Design and information requirements for travel and tourism needs on scenic byways.

DOT National Transportation Integrated Search

1994-01-01

The purpose of this study was to develop a system design and information evaluation process that could be used to review proposed or designated scenic byways. The process was intended to ensure that the geometric and traffic design of these roads wer...

Building Type Basics for Elementary and Secondary Schools.

ERIC Educational Resources Information Center

Perkins, Bradford

This book provides the essential information architects need to fast-start a school design process and shares what leading architects have learned about elementary and secondary school design. It provides critical information on the process, potential problems, design concerns, and recent trends in school design, along with complete coverage of…

Virtual design and construction of plumbing systems

NASA Astrophysics Data System (ADS)

Filho, João Bosco P. Dantas; Angelim, Bruno Maciel; Guedes, Joana Pimentel; de Castro, Marcelo Augusto Farias; Neto, José de Paula Barros

2016-12-01

Traditionally, the design coordination process is carried out by overlaying and comparing 2D drawings made by different project participants. Detecting information errors from a composite drawing is especially challenging and error prone. This procedure usually leaves many design errors undetected until construction begins, and typically lead to rework. Correcting conflict issues, which were not identified during design and coordination phase, reduces the overall productivity for everyone involved in the construction process. The identification of construction issues in the field generate Request for Information (RFIs) that is one of delays causes. The application of Virtual Design and Construction (VDC) tools to the coordination processes can bring significant value to architecture, structure, and mechanical, electrical, and plumbing (MEP) designs in terms of a reduced number of errors undetected and requests for information. This paper is focused on evaluating requests for information (RFI) associated with water/sanitary facilities of a BIM model. Thus, it is expected to add improvements of water/sanitary facility designs, as well as to assist the virtual construction team to notice and identify design problems. This is an exploratory and descriptive research. A qualitative methodology is used. This study adopts RFI's classification in six analyzed categories: correction, omission, validation of information, modification, divergence of information and verification. The results demonstrate VDC's contribution improving the plumbing system designs. Recommendations are suggested to identify and avoid these RFI types in plumbing system design process or during virtual construction.

Information Design Theories

ERIC Educational Resources Information Center

Pettersson, Rune

2014-01-01

Information design has practical and theoretical components. As an academic discipline we may view information design as a combined discipline, a practical theory, or as a theoretical practice. So far information design has incorporated facts, influences, methods, practices, principles, processes, strategies, and tools from a large number of…

Development of integrated programs for Aerospace-vehicle Design (IPAD): Product program management systems

NASA Technical Reports Server (NTRS)

Isenberg, J. M.; Southall, J. W.

1979-01-01

The Integrated Programs for Aerospace Vehicle Design (IPAD) is a computing system to support company-wide design information processing. This document presents a brief description of the management system used to direct and control a product-oriented program. This document, together with the reference design process (CR 2981) and the manufacture interactions with the design process (CR 2982), comprises the reference information that forms the basis for specifying IPAD system requirements.

The Contribution of Cognitive Engineering to the Effective Design and Use of Information Systems.

ERIC Educational Resources Information Center

Garg-Janardan, Chaya; Salvendy, Gavriel

1986-01-01

Examines the role of human information processing and decision-making capabilities and limitations in the design of effective human-computer interfaces. Several cognitive engineering principles that should guide the design process are outlined. (48 references) (Author/CLB)

Mechanoluminescence assisting agile optimization of processing design on surgical epiphysis plates

NASA Astrophysics Data System (ADS)

Terasaki, Nao; Toyomasu, Takashi; Sonohata, Motoki

2018-04-01

We propose a novel method for agile optimization of processing design by visualization of mechanoluminescence. To demonstrate the effect of the new method, epiphysis plates were processed to form dots (diameters: 1 and 1.5 mm) and the mechanical information was evaluated. As a result, the appearance of new strain concentration was successfully visualized on the basis of mechanoluminescence, and complex mechanical information was instinctively understood by surgeons as the designers. In addition, it was clarified by mechanoluminescence analysis that small dots do not have serious mechanical effects such as strength reduction. Such detail mechanical information evaluated on the basis of mechanoluminescence was successfully applied to the judgement of the validity of the processing design. This clearly proves the effectiveness of the new methodology using mechanoluminescence for assisting agile optimization of the processing design.

A Framework for Preliminary Design of Aircraft Structures Based on Process Information. Part 1

NASA Technical Reports Server (NTRS)

Rais-Rohani, Masoud

1998-01-01

This report discusses the general framework and development of a computational tool for preliminary design of aircraft structures based on process information. The described methodology is suitable for multidisciplinary design optimization (MDO) activities associated with integrated product and process development (IPPD). The framework consists of three parts: (1) product and process definitions; (2) engineering synthesis, and (3) optimization. The product and process definitions are part of input information provided by the design team. The backbone of the system is its ability to analyze a given structural design for performance as well as manufacturability and cost assessment. The system uses a database on material systems and manufacturing processes. Based on the identified set of design variables and an objective function, the system is capable of performing optimization subject to manufacturability, cost, and performance constraints. The accuracy of the manufacturability measures and cost models discussed here depend largely on the available data on specific methods of manufacture and assembly and associated labor requirements. As such, our focus in this research has been on the methodology itself and not so much on its accurate implementation in an industrial setting. A three-tier approach is presented for an IPPD-MDO based design of aircraft structures. The variable-complexity cost estimation methodology and an approach for integrating manufacturing cost assessment into design process are also discussed. This report is presented in two parts. In the first part, the design methodology is presented, and the computational design tool is described. In the second part, a prototype model of the preliminary design Tool for Aircraft Structures based on Process Information (TASPI) is described. Part two also contains an example problem that applies the methodology described here for evaluation of six different design concepts for a wing spar.

What Is Information Design?

ERIC Educational Resources Information Center

Redish, Janice C. (Ginny)

2000-01-01

Defines two meanings of information design: the overall process of developing a successful document; and the way the information is presented on the screen (layout, typography, color, and so forth). Discusses the future importance of both of these meanings of information design, in terms of design for the web and single-sources (planning…

Information Flow in the Launch Vehicle Design/Analysis Process

NASA Technical Reports Server (NTRS)

Humphries, W. R., Sr.; Holland, W.; Bishop, R.

1999-01-01

This paper describes the results of a team effort aimed at defining the information flow between disciplines at the Marshall Space Flight Center (MSFC) engaged in the design of space launch vehicles. The information flow is modeled at a first level and is described using three types of templates: an N x N diagram, discipline flow diagrams, and discipline task descriptions. It is intended to provide engineers with an understanding of the connections between what they do and where it fits in the overall design process of the project. It is also intended to provide design managers with a better understanding of information flow in the launch vehicle design cycle.

Leveraging health information exchange to improve population health reporting processes: lessons in using a collaborative-participatory design process.

PubMed

Revere, Debra; Dixon, Brian E; Hills, Rebecca; Williams, Jennifer L; Grannis, Shaun J

2014-01-01

Surveillance, or the systematic monitoring of disease within a population, is a cornerstone function of public health. Despite significant investment in information technologies (IT) to improve the public's health, health care providers continue to rely on manual, spontaneous reporting processes that can result in incomplete and delayed surveillance activities. Participatory design principles advocate including real users and stakeholders when designing an information system to ensure high ecological validity of the product, incorporate relevance and context into the design, reduce misconceptions designers can make due to insufficient domain expertise, and ultimately reduce barriers to adoption of the system. This paper focuses on the collaborative and informal participatory design process used to develop enhanced, IT-enabled reporting processes that leverage available electronic health records in a health information exchange to prepopulate notifiable-conditions report forms used by public health authorities. Over nine months, public health stakeholders, technical staff, and informatics researchers were engaged in a multiphase participatory design process that included public health stakeholder focus groups, investigator-engineering team meetings, public health survey and census regarding high-priority data elements, and codesign of exploratory prototypes and final form mock-ups. A number of state-mandated report fields that are not highly used or desirable for disease investigation were eliminated, which allowed engineers to repurpose form space for desired and high-priority data elements and improve the usability of the forms. Our participatory design process ensured that IT development was driven by end user expertise and needs, resulting in significant improvements to the layout and functionality of the reporting forms. In addition to informing report form development, engaging with public health end users and stakeholders through the participatory design process provided new insights into public health workflow and allowed the team to quickly triage user requests while managing user expectations within the realm of engineering possibilities. Engaging public health, engineering staff, and investigators in a shared codesigning process ensured that the new forms will not only meet real-life needs but will also support development of a product that will be adopted and, ultimately, improve communicable and infectious disease reporting by clinicians to public health.

Networking Sensors for Information Dominance - Joint Signal Processing and Communication Design

DTIC Science & Technology

2012-01-01

2012 4. TITLE AND SUBTITLE NETWORKING SENSORS FOR INFORMATION DOMINANCE - JOINT SIGNAL PROCESSING AND COMMUNICATION DESIGN, Final Report for FA9550...Rev. 2-89) Prescribed by ANSI Std. Z39-18 298-102 Public A AFRL-OSR-VA-TR-2012-0729 NETWORKING SENSORS FOR INFORMATION DOMINANCE - JOINT

Image-plane processing of visual information

NASA Technical Reports Server (NTRS)

Huck, F. O.; Fales, C. L.; Park, S. K.; Samms, R. W.

1984-01-01

Shannon's theory of information is used to optimize the optical design of sensor-array imaging systems which use neighborhood image-plane signal processing for enhancing edges and compressing dynamic range during image formation. The resultant edge-enhancement, or band-pass-filter, response is found to be very similar to that of human vision. Comparisons of traits in human vision with results from information theory suggest that: (1) Image-plane processing, like preprocessing in human vision, can improve visual information acquisition for pattern recognition when resolving power, sensitivity, and dynamic range are constrained. Improvements include reduced sensitivity to changes in lighter levels, reduced signal dynamic range, reduced data transmission and processing, and reduced aliasing and photosensor noise degradation. (2) Information content can be an appropriate figure of merit for optimizing the optical design of imaging systems when visual information is acquired for pattern recognition. The design trade-offs involve spatial response, sensitivity, and sampling interval.

High School Student Information Access and Engineering Design Performance

ERIC Educational Resources Information Center

Mentzer, Nathan

2014-01-01

Developing solutions to engineering design problems requires access to information. Research has shown that appropriately accessing and using information in the design process improves solution quality. This quasi-experimental study provides two groups of high school students with a design problem in a three hour design experience. One group has…

Motivating the Notion of Generic Design within Information Processing Theory: The Design Problem Space.

ERIC Educational Resources Information Center

Goel, Vinod; Pirolli, Peter

The notion of generic design, while it has been around for 25 years, is not often articulated, especially within Newell and Simon's (1972) Information Processing Theory framework. Design is merely lumped in with other forms of problem solving activity. Intuitively it is felt that there should be a level of description of the phenomenon which…

OPERATIONS RESEARCH IN THE DESIGN OF MANAGEMENT INFORMATION SYSTEMS

DTIC Science & Technology

management information systems is concerned with the identification and detailed specification of the information and data processing...of advanced data processing techniques in management information systems today, the close coordination of operations research and data systems activities has become a practical necessity for the modern business firm.... information systems in which mathematical models are employed as the basis for analysis and systems design. Operations research provides a

Generic Tasks for Knowledge-Based Problem Solving: Extension and New Directions

DTIC Science & Technology

1991-02-01

Report. i 3] D. Brown and B. Chandrasekaran. Design: An information processing level analy- sis. In Design Problem Solving: Knowledge Structures and...generic information processing tasks. In Proceedings of the Internaoional Joint Conference on Artificial Inte!lzjence. IJCAI, 1987. [181 B...Chandrasekaran. What kind of information processing is intelligence? a perspective I on ai paradigms and a proposal. In D. Partridge and Y. Wilks, editors

Contingency theoretic methodology for agent-based web-oriented manufacturing systems

NASA Astrophysics Data System (ADS)

Durrett, John R.; Burnell, Lisa J.; Priest, John W.

2000-12-01

The development of distributed, agent-based, web-oriented, N-tier Information Systems (IS) must be supported by a design methodology capable of responding to the convergence of shifts in business process design, organizational structure, computing, and telecommunications infrastructures. We introduce a contingency theoretic model for the use of open, ubiquitous software infrastructure in the design of flexible organizational IS. Our basic premise is that developers should change in the way they view the software design process from a view toward the solution of a problem to one of the dynamic creation of teams of software components. We postulate that developing effective, efficient, flexible, component-based distributed software requires reconceptualizing the current development model. The basic concepts of distributed software design are merged with the environment-causes-structure relationship from contingency theory; the task-uncertainty of organizational- information-processing relationships from information processing theory; and the concept of inter-process dependencies from coordination theory. Software processes are considered as employees, groups of processes as software teams, and distributed systems as software organizations. Design techniques already used in the design of flexible business processes and well researched in the domain of the organizational sciences are presented. Guidelines that can be utilized in the creation of component-based distributed software will be discussed.

Research on Design Information Management System for Leather Goods

NASA Astrophysics Data System (ADS)

Lu, Lei; Peng, Wen-li

The idea of setting up a design information management system of leather goods was put forward to solve the problems existed in current information management of leather goods. Working principles of the design information management system for leather goods were analyzed in detail. Firstly, the acquiring approach of design information of leather goods was introduced. Secondly, the processing methods of design information were introduced. Thirdly, the management of design information in database was studied. Finally, the application of the system was discussed by taking the shoes products as an example.

Electronic-Power-Transformer Design Guide

NASA Technical Reports Server (NTRS)

Schwarze, G. E.; Lagadinos, J. C.; Ahearn, J. F.

1983-01-01

Compilation of information on design procedures, electrical properties, and fabrication. Guide provides information on design procedures; magnetic and insulating material electrical properties; impregnating, encapsulating and processing techniques.

DREAMS and IMAGE: A Model and Computer Implementation for Concurrent, Life-Cycle Design of Complex Systems

NASA Technical Reports Server (NTRS)

Hale, Mark A.; Craig, James I.; Mistree, Farrokh; Schrage, Daniel P.

1995-01-01

Computing architectures are being assembled that extend concurrent engineering practices by providing more efficient execution and collaboration on distributed, heterogeneous computing networks. Built on the successes of initial architectures, requirements for a next-generation design computing infrastructure can be developed. These requirements concentrate on those needed by a designer in decision-making processes from product conception to recycling and can be categorized in two areas: design process and design information management. A designer both designs and executes design processes throughout design time to achieve better product and process capabilities while expanding fewer resources. In order to accomplish this, information, or more appropriately design knowledge, needs to be adequately managed during product and process decomposition as well as recomposition. A foundation has been laid that captures these requirements in a design architecture called DREAMS (Developing Robust Engineering Analysis Models and Specifications). In addition, a computing infrastructure, called IMAGE (Intelligent Multidisciplinary Aircraft Generation Environment), is being developed that satisfies design requirements defined in DREAMS and incorporates enabling computational technologies.

Investigating the Use of 3d Geovisualizations for Urban Design in Informal Settlement Upgrading in South Africa

NASA Astrophysics Data System (ADS)

Rautenbach, V.; Coetzee, S.; Çöltekin, A.

2016-06-01

Informal settlements are a common occurrence in South Africa, and to improve in-situ circumstances of communities living in informal settlements, upgrades and urban design processes are necessary. Spatial data and maps are essential throughout these processes to understand the current environment, plan new developments, and communicate the planned developments. All stakeholders need to understand maps to actively participate in the process. However, previous research demonstrated that map literacy was relatively low for many planning professionals in South Africa, which might hinder effective planning. Because 3D visualizations resemble the real environment more than traditional maps, many researchers posited that they would be easier to interpret. Thus, our goal is to investigate the effectiveness of 3D geovisualizations for urban design in informal settlement upgrading in South Africa. We consider all involved processes: 3D modelling, visualization design, and cognitive processes during map reading. We found that procedural modelling is a feasible alternative to time-consuming manual modelling, and can produce high quality models. When investigating the visualization design, the visual characteristics of 3D models and relevance of a subset of visual variables for urban design activities of informal settlement upgrades were qualitatively assessed. The results of three qualitative user experiments contributed to understanding the impact of various levels of complexity in 3D city models and map literacy of future geoinformatics and planning professionals when using 2D maps and 3D models. The research results can assist planners in designing suitable 3D models that can be used throughout all phases of the process.

Image gathering and processing - Information and fidelity

NASA Technical Reports Server (NTRS)

Huck, F. O.; Fales, C. L.; Halyo, N.; Samms, R. W.; Stacy, K.

1985-01-01

In this paper we formulate and use information and fidelity criteria to assess image gathering and processing, combining optical design with image-forming and edge-detection algorithms. The optical design of the image-gathering system revolves around the relationship among sampling passband, spatial response, and signal-to-noise ratio (SNR). Our formulations of information, fidelity, and optimal (Wiener) restoration account for the insufficient sampling (i.e., aliasing) common in image gathering as well as for the blurring and noise that conventional formulations account for. Performance analyses and simulations for ordinary optical-design constraints and random scences indicate that (1) different image-forming algorithms prefer different optical designs; (2) informationally optimized designs maximize the robustness of optimal image restorations and lead to the highest-spatial-frequency channel (relative to the sampling passband) for which edge detection is reliable (if the SNR is sufficiently high); and (3) combining the informationally optimized design with a 3 by 3 lateral-inhibitory image-plane-processing algorithm leads to a spatial-response shape that approximates the optimal edge-detection response of (Marr's model of) human vision and thus reduces the data preprocessing and transmission required for machine vision.

Knowledge Interaction Design for Creative Knowledge Work

NASA Astrophysics Data System (ADS)

Nakakoji, Kumiyo; Yamamoto, Yasuhiro

This paper describes our approach for the development of application systems for creative knowledge work, particularly for early stages of information design tasks. Being a cognitive tool serving as a means of externalization, an application system affects how the user is engaged in the creative process through its visual interaction design. Knowledge interaction design described in this paper is a framework where a set of application systems for different information design domains are developed based on an interaction model, which is designed for a particular model of a thinking process. We have developed two sets of application systems using the knowledge interaction design framework: one includes systems for linear information design, such as writing, movie-editing, and video-analysis; the other includes systems for network information design, such as file-system navigation and hypertext authoring. Our experience shows that the resulting systems encourage users to follow a certain cognitive path through graceful user experience.

Transforming Higher Education and Student Engagement through Collaborative Review to Inform Educational Design

ERIC Educational Resources Information Center

von Konsky, Brian R.; Martin, Romana; Bolt, Susan; Broadley, Tania; Ostashewski, Nathaniel

2014-01-01

This paper reports on staff perceptions arising from a review process designed to assist staff in making informed decisions regarding educational design, approaches to engage students in learning, and the technology to support engagement in the classroom and across multiple locations and delivery modes. The aim of the review process was to…

Collaborative Course Design: Changing the Process, Acknowledging the Context, and Implications for Academic Development

ERIC Educational Resources Information Center

Ziegenfuss, Donna Harp; Lawler, Patricia A.

2008-01-01

This research study describes the experiences and perceptions of an instructor and an instructional design specialist who collaborated on the design and implementation of a university course using a new course design process. Findings uncovered differences between an informal collaboration process and the adaptation of that process for…

Leveraging Health Information Exchange to Improve Population Health Reporting Processes: Lessons in Using a Collaborative-Participatory Design Process

PubMed Central

Revere, Debra; Dixon, Brian E.; Hills, Rebecca; Williams, Jennifer L.; Grannis, Shaun J.

2014-01-01

Introduction: Surveillance, or the systematic monitoring of disease within a population, is a cornerstone function of public health. Despite significant investment in information technologies (IT) to improve the public’s health, health care providers continue to rely on manual, spontaneous reporting processes that can result in incomplete and delayed surveillance activities. Background: Participatory design principles advocate including real users and stakeholders when designing an information system to ensure high ecological validity of the product, incorporate relevance and context into the design, reduce misconceptions designers can make due to insufficient domain expertise, and ultimately reduce barriers to adoption of the system. This paper focuses on the collaborative and informal participatory design process used to develop enhanced, IT-enabled reporting processes that leverage available electronic health records in a health information exchange to prepopulate notifiable-conditions report forms used by public health authorities. Methods: Over nine months, public health stakeholders, technical staff, and informatics researchers were engaged in a multiphase participatory design process that included public health stakeholder focus groups, investigator-engineering team meetings, public health survey and census regarding high-priority data elements, and codesign of exploratory prototypes and final form mock-ups. Findings: A number of state-mandated report fields that are not highly used or desirable for disease investigation were eliminated, which allowed engineers to repurpose form space for desired and high-priority data elements and improve the usability of the forms. Our participatory design process ensured that IT development was driven by end user expertise and needs, resulting in significant improvements to the layout and functionality of the reporting forms. Discussion: In addition to informing report form development, engaging with public health end users and stakeholders through the participatory design process provided new insights into public health workflow and allowed the team to quickly triage user requests while managing user expectations within the realm of engineering possibilities. Conclusion: Engaging public health, engineering staff, and investigators in a shared codesigning process ensured that the new forms will not only meet real-life needs but will also support development of a product that will be adopted and, ultimately, improve communicable and infectious disease reporting by clinicians to public health. PMID:25848615

CENSUS DESIGNATED PLACE AND FEDERAL INFORMATION PROCESSING STANDARD (FIPS) POPULATED PLACEBOUNDARIES FOR THE STATE OF ARIZONA

EPA Science Inventory

This data set consists of Census Designated Place and Federal Information Processing Standard (FIPS) Populated Place boundaries for the State of Arizona which were extracted from the 1992 U.S. Census Bureau TIGER line files.

ALARA radiation considerations for the AP600 reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lau, F.L.

1995-03-01

The radiation design of the AP600 reactor plant is based on an average annual occupational radiation exposure (ORE) of 100 man-rem. As a design goal we have established a lower value of 70 man-rem per year. And, with our current design process, we expect to achieve annual exposures which are well below this goal. To accomplish our goal we have established a process that provides criteria, guidelines and customer involvement to achieve the desired result. The criteria and guidelines provide the shield designer, as well as the systems and plant layout designers with information that will lead to an integratedmore » plant design that minimizes personnel exposure and yet is not burdened with complicated shielding or unnecessary component access limitations. Customer involvement is provided in the form of utility input, design reviews and information exchange. Cooperative programs with utilities in the development of specific systems or processes also provides for an ALARA design. The results are features which include ALARA radiation considerations as an integral part of the plant design and a lower plant ORE. It is anticipated that a further reduction in plant personnel exposures will result through good radiological practices by the plant operators. The information in place to support and direct the plant designers includes the Utility Requirements Document (URD), Federal Regulations, ALARA guidelines, radiation design information and radiation and shielding design criteria. This information, along with the utility input, design reviews and information feedback, will contribute to the reduction of plant radiation exposure levels such that they will be less than the stated goals.« less

Toward a Theory of Information Processing in Teaching.

ERIC Educational Resources Information Center

Joyce, Bruce

1978-01-01

Major concepts of information processing in teaching were reviewed, and a proposed framework was designed. The author contends that teachers' information processing primarily affects long term decisions, flow of activities, and the selection of materials. (Author/JKS)

Technology and development requirements for advanced coal conversion systems

NASA Technical Reports Server (NTRS)

1981-01-01

A compendium of coal conversion process descriptions is presented. The SRS and MC data bases were utilized to provide information paticularly in the areas of existing process designs and process evaluations. Additional information requirements were established and arrangements were made to visit process developers, pilot plants, and process development units to obtain information that was not otherwise available. Plant designs, process descriptions and operating conditions, and performance characteristics were analyzed and requirements for further development identified and evaluated to determine the impact of these requirements on the process commercialization potential from the standpoint of economics and technical feasibility. A preliminary methodology was established for the comparative technical and economic assessment of advanced processes.

The visual information system

Treesearch

Merlyn J. Paulson

1979-01-01

This paper outlines a project level process (V.I.S.) which utilizes very accurate and flexible computer algorithms in combination with contemporary site analysis and design techniques for visual evaluation, design and management. The process provides logical direction and connecting bridges through problem identification, information collection and verification, visual...

29 CFR 1910.119 - Process safety management of highly hazardous chemicals.

Code of Federal Regulations, 2011 CFR

2011-07-01

... complexity of the process will influence the decision as to the appropriate PHA methodology to use. All PHA... process hazard analysis in sufficient detail to support the analysis. (3) Information pertaining to the...) Relief system design and design basis; (E) Ventilation system design; (F) Design codes and standards...

29 CFR 1910.119 - Process safety management of highly hazardous chemicals.

Code of Federal Regulations, 2010 CFR

2010-07-01

... complexity of the process will influence the decision as to the appropriate PHA methodology to use. All PHA... process hazard analysis in sufficient detail to support the analysis. (3) Information pertaining to the...) Relief system design and design basis; (E) Ventilation system design; (F) Design codes and standards...

Computer Aided Process Planning (CAPP): The User Interface for the Fabrication Module of the Rapid Design System

DTIC Science & Technology

1991-01-01

plan. The Fabrication Planning Module automatically creates a plan using information from the Feature Based Design Environment (FBDE) of the RDS. It...llll By using the user Interface, the final process plan can be modified in many different ways. The translation of a design feature to a more...for the review and modification of a process plan. The Fabrication Planning Module automatically creates a plan using information from the Feature Based

Working memory and the design of health materials: a cognitive factors perspective.

PubMed

Wilson, Elizabeth A H; Wolf, Michael S

2009-03-01

Working memory and other supportive cognitive processes involved in learning are reviewed in the context of developing patient education materials. We specifically focus on the impact of certain design factors such as text format and syntax, the inclusion of images, and the choice of modality on individuals' ability to understand and remember health information. A selective review of relevant cognitive and learning theories is discussed with regard to their potential impact on the optimal design of health materials. Working memory is measured as an individual's capacity to hold and manipulate information in active consciousness. It is limited by necessity, and well-designed health materials can effectively minimize extraneous cognitive demands placed on individuals, making working memory resources more available to better process content-related information. Further research is needed to evaluate specific design principles and identify ideal uses of print versus video-based forms of communication for conveying information. The process of developing health materials should account for the cognitive demands that extrinsic factors such as modality place on patients.

Engineering Design Thinking and Information Gathering. Final Report. Research in Engineering and Technology Education

ERIC Educational Resources Information Center

Mentzer, Nathan

2011-01-01

The objective of this research was to explore the relationship between information access and design solution quality of high school students presented with an engineering design problem. This objective is encompassed in the research question driving this inquiry: How does information access impact the design process? This question has emerged in…

Design Knowledge Management System (DKMS) Beta Test Report

DTIC Science & Technology

1992-11-01

design process. These problems, which include knowledge representation, constraint propagation, model design, and information integration, are...effective delivery of life-cycle engineering knowledge assistance and information to the design/engineering activities. It does not matter whether these...platfomi. 4. Reuse - existing data, information , and knowledge can be reused. 5. Remote Execution -- automatically handles remote execution without

Implementing an Antibiotic Stewardship Information System to Improve Hospital Infection Control: A Co-Design Process.

PubMed

Maia, Mélanie R; Simões, Alexandra; Lapão, Luís V

2018-01-01

HAITooL information system design and implementation was based on Design Science Research Methodology, ensuring full participation, in close collaboration, of researchers and a multidisciplinary team of healthcare professionals. HAITooL enables effective monitoring of antibiotic resistance, antibiotic use and provides an antibiotic prescription decision-supporting system by clinicians, strengthening the patient safety procedures. The design, development and implementation process reveals benefits in organizational and behavior change with significant success. Leadership commitment multidisciplinary team and mainly informaticians engagement was crucial to the implementation process. Participants' motivation and the final product delivery and evolution depends on that.

Risk Informed Design as Part of the Systems Engineering Process

NASA Technical Reports Server (NTRS)

Deckert, George

2010-01-01

This slide presentation reviews the importance of Risk Informed Design (RID) as an important feature of the systems engineering process. RID is based on the principle that risk is a design commodity such as mass, volume, cost or power. It also reviews Probabilistic Risk Assessment (PRA) as it is used in the product life cycle in the development of NASA's Constellation Program.

Conceptual models of information processing

NASA Technical Reports Server (NTRS)

Stewart, L. J.

1983-01-01

The conceptual information processing issues are examined. Human information processing is defined as an active cognitive process that is analogous to a system. It is the flow and transformation of information within a human. The human is viewed as an active information seeker who is constantly receiving, processing, and acting upon the surrounding environmental stimuli. Human information processing models are conceptual representations of cognitive behaviors. Models of information processing are useful in representing the different theoretical positions and in attempting to define the limits and capabilities of human memory. It is concluded that an understanding of conceptual human information processing models and their applications to systems design leads to a better human factors approach.

Advanced Information Processing System (AIPS) proof-of-concept system functional design I/O network system services

NASA Technical Reports Server (NTRS)

1985-01-01

The function design of the Input/Output (I/O) services for the Advanced Information Processing System (AIPS) proof of concept system is described. The data flow diagrams, which show the functional processes in I/O services and the data that flows among them, are contained. A complete list of the data identified on the data flow diagrams and in the process descriptions are provided.

A methodology proposal for collaborative business process elaboration using a model-driven approach

NASA Astrophysics Data System (ADS)

Mu, Wenxin; Bénaben, Frédérick; Pingaud, Hervé

2015-05-01

Business process management (BPM) principles are commonly used to improve processes within an organisation. But they can equally be applied to supporting the design of an Information System (IS). In a collaborative situation involving several partners, this type of BPM approach may be useful to support the design of a Mediation Information System (MIS), which would ensure interoperability between the partners' ISs (which are assumed to be service oriented). To achieve this objective, the first main task is to build a collaborative business process cartography. The aim of this article is to present a method for bringing together collaborative information and elaborating collaborative business processes from the information gathered (by using a collaborative situation framework, an organisational model, an informational model, a functional model and a metamodel and by using model transformation rules).

An investigation into social information processing in young people with Asperger syndrome.

PubMed

Flood, Andrea Mary; Julian Hare, Dougal; Wallis, Paul

2011-09-01

Deficits in social functioning are a core feature of autistic spectrum disorders (ASD), being linked to various cognitive and developmental factors, but there has been little attempt to draw on normative models of social cognition to understand social behaviour in ASD. The current study explored the utility of Crick and Dodge's (1994) information processing model to studying social cognition in ASD, and examined associations between social information processing patterns, theory of mind skills and social functioning. A matched-group design compared young people with Asperger syndrome with typically developing peers, using a social information processing interview previously designed for this purpose. The Asperger syndrome group showed significantly different patterns of information processing at the intent attribution, response generation and response evaluation stages of the information processing model. Theory of mind skills were found to be significantly associated with parental ratings of peer problems in the Asperger syndrome group but not with parental ratings of pro-social behaviour, with only limited evidence of an association between social information processing and measures of theory of mind and social functioning. Overall, the study supports the use of normative social information processing approaches to understanding social functioning in ASD.

Design Studio.

ERIC Educational Resources Information Center

Draze, Dianne; Palouda, Annelise

This book presents information about 10 areas of design, with the main emphasis on graphic design. One section presents the creative problem solving process and provides practice in using this process to solve design problems. Students are given a glimpse of other areas of design, including fashion, industrial, architectural, decorative,…

User-driven product data manager system design

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-03-01

With the infusion of information technologies into product development and production processes, effective management of product data is becoming essential to modern production enterprises. When an enterprise-wide Product Data Manager (PDM) is implemented, PDM designers must satisfy the requirements of individual users with different job functions and requirements, as well as the requirements of the enterprise as a whole. Concern must also be shown for the interrelationships between information, methods for retrieving archival information and integration of the PDM into the product development process. This paper describes a user-driven approach applied to PDM design for an agile manufacturing pilot projectmore » at Sandia National Laboratories that has been successful in achieving a much faster design-to-production process for a precision electro mechanical surety device.« less

Spatial information is processed even when it is task-irrelevant: implications for neuroimaging task design.

PubMed

Meegan, Daniel V; Honsberger, Michael J M

2005-05-01

Many neuroimaging studies have been designed to differentiate domain-specific processes in the brain. A common design constraint is to use identical stimuli for different domain-specific tasks. For example, an experiment investigating spatial versus identity processing would present compound spatial-identity stimuli in both spatial and identity tasks, and participants would be instructed to attend to, encode, maintain, or retrieve spatial information in the spatial task, and identity information in the identity task. An assumption in such studies is that spatial information will not be processed in the identity task, as it is irrelevant for that task. We report three experiments demonstrating violations of this assumption. Our results suggest that comparisons of spatial and identity tasks in existing neuroimaging studies have underestimated the amount of brain activation that is spatial-specific. For future neuroimaging studies, we recommend unique stimulus displays for each domain-specific task, and event-related measurement of post-stimulus processing.

Initial Design of Culturally Informed Behavioral Intervention Technologies: Developing an mHealth Intervention for Young Sexual Minority Men With Generalized Anxiety Disorder and Major Depression

PubMed Central

Montague, Enid; Mohr, David C

2013-01-01

Background To our knowledge, there is no well-articulated process for the design of culturally informed behavioral intervention technologies. Objective This paper describes the early stages of such a process, illustrated by the methodology for the ongoing development of a behavioral intervention technology targeting generalized anxiety disorder and major depression among young sexual minority men. Methods We integrated instructional design for Internet behavioral intervention technologies with greater detail on information sources that can identify user needs in understudied populations, as well as advances in the understanding of technology-specific behavioral intervention technology dimensions that may need to be culturally tailored. Results General psychological theory describing how to effect change in the clinical target is first integrated with theory describing potentially malleable factors that help explain the clinical problem within the population. Additional information sources are then used to (1) evaluate the theory, (2) identify population-specific factors that may affect users’ ability to relate to and benefit from the behavioral intervention technology, and (3) establish specific skills, attitudes, knowledge, etc, required to change malleable factors posited in the theory. User needs result from synthesis of this information. Product requirements are then generated through application of the user needs to specific behavioral intervention technology dimensions (eg, technology platform). We provide examples of considerations relevant to each stage of this process and how they were applied. Conclusions This process can guide the initial design of other culturally informed behavioral intervention technologies. This first attempt to create a systematic design process can spur development of guidelines for design of behavioral intervention technologies aimed to reduce health disparities. PMID:24311444

Design of a Model-Based Online Management Information System for Interlibrary Loan Networks.

ERIC Educational Resources Information Center

Rouse, Sandra H.; Rouse, William B.

1979-01-01

Discusses the design of a model-based management information system in terms of mathematical/statistical, information processing, and human factors issues and presents a prototype system for interlibrary loan networks. (Author/CWM)

Coordination and organization of security software process for power information application environment

NASA Astrophysics Data System (ADS)

Wang, Qiang

2017-09-01

As an important part of software engineering, the software process decides the success or failure of software product. The design and development feature of security software process is discussed, so is the necessity and the present significance of using such process. Coordinating the function software, the process for security software and its testing are deeply discussed. The process includes requirement analysis, design, coding, debug and testing, submission and maintenance. In each process, the paper proposed the subprocesses to support software security. As an example, the paper introduces the above process into the power information platform.

PMIS Project. Planning & Management Information System. A Project To Develop a Data Processing System for Support of the Planning and Management Needs of Local School Districts. Final Report, Year 2.

ERIC Educational Resources Information Center

Council of the Great City Schools, Washington, DC.

This document examines the design and structure of PMIS (Planning and Management Information System), an information system that supports the decisionmaking process of executive management in local school districts. The system is designed around a comprehensive, longitudinal, and interrelated data base. It utilizes a powerful real-time,…

Parametric Design within an Atomic Design Process (ADP) applied to Spacecraft Design

NASA Astrophysics Data System (ADS)

Ramos Alarcon, Rafael

This thesis describes research investigating the development of a model for the initial design of complex systems, with application to spacecraft design. The design model is called an atomic design process (ADP) and contains four fundamental stages (specifications, configurations, trade studies and drivers) that constitute the minimum steps of an iterative process that helps designers find a feasible solution. Representative design models from the aerospace industry are reviewed and are compared with the proposed model. The design model's relevance, adaptability and scalability features are evaluated through a focused design task exercise with two undergraduate teams and a long-term design exercise performed by a spacecraft payload team. The implementation of the design model is explained in the context in which the model has been researched. This context includes the organization (a student-run research laboratory at the University of Michigan), its culture (academically oriented), members that have used the design model and the description of the information technology elements meant to provide support while using the model. This support includes a custom-built information management system that consolidates relevant information that is currently being used in the organization. The information is divided in three domains: personnel development history, technical knowledge base and laboratory operations. The focused study with teams making use of the design model to complete an engineering design exercise consists of the conceptual design of an autonomous system, including a carrier and a deployable lander that form the payload of a rocket with an altitude range of over 1000 meters. Detailed results from each of the stages of the design process while implementing the model are presented, and an increase in awareness of good design practices in the teams while using the model are explained. A long-term investigation using the design model consisting of the successful characterization of an imaging system for a spacecraft is presented. The spacecraft is designed to take digital color images from low Earth orbit. The dominant drivers from each stage of the design process are indicated as they were identified, with the accompanying hardware development leading to the final configuration that comprises the flight spacecraft.

An object-oriented software approach for a distributed human tracking motion system

NASA Astrophysics Data System (ADS)

Micucci, Daniela L.

2003-06-01

Tracking is a composite job involving the co-operation of autonomous activities which exploit a complex information model and rely on a distributed architecture. Both information and activities must be classified and related in several dimensions: abstraction levels (what is modelled and how information is processed); topology (where the modelled entities are); time (when entities exist); strategy (why something happens); responsibilities (who is in charge of processing the information). A proper Object-Oriented analysis and design approach leads to a modular architecture where information about conceptual entities is modelled at each abstraction level via classes and intra-level associations, whereas inter-level associations between classes model the abstraction process. Both information and computation are partitioned according to level-specific topological models. They are also placed in a temporal framework modelled by suitable abstractions. Domain-specific strategies control the execution of the computations. Computational components perform both intra-level processing and intra-level information conversion. The paper overviews the phases of the analysis and design process, presents major concepts at each abstraction level, and shows how the resulting design turns into a modular, flexible and adaptive architecture. Finally, the paper sketches how the conceptual architecture can be deployed into a concrete distribute architecture by relying on an experimental framework.

Learning on the Fly: Exploring the Informal Learning Process of Aviation Instructors

ERIC Educational Resources Information Center

Wofford, Michael Grant; Ellinger, Andrea D.; Watkins, Karen E.

2013-01-01

Purpose: This study aims to examine the process of informal learning of aviation instructors. Design/methodology/approach: A qualitative instrumental case study design was used for this study. In-depth, multiple semi-structured interviews and document review were the primary approaches to data collection and the data were analyzed using constant…

Advanced Information Processing System - Fault detection and error handling

NASA Technical Reports Server (NTRS)

Lala, J. H.

1985-01-01

The Advanced Information Processing System (AIPS) is designed to provide a fault tolerant and damage tolerant data processing architecture for a broad range of aerospace vehicles, including tactical and transport aircraft, and manned and autonomous spacecraft. A proof-of-concept (POC) system is now in the detailed design and fabrication phase. This paper gives an overview of a preliminary fault detection and error handling philosophy in AIPS.

Informal information for web-based engineering catalogues

NASA Astrophysics Data System (ADS)

Allen, Richard D.; Culley, Stephen J.; Hicks, Ben J.

2001-10-01

Success is highly dependent on the ability of a company to efficiently produce optimal designs. In order to achieve this companies must minimize time to market and possess the ability to make fully informed decisions at the early phase of the design process. Such decisions may include the choice of component and suppliers, as well as cost and maintenance considerations. Computer modeling and electronic catalogues are becoming the preferred medium for the selection and design of mechanical components. In utilizing these techniques, the designer demands the capability to identify, evaluate and select mechanical components both quantitatively and qualitatively. Quantitative decisions generally encompass performance data included in the formal catalogue representation. It is in the area of qualitative decisions that the use of what the authors call 'Informal Information' is of crucial importance. Thus, 'Informal Information' must often be incorporated into the selection process and selection systems. This would enable more informed decisions to be made quicker, without the need for information retrieval via discussion with colleagues in the design environment. This paper provides an overview of the use of electronic information in the design of mechanical systems, including a discussion of limitations of current technology. The importance of Informal Information is discussed and the requirements for association with web based electronic catalogues are developed. This system is based on a flexible XML schema and enables the storage, classification and recall of Informal Information packets. Furthermore, a strategy for the inclusion of Informal Information is proposed, and an example case is used to illustrate the benefits.

Designing visual displays and system models for safe reactor operations based on the user`s perspective of the system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown-VanHoozer, S.A.

Most designers are not schooled in the area of human-interaction psychology and therefore tend to rely on the traditional ergonomic aspects of human factors when designing complex human-interactive workstations related to reactor operations. They do not take into account the differences in user information processing behavior and how these behaviors may affect individual and team performance when accessing visual displays or utilizing system models in process and control room areas. Unfortunately, by ignoring the importance of the integration of the user interface at the information process level, the result can be sub-optimization and inherently error- and failure-prone systems. Therefore, tomore » minimize or eliminate failures in human-interactive systems, it is essential that the designers understand how each user`s processing characteristics affects how the user gathers information, and how the user communicates the information to the designer and other users. A different type of approach in achieving this understanding is Neuro Linguistic Programming (NLP). The material presented in this paper is based on two studies involving the design of visual displays, NLP, and the user`s perspective model of a reactor system. The studies involve the methodology known as NLP, and its use in expanding design choices from the user`s ``model of the world,`` in the areas of virtual reality, workstation design, team structure, decision and learning style patterns, safety operations, pattern recognition, and much, much more.« less

42 CFR 433.112 - FFP for design, development, installation or enhancement of mechanized claims processing and...

Code of Federal Regulations, 2014 CFR

2014-10-01

... enhancement of mechanized claims processing and information retrieval systems. 433.112 Section 433.112 Public... processing and information retrieval systems. (a) Subject to paragraph (c) of this section, FFP is available... enhancement of a mechanized claims processing and information retrieval system only if the APD is approved by...

42 CFR 433.112 - FFP for design, development, installation or enhancement of mechanized claims processing and...

Code of Federal Regulations, 2012 CFR

2012-10-01

... enhancement of mechanized claims processing and information retrieval systems. 433.112 Section 433.112 Public... processing and information retrieval systems. (a) Subject to paragraph (c) of this section, FFP is available... enhancement of a mechanized claims processing and information retrieval system only if the APD is approved by...

42 CFR 433.112 - FFP for design, development, installation or enhancement of mechanized claims processing and...

Code of Federal Regulations, 2011 CFR

2011-10-01

... enhancement of mechanized claims processing and information retrieval systems. 433.112 Section 433.112 Public... processing and information retrieval systems. (a) Subject to paragraph (c) of this section, FFP is available... enhancement of a mechanized claims processing and information retrieval system only if the APD is approved by...

42 CFR 433.112 - FFP for design, development, installation or enhancement of mechanized claims processing and...

Code of Federal Regulations, 2013 CFR

2013-10-01

... enhancement of mechanized claims processing and information retrieval systems. 433.112 Section 433.112 Public... processing and information retrieval systems. (a) Subject to paragraph (c) of this section, FFP is available... enhancement of a mechanized claims processing and information retrieval system only if the APD is approved by...

Impact of Hospital Information Systems on Emergency Patient Processing

PubMed Central

Rusnak, James E.

1981-01-01

The Emergency Department offers the Hospital Information System's designer some unique problems to solve in the operational areas of patient registration, order entry, charge recording, and treatment processing. In a number of instances, Hospital Information Systems implementers have encountered serious difficulties in trying to design system components to support the requirements of the Emergency Services Department's operations. Washington Hospital has developed a very effective system for Emergency Services. The system's features are designed to meet the special requirements of the department and to maximize the use of the data captured by the Hospital Information System. The system supports accurate and timely charging for services. The treatment of the patient has been dramatically improved through the use of a computerized order processing and control. The installed systems resulted in a higher quality of care and cost effective operations.

Affect and Persuasion: Effects on Motivation for Information Processing.

ERIC Educational Resources Information Center

Leach, Mark M; Stoltenberg, Cal D.

The relationship between mood and information processing, particularly when reviewing the Elaboration Likelihood Model of persuasion, lacks conclusive evidence. This study was designed to investigate the hypothesis that information processing would be greater for mood-topic congruence than non mood-topic congruence. Undergraduate students (N=216)…

How do design features influence consumer attention when looking for nutritional information on food labels? Results from an eye-tracking study on pan bread labels.

PubMed

Antúnez, Lucía; Vidal, Leticia; Sapolinski, Alejandra; Giménez, Ana; Maiche, Alejandro; Ares, Gastón

2013-08-01

The aim of this work was to evaluate consumer visual processing of food labels when evaluating the salt content of pan bread labels and to study the influence of label design and nutritional labelling format on consumer attention. A total of 16 pan bread labels, designed according to a full factorial design, were presented to 52 participants, who were asked to decide whether the sodium content of each label was medium or low, while their eye movements were recorded using an eye tracker. Results showed that most participants looked at nutrition labels and the traffic light system to conclude on the salt content of the labels. However, the average percentage of participants who looked at the actual sodium content was much lower. Nutrition information format affected participants' processing of nutrition information. Among other effects, the inclusion of the traffic light system increased participants' attention towards some kind of nutrition information and facilitated its processing, but not its understanding.

Development and Validation of the Social Information Processing Application: A Web-Based Measure of Social Information Processing Patterns in Elementary School-Age Boys

ERIC Educational Resources Information Center

Kupersmidt, Janis B.; Stelter, Rebecca; Dodge, Kenneth A.

2011-01-01

The purpose of this study was to evaluate the psychometric properties of an audio computer-assisted self-interviewing Web-based software application called the Social Information Processing Application (SIP-AP) that was designed to assess social information processing skills in boys in RD through 5th grades. This study included a racially and…

Quantifying the Information Habits of High School Students Engaged in Engineering Design

ERIC Educational Resources Information Center

Mentzer, Nathan; Fosmire, Michael J.

2015-01-01

This study measured the information gathering behaviors of high school students who had taken engineering design courses as they solved a design problem. The authors investigated what types of information students accessed, its quality, when it was accessed during the students' process, and if it impacted their thinking during the activity.…

Development of Integrated Programs for Aerospace-Vehicle Design (IPAD)

NASA Technical Reports Server (NTRS)

Anderson, O. L.; Calvery, A. L.; Davis, D. A.; Dickmann, L.; Folger, D. H.; Jochem, E. N.; Kitto, C. M.; Vonlimbach, G.

1977-01-01

Integrated Programs for Aerospace Vehicle Design (IPAD) system design requirements are given. The information is based on the IPAD User Requirements Document (D6-IPAD-70013-D) and the Integrated Information Processing Requirements Document (D6-IPAD-70012-D). General information about IPAD and a list of the system design requirements that are to be satisfied by the IPAD system are given. The system design requirements definition is to be considered as a baseline definition of the IPAD system design requirements.

The Architectural and Interior Design Planning Process.

ERIC Educational Resources Information Center

Cohen, Elaine

1994-01-01

Explains the planning process in designing effective library facilities and discusses library building requirements that result from electronic information technologies. Highlights include historical structures; Americans with Disabilities Act; resource allocation; electrical power; interior spaces; lighting; design development; the roles of…

Usability and Visual Communication for Southern California Tsunami Evacuation Information: The importance of information design in disaster risk management

NASA Astrophysics Data System (ADS)

Jaenichen, C.; Schandler, S.; Wells, M.; Danielsen, T.

2015-12-01

Evacuation behavior, including participation and response, is rarely an individual and isolated process and the outcomes are usually systemic. Ineffective evacuation information can easily attribute to delayed evacuation response. Delays increase demands on already extended emergency personal, increase the likelihood of traffic congestion, and can cause harm to self and property. From an information design perspective, addressing issues in cognitive recall and emergency psychology, this case study examines evacuation messaging including written, audio, and visual presentation of information, and describes the application of design principles and role of visual communication for Southern California tsunami evacuation outreach. The niche of this project is the inclusion of cognitive processing as the driving influence when making formal design decisions and measurable data from a 4-year cognitive recall study to support the solution. Image included shows a tsunami evacaution map before and after the redesign.

Information Integration for Concurrent Engineering (IICE) IDEF3 Process Description Capture Method Report

DTIC Science & Technology

1995-09-01

vital processes of a business. process, IDEF, method, methodology, modeling, knowledge acquisition, requirements definition, information systems... knowledge resources. Like manpower, materials, and machines, information and knowledge assets are recognized as vital resources that can be leveraged to...integrated enterprise. These technologies are designed to leverage information and knowledge resources as the key enablers for high quality systems

Recommended System Design for the Occupational Health Management Information System (OHMIS). Volume 1.

DTIC Science & Technology

1983-04-01

Management Information System (OHMIS). The system design includes: detailed function data flows for each of the core data processing functions of OHMIS, in the form of input/processing/output algorithms; detailed descriptions of the inputs and outputs; performance specifications of OHMIS; resources required to develop and operate OHMIS (Vol II). In addition, the report provides a summary of the rationale used to develop the recommended system design, a description of the methodology used to develop the recommended system design, and a review of existing

Development of system design information for carbon dioxide using an amine type sorber

NASA Technical Reports Server (NTRS)

Rankin, R. L.; Roehlich, F.; Vancheri, F.

1971-01-01

Development work on system design information for amine type carbon dioxide sorber is reported. Amberlite IR-45, an aminated styrene divinyl benzene matrix, was investigated to determine the influence of design parameters of sorber particle size, process flow rate, CO2 partial pressure, total pressure, and bed designs. CO2 capacity and energy requirements for a 4-man size system were related mathematically to important operational parameters. Some fundamental studies in CO2 sorber capacity, energy requirements, and process operation were also performed.

Instructional Design and Directed Cognitive Processing.

ERIC Educational Resources Information Center

Bovy, Ruth Colvin

This paper argues that the information processing model provides a promising basis on which to build a comprehensive theory of instruction. Characteristics of the major information processing constructs are outlined including attention, encoding and rehearsal, working memory, long term memory, retrieval, and metacognitive processes, and a unifying…

Virtual HRD and National Culture: An Information Processing Perspective

ERIC Educational Resources Information Center

Chung, Chih-Hung; Angnakoon, Putthachat; Li, Jessica; Allen, Jeff

2016-01-01

Purpose: The purpose of this study is to provide researchers with a better understanding of the cultural impact on information processing in virtual learning environment. Design/methodology/approach: This study uses a causal loop diagram to depict the cultural impact on information processing in the virtual human resource development (VHRD)…

Strategic survey framework for the Northwest Forest Plan survey and manage program.

Treesearch

Randy Molina; Dan McKenzie; Robin Lesher; Jan Ford; Jim Alegria; Richard Cutler

2003-01-01

This document outlines an iterative process for assessing the information needs for all Northwest Forest Plan (NWFP) survey and manage species, designing and implementing strategic surveys (including field surveys and other information-gathering processes), and analyzing that information for use in the NWFP annual species review and adaptive-management processes. The...

Using Learning Analytics to Characterize Student Experimentation Strategies in Engineering Design

ERIC Educational Resources Information Center

Vieira, Camilo; Goldstein, Molly Hathaway; Purzer, Senay; Magana, Alejandra J.

2016-01-01

Engineering design is a complex process both for students to participate in and for instructors to assess. Informed designers use the key strategy of conducting experiments as they test ideas to inform next steps. Conversely, beginning designers experiment less, often with confounding variables. These behaviours are not easy to assess in…

Information processing systems, reasoning modules, and reasoning system design methods

DOEpatents

Hohimer, Ryan E.; Greitzer, Frank L.; Hampton, Shawn D.

2016-08-23

Information processing systems, reasoning modules, and reasoning system design methods are described. According to one aspect, an information processing system includes working memory comprising a semantic graph which comprises a plurality of abstractions, wherein the abstractions individually include an individual which is defined according to an ontology and a reasoning system comprising a plurality of reasoning modules which are configured to process different abstractions of the semantic graph, wherein a first of the reasoning modules is configured to process a plurality of abstractions which include individuals of a first classification type of the ontology and a second of the reasoning modules is configured to process a plurality of abstractions which include individuals of a second classification type of the ontology, wherein the first and second classification types are different.

Information processing systems, reasoning modules, and reasoning system design methods

DOEpatents

Hohimer, Ryan E.; Greitzer, Frank L.; Hampton, Shawn D.

2015-08-18

Information processing systems, reasoning modules, and reasoning system design methods are described. According to one aspect, an information processing system includes working memory comprising a semantic graph which comprises a plurality of abstractions, wherein the abstractions individually include an individual which is defined according to an ontology and a reasoning system comprising a plurality of reasoning modules which are configured to process different abstractions of the semantic graph, wherein a first of the reasoning modules is configured to process a plurality of abstractions which include individuals of a first classification type of the ontology and a second of the reasoning modules is configured to process a plurality of abstractions which include individuals of a second classification type of the ontology, wherein the first and second classification types are different.

Information processing systems, reasoning modules, and reasoning system design methods

DOEpatents

Hohimer, Ryan E; Greitzer, Frank L; Hampton, Shawn D

2014-03-04

Information processing systems, reasoning modules, and reasoning system design methods are described. According to one aspect, an information processing system includes working memory comprising a semantic graph which comprises a plurality of abstractions, wherein the abstractions individually include an individual which is defined according to an ontology and a reasoning system comprising a plurality of reasoning modules which are configured to process different abstractions of the semantic graph, wherein a first of the reasoning modules is configured to process a plurality of abstractions which include individuals of a first classification type of the ontology and a second of the reasoning modules is configured to process a plurality of abstractions which include individuals of a second classification type of the ontology, wherein the first and second classification types are different.

42 CFR 433.15 - Rates of FFP for administration.

Code of Federal Regulations, 2013 CFR

2013-10-01

...).) (3) Design, development, or installation of mechanized claims processing and information retrieval...) Operation of mechanized claims processing and information retrieval systems: 75 percent. (Section 1903(a) (3...

42 CFR 433.15 - Rates of FFP for administration.

Code of Federal Regulations, 2010 CFR

2010-10-01

...).) (3) Design, development, or installation of mechanized claims processing and information retrieval...) Operation of mechanized claims processing and information retrieval systems: 75 percent. (Section 1903(a) (3...

42 CFR 433.15 - Rates of FFP for administration.

Code of Federal Regulations, 2012 CFR

2012-10-01

...).) (3) Design, development, or installation of mechanized claims processing and information retrieval...) Operation of mechanized claims processing and information retrieval systems: 75 percent. (Section 1903(a) (3...

42 CFR 433.15 - Rates of FFP for administration.

Code of Federal Regulations, 2014 CFR

2014-10-01

...).) (3) Design, development, or installation of mechanized claims processing and information retrieval...) Operation of mechanized claims processing and information retrieval systems: 75 percent. (Section 1903(a) (3...

42 CFR 433.15 - Rates of FFP for administration.

Code of Federal Regulations, 2011 CFR

2011-10-01

...).) (3) Design, development, or installation of mechanized claims processing and information retrieval...) Operation of mechanized claims processing and information retrieval systems: 75 percent. (Section 1903(a) (3...

Defining and Building an Enriched Learning and Information Environment.

ERIC Educational Resources Information Center

Goodrum, David A.; And Others

1993-01-01

Discusses the development of an Enriched Learning and Information Environment (ELIE). Highlights include technology-based and theory-based frameworks for defining ELIEs; a socio-technical definition; a conceptual prototype; a participatory design process, including iterative design through rapid prototyping; and design issues for technology…

7 CFR 277.18 - Establishment of an Automated Data Processing (ADP) and Information Retrieval System.

Code of Federal Regulations, 2012 CFR

2012-01-01

...) and Information Retrieval System. 277.18 Section 277.18 Agriculture Regulations of the Department of... Data Processing (ADP) and Information Retrieval System. (a) Scope and application. This section... costs of planning, design, development or installation of ADP and information retrieval systems if the...

7 CFR 277.18 - Establishment of an Automated Data Processing (ADP) and Information Retrieval System.

Code of Federal Regulations, 2014 CFR

2014-01-01

...) and Information Retrieval System. 277.18 Section 277.18 Agriculture Regulations of the Department of... Data Processing (ADP) and Information Retrieval System. (a) Scope and application. This section... costs of planning, design, development or installation of ADP and information retrieval systems if the...

7 CFR 277.18 - Establishment of an Automated Data Processing (ADP) and Information Retrieval System.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) and Information Retrieval System. 277.18 Section 277.18 Agriculture Regulations of the Department of... Data Processing (ADP) and Information Retrieval System. (a) Scope and application. This section... costs of planning, design, development or installation of ADP and information retrieval systems if the...

7 CFR 277.18 - Establishment of an Automated Data Processing (ADP) and Information Retrieval System.

Code of Federal Regulations, 2013 CFR

2013-01-01

...) and Information Retrieval System. 277.18 Section 277.18 Agriculture Regulations of the Department of... Data Processing (ADP) and Information Retrieval System. (a) Scope and application. This section... costs of planning, design, development or installation of ADP and information retrieval systems if the...

Supporting virtual enterprise design by a web-based information model

NASA Astrophysics Data System (ADS)

Li, Dong; Barn, Balbir; McKay, Alison; de Pennington, Alan

2001-10-01

Development of IT and its applications have led to significant changes in business processes. To pursue agility, flexibility and best service to customers, enterprises focus on their core competence and dynamically build relationships with partners to form virtual enterprises as customer driven temporary demand chains/networks. Building the networked enterprise needs responsively interactive decisions instead of a single-direction partner selection process. Benefits and risks in the combination should be systematically analysed, and aggregated information about value-adding abilities and risks of networks needs to be derived from interactions of all partners. In this research, a hierarchical information model to assess partnerships for designing virtual enterprises was developed. Internet technique has been applied to the evaluation process so that interactive decisions can be visualised and made responsively during the design process. The assessment is based on the process which allows each partner responds to requirements of the virtual enterprise by planning its operational process as a bidder. The assessment is then produced by making an aggregated value to represent prospect of the combination of partners given current bidding. Final design is a combination of partners with the greatest total value-adding capability and lowest risk.

Process Mining-Based Method of Designing and Optimizing the Layouts of Emergency Departments in Hospitals.

PubMed

Rismanchian, Farhood; Lee, Young Hoon

2017-07-01

This article proposes an approach to help designers analyze complex care processes and identify the optimal layout of an emergency department (ED) considering several objectives simultaneously. These objectives include minimizing the distances traveled by patients, maximizing design preferences, and minimizing the relocation costs. Rising demand for healthcare services leads to increasing demand for new hospital buildings as well as renovating existing ones. Operations management techniques have been successfully applied in both manufacturing and service industries to design more efficient layouts. However, high complexity of healthcare processes makes it challenging to apply these techniques in healthcare environments. Process mining techniques were applied to address the problem of complexity and to enhance healthcare process analysis. Process-related information, such as information about the clinical pathways, was extracted from the information system of an ED. A goal programming approach was then employed to find a single layout that would simultaneously satisfy several objectives. The layout identified using the proposed method improved the distances traveled by noncritical and critical patients by 42.2% and 47.6%, respectively, and minimized the relocation costs. This study has shown that an efficient placement of the clinical units yields remarkable improvements in the distances traveled by patients.

75 FR 17428 - Notice of Proposed New Information Collection for Focus Groups for Non-use Valuation Survey...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-06

... a nonuse valuation survey of the U.S. public. A key aspect of the survey design process is to use... use the results of these information collection activities to optimize the design of the survey... information to address several key questions relating to the survey and, in particular, the conjoint design...

End users transforming experiences into formal information and process models for personalised health interventions.

PubMed

Lindgren, Helena; Lundin-Olsson, Lillemor; Pohl, Petra; Sandlund, Marlene

2014-01-01

Five physiotherapists organised a user-centric design process of a knowledge-based support system for promoting exercise and preventing falls. The process integrated focus group studies with 17 older adults and prototyping. The transformation of informal medical and rehabilitation expertise and older adults' experiences into formal information and process models during the development was studied. As tool they used ACKTUS, a development platform for knowledge-based applications. The process became agile and incremental, partly due to the diversity of expectations and preferences among both older adults and physiotherapists, and the participatory approach to design and development. In addition, there was a need to develop the knowledge content alongside with the formal models and their presentations, which allowed the participants to test hands-on and evaluate the ideas, content and design. The resulting application is modular, extendable, flexible and adaptable to the individual end user. Moreover, the physiotherapists are able to modify the information and process models, and in this way further develop the application. The main constraint was found to be the lack of support for the initial phase of concept modelling, which lead to a redesigned user interface and functionality of ACKTUS.

HMI conventions for process control graphics.

PubMed

Pikaar, Ruud N

2012-01-01

Process operators supervise and control complex processes. To enable the operator to do an adequate job, instrumentation and process control engineers need to address several related topics, such as console design, information design, navigation, and alarm management. In process control upgrade projects, usually a 1:1 conversion of existing graphics is proposed. This paper suggests another approach, efficiently leading to a reduced number of new powerful process graphics, supported by a permanent process overview displays. In addition a road map for structuring content (process information) and conventions for the presentation of objects, symbols, and so on, has been developed. The impact of the human factors engineering approach on process control upgrade projects is illustrated by several cases.

The UARS and open data system concept and analysis study. Executive summary

NASA Technical Reports Server (NTRS)

Mittal, M.; Nebb, J.; Woodward, H.

1983-01-01

Alternative concepts for a common design for the UARS and OPEN Central Data Handling Facility (CDHF) are offered. The designs are consistent with requirements shared by UARS and OPEN and the data storage and data processing demands of these missions. Because more detailed information is available for UARS, the design approach was to size the system and to select components for a UARS CDHF, but in a manner that does not optimize the CDHF at the expense of OPEN. Costs for alternative implementations of the UARS designs are presented showing that the system design does not restrict the implementation to a single manufacturer. Processing demands on the alternative UARS CDHF implementations are discussed. With this information at hand together with estimates for OPEN processing demands, it is shown that any shortfall in system capability for OPEN support can be remedied by either component upgrades or array processing attachments rather than a system redesign.

Building Information Modeling (BIM) Primer. Report 1: Facility Life-Cycle Process and Technology Innovation

DTIC Science & Technology

2012-08-01

Building Information Modeling ( BIM ) Primer Report 1: Facility Life-cycle Process and Technology Innovation In fo...is unlimited. ERDC/ITL TR-12-2 August 2012 Building Information Modeling ( BIM ) Primer Report 1: Facility Life-cycle Process and Technology...and to enhance the quality of projects through the design, construction, and handover phases. Building Information Modeling ( BIM ) is a

"Are You Talking to Me?"--Teaching User-Centered Design

ERIC Educational Resources Information Center

Kemnitzer, Ronald B.

2005-01-01

User-centered design (UCD) is an approach to design that grounds the process in information about the people who will use the product. UCD processes focus on users through the planning, design and development of a product. Establishing a User Profile is certainly a key element in user-centered design. For many products, such as an automobile, a…

Sandia Advanced MEMS Design Tools v. 3.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yarberry, Victor R.; Allen, James J.; Lantz, Jeffrey W.

This is a major revision to the Sandia Advanced MEMS Design Tools. It replaces all previous versions. New features in this version: Revised to support AutoCAD 2014 and 2015 This CD contains an integrated set of electronic files that: a) Describe the SUMMiT V fabrication process b) Provide enabling educational information (including pictures, videos, technical information) c) Facilitate the process of designing MEMS with the SUMMiT process (prototype file, Design Rule Checker, Standard Parts Library) d) Facilitate the process of having MEMS fabricated at Sandia National Laboratories e) Facilitate the process of having post-fabrication services performed. While there exists somemore » files on the CD that are used in conjunction with software package AutoCAD, these files are not intended for use independent of the CD. Note that the customer must purchase his/her own copy of AutoCAD to use with these files.« less

78 FR 57587 - Environmental Impact and Related Procedures-Programmatic Agreements and Additional Categorical...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-19

... administrative and NEPA processing by encouraging grant applicants to design proposed projects so that... geotechnical and other investigations to provide information for preliminary design and for environmental... information for preliminary design and for environmental analyses and permitting purposes and is found...

Development of Integrated Programs for Aerospace-vehicle design (IPAD): Integrated information processing requirements

NASA Technical Reports Server (NTRS)

Southall, J. W.

1979-01-01

The engineering-specified requirements for integrated information processing by means of the Integrated Programs for Aerospace-Vehicle Design (IPAD) system are presented. A data model is described and is based on the design process of a typical aerospace vehicle. General data management requirements are specified for data storage, retrieval, generation, communication, and maintenance. Information management requirements are specified for a two-component data model. In the general portion, data sets are managed as entities, and in the specific portion, data elements and the relationships between elements are managed by the system, allowing user access to individual elements for the purpose of query. Computer program management requirements are specified for support of a computer program library, control of computer programs, and installation of computer programs into IPAD.

The application of use case modeling in designing medical imaging information systems.

PubMed

Safdari, Reza; Farzi, Jebraeil; Ghazisaeidi, Marjan; Mirzaee, Mahboobeh; Goodini, Azadeh

2013-01-01

Introduction. The essay at hand is aimed at examining the application of use case modeling in analyzing and designing information systems to support Medical Imaging services. Methods. The application of use case modeling in analyzing and designing health information systems was examined using electronic databases (Pubmed, Google scholar) resources and the characteristics of the modeling system and its effect on the development and design of the health information systems were analyzed. Results. Analyzing the subject indicated that Provident modeling of health information systems should provide for quick access to many health data resources in a way that patients' data can be used in order to expand distant services and comprehensive Medical Imaging advices. Also these experiences show that progress in the infrastructure development stages through gradual and repeated evolution process of user requirements is stronger and this can lead to a decline in the cycle of requirements engineering process in the design of Medical Imaging information systems. Conclusion. Use case modeling approach can be effective in directing the problems of health and Medical Imaging information systems towards understanding, focusing on the start and analysis, better planning, repetition, and control.

Measuring the Process and Quality of Informed Consent for Clinical Research: Development and Testing

PubMed Central

Cohn, Elizabeth Gross; Jia, Haomiao; Smith, Winifred Chapman; Erwin, Katherine; Larson, Elaine L.

2013-01-01

Purpose/Objectives To develop and assess the reliability and validity of an observational instrument, the Process and Quality of Informed Consent (P-QIC). Design A pilot study of the psychometrics of a tool designed to measure the quality and process of the informed consent encounter in clinical research. The study used professionally filmed, simulated consent encounters designed to vary in process and quality. Setting A major urban teaching hospital in the northeastern region of the United States. Sample 63 students enrolled in health-related programs participated in psychometric testing, 16 students participated in test-retest reliability, and 5 investigator-participant dyads were observed for the actual consent encounters. Methods For reliability and validity testing, students watched and rated videotaped simulations of four consent encounters intentionally varied in process and content and rated them with the proposed instrument. Test-retest reliability was established by raters watching the videotaped simulations twice. Inter-rater reliability was demonstrated by two simultaneous but independent raters observing an actual consent encounter. Main Research Variables The essential elements of information and communication for informed consent. Findings The initial testing of the P-QIC demonstrated reliable and valid psychometric properties in both the simulated standardized consent encounters and actual consent encounters in the hospital setting. Conclusions The P-QIC is an easy-to-use observational tool that provides a quick assessment of the areas of strength and areas that need improvement in a consent encounter. It can be used in the initial trainings of new investigators or consent administrators and in ongoing programs of improvement for informed consent. Implications for Nursing The development of a validated observational instrument will allow investigators to assess the consent process more accurately and evaluate strategies designed to improve it. PMID:21708532

User Testing of Consumer Medicine Information in Australia

ERIC Educational Resources Information Center

Jay, Eleanor; Aslani, Parisa; Raynor, D. K.

2011-01-01

Background: Consumer Medicine Information (CMI) forms an important basis for the dissemination of medicines information worldwide. Methods: This article presents an overview of the design and development of Australian CMI, and discusses "user-testing" as an iterative, formative process for CMI design. Findings: In Australia, legislation…

42 CFR 433.112 - FFP for design, development, installation or enhancement of mechanized claims processing and...

Code of Federal Regulations, 2010 CFR

2010-10-01

... enhancement of mechanized claims processing and information retrieval systems. 433.112 Section 433.112 Public... processing and information retrieval systems. (a) FFP is available at the 90 percent rate in State... information retrieval system only if the APD is approved by CMS prior to the State's expenditure of funds for...

Information Presentation

NASA Technical Reports Server (NTRS)

Holden, Kritina L.; Thompson, Shelby G.; Sandor, Aniko; McCann, Robert S.; Kaiser, Mary K.; Adelstein, Barnard D.; Begault, Durand R.; Beutter, Brent R.; Stone, Leland S.; Godfroy, Martine

2009-01-01

The goal of the Information Presentation Directed Research Project (DRP) is to address design questions related to the presentation of information to the crew. In addition to addressing display design issues associated with information formatting, style, layout, and interaction, the Information Presentation DRP is also working toward understanding the effects of extreme environments encountered in space travel on information processing. Work is also in progress to refine human factors-based design tools, such as human performance modeling, that will supplement traditional design techniques and help ensure that optimal information design is accomplished in the most cost-efficient manner. The major areas of work, or subtasks, within the Information Presentation DRP for FY10 are: 1) Displays, 2) Controls, 3) Procedures and Fault Management, and 4) Human Performance Modeling. The poster will highlight completed and planned work for each subtask.

Integrating Data Sources for Process Sustainability ...

EPA Pesticide Factsheets

To perform a chemical process sustainability assessment requires significant data about chemicals, process design specifications, and operating conditions. The required information includes the identity of the chemicals used, the quantities of the chemicals within the context of the sustainability assessment, physical properties of these chemicals, equipment inventory, as well as health, environmental, and safety properties of the chemicals. Much of this data are currently available to the process engineer either from the process design in the chemical process simulation software or online through chemical property and environmental, health, and safety databases. Examples of these databases include the U.S. Environmental Protection Agency’s (USEPA’s) Aggregated Computational Toxicology Resource (ACToR), National Institute for Occupational Safety and Health’s (NIOSH’s) Hazardous Substance Database (HSDB), and National Institute of Standards and Technology’s (NIST’s) Chemistry Webbook. This presentation will provide methods and procedures for extracting chemical identity and flow information from process design tools (such as chemical process simulators) and chemical property information from the online databases. The presentation will also demonstrate acquisition and compilation of the data for use in the EPA’s GREENSCOPE process sustainability analysis tool. This presentation discusses acquisition of data for use in rapid LCI development.

Integrated Design System (IDS) Tools for the Spacecraft Aeroassist/Entry Vehicle Design Process

NASA Technical Reports Server (NTRS)

Olynick, David; Braun, Robert; Langhoff, Steven R. (Technical Monitor)

1997-01-01

The definition of the Integrated Design System technology focus area as presented in the NASA Information Technology center of excellence strategic plan is described. The need for IDS tools in the aeroassist/entry vehicle design process is illustrated. Initial and future plans for spacecraft IDS tool development are discussed.

High School Students' Use of Paper-Based and Internet-Based Information Sources in the Engineering Design Process

ERIC Educational Resources Information Center

Pieper, Jon; Mentzer, Nathan

2013-01-01

Mentzer and Becker (2011) and Becker and Mentzer (2012) demonstrated that high school students engaged in engineering design problems spent more time accessing information and spent more time designing when provided with Internet access. They studied high school students engaged in an engineering design challenge. The two studies attempted to…

A Social Information Processing Approach to Job Attitudes and Task Design

ERIC Educational Resources Information Center

Salancik, Gerald R.; Pfeffer, Jeffrey

1978-01-01

In comparison with need-satisfaction and expectancy models of job attitudes and motivation, the social information processing perspective emphasizes the effects of context and the consequences of past choices, rather than individual predispositions and rational decision-making processes. (Author)

Science, education and industry information resources complementarity as a basis for design of knowledge management systems

NASA Astrophysics Data System (ADS)

Maksimov, N. V.; Tikhomirov, G. V.; Golitsyna, O. L.

2017-01-01

The main problems and circumstances that influence the processes of creating effective knowledge management systems were described. These problems particularly include high species diversity of instruments for knowledge representation, lack of adequate lingware, including formal representation of semantic relationships. For semantic data descriptions development a conceptual model of the subject area and a conceptual-lexical system should be designed on proposals of ISO-15926 standard. It is proposed to conduct an information integration of educational and production processes on the basis of information systems technologies. Integrated knowledge management system information environment combines both traditional information resources and specific information resources of subject domain including task context and implicit/tacit knowledge.

45 CFR 205.37 - Responsibilities of the Administration for Children and Families (ACF).

Code of Federal Regulations, 2013 CFR

2013-10-01

... Processing and Information Retrieval System Guide. The initial advance automatic data processing planning... description of the proposed statewide management system, including the description of information flows, input..., review, assess, and inspect the planning, design, and operation of, statewide management information...

45 CFR 205.37 - Responsibilities of the Administration for Children and Families (ACF).

Code of Federal Regulations, 2012 CFR

2012-10-01

... Application Processing and Information Retrieval System Guide. The initial advance automatic data processing... description of the proposed statewide management system, including the description of information flows, input..., review, assess, and inspect the planning, design, and operation of, statewide management information...

45 CFR 205.37 - Responsibilities of the Administration for Children and Families (ACF).

Code of Federal Regulations, 2011 CFR

2011-10-01

... Application Processing and Information Retrieval System Guide. The initial advance automatic data processing... description of the proposed statewide management system, including the description of information flows, input..., review, assess, and inspect the planning, design, and operation of, statewide management information...

Modeling interdependencies between business and communication processes in hospitals.

PubMed

Brigl, Birgit; Wendt, Thomas; Winter, Alfred

2003-01-01

The optimization and redesign of business processes in hospitals is an important challenge for the hospital information management who has to design and implement a suitable HIS architecture. Nevertheless, there are no tools available specializing in modeling information-driven business processes and the consequences on the communication between information processing, tools. Therefore, we will present an approach which facilitates the representation and analysis of business processes and resulting communication processes between application components and their interdependencies. This approach aims not only to visualize those processes, but to also to evaluate if there are weaknesses concerning the information processing infrastructure which hinder the smooth implementation of the business processes.

Conducting Nursing Research to Advance and Inform Health Policy.

PubMed

Ellenbecker, Carol Hall; Edward, Jean

2016-11-01

The primary roles of nurse scientists in conducting health policy research are to increase knowledge in the discipline and provide evidence for informing and advancing health policies with the goal of improving the health outcomes of society. Health policy research informs, characterizes, explains, or tests hypotheses by employing a variety of research designs. Health policy research focuses on improving the access to care, the quality and cost of care, and the efficiency with which care is delivered. In this article, we explain how nurses might envision their research in a policy process framework, describe research designs that nurse researchers might use to inform and advance health policies, and provide examples of research conducted by nurse researchers to explicate key concepts in the policy process framework. Health policies are well informed and advanced when nurse researchers have a good understanding of the political process. The policy process framework provides a context for improving the focus and design of research and better explicating the connection between research evidence and policy. Nurses should focus their research on addressing problems of importance that are on the healthcare agenda, work with interdisciplinary teams of researchers, synthesize, and widely disseminate results.

DESIGN INFORMATION ON FINE PORE AERATION SYSTEMS

EPA Science Inventory

Field studies were conducted over several years at municipal wastewater treatment plants employing line pore diffused aeration systems. These studies were designed to produce reliable information on the performance and operational requirements of fine pore devices under process ...

Generalized Bell states map physical systems’ quantum evolution into a grammar for quantum information processing

NASA Astrophysics Data System (ADS)

Delgado, Francisco

2017-12-01

Quantum information processing should be generated through control of quantum evolution for physical systems being used as resources, such as superconducting circuits, spinspin couplings in ions and artificial anyons in electronic gases. They have a quantum dynamics which should be translated into more natural languages for quantum information processing. On this terrain, this language should let to establish manipulation operations on the associated quantum information states as classical information processing does. This work shows how a kind of processing operations can be settled and implemented for quantum states design and quantum processing for systems fulfilling a SU(2) reduction in their dynamics.

Federated Process Framework in a Virtual Enterprise Using an Object-Oriented Database and Extensible Markup Language.

ERIC Educational Resources Information Center

Bae, Kyoung-Il; Kim, Jung-Hyun; Huh, Soon-Young

2003-01-01

Discusses process information sharing among participating organizations in a virtual enterprise and proposes a federated process framework and system architecture that provide a conceptual design for effective implementation of process information sharing supporting the autonomy and agility of the organizations. Develops the framework using an…

How does the context and design of participatory decision-making processes affect their outcomes? Evidence from sustainable land management in global drylands.

NASA Astrophysics Data System (ADS)

de Vente, Joris; Reed, Mark; Stringer, Lindsay; Valente, Sandra; Newig, Jens

2014-05-01

It is widely accepted that the design of participatory processes in environmental management needs to be adapted to local contexts. Yet, it is not clear which elements of process design are universal, making it difficult to design processes that deliver beneficial outcomes across different contexts. We used empirical evidence to analyse the extent to which context and process design can enable or impede stakeholder participation and facilitate beneficial environmental and social outcomes in a range of decision-making contexts where stakeholders are engaged in environmental management. To explore the role of national-scale context on the outcomes of participatory processes, we interviewed facilitators from a process that was replicated across 13 dryland study sites around the world, which focussed on selecting Sustainable Land Management (SLM) options in close collaboration with stakeholders. To explore the role of process design and local context, we interviewed participants and facilitators in 11 case studies in Spain and Portugal in which different process designs were used. Interview data were analysed using a combination of quantitative and qualitative approaches to characterise relationships between process design, context and process outcomes. The similarity of outcomes across the 13 international study sites suggested that the national socio-cultural context in which a participatory process is conducted has little impact on its outcomes. However, analysis of cases from Spain and Portugal showed that some aspects of local context may affect outcomes. Having said this, factors associated with process design and participant selection played a more significant role in influencing outcomes in both countries. Processes that led to more beneficial outcomes for the environment and/or participants were likely to include: the legitimate representation of stakeholders; professional facilitation including structured methods for eliciting and aggregating information and balancing power dynamics between participants; and the provision of information and decision-making power to all participants. Participatory processes initiated or facilitated by government bodies led to significantly less trust, information gain, learning, and flexible solutions. However, in these processes, decisions were more acceptable to and likely to be implemented by governments and by those who had to apply them on the ground. These findings provide a solid empirical basis for best practice in the design of participatory processes in SLM in a number of contexts internationally, which if followed, increase the likelihood of providing beneficial environmental and social outcomes for those involved.

Context Matters: The Value of Analyzing Human Factors within Educational Contexts as a Way of Informing Technology-Related Decisions within Design Research

ERIC Educational Resources Information Center

MacKinnon, Kim

2012-01-01

While design research can be useful for designing effective technology integrations within complex social settings, it currently fails to provide concrete methodological guidelines for gathering and organizing information about the research context, or for determining how such analyses ought to guide the iterative design and innovation process. A…

Design and implementation for integrated UAV multi-spectral inspection system

NASA Astrophysics Data System (ADS)

Zhu, X.; Li, X.; Yan, F.

2018-04-01

In order to improve the working efficiency of the transmission line inspection and reduce the labour intensity of the inspectors, this paper presents an Unmanned Aerial Vehicle (UAV) inspection system architecture for the transmission line inspection. In this document, the light-duty design for different inspection equipment and processing terminals is completed. It presents the reference design for the information-processing terminal, supporting the inspection and interactive equipment accessing, and obtains all performance indicators of the inspection information processing through the tests. Practical application shows that the UAV inspection system supports access and management of different types of mainstream fault detection equipment, and can implement the independent diagnosis of the detected information to generate inspection reports in line with industry norms, which can meet the fast, timely, and efficient requirements for the power line inspection work.

Hierarchical Thinking: A Cognitive Tool for Guiding Coherent Decision Making in Design Problem Solving

ERIC Educational Resources Information Center

Haupt, Grietjie

2018-01-01

This paper builds on two concepts, the first of which is the extended information processing model of expert design cognition. This proposes twelve internal psychological characteristics interacting with the external world of expert designers during the early phases of the design process. Here, I explore one of the characteristics, hierarchical…

Modeling workflow to design machine translation applications for public health practice

PubMed Central

Turner, Anne M.; Brownstein, Megumu K.; Cole, Kate; Karasz, Hilary; Kirchhoff, Katrin

2014-01-01

Objective Provide a detailed understanding of the information workflow processes related to translating health promotion materials for limited English proficiency individuals in order to inform the design of context-driven machine translation (MT) tools for public health (PH). Materials and Methods We applied a cognitive work analysis framework to investigate the translation information workflow processes of two large health departments in Washington State. Researchers conducted interviews, performed a task analysis, and validated results with PH professionals to model translation workflow and identify functional requirements for a translation system for PH. Results The study resulted in a detailed description of work related to translation of PH materials, an information workflow diagram, and a description of attitudes towards MT technology. We identified a number of themes that hold design implications for incorporating MT in PH translation practice. A PH translation tool prototype was designed based on these findings. Discussion This study underscores the importance of understanding the work context and information workflow for which systems will be designed. Based on themes and translation information workflow processes, we identified key design guidelines for incorporating MT into PH translation work. Primary amongst these is that MT should be followed by human review for translations to be of high quality and for the technology to be adopted into practice. Counclusion The time and costs of creating multilingual health promotion materials are barriers to translation. PH personnel were interested in MT's potential to improve access to low-cost translated PH materials, but expressed concerns about ensuring quality. We outline design considerations and a potential machine translation tool to best fit MT systems into PH practice. PMID:25445922

An investigative model evaluating how consumers process pictorial information on nonprescription medication labels.

PubMed

Sansgiry, S S; Cady, P S

1997-01-01

Currently, marketed over-the-counter (OTC) medication labels were simulated and tested in a controlled environment to understand consumer evaluation of OTC label information. Two factors, consumers' age (younger and older adults) and label designs (picture-only, verbal-only, congruent picture-verbal, and noncongruent picture-verbal) were controlled and tested to evaluate consumer information processing. The effects exerted by the independent variables, namely, comprehension of label information (understanding) and product evaluations (satisfaction, certainty, and perceived confusion) were evaluated on the dependent variable purchase intention. Intention measured as purchase recommendation was significantly related to product evaluations and affected by the factor label design. Participants' level of perceived confusion was more important than actual understanding of information on OTC medication labels. A Label Evaluation Process Model was developed which could be used for future testing of OTC medication labels.

Effect of warning placement on the information processing of college students reading an OTC drug facts panel.

PubMed

Bhansali, Archita H; Sangani, Darshan S; Mhatre, Shivani K; Sansgiry, Sujit S

2018-01-01

To compare three over-the-counter (OTC) Drug Facts panel versions for information processing optimization among college students. University of Houston students (N = 210) participated in a cross-sectional survey from January to May 2010. A current FDA label was compared to two experimental labels developed using the theory of CHREST to test information processing by re-positioning the warning information within the Drug Facts panel. Congruency was defined as placing like information together. Information processing was evaluated using the OTC medication Label Evaluation Process Model (LEPM): label comprehension, ease-of-use, attitude toward the product, product evaluation, and purchase intention. Experimental label with chunked congruent information (uses-directions-other information-warnings) was rated significantly higher than the current FDA label and had the best average scores among the LEPM information processing variables. If replications uphold these findings, the FDA label design might be revised to improve information processing.

Combining cognitive engineering and information fusion architectures to build effective joint systems

NASA Astrophysics Data System (ADS)

Sliva, Amy L.; Gorman, Joe; Voshell, Martin; Tittle, James; Bowman, Christopher

2016-05-01

The Dual Node Decision Wheels (DNDW) architecture concept was previously described as a novel approach toward integrating analytic and decision-making processes in joint human/automation systems in highly complex sociotechnical settings. In this paper, we extend the DNDW construct with a description of components in this framework, combining structures of the Dual Node Network (DNN) for Information Fusion and Resource Management with extensions on Rasmussen's Decision Ladder (DL) to provide guidance on constructing information systems that better serve decision-making support requirements. The DNN takes a component-centered approach to system design, decomposing each asset in terms of data inputs and outputs according to their roles and interactions in a fusion network. However, to ensure relevancy to and organizational fitment within command and control (C2) processes, principles from cognitive systems engineering emphasize that system design must take a human-centered systems view, integrating information needs and decision making requirements to drive the architecture design and capabilities of network assets. In the current work, we present an approach for structuring and assessing DNDW systems that uses a unique hybrid DNN top-down system design with a human-centered process design, combining DNN node decomposition with artifacts from cognitive analysis (i.e., system abstraction decomposition models, decision ladders) to provide work domain and task-level insights at different levels in an example intelligence, surveillance, and reconnaissance (ISR) system setting. This DNDW structure will ensure not only that the information fusion technologies and processes are structured effectively, but that the resulting information products will align with the requirements of human decision makers and be adaptable to different work settings .

Patent Information Use in Engineering Technology Design: An Analysis of Student Work

ERIC Educational Resources Information Center

Phillips, Margaret; Zwicky, Dave

2017-01-01

How might engineering technology students make use of patent information in the engineering design process? Librarians analyzed team project reports and personal reflections created by students in an undergraduate mechanical engineering technology design course, revealing that the students used patents to consider the patentability of their ideas,…

Natural Resource Information System. Volume 2: System operating procedures and instructions

NASA Technical Reports Server (NTRS)

1972-01-01

A total computer software system description is provided for the prototype Natural Resource Information System designed to store, process, and display data of maximum usefulness to land management decision making. Program modules are described, as are the computer file design, file updating methods, digitizing process, and paper tape conversion to magnetic tape. Operating instructions for the system, data output, printed output, and graphic output are also discussed.

42 CFR 432.50 - FFP: Staffing and training costs.

Code of Federal Regulations, 2014 CFR

2014-10-01

... directly in the operation of mechanized claims processing and information retrieval systems, the rate is 75... processing and information retrieval systems, the rate is 50 percent for training and 90 percent for all... information retrieval systems (paragraphs (b)(2) and (3) of this section) are applicable only if the design...

42 CFR 432.50 - FFP: Staffing and training costs.

Code of Federal Regulations, 2013 CFR

2013-10-01

... directly in the operation of mechanized claims processing and information retrieval systems, the rate is 75... processing and information retrieval systems, the rate is 50 percent for training and 90 percent for all... information retrieval systems (paragraphs (b)(2) and (3) of this section) are applicable only if the design...

42 CFR 432.50 - FFP: Staffing and training costs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... directly in the operation of mechanized claims processing and information retrieval systems, the rate is 75... processing and information retrieval systems, the rate is 50 percent for training and 90 percent for all... information retrieval systems (paragraphs (b)(2) and (3) of this section) are applicable only if the design...

42 CFR 432.50 - FFP: Staffing and training costs.

Code of Federal Regulations, 2011 CFR

2011-10-01

... directly in the operation of mechanized claims processing and information retrieval systems, the rate is 75... processing and information retrieval systems, the rate is 50 percent for training and 90 percent for all... information retrieval systems (paragraphs (b)(2) and (3) of this section) are applicable only if the design...

42 CFR 432.50 - FFP: Staffing and training costs.

Code of Federal Regulations, 2012 CFR

2012-10-01

... directly in the operation of mechanized claims processing and information retrieval systems, the rate is 75... processing and information retrieval systems, the rate is 50 percent for training and 90 percent for all... information retrieval systems (paragraphs (b)(2) and (3) of this section) are applicable only if the design...

Information Loss: Exploring the Information Systems Management's Neglect Affecting Softcopy Reproduction of Heritage-Data

ERIC Educational Resources Information Center

Oskooie, Kamran Rezai

2012-01-01

This exploratory mixed methods study quantified and explored leadership interest in legacy-data conversion and information processing. Questionnaires were administered electronically to 92 individuals in design, manufacturing, and other professions from the manufacturing, processing, Internet, computing, software and technology divisions. Research…

Improving Program Performance through Management Information. A Workbook.

ERIC Educational Resources Information Center

Bienia, Nancy

Designed specifically for state and local managers and supervisors who plan, direct, and operate child support enforcement programs, this workbook provides a four-part, step-by-step process for identifying needed information and methods of using the information to operate an effective program. The process consists of: (1) determining what…

Reshaping the Enterprise through an Information Architecture and Process Reengineering.

ERIC Educational Resources Information Center

Laudato, Nicholas C.; DeSantis, Dennis J.

1995-01-01

The approach used by the University of Pittsburgh (Pennsylvania) in designing a campus-wide information architecture and a framework for reengineering the business process included building consensus on a general philosophy for information systems, using pattern-based abstraction techniques, applying data modeling and application prototyping, and…

Automating the Air Force Retail-Level Equipment Management Process: An Application of Microcomputer-Based Information Systems Techniques

DTIC Science & Technology

1988-09-01

could use the assistance of a microcomputer-based management information system . However, adequate system design and development requires an in-depth...understanding of the Equipment Management Section and the environment in which it functions were asked and answered. Then, a management information system was...designed, developed, and tested. The management information system is called the Equipment Management Information System (EMIS).

Feasibility study of an Integrated Program for Aerospace vehicle Design (IPAD). Volume 1A: Summary

NASA Technical Reports Server (NTRS)

Miller, R. E., Jr.; Redhed, D. D.; Kawaguchi, A. S.; Hansen, S. D.; Southall, J. W.

1973-01-01

IPAD was defined as a total system oriented to the product design process. This total system was designed to recognize the product design process, individuals and their design process tasks, and the computer-based IPAD System to aid product design. Principal elements of the IPAD System include the host computer and its interactive system software, new executive and data management software, and an open-ended IPAD library of technical programs to match the intended product design process. The basic goal of the IPAD total system is to increase the productivity of the product design organization. Increases in individual productivity were feasible through automation and computer support of routine information handling. Such proven automation can directly decrease cost and flowtime in the product design process.

Adapting Nielsen’s Design Heuristics to Dual Processing for Clinical Decision Support

PubMed Central

Taft, Teresa; Staes, Catherine; Slager, Stacey; Weir, Charlene

2016-01-01

The study objective was to improve the applicability of Nielson’s standard design heuristics for evaluating electronic health record (EHR) alerts and linked ordering support by integrating them with Dual Process theory. Through initial heuristic evaluation and a user study of 7 physicians, usability problems were identified. Through independent mapping of specific usability criteria to support for each of the Dual Cognitive processes (S1 and S2) and deliberation, agreement was reached on mapping criteria. Finally, usability errors from the heuristic and user study were mapped to S1 and S2. Adding a dual process perspective to specific heuristic analysis increases the applicability and relevance of computerized health information design evaluations. This mapping enables designers to measure that their systems are tailored to support attention allocation. System 1 will be supported by improving pattern recognition and saliency, and system 2 through efficiency and control of information access. PMID:28269915

Adapting Nielsen's Design Heuristics to Dual Processing for Clinical Decision Support.

PubMed

Taft, Teresa; Staes, Catherine; Slager, Stacey; Weir, Charlene

2016-01-01

The study objective was to improve the applicability of Nielson's standard design heuristics for evaluating electronic health record (EHR) alerts and linked ordering support by integrating them with Dual Process theory. Through initial heuristic evaluation and a user study of 7 physicians, usability problems were identified. Through independent mapping of specific usability criteria to support for each of the Dual Cognitive processes (S1 and S2) and deliberation, agreement was reached on mapping criteria. Finally, usability errors from the heuristic and user study were mapped to S1 and S2. Adding a dual process perspective to specific heuristic analysis increases the applicability and relevance of computerized health information design evaluations. This mapping enables designers to measure that their systems are tailored to support attention allocation. System 1 will be supported by improving pattern recognition and saliency, and system 2 through efficiency and control of information access.

Gathering Information from Transport Systems for Processing in Supply Chains

NASA Astrophysics Data System (ADS)

Kodym, Oldřich; Unucka, Jakub

2016-12-01

Paper deals with complex system for processing information from means of transport acting as parts of train (rail or road). It focuses on automated information gathering using AutoID technology, information transmission via Internet of Things networks and information usage in information systems of logistic firms for support of selected processes on MES and ERP levels. Different kinds of gathered information from whole transport chain are discussed. Compliance with existing standards is mentioned. Security of information in full life cycle is integral part of presented system. Design of fully equipped system based on synthesized functional nodes is presented.

7 CFR 1208.11 - Information.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 10 2014-01-01 2014-01-01 false Information. 1208.11 Section 1208.11 Agriculture..., RESEARCH, AND INFORMATION ORDER Processed Raspberry Promotion, Research, and Information Order Definitions § 1208.11 Information. Information means information and programs that are designed to increase...

7 CFR 1208.11 - Information.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 10 2013-01-01 2013-01-01 false Information. 1208.11 Section 1208.11 Agriculture..., RESEARCH, AND INFORMATION ORDER Processed Raspberry Promotion, Research, and Information Order Definitions § 1208.11 Information. Information means information and programs that are designed to increase...

Towards a systems approach to risk considerations for concurrent design

NASA Technical Reports Server (NTRS)

Meshkat, Leila; Oberto, Robert E.

2004-01-01

This paper describes the new process used by the Project Design Center at NASA's Jet Propulsion Laboratory for the identification, assessment and communication of risk elements throughout the lifecycle of a mission design. This process includes a software tool, 'RAP' that collects and communicates risk information between the various designers and a 'risk expert' who mediates this process. The establishment of this process is an attempt towards the systematic consideration of risk in the design decision making process. Using this process, we are able to better keep track of the risks associated with the design decisions. Furthermore, it helps us develop better risk profiles for the studies under consideration. We aim to refine and expand the current process to enable more thorough risk analysis capabilities in the future.

Virtual Model Validation of Complex Multiscale Systems: Applications to Nonlinear Elastostatics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oden, John Tinsley; Prudencio, Ernest E.; Bauman, Paul T.

We propose a virtual statistical validation process as an aid to the design of experiments for the validation of phenomenological models of the behavior of material bodies, with focus on those cases in which knowledge of the fabrication process used to manufacture the body can provide information on the micro-molecular-scale properties underlying macroscale behavior. One example is given by models of elastomeric solids fabricated using polymerization processes. We describe a framework for model validation that involves Bayesian updates of parameters in statistical calibration and validation phases. The process enables the quanti cation of uncertainty in quantities of interest (QoIs) andmore » the determination of model consistency using tools of statistical information theory. We assert that microscale information drawn from molecular models of the fabrication of the body provides a valuable source of prior information on parameters as well as a means for estimating model bias and designing virtual validation experiments to provide information gain over calibration posteriors.« less

Feasibility of Computer Processing of Technical Information on the Design of Instructional Systems. Final Report for the Period 1 July 1972 through 31 March 1973.

ERIC Educational Resources Information Center

Scheffler, F. L.; And Others

A feasibility study examined the capability of a computer-based system's handling of technical information pertinent to the design of instructional systems. Structured interviews were held to assess the information needs of both researchers and practitioners and an investigation was conducted of 10 computer-based information storage and retrieval…

[Quality by design approaches for pharmaceutical development and manufacturing of Chinese medicine].

PubMed

Xu, Bing; Shi, Xin-Yuan; Wu, Zhi-Sheng; Zhang, Yan-Ling; Wang, Yun; Qiao, Yan-Jiang

2017-03-01

The pharmaceutical quality was built by design, formed in the manufacturing process and improved during the product's lifecycle. Based on the comprehensive literature review of pharmaceutical quality by design (QbD), the essential ideas and implementation strategies of pharmaceutical QbD were interpreted. Considering the complex nature of Chinese medicine, the "4H" model was innovated and proposed for implementing QbD in pharmaceutical development and industrial manufacture of Chinese medicine product. "4H" corresponds to the acronym of holistic design, holistic information analysis, holistic quality control, and holistic process optimization, which is consistent with the holistic concept of Chinese medicine theory. The holistic design aims at constructing both the quality problem space from the patient requirement and the quality solution space from multidisciplinary knowledge. Holistic information analysis emphasizes understanding the quality pattern of Chinese medicine by integrating and mining multisource data and information at a relatively high level. The batch-to-batch quality consistence and manufacturing system reliability can be realized by comprehensive application of inspective quality control, statistical quality control, predictive quality control and intelligent quality control strategies. Holistic process optimization is to improve the product quality and process capability during the product lifecycle management. The implementation of QbD is useful to eliminate the ecosystem contradictions lying in the pharmaceutical development and manufacturing process of Chinese medicine product, and helps guarantee the cost effectiveness. Copyright© by the Chinese Pharmaceutical Association.

Whisper: Tracing the Spatiotemporal Process of Information Diffusion in Real Time.

PubMed

Cao, Nan; Lin, Yu-Ru; Sun, Xiaohua; Lazer, D; Liu, Shixia; Qu, Huamin

2012-12-01

When and where is an idea dispersed? Social media, like Twitter, has been increasingly used for exchanging information, opinions and emotions about events that are happening across the world. Here we propose a novel visualization design, "Whisper", for tracing the process of information diffusion in social media in real time. Our design highlights three major characteristics of diffusion processes in social media: the temporal trend, social-spatial extent, and community response of a topic of interest. Such social, spatiotemporal processes are conveyed based on a sunflower metaphor whose seeds are often dispersed far away. In Whisper, we summarize the collective responses of communities on a given topic based on how tweets were retweeted by groups of users, through representing the sentiments extracted from the tweets, and tracing the pathways of retweets on a spatial hierarchical layout. We use an efficient flux line-drawing algorithm to trace multiple pathways so the temporal and spatial patterns can be identified even for a bursty event. A focused diffusion series highlights key roles such as opinion leaders in the diffusion process. We demonstrate how our design facilitates the understanding of when and where a piece of information is dispersed and what are the social responses of the crowd, for large-scale events including political campaigns and natural disasters. Initial feedback from domain experts suggests promising use for today's information consumption and dispersion in the wild.

Development of shared decision-making resources to help inform difficult healthcare decisions: An example focused on dysvascular partial foot and transtibial amputations.

PubMed

Quigley, Matthew; Dillon, Michael P; Fatone, Stefania

2018-02-01

Shared decision making is a consultative process designed to encourage patient participation in decision making by providing accurate information about the treatment options and supporting deliberation with the clinicians about treatment options. The process can be supported by resources such as decision aids and discussion guides designed to inform and facilitate often difficult conversations. As this process increases in use, there is opportunity to raise awareness of shared decision making and the international standards used to guide the development of quality resources for use in areas of prosthetic/orthotic care. To describe the process used to develop shared decision-making resources, using an illustrative example focused on decisions about the level of dysvascular partial foot amputation or transtibial amputation. Development process: The International Patient Decision Aid Standards were used to guide the development of the decision aid and discussion guide focused on decisions about the level of dysvascular partial foot amputation or transtibial amputation. Examples from these shared decision-making resources help illuminate the stages of development including scoping and design, research synthesis, iterative development of a prototype, and preliminary testing with patients and clinicians not involved in the development process. Lessons learnt through the process, such as using the International Patient Decision Aid Standards checklist and development guidelines, may help inform others wanting to develop similar shared decision-making resources given the applicability of shared decision making to many areas of prosthetic-/orthotic-related practice. Clinical relevance Shared decision making is a process designed to guide conversations that help patients make an informed decision about their healthcare. Raising awareness of shared decision making and the international standards for development of high-quality decision aids and discussion guides is important as the approach is introduced in prosthetic-/orthotic-related practice.

Designing-and Redesigning-Information Services for Maximum Impact.

ERIC Educational Resources Information Center

Jones, Rebecca; Dysart, Jane

2002-01-01

Discusses innovative information services, including new services and the redesign of existing services. Describes the development process, including assessing the market and developing a marketing plan; and explains the implementation process, including monitoring client satisfaction and quality control. (LRW)

Web-Based Tools for Designing and Developing Teaching Materials for Integration of Information Technology into Instruction

ERIC Educational Resources Information Center

Chang, Kuo-En; Sung, Yao-Ting; Hou, Huei-Tse

2006-01-01

Educational software for teachers is an important, yet usually ignored, link for integrating information technology into classroom instruction. This study builds a web-based teaching material design and development system. The process in the system is divided into four stages, analysis, design, development, and practice. Eight junior high school…

Risk Informed Assessment of Regulatory and Design Requirements for Future Nuclear Power Plants - Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ritterbusch, Stanley; Golay, Michael; Duran, Felicia

2003-01-29

OAK B188 Summary of methods proposed for risk informing the design and regulation of future nuclear power plants. All elements of the historical design and regulation process are preserved, but the methods proposed for new plants use probabilistic risk assessment methods as the primary decision making tool.

7 CFR 1218.10 - Information.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 10 2012-01-01 2012-01-01 false Information. 1218.10 Section 1218.10 Agriculture... INFORMATION ORDER Blueberry Promotion, Research, and Information Order Definitions § 1218.10 Information. Information means information and programs that are designed to increase efficiency in processing and to...

7 CFR 1216.13 - Information.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 10 2013-01-01 2013-01-01 false Information. 1216.13 Section 1216.13 Agriculture... INFORMATION ORDER Peanut Promotion, Research, and Information Order Definitions § 1216.13 Information. Information means information and programs that are designed to increase efficiency in processing and to...

7 CFR 1216.13 - Information.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 10 2012-01-01 2012-01-01 false Information. 1216.13 Section 1216.13 Agriculture... INFORMATION ORDER Peanut Promotion, Research, and Information Order Definitions § 1216.13 Information. Information means information and programs that are designed to increase efficiency in processing and to...

7 CFR 1216.13 - Information.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 10 2011-01-01 2011-01-01 false Information. 1216.13 Section 1216.13 Agriculture... INFORMATION ORDER Peanut Promotion, Research, and Information Order Definitions § 1216.13 Information. Information means information and programs that are designed to increase efficiency in processing and to...

7 CFR 1218.10 - Information.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 10 2014-01-01 2014-01-01 false Information. 1218.10 Section 1218.10 Agriculture... INFORMATION ORDER Blueberry Promotion, Research, and Information Order Definitions § 1218.10 Information. Information means information and programs that are designed to increase efficiency in processing and to...

7 CFR 1218.10 - Information.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 10 2013-01-01 2013-01-01 false Information. 1218.10 Section 1218.10 Agriculture... INFORMATION ORDER Blueberry Promotion, Research, and Information Order Definitions § 1218.10 Information. Information means information and programs that are designed to increase efficiency in processing and to...

7 CFR 1218.10 - Information.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 10 2011-01-01 2011-01-01 false Information. 1218.10 Section 1218.10 Agriculture... INFORMATION ORDER Blueberry Promotion, Research, and Information Order Definitions § 1218.10 Information. Information means information and programs that are designed to increase efficiency in processing and to...

7 CFR 1216.13 - Information.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 10 2014-01-01 2014-01-01 false Information. 1216.13 Section 1216.13 Agriculture... INFORMATION ORDER Peanut Promotion, Research, and Information Order Definitions § 1216.13 Information. Information means information and programs that are designed to increase efficiency in processing and to...

7 CFR 1216.13 - Information.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Information. 1216.13 Section 1216.13 Agriculture... INFORMATION ORDER Peanut Promotion, Research, and Information Order Definitions § 1216.13 Information. Information means information and programs that are designed to increase efficiency in processing and to...

7 CFR 1218.10 - Information.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Information. 1218.10 Section 1218.10 Agriculture... INFORMATION ORDER Blueberry Promotion, Research, and Information Order Definitions § 1218.10 Information. Information means information and programs that are designed to increase efficiency in processing and to...

The Design and Implementation of a Management Information System to Facilitate the Functioning of a CBTE Program.

ERIC Educational Resources Information Center

Neuhauser, Charlotte

The Vocational and Applied Arts (VAE) Management Information System (MIS) is designed to select, store, process, and transmit information needed in a competency-based teacher education (CBTE) program. The system is computerized and is composed of six subsystems which deal with admissions, class scheduling, faculty loads, instruction, field…

A social information processing approach to job attitudes and task design.

PubMed

Salancik, G R; Pfeffer, J

1978-06-01

This article outlines a social information processing approach to explain job attitudes. In comparison with need-satisfaction and expectancy models to job attitudes and motivation, the social information processing perspective emphasizes the effects of context and the consequences of past choices, rather than individual predispositions and rational decision-making processes. When an individual develops statements about attitude or needs, he or she uses social information--information about past behavior and about what others think. The process of attributing attitudes or needs from behavior is itself affected by commitment processes, by the saliency and relevance of information, and by the need to develop socially acceptable and legitimate rationalizations for actions. Both attitudes and need statements, as well as characterizations of jobs, are affected by informational social influence. The implications of the social information processing perspective for organization development efforts and programs of job redesign are discussed.

Recoding Numerics to Geometrics for Complex Discrimination Tasks; A Feasibility Study of Coding Strategy.

ERIC Educational Resources Information Center

Simpkins, John D.

Processing complex multivariate information effectively when relational properties of information sub-groups are ambiguous is difficult for man and man-machine systems. However, the information processing task is made easier through code study, cybernetic planning, and accurate display mechanisms. An exploratory laboratory study designed for the…

Transforming information from silicon testing and design characterization into numerical data sets for yield learning

NASA Astrophysics Data System (ADS)

Yang, Thomas; Shen, Yang; Zhang, Yifan; Sweis, Jason; Lai, Ya-Chieh

2017-03-01

Silicon testing results are regularly collected for a particular lot of wafers to study yield loss from test result diagnostics. Product engineers will analyze the diagnostic results and perform a number of physical failure analyses to detect systematic defects which cause yield loss for these sets of wafers in order to feedback the information to process engineers for process improvements. Most of time, the systematic defects that are detected are major issues or just one of the causes for the overall yield loss. This paper will present a working flow for using design analysis techniques combined with diagnostic methods to systematically transform silicon testing information into physical layout information. A new set of the testing results are received from a new lot of wafers for the same product. We can then correlate all the diagnostic results from different periods of time to check which blocks or nets have been highlighted or stop occurring on the failure reports in order to monitor process changes which impact the yield. The design characteristic analysis flow is also implemented to find 1) the block connections on a design that have failed electrical test or 2) frequently used cells that been highlighted multiple times.

Rotorcraft Conceptual Design Environment

NASA Technical Reports Server (NTRS)

Johnson, Wayne; Sinsay, Jeffrey

2009-01-01

Requirements for a rotorcraft conceptual design environment are discussed, from the perspective of a government laboratory. Rotorcraft design work in a government laboratory must support research, by producing technology impact assessments and defining the context for research and development; and must support the acquisition process, including capability assessments and quantitative evaluation of designs, concepts, and alternatives. An information manager that will enable increased fidelity of analysis early in the design effort is described. This manager will be a framework to organize information that describes the aircraft, and enable movement of that information to and from analyses. Finally, a recently developed rotorcraft system analysis tool is described.

Rotorcraft Conceptual Design Environment

NASA Technical Reports Server (NTRS)

Johnson, Wayne; Sinsay, Jeffrey D.

2010-01-01

Requirements for a rotorcraft conceptual design environment are discussed, from the perspective of a government laboratory. Rotorcraft design work in a government laboratory must support research, by producing technology impact assessments and defining the context for research and development; and must support the acquisition process, including capability assessments and quantitative evaluation of designs, concepts, and alternatives. An information manager that will enable increased fidelity of analysis early in the design effort is described. This manager will be a framework to organize information that describes the aircraft, and enable movement of that information to and from analyses. Finally, a recently developed rotorcraft system analysis tool is described.

Method for Examination and Documentation of Basic Information and Metadata from Published Reports Relevant to the Study of Stormwater Runoff Quality

USGS Publications Warehouse

Dionne, Shannon G.; Granato, Gregory E.; Tana, Cameron K.

1999-01-01

A readily accessible archive of information that is valid, current, and technically defensible is needed to make informed highway-planning, design, and management decisions. The National Highway Runoff Water-Quality Data and Methodology Synthesis (NDAMS) is a cataloging and assessment of the documentation of information relevant to highway-runoff water quality available in published reports. The report review process is based on the NDAMS review sheet, which was designed by the USGS with input from the FHWA, State transportation agencies, and the regulatory community. The report-review process is designed to determine the technical merit of the existing literature in terms of current requirements for data documentation, data quality, quality assurance and quality control (QA/QC), and technical issues that may affect the use of historical data. To facilitate the review process, the NDAMS review sheet is divided into 12 sections: (1) administrative review information, (2) investigation and report information, (3) temporal information, (4) location information (5) water-quality-monitoring information, (6) sample-handling methods, (7) constituent information, (8) sampling focus and matrix, (9) flow monitoring methods, (10) field QA/QC, (11) laboratory, and (12) uncertainty/error analysis. This report describes the NDAMS report reviews and metadata documentation methods and provides an overview of the approach and of the quality-assurance and quality-control program used to implement the review process. Detailed information, including a glossary of relevant terms, a copy of the report-review sheets, and reportreview instructions are completely documented in a series of three appendixes included with this report. Therefore the reviews are repeatable and the methods can be used by transportation research organizations to catalog new reports as they are published.

Using the cognitive interviewing process to improve survey design by allied health: A qualitative study.

PubMed

Howlett, Owen; McKinstry, Carol; Lannin, Natasha A

2018-04-01

Allied health professionals frequently use surveys to collect data for clinical practice and service improvement projects. Careful development and piloting of purpose-designed surveys is important to ensure intended measuring (that respondents correctly interpret survey items when responding). Cognitive interviewing is a specific technique that can improve the design of self-administered surveys. The aim of this study was to describe the use of the cognitive interviewing process to improve survey design, which involved a purpose-designed, online survey evaluating staff use of functional electrical stimulation. A qualitative study involving one round of cognitive interviewing with three occupational therapists and three physiotherapists. The cognitive interviewing process identified 11 issues with the draft survey, which could potentially influence the validity and quality of responses. The raised issues included difficulties with: processing the question to be able to respond, determining a response to the question, retrieving relevant information from memory and comprehending the written question. Twelve survey amendments were made following the cognitive interviewing process, comprising four additions, seven revisions and one correction. The cognitive interviewing process applied during the development of a purpose-designed survey enabled the identification of potential problems and informed revisions to the survey prior to its use. © 2017 Occupational Therapy Australia.

Medication incident reporting in residential aged care facilities: Limitations and risks to residents’ safety

PubMed Central

2012-01-01

Background Medication incident reporting (MIR) is a key safety critical care process in residential aged care facilities (RACFs). Retrospective studies of medication incident reports in aged care have identified the inability of existing MIR processes to generate information that can be used to enhance residents’ safety. However, there is little existing research that investigates the limitations of the existing information exchange process that underpins MIR, despite the considerable resources that RACFs’ devote to the MIR process. The aim of this study was to undertake an in-depth exploration of the information exchange process involved in MIR and identify factors that inhibit the collection of meaningful information in RACFs. Methods The study was undertaken in three RACFs (part of a large non-profit organisation) in NSW, Australia. A total of 23 semi-structured interviews and 62 hours of observation sessions were conducted between May to July 2011. The qualitative data was iteratively analysed using a grounded theory approach. Results The findings highlight significant gaps in the design of the MIR artefacts as well as information exchange issues in MIR process execution. Study results emphasized the need to: a) design MIR artefacts that facilitate identification of the root causes of medication incidents, b) integrate the MIR process within existing information systems to overcome key gaps in information exchange execution, and c) support exchange of information that can facilitate a multi-disciplinary approach to medication incident management in RACFs. Conclusions This study highlights the advantages of viewing MIR process holistically rather than as segregated tasks, as a means to identify gaps in information exchange that need to be addressed in practice to improve safety critical processes. PMID:23122411

DESIGNING EFFICIENT, ECONOMIC AND ENVIRONMENTALLY FRIENDLY CHEMICAL PROCESSES

EPA Science Inventory

A catalytic reforming process has been studied using hierarchical design and simulation calculations. Aproximations for the fugitive emissions indicate which streams allow the most value to be lost and which have the highest potential environmental impact. One can use tis inform...

Overview of the Integrated Programs for Aerospace Vehicle Design (IPAD) project

NASA Technical Reports Server (NTRS)

Venneri, S. L.

1983-01-01

To respond to national needs for improved productivity in engineering design and manufacturing, a NASA supported joint industry/government project is underway denoted Integrated Programs for Aerospace Vehicle Design (IPAD). The objective is to improve engineering productivity through better use of computer technology. It focuses on development of data base management technology and associated software for integrated company wide management of engineering and manufacturing information. Results to date on the IPAD project include an in depth documentation of a representative design process for a large engineering project, the definition and design of computer aided design software needed to support that process, and the release of prototype software to manage engineering information. This paper provides an overview of the IPAD project and summarizes progress to date and future plans.

Model medication management process in Australian nursing homes using business process modeling.

PubMed

Qian, Siyu; Yu, Ping

2013-01-01

One of the reasons for end user avoidance or rejection to use health information systems is poor alignment of the system with healthcare workflow, likely causing by system designers' lack of thorough understanding about healthcare process. Therefore, understanding the healthcare workflow is the essential first step for the design of optimal technologies that will enable care staff to complete the intended tasks faster and better. The often use of multiple or "high risk" medicines by older people in nursing homes has the potential to increase medication error rate. To facilitate the design of information systems with most potential to improve patient safety, this study aims to understand medication management process in nursing homes using business process modeling method. The paper presents study design and preliminary findings from interviewing two registered nurses, who were team leaders in two nursing homes. Although there were subtle differences in medication management between the two homes, major medication management activities were similar. Further field observation will be conducted. Based on the data collected from observations, an as-is process model for medication management will be developed.

A synthetic design environment for ship design

NASA Technical Reports Server (NTRS)

Chipman, Richard R.

1995-01-01

Rapid advances in computer science and information system technology have made possible the creation of synthetic design environments (SDE) which use virtual prototypes to increase the efficiency and agility of the design process. This next generation of computer-based design tools will rely heavily on simulation and advanced visualization techniques to enable integrated product and process teams to concurrently conceptualize, design, and test a product and its fabrication processes. This paper summarizes a successful demonstration of the feasibility of using a simulation based design environment in the shipbuilding industry. As computer science and information science technologies have evolved, there have been many attempts to apply and integrate the new capabilities into systems for the improvement of the process of design. We see the benefits of those efforts in the abundance of highly reliable, technologically complex products and services in the modern marketplace. Furthermore, the computer-based technologies have been so cost effective that the improvements embodied in modern products have been accompanied by lowered costs. Today the state-of-the-art in computerized design has advanced so dramatically that the focus is no longer on merely improving design methodology; rather the goal is to revolutionize the entire process by which complex products are conceived, designed, fabricated, tested, deployed, operated, maintained, refurbished and eventually decommissioned. By concurrently addressing all life-cycle issues, the basic decision making process within an enterprise will be improved dramatically, leading to new levels of quality, innovation, efficiency, and customer responsiveness. By integrating functions and people with an enterprise, such systems will change the fundamental way American industries are organized, creating companies that are more competitive, creative, and productive.

User-centered requirements engineering in health information systems: a study in the hemophilia field.

PubMed

Teixeira, Leonor; Ferreira, Carlos; Santos, Beatriz Sousa

2012-06-01

The use of sophisticated information and communication technologies (ICTs) in the health care domain is a way to improve the quality of services. However, there are also hazards associated with the introduction of ICTs in this domain and a great number of projects have failed due to the lack of systematic consideration of human and other non-technology issues throughout the design or implementation process, particularly in the requirements engineering process. This paper presents the methodological approach followed in the design process of a web-based information system (WbIS) for managing the clinical information in hemophilia care, which integrates the values and practices of user-centered design (UCD) activities into the principles of software engineering, particularly in the phase of requirements engineering (RE). This process followed a paradigm that combines a grounded theory for data collection with an evolutionary design based on constant development and refinement of the generic domain model using three well-known methodological approaches: (a) object-oriented system analysis; (b) task analysis; and, (c) prototyping, in a triangulation work. This approach seems to be a good solution for the requirements engineering process in this particular case of the health care domain, since the inherent weaknesses of individual methods are reduced, and emergent requirements are easier to elicit. Moreover, the requirements triangulation matrix gives the opportunity to look across the results of all used methods and decide what requirements are critical for the system success. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Evaluation of a Spatial Data Management System for Basic Skills Education

DTIC Science & Technology

1986-03-01

levels (see Craik & Lockhart , 1972). These methods include verbal and imaginal elaboration (Weinstein, 1978; Weinstein et al., 1979), and a variety of...strategies at a more specific level . I . Information processing strategies are methods to aid acquisition, retention, or retrieval of information. These...methods generally are designed to force students to process information at deeper, semantic or imaginal, levels of processing , rather than at shallower

Technological Improvements for Digital Fire Control Systems

DTIC Science & Technology

2017-09-30

Final Technical Status Report For DOTC-12-01-INIT061 Technological Improvements for Digital Fire Control Systems Reporting Period: 30 Sep...Initiative Information Develop and fabricate next generation designs using advanced materials and processes. This will include but is not limited to...4.2 Develop manufacturing processes 100% 4.3 Develop manufacturing processes 100% 4.4 Develop manufacturing processes 100% 5 Design Tooling

Age and Visual Information Processing.

ERIC Educational Resources Information Center

Gummerman, Kent; And Others

This paper reports on three studies concerned with aspects of human visual information processing. Study I was an effort to measure the duration of iconic storage using a partial report method in children ranging in age from 6 to 13 years. Study II was designed to detect age related changes in the rate of processing (perceptually encoding) letters…

Development of Integrated Programs for Aerospace-Vehicle Design (IPAD) - IPAD user requirements

NASA Technical Reports Server (NTRS)

Anderton, G. L.

1979-01-01

Results of a requirements analysis task for Integrated Programs for Aerospace Vehicle Design (IPAD) are presented. User requirements which, in part, will shape the IPAD system design are given. Requirements considered were: generation, modification, storage, retrieval, communication, reporting, and protection of information. Data manipulation and controls on the system and the information were also considered. Specific needs relative to the product design process are also discussed.

Task-oriented display design - Concept and example

NASA Technical Reports Server (NTRS)

Abbott, Terence S.

1989-01-01

The general topic was in the area of display design alternatives for improved man-machine performance. The intent was to define and assess a display design concept oriented toward providing this task-oriented information. The major focus of this concept deals with the processing of data into parameters that are more relevant to the task of the human operator. Closely coupled to this concept of relevant information is the form or manner in which this information is actually presented. Conventional forms of presentation are normally a direct representation of the underlying data. By providing information in a form that is more easily assimilated and understood, a reduction in human error and cognitive workload may be obtained. A description of this proposed concept with a design example is provided. The application for the example was an engine display for a generic, twin-engine civil transport aircraft. The product of this concept was evaluated against a functionally similar, traditional display. The results of this evaluation showed that a task-oriented approach to design is a viable concept with regard to reducing user error and cognitive workload. The goal of this design process, providing task-oriented information to the user, both in content and form, appears to be a feasible mechanism for increasing the overall performance of a man-machine system.

Task-oriented display design: Concept and example

NASA Technical Reports Server (NTRS)

Abbott, Terence S.

1989-01-01

The general topic was in the area of display design alternatives for improved man-machine performance. The intent was to define and assess a display design concept oriented toward providing this task-oriented information. The major focus of this concept deals with the processing of data into parameters that are more relevant to the task of the human operator. Closely coupled to this concept of relevant information is the form or manner in which this information is actually presented. Conventional forms of presentation are normally a direct representation of the underlying data. By providing information in a form that is more easily assimilated and understood, a reduction in human error and cognitive workload may be obtained. A description of this proposed concept with a design example is provided. The application for the example was an engine display for a generic, twin-engine civil transport aircraft. The product of this concept was evaluated against a functionally similar, traditional display. The results of this evaluation showed that a task-oriented approach to design is a viable concept with regard to reducing user error and cognitive workload. The goal of this design process, providing task-oriented information to the user, both in content and form, appears to be a feasible mechanism for increasing the overall performance of a man-machine system.

DESIGN AND EVALUATION OF INDIVIDUAL ELEMENTS OF THE INTERFACE FOR AN AGRICULTURAL MACHINE.

PubMed

Rakhra, Aadesh K; Mann, Danny D

2018-01-29

If a user-centered approach is not used to design information displays, the quantity and quality of information presented to the user may not match the needs of the user, or it may exceed the capability of the human operator for processing and using that information. The result may be an excessive mental workload and reduced situation awareness of the operator, which can negatively affect the machine performance and operational outcomes. The increasing use of technology in agricultural machines may expose the human operator to excessive and undesirable information if the operator's information needs and information processing capabilities are ignored. In this study, a user-centered approach was used to design specific interface elements for an agricultural air seeder. Designs of the interface elements were evaluated in a laboratory environment by developing high-fidelity prototypes. Evaluations of the user interface elements yielded significant improvement in situation awareness (up to 11%; overall mean difference = 5.0 (4.8%), 95% CI (6.4728, 3.5939), p 0.0001). Mental workload was reduced by up to 19.7% (overall mean difference = -5.2 (-7.9%), n = 30, a = 0.05). Study participants rated the overall performance of the newly designed user-centered interface elements higher in comparison to the previous designs (overall mean difference = 27.3 (189.8%), 99% CI (35.150, 19.384), p 0.0001. Copyright© by the American Society of Agricultural Engineers.

Operational concepts and implementation strategies for the design configuration management process.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Trauth, Sharon Lee

2007-05-01

This report describes operational concepts and implementation strategies for the Design Configuration Management Process (DCMP). It presents a process-based systems engineering model for the successful configuration management of the products generated during the operation of the design organization as a business entity. The DCMP model focuses on Pro/E and associated activities and information. It can serve as the framework for interconnecting all essential aspects of the product design business. A design operation scenario offers a sense of how to do business at a time when DCMP is second nature within the design organization.

Guideline for Performing Systematic Approach to Evaluate and Qualify Legacy Documents that Support Advanced Reactor Technology Activity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Honma, George

The establishment of a systematic process for the evaluation of historic technology information for use in advanced reactor licensing is described. Efforts are underway to recover and preserve Experimental Breeder Reactor II and Fast Flux Test Facility historical data. These efforts have generally emphasized preserving information from data-acquisition systems and hard-copy reports and entering it into modern electronic formats suitable for data retrieval and examination. The guidance contained in this document has been developed to facilitate consistent and systematic evaluation processes relating to quality attributes of historic technical information (with focus on sodium-cooled fast reactor (SFR) technology) that will bemore » used to eventually support licensing of advanced reactor designs. The historical information may include, but is not limited to, design documents for SFRs, research-and-development (R&D) data and associated documents, test plans and associated protocols, operations and test data, international research data, technical reports, and information associated with past U.S. Nuclear Regulatory Commission (NRC) reviews of SFR designs. The evaluation process is prescribed in terms of SFR technology, but the process can be used to evaluate historical information for any type of advanced reactor technology. An appendix provides a discussion of typical issues that should be considered when evaluating and qualifying historical information for advanced reactor technology fuel and source terms, based on current light water reactor (LWR) requirements and recent experience gained from Next Generation Nuclear Plant (NGNP).« less

Natural Resource Information System, design analysis

NASA Technical Reports Server (NTRS)

1972-01-01

The computer-based system stores, processes, and displays map data relating to natural resources. The system was designed on the basis of requirements established in a user survey and an analysis of decision flow. The design analysis effort is described, and the rationale behind major design decisions, including map processing, cell vs. polygon, choice of classification systems, mapping accuracy, system hardware, and software language is summarized.

Charting the Course: Life Cycle Management of Mars Mission Digital Information

NASA Technical Reports Server (NTRS)

Reiz, Julie M.

2003-01-01

This viewgraph presentation reviews the life cycle management of MER Project information. This process was an essential key to the successful launch of the MER Project rovers. Incorporating digital information archive requirements early in the project life cycle resulted in: Design of an information system that included archive metadata, Reduced the risk of information loss through in-process appraisal, Easier transfer of project information to institutional online archive and Project appreciation for preserving information for reuse by future projects

Understanding the nature of information seeking behavior in critical care: implications for the design of health information technology.

PubMed

Kannampallil, Thomas G; Franklin, Amy; Mishra, Rashmi; Almoosa, Khalid F; Cohen, Trevor; Patel, Vimla L

2013-01-01

Information in critical care environments is distributed across multiple sources, such as paper charts, electronic records, and support personnel. For decision-making tasks, physicians have to seek, gather, filter and organize information from various sources in a timely manner. The objective of this research is to characterize the nature of physicians' information seeking process, and the content and structure of clinical information retrieved during this process. Eight medical intensive care unit physicians provided a verbal think-aloud as they performed a clinical diagnosis task. Verbal descriptions of physicians' activities, sources of information they used, time spent on each information source, and interactions with other clinicians were captured for analysis. The data were analyzed using qualitative and quantitative approaches. We found that the information seeking process was exploratory and iterative and driven by the contextual organization of information. While there was no significant differences between the overall time spent paper or electronic records, there was marginally greater relative information gain (i.e., more unique information retrieved per unit time) from electronic records (t(6)=1.89, p=0.1). Additionally, information retrieved from electronic records was at a higher level (i.e., observations and findings) in the knowledge structure than paper records, reflecting differences in the nature of knowledge utilization across resources. A process of local optimization drove the information seeking process: physicians utilized information that maximized their information gain even though it required significantly more cognitive effort. Implications for the design of health information technology solutions that seamlessly integrate information seeking activities within the workflow, such as enriching the clinical information space and supporting efficient clinical reasoning and decision-making, are discussed. Copyright © 2012 Elsevier B.V. All rights reserved.

Utilization of a Multi-Disciplinary Approach to Building Effective Command Centers: Process and Products

DTIC Science & Technology

2005-06-01

cognitive task analysis , organizational information dissemination and interaction, systems engineering, collaboration and communications processes, decision-making processes, and data collection and organization. By blending these diverse disciplines command centers can be designed to support decision-making, cognitive analysis, information technology, and the human factors engineering aspects of Command and Control (C2). This model can then be used as a baseline when dealing with work in areas of business processes, workflow engineering, information management,

The Development and Evaluation of a Multimedia Resource To Support ICT Training: Design Issues, Training Processes and User Experiences.

ERIC Educational Resources Information Center

Tearle, Penni; Dillon, Patrick

2001-01-01

Addresses issues surrounding the process of information and communications technology training (ICT), and the application of training outcomes in the workplace. Provides an overview of content and design features of the multimedia resource "Ensuring Effectiveness of ICT Training" and reports on its evaluation. Discusses design issues, training…

48 CFR 434.003 - Responsibilities.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) individually or as a group will participate in this decision making process. (b) The Chief Information Officer (CIO) is the Major Information Technology Systems Executive. For acquisitions of information technology... information technology system acquisition, designating an acquisition to be a major information technology...

48 CFR 434.003 - Responsibilities.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) individually or as a group will participate in this decision making process. (b) The Chief Information Officer (CIO) is the Major Information Technology Systems Executive. For acquisitions of information technology... information technology system acquisition, designating an acquisition to be a major information technology...

48 CFR 434.003 - Responsibilities.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) individually or as a group will participate in this decision making process. (b) The Chief Information Officer (CIO) is the Major Information Technology Systems Executive. For acquisitions of information technology... information technology system acquisition, designating an acquisition to be a major information technology...

48 CFR 434.003 - Responsibilities.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) individually or as a group will participate in this decision making process. (b) The Chief Information Officer (CIO) is the Major Information Technology Systems Executive. For acquisitions of information technology... information technology system acquisition, designating an acquisition to be a major information technology...

A DNA network as an information processing system.

PubMed

Santini, Cristina Costa; Bath, Jonathan; Turberfield, Andrew J; Tyrrell, Andy M

2012-01-01

Biomolecular systems that can process information are sought for computational applications, because of their potential for parallelism and miniaturization and because their biocompatibility also makes them suitable for future biomedical applications. DNA has been used to design machines, motors, finite automata, logic gates, reaction networks and logic programs, amongst many other structures and dynamic behaviours. Here we design and program a synthetic DNA network to implement computational paradigms abstracted from cellular regulatory networks. These show information processing properties that are desirable in artificial, engineered molecular systems, including robustness of the output in relation to different sources of variation. We show the results of numerical simulations of the dynamic behaviour of the network and preliminary experimental analysis of its main components.

A Model Designed to Enhance Informed Consent: Experiences From the HIV Prevention Trials Network

PubMed Central

Woodsong, Cynthia; Karim, Quarraisha Abdool

2005-01-01

HIV prevention research in developing countries has resulted in increased attention to and discussion of ethical issues, particularly the issue of the quality of informed consent. We present a conceptual framework for an enhanced informed consent process, drawing on experiences garnered from domestic and international studies conducted by the HIV Prevention Trials Network, funded by the National Institutes of Health. This framework guides the development of an informed consent process designed to help ensure initial and continued comprehension of research participation, with an emphasis on HIV prevention research. Attention is focused at the individual and community levels and on 3 study phases: preenrollment, enrollment, and postenrollment. PMID:15727968

End-User Evaluations of Semantic Web Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCool, Rob; Cowell, Andrew J.; Thurman, David A.

Stanford University's Knowledge Systems Laboratory (KSL) is working in partnership with Battelle Memorial Institute and IBM Watson Research Center to develop a suite of technologies for information extraction, knowledge representation & reasoning, and human-information interaction, in unison entitled 'Knowledge Associates for Novel Intelligence' (KANI). We have developed an integrated analytic environment composed of a collection of analyst associates, software components that aid the user at different stages of the information analysis process. An important part of our participatory design process has been to ensure our technologies and designs are tightly integrate with the needs and requirements of our end users,more » To this end, we perform a sequence of evaluations towards the end of the development process that ensure the technologies are both functional and usable. This paper reports on that process.« less

Informal Learning with Technology: The Effects of Self-Constructing Externalizations

ERIC Educational Resources Information Center

Damnik, Gregor; Proske, Antje; Narciss, Susanne; Körndle, Hermann

2013-01-01

Especially in the context of technology-enhanced informal learning, it is crucial to understand how to design information sources in such a way that learners are not overwhelmed by the demands of the learning process, but at the same time are engaged in higher order thinking processes. Guidance aids learners in dealing with the demands of a…

A Study of Technical Engineering Peer Reviews at NASA

NASA Technical Reports Server (NTRS)

Chao, Lawrence P.; Tumer, Irem Y.; Bell, David G.

2003-01-01

This report describes the state of practices of design reviews at NASA and research into what can be done to improve peer review practices. There are many types of reviews at NASA: required and not, formalized and informal, programmatic and technical. Standing project formal reviews such as the Preliminary Design Review and Critical Design Review are a required part of every project and mission development. However, the technical, engineering peer reviews that support teams' work on such projects are informal, some times ad hoc, and inconsistent across the organization. The goal of this work is to identify best practices and lessons learned from NASA's experience, supported by academic research and methodologies to ultimately improve the process. This research has determined that the organization, composition, scope, and approach of the reviews impact their success. Failure Modes and Effects Analysis (FMEA) can identify key areas of concern before or in the reviews. Product definition tools like the Project Priority Matrix, engineering-focused Customer Value Chain Analysis (CVCA), and project or system-based Quality Function Deployment (QFD) help prioritize resources in reviews. The use of information technology and structured design methodologies can strengthen the engineering peer review process to help NASA work towards error-proofing the design process.

May Stakeholders be Involved in Design Without Informed Consent? The Case of Hidden Design.

PubMed

Pols, A J K

2017-06-01

Stakeholder involvement in design is desirable from both a practical and an ethical point of view. It is difficult to do well, however, and some problems recur again and again, both of a practical nature, e.g. stakeholders acting strategically rather than openly, and of an ethical nature, e.g. power imbalances unduly affecting the outcome of the process. Hidden Design has been proposed as a method to deal with the practical problems of stakeholder involvement. It aims to do so by taking the observation of stakeholder actions, rather than the outcomes of a deliberative process, as its input. Furthermore, it hides from stakeholders the fact that a design process is taking place so that they will not behave differently than they otherwise would. Both aspects of Hidden Design have raised ethical worries. In this paper I make an ethical analysis of what it means for a design process to leave participants uninformed or deceived rather than acquiring their informed consent beforehand, and to use observation of actions rather than deliberation as input for design, using Hidden Design as a case study. This analysis is based on two sets of normative guidelines: the ethical guidelines for psychological research involving deception or uninformed participants from two professional psychological organisations, and Habermasian norms for a fair and just (deliberative) process. It supports the conclusion that stakeholder involvement in design organised in this way can be ethically acceptable, though under a number of conditions and constraints.

Managed care for Medicare: some considerations in designing effective information provision programs.

PubMed

Jayanti, R K

2001-01-01

Consumer information-processing theory provides a useful framework for policy makers concerned with regulating information provided by managed care organizations. The assumption that consumers are rational information processors and providing more information is better is questioned in this paper. Consumer research demonstrates that when faced with an uncertain decision, consumers adopt simplifying strategies leading to sub-optimal choices. A discussion on how consumers process risk information and the effects of various informational formats on decision outcomes is provided. Categorization theory is used to propose guidelines with regard to providing effective information to consumers choosing among competing managed care plans. Public policy implications borne out of consumer information-processing theory conclude the article.

Computer-Aided TRIZ Ideality and Level of Invention Estimation Using Natural Language Processing and Machine Learning

NASA Astrophysics Data System (ADS)

Adams, Christopher; Tate, Derrick

Patent textual descriptions provide a wealth of information that can be used to understand the underlying design approaches that result in the generation of novel and innovative technology. This article will discuss a new approach for estimating Degree of Ideality and Level of Invention metrics from the theory of inventive problem solving (TRIZ) using patent textual information. Patent text includes information that can be used to model both the functions performed by a design and the associated costs and problems that affect a design’s value. The motivation of this research is to use patent data with calculation of TRIZ metrics to help designers understand which combinations of system components and functions result in creative and innovative design solutions. This article will discuss in detail methods to estimate these TRIZ metrics using natural language processing and machine learning with the use of neural networks.

Developments at the Advanced Design Technologies Testbed

NASA Technical Reports Server (NTRS)

VanDalsem, William R.; Livingston, Mary E.; Melton, John E.; Torres, Francisco J.; Stremel, Paul M.

2003-01-01

A report presents background and historical information, as of August 1998, on the Advanced Design Technologies Testbed (ADTT) at Ames Research Center. The ADTT is characterized as an activity initiated to facilitate improvements in aerospace design processes; provide a proving ground for product-development methods and computational software and hardware; develop bridging methods, software, and hardware that can facilitate integrated solutions to design problems; and disseminate lessons learned to the aerospace and information technology communities.

Design requirements for operational earth resources ground data processing

NASA Technical Reports Server (NTRS)

Baldwin, C. J.; Bradford, L. H.; Burnett, E. S.; Hutson, D. E.; Kinsler, B. A.; Kugle, D. R.; Webber, D. S.

1972-01-01

Realistic tradeoff data and evaluation techniques were studied that permit conceptual design of operational earth resources ground processing systems. Methodology for determining user requirements that utilize the limited information available from users is presented along with definitions of sensor capabilities projected into the shuttle/station era. A tentative method is presented for synthesizing candidate ground processing concepts.

EVALUATING POLLUTION PREVENTION PROGRESS (P2P) III: AN ENVIRONMENTAL TOOL FOR SCREENING IN PRODUCT LIFE CYCLE ASSESSMENT AND CHEMICAL PROCESS DESIGN

EPA Science Inventory

P2P is a computer-based tool that supports the comparison of process and product alternatives in terms of environmental impacts. This tool provides screening-level information for use in process design and in product LCA. Twenty one impact categories and data for approximately ...

Robot-Assisted Fracture Surgery: Surgical Requirements and System Design.

PubMed

Georgilas, Ioannis; Dagnino, Giulio; Tarassoli, Payam; Atkins, Roger; Dogramadzi, Sanja

2018-03-09

The design of medical devices is a complex and crucial process to ensure patient safety. It has been shown that improperly designed devices lead to errors and associated accidents and costs. A key element for a successful design is incorporating the views of the primary and secondary stakeholders early in the development process. They provide insights into current practice and point out specific issues with the current processes and equipment in use. This work presents how information from a user-study conducted in the early stages of the RAFS (Robot Assisted Fracture Surgery) project informed the subsequent development and testing of the system. The user needs were captured using qualitative methods and converted to operational, functional, and non-functional requirements based on the methods derived from product design and development. This work presents how the requirements inform a new workflow for intra-articular joint fracture reduction using a robotic system. It is also shown how the various elements of the system are developed to explicitly address one or more of the requirements identified, and how intermediate verification tests are conducted to ensure conformity. Finally, a validation test in the form of a cadaveric trial confirms the ability of the designed system to satisfy the aims set by the original research question and the needs of the users.

34 CFR Appendix to Part 5 - Unknown Title

Code of Federal Regulations, 2010 CFR

2010-07-01

... the Department. Research protocol, design, processing, and other technical information to the extent... report submitted for comment prior to acceptance. Research protocol, design, processing, and other...-10) Pt. 5, App. Appendix to Part 5 [The following are some examples of specific records (or specific...

Development of Multi-slice Analytical Tool to Support BIM-based Design Process

NASA Astrophysics Data System (ADS)

Atmodiwirjo, P.; Johanes, M.; Yatmo, Y. A.

2017-03-01

This paper describes the on-going development of computational tool to analyse architecture and interior space based on multi-slice representation approach that is integrated with Building Information Modelling (BIM). Architecture and interior space is experienced as a dynamic entity, which have the spatial properties that might be variable from one part of space to another, therefore the representation of space through standard architectural drawings is sometimes not sufficient. The representation of space as a series of slices with certain properties in each slice becomes important, so that the different characteristics in each part of space could inform the design process. The analytical tool is developed for use as a stand-alone application that utilises the data exported from generic BIM modelling tool. The tool would be useful to assist design development process that applies BIM, particularly for the design of architecture and interior spaces that are experienced as continuous spaces. The tool allows the identification of how the spatial properties change dynamically throughout the space and allows the prediction of the potential design problems. Integrating the multi-slice analytical tool in BIM-based design process thereby could assist the architects to generate better design and to avoid unnecessary costs that are often caused by failure to identify problems during design development stages.

Modular space station, phase B extension. Information management advanced development. Volume 4: Data processing assembly

NASA Technical Reports Server (NTRS)

Gerber, C. R.

1972-01-01

The computation and logical functions which are performed by the data processing assembly of the modular space station are defined. The subjects discussed are: (1) requirements analysis, (2) baseline data processing assembly configuration, (3) information flow study, (4) throughput simulation, (5) redundancy study, (6) memory studies, and (7) design requirements specification.

PRA and Conceptual Design

NASA Technical Reports Server (NTRS)

DeMott, Diana; Fuqua, Bryan; Wilson, Paul

2013-01-01

Once a project obtains approval, decision makers have to consider a variety of alternative paths for completing the project and meeting the project objectives. How decisions are made involves a variety of elements including: cost, experience, current technology, ideologies, politics, future needs and desires, capabilities, manpower, timing, available information, and for many ventures management needs to assess the elements of risk versus reward. The use of high level Probabilistic Risk Assessment (PRA) Models during conceptual design phases provides management with additional information during the decision making process regarding the risk potential for proposed operations and design prototypes. The methodology can be used as a tool to: 1) allow trade studies to compare alternatives based on risk, 2) determine which elements (equipment, process or operational parameters) drives the risk, and 3) provide information to mitigate or eliminate risks early in the conceptual design to lower costs. Creating system models using conceptual design proposals and generic key systems based on what is known today can provide an understanding of the magnitudes of proposed systems and operational risks and facilitates trade study comparisons early in the decision making process. Identifying the "best" way to achieve the desired results is difficult, and generally occurs based on limited information. PRA provides a tool for decision makers to explore how some decisions will affect risk before the project is committed to that path, which can ultimately save time and money.

Design and development of a medical big data processing system based on Hadoop.

PubMed

Yao, Qin; Tian, Yu; Li, Peng-Fei; Tian, Li-Li; Qian, Yang-Ming; Li, Jing-Song

2015-03-01

Secondary use of medical big data is increasingly popular in healthcare services and clinical research. Understanding the logic behind medical big data demonstrates tendencies in hospital information technology and shows great significance for hospital information systems that are designing and expanding services. Big data has four characteristics--Volume, Variety, Velocity and Value (the 4 Vs)--that make traditional systems incapable of processing these data using standalones. Apache Hadoop MapReduce is a promising software framework for developing applications that process vast amounts of data in parallel with large clusters of commodity hardware in a reliable, fault-tolerant manner. With the Hadoop framework and MapReduce application program interface (API), we can more easily develop our own MapReduce applications to run on a Hadoop framework that can scale up from a single node to thousands of machines. This paper investigates a practical case of a Hadoop-based medical big data processing system. We developed this system to intelligently process medical big data and uncover some features of hospital information system user behaviors. This paper studies user behaviors regarding various data produced by different hospital information systems for daily work. In this paper, we also built a five-node Hadoop cluster to execute distributed MapReduce algorithms. Our distributed algorithms show promise in facilitating efficient data processing with medical big data in healthcare services and clinical research compared with single nodes. Additionally, with medical big data analytics, we can design our hospital information systems to be much more intelligent and easier to use by making personalized recommendations.

Applying the Ottawa Charter to inform health promotion programme design.

PubMed

Fry, Denise; Zask, Avigdor

2017-10-01

There is evidence of a correlation between adoption of the Ottawa Charter's framework of five action areas and health promotion programme effectiveness, but the Charter's framework has not been as fully implemented as hoped, nor is generally used by formal programme design models. In response, we aimed to translate the Charter's framework into a method to inform programme design. Our resulting design process uses detailed definitions of the Charter's action areas and evidence of predicted effectiveness to prompt greater consideration and use of the Charter's framework. We piloted the process by applying it to the design of four programmes of the Healthy Children's Initiative in New South Wales, Australia; refined the criteria via consensus; and made consensus decisions on the extent to which programme designs reflected the Charter's framework. The design process has broad potential applicability to health promotion programmes; facilitating greater use of the Ottawa Charter framework, which evidence indicates can increase programme effectiveness. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

The perceived value of using BIM for energy simulation

NASA Astrophysics Data System (ADS)

Lewis, Anderson M.

Building Information Modeling (BIM) is becoming an increasingly important tool in the Architectural, Engineering & Construction (AEC) industries. Some of the benefits associated with BIM include but are not limited to cost and time savings through greater trade and design coordination, and more accurate estimating take-offs. BIM is a virtual 3D, parametric design software that allows users to store information of a model within and can be used as a communication platform between project stakeholders. Likewise, energy simulation is an integral tool for predicting and optimizing a building's performance during design. Creating energy models and running energy simulations can be a time consuming activity due to the large number of parameters and assumptions that must be addressed to achieve reasonably accurate results. However, leveraging information imbedded within Building Information Models (BIMs) has the potential to increase accuracy and reduce the amount of time required to run energy simulations and can facilitate continuous energy simulations throughout the design process, thus optimizing building performance. Although some literature exists on how design stakeholders perceive the benefits associated with leveraging BIM for energy simulation, little is known about how perceptions associated with leveraging BIM for energy simulation differ between various green design stakeholder user groups. Through an e-survey instrument, this study seeks to determine how perceptions of using BIMs to inform energy simulation differ among distinct design stakeholder groups, which include BIM-only users, energy simulation-only users and BIM and energy simulation users. Additionally, this study seeks to determine what design stakeholders perceive as the main barriers and benefits of implementing BIM-based energy simulation. Results from this study suggest that little to no correlation exists between green design stakeholders' perceptions of the value associated with using information from BIMs to inform energy simulation and their engagement level with BIM and/or energy simulation. However, green design stakeholder perceptions of the value associated with using information from BIMs to inform energy simulation and their engagement with BIM and/or energy simulation may differ between different user groups (i.e. BIM users only, energy simulation users only, and BIM and energy simulation users). For example, the BIM-only user groups appeared to have a strong positive correlation between the perceptions of the value associated with using information from BIMs to inform energy simulation and their engagement with BIM. Additionally, this study suggests that the top perceived benefits of using BIMs to inform energy simulations among green design stakeholders are: facilitation of communication, reducing of process related costs, and giving users the ability examine more design options. The main perceived barrier of using BIMs to inform energy simulations among green design stakeholders was a lack of BIM standards for model integration with multidisciplinary teams. Results from this study will help readers understand how to better implement BIM-based energy simulation while mitigating barriers and optimizing benefits. Additionally, examining discrepancies between user groups can lead the identification and improvement of shortfalls in current BIM-based energy simulation processes. Understanding how perceptions and engagement levels differ among different software user groups will help in developing a strategies for implementing BIM-based energy simulation that are tailored to each specific user group.

Landauer in the Age of Synthetic Biology: Energy Consumption and Information Processing in Biochemical Networks

NASA Astrophysics Data System (ADS)

Mehta, Pankaj; Lang, Alex H.; Schwab, David J.

2016-03-01

A central goal of synthetic biology is to design sophisticated synthetic cellular circuits that can perform complex computations and information processing tasks in response to specific inputs. The tremendous advances in our ability to understand and manipulate cellular information processing networks raises several fundamental physics questions: How do the molecular components of cellular circuits exploit energy consumption to improve information processing? Can one utilize ideas from thermodynamics to improve the design of synthetic cellular circuits and modules? Here, we summarize recent theoretical work addressing these questions. Energy consumption in cellular circuits serves five basic purposes: (1) increasing specificity, (2) manipulating dynamics, (3) reducing variability, (4) amplifying signal, and (5) erasing memory. We demonstrate these ideas using several simple examples and discuss the implications of these theoretical ideas for the emerging field of synthetic biology. We conclude by discussing how it may be possible to overcome these limitations using "post-translational" synthetic biology that exploits reversible protein modification.

COINS: A composites information database system

NASA Technical Reports Server (NTRS)

Siddiqi, Shahid; Vosteen, Louis F.; Edlow, Ralph; Kwa, Teck-Seng

1992-01-01

An automated data abstraction form (ADAF) was developed to collect information on advanced fabrication processes and their related costs. The information will be collected for all components being fabricated as part of the ACT program and include in a COmposites INformation System (COINS) database. The aim of the COINS development effort is to provide future airframe preliminary design and fabrication teams with a tool through which production cost can become a deterministic variable in the design optimization process. The effort was initiated by the Structures Technology Program Office (STPO) of the NASA LaRC to implement the recommendations of a working group comprised of representatives from the commercial airframe companies. The principal working group recommendation was to re-institute collection of composite part fabrication data in a format similar to the DOD/NASA Structural Composites Fabrication Guide. The fabrication information collection form was automated with current user friendly computer technology. This work in progress paper describes the new automated form and features that make the form easy to use by an aircraft structural design-manufacturing team.

Bicycle Purchaser Training Workshop.

ERIC Educational Resources Information Center

Schwarz, William

A course was developed to provide data to buyers of new bicycles so they could make an informed decision about their purchases. The instructional systems design process (analysis, design, development, implementation, and evaluation) was used to analyze the need for a training course on buying and fitting a bicycle. Information was collected…

Design and Implementation of Demand Response Information Interactive Service Platform Based on “Internet Plus” Smart Energy

NASA Astrophysics Data System (ADS)

Cui, Gaoying; Fan, Jie; Qin, Yuchen; Wang, Dong; Chen, Guangyan

2017-05-01

In order to promote the effective use of demand response load side resources, promote the interaction between supply and demand, enhance the level of customer service and achieve the overall utilization of energy, this paper briefly explain the background significance of design demand response information platform and current situation of domestic and foreign development; Analyse the new demand of electricity demand response combined with the application of Internet and big data technology; Design demand response information platform architecture, construct demand responsive system, analyse process of demand response strategy formulate and intelligent execution implement; study application which combined with the big data, Internet and demand response technology; Finally, from information interaction architecture, control architecture and function design perspective design implementation of demand response information platform, illustrate the feasibility of the proposed platform design scheme implemented in a certain extent.

How to build an information gathering and processing system: lessons from naturally and artificially intelligent systems.

PubMed

Chappell, Jackie; Demery, Zoe P; Arriola-Rios, Veronica; Sloman, Aaron

2012-02-01

Imagine a situation in which you had to design a physical agent that could collect information from its environment, then store and process that information to help it respond appropriately to novel situations. What kinds of information should it attend to? How should the information be represented so as to allow efficient use and re-use? What kinds of constraints and trade-offs would there be? There are no unique answers. In this paper, we discuss some of the ways in which the need to be able to address problems of varying kinds and complexity can be met by different information processing systems. We also discuss different ways in which relevant information can be obtained, and how different kinds of information can be processed and used, by both biological organisms and artificial agents. We analyse several constraints and design features, and show how they relate both to biological organisms, and to lessons that can be learned from building artificial systems. Our standpoint overlaps with Karmiloff-Smith (1992) in that we assume that a collection of mechanisms geared to learning and developing in biological environments are available in forms that constrain, but do not determine, what can or will be learnt by individuals. Copyright © 2011 Elsevier B.V. All rights reserved.

[A medical consumable material management information system].

PubMed

Tang, Guoping; Hu, Liang

2014-05-01

Medical consumables material is essential supplies to carry out medical work, which has a wide range of varieties and a large amount of usage. How to manage it feasibly and efficiently that has been a topic of concern to everyone. This article discussed about how to design a medical consumable material management information system that has a set of standardized processes, bring together medical supplies administrator, suppliers and clinical departments. Advanced management mode, enterprise resource planning (ERP) applied to the whole system design process.

Waveform Design and Diversity for Advanced Space-Time Adaptive Processing and Multiple Input Multiple Output Systems

DTIC Science & Technology

2012-08-01

It suggests that a smart use of some a-priori information about the operating environment, when processing the received signal and designing the...random variable with the same variance of the backscattering target amplitude αT , and D ( αT , α G T ) is the Kullback − Leibler divergence, see [65...MI . Proof. See Appendix 3.6.6. Thus, we can use the optimization procedure of Algorithm 4 to optimize the Mutual Information between the target

ICT and mobile health to improve clinical process delivery. a research project for therapy management process innovation.

PubMed

Locatelli, Paolo; Montefusco, Vittorio; Sini, Elena; Restifo, Nicola; Facchini, Roberta; Torresani, Michele

2013-01-01

The volume and the complexity of clinical and administrative information make Information and Communication Technologies (ICTs) essential for running and innovating healthcare. This paper tells about a project aimed to design, develop and implement a set of organizational models, acknowledged procedures and ICT tools (Mobile & Wireless solutions and Automatic Identification and Data Capture technologies) to improve actual support, safety, reliability and traceability of a specific therapy management (stem cells). The value of the project is to design a solution based on mobile and identification technology in tight collaboration with physicians and actors involved in the process to ensure usability and effectivenes in process management.

Thermodynamic Studies for Drug Design and Screening

PubMed Central

Garbett, Nichola C.; Chaires, Jonathan B.

2012-01-01

Introduction A key part of drug design and development is the optimization of molecular interactions between an engineered drug candidate and its binding target. Thermodynamic characterization provides information about the balance of energetic forces driving binding interactions and is essential for understanding and optimizing molecular interactions. Areas covered This review discusses the information that can be obtained from thermodynamic measurements and how this can be applied to the drug development process. Current approaches for the measurement and optimization of thermodynamic parameters are presented, specifically higher throughput and calorimetric methods. Relevant literature for this review was identified in part by bibliographic searches for the period 2004 – 2011 using the Science Citation Index and PUBMED and the keywords listed below. Expert opinion The most effective drug design and development platform comes from an integrated process utilizing all available information from structural, thermodynamic and biological studies. Continuing evolution in our understanding of the energetic basis of molecular interactions and advances in thermodynamic methods for widespread application are essential to realize the goal of thermodynamically-driven drug design. Comprehensive thermodynamic evaluation is vital early in the drug development process to speed drug development towards an optimal energetic interaction profile while retaining good pharmacological properties. Practical thermodynamic approaches, such as enthalpic optimization, thermodynamic optimization plots and the enthalpic efficiency index, have now matured to provide proven utility in design process. Improved throughput in calorimetric methods remains essential for even greater integration of thermodynamics into drug design. PMID:22458502

Resolution of an Orbital Issue: A Designed Experiment

NASA Technical Reports Server (NTRS)

Huddleston, Lisa L.

2011-01-01

Design of Experiments (DOE) is a systematic approach to investigation of a system or process. A series of structured tests are designed in which planned changes are made to the input variables of a process or system. The effects of these changes on a pre-defined output are then assessed. DOE is a formal method of maximizing information gained while minimizing resources required.

CDC WONDER: a cooperative processing architecture for public health.

PubMed Central

Friede, A; Rosen, D H; Reid, J A

1994-01-01

CDC WONDER is an information management architecture designed for public health. It provides access to information and communications without the user's needing to know the location of data or communication pathways and mechanisms. CDC WONDER users have access to extractions from some 40 databases; electronic mail (e-mail); and surveillance data processing. System components include the Remote Client, the Communications Server, the Queue Managers, and Data Servers and Process Servers. The Remote Client software resides in the user's machine; other components are at the Centers for Disease Control and Prevention (CDC). The Remote Client, the Communications Server, and the Applications Server provide access to the information and functions in the Data Servers and Process Servers. The system architecture is based on cooperative processing, and components are coupled via pure message passing, using several protocols. This architecture allows flexibility in the choice of hardware and software. One system limitation is that final results from some subsystems are obtained slowly. Although designed for public health, CDC WONDER could be useful for other disciplines that need flexible, integrated information exchange. PMID:7719813

Process quality planning of quality function deployment for carrot syrup

NASA Astrophysics Data System (ADS)

Ekawati, Yurida; Noya, Sunday; Widjaja, Filemon

2017-06-01

Carrot products are rarely available in the market. Based on previous research that had been done using QFD to generate product design of carrots products, the research to produce the process quality planning had been carried out. The carrot product studied was carrot syrup. The research resulted in a process planning matrix for carrot syrup. The matrix gives information about critical process plan and the priority of the critical process plan. The critical process plan on the production process of carrot syrup consists of carrots sorting, carrots peeling, carrots washing, blanching process, carrots cutting, the making of pureed carrots, filtering carrot juice, the addition of sugar in carrot juice, the addition of food additives in carrot juice, syrup boiling, syrup filtering, syrup filling into the bottle, the bottle closure and cooling. The information will help the design of the production process of carrot syrup.

Integrating information literacy into an online undergraduate nursing informatics course: the librarian's role in the design and teaching of the course.

PubMed

Schulte, Stephanie J

2008-01-01

Integration of information literacy as a core component into a new online undergraduate nursing course proved to be a learning experience in course design and teaching. This article describes the framework for the course design that combined cultural competency, informatics, and information literacy and was grounded in informatics competencies for nurses at the beginning level, an informatics textbook, and the Neurnan Systems Model. The librarian's role in this process and the information literacy unit's content and written assignment are detailed, and challenges in the collaboration are also addressed.

Design of Student Information Management Database Application System for Office and Departmental Target Responsibility System

NASA Astrophysics Data System (ADS)

Zhou, Hui

It is the inevitable outcome of higher education reform to carry out office and departmental target responsibility system, in which statistical processing of student's information is an important part of student's performance review. On the basis of the analysis of the student's evaluation, the student information management database application system is designed by using relational database management system software in this paper. In order to implement the function of student information management, the functional requirement, overall structure, data sheets and fields, data sheet Association and software codes are designed in details.

An Exploratory Study of Cost Engineering in Axiomatic Design: Creation of the Cost Model Based on an FR-DP Map

NASA Technical Reports Server (NTRS)

Lee, Taesik; Jeziorek, Peter

2004-01-01

Large complex projects cost large sums of money throughout their life cycle for a variety of reasons and causes. For such large programs, the credible estimation of the project cost, a quick assessment of the cost of making changes, and the management of the project budget with effective cost reduction determine the viability of the project. Cost engineering that deals with these issues requires a rigorous method and systematic processes. This paper introduces a logical framework to a&e effective cost engineering. The framework is built upon Axiomatic Design process. The structure in the Axiomatic Design process provides a good foundation to closely tie engineering design and cost information together. The cost framework presented in this paper is a systematic link between the functional domain (FRs), physical domain (DPs), cost domain (CUs), and a task/process-based model. The FR-DP map relates a system s functional requirements to design solutions across all levels and branches of the decomposition hierarchy. DPs are mapped into CUs, which provides a means to estimate the cost of design solutions - DPs - from the cost of the physical entities in the system - CUs. The task/process model describes the iterative process ot-developing each of the CUs, and is used to estimate the cost of CUs. By linking the four domains, this framework provides a superior traceability from requirements to cost information.

Participatory Design, User Involvement and Health IT Evaluation.

PubMed

Kushniruk, Andre; Nøhr, Christian

2016-01-01

End user involvement and input into the design and evaluation of information systems has been recognized as being a critical success factor in the adoption of information systems. Nowhere is this need more critical than in the design of health information systems. Consistent with evidence from the general software engineering literature, the degree of user input into design of complex systems has been identified as one of the most important factors in the success or failure of complex information systems. The participatory approach goes beyond user-centered design and co-operative design approaches to include end users as more active participants in design ideas and decision making. Proponents of participatory approaches argue for greater end user participation in both design and evaluative processes. Evidence regarding the effectiveness of increased user involvement in design is explored in this contribution in the context of health IT. The contribution will discuss several approaches to including users in design and evaluation. Challenges in IT evaluation during participatory design will be described and explored along with several case studies.

What to Tell the Public? Information Design as Interpretation in Corridor Planning

ERIC Educational Resources Information Center

Lebeaux, Pamela M.

2012-01-01

Providing information to the public is a widely recognized function of planning. Yet little attention has been paid to how expert information is characterized for citizens participating in a planning process. The text, maps and images used to tell the story in a planning process can help to bridge the divide between experts and citizens, or act to…

Modelling health care processes for eliciting user requirements: a way to link a quality paradigm and clinical information system design.

PubMed

Staccini, P; Joubert, M; Quaranta, J F; Fieschi, D; Fieschi, M

2000-01-01

Hospital information systems have to support quality improvement objectives. The design issues of health care information system can be classified into three categories: 1) time-oriented and event-labelled storage of patient data; 2) contextual support of decision-making; 3) capabilities for modular upgrading. The elicitation of the requirements has to meet users' needs in relation to both the quality (efficacy, safety) and the monitoring of all health care activities (traceability). Information analysts need methods to conceptualize clinical information systems that provide actors with individual benefits and guide behavioural changes. A methodology is proposed to elicit and structure users' requirements using a process-oriented analysis, and it is applied to the field of blood transfusion. An object-oriented data model of a process has been defined in order to identify its main components: activity, sub-process, resources, constrains, guidelines, parameters and indicators. Although some aspects of activity, such as "where", "what else", and "why" are poorly represented by the data model alone, this method of requirement elicitation fits the dynamic of data input for the process to be traced. A hierarchical representation of hospital activities has to be found for this approach to be generalised within the organisation, for the processes to be interrelated, and for their characteristics to be shared.

Cognitive Processes Associated with Child Neglect

ERIC Educational Resources Information Center

Hildyard, Kathryn; Wolfe, David

2007-01-01

Objective: To compare neglectful and non-neglectful mothers on information processing tasks related to child emotions, behaviors, the caregiving relationship, and recall of child-related information. Method: A natural group design was used. Neglectful mothers (N = 34) were chosen from active, chronic caseloads; non-neglectful comparison mothers (N…

Evidence-Based Design and Research-Informed Design: What's the Difference? Conceptual Definitions and Comparative Analysis.

PubMed

Peavey, Erin; Vander Wyst, Kiley B

2017-10-01

This article provides critical examination and comparison of the conceptual meaning and underlying assumptions of the concepts evidence-based design (EBD) and research-informed design (RID) in order to facilitate practical use and theoretical development. In recent years, EBD has experienced broad adoption, yet it has been simultaneously critiqued for rigidity and misapplication. Many practitioners are gravitating to the term RID to describe their method of integrating knowledge into the design process. However, the term RID lacks a clear definition and the blurring of terms has the potential to weaken advances made integrating research into practice. Concept analysis methods from Walker and Avant were used to define the concepts for comparison. Conceptual definitions, process descriptions, examples (i.e., model cases), and methods of evaluation are offered for EBD and RID. Although EBD and RID share similarities in meaning, the two terms are distinct. When comparing evidence based (EB) and research informed, EB is a broad base of information types (evidence) that are narrowly applied (based), while the latter references a narrow slice of information (research) that is broadly applied (informed) to create an end product of design. Much of the confusion between the use of the concepts EBD and RID arises out of differing perspectives between the way practitioners and academics understand the underlying terms. The authors hope this article serves to generate thoughtful dialogue, which is essential to the development of a discipline, and look forward to the contribution of the readership.

Participatory Design of Mass Health Communication in Three Languages for Seniors and People With Disabilities on Medicaid

PubMed Central

Rothschild, Beccah; Graham, Carrie; Ivey, Susan L.; Konishi, Susana

2009-01-01

Objectives. We used participatory design methods to develop and test guidebooks about health care choices intended for 600 000 English-, Spanish-, and Chinese-speaking seniors and people with disabilities receiving Medicaid in California. Methods. Design and testing processes were conducted with consumers and professionals; they included 24 advisory group interviews, 36 usability tests, 18 focus groups (105 participants), 51 key informant interviews, guidebook readability and suitability testing, linguistic adaptation, and iterative revisions of 4 prototypes. Results. Participatory design processes identified preferences of intended audiences for guidebook content, linguistic adaptation, and format; guidebook readability was scored at the sixth- to eighth-grade level and suitability at 95%. These findings informed the design of a separate efficacy study that showed high guidebook usage and satisfaction, and better gains in knowledge, confidence, and intended behaviors among intervention participants than among control participants. Conclusions. Participatory design can be used effectively in mass communication to inform vulnerable audiences of health care choices. The techniques described can be adapted for a broad range of health communication interventions. PMID:19833990

Participatory design of mass health communication in three languages for seniors and people with disabilities on Medicaid.

PubMed

Neuhauser, Linda; Rothschild, Beccah; Graham, Carrie; Ivey, Susan L; Konishi, Susana

2009-12-01

We used participatory design methods to develop and test guidebooks about health care choices intended for 600 000 English-, Spanish-, and Chinese-speaking seniors and people with disabilities receiving Medicaid in California. Design and testing processes were conducted with consumers and professionals; they included 24 advisory group interviews, 36 usability tests, 18 focus groups (105 participants), 51 key informant interviews, guidebook readability and suitability testing, linguistic adaptation, and iterative revisions of 4 prototypes. Participatory design processes identified preferences of intended audiences for guidebook content, linguistic adaptation, and format; guidebook readability was scored at the sixth- to eighth-grade level and suitability at 95%. These findings informed the design of a separate efficacy study that showed high guidebook usage and satisfaction, and better gains in knowledge, confidence, and intended behaviors among intervention participants than among control participants. Participatory design can be used effectively in mass communication to inform vulnerable audiences of health care choices. The techniques described can be adapted for a broad range of health communication interventions.

The Methodology of Interactive Parametric Modelling of Construction Site Facilities in BIM Environment

NASA Astrophysics Data System (ADS)

Kozlovská, Mária; Čabala, Jozef; Struková, Zuzana

2014-11-01

Information technology is becoming a strong tool in different industries, including construction. The recent trend of buildings designing is leading up to creation of the most comprehensive virtual building model (Building Information Model) in order to solve all the problems relating to the project as early as in the designing phase. Building information modelling is a new way of approaching to the design of building projects documentation. Currently, the building site layout as a part of the building design documents has a very little support in the BIM environment. Recently, the research of designing the construction process conditions has centred on improvement of general practice in planning and on new approaches to construction site layout planning. The state of art in field of designing the construction process conditions indicated an unexplored problem related to connection of knowledge system with construction site facilities (CSF) layout through interactive modelling. The goal of the paper is to present the methodology for execution of 3D construction site facility allocation model (3D CSF-IAM), based on principles of parametric and interactive modelling.

Human Factors Considerations in System Design

NASA Technical Reports Server (NTRS)

Mitchell, C. M. (Editor); Vanbalen, P. M. (Editor); Moe, K. L. (Editor)

1983-01-01

Human factors considerations in systems design was examined. Human factors in automated command and control, in the efficiency of the human computer interface and system effectiveness are outlined. The following topics are discussed: human factors aspects of control room design; design of interactive systems; human computer dialogue, interaction tasks and techniques; guidelines on ergonomic aspects of control rooms and highly automated environments; system engineering for control by humans; conceptual models of information processing; information display and interaction in real time environments.

Letter processing and font information during reading: beyond distinctiveness, where vision meets design.

PubMed

Sanocki, Thomas; Dyson, Mary C

2012-01-01

Letter identification is a critical front end of the reading process. In general, conceptualizations of the identification process have emphasized arbitrary sets of distinctive features. However, a richer view of letter processing incorporates principles from the field of type design, including an emphasis on uniformities across letters within a font. The importance of uniformities is supported by a small body of research indicating that consistency of font increases letter identification efficiency. We review design concepts and the relevant literature, with the goal of stimulating further thinking about letter processing during reading.

Process-driven information management system at a biotech company: concept and implementation.

PubMed

Gobbi, Alberto; Funeriu, Sandra; Ioannou, John; Wang, Jinyi; Lee, Man-Ling; Palmer, Chris; Bamford, Bob; Hewitt, Robin

2004-01-01

While established pharmaceutical companies have chemical information systems in place to manage their compounds and the associated data, new startup companies need to implement these systems from scratch. Decisions made early in the design phase usually have long lasting effects on the expandability, maintenance effort, and costs associated with the information management system. Careful analysis of work and data flows, both inter- and intradepartmental, and identification of existing dependencies between activities are important. This knowledge is required to implement an information management system, which enables the research community to work efficiently by avoiding redundant registration and processing of data and by timely provision of the data whenever needed. This paper first presents the workflows existing at Anadys, then ARISE, the research information management system developed in-house at Anadys. ARISE was designed to support the preclinical drug discovery process and covers compound registration, analytical quality control, inventory management, high-throughput screening, lower throughput screening, and data reporting.

From user needs to system specifications: multi-disciplinary thematic seminars as a collaborative design method for development of health information systems.

PubMed

Scandurra, I; Hägglund, M; Koch, S

2008-08-01

This paper presents a new multi-disciplinary method for user needs analysis and requirements specification in the context of health information systems based on established theories from the fields of participatory design and computer supported cooperative work (CSCW). Whereas conventional methods imply a separate, sequential needs analysis for each profession, the "multi-disciplinary thematic seminar" (MdTS) method uses a collaborative design process. Application of the method in elderly homecare resulted in prototypes that were well adapted to the intended user groups. Vital information in the points of intersection between different care professions was elicited and a holistic view of the entire care process was obtained. Health informatics-usability specialists and clinical domain experts are necessary to apply the method. Although user needs acquisition can be time-consuming, MdTS was perceived to efficiently identify in-context user needs, and transformed these directly into requirements specifications. Consequently the method was perceived to expedite the entire ICT implementation process.

Scenario-based design: A method for connecting information system design with public health operations and emergency management

PubMed Central

Reeder, Blaine; Turner, Anne M

2011-01-01

Responding to public health emergencies requires rapid and accurate assessment of workforce availability under adverse and changing circumstances. However, public health information systems to support resource management during both routine and emergency operations are currently lacking. We applied scenario-based design as an approach to engage public health practitioners in the creation and validation of an information design to support routine and emergency public health activities. Methods: Using semi-structured interviews we identified the information needs and activities of senior public health managers of a large municipal health department during routine and emergency operations. Results: Interview analysis identified twenty-five information needs for public health operations management. The identified information needs were used in conjunction with scenario-based design to create twenty-five scenarios of use and a public health manager persona. Scenarios of use and persona were validated and modified based on follow-up surveys with study participants. Scenarios were used to test and gain feedback on a pilot information system. Conclusion: The method of scenario-based design was applied to represent the resource management needs of senior-level public health managers under routine and disaster settings. Scenario-based design can be a useful tool for engaging public health practitioners in the design process and to validate an information system design. PMID:21807120

Design and implementation of a status at a glance user interface for a power distribution expert system

NASA Technical Reports Server (NTRS)

Liberman, Eugene M.; Manner, David B.; Dolce, James L.; Mellor, Pamela A.

1993-01-01

Expert systems are widely used in health monitoring and fault detection applications. One of the key features of an expert system is that it possesses a large body of knowledge about the application for which it was designed. When the user consults this knowledge base, it is essential that the expert system's reasoning process and its conclusions be as concise as possible. If, in addition, an expert system is part of a process monitoring system, the expert system's conclusions must be combined with current events of the process. Under these circumstances, it is difficult for a user to absorb and respond to all the available information. For example, a user can become distracted and confused if two or more unrelated devices in different parts of the system require attention. A human interface designed to integrate expert system diagnoses with process data and to focus the user's attention to the important matters provides a solution to the 'information overload' problem. This paper will discuss a user interface to the power distribution expert system for Space Station Freedom. The importance of features which simplify assessing system status and which minimize navigating through layers of information will be discussed. Design rationale and implementation choices will also be presented.

Nurses' Experiences of an Initial and Reimplemented Electronic Health Record Use.

PubMed

Chang, Chi-Ping; Lee, Ting-Ting; Liu, Chia-Hui; Mills, Mary Etta

2016-04-01

The electronic health record is a key component of healthcare information systems. Currently, numerous hospitals have adopted electronic health records to replace paper-based records to document care processes and improve care quality. Integrating healthcare information system into traditional nursing daily operations requires time and effort for nurses to become familiarized with this new technology. In the stages of electronic health record implementation, smooth adoption can streamline clinical nursing activities. In order to explore the adoption process, a descriptive qualitative study design and focus group interviews were conducted 3 months after and 2 years after electronic health record system implementation (system aborted 1 year in between) in one hospital located in southern Taiwan. Content analysis was performed to analyze the interview data, and six main themes were derived, in the first stage: (1) liability, work stress, and anticipation for electronic health record; (2) slow network speed, user-unfriendly design for learning process; (3) insufficient information technology/organization support; on the second stage: (4) getting used to electronic health record and further system requirements, (5) benefits of electronic health record in time saving and documentation, (6) unrealistic information technology competence expectation and future use. It concluded that user-friendly design and support by informatics technology and manpower backup would facilitate this adoption process as well.

Launch vehicle systems design analysis

NASA Technical Reports Server (NTRS)

Ryan, Robert; Verderaime, V.

1993-01-01

Current launch vehicle design emphasis is on low life-cycle cost. This paper applies total quality management (TQM) principles to a conventional systems design analysis process to provide low-cost, high-reliability designs. Suggested TQM techniques include Steward's systems information flow matrix method, quality leverage principle, quality through robustness and function deployment, Pareto's principle, Pugh's selection and enhancement criteria, and other design process procedures. TQM quality performance at least-cost can be realized through competent concurrent engineering teams and brilliance of their technical leadership.

Hadoop-based implementation of processing medical diagnostic records for visual patient system

NASA Astrophysics Data System (ADS)

Yang, Yuanyuan; Shi, Liehang; Xie, Zhe; Zhang, Jianguo

2018-03-01

We have innovatively introduced Visual Patient (VP) concept and method visually to represent and index patient imaging diagnostic records (IDR) in last year SPIE Medical Imaging (SPIE MI 2017), which can enable a doctor to review a large amount of IDR of a patient in a limited appointed time slot. In this presentation, we presented a new approach to design data processing architecture of VP system (VPS) to acquire, process and store various kinds of IDR to build VP instance for each patient in hospital environment based on Hadoop distributed processing structure. We designed this system architecture called Medical Information Processing System (MIPS) with a combination of Hadoop batch processing architecture and Storm stream processing architecture. The MIPS implemented parallel processing of various kinds of clinical data with high efficiency, which come from disparate hospital information system such as PACS, RIS LIS and HIS.

Expanding the scope of health information systems. Challenges and developments.

PubMed

Kuhn, K A; Wurst, S H R; Bott, O J; Giuse, D A

2006-01-01

To identify current challenges and developments in health information systems. Reports on HIS, eHealth and process support were analyzed, core problems and challenges were identified. Health information systems are extending their scope towards regional networks and health IT infrastructures. Integration, interoperability and interaction design are still today's core problems. Additional problems arise through the integration of genetic information into the health care process. There are noticeable trends towards solutions for these problems.

Flexible Processing and the Design of Grammar

ERIC Educational Resources Information Center

Sag, Ivan A.; Wasow, Thomas

2015-01-01

We explore the consequences of letting the incremental and integrative nature of language processing inform the design of competence grammar. What emerges is a view of grammar as a system of local monotonic constraints that provide a direct characterization of the signs (the form-meaning correspondences) of a given language. This…

77 FR 31828 - Notice of Request for Extension of a Currently Approved Information Collection for the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-30

... equipment used in dairy, meat or poultry industries for evaluation regarding sanitary design and... Processed Dairy Products AGENCY: Agricultural Marketing Service, USDA. ACTION: Notice and request for... of Manufactured or Processed Dairy Products, and the Certification of Sanitary Design and Fabrication...

17 CFR 240.15d-15 - Controls and procedures.

Code of Federal Regulations, 2011 CFR

2011-04-01

... control framework that is established by a body or group that has followed due-process procedures..., without limitation, controls and procedures designed to ensure that information required to be disclosed... disclosure. (f) The term internal control over financial reporting is defined as a process designed by, or...

17 CFR 240.15d-15 - Controls and procedures.

Code of Federal Regulations, 2010 CFR

2010-04-01

... control framework that is established by a body or group that has followed due-process procedures..., without limitation, controls and procedures designed to ensure that information required to be disclosed... disclosure. (f) The term internal control over financial reporting is defined as a process designed by, or...

Schools Designed with Community Participation.

ERIC Educational Resources Information Center

Sanoff, Henry

This publication presents case studies of school buildings to demonstrate the application of a post occupancy evaluation (POE) during various stages of the design and planning process. It explains that because POE is a process for gathering information about a building in use, it can be applied effectively both to renovation and expansion projects…

Nontraditional Intersections/Interchanges: Informational Report

DOT National Transportation Integrated Search

2007-06-18

Comprehensive Coverage -Geometric design considerations. -Traffic analysis and comparison with similar conventional design. -Signal settings. -Signing and marking. -Material or cost comparison. -Selection Process in a spread sheet.

Particle Pollution Designations

EPA Pesticide Factsheets

This area provides information on the process EPA, the states, and the tribes follow to designate areas as attainment (meeting) or nonattainment (not meeting) the particle pollution air quality standards.

Sulfur Dioxide Designations

EPA Pesticide Factsheets

This area provides information on the process EPA, the states, and the tribes follow to designate areas as attainment (meeting) or nonattainment (not meeting) the sulfur dioxide air quality standards.

Designing a process for executing projects under an international agreement

NASA Technical Reports Server (NTRS)

Mohan, S. N.

2003-01-01

Projects executed under an international agreement require special arrangements in order to operate within confines of regulations issued by the State Department and the Commerce Department. In order to communicate enterprise-level guidance and procedural information uniformly to projects based on interpretations that carry the weight of institutional authority, a process was developed. This paper provides a script for designing processes in general, using this particular process for context. While the context is incidental, the method described is applicable to any process in general. The paper will expound on novel features utilized for dissemination of the procedural details over the Internet following such process design.

Mobile-Based Dictionary of Information and Communication Technology

NASA Astrophysics Data System (ADS)

Liando, O. E. S.; Mewengkang, A.; Kaseger, D.; Sangkop, F. I.; Rantung, V. P.; Rorimpandey, G. C.

2018-02-01

This study aims to design and build mobile-based dictionary of information and communication technology applications to provide access to information in the form of glossary of terms in the context of information and communication technologies. Applications built in this study using the Android platform, with SQLite database model. This research uses prototype model development method which covers the stages of communication, Quick Plan, Quick Design Modeling, Construction of Prototype, Deployment Delivery & Feedback, and Full System Transformation. The design of this application is designed in such a way as to facilitate the user in the process of learning and understanding the new terms or vocabularies encountered in the world of information and communication technology. Mobile-based dictionary of Information And Communication Technology applications that have been built can be an alternative to learning literature. In its simplest form, this application is able to meet the need for a comprehensive and accurate dictionary of Information And Communication Technology function.

Cooper Screening of Information Processing (C-SIP). Administrator's Manual.

ERIC Educational Resources Information Center

Cooper, Richard

This document is designed to assist individuals administering the Cooper Screening of Information Processing (C-SIP), which is intended as a diagnostic teaching tool that allows teachers or others to determine, in a conversational setting, whether a person manifests any common characteristics of learning problems. After a brief introduction, a…

Business Process Elicitation, Modeling, and Reengineering: Teaching and Learning with Simulated Environments

ERIC Educational Resources Information Center

Jeyaraj, Anand

2010-01-01

The design of enterprise information systems requires students to master technical skills for elicitation, modeling, and reengineering business processes as well as soft skills for information gathering and communication. These tacit skills and behaviors cannot be effectively taught students but rather experienced and learned by students. This…

Information theoretical assessment of visual communication with subband coding

NASA Astrophysics Data System (ADS)

Rahman, Zia-ur; Fales, Carl L.; Huck, Friedrich O.

1994-09-01

A well-designed visual communication channel is one which transmits the most information about a radiance field with the fewest artifacts. The role of image processing, encoding and restoration is to improve the quality of visual communication channels by minimizing the error in the transmitted data. Conventionally this role has been analyzed strictly in the digital domain neglecting the effects of image-gathering and image-display devices on the quality of the image. This results in the design of a visual communication channel which is `suboptimal.' We propose an end-to-end assessment of the imaging process which incorporates the influences of these devices in the design of the encoder and the restoration process. This assessment combines Shannon's communication theory with Wiener's restoration filter and with the critical design factors of the image gathering and display devices, thus providing the metrics needed to quantify and optimize the end-to-end performance of the visual communication channel. Results show that the design of the image-gathering device plays a significant role in determining the quality of the visual communication channel and in designing the analysis filters for subband encoding.

Business Process Design Method Based on Business Event Model for Enterprise Information System Integration

NASA Astrophysics Data System (ADS)

Kobayashi, Takashi; Komoda, Norihisa

The traditional business process design methods, in which the usecase is the most typical, have no useful framework to design the activity sequence with. Therefore, the design efficiency and quality vary widely according to the designer’s experience and skill. In this paper, to solve this problem, we propose the business events and their state transition model (a basic business event model) based on the language/action perspective, which is the result in the cognitive science domain. In the business process design, using this model, we decide event occurrence conditions so that every event synchronizes with each other. We also propose the design pattern to decide the event occurrence condition (a business event improvement strategy). Lastly, we apply the business process design method based on the business event model and the business event improvement strategy to the credit card issue process and estimate its effect.

MANTECH project book

NASA Astrophysics Data System (ADS)

The effective integration of processes, systems, and procedures used in the production of aerospace systems using computer technology is managed by the Integration Technology Division (MTI). Under its auspices are the Information Management Branch, which is actively involved with information management, information sciences and integration, and the Implementation Branch, whose technology areas include computer integrated manufacturing, engineering design, operations research, and material handling and assembly. The Integration Technology Division combines design, manufacturing, and supportability functions within the same organization. The Processing and Fabrication Division manages programs to improve structural and nonstructural materials processing and fabrication. Within this division, the Metals Branch directs the manufacturing methods program for metals and metal matrix composites processing and fabrication. The Nonmetals Branch directs the manufacturing methods programs, which include all manufacturing processes for producing and utilizing propellants, plastics, resins, fibers, composites, fluid elastomers, ceramics, glasses, and coatings. The objective of the Industrial Base Analysis Division is to act as focal point for the USAF industrial base program for productivity, responsiveness, and preparedness planning.

The effects of mild and severe traumatic brain injury on speed of information processing as measured by the computerized tests of information processing (CTIP).

PubMed

Tombaugh, Tom N; Rees, Laura; Stormer, Peter; Harrison, Allyson G; Smith, Andra

2007-01-01

In spite of the fact that reaction time (RT) measures are sensitive to the effects of traumatic brain injury (TBI), few RT procedures have been developed for use in standard clinical evaluations. The computerized test of information processing (CTIP) [Tombaugh, T. N., & Rees, L. (2000). Manual for the computerized tests of information processing (CTIP). Ottawa, Ont.: Carleton University] was designed to measure the degree to which TBI decreases the speed at which information is processed. The CTIP consists of three computerized programs that progressively increase the amount of information that is processed. Results of the current study demonstrated that RT increased as the difficulty of the CTIP tests increased (known as the complexity effect), and as severity of injury increased (from mild to severe TBI). The current study also demonstrated the importance of selecting a non-biased measure of variability. Overall, findings suggest that the CTIP is an easy to administer and sensitive measure of information processing speed.

Thinking graphically: Connecting vision and cognition during graph comprehension.

PubMed

Ratwani, Raj M; Trafton, J Gregory; Boehm-Davis, Deborah A

2008-03-01

Task analytic theories of graph comprehension account for the perceptual and conceptual processes required to extract specific information from graphs. Comparatively, the processes underlying information integration have received less attention. We propose a new framework for information integration that highlights visual integration and cognitive integration. During visual integration, pattern recognition processes are used to form visual clusters of information; these visual clusters are then used to reason about the graph during cognitive integration. In 3 experiments, the processes required to extract specific information and to integrate information were examined by collecting verbal protocol and eye movement data. Results supported the task analytic theories for specific information extraction and the processes of visual and cognitive integration for integrative questions. Further, the integrative processes scaled up as graph complexity increased, highlighting the importance of these processes for integration in more complex graphs. Finally, based on this framework, design principles to improve both visual and cognitive integration are described. PsycINFO Database Record (c) 2008 APA, all rights reserved

CAD/CAM interface design of excimer laser micro-processing system

NASA Astrophysics Data System (ADS)

Jing, Liang; Chen, Tao; Zuo, Tiechuan

2005-12-01

Recently CAD/CAM technology has been gradually used in the field of laser processing. The excimer laser micro-processing system just identified G instruction before CAD/CAM interface was designed. However the course of designing a part with G instruction for users is too hard. The efficiency is low and probability of making errors is high. By secondary development technology of AutoCAD with Visual Basic, an application was developed to pick-up each entity's information in graph and convert them to each entity's processing parameters. Also an additional function was added into former controlling software to identify these processing parameters of each entity and realize continue processing of graphic. Based on the above CAD/CAM interface, Users can design a part in AutoCAD instead of using G instruction. The period of designing a part is sharply shortened. This new way of design greatly guarantees the processing parameters of the part is right and exclusive. The processing of complex novel bio-chip has been realized by this new function.

An innovative nanophotonic information processing concept implementing cogent micro/nanosensors for space robotics

NASA Astrophysics Data System (ADS)

Santoli, Salvatore

2013-02-01

Cogent sensors, defined as sensors that are capable of performing the transformation of raw data into information, are shown to be of the essence for realization of the long sought-after autonomous robots for space applications. A strongly miniaturized integration of sensing and information processing systems is needed for cogent sensors designed for autonomous sensing—information processing (IP)—actuating behavior. It is shown that the recently developed field of quantum holography (QH), stemming from geometric quantization of any holographic processes through the Heisenberg Group (G) and deeply different, as stressed in detail, from other meanings of "quantum holography" in the literature, supplies the nanophotonic tools for designing and assembling an associative memory (AM) as the brain implementing such strong cogency. An AM is designed through a free-space interconnected large planar multilayer architecture of quantum well-based two-port neurons implementing a shift register on the manifold of G, and whose input consists of photonic holograms from high frequency pulsed microlasers in the infrared band of em or em-transduced outside signals. The optoelectronics as relative, integrated into a hybrid chip involving photonic detectors, microlasers and electronic components for the clock control system, would allow cycle times as short as 30 ns with the large spatial bandwidth available in photonics. IP through QH concerns the encoding and decoding of holographic interference patterns, not of mere binary digital logical (syntactic) information. Accordingly, QH defines on the G's manifold an IP paradigm where information as experimental knowledge is processed; i.e., IP concerns both syntax and semantics. It is shown that such QH-neural brain would cogently deal with spurious signals as random noise that would be caused to die out on the way to the intended target through parallel massive and real-time IP.

Conceptual design of industrial process displays.

PubMed

Pedersen, C R; Lind, M

1999-11-01

Today, process displays used in industry are often designed on the basis of piping and instrumentation diagrams without any method of ensuring that the needs of the operators are fulfilled. Therefore, a method for a systematic approach to the design of process displays is needed. This paper discusses aspects of process display design taking into account both the designer's and the operator's points of view. Three aspects are emphasized: the operator tasks, the display content and the display form. The distinction between these three aspects is the basis for proposing an outline for a display design method that matches the industrial practice of modular plant design and satisfies the needs of reusability of display design solutions. The main considerations in display design in the industry are to specify the operator's activities in detail, to extract the information the operators need from the plant design specification and documentation, and finally to present this information. The form of the display is selected from existing standardized display elements such as trend curves, mimic diagrams, ecological interfaces, etc. Further knowledge is required to invent new display elements. That is, knowledge about basic visual means of presenting information and how humans perceive and interpret these means and combinations. This knowledge is required in the systematic selection of graphical items for a given display content. The industrial part of the method is first illustrated in the paper by a simple example from a plant with batch processes. Later the method is applied to develop a supervisory display for a condenser system in a nuclear power plant. The differences between the continuous plant domain of power production and the batch processes from the example are analysed and broad categories of display types are proposed. The problems involved in specification and invention of a supervisory display are analysed and conclusions from these problems are made. It is concluded that the design method proposed provides a framework for the progress of the display design and is useful in pin-pointing the actual problems. The method was useful in reducing the number of existing displays that could fulfil the requirements of the supervision task. The method provided at the same time a framework for dealing with the problems involved in inventing new displays based on structured analysis. However the problems in a systematic approach to display invention still need consideration.

Long-term care information systems: an overview of the selection process.

PubMed

Nahm, Eun-Shim; Mills, Mary Etta; Feege, Barbara

2006-06-01

Under the current Medicare Prospective Payment System method and the ever-changing managed care environment, the long-term care information system is vital to providing quality care and to surviving in business. system selection process should be an interdisciplinary effort involving all necessary stakeholders for the proposed system. The system selection process can be modeled following the Systems Developmental Life Cycle: identifying problems, opportunities, and objectives; determining information requirements; analyzing system needs; designing the recommended system; and developing and documenting software.

Visualisation and interaction design solutions to address specific demands in shared home care.

PubMed

Scandurra, Isabella; Hägglund, Maria; Koch, Sabine

2006-01-01

When care professionals from different organisations are involved in patient care, their different views on the care process may not be meaningfully integrated. To use visualisation and interaction design solutions addressing the specific demands of shared care in order to support a collaborative work process. Participatory design, comprising interdisciplinary seminar series with real users and iterative prototyping, was applied. A set of interaction and visualisation design solutions to address care professionals' requirements in shared home care is presented, introducing support for identifying origin of information, holistic presentation of information, user group specific visualisation, avoiding cognitive overload, coordination of work and planning, and quick overviews. The design solutions are implemented in an integrated virtual health record system supporting cooperation and coordination in shared home care for the elderly. The described requirements are, however, generalized to comprise all shared care work. The presented design considerations allow healthcare professionals in different organizations to share patient data on mobile devices. Visualization and interaction design facilitates specific work situations and assists in handling specific demands in shared care. The user interface is adapted to different user groups with similar yet distinct needs. Consequently different views supporting cooperative work and presenting shared information in holistic overviews are developed.

Virtual Construction of Space Habitats: Connecting Building Information Models (BIM) and SysML

NASA Technical Reports Server (NTRS)

Polit-Casillas, Raul; Howe, A. Scott

2013-01-01

Current trends in design, construction and management of complex projects make use of Building Information Models (BIM) connecting different types of data to geometrical models. This information model allow different types of analysis beyond pure graphical representations. Space habitats, regardless their size, are also complex systems that require the synchronization of many types of information and disciplines beyond mass, volume, power or other basic volumetric parameters. For this, the state-of-the-art model based systems engineering languages and processes - for instance SysML - represent a solid way to tackle this problem from a programmatic point of view. Nevertheless integrating this with a powerful geometrical architectural design tool with BIM capabilities could represent a change in the workflow and paradigm of space habitats design applicable to other aerospace complex systems. This paper shows some general findings and overall conclusions based on the ongoing research to create a design protocol and method that practically connects a systems engineering approach with a BIM architectural and engineering design as a complete Model Based Engineering approach. Therefore, one hypothetical example is created and followed during the design process. In order to make it possible this research also tackles the application of IFC categories and parameters in the aerospace field starting with the application upon the space habitats design as way to understand the information flow between disciplines and tools. By building virtual space habitats we can potentially improve in the near future the way more complex designs are developed from very little detail from concept to manufacturing.

Methods for Improving Information from ’Undesigned’ Human Factors Experiments.

DTIC Science & Technology

Human factors engineering, Information processing, Regression analysis , Experimental design, Least squares method, Analysis of variance, Correlation techniques, Matrices(Mathematics), Multiple disciplines, Mathematical prediction

Application of Design of Experiments and Surrogate Modeling within the NASA Advanced Concepts Office, Earth-to-Orbit Design Process

NASA Technical Reports Server (NTRS)

Zwack, Matthew R.; Dees, Patrick D.; Holt, James B.

2016-01-01

Decisions made during early conceptual design can have a profound impact on life-cycle cost (LCC). Widely accepted that nearly 80% of LCC is committed. Decisions made during early design must be well informed. Advanced Concepts Office (ACO) at Marshall Space Flight Center aids in decision making for launch vehicles. Provides rapid turnaround pre-phase A and phase A studies. Provides customer with preliminary vehicle sizing information, vehicle feasibility, and expected performance.

An Educational Technology Curriculum for Converging Technologies.

ERIC Educational Resources Information Center

Allen, Brockenbrough S.; And Others

1989-01-01

Outlines curriculum reforms being made in the master's level educational technology program at San Diego State University. Topics discussed include technological changes and the roles of educational product designers; human information processing; knowledge base design; student design of educational adventure games; interactive video design; and…

A HUMAN FACTORS ENGINEERING PROCESS TO SUPPORT HUMAN-SYSTEM INTERFACE DESIGN IN CONTROL ROOM MODERNIZATION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kovesdi, C.; Joe, J.; Boring, R.

The primary objective of the United States (U.S.) Department of Energy (DOE) Light Water Reactor Sustainability (LWRS) program is to sustain operation of the existing commercial nuclear power plants (NPPs) through a multi-pathway approach in conducting research and development (R&D). The Advanced Instrumentation, Information, and Control (II&C) System Technologies pathway conducts targeted R&D to address aging and reliability concerns with legacy instrumentation and control (I&C) and other information systems in existing U.S. NPPs. Control room modernization is an important part following this pathway, and human factors experts at Idaho National Laboratory (INL) have been involved in conducting R&D to supportmore » migration of new digital main control room (MCR) technologies from legacy analog and legacy digital I&C. This paper describes a human factors engineering (HFE) process that supports human-system interface (HSI) design in MCR modernization activities, particularly with migration of old digital to new digital I&C. The process described in this work is an expansion from the LWRS Report INL/EXT-16-38576, and is a requirements-driven approach that aligns with NUREG-0711 requirements. The work described builds upon the existing literature by adding more detail around key tasks and decisions to make when transitioning from HSI Design into Verification and Validation (V&V). The overall objective of this process is to inform HSI design and elicit specific, measurable, and achievable human factors criteria for new digital technologies. Upon following this process, utilities should have greater confidence with transitioning from HSI design into V&V.« less

Informing the Uninformed: Optimizing the Consent Message Using a Fractional Factorial Design

PubMed Central

Tait, Alan R.; Voepel-Lewis, Terri; Nair, Vijayan N.; Narisetty, Naveen N.; Fagerlin, Angela

2013-01-01

Objective Research information should be presented in a manner that promotes understanding. However, many parents and research subjects have difficulty understanding and making informed decisions. This study was designed to examine the effect of different communication strategies on parental understanding of research information. Participants 640 parents of children scheduled for elective surgery Design Observational study using a fractional factorial design Setting Large tertiary care children's hospital Interventions Parents were randomized to receive information about a hypothetical pain trial presented in one of 16 consent documents containing different combinations of 5 selected communication strategies (i.e., length, readability, processability [formatting], graphical display, and supplemental verbal disclosure). Main outcome measures Parents were interviewed to determine their understanding of the study elements (e.g., protocol, alternatives etc.) and their gist (main point) and verbatim (actual) understanding of the risks and benefits. Results Main effects for understanding were found for processability, readability, message length, use of graphics, and verbal discussion. Consent documents with high processability, 8th grade reading level, and graphics resulted in significantly greater gist and verbatim understanding compared with forms without these attributes (mean difference, 95% CI = 0.57, 0.26–0.88, correct responses out of 7 and 0.54, 0.20–0.88 correct responses out of 4 for gist and verbatim, respectively). Conclusions Results identified several communication strategy combinations that improved parents' understanding of research information. Adoption of these active strategies by investigators, clinicians, IRBs, and study sponsors represents a simple, practical, and inexpensive means to optimize the consent message and enhance parental, participant, and patient understanding. PMID:23700028

The intelligent user interface for NASA's advanced information management systems

NASA Technical Reports Server (NTRS)

Campbell, William J.; Short, Nicholas, Jr.; Rolofs, Larry H.; Wattawa, Scott L.

1987-01-01

NASA has initiated the Intelligent Data Management Project to design and develop advanced information management systems. The project's primary goal is to formulate, design and develop advanced information systems that are capable of supporting the agency's future space research and operational information management needs. The first effort of the project was the development of a prototype Intelligent User Interface to an operational scientific database, using expert systems and natural language processing technologies. An overview of Intelligent User Interface formulation and development is given.

Research 1970/1971: Annual Progress Report.

ERIC Educational Resources Information Center

Georgia Inst. of Tech., Atlanta. Science Information Research Center.

The report presents a summary of science information research activities of the School of Information and Computer Science, Georgia Institute of Technology. Included are project reports on interrelated studies in science information, information processing and systems design, automata and systems theories, and semiotics and linguistics. Also…

Information-processing differences and laterality of students from different colleges and disciplines.

PubMed

Monfort, M; Martin, S A; Frederickson, W

1990-02-01

1023 college students were assessed for hemispheric brain dominance using the paper-and-pencil test, the Human Information Processing Survey. Analysis of scores of students majoring in Advertising, Interior Design, Music, Journalism, Art, Oral Communication, and Architecture suggested a preference for right-brain hemispheric processing, while scores of students majoring in Accounting, Management, Finance, Computer Science, Mathematics, Nursing, Funeral Service, Criminal Justice, and Elementary Education suggested a preference for left-hemispheric strategies for processing information. The differential effects of hemispheric processing in an educational system emphasizing the left-hemispheric activities of structured logic and sequential processing suggests repression of the intellectual development of those students who may be genetically favorable to right-hemispheric processing.

Management of CAD/CAM information: Key to improved manufacturing productivity

NASA Technical Reports Server (NTRS)

Fulton, R. E.; Brainin, J.

1984-01-01

A key element to improved industry productivity is effective management of CAD/CAM information. To stimulate advancements in this area, a joint NASA/Navy/industry project designated Intergrated Programs for Aerospace-Vehicle Design (IPAD) is underway with the goal of raising aerospace industry productivity through advancement of technology to integrate and manage information involved in the design and manufacturing process. The project complements traditional NASA/DOD research to develop aerospace design technology and the Air Force's Integrated Computer-Aided Manufacturing (ICAM) program to advance CAM technology. IPAD research is guided by an Industry Technical Advisory Board (ITAB) composed of over 100 representatives from aerospace and computer companies.

Processes in construction of failure management expert systems from device design information

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Lance, Nick

1987-01-01

This paper analyzes the tasks and problem solving methods used by an engineer in constructing a failure management expert system from design information about the device to te diagnosed. An expert test engineer developed a trouble-shooting expert system based on device design information and experience with similar devices, rather than on specific expert knowledge gained from operating the device or troubleshooting its failures. The construction of the expert system was intensively observed and analyzed. This paper characterizes the knowledge, tasks, methods, and design decisions involved in constructing this type of expert system, and makes recommendations concerning tools for aiding and automating construction of such systems.

Cyber-Informed Engineering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, Robert S.; Benjamin, Jacob; Wright, Virginia L.

A continuing challenge for engineers who utilize digital systems is to understand the impact of cyber-attacks across the entire product and program lifecycle. This is a challenge due to the evolving nature of cyber threats that may impact the design, development, deployment, and operational phases of all systems. Cyber Informed Engineering is the process by which engineers are made aware of both how to use their engineering knowledge to positively impact the cyber security in the processes by which they architect and design components and the services and security of the components themselves.

Study on the supply chain of an enterprise based on axiomatic design

NASA Astrophysics Data System (ADS)

Fan, Shu-hai; Lin, Chao-qun; Ji, Chun; Zhou, Ce; Chen, Peng

2018-06-01

This paper first expounds the basic theoretical knowledge of axiomatic design, and then designs and improves the enterprise supply chain through two design axioms (axiom of independence and information axiom). In the axiomatic design of the axiom of independence, the user needs to determine the needs and problems to be solved, to determine the top total goals, the total goal decomposition, and to determine their own design equations. In the application of information axiom, the concept of cloud is used to quantify the amount of information, and the two schemes are evaluated and compared. Finally, through axiomatic design, we can get the best solution for the improvement of supply chain design. Axiomatic design is a generic, systematic and sophisticated approach to design that addresses the needs of different customers. Using this method to improve the level of supply chain management is creative. As a mature method, it will make the process efficient and convenient.

The use of writing assignments to help students synthesize content in upper-level undergraduate biology courses.

PubMed

Sparks-Thissen, Rebecca L

2017-02-01

Biology education is undergoing a transformation toward a more student-centered, inquiry-driven classroom. Many educators have designed engaging assignments that are designed to help undergraduate students gain exposure to the scientific process and data analysis. One of these types of assignments is use of a grant proposal assignment. Many instructors have used these assignments in lecture-based courses to help students process information in the literature and apply that information to a novel problem such as design of an antiviral drug or a vaccine. These assignments have been helpful in engaging students in the scientific process in the absence of an inquiry-driven laboratory. This commentary discusses the application of these grant proposal writing assignments to undergraduate biology courses. © FEMS 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Implementing Information and Communication Technology to Support Community Aged Care Service Integration: Lessons from an Australian Aged Care Provider.

PubMed

Douglas, Heather E; Georgiou, Andrew; Tariq, Amina; Prgomet, Mirela; Warland, Andrew; Armour, Pauline; Westbrook, Johanna I

2017-04-10

There is limited evidence of the benefits of information and communication technology (ICT) to support integrated aged care services. We undertook a case study to describe carelink+, a centralised client service management ICT system implemented by a large aged and community care service provider, Uniting. We sought to explicate the care-related information exchange processes associated with carelink+ and identify lessons for organisations attempting to use ICT to support service integration. Our case study included seventeen interviews and eleven observation sessions with a purposive sample of staff within the organisation. Inductive analysis was used to develop a model of ICT-supported information exchange. Management staff described the integrated care model designed to underpin carelink+. Frontline staff described complex information exchange processes supporting coordination of client services. Mismatches between the data quality and the functions carelink+ was designed to support necessitated the evolution of new work processes associated with the system. There is value in explicitly modelling the work processes that emerge as a consequence of ICT. Continuous evaluation of the match between ICT and work processes will help aged care organisations to achieve higher levels of ICT maturity that support their efforts to provide integrated care to clients.

Implementing Information and Communication Technology to Support Community Aged Care Service Integration: Lessons from an Australian Aged Care Provider

PubMed Central

Georgiou, Andrew; Tariq, Amina; Prgomet, Mirela; Warland, Andrew; Armour, Pauline; Westbrook, Johanna I

2017-01-01

Introduction: There is limited evidence of the benefits of information and communication technology (ICT) to support integrated aged care services. Objectives: We undertook a case study to describe carelink+, a centralised client service management ICT system implemented by a large aged and community care service provider, Uniting. We sought to explicate the care-related information exchange processes associated with carelink+ and identify lessons for organisations attempting to use ICT to support service integration. Methods: Our case study included seventeen interviews and eleven observation sessions with a purposive sample of staff within the organisation. Inductive analysis was used to develop a model of ICT-supported information exchange. Results: Management staff described the integrated care model designed to underpin carelink+. Frontline staff described complex information exchange processes supporting coordination of client services. Mismatches between the data quality and the functions carelink+ was designed to support necessitated the evolution of new work processes associated with the system. Conclusions: There is value in explicitly modelling the work processes that emerge as a consequence of ICT. Continuous evaluation of the match between ICT and work processes will help aged care organisations to achieve higher levels of ICT maturity that support their efforts to provide integrated care to clients. PMID:29042851

Efficiency improvement of technological preparation of power equipment manufacturing

NASA Astrophysics Data System (ADS)

Milukov, I. A.; Rogalev, A. N.; Sokolov, V. P.; Shevchenko, I. V.

2017-11-01

Competitiveness of power equipment primarily depends on speeding-up the development and mastering of new equipment samples and technologies, enhancement of organisation and management of design, manufacturing and operation. Actual political, technological and economic conditions cause the acute need in changing the strategy and tactics of process planning. At that the issues of maintenance of equipment with simultaneous improvement of its efficiency and compatibility to domestically produced components are considering. In order to solve these problems, using the systems of computer-aided process planning for process design at all stages of power equipment life cycle is economically viable. Computer-aided process planning is developed for the purpose of improvement of process planning by using mathematical methods and optimisation of design and management processes on the basis of CALS technologies, which allows for simultaneous process design, process planning organisation and management based on mathematical and physical modelling of interrelated design objects and production system. An integration of computer-aided systems providing the interaction of informative and material processes at all stages of product life cycle is proposed as effective solution to the challenges in new equipment design and process planning.

What can paper-based clinical information systems tell us about the design of computerized clinical information systems (CIS) in the ICU?

PubMed

Miller, A; Pilcher, D; Mercaldo, N; Leong, T; Scheinkestel, C; Schildcrout, J

2010-08-01

Screen designs in computerized clinical information systems (CIS) have been modeled on their paper predecessors. However, limited understanding about how paper forms support clinical work means that we risk repeating old mistakes and creating new opportunities for error and inefficiency as illustrated by problems associated with computerized provider order entry systems. This study was designed to elucidate principles underlying a successful ICU paper-based CIS. The research was guided by two exploratory hypotheses: (1) paper-based artefacts (charts, notes, equipment, order forms) are used differently by nurses, doctors and other healthcare professionals in different (formal and informal) conversation contexts and (2) different artefacts support different decision processes that are distributed across role-based conversations. All conversations undertaken at the bedsides of five patients were recorded with any supporting artefacts for five days per patient. Data was coded according to conversational role-holders, clinical decision process, conversational context and artefacts. 2133 data points were analyzed using Poisson logistic regression analyses. Results show significant interactions between artefacts used during different professional conversations in different contexts (chi(2)((df=16))=55.8, p<0.0001). The interaction between artefacts used during different professional conversations for different clinical decision processes was not statistically significant although all two-way interactions were statistically significant. Paper-based CIS have evolved to support complex interdisciplinary decision processes. The translation of two design principles - support interdisciplinary perspectives and integrate decision processes - from paper to computerized CIS may minimize the risks associated with computerization. 2010 Australian College of Critical Care Nurses Ltd. Published by Elsevier Ltd. All rights reserved.

Low NO sub x heavy fuel combustor concept program

NASA Technical Reports Server (NTRS)

Russell, P.; Beal, G.; Hinton, B.

1981-01-01

A gas turbine technology program to improve and optimize the staged rich lean low NOx combustor concept is described. Subscale combustor tests to develop the design information for optimization of the fuel preparation, rich burn, quick air quench, and lean burn steps of the combustion process were run. The program provides information for the design of high pressure full scale gas turbine combustors capable of providing environmentally clean combustion of minimally of minimally processed and synthetic fuels. It is concluded that liquid fuel atomization and mixing, rich zone stoichiometry, rich zone liner cooling, rich zone residence time, and quench zone stoichiometry are important considerations in the design and scale up of the rich lean combustor.

Information security of Smart Factories

NASA Astrophysics Data System (ADS)

Iureva, R. A.; Andreev, Y. S.; Iuvshin, A. M.; Timko, A. S.

2018-05-01

In several years, technologies and systems based on the Internet of things (IoT) will be widely used in all smart factories. When processing a huge array of unstructured data, their filtration and adequate interpretation are a priority for enterprises. In this context, the correct representation of information in a user-friendly form acquires special importance, for which the market today presents advanced analytical platforms designed to collect, store and analyze data on technological processes and events in real time. The main idea of the paper is the statement of the information security problem in IoT and integrity of processed information.

Cognitive Process as a Basis for Intelligent Retrieval Systems Design.

ERIC Educational Resources Information Center

Chen, Hsinchun; Dhar, Vasant

1991-01-01

Two studies of the cognitive processes involved in online document-based information retrieval were conducted. These studies led to the development of five computational models of online document retrieval which were incorporated into the design of an "intelligent" document-based retrieval system. Both the system and the broader implications of…

Designing a Flood-Risk Education Program in the Netherlands

ERIC Educational Resources Information Center

Bosschaart, Adwin; van der Schee, Joop; Kuiper, Wilmad

2016-01-01

This study focused on designing a flood-risk education program to enhance 15-year-old students' flood-risk perception. In the flood-risk education program, learning processes were modeled in such a way that the arousal of moderate levels of fear should prompt experiential and analytical information processing. In this way, understanding of flood…

Lights, Camera, Action: Facilitating the Design and Production of Effective Instructional Videos

ERIC Educational Resources Information Center

Di Paolo, Terry; Wakefield, Jenny S.; Mills, Leila A.; Baker, Laura

2017-01-01

This paper outlines a rudimentary process intended to guide faculty in K-12 and higher education through the steps involved to produce video for their classes. The process comprises four steps: planning, development, delivery and reflection. Each step is infused with instructional design information intended to support the collaboration between…

ON DEVELOPING TOOLS AND METHODS FOR ENVIRONMENTALLY BENIGN PROCESSES

EPA Science Inventory

Two types of tools are generally needed for designing processes and products that are cleaner from environmental impact perspectives. The first kind is called process tools. Process tools are based on information obtained from experimental investigations in chemistry., material s...

Guided magnonic Michelson interferometer

PubMed Central

Ahmed, Muhammad H.; Jeske, Jan; Greentree, Andrew D.

2017-01-01

Magnonics is an emerging field with potential applications in classical and quantum information processing. Freely propagating magnons in two-dimensional media are subject to dispersion, which limits their effective range and utility as information carriers. We show the design of a confining magnonic waveguide created by two surface current carrying wires placed above a spin-sheet, which can be used as a primitive for reconfigurable magnonic circuitry. We theoretically demonstrate the ability of such guides to counter the transverse dispersion of the magnon in a spin-sheet, thus extending the range of the magnon. A design of a magnonic directional coupler and controllable Michelson interferometer is shown, demonstrating its utility for information processing tasks. PMID:28134271

Designing an over-the-counter consumer decision-making tool for older adults.

PubMed

Martin-Hammond, Aqueasha M; Abegaz, Tamirat; Gilbert, Juan E

2015-10-01

Older adults are at increased risk of adverse drug events due to medication. Older adults tend to take more medication and are at higher risk of chronic illness. Over-the-counter (OTC) medication does not require healthcare provider oversight and understanding OTC information is heavily dependent on a consumer's ability to understand and use the medication appropriately. Coupling health technology with effective communication is one approach to address the challenge of communicating health and improving health related tasks. However, the success of many health technologies also depends on how well the technology is designed and how well it addresses users needs. This is especially true for the older adult population. This paper describes (1) a formative study performed to understand how to design novel health technology to assist older adults with OTC medication information, and (2) how a user-centered design process helped to refine the initial assumptions of user needs and help to conceptualize the technology. An iterative design process was used. The process included two brainstorming and review sessions with human-computer interaction researchers and design sessions with older adults in the form of semi-structured interviews. Methods and principles of user-centered research and design were used to inform the research design. Two researchers with expertise in human-computer interaction performed expert reviews of early system prototypes. After initial prototypes were developed, seven older adults were engaged in semi-structured interviews to understand usability concerns and features and functionality older adults may find useful for selecting appropriate OTC medication. Eight usability concerns were discovered and addressed in the two rounds of expert review, and nine additional usability concerns were discovered in design sessions with older adults. Five themes emerged from the interview transcripts as recommendations for design. These recommendations represent opportunities for technology such as the one described in this paper to support older adults in the OTC decision-making process. This paper illustrates the use of an iterative user-centered process in the formative stages of design and its usefulness for understanding aspects of the technology design that are useful to older adults when making decisions about OTC medication. The technology support mechanisms included in the initial model were revised based on the results from the iterative design sessions and helped to refine and conceptualize the system being designed. Copyright © 2015 Elsevier Inc. All rights reserved.

Using a logical information model-driven design process in healthcare.

PubMed

Cheong, Yu Chye; Bird, Linda; Tun, Nwe Ni; Brooks, Colleen

2011-01-01

A hybrid standards-based approach has been adopted in Singapore to develop a Logical Information Model (LIM) for healthcare information exchange. The Singapore LIM uses a combination of international standards, including ISO13606-1 (a reference model for electronic health record communication), ISO21090 (healthcare datatypes), SNOMED CT (healthcare terminology) and HL7 v2 (healthcare messaging). This logic-based design approach also incorporates mechanisms for achieving bi-directional semantic interoperability.

An Examination of Cognitive Processing of Multimedia Information Based on Viewers' Eye Movements

ERIC Educational Resources Information Center

Liu, Han-Chin; Chuang, Hsueh-Hua

2011-01-01

This study utilized qualitative and quantitative designs and eye-tracking technology to understand how viewers process multimedia information. Eye movement data were collected from eight college students (non-science majors) while they were viewing web pages containing different types of text and illustrations depicting the mechanism of…

NIST: Information Management in the AMRF

NASA Technical Reports Server (NTRS)

Callaghan, George (Editor)

1991-01-01

The information management strategies developed for the NIST Automated Manufacturing Research Facility (AMRF) - a prototype small batch manufacturing facility used for integration and measurement related standards research are outlined in this video. The five major manufacturing functions - design, process planning, off-line programming, shop floor control, and materials processing are explained and their applications demonstrated.

Pre-Service Teachers' Material Development Process Based on the ADDIE Model: E-Book Design

ERIC Educational Resources Information Center

Usta, Necla Dönmez; Güntepe, Ebru Turan

2017-01-01

With the developments in information and communication technologies, books which are fundamental information sources for students throughout their education and training process are being transformed into electronic book (e-book) formats. E-books provide interactive environments, and they are also updateable materials, which shows that, in time,…

Multimedia Learning System and Its Effect on Self-Efficacy in Database Modeling and Design: An Exploratory Study

ERIC Educational Resources Information Center

Cheung, Waiman; Li, Eldon Y.; Yee, Lester W.

2003-01-01

Metadatabase modeling and design integrate process modeling and data modeling methodologies. Both are core topics in the information technology (IT) curriculum. Learning these topics has been an important pedagogical issue to the core studies for management information systems (MIS) and computer science (CSc) students. Unfortunately, the learning…

New York State Educational Information System (NYSEIS) Systems Design. Volume I, Phase II. Final Report.

ERIC Educational Resources Information Center

Price Waterhouse and Co., New York, NY.

This volume on Phase II of the New York State Educational Information System (NYSEIS) describes the Gross Systems Analysis and Design, which includes the general flow diagram and processing chart for each of the student, personnel, and financial subsystems. Volume II, Functional Specifications, includes input/output requirements and file…

Collaborating with Youth to Inform and Develop Tools for Psychotropic Decision Making

PubMed Central

Murphy, Andrea; Gardner, David; Kutcher, Stan; Davidson, Simon; Manion, Ian

2010-01-01

Introduction: Youth oriented and informed resources designed to support psychopharmacotherapeutic decision-making are essentially unavailable. This article outlines the approach taken to design such resources, the product that resulted from the approach taken, and the lessons learned from the process. Methods: A project team with psychopharmacology expertise was assembled. The project team reviewed best practices regarding medication educational materials and related tools to support decisions. Collaboration with key stakeholders who were thought of as primary end-users and target groups occurred. A graphic designer and a plain language consultant were also retained. Results: Through an iterative and collaborative process over approximately 6 months, Med Ed and Med Ed Passport were developed. Literature and input from key stakeholders, in particular youth, was instrumental to the development of the tools and materials within Med Ed. A training program utilizing a train-the-trainer model was developed to facilitate the implementation of Med Ed in Ontario, which is currently ongoing. Conclusion: An evidence-informed process that includes youth and key stakeholder engagement is required for developing tools to support in psychopharmacotherapeutic decision-making. The development process fostered an environment of reciprocity between the project team and key stakeholders. PMID:21037916

A situation-response model for intelligent pilot aiding

NASA Technical Reports Server (NTRS)

Schudy, Robert; Corker, Kevin

1987-01-01

An intelligent pilot aiding system needs models of the pilot information processing to provide the computational basis for successful cooperation between the pilot and the aiding system. By combining artificial intelligence concepts with the human information processing model of Rasmussen, an abstraction hierarchy of states of knowledge, processing functions, and shortcuts are developed, which is useful for characterizing the information processing both of the pilot and of the aiding system. This approach is used in the conceptual design of a real time intelligent aiding system for flight crews of transport aircraft. One promising result was the tentative identification of a particular class of information processing shortcuts, from situation characterizations to appropriate responses, as the most important reliable pathway for dealing with complex time critical situations.

An Interdisciplinary Approach for Understanding Information Utilization in Engineering and Product Design

ERIC Educational Resources Information Center

Bi, Youyi

2017-01-01

Human-centered design requires thorough understanding of people (e.g. customers, designers, engineers) in order to better satisfy the needs and expectations of all stakeholders in the design process. Designers are able to create better products by incorporating customers' subjective evaluations on products. Engineers can also build better tools…

Scenario-based design: a method for connecting information system design with public health operations and emergency management.

PubMed

Reeder, Blaine; Turner, Anne M

2011-12-01

Responding to public health emergencies requires rapid and accurate assessment of workforce availability under adverse and changing circumstances. However, public health information systems to support resource management during both routine and emergency operations are currently lacking. We applied scenario-based design as an approach to engage public health practitioners in the creation and validation of an information design to support routine and emergency public health activities. Using semi-structured interviews we identified the information needs and activities of senior public health managers of a large municipal health department during routine and emergency operations. Interview analysis identified 25 information needs for public health operations management. The identified information needs were used in conjunction with scenario-based design to create 25 scenarios of use and a public health manager persona. Scenarios of use and persona were validated and modified based on follow-up surveys with study participants. Scenarios were used to test and gain feedback on a pilot information system. The method of scenario-based design was applied to represent the resource management needs of senior-level public health managers under routine and disaster settings. Scenario-based design can be a useful tool for engaging public health practitioners in the design process and to validate an information system design. Copyright © 2011 Elsevier Inc. All rights reserved.

Evidence-based patient information about treatment of multiple sclerosis--a phase one study on comprehension and emotional responses.

PubMed

Kasper, Jürgen; Köpke, Sascha; Mühlhauser, Ingrid; Heesen, Christoph

2006-07-01

This study analysis the comprehension and emotional responses of people suffering from multiple sclerosis when provided with an evidence-based information module. It is a core module of a comprehensive decision aid about immunotherapy. The core module is designed to enable patients to process scientific uncertainty without adverse effects. It considers existing standards for risk communication and presentation of data. Using a mailing approach we investigated 169 patients with differing courses of disease in a before-after design. Items addressed the competence in processing relative and absolute risk information and patients' emotional response to the tool, comprising grade of familiarity with the information, understanding, relevance, emotional arousal, and certainty. Overall, numeracy improved (p < 0.001), although 99 of 169 patients did not complete the numeracy task correctly. Understanding depended on the relevance related to the course of disease. A moderate level of uncertainty was induced. No adverse emotional responses could be shown, neither in those who did comprehend the information, nor in those who did not develop numeracy skills. In conclusion, the tool supports people suffering from multiple sclerosis to process evidence-based medical information and scientific uncertainty without burdening them emotionally. This study is an example for the documentation of an important step in the development process of a complex intervention.

Layout Design of Human-Machine Interaction Interface of Cabin Based on Cognitive Ergonomics and GA-ACA.

PubMed

Deng, Li; Wang, Guohua; Yu, Suihuai

2016-01-01

In order to consider the psychological cognitive characteristics affecting operating comfort and realize the automatic layout design, cognitive ergonomics and GA-ACA (genetic algorithm and ant colony algorithm) were introduced into the layout design of human-machine interaction interface. First, from the perspective of cognitive psychology, according to the information processing process, the cognitive model of human-machine interaction interface was established. Then, the human cognitive characteristics were analyzed, and the layout principles of human-machine interaction interface were summarized as the constraints in layout design. Again, the expression form of fitness function, pheromone, and heuristic information for the layout optimization of cabin was studied. The layout design model of human-machine interaction interface was established based on GA-ACA. At last, a layout design system was developed based on this model. For validation, the human-machine interaction interface layout design of drilling rig control room was taken as an example, and the optimization result showed the feasibility and effectiveness of the proposed method.

Layout Design of Human-Machine Interaction Interface of Cabin Based on Cognitive Ergonomics and GA-ACA

PubMed Central

Deng, Li; Wang, Guohua; Yu, Suihuai

2016-01-01

In order to consider the psychological cognitive characteristics affecting operating comfort and realize the automatic layout design, cognitive ergonomics and GA-ACA (genetic algorithm and ant colony algorithm) were introduced into the layout design of human-machine interaction interface. First, from the perspective of cognitive psychology, according to the information processing process, the cognitive model of human-machine interaction interface was established. Then, the human cognitive characteristics were analyzed, and the layout principles of human-machine interaction interface were summarized as the constraints in layout design. Again, the expression form of fitness function, pheromone, and heuristic information for the layout optimization of cabin was studied. The layout design model of human-machine interaction interface was established based on GA-ACA. At last, a layout design system was developed based on this model. For validation, the human-machine interaction interface layout design of drilling rig control room was taken as an example, and the optimization result showed the feasibility and effectiveness of the proposed method. PMID:26884745

Integration of mask and silicon metrology in DFM

NASA Astrophysics Data System (ADS)

Matsuoka, Ryoichi; Mito, Hiroaki; Sugiyama, Akiyuki; Toyoda, Yasutaka

2009-03-01

We have developed a highly integrated method of mask and silicon metrology. The method adopts a metrology management system based on DBM (Design Based Metrology). This is the high accurate contouring created by an edge detection algorithm used in mask CD-SEM and silicon CD-SEM. We have inspected the high accuracy, stability and reproducibility in the experiments of integration. The accuracy is comparable with that of the mask and silicon CD-SEM metrology. In this report, we introduce the experimental results and the application. As shrinkage of design rule for semiconductor device advances, OPC (Optical Proximity Correction) goes aggressively dense in RET (Resolution Enhancement Technology). However, from the view point of DFM (Design for Manufacturability), the cost of data process for advanced MDP (Mask Data Preparation) and mask producing is a problem. Such trade-off between RET and mask producing is a big issue in semiconductor market especially in mask business. Seeing silicon device production process, information sharing is not completely organized between design section and production section. Design data created with OPC and MDP should be linked to process control on production. But design data and process control data are optimized independently. Thus, we provided a solution of DFM: advanced integration of mask metrology and silicon metrology. The system we propose here is composed of followings. 1) Design based recipe creation: Specify patterns on the design data for metrology. This step is fully automated since they are interfaced with hot spot coordinate information detected by various verification methods. 2) Design based image acquisition: Acquire the images of mask and silicon automatically by a recipe based on the pattern design of CD-SEM.It is a robust automated step because a wide range of design data is used for the image acquisition. 3) Contour profiling and GDS data generation: An image profiling process is applied to the acquired image based on the profiling method of the field proven CD metrology algorithm. The detected edges are then converted to GDSII format, which is a standard format for a design data, and utilized for various DFM systems such as simulation. Namely, by integrating pattern shapes of mask and silicon formed during a manufacturing process into GDSII format, it makes it possible to bridge highly accurate pattern profile information over to the design field of various EDA systems. These are fully integrated into design data and automated. Bi-directional cross probing between mask data and process control data is allowed by linking them. This method is a solution for total optimization that covers Design, MDP, mask production and silicon device producing. This method therefore is regarded as a strategic DFM approach in the semiconductor metrology.

The eyes have it: Using eye tracking to inform information processing strategies in multi-attributes choices.

PubMed

Ryan, Mandy; Krucien, Nicolas; Hermens, Frouke

2018-04-01

Although choice experiments (CEs) are widely applied in economics to study choice behaviour, understanding of how individuals process attribute information remains limited. We show how eye-tracking methods can provide insight into how decisions are made. Participants completed a CE, while their eye movements were recorded. Results show that although the information presented guided participants' decisions, there were also several processing biases at work. Evidence was found of (a) top-to-bottom, (b) left-to-right, and (c) first-to-last order biases. Experimental factors-whether attributes are defined as "best" or "worst," choice task complexity, and attribute ordering-also influence information processing. How individuals visually process attribute information was shown to be related to their choices. Implications for the design and analysis of CEs and future research are discussed. Copyright © 2017 John Wiley & Sons, Ltd.

Information Integration for Concurrent Engineering (IICE) IDEF3 Process Description Capture Method Report

DTIC Science & Technology

1992-05-01

methodology, knowledge acquisition, 140 requirements definition, information systems, information engineering, 16. PRICE CODE systems engineering...and knowledge resources. Like manpower, materials, and machines, information and knowledge assets are recognized as vital resources that can be...evolve towards an information -integrated enterprise. These technologies are designed to leverage information and knowledge resources as the key

Natural Resource Information System. Volume 1: Overall description

NASA Technical Reports Server (NTRS)

1972-01-01

A prototype computer-based Natural Resource Information System was designed which could store, process, and display data of maximum usefulness to land management decision making. The system includes graphic input and display, the use of remote sensing as a data source, and it is useful at multiple management levels. A survey established current decision making processes and functions, information requirements, and data collection and processing procedures. The applications of remote sensing data and processing requirements were established. Processing software was constructed and a data base established using high-altitude imagery and map coverage of selected areas of SE Arizona. Finally a demonstration of system processing functions was conducted utilizing material from the data base.

Manufactured Product Design and Planning. Curriculum Guide for Technology Education.

ERIC Educational Resources Information Center

Joyner, Jerry E.

This curriculum for a 1-semester or 1-year course in product design and planning contains information about the following topics: creativity, idea production techniques, problem solving, design fundamentals, design requirements, graphic communication, materials and processes, and safety. Course content is organized around the laboratory activities…

Integrating Data Sources for Process Sustainability Assessments (presentation)

EPA Science Inventory

To perform a chemical process sustainability assessment requires significant data about chemicals, process design specifications, and operating conditions. The required information includes the identity of the chemicals used, the quantities of the chemicals within the context of ...

Advanced information processing system

NASA Technical Reports Server (NTRS)

Lala, J. H.

1984-01-01

Design and performance details of the advanced information processing system (AIPS) for fault and damage tolerant data processing on aircraft and spacecraft are presented. AIPS comprises several computers distributed throughout the vehicle and linked by a damage tolerant data bus. Most I/O functions are available to all the computers, which run in a TDMA mode. Each computer performs separate specific tasks in normal operation and assumes other tasks in degraded modes. Redundant software assures that all fault monitoring, logging and reporting are automated, together with control functions. Redundant duplex links and damage-spread limitation provide the fault tolerance. Details of an advanced design of a laboratory-scale proof-of-concept system are described, including functional operations.

Head-Up; An interdisciplinary, participatory and co-design process informing the development of a novel head and neck support for people living with progressive neck muscle weakness.

PubMed

Reed, Heath; Langley, Joe; Stanton, Andy; Heron, Nicola; Clarke, Zoe; Judge, Simon; McCarthy, Avril; Squire, Gill; Quinn, Ann; Wells, Oliver; Tindale, Wendy; Baxter, Susan; Shaw, Pamela J; McDermott, Christopher J

2014-01-01

This paper presents the Head-Up project, that aims to provide innovative head support to help improve posture, relieve pain and aid communication for people living with progressive neck muscle weakness. The initial focus is motor neurone disease. The case study illustrates collaborative, interdisciplinary research and new product development underpinned by participatory design. The study was initiated by a 2-day stakeholder workshop followed by early proof-of-concept modelling and patient need evidence building. The work subsequently led to a successful NIHR i4i application funding a 24-month iterative design process, patenting, CE marking and clinical evaluation. The evaluation has informed amendments to the proposed design refered to here as the Sheffield Support Snood (SSS). The outcome positively demonstrates use and performance improvements over current neck orthoses and the process of multidisciplinary and user engagement has created a sense of ownership by MND participants, who have since acted as advocates for the product.

Sequence information signal processor for local and global string comparisons

DOEpatents

Peterson, John C.; Chow, Edward T.; Waterman, Michael S.; Hunkapillar, Timothy J.

1997-01-01

A sequence information signal processing integrated circuit chip designed to perform high speed calculation of a dynamic programming algorithm based upon the algorithm defined by Waterman and Smith. The signal processing chip of the present invention is designed to be a building block of a linear systolic array, the performance of which can be increased by connecting additional sequence information signal processing chips to the array. The chip provides a high speed, low cost linear array processor that can locate highly similar global sequences or segments thereof such as contiguous subsequences from two different DNA or protein sequences. The chip is implemented in a preferred embodiment using CMOS VLSI technology to provide the equivalent of about 400,000 transistors or 100,000 gates. Each chip provides 16 processing elements, and is designed to provide 16 bit, two's compliment operation for maximum score precision of between -32,768 and +32,767. It is designed to provide a comparison between sequences as long as 4,194,304 elements without external software and between sequences of unlimited numbers of elements with the aid of external software. Each sequence can be assigned different deletion and insertion weight functions. Each processor is provided with a similarity measure device which is independently variable. Thus, each processor can contribute to maximum value score calculation using a different similarity measure.

Lost in the crowd? Using eye-tracking to investigate the effect of complexity on attribute non-attendance in discrete choice experiments.

PubMed

Spinks, Jean; Mortimer, Duncan

2016-02-03

The provision of additional information is often assumed to improve consumption decisions, allowing consumers to more accurately weigh the costs and benefits of alternatives. However, increasing the complexity of decision problems may prompt changes in information processing. This is particularly relevant for experimental methods such as discrete choice experiments (DCEs) where the researcher can manipulate the complexity of the decision problem. The primary aims of this study are (i) to test whether consumers actually process additional information in an already complex decision problem, and (ii) consider the implications of any such 'complexity-driven' changes in information processing for design and analysis of DCEs. A discrete choice experiment (DCE) is used to simulate a complex decision problem; here, the choice between complementary and conventional medicine for different health conditions. Eye-tracking technology is used to capture the number of times and the duration that a participant looks at any part of a computer screen during completion of DCE choice sets. From this we can analyse what has become known in the DCE literature as 'attribute non-attendance' (ANA). Using data from 32 participants, we model the likelihood of ANA as a function of choice set complexity and respondent characteristics using fixed and random effects models to account for repeated choice set completion. We also model whether participants are consistent with regard to which characteristics (attributes) they consider across choice sets. We find that complexity is the strongest predictor of ANA when other possible influences, such as time pressure, ordering effects, survey specific effects and socio-demographic variables (including proxies for prior experience with the decision problem) are considered. We also find that most participants do not apply a consistent information processing strategy across choice sets. Eye-tracking technology shows promise as a way of obtaining additional information from consumer research, improving DCE design, and informing the design of policy measures. With regards to DCE design, results from the present study suggest that eye-tracking data can identify the point at which adding complexity (and realism) to DCE choice scenarios becomes self-defeating due to unacceptable increases in ANA. Eye-tracking data therefore has clear application in the construction of guidelines for DCE design and during piloting of DCE choice scenarios. With regards to design of policy measures such as labelling requirements for CAM and conventional medicines, the provision of additional information has the potential to make difficult decisions even harder and may not have the desired effect on decision-making.

75 FR 67975 - Agency Information Collection Request; 30-Day Public Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-04

... Information Request Form. The Civil Rights Information Request Form is designed to collect data from health... of the Medicare certification process, health care facilities must receive a civil rights clearance... regulations. The civil rights information is requested only when a health care provider applies for Medicare...

Radiology information system: a workflow-based approach.

PubMed

Zhang, Jinyan; Lu, Xudong; Nie, Hongchao; Huang, Zhengxing; van der Aalst, W M P

2009-09-01

Introducing workflow management technology in healthcare seems to be prospective in dealing with the problem that the current healthcare Information Systems cannot provide sufficient support for the process management, although several challenges still exist. The purpose of this paper is to study the method of developing workflow-based information system in radiology department as a use case. First, a workflow model of typical radiology process was established. Second, based on the model, the system could be designed and implemented as a group of loosely coupled components. Each component corresponded to one task in the process and could be assembled by the workflow management system. The legacy systems could be taken as special components, which also corresponded to the tasks and were integrated through transferring non-work- flow-aware interfaces to the standard ones. Finally, a workflow dashboard was designed and implemented to provide an integral view of radiology processes. The workflow-based Radiology Information System was deployed in the radiology department of Zhejiang Chinese Medicine Hospital in China. The results showed that it could be adjusted flexibly in response to the needs of changing process, and enhance the process management in the department. It can also provide a more workflow-aware integration method, comparing with other methods such as IHE-based ones. The workflow-based approach is a new method of developing radiology information system with more flexibility, more functionalities of process management and more workflow-aware integration. The work of this paper is an initial endeavor for introducing workflow management technology in healthcare.

A Principled Approach to the Specification of System Architectures for Space Missions

NASA Technical Reports Server (NTRS)

McKelvin, Mark L. Jr.; Castillo, Robert; Bonanne, Kevin; Bonnici, Michael; Cox, Brian; Gibson, Corrina; Leon, Juan P.; Gomez-Mustafa, Jose; Jimenez, Alejandro; Madni, Azad

2015-01-01

Modern space systems are increasing in complexity and scale at an unprecedented pace. Consequently, innovative methods, processes, and tools are needed to cope with the increasing complexity of architecting these systems. A key systems challenge in practice is the ability to scale processes, methods, and tools used to architect complex space systems. Traditionally, the process for specifying space system architectures has largely relied on capturing the system architecture in informal descriptions that are often embedded within loosely coupled design documents and domain expertise. Such informal descriptions often lead to misunderstandings between design teams, ambiguous specifications, difficulty in maintaining consistency as the architecture evolves throughout the system development life cycle, and costly design iterations. Therefore, traditional methods are becoming increasingly inefficient to cope with ever-increasing system complexity. We apply the principles of component-based design and platform-based design to the development of the system architecture for a practical space system to demonstrate feasibility of our approach using SysML. Our results show that we are able to apply a systematic design method to manage system complexity, thus enabling effective data management, semantic coherence and traceability across different levels of abstraction in the design chain. Just as important, our approach enables interoperability among heterogeneous tools in a concurrent engineering model based design environment.

An investigation into creative design methodologies for textiles and fashion

NASA Astrophysics Data System (ADS)

Gault, Alison

2017-10-01

Understanding market intelligence, trends, influences and personal approaches are essential tools for design students to develop their ideas in textiles and fashion. Identifying different personal approaches including, visual, process-led or concept by employing creative methodologies are key to developing a brief. A series of ideas or themes start to emerge and through the design process serve to underpin and inform an entire collection. These investigations ensure that the design collections are able to produce a diverse range of outcomes. Following key structures and coherent stages in the design process creates authentic collections in textiles and fashion. A range of undergraduate students presented their design portfolios (180) and the methodologies employed were mapped against success at module level, industry response and graduate employment.

Incorporating Learning Analytics in the Classroom

ERIC Educational Resources Information Center

Thille, Candace; Zimmaro, Dawn

2017-01-01

This chapter describes an open learning analytics system focused on learning process measures and designed to engage instructors and students in an evidence-informed decision-making process to improve learning.

Methodology for Designing Operational Banking Risks Monitoring System

NASA Astrophysics Data System (ADS)

Kostjunina, T. N.

2018-05-01

The research looks at principles of designing an information system for monitoring operational banking risks. A proposed design methodology enables one to automate processes of collecting data on information security incidents in the banking network, serving as the basis for an integrated approach to the creation of an operational risk management system. The system can operate remotely ensuring tracking and forecasting of various operational events in the bank network. A structure of a content management system is described.

Information theory-based decision support system for integrated design of multivariable hydrometric networks

NASA Astrophysics Data System (ADS)

Keum, Jongho; Coulibaly, Paulin

2017-07-01

Adequate and accurate hydrologic information from optimal hydrometric networks is an essential part of effective water resources management. Although the key hydrologic processes in the water cycle are interconnected, hydrometric networks (e.g., streamflow, precipitation, groundwater level) have been routinely designed individually. A decision support framework is proposed for integrated design of multivariable hydrometric networks. The proposed method is applied to design optimal precipitation and streamflow networks simultaneously. The epsilon-dominance hierarchical Bayesian optimization algorithm was combined with Shannon entropy of information theory to design and evaluate hydrometric networks. Specifically, the joint entropy from the combined networks was maximized to provide the most information, and the total correlation was minimized to reduce redundant information. To further optimize the efficiency between the networks, they were designed by maximizing the conditional entropy of the streamflow network given the information of the precipitation network. Compared to the traditional individual variable design approach, the integrated multivariable design method was able to determine more efficient optimal networks by avoiding the redundant stations. Additionally, four quantization cases were compared to evaluate their effects on the entropy calculations and the determination of the optimal networks. The evaluation results indicate that the quantization methods should be selected after careful consideration for each design problem since the station rankings and the optimal networks can change accordingly.

The process of co-creating the interface for VENSTER, an interactive artwork for nursing home residents with dementia.

PubMed

Jamin, Gaston; Luyten, Tom; Delsing, Rob; Braun, Susy

2017-10-17

Interactive art installations might engage nursing home residents with dementia. The main aim of this article was to describe the challenging design process of an interactive artwork for nursing home residents, in co-creation with all stakeholders and to share the used methods and lessons learned. This process is illustrated by the design of the interface of VENSTER as a case. Nursing home residents from the psychogeriatric ward, informal caregivers, client representatives, health care professionals and members of the management team were involved in the design process, which consisted of three phases: (1) identify requirements, (2) develop a prototype and (3) conduct usability tests. Several methods were used (e.g. guided co-creation sessions, "Wizard of Oz"). Each phase generated "lessons learned", which were used as the departure point of the next phase. Participants hardly paid attention to the installation and interface. There, however, seemed to be an untapped potential for creating an immersive experience by focussing more on the content itself as an interface (e.g. creating specific scenes with cues for interaction, scenes based on existing knowledge or prior experiences). "Fifteen lessons learned" which can potentially assist the design of an interactive artwork for nursing home residents suffering from dementia were derived from the design process. This description provides tools and best practices for stakeholders to make (better) informed choices during the creation of interactive artworks. It also illustrates how co-design can make the difference between designing a pleasurable experience and a meaningful one. Implications for rehabilitation Co-design with all stakeholders can make the difference between designing a pleasurable experience and a meaningful one. There seems to be an untapped potential for creating an immersive experience by focussing more on the content itself as an interface (e.g. creating specific scenes with cues for interaction, scenes based on existing knowledge or prior experiences). Content as an interface proved to be a crucial part of the overall user experience. The case-study provides tools and best practices (15 "lessons learned") for stakeholders to make (better) informed choices during the creation of interactive artworks.

Advanced medical imaging protocol workflow-a flexible electronic solution to optimize process efficiency, care quality and patient safety in the National VA Enterprise.

PubMed

Medverd, Jonathan R; Cross, Nathan M; Font, Frank; Casertano, Andrew

2013-08-01

Radiologists routinely make decisions with only limited information when assigning protocol instructions for the performance of advanced medical imaging examinations. Opportunity exists to simultaneously improve the safety, quality and efficiency of this workflow through the application of an electronic solution leveraging health system resources to provide concise, tailored information and decision support in real-time. Such a system has been developed using an open source, open standards design for use within the Veterans Health Administration. The Radiology Protocol Tool Recorder (RAPTOR) project identified key process attributes as well as inherent weaknesses of paper processes and electronic emulators of paper processes to guide the development of its optimized electronic solution. The design provides a kernel that can be expanded to create an integrated radiology environment. RAPTOR has implications relevant to the greater health care community, and serves as a case model for modernization of legacy government health information systems.

30 CFR 250.1910 - What safety and environmental information is required?

Code of Federal Regulations, 2011 CFR

2011-07-01

... information including, as appropriate, a simplified process flow diagram and acceptable upper and lower limits, where applicable, for items such as temperature, pressure, flow and composition; and (3) mechanical design information including, as appropriate, piping and instrument diagrams; electrical area...

21 CFR 830.320 - Submission of unique device identification information.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Identification Database § 830.320 Submission of unique device identification information. (a) Designation of... Unique Device Identification Database (GUDID) in a format that we can process, review, and archive...

Triangulating System Requirements for Users with Severe Motor Disabilities

ERIC Educational Resources Information Center

Randolph, Adriane B.

2012-01-01

By giving a voice to users in the design process of information systems, they often feel more empowered and engaged. The inclusion of users with disabilities in the design process, however, can be markedly more difficult. User profiling allows a user's preferences and interests to be captured and represented. However, for a user with severe motor…

Personality, Resilience, Self-Regulation and Cognitive Ability Relevant to Teacher Selection

ERIC Educational Resources Information Center

Sautelle, Eleanor; Bowles, Terry; Hattie, John; Arifin, Daniel N.

2015-01-01

The current study uses social judgment theory to inform the design of processes to be used in selecting teachers for training programs. Developing a comprehensive selection process to identify individuals who are likely to succeed as teachers is a mechanism for improving teacher quality and raising the profile of the profession. The design of such…

Reliability of the Nursing Home Survey Process: A Simultaneous Survey Approach

ERIC Educational Resources Information Center

Lee, Robert H.; Gajewski, Byron J.; Thompson, Sarah

2006-01-01

Purpose: We designed this study to examine the reliability of the nursing home survey process in the state of Kansas using regular and simultaneous survey teams. In particular, the study examined how two survey teams exposed to the same information at the same time differed in their interpretations. Design and Methods: The protocol for…

Know your fibers : process and properties, or, a material science approach to designing pulp molded products

Treesearch

John F. Hunt

1998-01-01

The following results are preliminary, but show some basic information that will be used in an attempt to model pulp molded structures so that by measuring several basic fundamental properties of a fiber furnish and specifying process conditions, a molded structure could be designed for a particular performance need.

Command & Control in Virtual Environments: Laboratory Experimentation to Compare Virtual with Physical

DTIC Science & Technology

2010-06-01

Markus, 1994). Media richness theory rests on the assumption that organizations process information to reduce uncertainty and equivocality ( Daft ... Organization Design ), 554-571. Daft , R. L., & Macintosh, N. B. (1981). A tentative exploration into the amount and equivocality of information... design and customization. For instance, recent research demonstrates further how the performance of both Hierarchy and Edge organizations is

Construction of a Learning Environment Supporting Learners' Reflection: A Case of Information Seeking on the Web

ERIC Educational Resources Information Center

Saito, Hitomi; Miwa, Kazuhisa

2007-01-01

In this study, we design a learning environment that supports reflective activities for information seeking on the Web and evaluate its educational effects. The features of this design are: (1) to visualize the learners' search processes as described, based on a cognitive schema, (2) to support two types of reflective activities, such as…

Designing for Engagement: Using the ADDIE Model to Integrate High-Impact Practices into an Online Information Literacy Course

ERIC Educational Resources Information Center

Nichols Hess, Amanda Kathryn; Greer, Katie

2016-01-01

In this article, the authors share how a team of librarians used the ADDIE instructional design model to incorporate best practices in teaching and learning into an online, four-credit information literacy course. In this redesign process, the Association of American Colleges and Universities' high-impact practices and e-learning best practices…

Using the theory of planned behavior to determine factors influencing processed foods consumption behavior.

PubMed

Seo, Sunhee; Kim, Og Yeon; Shim, Soonmi

2014-06-01

The purpose of this study is to identify how level of information affected intention, using the Theory of Planned Behavior. The study was conducted survey in diverse community centers and shopping malls in Seoul, which yielded N = 209 datasets. To compare processed foods consumption behavior, we divided samples into two groups based on level of information about food additives (whether respondents felt that information on food additives was sufficient or not). We analyzed differences in attitudes toward food additives and toward purchasing processed foods, subjective norms, perceived behavioral control, and behavioral intentions to processed foods between sufficient information group and lack information group. The results confirmed that more than 78% of respondents thought information on food additives was insufficient. However, the group who felt information was sufficient had more positive attitudes about consuming processed foods and behavioral intentions than the group who thought information was inadequate. This study found people who consider that they have sufficient information on food additives tend to have more positive attitudes toward processed foods and intention to consume processed foods. This study suggests increasing needs for nutrition education on the appropriate use of processed foods. Designing useful nutrition education requires a good understanding of factors which influence on processed foods consumption.

Using the theory of planned behavior to determine factors influencing processed foods consumption behavior

PubMed Central

Kim, Og Yeon; Shim, Soonmi

2014-01-01

BACKGROUND/OBJECTIVES The purpose of this study is to identify how level of information affected intention, using the Theory of Planned Behavior. SUBJECTS/METHODS The study was conducted survey in diverse community centers and shopping malls in Seoul, which yielded N = 209 datasets. To compare processed foods consumption behavior, we divided samples into two groups based on level of information about food additives (whether respondents felt that information on food additives was sufficient or not). We analyzed differences in attitudes toward food additives and toward purchasing processed foods, subjective norms, perceived behavioral control, and behavioral intentions to processed foods between sufficient information group and lack information group. RESULTS The results confirmed that more than 78% of respondents thought information on food additives was insufficient. However, the group who felt information was sufficient had more positive attitudes about consuming processed foods and behavioral intentions than the group who thought information was inadequate. This study found people who consider that they have sufficient information on food additives tend to have more positive attitudes toward processed foods and intention to consume processed foods. CONCLUSIONS This study suggests increasing needs for nutrition education on the appropriate use of processed foods. Designing useful nutrition education requires a good understanding of factors which influence on processed foods consumption. PMID:24944779

Design and Evaluation of Wood Processing Facilities Using Object-Oriented Simulation

Treesearch

D. Earl Kline; Philip A. Araman

1992-01-01

Managers of hardwood processing facilities need timely information on which to base important decisions such as when to add costly equipment or how to improve profitability subject to time-varying demands. The overall purpose of this paper is to introduce a tool that can effectively provide such timely information. A simulation/animation modeling procedure is described...

nStudy: A System for Researching Information Problem Solving

ERIC Educational Resources Information Center

Winne, Philip H.; Nesbit, John C.; Popowich, Fred

2017-01-01

A bottleneck in gathering big data about learning is instrumentation designed to record data about processes students use to learn and information on which those processes operate. The software system nStudy fills this gap. nStudy is an extension to the Chrome web browser plus a server side database for logged trace data plus peripheral modules…

A Systems Approach to the Design and Operation of Effective Marketing Programs in Community Colleges.

ERIC Educational Resources Information Center

Scigliano, John A.

1983-01-01

Presents a research-based marketing model consisting of an environmental scanning process, a series of marketing audits, and an information-processing scheme. Views the essential elements of college marketing as information flow; high-level, long-term commitment; diverse strategies; innovation; and a broad view of marketing. Includes a marketing…

Training Needs Analysis. A Resource for Identifying Training Needs, Selecting Training Strategies, and Developing Training Plans.

ERIC Educational Resources Information Center

Bartram, Sharon; Gibson, Brenda

Designed as a practical tool for trainers, this manual contains 22 instruments and documents for gathering and processing information about training and development issues within an organization. Part one of the two-part manual examines the process of identifying and analyzing training needs. It reviews the different types of information the…

Towards a characterization of information automation systems on the flight deck

NASA Astrophysics Data System (ADS)

Dudley, Rachel Feddersen

This thesis summarizes research to investigate the characteristics that define information automation systems used on aircraft flight decks and the significant impacts that these characteristics have on pilot performance. Major accomplishments of the work include the development of a set of characteristics that describe information automation systems on the flight deck and an experiment designed to study a subset of these characteristics. Information automation systems on the flight deck are responsible for the collection, processing, analysis, and presentation of data to the flightcrew. These systems pose human factors issues and challenges that must be considered by designers of these systems. Based on a previously developed formal definition of information automation for aircraft flight deck systems, an analysis process was developed and conducted to reach a refined set of information automation characteristics. In this work, characteristics are defined as a set of properties or attributes that describe an information automation system's operation or behavior, which can be used to identify and assess potential human factors issues. Hypotheses were formed for a subset of the characteristics: Automation Visibility, Information Quality, and Display Complexity. An experimental investigation was developed to measure performance impacts related to these characteristics, which showed mixed results of expected and surprising findings, with many interactions. A set of recommendations were then developed based on the experimental observations. Ensuring that the right information is presented to pilots at the right time and in the appropriate manner is the job of flight deck system designers. This work provides a foundation for developing recommendations and guidelines specific to information automation on the flight deck with the goal of improving the design and evaluation of information automation systems before they are implemented.

NASA/DoD Aerospace Knowledge Diffusion Research Project. Paper 31: The information-seeking behavior of engineers

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Bishop, Ann P.; Barclay, Rebecca O.; Kennedy, John M.

1993-01-01

Engineers are an extraordinarily diverse group of professionals, but an attribute common to all engineers is their use of information. Engineering can be conceptualized as an information processing system that must deal with work-related uncertainty through patterns of technical communications. Throughout the process, data, information, and tacit knowledge are being acquired, produced, transferred, and utilized. While acknowledging that other models exist, we have chosen to view the information-seeking behavior of engineers within a conceptual framework of the engineer as an information processor. This article uses the chosen framework to discuss information-seeking behavior of engineers, reviewing selected literature and empirical studies from library and information science, management, communications, and sociology. The article concludes by proposing a research agenda designed to extend our current, limited knowledge of the way engineers process information.

Using a theory-driven conceptual framework in qualitative health research.

PubMed

Macfarlane, Anne; O'Reilly-de Brún, Mary

2012-05-01

The role and merits of highly inductive research designs in qualitative health research are well established, and there has been a powerful proliferation of grounded theory method in the field. However, tight qualitative research designs informed by social theory can be useful to sensitize researchers to concepts and processes that they might not necessarily identify through inductive processes. In this article, we provide a reflexive account of our experience of using a theory-driven conceptual framework, the Normalization Process Model, in a qualitative evaluation of general practitioners' uptake of a free, pilot, language interpreting service in the Republic of Ireland. We reflect on our decisions about whether or not to use the Model, and describe our actual use of it to inform research questions, sampling, coding, and data analysis. We conclude with reflections on the added value that the Model and tight design brought to our research.

Attention and Trust Biases in the Design of Augmented Reality Displays

DTIC Science & Technology

2000-04-01

storage, selective attention , and their mutual constraints within the human information processing system. Psychological Bulletin, 104(2), 163-191...the pilots’ attention at the cost of processing other information in the far domain beyond the symbology, i.e., attentional tunneling (Fadden et al...need to select between two sources of information, attention is allocated to the one which facilitates the user’s task. When only a single source of

Low cost solar array project: Experimental process system development unit for producing semiconductor-grade silicon using silane-to-silicon process

NASA Technical Reports Server (NTRS)

1980-01-01

The design, fabrication, and installation of an experimental process system development unit (EPSDU) were analyzed. Supporting research and development were performed to provide an information data base usable for the EPSDU and for technological design and economical analysis for potential scale-up of the process. Iterative economic analyses were conducted for the estimated product cost for the production of semiconductor grade silicon in a facility capable of producing 1000-MT/Yr.

A Synergy between the Technological Process and a Methodology for Web Design: Implications for Technological Problem Solving and Design

ERIC Educational Resources Information Center

Jakovljevic, Maria; Ankiewicz, Piet; De swardt, Estelle; Gross, Elna

2004-01-01

Traditional instructional methodology in the Information System Design (ISD) environment lacks explicit strategies for promoting the cognitive skills of prospective system designers. This contributes to the fragmented knowledge and low motivational and creative involvement of learners in system design tasks. In addition, present ISD methodologies,…

30 CFR 939.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall become applicable...

30 CFR 903.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Mining Operations, pertaining to petitions, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities, applies to surface...

30 CFR 939.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall become applicable...

30 CFR 903.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Mining Operations, pertaining to petitions, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities, applies to surface...

30 CFR 903.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Mining Operations, pertaining to petitions, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities, applies to surface...

30 CFR 939.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall become applicable...

30 CFR 939.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall become applicable...

30 CFR 939.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall become applicable...

30 CFR 903.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Mining Operations, pertaining to petitions, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities, applies to surface...

Design & layout of recreation facilities

Treesearch

Howard R. Orr

1971-01-01

Design and layout of recreation facilities is a problem solving process that must be divorced from the emotionalism that has shrouded outdoor recreation and must deal deliberately with the growing information concerning people and natural resources.

DESIGN MANUAL: PHOSPHORUS REMOVAL

EPA Science Inventory

This manual summarizes process design information for the best developed methods for removing phosphorus from wastewater. his manual discusses several proven phosphorus removal methods, including phosphorus removal obtainable through biological activity as well as chemical precip...

Medication errors in residential aged care facilities: a distributed cognition analysis of the information exchange process.

PubMed

Tariq, Amina; Georgiou, Andrew; Westbrook, Johanna

2013-05-01

Medication safety is a pressing concern for residential aged care facilities (RACFs). Retrospective studies in RACF settings identify inadequate communication between RACFs, doctors, hospitals and community pharmacies as the major cause of medication errors. Existing literature offers limited insight about the gaps in the existing information exchange process that may lead to medication errors. The aim of this research was to explicate the cognitive distribution that underlies RACF medication ordering and delivery to identify gaps in medication-related information exchange which lead to medication errors in RACFs. The study was undertaken in three RACFs in Sydney, Australia. Data were generated through ethnographic field work over a period of five months (May-September 2011). Triangulated analysis of data primarily focused on examining the transformation and exchange of information between different media across the process. The findings of this study highlight the extensive scope and intense nature of information exchange in RACF medication ordering and delivery. Rather than attributing error to individual care providers, the explication of distributed cognition processes enabled the identification of gaps in three information exchange dimensions which potentially contribute to the occurrence of medication errors namely: (1) design of medication charts which complicates order processing and record keeping (2) lack of coordination mechanisms between participants which results in misalignment of local practices (3) reliance on restricted communication bandwidth channels mainly telephone and fax which complicates the information processing requirements. The study demonstrates how the identification of these gaps enhances understanding of medication errors in RACFs. Application of the theoretical lens of distributed cognition can assist in enhancing our understanding of medication errors in RACFs through identification of gaps in information exchange. Understanding the dynamics of the cognitive process can inform the design of interventions to manage errors and improve residents' safety. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Towards the Integration of APECS with VE-Suite to Create a Comprehensive Virtual Engineering Environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCorkle, D.; Yang, C.; Jordan, T.

2007-06-01

Modeling and simulation tools are becoming pervasive in the process engineering practice of designing advanced power generation facilities. These tools enable engineers to explore many what-if scenarios before cutting metal or constructing a pilot scale facility. While such tools enable investigation of crucial plant design aspects, typical commercial process simulation tools such as Aspen Plus®, gPROMS®, and HYSYS® still do not explore some plant design information, including computational fluid dynamics (CFD) models for complex thermal and fluid flow phenomena, economics models for policy decisions, operational data after the plant is constructed, and as-built information for use in as-designed models. Softwaremore » tools must be created that allow disparate sources of information to be integrated if environments are to be constructed where process simulation information can be accessed. At the Department of Energy’s (DOE) National Energy Technology Laboratory (NETL), the Advanced Process Engineering Co-Simulator (APECS) has been developed as an integrated software suite that combines process simulation (e.g., Aspen Plus) and high-fidelity equipment simulation (e.g., Fluent® CFD), together with advanced analysis capabilities including case studies, sensitivity analysis, stochastic simulation for risk/uncertainty analysis, and multi-objective optimization. In this paper, we discuss the initial phases of integrating APECS with the immersive and interactive virtual engineering software, VE-Suite, developed at Iowa State University and Ames Laboratory. VE-Suite utilizes the ActiveX (OLE Automation) controls in Aspen Plus wrapped by the CASI library developed by Reaction Engineering International to run the process simulation and query for unit operation results. This integration permits any application that uses the VE-Open interface to integrate with APECS co-simulations, enabling construction of the comprehensive virtual engineering environment needed for the rapid engineering of advanced power generation facilities.« less

Design of information systems for population data collection based on client-server at Bagolo village

NASA Astrophysics Data System (ADS)

Nugraha, Ucu

2017-06-01

Village is the level under the sub-district level in the governmental system in a region where the information system of population data service is majority provided in a manual system. However, such systems frequently lead to invalid data in addition to the available data that does not correspond to the facts as the impact of frequent errors in the process of data collection related to population including the data of the elderly and the process of data transfer. Similarly, the data correspondences such as death certificate, birth certificate, a certificate of domicile change, and so forth, have their own problems. Data archives are frequently non-systematic because they are not organized properly or not stored in a database. Nevertheless, information service system for population census at this level can assist government agencies, especially in the management of population census at the village level. A designed system can make the process of a population census easier. It is initiated by the submission of population letter by each citizen who comes to the village administrative office. Population census information system based on client-server at Bagolo Village was designed in effective and non-complicated workflow and interface design. By using the client-server as the basis, the data will be stored centrally on the server, so it can reduce data duplication and data loss. Therefore, when the local governments require data information related to the population data of a village, they can obtain it easily without the need to collect the data directly at the respective village.

Innovation in Information Technology: Theoretical and Empirical Study in SMQR Section of Export Import in Automotive Industry

NASA Astrophysics Data System (ADS)

Edi Nugroho Soebandrija, Khristian; Pratama, Yogi

2014-03-01

This paper has the objective to provide the innovation in information technology in both theoretical and empirical study. Precisely, both aspects relate to the Shortage Mispacking Quality Report (SMQR) Claims in Export and Import in Automotive Industry. This paper discusses the major aspects of Innovation, Information Technology, Performance and Competitive Advantage. Furthermore, In the empirical study of PT. Astra Honda Motor (AHM) refers to SMQR Claims, Communication Systems, Analysis and Design Systems. Briefly both aspects of the major aspects and its empirical study are discussed in the Introduction Session. Furthermore, the more detail discussion is conducted in the related aspects in other sessions of this paper, in particular in Literature Review in term classical and updated reference of current research. The increases of SMQR claim and communication problem at PT. Astra Daihatsu Motor (PT. ADM) which still using the email cause the time of claim settlement become longer and finally it causes the rejected of SMQR claim by supplier. With presence of this problem then performed to design the integrated communication system to manage the communication process of SMQR claim between PT. ADM with supplier. The systems was analyzed and designed is expected to facilitate the claim communication process so that can be run in accordance with the procedure and fulfill the target of claim settlement time and also eliminate the difficulties and problems on the previous manual communication system with the email. The design process of the system using the approach of system development life cycle method by Kendall & Kendall (2006)which design process covers the SMQR problem communication process, judgment process by the supplier, claim process, claim payment process and claim monitoring process. After getting the appropriate system designs for managing the SMQR claim, furthermore performed the system implementation and can be seen the improvement in claim communication process and settlement time become faster and achieve the target. The conclusion in this paper comprises two major aspects. The first one refers to the conclusion in term of theory and concept. The second one refers to the conclusion in term of the empirical study of one of automotive industries in Indonesia. Both of them are expected to have contribution in current and future research of related aspects that are discussed in this paper.

MRNIDX - Marine Data Index: Database Description, Operation, Retrieval, and Display

USGS Publications Warehouse

Paskevich, Valerie F.

1982-01-01

A database referencing the location and content of data stored on magnetic medium was designed to assist in the indexing of time-series and spatially dependent marine geophysical data collected or processed by the U. S. Geological Survey. The database was designed and created for input to the Geologic Retrieval and Synopsis Program (GRASP) to allow selective retrievals of information pertaining to location of data, data format, cruise, geographical bounds and collection dates of data. This information is then used to locate the stored data for administrative purposes or further processing. Database utilization is divided into three distinct operations. The first is the inventorying of the data and the updating of the database, the second is the retrieval of information from the database, and the third is the graphic display of the geographical boundaries to which the retrieved information pertains.

LOD BIM Element specification for Railway Turnout Systems Risk Mitigation using the Information Delivery Manual

NASA Astrophysics Data System (ADS)

Gigante-Barrera, Ángel; Dindar, Serdar; Kaewunruen, Sakdirat; Ruikar, Darshan

2017-10-01

Railway turnouts are complex systems designed using complex geometries and grades which makes them difficult to be managed in terms of risk prevention. This feature poses a substantial peril to rail users as it is considered a cause of derailment. In addition, derailment deals to financial losses due to operational downtimes and monetary compensations in case of death or injure. These are fundamental drivers to consider mitigating risks arising from poor risk management during design. Prevention through design (PtD) is a process that introduces tacit knowledge from industry professionals during the design process. There is evidence that Building Information Modelling (BIM) can help to mitigate risk since the inception of the project. BIM is considered an Information System (IS) were tacit knowledge can be stored and retrieved from a digital database making easy to take promptly decisions as information is ready to be analysed. BIM at the model element level entails working with 3D elements and embedded data, therefore adding a layer of complexity to the management of information along the different stages of the project and across different disciplines. In order to overcome this problem, the industry has created a framework for model progression specification named Level of Development (LOD). The paper presents an IDM based framework for design risk mitigation through code validation using the LOD. This effort resulted on risk datasets which describe graphically and non-graphically a rail turnout as the model progresses. Thus, permitting its inclusion within risk information systems. The assignment of an LOD construct to a set of data, requires specialised management and process related expertise. Furthermore, the selection of a set of LOD constructs requires a purpose based analysis. Therefore, a framework for LOD constructs implementation within the IDM for code checking is required for the industry to progress in this particular field.

School District Information Study. Planning for the Management of Information through Technology. A Planning and Staff Development Project.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Div. of Elementary and Secondary Education Planning.

Designed to provide assistance to school district personnel who seek to develop a plan for information management and related applications of technology, this guide presents the School District Information Study (SDIS) model for the review of management policies, procedures, and activities related to information processing done by school district…

Analysis of 100 Years of Curriculum Designs

ERIC Educational Resources Information Center

Kelting-Gibson, Lynn

2013-01-01

Fifteen historical and contemporary curriculum designs were analyzed for elements of assessment that support student learning and inform instructional decisions. Educational researchers are purposely paying attention to the role assessment plays in a well-designed planning and teaching process. Assessment is a vital component to educational…

CVISN guide to top-level design : preliminary version P1.1

DOT National Transportation Integrated Search

1999-06-25

The CVISN (Commercial Vehicle Information Systems and Networks) guide to top-level design shows the initial steps in the process of deploying CVISN in a state. For purposes of these guides, top-level design encompasses setting the scope of the projec...

IPAD project overview

NASA Technical Reports Server (NTRS)

Fulton, R. E.

1980-01-01

To respond to national needs for improved productivity in engineering design and manufacturing, a NASA supported joint industry/government project is underway denoted Integrated Programs for Aerospace-Vehicle Design (IPAD). The objective is to improve engineering productivity through better use of computer technology. It focuses on development of technology and associated software for integrated company-wide management of engineering information. The project has been underway since 1976 under the guidance of an Industry Technical Advisory Board (ITAB) composed of representatives of major engineering and computer companies and in close collaboration with the Air Force Integrated Computer-Aided Manufacturing (ICAM) program. Results to date on the IPAD project include an in-depth documentation of a representative design process for a large engineering project, the definition and design of computer-aided design software needed to support that process, and the release of prototype software to integrate selected design functions. Ongoing work concentrates on development of prototype software to manage engineering information, and initial software is nearing release.

Preliminary design review package for the solar heating and cooling central data processing system

NASA Technical Reports Server (NTRS)

1976-01-01

The Central Data Processing System (CDPS) is designed to transform the raw data collected at remote sites into performance evaluation information for assessing the performance of solar heating and cooling systems. Software requirements for the CDPS are described. The programming standards to be used in development, documentation, and maintenance of the software are discussed along with the CDPS operations approach in support of daily data collection and processing.

User perception and interpretation of tornado probabilistic hazard information: Comparison of four graphical designs.

PubMed

Miran, Seyed M; Ling, Chen; James, Joseph J; Gerard, Alan; Rothfusz, Lans

2017-11-01

Effective design for presenting severe weather information is important to reduce devastating consequences of severe weather. The Probabilistic Hazard Information (PHI) system for severe weather is being developed by NOAA National Severe Storms Laboratory (NSSL) to communicate probabilistic hazardous weather information. This study investigates the effects of four PHI graphical designs for tornado threat, namely, "four-color"," red-scale", "grayscale" and "contour", on users' perception, interpretation, and reaction to threat information. PHI is presented on either a map background or a radar background. Analysis showed that the accuracy was significantly higher and response time faster when PHI was displayed on map background as compared to radar background due to better contrast. When displayed on a radar background, "grayscale" design resulted in a higher accuracy of responses. Possibly due to familiarity, participants reported four-color design as their favorite design, which also resulted in the fastest recognition of probability levels on both backgrounds. Our study shows the importance of using intuitive color-coding and sufficient contrast in conveying probabilistic threat information via graphical design. We also found that users follows a rational perceiving-judging-feeling-and acting approach in processing probabilistic hazard information for tornado. Copyright © 2017 Elsevier Ltd. All rights reserved.

30 CFR 922.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

30 CFR 922.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

30 CFR 947.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

30 CFR 941.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

30 CFR 922.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

30 CFR 912.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

30 CFR 905.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Mining Operations, pertaining to petitions, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

30 CFR 910.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

30 CFR 905.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Mining Operations, pertaining to petitions, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

30 CFR 905.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Mining Operations, pertaining to petitions, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

30 CFR 941.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

30 CFR 912.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

30 CFR 941.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

30 CFR 922.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

30 CFR 947.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

30 CFR 947.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

30 CFR 941.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

30 CFR 910.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

30 CFR 910.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

30 CFR 910.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

30 CFR 905.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Mining Operations, pertaining to petitions, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

30 CFR 941.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

30 CFR 912.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

30 CFR 947.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

30 CFR 947.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

30 CFR 922.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

30 CFR 912.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and regulatory responsibilities shall apply to surface...

The Design of Case Products’ Shape Form Information Database Based on NURBS Surface

NASA Astrophysics Data System (ADS)

Liu, Xing; Liu, Guo-zhong; Xu, Nuo-qi; Zhang, Wei-she

2017-07-01

In order to improve the computer design of product shape design,applying the Non-uniform Rational B-splines(NURBS) of curves and surfaces surface to the representation of the product shape helps designers to design the product effectively.On the basis of the typical product image contour extraction and using Pro/Engineer(Pro/E) to extract the geometric feature of scanning mold,in order to structure the information data base system of value point,control point and node vector parameter information,this paper put forward a unified expression method of using NURBS curves and surfaces to describe products’ geometric shape and using matrix laboratory(MATLAB) to simulate when products have the same or similar function.A case study of electric vehicle’s front cover illustrates the access process of geometric shape information of case product in this paper.This method can not only greatly reduce the capacity of information debate,but also improve the effectiveness of computer aided geometric innovation modeling.

Thoughts on the Semantics of "Information"

ERIC Educational Resources Information Center

Berger, Louis S.

1971-01-01

SRI attempts to apply aerospace research results to biomedicine are revealing inadequacies of present information systems when information originates in different discipline from that of user. Author suggests catergorizing characteristics of originator, symbolic vehicle, coding process and user, with possible design of new systems as well. (PD)

Professional Learning Networks Designed for Teacher Learning

ERIC Educational Resources Information Center

Trust, Torrey

2012-01-01

In the information age, students must learn to navigate and evaluate an expanding network of information. Highly effective teachers model this process of information analysis and knowledge acquisition by continually learning through collaboration, professional development, and studying pedagogical techniques and best practices. Many teachers have…

Knowledge-Based Integrated Information Systems Engineering: Highlights and Bibliography. Volume 1.

DTIC Science & Technology

1987-12-01

of database technology, 0 communication technology and expert systems technology. , Organizational issues cover the process of making controlled... process of linking strategic goals, technical issues , and organizational aspects can be depicted as shown in Figure 2.2. At the top level, strategic...an integrated information system design and implementation in a short period of time [4]. 2.2.2 Emphasis on Process It was mentioned in Section 1.3

Testing the item-order account of design effects using the production effect.

PubMed

Jonker, Tanya R; Levene, Merrick; Macleod, Colin M

2014-03-01

A number of memory phenomena evident in recall in within-subject, mixed-lists designs are reduced or eliminated in between-subject, pure-list designs. The item-order account (McDaniel & Bugg, 2008) proposes that differential retention of order information might underlie this pattern. According to this account, order information may be encoded when a common form of processing is used alone in a list (e.g., reading), but not when an unusual form of processing is used (e.g., generation) or when a common form and an unusual form are mixed within a list. The production effect--better memory for words said aloud than for words read silently--shows this same design-contingent pattern. In 2 experiments, we investigated whether differential order retention might underlie the production effect. Consistent with the item-order account, we found that retention of order information was better in pure silent lists than in either pure aloud lists or mixed lists, as measured using an order reconstruction test. Moreover, in Experiment 2, order was better preserved in free recall of pure silent lists than of either pure aloud or mixed lists. Thus, production joins the set of tasks identified by McDaniel and Bugg (2008), and our findings suggest a role for order processing in explaining the production effect.

Potential subjects' responses to an ethics questionnaire in a phase I study of deep brain stimulation in early Parkinson's disease.

PubMed

Finder, Stuart G; Bliton, Mark J; Gill, Chandler E; Davis, Thomas L; Konrad, Peter E; Charles, P David

2012-01-01

Central to ethically justified clinical trial design is the need for an informed consent process responsive to how potential subjects actually comprehend study participation, especially study goals, risks, and potential benefits. This will be particularly challenging when studying deep brain stimulation and whether it impedes symptom progression in Parkinson's disease, since potential subjects will be Parkinson's patients for whom deep brain stimulation will likely have therapeutic value in the future as their disease progresses. As part of an expanded informed consent process for a pilot Phase I study of deep brain stimulation in early stage Parkinson's disease, an ethics questionnaire composed of 13 open-ended questions was distributed to potential subjects. The questionnaire was designed to guide potential subjects in thinking about their potential participation. While the purpose of the study (safety and tolerability) was extensively presented during the informed consent process, in returned responses 70 percent focused on effectiveness and 91 percent included personal benefit as poten- tial benefit from enrolling. However, 91 percent also indicated helping other Parkinson's patients as motivation when considering whether or not to enroll. This combination of responses highlights two issues to which investigators need to pay close attention in future trial designs: (1) how, and in what ways, informed consent processes reinforce potential subjects' preconceived understandings of benefit, and (2) that potential subjects see themselves as part of a community of Parkinson's sufferers with responsibilities extending beyond self-interest. More importantly, it invites speculation that a different paradigm for informed consent may be needed.

Achieving a Risk-Informed Decision-Making Environment at NASA: The Emphasis of NASA's Risk Management Policy

NASA Technical Reports Server (NTRS)

Dezfuli, Homayoon

2010-01-01

This slide presentation reviews the evolution of risk management (RM) at NASA. The aim of the RM approach at NASA is to promote an approach that is heuristic, proactive, and coherent across all of NASA. Risk Informed Decision Making (RIDM) is a decision making process that uses a diverse set of performance measures along with other considerations within a deliberative process to inform decision making. RIDM is invoked for key decisions such as architecture and design decisions, make-buy decisions, and budget reallocation. The RIDM process and how it relates to the continuous Risk Management (CRM) process is reviewed.

Quantitative optical imaging and sensing by joint design of point spread functions and estimation algorithms

NASA Astrophysics Data System (ADS)

Quirin, Sean Albert

The joint application of tailored optical Point Spread Functions (PSF) and estimation methods is an important tool for designing quantitative imaging and sensing solutions. By enhancing the information transfer encoded by the optical waves into an image, matched post-processing algorithms are able to complete tasks with improved performance relative to conventional designs. In this thesis, new engineered PSF solutions with image processing algorithms are introduced and demonstrated for quantitative imaging using information-efficient signal processing tools and/or optical-efficient experimental implementations. The use of a 3D engineered PSF, the Double-Helix (DH-PSF), is applied as one solution for three-dimensional, super-resolution fluorescence microscopy. The DH-PSF is a tailored PSF which was engineered to have enhanced information transfer for the task of localizing point sources in three dimensions. Both an information- and optical-efficient implementation of the DH-PSF microscope are demonstrated here for the first time. This microscope is applied to image single-molecules and micro-tubules located within a biological sample. A joint imaging/axial-ranging modality is demonstrated for application to quantifying sources of extended transverse and axial extent. The proposed implementation has improved optical-efficiency relative to prior designs due to the use of serialized cycling through select engineered PSFs. This system is demonstrated for passive-ranging, extended Depth-of-Field imaging and digital refocusing of random objects under broadband illumination. Although the serialized engineered PSF solution is an improvement over prior designs for the joint imaging/passive-ranging modality, it requires the use of multiple PSFs---a potentially significant constraint. Therefore an alternative design is proposed, the Single-Helix PSF, where only one engineered PSF is necessary and the chromatic behavior of objects under broadband illumination provides the necessary information transfer. The matched estimation algorithms are introduced along with an optically-efficient experimental system to image and passively estimate the distance to a test object. An engineered PSF solution is proposed for improving the sensitivity of optical wave-front sensing using a Shack-Hartmann Wave-front Sensor (SHWFS). The performance limits of the classical SHWFS design are evaluated and the engineered PSF system design is demonstrated to enhance performance. This system is fabricated and the mechanism for additional information transfer is identified.

Consume, Modify, Share (CMS): The Interplay between Individual Decisions and Structural Network Properties in the Diffusion of Information

PubMed Central

Koren, Hila; Kaminer, Ido

2016-01-01

Widely used information diffusion models such as Independent Cascade Model, Susceptible Infected Recovered (SIR) and others fail to acknowledge that information is constantly subject to modification. Some aspects of information diffusion are best explained by network structural characteristics while in some cases strong influence comes from individual decisions. We introduce reinvention, the ability to modify information, as an individual level decision that affects the diffusion process as a whole. Based on a combination of constructs from the Diffusion of Innovations and the Critical Mass Theories, the present study advances the CMS (consume, modify, share) model which accounts for the interplay between network structure and human behavior and interactions. The model's building blocks include processes leading up to and following the formation of a critical mass of information adopters and disseminators. We examine the formation of an inflection point, information reach, sustainability of the diffusion process and collective value creation. The CMS model is tested on two directed networks and one undirected network, assuming weak or strong ties and applying constant and relative modification schemes. While all three networks are designed for disseminating new knowledge they differ in structural properties. Our findings suggest that modification enhances the diffusion of information in networks that support undirected connections and carries the biggest effect when information is shared via weak ties. Rogers' diffusion model and traditional information contagion models are fine tuned. Our results show that modifications not only contribute to a sustainable diffusion process, but also aid information in reaching remote areas of the network. The results point to the importance of cultivating weak ties, allowing reciprocal interaction among nodes and supporting the modification of information in promoting diffusion processes. These results have theoretical and practical implications for designing networks aimed at accelerating the creation and diffusion of information. PMID:27798636

Consume, Modify, Share (CMS): The Interplay between Individual Decisions and Structural Network Properties in the Diffusion of Information.

PubMed

Koren, Hila; Kaminer, Ido; Raban, Daphne Ruth

2016-01-01

Widely used information diffusion models such as Independent Cascade Model, Susceptible Infected Recovered (SIR) and others fail to acknowledge that information is constantly subject to modification. Some aspects of information diffusion are best explained by network structural characteristics while in some cases strong influence comes from individual decisions. We introduce reinvention, the ability to modify information, as an individual level decision that affects the diffusion process as a whole. Based on a combination of constructs from the Diffusion of Innovations and the Critical Mass Theories, the present study advances the CMS (consume, modify, share) model which accounts for the interplay between network structure and human behavior and interactions. The model's building blocks include processes leading up to and following the formation of a critical mass of information adopters and disseminators. We examine the formation of an inflection point, information reach, sustainability of the diffusion process and collective value creation. The CMS model is tested on two directed networks and one undirected network, assuming weak or strong ties and applying constant and relative modification schemes. While all three networks are designed for disseminating new knowledge they differ in structural properties. Our findings suggest that modification enhances the diffusion of information in networks that support undirected connections and carries the biggest effect when information is shared via weak ties. Rogers' diffusion model and traditional information contagion models are fine tuned. Our results show that modifications not only contribute to a sustainable diffusion process, but also aid information in reaching remote areas of the network. The results point to the importance of cultivating weak ties, allowing reciprocal interaction among nodes and supporting the modification of information in promoting diffusion processes. These results have theoretical and practical implications for designing networks aimed at accelerating the creation and diffusion of information.

Basic Concepts Required in the Development of a Planning Information System.

ERIC Educational Resources Information Center

Kennedy, F. D.

This report, the result of developmental research on a planning information system for North Carolina, describes the planning process at higher levels of State government, defines a general information system and derives a planning information system from various types of planning, provides guidelines for system design and evaluation, and…

Gradually including potential users: A tool to counter design exclusions.

PubMed

Zitkus, Emilene; Langdon, Patrick; Clarkson, P John

2018-01-01

The paper describes an iterative development process used to understand the suitability of different inclusive design evaluation tools applied into design practices. At the end of this process, a tool named Inclusive Design Advisor was developed, combining data related to design features of small appliances with ergonomic task demands, anthropometric data and exclusion data. When auditing a new design the tool examines the exclusion that each design feature can cause, followed by objective recommendations directly related to its features. Interactively, it allows designers or clients to balance design changes with the exclusion caused. It presents the type of information that enables designers and clients to discuss user needs and make more inclusive design decisions. Copyright © 2017. Published by Elsevier Ltd.

Designing Health Websites Based on Users' Web-Based Information-Seeking Behaviors: A Mixed-Method Observational Study.

PubMed

Pang, Patrick Cheong-Iao; Chang, Shanton; Verspoor, Karin; Pearce, Jon

2016-06-06

Laypeople increasingly use the Internet as a source of health information, but finding and discovering the right information remains problematic. These issues are partially due to the mismatch between the design of consumer health websites and the needs of health information seekers, particularly the lack of support for "exploring" health information. The aim of this research was to create a design for consumer health websites by supporting different health information-seeking behaviors. We created a website called Better Health Explorer with the new design. Through the evaluation of this new design, we derive design implications for future implementations. Better Health Explorer was designed using a user-centered approach. The design was implemented and assessed through a laboratory-based observational study. Participants tried to use Better Health Explorer and another live health website. Both websites contained the same content. A mixed-method approach was adopted to analyze multiple types of data collected in the experiment, including screen recordings, activity logs, Web browsing histories, and audiotaped interviews. Overall, 31 participants took part in the observational study. Our new design showed a positive result for improving the experience of health information seeking, by providing a wide range of information and an engaging environment. The results showed better knowledge acquisition, a higher number of page reads, and more query reformulations in both focused and exploratory search tasks. In addition, participants spent more time to discover health information with our design in exploratory search tasks, indicating higher engagement with the website. Finally, we identify 4 design considerations for designing consumer health websites and health information-seeking apps: (1) providing a dynamic information scope; (2) supporting serendipity; (3) considering trust implications; and (4) enhancing interactivity. Better Health Explorer provides strong support for the heterogeneous and shifting behaviors of health information seekers and eases the health information-seeking process. Our findings show the importance of understanding different health information-seeking behaviors and highlight the implications for designers of consumer health websites and health information-seeking apps.

A service concept and tools to improve maternal and newborn health in Nigeria and Uganda.

PubMed

Salgado, Mariana; Wendland, Melanie; Rodriguez, Damaris; Bohren, Meghan A; Oladapo, Olufemi T; Ojelade, Olubunmi A; Mugerwa, Kidza; Fawole, Bukola

2017-12-01

The "Better Outcomes in Labor Difficulty" (BOLD) project used a service design process to design a set of tools to improve quality of care during childbirth by strengthening linkages between communities and health facilities in Nigeria and Uganda. This paper describes the Passport to Safer Birth concept and the tools developed as a result. Service design methods were used to identify facilitators and barriers to quality care, and to develop human-centered solutions. The service design process had three phases: Research for Design, Concept Design, and Detail Design, undertaken in eight hospitals and catchment communities. The service concept "Better Beginnings" comprises three tools. The "Pregnancy Purse" provides educational information to women throughout pregnancy. The "Birth Board" is a visual communication tool that presents the labor and childbirth process. The "Family Pass" is a set of wearable passes for the woman and her supporter to facilitate communication of care preferences. The Better Beginnings service concept and tools form the basis for the promotion of access to information and knowledge acquisition, and could improve communication between the healthcare provider, the woman, and her family during childbirth. © 2017 International Federation of Gynecology and Obstetrics. The World Health Organization retains copyright and all other rights in the manuscript of this article as submitted for publication.

Proceedings of the Seminar on the DOD Computer Security Initiative (4th) Held at the National Bureau of Standards, Gaithersburg, Maryland on August 10-12, 1981.

DTIC Science & Technology

1981-01-01

comparison of formal and informal design methodologies will show how we think they are converging. Lastly, I will describe our involvement with the DoD...computer security must begin with the design methodology , with the objective being provability. The idea ofa formal evaluation and on-the-shelf... Methodologies ] Here we can compare the formal design methodologies with those used by informal practitioners like Control Data. Obviously, both processes

Usability engineering for augmented reality: employing user-based studies to inform design.

PubMed

Gabbard, Joseph L; Swan, J Edward

2008-01-01

A major challenge, and thus opportunity, in the field of human-computer interaction and specifically usability engineering is designing effective user interfaces for emerging technologies that have no established design guidelines or interaction metaphors or introduce completely new ways for users to perceive and interact with technology and the world around them. Clearly, augmented reality is one such emerging technology. We propose a usability engineering approach that employs user-based studies to inform design, by iteratively inserting a series of user-based studies into a traditional usability engineering lifecycle to better inform initial user interface designs. We present an exemplar user-based study conducted to gain insight into how users perceive text in outdoor augmented reality settings and to derive implications for design in outdoor augmented reality. We also describe lessons learned from our experiences conducting user-based studies as part of the design process.

Designing the Information Literacy Competency Standards for nursing.

PubMed

Phelps, Sue F

2013-01-01

This column documents the rationale for creating information literacy competency standards for nursing based on the Association of College and Research Libraries (ACRL) "Information Literacy Competency Standards for Higher Education" and the three documents from the American Association of Colleges of Nursing (AACN) on essential skills for nurses in baccalaureate, masters, and doctoral level education and practice. It chronicles the process of the task force which is designing the discipline specific skills and predicts the value of their use, once they are published.

Drama advertisements: moderating effects of self-relevance on the relations among empathy, information processing, and attitudes.

PubMed

Chebat, Jean-Charles; Vercollier, Sarah Drissi; Gélinas-Chebat, Claire

2003-06-01

The effects of drama versus lecture format in public service advertisements are studied in a 2 (format) x 2 (malaria vs AIDS) factorial design. Two structural equation models are built (one for each level of self-relevance), showing two distinct patterns. In both low and high self-relevant situations, empathy plays a key role. Under low self-relevance conditions, drama enhances information processing through empathy. Under high self-relevant conditions, the advertisement format has neither significant cognitive or empathetic effects. The information processing generated by the highly relevant topic affects viewers' empathy, which in turn affects the attitude the advertisement and the behavioral intent. As predicted by the Elaboration Likelihood Model, the advertisement format enhances the attitudes and information processing mostly under low self-relevant conditions. Under low self-relevant conditions, empathy enhances information processing while under high self-relevance, the converse relation holds.

Application of the Life Cycle Analysis and the Building Information Modelling Software in the Architectural Climate Change-Oriented Design Process

NASA Astrophysics Data System (ADS)

Gradziński, Piotr

2017-10-01

Whereas World’s climate is changing (inter alia, under the influence of architecture activity), the author attempts to reorientations design practice primarily in a direction the use and adapt to the climatic conditions. Architectural Design using in early stages of the architectural Design Process of the building, among other Life Cycle Analysis (LCA) and digital analytical tools BIM (Building Information Modelling) defines the overriding requirements which the designer/architect should meet. The first part, the text characterized the architecture activity influences (by consumption, pollution, waste, etc.) and the use of building materials (embodied energy, embodied carbon, Global Warming Potential, etc.) within the meaning of the direct negative environmental impact. The second part, the paper presents the revision of the methods and analytical techniques prevent negative influences. Firstly, showing the study of the building by using the Life Cycle Analysis of the structure (e.g. materials) and functioning (e.g. energy consumptions) of the architectural object (stages: before use, use, after use). Secondly, the use of digital analytical tools for determining the benefits of running multi-faceted simulations in terms of environmental factors (exposure to light, shade, wind) directly affecting shaping the form of the building. The conclusion, author’s research results highlight the fact that indicates the possibility of building design using the above-mentioned elements (LCA, BIM) causes correction, early designs decisions in the design process of architectural form, minimizing the impact on nature, environment. The work refers directly to the architectural-environmental dimensions, orienting the design process of buildings in respect of widely comprehended climatic changes.

Corporate dashboard for payphone service

NASA Astrophysics Data System (ADS)

Siraj, Fadzilah; Shadan, Hezlin

2015-12-01

Making assured that managements are kept abreast of what is happening in the company is not an easy task. The quantity of data generated by the business process is astonishing large and non-centralized. The challenge facing business organizations is how to extract, load, transform data, and then deliver useful information to key decision makers. The major challenge for the payphone industries is in making a good decision, particularly to increase quality of service, customer satisfaction while achieving high revenue. With current practice, the process is very time consuming and therefore, a systematic and informative corporate dashboard needs to be provided especially for managerial level in supporting their decision making process. This paper proposed a dashboard application design that provides a single-screen display of relevant information such as the phone performance and coin collection reports, as well as generated revenue to enable faster and more effective decision making. The development of the dashboard is divided into requirement, design and implementation phases. The implementation using real data has demonstrated the potential use of the dashboard. The evaluation results indicate that the dashboard can be used as a tool that can support payphone operation works and decision process by providing the analytical analysis of the KPI report and the performance status. In addition, the results can be used as a guideline for the dashboard developer to understand the process and focuses on the key elements and the principle in designing the effective dashboard.

Research Libraries--Automation and Cooperation.

ERIC Educational Resources Information Center

McDonald, David R.; Hurowitz, Robert

1982-01-01

Description of Research Libraries Information Network, an automated technical processing and information retrieval system, notes subsystems (acquisitions, cataloging, message, print, tables), functions, design, and benefits to participating libraries. (Request complimentary subscription on institution letterhead from Editor, "Perspectives in…

78 FR 74146 - Agency Information Collection Activities; Submission for Office of Management and Budget Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-10

... for, the manufacture, preproduction design validation (including a process to assess the performance... requirements governing the design, manufacture, packing, labeling, storage, installation, and servicing of all... for Quality Assurance in Design/Development, Production, Installation, and Servicing.'' The CGMP/QS...

75 FR 63834 - Agency Information Collection Activities; Submission for Office of Management and Budget Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-18

... facilities and controls used for, the manufacture, preproduction design validation (including a process to... requirements governing the design, manufacture, packing, labeling, storage, installation, and servicing of all... Model for Quality Assurance in Design/Development, Production, Installation, and Servicing.'' The CGMP...

10 CFR Appendix A to Part 725 - Categories of Restricted Data Available

Code of Federal Regulations, 2011 CFR

2011-01-01

... centrifuge or gaseous diffusion processes. b. Design, construction, and operation of any plant, facility or..., design, criticality studies and operation of reactors, reactor systems and reactor components. d... aqueous lithium hydroxide solution in packed columns. Not included is information regarding plant design...

10 CFR Appendix A to Part 725 - Categories of Restricted Data Available

Code of Federal Regulations, 2012 CFR

2012-01-01

... centrifuge or gaseous diffusion processes. b. Design, construction, and operation of any plant, facility or..., design, criticality studies and operation of reactors, reactor systems and reactor components. d... aqueous lithium hydroxide solution in packed columns. Not included is information regarding plant design...

10 CFR Appendix A to Part 725 - Categories of Restricted Data Available

Code of Federal Regulations, 2010 CFR

2010-01-01

... centrifuge or gaseous diffusion processes. b. Design, construction, and operation of any plant, facility or..., design, criticality studies and operation of reactors, reactor systems and reactor components. d... aqueous lithium hydroxide solution in packed columns. Not included is information regarding plant design...

10 CFR Appendix A to Part 725 - Categories of Restricted Data Available

Code of Federal Regulations, 2014 CFR

2014-01-01

... centrifuge or gaseous diffusion processes. b. Design, construction, and operation of any plant, facility or..., design, criticality studies and operation of reactors, reactor systems and reactor components. d... aqueous lithium hydroxide solution in packed columns. Not included is information regarding plant design...

Military Medical Decision Support for Homeland Defense During Emergency

DTIC Science & Technology

2004-12-01

abstraction hierarchy, three levels of information requirement for designing emergency training interface are recognized. These are epistemological ...support human decision making process is considered to be decision-centric. A typical decision-centric interface is supported by at least four design ... Designing Emergency Training Interface ......................................................................................... 5 Epistemological

An information driven strategy to support multidisciplinary design

NASA Technical Reports Server (NTRS)

Rangan, Ravi M.; Fulton, Robert E.

1990-01-01

The design of complex engineering systems such as aircraft, automobiles, and computers is primarily a cooperative multidisciplinary design process involving interactions between several design agents. The common thread underlying this multidisciplinary design activity is the information exchange between the various groups and disciplines. The integrating component in such environments is the common data and the dependencies that exist between such data. This may be contrasted to classical multidisciplinary analyses problems where there is coupling between distinct design parameters. For example, they may be expressed as mathematically coupled relationships between aerodynamic and structural interactions in aircraft structures, between thermal and structural interactions in nuclear plants, and between control considerations and structural interactions in flexible robots. These relationships provide analytical based frameworks leading to optimization problem formulations. However, in multidisciplinary design problems, information based interactions become more critical. Many times, the relationships between different design parameters are not amenable to analytical characterization. Under such circumstances, information based interactions will provide the best integration paradigm, i.e., there is a need to model the data entities and their dependencies between design parameters originating from different design agents. The modeling of such data interactions and dependencies forms the basis for integrating the various design agents.

Integration Framework of Process Planning based on Resource Independent Operation Summary to Support Collaborative Manufacturing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kulvatunyou, Boonserm; Wysk, Richard A.; Cho, Hyunbo

2004-06-01

In today's global manufacturing environment, manufacturing functions are distributed as never before. Design, engineering, fabrication, and assembly of new products are done routinely in many different enterprises scattered around the world. Successful business transactions require the sharing of design and engineering data on an unprecedented scale. This paper describes a framework that facilitates the collaboration of engineering tasks, particularly process planning and analysis, to support such globalized manufacturing activities. The information models of data and the software components that integrate those information models are described. The integration framework uses an Integrated Product and Process Data (IPPD) representation called a Resourcemore » Independent Operation Summary (RIOS) to facilitate the communication of business and manufacturing requirements. Hierarchical process modeling, process planning decomposition and an augmented AND/OR directed graph are used in this representation. The Resource Specific Process Planning (RSPP) module assigns required equipment and tools, selects process parameters, and determines manufacturing costs based on two-level hierarchical RIOS data. The shop floor knowledge (resource and process knowledge) and a hybrid approach (heuristic and linear programming) to linearize the AND/OR graph provide the basis for the planning. Finally, a prototype system is developed and demonstrated with an exemplary part. Java and XML (Extensible Markup Language) are used to ensure software and information portability.« less

The integration processing of the visual and auditory information in videos of real-world events: an ERP study.

PubMed

Liu, Baolin; Wang, Zhongning; Jin, Zhixing

2009-09-11

In real life, the human brain usually receives information through visual and auditory channels and processes the multisensory information, but studies on the integration processing of the dynamic visual and auditory information are relatively few. In this paper, we have designed an experiment, where through the presentation of common scenario, real-world videos, with matched and mismatched actions (images) and sounds as stimuli, we aimed to study the integration processing of synchronized visual and auditory information in videos of real-world events in the human brain, through the use event-related potentials (ERPs) methods. Experimental results showed that videos of mismatched actions (images) and sounds would elicit a larger P400 as compared to videos of matched actions (images) and sounds. We believe that the P400 waveform might be related to the cognitive integration processing of mismatched multisensory information in the human brain. The results also indicated that synchronized multisensory information would interfere with each other, which would influence the results of the cognitive integration processing.

Engineering Encounters: The Cat in the Hat Builds Satellites. A Unit Promoting Scientific Literacy and the Engineering Design Process

ERIC Educational Resources Information Center

Rehmat, Abeera P.; Owens, Marissa C.

2016-01-01

This column presents ideas and techniques to enhance your science teaching. This month's issue shares information about a unit promoting scientific literacy and the engineering design process. The integration of engineering with scientific practices in K-12 education can promote creativity, hands-on learning, and an improvement in students'…

Design and process aspects of laboratory scale SCF particle formation systems.

PubMed

Vemavarapu, Chandra; Mollan, Matthew J; Lodaya, Mayur; Needham, Thomas E

2005-03-23

Consistent production of solid drug materials of desired particle and crystallographic morphologies under cGMP conditions is a frequent challenge to pharmaceutical researchers. Supercritical fluid (SCF) technology gained significant attention in pharmaceutical research by not only showing a promise in this regard but also accommodating the principles of green chemistry. Given that this technology attained commercialization in coffee decaffeination and in the extraction of hops and other essential oils, a majority of the off-the-shelf SCF instrumentation is designed for extraction purposes. Only a selective few vendors appear to be in the early stages of manufacturing equipment designed for particle formation. The scarcity of information on the design and process engineering of laboratory scale equipment is recognized as a significant shortcoming to the technological progress. The purpose of this article is therefore to provide the information and resources necessary for startup research involving particle formation using supercritical fluids. The various stages of particle formation by supercritical fluid processing can be broadly classified into delivery, reaction, pre-expansion, expansion and collection. The importance of each of these processes in tailoring the particle morphology is discussed in this article along with presenting various alternatives to perform these operations.

Designing quantum information processing via structural physical approximation.

PubMed

Bae, Joonwoo

2017-10-01

In quantum information processing it may be possible to have efficient computation and secure communication beyond the limitations of classical systems. In a fundamental point of view, however, evolution of quantum systems by the laws of quantum mechanics is more restrictive than classical systems, identified to a specific form of dynamics, that is, unitary transformations and, consequently, positive and completely positive maps to subsystems. This also characterizes classes of disallowed transformations on quantum systems, among which positive but not completely maps are of particular interest as they characterize entangled states, a general resource in quantum information processing. Structural physical approximation offers a systematic way of approximating those non-physical maps, positive but not completely positive maps, with quantum channels. Since it has been proposed as a method of detecting entangled states, it has stimulated fundamental problems on classifications of positive maps and the structure of Hermitian operators and quantum states, as well as on quantum measurement such as quantum design in quantum information theory. It has developed efficient and feasible methods of directly detecting entangled states in practice, for which proof-of-principle experimental demonstrations have also been performed with photonic qubit states. Here, we present a comprehensive review on quantum information processing with structural physical approximations and the related progress. The review mainly focuses on properties of structural physical approximations and their applications toward practical information applications.

Designing quantum information processing via structural physical approximation

NASA Astrophysics Data System (ADS)

Bae, Joonwoo

2017-10-01

In quantum information processing it may be possible to have efficient computation and secure communication beyond the limitations of classical systems. In a fundamental point of view, however, evolution of quantum systems by the laws of quantum mechanics is more restrictive than classical systems, identified to a specific form of dynamics, that is, unitary transformations and, consequently, positive and completely positive maps to subsystems. This also characterizes classes of disallowed transformations on quantum systems, among which positive but not completely maps are of particular interest as they characterize entangled states, a general resource in quantum information processing. Structural physical approximation offers a systematic way of approximating those non-physical maps, positive but not completely positive maps, with quantum channels. Since it has been proposed as a method of detecting entangled states, it has stimulated fundamental problems on classifications of positive maps and the structure of Hermitian operators and quantum states, as well as on quantum measurement such as quantum design in quantum information theory. It has developed efficient and feasible methods of directly detecting entangled states in practice, for which proof-of-principle experimental demonstrations have also been performed with photonic qubit states. Here, we present a comprehensive review on quantum information processing with structural physical approximations and the related progress. The review mainly focuses on properties of structural physical approximations and their applications toward practical information applications.

Application of TRIZ Methodology in Diffusion Welding System Optimization

NASA Astrophysics Data System (ADS)

Ravinder Reddy, N.; Satyanarayana, V. V.; Prashanthi, M.; Suguna, N.

2017-12-01

Welding is tremendously used in metal joining processes in the manufacturing process. In recent years, diffusion welding method has significantly increased the quality of a weld. Nevertheless, diffusion welding has some extent short research and application progress. Therefore, diffusion welding has a lack of relevant information, concerned with the joining of thick and thin materials with or without interlayers, on welding design such as fixture, parameters selection and integrated design. This article intends to combine innovative methods in the application of diffusion welding design. This will help to decrease trial and error or failure risks in the welding process being guided by the theory of inventive problem solving (TRIZ) design method. This article hopes to provide welding design personnel with innovative design ideas under research and for practical application.

Word Processing. A Handbook for Business Teachers.

ERIC Educational Resources Information Center

Stewart, Jeffrey R., Jr., Ed.

This handbook is designed to provide information to help teachers keep abreast of changes in word processing and to develop necessary teaching skills. The handbook is divided into two main parts: understanding word processing and teaching word processing skills. In the introduction the part word processing plays in the business scheme of a company…

OpenPET: A Flexible Electronics System for Radiotracer Imaging

NASA Astrophysics Data System (ADS)

Moses, W. W.; Buckley, S.; Vu, C.; Peng, Q.; Pavlov, N.; Choong, W.-S.; Wu, J.; Jackson, C.

2010-10-01

We present the design for OpenPET, an electronics readout system designed for prototype radiotracer imaging instruments. The critical requirements are that it has sufficient performance, channel count, channel density, and power consumption to service a complete camera, and yet be simple, flexible, and customizable enough to be used with almost any detector or camera design. An important feature of this system is that each analog input is processed independently. Each input can be configured to accept signals of either polarity as well as either differential or ground referenced signals. Each signal is digitized by a continuously sampled ADC, which is processed by an FPGA to extract pulse height information. A leading edge discriminator creates a timing edge that is “time stamped” by a TDC implemented inside the FPGA. This digital information from each channel is sent to an FPGA that services 16 analog channels, and information from multiple channels is processed by this FPGA to perform logic for crystal lookup, DOI calculation, calibration, etc. As all of this processing is controlled by firmware and software, it can be modified/customized easily. The system is open source, meaning that all technical data (specifications, schematics and board layout files, source code, and instructions) will be publicly available.

Eye-Tracking Measures Reveal How Changes in the Design of Aided AAC Displays Influence the Efficiency of Locating Symbols by School-Age Children without Disabilities

ERIC Educational Resources Information Center

Wilkinson, Krista M.; O'Neill, Tara; McIlvane, William J.

2014-01-01

Purpose: Many individuals with communication impairments use aided augmentative and alternative communication (AAC) systems involving letters, words, or line drawings that rely on the visual modality. It seems reasonable to suggest that display design should incorporate information about how users attend to and process visual information. The…

Waste Management Information System (WMIS) User Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

R. E. Broz

2008-12-22

This document provides the user of the Waste Management Information System (WMIS) instructions on how to use the WMIS software. WMIS allows users to initiate, track, and close waste packages. The modular design supports integration and utilization of data throuh the various stages of waste management. The phases of the waste management work process include generation, designation, packaging, container management, procurement, storage, treatment, transportation, and disposal.

Information services and information processing

NASA Technical Reports Server (NTRS)

1975-01-01

Attempts made to design and extend space system capabilities are reported. Special attention was given to establishing user needs for information or services which might be provided by space systems. Data given do not attempt to detail scientific, technical, or economic bases for the needs expressed by the users.

Thinking about the weather: How display salience and knowledge affect performance in a graphic inference task.

PubMed

Hegarty, Mary; Canham, Matt S; Fabrikant, Sara I

2010-01-01

Three experiments examined how bottom-up and top-down processes interact when people view and make inferences from complex visual displays (weather maps). Bottom-up effects of display design were investigated by manipulating the relative visual salience of task-relevant and task-irrelevant information across different maps. Top-down effects of domain knowledge were investigated by examining performance and eye fixations before and after participants learned relevant meteorological principles. Map design and knowledge interacted such that salience had no effect on performance before participants learned the meteorological principles; however, after learning, participants were more accurate if they viewed maps that made task-relevant information more visually salient. Effects of display design on task performance were somewhat dissociated from effects of display design on eye fixations. The results support a model in which eye fixations are directed primarily by top-down factors (task and domain knowledge). They suggest that good display design facilitates performance not just by guiding where viewers look in a complex display but also by facilitating processing of the visual features that represent task-relevant information at a given display location. (PsycINFO Database Record (c) 2009 APA, all rights reserved).

Social Information-Processing Skills and Aggression: A Quasi-Experimental Trial of the Making Choices and Making Choices Plus Programs

ERIC Educational Resources Information Center

Terzian, Mary A.; Li, Jilan; Fraser, Mark W.; Day, Steven H.; Rose, Roderick A.

2015-01-01

This article describes the findings from an efficacy trial of a school-based, universal prevention program designed to reduce aggressive behavior of by strengthening emotion regulation and social information-processing (SIP) skills. Three cohorts of third graders (N = 479) participated in this study. The first cohort participated in the Making…

Strengthening the Social Information-Processing Skills of Children: A Controlled Test of the "Let's Be Friends" Program in China

ERIC Educational Resources Information Center

Wu, Fan; Fraser, Mark W.; Guo, Shenyang; Day, Steven H.; Galinsky, Maeda J.

2016-01-01

Objective: The study had two objectives (a) to adapt for Chinese children an intervention designed to strengthen the social information--processing (SIP) skills of children in the United States, and (b) to pilot test the adapted intervention in China. Methods: Adaptation of the "Making Choices" program involved reviewing Chinese…

Using Computers in Educational and Psychological Research: Using Information Technolgies to Support the Research Process

ERIC Educational Resources Information Center

Willis, Jerry; Kim, Seung H.

2006-01-01

This book has been designed to assist researchers in the social sciences and education fields who are interested in learning how information technologies can help them successfully navigate the research process. Most researchers are familiar with the use of programs like SPSS to analyze data, but many are not aware of other ways information…

A Corpus-Based Discourse Information Analysis of Chinese EFL Learners' Autonomy in Legal Case Brief Writing

ERIC Educational Resources Information Center

Chen, Jinshi

2017-01-01

Legal case brief writing is pedagogically important yet insufficiently discussed for Chinese EFL learners majoring in law. Based on process genre approach and discourse information theory (DIT), the present study designs a corpus-based analytical model for Chinese EFL learners' autonomy in legal case brief writing and explores the process of case…

The use of analytical models in human-computer interface design

NASA Technical Reports Server (NTRS)

Gugerty, Leo

1993-01-01

Recently, a large number of human-computer interface (HCI) researchers have investigated building analytical models of the user, which are often implemented as computer models. These models simulate the cognitive processes and task knowledge of the user in ways that allow a researcher or designer to estimate various aspects of an interface's usability, such as when user errors are likely to occur. This information can lead to design improvements. Analytical models can supplement design guidelines by providing designers rigorous ways of analyzing the information-processing requirements of specific tasks (i.e., task analysis). These models offer the potential of improving early designs and replacing some of the early phases of usability testing, thus reducing the cost of interface design. This paper describes some of the many analytical models that are currently being developed and evaluates the usefulness of analytical models for human-computer interface design. This paper will focus on computational, analytical models, such as the GOMS model, rather than less formal, verbal models, because the more exact predictions and task descriptions of computational models may be useful to designers. The paper also discusses some of the practical requirements for using analytical models in complex design organizations such as NASA.

A Large-Scale Design Integration Approach Developed in Conjunction with the Ares Launch Vehicle Program

NASA Technical Reports Server (NTRS)

Redmon, John W.; Shirley, Michael C.; Kinard, Paul S.

2012-01-01

This paper presents a method for performing large-scale design integration, taking a classical 2D drawing envelope and interface approach and applying it to modern three dimensional computer aided design (3D CAD) systems. Today, the paradigm often used when performing design integration with 3D models involves a digital mockup of an overall vehicle, in the form of a massive, fully detailed, CAD assembly; therefore, adding unnecessary burden and overhead to design and product data management processes. While fully detailed data may yield a broad depth of design detail, pertinent integration features are often obscured under the excessive amounts of information, making them difficult to discern. In contrast, the envelope and interface method results in a reduction in both the amount and complexity of information necessary for design integration while yielding significant savings in time and effort when applied to today's complex design integration projects. This approach, combining classical and modern methods, proved advantageous during the complex design integration activities of the Ares I vehicle. Downstream processes, benefiting from this approach by reducing development and design cycle time, include: Creation of analysis models for the Aerodynamic discipline; Vehicle to ground interface development; Documentation development for the vehicle assembly.

30 CFR 937.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and rith the February 26, 1980, May 16, 1980, and...

30 CFR 937.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and rith the February 26, 1980, May 16, 1980, and...

30 CFR 937.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and rith the February 26, 1980, May 16, 1980, and...

30 CFR 937.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and rith the February 26, 1980, May 16, 1980, and...

30 CFR 937.764 - Process for designating areas unsuitable for surface coal mining operations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions, data base and inventory systems, public information, and rith the February 26, 1980, May 16, 1980, and...

FEATURES, EVENTS, AND PROCESSES: SYSTEM-LEVEL AND CRITICALITY

DOE Office of Scientific and Technical Information (OSTI.GOV)

D.L. McGregor

The primary purpose of this Analysis/Model Report (AMR) is to identify and document the screening analyses for the features, events, and processes (FEPs) that do not easily fit into the existing Process Model Report (PMR) structure. These FEPs include the 3 1 FEPs designated as System-Level Primary FEPs and the 22 FEPs designated as Criticality Primary FEPs. A list of these FEPs is provided in Section 1.1. This AMR (AN-WIS-MD-000019) documents the Screening Decision and Regulatory Basis, Screening Argument, and Total System Performance Assessment (TSPA) Disposition for each of the subject Primary FEPs. This AMR provides screening information and decisionsmore » for the TSPA-SR report and provides the same information for incorporation into a project-specific FEPs database. This AMR may also assist reviewers during the licensing-review process.« less

Spatial information technologies for remote sensing today and tomorrow; Proceedings of the Ninth Pecora Symposium, Sioux Falls, SD, October 2-4, 1984

NASA Technical Reports Server (NTRS)

1984-01-01

Topics discussed at the symposium include hardware, geographic information system (GIS) implementation, processing remotely sensed data, spatial data structures, and NASA programs in remote sensing information systems. Attention is also given GIS applications, advanced techniques, artificial intelligence, graphics, spatial navigation, and classification. Papers are included on the design of computer software for geographic image processing, concepts for a global resource information system, algorithm development for spatial operators, and an application of expert systems technology to remotely sensed image analysis.

Process Security in Chemical Engineering Education

ERIC Educational Resources Information Center

Piluso, Cristina; Uygun, Korkut; Huang, Yinlun; Lou, Helen H.

2005-01-01

The threats of terrorism have greatly alerted the chemical process industries to assure plant security at all levels: infrastructure-improvement-focused physical security, information-protection-focused cyber security, and design-and-operation-improvement-focused process security. While developing effective plant security methods and technologies…

Cognitive considerations for helmet-mounted display design

NASA Astrophysics Data System (ADS)

Francis, Gregory; Rash, Clarence E.

2010-04-01

Helmet-mounted displays (HMDs) are designed as a tool to increase performance. To achieve this, there must be an accurate transfer of information from the HMD to the user. Ideally, an HMD would be designed to accommodate the abilities and limitations of users' cognitive processes. It is not enough for the information (whether visual, auditory, or tactual) to be displayed; the information must be perceived, attended, remembered, and organized in a way that guides appropriate decision-making, judgment, and action. Following a general overview, specific subtopics of cognition, including perception, attention, memory, knowledge, decision-making, and problem solving are explored within the context of HMDs.

A Design Support Framework through Dynamic Deployment of Hypothesis and Verification in the Design Process

NASA Astrophysics Data System (ADS)

Nomaguch, Yutaka; Fujita, Kikuo

This paper proposes a design support framework, named DRIFT (Design Rationale Integration Framework of Three layers), which dynamically captures and manages hypothesis and verification in the design process. A core of DRIFT is a three-layered design process model of action, model operation and argumentation. This model integrates various design support tools and captures design operations performed on them. Action level captures the sequence of design operations. Model operation level captures the transition of design states, which records a design snapshot over design tools. Argumentation level captures the process of setting problems and alternatives. The linkage of three levels enables to automatically and efficiently capture and manage iterative hypothesis and verification processes through design operations over design tools. In DRIFT, such a linkage is extracted through the templates of design operations, which are extracted from the patterns embeded in design tools such as Design-For-X (DFX) approaches, and design tools are integrated through ontology-based representation of design concepts. An argumentation model, gIBIS (graphical Issue-Based Information System), is used for representing dependencies among problems and alternatives. A mechanism of TMS (Truth Maintenance System) is used for managing multiple hypothetical design stages. This paper also demonstrates a prototype implementation of DRIFT and its application to a simple design problem. Further, it is concluded with discussion of some future issues.

Defining Support Requirements During Conceptual Design of Reusable Launch Vehicles

NASA Technical Reports Server (NTRS)

Morris, W. D.; White, N. H.; Davis, W. T.; Ebeling, C. E.

1995-01-01

Current methods for defining the operational support requirements of new systems are data intensive and require significant design information. Methods are being developed to aid in the analysis process of defining support requirements for new launch vehicles during their conceptual design phase that work with the level of information available during this phase. These methods will provide support assessments based on the vehicle design and the operating scenarios. The results can be used both to define expected support requirements for new launch vehicle designs and to help evaluate the benefits of using new technologies. This paper describes the models, their current status, and provides examples of their use.

PREFACE: Quantum information processing

NASA Astrophysics Data System (ADS)

Briggs, Andrew; Ferry, David; Stoneham, Marshall

2006-05-01

Microelectronics and the classical information technologies transformed the physics of semiconductors. Photonics has given optical materials a new direction. Quantum information technologies, we believe, will have immense impact on condensed matter physics. The novel systems of quantum information processing need to be designed and made. Their behaviours must be manipulated in ways that are intrinsically quantal and generally nanoscale. Both in this special issue and in previous issues (see e.g., Spiller T P and Munro W J 2006 J. Phys.: Condens. Matter 18 V1-10) we see the emergence of new ideas that link the fundamentals of science to the pragmatism of market-led industry. We hope these papers will be followed by many others on quantum information processing in the Journal of Physics: Condensed Matter.

Engineering data compendium. Human perception and performance, volume 3

NASA Technical Reports Server (NTRS)

Boff, Kenneth R. (Editor); Lincoln, Janet E. (Editor)

1988-01-01

The concept underlying the Engineering Data Compendium was the product of a research and development program (Integrated Perceptual Information for Designers project) aimed at facilitating the application of basic research findings in human performance to the design of military crew systems. The principal objective was to develop a workable strategy for: (1) identifying and distilling information of potential value to system design from existing research literature, and (2) presenting this technical information in a way that would aid its accessibility, interpretability, and applicability by system designers. The present four volumes of the Engineering Data Compendium represent the first implementation of this strategy. This is Volume 3, containing sections on Human Language Processing, Operator Motion Control, Effects of Environmental Stressors, Display Interfaces, and Control Interfaces (Real/Virtual).

Integrated Information Support System (IISS). Volume 8. User Interface Subsystem. Part 3. User Interface Services Product Specification.

DTIC Science & Technology

1985-11-01

User Interface that consists of a set of callable execution time routines available to an application program for form processing . IISS Function Screen...provisions for test consists of the normal testing techniques that are accomplished during the construction process . They consist of design and code...application presents a form * to the user which must be filled in with information for processing by that application. The application then

Integration of design information

NASA Technical Reports Server (NTRS)

Anderton, G. L.

1980-01-01

The overall concepts of the integrated programs for aerospace-vehicle design (IPAD) from the user's viewpoint are discussed. Also a top-level view of what the user requires from such a system is provided, and the interactions between the system and user are described. The four major components discussed are design process; data storage, management and manipulation; user interface; and project management. Although an outgrowth of aerospace production experience, the basic concepts discussed, and especially their emphasis on integration, are considered applicable to all problem solving. Thus, these concepts may offer a broad base for exploitation by industry in general. This is the first in a set of three papers, the other two being Future Integrated Design Process, by D. D. Mayer, and Requirements for Company-Wide Management of Engineering Information, by J. W. Southall. In addition to tying the three together, how project management can be handled in a computing environment and also the user interface needs are discussed in detail.

Designable DNA-binding domains enable construction of logic circuits in mammalian cells.

PubMed

Gaber, Rok; Lebar, Tina; Majerle, Andreja; Šter, Branko; Dobnikar, Andrej; Benčina, Mojca; Jerala, Roman

2014-03-01

Electronic computer circuits consisting of a large number of connected logic gates of the same type, such as NOR, can be easily fabricated and can implement any logic function. In contrast, designed genetic circuits must employ orthogonal information mediators owing to free diffusion within the cell. Combinatorial diversity and orthogonality can be provided by designable DNA- binding domains. Here, we employed the transcription activator-like repressors to optimize the construction of orthogonal functionally complete NOR gates to construct logic circuits. We used transient transfection to implement all 16 two-input logic functions from combinations of the same type of NOR gates within mammalian cells. Additionally, we present a genetic logic circuit where one input is used to select between an AND and OR function to process the data input using the same circuit. This demonstrates the potential of designable modular transcription factors for the construction of complex biological information-processing devices.

Cultivating Peace through Design Thinking: Problem Solving with PAST Foundation

ERIC Educational Resources Information Center

Deaner, Kat; McCreery-Kellert, Heather

2018-01-01

Design thinking is a methodology that emphasizes reasoning and decision-making as part of the problem-solving process. It is a structured framework for identifying challenges, gathering information, generating potential solutions, refining ideas, and testing solutions. Design thinking offers valuable skills that will serve students well as they…

Alternative Instructional Strategies in an IS Curriculum

ERIC Educational Resources Information Center

Parker, Kevin R.; LeRouge, Cynthia; Trimmer, Ken

2005-01-01

Systems Analysis and Design is a core component of an education in information systems. To appeal to a wider range of constituents and facilitate the learning process, the content of a traditional Systems Analysis and Design course has been supplemented with an alternative modeling approach. This paper presents an instructional design that…

Reflective Subjects in Kant and Architectural Design Education

ERIC Educational Resources Information Center

Rawes, Peg

2007-01-01

In architectural design education, students develop drawing, conceptual, and critical skills which are informed by their ability to reflect upon the production of ideas in design processes and in the urban, environmental, social, historical, and cultural context that define architecture and the built environment. Reflective actions and thinking…

Optimal Experimental Design for Model Discrimination

PubMed Central

Myung, Jay I.; Pitt, Mark A.

2009-01-01

Models of a psychological process can be difficult to discriminate experimentally because it is not easy to determine the values of the critical design variables (e.g., presentation schedule, stimulus structure) that will be most informative in differentiating them. Recent developments in sampling-based search methods in statistics make it possible to determine these values, and thereby identify an optimal experimental design. After describing the method, it is demonstrated in two content areas in cognitive psychology in which models are highly competitive: retention (i.e., forgetting) and categorization. The optimal design is compared with the quality of designs used in the literature. The findings demonstrate that design optimization has the potential to increase the informativeness of the experimental method. PMID:19618983

Regression analysis as a design optimization tool

NASA Technical Reports Server (NTRS)

Perley, R.

1984-01-01

The optimization concepts are described in relation to an overall design process as opposed to a detailed, part-design process where the requirements are firmly stated, the optimization criteria are well established, and a design is known to be feasible. The overall design process starts with the stated requirements. Some of the design criteria are derived directly from the requirements, but others are affected by the design concept. It is these design criteria that define the performance index, or objective function, that is to be minimized within some constraints. In general, there will be multiple objectives, some mutually exclusive, with no clear statement of their relative importance. The optimization loop that is given adjusts the design variables and analyzes the resulting design, in an iterative fashion, until the objective function is minimized within the constraints. This provides a solution, but it is only the beginning. In effect, the problem definition evolves as information is derived from the results. It becomes a learning process as we determine what the physics of the system can deliver in relation to the desirable system characteristics. As with any learning process, an interactive capability is a real attriubute for investigating the many alternatives that will be suggested as learning progresses.

Information management advanced development. Volume 1: Summary

NASA Technical Reports Server (NTRS)

Gerber, C. R.

1972-01-01

The information management systems designed for the modular space station are discussed. Subjects presented are: (1) communications terminal breadboard configuration, (2) digital data bus breadboard configuration, (3) data processing assembly definition, and (4) computer program (software) assembly definition.

ATC automation concepts

NASA Technical Reports Server (NTRS)

Erzberger, Heinz

1990-01-01

Information on the design of human-centered tools for terminal area air traffic control (ATC) is given in viewgraph form. Information is given on payoffs and products, guidelines, ATC as a team process, automation tools for ATF, and the traffic management advisor.

ARSENIC TREATMENT BY ADSORPTIVE TECHNOLOGY

EPA Science Inventory

Presentation will discuss the removal of arsenic from drinking water using the adsorptive media treatment process. Fundamental information is provided on the design and operation of adsorptive media technology including the selection of the adsorptive media. The information cites...

The Design of Akhmat Tower

NASA Astrophysics Data System (ADS)

Beardsley, Sara; Stochetti, Alejandro; Cerone, Marc

2018-03-01

Akhmat Tower is a 435m supertall building designed by Adrian Smith + Gordon Gill Architecture. It is currently under construction in the city of Grozny, in the Chechen Republic, in the North Caucasus region of Russia. The design of the tower was done during a collaborative process by a multi-disciplinary architectural and engineering team, based primarily in the United States and Russia. During this process, the designers considered many factors including, most primarily, the cultural and historical context, the structural requirements given the high seismicity of the region, and the client's programmatic needs. The resulting crystalline-shaped tower is both an aesthetic statement and a performative architectural solution which will be a new landmark for Chechnya. "The Design of Akhmat Tower" describes in detail the design process including structural considerations, exterior wall design, building program, interior design, the tuned mass damper, and the use of building information modeling.

[Design and implementation of mobile terminal data acquisition for Chinese materia medica resources survey].

PubMed

Qi, Yuan-Hua; Wang, Hui; Zhang, Xiao-Bo; Jin, Yan; Ge, Xiao-Guang; Jing, Zhi-Xian; Wang, Ling; Zhao, Yu-Ping; Guo, Lan-Ping; Huang, Lu-Qi

2017-11-01

In this paper, a data acquisition system based on mobile terminal combining GPS, offset correction, automatic speech recognition and database networking technology was designed implemented with the function of locating the latitude and elevation information fast, taking conveniently various types of Chinese herbal plant photos, photos, samples habitat photos and so on. The mobile system realizes automatic association with Chinese medicine source information, through the voice recognition function it records the information of plant characteristics and environmental characteristics, and record relevant plant specimen information. The data processing platform based on Chinese medicine resources survey data reporting client can effectively assists in indoor data processing, derives the mobile terminal data to computer terminal. The established data acquisition system provides strong technical support for the fourth national survey of the Chinese materia medica resources (CMMR). Copyright© by the Chinese Pharmaceutical Association.

The Naval Enlisted Professional Development Information System (NEPDIS): Front End Analysis (FEA) Process. Technical Report 159.

ERIC Educational Resources Information Center

Aagard, James A.; Ansbro, Thomas M.

The Naval Enlisted Professional Development Information System (NEPDIS) was designed to function as a fully computerized information assembly and analysis system to support labor force, personnel, and training management. The NEPDIS comprises separate training development, instructional, training record and evaluation, career development, and…

The role of ecological monitoring in managing wilderness

Treesearch

Peter B. Landres

1995-01-01

Good management requires good information. Monitoring provides this information when it is structured into the process of management, well designed and executed. As federal and state agencies strive to implement a management paradigm based on sustaining ecosystems, ecological information becomes a vital part of managing natural resources. Inventory and monitoring...

Management Information System Based on the Balanced Scorecard

ERIC Educational Resources Information Center

Kettunen, Juha; Kantola, Ismo

2005-01-01

Purpose: This study seeks to describe the planning and implementation in Finland of a campus-wide management information system using a rigorous planning methodology. Design/methodology/approach: The structure of the management information system is planned on the basis of the management process, where strategic management and the balanced…

Innovative Didactic Designs: Visual Analytics and Visual Literacy in School

ERIC Educational Resources Information Center

Stenliden, Linnéa; Nissen, Jörgen; Bodén, Ulrika

2017-01-01

In a world of massively mediated information and communication, students must learn to handle rapidly growing information volumes inside and outside school. Pedagogy attuned to processing this growing production and communication of information is needed. However, ordinary educational models often fail to support students, trialing neither…

Assessment of visual communication by information theory

NASA Astrophysics Data System (ADS)

Huck, Friedrich O.; Fales, Carl L.

1994-01-01

This assessment of visual communication integrates the optical design of the image-gathering device with the digital processing for image coding and restoration. Results show that informationally optimized image gathering ordinarily can be relied upon to maximize the information efficiency of decorrelated data and the visual quality of optimally restored images.

System Description and Status Report: California Education Information System.

ERIC Educational Resources Information Center

California State Dept. of Education, Sacramento.

The California Education Information System (CEIS) consists of two subsystems of computer programs designed to process business and pupil data for local school districts. Creating and maintaining records concerning the students in the schools, the pupil subsystem provides for a central repository of school district identification information and a…

Biological effect of low-head sea lamprey barriers: Designs for extensive surveys and the value of incorporating intensive process-oriented research

USGS Publications Warehouse

Hayes, D.B.; Baylis, J.R.; Carl, L.M.; Dodd, H.R.; Goldstein, J.D.; McLaughlin, R.L.; Noakes, D.L.G.; Porto, L.M.

2003-01-01

Four sampling designs for quantifying the effect of low-head sea lamprey (Petromyzon marinus) barriers on fish communities were evaluated, and the contribution of process-oriented research to the overall confidence of results obtained was discussed. The designs include: (1) sample barrier streams post-construction; (2) sample barrier and reference streams post-construction; (3) sample barrier streams pre- and post-construction; and (4) sample barrier and reference streams pre- and post-construction. In the statistical literature, the principal basis for comparison of sampling designs is generally the precision achieved by each design. In addition to precision, designs should be compared based on the interpretability of results and on the scale to which the results apply. Using data collected in a broad survey of streams with and without sea lamprey barriers, some of the tradeoffs that occur among precision, scale, and interpretability are illustrated. Although circumstances such as funding and availability of pre-construction data may limit which design can be implemented, a pre/post-construction design including barrier and reference streams provides the most meaningful information for use in barrier management decisions. Where it is not feasible to obtain pre-construction data, a design including reference streams is important to maintain the interpretability of results. Regardless of the design used, process-oriented research provides a framework for interpreting results obtained in broad surveys. As such, information from both extensive surveys and intensive process-oriented research provides the best basis for fishery management actions, and gives researchers and managers the most confidence in the conclusions reached regarding the effects of sea lamprey barriers.

A proposed model to conduct process and outcome evaluations and implementation research of child health programs in Africa using integrated community case management as an example.

PubMed

Diaz, Theresa; Guenther, Tanya; Oliphant, Nicholas P; Muñiz, Maria

2014-12-01

To use a newly devised set of criteria to review the study design and scope of collection of process, outcomes and contextual data for evaluations and implementation research of integrated community case management (iCCM) in Sub-Saharan African. We examined 24 program evaluations and implementation research studies of iCCM in sub-Saharan Africa conducted in the last 5 years (2008-2013), assessed the design used and categorized them according to whether or not they collected sufficient information to conduct process and outcome evaluations. Five of the 24 studies used a stepped wedge design and two were randomized control trials. The remaining 17 were quasi-experimental of which 10 had comparison areas; however, not all comparison areas had a pre and post household survey. With regard to process data, 22 of the studies collected sufficient information to report on implementation strength, and all, except one, could report on program implementation. Most common missing data elements were health facility treatments, service costs, and qualitative data to assess demand. For the measurement of program outcomes, 7 of the 24 studies had a year or less of implementation at scale before the endline survey, 6 of the household surveys did not collect point of service, 10 did not collect timeliness (care seeking within 24 hours of symptoms) and 12 did not have socioeconomic (SES) information. Among the 16 studies with comparison areas, only 5 randomly selected comparison areas, while 10 had appropriate comparison areas. Several evaluations were done too soon after implementation, lacked information on health facility treatments, costs, demand, timeliness or SES and/or did not have a counterfactual. We propose several study designs and minimal data elements to be collected to provide sufficient information to assess whether iCCM increased timely coverage of treatment for the neediest children in a cost-efficient manner.

Applying User Input to the Design and Testing of an Electronic Behavioral Health Information System for Wraparound Care Coordination

PubMed Central

Bruns, Eric J.; Hyde, Kelly L.; Sather, April; Hook, Alyssa; Lyon, Aaron R.

2015-01-01

Health information technology (HIT) and care coordination for individuals with complex needs are high priorities for quality improvement in health care. However, there is little empirical guidance about how best to design electronic health record systems and related technologies to facilitate implementation of care coordination models in behavioral health, or how best to apply user input to the design and testing process. In this paper, we describe an iterative development process that incorporated user/stakeholder perspectives at multiple points and resulted in an electronic behavioral health information system (EBHIS) specific to the wraparound care coordination model for youth with serious emotional and behavioral disorders. First, we review foundational HIT research on how EBHIS can enhance efficiency and outcomes of wraparound that was used to inform development. After describing the rationale for and functions of a prototype EBHIS for wraparound, we describe methods and results for a series of six small studies that informed system development across four phases of effort – predevelopment, development, initial user testing, and commercialization – and discuss how these results informed system design and refinement. Finally, we present next steps, challenges to dissemination, and guidance for others aiming to develop specialized behavioral health HIT. The research team's experiences reinforce the opportunity presented by EBHIS to improve care coordination for populations with complex needs, while also pointing to a litany of barriers and challenges to be overcome to implement such technologies. PMID:26060099