in the Challenge's intuitive task, and 13(th) in the textual task. CONCLUSIONS The system demonstrates that effective comorbidity status classification by an automated system is possible.

Secure scalable disaster electronic medical record and tracking system.

PubMed

Demers, Gerard; Kahn, Christopher; Johansson, Per; Buono, Colleen; Chipara, Octav; Griswold, William; Chan, Theodore

2013-10-01

Electronic medical records (EMRs) are considered superior in documentation of care for medical practice. Current disaster medical response involves paper tracking systems and radio communication for mass-casualty incidents (MCIs). These systems are prone to errors, may be compromised by local conditions, and are labor intensive. Communication infrastructure may be impacted, overwhelmed by call volume, or destroyed by the disaster, making self-contained and secure EMR response a critical capability. Report As the prehospital disaster EMR allows for more robust content including protected health information (PHI), security measures must be instituted to safeguard these data. The Wireless Internet Information System for medicAl Response in Disasters (WIISARD) Research Group developed a handheld, linked, wireless EMR system utilizing current technology platforms. Smart phones connected to radio frequency identification (RFID) readers may be utilized to efficiently track casualties resulting from the incident. Medical information may be transmitted on an encrypted network to fellow prehospital team members, medical dispatch, and receiving medical centers. This system has been field tested in a number of exercises with excellent results, and future iterations will incorporate robust security measures. A secure prehospital triage EMR improves documentation quality during disaster drills.

Invited review: sensors to support health management on dairy farms.

PubMed

Rutten, C J; Velthuis, A G J; Steeneveld, W; Hogeveen, H

2013-04-01

Since the 1980s, efforts have been made to develop sensors that measure a parameter from an individual cow. The development started with individual cow recognition and was followed by sensors that measure the electrical conductivity of milk and pedometers that measure activity. The aim of this review is to provide a structured overview of the published sensor systems for dairy health management. The development of sensor systems can be described by the following 4 levels: (I) techniques that measure something about the cow (e.g., activity); (II) interpretations that summarize changes in the sensor data (e.g., increase in activity) to produce information about the cow's status (e.g., estrus); (III) integration of information where sensor information is supplemented with other information (e.g., economic information) to produce advice (e.g., whether to inseminate a cow or not); and (IV) the farmer makes a decision or the sensor system makes the decision autonomously (e.g., the inseminator is called). This review has structured a total of 126 publications describing 139 sensor systems and compared them based on the 4 levels. The publications were published in the Thomson Reuters (formerly ISI) Web of Science database from January 2002 until June 2012 or in the proceedings of 3 conferences on precision (dairy) farming in 2009, 2010, and 2011. Most studies concerned the detection of mastitis (25%), fertility (33%), and locomotion problems (30%), with fewer studies (16%) related to the detection of metabolic problems. Many studies presented sensor systems at levels I and II, but none did so at levels III and IV. Most of the work for mastitis (92%) and fertility (75%) is done at level II. For locomotion (53%) and metabolism (69%), more than half of the work is done at level I. The performance of sensor systems varies based on the choice of gold standards, algorithms, and test sizes (number of farms and cows). Studies on sensor systems for mastitis and estrus have shown that sensor systems are brought to a higher level; however, the need to improve detection performance still exists. Studies on sensor systems for locomotion problems have shown that the search continues for the most appropriate indicators, sensor techniques, and gold standards. Studies on metabolic problems show that it is still unclear which indicator reflects best the metabolic problems that should be detected. No systems with integrated decision support models have been found. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Modifying the System for Observing Fitness Instruction Time to Measure Teacher Practices Related to Physical Activity Promotion: SOFIT+

ERIC Educational Resources Information Center

Weaver, R. Glenn; Webster, Collin A.; Erwin, Heather; Beighle, Aaron; Beets, Michael W.; Choukroun, Hadrien; Kaysing, Nicole

2016-01-01

The System for Observing Fitness Instruction Time (SOFIT) is commonly used to measure variables related to physical activity during physical education (PE). However, SOFIT does not yield detailed information about teacher practices related to children's moderate-to-vigorous physical activity (MVPA). This study describes the modification of SOFIT…

Validation of the DeLone and McLean Information Systems Success Model.

PubMed

Ojo, Adebowale I

2017-01-01

This study is an adaptation of the widely used DeLone and McLean information system success model in the context of hospital information systems in a developing country. A survey research design was adopted in the study. A structured questionnaire was used to collect data from 442 health information management personnel in five Nigerian teaching hospitals. A structural equation modeling technique was used to validate the model's constructs. It was revealed that system quality significantly influenced use (β = 0.53, p < 0.001) and user satisfaction (β = 0.17, p < 0.001). Information quality significantly influenced use (β = 0.24, p < 0.001) and user satisfaction (β = 0.17, p < 0.001). Also, service quality significantly influenced use (β = 0.22, p < 0.001) and user satisfaction (β = 0.51, p < 0.001). However, use did not significantly influence user satisfaction (β = 0.00, p > 0.05), but it significantly influenced perceived net benefits (β = 0.21, p < 0.001). Furthermore, user satisfaction did not significantly influence perceived net benefits (β = 0.00, p > 0.05). The study validates the DeLone and McLean information system success model in the context of a hospital information system in a developing country. Importantly, system quality and use were found to be important measures of hospital information system success. It is, therefore, imperative that hospital information systems are designed in such ways that are easy to use, flexible, and functional to serve their purpose.

Validation of the DeLone and McLean Information Systems Success Model

PubMed Central

2017-01-01

Objectives This study is an adaptation of the widely used DeLone and McLean information system success model in the context of hospital information systems in a developing country. Methods A survey research design was adopted in the study. A structured questionnaire was used to collect data from 442 health information management personnel in five Nigerian teaching hospitals. A structural equation modeling technique was used to validate the model's constructs. Results It was revealed that system quality significantly influenced use (β = 0.53, p < 0.001) and user satisfaction (β = 0.17, p < 0.001). Information quality significantly influenced use (β = 0.24, p < 0.001) and user satisfaction (β = 0.17, p < 0.001). Also, service quality significantly influenced use (β = 0.22, p < 0.001) and user satisfaction (β = 0.51, p < 0.001). However, use did not significantly influence user satisfaction (β = 0.00, p > 0.05), but it significantly influenced perceived net benefits (β = 0.21, p < 0.001). Furthermore, user satisfaction did not significantly influence perceived net benefits (β = 0.00, p > 0.05). Conclusions The study validates the DeLone and McLean information system success model in the context of a hospital information system in a developing country. Importantly, system quality and use were found to be important measures of hospital information system success. It is, therefore, imperative that hospital information systems are designed in such ways that are easy to use, flexible, and functional to serve their purpose. PMID:28261532

Value measurement in health care: a new perspective.

PubMed

Michelman, J E; Rausch, P E; Barton, T L

1999-08-01

Vital to the success of any healthcare organization is the ability to obtain useful information and feedback about its performance. In particular, healthcare organizations need to begin to understand how non-value-adding work activities detract from their bottom lines. Additionally, financial managers and information systems need to provide data and reports throughout the continuum of care. Overall, healthcare organizations must align the management information and control systems with the planning and decision-making processes. The horizontal information system is a tool to manage three common problems facing today's healthcare managers: (1) the use of existing information to focus on control rather than improve business, (2) failure to focus on satisfying the customer, and (3) failure to combine their efforts with those of the employees by developing trust and a common focus.

Information theory in systems biology. Part II: protein-protein interaction and signaling networks.

PubMed

Mousavian, Zaynab; Díaz, José; Masoudi-Nejad, Ali

2016-03-01

By the development of information theory in 1948 by Claude Shannon to address the problems in the field of data storage and data communication over (noisy) communication channel, it has been successfully applied in many other research areas such as bioinformatics and systems biology. In this manuscript, we attempt to review some of the existing literatures in systems biology, which are using the information theory measures in their calculations. As we have reviewed most of the existing information-theoretic methods in gene regulatory and metabolic networks in the first part of the review, so in the second part of our study, the application of information theory in other types of biological networks including protein-protein interaction and signaling networks will be surveyed. Copyright © 2015 Elsevier Ltd. All rights reserved.

The design of the layout of faceted multi-channel electro-optical spatial coordinates measuring instrument for point-like bright objects

NASA Astrophysics Data System (ADS)

Repin, Vladislav A.; Gorbunova, Elena V.; Chertov, Aleksandr N.; Korotaev, Valery V.

2017-06-01

For many applied problems it is necessary to obtain information about the situation in a wide angular field in order to measure various parameters of objects: their spatial coordinates, instantaneous velocities, and so on. In this case, one interesting bionic approach can be used - a mosaic (or discrete, otherwise, facet) angular field. Such electro-optical system constructively imitates the visual apparatus of insects: many photodetectors like ommatidia (elements of the facet eye structure) are located on a non-planar surface. Such devices can be used in photogrammetry and aerial photography systems (if the space is sufficient), in the transport sector as vehicle orientation organs, as systems for monitoring in unmanned aerial vehicles, in endoscopy for obtaining comprehensive information on the state of various cavities, in intelligent robotic systems. In this manuscript discusses the advantages and disadvantages of multi-channeled optoelectronic systems with a mosaic angular field, presents possible options for their use, and discusses some of the design procedures performed when developing a layout of a coordinate measuring device.

Causality, Measurement, and Elementary Interactions

NASA Astrophysics Data System (ADS)

Gillis, Edward J.

2011-12-01

Signal causality, the prohibition of superluminal information transmission, is the fundamental property shared by quantum measurement theory and relativity, and it is the key to understanding the connection between nonlocal measurement effects and elementary interactions. To prevent those effects from transmitting information between the generating and observing process, they must be induced by the kinds of entangling interactions that constitute measurements, as implied in the Projection Postulate. They must also be nondeterministic as reflected in the Born Probability Rule. The nondeterminism of entanglement-generating processes explains why the relevant types of information cannot be instantiated in elementary systems, and why the sequencing of nonlocal effects is, in principle, unobservable. This perspective suggests a simple hypothesis about nonlocal transfers of amplitude during entangling interactions, which yields straightforward experimental consequences.

Development of a digital-micromirror-device-based multishot snapshot spectral imaging system.

PubMed

Wu, Yuehao; Mirza, Iftekhar O; Arce, Gonzalo R; Prather, Dennis W

2011-07-15

We report on the development of a digital-micromirror-device (DMD)-based multishot snapshot spectral imaging (DMD-SSI) system as an alternative to current piezostage-based multishot coded aperture snapshot spectral imager (CASSI) systems. In this system, a DMD is used to implement compressive sensing (CS) measurement patterns for reconstructing the spatial/spectral information of an imaging scene. Based on the CS measurement results, we demonstrated the concurrent reconstruction of 24 spectral images. The DMD-SSI system is versatile in nature as it can be used to implement independent CS measurement patterns in addition to spatially shifted patterns that piezostage-based systems can offer. © 2011 Optical Society of America

Information data systems for a global change technology initiative architecture trade study

NASA Technical Reports Server (NTRS)

Murray, Nicholas D.

1991-01-01

The Global Change Technology Initiative (GCTI) was established to develop technology which will enable use of satellite systems of Earth observations on a global scale, enable use of the observations to predictively model Earth's changes, and provide scientists, government, business, and industry with quick access to the resulting information. At LaRC, a GCTI Architecture Trade Study was undertaken to develop and evaluate the architectural implications to meet the requirements of the global change studies and the eventual implementation of a global change system. The output of the trade study are recommended technologies for the GCTI. That portion of the study concerned with the information data system is documented. The information data system for an earth global change modeling system can be very extensive and beyond affordability in terms of today's costs. Therefore, an incremental approach to gaining a system is most likely. An options approach to levels of capability versus needed technologies was developed. The primary drivers of the requirements for the information data system evaluation were the needed science products, the science measurements, the spacecraft orbits, the instruments configurations, and the spacecraft configurations and their attendant architectures. The science products requirements were not studied here; however, some consideration of the product needs were included in the evaluation results. The information data system technology items were identified from the viewpoint of the desirable overall information system characteristics.

Development of a congestion management system using GPS technology : technical summary.

DOT National Transportation Integrated Search

1996-11-01

The overall goal of this research study was to demonstrate the feasibility of using global positioning system (GPS) and geographic information system (GIS) technologies to measure travel time and speed data on urban highways.Compared to more traditio...

Development of a congestion management system using GPS technology : volume I.

DOT National Transportation Integrated Search

1997-04-01

This report describes the results of a study undertaken to demonstrate the feasibility of using global positioning system( GPS) and geographic information system (CIS) technologies to measure travel time and speed data on urban highways. Compared to ...

Accuracy increase of self-compensator

NASA Astrophysics Data System (ADS)

Zhambalova, S. Ts; Vinogradova, A. A.

2018-03-01

In this paper, the authors consider a self-compensation system and a method for increasing its accuracy, without compromising the condition of the information theory of measuring devices. The result can be achieved using the pulse control of the tracking system in the dead zone (the zone of the proportional section of the amplifier's characteristic). Pulse control allows one to increase the control power, but the input signal of the amplifier is infinitesimal. To do this, the authors use the conversion scheme for the input quantity. It is also possible to reduce the dead band, but the system becomes unstable. The amount of information received from the instrument, correcting circuits complicates the system, and, reducing the feedback coefficient dramatically, reduces the speed. Thanks to this, without compromising the measurement condition, the authors increase the accuracy of the self-compensation system. The implementation technique allows increasing the power of the input signal by many orders of magnitude.

Optimal Sensor Layouts in Underwater Locomotory Systems

NASA Astrophysics Data System (ADS)

Colvert, Brendan; Kanso, Eva

2015-11-01

Retrieving and understanding global flow characteristics from local sensory measurements is a challenging but extremely relevant problem in fields such as defense, robotics, and biomimetics. It is an inverse problem in that the goal is to translate local information into global flow properties. In this talk we present techniques for optimization of sensory layouts within the context of an idealized underwater locomotory system. Using techniques from fluid mechanics and control theory, we show that, under certain conditions, local measurements can inform the submerged body about its orientation relative to the ambient flow, and allow it to recognize local properties of shear flows. We conclude by commenting on the relevance of these findings to underwater navigation in engineered systems and live organisms.

Measuring interoperable EHR adoption and maturity: a Canadian example.

PubMed

Gheorghiu, Bobby; Hagens, Simon

2016-01-25

An interoperable electronic health record is a secure consolidated record of an individual's health history and care, designed to facilitate authorized information sharing across the care continuum.  Each Canadian province and territory has implemented such a system and for all, measuring adoption is essential to understanding progress and optimizing use in order to realize intended benefits. About 250,000 health professionals-approximately half of Canada's anticipated potential physician, nurse, pharmacist, and administrative users-indicated that they electronically access data, such as those found in provincial/territorial lab or drug information systems, in 2015.  Trends suggest further growth as maturity of use increases. There is strong interest in health information exchange through the iEHR in Canada, and continued growth in adoption is expected. Central to managing the evolution of digital health is access to robust data about who is using solutions, how they are used, where and when.  Stakeholders such as government, program leads, and health system administrators must critically assess progress and achievement of benefits, to inform future strategic and operational decisions.

How to measure technology assessment: an introduction.

PubMed

Hasman, Arie

2014-01-01

This contribution introduces the Technology Acceptance model. Since information systems are still underutilized, application of models of user acceptance can provide important clues about what can be done to increase system usage.

Geometrical calibration television measuring systems with solid state photodetectors

NASA Astrophysics Data System (ADS)

Matiouchenko, V. G.; Strakhov, V. V.; Zhirkov, A. O.

2000-11-01

The various optical measuring methods for deriving information about the size and form of objects are now used in difference branches- mechanical engineering, medicine, art, criminalistics. Measuring by means of the digital television systems is one of these methods. The development of this direction is promoted by occurrence on the market of various types and costs small-sized television cameras and frame grabbers. There are many television measuring systems using the expensive cameras, but accuracy performances of low cost cameras are also interested for the system developers. For this reason inexpensive mountingless camera SK1004CP (format 1/3', cost up to 40$) and frame grabber Aver2000 were used in experiments.

Optical fiber-based system for continuous measurement of in-bore projectile velocity.

PubMed

Wang, Guohua; Sun, Jinglin; Li, Qiang

2014-08-01

This paper reports the design of an optical fiber-based velocity measurement system and its application in measuring the in-bore projectile velocity. The measurement principle of the implemented system is based on Doppler effect and heterodyne detection technique. The analysis of the velocity measurement principle deduces the relationship between the projectile velocity and the instantaneous frequency (IF) of the optical fiber-based system output signal. To extract the IF of the fast-changing signal carrying the velocity information, an IF extraction algorithm based on the continuous wavelet transforms is detailed. Besides, the performance of the algorithm is analyzed by performing corresponding simulation. At last, an in-bore projectile velocity measurement experiment with a sniper rifle having a 720 m/s muzzle velocity is performed to verify the feasibility of the optical fiber-based velocity measurement system. Experiment results show that the measured muzzle velocity is 718.61 m/s, and the relative uncertainty of the measured muzzle velocity is approximately 0.021%.

Optical fiber-based system for continuous measurement of in-bore projectile velocity

NASA Astrophysics Data System (ADS)

Wang, Guohua; Sun, Jinglin; Li, Qiang

2014-08-01

This paper reports the design of an optical fiber-based velocity measurement system and its application in measuring the in-bore projectile velocity. The measurement principle of the implemented system is based on Doppler effect and heterodyne detection technique. The analysis of the velocity measurement principle deduces the relationship between the projectile velocity and the instantaneous frequency (IF) of the optical fiber-based system output signal. To extract the IF of the fast-changing signal carrying the velocity information, an IF extraction algorithm based on the continuous wavelet transforms is detailed. Besides, the performance of the algorithm is analyzed by performing corresponding simulation. At last, an in-bore projectile velocity measurement experiment with a sniper rifle having a 720 m/s muzzle velocity is performed to verify the feasibility of the optical fiber-based velocity measurement system. Experiment results show that the measured muzzle velocity is 718.61 m/s, and the relative uncertainty of the measured muzzle velocity is approximately 0.021%.

A Socio-technical assessment of the success of picture archiving and communication systems: the radiology technologist’s perspective

PubMed Central

2013-01-01

Background With the increasing prevalence of Picture Archiving and Communication Systems (PACS) in healthcare institutions, there is a growing need to measure their success. However, there is a lack of published literature emphasizing the technical and social factors underlying a successful PACS. Methods An updated Information Systems Success Model was utilized by radiology technologists (RTs) to evaluate the success of PACS at a large medical center in Taiwan. A survey, consisting of 109 questionnaires, was analyzed by Structural Equation Modeling. Results Socio-technical factors (including system quality, information quality, service quality, perceived usefulness, user satisfaction, and PACS dependence) were proven to be effective measures of PACS success. Although the relationship between service quality and perceived usefulness was not significant, other proposed relationships amongst the six measurement parameters of success were all confirmed. Conclusions Managers have an obligation to improve the attributes of PACS. At the onset of its deployment, RTs will have formed their own subjective opinions with regards to its quality (system quality, information quality, and service quality). As these personal concepts are either refuted or reinforced based on personal experiences, RTs will become either satisfied or dissatisfied with PACS, based on their perception of its usefulness or lack of usefulness. A satisfied RT may play a pivotal role in the implementation of PACS in the future. PMID:24053458

Assessing the value of information for long-term structural health monitoring

NASA Astrophysics Data System (ADS)

Pozzi, Matteo; Der Kiureghian, Armen

2011-04-01

In the field of Structural Health Monitoring, tests and sensing systems are intended as tools providing diagnoses, which allow the operator of the facility to develop an efficient maintenance plan or to require extraordinary measures on a structure. The effectiveness of these systems depends directly on their capability to guide towards the most optimal decision for the prevailing circumstances, avoiding mistakes and wastes of resources. Though this is well known, most studies only address the accuracy of the information gained from sensors without discussing economic criteria. Other studies evaluate these criteria separately, with only marginal or heuristic connection with the outcomes of the monitoring system. The concept of "Value of Information" (VoI) provides a rational basis to rank measuring systems according to a utility-based metric, which fully includes the decision-making process affected by the monitoring campaign. This framework allows, for example, an explicit assessment of the economical justifiability of adopting a sensor depending on its precision. In this paper we outline the framework for assessing the VoI, as applicable to the ranking of competitive measuring systems. We present the basic concepts involved, highlight issues related to monitoring of civil structures, address the problem of non-linearity of the cost-to-utility mapping, and introduce an approximate Monte Carlo approach suitable for the implementation of time-consuming predictive models.

A Map/INS/Wi-Fi Integrated System for Indoor Location-Based Service Applications

PubMed Central

Yu, Chunyang; Lan, Haiyu; Gu, Fuqiang; Yu, Fei; El-Sheimy, Naser

2017-01-01

In this research, a new Map/INS/Wi-Fi integrated system for indoor location-based service (LBS) applications based on a cascaded Particle/Kalman filter framework structure is proposed. Two-dimension indoor map information, together with measurements from an inertial measurement unit (IMU) and Received Signal Strength Indicator (RSSI) value, are integrated for estimating positioning information. The main challenge of this research is how to make effective use of various measurements that complement each other in order to obtain an accurate, continuous, and low-cost position solution without increasing the computational burden of the system. Therefore, to eliminate the cumulative drift caused by low-cost IMU sensor errors, the ubiquitous Wi-Fi signal and non-holonomic constraints are rationally used to correct the IMU-derived navigation solution through the extended Kalman Filter (EKF). Moreover, the map-aiding method and map-matching method are innovatively combined to constrain the primary Wi-Fi/IMU-derived position through an Auxiliary Value Particle Filter (AVPF). Different sources of information are incorporated through a cascaded structure EKF/AVPF filter algorithm. Indoor tests show that the proposed method can effectively reduce the accumulation of positioning errors of a stand-alone Inertial Navigation System (INS), and provide a stable, continuous and reliable indoor location service. PMID:28574471

A Map/INS/Wi-Fi Integrated System for Indoor Location-Based Service Applications.

PubMed

Yu, Chunyang; Lan, Haiyu; Gu, Fuqiang; Yu, Fei; El-Sheimy, Naser

2017-06-02

In this research, a new Map/INS/Wi-Fi integrated system for indoor location-based service (LBS) applications based on a cascaded Particle/Kalman filter framework structure is proposed. Two-dimension indoor map information, together with measurements from an inertial measurement unit (IMU) and Received Signal Strength Indicator (RSSI) value, are integrated for estimating positioning information. The main challenge of this research is how to make effective use of various measurements that complement each other in order to obtain an accurate, continuous, and low-cost position solution without increasing the computational burden of the system. Therefore, to eliminate the cumulative drift caused by low-cost IMU sensor errors, the ubiquitous Wi-Fi signal and non-holonomic constraints are rationally used to correct the IMU-derived navigation solution through the extended Kalman Filter (EKF). Moreover, the map-aiding method and map-matching method are innovatively combined to constrain the primary Wi-Fi/IMU-derived position through an Auxiliary Value Particle Filter (AVPF). Different sources of information are incorporated through a cascaded structure EKF/AVPF filter algorithm. Indoor tests show that the proposed method can effectively reduce the accumulation of positioning errors of a stand-alone Inertial Navigation System (INS), and provide a stable, continuous and reliable indoor location service.

Minimization of the energy loss of nuclear power plants in case of partial in-core monitoring system failure

NASA Astrophysics Data System (ADS)

Zagrebaev, A. M.; Ramazanov, R. N.; Lunegova, E. A.

2017-01-01

In this paper we consider the optimization problem minimize of the energy loss of nuclear power plants in case of partial in-core monitoring system failure. It is possible to continuation of reactor operation at reduced power or total replacement of the channel neutron measurements, requiring shutdown of the reactor and the stock of detectors. This article examines the reconstruction of the energy release in the core of a nuclear reactor on the basis of the indications of height sensors. The missing measurement information can be reconstructed by mathematical methods, and replacement of the failed sensors can be avoided. It is suggested that a set of ‘natural’ functions determined by means of statistical estimates obtained from archival data be constructed. The procedure proposed makes it possible to reconstruct the field even with a significant loss of measurement information. Improving the accuracy of the restoration of the neutron flux density in partial loss of measurement information to minimize the stock of necessary components and the associated losses.

Precipitation Measurements From Space: Workshop report. An element of the climate observing system study

NASA Technical Reports Server (NTRS)

Atlas, D. (Editor); Thiele, O. W. (Editor)

1981-01-01

Global climate, agricultural uses for precipitation information, hydrological uses for precipitation, severe thunderstorms and local weather, global weather are addressed. Ground truth measurement, visible and infrared techniques, microwave radiometry and hybrid precipitation measurements, and spaceborne radar are discussed.

Bibliography on methods of atmospheric visibility measurements relevant to air traffic control and related subjects

DOT National Transportation Integrated Search

1973-11-30

The bibliographical survey provides reference information and background material to assist in the selection of principles and measuring techniques which may be used in the development of future systems to measure Runway Visual Range (RVR), Slant Vis...

Bone Analyzer

NASA Technical Reports Server (NTRS)

1985-01-01

The danger of disuse osteoporosis under weightless condition in space led to extensive research into measurements of bone stiffness and mass by the Biomedical Research Division of Ames and Stanford University. Through its Technology Utilization Program, NASA funded an advanced SOBSA, a microprocessor-controlled bone probe system. SOBSA determines bone stiffness by measuring responses to an electromagnetic shaker. With this information, a physician can identify bone disease, measure deterioration and prescribe necessary therapy. The system is now undergoing further testing.

[Breast cancer screening process indicators in Mexico: a case study].

PubMed

Uscanga-Sánchez, Santos; Torres-Mejía, Gabriela; Ángeles-Llerenas, Angélica; Domínguez-Malpica, Raúl; Lazcano-Ponce, Eduardo

2014-01-01

To identify, measure and compare the performance indicators of productivity, effective access and quality service for the early detection breast cancer program in Mexico. By means of a study case based on the 2011 Women Cancer Information System (SICAM), the indicators were measured and compared with the Mexican official standard NOM-041-SSA2-2011 and international standards. The analysis showed insufficient installed capacity (37%), low coverage in screening (15%), diagnostic evaluation (16%), biopsy (44%) and treatment (57%), and very low effectiveness in confirmed cases by the total number of screening mammograms performed (0.04%). There was no information available, from SICAM, to estimate the rest of the indicators proposed. Efficient health information systems are required in order to monitor indicators and generate performance observatories of screening programs.

ϕ Meson Measurements at RHIC with the PHENIX Detector

NASA Astrophysics Data System (ADS)

Sarsour, Murad

2018-02-01

The measurement of ϕ mesons provides key information on the phase of the hot and dense medium created in the relativistic heavy ion collisions. It has a relatively small hadronic interaction cross section and is sensitive to the increase of strangeness (strangeness enhancement), a phenomenon associated with soft particles in bulk matter. Measurements in the dilepton channels are especially interesting since leptons interact only electromagnetically, thus carrying the information from their production phase directly to the detector. Measurements in different nucleus-nucleus collisions allow us to perform a systematic study of the nuclear medium effects on ϕ meson production. The PHENIX detector provides the capabilities to measure the ϕ meson production in a wide range of transverse momentum and rapidity to study these effects. In this proceeding, we present measurements of the ϕ mesons in a variety of collision systems at = 200 GeV. In case of small systems, the data are compared with AMPT calculations to study the various cold nuclear medium effects involved in ϕ meson production.

Design and application of pulse information acquisition and analysis system with dynamic recognition in traditional Chinese medicine.

PubMed

Zhang, Jian; Niu, Xin; Yang, Xue-zhi; Zhu, Qing-wen; Li, Hai-yan; Wang, Xuan; Zhang, Zhi-guo; Sha, Hong

2014-09-01

To design the pulse information which includes the parameter of pulse-position, pulse-number, pulse-shape and pulse-force acquisition and analysis system with function of dynamic recognition, and research the digitalization and visualization of some common cardiovascular mechanism of single pulse. To use some flexible sensors to catch the radial artery pressure pulse wave and utilize the high frequency B mode ultrasound scanning technology to synchronously obtain the information of radial extension and axial movement, by the way of dynamic images, then the gathered information was analyzed and processed together with ECG. Finally, the pulse information acquisition and analysis system was established which has the features of visualization and dynamic recognition, and it was applied to serve for ten healthy adults. The new system overcome the disadvantage of one-dimensional pulse information acquisition and process method which was common used in current research area of pulse diagnosis in traditional Chinese Medicine, initiated a new way of pulse diagnosis which has the new features of dynamic recognition, two-dimensional information acquisition, multiplex signals combination and deep data mining. The newly developed system could translate the pulse signals into digital, visual and measurable motion information of vessel.