Gender and Women Development Initiatives in Bangladesh: A Study of Rural Mother Center.

PubMed

Karim, K M Rabiul; Emmelin, Maria; Lindberg, Lene; Wamala, Sarah

2016-01-01

Women-focused development initiatives have become a controversial issue connected with women's health and welfare. Previous studies indicated that development initiatives might increase women's workload, family conflict, and marital violence. This study explored the gendered characteristics of a development initiative Rural Mother Center in Bangladesh. Data incorporated policy document and interviews of social workers working with the mother centers in two northwest subdistricts. The qualitative content analysis of data emerged a general theme of expanding women's responsibility while maintaining male privilege explaining gendered design and practice of the development initiative. The theme was supported by two gendered categories related to the design: (a) essentializing women's participation; (b) maintaining traditional gender, and four categories related to the practice; (c) inadequate gender knowledge and skills; (d) reinforcing traditional gender; (e) using women for improving office performance; and (f) upholding male privilege. The study suggests that though women-focused development initiatives need to be embraced with gender-redistributive policies, the social workers should be trained for attaining gender-transformative motivation and competencies.

Baseline antenna design for space exploration initiative

NASA Technical Reports Server (NTRS)

Chen, Y. L.; Nasir, M. A.; Lee, S. W.; Zaman, Afroz

1993-01-01

A key element of the future NASA Space Exploration Initiative (SEI) mission is the lunar and Mars telecommunication system. This system will provide voice, image, and data transmission to monitor unmanned missions to conduct experiments, and to provide radiometric data for navigation. In the later half of 1991, a study was conducted on antennas for the Mars Exploration Communication. Six antenna configurations were examined: three reflector and three phased array. The conclusion was that due to wide-angle scan requirement, and multiple simultaneous tracking beams, phased arrays are more suitable. For most part, this report studies phased array antenna designs for two different applications for Space Exploration Initiative. It also studies one design for a tri-reflector type antenna. These antennas will be based on a Mars orbiting satellite.

Initial Development and Pilot Study Design of Interactive Lecture Demonstrations for ASTRO 101

NASA Astrophysics Data System (ADS)

Schwortz, Andria C.; French, D. A; Gutierrez, Joseph V; Sanchez, Richard L; Slater, Timothy F.; Tatge, Coty

2014-06-01

Interactive lecture demonstrations (ILDs) have repeatedly shown to be effective tools for improving student achievement in the context of learning physics. As a first step toward systematic development of interactive lecture demonstrations in ASTRO 101, the introductory astronomy survey course, a systematic review of education research, describing educational computer simulations (ECSs) reveals that initial development requires a targeted study of how ASTRO 101 students respond to ECSs in the non-science majoring undergraduate lecture setting. In this project we have adopted the process by which ILDs were designed, pilot-tested, and successfully implemented in the context of physics teaching (Sokoloff & Thornton, 1997; Sokoloff & Thornton, 2004). We have designed the initial pilot-test set of ASTRO 101 ILD instructional materials relying heavily on ECSs. Both an instructor’s manual and a preliminary classroom-ready student workbook have been developed, and we are implementing a pilot study to explore their effectiveness in communicating scientific content, and the extent to which they might enhance students’ knowledge of and perception about astronomy and science in general. The study design uses a pre-/post-test quasi-experimental study design measuring students’ normalized gain scores, calculated as per Hake (1998) and Prather (2009), using a slightly modified version of S. Slater’s (2011) Test Of Astronomy STandards TOAST combined with other instruments. The results of this initial study will guide the iterative development of ASTRO 101 ILDs that are intended to both be effective at enhancing student achievement and easy for instructors to successfully implement.

Final definition and preliminary design study for the initial atmospheric cloud physics laboratory, a Spacelab mission payload

NASA Technical Reports Server (NTRS)

1976-01-01

The following areas related to the final definition and preliminary design study of the initial atmospheric cloud physics laboratory (ACPL) were covered: (1) proposal organization, personnel, schedule, and project management, (2) proposed configurations, (3) study objectives, (4) ACPL experiment program listing and description, (5) mission/flight flexibility and modularity/commonality, (6) study plan, and (7) description of following tasks: requirement analysis and definition task flow, systems analysis and trade studies, subsystem analysis and trade studies, specifications and interface control documents, preliminary design task flow, work breakdown structure, programmatic analysis and planning, and project costs. Finally, an overview of the scientific requirements was presented.

A methodological framework to support the initiation, design and institutionalization of participatory modeling processes in water resources management

NASA Astrophysics Data System (ADS)

Halbe, Johannes; Pahl-Wostl, Claudia; Adamowski, Jan

2018-01-01

Multiple barriers constrain the widespread application of participatory methods in water management, including the more technical focus of most water agencies, additional cost and time requirements for stakeholder involvement, as well as institutional structures that impede collaborative management. This paper presents a stepwise methodological framework that addresses the challenges of context-sensitive initiation, design and institutionalization of participatory modeling processes. The methodological framework consists of five successive stages: (1) problem framing and stakeholder analysis, (2) process design, (3) individual modeling, (4) group model building, and (5) institutionalized participatory modeling. The Management and Transition Framework is used for problem diagnosis (Stage One), context-sensitive process design (Stage Two) and analysis of requirements for the institutionalization of participatory water management (Stage Five). Conceptual modeling is used to initiate participatory modeling processes (Stage Three) and ensure a high compatibility with quantitative modeling approaches (Stage Four). This paper describes the proposed participatory model building (PMB) framework and provides a case study of its application in Québec, Canada. The results of the Québec study demonstrate the applicability of the PMB framework for initiating and designing participatory model building processes and analyzing barriers towards institutionalization.

Phase A design study of microgravity fluoride fiber puller

NASA Technical Reports Server (NTRS)

Workman, Gary L.; Smith, Guy A.; Kosten, Susan

1994-01-01

Improved transmission properties for fluoride fibers due to space processing has great potential for commercial benefits. Phase A design study will determine conceptual feasibility and provide initial definition of the technical requirements and design issues for space.

Application of Taguchi Design and Response Surface Methodology for Improving Conversion of Isoeugenol into Vanillin by Resting Cells of Psychrobacter sp. CSW4.

PubMed

Ashengroph, Morahem; Nahvi, Iraj; Amini, Jahanshir

2013-01-01

For all industrial processes, modelling, optimisation and control are the keys to enhance productivity and ensure product quality. In the current study, the optimization of process parameters for improving the conversion of isoeugenol to vanillin by Psychrobacter sp. CSW4 was investigated by means of Taguchi approach and Box-Behnken statistical design under resting cell conditions. Taguchi design was employed for screening the significant variables in the bioconversion medium. Sequentially, Box-Behnken design experiments under Response Surface Methodology (RSM) was used for further optimization. Four factors (isoeugenol, NaCl, biomass and tween 80 initial concentrations), which have significant effects on vanillin yield, were selected from ten variables by Taguchi experimental design. With the regression coefficient analysis in the Box-Behnken design, a relationship between vanillin production and four significant variables was obtained, and the optimum levels of the four variables were as follows: initial isoeugenol concentration 6.5 g/L, initial tween 80 concentration 0.89 g/L, initial NaCl concentration 113.2 g/L and initial biomass concentration 6.27 g/L. Under these optimized conditions, the maximum predicted concentration of vanillin was 2.25 g/L. These optimized values of the factors were validated in a triplicate shaking flask study and an average of 2.19 g/L for vanillin, which corresponded to a molar yield 36.3%, after a 24 h bioconversion was obtained. The present work is the first one reporting the application of Taguchi design and Response surface methodology for optimizing bioconversion of isoeugenol into vanillin under resting cell conditions.

HFIR Fuel Casting Support

DOE Office of Scientific and Technical Information (OSTI.GOV)

Imhoff, Seth D.; Gibbs, Paul Jacob; Solis, Eunice Martinez

Process exploration for fuel production for the High Flux Isotope Reactor (HFIR) using cast LEU-10wt.%Mo as an initial processing step has just begun. This project represents the first trials concerned with casting design and quality. The studies carried out over the course of this year and information contained in this report address the initial mold development to be used as a starting point for future operations. In broad terms, the final billet design is that of a solid rolling blank with an irregular octagonal cross section. The work covered here is a comprehensive view of the initial attempts to producemore » a sound casting. This report covers the efforts to simulate, predict, cast, inspect, and revise the initial mold design.« less

Designing an Automated Assessment of Public Speaking Skills Using Multimodal Cues

ERIC Educational Resources Information Center

Chen, Lei; Feng, Gary; Leong, Chee Wee; Joe, Jilliam; Kitchen, Christopher; Lee, Chong Min

2016-01-01

Traditional assessments of public speaking skills rely on human scoring. We report an initial study on the development of an automated scoring model for public speaking performances using multimodal technologies. Task design, rubric development, and human rating were conducted according to standards in educational assessment. An initial corpus of…

Online Course Design in a Programmatic Framework: A Case from Social Work

ERIC Educational Resources Information Center

Stewart, Patricia Lynn

2014-01-01

The focus of this study centers on the way instructors, and more specifically, instructors within a programmatic initiative, think about teaching and the decision-making process they employ to design learning experiences for an online environment. Often administrative initiatives do not consider the unique individual instructor needs when planning…

Exploring Career Agency during Self-Initiated Repatriation: A Study of Chinese Sea Turtles

ERIC Educational Resources Information Center

Guo, Chun; Porschitz, Emily T.; Alves, Jose

2013-01-01

Purpose: Drawing on career and self-initiated expatriation/repatriation literatures, this paper aims to examine the career experiences of Chinese self-initiated repatriates after their return to China. Design/methodology/approach: The authors conducted an exploratory, qualitative study involving in-depth interviews with 20 Chinese individuals who…

Initiating Event Analysis of a Lithium Fluoride Thorium Reactor

NASA Astrophysics Data System (ADS)

Geraci, Nicholas Charles

The primary purpose of this study is to perform an Initiating Event Analysis for a Lithium Fluoride Thorium Reactor (LFTR) as the first step of a Probabilistic Safety Assessment (PSA). The major objective of the research is to compile a list of key initiating events capable of resulting in failure of safety systems and release of radioactive material from the LFTR. Due to the complex interactions between engineering design, component reliability and human reliability, probabilistic safety assessments are most useful when the scope is limited to a single reactor plant. Thus, this thesis will study the LFTR design proposed by Flibe Energy. An October 2015 Electric Power Research Institute report on the Flibe Energy LFTR asked "what-if?" questions of subject matter experts and compiled a list of key hazards with the most significant consequences to the safety or integrity of the LFTR. The potential exists for unforeseen hazards to pose additional risk for the LFTR, but the scope of this thesis is limited to evaluation of those key hazards already identified by Flibe Energy. These key hazards are the starting point for the Initiating Event Analysis performed in this thesis. Engineering evaluation and technical study of the plant using a literature review and comparison to reference technology revealed four hazards with high potential to cause reactor core damage. To determine the initiating events resulting in realization of these four hazards, reference was made to previous PSAs and existing NRC and EPRI initiating event lists. Finally, fault tree and event tree analyses were conducted, completing the logical classification of initiating events. Results are qualitative as opposed to quantitative due to the early stages of system design descriptions and lack of operating experience or data for the LFTR. In summary, this thesis analyzes initiating events using previous research and inductive and deductive reasoning through traditional risk management techniques to arrive at a list of key initiating events that can be used to address vulnerabilities during the design phases of LFTR development.

NIH HEAL Initiative

MedlinePlus

... support services. The RFI seeks input on the design, study outcomes, and necessary partnerships and infrastructure for ... Institutes of Health hosted the HEALing Communities Study Design Workshop to solicit feedback from scientific experts, state ...

The kW power module evolution study: Executive summary

NASA Technical Reports Server (NTRS)

1979-01-01

Using the Marshall Space Flight Center 25 kW Power Module (PM) reference design as a point of departure, the study defined evolutionary growth paths to 100 kW and above. A recommended development approach and initial configurations were described. Specific hardware changes from the reference design are recommended for the initial PM configuration to ensure evolutionary growth, improved replicability, and reduced cost. Certain functional changes are also recommended to enhance system capabilities.

Evaluating a community-based program to improve healthcare quality: research design for the Aligning Forces for Quality initiative.

PubMed

Scanlon, Dennis P; Alexander, Jeffrey A; Beich, Jeff; Christianson, Jon B; Hasnain-Wynia, Romana; McHugh, Megan C; Mittler, Jessica N; Shi, Yunfeng; Bodenschatz, Laura J

2012-09-01

The Aligning Forces for Quality (AF4Q) initiative is the Robert Wood Johnson Foundation's (RWJF's) signature effort to increase the overall quality of healthcare in targeted communities throughout the country. In addition to sponsoring this 16-site, complex program, the RWJF funds an independent scientific evaluation to support objective research on the initiative's effectiveness and contributions to basic knowledge in 5 core programmatic areas. The research design, data, and challenges faced in the evaluation of this 10-year initiative are discussed. A descriptive overview of the evaluation research design for a multi-site, community based, healthcare quality improvement initiative is provided. The multiphase research design employed by the evaluation team is discussed. Evaluation provides formative feedback to the RWJF, participants, and other interested audiences in real time; develops approaches to assess innovative and under-studied interventions; furthers the analysis and understanding of effective community-based collaborative work in healthcare; and helps to differentiate the various facilitators, barriers, and contextual dimensions that affect the implementation and outcomes of community-based health interventions. The AF4Q initiative is arguably the largest community-level healthcare improvement demonstration in the United States to date; it is being implemented at a time of rapid change in national healthcare policy. The implementation of large-scale, multi-site initiatives is becoming an increasingly common approach for addressing problems in healthcare. The evaluation research design for the AF4Q initiative, and the lessons learned from its approach, may be valuable to others tasked with evaluating similar community-based initiatives.

CERN IT Book Fair 2009 - Special talk by Bjarne Stroustrup: "The Design of C++0x"

ScienceCinema

Stroustrup, Bjarne

2018-05-24

A draft for a revised ISO C++ standard, C++0x, has been produced. The speaker will present the background of C++, its aims, the standards process (with opinions), some of the guiding design principles (with tiny code examples), and two case studies.The case studies are initialization (a general and uniform syntax and semantics for initializers in all contexts) and concurrent support facilities (memory model, threads, locks, futures).

Expert Recommender: Designing for a Network Organization

NASA Astrophysics Data System (ADS)

Reichling, Tim; Veith, Michael; Wulf, Volker

Recent knowledge management initiatives focus on expertise sharing within formal organizational units and informal communities of practice. Expert recommender systems seem to be a promising tool in support of these initiatives. This paper presents experiences in designing an expert recommender system for a knowledge- intensive organization, namely the National Industry Association (NIA). Field study results provide a set of specific design requirements. Based on these requirements, we have designed an expert recommender system which is integrated into the specific software infrastructure of the organizational setting. The organizational setting is, as we will show, specific for historical, political, and economic reasons. These particularities influence the employees’ organizational and (inter-)personal needs within this setting. The paper connects empirical findings of a long-term case study with design experiences of an expertise recommender system.

Initiation of movement and energy expenditure in children with developmental delay: a case-control study.

PubMed

Chen, Chiao-Nan Joyce; Hwang, Ai-Wen; Lin, Shang-Ying; Lin, Yu-Chieh

2014-10-01

Lower levels of physical activity in children with developmental delay (DD) usually are attributed to higher energy costs. However, there is no evidence that children with DD spend more energy on daily physical activities, such as walking. The aim of this study was to compare energy costs during walking and movement initiation times in children with DD and children with typical development (TD) and matched for age. This was a case-control study. Children who were 3 and 5 years old and had DD (n=12) or TD (n=12) participated in the study. Measurements included ranges of motion in the lower extremities, physiological costs of walking, and movement initiation times. A task designed to evaluate the initiation of movement (the "go play with the toy" task) was used to examine the reaction times for children's goal-directed walking. The physiological costs of walking were similar in the 2 groups; however, children with DD walked at a lower speed than children with TD. Importantly, children with DD took more time to initiate goal-directed walking. The nature of the study design limited causal inference from the results. Children who were 3 to 5 years old and had DD had delays in goal-directed movement that may not have been attributable to motor impairments. The findings suggest that therapists should evaluate the movement initiation ability of 3- to 5-year-old children with DD as part of the design of an overall intervention plan. © 2014 American Physical Therapy Association.

Using the DSAP Framework to Guide Instructional Design and Technology Integration in BYOD Classrooms

ERIC Educational Resources Information Center

Wasko, Christopher W.

2016-01-01

The purpose of this study was to determine the suitability of the DSAP Framework to guide instructional design and technology integration for teachers piloting a BYOD (Bring Your Own Device) initiative and to measure the impact the initiative had on the amount and type of technology used in pilot classrooms. Quantitative and qualitative data were…

Associations between a voluntary restaurant menu designation initiative and patron purchasing behavior.

PubMed

Sosa, Erica T; Biediger-Friedman, Lesli; Banda, Martha

2014-03-01

Restaurant initiatives provide an efficient opportunity to impact large numbers of patrons. The purpose of this study is to measure patron purchasing behaviors during the ¡Por Vida! menu designation initiative. This study used a cross-sectional design and survey data to assess 23 restaurants throughout Bexar County and 152 restaurant patrons. The Patron Awareness Questionnaire assessed if patrons noticed the logo; believed nutrition, cost, and taste were important in making purchasing decisions; and purchased a ¡Por Vida! item. Descriptive statistics, Spearman correlations, and logistic regression were used to analyze the data. Most (93.4%) patrons considered taste very important when deciding what to eat. Cost was very important to 63.8% and nutrition was very important to 55.9% of the sample. The strongest predictors of purchasing a ¡Por Vida! item were the patrons' ages being between 18 and 35 years (odds ratio = 1.474; confidence interval = 0.017, 0.812; p < .05) and if patrons saw the logo (odds ratio = 4.327; confidence interval = 1.696-11.036; p < .01). Menu logo designation initiatives can potentially influence patron purchasing behaviors among a segment of the population when the logo is visible.

The effects of work engagement and self-efficacy on personal initiative and performance.

PubMed

Lisbona, Ana; Palaci, Francisco; Salanova, Marisa; Frese, Michael

2018-02-01

Two popular concepts, work engagement and personal initiative, are different but related constructs. This study is based on and extends the Frese and Fay (2001) model of personal initiative (PI) by including work engagement (WE) and self-efficacy as antecedents of PI, and performance as a consequence. Two studies (study 1, with a cross-sectional design using N = 396 participants from 22 organizations, and study 2, with a longitudinal design conducted in two waves with N = 118 participants from 15 organizations) test the hypotheses. Structural equation modeling and the PROCESS SPSS Macro were used to test the hypothesized mediating role of personal initiative in work engagement and performance, and the results show the indirect effect of WE on performance through PI. The results of these two studies confirmed our hypotheses: WE and self-efficacy lead to higher PI, which, in turn, leads to higher performance. In addition to considering WE as an antecedent of PI, the results lead to considering PI as an antecedent of performance.

Designing E-Portfolio with ARCS Motivational Design Strategies to Enhance Self-Directed Learning

ERIC Educational Resources Information Center

Mohamad, Syamsul Nor Azlan; Embi, Mohamed Amin; Nordin, Norazah Mohd

2016-01-01

This paper presents the instructional design effect on motivation towards the implementation of e-Portfolio with ARCS Motivational design strategies to enhance self-directed learning. The purpose of the study was to examine the learners' motivation level after the implementation of e-Portfolio. Initially, this paper was conducted to study a total…

Getting the big picture: the macro-politics of information system development (and failure) in a Canadian hospital.

PubMed

Balka, E

2003-01-01

While recognized that global actors influence health information system design, studies of health informatics have largely focused on micro politics of technology design and implementation. Here a problematic patient care information system (PCIS) is discussed in relation to federal and provincial policies and corporate strategies to demonstrate that our understanding of health informatics can be enhanced by linking micro studies of health informatics to larger macro contexts. Interviews and document study. Although the extent to which federal initiatives influenced (or failed to influence) provincial and hospital initiatives remains debateable, events initiated at one level (the hospital's decision to implement software, initiated at the organizational level) are influenced (perhaps indirectly) by developments in other contexts (federal/macro changes gave an initiative more weight; provincial initiatives such as the Labour Accord altered the industrial relations environment in which system development occurred). Micro-studies of work practice, invaluable in addressing interactions between technologies, users and work practices, often fail to account for the historic reach of global actors, although it is often these historic circumstances that contribute to present-day interactions between user, information system and organization, and that find expression - often indirectly - in daily work practices.

Biomechanical aspects of initial intraosseous stability and implant design: a quantitative micro-morphometric analysis.

PubMed

Akça, Kivanç; Chang, Ting-Ling; Tekdemir, Ibrahim; Fanuscu, Mete I

2006-08-01

The objective of this biomechanical study was to explore the effect of bone micro-morphology on initial intraosseous stability of implants with different designs. Straumann and Astra Tech dental implants were placed into anterior and posterior regions of completely edentulous maxilla and mandible of a human cadaver. Experiments were undertaken to quantify initial implant stability and bone micro-morphology. Installation torque values (ITVs) and implant stability quotients (ISQs) were measured to determine initial intraosseous implant stability. For quantification of relative bone volume and micro-architecture, sectioned implant-bone and bone core specimens of each implant placement site were consecutively scanned and trabecular bone was analyzed in a micro-computed tomography (micro-CT) unit. Experimental outcomes were evaluated for correlations among implant designs, initial intraosseous implant stability and bone micro-structural parameters. ITVs correlated higher with bone volume fraction (BV/TV) than ISQs, at 88.1% and 68.9% levels, respectively. Correlations between ITVs and micro-morphometric parameters were significant at the 95% confidence level (P<0.05) while ISQs were not. Differences in ITVs, ISQs and BV/TV data in regards to implant designs used were not significant at the 95% confidence level (P>0.05). Bone micro-morphology has a prevailing effect over implant design on intraosseus initial implant stability, and ITV is more sensitive in terms of revealing biomechanical properties at the bone-implant interface in comparison with ISQ.

Initial planetary base construction techniques and machine implementation

NASA Technical Reports Server (NTRS)

Crockford, William W.

1987-01-01

Conceptual designs of (1) initial planetary base structures, and (2) an unmanned machine to perform the construction of these structures using materials local to the planet are presented. Rock melting is suggested as a possible technique to be used by the machine in fabricating roads, platforms, and interlocking bricks. Identification of problem areas in machine design and materials processing is accomplished. The feasibility of the designs is contingent upon favorable results of an analysis of the engineering behavior of the product materials. The analysis requires knowledge of several parameters for solution of the constitutive equations of the theory of elasticity. An initial collection of these parameters is presented which helps to define research needed to perform a realistic feasibility study. A qualitative approach to estimating power and mass lift requirements for the proposed machine is used which employs specifications of currently available equipment. An initial, unmanned mission scenario is discussed with emphasis on identifying uncompleted tasks and suggesting design considerations for vehicles and primitive structures which use the products of the machine processing.

Designing a Consequentially Based Study into the Online Support of Pre-Service Teachers in the UK

ERIC Educational Resources Information Center

Kontopoulou, Konstantina; Fox, Alison

2015-01-01

This paper reports on the design of a pilot doctoral study into the online support of pre-service teachers. It highlights the significance of a consequential, rather than deontological, perspective in guiding the development of a study's design. The study initially aimed to explore pre-service teachers' perceptions and use of social media on their…

The Early Childhood Cluster Initiative of Palm Beach County, Florida. Early Implementation Study and Evaluability Assessment. Executive Summary

ERIC Educational Resources Information Center

Spielberger, Julie; Goyette, Paul

2006-01-01

This report summarizes findings from the first year of an implementation study of the Early Childhood Cluster Initiative (ECCI). ECCI is a prekindergarten program in ten elementary schools and a community child care center in Palm Beach County, based on the design of the High/Scope Perry Preschool model. The initiative is characterized by low…

Development of LC-13C NMR

NASA Technical Reports Server (NTRS)

Dorn, H. C.; Wang, J. S.; Glass, T. E.

1986-01-01

This study involves the development of C-13 nuclear resonance as an on-line detector for liquid chromatography (LC-C-13 NMR) for the chemical characterization of aviation fuels. The initial focus of this study was the development of a high sensitivity flow C-13 NMR probe. Since C-13 NMR sensitivity is of paramount concern, considerable effort during the first year was directed at new NMR probe designs. In particular, various toroid coil designs were examined. In addition, corresponding shim coils for correcting the main magnetic field (B sub 0) homogeneity were examined. Based on these initial probe design studies, an LC-C-13 NMR probe was built and flow C-13 NMR data was obtained for a limited number of samples.

Scoping Materials for Initial Design of EPA Research Study on Potential Relationships Between Hydraulic Fracturing and Drinking Water Resources, March 2010

EPA Pesticide Factsheets

The purpose of this document is to describe the initial steps in framing a study consistent with the House of Representatives Appropriate Conference committee mandate to carry out a study on the relationship between hydraulic fracturing and drinking water.

The Implementation Challenge and the Learning Health System for SCI Initiative.

PubMed

Stucki, Gerold; Bickenbach, Jerome

2017-02-01

The paper introduces the special issue by linking the International Spinal Cord Injury (InSCI) Community Survey study to the Learning Health System for SCI Initiative (LHS-SCI). The LHS-SCI was designed to respond to the implementation challenge of bringing about policy reform in light of the targeted policy recommendations of World Health Organization's International Perspectives on SCI report as well as the call for action of WHO's Global Disability Action Plan. The paper reviews the components of LHS-SCI relevant to internationally comparable information, a theory of change to guide for action, and the tools for evidence-informed policy. The interplay between persons, their health needs, and the societal response to those needs provides the foundation for the organization of the LHS-SCI Initiative. Moreover, as the other articles in this special issue describe in detail, the rationale, conceptualization, and study design of the InSCI study are also informed by the rationale, and mission, of the LHS for SCI Initiative. The LHS-SCI, and the implementation challenge that motivates it, is responsible for the design of the InSCI study and the overall mission of LHS-SCI to continuously improve the lived experience of people living with SCI around the world through an international evidence- and rights-informed research and policy reform effort.

(TUCSON) STUDY DESIGN AND PRELIMINARY EXPOSURE FINDINGS ASSOCIATED WITH THE DEARS

EPA Science Inventory

The Detroit Exposure and Aerosol Research Study (DEARS) is a three-year field monitoring study initiated in 2004 that is designed to measure exposure and describe exposure relationships for air toxics, PM components, PM from specific sources, and criteria pollutants. Detroit, Mic...

Destined to Design? How and Why Australian Women Choose to Study Industrial Design

ERIC Educational Resources Information Center

Lockhart, Cathy; Miller, Evonne

2016-01-01

Despite over three decades of legislation and initiatives designed to tackle the traditional gender divide in the science, technology and design fields, only a quarter of the registered architects in Australia are women. There are no statistics available for other design disciplines, with little known about why women choose design as a career path…

76 FR 68769 - Bridging the Idea Development Evaluation Assessment and Long-Term Initiative and Total Product...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-07

... complementary methodological frameworks of the IDEAL and TPLC initiatives, more comprehensive and applicable... devices, surgical operations, and invasive medical procedures; Unique study designs and reporting methods...

The Early Childhood Cluster Initiative of Palm Beach County, Florida. Early Implementation Study And Evaluability Assessment. Final Report. Chapin Hall Working Paper

ERIC Educational Resources Information Center

Spielberger, Julie; Goyette, Paul

2006-01-01

This publication reports findings from the first year of an implementation study of the Early Childhood Cluster Initiative (ECCI). ECCI is a prekindergarten program in ten elementary schools and a community child care center in Palm Beach County, based on the design of the High/Scope Perry Preschool model. The initiative is characterized by low…

Roadmap to Measuring Distance Education Instructional Design Competencies

ERIC Educational Resources Information Center

Dooley, Kim E.; Lindner, James R.; Telg, Ricky W.; Irani, Tracy; Moore, Lori; Lundy, Lisa

2007-01-01

This study was designed to measure instructional design competencies as a result of participation in a 9-month Web-based training program called "Roadmap to Effective Distance Education Instructional Design." The researchers used a self-assessment pre- and posttest to determine participant initial and final competence in 12 areas: adult…

A Participatory Design Approach for a Mobile App-Based Personal Response System

ERIC Educational Resources Information Center

Song, Donggil; Oh, Eun Young

2016-01-01

This study reports on a participatory design approach including the design, development, implementation, and evaluation of a mobile app-based personal response system (PRS). The first cycle formulated initial design principles through context and needs analysis; the second utilized the collaboration with instructors and experts embodying specific…

Rehabilitation of jointed Portland cement concrete pavements : SPS-6--initial evaluation and analysis

DOT National Transportation Integrated Search

2005-10-01

The Specific Pavement Studies 6 (SPS-6) experiment, "Rehabilitation of Jointed Portland Cement Concrete Pavements," was designed as a controlled field experiment that focuses on the study of specific rehabilitation design features of jointed plain co...

( DETROIT, MI ) STUDY DESIGN AND PRELIMINARY EXPOSURE FINDINGS ASSOCIATED WITH THE DEARS

EPA Science Inventory

The Detroit Exposure and Aerosol Research Study (DEARS) is a three-year field monitoring study initiated in 2004 that is designed to measure exposure and describe exposure relationships for air toxics, PM components, PM from specific sources, and criteria pollutants. Detroit, Mic...

Advance Approach to Concept and Design Studies for Space Missions

NASA Technical Reports Server (NTRS)

Deutsch, M.; Nichols, J.

1999-01-01

Recent automated and advanced techniques developed at JPL have created a streamlined and fast-track approach to initial mission conceptualization and system architecture design, answering the need for rapid turnaround of trade studies for potential proposers, as well as mission and instrument study groups.

A Screening Matrix for an Initial Line of Inquiry

ERIC Educational Resources Information Center

Nordness, Philip D.; Swain, Kristine D.; Haverkost, Ann

2012-01-01

The Screening for Understanding: Initial Line of Inquiry was designed to be used in conjunction with the child study team planning process for dealing with continuous problem behaviors prior to conducting a formal functional behavioral assessment. To conduct the initial line of inquiry a one-page reproducible screening matrix was used during child…

78 FR 76629 - The National Children's Study, Vanguard (Pilot) Study; Submission for OMB Review; 30-Day Comment...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-18

..., revisions to existing Study visits, and the initiation of methodological substudies. The NCS Vanguard Study... design of the Main Study of the National Children's Study. Background: The National Children's Study is a... questionnaire containing key variables and designed to collect core data at every study visit contact from the...

Parametric Geometry, Structured Grid Generation, and Initial Design Study for REST-Class Hypersonic Inlets

NASA Technical Reports Server (NTRS)

Ferlemann, Paul G.; Gollan, Rowan J.

2010-01-01

Computational design and analysis of three-dimensional hypersonic inlets with shape transition has been a significant challenge due to the complex geometry and grid required for three-dimensional viscous flow calculations. Currently, the design process utilizes an inviscid design tool to produce initial inlet shapes by streamline tracing through an axisymmetric compression field. However, the shape is defined by a large number of points rather than a continuous surface and lacks important features such as blunt leading edges. Therefore, a design system has been developed to parametrically construct true CAD geometry and link the topology of a structured grid to the geometry. The Adaptive Modeling Language (AML) constitutes the underlying framework that is used to build the geometry and grid topology. Parameterization of the CAD geometry allows the inlet shapes produced by the inviscid design tool to be generated, but also allows a great deal of flexibility to modify the shape to account for three-dimensional viscous effects. By linking the grid topology to the parametric geometry, the GridPro grid generation software can be used efficiently to produce a smooth hexahedral multiblock grid. To demonstrate the new capability, a matrix of inlets were designed by varying four geometry parameters in the inviscid design tool. The goals of the initial design study were to explore inviscid design tool geometry variations with a three-dimensional analysis approach, demonstrate a solution rate which would enable the use of high-fidelity viscous three-dimensional CFD in future design efforts, process the results for important performance parameters, and perform a sample optimization.

Seeding the initial population with feasible solutions in metaheuristic optimization of steel trusses

NASA Astrophysics Data System (ADS)

Kazemzadeh Azad, Saeid

2018-01-01

In spite of considerable research work on the development of efficient algorithms for discrete sizing optimization of steel truss structures, only a few studies have addressed non-algorithmic issues affecting the general performance of algorithms. For instance, an important question is whether starting the design optimization from a feasible solution is fruitful or not. This study is an attempt to investigate the effect of seeding the initial population with feasible solutions on the general performance of metaheuristic techniques. To this end, the sensitivity of recently proposed metaheuristic algorithms to the feasibility of initial candidate designs is evaluated through practical discrete sizing of real-size steel truss structures. The numerical experiments indicate that seeding the initial population with feasible solutions can improve the computational efficiency of metaheuristic structural optimization algorithms, especially in the early stages of the optimization. This paves the way for efficient metaheuristic optimization of large-scale structural systems.

49 CFR 268.21 - Down-selection of one or more Maglev projects for further study and selection of one project for...

Code of Federal Regulations, 2014 CFR

2014-10-01

... further study and selection of one project for final design, engineering, and construction funding. 268.21... and selection of one project for final design, engineering, and construction funding. (a) Upon... analyses necessary prior to initiation of construction. Final design and engineering work will also be...

49 CFR 268.21 - Down-selection of one or more Maglev projects for further study and selection of one project for...

Code of Federal Regulations, 2010 CFR

2010-10-01

... further study and selection of one project for final design, engineering, and construction funding. 268.21... and selection of one project for final design, engineering, and construction funding. (a) Upon... analyses necessary prior to initiation of construction. Final design and engineering work will also be...

49 CFR 268.21 - Down-selection of one or more Maglev projects for further study and selection of one project for...

Code of Federal Regulations, 2011 CFR

2011-10-01

... further study and selection of one project for final design, engineering, and construction funding. 268.21... and selection of one project for final design, engineering, and construction funding. (a) Upon... analyses necessary prior to initiation of construction. Final design and engineering work will also be...

49 CFR 268.21 - Down-selection of one or more Maglev projects for further study and selection of one project for...

Code of Federal Regulations, 2012 CFR

2012-10-01

... further study and selection of one project for final design, engineering, and construction funding. 268.21... and selection of one project for final design, engineering, and construction funding. (a) Upon... analyses necessary prior to initiation of construction. Final design and engineering work will also be...

49 CFR 268.21 - Down-selection of one or more Maglev projects for further study and selection of one project for...

Code of Federal Regulations, 2013 CFR

2013-10-01

... further study and selection of one project for final design, engineering, and construction funding. 268.21... and selection of one project for final design, engineering, and construction funding. (a) Upon... analyses necessary prior to initiation of construction. Final design and engineering work will also be...

LIFESPAN: A tool for the computer-aided design of longitudinal studies

PubMed Central

Brandmaier, Andreas M.; von Oertzen, Timo; Ghisletta, Paolo; Hertzog, Christopher; Lindenberger, Ulman

2015-01-01

Researchers planning a longitudinal study typically search, more or less informally, a multivariate space of possible study designs that include dimensions such as the hypothesized true variance in change, indicator reliability, the number and spacing of measurement occasions, total study time, and sample size. The main search goal is to select a research design that best addresses the guiding questions and hypotheses of the planned study while heeding applicable external conditions and constraints, including time, money, feasibility, and ethical considerations. Because longitudinal study selection ultimately requires optimization under constraints, it is amenable to the general operating principles of optimization in computer-aided design. Based on power equivalence theory (MacCallum et al., 2010; von Oertzen, 2010), we propose a computational framework to promote more systematic searches within the study design space. Starting with an initial design, the proposed framework generates a set of alternative models with equal statistical power to detect hypothesized effects, and delineates trade-off relations among relevant parameters, such as total study time and the number of measurement occasions. We present LIFESPAN (Longitudinal Interactive Front End Study Planner), which implements this framework. LIFESPAN boosts the efficiency, breadth, and precision of the search for optimal longitudinal designs. Its initial version, which is freely available at http://www.brandmaier.de/lifespan, is geared toward the power to detect variance in change as specified in a linear latent growth curve model. PMID:25852596

Learning at Air Navigation Services after Initial Training

ERIC Educational Resources Information Center

Teperi, Anna-Maria; Leppanen, Anneli

2010-01-01

Purpose: This study aims to find out the means used for individual, group and organizational learning at work at one air navigation service provider after the initial training period. The study also aims to find out what practices need to be improved to enhance learning at work. Design/methodology/approach: The data for the study were collected…

Implementation of LRFD geotechnical design for deep foundations using Texas Cone Penetrometer (TCP) test.

DOT National Transportation Integrated Search

2015-09-01

This study provides resistance factors (I) for design of deep foundations to implement Load and Resistance Factor Design (LRFD) for bridge foundations using Texas Cone Penetrometer (TCP) Test data. Initial efforts were made to determine resistance fa...

An improved turbine disk design to increase reliability of aircraft jet engines

NASA Technical Reports Server (NTRS)

Barack, W. N.; Domas, P. A.

1976-01-01

An analytical study was performed on a novel disk design to replace the existing high-pressure turbine, stage 1 disk on the CF6-50 turbofan engine. Preliminary studies were conducted on seven candidate disk design concepts. An integral multidisk design with bore entry of the turbine blade cooling air was selected as the improved disk design. This disk has the unique feature of being redundant such that if one portion of the disk would fail, the remaining portion would prevent the release of large disk fragments from the turbine system. Low cycle fatigue lives, initial defect propagation lives, burst speed, and the kinetic energies of probable disk fragment configurations were calculated, and comparisons were made with the existing disk, both in its current material, IN 718, and with the substitution of an advanced alloy, Rene 95. The design for redundancy approach which necessitated the addition of approximately 44.5 kg (98 lb) to the design disk substantially improved the life of the disk. The life to crack initiation was increased from 30,000 cycles to more than 100,000 cycles. The cycles to failure from initial defect propagation were increased from 380 cycles to 1564 cycles. Burst speed was increased from 126 percent overspeed to 149 percent overspeed. Additionally, the maximum fragment energies associated with a failure were decreased by an order of magnitude.

78 FR 52548 - The National Children's Study, Vanguard (Pilot) Study Proposed Collection; 60-day Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-23

... the initiation of methodological substudies. The NCS Vanguard Study is a prospective, longitudinal pilot study of child health and development that will inform the design of the Main Study of the... variables and designed to collect core data at every study visit contact from the time that the enrolled...

Preparing Teachers for Diversity: The Role of Initial Teacher Education. Annex 2 To the Final Report to DG Education, Youth, Sport and Culture of the European Commission. Case Study Summaries

ERIC Educational Resources Information Center

European Commission, 2017

2017-01-01

"Preparing Teachers for Diversity: The Role of Initial Teacher Education. Annex 2 To the Final Report to DG Education, Youth, Sport and Culture of the European Commission. Case Study Summaries" is designed as a companion document to the final report "Preparing Teachers for Diversity: The Role of Initial Teacher Education. Final…

Method for Designing Electronic Assemblies without Potting for Gun Launched Applications Through the Use of Additive Manufacturing

DTIC Science & Technology

2016-12-01

easily would be preferred. Many studies have been conducted to model the effects of potting materials on PCBs and their components: two such studies ...catch (SCAT) gun Guidance electronics On -board recorder (OBR) Precision guided munition (PGM) 16. SECURITY CLASSIFICATION OF: 17... On -board Recorder 2 Initial Method - Modeling Assumptions 2 Initial Method - Parts, Instances, and Simplifications in the Model 3 Initial Method

Final Report on the Study of the Impact of the Statewide Systemic Initiatives. Lessons Learned about Designing, Implementing, and Evaluating Statewide Systemic Reform. WCER Working Paper No. 2003-12

ERIC Educational Resources Information Center

Heck, Daniel J.; Weiss, Iris R.; Boyd, Sally E.; Howard, Michael N.; Supovitz, Jonathan A.

2003-01-01

This document represents the first of two volumes presented in "Study of the Impact of the Statewide Systemic Initiatives Program" (Norman L. Webb and Iris R. Weiss). In an effort to evaluate the impact of the Statewide Systemic Initiatives (SSIs) on student achievement and the lessons that could be learned from the National Science…

Specimen Designs for Testing Advanced Aeropropulsion Materials Under In-Plane Biaxial Loading

NASA Technical Reports Server (NTRS)

Ellis, John R.; Abul-Aziz, Ali

2003-01-01

A design study was undertaken to develop specimen designs for testing advanced aeropropulsion materials under in-plane biaxial loading. The focus of initial work was on developing a specimen design suitable for deformation and strength tests to be conducted under monotonic loading. The type of loading initially assumed in this study was the special case of equibiaxial, tensile loading. A specimen design was successfully developed after a lengthy design and optimization process with overall dimensions of 12 by 12 by 0.625 in., and a gage area of 3.875 by 3.875 by 0.080 in. Subsequently, the scope of the work was extended to include the development of a second design tailored for tests involving cyclic loading. A specimen design suitably tailored to meet these requirements was successfully developed with overall dimensions of 12 by 12 by 0.500 in. and a gage area of 2.375 by 2.375 by 0.050 in. Finally, an investigation was made to determine whether the specimen designs developed in this study for equibiaxial, tensile loading could be used without modification to investigate general forms of biaxial loading. For best results, it was concluded that specimen designs need to be optimized and tailored to meet the specific loading requirements of individual research programs.

A Program Evaluation of a Worksite Wellness Initiative for Weight Loss

ERIC Educational Resources Information Center

Martinez, Nicholas

2017-01-01

The purpose of this study was to conduct a program evaluation of ACME's worksite weight loss initiative and collect evidence relative to the efficacy of the program. An anonymous online survey was administered to participants of the weight loss initiative. The survey was designed to gather information relative to the research questions, which…

Getting Ready for School: Palm Beach County's Early Childhood Cluster Initiative

ERIC Educational Resources Information Center

Spielberger, Julie; Baker, Stephen; Winje, Carolyn

2008-01-01

This publication reports findings from the second year of an implementation study of the Early Childhood Cluster Initiative (ECCI). ECCI is a prekindergarten program in ten elementary schools and a community child care center in Palm Beach County, based on the design of the High/Scope Perry Preschool model. The initiative is characterized by low…

Evaluation of horizontal curve design

DOT National Transportation Integrated Search

1980-08-01

This report documents an initial evaluation of horizontal curve design criteria which involved two phases: an observational study and an analytical evaluation. Three classes of vehicles (automobiles, school buses and tractor semi-trailers) and three ...

Development and Initial Validation of the Performance Perfectionism Scale for Sport (PPS-S)

ERIC Educational Resources Information Center

Hill, Andrew P.; Appleton, Paul R.; Mallinson, Sarah H.

2016-01-01

Valid and reliable instruments are required to appropriately study perfectionism. With this in mind, three studies are presented that describe the development and initial validation of a new instrument designed to measure multidimensional performance perfectionism for use in sport (Performance Perfectionism Scale--Sport [PPS-S]). The instrument is…

Studying the Emergence of Autism Spectrum Disorders in High-Risk Infants: Methodological and Practical Issues

ERIC Educational Resources Information Center

Zwaigenbaum, Lonnie; Thurm, Audrey; Stone, Wendy; Baranek, Grace; Bryson, Susan; Iverson, Jana; Kau, Alice; Klin, Ami; Lord, Cathy; Landa, Rebecca; Rogers, Sally; Sigman, Marian

2007-01-01

Detecting early signs of autism is essential for timely diagnosis and initiation of effective interventions. Several research groups have initiated prospective studies of high-risk populations including infant siblings, to systematically collect data on early signs within a longitudinal design. Despite the potential advantages of prospective…

What makes a sustainability tool valuable, practical and useful in real-world healthcare practice? A mixed-methods study on the development of the Long Term Success Tool in Northwest London

PubMed Central

Lennox, Laura; Doyle, Cathal; Reed, Julie E

2017-01-01

Objectives Although improvement initiatives show benefits to patient care, they often fail to sustain. Models and frameworks exist to address this challenge, but issues with design, clarity and usability have been barriers to use in healthcare settings. This work aimed to collaborate with stakeholders to develop a sustainability tool relevant to people in healthcare settings and practical for use in improvement initiatives. Design Tool development was conducted in six stages. A scoping literature review, group discussions and a stakeholder engagement event explored literature findings and their resonance with stakeholders in healthcare settings. Interviews, small-scale trialling and piloting explored the design and tested the practicality of the tool in improvement initiatives. Setting National Institute for Health Research Collaboration for Leadership in Applied Health Research and Care for Northwest London (CLAHRC NWL). Participants CLAHRC NWL improvement initiative teams and staff. Results The iterative design process and engagement of stakeholders informed the articulation of the sustainability factors identified from the literature and guided tool design for practical application. Key iterations of factors and tool design are discussed. From the development process, the Long Term Success Tool (LTST) has been designed. The Tool supports those implementing improvements to reflect on 12 sustainability factors to identify risks to increase chances of achieving sustainability over time. The Tool is designed to provide a platform for improvement teams to share their own views on sustainability as well as learn about the different views held within their team to prompt discussion and actions. Conclusion The development of the LTST has reinforced the importance of working with stakeholders to design strategies which respond to their needs and preferences and can practically be implemented in real-world settings. Further research is required to study the use and effectiveness of the tool in practice and assess engagement with the method over time. PMID:28947436

STRengthening Analytical Thinking for Observational Studies: the STRATOS initiative

PubMed Central

Sauerbrei, Willi; Abrahamowicz, Michal; Altman, Douglas G; le Cessie, Saskia; Carpenter, James

2014-01-01

The validity and practical utility of observational medical research depends critically on good study design, excellent data quality, appropriate statistical methods and accurate interpretation of results. Statistical methodology has seen substantial development in recent times. Unfortunately, many of these methodological developments are ignored in practice. Consequently, design and analysis of observational studies often exhibit serious weaknesses. The lack of guidance on vital practical issues discourages many applied researchers from using more sophisticated and possibly more appropriate methods when analyzing observational studies. Furthermore, many analyses are conducted by researchers with a relatively weak statistical background and limited experience in using statistical methodology and software. Consequently, even ‘standard’ analyses reported in the medical literature are often flawed, casting doubt on their results and conclusions. An efficient way to help researchers to keep up with recent methodological developments is to develop guidance documents that are spread to the research community at large. These observations led to the initiation of the strengthening analytical thinking for observational studies (STRATOS) initiative, a large collaboration of experts in many different areas of biostatistical research. The objective of STRATOS is to provide accessible and accurate guidance in the design and analysis of observational studies. The guidance is intended for applied statisticians and other data analysts with varying levels of statistical education, experience and interests. In this article, we introduce the STRATOS initiative and its main aims, present the need for guidance documents and outline the planned approach and progress so far. We encourage other biostatisticians to become involved. PMID:25074480

The IMI PROTECT project: purpose, organizational structure, and procedures.

PubMed

Reynolds, Robert F; Kurz, Xavier; de Groot, Mark C H; Schlienger, Raymond G; Grimaldi-Bensouda, Lamiae; Tcherny-Lessenot, Stephanie; Klungel, Olaf H

2016-03-01

The Pharmacoepidemiological Research on Outcomes of Therapeutics by a European ConsorTium (PROTECT) initiative was a collaborative European project that sought to address limitations of current methods in the field of pharmacoepidemiology and pharmacovigilance. Initiated in 2009 and ending in 2015, PROTECT was part of the Innovative Medicines Initiative, a joint undertaking by the European Union and pharmaceutical industry. Thirty-five partners including academics, regulators, small and medium enterprises, and European Federation of Pharmaceuticals Industries and Associations companies contributed to PROTECT. Two work packages within PROTECT implemented research examining the extent to which differences in the study design, methodology, and choice of data source can contribute to producing discrepant results from observational studies on drug safety. To evaluate the effect of these differences, the project applied different designs and analytic methodology for six drug-adverse event pairs across several electronic healthcare databases and registries. This papers introduces the organizational structure and procedures of PROTECT, including how drug-adverse event and data sources were selected, study design and analyses documents were developed, and results managed centrally. Copyright © 2016 John Wiley & Sons, Ltd.

Design-Based Research and Video Game Based Learning: Developing the Educational Video Game "Citizen Science"

ERIC Educational Resources Information Center

Gaydos, Matthew J.

2013-01-01

This paper presents a series of studies detailing the research and development of the educational science video game "Citizen Science." It documents the design process, beginning with the initial grant and ending with a case study of two teachers who used the game in their classrooms. Following a design-based research approach, this…

Submersible Aircraft Concept Design Study - Amendment 1. Additional Assessment of Design Risks & Sensitivities within the Original Study, and an Initial Assessment of Key Control Aspects

DTIC Science & Technology

2011-02-01

http://www.redhammer.se/tornado/index.html (3) Aircraft Design: A Conceptual Approach, Daniel P. Raymer , AIAA, 1992 (4) (5) Moran, J., Computational...Fluid Dynamics, Wiley & Sons, 1984. Notes on the Stability and Control of Tailless Airplanes, Robert T. Jones, NACA Technical Note No.837, December

Prospective cohort studies of newly marketed medications: using covariate data to inform the design of large-scale studies.

PubMed

Franklin, Jessica M; Rassen, Jeremy A; Bartels, Dorothee B; Schneeweiss, Sebastian

2014-01-01

Nonrandomized safety and effectiveness studies are often initiated immediately after the approval of a new medication, but patients prescribed the new medication during this period may be substantially different from those receiving an existing comparator treatment. Restricting the study to comparable patients after data have been collected is inefficient in prospective studies with primary collection of outcomes. We discuss design and methods for evaluating covariate data to assess the comparability of treatment groups, identify patient subgroups that are not comparable, and decide when to transition to a large-scale comparative study. We demonstrate methods in an example study comparing Cox-2 inhibitors during their postmarketing period (1999-2005) with nonselective nonsteroidal anti-inflammatory drugs (NSAIDs). Graphical checks of propensity score distributions in each treatment group showed substantial problems with overlap in the initial cohorts. In the first half of 1999, >40% of patients were in the region of nonoverlap on the propensity score, and across the study period this fraction never dropped below 10% (the a priori decision threshold for transitioning to the large-scale study). After restricting to patients with no prior NSAID use, <1% of patients were in the region of nonoverlap, indicating that a large-scale study could be initiated in this subgroup and few patients would need to be trimmed from analysis. A sequential study design that uses pilot data to evaluate treatment selection can guide the efficient design of large-scale outcome studies with primary data collection by focusing on comparable patients.

Improving Agricultural Science Teachers' Work Attitude in Akwa Ibom State of Nigeria: The Financial Initiative Perspective

ERIC Educational Resources Information Center

Ben, Camilus Bassey

2014-01-01

This research study carried out to investigate the influence of financial incentive initiatives on agricultural teachers' work attitude in Akwa Ibom State, Nigeria. One hypothesis was formulated to guide the study. Ex-post facto research design was adopted for the study. A total sample of 150 agricultural science teachers and 150 students drawn…

Impact of prehospital transfer strategies in major trauma and head injury: systematic review, meta-analysis, and recommendations for study design.

PubMed

Pickering, Alastair; Cooper, Katy; Harnan, Susan; Sutton, Anthea; Mason, Suzanne; Nicholl, Jonathan

2015-01-01

It is unclear whether trauma patients should be transferred initially to a trauma center or local hospital. A systematic review and meta-analysis assessed the evidence for direct transport to specialist centers (SCs) versus initial stabilization at non-SCs (NSCs) for major trauma or moderate-to-severe head injury. Nine databases were searched from 1988 to 2012. Limitations in the study design informed recommendations for future studies. Of 19 major trauma studies, five (n = 19,910) included patients not transferred to SCs and adjusted for case mix. Meta-analysis showed no difference in mortality for initial triage to NSCs versus SCs (odds ratio [OR] 1.03; 95% confidence interval [CI], 0.85-1.23). Within studies excluding patients not transferred to SCs, unadjusted analyses of mortality nonsignificantly favored transfer via NSCs (16 studies; n = 37,079; OR, 0.83; 95% CI, 0.68-1.01), whereas adjusted analysis nonsignificantly favored direct triage to SCs (9 studies; n = 34,266; OR, 1.18; 95% CI, 0.96-1.44). Of 11 head injury studies, all excluded patients not transferred to SCs and half were in remote locations. There was no significant mortality difference between initial triage to NSCs versus SCs within adjusted analyses (3 studies; n = 1,507; OR, 0.74; 95% CI, 0.31-1.79) or unadjusted analyses (10 studies; n = 3,671; OR, 0.87; 95% CI, 0.62-1.23). This systematic review demonstrated no difference in outcomes for direct transport to a trauma center versus initial triage to a local hospital. Many studies had significant limitations in the design, and heterogeneity was high. Recommendations for future studies include the following: (i) inclusion of patients not transferred to SCs and those dying during transport; (ii) clear description of centers plus transport distances/times; (iii) adjustments for case mix; and (iv) assessment of morbidity and mortality. Systematic review, level IV.

Getting in Touch with Paramedic Student Career Intentions

ERIC Educational Resources Information Center

O'Meara, Peter; Tourle, Vianne; Madigan, Veronica; Lighton, David

2012-01-01

Objective: This study of paramedic and nursing/paramedic students aimed to determine the initial career intentions of full-time paramedic students and to identify the key factors that influence their career choices. Design: A longitudinal study design, utilizing surveys and a focus group, was employed. Setting: The study was conducted in an…

Meteoritic basalts: the nakhlites, their parental magmas, cooling rates, and equivalents on Earth. Final technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Treiman, A.H.

1987-07-01

Proposed one-bar phase equilibrium experiments, designed to determine the compositions of the nakhlites' parental magmas, are in progress. Proposed field studies on Earth, designed to find occurrences of rocks like the nakhlites, were extraordinarily successful. Other work supported in the past year included: attendance at the 1986 national meeting of the Geological Society of America; attendance at the 18th Lunar and Planetary Science Conference; completion and publication of a study of core formation in the SNC parent body; initiation of a study of the flux of SNC meteorites onto the Earth; and initiation of petrologic study of the Angra dosmore » Reis achondrite.« less

Development of an Overlay Design Procedure for Composite Pavements

DOT National Transportation Integrated Search

2017-09-01

The composite overlay design procedure currently used by ODOT sometimes produces very large overlay thicknesses that are deemed structurally unnecessary, especially for composite pavements already with thick asphalt overlays. This study was initiated...

Corporate social responsibility initiatives addressing social exclusion in Bangladesh.

PubMed

Werner, Wendy J

2009-08-01

The private sector is often seen as a driver of exclusionary processes rather than a partner in improving the health and welfare of socially-excluded populations. However, private-sector initiatives and partnerships- collectively labelled corporate social responsibility (CSR) initiatives-may be able to positively impact social status, earning potential, and access to services and resources for socially-excluded populations. This paper presents case studies of CSR projects in Bangladesh that are designed to reduce social exclusion among marginalized populations and explores whether CSR initiatives can increase economic and social capabilities to reduce exclusion. The examples provide snapshots of projects that (a) increase job-skills and employment opportunities for women, disabled women, and rehabilitated drug-users and (b) provide healthcare services to female workers and their communities. The CSR case studies cover a limited number of people but characteristics and practices replicable and scaleable across different industries, countries, and populations are identified. Common success factors from the case studies form the basis for recommendations to design and implement more CSR initiatives targeting socially-excluded groups. The analysis found that CSR has potential for positive and lasting impact on developing countries, especifically on socially-excluded populations. However, there is a need for additional monitoring and critical evaluation.

Nuclear Engine System Simulation (NESS). Volume 1: Program user's guide

NASA Astrophysics Data System (ADS)

Pelaccio, Dennis G.; Scheil, Christine M.; Petrosky, Lyman J.

1993-03-01

A Nuclear Thermal Propulsion (NTP) engine system design analysis tool is required to support current and future Space Exploration Initiative (SEI) propulsion and vehicle design studies. Currently available NTP engine design models are those developed during the NERVA program in the 1960's and early 1970's and are highly unique to that design or are modifications of current liquid propulsion system design models. To date, NTP engine-based liquid design models lack integrated design of key NTP engine design features in the areas of reactor, shielding, multi-propellant capability, and multi-redundant pump feed fuel systems. Additionally, since the SEI effort is in the initial development stage, a robust, verified NTP analysis design tool could be of great use to the community. This effort developed an NTP engine system design analysis program (tool), known as the Nuclear Engine System Simulation (NESS) program, to support ongoing and future engine system and stage design study efforts. In this effort, Science Applications International Corporation's (SAIC) NTP version of the Expanded Liquid Engine Simulation (ELES) program was modified extensively to include Westinghouse Electric Corporation's near-term solid-core reactor design model. The ELES program has extensive capability to conduct preliminary system design analysis of liquid rocket systems and vehicles. The program is modular in nature and is versatile in terms of modeling state-of-the-art component and system options as discussed. The Westinghouse reactor design model, which was integrated in the NESS program, is based on the near-term solid-core ENABLER NTP reactor design concept. This program is now capable of accurately modeling (characterizing) a complete near-term solid-core NTP engine system in great detail, for a number of design options, in an efficient manner. The following discussion summarizes the overall analysis methodology, key assumptions, and capabilities associated with the NESS presents an example problem, and compares the results to related NTP engine system designs. Initial installation instructions and program disks are in Volume 2 of the NESS Program User's Guide.

Nuclear Engine System Simulation (NESS). Volume 1: Program user's guide

NASA Technical Reports Server (NTRS)

Pelaccio, Dennis G.; Scheil, Christine M.; Petrosky, Lyman J.

1993-01-01

A Nuclear Thermal Propulsion (NTP) engine system design analysis tool is required to support current and future Space Exploration Initiative (SEI) propulsion and vehicle design studies. Currently available NTP engine design models are those developed during the NERVA program in the 1960's and early 1970's and are highly unique to that design or are modifications of current liquid propulsion system design models. To date, NTP engine-based liquid design models lack integrated design of key NTP engine design features in the areas of reactor, shielding, multi-propellant capability, and multi-redundant pump feed fuel systems. Additionally, since the SEI effort is in the initial development stage, a robust, verified NTP analysis design tool could be of great use to the community. This effort developed an NTP engine system design analysis program (tool), known as the Nuclear Engine System Simulation (NESS) program, to support ongoing and future engine system and stage design study efforts. In this effort, Science Applications International Corporation's (SAIC) NTP version of the Expanded Liquid Engine Simulation (ELES) program was modified extensively to include Westinghouse Electric Corporation's near-term solid-core reactor design model. The ELES program has extensive capability to conduct preliminary system design analysis of liquid rocket systems and vehicles. The program is modular in nature and is versatile in terms of modeling state-of-the-art component and system options as discussed. The Westinghouse reactor design model, which was integrated in the NESS program, is based on the near-term solid-core ENABLER NTP reactor design concept. This program is now capable of accurately modeling (characterizing) a complete near-term solid-core NTP engine system in great detail, for a number of design options, in an efficient manner. The following discussion summarizes the overall analysis methodology, key assumptions, and capabilities associated with the NESS presents an example problem, and compares the results to related NTP engine system designs. Initial installation instructions and program disks are in Volume 2 of the NESS Program User's Guide.

Comorbidity ascertainment from the ESRD Medical Evidence Report and Medicare claims around dialysis initiation: a comparison using US Renal Data System data.

PubMed

Krishnan, Mahesh; Weinhandl, Eric D; Jackson, Scott; Gilbertson, David T; Lacson, Eduardo

2015-11-01

The end-stage renal disease Medical Evidence Report serves as a source of comorbid condition data for risk adjustment of quality metrics. We sought to compare comorbid condition data in the Medical Evidence Report around dialysis therapy initiation with diagnosis codes in Medicare claims. Observational cohort study using US Renal Data System data. Medicare-enrolled elderly (≥66 years) patients who initiated maintenance dialysis therapy July 1 to December 31, 2007, 2008, or 2009. 12 comorbid conditions ascertained from claims during the 6 months before dialysis therapy initiation, the Medical Evidence Report, and claims during the 3 months after dialysis therapy initiation. None. Comorbid condition prevalence according to claims before dialysis therapy initiation generally exceeded prevalence according to the Medical Evidence Report. The κ statistics for comorbid condition designations other than diabetes ranged from 0.06 to 0.43. Discordance of designations was associated with age, race, sex, and end-stage renal disease Network. During 23,930 patient-years of follow-up from 4 to 12 months after dialysis therapy initiation (8,930 deaths), designations from claims during the 3 months after initiation better discriminated risk of death than designations from the Medical Evidence Report (C statistics of 0.674 vs 0.616). Between the Medical Evidence Report and claims, standardized mortality ratios changed by >10% for more than half the dialysis facilities. Neither the Medical Evidence Report nor diagnosis codes in claims constitute a gold standard of comorbid condition data; results may not apply to nonelderly patients or patients without Medicare coverage. Discordance of comorbid condition designations from the Medical Evidence Report and claims around dialysis therapy initiation was substantial and significantly associated with patient characteristics, including location. These patterns may engender bias in risk-adjusted quality metrics. In lieu of the Medical Evidence Report, claims during the 3 months after dialysis therapy initiation may constitute a useful source of comorbid condition data. Copyright © 2015 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

Using mixed methods research in medical education: basic guidelines for researchers.

PubMed

Schifferdecker, Karen E; Reed, Virginia A

2009-07-01

Mixed methods research involves the collection, analysis and integration of both qualitative and quantitative data in a single study. The benefits of a mixed methods approach are particularly evident when studying new questions or complex initiatives and interactions, which is often the case in medical education research. Basic guidelines for when to use mixed methods research and how to design a mixed methods study in medical education research are not readily available. The purpose of this paper is to remedy that situation by providing an overview of mixed methods research, research design models relevant for medical education research, examples of each research design model in medical education research, and basic guidelines for medical education researchers interested in mixed methods research. Mixed methods may prove superior in increasing the integrity and applicability of findings when studying new or complex initiatives and interactions in medical education research. They deserve an increased presence and recognition in medical education research.

Explorations in Teaching Sustainable Design: A Studio Experience in Interior Design/Architecture

ERIC Educational Resources Information Center

Gurel, Meltem O.

2010-01-01

This article argues that a design studio can be a dynamic medium to explore the creative potential of the complexity of sustainability from its technological to social ends. The study seeks to determine the impact of an interior design/architecture studio experience that was initiated to teach diverse meanings of sustainability and to engage the…

Getting Ready for School: Palm Beach County's Early Childhood Cluster Initiative. Executive Summary

ERIC Educational Resources Information Center

Spielberger, Julie; Baker, Stephen; Winje, Carolyn

2008-01-01

This report summarizes findings from the second year of an implementation study of the Early Childhood Cluster Initiative (ECCI). ECCI is a prekindergarten program in ten elementary schools and a community child care center in Palm Beach County, based on the design of the High/Scope Perry Preschool model. The initiative is characterized by low…

Active Learning through Toy Design and Development

ERIC Educational Resources Information Center

Sirinterlikci, Arif; Zane, Linda; Sirinterlikci, Aleea L.

2009-01-01

This article presents an initiative that is based on active learning pedagogy by engaging elementary and middle school students in the toy design and development field. The case study presented in this article is about student learning experiences during their participation in the TOYchallenge National Toy Design Competition. Students followed the…

Conceptual Design of Environmentally Friendly Rotorcraft - A Comparison of NASA and ONERA Approaches

NASA Technical Reports Server (NTRS)

Russell, Carl; Basset, Pierre-Marie

2015-01-01

In 2011, a task was initiated under the US-French Project Agreement on rotorcraft studies to collaborate on design methodologies for environmentally friendly rotorcraft. This paper summarizes the efforts of that collaboration. The French and US aerospace agencies, ONERA and NASA, have their own software toolsets and approaches to rotorcraft design. The first step of this research effort was to understand how rotorcraft impact the environment, with the initial focus on air pollution. Second, similar baseline helicopters were developed for a passenger transport mission, using NASA and ONERA rotorcraft design software tools. Comparisons were made between the designs generated by the two tools. Finally, rotorcraft designs were generated targeting reduced environmental impact. The results show that a rotorcraft design that targets reduced environmental impact can be significantly different than one that targets traditional cost drivers, such as fuel burn and empty weight.

Initial Field Testing for Forest Tree Improvement

Treesearch

C. B. Briscoe

1963-01-01

Initial field testing for forest tree improvement is essentially a comparison of genetic groups whether the level of comparison is of species, provenances, or individual trees. A good study design should be as economical as possible, for a given precision, and must be accurate. The latter is simply obtained by restricting the study to a specified set of conditions,...

Novice, Urban, High School, Special Education Teachers' Reports Regarding Initiating Instructional Change

ERIC Educational Resources Information Center

Maule, Jay

2017-01-01

The purpose of this exploratory research study was to investigate novice, urban, high school, special education teachers' reports of how they initiate instructional change in an inclusive environment and the instructional change situations they feel ill-equipped to address. This qualitative study was designed to fill a gap in the literature by…

Green University Initiatives in China: A Case of Tsinghua University

ERIC Educational Resources Information Center

Zhao, Wanxia; Zou, Yonghua

2015-01-01

Purpose: The purpose of this paper is to examine green university initiatives in the context of China, using Tsinghua University, which is China's green university pioneer, as a case study. Design/methodology/approach: The research method used for this paper is a case study based on participant observation and document analysis. The approach to…

A Literature Review of Academic Library Web Page Studies

ERIC Educational Resources Information Center

Blummer, Barbara

2007-01-01

In the early 1990s, numerous academic libraries adopted the web as a communication tool with users. The literature on academic library websites includes research on both design and navigation. Early studies typically focused on design characteristics, since websites initially merely provided information on the services and collections available in…

Design of Affectively Evocative Smart Ambient Media for Learning

ERIC Educational Resources Information Center

Kwok, Ron Chi-Wai; Cheng, Shuk Han; Ip, Horace Ho-Shing; Kong, Joseph Siu-Lung

2011-01-01

This study proposes a teaching and research initiative, named SAMAL (Smart AMbience for Affective Learning) that will provide a unique ambient mediated environment for integrating cognitive and affective approaches to enhance learning. Also, this study illustrates a design of SAMAL classroom with affectively evocative scenarios for learning de…

Supporting School Leaders in Blended Learning with Blended Learning

ERIC Educational Resources Information Center

Acree, Lauren; Gibson, Theresa; Mangum, Nancy; Wolf, Mary Ann; Kellogg, Shaun; Branon, Suzanne

2017-01-01

This study provides a mixed-methods case-study design evaluation of the Leadership in Blended Learning (LBL) program. The LBL program uses blended approaches, including face-to-face and online, to prepare school leaders to implement blended learning initiatives in their schools. This evaluation found that the program designers effectively…

Study on film resistivity of Energy Conversion Components for MEMS Initiating Explosive Device

NASA Astrophysics Data System (ADS)

Ren, Wei; Zhang, Bin; Zhao, Yulong; Chu, Enyi; Yin, Ming; Li, Hui; Wang, Kexuan

2018-03-01

Resistivity of Plane-film Energy Conversion Components is a key parameter to influence its resistance and explosive performance, and also it has important relations with the preparation of thin film technology, scale, structure and etc. In order to improve the design of Energy Conversion Components for MEMS Initiating Explosive Device, and reduce the design deviation of Energy Conversion Components in microscale, guarantee the design resistance and ignition performance of MEMS Initiating Explosive Device, this paper theoretically analyzed the influence factors of film resistivity in microscale, through the preparation of Al film and Ni-Cr film at different thickness with micro/nano, then obtain the film resistivity parameter of the typical metal under different thickness, and reveals the effect rule of the scale to the resistivity in microscale, at the same time we obtain the corresponding inflection point data.

Breckinridge Project, initial effort. Report XI, Volume V. Critical review of the design basis. [Critical review

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1982-01-01

Report XI, Technical Audit, is a compendium of research material used during the Initial Effort in making engineering comparisons and decisions. Volumes 4 and 5 of Report XI present those studies which provide a Critical Review of the Design Basis. The Critical Review Report, prepared by Intercontinental Econergy Associates, Inc., summarizes findings from an extensive review of the data base for the H-Coal process design. Volume 4 presents this review and assessment, and includes supporting material; specifically, Design Data Tabulation (Appendix A), Process Flow Sheets (Appendix B), and References (Appendix C). Volume 5 is a continuation of the references ofmore » Appendix C. Studies of a proprietary nature are noted and referenced, but are not included in these volumes. They are included in the Limited Access versions of these reports and may be reviewed by properly cleared personnel in the offices of Ashland Synthetic Fuels, Inc.« less

Updated Assessment of an Open Rotor Airplane Using an Advanced Blade Design

NASA Technical Reports Server (NTRS)

Hendricks, Eric S.; Berton, Jeffrey J.; Haller, William J.; Tong, Michael T.; Guynn, Mark D.

2013-01-01

Application of open rotor propulsion systems (historically referred to as "advanced turboprops" or "propfans") to subsonic transport aircraft received significant attention and research in the 1970s and 1980s when fuel efficiency was the driving focus of aeronautical research. Recent volatility in fuel prices and concern for aviation's environmental impact have renewed interest in open rotor propulsion, and revived research by NASA and a number of engine manufacturers. Over the last few years, NASA has revived and developed analysis capabilities to assess aircraft designs with open rotor propulsion systems. These efforts have been described in several previous papers along with initial results from applying these capabilities. The initial results indicated that open rotor engines have the potential to provide large reductions in fuel consumption and emissions. Initial noise analysis indicated that current noise regulations can be met with modern baseline blade designs. Improved blades incorporating low-noise features are expected to result in even lower noise levels. This paper describes improvements to the initial assessment, plus a follow-on study using a more advanced open rotor blade design to power the advanced singleaisle transport. The predicted performance and environmental results of these two advanced open rotor concepts are presented and compared.

A modified varying-stage adaptive phase II/III clinical trial design.

PubMed

Dong, Gaohong; Vandemeulebroecke, Marc

2016-07-01

Conventionally, adaptive phase II/III clinical trials are carried out with a strict two-stage design. Recently, a varying-stage adaptive phase II/III clinical trial design has been developed. In this design, following the first stage, an intermediate stage can be adaptively added to obtain more data, so that a more informative decision can be made. Therefore, the number of further investigational stages is determined based upon data accumulated to the interim analysis. This design considers two plausible study endpoints, with one of them initially designated as the primary endpoint. Based on interim results, another endpoint can be switched as the primary endpoint. However, in many therapeutic areas, the primary study endpoint is well established. Therefore, we modify this design to consider one study endpoint only so that it may be more readily applicable in real clinical trial designs. Our simulations show that, the same as the original design, this modified design controls the Type I error rate, and the design parameters such as the threshold probability for the two-stage setting and the alpha allocation ratio in the two-stage setting versus the three-stage setting have a great impact on the design characteristics. However, this modified design requires a larger sample size for the initial stage, and the probability of futility becomes much higher when the threshold probability for the two-stage setting gets smaller. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Controller Evaluation of Initial Data Link En Route Air Traffic Control Services: ISSS Design Development. Study 1

DTIC Science & Technology

1994-05-01

services developed for transmission using Data Link technology . Candidate designs for five ATC services and functions for the new Initial Sector Suite System...clarify suspected confusions to avoid further congestion. 1.2.2 Data Link Communications . Data Link is a digital communications technology which is being... developed as a supplement to traditional voice radio for two-way, air-ground ATC communications and other applications. As shown in figure 1, Data Link

Designing Home-Based Telemedicine Systems for the Geriatric Population: An Empirical Study.

PubMed

Narasimha, Shraddhaa; Agnisarman, Sruthy; Chalil Madathil, Kapil; Gramopadhye, Anand; McElligott, James T

2018-02-01

Background and Introduction: Telemedicine, the process of providing healthcare remotely using communication devices, has the potential to be useful for the geriatric population when specifically designed for this age group. This study explored the design of four video telemedicine systems currently available and outlined issues with these systems that impact usability among the geriatric population. Based on the results, design suggestions were developed to improve telemedicine systems for this population. Using a between-subjects experimental design, the study considered four telemedicine systems used in Medical University of South Carolina. The study was conducted at a local retirement home. The participant pool consisted of 40 adults, 60 years or older. The dependent measures used were the mean times for telemedicine session initiation and video session, mean number of errors, post-test satisfaction ratings, the NASA-Task Load Index (NASA-TLX) workload measures, and the IBM-Computer Systems Usability Questionnaire measures. Statistical significance was found among the telemedicine systems' initiation times. The analysis of the qualitative data revealed several issues, including lengthy e-mail content, icon placement, and chat box design, which affect the usability of these systems for the geriatric population. Human factor-based design modifications, including short, precise e-mail content, appropriately placed icons, and the inclusion of instructions, are recommended to address the issues found in the qualitative study.

SELF-INSTRUCTIONAL SUPPLEMENTS FOR A TELEVISED PHYSICS COURSE, STUDY PLAN AND EXPERIMENTAL DESIGN.

ERIC Educational Resources Information Center

KLAUS, DAVID J.; LUMSDAINE, ARTHUR A.

THE INITIAL PHASES OF A STUDY OF SELF-INSTRUCTIONAL AIDS FOR A TELEVISED PHYSICS COURSE WERE DESCRIBED. THE APPROACH, EXPERIMENTAL DESIGN, PROCEDURE, AND TECHNICAL ASPECTS OF THE STUDY PLAN WERE INCLUDED. THE MATERIALS WERE PREPARED TO SUPPLEMENT THE SECOND SEMESTER OF HIGH SCHOOL PHYSICS. THE MATERIAL COVERED STATIC AND CURRENT ELECTRICITY,…

Learning Study: Nurturing the Instructional Design and Teaching Competency of Pre-Service Teachers

ERIC Educational Resources Information Center

Cheng, Eric C. K.

2014-01-01

This paper presents an evaluation study of an innovative and theory-based initial teacher education course entitled Learning Study, the aim of which is to develop the instructional design and teaching competency of pre-service teachers in Hong Kong. The Learning Study course is offered to all second year students as part of the Bachelor of…

STRengthening analytical thinking for observational studies: the STRATOS initiative.

PubMed

Sauerbrei, Willi; Abrahamowicz, Michal; Altman, Douglas G; le Cessie, Saskia; Carpenter, James

2014-12-30

The validity and practical utility of observational medical research depends critically on good study design, excellent data quality, appropriate statistical methods and accurate interpretation of results. Statistical methodology has seen substantial development in recent times. Unfortunately, many of these methodological developments are ignored in practice. Consequently, design and analysis of observational studies often exhibit serious weaknesses. The lack of guidance on vital practical issues discourages many applied researchers from using more sophisticated and possibly more appropriate methods when analyzing observational studies. Furthermore, many analyses are conducted by researchers with a relatively weak statistical background and limited experience in using statistical methodology and software. Consequently, even 'standard' analyses reported in the medical literature are often flawed, casting doubt on their results and conclusions. An efficient way to help researchers to keep up with recent methodological developments is to develop guidance documents that are spread to the research community at large. These observations led to the initiation of the strengthening analytical thinking for observational studies (STRATOS) initiative, a large collaboration of experts in many different areas of biostatistical research. The objective of STRATOS is to provide accessible and accurate guidance in the design and analysis of observational studies. The guidance is intended for applied statisticians and other data analysts with varying levels of statistical education, experience and interests. In this article, we introduce the STRATOS initiative and its main aims, present the need for guidance documents and outline the planned approach and progress so far. We encourage other biostatisticians to become involved. © 2014 The Authors. Statistics in Medicine published by John Wiley & Sons, Ltd.

The orbiter mate/demate device

NASA Technical Reports Server (NTRS)

Miller, A. J.; Binkley, W. H.

1985-01-01

The numerous components and systems of the space shuttle orbiter mate/demate device (MDD) are discussed. Special emphasis is given, mechanisms and mechanical systems to discuss in general their requirements, functions, and design; and, where applicable, to relate any unusual problems encountered during the initial concept studies, final design, and construction are discussed. The MDD and its electrical, machinery, and mechanical systems, including the main hoisting system, power operated access service platform, wind restrain and adjustment mechanism, etc., were successfully designed and constructed. The MDD was used routinely during the initial orbiter-747 approach and landing test and the more recent orbiter flight tests recovery and mate operations.

Continued Monitoring of Indiana's SPS9-A Site

DOT National Transportation Integrated Search

2012-07-01

This study was initiated to continue monitoring the performance of five test sections placed in 1997 to compare the performance of : Superpave asphalt mixtures with different binder grades and one test section designed using the Marshall mix design m...

Initial system design method for non-rotationally symmetric systems based on Gaussian brackets and Nodal aberration theory.

PubMed

Zhong, Yi; Gross, Herbert

2017-05-01

Freeform surfaces play important roles in improving the imaging performance of off-axis optical systems. However, for some systems with high requirements in specifications, the structure of the freeform surfaces could be very complicated and the number of freeform surfaces could be large. That brings challenges in fabrication and increases the cost. Therefore, to achieve a good initial system with minimum aberrations and reasonable structure before implementing freeform surfaces is essential for optical designers. The already existing initial system design methods are limited to certain types of systems. A universal tool or method to achieve a good initial system efficiently is very important. In this paper, based on the Nodal aberration theory and the system design method using Gaussian Brackets, the initial system design method is extended from rotationally symmetric systems to general non-rotationally symmetric systems. The design steps are introduced and on this basis, two off-axis three-mirror systems are pre-designed using spherical shape surfaces. The primary aberrations are minimized using the nonlinear least-squares solver. This work provides insight and guidance for initial system design of off-axis mirror systems.

Faculty Social Capital at Work in a Community College Student Success and Completion Initiative

ERIC Educational Resources Information Center

Funaro, Janette

2017-01-01

The purpose of this case study was to examine the role of social capital in the enactment of a faculty-based initiative designed to improve student success and completion at one community college. The concept of social capital--or the actual and potential resources that are embedded in relationships--has been examined in research studies in many…

Self-Efficacy, Risk-Taking Behavior and Mental Health as Predictors of Personal Growth Initiative among University Undergraduates

ERIC Educational Resources Information Center

Ogunyemi, Ajibola O.; Mabekoje, Sesan Ola

2007-01-01

Introduction: This study sought to determine the combined and relative efficacy of self-efficacy, risk-taking behaviour and mental health on personal growth initiative of university undergraduates. Method: The expo-facto research design was used to conduct the study. Stratified random sampling technique was used to select 425 participants from 6…

One to One Computing: A Summary of the Quantitative Results from the Berkshire Wireless Learning Initiative

ERIC Educational Resources Information Center

Bebell, Damian; Kay, Rachel

2010-01-01

This paper examines the educational impacts of the Berkshire Wireless Learning Initiative (BWLI), a pilot program that provided 1:1 technology access to all students and teachers across five public and private middle schools in western Massachusetts. Using a pre/post comparative study design, the current study explores a wide range of program…

Node position influences viability and contamination in hazelnut shoot

USDA-ARS?s Scientific Manuscript database

Initiation of shoot cultures is difficult in many woody plants due to internal microbial contaminants and general lack of juvenility in material from the source plants. Hazelnuts (Corylus avellana L.) are generally difficult to initiate into culture for these same reasons. This study was designed to...

Conceptual design optimization study

NASA Technical Reports Server (NTRS)

Hollowell, S. J.; Beeman, E. R., II; Hiyama, R. M.

1990-01-01

The feasibility of applying multilevel functional decomposition and optimization techniques to conceptual design of advanced fighter aircraft was investigated. Applying the functional decomposition techniques to the conceptual design phase appears to be feasible. The initial implementation of the modified design process will optimize wing design variables. A hybrid approach, combining functional decomposition techniques for generation of aerodynamic and mass properties linear sensitivity derivatives with existing techniques for sizing mission performance and optimization, is proposed.

The Professional Development Needs of School-Based Leadership in Preparation for a District-Wide One-to-One Initiative in a Large Urban School District

ERIC Educational Resources Information Center

Simmons, Brandon Dean

2015-01-01

The purpose of this study was to determine the professional development needs of school-based leadership in preparation for a district-wide one-to-one initiative in a large urban school district. This study used an explanatory sequential mixed methods design to answer the three research questions that drove the study. Research for this study was…

Conducting pilot and feasibility studies.

PubMed

Cope, Diane G

2015-03-01

Planning a well-designed research study can be tedious and laborious work. However, this process is critical and ultimately can produce valid, reliable study findings. Designing a large-scale randomized, controlled trial (RCT)-the gold standard in quantitative research-can be even more challenging. Even the most well-planned study potentially can result in issues with research procedures and design, such as recruitment, retention, or methodology. One strategy that may facilitate sound study design is the completion of a pilot or feasibility study prior to the initiation of a larger-scale trial. This article will discuss pilot and feasibility studies, their advantages and disadvantages, and implications for oncology nursing research. 
.

Theories and Applications of Massive Online Open Courses (MOOCs): The Case for Hybrid Design

ERIC Educational Resources Information Center

Anders, Abram

2015-01-01

Initial studies of learning in massive open online courses (MOOCs) primarily focused on participation patterns and participant experiences. More recently, research has addressed learning theories and offered case studies of different pedagogical designs for MOOCs. Based on a meta-analysis and synthesis of the research literature, this study…

An ROI Comparison of Initiatives Designed to Attract Diverse Students to Technology Careers

ERIC Educational Resources Information Center

Dillon, Thomas W.; Reif, Harry L.; Thomas, Daphyne S.

2016-01-01

This study examines two alternative interventions designed to attract diverse students to pursue information technology or, more generally, STEM (science, technology, engineering, and math) careers from a Return on Investment (ROI) perspective. More specifically, this study examines the effectiveness and efficiency of single-day and multi-day…

A Mixed Methods Portrait of Urban Instrumental Music Teaching

ERIC Educational Resources Information Center

Fitzpatrick, Kate R.

2011-01-01

The purpose of this mixed methods study was to learn about the ways that instrumental music teachers in Chicago navigated the urban landscape. The design of the study most closely resembles Creswell and Plano Clark's (2007) two-part Triangulation Convergence Mixed Methods Design, with the addition of an initial exploratory focus group component.…

Knotworking and the Visibilization of Learning in Building Design

ERIC Educational Resources Information Center

Kerosuo, Hannele; Mäki, Tarja; Korpela, Jenni

2015-01-01

Purpose: This paper aims to study the visibilization of learning in the context of developing a new collaborative practice, knotworking, in building design. The case under study describes the process of learning from the initiation of knotworking to its experimentation. The implementation of new building information modeling tools acted as an…

Using CFD Techniques to Predict Slosh Force Frequency and Damping Rate

NASA Technical Reports Server (NTRS)

Marsell, Brandon; Gangadharan, Sathya; Chatman, Yadira; Sudermann, James

2009-01-01

Resonant effects and energy dissipation due to sloshing fuel inside propellant tanks are problems that arise in the initial design of any spacecraft or launch vehicle. A faster and more reliable method for calculating these effects during the design stages is needed. Using Computational Fluid Dynamics (CFD) techniques, a model of these fuel tanks can be created and used to predict important parameters such as resonant slosh frequency and damping rate. This initial study addresses the case of free surface slosh. Future studies will focus on creating models for tanks fitted with propellant management devices (PMD) such as diaphragms and baffles.

Program Aids Design Of Fluid-Circulating Systems

NASA Technical Reports Server (NTRS)

Bacskay, Allen; Dalee, Robert

1992-01-01

Computer Aided Systems Engineering and Analysis (CASE/A) program is interactive software tool for trade study and analysis, designed to increase productivity during all phases of systems engineering. Graphics-based command-driven software package provides user-friendly computing environment in which engineer analyzes performance and interface characteristics of ECLS/ATC system. Useful during all phases of spacecraft-design program, from initial conceptual design trade studies to actual flight, including pre-flight prediction and in-flight analysis of anomalies. Written in FORTRAN 77.

Design of a Temperature-Responsive Transcription Terminator.

PubMed

Roßmanith, Johanna; Weskamp, Mareen; Narberhaus, Franz

2018-02-16

RNA structures regulate various steps in gene expression. Transcription in bacteria is typically terminated by stable hairpin structures. Translation initiation can be modulated by metabolite- or temperature-sensitive RNA structures, called riboswitches or RNA thermometers (RNATs), respectively. RNATs control translation initiation by occlusion of the ribosome binding site at low temperatures. Increasing temperatures destabilize the RNA structure and facilitate ribosome access. In this study, we exploited temperature-responsive RNAT structures to design regulatory elements that control transcription termination instead of translation initiation in Escherichia coli. In order to mimic the structure of factor-independent intrinsic terminators, naturally occurring RNAT hairpins were genetically engineered to be followed by a U-stretch. Functional temperature-responsive terminators (thermoterms) prevented mRNA synthesis at low temperatures but resumed transcription after a temperature upshift. The successful design of temperature-controlled terminators highlights the potential of RNA structures as versatile gene expression control elements.

First Lunar Outpost support study

NASA Technical Reports Server (NTRS)

Bartz, Christopher; Cook, John; Rusingizandekwe, Jean-Luc

1993-01-01

The First Lunar Outpost (FLO) is the first manned step in the accomplishment of the Space Exploration Initiative, the Vice President's directive to NASA on the 20th anniversary of the Apollo moon landing. FLO's broad objectives are the establishment of a permanent human presence on the moon, supporting the utilization of extraterrestrial resources in a long-term, sustained program. The primary objective is to emplace and validate the first elements of a man tended outpost on the lunar surface to provide the basis for: (1) establishing, maintaining and expanding human activities and influence across the surface; (2) establishing, maintaining and enhancing human safety and productivity; (3) accommodating space transportation operations to and from the surface; (4) accommodating production of scientific information; (5) exploiting in-situ resources. Secondary objectives are: (1) to conduct local, small scale science (including life science); (2) In-situ resource utilization (ISRU) demonstrations; (3) engineering and operations tests; (4) to characterize the local environment; and (5) to explore locally. The current work is part of ongoing research at the Sasakawa International Center for Space Architecture supporting NASA's First Lunar Outpost initiative. Research at SICSA supporting the First Lunar Outpost initiative has been funded through the Space Exploration Initiatives office at Johnson Space Center. The objectives of the current study are to further develop a module concept from an evaluation of volumetric and programmatic requirements, and pursue a high fidelity design of this concept, with the intention of providing a high fidelity design mockup to research planetary design issues and evaluate future design concepts.

Sustainability Actions in Australia

ERIC Educational Resources Information Center

Webster, Jenni; Robinson, Leigh; Trimper, Kelvin; Salagaras, Stan

2007-01-01

This article presents Australian case studies of educational buildings with environmentally sustainable designs. This includes the new public school complex for Williamstown High School and the Peel Learning Centre designed for Murdoc University. This article also includes sustainability initiatives by private developers working in collaboration…

Material Testing and Initial Pavement Design Modeling: Minnesota Road Research Project

DOT National Transportation Integrated Search

1996-09-01

Between January 1990 and December 1994, a study verified and applied a Corps of Engineers-developed mechanistic design and evaluation method for pavements in seasonal frost areas as part of a Construction Productivity Advancement Research (CPAR) proj...

PROSPECTIVE PREGNANCY STUDY DESIGNS FOR ASSESSING REPRODUCTIVE AND DEVELOPMENTAL TOXICANTS

EPA Science Inventory

Of late, there is increasing recognition that exposures before, at or shortly after conception have life-long implications for human reproduction and development. Despite this evolving literature, few research initiatives have been designed to empirically evaluate exposures durin...

Factors affecting consumer usage and acceptance of child restraints

DOT National Transportation Integrated Search

1983-09-01

This study was designed to focus on two factors with potential relevance to the child restraint device (CRD) usage problem: CRD design and directions for use; problems of initial users and repeated users were targeted for consideration. Ultimate obje...

Care-physical activity initiatives in the neighbourhood: study protocol for mixed-methods research on participation, effective elements, impact, and funding methods.

PubMed

Wagemakers, Annemarie; Mulderij, Lisanne S; Verkooijen, Kirsten T; Groenewoud, Stef; Koelen, Maria A

2018-06-28

In the Netherlands, people with a low socioeconomic status (SES) live approximately 6 years less and are less engaged in physical activity (PA) than high SES citizens. This contributes to the persistent health inequalities between low and high SES citizens. Care-PA initiatives are deemed effective for stimulating PA and improving health and participation among peoples with a low SES. In those initiatives, multiple sectors (e.g. sports, health insurers, municipalities) collaborate to connect primary care and PA at neighbourhood level. This study focuses on two Dutch municipalities that aim to invest in Health in All Policies (HiAP) and care-PA initiatives to improve the health of people with low SES. The aim is to gain insight into (1) the short-term (3 months) and long-term (1 year) outcomes of participating in care-PA initiatives for low SES citizens in terms of health, quality of life, and societal participation, (2) the effective elements that contribute to these outcomes, (3) the direct and perceived societal costs and benefits of care-PA initiatives, and (4) alternative ways to fund integrated care, prevention, and care-PA initiatives at neighbourhood level. The study will be built on a mixed-methods design guided by action research to continuously facilitate participatory processes and practical solutions. To assess outcomes, body measurements and questionnaires will be used as part of a pre-test/post-test design. Focus groups and interviews will be conducted to gain an in-depth understanding of outcomes and action elements. Action elements will be explored by using multiple tools: concept mapping, the logic model, and capacity mapping. Direct and perceived societal costs will be measured by administrative data from healthcare insurers (before-after design) and the effectiveness arena. An alternative funding model will be identified based on literature study, expert meetings, and municipal workshops. Initiatives addressing multiple factors at different levels in an integral way are a challenge for evaluation. Multi-methods and tools are required, and data need to be interpreted comprehensively in order to contribute to a contextual insight into what works and why in relation to HiAP and care-PA initiatives.

Attitudinal Responses to Changes in Noise Exposure in Residential Communities

NASA Technical Reports Server (NTRS)

Horonjeff, Richard D.; Robert, William E.

1997-01-01

The purpose of this study is (1) to investigate the current body of knowledge encompassing two related topics: (a) to what extent can we reliably predict the change in people's attitudes in response to an abrupt change in noise exposure, and (b) after the change, is there a decay in the abrupt-change effect whereby people's attitudes slowly shift from their initial reaction to a steady-state value? and (2) to provide recommendations for any future work that may be needed. The literature search located 23 studies relating to one or both of the above topics. These prior studies shed considerable light on the current ability to predict initial reaction and decay effects. The literature makes one point very clear: Great care in both experimental design and data analysis is necessary to produce credible, convincing findings, both in the reanalysis of existing data and for planning future data acquisition and analysis studies. New airport studies must be designed to minimize nuisance variables and avoid past design features that may have introduced sufficient unexplained variance to mask sought after effects. Additionally, the study must be designed to tie in with previous investigations by incorporating similar survey questions and techniques.

Topology-optimized metasurfaces: impact of initial geometric layout.

PubMed

Yang, Jianji; Fan, Jonathan A

2017-08-15

Topology optimization is a powerful iterative inverse design technique in metasurface engineering and can transform an initial layout into a high-performance device. With this method, devices are optimized within a local design phase space, making the identification of suitable initial geometries essential. In this Letter, we examine the impact of initial geometric layout on the performance of large-angle (75 deg) topology-optimized metagrating deflectors. We find that when conventional metasurface designs based on dielectric nanoposts are used as initial layouts for topology optimization, the final devices have efficiencies around 65%. In contrast, when random initial layouts are used, the final devices have ultra-high efficiencies that can reach 94%. Our numerical experiments suggest that device topologies based on conventional metasurface designs may not be suitable to produce ultra-high-efficiency, large-angle metasurfaces. Rather, initial geometric layouts with non-trivial topologies and shapes are required.

The Florida State Initial Teacher Certification Test: A Case Study.

ERIC Educational Resources Information Center

Dorn, Charles M.

1989-01-01

Describes the development of the art certification examination which was designed for the Florida State Initial Teacher Certification Test. Discusses problems of subjectivity, content, and question format. Suggests criteria which can guide the development of viable college art education programs that can adequately prepare teachers in the areas of…

The Memory Bridge Initiative on Service Learners

ERIC Educational Resources Information Center

Wescott, Amy; Healy, Tara C.

2011-01-01

This study evaluated the Memory Bridge Initiative (MBI), an educational, experiential program pairing high school students with older adults who have dementia. A qualitative, single group design with baseline and follow-up measures examined whether or not students would have a positive learning experience while gaining newfound appreciation and…

Customized Assessment Group Initiative: A Complementary Approach to Students' Learning

ERIC Educational Resources Information Center

Akindayomi, Akinloye

2015-01-01

This study, conducted in a US setting, examines the importance of group dynamics that emphasize cooperative team building through the proposed grouping strategy called Customized Assessment Group Initiative (CAGI). CAGI is a student grouping strategy designed to operationalize the mutual accountability concept central to the definition of teams by…

Examining Student Digital Artifacts during a Year-Long Technology Integration Initiative

ERIC Educational Resources Information Center

Rodriguez, Prisca M.; Frey, Chris; Dawson, Kara; Liu, Feng; Ritzhaupt, Albert D.

2012-01-01

This study was situated within a year-long, statewide technology integration initiative designed to support technology integration within science, technology, engineering, and math classrooms. It examined the elements used in student artifacts in an attempt to investigate trends in digital artifact creation. Among several conclusions, this…

A Case Study in Applying Lean Sustainability Concepts to Universities

ERIC Educational Resources Information Center

Comm, Clare L.; Mathaisel, Dennis F. X.

2005-01-01

Purpose: To apply the concepts of lean and sustainability to higher education. Design/methodology/approach: A questionnaire was developed, administered to 18 public and private universities and analyzed. Findings: The focus in higher education is now on cost reduction or budget containment initiatives. Although these initiatives were not…

High-Energy-Density LCA-Coupled Structural Energetic Materials for Counter WMD Applications

DTIC Science & Technology

2014-04-01

reactive ( thermite ) fillers as high-energy-density structural energetic materials. The specific objectives include performing fundamental studies to...a) investigate mechanics of dynamic densification and reaction initiation in Ta+Fe2O3 and Ta+Bi2O3 thermite powder mixtures and to (b) design and...initiation in the thermite filler and allow controlled fragmentation. Linear Cellular A; counter WMDs; shock-compression and impact-initiated reactions

Character Education by Design: A Blueprint for Successful District and School Initiatives

ERIC Educational Resources Information Center

Maryland State Department of Education, 2007

2007-01-01

Designed for district- and school-level character education committees, "Character Education by Design: A Blueprint for Successful District and School Initiatives" is a how-to guide for developing an effective character education initiative, one that will not only enhance the climate of the school and social behavior of the students, but…

Optimal placement of trailing-edge flaps for helicopter vibration reduction using response surface methods

NASA Astrophysics Data System (ADS)

Viswamurthy, S. R.; Ganguli, Ranjan

2007-03-01

This study aims to determine optimal locations of dual trailing-edge flaps to achieve minimum hub vibration levels in a helicopter, while incurring low penalty in terms of required trailing-edge flap control power. An aeroelastic analysis based on finite elements in space and time is used in conjunction with an optimal control algorithm to determine the flap time history for vibration minimization. The reduced hub vibration levels and required flap control power (due to flap motion) are the two objectives considered in this study and the flap locations along the blade are the design variables. It is found that second order polynomial response surfaces based on the central composite design of the theory of design of experiments describe both objectives adequately. Numerical studies for a four-bladed hingeless rotor show that both objectives are more sensitive to outboard flap location compared to the inboard flap location by an order of magnitude. Optimization results show a disjoint Pareto surface between the two objectives. Two interesting design points are obtained. The first design gives 77 percent vibration reduction from baseline conditions (no flap motion) with a 7 percent increase in flap power compared to the initial design. The second design yields 70 percent reduction in hub vibration with a 27 percent reduction in flap power from the initial design.

Best Practices in the Design of Aerobic Training Programs

DTIC Science & Technology

2010-03-02

a pretest - posttest design. To determine the effect size due to training, estimates of the training response were adjusted for the type of research ...studies reviewed here employed pretest - posttest research designs. In such cases, the correlation of pretest scores with posttest scores affects the... pretest - posttest correlation (see Appendix A). was measured more than twice in some studies. When this was the case, ES was computed using the initial and

Malleable Thought: The Role of Craft Thinking in Practice-Led Graphic Design

ERIC Educational Resources Information Center

Ings, Welby

2015-01-01

This article considers the potential of craft processes as creative engagements in graphic design research. It initially discusses the uneasy history of craft within the discipline, then draws upon case studies undertaken by three established designers who, in their postgraduate theses, engaged with craft as a process of thinking. In doing so, the…

Implementation and Initial Validation of the APS English Test [and] The APS English-Writing Test at Golden West College: Evidence for Predictive Validity.

ERIC Educational Resources Information Center

Isonio, Steven

In May 1991, Golden West College (California) conducted a validation study of the English portion of the Assessment and Placement Services for Community Colleges (APS), followed by a predictive validity study in July 1991. The initial study was designed to aid in the implementation of the new test at GWC by comparing data on APS use at other…

Enabling Systemic Change: Creating an ePortfolio Implementation Framework through Design and Development Research for Use by Higher Education Professionals

ERIC Educational Resources Information Center

Blevins, Samantha; Brill, Jennifer

2017-01-01

Drawing from a design and development research approach, specifically model research, this study investigated the perspectives of higher education faculty and administrators regarding their experiences with a university-wide electronic portfolio implementation initiative. Participants in the study were fifty-two faculty and administrators at a…

The Alzheimer's Prevention Initiative Generation Program: Evaluating CNP520 Efficacy in the Prevention of Alzheimer's Disease.

PubMed

Lopez Lopez, C; Caputo, A; Liu, F; Riviere, M E; Rouzade-Dominguez, M-L; Thomas, R G; Langbaum, J B; Lenz, R; Reiman, E M; Graf, A; Tariot, P N

2017-01-01

Alzheimer's disease pathology begins decades before the onset of clinical symptoms. This provides an opportunity for interventional clinical trials to potentially delay or prevent the onset of cognitive impairment or dementia. CNP520 (a beta-site-amyloid precursor protein-cleaving enzyme inhibitor) is in clinical development for the treatment of preclinical Alzheimer's disease under the Alzheimer's Prevention Initiative Generation Program. The Alzheimer's Prevention Initiative is a public-private partnership intended to accelerate the evaluation of Alzheimer's disease prevention therapies. The Generation Program comprises two pivotal phase II/III studies with similar designs to assess the efficacy and safety of investigational treatments in a cognitively unimpaired population at increased risk for developing Alzheimer's disease based on age and apolipoprotein E (APOE) genotype (i.e., presence of the APOE ε4 allele). The program has been designed to maximize benefit to Alzheimer's disease research. Generation Study 1 (NCT02565511) and Generation Study 2 (NCT03131453) are currently enrolling; their key features are presented here.

Active-comparator design and new-user design in observational studies

PubMed Central

Yoshida, Kazuki; Solomon, Daniel H.; Kim, Seoyoung C.

2015-01-01

SUMMARY Over the past decade, an increasing number of observational studies have examined the effectiveness or safety of rheumatoid arthritis treatments. However, unlike randomized controlled trials (RCTs), observational studies of drug effects face methodological challenges including confounding by indication. Two design principles - active comparator design and new user design can help mitigate such challenges in observational studies. To improve validity of study findings, observational studies should be designed in such a way that makes them more closely approximate RCTs. The active comparator design compares the drug of interest to another commonly used agent for the same indication, rather than a ‘non-user’ group. This principle helps select treatment groups similar in treatment indications (both measured and unmeasured characteristics). The new user design includes a cohort of patients from the time of treatment initiation, so that it can assess patients’ pretreatment characteristics and capture all events occurring anytime during follow-up. PMID:25800216

LAM Pilot Study with Imatinib Mesylate (LAMP-1)

DTIC Science & Technology

2017-10-01

AWARD NUMBER: W81XWH-14-1-0132 TITLE: LAM Pilot Study with Imatinib Mesylate (LAMP-1) PRINCIPAL INVESTIGATOR: Charlie Strange, MD...completion dates or the percentage of completion. The LAMP-1 study is designed to generate short-term safety and efficacy data...block the growth of LAM cells through initiation of targeted cell death. This study employs a small clinical trial design using 20 participants at two

Development and evaluation of a study design typology for human research.

PubMed

Carini, Simona; Pollock, Brad H; Lehmann, Harold P; Bakken, Suzanne; Barbour, Edward M; Gabriel, Davera; Hagler, Herbert K; Harper, Caryn R; Mollah, Shamim A; Nahm, Meredith; Nguyen, Hien H; Scheuermann, Richard H; Sim, Ida

2009-11-14

A systematic classification of study designs would be useful for researchers, systematic reviewers, readers, and research administrators, among others. As part of the Human Studies Database Project, we developed the Study Design Typology to standardize the classification of study designs in human research. We then performed a multiple observer masked evaluation of active research protocols in four institutions according to a standardized protocol. Thirty-five protocols were classified by three reviewers each into one of nine high-level study designs for interventional and observational research (e.g., N-of-1, Parallel Group, Case Crossover). Rater classification agreement was moderately high for the 35 protocols (Fleiss' kappa = 0.442) and higher still for the 23 quantitative studies (Fleiss' kappa = 0.463). We conclude that our typology shows initial promise for reliably distinguishing study design types for quantitative human research.

Development and Psychometric Evaluation of the Reasons for Living-Older Adults Scale: A Suicide Risk Assessment Inventory

ERIC Educational Resources Information Center

Edelstein, Barry A.; Heisel, Marnin J.; McKee, Deborah R.; Martin, Ronald R.; Koven, Lesley P.; Duberstein, Paul R.; Britton, Peter C.

2009-01-01

Purpose: The purposes of these studies were to develop and initially evaluate the psychometric properties of the Reasons for Living Scale-Older Adult version (RFL-OA), an older adults version of a measure designed to assess reasons for living among individuals at risk for suicide. Design and Methods: Two studies are reported. Study 1 involved…

The Process of Designing for Learning: Understanding University Teachers' Design Work

ERIC Educational Resources Information Center

Bennett, Sue; Agostinho, Shirley; Lockyer, Lori

2017-01-01

Interest in how to support the design work of university teachers has led to research and development initiatives that include technology-based design-support tools, online repositories, and technical specifications. Despite these initiatives, remarkably little is known about the design work that university teachers actually do. This paper…

An advanced wide area chemical sensor testbed

NASA Astrophysics Data System (ADS)

Seeley, Juliette A.; Kelly, Michael; Wack, Edward; Ryan-Howard, Danette; Weidler, Darryl; O'Brien, Peter; Colonero, Curtis; Lakness, John; Patel, Paras

2005-11-01

In order to meet current and emerging needs for remote passive standoff detection of chemical agent threats, MIT Lincoln Laboratory has developed a Wide Area Chemical Sensor (WACS) testbed. A design study helped define the initial concept, guided by current standoff sensor mission requirements. Several variants of this initial design have since been proposed to target other applications within the defense community. The design relies on several enabling technologies required for successful implementation. The primary spectral component is a Wedged Interferometric Spectrometer (WIS) capable of imaging in the LWIR with spectral resolutions as narrow as 4 cm-1. A novel scanning optic will enhance the ability of this sensor to scan over large areas of concern with a compact, rugged design. In this paper, we shall discuss our design, development, and calibration process for this system as well as recent testbed measurements that validate the sensor concept.

Using Business Cards to Teach Document Design.

ERIC Educational Resources Information Center

Nelson, Ronald J.

1994-01-01

Argues that business cards, as a key means of initiating business contacts, are worth studying in business writing courses. Shows instructors how to incorporate a unit on business card design into their business communications courses. Suggests the criteria by which business cards can be evaluated. (HB)

Head-Up; An interdisciplinary, participatory and co-design process informing the development of a novel head and neck support for people living with progressive neck muscle weakness.

PubMed

Reed, Heath; Langley, Joe; Stanton, Andy; Heron, Nicola; Clarke, Zoe; Judge, Simon; McCarthy, Avril; Squire, Gill; Quinn, Ann; Wells, Oliver; Tindale, Wendy; Baxter, Susan; Shaw, Pamela J; McDermott, Christopher J

2014-01-01

This paper presents the Head-Up project, that aims to provide innovative head support to help improve posture, relieve pain and aid communication for people living with progressive neck muscle weakness. The initial focus is motor neurone disease. The case study illustrates collaborative, interdisciplinary research and new product development underpinned by participatory design. The study was initiated by a 2-day stakeholder workshop followed by early proof-of-concept modelling and patient need evidence building. The work subsequently led to a successful NIHR i4i application funding a 24-month iterative design process, patenting, CE marking and clinical evaluation. The evaluation has informed amendments to the proposed design refered to here as the Sheffield Support Snood (SSS). The outcome positively demonstrates use and performance improvements over current neck orthoses and the process of multidisciplinary and user engagement has created a sense of ownership by MND participants, who have since acted as advocates for the product.

Climate Change Professional Development: Design, Implementation, and Initial Outcomes on Teacher Learning, Practice, and Student Beliefs

NASA Astrophysics Data System (ADS)

Shea, Nicole A.; Mouza, Chrystalla; Drewes, Andrea

2016-04-01

In this work, we present the design, implementation, and initial outcomes of the Climate Academy, a hybrid professional development program delivered through a combination of face-to-face and online interactions, intended to prepare formal and informal science teachers (grades 5-16) in teaching about climate change. The Climate Academy was designed around core elements of successful environmental professional development programs and aligned with practices advocated in benchmarked science standards. Data were collected from multiple sources including observations of professional development events, participants' reflections on their learning, and collection of instructional units designed during the Academy. Data were also collected from a focal case study teacher in a middle school setting. Case study data included classroom observations, teacher interviews, and student beliefs toward climate change. Results indicated that the Climate Academy fostered increased learning among participants of both climate science content and pedagogical strategies for teaching about climate change. Additionally, results indicated that participants applied their new learning in the design of climate change instructional units. Finally, results from the case study indicated positive impacts on student beliefs and greater awareness about climate change. Results have implications for the design of professional development programs on climate change, a topic included for the first time in national standards.

What makes a sustainability tool valuable, practical and useful in real-world healthcare practice? A mixed-methods study on the development of the Long Term Success Tool in Northwest London.

PubMed

Lennox, Laura; Doyle, Cathal; Reed, Julie E; Bell, Derek

2017-09-24

Although improvement initiatives show benefits to patient care, they often fail to sustain. Models and frameworks exist to address this challenge, but issues with design, clarity and usability have been barriers to use in healthcare settings. This work aimed to collaborate with stakeholders to develop a sustainability tool relevant to people in healthcare settings and practical for use in improvement initiatives. Tool development was conducted in six stages. A scoping literature review, group discussions and a stakeholder engagement event explored literature findings and their resonance with stakeholders in healthcare settings. Interviews, small-scale trialling and piloting explored the design and tested the practicality of the tool in improvement initiatives. National Institute for Health Research Collaboration for Leadership in Applied Health Research and Care for Northwest London (CLAHRC NWL). CLAHRC NWL improvement initiative teams and staff. The iterative design process and engagement of stakeholders informed the articulation of the sustainability factors identified from the literature and guided tool design for practical application. Key iterations of factors and tool design are discussed. From the development process, the Long Term Success Tool (LTST) has been designed. The Tool supports those implementing improvements to reflect on 12 sustainability factors to identify risks to increase chances of achieving sustainability over time. The Tool is designed to provide a platform for improvement teams to share their own views on sustainability as well as learn about the different views held within their team to prompt discussion and actions. The development of the LTST has reinforced the importance of working with stakeholders to design strategies which respond to their needs and preferences and can practically be implemented in real-world settings. Further research is required to study the use and effectiveness of the tool in practice and assess engagement with the method over time. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Lighting Control Systems Handbook.

DTIC Science & Technology

1985-06-01

cost, both initial and operating. Initially, the control system designer must collect in- formation and then study and weigh several areas including...8217odLe 045. Pearl Harbor. III: Code 11 Pearl Harbor ar ho I ir I L ’ odk 402. R IYI& [’. Plearl II arbor I II: Li bra ry. Pearl HaIitrbor. I ai

Leadership in an International Collaborative Writing Groups (ICWG) Initiative: Implications for Academic Development

ERIC Educational Resources Information Center

Marquis, Elizabeth; Mårtensson, Katarina; Healey, Mick

2017-01-01

This article presents the results of research examining an innovative initiative designed to build capacity for international, collaborative scholarship of teaching and learning: the development of international collaborative writing groups (ICWG). The study focusses particularly on the role of leadership within the groups as a significant factor…

A Discrepancy in Teachers and Principals Perceptions of Educational Initiatives

ERIC Educational Resources Information Center

Ifat, Linder; Eyal, Weissblueth

2017-01-01

The current study was set to examine the role of school principals in Israel in the professional development process of their teachers following the implementation of a new professional reform. 159 teachers and 13 principals responded to a questionnaire designed to collect data concerning the involvement of principals in initiatives developed by…

A Syllable Segmentation, Letter-Sound, and Initial-Sound Intervention with Students Who Are Deaf or Hard of Hearing and Use Sign Language

ERIC Educational Resources Information Center

Tucci, Stacey L.; Easterbrooks, Susan R.

2015-01-01

This study investigated children's acquisition of three aspects of an early literacy curriculum, "Foundations for Literacy" ("Foundations"), designed specifically for prekindergarten students who are deaf or hard of hearing (DHH): syllable segmentation, identification of letter-sound correspondences, and initial-sound…

Effects of Implementing the Picture Exchange Communication System (PECS) with Adults with Developmental Disabilities and Severe Communication Deficits

ERIC Educational Resources Information Center

Conklin, Carl G.; Mayer, G. Roy

2011-01-01

The purpose of this study is to evaluate the effects of "Picture Exchange Communication System" (PECS) training, using a multiple baseline design on the independent initiations of three adults with developmental disabilities and severe communication deficits. All participants increased their independent initiations, although at different…

The Online Student Connectedness Survey: Evidence of Initial Construct Validity

ERIC Educational Resources Information Center

Zimmerman, Tekeisha; Nimon, Kim

2017-01-01

The Online Student Connectedness Survey (OSCS) was introduced to the academic community in 2012 as an instrument designed to measure feelings of connectedness between students participating in online degree and certification programs. The purpose of this study was to examine data from the instrument for initial evidence of validity and reliability…

Restructuring Kindergarten in an Urban School District: The Case of Newark, New Jersey.

ERIC Educational Resources Information Center

Kopacsi, Rosemarie; Hochwald, Eve

A collaborative project of Bank Street College and the Newark Public Schools, the New Beginnings initiative was designed to bring about progressive restructuring of kindergarten classrooms. This study used a combination of qualitative and quantitative methods to examine the impact of the initiative on curriculum, professional development, and…

Development and Initial Validation of the Psychological Needs Satisfaction Scale in Physical Education

ERIC Educational Resources Information Center

Liu, Jing Dong; Chung, Pak Kwong

2014-01-01

The current study presents the development process and initial validation of a measure designed for assessing psychological needs satisfaction in a secondary school physical education context (Psychological Needs Satisfaction Scale in Physical Education, PNSSPE). Junior secondary school (grades 7 to 9) students (N?=?1,258) were invited to…

Municipal Officials' Participation in Built Environment Policy Development in the United States.

PubMed

Lemon, Stephenie C; Goins, Karin Valentine; Schneider, Kristin L; Brownson, Ross C; Valko, Cheryl A; Evenson, Kelly R; Eyler, Amy A; Heinrich, Katie M; Litt, Jill; Lyn, Rodney; Reed, Hannah L; Tompkins, Nancy O'Hara; Maddock, Jay

2015-01-01

This study examined municipal officials' participation in built environment policy initiatives focused on land use design, transportation, and parks and recreation. Web-based cross-sectional survey. Eighty-three municipalities with 50,000 or more residents in eight states. Four hundred fifty-three elected and appointed municipal officials. Outcomes included self-reported participation in land use design, transportation, and parks and recreation policy to increase physical activity. Independent variables included respondent position; perceptions of importance, barriers, and beliefs regarding physical activity and community design and layout; and physical activity partnership participation. Multivariable logistic regression models. Compared to other positions, public health officials had lower participation in land use design (78.3% vs. 29.0%), transportation (78.1% vs. 42.1%), and parks and recreation (67.1% vs. 26.3%) policy. Perceived limited staff was negatively associated with participation in each policy initiative. Perceptions of the extent to which physical activity was considered in community design and physical activity partnership participation were positively associated with participation in each. Perceived lack of collaboration was associated with less land use design and transportation policy participation, and awareness that community design affects physical activity was associated with more participation. Perceived lack of political will was associated with less parks and recreation policy participation. Public health officials are underrepresented in built environment policy initiatives. Improving collaborations may improve municipal officials' policy participation.

RF Design of a High Average Beam-Power SRF Electron Source

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sipahi, Nihan; Biedron, Sandra; Gonin, Ivan

2016-06-01

There is a significant interest in developing high-average power electron sources, particularly in the area of electron sources integrated with Superconducting Radio Frequency (SRF) systems. For these systems, the electron gun and cathode parts are critical components for stable intensity and high-average powers. In this initial design study, we will present the design of a 9-cell accelerator cavity having a frequency of 1.3 GHz and the corresponding field optimization studies.

PRACA Enhancement Pilot Study Report: Engineering for Complex Systems Program (formerly Design for Safety), DFS-IC-0006

NASA Technical Reports Server (NTRS)

Korsmeyer, David; Schreiner, John

2002-01-01

This technology evaluation report documents the findings and recommendations of the Engineering for Complex Systems Program (formerly Design for Safety) PRACA Enhancement Pilot Study of the Space Shuttle Program's (SSP's) Problem Reporting and Corrective Action (PRACA) System. A team at NASA Ames Research Center (ARC) performed this Study. This Study was initiated as a follow-on to the NASA chartered Shuttle Independent Assessment Team (SIAT) review (performed in the Fall of 1999) which identified deficiencies in the current PRACA implementation. The Pilot Study was launched with an initial qualitative assessment and technical review performed during January 2000 with the quantitative formal Study (the subject of this report) started in March 2000. The goal of the PRACA Enhancement Pilot Study is to evaluate and quantify the technical aspects of the SSP PRACA systems and recommend enhancements to address deficiencies and in preparation for future system upgrades.

Barriers to Student Mobilization and Service at Institutions of Higher Education: A Greenbuilding Initiative Case Study on a Historic, Urban Campus in Charleston, South Carolina, USA

ERIC Educational Resources Information Center

Zimmerman, Katherine S.; Halfacre-Hitchcock, Angela

2006-01-01

Purpose: To identify some of the barriers to mobilizing students of higher education in sustainable initiatives, in order to enhance project success on campuses. Design/methodology/approach: Uses a case study of a model green building retrofit on the College of Charleston campus in Charleston, South Carolina, USA. Several constraints already…

A Longitudinal Study of Mental Health Consumer/Survivor Initiatives: Part 2--A Quantitative Study of Impacts of Participation on New Members

ERIC Educational Resources Information Center

Nelson, Geoffrey; Ochocka, Joanna; Janzen, Rich; Trainor, John

2006-01-01

To evaluate the impacts of participation in mental health Consumer/Survivor Initiatives (CSIs), we used a nonequivalent control group design to compare new, active participants in CSIs ( n = 61) with nonactive participants ( n = 57) at baseline, 9-month, and 18-month follow-up intervals. The two groups were comparable at baseline on a wide range…

Augmented Reality M-Learning to Enhance Nursing Skills Acquisition in the Clinical Skills Laboratory

ERIC Educational Resources Information Center

Garrett, Bernard M.; Jackson, Cathryn; Wilson, Brian

2015-01-01

Purpose: This paper aims to report on a pilot research project designed to explore if new mobile augmented reality (AR) technologies have the potential to enhance the learning of clinical skills in the lab. Design/methodology/approach: An exploratory action-research-based pilot study was undertaken to explore an initial proof-of-concept design in…

Students as Producers: An "X" Disciplinary Client-Based Approach to Collaborative Art, Design and Media Pedagogy

ERIC Educational Resources Information Center

Cocchiarella, Fabrizio; Booth, Paul

2015-01-01

This article presents the findings of a cross-disciplinary project between BA (Hons) Interior Design, Creative Multimedia and Film and Media Studies at a large Metropolitan University in the North of England. The collaboration was part of Unit X, a faculty-wide credit-bearing initiative to enable better collaboration across art and design courses.…

Building a Better Mousetrap: How Design-Based Research Was Used to Improve Homemade PowerPoint Games

ERIC Educational Resources Information Center

Siko, Jason P.; Barbour, Michael K.

2016-01-01

This paper is a review of a three-cycle, design-based research study that explored the relationship between the pedagogical research and the actual implementation of a game design project using Microsoft PowerPoint. Much of the initial literature on using homemade PowerPoint games showed no significant improvement in test scores when students…

Conceptualizing Youth Empowerment within Tobacco Control

ERIC Educational Resources Information Center

Holden, Debra J.; Messeri, Peter; Evans, W. Douglas; Crankshaw, Erik; Ben-Davies, Maureen

2004-01-01

This article presents a conceptual framework that was developed to guide a national evaluation of the American Legacy Foundation's (Legacy) Statewide Youth Movement Against Tobacco Use (SYMATU) program. This program was designed to develop youth-led, youth-directed initiatives within local communities. Two evaluation studies were designed and…

Design Thinking Accelerated Leadership: Transforming Self, Transforming Community

ERIC Educational Resources Information Center

Lake, Danielle; Ricco, Michael E.; Whipps, Judy

2016-01-01

Higher education institutions are continually seeking to recruit nontraditional adult students yet struggle at the same time to meet their needs effectively. The following case study offers strategies to address this situation by documenting the pedagogical design and initial outcomes of an interdisciplinary, nineteen-month leadership-themed…

Impact of Various Compaction Equipment on Hot-Mix Asphalt (HMA) Design in Ohio.

DOT National Transportation Integrated Search

1998-09-01

The study was initiated to examine the effect of different laboratory compaction devices on density, air voids, and optimum asphalt binder content for mixes designed for heavy volume traffic that are currently used in Ohio. A total of six and twelve ...

A leadership challenge: staff nurse perceptions after an organizational TeamSTEPPS initiative.

PubMed

Castner, Jessica; Foltz-Ramos, Kelly; Schwartz, Diane G; Ceravolo, Diane J

2012-10-01

The purpose of this study was to measure RNs' perceptions of teamwork skills and behaviors in their work environment during a multiphase multisite nursing organizational teamwork development initiative. Teamwork is essential for patient safety in healthcare organizations and nursing teams. Organizational development supporting effective teamwork should include a just culture, engaged leadership, and teamwork training. A cross-sectional survey study of bedside RNs was conducted in one 5-hospital healthcare system after a TeamSTEPPS teamwork training initiative. TeamSTEPPS teamwork training related to improved RN perceptions of leadership. Initiatives to align the perspectives and teamwork efforts of leaders and bedside nurses are indicated and should involve charge nurses in the design.

40 CFR Appendix D to Part 132 - Great Lakes Water Quality Initiative Methodology for the Development of Wildlife Criteria

Code of Federal Regulations, 2014 CFR

2014-07-01

...-conducted study of 90 days or greater designed to observe subchronic or chronic effects as defined in this document. 2. The avian data must come from at least one well-conducted study of 70 days or greater designed... poorly defined comparative toxicokinetic and toxicodynamic parameters between mammals and birds. However...

40 CFR Appendix D to Part 132 - Great Lakes Water Quality Initiative Methodology for the Development of Wildlife Criteria

Code of Federal Regulations, 2011 CFR

2011-07-01

...-conducted study of 90 days or greater designed to observe subchronic or chronic effects as defined in this document. 2. The avian data must come from at least one well-conducted study of 70 days or greater designed... poorly defined comparative toxicokinetic and toxicodynamic parameters between mammals and birds. However...

40 CFR Appendix D to Part 132 - Great Lakes Water Quality Initiative Methodology for the Development of Wildlife Criteria

Code of Federal Regulations, 2012 CFR

2012-07-01

...-conducted study of 90 days or greater designed to observe subchronic or chronic effects as defined in this document. 2. The avian data must come from at least one well-conducted study of 70 days or greater designed... poorly defined comparative toxicokinetic and toxicodynamic parameters between mammals and birds. However...

40 CFR Appendix D to Part 132 - Great Lakes Water Quality Initiative Methodology for the Development of Wildlife Criteria

Code of Federal Regulations, 2013 CFR

2013-07-01

...-conducted study of 90 days or greater designed to observe subchronic or chronic effects as defined in this document. 2. The avian data must come from at least one well-conducted study of 70 days or greater designed... poorly defined comparative toxicokinetic and toxicodynamic parameters between mammals and birds. However...

40 CFR Appendix D to Part 132 - Great Lakes Water Quality Initiative Methodology for the Development of Wildlife Criteria

Code of Federal Regulations, 2010 CFR

2010-07-01

...-conducted study of 90 days or greater designed to observe subchronic or chronic effects as defined in this document. 2. The avian data must come from at least one well-conducted study of 70 days or greater designed... poorly defined comparative toxicokinetic and toxicodynamic parameters between mammals and birds. However...

Scale Development and Initial Tests of the Multidimensional Complex Adaptive Leadership Scale for School Principals: An Exploratory Mixed Method Study

ERIC Educational Resources Information Center

Özen, Hamit; Turan, Selahattin

2017-01-01

This study was designed to develop the scale of the Complex Adaptive Leadership for School Principals (CAL-SP) and examine its psychometric properties. This was an exploratory mixed method research design (ES-MMD). Both qualitative and quantitative methods were used to develop and assess psychometric properties of the questionnaire. This study…

A Case Study in Collaboration: Looking Back at the National Graphic Design Archive

ERIC Educational Resources Information Center

Remington, R. Roger

2004-01-01

Inspired by the 1980s interest in graphic design history, an initially productive, but difficult to sustain, collaboration among three American universities from the late 1980s to the mid-1990s, is the subject of this case study. The ideas behind a much-needed archival consortium, its organization and its difficulties in sustaining collaboration…

A case report of evaluating a large-scale health systems improvement project in an uncontrolled setting: a quality improvement initiative in KwaZulu-Natal, South Africa.

PubMed

Mate, Kedar S; Ngidi, Wilbroda Hlolisile; Reddy, Jennifer; Mphatswe, Wendy; Rollins, Nigel; Barker, Pierre

2013-11-01

New approaches are needed to evaluate quality improvement (QI) within large-scale public health efforts. This case report details challenges to large-scale QI evaluation, and proposes solutions relying on adaptive study design. We used two sequential evaluative methods to study a QI effort to improve delivery of HIV preventive care in public health facilities in three districts in KwaZulu-Natal, South Africa, over a 3-year period. We initially used a cluster randomised controlled trial (RCT) design. During the RCT study period, tensions arose between intervention implementation and evaluation design due to loss of integrity of the randomisation unit over time, pressure to implement changes across the randomisation unit boundaries, and use of administrative rather than functional structures for the randomisation. In response to this loss of design integrity, we switched to a more flexible intervention design and a mixed-methods quasiexperimental evaluation relying on both a qualitative analysis and an interrupted time series quantitative analysis. Cluster RCT designs may not be optimal for evaluating complex interventions to improve implementation in uncontrolled 'real world' settings. More flexible, context-sensitive evaluation designs offer a better balance of the need to adjust the intervention during the evaluation to meet implementation challenges while providing the data required to evaluate effectiveness. Our case study involved HIV care in a resource-limited setting, but these issues likely apply to complex improvement interventions in other settings.

The effect of family policies and public health initiatives on breastfeeding initiation among 18 high-income countries: a qualitative comparative analysis research design.

PubMed

Lubold, Amanda Marie

2017-01-01

The objective of this study is to examine the effects of macro-level factors - welfare state policies and public health initiatives - on breastfeeding initiation among eighteen high-income countries. This study utilizes fuzzy-set Qualitative Comparative Analysis methods to examine the combinations of conditions leading to both high and low national breastfeeding initiation rates among eighteen high-income countries. The most common pathway leading to high breastfeeding initiation is the combination of conditions including a high percentage of women in parliament, a low national cesarean section rate, and either low family spending, high rates of maternity leave, or high rates of women working part-time. The most common pathway leading to low breastfeeding initiation includes the necessary condition of low national adherence to the Baby-Friendly Hospital Initiative. This research suggests that there is a connection between broad level welfare state polices, public health initiatives, and breastfeeding initiation. Compliance with the WHO/UNICEF initiatives depends on welfare regime policies and overall support for women in both productive and reproductive labor.

Sustainable Design Approach: A case study of BIM use

NASA Astrophysics Data System (ADS)

Abdelhameed, Wael

2017-11-01

Achieving sustainable design in areas such as energy-efficient design depends largely on the accuracy of the analysis performed after the design is completed with all its components and material details. There are different analysis approaches and methods that predict relevant values and metrics such as U value, energy use and energy savings. Although certain differences in the accuracy of these approaches and methods have been recorded, this research paper does not focus on such matter, where determining the reason for discrepancies between those approaches and methods is difficult, because all error sources act simultaneously. The research paper rather introduces an approach through which BIM, building information modelling, can be utilised during the initial phases of the designing process, by analysing the values and metrics of sustainable design before going into the design details of a building. Managing all of the project drawings in a single file, BIM -building information modelling- is well known as one digital platform that offers a multidisciplinary detailed design -AEC model (Barison and Santos, 2010, Welle et.al., 2011). The paper presents in general BIM use in the early phases of the design process, in order to achieve certain required areas of sustainable design. The paper proceeds to introduce BIM use in specific areas such as site selection, wind velocity and building orientation, in terms of reaching the farther possible sustainable solution. In the initial phases of designing, material details and building components are not fully specified or selected yet. The designer usually focuses on zoning, topology, circulations, and other design requirements. The proposed approach employs the strategies and analysis of BIM use during those initial design phases in order to have the analysis and results of each solution or alternative design. The stakeholders and designers would have a better effective decision making process with a full clarity of each alternative's consequences. The architect would settle down and proceed in the alternative design of the best sustainable analysis. In later design stages, using the sustainable types of materials such as insulation, cladding, etc., and applying sustainable building components such as doors, windows, etc. would add more improvements and enhancements in reaching better values and metrics. The paper describes the methodology of this design approach through BIM strategies adopted in design creation. Case studies of architectural designs are used to highlight the details and benefits of this proposed approach.

Initial glenoid fixation using two different reverse shoulder designs with an equivalent center of rotation in a low-density and high-density bone substitute.

PubMed

Stroud, Nicholas J; DiPaola, Matthew J; Martin, Brian L; Steiler, Cindy A; Flurin, Pierre-Henri; Wright, Thomas W; Zuckerman, Joseph D; Roche, Christopher P

2013-11-01

Numerous glenoid implant designs have been introduced into the global marketplace in recent years; however, little comparative biomechanical data exist to substantiate one design consideration over another. This study dynamically evaluated reverse shoulder glenoid baseplate fixation and compared the initial fixation associated with 2 reverse shoulder designs having an equivalent center of rotation in low-density and high-density bone substitute substrates. Significant differences in fixation were observed between implant designs, where the circular-porous reverse shoulder was associated with approximately twice the micromotion per equivalent test than the oblong-grit-blasted design. Additionally, 6 of the 7 circular-porous reverse shoulders failed catastrophically in the low-density bone model at an average of 2603 ± 981 cycles. None of the oblong-grit-blasted designs failed in the low-or high-density bone models and none of the circular-porous designs failed in the high-density bone models after 10,000 cycles of loading. These results demonstrate that significant differences in initial fixation exist between reverse shoulder implants having an equivalent center of rotation and suggest that design parameters, other than the position of the center of rotation, significantly affect fixation in low-density and high-density polyurethane bone substitutes. Subtle changes in glenoid baseplate design can dramatically affect fixation, particularly in low-density bone substitutes that are intended to simulate the bone quality of the recipient population for reverse shoulders. Copyright © 2013 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

A manned lunar outpost. Design considerations for three key elements in an initial manned lunar outpost

NASA Technical Reports Server (NTRS)

Bell, Larry; Trotti, Guillermo; Brown, Jeff; Bhattacharya, Nilajan; Moore, Nathan; Polette, Tom; Toups, Larry

1988-01-01

The Initial Manned Lunar Outpost (IMLO) is proposed as the initial permanent base for manned activities on the Moon. The study concentrated on identifying the equipment, support systems, and initial base configuration necessary to accomplish the various science, industrial and exploration activities planned. The primary concepts of the MLO were the use of hard modules for habitation areas creating a flexible, modular transportation system; designing a multi-functional vehicle; and using an overhead radiation protection system. The transportation system, dubbed the Lunar Mobile Surface Transport System (LMSTS), carries the hard modules to the surface of the moon and provides a method to move them to the desired location through the use of interchangeable pallets. The avionics pallets are changed-out with wheel and hitch pallets, transforming the LMSTS into a "tractor trailer" used with the Multi-Functional Vehicle (MFV). The modules are placed under the Regolith Support Structure (RSS) which provides a stable environment and radiation protection for the entire base. The overhead structure was chosen over simply burying the modules to provide a study on the advantages and disadvantages of this type of system. The advantages include easy access to the exterior of the modules, providing a protected area for vehicles and equipment used in EVA, and creating an area of constant temperature. Disadvantages include a need for prefabrication of structural components, including the preconstruction and construction phases of the initial MLO. The design approach taken considered existing and near-term materials and technology only, without the consideration of possible future building technologies.

The Parametric Study and Fine-Tuning of Bow-Tie Slot Antenna with Loaded Stub

PubMed Central

2017-01-01

A printed Bow-Tie slot antenna with loaded stub is proposed and the effects of changing the dimensions of the slot area, the stub and load sizes are considered in this paper. These parameters have a considerable effect on the antenna characteristics as well as its performance. An in-depth parametric study of these dimensions is presented. This paper proposes the necessary conditions for initial approximation of dimensions needed to design this antenna. In order to achieve the desired performance of the antenna fine tuning of all sizes of these parameters is required. The parametric studies used in this paper provide proper trends for initiation and tuning the design. A prototype of the antenna for 1.7GHz to 2.6GHz band is fabricated. Measurements conducted verify that the designed antenna has wideband characteristics with 50% bandwidth around the center frequency of 2.1GHz. Conducted measurements for reflection coefficient (S11) and radiation pattern also validate our simulation results. PMID:28114354

The Parametric Study and Fine-Tuning of Bow-Tie Slot Antenna with Loaded Stub.

PubMed

Shafiei, M M; Moghavvemi, Mahmoud; Wan Mahadi, Wan Nor Liza

2017-01-01

A printed Bow-Tie slot antenna with loaded stub is proposed and the effects of changing the dimensions of the slot area, the stub and load sizes are considered in this paper. These parameters have a considerable effect on the antenna characteristics as well as its performance. An in-depth parametric study of these dimensions is presented. This paper proposes the necessary conditions for initial approximation of dimensions needed to design this antenna. In order to achieve the desired performance of the antenna fine tuning of all sizes of these parameters is required. The parametric studies used in this paper provide proper trends for initiation and tuning the design. A prototype of the antenna for 1.7GHz to 2.6GHz band is fabricated. Measurements conducted verify that the designed antenna has wideband characteristics with 50% bandwidth around the center frequency of 2.1GHz. Conducted measurements for reflection coefficient (S11) and radiation pattern also validate our simulation results.

Marginal Structural Models for Case-Cohort Study Designs to Estimate the Association of Antiretroviral Therapy Initiation With Incident AIDS or Death

PubMed Central

Cole, Stephen R.; Hudgens, Michael G.; Tien, Phyllis C.; Anastos, Kathryn; Kingsley, Lawrence; Chmiel, Joan S.; Jacobson, Lisa P.

2012-01-01

To estimate the association of antiretroviral therapy initiation with incident acquired immunodeficiency syndrome (AIDS) or death while accounting for time-varying confounding in a cost-efficient manner, the authors combined a case-cohort study design with inverse probability-weighted estimation of a marginal structural Cox proportional hazards model. A total of 950 adults who were positive for human immunodeficiency virus type 1 were followed in 2 US cohort studies between 1995 and 2007. In the full cohort, 211 AIDS cases or deaths occurred during 4,456 person-years. In an illustrative 20% random subcohort of 190 participants, 41 AIDS cases or deaths occurred during 861 person-years. Accounting for measured confounders and determinants of dropout by inverse probability weighting, the full cohort hazard ratio was 0.41 (95% confidence interval: 0.26, 0.65) and the case-cohort hazard ratio was 0.47 (95% confidence interval: 0.26, 0.83). Standard multivariable-adjusted hazard ratios were closer to the null, regardless of study design. The precision lost with the case-cohort design was modest given the cost savings. Results from Monte Carlo simulations demonstrated that the proposed approach yields approximately unbiased estimates of the hazard ratio with appropriate confidence interval coverage. Marginal structural model analysis of case-cohort study designs provides a cost-efficient design coupled with an accurate analytic method for research settings in which there is time-varying confounding. PMID:22302074

Human Mars Lander Design for NASA's Evolvable Mars Campaign

NASA Technical Reports Server (NTRS)

Polsgrove, Tara; Chapman, Jack; Sutherlin, Steve; Taylor, Brian; Fabisinski, Leo; Collins, Tim; Cianciolo Dwyer, Alicia; Samareh, Jamshid; Robertson, Ed; Studak, Bill;

Construction and Initial Tests of MAIZE: 1 MA LTD-Driven Z-Pinch *

NASA Astrophysics Data System (ADS)

Gilgenbach, R. M.; Gomez, M. R.; Zier, J. C.; Tang, W.; French, D. M.; Lau, Y. Y.; Mazarakis, M. G.; Cuneo, M. E.; Johnston, M. D.; Oliver, B. V.; Mehlhorn, T. A.; Kim, A. A.; Sinebryukhov, V. A.

2008-11-01

We report construction and initial testing of a 1-MA Linear Transformer Driver (LTD), The Michigan Accelerator for Inductive Z-pinch Experiments, (MAIZE). This machine, the first of its type to reach the USA, is based on the joint HCEI, Sandia Laboratories, and UM development effort. The compact LTD uses 80 capacitors and 40 spark gap switches, in 40 ``bricks'', to deliver 1 MA, 100 kV pulses with 70 ns risetime into a matched resistive load. Test results will be presented for a single brick and the full LTD. Design and construction will be presented of a low-inductance MITL. Experimental research programs under design and construction at UM include: a) Studies of Magneto-Raleigh-Taylor Instability of planar foils, and b) Vacuum convolute studies including cathode and anode plasma. Theory and simulation results will be presented for these planned experiments. Initial experimental designs and moderate-current feasibility experiments will be discussed. *Research supported by U. S. DoE through Sandia National Laboratories award document numbers 240985, 768225, 790791 and 805234 to the UM. MRG supported by NNSA Fellowship and JCZ supported by NPSC Fellowship / Sandia National Labs.

Design of helicopter rotors to noise constraints

NASA Technical Reports Server (NTRS)

Schaeffer, E. G.; Sternfeld, H., Jr.

1978-01-01

Results of the initial phase of a research project to study the design constraints on helicopter noise are presented. These include the calculation of nonimpulsive rotor harmonic and broadband hover noise spectra, over a wide range of rotor design variables and the sensitivity of perceived noise level (PNL) to changes in rotor design parameters. The prediction methodology used correlated well with measured whirl tower data. Application of the predictions to variations in rotor design showed tip speed and thrust as having the most effect on changing PNL.

Annual Report to the Strategic Defense Initiative Organization on the Free-Electron Laser Driven by the NIST CW Microtron

DTIC Science & Technology

1986-05-05

design of the injector for the method selected was completed. A study on the problem of mirror damage has been completed, and commercial suppliers of... mirrors that can withstand the high intracavity power of the FEL have been identified. The design of the room in which the FEL is located has been...Appendices ............ ............................. .25 A. Design Note 10 - Mirror Damage B. Design Note 11 - Wiggler Field Errors C. Design Note 12

Optimization of green infrastructure network at semi-urbanized watersheds to manage stormwater volume, peak flow and life cycle cost: Case study of Dead Run watershed in Maryland

NASA Astrophysics Data System (ADS)

Heidari Haratmeh, B.; Rai, A.; Minsker, B. S.

2016-12-01

Green Infrastructure (GI) has become widely known as a sustainable solution for stormwater management in urban environments. Despite more recognition and acknowledgment, researchers and practitioners lack clear and explicit guidelines on how GI practices should be implemented in urban settings. This study is developing a noisy-based multi-objective, multi-scaled genetic algorithm that determines optimal GI networks for environmental, economic and social objectives. The methodology accounts for uncertainty in modeling results and is designed to perform at sub-watershed as well as patch scale using two different simulation models, SWMM and RHESSys, in a Cloud-based implementation using a Web interface. As an initial case study, a semi-urbanized watershed— DeadRun 5— in Baltimore County, Maryland, is selected. The objective of the study is to minimize life cycle cost, maximize human preference for human well-being and the difference between pre-development hydrographs generated from current rainfall events and design storms, as well as those that result from proposed GI scenarios. Initial results for DeadRun5 watershed suggest that placing GI in the proximity of the watershed outlet optimizes life cycle cost, stormwater volume, and peak flow capture. The framework can easily present outcomes of GI design scenarios to both designers and local stakeholders, and future plans include receiving feedback from users on candidate designs, and interactively updating optimal GI network designs in a crowd-sourced design process. This approach can also be helpful in deriving design guidelines that better meet stakeholder needs.

COMMUNITY-BASED WATERSHED MANAGEMENT: CREATING A TOOL FOR PROGRAM EVALUATION AND DESIGN

EPA Science Inventory

The criteria will be assembled into a manual to be used by community organizers, academics, managers, or policy makers in evaluating community-based watershed management initiatives and in designing new watershed management programs. The case study will also be added to the b...

Three Cases of Teachers' Collaborative Design: Perspectives from Those Involved

ERIC Educational Resources Information Center

Preciado-Babb, Armando Paulino; Liljedahl, Peter

2012-01-01

We present the perspectives of teachers and others involved in the collaborative design of teaching and learning artifacts across three cases: (a) an independent group participating in lesson study; (b) teachers participating in professional development programs; and (c) a district initiative for producing numeracy tasks. Among the results we…

Soundstop. An Experimental Student Housing Study.

ERIC Educational Resources Information Center

Ontario Dept. of Education, Toronto. School Planning and Building Research Section.

The design development of a housing facility for deaf and blind students is reviewed in considerable detail. Initially traditional architectural solutions to the creation of dormitory space and accompanying circulation patterns are examined for their effect upon the lives of the inhabitants. The subsequent design progression which is presented is…

Capturing Teachers' Experience of Learning Design through Case Studies

ERIC Educational Resources Information Center

Masterman, Elizabeth; Jameson, Jill; Walker, Simon

2009-01-01

This article distinguishes three dimensions to learning design: a technological infrastructure, a conceptual framework for practice that focuses on the creation of structured sequences of learning activities, and a way to represent and share practice through the use of mediating artefacts. Focusing initially on the second of these dimensions, the…

Technological Discontinuities and Dominant Designs: A Cyclical Model of Technological Change.

ERIC Educational Resources Information Center

Anderson, Philip; Tushman, Michael L.

1990-01-01

Based on longitudinal studies of the cement, glass, and minicomputer industries, this article proposes a technological change model in which a technological breakthrough, or discontinuity, initiates an era of intense technical variation and selection, culminating in a single dominant design and followed by a period of incremental technical…

Designing Professional Learning Communities through Understanding the Beliefs of Learning

ERIC Educational Resources Information Center

Ke, Jie; Kang, Rui; Liu, Di

2016-01-01

This study was designed to initiate the process of building professional development learning communities for pre-service math teachers through revealing those teachers' conceptions/beliefs of students' learning and their own learning in China. It examines Chinese pre-service math teachers' conceptions of student learning and their related…

A GUIDE FOR PLANNING PHYSICAL EDUCATION AND ATHLETIC FACILITIES.

ERIC Educational Resources Information Center

New Jersey State Dept. of Education, Trenton.

THIS STUDY EXAMINES PHYSICAL EDUCATION FACILITIES, THEIR PHYSICAL NEEDS, AND RELATED DESIGN CONSIDERATIONS. A SYSTEM OF DETERMINING THE TOTAL NUMBER OF TEACHING STATIONS NEEDED IS GIVEN TO AID INITIAL REQUIREMENT ANALYSIS. INDOOR FACILITIES ANALYZED INCLUDE--(1) THE GYMNASIUM, IN TERMS OF LOCATION, SIZE, DESIGN FEATURES, AND RELATED COMPONENTS,…

Conceptual design study Science and Application Space Platform SASP. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Runge, F. C.

1980-01-01

The system design philosphy applied in the development of this platform concept is summarized. The system is to provide for simple, low cost, initial capability of accommodating Spacelab payloads that are modified for long duration flight. The supporting research and technology are also summarized.

Brief Report: Testing the Impairment of Initiation Processes Hypothesis in Autism Spectrum Disorder

ERIC Educational Resources Information Center

Carmo, Joana C.; Duarte, Elsa; Souza, Cristiane; Pinho, Sandra; Filipe, Carlos N.

2017-01-01

In the present study we aim at providing further evidences for the validity of an initiation processes impairment in autism spectrum disorder (ASD). We applied different verbal fluency tasks designed to decrease or enhance this limitation. A group of high-functioning individuals with ASD and a group of typically developed individuals matched for…

Swimming against the Tide: Characteristics of Muslim-Arab Women in Israel Who Initiated Divorce

ERIC Educational Resources Information Center

Kulik, Liat; Klein, Dana

2010-01-01

The present study compared Muslim-Arab women in Israel who initiated divorce (n=45) with those who stayed in stressful marital relationships (n=46). Based on an ecological approach and using a cross-sectional design, we explored the differences between the two groups with regard to the following variables: personal resources (education, paid…

Development and Initial Validation of the Chinese Version of Psychological Needs Thwarting Scale in Physical Education

ERIC Educational Resources Information Center

Liu, Jing Dong; Chung, Pak-Kwong

2015-01-01

The current study presents the development process and initial validation of a measure designed for assessing psychological needs thwarting (frustration) in a secondary school physical education context (Psychological Needs Thwarting Scale in Physical Education, PNTSPE). Secondary school students (grades 7-9) from Hong Kong (N = 1258) were invited…

Capacitance discharge system for ignition of Single Bridge Apollo Standard Initiators (SBASI)

NASA Technical Reports Server (NTRS)

Ward, R. D.

1974-01-01

The design support data developed during the single bridge Apollo standard initiator (SBASI) program are presented. A circuit was designed and bread-board tested to verify operational capabilities of the circuit. Test data, design criteria, weight, and reliability trade-off considerations, and final design recommendations are reported.

Six ways not to improve patient flow: a qualitative study.

PubMed

Kreindler, Sara Adi

2017-05-01

Although well-established principles exist for improving the timeliness and efficiency of care, many organisations struggle to achieve more than small-scale, localised gains. Where care processes are complex and include segments under different groups' control, the elegant solutions promised by improvement methodologies remain elusive. This study sought to identify common design flaws that limit the impact of flow initiatives. This qualitative study was conducted within an explanatory case study of a Canadian regional health system in which multitudinous flow initiatives had yielded no overall improvement in system performance. Interviews with 62 senior, middle and departmental managers, supplemented by ∼700 documents on flow initiatives, were analysed using the constant comparative method. Findings suggested that smooth flow depends on linking a defined population to appropriate capacity by means of an efficient process ; flawed initiatives reflected failure to consider one or more of these essential elements. Many initiatives focused narrowly on process, failing to consider that the intended population was poorly defined or the needed capacity inaccessible; some introduced capacity for an intended population, but offered no process to link the two. Moreover, interveners were unable to respond effectively when a bottleneck moved to another part of the system. Errors of population, capacity and process, in different combinations, generated six 'formulae for failure'. Typically, flawed initiatives focused on too small a segment of the patient journey to properly address the impediments to flow. The proliferation of narrowly focused initiatives, in turn, reflected a decentralised system in which responsibility for flow improvement was fragmented. Thus, initiatives' specific design flaws may have their roots in a deeper problem: the lack of a coherent system-level strategy. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Cost Sharing, Family Health Care Burden, and the Use of Specialty Drugs for Rheumatoid Arthritis

PubMed Central

Karaca-Mandic, Pinar; Joyce, Geoffrey F; Goldman, Dana P; Laouri, Marianne

2010-01-01

Objectives To examine the impact of benefit generosity and household health care financial burden on the demand for specialty drugs in the treatment of rheumatoid arthritis (RA). Data Sources/Study Setting Enrollment, claims, and benefit design information for 35 large private employers during 2000–2005. Study Design We estimated multivariate models of the effects of benefit generosity and household financial burden on initiation and continuation of biologic therapies. Data Extraction Methods We defined initiation of biologic therapy as first-time use of etanercept, adalimumab, or infliximab, and we constructed an index of plan generosity based on coverage of biologic therapies in each plan. We estimated the household's burden by summing up the annual out-of-pocket (OOP) expenses of other family members. Principal Findings Benefit generosity affected both the likelihood of initiating a biologic and continuing drug therapy, although the effects were stronger for initiation. Initiation of a biologic was lower in households where other family members incurred high OOP expenses. Conclusions The use of biologic therapy for RA is sensitive to benefit generosity and household financial burden. The increasing use of coinsurance rates for specialty drugs (as under Medicare Part D) raises concern about adverse health consequences. PMID:20831715

A Systematic Review of Interventions to Improve Initiation of Mental Health Care Among Racial-Ethnic Minority Groups.

PubMed

Lee-Tauler, Su Yeon; Eun, John; Corbett, Dawn; Collins, Pamela Y

2018-06-01

The objective of this systematic review was to identify interventions to improve the initiation of mental health care among racial-ethnic minority groups. The authors searched three electronic databases in February 2016 and independently assessed eligibility of 2,065 titles and abstracts on the basis of three criteria: the study design included an intervention, the participants were members of racial-ethnic minority groups and lived in the United States, and the outcome measures included initial access to or attitudes toward mental health care. The qualitative synthesis involved 29 studies. Interventions identified included collaborative care (N=10), psychoeducation (N=7), case management (N=5), colocation of mental health services within existing services (N=4), screening and referral (N=2), and a change in Medicare medication reimbursement policy that served as a natural experiment (N=1). Reduction of disparities in the initiation of antidepressants or psychotherapy was noted in seven interventions (four involving collaborative care, two involving colocation of mental health services, and one involving screening and referral). Five of these disparities-reducing interventions were tested among older adults only. Most (N=23) interventions incorporated adaptations designed to address social or cultural barriers to care. Interventions that used a model of integrated care reduced racial-ethnic disparities in the initiation of mental health care.

Usability engineering for augmented reality: employing user-based studies to inform design.

PubMed

Gabbard, Joseph L; Swan, J Edward

2008-01-01

A major challenge, and thus opportunity, in the field of human-computer interaction and specifically usability engineering is designing effective user interfaces for emerging technologies that have no established design guidelines or interaction metaphors or introduce completely new ways for users to perceive and interact with technology and the world around them. Clearly, augmented reality is one such emerging technology. We propose a usability engineering approach that employs user-based studies to inform design, by iteratively inserting a series of user-based studies into a traditional usability engineering lifecycle to better inform initial user interface designs. We present an exemplar user-based study conducted to gain insight into how users perceive text in outdoor augmented reality settings and to derive implications for design in outdoor augmented reality. We also describe lessons learned from our experiences conducting user-based studies as part of the design process.

Toxic Hazards Research Unit 1989

DTIC Science & Technology

1990-10-01

frequently be developed to drive the experimental design and to assist in risk avsessments. The Toxic Hazards Division, Harry G. Armstrong Aerospace...postexposure, respectively. The experimental design (Section 3.3, Subchronic Inhalation Toxicity Studies on 3.1 Oil at Concentrations of 250, 50, and...sodium salt and the pH was adjusted to 7.4. 101 EXPERIMENTAL DESIGN Initiation Assessment A total of seven groups consisting of eight animals per

Writing-Intensive Approaches in a Typographic Design Studio Class: Using Writing as a Tool toward More Intentional Design

ERIC Educational Resources Information Center

Fowler, Michael

2015-01-01

Taking advantage of a university-wide initiative that requires all students during their course of study to take at least one of their writing intensive classes in their major, the author relates how he was spurred to formulate one of his graphic design studio classes to accommodate the writing-intensive requirement. He had been intuitively…

Ensemble-based flash-flood modelling: Taking into account hydrodynamic parameters and initial soil moisture uncertainties

NASA Astrophysics Data System (ADS)

Edouard, Simon; Vincendon, Béatrice; Ducrocq, Véronique

2018-05-01

Intense precipitation events in the Mediterranean often lead to devastating flash floods (FF). FF modelling is affected by several kinds of uncertainties and Hydrological Ensemble Prediction Systems (HEPS) are designed to take those uncertainties into account. The major source of uncertainty comes from rainfall forcing and convective-scale meteorological ensemble prediction systems can manage it for forecasting purpose. But other sources are related to the hydrological modelling part of the HEPS. This study focuses on the uncertainties arising from the hydrological model parameters and initial soil moisture with aim to design an ensemble-based version of an hydrological model dedicated to Mediterranean fast responding rivers simulations, the ISBA-TOP coupled system. The first step consists in identifying the parameters that have the strongest influence on FF simulations by assuming perfect precipitation. A sensitivity study is carried out first using a synthetic framework and then for several real events and several catchments. Perturbation methods varying the most sensitive parameters as well as initial soil moisture allow designing an ensemble-based version of ISBA-TOP. The first results of this system on some real events are presented. The direct perspective of this work will be to drive this ensemble-based version with the members of a convective-scale meteorological ensemble prediction system to design a complete HEPS for FF forecasting.

Evaluating a complex, multi-site, community-based program to improve healthcare quality: the summative research design for the Aligning Forces for Quality initiative.

PubMed

Scanlon, Dennis P; Wolf, Laura J; Alexander, Jeffrey A; Christianson, Jon B; Greene, Jessica; Jean-Jacques, Muriel; McHugh, Megan; Shi, Yunfeng; Leitzell, Brigitt; Vanderbrink, Jocelyn M

2016-08-01

The Aligning Forces for Quality (AF4Q) initiative was the Robert Wood Johnson Foundation's (RWJF's) signature effort to increase the overall quality of healthcare in targeted communities throughout the country. In addition to sponsoring this 16-site complex program, RWJF funded an independent scientific evaluation to support objective research on the initiative's effectiveness and contributions to basic knowledge in 5 core programmatic areas. The research design, data, and challenges faced during the summative evaluation phase of this near decade-long program are discussed. A descriptive overview of the summative research design and its development for a multi-site, community-based, healthcare quality improvement initiative is provided. The summative research design employed by the evaluation team is discussed. The evaluation team's summative research design involved a data-driven assessment of the effectiveness of the AF4Q program at large, assessments of the impact of AF4Q in the specific programmatic areas, and an assessment of how the AF4Q alliances were positioned for the future at the end of the program. The AF4Q initiative was the largest privately funded community-based healthcare improvement initiative in the United States to date and was implemented at a time of rapid change in national healthcare policy. The implementation of large-scale, multi-site initiatives is becoming an increasingly common approach for addressing problems in healthcare. The summative evaluation research design for the AF4Q initiative, and the lessons learned from its approach, may be valuable to others tasked with evaluating similarly complex community-based initiatives.

Balloon-borne three-meter telescope for far-infrared and submillimeter astronomy

NASA Technical Reports Server (NTRS)

Fazlo, G. G.

1986-01-01

The drawbacks uncovered in the initial gimbal design are reviewed. The behavior of ball bearings are considered and two candidate gimbal designs are proposed which overcome the problems in the initial flex pivot based design.

Habitable exoplanet imaging mission (HabEx): initial flight system design

NASA Astrophysics Data System (ADS)

Alibay, Farah; Kuan, Gary M.; Warfield, Keith R.

2017-09-01

The Habitable Exoplanet Imaging Mission (HabEx) is a concept for a mission to directly image planetary systems around Sun-like stars and to perform general astrophysics investigations being studied as part of a number of mission concepts for the upcoming 2020 Astrophysics Decadal Survey. HabEx would help assess the prevalence of habitable planets in our galaxy, searching in particular for potential biosignatures in the atmospheres of planets in habitable zones. More generally, HabEx would image our neighboring solar systems and characterize the variety of planets that inhabits them. Its direct imaging capability would also enable the mission to study the structure and evolution of debris disks around nearby stars, and their dynamical interaction with planets. Additionally, it will explore a number of more general astrophysics phenomena in our solar system, galaxy, and beyond, in the UV through NIR range. The exoplanet science goals lead to a mission concept with requirements for high contrast imaging and the continuous spectral coverage. The baseline for HabEx is a 4-meter diameter off-axis telescope designed to both search for habitable planets and perform general astrophysics observations, possibly combined with a starshade. In this paper, the initial flight system design for both the telescope and the starshade are presented, focusing on the key and driving requirements and subsystems, as well as the trajectory and station keeping and formation flying technique. Furthermore, some of the initial design trades undergone are described, as well as the key challenges and enablers. Finally, some of the future design and architecture trades to be performed within the flight systems as part of the continuing effort in the HabEx study are discussed.

Worklife Improvement and Leadership Development study: a learning experience in leadership development and "planned" organizational change.

PubMed

Cummings, Greta G; Spiers, Judith A; Sharlow, Janice; Germann, Paula; Yurtseven, Ozden; Bhatti, Aslam

2013-01-01

In response to increasing recognition of the importance of quality health care work environments, the Alberta Cancer Board initiated a province-wide leadership development program to plan for organizational change through a series of stages. In 2004, the Leadership Development Initiative (LDI) was implemented to facilitate organizational learning using a cohort-based leadership intervention based on a communities of practice framework. The aim of the Worklife Improvement and Leadership Development study was to examine both the outcomes and experiences of participants of the LDI program to better understand leadership development, implementation, and its impact on worklife quality among 5 cohorts of health care managers and staff at the Alberta Cancer Board. This study used both structured survey and interview methods, using a pretest-intervention-posttest quasi-experiment without a control group design, to assess the effects of LDI on worklife of leaders and staff. Surveys included the Leadership Practices Inventory and Areas of Worklife Scale, which looked at meaningfulness of work and organizational engagement. Interviews and focus group data provided a more detailed description of the experience of leadership development and perceptions of organizational worklife. The study revealed layers of information about the complexity of individual and collective leadership in a cohort-based design, perceptions of leadership initiatives, organizational worklife, and planned organizational change. Our findings suggest that early changes in how leaders reflected on their own skills and practices (Leading Self) were positive; however, growing disengagement as the LDI continued was evident in the focus group data, particularly when change in behavior of others was not perceived to be evident. To support the effectiveness and success of a leadership initiative, managers and administrators need to implement strategies designed to help leaders grow and cope with ongoing flux of organizational change and stagnation.

The Barriers and Causes of Building Information Modelling Usage for Interior Design Industry

NASA Astrophysics Data System (ADS)

Hamid, A. B. Abd; Taib, M. Z. Mohd; Razak, A. H. N. Abdul; Embi, M. R.

2017-12-01

Building Information Modeling (BIM) has since developed alongside the improvement in the construction industry, purposely to simulate the design, management, construction and documentation. It facilitates and monitors the construction through visualization and emphasizes on various inputs to virtually design and construct a building using specific software. This study aims to identify and elaborate barriers of BIM usage in interior design industry in Malaysia. This study is initiated with a pilot survey utilising sixteen respondents that has been randomly chosen. Respondents are attached with interior design firms that are registered by Lembaga Arkitek Malaysia (LAM). The research findings are expected to provide significant information to encourage BIM adoption among interior design firms.

630A MARITIME NUCLEAR STEAM GENERATOR. Progress Report No. 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1962-07-31

Work on the 630A Maritime Nuclear Steam Generator Scoping Study is summarized. The objective of the program is to establish a specific 630A configuration and to develop specifications for components and test equipment. During the period, work was initiated in critical experiment design and fabrication, additional fuel and materials investigations, boiler-test design and fabrication; blower studies; design of component tests; nuclear, thermodynamic, mechanical and safety analysis, and test facility and equipment studies. Design of the critical experiment mockup and test equipment was completed and fabrication of the parts is approximately 50% complete. A rough draft of the critical experiment hazardsmore » report was completed. A fuel test in the ORR completed 876.5 hr of testing out of a planned 2200-hr test without indication of failure. The burnup was equivalent to about 6000 hr of 630A operation. Damage to the capsule during refueling of the ORR caused termination of the test. The design of an MTR fuel-burnup test was completed and fabrication of the sample initiated. Ni-Cr fuel sheet and cladding stock are being tested for creep and oxidation properties at temperatures up to 1750 deg F and have accumulated times up to 5000 hr; no failures have occurred. These tests are continuing. Specimens of Ni-Cr were fabricated and will be tested to determine the effect of neutron irradiation. Cycle operating conditions with 120O deg F reactor-discharge-air temperature were studied and found to be acceptable for the proposed maritime application. Increases in cycle efficiency above 30.2% appear to be possible and practical. Studies during the period indicate that an acceptable power distribution can be maintained through the life of the reactor and the maximum hot spot temperature and maximum burnup location would not coincide. Specifications for the fuel loading of the critical experiment are being prepared. Study of the pressure vessel resulted in selection of 304 SS. Containment studies indfcated the practicality of designing the shield tank outer shell as part of the containment vessel. A blower scoping study subcontract was completed. The study verified the feasibility of the main and afterblower concept. Alternate shaft-seal designs were proposed. The design of a performance test for the two seal types has been initiated. The design of the boiler test from which control characteristics will be determined was completed and fabrication started. The decision was made that the Low Power Test Facility (LPTF) will be the site used for the critical experiment. A preliminary study of the power test facility requirements were completed. The study indicated that locating the facility adjacent to the LPTF would be operationally and economically feasible. (auth)« less

Microwave monolithic integrated circuit development for future spaceborne phased array antennas

NASA Astrophysics Data System (ADS)

Anzic, G.; Kascak, T. J.; Downey, A. N.; Liu, D. C.; Connolly, D. J.

1983-12-01

The development of fully monolithic gallium arsenide (GaAs) receive and transmit modules suitable for phased array antenna applications in the 30/20 gigahertz bands is presented. Specifications and various design approaches to achieve the design goals are described. Initial design and performance of submodules and associated active and passive components are presented. A tradeoff study summary is presented highlighting the advantages of distributed amplifier approach compared to the conventional single power source designs.

Microwave monolithic integrated circuit development for future spaceborne phased array antennas

NASA Technical Reports Server (NTRS)

Anzic, G.; Kascak, T. J.; Downey, A. N.; Liu, D. C.; Connolly, D. J.

1983-01-01

The development of fully monolithic gallium arsenide (GaAs) receive and transmit modules suitable for phased array antenna applications in the 30/20 gigahertz bands is presented. Specifications and various design approaches to achieve the design goals are described. Initial design and performance of submodules and associated active and passive components are presented. A tradeoff study summary is presented highlighting the advantages of distributed amplifier approach compared to the conventional single power source designs.

Corporate Social Responsibility Initiatives Addressing Social Exclusion in Bangladesh

PubMed Central

2009-01-01

The private sector is often seen as a driver of exclusionary processes rather than a partner in improving the health and welfare of socially-excluded populations. However, private-sector initiatives and partnerships—collectively labelled corporate social responsibility (CSR) initiatives—may be able to positively impact social status, earning potential, and access to services and resources for socially-excluded populations. This paper presents case studies of CSR projects in Bangladesh that are designed to reduce social exclusion among marginalized populations and explores whether CSR initiatives can increase economic and social capabilities to reduce exclusion. The examples provide snapshots of projects that (a) increase job-skills and employment opportunities for women, disabled women, and rehabilitated drug-users and (b) provide healthcare services to female workers and their communities. The CSR case studies cover a limited number of people but characteristics and practices replicable and scaleable across different industries, countries, and populations are identified. Common success factors from the case studies form the basis for recommendations to design and implement more CSR initiatives targeting socially-excluded groups. The analysis found that CSR has potential for positive and lasting impact on developing countries, especifically on socially-excluded populations. However, there is a need for additional monitoring and critical evaluation. PMID:19761088

The Impact of Educational Interventions on Organizational Culture at an Urban Federal Agency. Ph.D. Thesis - Old Dominion Univ.

NASA Technical Reports Server (NTRS)

Mckenzie, Janet Myrick

1994-01-01

This study on the impact of educational interventions on organizational culture is an evaluation of a major educational initiative undertaken by an urban federal agency, namely the National Aeronautics and Space Administration's Langley Research Center (NASA-LaRC). The design of this educational evaluation captures the essence of NASA-LaRC's efforts to continue its distinguished and international stature in the aeronautical research community following the Challenger tragedy. More specifically, this study is an evaluation of the educational initiative designed to ameliorate organizational culture via educational interventions, with emphasis on communications, rewards and recognition, and career development. After completing a review of the related literature, chronicling the educational initiative, interviewing senior managers and employees, and critically examining thousands of free responses on employee perceptions of organizational culture, it is found that previous definitions of organizational culture are more accurately classified as manifestations of organizational culture. This research has endeared to redefine 'organizational culture' by offering a more accurate and diagnostic perspective.

Investigating the Impacts of Design Heuristics on Idea Initiation and Development

ERIC Educational Resources Information Center

Kramer, Julia; Daly, Shanna R.; Yilmaz, Seda; Seifert, Colleen M.; Gonzalez, Richard

2015-01-01

This paper presents an analysis of engineering students' use of Design Heuristics as part of a team project in an undergraduate engineering design course. Design Heuristics are an empirically derived set of cognitive "rules of thumb" for use in concept generation. We investigated heuristic use in the initial concept generation phase,…

Effect of end-point compaction on superpave hot mix asphalt (HMA) mix designs.

DOT National Transportation Integrated Search

2004-01-09

In the Superpave hot mix asphalt (HMA) mix design system, gyratory specime ns are compacted to varying levels of initial (Ninitial), : design (Ndesign) and maximum (Nmaximum) gyrations. Initially, in the Superpave system, specimens were compacted to ...

Acquisition of choice in concurrent chains: Assessing the cumulative decision model.

PubMed

Grace, Randolph C

2016-05-01

Concurrent chains is widely used to study pigeons' choice between terminal links that can vary in delay, magnitude, or probability of reinforcement. We review research on the acquisition of choice in this procedure. Acquisition has been studied with a variety of research designs, and some studies have incorporated no-food trials to allow for timing and choice to be observed concurrently. Results show that: Choice can be acquired rapidly within sessions when terminal links change unpredictably; under steady-state conditions, acquisition depends on both initial- and terminal-link schedules; and initial-link responding is mediated by learning about the terminal-link stimulus-reinforcer relations. The cumulative decision model (CDM) proposed by Christensen and Grace (2010) and Grace and McLean (2006, 2015) provides a good description of within-session acquisition, and correctly predicts the effects of initial and terminal-link schedules in steady-state designs (Grace, 2002a). Questions for future research include how abrupt shifts in preference within individual sessions and temporal control of terminal-link responding can be modeled. Copyright © 2016 Elsevier B.V. All rights reserved.

Risk management for the Space Exploration Initiative

NASA Technical Reports Server (NTRS)

Buchbinder, Ben

1993-01-01

Probabilistic Risk Assessment (PRA) is a quantitative engineering process that provides the analytic structure and decision-making framework for total programmatic risk management. Ideally, it is initiated in the conceptual design phase and used throughout the program life cycle. Although PRA was developed for assessment of safety, reliability, and availability risk, it has far greater application. Throughout the design phase, PRA can guide trade-off studies among system performance, safety, reliability, cost, and schedule. These studies are based on the assessment of the risk of meeting each parameter goal, with full consideration of the uncertainties. Quantitative trade-off studies are essential, but without full identification, propagation, and display of uncertainties, poor decisions may result. PRA also can focus attention on risk drivers in situations where risk is too high. For example, if safety risk is unacceptable, the PRA prioritizes the risk contributors to guide the use of resources for risk mitigation. PRA is used in the Space Exploration Initiative (SEI) Program. To meet the stringent requirements of the SEI mission, within strict budgetary constraints, the PRA structure supports informed and traceable decision-making. This paper briefly describes the SEI PRA process.

Aperture Valve for the Mars Organic Molecule Analyzer (MOMA)

NASA Technical Reports Server (NTRS)

Engler, Charles; Canham, John

2014-01-01

NASA's participation in the multi-nation ExoMars 2018 Rover mission includes a critical astrobiology Mass Spectrometer Instrument on the Rover called the Mars Organic Molecule Analyzer (MOMA). The Aperture Valve is a critical electromechanical valve used by the Mass Spectrometer to facilitate the transfer of ions from Martian soil to the Mass Spectrometer for analysis. The MOMA Aperture Valve development program will be discussed in terms of the initial valve design and subsequent improvements that resulted from prototype testing. The initial Aperture Valve concept seemed promising, based on calculations and perceived merits. However, performance results of this design were disappointing, due to delamination of TiN and DLC coatings applied to the titanium base metals, causing debris from the coatings to seize the valve. While peer reviews and design trade studies are important forums to vet a concept design, results from testing should not be underestimated. Despite the lack of development progress to meet requirements, valuable information from weakness discovered in the initial Valve design was used to develop a second, more robust Aperture Valve. Based on a check-ball design, the ETU / flight valve design resulted in significantly less surface area to create the seal. Moreover, PVD coatings were eliminated in favor of hardened, non-magnetic corrosion resistant alloys. Test results were impressive, with the valve achieving five orders of magnitude better sealing leak rate over end of life requirements. Cycle life was equally impressive, achieving 280,000 cycles without failure.

Aperture Valve for the Mars Organic Molecule Analyzer (MOMA)

NASA Technical Reports Server (NTRS)

Hakun, Claef F.; Engler, Charles D.; Barber, Willie E.; Canham, John S.

2014-01-01

NASA's participation in the multi-nation ExoMars 2018 Rover mission includes a critical astrobiology Mass Spectrometer Instrument on the Rover called the Mars Organic Molecule Analyzer (MOMA). The Aperture Valve is a critical electromechanical valve used by the Mass Spectrometer to facilitate the transfer of ions from Martian soil to the Mass Spectrometer for analysis. The MOMA Aperture Valve development program will be discussed in terms of the Initial valve design and subsequent improvements that resulted from prototype testing. The Initial Aperture Valve concept seemed promising, based on calculations and perceived merits. However, performance results of this design were disappointing, due to delamination of TiN and DLC coatings applied to the Titanium base metals, causing debris from the coatings to seize the valve. While peer reviews and design trade studies are important forums to vet a concept design, results from testing should not be underestimated.Despite the lack of development progress to meet requirements, valuable information from weakness discovered in the Initial Valve design was used to develop a second, more robust Aperture valve. Based on a check-ball design, the ETU flight valve design resulted in significantly less surface area to create the seal. Moreover, PVD coatings were eliminated in favor of hardened, nonmagnetic corrosion resistant alloys. Test results were impressive, with the valve achieving five orders of magnitude better sealing leak rate over end of life requirements. Cycle life was equally impressive, achieving 280,000 cycles without failure.

Aperture Valve for the Mars Organic Molecule Analyzer (MOMA)

NASA Technical Reports Server (NTRS)

Engler, Charles D.; Canham, John S.

2014-01-01

NASA's participation in the multi-nation ExoMars 2018 Rover mission includes a critical astrobiology Mass Spectrometer Instrument on the Rover called the Mars Organic Molecule Analyzer (MOMA). The Aperture Valve is a critical electromechanical valve used by the Mass Spectrometer to facilitate the transfer of ions from Martian soil to the Mass Spectrometer for analysis. The MOMA Aperture Valve development program will be discussed in terms of the Initial valve design and subsequent improvements that resulted from prototype testing. The Initial Aperture Valve concept seemed promising, based on calculations and perceived merits. However, performance results of this design were disappointing, due to delamination of TiN and DLC coatings applied to the Titanium base metals, causing debris from the coatings to seize the valve. While peer reviews and design trade studies are important forums to vet a concept design, results from testing should not be underestimated. Despite the lack of development progress to meet requirements, valuable information from weakness discovered in the Initial Valve design was used to develop a second, more robust Aperture valve. Based on a check-ball design, the ETU /flight valve design resulted in significantly less surface area to create the seal. Moreover, PVD coatings were eliminated in favor of hardened, nonmagnetic corrosion resistant alloys. Test results were impressive, with the valve achieving five orders of magnitude better sealing leak rate over end of life requirements. Cycle life was equally impressive, achieving 280,000 cycles without failure.

Study on the Structures of Two Booster Pellets Having High Initiation Capacity

NASA Astrophysics Data System (ADS)

Shuang-Qi, Hu; Hong-Rong, Liu; Li-shuang, Hu; Xiong, Cao; Xiang-Chao, Mi; Hai-Xia, Zhao

2014-05-01

Insensitive munitions (IM) improve the survivability of both weapons and their associated platforms, which can lead to a reduction in casualties, mission losses, and whole life costs. All weapon systems contain an explosive train that needs to meet IM criteria but reliably initiate a main charge explosive. To ensure that these diametrically opposed requirements can be achieved, new highly effective booster charge structures were designed. The initiation capacity of the two booster pellets was studied using varied composition and axial-steel-dent methods. The results showed that the two new booster pellets can initiate standard main charge pellets with less explosive mass than the ordinary cylindrical booster pellet. The numerical simulation results were in good agreement with the experiment results.

Practical recommendations for the evaluation of improvement initiatives

PubMed Central

Parry, Gareth; Coly, Astou; Goldmann, Don; Rowe, Alexander K; Chattu, Vijay; Logiudice, Deneil; Rabrenovic, Mihajlo; Nambiar, Bejoy

2018-01-01

Abstract A lack of clear guidance for funders, evaluators and improvers on what to include in evaluation proposals can lead to evaluation designs that do not answer the questions stakeholders want to know. These evaluation designs may not match the iterative nature of improvement and may be imposed onto an initiative in a way that is impractical from the perspective of improvers and the communities with whom they work. Consequently, the results of evaluations are often controversial, and attribution remains poorly understood. Improvement initiatives are iterative, adaptive and context-specific. Evaluation approaches and designs must align with these features, specifically in their ability to consider complexity, to evolve as the initiative adapts over time and to understand the interaction with local context. Improvement initiatives often identify broadly defined change concepts and provide tools for care teams to tailor these in more detail to local conditions. Correspondingly, recommendations for evaluation are best provided as broad guidance, to be tailored to the specifics of the initiative. In this paper, we provide practical guidance and recommendations that funders and evaluators can use when developing an evaluation plan for improvement initiatives that seeks to: identify the questions stakeholders want to address; develop the initial program theory of the initiative; identify high-priority areas to measure progress over time; describe the context the initiative will be applied within; and identify experimental or observational designs that will address attribution. PMID:29447410

Sidewalk undermining studies : phase III, field and model studies.

DOT National Transportation Integrated Search

1979-01-01

The results of the early studies of the undermining problems are summarized in the initial portion of this report. Additionally, the design and use of a model sidewalk for testing procedures for preventing undermining are described. Based upon tests ...

Replication and contradiction of highly cited research papers in psychiatry: 10-year follow-up.

PubMed

Tajika, Aran; Ogawa, Yusuke; Takeshima, Nozomi; Hayasaka, Yu; Furukawa, Toshi A

2015-10-01

Contradictions and initial overestimates are not unusual among highly cited studies. However, this issue has not been researched in psychiatry. Aims: To assess how highly cited studies in psychiatry are replicated by subsequent studies. We selected highly cited studies claiming effective psychiatric treatments in the years 2000 through 2002. For each of these studies we searched for subsequent studies with a better-controlled design, or with a similar design but a larger sample. Among 83 articles recommending effective interventions, 40 had not been subject to any attempt at replication, 16 were contradicted, 11 were found to have substantially smaller effects and only 16 were replicated. The standardised mean differences of the initial studies were overestimated by 132%. Studies with a total sample size of 100 or more tended to produce replicable results. Caution is needed when a study with a small sample size reports a large effect. © The Royal College of Psychiatrists 2015.

Mars surface based factory. Phase 2, task 1C: Computer control of a water treatment system to support a space colony on Mars

NASA Technical Reports Server (NTRS)

Fuller, John; Ali, Warsame; Willis, Danette

1989-01-01

In a continued effort to design a surface based factory on Mars for the production of oxygen and water, a preliminary study was made of the surface and atmospheric composition on Mars and determined the mass densities of the various gases in the Martian atmosphere. Based on the initial studies, oxygen and water were determined to be the two products that could be produced economically under the Martian conditions. Studies were also made on present production techniques to obtain water and oxygen. Analyses were made to evaluate the current methods of production that were adaptable to the Martian conditions. Even though the initial effort was the production of oxygen and water, it was found necessary to produce some diluted gases that can be mixed with the oxygen produced to constitute 'breathable' air. The conceptual design of a breathable air manufacturing system, a means of drilling for underground water, and storage of water for future use were completed. The design objective was the conceptual design of an integrated system for the supply of quality water for biological consumption, farming, residential and industrial use.

Nuclear safety for the space exploration initiative

NASA Technical Reports Server (NTRS)

Dix, Terry E.

1991-01-01

The results of a study to identify potential hazards arising from nuclear reactor power systems for use on the lunar and Martian surfaces, related safety issues, and resolutions of such issues by system design changes, operating procedures, and other means are presented. All safety aspects of nuclear reactor power systems from prelaunch ground handling to eventual disposal were examined consistent with the level of detail for SP-100 reactor design at the 1988 System Design Review and for launch vehicle and space transport vehicle designs and mission descriptions as defined in the 90-day Space Exploration Initiative (SEI) study. Information from previous aerospace nuclear safety studies was used where appropriate. Safety requirements for the SP-100 space nuclear reactor system were compiled. Mission profiles were defined with emphasis on activities after low earth orbit insertion. Accident scenarios were then qualitatively defined for each mission phase. Safety issues were identified for all mission phases with the aid of simplified event trees. Safety issue resolution approaches of the SP-100 program were compiled. Resolution approaches for those safety issues not covered by the SP-100 program were identified. Additionally, the resolution approaches of the SP-100 program were examined in light of the moon and Mars missions.

75 FR 7464 - Energy Efficient Building Systems Regional Innovation Cluster Initiative-Joint Federal Funding...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-19

... DEPARTMENT OF ENERGY Energy Efficient Building Systems Regional Innovation Cluster Initiative... Energy Efficient Building Systems Regional Innovation Cluster Initiative. A single proposal submitted by... systems design. The DOE funded Energy Efficient Building Systems Design Hub (the ``Hub'') will serve as a...

Sustaining a Community Computing Infrastructure for Online Teacher Professional Development: A Case Study of Designing Tapped In

NASA Astrophysics Data System (ADS)

Farooq, Umer; Schank, Patricia; Harris, Alexandra; Fusco, Judith; Schlager, Mark

Community computing has recently grown to become a major research area in human-computer interaction. One of the objectives of community computing is to support computer-supported cooperative work among distributed collaborators working toward shared professional goals in online communities of practice. A core issue in designing and developing community computing infrastructures — the underlying sociotechnical layer that supports communitarian activities — is sustainability. Many community computing initiatives fail because the underlying infrastructure does not meet end user requirements; the community is unable to maintain a critical mass of users consistently over time; it generates insufficient social capital to support significant contributions by members of the community; or, as typically happens with funded initiatives, financial and human capital resource become unavailable to further maintain the infrastructure. On the basis of more than 9 years of design experience with Tapped In-an online community of practice for education professionals — we present a case study that discusses four design interventions that have sustained the Tapped In infrastructure and its community to date. These interventions represent broader design strategies for developing online environments for professional communities of practice.

The Psychology School Mental Health Initiative: An Innovative Approach to the Delivery of School-Based Intervention Services

ERIC Educational Resources Information Center

Millar, Golden M.; Lean, Debra; Sweet, Susan D.; Moraes, Sabrina C.; Nelson, Victoria

2013-01-01

Evidence suggests that schools have, by default, become the primary mental health system for students in Canada. The goal of the present study was to design, implement, and evaluate the Psychology School Mental Health Initiative (PSMHI). The PSMHI is an innovative attempt to increase the capacity of school-based psychology staff to deliver…

Levels of Participation of the School Stakeholders to the Different School-Initiated Activities and the Implementation of School-Based Management

ERIC Educational Resources Information Center

Cabardo, Jimmy Rey Opong

2016-01-01

This study aimed to evaluate the levels of participation of the school stakeholders to the different school-initiated activities and the implementation of school-based management (SBM) in selected schools in the Division of Davao del Sur for the school year 2014-2015 using a descriptive-correlational survey research design. A…

A Method for Teacher Inquiry in Cross-Curricular Projects: Lessons from a Case Study

ERIC Educational Resources Information Center

Avramides, Katerina; Hunter, Jade; Oliver, Martin; Luckin, Rosemary

2015-01-01

Many changes in teaching practices (such as introduction of e-assessment) are initiated by school management, or by a lead teacher, but have direct impact on the learning designs of others. However, models of teachers as innovators, conducting evidence-based inquiry into their students' learning, view the teacher as initiator of change in their…

Initial Teacher Training to Promote Health and Well-Being in Schools--A Systematic Review of Effectiveness, Barriers and Facilitators

ERIC Educational Resources Information Center

Shepherd, Jonathan; Pickett, Karen; Dewhirst, Sue; Byrne, Jenny; Speller, Viv; Grace, Marcus; Almond, Palo; Roderick, Paul

2016-01-01

Objectives: To conduct a systematic review of effectiveness, and barriers and facilitators, of initial teacher training to promote health and well-being in schools. Design: Systematic review of the literature. Method: A total of 20 bibliographic databases were searched, including MEDLINE, EMBASE and the Social Science Citation Index. Studies were…

Designing a Feasibility Study: A Starting Point for Considering New Management Initiatives for Working Parents.

ERIC Educational Resources Information Center

Friedman, Dana E.

This brief paper was prepared as a starting point for employers considering the adoption of a new management initiative for working parents. It is not an exhaustive outline of all considerations in the decision-making process, nor does it provide solutions to all the known pitfalls. It does, however, suggest the potential scope and complexity of…

THE FORGETTING OF INSTRUMENT FLYING SKILLS AS A FUNCTION OF THE LEVEL OF INITIAL PROFICIENCY.

ERIC Educational Resources Information Center

MENGELKOCK, ROBERT F.; AND OTHERS

THIS STUDY WAS DESIGNED TO DETERMINE WHETHER INSTRUMENT FLYING SKILLS ARE AFFECTED BY A FOUR-MONTH INTERVAL OF NONFLYING, AND WHETHER THIS EFFECT DIFFERS AS A FUNCTION OF INITIAL FLYING PROFICIENCY. AFTER EQUAL CLASSROOM TRAINING, TWO MATCHED GROUPS OF ROTC STUDENTS, WITHOUT PREVIOUS FLIGHT INSTRUCTION, WERE GIVEN A HIGH AND AN INTERMEDIATE AMOUNT…

Effectiveness of Video Self-Modeling to Promote Social Initiations by 3-Year-Olds with Autism Spectrum Disorders

ERIC Educational Resources Information Center

Buggey, Tom

2012-01-01

Video Self-Modeling (VSM) provides individuals the opportunity to view themselves performing a task beyond their present functioning level through the careful editing of videos. In this study, a single-case multiple-baseline design was used to determine whether VSM would facilitate social initiations across three young children (M = 3 years 10…

Quality Child Care for Infants and Toddlers: Case Studies of Three Community Strategies. Final Report.

ERIC Educational Resources Information Center

Paulsell, Diane; Nogales, Renee; Cohen, Julie

To address the increasing child care needs of low-income families in the wake of welfare reform, federal and state governments have responded with increased funding for child care and for initiatives to improve quality. Some of these initiatives have been designed specifically to address the unique challenges of infant-toddler care. This report…

Ensuring New Zealand's Future Prosperity: A Professional Learning Development Initiative to Bridge the Gap between Theory and Practice

ERIC Educational Resources Information Center

Kennedy, I.; Smith, P.; Sexton, S. S.

2015-01-01

This paper reports on a study investigating the effectiveness of a new professional learning development (PLD) initiative in New Zealand, The Sir Paul Callaghan Science Academy (The Academy). The Academy is designed to provide primary and intermediate (students aged 5 to 13) classroom teachers with the knowledge, materials and support needed for…

Effect of initial planting spacing on wood properties of unthinned loblolly pine at age 21

Treesearch

Alexander III Clark; Lewis Jordan; Laurie Schimleck; Richard F. Daniels

2008-01-01

Young, fast growing, intensively managed plantation loblolly pine (Pinus taeda L.) contains a large proportion of juvenile wood that may not have the stiffness required to meet the design requirements for southern pine dimension lumber. An unthinned loblolly pine spacing study was sampled to determine the effect of initial spacing on wood stiffness,...

Using Tablet PCs and Interactive Software in IC Design Courses to Improve Learning

ERIC Educational Resources Information Center

Simoni, M.

2011-01-01

This paper describes an initial study of using tablet PCs and interactive course software in integrated circuit (IC) design courses. A rapidly growing community is demonstrating how this technology can improve learning and retention of material by facilitating interaction between faculty and students via cognitive exercises during lectures. While…

Remote sensing in Virginia agriculture

NASA Technical Reports Server (NTRS)

Pettry, D. E.; Newhouse, M. E.; Dunton, E. M., Jr.; Scott, J. H., Jr.

1972-01-01

An experimental investigation, designed to develop and evaluate multispectral sensing techniques used in sensing agricultural crops, is described. Initial studies were designed to detect plant species and associated diseases, soil variations, and cultural practices under natural environment conditions. In addition, crop varieties, age, spacing, plant height, percentage of ground cover, and plant vigor are determined.

Alternatives for jet engine control

NASA Technical Reports Server (NTRS)

Sain, M. K.

1983-01-01

The technical progress of researches on alternatives for jet engine control, is reported. The principal new activities involved the initial testing of an input design method for choosing the inputs to a non-linear system to aid the approximation of its tensor parameters, and the beginning of order reduction studies designed to remove unnecessary monomials from tensor models.

Interactive Graphics Simulator: Design, Development, and Effectiveness/Cost Evaluation. Final Report.

ERIC Educational Resources Information Center

Pieper, William J.; And Others

This study was initiated to design, develop, implement, and evaluate a videodisc-based simulator system, the Interactive Graphics Simulator (IGS) for 6883 Converter Flight Control Test Station training at Lowry Air Force Base, Colorado. The simulator provided a means for performing task analysis online, developing simulations from the task…

Learning by Doing: Developing a Baseline Information Literacy Assessment

ERIC Educational Resources Information Center

Kiel, Stephen; Burclaff, Natalie; Johnson, Catherine

2015-01-01

This paper details the design and implementation of an initial baseline assessment of information literacy skills at the University of Baltimore in Maryland. To provide practical advice and experience for a novice audience, the authors discuss how they approached the design and implementation of the study through the use of a rubric-based…

Navigating Past and Present Accountability Measures in Search of an Effective Principal Professional Development Model

ERIC Educational Resources Information Center

Martin, Patrick M.

2012-01-01

This study was designed to investigate the perceived experiences encountered by principals in the state of Illinois regarding professional development sessions offered through the Illinois Administrator Academy. The fundamental value of the Illinois Administrator Academy was designed as one of 169 specific initiatives in association with the…

Energy Design Analysis and Evaluation of a Proposed Air Rescue and Fire Fighting Administration Building for Teterboro Airport

DOE Office of Scientific and Technical Information (OSTI.GOV)

Griffith, B.; Pless, S.; Talbert, B.

2003-07-01

A new/proposed building for the Teterboro Airport was selected as a case study for High Performance Building Initiative research efforts. This report documents research-level energy analysis conducted on the Teterboro Airport building during predesign and design phases of the project.

A Tale of Two Trails: Exploring Different Paths to Success

PubMed Central

Walker, Jennifer G.; Evenson, Kelly R.; Davis, William J.; Bors, Philip; Rodríguez, Daniel A.

2016-01-01

Background This comparative case study investigates 2 successful community trail initiatives, using the Active Living By Design (ALBD) Community Action Model as an analytical framework. The model includes 5 strategies: preparation, promotion, programs, policy, and physical projects. Methods Key stakeholders at 2 sites participated in in-depth interviews (N = 14). Data were analyzed for content using Atlas Ti and grouped according to the 5 strategies. Results Preparation Securing trail resources was challenging, but shared responsibilities facilitated trail development. Promotions The initiatives demonstrated minimal physical activity encouragement strategies. Programs Community stakeholders did not coordinate programmatic opportunities for routine physical activity. Policy Trails’ inclusion in regional greenway master plans contributed to trail funding and development. Policies that were formally institutionalized and enforced led to more consistent trail construction and safer conditions for users. Physical Projects Consistent standards for way finding signage and design safety features enhanced trail usability and safety. Conclusions Communities with different levels of government support contributed unique lessons to inform best practices of trail initiatives. This study revealed a disparity between trail development and use-encouragement strategies, which may limit trails’ impact on physical activity. The ALBD Community Action Model provided a viable framework to structure cross-disciplinary community trail initiatives. PMID:21597125

A preliminary investigation of the potential applicability of the IPAD system to non-aerospace industry

NASA Technical Reports Server (NTRS)

Hulbert, L. E.

1975-01-01

A study of the applicability of the planned Integrated Programs for Aerospace-Vehicle Design (IPAD) system to the design activities of non-aerospace industries was carried out. It was determined that IPAD could be of significant benefit to a number of industries, with the most likely users being the heavy construction and automotive industries. Two additional short studies were initiated to investigate the possible impact of IPAD on a national energy program and on urban and regional planning activities of local and state governments. These initial studies indicated the possibility of significant payoff in these areas and the need for further investigations. It was also determined that utilization of IPAD by non-aerospace industries will probably involve a long stepwise process, since these industries maintain a policy of gradual introduction of new technology.

Design methodology for micro-discrete planar optics with minimum illumination loss for an extended source.

PubMed

Shim, Jongmyeong; Park, Changsu; Lee, Jinhyung; Kang, Shinill

2016-08-08

Recently, studies have examined techniques for modeling the light distribution of light-emitting diodes (LEDs) for various applications owing to their low power consumption, longevity, and light weight. The energy mapping technique, a design method that matches the energy distributions of an LED light source and target area, has been the focus of active research because of its design efficiency and accuracy. However, these studies have not considered the effects of the emitting area of the LED source. Therefore, there are limitations to the design accuracy for small, high-power applications with a short distance between the light source and optical system. A design method for compensating for the light distribution of an extended source after the initial optics design based on a point source was proposed to overcome such limits, but its time-consuming process and limited design accuracy with multiple iterations raised the need for a new design method that considers an extended source in the initial design stage. This study proposed a method for designing discrete planar optics that controls the light distribution and minimizes the optical loss with an extended source and verified the proposed method experimentally. First, the extended source was modeled theoretically, and a design method for discrete planar optics with the optimum groove angle through energy mapping was proposed. To verify the design method, design for the discrete planar optics was achieved for applications in illumination for LED flash. In addition, discrete planar optics for LED illuminance were designed and fabricated to create a uniform illuminance distribution. Optical characterization of these structures showed that the design was optimal; i.e., we plotted the optical losses as a function of the groove angle, and found a clear minimum. Simulations and measurements showed that an efficient optical design was achieved for an extended source.

Initial Multidisciplinary Design and Analysis Framework

NASA Technical Reports Server (NTRS)

Ozoroski, L. P.; Geiselhart, K. A.; Padula, S. L.; Li, W.; Olson, E. D.; Campbell, R. L.; Shields, E. W.; Berton, J. J.; Gray, J. S.; Jones, S. M.;

Neutronic design studies of a conceptual DCLL fusion reactor for a DEMO and a commercial power plant

NASA Astrophysics Data System (ADS)

Palermo, I.; Veredas, G.; Gómez-Ros, J. M.; Sanz, J.; Ibarra, A.

2016-01-01

Neutronic analyses or, more widely, nuclear analyses have been performed for the development of a dual-coolant He/LiPb (DCLL) conceptual design reactor. A detailed three-dimensional (3D) model has been examined and optimized. The design is based on the plasma parameters and functional materials of the power plant conceptual studies (PPCS) model C. The initial radial-build for the detailed model has been determined according to the dimensions established in a previous work on an equivalent simplified homogenized reactor model. For optimization purposes, the initial specifications established over the simplified model have been refined on the detailed 3D design, modifying material and dimension of breeding blanket, shield and vacuum vessel in order to fulfil the priority requirements of a fusion reactor in terms of the fundamental neutronic responses. Tritium breeding ratio, energy multiplication factor, radiation limits in the TF coils, helium production and displacements per atom (dpa) have been calculated in order to demonstrate the functionality and viability of the reactor design in guaranteeing tritium self-sufficiency, power efficiency, plasma confinement, and re-weldability and structural integrity of the components. The paper describes the neutronic design improvements of the DCLL reactor, obtaining results for both DEMO and power plant operational scenarios.

Producer-level benefits of sustainability certification.

PubMed

Blackman, Allen; Rivera, Jorge

2011-12-01

Initiatives certifying that producers of goods and services adhere to defined environmental and social-welfare production standards are increasingly popular. According to proponents, these initiatives create financial incentives for producers to improve their environmental, social, and economic performance. We reviewed the evidence on whether these initiatives have such benefits. We identified peer-reviewed, ex post, producer-level studies in economic sectors in which certification is particularly prevalent (bananas, coffee, fish products, forest products, and tourism operations), classified these studies on the basis of whether their design and methods likely generated credible results, summarized findings from the studies with credible results, and considered how these findings might guide future research. We found 46 relevant studies, most of which focused on coffee and forest products and examined fair-trade and Forest Stewardship Council certification. The methods used in 11 studies likely generated credible results. Of these 11 studies, nine examined the economic effects and two the environmental effects of certification. The results of four of the 11 studies, all of which examined economic effects, showed that certification has producer-level benefits. Hence, the evidence to support the hypothesis that certification benefits the environment or producers is limited. More evidence could be generated by incorporating rigorous, independent evaluation into the design and implementation of projects promoting certification. ©2011 Society for Conservation Biology.

Design and development of FZU-32/B bomb fuze initiator. Final report 23 Jun 72--15 Nov 73

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miazza, J.

1974-05-01

The primary objective of this program was to develop a cost effective, production engineered FZU-24/B Bomb Fuze Initiator. The initiator is an electric generating device which, when installed in the fuze charging well of general purpose bombs, is capable of deriving energy from the airstream passing the bomb in free fall and converting the energy into electric energy suitable for powering a bomb fuze. The objective was to be accomplished by means of a production engineering effort carried through the evolution of design, fabrication, assembly, test, and evaluation. The baseline for the design was Harry Diamond Laboratories' Drawing No. 11716160.more » A quantity of 60 units was fabricated and tested, in accordance with the production engineered design. After some additional redesign to correct identified deficiencies, 220 units were fabricated. These units were subjected to environmental, wind tunnel, and flight testing and performance requirements were met. The final unit design was designated the FZU-32/B Bomb Fuze Initiator.« less

Microwave monolithic integrated circuit development for future spaceborne phased array antennas

NASA Astrophysics Data System (ADS)

Anzic, G.; Kascak, T. J.; Downey, A. N.; Liu, D. C.; Connolly, D. J.

The development of fully monolithic gallium arsenide (GaAs) receive and transmit modules suitable for phased array antenna applications in the 30/20 gigahertz bands is presented. Specifications and various design approaches to achieve the design goals are described. Initial design and performance of submodules and associated active and passive components are presented. A tradeoff study summary is presented, highlighting the advantages of a distributed amplifier approach compared to the conventional single power source designs. Previously announced in STAR as N84-13399

Microwave monolithic integrated circuit development for future spaceborne phased array antennas

NASA Technical Reports Server (NTRS)

Anzic, G.; Kascak, T. J.; Downey, A. N.; Liu, D. C.; Connolly, D. J.

1984-01-01

The development of fully monolithic gallium arsenide (GaAs) receive and transmit modules suitable for phased array antenna applications in the 30/20 gigahertz bands is presented. Specifications and various design approaches to achieve the design goals are described. Initial design and performance of submodules and associated active and passive components are presented. A tradeoff study summary is presented, highlighting the advantages of a distributed amplifier approach compared to the conventional single power source designs. Previously announced in STAR as N84-13399

Multirate Flutter Suppression System Design for the Benchmark Active Controls Technology Wing. Part 2; Methodology Application Software Toolbox

NASA Technical Reports Server (NTRS)

Mason, Gregory S.; Berg, Martin C.; Mukhopadhyay, Vivek

2002-01-01

To study the effectiveness of various control system design methodologies, the NASA Langley Research Center initiated the Benchmark Active Controls Project. In this project, the various methodologies were applied to design a flutter suppression system for the Benchmark Active Controls Technology (BACT) Wing. This report describes the user's manual and software toolbox developed at the University of Washington to design a multirate flutter suppression control law for the BACT wing.

How system designers think: a study of design thinking in human factors engineering.

PubMed

Papantonopoulos, Sotiris

2004-11-01

The paper presents a descriptive study of design thinking in human factors engineering. The objective of the study is to analyse the role of interpretation in design thinking and the role of design practice in guiding interpretation. The study involved 10 system designers undertaking the allocation of cognitive functions in three production planning and control task scenarios. Allocation decisions were recorded and verbal protocols of the design process were collected to elicit the subjects' thought processes. Verbal protocol analysis showed that subjects carried out the design of cognitive task allocation as a problem of applying a selected automation technology from their initial design deliberations. This design strategy stands in contrast to the predominant view of system design that stipulates that user requirements should be thoroughly analysed prior to making any decisions about technology. Theoretical frameworks from design research and ontological design showed that the system design process may be better understood by recognizing the role of design hypotheses in system design, as well as the diverse interactions between interpretation and practice, means and ends, and design practice and the designer's pre-understanding which shape the design process. Ways to balance the bias exerted on the design process were discussed.

The 25 kW power module evolution study. Part 3: Conceptual designs for power module evolutions. Volume 3: Cost estimates

NASA Technical Reports Server (NTRS)

1979-01-01

Cost data generated for the evolutionary power module concepts selected are reported. The initial acquisition costs (design, development, and protoflight unit test costs) were defined and modeled for the baseline 25 kW power module configurations. By building a parametric model of this initial building block, the cost of the 50 kW and the 100 kW power modules were derived by defining only their configuration and programmatic differences from the 25 kW baseline module. Variations in cost for the quantities needed to fulfill the mission scenarios were derived by applying appropriate learning curves.

Design and Formative Evaluation of the Policy Liaison Initiative: A Long-Term Knowledge Translation Strategy to Encourage and Support the Use of Cochrane Systematic Reviews for Informing

ERIC Educational Resources Information Center

Brennan, Sue E.; Cumpston, Miranda; Misso, Marie L.; McDonald, Steve; Murphy, Matthew J.; Green, Sally E.

2016-01-01

The Policy Liaison Initiative (PLI) is a long-term knowledge translation initiative designed to support the use of Cochrane systematic reviews in health policy. A joint initiative between the Australasian Cochrane Centre and Australian Government Department of Health and Ageing, the PLI includes: 1) a community of practice for evidence-informed…

Improving the Reporting Quality of Nonrandomized Evaluations of Behavioral and Public Health Interventions: The TREND Statement

PubMed Central

Des Jarlais, Don C.; Lyles, Cynthia; Crepaz, Nicole

2004-01-01

Developing an evidence base for making public health decisions will require using data from evaluation studies with randomized and nonrandomized designs. Assessing individual studies and using studies in quantitative research syntheses require transparent reporting of the study, with sufficient detail and clarity to readily see differences and similarities among studies in the same area. The Consolidated Standards of Reporting Trials (CONSORT) statement provides guidelines for transparent reporting of randomized clinical trials. We present the initial version of the Transparent Reporting of Evaluations with Nonrandomized Designs (TREND) statement. These guidelines emphasize the reporting of theories used and descriptions of intervention and comparison conditions, research design, and methods of adjusting for possible biases in evaluation studies that use nonrandomized designs. PMID:14998794

Optical systems integrated modeling

NASA Technical Reports Server (NTRS)

Shannon, Robert R.; Laskin, Robert A.; Brewer, SI; Burrows, Chris; Epps, Harlan; Illingworth, Garth; Korsch, Dietrich; Levine, B. Martin; Mahajan, Vini; Rimmer, Chuck

1992-01-01

An integrated modeling capability that provides the tools by which entire optical systems and instruments can be simulated and optimized is a key technology development, applicable to all mission classes, especially astrophysics. Many of the future missions require optical systems that are physically much larger than anything flown before and yet must retain the characteristic sub-micron diffraction limited wavefront accuracy of their smaller precursors. It is no longer feasible to follow the path of 'cut and test' development; the sheer scale of these systems precludes many of the older techniques that rely upon ground evaluation of full size engineering units. The ability to accurately model (by computer) and optimize the entire flight system's integrated structural, thermal, and dynamic characteristics is essential. Two distinct integrated modeling capabilities are required. These are an initial design capability and a detailed design and optimization system. The content of an initial design package is shown. It would be a modular, workstation based code which allows preliminary integrated system analysis and trade studies to be carried out quickly by a single engineer or a small design team. A simple concept for a detailed design and optimization system is shown. This is a linkage of interface architecture that allows efficient interchange of information between existing large specialized optical, control, thermal, and structural design codes. The computing environment would be a network of large mainframe machines and its users would be project level design teams. More advanced concepts for detailed design systems would support interaction between modules and automated optimization of the entire system. Technology assessment and development plans for integrated package for initial design, interface development for detailed optimization, validation, and modeling research are presented.

"EPA'S NATIONAL BEACHES STUDY: HUNTINGTON BEACH, 2003"

EPA Science Inventory

The original U. S. Environmental Protection Agency (EPA) recreational water health studies, initiated in 1972 and completed in 1982, were designed to determine the relationship between swimming-associated gastroenteritis and the quality of the bathing water. However, these healt...

Integrated control-structure design

NASA Technical Reports Server (NTRS)

Hunziker, K. Scott; Kraft, Raymond H.; Bossi, Joseph A.

1991-01-01

A new approach for the design and control of flexible space structures is described. The approach integrates the structure and controller design processes thereby providing extra opportunities for avoiding some of the disastrous effects of control-structures interaction and for discovering new, unexpected avenues of future structural design. A control formulation based on Boyd's implementation of Youla parameterization is employed. Control design parameters are coupled with structural design variables to produce a set of integrated-design variables which are selected through optimization-based methodology. A performance index reflecting spacecraft mission goals and constraints is formulated and optimized with respect to the integrated design variables. Initial studies have been concerned with achieving mission requirements with a lighter, more flexible space structure. Details of the formulation of the integrated-design approach are presented and results are given from a study involving the integrated redesign of a flexible geostationary platform.

Integrated electrokinetics-adsorption remediation of saline-sodic soils: effects of voltage gradient and contaminant concentration on soil electrical conductivity.

PubMed

Essa, Mohammed Hussain; Mu'azu, Nuhu Dalhat; Lukman, Salihu; Bukhari, Alaadin

2013-01-01

In this study, an integrated in situ remediation technique which couples electrokinetics with adsorption, using locally produced granular activated carbon from date palm pits in the treatment zones that are installed directly to bracket the contaminated soils at bench-scale, is investigated. Natural saline-sodic clay soil, spiked with contaminant mixture (kerosene, phenol, Cr, Cd, Cu, Zn, Pb, and Hg), was used in this study to investigate the effects of voltage gradient, initial contaminant concentration, and polarity reversal rate on the soil electrical conductivity. Box-Behnken Design (BBD) was used for the experimental design and response surface methodology (RSM) was employed to model, optimize, and interpret the results obtained using Design-Expert version 8 platform. The total number of experiments conducted was 15 with voltage gradient, polarity reversal rate, and initial contaminant concentration as variables. The main target response discussed in this paper is the soil electrical conductivity due to its importance in electrokinetic remediation process. Responses obtained were fitted to quadratic models whose R (2) ranges from 84.66% to 99.19% with insignificant lack of fit in each case. Among the investigated factors, voltage gradient and initial contaminant concentration were found to be the most significant influential factors.

Space Shuttle Tail Service Mast Concept Verification

NASA Technical Reports Server (NTRS)

Uda, R. T.

1976-01-01

Design studies and analyses were performed to describe the loads and dynamics of the space shuttle tail service masts (TSMs). Of particular interest are the motion and interaction of the umbilical carrier plate, lanyard system, vacuum jacketed hoses, latches, links, and masthead. A development test rig was designed and fabricated to obtain experimental data. The test program is designed to (1) verify the theoretical dynamics calculations, (2) prove the soundness of design concepts, and (3) elucidate problem areas (if any) in the design of mechanisms and structural components. Design, fabrication, and initiation of TSM development testing at Kennedy Space Center are described.

Focusing on the Whole Student: An Evaluation of Massachusetts's Wraparound Zone Initiative

ERIC Educational Resources Information Center

Gandhi, Allison Gruner; Slama, Rachel; Park, So Jung; Russo, Patrick; Winner, Kendra; Bzura, Robin; Jones, Wehmah; Williamson, Sandra

2018-01-01

We used a comparative interrupted time series design to examine the impact of the Massachusetts' Wraparound Zone Initiative on student achievement, attendance, retention, and suspension. This initiative was designed to create coordinated district systems that allow schools to proactively and systematically address students' nonacademic needs. The…

[Design of standard voice sample text for subjective auditory perceptual evaluation of voice disorders].

PubMed

Li, Jin-rang; Sun, Yan-yan; Xu, Wen

2010-09-01

To design a speech voice sample text with all phonemes in Mandarin for subjective auditory perceptual evaluation of voice disorders. The principles for design of a speech voice sample text are: The short text should include the 21 initials and 39 finals, this may cover all the phonemes in Mandarin. Also, the short text should have some meanings. A short text was made out. It had 155 Chinese words, and included 21 initials and 38 finals (the final, ê, was not included because it was rarely used in Mandarin). Also, the text covered 17 light tones and one "Erhua". The constituent ratios of the initials and finals presented in this short text were statistically similar as those in Mandarin according to the method of similarity of the sample and population (r = 0.742, P < 0.001 and r = 0.844, P < 0.001, respectively). The constituent ratios of the tones presented in this short text were statistically not similar as those in Mandarin (r = 0.731, P > 0.05). A speech voice sample text with all phonemes in Mandarin was made out. The constituent ratios of the initials and finals presented in this short text are similar as those in Mandarin. Its value for subjective auditory perceptual evaluation of voice disorders need further study.

Designing for Learner Success (D4LS) at Otago Polytechnic: From an E-learning Designer's Perspective

ERIC Educational Resources Information Center

Gedera, Dilani S. P.

2016-01-01

Otago Polytechnic (OP) is currently redesigning and redeveloping its programmes and courses under an institution-wide initiative called Designing for Learner Success (D4LS). This initiative has several phases--design, development, delivery, and evaluation. This article focuses on the processes and considerations in the development phase of D4LS,…

A Study of Time Constraints Related to Facilities Acquisition in Support of New Weapons Systems Initial Beddowns.

DTIC Science & Technology

1981-09-01

under SPO direction in one of three ways: 1) design definition paper studies, 2) hard- ware prototyping, or 3) some combination of both (17:2...initial tooling and production is accom- plished to bring the system production to the planned peak rate . The second period is concerned with follow-on...pro- duction after the peak rate is achieved (3:5-1). Sometime during this phase, program management 20 responsibility transfer (PMRT) is also

Plasma Discharge Initiation of Explosives in Rock Blasting Application: A Case Study

NASA Astrophysics Data System (ADS)

Jae-Ou, Chae; Young-Jun, Jeong; V, M. Shmelev; A, A. Denicaev; V, M. Poutchkov; V, Ravi

2006-07-01

A plasma discharge initiation system for the explosive volumetric combustion charge was designed, investigated and developed for practical application. Laboratory scale experiments were carried out before conducting the large scale field tests. The resultant explosions gave rise to less noise, insignificant seismic vibrations and good specific explosive consumption for rock blasting. Importantly, the technique was found to be safe and environmentally friendly.

Community Youth Engagement in East Palo Alto: A Study of the Youth Arts and Music Center Initiative

ERIC Educational Resources Information Center

Henderson, Jamila; Biscocho, Francine; Gerstein, Amy

2016-01-01

The Youth Arts and Music Center Initiative is a community-wide effort to design and build an arts center in East Palo Alto. The six-year process, supported by the Goldman Foundation, centered on youth leadership and the arts, and engaged a cross-sector collaborative of partner organizations in an attempt to address the city's shortage of existing…

Development and Initial Validation of a Measure of Autonomy, Competence, and Relatedness in Exercise: The Basic Psychological Needs in Exercise Scale

ERIC Educational Resources Information Center

Vlachopoulos, Symeon P.; Michailidou, Sotiria

2006-01-01

The development process and initial validation of the Basic Psychological Needs in Exercise Scale (BPNES) are presented in this study. The BPNES is a domain-specific self-report instrument designed to assess perceptions of the extent to which the innate needs for autonomy, competence, and relatedness (Deci & Ryan, 2000) are satisfied in…

The Role of Education, Training and Skills Development in Social Inclusion: The University of the Heads of the Valley Case Study

ERIC Educational Resources Information Center

Jones, Paul; Miller, Christopher; Pickernell, David; Packham, Gary

2011-01-01

Purpose: The objective of this paper is to examine the initiation of the University of the Heads of the Valley Initiative (UHOVI) project and evaluate the development of its focus, materials and structure. Design/methodology/approach: The methodology employs interviews with a purposive sample of local employer stakeholders. The rationale for this…

Evaluation Report: Year 2 Implementation of the Small High Schools Initiative Manual Complex, Denver, Colorado

ERIC Educational Resources Information Center

Goldfeder, Elizabeth; Ross, Steven M.

2003-01-01

This report presents the findings of a study conducted by the Center for Research in Educational Policy (CREP) on the second year of implementation of the Small Schools Initiative at the Manual High School Complex. The major goal of this research was to evaluate perceived progress and outcomes at all three high schools. The design and methodology…

WTS-4 system verification unit for wind/hydroelectric integration study

NASA Technical Reports Server (NTRS)

Watts, A. W.

1982-01-01

The Bureau of Reclamation (Reclamation) initiated a study to investigate the concept of integrating 100 MW of wind energy from megawatt-size wind turbines with the Federal hydroelectric system. As a part of the study, one large wind turbine was purchased through the competitive bid process and is now being installed to serve as a system verification unit (SVU). Reclamation negotiated an agreement with NASA to provide technical management of the project for the design, fabrication, installation, testing, and initial operation. Hamilton Standard was awarded a contract to furnish and install its WTS-4 wind turbine rated at 4 MW at a site near Medicine Bow, Wyoming. The purposes for installing the SVU are to fully evaluate the wind/hydro integration concept, make technical evaluation of the hardware design, train personnel in the technology, evaluate operation and maintenance aspects, and evaluate associated environmental impacts. The SVU will be operational in June 1982. Data from the WTS-4 and from a second SVU, Boeing's MOD-2, will be used to prepare a final design for a 100-MW farm if Congress authorizes the project.

Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 7: System/subsystem requirements data book

NASA Technical Reports Server (NTRS)

Hanley, G. M.

1979-01-01

Volume 7 of the Satellite Power Systems (SPS) Concept Definition Study final report summarizes the basic requirements used as a guide to systems analysis and is a basis for the selection of candidate SPS point design(s). Initially, these collected data reflected the level of definition resulting from the evaluation of a broad spectrum of SPS concepts. As the various concepts matured these requirements were updated to reflect the requirements identified for the projected satellite system/subsystem point design(s). The identified subsystem/systems requirements are defined, and where appropriate, recommendations for alternate approaches which may represent improved design features are presented. A more detailed discussion of the selected point design(s) will be found in Volume 2 of this report.

NASA Design Projects at UC Berkeley for NASA's HEDS-UP Program

NASA Astrophysics Data System (ADS)

Kuznetz, Lawrence

1998-01-01

Missions to Mars have been a topic for study since the advent of the space age. But funding has been largely reserved for the unmanned probes such as Viking, Pathfinder and Global Surveyer. Financial and political constraints have relegated human missions, on the other hand, to backroom efforts such as the Space Exploration Initiative (SEI) of 1989-1990. With the new found enthusiasm from Pathfinder and the meteorite ALH84001, however, there is renewed interest in human exploration of Mars. This is manifest in the new Human Exploration and Development of Space (HEDS) program that NASA has recently initiated. This program, through its University Projects (HEDS-UP) office has taken the unusual step of soliciting creative solutions from universities. For its part in the HEDS-UP program, the University of California at Berkeley was asked to study the issues of Habitat design, Space Suits for Mars, Environmental Control and Life Support Systems, Countermeasures to Hypogravity and Crew Size/Mix. These topics were investigated as design projects in "Mars by 2012", an on-going class for undergraduates and graduate students. The methodology of study was deemed to be as important as the design projects themselves and for that we were asked to create an Interactive Design Environment. The Interactive Design Environment (IDE) is an electronic "office" that allows scientists and engineers, as well as other interested parties, to interact with and critique engineering designs as they progress. It usually takes the form of a website that creates a "virtual office" environment. That environment is a place where NASA and others can interact with and critique the university designs for potential inclusion in the Mars Design Reference Mission.

Standardization of a Safing and Arming Device for Artillery Ammunition

DTIC Science & Technology

1976-10-01

designated by other author- ized documents. UNCLASSIFIED SECURITY CLASSIFICATION OF THIS PAGE (When Dala Entered) REPORT DOCUMENTATION PAGE READ...establish the physical and military requirements. Design studies were initiated on the current S&A devices. • DD FOR’* •’*• 1 JAN 73 1473...A developer. In the design of any mechanism, a precise definition of S&A requirements for all fuze applications is required prior to development

Development and Initial Testing of a Measure of Person-Directed Care

ERIC Educational Resources Information Center

White, Diana L.; Newton-Curtis, Linda; Lyons, Karen S.

2008-01-01

Purpose: The purpose of the study was to empirically test items of a new measure designed to assess person-directed care (PDC) practices in long-term care. Design and Methods: After reviewing the literature, we identified five areas related to PDC: personhood, comfort care, autonomy, knowing the person, and support for relationships. We also…

Faculty Perceptions Related to Teaching Online: A Starting Point for Designing Faculty Development Initiatives

ERIC Educational Resources Information Center

Walters, Shelly; Grover, Kenda S.; Turner, Ronna C.; Alexander, Jackson C.

2017-01-01

To design and deliver meaningful professional development programs for faculty who teach online, the unit responsible for these activities should have a clear idea of what content participants might find most beneficial to their practice, as well as what can improve instructor and student satisfaction. Using an online survey, this study explored…

10 CFR 70.39 - Specific licenses for the manufacture or initial transfer of calibration or reference sources.

Code of Federal Regulations, 2011 CFR

2011-01-01

... and design; (iii) Details of the method of incorporation and binding of the plutonium in the source; (iv) Procedures for and results of prototype testing of sources, which are designed to contain more... experimental studies and tests, required by the Commission to facilitate a determination of the safety of the...

Computer-Aided Design Package for Designers of Digital Optical Computers

DTIC Science & Technology

1991-02-01

circuit depth and in circuit breadth. It appears, from initial studies by PhD students Gupta and Majidi using the newly modified tools, that a few irregular...Gupta, which is based on an earlier tool developed by Majidi . The tool allows logic gates to have fan-ins and fan-outs that vary, and allows circuits

Impact of Adult Day Services on Behavioral and Psychological Symptoms of Dementia

ERIC Educational Resources Information Center

Femia, Elia E.; Zarit, Steven H.; Stephens, Mary Ann Parris; Greene, Rick

2007-01-01

Purpose: This study explored whether adult day service (ADS) use was associated with reductions in behavioral and psychological symptoms of dementia (BPSD) in individuals with dementia. Design and Methods: We used a quasi-experimental design to compare a group of 133 persons with dementia (PWDs) who initially enrolled in an ADS program to a…

Three Physical Education Programs' Adaptive Approaches to Change: "How Can I Spin that so It Works for Me?"

ERIC Educational Resources Information Center

Patton, Kevin; Griffin, Linda L.

2008-01-01

This study examined five of 12 physical education teachers participating in the Assessment Initiative for Middle School Physical Education (AIMS-PE), a reform-based teacher development project designed to help teachers examine and reframe their assessment practices and to design and implement curricular programs that encourage active teaching and…

Assessing Impacts of Locally Designed Environmental Education Projects on Students' Environmental Attitudes, Awareness, and Intention to Act

ERIC Educational Resources Information Center

Bergman, Brenda Gail

2016-01-01

This study investigates whether consistent effects on students' environmental attitudes, awareness, and behavioral intentions could be discerned in an initiative that supports environmental education (EE) designed at the classroom level. Students of grades four, five, and seven participated in an assessment at the beginning and end of the school…

Initial Validation of the Prekindergarten Classroom Observation Tool and Goal Setting System for Data-Based Coaching

ERIC Educational Resources Information Center

Crawford, April D.; Zucker, Tricia A.; Williams, Jeffrey M.; Bhavsar, Vibhuti; Landry, Susan H.

2013-01-01

Although coaching is a popular approach for enhancing the quality of Tier 1 instruction, limited research has addressed observational measures specifically designed to focus coaching on evidence-based practices. This study explains the development of the prekindergarten (pre-k) Classroom Observation Tool (COT) designed for use in a data-based…

Engineering Design Processes in Seventh-Grade Classrooms: Bridging the Engineering Education Gap

ERIC Educational Resources Information Center

English, Lyn D.; Hudson, Peter B.; Dawes, Les

2012-01-01

This paper reports on some findings from the first year of a three-year longitudinal study, in which seventh- to ninth-graders were introduced to engineering education. Specifically, the paper addresses students' responses to an initial design activity involving bridge construction, which was implemented at the end of seventh grade. This paper…

Additional Final Area Designations and Technical Amendment for the 2012 Annual Fine Particle Standard Established in 2012 - Mar 2015

EPA Pesticide Factsheets

EPA is establishing or revising initial area designations and a technical amendment to correct an inadvertent error in the initial designation for one area for the 2012 annual national ambient air quality standards for fine particle pollution.

University of Minnesota Duluth Engineering Design Challenge

DTIC Science & Technology

2015-03-23

on overall weight, size, lifting capacity, and ease of transporting. Many initial designs were considered including fire hose lift bags, hydraulic...Many initial designs were considered including fire hose lift bags, hydraulic lifts, a scissor lift, a spring loaded pawl tri-pod, and a pulley lift...26 Fire Hose

49 CFR 178.70 - Approval of UN pressure receptacles.

Code of Federal Regulations, 2012 CFR

2012-10-01

... designee. (b) IIA pre-audit. The manufacturer must submit an application for initial design type approval... of the manufacturer and the IIA certifying the design type, the test results, chemical analyses, lot... initial design type approval. If the pre-audit is found satisfactory by the IIA, the manufacturer will...

49 CFR 178.70 - Approval of UN pressure receptacles.

Code of Federal Regulations, 2011 CFR

2011-10-01

... designee. (b) IIA pre-audit. The manufacturer must submit an application for initial design type approval... of the manufacturer and the IIA certifying the design type, the test results, chemical analyses, lot... initial design type approval. If the pre-audit is found satisfactory by the IIA, the manufacturer will...

49 CFR 178.70 - Approval of UN pressure receptacles.

Code of Federal Regulations, 2014 CFR

2014-10-01

... designee. (b) IIA pre-audit. The manufacturer must submit an application for initial design type approval... of the manufacturer and the IIA certifying the design type, the test results, chemical analyses, lot... initial design type approval. If the pre-audit is found satisfactory by the IIA, the manufacturer will...

49 CFR 178.70 - Approval of UN pressure receptacles.

Code of Federal Regulations, 2013 CFR

2013-10-01

... designee. (b) IIA pre-audit. The manufacturer must submit an application for initial design type approval... of the manufacturer and the IIA certifying the design type, the test results, chemical analyses, lot... initial design type approval. If the pre-audit is found satisfactory by the IIA, the manufacturer will...

Design concepts and cost studies for magnetic suspension and balance systems. [wind tunnel apparatus

NASA Technical Reports Server (NTRS)

Bloom, H. L.

1982-01-01

The application of superconducting magnets for suspension and balance of wind tunnel models was studied. Conceptual designs are presented for magnetic suspension and balance system (MSBS) configurations compatible with three high Reynolds number cases representing specified combinations of test conditions and model sizes. Concepts in general met initially specified performance requirements such as duty cycle, force and moment levels, model angular displacement and positioning accuracy with nominal design requirements for support subsystems. Other performance requirements, such as forced model sinusoidal oscillations, and control force magnitude and frequency, were modified so as to alleviate the magnitude of magnet, power, and cryogenic design requirements.

Space biology initiative program definition review. Trade study 4: Design modularity and commonality

NASA Technical Reports Server (NTRS)

Jackson, L. Neal; Crenshaw, John, Sr.; Davidson, William L.; Herbert, Frank J.; Bilodeau, James W.; Stoval, J. Michael; Sutton, Terry

1989-01-01

The relative cost impacts (up or down) of developing Space Biology hardware using design modularity and commonality is studied. Recommendations for how the hardware development should be accomplished to meet optimum design modularity requirements for Life Science investigation hardware will be provided. In addition, the relative cost impacts of implementing commonality of hardware for all Space Biology hardware are defined. Cost analysis and supporting recommendations for levels of modularity and commonality are presented. A mathematical or statistical cost analysis method with the capability to support development of production design modularity and commonality impacts to parametric cost analysis is provided.

Integrated Technology Rotor/Flight Research Rotor (ITR/FRR) concept definition study

NASA Technical Reports Server (NTRS)

Hughes, C. W.

1983-01-01

Studies were conducted by Hughes Helicopters, Inc. (HHI) for the Applied Technology Laboratory and Aeromechanics Laboratory, U.S. Army Research and Technology Laboratories (AVRADCOM) and the Ames Research Center, National Aeronautics and Space Administration (NASA). Results of predesign studies of advanced main rotor hubs, including bearingless designs, are presented in this report. In addition, the Government's rotor design goals and specifications were reviewed and evaluated. Hub concepts were designed and qualitatively evaluated in order to select the two most promising concepts for further development. Various flexure designs, control systems, and pitchcase designs were investigated during the initial phases of this study. The two designs selected for additional development were designated the V-strap and flat-strap cruciform hubs. These hubs were designed for a four bladed rotor and were sized for 18,400 pounds gross weight with the same diameter (62 feet) and solidity (23 inch chord) as the existing rotor on the Rotor Systems Research Aircraft (RSRA).

Smart roadside initiative : system design document.

DOT National Transportation Integrated Search

2015-09-01

This document describes the software design for the Smart Roadside Initiative (SRI) for the delivery of capabilities related to wireless roadside inspections, electronic screening/virtual weigh stations, universal electronic commercial vehicle identi...

Patient, physician, pharmacy, and pharmacy benefit design factors related to generic medication use.

PubMed

Shrank, William H; Stedman, Margaret; Ettner, Susan L; DeLapp, Dee; Dirstine, June; Brookhart, M Alan; Fischer, Michael A; Avorn, Jerry; Asch, Steven M

2007-09-01

Increased use of generic medications conserves insurer and patient financial resources and may increase patient adherence. The objective of the study is to evaluate whether physician, patient, pharmacy benefit design, or pharmacy characteristics influence the likelihood that patients will use generic drugs Observational analysis of 2001-2003 pharmacy claims from a large health plan in the Western United States. We evaluated claims for 5,399 patients who filled a new prescription in at least 1 of 5 classes of chronic medications with generic alternatives. We identified patients initiated on generic drugs and those started on branded medications who switched to generic drugs in the subsequent year. We used generalized estimating equations to perform separate analyses assessing the relationship between independent variables and the probability that patients were initiated on or switched to generic drugs. Of the 5,399 new prescriptions filled, 1,262 (23.4%) were generics. Of those initiated on branded medications, 606 (14.9%) switched to a generic drug in the same class in the subsequent year. After regression adjustment, patients residing in high-income zip codes were more likely to initiate treatment with a generic than patients in low-income regions (RR = 1.29; 95% C.I. 1.04-1.60); medical subspecialists (RR = 0.82; 0.69-0.95) and obstetrician/gynecologists (RR = 0.81; 0.69-0.98) were less likely than generalist physicians to initiate generics. Pharmacy benefit design and pharmacy type were not associated with initiation of generic medications. However, patients were over 2.5 times more likely to switch from branded to generic medications if they were enrolled in 3-tier pharmacy plans (95% C.I. 1.12-6.09), and patients who used mail-order pharmacies were 60% more likely to switch to a generic (95% C.I. 1.18-2.30) after initiating treatment with a branded drug. Physician and patient factors have an important influence on generic drug initiation, with the patients who live in the poorest zip codes paradoxically receiving generic drugs least often. While tiered pharmacy benefit designs and mail-order pharmacies helped steer patients towards generic medications once the first prescription has been filled, they had little effect on initial prescriptions. Providing patients and physicians with information about generic alternatives may reduce costs and lead to more equitable care.

Initial studies of middle and upper tropospheric stratiform clouds

NASA Technical Reports Server (NTRS)

Cox, S. K.

1982-01-01

The spatial and temporal occurrence of cloud layers, the development of a physical-numerical model to simulate the life cycles of tropospheric cloud layers, and the design of an observational program to study the properties of these layers are described.

Research design considerations for single-dose analgesic clinical trials in acute pain: IMMPACT recommendations.

PubMed

Cooper, Stephen A; Desjardins, Paul J; Turk, Dennis C; Dworkin, Robert H; Katz, Nathaniel P; Kehlet, Henrik; Ballantyne, Jane C; Burke, Laurie B; Carragee, Eugene; Cowan, Penney; Croll, Scott; Dionne, Raymond A; Farrar, John T; Gilron, Ian; Gordon, Debra B; Iyengar, Smriti; Jay, Gary W; Kalso, Eija A; Kerns, Robert D; McDermott, Michael P; Raja, Srinivasa N; Rappaport, Bob A; Rauschkolb, Christine; Royal, Mike A; Segerdahl, Märta; Stauffer, Joseph W; Todd, Knox H; Vanhove, Geertrui F; Wallace, Mark S; West, Christine; White, Richard E; Wu, Christopher

2016-02-01

This article summarizes the results of a meeting convened by the Initiative on Methods, Measurement, and Pain Assessment in Clinical Trials (IMMPACT) on key considerations and best practices governing the design of acute pain clinical trials. We discuss the role of early phase clinical trials, including pharmacokinetic-pharmacodynamic (PK-PD) trials, and the value of including both placebo and active standards of comparison in acute pain trials. This article focuses on single-dose and short-duration trials with emphasis on the perioperative and study design factors that influence assay sensitivity. Recommendations are presented on assessment measures, study designs, and operational factors. Although most of the methodological advances have come from studies of postoperative pain after dental impaction, bunionectomy, and other surgeries, the design considerations discussed are applicable to many other acute pain studies conducted in different settings.

To Explore the Experiences of Women on Reasons in Initiating and Maintaining Breastfeeding in Urban Area of Karachi, Pakistan: An Exploratory Study

PubMed Central

Shaheen Premani, Zahra; Kurji, Zohra; Mithani, Yasmin

2011-01-01

This is an exploratory study that explores the experiences of lactating women in initiating, continuing, or discontinuing breastfeeding in an urban area of Karachi, Pakistan. Objectives. To explore the experiences of lactating women and to understand their support and hindering mechanisms in initiating and maintaining breastfeeding. Methods. This is an exploratory design assisting in exploring the participant's experiences of initiating and maintaining breastfeeding to better understand their world. Purposive sampling was used, and data was analyzed through manual thematic analysis. Results. The data revealed that mother's knowledge, sociocultural environment, breastfeeding decision, and self- and professional support acted as driving forces for the participants. However, sociocultural environment, physiological changes, time management, and being a housewife to breastfeed their children were all challenges and barriers that the participants thought hindered their breastfeeding initiation and maintenance. Conclusion. Breastfeeding is a natural but taxing phenomenon, and breastfeeding mothers experience supporting and hindering factors in initiating and maintaining breastfeeding. PMID:22389780

Effect and interaction study of acetamiprid photodegradation using experimental design.

PubMed

Tassalit, Djilali; Chekir, Nadia; Benhabiles, Ouassila; Mouzaoui, Oussama; Mahidine, Sarah; Merzouk, Nachida Kasbadji; Bentahar, Fatiha; Khalil, Abbas

2016-10-01

The methodology of experimental research was carried out using the MODDE 6.0 software to study the acetamiprid photodegradation depending on the operating parameters, such as the initial concentration of acetamiprid, concentration and type of the used catalyst and the initial pH of the medium. The results showed the importance of the pollutant concentration effect on the acetamiprid degradation rate. On the other hand, the amount and type of the used catalyst have a considerable influence on the elimination kinetics of this pollutant. The degradation of acetamiprid as an environmental pesticide pollutant via UV irradiation in the presence of titanium dioxide was assessed and optimized using response surface methodology with a D-optimal design. The acetamiprid degradation ratio was found to be sensitive to the different studied factors. The maximum value of discoloration under the optimum operating conditions was determined to be 99% after 300 min of UV irradiation.

A novel method for biomaterial scaffold internal architecture design to match bone elastic properties with desired porosity.

PubMed

Lin, Cheng Yu; Kikuchi, Noboru; Hollister, Scott J

2004-05-01

An often-proposed tissue engineering design hypothesis is that the scaffold should provide a biomimetic mechanical environment for initial function and appropriate remodeling of regenerating tissue while concurrently providing sufficient porosity for cell migration and cell/gene delivery. To provide a systematic study of this hypothesis, the ability to precisely design and manufacture biomaterial scaffolds is needed. Traditional methods for scaffold design and fabrication cannot provide the control over scaffold architecture design to achieve specified properties within fixed limits on porosity. The purpose of this paper was to develop a general design optimization scheme for 3D internal scaffold architecture to match desired elastic properties and porosity simultaneously, by introducing the homogenization-based topology optimization algorithm (also known as general layout optimization). With an initial target for bone tissue engineering, we demonstrate that the method can produce highly porous structures that match human trabecular bone anisotropic stiffness using accepted biomaterials. In addition, we show that anisotropic bone stiffness may be matched with scaffolds of widely different porosity. Finally, we also demonstrate that prototypes of the designed structures can be fabricated using solid free-form fabrication (SFF) techniques.

Development of dual-polarization LEKIDs for CMB observations

NASA Astrophysics Data System (ADS)

McCarrick, Heather; Abitbol, Maximilian H.; Ade, Peter A. R.; Barry, Peter; Bryan, Sean; Che, George; Day, Peter; Doyle, Simon; Flanigan, Daniel; Johnson, Bradley R.; Jones, Glenn; LeDuc, Henry G.; Limon, Michele; Mauskopf, Philip; Miller, Amber; Tucker, Carole; Zmuidzinas, Jonas

2016-07-01

We discuss the design considerations and initial measurements from arrays of dual-polarization, lumped-element kinetic inductance detectors (LEKIDs) nominally designed for cosmic microwave background (CMB) studies. The detectors are horn-coupled, and each array element contains two single-polarization LEKIDs, which are made from thin-film aluminum and optimized for a single spectral band centered on 150 GHz. We are developing two array architectures, one based on 160 micron thick silicon wafers and the other based on silicon-on-insulator (SOI) wafers with a 30 micron thick device layer. The 20-element test arrays (40 LEKIDs) are characterized with both a linearly-polarized electronic millimeter wave source and a thermal source. We present initial measurements including the noise spectra, noise-equivalent temperature, and responsivity. We discuss future testing and further design optimizations to be implemented.

Rationale and design of a study using a standardized locally procured macronutrient supplement as adjunctive therapy to HIV treatment in Kenya.

PubMed

Sztam, Kevin A; Ndirangu, Murugi; Sheriff, Muhsin; Arpadi, Stephen M; Hawken, Mark; Rashid, Juma; Deckelbaum, Richard J; El Sadr, Wafaa M

2013-01-01

Poor nutritional status at initiation of antiretroviral therapy (ART) is predictive of mortality. Decreased dietary intake is a major determinant of weight loss in HIV. Despite a biological rationale to treat undernutrition in adults receiving ART, few studies have provided data on feasibility, safety, effectiveness, and sustainability of specific macronutrient supplements with HIV treatment in adults, especially supplements such as a food basket, a supplement approach seldom evaluated in spite of its wide use. We present the rationale and design for a study of a locally procured macronutrient supplement given to HIV-infected patients initiating ART with a body mass index (BMI) ≤20.0 kg/m(2). The objective was to determine feasibility of procurement, distribution, safety and to obtain preliminary effectiveness data for a locally procured supplement. The design was a comparative study for 200 adult participants at two Kenya government-supported clinics. The primary outcome was BMI at 24 weeks. Supplement duration was 24 weeks, total follow-up was 48 weeks, and the study included a comparison site. Novel aspects of this study include use of a standardized macronutrient supplement to protect the participant against household food sharing, and a complementary micronutrient supplement. Comprehensive data collected included dietary intake, HIV-related quality-of-life, food security, neuropsychiatric assessments, laboratory studies, and household geomapping. Assessments were made at baseline, at 24 weeks, and at 48 weeks post-ART initiation. Challenges included establishing a partnership with local millers, distribution from the HIV clinic, food safety, and tracking of participants. These findings will help inform nutrition support programming in Kenya and similar settings, and provide needed data regarding use of macronutrient supplements as an adjunctive intervention with ART.

Using Stakeholder Input to Inform an Innovative Research and Policy Initiative to Improve Depression in Safety Net Communities.

PubMed

Khodyakov, Dmitry; Williams, Pluscedia; Bromley, Elizabeth; Chung, Bowen; Wells, Kenneth

Depression quality improvement programs based on chronic disease management models have been shown to improve depression outcomes. Nonetheless, access to and the use of such programs is limited in minority, under-resourced communities. We report on the outcomes of a Delphi-based consensus exercise conducted by our partnership at a community-wide conference in Los Angeles. Participants identified and prioritized the needs of depressed individuals that should be addressed in a county-wide Health Neighborhood Initiative designed to increase existing mental health, substance use, healthcare, and social services for individuals with low socioeconomic position. Participants agreed that housing is the number one priority. Delphi results also illustrate the importance of addressing social, spiritual, and healthcare access needs of depressed individuals. Our study shows how to systematically engage community-based organizations, patients, families, and community members in the process of improving the design of community-wide health policy initiatives.

Gaseous detonation initiation via wave implosion

NASA Astrophysics Data System (ADS)

Jackson, Scott Irving

Efficient detonation initiation is a topic of intense interest to designers of pulse detonation engines. This experimental work is the first to detonate propane-air mixtures with an imploding detonation wave and to detonate a gas mixture with a non-reflected, imploding shock. In order to do this, a unique device has been developed that is capable of generating an imploding toroidal detonation wave inside of a tube from a single ignition point without any obstruction to the tube flow path. As part of this study, an initiator that creates a large-aspect-ratio planar detonation wave in gas-phase explosive from a single ignition point has also been developed. The effectiveness of our initiation devices has been evaluated. The minimum energy required by the imploding shock for initiation was determined to scale linearly with the induction zone length, indicating the presence of a planar initiation mode. The imploding toroidal detonation initiator was found to be more effective at detonation initiation than the imploding shock initiator, using a comparable energy input to that of current initiator tubes.

Overview of hypersonic CFD code calibration studies

NASA Technical Reports Server (NTRS)

Miller, Charles G.

1987-01-01

The topics are presented in viewgraph form and include the following: definitions of computational fluid dynamics (CFD) code validation; climate in hypersonics and LaRC when first 'designed' CFD code calibration studied was initiated; methodology from the experimentalist's perspective; hypersonic facilities; measurement techniques; and CFD code calibration studies.

Reliability based design including future tests and multiagent approaches

NASA Astrophysics Data System (ADS)

Villanueva, Diane

The initial stages of reliability-based design optimization involve the formulation of objective functions and constraints, and building a model to estimate the reliability of the design with quantified uncertainties. However, even experienced hands often overlook important objective functions and constraints that affect the design. In addition, uncertainty reduction measures, such as tests and redesign, are often not considered in reliability calculations during the initial stages. This research considers two areas that concern the design of engineering systems: 1) the trade-off of the effect of a test and post-test redesign on reliability and cost and 2) the search for multiple candidate designs as insurance against unforeseen faults in some designs. In this research, a methodology was developed to estimate the effect of a single future test and post-test redesign on reliability and cost. The methodology uses assumed distributions of computational and experimental errors with re-design rules to simulate alternative future test and redesign outcomes to form a probabilistic estimate of the reliability and cost for a given design. Further, it was explored how modeling a future test and redesign provides a company an opportunity to balance development costs versus performance by simultaneously designing the design and the post-test redesign rules during the initial design stage. The second area of this research considers the use of dynamic local surrogates, or surrogate-based agents, to locate multiple candidate designs. Surrogate-based global optimization algorithms often require search in multiple candidate regions of design space, expending most of the computation needed to define multiple alternate designs. Thus, focusing on solely locating the best design may be wasteful. We extended adaptive sampling surrogate techniques to locate multiple optima by building local surrogates in sub-regions of the design space to identify optima. The efficiency of this method was studied, and the method was compared to other surrogate-based optimization methods that aim to locate the global optimum using two two-dimensional test functions, a six-dimensional test function, and a five-dimensional engineering example.

Workplace antistigma initiatives: a scoping study.

PubMed

Malachowski, Cindy; Kirsh, Bonnie

2013-07-01

The purpose of this scoping study was to identify and describe the principles and characteristics embedded in workplace mental health antistigma initiatives. Research in this area is diffuse and not well synthesized. Therefore, a scoping study is useful in generating a breadth of coverage and identifying all relevant literature on the topic regardless of study design. Results will inform evaluation strategies and can be used to distinguish the effectiveness of particular elements in future research. The "York Framework," a five-stage methodological design (with an optional sixth stage) was used as the structure for this study. Eleven peer-reviewed and gray-literature databases were searched (2000-2011), and an extensive Internet review was also conducted. Two reviewers independently reviewed all abstracts to determine study selection. A data chart consisting of key issues and themes was utilized to extract data from the included studies. Preliminary results were used to inform a stakeholder consultation with seven international experts. Twenty-two antistigma interventions were included in the study. Most of the initiatives have appeared in the past four years and across geographic boundaries, reflecting the growing international interest in mental health in the workplace. A large proportion of the interventions utilize educational approaches to reducing stigma, and a substantial number target military personnel. Stronger evidence for effective practices needs to be established through the use of standardized workplace-specific interventions, reliable and valid evaluation tools, and overall enhanced scientific rigor.

Advanced Concept Studies for Supersonic Commercial Transports Entering Service in the 2018 to 2020 Period

NASA Technical Reports Server (NTRS)

Morgenstern, John; Norstrud, Nicole; Sokhey, Jack; Martens, Steve; Alonso, Juan J.

2013-01-01

Lockheed Martin Aeronautics Company (LM), working in conjunction with General Electric Global Research (GE GR), Rolls-Royce Liberty Works (RRLW), and Stanford University, herein presents results from the "N+2 Supersonic Validations" contract s initial 22 month phase, addressing the NASA solicitation "Advanced Concept Studies for Supersonic Commercial Transports Entering Service in the 2018 to 2020 Period." This report version adds documentation of an additional three month low boom test task. The key technical objective of this effort was to validate integrated airframe and propulsion technologies and design methodologies. These capabilities aspired to produce a viable supersonic vehicle design with environmental and performance characteristics. Supersonic testing of both airframe and propulsion technologies (including LM3: 97-023 low boom testing and April-June nozzle acoustic testing) verified LM s supersonic low-boom design methodologies and both GE and RRLW's nozzle technologies for future implementation. The N+2 program is aligned with NASA s Supersonic Project and is focused on providing system-level solutions capable of overcoming the environmental and performance/efficiency barriers to practical supersonic flight. NASA proposed "Initial Environmental Targets and Performance Goals for Future Supersonic Civil Aircraft". The LM N+2 studies are built upon LM s prior N+3 100 passenger design studies. The LM N+2 program addresses low boom design and methodology validations with wind tunnel testing, performance and efficiency goals with system level analysis, and low noise validations with two nozzle (GE and RRLW) acoustic tests.

Analysis and Inverse Design of the HSR Arrow Wing Configuration with Fuselage, Wing, and Flow Through Nacelles

NASA Technical Reports Server (NTRS)

Krist, Steven E.; Bauer, Steven X. S.

1999-01-01

The design process for developing the natural flow wing design on the HSR arrow wing configuration utilized several design tools and analysis methods. Initial fuselage/wing designs were generated with inviscid analysis and optimization methods in conjunction with the natural flow wing design philosophy. A number of designs were generated, satisfying different system constraints. Of the three natural flow wing designs developed, the NFWAc2 configuration is the design which satisfies the constraints utilized by McDonnell Douglas Aerospace (MDA) in developing a series of optimized configurations; a wind tunnel model of the MDA designed OPT5 configuration was constructed and tested. The present paper is concerned with the viscous analysis and inverse design of the arrow wing configurations, including the effects of the installed diverters/nacelles. Analyses were conducted with OVERFLOW, a Navier-Stokes flow solver for overset grids. Inverse designs were conducted with OVERDISC, which couples OVERFLOW with the CDISC inverse design method. An initial system of overset grids was generated for the OPT5 configuration with installed diverters/nacelles. An automated regridding process was then developed to use the OPT5 component grids to create grids for the natural flow wing designs. The inverse design process was initiated using the NFWAc2 configuration as a starting point, eventually culminating in the NFWAc4 design-for which a wind tunnel model was constructed. Due to the time constraints on the design effort, initial analyses and designs were conducted with a fairly coarse grid; subsequent analyses have been conducted on a refined system of grids. Comparisons of the computational results to experiment are provided at the end of this paper.

Healthy urban environments for children and young people: A systematic review of intervention studies.

PubMed

Audrey, Suzanne; Batista-Ferrer, Harriet

2015-11-01

This systematic review collates, and presents as a narrative synthesis, evidence from interventions which included changes to the urban environment and reported at least one health behaviour or outcome for children and young people. Following a comprehensive search of six databases, 33 primary studies relating to 27 urban environment interventions were included. The majority of interventions related to active travel. Others included park and playground renovations, road traffic safety, and multi-component community-based initiatives. Public health evidence for effectiveness of such interventions is often weak because study designs tend to be opportunistic, non-randomised, use subjective outcome measures, and do not incorporate follow-up of study participants. However, there is some evidence of potential health benefits to children and young people from urban environment interventions relating to road safety and active travel, with evidence of promise for a multi-component obesity prevention initiative. Future research requires more robust study designs incorporating objective outcome measures. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Apprenticeship, education, and technology: Children as oldtimers and newcomers to the culture of learning through design

NASA Astrophysics Data System (ADS)

Ching, Cynthia Carter

This study deals with the construct of apprenticeship, a well-documented phenomena in anthropological and cultural studies, but which is treated here in unique ways. Whereas most existing work examines apprenticeship among adults in traditional vocational settings, this research is situated among a community of fourth and fifth grade schoolchildren with different levels of previous experience "learning through design" and programming science simulations, thus making them relative oldtimers and newcomers to the culture and practices of design. This work examines teams of children as they create computer simulations, and documents the practices that characterize their apprenticeship to one another. This research also describes how children conceptualize their own roles as newcomers or oldtimers to design. Finally, this study investigates how cognitive benefits realized in an apprenticeship environment are distinctive from that in non-apprenticeship classroom communities, due to the addition of a comparison group of fourth and fifth grade students all engaged in learning through design for the first time. Results reveal that design apprenticeship among schoolchildren shares some crucial characteristics with vocational apprenticeships. Oldtimers initially break down tasks into component parts for newcomers to perform, newcomers move from peripheral to fuller participation in the design process as the project progresses, and tacit pedagogical interactions initiated by oldtimers are intimately tied to the immediate design context on a day-to-day basis. Oldtimers are also more reflective about their interactions with other designers, and they have a more differentiated view of the design process as a whole, than newcomers or comparison first-time designers. The learning benefits realized in an apprenticeship environment are characterized not by a significant difference over the comparison class in the amount of science content or programming code students mastered, but rather in the extent to which students in the apprenticeship classroom are better able to use the context of design to help them represent science knowledge in a systemic manner. The results of this study have implications for broadening the accepted definitions of "apprenticeship" in the literature, curriculum design and implementation of design-based learning, and pedagogy and policy for the technology-infused classroom.

Cell module and fuel conditioner development

NASA Astrophysics Data System (ADS)

Hoover, D. Q., Jr.

1980-01-01

Components for the first 5 cell stack (no cooling plates) of the MK-2 design were fabricated. Preliminary specfications and designs for the components of a 23 cell MK-1 stack with four DIGAS cooling plates were developed. The MK-2 was selected as a bench mark design and a preliminary design of the facilities required for high rate manufacture of fuel cell modules was developed. Two stands for testing 5 cell stacks were built and design work for modifying existing stands and building new stands for 23 and 80 cell stacks was initiated. Design and procurement of components and materials for the catalyst test stand were completed and construction initiated. Work on the specifications of pipeline gas, tap water and recovered water and definition of equipment required for treatment was initiated. An innovative geometry for the reformer was conceived and modifications of the computer program to be used in its design were stated.

Public Interest in Medical Research Participation: Does It Matter if Patients or Community Members Have Helped Design the Study?

PubMed

Cobb, Enesha M; Gebremariam, Achamyeleh; Singer, Dianne; Davis, Matthew M

2015-10-01

We determined national levels of public participation in medical research study design. We compared public interest in medical research participation (MRP) in studies overall, versus studies explicitly designed with public involvement. Cross-sectional household survey of US population in June 2013. Descriptive statistics estimated participation in medical research study design. Chi-square test compared levels of interest in MRP if respondent knew patients or community members helped design the study. Of 2,048 respondents (participation rate 60%), 5% knew someone who had helped design a medical research study. There was no association between having known someone or personal participation in study design and willingness to engage in MRP. Although the overall proportion of respondents who would consider MRP initially (51%) was similar to the proportion who would consider MRP with community member involvement in study design (49%), the changes in respondents' views across the different scenarios were significantly greater than what would have been expected by chance. We found similar levels of interest in MRP whether or not the public is involved in medical research study design. This finding may indicate that public involvement in study design, like community-based participatory research, may not affect overall rates of MRP. © 2015 Wiley Periodicals, Inc.

The reduction of health care costs associated with alcoholism treatment: a 14-year longitudinal study.

PubMed

Holder, H D; Blose, J O

1992-07-01

This study utilized two separate research designs to examine whether the initiation of alcoholism treatment is associated with a change in overall medical care cost in a population of alcoholics enrolled under a health plan sponsored by a large midwestern manufacturing corporation. In the longest longitudinal study of alcoholism treatment costs to date, a review of claims filed from 1974 to 1987 identified 3,729 alcoholics (3,068 of whom received treatment and 661 of whom did not). In one design, a time-series analysis found that following treatment initiation the total health care costs of treated alcoholics--including the cost of alcoholism treatment--declined by 23% to 55% from their highest pretreatment levels. Costs for identified but untreated alcoholics rose following identification. In a second design, analysis of variance was used to control for group differences including pretreatment health status and age. This analysis indicated that the posttreatment costs of treated alcoholics were 24% lower than comparable costs for untreated alcoholics. The study provides considerable evidence that alcoholism treatment can reduce overall medical costs in a heterogeneous alcoholic population (white collar/blue collar; fee-for-service/HMO).

Effect of Understress on Fretting Fatigue Crack Initiation of Press-Fitted Axle

NASA Astrophysics Data System (ADS)

Kubota, Masanobu; Niho, Sotaro; Sakae, Chu; Kondo, Yoshiyuki

Axles are one of the most important components in railway vehicles with regard to safety, since a fail-safe design is not available. The problems of fretting fatigue crack initiation in a press-fitted axle have not been completely solved even though up-to-date fatigue design methods are employed. The objective of the present study is to clarify the effect of understress on fretting fatigue crack initiation behavior in the press-fitted axle. Most of the stress amplitude given to the axle in service is smaller than the fretting fatigue limit based on the stress to initiate cracks under a constant load σwf1. Rotating bending fatigue tests were performed using a 40mm-diameter press-fitted axle assembly. Two-step variable stresses consisting of σwf1 and half or one-third of σwf1 were used in the experiment. Crack initiation life was defined as the number of cycles when a fretting fatigue crack, which is longer than 30µm, was found using a metallurgical microscope. Fretting fatigue cracks were initiated even when the variable stress did not contain the stress above the fretting fatigue crack initiation limit. The crack initiation life varied from 4.0×107 to 1.2×108 depending on the stress frequency ratio nL/nH. The sum of the number of cycles of higher stress at crack initiation NH was much smaller than the number of cycles to initiate cracks estimated from the modified Miner's rule. The value of the modified Miner's damage ranged from 0.013 to 0.185. To clarify the effect of variable amplitude on the fretting fatigue crack initiation, a comprehensive investigation related to relative slip, tangential force and fretting wear is necessary.

Students' Initial Knowledge State and Test Design: Towards a Valid and Reliable Test Instrument

ERIC Educational Resources Information Center

CoPo, Antonio Roland I.

2015-01-01

Designing a good test instrument involves specifications, test construction, validation, try-out, analysis and revision. The initial knowledge state of forty (40) tertiary students enrolled in Business Statistics course was determined and the same test instrument undergoes validation. The designed test instrument did not only reveal the baseline…

A Sino-Finnish Initiative for Experimental Teaching Practices Using the Design Factory Pedagogical Platform

ERIC Educational Resources Information Center

Björklund, Tua A.; Nordström, Katrina M.; Clavert, Maria

2013-01-01

The paper presents a Sino-Finnish teaching initiative, including the design and experiences of a series of pedagogical workshops implemented at the Aalto-Tongji Design Factory (DF), Shanghai, China, and the experimentation plans collected from the 54 attending professors and teachers. The workshops aimed to encourage trying out interdisciplinary…

Materials experiment carrier concepts definition study. Volume 3: Programmatics, part 2

NASA Technical Reports Server (NTRS)

1981-01-01

Project logic, schedule and funding information was derived to enable decisions to be made regarding implementation of MEC system development. A master schedule and cost and price estimates (ROM) were developed for a project that consists of development of an all-up MEC, its integration with payloads and its flight on one 90 day mission. In Part 2 of the study a simple initial MEC was defined to accommodate three MPS baseline payloads. The design of this initial MEC is illustrated. The project logic, detailed schedules, and ROM cost estimate relate to a project in which this initial MEC is developed, integrated with payloads and flown once for 180 days.

Design of monocular head-mounted displays for increased indoor firefighting safety and efficiency

NASA Astrophysics Data System (ADS)

Wilson, Joel; Steingart, Dan; Romero, Russell; Reynolds, Jessica; Mellers, Eric; Redfern, Andrew; Lim, Lloyd; Watts, William; Patton, Colin; Baker, Jessica; Wright, Paul

2005-05-01

Four monocular Head-Mounted Display (HMD) prototypes from the Fire Information and Rescue Equipment (FIRE) project at UC Berkeley are presented. The FIRE project aims to give firefighters a system of information technology tools for safer and more efficient firefighting in large buildings. The paper begins by describing the FIRE project and its use of a custom wireless sensor network (WSN) called SmokeNet for personnel tracking. The project aims to address urban/industrial firefighting procedures in need of improvement. Two "user-needs" studies with the Chicago and Berkeley Fire Departments are briefly presented. The FIRE project"s initial HMD prototype designs are then discussed with regard to feedback from the user-needs studies. These prototypes are evaluated in their potential costs and benefits to firefighters and found to need improvement. Next, some currently available commercial HMDs are reviewed and compared in their cost, performance, and potential for use by firefighters. Feedback from the Berkeley Fire Department user-needs study, in which the initial prototypes were demonstrated, is compiled into a concept selection matrix for the next prototypes. This matrix is used to evaluate a variety of HMDs, including some of the commercial units presented, and to select the best design options. Finally, the current prototypes of the two best design options are presented and discussed.

High temperature molten salt containment

NASA Astrophysics Data System (ADS)

Wang, K. Y.; West, R. E.; Kreith, F.; Lynn, P. P.

1985-05-01

The feasibility of several design options for high-temperature, sensible heat storage containment is examined. The major concerns for a successful containment design include heat loss, corrosive tolerance, structural integrity, and cost. This study is aimed at identifying the most promising high-temperature storage tank among eight designs initially proposed. The study is based on the heat transfer calculations and the structure study of the tank wall and the tank foundation and the overall cost analyses. The results indicate that the single-tank, two-media sloped wall tank has the potential of being lowest in cost. Several relevant technical uncertainties that warrant further research efforts are also identified.

Computer-aided design comparisons of monolithic and hybrid MEM-tunable VCSELs

NASA Astrophysics Data System (ADS)

Ochoa, Edward M.; Nelson, Thomas R., Jr.; Blum-Spahn, Olga; Lott, James A.

2003-07-01

We report and use our micro-electro-mechanically tunable vertical cavity surface emitting laser (MEM-TVCSEL) computer-aided design methodology to investigate the resonant frequency design space for monolithic and hybrid MEM-TVCSELs. For various initial optical air gap thickness, we examine the sensitivity of monolithic or hybrid MEM-TVCSEL resonant frequency by simulating zero, two, and four percent variations in III-V material growth thickness. As expected, as initial optical airgap increases, tuning range decreases due to less coupling between the active region and the tuning mirror. However, each design has different resonant frequency sensitivity to variations in III-V growth parameters. In particular, since the monolithic design is comprised of III-V material, the shift in all growth thicknesses significantly shifts the resonant frequency response. However, for hybrid MEMTVCSELs, less shift results, since the lower reflector is an Au mirror with reflectivity independent of III-V growth variations. Finally, since the hybrid design is comprised of a MUMPS polysilicon mechanical actuator, pull-in voltage remains independent of the initial optical airgap between the tuning reflector and the III-V material. Conversely, as the initial airgap increases in the monolithic design, the pull-in voltage significantly increases.

Making intelligent systems team players: Case studies and design issues. Volume 1: Human-computer interaction design

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Schreckenghost, Debra L.; Woods, David D.; Potter, Scott S.; Johannesen, Leila; Holloway, Matthew; Forbus, Kenneth D.

1991-01-01

Initial results are reported from a multi-year, interdisciplinary effort to provide guidance and assistance for designers of intelligent systems and their user interfaces. The objective is to achieve more effective human-computer interaction (HCI) for systems with real time fault management capabilities. Intelligent fault management systems within the NASA were evaluated for insight into the design of systems with complex HCI. Preliminary results include: (1) a description of real time fault management in aerospace domains; (2) recommendations and examples for improving intelligent systems design and user interface design; (3) identification of issues requiring further research; and (4) recommendations for a development methodology integrating HCI design into intelligent system design.

Initial design of 12S-10P outer-rotor field excitation flux switching motor with different rotor width

NASA Astrophysics Data System (ADS)

Othman, Syed Muhammad Naufal bin Syed; Sulaiman, Erwan bin; Husin, Zhafir Aizat; Khan, Faisal; Mazlan, Mohamed Mubin Aizat

2015-05-01

This paper proposes an initial design of 12 slot, 10 pole outer-rotor field-excitation flux switching motor (FEFSM) with two different rotor width based from 2 different formula to design the rotor width. Hence, initial design include the three coil test to determine the U, W, V-phase, the flux strengthening and weakening, flux at various armature coil and field-excitation coil current, and finally the torque at various JA and JE. As for the materials, the stator and rotor consists of steel sheets made of electromagnetic steels, copper for armature coils and field excitation coils as the only field for magnetic flux source. There will be some design specification and restriction on outer-rotor FEFSM based on 2D-Finite Element Analysis will be applied to design the proposed machine.

The Influence of the National truth campaign on smoking initiation.

PubMed

Farrelly, Matthew C; Nonnemaker, James; Davis, Kevin C; Hussin, Altijani

2009-05-01

States and national organizations spend millions annually on antismoking campaigns aimed at youth. Much of the evidence for their effectiveness is based on cross-sectional studies. This study was designed to evaluate the effectiveness of a prominent national youth smoking-prevention campaign in the U.S. known as truth that was launched in February 2000. A nationally representative cohort of 8904 adolescents aged 12-17 years who were interviewed annually from 1997 to 2004 was analyzed in 2008. A quasi-experimental design was used to relate changes in smoking initiation to variable levels of exposure to antismoking messages over time and across 210 media markets in the U.S. A discrete-time hazard model was used to quantify the influence of media market delivery of TV commercials on smoking initiation, controlling for confounding influences. Based on the results of the hazard model, the number of youth nationally who were prevented from smoking from 2000 through 2004 was estimated. Exposure to the truth campaign is associated with a decreased risk of smoking initiation (relative risk=0.80, p=0.001). Through 2004, approximately 450,000 adolescents were prevented from trying smoking nationwide. Factors negatively associated with initiation include African-American race (relative risk=0.44, p<0.001), Hispanic ethnicity (relative risk=0.74, p<0.001), completing high school (relative risk=0.69, p<0.001), and living with both parents at baseline (OR=0.79, p<0.001). The current study strengthens the available evidence for antismoking campaigns as a viable strategy for preventing youth smoking.

Response surface methodological approach for the decolorization of simulated dye effluent using Aspergillus fumigatus fresenius.

PubMed

Sharma, Praveen; Singh, Lakhvinder; Dilbaghi, Neeraj

2009-01-30

The aim of our research was to study, effect of temperature, pH and initial dye concentration on decolorization of diazo dye Acid Red 151 (AR 151) from simulated dye solution using a fungal isolate Aspergillus fumigatus fresenius have been investigated. The central composite design matrix and response surface methodology (RSM) have been applied to design the experiments to evaluate the interactive effects of three most important operating variables: temperature (25-35 degrees C), pH (4.0-7.0), and initial dye concentration (100-200 mg/L) on the biodegradation of AR 151. The total 20 experiments were conducted in the present study towards the construction of a quadratic model. Very high regression coefficient between the variables and the response (R(2)=0.9934) indicated excellent evaluation of experimental data by second-order polynomial regression model. The RSM indicated that initial dye concentration of 150 mg/L, pH 5.5 and a temperature of 30 degrees C were optimal for maximum % decolorization of AR 151 in simulated dye solution, and 84.8% decolorization of AR 151 was observed at optimum growth conditions.

Design study for a two-color beta measurement system

NASA Technical Reports Server (NTRS)

1982-01-01

Design analysis of the beam splitter combined two color beta system is presented. Conventional and dichroic beam splitters are discussed. Design analysis of the beta system employing two beams with focusing at separate points is presented. Alterations and basic parameters of the two beam system are discussed. Alterations in the focus of the initial laser and the returning beams are also discussed. Heterodyne efficiencies for the on axis and off axis reflected radiation are included.

Space station accommodations for life sciences research facilities: Phase A conceptual design and programmatics studies for Missions SAAX0307, SAAX0302 and the transition from SAAX0307 to SAAX0302. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

1986-01-01

The conceptual designs and programmatics for a Space Station Nonhuman Life Sciences Research Facility (LSRF) are highlighted. Conceptual designs and programmatics encompass an Initial Orbital Capability (IOC) LSRF, a growth or Follow-on Orbital Capability (FOC), and the transitional process required to modify the IOC LSRF to the FOC LSRF.

The Access Vermont Initiative: An Investigation of Team Development in Two Vermont Catchment Areas Providing Services to Children with Severe Emotional Disturbances and Their Families.

ERIC Educational Resources Information Center

Fox, Barbara J.; Wright, Leanne M.

This study was designed to document the processes and dynamics of two multidisciplinary teams under the Access Vermont program, which provides services for children and youth with serious emotional disabilities and their families. In both cases, local interagency teams in the largely rural catchment areas developed plans for an initiative focused…

Study on initiative vibration absorbing technology of optics in strong disturbed environment

NASA Astrophysics Data System (ADS)

Jia, Si-nan; Xiong, Mu-di; Zou, Xiao-jie

2007-12-01

Strong disturbed environment is apt to cause irregular vibration, which seriously affects optical collimation. To improve the performance of laser beam, three-point dynamic vibration absorbing method is proposed, and laser beam initiative vibration absorbing system is designed. The maladjustment signal is detected by position sensitive device (PSD), three groups of PZT are driven to adjust optical element in real-time, so the performance of output-beam is improved. The coupling model of the system is presented. Multivariable adaptive closed-loop decoupling arithmetic is used to design three-input-three-output decoupling controller, so that high precision dynamic adjusting is realized. Experiments indicate that the system has good shock absorbing efficiency.

Design Mining Interacting Wind Turbines.

PubMed

Preen, Richard J; Bull, Larry

2016-01-01

An initial study has recently been presented of surrogate-assisted evolutionary algorithms used to design vertical-axis wind turbines wherein candidate prototypes are evaluated under fan-generated wind conditions after being physically instantiated by a 3D printer. Unlike other approaches, such as computational fluid dynamics simulations, no mathematical formulations were used and no model assumptions were made. This paper extends that work by exploring alternative surrogate modelling and evolutionary techniques. The accuracy of various modelling algorithms used to estimate the fitness of evaluated individuals from the initial experiments is compared. The effect of temporally windowing surrogate model training samples is explored. A surrogate-assisted approach based on an enhanced local search is introduced; and alternative coevolution collaboration schemes are examined.

Low-cost thin-film absorber/evaporator for an absorption chiller. Final report, May 1992-April 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lowenstein, A.; Sibilia, M.

1993-04-01

The feasibility of making the absorber and evaporator of a small lithium-bromide absorption chiller from thin plastic films was studied. Tests were performed to measure (1) pressure limitations for a plastic thin-film heat exchanger, (2) flow pressure-drop characteristics, (3) air permeation rates across the plastic films, and (4) creep characteristics of the plastic films. Initial tests were performed on heat exchangers made of either low-density polyethylene (LDPE), high-density polyethylene (HDPE), or a LDPE/HDPE blend. While initial designs for the heat exchanger failed at internal pressures of only 5 to 6 psi, the final design could withstand pressures of 34 psi.

Initiation Capacity of a Specially Shaped Booster Pellet and Numerical Simulation of Its Initiation Process

NASA Astrophysics Data System (ADS)

Hu, Li-Shuang; Hu, Shuang-Qi; Cao, Xiong; Zhang, Jian-Ren

2014-01-01

The insensitive main charge explosive is creating new requirements for the booster pellet of detonation trains. The traditional cylindrical booster pellet has insufficient energy output to reliably initiate the insensitive main charge explosive. In this research, a concave spherical booster pellet was designed. The initiation capacity of the concave spherical booster pellet was studied using varied composition and axial steel dent methods. The initiation process of the concave spherical booster pellet was also simulated by ANSYS/LS-DYNA. The results showed that using a concave spherical booster allows a 42% reduction in the amount of explosive needed to match the initiation capacity of a conventional cylindrical booster of the same dimensions. With the other parameters kept constant, the initiation capacity of the concave spherical booster pellet increases with decreased cone angle and concave radius. The numerical simulation results are in good agreement with the experimental data.

Advanced space power requirements and techniques. Task 1: Mission projections and requirements. Volume 3: Appendices. [cost estimates and computer programs

NASA Technical Reports Server (NTRS)

Wolfe, M. G.

1978-01-01

Contents: (1) general study guidelines and assumptions; (2) launch vehicle performance and cost assumptions; (3) satellite programs 1959 to 1979; (4) initiative mission and design characteristics; (5) satellite listing; (6) spacecraft design model; (7) spacecraft cost model; (8) mission cost model; and (9) nominal and optimistic budget program cost summaries.

A Single Case Design Evaluation of a Software and Tutor Intervention Addressing Emotion Recognition and Social Interaction in Four Boys with ASD

ERIC Educational Resources Information Center

Lacava, Paul G.; Rankin, Ana; Mahlios, Emily; Cook, Katie; Simpson, Richard L.

2010-01-01

Many students with Autism Spectrum Disorders (ASD) have delays learning to recognize emotions. Social behavior is also challenging, including initiating interactions, responding to others, developing peer relationships, and so forth. In this single case design study we investigated the relationship between use of computer software ("Mind Reading:…

The Challenge of Designing Blended Courses: From Structured Design to Creative Faculty Support!

ERIC Educational Resources Information Center

Carré, Catherine

2015-01-01

This case study deals with the implementation of an e-learning program in a business school in Canada. Cabot Business School decided to offer the program in a blended format so as to increase the flexibility of the program for clientele enrolled in the undergraduate certificate program. A pilot was initiated in 2009 starting with four hybrid…

Investigating the Quality of the School Technology Needs Assessment (STNA) 3.0: A Validity and Reliability Study

ERIC Educational Resources Information Center

Corn, Jenifer O.

2010-01-01

Schools and districts should use a well-designed needs assessment to inform important decisions about a range of technology program areas. Presently, there is a lack of valid and reliable instruments available and accessible to schools to effectively assess their educational needs to better design and evaluate their projects and initiatives. The…

The Influence of a Statewide Green School Initiative on Student Achievement in K-12 Classrooms

ERIC Educational Resources Information Center

Ghent, Cynthia; Trauth-Nare, Amy; Dell, Katie; Haines, Sarah

2014-01-01

This study investigates the influence of Green School designation on students' achievement in state-mandated standardized tests. Data were gathered 3 years pre- and post-Green schools designation, from test pass rates in reading and mathematics for Grade 5 and Grade 8 students, and from mathematics, English language arts, and biology scores for…

Collaborative Business Planning in Initial Vocational Education and Training

ERIC Educational Resources Information Center

Laine, Kati; Hämäläinen, Raija

2015-01-01

There is a growing demand to enhance entrepreneurship. This study aims at producing knowledge that can assist teachers in designing and supporting collaborative learning of entrepreneurship in vocational education. A qualitative case study approach was adopted. The outcome of this study provides a better understanding of the factors that hinder…

Multidisciplinary VA Cardiac Rehabilitation: Preliminary Results and Treatment Efficacy.

ERIC Educational Resources Information Center

Daly, Susan S.; And Others

Initial studies have suggested that a cardiac rehabilitation program (CRP) may improve the physical and psychological functioning of participants. However, these studies have generally addressed a relatively young group of employed adult males. Three studies were designed to target an older, generally retired Veterans Administration population for…

33 CFR 263.17 - Planning, design and construction procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... recommendations. Public notices are not required when a feasibility study is terminated without submittal of a DPR...) WASH DC 20314, depending on the study authority, as provided for in § 263.16(a). (a) Initiation of... sufficient justification for authorizing a feasibility study. Reporting officers are to notify the Division...

33 CFR 263.17 - Planning, design and construction procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... recommendations. Public notices are not required when a feasibility study is terminated without submittal of a DPR...) WASH DC 20314, depending on the study authority, as provided for in § 263.16(a). (a) Initiation of... sufficient justification for authorizing a feasibility study. Reporting officers are to notify the Division...

CIDR

Science.gov Websites

variety of arrays appropriate for a wide breadth of study design needs. Genomic coverage of many of the chromosomal anomalies are services offered at NO ADDITIONAL COST to study investigators with GWAS projects be submitted for both the initial GWAS study as well as replication using our custom SNP service

Focused and Steady-State Characteristics of Shaped Sonic Boom Signatures: Prediction and Analysis

NASA Technical Reports Server (NTRS)

Maglieri, Domenic J.; Bobbitt, Percy J.; Massey, Steven J.; Plotkin, Kenneth J.; Kandil, Osama A.; Zheng, Xudong

2011-01-01

The objective of this study is to examine the effect of flight, at off-design conditions, on the propagated sonic boom pressure signatures of a small "low-boom" supersonic aircraft. The amplification, or focusing, of the low magnitude "shaped" signatures produced by maneuvers such as the accelerations from transonic to supersonic speeds, climbs, turns, pull-up and pushovers is the concern. To analyze these effects, new and/or improved theoretical tools have been developed, in addition to the use of existing methodology. Several shaped signatures are considered in the application of these tools to the study of selected maneuvers and off-design conditions. The results of these applications are reported in this paper as well as the details of the new analytical tools. Finally, the magnitude of the focused boom problem for "low boom" supersonic aircraft designs has been more accurately quantified and potential "mitigations" suggested. In general, "shaped boom" signatures, designed for cruise flight, such as asymmetric and symmetric flat-top and initial-shock ramp waveforms retain their basic shape during transition flight. Complex and asymmetric and symmetric initial shock ramp waveforms provide lower magnitude focus boom levels than N-waves or asymmetric and symmetric flat-top signatures.

The Design of Future Airbreathing Engine Systems within an Intelligent Synthesis Environment

NASA Technical Reports Server (NTRS)

Malone, J. B.; Housner, J. M.; Lytle, J. K.

1999-01-01

This paper describes a new Initiative proposed by the National Aeronautics and Space Administration (NASA). The purpose of this initiative is to develop a future design environment for engineering and science mission synthesis for use by NASA scientists and engineers. This new initiative is called the Intelligent Synthesis Environment (ISE). The paper describes the mission of NASA, future aerospace system characteristics, the current engineering design process, the ISE concept, and concludes with a description of possible ISE applications for the decision of air-breathing propulsion systems.

The Boston Middle School-Corner Store Initiative: Development, Implementation, and Initial Evaluation of a Program Designed to Improve Adolescents' Beverage-Purchasing Behaviors

ERIC Educational Resources Information Center

Hoffman, Jessica A.; Morris, Vivien; Cook, John

2009-01-01

The Boston Middle School Corner Store Initiative (CSI) brought together schools, businesses, and community partners to develop, implement, and evaluate a multicomponent pilot program designed to promote healthier beverage purchasing at corner stores among 3,500 middle school students living in Boston, Massachusetts. Healthy drinks were defined for…

Design and life-cycle considerations for unconventional-reservoir wells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miskimins, J.L.

2009-05-15

This paper provides an overview of design and life-cycle considerations for certain unconventional-reservoir wells. An overview of unconventional-reservoir definitions is provided. Well design and life-cycle considerations are addressed from three aspects: upfront reservoir development, initial well completion, and well-life and long-term considerations. Upfront-reservoir-development issues discussed include well spacing, well orientation, reservoir stress orientations, and tubular metallurgy. Initial-well-completion issues include maximum treatment pressures and rates, treatment diversion, treatment staging, flowback and cleanup, and dewatering needs. Well-life and long-term discussions include liquid loading, corrosion, refracturing and associated fracture reorientation, and the cost of abandonment. These design considerations are evaluated with case studiesmore » for five unconventional-reservoir types: shale gas (Barnett shale), tight gas (Jonah feld), tight oil (Bakken play), coalbed methane (CBM) (San Juan basin), and tight heavy oil (Lost Hills field). In evaluating the life cycle and design of unconventional-reservoir wells, 'one size' does not fit all and valuable knowledge and a shortening of the learning curve can be achieved for new developments by studying similar, more-mature fields.« less

Development of n+-in-p large-area silicon microstrip sensors for very high radiation environments - ATLAS12 design and initial results

NASA Astrophysics Data System (ADS)

Unno, Y.; Edwards, S. O.; Pyatt, S.; Thomas, J. P.; Wilson, J. A.; Kierstead, J.; Lynn, D.; Carter, J. R.; Hommels, L. B. A.; Robinson, D.; Bloch, I.; Gregor, I. M.; Tackmann, K.; Betancourt, C.; Jakobs, K.; Kuehn, S.; Mori, R.; Parzefall, U.; Wiik-Fucks, L.; Clark, A.; Ferrere, D.; Gonzalez Sevilla, S.; Ashby, J.; Blue, A.; Bates, R.; Buttar, C.; Doherty, F.; Eklund, L.; McMullen, T.; McEwan, F.; O`Shea, V.; Kamada, S.; Yamamura, K.; Ikegami, Y.; Nakamura, K.; Takubo, Y.; Nishimura, R.; Takashima, R.; Chilingarov, A.; Fox, H.; Affolder, A. A.; Allport, P. P.; Casse, G.; Dervan, P.; Forshaw, D.; Greenall, A.; Wonsak, S.; Wormald, M.; Cindro, V.; Kramberger, G.; Mandic, I.; Mikuz, M.; Gorelov, I.; Hoeferkamp, M.; Palni, P.; Seidel, S.; Taylor, A.; Toms, K.; Wang, R.; Hessey, N. P.; Valencic, N.; Arai, Y.; Hanagaki, K.; Dolezal, Z.; Kodys, P.; Bohm, J.; Mikestikova, M.; Bevan, A.; Beck, G.; Ely, S.; Fadeyev, V.; Galloway, Z.; Grillo, A. A.; Martinez-McKinney, F.; Ngo, J.; Parker, C.; Sadrozinski, H. F.-W.; Schumacher, D.; Seiden, A.; French, R.; Hodgson, P.; Marin-Reyes, H.; Parker, K.; Paganis, S.; Jinnouchi, O.; Motohashi, K.; Todome, K.; Yamaguchi, D.; Hara, K.; Hagihara, M.; Garcia, C.; Jimenez, J.; Lacasta, C.; Marti i Garcia, S.; Soldevila, U.

2014-11-01

We have been developing a novel radiation-tolerant n+-in-p silicon microstrip sensor for very high radiation environments, aiming for application in the high luminosity large hadron collider. The sensors are fabricated in 6 in., p-type, float-zone wafers, where large-area strip sensor designs are laid out together with a number of miniature sensors. Radiation tolerance has been studied with ATLAS07 sensors and with independent structures. The ATLAS07 design was developed into new ATLAS12 designs. The ATLAS12A large-area sensor is made towards an axial strip sensor and the ATLAS12M towards a stereo strip sensor. New features to the ATLAS12 sensors are two dicing lines: standard edge space of 910 μm and slim edge space of 450 μm, a gated punch-through protection structure, and connection of orphan strips in a triangular corner of stereo strips. We report the design of the ATLAS12 layouts and initial measurements of the leakage current after dicing and the resistivity of the wafers.

GeneratorSE: A Sizing Tool for Variable-Speed Wind Turbine Generators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sethuraman, Latha; Dykes, Katherine L

This report documents a set of analytical models employed by the optimization algorithms within the GeneratorSE framework. The initial values and boundary conditions employed for the generation of the various designs and initial estimates for basic design dimensions, masses, and efficiency for the four different models of generators are presented and compared with empirical data collected from previous studies and some existing commercial turbines. These models include designs applicable for variable-speed, high-torque application featuring direct-drive synchronous generators and low-torque application featuring induction generators. In all of the four models presented, the main focus of optimization is electromagnetic design with themore » exception of permanent-magnet and wire-wound synchronous generators, wherein the structural design is also optimized. Thermal design is accommodated in GeneratorSE as a secondary attribute by limiting the winding current densities to acceptable limits. A preliminary validation of electromagnetic design was carried out by comparing the optimized magnetic loading against those predicted by numerical simulation in FEMM4.2, a finite-element software for analyzing electromagnetic and thermal physics problems for electrical machines. For direct-drive synchronous generators, the analytical models for the structural design are validated by static structural analysis in ANSYS.« less

Improvements in survival of the uncemented Nottingham Total Shoulder prosthesis: a prospective comparative study

PubMed Central

Rosenberg, Nahum; Neumann, Lars; Modi, Amit; Mersich, Istvan J; Wallace, Angus W

2007-01-01

Background The uncemented Nottingham Total Shoulder Replacement prosthesis system (Nottingham TSR) was developed from the previous BioModular® shoulder prosthesis taking into consideration the causes of the initial implant's failure. We investigated the impact of changes in the design of Nottingham TSR prosthesis on its survivorship rate. Methods Survivorship analyses of three types of uncemented total shoulder arthroplasty prostheses (BioModular®, initial Nottingham TSR and current Nottingham TSR systems with 11, 8 and 4 year survivorship data respectively) were compared. All these prostheses were implanted for the treatment of disabling pain in the shoulder due to primary and secondary osteoarthritis or rheumatoid arthritis. Each type of the prosthesis studied was implanted in consecutive group of patients – 90 patients with BioModular® system, 103 with the initial Nottingham TSR and 34 patients with the current Nottingham TSR system. The comparison of the annual cumulative survivorship values in the compatible time range between the three groups was done according to the paired t test. Results The 8-year and 11-year survivorship rates for the initially used modified BioModular® uncemented prosthesis were relatively low (75.6% and 71.7% respectively) comparing to the reported survivorship of the conventional cemented implants. The 8-year survivorship for the uncemented Nottingham TSR prosthesis was significantly higher (81.8%), but still not in the desired range of above 90%, that is found in other cemented designs. Glenoid component loosening was the main factor of prosthesis failure in both prostheses and mainly occurred in the first 4 postoperative years. The 4-year survivorship of the currently re-designed Nottingham TSR prosthesis, with hydroxylapatite coating of the glenoid baseplate, was significantly higher, 93.1% as compared to 85.1% of the previous Nottingham TSR. Conclusion The initial Nottingham shoulder prosthesis showed significantly higher survivorship than the BioModular® uncemented prosthesis, but lower than expected. Subsequently re-designed Nottingham TSR system presented a high short term survivorship rate that encourages its ongoing use PMID:17683577

Factors associated with late ANC initiation among pregnant women in select public health centers of Addis Ababa, Ethiopia: unmatched case-control study design.

PubMed

Gebrekidan, Kahasse; Worku, Alemayehu

2017-01-01

Although Ethiopia has shown remarkable achievements in reducing maternal mortality in the last 10 years, the prevalence of late antenatal care (ANC) initiation is still high in the country. The primary purpose of this study was to identify the factors related to late ANC initiation among pregnant women in selected public health centers in Addis Ababa, Ethiopia. A total of 402 pregnant women (cases=134, controls=268) were recruited using multistage sampling. The design selected for the study was unmatched case-control. EpiData version 3.02 and SPSS version 20.0 were used for data entry and statistical analysis, respectively. Binary logistic regression model was used to model the odds of late ANC initiation. The odds of attending ANC late were significantly higher for mothers with a monthly household income of $8.50 to start the ANC service (AOR=3.04; 95% CI: 1.98, 4.67). Low educational level, low income of the household, unplanned pregnancy, stay for <5 years in Addis Ababa, not getting advice from health extension workers or local TV/radio and higher cost associated with initiation of the first ANC service were the main predictors of late ANC initiation. Therefore, any intervention which would need to improve early ANC initiation should focus on economic empowerment of women, and tailored health education for migrant women should be strengthened.

Factors associated with late ANC initiation among pregnant women in select public health centers of Addis Ababa, Ethiopia: unmatched case–control study design

PubMed Central

Gebrekidan, Kahasse; Worku, Alemayehu

2017-01-01

Background Although Ethiopia has shown remarkable achievements in reducing maternal mortality in the last 10 years, the prevalence of late antenatal care (ANC) initiation is still high in the country. Objective The primary purpose of this study was to identify the factors related to late ANC initiation among pregnant women in selected public health centers in Addis Ababa, Ethiopia. Subjects and methods A total of 402 pregnant women (cases=134, controls=268) were recruited using multistage sampling. The design selected for the study was unmatched case–control. EpiData version 3.02 and SPSS version 20.0 were used for data entry and statistical analysis, respectively. Binary logistic regression model was used to model the odds of late ANC initiation. Results The odds of attending ANC late were significantly higher for mothers with a monthly household income of $8.50 to start the ANC service (AOR=3.04; 95% CI: 1.98, 4.67). Conclusion Low educational level, low income of the household, unplanned pregnancy, stay for <5 years in Addis Ababa, not getting advice from health extension workers or local TV/radio and higher cost associated with initiation of the first ANC service were the main predictors of late ANC initiation. Therefore, any intervention which would need to improve early ANC initiation should focus on economic empowerment of women, and tailored health education for migrant women should be strengthened. PMID:29138615

Space station accommodations for life sciences research facilities. Phase 1: Conceptual design and programmatics studies for Missions SAAX0307, SAAX0302 and the transition from SAAX0307 to SAAX0302. Volume 2: Study results

NASA Technical Reports Server (NTRS)

1986-01-01

Lockheed Missiles and Space Company's conceptual designs and programmatics for a Space Station Nonhuman Life Sciences Research Facility (LSRF) are presented. Conceptual designs and programmatics encompass an Initial Orbital Capability (IOC) LSRF, a growth or follow-on Orbital Capability (FOC), and the transitional process required to modify the IOC LSFR to the FOC LSFR. The IOC and FOC LSFRs correspond to missions SAAX0307 and SAAX0302 of the Space Station Mission Requirements Database, respectively.

The results of a limited study of approaches to the design, fabrication, and testing of a dynamic model of the NASA IOC space station. Executive summary

NASA Technical Reports Server (NTRS)

Brooks, George W.

1985-01-01

The options for the design, construction, and testing of a dynamic model of the space station were evaluated. Since the definition of the space station structure is still evolving, the Initial Operating Capacity (IOC) reference configuration was used as the general guideline. The results of the studies treat: general considerations of the need for and use of a dynamic model; factors which deal with the model design and construction; and a proposed system for supporting the dynamic model in the planned Large Spacecraft Laboratory.

Conceptual design studies for surface infrastructure

NASA Technical Reports Server (NTRS)

Bufkin, Ann L.; Jones, William R., II

1986-01-01

The utimate design of a manned Mars base will be the result of considerable engineering analysis and many trade studies to optimize the configuration. Many options and scenarios are available and all need to be considered at this time. Initial base elements, two base configuration concepts, internal space architectural concerns, and two base set-up scenarios are discussed. There are many variables as well as many unknowns to be reckoned with before people set foot on the red planet.

Best Fed Beginnings: A Nationwide Quality Improvement Initiative to Increase Breastfeeding.

PubMed

Feldman-Winter, Lori; Ustianov, Jennifer; Anastasio, Julius; Butts-Dion, Sue; Heinrich, Patricia; Merewood, Anne; Bugg, Kimarie; Donohue-Rolfe, Sarah; Homer, Charles J

2017-07-01

In response to a low number of Baby-Friendly-designated hospitals in the United States, the Centers for Disease Control and Prevention funded the National Institute for Children's Health Quality to conduct a national quality improvement initiative between 2011 and 2015. The initiative was entitled Best Fed Beginnings and enrolled 90 hospitals in a nationwide initiative to increase breastfeeding and achieve Baby-Friendly designation. The intervention period lasted from July 2012 to August 2014. During that period, data on process indicators aligned with the Ten Steps to Successful Breastfeeding and outcome measures (overall and exclusively related to breastfeeding) were collected. In addition, data on the Baby-Friendly designation were collected after the end of the intervention through April 2016. Hospitals assembled multidisciplinary teams that included parent partners and community representatives. Three in-person learning sessions were interspersed with remote learning and tests of change, and a Web-based platform housed resources and data for widespread sharing. By April 2016, a total of 72 (80%) of the 90 hospitals received the Baby-Friendly designation, nearly doubling the number of designated hospitals in the United States. Participation in the Best Fed Beginnings initiative had significantly high correlation with designation compared with hospital applicants not in the program (Pearson's r [235]: 0.80; P < .01). Overall breastfeeding increased from 79% to 83% ( t = 1.93; P = .057), and exclusive breastfeeding increased from 39% to 61% ( t = 9.72; P < .001). A nationwide initiative of maternity care hospitals accomplished rapid transformative changes to achieve Baby-Friendly designation. These changes were accompanied by a significant increase in exclusive breastfeeding. Copyright © 2017 by the American Academy of Pediatrics.

Dollars and sense: the financial impact of Canadian wellness initiatives†.

PubMed

Wilkin, Christa L; Connelly, Catherine E

2015-09-01

The popular press reports anecdotal benefits of organizational initiatives that are designed to improve employees' work-life balance and wellness, but the long-term impact of these initiatives on firms' financial performance is unknown. Our longitudinal study of publicly traded Canadian organizations uses the strategic human resources management framework to explain why these initiatives may affect their financial performance. We use an exploratory factor analysis of three waves of archival data to identify two types of initiatives and regression to measure their impact on return on assets (ROA). Our findings suggest that, after 2 years, health promotion initiatives significantly decreased ROA, while work-life balance initiatives significantly increased it. Both effects became non-significant over the longer term. © The Author (2013). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Interstellar Initiative Web Page Design

NASA Technical Reports Server (NTRS)

Mehta, Alkesh

1999-01-01

This summer at NASA/MSFC, I have contributed to two projects: Interstellar Initiative Web Page Design and Lenz's Law Relative Motion Demonstration. In the Web Design Project, I worked on an Outline. The Web Design Outline was developed to provide a foundation for a Hierarchy Tree Structure. The Outline would help design a Website information base for future and near-term missions. The Website would give in-depth information on Propulsion Systems and Interstellar Travel. The Lenz's Law Relative Motion Demonstrator is discussed in this volume by Russell Lee.

Development and Initial Results of a Longitudinal Secondary Follow-Up Study.

ERIC Educational Resources Information Center

Levin, Benjamin

1984-01-01

Reviews the literature and difficulties of school follow-up studies. Describes the purpose, design, and methodology of the Peel Secondary Follow-up study. Shows how results from the first round of the study raise important issues about students' expectations and how they are or are not borne out. (SB)

Progressive addition spectacle lenses: Design preferences and head movements while reading

NASA Astrophysics Data System (ADS)

Preston, Julie Lynn

In a subjective preference study, two key progressive addition lens parameters, near zone width and corridor length, were varied in a double-masked, randomized, clinical trial of 49 patients. Each subject received a complete eye examination and a new frame. Each wore 6 pairs of lenses for one week at a time and completed questionnaires relating to vision, adaptation, and satisfaction. The preferred lens was identified from the three near zone width lenses and from the three corridor length lenses. Patient characteristics were analyzed for their effect on design preference. Satisfaction ratings following a brief experience with each design were compared to ratings after one week of wear in order to ascertain the predictability of initial impressions. One lens design appeared twice in the preference trial, providing an assessment of the repeatability of the rating instrument. The lens design with the widest near zone was rated significantly lower than the other near zone width designs for nearly every question relating to vision, adaptation, and satisfaction. This lens was also least preferred of all the designs. Preferences for corridor length were evenly distributed among the three designs. Of patient characteristics, years of progressive addition lens wear and gender significantly affected design preference in this population. Initial impressions were not predictive of satisfaction after a week of wear. The rating instrument was judged to have low repeatability. In the head movement portion of the study, 18 participants from the preference study wore the three near zone width designs while reading three paragraphs of varying print size. From a 20 second recording for each of three different paragraphs with each lens, measures of head rotation and posture were collected. The amplitude of head rotation was significantly affected by print size but not by lens design. The effective zone widths on the lenses scanned by the eyes and the locations of the reading levels were calculated from the head rotation and posture data. Effective zone widths were narrower than the contour plot widths for each condition.

Double Linear Damage Rule for Fatigue Analysis

NASA Technical Reports Server (NTRS)

Halford, G.; Manson, S.

1985-01-01

Double Linear Damage Rule (DLDR) method for use by structural designers to determine fatigue-crack-initiation life when structure subjected to unsteady, variable-amplitude cyclic loadings. Method calculates in advance of service how many loading cycles imposed on structural component before macroscopic crack initiates. Approach eventually used in design of high performance systems and incorporated into design handbooks and codes.

Exploring the initial steps of the testing process: frequency and nature of pre-preanalytic errors.

PubMed

Carraro, Paolo; Zago, Tatiana; Plebani, Mario

2012-03-01

Few data are available on the nature of errors in the so-called pre-preanalytic phase, the initial steps of the testing process. We therefore sought to evaluate pre-preanalytic errors using a study design that enabled us to observe the initial procedures performed in the ward, from the physician's test request to the delivery of specimens in the clinical laboratory. After a 1-week direct observational phase designed to identify the operating procedures followed in 3 clinical wards, we recorded all nonconformities and errors occurring over a 6-month period. Overall, the study considered 8547 test requests, for which 15 917 blood sample tubes were collected and 52 982 tests undertaken. No significant differences in error rates were found between the observational phase and the overall study period, but underfilling of coagulation tubes was found to occur more frequently in the direct observational phase (P = 0.043). In the overall study period, the frequency of errors was found to be particularly high regarding order transmission [29 916 parts per million (ppm)] and hemolysed samples (2537 ppm). The frequency of patient misidentification was 352 ppm, and the most frequent nonconformities were test requests recorded in the diary without the patient's name and failure to check the patient's identity at the time of blood draw. The data collected in our study confirm the relative frequency of pre-preanalytic errors and underline the need to consensually prepare and adopt effective standard operating procedures in the initial steps of laboratory testing and to monitor compliance with these procedures over time.

Using systems thinking to support clinical system transformation.

PubMed

Best, Allan; Berland, Alex; Herbert, Carol; Bitz, Jennifer; van Dijk, Marlies W; Krause, Christina; Cochrane, Douglas; Noel, Kevin; Marsden, Julian; McKeown, Shari; Millar, John

2016-05-16

Purpose - The British Columbia Ministry of Health's Clinical Care Management initiative was used as a case study to better understand large-scale change (LSC) within BC's health system. Using a complex system framework, the purpose of this paper is to examine mechanisms that enable and constrain the implementation of clinical guidelines across various clinical settings. Design/methodology/approach - Researchers applied a general model of complex adaptive systems plus two specific conceptual frameworks (realist evaluation and system dynamics mapping) to define and study enablers and constraints. Focus group sessions and interviews with clinicians, executives, managers and board members were validated through an online survey. Findings - The functional themes for managing large-scale clinical change included: creating a context to prepare clinicians for health system transformation initiatives; promoting shared clinical leadership; strengthening knowledge management, strategic communications and opportunities for networking; and clearing pathways through the complexity of a multilevel, dynamic system. Research limitations/implications - The action research methodology was designed to guide continuing improvement of implementation. A sample of initiatives was selected; it was not intended to compare and contrast facilitators and barriers across all initiatives and regions. Similarly, evaluating the results or process of guideline implementation was outside the scope; the methods were designed to enable conversations at multiple levels - policy, management and practice - about how to improve implementation. The study is best seen as a case study of LSC, offering a possible model for replication by others and a tool to shape further dialogue. Practical implications - Recommended action-oriented strategies included engaging local champions; supporting local adaptation for implementation of clinical guidelines; strengthening local teams to guide implementation; reducing change fatigue; ensuring adequate resources; providing consistent communication especially for front-line care providers; and supporting local teams to demonstrate the clinical value of the guidelines to their colleagues. Originality/value - Bringing a complex systems perspective to clinical guideline implementation resulted in a clear understanding of the challenges involved in LSC.

National Aeronautics and Space Administration (NASA) education 1993--2009

NASA Astrophysics Data System (ADS)

Ivie, Christine M.

The National Aeronautics and Space Administration was established in 1958 and began operating a formal education program in 1993. The purpose of this study was to analyze the education program from 1993 -- 2009 by examining strategic plan documents produced by the NASA education office and interviewing NASA education officials who served during that time period. Constant changes in education leadership at NASA resulted in changes in direction in the education program and the documents produced by each administration reflected both small and some significant changes in program direction. The result of the analysis of documents and interview data was the identification of several trends in the NASA education program. This study identified three significant trends in NASA education. First, the approach that NASA took in both its EPO efforts and in the efforts directed by the Office of Education is disjointed and seems to reflect individual preferences in education approaches designed to reach populations that are of interest to the individuals in decision-making positions rather than reflect a systematic approach designed to meet identified goals and outcomes. Second, this disjointed and person-driven approach led to a lack of consistent evaluation data available for review and planning purposes. Third, there was an ongoing assumption made by the education community that NASA education efforts were tied to larger education reports, concerns, needs, initiatives and evidence collected and presented in Science Technology Engineering and Math (STEM) education-related studies over the past twenty years. In fact, there is no evidence that the programs and projects initiated were a response to these identified needs or initiatives. That does not mean that NASA's efforts did not contribute to STEM education initiatives in the United States. This study, however, indicates that contributions to those initiatives occurred as a byproduct of the effort and not because of specific goals aligned to those initiatives.

Docking simulation analysis of range data requirements for the orbital maneuvering vehicle

NASA Technical Reports Server (NTRS)

Micheal, J. D.; Vinz, F. L.

1985-01-01

The results of an initial study are reported assess the controllability of the Orbital Maneuvering Vehicle (OMV) for terminal closure and docking are reported. The vehicle characteristics used in this study are those of the Marshall Space Flight Center (MSFC) baseline OMV which were published with the request for proposals for preliminary design of this vehicle. This simulation was conducted at MSFC using the Target Motion Simulator. The study focused on the OMV manual mode capability to accommodate both stabilized and tumbling target engagements with varying complements of range and range rate data displayed to the OMV operator. Four trained test subjects performed over 400 simulated orbital dockings during this study. A firm requirement for radar during the terminal closure and dock phase of the OMV mission was not established by these simulations. Fifteen pound thrusters recommended in the MSFC baseline design were found to be advantageous for initial rate matching maneuvers with unstabilized targets; however, lower thrust levels were desirable for making the final docking maneuvers.

How cigarette design can affect youth initiation into smoking: Camel cigarettes 1983-93

PubMed Central

Wayne, G; Connolly, G

2002-01-01

Objective: To determine changes in the design of Camel cigarettes in the period surrounding the "Smooth Character" advertising campaign and to assess the impact of these changes on youth smoking. Data sources: Internal documents made available through the document website maintained by RJ Reynolds, manufacturer of Camel cigarettes. Study selection: Electronic searches using keywords to identify relevant data. Data extraction: A web based index search of documents targeting "smoothness" or "harshness" and "younger adult smokers" ("YAS") or "first usual brand younger adult smokers" ("FUBYAS") in the 10 year period surrounding the introduction of the "Smooth Character" campaign was used to identify Camel related product design research projects. A snowball methodology was used: initial documents were identified by focusing on key words, codes, researchers, committees, meetings, and gaps in overall chronology; a second set of documents was culled from these initial documents, and so on. Data synthesis: Product design research led to the introduction of redesigned Camel cigarettes targeted to younger adult males coinciding with the "Smooth Character" campaign. Further refinements in Camel cigarettes during the following five year period continued to emphasise the smoothness of the cigarette, utilising additives and blends which reduced throat irritation but increased or retained nicotine impact. Conclusions: Industry competition for market share among younger adult smokers may have contributed to the reversal of a decline in youth smoking rates during the late 1980s through development of products which were more appealing to youth smokers and which aided in initiation by reducing harshness and irritation. PMID:11893812

Ergonomics for the inclusion of older workers in the knowledge workforce and a guidance tool for designers.

PubMed

Gonzalez, I; Morer, P

2016-03-01

The ageing of the population and the inverted population pyramid is bringing important changes to society as a whole. These changes are associated with the inclusion of an older workforce in knowledge work and the challenge they represent in adapting the work environment accordingly. In order to approach a more universal design of the work environment, industrial designers need support from user-sensitive inclusive design studies. While there are plenty of guidelines and tools containing relevant information, there is a need to develop more appropriate tools for Industrial Designers that cover the initial phase of the design process. This study provides a review of the available tools and guidelines and proposes a theoretical framework intended for developing a design guidance tool for inclusive workstation design. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Design of capability measurement instruments pedagogic content knowledge (PCK) for prospective mathematics teachers

NASA Astrophysics Data System (ADS)

Aminah, N.; Wahyuni, I.

2018-05-01

The purpose of this study is to find out how the process of designing a tool of measurement Pedagogical Content Knowledge (PCK) capabilities, especially for prospective mathematics teachers are valid and practical. The design study of this measurement appliance uses modified Plomp development step, which consists of (1) initial assessment stage, (2) design stage at this stage, the researcher designs the measuring grille of PCK capability, (3) realization stage that is making measurement tool ability of PCK, (4) test phase, evaluation, and revision that is testing validation of measurement tools conducted by experts. Based on the results obtained that the design of PCK capability measurement tool is valid as indicated by the assessment of expert validator, and the design of PCK capability measurement tool, shown based on the assessment of teachers and lecturers as users of states strongly agree the design of PCK measurement tools can be used.

Nanohole Arrays of Mixed Designs and Microwriting for Simultaneous and Multiple Protein Binding Studies

PubMed Central

Ji, Jin; Yang, Jiun-Chan; Larson, Dale N.

2009-01-01

We demonstrate using nanohole arrays of mixed designs and a microwriting process based on dip-pen nanolithography to monitor multiple, different protein binding events simultaneously in real time based on the intensity of Extraordinary Optical Transmission of nanohole arrays. The microwriting process and small footprint of the individual nanohole arrays enabled us to observe different binding events located only 16μm apart, achieving high spatial resolution. We also present a novel concept that incorporates nanohole arrays of different designs to improve confidence and accuracy of binding studies. For proof of concept, two types of nanohole arrays, designed to exhibit opposite responses to protein bindings, were fabricated on one transducer. Initial studies indicate that the mixed designs could help to screen out artifacts such as protein intrinsic signals, providing improved accuracy of binding interpretation. PMID:19297143

Evaluation of high temperature superconductive thermal bridges for space-borne cryogenic infrared detectors

NASA Technical Reports Server (NTRS)

Scott, Elaine P.

1993-01-01

The focus of this research is on the reduction of the refrigeration requirements for infrared sensors operating in space through the use of high temperature superconductive (HTS) materials as electronic leads between the cooled sensors and the relatively warmer data acquisition components. Specifically, this initial study was directed towards the design of an experiment to quantify the thermal performance of these materials in the space environment. First, an intensive review of relevant literature was undertaken, and then, design requirements were formulated. From this background information, a preliminary experimental design was developed. Additional studies will involve a thermal analysis of the experiment and further modifications of the experimental design.

Toward a transdisciplinary approach of ergonomic design for sustainability.

PubMed

Di Bucchianico, Giuseppe; Marano, Antonio; Rossi, Emilio

2012-01-01

Starting from the results of a theoretical and methodological study on Ergonomic design for sustainability previously developed from the authors, this paper shows the early results of a study that tries to apply them to actual operational and conceptual apparatuses of Ergonomics. In particular, the research aims to verify the possibility for Ergonomics to initiate an update of its current theoretical and procedural tools, towards new design solutions of "sustainable well-being", trying to look for new declinations of its several fields of application. The paper identifies new paradigms and definitions for one of the central themes of ergonomic design, as well as one among the most established and investigated: the usability of products and services.

From the past to the future: Integrating work experience into the design process.

PubMed

Bittencourt, João Marcos; Duarte, Francisco; Béguin, Pascal

2017-01-01

Integrating work activity issues into design process is a broadly discussed theme in ergonomics. Participation is presented as the main means for such integration. However, a late participation can limit the development of both project solutions and future work activity. This article presents the concept of construction of experience aiming at the articulated development of future activities and project solutions. It is a non-teleological approach where the initial concepts will be transformed by the experience built up throughout the design process. The method applied was a case study of an ergonomic participation during the design of a new laboratory complex for biotechnology research. Data was obtained through analysis of records in a simulation process using a Lego scale model and interviews with project participants. The simulation process allowed for developing new ways of working and generating changes in the initial design solutions, which enable workers to adopt their own developed strategies for conducting work more safely and efficiently in the future work system. Each project decision either opens or closes a window of opportunities for developing a future activity. Construction of experience in a non-teleological design process allows for understanding the consequences of project solutions for future work.

Antimicrobial design of titanium surface that kill sessile bacteria but support stem cells adhesion

NASA Astrophysics Data System (ADS)

Zhu, Chen; Bao, Ni-Rong; Chen, Shuo; Zhao, Jian-Ning

2016-12-01

Implant-related bacterial infection is one of the most severe postoperative complications in orthopedic or dental surgery. In this context, from the perspective of surface modification, increasing efforts have been made to enhance the antibacterial capability of titanium surface. In this work, a hierarchical hybrid surface architecture was firstly constructed on titanium surface by two-step strategy of acid etching and H2O2 aging. Then silver nanoparticles were firmly immobilized on the hierarchical surface by ion implantation, showing no detectable release of silver ions from surface. The designed titanium surface showed good bioactivity. More importantly, this elaborately designed titanium surface can effectively inactivate the adherent S. aureus on surface by virtue of a contact-killing mode. Meanwhile, the designed titanium surface can significantly facilitate the initial adhesion and spreading behaviors of bone marrow mesenchymal stem cells (MSCs) on titanium. The results suggested that, the elaborately designed titanium surface might own a cell-favoring ability that can help mammalian cells win the initial adhesion race against bacteria. We hope the present study can provide a new insight for the better understanding and designing of antimicrobial titanium surface, and pave the way to satisfying clinical requirements.

Simplified, inverse, ejector design tool

NASA Technical Reports Server (NTRS)

Dechant, Lawrence J.

1993-01-01

A simple lumped parameter based inverse design tool has been developed which provides flow path geometry and entrainment estimates subject to operational, acoustic, and design constraints. These constraints are manifested through specification of primary mass flow rate or ejector thrust, fully-mixed exit velocity, and static pressure matching. Fundamentally, integral forms of the conservation equations coupled with the specified design constraints are combined to yield an easily invertible linear system in terms of the flow path cross-sectional areas. Entrainment is computed by back substitution. Initial comparison with experimental and analogous one-dimensional methods show good agreement. Thus, this simple inverse design code provides an analytically based, preliminary design tool with direct application to High Speed Civil Transport (HSCT) design studies.

Geometric modeling for computer aided design

NASA Technical Reports Server (NTRS)

Schwing, James L.

1992-01-01

The goal was the design and implementation of software to be used in the conceptual design of aerospace vehicles. Several packages and design studies were completed, including two software tools currently used in the conceptual level design of aerospace vehicles. These tools are the Solid Modeling Aerospace Research Tool (SMART) and the Environment for Software Integration and Execution (EASIE). SMART provides conceptual designers with a rapid prototyping capability and additionally provides initial mass property analysis. EASIE provides a set of interactive utilities that simplify the task of building and executing computer aided design systems consisting of diverse, stand alone analysis codes that result in the streamlining of the exchange of data between programs, reducing errors and improving efficiency.

Multirate Flutter Suppression System Design for the Benchmark Active Controls Technology Wing. Part 1; Theory and Design Procedure

NASA Technical Reports Server (NTRS)

Mason, Gregory S.; Berg, Martin C.; Mukhopadhyay, Vivek

2002-01-01

To study the effectiveness of various control system design methodologies, the NASA Langley Research Center initiated the Benchmark Active Controls Project. In this project, the various methodologies were applied to design a flutter suppression system for the Benchmark Active Controls Technology (BACT) Wing. This report describes a project at the University of Washington to design a multirate suppression system for the BACT wing. The objective of the project was two fold. First, to develop a methodology for designing robust multirate compensators, and second, to demonstrate the methodology by applying it to the design of a multirate flutter suppression system for the BACT wing.

Criminal Behavior and Repeat Violent Trauma: A Case-Control Study.

PubMed

Nanney, John T; Conrad, Erich J; McCloskey, Michael; Constans, Joseph I

2015-09-01

Repeat violent injury is common among young urban men and is increasingly a focus of trauma center-based injury prevention efforts. Though understanding risk factors for repeat violent injury may be critical in designing such interventions, this knowledge is limited. This study aims to determine which criminal behaviors, both before and after the initial trauma, predict repeat violent trauma. Gun, violent, and drug crimes are expected to increase risk of subsequent violent injury among victims of violence. A case-control design examined trauma registry and publicly available criminal data for all male patients aged <40 years presenting for violent trauma between April 2006 and December 2011 (N=1,142) to the sole Level 1 trauma center in a city with high rates of violence. Logistic regression was used to determine criminal behaviors predictive of repeat violent injury. Data were obtained and analyzed between January 2013 and June 2014. Regarding crimes committed before the first injury, only drug crime (OR=5.32) predicted repeat violent trauma. With respect to crimes committed after the initial injury, illegal gun possession (OR=2.70) predicted repeat victimization. Initiating gun (OR=3.53) or drug crime (OR=5.12) was associated with increased risk. Prior drug involvement may identify young male victims of violence as at high risk of repeat violent injury. Gun carrying and initiating drug involvement after the initial injury may increase risk of repeat injury and may be important targets for interventions aimed at preventing repeat violent trauma. Published by Elsevier Inc.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robb, Kevin R.; Jain, Prashant K.; Hazelwood, Thomas J.

Fluoride salt cooled high-temperature reactor (FHR) concepts include pumps for forced circulation of the primary and secondary coolants. As part of a cooperative research and development agreement between the Shanghai Institute of Applied Physics and the Oak Ridge National Laboratory (ORNL), a research project was initiated to aid in the development of pumps for high-temperature salts. The objectives of the task included characterization of the behavior of an existing ORNL LSTL pump; design and test a modified impeller and volute for improved pump characteristics; and finally, provide lessons learned, recommendations, and guidelines for salt pump development and design. The pumpmore » included on the liquid salt test loop (LSTL) at ORNL served as a case study. This report summarizes the progress to date. The report is organized as follows. First, there is a review, focused on pumps, of the significant amount of work on salts at ORNL during the 1950s 1970s. The existing pump on the LSTL is then described. Plans for hot and cold testing of the pump are then discussed, including the design for a cold shakedown test stand and the required LSTL modifications for hot testing. Initial hydraulic and vibration modeling of the LSTL pump is documented. Later, test data from the LSTL will be used to validate the modeling approaches, which could then be used for future pump design efforts. Some initial insights and test data from the pump are then provided. Finally, some preliminary design goals and requirements for a future LSTL pump are provided as examples of salt pump design considerations.« less

Inhibitory activity of bacteriocin produced from Lactobacillus SCG 1223 toward L. monocytogenes, S. thypimurium and E. coli

NASA Astrophysics Data System (ADS)

Marwati, T.; Cahyaningrum, N.; Widodo, S.; Januarsyah, T.; Purwoko

2018-01-01

Bacteriocin is a protein compound which has bactericidal ability against pathogen bacteria. This research aims to study the inhibitory activity of bacteriocin produced from Lactobacillus SCG 1223 against Listeria monocytogenes, Salmonella thypimuruim and Escherchia coli. The bacteriocin produce from Lactobacillus SCG 1223 in the MRS broth media The experimental design used was Completely Randomized Design. The variations used in this design were percentage of inoculum (5%, 10%), medium pH (4, 6), incubation temperature (27°C, 40°C), and incubation time (4, 10, 14 hours). Result showed that bacteriocin from Lactobacillus SCG 1223 had wide spectrum toward L. monocytogenes, S. thypimuruim and E. coli. The highest bacteriocin activity toward L. monocytogenes produced by Lactobacillus SCG 1223 with 10% inoculum in media with initial pH 6, incubation temperature 27°C for 14 hour, toward S. thypimurium produced by Lactobacillus SCG 1223 with in media with initial pH 6, incubation temperature 40°C for 14 hour, and toward E. coli was 1085.81 AU/ml, produced by Lactobacillus SCG 1223 in MRS broth with initial pH 4, incubation temperature 40°C for 14 hour. This study is expected to find a new food preservative that can inhibit the growth of pathogenic bacteria and extend the shelf life of food. From the economic prospective of view, bacteriocin is very promising natural alternative biopreservatives.

Interspecific competition in plants: how well do current methods answer fundamental questions?

PubMed

Connolly, J; Wayne, P; Bazzaz, F A

2001-02-01

Accurately quantifying and interpreting the processes and outcomes of competition among plants is essential for evaluating theories of plant community organization and evolution. We argue that many current experimental approaches to quantifying competitive interactions introduce size bias, which may significantly impact the quantitative and qualitative conclusions drawn from studies. Size bias generally arises when estimates of competitive ability are erroneously influenced by the initial size of competing individuals. We employ a series of quantitative thought experiments to demonstrate the potential for size bias in analysis of four traditional experimental designs (pairwise, replacement series, additive series, and response surfaces) either when only final measurements are available or when both initial and final measurements are collected. We distinguish three questions relevant to describing competitive interactions: Which species dominates? Which species gains? and How do species affect each other? The choice of experimental design and measurements greatly influences the scope of inference permitted. Conditions under which the latter two questions can give biased information are tabulated. We outline a new approach to characterizing competition that avoids size bias and that improves the concordance between research question and experimental design. The implications of the choice of size metrics used to quantify both the initial state and the responses of elements in interspecific mixtures are discussed. The relevance of size bias in competition studies with organisms other than plants is also discussed.

Conceptual Launch Vehicle and Spacecraft Design for Risk Assessment

NASA Technical Reports Server (NTRS)

Motiwala, Samira A.; Mathias, Donovan L.; Mattenberger, Christopher J.

2014-01-01

One of the most challenging aspects of developing human space launch and exploration systems is minimizing and mitigating the many potential risk factors to ensure the safest possible design while also meeting the required cost, weight, and performance criteria. In order to accomplish this, effective risk analyses and trade studies are needed to identify key risk drivers, dependencies, and sensitivities as the design evolves. The Engineering Risk Assessment (ERA) team at NASA Ames Research Center (ARC) develops advanced risk analysis approaches, models, and tools to provide such meaningful risk and reliability data throughout vehicle development. The goal of the project presented in this memorandum is to design a generic launch 7 vehicle and spacecraft architecture that can be used to develop and demonstrate these new risk analysis techniques without relying on other proprietary or sensitive vehicle designs. To accomplish this, initial spacecraft and launch vehicle (LV) designs were established using historical sizing relationships for a mission delivering four crewmembers and equipment to the International Space Station (ISS). Mass-estimating relationships (MERs) were used to size the crew capsule and launch vehicle, and a combination of optimization techniques and iterative design processes were employed to determine a possible two-stage-to-orbit (TSTO) launch trajectory into a 350-kilometer orbit. Primary subsystems were also designed for the crewed capsule architecture, based on a 24-hour on-orbit mission with a 7-day contingency. Safety analysis was also performed to identify major risks to crew survivability and assess the system's overall reliability. These procedures and analyses validate that the architecture's basic design and performance are reasonable to be used for risk trade studies. While the vehicle designs presented are not intended to represent a viable architecture, they will provide a valuable initial platform for developing and demonstrating innovative risk assessment capabilities.

Application of digital computer APU modeling techniques to control system design.

NASA Technical Reports Server (NTRS)

Bailey, D. A.; Burriss, W. L.

1973-01-01

Study of the required controls for a H2-O2 auxiliary power unit (APU) technology program for the Space Shuttle. A steady-state system digital computer program was prepared and used to optimize initial system design. Analytical models of each system component were included. The program was used to solve a nineteen-dimensional problem, and then time-dependent differential equations were added to the computer program to simulate transient APU system and control. Some system parameters were considered quasi-steady-state, and others were treated as differential variables. The dynamic control analysis proceeded from initial ideal control modeling (which considered one control function and assumed the others to be ideal), stepwise through the system (adding control functions), until all of the control functions and their interactions were considered. In this way, the adequacy of the final control design over the required wide range of APU operating conditions was established.

Descent Assisted Split Habitat Lunar Lander Concept

NASA Technical Reports Server (NTRS)

Mazanek, Daniel D.; Goodliff, Kandyce; Cornelius, David M.

2008-01-01

The Descent Assisted Split Habitat (DASH) lunar lander concept utilizes a disposable braking stage for descent and a minimally sized pressurized volume for crew transport to and from the lunar surface. The lander can also be configured to perform autonomous cargo missions. Although a braking-stage approach represents a significantly different operational concept compared with a traditional two-stage lander, the DASH lander offers many important benefits. These benefits include improved crew egress/ingress and large-cargo unloading; excellent surface visibility during landing; elimination of the need for deep-throttling descent engines; potentially reduced plume-surface interactions and lower vertical touchdown velocity; and reduced lander gross mass through efficient mass staging and volume segmentation. This paper documents the conceptual study on various aspects of the design, including development of sortie and outpost lander configurations and a mission concept of operations; the initial descent trajectory design; the initial spacecraft sizing estimates and subsystem design; and the identification of technology needs

Introducing WISDEM:An Integrated System Modeling for Wind Turbines and Plant (Presentation)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dykes, K.; Graf, P.; Scott, G.

2015-01-01

The National Wind Technology Center wind energy systems engineering initiative has developed an analysis platform to leverage its research capabilities toward integrating wind energy engineering and cost models across wind plants. This Wind-Plant Integrated System Design & Engineering Model (WISDEM) platform captures the important interactions between various subsystems to achieve a better National Wind Technology Center wind energy systems engineering initiative has developed an analysis platform to leverage its research capabilities toward integrating wind energy engineering and cost models across wind plants. This Wind-Plant Integrated System Design & Engineering Model (WISDEM) platform captures the important interactions between various subsystems tomore » achieve a better understanding of how to improve system-level performance and achieve system-level cost reductions. This work illustrates a few case studies with WISDEM that focus on the design and analysis of wind turbines and plants at different system levels.« less

The incident user design in comparative effectiveness research.

PubMed

Johnson, Eric S; Bartman, Barbara A; Briesacher, Becky A; Fleming, Neil S; Gerhard, Tobias; Kornegay, Cynthia J; Nourjah, Parivash; Sauer, Brian; Schumock, Glen T; Sedrakyan, Art; Stürmer, Til; West, Suzanne L; Schneeweiss, Sebastian

2013-01-01

Comparative effectiveness research includes cohort studies and registries of interventions. When investigators design such studies, how important is it to follow patients from the day they initiated treatment with the study interventions? Our article considers this question and related issues to start a dialogue on the value of the incident user design in comparative effectiveness research. By incident user design, we mean a study that sets the cohort's inception date according to patients' new use of an intervention. In contrast, most epidemiologic studies enroll patients who were currently or recently using an intervention when follow-up began. We take the incident user design as a reasonable default strategy because it reduces biases that can impact non-randomized studies, especially when investigators use healthcare databases. We review case studies where investigators have explored the consequences of designing a cohort study by restricting to incident users, but most of the discussion has been informed by expert opinion, not by systematic evidence. Published 2012. This article is a U.S. Government work and is in the public domain in the USA.

Evaluation of maintenance strategies.

DOT National Transportation Integrated Search

2013-11-01

In the mid1990s, the Arizona Department of Transportation (ADOT) initiated the Maintenance Cost : Effectiveness study (SPR 371) with the development of plans and an experiment design to evaluate the : effectiveness of a variety of asphalt pavement...

Improved corrosion inspection procedures for reinforced concrete bridges : electrical resistivity of concrete.

DOT National Transportation Integrated Search

2015-07-01

The effects of steel reinforcement and chloride-induced corrosion initiation on the electrical resistivity measurements using the Wenner : probe technique were studied experimentally on custom-designed reinforced concrete slabs. Investigation paramet...

NASA's post-Challenger safety program - Themes and thrusts

NASA Technical Reports Server (NTRS)

Rodney, G. A.

1988-01-01

The range of managerial, technical, and procedural initiatives implemented by NASA's post-Challenger safety program is reviewed. The recommendations made by the Rogers Commission, the NASA post-Challenger review of Shuttle design, the Congressional investigation of the accident, the National Research Council, the Aerospace Safety Advisory Panel, and NASA internal advisory panels and studies are summarized. NASA safety initiatives regarding improved organizational accountability for safety, upgraded analytical techniques and methodologies for risk assessment and management, procedural initiatives in problem reporting and corrective-action tracking, ground processing, maintenance documentation, and improved technologies are discussed. Safety issues relevant to the planned Space Station are examined.

Proceedings of the Army Symposium on Solid Mechanics, 1976 - Composite Materials: The Influence of Mechanics of Failure on Design

DTIC Science & Technology

1976-09-01

SOFTENING STRIP DESIGN CONCEPTS Initial studies of softening strip design concepts were presented by Eisenmann (8) in boron/epoxy laminates. His...Metals," Foreign Object Impact Damage to Composites, ASTM-STP-568, 1974. 8. Eisenmann , J. R., and Kaminski, B. E., "Fracture Control for Composite...REFERENCES 1. Waddoups, M.E., Eisenmann , J.R., and Kaminski, B.E., Journal of Composite Materials, Vol. 5, October 1971, pp. 446-454. 2. Whitney

Association Between Direct-to-Consumer Advertising and Testosterone Testing and Initiation in the United States, 2009–2013

PubMed Central

Layton, J. Bradley; Kim, Yoonsang; Alexander, G. Caleb; Emery, Sherry L.

2017-01-01

IMPORTANCE Testosterone initiation increased substantially in the United States from 2000 to 2013, especially among men without clear indications. Direct-to-consumer advertising (DTCA) also increased during this time. OBJECTIVE To investigate associations between televised DTCA and testosterone testing and initiation in the United States. DESIGN, SETTING, AND POPULATION Ecologic study conducted in designated market areas (DMAs) in the United States. Monthly testosterone advertising ratings were linked to DMA-level testosterone use data from 2009–2013 derived from commercial insurance claims. Associations between DTCA and testosterone testing, initiation, and initiation without recent baseline tests were estimated using Poisson generalized estimating equations. EXPOSURES Monthly Nielsen ratings for testosterone DTCA in the 75 largest DMAs. MAIN OUTCOMES AND MEASURES (1) Rates of new serum testosterone testing; (2) rates of testosterone initiation (in-office injection, surgical implant, or pharmacy dispensing) for all testosterone products combined and for specific brands; and (3) rates of testosterone initiation without recent serum testosterone testing. RESULTS Of 17 228 599 commercially insured men in the 75 DMAs, 1 007 990 (mean age, 49.6 [SD, 11.5] years) had new serum testosterone tests and 283 317 (mean age, 51.8 [SD, 11.3] years) initiated testosterone treatment. Advertising intensity varied by geographic region and time, with the highest intensity seen in the southeastern United States and with months ranging from no ad exposures to a mean of 13.6 exposures per household. Nonbranded advertisements were common prior to 2012, with branded advertisements becoming more common during and after 2012. Each household advertisement exposure was associated with a monthly increase in rates of new testosterone testing (rate ratio [RR], 1.006; 95% CI, 1.004–1.008), initiation (RR, 1.007; 95% CI, 1.004–1.010), and initiation without a recent test (RR, 1.008; 95% CI, 1.002–1.013). Mean absolute rate increases were 0.14 tests (95% CI, 0.09–0.19), 0.05 new initiations (95% CI, 0.03–0.08), and 0.02 initiations without a recent test (95% CI, 0.01–0.03) per 10 000 men for each monthly ad exposure over the entire period. CONCLUSIONS AND RELEVANCE Among US men residing in the 75 designated market areas, regional exposure to televised direct-to-consumer advertising was associated with greater testosterone testing, new initiation, and initiation without recent testing. PMID:28324090

Social Early Stimulation of Trisomy-21 Babies

ERIC Educational Resources Information Center

Aparicio, Maria Teresa Sanz; Balana, Javier Menendez

2003-01-01

This study was initiated with twenty Down's syndrome babies to verify whether subjects undergoing social early stimulation would benefit from this type of treatment. An experimental study was designed with two training groups: visual or written instructions. The analyses of the results established statistically significant differences in the…

The Edison Environmental Center Permeable Pavement Site: Initial Results from a Stormwater Control Designed for Monitoring

EPA Science Inventory

There are few detailed studies of full-scale, replicated, actively-used permeable pavement systems. Practitioners need additional studies of permeable pavement systems in its intended application (parking lot, roadway, etc.) across a range of climatic events, daily usage conditio...

U.S. Transit Track Restraining Rail. Volume I : Study of Requirements and Practices

DOT National Transportation Integrated Search

1981-12-01

This report covers a study of restraining rails in transit track, which is part of the current research program of UMTA and was initiated: (1) to assist in the analysis, design, and maintenance and operation of transit track; (2) to compile guideline...

77 FR 35404 - Agency Forms Undergoing Paperwork Reduction Act Review

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-13

... opting in will be texted survey questions one at a time. Before initiating the feasibility study, CDC... of Smartphones to Collect Information about Health Behaviors: Feasibility Study--New--National Center... is needed for the design, implementation, and evaluation of public health programs. The evolution of...

PETROLEUM HYDROCARBONS IN THE NORTHERN PUGET SOUND AREA. A PILOT DESIGN STUDY

EPA Science Inventory

Hydrocarbon baseline data are needed to assess the potential impact of oil contamination from increased tanker traffic in the Strait of Juan de Fuca. Initial studies were directed to intertidal sediments, mussels and snails from two physically similar areas: Port Angeles, WA and ...

An Investigation of an Intervention to Promote Inference Generation by Adolescent Poor Comprehenders

ERIC Educational Resources Information Center

Denton, Carolyn A.; York, Mary J.; Francis, David J.; Haring, Christa; Ahmed, Yusra; Bidulescu, Adrian

2017-01-01

This brief experimental study investigated the initial promise of an intervention designed to promote inference generation in adolescents with reading comprehension difficulties. The intervention, provided for nine sessions, included multisyllable word study, teacher explanation and modeling of inference generation and other comprehension…

A Summary of Proceedings for the Advanced Deployable Day/Night Simulation Symposium

DTIC Science & Technology

2009-07-01

initiated to design , develop, and deliver transportable visual simulations that jointly provide night-vision and high-resolution daylight capability. The...Deployable Day/Night Simulation (ADDNS) Technology Demonstration Project was initiated to design , develop, and deliver transportable visual...was Dr. Richard Wildes (York University); Mr. Vitaly Zholudev (Department of Computer Science, York University), Mr. X. Zhu (Neptec Design Group), and

The Science behind Curriculum Development and Evaluation: Taking a Design Science Approach in the Production of a Tier 2 Mathematics Curriculum

ERIC Educational Resources Information Center

Doabler, Christian T.; Clarke, Ben; Fien, Hank; Baker, Scott K.; Kosty, Derek B.; Cary, Mari Strand

2015-01-01

The production of an effective mathematics curriculum begins with a scientific development, evaluation, and revision framework. The purpose of this study was to conduct an initial investigation of a recently developed Tier 2 mathematics curriculum designed to improve the outcomes of first grade students at risk for mathematics difficulties (MD).…

Lessons Learned from the San Diego Urban Systemic Project (USP): Implications for Funders and Future Project Designers

ERIC Educational Resources Information Center

St. John, Mark; Heenan, Barbara; Helms, Jenifer

2007-01-01

This brief draws upon the five-year evaluation study of the San Diego Urban Systemic Project (USP) that Inverness Research Associates conducted from 2001 to 2006. The intended audiences for this brief are those interested in investing in, supporting, or designing initiatives that aim to improve math and science education in large urban districts.…

"There Were High Hopes and High Projections:" Examining the Social Construction of Target Populations in the Policy Design of the Arkansas Lottery Legislation

ERIC Educational Resources Information Center

Copeland, Kristopher

2013-01-01

Lottery policies have been created by many states to generate additional funds to support public initiatives, such as higher education scholarships. In 2009, Arkansas adopted a lottery to generate higher education scholarships. The purpose of this qualitative case study was to examine the Arkansas state lottery policy design process to better…

Free breakfasts in schools: design and conduct of a cluster randomised controlled trial of the Primary School Free Breakfast Initiative in Wales [ISRCTN18336527

PubMed Central

Moore, Laurence; Moore, Graham F; Tapper, Katy; Lynch, Rebecca; Desousa, Carol; Hale, Janine; Roberts, Chris; Murphy, Simon

2007-01-01

Background School-based breakfast provision is increasingly being seen as a means of improving educational performance and dietary behaviour amongst children. Furthermore, recognition is growing that breakfast provision offers potential as a means of addressing social inequalities in these outcomes. At present however, the evidence base on the effectiveness of breakfast provision in bringing about these improvements is limited. Methods/Design This paper describes the research design of a large scale evaluation of the effectiveness of the Welsh Assembly Government's Primary School Free Breakfast Initiative. A cluster randomised trial, with school as the unit of randomisation was used for the outcome evaluation, with a nested qualitative process evaluation. Quantitative outcome measures included dietary habits, attitudes, cognitive function, classroom behaviour, and school attendance. The study recruited 111 primary schools in Wales, of which 56 were randomly assigned to control condition and 55 to intervention. Participants were Year 5 and 6 students (aged 9–11 years) in these schools. Data were collected for all 111 schools at each of three time points: baseline, 4 month and 12 month follow-up. This was achieved through a repeated cross-sectional survey of approximately 4350 students on each of these occasions. Of those students in Year 5 at baseline, 1975 provided data at one or both of the follow-ups, forming a nested cohort. The evaluation also included a nested process evaluation, using questionnaires, semi-structured interviews and case studies with students, school staff, and local authority scheme coordinators as key informants. Discussion An overview of the methods used for the evaluation is presented, providing an example of the feasibility of conducting robust evaluations of policy initiatives using a randomised trial design with nested process evaluation. Details are provided of response rates and the flow of participants. Reflection is offered on methodological issues encountered at various stages through the course of the study, focusing upon issues associated with conducting a randomised trial of a government policy initiative, and with conducting research in school settings. Trial registration Current Controlled Trials ISRCTN18336527 PMID:17888158

Ergonomic design of crane cabins: a case study from a steel plant in India.

PubMed

Ray, Pradip Kumar; Tewari, V K

2012-01-01

The study, carried out at the Batch Annealing Furnace (BAF) shop of Cold Rolling Mill (CRM) at an integrated steel plant of India, concerns ergonomic evaluation and redesign of a manually-operated Electrical Overhead Travelling (EOT) crane cabin. The crane cabin is a complex worksystem consisting of the crane operator and twelve specific machine components embedded in a closed workspace. A crane operator has to perform various activities, such as loading and unloading of coils, setting and removal of convector plates, and routine maintenance work. Initially, an operator had to work in standing posture with bent back most of the time. Ergonomically poor design of the chair and the controls, awkward work postures, and insufficient vision angle resulting in musculoskeletal disorders (MSDs) are some of the critical problems observed.. The study, conceived as an industry-academia joint initiative, was undertaken by a design team, the members of which were drawn from both the company concerned and the institute. With the project executed successfully, a number of lessons, such as how to minimize the anthropometric mismatch, how to improve the layout of the components and controls within enclosed workspace, and how to improve work posture minimizing risk of MSDs have been learned.

Advancing Health Professions Education Research by Creating a Network of Networks.

PubMed

Carney, Patricia A; Brandt, Barbara; Dekhtyar, Michael; Holmboe, Eric S

2018-02-27

Producing the best evidence to show educational outcomes, such as competency achievement and credentialing effectiveness, across the health professions education continuum will require large multisite research projects and longitudinal studies. Current limitations that must be overcome to reach this goal include the prevalence of single-institution study designs, assessments of a single curricular component, and cross-sectional study designs that provide only a snapshot in time of a program or initiative rather than a longitudinal perspective.One solution to overcoming these limitations is to develop a network of networks that collaborates, using longitudinal approaches, across health professions and regions of the United States. Currently, individual networks are advancing educational innovation toward understanding the effectiveness of educational and credentialing programs. Examples of such networks include: (1) the American Medical Association's Accelerating Change in Medical Education initiative, (2) the National Center for Interprofessional Practice and Education, and (3) the Accreditation Council for Graduate Medical Education's Accreditation System. In this Invited Commentary, the authors briefly profile these existing networks, identify their progress and the challenges they have encountered, and propose a vigorous way forward toward creating a national network of networks designed to determine the effectiveness of health professions education and credentialing.

Energy Efficiency Performance in Refurbishment Projects with Design Team Attributes As A Mediator: A Pilot Study

NASA Astrophysics Data System (ADS)

Sekak, Siti Nor Azniza Ahmad; Rahmat Dr, Ismail, Prof.; Yunus, Julitta; Saád, Sri Rahayu Mohd; Hanafi Azman Ong, Mohd

2017-12-01

The Energy Efficiency (EE) plays an important role over the building life cycle and the implementation of EE in refurbishment projects has a significant potential towards the reduction of greenhouse gas emissions. However, the involvement of the design team at the early stage of the refurbishment projects will determine the success of EE implementations. Thus, a pilot study was conducted at the initial stage of the data collection process of this research to validate and verify the questionnaires.

Experimental design of laminar proportional amplifiers

NASA Technical Reports Server (NTRS)

Hellbaum, R. F.

1976-01-01

An experimental program was initiated at Langley Research Center to study the effects of various parameters on the design of laminar proportional beam deflection amplifiers. Matching and staging of amplifiers to obtain high-pressure gain was also studied. Variable parameters were aspect ratio, setback, control length, receiver distance, receiver width, width of center vent, and bias pressure levels. Usable pressure gains from 4 to 19 per stage can now be achieved, and five amplifiers were staged together to yield pressure gains up to 2,000,000.

Recommendations of the VAC2VAC workshop on the design of multi-centre validation studies.

PubMed

Halder, Marlies; Depraetere, Hilde; Delannois, Frédérique; Akkermans, Arnoud; Behr-Gross, Marie-Emmanuelle; Bruysters, Martijn; Dierick, Jean-François; Jungbäck, Carmen; Kross, Imke; Metz, Bernard; Pennings, Jeroen; Rigsby, Peter; Riou, Patrice; Balks, Elisabeth; Dobly, Alexandre; Leroy, Odile; Stirling, Catrina

2018-03-01

Within the Innovative Medicines Initiative 2 (IMI 2) project VAC2VAC (Vaccine batch to vaccine batch comparison by consistency testing), a workshop has been organised to discuss ways of improving the design of multi-centre validation studies and use the data generated for product-specific validation purposes. Moreover, aspects of validation within the consistency approach context were addressed. This report summarises the discussions and outlines the conclusions and recommendations agreed on by the workshop participants. Copyright © 2018.

Conceptual design study of 1985 commercial VTOL transports that utilize rotors

NASA Technical Reports Server (NTRS)

Kefford, N. F. K.; Munch, C. L.

1975-01-01

Conceptual design studies of pure and compound helicopter commercial short-haul transport aircraft for initial fabrication in 1980 were performed to determine their technical and economic feasibility. One-hundred-passenger configurations were optimized for minimum direct operating cost consistent with producibility and marketability, with emphasis on proper account of mass properties, performance and handling qualities adequacy, and suppression of internal and external noise. The effect of external noise constraints was assessed, in terms of gross weight and direct operating cost, for each aircraft.

Corn blight review: Sampling model and ground data measurements program

NASA Technical Reports Server (NTRS)

Allen, R. D.

1972-01-01

The sampling plan involved the selection of the study area, determination of the flightline and segment sample design within the study area, and determination of a field sample design. Initial interview survey data consisting of crop species acreage and land use were collected. On all corn fields, additional information such as seed type, row direction, population, planting date, ect. were also collected. From this information, sample corn fields were selected to be observed through the growing season on a biweekly basis by county extension personnel.

Increasing the health promotion practices of workplaces in Australia with a proactive telephone-based intervention.

PubMed

Daly, Justine; Licata, Milly; Gillham, Karen; Wiggers, John

2005-01-01

The aim of this study was to explore the potential effectiveness of a proactive telephone-based intervention in increasing workplace adoption of health promotion initiatives. A telephone-based direct marketing strategy was used to contact a sample of Australian workplaces to encourage the adoption of health promotion initiatives. Workplaces were offered free services and resources designed to facilitate adoption of health promotion initiatives. A total of 227 (71%) workplaces provided informed consent to participate in both baseline and 4-year follow-up surveys. Significant increases were evident for seven of the eight health promotion initiatives. The findings of this study suggest that a proactive telephone-based intervention has the potential to be effective in increasing the prevalence of health promotion initiatives across a range of health topics in a large population of workplaces. Given the capacity to reach an entire population of workplaces, this approach represents a promising means of achieving the established potential of workplace health promotion.

Biodrying of sewage sludge: kinetics of volatile solids degradation under different initial moisture contents and air-flow rates.

PubMed

Villegas, Manuel; Huiliñir, Cesar

2014-12-01

This study focuses on the kinetics of the biodegradation of volatile solids (VS) of sewage sludge for biodrying under different initial moisture contents (Mc) and air-flow rates (AFR). For the study, a 3(2) factorial design, whose factors were AFR (1, 2 or 3L/minkgTS) and initial Mc (59%, 68% and 78% w.b.), was used. Using seven kinetic models and a nonlinear regression method, kinetic parameters were estimated and the models were analyzed with two statistical indicators. Initial Mc of around 68% increases the temperature matrix and VS consumption, with higher moisture removal at lower initial Mc values. Lower AFRs gave higher matrix temperatures and VS consumption, while higher AFRs increased water removal. The kinetic models proposed successfully simulate VS biodegradation, with root mean square error (RMSE) between 0.007929 and 0.02744, and they can be used as a tool for satisfactory prediction of VS in biodrying. Copyright © 2014 Elsevier Ltd. All rights reserved.

Evaluating the performance of vehicular platoon control under different network topologies of initial states

NASA Astrophysics Data System (ADS)

Li, Yongfu; Li, Kezhi; Zheng, Taixiong; Hu, Xiangdong; Feng, Huizong; Li, Yinguo

2016-05-01

This study proposes a feedback-based platoon control protocol for connected autonomous vehicles (CAVs) under different network topologies of initial states. In particularly, algebraic graph theory is used to describe the network topology. Then, the leader-follower approach is used to model the interactions between CAVs. In addition, feedback-based protocol is designed to control the platoon considering the longitudinal and lateral gaps simultaneously as well as different network topologies. The stability and consensus of the vehicular platoon is analyzed using the Lyapunov technique. Effects of different network topologies of initial states on convergence time and robustness of platoon control are investigated. Results from numerical experiments demonstrate the effectiveness of the proposed protocol with respect to the position and velocity consensus in terms of the convergence time and robustness. Also, the findings of this study illustrate the convergence time of the control protocol is associated with the initial states, while the robustness is not affected by the initial states significantly.

Assigning Robust Default Values in Building Performance Simulation Software for Improved Decision-Making in the Initial Stages of Building Design.

PubMed

Hiyama, Kyosuke

2015-01-01

Applying data mining techniques on a database of BIM models could provide valuable insights in key design patterns implicitly present in these BIM models. The architectural designer would then be able to use previous data from existing building projects as default values in building performance simulation software for the early phases of building design. The author has proposed the method to minimize the magnitude of the variation in these default values in subsequent design stages. This approach maintains the accuracy of the simulation results in the initial stages of building design. In this study, a more convincing argument is presented to demonstrate the significance of the new method. The variation in the ideal default values for different building design conditions is assessed first. Next, the influence of each condition on these variations is investigated. The space depth is found to have a large impact on the ideal default value of the window to wall ratio. In addition, the presence or absence of lighting control and natural ventilation has a significant influence on the ideal default value. These effects can be used to identify the types of building conditions that should be considered to determine the ideal default values.

Assigning Robust Default Values in Building Performance Simulation Software for Improved Decision-Making in the Initial Stages of Building Design

PubMed Central

2015-01-01

Applying data mining techniques on a database of BIM models could provide valuable insights in key design patterns implicitly present in these BIM models. The architectural designer would then be able to use previous data from existing building projects as default values in building performance simulation software for the early phases of building design. The author has proposed the method to minimize the magnitude of the variation in these default values in subsequent design stages. This approach maintains the accuracy of the simulation results in the initial stages of building design. In this study, a more convincing argument is presented to demonstrate the significance of the new method. The variation in the ideal default values for different building design conditions is assessed first. Next, the influence of each condition on these variations is investigated. The space depth is found to have a large impact on the ideal default value of the window to wall ratio. In addition, the presence or absence of lighting control and natural ventilation has a significant influence on the ideal default value. These effects can be used to identify the types of building conditions that should be considered to determine the ideal default values. PMID:26090512

Study on the design schemes of the air-conditioning system in a gymnasium

NASA Astrophysics Data System (ADS)

Zhang, Yujin; Wu, Xinwei; Zhang, Jing; Pan, Zhixin

2017-08-01

In view of designing the air conditioning project for a gymnasium successfully, the cooling and heating source schemes are fully studied by analyzing the surrounding environment and energy conditions of the project, as well as the analysis of the initial investment and operating costs, which indicates the air source heat pump air conditioning system is the best choice for the project. The indoor air conditioning schemes are also studied systematically and the optimization of air conditioning schemes is carried out in each area. The principle of operating conditions for the whole year is followed and the quality of indoor air and energy-saving are ensured by the optimized design schemes, which provide references for the air conditioning system design in the same kinds of building.

Computational Fluid Dynamics (CFD) Design of a Blended Wing Body (BWB) with Boundary Layer Ingestion (BLI) Nacelles

NASA Technical Reports Server (NTRS)

Morehouse, Melissa B.

2001-01-01

A study is being conducted to improve the propulsion/airframe integration for the Blended Wing-Body (BWB) configuration with boundary layer ingestion nacelles. TWO unstructured grid flow solvers, USM3D and FUN3D, have been coupled with different design methods and are being used to redesign the aft wing region and the nacelles to reduce drag and flow separation. An initial study comparing analyses from these two flow solvers against data from a wind tunnel test as well as predictions from the OVERFLOW structured grid code for a BWB without nacelles has been completed. Results indicate that the unstructured grid codes are sufficiently accurate for use in design. Results from the BWB design study will be presented.

A Study of Teachers' Perception of Schools' Organizational Health in Osun State

ERIC Educational Resources Information Center

Omoyemiju, Michael Adeniyi; Adediwura, Alaba Adeyemi

2011-01-01

This study examined the teachers' perceptions of school organizational health (i.e. resource support, job satisfaction among staff, morale boosts, institutional integrity and initiating structure). Descriptive survey design was used for the study. The sample was composed of 330 secondary school teachers randomly selected from 283, 826 secondary…

Students' Perceptions of Reading and Learning in Social Studies: A Multimethod Approach

ERIC Educational Resources Information Center

Beck, Jori S.; Buehl, Michelle M.; Taboada Barber, Ana

2015-01-01

This article conveys the findings from 2 separate, but related, investigations designed to uncover students' perceptions of reading and learning in middle school social studies as well as their engagement in this content area. Study 1 utilized semistructured interviews as an initial foray into understanding students' perceptions of reading and…

The Heroes' Journey: A Young Couple's Experience with Choriocarcinoma

ERIC Educational Resources Information Center

Marlowe, Dan; Hodgson, Jennifer; Lamson, Angela

2010-01-01

A 20 year retrospective qualitative case study was conducted to investigate the relational impact of choriocarcinoma (a type of gestational cancer) on a couple of child-bearing age. A unique feature to the study was that the primary investigator was the couple's biological son, initiating the first known auto-case study design. Using holistic…

Understanding the Factors that Characterise School-Community Partnerships: The Case of the Logan Healthy Schools Project

ERIC Educational Resources Information Center

Thomas, Melinda; Rowe, Fiona; Harris, Neil

2010-01-01

Purpose: The purpose of this study is to examine the factors that characterise effective school-community partnerships that support the sustainability of school health initiatives applied within a health-promoting schools approach. Design/methodology/approach: The study used an explanatory case study approach of five secondary schools…

Guidelines for the Clinical Evaluation of Psychoactive Drugs in Infants and Children.

ERIC Educational Resources Information Center

Food and Drug Administration (DHEW), Washington, DC.

These guidelines are intended to help those who design and conduct investigations of psychopharmacologic agents in children. A progression of studies in four phases is advocated. First, early short term studies should establish single and multiple dose safety baselines. Second, early pilot efficacy studies may be initiated jointly with longer…

A Mental Health Training Format for Adult Education Teachers

ERIC Educational Resources Information Center

Meek, Fiona; Specht, Jacqueline; Rodger, Susan

2017-01-01

The present study investigated the needs of adult education staff pertaining to adult students' mental health issues within a local school board. The study utilized mixed-methods design and was divided into progression of three separate studies. An initial focus group was conducted to identify the 12 participants' concerns and provide a direction…

Development of a Submillimeter Multipass Spectrometer for the Study of Molecular Ions

NASA Astrophysics Data System (ADS)

Carroll, A.; Rocher, B.; Laas, J. C.; Deprince, B. A.; Hays, B.; Weaver, S. L. Widicus; Lang, S.

2012-06-01

We have developed a multipass spectrometer for the submillimeter spectral region that is being used to study molecular ions through gas phase spectroscopy. The optical configuration is based on the design of Perry and coworkers that was implemented in the optical regime. To our knowledge, this is the first implementation of this optical configuration at long wavelengths. The setup involves two nearly concentric spherical mirrors that focus the multiple beam passes into a small area, or ``waist'', in the middle of the sample chamber. A supersonic molecular beam is coupled to the setup so that the molecular beam crosses the optical path at the waist. Initial studies have focused on neutral test molecules to probe the physical properties of the molecular beam under various arrangements of the molecular source relative to the optical path. Current studies focus on coupling a plasma discharge source to the setup to enable the study of molecular ions. Here we present the design of this instrument, compare the spectrometer capabilities to a traditional single pass spectrometer, and discuss the results of initial spectroscopic studies.

Human Resources Data in Weapon System Design: An Initial Plan for Development of a Unified Data Base.

DTIC Science & Technology

1980-11-01

Dela Bnrted) Item 19 Continued: system design design handbooks maintenance manpower simulation de’ision options cost estimating relationships prediction...determine the extent to which human resources data (HRD) are used in early system design. The third was to assess the availability and ade - quacy of...relationships, regression analysis, comparability analysis, expected value techniques) to provide initial data values in the very early stages of weapon system

Initial results of the Global Thermospheric Mapping Study (GTMS)

NASA Technical Reports Server (NTRS)

Oliver, W. L.; Salah, J. E.; Musgrove, R. G.; Holt, J. M.; Wickwar, V. B.; Hernandez, G. J.; Roble, R. G.

1986-01-01

The Global Thermospheric Mapping Study (GTMS) is a multi-technique experimental study of the thermosphere designed to map simultaneously its spatial and temporal morphology with a thoroughness and diversity of measurement techniques heretofore unachieved. The GTMS is designed around the Incoherent Scatter Radar Chain in the western hemisphere. The European incoherent scatter radars and the worldwide communities of Fabry-Perot interferometers, meteor wind radars, partial reflection drifts radars, MST radars, and satellite probes are included to extend the spatial coverage and types of measurements available. Theoretical and modeling support in the areas of thermospheric and ionospheric structure, tides, and electric fields are included to aid in program planning and data interpretation. Solar activity was low on the three observation days (F10.7 = 97, 98, 96) and magnetic conditions were unsettled to active (A = 10, 12, 20). All six incoherent scatter radar facilities collected data. Each collected F region data day and night while Saint Santin and Millstone Hill additionally collected E region data during daylight hours. Initial results from Sondrestrom and Millstone Hill are presented. Good quality Fabry Perot data were collected at Fritz Peak and San Jose dos Campos. Weather conditions produced poor results at Arequipa and Arecibo. Initial results from Fritz Peak are presented. Mesosphere/lower-thermosphere observations were conducted under the ATMAP organization. The magnetometer chains also were operational during this campaign. Initial thermospheric general circulation model predictions were made for assumed solar-geophysical conditions, and selected results are presented.

Cornell Alliance for Science Evaluation of Consensus on Genetically Modified Food Safety: Weaknesses in Study Design

PubMed Central

Antoniou, Michael N.; Robinson, Claire J.

2017-01-01

Cornell Alliance for Science has launched an initiative in which “citizen scientists” are called upon to evaluate studies on health risks of genetically modified (GM) crops and foods. The purpose is to establish whether the consensus on GM food safety claimed by the American Association for the Advancement of Science (AAAS) is supported by a review of the scientific literature. The Alliance’s citizen scientists are examining more than 12,000 publication abstracts to quantify how far the scientific literature supports the AAAS’s statement. We identify a number of fundamental weaknesses in the Alliance’s study design, including evaluation is based only on information provided in the publication abstract; there is a lack of clarity as to what material is included in the 12,000 study abstracts to be reviewed, since the number of appropriately designed investigations addressing GM food safety are few; there is uncertainty as to whether studies of toxic effects arising from GM crop-associated pesticides will be included; there is a lack of clarity regarding whether divergent yet equally valid interpretations of the same study will be taken into account; and there is no definition of the cutoff point for consensus or non-consensus on GM food safety. In addition, vital industry proprietary biosafety data on GM crops and associated pesticides are not publicly available and is thus cannot inform this project. Based on these weaknesses in the study design, we believe it is questionable as to whether any objective or meaningful conclusion can be drawn from the Alliance’s initiative. PMID:28447029

Cornell Alliance for Science Evaluation of Consensus on Genetically Modified Food Safety: Weaknesses in Study Design.

PubMed

Antoniou, Michael N; Robinson, Claire J

2017-01-01

Cornell Alliance for Science has launched an initiative in which "citizen scientists" are called upon to evaluate studies on health risks of genetically modified (GM) crops and foods. The purpose is to establish whether the consensus on GM food safety claimed by the American Association for the Advancement of Science (AAAS) is supported by a review of the scientific literature. The Alliance's citizen scientists are examining more than 12,000 publication abstracts to quantify how far the scientific literature supports the AAAS's statement. We identify a number of fundamental weaknesses in the Alliance's study design, including evaluation is based only on information provided in the publication abstract; there is a lack of clarity as to what material is included in the 12,000 study abstracts to be reviewed, since the number of appropriately designed investigations addressing GM food safety are few; there is uncertainty as to whether studies of toxic effects arising from GM crop-associated pesticides will be included; there is a lack of clarity regarding whether divergent yet equally valid interpretations of the same study will be taken into account; and there is no definition of the cutoff point for consensus or non-consensus on GM food safety. In addition, vital industry proprietary biosafety data on GM crops and associated pesticides are not publicly available and is thus cannot inform this project. Based on these weaknesses in the study design, we believe it is questionable as to whether any objective or meaningful conclusion can be drawn from the Alliance's initiative.

[Reasons for not initating HCV treatment in prison: a subanalysis of the EPIBAND study].

PubMed

de Juan, J; Faraco, I; Saiz de la Hoya, P; Marco, A; Yllobre, C; Da Silva, A; del Pozo, E; Veiras, F M

2011-01-01

This sub-analysis was designed within the framework of the EPIBAND study to establish the reasons why prison patients do not initiate HCV treatment. Epidemiological, prospective, multicentre study conducted in 26 centres. We present the results from those patients included in the EPIBAND study who did not initiate HCV treatment for different reasons. A total of 195 patients were evaluated (average age 39 ± 6.6 years, 86.7% male and 96.9% Spanish nationality). The reasons why this population did not initiate HCV treatment were secondary ones relating to the patient (41%), medical reasons (30.8%), and the prison environment (3.6%). 47.5% of patients reported lack of awareness and motivation, and 18.8% did not initiate treatment as a result of adverse events. Immunological status (35%). as well as psychiatric and neurological disorders (28.3%) were the main medical reasons for contraindication. Aspects associated to prison environment such as impending release or change of prison (64.4%) were among the various reasons that influenced treatment initiation. Lack of motivation and awareness in patients as well as adverse events were the main reasons for not initiating therapy. These factors are subjective, modifiable aspects that depend on patient education and adequate medical care.

FINAL WHITE PAPER: ASSESSMENT OF EXISTING LINKAGES WITH LOCAL COMMUNITIES AMONG POTENTIAL RESEARCH SITES FOR THE NATIONAL CHILDREN'S STUDY

EPA Science Inventory

This paper was prepared to assist the planners of the National Childrens Study (NCS) as they assess possible study design options and consider the role of the community in this initiative. The consensus among the planners is to involve the community in the conduct of the< study. ...

Design and Implementation of a Multi-Strategy, Collegewide Program of Evaluation and Planning: The Mercy College Self-Study Project.

ERIC Educational Resources Information Center

Kraetzer, Mary C.; And Others

The rationale, strategies, and methods of The Mercy College Self-Study Project are considered, and evaluation instruments are provided. This program of institutional evaluation and planning was initiated in 1980 and consists of: standardized surveys, a 10-year longitudinal (panel) study, and academic department self-studies. Questionnaires…

Design and implementation of components for a bioregenerative system for growing higher order plants in space

NASA Technical Reports Server (NTRS)

Brakman, B.; Dioso, L.; Parker, D.; Segal, L.; Merriman, C.; Howard, I.; Vu, H.; Anderson, K.; Riley, S.; Amery, D.

1989-01-01

This report summarizes the efforts of the NASA/USRA Advanced Design Program during the 1988-89 scholastic year. The primary goal was to address specific needs in the design of an integrated system to grow higher order plants in space. The initial phase of the design effort concentrated on studying such a system and identifying its needs. Once these needs were defined, emphasis was placed on the design and fabrication of devices to meet them. Specific attention was placed on a hand-held harvester, a nutrient concentration sensor, an air-water separator, and a closed-loop biological system simulation.

Virtual Reality as Innovative Approach to the Interior Designing

NASA Astrophysics Data System (ADS)

Kaleja, Pavol; Kozlovská, Mária

2017-06-01

We can observe significant potential of information and communication technologies (ICT) in interior designing field, by development of software and hardware virtual reality tools. Using ICT tools offer realistic perception of proposal in its initial idea (the study). A group of real-time visualization, supported by hardware tools like Oculus Rift HTC Vive, provides free walkthrough and movement in virtual interior with the possibility of virtual designing. By improving of ICT software tools for designing in virtual reality we can achieve still more realistic virtual environment. The contribution presented proposal of an innovative approach of interior designing in virtual reality, using the latest software and hardware ICT virtual reality technologies

En route air traffic flow simulation.

DOT National Transportation Integrated Search

1971-01-01

The report covers the conception, design, development, and initial implementation of an advanced simulation technique applied to a study of national air traffic flow and its control by En Route Air Route Traffic Control Centers (ARTCC). It is intende...

Aqueous Ethanol Ignition and Engine Studies, Phase I

DOT National Transportation Integrated Search

2010-09-01

Our objectives were to design a micro-dilution tunnel for monitoring engine emissions, measure ignition temperature and heat release from ethanol-water-air mixtures on platinum, and initiate a computational fluid dynamics model of a catalytic igniter...

Practical solution concepts for planning and designing roadways in Kentucky.

DOT National Transportation Integrated Search

2008-10-01

Kentucky's highway agency has embarked upon an initiative tagged "Practical Solutions" which sets its goal toward reducing costs throughout the project development process extended into operations and maintenance of all highway facilities. This study...

Thermal effects in the Input Optics of the Enhanced Laser Interferometer Gravitational-Wave Observatory interferometers.

PubMed

Dooley, Katherine L; Arain, Muzammil A; Feldbaum, David; Frolov, Valery V; Heintze, Matthew; Hoak, Daniel; Khazanov, Efim A; Lucianetti, Antonio; Martin, Rodica M; Mueller, Guido; Palashov, Oleg; Quetschke, Volker; Reitze, David H; Savage, R L; Tanner, D B; Williams, Luke F; Wu, Wan

2012-03-01

We present the design and performance of the LIGO Input Optics subsystem as implemented for the sixth science run of the LIGO interferometers. The Initial LIGO Input Optics experienced thermal side effects when operating with 7 W input power. We designed, built, and implemented improved versions of the Input Optics for Enhanced LIGO, an incremental upgrade to the Initial LIGO interferometers, designed to run with 30 W input power. At four times the power of Initial LIGO, the Enhanced LIGO Input Optics demonstrated improved performance including better optical isolation, less thermal drift, minimal thermal lensing, and higher optical efficiency. The success of the Input Optics design fosters confidence for its ability to perform well in Advanced LIGO.

Evaluation of Fracture Initiation in the Mannesmann Piercing Process

NASA Astrophysics Data System (ADS)

Fanini, S.; Ghiotti, A.; Bruschi, S.

2007-04-01

One of the challenging objectives in studying the Mannesmann piercing process is to predict the fracture initiation, known as "Mannesmann effect", in order to design and optimize the working parameters of the piercing process. The objective of the paper is to investigate the workability of a tube steel tested in the same conditions of the Mannesman piercing process. The stress and strain states as well as temperature fields arising during the process are identified through numerical simulations. The hot tensile test is chosen for fundamental studies on fracture initiation, as a tensile state of stress in the centre of the billet in the first stages of the piercing process before the plug arrival seems to be one of the main causes of the crack initiation. The material constants of energy-based models implemented in FEM codes are calculated and numerical results are compared with non-plug piercing tests carried out on the industrial plant.

Oral matrix tablet formulations for concomitant controlled release of anti-tubercular drugs: design and in vitro evaluations.

PubMed

Hiremath, Praveen S; Saha, Ranendra N

2008-10-01

The aim of the present investigation was to develop controlled release (C.R.) matrix tablet formulations of rifampicin and isoniazid combination, to study the design parameters and to evaluate in vitro release characteristics. In the present study, a series of formulations were developed with different release rates and duration using hydrophilic polymers hydroxypropyl methylcellulose (HPMC) and hydroxypropyl cellulose (HPC). The duration of rifampicin and isoniazid release could be tailored by varying the polymer type, polymer ratio and processing techniques. Further, Eudragit L100-55 was incorporated in the matrix tablets to compensate for the pH-dependent release of rifampicin. Rifampicin was found to follow linear release profile with time from HPMC formulations. In case of formulations with HPC, there was an initial higher release in simulated gastric fluid (SGF) followed by zero order release profiles in simulated intestinal fluid (SIFsp) for rifampicin. The release of isoniazid was found to be predominantly by diffusion mechanism in case of HPMC formulations, and with HPC formulations release was due to combination of diffusion and erosion. The initial release was sufficiently higher for rifampicin from HPC thus ruling out the need to incorporate a separate loading dose. The initial release was sufficiently higher for isoniazid in all formulations. Thus, with the use of suitable polymer or polymer combinations and with the proper optimization of the processing techniques it was possible to design the C.R. formulations of rifampicin and isoniazid combination that could provide the sufficient initial release and release extension up to 24h for both the drugs despite of the wide variations in their physicochemical properties.

Integrated Flight Performance Analysis of a Launch Abort System Concept

NASA Technical Reports Server (NTRS)

Tartabini, Paul V.

2007-01-01

This paper describes initial flight performance analyses conducted early in the Orion Project to support concept feasibility studies for the Crew Exploration Vehicle s Launch Abort System (LAS). Key performance requirements that significantly affect abort capability are presented. These requirements have implications on sizing the Abort Motor, tailoring its thrust profile to meet escape requirements for both launch pad and high drag/high dynamic pressure ascent aborts. Additional performance considerations are provided for the Attitude Control Motor, a key element of the Orion LAS design that eliminates the need for ballast and provides performance robustness over a passive control approach. Finally, performance of the LAS jettison function is discussed, along with implications on Jettison Motor sizing and the timing of the jettison event during a nominal mission. These studies provide an initial understanding of LAS performance that will continue to evolve as the Orion design is matured.

Hydraulic development of high specific-speed pump-turbines by means of an inverse design method, numerical flow-simulation (CFD) and model testing

NASA Astrophysics Data System (ADS)

Kerschberger, P.; Gehrer, A.

2010-08-01

In recent years an increased interest in pump-turbines has been recognized in the market. The rapid availability of pumped storage schemes and the benefits to the power system by peak lopping, providing reserve and rapid response for frequency control are becoming of growing advantage. In that context it is requested to develop pump-turbines that reliably stand dynamic operation modes, fast changes of the discharge rate by adjusting the variable diffuser vanes as well as fast changes from pump to turbine operation. Within the present study various flow patterns linked to the operation of a pump-turbine system are discussed. In that context pump and turbine mode are presented separately and different load cases at both operation modes are shown. In order to achieve modern, competitive pump-turbine designs it is further explained which design challenges should be considered during the geometry definition of a pump-turbine impeller. Within the present study a runner-blade profile for a low head pump-turbine has been developed. For the initial hydraulic runner-blade design, an inverse design method has been applied. Within this design procedure, a first blade geometry is generated by imposing the pressure loading-distribution and by means of an inverse 3D potential-flow-solution. The hydraulic behavior of both, pump-mode and turbine-mode is then evaluated by solving the full 3D Navier-Stokes equations in combination with a robust turbulence model. Based on this initial design the blade profile has been further optimized and redesigned considering various hydraulic pump-turbine requirements. Finally, the progress in hydraulic design is demonstrated by model test results which show a significant improvement in hydraulic performance compared to an existing reference design.

Implementation factors affecting the large-scale deployment of digital health and well-being technologies: A qualitative study of the initial phases of the 'Living-It-Up' programme.

PubMed

Agbakoba, Ruth; McGee-Lennon, Marilyn; Bouamrane, Matt-Mouley; Watson, Nicholas; Mair, Frances S

2016-12-01

Little is known about the factors which facilitate or impede the large-scale deployment of health and well-being consumer technologies. The Living-It-Up project is a large-scale digital intervention led by NHS 24, aiming to transform health and well-being services delivery throughout Scotland. We conducted a qualitative study of the factors affecting the implementation and deployment of the Living-It-Up services. We collected a range of data during the initial phase of deployment, including semi-structured interviews (N = 6); participant observation sessions (N = 5) and meetings with key stakeholders (N = 3). We used the Normalisation Process Theory as an explanatory framework to interpret the social processes at play during the initial phases of deployment.Initial findings illustrate that it is clear - and perhaps not surprising - that the size and diversity of the Living-It-Up consortium made implementation processes more complex within a 'multi-stakeholder' environment. To overcome these barriers, there is a need to clearly define roles, tasks and responsibilities among the consortium partners. Furthermore, varying levels of expectations and requirements, as well as diverse cultures and ways of working, must be effectively managed. Factors which facilitated implementation included extensive stakeholder engagement, such as co-design activities, which can contribute to an increased 'buy-in' from users in the long term. An important lesson from the Living-It-Up initiative is that attempting to co-design innovative digital services, but at the same time, recruiting large numbers of users is likely to generate conflicting implementation priorities which hinder - or at least substantially slow down - the effective rollout of services at scale.The deployment of Living-It-Up services is ongoing, but our results to date suggest that - in order to be successful - the roll-out of digital health and well-being technologies at scale requires a delicate and pragmatic trade-off between co-design activities, the development of innovative services and the efforts allocated to widespread marketing and recruitment initiatives. © The Author(s) 2015.

Do Patients and Oncologists Discuss the Cost of Cancer Treatment? An Observational Study of Clinical Interactions Between African American Patients and Their Oncologists.

PubMed

Hamel, Lauren M; Penner, Louis A; Eggly, Susan; Chapman, Robert; Klamerus, Justin F; Simon, Michael S; Stanton, Sarah C E; Albrecht, Terrance L

2017-03-01

Financial toxicity negatively affects patients with cancer, especially racial/ethnic minorities. Patient-oncologist discussions about treatment-related costs may reduce financial toxicity by factoring costs into treatment decisions. This study investigated the frequency and nature of cost discussions during clinical interactions between African American patients and oncologists and examined whether cost discussions were affected by patient sociodemographic characteristics and social support, a known buffer to perceived financial stress. Methods Video recorded patient-oncologist clinical interactions (n = 103) from outpatient clinics of two urban cancer hospitals (including a National Cancer Institute-designated comprehensive cancer center) were analyzed. Coders studied the videos for the presence and duration of cost discussions and then determined the initiator, topic, oncologist response to the patient's concerns, and the patient's reaction to the oncologist's response. Cost discussions occurred in 45% of clinical interactions. Patients initiated 63% of discussions; oncologists initiated 36%. The most frequent topics were concern about time off from work for treatment (initiated by patients) and insurance (initiated by oncologists). Younger patients and patients with more perceived social support satisfaction were more likely to discuss cost. Patient age interacted with amount of social support to affect frequency of cost discussions within interactions. Younger patients with more social support had more cost discussions; older patients with more social support had fewer cost discussions. Cost discussions occurred in fewer than one half of the interactions and most commonly focused on the impact of the diagnosis on patients' opportunity costs rather than treatment costs. Implications for ASCO's Value Framework and design of interventions to improve cost discussions are discussed.

Validating continuous digital light processing (cDLP) additive manufacturing accuracy and tissue engineering utility of a dye-initiator package.

PubMed

Wallace, Jonathan; Wang, Martha O; Thompson, Paul; Busso, Mallory; Belle, Vaijayantee; Mammoser, Nicole; Kim, Kyobum; Fisher, John P; Siblani, Ali; Xu, Yueshuo; Welter, Jean F; Lennon, Donald P; Sun, Jiayang; Caplan, Arnold I; Dean, David

2014-03-01

This study tested the accuracy of tissue engineering scaffold rendering via the continuous digital light processing (cDLP) light-based additive manufacturing technology. High accuracy (i.e., <50 µm) allows the designed performance of features relevant to three scale spaces: cell-scaffold, scaffold-tissue, and tissue-organ interactions. The biodegradable polymer poly (propylene fumarate) was used to render highly accurate scaffolds through the use of a dye-initiator package, TiO2 and bis (2,4,6-trimethylbenzoyl)phenylphosphine oxide. This dye-initiator package facilitates high accuracy in the Z dimension. Linear, round, and right-angle features were measured to gauge accuracy. Most features showed accuracies between 5.4-15% of the design. However, one feature, an 800 µm diameter circular pore, exhibited a 35.7% average reduction of patency. Light scattered in the x, y directions by the dye may have reduced this feature's accuracy. Our new fine-grained understanding of accuracy could be used to make further improvements by including corrections in the scaffold design software. Successful cell attachment occurred with both canine and human mesenchymal stem cells (MSCs). Highly accurate cDLP scaffold rendering is critical to the design of scaffolds that both guide bone regeneration and that fully resorb. Scaffold resorption must occur for regenerated bone to be remodeled and, thereby, achieve optimal strength.

Series-Bosch Technology for Oxygen Recovery During Lunar or Martian Surface Missions

NASA Technical Reports Server (NTRS)

Abney, Morgan B.; Mansell, J. Matthew; Rabenberg, Ellen; Stanley, Christine M.; Edmunson, Jennifer; Alleman, James E.; Chen, Kevin; Dumez, Sam

2014-01-01

Long-duration surface missions to the Moon or Mars will require life support systems that maximize resource recovery to minimize resupply from Earth. To address this need, NASA previously proposed a Series-Bosch (S-Bosch) oxygen recovery system, based on the Bosch process, which can theoretically recover 100% of the oxygen from metabolic carbon dioxide. Bosch processes have the added benefits of the potential to recover oxygen from atmospheric carbon dioxide and the use of regolith materials as catalysts, thereby eliminating the need for catalyst resupply from Earth. In 2012, NASA completed an initial design for an S-Bosch development test stand that incorporates two catalytic reactors in series including a Reverse Water-Gas Shift (RWGS) Reactor and a Carbon Formation Reactor (CFR). In 2013, fabrication of system components, with the exception of a CFR, and assembly of the test stand was initiated. Stand-alone testing of the RWGS reactor was completed to compare performance with design models. Continued testing of Lunar and Martian regolith simulants provided sufficient data to design a CFR intended to utilize these materials as catalysts. Finally, a study was conducted to explore the possibility of producing bricks from spent regolith catalysts. The results of initial demonstration testing of the RWGS reactor, results of continued catalyst performance testing of regolith simulants, and results of brick material properties testing are reported. Additionally, design considerations for a regolith-based CFR are discussed.

Series-Bosch Technology for Oxygen Recovery During Lunar or Martian Surface Missions

NASA Technical Reports Server (NTRS)

Abney, Morgan B.; Mansell, James M.; Stanley, Christine; Edmunson, Jennifer; Dumez, Samuel; Chen, Kevin; Alleman, James E.

2014-01-01

Long-duration surface missions to the Moon or Mars will require life support systems that maximize resource recovery to minimize resupply from Earth. To address this need, NASA previously proposed a Series-Bosch (S-Bosch) oxygen recovery system, based on the Bosch process, which can theoretically recover 100% of the oxygen from metabolic carbon dioxide. Bosch processes have the added benefits of the potential to recover oxygen from atmospheric carbon dioxide and the use of regolith materials as catalysts, thereby eliminating the need for catalyst resupply from Earth. In 2012, NASA completed an initial design for an S-Bosch development test stand that incorporates two catalytic reactors in series including a Reverse Water-Gas Shift (RWGS) Reactor and a Carbon Formation Reactor (CFR). In 2013, fabrication of system components, with the exception of a CFR, and assembly of the test stand was initiated. Stand-alone testing of the RWGS reactor was completed to compare performance with design models. Continued testing of Lunar and Martian regolith simulants provided sufficient data to design a CFR intended to utilize these materials as catalysts. Finally, a study was conducted to explore the possibility of producing bricks from spend regolith catalysts. The results of initial demonstration testing of the RWGS reactor, results of continued catalyst performance testing of regolith simulants, and results of brick material properties testing are reported. Additionally, design considerations for a regolith-based CFR are discussed.

Literacy Strategies in the Science Classroom The Influence of Teacher Cognitive Resources on Implementation

NASA Astrophysics Data System (ADS)

Mawyer, Kirsten Kamaile Noelani

Scientific literacy is at the heart of science reform (AAAS, 1989; 1993: NRC, 1996). These initiatives advocate inquiry-based science education reform that promotes scientific literacy as the prerequisite ability to both understand and apply fundamental scientific ideas to real-world problems and issues involving science, technology, society and the environment. It has been argued that literacy, the very ability to read and write, is foundational to western science and is essential for the attainment of scientific literacy and the reform of science education in this country (Norris & Phillips, 2004). With this wave of reform comes the need to study initiatives that seek to support science teachers, as they take on the task of becoming teachers of literacy in the secondary science classroom. This qualitative research examines one such initiative that supports and guides teachers implementing literacy strategies designed to help students develop reading skills that will allow them to read closely, effectively, and with greater comprehension of texts in the context of science. The goal of this study is to gather data as teachers learn about literacy strategies through supports built into curricular materials, professional development, and implementation in the classroom. In particular, this research follows four secondary science teachers implementing literacy strategies as they enact a yearlong earth and environmental science course comprised of two different reform science curricula. The findings of this research suggest teacher's development of teacher cognitive resources bearing on Teaching & Design can be dynamic or static. They also suggest that the development of pedagogical design capacity (PDC) can be either underdeveloped or emergent. This study contributes to current understandings of the participatory relationship between curricular resources and teacher cognitive resources that reflects the design decision of teachers. In particular, it introduces a Cognitive Resources Framework, a tool researchers can use to identify the cognitive resources of teachers, and adds to the characterization of PDC. The data emerging from this study will inform the future design and refinement of curricular and professional development materials to better support teachers as they learn, use and adapt literacy strategies in the science classroom.

US-75 ICM system design document : Dallas Integrated Corridor Management (ICM) demonstration project.

DOT National Transportation Integrated Search

2013-06-01

This System Design document for the US-75 Integrated Corridor Management (ICM) Program has been developed as part of the US Department of Transportation Integrated Corridor Management Initiative. The basic premise behind the ICM initiative is that in...

The effectiveness of service delivery initiatives at improving patients' waiting times in clinical radiology departments: a systematic review.

PubMed

Olisemeke, B; Chen, Y F; Hemming, K; Girling, A

2014-12-01

We reviewed the literature for the impact of service delivery initiatives (SDIs) on patients' waiting times within radiology departments. We searched MEDLINE, EMBASE, CINAHL, INSPEC and The Cochrane Library for relevant articles published between 1995 and February, 2013. The Cochrane EPOC risk of bias tool was used to assess the risk of bias on studies that met specified design criteria. Fifty-seven studies met the inclusion criteria. The types of SDI implemented included extended scope practice (ESP, three studies), quality management (12 studies), productivity-enhancing technologies (PETs, 29 studies), multiple interventions (11 studies), outsourcing and pay-for-performance (one study each). The uncontrolled pre- and post-intervention and the post-intervention designs were used in 54 (95%) of the studies. The reporting quality was poor: many of the studies did not test and/or report the statistical significance of their results. The studies were highly heterogeneous, therefore meta-analysis was inappropriate. The following type of SDIs showed promising results: extended scope practice; quality management methodologies including Six Sigma, Lean methodology, and continuous quality improvement; productivity-enhancing technologies including speech recognition reporting, teleradiology and computerised physician order entry systems. We have suggested improved study design and the mapping of the definitions of patient waiting times in radiology to generic timelines as a starting point for moving towards a situation where it becomes less restrictive to compare and/or pool the results of future studies in a meta-analysis.

The Potential of Adaptive Design in Animal Studies.

PubMed

Majid, Arshad; Bae, Ok-Nam; Redgrave, Jessica; Teare, Dawn; Ali, Ali; Zemke, Daniel

2015-10-12

Clinical trials are the backbone of medical research, and are often the last step in the development of new therapies for use in patients. Prior to human testing, however, preclinical studies using animal subjects are usually performed in order to provide initial data on the safety and effectiveness of prospective treatments. These studies can be costly and time consuming, and may also raise concerns about the ethical treatment of animals when potentially harmful procedures are involved. Adaptive design is a process by which the methods used in a study may be altered while it is being conducted in response to preliminary data or other new information. Adaptive design has been shown to be useful in reducing the time and costs associated with clinical trials, and may provide similar benefits in preclinical animal studies. The purpose of this review is to summarize various aspects of adaptive design and evaluate its potential for use in preclinical research.

The Potential of Adaptive Design in Animal Studies

PubMed Central

Majid, Arshad; Bae, Ok-Nam; Redgrave, Jessica; Teare, Dawn; Ali, Ali; Zemke, Daniel

2015-01-01

Clinical trials are the backbone of medical research, and are often the last step in the development of new therapies for use in patients. Prior to human testing, however, preclinical studies using animal subjects are usually performed in order to provide initial data on the safety and effectiveness of prospective treatments. These studies can be costly and time consuming, and may also raise concerns about the ethical treatment of animals when potentially harmful procedures are involved. Adaptive design is a process by which the methods used in a study may be altered while it is being conducted in response to preliminary data or other new information. Adaptive design has been shown to be useful in reducing the time and costs associated with clinical trials, and may provide similar benefits in preclinical animal studies. The purpose of this review is to summarize various aspects of adaptive design and evaluate its potential for use in preclinical research. PMID:26473839

The SUSTAIN Project: A European Study on Improving Integrated Care for Older People Living at Home

PubMed Central

Stoop, Annerieke; Billings, Jenny; Leichsenring, Kai; Ruppe, Georg; Tram, Nhu; Barbaglia, María Gabriela; Ambugo, Eliva A.; Zonneveld, Nick; Paat-Ahi, Gerli; Hoffmann, Henrik; Khan, Usman; Stein, Viktoria; Wistow, Gerald; Lette, Manon; Jansen, Aaltje P.D.; Nijpels, Giel; Baan, Caroline A.

2018-01-01

Introduction: Integrated care programmes are increasingly being put in place to provide care to older people who live at home. Knowledge of how to further develop integrated care and how to transfer successful initiatives to other contexts is still limited. Therefore, a cross-European research project, called Sustainable Tailored Integrated Care for Older People in Europe (SUSTAIN), has been initiated with a twofold objective: 1. to collaborate with local stakeholders to support and monitor improvements to established integrated care initiatives for older people with multiple health and social care needs. Improvements focus on person-centredness, prevention orientation, safety and efficiency; 2. to make these improvements applicable and adaptable to other health and social care systems, and regions in Europe. This paper presents the overall structure and approach of the SUSTAIN project. Methods: SUSTAIN uses a multiple embedded case study design. In three phases, SUSTAIN partners: (i) conduct interviews and workshops with stakeholders from fourteen established integrated care initiatives to understand where they would prefer improvements to existing ways of working; (ii) collaborate with local stakeholders to support the design and implementation of improvement plans, evaluate implementation progress and outcomes per initiative, and carry out overarching analyses to compare the different initiatives, and; (iii) translate knowledge and experience to an online roadmap. Discussion: SUSTAIN aims to generate evidence on how to improve integrated care, and apply and transfer the knowledge gained to other health and social care systems, and regions. Lessons learned will be brought together in practical tools to inform and support policy-makers and decision-makers, as well as other stakeholders involved in integrated care, to manage and improve care for older people living at home. PMID:29632456

Factors Associated with Teacher Delivery of a Classroom-Based Tier 2 Prevention Program.

PubMed

Sutherland, Kevin S; Conroy, Maureen A; McLeod, Bryce D; Algina, James; Kunemund, Rachel L

2018-02-01

Teachers sometimes struggle to deliver evidence-based programs designed to prevent and ameliorate chronic problem behaviors of young children with integrity. Identifying factors associated with variations in the quantity and quality of delivery is thus an important goal for the field. This study investigated factors associated with teacher treatment integrity of BEST in CLASS, a tier-2 prevention program designed for young children at risk for developing emotional/behavioral disorders. Ninety-two early childhood teachers and 231 young children at-risk for emotional/behavioral disorders participated in the study. Latent growth curve analyses indicated that both adherence and competence of delivery increased across six observed time points. Results suggest that teacher education and initial levels of classroom quality may be important factors to consider when teachers deliver tier-2 (i.e., targeted to children who are not responsive to universal or tier-1 programming) prevention programs in early childhood settings. Teachers with higher levels of education delivered the program with more adherence and competence initially. Teachers with higher initial scores on the Emotional Support subscale of the Classroom Assessment Scoring System (CLASS) delivered the program with more competence initially and exhibited higher growth in both adherence and competence of delivery across time. Teachers with higher initial scores on the Classroom Organization subscale of the CLASS exhibited lower growth in adherence across time. Contrary to hypotheses, teacher self-efficacy did not predict adherence, and teachers who reported higher initial levels of Student Engagement self-efficacy exhibited lower growth in competence of delivery. Results are discussed in relation to teacher delivery of evidence-based programs in early childhood classrooms.

38 CFR 20.1500 - Rule 1500. Expedited Claims Adjudication Initiative.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Claims Adjudication Initiative. 20.1500 Section 20.1500 Pensions, Bonuses, and Veterans' Relief... Adjudication Initiative-Pilot Program § 20.1500 Rule 1500. Expedited Claims Adjudication Initiative. (a) Purpose. The Expedited Claims Adjudication Initiative is a pilot program designed to streamline the claims...

School-Based Peer Mentoring in High School: A Program Evaluation Study

ERIC Educational Resources Information Center

Cooper, Felicia Cecile

2017-01-01

The dissertation is an initial investigation of a peer mentoring program in a suburban high school in the southeastern United States. Additionally, the Peer Mentoring Program (PMP) study examined whether the Program improves academic performance and attendance, and decreases referrals. Utilizing an experimental design, a Participant and a…

The Role of Flushing Dental Waterlines for the Removal of Microbial Contaminants - MCEARD

EPA Science Inventory

Objectives. This study was designed to determine the role of flushing dental water lines for the removal of heterotrophic plate count bacteria, Legionella spp., and free-living protozoa. Methods. Forty dental offices were surveyed in the study. An initial sample and a sample tak...

Evaluating a Tacit Knowledge Sharing Initiative: A Case Study

ERIC Educational Resources Information Center

Gubbins, Claire; Corrigan, Siobhan; Garavan, Thomas N.; O'Connor, Christy; Leahy, Damien; Long, David; Murphy, Eamonn

2012-01-01

Purpose: This paper aims to present a case study illustrating the issues involved in the tacit knowledge conversion process and to determine whether such conversion delivers value to the organisation in terms of business value and return on investment (ROI). Design/methodology/approach: A single-case multiple baseline participants experimental…

The Edison Environmental Center Permeable Pavement Site: Initial Results from a Stormwater Control Designed for Monitoring - Paper

EPA Science Inventory

There exist few detailed studies of full-scale, replicated, actively-used permeable pavement systems. Practitioners need additional studies of permeable pavement systems in its intended application (parking lot, roadway, etc.) across a range of climatic events, daily usage condit...

The Edison Environmental Center Permeable Pavement Site: Initial Results from a Stormwater Control Designed for Monitoring - Slides

EPA Science Inventory

There exist few detailed studies of full-scale, replicated, actively-used permeable pavement systems. Practitioners need additional studies of permeable pavement systems in its intended application (parking lot, roadway, etc.) across a range of climatic events, daily usage condit...

USE OF A VACUUM FILTRATION TECHNIQUE TO STUDY LEACHING OF INDIGENOUS VIRUSES FROM RAW WASTEWATER SLUDGE

EPA Science Inventory

The relative efficiencies of a buffered beef extract solution, sewage secondary effluent, and distilled water, were compared in a study designed to simulate leaching of indigenous enteric viruses from raw primary sewage sludge. The initial sludge liquid fractions, termed sludge l...

Organizational Commitment, Knowledge Management Interventions, and Learning Organization Capacity

ERIC Educational Resources Information Center

Massingham, Peter; Diment, Kieren

2009-01-01

Purpose: The purpose of this paper is to examine the relationship between organizational commitment and knowledge management initiatives in developing learning organization capacity (LOC). Design/methodology/approach: This is an empirical study based on a single case study, using partial least squares (PLS) analysis. Findings: The strategic…

Longitudinal Intergenerational Birth Cohort Designs: A Systematic Review of Australian and New Zealand Studies

PubMed Central

Townsend, Michelle L.; Riepsamen, Angelique; Georgiou, Christos; Flood, Victoria M.; Caputi, Peter; Wright, Ian M.; Davis, Warren S.; Jones, Alison; Larkin, Theresa A.; Williamson, Moira J.; Grenyer, Brin F. S.

2016-01-01

Background The longitudinal birth cohort design has yielded a substantial contribution to knowledge of child health and development. The last full review in New Zealand and Australia in 2004 identified 13 studies. Since then, birth cohort designs continue to be an important tool in understanding how intrauterine, infant and childhood development affect long-term health and well-being. This updated review in a defined geographical area was conducted to better understand the factors associated with successful quality and productivity, and greater scientific and policy contribution and scope. Methods We adopted the preferred reporting items for systematic reviews and meta-analyses (PRISMA) approach, searching PubMed, Scopus, Cinahl, Medline, Science Direct and ProQuest between 1963 and 2013. Experts were consulted regarding further studies. Five inclusion criteria were used: (1) have longitudinally tracked a birth cohort, (2) have collected data on the child and at least one parent or caregiver (3) be based in Australia or New Zealand, (4) be empirical in design, and (5) have been published in English. Results 10665 records were initially retrieved from which 23 birth cohort studies met the selection criteria. Together these studies recruited 91,196 participants, with 38,600 mothers, 14,206 fathers and 38,390 live births. Seventeen studies were located in Australia and six in New Zealand. Research questions initially focused on the perinatal period, but as studies matured, longer-term effects and outcomes were examined. Conclusions This review demonstrates the significant yield from this effort both in terms of scientific discovery and social policy impact. Further opportunities have been recognised with cross-study collaboration and pooling of data between established and newer studies and international studies to investigate global health determinants. PMID:26991330

Design definition of a microwave power reception and conversion system for use on a high altitude powered platform

NASA Technical Reports Server (NTRS)

Brown, W. C.

1981-01-01

The design definition of a microwave power reception and conversion system for use on high altitude powered platform is presented. The study includes an initial design, construction and test effort on a thin film, printed circuit rectenna. A study of a low altitude demonstration of an airborne rectenna was made starting with the assumption that a fifty foot mechanically steerable parabolic reflector at the Wallops Flight Center would be retrofitted with a low microwave power source consisting of a five kilowatt commercially available magnetron and that a small blimp would be used to support the rectenna.

Analysis and design of the Multimission Modular Spacecraft hydrazine propulsion module

NASA Technical Reports Server (NTRS)

Etheridge, F. G.; Woodruff, W. L.

1978-01-01

The translational velocity increment, stabilization and control requirements, vehicle weight, and geometric considerations of the Multimission Modular Spacecraft (MMS) provided the basic data on which to initiate the analysis and design of the hydrazine propulsion modules. The Landsat D was used as the mission model. Tradeoff studies were conducted on thrust level, thruster location, and clustering arrangement together with tankage volume and location. The impact of the use of single and dual seat thruster valves on plumbing configuration, reliability, and overall system cost was studied in detail. Conceptual designs of a recommended propulsion module configuration for both the Delta 3910 and Shuttle were prepared.

Improving Initiation and Tracking of Research Projects at an Academic Health Center: A Case Study.

PubMed

Schmidt, Susanne; Goros, Martin; Parsons, Helen M; Saygin, Can; Wan, Hung-Da; Shireman, Paula K; Gelfond, Jonathan A L

2017-09-01

Research service cores at academic health centers are important in driving translational advancements. Specifically, biostatistics and research design units provide services and training in data analytics, biostatistics, and study design. However, the increasing demand and complexity of assigning appropriate personnel to time-sensitive projects strains existing resources, potentially decreasing productivity and increasing costs. Improving processes for project initiation, assigning appropriate personnel, and tracking time-sensitive projects can eliminate bottlenecks and utilize resources more efficiently. In this case study, we describe our application of lean six sigma principles to our biostatistics unit to establish a systematic continual process improvement cycle for intake, allocation, and tracking of research design and data analysis projects. The define, measure, analyze, improve, and control methodology was used to guide the process improvement. Our goal was to assess and improve the efficiency and effectiveness of operations by objectively measuring outcomes, automating processes, and reducing bottlenecks. As a result, we developed a web-based dashboard application to capture, track, categorize, streamline, and automate project flow. Our workflow system resulted in improved transparency, efficiency, and workload allocation. Using the dashboard application, we reduced the average study intake time from 18 to 6 days, a 66.7% reduction over 12 months (January to December 2015).

Teleophthalmology in Practice: Lessons Learned from a Pilot Project

PubMed Central

Ayatollahi, Haleh; Nourani, Aynaz; Khodaveisi, Taleb; Aghaei, Hossein; Mohammadpour, Mehrdad

2017-01-01

Introduction: Ophthalmology is a medical specialty which may benefit from using telemedicine and teleophthalmology services. Such services are significantly important in the poor, remote, and impassable geographical areas, where there is no access to the ophthalmology services and ophthalmologists. This study aimed to design and implement a teleophthalmology system using the method of store-and-forward. Methods: The study was conducted in 2015 and consisted of two main phases. The first phase was based requirement analysis, and in the second phase, after designing the prototype, an initial usability testing was undertaken in a teaching hospital. The participants of the study were 10 optometrists and 10 ophthalmologists (cornea specialists). For each phase of the research, a questionnaire was used to collect data, and the collected data were analyzed using descriptive statistics. Results: In this study, users’ requirements were initially investigated. Then, the teleophthalmology system was designed based on the literature review and the results derived from the requirements’ analysis. Finally, usability testing showed that the users were relatively satisfied with the system. Conclusion: According to the results, it can be concluded that the teleophthalmology technology can be used in the country by optometrists and ophthalmologists to improve eye health care services and to prevent the prevalence of curable eye diseases. PMID:29081869

Mapping telemedicine efforts: surveying regional initiatives in Denmark.

PubMed

Kierkegaard, Patrick

2015-05-01

The aim of this study is to survey telemedicine services currently in operation across Denmark. The study specifically seeks to answer the following questions: What initiatives are deployed within the different regions? What are the motivations behind the projects? What technologies are being utilized? What medical disciplines are being supported using telemedicine systems? All data were surveyed from the Telemedicinsk Landkort, a newly created database designed to provide a comprehensive and systematic overview of all telemedicine technologies in Denmark. The results of this study suggest that a growing numbers of telemedicine initiatives are currently in operation across Denmark but that considerable variations exist in terms of regional efforts as the number of operational telemedicine projects varied from region to region. The results of this study provide a timely picture of the factors that are shaping the telemedicine landscape of Denmark and suggest potential strategies to help policymakers increase and improve national telemedicine deployment.

Space shuttle orbiter leading-edge flight performance compared to design goals

NASA Technical Reports Server (NTRS)

Curry, D. M.; Johnson, D. W.; Kelly, R. E.

1983-01-01

Thermo-structural performance of the Space Shuttle orbiter Columbia's leading-edge structural subsystem for the first five (5) flights is compared with the design goals. Lessons learned from thse initial flights of the first reusable manned spacecraft are discussed in order to assess design maturity, deficiencies, and modifications required to rectify the design deficiencies. Flight data and post-flight inspections support the conclusion that the leading-edge structural subsystem hardware performance was outstanding for the initial five (5) flights.

Clinical trial quality: From supervision to collaboration and beyond.

PubMed

Meeker-O'Connell, Ann; Glessner, Coleen

2018-02-01

Over the past decade, clinical trial quality has evolved from an after-the-fact, reactive activity to one focused on the important work of evidence generation from well-designed trials. This article explores the role the Clinical Trials Transformation Initiative has played in advancing quality as a core element of clinical trial design, through project work that initially focused on monitoring but evolved into a holistic, prospective, and comprehensive quality by design approach to clinical trial design and conduct.

A fully covered self-expandable metal stent with antimigration features for benign biliary strictures: a prospective, multicenter cohort study.

PubMed

Walter, Daisy; Laleman, Wim; Jansen, Jeroen M; van Milligen de Wit, A W M; Weusten, Bas L; van Boeckel, Petra G; Hirdes, Meike M; Vleggaar, Frank P; Siersema, Peter D

2015-05-01

Self-expandable metal stents (SEMSs) are increasingly used for the treatment of benign biliary strictures (BBSs). A new fully covered SEMS (FCSEMS) with flared ends and high conformability was designed to prevent migration of the stent. To evaluate the efficacy of a novel FCSEMS with antimigration features. Prospective cohort study. Five hospitals in the Netherlands and Belgium. Consecutive patients with BBS. FCSEMS placement for 3 months. Initial and long term clinical success, stent migration rate and safety. Thirty-eight patients (24 men; mean age, 53 ± 16 years) were included. Stent placement was technically successful in 37 patients (97%). Two patients died of an unrelated cause before stent removal, and no data on these patients were available on stricture resolution. Initial clinical success was achieved in 28 of 35 patients (80%). During follow-up after stent removal, a symptomatic recurrent stricture developed in 6 of 28 patients (21%). Overall, the long-term clinical success rate was 63% (22 of 35 patients). Stent migration occurred in 11 of 35 patients (31%), including 5 symptomatic (14%) and 6 asymptomatic (17%) migrations. In total, 11 serious adverse events occurred in 10 patients (29%), with cholangitis (n = 5) being most common. Nonrandomized study design. Good initial clinical success was achieved after placement of this novel FCSEMS, but stricture recurrence was in the upper range compared with other FCSEMSs. The antimigration design could not prevent migration in a significant number of patients with a persisting stricture. Copyright © 2015 American Society for Gastrointestinal Endoscopy. Published by Elsevier Inc. All rights reserved.

Status of the assessment phase of the ESA M3 mission candidate LOFT

NASA Astrophysics Data System (ADS)

Corral van Damme, Carlos; Ayre, Mark; Lumb, David; Short, Alexander D.; Rando, Nicola

2012-09-01

LOFT (Large Observatory For x-ray Timing) is one of four candidates for the M3 slot (launch in 2024, with the option of a launch in 2022) of ESAs Cosmic Vision 2015 - 2025 Plan, and as such it is currently undergoing an initial assessment phase lasting one year. The objective of the assessment phase is to provide the information required to enable the down selection process, in particular: the space segment definition for meeting the assigned science objectives; consideration of and initial definition of the implementation schedule; an estimate of the mission Cost at Completion (CaC); an evaluation of the technology readiness evaluation and risk assessment. The assessment phase is divided into two interleaved components: (i) A payload assessment study, performed by teams funded by member states, which is primarily intended for design, definition and programmatic/cost evaluation of the payload, and (ii) A system industrial study, which has essentially the same objectives for the space segment of the mission. This paper provides an overview of the status of the LOFT assessment phase, both for payload and platform. The initial focus is on the payload design status, providing the reader with an understanding of the main features of the design. Then the space segment assessment study status is presented, with an overview of the principal challenges presented by the LOFT payload and mission requirements, and a presentation of the expected solutions. Overall the mission is expected to enable cutting-edge science, is technically feasible, and should remain within the required CaC for an M3 candidate.

A study to define an in-flight dynamics measurement and data applications program for space shuttle payloads

NASA Technical Reports Server (NTRS)

Rader, W. P.; Barrett, S.; Payne, K. R.

1975-01-01

Data measurement and interpretation techniques were defined for application to the first few space shuttle flights, so that the dynamic environment could be sufficiently well established to be used to reduce the cost of future payloads through more efficient design and environmental test techniques. It was concluded that: (1) initial payloads must be given comprehensive instrumentation coverage to obtain detailed definition of acoustics, vibration, and interface loads, (2) analytical models of selected initial payloads must be developed and verified by modal surveys and flight measurements, (3) acoustic tests should be performed on initial payloads to establish realistic test criteria for components and experiments in order to minimize unrealistic failures and retest requirements, (4) permanent data banks should be set up to establish statistical confidence in the data to be used, (5) a more unified design/test specification philosophy is needed, (6) additional work is needed to establish a practical testing technique for simulation of vehicle transients.

Delivering successful randomized controlled trials in surgery: Methods to optimize collaboration and study design.

PubMed

Blencowe, Natalie S; Cook, Jonathan A; Pinkney, Thomas; Rogers, Chris; Reeves, Barnaby C; Blazeby, Jane M

2017-04-01

Randomized controlled trials in surgery are notoriously difficult to design and conduct due to numerous methodological and cultural challenges. Over the last 5 years, several UK-based surgical trial-related initiatives have been funded to address these issues. These include the development of Surgical Trials Centers and Surgical Specialty Leads (individual surgeons responsible for championing randomized controlled trials in their specialist fields), both funded by the Royal College of Surgeons of England; networks of research-active surgeons in training; and investment in methodological research relating to surgical randomized controlled trials (to address issues such as recruitment, blinding, and the selection and standardization of interventions). This article discusses these initiatives more in detail and provides exemplar cases to illustrate how the methodological challenges have been tackled. The initiatives have surpassed expectations, resulting in a renaissance in surgical research throughout the United Kingdom, such that the number of patients entering surgical randomized controlled trials has doubled.

Mission and system optimization of nuclear electric propulsion vehicles for lunar and Mars missions

NASA Technical Reports Server (NTRS)

Gilland, James H.

1991-01-01

The detailed mission and system optimization of low thrust electric propulsion missions is a complex, iterative process involving interaction between orbital mechanics and system performance. Through the use of appropriate approximations, initial system optimization and analysis can be performed for a range of missions. The intent of these calculations is to provide system and mission designers with simple methods to assess system design without requiring access or detailed knowledge of numerical calculus of variations optimizations codes and methods. Approximations for the mission/system optimization of Earth orbital transfer and Mars mission have been derived. Analyses include the variation of thruster efficiency with specific impulse. Optimum specific impulse, payload fraction, and power/payload ratios are calculated. The accuracy of these methods is tested and found to be reasonable for initial scoping studies. Results of optimization for Space Exploration Initiative lunar cargo and Mars missions are presented for a range of power system and thruster options.

EDIN design study alternate space shuttle booster replacement concepts. Volume 2: Design simulation results

NASA Technical Reports Server (NTRS)

Demakes, P. T.; Hirsch, G. N.; Stewart, W. A.; Glatt, C. R.

1976-01-01

Historical weight estimating relationships were developed for the liquid rocket booster (LRB) using Saturn technology, and modified as required to support the EDIN05 study. Mission performance was computed using February 1975 shuttle configuration groundrules to allow reasonable comparison of the existing shuttle with the EDIN05 designs. The launch trajectory was constrained to pass through both the RTLS/AOA and main engine cut-off points. Performance analysis was based on a point design trajectory model which optimized initial tilt rate and exo-atmospheric pitch profile. A gravity turn was employed during the boost phase in place of the shuttle angle-of-attack profile. Engine throttling add/or shutdown was used to constrain dynamic pressure and/or longitudinal acceleration where necessary.

A design procedure for a tension-wire stiffened truss-column

NASA Technical Reports Server (NTRS)

Greene, W. H.

1980-01-01

A deployable, tension wire stiffened, truss column configuration was considered for space structure applications. An analytical procedure, developed for design of the truss column and exercised in numerical studies, was based on equivalent beam stiffness coefficients in the classical analysis for an initially imperfect beam column. Failure constraints were formulated to be used in a combined weight/strength and nonlinear mathematical programming automated design procedure to determine the minimum mass column for a particular combination of design load and length. Numerical studies gave the mass characteristics of the truss column for broad ranges of load and length. Comparisons of the truss column with a baseline tubular column used a special structural efficiency parameter for this class of columns.

EPA Finalizes Initial Area Designations for the 2012 National Air Quality Standard for Fine Particles - Dec 2014

EPA Pesticide Factsheets

After considering state and tribal recommendations, reviewing the most recent certified fine particle air quality data, and emissions that contribute fine particle pollution, EPA has completed initial designations for the 2012 annual fine particle standard

Modular space station phase B extension preliminary performance specification. Volume 1: Initial station systems

NASA Technical Reports Server (NTRS)

1971-01-01

The general, operational, design/construction, and subsystem design requirements are presented for a solar powered modular space station system. While these requirements apply only to the initial station system, the system is readily adaptable to a growth configuration.

Optimization in the systems engineering process

NASA Technical Reports Server (NTRS)

Lemmerman, Loren A.

1993-01-01

The essential elements of the design process consist of the mission definition phase that provides the system requirements, the conceptual design, the preliminary design and finally the detailed design. Mission definition is performed largely by operations analysts in conjunction with the customer. The result of their study is handed off to the systems engineers for documentation as the systems requirements. The document that provides these requirements is the basis for the further design work of the design engineers at the Lockheed-Georgia Company. The design phase actually begins with conceptual design, which is generally conducted by a small group of engineers using multidisciplinary design programs. Because of the complexity of the design problem, the analyses are relatively simple and generally dependent on parametric analyses of the configuration. The result of this phase is a baseline configuration from which preliminary design may be initiated.

Collision Avoidance for Airport Traffic Concept Evaluation

NASA Technical Reports Server (NTRS)

Jones, Denise R.; Prinzel, Lawrence J., III; Otero, Sharon D.; Barker, Glover D.

2009-01-01

An initial Collision Avoidance for Airport Traffic (CAAT) concept for the Terminal Maneuvering Area (TMA) was evaluated in a simulation study at the National Aeronautics and Space Administration (NASA) Langley Research Center. CAAT is being designed to enhance surface situation awareness and provide cockpit alerts of potential conflicts during runway, taxi, and low altitude air-to-air operations. The purpose of the study was to evaluate the initial concept for an aircraft-based method of conflict detection and resolution (CD&R) in the TMA focusing on conflict detection algorithms and alerting display concepts. This paper gives an overview of the CD&R concept, simulation study, and test results.