The Influence of a Word's Number of Letters, Spatial Extent, and Initial Bigram Characteristics on Eye Movement Control during Reading: Evidence from Arabic

ERIC Educational Resources Information Center

Hermena, Ehab W.; Liversedge, Simon P.; Drieghe, Denis

2017-01-01

The authors conducted 2 eye movement experiments in which they used the typographical and linguistic properties of Arabic to disentangle the influences of words' number of letters and spatial extent on measures of fixation duration and saccade targeting (Experiment 1), and to investigate the influence of initial bigram characteristics on saccade…

Exploring Career Agency during Self-Initiated Repatriation: A Study of Chinese Sea Turtles

ERIC Educational Resources Information Center

Guo, Chun; Porschitz, Emily T.; Alves, Jose

2013-01-01

Purpose: Drawing on career and self-initiated expatriation/repatriation literatures, this paper aims to examine the career experiences of Chinese self-initiated repatriates after their return to China. Design/methodology/approach: The authors conducted an exploratory, qualitative study involving in-depth interviews with 20 Chinese individuals who…

Perceptions of the Physical Education Doctoral Experience: Does Previous Teaching Experience Matter?

ERIC Educational Resources Information Center

Richards, K. Andrew R.; McLoughlin, Gabriella M.; Gaudreault, Karen Lux; Shiver, Victoria Nicole

2018-01-01

In the United States, physical education doctoral programs place great stock in recruiting students who have prior in-service teaching experience. However, little is known about how this experience influences perceptions of doctoral education. We conducted this cross-sectional, exploratory study to develop an initial understanding of how prior…

BIODEGRADABILITY OF DISPERSED CRUDE OIL AT TWO DIFFERENT TEMPERATURES

EPA Science Inventory

Laboratory experiments were initiated to study the biodegradability of oil after dispersants were applied. Two experiments were conducted, one at 20 ^oC and the other at 5 ^oC. In both experiments, only the dispersed oil fraction was investigated. Each exper...

BIODEGRADABILITY OF DISPERSED CRUDE OIL AT TWO DIFFERENT TEMPERATURES

EPA Science Inventory

Laboratory experiments were initiated to study the biodegradability of crude oil after dispersants were applied. Two experiments were conducted, one at 20^oC and the other at 5^oC. In both experiments, only the dispersed oil fraction was investigated compared ...

An experimental study of geyser-like flows induced by a pressurized air pocket

NASA Astrophysics Data System (ADS)

Elayeb, I. S.; Leon, A.; Choi, Y.; Alnahit, A. O.

2015-12-01

Previous studies argues that the entrapment of pressurized air pockets within combined sewer systems can produce geyser flows, which is an oscillating jetting of a mixture of gas-liquid flows. To verify that pressurized air pockets can effectively produce geysers, laboratory experiments were conducted. However, past experiments were conducted in relatively small-scale apparatus (i.e. maximum φ2" vertical shaft). This study conducted a set of experiments in a larger apparatus. The experimental setup consists of an upstream head tank, a downstream head tank, a horizontal pipe (46.5ft long, φ6") and a vertical pipe (10ft long, φ6"). The initial condition for the experiments is constant flow discharge through the horizontal pipe. The experiments are initiated by injecting an air pocket with pre-determined volume and pressure at the upstream end of the horizontal pipe. The air pocket propagates through the horizontal pipe until it arrives to the vertical shaft, where it is released producing a geyser-like flow. Three flow rates in the horizontal pipe and three injected air pressures were tested. The variables measured were pressure at two locations in the horizontal pipe and two locations in the vertical pipe. High resolution videos at two regions in the vertical shaft were also recorded. To gain further insights in the physics of air-water interaction, the laboratory experiments were complemented with numerical simulations conducted using a commercial 3D CFD model, previously validated with experiments.

Pore Formation and Mobility Investigation (PFMI): Concept, Hardware Development, and Initial Analysis of Experiments Conducted Aboard the International Space Station

NASA Technical Reports Server (NTRS)

Grugel, Richard N.

2003-01-01

Porosity in the form of "bubbles and pipes" can occur during controlled directional solidification processing of metal alloys. This is a consequence that 1) precludes obtaining any meaningful scientific results and 2) is detrimental to desired material properties. Unfortunately, several Microgravity experiments have been compromised by porosity. The intent of the PFMl investigation is to conduct a systematic effort directed towards understanding porosity formation and mobility during controlled directional solidification (DS) in a microgravity environment. PFMl uses a pure transparent material, succinonitrile (SCN), as well as SCN "alloyed" with water, in conjunction with a translating temperature gradient stage so that direct observation and recording of pore generation and mobility can be made. PFMl is investigating the role of thermocapillary forces and temperature gradients in affecting bubble dynamics as well as other solidification processes in a microgravity environment. This presentation will cover the concept, hardware development, operations, and the initial results from experiments conducted aboard the International Space Station.

Discovering Diversity Downtown: Questioning Phoenix

ERIC Educational Resources Information Center

Talmage, Craig A.; Dombrowski, Rosemarie; Pstross, Mikulas; Peterson, C. Bjørn; Knopf, Richard C.

2015-01-01

Applied community learning experiences for university students are promising endeavors in downtown urban environments. Past research is applied to help better comprehend a community engagement initiative conducted in downtown Phoenix, Arizona. The initiative aimed to illuminate the socio-cultural diversity of the downtown area utilizing…

Child-Friendly School Initiative in Jordan: A Sharing Experience

ERIC Educational Resources Information Center

Weshah, Hani A.; Al-Faori, Oraib; Sakal, Reham M.

2012-01-01

The purpose of this research was to report on a Child-Friendly School (CFS) initiative pilot project in Jordan, which aims at initiating the creation of CFS and to raise stakeholders' awareness of the importance of this project in promoting and implementing Child Rights Conviction (CRC) in Jordan. The study was conducted by a joint team selected…

Evaporative Mass Transfer Behavior of a Complex Immiscible Liquid

PubMed Central

McColl, Colleen M.; Johnson, Gwynn R.; Brusseau, Mark L.

2010-01-01

A series of laboratory experiments was conducted with a multiple-component immiscible liquid, collected from the Picillo Farm Superfund Site in Rhode Island, to examine liquid-vapor mass-transfer behavior. The immiscible liquid, which comprises solvents, oils, pesticides, PCBs, paint sludges, explosives, and other compounds, was characterized using gas chromatography and gas chromatography/mass spectrometry to determine mole fractions of selected constituents. Batch experiments were conducted to evaluate equilibrium phase-partitioning behavior. Two sets of air-stripping column studies were conducted to examine the mass-transfer dynamics of five selected target compounds present in the immiscible-liquid mixture. One set of column experiments was designed to represent a system with free-phase immiscible liquid present; the other was designed to represent a system with a residual phase of immiscible liquid. Initial elution behavior of all target components generally appeared to be ideal for both systems, as the initial vapor-phase concentrations were similar to vapor-phase concentrations measured for the batch experiment and those estimated using Raoult’s law (incorporating the immiscible-liquid composition data). Later-stage removal of 1,2-dichlorobenzene appeared to be rate limited for the columns containing free-phase immiscible liquid and no porous medium. Conversely, evaporative mass transfer appeared to be ideal throughout the experiment conducted with immiscible liquid distributed relatively uniformly as a residual phase within a sandy porous medium. PMID:18614196

Evaporative mass transfer behavior of a complex immiscible liquid.

PubMed

McColl, Colleen M; Johnson, Gwynn R; Brusseau, Mark L

2008-09-01

A series of laboratory experiments was conducted with a multiple-component immiscible liquid, collected from the Picillo Farm Superfund Site in Rhode Island, to examine liquid-vapor mass-transfer behavior. The immiscible liquid, which comprises solvents, oils, pesticides, PCBs, paint sludges, explosives, and other compounds, was characterized using gas chromatography and gas chromatography/mass spectrometry to determine mole fractions of selected constituents. Batch experiments were conducted to evaluate equilibrium phase-partitioning behavior. Two sets of air-stripping column studies were conducted to examine the mass-transfer dynamics of five selected target compounds present in the immiscible-liquid mixture. One set of column experiments was designed to represent a system with free-phase immiscible liquid present; the other was designed to represent a system with a residual phase of immiscible liquid. Initial elution behavior of all target components generally appeared to be ideal for both systems, as the initial vapor-phase concentrations were similar to vapor-phase concentrations measured for the batch experiment and those estimated using Raoult's law (incorporating the immiscible-liquid composition data). Later-stage removal of 1,2-dichlorobenzene appeared to be rate limited for the columns containing free-phase immiscible liquid and no porous medium. Conversely, evaporative mass transfer appeared to be ideal throughout the experiment conducted with immiscible liquid distributed relatively uniformly as a residual phase within a sandy porous medium.

New experiments on the effect of clock shifts on homing in pigeons

NASA Technical Reports Server (NTRS)

Schmidt-Koenig, K.

1972-01-01

The effect of clock shifts as an experimental tool for predictably interfering with the homing ability of birds is discussed. Clock shifts introduce specific errors in the birds' sun azimuth compass, resulting in corresponding errors during initial orientation and possibly during orientation enroute. The effects of 6 hour and 12 hour clock shifts resulted in a 90 degree deviation and a 180 degree deviation from the initial orientation, respectively. The method for conducting the clock shift experiments and results obtained from previous experiments are described.

Student Teachers' Reflections on Prior Experiences of Learning Geography

ERIC Educational Resources Information Center

Dolan, Anne M.; Waldron, Fionnuala; Pike, Susan; Greenwood, Richard

2014-01-01

Primary geography education is an important part of initial teacher education. The importance of prior experiences in the development of student teachers has long been recognised and there is growing evidence of the nature of those experiences in areas such as geography. This paper reports the findings of research conducted with one cohort of…

Initial Retrieval Validation from the Joint Airborne IASI Validation Experiment (JAIVEx)

NASA Technical Reports Server (NTRS)

Zhou, Daniel K.; Liu, Xu; Smith, WIlliam L.; Larar, Allen M.; Taylor, Jonathan P.; Revercomb, Henry E.; Mango, Stephen A.; Schluessel, Peter; Calbet, Xavier

2007-01-01

The Joint Airborne IASI Validation Experiment (JAIVEx) was conducted during April 2007 mainly for validation of the Infrared Atmospheric Sounding Interferometer (IASI) on the MetOp satellite, but also included a strong component focusing on validation of the Atmospheric InfraRed Sounder (AIRS) aboard the AQUA satellite. The cross validation of IASI and AIRS is important for the joint use of their data in the global Numerical Weather Prediction process. Initial inter-comparisons of geophysical products have been conducted from different aspects, such as using different measurements from airborne ultraspectral Fourier transform spectrometers (specifically, the NPOESS Airborne Sounder Testbed Interferometer (NAST-I) and the Scanning-High resolution Interferometer Sounder (S-HIS) aboard the NASA WB-57 aircraft), UK Facility for Airborne Atmospheric Measurements (FAAM) BAe146-301 aircraft insitu instruments, dedicated dropsondes, radiosondes, and ground based Raman Lidar. An overview of the JAIVEx retrieval validation plan and some initial results of this field campaign are presented.

Style preference survey: a report on the psychometric properties and a cross-validation experiment.

PubMed

Smith, Sherri L; Ricketts, Todd; McArdle, Rachel A; Chisolm, Theresa H; Alexander, Genevieve; Bratt, Gene

2013-02-01

Several self-report measures exist that target different aspects of outcomes for hearing aid use. Currently, no comprehensive questionnaire specifically assesses factors that may be important for differentiating outcomes pertaining to hearing aid style. The goal of this work was to develop the Style Preference Survey (SPS), a questionnaire aimed at outcomes associated with hearing aid style differences. Two experiments were conducted. After initial item development, Experiment 1 was conducted to refine the items and to determine its psychometric properties. Experiment 2 was designed to cross-validate the findings from the initial experiment. An observational design was used in both experiments. Participants who wore traditional, custom-fitted (TC) or open-canal (OC) style hearing aids from 3 mo to 3 yr completed the initial experiment. One-hundred and eighty-four binaural hearing aid users (120 of whom wore TC hearing aids and 64 of whom wore OC hearing aids) participated. A new sample of TC and OC users (n = 185) participated in the cross-validation experiment. Currently available self-report measures were reviewed to identify items that might differentiate between hearing aid styles, particularly preference for OC versus TC hearing aid styles. A total of 15 items were selected and modified from available self-report measures. An additional 55 items were developed through consensus of six audiologists for the initial version of the SPS. In the first experiment, the initial SPS version was mailed to 550 veterans who met the inclusion criteria. A total of 184 completed the SPS. Approximately three weeks later, a subset of participants (n = 83) completed the SPS a second time. Basic analyses were conducted to evaluate the psychometric properties of the SPS including subscale structure, internal consistency, test-retest reliability, and responsiveness. Based on the results of Experiment 1, the SPS was revised. A cross-validation experiment was then conducted using the revised version of the SPS to confirm the subscale structure, internal consistency, and responsiveness of the questionnaire in a new sample of participants. The final factor analysis led to the ultimate version of the SPS, which had a total of 35 items encompassing five subscales: (1) Feedback, (2) Occlusion/Own Voice Effects, (3) Localization, (4) Fit, Comfort, and Cosmetics, and (5) Ease of Use. The internal consistency of the total SPS (Cronbach's α = .92) and of the subscales (each Cronbach's α > .75) was high. Intraclass correlations (ICCs) showed that the test-retest reliability of the total SPS (ICC = .93) and of the subscales (each ICC > .80) also was high. TC hearing aid users had significantly poorer outcomes than OC hearing aid users on 4 of the 5 subscales, suggesting that the SPS largely is responsive to factors related to style-specific differences. The results suggest that the SPS has good psychometric properties and is a valid and reliable measure of outcomes related to style-specific, hearing aid preference. American Academy of Audiology.

A Fundamental Study of Laser Beam Welding Aluminum-Lithium Alloy 2195 for Cryogenic Tank Applications

NASA Technical Reports Server (NTRS)

Martukanitz, R. P.; Jan. R.

1996-01-01

Based on the potential for decreasing costs of joining stiffeners to skin by laser beam welding, a fundamental research program was conducted to address the impediments identified during an initial study involving laser beam welding of aluminum-lithium alloys. Initial objectives of the program were the identification of governing mechanism responsible for process related porosity while establishing a multivariant relationship between process parameters and fusion zone geometry for laser beam welds of alloy 2195. A three-level fractional factorial experiment was conducted to establish quantitative relationships between primary laser beam processing parameters and critical weld attributes. Although process consistency appeared high for welds produced during partial completion of this study, numerous cracks on the top-surface of the welds were discovered during visual inspection and necessitated additional investigations concerning weld cracking. Two experiments were conducted to assess the effect of filler alloy additions on crack sensitivity: the first experiment was used to ascertain the effects of various filler alloys on cracking and the second experiment involved modification to process parameters for increasing filler metal dilution. Results indicated that filler alloys 4047 and 4145 showed promise for eliminating cracking.

Wikibooks and Wikibookians: Loosely Coupled Community or a Choice for Future Textbooks?

ERIC Educational Resources Information Center

Lin, Meng-Fen Grace; Sajjapanroj, Suthiporn; Bonk, Curtis J.

2011-01-01

This study was conducted to better understand Wikibookian apprenticeship and identity as well as the environment or community they operate in. Our initial study explored the basic demographics, purpose and goals, ownership, collaborative work experiences, successes and failures, and advantages and disadvantages of wikibooks. Those initial results…

Modifying mixing and instability growth through the adjustment of initial conditions in a high-energy-density counter-propagating shear experiment on OMEGA

DOE PAGES

Merritt, E. C.; Doss, F. W.; Loomis, E. N.; ...

2015-06-24

Counter-propagating shear experiments conducted at the OMEGA Laser Facility have been evaluating the effect of target initial conditions, specifically the characteristics of a tracer foil located at the shear boundary, on Kelvin-Helmholtz instability evolution and experiment transition toward nonlinearity and turbulence in the high-energy-density (HED) regime. Experiments are focused on both identifying and uncoupling the dependence of the model initial turbulent length scale in variable-density turbulence models of k-ϵ type on competing physical instability seed lengths as well as developing a path toward fully developed turbulent HED experiments. We present results from a series of experiments controllably and independently varyingmore » two initial types of scale lengths in the experiment: the thickness and surface roughness (surface perturbation scale spectrum) of a tracer layer at the shear interface. We show that decreasing the layer thickness and increasing the surface roughness both have the ability to increase the relative mixing in the system, and thus theoretically decrease the time required to begin transitioning to turbulence in the system. In addition, we also show that we can connect a change in observed mix width growth due to increased foil surface roughness to an analytically predicted change in model initial turbulent scale lengths.« less

Understanding the investigators: a qualitative study investigating the barriers and enablers to the implementation of local investigator-initiated clinical trials in Ethiopia

PubMed Central

Franzen, Samuel R P; Chandler, Clare; Enquselassie, Fikre; Siribaddana, Sisira; Atashili, Julius; Angus, Brian; Lang, Trudie

2013-01-01

Objectives Clinical trials provide ‘gold standard’ evidence for policy, but insufficient locally relevant trials are conducted in low-income and middle-income countries. Local investigator-initiated trials could generate highly relevant data for national governments, but information is lacking on how to facilitate them. We aimed to identify barriers and enablers to investigator-initiated trials in Ethiopia to inform and direct capacity strengthening initiatives. Design Exploratory, qualitative study comprising of in-depth interviews (n=7) and focus group discussions (n=3). Setting Fieldwork took place in Ethiopia during March 2011. Participants Local health researchers with previous experiences of clinical trials or stakeholders with an interest in trials were recruited through snowball sampling (n=20). Outcome measures Detailed discussion notes were analysed using thematic coding analysis and key themes were identified. Results All participants perceived investigator-initiated trials as important for generating local evidence. System and organisational barriers included: limited funding allocation, weak regulatory and administrative systems, few learning opportunities, limited human and material capacity and poor incentives for conducting research. Operational hurdles were symptomatic of these barriers. Lack of awareness, confidence and motivation to undertake trials were important individual barriers. Training, knowledge sharing and experience exchange were key enablers to trial conduct and collaboration was unanimously regarded as important for improving capacity. Conclusions Barriers to trial conduct were found at individual, operational, organisational and system levels. These findings indicate that to increase locally led trial conduct in Ethiopia, system wide changes are needed to create a more receptive and enabling research environment. Crucially, the creation of research networks between potential trial groups could provide much needed practical collaborative support through sharing of financial and project management burdens, knowledge and resources. These findings could have important implications for capacity-strengthening initiatives but further research is needed before the results can be generalised more widely. PMID:24285629

Human Research Initiative (HRI)

NASA Technical Reports Server (NTRS)

Motil, Brian

2003-01-01

A code U initiative starting in the FY04 budget includes specific funding for 'Phase Change' and 'Multiphase Flow Research' on the ISS. NASA GRC developed a concept for two facilities based on funding/schedule constraints: 1) Two Phase Flow Facility (TphiFFy) which assumes integrating into FIR; 2) Contact Line Dynamics Experiment Facility (CLiDE) which assumes integration into MSG. Each facility will accommodate multiple experiments conducted by NRA selected PIs with an overall goal of enabling specific NASA strategic objectives. There may also be a significant ground-based component.

Engineering and agronomy aspects of a long-term precision agriculture field experiment

USDA-ARS?s Scientific Manuscript database

Much research has been conducted on specific precision agriculture tools and implementation strategies, but little has been reported on long-term evaluation of integrated precision agriculture field experiments. In 2004 our research team developed and initiated a multi-faceted “precision agriculture...

Simulations of initial MHD experiments on the Madison Dynamo Experiment

NASA Astrophysics Data System (ADS)

O'Connell, R.; Forest, C. B.; Goldwin, J. M.; Kendrick, R. D.; Canary, H. W.; Nornberg, M. D.; Jaun, A.

1999-11-01

Initial experiments for a liquid metal MHD device have been modelled using measurements from geometrically similar water experiments. In the low B limit the water flows are the same as sodium flows. Two codes have been written to predict 1) linear stability of the system and 2) the response of the system to an externally applied vertical magnetic field, using measured velocity profiles. Predictions are made for a first set of MHD experiments, including: a) demonstration of the distortion and amplification of externally applied magnetic fields by sheared flows, b) demonstration of the β-effect by measurement of the turbulent conductivity, c) demonstration of a turbulent α effect and d) characterization of magnetic eigenmodes.

Hitting the Reset Button on Education: Student Reports on Going to College

ERIC Educational Resources Information Center

Paiewonsky, Maria

2011-01-01

Students with intellectual disabilities are taking the lead conducting participatory action research (PAR) to chronicle their college experience as part of a national college access initiative. This research currently involves college students with intellectual disabilities documenting their experiences using multimedia tools. These data are then…

77 FR 25533 - Agency Requests for Approval of a New Information Collection(s): Human Subjects Experiments...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-30

... observational experiments are being conducted in support of current agency regulatory efforts that contemplate... comments [identified by Docket No. NHTSA- 2012-0046] through one of the following methods: Federal e... Information Collection. Background: NHTSA has initiated research and rulemaking to address these issues...

Contingency Tracking during Unsignaled Delayed Reinforcement

ERIC Educational Resources Information Center

Keely, Josue; Feola, Tyler; Lattal, Kennon A.

2007-01-01

Three experiments were conducted with rats in which responses on one lever (labeled the functional lever) produced reinforcers after an unsignaled delay period that reset with each response during the delay. Responses on a second, nonfunctional, lever did not initiate delays, but, in the first and third experiments, such responses during the last…

Reproducible Crystal Growth Experiments in Microgravity Science Glovebox at the International Space Station (SUBSA Investigation)

NASA Technical Reports Server (NTRS)

Ostrogorsky, A.; Marin, C.; Volz, M. P.; Bonner, W. A.

2005-01-01

Solidification Using a Baffle in Sealed Ampoules (SUBSA) is the first investigation conducted in the Microgravity Science Glovebox (MSG) Facility at the International Space Station (ISS) Alpha. 8 single crystals of InSb, doped with Te and Zn, were directionally solidified in microgravity. The experiments were conducted in a furnace with a transparent gradient section, and a video camera, sending images to the earth. The real time images (i) helped seeding, (ii) allowed a direct measurement of the solidification rate. The post-flight characterization of the crystals includes: computed x-ray tomography, Secondary Ion Mass Spectroscopy (SIMS), Hall measurements, Atomic Absorption (AA), and 4 point probe analysis. For the first time in microgravity, several crystals having nearly identical initial transients were grown. Reproducible initial transients were obtained with Te-doped InSb. Furthermore, the diffusion controlled end-transient was demonstrated experimentally (SUBSA 02). From the initial transients, the diffusivity of Te and Zn in InSb was determined.

Dependence of energy characteristics of ascending swirling air flow on velocity of vertical blowing

NASA Astrophysics Data System (ADS)

Volkov, R. E.; Obukhov, A. G.; Kutrunov, V. N.

2018-05-01

In the model of a compressible continuous medium, for the complete Navier-Stokes system of equations, an initial boundary problem is proposed that corresponds to the conducted and planned experiments and describes complex three-dimensional flows of a viscous compressible heat-conducting gas in ascending swirling flows that are initiated by a vertical cold blowing. Using parallelization methods, three-dimensional nonstationary flows of a polytropic viscous compressible heat-conducting gas are constructed numerically in different scaled ascending swirling flows under the condition when gravity and Coriolis forces act. With the help of explicit difference schemes and the proposed initial boundary conditions, approximate solutions of the complete system of Navier-Stokes equations are constructed as well as the velocity and energy characteristics of three-dimensional nonstationary gas flows in ascending swirling flows are determined.

A new practice environment measure based on the reality and experiences of nurses working lives.

PubMed

Webster, Joan; Flint, Anndrea; Courtney, Mary

2009-01-01

To explore the underlying organizational issues affecting a nurses' decision to leave and to develop a contemporary practice environment measure based on the experiences of nurses working lives. Turnover had reached an unacceptable level in our organization but underlying reasons for leaving were unknown. In-depth interviews were conducted with 13 nurses who had resigned. Transcripts were analysed using the constant comparative method. Information from the interviews informed the development a new practice environment tool, which has undergone initial testing using the Content Validity Index and Chronbach's alpha. Two domains ('work life' and 'personal life/professional development') and five themes ('feeling safe', 'feeling valued', 'getting things done', 'professional development' and 'being flexible') emerged from the interviews. A content validity score for the new instrument was 0.79 and Chronbach's alpha 0.93. The new practice environment tool has shown useful initial reliability and validity but requires wider testing in other settings. The reality and experiences of nurses working lives can be identified through exit interviews conducted by an independent person. Information from such interviews is useful in identifying an organization's strength and weaknesses and to develop initiatives to support retention.

EURECA 11 months in orbit: Initial post flight investigation results

NASA Technical Reports Server (NTRS)

Dover, Alan; Aceti, Roberto; Drolshagen, Gerhard

1995-01-01

This paper gives a brief overview of the European free flying spacecraft 'EURECA' and the initial post flight investigations following its retrieval in June 1993. EURECA was in low earth orbit for 11 months commencing in August 1992, and is the first spacecraft to be retrieved and returned to Earth since the recovery of LDEF. The primary mission objective of EURECA was the investigation of materials and fluids in a very low micro-gravity environment. In addition other experiments were conducted in space science, technology and space environment disciplines. The European Space Agency (ESA) has taken the initiative in conducting a detailed post-flight investigation to ensure the full exploitation of this unique opportunity.

Educators' Experiences with and Attitudes toward Accessibility Features and Accommodations

ERIC Educational Resources Information Center

Thurlow, Martha L.; Larson, Erik D.; Lazarus, Sheryl S.; Shyyan, Vitaliy V.; Christensen, Laurene L.

2017-01-01

To evaluate the experiences that teachers and other decision makers were having with accessibility features and accommodations, as well as their attitudes toward them, an online survey was conducted with educators in nine states. These states were part of an Enhanced Assessment Initiative grant project to promote optimal decision making about…

An Examination of the Benefits, Limitations, and Challenges of Conducting Randomized Experiments with Principals

ERIC Educational Resources Information Center

Camburn, Eric M.; Goldring, Ellen; Sebastian, James; May, Henry; Huff, Jason

2016-01-01

Purpose: The past decade has seen considerable debate about how to best evaluate the efficacy of educational improvement initiatives, and members of the educational leadership research community have entered the debate with great energy. Throughout this debate, the use of randomized experiments has been a particularly contentious subject. This…

Physical Activity during Physical Education Lessons: A Qualitative Investigation of Australian PE Teacher Perceptions

ERIC Educational Resources Information Center

Bennie, Andrew; Langan, Edel

2015-01-01

School physical education (PE) experiences play a critical role in adolescents' physical activity (PA) levels. Teachers are crucial to students' initial experiences in PA; however, limited research has explored teachers' perspectives about PA during PE using in-depth qualitative research techniques. We conducted interviews with 25 current…

The NASA Langley laminar-flow-control experiment on a swept, supercritical airfoil: Evaluation of initial perforated configuration

NASA Technical Reports Server (NTRS)

Harris, Charles D.; Brooks, Cuyler W., Jr.; Clukey, Patricia G.; Stack, John P.

1992-01-01

The initial evaluation of a large-chord, swept, supercritical airfoil incorporating an active laminar-flow-control (LFC) suction system with a perforated upper surface is documented in a chronological manner, and the deficiencies in the suction capability of the perforated panels as designed are described. The experiment was conducted in the Langley 8-Foot Transonic Pressure Tunnel. Also included is an evaluation of the influence of the proximity of the tunnel liner to the upper surface of the airfoil pressure distribution.

The Best Possible Intentions Testing Prophylactic Approaches on Humans in Developing Countries

PubMed Central

2013-01-01

Debates on human experiments in developing countries focus on ethical principles such as informed consent, accountability, involvement of the concerned communities, and the improvement of local health services. Public health specialists who conducted human experiments in Rio de Janeiro (1902–1905) and in Guatemala (1947–1948) believed, however, that they were acting in the best interests of local populations, were aware of the importance of informed consent, were closely collaborating with local health professionals, and were contributing to the development of local health structures. Nevertheless, their investigations went dramatically wrong. An initial desire to conduct ethically and scientifically sound studies was undermined by pressure to obtain results and to save the researchers’ initial investment, the possibility of freely using hospitalized patients as experimental participants, uncritical help from local professional elites, and structural pitfalls of experimenting with severely deprived people. These elements can still be found in trials of preventive methods in the Global South. PMID:23237168

Pore Formation and Mobility Investigation (PFMI): Concept, Hardware Development and Initial Analysis of Experiments

NASA Technical Reports Server (NTRS)

Grugel, Richard N.

2004-01-01

Porosity in the form of "bubbles and pipes" can occur during controlled directional solidification processing of metal alloys. This is a consequence that 1) precludes obtaining any meaningful scientific results and 2) is detrimental to desired material properties. Unfortunately, several Microgravity experiments have been compromised by porosity. The intent of the PFMI investigation is to conduct a systematic effort directed towards understanding porosity formation and mobility during controlled directional solidification (DS) in a microgravity environment. PFMI uses a pure transparent material, succinonitrile (SCN), as well as SCN "alloyed" with water, in conjunction with a translating temperature gradient stage so that direct observation and recording of pore generation and mobility can be made. PFMI is investigating the role of thermocapillary forces and temperature gradients in affecting bubble dynamics as well as other solidification processes in a microgravity Environment. This presentation will cover the concept, hardware development, operations, and the initial results from experiments conducted aboard the International Space Station. .

Evaluation of the Effectiveness of the Alabama Math, Science, and Technology Initiative (AMSTI). Final Report. NCEE 2012-4008

ERIC Educational Resources Information Center

Newman, Denis; Finney, Pamela B.; Bell, Steve; Turner, Herb; Jaciw, Andrew P.; Zacamy, Jenna L.; Gould, Laura Feagans

2012-01-01

This report presents the results of an experiment conducted in Alabama beginning in the 2006/07 school year, to determine the effectiveness of the Alabama Math, Science, and Technology Initiative (AMSTI), which aims to improve mathematics and science achievement in the state's K-12 schools. This study is the first randomized controlled trial…

Consultant's Playbook: A Survey of Pharmacy Consultant Experiences Among Hospitals In the University HealthSystem Consortium.

PubMed

Hicks, Dave; McCarthy, Bryan; Fanikos, John; Emamifar, Amir; Nedved, Andrea; Thompson, Bruce; Bender, Fred; McMahon, Patrick

2013-10-01

Our team surveyed a group of pharmacy directors to learn about their experiences with pharmacy consultants so that the directors might be able to use their consulting resources in a more effective manner. In May 2012, the University HealthSystem Consortium (UHC) Pharmacy Council Financial Performance Committee developed an electronic survey that collectively measured the characteristics, goals, and methodology of historical pharmacy consultant engagements and level of satisfaction. After e-mailing the initial electronic survey, we conducted follow-up telephone interviews with respondents from July through November 2012. These interviews were designed to include questions about expected outcomes, recommendations for evaluation processes, timelines for implementing the recommendations, consultants' expenses, and insights gained. A total of 23 pharmacy directors responded to the initial electronic survey; their organizations had engaged at least one consultant within the previous 5 years. Data were collected for 28 consultant engagements. Subsequent telephone interviews were conducted with 20 of the 23 pharmacy directors (87%) who completed the initial electronic survey, accounting for 25 of the 28 consultant engagements (89%). Cost reduction along with revenue enhancement was most often the focus of these engagements. These engagements were also mainly within the scope of an organization-wide effort initiated by the executive board or executive team. Consultant experiences varied greatly in terms of (1) the degree to which assistance was provided to the organization, (2) benchmarking methodologies and resources, and (3) timelines for implementing the consultants' recommendations. In general, most respondents rated their consultant experience as positive and were able to provide "pearls of wisdom" or lessons learned.

Effect of supplemental sodium chloride and hydrochloric acid added to initial starter diets containing spray-dried blood plasma and lactose on resulting performance and nitrogen digestibility of 3-week-old weaned pigs.

PubMed

Mahan, D C; Wiseman, T D; Weaver, E; Russell, L

1999-11-01

Four experiments evaluated the efficacy of Na or Cl or their combination added to weanling pig diets that contained plasma protein and lactose on pig performance and N digestibility. The four experiments used a total of 563 crossbred pigs weaned at 22+/-1 d of age averaging 6.4 kg body weight. The basal diet in each experiment contained 5.8% plasma protein and 20% lactose and analyzed .20% Na and .23% Cl. In Exp. 1, NaCl was added to treatment diets at 0, .20, .40, or .60%. The trial was conducted for a 21 d period in a randomized complete block (RCB) design in seven replicates. Improved growth rates (P < .01) and gain:feed ratios (P < .01) occurred up to a dietary salt level of .40%. In Exp. 2, we evaluated the interaction of Na and Cl on pig performance. The experiment was a 2 x 2 factorial arrangement in a RCB design conducted in seven replicates. Total dietary Na was .20 or .36%, and Cl was included at .25 or .45%. Although there was a numerical increase in pig gains with added Na, the response was not significant (P > .15), but both gains (P < .01) and gain:feed ratios (P < .01) increased at the higher dietary Cl level. In Exp. 3, we evaluated the effect of five dietary levels of Cl added at .06% increments to a basal diet that analyzed .34% Na and .20% Cl on postweaning pig performance. The experiment was a RCB design conducted in eight replicates. A growth response (P < .01) to the .38% Cl level occurred during the initial 14-d postweaning period and to the .32% Cl level from 14 to 21 d. Gain:feed ratio increased each week with added Cl, but it was significant only for the period from d 0 to 7 d (P < .01). A N digestibility trial, using the diets of Exp. 3, constituted Exp. 4, and groups of three pigs per stainless steel metabolism crate were pair-fed to pigs fed the basal diet. The experiment was a RCB design conducted in three replicates over a 3-wk period. The results demonstrated a weekly decrease in fecal N (P < .01), no effect on urinary N (P < .15), improved N retention (P < .01), and an improved apparent N digestibility (P < .01) to the .38% dietary Cl concentration during the initial 2 wk postweaning. These experiments suggest that although plasma protein contributed Na and Cl to the initial diets of weaned pigs, additional Na and Cl, but particularly Cl, improved pig growth, N retention, and N digestibility. The results suggest a dietary minimum of .38% total Cl level during the initial 2 wk postweaning.

A Study of the Effects of Microteaching Experiences Upon the Classroom Behavior of Social Studies Student Teachers.

ERIC Educational Resources Information Center

Limbacher, Philip C.

The hypotheses of this field study, conducted in connection with the Teaching Techniques Laboratory at the University of Illinois, were that student teachers who had participated in a supervised, laboratory, microteaching experience would: 1) receive more favorable pupil evaluations of an initial and final teaching effort on the Teacher…

Health Experiences, Concerns, and Interactions with Effectiveness of Secondary Agriculture Teachers in the United States.

ERIC Educational Resources Information Center

Lee, Jasper S.; Westrom, Lyle E.

This publication summarizes the findings of several initiatives in studying the health aspects of secondary agriculture teachers in the United States. The study was specifically conducted to determine the health experiences of secondary agriculture teachers, the health problems that cause them to miss work, their health care concerns, personal…

Student Perspectives on First Year Experience Initiatives Designed for Pre-Service Teachers in Their First Weeks of University Study

ERIC Educational Resources Information Center

Larkin, Kevin; Rowan, Leonie; Garrick, Barbara; Beavis, Catherine

2016-01-01

Universities throughout Australia are increasingly investing significant amounts of time and money in efforts to improve the quality of first year students' experiences and, by extension, increase retention, performance and student satisfaction. This paper reports upon a pilot research project conducted at a Queensland university that investigates…

Life's Little Problems: An Intensive Look at the Daily Experiences of Young Children. Informal Paper.

ERIC Educational Resources Information Center

Wolfson, Bernice J.; Jackson, Philip W.

Three studies were conducted in an initial attempt to investigate the psychological importance of trivial everyday frustrations encountered by preschool children. Study 1 analyzed the frequency and quality of experiences that could be interpreted as interfering in some way with children's natural pursuit of their desires. In a nursery school…

Transit emergency planning and response assessment initiative

DOT National Transportation Integrated Search

2005-09-01

Following the experience of four major hurricanes impacting Florida in less than six weeks, the Florida Department of Transportation (FDOT) contracted with the University of South Floridas Center for Urban Transportation Research (CUTR) to conduct...

On the granular fingering instability: controlled triggering in laboratory experiments and numerical simulations

NASA Astrophysics Data System (ADS)

Vriend, Nathalie; Tsang, Jonny; Arran, Matthew; Jin, Binbin; Johnsen, Alexander

2017-11-01

When a mixture of small, smooth particles and larger, coarse particles is released on a rough inclined plane, the initial uniform front may break up in distinct fingers which elongate over time. This fingering instability is sensitive to the unique arrangement of individual particles and is driven by granular segregation (Pouliquen et al., 1997). Variability in initial conditions create significant limitations for consistent experimental and numerical validation of newly developed theoretical models (Baker et al., 2016) for finger formation. We present an experimental study using a novel tool that sets the initial fingering width of the instability. By changing this trigger width between experiments, we explore the response of the avalanche breakup to perturbations of different widths. Discrete particle simulations (using MercuryDPM, Thornton et al., 2012) are conducted under a similar setting, reproducing the variable finger width, allowing validation between experiments and numerical simulations. A good agreement between simulations and experiments is obtained, and ongoing theoretical work is briefly introduced. NMV acknowledges the Royal Society Dorothy Hodgkin Research Fellowship.

Exploring Innovation Processes from a Complexity Perspective. Part II. Experiences from the Subsea Increased Oil Recovery Case

ERIC Educational Resources Information Center

Aasen, Tone Merethe Berg; Johannessen, Stig

2007-01-01

In this second part of the papers, exploring innovation processes from a complexity perspective, we present an empirical example to strengthen further the relevance of the approach. The example draws on a longitudinal research initiative conducted in cooperation with the Norwegian petroleum company Statoil ASA. We conducted our research into the…

Early Adolescent Sexual Initiation and Physical/Psychological Symptoms: A Comparative Analysis of Five Nations

PubMed Central

Farhat, Tilda; Halpern, Carolyn Tucker; Godeau, Emmanuelle; Gabhainn, Saoirse Nic

2010-01-01

Although most people in developed countries experience sexual initiation during adolescence, little is known about inter-country variability in the psychosocial correlates of early initiation. Population-based samples of 15-year-olds (n = 6,111, 52% female) who participated in the Health Behaviors in School-Aged Children Study (Finland, Scotland, France and Poland, 1997/1998) or the National Longitudinal Study of Adolescent Health (United States, 1996) self-reported sexual intercourse experience and physical (headaches, trouble sleeping) or psychological (unhappiness, loneliness, sadness, moodiness) symptoms. Analyses were conducted stratified by gender. Sexual initiation prevalence and symptoms scores varied significantly across nations. In adjusted models, sexual initiation was not related to symptoms among boys in any nation, but significantly positively related to symptoms among girls in Poland and the US. Results support variability by gender and nation in the relationship between adolescents’ sexual initiation and physical/psychological symptoms. Empirically investigating specific features of national contexts that generate these differences should be explored further. PMID:20333456

Early adolescent sexual initiation and physical/psychological symptoms: a comparative analysis of five nations.

PubMed

Madkour, Aubrey Spriggs; Farhat, Tilda; Halpern, Carolyn Tucker; Godeau, Emmanuelle; Nic Gabhainn, Saoirse

2010-10-01

Although most people in developed countries experience sexual initiation during adolescence, little is known about inter-country variability in the psychosocial correlates of early initiation. Population-based samples of 15-year-olds (n = 6,111, 52% female) who participated in the Health Behaviors in School-Aged Children Study (Finland, Scotland, France and Poland, 1997/1998) or the National Longitudinal Study of Adolescent Health (United States, 1996) self-reported sexual intercourse experience and physical (headaches, trouble sleeping) or psychological (unhappiness, loneliness, sadness, moodiness) symptoms. Analyses were conducted stratified by gender. Sexual initiation prevalence and symptoms scores varied significantly across nations. In adjusted models, sexual initiation was not related to symptoms among boys in any nation, but significantly positively related to symptoms among girls in Poland and the US. Results support variability by gender and nation in the relationship between adolescents' sexual initiation and physical/psychological symptoms. Empirically investigating specific features of national contexts that generate these differences should be explored further.

Plasma Discharge Initiation of Explosives in Rock Blasting Application: A Case Study

NASA Astrophysics Data System (ADS)

Jae-Ou, Chae; Young-Jun, Jeong; V, M. Shmelev; A, A. Denicaev; V, M. Poutchkov; V, Ravi

2006-07-01

A plasma discharge initiation system for the explosive volumetric combustion charge was designed, investigated and developed for practical application. Laboratory scale experiments were carried out before conducting the large scale field tests. The resultant explosions gave rise to less noise, insignificant seismic vibrations and good specific explosive consumption for rock blasting. Importantly, the technique was found to be safe and environmentally friendly.

A Strategic Defense Initiative Organization Software Testing Initiative

DTIC Science & Technology

1990-10-01

One group of researchers is investigating a version of this analysis termed constrained expression analysis [Dillon 1988c]. Here a design is...examined. Academic researchers will assist in developing experiments. In addition, an organization or group of people will be identified 14 as the focal...to make the transition into common practice. Research is being conducted into control -based test data adequacy criteria to support the dynamic

DOE Office of Scientific and Technical Information (OSTI.GOV)

Desjardins, Tiffany; Schmidt, Derek William; Di Stefano, Carlos

These experiments are the first experiments in the Mshock campaign at the National Ignition Facility. The experiment is scheduled to be conducted on Dec. 14, 2017. The goal of the Mshock campaign is to study feedthrough dynamics of the Richtmyer- Meshkov instability in a thin layer. These dynamics will be studied in both a reshock configuration (initially) and then in a multi-shock configuration where it is planned to reshock the RM instability up to 3 times (four shocks total).

The Impact of a History of Adverse Childhood Experiences on Breastfeeding Initiation and Exclusivity: Findings from a National Population Health Survey.

PubMed

Ukah, Ugochinyere Vivian; Adu, Prince A; De Silva, Dane A; von Dadelszen, Peter

2016-12-01

Exclusive breastfeeding is strongly recommended by the World Health Organization. Given the low rate of exclusive breastfeeding in Canada and the increasing reports of a history of adverse childhood experiences, this study sought to investigate the association between a history of adverse childhood experiences and breastfeeding initiation and breastfeeding. Data used for this study were based on the 2011-2012 Canadian Community Health Survey, collected using a cross-sectional survey. The outcome measures were breastfeeding initiation and exclusive breastfeeding for 6 months or more. History of adverse childhood experiences was the main explanatory variable. Multivariable logistic regression models were developed to investigate the effect on breastfeeding initiation and on exclusive breastfeeding in women who gave birth within 5 years before when the surveys were conducted. The study sample included 697 and 633 women for analyses on breastfeeding initiation and breastfeeding, respectively. The proportion of women with breastfeeding initiation and exclusive breastfeeding for up to 6 months in this study were 96.8% and 42.8%, respectively. After controlling for age and highest level of education, having a history of adverse childhood experiences was not significantly associated with breastfeeding initiation (odds ratio [OR] 0.46, 95% confidence interval [CI] 0.10-1.87), but mothers with such history were less likely to exclusively breastfeed for up to 6 months compared with those without (OR 0.53, 95% CI 0.31-0.90). These findings suggest the need for more breastfeeding monitoring programs beyond the hospital environment to provide more support to Canadian mothers, especially those who have experienced adverse childhood experiences or trauma in the past.

Pulsed plasma chemical synthesis of SixCyOz composite nanopowder

NASA Astrophysics Data System (ADS)

Kholodnaya, G.; Sazonov, R.; Ponomarev, D.; Remnev, G.

2017-05-01

SixCyOz composite nanopowder with an average size of particles about 10-50 nm was produced using the pulsed plasma chemical method. The experiments on the synthesis of nanosized composite were carried out using a TEA-500 pulsed electron accelerator. To produce a composite, SiCl4, O2, and CH4 were used. The major part of experiments was conducted using a plasma chemical reactor (quartz, 140 mm diameter, 6 l volume). The initial reagents were injected into the reactor, then a pulsed electron beam was injected which initiated the chemical reactions whose products were the SixCyOz composite nanopowder. To define the morphology of the particles, the JEOL-II-100 transmission electron microscope (TEM) with an accelerating voltage of 100 kV was used. The substances in the composition of the composite nanopowder were identified using the infrared absorption optical spectrum. To conduct this analysis, the Nicolet 5700 FT-IR spectrometer was used.

Magnetic fields and orientation in homing pigeons: experiments of the late W. T. Keeton.

PubMed Central

Moore, B R

1988-01-01

The late W. T. Keeton conducted 35 experiments examining the effects of bar magnets upon the navigation of experienced homing pigeons on overcast days. Six statistics summarize the consistency and accuracy of the birds' initial orientation and the speed and success of their subsequent homing. Magnets had no significant overall effect upon these measures. PMID:3387447

Immobilization of Iodate and Iodide using Iron Oxides through Sorption and Co-precipitation at Hanford Site

NASA Astrophysics Data System (ADS)

Wang, G.; Qafoku, N. P.; Truex, M. J.; Strickland, C. E.; Freedman, V. L.

2017-12-01

Isotopes of iodine were generated during plutonium production at the U.S. Department of Energy (DOE) Hanford Site. The long half-life 129I generated during reactor operations has been released into the subsurface, resulting in several large plumes at the Hanford subsurface. We studied the interaction of iodate (IO3-) and iodide (I-) with Fe oxides. A series of batch experiments were conducted to investigate adsorption and co-precipitation of iodine species in the presence of a variety of Fe oxides, such as ferrihydrite, goethite, hematite and magnetite. In the sorption experiments, each Fe oxide was added to an artificial groundwater containing either iodate or iodide, and reacted at room temperature. The sorption batch experiments for each mineral were conducted at varied initial iodate or iodide concentrations under 3 different pH conditions (pH 5, 7, and 9). In the co-precipitation batch experiments, the initial Fe-mineral-forming solutions were prepared in artificial groundwater containing iodate or iodide. Our results indicate that both sorption and co-precipitation are viable mechanisms of the attenuation of the liquid phase iodine. Species Fe oxides could serve as hosts of iodate and iodide that are present at the Hanford subsurface.

Effect of Initial Conditions on Reproducibility of Scientific Research

PubMed Central

Djulbegovic, Benjamin; Hozo, Iztok

2014-01-01

Background: It is estimated that about half of currently published research cannot be reproduced. Many reasons have been offered as explanations for failure to reproduce scientific research findings- from fraud to the issues related to design, conduct, analysis, or publishing scientific research. We also postulate a sensitive dependency on initial conditions by which small changes can result in the large differences in the research findings when attempted to be reproduced at later times. Methods: We employed a simple logistic regression equation to model the effect of covariates on the initial study findings. We then fed the input from the logistic equation into a logistic map function to model stability of the results in repeated experiments over time. We illustrate the approach by modeling effects of different factors on the choice of correct treatment. Results: We found that reproducibility of the study findings depended both on the initial values of all independent variables and the rate of change in the baseline conditions, the latter being more important. When the changes in the baseline conditions vary by about 3.5 to about 4 in between experiments, no research findings could be reproduced. However, when the rate of change between the experiments is ≤2.5 the results become highly predictable between the experiments. Conclusions: Many results cannot be reproduced because of the changes in the initial conditions between the experiments. Better control of the baseline conditions in-between the experiments may help improve reproducibility of scientific findings. PMID:25132705

Effect of initial conditions on reproducibility of scientific research.

PubMed

Djulbegovic, Benjamin; Hozo, Iztok

2014-06-01

It is estimated that about half of currently published research cannot be reproduced. Many reasons have been offered as explanations for failure to reproduce scientific research findings- from fraud to the issues related to design, conduct, analysis, or publishing scientific research. We also postulate a sensitive dependency on initial conditions by which small changes can result in the large differences in the research findings when attempted to be reproduced at later times. We employed a simple logistic regression equation to model the effect of covariates on the initial study findings. We then fed the input from the logistic equation into a logistic map function to model stability of the results in repeated experiments over time. We illustrate the approach by modeling effects of different factors on the choice of correct treatment. We found that reproducibility of the study findings depended both on the initial values of all independent variables and the rate of change in the baseline conditions, the latter being more important. When the changes in the baseline conditions vary by about 3.5 to about 4 in between experiments, no research findings could be reproduced. However, when the rate of change between the experiments is ≤2.5 the results become highly predictable between the experiments. Many results cannot be reproduced because of the changes in the initial conditions between the experiments. Better control of the baseline conditions in-between the experiments may help improve reproducibility of scientific findings.

Ammonia-nitrogen and Phosphate Reduction by Bio-Filter using Factorial Design

NASA Astrophysics Data System (ADS)

Kasmuri, Norhafezah; Ashikin Mat Damin, Nur; Omar, Megawati

2018-02-01

Untreated landfill leachate is known to have endangered the environment. As such new treatment must be sought to ensure its cost-effective and sustainable treatment. Thus this paper reports the effectiveness of bio-filter to remove pollutants. In this research, the reduction of nutrients concentration was evaluated in two conditions: using bio-filter and without bio-filter. Synthetic wastewater was used in the batch culture. It was conducted within 21 days in the initial mediums of 100 mg/L ammonia-nitrogen. The nitrification medium consisted of 100 mg/L of ammonia-nitrogen while the nitrite assay had none. The petri dish experiment was also conducted to observe the existence of any colony. The results showed 22% of ammonia- nitrogen reduction and 33% phosphate in the nitrification medium with the bio-filter. The outcome showed that the bio-filter was capable to reduce the concentration of pollutants by retaining the slow growing bacteria (AOB and NOB) on the plastic carrier surface. The factorial design was applied to study the effect of the initial ammonia-nitrogen concentration and duration on nitrite-nitrogen removal. Finally, a regression equation was produced to predict the rate of nitrite-nitrogen removal without conducting extended experiments and to reduce the number of trials experiment.

Poloxamer 188 decreases susceptibility of artificial lipid membranes to electroporation.

PubMed Central

Sharma, V; Stebe, K; Murphy, J C; Tung, L

1996-01-01

The effect of a nontoxic, nonionic block co-polymeric surface active agent, poloxamer 188, on electroporation of artificial lipid membranes made of azolectin, was investigated. Two different experimental protocols were used in our study: charge pulse and voltage clamp. For the charge pulse protocol, membranes were pulsed with a 10-micronsecond rectangular voltage waveform, after which membrane voltage decay was observed through an external 1-M omega resistance. For the voltage clamp protocol the membranes were pulsed with a waveform that consisted of an initial 10-microsecond rectangular phase, followed by a negative sloped ramp that decayed to zero in the subsequent 500 microseconds. Several parameters characterizing the electroporation process were measured and compared for the control membranes and membranes treated with 1.0 mM poloxamer 188. For both the charge pulse and voltage clamp experiments, the threshold voltage (amplitude of initial rectangular phase) and latency time (time elapsed between the end of rectangular phase and the onset of membrane electroporation) were measured. Membrane conductance (measured 200 microseconds after the initial rectangular phase) and rise time (tr; the time required for the porated membrane to reach a certain conductance value) were also determined for the voltage clamp experiments, and postelectroporation time constant (PE tau; the time constant for transmembrane voltage decay after onset of electroporation) for the charge pulse experiments. The charge pulse experiments were performed on 23 membranes with 10 control and 13 poloxamer-treated membranes, and voltage pulse experiments on 49 membranes with 26 control and 23 poloxamer-treated membranes. For both charge pulse and voltage clamp experiments, poloxamer 188-treated membranes exhibited a statistically higher threshold voltage (p = 0.1 and p = 0.06, respectively), and longer latency time (p = 0.04 and p = 0.05, respectively). Also, poloxamer 188-treated membranes were found to have a relatively lower conductance (p = 0.001), longer time required for the porated membrane to reach a certain conductance value (p = 0.05), and longer postelectroporation time constant (p = 0.005). Furthermore, addition of poloxamer 188 was found to reduce the membrane capacitance by approximately 4-8% in 5 min. These findings suggest that poloxamer 188 adsorbs into the lipid bilayers, thereby decreasing their susceptibility to electroporation. Images FIGURE 1 PMID:8968593

Controlled experiments in cosmological gravitational clustering

NASA Technical Reports Server (NTRS)

Melott, Adrian L.; Shandarin, Sergei F.

1993-01-01

A systematic study is conducted of gravitational instability in 3D on the basis of power-law initial spectra with and without spectral cutoff, emphasizing nonlinear effects and measures of nonlinearity; effects due to short and long waves in the initial conditions are separated. The existence of second-general pancakes is confirmed, and it is noted that while these are inhomogeneous, they generate a visually strong signal of filamentarity. An explicit comparison of smoothed initial conditions with smoothed envelope models also reconfirms the need to smooth over a scale larger than any nonlinearity, in order to extrapolate directly by linear theory from Gaussian initial conditions.

Baseline antenna design for space exploration initiative

NASA Technical Reports Server (NTRS)

Chen, Y. L.; Nasir, M. A.; Lee, S. W.; Zaman, Afroz

1993-01-01

A key element of the future NASA Space Exploration Initiative (SEI) mission is the lunar and Mars telecommunication system. This system will provide voice, image, and data transmission to monitor unmanned missions to conduct experiments, and to provide radiometric data for navigation. In the later half of 1991, a study was conducted on antennas for the Mars Exploration Communication. Six antenna configurations were examined: three reflector and three phased array. The conclusion was that due to wide-angle scan requirement, and multiple simultaneous tracking beams, phased arrays are more suitable. For most part, this report studies phased array antenna designs for two different applications for Space Exploration Initiative. It also studies one design for a tri-reflector type antenna. These antennas will be based on a Mars orbiting satellite.

Engineering sciences area and module performance and failure analysis area

NASA Technical Reports Server (NTRS)

Ross, R. G., Jr.; Runkle, L. D.

1982-01-01

Photovoltaic-array/power-conditioner interface studies are updated. An experiment conducted to evaluate different operating-point strategies, such as constant voltage and pilot cells, and to determine array energy losses when the array is operated off the maximum power points is described. Initial results over a test period of three and a half weeks showed a 2% energy loss when the array is operated at a fixed voltage. Degraded-array studies conducted at NE RES that used a range of simulated common types of degraded I-V curves are reviewed. The instrumentation installed at the JPL field-test site to obtain the irradiance data was described. Experiments using an optical filter to adjust the spectral irradiance of the large-area pulsed solar simulator (LAPSS) to AM1.5 are described. Residential-array research activity is reviewed. Voltage isolation test results are described. Experiments performed on one type of module to determine the relationship between leakage current and temperature are reviewed. An encapsulated-cell testing approach is explained. The test program, data reduction methods, and initial results of long-duration module testing are described.

Current Practices in Global/International Advanced Pharmacy Practice Experiences: Preceptor and Student Considerations.

PubMed

Dornblaser, Emily K; Ratka, Anna; Gleason, Shaun E; Ombengi, David N; Tofade, Toyin; Wigle, Patricia R; Zapantis, Antonia; Ryan, Melody; Connor, Sharon; Jonkman, Lauren J; Ochs, Leslie; Jungnickel, Paul W; Abrons, Jeanine P; Alsharif, Naser Z

2016-04-25

The objective of this article is to describe the key areas of consideration for global/international advanced pharmacy practice experience (G/I APPE) preceptors, students and learning objectives. At the 2013 Annual Meeting of the American Association of Colleges of Pharmacy (AACP), the GPE SIG prepared and presented an initial report on the G/IAPPE initiatives. Round table discussions were conducted at the 2014 AACP Annual Meeting to document GPE SIG member input on key areas in the report. Literature search of PubMed, Google Scholar and EMBASE with keywords was conducted to expand this report. In this paper, considerations related to preceptors and students and learning outcomes are described. Preceptors for G/I APPEs may vary based on the learning outcomes of the experience. Student learning outcomes for G/I APPEs may vary based on the type of experiential site. Recommendations and future directions for development of G/IAPPEs are presented. Development of a successful G/I APPE requires significant planning and consideration of appropriate qualifications for preceptors and students.

Understanding the Influence Career Paths Have on Community and Technical College Chief Business Officers' Satisfaction with Their Position: A Mixed Method Investigation

ERIC Educational Resources Information Center

File, Carter L.

2013-01-01

This study was undertaken to understand whether a community or technical college chief business officer's career line influenced the lived experience of job satisfaction. This mixed method study was conducted in a two-phase approach using the Explanatory Design: Participant Selection Model variant. An initial quantitative survey was conducted from…

Ground vibration test of the laminar flow control JStar airplane

NASA Technical Reports Server (NTRS)

Kehoe, M. W.; Cazier, F. W., Jr.; Ellison, J. F.

1985-01-01

A ground vibration test was conducted on a Lockheed JetStar airplane that had been modified for the purpose of conducting laminar flow control experiments. The test was performed prior to initial flight flutter tests. Both sine-dwell and single-point-random excitation methods were used. The data presented include frequency response functions and a comparison of mode frequencies and mode shapes from both methods.

Non-modal analysis of the diocotron instability for cylindrical geometry with conducting boundary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mikhailenko, V. V.; Seok Kim, Jin; Jo, Younghyun

2014-05-15

The temporal evolution of the linear diocotron instability of a cylindrical annular plasma column surrounded by a conducting boundary has been investigated by using the methodology of the cylindrical shearing modes. The linear solution of the initial and boundary-value problems is obtained which is valid for any time at which linear effects dominate. The solution reveals that the initial perturbations of the electron density pass through the stage of the non-modal evolution when the perturbation experiences spatio-temporal distortion pertinent to the considered geometry of the electron column. The result is confirmed by a two-dimensional cylindrical particle-in-cell simulation.

Reflections of a Wave: An Analysis of Photonic Doppler Velocimetry Systems

DTIC Science & Technology

2015-03-16

system employed by the Advanced Initiation Sciences team, (Munitions Direc - torate, AFRL) is capable of explosive sensitivity testing. The errors from...1961, experiments proved that Semenov Theory aligned well with well- stirred liquids [25, p. 179]. In combat applications, the military usually utilizes...solid explosives instead of liquid ones due to the higher stability of solid-molded explosives where conduction has a huge influence on initiation

An investigation of crown fuel bulk density effects on the dynamics of crown fire initiation in shrublands

Treesearch

Watcharapong Tachajapong; Jesse Lozano; Shankar Mahalingam; Xiangyang Zhou; David R. Weise

2008-01-01

Crown fire initiation is studied by using a simple experimental and detailed physical modeling based on Large Eddy Simulation (LES). Experiments conducted thus far reveal that crown fuel ignition via surface fire occurs when the crown base is within the continuous flame region and does not occur when the crown base is located in the hot plume gas region of the surface...

Shock initiation and detonation properties of bisfluorodinitroethyl formal (FEFO)

NASA Astrophysics Data System (ADS)

Gibson, L. L.; Sheffield, S. A.; Dattelbaum, Dana M.; Stahl, David B.

2012-03-01

FEFO is a liquid explosive with a density of 1.60 g/cm3 and an energy output similar to that of trinitrotoluene (TNT), making it one of the more energetic liquid explosives. Here we describe shock initiation experiments that were conducted using a two-stage gas gun using magnetic gauges to measure the wave profiles during a shock-to-detonation transition. Unreacted Hugoniot data, time-to detonation (overtake) measurements, and reactive wave profiles were obtained from each experiment. FEFO was found to initiate by the homogeneous initiation model, similar to all other liquid explosives we have studied (nitromethane, isopropyl nitrate, hydrogen peroxide). The new unreacted Hugoniot points agree well with other published data. A universal liquid Hugoniot estimation slightly under predicts the measured Hugoniot data. FEFO is very insensitive, with about the same shock sensitivity as the triamino-trinitro-benzene (TATB)-based explosive PBX9502 and cast TNT.

Initiation of Addiction Treatment and Access to Services: Young Adults' Accounts of Their Help-Seeking Experiences.

PubMed

Wagner, Vincent; Bertrand, Karine; Flores-Aranda, Jorge; Acier, Didier; Brunelle, Natacha; Landry, Michel; Brochu, Serge

2017-09-01

Substance addiction in young adults is particularly problematic. Yet, much remain at stake in understanding the specifics of this population's access to services. The objective of this study is to explore young adults' initiation of substance misuse treatment. Our study sample was composed of 35 individuals aged 18 to 30 with problematic psychoactive substance use who have been identified in criminal courts, hospital emergency departments, and Health and Social Services Centers in Québec (Canada). A thematic analysis was performed on the 62 semi-structured interviews conducted with participants. Three components emerged. First, personal elements-expectations, individual motivations, perceptions of use, and capacity to control it-influence initiation of substance misuse treatment. Second, family and peers have noticeable influences. Finally, system characteristics and prior care experiences also shape the process. Consideration should be given to tailor interventions that can reach young adults and encourage them to initiate appropriate care.

Optical Techniques for the Remote Detection of Biological Aerosols

DTIC Science & Technology

1974-08-01

1) Laboratory exneriments (2) Remote detection experiments. In the first phase , the optical characteristics of several selected biological...the-art optical sensor system. The estimates were favorable, and a second research phase was initiated. Remote detection experiments were conducted...that of phase fluorometry. The fluorescence is excited by 3. continuous light source, the output of which is modulated at a high freeuency by an optical

Designing for Humans in Autonomous Systems: Military Applications

DTIC Science & Technology

2014-01-01

attentional control, and gaming experience are important determinants of how well humans interact with agents supervising multiple assets . 6 4...mission performance, operator workload, trust, SA, and, most important , how they affected human safety. The initial experiments were conducted in a...that humans can also play an important role by being able to identify these objects (perception by proxy). Therefore, human involvement is useful

Ground testing on the nonvented fill method of orbital propellant transfer: Results of initial test series

NASA Technical Reports Server (NTRS)

Chato, David J.

1991-01-01

The results are presented of a series of no-vent fill experiments conducted on a 175 cu ft flightweight hydrogen tank. The experiments consisted of the nonvented fill of the tankage with liquid hydrogen using two different inlet systems (top spray, and bottom spray) at different tank initial conditions and inflow rates. Nine tests were completed of which six filled in excess of 94 percent. The experiments demonstrated a consistent and repeatable ability to fill the tank in excess of 94 percent using the nonvented fill technique. Ninety-four percent was established as the high level cutoff due to requirements for some tank ullage to prevent rapid tank pressure rise which occurs in a tank filled entirely with liquid. The best fill was terminated at 94 percent full with a tank internal pressure less than 26 psia. Although the baseline initial tank wall temperature criteria was that all portions of the tank wall be less than 40 R, fills were achieved with initial wall temperatures as high as 227 R.

FEANICS: A Multi-User Facility For Conducting Solid Fuel Combustion Experiments On ISS

NASA Technical Reports Server (NTRS)

Frate, David T.; Tofil, Todd A.

2001-01-01

The Destiny Module on the International Space Station (ISS) will soon be home for the Fluids and Combustion Facility's (FCF) Combustion Integrated Rack (CIR), which is being developed at the NASA Glenn Research Center in Cleveland, Ohio. The CIR will be the platform for future microgravity combustion experiments. A multi-user mini-facility called FEANICS (Flow Enclosure Accommodating Novel Investigations in Combustion of Solids) will also be built at NASA Glenn. This mini-facility will be the primary means for conducting solid fuel combustion experiments in the CIR on ISS. The main focus of many of these solid combustion experiments will be to conduct basic and applied scientific investigations in fire-safety to support NASA's Bioastronautics Initiative. The FEANICS project team will work in conjunction with the CIR project team to develop upgradeable and reusable hardware to meet the science requirements of current and future investigators. Currently, there are six experiments that are candidates to use the FEANICS mini-facility. This paper will describe the capabilities of this mini-facility and the type of solid combustion testing and diagnostics that can be performed.

Volunteering to Care for People with Severe Mental Illness: A Qualitative Study of the Significance of Professional and Private Life Experience.

PubMed

Ørtenblad, Lisbeth; Væggemose, Ulla; Gissel, Lene; Nissen, Nina Konstantin

2018-02-06

Challenges in recruiting volunteers encountered by psychiatric services are barely elucidated despite a general societal increase in volunteering. The aim of the study was to explore the significance of professional and private life experiences in willingness to volunteer to care for people with severe mental illness. Focus group interviews with volunteers in the Community Family Programme was conducted, followed by thematic analysis. All interviewees had professional and/or private experience of SMI, which had a major influence on their initial willingness to volunteer. Volunteering was an opportunity to pass on their experiences and to care for SMI people in ways that were not possible in their professions. The interviewees did not distinguish between the influences of professional and/or private life experiences on their willingness to volunteer. The study demonstrates the importance of professional and/or private life experiences in initial considerations about volunteering for mental health care. The consequences for recruitment practices are discussed.

Pore Formation and Mobility Investigation (PPMI): Description and Initial Analysis of Experiments Conducted aboard the International Space Station

NASA Technical Reports Server (NTRS)

Grugel, R. N.; Anilkumar, A. V.; Lee, C. P.

2003-01-01

Flow visualization experiments during the controlled directional melt back and re-solidification of succinonitrile (SCN) and SCN-water mixtures were conducted using the Pore Formation and Mobility Investigation (PFMI) apparatus in the glovebox facility (GBX) aboard the International Space Station. The study samples were initially 'cast' on earth under 450 millibar of nitrogen into 1 cm ID glass sample tubes approximately 30 cm in length, containing 6 in situ thermocouples. During the Space experiments, the processing parameters and flow visualization settings are remotely monitored and manipulated from the ground Telescience Center (TSC). The ground solidified sample is first subjected to a unidirectional melt back, generally at 10 microns per second, with a constant temperature gradient ahead of the melting interface. Bubbles of different sizes are seen to initiate at the melt interface and, upon release from the melting solid, translate at different speeds in the temperature field ahead of them before coming to rest. Over a period of time these bubbles dissolve into the melt. The gas-laden liquid is then directionally solidified in a controlled manner, generally starting at a rate of 1 micron /sec. Observation and preliminary analysis of bubble formation and mobility in pure SCN samples during melt back and the subsequent structure resulting during gas generation upon re-solidification are presented and discussed.

Pore Formation and Mobility Investigation (PFMI): Description and Initial Analysis of Experiments Conducted aboard the International Space Station

NASA Technical Reports Server (NTRS)

Grugel, R. N.; Anilkumar, A. V.; Lee, C. P.

2002-01-01

Flow visualization experiments during the controlled directional melt back and re-solidification of succinonitrile (SCN) and SCN-water mixtures were conducted using the Pore Formation and Mobility Investigation (PFMI) apparatus in the glovebox facility (GBX) aboard the International Space Station. The study samples were initially "cast" on earth under 450 millibar of nitrogen into 1 cm ID glass sample tubes approximately 30 cm in length, containing 6 in situ thermocouples. During the Space experiments, the processing parameters and flow visualization settings are remotely monitored and manipulated from the ground Telescience Center (TSC). The ground solidified sample is first subjected to a unidirectional melt back, generally at 10 microns per second, with a constant temperature gradient ahead of the melting interface. Bubbles of different sizes are seen to initiate at the melt interface and, upon release from the melting solid, translate at different speeds in the temperature field ahead of them before coming to rest. Over a period of time these bubbles dissolve into the melt. The gas-laden liquid is then directionally solidified in a controlled manner, generally starting at a rate of 1 micron /sec. Observation and preliminary analysis of bubble formation and mobility in pure SCN samples during melt back and the subsequent structure resulting during gas generation upon re-solidification are presented and discussed.

Numerical investigation for formability of aluminum 6016 alloy under non-isothermal warm forming process

NASA Astrophysics Data System (ADS)

Hu, P.; Dai, M. H.; Ying, L.; Shi, D. Y.; Zhao, K. M.; Lu, J. D.

2013-05-01

The warm forming technology of aluminum alloy has attracted attention from worldwide automotive engineering sector in recent years, with which the complex geometry parts can be realized at elevated temperature. A non-isothermal warm forming process for the heat treatable aluminum can quickly carry out its application on traditional production line by adding a furnace to heat up the aluminum alloy sheet. The 6000 aluminum alloy was investigated by numerical simulation and experiment using the Nakajima test model in this paper. A modified Fields-Backofen model was introduced into numerical simulation process to describe the thermo-mechanical flow behavior of a 6000 series aluminum alloy. The experimental data was obtained by conducting thermal-mechanical uniaxial tensile experiment in temperatures range of 25˜400°C to guarantee the numerical simulation more accurate. The numerical simulation was implemented with LS_DYNA software in terms of coupled dynamic explicit method for investigating the effect of initial forming temperature and the Binder Holder Force (BHF), which are critical process parameters in non-isothermal warm forming. The results showed that the optimal initial forming temperature range was 300°C˜350°C. By means of conducting numerical simulation in deep drawing box model, the forming window of BHF and temperature around the optimal initial forming temperature (275°, 300° and 325°) are investigated, which can provide guidance to actual experiment.

High-Energy-Density Shear Flow and Instability Experiments

NASA Astrophysics Data System (ADS)

Doss, F. W.; Flippo, K. A.; Merritt, E. C.; di Stefano, C. A.; Devolder, B. G.; Kurien, S.; Kline, J. L.

2017-10-01

High-energy-density shear experiments have been performed by LANL at the OMEGA Laser Facility and National Ignition Facility (NIF). The experiments have been simulated using the LANL radiation-hydrocode RAGE and have been used to assess turbulence models ability to function in the high-energy-density, inertial- fusion-relevant regime. Beginning with the basic configuration of two counter-oriented shock-driven flows of >= 100 km/s, which initiate a strong shear instability across an initially solid-density, 20 μm thick Al plate, variations of the experiment to details of the initial conditions have been performed. These variations have included increasing the fluid densities (by modifying the plate material from Al to Ti and Cu), imposing sinusoidal seed perturbations on the plate, and directly modifying the plate's intrinsic surface roughness. Radiography of the unseeded layer has revealed the presence of emergent Kelvin-Helmholtz structures which may be analyzed to infer fluid-mechanical properties including turbulent energy density. This work is conducted by the US DOE by LANL under contract DE-0AC52-06NA25396. This abstract is LA-UR-16-24930.

Lived experience researchers partnering with consumers and carers to improve mental health research: Reflections from an Australian initiative.

PubMed

Banfield, Michelle; Randall, Rebecca; O'Brien, Mearon; Hope, Sophie; Gulliver, Amelia; Forbes, Owen; Morse, Alyssa R; Griffiths, Kathleen

2018-05-30

Consumer and carer involvement in mental health research is a growing and developing field. Whilst there has been policy and in-principle support for such involvement from governments around the world, lived experience researchers conducting academic research in partnership with other consumers and carers remains uncommon. The Australian Capital Territory Consumer and Carer Mental Health Research Unit is based at The Australian National University and employs academic researchers with lived experience to undertake research directly relevant to the needs of mental health consumers and carers with the aim of influencing policy and practice. In this study, we share our experience of developing and conducting research within ACACIA to provide a model for meaningfully engaging mental health consumers and carers throughout the research process. © 2018 Australian College of Mental Health Nurses Inc.

On Union-Based Classes.

ERIC Educational Resources Information Center

Forsythe, Linda

1982-01-01

A course combining English in the workplace, information seeking and job application skills, occupational safety, and other workplace skills conducted by a community college and a major industrial union is described. The very successful program will be continued and developed based on the initial experience. (MSE)

The effect of crash experience on changes in risk taking among urban and rural young people.

PubMed

Lin, Mau-Roung; Huang, Wenzheng; Hwang, Hei-Fen; Wu, Hong-Dar Isaac; Yen, Lee-Lan

2004-03-01

A 20-month prospective study was conducted to investigate the effect of motorcycle crash experience on changes in risk taking among 2514 urban and 2304 rural students in Taiwan. Risk taking was assessed using a 14-item self-administered questionnaire at the beginning and end of the study. A risk-taking score for each student at the initial and the last follow-up assessments was generated from adding up points across all 14 items. For exposure variables, the study documented past motorcycle crash history at the initial assessment and collected detailed information about any motorcycle crash involvement that occurred during the study period. A general linear mixed model was applied to assess the effects of prior and recent crash involvements on the path of risk-taking behavior. The results show that at the initial assessment, students with crash experience had higher risk-taking levels than those without crash experience. However, crash experience, irregardless of whether it was measured in terms of crash history prior to the study, crash frequency, time elapsed since the last crash, or crash severity, did not significantly change the risk-taking path among students, even though its effect differed between urban and rural areas.

Shock timing experiments on the National Ignition Facility: Initial results and comparison with simulation

NASA Astrophysics Data System (ADS)

Robey, H. F.; Boehly, T. R.; Celliers, P. M.; Eggert, J. H.; Hicks, D.; Smith, R. F.; Collins, R.; Bowers, M. W.; Krauter, K. G.; Datte, P. S.; Munro, D. H.; Milovich, J. L.; Jones, O. S.; Michel, P. A.; Thomas, C. A.; Olson, R. E.; Pollaine, S.; Town, R. P. J.; Haan, S.; Callahan, D.; Clark, D.; Edwards, J.; Kline, J. L.; Dixit, S.; Schneider, M. B.; Dewald, E. L.; Widmann, K.; Moody, J. D.; Döppner, T.; Radousky, H. B.; Throop, A.; Kalantar, D.; DiNicola, P.; Nikroo, A.; Kroll, J. J.; Hamza, A. V.; Horner, J. B.; Bhandarkar, S. D.; Dzenitis, E.; Alger, E.; Giraldez, E.; Castro, C.; Moreno, K.; Haynam, C.; LaFortune, K. N.; Widmayer, C.; Shaw, M.; Jancaitis, K.; Parham, T.; Holunga, D. M.; Walters, C. F.; Haid, B.; Mapoles, E. R.; Sater, J.; Gibson, C. R.; Malsbury, T.; Fair, J.; Trummer, D.; Coffee, K. R.; Burr, B.; Berzins, L. V.; Choate, C.; Brereton, S. J.; Azevedo, S.; Chandrasekaran, H.; Eder, D. C.; Masters, N. D.; Fisher, A. C.; Sterne, P. A.; Young, B. K.; Landen, O. L.; Van Wonterghem, B. M.; MacGowan, B. J.; Atherton, J.; Lindl, J. D.; Meyerhofer, D. D.; Moses, E.

2012-04-01

Capsule implosions on the National Ignition Facility (NIF) [Lindl et al., Phys. Plasmas 11, 339 (2004)] are underway with the goal of compressing deuterium-tritium (DT) fuel to a sufficiently high areal density (ρR) to sustain a self-propagating burn wave required for fusion power gain greater than unity. These implosions are driven with a carefully tailored sequence of four shock waves that must be timed to very high precision in order to keep the DT fuel on a low adiabat. Initial experiments to measure the strength and relative timing of these shocks have been conducted on NIF in a specially designed surrogate target platform known as the keyhole target. This target geometry and the associated diagnostics are described in detail. The initial data are presented and compared with numerical simulations. As the primary goal of these experiments is to assess and minimize the adiabat in related DT implosions, a methodology is described for quantifying the adiabat from the shock velocity measurements. Results are contrasted between early experiments that exhibited very poor shock timing and subsequent experiments where a modified target geometry demonstrated significant improvement.

Isothermal and non-isothermal infiltration and deuterium transport: a case study on undisturbed soil column from headwater catchment

NASA Astrophysics Data System (ADS)

Sobotkova, Martina; Snehota, Michal; Tesar, Miroslav

2017-04-01

Isothermal and non-isothermal infiltration experiments with tracer breakthrough were carried out in the laboratory on intact column of sandy loam soil taken from Roklan site (Sumava Mountains, Czech Republic). In the case of isothermal experiment, the temperature of infiltrating water was almost equal to the initial temperature of the sample. For the non-isothermal case the infiltration was performed using water approximately 10 °C colder than was the initial temperature of soil sample. The experiments were otherwise conducted under the same initial and boundary conditions. Pressure heads and temperatures in two depths (8.8 and 15.3 cm) inside the soil were monitored as well as the temperature of water entering and leaving the sample. Water drained freely through the perforated plate at the bottom of the sample by gravity and outflow was measured using tipping bucket flowmeter. Permeability of the sample calculated for steady state stages of the experiment showed that significant difference between water flow rates recorded during two experiment could not be justified only by temperature induced changes of water viscosity and density. Results of deuterium breakthrough were nearly identical for isothermal and non-isothermal conditions.

A series solution for horizontal infiltration in an initially dry aquifer

NASA Astrophysics Data System (ADS)

Furtak-Cole, Eden; Telyakovskiy, Aleksey S.; Cooper, Clay A.

2018-06-01

The porous medium equation (PME) is a generalization of the traditional Boussinesq equation for hydraulic conductivity as a power law function of height. We analyze the horizontal recharge of an initially dry unconfined aquifer of semi-infinite extent, as would be found in an aquifer adjacent a rising river. If the water level can be modeled as a power law function of time, similarity variables can be introduced and the original problem can be reduced to a boundary value problem for a nonlinear ordinary differential equation. The position of the advancing front is not known ahead of time and must be found in the process of solution. We present an analytical solution in the form of a power series, with the coefficients of the series given by a recurrence relation. The analytical solution compares favorably with a highly accurate numerical solution, and only a small number of terms of the series are needed to achieve high accuracy in the scenarios considered here. We also conduct a series of physical experiments in an initially dry wedged Hele-Shaw cell, where flow is modeled by a special form of the PME. Our analytical solution closely matches the hydraulic head profiles in the Hele-Shaw cell experiment.

Solar thermal power systems point-focusing thermal and electric applications projects. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Marriott, A.

1980-01-01

The activities of the Point-Focusing Thermal and Electric Applications (PETEA) project for the fiscal year 1979 are summarized. The main thrust of the PFTEA Project, the small community solar thermal power experiment, was completed. Concept definition studies included a small central receiver approach, a point-focusing distributed receiver system with central power generation, and a point-focusing distributed receiver concept with distributed power generation. The first experiment in the Isolated Application Series was initiated. Planning for the third engineering experiment series, which addresses the industrial market sector, was also initiated. In addition to the experiment-related activities, several contracts to industry were let and studies were conducted to explore the market potential for point-focusing distributed receiver (PFDR) systems. System analysis studies were completed that looked at PFDR technology relative to other small power system technology candidates for the utility market sector.

Chemiluminescence as a condition monitoring method for thermal aging and lifetime prediction of an HTPB elastomer.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gillen, Kenneth Todd; Minier, Leanna M. G.; Celina, Mathias C.

Chemiluminescence (CL) has been applied as a condition monitoring technique to assess aging related changes in a hydroxyl-terminated-polybutadiene based polyurethane elastomer. Initial thermal aging of this polymer was conducted between 110 and 50 C. Two CL methods were applied to examine the degradative changes that had occurred in these aged samples: isothermal 'wear-out' experiments under oxygen yielding initial CL intensity and 'wear-out' time data, and temperature ramp experiments under inert conditions as a measure of previously accumulated hydroperoxides or other reactive species. The sensitivities of these CL features to prior aging exposure of the polymer were evaluated on the basismore » of qualifying this method as a quick screening technique for quantification of degradation levels. Both the techniques yielded data representing the aging trends in this material via correlation with mechanical property changes. Initial CL rates from the isothermal experiments are the most sensitive and suitable approach for documenting material changes during the early part of thermal aging.« less

Barratt with MSG in Kibo

NASA Image and Video Library

2009-04-29

ISS019-E-012391 (29 April 2009) --- Astronaut Michael Barratt, Expedition 19/20 flight engineer, activates the Microgravity Science Glovebox (MSG) from its A31p laptop, initiates and conducts a session, the first of Increment 19, with the experiment Smoke Point In Co-flow Experiment (SPICE), performed in the MSG and controlled by its A31p with SPICE micro-drives in the Kibo laboratory of the International Space Station.

Design and test of a compact optics system for the pool boiling experiment

NASA Technical Reports Server (NTRS)

Ling, Jerri S.; Laubenthal, James R.

1990-01-01

The experiment described seeks to improve the understanding of the fundamental mechanisms that constitute nucleate pool boiling. The vehicle for accomplishing this is an investigation, including tests to be conducted in microgravity and coupled with appropriate analyses, of the heat transfer and vapor bubble dynamics associated with nucleation, bubble growth/collapse and subsequent motion, considering the interrelations between buoyancy, momentum and surface tension which will govern the motion of the vapor and surrounding liquid, as a function of the heating rate at the heat transfer surface and the temperature level and distribution in the bulk liquid. The experiment is designed to be contained within the confines of a Get-Away-Special Canister (GAS Can) installed in the bay of the space shuttle. When the shuttle reaches orbit, the experiment will be turned on and testing will proceed automatically. In the proposed Pool Boiling Experiment a pool of liquid, initially at a precisely defined pressure and temperature, will be subjected to a step imposed heat flux from a semitransparent thin-film heater forming part of one wall of the container such that boiling is initiated and maintained for a defined period of time at a constant pressure level. Transient measurements of the heater surface and fluid temperatures near the surface will be made, noting especially the conditions at the onset of boiling, along with motion photography of the boiling process in two simultaneous views, from beneath the heating surface and from the side. The conduct of the experiment and the data acquisition will be completely automated and self-contained. For the initial flight, a total of nine tests are proposed, with three levels of heat flux and three levels of subcooling. The design process used in the development and check-out of the compact photographic/optics system for the Pool Boiling Experiment is documented.

Damage Progression in Buckle-Resistant Notched Composite Plates Loaded in Uniaxial Compression

NASA Technical Reports Server (NTRS)

McGowan, David M.; Davila, Carlos G.; Ambur, Damodar R.

2001-01-01

Results of an experimental and analytical evaluation of damage progression in three stitched composite plates containing an angled central notch and subjected to compression loading are presented. Parametric studies were conducted systematically to identify the relative effects of the material strength parameters on damage initiation and growth. Comparisons with experiments were conducted to determine the appropriate in situ values of strengths for progressive failure analysis. These parametric studies indicated that the in situ value of the fiber buckling strength is the most important parameter in the prediction of damage initiation and growth in these notched composite plates. Analyses of the damage progression in the notched, compression-loaded plates were conducted using in situ material strengths. Comparisons of results obtained from these analyses with experimental results for displacements and axial strains show good agreement.

The National Ignition Facility (NIF) as a User Facility

NASA Astrophysics Data System (ADS)

Keane, Christopher; NIF Team

2013-10-01

The National Ignition Facility (NIF) has made significant progress towards operation as a user facility. Through June 2013, NIF conducted over 1200 experiments in support of ICF, HED science, and development of facility capabilities. The NIF laser has met or achieved all specifications and a wide variety of diagnostic and target fabrication capabilities are in place. A NIF User Group and associated Executive Board have been formed. Two User Group meetings have been conducted since formation of the User Group. NIF experiments in fundamental science have provided important new results. NIF ramp compression experiments have been conducted using diamond and iron, with EOS results obtained at pressures up to approximately 50 Mbar and 8 Mbar, respectively. Initial experiments in supernova hydrodynamics, the fundamental physics of the Rayleigh-Taylor instability, and equation of state in the Gbar pressure regime have also been conducted. This presentation will discuss the fundamental science program at NIF, including the proposal solicitation and scientific review processes and other aspects of user facility operation. This work was performed under the auspices of the Lawrence Livermore National Security, LLC, (LLNS) under Contract No. DE-AC52-07NA27344.

Bubble formation in microgravity

NASA Technical Reports Server (NTRS)

Antar, Basil N.

1996-01-01

An extensive experimental program was initiated for the purpose of understanding the mechanisms leading to bubble generation during fluid handling procedures in a microgravity environment. Several key fluid handling procedures typical for PCG experiments were identified for analysis in that program. Experiments were designed to specifically understand how such procedures can lead to bubble formation. The experiments were then conducted aboard the NASA KC-135 aircraft which is capable of simulating a low gravity environment by executing a parabolic flight attitude. However, such a flight attitude can only provide a low gravity environment of approximately 10-2go for a maximum period of 30 seconds. Thus all of the tests conducted for these experiments were designed to last no longer than 20 seconds. Several experiments were designed to simulate some of the more relevant fluid handling procedures during protein crystal growth experiments. These include submerged liquid jet cavitation, filling of a cubical vessel, submerged surface scratch, attached drop growth, liquid jet impingement, and geysering experiments. To date, four separate KC-135 flight campaigns were undertaken specifically for performing these experiments. However, different experiments were performed on different flights.

Development and initial evaluation of a reconstituted water formulation that better represents natural waters(poster)

EPA Science Inventory

The use of reconstituted waters is deeply entrenched in many standardized aquatic toxicity testing protocols The primary appeal of reconstituted waters is inter-laboratory comparability, such that experiments performed in different laboratories can be conducted in (nominally) id...

Development and Initial Evaluation of a Reconstituted Water Formulation that Better Represents Natural Waters

EPA Science Inventory

The use of reconstituted waters is deeply entrenched in many standardized aquatic toxicity testing protocols. The primary appeal of reconstituted waters is inter-laboratory comparability, such that experiments performed in different laboratories can be conducted in (nominally) id...

THYROID AXIS INHIBITION IN XENOPUS LAEVIS: DEVELOPMENT OF AN AMPHIBIAN-BASED SCREENING ASSAY

EPA Science Inventory

In response to the initial EDSTAC recommendations, research was conducted on the development of a Xenopus laevis based tail resorption assay for evaluating thyroid axis disruption. These experiments highlighted key limitations associated with relying on tail resorption as a measu...

CHLORINE DECAY AND BIOFILM STUDIES IN A PILOT SCALE DRINKING WATER DISTRIBUTION DEAD END PIPE SYSTEM

EPA Science Inventory

Chlorine decay experiments using a pilot-scale water distribution dead end pipe system were conducted to define relationships between chlorine decay and environmental factors. These included flow rate, biomass concentration and biofilm density, and initial chlorine concentrations...

1995 Truck Size and Weight Performance-Based Workshop report : activity 5 : document North American and European experiences

DOT National Transportation Integrated Search

2012-08-01

This report presents the test plan for conducting the Technical Capability Analysis for the United States Department of Transportation (U.S. DOT) evaluation of the San Diego Integrated Corridor Management (ICM) Initiative Demonstration. The ICM proje...

Using Electronic Interviews to Explore Student Understanding

NASA Astrophysics Data System (ADS)

Wagner, D. J.; Rivera, J. J.; Mateycik, Fran; Jennings, Sybillyn

2005-09-01

This paper reports on methods used to probe student understandings of optical fibers and total internal reflection (TIR). The study was conducted as part of the expansion and improvement of web-based materials for an innovative introductory physics course. Initially, we conducted face-to-face Piaget-style interviews with a convenience sample. Our next step was to interview students taking the course at Rensselaer. Physical limitations necessitated that this be done from a distance, so we conducted "e-interviews" using a Chat Room. In this paper we focus on the e-interview experience, discussing similarities to and differences from the traditional face-to-face approach. In the process, we address how each method informs us about students' activation of prior experiences in making sense of unfamiliar phenomena (e.g., "transfer of learning").

Thermal conductance measurements of bolted copper joints for SuperCDMS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schmitt, R.; Tatkowski, Greg; Ruschman, M.

2015-09-01

Joint thermal conductance testing has been undertaken for bolted copper to copper connections from 60 mK to 26 K. This testing was performed to validate an initial design basis for the SuperCDMS experiment, where a dilution refrigerator will be coupled to a cryostat via multiple bolted connections. Copper used during testing was either gold plated or passivated with citric acid to prevent surface oxidation. Results obtained are well fit by a power law regression of joint thermal conductance to temperature and match well with data collected during a literature review.

Hypersonic Experimental and Computational Capability, Improvement and Validation. Volume 2

NASA Technical Reports Server (NTRS)

Muylaert, Jean (Editor); Kumar, Ajay (Editor); Dujarric, Christian (Editor)

1998-01-01

The results of the phase 2 effort conducted under AGARD Working Group 18 on Hypersonic Experimental and Computational Capability, Improvement and Validation are presented in this report. The first volume, published in May 1996, mainly focused on the design methodology, plans and some initial results of experiments that had been conducted to serve as validation benchmarks. The current volume presents the detailed experimental and computational data base developed during this effort.

Manufacturing the Horns of Dilemma: A Theory of Operational Initiative

DTIC Science & Technology

2015-05-21

Tsung offers insight, and offers the second compelling component to a theory of initiative. According to Mao, “Freedom of action is the very life of...unphased advances that might lead to entrapment by a numerically superior foe.”81 By conducting coordinated operations across the width of its front...doubtful whether firepower-based operations alone can in all cases unsettle an enemy and cause it to experience distress and defeat to the extent that it

Selection of Thermal Worst-Case Orbits via Modified Efficient Global Optimization

NASA Technical Reports Server (NTRS)

Moeller, Timothy M.; Wilhite, Alan W.; Liles, Kaitlin A.

2014-01-01

Efficient Global Optimization (EGO) was used to select orbits with worst-case hot and cold thermal environments for the Stratospheric Aerosol and Gas Experiment (SAGE) III. The SAGE III system thermal model changed substantially since the previous selection of worst-case orbits (which did not use the EGO method), so the selections were revised to ensure the worst cases are being captured. The EGO method consists of first conducting an initial set of parametric runs, generated with a space-filling Design of Experiments (DoE) method, then fitting a surrogate model to the data and searching for points of maximum Expected Improvement (EI) to conduct additional runs. The general EGO method was modified by using a multi-start optimizer to identify multiple new test points at each iteration. This modification facilitates parallel computing and decreases the burden of user interaction when the optimizer code is not integrated with the model. Thermal worst-case orbits for SAGE III were successfully identified and shown by direct comparison to be more severe than those identified in the previous selection. The EGO method is a useful tool for this application and can result in computational savings if the initial Design of Experiments (DoE) is selected appropriately.

Water pollution potential of spent oil shale residues. [From USBM, UOC, and TOSCO processes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1971-12-01

Physical properties, including porosity, permeability, particle size distribution, and density of spent shale from three different retorting operations, (TOSCO, USBM, and UOC) have been determined. Slurry experiments were conducted on each of the spent shales and the slurry analyzed for leachable dissolved solids. Percolation experiments were conducted on the TOSCO spent shale and the quantities of dissolved solids leachable determined. The concentrations of the various ionic species in the initial leachate from the column were high. The major constituents, SO/sub 4//sup 2 -/ and Na/sup +/, were present in concentrations of 90,000 and 35,000 mg/l in the initial leachate; howevermore » the succeeding concentrations dropped markedly during the course of the experiment. A computer program was utilized to predict equilibrium concentrations in the leachate from the column. The extent of leaching and erosion of spent shale and the composition and concentration of natural drainage from spent shale have been determined using oil shale residue and simulated rainfall. Concentrations in the runoff from the spent shale have been correlated with runoff rate, precipitation intensity, flow depth, application time, slope, and water temperature. 18 tables, 32 figures.« less

Evaluation of an Infiltration Model with Microchannels

NASA Astrophysics Data System (ADS)

Garcia-Serrana, M.; Gulliver, J. S.; Nieber, J. L.

2015-12-01

This research goal is to develop and demonstrate the means by which roadside drainage ditches and filter strips can be assigned the appropriate volume reduction credits by infiltration. These vegetated surfaces convey stormwater, infiltrate runoff, and filter and/or settle solids, and are often placed along roads and other impermeable surfaces. Infiltration rates are typically calculated by assuming that water flows as sheet flow over the slope. However, for most intensities water flow occurs in narrow and shallow micro-channels and concentrates in depressions. This channelization reduces the fraction of the soil surface covered with the water coming from the road. The non-uniform distribution of water along a hillslope directly affects infiltration. First, laboratory and field experiments have been conducted to characterize the spatial pattern of flow for stormwater runoff entering onto the surface of a sloped surface in a drainage ditch. In the laboratory experiments different micro-topographies were tested over bare sandy loam soil: a smooth surface, and three and five parallel rills. All the surfaces experienced erosion; the initially smooth surface developed a system of channels over time that increased runoff generation. On average, the initially smooth surfaces infiltrated 10% more volume than the initially rilled surfaces. The field experiments were performed in the side slope of established roadside drainage ditches. Three rates of runoff from a road surface into the swale slope were tested, representing runoff from 1, 2, and 10-year storm events. The average percentage of input runoff water infiltrated in the 32 experiments was 67%, with a 21% standard deviation. Multiple measurements of saturated hydraulic conductivity were conducted to account for its spatial variability. Second, a rate-based coupled infiltration and overland model has been designed that calculates stormwater infiltration efficiency of swales. The Green-Ampt-Mein-Larson assumptions were implemented to calculate infiltration along with a kinematic wave model for overland flow that accounts for short-circuiting of flow. Additionally, a sensitivity analysis on the parameters implemented in the model has been performed. Finally, the field experiments results have been used to quantify the validity of the coupled model.

Remote-controlled optics experiment for supporting senior high school and undergraduate teaching

NASA Astrophysics Data System (ADS)

Choy, S. H.; Jim, K. L.; Mak, C. L.; Leung, C. W.

2017-08-01

This paper reports the development of a remote laboratory (RemoteLab) platform for practising technologyenhanced learning of optics. The development of RemoteLab enhances students' understanding of experimental methodologies and outcomes, and enable students to conduct experiments everywhere at all times. While the initial goal of the system was for physics major undergradutes, the sytem was also made available for senior secondary school students. To gauge the impact of the RemoteLab, we evaluated two groups of students, which included 109 physics 1st-year undergraduates and 11 students from a local secondary school. After the experiments, evaluation including questionnaire survey and interviews were conducted to collect data on students' perceptions on RemoteLab and implementation issues related to the platform. The surveys focused on four main topics, including user interface, experiment setup, booking system and learning process. The survey results indicated that most of the participants' views towards RemoteLab was positive.

Logjam Deformation: Experimental analogs with variable flow

NASA Astrophysics Data System (ADS)

Deshpande, N.; Crosby, B. T.

2017-12-01

Observed deformation of a massive, channel-spanning logjam in Big Creek, Idaho inspired a suite of physical experiments exploring logjam kinematics in a simplified but controlled setting. Using chopsticks as surrogates for logs, we conducted experiments in a 6 m long and 1.22 m wide channel with a semi-circular, textured bed. Nails driven into the bed restrain the chopsticks and initialize logjam formation. We conducted 24 hour experiments hours under two discharge conditions: (A) constant base discharge and (B) alternating discharge between the base flow and a doubled flow. After initial stabilization, we use high-resolution down-looking photographs at one-minute intervals to construct time-lapse videos and for Particle Image Velocimetry. Despite identical experimental protocols during stabilization, the starting configuration of chopsticks is markedly different for each run. In Experiment A, the orientations and packing of chopsticks is visibly less ordered than Experiment B. However, deformation in both experiments is accomplished by the same three mechanisms: rigid blocks that propagate downstream as v-shaped fronts bounded by shear planes, logjam-wide adjustments in response to the change in position of a key member, and independent logs whose trajectories either travel underneath the logjam or adjust unbounded in the backwater. Total compression is 46% and 80% for experiment A and B, respectively. Time-series of incremental displacements for both experiments decrease noisily over time, but zero displacement is never reached. Despite very different hydrologic forcings, cumulative rates of deformation for both experiments are similar, suggesting that the progressive deformation of disordered, elongate particles (chopsticks and logs) within a larger ensemble leads to denser packing, and that this mechanism best describes logjam deformation.

Learning at Transition for New and Experienced Staff

ERIC Educational Resources Information Center

Milligan, Colin; Margaryan, Anoush; Littlejohn, Allison

2013-01-01

Purpose: This study aims to improve the understanding of the learning and development that occurs during initial and subsequent role transitions within knowledge intensive workplaces. Design/methodology/approach: Semi-structured interviews were conducted with 19 knowledge workers in a multinational company and the learning experiences of new…

Reflection Matrix Method for Controlling Light After Reflection From a Diffuse Scattering Surface

DTIC Science & Technology

2016-12-22

reflective inverse diffusion, which was a proof-of-concept experiment that used phase modulation to shape the wavefront of a laser causing it to refocus...after reflection from a rough surface. By refocusing the light, reflective inverse diffusion has the potential to eliminate the complex radiometric model...photography. However, the initial reflective inverse diffusion experiments provided no mathematical background and were conducted under the premise that the

Biodegradation of PAHs in Soil: Influence of Initial PAHs Concentration

NASA Astrophysics Data System (ADS)

Kamil, N. A. F. M.; Talib, S. A.

2016-07-01

Most studies on biodegradation of Polycyclic Aromatic Hydrocarbons (PAHs) evaluate the effect of initial PAHs concentration in liquid medium. There are limited studies on evaluation in solid medium such as contaminated soil. This study investigated the potential of the bacteria, Corynebacterium urealyticum isolated from municipal sludge in degrading phenanthrene contaminated soil in different phenanthrene concentration. Batch experiments were conducted over 20 days in reactors containing artificially contaminated phenanthrene soil at different concentration inoculated with a bacterial culture. This study established the optimum condition for phenanthrene degradation by the bacteria under nonindigenous condition at 500 mg/kg of initial phenanthrene concentration. High initial concentration required longer duration for biodegradation process compared to low initial concentration. The bacteria can survive for three days for all initial phenanthrene concentrations.

Effects of priming self-construals on self-evaluations: Cultural game player perspective.

PubMed

Kim, Jungsik; Song, Eugene; Takemoto, Timothy

2016-12-01

This study examined the validity of situational view on culture-specific behaviours focusing on self-evaluation. Two experiments with American students as samples were conducted to examine whether priming their self-construals would affect individuals' self-evaluation. In Experiment 1, the participants' self-evaluation was compared across different conditions of primed self-contruals. In Experiment 2, the participants were split into 2 groups based on their initial default self-consturals and, the self-evaluations were compared across the 2 groups after priming self-contruals. The results demonstrated that although the participants' self-evaluation was initially in accord with their default self-construal, it changed into accord with the primed self-construals. The findings supported the proposed cultural game player view. Implications on situational view of self-evaluation are also discussed. © 2015 International Union of Psychological Science.

H_Hyd_Shktub_Mshock_III, JJJ, KKK (S01,S02,S03) on the National Ignition Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Desjardins, Tiffany; Schmidt, Derek William; Di Stefano, Carlos

2017-12-15

These experiments are the first experiments in the Mshock campaign at the National Ignition Facility. The experiment is scheduled to be conducted on Dec. 14, 2017. The goal of the Mshock campaign is to study feedthrough dynamics of the Richtmyer- Meshkov instability in a thin layer. These dynamics will be studied in both a reshock configuration (initially) and then in a multi-shock configuration where it is planned to reshock the RM instability up to 3 times (four shocks total).

Reduction and analysis of data from cosmic dust experiments on Mariner 4, OGO 3, and Lunar Explorer 35

NASA Technical Reports Server (NTRS)

1974-01-01

The analysis of data from the cosmic dust experiment on three NASA missions is discussed. These missions were Mariner IV, OGO III, and Lunar Explorer 35. The analysis effort has included some work in the laboratory of the physics of microparticle hypervelocity impact. This laboratory effort was initially aimed at the calibration and measurements of the different sensors being used in the experiment. The latter effort was conducted in order to better understand the velocity and mass distributions of the picogram sized ejecta particles.

Impact of organizational factors on adherence to laboratory testing protocols in adult HIV care in Lusaka, Zambia.

PubMed

Deo, Sarang; Topp, Stephanie M; Westfall, Andrew O; Chiko, Matimbo M; Wamulume, Chibesa S; Morris, Mary; Reid, Stewart

2012-05-02

Previous operational research studies have demonstrated the feasibility of large-scale public sector ART programs in resource-limited settings. However, organizational and structural determinants of quality of care have not been studied. We estimate multivariate regression models using data from 13 urban HIV treatment facilities in Zambia to assess the impact of structural determinants on health workers' adherence to national guidelines for conducting laboratory tests such as CD4, hemoglobin and liver function and WHO staging during initial and follow-up visits as part of Zambian HIV care and treatment program. CD4 tests were more routinely ordered during initial history and physical (IHP) than follow-up (FUP) visits (93.0 % vs. 85.5 %; p < 0.01). More physical space, higher staff turnover and greater facility experience with ART was associated with greater odds of conducting tests. Higher staff experience decreased the odds of conducting CD4 tests in FUP (OR 0.93; p < 0.05) and WHO staging in IHP visit (OR 0.90; p < 0.05) but increased the odds of conducting hemoglobin test in IHP visit (OR 1.05; p < 0.05). Higher staff burnout increased the odds of conducting CD4 test during FUP (OR 1.14; p < 0.05) but decreased the odds of conducting hemoglobin test in IHP visit (0.77; p < 0.05) and CD4 test in IHP visit (OR 0.78; p < 0.05). Physical space plays an important role in ensuring high quality care in resource-limited setting. In the context of protocolized care, new staff members are likely to be more diligent in following the protocol verbatim rather than relying on memory and experience thereby improving adherence. Future studies should use prospective data to confirm the findings reported here.

Water flow algorithm decision support tool for travelling salesman problem

NASA Astrophysics Data System (ADS)

Kamarudin, Anis Aklima; Othman, Zulaiha Ali; Sarim, Hafiz Mohd

2016-08-01

This paper discuss about the role of Decision Support Tool in Travelling Salesman Problem (TSP) for helping the researchers who doing research in same area will get the better result from the proposed algorithm. A study has been conducted and Rapid Application Development (RAD) model has been use as a methodology which includes requirement planning, user design, construction and cutover. Water Flow Algorithm (WFA) with initialization technique improvement is used as the proposed algorithm in this study for evaluating effectiveness against TSP cases. For DST evaluation will go through usability testing conducted on system use, quality of information, quality of interface and overall satisfaction. Evaluation is needed for determine whether this tool can assists user in making a decision to solve TSP problems with the proposed algorithm or not. Some statistical result shown the ability of this tool in term of helping researchers to conduct the experiments on the WFA with improvements TSP initialization.

THYROID AXIS INHIBITION IN XENOPUS LAEVIS: DEVELOPMENT OF AN AMPHIBIAN-BASED SCREENING ASSAY FOR THYROID DISRUPTION

EPA Science Inventory

In response to the initial EDSTAC recommendations, research was conducted on the development of a Xenopus laevis based tail resorption assay for evaluating thyroid axis disruption. These experiments highlighted key limitations associated with reliance on tail resorption as a meas...

The Importance of Having a Ph.D., Career Advice

USDA-ARS?s Scientific Manuscript database

A presentation on the importance of having a PhD to motivate Initiative to Maximize Student Diversity Program (IMSD) undergrads towards conducting research, pursuing careers in the biomedical field, applying to grad school, and getting a Ph.D., based upon ARS scientist's experiences as a student, a ...

Performance of color-dependent tasks of air traffic control specialists as a function of type and degree of color vision deficiency.

DOT National Transportation Integrated Search

1992-08-01

This experiment was conducted to expand initial efforts to validate the requirement for normal color vision in Air Traffic Control Specialist (ATCS) personnel who work at en route center, terminal, and flight service station facilities. An enlarged d...

Applicability of initial optimal maternal and fetal electrocardiogram combination vectors to subsequent recordings

NASA Astrophysics Data System (ADS)

Yan, Hua-Wen; Huang, Xiao-Lin; Zhao, Ying; Si, Jun-Feng; Liu, Tie-Bing; Liu, Hong-Xing

2014-11-01

A series of experiments are conducted to confirm whether the vectors calculated for an early section of a continuous non-invasive fetal electrocardiogram (fECG) recording can be directly applied to subsequent sections in order to reduce the computation required for real-time monitoring. Our results suggest that it is generally feasible to apply the initial optimal maternal and fetal ECG combination vectors to extract the fECG and maternal ECG in subsequent recorded sections.

Experimental analysis of quasi-static and dynamic fracture initiation toughness of gy4 armor steel material

NASA Astrophysics Data System (ADS)

Ren, Peng; Guo, Zitao

Quasi-static and dynamic fracture initiation toughness of gy4 armour steel material are investigated using three point bend specimen. The modified split Hopkinson pressure bar (SHPB) apparatus with digital image correlation (DIC) system is applied to dynamic loading experiments. Full-field deformation measurements are obtained by using DIC to elucidate on the strain fields associated with the mechanical response. A series of experiments are conducted at different strain rate ranging from 10-3 s-1 to 103 s-1, and the loading rate on the fracture initiation toughness is investigated. Specially, the scanning electron microscope imaging technique is used to investigate the fracture failure micromechanism of fracture surfaces. The gy4 armour steel material fracture toughness is found to be sensitive to strain rate and higher for dynamic loading as compared to quasi-static loading. This work is supported by National Nature Science Foundation under Grant 51509115.

Space Radiation Program Element Tissue Sharing Initiative

NASA Technical Reports Server (NTRS)

Wu, H.; Huff, J. L.; Simonsen, L. C.

2014-01-01

Over the years, a large number of animal experiments have been conducted at the NASA Space Radiation Laboratory and other facilities under the support of the NASA Space Radiation Program Element (SRPE). Studies using rodents and other animal species to address the space radiation risks will remain a significant portion of the research portfolio of the Element. In order to maximize scientific return of the animal studies, SRPE is taking the initiative to promote tissue sharing among the scientists in the space radiation research community. This initiative is enthusiastically supported by the community members as voiced in the responses to a recent survey. For retrospective tissue samples, an online platform will be established for the PIs to post a list of the available samples, and to exchange information with the potential recipients. For future animal experiments, a tissue sharing policy is being developed by SRPE.

Laboratory hydraulic fracturing experiments in intact and pre-fractured rock

USGS Publications Warehouse

Zoback, M.D.; Rummel, F.; Jung, R.; Raleigh, C.B.

1977-01-01

Laboratory hydraulic fracturing experiments were conducted to investigate two factors which could influence the use of the hydrofrac technique for in-situ stress determinations; the possible dependence of the breakdown pressure upon the rate of borehole pressurization, and the influence of pre-existing cracks on the orientation of generated fractures. The experiments have shown that while the rate of borehole pressurization has a marked effect on breakdown pressures, the pressure at which hydraulic fractures initiate (and thus tensile strength) is independent of the rate of borehole pressurization when the effect of fluid penetration is negligible. Thus, the experiments indicate that use of breakdown pressures rather than fracture initiation pressures may lead to an erroneous estimate of tectonic stresses. A conceptual model is proposed to explain anomalously high breakdown pressures observed when fracturing with high viscosity fluids. In this model, initial fracture propagation is presumed to be stable due to large differences between the borehole pressure and that within the fracture. In samples which contained pre-existing fractures which were 'leaky' to water, we found it possible to generate hydraulic fractures oriented parallel to the direction of maximum compression if high viscosity drilling mud was used as the fracturing fluid. ?? 1977.

Crossing the gender boundaries: The gender experiences of male nursing students in initial nursing clinical practice in Taiwan.

PubMed

Liu, Hsing-Yuan; Li, Yun Ling

2017-11-01

The initial nursing clinical practice is the necessary practicum required for nursing students. Because of the changing learning style, many of them are under great pressure for environmental change and therefore their daily routine is severe affected. Interacting directly with patients in a female-dominated occupation, along with the general gender stereotypes, the impact is especially significant to male nursing students than to female nursing students. The purpose of this preliminary qualitative study is to explore the gendered experiences of male nursing students during their first initial nursing clinical practice. Both focus group interviews and individual interviews are conducted with twenty-two sophomore nursing students from a university of technology in northern Taiwan, with ten male students and twelve female students. Two main themes emerge from the gendered experiences shared by the nursing students: Gender consciousness awakening and thus maintaining masculinity, and male advantage in the learning environments. The results identify the specific gendered experiences of nursing students, providing implications for future nursing education and counseling service. Further, this study may serve to promote an active yet gender-sensitive nursing education for training nursing professionals. Published by Elsevier Ltd.

The Effects of Unmet Expectations, Satisfaction, and Commitment on the Reenlistment Intentions of First-Term Enlisted Personnel.

DTIC Science & Technology

1981-08-01

Farkas Reviewed by Robert Penn Released by 3ames F. Kelly, 3r. Commanding Officer Ia Navy Personnel Reserch and Development Center San Diego, California...conduct of quasi-experiments and true experiments in field settings. In M. D. Dunnette (Ed.) Handbook of Industrial and Organizational Psychology...of severity of initiation on liking for a group: A replication. Journal of Experimental Social Psychology, 1966, 2, 278-287. Kenny, D. A. Cross

Film condensation in a horizontal rectangular duct

NASA Technical Reports Server (NTRS)

Lu, Qing; Suryanarayana, N. V.

1993-01-01

Condensation heat transfer in a horizontal rectangular duct was experimentally and analytically investigated. To prevent the dripping of condensate on the film, the experiment was conducted inside a horizontal rectangular duct with vapor condensing only on the bottom cooled plate of the duct. R-113 and FC-72 (Fluorinert Electronic Fluid developed by the 3M Company) were used as the condensing fluids. The experimental program included measurements of film thickness, local and average heat transfer coefficients, wave length, wave speed, and a study of wave initiation. The measured film thickness was used to obtain the local heat transfer coefficient. The wave initiation was studied both with condensation and with an adiabatic air-liquid flow. The test sections used in both experiments were identical.

Thermal conductance measurements of bolted copper joints for SuperCDMS

DOE PAGES

Schmitt, R. L.; Tatkowski, G.; Ruschman, M.; ...

2015-04-28

Joint thermal conductance testing has been undertaken for bolted copper to copper connections from 60 mK to 26 K. This testing was performed to validate an initial design basis for the SuperCDMS experiment, where a dilution refrigerator will be coupled to a cryostat via multiple bolted connections. Copper used during testing was either gold plated or passivated with citric acid to prevent surface oxidation. Finally, the results we obtained are well fit by a power law regression of joint thermal conductance to temperature and match well with data collected during a literature review.

Characterization of Hypervelocity Metal Fragments for Explosive Initiation

NASA Astrophysics Data System (ADS)

Yeager, John; Bowden, Patrick; Guildenbecher, Daniel; Olles, Joseph

2017-06-01

The off-normal detonation behavior of two plastic-bonded explosive (PBX) formulations was studied using explosively-driven aluminum fragments moving at hypersonic velocity. Witness plate materials, including copper and polycarbonate, were used to characterize the distribution of particles, finding that the aluminum did not fragment homogeneously but rather with larger particles in a ring surrounding finer particles. Digital holography experiments were conducted to measure three-dimensional shape and size of the fastest-moving fragments, which ranged between 100 and 700 microns and traveled between 2 and 3.5 km/s. Crucially, these experiments showed variability in the fragmentation in terms of the number of fragments at the leading edge of the fragment field, indicating that both single and multiple shock impacts could be imparted to the target material. Lower density PBX 9407 (RDX-based) was initiable at up to 4.5 inches, while higher density PBX 9501 (HMX-based) was only initiable at up to 0.25 inches. This type of data is critical for safety experiments and hydrocode simulations to quantify shock-to-detonation transition mechanisms and the associated risk-margins for these materials.

Experimental investigation of infiltration in soil with occurrence of preferential flow and air trapping

NASA Astrophysics Data System (ADS)

Snehota, Michal; Jelinkova, Vladimira; Sacha, Jan; Cislerova, Milena

2015-04-01

Recently, a number of infiltration experiments have not proved the validity of standard Richards' theory of the flow in soils with wide pore size distribution. Water flow in such soils under near-saturated conditions often exhibits preferential flow and temporal instability of the saturated hydraulic conductivity. An intact sample of coarse sandy loam from Cambisol series containing naturally developed vertically connected macropore was investigated during recurrent ponding infiltration (RPI) experiments conducted during period of 30 hours. RPI experiment consisted of two ponded infiltration runs, each followed by free gravitational draining of the sample. Three-dimensional neutron tomography (NT) image of the dry sample was acquired before the infiltration begun. The dynamics of the wetting front advancement was investigated by a sequence of neutron radiography (NR) images. Analysis of NR showed that water front moved preferentially through the macropore at the approximate speed of 2 mm/sec, which was significantly faster pace than the 0.3 mm/sec wetting advancement in the surrounding soil matrix. After the water started to flow out of the sample, changes in the local water content distribution were evaluated quantitatively by subtracting the NT image of the dry sample from subsequent tomography images. As a next stage, the experiment was repeated on a composed sample packed of ceramic and coarse sand. Series of infiltration runs was conducted in the sample with different initial water contents. The neutron tomography data quantitatively showed that both in natural soil sample containing the macropore and in the composed sample air was gradually transported from the region of fine soil matrix to the macropores or to the coarser material. The accumulation of the air bubbles in the large pores affected the hydraulic conductivity of the sample reducing it up to 50% of the initial value. This supports the hypothesis on strong influence of entrapped air amount and spatial distribution on infiltration into heterogeneous soils. The research was supported by the Czech Science Foundation Project No. 14-03691S.

Viewing-position effects in the Stroop task: Initial fixation position modulates Stroop effects in fully colored words.

PubMed

Perret, Patrick; Ducrot, Stéphanie

2010-08-01

In two experiments that we conducted with adult (Experiment 1) and child (Experiment 2) participants, we experimentally controlled the eyes' first fixation in the word using a variable viewing-position technique in a classical all-letter-coloring Stroop procedure. We explored the impact of initial-fixation position (optimal viewing position [OVP] vs. end of the word) on the magnitude of Stroop effects (both interference and facilitation). The results showed that both interference and facilitation effects were reduced when the first fixation was located at the end of the word rather than at the OVP. These data make a new contribution to the study of the role of low-level processes in Stroop effects and add support to the growing body of research indicating that oculomotor processes can act as moderators of cognitive processes in the determination of Stroop effects.

Cracking process of Fe-26Cr-1Mo during low cycle corrosion fatigue

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, J.Q.; Li, J.; Wang, Z.F.

1994-12-01

The corrosion fatigue (CF) life has been divided classically into the initiation'' and propagation'' periods. Usually, the crack initiation process dominates the component lifetime under the low cycle CF condition because the crack propagates rapidly one initiated. Despite much work done on the research of the CF crack initiation mechanisms, however, a full understanding of crack initiation is still lacking. There are some limitations in explaining the CF crack initiation in an aqueous solution using the above four mechanisms individually. And, it is difficult to conduct experiments in which one mechanism along can be examined. Although CF is complicated, itmore » is possible to reproduce a specific experiment condition which will have the dominant factor affecting the CF crack initiation. Once the cracks initiate on the smooth metal surface, their coalescence, micropropagation and macropropagation will take place successively. The initiated cracks propagate first in the range of several grains, and the behavior of the microcrack propagation is different from that of macrocrack propagation. For Fe-26Cr-1Mo ferritic stainless steel, the fundamental research work of straining electrode has been done by many investigators, but the observation of the material surface at different deformation processes has not been reported. In the present study, the detailed observation of the cracking process of the material has been carried out in low cycle CF.« less

Status of the NOAO evaluation of the Hughes 20x64 Si:As impurity band conduction array. [for ground and space-based astronomy

NASA Technical Reports Server (NTRS)

Fowler, A. M.; Joyce, R. R.

1990-01-01

The Hughes 20 x 64 Si:As impurity band conduction arrays designed for ground-based and spaceborne astronomy observations is described together with experiments performed at NOAO to test these arrays. Special attention is given to the design and the characteristics of the test system and to the test methods. The initial tests on two columns of one array indicate that the array is easy to operate and performed satisfactorily.

Friction and wear of plasma-deposited diamond films

NASA Technical Reports Server (NTRS)

Miyoshi, Kazuhisa; Wu, Richard L. C.; Garscadden, Alan; Barnes, Paul N.; Jackson, Howard E.

1993-01-01

Reciprocating sliding friction experiments in humid air and in dry nitrogen and unidirectional sliding friction experiments in ultrahigh vacuum were conducted with a natural diamond pin in contact with microwave-plasma-deposited diamond films. Diamond films with a surface roughness (R rms) ranging from 15 to 160 nm were produced by microwave-plasma-assisted chemical vapor deposition. In humid air and in dry nitrogen, abrasion occurred when the diamond pin made grooves in the surfaces of diamond films, and thus the initial coefficients of friction increased with increasing initial surface roughness. The equilibrium coefficients of friction were independent of the initial surface roughness of the diamond films. In vacuum the friction for diamond films contacting a diamond pin arose primarily from adhesion between the sliding surfaces. In these cases, the initial and equilibrium coefficients of friction were independent of the initial surface roughness of the diamond films. The equilibrium coefficients of friction were 0.02 to 0.04 in humid air and in dry nitrogen, but 1.5 to 1.8 in vacuum. The wear factor of the diamond films depended on the initial surface roughness, regardless of environment; it increased with increasing initial surface roughness. The wear factors were considerably higher in vacuum than in humid air and in dry nitrogen.

Definition of common support equipment and space station interface requirements for IOC model technology experiments

NASA Technical Reports Server (NTRS)

Russell, Richard A.; Waiss, Richard D.

1988-01-01

A study was conducted to identify the common support equipment and Space Station interface requirements for the IOC (initial operating capabilities) model technology experiments. In particular, each principal investigator for the proposed model technology experiment was contacted and visited for technical understanding and support for the generation of the detailed technical backup data required for completion of this study. Based on the data generated, a strong case can be made for a dedicated technology experiment command and control work station consisting of a command keyboard, cathode ray tube, data processing and storage, and an alert/annunciator panel located in the pressurized laboratory.

Functional Allocation with Airborne Self-Separation Evaluated in a Piloted Simulation

NASA Technical Reports Server (NTRS)

Wing, David J.; Murdoch, Jennifer L.; Chamberlain, James P.; Consiglio, Maria C.; Hoardley, Sherwood T.; Hubbs, Clay E.; Palmer, Michael T.

2010-01-01

A human-in-the-loop simulation experiment was designed and conducted to evaluate an airborne self-separation concept. The activity supports the National Aeronautics and Space Administration s (NASA) research focus on function allocation for separation assurance. The objectives of the experiment were twofold: (1) use experiment design features in common with a companion study of ground-based automated separation assurance to promote comparability, and (2) assess agility of self-separation operations in managing trajectory-changing events in high traffic density, en-route operations with arrival time constraints. This paper describes the experiment and presents initial results associated with subjective workload ratings and group discussion feedback obtained from the experiment s commercial transport pilot participants.

Integrated electrokinetics-adsorption remediation of saline-sodic soils: effects of voltage gradient and contaminant concentration on soil electrical conductivity.

PubMed

Essa, Mohammed Hussain; Mu'azu, Nuhu Dalhat; Lukman, Salihu; Bukhari, Alaadin

2013-01-01

In this study, an integrated in situ remediation technique which couples electrokinetics with adsorption, using locally produced granular activated carbon from date palm pits in the treatment zones that are installed directly to bracket the contaminated soils at bench-scale, is investigated. Natural saline-sodic clay soil, spiked with contaminant mixture (kerosene, phenol, Cr, Cd, Cu, Zn, Pb, and Hg), was used in this study to investigate the effects of voltage gradient, initial contaminant concentration, and polarity reversal rate on the soil electrical conductivity. Box-Behnken Design (BBD) was used for the experimental design and response surface methodology (RSM) was employed to model, optimize, and interpret the results obtained using Design-Expert version 8 platform. The total number of experiments conducted was 15 with voltage gradient, polarity reversal rate, and initial contaminant concentration as variables. The main target response discussed in this paper is the soil electrical conductivity due to its importance in electrokinetic remediation process. Responses obtained were fitted to quadratic models whose R (2) ranges from 84.66% to 99.19% with insignificant lack of fit in each case. Among the investigated factors, voltage gradient and initial contaminant concentration were found to be the most significant influential factors.

Vietnamese Amerasians: Practical Implications of Current Research.

ERIC Educational Resources Information Center

Felsman, J. Kirk.; And Others

This study was conducted to examine the experiences of Amerasians from Vietnam who resettled in the United States and to explore coping and adaptation among Vietnamese Amerasians over time. The initial data collection phase involved in-camp assessment of a randomly selected sample of Amerasian adolescents (N=259). The assessment is to be repeated…

Mindstorms Robots and the Application of Cognitive Load Theory in Introductory Programming

ERIC Educational Resources Information Center

Mason, Raina; Cooper, Graham

2013-01-01

This paper reports on a series of introductory programming workshops, initially targeting female high school students, which utilised Lego Mindstorms robots. Cognitive load theory (CLT) was applied to the instructional design of the workshops, and a controlled experiment was also conducted investigating aspects of the interface. Results indicated…

Do Interim Assessments Reduce the Race and SES Achievement Gaps?

ERIC Educational Resources Information Center

Konstantopoulos, Spyros; Li, Wei; Miller, Shazia R.; van der Ploeg, Arie

2017-01-01

The authors examined differential effects of interim assessments on minority and low socioeconomic status students' achievement in Grades K-6. They conducted a large-scale cluster randomized experiment in 2009-2010 to evaluate the impact of Indiana's policy initiative introducing interim assessments statewide. The authors used 2-level models to…

Experiences of York Graduates--Two Years Later.

ERIC Educational Resources Information Center

Grayson, J. Paul

This study examined outcomes for graduates of York University (Ontario) immediately and 2 years after graduation. An initial survey was conducted at the time students graduated from the university's faculties of Arts, Fine Arts, Pure and Applied Science, and the Schulich School of Business (SSB) in the fall of 1995 and the spring of 1996. Two…

Effects of zilpaterol hydrochloride on methane production, total body oxygen consumption, and blood metabolites in finishing beef steers

USDA-ARS?s Scientific Manuscript database

An indirect calorimetry experiment was conducted to determine the effects of feeding zilpaterol hydrochloride (ZH) for 20 d on total body oxygen consumption, respiratory quotient, methane production, and blood metabolites in finishing beef steers. Sixteen Angus steers (initial BW = 555 ± 12.7 kg) w...

The Heroes' Journey: A Young Couple's Experience with Choriocarcinoma

ERIC Educational Resources Information Center

Marlowe, Dan; Hodgson, Jennifer; Lamson, Angela

2010-01-01

A 20 year retrospective qualitative case study was conducted to investigate the relational impact of choriocarcinoma (a type of gestational cancer) on a couple of child-bearing age. A unique feature to the study was that the primary investigator was the couple's biological son, initiating the first known auto-case study design. Using holistic…

Judging Attraction from Nonverbal Behavior: The Gain Phenomenon

ERIC Educational Resources Information Center

Clore, Gerald L.; And Others

1975-01-01

Describes two experiments conducted to explore non-verbal behaviors and their capacity to convey attraction between men and women. Examines in particular the gain phenomenon which is the idea that people are more attracted to a person who is initially punishing and then rewarding than to one who is always rewarding. (Author/EJT)

INTEGRATION OF STIMULUS CUES BY NORMAL AND MENTALLY RETARDED CHILDREN. FINAL REPORT.

ERIC Educational Resources Information Center

ELAM, CLAUDE B.

TWO EXPERIMENTS WERE CONDUCTED IN ORDER TO OBTAIN A MATHEMATICAL DESCRIPTION OF THE PERCEPTUAL PROCESS BY WHICH NORMAL AND MENTALLY RETARDED SUBJECTS SYNTHESIZE STIMULUS CUES IN PERCEPTUAL IDENTIFICATION. THE INITIAL STUDY EMPLOYED 50 COLLEGE STUDENTS, 34 GRADE SCHOOL STUDENTS, AND 24 MENTALLY RETARDED CHILDREN (AGES 9-16) AS SUBJECTS. THE…

Explore: An Action to Bring Science and Technology Closer to Secondary School

ERIC Educational Resources Information Center

Torras-Melenchon, Nuria; Grau, M. Dolors; Font-Soldevila, Josep; Freixas, Josep

2015-01-01

This paper presents the experience of an initiative, the EXPLORE courses, designed to bring science and technology closer to secondary school. The EXPLORE courses, organised by "EXPLORATORI: Natural Resources" project, are particularly addressed to secondary school teachers and are conducted at Catalonia (North East of Spain). The main…

Non-isothermal infiltration and tracer transport experiments on large soil columns

NASA Astrophysics Data System (ADS)

Sobotkova, Martina; Snehota, Michal; Cejkova, Eva; Tesar, Miroslav

2016-04-01

Isothermal and non-isothermal infiltration experiments were carried out in the laboratory on large undisturbed soil columns (19 cm in diameter, 25 cm high) taken at the experimental catchments Roklan (Sumava Mountains, Czech Republic) and Uhlirska (Jizera Mountains, Czech republic). The aim of the study was twofold. The first goal was to obtain water flow and heat transport data for indirect parameter estimation of thermal and hydraulic properties of soils from two sites by inverse modelling. The second aim was to investigate the extent of impact of the temperature on saturated hydraulic conductivity (Ksat) and dispersity of solute transport. The temperature of infiltrating water in isothermal experiment (20 °C) was equal to the initial temperature of the sample. For non-isothermal experiment water temperature was 5°C, while the initial temperature of the sample was 20°C as in previous case. The experiment was started by flooding the sample surface. Then water level was maintained at constant level throughout the infiltration run using the optical sensor and peristaltic pump. Concentration pulse of deuterium was applied at the top of the soil sample, during the steady state flow. Initial pressure head in the sample was close to field capacity. Two tensiometers and two temperature sensors were inserted in the soil sample in two depths (9 and 15 cm below the top of the sample). Two additional temperature sensors monitored the temperature entering and leaving the samples. Water drained freely through the perforated plate at the bottom of sample by gravity. Inflow and outflow water flux densities, water pressure heads and soil temperatures were monitored continuously during experiments. Effluent was sampled in regular time intervals and samples were analysed for deuterium concentrations by laser spectroscopy to develop breakthrough curves. The outcome of experiments are the series of measured water fluxes, pressure heads and temperatures ready for inverse modelling by dual permeability. The saturated hydraulic conductivity of soil columns was higher in the case of higher temperature of flowing water. The change was however not proportional to Ksat change induced by temperature change of viscosity only.

Overview of experiment design and comparison of models participating in phase 1 of the SPARC Quasi-Biennial Oscillation initiative (QBOi)

NASA Astrophysics Data System (ADS)

Butchart, Neal; Anstey, James A.; Hamilton, Kevin; Osprey, Scott; McLandress, Charles; Bushell, Andrew C.; Kawatani, Yoshio; Kim, Young-Ha; Lott, Francois; Scinocca, John; Stockdale, Timothy N.; Andrews, Martin; Bellprat, Omar; Braesicke, Peter; Cagnazzo, Chiara; Chen, Chih-Chieh; Chun, Hye-Yeong; Dobrynin, Mikhail; Garcia, Rolando R.; Garcia-Serrano, Javier; Gray, Lesley J.; Holt, Laura; Kerzenmacher, Tobias; Naoe, Hiroaki; Pohlmann, Holger; Richter, Jadwiga H.; Scaife, Adam A.; Schenzinger, Verena; Serva, Federico; Versick, Stefan; Watanabe, Shingo; Yoshida, Kohei; Yukimoto, Seiji

2018-03-01

The Stratosphere-troposphere Processes And their Role in Climate (SPARC) Quasi-Biennial Oscillation initiative (QBOi) aims to improve the fidelity of tropical stratospheric variability in general circulation and Earth system models by conducting coordinated numerical experiments and analysis. In the equatorial stratosphere, the QBO is the most conspicuous mode of variability. Five coordinated experiments have therefore been designed to (i) evaluate and compare the verisimilitude of modelled QBOs under present-day conditions, (ii) identify robustness (or alternatively the spread and uncertainty) in the simulated QBO response to commonly imposed changes in model climate forcings (e.g. a doubling of CO2 amounts), and (iii) examine model dependence of QBO predictability. This paper documents these experiments and the recommended output diagnostics. The rationale behind the experimental design and choice of diagnostics is presented. To facilitate scientific interpretation of the results in other planned QBOi studies, consistent descriptions of the models performing each experiment set are given, with those aspects particularly relevant for simulating the QBO tabulated for easy comparison.

The Mini-Earth facility and present status of habitation experiment program.

PubMed

Nitta, Keiji

2005-01-01

The history of construction of the CEEF (the Mini-Earth), the configuration and scale of the CEEF are initially described. The effective usable areas in plant cultivation and animal holding and habitation modules and the accommodation equipment installed in each module are also explained. Mechanisms of the material circulation systems belonging to each module and subsystems in each material circulation system are introduced. Finally the results of pre-habitation experiments conducted until the year 2004 for clarifying the requirements in order to promote final closed habitation experiments are shown. c2005 Published by Elsevier Ltd on behalf of COSPAR.

Overcoming practical challenges to conducting clinical research in the inpatient stroke rehabilitation setting.

PubMed

Campbell, Grace B; Skidmore, Elizabeth R; Whyte, Ellen M; Matthews, Judith T

2015-10-01

There is a shortage of published empirical studies conducted in acute inpatient stroke rehabilitation, though such studies are greatly needed in order to shed light on the most efficacious inpatient stroke rehabilitation interventions. The inherent challenges of inpatient research may dissuade researchers from undertaking this important work. This paper describes our institution's experience devising practical solutions to research barriers in this setting. Through concentrated efforts to overcome research barriers, such as by cultivating collaborative relationships and capitalizing on unanticipated benefits, we successfully facilitated conduct of five simultaneous inpatient stroke studies. Tangible benefits realized include increased effectiveness of research participant identification and enrollment, novel collaborative projects, innovative clinical care initiatives, and enhanced emotional and practical support for patients and their families. We provide recommendations based on lessons learned during our experience, and discuss benefits of this collaboration for our research participants, clinical staff, and the research team.

Structural tests on space shuttle thermal protection system constructed with nondensified and densified Li 900 and LI 2200 tile

NASA Technical Reports Server (NTRS)

Williams, J. G.

1981-01-01

Structural tests were conducted on thermal protection systems (TPS) LI 900 and LI 2200 tiles and .41 cm and .23 cm thick strain isolation pads. The bond surface of selected tiles was densified to obtain improved strength. Four basic types of experiments were conducted including tension tests, substrate mismatch (initial imperfection) tests, tension loads eccentrically applied, and pressure loads applied rapidly to the tile top surface. A small initial imperfection mismatch (2.29 m spherical radius on the substrate) did not influence significantly the ultimate failure strength. Densification of the tile bond region improved the strength of TPS constructed both of LI 900 tile and of LI 2200 tile. Pressure shock conditions studied did not significantly affect the TPS strength.

Reaching for the Stars in your Golden Years: The Importance of Outreach for Senior Citizens

NASA Astrophysics Data System (ADS)

Rapson, Valerie

2015-01-01

Astronomy outreach is often conducted in science classrooms, museums, observatories, and even at the local park. The intended audiences are usually families with young children, who we are training to be the next generation of scientists, inventors and world-changers. Science outreach is rarely geared towards senior citizens, and yet this group can be the most receptive audience, willing to share past experiences and engage in learning. Educating our seniors about astronomy, especially current discoveries, upcoming technology, and funding challenges, is of the utmost importance. Here, I share my experience conducting astronomy outreach at senior living communities in Rochester, NY as part of their Lifelong Learning initiative, and discuss why this type of outreach is important.

Determination of heat transfer coefficient for an interaction of sub-cooled gas and metal

NASA Astrophysics Data System (ADS)

Zaidi Sidek, Mohd; Syahidan Kamarudin, Muhammad

2016-02-01

Heat transfer coefficient (HTC) for a hot metal surface and their surrounding is one of the need be defined parameter in hot forming process. This study has been conducted to determine the HTC for an interaction between sub-cooled gas sprayed on a hot metal surface. Both experiments and finite element have been adopted in this work. Initially, the designated experiment was conducted to obtain temperature history of spray cooling process. Then, an inverse method was adopted to calculate the HTC value before we validate in a finite element simulation model. The result shows that the heat transfer coefficient for interaction of subcooled gas and hot metal surface is 1000 W/m2K.

Summary and evaluation: fuel dynamics loss-of-flow experiments (tests L2, L3, and L4)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barts, E.W.; Deitrich, L.W.; Eberhart, J.G.

1975-09-01

Three similar experiments conducted to support the analyses of hypothetical LMFBR unprotected-loss-of-flow accidents are summarized and evaluated. The tests, designated L2, L3, and L4, provided experimental data against which accident-analysis codes could be compared, so as to guide further analysis and modeling of the initiating phases of the hypothetical accident. The tests were conducted using seven-pin bundles of mixed-oxide fuel pins in Mark-II flowing-sodium loops in the TREAT reactor. Test L2 used fresh fuel. Tests L3 and L4 used irradiated fuel pins having, respectively, ''intermediate-power'' (no central void) and ''high-power'' (fully developed central void) microstructure. 12 references. (auth)

Brain lateralisation and motor learning: selective effects of dominant and non-dominant hand practice on the early acquisition of throwing skills.

PubMed

Stöckel, Tino; Weigelt, Matthias

2012-01-01

Findings from neurosciences indicate that the two brain hemispheres are specialised for the processing of distinct movement features. How this knowledge can be useful in motor learning remains unclear. Two experiments were conducted to investigate the influence of initial practice with the dominant vs non-dominant hand on the acquisition of novel throwing skills. Within a transfer design two groups practised a novel motor task with the same amount of practice on each hand, but in opposite hand-order. In Experiment 1, participants acquired the position throw in basketball, which places high demands on throwing accuracy. Participants practising this task with their non-dominant hand first, before changing to the dominant hand, showed better skill acquisition than participants practising in opposite order. In Experiment 2 participants learned the overarm throw in team handball, which requires great throwing strength. Participants initially practising with their dominant hand benefited more from practice than participants beginning with their non-dominant hand. These results indicate that spatial accuracy tasks are learned better after initial practice with the non-dominant hand, whereas initial practice with the dominant hand is more efficient for maximum force production tasks. The effects are discussed in terms of brain lateralisation and bilateral practice schedules.

Airborne High Spectral Resolution Lidar Aerosol Measurements during MILAGRO and TEXAQS/GOMACCS

NASA Technical Reports Server (NTRS)

Ferrare, Richard; Hostetler, Chris; Hair, John; Cook Anthony; Harper, David; Burton, Sharon; Clayton, Marian; Clarke, Antony; Russell, Phil; Redemann, Jens

2007-01-01

Two1 field experiments conducted during 2006 provided opportunities to investigate the variability of aerosol properties near cities and the impacts of these aerosols on air quality and radiative transfer. The Megacity Initiative: Local and Global Research Observations (MILAGRO) /Megacity Aerosol Experiment in Mexico City (MAX-MEX)/Intercontinental Chemical Transport Experiment-B (INTEX-B) joint experiment conducted during March 2006 investigated the evolution and transport of pollution from Mexico City. The Texas Air Quality Study (TEXAQS)/Gulf of Mexico Atmospheric Composition and Climate Study (GoMACCS) (http://www.al.noaa.gov/2006/) conducted during August and September 2006 investigated climate and air quality in the Houston/Gulf of Mexico region. During both missions, the new NASA Langley airborne High Spectral Resolution Lidar (HSRL) was deployed on the NASA Langley B200 King Air aircraft and measured profiles of aerosol extinction, backscattering, and depolarization to: 1) characterize the spatial and vertical distributions of aerosols, 2) quantify aerosol extinction and optical thickness contributed by various aerosol types, 3) investigate aerosol variability near clouds, 4) evaluate model simulations of aerosol transport, and 5) assess aerosol optical properties derived from a combination of surface, airborne, and satellite measurements.

Impact and collisional processes in the solar system

NASA Technical Reports Server (NTRS)

Ahrens, Thomas J.; Gazis, C.; Pepin, R.; Becker, R.; Cronin, R.; Tyburczy, J.; Tingle, T.; Duffy, T.; Rowan, L.

1991-01-01

As impact cratered terrains have been successively recognized on certain planets and planetary satellites, it has become clear that impact processes are important to the understanding of the accretion and evolution of all solid planets. The noble gases in the normalized atmospheric inventories of the planets and the normalized gas content of meteorites are grossly similar, but demonstrate differences from each other which are not understood. In order to study shock devolatilization of the candidate carrier phases which are principally thought to be carbonaceous or hydrocarbons in planetesimals, experiments were conducted on noble gase implantation in various carbons: carbon black, activated charcoal, graphite, and carbon glass. These were candidate starting materials for impact devolatilization experiments. Initial experiments were conducted on vitreous amorphous carbon samples which were synthesized under vapor saturated conditions using argon as the pressurizing medium. An amino acid and surface analysis by laser ionization analyses were performed on three samples of shocked Murchison meteorite. A first study was completed in which a series of shock loading experiments on a porous limestone and on a non-porous gabbro in one and three dimensions were performed. Also a series of recovery experiments were conducted in which shocked molten basalt a 1700 C is encapsulated in molybdenum containers and shock recovered from up to 6 GPa pressures.

An enquiry into the process of categorization of pictures and words.

PubMed

Viswanathan, Madhubalan; Childers, Terry L

2003-02-01

This paper reports a series of experiments conducted to study the categorization of pictures and words. Whereas some studies reported in the past have found a picture advantage in categorization, other studies have yielded no differences between pictures and words. This paper used an experimental paradigm designed to overcome some methodological problems to examine picture-word categorization. The results of one experiment were consistent with an advantage for pictures in categorization. To identify the source of the picture advantage in categorization, two more experiments were conducted. Findings suggest that semantic relatedness may play an important role in the categorization of both pictures and words. We explain these findings by suggesting that pictures simultaneously access both their concept and visually salient features whereas words may initially access their concept and may subsequently activate features. Therefore, pictures have an advantage in categorization by offering multiple routes to semantic processing.

U.S. Complicity and Japan's Wartime Medical Atrocities: Time for a Response.

PubMed

Devolder, Katrien

2015-01-01

Shortly before and during the Second World War, Japanese doctors and medical researchers conducted large-scale human experiments in occupied China that were at least as gruesome as those conducted by Nazi doctors. Japan never officially acknowledged the occurrence of the experiments, never tried any of the perpetrators, and never provided compensation to the victims or issued an apology. Building on work by Jing-Bao Nie, this article argues that the U.S. government is heavily complicit in this grave injustice, and should respond in an appropriate way in order to reduce this complicity, as well as to avoid complicity in future unethical medical experiments. It also calls on other U.S. institutions, in particular the Presidential Commission for the Study of Bioethical Issues, to urge the government to respond, or to at least inform the public and initiate a debate about this dark page of American and Japanese history.

Dynamic SEM wear studies of tungsten carbide cermets. [friction and wear experiments

NASA Technical Reports Server (NTRS)

Brainard, W. A.; Buckley, D. H.

1975-01-01

Dynamic friction and wear experiments were conducted in a scanning electron microscope. The wear behavior of pure tungsten carbide and composite with 6 and 15 weight percent cobalt binder was examined, and etching of the binder was done to selectively determine the role of the binder in the wear process. Dynamic experiments were conducted as the tungsten carbide (WC) and bonded WC cermet surfaces were transversed by a 50 micron radiused diamond stylus. These studies show that the predominant wear process in WC is fracture initiated by plastic deformation, and the wear of the etched cermets is similar to pure WC. The presence of the cobalt binder reduces both friction and wear. The cementing action of the cobalt reduces granular separation, and promotes a dense polished layer because of its low shear strength film-forming properties. The wear debris generated from unetched surface is approximately the same composition as the bulk.

A longitudinal evaluation of a project-based learning initiative in an engineering undergraduate programme

NASA Astrophysics Data System (ADS)

Hall, Wayne; Palmer, Stuart; Bennett, Mitchell

2012-05-01

Project-based learning (PBL) is a well-known student-centred methodology for engineering design education. The methodology claims to offer a number of educational benefits. This paper evaluates the student perceptions of the initial and second offering of a first-year design unit at Griffith University in Australia. It builds on an earlier evaluation conducted after the initial offering of the unit. It considers the implementation of the recommended changes. Evaluations of the two offerings reveal that students (in both the initial and second offering) generally enjoyed the experience, but that the second offering was found to be a significantly more enjoyable learning experience. Students in the second offering also reported a significantly better understanding of what they needed to do for the design projects and where to find the requisite information. The oral presentation aspect of the initial and second offerings received the lowest satisfaction rating. The inclusion (and delivery) of the computer-aided drawing component of the unit is seen as a positive aspect by some students, but many others comment on it negatively. The best aspects of the PBL unit and those aspects needing further improvement were similar to the findings of other investigations documented in the literature.

'Crisis' and 'everyday' initiators: A qualitative study of coercion and agency in the context of methadone maintenance treatment initiation.

PubMed

Damon, Will; Small, Will; Anderson, Solanna; Maher, Lisa; Wood, Evan; Kerr, Thomas; McNeil, Ryan

2017-03-01

Patient attrition is common among people enrolled in methadone maintenance treatment (MMT) programs and most pronounced during the first year of treatment. However, the experiences of patients initiating MMT have been overlooked in the literature. This study explores experiences of MMT initiation among MMT patients, focusing on contextual influences on MMT initiation and perceptions of MMT and their subsequent influence on treatment retention. Semi-structured qualitative interviews were conducted with 39 MMT patients in Vancouver, Canada. Individuals reporting enrolment in MMT were recruited from within two ongoing cohort studies comprised of people who use drugs. Interview transcripts were analysed using an inductive and iterative approach. Two groups of MMT initiators were identified: (i) 'crisis initiators' prescribed methadone following critical transition events, such as incarceration or pregnancy; and (ii) 'everyday initiators' enrolled in MMT as part of routine healthcare utilisation. While most 'crisis initiators' and some 'everyday initiators' described experiencing coercion during MMT initiation, 'crisis initiators' were further subjected to the coercive leveraging of their vulnerability to motivate 'consent' for MMT. 'Crisis initiators' developed negative views towards MMT and were more likely to discontinue treatment. Long-standing patient-provider relationships and open dialogue were associated with more positive views regarding MMT, regardless of the circumstances of initiation. Findings underscore the need for clear and effective communication regarding treatment regimens and expectations during MMT initiation. Furthermore, training in trauma-informed care may help reduce perceptions of coercion and rates of early treatment termination. [Damon W, Small W, Anderson S, Maher L, Wood E, Kerr T, McNeil R. Crisis' and 'everyday' initiators: A qualitative study of coercion and agency in the context of methadone maintenance treatment initiation. Drug Alcohol Rev 2017;36:253-260]. © 2016 Australasian Professional Society on Alcohol and other Drugs.

Small-scale experimental study of vaporization flux of liquid nitrogen released on water.

PubMed

Gopalaswami, Nirupama; Olewski, Tomasz; Véchot, Luc N; Mannan, M Sam

2015-10-30

A small-scale experimental study was conducted using liquid nitrogen to investigate the convective heat transfer behavior of cryogenic liquids released on water. The experiment was performed by spilling five different amounts of liquid nitrogen at different release rates and initial water temperatures. The vaporization mass fluxes of liquid nitrogen were determined directly from the mass loss measured during the experiment. A variation of initial vaporization fluxes and a subsequent shift in heat transfer mechanism were observed with changes in initial water temperature. The initial vaporization fluxes were directly dependent on the liquid nitrogen spill rate. The heat flux from water to liquid nitrogen determined from experimental data was validated with two theoretical correlations for convective boiling. It was also observed from validation with correlations that liquid nitrogen was found to be predominantly in the film boiling regime. The substantial results provide a suitable procedure for predicting the heat flux from water to cryogenic liquids that is required for source term modeling. Copyright © 2015 Elsevier B.V. All rights reserved.

The NLM Indexing Initiative's Medical Text Indexer.

PubMed

Aronson, Alan R; Mork, James G; Gay, Clifford W; Humphrey, Susanne M; Rogers, Willie J

2004-01-01

The Medical Text Indexer (MTI) is a program for producing MeSH indexing recommendations. It is the major product of NLM's Indexing Initiative and has been used in both semi-automated and fully automated indexing environments at the Library since mid 2002. We report here on an experiment conducted with MEDLINE indexers to evaluate MTI's performance and to generate ideas for its improvement as a tool for user-assisted indexing. We also discuss some filtering techniques developed to improve MTI's accuracy for use primarily in automatically producing the indexing for several abstracts collections.

Ab initio molecular dynamics simulations of the initial stages of solid-electrolyte interphase formation on lithium ion battery graphitic anodes.

PubMed

Leung, Kevin; Budzien, Joanne L

2010-07-07

The decomposition of ethylene carbonate (EC) during the initial growth of solid-electrolyte interphase (SEI) films at the solvent-graphitic anode interface is critical to lithium ion battery operations. Ab initio molecular dynamics simulations of explicit liquid EC/graphite interfaces are conducted to study these electrochemical reactions. We show that carbon edge terminations are crucial at this stage, and that achievable experimental conditions can lead to surprisingly fast EC breakdown mechanisms, yielding decomposition products seen in experiments but not previously predicted.

[Constraints and opportunities for inter-sector health promotion initiatives: a case study].

PubMed

Magalhães, Rosana

2015-07-01

This article analyzes the implementation of inter-sector initiatives linked to the Family Grant, Family Health, and School Health Programs in the Manguinhos neighborhood in the North Zone of Rio de Janeiro, Brazil. The study was conducted in 2010 and 2011 and included document review, local observation, and 25 interviews with program managers, professionals, and staff. This was an exploratory case study using a qualitative approach that identified constraints and opportunities for inter-sector health experiences, contributing to the debate on the effectiveness of health promotion and poverty relief programs.

Effects of initial saturation on properties modification and displacement of tetrachloroethene with aqueous isobutanol.

PubMed

Boyd, Glen R; Ocampo-Gómez, Ana M; Li, Minghua; Husserl, Johana

2006-11-20

Packed column experiments were conducted to study effects of initial saturation of tetrachloroethene (PCE) in the range of 1.0-14% pore volume (PV) on mobilization and downward migration of the non-aqueous phase liquid (NAPL) product upon contact with aqueous isobutanol ( approximately 10 vol.%). This study focused on the consequences of swelling beyond residual saturation. Columns were packed with mixtures of neat PCE, water and glass beads and waterflooded to establish a desired homogeneous residual saturation, and then flooded with aqueous isobutanol under controlled hydraulic conditions. Results showed a critical saturation of approximately 8% PV for these packed column experimental conditions. At low initial PCE saturations (<8% PV), experimental results showed reduced risk of NAPL-product migration upon contact with aqueous isobutanol. At higher initial PCE saturations (>8% PV), results showed NAPL-product mobilization and downward migration which was attributed to interfacial tension (IFT) reduction, swelling of the NAPL-product, and reduced density modification. Packed column results were compared with good agreement to theoretical predictions of NAPL-product mobilization using the total trapping number, N(T). In addition to the packed column study, preliminary batch experiments were conducted to study the effects of PCE volumetric fraction in the range of 0.5-20% on density, viscosity, and IFT modification as a function of time following contact with aqueous isobutanol ( approximately 10 vol.%). Modified NAPL-product fluid properties approached equilibrium within approximately 2 h of contact for density and viscosity. IFT reduction occurred immediately as expected. Measured fluid properties were compared with good agreement to theoretical equilibrium predictions based on UNIQUAC. Overall, this study demonstrates the importance of initial DNAPL saturation, and the associated risk of downward NAPL-product migration, in applying alcohol flooding for remediation of DNAPL contaminated ground water sites.

Decadal Prediction Efforts in GMAO (Global Modeling and Assimilation Office)

NASA Technical Reports Server (NTRS)

Rienecker, Michele M.; Suarez, Max; Schubert, Siegfried

2010-01-01

The Global Modeling and Assimilation Office (GMAO) plans to use our GEOS-5 atmosphere-ocean general circulation model (AOGCM) to explore issues associated with predictability on decadal time scales and to contribute to the decadal prediction project that is part ofCMIP5. The GEOS-5 AOGCM is comprised of the GEOS-5 AGCM with the Catchment Land Surface Model, coupled to GFDL's MOM, version 4. We have assimilation systems for both the atmosphere and ocean. For our climate prediction efforts, the atmosphere will be initialized from the GEOS-5 Modem Era Retrospective-analysis for Research and Applications (MERRA), available from 1979 to present at 112 resolution, and from 1948 to present at 2 resolution. The ocean assimilation is conducted within the coupled model framework, using the MERRA as a constraint for both the atmosphere and the ocean. The decadal prediction experiments will be conducted with a 1 atmosphere and a 112 ocean. Some initial results will be presented, focusing on initialization aspects of the GEOS-5 system.

Associated with aerospace vehicles development of methodologies for the estimation of thermal properties

NASA Technical Reports Server (NTRS)

Scott, Elaine P.

1994-01-01

Thermal stress analyses are an important aspect in the development of aerospace vehicles at NASA-LaRC. These analyses require knowledge of the temperature distributions within the vehicle structures which consequently necessitates the need for accurate thermal property data. The overall goal of this ongoing research effort is to develop methodologies for the estimation of the thermal property data needed to describe the temperature responses of these complex structures. The research strategy undertaken utilizes a building block approach. The idea here is to first focus on the development of property estimation methodologies for relatively simple conditions, such as isotropic materials at constant temperatures, and then systematically modify the technique for the analysis of more and more complex systems, such as anisotropic multi-component systems. The estimation methodology utilized is a statistically based method which incorporates experimental data and a mathematical model of the system. Several aspects of this overall research effort were investigated during the time of the ASEE summer program. One important aspect involved the calibration of the estimation procedure for the estimation of the thermal properties through the thickness of a standard material. Transient experiments were conducted using a Pyrex standard at various temperatures, and then the thermal properties (thermal conductivity and volumetric heat capacity) were estimated at each temperature. Confidence regions for the estimated values were also determined. These results were then compared to documented values. Another set of experimental tests were conducted on carbon composite samples at different temperatures. Again, the thermal properties were estimated for each temperature, and the results were compared with values obtained using another technique. In both sets of experiments, a 10-15 percent off-set between the estimated values and the previously determined values was found. Another effort was related to the development of the experimental techniques. Initial experiments required a resistance heater placed between two samples. The design was modified such that the heater was placed on the surface of only one sample, as would be necessary in the analysis of built up structures. Experiments using the modified technique were conducted on the composite sample used previously at different temperatures. The results were within 5 percent of those found using two samples. Finally, an initial heat transfer analysis, including conduction, convection and radiation components, was completed on a titanium sandwich structural sample. Experiments utilizing this sample are currently being designed and will be used to first estimate the material's effective thermal conductivity and later to determine the properties associated with each individual heat transfer component.

Initiation of Insensitive High Explosives Using Multiple Wave Interactions

NASA Astrophysics Data System (ADS)

Francois, Elizabeth; Burritt, Rosmary; Biss, Matt; Bowden, Patrick

2017-06-01

Insensitive High Explosives (IHEs) increase safety in many types of weapons. However, the safety comes at the cost of performance. Initiation of IHE requires large boosters and powerful detonators as well. Multipoint initiation is being utilized to exploit explosive wave interactions to create overdriven states, greatly facilitating the initiation of IHEs. This presentation will build from recent explosive experiments where the minimum spot size for single-point initiation in PBX 9502 was determined. Below this threshold, PBX 9502 could not be initiated. This was then expanded to three initiation points, which were smaller this threshold. Measurements of the velocity and pressure of the wave interactions were measured using Photon Doppler Velocimetry (PDV). Initiation was observed, and the resulting pressures at the double and triple points were found to be above the CJ state for PBX 9502. Based on these results, further tests were conducted to isolate and measure the longevity and pressure of this phenomenon using cut-back tests. All results will be presented and discussed.

Stability of nitrate-ion concentrations in simulated deposition samples used for quality-assurance activities by the U.S. Geological Survey

USGS Publications Warehouse

Willoughby, T.C.; See, R.B.; Schroder, L.J.

1989-01-01

Three experiments were conducted to determine the stability of nitrate-ion concentrations in simulated deposition samples. In the four experiment-A solutions, nitric acid provided nitrate-ion concentrations ranging from 0.6 to 10.0 mg/L and that had pH values ranging from 3.8 to 5.0. In the five experiment-B solutions, sodium nitrate provided nitrate-ion concentrations ranging from 0.5 to 3.0 mg/L. The pH was adjusted to about 4.5 for each of the solutions by addition of sulfuric acid. In the four experiment-C solutions, nitric acid provided nitrate-ion concentrations ranging from 0.5 to 3.0 mg/L. Major cation and anion concentrations were added to each solution to simulate natural deposition. Aliquots were removed from the 13 original solutions and analyzed by ion chromatography about once a week for 100 days to determine if any changes occurred in nitrate-ion concentrations throughout the study period. No substantial changes were observed in the nitrate-ion concentrations in solutions that had initial concentrations below 4.0 mg/L in experiments A and B, although most of the measured nitrate-ion concentrations for the 100-day study were below the initial concentrations. In experiment C, changes in nitrate-ion concentrations were much more pronounced; the measured nitrate-ion concentrations for the study period were less than the initial concentrations for 62 of the 67 analyses. (USGS)

Children's Conception of Price as a Function of Questions Asked.

ERIC Educational Resources Information Center

Dahlgren, Lars Owe

An experiment concerning children's conceptions of price was conducted to investigate the influence of the context of a problem on its apprehension. A total of 120 children of several age groups (nursery school, grades 2, 4, and 6) were interviewed individually. An initial question was asked ("Why does a bun cost about one Swedish…

Optics for Advanced Neutron Imaging and Scattering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moncton, David E.; Khaykovich, Boris

2016-03-30

During the report period, we continued the work as outlined in the original proposal. We have analyzed potential optical designs of Wolter mirrors for the neutron-imaging instrument VENUS, which is under construction at SNS. In parallel, we have conducted the initial polarized imaging experiment at Helmholtz Zentrum, Berlin, one of very few of currently available polarized-imaging facilities worldwide.

Implementing Reform Curriculum: Voicing the Experiences of an ESL/Mathematics Teacher

ERIC Educational Resources Information Center

Celedon-Pattichis, Sylvia

2010-01-01

The purpose of this 18-month case study is to highlight the successes and challenges that an ESL/mathematics teacher encountered as she made a shift from traditional mathematics curriculum to a standards-based curriculum as part of a statewide systemic initiative. The study was conducted in an urban, public middle school in Central Texas that…

Circular sawing experiments on a radial arm saw

Treesearch

Charles W. McMillin; J.L. Lubxin

1959-01-01

Several years ago, the American Machine and Foundry Co. decided to conduct a comprehensive investigation in the field of cutting processes. The initial emphasis has been on circular sawing because of the product line of the company's DeWalt Division. As a nevessary antecedent to theoretical and experimental investigations, an extensive review of the literature on...

Corporate Initiatives for Working Parents in New York City: A Ten-Industry Review.

ERIC Educational Resources Information Center

Anderson, Kristin

A study was conducted to ascertain from employers how they experience the economic and social pressures that lead some companies to provide child care assistance. Eighty corporations and five unions, having from below 250 to over 3,000 employees, were selected to report on prevailing corporate attitudes and practices concerning employee child care…

The remarkable story of the partial cutting study at the Dukes Experimental Forest

Treesearch

Laura S. Kenefic; Christel C. Kern

2013-01-01

This paper describes our recent and successful efforts to reopen the pioneering U.S. Forest Service "Partial Cutting Study" on the Dukes Experimental Forest in Michigan. This experiment in northern hardwood silviculture was initiated in 1926 and closed in 1966. Although the research conducted there informed the use of uneven-aged silviculture throughout the...

Long-term effects of weed control with picloram along a gradient of spotted knapweed invasion

Treesearch

Yvette K. Ortega; Dean E. Pearson

2011-01-01

Broadleaf herbicides are commonly used in rangelands to suppress exotic weeds and release native communities from negative impacts of invasion. However, few studies have comprehensively evaluated treatment effects on differing community components across a gradient of initial invasion levels.We conducted a 6-yr experiment within grasslands of western Montana to measure...

Research to guide trail management at Acadia National Park, Maine

Treesearch

Kelly Goonan; Robert Manning; William Valliere

2009-01-01

Acadia National Park, Maine, is the tenth most-visited national park in the United States. Managers face the challenge of protecting the park's trail system from damage while maintaining a high quality recreation experience. For this study, an initial phase of research was conducted to identify potential indicators of quality for trail resources and the visitor...

Characterization of hypervelocity metal fragments for explosive initiation

DOE PAGES

Yeager, John D.; Bowden, Patrick R.; Guildenbecher, Daniel R.; ...

2017-07-17

The fragment impact response of two plastic-bonded explosive (PBX) formulations was studied using explosively driven aluminum fragments. A generic aluminum-capped detonator generated sub-mm aluminum particles moving at hypersonic velocities. The ability of these fragments to initiate reaction or otherwise damage two PBX materials was assessed using go/no-go experiments at standoff distances of up to 160 mm. Lower density PBX 9407 (RDX-based) was initiable at up to 115 mm, while higher density PBX 9501 (HMX-based) was only initiable at up to 6 mm. Several techniques were used to characterize the size, distribution, and velocity of the particles. Witness plate materials, includingmore » copper and polycarbonate, and backlit high speed video were used to characterize the distribution of particles, finding that the aluminum cap did not fragment homogeneously but rather with larger particles in a ring surrounding finer particles. Finally, precise digital holography experiments were conducted to measure the three-dimensional shape and size of the fastest-moving fragments, which ranged between 100 and 700 μm and traveled between 2.2 and 3.2 km/s. Crucially, these experiments showed variability in the fragmentation in terms of the number of fragments at the leading edge of the fragment field, indicating that both single and multiple shock impacts could be imparted to the target material. As a result, these types of data are critical for safety experiments and hydrocode simulations to quantify shock-to-detonation transition mechanisms and the associated risk-margins for these materials.« less

Characterization of hypervelocity metal fragments for explosive initiation

NASA Astrophysics Data System (ADS)

Yeager, John D.; Bowden, Patrick R.; Guildenbecher, Daniel R.; Olles, Joseph D.

2017-07-01

The fragment impact response of two plastic-bonded explosive (PBX) formulations was studied using explosively driven aluminum fragments. A generic aluminum-capped detonator generated sub-mm aluminum particles moving at hypersonic velocities. The ability of these fragments to initiate reaction or otherwise damage two PBX materials was assessed using go/no-go experiments at standoff distances of up to 160 mm. Lower density PBX 9407 (RDX-based) was initiable at up to 115 mm, while higher density PBX 9501 (HMX-based) was only initiable at up to 6 mm. Several techniques were used to characterize the size, distribution, and velocity of the particles. Witness plate materials, including copper and polycarbonate, and backlit high speed video were used to characterize the distribution of particles, finding that the aluminum cap did not fragment homogeneously but rather with larger particles in a ring surrounding finer particles. Finally, precise digital holography experiments were conducted to measure the three-dimensional shape and size of the fastest-moving fragments, which ranged between 100 and 700 μm and traveled between 2.2 and 3.2 km/s. Crucially, these experiments showed variability in the fragmentation in terms of the number of fragments at the leading edge of the fragment field, indicating that both single and multiple shock impacts could be imparted to the target material. These types of data are critical for safety experiments and hydrocode simulations to quantify shock-to-detonation transition mechanisms and the associated risk-margins for these materials.

[Psychodrama as a pedagogical teaching strategy about worker's health].

PubMed

Martins, Júlia Trevisan; Opitz, Simone Perufo; Robazzi, Maria Lúcia do Carmo

2004-04-01

This study had the objective to report the experience of using pedagogic psychodrama as a teaching and learning strategy about the worker's health. It was developed with 18 students from the Master Program from the School of Nursing of the University of São Paulo at Ribeirão Preto, during the second semester of 2002. Interactive, dynamic and interpersonal activities, and role playing were initially conducted looking for students and educator's spontaneity. Moreno's psychodramatic theory was the theoretical framework used. Creativity, logical reasoning, involvement with learning, and organization of concepts using their own living experience were observed, contributing to the experience as a whole. Therefore, the experiment was considered successful.

Large-eddy and unsteady RANS simulations of a shock-accelerated heavy gas cylinder

DOE PAGES

Morgan, B. E.; Greenough, J. A.

2015-04-08

Two-dimensional numerical simulations of the Richtmyer–Meshkov unstable “shock-jet” problem are conducted using both large-eddy simulation (LES) and unsteady Reynolds-averaged Navier–Stokes (URANS) approaches in an arbitrary Lagrangian–Eulerian hydrodynamics code. Turbulence statistics are extracted from LES by running an ensemble of simulations with multimode perturbations to the initial conditions. Detailed grid convergence studies are conducted, and LES results are found to agree well with both experiment and high-order simulations conducted by Shankar et al. (Phys Fluids 23, 024102, 2011). URANS results using a k–L approach are found to be highly sensitive to initialization of the turbulence lengthscale L and to the timemore » at which L becomes resolved on the computational mesh. As a result, it is observed that a gradient diffusion closure for turbulent species flux is a poor approximation at early times, and a new closure based on the mass-flux velocity is proposed for low-Reynolds-number mixing.« less

Rupture preparation process controlled by surface roughness on meter-scale laboratory fault

NASA Astrophysics Data System (ADS)

Yamashita, Futoshi; Fukuyama, Eiichi; Xu, Shiqing; Mizoguchi, Kazuo; Kawakata, Hironori; Takizawa, Shigeru

2018-05-01

We investigate the effect of fault surface roughness on rupture preparation characteristics using meter-scale metagabbro specimens. We repeatedly conducted the experiments with the same pair of rock specimens to make the fault surface rough. We obtained three experimental results under the same experimental conditions (6.7 MPa of normal stress and 0.01 mm/s of loading rate) but at different roughness conditions (smooth, moderately roughened, and heavily roughened). During each experiment, we observed many stick-slip events preceded by precursory slow slip. We investigated when and where slow slip initiated by using the strain gauge data processed by the Kalman filter algorithm. The observed rupture preparation processes on the smooth fault (i.e. the first experiment among the three) showed high repeatability of the spatiotemporal distributions of slow slip initiation. Local stress measurements revealed that slow slip initiated around the region where the ratio of shear to normal stress (τ/σ) was the highest as expected from finite element method (FEM) modeling. However, the exact location of slow slip initiation was where τ/σ became locally minimum, probably due to the frictional heterogeneity. In the experiment on the moderately roughened fault, some irregular events were observed, though the basic characteristics of other regular events were similar to those on the smooth fault. Local stress data revealed that the spatiotemporal characteristics of slow slip initiation and the resulting τ/σ drop for irregular events were different from those for regular ones even under similar stress conditions. On the heavily roughened fault, the location of slow slip initiation was not consistent with τ/σ anymore because of the highly heterogeneous static friction on the fault, which also decreased the repeatability of spatiotemporal distributions of slow slip initiation. These results suggest that fault surface roughness strongly controls the rupture preparation process, and generally increases its complexity with the degree of roughness.

NASA Bioculture System: From Experiment Definition to Flight Payload

NASA Technical Reports Server (NTRS)

Sato, Kevin Y.; Almeida, Eduardo; Austin, Edward M.

2014-01-01

Starting in 2015, the NASA Bioculture System will be available to the science community to conduct cell biology and microbiology experiments on ISS. The Bioculture System carries ten environmentally independent Cassettes, which house the experiments. The closed loop fluids flow path subsystem in each Cassette provides a perfusion-based method for maintain specimen cultures in a shear-free environment by using a biochamber based on porous hollow fiber bioreactor technology. Each Cassette contains an incubator and separate insulated refrigerator compartment for storage of media, samples, nutrients and additives. The hardware is capable of fully automated or manual specimen culturing and processing, including in-flight experiment initiation, sampling and fixation, up to BSL-2 specimen culturing, and the ability to up to 10 independent cultures in parallel for statistical analysis. The incubation and culturing of specimens in the Bioculture System is a departure from standard laboratory culturing methods. Therefore, it is critical that the PI has an understanding the pre-flight test required for successfully using the Bioculture System to conduct an on-orbit experiment. Overall, the PI will conduct a series of ground tests to define flight experiment and on-orbit implementation requirements, verify biocompatibility, and determine base bioreactor conditions. The ground test processes for the utilization of the Bioculture System, from experiment selection to flight, will be reviewed. Also, pre-flight test schedules and use of COTS ground test equipment (CellMax and FiberCell systems) and the Bioculture System will be discussed.

Complex electrical monitoring of biopolymer and iron mineral precipitation for microbial enhanced hydrocarbon recovery

NASA Astrophysics Data System (ADS)

Wu, Y.; Hubbard, C. G.; Dong, W.; Hubbard, S. S.

2011-12-01

Microbially enhanced hydrocarbon recovery (MEHR) mechanisms are expected to be impacted by processes and properties that occur over a wide range of scales, ranging from surface interactions and microbial metabolism at the submicron scale to changes in wettability and pore geometry at the pore scale to geological heterogeneities at the petroleum reservoir scale. To eventually ensure successful, production-scale implementation of laboratory-developed MEHR procedures under field conditions, it is necessary to develop approaches that can remotely monitor and accurately predict the complex microbially-facilitated transformations that are expected to occur during MEHR treatments in reservoirs (such as the evolution of redox profiles, oil viscosity or matrix porosity/permeability modifications). Our initial studies are focused on laboratory experiments to assess the geophysical signatures of MEHR-induced biogeochemical transformations, with an ultimate goal of using these approaches to monitor field treatments. Here, we explore the electrical signatures of two MEHR processes that are designed to produce end-products that will plug high permeability zones in reservoirs and thus enhance sweep efficiency. The MEHR experiments to induce biopolymers (in this case dextran) and iron mineral precipitates were conducted using flow-through columns. Leuconostoc mesenteroides, a facultative anaerobe, known to produce dextran from sucrose was used in the biopolymer experiments. Paused injection of sucrose, following inoculation and initial microbial attachment, was carried out on daily basis, allowing enough time for dextran production to occur based on batch experiment observations. Electrical data were collected on daily basis and fluid samples were extracted from the column for characterization. Changes in electrical signal were not observed during initial microbial inoculation. Increase of electrical resistivity and decrease of electrical phase response were observed during the experiment and is correlated with the accumulation of dextran in the column. The changes of the electrical signals are interpreted to be due to surface masking of sand grains by dextran that reduces polarizable surface area of the sand grains. A second experiment was conducted to evaluate the sensitivity of electrical geophysical methods to iron mineral precipitation as an alternative plugging mechanism. Although anaerobic iron oxidation coupled with nitrate reduction is the targeted process, aerobic experiments were first conducted as a simplified case without biologically related effects. In this experiment, iron minerals were precipitated through oxidation of ferrous iron by oxygen. Changes in geophysical signals as well as hydraulic permeability across the column were measured. Quantification of iron mineral precipitation was carried out through mass balance and the precipitate morphology and mineralogy were analyzed with optical and electron microscopy and XRD at the end of the experiments. Correlation between geophysical signature and iron mineral precipitation was established and will be used to guide the next experiment, which will focus on microbial facilitated iron oxidation coupled with nitrate reduction under anaerobic conditions.

Simulations of Shock Wave Interaction with a Particle Cloud

NASA Astrophysics Data System (ADS)

Koneru, Rahul; Rollin, Bertrand; Ouellet, Frederick; Annamalai, Subramanian; Balachandar, S.'Bala'

2016-11-01

Simulations of a shock wave interacting with a cloud of particles are performed in an attempt to understand similar phenomena observed in dispersal of solid particles under such extreme environment as an explosion. We conduct numerical experiments in which a particle curtain fills only 87% of the shock tube from bottom to top. As such, the particle curtain upon interaction with the shock wave is expected to experience Kelvin-Helmholtz (KH) and Richtmyer-Meshkov (RM) instabilities. In this study, the initial volume fraction profile matches with that of Sandia Multiphase Shock Tube experiments, and the shock Mach number is limited to M =1.66. In these simulations we use a Eulerian-Lagrangian approach along with state-of-the-art point-particle force and heat transfer models. Measurements of particle dispersion are made at different initial volume fractions of the particle cloud. A detailed analysis of the evolution of the particle curtain with respect to the initial conditions is presented. This work was supported by the U.S. Department of Energy, National Nuclear Security Administration, Advanced Simulation and Computing Program, as a Cooperative Agreement under the Predictive Science Academic Alliance Program, Contract No. DE-NA0002378.

Steam and air co-injection in removing residual TCE in unsaturated layered sandy porous media.

PubMed

Peng, Sheng; Wang, Ning; Chen, Jiajun

2013-10-01

Steam and air co-injection is a promising technique for volatile and semi-volatile organic contaminant remediation in heterogeneous porous media. In this study, removal of trichloroethene (TCE) with steam-air co-injection was investigated through a series of 2D sandbox experiments with different layered sand structures, and through numerical simulations. The results show that a layered structure with coarse sand, in which steam and air convection are relatively rapid, resulted in a higher removal rate and a larger removal ratio than those observed in an experiment using finer sand; however, the difference was not significant, and the removal ratios from three experiments ranged from 85% to 94%. Slight downward movement of TCE was observed for Experiment 1 (TCE initially in a fine sand zone encased in a coarse sand), while no such movement was observed for Experiment 2 (TCE initially in two fine sand layers encased in a coarse sand) or 3 (TCE initially in a silty sand zone encased in a coarse sand). Simulations show accumulation of TCE at the interface of the layered sands, which indicates a capillary barrier effect in restraining the downward movement of TCE. This effect is illustrated further by a numerical experiment with homogeneous coarse sand, in which continuous downward TCE movement to the bottom of the sandbox was simulated. Another numerical experiment with higher water saturation was also conducted. The results illustrate a complicated influence of water saturation on TCE removal in a layered sand structure. Published by Elsevier B.V.

Doctors' engagements with patient experience surveys in primary and secondary care: a qualitative study.

PubMed

Farrington, Conor; Burt, Jenni; Boiko, Olga; Campbell, John; Roland, Martin

2017-06-01

Patient experience surveys are increasingly important in the measurement of, and attempts to improve, health-care quality. To date, little research has focused upon doctors' attitudes to surveys which give them personalized feedback. This paper explores doctors' perceptions of patient experience surveys in primary and secondary care settings in order to deepen understandings of how doctors view the plausibility of such surveys. We conducted a qualitative study with doctors in two regions of England, involving in-depth semi-structured interviews with doctors working in primary care (n = 21) and secondary care (n = 20) settings. The doctors in both settings had recently received individualized feedback from patient experience surveys. Doctors in both settings express strong personal commitments to incorporating patient feedback in quality improvement efforts. However, they also concurrently express strong negative views about the credibility of survey findings and patients' motivations and competence in providing feedback. Thus, individual doctors demonstrate contradictory views regarding the plausibility of patient surveys, leading to complex, varied and on balance negative engagements with patient feedback. Doctors' contradictory views towards patient experience surveys are likely to limit the impact of such surveys in quality improvement initiatives in primary and secondary care. We highlight the need for 'sensegiving' initiatives (i.e. attempts to influence perceptions by communicating particular ideas, narratives and visions) to engage with doctors regarding the plausibility of patient experience surveys. This study highlights the importance of engaging with doctors' views about patient experience surveys when developing quality improvement initiatives. © 2016 The Authors. Health Expectations Published by John Wiley & Sons Ltd.

Effects of soil aggregates on debris-flow mobilization: Results from ring-shear experiments

USGS Publications Warehouse

Iverson, Neal R.; Mann, Janet E.; Iverson, Richard M.

2010-01-01

Rates and styles of landslide motion are sensitive to pore-water pressure changes caused by changes in soil porosity accompanying shear deformation. Soil may either contract or dilate upon shearing, depending upon whether its initial porosity is greater or less, respectively, than a critical-state porosity attained after sufficiently high strain. We observed complications in this behavior, however, during rate-controlled (0.02 m s−1) ring-shear experiments conducted on naturally aggregated dense loamy sand at low confining stresses (10.6 and 40 kPa). The aggregated soil first dilated and then contracted to porosities less than initial values, whereas the same soil with its aggregates destroyed monotonically dilated. We infer that aggregates persisted initially during shear and caused dilation before their eventual breakdown enabled net contraction. An implication of this contraction, demonstrated in experiments in which initial soil porosity was varied, is that the value of porosity distinguishing initially contractive from dilative behavior can be significantly larger than the critical-state porosity, which develops only after disaggregation ceases at high strains. In addition, post-dilative contraction may produce excess pore pressures, thereby reducing frictional strength and facilitating debris-flow mobilization. We infer that results of triaxial tests, which generally produce strains at least a factor of ∼ 4 smaller than those we observed at the inception of post-dilative contraction, do not allow soil contraction to be ruled out as a mechanism for debris-flow mobilization in dense soils containing aggregates.

[Violence in the family: Ecuadorian experience in the formulation of policies for health services].

PubMed

Maira, G

1999-01-01

Since 1995, PAHO has been carrying out in Bolivia, Ecuador, and Peru a project known as "Violence against Women and Girls: Proposal to Establish Community-coordinated Interventions in Three Countries of the Andean Subregion." Its purpose is to support initiatives being conducted by various nongovernmental organizations (NGOs), government agencies, and social institutions in an attempt to improve the status of women. One of its objectives is to formulate public policies and local services aimed at preventing and combating violence against women and girls through local action networks, data-gathering systems, and legal proposals. This article examines what the initiative has achieved so far in Ecuador, in efforts conducted in Quito, Guayaquil, and Sigsig with the support of three national NGOs and in conjunction with the Ministry of Health and the National Women's Council.

The Functional Measurement Experiment Builder suite: two Java-based programs to generate and run functional measurement experiments.

PubMed

Mairesse, Olivier; Hofmans, Joeri; Theuns, Peter

2008-05-01

We propose a free, easy-to-use computer program that does not requires prior knowledge of computer programming to generate and run experiments using textual or pictorial stimuli. Although the FM Experiment Builder suite was initially programmed for building and conducting FM experiments, it can also be applied for non-FM experiments that necessitate randomized, single, or multifactorial designs. The program is highly configurable, allowing multilingual use and a wide range of different response formats. The outputs of the experiments are Microsoft Excel compatible .xls files that allow easy copy-paste of the results into Weiss's FM CalSTAT program (2006) or any other statistical package. Its Java-based structure is compatible with both Windows and Macintosh operating systems, and its compactness (< 1 MB) makes it easily distributable over the Internet.

Evaluation of spatial, radiometric and spectral Thematic Mapper performance for coastal studies

NASA Technical Reports Server (NTRS)

Klemas, V. (Principal Investigator)

1983-01-01

A series of experiments were initiated to determine the feasibility of using thematic mapper spectral data to estimate wetlands biomass. The experiments were conducted using hand-held radiometers simulating thematic mapper wavebands 3, 4 and 5. Spectral radiance data were collected from the ground and from a low altitude aircraft in an attempt to gain some insight into the potential utility of actual thematic mapper data for biomass estimation in wetland plant communities. In addition, radiative transfer models describing volume reflectance of eight water column containing submerged aquatic vegetation were refined.

Development of a MEMS device for acoustic emission testing

NASA Astrophysics Data System (ADS)

Ozevin, Didem; Pessiki, Stephen P.; Jain, Akash; Greve, David W.; Oppenheim, Irving J.

2003-08-01

Acoustic emission testing is an important technology for evaluating structural materials, and especially for detecting damage in structural members. Significant new capabilities may be gained by developing MEMS transducers for acoustic emission testing, including permanent bonding or embedment for superior coupling, greater density of transducer placement, and a bundle of transducers on each device tuned to different frequencies. Additional advantages include capabilities for maintenance of signal histories and coordination between multiple transducers. We designed a MEMS device for acoustic emission testing that features two different mechanical types, a hexagonal plate design and a spring-mass design, with multiple detectors of each type at ten different frequencies in the range of 100 kHz to 1 MHz. The devices were fabricated in the multi-user polysilicon surface micromachining (MUMPs) process and we have conducted electrical characterization experiments and initial experiments on acoustic emission detection. We first report on C(V) measurements and perform a comparison between predicted (design) and measured response. We next report on admittance measurements conducted at pressures varying from vacuum to atmospheric, identifying the resonant frequencies and again providing a comparison with predicted performance. We then describe initial calibration experiments that compare the performance of the detectors to other acoustic emission transducers, and we discuss the overall performance of the device as a sensor suite, as contrasted to the single-channel performance of most commercial transducers.

Timely initiation of complementary feeding and associated factors among children aged 6 to 12 months in Northern Ethiopia: an institution-based cross-sectional study

PubMed Central

2013-01-01

Background Exclusive breastfeeding (EBF) for the first six months of life is critical for the wellbeing of the child. In the mean while, timely initiation and starting nutritionally-adequate, safe, age-appropriate complementary feeding at six months is recommended for the better health and development of infants. According to the Ethiopian Demographic and Health Survey 2011, timely initiation of complementary feeding in Ethiopia at the 6th month was only 51%. The purpose of this study is to determine the magnitude of timely initiation of complementary feeding and associated factors in Mekelle town, Northern Ethiopia. Methods An institutional based cross-sectional study design was conducted among 422 mothers of infants aged from six months to one year selected from six public health facilities. Sample size proportional to the patient flow rate of each institution was allocated and systematic random sampling method was used to get the study participant. An exit interview using structured questionnaire was conducted about their experience on complementary feeding and related experience. The questionnaire was pretested among 21 mothers. Data were entered with EPI info version 3.5.1 and cleaning and analysis was done by using SPSS version 16. Frequencies distribution, binary and multiple logistic regressions were done. OR and 95% confidence interval was computed. Result The prevalence of timely initiation of complementary feeding at sixth month was 62.8% (265/422, 95% C.I: 58.1, 67.31%). Educational level, occupation of mother, parity, having ANC follow up, and birth preparedness were found to be independent predictor of timely initiation of complementary feeding. Conclusions Almost two-third of mothers initiated complementary feeding at six month of child’ age as recommended. This was relatively higher prevalence than most developing countries. However, significant proportion of mothers still did not initiate complementary feeding timely. Mothers who are illiterate and completed only primary school need more attention. All mothers must be encouraged to make antenatal care follow up. PMID:24195592

A platform for exploding wires in different media

NASA Astrophysics Data System (ADS)

Han, Ruoyu; Wu, Jiawei; Qiu, Aici; Zhou, Haibin; Wang, Yanan; Yan, Jiaqi; Ding, Weidong

2017-10-01

A platform SWE-2 used for single wire explosion experiments has been designed, established, and commissioned. This paper describes the design and initial experiments of SWE-2. In summary, two pulsed current sources based on pulse capacitors and spark gaps are adopted to drive sub-microsecond and microsecond time scale wire explosions in a gaseous/liquid medium, respectively. In the initial experiments, a single copper wire was exploded in air, helium, and argon with a 0.1-0.3 MPa ambient pressure as well as tap water with a 283-323 K temperature, 184-11 000 μ S/cm conductivity, or 0.1-0.9 MPa hydrostatic pressure. In addition, the diagnostic system is introduced in detail. Energy deposition, optical emission, and shock wave characteristics are briefly discussed based on experimental results. The platform was demonstrated to operate successfully with a single wire load. These results provide the potential for further applications of this platform, such as plasma-matter interactions, shock wave effects, and reservoir simulations.

Coupling model of aerobic waste degradation considering temperature, initial moisture content and air injection volume.

PubMed

Ma, Jun; Liu, Lei; Ge, Sai; Xue, Qiang; Li, Jiangshan; Wan, Yong; Hui, Xinminnan

2018-03-01

A quantitative description of aerobic waste degradation is important in evaluating landfill waste stability and economic management. This research aimed to develop a coupling model to predict the degree of aerobic waste degradation. On the basis of the first-order kinetic equation and the law of conservation of mass, we first developed the coupling model of aerobic waste degradation that considered temperature, initial moisture content and air injection volume to simulate and predict the chemical oxygen demand in the leachate. Three different laboratory experiments on aerobic waste degradation were simulated to test the model applicability. Parameter sensitivity analyses were conducted to evaluate the reliability of parameters. The coupling model can simulate aerobic waste degradation, and the obtained simulation agreed with the corresponding results of the experiment. Comparison of the experiment and simulation demonstrated that the coupling model is a new approach to predict aerobic waste degradation and can be considered as the basis for selecting the economic air injection volume and appropriate management in the future.

Adaptive design of visual perception experiments

NASA Astrophysics Data System (ADS)

O'Connor, John D.; Hixson, Jonathan; Thomas, James M., Jr.; Peterson, Matthew S.; Parasuraman, Raja

2010-04-01

Meticulous experimental design may not always prevent confounds from affecting experimental data acquired during visual perception experiments. Although experimental controls reduce the potential effects of foreseen sources of interference, interaction, or noise, they are not always adequate for preventing the confounding effects of unforeseen forces. Visual perception experimentation is vulnerable to unforeseen confounds because of the nature of the associated cognitive processes involved in the decision task. Some confounds are beyond the control of experimentation, such as what a participant does immediately prior to experimental participation, or the participant's attitude or emotional state. Other confounds may occur through ignorance of practical control methods on the part of the experiment's designer. The authors conducted experiments related to experimental fatigue and initially achieved significant results that were, upon re-examination, attributable to a lack of adequate controls. Re-examination of the original results and the processes and events that led to them yielded a second experimental design with more experimental controls and significantly different results. The authors propose that designers of visual perception experiments can benefit from planning to use a test-fix-test or adaptive experimental design cycle, so that unforeseen confounds in the initial design can be remedied.

The Persistence of Preschool Effects: A Long-Term Follow-Up of Fourteen Infant and Preschool Experiences. Summary Report.

ERIC Educational Resources Information Center

Lazar, Irving; And Others

This paper summarizes a larger report of the findings of the Developmental Continuity Consortium, a collaborative effort of twelve research groups conducting longitudinal studies on the outcomes of early education programs for low-income children initiated in the 1960's. Summarized are: (1) Methods (problems of secondary analysis, problems of…

Linked Learning as a High School Transformation Strategy: Organizational Structures and Leadership Behaviors That Support Lasting Change

ERIC Educational Resources Information Center

Weiss, Elizabeth Rocio

2016-01-01

Linked Learning is an approach that has proven effective in transforming the learning experiences for high school students. An instrumental case study was conducted in a large urban district in Southern California where district and school leaders implemented Linked Learning as a systemic high school reform initiative. Analysis of the data…

Foster Parents Speak: Preferred Characteristics of Foster Children and Experiences in the Role of Foster Parent

ERIC Educational Resources Information Center

Rosenwald, Mitchell; Bronstein, Laura

2008-01-01

Foster parents play a pivotal role in the child welfare system. A study that employed focus groups with foster parents was conducted at a private foster care agency with the initial purpose of understanding the characteristics of foster children that foster parents both preferred and not preferred. In the qualitative research tradition, their…

Initial cerulean warbler response to experimental silvicultural manipulations, Desha County, Arkansas

Treesearch

Paul B. Hamel; Mike Staten; Rodney Wishard

2006-01-01

Cerulean warbler [Dendroica cerulea (Wilson) Aves, Parulidae] is a neotropical migratory bird that has become a focus of management attention. Since 1992, we have studied breeding birds on a 54-ha site owned by Anderson-Tully Company, in Desha County, AR. In 2002, we conducted an unreplicated experiment there to assess the species’ response to...

Initial Evaluation of a Mobile Scaffolding Application That Seeks to Support Novice Learners of Programming

ERIC Educational Resources Information Center

Mbogo, Chao; Blake, Edwin; Suleman, Hussein

2014-01-01

The aim of this paper is to explore the use of an application that scaffolds the constructions of programs on a mobile device. The application was developed to support novice learners of programming outside the classroom. This paper reports on results of a first experiment conducted to evaluate the mobile application. The main research questions…

Current status of experimental paired-watershed research in the USDA Forest Service

Treesearch

Robert R. Ziemer; Douglas F. Ryan

2000-01-01

The first paired-watershed experiment on forested lands in the United States was conducted by the USDA Forest Service from 1909-1928 near Wagon Wheel Gap in Colorado. By the 1930's, experimental watershed studies had been initiated in southern California (San Dimas), Arizona (Sierra Ancha), and North Carolina (Coweeta). By the 1960's, there were 150...

A Study of Attitudes Associated with Retraining. Part I. Work Resource and Retraining Initiative.

ERIC Educational Resources Information Center

Miskovic, Darlene

A study was conducted to develop an understanding of retraining from the perspective of those who have experienced it--to know more about how and why they decided to undertake the process of acquiring new or additional work skills, how they learned about the alternatives available to them, and what feelings accompanied this experience. Research…

Nurturing Creativity and Innovation through FabKids: A Case Study

ERIC Educational Resources Information Center

Beyers, Ronald Noel

2010-01-01

This paper will report on a case study that was conducted involving Grade 10 learners who were exposed to a high-tech rapid-prototyping environment of a Fabrication Laboratory as part of a FabKids experience. This project must be viewed in the context of a global shortage of key skills placing a higher priority on the initiation and development of…

Pilot Program of Online Learning in Three Small High Schools: Considerations of Learning Styles

ERIC Educational Resources Information Center

Garthwait, Abigail

2014-01-01

This case study was conducted in three schools in Maine, United States. The goal of this qualitative research was two-fold: to describe the process used by a small educational consortium as it initiated formal online education, and to view this experience through the lens of students' preferred learning styles. The United States does not have a…

Effects of picloram application on community dominants vary with initial levels of spotted knapweed (Centaurea stoebe) invasion

Treesearch

Yvete K. Ortega; Dean E. Pearson

2010-01-01

Broadleaf herbicides are commonly used to suppress exotic weeds with the intent of releasing native species from negative impacts of invasion. However, weed control measures can also have unintended consequences that should be considered along with intended effects. We conducted a controlled field experiment within bunchgrass communities of western Montana to examine...

Beryllium liner implosion experiments on the Z accelerator in preparation for magnetized liner inertial fusiona)

NASA Astrophysics Data System (ADS)

McBride, R. D.; Martin, M. R.; Lemke, R. W.; Greenly, J. B.; Jennings, C. A.; Rovang, D. C.; Sinars, D. B.; Cuneo, M. E.; Herrmann, M. C.; Slutz, S. A.; Nakhleh, C. W.; Ryutov, D. D.; Davis, J.-P.; Flicker, D. G.; Blue, B. E.; Tomlinson, K.; Schroen, D.; Stamm, R. M.; Smith, G. E.; Moore, J. K.; Rogers, T. J.; Robertson, G. K.; Kamm, R. J.; Smith, I. C.; Savage, M.; Stygar, W. A.; Rochau, G. A.; Jones, M.; Lopez, M. R.; Porter, J. L.; Matzen, M. K.

2013-05-01

Multiple experimental campaigns have been executed to study the implosions of initially solid beryllium (Be) liners (tubes) on the Z pulsed-power accelerator. The implosions were driven by current pulses that rose from 0 to 20 MA in either 100 or 200 ns (200 ns for pulse shaping experiments). These studies were conducted in support of the recently proposed Magnetized Liner Inertial Fusion concept [Slutz et al., Phys. Plasmas 17, 056303 (2010)], as well as for exploring novel equation-of-state measurement techniques. The experiments used thick-walled liners that had an aspect ratio (initial outer radius divided by initial wall thickness) of either 3.2, 4, or 6. From these studies, we present three new primary results. First, we present radiographic images of imploding Be liners, where each liner contained a thin aluminum sleeve for enhancing the contrast and visibility of the liner's inner surface in the images. These images allow us to assess the stability of the liner's inner surface more accurately and more directly than was previously possible. Second, we present radiographic images taken early in the implosion (prior to any motion of the liner's inner surface) of a shockwave propagating radially inward through the liner wall. Radial mass density profiles from these shock compression experiments are contrasted with profiles from experiments where the Z accelerator's pulse shaping capabilities were used to achieve shockless ("quasi-isentropic") liner compression. Third, we present "micro-Ḃ" measurements of azimuthal magnetic field penetration into the initially vacuum-filled interior of a shocked liner. Our measurements and simulations reveal that the penetration commences shortly after the shockwave breaks out from the liner's inner surface. The field then accelerates this low-density "precursor" plasma to the axis of symmetry.

Beryllium liner implosion experiments on the Z accelerator in preparation for magnetized liner inertial fusion

DOE Office of Scientific and Technical Information (OSTI.GOV)

McBride, R. D.; Martin, M. R.; Lemke, R. W.

Multiple experimental campaigns have been executed to study the implosions of initially solid beryllium (Be) liners (tubes) on the Z pulsed-power accelerator. The implosions were driven by current pulses that rose from 0 to 20 MA in either 100 or 200 ns (200 ns for pulse shaping experiments). These studies were conducted in support of the recently proposed Magnetized Liner Inertial Fusion concept [Slutz et al., Phys. Plasmas 17, 056303 (2010)], as well as for exploring novel equation-of-state measurement techniques. The experiments used thick-walled liners that had an aspect ratio (initial outer radius divided by initial wall thickness) of eithermore » 3.2, 4, or 6. From these studies, we present three new primary results. First, we present radiographic images of imploding Be liners, where each liner contained a thin aluminum sleeve for enhancing the contrast and visibility of the liner's inner surface in the images. These images allow us to assess the stability of the liner's inner surface more accurately and more directly than was previously possible. Second, we present radiographic images taken early in the implosion (prior to any motion of the liner's inner surface) of a shockwave propagating radially inward through the liner wall. Radial mass density profiles from these shock compression experiments are contrasted with profiles from experiments where the Z accelerator's pulse shaping capabilities were used to achieve shockless (“quasi-isentropic”) liner compression. Third, we present “micro-B-dot ” measurements of azimuthal magnetic field penetration into the initially vacuum-filled interior of a shocked liner. Our measurements and simulations reveal that the penetration commences shortly after the shockwave breaks out from the liner's inner surface. The field then accelerates this low-density “precursor” plasma to the axis of symmetry.« less

Influence Of The Redox State On The Electrical Conductivity Of Basaltic Melts

NASA Astrophysics Data System (ADS)

Pommier, A.; Gaillard, F.; Pichavant, M.

2007-12-01

The electrical conductivity is an efficient probe of mass transfer processes within silicate melts and magmas. Previous studies have established that the electrical conductivity is sensitive to parameters such as temperature, melt composition and pressure. In contrast to what is known for Fe-bearing minerals, little attention has been given to the influence of redox state on the electrical conductivity of melts. Experiments were performed on tephritic and basaltic compositions respectively from Mt. Vesuvius and Pu'u 'O'o. Measurements were carried out on cylindrical glass samples (OD: 6 mm, ID: 1 mm, L: 8 mm) drilled from glass obtained by fusing each rock sample at 1400°C in air. A two-electrode configuration was adopted, with the electrical impedance being radially measured. A Pt wire was used as the internal electrode whereas a Pt tube served as the external electrode. Experiments were conducted at 1 atm in a vertical furnace between 1200°C and 1300°C, both in air and in a CO-CO2 atmosphere at a fO2 corresponding to NNO+1. Both reduction and oxidation experiments were performed. In reduction experiments (pure CO2 then CO-CO2 gas mixture), electrical conductivities progressively increase with time. The reverse is observed in oxidation experiments (CO-CO2 gas mixture then pure CO2). These variations of electrical conductivities are correlated with modifications of the Fe2+/Fe3+ ratio in the melt, and are consistent with the respective structural roles of Fe2+ and Fe3+. In both types of experiments, a minimum of about 400 mn is necessary before a plateau is reached, interpreted to reflect the kinetics of attainment of the equilibrium Fe2+/Fe3+ ratio in the melt. Differences between plateau and initial values are typically of a few ohms, much higher than the sensitivity of our measurements (better than 0.1 ohm). When increasing temperature, the time required for reaching plateau values decreases. At NNO+1, the electrical activation energy (Ea) was determined for both compositions: Ea=137 kJ/mol (tephrite) and 73 kJ/mol (basalt). Further experiments are necessary to quantify the influence of redox state on electrical conductivity, especially at fO2 below NNO+1.

Fracture propagation during fluid injection experiments in shale at elevated confining pressures.

NASA Astrophysics Data System (ADS)

Chandler, Mike; Mecklenburgh, Julian; Rutter, Ernest; Fauchille, Anne-Laure; Taylor, Rochelle; Lee, Peter

2017-04-01

The use of hydraulic fracturing to recover shale-gas has focused attention upon the fundamental fracture properties of gas-bearing shales. Fracture propagation trajectories in these materials depend on the interaction between the anisotropic mechanical properties of the shale and the anisotropic in-situ stress field. However, there is a general paucity of available experimental data on their anisotropic mechanical, physical and fluid-flow properties, especially at elevated confining pressures. Here we report the results of laboratory-scale fluid injection experiments, for Whitby mudstone and Mancos shale (an interbedded silt and mudstone), as well as Pennant sandstone (a tight sandstone with permeability similar to shales), which is used an isotropic baseline and tight-gas sandstone analogue. Our injection experiments involved the pressurisation of a blind-ending central hole in an initially dry cylindrical sample. Pressurisation was conducted under constant volume-rate control, using silicone oils of various viscosities. The dependence of breakdown pressure on confining pressure was seen to be dependent on the rock strength, with the significantly stronger Pennant sandstone exhibiting much lower confining-pressure dependence of breakdown pressure than the weaker shales. In most experiments, a small drop in the injection pressure record was observed at what is taken to be fracture initiation, and in the Pennant sandstone this was accompanied by a small burst of acoustic energy. Breakdown was found to be rapid and uncontrollable after initiation if injection is continued, but can be limited to a slower (but still uncontrolled) rate by ceasing the injection of fluid after the breakdown initiation in experiments where it could be identified. A simplified 2-dimensional model for explaining these observations is presented in terms of the stress intensities at the tip of a pressurised crack. Additionally, we present a suite of supporting mechanical, flow and elastic measurements. Mechanical experiments include standard triaxial tests, pressure-dependent permeability experiments and fracture toughness determined using the double-torsion test. Elastic characterisation was determined through ultrasonic velocities determined using a cross-correlation method.

Dendrite Array Disruption by Bubbles during Re-melting in a Microgravity Environment

NASA Technical Reports Server (NTRS)

Grugel, Richard N.

2012-01-01

As part of the Pore Formation and Mobility Investigation (PFMI), Succinonitrile Water alloys consisting of aligned dendritic arrays were re-melted prior to conducting directional solidification experiments in the microgravity environment aboard the International Space Station. Thermocapillary convection initiated by bubbles at the solid-liquid interface during controlled melt back of the alloy was observed to disrupt the initial dendritic alignment. Disruption ranged from detaching large arrays to the transport of small dendrite fragments at the interface. The role of bubble size and origin is discussed along with subsequent consequences upon reinitiating controlled solidification.

Adhesion, friction, and wear of a copper bicrystal with (111) and (210) grains

NASA Technical Reports Server (NTRS)

Brainard, W. A.; Buckley, D. H.

1973-01-01

Sliding friction experiments were conducted in air with polycrystalline copper and ruby riders sliding against a copper bicrystal. Friction coefficient was measured across the bicrystal surface, and the initiation of adhesive wear was examined with scanning electron microscopy. Results indicate a marked increase in friction coefficient as the copper rider crossed the grain boundary from the (111) plane to the (210) plane of the bicrystal. Adhesion, friction, and initiation of adhesive wear was notably different in the adjacent grains of differing orientation. A slip-band adhesion-generated fracture mechanism for wear particle formation is proposed.

Adolescent Experiences with the Vaginal Ring

PubMed Central

Epstein, Laura B.; Sokal-Gutierrez, Karen; Ivey, Susan L.; Raine, Tina; Auerswald, Colette

2011-01-01

Purpose To understand racial/ethnic minority adolescent females’ experiences with the vaginal ring. Methods We conducted in-depth interviews with a clinic-based sample of 32 young women aged 15–24 years who had used the vaginal ring. Results Qualitative analysis using grounded theory revealed that adolescents undergo a multi-stage process when trying the ring and adopting ring use. These stages include hearing about the ring, initial reactions, first experiences with insertion and removal, and first sexual experiences. Adolescents subsequently enter an assessment and adjustment stage in which they decide whether to adopt or discontinue ring use. Ultimately they share their experiences with friends. Conclusions The model developed provides a context within which providers may advise adolescents as they begin use of the ring. Some specific recommendations are offered. PMID:18565439

Estimates of crystalline LiF thermal conductivity at high temperature and pressure by a Green-Kubo method

DOE PAGES

Jones, R. E.; Ward, D. K.

2016-07-18

Here, given the unique optical properties of LiF, it is often used as an observation window in high-temperature and -pressure experiments; hence, estimates of its transmission properties are necessary to interpret observations. Since direct measurements of the thermal conductivity of LiF at the appropriate conditions are difficult, we resort to molecular simulation methods. Using an empirical potential validated against ab initio phonon density of states, we estimate the thermal conductivity of LiF at high temperatures (1000–4000 K) and pressures (100–400 GPa) with the Green-Kubo method. We also compare these estimates to those derived directly from ab initio data. To ascertainmore » the correct phase of LiF at these extreme conditions, we calculate the (relative) phase stability of the B1 and B2 structures using a quasiharmonic ab initio model of the free energy. We also estimate the thermal conductivity of LiF in an uniaxial loading state that emulates initial stages of compression in high-stress ramp loading experiments and show the degree of anisotropy induced in the conductivity due to deformation.« less

A comparison of large-scale electron beam and bench-scale 60Co irradiations of simulated aqueous waste streams

NASA Astrophysics Data System (ADS)

Kurucz, Charles N.; Waite, Thomas D.; Otaño, Suzana E.; Cooper, William J.; Nickelsen, Michael G.

2002-11-01

The effectiveness of using high energy electron beam irradiation for the removal of toxic organic chemicals from water and wastewater has been demonstrated by commercial-scale experiments conducted at the Electron Beam Research Facility (EBRF) located in Miami, Florida and elsewhere. The EBRF treats various waste and water streams up to 450 l min -1 (120 gal min -1) with doses up to 8 kilogray (kGy). Many experiments have been conducted by injecting toxic organic compounds into various plant feed streams and measuring the concentrations of compound(s) before and after exposure to the electron beam at various doses. Extensive experimentation has also been performed by dissolving selected chemicals in 22,700 l (6000 gal) tank trucks of potable water to simulate contaminated groundwater, and pumping the resulting solutions through the electron beam. These large-scale experiments, although necessary to demonstrate the commercial viability of the process, require a great deal of time and effort. This paper compares the results of large-scale electron beam irradiations to those obtained from bench-scale irradiations using gamma rays generated by a 60Co source. Dose constants from exponential contaminant removal models are found to depend on the source of radiation and initial contaminant concentration. Possible reasons for observed differences such as a dose rate effect are discussed. Models for estimating electron beam dose constants from bench-scale gamma experiments are presented. Data used to compare the removal of organic compounds using gamma irradiation and electron beam irradiation are taken from the literature and a series of experiments designed to examine the effects of pH, the presence of turbidity, and initial concentration on the removal of various organic compounds (benzene, toluene, phenol, PCE, TCE and chloroform) from simulated groundwater.

Airborne Visible Laser Optical Communications (AVLOC) experiment

NASA Technical Reports Server (NTRS)

1974-01-01

A series of optical communication experiments between a high altitude aircraft at 18.3 km (60,000 ft) and a ground station were conducted by NASA from summer 1972 through winter 1973. The basic system was an optical tracker and transmitter located in each terminal. The aircraft transceiver consisted of a 5-mW HeNe laser transmitter with a 30-megabit modulator. The ground station beacon was an argon laser operating at 488 nm. A separate pulsed laser radar was used for initial acquisition. The objective of the experiment was to obtain engineering data on the precision tracking and communication system performance at both terminals. Atmospheric effects on the system performance was also an experiment objective. The system description, engineering analysis, testing, and flight results are discussed.

Adverse childhood experiences of low-income urban youth.

PubMed

Wade, Roy; Shea, Judy A; Rubin, David; Wood, Joanne

2014-07-01

Current assessments of adverse childhood experiences (ACEs) may not adequately encompass the breadth of adversity to which low-income urban children are exposed. The purpose of this study was to identify and characterize the range of adverse childhood experiences faced by young adults who grew up in a low-income urban area. Focus groups were conducted with young adults who grew up in low-income Philadelphia neighborhoods. Using the nominal group technique, participants generated a list of adverse childhood experiences and then identified the 5 most stressful experiences on the group list. The most stressful experiences identified by participants were grouped into a ranked list of domains and subdomains. Participants identified a range of experiences, grouped into 10 domains: family relationships, community stressors, personal victimization, economic hardship, peer relationships, discrimination, school, health, child welfare/juvenile justice, and media/technology. Included in these domains were many but not all of the experiences from the initial ACEs studies; parental divorce/separation and mental illness were absent. Additional experiences not included in the initial ACEs but endorsed by our participants included single-parent homes; exposure to violence, adult themes, and criminal behavior; personal victimization; bullying; economic hardship; and discrimination. Gathering youth perspectives on childhood adversity broadens our understanding of the experience of stress and trauma in childhood. Future work is needed to determine the significance of this broader set of adverse experiences in predisposing children to poor health outcomes as adults. Copyright © 2014 by the American Academy of Pediatrics.

Electrolysis Performance Improvement Concept Study (EPICS) Flight Experiment-Reflight

NASA Technical Reports Server (NTRS)

Schubert, F. H.

1997-01-01

The Electrolysis Performance Improvement Concept Study (EPICS) is a flight experiment to demonstrate and validate in a microgravity environment the Static Feed Electrolyzer (SFE) concept which was selected for the use aboard the International Space Station (ISS) for oxygen (O2) generation. It also is to investigate the impact of microgravity on electrochemical cell performance. Electrochemical cells are important to the space program because they provide an efficient means of generating O2 and hydrogen (H2) in space. Oxygen and H2 are essential not only for the survival of humans in space but also for the efficient and economical operation of various space systems. Electrochemical cells can reduce the mass, volume and logistical penalties associated with resupply and storage by generating and/or consuming these gases in space. An initial flight of the EPICS was conducted aboard STS-69 from September 7 to 8, 1995. A temperature sensor characteristics shift and a missing line of software code resulted in only partial success of this initial flight. Based on the review and recommendations of a National Aeronautics and Space Administration (NASA) Johnson Space Center (JSC) review team a reflight activity was initiated to obtain the remaining desired results, not achieved during the initial flight.

Control of interferon-tau secretion by in vitro-derived bovine blastocysts during extended culture and outgrowth formation.

PubMed

Kubisch, H M; Larson, M A; Kiesling, D O

2001-04-01

A series of experiments was conducted to examine the pattern of interferon-tau (IFN-tau) secretion by bovine blastocysts during extended culture in vitro. In the first experiment, blastocysts were cultured individually for three 48-hour periods. The day of blastocyst formation affected how much IFN-tau was produced during the first two culture periods, but not during the third period. The overall secretion of IFN-tau during the 6-day period increased significantly and well beyond what could be accounted for by the concomitant increase in cell numbers. In the second experiment, blastocysts were initially cultured in individual droplets for 48 hr, then plated into 48-well plates. Medium concentrations of IFN-tau were determined after 48 hr and again after 6 and 12 days of culture. Initial IFN-tau secretion did not affect the ability to form outgrowths or their final size, and initial differences in secretion between groups of blastocysts had disappeared by the second and third analyses. In the third experiment, blastocysts were cultured individually for 48 hr in droplets containing the medium that had been flushed through the uteri of non-pregnant sheep on days 10, 12, and 15 of the estrous cycle. Culture in the medium obtained from the Day 15 flush significantly increased the number of cells that blastocysts contained, as well as IFN-tau secretion.

Pretest characterization of WIPP experimental waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, J.; Davis, H.; Drez, P.E.

The Waste Isolation Pilot Plant (WIPP) near Carlsbad, New Mexico, is an underground repository designed for the storage and disposal of transuranic (TRU) wastes from US Department of Energy (DOE) facilities across the country. The Performance Assessment (PA) studies for WIPP address compliance of the repository with applicable regulations, and include full-scale experiments to be performed at the WIPP site. These experiments are the bin-scale and alcove tests to be conducted by Sandia National Laboratories (SNL). Prior to conducting these experiments, the waste to be used in these tests needs to be characterized to provide data on the initial conditionsmore » for these experiments. This characterization is referred to as the Pretest Characterization of WIPP Experimental Waste, and is also expected to provide input to other programmatic efforts related to waste characterization. The purpose of this paper is to describe the pretest waste characterization activities currently in progress for the WIPP bin-scale waste, and to discuss the program plan and specific analytical protocols being developed for this characterization. The relationship between different programs and documents related to waste characterization efforts is also highlighted in this paper.« less

Initiatives on early detection and intervention to proactively identify health and social problems in older people: experiences from the Netherlands.

PubMed

Lette, Manon; Baan, Caroline A; van den Berg, Matthijs; de Bruin, Simone R

2015-10-30

Over the last years, several initiatives on early detection and intervention have been put in place to proactively identify health and social problems in (frail) older people. An overview of the initiatives currently available in the Netherlands is lacking, and it is unknown whether they meet the preferences and needs of older people. Therefore, the objectives of this study were threefold: 1. To identify initiatives on early detection and intervention for older people in the Netherlands and compare their characteristics; 2. To explore the experiences of professionals with these initiatives; and 3. To explore to what extent existing initiatives meet the preferences and needs of older people. We performed a qualitative descriptive study in which we conducted semi-structured interviews with seventeen experts in preventive elderly care and three group interviews with volunteer elderly advisors. Data were analysed using the framework analysis method. We identified eight categories of initiatives based on the setting (e.g. general practitioner practice, hospital, municipality) in which they were offered. Initiatives differed in their aims and target groups. The utilization of peers to identify problems and risks, as was done by some initiatives, was seen as a strength. Difficulties were experienced with identifying the target group that would benefit from proactive delivery of care and support most, and with addressing prevalent issues among older people (e.g. psychosocial issues, self-reliance issues). Although there is a broad array of initiatives available, there is a discrepancy between supply and demand. Current initiatives insufficiently address needs of (frail) older people. More insight is needed in "what should be done by whom, for which target group and at what moment", in order to improve current practice in preventive elderly care.

Direct measurement of asperity contact growth in quartz at hydrothermal conditions

USGS Publications Warehouse

Beeler, Nicholas M.; Hickman, Stephen H.

2015-01-01

Earthquake recurrence requires interseismic fault restrengthening which results from solid state deformation in room-temperature friction and indentation experiments. In contrast exhumed fault zones show solution-transport processes such as pressure solution and contact overgrowths influence fault zone properties . In the absence of fluid flow, overgrowths are driven by gradients in surface curvature where material is dissolved, diffuses, and precipitates at the contact without convergence normal to the contact. To determine the rate of overgrowth for quartz, we conducted single contact experiments in an externally heated pressure vessel. Convergence was continuously monitored using reflected-light interferometry through a long-working-distance microscope. Contact normal force was constant with an initial effective normal stress of 1.7 MPa, temperature was between 350 and 530{degree sign}C, and water pressure was constant at 150 MPa. Two control experiments were conducted: one dry at 425{degree sign}C and one bi-material (sapphire) at 425{degree sign}C and 150 MPa water pressure. No contact growth or convergence was observed in the controls. For wet single-phase contacts, growth was initially rapid and then decreased with time. No convergence was observed. Fluid inclusions indicate that the contact is not uniformly wetted. The contact is bounded by small regions of high aperture, reflecting local free-face dissolution as the source for the overgrowth. The apparent activation energy is ~125 kJ/mol. Extrapolation predicts rates of contact area increase orders of magnitude faster than in dry, room-temperature and hydrothermal friction experiments, suggesting that natural strength recovery near the base of the seismogenic zone could be dominated by contact overgrowth.

Improved silicon nitride for advanced heat engines

NASA Technical Reports Server (NTRS)

Yeh, Hun C.; Fang, Ho T.

1987-01-01

The technology base required to fabricate silicon nitride components with the strength, reliability, and reproducibility necessary for actual heat engine applications is presented. Task 2 was set up to develop test bars with high Weibull slope and greater high temperature strength, and to conduct an initial net shape component fabrication evaluation. Screening experiments were performed in Task 7 on advanced materials and processing for input to Task 2. The technical efforts performed in the second year of a 5-yr program are covered. The first iteration of Task 2 was completed as planned. Two half-replicated, fractional factorial (2 sup 5), statistically designed matrix experiments were conducted. These experiments have identified Denka 9FW Si3N4 as an alternate raw material to GTE SN502 Si3N4 for subsequent process evaluation. A detailed statistical analysis was conducted to correlate processing conditions with as-processed test bar properties. One processing condition produced a material with a 97 ksi average room temperature MOR (100 percent of goal) with 13.2 Weibull slope (83 percent of goal); another condition produced 86 ksi (6 percent over baseline) room temperature strength with a Weibull slope of 20 (125 percent of goal).

Art and theatre for health in rural Cambodia.

PubMed

Nguon, Chea; Dysoley, Lek; Davoeung, Chan; Sovann, Yok; Sanann, Nou; Sareth, Ma; Kunthea, Pich; Vuth, San; Sovann, Kem; Kol, Kayna; Heng, Chhouen; Sary, Rouen; Peto, Thomas J; Tripura, Rupam; Lim, Renly; Cheah, Phaik Yeong

2018-01-01

This article describes our experience using art and theatre to engage rural communities in western Cambodia to understand malaria and support malaria control and elimination. The project was a pilot science-arts initiative to supplement existing engagement activities conducted by local authorities. In 2016, the project was conducted in 20 villages, involved 300 community members and was attended by more than 8000 people. Key health messages were to use insecticide-treated bed-nets and repellents, febrile people should attend village malaria workers, and to raise awareness about the risk of forest-acquired malaria. Building on the experience and lessons learnt in the year prior, the 2017 project which was conducted in 15 villages involved 600 community members and attracted more than 12,000 people. In addition to the malaria theme, upon discussion with local health authorities, secondary theme (infant vaccination) was added to the 2017 project. We learnt the following lessons from our experience in Cambodia: involving local people including children from the beginning of the project and throughout the process is important; messages should be kept simple; it is necessary to take into consideration practical issues such as location and timing of the activities; and that the project should offer something unique to communities.

Importance of convective parameterization in ENSO predictions

NASA Astrophysics Data System (ADS)

Zhu, Jieshun; Kumar, Arun; Wang, Wanqiu; Hu, Zeng-Zhen; Huang, Bohua; Balmaseda, Magdalena A.

2017-06-01

This letter explored the influence of atmospheric convection scheme on El Niño-Southern Oscillation (ENSO) predictions using a set of hindcast experiments. Specifically, a low-resolution version of the Climate Forecast System version 2 is used for 12 month hindcasts starting from each April during 1982-2011. The hindcast experiments are repeated with three atmospheric convection schemes. All three hindcasts apply the identical initialization with ocean initial conditions taken from the European Centre for Medium-Range Weather Forecasts and atmosphere/land initial states from the National Centers for Environmental Prediction. Assessments indicate a substantial sensitivity of the sea surface temperature prediction skill to the different convection schemes, particularly over the eastern tropical Pacific. For the Niño 3.4 index, the anomaly correlation skill can differ by 0.1-0.2 at lead times longer than 2 months. Long-term simulations are further conducted with the three convection schemes to understand the differences in prediction skill. By conducting heat budget analyses for the mixed-layer temperature anomalies, it is suggested that the convection scheme having the highest skill simulates stronger and more realistic coupled feedbacks related to ENSO. Particularly, the strength of the Ekman pumping feedback is better represented, which is traced to more realistic simulation of surface wind stress. Our results imply that improving the mean state simulations in coupled (ocean-atmosphere) general circulation model (e.g., ameliorating the Intertropical Convergence Zone simulation) might further improve our ENSO prediction capability.

Impact of asthma, exposure period, and filters on human responses during exposures to ozone and its initiated chemistry products.

PubMed

Fadeyi, M O; Tham, K W; Wu, W Y

2015-10-01

The impact of asthma, exposure period, and filter condition downstream of the mixing box of air-conditioning system on building occupants' perceptual response, work performance, and salivary α-amylase secretion during exposures to ozone and its initiated chemistry products is studied. The experiments were conducted in a field environmental chamber (FEC) (240 m(3)) simulating an office environment. Experiments were conducted during periods when the air-handling system operated with new or used pleated panel filters at constant recirculation (7/h) and ventilation (1/h) rates. Average ozone and secondary organic aerosols (ozone-initiated chemistry products) measured during non-asthmatic and asthmatic subjects' 3-h exposures in the FEC were in the ranges approximately 20-37 ppb and approximately 1.6-3 μg/m(3), respectively. Asthmatic subjects' perceived odor intensity and sensory (eye, nose, and throat) irritation ratings were generally lower than those of non-asthmatic subjects, possibly explaining why asthmatic subjects accept perceived air quality more than non-asthmatic subjects. However, asthmatic subjects' perceived physiological-like symptom ratings (flu, chest tightness, and headache) and concentrations of secreted salivary α-amylase were generally higher than those of non-asthmatic subjects. Asthmatic subjects had significantly lower accuracy than non-asthmatic subjects in a task that required higher concentration although they had higher work speed. Filter condition did not make any significant difference for subjects' responses. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Coarsening in Solid-liquid Mixtures: Overview of Experiments on Shuttle and ISS

NASA Technical Reports Server (NTRS)

Duval, Walter M. B.; Hawersaat, Robert W.; Lorik, T.; Thompson, J.; Gulsoy, B.; Voorhees, P. W.

2013-01-01

The microgravity environment on the Shuttle and the International Space Station (ISS) provides the ideal condition to perform experiments on Coarsening in Solid-Liquid Mixtures (CSLM) as deleterious effects such as particle sedimentation and buoyancy-induced convection are suppressed. For an ideal system such as Lead-Tin in which all the thermophysical properties are known, the initial condition in microgravity of randomly dispersed particles with local clustering of solid Tin in eutectic liquid Lead-Tin matrix, permitted kinetic studies of competitive particle growth for a range of volume fractions. Verification that the quenching phase of the experiment had negligible effect of the spatial distribution of particles is shown through the computational solution of the dynamical equations of motion, thus insuring quench-free effects from the coarsened microstructure measurements. The low volume fraction experiments conducted on the Shuttle showed agreement with transient Ostwald ripening theory, and the steady-state requirement of LSW theory was not achieved. More recent experiments conducted on ISS with higher volume fractions have achieved steady-state condition and show that the kinetics follows the classical diffusion limited particle coarsening prediction and the measured 3D particle size distribution becomes broader as predicted from theory.

Experiment data report for Semiscale Mod-1 Test S-05-1 (alternate ECC injection test)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feldman, E. M.; Patton, Jr., M. L.; Sackett, K. E.

Recorded test data are presented for Test S-05-1 of the Semiscale Mod-1 alternate ECC injection test series. These tests are among several Semiscale Mod-1 experiments conducted to investigate the thermal and hydraulic phenomena accompanying a hypothesized loss-of-coolant accident in a pressurized water reactor (PWR) system. Test S-05-1 was conducted from initial conditions of 2263 psia and 544/sup 0/F to investigate the response of the Semiscale Mod-1 system to a depressurization and reflood transient following a simulated double-ended offset shear of the cold leg broken loop piping. During the test, cooling water was injected into the vessel lower plenum to simulatemore » emergency core coolant injection in a PWR, with the flow rate based on system volume scaling.« less

Social science in a stem cell laboratory: what happened when social and life sciences met.

PubMed

Stacey, Glyn; Stephens, Neil

2012-01-01

We describe the experience of conducting intensive social science research at the UK Stem Cell Bank from the viewpoint of both the person conducting the social science research and the Director of the Bank. We detail the initial misunderstandings and concerns held by both and the problems these caused. Then we describe how the relationship developed as the project progressed and shared benefits became apparent. Finally, while acknowledging potential areas of tension between the life and social sciences, we suggest further interaction between the disciplines would prove beneficial for both and speculate as to how this may be achieved. In the discussion we identify a set of learning points from our experience and definitions of social science terminology that may help to inform future engagements between life and social scientists.

Overcoming Practical Challenges to Conducting Clinical Research in the Inpatient Stroke Rehabilitation Setting

PubMed Central

Campbell, Grace B.; Skidmore, Elizabeth R.; Whyte, Ellen M.; Matthews, Judith T.

2015-01-01

There is a shortage of published empirical studies conducted in acute inpatient stroke rehabilitation, though such studies are greatly needed in order to shed light on the most efficacious inpatient stroke rehabilitation interventions. The inherent challenges of inpatient research may dissuade researchers from undertaking this important work. This paper describes our institution’s experience devising practical solutions to research barriers in this setting. Our efforts facilitated five simultaneous inpatient stroke rehabilitation studies, and led to several benefits, including increased effectiveness of research participant identification and enrollment, novel collaborative projects, innovative clinical care initiatives, and enhanced emotional and practical support for patients and their families. We provide recommendations based on lessons learned during our experience, and discuss benefits of this collaboration for our research participants, clinical staff, and the research team. PMID:25775955

Effects of electronic and lattice polarization on the band structure of delafossite transparent conductive oxides.

PubMed

Vidal, Julien; Trani, Fabio; Bruneval, Fabien; Marques, Miguel A L; Botti, Silvana

2010-04-02

We use hybrid functionals and restricted self-consistent GW, state-of-the-art theoretical approaches for quasiparticle band structures, to study the electronic states of delafossite Cu(Al,In)O2, the first p-type and bipolar transparent conductive oxides. We show that a self-consistent GW approximation gives remarkably wider band gaps than all the other approaches used so far. Accounting for polaronic effects in the GW scheme we recover a very nice agreement with experiments. Furthermore, the modifications with respect to the Kohn-Sham bands are strongly k dependent, which makes questionable the common practice of using a scissor operator. Finally, our results support the view that the low energy structures found in optical experiments, and initially attributed to an indirect transition, are due to intrinsic defects in the samples.

Lessons learned from the PMTCT program in Swaziland: challenges with accepting lifelong ART for pregnant and lactating women - a qualitative study.

PubMed

Katirayi, Leila; Chouraya, Caspian; Kudiabor, Kwashie; Mahdi, Mohammed Ali; Kieffer, Mary Pat; Moland, Karen Marie; Tylleskar, Thorkild

2016-10-24

Swaziland has one of the highest HIV prevalence rates in sub-Saharan Africa, 26 % of the adult population is infected with HIV. The prevalence is highest among pregnant women, at 41.1 %. According to Swaziland's prevention of mother-to-child transmission (PMTCT) guidelines, approximately 50 % of pregnant women are eligible for antiretroviral therapy (ART) by CD4 criteria (<350 cells/ml). Studies have shown that most mother-to-child transmission and postnatal deaths occur among women who are eligible for ART. Therefore, ensuring that ART eligible women are initiated on ART is critical for PMTCT and for mother and baby survival. This study provides insight into the challenges of lifelong ART initiation among pregnant women under Option A in Swaziland. We believe that these challenges and lessons learned from initiating women on lifelong ART under Option A are relevant and important to consider during implementation of Option B+. HIV-positive, treatment-eligible, postpartum women and nurses were recruited within maternal and child health (MCH) units using convenience and purposive sampling. Participants came from both urban and rural areas. Focus group discussions (FGDs) and structured interviews using a short answer questionnaire were conducted to gain an understanding of the challenges experienced when initiating lifelong ART. Seven FGDs (of 5-11 participants) were conducted, four FGDs with nurses, two FGDs with women who initiated ART, and one FGD with women who did not initiate ART. A total of 83 interviews were conducted; 50 with women who initiated ART and 33 with women who did not initiate. Data collection with the women was conducted in the local language of SiSwati and data collection with the nurses was done in English. FGDs were audio-recorded and simultaneously transcribed and translated into English. Analysis was conducted using thematic analysis. Transcripts were coded by two researchers in the qualitative software program MAXqda v.10. Thematic findings were illustrated using verbatim quotes which were selected on the basis of being representative of a specific theme. The short-answer interview questionnaire included specific questions about the different steps in the woman's experience initiating ART; therefore the responses for each question were analyzed separately. Findings from the study highlight women feeling overwhelmed by the lifetime commitment of ART, feeling "healthy" when asked to initiate ART, preference for short-course prophylaxis and fear of side effects (body changes). Also, the preference for nurses to determine on an individual basis the number of counseling appointments a woman needs before initiating ART, more information about HIV and ART needed at the community level, and the need to educate men about HIV and ART. Women face a myriad of challenges initiating lifelong ART. Understanding women's concerns will aid in developing effective counseling messages, designing appropriate counseling structures, understanding where additional support is needed in the process of initiating ART, and knowing who to target for community level messages.

Effects of rational-emotive therapy on psychophysiological and reported measures of test anxiety arousal.

PubMed

Barabasz, A F; Barabasz, M

1981-07-01

Developed audio taped lectures, taped therapy session models, and homework assignments designed to reduce irrational beliefs associated with test anxiety within Ellis' rational-emotive therapy (RET) approach. The initial sample consisted of 148 university students. Comparisons with an attention placebo counseling program, which was established to be equally credible by a post-experiment inquiry and a no-treatment group found the RET Ss to show significantly lower skin conductance responses to a test anxiety visualization and lower reported anxiety on a questionnaire. However, skin conductance responses to an alternative test anxiety visualization did not show treatment effects.

Analysis and Inverse Design of the HSR Arrow Wing Configuration with Fuselage, Wing, and Flow Through Nacelles

NASA Technical Reports Server (NTRS)

Krist, Steven E.; Bauer, Steven X. S.

1999-01-01

The design process for developing the natural flow wing design on the HSR arrow wing configuration utilized several design tools and analysis methods. Initial fuselage/wing designs were generated with inviscid analysis and optimization methods in conjunction with the natural flow wing design philosophy. A number of designs were generated, satisfying different system constraints. Of the three natural flow wing designs developed, the NFWAc2 configuration is the design which satisfies the constraints utilized by McDonnell Douglas Aerospace (MDA) in developing a series of optimized configurations; a wind tunnel model of the MDA designed OPT5 configuration was constructed and tested. The present paper is concerned with the viscous analysis and inverse design of the arrow wing configurations, including the effects of the installed diverters/nacelles. Analyses were conducted with OVERFLOW, a Navier-Stokes flow solver for overset grids. Inverse designs were conducted with OVERDISC, which couples OVERFLOW with the CDISC inverse design method. An initial system of overset grids was generated for the OPT5 configuration with installed diverters/nacelles. An automated regridding process was then developed to use the OPT5 component grids to create grids for the natural flow wing designs. The inverse design process was initiated using the NFWAc2 configuration as a starting point, eventually culminating in the NFWAc4 design-for which a wind tunnel model was constructed. Due to the time constraints on the design effort, initial analyses and designs were conducted with a fairly coarse grid; subsequent analyses have been conducted on a refined system of grids. Comparisons of the computational results to experiment are provided at the end of this paper.

Ten Years Later: A Follow-Up Study of Professors Still Working after Age 70

ERIC Educational Resources Information Center

Dorfman, Lorraine T.

2009-01-01

Little is known about the impact of the end of mandatory retirement on professors over the long term. This follow-up study investigated the ten-year experience of professors who chose not to retire from a major research university after the elimination of the age 70 mandatory retirement in 1994. The initial interview study was conducted in 1998…

Effects of particle packing on the sintered microstructure

NASA Astrophysics Data System (ADS)

Barringer, E. A.; Bowen, H. K.

1988-04-01

The sintering process is shown to be critically dependent on particle-packing density and porosity uniformity. Sintering experiments were conducted on compacts consisting of monodisperse, spherical TiO2 particles. Densification kinetics and microstructure evolution for two initial packing densities, 55% and 69% of theoretical, were investigated. The lower-density compacts sintered rapidly to theoretical density, yet improved particle-packing density and uniformity significantly enhanced densification.

Reflective Dialogues in Community Music Engagement: An Exploratory Experience in a Singapore Nursing Home and Day-Care Centre for Senior Citizens

ERIC Educational Resources Information Center

Lum, Chee-Hoo

2011-01-01

This study documents a reflective journey of a community music programme initiated by a university music education faculty member and an occupational therapist within the setting of a nursing home and day-care centre in Singapore. Weekly music interaction sessions in conjunction with reminiscence therapy were conducted over a period of five…

Siderophile trace element diffusion in Fe-Ni alloys

NASA Astrophysics Data System (ADS)

Watson, Heather C.; Watson, E. Bruce

2003-09-01

Experiments were performed in a piston cylinder apparatus to characterize the diffusion behavior of the siderophile elements, Mo, Cu, Pd, Au, and Re in solid Fe-Ni alloy (90 wt.% Fe, 10 wt.% Ni). All experiments were conducted at 1 GPa and temperatures ranging from 1175 to 1400 °C. Activation energies of all elements fall between 270 kJ/mol (Cu) and 360 kJ/mol (Mo). Mo, Cu, Pd, and Au all show similar diffusivities at the same conditions, but the diffusivity of Re was consistently close to an order of magnitude lower. Initial experiments on other refractory elements (Os, Pt, and Ir) indicate that their diffusivities are close to or slightly lower than that of Re.

The use of the German V-2 in US for upper atmosphere research

NASA Technical Reports Server (NTRS)

Curtis, S. A.

1979-01-01

Early U.S. space experiments involving the liquid propellant German V-2 are discussed. Although the primary objective of the experiments conducted under project Hermes after World War II was initially the development of missile technology, scientific objectives were soon given the priority. The missile was modified for scientific experiments and the payload increased from 6.8% to 47% between 1946 and 1949. Among other instruments, the payload included a cosmic ray telescope, ionosphere transmitter and spectrograph for solar spectral measurements. While the scientific success of the program established a positive public attitude towards space research, the Upper Atmosphere Research Panel, formed to coordinate the project, set a pattern for future scientific advisory bodies.

[Decomposition dynamics of leaf litter in logging residue of a secondary Castanopsis carlesii plantation and its chemical composition changes].

PubMed

Ren, Wei-ling; Guo, Jian-fen; Wu, Bo-bo; Wan, Jing-juan; Ji, Shu-rong; Liu, Xiao-fei

2015-04-01

A field experiment was conducted to understand the decomposition rates and chemical composition changes of leaf litter in logging residues of a 35-year-old secondary Castanopsis carlesii plantation over a period of one year. Mass loss rate of leaf litter showed an exponential decrease with time from May 2012 to April 2013, with a total 80% loss of initial dry mass. Net potassium (K) release was observed during this period, with only 5% of initial K remained. Nitrogen ( N) featured a pattern of accumulation at the early stage and release later, while phosphorus (P) exhibited a sequence of release, accumulation, and release. The remaining of N and P were 19% and 16% of their initial mass, respectively. The release rate was highest for K and the lowest for N. Decomposition of lignin indicated a trend of release-accumulation-release from May 2012 to October 2012, with no further significant change from November 2012 to the end of the experiment. The concentration of cellulose nearly unchanged during the experiment. The N/P rate increased with decomposition, ranging from 18.6 to 21.1. The lignin/N rate fluctuated greatly at the early stage and then almost stabilized thereafter.

Space Weathering Experiments on Spacecraft Materials

NASA Technical Reports Server (NTRS)

Cooper, R.; Cowardin, H.; Engelhar, D.; Plis, Elena; Hoffman, R.

2017-01-01

A project to investigate space environment effects on specific materials with interest to remote sensing was initiated in 2016. The goal of the project is to better characterize changes in the optical properties of polymers and Mylar, specifically those found in multi-layered spacecraft insulation, due to electron bombardment. Previous analysis shows that chemical bonds break and potentially reform when exposed to high energy electrons. Among other properties these chemical changes altered the optical reflectance as documented in laboratory analysis. This paper presents results of the initial experiment results focused on the exposure of materials to various fluences of high energy electrons, used to simulate a portion of the geosynchronous space environment. The paper illustrates how the spectral reflectance changes as a function of time on orbit with respect to GEO environmental factors and investigates the survivability of the material after multiple electron doses. These results provide a baseline for analysis of aging effects on satellite systems used for remote sensing. They also provide preliminary analysis on what materials are most likely to encompass the high area-to-mass population of space debris in the geosynchronous environment. Lastly, the paper provides the results of the initial experimentation as a proof of concept for space aging on polymers and Mylar for conducting more experiments with a larger subset of spacecraft materials.

Shear Stress Sensing with Elastic Microfence Structures

NASA Technical Reports Server (NTRS)

Cisotto, Alexxandra; Palmieri, Frank L.; Saini, Aditya; Lin, Yi; Thurman, Christopher S; Kim, Jinwook; Kim, Taeyang; Connell, John W.; Zhu, Yong; Gopalarathnam, Ashok;

Initial results of stimulated radiation measurements during the HAARP campaign of September 2017

NASA Astrophysics Data System (ADS)

Yellu, A. D.; Scales, W. A.; Mahmoudian, A.; Siefring, C.; Bernhardt, P.

2018-02-01

Initial results of stimulated electromagnetic radiation observed during an ionosphere heating experiment conducted at the High-Frequency Active Auroral Program (HAARP) facility are reported. The frequency of the pump wave used in the heating is in the neighborhood of the third harmonic of the electron cyclotron frequency, and of interest are simulated electromagnetic emissions (SEEs) within ? kHz of the heating frequency known as narrowband SEE (NSEE) and the commonly known wideband SEE (WSEE) which occur within ? kHz of the pump wave frequency. With the transmit power maintained at maximum, and all other conditions of the experiment invariable, the characteristics of NSEE and WSEE as time progresses from the time the transmitter is switched on are detailed in the results. The dependence of the characteristics of the NSEE and WSEE with temporal evolution into the heating cycle are observed to be fundamentally different.

Teaching severely multihandicapped students to put on their own hearing aids.

PubMed Central

Tucker, D J; Berry, G W

1980-01-01

Two experiments were conducted with six severely multihandicapped students with hearing impairments to: (a) train the six students to put on their own hearing aids independently, and (b) provide an empirical evaluation of a comprehensive instructional program for putting on a hearing aid by assessing acquisition, maintenance, and generalization of that skill across environments. All six students acquired the skill rapidly, with two students requiring remedial training on one step of the program. Because for two of the original three students the newly learned skill failed initially to generalize to other environments, a second experiment was initiated to assess generalization across environments as well as to replicate the efficiency of the acquisition program. When a variation of the multiple-probe baseline technique was used, the behavior of three additional students generalized to other settings without direct training in those settings. PMID:6444931

The effect of physical parameterizations and initial data on the numerical prediction of the President's Day cyclone

NASA Technical Reports Server (NTRS)

Atlas, R.

1984-01-01

Results are presented from a series of forecast experiments which were conducted to assess the importance of large-scale dynamical processes, diabatic heating, and initial data to the prediction of the President's Day cyclone. The synoptic situation and NMC model forecasts for this case are summarized, and the analysis/forecast system and experiments are described. The GLAS Model forecast from the GLAS analysis at 0000 GMT 18 February is found to have correctly predicted intense coastal cyclogenesis and heavy precipitation. A forecast with surface heat and moisture fluxes eliminated failed to predict any cyclogenesis while a similar forecast with only the surface moisture flux excluded showed weak development. Diabatic heating resulting from oceanic fluxes significantly contributed to the generation of low-level cyclonic vorticity and the intensification and slow rate of movement of an upper level ridge over the western Atlantic.

Clay-clast aggregates: A new textural evidence for seismic fault sliding?

NASA Astrophysics Data System (ADS)

Boutareaud, Sébastien; Calugaru, Dan-Gabriel; Han, Raehee; Fabbri, Olivier; Mizoguchi, Kazuo; Tsutsumi, Akito; Shimamoto, Toshihiko

2008-03-01

To determine the processes responsible for slip-weakening in clayey gouge zones, rotary-shear experiments were conducted at seismic slip rates (equivalent to 0.9 and 1.3 m/s) at 0.6 MPa normal stress on a natural clayey gouge for saturated and non-saturated initial conditions. The mechanical behavior of the simulated faults shows a reproducible slip-weakening behavior, whatever initial moisture conditions. Examination of gouge obtained at the residual friction stage in saturated and non-saturated initial conditions allows the definition of two types of microstructures: a foliated type reflecting strain localization, and a non-foliated type composed of spherical aggregates. Friction experiments demonstrate that liquid-vapor transition of water within gouge due to frictional heating has a high capacity to explain the formation of spherical aggregates in the first meters of displacement. This result suggests that the occurrence of spherical aggregates in natural clayey fault gouges can constitute a new textural evidence for shallow depth pore water phase transition at seismic slip velocity and consequently for past seismic fault sliding.

Rewetting of Monogroove Heat Pipe in Space Station Radiators

NASA Technical Reports Server (NTRS)

Chan, S. H.; Shen, Ting Rong; Blake, John

1996-01-01

Experimental investigation of the rewetting characteristics of a uniformly heated grooved surface was performed, the results of which are presented in this work. It was found that, for a rewetting fluid of 2-propanol, the rewetting temperature was approx. 93-96 C for the upward-facing case and about 2 C lower for the downwardfacing case. When the initial plate temperature was higher than the rewetting temperature, the rewetting speed decreased with the initial plate temperature. The rewetting speed is also faster in the upward-facing case than in the downward-facing case for the same initial plate temperatures, which indicates a gravitational effect on rewetting. This trend is found to be consistent with the previously investigated end heating condition. The rewetting distance that is predicted by the conduction controlled model is found to be in fair agreement with the experimental data. Also, an apparatus that enables experiments to be performed in a reduced gravitational environment has been built and experiments are currently being performed. The design of this apparatus is presented along with preliminary data.

Women who inject drugs in the republic of georgia: in their own words.

PubMed

Kirtadze, Irma; Otiashvili, David; O'Grady, Kevin; Zule, William; Krupitsky, Evgeny; Wechsberg, Wendee; Jones, Hendrée

2015-01-01

This study describes the initiation and maintenance of illicit drug use, risky behaviors, and the substance use treatment experiences of women in Georgia. Qualitative interviews with 55 drug-using women (mean age 36 years; SD = 9.52), were conducted during April-September 2011. Participants presented diverse histories of drug use initiation and substance use, risky behaviors, and drug treatment participation. All participants reported concurrent use of different substances, including home-produced injection preparations. Women described their experiences of both the positive and negative effects (physical and psychological) that they attributed to their use of drugs. Findings enrich our understanding of the environment in which substance use is initiated and maintained in a female population in Georgia, and illustrate the importance of culture and the role of social factors in the development of injection drug use. Results can provide direction for tailoring the development of interventions for substance use disorders, public policy discussions regarding the treatment of women who use drugs, and future research on substance use among women in Georgia and other post-Soviet nations.

Response surface methodological approach for the decolorization of simulated dye effluent using Aspergillus fumigatus fresenius.

PubMed

Sharma, Praveen; Singh, Lakhvinder; Dilbaghi, Neeraj

2009-01-30

The aim of our research was to study, effect of temperature, pH and initial dye concentration on decolorization of diazo dye Acid Red 151 (AR 151) from simulated dye solution using a fungal isolate Aspergillus fumigatus fresenius have been investigated. The central composite design matrix and response surface methodology (RSM) have been applied to design the experiments to evaluate the interactive effects of three most important operating variables: temperature (25-35 degrees C), pH (4.0-7.0), and initial dye concentration (100-200 mg/L) on the biodegradation of AR 151. The total 20 experiments were conducted in the present study towards the construction of a quadratic model. Very high regression coefficient between the variables and the response (R(2)=0.9934) indicated excellent evaluation of experimental data by second-order polynomial regression model. The RSM indicated that initial dye concentration of 150 mg/L, pH 5.5 and a temperature of 30 degrees C were optimal for maximum % decolorization of AR 151 in simulated dye solution, and 84.8% decolorization of AR 151 was observed at optimum growth conditions.

Understanding the Etiology of Prescription Opioid Abuse: Implications for Prevention and Treatment

PubMed Central

Rigg, Khary K.; Murphy, John W.

2013-01-01

Although studies on the initiation of substance abuse abound, the body of literature on prescription opioid abuse (POA) etiology is small. Little is known about why and how the onset of POA occurs, especially among high-risk populations. In this study we aimed to fill this important knowledge gap by exploring the POA initiation experiences of 90 prescription opioid abusers currently in treatment and their narrative accounts of the circumstances surrounding their POA onset. This research was conducted within a storyline framework, which operates on the premise that the path to drug abuse represents a biography or a process rather than a static condition. Audiotapes of in-depth interviews were transcribed, coded, and thematically analyzed. Analyses revealed the presence of four trajectories leading to POA. This study adds to the limited research on POA etiology by not only illuminating the psychosocial factors that contribute to POA onset, but also by situating initiation experiences within broader life processes. The study findings provide crucial insights to policymakers and interventionists in identifying who is at risk for POA, and more important, when and how to intervene most efficaciously. PMID:23656723

Understanding the etiology of prescription opioid abuse: implications for prevention and treatment.

PubMed

Rigg, Khary K; Murphy, John W

2013-07-01

Although studies on the initiation of substance abuse abound, the body of literature on prescription opioid abuse (POA) etiology is small. Little is known about why and how the onset of POA occurs, especially among high-risk populations. In this study we aimed to fill this important knowledge gap by exploring the POA initiation experiences of 90 prescription opioid abusers currently in treatment and their narrative accounts of the circumstances surrounding their POA onset. This research was conducted within a storyline framework, which operates on the premise that the path to drug abuse represents a biography or a process rather than a static condition. Audiotapes of in-depth interviews were transcribed, coded, and thematically analyzed. Analyses revealed the presence of four trajectories leading to POA. This study adds to the limited research on POA etiology by not only illuminating the psychosocial factors that contribute to POA onset, but also by situating initiation experiences within broader life processes. The study findings provide crucial insights to policymakers and interventionists in identifying who is at risk for POA, and more important, when and how to intervene most efficaciously.

Surface-conductivity enhancement of PMMA by keV-energy metal-ion implantation

NASA Astrophysics Data System (ADS)

Bannister, M. E.; Hijazi, H.; Meyer, H. M.; Cianciolo, V.; Meyer, F. W.

2014-11-01

An experiment has been proposed to measure the neutron electric dipole moment (nEDM) with high precision at the Oak Ridge National Laboratory (ORNL) Spallation Neutron Source. One of the requirements of this experiment is the development of PMMA (Lucite) material with a sufficiently conductive surface to permit its use as a high-voltage electrode while immersed in liquid He. At the ORNL Multicharged Ion Research Facility, an R&D activity is under way to achieve suitable surface conductivity in poly-methyl methacrylate (PMMA) using metal ion implantation. The metal implantation is performed using an electron-cyclotron-resonance (ECR) ion source and a recently developed beam line deceleration module that is capable of providing high flux beams for implantation at energies as low as a few tens of eV. The latter is essential for reaching implantation fluences exceeding 1 × 1016 cm-2, where typical percolation thresholds in polymers have been reported. In this contribution, we report results on initial implantation of Lucite by Ti and W beams with keV energies to average fluences in the range 0.5-6.2 × 1016 cm-2. Initial measurements of surface-resistivity changes are reported as function of implantation fluence, energy, and sample temperature. We also report X-ray photoelectron spectroscopy (XPS) surface and depth profiling measurements of the ion implanted samples, to identify possible correlations between the near surface and depth resolved implanted W concentrations and the measured surface resistivities.

Initial blood storage experiment

NASA Technical Reports Server (NTRS)

Surgenor, Douglas MACN.

1988-01-01

The possibility of conducting experiments with the formed elements of the blood under conditions of microgravity opens up important opportunities to improve the understanding of basic formed element physiology, as well as, contribution to improved preservation of the formed elements for use in transfusion. The physiological, biochemical, and physical changes of the membrane of the erythrocyte, platelet, and leukocyte was studied during storage under two specific conditions: standard blood bank conditions and microgravity, utilizing three FDA approved plastic bags. Storage lesions; red cell storage on Earth; platelet storage on Earth; and leukocyte storage Earth were examined. The interaction of biomaterials and blood cells was studied during storage.

Bridging a High School Science Fair Experience with First Year Undergraduate Research: Using the E-SPART Analyzer to Determine Electrostatic Charge Properties of Compositionally Varied Rock Dust Particles as Terrestrial Analogues to Mars Materials

NASA Technical Reports Server (NTRS)

Scott, A. G.; Williams, W. J. W.; Mazumder, M. K.; Biris, A.; Srirama, P. K.

2005-01-01

NASA missions to Mars confirm presence of surficial particles, as well as dramatic periods of aeolian reworking. Dust deposition on, or infiltration into, exploration equipment such as spacecraft, robotic explorers, solar panel power supplies, and even spacesuits, can pose significant problems such as diminished power collection, short circuits / discharges, and added weight. We report results conducted initially as a science fair project and a study now part of a first year University undergraduate research experience.

Large-Scale Laboratory Experiments of Initiation of Motion and Burial of Objects under Currents and Waves

NASA Astrophysics Data System (ADS)

Landry, B. J.; Wu, H.; Wenzel, S. P.; Gates, S. J.; Fytanidis, D. K.; Garcia, M. H.

2017-12-01

Unexploded ordnances (UXOs) can be found at the bottom of coastal areas as the residue of military wartime activities, training or accidents. These underwater objects are hazards for humans and the coastal environment increasing the need for addressing the knowledge gaps regarding the initiation of motion, fate and transport of UXOs under currents and wave conditions. Extensive experimental analysis was conducted for the initiation of motion of UXOs under various rigid bed roughness conditions (smooth PVC, pitted steel, marbles, gravels and bed of spherical particles) for both unidirectional and oscillatory flows. Particle image velocimetry measurements were conducted under both flow conditions to resolve the flow structure estimate the critical flow conditions for initiation of motion of UXOs. Analysis of the experimental observations shows that the geometrical characteristics of the UXOs, their properties (i.e. volume, mass) and their orientation with respect to the mean flow play an important role on the reorientation and mobility of the examined objects. A novel unified initiation of motion diagram is proposed using an effective/unified hydrodynamic roughness and a new length scale which includes the effect of the projected area and the bed-UXO contact area. Both unidirectional and oscillatory critical flow conditions collapsed into a single dimensionless diagram highlighting the importance and practical applicability of the proposed work. In addition to the rigid bed experiments, the burial dynamics of proud UXOs on a mobile sand bed were also examined. The complex flow-bedform-UXOs interactions were evaluated which highlighted the effect of munition density on burial rate and final burial depth. Burial dynamics and mechanisms for motion were examined for various UXOs types, and results show that, for the case of the low density UXOs under energetic conditions, lateral transport coexists with burial. Prior to burial, UXO re-orientation was also observed depending on the geometric characteristics of the objects.

The influence of media type on attitude toward mobile advertisements over time.

PubMed

Sung, Jungyeon; Cho, Kwangsu

2012-01-01

This study explores the relationships between consumers and mobile advertisements on attitude change over time. Two experiments were used to investigate both immediate and delayed effects of different media types on attitudes toward mobile advertisements. Experiment 1 formulated three types of advertisements corresponding to three media types: text, still pictures, and motion pictures. The results indicate that motion pictures on mobile phones significantly influence consumers' initial attitudes toward advertisements. Experiment 2, focusing on delayed effects, was conducted 4 weeks after Experiment 1. Ninety-five of the 117 participants in Experiment 1 were contacted via cellular phone. The results of Experiment 2 showed a decrease in attitude in relation to motion pictures, whereas an increase in attitude in relation to text and still pictures was observed. The findings were interpreted from the perspectives of media characteristics, consumer behavior, and advertising research.

The Influence of Media Type on Attitude Toward Mobile Advertisements Over Time

PubMed Central

Sung, Jungyeon

2012-01-01

Abstract This study explores the relationships between consumers and mobile advertisements on attitude change over time. Two experiments were used to investigate both immediate and delayed effects of different media types on attitudes toward mobile advertisements. Experiment 1 formulated three types of advertisements corresponding to three media types: text, still pictures, and motion pictures. The results indicate that motion pictures on mobile phones significantly influence consumers' initial attitudes toward advertisements. Experiment 2, focusing on delayed effects, was conducted 4 weeks after Experiment 1. Ninety-five of the 117 participants in Experiment 1 were contacted via cellular phone. The results of Experiment 2 showed a decrease in attitude in relation to motion pictures, whereas an increase in attitude in relation to text and still pictures was observed. The findings were interpreted from the perspectives of media characteristics, consumer behavior, and advertising research. PMID:21988732

Concept Definition Study for In-Space Structural Characterization of a Lightweight Solar Array

NASA Technical Reports Server (NTRS)

Woods-Vedeler, Jessica A.; Pappa, Richard S.; Jones, Thomas W.; Spellman, Regina; Scott, Willis; Mockensturm, Eric M.; Liddle, Donn; Oshel, Ed; Snyder, Michael

2002-01-01

A Concept Definition Study (CDS) was conducted to develop a proposed "Lightweight High-Voltage Stretched-Lens Concentrator Solar Array Experiment" under NASA's New Millennium Program Space Technology-6 (NMP ST-6) activity. As part of a multi-organizational team, NASA Langley Research Center's role in this proposed experiment was to lead Structural Characterization of the solar array during the flight experiment. In support of this role, NASA LaRC participated in the CDS to de.ne an experiment for static, dynamic, and deployment characterization of the array. In this study, NASA LaRC traded state-of-the-art measurement approaches appropriate for an in-space, STS-based flight experiment, provided initial analysis and testing of the lightweight solar array and lens elements, performed a lighting and photogrammetric simulation in conjunction with JSC, and produced an experiment concept definition to meet structural characterization requirements.

Removing but not adding elements of a context affects generalization of instrumental responses.

PubMed

Bernal-Gamboa, Rodolfo; Nieto, Javier; Uengoer, Metin

2018-01-05

Three experiments with rats investigated whether adding or removing elements of a context affects generalization of instrumental behavior. Each of the experiments used a free operant procedure. In Experiments 1 and 2, rats were trained to press a lever for food in a distinctive context. Then, transfer of lever pressing was tested in a context created either by adding an element to the context of initial acquisition or by removing one of the acquisition context's elements. In Experiment 3, a similar generalization test was conducted after rats received acquisition and extinction within the same context. For Experiments 1 and 2, we observed that removing elements from the acquisition context disrupted acquisition performance, whereas the addition of elements to the context did not. Experiment 3 revealed that removing elements from but not adding elements to the original context improved extinction performance. Our results are consistent with an elemental view of context representation.

Heteromeric Kv7.2/7.3 channels differentially regulate action potential initiation and conduction in neocortical myelinated axons.

PubMed

Battefeld, Arne; Tran, Baouyen T; Gavrilis, Jason; Cooper, Edward C; Kole, Maarten H P

2014-03-05

Rapid energy-efficient signaling along vertebrate axons is achieved through intricate subcellular arrangements of voltage-gated ion channels and myelination. One recently appreciated example is the tight colocalization of K(v)7 potassium channels and voltage-gated sodium (Na(v)) channels in the axonal initial segment and nodes of Ranvier. The local biophysical properties of these K(v)7 channels and the functional impact of colocalization with Na(v) channels remain poorly understood. Here, we quantitatively examined K(v)7 channels in myelinated axons of rat neocortical pyramidal neurons using high-resolution confocal imaging and patch-clamp recording. K(v)7.2 and 7.3 immunoreactivity steeply increased within the distal two-thirds of the axon initial segment and was mirrored by the conductance density estimates, which increased from ~12 (proximal) to 150 pS μm(-2) (distal). The axonal initial segment and nodal M-currents were similar in voltage dependence and kinetics, carried by K(v)7.2/7.3 heterotetramers, 4% activated at the resting membrane potential and rapidly activated with single-exponential time constants (~15 ms at 28 mV). Experiments and computational modeling showed that while somatodendritic K(v)7 channels are strongly activated by the backpropagating action potential to attenuate the afterdepolarization and repetitive firing, axonal K(v)7 channels are minimally recruited by the forward-propagating action potential. Instead, in nodal domains K(v)7.2/7.3 channels were found to increase Na(v) channel availability and action potential amplitude by stabilizing the resting membrane potential. Thus, K(v)7 clustering near axonal Na(v) channels serves specific and context-dependent roles, both restraining initiation and enhancing conduction of the action potential.

Heteromeric Kv7.2/7.3 Channels Differentially Regulate Action Potential Initiation and Conduction in Neocortical Myelinated Axons

PubMed Central

Battefeld, Arne; Tran, Baouyen T.; Gavrilis, Jason; Cooper, Edward C.

2014-01-01

Rapid energy-efficient signaling along vertebrate axons is achieved through intricate subcellular arrangements of voltage-gated ion channels and myelination. One recently appreciated example is the tight colocalization of Kv7 potassium channels and voltage-gated sodium (Nav) channels in the axonal initial segment and nodes of Ranvier. The local biophysical properties of these Kv7 channels and the functional impact of colocalization with Nav channels remain poorly understood. Here, we quantitatively examined Kv7 channels in myelinated axons of rat neocortical pyramidal neurons using high-resolution confocal imaging and patch-clamp recording. Kv7.2 and 7.3 immunoreactivity steeply increased within the distal two-thirds of the axon initial segment and was mirrored by the conductance density estimates, which increased from ∼12 (proximal) to 150 pS μm−2 (distal). The axonal initial segment and nodal M-currents were similar in voltage dependence and kinetics, carried by Kv7.2/7.3 heterotetramers, 4% activated at the resting membrane potential and rapidly activated with single-exponential time constants (∼15 ms at 28 mV). Experiments and computational modeling showed that while somatodendritic Kv7 channels are strongly activated by the backpropagating action potential to attenuate the afterdepolarization and repetitive firing, axonal Kv7 channels are minimally recruited by the forward-propagating action potential. Instead, in nodal domains Kv7.2/7.3 channels were found to increase Nav channel availability and action potential amplitude by stabilizing the resting membrane potential. Thus, Kv7 clustering near axonal Nav channels serves specific and context-dependent roles, both restraining initiation and enhancing conduction of the action potential. PMID:24599470

Computational Study of the Richtmyer-Meshkov Instability with a Complex Initial Condition

NASA Astrophysics Data System (ADS)

McFarland, Jacob; Reilly, David; Greenough, Jeffrey; Ranjan, Devesh

2014-11-01

Results are presented for a computational study of the Richtmyer-Meshkov instability with a complex initial condition. This study covers experiments which will be conducted at the newly-built inclined shock tube facility at the Georgia Institute of Technology. The complex initial condition employed consists of an underlying inclined interface perturbation with a broadband spectrum of modes superimposed. A three-dimensional staggered mesh arbitrary Lagrange Eulerian (ALE) hydrodynamics code developed at Lawerence Livermore National Laboratory called ARES was used to obtain both qualitative and quantitative results. Qualitative results are discussed using time series of density plots from which mixing width may be extracted. Quantitative results are also discussed using vorticity fields, circulation components, and energy spectra. The inclined interface case is compared to the complex interface case in order to study the effect of initial conditions on shocked, variable-density flows.

From the past to the future: Integrating work experience into the design process.

PubMed

Bittencourt, João Marcos; Duarte, Francisco; Béguin, Pascal

2017-01-01

Integrating work activity issues into design process is a broadly discussed theme in ergonomics. Participation is presented as the main means for such integration. However, a late participation can limit the development of both project solutions and future work activity. This article presents the concept of construction of experience aiming at the articulated development of future activities and project solutions. It is a non-teleological approach where the initial concepts will be transformed by the experience built up throughout the design process. The method applied was a case study of an ergonomic participation during the design of a new laboratory complex for biotechnology research. Data was obtained through analysis of records in a simulation process using a Lego scale model and interviews with project participants. The simulation process allowed for developing new ways of working and generating changes in the initial design solutions, which enable workers to adopt their own developed strategies for conducting work more safely and efficiently in the future work system. Each project decision either opens or closes a window of opportunities for developing a future activity. Construction of experience in a non-teleological design process allows for understanding the consequences of project solutions for future work.

Nature gives us strength: exposure to nature counteracts ego-depletion.

PubMed

Chow, Jason T; Lau, Shun

2015-01-01

Previous research rarely investigated the role of physical environment in counteracting ego-depletion. In the present research, we hypothesized that exposure to natural environment counteracts ego-depletion. Three experiments were conducted to test this hypothesis. In Experiment 1, initially depleted participants who viewed pictures of nature scenes showed greater persistence on a subsequent anagram task than those who were given a rest period. Experiment 2 expanded upon this finding by showing that natural environment enhanced logical reasoning performance after ego-depleting task. Experiment 3 adopted a two- (depletion vs. no-depletion) -by-two (nature exposure vs. urban exposure) factorial design. We found that nature exposure moderated the effect of depletion on anagram task performance. Taken together, the present studies offer a viable and novel strategy to mitigate the negative impacts of ego-depletion.

Extinction in multiple contexts: Effects on the rate of extinction and the strength of response recovery.

PubMed

Bustamante, Javier; Uengoer, Metin; Thorwart, Anna; Lachnit, Harald

2016-09-01

In two human predictive-learning experiments, we investigated the effects of extinction in multiple contexts on the rate of extinction and the strength of response recovery. In each experiment, participants initially received acquisition training with a target cue in one context, followed by extinction either in a different context (extinction in a single context) or in three different contexts (extinction in multiple contexts). The results of both experiments showed that conducting extinction in multiple contexts led to higher levels of responding during extinction than did extinction in a single context. Additionally, Experiment 2 showed that extinction in multiple contexts prevented ABC renewal but had no detectable impact on ABA renewal. Our results are discussed within the framework of contemporary learning theories of contextual control and extinction.

Design, Certification, and Deployment of the Colorimetric Water Quality Monitoring Kit (CWQMK)

NASA Technical Reports Server (NTRS)

Gazda, Daniel B.; Nolan, Daniel J.; Rutz, Jeff A.; Schultz, John R.; Siperko, Lorraine M.; Porter, Marc D.; Lipert, Robert J.; Flint, Stephanie M.; McCoy, J. Torin

2010-01-01

In August 2009, an experimental water quality monitoring kit based on Colorimetric Solid Phase Extraction (CSPE) technology was delivered to the International Space Station (ISS) aboard STS-128/17A. The kit, called the Colorimetric Water Quality Monitoring Kit (CWQMK), was flown and deployed as a Station Development Test Objective (SDTO) experiment on the ISS. The goal of the SDTO experiment is to evaluate the acceptability of CSPE technology for routine water quality monitoring on the ISS. This paper provides an overview of the SDTO experiment, as well as a detailed description of the CWQMK hardware and a summary of the testing and analysis conducted to certify the CWQMK for use on the ISS. The initial results obtained from the SDTO experiment are also reported and discussed in detail

Seventeen years of life support courses for nurses: where are we now?

PubMed Central

Heng, Kenneth; Wee, Fong Chi

2017-01-01

The Life Support Course for Nurses (LSCN) equips nurses with the resuscitation skills to be first responders in in-hospital cardiac arrests. Seventeen years after the initiation of the LSCN, a confidential cross-sectional Qualtrics™ survey was conducted in May 2016 on LSCN graduands to assess the following: confidence in nurse-initiated resuscitation post-LSCN; defibrillation experience and outcomes; and perceived barriers and usefulness of the LSCN. The majority of respondents reported that the course was useful and enhanced their confidence in resuscitation. Skills retention can be enhanced by organising frequent team-based resuscitation training. Resuscitation successes should be publicised to help overcome perceived barriers. PMID:28741004

Automated Tow Placement Processing and Characterization of Composites

NASA Technical Reports Server (NTRS)

Prabhakaran, R.

2004-01-01

The project had one of the initial objectives as automated tow placement (ATP), in which a robot was used to place a collimated band of pre-impregnated ribbons or a wide preconsolidated tape onto a tool surface. It was proposed to utilize the Automated Tow Placement machine that was already available and to fabricate carbon fiber reinforced PEEK (polyether-ether-ketone) matrix composites. After initial experiments with the fabrication of flat plates, composite cylinders were to be fabricated. Specimens from the fabricated parts were to be tested for mechanical characterization. A second objective was to conduct various types of tests for characterizing composite specimens cured by different fabrication processes.

Conceptual-level workflow modeling of scientific experiments using NMR as a case study

PubMed Central

Verdi, Kacy K; Ellis, Heidi JC; Gryk, Michael R

2007-01-01

Background Scientific workflows improve the process of scientific experiments by making computations explicit, underscoring data flow, and emphasizing the participation of humans in the process when intuition and human reasoning are required. Workflows for experiments also highlight transitions among experimental phases, allowing intermediate results to be verified and supporting the proper handling of semantic mismatches and different file formats among the various tools used in the scientific process. Thus, scientific workflows are important for the modeling and subsequent capture of bioinformatics-related data. While much research has been conducted on the implementation of scientific workflows, the initial process of actually designing and generating the workflow at the conceptual level has received little consideration. Results We propose a structured process to capture scientific workflows at the conceptual level that allows workflows to be documented efficiently, results in concise models of the workflow and more-correct workflow implementations, and provides insight into the scientific process itself. The approach uses three modeling techniques to model the structural, data flow, and control flow aspects of the workflow. The domain of biomolecular structure determination using Nuclear Magnetic Resonance spectroscopy is used to demonstrate the process. Specifically, we show the application of the approach to capture the workflow for the process of conducting biomolecular analysis using Nuclear Magnetic Resonance (NMR) spectroscopy. Conclusion Using the approach, we were able to accurately document, in a short amount of time, numerous steps in the process of conducting an experiment using NMR spectroscopy. The resulting models are correct and precise, as outside validation of the models identified only minor omissions in the models. In addition, the models provide an accurate visual description of the control flow for conducting biomolecular analysis using NMR spectroscopy experiment. PMID:17263870

Conceptual-level workflow modeling of scientific experiments using NMR as a case study.

PubMed

Verdi, Kacy K; Ellis, Heidi Jc; Gryk, Michael R

2007-01-30

Scientific workflows improve the process of scientific experiments by making computations explicit, underscoring data flow, and emphasizing the participation of humans in the process when intuition and human reasoning are required. Workflows for experiments also highlight transitions among experimental phases, allowing intermediate results to be verified and supporting the proper handling of semantic mismatches and different file formats among the various tools used in the scientific process. Thus, scientific workflows are important for the modeling and subsequent capture of bioinformatics-related data. While much research has been conducted on the implementation of scientific workflows, the initial process of actually designing and generating the workflow at the conceptual level has received little consideration. We propose a structured process to capture scientific workflows at the conceptual level that allows workflows to be documented efficiently, results in concise models of the workflow and more-correct workflow implementations, and provides insight into the scientific process itself. The approach uses three modeling techniques to model the structural, data flow, and control flow aspects of the workflow. The domain of biomolecular structure determination using Nuclear Magnetic Resonance spectroscopy is used to demonstrate the process. Specifically, we show the application of the approach to capture the workflow for the process of conducting biomolecular analysis using Nuclear Magnetic Resonance (NMR) spectroscopy. Using the approach, we were able to accurately document, in a short amount of time, numerous steps in the process of conducting an experiment using NMR spectroscopy. The resulting models are correct and precise, as outside validation of the models identified only minor omissions in the models. In addition, the models provide an accurate visual description of the control flow for conducting biomolecular analysis using NMR spectroscopy experiment.

Selective Laser Sintering of Nano Al2O3 Infused Polyamide

PubMed Central

Warnakula, Anthony; Singamneni, Sarat

2017-01-01

Nano Al2O3 polyamide composites are evaluated for processing by selective laser sintering. A thermal characterization of the polymer composite powders allowed us to establish the possible initial settings. Initial experiments are conducted to identify the most suitable combinations of process parameters. Based on the results of the initial trials, more promising ranges of different process parameters could be identified. The post sintering characterization showed evidence of sufficient inter-particle sintering and intra-layer coalescence. While the inter-particle coalescence gradually improved, the porosity levels slightly decreased with increasing laser power. The nano-filler particles tend to agglomerate around the beads along the solid tracks, possibly due to Van der Walls forces. The tensile stress results showed an almost linear increase with increasing nano-filler content. PMID:28773220

Mentoring undergraduate students in neuroscience research: a model system at baldwin-wallace college.

PubMed

Mickley, G Andrew; Kenmuir, Cynthia; Remmers-Roeber, Dawn

2003-01-01

As neuroscience research and discovery undergoes phenomenal growth worldwide, undergraduate students are seeking complete laboratory experiences that go beyond the classic classroom curriculum and provide mentoring in all aspects of science. Stock, in-class, laboratory experiences with known outcomes are less desirable than discovery-based projects in which students become full partners with faculty in the design, conduct and documentation of experiments that find their way into the peer-reviewed literature. The challenges of providing such experiences in the context of a primarily undergraduate institution (PUI) can be daunting. Faculty teaching loads are high, and student time is spread over a variety of courses and co-curricular activities. In this context, undergraduates are often reluctant, or ill equipped, to take individual initiative to generate and perform empirical studies. They are more likely to become involved in a sustained, faculty-initiated research program. This paper describes such a program at Baldwin-Wallace College. Students frequently start their laboratory activities in the freshman or sophomore year and enter into a system of faculty and peer mentoring that leads them to experience all aspects of the research enterprise. Students begin with learning basic laboratory tasks and may eventually achieve the status of "Senior Laboratory Associate" (SLA). SLAs become involved in laboratory management, training of less-experienced students, manuscript preparation, and grant proposal writing. The system described here provides a structured, but encouraging, community in which talented undergraduates can develop and mature as they are mentored in the context of a modern neuroscience laboratory. Retention is very good - as most students continue their work in the laboratory for 2-3 years. Student self-reports regarding their growth and satisfaction with the experiences in the laboratory have been excellent and our neuroscience students' acceptance rate in graduate, medical and veterinary schools has been well above the College average. The system also fosters faculty productivity and satisfaction in the context of the typical challenges of conducting research at a PUI.

Experiences in conducting multiple community-based HIV prevention trials among women in KwaZulu-Natal, South Africa

PubMed Central

2010-01-01

Background South Africa, with its scientific capacity, good infrastructure and high HIV incidence rates, is ideally positioned to conduct large-scale HIV prevention trials. The HIV Prevention Research Unit of the South African Medical Research Council conducted four phase III and one phase IIb trials of women-initiated HIV prevention options in KwaZulu-Natal between 2003 and 2009. A total of 7046 women participated, with HIV prevalence between 25% and 45% and HIV incidence ranging from 4.5-9.1% per year. Unfortunately none of the interventions tested had any impact on reducing the risk of HIV acquisition; however, extremely valuable experience was gained, lessons learned and capacity built, while the communities gained associated benefits. Experience Our experience in conducting these trials ranged from setting up community partnerships to developing clinical research sites and dissemination of trial results. Community engagement included setting up community-based research sites with approval from both political and traditional leaders, and developing community advisory groups to assist with the research process. Community-wide education on HIV/sexually transmitted infection prevention, treatment and care was provided to over 90 000 individuals. Myths and misconceptions were addressed through methods such as anonymous suggestion boxes in clinic waiting areas and intensive education and counselling. Attempts were made to involve male partners to foster support and facilitate recruitment of women. Peer educator programmes were initiated to provide ongoing education and also to facilitate recruitment of women to the trials. Recruitment strategies such as door-to-door recruitment and community group meetings were initiated. Over 90% of women enrolled were retained. Community benefits from the trial included education on HIV prevention, treatment and care and provision of ancillary care (such as Pap smears, reproductive health care and referral for chronic illnesses). Social benefits included training of home-based caregivers and sustainable ongoing HIV prevention education through peer educator programmes. Challenges Several challenges were encountered, including manipulation by participants of their eligibility criteria in order to enroll in the trial. Women attempted to co-enroll in multiple trials to benefit from financial reimbursements and individualised care. The trials became ethically challenging when participants refused to take up referrals for care due to stigma, denial of their HIV status and inadequate health infrastructure. Lack of disclosure of HIV status to partners and family members was particularly challenging. Some of the ethical dilemmas put to the test our responsibility as researchers and our obligation to provide health care to research participants. Conclusion Conducting these five trials in a period of six years provided us with invaluable insights into trial implementation, community participation, recruitment and retention, provision of care and dissemination of trial results. The critical mass of scientists trained as clinical trialists will continue to address the relentless HIV epidemic in our setting and ensure our commitment to finding a biomedical HIV prevention option for women in the future. PMID:20416063

Accelerating the connection between experiments and models: The FACE-MDS experience

NASA Astrophysics Data System (ADS)

Norby, R. J.; Medlyn, B. E.; De Kauwe, M. G.; Zaehle, S.; Walker, A. P.

2014-12-01

The mandate is clear for improving communication between models and experiments to better evaluate terrestrial responses to atmospheric and climatic change. Unfortunately, progress in linking experimental and modeling approaches has been slow and sometimes frustrating. Recent successes in linking results from the Duke and Oak Ridge free-air CO2 enrichment (FACE) experiments with ecosystem and land surface models - the FACE Model-Data Synthesis (FACE-MDS) project - came only after a period of slow progress, but the experience points the way to future model-experiment interactions. As the FACE experiments were approaching their termination, the FACE research community made an explicit attempt to work together with the modeling community to synthesize and deliver experimental data to benchmark models and to use models to supply appropriate context for the experimental results. Initial problems that impeded progress were: measurement protocols were not consistent across different experiments; data were not well organized for model input; and parameterizing and spinning up models that were not designed for simulating a specific site was difficult. Once these problems were worked out, the FACE-MDS project has been very successful in using data from the Duke and ORNL FACE experiment to test critical assumptions in the models. The project showed, for example, that the stomatal conductance model most widely used in models was supported by experimental data, but models did not capture important responses such as increased leaf mass per unit area in elevated CO2, and did not appropriately represent foliar nitrogen allocation. We now have an opportunity to learn from this experience. New FACE experiments that have recently been initiated, or are about to be initiated, include a eucalyptus forest in Australia; the AmazonFACE experiment in a primary, tropical forest in Brazil; and a mature oak woodland in England. Cross-site science questions are being developed that will have a strong modeling framework, and modelers and experimentalists will work to establish common measurement protocols and data format. By starting the model-experiment connection early and learning from our past experiences, we expect to significantly shorten the time lags between advances in process-oriented studies and large-scale models.

2D Doppler backscattering using synthetic aperture microwave imaging of MAST edge plasmas

NASA Astrophysics Data System (ADS)

Thomas, D. A.; Brunner, K. J.; Freethy, S. J.; Huang, B. K.; Shevchenko, V. F.; Vann, R. G. L.

2016-02-01

Doppler backscattering (DBS) is already established as a powerful diagnostic; its extension to 2D enables imaging of turbulence characteristics from an extended region of the cut-off surface. The Synthetic Aperture Microwave Imaging (SAMI) diagnostic has conducted proof-of-principle 2D DBS experiments of MAST edge plasma. SAMI actively probes the plasma edge using a wide (±40° vertical and horizontal) and tuneable (10-34.5 GHz) beam. The Doppler backscattered signal is digitised in vector form using an array of eight Vivaldi PCB antennas. This allows the receiving array to be focused in any direction within the field of view simultaneously to an angular range of 6-24° FWHM at 10-34.5 GHz. This capability is unique to SAMI and is a novel way of conducting DBS experiments. In this paper the feasibility of conducting 2D DBS experiments is explored. Initial observations of phenomena previously measured by conventional DBS experiments are presented; such as momentum injection from neutral beams and an abrupt change in power and turbulence velocity coinciding with the onset of H-mode. In addition, being able to carry out 2D DBS imaging allows a measurement of magnetic pitch angle to be made; preliminary results are presented. Capabilities gained through steering a beam using a phased array and the limitations of this technique are discussed.

The lived experiences of resilience in Iranian adolescents living in residential care facilities: A hermeneutic phenomenological study.

PubMed

Nourian, Manijeh; Shahbolaghi, Farahnaz Mohammadi; Tabrizi, Kian Nourozi; Rassouli, Maryam; Biglarrian, Akbar

2016-01-01

Resilience is one of the main factors affecting human health, and perceiving its meaning for high-risk adolescents is of particular importance in initiating preventive measures and providing resilience care. This qualitative study was conducted to explain the meaning of resilience in the lived experiences of Iranian adolescents living in governmental residential care facilities. This study was conducted using the hermeneutic phenomenological method. Semi-structured interviews were conducted with eight adolescents aged 13-17 living in governmental residential care facilities of Tehran province affiliated to the Welfare Organization of Iran who articulated their experiences of resilience. Sampling lasted from May 2014 to July 2015 and continued until new themes were no longer emerging. The researchers analyzed the verbatim transcripts using Van Manen's six-step method of phenomenology. The themes obtained in this study included "going through life's hardships," "aspiring for achievement," "self-protection," "self-reliance," and "spirituality." Our study indicates that the meaning of resilience coexists with self-reliance in adolescents' lived experiences. Adolescents look forward to a better future. They always trust God in the face of difficulties and experience resilience by keeping themselves physically and mentally away from difficulties. Adverse and bitter experiences of the past positively affected their positive view on life and its difficulties and also their resilience. The five themes that emerged from the findings describe the results in detail. The findings of this study enable nurses, health administrators, and healthcare providers working with adolescents to help this vulnerable group cope better with their stressful life conditions and improve their health through increasing their capacity for resilience.

‘Crisis’ and ‘Everyday’ Initiators: A Qualitative Study of Coercion and Agency in the Context of Methadone Maintenance Treatment Initiation

PubMed Central

Damon, Will; Small, Will; Anderson, Solanna; Maher, Lisa; Wood, Evan; Kerr, Thomas; McNeil, Ryan

2016-01-01

Introduction and Aims Patient attrition is common among people enrolled in methadone maintenance treatment (MMT) programs and most pronounced during the first year of treatment. However, the experiences of patients initiating MMT have been overlooked in the literature. This study explores experiences of MMT initiation among MMT patients, focusing on contextual influences on MMT initiation and perceptions of MMT and their subsequent influence on treatment retention. Design and Methods Semi-structured qualitative interviews were conducted with 39 MMT patients in Vancouver, Canada. Individuals reporting enrolment in MMT were recruited from within two ongoing cohort studies comprised of people who use drugs. Interview transcripts were analysed using an inductive and iterative approach. Results Two groups of MMT initiators were identified: (i) ‘crisis initiators’ prescribed methadone following critical transition events, such as incarceration or pregnancy; and (ii) ‘everyday initiators’ enrolled in MMT as part of routine healthcare utilisation. While most ‘crisis initiators’ and some ‘everyday initiators’ described experiencing coercion during MMT initiation, ‘crisis initiators’ were further subjected to the coercive leveraging of their vulnerability to motivate ‘consent’ for MMT. ‘Crisis initiators’ developed negative views towards MMT and were more likely to discontinue treatment. Long-standing patient– provider relationships and open dialogue were associated with more positive views regarding MMT, regardless of the circumstances of initiation. Discussion and Conclusion Findings underscore the need for clear and effective communication regarding treatment regimens and expectations during MMT initiation. Furthermore, training in trauma-informed care may help reduce perceptions of coercion and rates of early treatment termination. PMID:27126765

Breakdown pressures and characteristic flaw sizes during fluid injection experiments in shale at elevated confining pressures.

NASA Astrophysics Data System (ADS)

Chandler, M.; Mecklenburgh, J.; Rutter, E. H.; Taylor, R.; Fauchille, A. L.; Ma, L.; Lee, P. D.

2017-12-01

Fracture propagation trajectories in gas-bearing shales depend on the interaction between the anisotropic mechanical properties of the shale and the anisotropic in-situ stress field. However, there is a general paucity of available experimental data on their anisotropic mechanical, physical and fluid-flow properties, especially at elevated confining pressures. A suite of mechanical, flow and elastic measurements have been made on two shale materials, the Whitby mudrock and the Mancos shale (an interbedded silt and mudstone), as well as Pennant sandstone, an isotropic baseline and tight-gas sandstone analogue. Mechanical characterization includes standard triaxial experiments, pressure-dependent permeability, brazilian disk tensile strength, and fracture toughness determined using double-torsion experiments. Elastic characterisation was performed through ultrasonic velocities determined using a cross-correlation method. Additionally, we report the results of laboratory-scale fluid injection experiments for the same materials. Injection experiments involved the pressurisation of a blind-ending central hole in a dry cylindrical sample. Pressurisation is conducted under constant volume-rate control, using silicon oils of varying viscosities. Breakdown pressure is not seen to exhibit a strong dependence on rock type or orientation, and increases linearly with confining pressure. In most experiments, a small drop in the injection pressure record is observed at what is taken to be fracture initiation, and in the Pennant sandstone this is accompanied by a small burst of acoustic energy. The shale materials were acoustically quiet. Breakdown is found to be rapid and uncontrollable after initiation if injection is continued. A simplified 2-dimensional model for explaining this is presented in terms of the stress intensities at the tip of a pressurised crack, and is used alongside the triaxial data to derive a characteristic flaw size from which the fractures have initiated in the borehole wall.

Litter decomposition patterns and dynamics across biomes: Initial results from the global TeaComposition initiative

NASA Astrophysics Data System (ADS)

Djukic, Ika; Kappel Schmidt, Inger; Steenberg Larsen, Klaus; Beier, Claus

2017-04-01

Litter decomposition represents one of the largest fluxes in the global terrestrial carbon cycle and a number of large-scale decomposition experiments have been conducted focusing on this fundamental soil process. However, previous studies were most often based on site-specific litters and methodologies. The contrasting litter and soil types used and the general lack of common protocols still poses a major challenge as it adds major uncertainty to meta-analyses across different experiments and sites. In the TeaComposition initiative, we aim to investigate the potential litter decomposition by using standardized substrates (tea) for comparison of temporal litter decomposition rates across different ecosystems worldwide. To this end, Lipton tea bags (Rooibos and Green Tea) has been buried in the H-A or Ah horizon and incubated over the period of 36 months within 400 sites covering diverse ecosystems in 9 zonobiomes. We measured initial litter chemistry and litter mass loss 3 months after the start of decomposition and linked the decomposition rates to site and climatic conditions as well as to the existing decompositions rates of the local litter. We will present and discuss the outcomes of this study. Acknowledgment: We are thankful to colleagues from more than 300 sites who were participating in the implementation of this initiative and who are not mentioned individually as co-authors yet.

Initial results from a field experiment to support the assessment of fuel treatment effectiveness in reducing wildfire intensity and spread rate

Treesearch

Eric Mueller; Nicholas Skowronski; Kenneth Clark; Robert Kremens; Michael Gallagher; Jan Thomas; Mohamad El Houssami; Alexander Filkod; Bret Butler; John Hom; William Mell; Albert Simeoni

2015-01-01

Hazardous fuel reduction treatments conducted both through prescribed fire and mechanical means are a critical part of the mitigation of wildland fire risk in the United States. The US Federal Government has spent an average of $500t million each year on fuel reduction, from 2002-2012 (Gorte 2011). At present, however, rigorous experimental measurement of the...

Modulation Spectroscopy and Opto Mechanics of Micro Toroidal Resonators

DTIC Science & Technology

2017-08-01

campus at UTRGV, 2) to initiate training of the UTRGV students in nano fabrication and clean room techniques, 3) to conduct experiments with silicon...Email: Volker.Quetschke@utb.edu RPPR Final Report as of 30-Oct-2017 Training Opportunities: During this reporting period PI and his students acquired...Lithography (EBL), Scanning Electron Microscope (SEM), and Reactive Ion-Etching (RIE) techniques. The students involved in this project attended the

Moving Forward with Computational Red Teaming

DTIC Science & Technology

2011-03-01

Within DSTO, his experience lies in the conduct of studies and analysis falling within the needs phase of the capability development cycle for...procedures, and doctrines that each UNCLASSIFIED UNCLASSIFIED of the blue and red teams need to obey are all studied . Domain experts are drawn from...entities including human. See [Bui, Abbass and Bender, 2010] for an initial study on evolving stories for scenarios. Computations: Once a context is

Cooperative Education at LaGuardia Community College: An Assessment and Description of the Initiation of an Innovative Curriculum. Final Report.

ERIC Educational Resources Information Center

Soper Associates, Berne, NY.

La Guardia College (New York) is the only community college in the United States requiring its entire student body to participate in a work-experience program regardless of curriculum choice. This study, conducted by a team of selected consultants, is an assessment of the program based on onsite visits, interviews, and an array of reports and…

Recruitment experience for a pragmatic randomized controlled trial: Using EMR initiatives and minimizing research infrastructure.

PubMed

Joseph, Christine Lm; Ownby, Dennis R; Zoratti, Edward; Johnson, Dayna; Considine, Shannon; Bourgeois, Renee; Melkonian, Christina; Miree, Cheryl; Johnson, Christine Cole; Lu, Mei

2016-01-01

Modernized approaches to multisite randomized controlled trials (RCT) include the use of electronic medical records (EMR) for recruitment, remote data capture (RDC) for multisite data collection, and strategies to reduce the need for research infrastructure. These features facilitate the conduct of pragmatic trials, or trials conducted in "real life" settings. We describe the recruitment experience of an RCT to evaluate a clinic-based intervention targeting urban youth with asthma. Using encounter and prescription databases, a list of potentially-eligible patients was linked to the Epic appointment scheduling system. Patients were enrolled during a scheduled visit and then electronically randomized to a tailored versus generic online intervention. 1146 appointments for 580 eligible patients visiting 5 clinics were identified, of which 45.9% (266/580) were randomized to reach targeted enrollment (n=250). RDC facilitated multisite enrollment. Intervention content was further personalized through real- time entry of asthma medications prescribed at the clinic visit. EMR monitoring helped with recruitment trouble-shooting. Systemic challenges included a system-wide EMR transition and a system-wide reorganization of clinic staffing. Modernized RCTs can accelerate translation of research findings. Electronic initiatives facilitated implementation of this RCT; however, adaptations to recruitment strategies resulted in a more "explanatory" framework. .

Automated surface-scanning detection of pathogenic bacteria on fresh produce

NASA Astrophysics Data System (ADS)

Horikawa, Shin; Du, Songtao; Liu, Yuzhe; Chen, I.-Hsuan; Xi, Jianguo; Crumpler, Michael S.; Sirois, Donald L.; Best, Steve R.; Wikle, Howard C.; Chin, Bryan A.

2017-05-01

This paper investigates the effects of surface-scanning detector position on the resonant frequency and signal amplitude of a wireless magnetoelastic (ME) biosensor for direct pathogen detection on solid surfaces. The experiments were conducted on the surface of a flat polyethylene (PE) plate as a model study. An ME biosensor (1 mm × 0.2 mm × 30 μm) was placed on the PE surface, and a surface-scanning detector was brought close and aligned to the sensor for wireless resonant frequency measurement. The position of the detector was accurately controlled by using a motorized three-axis translation system (i.e., controlled X, Y, and Z positions). The results showed that the resonant frequency variations of the sensor were -125 to +150 Hz for X and Y detector displacements of +/-600 μm and Z displacements of +100 to +500 μm. These resonant frequency variations were small compared to the sensor's initial resonant frequency (< 0.007% of 2.2 MHz initial resonant frequency) measured at the detector home position, indicating high accuracy of the measurement. In addition, the signal amplitude was, as anticipated, found to decrease exponentially with increasing detection distance (i.e., Z distance). Finally, additional experiments were conducted on the surface of cucumbers. Similar results were obtained.

Accommodation requirements for microgravity science and applications research on space station

NASA Technical Reports Server (NTRS)

Uhran, M. L.; Holland, L. R.; Wear, W. O.

1985-01-01

Scientific research conducted in the microgravity environment of space represents a unique opportunity to explore and exploit the benefits of materials processing in the virtual abscence of gravity induced forces. NASA has initiated the preliminary design of a permanently manned space station that will support technological advances in process science and stimulate the development of new and improved materials having applications across the commercial spectrum. A study is performed to define from the researchers' perspective, the requirements for laboratory equipment to accommodate microgravity experiments on the space station. The accommodation requirements focus on the microgravity science disciplines including combustion science, electronic materials, metals and alloys, fluids and transport phenomena, glasses and ceramics, and polymer science. User requirements have been identified in eleven research classes, each of which contain an envelope of functional requirements for related experiments having similar characteristics, objectives, and equipment needs. Based on these functional requirements seventeen items of experiment apparatus and twenty items of core supporting equipment have been defined which represent currently identified equipment requirements for a pressurized laboratory module at the initial operating capability of the NASA space station.

A New Method of High-Precision Positioning for an Indoor Pseudolite without Using the Known Point Initialization.

PubMed

Zhao, Yinzhi; Zhang, Peng; Guo, Jiming; Li, Xin; Wang, Jinling; Yang, Fei; Wang, Xinzhe

2018-06-20

Due to the great influence of multipath effect, noise, clock and error on pseudorange, the carrier phase double difference equation is widely used in high-precision indoor pseudolite positioning. The initial position is determined mostly by the known point initialization (KPI) method, and then the ambiguities can be fixed with the LAMBDA method. In this paper, a new method without using the KPI to achieve high-precision indoor pseudolite positioning is proposed. The initial coordinates can be quickly obtained to meet the accuracy requirement of the indoor LAMBDA method. The detailed processes of the method follows: Aiming at the low-cost single-frequency pseudolite system, the static differential pseudolite system (DPL) method is used to obtain the low-accuracy positioning coordinates of the rover station quickly. Then, the ambiguity function method (AFM) is used to search for the coordinates in the corresponding epoch. The real coordinates obtained by AFM can meet the initial accuracy requirement of the LAMBDA method, so that the double difference carrier phase ambiguities can be correctly fixed. Following the above steps, high-precision indoor pseudolite positioning can be realized. Several experiments, including static and dynamic tests, are conducted to verify the feasibility of the new method. According to the results of the experiments, the initial coordinates with the accuracy of decimeter level through the DPL can be obtained. For the AFM part, both a one-meter search scope and two-centimeter or four-centimeter search steps are used to ensure the precision at the centimeter level and high search efficiency. After dealing with the problem of multiple peaks caused by the ambiguity cosine function, the coordinate information of the maximum ambiguity function value (AFV) is taken as the initial value of the LAMBDA, and the ambiguities can be fixed quickly. The new method provides accuracies at the centimeter level for dynamic experiments and at the millimeter level for static ones.

Fault Wear and Friction Evolution: Experimental Analysis

NASA Astrophysics Data System (ADS)

Boneh, Y.; Chang, J. C.; Lockner, D. A.; Reches, Z.

2011-12-01

Wear is an inevitable product of frictional sliding of brittle rocks as evidenced by the ubiquitous occurrence of fault gouge and slickenside striations. We present here experimental observations designed to demonstrate the relationship between wear and friction and their governing mechanisms. The experiments were conducted with a rotary shear apparatus on solid, ring-shaped rock samples that slipped for displacements up to tens of meters. Stresses, wear and temperature were continuously monitored. We analyzed 86 experiments of Kasota dolomite, Sierra White granite, Pennsylvania quartzite, Karoo gabbro, and Tennessee sandstone at slip velocities ranging from 0.002 to 0.97 m/s, and normal stress from 0.25 to 6.9 MPa. We conducted two types of runs: short slip experiments (slip distance < 25 mm) primarily on fresh, surface-ground samples, designed to analyze initial wear mechanisms; and long slip experiments (slip distance > 3 m) designed to achieve mature wear conditions and to observe the evolution of wear and friction as the fault surfaces evolved. The experiments reveal three wear stages: initial, running-in, and steady-state. The initial stage is characterized by (1) discrete damage striations, the length of which is comparable to total slip , and local pits or plow features; (2) timing and magnitude of fault-normal dilation corresponds to transient changes of normal and shear stresses; and (3) surface roughness increasing with the applied normal stress. We interpret these observations as wear mechanisms of (a) plowing into the fresh rock surfaces; (b) asperity breakage; and (c) asperity climb. The running-in stage is characterized by (1) intense wear-rate over a critical wear distance of Rd = 0.3-2 m; (2) drop of friction coefficient over a weakening distance of Dc = 0.2-4 m; (3) Rd and Dc display positive, quasi-linear relation with each other. We interpret these observations as indicating the organizing of newly-created wear particles into a 'three-body' structure that acts to lubricate the fault (Reches & Lockner, 2010). The steady-state stage is characterized by (1) relatively low wear-rate (approximately 10% of running-in wear-rate) and (2) quasi-constant friction coefficient. These observations suggest only small changes in the gouge layer in term of thickness (100 to 200 microns) and strength in this final stage. The present study indicates that (1) wear by plowing and asperity failure initiate early, during the first few millimeters of slip; and (2) wear and associated gouge formation appear as the controlling factors of friction evolution and fault weakening.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yeager, John D.; Bowden, Patrick R.; Guildenbecher, Daniel R.

The fragment impact response of two plastic-bonded explosive (PBX) formulations was studied using explosively driven aluminum fragments. A generic aluminum-capped detonator generated sub-mm aluminum particles moving at hypersonic velocities. The ability of these fragments to initiate reaction or otherwise damage two PBX materials was assessed using go/no-go experiments at standoff distances of up to 160 mm. Lower density PBX 9407 (RDX-based) was initiable at up to 115 mm, while higher density PBX 9501 (HMX-based) was only initiable at up to 6 mm. Several techniques were used to characterize the size, distribution, and velocity of the particles. Witness plate materials, includingmore » copper and polycarbonate, and backlit high speed video were used to characterize the distribution of particles, finding that the aluminum cap did not fragment homogeneously but rather with larger particles in a ring surrounding finer particles. Finally, precise digital holography experiments were conducted to measure the three-dimensional shape and size of the fastest-moving fragments, which ranged between 100 and 700 μm and traveled between 2.2 and 3.2 km/s. Crucially, these experiments showed variability in the fragmentation in terms of the number of fragments at the leading edge of the fragment field, indicating that both single and multiple shock impacts could be imparted to the target material. As a result, these types of data are critical for safety experiments and hydrocode simulations to quantify shock-to-detonation transition mechanisms and the associated risk-margins for these materials.« less

Fracture behavior of the Space Shuttle thermal protection system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Komine, A.; Kobayashi, A.S.

1983-09-01

Stable crack-growth and fracture-toughness experiments were conducted using precracked specimens machined from LI-900 reusable surface insulation (RSI) tiles of the Space Shuttle thermal protection system (TPS) at room temperature. Similar fracture experiments were conducted on fracture specimens with preexisting cracks at the interface of the tile and the strain isolation pad (SIP). Stable crack growth was not observed in the LI-900 tile fracture specimens which had a fracture toughness of 12.0 kPa sq rt of m. The intermittent subcritical crack growth at the tile-pad interface of the fracture specimens was attributed to successive local pull-outs due to tensile overload inmore » the LI-900 tile and cannot be characterized by linear elastic fracture mechanics. No subcritical interfacial crack growth was observed in the fracture specimens with densified LI-900 tiles where brittle fracture initiated at an interior point away from the densification. 11 references.« less

Dynamic SEM wear studies of tungsten carbide cermets

NASA Technical Reports Server (NTRS)

Brainard, W. A.; Buckley, D. H.

1975-01-01

Dynamic friction and wear experiments were conducted in a scanning electron microscope. The wear behavior of pure tungsten carbide and composite with 6 and 15 weight percent cobalt binder was examined. Etching of the binder was done to selectively determine the role of the binder in the wear process. Dynamic experiments were conducted as the WC and bonded WC cermet surfaces were transversed by a 50 micron radiused diamond stylus. These studies show that the predominant wear process in WC is fracture initiated by plastic deformation. The wear of the etched cermets is similar to pure WC. The presence of the cobalt binder reduces both friction and wear. The cementing action of the cobalt reduces granular separation and promotes a dense polished layer because of its low shear strength film-forming properties. The wear debris generated from unetched surface is approximately the same composition as the bulk.

Experiments in anodic film effects during electrorefining of scrap U-10Mo fuels in support of modeling efforts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van Kleeck, M.; Chemical Sciences and Engineering Division, Argonne National Laboratory, Argonne, IL 60439; Willit, J.

A monolithic uranium molybdenum alloy clad in zirconium has been proposed as a low enriched uranium (LEU) fuel option for research and test reactors, as part of the Reduced Enrichment for Research and Test Reactors program. Scrap from the fuel's manufacture will contain a significant portion of recoverable LEU. Pyroprocessing has been identified as an option to perform this recovery. A model of a pyroprocessing recovery procedure has been developed to assist in refining the LEU recovery process and designing the facility. Corrosion theory and a two mechanism transport model were implemented on a Mat-Lab platform to perform the modeling.more » In developing this model, improved anodic behavior prediction became necessary since a dense uranium-rich salt film was observed at the anode surface during electrorefining experiments. Experiments were conducted on uranium metal to determine the film's character and the conditions under which it forms. The electro-refiner salt used in all the experiments was eutectic LiCl/KCl containing UCl{sub 3}. The anodic film material was analyzed with ICP-OES to determine its composition. Both cyclic voltammetry and potentiodynamic scans were conducted at operating temperatures between 475 and 575 C. degrees to interrogate the electrochemical behavior of the uranium. The results show that an anodic film was produced on the uranium electrode. The film initially passivated the surface of the uranium on the working electrode. At high over potentials after a trans-passive region, the current observed was nearly equal to the current observed at the initial active level. Analytical results support the presence of K{sub 2}UCl{sub 6} at the uranium surface, within the error of the analytical method.« less

Experimental Insights into Multiphase (H2O-CO2) Fluid-Rock Interactions in Geothermal Systems

NASA Astrophysics Data System (ADS)

Kaszuba, J. P.; Lo Re, C.; Martin, J.; McPherson, B. J.; Moore, J. N.

2012-12-01

Integrated hydrothermal experiments and geochemical modeling elucidate fluid-rock interactions and reaction pathways in both natural and anthropogenic systems, including enhanced geothermal systems (EGS) in which CO2 is introduced as a working fluid. Experiments are conducted in rocker bombs and flexible Au-Ti reaction cells. Individual experiments require one to three months to complete; intensive in-situ fluid/gas sampling gauges reaction progress. Investigation of granitic reservoirs and associated vein minerals are broadly based on the Roosevelt Hot Springs thermal area, Utah, USA. The granite consists of subequal amounts of quartz, perthitic K-feldspar (~25% wt% albite and 75% wt% K-feldspar), and oligoclase (An23), and 4 wt% Fe-rich biotite. Vein minerals include epidote and chlorite (clinochlore). Experiments are conducted at 250°C and 25 to 45 MPa. Each experiment uses mineral powders (75 wt% of rock mass, ground to <45 um) to increase reactivity and also mineral pieces (0.1-0.7 cm in size) to promote petrologic evaluation of mineral reactions. The water (I ≈ 0.1 molal) initially contains millimolal quantities of SiO2, Al, Ca, Mg, K, SO4, and HCO3 and is designed to be saturated with all of the minerals present at the start of each experiment. Excess CO2 is injected to saturate the water and maintain an immiscible supercritical fluid phase. The entire evolutionary path of the natural system is not replicated at laboratory scales. Instead, experiments define a segment of the reaction path and, in combination with geochemical modeling, provide clear trajectories towards equilibrium. Reaction of granite+water yields illite+zeolite; smectite subsequently precipitates in response to CO2 injection. Reaction of granite+epidote+water yields illite+zeolite+smectite; zeolite does not precipitate after CO2 is injected. Water in all experiments become saturated with chalcedony. Carbonate minerals do not precipitate but are predicted as final equilbrium products. Enhanced Geothermal Systems are expected to follow similar reaction pathways and produce metastable minerals during initial development.

Hospital accreditation: staff experiences and perceptions.

PubMed

Bogh, Søren Bie; Blom, Ane; Raben, Ditte Caroline; Braithwaite, Jeffrey; Thude, Bettina; Hollnagel, Erik; Plessen, Christian von

2018-06-11

Purpose The purpose of this paper is to understand how staff at various levels perceive and understand hospital accreditation generally and in relation to quality improvement (QI) specifically. Design/methodology/approach In a newly accredited Danish hospital, the authors conducted semi-structured interviews to capture broad ranging experiences. Medical doctors, nurses, a quality coordinator and a quality department employee participated. Interviews were audio recorded and subjected to framework analysis. Findings Staff reported that The Danish Healthcare Quality Programme affected management priorities: office time and working on documentation, which reduced time with patients and on improvement activities. Organisational structures were improved during preparation for accreditation. Staff perceived that the hospital was better prepared for new QI initiatives after accreditation; staff found disease specific requirements unnecessary. Other areas benefited from accreditation. Interviewees expected that organisational changes, owing to accreditation, would be sustained and that the QI focus would continue. Practical implications Accreditation is a critical and complete hospital review, including areas that often are neglected. Accreditation dominates hospital agendas during preparation and surveyor visits, potentially reducing patient care and other QI initiatives. Improvements are less likely to occur in areas that other QI initiatives addressed. Yet, accreditation creates organisational foundations for future QI initiatives. Originality/value The authors study contributes new insights into how hospital staff at different organisational levels perceive and understand accreditation.

Initiation process of a thrust fault revealed by analog experiments

NASA Astrophysics Data System (ADS)

Yamada, Yasuhiro; Dotare, Tatsuya; Adam, Juergen; Hori, Takane; Sakaguchi, Hide

2016-04-01

We conducted 2D (cross-sectional) analog experiments with dry sand using a high resolution digital image correlation (DIC) technique to reveal initiation process of a thrust fault in detail, and identified a number of "weak shear bands" and minor uplift prior to the thrust initiation. The observations suggest that the process can be divided into three stages. Stage 1: characterized by a series of abrupt and short-lived weak shear bands at the location where the thrust will be generated later. Before initiation of the fault, the area to be the hanging wall starts to uplift. Stage 2: defined by the generation of the new thrust and its active displacement. The location of the new thrust seems to be constrained by its associated back-thrust, produced at the foot of the surface slope (by the previous thrust). The activity of the previous thrust turns to zero once the new thrust is generated, but the timing of these two events is not the same. Stage 3: characterized by a constant displacement along the (new) thrust. Similar minor shear bands can be seen in the toe area of the Nankai accretionary prism, SW Japan and we can correlate the along-strike variations in seismic profiles to the model results that show the characteristic features in each thrust development stage.

Clinical user experiences of observation and response charts: focus group findings of using a new format chart incorporating a track and trigger system.

PubMed

Elliott, Doug; Allen, Emily; Perry, Lin; Fry, Margaret; Duffield, Christine; Gallagher, Robyn; Iedema, Rick; McKinley, Sharon; Roche, Michael

2015-01-01

Optimising clinical responses to deteriorating patients is an international indicator of acute healthcare quality. Observation charts incorporating track and trigger systems are an initiative to improve early identification and response to clinical deterioration. A suite of track and trigger 'Observation and Response Charts' were designed in Australia and initially tested in simulated environments. This paper reports initial clinical user experiences and views following implementation of these charts in adult general medical-surgical wards. Across eight trial sites, 44 focus groups were conducted with 218 clinical ward staff, mostly nurses, who received training and had used the charts in routine clinical practice for the preceding 2-6 weeks. Transcripts of audio recordings were analysed for emergent themes using an inductive approach. In this exploration of initial user experiences, key emergent themes were: tensions between vital sign 'ranges versus precision' to support decision making; using a standardised 'generalist chart in a range of specialist practice' areas; issues of 'clinical credibility', 'professional autonomy' and 'influences of doctors' when communicating abnormal signs; and 'permission and autonomy' when escalating care according to the protocol. Across themes, participants presented a range of positive, negative or mixed views. Benefits were identified despite charts not always being used up to their optimal design function. Participants reported tensions between chart objectives and clinical practices, revealing mismatches between design characteristics and human staff experiences. Overall, an initial view of 'increased activity/uncertain benefit' was uncovered. Findings particularly reinforced the significant influences of organisational work-based cultures, disciplinary boundaries and interdisciplinary communication on implementation of this new practice chart. Optimal use of all chart design characteristics will be possible when these broader cultural issues are addressed. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Automated Microbial Metabolism Laboratory

NASA Technical Reports Server (NTRS)

1971-01-01

The effect of several environmental parameters on previously developed life detection systems is explored. Initial attempts were made to conduct all the experiments in a moist mode (high soil volume to water volume ratio). However, only labeled release and measurement of ATP were found to be feasible under conditions of low moisture. Therefore, these two life detection experiments were used for most of the environmental effects studies. Three soils, Mojave (California desert), Wyaconda (Maryland, sandy loam) and Victoria Valley (Antarctic desert) were generally used throughout. The environmental conditions studied included: incubation temperature 3 C to 80 C, ultraviolet irradiation of soils, variations in soil/liquid ratio, specific atmospheric gases, various antimetabolites, specific substrates, and variation in pH. An experiment designed to monitor nitrogen metabolism was also investigated.

Experiments on Thermal Convection in Rotating Spherical Shells With Radial Gravity: The Geophysical Fluid Flow Cell

NASA Technical Reports Server (NTRS)

Hart, John E.

1996-01-01

Experiments designed to study the fluid dynamics of buoyancy driven circulations in rotating spherical shells were conducted on the United States Microgravity Laboratory 2 spacelab mission. These experiments address several aspects of prototypical global convection relevant to large scale motions on the Sun, Earth, and on the giant planets. The key feature is the consistent modeling of radially directed gravity in spherical geometry by using dielectric polarization forces. Imagery of the planforms of thermally driven flows for rapidly-rotating regimes shows an initial separation and eventual merger of equatorial and polar convection as the heating (i.e. the Rayleigh number) is increased. At low rotation rates, multiple-states of motion for the same external parameters were observed.

Defining the subjective experience of workload

NASA Technical Reports Server (NTRS)

Hart, S. G.; Childress, M. E.; Bortolussi, M.

1981-01-01

Flight scenarios that represent different types and levels of pilot workload are needed in order to conduct research about, and develop measures of, pilot workload. In order to be useful, however, the workload associated with such scenarios and the component tasks must be determined independently. An initial study designed to provide such information was conducted by asking a panel of general aviation pilots to evaluate flight-related tasks for the overall, perceptual, physical, and cognitive workload they impose. These ratings will provide the nucleus for a data base of flight-related primary tasks that have been independently rated for workload to use in workload assessment research.

Overview of a stirling engine test project

NASA Technical Reports Server (NTRS)

Slaby, J. G.

1980-01-01

Tests were conducted on three Stirling engines ranging in size from 1.33 to 53 horsepower (1 to 40 kW). The tests were directed toward developing alternative, backup component concepts to improve engine efficiency and performance or to reduce costs. Some of the activities included investigating attractive concepts and materials for cooler-regenerator units, installing a jet impingement device on a Stirling engine to determine its potential for improved engine performance, and presenting performance maps for initial characterization of Stirling engines. The experiment results of the tests are presented along with predictions of results of future tests to be conducted on the Stirling engines.

Detection of keyboard vibrations and effects on perceived piano quality.

PubMed

Fontana, Federico; Papetti, Stefano; Järveläinen, Hanna; Avanzini, Federico

2017-11-01

Two experiments were conducted on an upright and a grand piano, both either producing string vibrations or conversely being silent after the initial keypress, while pianists were listening to the feedback from a synthesizer through insulating headphones. In a quality experiment, participants unaware of the silent mode were asked to play freely and then rate the instrument according to a set of attributes and general preference. Participants preferred the vibrating over the silent setup, and preference ratings were associated to auditory attributes of richness and naturalness in the low and middle ranges. Another experiment on the same setup measured the detection of vibrations at the keyboard, while pianists played notes and chords of varying dynamics and duration. Sensitivity to string vibrations was highest in the lowest register and gradually decreased up to note D5. After the percussive transient, the tactile stimuli exhibited spectral peaks of acceleration whose perceptibility was demonstrated by tests conducted in active touch conditions. The two experiments confirm that piano performers perceive vibratory cues of strings mediated by spectral and spatial summations occurring in the Pacinian system in their fingertips, and suggest that such cues play a role in the evaluation of quality of the musical instrument.

Propulsion Integrated Vehicle Health Management Technology Experiment (PITEX) Conducted

NASA Technical Reports Server (NTRS)

Maul, William A.; Chicatelli, Amy K.; Fulton, Christopher E.

2004-01-01

The Propulsion Integrated Vehicle Health Management (IVHM) Technology Experiment (PITEX) is a continuing NASA effort being conducted cooperatively by the NASA Glenn Research Center, the NASA Ames Research Center, and the NASA Kennedy Space Center. It was a key element of a Space Launch Initiative risk-reduction task performed by the Northrop Grumman Corporation in El Segundo, California. PITEX's main objectives are the continued maturation of diagnostic technologies that are relevant to second generation reusable launch vehicle (RLV) subsystems and the assessment of the real-time performance of the PITEX diagnostic solution. The PITEX effort has considerable legacy in the NASA IVHM Technology Experiment for X-vehicles (NITEX) that was selected to fly on the X-34 subscale RLV that was being developed by Orbital Sciences Corporation. NITEX, funded through the Future-X Program Office, was to advance the technology-readiness level of selected IVHM technologies within a flight environment and to begin the transition of these technologies from experimental status into RLV baseline designs. The experiment was to perform realtime fault detection and isolation and suggest potential recovery actions for the X-34 main propulsion system (MPS) during all mission phases by using a combination of system-level analysis and detailed diagnostic algorithms.

Dissociation Behavior of a TEMPO-Active Ester Cross-Linker for Peptide Structure Analysis by Free Radical Initiated Peptide Sequencing (FRIPS) in Negative ESI-MS.

PubMed

Hage, Christoph; Ihling, Christian H; Götze, Michael; Schäfer, Mathias; Sinz, Andrea

2017-01-01

We have synthesized a homobifunctional amine-reactive cross-linking reagent, containing a TEMPO (2,2,6,6-tetramethylpiperidine-1-oxy) and a benzyl group (Bz), termed TEMPO-Bz-linker, to derive three-dimensional structural information of proteins. The aim for designing this novel cross-linker was to facilitate the mass spectrometric analysis of cross-linked products by free radical initiated peptide sequencing (FRIPS). In an initial study, we had investigated the fragmentation behavior of TEMPO-Bz-derivatized peptides upon collision activation in (+)-electrospray ionization collision-induced dissociation tandem mass spectrometry (ESI-CID-MS/MS) experiments. In addition to the homolytic NO-C bond cleavage FRIPS pathway delivering the desired odd-electron product ions, an alternative heterolytic NO-C bond cleavage, resulting in even-electron product ions mechanism was found to be relevant. The latter fragmentation route clearly depends on the protonation of the TEMPO-Bz-moiety itself, which motivated us to conduct (-)-ESI-MS, CID-MS/MS, and MS 3 experiments of TEMPO-Bz-cross-linked peptides to further clarify the fragmentation behavior of TEMPO-Bz-peptide molecular ions. We show that the TEMPO-Bz-linker is highly beneficial for conducting FRIPS in negative ionization mode as the desired homolytic cleavage of the NO-C bond is the major fragmentation pathway. Based on characteristic fragments, the isomeric amino acids leucine and isoleucine could be discriminated. Interestingly, we observed pronounced amino acid side chain losses in cross-linked peptides if the cross-linked peptides contain a high number of acidic amino acids. Graphical Abstract ᅟ.

Impact of microbial activity on the hydraulic properties of fractured chalk.

PubMed

Arnon, Shai; Adar, Eilon; Ronen, Zeev; Yakirevich, Alexander; Nativ, Ronit

2005-02-01

The impact of microbial activity on fractured chalk transmissivity was investigated on a laboratory scale. Long-term experiments were conducted on six fractured chalk cores (20 cm diameter, 23-44 cm long) containing a single natural fracture embedded in a porous matrix. Biodegradation experiments were conducted under various conditions, including several substrate and oxygen concentrations and flow rates. 2,4,6-Tribromophenol (TBP) was used as a model contaminant (substrate). TBP biodegradation efficiency depended mainly on the amount of oxygen. However, under constant oxygen concentration at the core inlet, elevating the flow rates increased the removal rate of TBP. Transmissivity reduction was clearly related to TBP removal rate, following an initial slow decline and a further sharp decrease with time. The fracture's transmissivity was reduced by as much as 97% relative to the initial value, with no leveling off of the clogging process. For the most extreme cases, reductions of 262 and 157 microm in the equivalent hydraulic apertures were recorded for fractures with initial apertures of 495 and 207 microm, respectively. The reductions in fracture transmissivity occurred primarily because of clogging by bacterial cells and extracellular polymeric substances (EPS) produced by the bacteria. Most of the biodegradation activity was concentrated near the fracture inlet, where the most suitable biodegradation conditions (nutrients and oxygen) prevailed, suggesting that the clogging had occurred in that vicinity. The clogging must have changed the structure of the fracture void, thereby reducing the active volume participating in flow and transport processes. This phenomenon caused accelerated transport of non-reactive tracers and doubled the fracture's dispersivity under constant flow rates.

Experiences of Family Members of Dying Patients Receiving Palliative Sedation.

PubMed

Tursunov, Olga; Cherny, Nathan I; Ganz, Freda DeKeyser

2016-11-01

To describe the experience of family members of patients receiving palliative sedation at the initiation of treatment and after the patient has died and to compare these experiences over time.
. Descriptive comparative study.
. Oncology ward at Shaare Zedek Medical Center in Jerusalem, Israel.
. A convenience sample of 34 family members of dying patients receiving palliative sedation. 
. A modified version of a questionnaire describing experiences of family members with palliative sedation was administered during palliative sedation and one to four months after the patient died. Descriptive statistics were used to describe the results of the questionnaire, and appropriate statistical analyses were conducted for comparisons over time.
. Experiences of family members and time.
. Most relatives were satisfied with the sedation and staff support. Palliative sedation was experienced as an ethical way to relieve suffering. However, one-third felt that it shortened the patient's life. An explanation of the treatment was given less than half of the time and was usually given on the same day treatment was started. This explanation was given by physicians and nurses. Many felt that they were not ready for changes in the patient's condition and wanted increased opportunities to discuss the treatment with oncology care providers. No statistically significant differences in experiences were found over time. 
. Relatives' experiences of palliative sedation were generally positive and stable over time. Important experiences included timing of the initiation of sedation, timing and quality of explanations, and communication.
. Nurses should attempt to initiate discussions of the possible role of sedation in the event of refractory symptoms and follow through with continued discussions. The management of refractory symptoms at the end of life, the role of sedation, and communication skills associated with decision making related to palliative sedation should be a part of the core nursing curriculum. Nursing administrators in areas that use palliative sedation should enforce good nursing clinical practice as recommended by international practice guidelines, such as those of the European Association for Palliative Care.

The effect of prior healthcare employment on the wages of registered nurses.

PubMed

Yoo, Byung-Kwang; Kim, Minchul; Lin, Tzu-Chun; Sasaki, Tomoko; Ward, Debbie; Spetz, Joanne

2016-08-19

The proportion of registered nurses (RNs) with employment in health-related positions before their initial RN education has increased in the past two decades. Previous research found that prior health-related employment is positively associated with RN workforce supply, potentially due to the wage differences based on different career paths. This study's objective is to test the hypotheses that prior health-related employment is associated with differences in starting wages and with different rates of wage growth for experience as an RN. We conducted a cross-sectional analysis using the 2008 National Sample Survey of Registered Nurses (NSSRN) linked with county-level variables from the Area Health Resource File. We estimated a Heckman model where the second-stage equation's outcome variable was the logarithm of the RN hourly wage, accounting for the self-selection of working or not working as an RN (i.e., the first-stage equation's outcome variable). Key covariates included interaction terms between years of experience, experience squared, and six categories of prior health-related employment (manager, LPN/LVN, allied health, nursing aide, clerk, and all other healthcare positions). Additional covariates included demographics, weekly working hours, marital status, highest nursing degree, and county-level variables (e.g., unemployment rate). We estimated the marginal effect of experience on wage for each type of prior health-related employment, conducting separate analyses for RNs whose initial education was a Bachelor of Science in Nursing (BSN) (unweighted N = 10,345/weighted N = 945,429), RNs whose initial education was an Associate degree (unweighted N = 13,791/weighted N = 1,296,809), and total population combining the former groups (unweighted N = 24,136/weighted N = 2,242,238). Prior health-related employment was associated with higher wages, with the strongest wage differences among BSN-educated RNs. Among BSN-educated RNs, previous employment as a health care manager, LPN/LVN, or nursing aide produced statistically higher starting wages ($1.72-$3.86 per hour; $3400-$7700 per year; p = 0.006-0.08). However, experience-based wage growth was lower for BSN-educated RNs previously employed as allied health workers, LPN/LVNs, or nursing aides. Among Associate degree-educated RNs, wage difference was not observed except for higher initial wage for RNs with previous employment as LPN/LVNs. Prior employment in health-related positions was associated with both starting salary and experience-based wage growth among BSN-educated RNs. The higher wage return for those with a BSN may motivate non-RN healthcare workers to seek a BSN in their transition to RN jobs, which could help advancement toward the 80 % BSN workforce recommended by the U.S. Institute of Medicine.

Use of solar distillation for olive mill wastewater drying and recovery of polyphenolic compounds.

PubMed

Sklavos, Sotirios; Gatidou, Georgia; Stasinakis, Athanasios S; Haralambopoulos, Dias

2015-10-01

Olive mill wastewater (OMW) is characterized by its high organic load and the presence of phenolic compounds. For first time, a solar distillator was used to investigate the simultaneous solar drying of OMW and the recovery of phenolic compounds with antioxidant properties in the distillate. Two experiments were conducted and the role of thermal insulation on the performance of the distiller was studied. The use of insulation resulted to higher temperatures in the distillator (up to 84.3 °C and 78.5 °C at the air and sludge, respectively), shorter period for OMW dewatering (14 days), while it increased the performance of distillator by 26.1%. Chemical characterization of the distillate showed that pH and COD concentration gradually decreased during the experiments, whereas an opposite trend was noticed for conductivity and total phenols concentration. Almost 4% of the total phenols found initially in OMW were transferred to the distillate when an insulated solar distillator was used. Gas chromatographic analysis of collected distillates confirmed the presence of tyrosol in all samples; whereas hydroxytyrosol was found only in fresh collected distillate samples. Further experiments should be conducted to optimize the process and quantify the concentrations of recovered phenolic compounds. Copyright © 2015 Elsevier Ltd. All rights reserved.

Challenges in conducting qualitative research in health: A conceptual paper.

PubMed

Khankeh, Hamidreza; Ranjbar, Maryam; Khorasani-Zavareh, Davoud; Zargham-Boroujeni, Ali; Johansson, Eva

2015-01-01

Qualitative research focuses on social world and provides the tools to study health phenomena from the perspective of those experiencing them. Identifying the problem, forming the question, and selecting an appropriate methodology and design are some of the initial challenges that researchers encounter in the early stages of any research project. These problems are particularly common for novices. This article describes the practical challenges of using qualitative inquiry in the field of health and the challenges of performing an interpretive research based on professional experience as a qualitative researcher and on available literature. One of the main topics discussed is the nature of qualitative research, its inherent challenges, and how to overcome them. Some of those highlighted here include: identification of the research problem, formation of the research question/aim, and selecting an appropriate methodology and research design, which are the main concerns of qualitative researchers and need to be handled properly. Insights from real-life experiences in conducting qualitative research in health reveal these issues. The paper provides personal comments on the experiences of a researcher in conducting pure qualitative research in the field of health. It offers insights into the practical difficulties encountered when performing qualitative studies and offers solutions and alternatives applied by these authors, which may be of use to others.

Making a Splash in Microgravity with Teachers

NASA Astrophysics Data System (ADS)

Wissel, Stephanie; Zwicker, Andrew; Merali, Aliya; Litman, Katherine; Williams, Bruce; West, David; Grom, Jonathan; Muneer, Haazim; Bandeh, Bocary; Courtney, Mary; Quinn, Maureen

2011-10-01

PPPL recently entered into a three-year Space Act Agreement with NASA to create a new K-12 research experience for teachers where they y an experiment on the ``Weightless Wonder''. One team comprises six teachers from the Trenton Public School District, ranging in focus from K-2 special education to 9-12 teachers, who were selected for their enthusiasm for science and desire to incorporate a research project into their curriculum. They conducted an experiment that observed the splashes resulting from the water entry of both hydrophobic and hydrophilic steel balls where the change in gravity affects the resulting splash dynamics. The program also requires concurrent curriculum development incorporating the project into their classes. The teachers and students from the same district will analyze the data and use inform the experiment to be own in 2012. We report on the results of the experiment, the subsequent implementation of the curricula, and the initial impact on the students.

The Pulsed High Density Experiment (PHDX) Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Slough, John P.; Andreason, Samuel

The purpose of this paper is to present the conclusions that can be drawn from the Field Reversed Configuration (FRC) formation experiments conducted on the Pulsed High Density experiment (PHD) at the University of Washington. The experiment is ongoing. The experimental goal for this first stage of PHD was to generate a stable, high flux (>10 mWb), high energy (>10 KJ) target FRC. Such results would be adequate as a starting point for several later experiments. This work focuses on experimental implementation and the results of the first four month run. Difficulties were encountered due to the initial on-axis plasmamore » ionization source. Flux trapping with this ionization source acting alone was insufficient to accomplish experimental objectives. Additional ionization methods were utilized to overcome this difficulty. A more ideal plasma source layout is suggested and will be explored during a forthcoming work.« less

Parametric analyses of planned flowing uranium hexafluoride critical experiments

NASA Technical Reports Server (NTRS)

Rodgers, R. J.; Latham, T. S.

1976-01-01

Analytical investigations were conducted to determine preliminary design and operating characteristics of flowing uranium hexafluoride (UF6) gaseous nuclear reactor experiments in which a hybrid core configuration comprised of UF6 gas and a region of solid fuel will be employed. The investigations are part of a planned program to perform a series of experiments of increasing performance, culminating in an approximately 5 MW fissioning uranium plasma experiment. A preliminary design is described for an argon buffer gas confined, UF6 flow loop system for future use in flowing critical experiments. Initial calculations to estimate the operating characteristics of the gaseous fissioning UF6 in a confined flow test at a pressure of 4 atm, indicate temperature increases of approximately 100 and 1000 K in the UF6 may be obtained for total test power levels of 100 kW and 1 MW for test times of 320 and 32 sec, respectively.

Light Microscopy Module: On-Orbit Microscope Planned for the Fluids Integrated Rack on the International Space Station

NASA Technical Reports Server (NTRS)

Motil, Susan M.

2002-01-01

The Light Microscopy Module (LMM) is planned as a remotely controllable, automated, on-orbit facility, allowing flexible scheduling and control of physical science and biological science experiments within the Fluids Integrated Rack (FIR) on the International Space Station. Initially four fluid physics experiments in the FIR will use the LMM the Constrained Vapor Bubble, the Physics of Hard Spheres Experiment-2, Physics of Colloids in Space-2, and Low Volume Fraction Entropically Driven Colloidal Assembly. The first experiment will investigate heat conductance in microgravity as a function of liquid volume and heat flow rate to determine, in detail, the transport process characteristics in a curved liquid film. The other three experiments will investigate various complementary aspects of the nucleation, growth, structure, and properties of colloidal crystals in microgravity and the effects of micromanipulation upon their properties.

Multiscale Analysis of Nanocomposites and Their Use in Structural Level Applications

NASA Astrophysics Data System (ADS)

Hasan, Zeaid

This research focuses on the benefits of using nanocomposites in aerospace structural components to prevent or delay the onset of unique composite failure modes, such as delamination. Analytical, numerical, and experimental analyses were conducted to provide a comprehensive understanding of how carbon nanotubes (CNTs) can provide additional structural integrity when they are used in specific hot spots within a structure. A multiscale approach was implemented to determine the mechanical and thermal properties of the nanocomposites, which were used in detailed finite element models (FEMs) to analyze interlaminar failures in T and Hat section stringers. The delamination that first occurs between the tow filler and the bondline between the stringer and skin was of particular interest. Both locations are considered to be hot spots in such structural components, and failures tend to initiate from these areas. In this research, nanocomposite use was investigated as an alternative to traditional methods of suppressing delamination. The stringer was analyzed under different loading conditions and assuming different structural defects. Initial damage, defined as the first drop in the load displacement curve was considered to be a useful variable to compare the different behaviors in this study and was detected via the virtual crack closure technique (VCCT) implemented in the FE analysis. Experiments were conducted to test T section skin/stringer specimens under pull-off loading, replicating those used in composite panels as stiffeners. Two types of designs were considered: one using pure epoxy to fill the tow region and another that used nanocomposite with 5 wt. % CNTs. The response variable in the tests was the initial damage. Detailed analyses were conducted using FEMs to correlate with the experimental data. The correlation between both the experiment and model was satisfactory. Finally, the effects of thermal cure and temperature variation on nanocomposite structure behavior were studied, and both variables were determined to influence the nanocomposite structure performance.

Expecting the unexpected: A mixed methods study of violence to EMS responders in an urban fire department.

PubMed

Taylor, Jennifer A; Barnes, Brittany; Davis, Andrea L; Wright, Jasmine; Widman, Shannon; LeVasseur, Michael

2016-02-01

Struck by injuries experienced by females were observed to be higher compared to males in an urban fire department. The disparity was investigated while gaining a grounded understanding of EMS responder experiences from patient-initiated violence. A convergent parallel mixed methods design was employed. Using a linked injury dataset, patient-initiated violence estimates were calculated comparing genders. Semi-structured interviews and a focus group were conducted with injured EMS responders. Paramedics had significantly higher odds for patient-initiated violence injuries than firefighters (OR 14.4, 95%CI: 9.2-22.2, P < 0.001). Females reported increased odds of patient-initiated violence injuries compared to males (OR = 6.25, 95%CI 3.8-10.2), but this relationship was entirely mediated through occupation (AOR = 1.64, 95%CI 0.94-2.85). Qualitative data illuminated the impact of patient-initiated violence and highlighted important organizational opportunities for intervention. Mixed methods greatly enhanced the assessment of EMS responder patient-initiated violence prevention. © 2016 The Authors. American Journal of Industrial Medicine Published by Wiley Periodicals, Inc.

Local understandings of conservation in southeastern Mexico and their implications for community-based conservation as an alternative paradigm.

PubMed

Reyes-Garcia, Victoria; Ruiz-Mallen, Isabel; Porter-Bolland, Luciana; Garcia-Frapolli, Eduardo; Ellis, Edward A; Mendez, Maria-Elena; Pritchard, Diana J; Sanchez-Gonzalez, María-Consuelo

2013-08-01

Since the 1990s national and international programs have aimed to legitimize local conservation initiatives that might provide an alternative to the formal systems of state-managed or otherwise externally driven protected areas. We used discourse analysis (130 semistructured interviews with key informants) and descriptive statistics (679 surveys) to compare local perceptions of and experiences with state-driven versus community-driven conservation initiatives. We conducted our research in 6 communities in southeastern Mexico. Formalization of local conservation initiatives did not seem to be based on local knowledge and practices. Although interviewees thought community-based initiatives generated less conflict than state-managed conservation initiatives, the community-based initiatives conformed to the biodiversity conservation paradigm that emphasizes restricted use of and access to resources. This restrictive approach to community-based conservation in Mexico, promoted through state and international conservation organizations, increased the area of protected land and had local support but was not built on locally relevant and multifunctional landscapes, a model that community-based conservation is assumed to advance. © 2013 Society for Conservation Biology.

Cyclodextrin-enhanced solubilization and removal of residual-phase chlorinated solvents from porous media

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boving, T.B.; Wang, X.; Brusseau, M.L.

1999-03-01

The development of improved methods for remediation of contaminated aquifers has emerged as a significant environmental priority. One technology that appears to have considerable promise involves the use of solubilization agents such as surfactants and cosolvents for enhancing the removal of residual phase immiscible liquids. The authors examined the use of cyclodextrin, a glucose-based molecule, for solubilizing and removing residual-phase immiscible liquid from porous media. Batch experiments were conducted to measure the degree of trichloroethene (TCE) and tetrachloroethene (PCE) solubilization induced by hydroxypropyl-{beta}-cyclodextrin (HPCD) and methyl-{beta}-cyclodextrin (MCD). These studies revealed that the solubilities of TCE and PCE were enhanced bymore » up to 9.5 and 36.0 times, respectively. Column experiments were conducted to compare water and cyclodextrin-enhanced flushing of Borden sand containing residual saturations of TCE and PCE. The results indicate that solubilization and mass removal were enhanced substantially with the use of cyclodextrins. The effluent concentrations during the steady-state phase of the HPCD and MCD flushing experiments were close to the apparent solubilities measured with the batch experiments, indicating equilibrium concentrations were maintained during the initial phase of cyclodextrin flushing. Mobilization was observed for only the TCE-MCD and PCE-5%MCD experiments.« less

Plan of Action: JASPER Management Prestart Review (Surrogate Material Experiment)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cooper, W E

2000-12-05

The Lawrence Livermore National Laboratory (LLNL) Joint Actinide Shock Physics Experimental Research (JASPER) Facility is being developed at the Nevada Test Site (NTS) to conduct shock physics experiments on special nuclear material and other actinide materials. JASPER will use a two-stage, light-gas gun to shoot projectiles at actinide targets. Projectile velocities will range from 1 to 8 km/s, inducing pressures in the target material up to 6 Mbar. The JASPER gas gun has been designed to match the critical dimensions of the two-stage, light-gas gun in Building 341 of LLNL. The goal in copying the LLNL gun design is tomore » take advantage of the extensive ballistics database that exists and to minimize the effort spent on gun characterization in the initial facility start-up. A siting study conducted by an inter-Laboratory team identified Able Site in Area 27 of the NTS as the best location for the JASPER gas gun. Able Site consists of three major buildings that had previously been used to support the nuclear test program. In April 1999, Able Site was decommissioned as a Nuclear Explosive Assembly Facility and turned back to the DOE for other uses. Construction and facility modifications at Able Site to support the JASPER project started in April 1999 and were completed in September 1999. The gas gun and the secondary confinement chamber (SCC) were installed in early 2000. During the year, all facility and operational systems were brought on line. Initial system integration demonstrations were completed in September 2000. The facility is anticipated to be operational by August 2001, and the expected life cycle for the facility is 10 years. LLNL Nevada Experiments and Operations (N) Program has established a Management Prestart Review (MPR) team to determine the readiness of the JASPER personnel and facilities to initiate surrogate-material experiments. The review coincides with the completion of authorization-basis documents and physical subsystems, which have undergone appropriate formal engineering design reviews. This MPR will affirm the quality of those reviews, their findings/resolutions, and will look most closely at systems integration requirements and demonstrations that will have undergone technical acceptance reviews before the formal MPR action. Closure of MPR findings will finalize requirements for a DOE/NV Real Estate/Operations Permit (REOP) for surrogate-material experiments. Upon completion of that experiment series and the establishment of capabilities for incorporating SNM into future experiments, the team will convene again as part of the process of authorizing those activities.« less

Plan of Action: JASPER Management Prestart Review (Surrogate Material Experiments)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cooper, W.E.

2000-09-29

The Lawrence Livermore National Laboratory (LLNL) Joint Actinide Shock Physics Experimental Research (JASPER) Facility is being developed at the Nevada Test Site (NTS) to conduct shock physics experiments on special nuclear material and other actinide materials. JASPER will use a two-stage, light-gas gun to shoot projectiles at actinide targets. Projectile velocities will range from 1 to 8 km/s, inducing pressures in the target material up to 6 Mbar. The JASPER gas gun has been designed to match the critical dimensions of the two-stage, light-gas gun in Building 341 of LLNL. The goal in copying the LLNL gun design is tomore » take advantage of the extensive ballistics database that exists and to minimize the effort spent on gun characterization in the initial facility start-up. A siting study conducted by an inter-Laboratory team identified Able Site in Area 27 of the NTS as the best location for the JASPER gas gun. Able Site consists of three major buildings that had previously been used to support the nuclear test program. In April 1999, Able Site was decommissioned as a Nuclear Explosive Assembly Facility and turned back to the DOE for other uses. Construction and facility modifications at Able Site to support the JASPER project started in April 1999 and were completed in September 1999. The gas gun and the secondary confinement chamber (SCC) were installed in early 2000. During the year, all facility and operational systems were brought on line. Initial system integration demonstrations were completed in September 2000. The facility is anticipated to be operational by August 2001, and the expected life cycle for the facility is 10 years. LLNL Nevada Experiments and Operations (N) Program has established a Management Prestart Review (MPR) team to determine the readiness of the JASPER personnel and facilities to initiate surrogate-material experiments. The review coincides with the completion of authorization-basis documents and physical subsystems, which have undergone appropriate formal engineering design reviews. This MPR will affirm the quality of those reviews, their findings/resolutions, and will look most closely at systems integration requirements and demonstrations that will have undergone technical acceptance reviews before the formal MPR action. Closure of MPR findings will finalize requirements for a DOE/NV Real Estate/Operations Permit (REOP) for surrogate-material experiments. Upon completion of that experiment series and the establishment of capabilities for incorporating SNM into future experiments, the team will convene again as part of the process of authorizing those activities.« less

Using Controlled Landslide Initiation Experiments to Test Limit-Equilibrium Analyses of Slope Stability

NASA Astrophysics Data System (ADS)

Reid, M. E.; Iverson, R. M.; Brien, D. L.; Iverson, N. R.; Lahusen, R. G.; Logan, M.

2004-12-01

Most studies of landslide initiation employ limit equilibrium analyses of slope stability. Owing to a lack of detailed data, however, few studies have tested limit-equilibrium predictions against physical measurements of slope failure. We have conducted a series of field-scale, highly controlled landslide initiation experiments at the USGS debris-flow flume in Oregon; these experiments provide exceptional data to test limit equilibrium methods. In each of seven experiments, we attempted to induce failure in a 0.65m thick, 2m wide, 6m3 prism of loamy sand placed behind a retaining wall in the 31° sloping flume. We systematically investigated triggering of sliding by groundwater injection, by prolonged moderate-intensity sprinkling, and by bursts of high intensity sprinkling. We also used vibratory compaction to control soil porosity and thereby investigate differences in failure behavior of dense and loose soils. About 50 sensors were monitored at 20 Hz during the experiments, including nests of tiltmeters buried at 7 cm spacing to define subsurface failure geometry, and nests of tensiometers and pore-pressure sensors to define evolving pore-pressure fields. In addition, we performed ancillary laboratory tests to measure soil porosity, shear strength, hydraulic conductivity, and compressibility. In loose soils (porosity of 0.52 to 0.55), abrupt failure typically occurred along the flume bed after substantial soil deformation. In denser soils (porosity of 0.41 to 0.44), gradual failure occurred within the soil prism. All failure surfaces had a maximum length to depth ratio of about 7. In even denser soil (porosity of 0.39), we could not induce failure by sprinkling. The internal friction angle of the soils varied from 28° to 40° with decreasing porosity. We analyzed stability at failure, given the observed pore-pressure conditions just prior to large movement, using a 1-D infinite-slope method and a more complete 2-D Janbu method. Each method provides a static Factor of Safety (FS), and in theory failure occurs when FS ≤ 1. Using the 1-D analysis, all experiments having failure had FS well below 1 (typically 0.5-0.8). Using the 2-D analysis for these same conditions, FS was less than but closer to 1 (typically 0.8-0.9). For the experiment with no failure, the 2-D FS was, reassuringly, > 1. These results indicate that the 2-D Janbu analysis is more accurate than the 1-D infinite-slope method for computing limit-equilibrium slope stability in shallow slides with limited areal extent.

Effect of cryopreservation methods and precryopreservation storage on bottlenose dolphin (Tursiops truncatus) spermatozoa.

PubMed

Robeck, T R; O'Brien, J K

2004-05-01

Research was conducted to develop an effective method for cryopreserving bottlenose dolphin (Tursiops truncatus) semen processed immediately after collection or after 24-h liquid storage. In each of two experiments, four ejaculates were collected from three males. In experiment 1, three cryopreservation methods (CM1, CM2, and CM3), two straw sizes (0.25 and 0.5 ml), and three thawing rates (slow, medium, and fast) were evaluated. Evaluations were conducted at collection, prefreeze, and 0-, 3-, and 6-h postthaw. A sperm motility index (SMI; total motility [TM] x % progressive motility [PPM] x kinetic rating [KR, scale of 0-5]) was calculated and expressed as a percentage MI of the initial ejaculate. For all ejaculates, initial TM and PPM were greater than 85%, and KR was five. At 0-h postthaw, differences in SMI among cryopreservation methods and thaw rates were observed (P < 0.05), but no effect of straw size was observed. In experiment 2, ejaculates were divided into four aliquots for dilution (1:1) and storage at 4 degrees C with a skim milk- glucose or a N-tris(hydroxymethyl)methyl-2-aminoethane sulfonic acid (TES)-TRIS egg yolk solution and at 21 degrees C with a Hepes-Tyrode balanced salt solution (containing bovine albumin and HEPES) (TALP) medium or no dilution. After 24 h, samples were frozen and thawed (CM3, 0.5-ml straws, fast thawing rate) at 20 x 10(6) spermatozoa ml(-1) (low concentration) or at 100 x 10(6) spermatozoa ml(-1) (standard concentration). The SMI at 0-h postthaw was higher for samples stored at 4 degrees C than for samples stored at 21 degrees C (P < 0.001), and at 6-h postthaw, the SMI was higher for samples frozen at the standard concentration than for samples frozen at the low concentration (P < 0.05). For both experiments, acrosome integrity was similar across treatments. In summary, a semen cryopreservation protocol applied to fresh or liquid-stored semen maintained high levels of initial ejaculate sperm characteristics.

Role of the visual experience-dependent nascent proteome in neuronal plasticity

PubMed Central

Liu, Han-Hsuan; McClatchy, Daniel B; Schiapparelli, Lucio; Shen, Wanhua; Yates, John R

2018-01-01

Experience-dependent synaptic plasticity refines brain circuits during development. To identify novel protein synthesis-dependent mechanisms contributing to experience-dependent plasticity, we conducted a quantitative proteomic screen of the nascent proteome in response to visual experience in Xenopus optic tectum using bio-orthogonal metabolic labeling (BONCAT). We identified 83 differentially synthesized candidate plasticity proteins (CPPs). The CPPs form strongly interconnected networks and are annotated to a variety of biological functions, including RNA splicing, protein translation, and chromatin remodeling. Functional analysis of select CPPs revealed the requirement for eukaryotic initiation factor three subunit A (eIF3A), fused in sarcoma (FUS), and ribosomal protein s17 (RPS17) in experience-dependent structural plasticity in tectal neurons and behavioral plasticity in tadpoles. These results demonstrate that the nascent proteome is dynamic in response to visual experience and that de novo synthesis of machinery that regulates RNA splicing and protein translation is required for experience-dependent plasticity. PMID:29412139

Dryout and Rewetting in the Pool Boiling Experiment Flown on STS-72 (PBE-2 B) and STS-77 (PBE-2 A)

NASA Technical Reports Server (NTRS)

Merte, Herman, Jr.; Lee, Ho Sung; Keller, Robert B.

1998-01-01

Experiments were conducted in the microgravity of space in which a pool of liquid (R-113), initially at a precisely defined pressure and temperature, is subjected to a step imposed heat flux from a semi-transparent thin-film heater forming part of one wall of the container such that boiling is initiated and maintained for a defined period of time at a constant pressure level. A total of nine tests were conducted at three levels of heat flux and three levels of subcooling in each of the two space experiments in a GAS canister on the STS-77, -72, respectively. Three (3) modes of propagation of boiling across the heater surface and subsequent vapor bubble growths were observed, in addition to the two (2) modes observed in the previous microgravity pool boiling space flights on STS-47, -57, and -60. Of particular interest were the extremely dynamic or "explosive" growths, which were determined to be the consequence of the large increase in the liquid-vapor interface area associated with the appearance of a corrugated or rough interface. Predictions of circumstances for its onset have been carried out. Assumptions were necessary regarding the character of disturbances necessary for the instabilities to grow. Also, a new vapor bubble phenomena was observed in which small vapor bubbles migrated toward a larger bubble, eventually coalescing with this larger bubble. The heat transfer was enhanced approximately 30% as a result of these migrating bubbles, which is believed to be a vapor bubble manifestation of Marangoni convection and/or molecular momentum effects, sometimes referred to as vapor recoil. The circumstances of heat flux and liquid subcooling necessary to produce heater surface dryout for an initially stagnant liquid subjected to an imposed heat flux have been more closely identified.

Materials experiment carrier concepts definition study. Volume 1: Executive summary, part 2

NASA Technical Reports Server (NTRS)

1981-01-01

The materials experiment carrier (MEC) is an optimized carrier for near term and advanced materials processing in space (MPS) research and commercial payloads. When coupled with the space platform (SP), the MEC can provide the extended duration, high power and low acceleration environment the MPS payload typically requires. The lowest cost, technically reasonable first step MEC that meets the MPS program missions objectives with minimum programmatic risks is defined. The effectiveness of the initial MEC/space platform idea for accommodating high priority, multidiscipline, R&D and commercial MPS payloads, and conducting MPS payload oprations at affordable funding and acceptable productivity levels is demonstrated.

Ambassador Award Nominations Sought: Celebrate Work in Outreach and Societal Impact

NASA Astrophysics Data System (ADS)

Finn, Carol

2014-03-01

A seismologist who starts giving talks at her local library and city's chamber of commerce about her work gradually becomes a go-to resource for her entire community on natural hazards preparation and safety. A professor at a community college creates an ambitious teaching initiative that supports hands-on research experiences for students who have never before been given the chance to conduct experiments. An Arctic ecologist assembles and leads a state-wide group of colleagues whose regular communication with legislators helps inform policy decisions and long-term regional planning. A heliophysicist steps up and coordinates new space weather research collaborations whose participants cross continents and disciplines.

Ecology and thermal inactivation of microbes in and on interplanetary space vehicle components

NASA Technical Reports Server (NTRS)

Reyes, A. L.

1975-01-01

A series of experiments was conducted to determine the dry heat resistance of microorganisms in soil obtained from Denver Colorado, Pasadena California, Kennedy Space Center Florida, and Cincinnati Ohio. The results of the KSC terminal sterilization cycle experiment are given in graphs. The average number of viable organisms per m1 was calculated for 18 replicate soil samples for each sample area and points plotted equivalent to 30 hr exposure at 112 C. The result showed a reduction of 3 logs from the initial population for both KSC and Cincinnati soil samples. Results from other areas are given in graphs.

Bacterial degradation of polychlorinted biphenyls in sludge from an industrial sewer lagoon

NASA Technical Reports Server (NTRS)

Kim, W. S.; Takacs, A. M.; Kuivinen, D. E.

1983-01-01

A laboratory experiment was conducted to determine if polychlorinated biphenyls (PCB's) found in an industrial sewer sludge can be effectively degraded by mutant bacteria. The aerated sludge was inoculated daily with mutant bacteria in order to augment the existing bacteria with bacteria that were considered to be capable of degrading PCB's. The pH, nitrogen, and phosphorus levels were monitored daily to maintain an optimum growing medium for the bacteria. A gas chromatographic method was used to determine the PCB concentrations of the sludge initially and also throughout the experiment. Results and discussion of the bacterial treatment of polychlorinated biphenyls are presented.

Grief and bereavement of Israeli dog owners: exploring short-term phases pre- and post-euthanization.

PubMed

Tzivian, Lilian; Friger, Michael; Kushnir, Talma

2014-01-01

Several studies have investigated the grief that owners experience after they euthanized their pets. However, research has not explored the cognitive and emotional processes those dog owners experience. The authors chose an exploratory approach and conducted a content analysis of 29 semistructured interviews of owners in the 2-week period after the death of their dogs. They found 5 main phases in the initial parting process: the decision to euthanize; anticipation and mental preparation; burial; mourning; and thinking about a new pet. All participants experienced these 5 common behavioral and emotional phases. There were only small individual differences among owners' reactions.

Definition of technology development missions for early Space Station satellite servicing. Volume 2: Technical

NASA Technical Reports Server (NTRS)

Cable, D. A.; Diewald, C. A.; Hills, T. C.; Parmentier, T. J.; Spencer, R. A.; Stone, G. E.

1984-01-01

Volume 2 contains the Technical Report of the approach and results of the Phase 2 study. The phase 2 servicing study was initiated in June 1983, and is being reported in this document. The scope of the contract was to: (1) define in detail five selected technology development missions (TDM); (2) conduct a design requirement analysis to refine definitions of satellite servicing requirements at the space station; and (3) develop a technology plan that would identify and schedule prerequisite precursor technology development, associated. STS flight experiments and space station experiments needed to provide onorbit validation of the evolving technology.

Comprehensive Nuclear-Test-Ban Treaty: Issues and Arguments

DTIC Science & Technology

2008-02-28

is the point at which this chain reaction occurs; a “ critical mass ” is the amount of fissile material just enough to support criticality . The...amount of material for a critical mass depends on many factors, such as shape, density, impurities that absorb neutrons, and use of material to reflect...the years. Hydronuclear experiments were conducted during the 1958-1961 nuclear test moratorium. They initially used less than a critical mass of

Hansel and Gretel Walk in the Forest, Landowners Walk in the Woods: A Qualitative Examination of the Language Used by Family Forest Owners

Treesearch

Kyle Andrejczyk; Brett J. Butler; Mary L. Tyrrell; Judith Langer

2016-01-01

In 2007, a series of focus groups with family forest owners was conducted as part of a social marketing initiative with the aim of increasing conservation activities on private forestlands. Participants in the study were asked how they perceive and experience their land and how they understand certain terminology used by forestry professionals. Results show that family...

Data documentation for the bare soil experiment at the University of Arkansas

NASA Technical Reports Server (NTRS)

Waite, W. P.; Scott, H. D. (Principal Investigator); Hancock, G. D.

1980-01-01

The reflectivities of several controlled moisture test plots were investigated. These test plots were of a similar soil texture which was clay loam and were prepared to give a desired initial soil moisture and density profile. Measurements were conducted on the plots as the soil water redistributed for both long term and diurnal cycles. These measurements included reflectivity, gravimetric and volumetric soil moisture, soil moisture potential, and soil temperature.

Post-Shock Sampling of Shock-Heated Hydrocarbon Fuels

DTIC Science & Technology

2016-07-07

on the ability to measure key hydrocarbon fragments (e.g. ethylene , methane, and acetylene) over a wide range of temperatures and pressures. The...series of experiments was conducted to validate the sampling system results and explore the thermal decomposition of ethylene and methane. Initially, a...1% ethylene /0.1% methane/balance argon fuel mixture was shock-heated to ~960 K – a temperature low enough that no reaction would occur. GC analysis

Radiation Effects on an Active Ytterbium doped Fiber Laser

DTIC Science & Technology

laser. While the gain medium of the laser was irradiated , the power was measured in-situ and the spectrum was recorded intermittently. The results...with a lower initial power. Power recovery experiments were conducted post- irradiation with the fiber laser off and actively lasing. Passively, the...total power recovery of 12.6 and 4.4 for YDF1 and YDF2 respectively. The active recovery rate declined as the number of days following irradiation

Experimental evaluation of rigor mortis. VIII. Estimation of time since death by repeated measurements of the intensity of rigor mortis on rats.

PubMed

Krompecher, T

1994-10-21

The development of the intensity of rigor mortis was monitored in nine groups of rats. The measurements were initiated after 2, 4, 5, 6, 8, 12, 15, 24, and 48 h post mortem (p.m.) and lasted 5-9 h, which ideally should correspond to the usual procedure after the discovery of a corpse. The experiments were carried out at an ambient temperature of 24 degrees C. Measurements initiated early after death resulted in curves with a rising portion, a plateau, and a descending slope. Delaying the initial measurement translated into shorter rising portions, and curves initiated 8 h p.m. or later are comprised of a plateau and/or a downward slope only. Three different phases were observed suggesting simple rules that can help estimate the time since death: (1) if an increase in intensity was found, the initial measurements were conducted not later than 5 h p.m.; (2) if only a decrease in intensity was observed, the initial measurements were conducted not earlier than 7 h p.m.; and (3) at 24 h p.m., the resolution is complete, and no further changes in intensity should occur. Our results clearly demonstrate that repeated measurements of the intensity of rigor mortis allow a more accurate estimation of the time since death of the experimental animals than the single measurement method used earlier. A critical review of the literature on the estimation of time since death on the basis of objective measurements of the intensity of rigor mortis is also presented.

Views and Experiences of Malaysian Family Medicine Trainees of Female Sexual Dysfunction.

PubMed

Lai, Pauline Siew Mei; Tan, Sing Yee; Liew, Su May

2016-11-01

Sociocultural factors have been shown to be important influencers of sexual health and sexuality. Hence, the aim of our study was to explore the views and experiences of family medicine trainees regarding female sexual dysfunction (FSD) with a focus on the barriers and facilitators towards the initiation of conversation on this topic. A qualitative study design involving semi-structured focus group discussions (FGDs) was conducted with 19 family medicine trainees in Malaysia. The conceptual framework used was based on the Theory of Planned Behavior. Thematic approach was used to analyze the data. Participants perceived FSD as being uncommon and unimportant. According to our participants, patients often presented with indirect complaints, and doctors were not proactive in asking about FSD. Three main barriers were identified: doctor factors, perceived patient factors, and system factors. Lack of confidence, knowledge, experience, time, and embarrassment were the key barriers identified at the doctors' level. Lack of awareness, among patients regarding FSD, and local cultural and religious norms were the perceived patient barriers. System barriers were lack of time and privacy. Various facilitators, such as continuous medical education and public forums, were suggested as means to encourage family medicine trainees to initiate discussion on sexual matters during consultations. In conclusion, family medicine trainees found it difficult to initiate conversation on FSD with patients. Interventions to encourage conversation on FSD should target this and other identified barriers.

"Do-It-Ourselves Science": Case Studies of Volunteer-Initiated Citizen Science Involvement

NASA Astrophysics Data System (ADS)

Raddick, Jordan; Bracey, G.; Gay, P. L.

2009-05-01

Galaxy Zoo is a citizen science website in which members of the public volunteer to classify galaxies, thereby helping astronomers conduct publishable research into galaxy morphologies and environments. Although the site was originally created to answer a few specific questions, some members of the community - both scientists and volunteers - have spontaneously developed an interest in a wider variety of questions. Volunteers have pursued answers to these questions with guidance from professional astronomers; in completing these projects, volunteers have independently used some of the same data viewing and analysis tools that professional astronomers use, and have even developed their own online tools. They have created their own research questions and their own plans for data analysis, and are planning to write scientific papers with the results to be submitted to peer-reviewed scientific journals. Volunteers have identified a number of such projects. These volunteer-initiated projects have extended the scientific reach of Galaxy Zoo, while also giving volunteers first-hand experience with the process of science. We are interested in the process by which volunteers become interested in volunteer-initiated projects, and what tasks they participate in, both initially and as their involvement increases. What motivates a volunteer to become involved in a volunteer-initiated project? How does his or her motivation change with further involvement? We are conducting a program of qualitative education research into these questions, using as data sources the posts that volunteers have made to the Galaxy Zoo forum and transcripts of interviews with volunteers.

Isothermal thermogravimetric data acquisition analysis system

NASA Technical Reports Server (NTRS)

Cooper, Kenneth, Jr.

1991-01-01

The description of an Isothermal Thermogravimetric Analysis (TGA) Data Acquisition System is presented. The system consists of software and hardware to perform a wide variety of TGA experiments. The software is written in ANSI C using Borland's Turbo C++. The hardware consists of a 486/25 MHz machine with a Capital Equipment Corp. IEEE488 interface card. The interface is to a Hewlett Packard 3497A data acquisition system using two analog input cards and a digital actuator card. The system provides for 16 TGA rigs with weight and temperature measurements from each rig. Data collection is conducted in three phases. Acquisition is done at a rapid rate during initial startup, at a slower rate during extended data collection periods, and finally at a fast rate during shutdown. Parameters controlling the rate and duration of each phase are user programmable. Furnace control (raising and lowering) is also programmable. Provision is made for automatic restart in the event of power failure or other abnormal terminations. Initial trial runs were conducted to show system stability.

Advanced Space Suit Insulation Feasibility Study

NASA Technical Reports Server (NTRS)

Trevino, Luis A.; Orndoff, Evelyne S.

2000-01-01

For planetary applications, the space suit insulation has unique requirements because it must perform in a dynamic mode to protect humans in the harsh dust, pressure and temperature environments. Since the presence of a gaseous planetary atmosphere adds significant thermal conductance to the suit insulation, the current multi-layer flexible insulation designed for vacuum applications is not suitable in reduced pressure planetary environments such as that of Mars. Therefore a feasibility study has been conducted at NASA to identify the most promising insulation concepts that can be developed to provide an acceptable suit insulation. Insulation concepts surveyed include foams, microspheres, microfibers, and vacuum jackets. The feasibility study includes a literature survey of potential concepts, an evaluation of test results for initial insulation concepts, and a development philosophy to be pursued as a result of the initial testing and conceptual surveys. The recommended focus is on microfibers due to the versatility of fiber structure configurations, the wide choice of fiber materials available, the maturity of the fiber processing industry, and past experience with fibers in insulation applications

Summary of the National Toxicology Program benzidine dye initiative.

PubMed Central

Morgan, D L; Dunnick, J K; Goehl, T; Jokinen, M P; Matthews, H B; Zeiger, E; Mennear, J H

1994-01-01

The benzidine dye initiative is a research program established by the National Toxicology Program to generate an integrated body of scientific information regarding the potential health risks associated with exposure to benzidine- and benzidine-congener-derived dyes. Because an in-depth evaluation of each of the hundreds of benzidine-congener-derived dyes was considered impractical, the research program was designed to study the metabolism and disposition, genetic toxicity, and in vivo toxicity and carcinogenicity of two primary benzidine congeners, 3,3'-dimethylbenzidine and 3,3'-dimethoxybenzidine, and a select group of prototypical dyes derived from those amines. It was anticipated that by applying the basic information generated in these extensive studies, it would be possible to make regulatory decisions about other dyes after conducting only a minimal number of experiments such as studies of disposition and metabolism, and in vitro mutagenicity. This paper summarizes the results of studies conducted to evaluate the metabolism, disposition, mutagenicity, toxicity, and carcinogenicity of representative benzidine congeners and derived dyes. PMID:7925189

The effects of free recall testing on subsequent source memory.

PubMed

Brewer, Gene A; Marsh, Richard L; Meeks, Joseph T; Clark-Foos, Arlo; Hicks, Jason L

2010-05-01

The testing effect is the finding that prior retrieval of information from memory will result in better subsequent memory for that material. One explanation for these effects is that initial free recall testing increases the recollective details for tested information, which then becomes more available during a subsequent test phase. In three experiments we explored this hypothesis using a source-monitoring test phase after the initial free recall tests. We discovered that memory is differentially enhanced for certain recollective details depending on the nature of the free recall task. Thus further research needs to be conducted to specify how different kinds of memorial details are enhanced by free recall testing.

Seventeen years of life support courses for nurses: where are we now?

PubMed

Heng, Kenneth; Wee, Fong Chi

2017-07-01

The Life Support Course for Nurses (LSCN) equips nurses with the resuscitation skills to be first responders in in-hospital cardiac arrests. Seventeen years after the initiation of the LSCN, a confidential cross-sectional Qualtrics™ survey was conducted in May 2016 on LSCN graduands to assess the following: confidence in nurse-initiated resuscitation post-LSCN; defibrillation experience and outcomes; and perceived barriers and usefulness of the LSCN. The majority of respondents reported that the course was useful and enhanced their confidence in resuscitation. Skills retention can be enhanced by organising frequent team-based resuscitation training. Resuscitation successes should be publicised to help overcome perceived barriers. Copyright: © Singapore Medical Association.

Soil erosion and effluent particle size distribution under different initial conditions and rock fragment coverage

NASA Astrophysics Data System (ADS)

Jomaa, S.; Barry, D. A.; Brovelli, A.; Heng, B. C. P.; Sander, G. C.; Parlange, J.-Y.

2012-04-01

It is well known that the presence of rock fragments on the soil surface and the soil's initial characteristics (moisture content, surface roughness, bulk density, etc.) are key factors influencing soil erosion dynamics and sediment delivery. In addition, the interaction of these factors increases the complexity of soil erosion patterns and makes predictions more difficult. The aim of this study was (i) to investigate the effect of soil initial conditions and rock fragment coverage on soil erosion yields and effluent particle size distribution and (ii) to evaluate to what extent the rock fragment coverage controls this relationship. Three laboratory flume experiments with constant precipitation rate of 74 mm/h on a loamy soil parcel with a 2% slope were performed. Experiments with duration of 2 h were conducted using the 6-m × 2-m EPFL erosion flume. During each experiment two conditions were considered, a bare soil and a rock fragment-protected (with 40% coverage) soil. The initial soil surface state was varied between the three experiments, from a freshly re-ploughed and almost dry condition to a compacted soil with a well-developed shield layer and high moisture content. Experiments were designed so that rain splash was the primary driver of soil erosion. Results showed that the amount of eroded mass was highly controlled by the initial soil conditions and whether the steady-state equilibrium was un-, partially- or fully- developed during the previous event. Additionally, results revealed that sediment yields and particle size composition in the initial part of an erosion event are more sensitive to the erosion history than the long-time behaviour. This latter appears to be mainly controlled by rainfall intensity. If steady-state was achieved for a previous event, then the next event consistently produced concentrations for each size class that peaked rapidly, and then declined gradually to steady-state equilibrium. If steady state was not obtained, then different and more complex behaviour was observed in the next event, with large differences found between fine, medium and coarse size classes. The presence of rock fragments on the topsoil reduced the time needed to reach steady state compared with the bare soil. This was attributed to the reduction of rain splash erosion caused by the rapid development of the overland flow, as a result of rock fragments reducing the flow cross-sectional area.

Reported implementation lessons from a national quality improvement initiative; Productive Ward: Releasing Time to Care™. A qualitative, ward-based team perspective.

PubMed

White, Mark; Butterworth, Tony; Wells, John S G

2017-10-01

To explore the experiences of participants involved in the implementation of the Productive Ward: Releasing Time to Care™ initiative in Ireland, identifying key implementation lessons. A large-scale quality improvement programme Productive Ward: Releasing Time to Care™ was introduced nationwide into Ireland in 2011. We captured accounts from ward-based teams in an implementation phase during 2013-14 to explore their experiences. Semi-structured, in-depth interviews with a purposive sample of 24 members of ward-based teams from nine sites involved in the second national phase of the initiative were conducted. Interviews were analysed and coded under themes, using a seven-stage iterative process. The predominant theme identified was associated with the implementation and management of the initiative and included: project management; training; preparation; information and communication; and participant's negative experiences. The most prominent challenge reported related to other competing clinical priorities. Despite the structured approach of Productive Ward: Releasing Time to Care™, it appears that overstretched and busy clinical environments struggle to provide the right climate and context for ward-based teams to engage and interact actively with quality improvement tools, methods and activities. Findings highlight five key aspects of implementation and management that will help facilitate successful adoption of large-scale, ward-based quality improvement programmes such as Productive Ward: Releasing Time to Care™. Utilising pre-existing implementation or quality frameworks to assess each ward/unit for 'readiness' prior to commencing a quality improvement intervention such as Productive Ward: Releasing Time to Care™ should be considered. © 2017 John Wiley & Sons Ltd.

A Personal Perspective on the Initial Federal Health-Based Regulation to Remove Lead from Gasoline

PubMed Central

Bridbord, Kenneth; Hanson, David

2009-01-01

Objective This article describes the personal experience and perspective of the authors, who had primary responsibility for drafting the initial health-based regulation limiting lead content of gasoline during the early 1970s while employed by the U.S. Environmental Protection Agency (EPA). Data source Information used by the U.S. EPA in developing the initial health-based regulation limiting lead content of gasoline in December 1973 and studies documenting the impact of that and subsequent actions. Data extraction Among the lessons learned from this experience is the importance of having input from independent scientists to the regulatory decision-making process. This also demonstrates the critical role of independent peer-reviewed research, such as that supported by the National Institutes of Health, as well as research conducted by scientists from the Centers for Disease Control and Prevention, in delineating the consequences of lead exposure in the population. Data synthesis Removal of lead from gasoline in the United States has been described as one of the great public health achievements of the 20th century, but it almost did not happen. The experience of the authors in developing this regulation may be helpful to others involved in developing health-based regulatory policy in the future. Conclusion The initial U.S. EPA health-based regulation to remove lead from gasoline is clearly an example where science successfully affected public policy. The leadership of the U.S. EPA at that time deserves much credit for establishing an atmosphere in which this was possible. PMID:19672397

Utilizing ARC EMCS Seedling Cassettes as Highly Versatile Miniature Growth Chambers for Model Organism Experiments

NASA Technical Reports Server (NTRS)

Freeman, John L.; Steele, Marianne K.; Sun, Gwo-Shing; Heathcote, David; Reinsch, S.; DeSimone, Julia C.; Myers, Zachary A.

2014-01-01

The aim of our ground testing was to demonstrate the capability of safely putting specific model organisms into dehydrated stasis, and to later rehydrate and successfully grow them inside flight proven ARC EMCS seedling cassettes. The ARC EMCS seedling cassettes were originally developed to support seedling growth during space flight. The seeds are attached to a solid substrate, launched dry, and then rehydrated in a small volume of media on orbit to initiate the experiment. We hypothesized that the same seedling cassettes should be capable of acting as culture chambers for a wide range of organisms with minimal or no modification. The ability to safely preserve live organisms in a dehydrated state allows for on orbit experiments to be conducted at the best time for crew operations and more importantly provides a tightly controlled physiologically relevant growth experiment with specific environmental parameters. Thus, we performed a series of ground tests that involved growing the organisms, preparing them for dehydration on gridded Polyether Sulfone (PES) membranes, dry storage at ambient temperatures for varying periods of time, followed by rehydration. Inside the culture cassettes, the PES membranes were mounted above blotters containing dehydrated growth media. These were mounted on stainless steel bases and sealed with plastic covers that have permeable membrane covered ports for gas exchange. The results showed we were able to demonstrate acceptable normal growth of C.elegans (nematodes), E.coli (bacteria), S.cerevisiae (yeast), Polytrichum (moss) spores and protonemata, C.thalictroides (fern), D.discoideum (amoeba), and H.dujardini (tardigrades). All organisms showed acceptable growth and rehydration in both petri dishes and culture cassettes initially, and after various time lengths of dehydration. At the end of on orbit ISS European Modular Cultivation System experiments the cassettes could be frozen at ultra-low temperatures, refrigerated, or chemically preserved before being returned to Earth for analyses. Our results suggest that with protocol modifications and future verification testing we can utilize the versatile EMCS to conduct tightly controlled experiments inside our culture cassettes for a wide variety of organisms. These physiological experiments would be designed to answer questions at the molecular level about the specific stress responses of space flight.

Some Recent Observations on the Burning of Isolated N-Heptane and Alcohol Droplets

NASA Technical Reports Server (NTRS)

Dryer, F. L.; Kazakov, A.; Urban, B. D.

2001-01-01

In a joint program involving Prof. F.A. Williams of the University of California, San Diego and Dr. V. Nayagam of the National Center for Microgravity Research on Combustion and Fluid Dynamics, the combustion of liquid fuel droplets of n-heptane, n-decane, methanol, methanol-water, ethanol and ethanol-water having initial diameters between about 1 mm and 6 mm continues to be studied. The objectives of the work are to improve fundamental knowledge of droplet combustion dynamics for pure fuels and fuel-water mixtures through microgravity experiments and theoretical analyses. The Princeton contributions to the collaborative program supports the engineering design, data analysis, and data interpretation requirements for the study of initially single component, spherically symmetric, isolated droplet combustion studies through experiments and numerical modeling. The complementary UCSD contributions apply asymptotic theoretical analyses and are described in the published literature and in a companion communication in this conference. The combined program continues to focus on analyses of results obtained from Fiber Supported Droplet Combustion (FSDC) experiments (FSDC-2, STS- 94) conducted with the above fuels in shuttle cabin air and Droplet Combustion Experiment (DCE) data obtained for unsupported and fiber supported droplets of n-heptane in Helium-Oxygen mixtures and cabin air (STS-83, STS-94). The program is preparing for a second DCE experimental mission using methanol/methanol-water as fuels and helium-oxygen-nitrogen environments. DCE-2 is to be conducted aboard the International Space Station. Emphases of recent Princeton work are on the study of simple alcohols (methanol, ethanol) and alcohol/water mixtures as fuels, with time-dependent measurements of drop size, flame-standoff, liquid-phase composition, and finally, extinction. Ground based experiments have included bench-scale studies at Princeton and collaborative experimental studies in the 2.2 second drop tower at NASA-Glenn Research Center.

The lived experiences of resilience in Iranian adolescents living in residential care facilities: A hermeneutic phenomenological study

PubMed Central

Nourian, Manijeh; Nourozi Tabrizi, Kian; Rassouli, Maryam; Biglarrian, Akbar

2016-01-01

Background Resilience is one of the main factors affecting human health, and perceiving its meaning for high-risk adolescents is of particular importance in initiating preventive measures and providing resilience care. Objectives This qualitative study was conducted to explain the meaning of resilience in the lived experiences of Iranian adolescents living in governmental residential care facilities. Materials and methods This study was conducted using the hermeneutic phenomenological method. Semi-structured interviews were conducted with eight adolescents aged 13–17 living in governmental residential care facilities of Tehran province affiliated to the Welfare Organization of Iran who articulated their experiences of resilience. Sampling lasted from May 2014 to July 2015 and continued until new themes were no longer emerging. The researchers analyzed the verbatim transcripts using Van Manen's six-step method of phenomenology. Results The themes obtained in this study included “going through life's hardships,” “aspiring for achievement,” “self-protection,” “self-reliance,” and “spirituality.” Conclusion Our study indicates that the meaning of resilience coexists with self-reliance in adolescents’ lived experiences. Adolescents look forward to a better future. They always trust God in the face of difficulties and experience resilience by keeping themselves physically and mentally away from difficulties. Adverse and bitter experiences of the past positively affected their positive view on life and its difficulties and also their resilience. The five themes that emerged from the findings describe the results in detail. The findings of this study enable nurses, health administrators, and healthcare providers working with adolescents to help this vulnerable group cope better with their stressful life conditions and improve their health through increasing their capacity for resilience. PMID:26942909

Decision-making Processes among Prostate Cancer Survivors with Rising PSA Levels: Results from a Qualitative Analysis.

PubMed

Shen, Megan Johnson; Nelson, Christian J; Peters, Ellen; Slovin, Susan F; Hall, Simon J; Hall, Matt; Herrera, Phapichaya Chaoprang; Leventhal, Elaine A; Leventhal, Howard; Diefenbach, Michael A

2015-05-01

Prostate cancer survivors with a rising prostate-specific antigen (PSA) level have few treatment options, experience a heightened state of uncertainty about their disease trajectory that might include the possibility of cancer metastasis and death, and often experience elevated levels of distress as they have to deal with a disease they thought they had conquered. Guided by self-regulation theory, the present study examined the cognitive and affective processes involved in shared decision making between physicians and patients who experience a rising PSA after definitive treatment for prostate cancer. In-depth interviews were conducted with 34 prostate cancer survivors who had been diagnosed with a rising PSA (i.e., biochemical failure) within the past 12 months. Survivors were asked about their experiences and affective responses after being diagnosed with a rising PSA and while weighing potential treatment options. In addition, patients were asked about their decision-making process for the initial prostate cancer treatment. Compared with the initial diagnosis, survivors with a rising PSA reported increased negative affect following their diagnosis, concern about the treatability of their disease, increased planning and health behavior change, heightened levels of worry preceding doctor appointments (especially prior to the discussion of PSA testing results), and a strong reliance on physicians' treatment recommendations. Prostate cancer survivors' decision-making processes for the treatment of a rising PSA are markedly different from those of the initial diagnosis of prostate cancer. Because patients experience heightened distress and rely more heavily on their physicians' recommendations with a rising PSA, interactions with the health care provider provide an excellent opportunity to address and assist patients with managing the uncertainty and distress inherent with rising PSA levels. © The Author(s) 2014.

Interfacial Granular Intrusions

NASA Astrophysics Data System (ADS)

Linden, Paul; Zheng, Zhong; Huppert, Herbert; Vriend, Nathalie; Neufeld, Jerome

2017-11-01

We study experimentally the intrusion of light granular material into an inviscid fluid of greater density. Despite a rich set of related geophysical and environmental phenomena, such as the spreading of calved ice and volcanic ash and debris flows, there are few previous studies on this topic. We conduct a series of lock-release experiments of light spherical beads into a rectangular tank initially filled with either fresh water or salt water, and record the time evolution of the interface shape and the front location of the current of beads. In particular, we find that the front location obeys a power-law behaviour during an intermediate time period following the release of the lock before the nose of beads reaches a maximum runout distance within a finite time. We investigate the dependence of the scaling exponent and runout distance on the total amount of beads, the initial lock length, and the properties of the liquid that fills the tank in the experiments. Appropriate scaling arguments are provided to collapse the raw experimental data into universal curves, which can be used to describe the front dynamics of light granular intrusions with different size and buoyancy effects and initial aspect ratios.

Methanol Droplet Extinction in Carbon-Dioxide-Enriched Environments in Microgravity

NASA Technical Reports Server (NTRS)

Hicks, Michael C.; Nayagam, Vedha; Williams, Forman A.

2010-01-01

Diffusive extinction of methanol droplets with initial diameters between 1.25 mm and 1.72 mm, burning in a quiescent microgravity environment at one atmosphere pressure, was obtained experimentally for varying levels of ambient carbon-dioxide concentrations with a fixed oxygen concentration of 21% and a balance of nitrogen. These experiments serve as precursors to those which are beginning to be performed on the International Space Station and are motivated by the need to understand the effectiveness of carbon-dioxide as a fire suppressant in low-gravity environments. In these experiments, the flame standoff distance, droplet diameter, and flame radiation are measured as functions of time. The results show that the droplet extinction diameter depends on both the initial droplet diameter and the ambient concentration of carbon dioxide. Increasing the initial droplet diameter leads to an increased extinction diameter, while increasing the carbon-dioxide concentration leads to a slight decrease in the extinction diameter. These results are interpreted using a critical Damk hler number for extinction as predicted by an earlier theory, which is extended here to be applicable in the presence of effects of heat conduction along the droplet support fibers and of the volume occupied by the support beads

Exploring experiences among adopters during the diffusion of a novel dance intervention in Sweden.

PubMed

Carlsson, Noomi; Kullberg, Agneta; Johansson, Ida-Klara; Bergman, Paula; Skagerström, Janna; Andersson, Agneta

2018-12-01

There is a demand for interventions aimed at adolescent girls with psychosomatic problems. In 2013, positive results were reported from a dance intervention programme addressing girls with internalizing problems. The research team behind the intervention immediately received requests from municipalities and county councils interested in using the intervention. From an implementation point of view it is unclear what made the intervention spread without an active plan. The aim of this study was to explore adopters' experiences about the diffusion and initiation of a public health intervention targeting adolescent girls with internalizing problems. Interviews were conducted with 12 people who were engaged in initiating the intervention in different settings. Data were analysed using conventional content analysis, yielding three categories: perceived appeal and trustworthiness, convenient information, and contextual factors. The results reflected that the participants found that there was a need for an intervention and found the dance intervention to be evidence based and not too complex to perform. Further, there was available information on the project which could easily be distributed to decision makers and others. When initiating the intervention, factors related to economy, possibility for collaboration and recruitment were of importance.

Kinetics of styrene biodegradation by Pseudomonas sp. E-93486.

PubMed

Gąszczak, Agnieszka; Bartelmus, Grażyna; Greń, Izabela

2012-01-01

The research into kinetics of styrene biodegradation by bacterial strain Pseudomonas sp. E-93486 coming from VTT Culture Collection (Finland) was presented in this work. Microbial growth tests in the presence of styrene as the sole carbon and energy source were performed both in batch and continuous cultures. Batch experiments were conducted for initial concentration of styrene in the liquid phase changed in the range of 5-90 g m(-3). The Haldane model was found to be the best to fit the kinetic data, and the estimated constants of the equation were: μ (m) = 0.1188 h(-1), K(S) = 5.984 mg l(-1), and K (i) = 156.6 mg l(-1). The yield coefficient mean value [Formula in text] for the batch culture was 0.72 g(dry cells weight) (g(substrate))(-1). The experiments conducted in a chemostat at various dilution rates (D = 0.035-0.1 h(-1)) made it possible to determine the value of the coefficient for maintenance metabolism m (d) = 0.0165 h(-1) and the maximum yield coefficient value [Formula in text]. Chemostat experiments confirmed the high value of yield coefficient [Formula in text] observed in the batch culture. The conducted experiments showed high activity of the examined strain in the styrene biodegradation process and a relatively low sensitivity to inhibition of its growth at higher concentrations of styrene in the solution. Such exceptional features of Pseudomonas sp. E-93486 make this bacterial strain the perfect candidate for technical applications.

Development of the Contact Lens User Experience: CLUE Scales

PubMed Central

Wirth, R. J.; Edwards, Michael C.; Henderson, Michael; Henderson, Terri; Olivares, Giovanna; Houts, Carrie R.

2016-01-01

ABSTRACT Purpose The field of optometry has become increasingly interested in patient-reported outcomes, reflecting a common trend occurring across the spectrum of healthcare. This article reviews the development of the Contact Lens User Experience: CLUE system designed to assess patient evaluations of contact lenses. CLUE was built using modern psychometric methods such as factor analysis and item response theory. Methods The qualitative process through which relevant domains were identified is outlined as well as the process of creating initial item banks. Psychometric analyses were conducted on the initial item banks and refinements were made to the domains and items. Following this data-driven refinement phase, a second round of data was collected to further refine the items and obtain final item response theory item parameters estimates. Results Extensive qualitative work identified three key areas patients consider important when describing their experience with contact lenses. Based on item content and psychometric dimensionality assessments, the developing CLUE instruments were ultimately focused around four domains: comfort, vision, handling, and packaging. Item response theory parameters were estimated for the CLUE item banks (377 items), and the resulting scales were found to provide precise and reliable assignment of scores detailing users’ subjective experiences with contact lenses. Conclusions The CLUE family of instruments, as it currently exists, exhibits excellent psychometric properties. PMID:27383257

Internal Gravity Waves: Generation and Breaking Mechanisms by Laboratory Experiments

NASA Astrophysics Data System (ADS)

la Forgia, Giovanni; Adduce, Claudia; Falcini, Federico

2016-04-01

Internal gravity waves (IGWs), occurring within estuaries and the coastal oceans, are manifest as large amplitude undulations of the pycnocline. IGWs propagating horizontally in a two layer stratified fluid are studied. The breaking of an IGW of depression shoaling upon a uniformly sloping boundary is investigated experimentally. Breaking dynamics beneath the shoaling waves causes both mixing and wave-induced near-bottom vortices suspending and redistributing the bed material. Laboratory experiments are conducted in a Perspex tank through the standard lock-release method, following the technique described in Sutherland et al. (2013). Each experiment is analysed and the instantaneous pycnocline position is measured, in order to obtain both geometric and kinematic features of the IGW: amplitude, wavelength and celerity. IGWs main features depend on the geometrical parameters that define the initial experimental setting: the density difference between the layers, the total depth, the layers depth ratio, the aspect ratio, and the displacement between the pycnoclines. Relations between IGWs geometric and kinematic features and the initial setting parameters are analysed. The approach of the IGWs toward a uniform slope is investigated in the present experiments. Depending on wave and slope characteristics, different breaking and mixing processes are observed. Sediments are sprinkled on the slope to visualize boundary layer separation in order to analyze the suspension e redistribution mechanisms due to the wave breaking.

Barriers to investigator-initiated deep brain stimulation and device research

PubMed Central

Malone, Donald; Okun, Michael S.; Booth, Joan; Machado, Andre G.

2014-01-01

The success of device-based research in the clinical neurosciences has overshadowed a critical and emerging problem in the biomedical research environment in the United States. Neuroprosthetic devices, such as deep brain stimulation (DBS), have been shown in humans to be promising technologies for scientific exploration of neural pathways and as powerful treatments. Large device companies have, over the past several decades, funded and developed major research programs. However, both the structure of clinical trial funding and the current regulation of device research threaten investigator-initiated efforts in neurologic disorders. The current atmosphere dissuades clinical investigators from pursuing formal and prospective research with novel devices or novel indications. We review our experience in conducting a federally funded, investigator-initiated, device-based clinical trial that utilized DBS for thalamic pain syndrome. We also explore barriers that clinical investigators face in conducting device-based clinical trials, particularly in early-stage studies or small disease populations. We discuss 5 specific areas for potential reform and integration: (1) alternative pathways for device approval; (2) eliminating right of reference requirements; (3) combining federal grant awards with regulatory approval; (4) consolidation of oversight for human subjects research; and (5) private insurance coverage for clinical trials. Careful reformulation of regulatory policy and funding mechanisms is critical for expanding investigator-initiated device research, which has great potential to benefit science, industry, and, most importantly, patients. PMID:24670888

Client-therapist agreement in the termination process and its association with therapeutic relationship.

PubMed

Olivera, Julieta; Challú, Laura; Gómez Penedo, Juan Martín; Roussos, Andrés

2017-03-01

There is no consensus among different therapeutic approaches on the process of termination when therapy does not have a prefixed duration. Moreover, both clinicians and researchers are still exploring decision making in the termination of treatment. The present study assessed former client's perspective of therapy termination in a nonprobabilistic sample from Buenos Aires, Argentina. Seventy-three semistructured interviews, lasting ∼60 min each, were conducted with participants that had finished a therapeutic treatment or dropped out. They were asked about several aspects of therapy, including their experience of termination, specifically who decided to terminate, if there was agreement on termination or not, and their thoughts on the termination process. All interviews were transcribed and analyzed using an adaptation of Consensual Qualitative Research (CQR). Quantitative analyses were also conducted to examine associations between variables. Two main factors emerged from the analysis: client/therapist initiative on termination; and level of agreement between client and therapist regarding termination. Whereas nearly all (95%) of therapist-initiated termination cases agreed on termination, client-initiated termination cases could be sorted in agreed (49%) and disagreed (51%) terminations. Both therapist-initiated terminations and agreed upon terminations presented more categories of positive termination motives, better therapeutic bond, and higher overall satisfaction with treatment. Implications for research and clinical practice are discussed. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Perceptibility and the "Choice Experience": User Sensory Perceptions and Experiences Inform Vaginal Prevention Product Design.

PubMed

Guthrie, Kate Morrow; Dunsiger, Shira; Vargas, Sara E; Fava, Joseph L; Shaw, Julia G; Rosen, Rochelle K; Kiser, Patrick F; Kojic, E Milu; Friend, David R; Katz, David F

The development of pericoital (on demand) vaginal HIV prevention technologies remains a global health priority. Clinical trials to date have been challenged by nonadherence, leading to an inability to demonstrate product efficacy. The work here provides new methodology and results to begin to address this limitation. We created validated scales that allow users to characterize sensory perceptions and experiences when using vaginal gel formulations. In this study, we sought to understand the user sensory perceptions and experiences (USPEs) that characterize the preferred product experience for each participant. Two hundred four women evaluated four semisolid vaginal formulations using the USPE scales at four randomly ordered formulation evaluation visits. Women were asked to select their preferred formulation experience for HIV prevention among the four formulations evaluated. The scale scores on the Sex-associated USPE scales (e.g., Initial Penetration and Leakage) for each participant's selected formulation were used in a latent class model analysis. Four classes of preferred formulation experiences were identified. Sociodemographic and sexual history variables did not predict class membership; however, four specific scales were significantly related to class: Initial Penetration, Perceived Wetness, Messiness, and Leakage. The range of preferred user experiences represented by the scale scores creates a potential target range for product development, such that products that elicit scale scores that fall within the preferred range may be more acceptable, or tolerable, to the population under study. It is recommended that similar analyses should be conducted with other semisolid vaginal formulations, and in other cultures, to determine product property and development targets.

Practical strategies and perceptions from community pharmacists following their experiences with conducting pharmacy practice research: a qualitative content analysis.

PubMed

De Vera, Mary A; Campbell, Natasha K J; Chhina, Harpreet; Galo, Jessica S; Marra, Carlo

2017-10-26

While prior research identified barriers to conducting research in community pharmacies, there remains a need to better understand facilitators to ensure successful collaborations between academic researchers and pharmacists. Our objective was to determine the experiences and perspectives of community pharmacists who have recently conducted a pharmacy practice-based research study to gain in-depth understanding of challenges as well as facilitators and identify strategies and solutions. We conducted a qualitative study involving one-on-one semi-structured telephone interviews with community pharmacists following the completion of a practice-based research study in their pharmacies. Interview transcripts were analysed using inductive content analysis involving open coding, creating categories and abstraction into final themes. Eleven pharmacists participated in the qualitative interviews. We identified six major themes including: (1) barriers (e.g. time constraints); (2) facilitators (e.g. ideal pharmacy layout); (3) support and resources from academic researchers (e.g. helpfulness of training, easy-to-use study materials); (4) pharmacist-initiated strategies for conducting research (beyond prior suggestions from researchers); (5) suggestions for future pharmacy practice research; and (6) motivation for conducting pharmacy practice research. These findings informed practical strategies targeted at academic researchers and pharmacists, respectively, to facilitate the conduct of research in community pharmacists across various stages of the research process. Our study adds to better understanding of community pharmacists' perspectives on conducting research and identifies practical solutions that can be readily implemented by academic researchers and pharmacists participating in research. © 2017 Royal Pharmaceutical Society.

[Initial experience of proton beam therapy at the new facility of the University of Tsukuba].

PubMed

Kagei, Kenji; Tokuuye, Koichi; Sugahara, Shinji; Hata, Masaharu; Igaki, Hiroshi; Hashimoto, Takayuki; Ohara, Kiyoshi; Akine, Yasuyuki

2004-05-01

To present the initial experience with proton beam therapy at the new Proton Medical Research Center (PMRC) of the University of Tsukuba. The new facility has a synchrotron with maximum energy of 250MeV and two rotational gantries. We treated 105 patients with 120 lesions with proton beams in the first year, beginning in September 2001. The most common lesion treated was primary liver cancer (40 lesions) followed by lung cancer, head and neck cancers, and prostate cancer. Concurrent X-ray radiotherapy was given for 38 of the 120 lesions. The median follow-up period was 11 months (range, 1-19 months). Of the 105 patients, 97% had Grade 0-2 RTOG/EORTC acute morbidities, while the remaining 3% had Grade 3. Tumor response after irradiation was CR for 35% of the lesions, PR for 25%, SD for 22%, PD for 9%, and not evaluated for 9%. The proton beam therapy conducted at the new facility of the University of Tsukuba was safe and effective.

Novel high-frequency, high-power, pulsed oscillator based on a transmission line transformer.

PubMed

Burdt, R; Curry, R D

2007-07-01

Recent analysis and experiments have demonstrated the potential for transmission line transformers to be employed as compact, high-frequency, high-power, pulsed oscillators with variable rise time, high output impedance, and high operating efficiency. A prototype system was fabricated and tested that generates a damped sinusoidal wave form at a center frequency of 4 MHz into a 200 Omega load, with operating efficiency above 90% and peak power on the order of 10 MW. The initial rise time of the pulse is variable and two experiments were conducted to demonstrate initial rise times of 12 and 3 ns, corresponding to a spectral content from 4-30 and from 4-100 MHz, respectively. A SPICE model has been developed to accurately predict the circuit behavior and scaling laws have been identified to allow for circuit design at higher frequencies and higher peak power. The applications, circuit analysis, test stand, experimental results, circuit modeling, and design of future systems are all discussed.

Analysis of sexual behavior in adolescents.

PubMed

Teva, Inmaculada; Bermudez, M Paz; Ramiro, Maria T; Ramiro-Sanchez, Tamara

2013-10-01

The aim of this study was to describe some characteristics of vaginal, anal and oral sexual behavior in Spanish adolescents. It was a cross-sectional descriptive population study conducted using a probabilistic sample survey. The sample was composed of 4,612 male and female adolescents, of whom 1,686 reported having penetrative sexual experience. Sample size was established with a 97% confidence level and a 3% estimation error. Data collection took place in secondary education schools. Mean age of vaginal sex initiation was 15 years. Compared to females, males reported an earlier age of anal and oral sex initiation and a larger number of vaginal and anal sexual partners. Males also reported a higher frequency of penetrative sexual relations under the influence of alcohol or other drugs. A higher percentage of females than males reported not using a condom in their first anal sexual experience. This study provides a current overview of the sexual behavior of adolescents that can be useful for the design of future programs aimed at preventing HIV and sexually transmitted infections (STIs).

Sextant X-Ray Pulsar Navigation Demonstration: Initial On-Orbit Results

NASA Technical Reports Server (NTRS)

Mitchell, Jason W.; Winternitz, Luke M.; Hassouneh, Munther A.; Price, Samuel R.; Semper, Sean R.; Yu, Wayne H.; Ray, Paul S.; Wolff, Michael T.; Kerr, Matthew; Wood, Kent S.;

Effect of Water on the Thermo-Mechanical Behavior of Carbon Cloth Phenolic

NASA Technical Reports Server (NTRS)

Sullivan, Roy M.; Stokes, Eric; Baker, Eric H.

2011-01-01

The results of thermo-mechanical experiments, which were conducted previously by one of the authors, are reviewed. The strain in the direction normal to the fabric plane was measured as a function of temperature for a variety of initial moisture contents and heating rates. In this paper, the general features of the thermo-mechanical response are discussed and the effect of heating rate and initial moisture content are highlighted. The mechanical interaction between the phenolic polymer and water trapped within its free volumes as the polymer is heated to high temperatures is discussed. An equation for the internal stresses which are generated within the polymer due to trapped water is obtained from the total stress expression for a binary mixture of polymer and water. Numerical solutions for moisture diffusion in the thermo-mechanical experiments were performed and the results of these solutions are presented. The results of the moisture diffusion solutions help to explain the effects of heating rate and moisture content on the strain behavior normal to the fabric plane.

Development of compact explosively driven ferromagnetic seed source for helical magnetic flux compression generator

NASA Astrophysics Data System (ADS)

Liu, Peng; Zhang, He; Ma, Shaojie; Shi, Yunlei

2018-05-01

A compact explosively driven ferromagnetic generator (FMG) is developed for seed power source of helical magnetic flux compression generator (HMFCG). The mechanism of FMG is studied by establishing a magnetoelectric conversion model. Analytical calculations and numerical simulations are conducted on the magnetostatic field of open-circuit magnet in FMG. The calculation method for the magnet's cross-sectional magnetic flux is obtained. The pulse sources made of different materials and equipped with different initiation modes are experimentally explored. Besides, the dynamic coupling experiments of FMG and HMFCG are carried out. The results show that, N35 single-ended and double-ended initiating FMGs have an energy conversion efficiency ηt not less than 14.6% and 24.4%, respectively; FMG has an output pulse current not less than 4kA and an energy of about 3J on 320nH inductive load; HMFCG experiences energy gains of about 2-3 times. FMG and HMFCG can be coupled to form a full-blast electrical driving pulse source.

Swapping Horses Midstream: Factors Related to Physicians’ Changing Their Minds About a Diagnosis

PubMed Central

Eva, Kevin W.; Link, Carol L.; Lutfey, Karen E.; McKinlay, John B.

2013-01-01

Purpose Premature closure has been identified as the single most common cause of diagnostic error. The authors conducted a factorial experiment to explore which variables exert an unconfounded influence on physicians’ diagnostic flexibility (changing their minds about the most likely diagnosis during a clinical case presentation). Methods In 2007–2008, 256 practicing physicians viewed a clinically authentic vignette simulating a patient presenting with possible coronary heart disease (CHD), provided their initial impression midway through the case, answered questions about the case, indicated how they would continue their clinical investigation, and made a final diagnosis. The authors used general linear models to determine which patient factors (age, gender, socioeconomic status, race), physician factors (gender, age/experience), and process variables were related to the likelihood of physicians’ changing their minds about the most likely diagnosis. Results Physicians who had less experience, those who named a non-CHD diagnosis as their initial impression, and those who did not ask for information about the patient’s prior cardiac disease history were the most likely to change their minds. Participants’ certainty in their initial diagnosis, the additional information desired, the diagnostic hypotheses generated, and the follow-up intended were not related to the likelihood of change in diagnostic hypotheses. Discussion While efforts encouraging physicians to avoid cognitive biases and to reason in a more analytic manner may yield some benefit, this study suggests that experience is a more important determinant of diagnostic flexibility than is the consideration of additional diagnoses or the amount of additional information collected. PMID:20592506

Factors influencing research engagement: research interest, confidence and experience in an Australian speech-language pathology workforce.

PubMed

Finch, Emma; Cornwell, Petrea; Ward, Elizabeth C; McPhail, Steven M

2013-04-19

Recent initiatives within an Australia public healthcare service have seen a focus on increasing the research capacity of their workforce. One of the key initiatives involves encouraging clinicians to be research generators rather than solely research consumers. As a result, baseline data of current research capacity are essential to determine whether initiatives encouraging clinicians to undertake research have been effective. Speech pathologists have previously been shown to be interested in conducting research within their clinical role; therefore they are well positioned to benefit from such initiatives. The present study examined the current research interest, confidence and experience of speech language pathologists (SLPs) in a public healthcare workforce, as well as factors that predicted clinician research engagement. Data were collected via an online survey emailed to an estimated 330 SLPs working within Queensland, Australia. The survey consisted of 30 questions relating to current levels of interest, confidence and experience performing specific research tasks, as well as how frequently SLPs had performed these tasks in the last 5 years. Although 158 SLPs responded to the survey, complete data were available for only 137. Respondents were more confident and experienced with basic research tasks (e.g., finding literature) and less confident and experienced with complex research tasks (e.g., analysing and interpreting results, publishing results). For most tasks, SLPs displayed higher levels of interest in the task than confidence and experience. Research engagement was predicted by highest qualification obtained, current job classification level and overall interest in research. Respondents generally reported levels of interest in research higher than their confidence and experience, with many respondents reporting limited experience in most research tasks. Therefore SLPs have potential to benefit from research capacity building activities to increase their research skills in order to meet organisational research engagement objectives. However, these findings must be interpreted with the caveats that a relatively low response rate occurred and participants were recruited from a single state-wide health service, and therefore may not be representative of the wider SLP workforce.

How to Make Data a Blessing to Parametric Uncertainty Quantification and Reduction?

NASA Astrophysics Data System (ADS)

Ye, M.; Shi, X.; Curtis, G. P.; Kohler, M.; Wu, J.

2013-12-01

In a Bayesian point of view, probability of model parameters and predictions are conditioned on data used for parameter inference and prediction analysis. It is critical to use appropriate data for quantifying parametric uncertainty and its propagation to model predictions. However, data are always limited and imperfect. When a dataset cannot properly constrain model parameters, it may lead to inaccurate uncertainty quantification. While in this case data appears to be a curse to uncertainty quantification, a comprehensive modeling analysis may help understand the cause and characteristics of parametric uncertainty and thus turns data into a blessing. In this study, we illustrate impacts of data on uncertainty quantification and reduction using an example of surface complexation model (SCM) developed to simulate uranyl (U(VI)) adsorption. The model includes two adsorption sites, referred to as strong and weak sites. The amount of uranium adsorption on these sites determines both the mean arrival time and the long tail of the breakthrough curves. There is one reaction on the weak site but two reactions on the strong site. The unknown parameters include fractions of the total surface site density of the two sites and surface complex formation constants of the three reactions. A total of seven experiments were conducted with different geochemical conditions to estimate these parameters. The experiments with low initial concentration of U(VI) result in a large amount of parametric uncertainty. A modeling analysis shows that it is because the experiments cannot distinguish the relative adsorption affinity of the strong and weak sites on uranium adsorption. Therefore, the experiments with high initial concentration of U(VI) are needed, because in the experiments the strong site is nearly saturated and the weak site can be determined. The experiments with high initial concentration of U(VI) are a blessing to uncertainty quantification, and the experiments with low initial concentration help modelers turn a curse into a blessing. The data impacts on uncertainty quantification and reduction are quantified using probability density functions of model parameters obtained from Markov Chain Monte Carlo simulation using the DREAM algorithm. This study provides insights to model calibration, uncertainty quantification, experiment design, and data collection in groundwater reactive transport modeling and other environmental modeling.

A Phenomenological Research Study of the Experience of Teachers in the Virgin Islands Teacher Enhancement in Mathematics and Science Project

NASA Astrophysics Data System (ADS)

Thurland, Karen C.

The purpose of conducting this study was to describe the experience of elementary teachers in a mathematics and science staff development project in the U.S. Virgin Islands. The focus of this study was to describe the meaning teachers attribute to their experience in this three year project, in which many of the national mathematics and science reform efforts were implemented. A phenomenological approach was used in order to develop a complete picture of the teachers' experiences. Data collection consisted of interviews with seven elementary teachers. The data were subjective descriptions of the teachers pertaining to the initial summer institute, the follow-up sessions, and the new innovative methods. The transcendental phenomenological model was used. The textural and structural themes included enhanced learning and changes in teaching practice, and interactions with colleagues. From these themes, individual and composite textual descriptions of the experience of the teacher participants were developed. The synthesis of those descriptions illuminated the meanings and essence of their lived experience. The findings indicate that the essence of the experience was the development of a positive attitude towards the teaching of math and science. The teachers gained confidence in their ability to motivate students with the inquiry method and taught more math and science. The implications for the Virgin Islands Department of Education include establishing a partnership with the local university to offer staff development training in mathematics and science and to conduct evaluations of its training efforts.

The National Ignition Facility: an experimental platform for studying behavior of matter under extreme conditions

NASA Astrophysics Data System (ADS)

Moses, Edward

2011-11-01

The National Ignition Facility (NIF), a 192-beam Nd-glass laser facility capable of producing 1.8 MJ and 500 TW of ultraviolet light, is now operational at Lawrence Livermore National Laboratory (LLNL). As the world's largest and most energetic laser system, NIF serves as the national center for the U.S. Department of Energy (DOE) and National Nuclear Security Administration to achieve thermonuclear burn in the laboratory and to explore the behavior of matter at extreme temperatures and energy densities. By concentrating the energy from all of its 192 extremely energetic laser beams into a mm3-sized target, NIF can reach the conditions required to initiate fusion reactions. NIF can also provide access to extreme scientific environments: temperatures about 100 million K, densities of 1,000 g/cm3, and pressures 100 billion times atmospheric pressure. These conditions have never been created before in a laboratory and exist naturally only in interiors of the planetary and stellar environments as well as in nuclear weapons. Since August 2009, the NIF team has been conducting experiments in support of the National Ignition Campaign (NIC)—a partnership among LLNL, Los Alamos National Laboratory, General Atomics, the University of Rochester, Sandia National Laboratories, as well as a number of universities and international collaborators. The results from these initial experiments show promise for the relatively near-term achievement of ignition. Capsule implosion experiments at energies up to 1.2 MJ have demonstrated laser energetics, radiation temperatures, and symmetry control that scale to ignition conditions. Of particular importance is the demonstration of peak hohlraum temperatures near 300 eV with overall backscatter less than 10%. Cryogenic target capability and additional diagnostics are being installed in preparation for layered target deuterium-tritium implosions to be conducted later in 2010. Important national security and basic science experiments have also been conducted on NIF. This paper describes the unprecedented experimental capabilities of NIF and the results achieved so far on the path toward ignition, for stockpile stewardship, and the beginning of frontier science experiments. The paper will also address our plans to transition NIF to a national user facility, providing access to NIF for researchers from the DOE laboratories, as well as the national and international academic and fusion energy communities.

The Impact of Gulf Stream-Induced Diabatic Forcing on Coastal Mid-Atlantic Surface Cyclogenesis

NASA Astrophysics Data System (ADS)

Cione, Joseph Jerome

In this dissertation, numerical experiments were conducted using a mesoscale atmospheric model developed at North Carolina State University. Three sets of numerical experiments were conducted and were designed to: quantify the impact Gulf Stream frontal distance, initial surface air temperature and cold air outbreak timing each have on the subsequent development of the marine atmospheric boundary layer during periods of offshore cold advection; investigate critical processes associated with Gulf Stream -induced mesocyclogenesis and; elucidate the role SST gradients and surface fluxes of heat and moisture have on the intensification and track of propagating mesocyclonic systems within the highly baroclinic Gulf Stream region. A major finding from the offshore cold advection simulations is that the initial air-sea contrast is the dominant forcing mechanism linked to the offshore circulation development and marine boundary layer modification. Results from the mesocyclogenesis experiments indicate that surface cyclogenesis was simulated to occur along a Gulf Stream meander in a region where the gradients in sea surface temperature (SST) were maximized. Results from sensitivity experiments illustrate that changes in the Gulf Stream SST gradient pattern can act to alter the timing and degree of cyclonic development simulated, while the inclusion of surface fluxes and moist convective processes during the development phase act to strongly enhance the intensity and/or occurrence of simulated mesocyclogenesis. Both observational and numerical results from studies investigating the impact strong Gulf Stream SST gradients have on the development of pre-existing, propagating cyclonic systems show that the baroclinic nature of the low level environment near the circulation center (as well as the degree of simulated/observed surface cyclonic intensification) appear to be highly dependent upon the mesoscale storm track within the Gulf Stream frontal zone. Furthermore, the numerical storm track experiments conducted in this research illustrate that surfaces fluxes can act to significantly alter the storm track of the surface mesocyclone (in addition to impacting the overall intensification of the simulated cyclonic system). This work also presents the technique development and operational utilization of the recently devised Atlantic Surface Cyclone Intensification Index (ASCII). The index continues to be implemented by the National Weather Service at the Raleigh-Durham and surrounding coastal forecast offices, and to date, has been successfully utilized for 11 coastal winter storm events over the February 1994-January 1996 period.

Numerical simulation on the powder propellant pickup characteristics of feeding system at high pressure

NASA Astrophysics Data System (ADS)

Sun, Haijun; Hu, Chunbo; Zhu, Xiaofei

2017-10-01

A numerical study of powder propellant pickup progress at high pressure was presented in this paper by using two-fluid model with kinetic theory of granular flow in the computational fluid dynamics software package ANSYS/Fluent. Simulations were conducted to evaluate the effects of initial pressure, initial powder packing rate and mean particle diameter on the flow characteristics in terms of velocity vector distribution, granular temperature, pressure drop, particle velocity and volume. The numerical results of pressure drop were also compared with experiments to verify the TFM model. The simulated results show that the pressure drop value increases as the initial pressure increases, and the granular temperature under the conditions of different initial pressures and packing rates is almost the same in the area of throttling orifice plate. While there is an appropriate value for particle size and packing rate to form a ;core-annulus; structure in powder box, and the time-averaged velocity vector distribution of solid phase is inordinate.

Underwater spark discharge with long transmission line for cleaning horizontal wells

NASA Astrophysics Data System (ADS)

Lee, Kern; Chung, Kyoung-Jae; Hwang, Y. S.; Kim, C. Y.

2017-06-01

A transmission line is discussed for application in an underwater spark-discharge technique in the cleaning of a horizontal well by incorporating a power-transmission model into the simulation. The pulsed-spark-discharge technique has been proposed for clogged-well rehabilitation, because it removes incrustations that are attached to well screens by using strong pressure waves that are generated by the rapid expansion of a spark channel. To apply the pulsed-spark-discharge technique to the cleaning of horizontal wells, the coaxial cable between the pulsed power supply and the spark gap as a load needs to be extended to a few hundred meters. Prior to field application, pulsed-spark-discharge experiments were conducted and the role of the transmission line was examined using an improved simulation model. In the model, a non-linear interaction of the spark channel and the capacitor bank is described by the pulse-forming action of the coaxial cable. Based on the accurate physical properties of the water plasma, such as the equation of state and electrical conductivity within the region of interest, the amount of energy contributed to the development of a shock wave was evaluated. The simulation shows that if the initial conditions of the spark channel are the same, no further reduction in strength of the pressure wave occurs, even if the cable length is increased above 50 m. Hence, the degraded peak pressure that was observed in the experiments using the longer cable is attributed to a change in the initial condition of the spark channel. The parametric study suggests that the low initial charging voltage, the high ambient water pressure, and the long cable length yield the low initial spark-channel density, which results in a reduced peak pressure. The simulation of line charging is presented to discuss the principle of disturbing the pre-breakdown process by an extended cable.

Stress Hormone Enhancement of OP-Induced Neuroinflammation as an Animal Model of GWI: The Role of Toll-like Receptors and Plasticity

DTIC Science & Technology

2017-09-01

water maze hippocampus neurogenesis synaptic plasticity neurotrophins corticosterone priming inflammatory mediators gene expression...remaining studies conducted on the project at the University of Illinois at Chicago. The Morris water maze was the initial behavioral test of spatial...experience with this paradigm. In this test a mouse must learn the location of an escape platform by swimming in a pool of water at room temperature

The Marshall Space Flight Center KC-135 zero gravity test program for FY 1982

NASA Technical Reports Server (NTRS)

Shurney, R. E. (Editor)

1983-01-01

During FY-82, researchers and experimenters from Marshall Space Flight Center (MSFC) conducted 11 separate investigations during 26.3 hr of testing aboard the KC-135 zero-gravity aircraft, based at Ellington Air force Base, Texas. Although this represented fewer hours than initially projected, all experiment and test objectives were met or exceeded. This Technical Memorandum compiles all results achieved by MSFC users during FY-82, a year considered to be highly productive.

TR-IA payload recovery system

NASA Astrophysics Data System (ADS)

Kochiyama, Jiro; Kinai, Shigeki; Morita, Shinya

The TR-IA microgravity-experimentation sounding rocket baseline configuration and recovery system are presented. Aerodynamic braking is incorporated through the requisite positioning of the reentry-body center of gravity. The recovery sequence is initiated by baroswitches, which eject the pilot chute. Even in the event of flotation bag malfunction, the structure containing the experiment is watertight. An account is given of the nature and the results of the performance tests conducted to establish the soundness of various materials and components.

Crack Initiation and Growth Behavior at Corrosion Pit in 7075-T6 Under Biaxial and Uniaxial Fatigue

DTIC Science & Technology

2014-06-19

al. examined the effect of biaxial loading on the fatigue crack growth [52]. They conducted their fatigue tests on SUS 304 stainless steel using a...specimens. Their experiments were carried out on cruciform test coupons using a digitally controlled four actuator biaxial testing system. Steel ...as shown in Figure 3.7. The test specimen was placed between two stainless steel chambers. These chambers were connected together using screws, and

The effect of cathodic polarization on the corrosion fatigue behavior of a precipitation hardened aluminum alloy

NASA Astrophysics Data System (ADS)

Smith, E. F.; Duquette, D. J.

1986-02-01

Fatigue experiments were conducted on polycrystalline and monocrystalline samples of a high purity Al, 5.5 wt pct Zn, 2.5 wt pct Mg, 1.5 wt pct Cu alloy in the peak-hardened heat treatment condition. These experiments were conducted in dry laboratory air and in 0.5 N NaCl solutions at the corrosion potential and at applied potentials cathodic to the corrosion potential. It has been shown that saline solutions severely reduce the fatigue resistance of the alloy, resulting in considerable amounts of intergranular crack initiation and propagation under freely corroding conditions for polycrystalline samples. Applied cathodic potentials resulted in still larger decreases in fatigue resistance and, for poly crystals, increases in the degree of transgranular crack initiation and propagation. Increasing amounts of intergranular cracking were observed when applied cyclic stresses were reduced (longer test times). The characteristics of cracking, combined with results obtained on tensile tests of deformed and hydrogen charged samples, suggest that environmental cracking of these alloys is associated with a form of hydrogen embrittlement of the process zones of growing cracks. Further, it is suggested that stress corrosion cracking and corrosion fatigue of these alloys occurs by essentially the same mechanism, but that the often observed transgranular cracking under cyclic loading conditions occurs due to enhanced hydrogen transport and/or concentrations associated with mobile dislocations at growing crack tips.

The correlation of in vivo and ex vivo tissue dielectric properties to validate electromagnetic breast imaging: initial clinical experience

PubMed Central

Halter, Ryan J; Zhou, Tian; Meaney, Paul M; Hartov, Alex; Barth, Richard J; Rosenkranz, Kari M; Wells, Wendy A; Kogel, Christine A; Borsic, Andrea; Rizzo, Elizabeth J; Paulsen, Keith D

2009-01-01

Electromagnetic (EM) breast imaging provides low-cost, safe and potentially a more specific modality for cancer detection than conventional imaging systems. A primary difficulty in validating these EM imaging modalities is that the true dielectric property values of the particular breast being imaged are not readily available on an individual subject basis. Here, we describe our initial experience in seeking to correlate tomographic EM imaging studies with discrete point spectroscopy measurements of the dielectric properties of breast tissue. The protocol we have developed involves measurement of in vivo tissue properties during partial and full mastectomy procedures in the operating room (OR) followed by ex vivo tissue property recordings in the same locations in the excised tissue specimens in the pathology laboratory immediately after resection. We have successfully applied all of the elements of this validation protocol in a series of six women with cancer diagnoses. Conductivity and permittivity gauged from ex vivo samples over the frequency range 100 Hz–8.5 GHz are found to be similar to those reported in the literature. A decrease in both conductivity and permittivity is observed when these properties are gauged from ex vivo samples instead of in vivo. We present these results in addition to a case study demonstrating how discrete point spectroscopy measurements of the tissue can be correlated and used to validate EM imaging studies. PMID:19491436

The ethical issues in uranium mining research in the Navajo Nation.

PubMed

Panikkar, Bindu; Brugge, Doug

2007-01-01

We explore the experience of Navajo communities living under the shadow of nuclear age fallout who were subjects of five decades of research. In this historical analysis of public health (epidemiological) research conducted in the Navajo lands since the inception of uranium mining from the 1950s untill the end of the 20th century, we analyze the successes and failures in the research initiatives conducted on Navajo lands, the ethical breaches, and the harms and benefits that this research has brought about to the community. We discuss how scientific and moral uncertainty, lack of full stakeholder participation and community wide outreach and education can impact ethical decisions made in research.

Chancellor Water Colloids: Characterization and Radionuclide Associated Transport

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reimus, Paul William; Boukhalfa, Hakim

2014-09-26

Column transport experiments were conducted in which water from the Chancellor nuclear test cavity was transported through crushed volcanic tuff from Pahute Mesa. In one experiment, the cavity water was spiked with solute 137Cs, and in another it was spiked with 239/240Pu(IV) nanocolloids. A third column experiment was conducted with no radionuclide spike at all, although the 137Cs concentrations in the water were still high enough to quantify in the column effluent. The radionuclides strongly partitioned to natural colloids present in the water, which were characterized for size distribution, mass concentration, zeta potential/surface charge, critical coagulation concentration, and qualitative mineralogy.more » In the spiked water experiments, the unanalyzed portion of the high-concentration column effluent samples were combined and re-injected into the respective columns as a second pulse. This procedure was repeated again for a third injection. Measurable filtration of the colloids was observed after each initial injection of the Chancellor water into the columns, but the subsequent injections (spiked water experiments only) exhibited no apparent filtration, suggesting that the colloids that remained mobile after relatively short transport distances were more resistant to filtration than the initial population of colloids. It was also observed that while significant desorption of 137Cs from the colloids occurred after the first injection in both the spiked and unspiked waters, subsequent injections of the spiked water exhibited much less 137Cs desorption (much greater 137Cs colloid-associated transport). This result suggests that the 137Cs that remained associated with colloids during the first injection represented a fraction that was more strongly adsorbed to the mobile colloids than the initial 137Cs associated with the colloids. A greater amount of the 239/240Pu desorbed from the colloids during the second column injection compared to the first injection, but then desorption decreased significantly in the third injection. This result suggests that the Pu(IV) nanocolloids probably at least partially dissolved during and after the first injection, resulting in enhanced desorption from the colloids during the second injection, but by the third injection the Pu started following the same trend that was observed for 137Cs. The experiments suggest a transport scale dependence in which mobile colloids and colloid-associated radionuclides observed at downstream points along a flow path have a greater tendency to remain mobile along the flow path than colloids and radionuclides observed at upstream points. This type of scale dependence may help explain observations of colloid-facilitated Pu transport over distances of up to 2 km at Pahute Mesa.« less

Older black women's experiences initiating and maintaining physical activity: implications for theory and practice.

PubMed

Price, Anna E; Greer, Beau; Tucker, Ash

2013-07-01

Using a semistructured discussion guide, the authors conducted 15 interviews with physically active older black women living in the eastern U.S. to examine what contributed to their physical activity initiation and maintenance. They used thematic analysis to organize content and constant-comparison methods to compare themes between participants. Participants initiated physical activity when a cue to action, such as weight gain or a medical issue, triggered a perceived need to exercise. When participants initiated physical activity, they experienced immediate unexpected benefits such as improved energy. They reported continuing activity because of these initial benefits. After continued physical activity over time, participants experienced the health benefits they originally hoped to achieve. Most participants also mentioned continuing physical activity because it is "me time." All participants reported needing to modify their physical activity routine at some point. Having a regular, yet adaptable, routine and planning skills helped participants maintain physical activity. These findings contribute to the refinement of theory and might be useful for professionals promoting physical activity among older black women.

Water state changes during the composting of kitchen waste.

PubMed

Shen, Dong-Sheng; Yang, Yu-Qiang; Huang, Huan-Lin; Hu, Li-Fang; Long, Yu-Yang

2015-04-01

Changes in water states during the composting of kitchen waste were determined. Three experiments, R(55), R(60), and R(65), with different initial moisture contents, 55%, 60%, and 65%, respectively, were performed. Three water states, entrapped water (EW), capillary water (CW), and multiple-molecular-layer water (MMLW), were monitored during the experiments. Changes only occurred with the EW and CW during the composting process. The percentage of EW increased, and the percentage of CW decreased as the composting process progressed. The R(60) experiment performed better than the other experiments according to changes in the temperature and carbon-to-nitrogen ratio (C/N). The percentage of EW correlated well (P<0.05) with the dissolved organic carbon content (DOC), electrical conductivity (EC), pH, and C/N, and was affected by the hemicellulose and cellulose contents. Copyright © 2015 Elsevier Ltd. All rights reserved.

Late-time mixing and turbulent behavior in high-energy-density shear experiments at high Atwood numbers

DOE PAGES

Flippo, K. A.; Doss, F. W.; Merritt, E. C.; ...

2018-05-30

The LANL Shear Campaign uses millimeter-scale initially solid shock tubes on the National Ignition Facility to conduct high-energy-density hydrodynamic plasma experiments, capable of reaching energy densities exceeding 100 kJ/cm 3. These shock-tube experiments have for the first time reproduced spontaneously emergent coherent structures due to shear-based fluid instabilities [i.e., Kelvin-Helmholtz (KH)], demonstrating hydrodynamic scaling over 8 orders of magnitude in time and velocity. The KH vortices, referred to as “rollers,” and the secondary instabilities, referred to as “ribs,” are used to understand the turbulent kinetic energy contained in the system. Their evolution is used to understand the transition to turbulencemore » and that transition's dependence on initial conditions. Experimental results from these studies are well modeled by the RAGE (Radiation Adaptive Grid Eulerian) hydro-code using the Besnard-Harlow-Rauenzahn turbulent mix model. Information inferred from both the experimental data and the mix model allows us to demonstrate that the specific Turbulent Kinetic Energy (sTKE) in the layer, as calculated from the plan-view structure data, is consistent with the mixing width growth and the RAGE simulations of sTKE.« less

Late-time mixing and turbulent behavior in high-energy-density shear experiments at high Atwood numbers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Flippo, K. A.; Doss, F. W.; Merritt, E. C.

The LANL Shear Campaign uses millimeter-scale initially solid shock tubes on the National Ignition Facility to conduct high-energy-density hydrodynamic plasma experiments, capable of reaching energy densities exceeding 100 kJ/cm 3. These shock-tube experiments have for the first time reproduced spontaneously emergent coherent structures due to shear-based fluid instabilities [i.e., Kelvin-Helmholtz (KH)], demonstrating hydrodynamic scaling over 8 orders of magnitude in time and velocity. The KH vortices, referred to as “rollers,” and the secondary instabilities, referred to as “ribs,” are used to understand the turbulent kinetic energy contained in the system. Their evolution is used to understand the transition to turbulencemore » and that transition's dependence on initial conditions. Experimental results from these studies are well modeled by the RAGE (Radiation Adaptive Grid Eulerian) hydro-code using the Besnard-Harlow-Rauenzahn turbulent mix model. Information inferred from both the experimental data and the mix model allows us to demonstrate that the specific Turbulent Kinetic Energy (sTKE) in the layer, as calculated from the plan-view structure data, is consistent with the mixing width growth and the RAGE simulations of sTKE.« less

Microgravity Effects on the Early Events of Biological Nitrogen Fixation in Medicago Truncatula: Results from the SyNRGE Experiment

NASA Astrophysics Data System (ADS)

Stutte, Gary W.; Roberts, Michael S.

2013-02-01

SyNRGE (Symbiotic Nodulation in a Reduced Gravity Environment) was a sortie mission on STS-135 in the Biological Research in Canisters (BRIC) hardware to study the effect of μg on a plant-microbe symbiosis resulting in biological nitrogen fixation. Medicago truncatula, a model species for the legume family, was inoculated with its bacterial symbiont, Sinorhizobium meliloti, to observe early biomolecular events associated with infection and nodulation in Petri Dish Fixation Units (PDFU’s). Two sets of experiments were conducted in orbit and in 24-hour delayed ground controls. Experiments were designed to determine if S. meliloti would infect M. truncatula and initiate biomolecular changes associated with nodule formation and if the μg environment altered the host plant and/or bacteria to induce nodule formation upon return to 1g. Initial analysis results demonstrate that the legumes and bacteria cultivated in μg have potential to develop a symbiotic interaction, but suggest that μg alters their ability to form nodules upon return to 1g. (Research supported by NASA ESMD/ Advance Capabilities Division grant NNX10AR09A)

The Impact of Course Title and Instructor Gender on Student Perceptions and Interest in a Women's and Gender Studies Course

PubMed Central

Spoor, Jennifer R.; Lehmiller, Justin J.

2014-01-01

Diversity awareness has enormous benefits, and universities in the United States increasingly require students to complete diversity-related courses. Prior research has demonstrated that students' initial attitudes toward these courses affect their subsequent engagement, as well as the quality of their learning experience; however, very little research has examined how these initial attitudes are formed. We conducted an experiment to examine this issue in the context of a women's and gender studies course in psychology. Participants read one of two identical course descriptions that varied only the course title (i.e., Psychology of Gender versus Psychology of Women) and instructor gender. Participants perceived a women-titled course to be narrowly focused compared to an identical gender-titled course and were more interested in taking the gender-titled course. Instructor gender had no effects on any of the variables. Additionally, female participants had more positive attitudes toward the course than male participants, regardless of title. Exploratory mediation analyses indicated that the main effects of course title and participant gender were mediated by perceptions of course content. Implications for improving student experiences and interest in diversity-related courses are discussed. PMID:25268353

The impact of course title and instructor gender on student perceptions and interest in a women's and gender studies course.

PubMed

Spoor, Jennifer R; Lehmiller, Justin J

2014-01-01

Diversity awareness has enormous benefits, and universities in the United States increasingly require students to complete diversity-related courses. Prior research has demonstrated that students' initial attitudes toward these courses affect their subsequent engagement, as well as the quality of their learning experience; however, very little research has examined how these initial attitudes are formed. We conducted an experiment to examine this issue in the context of a women's and gender studies course in psychology. Participants read one of two identical course descriptions that varied only the course title (i.e., Psychology of Gender versus Psychology of Women) and instructor gender. Participants perceived a women-titled course to be narrowly focused compared to an identical gender-titled course and were more interested in taking the gender-titled course. Instructor gender had no effects on any of the variables. Additionally, female participants had more positive attitudes toward the course than male participants, regardless of title. Exploratory mediation analyses indicated that the main effects of course title and participant gender were mediated by perceptions of course content. Implications for improving student experiences and interest in diversity-related courses are discussed.

The Effect of Initial Irrigation Conditions on Heap Leaching Efficiency

NASA Astrophysics Data System (ADS)

Briseño Arellano, A. D.; Milczarek, M.; Yao, M.; Brusseau, M. L. L.

2017-12-01

Heap leaching is an unsaturated flow metal recovery process, in which mined ore is irrigated with a lixiviant to dissolve metal contained in the ore. The metal is then extracted from solution. Large scale operations involve stacking ore to depths of 6 to 18 meters on pads that may be hundreds of hectares in area. Heterogeneities within the stacked ore can lead to uneven wetting and the formation of preferential flow pathways, which reduces solution contact and lowers metal recovery. Furthermore, mineral dissolution can cause alteration of the porous media structure and loss of ore permeability. Many mine operators believe that slow initial irrigation rates help minimize permeability loss and increase metal recovery rates. However, this phenomenon has not been studied in detail. Experiments were conducted to investigate the effect of varying initial irrigation rates on leach ore stability. These were conducted with large columns (1.5 m high, 0.5 m in diameter) packed with crushed ore samples that are known to have permeability constraints. The columns were highly instrumented to assess potential changes in material properties both spatially and temporally. Water content was measured with three different methods: capacitance soil moisture sensors placed at 20-cm intervals; a neutron probe to periodically log every 30 cm from four different directions; and electrical resistivity sensors to create a 2-dimensional tomography profile of water content over time. Tensiometers were paired with the soil moisture sensors to measure matric suction and characterize moisture retention characteristics. A non-reactive tracer was used to characterize advective-dispersive transport under unsaturated conditions. A dye solution was introduced at the end of each experiment to map preferential pathways. Continuous monitoring of settling at the surface assisted in measuring consolidation and loss in permeability.

Development of an Integrated Nozzle for a Symmetric, RBCC Launch Vehicle Configuration

NASA Technical Reports Server (NTRS)

Smith, Timothy D.; Canabal, Francisco, III; Rice, Tharen; Blaha, Bernard

2000-01-01

The development of rocket based combined cycle (RBCC) engines is highly dependent upon integrating several different modes of operation into a single system. One of the key components to develop acceptable performance levels through each mode of operation is the nozzle. It must be highly integrated to serve the expansion processes of both rocket and air-breathing modes without undue weight, drag, or complexity. The NASA GTX configuration requires a fixed geometry, altitude-compensating nozzle configuration. The initial configuration, used mainly to estimate weight and cooling requirements was a 1 So half-angle cone, which cuts a concave surface from a point within the flowpath to the vehicle trailing edge. Results of 3-D CFD calculations on this geometry are presented. To address the critical issues associated with integrated, fixed geometry, multimode nozzle development, the GTX team has initiated a series of tasks to evolve the nozzle design, and validate performance levels. An overview of these tasks is given. The first element is a design activity to develop tools for integration of efficient expansion surfaces With the existing flowpath and vehicle aft-body, and to develop a second-generation nozzle design. A preliminary result using a "streamline-tracing" technique is presented. As the nozzle design evolves, a combination of 3-D CFD analysis and experimental evaluation will be used to validate the design procedure and determine the installed performance for propulsion cycle modeling. The initial experimental effort will consist of cold-flow experiments designed to validate the general trends of the streamline-tracing methodology and anchor the CFD analysis. Experiments will also be conducted to simulate nozzle performance during each mode of operation. As the design matures, hot-fire tests will be conducted to refine performance estimates and anchor more sophisticated reacting-flow analysis.

Under the (legal) radar screen: global health initiatives and international human rights obligations.

PubMed

Hammonds, Rachel; Ooms, Gorik; Vandenhole, Wouter

2012-11-15

Given that many low income countries are heavily reliant on external assistance to fund their health sectors the acceptance of obligations of international assistance and cooperation with regard to the right to health (global health obligations) is insufficiently understood and studied by international health and human rights scholars. Over the past decade Global Health Initiatives, like the Global Fund to fight AIDS, Tuberculosis and Malaria (Global Fund) have adopted novel approaches to engaging with stakeholders in high and low income countries. This article explores how this experience impacted on acceptance of the international obligation to (help) fulfil the right to health beyond borders. The authors conducted an extensive review of international human rights law literature, transnational legal process literature, global public health literature and grey literature pertaining to Global Health Initiatives. To complement this desk work and deepen their understanding of how and why different legal norms evolve the authors conducted 19 in-depth key informant interviews with actors engaged with three stakeholders; the European Union, the United States and Belgium. The authors then analysed the interviews through a transnational legal process lens. Through according value to the process of examining how and why different legal norms evolve transnational legal process offers us a tool for engaging with the dynamism of developments in global health suggesting that operationalising global health obligations could advance the right to health for all. In many low-income countries the health sector is heavily dependent on external assistance to fulfil the right to health of people thus it is vital that policies and tools for delivering reliable, long-term assistance are developed so that the right to health for all becomes more than a dream. Our research suggests that the Global Fund experience offers lessons to build on.

Pretest Caluculations of Temperature Changes for Field Thermal Conductivity Tests

DOE Office of Scientific and Technical Information (OSTI.GOV)

N.S. Brodsky

A large volume fraction of the potential monitored geologic repository at Yucca Mountain may reside in the Tptpll (Tertiary, Paintbrush Group, Topopah Spring Tuff, crystal poor, lower lithophysal) lithostratigraphic unit. This unit is characterized by voids, or lithophysae, which range in size from centimeters to meters. A series of thermal conductivity field tests are planned in the Enhanced Characterization of the Repository Block (ECRB) Cross Drift. The objective of the pretest calculation described in this document is to predict changes in temperatures in the surrounding rock for these tests for a given heater power and a set of thermal transportmore » properties. The calculation can be extended, as described in this document, to obtain thermal conductivity, thermal capacitance (density x heat capacity, J {center_dot} m{sup -3} {center_dot} K{sup -1}), and thermal diffusivity from the field data. The work has been conducted under the ''Technical Work Plan For: Testing and Monitoring'' (BSC 2001). One of the outcomes of this analysis is to determine the initial output of the heater. This heater output must be sufficiently high that it will provide results in a reasonably short period of time (within several weeks or a month) and be sufficiently high that the heat increase is detectable by the instruments employed in the test. The test will be conducted in stages and heater output will be step increased as the test progresses. If the initial temperature is set too high, the experiment will not have as many steps and thus fewer thermal conductivity data points will result.« less

Standardized ileal digestible valine:lysine dose response effects in 25- to 45-kg pigs under commercial conditions.

PubMed

Gonçalves, Marcio A D; Tokach, Mike D; Dritz, Steve S; Bello, Nora M; Touchette, Kevin J; Goodband, Robert D; DeRouchey, Joel M; Woodworth, Jason C

2018-03-06

Two experiments were conducted to estimate the standardized ileal digestible valine:lysine (SID Val:Lys) dose response effects in 25- to 45-kg pigs under commercial conditions. In experiment 1, a total of 1,134 gilts (PIC 337 × 1050), initially 31.2 kg ± 2.0 kg body weight (BW; mean ± SD) were used in a 19-d growth trial with 27 pigs per pen and seven pens per treatment. In experiment 2, a total of 2,100 gilts (PIC 327 × 1050), initially 25.4 ± 1.9 kg BW were used in a 22-d growth trial with 25 pigs per pen and 12 pens per treatment. Treatments were blocked by initial BW in a randomized complete block design. In experiment 1, there were a total of six dietary treatments with SID Val at 59.0, 62.5, 65.9, 69.6, 73.0, and 75.5% of Lys and for experiment 2 there were a total of seven dietary treatments with SID Val at 57.0, 60.6, 63.9, 67.5, 71.1, 74.4, and 78.0% of Lys. Experimental diets were formulated to ensure that Lys was the second limiting amino acid throughout the experiments. Initially, linear mixed models were fitted to data from each experiment. Then, data from the two experiments were combined to estimate dose-responses using a broken-line linear ascending (BLL) model, broken-line quadratic ascending (BLQ) model, or quadratic polynomial (QP). Model fit was compared using Bayesian information criterion (BIC). In experiment 1, ADG increased linearly (P = 0.009) with increasing SID Val:Lys with no apparent significant impact on G:F. In experiment 2, ADG and ADFI increased in a quadratic manner (P < 0.002) with increasing SID Val:Lys whereas G:F increased linearly (P < 0.001). Overall, the best-fitting model for ADG was a QP, whereby the maximum mean ADG was estimated at a 73.0% (95% CI: [69.5, >78.0%]) SID Val:Lys. For G:F, the overall best-fitting model was a QP with maximum estimated mean G:F at 69.0% (95% CI: [64.0, >78.0]) SID Val:Lys ratio. However, 99% of the maximum mean performance for ADG and G:F were achieved at, 68% and 63% SID Val:Lys ratio, respectively. Therefore, the SID Val:Lys requirement ranged from73.0% for maximum ADG to 63.2% SID Val:Lys to achieve 99% of maximum G:F in 25- to 45-kg BW pigs.

Compressive behavior of fine sand.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martin, Bradley E.; Kabir, Md. E.; Song, Bo

2010-04-01

The compressive mechanical response of fine sand is experimentally investigated. The strain rate, initial density, stress state, and moisture level are systematically varied. A Kolsky bar was modified to obtain uniaxial and triaxial compressive response at high strain rates. A controlled loading pulse allows the specimen to acquire stress equilibrium and constant strain-rates. The results show that the compressive response of the fine sand is not sensitive to strain rate under the loading conditions in this study, but significantly dependent on the moisture content, initial density and lateral confinement. Partially saturated sand is more compliant than dry sand. Similar trendsmore » were reported in the quasi-static regime for experiments conducted at comparable specimen conditions. The sand becomes stiffer as initial density and/or confinement pressure increases. The sand particle size become smaller after hydrostatic pressure and further smaller after dynamic axial loading.« less

Plasma chemical conversion of sulphur hexafluoride initiated by a pulsed electron beam

NASA Astrophysics Data System (ADS)

Kholodnaya, Galina; Sazonov, Roman; Ponomarev, Denis; Guzeeva, Tatiana

2017-01-01

This paper presents the results of the experimental investigation of plasma chemical conversion of sulphur hexafluoride initiated by a pulsed electron beam (TEA-500 pulsed electron accelerator) with the following characteristics: 400-450 keV electron energy, 60 ns pulse duration, up to 200 J pulse energy, and 5 cm beam diameter. Experiments were conducted on the effect of the pulsed electron beam on SF6 and on mixtures of SF6 with O2, Ar, or N2. For the mixture of SF6 and oxygen, the results indicated chemical reactions involving the formation of a number of products of which one is sulphur, confirming the Wray - Fluorescence Analysis. The plasma chemical conversion of SF6 initiated by the pulsed electron beam was not detected when SF6 was mixed with Ar or N2, suggesting a possible mechanism for the reaction of SF6 in the presence of O2.

Test of LOX compatibility for asphalt and concrete runway materials

NASA Technical Reports Server (NTRS)

Moyers, C. V.; Bryan, C. J.; Lockhart, B. J.

1973-01-01

A literature survey and a telephone canvass of producers and users of LOX is reported which yielded one report of an accident resulting from a LOX spill on asphalt, one discussion of hazardous conditions, and an unreferenced mention of an incident. Laboratory tests using standard LOX impact apparatus yielded reactions with both old and new alphalt, but none with concrete. In the final test, using a larger sample of asphalt, the reaction caused extensive damage to equipment. Initial field experiments using 2-meter square asphalt slabs covered with LOX, conducted during rainy weather, achieved no reaction with plummets, and limited reaction with a blasting cap as a reaction initiator. In a final plummet-initiated test on a dry slab, a violent reaction, which appeared to have propagated over the entire slab surface, destroyed the plummet fixture and threw fragments as far as 48 meters.

Effect of pathogen concentrations on removal of Cryptosporidium and Giardia by conventional drinking water treatment.

PubMed

Assavasilavasukul, Prapakorn; Lau, Boris L T; Harrington, Gregory W; Hoffman, Rebecca M; Borchardt, Mark A

2008-05-01

The presence of waterborne enteric pathogens in municipal water supplies contributes risk to public health. To evaluate the removal of these pathogens in drinking water treatment processes, previous researchers have spiked raw waters with up to 10(6) pathogens/L in order to reliably detect the pathogens in treated water. These spike doses are 6-8 orders of magnitude higher than pathogen concentrations routinely observed in practice. In the present study, experiments were conducted with different sampling methods (i.e., grab versus continuous sampling) and initial pathogen concentrations ranging from 10(1) to 10(6) pathogens/L. Results showed that Cryptosporidium oocyst and Giardia cyst removal across conventional treatment were dependent on initial pathogen concentrations, with lower pathogen removals observed when lower initial pathogen spike doses were used. In addition, higher raw water turbidity appeared to result in higher log removal for both Cryptosporidium oocysts and Giardia cysts.

Quantifying microbe-mineral interactions leading to remotely detectable induced polarization signals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ntarlagiannis, Dimitrios; Moysey, Stephen; Dean, Delphine

2013-11-14

The objective of this project was to investigate controls on induced polarization responses in porous media. The approach taken in the project was to compare electrical measurements made on mineral surfaces with atomic force microscopy (AFM) techniques to observations made at the column-scale using traditional spectral induced polarization measurements. In the project we evaluated a number of techniques for investigating the surface properties of materials, including the development of a new AFM measurement protocol that utilizes an external electric field to induce grain-scale polarizations that can be probed using a charged AFM tip. The experiments we performed focused on idealizedmore » systems (i.e., glass beads and silica gel) where we could obtain the high degree of control needed to understand how changes in the pore environment, which are determined by biogeochemical controls in the subsurface, affect mechanisms contributing to complex electrical conductivity, i.e., conduction and polarization, responses. The studies we performed can be classified into those affecting the chemical versus physical properties of the grain surface and pore space. Chemical alterations of the surface focused on evaluating how changes in pore fluid pH and ionic composition control surface conduction. These were performed as column flow through experiments where the pore fluid was exchanged in a column of silica gel. Given that silica gel has a high surface area due to internal grain porosity, high-quality data could be obtained where the chemical influences on the surface are clearly apparent and qualitatively consistent with theories of grain (i.e., Stern layer) polarization controlled by electrostatic surface sorption processes (i.e., triple layer theory). Quantitative fitting of the results by existing process-based polarization models (e.g., Leroy et al., 2008) has been less successful, however, due to what we have attributed to differences between existing models developed for spherical grains versus the actual geometry associated with the nano-pores in the silica gel, though other polarization processes, e.g., proton hopping along the surface (Skold et al., 2013), may also be a contributing factor. As an alternative model-independent approach to confirming the link between surface sorption and SIP we initiated a study that will continue (unfunded) beyond the completion of this project to independently measure the accumulation of gamma emitting isotopes on the silica gel during the SIP monitoring experiments. Though our analyses of the project data are ongoing, our preliminary analyses are generally supportive of the grain (Stern layer) polarization theory of SIP. Experiments focused on evaluating the impact of physical modifications of the medium on polarization included etching and biotic and abiotic facilitated precipitation of carbonate and iron oxides to alter the roughness and electrical conductivity of the surfaces. These experiments were performed for both silica gel and glass beads, the latter of which lacked the interior porosity and high surface area of the silica gel. The results appear to be more nuanced that the chemical modifications of the system. In general, however, it was found that deposition of iron oxides and etching had relatively minimal or negative impacts on the polarization response of the medium, whereas carbonate coatings increased the polarization response. These results were generally consistent with changes in surface charge observed via AFM. Abiotic and biotic column flow through experiments demonstrated that precipitation of carbonate within the medium significantly impacted the real and imaginary conductivity over time in a manner generally consistent with the carbonate precipitation as observed from the batch grain coating experiments. Biotic effects were not observed to provide distinctly different signatures, but may have contributed to differences in the rate of changes observed with SIP. AFM was used in a variety of different ways to investigate the grain surfaces throughout the course of the project. Standard imaging methods were used to evaluate surface roughness and charge density, which showed that these data could provide qualitative insights about consistency between surface trends and the electrical behavior at the column scale (for the case of glass beads). Polarization and conductive force microscopy (PCFM) measurements were developed by the original project PI (Treavor Kendall), which illustrated the importance of the initial few monolayers of water on the mineral surface for producing surface conductivity. The technique allowed for initial local estimates of complex electrical conductivity on mineral surfaces, but could not be pursued after Kendall left the project due to phase locking limitations with the AFM instrument at Clemson and an inability to perform measurements in solution, which limited their value for linking the measurements to column-scale SIP responses. As a result, co-PI Dean developed a new methodology for making AFM measurements within an externally applied electric field. In this method, the charged tip of an AFM probe is brought within the proximity of a polarization domain while an external electric field is applied to the sample. The premise of the approach is that the tip will be attracted to or rebound from charge accumulations on the surface, which allow for detection of the local polarization response. Initial experiments showed promise in terms of the general trends of responses observed, though we have not yet been able to develop a quantitative interpretation technique that can be applied to predicting column scale responses.« less

Quantifying Microbe-Mineral Interactions Leading to Remotely Detectable Induced Polarization Signals (Final Project Report)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moysey, Stephen; Dean, Delphine; Dimitrios, Ntarlagiannis

2013-11-13

The objective of this project was to investigate controls on induced polarization responses in porous media. The approach taken in the project was to compare electrical measurements made on mineral surfaces with atomic force microscopy (AFM) techniques to observations made at the column-scale using traditional spectral induced polarization measurements. In the project we evaluated a number of techniques for investigating the surface properties of materials, including the development of a new AFM measurement protocol that utilizes an external electric field to induce grain-scale polarizations that can be probed using a charged AFM tip. The experiments we performed focused on idealizedmore » systems (i.e., glass beads and silica gel) where we could obtain the high degree of control needed to understand how changes in the pore environment, which are determined by biogeochemical controls in the subsurface, affect mechanisms contributing to complex electrical conductivity, i.e., conduction and polarization, responses. The studies we performed can be classified into those affecting the chemical versus physical properties of the grain surface and pore space. Chemical alterations of the surface focused on evaluating how changes in pore fluid pH and ionic composition control surface conduction. These were performed as column flow through experiments where the pore fluid was exchanged in a column of silica gel. Given that silica gel has a high surface area due to internal grain porosity, high-quality data could be obtained where the chemical influences on the surface are clearly apparent and qualitatively consistent with theories of grain (i.e., Stern layer) polarization controlled by electrostatic surface sorption processes (i.e., triple layer theory). Quantitative fitting of the results by existing process-based polarization models (e.g., Leroy et al., 2008) has been less successful, however, due to what we have attributed to differences between existing models developed for spherical grains versus the actual geometry associated with the nano-pores in the silica gel, though other polarization processes, e.g., proton hopping along the surface (Skold et al., 2013), may also be a contributing factor. As an alternative model-independent approach to confirming the link between surface sorption and SIP we initiated a study that will continue (unfunded) beyond the completion of this project to independently measure the accumulation of gamma emitting isotopes on the silica gel during the SIP monitoring experiments. Though our analyses of the project data are ongoing, our preliminary analyses are generally supportive of the grain (Stern layer) polarization theory of SIP. Experiments focused on evaluating the impact of physical modifications of the medium on polarization included etching and biotic and abiotic facilitated precipitation of carbonate and iron oxides to alter the roughness and electrical conductivity of the surfaces. These experiments were performed for both silica gel and glass beads, the latter of which lacked the interior porosity and high surface area of the silica gel. The results appear to be more nuanced that the chemical modifications of the system. In general, however, it was found that deposition of iron oxides and etching had relatively minimal or negative impacts on the polarization response of the medium, whereas carbonate coatings increased the polarization response. These results were generally consistent with changes in surface charge observed via AFM. Abiotic and biotic column flow through experiments demonstrated that precipitation of carbonate within the medium significantly impacted the real and imaginary conductivity over time in a manner generally consistent with the carbonate precipitation as observed from the batch grain coating experiments. Biotic effects were not observed to provide distinctly different signatures, but may have contributed to differences in the rate of changes observed with SIP. AFM was used in a variety of different ways to investigate the grain surfaces throughout the course of the project. Standard imaging methods were used to evaluate surface roughness and charge density, which showed that these data could provide qualitative insights about consistency between surface trends and the electrical behavior at the column scale (for the case of glass beads). Polarization and conductive force microscopy (PCFM) measurements were developed by the original project PI (Treavor Kendall), which illustrated the importance of the initial few monolayers of water on the mineral surface for producing surface conductivity. The technique allowed for initial local estimates of complex electrical conductivity on mineral surfaces, but could not be pursued after Kendall left the project due to phase locking limitations with the AFM instrument at Clemson and an inability to perform measurements in solution, which limited their value for linking the measurements to column-scale SIP responses. As a result, co-PI Dean developed a new methodology for making AFM measurements within an externally applied electric field. In this method, the charged tip of an AFM probe is brought within the proximity of a polarization domain while an external electric field is applied to the sample. The premise of the approach is that the tip will be attracted to or rebound from charge accumulations on the surface, which allow for detection of the local polarization response. Initial experiments showed promise in terms of the general trends of responses observed, though we have not yet been able to develop a quantitative interpretation technique that can be applied to predicting column scale responses.« less

Experimental Investigation of InSight HP3 Mole Interaction with Martian Regolith Simulant. Quasi-Static and Dynamic Penetration Testing

NASA Astrophysics Data System (ADS)

Marshall, Jason P.; Hudson, Troy L.; Andrade, José E.

2017-10-01

The InSight mission launches in 2018 to characterize several geophysical quantities on Mars, including the heat flow from the planetary interior. This quantity will be calculated by utilizing measurements of the thermal conductivity and the thermal gradient down to 5 meters below the Martian surface. One of the components of InSight is the Mole, which hammers into the Martian regolith to facilitate these thermal property measurements. In this paper, we experimentally investigated the effect of the Mole's penetrating action on regolith compaction and mechanical properties. Quasi-static and dynamic experiments were run with a 2D model of the 3D cylindrical mole. Force resistance data was captured with load cells. Deformation information was captured in images and analyzed using Digitial Image Correlation (DIC). Additionally, we used existing approximations of Martian regolith thermal conductivity to estimate the change in the surrounding granular material's thermal conductivity due to the Mole's penetration. We found that the Mole has the potential to cause a high degree of densification, especially if the initial granular material is relatively loose. The effect on the thermal conductivity from this densification was found to be relatively small in first-order calculations though more complete thermal models incorporating this densification should be a subject of further investigation. The results obtained provide an initial estimate of the Mole's impact on Martian regolith thermal properties.

Challenges in conducting qualitative research in health: A conceptual paper

PubMed Central

Khankeh, Hamidreza; Ranjbar, Maryam; Khorasani-Zavareh, Davoud; Zargham-Boroujeni, Ali; Johansson, Eva

2015-01-01

Background: Qualitative research focuses on social world and provides the tools to study health phenomena from the perspective of those experiencing them. Identifying the problem, forming the question, and selecting an appropriate methodology and design are some of the initial challenges that researchers encounter in the early stages of any research project. These problems are particularly common for novices. Materials and Methods: This article describes the practical challenges of using qualitative inquiry in the field of health and the challenges of performing an interpretive research based on professional experience as a qualitative researcher and on available literature. Results: One of the main topics discussed is the nature of qualitative research, its inherent challenges, and how to overcome them. Some of those highlighted here include: identification of the research problem, formation of the research question/aim, and selecting an appropriate methodology and research design, which are the main concerns of qualitative researchers and need to be handled properly. Insights from real-life experiences in conducting qualitative research in health reveal these issues. Conclusions: The paper provides personal comments on the experiences of a researcher in conducting pure qualitative research in the field of health. It offers insights into the practical difficulties encountered when performing qualitative studies and offers solutions and alternatives applied by these authors, which may be of use to others. PMID:26793245

Pediatric acute gastroenteritis: understanding caregivers' experiences and information needs.

PubMed

Albrecht, Lauren; Hartling, Lisa; Scott, Shannon D

2017-05-01

Pediatric acute gastroenteritis (AGE) is a common condition with high health care utilization, persistent practice variation, and substantial family burden. An initial approach to resolve these issues is to understand the patient/caregiver experience of this illness. The objective of this study was to describe caregivers' experiences of pediatric AGE and identify their information needs, preferences, and priorities. A qualitative, descriptive study was conducted. Caregivers of a child with AGE were recruited for this study in the pediatric emergency department (ED) at a tertiary hospital in a major urban centre. Individual interviews were conducted (n=15), and a thematic analysis of interview transcripts was completed using a hybrid inductive/deductive approach. Five major themes were identified and described: 1) caregiver management strategies; 2) reasons for going to the ED; 3) treatment and management of AGE in the ED; 4) caregivers' information needs; and 5) additional factors influencing caregivers' experiences and decision-making. A number of subthemes within each major theme were identified and described. This qualitative descriptive study has identified caregiver information needs, preferences, and priorities regarding pediatric AGE. This study also identified inconsistencies in the treatment and management of pediatric AGE at home and in the ED that influence health care utilization and patient outcomes related to pediatric AGE.

Motion of Air Bubbles in Water Subjected to Microgravity Accelerations

NASA Technical Reports Server (NTRS)

DeLombard, Richard; Kelly, Eric M.; Hrovat, Kenneth; Nelson, Emily S.; Pettit, Donald R.

2006-01-01

The International Space Station (ISS) serves as a platform for microgravity research for the foreseeable future. A microgravity environment is one in which the effects of gravity are drastically reduced which then allows physical experiments to be conducted without the over powering effects of gravity. During his 6-month stay on the ISS, astronaut Donald R. Pettit performed many informal/impromptu science experiments with available equipment. One such experiment focused on the motion of air bubbles in a rectangular container nearly filled with de-ionized water. Bubbles were introduced by shaking and then the container was secured in place for several hours while motion of the bubbles was recorded using time-lapse photography. This paper shows correlation between bubble motion and quasi-steady acceleration levels during one such experiment operation. The quasi-steady acceleration vectors were measured by the Microgravity Acceleration Measurement System (MAMS). Essentially linear motion was observed in the condition considered here. Dr. Pettit also created other conditions which produced linear and circulating motion, which are the subjects of further study. Initial observations of this bubble motion agree with calculations from many microgravity physical science experiments conducted on shuttle microgravity science missions. Many crystal-growth furnaces involve heavy metals and high temperatures in which undesired acceleration-driven convection during solidification can adversely affect the crystal. Presented in this paper will be results showing correlation between bubble motion and the quasi-steady acceleration vector.

The status of paediatric medicines initiatives around the world--What has happened and what has not?

PubMed

Hoppu, Kalle; Anabwani, Gabriel; Garcia-Bournissen, Facundo; Gazarian, Madlen; Kearns, Gregory L; Nakamura, Hidefumi; Peterson, Robert G; Sri Ranganathan, Shalini; de Wildt, Saskia N

2012-01-01

This review was conducted to examine the current status of paediatric medicines initiatives across the globe. The authors made a non-systematic descriptive review of current world situation. Two regions, the United States (US) and the European Union (EU), and the World Health Organization (WHO) have introduced strong paediatric initiatives to improve children's health through improving access to better paediatric medicines. The experience from the US initiative indicates that it is possible to stimulate development and study of paediatric medicines and provide important new information for improvement of paediatric therapy. The early results from the EU initiative are similarly encouraging. In Canada, Japan, Australia and other developed countries, specific paediatric medicines initiatives have been less extensive and weaker, with modest results. Disappointingly, current evidence suggests that results from clinical trials outside the US often do not benefit children in the country in which the trials were largely conducted. Pharmaceutical companies that have derived a financial benefit commensurate with the cost of doing the paediatric trials in one country do not seem to be making the results of these trials available to all countries if there is no financial incentive to the company. The WHO campaign 'make medicines child size' has produced substantive accomplishments in building improved foundations to improve mechanisms that will enhance children's access to critical medicines in resource-limited settings. However, practically all of this work has been performed using an amalgamation of short-term funding from a variety of sources as opposed to a sustained, programmatic commitment. Although much still needs to be done, it's clear that with concerted efforts and appropriate resources, change is possible but slow. Retaining and fostering public and political interest in paediatric medicines is challenging, but pivotal for success.

Physical phenomena in containerless glass processing

NASA Technical Reports Server (NTRS)

Subramanian, R. S.; Cole, R.; Annamalai, P.; Jayaraj, K.; Kondos, P.; Mcneil, T. J.; Shankar, N.

1982-01-01

Experiments were conducted on bubble migration in rotating liquid bodies contained in a sphere. Experiments were initiated on the migration of a drop in a slightly less dense continuous phase contained in a rotating sphere. A refined apparatus for the study of thermocapillar flow in a glass melt was built, and data were acquired on surface velocities in the melt. Similar data also were obtained from an ambient temperature fluid model. The data were analyzed and correlated with the aid of theory. Data were obtained on flow velocities in a pendant drop heated from above. The motion in this system was driven principally by thermocapillarity. An apparatus was designed for the study of volatilization from a glass melt.

A Model Designed to Enhance Informed Consent: Experiences From the HIV Prevention Trials Network

PubMed Central

Woodsong, Cynthia; Karim, Quarraisha Abdool

2005-01-01

HIV prevention research in developing countries has resulted in increased attention to and discussion of ethical issues, particularly the issue of the quality of informed consent. We present a conceptual framework for an enhanced informed consent process, drawing on experiences garnered from domestic and international studies conducted by the HIV Prevention Trials Network, funded by the National Institutes of Health. This framework guides the development of an informed consent process designed to help ensure initial and continued comprehension of research participation, with an emphasis on HIV prevention research. Attention is focused at the individual and community levels and on 3 study phases: preenrollment, enrollment, and postenrollment. PMID:15727968

OECD MMCI 2-D Core Concrete Interaction (CCI) tests : CCCI-1 test data report-thermalhydraulic results. Rev 0 January 31, 2004.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farmer, M. T.; Lomperski, S.; Aeschlimann, R. W.

The Melt Attack and Coolability Experiments (MACE) program addressed the issue of the ability of water to cool and thermally stabilize a molten core-concrete interaction when the reactants are flooded from above. These tests provided data regarding the nature of corium interactions with concrete, the heat transfer rates from the melt to the overlying water pool, and the role of noncondensable gases in the mixing processes that contribute to melt quenching. As a follow-on program to MACE, The Melt Coolability and Concrete Interaction Experiments (MCCI) project is conducting reactor material experiments and associated analysis to achieve the following objectives: (1)more » resolve the ex-vessel debris coolability issue through a program that focuses on providing both confirmatory evidence and test data for the coolability mechanisms identified in MACE integral effects tests, and (2) address remaining uncertainties related to long-term two-dimensional molten coreconcrete interactions under both wet and dry cavity conditions. Achievement of these two program objectives will demonstrate the efficacy of severe accident management guidelines for existing plants, and provide the technical basis for better containment designs for future plants. In terms of satisfying these objectives, the Management Board (MB) approved the conduct of two long-term 2-D Core-Concrete Interaction (CCI) experiments designed to provide information in several areas, including: (i) lateral vs. axial power split during dry core-concrete interaction, (ii) integral debris coolability data following late phase flooding, and (iii) data regarding the nature and extent of the cooling transient following breach of the crust formed at the melt-water interface. This data report provides thermal hydraulic test results from the CCI-1 experiment, which was conducted on December 19, 2003. Test specifications for CCI-1 are provided in Table 1-1. This experiment investigated the interaction of a fully oxidized 400 kg PWR core melt, initially containing 8 wt % calcined siliceous concrete, with a specially designed two-dimensional siliceous concrete test section with an initial cross-sectional area of 50 cm x 50 cm. The report begins by providing a summary description of the CCI-1 test apparatus and operating procedures, followed by presentation of the thermal-hydraulic results. The posttest debris examination results will be provided in a subsequent publication. Observations drawn within this report regarding the overall cavity erosion behavior may be subject to revision once the posttest examinations are completed, since these examinations will fully reveal the final cavity shape.« less

OECD MCCI 2-D Core Concrete Interaction (CCI) tests : CCI-2 test data report-thermalhydraulic results, Rev. 0 October 15, 2004.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farmer, M. T.; Lomperski, S.; Kilsdonk, D. J.

The Melt Attack and Coolability Experiments (MACE) program addressed the issue of the ability of water to cool and thermally stabilize a molten core-concrete interaction when the reactants are flooded from above. These tests provided data regarding the nature of corium interactions with concrete, the heat transfer rates from the melt to the overlying water pool, and the role of noncondensable gases in the mixing processes that contribute to melt quenching. As a follow-on program to MACE, The Melt Coolability and Concrete Interaction Experiments (MCCI) project is conducting reactor material experiments and associated analysis to achieve the following objectives: (1)more » resolve the ex-vessel debris coolability issue through a program that focuses on providing both confirmatory evidence and test data for the coolability mechanisms identified in MACE integral effects tests, and (2) address remaining uncertainties related to long-term two-dimensional molten core-concrete interactions under both wet and dry cavity conditions. Achievement of these two program objectives will demonstrate the efficacy of severe accident management guidelines for existing plants, and provide the technical basis for better containment designs for future plants. In terms of satisfying these objectives, the Management Board (MB) approved the conduct of two long-term 2-D Core-Concrete Interaction (CCI) experiments designed to provide information in several areas, including: (i) lateral vs. axial power split during dry core-concrete interaction, (ii) integral debris coolability data following late phase flooding, and (iii) data regarding the nature and extent of the cooling transient following breach of the crust formed at the melt-water interface. This data report provides thermal hydraulic test results from the CCI-2 experiment, which was conducted on August 24, 2004. Test specifications for CCI-2 are provided in Table 1-1. This experiment investigated the interaction of a fully oxidized 400 kg PWR core melt, initially containing 8 wt % Limestone/Common Sand (LCS) concrete, with a specially designed two-dimensional LCS concrete test section with an initial cross-sectional area of 50 cm x 50 cm. The report begins by providing a summary description of the CCI-2 test apparatus and operating procedures, followed by presentation of the thermal-hydraulic results. Detailed posttest debris examination results will be provided in a subsequent publication. Observations drawn within this report regarding the overall cavity erosion behavior may be subject to revision once the posttest examinations are completed, since these examinations will fully reveal the final cavity shape.« less

Estimation of state and material properties during heat-curing molding of composite materials using data assimilation: A numerical study.

PubMed

Matsuzaki, Ryosuke; Tachikawa, Takeshi; Ishizuka, Junya

2018-03-01

Accurate simulations of carbon fiber-reinforced plastic (CFRP) molding are vital for the development of high-quality products. However, such simulations are challenging and previous attempts to improve the accuracy of simulations by incorporating the data acquired from mold monitoring have not been completely successful. Therefore, in the present study, we developed a method to accurately predict various CFRP thermoset molding characteristics based on data assimilation, a process that combines theoretical and experimental values. The degree of cure as well as temperature and thermal conductivity distributions during the molding process were estimated using both temperature data and numerical simulations. An initial numerical experiment demonstrated that the internal mold state could be determined solely from the surface temperature values. A subsequent numerical experiment to validate this method showed that estimations based on surface temperatures were highly accurate in the case of degree of cure and internal temperature, although predictions of thermal conductivity were more difficult.

Measuring flood discharge in unstable stream channels using ground-penetrating radar

USGS Publications Warehouse

Spicer, K.R.; Costa, J.E.; Placzek, G.

1997-01-01

Field experiments were conducted to test the ability of ground-penetrating radar (GPR) to measure stream-channel cross sections at high flows without the necessity of placing instruments in the water. Experiments were conducted at four U.S. Geological Survey gaging stations in southwest Washington State. With the GPR antenna suspended above the water surface from a bridge or cableway, traverses were made across stream channels to collect radar profile plots of the streambed. Subsequent measurements of water depth were made using conventional depth-measuring equipment (weight and tape) and were used to calculate radar signal velocities. Other streamflow-parameter data were collected to examine their relation to radar signal velocity and to claritv of streambed definition. These initial tests indicate that GPR is capable of producing a reasonably accurate (??20%) stream-channel profile and discharge far more quickly than conventional stream-gaging procedures, while avoiding the problems and hazards associated with placing instruments in the water.

Jet Noise Reduction Potential from Emerging Variable Cycle Technologies

NASA Technical Reports Server (NTRS)

Henderson, Brenda; Bridges, James; Wernet, Mark

2012-01-01

Acoustic and flow-field experiments were conducted on exhaust concepts for the next generation supersonic, commercial aircraft. The concepts were developed by Lockheed Martin (LM), Rolls-Royce Liberty Works (RRLW), and General Electric Global Research (GEGR) as part of an N+2 (next generation forward) aircraft system study initiated by the Supersonics Project in NASA s Fundamental Aeronautics Program. The experiments were conducted in the Aero-Acoustic Propulsion Laboratory at the NASA Glenn Research Center. The exhaust concepts utilized ejectors, inverted velocity profiles, and fluidic shields. One of the ejector concepts was found to produce stagnant flow within the ejector and the other ejector concept produced discrete-frequency tones that degraded the acoustic performance of the model. The concept incorporating an inverted velocity profile and fluid shield produced overall-sound-pressure-level reductions of 6 dB relative to a single stream nozzle at the peak jet noise angle for some nozzle pressure ratios. Flow separations in the nozzle degraded the acoustic performance of the inverted velocity profile model at low nozzle pressure ratios.

Jet Noise Reduction Potential From Emerging Variable Cycle Technologies

NASA Technical Reports Server (NTRS)

2012-01-01

Acoustic and flow-field experiments were conducted on exhaust concepts for the next generation supersonic, commercial aircraft. The concepts were developed by Lockheed Martin (LM), Rolls-Royce Liberty Works (RRLW), and General Electric Global Research (GEGR) as part of an N+2 (next generation forward) aircraft system study initiated by the Supersonics Project in NASA s Fundamental Aeronautics Program. The experiments were conducted in the Aero-Acoustic Propulsion Laboratory at the NASA Glenn Research Center. The exhaust concepts utilized ejectors, inverted velocity profiles, and fluidic shields. One of the ejector concepts was found to produce stagnant flow within the ejector and the other ejector concept produced discrete-frequency tones that degraded the acoustic performance of the model. The concept incorporating an inverted velocity profile and fluid shield produced overall-sound-pressure-level reductions of 6 dB relative to a single stream nozzle at the peak jet noise angle for some nozzle pressure ratios. Flow separations in the nozzle degraded the acoustic performance of the inverted velocity profile model at low nozzle pressure ratios.

Research on red tide occurrences using enclosed experimental ecosystems in west Xiamen Harbor, China—Relationship between various factors and red tide occurrences

NASA Astrophysics Data System (ADS)

Lin, Yu; Harrison, P. J.

2000-06-01

A series of enclosed ecosystem experiments were conducted in a land-based tank near the seaside of West Xiamen Harbor. The results of experiments conducted in different seasons and years showed a repeatable phytoplankton succession. In this relatively stable ecosystem with added nutrients and trace metals, diatoms dominated initially, dinoflagellates dominated in the later stage, and dinoflagellate red tides eventually occurred. Vitamin B12 enrichment may speed up this succession process. Stirring the water column could stop this process. Soluble Mn at a level of 3 4 μg/L in seawater, which also is the existing concentration of soluble Mn in Xiamen Harbor seawater, is sufficient for the multiplication of algae and occurrence of red tide. The present study showed that excessive soluble Mn in Xiamen Harbor cannot cause red tide, and that Fe was one of the important factors causing diatiom red tide in this present study.

Flight evaluation of two segment approaches for jet transport noise abatement

NASA Technical Reports Server (NTRS)

Rogers, R. A.; Wohl, B.; Gale, C. M.

1973-01-01

A 75 flight-hour operational evaluation was conducted with a representative four-engine fan-jet transport in a representative airport environment. The flight instrument systems were modified to automatically provide pilots with smooth and continuous pitch steering command information during two-segment approaches. Considering adverse weather, minimum ceiling and flight crew experience criteria, a transition initiation altitude of approximately 800 feet AFL would have broadest acceptance for initiating two-segment approach procedures in scheduled service. The profile defined by the system gave an upper glidepath of approximately 6 1/2 degrees. This was 1/2 degree greater than inserted into the area navigation system. The glidepath error is apparently due to an erroneous along-track, distance-to-altitude profile.

Reactive barrier system for nitrate removal from mine effluents in northern Sweden: Laboratory experiments

NASA Astrophysics Data System (ADS)

Herbert, Roger

2010-05-01

Laboratory column experiments have been conducted to determine nitrate removal rates from mine effluents by denitrification, with the purpose of providing initial data for the construction of a pilot scale reactive barrier system at the Malmberget iron mine, Sweden. Experiments were conducted at several different flow rates at 5C, 10C and room temperature; annual mean temperatures at the Malmberget site lie close to 0C. Columns were filled with an organic substrate consisting of sawdust mixed with sewage sludge, the source of denitrifying bacteria, supported by oven-dried clay pellets. Apparent denitrification rates, calculated from inflow and outflow nitrate concentrations and column hydraulic residence time, ranged from 5 to 13 mg N/L/d, with the lowest rates corresponding to the 5C experiments. These rates are, however, limited to a certain degree by the low flow rate and the supply of electrons acceptors (i.e. nitrate) to denitrifying bacteria. Results from the column experiment have been used to construct a barrier system in Malmberget, Sweden. Trial runs with the pilot-scale barrier will be conducted during 2010, with the purpose of determining the performance of the barrier as mean air temperatures increase from below to above 0C and saturated flow commences in the barrier. The barrier system is constructed as a rectangular container with steel sheet walls (9m length in flow direction, 1.5m deep), and the flow rate will be adjusted to a hydraulic residence time of 1 day. The pilot-scale barrier system currently lies above ground, but a permanent barrier system would be installed below the ground surface so that the system can be maintained at positive temperatures throughout the year.

Cylindrical Electrolyser Enhanced Electrokinetic Remediation of Municipal Solid Waste Incineration Fly Ashes

NASA Astrophysics Data System (ADS)

Huang, Tao; Zhou, Lulu; Tao, Junjun; Liu, Longfei

2018-01-01

The paper discusses enhancement and efficiency of removing spiked heavy metal (HM) contaminants from the municipal solid waste incineration (MSWI) fly ashes in the cylindrical electrolyser device. The characterization parameters of the electrolyte solution pH, electric current, electrical conductivity, voltage gradient were discussed after the experiment. The chemical speciation of HMs was analysed between the original samples and remediated ones by BCR sequential extraction. The detoxification efficiencies of Zn, Pb, Cu and Cd in the column-uniform device were compared with that in the traditional rectangular apparatus. The pH value changed smoothly with small amplitude of oscillation in general in cathode and anode compartments except the initial break. The electrical current rapidly increased on the first day of the experiment and steadily declined after that and the electrical conductivity presented a clear rising trend. The residual partition of detoxified samples were obviously lifted which was much higher than the analysis data of the raw materials. The pH and the electrical conductivity in sample region were distributed more uniformly and the blind area was effectively eliminated in the electrolytic cells which was indirectly validated by the contrastive detoxification result of the spiked HMs between the rectangular and cylindrical devices.

Transition from Ignition to Flame Growth under External Radiation in Three Dimensions (TIGER-3D)

NASA Technical Reports Server (NTRS)

Kashiwagi, Takashi; Nakamura, Yuji; Olson, Sandra L.; Mell, William

2004-01-01

This study focuses on localized ignition by external radiant flux and subsequent flame growth over thin polymeric materials (plastic and paper) in microgravity. Two transition stages were observed. The first transition stage covers the period from the onset of ignition to the formation of stabilized flame near the ignited area. This is followed by the second transition of the flame growth stage from the initial stabilized flame to sustained fire growth away from the ignited area. For the first stage, ignition experiments of thin PMMA sheets were conducted using a CO2 laser as an external source in the 10 s drop tower. The results of front side surface ignition and of backside surface ignition were observed. The effects of imposed flow velocity, sample thickness, and ambient oxygen concentration on ignition are obtained. Numerical study was conducted to investigate to understand and predict ignition behavior observed in the experiments. For the second stage, numerical study is being conducted to describe the effects of gravity on heat release rate of a PMMA sheet. The gravity level was varied from zero to normal gravity. The preliminary results show that the maximum heat release occurs at around 0.02 g.

Transition from Ignition to Flame Growth under External Radiation in 3D

NASA Technical Reports Server (NTRS)

Kashiwagi, Takashi; Nakamura, Yuji; Mell, William E.; Olson, Sandra L.

2004-01-01

This study focuses on localized ignition by external radiant flux and subsequent flame growth over thin polymeric materials (plastic and paper) in microgravity. Two transition stages were observed. The first transition stage covers the period from the onset of ignition to the formation of stabilized flame near the ignited area. This is followed by the second transition of the flame growth stage from the initial stabilized flame to sustained fire growth away from the ignited area. For the first stage, ignition experiments of thin PMMA sheets were conducted using a CO2 laser as an external source in the 10 s drop tower. The results of front side surface ignition and of backside surface ignition were observed. The effects of imposed flow velocity, sample thickness, and ambient oxygen concentration on ignition are obtained. Numerical study was conducted to investigate to understand and predict ignition behavior observed in the experiments. For the second stage, numerical study is being conducted to describe the effects of gravity on heat release rate of a PMMA sheet. The gravity level was varied from zero to normal gravity. The preliminary results show that the maximum heat release occurs at around 0.02 g.

Drying kinetic of industrial cassava flour: Experimental data in view.

PubMed

Odetunmibi, Oluwole A; Adejumo, Oluyemisi A; Oguntunde, Pelumi E; Okagbue, Hilary I; Adejumo, Adebowale O; Suleiman, Esivue A

2017-12-01

In this data article, laboratory experimental investigation results on drying kinetic properties: the drying temperature ( T ), drying air velocity ( V ) and dewatering time (Te), each of the factors has five levels, and the experiment was replicated three times and the output: drying rate and drying time obtained, were observed. The experiment was conducted at National Centre for Agricultural Mechanization (NCAM) for a period of eight months, in 2014. Analysis of variance was carried out using randomized complete block design with factorial experiment on each of the outputs: drying rate and drying times of the industrial cassava flour. A clear picture on each of these outputs was provided separately using tables and figures. It was observed that all the main factors as well as two and three ways interactions are significant at 5% level for both drying time and rate. This also implies that the rate of drying grated unfermented cassava mash, to produce industrial cassava flour, depend on the dewatering time (the initial moisture content), temperature of drying, velocity of drying air as well as the combinations of these factors altogether. It was also discovered that all the levels of each of these factors are significantly difference from one another. In summary, the time of drying is a function of the dewatering time which was responsible for the initial moisture content. The higher the initial moisture content the longer the time of drying, and the lower the initial moisture content, the lower the time of drying. Also, the higher the temperature of drying the shorter the time of drying and vice versa. Also, the air velocity effect on the drying process was significant. As velocity increases, rate of drying also increases and vice versa. Finally, it can be deduced that the drying kinetics are influenced by these processing factors.

Effect of Microgravity on Early Events of Biological Nitrogen Fixation in Medicago Truncatula: Initial Results from the SyNRGE Experiment

NASA Technical Reports Server (NTRS)

Stutte, Gary W.; Roberts, Michael S.

2011-01-01

SyNRGE (Symbiotic Nodulation in a Reduced Gravity Environment) was a sortie mission on STS-135 in the Biological Research in Canisters (BRIC) hardware to study the effect of microgravity on a plant-microbe symbiosis resulting in biological nitrogen fixation. Medicago truncatula, a model species of the legume family, was inoculated with its bacterial symbiont, Sinorhizobium meliloti, to observe early events associated with infection and nodulation in Petri Dish Fixation Units (PDFUs). Two sets of experiments were conducted in orbit and in 24-hour delayed ground controls. Experiment one was designed to determine if S. meliloti infect M. truncatula and initiate physiological changes associated with nodule formation. Roots of five-day-old M. truncatula cultivar Jemalong A17 (Enodll::gus) were inoculated 24 hr before launch with either S. meliloti strain 1021 or strain ABS7 and integrated into BRIC-PDFU hardware placed in a 4 C Cold Bag for launch on Atlantis. Inoculated plants and uninoculated controls were maintained in the dark at ambient temperature in the middeck of STS-135 for 11 days before fixation in RNAlater(tM) by crew activation of the PDFU. Experiment two was designed to determine if microgravity altered the process of bacterial infection and host plant nodule formation. Seeds of two M. truncatula cultivar Jemalong A17 lines, the Enodll::gus used in experiment 1, and SUNN, a super-nodulating mutant of A17, were germinated on orbit for 11 days in the middeck cabin and returned to Earth alive inside of BRIC-PDFU's at 4 C. S. meliloti strains 1021 and ABS7 were cultivated separately in broth culture on orbit and also returned to Earth alive. After landing, flight- and groundgrown plants and bacteria were transferred from BRIC-PDFU's into Nunc(tm) 4-well plates for reciprocity crosses. Rates of plant growth and nodule development on Buffered Nodulation Medium (lacking nitrogen) were measured for 14 days. Preliminary analysis' of Experiment 1 confirms that legumes and bacteria cultivated in space 'initiate the symbiotic interaction leading to nitrogen fixation and that bacteria retain the ability to form nodules on M. truncatula roots. Initial assessment of experiment 2 shows 100% seed germination and excellent bacterial growth in microgravity.

Evaluating the implementation of a quality improvement process in General Practice using a realist evaluation framework.

PubMed

Moule, Pam; Clompus, Susan; Fieldhouse, Jon; Ellis-Jones, Julie; Barker, Jacqueline

2018-05-25

Underuse of anticoagulants in atrial fibrillation is known to increase the risk of stroke and is an international problem. The National Institute for Health Care and Excellence guidance CG180 seeks to reduce atrial fibrillation related strokes through prescriptions of Non-vitamin K antagonist Oral Anticoagulants. A quality improvement programme was established by the West of England Academic Health Science Network (West of England AHSN) to implement this guidance into General Practice. A realist evaluation identified whether the quality improvement programme worked, determining how and in what circumstances. Six General Practices in 1 region, became the case study sites. Quality improvement team, doctor, and pharmacist meetings within each of the General Practices were recorded at 3 stages: initial planning, review, and final. Additionally, 15 interviews conducted with the practice leads explored experiences of the quality improvement process. Observation and interview data were analysed and compared against the initial programme theory. The quality improvement resources available were used variably, with the training being valued by all. The initial programme theories were refined. In particular, local workload pressures and individual General Practitioner experiences and pre-conceived ideas were acknowledged. Where key motivators were in place, such as prior experience, the programme achieved optimal outcomes and secured a lasting quality improvement legacy. The employment of a quality improvement programme can deliver practice change and improvement legacy outcomes when particular mechanisms are employed and in contexts where there is a commitment to improve service. © 2018 John Wiley & Sons, Ltd.

Initial Results of an MDO Method Evaluation Study

NASA Technical Reports Server (NTRS)

Alexandrov, Natalia M.; Kodiyalam, Srinivas

1998-01-01

The NASA Langley MDO method evaluation study seeks to arrive at a set of guidelines for using promising MDO methods by accumulating and analyzing computational data for such methods. The data are collected by conducting a series of re- producible experiments. In the first phase of the study, three MDO methods were implemented in the SIGHT: framework and used to solve a set of ten relatively simple problems. In this paper, we comment on the general considerations for conducting method evaluation studies and report some initial results obtained to date. In particular, although the results are not conclusive because of the small initial test set, other formulations, optimality conditions, and sensitivity of solutions to various perturbations. Optimization algorithms are used to solve a particular MDO formulation. It is then appropriate to speak of local convergence rates and of global convergence properties of an optimization algorithm applied to a specific formulation. An analogous distinction exists in the field of partial differential equations. On the one hand, equations are analyzed in terms of regularity, well-posedness, and the existence and unique- ness of solutions. On the other, one considers numerous algorithms for solving differential equations. The area of MDO methods studies MDO formulations combined with optimization algorithms, although at times the distinction is blurred. It is important to

Improved Modeling of Land-Atmosphere Interactions using a Coupled Version of WRF with the Land Information System

NASA Technical Reports Server (NTRS)

Case, Jonathan L.; LaCasse, Katherine M.; Santanello, Joseph A., Jr.; Lapenta, William M.; Petars-Lidard, Christa D.

2007-01-01

The exchange of energy and moisture between the Earth's surface and the atmospheric boundary layer plays a critical role in many hydrometeorological processes. Accurate and high-resolution representations of surface properties such as sea-surface temperature (SST), vegetation, soil temperature and moisture content, and ground fluxes are necessary to better understand the Earth-atmosphere interactions and improve numerical predictions of weather and climate phenomena. The NASA/NWS Short-term Prediction Research and Transition (SPORT) Center is currently investigating the potential benefits of assimilating high-resolution datasets derived from the NASA moderate resolution imaging spectroradiometer (MODIS) instruments using the Weather Research and Forecasting (WRF) model and the Goddard Space Flight Center Land Information System (LIS). The LIS is a software framework that integrates satellite and ground-based observational and modeled data along with multiple land surface models (LSMs) and advanced computing tools to accurately characterize land surface states and fluxes. The LIS can be run uncoupled to provide a high-resolution land surface initial condition, and can also be run in a coupled mode with WRF to integrate surface and soil quantities using any of the LSMs available in LIS. The LIS also includes the ability to optimize the initialization of surface and soil variables by tuning the spin-up time period and atmospheric forcing parameters, which cannot be done in the standard WRF. Among the datasets available from MODIS, a leaf-area index field and composite SST analysis are used to improve the lower boundary and initial conditions to the LIS/WRF coupled model over both land and water. Experiments will be conducted to measure the potential benefits from using the coupled LIS/WRF model over the Florida peninsula during May 2004. This month experienced relatively benign weather conditions, which will allow the experiments to focus on the local and mesoscale impacts of the high-resolution MODIS datasets and optimized soil and surface initial conditions. Follow-on experiments will examine the utility of such an optimized WRF configuration for more complex weather scenarios such as convective initiation. This paper will provide an overview of the experiment design and present preliminary results from selected cases in May 2004.

The deformation mechanisms and size effects of single-crystal magnesium

NASA Astrophysics Data System (ADS)

Byer, Cynthia M.

In this work, we seek to understand the deformation mechanisms and size effects of single-crystal magnesium at the micrometer scale through both microcompression experiments and finite element simulations. Microcompression experiments are conducted to investigate the impact of initial dislocation density and orientation on size effects. Micropillars are fabricated using a focused ion beam and tested in a Nanoindenter using a diamond fiat tip as a compression platen. Two different initial dislocation densities are examined for [0001] oriented micropillars. Our results demonstrate that decreasing the initial dislocation density results in an increased size effect in terms of increased strength and stochasticity. Microcompression along the [23¯14] axis results in much lower strengths than for [0001] oriented samples. Post-mortem analysis reveals basal slip in both [0001] and [23¯14] micropillars. The application of a stochastic probability model shows good agreement between theoretical predictions and experimental results for size effects with our values of initial dislocation density and micropillar dimensions. Size effects are then incorporated into a single-crystal plasticity model (modified from Zhang and Joshi [1]) implemented in ABAQUS/STANDARD as a user-material subroutine. The model successfully captures the phenomena typically associated with size effects of increasing stochasticity and strength with decreasing specimen size and also accounts for the changing trends resulting from variations in initial dislocation density that we observe in the experiments. Finally, finite element simulations are performed with the original (traditional, without size effects) crystal plasticity model [1] to investigate the relative activities of the deformation modes of single-crystal magnesium for varying degrees of misalignment in microcompression. The simulations reveal basal activity in all micropillars, even for perfectly aligned compression along the [0001] axis. Pyramidal < c + a > activity dominates until the misalignment increases to 2°, when basal slip takes over as the dominant mode. The stress-strain curves for the case of 0° misalignment agrees well with experimental curves, indicating that good alignment was achieved during the experiments. Through this investigation, we gain a better understanding of how to control the size effects, as well as the deformation mechanisms operating at the small scale in magnesium.

Numerical and Experimental Approaches Toward Understanding Lava Flow Heat Transfer

NASA Astrophysics Data System (ADS)

Rumpf, M.; Fagents, S. A.; Hamilton, C.; Crawford, I. A.

2013-12-01

We have performed numerical modeling and experimental studies to quantify the heat transfer from a lava flow into an underlying particulate substrate. This project was initially motivated by a desire to understand the transfer of heat from a lava flow into the lunar regolith. Ancient regolith deposits that have been protected by a lava flow may contain ancient solar wind, solar flare, and galactic cosmic ray products that can give insight into the history of our solar system, provided the records were not heated and destroyed by the overlying lava flow. In addition, lava-substrate interaction is an important aspect of lava fluid dynamics that requires consideration in lava emplacement models Our numerical model determines the depth to which the heat pulse will penetrate beneath a lava flow into the underlying substrate. Rigorous treatment of the temperature dependence of lava and substrate thermal conductivity and specific heat capacity, density, and latent heat release are imperative to an accurate model. Experiments were conducted to verify the numerical model. Experimental containers with interior dimensions of 20 x 20 x 25 cm were constructed from 1 inch thick calcium silicate sheeting. For initial experiments, boxes were packed with lunar regolith simulant (GSC-1) to a depth of 15 cm with thermocouples embedded at regular intervals. Basalt collected at Kilauea Volcano, HI, was melted in a gas forge and poured directly onto the simulant. Initial lava temperatures ranged from ~1200 to 1300 °C. The system was allowed to cool while internal temperatures were monitored by a thermocouple array and external temperatures were monitored by a Forward Looking Infrared (FLIR) video camera. Numerical simulations of the experiments elucidate the details of lava latent heat release and constrain the temperature-dependence of the thermal conductivity of the particulate substrate. The temperature-dependence of thermal conductivity of particulate material is not well known, especially at high temperatures. It is important to have this property well constrained as substrate thermal conductivity is the greatest influence on the rate of lava-substrate heat transfer. At Kilauea and Mauna Loa Volcanoes, Hawaii, and other volcanoes that threaten communities, lava may erupt over a variety of substrate materials including cool lava flows, volcanic tephra, soils, sand, and concrete. The composition, moisture, organic content, porosity, and grain size of the substrate dictate the thermophysical properties, thus affecting the transfer of heat from the lava flow into the substrate and flow mobility. Particulate substrate materials act as insulators, subduing the rate of heat transfer from the flow core. Therefore, lava that flows over a particulate substrate will maintain higher core temperatures over a longer period, enhancing flow mobility and increasing the duration and aerial coverage of the resulting flow. Lava flow prediction models should include substrate specification with temperature dependent material property definitions for an accurate understanding of flow hazards.

A cold ejector for closed-cycle helium refrigerators

NASA Technical Reports Server (NTRS)

Johnson, D. L.; Daggett, D. L.

1987-01-01

The test results are presented of an initial cold helium ejector design that can be installed on a closed cycle refrigerator to provide refrigeration at temperatures below 4.2 K. The ejector, test apparatus, instrumentation, and test results are described. Tests were conducted both at room temperature and at cryogenic temperatures to provide operational experience with the ejector as well as for future use in the subsequent design of an ejector that will provide refrigeration at temperatures below 3 K.

A new model for care population management.

PubMed

Williams, Jeni

2013-03-01

Steps toward building a population management model of care should include: Identifying the population that would be cared for through a population management initiative. Conducting an actuarial analysis for this population, reviewing historical utilization and cost data and projecting changes in utilization. Investing in data infrastructure that supports the exchange of data among providers and with payers. Determining potential exposure to downside risk and organizational capacity to assume this risk. Experimenting with payment models and care delivery approaches Hiring care coordinators to manage care for high-risk patients.

Three-Dimensional Structure of Thermohaline Staircases in the Tropical North Atlantic and Their Effect on Acoustic Propagation

DTIC Science & Technology

2012-12-01

PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Naval Postgraduate School Monterey, CA 93943–5000 8. PERFORMING ORGANIZATION REPORT NUMBER 9...experiment initially designed to test pressure at the base of an ocean, by inserting a narrow heat-conducting pipe vertically to draw water to the...tgα ≈ tgαT (6) Wall thus hypothesized that the interface should align with isotherms but not necessarily isohalines. An observational test was

Observation of frequency up-conversion in the propagation of a high-power microwave pulse in a self-generated plasma

NASA Technical Reports Server (NTRS)

Kuo, S. P.; Zhang, Y. S.; Ren, A.

1990-01-01

A chamber experiment is conducted to study the propagation of a high-power microwave pulse. The results show that the pulse is experiencing frequency up-shift while ionizing the background air if the initial carrier frequency of the pulse is higher than the electron plasma frequency at the incident boundary. Such a frequency autoconversion process may lead to reflectionless propagation of a high-power microwave pulse through the atmosphere.

Shared Negative Experiences Lead to Identity Fusion via Personal Reflection.

PubMed

Jong, Jonathan; Whitehouse, Harvey; Kavanagh, Christopher; Lane, Justin

2015-01-01

Across three studies, we examined the role of shared negative experiences in the formation of strong social bonds--identity fusion--previously associated with individuals' willingness to self-sacrifice for the sake of their groups. Studies 1 and 2 were correlational studies conducted on two different populations. In Study 1, we found that the extent to which Northern Irish Republicans and Unionists experienced shared negative experiences was associated with levels of identity fusion, and that this relationship was mediated by their reflection on these experiences. In Study 2, we replicated this finding among Bostonians, looking at their experiences of the 2013 Boston Marathon Bombings. These correlational studies provide initial evidence for the plausibility of our causal model; however, an experiment was required for a more direct test. Thus, in Study 3, we experimentally manipulated the salience of the Boston Marathon Bombings, and found that this increased state levels of identity fusion among those who experienced it negatively. Taken together, these three studies provide evidence that shared negative experience leads to identity fusion, and that this process involves personal reflection.

Study of iron oxide nanoparticles in soil for remediation of arsenic

NASA Astrophysics Data System (ADS)

Shipley, Heather J.; Engates, Karen E.; Guettner, Allison M.

2011-06-01

There is a growing interest in the use of nanoparticles for environmental applications due to their unique physical and chemical properties. One possible application is the removal of contaminants from water. In this study, the use of iron oxide nanoparticles (19.3 nm magnetite and 37.0 nm hematite) were examined to remove arsenate and arsenite through column studies. The columns contained 1.5 or 15 wt% iron oxide nanoparticles and soil. Arsenic experiments were conducted with 1.5 wt% iron oxides at 1.5 and 6 mL/h with initial arsenate and arsenite concentrations of 100 μg/L. Arsenic release occurred after 400 PV, and 100% release was reached. A long-term study was conducted with 15 wt% magnetite nanoparticles in soil at 0.3 mL/h with an initial arsenate concentration of 100 μg/L. A negligible arsenate concentration occurred for 3559.6 pore volumes (PVs) (132.1 d). Eventually, the arsenate concentration reached about 20% after 9884.1 PV (207.9 d). A retardation factor of about 6742 was calculated indicating strong adsorption of arsenic to the magnetite nanoparticles in the column. Also, increased adsorption was observed after flow interruption. Other experiments showed that arsenic and 12 other metals (V, Cr, Co, Mn, Se, Mo, Cd, Pb, Sb, Tl, Th, U) could be simultaneously removed by the iron oxide nanoparticles in soil. Effluent concentrations were less than 10% for six out of the 12 metals. Desorption experiment showed partial irreversible sorption of arsenic to the iron oxide nanoparticle surface. Strong adsorption, large retardation factor, and resistant desorption suggest that magnetite and hematite nanoparticles have the potential to be used to remove arsenic in sandy soil possibly through in situ techniques.

Vestibular system and neural correlates of motion sickness

NASA Technical Reports Server (NTRS)

Miller, Alan D.

1986-01-01

Initial studies re-examine the role of certain central nervous system structures in the production of vestibular-induced vomiting and vomiting in general. All experiments were conducted using cats. Since these studies demonstrated that the essential role of various central structures in vestibular-induced vomiting is only poorly understood, efforts were re-directed to study the control of the effector muscles (diaphragm and abdominal muscles) that produce the pressure changes responsible for vomiting, with the goal of determining how this control mechanism is engaged during motion sickness. Experiments were conducted to localize the motoneurons that innervate the individual abdominal muscles and the portion of the diaphragm that surrounds the esophagus. A central question regarding respiratory muscle control during vomiting is whether these muscles are activated via the same brain stem pre-motor neurons that provide descending respiratory drive and/or by other descending input(s). In other experiments, the use of a combination of pitch and roll motions to produce motion sickness in unrestrained cats was evaluated. This stimulus combination can produce vomiting in only the most susceptible cats and is thus not as provacative a stimulus for cats as vertical linear acceleration.

Development of Guided Inquiry-Based Student Lab Worksheet on the Making of Pineapple Flavoring

NASA Astrophysics Data System (ADS)

Dwiyanti, G.; Suryatna, A.; Taibah, I.

2017-02-01

The aim of this research was to develop guided inquiry based student lab worksheet on making pineapple flavour and knowing the quality of worksheet that is being developed. Research methods that is being conducted is research and development that is limited by a preliminary studies (literature studies, field surveys, and preparation of the initial product) and development of the model (within limited testing). The results from analyze the books sources and fields survey showed that the characteristic of esterification lab worksheet that currently available still in the direct instruction form (cookbook). The optimization result of making pineapple flavour experiment that was conducted are the ethanol volume 3 mL, butyric acid volume 2 mL, sulfuric acid 5 drops, saturated NaHCO3 solution volume 9 mL, and temperature of heating was 80 °C. The characteristic of guided inquiry based student lab worksheet that was developed contained phenomenon and instructions that suitable with inquiry stages to guide the students in doing the experiment of making pineapple flavour. The evaluation of designated teachers and lecturers of the developed student worksheet were very good (96,08%). Lab-experiment feasibility achieved by using guided inquiry based student lab worksheets that is being developed based on the inquiry stages that conducted by student were found very good (97,50%) and accomplishment based on students’ answer of the tasks in the worksheet were found very good (83,84%). Students’ responses of the experiments using the developed worksheet are found very good (81,84%).

40 CFR 63.2261 - By what date must I conduct performance tests or other initial compliance demonstrations?

Code of Federal Regulations, 2013 CFR

2013-07-01

... tests upon initial startup or no later than 180 calendar days after the compliance date that is... conduct initial compliance demonstrations that do not require performance tests upon initial startup or no...

Pathways to Improve Student Pharmacists’ Experience in Research

PubMed Central

McClendon, Katie S.; Bell, Allison M.; Ellis, Ashley; Adcock, Kim G.; Hogan, Shirley; Ross, Leigh Ann

2015-01-01

Objective. To describe the implementation of a student research program and to provide outcomes from the initial 4 years’ experience. Design. Students conducted individual research projects in a 4-year longitudinal program (known as Pathway), with faculty member advising and peer mentoring. A prospective assessment compared perceptions of those who completed the Pathway program with those of students who did not. Descriptive statistics, t tests, and analysis of variance (ANOVA) were used. Assessment. The class of 2013 was the first to complete the Pathway program. In the Pathway assessment project, 59% (n=47) of students who responded reached self-set goals. Pathway students agreed that this research experience improved their ability to work/think independently, evaluate literature, and distinguish themselves from other students. Conclusion. The Pathway program helped students understand the research process and reach other self-set goals. PMID:26089567

Recent experience in seeding transonic/supersonic flows at AEDC

NASA Astrophysics Data System (ADS)

Heltsley, F. L.

1985-10-01

The laser velocimeter has been utilized for several years at the Arnold Engineering and Development Center (AEDC) as a flow diagnostics tool. Most applications, following the initial proof-of-concept experiments, have involved relatively complex unknown flow fields in which the more conventional, intrusive techniques had either not been attempted or had yielded unsatisfactory results. A blunt-base nozzle-afterbody base flow study is discussed as a respresentative example of such applications. A wide variety of problems have been encountered during these tests, many of which have proven to be closely related to the size and/or size distribution of the seeding material within the fluid. Resulting measurement uncertainties could often not be conclusively resolved because of the unknown nature of the flow field. The other experiments listed were conducted to provide known aerodynamic conditions for comparison with the velocimeter results.

Recent experience in seeding transonic/supersonic flows at AEDC

NASA Technical Reports Server (NTRS)

Heltsley, F. L.

1985-01-01

The laser velocimeter has been utilized for several years at the Arnold Engineering and Development Center (AEDC) as a flow diagnostics tool. Most applications, following the initial proof-of-concept experiments, have involved relatively complex unknown flow fields in which the more conventional, intrusive techniques had either not been attempted or had yielded unsatisfactory results. A blunt-base nozzle-afterbody base flow study is discussed as a respresentative example of such applications. A wide variety of problems have been encountered during these tests, many of which have proven to be closely related to the size and/or size distribution of the seeding material within the fluid. Resulting measurement uncertainties could often not be conclusively resolved because of the unknown nature of the flow field. The other experiments listed were conducted to provide known aerodynamic conditions for comparison with the velocimeter results.

Investigation of laser pulse length and pre-plasma scale length impact on hot electron generation on OMEGA-EP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peebles, J.; Wei, M. S.; Arefiev, A. V.

A series of experiments studying pre-plasma’s effect on electron generation and transport due to a high intensity laser were conducted on the OMEGA-EP laser facility. A controlled pre-plasma was produced in front of an aluminum foil target prior to the arrival of the high intensity short pulse beam. Energetic electron spectra were characterized with magnetic and bremsstrahlung spectrometers. Preplasma and pulse length were shown to have a large impact on the temperature of lower energy, ponderomotive scaling electrons. Furthermore, super-ponderomotive electrons, seen in prior pre-plasma experiments with shorter pulses, were observed without any initial pre-plasma in our experiment. 2D particle-in-cellmore » and radiation-hydrodynamic simulations shed light on and validate these experimental results.« less

Fractional Factorial Experiment Designs to Minimize Configuration Changes in Wind Tunnel Testing

NASA Technical Reports Server (NTRS)

DeLoach, Richard; Cler, Daniel L.; Graham, Albert B.

2002-01-01

This paper serves as a tutorial to introduce the wind tunnel research community to configuration experiment designs that can satisfy resource constraints in a configuration study involving several variables, without arbitrarily eliminating any of them from the experiment initially. The special case of a configuration study featuring variables at two levels is examined in detail. This is the type of study in which each configuration variable has two natural states - 'on or off', 'deployed or not deployed', 'low or high', and so forth. The basic principles are illustrated by results obtained in configuration studies conducted in the Langley National Transonic Facility and in the ViGYAN Low Speed Tunnel in Hampton, Virginia. The crucial role of interactions among configuration variables is highlighted with an illustration of difficulties that can be encountered when they are not properly taken into account.

Photodynamic inactivation of microorganisms which cause pulmonary diseases with infrared light: an in vitro study

NASA Astrophysics Data System (ADS)

Leite, Ilaiáli S.; Geralde, Mariana C.; Salina, Ana C.; Medeiros, Alexandra I.; Kurachi, Cristina; Bagnato, Vanderlei S.; Inada, Natalia M.

2014-03-01

Lower respiratory infections are among the leading causes of death worldwide. In this study, it was evaluated the interaction of indocyanine green, a photosensitizer activated by infrared light, with alveolar macrophages and the effectiveness of the photodynamic therapy using this compound against Streptococcus pneumoniae . Initial experiments analyzed indocyanine green toxicity to alveolar macrophages in the dark with different drug concentrations and incubation times, and macrophage viability was obtained with the MTT method. The average of the results showed viability values below 90% for the two highest concentrations. Experiments with Streptococcus pneumoniae showed photodynamic inactivation with 10 μM indocyanine green solution. Further experiments with the bacteria in co-culture with AM will be conducted verifying the photodynamic inactivation effectiveness of the tested drug concentrations and incubation periods using infrared light.

Investigation of laser pulse length and pre-plasma scale length impact on hot electron generation on OMEGA-EP

DOE PAGES

Peebles, J.; Wei, M. S.; Arefiev, A. V.; ...

2017-02-02

A series of experiments studying pre-plasma’s effect on electron generation and transport due to a high intensity laser were conducted on the OMEGA-EP laser facility. A controlled pre-plasma was produced in front of an aluminum foil target prior to the arrival of the high intensity short pulse beam. Energetic electron spectra were characterized with magnetic and bremsstrahlung spectrometers. Preplasma and pulse length were shown to have a large impact on the temperature of lower energy, ponderomotive scaling electrons. Furthermore, super-ponderomotive electrons, seen in prior pre-plasma experiments with shorter pulses, were observed without any initial pre-plasma in our experiment. 2D particle-in-cellmore » and radiation-hydrodynamic simulations shed light on and validate these experimental results.« less

Vanishing Act: Experiments on Fission Track Annealing in Monazite

NASA Astrophysics Data System (ADS)

Shipley, N. K.; Fayon, A. K.

2006-12-01

To determine the viability of monazite as a low temperature thermochronometer, we conducted fission track annealing experiments under isothermal conditions. These experiments evaluated the effects of uranium concentration and zoning on annealing rates. Fission track annealing rates in monazite were also compared to those in Durango apatite. Preliminary results indicate that monazite grains with higher initial track densities anneal at faster rates than those with low initial densities and that fission tracks in monazite anneal at a faster rate than those in apatite. Monazite sand grains were selected from a placer sand deposit, mounted in teflon, and polished. Grains were imaged with electron backscattering to characterize zoning patterns and variations in uranium concentration. Monazite grain mounts were etched in boiling 37% HCl for 50 minutes and fission track densities were determined using standard fission track counting techniques. Durango apatite was etched in 5N HNO3 at room temperature for 20 seconds. After the initial track densities were determined, mounts in one group were annealed at 150 ° C for 1to 6 h. The mounts in a second group were annealed at 200 ° C for 2 hour periods along with mounts of Durango apatite grains. All grains were re-polished prior to each anneal. Upon completion of the experiment, backscatter images were taken of grains from which fission track counts were obtained to verify continuance of concentric zoning. Results of these experiments indicate that annealing rates of fission tracks in monazite vary as a function of uranium concentration. Uranium concentration was constrained on the basis of zoning patterns obtained from electron backscatter images. Fission track densities in grains with initial track densities of approximately 2.4 × 106 tracks/cm2 were reduced at average rate of 16% every two hours. In contrast, track densities in grains with initial track densities of approximately 1.6 × 106 tracks/cm2 average 4.6% density reduction every two hours. In both cases, track density reduction in monazite was faster than the rate of 0.1 % every two hours obtained for apatite. This would indicate that fission track annealing occurs at a lower temperature in monazite than in apatite. Thus monazite would be useful as a low temperature chronometer for determining cooling histories in recently exhumed rocks.

Biomechanical comparison between the rectangular-tunnel and the round-tunnel anterior cruciate ligament reconstruction procedures with a bone-patellar tendon-bone graft.

PubMed

Suzuki, Tomoyuki; Shino, Konsei; Otsubo, Hidenori; Suzuki, Daisuke; Mae, Tatsuo; Fujimiya, Mineko; Yamashita, Toshihiko; Fujie, Hiromichi

2014-10-01

The purpose of this study was to evaluate the effectiveness of 2 anterior cruciate ligament (ACL) reconstruction techniques using a bone-patellar tendon-bone (BPTB) graft with femoral tunnel, either a rectangular tunnel (RET) or a round tunnel (ROT). For experiment 1, nine fresh-frozen human cadaveric knees were tested with a robotic/universal force-moment sensor system to determine the initial optimal tension: the amount of graft tension at 15° of flexion most closely resembling the anterior laxity of a normal knee. The value was estimated by repeatedly measuring anterior laxity when 100 N of anteroposterior drawer load was applied to the knees at 30° of flexion after RET ACL or ROT ACL reconstruction. For experiment 2, six fresh-frozen human cadaveric knees were selected. On the basis of the initial tension determined in experiment 1, RET ACL reconstruction was conducted with the graft tensioned to 10 N, followed by ROT ACL reconstruction on the same knee at 40 N of initial tension, and the biomechanical efficacy of the 2 methods was compared. For experiment 1, the mean laxity match tension at 15° of flexion was 8.6 ± 4.8 N and 34.8 ± 9.2 N for RET- and ROT-reconstructed knees, respectively. For experiment 2, both RET and ROT ACL reconstructions were successful in controlling anterior tibial translation under anterior tibial loads, with the graft initially tensioned to 10 N in the former and to 40 N in the latter. However, the greater tensioning in ROT reconstruction led to proximal, posterior, and lateral displacement of the tibia along with its external and valgus rotation. The RET ACL-reconstructed knee more closely resembled the normal knee in biomechanical behavior. Although ROT reconstruction successfully controlled anterior translation with greater initial tensioning to the graft, the normal positional relation between the tibia and femur was impaired. Rectangular femoral ACL fixation constructs and grafts may prove more efficacious at restoring in vivo ACL kinematics than round femoral tunnels. Copyright © 2014 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

OECD 2-D Core Concrete Interaction (CCI) tests : CCI-2 test plan, Rev. 0 January 31, 2004.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farmer, M. T.; Kilsdonk, D. J.; Lomperski, S.

The Melt Attack and Coolability Experiments (MACE) program addressed the issue of the ability of water to cool and thermally stabilize a molten core-concrete interaction when the reactants are flooded from above. These tests provided data regarding the nature of corium interactions with concrete, the heat transfer rates from the melt to the overlying water pool, and the role of noncondensable gases in the mixing processes that contribute to melt quenching. As a follow-on program to MACE, The Melt Coolability and Concrete Interaction Experiments (MCCI) project is conducting reactor material experiments and associated analysis to achieve the following objectives: (1)more » resolve the ex-vessel debris coolability issue through a program that focuses on providing both confirmatory evidence and test data for the coolability mechanisms identified in MACE integral effects tests, and (2) address remaining uncertainties related to long-term two-dimensional molten core-concrete interactions under both wet and dry cavity conditions. Achievement of these two program objectives will demonstrate the efficacy of severe accident management guidelines for existing plants, and provide the technical basis for better containment designs for future plants. In terms of satisfying these objectives, the Management Board (MB) approved the conduct of two long-term 2-D Core-Concrete Interaction (CCI) experiments designed to provide information in several areas, including: (i) lateral vs. axial power split during dry core-concrete interaction, (ii) integral debris coolability data following late phase flooding, and (iii) data regarding the nature and extent of the cooling transient following breach of the crust formed at the melt-water interface. The first of these two tests, CCI-1, was conducted on December 19, 2003. This test investigated the interaction of a fully oxidized 400 kg PWR core melt, initially containing 8 wt % calcined siliceous concrete, with a specially designed two-dimensional siliceous concrete test section with an initial cross-sectional area of 50 cm x 50 cm. The second of these two planned tests, CCI-2, will be conducted with a nearly identical test facility and experiment boundary conditions, but with a Limestone/Common Sand (LCS) concrete test section to investigate the effect of concrete type on the two-dimensional core-concrete interaction and debris cooling behavior. The objective of this report is to provide the overall test plan for CCI-2 to enable pretest calculations to be carried out. The report begins by providing a summary description of the CCI-2 test apparatus, followed by a description of the planned test operating procedure. Overall specifications for CCI-2 are provided in Table 1-1.« less

Insulin initiation status of primary care physicians in Turkey, barriers to insulin initiation and knowledge levels about insulin therapy: A multicenter cross-sectional study.

PubMed

Ates, Elif; Set, Turan; Saglam, Zuhal; Tekin, Nil; Karatas Eray, Irep; Yavuz, Erdinc; Sahin, Mustafa Kursat; Selcuk, Engin Burak; Cadirci, Dursun; Cubukcu, Mahcube

2017-10-01

Our aim was to evaluate the insulin initiation status, barriers to insulin initiation and knowledge levels about treatment administered by primary care physicians (PCP). We conducted our study in accordance with a multicenter, cross-sectional design in Turkey, between July 2015 and July 2016. A questionnaire inquiring demographic features, status of insulin initiation, obstacles to insulin initiation and knowledge about therapy of the PCPs was administered during face-to-face interviews. 84 PCPs (19%) (n=446, mean age=41.5±8.4years, 62.9% male and 90.0% ministry certified family physicians) initiated insulin therapy in the past. Most of the stated primary barriers (51.9%, n=230) were due to the physicians. The most relevant barrier was "lack of clinical experience" with a rate of 19% (n=84 of the total). The average total knowledge score was 5.7±2.0 for the family medicine specialist, and 3.8±2.1 for the ministry certified family physicians (p=0.000, maximum knowledge score could be 10). The status of insulin initiation in Turkey by the primary care physicians is inadequate. Medical education programs and health care systems may require restructuring to facilitate insulin initiation in primary care. Copyright © 2017 Primary Care Diabetes Europe. Published by Elsevier Ltd. All rights reserved.

Transitions in the communication experiences of tracheostomised patients in intensive care: a qualitative descriptive study.

PubMed

Flinterud, Stine Irene; Andershed, Birgitta

2015-08-01

To describe how tracheostomised patients in intensive care experience acts of communication and to better understand their experiences in the context of the transitions theory. Waking up in an intensive care unit unable to speak because of mechanical ventilation can be challenging. Communication aids are available, but patients still report difficulties communicating. Investigating how mechanically ventilated patients experience communication in the context of the transitions theory might elucidate new ways of supporting them during their transitions while being ventilated. A qualitative, descriptive design. Eleven patients who had previously been tracheostomised in an intensive care unit were included in this quality improvement project conducted in a university hospital in Norway. Participants were tracheostomised from 3-27 days. Semistructured interviews were conducted from June 2013-August 2013, 3-18 months after hospital discharge. Transcripts were analysed using inductive content analysis. Participants reported a great diversity of emotions and experiences attempting to communicate while being tracheostomised. One overarching theme emerging from the analysis was the 'Experience of caring and understanding despite having uncomfortable feelings due to troublesome communication.' The theme consists of three categories. The category 'Emotionally challenging' shows that patients struggled initially. With time, their coping improved, as revealed in the category 'The experience changes with time.' Despite difficulties, participants described positive experiences, as shown in the category 'Successful communication.' The importance of patients experiencing caring and understanding despite their difficult situation constitutes the core finding. The findings suggest that participants went through different transitions. Some reached the end of their transition, experiencing increased stability. Despite challenges with communication, participants reported that caring and safety provided by health care professionals were significant experiences. They viewed nonverbal communication as being very important. © 2015 John Wiley & Sons Ltd.

Identifying sensitive areas of adaptive observations for prediction of the Kuroshio large meander using a shallow-water model

NASA Astrophysics Data System (ADS)

Zou, Guang'an; Wang, Qiang; Mu, Mu

2016-09-01

Sensitive areas for prediction of the Kuroshio large meander using a 1.5-layer, shallow-water ocean model were investigated using the conditional nonlinear optimal perturbation (CNOP) and first singular vector (FSV) methods. A series of sensitivity experiments were designed to test the sensitivity of sensitive areas within the numerical model. The following results were obtained: (1) the eff ect of initial CNOP and FSV patterns in their sensitive areas is greater than that of the same patterns in randomly selected areas, with the eff ect of the initial CNOP patterns in CNOP sensitive areas being the greatest; (2) both CNOP- and FSV-type initial errors grow more quickly than random errors; (3) the eff ect of random errors superimposed on the sensitive areas is greater than that of random errors introduced into randomly selected areas, and initial errors in the CNOP sensitive areas have greater eff ects on final forecasts. These results reveal that the sensitive areas determined using the CNOP are more sensitive than those of FSV and other randomly selected areas. In addition, ideal hindcasting experiments were conducted to examine the validity of the sensitive areas. The results indicate that reduction (or elimination) of CNOP-type errors in CNOP sensitive areas at the initial time has a greater forecast benefit than the reduction (or elimination) of FSV-type errors in FSV sensitive areas. These results suggest that the CNOP method is suitable for determining sensitive areas in the prediction of the Kuroshio large-meander path.

The role and fate of inorganic nitrogen species during UVA/TiO₂ disinfection.

PubMed

Zuo, XiaoJun; Hu, Jiangyong; Chen, MinDong

2015-09-01

Inorganic nitrogen species have three states including ammonia nitrogen (NH4(+)/NH3), nitrite (NO2(-)) and nitrate (NO3(-)) and are often found in the disinfection system. However, no available literature could be found on their role and fate in photocatalytic disinfection systems. In this study, batch experiments were conducted to investigate bacteria inactivation, H2O2 generated and inorganic nitrogen variation to understand the role and fate of inorganic nitrogen species during UVA/TiO2 disinfection and evaluate effects of initial pH and bacteria levels on the role and fate. NH4(+)/NH3 and NO2(-) inhibited the photocatalytic disinfection process obviously. It could be confirmed through that H2O2 yield used for pathogen inactivation was dependent on NH4(+)/NH3 and NO2(-) levels. The NH4(+)/NH3 remaining, NH4(+) remaining and NO3(-) yields in only NH4(+)/NH3 photocatalytic oxidation experiments were obviously different from the corresponding values in the photocatalytic disinfection experiments with NH4(+)/NH3, which confirmed that photocatalytic disinfection had an obvious effect on the fate of NH4(+)/NH3. However, photocatalytic disinfection had slight effects on the fate of NO2(-) and NO3(-). Escherischia coli inactivation rate was the highest in neutral solutions (Initial pH 7) while the lowest in alkaline solutions (Initial pH 8.5). The decrease of NH4(+)/NH3 in alkaline solutions was the most significant. In turn, the photocatalysis of NO2(-) was more evident in acidic solutions. E. coli inactivation was reduced with the increase of initial E. coli concentrations. The initial bacteria concentrations significantly influenced the increase of NH4(+)/NH3, NH4(+) and NO3(-), but slightly impacted the decrease of NO2(-). Copyright © 2015 Elsevier Ltd. All rights reserved.

Graduate-Assistant Athletic Trainers' Perceptions of Professional Socialization in the Collegiate Setting: Part I

PubMed Central

Thrasher, Ashley B.; Walker, Stacy E.; Hankemeier, Dorice A.; Mulvihill, Thalia

2016-01-01

Context: Many newly credentialed athletic trainers (ATs) pursue graduate assistantships, which allow them to gain experience while being supervised by an experienced AT. The graduate-assistant (GA) ATs' perception of their socialization process into the collegiate setting is unknown. Objective: To explore the professional socialization of GAs in the collegiate setting. Design: Qualitative study. Setting: Phone interviews. Patients or Other Participants: A total of 19 collegiate GAs (15 women, 4 men; average age = 23 ± 0.15 years; National Collegiate Athletic Association Division I = 13, II = 3, III = 2; National Association of Intercollegiate Athletics = 2; postprofessional athletic training program = 6) participated. Data Collection and Analysis: Data were collected via phone interviews and transcribed verbatim. Interviews were conducted until data saturation occurred. Data were analyzed through phenomenologic reduction. Trustworthiness was established via member checks and peer review. Results: Four themes emerged: (1) role identity, (2) initial entry into role, (3) maturation, and (4) success. Before beginning their role, participants envisioned the assistantship as a way to gain independent experience while being mentored. They perceived themselves as the primary care providers for their athletic teams. Those who were immediately immersed into clinical practice adapted to their role quickly despite experiencing stress initially. Participants felt that a formal orientation process and a policies and procedures manual would have alleviated some of the initial stress. The GAs matured as they practiced clinically and developed confidence as they gained experience. Personal attributes, experience, and peer and supervisor support contributed to perceived success as GAs. Factors that hindered perceived success were lack of confidence, an unsupportive environment, and long hours. Conclusions: When looking for graduate assistantships, ATs should seek a position that allows them to practice independently and provides didactic educational opportunities while aligning with their athletic training philosophies. PMID:27831745

First Plasma Results from the Levitated Dipole Experiment

NASA Astrophysics Data System (ADS)

Garnier, Darren T.

2005-04-01

On August 13, 2004, the first plasma physics experiments were conducted using the Levitated Dipole Experiment(LDX)http://www.psfc.mit.edu/ldx/. LDX was built at MIT's Plasma Science and Fusion Center as a joint research project of Columbia University and MIT. LDX is a first-of-its-kind experiment incorporating three superconducting magnets and exploring the physics of high-temperature plasma confined by dipole magnetic fields, similar to planetary magnetospheres. It will test recent theories that suggest that stable, high-β plasma can be confined without good curvature or magnetic shear, instead using plasma compressibility to provide stability. (Plasma β is the ratio of plasma pressure to magnetic pressure.) In initial experiments, 750 kA of current was induced in the dipole coil which was physically supported in the center of the 5 m diameter vacuum chamber. Deuterium plasma discharges, lasting from 4 to 10 seconds, were formed with multi-frequency ECRH microwave heating of up to 6.2 kW. Each plasma contained a large fraction of energetic and relativistic electrons that created a significant pressure that caused outward expansion of the magnetic field. Reconstruction of the magnetic equilibrium from external magnetic diagnostics indicate local peak plasma β 7 %. Along with an overview of the LDX device, results from numerous diagnostics operating during this initial supported campaign measuring the basic plasma parameters will be presented. In addition, observations of instabilities leading to rapid plasma loss and the effects of changing plasma compressibility will be explored.

Scene perception in posterior cortical atrophy: categorization, description and fixation patterns.

PubMed

Shakespeare, Timothy J; Yong, Keir X X; Frost, Chris; Kim, Lois G; Warrington, Elizabeth K; Crutch, Sebastian J

2013-01-01

Partial or complete Balint's syndrome is a core feature of the clinico-radiological syndrome of posterior cortical atrophy (PCA), in which individuals experience a progressive deterioration of cortical vision. Although multi-object arrays are frequently used to detect simultanagnosia in the clinical assessment and diagnosis of PCA, to date there have been no group studies of scene perception in patients with the syndrome. The current study involved three linked experiments conducted in PCA patients and healthy controls. Experiment 1 evaluated the accuracy and latency of complex scene perception relative to individual faces and objects (color and grayscale) using a categorization paradigm. PCA patients were both less accurate (faces < scenes < objects) and slower (scenes < objects < faces) than controls on all categories, with performance strongly associated with their level of basic visual processing impairment; patients also showed a small advantage for color over grayscale stimuli. Experiment 2 involved free description of real world scenes. PCA patients generated fewer features and more misperceptions than controls, though perceptual errors were always consistent with the patient's global understanding of the scene (whether correct or not). Experiment 3 used eye tracking measures to compare patient and control eye movements over initial and subsequent fixations of scenes. Patients' fixation patterns were significantly different to those of young and age-matched controls, with comparable group differences for both initial and subsequent fixations. Overall, these findings describe the variability in everyday scene perception exhibited by individuals with PCA, and indicate the importance of exposure duration in the perception of complex scenes.

Implementing universal HIV treatment in a high HIV prevalence and rural South African setting – Field experiences and recommendations of health care providers

PubMed Central

Gumede, Dumile; Boyer, Sylvie; Pillay, Deenan; Dabis, François; Seeley, Janet; Orne-Gliemann, Joanna

2017-01-01

Background We aimed to describe the field experiences and recommendations of clinic-based health care providers (HCP) regarding the implementation of universal antiretroviral therapy (ART) in rural KwaZulu-Natal, South Africa. Methods In Hlabisa sub-district, the local HIV programme of the Department of Health (DoH) is decentralized in 18 clinics, where ART was offered at a CD4 count ≤500 cells/μL from January 2015 to September 2016. Within the ANRS 12249 TasP trial, implemented in part of the sub-district, universal ART (no eligibility criteria) was offered in 11 mobile clinics between March 2012 and June 2016. A cross-sectional qualitative survey was conducted in April–July 2016 among clinic-based nurses and counsellors providing HIV care in the DoH and TasP trial clinics. In total, 13 individual interviews and two focus groups discussions (including 6 and 7 participants) were conducted, audio-recorded, transcribed, and thematically analyzed. Results All HCPs reported an overall good experience of delivering ART early in the course of HIV infection, with most patients willing to initiate ART before being symptomatic. Yet, HCPs underlined that not feeling sick could challenge early ART initiation and adherence, and thus highlighted the need to take time for counselling as an important component to achieve universal ART. HCPs also foresaw logistical challenges of universal ART, and were especially concerned about increasing workload and ART shortage. HCPs finally recommended the need to strengthen the existing model of care to facilitate access to ART, e.g., community-based and integrated HIV services. Conclusions The provision of universal ART is feasible and acceptable according to HCPs in this rural South-African area. However their experiences suggest that universal ART, and more generally the 90-90-90 UNAIDS targets, will be difficult to achieve without the implementation of new models of health service delivery. PMID:29155832

Implementing universal HIV treatment in a high HIV prevalence and rural South African setting - Field experiences and recommendations of health care providers.

PubMed

Plazy, Melanie; Perriat, Delphine; Gumede, Dumile; Boyer, Sylvie; Pillay, Deenan; Dabis, François; Seeley, Janet; Orne-Gliemann, Joanna

2017-01-01

We aimed to describe the field experiences and recommendations of clinic-based health care providers (HCP) regarding the implementation of universal antiretroviral therapy (ART) in rural KwaZulu-Natal, South Africa. In Hlabisa sub-district, the local HIV programme of the Department of Health (DoH) is decentralized in 18 clinics, where ART was offered at a CD4 count ≤500 cells/μL from January 2015 to September 2016. Within the ANRS 12249 TasP trial, implemented in part of the sub-district, universal ART (no eligibility criteria) was offered in 11 mobile clinics between March 2012 and June 2016. A cross-sectional qualitative survey was conducted in April-July 2016 among clinic-based nurses and counsellors providing HIV care in the DoH and TasP trial clinics. In total, 13 individual interviews and two focus groups discussions (including 6 and 7 participants) were conducted, audio-recorded, transcribed, and thematically analyzed. All HCPs reported an overall good experience of delivering ART early in the course of HIV infection, with most patients willing to initiate ART before being symptomatic. Yet, HCPs underlined that not feeling sick could challenge early ART initiation and adherence, and thus highlighted the need to take time for counselling as an important component to achieve universal ART. HCPs also foresaw logistical challenges of universal ART, and were especially concerned about increasing workload and ART shortage. HCPs finally recommended the need to strengthen the existing model of care to facilitate access to ART, e.g., community-based and integrated HIV services. The provision of universal ART is feasible and acceptable according to HCPs in this rural South-African area. However their experiences suggest that universal ART, and more generally the 90-90-90 UNAIDS targets, will be difficult to achieve without the implementation of new models of health service delivery.

AMO EXPRESS: A Command and Control Experiment for Crew Autonomy Onboard the International Space Station

NASA Technical Reports Server (NTRS)

Stetson, Howard K.; Frank, Jeremy; Cornelius, Randy; Haddock, Angie; Wang, Lui; Garner, Larry

2015-01-01

NASA is investigating a range of future human spaceflight missions, including both Mars-distance and Near Earth Object (NEO) targets. Of significant importance for these missions is the balance between crew autonomy and vehicle automation. As distance from Earth results in increasing communication delays, future crews need both the capability and authority to independently make decisions. However, small crews cannot take on all functions performed by ground today, and so vehicles must be more automated to reduce the crew workload for such missions. NASA's Advanced Exploration Systems Program funded Autonomous Mission Operations (AMO) project conducted an autonomous command and control experiment on-board the International Space Station that demonstrated single action intelligent procedures for crew command and control. The target problem was to enable crew initialization of a facility class rack with power and thermal interfaces, and involving core and payload command and telemetry processing, without support from ground controllers. This autonomous operations capability is enabling in scenarios such as initialization of a medical facility to respond to a crew medical emergency, and representative of other spacecraft autonomy challenges. The experiment was conducted using the Expedite the Processing of Experiments for Space Station (EXPRESS) rack 7, which was located in the Port 2 location within the U.S Laboratory onboard the International Space Station (ISS). Activation and deactivation of this facility is time consuming and operationally intensive, requiring coordination of three flight control positions, 47 nominal steps, 57 commands, 276 telemetry checks, and coordination of multiple ISS systems (both core and payload). Utilization of Draper Laboratory's Timeliner software, deployed on-board the ISS within the Command and Control (C&C) computers and the Payload computers, allowed development of the automated procedures specific to ISS without having to certify and employ novel software for procedure development and execution. The procedures contained the ground procedure logic and actions as possible to include fault detection and recovery capabilities.

Potential role of salinity in ENSO and MJO predictions

NASA Astrophysics Data System (ADS)

Zhu, J.; Kumar, A.; Murtugudde, R. G.; Xie, P.

2017-12-01

Studies have suggested that ocean salinity can vary in response to ENSO and MJO. For example, during an El Niño event, sea surface salinity decreases in the western and central equatorial Pacific, as a result of zonal advection of low salinity water by anomalous eastward surface currents, and to a lesser extent as a result of a rainfall excess associated with atmospheric convection and warm water displacements. However, the effect of salinity on ENSO and MJO evolutions and their forecasts has been less explored. In this analysis, we explored the potential role of salinity in ENSO and MJO predictions by conducting sensitivity experiments with NCEP CFSv2. Firstly, two forecasts experiments are conducted to explore its effect on ENSO predictions, in which the interannual variability of salinity in the ocean initial states is either included or excluded. Comparisons suggested that the salinity variability is essential to correctly forecast the 2007/08 La Niña starting from April 2007. With realistic salinity initial states, the tendency to decay of the subsurface cold condition during the spring and early summer 2007 was interrupted by positive salinity anomalies in the upper central Pacific, which working together with the Bjerknes positive feedback, contributed to the development of the La Niña event. Our study suggests that ENSO forecasts will benefit from more accurate sustained salinity observations having large-scale spatial coverage. We also assessed the potential role of salinity in MJO by evaluating a long coupled free run that has a relatively realistic MJO simulation and a set of predictability experiment, both based on CFSv2. Diagnostics of the free run suggest that, while the intraseasonal SST variations lead convections by a quarter cycle, they are almost in phase only with changes in barrier layer thickness, thereby suggesting an active role of salinity on SST. Its effect on MJO predictions is further explored by controlling the surface salinity feedback during the predictability experiments.

Initial Results from the 2002 Gulf of California Conjugate Margin Seismic Experiment

NASA Astrophysics Data System (ADS)

Holbrook, S.; Lizarralde, D.; Kent, G.; Harding, A.; Fletcher, J.; Gonzalez-Fernandez, A.; Umhoefer, P.; Axen, G.

2003-04-01

The Gulf of California, which marks the ongoing separation of Baja California from mainland Mexico, is one of the few locales where active continental breakup can be studied along unambiguous flow lines that join clear conjugate margin pairs. In Fall 2002, we conducted an onshore-offshore seismic experiment across the conjugate rifted margins of the Gulf of California in several rift segments. The joint U.S.-Mexico project, sponsored principally by the MARGINS program of the U.S. National Science Foundation, aimed to image crustal structure across conjugate margins of four major basins to determine the modes of extension and the influence of sedimentation and magmatism on breakup. Here we present an overview of the experiment, which was substantially altered at sea due to concerns for marine-mammal safety, and present some preliminary findings. Three flow-line transects were acquired, in the Alarcon Basin, the Guaymas Basin, and between Cabo and Tres Marias Islands. In addition, a fourth transect across the Baja Peninsula was acquired. Data acquired included (1) multichannel seismic reflection data using the R/V Ewing’s 20-gun array and 480-channel, 6-km-long streamer, (2) wide-angle reflection/refraction data recorded on ocean-bottom seismometers, from 206 deployments conducted by the R/V New Horizon, and (3) onshore-offshore data recorded on portable seismometers deployed up to 100 km inland on all transects. Initial results from the experiment include (1) clear evidence for asymmetric basement structure on the conjugate rifted margins and across the active mid-ocean spreading center, of the Guaymas Basin, (2) the suggestion of substantial magmatism in an early failed rift of the Alarcon Basin, and (3) active subduction beneath the margin at the Tres Marias islands. In addition, we will discuss new procedures for mitigating effects on marine mammals that may have a significant impact on future U.S.-sponsored seismic reflection activities.

Effects of space allocations and energy levels on growth performance and nutrient digestibility in growing and finishing pigs.

PubMed

Lei, X J; Yan, L; Kim, Y M; Kim, I H

2018-02-01

Two experiments were conducted to investigate effects of different space allocations and different dietary metabolizable energy (ME) levels on growth performance and nutrient digestibility in growing and finishing pigs. In experiment 1, a total of 84 growing pigs [(Yorkshire × Landrace) × Duroc] with an initial body weight (BW) of 27.10 ± 1.60 kg were used in a 5-week trial. Pigs were blocked based on initial BW into a 2 × 2 factorial design with the following factors: (i) 0.60 or 0.80 m 2 /pig space allocations; and (ii) 3,400 or 3,550 kcal/kg ME of diets. In experiment 2, a total of 84 finishing pigs with an initial BW of 67.43 ± 1.97 kg were used in a 10-week trial. Pigs were allotted based on initial BW into a 2 × 2 factorial design with the following factors: (i) 0.81 or 1.08 m 2 /pig space allocations; and (ii) 3,300 or 3,450 kcal/kg ME of diet. In experiment 1, high ME diet improved gain-to-feed ratio (G:F) in pigs with low space allocation but not in pigs in high space allocation (p < .05). Additionally, high ME diet increased apparent total tract digestibility (ATTD) of nitrogen in low space allocation but decreased ATTD of nitrogen in high space allocation (p < .05). In experiment 2, high ME diet improved average daily gain (ADG) and G:F in early-finishing pigs with low space allocation but not in pigs with high space allocation (p < .05). In conclusion, the provision of high ME diets was not enough to overcome the reduction in growth performance due to low space allocation but can improve feed efficiency in growing pigs and daily gain and feed efficiency early-finishing pigs. © 2017 Blackwell Verlag GmbH.

Phonological Planning during Sentence Production: Beyond the Verb.

PubMed

Schnur, Tatiana T

2011-01-01

The current study addresses the extent of phonological planning during spontaneous sentence production. Previous work shows that at articulation, phonological encoding occurs for entire phrases, but encoding beyond the initial phrase may be due to the syntactic relevance of the verb in planning the utterance. I conducted three experiments to investigate whether phonological planning crosses multiple grammatical phrase boundaries (as defined by the number of lexical heads of phrase) within a single phonological phrase. Using the picture-word interference paradigm, I found in two separate experiments a significant phonological facilitation effect to both the verb and noun of sentences like "He opens the gate." I also altered the frequency of the direct object and found longer utterance initiation times for sentences ending with a low-frequency vs. high-frequency object offering further support that the direct object was phonologically encoded at the time of utterance initiation. That phonological information for post-verbal elements was activated suggests that the grammatical importance of the verb does not restrict the extent of phonological planning. These results suggest that the phonological phrase is unit of planning, where all elements within a phonological phrase are encoded before articulation. Thus, consistent with other action sequencing behavior, there is significant phonological planning ahead in sentence production.

Empirical evaluation of inhibitory product, substrate, and enzyme effects during the enzymatic saccharification of lignocellulosic biomass.

PubMed

Smith, Benjamin T; Knutsen, Jeffrey S; Davis, Robert H

2010-05-01

The cellulose hydrolysis kinetics during batch enzymatic saccharification are typified by a rapid initial rate that subsequently decays, resulting in incomplete conversion. Previous studies suggest that changes associated with the solution, substrate, or enzymes may be responsible. In this work, kinetic experiments were conducted to determine the relative magnitude of these effects. Pretreated corn stover (PCS) was used as a lignocellulosic substrate likely to be found in a commercial saccharification process, while Avicel and Kraft lignin were used to create model substrates. Glucose inhibition was observed by spiking the reaction slurry with glucose during initial-rate experiments. Increasing the glucose concentration from 7 to 48 g/L reduced the cellulose conversion rate by 94%. When product sugars were removed using ultrafiltration with a 10 kDa membrane, the glucose-based conversion increased by 9.5%. Reductions in substrate reactivity with conversion were compared directly by saccharifying PCS and Avicel substrates that had been pre-reacted to different conversions. Reaction of substrate with a pre-conversion of 40% resulted in about 40% reduction in the initial rate of saccharification, relative to fresh substrate with identical cellulose concentration. Overall, glucose inhibition and reduced substrate reactivity appear to be dominant factors, whereas minimal reductions of enzyme activity were observed.

40 CFR 60.4400 - How do I conduct the initial and subsequent performance tests, regarding NOX?

Code of Federal Regulations, 2010 CFR

2010-07-01

... subsequent performance tests, regarding NOX? 60.4400 Section 60.4400 Protection of Environment ENVIRONMENTAL... Standards of Performance for Stationary Combustion Turbines Performance Tests § 60.4400 How do I conduct the initial and subsequent performance tests, regarding NOX? (a) You must conduct an initial performance test...

40 CFR 60.4400 - How do I conduct the initial and subsequent performance tests, regarding NOX?

Code of Federal Regulations, 2013 CFR

2013-07-01

... subsequent performance tests, regarding NOX? 60.4400 Section 60.4400 Protection of Environment ENVIRONMENTAL... Standards of Performance for Stationary Combustion Turbines Performance Tests § 60.4400 How do I conduct the initial and subsequent performance tests, regarding NOX? (a) You must conduct an initial performance test...

40 CFR 60.4400 - How do I conduct the initial and subsequent performance tests, regarding NOX?

Code of Federal Regulations, 2011 CFR

2011-07-01

... subsequent performance tests, regarding NOX? 60.4400 Section 60.4400 Protection of Environment ENVIRONMENTAL... Standards of Performance for Stationary Combustion Turbines Performance Tests § 60.4400 How do I conduct the initial and subsequent performance tests, regarding NOX? (a) You must conduct an initial performance test...

40 CFR 60.4400 - How do I conduct the initial and subsequent performance tests, regarding NOX?

Code of Federal Regulations, 2012 CFR

2012-07-01

... subsequent performance tests, regarding NOX? 60.4400 Section 60.4400 Protection of Environment ENVIRONMENTAL... Standards of Performance for Stationary Combustion Turbines Performance Tests § 60.4400 How do I conduct the initial and subsequent performance tests, regarding NOX? (a) You must conduct an initial performance test...

40 CFR 60.4400 - How do I conduct the initial and subsequent performance tests, regarding NOX?

Code of Federal Regulations, 2014 CFR

2014-07-01

... subsequent performance tests, regarding NOX? 60.4400 Section 60.4400 Protection of Environment ENVIRONMENTAL... Standards of Performance for Stationary Combustion Turbines Performance Tests § 60.4400 How do I conduct the initial and subsequent performance tests, regarding NOX? (a) You must conduct an initial performance test...

40 CFR 60.2141 - By what date must I conduct the initial air pollution control device inspection?

Code of Federal Regulations, 2013 CFR

2013-07-01

... air pollution control device inspection? 60.2141 Section 60.2141 Protection of Environment... Compliance Requirements § 60.2141 By what date must I conduct the initial air pollution control device inspection? (a) The initial air pollution control device inspection must be conducted within 60 days after...

40 CFR 60.2141 - By what date must I conduct the initial air pollution control device inspection?

Code of Federal Regulations, 2014 CFR

2014-07-01

... air pollution control device inspection? 60.2141 Section 60.2141 Protection of Environment... Compliance Requirements § 60.2141 By what date must I conduct the initial air pollution control device inspection? (a) The initial air pollution control device inspection must be conducted within 60 days after...

Convective initiation in the vicinity of the subtropical Andes

NASA Astrophysics Data System (ADS)

Rasmussen, K. L.; Houze, R.

2014-12-01

Extreme convection tends to form in the vicinity of mountain ranges, and the Andes in subtropical South America help spawn some of the most intense convection in the world. An investigation of the most intense storms for 11 years of TRMM Precipitation Radar (PR) data shows a tendency for squall lines to initiate and develop in this region with the canonical leading convective line/trailing stratiform structure. The synoptic environment and structures of the extreme convection and MCSs in subtropical South America are similar to those found in other regions of the world, especially the United States. In subtropical South America, however, the topographical influence on the convective initiation and maintenance of the MCSs is unique. A capping inversion in the lee of the Andes is important in preventing premature triggering. The Andes and other mountainous terrain of Argentina focus deep convective initiation in a narrow region. Subsequent to initiation, the convection often evolves into propagating mesoscale convective systems similar to those seen over the Great Plains of the U. S. and produces damaging tornadoes, hail, and floods across a wide agricultural region. Numerical simulations conducted with the NCAR Weather Research and Forecasting (WRF) Model extend the observational analysis and provide an objective evaluation of storm initiation, terrain effects, and development mechanisms. The simulated mesoscale systems closely resemble the storm structures seen by the TRMM Precipitation Radar as well as the overall shape and character of the storms shown in GOES satellite data. A sensitivity experiment with different configurations of topography, including both decreasing and increasing the height of the Andes Mountains, provides insight into the significant influence of orography in focusing convective initiation in this region. Lee cyclogenesis and a strong low-level jet are modulated by the height of the Andes Mountains and directly affect the character, intensity, and spatial distribution of the convective systems. A new conceptual model for convective initiation in subtropical South America that integrates the results of the topographic sensitivity experiments will be presented.

Trajectories of risk for early sexual activity and early substance use in the Fast Track prevention program.

PubMed

2014-02-01

Children who exhibit early-starting conduct problems are more likely than their peers to initiate sexual activity and substance use at an early age, experience pregnancy, and contract a sexually-transmitted disease [STD], placing them at risk for HIV/AIDS. Hence, understanding the development of multi-problem profiles among youth with early-starting conduct problems may benefit the design of prevention programs. In this study, 1,199 kindergarten children (51% African American; 47% European American; 69% boys) over-sampled for high rates of aggressive-disruptive behavior problems were followed through age 18. Latent class analyses (LCA) were used to define developmental profiles associated with the timing of initiation of sexual activity, tobacco and alcohol/drug use and indicators of risky adolescent sex (e.g. pregnancy and STD). Half of the high-risk children were randomized to a multi-component preventive intervention (Fast Track). The intervention did not significantly reduce membership in the classes characterized by risky sex practices. However, additional analyses examined predictors of poor outcomes, which may inform future prevention efforts.

Modeling of zero gravity venting: Studies of two-phase heat transfer under reduced gravity

NASA Technical Reports Server (NTRS)

Merte, H., Jr.

1986-01-01

The objective is to predict the pressure response of a saturated liquid-vapor system when undergoing a venting or depressurization process in zero gravity at low vent rates. An experimental investigation of the venting of cylindrical containers partially filled with initially saturated liquids was previously conducted under zero-gravity conditions and compared with an analytical model which incorporated the effect of interfacial mass transfer on the ullage pressure response during venting. A new model is presented to improve the estimation of the interfacial mass transfer. Duhammel's superposition integral is incorporated to approximate the transient temperature response of the interface, treating the liquid as a semi-infinite solid with conduction heat transfer. Account is also taken of the condensation taking place within the bulk of a saturated vapor as isentropic expansion takes place. Computational results are presented for the venting of R-11 from a given vessel and initial state for five different venting rates over a period of three seconds, and compared to prior NASA experiments. An improvement in the prediction of the final pressure takes place, but is still considerably below the measurements.

The South Fork Experimental Watershed: Soil moisture and precipitation network for satellite validation

NASA Astrophysics Data System (ADS)

Cosh, M. H.; Prueger, J. H.; McKee, L.; Bindlish, R.

2013-12-01

A recently deployed long term network for the study of soil moisture and precipitation was deployed in north central iowa, in cooperation between USDA and NASA. This site will be a joint calibration/validation network for the Soil Moisture Active Passive (SMAP) and Global Precipitation Measurement (GPM) missions. At total of 20 dual gauge precipitation gages were established across a watershed landscape with an area of approximately 600 km2. In addition, four soil moisture probes were installed in profile at 5, 10, 20, and 50 cm. The network was installed in April of 2013, at the initiation of the Iowa Flood Study (IFloodS) which was a six week intensive ground based radar observation period, conducted in coordination with NASA and the University of Iowa. This site is a member watershed of the Group on Earth Observations Joint Experiments on Crop Assessment and Monitoring (GEO-JECAM) program. A variety of quality control procedures are examined and spatial and temporal stability aspects of the network are examined. Initial comparisons of the watershed to soil moisture estimates from satellites are also conducted.

Exploring Health Information Exchange Implementation Using Qualitative Assessments of Nursing Home Leaders

PubMed Central

Alexander, Gregory L.; Popejoy, Lori; Lyons, Vanessa; Shumate, Sue; Mueller, Jessica; Galambos, Colleen; Vogelsmeier, Amy; Rantz, Marilyn; Flesner, Marcia

2016-01-01

Objectives Limited research exists on nursing home information technologies, such as health information exchange (HIE) systems. Capturing the experiences of early HIE adopters provides vital information about how these systems are used. In this study, we conduct a secondary analysis of qualitative data captured during interviews with 15 nursing home leaders representing 14 nursing homes in the midwestern United States that are part of the Missouri Quality Improvement Initiative (MOQI) national demonstration project. Methods The interviews were conducted as part of an external evaluation of the HIE vendor contracting with the MOQI initiative with the purpose of understanding the challenges and successes of HIE implementation, with a particular focus on Direct HIE services. Results Emerging themes included (1) incorporating HIE into existing work processes, (2) participation inside and outside the facility, (3) appropriate training and retraining, (4) getting others to use the HIE, (5) getting the HIE operational, and 6) putting policies for technology into place. Discussion Three essential areas should be considered for nursing homes considering HIE adoption: readiness to adopt technology, availability of technology resources, and matching of new clinical workflows. PMID:27843423

PIE on Safety-Tested AGR-1 Compact 5-1-1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hunn, John D.; Morris, Robert Noel; Baldwin, Charles A.

Post-irradiation examination (PIE) is being performed in support of tristructural isotropic (TRISO) coated particle fuel development and qualification for High-Temperature Gas-cooled Reactors (HTGRs). AGR-1 was the first in a series of TRISO fuel irradiation experiments initiated in 2006 under the Advanced Gas Reactor (AGR) Fuel Development and Qualification Program; this work continues to be funded by the Department of Energy's Office of Nuclear Energy as part of the Advanced Reactor Technologies (ART) initiative. AGR-1 fuel compacts were fabricated at Oak Ridge National Laboratory (ORNL) in 2006 and irradiated for three years in the Idaho National Laboratory (INL) Advanced Test Reactormore » (ATR) to demonstrate and evaluate fuel performance under HTGR irradiation conditions. PIE is being performed at INL and ORNL to study how the fuel behaved during irradiation, and to examine fuel performance during exposure to elevated temperatures at or above temperatures that could occur during a depressurized conduction cooldown event. This report summarizes safety testing of irradiated AGR-1 Compact 5-1-1 in the ORNL Core Conduction Cooldown Test Facility (CCCTF) and post-safety testing PIE.« less

Numerical Study of Richtmyer-Meshkov Instability with Re-Shock

NASA Astrophysics Data System (ADS)

Wong, Man Long; Livescu, Daniel; Lele, Sanjiva

2017-11-01

The interaction of a Mach 1.45 shock wave with a perturbed planar interface between two gases with an Atwood number 0.68 is studied through 2D and 3D shock-capturing adaptive mesh refinement (AMR) simulations with physical diffusive and viscous terms. The simulations have initial conditions similar to those in the actual experiment conducted by Poggi et al. [1998]. The development of the flow and evolution of mixing due to the interactions with the first shock and the re-shock are studied together with the sensitivity of various global parameters to the properties of the initial perturbation. Grid resolutions needed for fully resolved and 2D and 3D simulations are also evaluated. Simulations are conducted with an in-house AMR solver HAMeRS built on the SAMRAI library. The code utilizes the high-order localized dissipation weighted compact nonlinear scheme [Wong and Lele, 2017] for shock-capturing and different sensors including the wavelet sensor [Wong and Lele, 2016] to identify regions for grid refinement. First and third authors acknowledge the project sponsor LANL.

“... And Gladly Teach”: The American Hospital Association's Experience in Conducting Institutes on Hospital Librarianship

PubMed Central

Yast, Helen

1964-01-01

As part of its overall educational program, the American Hospital Association has since 1959 conducted three institutes on hospital librarianship to meet the demand for more competent librarians in medical, nursing school, and patients' libraries. The purpose of such institutes is to teach the basic elements of library science to untrained personnel in hospital libraries. Discussed are steps in initiating an institute; factors determining length, date, and place; financing; publicity; choice and responsibility of local advisory committee; program content; qualifications of instructors; characteristics of registrants; materials for distribution; evaluations. Details of the most recent institute are outlined. A summary of problems still facing this type of educational program and suggestions for future improvements conclude the paper. PMID:14119309

Nano-Electrochemistry and Nano-Electrografting with an Original Combined AFM-SECM

PubMed Central

Ghorbal, Achraf; Grisotto, Federico; Charlier, Julienne; Palacin, Serge; Goyer, Cédric; Demaille, Christophe; Ben Brahim, Ammar

2013-01-01

This study demonstrates the advantages of the combination between atomic force microscopy and scanning electrochemical microscopy. The combined technique can perform nano-electrochemical measurements onto agarose surface and nano-electrografting of non-conducting polymers onto conducting surfaces. This work was achieved by manufacturing an original Atomic Force Microscopy-Scanning ElectroChemical Microscopy (AFM-SECM) electrode. The capabilities of the AFM-SECM-electrode were tested with the nano-electrografting of vinylic monomers initiated by aryl diazonium salts. Nano-electrochemical and technical processes were thoroughly described, so as to allow experiments reproducing. A plausible explanation of chemical and electrochemical mechanisms, leading to the nano-grafting process, was reported. This combined technique represents the first step towards improved nano-processes for the nano-electrografting. PMID:28348337

Heat conduction in periodic laminates with probabilistic distribution of material properties

NASA Astrophysics Data System (ADS)

Ostrowski, Piotr; Jędrysiak, Jarosław

2017-04-01

This contribution deals with a problem of heat conduction in a two-phase laminate made of periodically distributed micro-laminas along one direction. In general, the Fourier's Law describing the heat conduction in a considered composite has highly oscillating and discontinuous coefficients. Therefore, the tolerance averaging technique (cf. Woźniak et al. in Thermomechanics of microheterogeneous solids and structures. Monografie - Politechnika Łódzka, Wydawnictwo Politechniki Łódzkiej, Łódź, 2008) is applied. Based on this technique, the averaged differential equations for a tolerance-asymptotic model are derived and solved analytically for given initial-boundary conditions. The second part of this contribution is an investigation of the effect of material properties ratio ω of two components on the total temperature field θ, by the assumption that conductivities of micro-laminas are not necessary uniquely described. Numerical experiments (Monte Carlo simulation) are executed under assumption that ω is a random variable with a fixed probability distribution. At the end, based on the obtained results, a crucial hypothesis is formulated.

Electric conductance of a mechanically strained molecular junction from first principles: Crucial role of structural relaxation and conformation sampling

NASA Astrophysics Data System (ADS)

Nguyen, Huu Chuong; Szyja, Bartłomiej M.; Doltsinis, Nikos L.

2014-09-01

Density functional theory (DFT) based molecular dynamics simulations have been performed of a 1,4-benzenedithiol molecule attached to two gold electrodes. To model the mechanical manipulation in typical break junction and atomic force microscopy experiments, the distance between two electrodes was incrementally increased up to the rupture point. For each pulling distance, the electric conductance was calculated using the DFT nonequilibrium Green's-function approach for a statistically relevant sample of configurations extracted from the simulation. With increasing mechanical strain, the formation of monoatomic gold wires is observed. The conductance decreases by three orders of magnitude as the initial twofold coordination of the thiol sulfur to the gold is reduced to a single S-Au bond at each electrode and the order in the electrodes is destroyed. Independent of the pulling distance, the conductance was found to fluctuate by at least two orders of magnitude depending on the instantaneous junction geometry.

A comparison of medical students' perceptions of their initial basic clinical training placements in 'new' and established teaching hospitals.

PubMed

Mathers, Jonathan; Parry, Jayne; Scully, Edward; Popovic, Celia

2006-05-01

This study has examined students' perceptions of the factors influencing learning during initial hospital placements and whether differences in perceived experiences were evident between students attending new and established teaching hospitals. Five focus groups were conducted with Year III students at the University of Birmingham Medical School (UBMS): three with students attending three established teaching hospitals and two with students attached to a new teaching hospital (designated as part of the UBMS expansion programme). Extensive variation in student perception of hospital experiences was evident at the level of teaching hospital, teaching firm and individual teacher. Emergent themes were split into two main categories: 'students' perceptions of teaching and the teaching environment' and 'the new hospital learner'. Themes emerging that related to variation in student experience included the amount of structured teaching, enthusiasm of teachers, grade of teachers, specialty of designated firms and the number of students. The new teaching hospital was generally looked upon favourably by students in comparison to established teaching hospitals. Many of the factors influencing student experience relate to themes grouped under the 'new hospital learner', describing the period of adjustment experienced by students during their first encounter with this new learning environment. Interventions to improve student experience might be aimed at organisations and individuals delivering teaching. However, factors contributing to the student experience, such as the competing demand to teaching of heavy clinical workloads, are outside the scope of medical school intervention. In the absence of fundamental change, mechanisms to equip students with 'survival skills' as self-directed hospital learners should also be considered.

Investigation of particle and vapor wall-loss effects on controlled wood-smoke smog-chamber experiments

NASA Astrophysics Data System (ADS)

Bian, Q.; May, A. A.; Kreidenweis, S. M.; Pierce, J. R.

2015-10-01

Smog chambers are extensively used to study processes that drive gas and particle evolution in the atmosphere. A limitation of these experiments is that particles and gas-phase species may be lost to chamber walls on shorter timescales than the timescales of the atmospheric processes being studied in the chamber experiments. These particle and vapor wall losses have been investigated in recent studies of secondary organic aerosol (SOA) formation, but they have not been systematically investigated in experiments of primary emissions from combustion. The semi-volatile nature of combustion emissions (e.g. from wood smoke) may complicate the behavior of particle and vapor wall deposition in the chamber over the course of the experiments due to the competition between gas/particle and gas/wall partitioning. Losses of vapors to the walls may impact particle evaporation in these experiments, and potential precursors for SOA formation from combustion may be lost to the walls, causing underestimations of aerosol yields. Here, we conduct simulations to determine how particle and gas-phase wall losses contributed to the observed evolution of the aerosol during experiments in the third Fire Lab At Missoula Experiment (FLAME III). We use the TwO-Moment Aerosol Sectional (TOMAS) microphysics algorithm coupled with the organic volatility basis set (VBS) and wall-loss formulations to examine the predicted extent of particle and vapor wall losses. We limit the scope of our study to the dark periods in the chamber before photo-oxidation to simplify the aerosol system for this initial study. Our model simulations suggest that over one-third of the initial particle-phase organic mass (41 %) was lost during the experiments, and over half of this particle-organic mass loss was from direct particle wall loss (65 % of the loss) with the remainder from evaporation of the particles driven by vapor losses to the walls (35 % of the loss). We perform a series of sensitivity tests to understand uncertainties in our simulations. Uncertainty in the initial wood-smoke volatility distribution contributes 18 % uncertainty to the final particle-organic mass remaining in the chamber (relative to base-assumption simulation). We show that the total mass loss may depend on the effective saturation concentration of vapor with respect to the walls as these values currently vary widely in the literature. The details of smoke dilution during the filling of smog chambers may influence the mass loss to the walls, and a dilution of ~ 25:1 during the experiments increased particle-organic mass loss by 33 % compared to a simulation where we assume the particles and vapors are initially in equilibrium in the chamber. Finally, we discuss how our findings may influence interpretations of emission factors and SOA production in wood-smoke smog-chamber experiments.

Investigation of particle and vapor wall-loss effects on controlled wood-smoke smog-chamber experiments

NASA Astrophysics Data System (ADS)

Bian, Q.; May, A. A.; Kreidenweis, S. M.; Pierce, J. R.

2015-06-01

Smog chambers are extensively used to study processes that drive gas and particle evolution in the atmosphere. A limitation of these experiments is that particles and gas-phase species may be lost to chamber walls on shorter timescales than the timescales of the atmospheric processes being studied in the chamber experiments. These particle and vapor wall losses have been investigated in recent studies of secondary organic aerosol (SOA) formation, but they have not been systematically investigated in experiments of primary emissions from combustion. The semi-volatile nature of combustion emissions (e.g. from wood smoke) may complicate the behavior of particle and vapor wall deposition in the chamber over the course of the experiments due to the competition between gas/particle and gas/wall partitioning. Losses of vapors to the walls may impact particle evaporation in these experiments, and potential precursors for SOA formation from combustion may be lost to the walls, causing underestimates of aerosol yields. Here, we conduct simulations to determine how particle and gas-phase wall losses contributed to the observed evolution of the aerosol during experiments in the third Fire Lab At Missoula Experiment (FLAME III). We use the TwO-Moment Aerosol Sectional (TOMAS) microphysics algorithm coupled with the organic volatility basis set (VBS) and wall-loss formulations to examine the predicted extent of particle and vapor wall losses. We limit the scope of our study to the dark periods in the chamber before photo-oxidation to simplify the aerosol system for this initial study. Our model simulations suggest that over one third of the initial particle-phase organic mass (36%) was lost during the experiments, and roughly half of this particle organic mass loss was from direct particle wall loss (56% of the loss) with the remainder from evaporation of the particles driven by vapor losses to the walls (44% of the loss). We perform a series of sensitivity tests to understand uncertainties in our simulations. Uncertainty in the initial wood-smoke volatility distribution contributes 23% uncertainty to the final particle organic mass remaining in the chamber (relative to base-assumptions simulation). We show that the total mass loss may depend on the effective saturation concentration of vapor with respect to the walls as these values currently vary widely in the literature. The details of smoke dilution during the filling of smog chambers may influence the mass loss to the walls, and a dilution of ~ 25:1 during the experiments increased particle organic mass loss by 64% compared to a simulation where we assume the particles and vapors are initially in equilibrium in the chamber. Finally, we discuss how our findings may influence interpretations of emission factors and SOA production in wood-smoke smog-chamber experiments.

NASA Graduate Student Researchers Program (GSRP)

NASA Technical Reports Server (NTRS)

Freeman, Frederick G.

1998-01-01

The primary area of research that Dr. Prinzel conducted was concerned with the effects of automation on the ability to perform various tasks which simulated those performed in an airplane cockpit. While automation is generally considered to be a positive addition to the cockpit, it also has some negative effects. The primary negative effect is related to the decrease in the number of tasks the pilot needs to perform. Having less to do can actually result in a decreased ability to be aware of and react to ongoing events, some of which may be critical to flight operations. The research was concerned with the ability of adaptive automation using psychophysiological measures, specifically brain waves (i.e. EEG), to control the degree to which tasks are automated as a function of the subject's level of alertness. Dr. Prinzel conducted and participated in the running of a number of experiments that examined adaptive automation in conjunction with the MultiAttribute Task Battery. Since there has been very little research conducted in this area, experiments needed to be conducted which established basic parameters for future research. The experiments that Dr. Prinzel was involved with examined the optimum number and location of electrode sites for recording EEG, the types of tasks which could readily be automated, the number of tasks which could be controlled by the adaptive automation system, and various EEG recording parameters which affect system functioning. A secondary area in which Dr. Prinzel conducted research concerned performance on vigiliance tasks. This research, while not initially directly related to adaptive automation, does have implication for such systems. Vigilance requires long term monitoring which often leads to the kind of negative effects seen when automation is introduced into a work environment. A third area of research in which Dr. Prinzel conducted research was concerned with gender differences in cognitive functioning and how that related to strategies for performing various tasks.

Comparative study of humic acid removal and floc characteristics by electrocoagulation and chemical coagulation.

PubMed

Semerjian, Lucy; Damaj, Ahmad; Salam, Darine

2015-11-01

The current study aims at investigating the efficiency of electrocoagulation for the removal of humic acid from contaminated waters. In parallel, conventional chemical coagulation was conducted to asses humic acid removal patterns. The effect of varying contributing parameters (matrix pH, humic acid concentration, type of electrode (aluminum vs. iron), current density, solution conductivity, and distance between electrodes) was considered to optimize the electrocoagulation process for the best attainable humic acid removal efficiencies. Optimum removals were recorded at pH of 5.0-5.5, an electrical conductivity of 3000 μS/cm at 25 °C, and an electrode distance of 1 cm for both electrode types. With aluminum electrodes, a current density of 0.05 mA/cm2 outperformed 0.1 mA/cm2 yet not higher densities, whereas a current density of 0.8 mA/cm2 was needed for iron electrodes to exhibit comparable performance. With both electrode types, higher initial humic acid concentrations were removed at a slower rate but ultimately attained almost complete removals. On the other hand, the best humic acid removals (∼90%) by chemical coagulation were achieved at 4 mg/L for both coagulants. Also, higher removals were attained at elevated initial humic acid concentrations. Humic acid removals of 90% or higher at an initial HA concentration of 40 mg/L were exhibited, yet alum performed better at the highest experimented concentration. It was evident that iron flocs were larger, denser, and more geometrical in shape compared to aluminum flocs.

Evaluation Of Risk And Possible Mitigation Schemes For Previously Unidentified Hazards

NASA Technical Reports Server (NTRS)

Linzey, William; McCutchan, Micah; Traskos, Michael; Gilbrech, Richard; Cherney, Robert; Slenski, George; Thomas, Walter, III

2006-01-01

This report presents the results of arc track testing conducted to determine if such a transfer of power to un-energized wires is possible and/or likely during an arcing event, and to evaluate an array of protection schemes that may significantly reduce the possibility of such a transfer. The results of these experiments may be useful for determining the level of protection necessary to guard against spurious voltage and current being applied to safety critical circuits. It was not the purpose of these experiments to determine the probability of the initiation of an arc track event only if an initiation did occur could it cause the undesired event: an inadvertent thruster firing. The primary wire insulation used in the Orbiter is aromatic polyimide, or Kapton , a construction known to arc track under certain conditions [3]. Previous Boeing testing has shown that arc tracks can initiate in aromatic polyimide insulated 28 volts direct current (VDC) power circuits using more realistic techniques such as chafing with an aluminum blade (simulating the corner of an avionics box or lip of a wire tray), or vibration of an aluminum plate against a wire bundle [4]. Therefore, an arc initiation technique was chosen that provided a reliable and consistent technique of starting the arc and not a realistic simulation of a scenario on the vehicle. Once an arc is initiated, the current, power and propagation characteristics of the arc depend on the power source, wire gauge and insulation type, circuit protection and series resistance rather than type of initiation. The initiation method employed for these tests was applying an oil and graphite mixture to the ends of a powered twisted pair wire. The flight configuration of the heater circuits, the fuel/oxider (or ox) wire, and the RCS jet solenoid were modeled in the test configuration so that the behavior of these components during an arcing event could be studied. To determine if coil activation would occur with various protection wire schemes, 145 tests were conducted using various fuel/ox wire alternatives (shielded and unshielded) and/or different combinations of polytetrafuloroethylene (PTFE), Mystik tape and convoluted wraps to prevent unwanted coil activation. Test results were evaluated along with other pertinent data and information to develop a mitigation strategy for an inadvertent RCS firing. The SSP evaluated civilian aircraft wiring failures to search for aging trends in assessing the wire-short hazard. Appendix 2 applies Weibull statistical methods to the same data with a similar purpose.