Determination of Specific Heat Capacity on Composite Shape-Stabilized Phase Change Materials and Asphalt Mixtures by Heat Exchange System

PubMed Central

Ma, Biao; Zhou, Xue-yan; Liu, Jiang; You, Zhanping; Wei, Kun; Huang, Xiao-feng

2016-01-01

Previous research has shown that composite shape-stabilized phase change material (CPCM) has a remarkable capacity for thermal storage and stabilization, and it can be directly applied to highway construction without leakage. However, recent studies on temperature changing behaviors of CPCM and asphalt mixture cannot intuitively reflect the thermoregulation mechanism and efficiency of CPCM on asphalt mixture. The objective of this paper is to determine the specific heat capacity of CPCM and asphalt mixtures mixed with CPCM using the heat exchange system and the data acquisition system. Studies have shown that the temperature-rise curve of 5 °C CPCM has an obvious temperature plateau, while an asphalt mixture mixed with 5 °C CPCM does not; with increasing temperature, the specific heat capacities of both 5 °C CPCM and asphalt mixture first increase and then decrease, while the variation rate of 5 °C CPCM is larger than that of the asphalt mixture, and the maximum specific heat capacity of 5 °C CPCM appears around the initial phase change temperature. It is concluded that the temperature intervals of 5 °C CPCM are −18 °C–7 °C, 7 °C–25 °C and 25 °C–44 °C, respectively, and that of the asphalt mixture are −18 °C~10 °C, −10 °C~5 °C and 5 °C~28 °C. A low dosage of 5 °C CPCM has little influence on the specific heat capacity of asphalt mixture. Finally, the functions of specific heat capacities and temperature for CPCM and asphalt mixture mixed with CPCM were recommended by the sectional regression method. PMID:28773510

Determination of Specific Heat Capacity on Composite Shape-Stabilized Phase Change Materials and Asphalt Mixtures by Heat Exchange System.

PubMed

Ma, Biao; Zhou, Xue-Yan; Liu, Jiang; You, Zhanping; Wei, Kun; Huang, Xiao-Feng

2016-05-19

Previous research has shown that composite shape-stabilized phase change material (CPCM) has a remarkable capacity for thermal storage and stabilization, and it can be directly applied to highway construction without leakage. However, recent studies on temperature changing behaviors of CPCM and asphalt mixture cannot intuitively reflect the thermoregulation mechanism and efficiency of CPCM on asphalt mixture. The objective of this paper is to determine the specific heat capacity of CPCM and asphalt mixtures mixed with CPCM using the heat exchange system and the data acquisition system. Studies have shown that the temperature-rise curve of 5 °C CPCM has an obvious temperature plateau, while an asphalt mixture mixed with 5 °C CPCM does not; with increasing temperature, the specific heat capacities of both 5 °C CPCM and asphalt mixture first increase and then decrease, while the variation rate of 5 °C CPCM is larger than that of the asphalt mixture, and the maximum specific heat capacity of 5 °C CPCM appears around the initial phase change temperature. It is concluded that the temperature intervals of 5 °C CPCM are -18 °C-7 °C, 7 °C-25 °C and 25 °C-44 °C, respectively, and that of the asphalt mixture are -18 °C~10 °C, -10 °C~5 °C and 5 °C~28 °C. A low dosage of 5 °C CPCM has little influence on the specific heat capacity of asphalt mixture. Finally, the functions of specific heat capacities and temperature for CPCM and asphalt mixture mixed with CPCM were recommended by the sectional regression method.

Li-ion cells for terrestrial robots

NASA Technical Reports Server (NTRS)

Chin, Keith B.; Smart, M. C.; Narayanan, S. R.; Ratnakumar, B. V.; Whitcanack, L. D.; Davies, E. D.; Surampudi, S.; Raman, N. S.

2003-01-01

SAFT prismatic wound 5 Ahr MP series cells were evaluated for potential application in a lithium ion battery designed for Tactical Mobile Robots (TMR). In order to satisfy battery design requirements, a 10 Ahr battery containing two parallel 8-cell strings was proposed. The proposed battery has a weight and volume of approximately 3.2kg and 1.6 liters, respectively. Cell qualification procedures include initial characterization, followed by charge/discharge cycling at 100% DOD with intermittent EIS measurements at various state of charge. Certain cells were also subjected to extreme operational temperatures for worst-case analysis. Excellent specific energy (>130 Whr/kg) was obtained with initial characterization cycles. Even at abusive thermal conditions, the cell capacity fade was less than Ahr after 300 cycles. Rate characterization showed good cell discharge behavior with minimal decrease in capacity. At various state of charge, impedance measurements suggest that the cathode play a more significant role in capacity. At various state of charge impedance measurements suggest that the cathode play a more significant role in capacity fade than the anode.

Rapidly Synthesized, Few-Layered Pseudocapacitive SnS2 Anode for High-Power Sodium Ion Batteries.

PubMed

Thangavel, Ranjith; Samuthira Pandian, Amaresh; Ramasamy, Hari Vignesh; Lee, Yun-Sung

2017-11-22

The abundance of sodium resources has recently motivated the investigation of sodium ion batteries (SIBs) as an alternative to commercial lithium ion batteries. However, the low power and low capacity of conventional sodium anodes hinder their practical realization. Although most research has concentrated on the development of high-capacity sodium anodes, anodes with a combination of high power and high capacity have not been widely realized. Herein, we present a simple microwave irradiation technique for obtaining few-layered, ultrathin two-dimensional SnS 2 over graphene sheets in a few minutes. SnS 2 possesses a large number of active surface sites and exhibits high-capacity, rapid sodium ion storage kinetics induced by quick, nondestructive pseudocapacitance. Enhanced sodium ion storage at a high current density (12 A g -1 ), accompanied by high reversibility and high stability, was demonstrated. Additionally, a rationally designed sodium ion full cell coupled with SnS 2 //Na 3 V 2 (PO 4 ) 3 exhibited exceptional performance with high initial Coulombic efficiency (99%), high capacity, high stability, and a retention of ∼53% of the initial capacity even after the current density was increased by a factor of 140. In addition, a high specific energy of ∼140 Wh kg -1 and an ultrahigh specific power of ∼8.3 kW kg -1 (based on the mass of both the anode and cathode) were observed. Because of its outstanding performance and rapid synthesis, few-layered SnS 2 could be a promising candidate for practical realization of high-power SIBs.

Glucose-assisted synthesis of Na3V2(PO4)3/C composite as an electrode material for high-performance sodium-ion batteries

NASA Astrophysics Data System (ADS)

Li, Guangqiang; Jiang, Danlu; Wang, Hui; Lan, Xinzheng; Zhong, Honghai; Jiang, Yang

2014-11-01

A novel electrode material for sodium-ion batteries (NIBs), Na3V2(PO4)3 with a rhombohedral, Na+ superionic conductor (NASICON)-type structure, was synthesised via a solid-state carbon-thermal reduction reaction assisted by mechanochemical activation. Electron microscopy analysis showed that the synthesised Na3V2(PO4)3 particles had an average size of 300 nm, being coated with a uniform layer of carbon 3 nm in thickness. As a cathode material, Na3V2(PO4)3/C exhibited an initial specific discharge capacity of 98.17 mAh g-1 at 0.1C for potentials ranging from 2.5 to 3.8 V. This was owing to the V3+/V4+ redox couple, which corresponded to the two-phase transition between Na3V2(PO4)3 and NaV2(PO4)3. The cathode lost 4.92% of its discharge specific capacity after 50 cycles. As an anode material, Na3V2(PO4)3/C exhibited an initial specific discharge capacity of 63.2 mAh g-1 at 0.1C for potentials ranging from 1.0 to 2.5 V. This was owing to the V2+/V3+ redox couple, which corresponded to the two-phase transition between Na3V2(PO4)3 and Na4V2(PO4)3. The anode lost approximately 5.41% of its discharge specific capacity after 50 cycles. The three-dimensional channel structure of NaV2(PO4)3 and the changes induced in its lattice parameters during the charge/discharge processes were simulated on the basis of density functional theory.

Performance Characteristics of Lithium Ion Prototype Cells for 2003 Mars Sample Return Athena Rover

NASA Technical Reports Server (NTRS)

Ratnakumar, B. V.; Smart, M. C.; Ewell, R.; Surampudi, S.; Marsh, R. A.

2000-01-01

A viewgraph presentation outlines the mission objectives and power subsystem for the Mars Sample Return (MSR) Athena Rover. The NASA-DOD (depth of discharge) Interagency Li Ion program objectives are discussed. Evaluation tests performed at JPL are listed, and test results are shown for the Li-Ion cell initial capacity, charge/discharge capacity, voltage and ratio, specific energy, watt-hour efficiency, and cell voltage at various temperatures.

Evaluation of DELTA PREP: A Project Aimed at Integrating Primary Prevention of Intimate Partner Violence Within State Domestic Violence Coalitions

PubMed Central

Freire, Kimberley E.; Zakocs, Ronda; Le, Brenda; Hill, Jessica A.; Brown, Pamela; Wheaton, Jocelyn

2018-01-01

Background Intimate partner violence (IPV) has been recognized as a public health problem since the late 20th century. To spur IPV prevention efforts nationwide, the DELTA PREP Project selected 19 state domestic violence coalitions to build organizational prevention capacity and catalyze IPV primary prevention strategies within their states. Objective DELTA PREP’s summative evaluation addressed four major questions: (1) Did coalitions improve their prevention capacity during the project period? (2) Did coalitions serve as catalysts for prevention activities within their states during the project period? (3) Was initial prevention capacity associated with the number of prevention activity types initiated by coalitions by the end of the project? (4) Did coalitions sustain their prevention activities 6 months after the end of the project period? Results DELTA PREP achieved its capacity-building goal, with all 19 participant coalitions integrating prevention within their organizations and serving as catalysts for prevention activities in their states. At 6 months follow up, coalitions had sustained almost all prevention activities they initiated during the project. Baseline prevention capacity (Beginner vs. Intermediate) was not associated with the number of prevention activity types coalitions implemented by the end of the project. Conclusion Service and treatment organizations are increasingly asked to integrate a full spectrum of prevention strategies. Selecting organizations that have high levels of general capacity and readiness for an innovation like integrating a public health approach to IPV prevention will likely increase success in building an innovation-specific capacity, and in turn implementing an innovation. PMID:26245932

Evaluation of DELTA PREP: A Project Aimed at Integrating Primary Prevention of Intimate Partner Violence Within State Domestic Violence Coalitions.

PubMed

Freire, Kimberley E; Zakocs, Ronda; Le, Brenda; Hill, Jessica A; Brown, Pamela; Wheaton, Jocelyn

2015-08-01

Intimate partner violence (IPV) has been recognized as a public health problem since the late 20th century. To spur IPV prevention efforts nationwide, the DELTA PREP Project selected 19 state domestic violence coalitions to build organizational prevention capacity and catalyze IPV primary prevention strategies within their states. DELTA PREP's summative evaluation addressed four major questions: (1) Did coalitions improve their prevention capacity during the project period? (2) Did coalitions serve as catalysts for prevention activities within their states during the project period? (3) Was initial prevention capacity associated with the number of prevention activity types initiated by coalitions by the end of the project? (4) Did coalitions sustain their prevention activities 6 months after the end of the project period? DELTA PREP achieved its capacity-building goal, with all 19 participant coalitions integrating prevention within their organizations and serving as catalysts for prevention activities in their states. At 6 months follow up, coalitions had sustained almost all prevention activities they initiated during the project. Baseline prevention capacity (Beginner vs. Intermediate) was not associated with the number of prevention activity types coalitions implemented by the end of the project. Service and treatment organizations are increasingly asked to integrate a full spectrum of prevention strategies. Selecting organizations that have high levels of general capacity and readiness for an innovation like integrating a public health approach to IPV prevention will likely increase success in building an innovation-specific capacity, and in turn implementing an innovation. © 2015 Society for Public Health Education.

Tailoring Anisotropic Li-Ion Transport Tunnels on Orthogonally Arranged Li-Rich Layered Oxide Nanoplates Toward High-Performance Li-Ion Batteries.

PubMed

Xu, Ming; Fei, Linfeng; Zhang, Weibing; Li, Tao; Lu, Wei; Zhang, Nian; Lai, Yanqing; Zhang, Zhian; Fang, Jing; Zhang, Kai; Li, Jie; Huang, Haitao

2017-03-08

High-performance Li-rich layered oxide (LRLO) cathode material is appealing for next-generation Li-ion batteries owing to its high specific capacity (>300 mAh g -1 ). Despite intense studies in the past decade, the low initial Coulombic efficiency and unsatisfactory cycling stability of LRLO still remain as great challenges for its practical applications. Here, we report a rational design of the orthogonally arranged {010}-oriented LRLO nanoplates with built-in anisotropic Li + ion transport tunnels. Such a novel structure enables fast Li + ion intercalation and deintercalation kinetics and enhances structural stability of LRLO. Theoretical calculations and experimental characterizations demonstrate the successful synthesis of target cathode material that delivers an initial discharge capacity as high as 303 mAh g -1 with an initial Coulombic efficiency of 93%. After 200 cycles at 1.0 C rate, an excellent capacity retention of 92% can be attained. Our method reported here opens a door to the development of high-performance Ni-Co-Mn-based cathode materials for high-energy density Li-ion batteries.

Building capacity to develop an African teaching platform on health workforce development: a collaborative initiative of universities from four sub Saharan countries.

PubMed

Amde, Woldekidan Kifle; Sanders, David; Lehmann, Uta

2014-05-30

Health systems in many low-income countries remain fragile, and the record of human resource planning and management in Ministries of Health very uneven. Public health training institutions face the dual challenge of building human resources capacity in ministries and health services while alleviating and improving their own capacity constraints. This paper reports on an initiative aimed at addressing this dual challenge through the development and implementation of a joint Masters in Public Health (MPH) programme with a focus on health workforce development by four academic institutions from East and Southern Africa and the building of a joint teaching platform. Data were obtained through interviews and group discussions with stakeholders, direct and participant observations, and reviews of publications and project documents. Data were analysed using thematic analysis. The institutions developed and collaboratively implemented a 'Masters Degree programme with a focus on health workforce development'. It was geared towards strengthening the leadership capacity of Health ministries to develop expertise in health human resources (HRH) planning and management, and simultaneously build capacity of faculty in curriculum development and innovative educational practices to teach health workforce development. The initiative was configured to facilitate sharing of experience and resources. The implementation of this initiative has been complex, straddling multiple and changing contexts, actors and agendas. Some of these are common to postgraduate programmes with working learners, while others are unique to this particular partnership, such as weak institutional capacity to champion and embed new programmes and approaches to teaching. The partnership, despite significant inherent challenges, has potential for providing real opportunities for building the field and community of practice, and strengthening the staff and organizational capacity of participant institutions. Key learning points of the paper are:• the need for long-term strategies and engagement;• the need for more investment and attention to developing the capacity of academic institutions;• the need to invest specifically in educational/teaching expertise for innovative approaches to teaching and capacity development more broadly; and• the importance of increasing access and support for students who are working adults in public health institutions throughout Africa.

High-Temperature Electrochemical Performance of FeF3/C Nanocomposite as a Cathode Material for Lithium-Ion Batteries

NASA Astrophysics Data System (ADS)

Tang, Mengyun; Zhang, Zhengfu; Wang, Zi; Liu, Jingfeng; Yan, Hongge; Peng, Jinhui

2018-02-01

Iron trifluoride has been studied as a cathode material due to its cost-effectiveness, low toxicity, and high theoretical capacities of 712 mA h g-1. However, FeF3 has serious shortcomings of poor electronic conductivity and a slow diffusion rate of lithium ions, leading to a lower reversible specific capacity. In this work, FeF3/C nanocomposite has been synthesized successfully via a high-energy ball-milling method, and acetylene black is used as the conductive agent to improve the conductivity of FeF3. The FeF3/C nanocomposite shows a high initial discharge capacity of 346.25 and 161.58 mA h g-1 after 40th cycle at 50 mA g-1. It exhibits good cycle performance and rate performance. The high-temperature discharge capacities decreased with increase in the temperature. The initial high-temperature discharge capacities are found to be 254.17, 300.01, 281.25 and 125.16, and 216.875, 156, 141.67, 150, and 64.98 mA h g-1 at 20th cycles at the 40, 50, 60, and 70 °C, respectively.

Silicon hollow sphere anode with enhanced cycling stability by a template-free method

NASA Astrophysics Data System (ADS)

Chen, Song; Chen, Zhuo; Luo, Yunjun; Xia, Min; Cao, Chuanbao

2017-04-01

Silicon is a promising alternative anode material since it has a ten times higher theoretical specific capacity than that of a traditional graphite anode. However, the poor cycling stability due to the huge volume change of Si during charge/discharge processes has seriously hampered its widespread application. To address this challenge, we design a silicon hollow sphere nanostructure by selective etching and a subsequent magnesiothermic reduction. The Si hollow spheres exhibit enhanced electrochemical properties compared to the commercial Si nanoparticles. The initial discharge and charge capacities of the Si hollow sphere anode are 2215.8 mAh g-1 and 1615.1 mAh g-1 with a high initial coulombic efficiency (72%) at a current density of 200 mA g-1, respectively. In particular, the reversible capacity is 1534.5 mAh g-1 with a remarkable 88% capacity retention against the second cycle after 100 cycles, over four times the theoretical capacity of the traditional graphite electrode. Therefore, our work demonstrates the considerable potential of silicon structures for displacing commercial graphite, and might open up new opportunities to rationally design various nanostructured materials for lithium ion batteries.

3D Interconnected V6O13 Nanosheets Grown on Carbonized Textile via a Seed-Assisted Hydrothermal Process as High-Performance Flexible Cathodes for Lithium-Ion Batteries

NASA Astrophysics Data System (ADS)

Xu, Shixing; Cen, Dingcheng; Gao, Peibo; Tang, Huang; Bao, Zhihao

2018-03-01

Three-dimensional (3D) free-standing nanostructured materials have been proven to be one of the most promising electrodes for energy storage due to their enhanced electrochemical performance. And they are also widely studied for the wearable energy storage systems. In this work, interconnected V6O13 nanosheets were grown on the flexible carbonized textile (c-textile) via a seed-assisted hydrothermal method to form a 3D free-standing electrode for lithium-ion batteries (LIBs). The electrode exhibited a specific capacity of 170 mA h g-1 at a specific current of 300 mA g-1. With carbon nanotube (CNT) coating, its specific capacities further increased 12-40% at the various current rates. It could retain a reversible capacity of 130 mA h g-1, 74% of the initial capacity after 300 cycles at the specific current of 300 mA g-1. It outperformed most of the mixed-valence vanadium oxides. The improved electrochemical performance was ascribed to the synergistic effect of the 3D nanostructure of V6O13 for feasible Li+ diffusion and transport and highly conductive hierarchical conductive network formed by CNT and carbon fiber in c-textile.

In-situ synthesis of monodisperse micro-nanospherical LiFePO4/carbon cathode composites for lithium-ion batteries

NASA Astrophysics Data System (ADS)

Gong, Hao; Xue, Hairong; Wang, Tao; He, Jianping

2016-06-01

The LiFePO4 is recognized as the promising cathode material, due to its high specific capacity, excellent, structural stability and environmental benignity. However, it is blamed for the low tap density and poor rate performance when served as the cathode materials for a long time. Here, the microspheric LiFePO4/C composites are successfully synthesized through a one-step in-situ solvothermal method combined with carbothermic reduction. These LiFePO4/C microspheres are assembled by LiFePO4 nanoparticles (∼100 nm) and uniformly coated by the carbon, which show a narrow diameter distribution of 4 μm. As a cathode material for lithium ion batteries, the LiFePO4/C composites can deliver an initiate charge capacity of 155 mAh g-1 and retain 90% of initial capacity after 200 cycles at 0.1 C. When cycled at high current densities up to 20 C, it shows a discharge capacity of ∼60 mAh g-1, exhibiting superior rate performance. The significantly improved electrochemical performance of LiFePO4/C composites material can be attributed to its special micro-nano hierarchical structure. Microspheric LiFePO4/C composites exhibit a high tap density about 1.3 g cm-3. What's more, the well-coated carbon insures the high electrical conductivity and the nano-sized LiFePO4/C particles shorten lithium ion transport, thus exhibiting the high specific capacity, high cycling stability and good rate performance.

Interconnected silicon hollow nanospheres for lithium-ion battery anodes with long cycle life.

PubMed

Yao, Yan; McDowell, Matthew T; Ryu, Ill; Wu, Hui; Liu, Nian; Hu, Liangbing; Nix, William D; Cui, Yi

2011-07-13

Silicon is a promising candidate for the anode material in lithium-ion batteries due to its high theoretical specific capacity. However, volume changes during cycling cause pulverization and capacity fade, and improving cycle life is a major research challenge. Here, we report a novel interconnected Si hollow nanosphere electrode that is capable of accommodating large volume changes without pulverization during cycling. We achieved the high initial discharge capacity of 2725 mAh g(-1) with less than 8% capacity degradation every hundred cycles for 700 total cycles. Si hollow sphere electrodes also show a Coulombic efficiency of 99.5% in later cycles. Superior rate capability is demonstrated and attributed to fast lithium diffusion in the interconnected Si hollow structure.

Six ways not to improve patient flow: a qualitative study.

PubMed

Kreindler, Sara Adi

2017-05-01

Although well-established principles exist for improving the timeliness and efficiency of care, many organisations struggle to achieve more than small-scale, localised gains. Where care processes are complex and include segments under different groups' control, the elegant solutions promised by improvement methodologies remain elusive. This study sought to identify common design flaws that limit the impact of flow initiatives. This qualitative study was conducted within an explanatory case study of a Canadian regional health system in which multitudinous flow initiatives had yielded no overall improvement in system performance. Interviews with 62 senior, middle and departmental managers, supplemented by ∼700 documents on flow initiatives, were analysed using the constant comparative method. Findings suggested that smooth flow depends on linking a defined population to appropriate capacity by means of an efficient process ; flawed initiatives reflected failure to consider one or more of these essential elements. Many initiatives focused narrowly on process, failing to consider that the intended population was poorly defined or the needed capacity inaccessible; some introduced capacity for an intended population, but offered no process to link the two. Moreover, interveners were unable to respond effectively when a bottleneck moved to another part of the system. Errors of population, capacity and process, in different combinations, generated six 'formulae for failure'. Typically, flawed initiatives focused on too small a segment of the patient journey to properly address the impediments to flow. The proliferation of narrowly focused initiatives, in turn, reflected a decentralised system in which responsibility for flow improvement was fragmented. Thus, initiatives' specific design flaws may have their roots in a deeper problem: the lack of a coherent system-level strategy. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

National Airspace System : long-term capacity planning needed despite recent reduction in flight delays

DOT National Transportation Integrated Search

2001-12-01

The General Accounting Office (GAO) was asked to examine the aviation community's efforts to reduce flight delays. Specifically the GAO focused their work on the following questions: 1) What initiatives are planned or under way by the federal governm...

Calibration of region-specific gates pile driving formula for LRFD : final report 561.

DOT National Transportation Integrated Search

2016-05-01

This research project proposes new DOTD pile driving formulas for pile capacity verification using pile driving blow : counts obtained at either end-of-initial driving (EOID) or at the beginning-of-restrike (BOR). The pile driving : formulas were dev...

One-dimensional surface-imprinted polymeric nanotubes for specific biorecognition by initiated chemical vapor deposition (iCVD).

PubMed

Ince, Gozde Ozaydin; Armagan, Efe; Erdogan, Hakan; Buyukserin, Fatih; Uzun, Lokman; Demirel, Gokhan

2013-07-24

Molecular imprinting is a powerful, generic, and cost-effective technique; however, challenges still remain related to the fabrication and development of these systems involving nonhomogeneous binding sites, insufficient template removing, incompatibility with aqueous media, low rebinding capacity, and slow mass transfer. The vapor-phase deposition of polymers is a unique technique because of the conformal nature of coating and offers new possibilities in a number of applications including sensors, microfluidics, coating, and bioaffinity platforms. Herein, we demonstrated a simple but versatile concept to generate one-dimensional surface-imprinted polymeric nanotubes within anodic aluminum oxide (AAO) membranes based on initiated chemical vapor deposition (iCVD) technique for biorecognition of immunoglobulin G (IgG). It is reported that the fabricated surface-imprinted nanotubes showed high binding capacity and significant specific recognition ability toward target molecules compared with the nonimprinted forms. Given its simplicity and universality, the iCVD method can offer new possibilities in the field of molecular imprinting.

Ontogeny of intestinal safety factors: lactase capacities and lactose loads.

PubMed

O'Connor, T P; Diamond, J

1999-03-01

We measured intestinal safety factors (ratio of a physiological capacity to the load on it) for lactose digestion in developing rat pups. Specifically, we assessed the quantitative relationships between lactose load and the series capacities of lactase and the Na+-glucose cotransporter (SGLT-1). Both capacities increased significantly with age in suckling pups as a result of increasing intestinal mass and maintenance of mass-specific activities. The youngest pups examined (5 days) had surprisingly high safety factors of 8-13 for both lactase and SGLT-1, possibly because milk contains lactase substrates other than lactose; it also, however, suggests that their intestinal capacities were being prepared to meet future demands rather than just current ones. By day 10 (and also at day 15), increased lactose loads resulted in lower safety factors of 4-6, values more typical of adult intestines. The safety factor of SGLT-1 in day 30 (weanling) and day 100 (adult) rats was only approximately 1.0. This was initially unexpected, because most adult intestines maintain a modest reserve capacity beyond nutrient load values, but postweaning rats appear to use hindgut fermentation, assessed by gut morphology and hydrogen production assays, as a built-in reserve capacity. The series capacities of lactase and SGLT-1 varied in concert with each other over ontogeny and as lactose load was manipulated by experimental variation in litter size.

Developing nursing research in the United Arab Emirates: a narrative review.

PubMed

McCreaddie, M; Kuzemski, D; Griffiths, J; Sojka, E M; Fielding, M; Al Yateem, N; Williams, J J

2018-03-01

This article identified, critically analysed and synthesized the literature on international nursing and midwifery research capacity building and standards. The United Arab Emirates is heavily dependent up on expatriate nurses. Only 4% of nurses working within the country are Emirati. The nation is therefore committed to developing nurses and nursing as a profession. The United Arab Emirates' Nursing and Midwifery Council was formed in 2009 and initially focused on regulation, education and specialization. This review was undertaken to inform the work of the Council's newly established Scientific Research Sub-Committee. A rapid narrative review was conducted using the Cumulative Index of Nursing and Allied Health Literature database, key words, Boolean operators, parameters and a journal-specific search. An inclusion/exclusion criterion was identified. The search provided 332 articles with 45 included in the final review. The literature on nursing research 'standards' and 'capacity building' is diverse and inconsistent across continents and in approaches. Nursing research has evolved to varying degrees across the globe. Nevertheless, irrespective of the locale, there are similar problems encountered in growing research, for example nursing faculty shortage, lack of collaborative research, funding. There are also specific challenges in the Middle East and North Africa region. The review was constrained by time and access. There are specific challenges for the United Arab Emirates. However, the country is well placed to learn from the experiences of colleagues elsewhere. Time and commitment is required to build the solid foundations necessary to ensure robust, sustained growth. Identifying research capacity as both a process and outcome at the outset may also assist. Further, it may be prudent to consider initiating a Gulf Coast Countries' collaborative approach to building research capacity to harness scare resources and create a larger critical mass. © 2017 International Council of Nurses.

Surface modification of cathode material 0.5Li2MnO3·0.5LiMn1/3Ni1/3Co1/3O2 by alumina for lithium-ion batteries

NASA Astrophysics Data System (ADS)

Li, Yonghu; Chang, Xingping; Xu, Qunjie; Lai, Chunyan; Liu, Xinnuan; Yuan, Xiaolei; Liu, Haimei; Min, Yulin

2018-02-01

In an attempt to overcome the irreversible capacity loss occurred during the first cycle and stabilize the surface structure, an alumina coating layer has been triumphantly prepared on the surface of 0.5Li2MnO3·0.5LiMn1/3Ni1/3Co1/3O2 cathode material with different amounts (1, 2, and 3 wt%) through a simple hydrolysis reaction, followed by an annealing process. The results reveal that the coated materials have a higher crystallinity and the particles are evenly distributed. As a cathode material for lithium-ion batteries, the 2-wt% coated sample delivers initial discharge specific capacity of 211.7 mAh g-1 at a rate of 1 C between 2.0 and 4.8 V with an initial columbic efficiency of 73.2%. Meanwhile, it exhibits the highest discharge specific capacity of 206.2 mAh g-1 with 97.4% capacity retention after 100 cycles at and much elevated rate capability compared to uncoated material. The excellent cycling stability and more superior rate property can be ascribed to alumina coating layer, which has a surface stabilization effect on these cathode materials, lessening the dissolution of metal ions. The electrochemical impedance and cyclic voltammetry studies indicate that coated by alumina improved the kinetic performance for lithium-rich layered materials, showing a prospect for practical lithium battery application.

NASA's Indigenous Capacity Building Initiative: Balancing Traditional Knowledge and Existing Remote Sensing Training to Inform Management Decisions

NASA Astrophysics Data System (ADS)

McCullum, A. J. K.; Schmidt, C.; Palacios, S. L.; Ly, V.

2017-12-01

NASA's Indigenous Capacity Building Initiative is aimed to provide remote sensing training, mentoring, and research opportunities to the indigenous community. A key programmatic goal is the co-production of place-based trainings where participants have the opportunity to address specific natural resource research and management issues facing their tribal lands. Three primary strategies have been adopted to engage with our tribal partners, these include: (1) the use of existing tribal networks and conferences such as the National Tribal GIS Conference, (2) coordination with other federal agencies such as the Bureau of Indian Affairs (BIA) and tribal liaisons at regional Climate Science Centers, and (3) connecting with tribes directly. Regional partner visits with tribes, such as meetings with the Samish Indian Nation, are integral to cultivate trusting, collaborative, and sustained partnerships and an understanding of how Earth Observations can be applied to the unique set of challenges and goals each tribe faces. As the program continues to grow, we aim to increase our incorporation of Traditional Ecological Knowledge (TEK) into technical methods and to develop trainings tailored to thematic areas of interest to specific tribes. Engagement and feedback are encouraged to refine our approaches to increase capacity within the indigenous community to utilize NASA Earth Observations.

Goal-oriented networks and capacity building for natural hazards - examples in the Dresden region

NASA Astrophysics Data System (ADS)

Hutter, G.

2013-04-01

Networks and networking are important to build social capacities for natural hazards. However, up to now, it is an open question which types of networks contribute to capacity building under certain circumstances. The paper focuses on the type of a goal-oriented network. The distinction between goal orientation and goal directedness is used to show the following: goal directedness of networks to build capacities for natural hazards involves intensive and continuous processes of sensemaking (Weick, 1995) to specify the network goal. This process of specifying an initial goal statement is important in small and large networks. The governance form of a lead organization network facilitates goal specification. The paper illustrates these findings through evidence from two case studies conducted in the Dresden region in Germany.

Overview of space power electronic's technology under the CSTI High Capacity Power Program

NASA Technical Reports Server (NTRS)

Schwarze, Gene E.

1994-01-01

The Civilian Space Technology Initiative (CSTI) is a NASA Program targeted at the development of specific technologies in the areas of transportation, operations and science. Each of these three areas consists of major elements and one of the operation's elements is the High Capacity Power element. The goal of this element is to develop the technology base needed to meet the long duration, high capacity power requirements for future NASA initiatives. The High Capacity Power element is broken down into several subelements that includes energy conversion in the areas of the free piston Stirling power converter and thermoelectrics, thermal management, power management, system diagnostics, and environmental compatibility and system's lifetime. A recent overview of the CSTI High capacity Power element and a description of each of the program's subelements is given by Winter (1989). The goals of the Power Management subelement are twofold. The first is to develop, test, and demonstrate high temperature, radiation-resistant power and control components and circuits that will be needed in the Power Conditioning, Control and Transmission (PCCT) subsystem of a space nuclear power system. The results obtained under this goal will also be applicable to the instrumentation and control subsystem of a space nuclear reactor. These components and circuits must perform reliably for lifetimes of 7-10 years. The second goal is to develop analytical models for use in computer simulations of candidate PCCT subsystems. Circuits which will be required for a specific PCCT subsystem will be designed and built to demonstrate their performance and, also, to validate the analytical models and simulations. The tasks under the Power Management subelement will now be described in terms of objectives, approach and present status of work.

Building capacity to develop an African teaching platform on health workforce development: a collaborative initiative of universities from four sub Saharan countries

PubMed Central

2014-01-01

Introduction Health systems in many low-income countries remain fragile, and the record of human resource planning and management in Ministries of Health very uneven. Public health training institutions face the dual challenge of building human resources capacity in ministries and health services while alleviating and improving their own capacity constraints. This paper reports on an initiative aimed at addressing this dual challenge through the development and implementation of a joint Masters in Public Health (MPH) programme with a focus on health workforce development by four academic institutions from East and Southern Africa and the building of a joint teaching platform. Methods Data were obtained through interviews and group discussions with stakeholders, direct and participant observations, and reviews of publications and project documents. Data were analysed using thematic analysis. Case description The institutions developed and collaboratively implemented a ‘Masters Degree programme with a focus on health workforce development’. It was geared towards strengthening the leadership capacity of Health ministries to develop expertise in health human resources (HRH) planning and management, and simultaneously build capacity of faculty in curriculum development and innovative educational practices to teach health workforce development. The initiative was configured to facilitate sharing of experience and resources. Discussion The implementation of this initiative has been complex, straddling multiple and changing contexts, actors and agendas. Some of these are common to postgraduate programmes with working learners, while others are unique to this particular partnership, such as weak institutional capacity to champion and embed new programmes and approaches to teaching. Conclusions The partnership, despite significant inherent challenges, has potential for providing real opportunities for building the field and community of practice, and strengthening the staff and organizational capacity of participant institutions. Key learning points of the paper are: • the need for long-term strategies and engagement; • the need for more investment and attention to developing the capacity of academic institutions; • the need to invest specifically in educational/teaching expertise for innovative approaches to teaching and capacity development more broadly; and • the importance of increasing access and support for students who are working adults in public health institutions throughout Africa. PMID:24886267

Capacity Initiatives, Volume 2

DOT National Transportation Integrated Search

1992-07-01

This is the second in a series of pamphlets detailing capacity initiatives that : offer solutions for improving the Nation's aviation system capacity. Based on : the application and refinement of new systems and procedures, these initiatives : promis...

Doped Si nanoparticles with conformal carbon coating and cyclized-polyacrylonitrile network as high-capacity and high-rate lithium-ion battery anodes.

PubMed

Xie, Ming; Piper, Daniela Molina; Tian, Miao; Clancey, Joel; George, Steven M; Lee, Se-Hee; Zhou, Yun

2015-09-11

Doped Si nanoparticles (SiNPs) with conformal carbon coating and cyclized-polyacrylonitrile (PAN) network displayed capacities of 3500 and 3000 mAh g(-1) at C/20 and C/10, respectively. At 1 C, the electrode preserves a specific discharge capacity of ∼1500 mAh g(-1) for at least 60 cycles without decay. Al2O3 atomic layer deposition (ALD) helps improve the initial Coulombic efficiency (CE) to 85%. The dual coating of conformal carbon and cyclized-PAN help alleviate volume change and facilitate charge transfer. Ultra-thin Al2O3 ALD layers help form a stable solid electrolyte interphase interface.

An Initial Study of Airport Arrival Heinz Capacity Benefits Due to Improved Scheduling Accuracy

NASA Technical Reports Server (NTRS)

Meyn, Larry; Erzberger, Heinz

2005-01-01

The long-term growth rate in air-traffic demand leads to future air-traffic densities that are unmanageable by today's air-traffic control system. I n order to accommodate such growth, new technology and operational methods will be needed in the next generation air-traffic control system. One proposal for such a system is the Automated Airspace Concept (AAC). One of the precepts of AAC is to direct aircraft using trajectories that are sent via an air-ground data link. This greatly improves the accuracy in directing aircraft to specific waypoints at specific times. Studies of the Center-TRACON Automation System (CTAS) have shown that increased scheduling accuracy enables increased arrival capacity at CTAS equipped airports.

Facile synthesis of hierarchical CoMn2O4 microspheres with porous and micro-/nanostructural morphology as anode electrodes for lithium-ion batteries

NASA Astrophysics Data System (ADS)

Li, Yana; Hou, Xianhua; Li, Yajie; Ru, Qiang; Wang, Shaofeng; Hu, Shejun; Lam, Kwok-ho

2017-09-01

Hierarchical CoMn2O4 microspheres assembled by nanoparticles have been successfully synthesized by a facile hydrothermal method and a subsequent annealing treatment. XRD detection indicate the crystal structure. SEM and TEM results reveal the 3-dimensional porous and micro-/nanostructural microsphere assembled by nanoparticles with a size of 20-100 nm. The CoMn2O4 electrode show initial specific discharge capacity of approximately 1546 mAh/g at the current rates 100 mA/g with a coulombic efficiency of 66.7% and remarkable specific capacities (1029-485 mAh/g) at various current rates (100-2800 mA/g). [Figure not available: see fulltext.

The 4.5 inch diameter IPV Ni-H2 cell development program

NASA Technical Reports Server (NTRS)

Miller, L.

1986-01-01

Interest in larger capacity Ni-H2 battery cells for space applications has resulted in the initiation of a development/qualification/production program. Cell component design was completed and component hardware fabricated and/or delivered. Finished cell design projections demonstrate favorable specific energies in the range of 70 to 75 Whr/Kg (32 to 34 Whr/Lb) for capacities of 100 to 250 Ah. It is further planned during this effort to evaluate the advanced cell design technology which has evolved from the work conducted at the NASA/Lewis Research Center.

The 4.5 inch diameter IPV Ni-H2 cell development program

NASA Astrophysics Data System (ADS)

Miller, L.

1986-09-01

Interest in larger capacity Ni-H2 battery cells for space applications has resulted in the initiation of a development/qualification/production program. Cell component design was completed and component hardware fabricated and/or delivered. Finished cell design projections demonstrate favorable specific energies in the range of 70 to 75 Whr/Kg (32 to 34 Whr/Lb) for capacities of 100 to 250 Ah. It is further planned during this effort to evaluate the advanced cell design technology which has evolved from the work conducted at the NASA/Lewis Research Center.

Layered sulfur/PEDOT:PSS nano composite electrodes for lithium sulfur cell applications

NASA Astrophysics Data System (ADS)

Anilkumar, K. M.; Jinisha, B.; Manoj, M.; Pradeep, V. S.; Jayalekshmi, S.

2018-06-01

Lithium-Sulfur (Li-S) cells are emerging as the next generation energy storage devices owing to their impressive electrochemical properties with high theoretical specific capacity of 1675 mAh/g. Lack of electronic conductivity of sulfur, its volume expansion during high lithium intake and the shuttling effect due to the formation of soluble polysulfides are the main limitations, delaying the commercialization of this technology. To address these challenges, in the present work, the conducting polymer PEDOT:PSS is used as the covering matrix over the sulfur particles to improve their Li storage properties. The sulfur/PEDOT:PSS nanocomposite is synthesised using the hydrothermal process and its formation with the polymer coating over sulfur nanoparticles is established from the XRD, Raman spectroscopy, FE-SEM and TEM studies. The electrochemical studies show that the cells assembled using the sulfur/PEDOT:PSS nanocomposite as the cathode, with the components taken in the weight ratio of 9:1, offer a reversible capacity of 1191 mAh g-1 at 0.1C rate. These cells display stable electrochemical capacities over 200 cycles at gradually increasing current rates. The polymer layer facilitates electronic conduction and suppresses the polysulfide formation and the volume expansion of sulfur. A reversible capacity of 664 mAh g-1 is observed after 200 cycles at 1C rate with the capacity retention of 75 % of the initial stable capacity. The highlight of the present work is the possibility to achieve high discharge capacities at high C rates and the retention of a good percentage of the initial capacity over 200 cycles, for these Li-S cells.

Conformal Coating Strategy Comprising N-doped Carbon and Conventional Graphene for Achieving Ultrahigh Power and Cyclability of LiFePO4.

PubMed

Zhang, Kan; Lee, Jeong-Taik; Li, Ping; Kang, Byoungwoo; Kim, Jung Hyun; Yi, Gi-Ra; Park, Jong Hyeok

2015-10-14

Surface carbon coating to improve the inherent poor electrical conductivity of lithium iron phosphate (LiFePO4, LFP) has been considered as most efficient strategy. Here, we also report one of the conventional methods for LFP but exhibiting a specific capacity beyond the theoretical value, ultrahigh rate performance, and excellent long-term cyclability: the specific capacity is 171.9 mAh/g (70 μm-thick electrode with ∼10 mg/cm(2) loading mass) at 0.1 C (17 mA/g) and retains 143.7 mAh/g at 10 C (1.7 A/g) and 95.8% of initial capacity at 10 C after 1000 cycles. It was found that the interior conformal N-C coating enhances the intrinsic conductivity of LFP nanorods (LFP NR) and the exterior reduced graphene oxide coating acts as an electrically conducting secondary network to electrically connect the entire electrode. The great electron transport mutually promoted with shorten Li diffusion length on (010) facet exposed LFP NR represents the highest specific capacity value recorded to date at 10 C and ultralong-term cyclability. This conformal carbon coating approach can be a promising strategy for the commercialization of LFP cathode in lithium ion batteries.

MoS2 Nanosheets Vertically Grown on Carbonized Corn Stalks as Lithium-Ion Battery Anode.

PubMed

Ma, Luxiang; Zhao, Binglu; Wang, Xusheng; Yang, Junfeng; Zhang, Xinxiang; Zhou, Yuan; Chen, Jitao

2018-06-25

In this study, MoS 2 nanosheets are vertically grown on the inside and outside surfaces of the carbonized corn stalks (CCS) by a simple hydrothermal reaction. The vertically grown structure can not only improve the transmission rate of Li + and electrons but also avoid the agglomeration of the nanosheets. Meanwhile, a new approach of biomass source application is presented. We use CCS instead of graphite powders, which can not only avoid the exploitation of graphite resources, but also be used as a matrix for MoS 2 growth to prevent the electrode from being further decomposed during long cycles and at high current densities. Meanwhile, lithium-ion batteries show remarkable electrochemical performance. They demonstrate a high specific capacity of 1409.5 mA g -1 at 100 mA g -1 in the initial cycle. After 250 cycles, the discharge capacity is still as high as 1230.9 mAh g -1 . Even at 4000 mA g -1 , they show a high specific capacity of 777.7 mAh g -1 . Furthermore, the MoS 2 /CCS electrodes show long cycle life, and the specific capacity is still up to ∼500 mAh g -1 at 5000 mA g -1 after 1000 cycles.

Flexible Carbon Nanotube Modified Separator for High-Performance Lithium-Sulfur Batteries

PubMed Central

Liu, Bin; Wu, Xiaomeng; Wang, Shan; Tang, Zhen; Yang, Quanling; Hu, Guo-Hua; Xiong, Chuanxi

2017-01-01

Lithium-sulfur (Li-S) batteries have become promising candidates for electrical energy storage systems due to their high theoretical specific energy density, low cost and environmental friendliness. However, there are some technical obstacles of lithium-sulfur batteries to be addressed, such as the shuttle effect of polysulfides. Here, we introduced organically modified carbon nanotubes (CNTs) as a coating layer for the separator to optimize structure and enhance the performance of the Li-S battery. The results showed that the cell with a CNTs-coated separator exhibited an excellent cycling performance. Compared to the blank separator, the initial discharge capacity and the capacity after 100 cycles for the CNTs-coated separator was increased by 115% and 161%, respectively. Besides, according to the rate capability test cycling from 0.1C to 2C, the battery with a CNTs-coated separator still released a capacity amounting to 90.2% of the initial capacity, when the current density returned back to 0.1C. It is believed that the organically modified CNTs coating effectively suppresses the shuttle effect during the cycling. The employment of a CNTs-coated separator provides a promising approach for high-performance lithium-sulfur batteries. PMID:28933721

Silicon Framework Allotropes for Li-ion and Na-ion Batteries: New Insight for a Reversible Capacity.

NASA Astrophysics Data System (ADS)

Marzouk, Asma; Soto, Fernando; Burgos, Juan; Balbuena, Perla; El-Mellouhi, Fadwa

Silicon has the capacity to host a large amount of Li which makes it an attractive anode material despite suffering from swelling problem leading to irreversible capacity loss. The possibility of an easy extraction of Na atoms from Si24Na4 inspired us to adopt the Si24 as an anode material for Lithium-ion and sodium-ion Batteries. Using DFT, we evaluate the specific capacity and the intercalation potential of Si24 allotrope. Enhanced capacities are sought by designing a new silicon allotrope. We demonstrated that these Si24 allotropes show a negligible volume expansion and conserve their periodic structures after the maximum insertion/disinsertion of the ions which is crucial to prevent the capacity loss during cycling. DFT and ab-initio molecular dynamics (AIMD) studies give insights on the most probable surface adsorption and reaction sites, lithiation and sodiation, as well as initial stages of SEI formation and ionic diffusion. Qatar National Research Fund (QNRF) (NPRP 7-162-2-077).

29 CFR 1926.906 - Initiation of explosive charges-electric blasting.

Code of Federal Regulations, 2013 CFR

2013-07-01

...” position at all times, except when firing. It shall be so designed that the firing lines to the cap circuit... blasting machine shall not be in excess of its rated capacity. Furthermore, in primary blasting, a series..., shall use only blasting galvanometers or other instruments that are specifically designed for this...

29 CFR 1926.906 - Initiation of explosive charges-electric blasting.

Code of Federal Regulations, 2014 CFR

2014-07-01

...” position at all times, except when firing. It shall be so designed that the firing lines to the cap circuit... blasting machine shall not be in excess of its rated capacity. Furthermore, in primary blasting, a series..., shall use only blasting galvanometers or other instruments that are specifically designed for this...

29 CFR 1926.906 - Initiation of explosive charges-electric blasting.

Code of Federal Regulations, 2012 CFR

2012-07-01

...” position at all times, except when firing. It shall be so designed that the firing lines to the cap circuit... blasting machine shall not be in excess of its rated capacity. Furthermore, in primary blasting, a series..., shall use only blasting galvanometers or other instruments that are specifically designed for this...

29 CFR 1926.906 - Initiation of explosive charges-electric blasting.

Code of Federal Regulations, 2011 CFR

2011-07-01

...” position at all times, except when firing. It shall be so designed that the firing lines to the cap circuit... blasting machine shall not be in excess of its rated capacity. Furthermore, in primary blasting, a series..., shall use only blasting galvanometers or other instruments that are specifically designed for this...

Goal-oriented networks and capacity building for natural hazards - examples in the Dresden region

NASA Astrophysics Data System (ADS)

Hutter, G.

2014-01-01

Networks and networking are important for building social capacities for natural hazards. However, up to now, it has been an open question which types of networks contribute to capacity building under certain circumstances. The paper focuses on the type of a goal-oriented network. The distinction between goal orientation and goal directedness is used to show the following: goal directedness of networks to build capacities for natural hazards involves intensive and continuous processes of "sensemaking" (Weick, 1995) to specify the network goal. This process of specifying an initial goal statement is important in small and large networks at the regional level. The governance form of a lead organization network facilitates goal specification. The paper illustrates these findings through evidence from two case studies conducted in the Dresden region in Germany.

Optical Properties and Electrochemical Performance of LiFePO4 Thin Films Deposited on Transparent Current Collectors.

PubMed

Lee, HyunSeok; Yim, Haena; Kim, Kwang-Bum; Choi, Ji-Won

2015-11-01

LiFePO4 thin film cathodes are deposited on various transparent conducting oxide thin films on glass, which are used as cathode current collectors. The XRD patterns show that the thin films have the phase of LiFePO4 with an ordered olivine structure indexed to the orthorhombic Pmna space group. LiFePO4 thin film deposited on various TCO glass substrates exhibits transmittance of about 53%. The initial specific discharge capacities of LiFePO4 thin films are 25.0 μAh/cm2 x μm on FTO, 33.0 μAh/cm2 x μm on ITO, and 13.0 μAh/cm2 x μm on AZO coated glass substrates. Interestingly, the retention capacities of LiFePO4 thin films are 76.0% on FTO, 31.2% on ITO, and 37.7% on AZO coated glass substrates at 20th cycle. The initial specific discharge capacity of the LiFePO4/FTO electrode is slightly lower, but the discharge capacities of the LiFePO4/FTO electrode relatively decrease less than those of the others such as LiFePO4/ITO and LiFePO4/AZO with cycling. The results reported here provide the high transparency of LiFePO4 thin films cathode materials and the good candidate as FTO current collector of the LiFePO4 thin film cathode of transparent thin film rechargeable batteries due to its high transparency and cyclic retention.

Highly Cyclable Lithium-Sulfur Batteries with a Dual-Type Sulfur Cathode and a Lithiated Si/SiOx Nanosphere Anode.

PubMed

Lee, Sang-Kyu; Oh, Seung-Min; Park, Eunjun; Scrosati, Bruno; Hassoun, Jusef; Park, Min-Sik; Kim, Young-Jun; Kim, Hansu; Belharouak, Ilias; Sun, Yang-Kook

2015-05-13

Lithium-sulfur batteries could become an excellent alternative to replace the currently used lithium-ion batteries due to their higher energy density and lower production cost; however, commercialization of lithium-sulfur batteries has so far been limited due to the cyclability problems associated with both the sulfur cathode and the lithium-metal anode. Herein, we demonstrate a highly reliable lithium-sulfur battery showing cycle performance comparable to that of lithium-ion batteries; our design uses a highly reversible dual-type sulfur cathode (solid sulfur electrode and polysulfide catholyte) and a lithiated Si/SiOx nanosphere anode. Our lithium-sulfur cell shows superior battery performance in terms of high specific capacity, excellent charge-discharge efficiency, and remarkable cycle life, delivering a specific capacity of ∼750 mAh g(-1) over 500 cycles (85% of the initial capacity). These promising behaviors may arise from a synergistic effect of the enhanced electrochemical performance of the newly designed anode and the optimized layout of the cathode.

Study on novel functional materials carboxymethyl cellulose lithium (CMC-Li) improve high-performance lithium-ion battery.

PubMed

Qiu, Lei; Shao, Ziqiang; Xiang, Pan; Wang, Daxiong; Zhou, Zhenwen; Wang, Feijun; Wang, Wenjun; Wang, Jianquan

2014-09-22

Novel cellulose derivative CMC-Li was synthesized by cotton as raw material. The mechanism of the CMC-Li modified electrode materials by electrospinning was reported. CMC-Li/lithium iron phosphate (LiFePO4, LFP) composite fiber coated with LFP and CMC-Li nanofibers was successfully obtained by electrospinning. Then, CMC-Li/LFP nano-composite fiber was carbonized under nitrogen at a high temperature formed CNF/LFP/Li (CLL) composite nanofibers as cathode material. It can increase the contents of Li+, and improving the diffusion efficiency and specific capacity. The battery with CLL as cathode material retained close to 100% of initial reversible capacity after 200 cycles at 168 mAh g(-1), which was nearly the theoretical specific capacity of LFP. The cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), X-ray diffraction (XRD) and scanning electron microscope (SEM) were characterizing material performance. The batteries have good electrochemical property, outstanding pollution-free, excellent stability. Copyright © 2014 Elsevier Ltd. All rights reserved.

Designing Place-Based Interventions for Sustainability and Replicability: The Case of GO! Austin/VAMOS! Austin

PubMed Central

Hussaini, Aliya; Pulido, Carmen Llanes; Basu, Semonti; Ranjit, Nalini

2018-01-01

Place-based health efforts account for the role of the community environment in shaping decisions and circumstances that affect population well-being. Such efforts, rooted as they are in the theory that health is socially determined, mobilize resources for health promotion that are not typically used, and offer a more informed and robust way of promoting health outcomes within a community. Common criticisms of place-based work include the difficulty of replication, since engagement is so specific to a place, and limited sustainability of the work, in the absence of continued institutional structures, both within the community and supporting structures outside the community, to keep these initiatives resilient. This paper describes a place-based initiative, GO! Austin/VAMOS! Austin (GAVA), which was designed to harness the strengths of place-based work—namely, its specificity to place and community. From the start, the project was designed to balance this specificity with a focus on developing and utilizing a standardized set of evidence-informed implementation and evaluation approaches and tools that were flexible enough to be modified for specific settings. This was accompanied by an emphasis on leadership and capacity building within resident leaders, which provided for informed intervention and demand building capacity, but also for longevity as partners, philanthropic, and otherwise, moved in and out of the work. PMID:29623272

Designing Place-Based Interventions for Sustainability and Replicability: The Case of GO! Austin/VAMOS! Austin.

PubMed

Hussaini, Aliya; Pulido, Carmen Llanes; Basu, Semonti; Ranjit, Nalini

2018-01-01

Place-based health efforts account for the role of the community environment in shaping decisions and circumstances that affect population well-being. Such efforts, rooted as they are in the theory that health is socially determined, mobilize resources for health promotion that are not typically used, and offer a more informed and robust way of promoting health outcomes within a community. Common criticisms of place-based work include the difficulty of replication , since engagement is so specific to a place, and limited sustainability of the work, in the absence of continued institutional structures, both within the community and supporting structures outside the community, to keep these initiatives resilient. This paper describes a place-based initiative, GO! Austin/VAMOS! Austin (GAVA), which was designed to harness the strengths of place-based work-namely, its specificity to place and community. From the start, the project was designed to balance this specificity with a focus on developing and utilizing a standardized set of evidence-informed implementation and evaluation approaches and tools that were flexible enough to be modified for specific settings. This was accompanied by an emphasis on leadership and capacity building within resident leaders, which provided for informed intervention and demand building capacity, but also for longevity as partners, philanthropic, and otherwise, moved in and out of the work.

Self-Supported CoP Nanorod Arrays Grafted on Stainless Steel as an Advanced Integrated Anode for Stable and Long-Life Lithium-Ion Batteries.

PubMed

Xu, Xijun; Liu, Jun; Hu, Renzong; Liu, Jiangwen; Ouyang, Liuzhang; Zhu, Min

2017-04-19

To alleviate the capacity degradation of anode materials for Li-ion batteries, caused by serious volume expansion and particle aggregation, intensive attention has been devoted to the rational design and fabrication of novel anode architectures. Herein, self-supported CoP nanorod arrays have been facilely synthesized using hydrothemally deposited Co(CO 3 ) 0.5 (OH)⋅0.11 H 2 O nanorod arrays as the precursor, through a gas-phase phosphidation method. As the anode for Li-ion batteries, such 3D interconnected CoP nanorod arrays show an initial discharge capacity of 1067 mAh g -1 and a high reversible charge capacity of 737 mAh g -1 at 0.4 Ag -1 . After 400 cycles, their specific capacity can reach 510 mAh g -1 ; even after 900 cycles, they can still deliver a specific capacity of 390 mAh g -1 . CoP//LiCoO 2 full-cells also exhibit a high reversible capacity of 400 mAh g -1 after 50 cycles. These unique 3D interconnected CoP nanorod arrays also show ultrastable cycling performance over 500 cycles when used as the anode in a Na-ion battery. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

O3-type Na(Mn₀.₂₅Fe₀.₂₅Co₀.₂₅Ni₀.₂₅)O₂: a quaternary layered cathode compound for rechargeable Na ion batteries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Xi; Zhou, Yong-Ning; Wu, Di

2014-12-01

We report a new layered Na(Mn₀.₂₅Fe₀.₂₅Co₀.₂₅Ni₀.₂₅)O₂ compound with O3 oxygen stacking. It delivers 180 mAh/g initial discharge capacity and 578 Wh/kg specific energy density with good cycling capability at high cutoff voltage. In situ X-ray diffraction (XRD) shows a reversible structure evolution of O3-P3-O3'-O3'' upon Na de-intercalation. The excellent capacity and cycling performance at high cutoff voltage make it an important model system for studying the general issue of capacity fading in layered Na cathode compounds.

Fabrication and Performance of High Energy Li-Ion Battery Based on the Spherical Li[Li(0.2)Ni(0.16)Co(0.1)Mn(0.54)]O2 Cathode and Si Anode.

PubMed

Ye, Jing; Li, Yi-xuan; Zhang, Li; Zhang, Xue-ping; Han, Min; He, Ping; Zhou, Hao-shen

2016-01-13

The cathode materials of Li-ion batteries for electric vehicles require not only a large gravimetric capacity but also a high volumetric capacity. A new Li-rich layered oxide cathode with superior capacity, Li[Li0.20Ni0.16Co0.10Mn0.54]O2 (denoted as LNCM), is synthesized from precursor, a coprecipitated spherical metal hydroxide. The preparation technology of precursor such as stirring speed, concentration of metal solution, and reaction time are regulated elaborately. The final product LNCM shows a well-ordered, hexagonal-layer structure, as confirmed by Rietveld refinement of X-ray diffraction pattern. The particle size of the final product has an average diameter of about 10 μm, and the corresponding tap density is about 2.25 g cm(-3). Electrochemical measurements indicate that as-prepared LNCM has great initial columbic efficiency, reversible capacity, and cycling stability, with specific discharge capacities of 278 and 201 mAh g(-1) at 0.03 and 0.5 C rates, respectively. Cycling at 0.1 C, LNCM delivers a discharge capacity of 226 mAh g(-1) with 95% retention capacity after 50 cycles. Si/LNCM cell is fabricated using Si submicroparticle as anode against LNCM. The cell can exhibit a specific energy of 590 Wh kg(-1) based on the total weight of cathode and anode materials.

Advances and hope for perinatal HIV remission and cure in children and adolescents.

PubMed

Rainwater-Lovett, Kaitlin; Uprety, Priyanka; Persaud, Deborah

2016-02-01

The known timing of HIV infection in perinatal transmission, combined with the capacity for early antiretroviral therapy (ART) initiation and immune reconstitution, can provide unique insights into HIV persistence. The scientific basis for a pediatric-specific research agenda aimed at HIV remission and cure is discussed. Accumulating evidence supports a favorable biomarker profile for immunotherapeutic interventions in early treated, perinatally infected individuals. HIV DNA concentrations in infected cells of early treated infants decrease over the first few years of life and, after more than 10 years of ART, the overwhelming majority of noninduced proviral genomes are replication-deficient. With early ART initiation, approximately half of perinatally infected individuals become seronegative. Studies of untreated infants and vaccine trials indicate that infected infants can generate HIV-specific humoral responses. Taken together, this evidence suggests that early treatment results in low levels of replication-competent provirus, an absence of HIV-specific immunity, and the capacity to generate immune responses to potential immunotherapeutic interventions. Perinatally HIV-infected individuals require lifelong ART because of the prompt establishment of viral latency in long-lived resting memory CD4 T cells that rekindle viremia upon treatment cessation. However, intense research efforts are ongoing to perturb HIV latency toward reservoir clearance for virologic remission and cure in which perinatally infected individuals can discontinue ART.

Conformal spinel/layered heterostructures of Co3O4 shells grown on single-crystal Li-rich nanoplates for high-performance lithium-ion batteries

NASA Astrophysics Data System (ADS)

Xin, Yue; Lan, Xiwei; Chang, Peng; Huang, Yaqun; Wang, Libin; Hu, Xianluo

2018-07-01

Lithium-rich layered materials have received much attention because of their high specific capacity and high energy density. Unfortunately, they suffer from irreversible capacity loss, low initial Coulombic efficiency and poor cyclability. Here we report a facile co-precipitation method to synthesize uniform single-crystal Li-rich Li[Li0.2Mn0.54Ni0.13Co0.13]O2 nanoplates without using any template. Subsequently, a Co3O4 shell is in situ grown on the Li-rich nanoplates through a hydrothermal method, leading to spinel/layered heterostructures. The electrode made of conformal heterostructured Li-rich/Co3O4 nanoplates delivers a high discharge capacity of 296 mA h g-1 at 0.1 C with an initial Coulombic efficiency of 84%. The capacity retention reaches 83.2% with a discharge capacity of 223 mA h g-1 after 160 cycles at 0.2 C during the potential window ranging from 2.0 to 4.8 V. The enhanced electrochemical performance of the resulting Li-rich/Co3O4 nanoplates benefits from the unique conformal heterostructure as well as the electrochemically active LixCoOy generated between the reaction of Co3O4 shells and the extracted Li2O during charging/discharging processes.

Tuning the developing brain to social signals of emotions

PubMed Central

Leppänen, Jukka M.; Nelson, Charles A.

2010-01-01

PREFACE Humans in diverse cultures develop a similar capacity to recognize the emotional signals of different facial expressions. This capacity is mediated by a brain network that involves emotion-related brain circuits and higher-level visual representation areas. Recent studies suggest that the key components of this network begin to emerge early in life. The studies also suggest that initial biases in emotion-related brain circuits and the early coupling of these circuits and cortical perceptual areas provides a foundation for a rapid acquisition of representations of those facial features that denote specific emotions. PMID:19050711

Teaching Public Health Networks in England: an innovative approach to building public health capacity and capability.

PubMed

Orme, J; Pilkington, P; Gray, S; Rao, M

2009-12-01

This paper examines the development and achievements of the Teaching Public Health Networks (TPHNs) in England; an initiative that aimed to catalyse collaborative working between the public health workforce and further and higher education, to enhance public health knowledge in the wider workforce with a view to enhancing capacity to tackle inequalities and meeting public health targets. This paper highlights activities under three outcomes: mobilizing resources, people, money and materials; building capacity through training and infrastructure development; and raising public and political awareness. The TPHN approach is shown to have led to innovative developments in public health education and training, including engagement with professionals that have not previously had exposure to public health. This paper aims to disseminate the learning from this complex public health initiative, now in its third year of development, and to share examples of good practice. It is hoped that other countries can use the TPHN approach as a model to address the various common and country-specific challenges in public health workforce development.

Proposal for a United Nations Basic Space Technology Initiative

NASA Astrophysics Data System (ADS)

Balogh, Werner

Putting space technology and its applications to work for sustainable economic and social development is the primary objective of the United Nations Programme on Space Applications, launched in 1971. A specific goal for achieving this objective is to establish a sustainable national space capacity. The traditional line of thinking has supported a logical progression from building capacity in basic space science, to using space applications and finally - possibly - to establishing indigenous space technology capabilities. The experience in some countries suggests that such a strict line of progression does not necessarily hold true and that priority given to the establishment of early indigenous space technology capabilities may contribute to promoting the operational use of space applications in support of sustainable economic and social development. Based on these findings and on the experiences with the United Nations Basic Space Science Initiative (UNBSSI) as well as on a series of United Nations/International Academy of Astronautics Workshops on Small Satellites in the Service of Developing Countries, the United Nations Office for Outer Space Affairs (UNOOSA) is considering the launch of a dedicated United Nations Basic Space Technology Initiative (UNBSTI). The initiative would aim to contribute to capacity building in basic space technology and could include, among other relevant fields, activities related to the space and ground segments of small satellites and their applications. It would also provide an international framework for enhancing cooperation between all interested actors, facilitate the exchange of information on best practices, and contribute to standardization efforts. It is expected that these activities would advance the operational use of space technology and its applications in an increasing number of space-using countries and emerging space nations. The paper reports on these initial considerations and on the potential value-adding role the United Nations could play with such an initiative.

How Online Schools Serve and Fail to Serve At-Risk Students

ERIC Educational Resources Information Center

Figueiredo-Brown, Regina

2013-01-01

Purpose: Online schools were initially designed to provide access to diverse courses to advanced and homeschooled students, however, many online schools now market their programs specifically to students whose needs place them at-risk in traditional schools. The capacity of technology to address any of the needs of under-served students is largely…

Hydrothermal synthesis and potential applicability of rhombohedral siderite as a high-capacity anode material for lithium ion batteries

NASA Astrophysics Data System (ADS)

Zhao, Shiqiang; Yu, Yue; Wei, Shanshan; Wang, Yuxi; Zhao, Chenhao; Liu, Rui; Shen, Qiang

2014-05-01

Natural siderite is a valuable iron mineral composed of ferrous carbonate (FeCO3), which is commonly found in hydrothermal veins and contains no sulfur or phosphorus. In this paper, micro-sized FeCO3 crystallites are synthesized via a facile hydrothermal route, and almost all of them possess a rhombohedral shape similar to that of natural products. When applied as an anode material for lithium ion batteries, the synthetic siderite can deliver an initial specific discharge capacity of ∼1587 mAh g-1 with a coulombic efficiency of 68% at 200 mA g-1, remaining a reversible value of 1018 mAh g-1 over 120 cycles. Even at a high current density of 1000 mA g-1, after 120 cycles the residual specific capacity (812 mAh g-1) is still higher than the theoretical capacity of FeCO3 (463 mAh g-1). Moreover, a novel reversible conversion mechanism accounts for the excellent electrochemical performances of rhombohedral FeCO3 to a great extent, implying the potential applicability of synthetic siderite as lithium ion battery anodes.

The Bremerton enrollment capacity model: an enrollment capacity model supporting the military health system optimization plan.

PubMed

Helmers, S

2001-12-01

The Department of Defense has launched several initiatives to improve efficiency and quality of care in the military health system. The goal of empaneling 1,300 to 1,500 patients per primary care manager did not correlate well with Naval Hospital Bremerton's experience and did not accurately account for military-specific requirements. The Bremerton Model Task Force was chartered to assess current business practices, identify areas for improvement, and develop a capacity model reflecting military readiness and residency training requirements. Methods included a 12-month review of patient visits and staff surveys of how providers spent their day, with time-and-motion analysis to verify assumptions. Our capacity results (average, 791 enrollees per primary care manager) demonstrated that objective measures at the local level do not support enrollment to Department of Defense-specified levels. Significant changes in "corporate culture" are necessary to accomplish the military health system goals.

Country ownership and capacity building: the next buzzwords in health systems strengthening or a truly new approach to development?

PubMed Central

2012-01-01

Background During the last decade, donor governments and international agencies have increasingly emphasized the importance of building the capacity of indigenous health care organizations as part of strengthening health systems and ensuring sustainability. In 2009, the U.S. Global Health Initiative made country ownership and capacity building keystones of U.S. health development assistance, and yet there is still a lack of consensus on how to define either of these terms, or how to implement “country owned capacity building”. Discussion Concepts around capacity building have been well developed in the for-profit business sector, but remain less well defined in the non-profit and social sectors in low and middle-income countries. Historically, capacity building in developing countries has been externally driven, related to project implementation, and often resulted in disempowerment of local organizations rather than local ownership. Despite the expenditure of millions of dollars, there is no consensus on how to conduct capacity building, nor have there been rigorous evaluations of capacity building efforts. To shift to a new paradigm of country owned capacity building, donor assistance needs to be inclusive in the planning process and create true partnerships to conduct organizational assessments, analyze challenges to organizational success, prioritize addressing challenges, and implement appropriate activities to build new capacity in overcoming challenges. Before further investments are made, a solid evidence base should be established concerning what works and what doesn’t work to build capacity. Summary Country-owned capacity building is a relatively new concept that requires further theoretical exploration. Documents such as The Paris Declaration on Aid Effectiveness detail the principles of country ownership to which partner and donor countries should commit, but do not identify the specific mechanisms to carry out these principles. More evidence as to how country-owned capacity building plays out in practice is needed to guide future interventions. The Global Health Initiative funding that is currently underway is an opportunity to collect evaluative data and establish a centralized and comprehensive evidence base that could be made available to guide future country-owned capacity building efforts. PMID:22818046

Country ownership and capacity building: the next buzzwords in health systems strengthening or a truly new approach to development?

PubMed

Goldberg, Jessica; Bryant, Malcolm

2012-07-20

During the last decade, donor governments and international agencies have increasingly emphasized the importance of building the capacity of indigenous health care organizations as part of strengthening health systems and ensuring sustainability. In 2009, the U.S. Global Health Initiative made country ownership and capacity building keystones of U.S. health development assistance, and yet there is still a lack of consensus on how to define either of these terms, or how to implement "country owned capacity building". Concepts around capacity building have been well developed in the for-profit business sector, but remain less well defined in the non-profit and social sectors in low and middle-income countries. Historically, capacity building in developing countries has been externally driven, related to project implementation, and often resulted in disempowerment of local organizations rather than local ownership. Despite the expenditure of millions of dollars, there is no consensus on how to conduct capacity building, nor have there been rigorous evaluations of capacity building efforts. To shift to a new paradigm of country owned capacity building, donor assistance needs to be inclusive in the planning process and create true partnerships to conduct organizational assessments, analyze challenges to organizational success, prioritize addressing challenges, and implement appropriate activities to build new capacity in overcoming challenges. Before further investments are made, a solid evidence base should be established concerning what works and what doesn't work to build capacity. Country-owned capacity building is a relatively new concept that requires further theoretical exploration. Documents such as The Paris Declaration on Aid Effectiveness detail the principles of country ownership to which partner and donor countries should commit, but do not identify the specific mechanisms to carry out these principles. More evidence as to how country-owned capacity building plays out in practice is needed to guide future interventions. The Global Health Initiative funding that is currently underway is an opportunity to collect evaluative data and establish a centralized and comprehensive evidence base that could be made available to guide future country-owned capacity building efforts.

An initial-abstraction, constant-loss model for unit hydrograph modeling for applicable watersheds in Texas

USGS Publications Warehouse

Asquith, William H.; Roussel, Meghan C.

2007-01-01

Estimation of representative hydrographs from design storms, which are known as design hydrographs, provides for cost-effective, riskmitigated design of drainage structures such as bridges, culverts, roadways, and other infrastructure. During 2001?07, the U.S. Geological Survey (USGS), in cooperation with the Texas Department of Transportation, investigated runoff hydrographs, design storms, unit hydrographs,and watershed-loss models to enhance design hydrograph estimation in Texas. Design hydrographs ideally should mimic the general volume, peak, and shape of observed runoff hydrographs. Design hydrographs commonly are estimated in part by unit hydrographs. A unit hydrograph is defined as the runoff hydrograph that results from a unit pulse of excess rainfall uniformly distributed over the watershed at a constant rate for a specific duration. A time-distributed, watershed-loss model is required for modeling by unit hydrographs. This report develops a specific time-distributed, watershed-loss model known as an initial-abstraction, constant-loss model. For this watershed-loss model, a watershed is conceptualized to have the capacity to store or abstract an absolute depth of rainfall at and near the beginning of a storm. Depths of total rainfall less than this initial abstraction do not produce runoff. The watershed also is conceptualized to have the capacity to remove rainfall at a constant rate (loss) after the initial abstraction is satisfied. Additional rainfall inputs after the initial abstraction is satisfied contribute to runoff if the rainfall rate (intensity) is larger than the constant loss. The initial abstraction, constant-loss model thus is a two-parameter model. The initial-abstraction, constant-loss model is investigated through detailed computational and statistical analysis of observed rainfall and runoff data for 92 USGS streamflow-gaging stations (watersheds) in Texas with contributing drainage areas from 0.26 to 166 square miles. The analysis is limited to a previously described, watershed-specific, gamma distribution model of the unit hydrograph. In particular, the initial-abstraction, constant-loss model is tuned to the gamma distribution model of the unit hydrograph. A complex computational analysis of observed rainfall and runoff for the 92 watersheds was done to determine, by storm, optimal values of initial abstraction and constant loss. Optimal parameter values for a given storm were defined as those values that produced a modeled runoff hydrograph with volume equal to the observed runoff hydrograph and also minimized the residual sum of squares of the two hydrographs. Subsequently, the means of the optimal parameters were computed on a watershed-specific basis. These means for each watershed are considered the most representative, are tabulated, and are used in further statistical analyses. Statistical analyses of watershed-specific, initial abstraction and constant loss include documentation of the distribution of each parameter using the generalized lambda distribution. The analyses show that watershed development has substantial influence on initial abstraction and limited influence on constant loss. The means and medians of the 92 watershed-specific parameters are tabulated with respect to watershed development; although they have considerable uncertainty, these parameters can be used for parameter prediction for ungaged watersheds. The statistical analyses of watershed-specific, initial abstraction and constant loss also include development of predictive procedures for estimation of each parameter for ungaged watersheds. Both regression equations and regression trees for estimation of initial abstraction and constant loss are provided. The watershed characteristics included in the regression analyses are (1) main-channel length, (2) a binary factor representing watershed development, (3) a binary factor representing watersheds with an abundance of rocky and thin-soiled terrain, and (4) curve numb

Effect of protein on biohydrogen production from starch of food waste.

PubMed

Ding, H B; Liu, X Y; Stabnikova, O; Wang, J-Y

2008-01-01

This study demonstrated the influence of protein on biohydrogen production from carbohydrates, especially starch, by using different combinations of two model food wastes, rice as starch-rich and soybean residue as protein-rich food waste. It was found the maximum specific hydrogen production potential, 0.99 mol H2/mol initial starch as glucose, and the maximum specific hydrogen production rate, 530 ml H2/h g-VS, occurred at a starch/protein ratio of 1.7. The protein content in the initial food waste not only provided buffering capacity to neutralize the volatile fatty acids as concurrent products but also enhanced the hydrogen production by providing readily available organic nitrogen such as soluble proteins and amino acids to microorganisms. Copyright IWA Publishing 2008.

Prebiological evolution and the metabolic origins of life.

PubMed

Pratt, Andrew J

2011-01-01

The chemoton model of cells posits three subsystems: metabolism, compartmentalization, and information. A specific model for the prebiological evolution of a reproducing system with rudimentary versions of these three interdependent subsystems is presented. This is based on the initial emergence and reproduction of autocatalytic networks in hydrothermal microcompartments containing iron sulfide. The driving force for life was catalysis of the dissipation of the intrinsic redox gradient of the planet. The codependence of life on iron and phosphate provides chemical constraints on the ordering of prebiological evolution. The initial protometabolism was based on positive feedback loops associated with in situ carbon fixation in which the initial protometabolites modified the catalytic capacity and mobility of metal-based catalysts, especially iron-sulfur centers. A number of selection mechanisms, including catalytic efficiency and specificity, hydrolytic stability, and selective solubilization, are proposed as key determinants for autocatalytic reproduction exploited in protometabolic evolution. This evolutionary process led from autocatalytic networks within preexisting compartments to discrete, reproducing, mobile vesicular protocells with the capacity to use soluble sugar phosphates and hence the opportunity to develop nucleic acids. Fidelity of information transfer in the reproduction of these increasingly complex autocatalytic networks is a key selection pressure in prebiological evolution that eventually leads to the selection of nucleic acids as a digital information subsystem and hence the emergence of fully functional chemotons capable of Darwinian evolution.

Electrodeposited three-dimensional Ni-Si nanocable arrays as high performance anodes for lithium ion batteries.

PubMed

Liu, Hao; Hu, Liangbin; Meng, Ying Shirley; Li, Quan

2013-11-07

A configuration of three-dimensional Ni-Si nanocable array anodes is proposed to overcome the severe volume change problem of Si during the charging-discharging process. In the fabrication process, a simple and low cost electrodeposition is employed to deposit Si instead of the common expansive vapor phase deposition methods. The optimum composite nanocable array electrode achieves a high specific capacity ~1900 mA h g(-1) at 0.05 C. After 100 cycles at 0.5 C, 88% of the initial capacity (~1300 mA h g(-1)) remains, suggesting its good capacity retention ability. The high performance of the composite nanocable electrode is attributed to its excellent adhesion of the active material on the three-dimensional current collector and short ionic/electronic transport pathways during cycling.

Lessons learned about collaborative evaluation using the Capacity for Applying Project Evaluation (CAPE) framework with school and district leaders.

PubMed

Corn, Jenifer O; Byrom, Elizabeth; Knestis, Kirk; Matzen, Nita; Thrift, Beth

2012-11-01

Schools, districts, and state-level educational organizations are experiencing a great shift in the way they do the business of education. This shift focuses on accountability, specifically through the expectation of the effective utilization of evaluative-focused efforts to guide and support decisions about educational program implementation. In as much, education leaders need specific guidance and training on how to plan, implement, and use evaluation to critically examine district and school-level initiatives. One specific effort intended to address this need is through the Capacity for Applying Project Evaluation (CAPE) framework. The CAPE framework is composed of three crucial components: a collection of evaluation resources; a professional development model; and a conceptual framework that guides the work to support evaluation planning and implementation in schools and districts. School and district teams serve as active participants in the professional development and ultimately as formative evaluators of their own school or district-level programs by working collaboratively with evaluation experts. The CAPE framework involves the school and district staff in planning and implementing their evaluation. They are the ones deciding what evaluation questions to ask, which instruments to use, what data to collect, and how and to whom results should be reported. Initially this work is done through careful scaffolding by evaluation experts, where supports are slowly pulled away as the educators gain experience and confidence in their knowledge and skills as evaluators. Since CAPE engages all stakeholders in all stages of the evaluation, the philosophical intentions of these efforts to build capacity for formative evaluation strictly aligns with the collaborative evaluation approach. Copyright © 2012 Elsevier Ltd. All rights reserved.

The International AIDS Vaccine Initiative's Capacity Building Activities in East Africa

PubMed Central

Cochrane, Gavin; Robin, Enora; Hanlin, Rebecca; Castle-Clarke, Sophie; MacLure, Calum; Parks, Sarah; Chataway, Joanna

2016-01-01

Abstract The International AIDS Vaccine Initiative (IAVI) is one of a number of Product Development Partnerships created to bridge the gap between scientific and technological potential and the needs of low income populations in low and middle income countries. Specifically IAVI is focused on creating a preventative vaccine for HIV/AIDS. Whilst the remit of IAVI is to create new science, technology and products, its work necessarily involves a wide range of stakeholders and different constituencies in industrially developing and developed countries. Its capacity building activities relate to strengthening the ability to conduct clinical trials and are broad based, spanning scientific and technological capacity through to organisational, advocacy and broader development capabilities. The aim of this study was to deepen IAVI's understanding of how it contributes to capacity building activities in East Africa (Uganda, Kenya and Rwanda), spanning scientific and technological capacity through to organisational, advocacy and broader development capabilities. IAVI's mission to develop an HIV vaccine has become increasingly connected to wider health systems strengthening, through its clinical research activities in East Africa. Since it began its operations in the region, IAVI has made a significant contribution to training interventions to support scientific excellence and good clinical practice and invested in infrastructure and laboratories at Clinical Research Centres in East Africa. Although clear challenges still exist with ensuring sustained investment, accessing marginalized populations and demonstrating progress in capacity building, the experiences of IAVI to date suggest that substantial progress is being made towards wider health systems strengthening in the region. PMID:28083400

[A comparative immunochemical analysis of allergoids and allergens].

PubMed

Fradkin, V A; Tsvetkov, N V; Diakiv, V V; Lavrenchik, E I

1992-01-01

In comparison with allergens having protein fragments with a molecular weight not exceeding 110 kD, allergoids have been found to consist of larger fragments with a molecular weight of 10-150 kD. Allergoids have less charged components than initial allergens and less antigenic components. Allergoids retain their capacity for stimulating the production of antibodies, specific to all antigenic components.

Interaction dynamics: The case of the water sector skills plan in South Africa.

PubMed

Moyo, Laurane; Wehn, Uta

2017-02-01

Despite extensive and continuous efforts to strengthen the capacity of people, organizations and institutions, there is evidence of an increasing gap between the existing and required capacities within the water sector. Consensus seems to be emerging regarding the need for national strategies to improve water sector capacity development. This paper analyses the dynamics of actors' interactions and their characteristics (motivation, cognition and power) during the formulation and implementation of a specific capacity development strategy, namely the Water Sector Skills Plan (SSP) in South Africa. Based on the Contextual Interactive Theory and empirical findings, our analysis indicates slow progression and challenges with implementing the SSP, mainly due to the lack of consultation with key stakeholders during the formulation stage, a lack of data sharing among the target group (the Sector Education Training Authorities), and a lack of capacities within the key implementing organizations. These policy dynamics need to be taken into account when advocating for national capacity development strategies as a solution for challenges with water sector capacity development. The paper proposes the recommendations that are of relevance for the SSP as well as similar initiatives in other countries. Copyright © 2016. Published by Elsevier Ltd.

Carbon felt interlayer derived from rice paper and its synergistic encapsulation of polysulfides for lithium-sulfur batteries

NASA Astrophysics Data System (ADS)

Yang, Kai; Zhong, Lei; Guan, Ruiteng; Xiao, Min; Han, Dongmei; Wang, Shuanjin; Meng, Yuezhong

2018-05-01

Lithium-sulfur (Li-S) batteries have remarkably high theoretical specific capacity as promising candidates for next-generation energy storage. However, the "polysulfides shuttle" effect hampers its commercial application. Here, we use a kind of rice paper as a raw material to get inorganic oxides doping carbon felt by the facile carbonization method, and then modified by a simple coating process using poly (fluorenyl ether ketone) and Super P slurry. The special structure of the carbon felt derived from rice paper and its modified layer endow the final electronic conductive interlayer with inherent polysulfides absorbents and ion Coulombic repulsion functions, respectively, which show synergistic effect for trapping polysulfides. As an interlayer of Li-S batteries, the obtained carbon felt/poly (fluorenyl ether ketone)& Super P (CFSS) interlayer shows excellent electrochemical performance in improving specific capacity and decreasing polarization. The batteries with CFSS interlayer exhibit a high capacity of 837 mA h g-1 at 2.0 C and a high initial capacity of 1073.4 mA h g-1 and good capacity retention of 824.5 mA h g-1 after 500 cycles at 0.5 C. CFSS interlayer also shows excellent anti-self-discharge performance. Therefore, the simple and economical CFSS interlayer can be considered as a promising component for high performance Li-S batteries.

Initiation Capacity of a Specially Shaped Booster Pellet and Numerical Simulation of Its Initiation Process

NASA Astrophysics Data System (ADS)

Hu, Li-Shuang; Hu, Shuang-Qi; Cao, Xiong; Zhang, Jian-Ren

2014-01-01

The insensitive main charge explosive is creating new requirements for the booster pellet of detonation trains. The traditional cylindrical booster pellet has insufficient energy output to reliably initiate the insensitive main charge explosive. In this research, a concave spherical booster pellet was designed. The initiation capacity of the concave spherical booster pellet was studied using varied composition and axial steel dent methods. The initiation process of the concave spherical booster pellet was also simulated by ANSYS/LS-DYNA. The results showed that using a concave spherical booster allows a 42% reduction in the amount of explosive needed to match the initiation capacity of a conventional cylindrical booster of the same dimensions. With the other parameters kept constant, the initiation capacity of the concave spherical booster pellet increases with decreased cone angle and concave radius. The numerical simulation results are in good agreement with the experimental data.

Existing capacity to manage pharmaceuticals and related commodities in East Africa: an assessment with specific reference to antiretroviral therapy

PubMed Central

Waako, Paul J; Odoi-adome, Richard; Obua, Celestino; Owino, Erisa; Tumwikirize, Winnie; Ogwal-okeng, Jasper; Anokbonggo, Willy W; Matowe, Lloyd; Aupont, Onesky

2009-01-01

Background East African countries have in the recent past experienced a tremendous increase in the volume of antiretroviral drugs. Capacity to manage these medicines in the region remains limited. Makerere University, with technical assistance from the USAID supported Rational Pharmaceutical Management Plus (RPM Plus) Program of Management Sciences for Health (MSH) established a network of academic institutions to build capacity for pharmaceutical management in the East African region. The initiative includes institutions from Uganda, Tanzania, Kenya and Rwanda and aims to improve access to safe, effective and quality-assured medicines for the treatment of HIV/AIDS, TB and Malaria through spearheading in-country capacity. The initiative conducted a regional assessment to determine the existing capacity for the management of antiretroviral drugs and related commodities. Methods Heads and implementing workers of fifty HIV/AIDS programs and institutions accredited to offer antiretroviral services in Uganda, Kenya, Tanzania and Rwanda were key informants in face-to-face interviews guided by structured questionnaires. The assessment explored categories of health workers involved in the management of ARVs, their knowledge and practices in selection, quantification, distribution and use of ARVs, nature of existing training programs, training preferences and resources for capacity building. Results Inadequate human resource capacity including, inability to select, quantify and distribute ARVs and related commodities, and irrational prescribing and dispensing were some of the problems identified. A competence gap existed in all the four countries with a variety of healthcare professionals involved in the supply and distribution of ARVs. Training opportunities and resources for capacity development were limited particularly for workers in remote facilities. On-the-job training and short courses were the preferred modes of training. Conclusion There is inadequate capacity for managing medicines and related commodities in East Africa. There is an urgent need for training in aspects of pharmaceutical management to different categories of health workers. Skills building activities that do not take healthcare workers from their places of work are preferred. PMID:19272134

Facile Synthesis of Coaxial CNTs/MnOx-Carbon Hybrid Nanofibers and Their Greatly Enhanced Lithium Storage Performance.

PubMed

Yang, Zunxian; Lv, Jun; Pang, Haidong; Yan, Wenhuan; Qian, Kun; Guo, Tailiang; Guo, Zaiping

2015-12-01

Carbon nanotubes (CNTs)/MnOx-Carbon hybrid nanofibers have been successfully synthesized by the combination of a liquid chemical redox reaction (LCRR) and a subsequent carbonization heat treatment. The nanostructures exhibit a unique one-dimensional core/shell architecture, with one-dimensional CNTs encapsulated inside and a MnOx-carbon composite nanoparticle layer on the outside. The particular porous characteristics with many meso/micro holes/pores, the highly conductive one-dimensional CNT core, as well as the encapsulating carbon matrix on the outside of the MnOx nanoparticles, lead to excellent electrochemical performance of the electrode. The CNTs/MnOx-Carbon hybrid nanofibers exhibit a high initial reversible capacity of 762.9 mAhg(-1), a high reversible specific capacity of 560.5 mAhg(-1) after 100 cycles, and excellent cycling stability and rate capability, with specific capacity of 396.2 mAhg(-1) when cycled at the current density of 1000 mAg(-1), indicating that the CNTs/MnOx-Carbon hybrid nanofibers are a promising anode candidate for Li-ion batteries.

Facile Synthesis of Coaxial CNTs/MnOx-Carbon Hybrid Nanofibers and Their Greatly Enhanced Lithium Storage Performance

PubMed Central

Yang, Zunxian; Lv, Jun; Pang, Haidong; Yan, Wenhuan; Qian, Kun; Guo, Tailiang; Guo, Zaiping

2015-01-01

Carbon nanotubes (CNTs)/MnOx-Carbon hybrid nanofibers have been successfully synthesized by the combination of a liquid chemical redox reaction (LCRR) and a subsequent carbonization heat treatment. The nanostructures exhibit a unique one-dimensional core/shell architecture, with one-dimensional CNTs encapsulated inside and a MnOx-carbon composite nanoparticle layer on the outside. The particular porous characteristics with many meso/micro holes/pores, the highly conductive one-dimensional CNT core, as well as the encapsulating carbon matrix on the outside of the MnOx nanoparticles, lead to excellent electrochemical performance of the electrode. The CNTs/MnOx-Carbon hybrid nanofibers exhibit a high initial reversible capacity of 762.9 mAhg−1, a high reversible specific capacity of 560.5 mAhg−1 after 100 cycles, and excellent cycling stability and rate capability, with specific capacity of 396.2 mAhg−1 when cycled at the current density of 1000 mAg−1, indicating that the CNTs/MnOx-Carbon hybrid nanofibers are a promising anode candidate for Li-ion batteries. PMID:26621615

Preparation, non-isothermal decomposition kinetics, heat capacity and adiabatic time-to-explosion of NTOxDNAZ.

PubMed

Ma, Haixia; Yan, Biao; Li, Zhaona; Guan, Yulei; Song, Jirong; Xu, Kangzhen; Hu, Rongzu

2009-09-30

NTOxDNAZ was prepared by mixing 3,3-dinitroazetidine (DNAZ) and 3-nitro-1,2,4-triazol-5-one (NTO) in ethanol solution. The thermal behavior of the title compound was studied under a non-isothermal condition by DSC and TG/DTG methods. The kinetic parameters were obtained from analysis of the DSC and TG/DTG curves by Kissinger method, Ozawa method, the differential method and the integral method. The main exothermic decomposition reaction mechanism of NTOxDNAZ is classified as chemical reaction, and the kinetic parameters of the reaction are E(a)=149.68 kJ mol(-1) and A=10(15.81)s(-1). The specific heat capacity of the title compound was determined with continuous C(p) mode of microcalorimeter. The standard mole specific heat capacity of NTOxDNAZ was 352.56 J mol(-1)K(-1) in 298.15K. Using the relationship between C(p) and T and the thermal decomposition parameters, the time of the thermal decomposition from initialization to thermal explosion (adiabatic time-to-explosion) was obtained.

Characterizing the correlation between dephosphorization and solution pH in a calcined water treatment plant sludge.

PubMed

Zhou, Zhenming; Liu, Qidi; Li, Shuwen; Li, Fei; Zou, Jing; Liao, Xiaobin; Yuan, Baoling; Sun, Wenjie

2018-04-26

This study focused on characterizing the correlation between the dephosphorization process of calcined water treatment plant sludge (C-WTPS) and the solution initial pH in batch experiments. The specific aim was to illustrate the effect of different initial pH on the adsorption and desorption of phosphorous in C-WTPS. In addition, the effects of solution initial pH on the release of ammonia nitrogen and total organic carbon (TOC) from C-WTPS and the change of pH after adsorption were also investigated. The results demonstrated that the initial pH significantly influenced the adsorption of phosphorus on C-WTPS. When initial pH was increased from 3 to 10, the phosphorous absorption capacity reduced by 76.5%. Especially, when the initial pH reached to 11, the phosphorus adsorption capacity became a negative value, indicating that C-WTPS released phosphorus into the solution. The addition of C-WTPS to the solution had little impact on the initial pH of the solution. The absorbed phosphorous on C-WTPS was relatively stable in the pH range of 3 to 10. Nevertheless, when the solution pH was higher than 11, it can be easily released into the solution. Furthermore, by comparison with WTPS, C-WTPS released less ammonia nitrogen and TOC into the solution and adsorbed more phosphorus from the solution in the experimental pH range. Therefore, C-WTPS is more suitable to serve as a cost-effective sorbent for phosphorus removal.

Rapid adsorption of 2,4-dichlorophenoxyacetic acid by iron oxide nanoparticles-doped carboxylic ordered mesoporous carbon.

PubMed

Tang, Lin; Zhang, Sheng; Zeng, Guang-Ming; Zhang, Yi; Yang, Gui-De; Chen, Jun; Wang, Jing-Jing; Wang, Jia-Jia; Zhou, Yao-Yu; Deng, Yao-Cheng

2015-05-01

The ordered mesoporous carbon composite functionalized with carboxylate groups and iron oxide nanoparticles (Fe/OMC) was successfully prepared and used to adsorb 2,4-dichlorophenoxyacetic acid (2,4-D) from wastewater. The resultant adsorbent possessed high degree of order, large specific surface area and pore volume, and good magnetic properties. The increase in initial pollutant concentration and contact time would make the adsorption capacity increase, but the pH and temperature are inversely proportional to 2,4-D uptake. The equilibrium of adsorption was reached within 120 min, and the equilibrated adsorption capacity increased from 99.38 to 310.78 mg/g with the increase of initial concentration of 2,4-D from 100 to 500 mg/L. Notablely, the adsorption capacity reached 97% of the maximum within the first 5 min. The kinetics and isotherm study showed that the pseudo-second-order kinetic and Langmuir isotherm models could well fit the adsorption data. These results indicate that Fe/OMC has a good potential for the rapid adsorption of 2,4-D and prevention of its further diffusion. Copyright © 2014 Elsevier Inc. All rights reserved.

Anxiety sensitivity and working memory capacity: Risk factors and targets for health behavior promotion.

PubMed

Otto, Michael W; Eastman, Abraham; Lo, Stephen; Hearon, Bridget A; Bickel, Warren K; Zvolensky, Michael; Smits, Jasper A J; Doan, Stacey N

2016-11-01

Understanding the nature and influence of specific risk profiles is increasingly important for health behavior promotion. The purpose of this article is to document the value of two factors-anxiety sensitivity (AS) and working memory capacity (WMC)-for enhancing risk for the initiation and/or maintenance of a range of negative health behaviors. AS is a distress-related risk factor that potentiates avoidance/coping motivations for negative health behaviors. Stress provides the conditions for negative somatic and affective states, and AS amplifies the aversiveness of these experiences and correspondingly hinders adaptive functioning. In contrast, low WMC is hypothesized to exert its effect by decreasing the capacity to filter out current temptations, attenuating a focus on longer-term goals and impairing the application of relevant coping skills at times of stress. In this review, we provide conceptual models for the separate roles of high AS and low WMC in negative health behaviors, review the influence of these factors on specific health behavior exemplars (eating behaviors/obesity, physical activity, smoking, alcohol use, and sleep promotion), provide preliminary evidence for their value as independent treatment targets for health-behavior promotion, and encourage specific research directions in relation to these variables. Copyright © 2016. Published by Elsevier Ltd.

An Investigation into the Capacity of Student Motivation and Emotion Regulation Strategies to Predict Engagement and Resilience in the Middle School Classroom

ERIC Educational Resources Information Center

Fried, Leanne; Chapman, Elaine

2012-01-01

Although most of the initial research on self-regulated learning focused on cognitive and meta-cognitive aspects, there has been a growing interest in the emotion and motivation domains of self-regulation. This article reports on research undertaken to investigate specific motivation and emotion regulation strategies used by middle school students…

Lithium/disulfide battery R and D

NASA Astrophysics Data System (ADS)

Kaun, T. D.; Deluca, W.; Lee, J.; Redey, L.; Nelson, P. A.

The focus of molten-salt cell R and D in the past year at Argonne National Laboratory has been on developing an understanding of the excellent performance and stability of a lithium/disulfide cell using LiCl-LiBr-KBr electrolyte. For further improvement, we have initiated development of a rod-electrode cell design and design of cells which can tolerate overdischarge and overcharge abuse. Earlier Li/FeS2 cells offered performance quite below expectations and had high capacity decline rates: 0.10 to 0.25 percent per cycle. Approaches for reducing the capacity decline rates of the earlier cells also reduced cell performance. However, our improved Li/FeS2 cell tests indicate good prospects for attaining cell development goals of specific energy of 200 Wh/kg at a 4-h discharge rate, a specific power of 200 W/kg at 80 percent depth of discharge, and a cycle life of 1000 cycles.

Nondestructive Characterization Techniques Used for Ceramic Matrix Composite Life Determination

NASA Technical Reports Server (NTRS)

Effinger, Michael; Koenig, John; Ellingson, Bill; Spohnholtz, Todd

2000-01-01

Recent results indicate that the specific damping capacity and resonant frequency measurements taken periodically during a component's lifetime is able to quantify the mechanical fatigue of CMCS. This gives hope for the potential of determining the actual and residual life of CMC materials using a combination of nondestructive techniques. If successful, then this new paradigm for life prediction of CMCs could revolutionize the approach for designing and servicing CMC components, thereby significantly reducing costs for design, development, health monitoring, and maintenance of CMC components and systems. The Nondestructive Characterization (NDC) life prediction approach would complement life prediction using micromechanics and continuum finite element models. This paper reports on the initial concept of NDC life prediction, a review of the C/SiC blisk damping data, and how changes in the specific damping capacity & ultrasonic elastic modulus data have established the concept as a possibility.

Comparison of cytomegalovirus (CMV)-specific neutralization capacity of hyperimmunoglobulin (HIG) versus standard intravenous immunoglobulin (IVIG) preparations: Impact of CMV IgG normalization.

PubMed

Schampera, Matthias Stefan; Schweinzer, Katrin; Abele, Harald; Kagan, Karl Oliver; Klein, Reinhild; Rettig, Ingo; Jahn, Gerhard; Hamprecht, Klaus

2017-05-01

Based on a non-randomized study of Nigro et al. (2005) the intravenous administration of hyperimmunoglobulins (HIGs) is applied frequently to women with primary CMV-infection as "off-label use" in Germany. In order to describe their CMV-specific neutralization-capacity in vitro, we analyzed the HIG preparations Cytotect ® , and Cytogam ® as well as the standard intravenous immunoglobulins (IVIG) Octagam ® , Gamunex ® , Kiovig ® . We performed short-term cell-free CMV neutralization assays (CFNT) and long-term cell-adapted neutralization-plaque-reduction assays (PRANT). Human retinal epithelial cells (ARPE-19) were used as target cells. A clinical CMV primary-isolate from amnion fluid propagated in epithelial cells without any initial fibroblast adaption was used. For calibration we previously generated serum-pools (N=100) from two cohorts of mothers at birth: seronegative and latently CMV-infected mothers. Biochemical analysis included total protein, albumin, Ig-class, and IgG-subclasses. Additionally, CMV antibody-reactivity was checked using recombinant immunoblotting. HIG and IVIG preparations showed differences in levels and patterns of protein, Ig-class and CMV-specific antibody concentrations. All IgG-preparations showed high in vitro NT-capacity and high IgG-avidity. The NT 90 -values for HIGs and IVIGs and our seropositive reference-pool showed similar NT-capacity at a dilution of (1:100) which corresponded well to 4.1 PEI-Units/ml. All HIG- and IVIG-preparations showed similar NT-capacity following CMV IgG-normalization. Our in vitro results are in strong contrast to former findings suggesting higher functional CMV NT titers in IVIG-preparations compared to HIGs. Copyright © 2017 Elsevier B.V. All rights reserved.

Constructing hierarchical submicrotubes from interconnected TiO2 nanocrystals for high reversible capacity and long-life lithium-ion batteries

NASA Astrophysics Data System (ADS)

Xin, Ling; Liu, Yong; Li, Baojun; Zhou, Xiang; Shen, Hui; Zhao, Wenxia; Liang, Chaolun

2014-03-01

Here, we report a facile hydrothermal approach for synthesizing anatase TiO2 hierarchical mesoporous submicrotubes (ATHMSs) with the aid of long-chain polymer as soft template. The TiO2 nanocrystals, with sizes of 6-8 nm, are well interconnected with each other to build tubular architectures with diameters of 0.3-1.5 μm and lengths of 10-25 μm. Such highly porous structures give rise to very large specific surface area of 201.9 m2 g-1 and 136.8 m2 g-1 for the as-prepared and annealed samples, respectively. By using structurally stable ATHMSs as anode materials for lithium-ion batteries, they exhibited high reversible capacity, long cycling life and excellent cycling stability. Even after 1000 cycles, such ATHMS electrodes retained a reversible discharge capacity as high as 150 mAh g-1 at the current density of 1700 mA g-1, maintaining 92% of the initial discharge capacity (163 mAh g-1).

Reduced Graphene Oxide-Wrapped FeS2 Composite as Anode for High-Performance Sodium-Ion Batteries

NASA Astrophysics Data System (ADS)

Wang, Qinghong; Guo, Can; Zhu, Yuxuan; He, Jiapeng; Wang, Hongqiang

2018-06-01

Iron disulfide is considered to be a potential anode material for sodium-ion batteries due to its high theoretical capacity. However, its applications are seriously limited by the weak conductivity and large volume change, which results in low reversible capacity and poor cycling stability. Herein, reduced graphene oxide-wrapped FeS2 (FeS2/rGO) composite was fabricated to achieve excellent electrochemical performance via a facile two-step method. The introduction of rGO effectively improved the conductivity, BET surface area, and structural stability of the FeS2 active material, thus endowing it with high specific capacity, good rate capability, as well as excellent cycling stability. Electrochemical measurements show that the FeS2/rGO composite had a high initial discharge capacity of 1263.2 mAh g-1 at 100 mA g-1 and a high discharge capacity of 344 mAh g-1 at 10 A g-1, demonstrating superior rate performance. After 100 cycles at 100 mA g-1, the discharge capacity remained at 609.5 mAh g-1, indicating the excellent cycling stability of the FeS2/rGO electrode.

An integrated approach to evaluate food antioxidant capacity.

PubMed

Sun, T; Tanumihardjo, S A

2007-11-01

Many methods are available for determining food antioxidant capacity, which is an important topic in food and nutrition research and marketing. However, the results and inferences from different methods may vary substantially because each complex chemical reaction generates unique values. To get a complete and dynamic picture of the ranking of food antioxidant capacity, relative antioxidant capacity index (RACI), a hypothetical concept, is created from the perspective of statistics by integrating the antioxidant capacity values generated from different in vitro methods. RACI is the mean value of standard scores transformed from the initial data generated with different methods for each food item. By comparing the antioxidant capacity of 20 commonly consumed vegetables in the U.S. market that were measured with 7 chemical methods, we demonstrated that the RACI correlated strongly with each method. The significant correlation of RACI with an independent data set further confirmed that RACI is a valid tool to assess food antioxidant capacity. The key advantage of this integrated approach is that RACI is in a numerical scale with no units and has consistent agreement with chemical methods. Although it is a relative index and may not represent a specific antioxidant property of different food items, RACI provides a reasonably accurate rank of antioxidant capacity among foods. Therefore, it can be used as an integrated approach to evaluate food antioxidant capacity.

Strengthening capacity for AIDS vaccine research: analysis of the Pfizer Global Health Fellows Program and the International AIDS Vaccine Initiative

PubMed Central

2013-01-01

Background Industry partnerships can help leverage resources to advance HIV/AIDS vaccine research, service delivery, and policy advocacy goals. This often involves capacity building for international and local non-governmental organizations (NGOs). International volunteering is increasingly being used as a capacity building strategy, yet little is known about how corporate volunteers help to improve performance of NGOs in the fight against HIV/AIDS. Methods This case study helps to extend our understanding by analyzing how the Pfizer Global Health Fellows (GHF) program helped develop capacity of the International AIDS Vaccine Initiative (IAVI), looking specifically at Fellowship activities in South Africa, Kenya, and Uganda. From 2005–2009, 8 Pfizer GHF worked with IAVI and local research centers to strengthen capacity to conduct and monitor vaccine trials to meet international standards and expand trial activities. Data collection for the case study included review of Fellow job descriptions, online journals, evaluation reports, and interviews with Fellows and IAVI staff. Qualitative methods were used to analyze factors which influenced the process and outcomes of capacity strengthening. Results Fellows filled critical short-term expert staffing needs at IAVI as well as providing technical assistance and staff development activities. Capacity building included assistance in establishing operating procedures for the start-up period of research centers; training staff in Good Clinical Practice (GCP); developing monitoring capacity (staff and systems) to assure that centers are audit-ready at all times; and strategic planning for data management systems. Factors key to the success of volunteering partnerships included similarities in mission between the corporate and NGO partners, expertise and experience of Fellows, and attitudes of partner organization staff. Conclusion By developing standard operating procedures, ensuring that monitoring and regulatory compliance systems were in place, training African investigators and community members, and engaging in other systems strengthening activities, the GHF program helped IAVI to accelerate vaccine development activities in the field, and to develop the organization’s capacity to manage change in the future. Our study suggests that a program of sustained corporate volunteering over several years may increase organizational learning and trust, leading to stronger capacity to advance and achieve NGO goals. PMID:24088300

Strengthening capacity for AIDS vaccine research: analysis of the Pfizer Global Health Fellows program and the International AIDS Vaccine Initiative.

PubMed

Vian, Taryn; Koseki, Sayaka; Feeley, Frank G; Beard, Jennifer

2013-10-02

Industry partnerships can help leverage resources to advance HIV/AIDS vaccine research, service delivery, and policy advocacy goals. This often involves capacity building for international and local non-governmental organizations (NGOs). International volunteering is increasingly being used as a capacity building strategy, yet little is known about how corporate volunteers help to improve performance of NGOs in the fight against HIV/AIDS. This case study helps to extend our understanding by analyzing how the Pfizer Global Health Fellows (GHF) program helped develop capacity of the International AIDS Vaccine Initiative (IAVI), looking specifically at Fellowship activities in South Africa, Kenya, and Uganda. From 2005-2009, 8 Pfizer GHF worked with IAVI and local research centers to strengthen capacity to conduct and monitor vaccine trials to meet international standards and expand trial activities. Data collection for the case study included review of Fellow job descriptions, online journals, evaluation reports, and interviews with Fellows and IAVI staff. Qualitative methods were used to analyze factors which influenced the process and outcomes of capacity strengthening. Fellows filled critical short-term expert staffing needs at IAVI as well as providing technical assistance and staff development activities. Capacity building included assistance in establishing operating procedures for the start-up period of research centers; training staff in Good Clinical Practice (GCP); developing monitoring capacity (staff and systems) to assure that centers are audit-ready at all times; and strategic planning for data management systems. Factors key to the success of volunteering partnerships included similarities in mission between the corporate and NGO partners, expertise and experience of Fellows, and attitudes of partner organization staff. By developing standard operating procedures, ensuring that monitoring and regulatory compliance systems were in place, training African investigators and community members, and engaging in other systems strengthening activities, the GHF program helped IAVI to accelerate vaccine development activities in the field, and to develop the organization's capacity to manage change in the future. Our study suggests that a program of sustained corporate volunteering over several years may increase organizational learning and trust, leading to stronger capacity to advance and achieve NGO goals.

76 FR 33332 - Announcement of Funding Awards for the Technical Assistance and Capacity Building under the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-08

... of key Departmental objectives, including but not limited to, energy efficiency and green building... Awards for the Technical Assistance and Capacity Building under the Transformation Initiative Program...) for the Technical Assistance and Capacity Building under the Transformation Initiative program for...

Facile synthesis of Sb2S3/MoS2 heterostructure as anode material for sodium-ion batteries.

PubMed

Zhang, Zhendong; Zhao, Jiachang; Xu, Meilan; Wang, Hongxia; Gong, Yanmei; Xu, Jingli

2018-05-18

A novel Sb2S3/MoS2 heterostructure in which Sb2S3 nanorods are coated with MoS2 nanosheets to form core-shell structure has been fabricated via a facile two-step hydrothermal process. The Sb2S3/MoS2 heterostructure utilized as anode of sodium-ion batteries (SIBs) shows higher capacity, superior rate capability and better cycling performance compared with individual Sb2S3 nanorods and MoS2 nanosheets. Specifically, the Sb2S3/MoS2 electrode shows an initial reversible capacity of 701 mAh g-1 at the current density of 100 mA g-1, which is remained 80.1% of the initial perforance after 100 cycles at the same current density. This outstanding electrochemical performance indicates Sb2S3/MoS2 heterostructure is a very promising anode material for high-performance SIBs. © 2018 IOP Publishing Ltd.

Netbook - A Toolset in Support of a Collaborative and Cooperative Learning Environment.

DTIC Science & Technology

1996-04-26

Netbook is a software development/research project being conducted for the DARPA computer aided training initiative (CEATI). As a part of the SNAIR...division of CEATI, Netbook concerns itself with the management of Internet resources. More specifically, Netbook is a toolset that allows students...a meaningful way. In addition Netbook provides the capacity for communication with peers and teachers, enabling students to collaborate while engaged

Adsorption equilibrium and dynamics of gasoline vapors onto polymeric adsorbents.

PubMed

Jia, Lijuan; Yu, Weihua; Long, Chao; Li, Aimin

2014-03-01

The emission of gasoline vapors is becoming a significant environmental problem especially for the population-dense area and also results in a significant economic loss. In this study, adsorption equilibrium and dynamics of gasoline vapors onto macroporous and hypercrosslinked polymeric resins at 308 K were investigated and compared with commercial activated carbon (NucharWV-A 1100). The results showed that the equilibrium and breakthrough adsorption capacities of virgin macroporous and hypercrosslinked polymeric resins were lower than virgin-activated carbon. Compared with origin adsorbents, however, the breakthrough adsorption capacities of the regenerated activated carbon for gasoline vapors decreased by 58.5 % and 61.3 % when the initial concentration of gasoline vapors were 700 and 1,400 mg/L, while those of macroporous and hypercrosslinked resins decreased by 17.4 % and 17.5 %, and 46.5 % and 45.5 %, respectively. Due to the specific bimodal property in the region of micropore (0.5-2.0 nm) and meso-macropore (30-70 nm), the regenerated hypercrosslinked polymeric resin exhibited the comparable breakthrough adsorption capacities with the regenerated activated carbon at the initial concentration of 700 mg/L, and even higher when the initial concentration of gasoline vapors was 1,400 mg/L. In addition, 90 % of relative humidity had ignorable effect on the adsorption of gasoline vapors on hypercrosslinked polymeric resin. Taken together, it is expected that hypercrosslinked polymeric adsorbent would be a promising adsorbent for the removal of gasoline vapors from gas streams.

Influence of Low Molecular Weight Fractions of Humic Substances on Their Reducing Capacities and Distribution of Redox Functional Groups.

NASA Astrophysics Data System (ADS)

Yang, Z.; Jiang, J.

2015-12-01

Humic substances (HS) are redox-active organic compounds and their reducing capacities depend on molecule structure and distribution of redox functional groups (RFG). During dialysis experiments, initial HS were separated into low molecular weight fractions (LMWF, molecular weight <3,500 Da or <14,000 Da) and retentate. LMWF accounts for only 2% in TOC contents of HS molecules, while their reducing capacities are up to 33 times greater than those of initial HA. However, great amount of reducing capacities of LMWF does not cause decreasing reducing capacities of retentate relative to those of initial HA. Total reducing capacities of whole dialysis device were calculated for initial HA, retentate and LMWF in native and reduced state, and result suggests that releasing of LMWF leads to production and explosion of RFG. LWMF have great fluorescence intensities for protein-like fluorophores and humic acids-like fluorophores (quinone-like functional groups), where quinonoid π-π* transition is responsible for the great reducing capacities of LMWF. The 3,500 Da molecules (0.25 nm diameter) of HS are capable of stimulating transformation of redox-active metals or potential pollutants trapped in soil micropores (< 2 nm diameter). A development of relationship between reducing capacity and Ex / Em position provides a possibility to predicate relative reducing capacities of HS in treated raw water sample.

Enhanced capacity of chemically bonded phosphorus/carbon composite as an anode material for potassium-ion batteries

NASA Astrophysics Data System (ADS)

Wu, Xuan; Zhao, Wei; Wang, Hong; Qi, Xiujun; Xing, Zheng; Zhuang, Quanchao; Ju, Zhicheng

2018-02-01

Potassium-ion batteries are attracting great attention as a promising alternative to lithium-ion batteries due to the abundance and low price of potassium. Herein, the phosphorus/carbon composite, obtained by a simple ball-milling of 20 wt% commercial red phosphorus and 80 wt% graphite, is studied as a novel anode for potassium-ion batteries. Considering the high theoretical specific capacity of phosphorus and formation of stable phosphorus-carbon bond, which can alleviate the volume expansion efficiently, the phosphorus/carbon composite exhibits a high charge capacity of 323.5 mA h g-1 after 50 cycles at a current density of 50 mA g-1 with moderate rate capability and cycling stability. By the X-ray diffraction analysis, the alloying-dealloying mechanism of phosphorus is proposed to form a KP phase. Meanwhile, prepotassiation treatment is conducted to improve the low initial coulomb efficiency.

Common and Specific Protein Accumulation Patterns in Different Albino/Pale-Green Mutants Reveals Regulon Organization at the Proteome Level1[W

PubMed Central

Motohashi, Reiko; Rödiger, Anja; Agne, Birgit; Baerenfaller, Katja; Baginsky, Sacha

2012-01-01

Research interest in proteomics is increasingly shifting toward the reverse genetic characterization of gene function at the proteome level. In plants, several distinct gene defects perturb photosynthetic capacity, resulting in the loss of chlorophyll and an albino or pale-green phenotype. Because photosynthesis is interconnected with the entire plant metabolism and its regulation, all albino plants share common characteristics that are determined by the switch from autotrophic to heterotrophic growth. Reverse genetic characterizations of such plants often cannot distinguish between specific consequences of a gene defect from generic effects in response to perturbations in photosynthetic capacity. Here, we set out to define common and specific features of protein accumulation in three different albino/pale-green plant lines. Using quantitative proteomics, we report a common molecular phenotype that connects the loss of photosynthetic capacity with other chloroplast and cellular functions, such as protein folding and stability, plastid protein import, and the expression of stress-related genes. Surprisingly, we do not find significant differences in the expression of key transcriptional regulators, suggesting that substantial regulation occurs at the posttranscriptional level. We examine the influence of different normalization schemes on the quantitative proteomics data and report all identified proteins along with their fold changes and P values in albino plants in comparison with the wild type. Our analysis provides initial guidance for the distinction between general and specific adaptations of the proteome in photosynthesis-impaired plants. PMID:23027667

Increasing Capacity for Stewardship of Oceans and Coasts: Findings of the National Research Council Report

NASA Astrophysics Data System (ADS)

Roberts, S. J.; Feeley, M. H.

2008-05-01

With the increasing stress on ocean and coastal resources, ocean resource management will require greater capacity in terms of people, institutions, technology and tools. Successful capacity-building efforts address the needs of a specific locale or region and include plans to maintain and expand capacity after the project ends. In 2008, the US National Research Council published a report that assesses past and current capacity-building efforts to identify barriers to effective management of coastal and marine resources. The report recommends ways that governments and organizations can strengthen marine conservation and management capacity. Capacity building programs instill the tools, knowledge, skills, and attitudes that address: ecosystem function and change; processes of governance that influence societal and ecosystem change; and assembling and managing interdisciplinary teams. Programs require efforts beyond traditional sector-by-sector planning because marine ecosystems range from the open ocean to coastal waters and land use practices. Collaboration among sectors, scaling from local community-based management to international ocean policies, and ranging from inland to offshore areas, will be required to establish coordinated and efficient governance of ocean and coastal ecosystems. Barriers Most capacity building activities have been initiated to address particular issues such as overfishing or coral reef degradation, or they target a particular region or country facing threats to their marine resources. This fragmentation inhibits the sharing of information and experience and makes it more difficult to design and implement management approaches at appropriate scales. Additional barriers that have limited the effectiveness of capacity building programs include: lack of an adequate needs assessment prior to program design and implementation; exclusion of targeted populations in decision- making efforts; mismanagement, corruption, or both; incomplete or inappropriate evaluation procedures; and, lack of a coordinated and strategic approach among donors. A New Framework Improving ocean stewardship and ending the fragmentation of current capacity building programs will require a new, broadly adopted framework for capacity building that emphasizes cooperation, sustainability, and knowledge transfer within and among communities. The report identifies four specific features of capacity building that would increase the effectiveness and efficiency of future programs: 1. Regional action plans based on periodic program assessments to guide investments in capacity and set realistic milestones and performance measures. 2. Long-term support to establish self-sustaining programs. Sustained capacity building programs require a diversity of sources and coordinated investments from local, regional, and international donors. 3. Development of leadership and political will. One of the most commonly cited reasons for failure and lack of progress in ocean and coastal governance initiatives is lack of political will. One strategy for strengthening support is to identify, develop, mentor, and reward leaders. 4. Establishment of networks and mechanisms for regional collaboration. Networks bring together those working in the same or similar ecosystems with comparable management or governance challenges to share information, pool resources, and learn from one another. The report also recommends the establishment of regional centers to encourage and support collaboration among neighboring countries.

Encapsulation of Fe3O4 Nanoparticles into N, S co-Doped Graphene Sheets with Greatly Enhanced Electrochemical Performance

PubMed Central

Yang, Zunxian; Qian, Kun; Lv, Jun; Yan, Wenhuan; Liu, Jiahui; Ai, Jingwei; Zhang, Yuxiang; Guo, Tailiang; Zhou, Xiongtu; Xu, Sheng; Guo, Zaiping

2016-01-01

Particular N, S co-doped graphene/Fe3O4 hybrids have been successfully synthesized by the combination of a simple hydrothermal process and a subsequent carbonization heat treatment. The nanostructures exhibit a unique composite architecture, with uniformly dispersed Fe3O4 nanoparticles and N, S co-doped graphene encapsulant. The particular porous characteristics with many meso/micro holes/pores, the highly conductive N, S co-doped graphene, as well as the encapsulating N, S co-doped graphene with the high-level nitrogen and sulfur doping, lead to excellent electrochemical performance of the electrode. The N-S-G/Fe3O4 composite electrode exhibits a high initial reversible capacity of 1362.2 mAhg−1, a high reversible specific capacity of 1055.20 mAhg−1 after 100 cycles, and excellent cycling stability and rate capability, with specific capacity of 556.69 mAhg−1 when cycled at the current density of 1000 mAg−1, indicating that the N-S-G/Fe3O4 composite is a promising anode candidate for Li-ion batteries. PMID:27296103

Microwave-Assisted Preparation and Characterization of a Polyoxometalate-Based Inorganic 2D Framework Anode for Enhancing Lithium-Ion Battery Performance.

PubMed

Nie, Yan-Mei; Liang, Shuang; Yu, Wei-Dong; Yuan, Hao; Yan, Jun

2018-05-04

A pure inorganic 2D network molybdophosphate, [Mn 3 Mo 12 O 24 (OH) 6 (HPO 3 ) 8 (H 2 O) 6 ] 4- (1 a), synthesized through microwave irradiation with the existence of Mn 2+ and organic cations and isolated as [(CH 3 ) 2 NH 2 ] 3 Na[Mn 3 Mo 12 O 24 (OH) 6 (HPO 3 ) 8 (H 2 O) 6 ]⋅12 H 2 O (1), is found to possess highly enhanced performance in lithium-ion batteries' anode materials. The molecule shows multielectron redox properties suitable for producing anode materials with a specific capacity of 602 mA h g -1 at 100 mA g -1 after 50 cycles in lithium-ion batteries, although its specific capacity is the highest among all the reported pure inorganic 2D polyoxometalates to date, the cyclic stability is not that satisfactory. A hybrid nanocomposite of this 2D network and polypyrrole cations effectively reduces the capacity fading in initial cycles, and increases the stability and improves the electrochemical performance of lithium-ion batteries as well. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Human factors for capacity building: lessons learned from the OpenMRS implementers network.

PubMed

Seebregts, C J; Mamlin, B W; Biondich, P G; Fraser, H S F; Wolfe, B A; Jazayeri, D; Miranda, J; Blaya, J; Sinha, C; Bailey, C T; Kanter, A S

2010-01-01

The overall objective of this project was to investigate ways to strengthen the OpenMRS community by (i) developing capacity and implementing a network focusing specifically on the needs of OpenMRS implementers, (ii) strengthening community-driven aspects of OpenMRS and providing a dedicated forum for implementation-specific issues, and; (iii) providing regional support for OpenMRS implementations as well as mentorship and training. The methods used included (i) face-to-face networking using meetings and workshops; (ii) online collaboration tools, peer support and mentorship programmes; (iii) capacity and community development programmes, and; (iv) community outreach programmes. The community-driven approach, combined with a few simple interventions, has been a key factor in the growth and success of the OpenMRS Implementers Network. It has contributed to implementations in at least twenty-three different countries using basic online tools; and provided mentorship and peer support through an annual meeting, workshops and an internship program. The OpenMRS Implementers Network has formed collaborations with several other open source networks and is evolving regional OpenMRS Centres of Excellence to provide localized support for OpenMRS development and implementation. These initiatives are increasing the range of functionality and sustainability of open source software in the health domain, resulting in improved adoption and enterprise-readiness. Social organization and capacity development activities are important in growing a successful community-driven open source software model.

A theoretical and empirical framework for constructing culture-specific stigma instruments for Chile

PubMed Central

Yang, Lawrence H.; Valencia, Elie; Alvarado, Ruben; Link, Bruce; Huynh, Nina; Nguyen, Kristy; Morita, Kara; Saavedra, Mariella; Wong, Chak; Galea, Sandro; Susser, Ezra

2013-01-01

Different cultural contexts contribute to substantial variation in the stigma faced by people with psychosis globally. We propose a new formulation of how culture affects stigma to create psychometrically-validated tools to assess stigma’s culture-specific effects. We propose to construct culture-specific stigma measures for the Chilean context via: 1) open-ended administration of ‘universal’ stigma scales to a sample of individuals with psychosis, relatives, and community respondents; 2) qualitative analyses to identify how culture shapes stigma and to derive initial ‘culture-specific’ stigma items; 3) construction and pilot-testing of final ‘culture-specific’ stigma measures; 4) initial psychometric validation among a sample of individuals with psychosis. We identify initial hypotheses for how stigma might threaten the capacities to participate in fundamental activities that ‘matter most’ in the Chilean context. These include mental illness stigma threatening the man’s ability to protect the honor of the family, and the woman’s ability to be a ‘holy and pure’ mother. Mental illness stigma may further endanger the ability of the family to uphold reciprocal obligations within their social network. Developing such measures promises to aid efforts to address culture-specific forms of stigma, and to facilitate implementation of community mental health services, in Chile and other Latin American contexts. PMID:23990755

Assessing and Reporting Dancer Capacities, Risk Factors, and Injuries: Recommendations from the IADMS Standard Measures Consensus Initiative.

PubMed

Liederbach, Marijeanne; Hagins, Marshall; Gamboa, Jennifer M; Welsh, Thomas M

2012-12-01

This technical report of the Standard Measures Consensus Initiative of the International Association for Dance Medicine and Science (IADMS) describes the results of the committee’s multi-year effort to synthesize information regarding the tests and measures used in dance-related research, protocols for reporting injuries, and appropriate use of available technologies to aid in standardizing such matters. Specific recommendations are presented, with accompanying rationales, to facilitate consensus among members of the dance medicine and science community. An Executive Summary of this Technical Report, which contains implementation strategies and appendices, should soon be available on the IADMS website.

Facile Synthesis of Bowl-Like LiFePO4/C Composite with High Rate-Performance

NASA Astrophysics Data System (ADS)

Jing, Peng; Yao, Lei; Xiang, Mingwu; Wang, Yan; Wu, Jinhua; Wang, Boya; Zhang, Yun; Wu, Hao; Liu, Heng

2018-07-01

Olivine-structured LiFePO4/C composites with high rate-performance were synthesized via an industrial spray-drying technique using a low cost Fe3O4 as iron source. The as-obtained LiFePO4/C exhibits a unique bowl-like morphology with a particle size of 2-5 μm in diameter. A continuous uniform carbon coating layer on the surface of LiFePO4/C cathodes promotes fast electron transport, whilst it guarantees the favorable electrochemical reaction. Especially the formation of porous structure leads to an average pore volume of 0.127 cm3 g-1 and a high specific surface area of 34.46 m2 g-1, which is conducive to facilitating the penetration of electrolyte and providing the more contact area of electrolyte with LiFePO4/C. As a result, the as-prepared LiFePO4/C cathode material delivers an outstanding discharge capacity of 102.1 mAh g-1, 94.2% of the initial capacity (108.3 mAh g-1), after 1000 cycles at 10 C. Even at an ultrahigh current rate of 50 C, it still shows an initial discharge capacity of 58 mAh g-1.

Facile Synthesis of Bowl-Like LiFePO4/C Composite with High Rate-Performance

NASA Astrophysics Data System (ADS)

Jing, Peng; Yao, Lei; Xiang, Mingwu; Wang, Yan; Wu, Jinhua; Wang, Boya; Zhang, Yun; Wu, Hao; Liu, Heng

2018-03-01

Olivine-structured LiFePO4/C composites with high rate-performance were synthesized via an industrial spray-drying technique using a low cost Fe3O4 as iron source. The as-obtained LiFePO4/C exhibits a unique bowl-like morphology with a particle size of 2-5 μm in diameter. A continuous uniform carbon coating layer on the surface of LiFePO4/C cathodes promotes fast electron transport, whilst it guarantees the favorable electrochemical reaction. Especially the formation of porous structure leads to an average pore volume of 0.127 cm3 g-1 and a high specific surface area of 34.46 m2 g-1, which is conducive to facilitating the penetration of electrolyte and providing the more contact area of electrolyte with LiFePO4/C. As a result, the as-prepared LiFePO4/C cathode material delivers an outstanding discharge capacity of 102.1 mAh g-1, 94.2% of the initial capacity (108.3 mAh g-1), after 1000 cycles at 10 C. Even at an ultrahigh current rate of 50 C, it still shows an initial discharge capacity of 58 mAh g-1.

Immunotherapy targeting HER2 with genetically modified T cells eliminates tumor-initiating cells in osteosarcoma.

PubMed

Rainusso, N; Brawley, V S; Ghazi, A; Hicks, M J; Gottschalk, S; Rosen, J M; Ahmed, N

2012-03-01

Despite radical surgery and multi-agent chemotherapy, less than one third of patients with recurrent or metastatic osteosarcoma (OS) survive. The limited efficacy of current therapeutic approaches to target tumor-initiating cells (TICs) may explain this dismal outcome. The purpose of this study was to assess the impact of modified T cells expressing a human epidermal growth factor receptor (HER2)-specific chimeric antigen receptor in the OS TIC compartment of human established cell lines. Using the sarcosphere formation assay, we found that OS TICs were resistant to increasing methotrexate concentrations. In contrast, HER2-specific T cells decreased markedly sarcosphere formation capacity and the ability to generate bone tumors in immunodeficient mice after orthotopic transplantation. In vivo, administration of HER2-specific T cells significantly reduced TICs in bulky tumors as judged by decreased sarcosphere forming efficiency in OS cells isolated from explanted tumors. We demonstrate that HER2-specific T cells target drug resistant TICs in established OS cell lines, suggesting that incorporating immunotherapy into current treatment strategies for OS has the potential to improve outcomes.

Evaluation program for secondary spacecraft cells. Initial evaluation tests of General Electric Company 4.0 ampere-hour nickel-cadmium spacecraft cells for the AMPTE satellite program

NASA Technical Reports Server (NTRS)

Harkness, J. D.

1984-01-01

Cells found to have electrolyte leakage, internal shorts, low capacity, or inability of any cell to recover its open circuit voltage above 1.150 volts during the internal short test are addressed. The Active Magnetic Particle Tracer Explorer (AMPTE) cell design was characterized and the effects of specific mission parameters on cell life were demonstrated.

Temporal precision and the capacity of auditory-verbal short-term memory.

PubMed

Gilbert, Rebecca A; Hitch, Graham J; Hartley, Tom

2017-12-01

The capacity of serially ordered auditory-verbal short-term memory (AVSTM) is sensitive to the timing of the material to be stored, and both temporal processing and AVSTM capacity are implicated in the development of language. We developed a novel "rehearsal-probe" task to investigate the relationship between temporal precision and the capacity to remember serial order. Participants listened to a sub-span sequence of spoken digits and silently rehearsed the items and their timing during an unfilled retention interval. After an unpredictable delay, a tone prompted report of the item being rehearsed at that moment. An initial experiment showed cyclic distributions of item responses over time, with peaks preserving serial order and broad, overlapping tails. The spread of the response distributions increased with additional memory load and correlated negatively with participants' auditory digit spans. A second study replicated the negative correlation and demonstrated its specificity to AVSTM by controlling for differences in visuo-spatial STM and nonverbal IQ. The results are consistent with the idea that a common resource underpins both the temporal precision and capacity of AVSTM. The rehearsal-probe task may provide a valuable tool for investigating links between temporal processing and AVSTM capacity in the context of speech and language abilities.

Building policy-making capacity in the Ministry of Health: the Kazakhstan experience.

PubMed

Chanturidze, Tata; Adams, Orvill; Tokezhanov, Bolat; Naylor, Mike; Richardson, Erica

2015-01-20

Recent economic growth in Kazakhstan has been accompanied by slower improvements in population health and this has renewed impetus for health system reform. Strengthening strategic planning and policy-making capacity in the Ministry of Health has been identified as an important priority, particularly as the Ministry of Health is leading the health system reform process. The intervention was informed by the United Nations Development Programme (UNDP) framework for capacity building which views capacity building as an ongoing process embedded in local institutions and practices. In response to local needs extra elements were included in the framework to tailor the capacity building programme according to the existing policy and budget cycles and respective competence requirements, and link it with transparent career development structures of the Ministry of Health. This aspect of the programme was informed by the institutional capability assessment model used by the United Kingdom National Health Service (NHS) which was adapted to examine the specific organizational and individual competences of the Ministry of Health in Kazakhstan. There were clear successes in building capacity for policy making and strategic planning within the Ministry of Health in Kazakhstan, including better planned, more timely and in-depth responses to policy assignments. Embedding career development as a part of this process was more challenging. This case study highlights the importance of strong political will and high level support for capacity building in ensuring the sustainability of programmes. It also shows that capacity-building programmes need to ensure full engagement with all local stakeholders, or where this is not possible, programmes need to be targeted narrowly to those stakeholders who will benefit most, for the greatest impact to be achieved. In sum, high quality tailor-made capacity development programmes should be based on thorough needs assessment of individual and organizational competences in a specific institutional setting. The experience showed that complementary approaches to human resource development worked effectively in the context of organizations and systems, where an enabling environment was present, and country ownership and political will was complemented by strong technical assistance to design and deliver high quality tailor-made capacity building initiatives.

In situ formed Si nanoparticle network with micron-sized Si particles for lithium-ion battery anodes.

PubMed

Wu, Mingyan; Sabisch, Julian E C; Song, Xiangyun; Minor, Andrew M; Battaglia, Vincent S; Liu, Gao

2013-01-01

To address the significant challenges associated with large volume change of micrometer-sized Si particles as high-capacity anode materials for lithium-ion batteries, we demonstrated a simple but effective strategy: using Si nanoparticles as a structural and conductive additive, with micrometer-sized Si as the main lithium-ion storage material. The Si nanoparticles connected into the network structure in situ during the charge process, to provide electronic connectivity and structure stability for the electrode. The resulting electrode showed a high specific capacity of 2500 mAh/g after 30 cycles with high initial Coulombic efficiency (73%) and good rate performance during electrochemical lithiation and delithiation: between 0.01 and 1 V vs Li/Li(+).

Site specific risk assessment of an energy-from-waste thermal treatment facility in Durham Region, Ontario, Canada. Part A: Human health risk assessment.

PubMed

Ollson, Christopher A; Knopper, Loren D; Whitfield Aslund, Melissa L; Jayasinghe, Ruwan

2014-01-01

The regions of Durham and York in Ontario, Canada have partnered to construct an energy-from-waste thermal treatment facility as part of a long term strategy for the management of their municipal solid waste. This paper presents the results of a comprehensive human health risk assessment for this facility. This assessment was based on extensive sampling of baseline environmental conditions (e.g., collection and analysis of air, soil, water, and biota samples) as well as detailed site specific modeling to predict facility-related emissions of 87 identified contaminants of potential concern. Emissions were estimated for both the approved initial operating design capacity of the facility (140,000 tonnes per year) and for the maximum design capacity (400,000 tonnes per year). For the 140,000 tonnes per year scenario, this assessment indicated that facility-related emissions are unlikely to cause adverse health risks to local residents, farmers, or other receptors (e.g., recreational users). For the 400,000 tonnes per year scenarios, slightly elevated risks were noted with respect to inhalation (hydrogen chloride) and infant consumption of breast milk (dioxins and furans), but only during predicted 'upset conditions' (i.e. facility start-up, shutdown, and loss of air pollution control) that represent unusual and/or transient occurrences. However, current provincial regulations require that additional environmental screening would be mandatory prior to expansion of the facility beyond the initial approved capacity (140,000 tonnes per year). Therefore, the potential risks due to upset conditions for the 400,000 tonnes per year scenario should be more closely investigated if future expansion is pursued. © 2013.

Increasing community capacity for participatory evaluation of healthy eating and active living strategies through direct observations and environmental audits.

PubMed

Kemner, Allison L; Stachecki, Jessica R; Bildner, Michele E; Brennan, Laura K

2015-01-01

Local partnerships from the Healthy Kids, Healthy Communities initiative elected to participate in enhanced evaluation trainings to collect data through environmental audits and direct observations as well as to build their evaluation capacity. Environmental audit and direct observation tools and protocols were adapted for the relevant healthy eating and active living policy and environmental change approaches being conducted by the Healthy Kids, Healthy Communities partnerships. Customized trainings were conducted by the evaluation team to increase capacity and understanding for evaluation activities. A total of 87 trainings were conducted by the evaluation team in 31 Healthy Kids, Healthy Communities community partnerships. Data were collected for a total of 41 environmental audits and 17 direct observations. Community case examples illustrate how these trainings developed evaluation capacity. For instance, youth from one community presented environmental audit findings to local elected officials. The 31 partnerships participating in the community-based evaluation efforts resulted in 164 individuals trained in collecting context-specific data to assess the impact of healthy eating and active living policy and environmental strategies designed to create community change.

Enhancing capacity among faith-based organizations to implement evidence-based cancer control programs: a community-engaged approach.

PubMed

Leyva, Bryan; Allen, Jennifer D; Ospino, Hosffman; Tom, Laura S; Negrón, Rosalyn; Buesa, Richard; Torres, Maria Idalí

2017-09-01

Evidence-based interventions (EBIs) to promote cancer control among Latinos have proliferated in recent years, though adoption and implementation of these interventions by faith-based organizations (FBOs) is limited. Capacity building may be one strategy to promote implementation. In this qualitative study, 18 community key informants were interviewed to (a) understand existing capacity for health programming among Catholic parishes, (b) characterize parishes' resource gaps and capacity-building needs implementing cancer control EBIs, and (c) elucidate strategies for delivering capacity-building assistance to parishes to facilitate implementation of EBIs. Semi-structured qualitative interviews were conducted. Key informants concurred about the capacity of Catholic parishes to deliver health programs, and described attributes of parishes that make them strong partners in health promotion initiatives, including a mission to address physical and mental health, outreach to marginalized groups, altruism among members, and existing engagement in health programming. However, resource gaps and capacity building needs were also identified. Specific recommendations participants made about how existing resources might be leveraged to address challenges include to: establish parish wellness committees; provide "hands-on" learning opportunities for parishioners to gain program planning skills; offer continuous, tailored, on-site technical assistance; facilitate relationships between parishes and community resources; and provide financial support for parishes. Leveraging parishes' existing resources and addressing their implementation needs may improve adoption of cancer control EBIs.

Sponge-like reduced graphene oxide/silicon/carbon nanotube composites for lithium ion batteries

NASA Astrophysics Data System (ADS)

Fang, Menglu; Wang, Zhao; Chen, Xiaojun; Guan, Shiyou

2018-04-01

Three-dimensional sponge-like reduced graphene oxide/silicon/carbon nanotube composites were synthesized by one-step hydrothermal self-assembly using silicon nanoparticles, graphene oxide and amino modified carbon nanotubes to develop high-performance anode materials of lithium ion batteries. Scanning electron microscopy and transmission electron microscopy images show the structure of composites that Silicon nanoparticles are coated with reduced graphene oxide while amino modified carbon nanotubes wrap around the reduced graphene oxide in the composites. When applied to lithium ion battery, these composites exhibit high initial specific capacity of 2552 mA h/g at a current density of 0.05 A/g. In addition, reduced graphene oxide/silicon/carbon nanotube composites also have better cycle stability than bare Silicon nanoparticles electrode with the specific capacity of 1215 mA h/g after 100 cycles. The three-dimension sponge-like structure not only ensures the electrical conductivity but also buffers the huge volume change, which has broad potential application in the field of battery.

Initiation of Addiction Treatment and Access to Services: Young Adults' Accounts of Their Help-Seeking Experiences.

PubMed

Wagner, Vincent; Bertrand, Karine; Flores-Aranda, Jorge; Acier, Didier; Brunelle, Natacha; Landry, Michel; Brochu, Serge

2017-09-01

Substance addiction in young adults is particularly problematic. Yet, much remain at stake in understanding the specifics of this population's access to services. The objective of this study is to explore young adults' initiation of substance misuse treatment. Our study sample was composed of 35 individuals aged 18 to 30 with problematic psychoactive substance use who have been identified in criminal courts, hospital emergency departments, and Health and Social Services Centers in Québec (Canada). A thematic analysis was performed on the 62 semi-structured interviews conducted with participants. Three components emerged. First, personal elements-expectations, individual motivations, perceptions of use, and capacity to control it-influence initiation of substance misuse treatment. Second, family and peers have noticeable influences. Finally, system characteristics and prior care experiences also shape the process. Consideration should be given to tailor interventions that can reach young adults and encourage them to initiate appropriate care.

Rethinking capacity building for knowledge mobilisation: developing multilevel capabilities in healthcare organisations.

PubMed

Kislov, Roman; Waterman, Heather; Harvey, Gill; Boaden, Ruth

2014-11-15

Knowledge mobilisation in healthcare organisations is often carried out through relatively short-term projects dependent on limited funding, which raises concerns about the long-term sustainability of implementation and improvement. It is becoming increasingly recognised that the translation of research evidence into practice has to be supported by developing the internal capacity of healthcare organisations to engage with and apply research. This process can be supported by external knowledge mobilisation initiatives represented, for instance, by professional associations, collaborative research partnerships and implementation networks. This conceptual paper uses empirical and theoretical literature on organisational learning and dynamic capabilities to enhance our understanding of intentional capacity building for knowledge mobilisation in healthcare organisations. The discussion is structured around the following three themes: (1) defining and classifying capacity building for knowledge mobilisation; (2) mechanisms of capability development in organisational context; and (3) individual, group and organisational levels of capability development. Capacity building is presented as a practice-based process of developing multiple skills, or capabilities, belonging to different knowledge domains and levels of complexity. It requires an integration of acquisitive learning, through which healthcare organisations acquire knowledge and skills from knowledge mobilisation experts, and experience-based learning, through which healthcare organisations adapt, absorb and modify their knowledge and capabilities through repeated practice. Although the starting point for capability development may be individual-, team- or organisation-centred, facilitation of the transitions between individual, group and organisational levels of learning within healthcare organisations will be needed. Any initiative designed to build capacity for knowledge mobilisation should consider the subsequent trajectory of newly developed knowledge and skills within the recipient healthcare organisations. The analysis leads to four principles underpinning a practice-based approach to developing multilevel knowledge mobilisation capabilities: (1) moving from 'building' capacity from scratch towards 'developing' capacity of healthcare organisations; (2) moving from passive involvement in formal education and training towards active, continuous participation in knowledge mobilisation practices; (3) moving from lower-order, project-specific capabilities towards higher-order, generic capabilities allowing healthcare organisations to adapt to change, absorb new knowledge and innovate; and (4) moving from single-level to multilevel capability development involving transitions between individual, group and organisational learning.

Near Term Capacity Initiatives

DOT National Transportation Integrated Search

1992-07-01

One of the major aviation challenges in recent years has been the increase in : the number and duration of flight delays. This pamphlet offers the reader a : description of near-term capacity initiatives, their intended purpose, an : indication of wh...

Treatment Effect Heterogeneity in a Science Professional Development Initiative: The Case for School Capacity

ERIC Educational Resources Information Center

Bruch, Sarah; Grigg, Jeffrey; Hanselman, Paul

2010-01-01

This study focuses on how the treatment effects of a teacher professional development initiative in science differed by school capacity. In other words, the authors are primarily concerned with treatment effect heterogeneity. As such, this paper complements ongoing evaluation of the average treatment effects of the initiative over time. The…

77 FR 34973 - Announcement of Funding Awards for HUD's Fiscal Year 2011-2012 Technical Assistance and Capacity...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-12

... Transformation Initiative (OneCPD TA and Core Curricula) AGENCY: Office of the Assistant Secretary for Community... Transformation Initiative (OneCPD TA and Core Curricula) program. This announcement contains the names of the... Capacity Building under the Transformation Initiative (OneCPD TA and Core Curricula) was designed to...

The two-dimensional to three-dimensional transition structures of ZnCo2O4 for the application of lithium-ion batteries

NASA Astrophysics Data System (ADS)

Jung, Mi-Hee

2018-01-01

We prepare the transition structure of ZnCo2O4 via transformation from two-dimensional (2D) nanosheets to three-dimensional (3D) microspheres with the solvothermal method. ZnCo2O4 nanocrystallites were produced from the reaction of zinc acetate and cobalt nitrate in the non-aqueous methanol solution. The oriented attachment of ZnCo2O4 nanocrystallites results in the formation of the 2D wrinkled-paper-like structure of ZnCo2O4. The 2D ZnCo2O4 nanosheet agglomerate spontaneously because there is no appropriate surfactant, and they have weak electrical double layers in the precursor solution. As the stacking of 2D ZnCo2O4 nanosheets increased, the aggregate of ZnCo2O4 nanosheet was transformed into the 3D ZnCo2O4 microspheres. The transition structure of the ZnCo2O4 was composed of the interconnected ZnCo2O4 nanoparticles, which results in a porous structure to accommodate the volume expansion of ZnCo2O4 structure during the charge process. The transition structure of ZnCo2O4 exhibits a remarkably high specific capacity and improved cycle performance. At a current density of 100 mA g-1, the transition structure of ZnCo2O4 exhibited excellent initial discharge specific capacity of 2094 mA h g-1. The discharge capacity maintain at 1296.91 mA h g-1 after 200 cycles. Even as current density reached to 2000 mA g-1, the average specific capacity still showed 606.88 mA hg-1.

Migration of two antibiotics during resuspension under simulated wind-wave disturbances in a water-sediment system.

PubMed

Li, Shu; Huang, Zheng; Wang, Yi; Liu, Yu-Qing; Luo, Ran; Shang, Jing-Ge; Liao, Qian-Jia-Hua

2018-02-01

In this study, the migration of antibiotics (norfloxacin, NOR; and sulfamethoxazole, SMX) under simulated resuspension conditions across the sediment-water interface were quantified for two locations in China: point A, located in Meiliang Bay of Lake Taihu, and point B, located in Dapukou of Lake Taihu. The concentrations of suspended solids (SS) in the overlying water amounted to 100, 500, and 1000 mg/L during background, moderate, and strong simulated wind-wave disturbances, respectively. At each SS level, the initial concentrations of the two antibiotics were set to 1, 5, and 10 mg/L. The results showed that both resuspended SS and the initial concentration of antibiotics could influence the migration of NOR in the water-sediment system. Specifically, both higher SS and initial antibiotic concentrations were associated with higher rates of migration and accumulation of NOR from water to sediment. In contrast, the migration of SMX in the water-sediment system was not impacted by SS or initial antibiotic concentration. The adsorption capacities of sediments for NOR and SMX were significantly different at both locations, possibly reflecting differences in cation exchange capacity (CEC) and organic material (OM) contents. In general, higher CEC and OM values were found in sediments with a higher adsorption capacity for the antibiotics. When CEC and OM values of sediments were higher, the adsorption capacity reached up to 51.73 mg/kg. Large differences in the migration from water to sediment were observed for the two antibiotics, with NOR migration rates higher than those of SMX. The accumulation of NOR in surface sediment during resuspension was about 14 times higher than that of SMX. The main reason for this is that the chemical adsorption of NOR is seldom reversible. Overall, this study demonstrates that resuspension of NOR and SMX attached to sediments under simulated wind-wave disturbances can promote the migration of the antibiotics from water to sediment; these results could be useful for assessing the migration and fate of commonly used antibiotics in water-sediment systems. Copyright © 2017 Elsevier Ltd. All rights reserved.

Adsorption of arsenic from aqueous solution using magnetic graphene oxide

NASA Astrophysics Data System (ADS)

Sherlala, A. I. A.; Raman, A. A.; Bello, M. M.

2017-06-01

A binary of graphene oxide (GO) and iron oxide (IO) was prepared and used for the removal of arsenic from aqueous solution. The synthesized compound was characterized using XRD analysis. The prepared composite was used for the adsorption of arsenic from aqueous solution. Central Composite Design was used to design the adsorption experiments and to investigate the effects of operational parameters (initial concentration of arsenic, adsorbent dosage, pH and time) on the adsorption capacity and efficiency. The adsorbent shows a high adsorption capacity for the arsenic. The adsorption efficiency ranges between 33.2 % and 99.95 %. The most significant factors affecting the adsorption capacity were found to be the initial concentration of arsenic and the adsorbent dosage. The initial pH of the solution slightly affects the adsorption capacity, with the maximum adsorption capacity occurring around pH 6 - 7. Thus, the developed adsorbent has a potential for effective removal of arsenic from aqueous solution.

Maternal health development programs: comparing priorities of bilateral and private donors.

PubMed

Deleye, Cécile; Lang, Achim

2014-11-19

The face of international aid for health and development is changing. Private donors such as foundations and corporations are playing an increasingly important role, working in international development as direct operators or in partnerships with governments. This study compares maternal health programs of new development actors to traditional governmental donors. It aims to investigate what maternal health programs large governmental donors, foundations and corporate donors are conducting, and how and why they differ. A total of 263 projects were identified and analyzed. We focus on nine categories of maternal health programs: family planning services, focus on specific diseases, focus on capacity building, use of information and communication technology (ICT), support of research initiatives, cooperation with local non-state or state partners and cooperation with non-local non-state or state partners. Data analysis was carried out using Generalized Linear Mixed-Effects Models (GLMER). Maternal health policies of public and private donors differ with regard to strategic approaches, as can be seen in their diverging positions regarding disease focus, family planning services, capacity building, and partner choice. Bilateral donors can be characterized as focusing on family planning services, specific diseases and capacity-building while disregarding research and ICT. Bilateral donors cooperate with local public authorities and with governments and NGOs from other developed countries. In contrast, corporations focus their donor activities on specific diseases, capacity-building and ICT while disregarding family planning services and research. Corporations cooperate with local and in particular with non-local non-state actors. Foundations can be characterized as focusing on family planning services and research, while disregarding specific diseases, capacity-building and ICT. Foundations cooperate less than other donors; but when they do, they cooperate in particular with non-state actors, local as well as non-local. These findings should help developing coordination mechanisms that embrace the differences and similarities of the different types of donors. As donor groups specialize in different contexts, NGOs and governments working on development and health aid may target donors groups that have specialized in certain issues.

Sequestration of carbon in soil organic matter in Senegal: an overview

USGS Publications Warehouse

Tieszen, Larry L.; Tappan, G. Gray; Toure, A.

2004-01-01

The project focuses on four objectives in specific locations across the agroecological zones of Senegal. These objectives are: use of soil sampling and biogeochemical modeling to quantify the biophysical potential for carbon sequestration and to determine the sensitivity of the carbon stocks to various management and climate scenarios, to evaluate the socio-economic and cultural requirements necessary for successful project implementation directed toward an aggregation of smallholders to sequester around 100,000 t carbon (C), to support capacity building to develop a Carbon Specialist Team, and to initiate extrapolation from site-specific project areas to the Sahel region and the national level.

Specific cooling capacity of liquid nitrogen

NASA Technical Reports Server (NTRS)

Kilgore, R. A.; Adcock, J. B.

1977-01-01

The assumed cooling process and the method used to calculate the specific cooling capacity of liquid nitrogen are described, and the simple equation fitted to the calculated specific cooling capacity data, together with the graphical form calculated values of the specific cooling capacity of nitrogen for stagnation temperatures from saturation to 350 K and stagnation pressures from 1 to 10 atmospheres, are given.

Networks to Strengthen Health Systems for Chronic Disease Prevention

PubMed Central

Riley, Barbara L.; Herbert, Carol P.; Best, Allan

2013-01-01

Interorganizational networks that harness the priorities, capacities, and skills of various agencies and individuals have emerged as useful approaches for strengthening preventive services in public health systems. We use examples from the Canadian Heart Health Initiative and Alberta’s Primary Care Networks to illustrate characteristics of networks, describe the limitations of existing frameworks for assessing the performance of prevention-oriented networks, and propose a research agenda for guiding future efforts to improve the performance of these initiatives. Prevention-specific assessment strategies that capture relevant aspects of network performance need to be identified, and feedback mechanisms are needed that make better use of these data to drive change in network activities. PMID:24028225

Musculoskeletal, biomechanical, and physiological gender differences in the US military.

PubMed

Allison, Katelyn F; Keenan, Karen A; Sell, Timothy C; Abt, John P; Nagai, Takashi; Deluzio, Jennifer; McGrail, Mark; Lephart, Scott M

2015-01-01

The repeal of the Direct Ground Combat Assignment Rule has renewed focus on examining performance capabilities of female military personnel and their ability to occupy previously restricted military occupational specialties. Previous research has revealed female Soldiers suffer a greater proportion of musculoskeletal injuries compared to males, including a significantly higher proportion of lower extremity, knee, and overuse injuries. Potential differences may also exist in musculoskeletal, biomechanical, and physiological characteristics between male and female Soldiers requiring implementation of gender-specific training in order to mitigate injury risk and enhance performance. To examine differences in musculoskeletal, biomechanical, and physiological characteristics in male and female Soldiers. A total of 406 101st Airborne Division (Air Assault) Soldiers (348 male; 58 female) participated. Subjects underwent testing for flexibility, isokinetic and isometric strength (percent body weight), single-leg balance, lower body biomechanics during a stop jump and drop landing, body composition, anaerobic power/capacity, and aerobic capacity. Independent t tests assessed between-group comparisons. Women demonstrated significantly greater flexibility (P<.01-P<.001) and better balance (P≤.001) than men. Men demonstrated significantly greater strength (P≤.001), aerobic capacity (47.5±7.6 vs 40.3±5.4 ml/kg/min, P<.001), anaerobic power (13.3±2.1 vs 9.5±1.7 W/kg, P<.001), and anaerobic capacity (7.8±1.0 vs 6.1±0.8 W/kg, P<.001) and lower body fat (20.1±7.5 vs 26.7±5.7 (%BF), P<.001). Women demonstrated significantly greater hip flexion and knee valgus at initial contact during both the stop jump and drop landing tasks and greater knee flexion at initial contact during the drop landing task (P<.05-P<.001). Gender differences exist in biomechanical, musculoskeletal, and physiological characteristics. Sex-specific interventions may aid in improving such characteristics to optimize physical readiness and decrease the injury risk during gender-neutral training, and decreasing between-sex variability in performance characteristics may result in enhanced overall unit readiness. Identification of sex-specific differences in injury patterns and characteristics should facilitate adjustments in training in order for both sexes to meet the gender-neutral occupational demands for physically demanding military occupational specialties.

One-pot synthesis of carbon-coated nanosized LiTi2(PO4)3 as anode materials for aqueous lithium ion batteries

NASA Astrophysics Data System (ADS)

Liu, Zhantao; Qin, Xusong; Xu, Hui; Chen, Guohua

2015-10-01

In this study, a one-pot sintering process incorporating sol-gel preparation route and in-situ carbon coating was proposed for the synthesis of carbon-coated nanosized LiTi2(PO4)3. Experimental results show that the prepared LiTi2(PO4)3 particles are of high crystallinity and well-coated by turbostratic carbon. Attributed to nanosized particles and enhanced conductivity provided by turbostratic carbon coating, the carbon-coated LiTi2(PO4)3 showed high rate performance and good cycling life in aqueous electrolyte. Particularly, the carbon-coated LiTi2(PO4)3 exhibited initial specific capacities of 103 and 89 mAh g-1, and retained 80.6% and 97% of the initial capacities after 120 cycles at 1C and 10C in aqueous electrolyte, respectively. The high rate performance and good cycling life of carbon-coated LiTi2(PO4)3 in aqueous electrolyte reveal its potential as negative electrode in aqueous lithium-ion batteries for electric vehicles and industrial-scale energy storage systems.

Self-Volatilization Approach to Mesoporous Carbon Nanotube/Silver Nanoparticle Hybrids: The Role of Silver in Boosting Li Ion Storage.

PubMed

Jiang, Hao; Zhang, Haoxuan; Fu, Yao; Guo, Shaojun; Hu, Yanjie; Zhang, Ling; Liu, Yu; Liu, Honglai; Li, Chunzhong

2016-01-26

One of the biggest challenging issues of carbon nanomaterials for Li ion batteries (LIBs) is that they show low initial Coulombic efficiency (CE), leading to a limited specific capacity. Herein, we demonstrate a simple template self-volatilization strategy for in situ synthesis of mesoporous carbon nanotube/Ag nanoparticle (NP) hybrids (Ag-MCNTs) to boost the LIBs' performance. The key concept of Ag-MCNTs for enhancing LIBs is that a small trace of Ag NPs on MCNTS can greatly restrict the formation of a thicker solid electrolyte interphase film, which has been well verified by both transmission electron microscopy results and quantum density functional theory calculations, leading to the highest initial CE in all the reported carbon nanomaterials. This uncovered property of Ag NPs from Ag-MCNTs makes them exhibit a very high reversible capacity of 1637 mAh g(-1) after 400 discharge/charge cycles at 100 mA g(-1), approximately 5 times higher than the theoretical value of a graphite anode (372 mAh g(-1)), excellent rate capability, and long cycle life.

Exploring unintended consequences of policy initiatives in mental health: the example of Child and Adolescent Mental Health Services (CAMHS) in England.

PubMed

Foreman, David M

2016-08-05

The impact of policy and funding on Child and Adolescent Mental Health Service (CAMHS) activity and capacity, from 2003 to 2012, was assessed. The focus was on preschool children (aged 0-4 years), as current and 2003 policy initiatives stressed the importance of 'early intervention'. National service capacity from English CAMHS mapping was obtained from 2003 to 2008 inclusive. English Hospital Episode Statistics (HES) for English CAMHS was obtained from 2003 to 2012. The Child and Adolescent Faculty of the Royal College of Psychiatrists surveyed its members about comparative 0-4-year service activity and attitudes in 2012. CAMHS services in England provided HES and CAMHS mapping data. The Child and Adolescent Faculty of the Royal College of Psychiatrists are child psychiatrists, including trainees. CAMHS mapping data provided national estimates of total numbers of CAMHS patients, whereas HES data counted appointments or episodes of inpatient care. The survey reported on Child Psychiatrists' informal estimates of service activity and attitudes towards children aged 0-4 years. The association between service capacity and service activity was moderated by an interaction between specified funding and age, the youngest children benefiting least from specified funding and suffering most when it was withdrawn (Pr=0.005). Policy review and significant differences between age-specific HES trends (Pr<0.001) suggested this reflected prioritisation of older children. Clinicians were unaware of this effect at local level, though it significantly influenced their attitudes to prioritising this group (Pr=0.02). If the new policy initiative for CAMHS is to succeed, it will need to have time-limited priorities attached to sustained, specified funding, with planning for limits as well as expansion. Data collection for policy evaluation should include measures of capacity and activity. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Three-Dimensionally Hierarchical Graphene Based Aerogel Encapsulated Sulfur as Cathode for Lithium/Sulfur Batteries

PubMed Central

Li, Haipeng; Sun, Liancheng; Wang, Zhuo; Zhang, Yongguang; Tan, Taizhe; Wang, Gongkai

2018-01-01

A simple and effective method was developed to obtain the electrode for lithium/sulfur (Li/S) batteries with high specific capacity and cycling durability via adopting an interconnected sulfur/activated carbon/graphene (reduced graphene oxide) aerogel (S/AC/GA) cathode architecture. The AC/GA composite with a well-defined interconnected conductive network was prepared by a reduction-induced self-assembly process, which allows for obtaining compact and porous structures. During this process, reduced graphene oxide (RGO) was formed, and due to the presence of oxygen-containing functional groups on its surface, it not only improves the electronic conductivity of the cathode but also effectively inhibits the polysulfides dissolution and shuttle. The introduced activated carbon allowed for lateral and vertical connection between individual graphene sheets, completing the formation of a stable three-dimensionally (3D) interconnected graphene framework. Moreover, a high specific surface area and 3D interconnected porous structure efficiently hosts a higher amount of active sulfur material, about 65 wt %. The designed S/AC/GA composite electrodes deliver an initial capacity of 1159 mAh g−1 at 0.1 C and can retain a capacity of 765 mAh g−1 after 100 cycles in potential range from 1 V to 3 V. PMID:29373525

A high-performance ternary Si composite anode material with crystal graphite core and amorphous carbon shell

NASA Astrophysics Data System (ADS)

Sui, Dong; Xie, Yuqing; Zhao, Weimin; Zhang, Hongtao; Zhou, Ying; Qin, Xiting; Ma, Yanfeng; Yang, Yong; Chen, Yongsheng

2018-04-01

Si is a promising anode material for lithium-ion batteries, but suffers from sophisticated engineering structures and complex fabrication processes that pose challenges for commercial application. Herein, a ternary Si/graphite/pyrolytic carbon (SiGC) anode material with a structure of crystal core and amorphous shell using low-cost raw materials is developed. In this ternary SiGC composite, Si component exists as nanoparticles and is spread on the surface of the core graphite flakes while the sucrose-derived pyrolytic carbon further covers the graphite/Si components as the amorphous shell. With this structure, Si together with the graphite contributes to the high specific capacity of this Si ternary material. Also the graphite serves as the supporting and conducting matrix and the amorphous shell carbon could accommodate the volume change effect of Si, reinforces the integrity of the composite architecture, and prevents the graphite and Si from direct exposing to the electrolyte. The optimized ternary SiGC composite displays high reversible specific capacity of 818 mAh g-1 at 0.1 A g-1, initial Coulombic efficiency (CE) over 80%, and excellent cycling stability at 0.5 A g-1 with 83.6% capacity retention (∼610 mAh g-1) after 300 cycles.

A Social Partnership Model to Promote Educators' Development in Mauritius through Formal and Informal Capacity-Building Initiatives

ERIC Educational Resources Information Center

Santally, Mohammad Issack; Cooshna-Naik, Dorothy; Conruyt, Noel; Wing, Caroline Koa

2015-01-01

This paper describes a social partnership model based on the living lab concept to promote the professional development of educators through formal and informal capacity-building initiatives. The aim is to have a broader impact on society through community outreach educational initiatives. A Living Lab is an environment for user-centered…

Enhancing Infant Mental Health Using a Capacity-Building Model: A Case Study of a Process Evaluation of the "Ready, Steady, Grow" Initiative

ERIC Educational Resources Information Center

O'Farrelly, Christine; Guerin, Suzanne; Victory, Gerard

2017-01-01

Infant mental health (IMH) is best promoted through a continuum of services underpinned by strong service capacity. However, service providers often lack fundamental IMH knowledge and skills. Using the Ready, Steady, Grow (RSG) initiative as a case study of a capacity-building model (P., Hawe, L., King, M., Noort, C., Jordens, & B., Llyod,…

"The magic is in the mix": lessons from research capacity building in the Canadian tobacco control community, 2000-2010.

PubMed

Riley, Barbara L; Viehbeck, Sarah M; Cohen, Joanna E; Chia, Marie C

2013-02-25

Global public health issues, including tobacco use, will be addressed most effectively if informed by relevant evidence. Additional capacity is needed to undertake and sustain relevant and rigorous research that will inform and enable learning from interventions. Despite the undisputed importance of research capacity building (RCB), there is little evidence about how to create relevant capacities. RCB for tobacco control in Canada from 2000-2010 offers a rich experience from which to learn. Lessons were derived using structured data collection from seven capacity-building initiatives and an invitational workshop, at which reflections on major contributions and lessons learned were discussed by initiative leads. Ten years of RCB for tobacco control in Canada revealed the importance of a) taking an organic approach to RCB, b) targeting and sustaining investments in a mix of RCB activities, c) vision and collaborative leadership at organizational and initiative levels, d) a focus on building community, and e) studying capacity building. The experience also provided tangible examples of RCB initiatives and how independent investments can be linked to create a coherent approach. Looking ahead, promising directions may include positioning RCB within a broader context of "field building", focusing on practical approaches to sustainability, and enhancing research on RCB.

An improved implementable process for the synthesis of zeolite 4A from bauxite tailings and its Cr3+ removal capacity

NASA Astrophysics Data System (ADS)

Lei, Peng-cheng; Shen, Xian-jiang; Li, Yang; Guo, Min; Zhang, Mei

2016-07-01

A simple and practical method for the synthesis of zeolite 4A from bauxite tailings is presented in this paper. Systematic investigations were carried out regarding the capacity of zeolite 4A to remove Cr(III) from aqueous solutions with relatively low initial concentrations of Cr(III) (5-100 mg·L-1). It is found that the new method is extremely cost-effective and can significantly contribute in decreasing environmental pollution caused by the dumping of bauxite tailings. The Cr(III) removal capacity highly depends on the initial pH value and concentration of Cr(III) in the solution. The maximum removal capacity of Cr(III) was evaluated to be 85.1 mg·g-1 for zeolite 4A, measured at an initial pH value of 4 and an initial Cr(III) concentration of 5 mg·L-1. This approach enables a higher removal capacity at lower concentrations of Cr(III), which is a clear advantage over the chemical precipitation method. The removal mechanism of Cr(III) by zeolite 4A was examined. The results suggest that both ion exchange and the surface adsorption-crystallization reaction are critical steps. These two steps collectively resulted in the high removal capacity of zeolite 4A to remove Cr(III).

Biologically derived melanin electrodes in aqueous sodium-ion energy storage devices

PubMed Central

Kim, Young Jo; Wu, Wei; Chun, Sang-Eun; Whitacre, Jay F.; Bettinger, Christopher J.

2013-01-01

Biodegradable electronics represents an attractive and emerging paradigm in medical devices by harnessing simultaneous advantages afforded by electronically active systems and obviating issues with chronic implants. Integrating practical energy sources that are compatible with the envisioned operation of transient devices is an unmet challenge for biodegradable electronics. Although high-performance energy storage systems offer a feasible solution, toxic materials and electrolytes present regulatory hurdles for use in temporary medical devices. Aqueous sodium-ion charge storage devices combined with biocompatible electrodes are ideal components to power next-generation biodegradable electronics. Here, we report the use of biologically derived organic electrodes composed of melanin pigments for use in energy storage devices. Melanins of natural (derived from Sepia officinalis) and synthetic origin are evaluated as anode materials in aqueous sodium-ion storage devices. Na+-loaded melanin anodes exhibit specific capacities of 30.4 ± 1.6 mAhg−1. Full cells composed of natural melanin anodes and λ-MnO2 cathodes exhibit an initial potential of 1.03 ± 0.06 V with a maximum specific capacity of 16.1 ± 0.8 mAhg−1. Natural melanin anodes exhibit higher specific capacities compared with synthetic melanins due to a combination of beneficial chemical, electrical, and physical properties exhibited by the former. Taken together, these results suggest that melanin pigments may serve as a naturally occurring biologically derived charge storage material to power certain types of medical devices. PMID:24324163

Informed Consent Decision-Making in Deep Brain Stimulation.

PubMed

Mandarelli, Gabriele; Moretti, Germana; Pasquini, Massimo; Nicolò, Giuseppe; Ferracuti, Stefano

2018-05-11

Deep brain stimulation (DBS) has proved useful for several movement disorders (Parkinson’s disease, essential tremor, dystonia), in which first and/or second line pharmacological treatments were inefficacious. Initial evidence of DBS efficacy exists for refractory obsessive-compulsive disorder, treatment-resistant major depressive disorder, and impulse control disorders. Ethical concerns have been raised about the use of an invasive surgical approach involving the central nervous system in patients with possible impairment in cognitive functioning and decision-making capacity. Most of the disorders in which DBS has been used might present with alterations in memory, attention, and executive functioning, which may have an impact on the mental capacity to give informed consent to neurosurgery. Depression, anxiety, and compulsivity are also common in DBS candidate disorders, and could also be associated with an impaired capacity to consent to treatment or clinical research. Despite these issues, there is limited empirical knowledge on the decision-making levels of these patients. The possible informed consent issues of DBS will be discussed by focusing on the specific treatable diseases.

One-Dimensional Cu2- xSe Nanorods as the Cathode Material for High-Performance Aluminum-Ion Battery.

PubMed

Jiang, Jiali; Li, He; Fu, Tao; Hwang, Bing-Joe; Li, Xue; Zhao, Jinbao

2018-05-30

In this work, nonstoichiometric Cu 2- x Se fabricated by a facile water evaporation process is used as high-performance Al-ion battery cathode materials. Cu 2- x Se electrodes show high reversible capacity and excellent cycling stability, even at a high current density of 200 mA g -1 , the specific charge capacity in the initial cycle is 241 mA h g -1 and maintains 100 mA h g -1 after 100 cycles with a Coulombic efficiency of 96.1%, showing good capacity retention. The prominent kinetics of Cu 2- x Se electrodes is also revealed by the GITT, which is attributed to the ultrahigh electronic conductivity of the Cu 2- x Se material. Most importantly, an extensive research is dedicated to investigating the detailed intercalation and de-intercalation of relatively large chloroaluminate anions into the cubic Cu 2- x Se, which is conducive to better understand the reaction mechanism of the Al/Cu 2- x Se battery.

Porous carbon derived from Sunflower as a host matrix for ultra-stable lithium-selenium battery.

PubMed

Jia, Min; Niu, Yubin; Mao, Cuiping; Liu, Sangui; Zhang, Yan; Bao, Shu-Juan; Xu, Maowen

2017-03-15

A novel porous carbon material using the spongy tissue of sunflower as raw material is reported for the first time. The obtained porous carbon has an extremely high surface area of 2493.0m 2 g -1 , which is beneficial to focus on encapsulating selenium in it and have an inhibiting effect about diffusion of polyselenides over the charge/discharge processes used as the host matrix for Li-Se battery. The porous carbon/Se composite electrode with 63wt% selenium delivers a high specific capacitance of 319mAhg -1 of the initial capacity, and maintains 290mAhg -1 , representing an extremely high capacity retention of 90.9% after 840 cycles with the rate of 1C. Copyright © 2016. Published by Elsevier Inc.

Climate information for public health: the role of the IRI climate data library in an integrated knowledge system.

PubMed

del Corral, John; Blumenthal, M Benno; Mantilla, Gilma; Ceccato, Pietro; Connor, Stephen J; Thomson, Madeleine C

2012-09-01

Public health professionals are increasingly concerned about the potential impact of climate variability and change on health outcomes. Protecting public health from the vagaries of climate requires new working relationships between the public health sector and the providers of climate data and information. The Climate Information for Public Health Action initiative at the International Research Institute for Climate and Society (IRI) is designed to increase the public health community's capacity to understand, use and demand appropriate climate data and climate information to mitigate the public health impacts of the climate. Significant challenges to building the capacity of health professionals to use climate information in research and decision-making include the difficulties experienced by many in accessing relevant and timely quality controlled data and information in formats that can be readily incorporated into specific analysis with other data sources. We present here the capacities of the IRI climate data library and show how we have used it to build an integrated knowledge system in the support of the use of climate and environmental information in climate-sensitive decision-making with respect to health. Initiated as an aid facilitating exploratory data analysis for climate scientists, the IRI climate data library has emerged as a powerful tool for interdisciplinary researchers focused on topics related to climate impacts on society, including health.

Toward Theoretically Cycling-Stable Lithium-Sulfur Battery Using a Foldable and Compositionally Heterogeneous Cathode.

PubMed

Zhong, Lei; Yang, Kai; Guan, Ruiteng; Wang, Liangbin; Wang, Shuanjin; Han, Dongmei; Xiao, Min; Meng, Yuezhong

2017-12-20

Rechargeable lithium-sulfur (Li-S) batteries have been expected for new-generation electrical energy storages, which are attributed to their high theoretical energy density, cost effectiveness, and eco-friendliness. But Li-S batteries still have some problems for practical application, such as low sulfur utilization and dissatisfactory capacity retention. Herein, we designed and fabricated a foldable and compositionally heterogeneous three-dimensional sulfur cathode with integrated sandwich structure. The electrical conductivity of the cathode is facilitated by three different dimension carbons, in which short-distance and long-distance pathways for electrons are provided by zero-dimensional ketjen black (KB), one-dimensional activated carbon fiber (ACF) and two-dimensional graphene (G). The resultant three-dimensional sulfur cathode (T-AKG/KB@S) with an areal sulfur loading of 2 mg cm -2 exhibits a high initial specific capacity, superior rate performance and a reversible discharge capacity of up to 726 mAh g -1 at 3.6 mA cm -2 with an inappreciable capacity fading rate of 0.0044% per cycle after 500 cycles. Moreover, the cathode with a high areal sulfur loading of 8 mg cm -2 also delivers a reversible discharge capacity of 938 mAh g -1 at 0.71 mA cm -2 with a capacity fading rate of 0.15% per cycle and a Coulombic efficiency of almost 100% after 50 cycles.

The Application of Modeling and Simulation in Capacity Management within the ITIL Framework

NASA Technical Reports Server (NTRS)

Rahmani, Sonya; vonderHoff, Otto

2010-01-01

Tightly integrating modeling and simulation techniques into Information Technology Infrastructure Library (ITIL) practices can be one of the driving factors behind a successful and cost-effective capacity management effort for any Information Technology (IT) system. ITIL is a best practices framework for managing IT infrastructure, development and operations. Translating ITIL theory into operational reality can be a challenge. This paper aims to highlight how to best integrate modeling and simulation into an ITIL implementation. For cases where the project team initially has difficulty gaining consensus on investing in modeling and simulation resources, a clear definition for M&S implementation into the ITIL framework, specifically its role in supporting Capacity Management, is critical to gaining the support required to garner these resources. This implementation should also help to clearly define M&S support to the overall system mission. This paper will describe the development of an integrated modeling approach and how best to tie M&S to definitive goals for evaluating system capacity and performance requirements. Specifically the paper will discuss best practices for implementing modeling and simulation into ITIL. These practices hinge on implementing integrated M&S methods that 1) encompass at least two or more predictive modeling techniques, 2) complement each one's respective strengths and weaknesses to support the validation of predicted results, and 3) are tied to the system's performance and workload monitoring efforts. How to structure two forms of modeling: statistical and simUlation in the development of "As Is" and "To Be" efforts will be used to exemplify the integrated M&S methods. The paper will show how these methods can better support the project's overall capacity management efforts.

Ti n O2n-1-Coated Li4Ti5O12 Composite Anode Material for Lithium-Ion Batteries

NASA Astrophysics Data System (ADS)

Zhang, Xiaoyan; Xu, Wen; Liu, Wanying; Li, Xing; Zhong, Xiaoxi; Lin, Yuanhua

2018-01-01

In an effort to enhance the rate capability of Li4Ti5O12, the Ti n O2n-1-coated Li4Ti5O12 (Li4Ti5O12-Ti n O2n-1, 3 < n < 10) composite has been synthesized through a sol-gel process followed by heat treatment in H2 atmosphere. Compared with pure Li4Ti5O12, Li4Ti5O12-Ti n O2n-1 composite shows higher specific capacity, better rate capability and cycle stability. The initial discharge capacity of the Li4Ti5O12-Ti n O2n-1 composite electrode is 171.2 mAh g-1 at 0.2°C, and 103.8 mAh g-1 at 20°C. Moreover, the discharge capacity remains 79.5 mAh g-1 after 100 cycles at 20°C with a capacity loss of 23.4%. The improved rate capacity and cycling stability clarify the positive effects of Ti n O2n-1 coating layer in Li4Ti5O12-Ti n O2n-1 composite as an anode material for lithium ion batteries.

Temporal Processing Capacity in High-Level Visual Cortex Is Domain Specific.

PubMed

Stigliani, Anthony; Weiner, Kevin S; Grill-Spector, Kalanit

2015-09-09

Prevailing hierarchical models propose that temporal processing capacity--the amount of information that a brain region processes in a unit time--decreases at higher stages in the ventral stream regardless of domain. However, it is unknown if temporal processing capacities are domain general or domain specific in human high-level visual cortex. Using a novel fMRI paradigm, we measured temporal capacities of functional regions in high-level visual cortex. Contrary to hierarchical models, our data reveal domain-specific processing capacities as follows: (1) regions processing information from different domains have differential temporal capacities within each stage of the visual hierarchy and (2) domain-specific regions display the same temporal capacity regardless of their position in the processing hierarchy. In general, character-selective regions have the lowest capacity, face- and place-selective regions have an intermediate capacity, and body-selective regions have the highest capacity. Notably, domain-specific temporal processing capacities are not apparent in V1 and have perceptual implications. Behavioral testing revealed that the encoding capacity of body images is higher than that of characters, faces, and places, and there is a correspondence between peak encoding rates and cortical capacities for characters and bodies. The present evidence supports a model in which the natural statistics of temporal information in the visual world may affect domain-specific temporal processing and encoding capacities. These findings suggest that the functional organization of high-level visual cortex may be constrained by temporal characteristics of stimuli in the natural world, and this temporal capacity is a characteristic of domain-specific networks in high-level visual cortex. Significance statement: Visual stimuli bombard us at different rates every day. For example, words and scenes are typically stationary and vary at slow rates. In contrast, bodies are dynamic and typically change at faster rates. Using a novel fMRI paradigm, we measured temporal processing capacities of functional regions in human high-level visual cortex. Contrary to prevailing theories, we find that different regions have different processing capacities, which have behavioral implications. In general, character-selective regions have the lowest capacity, face- and place-selective regions have an intermediate capacity, and body-selective regions have the highest capacity. These results suggest that temporal processing capacity is a characteristic of domain-specific networks in high-level visual cortex and contributes to the segregation of cortical regions. Copyright © 2015 the authors 0270-6474/15/3512412-13$15.00/0.

Promoting public health through state cancer control plans: a review of capacity and sustainability.

PubMed

Ory, Marcia G; Sanner, Brigid; Vollmer Dahlke, Deborah; Melvin, Cathy L

2015-01-01

The Centers for Disease Prevention and Control's National Comprehensive Cancer Control (CCC) Program oversee CCC programs designed to develop and implement CCC plans via CCC coalitions, alliances, or consortia of program stakeholders. We reviewed 40 up-to-date plans for states and the District of Columbia in order to assess how capacity building and sustainability, two evidence-based practices necessary for organizational readiness, positive growth, and maintenance are addressed. We employed an electronic key word search, supplemented by full text reviews of each plan to complete a content analysis of the CCC plans. Capacity is explicitly addressed in just over half of the plans (53%), generally from a conceptual point of view, with few specifics as to how capacity will be developed or enhanced. Roles and responsibilities, timelines for action, and measurements for evaluation of capacity building are infrequently mentioned. Almost all (92%) of the 40 up-to-date plans address sustainability on at least a cursory level, through efforts aimed at funding or seeking funding, policy initiatives, and/or partnership development. However, few details as to how these strategies will be implemented are found in the plans. We present the Texas plan as a case study offering detailed insight into how one plan incorporated capacity building and sustainability into its development and implementation. Training, technical assistance, templates, and tools may help CCC coalition members address capacity and sustainability in future planning efforts and assure the inclusion of capacity building and sustainability approaches in CCC plans at the state, tribal, territorial, and jurisdiction levels.

Research capacity building integrated into PHIT projects: leveraging research and research funding to build national capacity.

PubMed

Hedt-Gauthier, Bethany L; Chilengi, Roma; Jackson, Elizabeth; Michel, Cathy; Napua, Manuel; Odhiambo, Jackline; Bawah, Ayaga

2017-12-21

Inadequate research capacity impedes the development of evidence-based health programming in sub-Saharan Africa. However, funding for research capacity building (RCB) is often insufficient and restricted, limiting institutions' ability to address current RCB needs. The Doris Duke Charitable Foundation's African Health Initiative (AHI) funded Population Health Implementation and Training (PHIT) partnership projects in five African countries (Ghana, Mozambique, Rwanda, Tanzania and Zambia) to implement health systems strengthening initiatives inclusive of RCB. Using Cooke's framework for RCB, RCB activity leaders from each country reported on RCB priorities, activities, program metrics, ongoing challenges and solutions. These were synthesized by the authorship team, identifying common challenges and lessons learned. For most countries, each of the RCB domains from Cooke's framework was a high priority. In about half of the countries, domain specific activities happened prior to PHIT. During PHIT, specific RCB activities varied across countries. However, all five countries used AHI funding to improve research administrative support and infrastructure, implement research trainings and support mentorship activities and research dissemination. While outcomes data were not systematically collected, countries reported holding 54 research trainings, forming 56 mentor-mentee relationships, training 201 individuals and awarding 22 PhD and Masters-level scholarships. Over the 5 years, 116 manuscripts were developed. Of the 59 manuscripts published in peer-reviewed journals, 29 had national first authors and 18 had national senior authors. Trainees participated in 99 conferences and projects held 37 forums with policy makers to facilitate research translation into policy. All five PHIT projects strongly reported an increase in RCB activities and commended the Doris Duke Charitable Foundation for prioritizing RCB, funding RCB at adequate levels and time frames and for allowing flexibility in funding so that each project could implement activities according to their trainees' needs. As a result, many common challenges for RCB, such as adequate resources and local and international institutional support, were not identified as major challenges for these projects. Overall recommendations are for funders to provide adequate and flexible funding for RCB activities and for institutions to offer a spectrum of RCB activities to enable continued growth, provide adequate mentorship for trainees and systematically monitor RCB activities.

Enhanced electrochemical performance from 3DG/LiFePO4/G sandwich cathode material

NASA Astrophysics Data System (ADS)

Du, Yahui; Tang, Yufeng; Chang, Chengkang

2017-08-01

In this paper, we have successfully synthesized a three dimensional graphene/LiFePO4/graphene (3DG/LFP/G) sandwich composite by an in-situ hydrothermal method, in which chemical vapor deposited 3D graphene acts as the high conductivity supporting framework, while the LiFePO4 nanoparticles are anchored onto the 3D graphene framework covered by graphene sheets. XRD and SEM results confirmed the formation of the 3DG/LFP/G sandwich composite. Cyclic Voltammetry curve of the sandwich composite shows sharper redox peaks and reduced voltage separation when compared to the reference electrodes, suggesting high specific capacity and good rate performance. Further charge/discharge measurements presented high capacity of 164 mAh g-1 at 0.2 C and 124 mAh g-1 at 10 C (75.7% of its initial capacity) for the sandwich composite, with capacity retention of 95.7% after 100 cycles, implying potential application in lithium ion battery at high rates. The EIS investigation suggests that both the electronic conductivity and the Li ion diffusion are promoted by the underlined 3D graphene framework, which is regarded as the reason for the enhanced electrochemical performance.

Callitriche cophocarpa biomass as a potential low-cost biosorbent for trivalent chromium.

PubMed

Kyzioł-Komosińska, Joanna; Augustynowicz, Joanna; Lasek, Wojciech; Czupioł, Justyna; Ociński, Daniel

2018-05-15

The present study focused on the use of the dry mass of the macrophyte Callitriche cophocarpa as an effective biosorbent for chromium removal from concentrated solutions, typical for industrial effluents. In order to evaluate the usability of C. cophocarpa as the Cr(III) sorbent, its detailed physicochemical characterization has been performed as well as the preliminary adsorption studies. The biosorbent was characterized by specific surface area (SSA), porosity, total organic carbon (TOC), inorganic content as well as the cation exchange capacity (CEC), dominant exchangeable cations and anion exchange capacity (AEC), point of zero charge (pH pzc ) and buffering capacity. The effect of the initial chromium concentration, solution pH and co-existing anions on the sorption effectiveness have been investigated. Based on theoretical isotherm models, the maximum adsorption capacity of the dry C. cophocarpa has been determined as 77.1 mg Cr(III)/g. Finally, the strength of Cr-binding onto the plant biomass has been evaluated using the BCR extraction method, stating that chromium was strongly and - under environmental conditions - irreversibly bound to the plant biomass. Copyright © 2018 Elsevier Ltd. All rights reserved.

Reversible multi-electron redox chemistry of π-conjugated N-containing heteroaromatic molecule-based organic cathodes

NASA Astrophysics Data System (ADS)

Peng, Chengxin; Ning, Guo-Hong; Su, Jie; Zhong, Guiming; Tang, Wei; Tian, Bingbing; Su, Chenliang; Yu, Dingyi; Zu, Lianhai; Yang, Jinhu; Ng, Man-Fai; Hu, Yong-Sheng; Yang, Yong; Armand, Michel; Loh, Kian Ping

2017-07-01

Even though organic molecules with well-designed functional groups can be programmed to have high electron density per unit mass, their poor electrical conductivity and low cycle stability limit their applications in batteries. Here we report a facile synthesis of π-conjugated quinoxaline-based heteroaromatic molecules (3Q) by condensation of cyclic carbonyl molecules with o-phenylenediamine. 3Q features a number of electron-deficient pyrazine sites, where multiple redox reactions take place. When hybridized with graphene and coupled with an ether-based electrolyte, an organic cathode based on 3Q molecules displays a discharge capacity of 395 mAh g-1 at 400 mA g-1 (1C) in the voltage range of 1.2-3.9 V and a nearly 70% capacity retention after 10,000 cycles at 8 A g-1. It also exhibits a capacity of 222 mAh g-1 at 20C, which corresponds to 60% of the initial specific capacity. Our results offer evidence that heteroaromatic molecules with multiple redox sites are promising in developing high-energy-density, long-cycle-life organic rechargeable batteries.

MoTe2, A novel anode material for sodium ion battery

NASA Astrophysics Data System (ADS)

Panda, Manas Ranjan; Anish Raj, K.; Bao, Qiaoliang; Mitra, Sagar

2018-04-01

2D layered transition metal dichalcogenides are considered as a potential anode for sodium-ion batteries due to their high specific capacity, structural stability and its well-developed two-dimensional layers. 2D layered structure Molybdenum ditelluride (MoTe2) provides a superior Na-ion storage properties in sodium ion battery due to its comparative more interlayer spacing (0.699 nm). In the current study MoTe2 polycrystalline powder sample has been prepared by solid state reaction process, the structural and morphological studies have been carried out by XRD, FE-SEM and EDS etc. XRD study revealsthe well crystalline structure of the material having hexagonal structure. FE-SEM and EDS studies depict the uniformflakes like structure of the material. When it is tested as sodium-ion battery anode by applying a potential window 0.1-2.5 V, the material demonstrates a high capacity and high power performances. The as prepared MoTe2 shows an initial discharge capacity of 376 mA h g-1 and a corresponding discharge capacity of 303 mA h g-1 after the 50th cycle at a current density of 500 mA g-1.

Effect of denervation and reinnervation on oxidation of 6-(C-14) glucose by rat skeletal muscle homogenates

NASA Technical Reports Server (NTRS)

Dubois, D. C.; Max, S. R.

1983-01-01

The effects of denervation and reinnervation of the rat extensor digitorum longus muscle on the oxidation of 6-(C-14) glucose to (C-14)O2 is investigated. Results show that the rate of (C-14)O2 production decreased dramatically following denervation and the decrease became significant 20 days after nerve section. The changes which occurred prior to day 20 apparently reflected the decline of muscle mass. The decreased (C-14)O2 production was found to be due to reduced capacity of the enzymatic system, while there was no change in the apparent affinity for glucose. Results of mixing experiments showed that the loss of oxidative capacity following denervation is not caused by the production of soluble inhibitors by degenerating muscle. Measurements of the (C-14)O2 revealed that oxidative metabolism recovered during reinnervation. The specific activity in reinnervated muscles displayed an 'overshoot' of approximately 50 percent, which returned to control levels by day 60. The time-course of the denervation-mediated change indicates that altered oxidative capacity is secondary to events that initiate dennervation changes in muscle, although diminished oxidative capacity may be of considerable metabolic significance in denervated muscle.

Building organizational capacity for evidence use: the experience of two Canadian healthcare organizations.

PubMed

Humphries, Serena; Hampe, Tanis; Larsen, Derrick; Bowen, Sarah

2013-01-01

The use of evidence to inform decisions at the program level within healthcare organizations is a priority. The purpose of this article is to provide an overview of an innovative collaboration between two Canadian healthcare organizations to build organizational capacity for evidence use in program planning, implementation, and evaluation. The lessons learned from the initiative suggest that other healthcare organizations would find the capacity-building strategies identified and developed through the initiative useful.

Evaluating Training Programs for Primary Care Providers in Child/Adolescent Mental Health in Canada: A Systematic Review.

PubMed

Gotovac, Sandra; Espinet, Stacey; Naqvi, Reza; Lingard, Lorelei; Steele, Margaret

2018-04-01

The need for child/adolescent mental health care in Canada is growing. Primary care can play a key role in filling this gap, yet most providers feel they do not have adequate training. This paper reviews the Canadian literature on capacity building programs in child and adolescent psychiatry for primary care providers, to examine how these programs are being implemented and evaluated to contribute to evidence-based initiatives. A systematic literature review of peer-reviewed published articles of capacity building initiatives in child/adolescent mental health care for primary care practitioners that have been implemented in Canada. Sixteen articles were identified that met inclusion criteria. Analysis revealed that capacity building initiatives in Canada are varied but rigorous evaluation methodology is lacking. Primary care providers welcome efforts to increase mental health care capacity and were satisfied with the implementation of most programs. Objective conclusions regarding the effectiveness of these programs to increase mental health care capacity is challenging given the evaluation methodology of these studies. Rigorous evaluation methods are needed to make evidence-based decisions on ways forward to be able to build child/adolescent mental health care capacity in primary care. Outcome measures need to move beyond self-report to more objective measures, and should expand the measurement of patient outcomes to ensure that these initiative are indeed leading to improved care for families.

"It takes more than a fellowship program": reflections on capacity strengthening for health systems research in sub-Saharan Africa.

PubMed

Izugbara, Chimaraoke O; Kabiru, Caroline W; Amendah, Djesika; Dimbuene, Zacharie Tsala; Donfouet, Hermann Pythagore Pierre; Atake, Esso-Hanam; Ingabire, Marie-Gloriose; Maluka, Stephen; Mumah, Joyce N; Mwau, Matilu; Ndinya, Mollyne; Ngure, Kenneth; Sidze, Estelle M; Sossa, Charles; Soura, Abdramane; Ezeh, Alex C

2017-12-04

Sub-Saharan Africa (SSA) experiences an acute dearth of well-trained and skilled researchers. This dearth constrains the region's capacity to identify and address the root causes of its poor social, health, development, and other outcomes. Building sustainable research capacity in SSA requires, among other things, locally led and run initiatives that draw on existing regional capacities as well as mutually beneficial global collaborations. This paper describes a regional research capacity strengthening initiative-the African Doctoral Dissertation Research Fellowship (ADDRF) program. This Africa-based and African-led initiative has emerged as a practical and tested platform for producing and nurturing research leaders, strengthening university-wide systems for quality research training and productivity, and building a critical mass of highly-trained African scholars and researchers. The program deploys different interventions to ensure the success of fellows. These interventions include research methods and scientific writing workshops, research and reentry support grants, post-doctoral research support and placements, as well as grants for networking and scholarly conferences attendance. Across the region, ADDRF graduates are emerging as research leaders, showing signs of becoming the next generation of world-class researchers, and supporting the transformations of their home-institutions. While the contributions of the ADDRF program to research capacity strengthening in the region are significant, the sustainability of the initiative and other research and training fellowship programs on the continent requires significant investments from local sources and, especially, governments and the private sector in Africa. The ADDRF experience demonstrates that research capacity building in Africa is possible through innovative, multifaceted interventions that support graduate students to develop different critical capacities and transferable skills and build, expand, and maintain networks that can sustain them as scholars and researchers.

Biological variability of transferrin saturation and unsaturated iron binding capacity

PubMed Central

Adams, PC; Reboussin, DM; Press, RD; Barton, JC; Acton, RT; Moses, GC; Leiendecker-Foster, C; McLaren, GD; Dawkins, FW; Gordeuk, VR; Lovato, L; Eckfeldt, JH

2007-01-01

Background Transferrin saturation is widely considered the preferred screening test for hemochromatosis. Unsaturated iron binding capacity has similar performance at lower cost. However, the within-person biological variability of both these tests may limit their ability at commonly used cut points to detect HFE C282Y homozygous patients. Methods The Hemochromatosis and Iron Overload Screening (HEIRS) Study screened 101,168 primary care participants for iron overload using tansferrin saturation, unsaturated iron binding capacity, ferritin and HFE C282Y and H63D genotyping. Transferrin saturation and unsaturated iron binding capacity were performed at initial screening and again when selected participants and controls returned for a clinical examination several months later. A missed case was defined as a C282Y homozygote who had transferrin saturation below cut point (45 % women, 50 % men) or unsaturated iron binding capacity above cut point (150 μmol/L women, 125 μmol/L men) at either the initial screening or clinical examination, or both, regardless of serum ferritin. Results There were 209 C282Y previously undiagnosed homozygotes with transferrin saturation and unsaturated iron binding capacity testing done at initial screening and clinical examination. Sixty-eight C282Y homozygotes (33%) would have been missed at these transferrin saturation cut points (19 men, 49 women, median SF 170 μg/L, first and third quartiles 50 and 474 μg/L), and 58 homozygotes (28 %) would have been missed at the unsaturated iron binding capacity cut points (20 men, 38 women, median SF 168 μg/L, quartiles 38 and 454 μg/L). There was no advantage to using fasting samples. Conclusions The within-person biological variability of transferrin saturation and unsaturated iron binding capacity limit their usefulness as an initial screening test for expressing C282Y homozygotes. PMID:17976429

78 FR 23768 - Disease, Disability, and Injury Prevention and Control Special Emphasis Panel (SEP): Initial Review

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-22

... announced below concerns Developing Research Capacity to Assess Health Effects Associated with Volcanic Emissions and other Environmental Exposures, Funding Opportunity Announcement (FOA) EH13- 002, Initial... applications received in response to ``Developing Research Capacity to Assess Health Effects Associated with...

Young Adult Capacity Initiative Cross-Site Analysis

ERIC Educational Resources Information Center

Academy for Educational Development, 2012

2012-01-01

This cross-site analysis presents findings about the implementation, impact, and outcomes of the Young Adult Capacity Initiative (YACI), at 13 community-based organizations in New York City. These agencies received technical assistance and small incentive grants from the Fund for the City of New York Youth Development Institute (YDI) to build…

Does attention capacity moderate the effect of driver distraction in older drivers?

PubMed

Cuenen, Ariane; Jongen, Ellen M M; Brijs, Tom; Brijs, Kris; Lutin, Mark; Van Vlierden, Karin; Wets, Geert

2015-04-01

With age, a decline in attention capacity may occur and this may impact driving performance especially while distracted. Although the effect of distraction on driving performance of older drivers has been investigated, the moderating effect of attention capacity on driving performance during distraction has not been investigated yet. Therefore, the aim was to investigate whether attention capacity has a moderating effect on older drivers' driving performance during visual distraction (experiment 1) and cognitive distraction (experiment 2). In a fixed-based driving simulator, older drivers completed a driving task without and with visual distraction (experiment 1, N=17, mean age 78 years) or cognitive distraction (experiment 2, N=35, mean age 76 years). Several specific driving measures of varying complexity (i.e., speed, lane keeping, following distance, braking behavior, and crashes) were investigated. In addition to these objective driving measures, subjective measures of workload and driving performance were also included. In experiment 1, crash occurrence increased with visual distraction and was negatively related to attention capacity. In experiment 2, complete stops at stop signs decreased, initiation of braking at pedestrian crossings was later, and crash occurrence increased with cognitive distraction. Interestingly, for a measure of lane keeping (i.e., standard deviation of lateral lane position (SDLP)), effects of both types of distraction were moderated by attention capacity. Despite the decrease of driving performance with distraction, participants estimated their driving performance during distraction as good. These results imply that attention capacity is important for driving. Driver assessment and training programs might therefore focus on attention capacity. Nonetheless, it is crucial to eliminate driver distraction as much as possible given the deterioration of performance on several driving measures in those with low and high attention capacity. Copyright © 2015 Elsevier Ltd. All rights reserved.

Sustainability of NGO capacity building in southern Africa: successes and opportunities.

PubMed

Humphries, Debbie; Gomez, Ligia; Hartwig, Kari

2011-01-01

Despite an increase in organizational capacity building efforts by external organizations in low and middle income countries, the documentation of these efforts and their effects on health programs and systems remains limited. This paper reviews key frameworks for considering sustainability of capacity building and applies these frameworks to an evaluation of the sustainability of an AIDS non-governmental organization (NGO) capacity building initiative. From 2004-2007 Bristol-Myers Squibb Foundation's Secure the Future(TM) initiative in southern Africa funded a five country program, the NGO Training Institute (NGOTI), to build capacity of NGOs working to address HIV/AIDS. Lessons learned from this project include issues of ownership, the importance of integrating planning for sustainability within capacity-building projects, and the value of identifying primary capacity-building objectives in order to select sustainability strategies that are focused on maintaining program benefits. Sustainability for capacity building projects can be developed by discussing key issues early in the planning process with all primary stakeholders. Copyright © 2010 John Wiley & Sons, Ltd.

The Conversion of Social Capital into Community Development: an intervention in Australia's outback.

PubMed

Onyx, Jenny; Leonard, Rosemary

2010-01-01

The research presented in this article employed a deliberate intervention to mobilize social capital and then studied the dynamics of the way in which it influenced community development. Whether or not social capital is able to facilitate development depends on the specific context in which it occurs. Although the general context of this study was that of small rural towns in Australia's outback that are experiencing decline, each of the four towns studied had unique features which could influence the mobilization of social capital. Rural communities have the willingness and capacity to mobilize but whether this capacity is actualized may well depend on the presence of other mobilizing factors. Specifically the intervention study found that a structure needs to be in place which can take the initiative and work across the community - engaging a range of organizations. Second, the structure needs to be supported, but not controlled, by local government. Third, it needs the kind of social entrepreneurship that can sustain a community-wide vision and bring together the diverse groups within the community.

L-lactic acid and sodium p-toluenesulfonate co-doped polypyrrole for high performance cathode in sodium ion battery

NASA Astrophysics Data System (ADS)

Liao, Qishu; Hou, Hongying; Liu, Xianxi; Yao, Yuan; Dai, Zhipeng; Yu, Chengyi; Li, Dongdong

2018-04-01

In this work, polypyrrole (PPy) was co-doped with L-lactic acid (LA) and sodium p-toluenesulfonate (TsONa) for high performance cathode in sodium ion battery (SIB) via facile one-step electropolymerization on Fe foil. The as-synthesized LA/TsONa co-doped PPy cathode was investigated in terms of scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), galvanostatic charge/discharge and cyclic voltammetry (CV). The results suggested that some oval-bud-like LA/TsONa co-doped PPy particles did form and tightly combine with the surface of Fe foil; furthermore, LA/TsONa co-doped PPy cathode also delivered higher electrochemical performances than TsONa mono-doped PPy cathode. For example, the initial specific discharge capacity was as high as about 124 mAh/g, and the reversible specific capacity still maintained at about 110 mAh/g even after 50 cycles, higher than those of TsONa mono-doped PPy cathode. The synergy effect of multi components of LA/TsONa co-doped PPy cathode should be responsible for high electrochemical performances.

Reutilization of the expired tetracycline for lithium ion battery anode.

PubMed

Hou, Hongying; Dai, Zhipeng; Liu, Xianxi; Yao, Yuan; Liao, Qishu; Yu, Chengyi; Li, Dongdong

2018-07-15

Waste antibiotics into the natural environment are the large challenges to the environmental protection and the human health, and the unreasonable disposal of the expired antibiotics is a major pollution source. Herein, to achieve the innocent treatment and the resource recovery, the expired tetracycline was tried to be reutilized as the electrode active material in lithium ion battery (LIB) for the first time. The micro-structure and element component of the expired tetracycline were characterized by scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). Furthermore, the corresponding electrochemical performances were also investigated by galvanostatic charge/discharge and cyclic voltammetry (CV). To be satisfactory, the expired-tetracycline-based electrode delivered the initial specific discharge capacity of 371.6mAh/g and the reversible specific capacity of 304.1mAh/g after 200cycles. The decent results will not only offer an effective strategy to recycle the expired tetracycline, but also shed a new light on the cyclic economy and the sustainable development. Copyright © 2018 Elsevier B.V. All rights reserved.

Advanced nickel-metal hydride cell development. Final report, September 1993--March 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lim, Hong S.

1996-03-01

Inert gas atomization using metal hydride alloys for a Ni/MH{sub x}cell was studied. Atomization of the alloys was demonstrated on a small production scale up to batch size of several kg. Relative performance of the atomized and nonatomized alloys was investigated for the electrode material in a Ni/MH{sub x} cell. The study included effects of charge-discharge rates, temperature, and particle size on cell voltage (polarization) and specific capacity. Results show that the specific capacity of the present atomized alloys was apprecialy smaller than that of the nonatomized powder, especially for initial cycles. Full activation of the atomized alloys oftentook severalmore » hundreds of cycles. However, no appreciable difference in discharge rate capability was observed with R10 and R12 alloys. Chemical compositions were indistinguishable, although the oxygen contents of the atomized alloys were always higher. Effects of Ni and Cu coating on alloy performance were studied after electroless coating; the coatings noticeably improved the electrode rate capability for all the alloys. The electrode polarization was esecially improved, but not the cycle life. Further studies are needed.« less

Crif1 Deficiency Reduces Adipose OXPHOS Capacity and Triggers Inflammation and Insulin Resistance in Mice

PubMed Central

Ryu, Min Jeong; Kim, Soung Jung; Kim, Yong Kyung; Choi, Min Jeong; Tadi, Surendar; Lee, Min Hee; Lee, Seong Eun; Chung, Hyo Kyun; Jung, Saet Byel; Kim, Hyun-Jin; Jo, Young Suk; Kim, Koon Soon; Lee, Sang-Hee; Kim, Jin Man; Kweon, Gi Ryang; Park, Ki Cheol; Lee, Jung Uee; Kong, Young Yun; Lee, Chul-Ho; Chung, Jongkyeong; Shong, Minho

2013-01-01

Impaired mitochondrial oxidative phosphorylation (OXPHOS) has been proposed as an etiological mechanism underlying insulin resistance. However, the initiating organ of OXPHOS dysfunction during the development of systemic insulin resistance has yet to be identified. To determine whether adipose OXPHOS deficiency plays an etiological role in systemic insulin resistance, the metabolic phenotype of mice with OXPHOS–deficient adipose tissue was examined. Crif1 is a protein required for the intramitochondrial production of mtDNA–encoded OXPHOS subunits; therefore, Crif1 haploinsufficient deficiency in mice results in a mild, but specific, failure of OXPHOS capacity in vivo. Although adipose-specific Crif1-haploinsufficient mice showed normal growth and development, they became insulin-resistant. Crif1-silenced adipocytes showed higher expression of chemokines, the expression of which is dependent upon stress kinases and antioxidant. Accordingly, examination of adipose tissue from Crif1-haploinsufficient mice revealed increased secretion of MCP1 and TNFα, as well as marked infiltration by macrophages. These findings indicate that the OXPHOS status of adipose tissue determines its metabolic and inflammatory responses, and may cause systemic inflammation and insulin resistance. PMID:23516375

Improvements on the relationship between plume height and mass eruption rate: Implications for volcanic ash cloud forecasting

NASA Astrophysics Data System (ADS)

Webley, P. W.; Dehn, J.; Mastin, L. G.; Steensen, T. S.

2011-12-01

Volcanic ash plumes and the dispersing clouds into the atmosphere are a hazard for local populations as well as for the aviation industry. Volcanic ash transport and dispersion (VATD) models, used to forecast the movement of these hazardous ash emissions, require eruption source parameters (ESP) such as plume height, eruption rate and duration. To estimate mass eruption rate, empirical relationships with observed plume height have been applied. Theoretical relationships defined by Morton et al. (1956) and Wilson et al. (1976) use default values for the environmental lapse rate (ELR), thermal efficiency, density of ash, specific heat capacity, initial temperature of the erupted material and final temperature of the material. Each volcano, based on its magma type, has a different density, specific heat capacity and initial eruptive temperature compared to these default parameters, and local atmospheric conditions can produce a very different ELR. Our research shows that a relationship between plume height and mass eruption rate can be defined for each eruptive event for each volcano. Additionally, using the one-dimensional modeling program, Plumeria, our analysis assesses the importance of factors such as vent diameter and eruption velocity on the relationship between the eruption rate and measured plume height. Coupling such a tool with a VATD model should improve pre-eruptive forecasts of ash emissions downwind and lead to improvements in ESP data that VATD models use for operational volcanic ash cloud forecasting.

Development and Test Evaluations for Ni-DOBDC Metal Organic Framework (MOF) Engineered Forms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Troy G. Garn; Mitchell Greenhalgh

2013-07-01

A joint effort to prepare engineered forms of a Ni-DOBDC metal organic framework (MOF) was completed with contributions from PNNL, SNL and the INL. Two independent methods were used at INL and SNL to prepare engineered form (EF) sorbents from Ni-DOBDC MOF powder developed and prepared at PNNL. Xe and Kr capacity test evaluations were performed at ambient temperature with the cryostat experimental setup at INL. The initial INL EF MOF test results indicated a Xe capacity of 1.6 mmol/kg sorbent and no Kr capacity. A large loss of surface area also occurred during minimal testing rendering the INL EFmore » MOF unusable. Four capacity tests were completed using the SNL EF MOF at ambient temperature and resulted in Xe capacities of 1.4, 4.2, 5.0 and 3.8 mmol/kg sorbent with no Kr capacity observed in any ambient temperature tests. Two additional capacity tests were performed at 240 K to further evaluate SNL EF MOF performance. Xe capacities of 50.7 and 49.3 mmol/kg of sorbent and Kr capacities of 0.77 and 0.69 mmol/kg of sorbent were obtained, respectively. Following the adsorption evaluations, the SNL EF MOF material had lost about 40 % of the initial mass and 40 % of the initial surface area. In general, the Xe capacity results at ambient temperature for the INL and SNL EF Ni-DOBDC MOF’s were lower than 9.8 mmol Xe/kg sorbent test results reported by INL in FY-12 using PNNL’s inital EF supplied material.« less

The effect of nitrogen on the cycling performance in thin-film Si{sub 1-x}N{sub x} anode

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ahn, Donggi; Kim, Chunjoong; Lee, Joon-Gon

2008-09-15

The effects of nitrogen on the electrochemical properties of silicon-nitrogen (Si{sub 1-x}N{sub x}) thin films were examined in terms of their initial capacities and cycling properties. In particular, Si{sub 0.76}N{sub 0.24} thin films showed negligible initial capacity but an abrupt capacity increase to {approx}2300 mA h/g after {approx}650 cycles. The capacity of pure Si thin films was deteriorated to {approx}20% of the initial level after 200 cycles between 0.02 and 1.2 V at 0.5 C (1 C=4200 mA/g), whereas the Si{sub 0.76}N{sub 0.24} thin films exhibited excellent cycle-life performance after {approx}650 cycles. In addition, the Si{sub 0.76}N{sub 0.24} thin filmsmore » at 50 deg. C showed an abrupt capacity increase at an earlier stage of only {approx}30 cycles. The abnormal electrochemical behaviors in the Si{sub 0.76}N{sub 0.24} thin films were demonstrated to be correlated with the formation of Li{sub 3}N and Si{sub 3}N{sub 4}. - Graphical abstract: The Si{sub 0.76}N{sub 0.24} thin films showed negligible initial capacity, but an abrupt capacity increase to {approx}2300 mA h/g after {approx}650 cycles, followed by excellent cycle-life performance. This abnormal electrochemical behavior was demonstrated to be correlated with the formation of Li{sub 3}N and Si{sub 3}N{sub 4}.« less

Legal capacity of persons with disabilities in Ethiopia: The need to reform existing legal frameworks.

PubMed

Marishet, Mohammed Hamza

The Convention on the Rights of Persons with Disabilities (CRPD) prohibited deprivation legal capacity of persons with disability based on assessment of mental capacity. The assertion is that, persons with disabilities shall exercise their legal capacity in all aspects of life without any restrictions that are based on mental incapacity (such as, unsoundness of mind, deficit in mental capacity, dotage, etc. This approach signifies a shift from substituted decision making, where another person act on behalf of persons with mental disabilities, to supported decision making where the person with mental disability is assisted in decision making. The rationale for the move lies on the recognition that the right to legal capacity embodies the inherent meaning of what it meant to be human. Without legal capacity a person cannot exercise all other rights and entitlements. Accordingly, States parties to CRPD are required to reform domestic legislations that are based on substituted decision making model and recognize full legal capacity of persons with disabilities in line with supported decision making model. As a Sate party to CRPD, Ethiopia assumed the same obligation. Nonetheless, in its initial report to the Committee on CRPD, the country denies existence of legislation that restricts legal capacity on the grounds of mental incapacity. This research found out that there are restrictions imposed on legal capacity of persons with disabilities on the basis of mental incapacity/disability. The research analyzed the approach employed to restrict legal capacity under the existing legal frameworks of Ethiopia vis-à-vis supported decision-making regime under CRPD. The research is doctrinal and, as such, limited to content analysis of general and specific legal capacity laws of the country (such as, marriage, divorce, will, work and employment, political participation, access to justice and others). Copyright © 2017 Elsevier Ltd. All rights reserved.

Temporary Losses of Highway Capacity and Impacts on Performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chin, S.M.

2002-07-31

Traffic congestion and its impacts significantly affect the nation's economic performance and the public's quality of life. In most urban areas, travel demand routinely exceeds highway capacity during peak periods. In addition, events such as crashes, vehicle breakdowns, work zones, adverse weather, and suboptimal signal timing cause temporary capacity losses, often worsening the conditions on already congested highway networks. The impacts of these temporary capacity losses include delay, reduced mobility, and reduced reliability of the highway system. They can also cause drivers to re-route or reschedule trips. Prior to this study, no nationwide estimates of temporary losses of highway capacitymore » had been made by type of capacity-reducing event. Such information is vital to formulating sound public policies for the highway infrastructure and its operation. This study is an initial attempt to provide nationwide estimates of the capacity losses and delay caused by temporary capacity-reducing events. The objective of this study was to develop and implement methods for producing national-level estimates of the loss of capacity on the nation's highway facilities due to temporary phenomena as well as estimates of the impacts of such losses. The estimates produced by this study roughly indicate the magnitude of problems that are likely be addressed by the Congress during the next re-authorization of the Surface Transportation Programs. The scope of the study includes all urban and rural freeways and principal arterials in the nation's highway system for 1999. Specifically, this study attempts to quantify the extent of temporary capacity losses due to crashes, breakdowns, work zones, weather, and sub-optimal signal timing. These events can cause impacts such as capacity reduction, delays, trip rescheduling, rerouting, reduced mobility, and reduced reliability. This study focuses on the reduction of capacity and resulting delays caused by the temporary events mentioned above. Impacts other than capacity losses and delay, such as re-routing, rescheduling, reduced mobility, and reduced reliability, are not covered in this phase of research.« less

20 CFR 220.121 - Responsibility for assessing and determining residual functional capacity.

Code of Federal Regulations, 2010 CFR

2010-04-01

... residual functional capacity. 220.121 Section 220.121 Employees' Benefits RAILROAD RETIREMENT BOARD REGULATIONS UNDER THE RAILROAD RETIREMENT ACT DETERMINING DISABILITY Residual Functional Capacity § 220.121 Responsibility for assessing and determining residual functional capacity. (a) For cases at the initial or...

20 CFR 220.121 - Responsibility for assessing and determining residual functional capacity.

Code of Federal Regulations, 2011 CFR

2011-04-01

... residual functional capacity. 220.121 Section 220.121 Employees' Benefits RAILROAD RETIREMENT BOARD REGULATIONS UNDER THE RAILROAD RETIREMENT ACT DETERMINING DISABILITY Residual Functional Capacity § 220.121 Responsibility for assessing and determining residual functional capacity. (a) For cases at the initial or...

Sandwich-Type Nitrogen and Sulfur Codoped Graphene-Backboned Porous Carbon Coated Separator for High Performance Lithium-Sulfur Batteries.

PubMed

Chen, Feng; Ma, Lulu; Ren, Jiangang; Luo, Xinyu; Liu, Bibo; Zhou, Xiangyang

2018-03-26

Lithium-sulfur (Li-S) batteries have been identified as the greatest potential next- generation energy-storage systems because of the large theoretical energy density of 2600 Wh kg -1 . However, its practical application on a massive scale is impeded by severe capacity loss resulted from the notorious polysulfides shuttle. Here, we first present a novel technique to synthesize sandwich-type nitrogen and sulfur codoped graphene-backboned porous carbon (NSGPC) to modify the commercial polypropylene separator in Li-S batteries. The as-synthesized NSGPC exhibits a unique micro/mesoporous carbon framework, large specific surface area (2439.0 m² g -1 ), high pore volume (1.78 cm³ g -1 ), good conductivity, and in situ nitrogen (1.86 at %) and sulfur (5.26 at %) co-doping. Benefiting from the particular physical properties and chemical components of NSGPC, the resultant NSGPC-coated separator not only can facilitate rapid Li⁺ ions and electrons transfer, but also can restrict the dissolution of polysulfides to alleviate the shuttle effect by combining the physical absorption and strong chemical adsorption. As a result, Li-S batteries with NSGPC-coated separator exhibit high initial reversible capacity (1208.6 mAh g -1 at 0.2 C), excellent rate capability (596.6 mAh g -1 at 5 C), and superior cycling stability (over 500 cycles at 2 C with 0.074% capacity decay each cycle). Propelling our easy-designed pure sulfur cathode to a extremely increased mass loading of 3.4 mg cm -2 (70 wt. % sulfur), the Li-S batteries with this functional composite separator exhibit a superior high initial capacity of 1171.7 mAh g -1 , which is quite beneficial to commercialized applications.

Sandwich-Type Nitrogen and Sulfur Codoped Graphene-Backboned Porous Carbon Coated Separator for High Performance Lithium-Sulfur Batteries

PubMed Central

Chen, Feng; Ma, Lulu; Ren, Jiangang; Luo, Xinyu; Liu, Bibo; Zhou, Xiangyang

2018-01-01

Lithium-sulfur (Li-S) batteries have been identified as the greatest potential next- generation energy-storage systems because of the large theoretical energy density of 2600 Wh kg−1. However, its practical application on a massive scale is impeded by severe capacity loss resulted from the notorious polysulfides shuttle. Here, we first present a novel technique to synthesize sandwich-type nitrogen and sulfur codoped graphene-backboned porous carbon (NSGPC) to modify the commercial polypropylene separator in Li-S batteries. The as-synthesized NSGPC exhibits a unique micro/mesoporous carbon framework, large specific surface area (2439.0 m2 g−1), high pore volume (1.78 cm3 g−1), good conductivity, and in situ nitrogen (1.86 at %) and sulfur (5.26 at %) co-doping. Benefiting from the particular physical properties and chemical components of NSGPC, the resultant NSGPC-coated separator not only can facilitate rapid Li+ ions and electrons transfer, but also can restrict the dissolution of polysulfides to alleviate the shuttle effect by combining the physical absorption and strong chemical adsorption. As a result, Li-S batteries with NSGPC-coated separator exhibit high initial reversible capacity (1208.6 mAh g−1 at 0.2 C), excellent rate capability (596.6 mAh g−1 at 5 C), and superior cycling stability (over 500 cycles at 2 C with 0.074% capacity decay each cycle). Propelling our easy-designed pure sulfur cathode to a extremely increased mass loading of 3.4 mg cm−2 (70 wt. % sulfur), the Li-S batteries with this functional composite separator exhibit a superior high initial capacity of 1171.7 mAh g−1, which is quite beneficial to commercialized applications. PMID:29587467

Influences of operational practices on municipal solid waste landfill storage capacity.

PubMed

Li, Yu-Chao; Liu, Hai-Long; Cleall, Peter John; Ke, Han; Bian, Xue-Cheng

2013-03-01

The quantitative effects of three operational factors, that is initial compaction, decomposition condition and leachate level, on municipal solid waste (MSW) landfill settlement and storage capacity are investigated in this article via consideration of a hypothetical case. The implemented model for calculating landfill compression displacement is able to consider decreases in compressibility induced by biological decomposition and load dependence of decomposition compression for the MSW. According to the investigation, a significant increase in storage capacity can be achieved by intensive initial compaction, adjustment of decomposition condition and lowering of leachate levels. The quantitative investigation presented aims to encourage landfill operators to improve management to enhance storage capacity. Furthermore, improving initial compaction and creating a preferential decomposition condition can also significantly reduce operational and post-closure settlements, respectively, which helps protect leachate and gas management infrastructure and monitoring equipment in modern landfills.

Effect of surface hydroxyl groups on heat capacity of mesoporous silica

NASA Astrophysics Data System (ADS)

Marszewski, Michal; Butts, Danielle; Lan, Esther; Yan, Yan; King, Sophia C.; McNeil, Patricia E.; Galy, Tiphaine; Dunn, Bruce; Tolbert, Sarah H.; Hu, Yongjie; Pilon, Laurent

2018-05-01

This paper quantifies the effect of surface hydroxyl groups on the effective specific and volumetric heat capacities of mesoporous silica. To achieve a wide range of structural diversity, mesoporous silica samples were synthesized by various methods, including (i) polymer-templated nanoparticle-based powders, (ii) polymer-templated sol-gel powders, and (iii) ambigel silica samples dried by solvent exchange at room temperature. Their effective specific heat capacity, specific surface area, and porosity were measured using differential scanning calorimetry and low-temperature nitrogen adsorption-desorption measurements. The experimentally measured specific heat capacity was larger than the conventional weight-fraction-weighted specific heat capacity of the air and silica constituents. The difference was attributed to the presence of OH groups in the large internal surface area. A thermodynamic model was developed based on surface energy considerations to account for the effect of surface OH groups on the specific and volumetric heat capacity. The model predictions fell within the experimental uncertainty.

Unmasking the component-general and component-specific aspects of primary and secondary memory in the immediate free recall task.

PubMed

Gibson, Bradley S; Gondoli, Dawn M

2018-04-01

The immediate free recall (IFR) task has been commonly used to estimate the capacities of the primary memory (PM) and secondary memory (SM) components of working memory (WM). Using this method, the correlation between estimates of the PM and SM components has hovered around zero, suggesting that PM and SM represent fully distinct and dissociable components of WM. However, this conclusion has conflicted with more recent studies that have observed moderately strong, positive correlations between PM and SM when separate attention and retrieval tasks are used to estimate these capacities, suggesting that PM and SM represent at least some related capacities. The present study attempted to resolve this empirical discrepancy by investigating the extent to which the relation between estimates of PM and SM might be suppressed by a third variable that operates during the recall portion of the IFR task. This third variable was termed "strength of recency" (SOR) in the present study as it reflected differences in the extent to which individuals used the same experimentally-induced recency recall initiation strategy. As predicted, the present findings showed that the positive correlation between estimates of PM and SM grew from small to medium when the indirect effect of SOR was controlled across two separate sets of studies. This finding is important because it provides stronger support for the distinction between "component-general" and "component-specific" aspects of PM and SM; furthermore, a proof is presented that demonstrates a limitation of using regression techniques to differentiate general and specific aspects of these components.

The potential effects of pH and buffering capacity on dental erosion.

PubMed

Owens, Barry M

2007-01-01

Soft drink pH (initial pH) has been shown to be a causative factor--but not necessarily the primary initiating factor--of dental erosion. The titratable acidity or buffering capacity has been acknowledged as playing a significant role in the etiology of these lesions. This in vitro study sought to evaluate five different soft drinks (Coca-Cola Classic, Diet Coke, Gatorade sports drink, Red Bull high-energy drink, Starbucks Frappucino coffee drink) and tap water (control) in terms of initial pH and buffering capacity. Initial pH was measured in triplicate for the six beverages. The buffering capacity of each beverage was assessed by measuring the weight (in grams) of 0.10 M sodium hydroxide necessary for titration to pH levels of 5.0, 6.0, 7.0, and 8.3. Coca-Cola Classic produced the lowest mean pH, while Starbucks Frappucino produced the highest pH of any of the drinks except for tap water. Based on statistical analysis using ANOVA and Fisher's post hoc tests at a P < 0.05 level of significance, Red Bull had the highest mean buffering capacity (indicating the strongest potential for erosion of enamel), followed by Gatorade, Coca-Cola Classic, Diet Coke, and Starbucks Frappucino.

A Healthy Communities Initiative in Rural Alberta: Building Rural Capacity for Health.

ERIC Educational Resources Information Center

GermAnn, Kathy; Smith, Neale; Littlejohns, Lori Baugh

Efforts of health professionals are shifting away from programs that "deliver health" toward those that build the capacity of communities to work together to create healthy places. The Healthy Communities Initiative (HCI) is a community development model in central Alberta (Canada) that involves the creation of a widely shared vision of…

Porous Co3O4 nanorods anchored on graphene nanosheets as an effective electrocatalysts for aprotic Li-O2 batteries

NASA Astrophysics Data System (ADS)

Yuan, Mengwei; Yang, Yan; Nan, Caiyun; Sun, Genban; Li, Huifeng; Ma, Shulan

2018-06-01

The large over-potential during the battery operation is a great obstacle for the application of Li-O2 batteries. The porous structure and electrical conductivity of the electrocatalysts are significant for the electrocatalytic performance of Li-O2 batteries. In this work, a porous Co3O4/GN nanocomposite (Co3O4 nanorods anchored on graphene nanosheets) is prepared via a facile hydrothermal method assisted with heat treatment. The unique structure of Co3O4/GN endows efficient electrocatalystic activity for Li-O2 batteries. In comparison to the Co3O4, the Co3O4/GN demonstrates a better cycle performance showing more than 40 cycles with a 1500 mAh g-1 capacity limit strategy at a current density of 300 mA g-1, and a reduced over-potential of 110 mV at high current density (1200 mA g-1). The Co3O4/GN also displays a high initial specific capacity (7600 mAh g-1) and a good reversibility in full cycle with a coulombic efficiency of 99.8% in the first cycle. The impressed cyclability, specific capacity, rate performance, and low over-potentials indicate that the as-prepared Co3O4/GN nanocomposite is a promising catalyst candidate for reversible Li-O2 batteries.

Enhanced electrochemical performance of Li-rich layered cathode materials via chemical activation of Li2MnO3 component and formation of spinel/carbon coating layer

NASA Astrophysics Data System (ADS)

Pang, Shengli; Xu, Kaijie; Wang, Yonggang; Shen, Xiangqian; Wang, Wenzhi; Su, Yanjing; Zhu, Meng; Xi, Xiaoming

2017-10-01

Li-rich layered oxides are promising cathode materials for advanced Li-ion batteries because of their high specific capacity and operating potential. In this work, the Li-rich layered oxide Li1·2Mn0·54Ni0·13Co0·13O2 (LMNC), is modified via a carbonization-reduction process (yielding the corresponding reduced compound denoted LMNC-R). Compared to the pristine oxide, LMNC-R delivers significantly enhanced initial discharge capacity/columbic efficiency, remarkably improved rate performance with an accelerated Li+ diffusion rate, and significantly increased capacity/voltage retention. The specific energy density and energy retention after 100 cycles increase from 378.2 Wh kg-1 and 47.7% for LMNC to 572.0 Wh kg-1 and 71.3%, respectively, for LMNC-R. The enhancement in the electrochemical performance of LMNC-R can be attributed to the synchronous formation of the oxygen non-stoichiometric Li2MnO3-δ component and to the carbon/spinel double coating layer in the material that resulted from the post-treatment process. Thus, the carbonization-reduction modification process can be used to tailor the structural evolution procedure and to suppress the metal ion dissolution of the Li-rich layered oxide during cycling.

Enhanced electrochemical properties of F-doped Li2MnSiO4/C for lithium ion batteries

NASA Astrophysics Data System (ADS)

Wang, Chao; Xu, Youlong; Sun, Xiaofei; Zhang, Baofeng; Chen, Yanjun; He, Shengnan

2018-02-01

The Li2MnSiO4 as a novel cathode material for lithium ion batteries, performs high specific capacity, high thermal stability, low cost and etc. However, it suffers from relatively low electronic conductivity and lithium ion diffusion rate. Herein, we successfully introduce fluorine to Li2MnSiO4 (Li2MnSiO4-xFx, x = 0.00, 0.01, 0.03 and 0.05) to overcome these obstacles. The results show that F doping not only enlarges the lattice parameters but also decreases the particle size, synergistically improving the lithium ion diffusion of Li2MnSiO4. Moreover, F doping increase electronic conductivity of Li2MnSiO4/C by inhibiting the formation of C-O bonds in the carbon layers. Meanwhile, F doping improves the crystallinity and stabilizes the crystal structure of Li2MnSiO4. Finally, the Li2MnSiO3.97F0.03/C with the best electrochemical performances delivers the initial specific discharge capacity of 279 mA h g-1 at 25mA g-1 current density from 1.5 V to 4.8 V. Also, it maintains a higher capacity (201 mA h g-1) than F-free Li2MnSiO4 (145 mA h g-1) after 50 cycles.

Dissecting Stages of Human Kidney Development and Tumorigenesis with Surface Markers Affords Simple Prospective Purification of Nephron Stem Cells.

PubMed

Pode-Shakked, Naomi; Pleniceanu, Oren; Gershon, Rotem; Shukrun, Rachel; Kanter, Itamar; Bucris, Efrat; Pode-Shakked, Ben; Tam, Gal; Tam, Hadar; Caspi, Revital; Pri-Chen, Sara; Vax, Einav; Katz, Guy; Omer, Dorit; Harari-Steinberg, Orit; Kalisky, Tomer; Dekel, Benjamin

2016-03-29

When assembling a nephron during development a multipotent stem cell pool becomes restricted as differentiation ensues. A faulty differentiation arrest in this process leads to transformation and initiation of a Wilms' tumor. Mapping these transitions with respective surface markers affords accessibility to specific cell subpopulations. NCAM1 and CD133 have been previously suggested to mark human renal progenitor populations. Herein, using cell sorting, RNA sequencing, in vitro studies with serum-free media and in vivo xenotransplantation we demonstrate a sequential map that links human kidney development and tumorigenesis; In nephrogenesis, NCAM1(+)CD133(-) marks SIX2(+) multipotent renal stem cells transiting to NCAM1(+)CD133(+) differentiating segment-specific SIX2(-) epithelial progenitors and NCAM1(-)CD133(+) differentiated nephron cells. In tumorigenesis, NCAM1(+)CD133(-) marks SIX2(+) blastema that includes the ALDH1(+) WT cancer stem/initiating cells, while NCAM1(+)CD133(+) and NCAM1(-)CD133(+) specifying early and late epithelial differentiation, are severely restricted in tumor initiation capacity and tumor self-renewal. Thus, negative selection for CD133 is required for defining NCAM1(+) nephron stem cells in normal and malignant nephrogenesis.

Association between Functional Capacity Decline and Nutritional Status Based on the Nutrition Screening Initiative Checklist: A 2-Year Cohort Study of Japanese Community-Dwelling Elderly.

PubMed

Sugiura, Yumiko; Tanimoto, Yoshimi; Imbe, Ayumi; Inaba, Yuiko; Sakai, Satoshi; Shishikura, Kanako; Tanimoto, Keiji; Hanafusa, Toshiaki

2016-01-01

To assess whether nutritional status based on the Nutrition Screening Initiative Checklist is useful for predicting functional capacity decline in community-dwelling Japanese elderly. This two-year observational cohort study included 536 community-dwelling Japanese (65 years and older at baseline) who were independent in both activities and instrumental activities of daily living. Demographic attributes, chronic illness, lifestyle-related habits, nutritional status, functional capacity, and anthropometric measurements were assessed, with decline in functional capacity used as the outcome measure. Subjects were classified into three groups as follows based on the Nutrition Screening Initiative Checklist: low (59.5%), moderate (23.7%), and high (16.8%) nutritional risk. Significant differences were found between nutritional status and the following four baseline variables: age, hypertension, cerebrovascular diseases, and current smoking. However, no significant differences were evident between nutritional status and sex, body mass index, diabetes, drinking habit, or exercise habit. Logistic regression analysis adjusted for age, sex, body mass index, hypertension, cerebrovascular diseases and smoking habit showed that the high nutritional risk group was significantly associated with a decline in both activities of daily living (odds ratio: 4.96; 95% confidence interval (CI): 1.59-15.50) and instrumental activities of daily living (OR: 2.58; 95% CI: 1.31-5.06) compared with the low nutritional risk group. Poor nutritional status based on the Nutrition Screening Initiative Checklist was associated with a decline in functional capacity over a 2-year period in community-dwelling Japanese elderly. These results suggest that the Nutrition Screening Initiative Checklist is a suitable tool for predicting functional capacity decline in community-dwelling elderly.

40 CFR 98.468 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... design capacity, the calculation must include a site-specific density. If the design capacity is within... process that can reasonably be expected to change the site-specific waste density, the site-specific waste density must be redetermined and the design capacity must be recalculated based on the new waste density...

40 CFR 98.468 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... design capacity, the calculation must include a site-specific density. If the design capacity is within... process that can reasonably be expected to change the site-specific waste density, the site-specific waste density must be redetermined and the design capacity must be recalculated based on the new waste density...

Effect of in situ pyrolysis of acetylene (C2H2) gas as a carbon source on the electrochemical performance of LiFePO4 for rechargeable lithium-ion batteries

NASA Astrophysics Data System (ADS)

Saroha, Rakesh; Panwar, Amrish K.

2017-06-01

The intention of this work is to study the effect of in situ pyrolysis of acetylene (C2H2) gas used as a carbon source on the physicochemical and electrochemical performance of pristine LiFePO4 (LFP). Acetylene gas, which decomposed to carbon and methane along with some side products when exposed to high temperature (>625 °C), is used as a carbon source for coating over the surface of LFP particles. Thermogravimetric (TGA) measurements were performed in an air atmosphere, primarily to estimate the exact amount of carbon deposited on the surface of the olivine cathode material due to the decomposition of C2H2 gas. Raman and TGA results confirm the presence of carbon as coated on the surface of the prepared compositions. Among all the synthesized samples, LFP with 10 min C2H2 treatment (LFPC10) shows the highest discharge capacity at all C-rates and exhibits excellent rate performance. LFPC10 delivers a specific discharge capacity of 144 (±5) mAh g-1 (~85% of the theoretical capacity of 170 mAh g-1) at 0.1C rate. LFPC10 demonstrates the best cycling performance as it offers an initial discharge capacity of about 117 (±5) mAh g-1 (~69% of the theoretical capacity) at 1C-rate and has 97% capacity retention even after 100 charge/discharge cycles.

Cryptic out-of-frame translational initiation of TBCE rescues tubulin formation in compound heterozygous HRD.

PubMed

Tian, Guoling; Huang, Melissa C; Parvari, Ruti; Diaz, George A; Cowan, Nicholas J

2006-09-05

Microtubules are indispensable dynamic structures that contribute to many essential biological functions. Assembly of the native alpha/beta tubulin heterodimer, the subunit that polymerizes to form microtubules, requires the participation of several molecular chaperones, namely prefoldin, the cytosolic chaperonin CCT, and a series of five tubulin-specific chaperones termed cofactors A-E (TBCA-E). Among these, TBCC, TBCD, and TBCE are essential in higher eukaryotes; they function together as a multimolecular machine that assembles quasinative CCT-generated alpha- and beta-tubulin polypeptides into new heterodimers. Deletion and truncation mutations in the gene encoding TBCE have been shown to cause the rare autosomal recessive syndrome known as HRD, a devastating disorder characterized by congenital hypoparathyroidism, mental retardation, facial dysmorphism, and extreme growth failure. Here we identify cryptic translational initiation at each of three out-of-frame AUG codons upstream of the genetic lesion as a unique mechanism that rescues a mutant HRD allele by producing a functional TBCE protein. Our data explain how afflicted individuals, who would otherwise lack the capacity to make functional TBCE, can survive and point to a limiting capacity to fold tubulin heterodimers de novo as a contributing factor to disease pathogenesis.

Cryptic out-of-frame translational initiation of TBCE rescues tubulin formation in compound heterozygous HRD

PubMed Central

Tian, Guoling; Huang, Melissa C.; Parvari, Ruti; Diaz, George A.; Cowan, Nicholas J.

2006-01-01

Microtubules are indispensable dynamic structures that contribute to many essential biological functions. Assembly of the native α/β tubulin heterodimer, the subunit that polymerizes to form microtubules, requires the participation of several molecular chaperones, namely prefoldin, the cytosolic chaperonin CCT, and a series of five tubulin-specific chaperones termed cofactors A–E (TBCA–E). Among these, TBCC, TBCD, and TBCE are essential in higher eukaryotes; they function together as a multimolecular machine that assembles quasinative CCT-generated α- and β-tubulin polypeptides into new heterodimers. Deletion and truncation mutations in the gene encoding TBCE have been shown to cause the rare autosomal recessive syndrome known as HRD, a devastating disorder characterized by congenital hypoparathyroidism, mental retardation, facial dysmorphism, and extreme growth failure. Here we identify cryptic translational initiation at each of three out-of-frame AUG codons upstream of the genetic lesion as a unique mechanism that rescues a mutant HRD allele by producing a functional TBCE protein. Our data explain how afflicted individuals, who would otherwise lack the capacity to make functional TBCE, can survive and point to a limiting capacity to fold tubulin heterodimers de novo as a contributing factor to disease pathogenesis. PMID:16938882

Evaluating Training Programs for Primary Care Providers in Child/Adolescent Mental Health in Canada: A Systematic Review

PubMed Central

Espinet, Stacey; Naqvi, Reza; Lingard, Lorelei; Steele, Margaret

2018-01-01

Introduction The need for child/adolescent mental health care in Canada is growing. Primary care can play a key role in filling this gap, yet most providers feel they do not have adequate training. This paper reviews the Canadian literature on capacity building programs in child and adolescent psychiatry for primary care providers, to examine how these programs are being implemented and evaluated to contribute to evidence-based initiatives. Methods A systematic literature review of peer-reviewed published articles of capacity building initiatives in child/adolescent mental health care for primary care practitioners that have been implemented in Canada. Results Sixteen articles were identified that met inclusion criteria. Analysis revealed that capacity building initiatives in Canada are varied but rigorous evaluation methodology is lacking. Primary care providers welcome efforts to increase mental health care capacity and were satisfied with the implementation of most programs. Discussion Objective conclusions regarding the effectiveness of these programs to increase mental health care capacity is challenging given the evaluation methodology of these studies. Conclusion Rigorous evaluation methods are needed to make evidence-based decisions on ways forward to be able to build child/adolescent mental health care capacity in primary care. Outcome measures need to move beyond self-report to more objective measures, and should expand the measurement of patient outcomes to ensure that these initiative are indeed leading to improved care for families. PMID:29662521

Battery designs with high capacity anode materials and cathode materials

DOEpatents

Masarapu, Charan; Anguchamy, Yogesh Kumar; Han, Yongbong; Deng, Haixia; Kumar, Sujeet; Lopez, Herman A.

2017-10-03

Improved high energy capacity designs for lithium ion batteries are described that take advantage of the properties of high specific capacity anode active compositions and high specific capacity cathode active compositions. In particular, specific electrode designs provide for achieving very high energy densities. Furthermore, the complex behavior of the active materials is used advantageously in a radical electrode balancing design that significantly reduced wasted electrode capacity in either electrode when cycling under realistic conditions of moderate to high discharge rates and/or over a reduced depth of discharge.

Improve electrochemical performance of CeO2 surface modification LiNi0.80Co0.15Al0.05O2 cathode material

NASA Astrophysics Data System (ADS)

Xia, Shubiao; Zhang, Yingjie; Dong, Peng; Zhang, Yannan

2014-06-01

Lithium ion battery cathode material LiNi0.8Co0.15Al0.05O2 cathode has successfully prepared by co-precipitation. CeO2 surface modification has improved LiNi0.80Co0.15Al0.05O2 electrochemical performance use sol-gel method and subsequent heat treatment at 600 °C for 5 h. Different to other conventional coating material, CeO2 coating layer can not only inhibit the reaction of the electrode and the electrolyte, but also can reduce the impedance of electron transfer due to its high conductivity, and inhibit the production of Ni2+ because of its high oxidation. The surface-modified and pristine LiNi0.80Co0.15Al0.05O2 powders are characterized by XRD, SEM, TEM, XPS, CV and DSC. When CeO2 coating is 0.02% (mole ratio), contrast to pristine NCA, the CeO2-coated NCA cathode exhibits no decrease in its initial specific capacity of 184 mAh g -1 (at 0.2 C) and excellent capacity retention (86% of its initial capacity at 1 C) between 2.75 and 4.3 V after 100 cycles. The results indicate that the CeO2 surface treatment should be an effective way to improve cycle properties due to CeO2 inhibit the electrodes and the electrolyte side effects.

Building capacity for knowledge translation in occupational therapy: learning through participatory action research.

PubMed

Bennett, Sally; Whitehead, Mary; Eames, Sally; Fleming, Jennifer; Low, Shanling; Caldwell, Elizabeth

2016-10-01

There has been widespread acknowledgement of the need to build capacity in knowledge translation however much of the existing work focuses on building capacity amongst researchers rather than with clinicians directly. This paper's aim is to describe a research project for developing a knowledge translation capacity building program for occupational therapy clinicians. Participatory action research methods were used to both develop and evaluate the knowledge translation capacity-building program. Participants were occupational therapists from a large metropolitan hospital in Australia. Researchers and clinicians worked together to use the action cycle of the Knowledge to Action Framework to increase use of knowledge translation itself within the department in general, within their clinical teams, and to facilitate knowledge translation becoming part of the department's culture. Barriers and enablers to using knowledge translation were identified through a survey based on the Theoretical Domains Framework and through focus groups. Multiple interventions were used to develop a knowledge translation capacity-building program. Fifty-two occupational therapists participated initially, but only 20 across the first 18 months of the project. Barriers and enablers were identified across all domains of the Theoretical Domains Framework. Interventions selected to address these barriers or facilitate enablers were categorised into ten different categories: educational outreach; teams working on clinical knowledge translation case studies; identifying time blocks for knowledge translation; mentoring; leadership strategies; communication strategies; documentation and resources to support knowledge translation; funding a knowledge translation champion one day per week; setting goals for knowledge translation; and knowledge translation reporting strategies. Use of these strategies was, and continues to be monitored. Participants continue to be actively involved in learning and shaping the knowledge translation program across the department and within their specific clinical areas. To build capacity for knowledge translation, it is important to involve clinicians. The action cycle of the Knowledge to Action framework is a useful guide to introduce the knowledge translation process to clinicians. It may be used to engage the department as a whole, and facilitate the learning and application of knowledge translation within specific clinical areas. Research evaluating this knowledge translation program is being conducted.

Building Capacity for Protected Area Management in Lao PDR

NASA Astrophysics Data System (ADS)

Rao, Madhu; Johnson, Arlyne; Spence, Kelly; Sypasong, Ahnsany; Bynum, Nora; Sterling, Eleanor; Phimminith, Thavy; Praxaysombath, Bounthob

2014-04-01

Declining biodiversity in protected areas in Laos is attributed to unsustainable exploitation of natural resources. At a basic level, an important need is to develop capacity in academic and professional training institutions to provide relevant training to conservation professionals. The paper (a) describes the capacity building approach undertaken to achieve this goal, (b) evaluates the effectiveness of the approach in building capacity for implementing conservation and (c) reviews implementation outcomes. Strong linkages between organizations implementing field conservation, professional training institutions, and relevant Government agencies are central to enhancing effectiveness of capacity building initiatives aimed at improving the practice of conservation. Protected area management technical capacity needs will need to directly influence curriculum design to insure both relevance and effectiveness of training in improving protected area management. Sustainability of capacity building initiatives is largely dependent on the level of interest and commitment by host-country institutions within a supportive Government policy framework in addition to engagement of organizations implementing conservation.

Building capacity for protected area management in Lao PDR.

PubMed

Rao, Madhu; Johnson, Arlyne; Spence, Kelly; Sypasong, Ahnsany; Bynum, Nora; Sterling, Eleanor; Phimminith, Thavy; Praxaysombath, Bounthob

2014-04-01

Declining biodiversity in protected areas in Laos is attributed to unsustainable exploitation of natural resources. At a basic level, an important need is to develop capacity in academic and professional training institutions to provide relevant training to conservation professionals. The paper (a) describes the capacity building approach undertaken to achieve this goal, (b) evaluates the effectiveness of the approach in building capacity for implementing conservation and (c) reviews implementation outcomes. Strong linkages between organizations implementing field conservation, professional training institutions, and relevant Government agencies are central to enhancing effectiveness of capacity building initiatives aimed at improving the practice of conservation. Protected area management technical capacity needs will need to directly influence curriculum design to insure both relevance and effectiveness of training in improving protected area management. Sustainability of capacity building initiatives is largely dependent on the level of interest and commitment by host-country institutions within a supportive Government policy framework in addition to engagement of organizations implementing conservation.

Implicit signals in small group settings and their impact on the expression of cognitive capacity and associated brain responses

PubMed Central

Kishida, Kenneth T.; Yang, Dongni; Quartz, Karen Hunter; Quartz, Steven R.; Montague, P. Read

2012-01-01

Measures of intelligence, when broadcast, serve as salient signals of social status, which may be used to unjustly reinforce low-status stereotypes about out-groups' cultural norms. Herein, we investigate neurobehavioural signals manifest in small (n = 5) groups using functional magnetic resonance imaging and a ‘ranked group IQ task’ where implicit signals of social status are broadcast and differentiate individuals based on their expression of cognitive capacity. We report an initial overall decrease in the expression of cognitive capacity in the small group setting. However, the environment of the ‘ranked group IQ task’ eventually stratifies the population into two groups (‘high performers’, HP and ‘low performers’, LP) identifiable based on changes in estimated intelligence quotient and brain responses in the amygdala and dorsolateral prefrontal cortex. In addition, we demonstrate signals in the nucleus accumbens consistent with prediction errors in expected changes in status regardless of group membership. Our results suggest that individuals express diminished cognitive capacity in small groups, an effect that is exacerbated by perceived lower status within the group and correlated with specific neurobehavioural responses. The impact these reactions have on intergroup divisions and conflict resolution requires further investigation, but suggests that low-status groups may develop diminished capacity to mitigate conflict using non-violent means. PMID:22271786

From Metal-Organic Framework to Li2S@C-Co-N Nanoporous Architecture: A High-Capacity Cathode for Lithium-Sulfur Batteries.

PubMed

He, Jiarui; Chen, Yuanfu; Lv, Weiqiang; Wen, Kechun; Xu, Chen; Zhang, Wanli; Li, Yanrong; Qin, Wu; He, Weidong

2016-12-27

Owing to the high theoretical specific capacity (1166 mAh g -1 ), lithium sulfide (Li 2 S) has been considered as a promising cathode material for Li-S batteries. However, the polysulfide dissolution and low electronic conductivity of Li 2 S limit its further application in next-generation Li-S batteries. In this report, a nanoporous Li 2 S@C-Co-N cathode is synthesized by liquid infiltration-evaporation of ultrafine Li 2 S nanoparticles into graphitic carbon co-doped with cobalt and nitrogen (C-Co-N) derived from metal-organic frameworks. The obtained Li 2 S@C-Co-N architecture remarkably immobilizes Li 2 S within the cathode structure through physical and chemical molecular interactions. Owing to the synergistic interactions between C-Co-N and Li 2 S nanoparticles, the Li 2 S@C-Co-N composite delivers a reversible capacity of 1155.3 (99.1% of theoretical value) at the initial cycle and 929.6 mAh g -1 after 300 cycles, with nearly 100% Coulombic efficiency and a capacity fading of 0.06% per cycle. It exhibits excellent rate capacities of 950.6, 898.8, and 604.1 mAh g -1 at 1C, 2C, and 4C, respectively. Such a cathode structure is promising for practical applications in high-performance Li-S batteries.

Dynamic Considerations for Control of Closed Life Support Systems

NASA Technical Reports Server (NTRS)

Babcock, P. S.; Auslander, D. M.; Spear, R. C.

1985-01-01

Reliability of closed life support systems depend on their ability to continue supplying the crew's needs during perturbations and equipment failures. The dynamic considerations interact with the basic static design through the sizing of storages, the specification of excess capacities in processors, and the choice of system initial state. A very simple system flow model was used to examine the possibilities for system failures even when there is sufficient storage to buffer the immediate effects of the perturbation. Two control schemes are shown which have different dynamic consequences in response to component failures.

Carbonized-leaf Membrane with Anisotropic Surfaces for Sodium-ion Battery.

PubMed

Li, Hongbian; Shen, Fei; Luo, Wei; Dai, Jiaqi; Han, Xiaogang; Chen, Yanan; Yao, Yonggang; Zhu, Hongli; Fu, Kun; Hitz, Emily; Hu, Liangbing

2016-01-27

A simple one-step thermal pyrolysis route has been developed to prepare carbon membrane from a natural leaf. The carbonized leaf membrane possesses anisotropic surfaces and internal hierarchical porosity, exhibiting a high specific capacity of 360 mAh/g and a high initial Coulombic efficiency of 74.8% as a binder-free, current-collector-free anode for rechargeable sodium ion batteries. Moreover, large-area carbon membranes with low contact resistance are fabricated by simply stacking and carbonizing leaves, a promising strategy toward large-scale sodium-ion battery developments.

LiNi(0.5)Mn(1.5)O4 porous nanorods as high-rate and long-life cathodes for Li-ion batteries.

PubMed

Zhang, Xiaolong; Cheng, Fangyi; Yang, Jingang; Chen, Jun

2013-06-12

Spinel-type LiNi0.5Mn1.5O4 porous nanorods assembled with nanoparticles have been prepared and investigated as high-rate and long-life cathode materials for rechargeable lithium-ion batteries. One-dimensional porous nanostructures of LiNi0.5Mn1.5O4 with ordered P4332 phase were obtained through solid-state Li and Ni implantation of porous Mn2O3 nanorods that resulted from thermal decomposition of the chain-like MnC2O4 precursor. The fabricated LiNi0.5Mn1.5O4 delivered specific capacities of 140 and 109 mAh g(-1) at 1 and 20 C rates, respectively. At a 5 C cycling rate, a capacity retention of 91% was sustained after 500 cycles, with extremely low capacity fade (<1%) during the initial 300 cycles. The remarkable performance was attributed to the porous 1D nanostructures that can accommodate strain relaxation by slippage at the subunits wall boundaries and provide short Li-ion diffusion distance along the confined dimension.

Gadolinium-hydrogen ion exchange of zirconium phosphate

NASA Technical Reports Server (NTRS)

Liu, D. C.; Power, J. L.

1972-01-01

The Gd(+3)/H(+) ion exchange on a commercial zirconium phosphate ion exchanger was investigated in chloride, sulfate, and phosphate solutions of Gd(+3) at gadolinium concentrations of 0.001 to 1 millimole per cc and in the pH range of 0 to 3.5. Relatively low Gd(+3) capacities, in the range of 0.01 to 0.1 millimole per g of ion exchanger were found at room temperature. A significant difference in Gd(+3) sorption was observed, depending on whether the ion exchanger was converted from initial conditions of greater or lesser Gd(+3) sorption than the specific final conditions. Correlations were found between decrease in Gd(+3) capacity and loss of exchanger phosphate groups due to hydrolysis during washing and between increase in capacity and treatment with H3PO4. Fitting of the experimental data to ideal ion exchange equilibrium expressions indicated that each Gd(+3) ion is sorbed on only one site of the ion exchanger. The selectivity quotient was determined to be 2.5 + or - 0.4 at room temperature on gadolinium desorption in chloride solutions.

A trilayer separator with dual function for high performance lithium-sulfur batteries

NASA Astrophysics Data System (ADS)

Song, Rensheng; Fang, Ruopian; Wen, Lei; Shi, Ying; Wang, Shaogang; Li, Feng

2016-01-01

In this article, we propose a trilayer graphene/polypropylene/Al2O3 (GPA) separator with dual function for high performance lithium-sulfur (Li-S) batteries. Graphene is coated on one side of polypropylene (PP) separator, which functions as a conductive layer and an electrolyte reservoir that allows for rapid electron and ion transport. Then Al2O3 particles are coated on the other side to further enhance thermal stability and safety of the graphene coated polypropylene (GCP) separator, which are touched with lithium metal anode in the Li-S battery. The GPA separator shows good thermal stability after heating at 157 °C for 10 min while both GCP and PP separators showing an obvious shrinkage about 10%. The initial discharge specific capacity of Li-S coin cell with a GPA separator could reach 1067.7 mAh g-1 at 0.2C. After 100 discharge/charge cycles, it can still deliver a reversible capacity of as high as 804.4 mAh g-1 with 75% capacity retention. The pouch cells further confirm that the trilayer design has great promise towards practical applications.

Building the Capacity to Manage Orthopaedic Trauma After a Catastrophe in a Low-Income Country.

PubMed

Furey, Andrew; Rourke, James; Larsen, Hans

2015-10-01

Providing trauma care in an austere environment is very challenging, especially when the country is faced with a natural disaster. Unfortunately the combination of these elements highlights the deficiencies in managing orthopaedic trauma both in a developing country and in the face of a natural disaster, exponentially amplifying the effects of each. When considering the implementation and practice of orthopaedic trauma care in such an environment, one must consider the initial phase of program development and look further to the future in the development of a resilient program, which is sustainable. Through the use of the example of Haiti and a specific Non-Governmental Organization, we discuss the evidence for and thoughts behind developing orthopaedic trauma care program immediately after a natural disaster. This program aims to build capacity and empower a developing nation's health professionals to advance the care of orthopaedic trauma patients. We describe a model of capacity building that serves as a framework to highlight the strengths and weaknesses of low-to middle-income countries in providing orthopaedic trauma care when faced with such a challenge.

Graphene/Sulfur/Carbon Nanocomposite for High Performance Lithium-Sulfur Batteries

PubMed Central

Jin, Kangke; Zhou, Xufeng; Liu, Zhaoping

2015-01-01

Here, we report a two-step synthesis of graphene/sulfur/carbon ternary composite with a multilayer structure. In this composite, ultrathin S layers are uniformly deposited on graphene nanosheets and covered by a thin layer of amorphous carbon derived from β-cyclodextrin on the surface. Such a unique microstructure, not only improves the electrical conductivity of sulfur, but also effectively inhibits the dissolution of polysulfides during charging/discharging processes. As a result, this ternary nanocomposite exhibits excellent electrochemical performance. It can deliver a high initial discharge and charge capacity of 1410 mAh·g−1 and 1370 mAh·g−1, respectively, and a capacity retention of 63.8% can be achieved after 100 cycles at 0.1 C (1 C = 1675 mA·g−1). A relatively high specific capacity of 450 mAh·g−1 can still be retained after 200 cycles at a high rate of 2 C. The synthesis process introduced here is simple and broadly applicable to the modification of sulfur cathode for better electrochemical performance. PMID:28347077

Biosorption of Cu(II) by powdered anaerobic granular sludge from aqueous medium.

PubMed

Zhou, Xu; Chen, Chuan; Wang, Aijie; Jiang, Guangming; Liu, Lihong; Xu, Xijun; Yuan, Ye; Lee, Duu-Jung; Ren, Nanqi

2013-01-01

Copper(II) biosorption processes by two pre-treated powdered anaerobic granular sludges (PAGS) (original sludges were methanogenic anaerobic granules and denitrifying sulfide removal (DSR) anaerobic granules) were investigated through batch tests. Factors affecting the biosorption process, such as pH, temperature and initial copper concentrations, were examined. Also, the physico-chemical characteristics of the anaerobic sludge were analyzed by Fourier transform infrared spectroscopy, scanning electron microscopy image, surface area and elemental analysis. A second-order kinetic model was applied to describe the biosorption process, and the model could fit the biosorption process. The Freundlich model was used for describing the adsorption equilibrium data and could fit the equilibrium data well. It was found that the methanogenic PAGS was more effective in Copper(II) biosorption process than the DSR PAGS, whose maximum biosorption capacity was 39.6% lower. The mechanisms of the biosorption capacities for different PAGS were discussed, and the conclusion suggested that the environment and biochemical reactions during the growth of biomass may have affected the structure of the PAGS. The methanogenic PAGS had larger specific surface area and more biosorption capacity than the DSR PAGS.

Poly(3,4-ethylene-dioxythiophene)-poly(styrenesulfonate) glued and graphene encapsulated sulfur-carbon film for high-performance free-standing lithium-sulfur batteries

NASA Astrophysics Data System (ADS)

Wang, Zhiyu; Cheng, Jianli; Ni, Wei; Gao, Lizhen; Yang, Dan; Razal, Joselito M.; Wang, Bin

2017-02-01

A novel free-standing composite film electrode for Li-S battery is investigated. This novel electrode consists of polyvinylpyrrolidone-coated hollow sulfur microspheres (PVPS) that are homogeneously confined within the conductive composite matrix of graphene and poly(3,4-ethylene-dioxythiophene)-poly(styrenesulfonate) (PEDOT-PSS). The characteristic large surface area and wrinkled surface of graphene sheets allow the formation of a conductive layer on the surface of PVPS to suppress the polysulfide dissolution and accommodate the volumetric expansion of sulfur. The addition of PEDOT-PSS also enhances the adhesion between the PVPS and the graphene surface, the overall conductivity of the electrode, and the charge transportation during the charging and discharging processes. The best electrode performances are achieved for a composite film cathode with a sulfur content of about 63.9%, which delivers an initial specific capacity of around 1060 mAh g-1 at 0.1 C. This electrode also displays an excellent capacity retention of 75% after 500 cycles at 1C, corresponding to a capacity decay of only 0.05% per cycle.

Physical Theory of Voltage Fade in Lithium- and Manganese-Rich Transition Metal Oxides

DOE PAGES

Rinaldo, Steven G.; Gallagher, Kevin G.; Long, Brandon R.; ...

2015-03-04

Lithium- and manganese-rich (LMR) transition metal oxide cathodes are of interest for lithium-ion battery applications due to their increased energy density and decreased cost. However, the advantages in energy density and cost are offset, in part, due to the phenomena of voltage fade. Specifically, the voltage profiles (voltage as a function of capacity) of LMR cathodes transform from a high energy configuration to a lower energy configuration as they are repeatedly charged (Li removed) and discharged (Li inserted). Here, we propose a physical model of voltage fade that accounts for the emergence of a low voltage Li phase due tomore » the introduction of transition metal ion defects within a parent Li phase. The phenomenological model was re-cast in a general form and experimental LMR charge profiles were de-convoluted to extract the evolutionary behavior of various components of LMR capacitance profiles. Evolution of the voltage fade component was found to follow a universal growth curve with a maximal voltage fade capacity of ≈ 20% of the initial total capacity.« less

Core competencies in the science and practice of knowledge translation: description of a Canadian strategic training initiative.

PubMed

Straus, Sharon E; Brouwers, Melissa; Johnson, David; Lavis, John N; Légaré, France; Majumdar, Sumit R; McKibbon, K Ann; Sales, Anne E; Stacey, Dawn; Klein, Gail; Grimshaw, Jeremy

2011-12-09

Globally, healthcare systems are attempting to optimize quality of care. This challenge has resulted in the development of implementation science or knowledge translation (KT) and the resulting need to build capacity in both the science and practice of KT. We are attempting to meet these challenges through the creation of a national training initiative in KT. We have identified core competencies in this field and have developed a series of educational courses and materials for three training streams. We report the outline for this approach and the progress to date. We have prepared a strategy to develop, implement, and evaluate a national training initiative to build capacity in the science and practice of KT. Ultimately through this initiative, we hope to meet the capacity demand for KT researchers and practitioners in Canada that will lead to improved care and a strengthened healthcare system.

Core competencies in the science and practice of knowledge translation: description of a Canadian strategic training initiative

PubMed Central

2011-01-01

Background Globally, healthcare systems are attempting to optimize quality of care. This challenge has resulted in the development of implementation science or knowledge translation (KT) and the resulting need to build capacity in both the science and practice of KT. Findings We are attempting to meet these challenges through the creation of a national training initiative in KT. We have identified core competencies in this field and have developed a series of educational courses and materials for three training streams. We report the outline for this approach and the progress to date. Conclusions We have prepared a strategy to develop, implement, and evaluate a national training initiative to build capacity in the science and practice of KT. Ultimately through this initiative, we hope to meet the capacity demand for KT researchers and practitioners in Canada that will lead to improved care and a strengthened healthcare system. PMID:22152223

Increasing Research Capacity in Ontario Child Welfare Organizations: A Unique University-Child Welfare Agency Partnership

ERIC Educational Resources Information Center

Fallon, Barbara; Trocmé, Nico; Van Wert, Melissa; Budau, Krista; Ballantyne, Mary; Lwin, Kristen

2015-01-01

The objective of this article is to describe the successes and challenges of a unique knowledge mobilization initiative that was funded through the Social Sciences and Humanities Research Council of Canada. This initiative focused on promoting knowledge mobilization by increasing the capacity of child welfare organizations in Ontario to conduct…

Building Capacity for Assessment in PISA for Development Countries. PISA for Development Brief 14

ERIC Educational Resources Information Center

OECD Publishing, 2017

2017-01-01

This article explains how the Program for International Student Initiative for Development (PISA-D) initiative aims to make PISA more accessible to middle- and low-income countries. A key component of PISA-D is building capacity in the participating countries for managing large-scale student learning assessments and using the results to support…

Determining Capacity within Systemic Educational Reform.

ERIC Educational Resources Information Center

Century, Jeanne Rose

The idea of "capacity" is particularly important in the reform of educational systems because the system can be both the initiator and the subject of change. In fact, the requirement for capacity is present at all levels of the system in systemic reform. In educational change, four types of capacity are generally considered: (1) human…

Public Sector Reform and Governance for Adaptation: Implications of New Public Management for Adaptive Capacity in Mexico and Norway

NASA Astrophysics Data System (ADS)

Eakin, Hallie; Eriksen, Siri; Eikeland, Per-Ove; Øyen, Cecilie

2011-03-01

Although many governments are assuming the responsibility of initiating adaptation policy in relation to climate change, the compatibility of "governance-for-adaptation" with the current paradigms of public administration has generally been overlooked. Over the last several decades, countries around the globe have embraced variants of the philosophy of administration broadly called "New Public Management" (NPM) in an effort to improve administrative efficiencies and the provision of public services. Using evidence from a case study of reforms in the building sector in Norway, and a case study of water and flood risk management in central Mexico, we analyze the implications of the adoption of the tenets of NPM for adaptive capacity. Our cases illustrate that some of the key attributes associated with governance for adaptation—namely, technical and financial capacities; institutional memory, learning and knowledge; and participation and accountability—have been eroded by NPM reforms. Despite improvements in specific operational tasks of the public sector in each case, we show that the success of NPM reforms presumes the existence of core elements of governance that have often been found lacking, including solid institutional frameworks and accountability. Our analysis illustrates the importance of considering both longer-term adaptive capacities and short-term efficiency goals in public sector administration reform.

Three-Dimensional LiMnPO4·Li3V2(PO4)3/C Nanocomposite as a Bicontinuous Cathode for High-Rate and Long-Life Lithium-Ion Batteries.

PubMed

Luo, Yanzhu; Xu, Xu; Zhang, Yuxiang; Pi, Yuqiang; Yan, Mengyu; Wei, Qiulong; Tian, Xiaocong; Mai, Liqiang

2015-08-12

Olivine-type LiMnPO4 has been extensively studied as a high-energy density cathode material for lithium-ion batteries. To improve both the ionic and electronic conductivities of LiMnPO4, a series of carbon-decorated LiMnPO4·Li3V2(PO4)3 nanocomposites are synthesized by a facile sol-gel method combined with the conventional solid-state method. The optimized composite presents a three-dimensional hierarchical structure with active nanoparticles well-embedded in a conductive carbon matrix. The combination of the nanoscale carbon coating and the microscale carbon network could provide a more active site for electrochemical reaction, as well as a highly conductive network for both electron and lithium-ion transportation. When cycled at 20 C, an initial specific capacity of 103 mA h g(-1) can be obtained and the capacity retention reaches 68% after 3000 cycles, corresponding to a capacity fading of 0.013% per cycle. The stable capacity and excellent rate capability make this carbon-decorated LiMnPO4·Li3V2(PO4)3 nanocomposite a promising cathode for lithium-ion batteries.

Public sector reform and governance for adaptation: implications of new public management for adaptive capacity in Mexico and Norway.

PubMed

Eakin, Hallie; Eriksen, Siri; Eikeland, Per-Ove; Øyen, Cecilie

2011-03-01

Although many governments are assuming the responsibility of initiating adaptation policy in relation to climate change, the compatibility of "governance-for-adaptation" with the current paradigms of public administration has generally been overlooked. Over the last several decades, countries around the globe have embraced variants of the philosophy of administration broadly called "New Public Management" (NPM) in an effort to improve administrative efficiencies and the provision of public services. Using evidence from a case study of reforms in the building sector in Norway, and a case study of water and flood risk management in central Mexico, we analyze the implications of the adoption of the tenets of NPM for adaptive capacity. Our cases illustrate that some of the key attributes associated with governance for adaptation--namely, technical and financial capacities; institutional memory, learning and knowledge; and participation and accountability--have been eroded by NPM reforms. Despite improvements in specific operational tasks of the public sector in each case, we show that the success of NPM reforms presumes the existence of core elements of governance that have often been found lacking, including solid institutional frameworks and accountability. Our analysis illustrates the importance of considering both longer-term adaptive capacities and short-term efficiency goals in public sector administration reform.

DTT-doped MWCNT coating for checking shuttle effect of lithium-sulfur battery

NASA Astrophysics Data System (ADS)

Xiaogang, Sun; Jie, Wang; Xu, Li; Wei, Chen

2018-01-01

In order to improve the rate and reversible capacity of lithium-sulfur (Li-S) battery, a reagent of dithiothreitol (DTT) was utilized to check the dissolution and shuttle of long-chain lithium polysulfides (LiPSs) by cutting the disulfide bond (-S-S- bonds) in them. The slurry of DTT-doped multi-walled carbon nanotubes (MWCNTs) was coated on the surface of sulfur cathode as a shield to slice the long-chain LiPSs to short-chain ones for checking the dissolution and migration of LiPSs to lithium anode. The morphology and structure of the electrodes were observed by scanning electron microscopy (SEM). The electrochemical performance was tested by galvanostatic charge-discharge, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The initial discharge capacity of S-DTT- carbon nanotube paper (CNTP) electrode reached 1670 and 949 mAh/g at 0.05 and 2 C respectively with a coulombic efficiency of over 99%. The electrode maintained a reversible specific capacity of 949 mAh/g after 45 cycles at 2 C. This suggested that the DTT-doped MWCNT coating can restrain shuttle effect and improve the rate and capacity of Li-S battery. The S-DTT-CNTP electrode not only accommodates the volume expansion but also provides stable electronics and ions channels.

Enhancing the spatial coverage of a regional high-quality hydraulic conductivity dataset with estimates made from domestic water-well specific-capacity tests

NASA Astrophysics Data System (ADS)

Priebe, Elizabeth H.; Neville, C. J.; Rudolph, D. L.

2018-03-01

The spatial coverage of hydraulic conductivity ( K) values for large-scale groundwater investigations is often poor because of the high costs associated with hydraulic testing and the large areas under investigation. Domestic water wells are ubiquitous and their well logs represent an untapped resource of information that includes mandatory specific-capacity tests, from which K can be estimated. These specific-capacity tests are routinely conducted at such low pumping rates that well losses are normally insignificant. In this study, a simple and practical approach to augmenting high-quality K values with reconnaissance-level K values from water-well specific-capacity tests is assessed. The integration of lesser quality K values from specific-capacity tests with a high-quality K data set is assessed through comparisons at two different scales: study-area-wide (a 600-km2 area in Ontario, Canada) and in a single geological formation within a portion of the broader study area (200 km2). Results of the comparisons demonstrate that reconnaissance-level K estimates from specific-capacity tests approximate the ranges and distributions of the high-quality K values. Sufficient detail about the physical basis and assumptions that are invoked in the development of the approach are presented here so that it can be applied with confidence by practitioners seeking to enhance their spatial coverage of K values with specific-capacity tests.

Rice husk-originating silicon-graphite composites for advanced lithium ion battery anodes.

PubMed

Kim, Hye Jin; Choi, Jin Hyeok; Choi, Jang Wook

2017-01-01

Rice husk is produced in a massive amount worldwide as a byproduct of rice cultivation. Rice husk contains approximately 20 wt% of mesoporous SiO 2 . We produce mesoporous silicon (Si) by reducing the rice husk-originating SiO 2 using a magnesio-milling process. Taking advantage of meso-porosity and large available quantity, we apply rice husk-originating Si to lithium ion battery anodes in a composite form with commercial graphite. By varying the mass ratio between these two components, trade-off relation between specific capacity and cycle life was observed. A controllable pre-lithiation scheme was adopted to increase the initial Coulombic efficiency and energy density. The series of electrochemical results suggest that rice husk-originating Si-graphite composites are promising candidates for high capacity lithium ion battery anodes, with the prominent advantages in battery performance and scalability.

A practical implementation science heuristic for organizational readiness: R = MC2

PubMed Central

Cook, Brittany S.; Lamont, Andrea; Wandersman, Abraham; Castellow, Jennifer; Katz, Jason; Beidas, Rinad S.

2015-01-01

There are many challenges when an innovation (i.e., a program, process, or policy that is new to an organization) is actively introduced into an organization. One critical component for successful implementation is the organization’s readiness for the innovation. In this article, we propose a practical implementation science heuristic, abbreviated as R= MC2. We propose that organizational readiness involves: 1) the motivation to implement an innovation, 2) the general capacities of an organization, and 3) the innovation-specific capacities needed for a particular innovation. Each of these components can be assessed independently and be used formatively. The heuristic can be used by organizations to assess readiness to implement and by training and technical assistance providers to help build organizational readiness. We present an illustration of the heuristic by showing how behavioral health organizations differ in readiness to implement a peer specialist initiative. Implications for research and practice of organizational readiness are discussed. PMID:26668443

The effects of exercise-based rehabilitation on balance and gait for stroke patients: a systematic review.

PubMed

An, Minjeong; Shaughnessy, Marianne

2011-12-01

This review evaluated the effects of balance and/or gait exercise interventions for stroke survivors and summarized the available evidence on these exercise interventions. A search for studies published between January 2001 and January 2010 was performed using the keywords stroke, walking or balance, and physical activity or exercise. Seventeen randomized clinical trials were identified. The findings suggest that initiating early rehabilitation during acute to subacute stroke recovery can improve balance and walking capacity. The findings also demonstrate that at least 1 hour, three to five times per week, of balance training and 30 minutes, three to five times per week, of gait-oriented exercise are effective to improve balance and walking. This review confirms that balance and walking capacity are improved with specific exercise modalities. A combination of balance, gait, and aerobic exercises would be ideal.

An advanced lithium-ion battery based on a graphene anode and a lithium iron phosphate cathode.

PubMed

Hassoun, Jusef; Bonaccorso, Francesco; Agostini, Marco; Angelucci, Marco; Betti, Maria Grazia; Cingolani, Roberto; Gemmi, Mauro; Mariani, Carlo; Panero, Stefania; Pellegrini, Vittorio; Scrosati, Bruno

2014-08-13

We report an advanced lithium-ion battery based on a graphene ink anode and a lithium iron phosphate cathode. By carefully balancing the cell composition and suppressing the initial irreversible capacity of the anode in the round of few cycles, we demonstrate an optimal battery performance in terms of specific capacity, that is, 165 mAhg(-1), of an estimated energy density of about 190 Wh kg(-1) and a stable operation for over 80 charge-discharge cycles. The components of the battery are low cost and potentially scalable. To the best of our knowledge, complete, graphene-based, lithium ion batteries having performances comparable with those offered by the present technology are rarely reported; hence, we believe that the results disclosed in this work may open up new opportunities for exploiting graphene in the lithium-ion battery science and development.

Financial and testamentary capacity evaluations: procedures and assessment instruments underneath a functional approach.

PubMed

Sousa, Liliana B; Simões, Mário R; Firmino, Horácio; Peisah, Carmelle

2014-02-01

Mental health professionals are frequently involved in mental capacity determinations. However, there is a lack of specific measures and well-defined procedures for these evaluations. The main purpose of this paper is to provide a review of financial and testamentary capacity evaluation procedures, including not only the traditional neuropsychological and functional assessment but also the more recently developed forensic assessment instruments (FAIs), which have been developed to provide a specialized answer to legal systems regarding civil competencies. Here the main guidelines, papers, and other references are reviewed in order to achieve a complete and comprehensive selection of instruments used in the assessment of financial and testamentary capacity. Although some specific measures for financial abilities have been developed recently, the same is not true for testamentary capacity. Here are presented several instruments or methodologies for assessing financial and testamentary capacity, including neuropsychological assessment, functional assessment scales, performance based functional assessment instruments, and specific FAIs. FAIs are the only specific instruments intended to provide a specific and direct answer to the assessment of financial capacity based on legal systems. Considering the need to move from a diagnostic to a functional approach in financial and testamentary capacity evaluations, it is essential to consider both general functional examination as well as cognitive functioning.

Capacity-building of the allied health workforce to prevent and control diabetes: Lessons learnt from the National Initiative to Reinforce and Organize General Diabetes Care in Sri Lanka (NIROGI Lanka) project.

PubMed

Wijeyaratne, Chandrika; Arambepola, Carukshi; Karunapema, Palitha; Periyasamy, Kayathri; Hemachandra, Nilmini; Ponnamperuma, Gominda; Beneragama, Hemantha; de Alwis, Sunil

2016-04-01

In 2008, to tackle the exponential rise in the clinical burden of diabetes that was challenging the health systems in Sri Lanka, a shift in focus towards patient-centred care linked with community health promotion was initiated by the National Initiative to Reinforce and Organize General Diabetes Care in Sri Lanka (NIROGI Lanka) project of the Sri Lanka Medical Association. Specific training of "diabetes educator nursing officers" (DENOs), field staff in maternal and child health, footwear technicians, and health promoters from the community, was instituted to improve knowledge, skills and attitudes in the area of control and prevention of diabetes. This article highlights some of the activities carried out to date with the allied health workforce and volunteer community. Specifically, it describes experiences with the DENO programme: the educational and administrative processes adopted, challenges faced and lessons learnt. It also highlights an approach to prevention and management of complications of chronic diabetic foot through training a cohort of prosthetics and orthotics technicians, in the absence of podiatrists, and an initiative to provide low-cost protective footwear. Harnessing the enthusiasm of volunteers - adults and schoolchildren - to address behavioural risk factors in a culturally appropriate fashion has also been a key part of the NIROGI Lanka strategy.

[Assessment of capacity for logisty, public education, and training in public health emergency management in China].

PubMed

Hu, Guo-qing; Rao, Ke-qin; Sun, Zhen-qiu; Yu, Ren-he

2008-10-01

To assess the capacity for logistics, public education, and training in managing public health emergency in China at present. Four provinces were selected using stratified sampling. All the municipalities of these 4 provinces were assessed using the 9th and 10th subscales (logistics, public education and training) of Preparedness and response capacity questionnaire for public health emergencies for provincial or municipal governments developed by the Center for Health Statistics and Information, Ministry of Health of China. Sixty of the 66 questionnaires (90.91%) were collected. Among the 60 investigated municipalities, 80% established a specific agency to take charge of emergency material storage, management and allocation, 65% developed standard for material storage, 35% developed standard of places for material storage, 25% built regulation for testing, maintaining, and updating the emergency materials regularly, 45% arranged budget for routine payment, 27% established standard of emergency fund, and 28% set up the procedure to initiate emergency fund. The average of standard score of subscale 9 was 43.33 (95% confidence interval, 35.65~51.01). 25% of the 60 municipalities conducted assessment for training in the past 2 years, 53% developed plan for emergency personnel training, 20% developed effectiveness assessment regulation of emergency personnel training, 80% assigned a specific agency to be responsible for public education, and 23% established regulation for public education. The average of standard score of subscale 10 was 47.43 (95% confidence interval, 40.69~54.17). Serious problems are found in logistics, public education, and training for public health emergency management in China. Measures should be taken immediately by the central and local government to improve these capacities.

Understanding MHC Class I Presentation of Viral Antigens by Human Dendritic Cells as a Basis for Rational Design of Therapeutic Vaccines

PubMed Central

van Montfoort, Nadine; van der Aa, Evelyn; Woltman, Andrea M.

2014-01-01

Effective viral clearance requires the induction of virus-specific CD8+ cytotoxic T lymphocytes (CTL). Since dendritic cells (DC) have a central role in initiating and shaping virus-specific CTL responses, it is important to understand how DC initiate virus-specific CTL responses. Some viruses can directly infect DC, which theoretically allow direct presentation of viral antigens to CTL, but many viruses target other cells than DC and thus the host depends on the cross-presentation of viral antigens by DC to activate virus-specific CTL. Research in mouse models has highly enhanced our understanding of the mechanisms underlying cross-presentation and the dendritic cells (DC) subsets involved, however, these results cannot be readily translated toward the role of human DC in MHC class I-antigen presentation of human viruses. Here, we summarize the insights gained in the past 20 years on MHC class I presentation of viral antigen by human DC and add to the current debate on the capacities of different human DC subsets herein. Furthermore, possible sources of viral antigens and essential DC characteristics for effective induction of virus-specific CTL are evaluated. We conclude that cross-presentation is not only an efficient mechanism exploited by DC to initiate immunity to viruses that do not infect DC but also to viruses that do infect DC, because cross-presentation has many conceptual advantages and bypasses direct immune modulatory effects of the virus on its infected target cells. Since knowledge on the mechanism of viral antigen presentation and the preferred DC subsets is crucial for rational vaccine design, the obtained insights are very instrumental for the development of effective anti-viral immunotherapy. PMID:24795724

High-energy lithium-ion hybrid supercapacitors composed of hierarchical urchin-like WO3/C anodes and MOF-derived polyhedral hollow carbon cathodes.

PubMed

Xu, Juan; Li, Yuanyuan; Wang, Lei; Cai, Qifa; Li, Qingwei; Gao, Biao; Zhang, Xuming; Huo, Kaifu; Chu, Paul K

2016-09-22

A lithium-ion hybrid supercapacitor (Li-HSC) comprising a Li-ion battery type anode and an electrochemical double layer capacitance (EDLC) type cathode has attracted much interest because it accomplishes a large energy density without compromising the power density. In this work, hierarchical carbon coated WO 3 (WO 3 /C) with a unique mesoporous structure and metal-organic framework derived nitrogen-doped carbon hollow polyhedra (MOF-NC) are prepared and adopted as the anode and the cathode for Li-HSCs. The hierarchical mesoporous WO 3 /C microspheres assembled by radially oriented WO 3 /C nanorods along the (001) plane enable effective Li + insertion, thus exhibit high capacity, excellent rate performance and a long cycling life due to their high Li + conductivity, electronic conductivity and structural robustness. The WO 3 /C structure shows a reversible specific capacity of 508 mA h g -1 at a 0.1 C rate (1 C = 696 mA h g -1 ) after 160 discharging-charging cycles with excellent rate capability. The MOF-NC achieved the specific capacity of 269.9 F g -1 at a current density of 0.2 A g -1 . At a high current density of 6 A g -1 , 92.4% of the initial capacity could be retained after 2000 discharging-charging cycles, suggesting excellent cycle stability. The Li-HSC comprising a WO 3 /C anode and a MOF-NC cathode boasts a large energy density of 159.97 W h kg -1 at a power density of 173.6 W kg -1 and 88.3% of the capacity is retained at a current density of 5 A g -1 after 3000 charging-discharging cycles, which are better than those previously reported for Li-HSCs. The high energy and power densities of the Li-HSCs of WO 3 /C//MOF-NC render large potential in energy storage.

Building capacity for tobacco control research and policy

PubMed Central

Stillman, F; Yang, G; Figueiredo, V; Hernandez‐Avila, M; Samet, J

2006-01-01

The Fogarty International Center (FIC) initiative, “International Tobacco and Health Research Capacity Building Program” represents an important step in US government funding for global tobacco control. Low‐ and middle‐income countries of the world face a rising threat to public health from the rapidly escalating epidemic of tobacco use. Many are now parties to the Framework Convention on Tobacco Control (FCTC) and capacity development to meet FCTC provisions. One initial grant provided through the FIC was to the Institute for Global Tobacco Control (IGTC) at the Johns Hopkins Bloomberg School of Public Health (JHSPH) to support capacity building and research programmes in China, Brazil, and Mexico. The initiative's capacity building effort focused on: (1) building the evidence base for tobacco control, (2) expanding the infrastructure of each country to deliver tobacco control, and (3) developing the next generation of leaders as well as encouraging networking throughout the country and with neighbouring countries. This paper describes the approach taken and the research foci, as well some of the main outcomes and some identified challenges posed by the effort. Individual research papers are in progress to provide more in‐depth reporting of study results. PMID:16723670

A facile method of preparing LiMnPO4/reduced graphene oxide aerogel as cathodic material for aqueous lithium-ion hybrid supercapacitors

NASA Astrophysics Data System (ADS)

Xu, Lin; Wang, Senlin; Zhang, Xiao; He, Taobin; Lu, Fengxia; Li, Huichang; Ye, Junhui

2018-01-01

A facile method of preparing LiMnPO4/reduced graphene oxide aerogel (LMP/rGO) as cathodic material was reported here. LiMnPO4 nano-particles were prepared using a facile polyvinyl pyrrolidone-assisted solvothermal route. Then LMP/rGO aerogel was prepared using the accessible restacking method. The influence of the cathodic electrode composition (ratio of rGO to LiMnPO4) on the performance of the LMP/rGO was evaluated by constant-current discharge tests. When compared with 217C g-1 for the pristine LMP, the best LMP/rGO (the content of rGO is 27.3 wt%) exhibits a higher capacity of 464.5C g-1 (at 0.5 A g-1), which presenting the capacity enhance of 114%. Moreover, a lithium-ion hybrid supercapacitor (LIHS) was successfully assembled by using LMP/rGO aerogel as the cathodic electrode and rGO aerogel as the anodic electrode. The LMP/rGO//rGO device achieves excellent specific energy of 16.46 W h kg-1 at a power density of 0.38 kW kg-1, even under the higher specific power of 4.52 kW kg-1, there still holds the specific energy of 11.79 W h kg-1. The LMP/rGO//rGO device maintains 91.2% of the initial capacity after 10,000 cycles (at 2 A g-1), which displays high rate performance and long cycle life. The 3D LMP/rGO aerogel could be a promising candidate material for the lithium-ion hybrid supercapacitors.

H-2 compatibility requirement for virus-specific T-cell-mediated cytolysis. Evaluation of the role of H-2I region and non-H-2 genes in regulating immune response

PubMed Central

1976-01-01

Lymphocytic choriomeningitis virus (LCMV) and ectromelia virus-specific T-cell-mediated cytotoxicity was assayed in various strain combinations using as targets peritoneal macrophages which have been shown to express Ia antigens. Virus-specific cytotoxicity was found only in H-2K- or D-region compatible combinations. I-region compatibility was not necessary nor alone sufficient for lysis. Six different I-region specificities had no obvious effect on the capacity to generate in vivo specific cytotoxicity (expressed in vitro) associated with Dd. Low LCMV- specific cytotoxic activity generated in DBA/2 mice was caused by the non-H-2 genetic background. This trait was inversely related to the infectious virus dose and recessive. Non-H-2 genes, possibly involved in controlling initial spread and multiplication of virus, seem to be, at least in the examples tested, more important in determining virus- specific cytotoxic T-cell activity in spleens than are Ir genes coded in H-2. PMID:1085331

Regionalization as an approach to regulatory systems strengthening: a case study in CARICOM member states.

PubMed

Preston, Charles; Chahal, Harinder S; Porrás, Analia; Cargill, Lucette; Hinds, Maryam; Olowokure, Babatunde; Cummings, Rudolph; Hospedales, James

2016-05-01

Improving basic capacities for regulation of medicines and health technologies through regulatory systems strengthening is particularly challenging in resource-constrained settings. "Regionalization"-an approach in which countries with common histories, cultural values, languages, and economic conditions work together to establish more efficient systems-may be one answer. This report describes the Caribbean Regulatory System (CRS), a regionalization initiative being implemented in the mostly small countries of the Caribbean Community and Common Market (CARICOM). This initiative is an innovative effort to strengthen regulatory systems in the Caribbean, where capacity is limited compared to other subregions of the Americas. The initiative's concept and design includes a number of features and steps intended to enhance sustainability in resource-constrained contexts. The latter include 1) leveraging existing platforms for centralized cooperation, governance, and infrastructure; 2) strengthening regulatory capacities with the largest potential public health impact; 3) incorporating policies that promote reliance on reference authorities; 4) changing the system to encourage industry to market their products in CARICOM (e.g., using a centralized portal of entry to reduce regulatory burdens); and 5) building human resource capacity. If implemented properly, the CRS will be self-sustaining through user fees. The experience and lessons learned thus far in implementing this initiative, described in this report, can serve as a case study for the development of similar regulatory strengthening initiatives in resource-constrained environments.

Effect of initiator concentration to low-density polyethylene production in a tubular reactor

NASA Astrophysics Data System (ADS)

Azmi, A.; Aziz, N.

2016-11-01

Low-density polyethylene (LDPE) is one of the most widely used polymers in the world, which is produced in high-capacity tubular and autoclave reactors. As the LDPE industry turn into more competitive and its market profit margins become tighter, manufacturers have to develop solutions to debottleneck the reactor output while abiding to the stringent product specification. A single polyolefin plant producing ten to forty grades of LDPE with various melt flow index (MFI), therefore understanding the reaction mechanism, the operating conditions as well as the dynamic behavior of tubular reactor is essential before any improvement can take place. In the present work, a steady state mathematical model representing a tubular reactor for the production of LDPE is simulated using MATLAB R2015a®. The model developed is a function of feed inlet, reactor jacket, single initiator injector and outlet stream. Analysis on the effect of initiator concentration (CI) shows sudden declining trend of initiator's concentration which indicates that all of the initiators are exhausted after polymerization reaction and no further reaction occur from this point onwards. Furthermore, the results demonstrate that the concentration of initiator gives significant impact on reactor temperature's profile and monomer conversion rate, since higher initiator concentration promotes greater polymerization rate, and therefore leads to higher monomer conversion throughput.

Are there intergenerational and population-specific effects of oxidative stress in sockeye salmon (Oncorhynchus nerka)?

PubMed

Taylor, Jessica J; Wilson, Samantha M; Sopinka, Natalie M; Hinch, Scott G; Patterson, David A; Cooke, Steven J; Willmore, William G

2015-06-01

Intergenerational effects of stress have been reported in a wide range of taxa; however, few researchers have examined the intergenerational consequences of oxidative stress. Oxidative stress occurs in living organisms when reactive oxygen species remain unquenched by antioxidant defense systems and become detrimental to cells. In fish, it is unknown how maternal oxidative stress and antioxidant capacity influence offspring quality. The semelparous, migratory life history of Pacific salmon (Oncorhynchus spp.) provides a unique opportunity to explore intergenerational effects of oxidative stress. This study examined the effects of population origin on maternal and developing offspring oxidative stress and antioxidant capacity, and elucidated intergenerational relationships among populations of sockeye salmon (Oncorhynchus nerka) with varying migration effort. For three geographically distinct populations of Fraser River sockeye salmon (British Columbia, Canada), antioxidant capacity and oxidative stress were measured in adult female plasma, heart, brain, and liver, as well as in developing offspring until time of emergence. Maternal and offspring oxidative stress and antioxidant capacity varied among populations but patterns were not consistent across tissue/developmental stage. Furthermore, maternal oxidative stress and antioxidant capacity did not affect offspring oxidative stress and antioxidant capacity across any of the developmental stages or populations sampled. Our results revealed that offspring develop their endogenous antioxidant systems at varying rates across populations; however, this variability is overcome by the time of emergence. While offspring may be relying on maternally derived antioxidants in the initial stages of development, they rapidly develop their own antioxidant systems (mainly glutathione) during later stages of development. Copyright © 2015 Elsevier Inc. All rights reserved.

Dynamic range in the C. elegans brain network

NASA Astrophysics Data System (ADS)

Antonopoulos, Chris G.

2016-01-01

We study external electrical perturbations and their responses in the brain dynamic network of the Caenorhabditis elegans soil worm, given by the connectome of its large somatic nervous system. Our analysis is inspired by a realistic experiment where one stimulates externally specific parts of the brain and studies the persistent neural activity triggered in other cortical regions. In this work, we perturb groups of neurons that form communities, identified by the walktrap community detection method, by trains of stereotypical electrical Poissonian impulses and study the propagation of neural activity to other communities by measuring the corresponding dynamic ranges and Steven law exponents. We show that when one perturbs specific communities, keeping the rest unperturbed, the external stimulations are able to propagate to some of them but not to all. There are also perturbations that do not trigger any response. We found that this depends on the initially perturbed community. Finally, we relate our findings for the former cases with low neural synchronization, self-criticality, and large information flow capacity, and interpret them as the ability of the brain network to respond to external perturbations when it works at criticality and its information flow capacity becomes maximal.

Factors influencing research engagement: research interest, confidence and experience in an Australian speech-language pathology workforce.

PubMed

Finch, Emma; Cornwell, Petrea; Ward, Elizabeth C; McPhail, Steven M

2013-04-19

Recent initiatives within an Australia public healthcare service have seen a focus on increasing the research capacity of their workforce. One of the key initiatives involves encouraging clinicians to be research generators rather than solely research consumers. As a result, baseline data of current research capacity are essential to determine whether initiatives encouraging clinicians to undertake research have been effective. Speech pathologists have previously been shown to be interested in conducting research within their clinical role; therefore they are well positioned to benefit from such initiatives. The present study examined the current research interest, confidence and experience of speech language pathologists (SLPs) in a public healthcare workforce, as well as factors that predicted clinician research engagement. Data were collected via an online survey emailed to an estimated 330 SLPs working within Queensland, Australia. The survey consisted of 30 questions relating to current levels of interest, confidence and experience performing specific research tasks, as well as how frequently SLPs had performed these tasks in the last 5 years. Although 158 SLPs responded to the survey, complete data were available for only 137. Respondents were more confident and experienced with basic research tasks (e.g., finding literature) and less confident and experienced with complex research tasks (e.g., analysing and interpreting results, publishing results). For most tasks, SLPs displayed higher levels of interest in the task than confidence and experience. Research engagement was predicted by highest qualification obtained, current job classification level and overall interest in research. Respondents generally reported levels of interest in research higher than their confidence and experience, with many respondents reporting limited experience in most research tasks. Therefore SLPs have potential to benefit from research capacity building activities to increase their research skills in order to meet organisational research engagement objectives. However, these findings must be interpreted with the caveats that a relatively low response rate occurred and participants were recruited from a single state-wide health service, and therefore may not be representative of the wider SLP workforce.

Biomass derived nitrogen-doped hierarchical porous carbon sheets for supercapacitors with high performance.

PubMed

Wang, Cunjing; Wu, Dapeng; Wang, Hongju; Gao, Zhiyong; Xu, Fang; Jiang, Kai

2018-08-01

A facile potassium chloride salt-locking technique combined with hydrothermal treatment on precursors was explored to prepare nitrogen-doped hierarchical porous carbon sheets in air from biomass. Benefiting from the effective synthesis strategy, the as-obtained carbon possesses a unique nitrogen-doped thin carbon sheet structure with abundant hierarchical pores and large specific surface areas of 1459 m 2  g -1 . The doped nitrogen in carbon framework has a positive effect on the electrochemical properties of the electrode material, the thin carbon sheet structure benefits for fast ion transfer, the abundant meso-pores provide convenient channels for rapid charge transportation, large specific surface area and lots of micro-pores guarantee sufficient ion-storage sites. Therefore, applied for supercapacitors, the carbon electrode material exhibits an outstanding specific capacitance of 451 F g -1 at 0.5 A g -1 in a three-electrode system. Moreover, the assembled symmetric supercapacitor based on two identical carbon electrodes also displays high specific capacitance of 309 F g -1 at 0.5 A g -1 , excellent rate capacity and remarkable cycling stability with 99.3% of the initial capacitance retention after 10,000 cycles at 5 A -1 . The synthesis strategy avoids expensive inert gas protection and the use of corrosive KOH and toxic ZnCl 2 activated reagents, representing a promising green route to design advanced carbon electrode materials from biomass for high-capacity supercapacitors. Copyright © 2018. Published by Elsevier Inc.

Synthesis and Characterization of Modified BiOCl and Their Application in Adsorption of Low-Concentration Dyes from Aqueous Solution

NASA Astrophysics Data System (ADS)

Zhao, Qihang; Xing, Yongxing; Liu, Zhiliang; Ouyang, Jing; Du, Chunfang

2018-03-01

The synthesis and characterization of BiOCl and Fe3+-grafted BiOCl (Fe/BiOCl) is reported that are developed as efficient adsorbents for the removal of cationic dyes rhodamine B (RhB) and methylene blue (MB) as well as anionic dyes methyl orange (MO) and acid orange (AO) from aqueous solutions with low concentration of 0.01 0.04 mmol/L. Characterizations by various techniques indicate that Fe3+ grafting induced more open porous structure and higher specific surface area. Both BiOCl and Fe/BiOCl with negatively charged surfaces showed excellent adsorption efficiency toward cationic dyes, which could sharply reach 99.6 and nearly 100% within 3 min on BiOCl and 97.0 and 98.0% within 10 min on Fe/BiOCl for removing RhB and MB, respectively. However, Fe/BiOCl showed higher adsorption capacity than BiOCl toward ionic dyes. The influence of initial dye concentration, temperature, and pH value on the adsorption capacity is comprehensively studied. The adsorption process of RhB conforms to Langmuir adsorption isotherm and pseudo-second-order kinetic feature. The excellent adsorption capacities of as-prepared adsorbents toward cationic dyes are rationalized on the basis of electrostatic attraction as well as open porous structure and high specific surface area. In comparison with Fe/BiOCl, BiOCl displays higher selective efficiency toward cationic dyes in mixed dye solutions.

Tailored synthesis of monodispersed nano/submicron porous silicon oxycarbide (SiOC) spheres with improved Li-storage performance as an anode material for Li-ion batteries

NASA Astrophysics Data System (ADS)

Shi, Huimin; Yuan, Anbao; Xu, Jiaqiang

2017-10-01

A spherical silicon oxycarbide (SiOC) material (monodispersed nano/submicron porous SiOC spheres) is successfully synthesized via a specially designed synthetic strategy involving pyrolysis of phenyltriethoxysilane derived pre-ceramic polymer spheres at 900 °C. In order to prevent sintering of the pre-ceramic polymer spheres upon heating, a given amount of hollow porous SiO2 nanobelts which are separately prepared from tetraethyl orthosilicate with CuO nanobelts as templates are introduced into the pre-ceramic polymer spheres before pyrolysis. This material is investigated as an anode for lithium-ion batteries in comparison with the large-size bulk SiOC material synthesized under the similar conditions but without hollow SiO2 nanobelts. The maximum reversible specific capacity of ca. 900 mAh g-1 is delivered at the current density of 100 mA g-1 and ca. 98% of the initial capacity is remained after 100 cycles at 100 mA g-1 for the SiOC spheres material, which are much superior to the bulk SiOC material. The improved lithium storage performance in terms of specific capacity and cyclability is attributed to its particular morphology of monodisperse nano/submicron porous spheres as well as its modified composition and microstructure. This SiOC material has higher Li-storage activity and better stability against volume expansion during repeated lithiation and delithiation cycling.

Structural Dependence of the Sulfur Reduction Mechanism in Carbon-Based Cathodes for Lithium–Sulfur Batteries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burgos, Juan C.; Balbuena, Perla B.; Montoya, Javier A.

We report lithium-sulfur batteries are promising non-conventional sources of energy due to their high theoretical capacity and energy density. However, the successful implementation of this technology has been hindered due to the low cycling life of the battery, caused by long chain polysulfide shuttling between electrodes during charge/discharge, among other issues. Quantum chemical calculations are used to study the reactivity of sulfur in the porous cathode of lithium-sulfur batteries, and the retention capabilities of porous carbon materials to avoid long chain polysulfide diffusion. Ab initio molecular dynamics (AIMD) simulations are initially employed to evaluate sulfur reduction mechanisms and kinetics, andmore » to identify main reduction products. A porous cathode architecture is modeled through parallel graphene layers with elemental sulfur rings in the interlayer, and filled with 1,3-dioxolane (DOL) organic solvent and lithium ions. AIMD simulations showed fast reduction of elemental sulfur and formation of short chain polysulfide. Furthermore, the effect of dangling carbon bonds of graphene on the reactivity of the cathode was confirmed. Adsorption calculations through density functional theory (DFT) proved the capacity of small pores to retain long polysulfide chains. An analysis of the effect of the specific current on the chemical behavior of sulfur reveals an influence of current on the amount of sulfur utilization and practical specific capacity of the battery. In conclusion, this work illustrates the physical-chemical behavior of the sulfur/polysulfide in the porous cathode system at atomistic level.« less

Structural Dependence of the Sulfur Reduction Mechanism in Carbon-Based Cathodes for Lithium–Sulfur Batteries

DOE PAGES

Burgos, Juan C.; Balbuena, Perla B.; Montoya, Javier A.

2017-08-17

We report lithium-sulfur batteries are promising non-conventional sources of energy due to their high theoretical capacity and energy density. However, the successful implementation of this technology has been hindered due to the low cycling life of the battery, caused by long chain polysulfide shuttling between electrodes during charge/discharge, among other issues. Quantum chemical calculations are used to study the reactivity of sulfur in the porous cathode of lithium-sulfur batteries, and the retention capabilities of porous carbon materials to avoid long chain polysulfide diffusion. Ab initio molecular dynamics (AIMD) simulations are initially employed to evaluate sulfur reduction mechanisms and kinetics, andmore » to identify main reduction products. A porous cathode architecture is modeled through parallel graphene layers with elemental sulfur rings in the interlayer, and filled with 1,3-dioxolane (DOL) organic solvent and lithium ions. AIMD simulations showed fast reduction of elemental sulfur and formation of short chain polysulfide. Furthermore, the effect of dangling carbon bonds of graphene on the reactivity of the cathode was confirmed. Adsorption calculations through density functional theory (DFT) proved the capacity of small pores to retain long polysulfide chains. An analysis of the effect of the specific current on the chemical behavior of sulfur reveals an influence of current on the amount of sulfur utilization and practical specific capacity of the battery. In conclusion, this work illustrates the physical-chemical behavior of the sulfur/polysulfide in the porous cathode system at atomistic level.« less

Effect of high energy electron beam (10MeV) on specific heat capacity of low-density polyethylene/hydroxyapatite nano-composite.

PubMed

Soltani, Z; Ziaie, F; Ghaffari, M; Beigzadeh, A M

2017-02-01

In the present work, thermal properties of low density polyethylene (LDPE) and its nano composites are investigated. For this purpose LDPE reinforced with different weight percents of hydroxyapatite (HAP) powder which was synthesized via hydrolysis method are produced. The samples were irradiated with 10MeV electron beam at doses of 75 to 250kGy. Specific heat capacity measurement have been carried out at different temperatures, i.e. 25, 50, 75 and 100°C using modulated temperature differential scanning calorimetry (MTDSC) apparatus and the effect of three parameters include of temperature, irradiation dose and the amount of HAP nano particles as additives on the specific heat capacity of PE/HAP have been investigated precisely. The MTDSC results indicate that the specific heat capacity have decreased by addition of nano sized HAP as reinforcement for LDPE. On the other hand, the effect of radiation dose is reduction in the specific heat capacity in all materials including LDPE and its nano composites. The HAP nano particles along with cross-link junctions due to radiation restrain the movement of the polymer chains in the vicinity of each particle and improve the immobility of polymer chains and consequently lead to reduction in specific heat capacity. Also, the obtained results confirm that the radiation effect on the specific heat capacity is more efficient than the reinforcing effect of nano-sized hydroxyapatite. Copyright © 2016 Elsevier B.V. All rights reserved.

Restoration of Muscle Glycogen and Functional Capacity: Role of Post-Exercise Carbohydrate and Protein Co-Ingestion

PubMed Central

Alghannam, Abdullah F.; Betts, James A.

2018-01-01

The importance of post-exercise recovery nutrition has been well described in recent years, leading to its incorporation as an integral part of training regimes in both athletes and active individuals. Muscle glycogen depletion during an initial prolonged exercise bout is a main factor in the onset of fatigue and so the replenishment of glycogen stores may be important for recovery of functional capacity. Nevertheless, nutritional considerations for optimal short-term (3–6 h) recovery remain incompletely elucidated, particularly surrounding the precise amount of specific types of nutrients required. Current nutritional guidelines to maximise muscle glycogen availability within limited recovery are provided under the assumption that similar fatigue mechanisms (i.e., muscle glycogen depletion) are involved during a repeated exercise bout. Indeed, recent data support the notion that muscle glycogen availability is a determinant of subsequent endurance capacity following limited recovery. Thus, carbohydrate ingestion can be utilised to influence the restoration of endurance capacity following exhaustive exercise. One strategy with the potential to accelerate muscle glycogen resynthesis and/or functional capacity beyond merely ingesting adequate carbohydrate is the co-ingestion of added protein. While numerous studies have been instigated, a consensus that is related to the influence of carbohydrate-protein ingestion in maximising muscle glycogen during short-term recovery and repeated exercise capacity has not been established. When considered collectively, carbohydrate intake during limited recovery appears to primarily determine muscle glycogen resynthesis and repeated exercise capacity. Thus, when the goal is to optimise repeated exercise capacity following short-term recovery, ingesting carbohydrate at an amount of ≥1.2 g kg body mass−1·h−1 can maximise muscle glycogen repletion. The addition of protein to carbohydrate during post-exercise recovery may be beneficial under circumstances when carbohydrate ingestion is sub-optimal (≤0.8 g kg body mass−1·h−1) for effective restoration of muscle glycogen and repeated exercise capacity. PMID:29473893

49 CFR 179.220-16 - Expansion capacity.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Non-Pressure Tank Car Tanks (Classes DOT-111AW and 115AW) § 179.220-16 Expansion capacity. Expansion capacity...

A Hybrid Backward-Forward Iterative Model for Improving Capacity Building of Earth Observations for Sustainable Societal Application

NASA Astrophysics Data System (ADS)

Hossain, F.; Iqbal, N.; Lee, H.; Muhammad, A.

2015-12-01

When it comes to building durable capacity for implementing state of the art technology and earth observation (EO) data for improved decision making, it has been long recognized that a unidirectional approach (from research to application) often does not work. Co-design of capacity building effort has recently been recommended as a better alternative. This approach is a two-way street where scientists and stakeholders engage intimately along the entire chain of actions from design of research experiments to packaging of decision making tools and each party provides an equal amount of input. Scientists execute research experiments based on boundary conditions and outputs that are defined as tangible by stakeholders for decision making. On the other hand, decision making tools are packaged by stakeholders with scientists ensuring the application-specific science is relevant. In this talk, we will overview one such iterative capacity building approach that we have implemented for gravimetry-based satellite (GRACE) EO data for improved groundwater management in Pakistan. We call our approach a hybrid approach where the initial step is a forward model involving a conventional short-term (3 day) capacity building workshop in the stakeholder environment addressing a very large audience. In this forward model, the net is cast wide to 'shortlist' a set of highly motivated stakeholder agency staffs who are then engaged more directly in 1-1 training. In the next step (the backward model), these short listed staffs are then brought back in the research environment of the scientists (supply) for 1-1 and long-term (6 months) intense brainstorming, training, and design of decision making tools. The advantage of this backward model is that it allows for a much better understanding for scientists of the ground conditions and hurdles of making a EO-based scientific innovation work for a specific decision making problem that is otherwise fundamentally impossible in conventional training workshops. We demonstrate here our experience of implementing this hybrid model for capacity building for groundwater management for Pakistan Council for Research on Water Resources (PCRWR) with the ultimate goal of empowering naitonal agencies in their ability to monitor groundwater storage changes independently from satellites.

Assessing the vulnerability of economic sectors to climate variability to improve the usability of seasonal to decadal climate forecasts in Europe - a preliminary concept

NASA Astrophysics Data System (ADS)

Funk, Daniel

2015-04-01

Climate variability poses major challenges for decision-makers in climate-sensitive sectors. Seasonal to decadal (S2D) forecasts provide potential value for management decisions especially in the context of climate change where information from present or past climatology loses significance. However, usable and decision-relevant tailored climate forecasts are still sparse for Europe and successful examples of application require elaborate and individual producer-user interaction. The assessment of sector-specific vulnerabilities to critical climate conditions at specific temporal scale will be a great step forward to increase the usability and efficiency of climate forecasts. A concept for a sector-specific vulnerability assessment (VA) to climate variability is presented. The focus of this VA is on the provision of usable vulnerability information which can be directly incorporated in decision-making processes. This is done by developing sector-specific climate-impact-decision-pathways and the identification of their specific time frames using data from both bottom-up and top-down approaches. The structure of common VA's for climate change related issues is adopted which envisages the determination of exposure, sensitivity and coping capacity. However, the application of the common vulnerability components within the context of climate service application poses some fundamental considerations: Exposure - the effect of climate events on the system of concern may be modified and delayed due to interconnected systems (e.g. catchment). The critical time-frame of a climate event or event sequence is dependent on system-internal thresholds and initial conditions. But also on decision-making processes which require specific lead times of climate information to initiate respective coping measures. Sensitivity - in organizational systems climate may pose only one of many factors relevant for decision making. The scope of "sensitivity" in this concept comprises both the potential physical response of the system of concern as well as the criticality of climate-related decision-making processes. Coping capacity - in an operational context coping capacity can only reduce vulnerability if it can be applied purposeful. With respect to climate vulnerabilities this refers to the availability of suitable, usable and skillful climate information. The focus for this concept is on existing S2D climate service products and their match with user needs. The outputs of the VA are climate-impact-decision-pathways which characterize critical climate conditions, estimate the role of climate in decision-making processes and evaluate the availability and potential usability of S2D climate forecast products. A classification scheme is developed for each component of the impact-pathway to assess its specific significance. The systemic character of these schemes enables a broad application of this VA across sectors where quantitative data is limited. This concept is developed and will be tested within the context of the EU-FP7 project "European Provision Of Regional Impacts Assessments on Seasonal and Decadal Timescales" EUPORIAS.

Hartford Gerontological Nursing Leaders: From Funding Initiative to National Organization.

PubMed

Van Cleave, Janet H; Szanton, Sarah L; Shillam, Casey; Rose, Karen; Rao, Aditi D; Perez, Adriana; O'Connor, Melissa; Walker, Rachel; Buron, Bill; Boltz, Marie; Bellot, Jennifer; Batchelor-Murphy, Melissa

2016-01-01

In 2000, the John A. Hartford Foundation established the Building Academic Geriatric Nursing Capacity Program initiative, acknowledging nursing's key role in the care of the growing population of older adults. This program has supported 249 nurse scientists with pre- and postdoctoral awards. As a result of the program's success, several Building Academic Geriatric Nursing Capacity Program awardees formed an alumni organization to continue to advance the quality care of older adults. This group of Building Academic Geriatric Nursing Capacity Program awardees joined others receiving support from the John A. Hartford Foundation nursing initiatives to grow a formal organization, the Hartford Gerontological Nursing Leaders (HGNL). The purpose of this article is to present the development, accomplishments, and challenges of the HGNL, informing other professional nursing organizations that are experiencing similar accomplishments and challenges. This article also demonstrates the power of a funding initiative to grow an organization dedicated to impact gerontological health and health care through research, practice, education, and policy. Copyright © 2016 Elsevier Inc. All rights reserved.

Categorial Compositionality III: F-(co)algebras and the Systematicity of Recursive Capacities in Human Cognition

PubMed Central

Phillips, Steven; Wilson, William H.

2012-01-01

Human cognitive capacity includes recursively definable concepts, which are prevalent in domains involving lists, numbers, and languages. Cognitive science currently lacks a satisfactory explanation for the systematic nature of such capacities (i.e., why the capacity for some recursive cognitive abilities–e.g., finding the smallest number in a list–implies the capacity for certain others–finding the largest number, given knowledge of number order). The category-theoretic constructs of initial F-algebra, catamorphism, and their duals, final coalgebra and anamorphism provide a formal, systematic treatment of recursion in computer science. Here, we use this formalism to explain the systematicity of recursive cognitive capacities without ad hoc assumptions (i.e., to the same explanatory standard used in our account of systematicity for non-recursive capacities). The presence of an initial algebra/final coalgebra explains systematicity because all recursive cognitive capacities, in the domain of interest, factor through (are composed of) the same component process. Moreover, this factorization is unique, hence no further (ad hoc) assumptions are required to establish the intrinsic connection between members of a group of systematically-related capacities. This formulation also provides a new perspective on the relationship between recursive cognitive capacities. In particular, the link between number and language does not depend on recursion, as such, but on the underlying functor on which the group of recursive capacities is based. Thus, many species (and infants) can employ recursive processes without having a full-blown capacity for number and language. PMID:22514704

A long-life, high-rate lithium/sulfur cell: a multifaceted approach to enhancing cell performance.

PubMed

Song, Min-Kyu; Zhang, Yuegang; Cairns, Elton J

2013-01-01

Lithium/sulfur (Li/S) cells are receiving significant attention as an alternative power source for zero-emission vehicles and advanced electronic devices due to the very high theoretical specific capacity (1675 mA·h/g) of the sulfur cathode. However, the poor cycle life and rate capability have remained a grand challenge, preventing the practical application of this attractive technology. Here, we report that a Li/S cell employing a cetyltrimethyl ammonium bromide (CTAB)-modified sulfur-graphene oxide (S-GO) nanocomposite cathode can be discharged at rates as high as 6C (1C = 1.675 A/g of sulfur) and charged at rates as high as 3C while still maintaining high specific capacity (~ 800 mA·h/g of sulfur at 6C), with a long cycle life exceeding 1500 cycles and an extremely low decay rate (0.039% per cycle), perhaps the best performance demonstrated so far for a Li/S cell. The initial estimated cell-level specific energy of our cell was ~ 500 W·h/kg, which is much higher than that of current Li-ion cells (~ 200 W·h/kg). Even after 1500 cycles, we demonstrate a very high specific capacity (~ 740 mA·h/g of sulfur), which corresponds to ~ 414 mA·h/g of electrode: still higher than state-of-the-art Li-ion cells. Moreover, these Li/S cells with lithium metal electrodes can be cycled with an excellent Coulombic efficiency of 96.3% after 1500 cycles, which was enabled by our new formulation of the ionic liquid-based electrolyte. The performance we demonstrate herein suggests that Li/S cells may already be suitable for high-power applications such as power tools. Li/S cells may now provide a substantial opportunity for the development of zero-emission vehicles with a driving range similar to that of gasoline vehicles.

Developing a Tool to Assess the Capacity of Out-of-School Time Program Providers to Implement Policy, Systems, and Environmental Change.

PubMed

Leeman, Jennifer; Blitstein, Jonathan L; Goetz, Joshua; Moore, Alexis; Tessman, Nell; Wiecha, Jean L

2016-08-11

Little is known about public health practitioners' capacity to change policies, systems, or environments (PSEs), in part due to the absence of measures. To address this need, we partnered with the Alliance for a Healthier Generation (Alliance) to develop and test a theory-derived measure of the capacity of out-of-school time program providers to improve students' level of nutrition and physical activity through changes in PSEs. The measure was developed and tested through an engaged partnership with staff working on the Alliance's Healthy Out-of-School Time (HOST) Initiative. In total, approximately 2,000 sites nationwide are engaged in the HOST Initiative, which serves predominantly high-need children and youths. We partnered with the Alliance to conduct formative work that would help develop a survey that assessed attitudes/beliefs, social norms, external resources/supports, and self-efficacy. The survey was administered to providers of out-of-school time programs who were implementing the Alliance's HOST Initiative. Survey respondents were 185 out-of-school time program providers (53% response rate). Exploratory factor analysis yielded a 4-factor model that explained 44.7% of the variance. Factors pertained to perceptions of social norms (6 items) and self-efficacy to build support and engage a team (4 items) and create (5 items) and implement (3 items) an action plan. We report initial development and factor analysis of a tool that the Alliance can use to assess the capacity of after-school time program providers, which is critical to targeting capacity-building interventions and assessing their effectiveness. Study findings also will inform the development of measures to assess individual capacity to plan and implement other PSE interventions.

Secondary prevention lifestyle interventions initiated within 90 days after TIA or 'minor' stroke: a systematic review and meta-analysis of rehabilitation programmes.

PubMed

Heron, Neil; Kee, Frank; Cardwell, Christopher; Tully, Mark A; Donnelly, Michael; Cupples, Margaret E

2017-01-01

Strokes are often preceded by a transient ischaemic attack (TIA) or 'minor' stroke. The immediate period after a TIA/minor stroke is a crucial time to initiate secondary prevention. However, the optimal approach to prevention, including non-pharmacological measures, after TIA is not clear. To systematically review evidence about the effectiveness of delivering secondary prevention, with lifestyle interventions, in comprehensive rehabilitation programmes, initiated within 90 days of a TIA/minor stroke. Also, to categorise the specific behaviour change techniques used. The review identified randomised controlled trials by searching the Cochrane Library, Ovid MEDLINE, Ovid EMBASE, Web of Science, EBSCO CINAHL and Ovid PsycINFO. Two review authors independently screened titles and abstracts for eligibility (programmes initiated within 90 days of event; outcomes reported for TIA/minor stroke) and extracted relevant data from appraised studies; a meta-analysis was used to synthesise the results. A total of 31 potentially eligible papers were identified and four studies, comprising 774 patients post-TIA or minor stroke, met the inclusion criteria; two had poor methodological quality. Individual studies reported increased aerobic capacity but meta-analysis found no significant change in resting and peak systolic blood pressure, resting heart rate, aerobic capacity, falls, or mortality. The main behaviour change techniques were goal setting and instructions about how to perform given behaviours. There is limited evidence of the effectiveness of early post-TIA rehabilitation programmes with preventive lifestyle interventions. Further robust randomised controlled trials of comprehensive rehabilitation programmes that promote secondary prevention and lifestyle modification immediately after a TIA are needed. © British Journal of General Practice 2017.

High specific energy, high capacity nickel-hydrogen cell design

NASA Technical Reports Server (NTRS)

Wheeler, James R.

1993-01-01

A 3.5 inch rabbit-ear-terminal nickel-hydrogen cell was designed and tested to deliver high capacity at steady discharge rates up to and including a C rate. Its specific energy yield of 60.6 wh/kg is believed to be the highest yet achieved in a slurry-process nickel-hydrogen cell, and its 10 C capacity of 113.9 AH the highest capacity yet of any type in a 3.5 inch diameter size. The cell also demonstrated a pulse capability of 180 amps for 20 seconds. Specific cell parameters and performance are described. Also covered is an episode of capacity fading due to electrode swelling and its successful recovery by means of additional activation procedures.

District Capacity and the Implementation of Positive Behavior Interventions and Supports: An Exploratory Study

ERIC Educational Resources Information Center

Blakely, Allison Wright

2017-01-01

The purpose of this study was to examine the relation between "district capacity" as measured by the District Capacity Assessment (DCA) and the "initial, depth, scale," and "sustained" implementation of an evidence-based practice (EBP), Positive Behavior Interventions and Supports (PBIS). This exploratory analysis…

The Role of Leadership Capacity in Sustaining the School Improvement Initiative of Schoolwide Positive Behavior Supports

ERIC Educational Resources Information Center

Combs, Christine; Martin, Barbara N.

2011-01-01

This article examines what occurred within schools successfully implementing and sustaining Schoolwide Positive Behavior Supports through the lens of leadership capacity. Leadership capacity, a broad-based, skillful participation in leadership, promotes the capabilities of many organizational members to lead. Researchers used quantitative analysis…

Capacity building for health through community-based participatory nutrition intervention Research in rural communities

USDA-ARS?s Scientific Manuscript database

Building community capacity for health promotion in small rural communities is essential if health promotion research is to yield sustainable outcomes. Since its inception, capacity-building has been a stated goal of the Delta Nutrition Intervention Research Initiative, a tri-state collaboration in ...

A series of spinel phase cathode materials prepared by a simple hydrothermal process for rechargeable lithium batteries

NASA Astrophysics Data System (ADS)

Liang, Yan-Yu; Bao, Shu-Juan; Li, Hu-Lin

2006-07-01

A series of spinel-structured materials have been prepared by a simple hydrothermal procedure in an aqueous medium. The new synthetic method is time and energy saving i.e., no further thermal treatment and extended grinding. The main experimental process involved the insertion of lithium into electrolytic manganese dioxide with glucose as a mild reductant in an autoclave. Both the hydrothermal temperature and the presence of glucose play the critical roles in determining the final spinel integrity. Particular electrochemical performance has also been systematically explored, and the results show that Al 3+, F - co-substituted spinels have the best combination of initial capacity and capacity retention among all these samples, exhibited the initial capacity of 115 mAh/g and maintained more than 90% of the initial value at the 50th cycle.

Simultaneous adsorption of Cd²⁺ and BPA on amphoteric surfactant activated montmorillonite.

PubMed

Liu, Chongmin; Wu, Pingxiao; Zhu, Yajie; Tran, Lytuong

2016-02-01

The study mainly investigated the simultaneous adsorption of bisphenol A (BPA) and Cd(2+) from aqueous solution on octadecane-betaine modified montmorillonite (BS-Mt). The characteristics of the obtained materials were analyzed by X-ray diffraction (XRD), Fourier-transform infrared (FTIR), Specific surface area (BET) and Scanning electron microscopy/Energy disperse spectroscopy (SEM/EDS), confirming that BS-18 was successfully introduced into Mt. Also, factors including initial solution pH, initial Cd(2+)/BPA concentration, contact time and adsorbent dosage on the adsorption processes were shown to be crucial for Cd(2+) adsorption, whereas had negligible effects on BPA adsorption. In this study, we found that pseudo-second-order model fitted well with the adsorption kinetic studies for both Cd(2+) and BPA with an equilibrium time of 24 h. The Cd(2+) and BPA adsorption isotherm could be well described by Freundlich model and Langmuir model, respectively. On the basis of kinetic models, the maximum adsorption capacity of Cd(2+) in aqueous solution was slightly enhanced after modification, indicating that Cd(2+) adsorption on BS-Mt was mainly attributed to direct electrostatic attraction and the chelate reaction, while the dramatic enhancement of maximum adsorption capacity for BPA was due to the hydrophobic interaction. Copyright © 2015 Elsevier Ltd. All rights reserved.

ParticipACTION after 5 years of relaunch: a quantitative survey of Canadian organizational awareness and capacity regarding physical activity initiatives.

PubMed

Faulkner, Guy; Ramanathan, Subha; Plotnikoff, Ronald C; Berry, Tanya; Deshpande, Sameer; Latimer-Cheung, Amy E; Rhodes, Ryan E; Tremblay, Mark S; Spence, John C

2018-04-01

ParticipACTION is a Canadian physical activity communications and social marketing organization relaunched in 2007. This study assesses the capacity of Canadian organizations to adopt, implement, and promote physical activity initiatives. The four objectives were to compare findings from baseline (2008) and follow-up (2013) with respect to: (1) awareness of ParticipACTION; (2) organizational capacity to adopt, implement and promote physical activity initiatives; (3) potential differences in capacity based on organizational size, sector, and mandate; and (4) assess perceptions of ParticipACTION five years after relaunch. In this cross-sectional study, representatives from local, provincial/territorial, and national organizations completed an online survey assessing capacity to adopt, implement, and promote physical activity. Descriptive statistics and one-way analyses of variance were conducted to examine the objectives. Response rate for opening an email survey invitation and consenting to participate was 40.6% (685/1688) and 540 surveys were completed. Awareness of ParticipACTION increased from 54.6% at baseline to 93.9% at follow-up (Objective 1). Findings at both baseline and follow-up reflected good organizational capacity to adopt, implement and promote physical activity (Objective 2) although some varied by organizational sector and mandate (Objective 3). Most respondents reported that ParticipACTION provided positive leadership (65.3%), but there was less agreement regarding ParticipACTION's facilitation of infrastructure (44.0%) or organizational will/motivation (47.1%)(Objective 4). Canadian organizations continue to report having good capacity to adopt, implement, and promote physical activity. There was no discernible change in capacity indicators five years after ParticipACTION's relaunch although its broader contribution to the physical activity sector was endorsed.

Facile and Eco-Friendly Synthesis of Finger-Like Co3O4 Nanorods for Electrochemical Energy Storage

PubMed Central

Sun, Shijiao; Zhao, Xiangyu; Yang, Meng; Ma, Liqun; Shen, Xiaodong

2015-01-01

Co3O4 nanorods were prepared by a facile hydrothermal method. Eco-friendly deionized water rather than organic solvent was used as the hydrothermal media. The as-prepared Co3O4 nanorods are composed of many nanoparticles of 30–50 nm in diameter, forming a finger-like morphology. The Co3O4 electrode shows a specific capacitance of 265 F g−1 at 2 mV s−1 in a supercapacitor and delivers an initial specific discharge capacity as high as 1171 mAh g−1 at a current density of 50 mA g−1 in a lithium ion battery. Excellent cycling stability and electrochemical reversibility of the Co3O4 electrode were also obtained. PMID:28347124

Continuous quality improvement: a shared governance model that maximizes agent-specific knowledge.

PubMed

Burkoski, Vanessa; Yoon, Jennifer

2013-01-01

Motivate, Innovate, Celebrate: an innovative shared governance model through the establishment of continuous quality improvement (CQI) councils was implemented across the London Health Sciences Centre (LHSC). The model leverages agent-specific knowledge at the point of care and provides a structure aimed at building human resources capacity and sustaining enhancements to quality and safe care delivery. Interprofessional and cross-functional teams work through the CQI councils to identify, formulate, execute and evaluate CQI initiatives. In addition to a structure that facilitates collaboration, accountability and ownership, a corporate CQI Steering Committee provides the forum for scaling up and spreading this model. Point-of-care staff, clinical management and educators were trained in LEAN methodology and patient experience-based design to ensure sufficient knowledge and resources to support the implementation.

[Adsorption characteristics of acetone and butanone onto honeycomb ZSM-5 molecular sieve].

PubMed

Du, Juan; Luan, Zhi-Qiang; Xie, Qiang; Ye, Ping-Wei; Li, Kai; Wang, Xi-Qin

2013-12-01

Adsorption capacity of acetone and acetone-butanone mixture onto honeycomb ZSM-5 molecular sieve was measured in this paper, and the influences of relative humidity, initial adsorbate concentration and airflow velocity on the adsorption process were investigated. Besides, adsorption performance parameters were calculated by Wheeler's equation. The results showed that relative humidity had no obvious influence on the acetone adsorption performance, which suggests that this material has good hydrophobic ability; in the low concentration range, the dynamic saturated adsorption capacity of acetone increased with the increase of initial concentration, but in the occasion of high concentration of acetone gas (more than 9 mg x L(-1)), the dynamic saturated adsorption capacity maintained at a certain level and did not vary with the increase of initial concentration; the increase of air flow velocity resulted in significant increase of acetone adsorption rate constant, at the same time the critical layer thickness of the adsorbent bed also increased significantly. In the cases of acetone-butanone mixture, the adsorption capacity of butanone onto ZSM-5 was clearly higher than that of acetone.

Phonological working memory impairments in children with specific language impairment: where does the problem lie?

PubMed

Alt, Mary

2011-01-01

The purpose of this study was to determine which factors contribute to the lexical learning deficits of children with specific language impairment (SLI). Participants included 40 7-8-year old participants, half of whom were diagnosed with SLI and half of whom had normal language skills. We tested hypotheses about the contributions to word learning of the initial encoding of phonological information and the link to long-term memory. Children took part in a computer-based fast-mapping task which manipulated word length and phonotactic probability to address the hypotheses. The task had a recognition and a production component. Data were analyzed using mixed ANOVAs with post-hoc testing. Results indicate that the main problem for children with SLI is with initial encoding, with implications for limited capacity. There was not strong evidence for specific deficits in the link to long-term memory. We were able to ascertain which aspects of lexical learning are most problematic for children with SLI in terms of fast-mapping. These findings may allow clinicians to focus intervention on known areas of weakness. Future directions include extending these findings to slow mapping scenarios. The reader will understand how different components of phonological working memory contribute to the word learning problems of children with specific language impairment. Copyright © 2010 Elsevier Inc. All rights reserved.

Revel8or: Model Driven Capacity Planning Tool Suite

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhu, Liming; Liu, Yan; Bui, Ngoc B.

2007-05-31

Designing complex multi-tier applications that must meet strict performance requirements is a challenging software engineering problem. Ideally, the application architect could derive accurate performance predictions early in the project life-cycle, leveraging initial application design-level models and a description of the target software and hardware platforms. To this end, we have developed a capacity planning tool suite for component-based applications, called Revel8tor. The tool adheres to the model driven development paradigm and supports benchmarking and performance prediction for J2EE, .Net and Web services platforms. The suite is composed of three different tools: MDAPerf, MDABench and DSLBench. MDAPerf allows annotation of designmore » diagrams and derives performance analysis models. MDABench allows a customized benchmark application to be modeled in the UML 2.0 Testing Profile and automatically generates a deployable application, with measurement automatically conducted. DSLBench allows the same benchmark modeling and generation to be conducted using a simple performance engineering Domain Specific Language (DSL) in Microsoft Visual Studio. DSLBench integrates with Visual Studio and reuses its load testing infrastructure. Together, the tool suite can assist capacity planning across platforms in an automated fashion.« less

Enhanced performance of spherical natural graphite coated by Li4Ti5O12 as anode for lithium-ion batteries

NASA Astrophysics Data System (ADS)

Lu, Mi; Tian, Yanyan; Zheng, Xiaodong; Gao, Jun; Huang, Bing

2012-12-01

The natural graphite (NG) is coated with Li4Ti5O12 (LTO) and the composite shows a markedly enhanced rate performance due to the decrease of charge transfer resistance after LTO coating. The specific capacity of the NG charge-discharged at 2 C is increased by 60.3% (128.7 vs. 80.3 mAh g-1) by coating it with 1 wt.% of Li4Ti5O12 (LTO). The comparison of the NG and that coated with 1 wt.% LTO at 0.1 C shows that the initial reversible capacity is increased from 318.1 mAh g-1 to 357.5 mAh g-1 after coating, while the total irreversible capacity loss after 50 cycles is decreased from 122.8 mAh g-1 to 103.9 mAh g-1. The composite improves the energy and power densities, safety, cycle life and lowers the price of the lithium-ion battery while avoiding the gas-swelling of full battery caused by Ti4+ because the final coating material is the lithiated LTO (Li7Ti5O12 or Li9Ti5O12).

Sandwich-like MoS2 @SnO2 @C with High Capacity and Stability for Sodium/Potassium Ion Batteries.

PubMed

Chen, Zhi; Yin, Dangui; Zhang, Ming

2018-04-01

Sandwich-like MoS 2 @SnO 2 @C nanosheets are prepared by facile hydrothermal reactions. SnO 2 nanosheets can attach to exfoliated MoS 2 nanosheets to prevent restacking of adjacent MoS 2 nanosheets, and carbon transformed from polyvinylpyrrolidone is coated on MoS 2 @SnO 2 , forming a sandwich structure to maintain cycling stability. As an anode for sodium-ion batteries, the electrode greatly deliverers a high initial discharge specific capacity of 530 mA h g -1 and maintains at 396 mA h g -1 after 150 cycles at 0.1 A g -1 . Even at a large current density of 1 A g -1 , it can hold 230 mA h g -1 after 450 cycles. Besides, as an anode for K + storage, the electrode also shows a discharge capacity of 312 mA h g -1 after 25 cycles at 0.05 A g -1 . This work may provide a new strategy to prepare other composites which can be applied to new kind of rechargeable batteries. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Cobalt oxide-carbon nanosheet nanoarchitecture as an anode for high-performance lithium-ion battery.

PubMed

Wang, Huanlei; Mao, Nan; Shi, Jing; Wang, Qigang; Yu, Wenhua; Wang, Xin

2015-02-04

To improve the electrochemical performance of cobalt oxide owing to its inherent poor electrical conductivity and large volume expansion/contraction, Co3O4-carbon nanosheet hybrid nanoarchitectures were synthesized by a facile and scalable chemical process. However, it is still a challenge to control the size of Co3O4 particles down to ∼5 nm. Herein, we created nanosized cobalt oxide anchored 3D arrays of carbon nanosheets by the control of calcination condition. The uniformly dispersed Co3O4 nanocrystals on carbon nanosheets held a diameter down to ∼5 nm. When tested as anode materials for lithium-ion batteries, high lithium storage over 1200 mAh g(-1) is achieved, whereas high rate capability with capacity of about 390 mAh g(-1) at 10 A g(-1) is maintained through nanoscale diffusion distances and interconnected porous structure. After 500 cycles, the cobalt oxide-carbon nansheets hybrid display a reversible capacity of about 970 mAh g(-1) at 1 A g(-1). The synergistic effect between nanosized cobalt oxide and sheetlike interconnected carbon nanosheets lead to the greatly improved specific capacity and the initial Coulombic efficiency of the hybrids.

Health Technology Assessment: Global Advocacy and Local Realities Comment on "Priority Setting for Universal Health Coverage: We Need Evidence-Informed Deliberative Processes, Not Just More Evidence on Cost-Effectiveness".

PubMed

Chalkidou, Kalipso; Li, Ryan; Culyer, Anthony J; Glassman, Amanda; Hofman, Karen J; Teerawattananon, Yot

2016-08-29

Cost-effectiveness analysis (CEA) can help countries attain and sustain universal health coverage (UHC), as long as it is context-specific and considered within deliberative processes at the country level. Institutionalising robust deliberative processes requires significant time and resources, however, and countries often begin by demanding evidence (including local CEA evidence as well as evidence about local values), whilst striving to strengthen the governance structures and technical capacities with which to generate, consider and act on such evidence. In low- and middle-income countries (LMICs), such capacities could be developed initially around a small technical unit in the health ministry or health insurer. The role of networks, development partners, and global norm setting organisations is crucial in supporting the necessary capacities. © 2017 The Author(s); Published by Kerman University of Medical Sciences. This is an open-access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Sarcoidosis-associated pulmonary hypertension.

PubMed

Cordova, Francis C; D'Alonzo, Gilbert

2013-09-01

Pulmonary hypertension is a serious complication of sarcoidosis. This review discusses clinical characteristics of patients with sarcoid-associated pulmonary hypertension (SAPH) and pitfalls in the diagnosis, and highlights potential therapies. SAPH is common in patients with advanced disease, but it can occur in patients with minimal disease burden. Risk factors for SAPH include restrictive lung physiology, hypoxemia, advanced Scadding chest X-ray stage, and low carbon monoxide diffusion capacity. Echocardiogram is a good initial screening tool in the diagnosis of pulmonary hypertension, but right heart catheterization is necessary to confirm the diagnosis. Treatment with pulmonary vasodilators, including endothelin antagonists, can lead to improvements in pulmonary hemodynamics in some patients but may not improve their exercise capacity. Forced vital capacity is an important predictor of exercise performance in patients with SAPH. Clinical observations and response to specific therapies for pulmonary hypertension suggest the presence of different SAPH phenotypes. Patients who complain of persistent dyspnea should be screened for the presence of pulmonary hypertension. The prognosis of SAPH is poor and it is prudent to consider referral of these patients for lung transplantation. In some patients with SAPH, treatment with anti-inflammatory agents and pulmonary vasodilators can lower pulmonary arterial pressures, improve dyspnea and functionality, and enhance overall quality of life.

High specific energy, high capacity nickel-hydrogen cell design

NASA Technical Reports Server (NTRS)

Wheeler, James R.

1993-01-01

A 3.5 inch rabbit-ear-terminal nickel-hydrogen cell has been designed and tested to deliver high capacity at a C/1.5 discharge rate. Its specific energy yield of 60.6 wh/kg is believed to be the highest yet achieved in a slurry-process nickel-hydrogen cell, and its 10 C capacity of 113.9 AH the highest capacity yet made at a discharge rate this high in the 3.5 inch diameter size. The cell also demonstrated a pulse capability of 180 amps for 20 seconds. Specific cell parameters, performance, and future test plans are described.

Creativity and working memory capacity in sports: working memory capacity is not a limiting factor in creative decision making amongst skilled performers.

PubMed

Furley, Philip; Memmert, Daniel

2015-01-01

The goal of the study was to investigate the relationship between domain-general working memory capacity and domain-specific creativity amongst experienced soccer players. We administered the automated operation span task in combination with a domain-specific soccer creativity task to a group of 61 experienced soccer players to address the question whether an athlete's domain-specific creativity is restricted by their domain-general cognitive abilities (i.e., working memory capacity). Given that previous studies have either found a positive correlation, a negative correlation, or no correlation between working memory capacity and creativity, we analyzed the data in an exploratory manner by following recent recommendations to report effect-size estimations and their precision in form of 95% confidence intervals. The pattern of results provided evidence that domain-general working memory capacity is not associated with creativity in a soccer-specific creativity task. This pattern of results suggests that future research and theorizing on the role of working memory in everyday creative performance needs to distinguish between different types of creative performance while also taking the role of domain-specific experience into account.

Creativity and working memory capacity in sports: working memory capacity is not a limiting factor in creative decision making amongst skilled performers

PubMed Central

Furley, Philip; Memmert, Daniel

2015-01-01

The goal of the study was to investigate the relationship between domain-general working memory capacity and domain-specific creativity amongst experienced soccer players. We administered the automated operation span task in combination with a domain-specific soccer creativity task to a group of 61 experienced soccer players to address the question whether an athlete’s domain-specific creativity is restricted by their domain-general cognitive abilities (i.e., working memory capacity). Given that previous studies have either found a positive correlation, a negative correlation, or no correlation between working memory capacity and creativity, we analyzed the data in an exploratory manner by following recent recommendations to report effect-size estimations and their precision in form of 95% confidence intervals. The pattern of results provided evidence that domain-general working memory capacity is not associated with creativity in a soccer-specific creativity task. This pattern of results suggests that future research and theorizing on the role of working memory in everyday creative performance needs to distinguish between different types of creative performance while also taking the role of domain-specific experience into account. PMID:25713552

Capacity Evaluations of Psychiatric Patients Requesting Assisted Death in the Netherlands

PubMed Central

Doernberg, Samuel N.; Peteet, John R.; Kim, Scott Y.H.

2016-01-01

Objective Euthanasia or physician-assisted suicide (EAS) of psychiatric patients is legal in some countries but remains controversial. This study examined a frequently raised concern about the practice: how physicians address the issue of decision-making capacity of persons requesting psychiatric EAS. Methods A review of psychiatric EAS case summaries published by the Dutch Regional Euthanasia Review Committees. Directed content analysis using a capacity-specific 4 abilities model (understanding of facts, applying those facts to self, weighing/reasoning, and evidencing choice) was used to code texts discussing capacity. 66 cases from 2011-2014 were reviewed. Results In 55% (36 of 66) of cases the capacity-specific discussion consisted of only global judgments of patients’ capacity, even in patients with psychotic disorders. 32% (21 of 66) of cases included evidentiary statements regarding capacity-specific abilities; only 5 cases (8%) mentioned all four abilities. Physicians frequently stated that psychosis or depression did or did not impact capacity but provided little explanation regarding their judgments. Physicians in 8 cases (12%) disagreed about capacity; even when no explanation is given for the disagreement, the review committees generally accepted the judgment of the physician performing EAS. In one case, the physicians noted that not all capacity-specific abilities were intact but deemed the patient capable. Conclusion Case summaries of psychiatric EAS in the Netherlands do not show that a high threshold of capacity is required for granting EAS. Although this may reflect limitations in documentation, it likely represents a practice that reflects the normative position of the review committees. PMID:27590345

Proteomic analysis of HDL from inbred mouse strains implicates APOE associated with HDL in reduced cholesterol efflux capacity via the ABCA1 pathway[S

PubMed Central

Pamir, Nathalie; Hutchins, Patrick; Ronsein, Graziella; Vaisar, Tomas; Reardon, Catherine A.; Getz, Godfrey S.; Lusis, Aldons J.; Heinecke, Jay W.

2016-01-01

Cholesterol efflux capacity associates strongly and negatively with the incidence and prevalence of human CVD. We investigated the relationships of HDL’s size and protein cargo with its cholesterol efflux capacity using APOB-depleted serum and HDLs isolated from five inbred mouse strains with different susceptibilities to atherosclerosis. Like humans, mouse HDL carried >70 proteins linked to lipid metabolism, the acute-phase response, proteinase inhibition, and the immune system. HDL’s content of specific proteins strongly correlated with its size and cholesterol efflux capacity, suggesting that its protein cargo regulates its function. Cholesterol efflux capacity with macrophages strongly and positively correlated with retinol binding protein 4 (RBP4) and PLTP, but not APOA1. In contrast, ABCA1-specific cholesterol efflux correlated strongly with HDL’s content of APOA1, APOC3, and APOD, but not RBP4 and PLTP. Unexpectedly, APOE had a strong negative correlation with ABCA1-specific cholesterol efflux capacity. Moreover, the ABCA1-specific cholesterol efflux capacity of HDL isolated from APOE-deficient mice was significantly greater than that of HDL from wild-type mice. Our observations demonstrate that the HDL-associated APOE regulates HDL’s ABCA1-specific cholesterol efflux capacity. These findings may be clinically relevant because HDL’s APOE content associates with CVD risk and ABCA1 deficiency promotes unregulated cholesterol accumulation in human macrophages. PMID:26673204

Polyethylene-glycol-doped polypyrrole increases the rate performance of the cathode in lithium-sulfur batteries.

PubMed

Wu, Feng; Chen, Junzheng; Li, Li; Zhao, Teng; Liu, Zhen; Chen, Renjie

2013-08-01

Polypyrrole-polyethylene glycol (PPy/PEG)-modified sulfur/aligned carbon nanotubes (PPy/PEG-S/A-CNTs) were synthesized by using an in situ polymerization method. The ratio of PPy to PEG equaled 31.7:1 after polymerization, and the PEG served as a cation dopant in the polymerization and electrochemical reactions. Elemental analysis, FTIR, Raman spectroscopy, XRD, and electrochemical methods were performed to measure the physicochemical properties of the composite. Elemental analysis demonstrated that the sulfur, PPy, PEG, A-CNT, and chloride content in the synthesized material was 64.6%, 22.1%, 0.7%, 12.1%, and 0.5%, respectively. The thickness of the polymer shell was about 15-25 nm, and FTIR confirmed the successful PPy/PEG synthesis. The cathode exhibited a high initial specific capacity of 1355 mAh g(-1) , and a sulfur usage of 81.1%. The reversible capacity of 924 mAh g(-1) was obtained after 100 cycles, showing a remarkably improved cyclability compared to equivalent systems without PEG doping and without any coatings. PPy/PEG provided an effective electronically conductive network and a stable interface structure for the cathode. Rate performance of the PPy/PEG- S/A-CNT composite was more than double that of the unmodified S/A-CNTs. Remarkably, the battery could work at a very high current density of 8 A g(-1) and reached an initial capacity of 542 mAh g(-1) ; it also retained a capacity of 480 mAh g(-1) after 100 cycles. The addition of PEG as a dopant in the PPy shell contributed to this prominent rate improvement. Lithium ions and electrons were available everywhere on the surfaces of the particles, and thus could greatly improve the electrochemical reaction; PEG is a well-known solvent for lithium salts and a very good lithium-ion catcher. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Electrochemical performance and structure evolution of core-shell nano-ring α-Fe2O3@Carbon anodes for lithium-ion batteries

NASA Astrophysics Data System (ADS)

Sun, Yan-Hui; Liu, Shan; Zhou, Feng-Chen; Nan, Jun-Min

2016-12-01

Core-shell nano-ring α-Fe2O3@Carbon (CSNR) composites with different carbon content (CSNR-5%C and CSNR-13%C) are synthesized using a hydrothermal method by controlling different amounts of glucose and α-Fe2O3 nano-rings with further annealing. The CSNR electrodes exhibit much improved specific capacity, cycling stability and rate capability compared with that of bare nano-ring α-Fe2O3 (BNR), which is attributed to the core-shell nano-ring structure of CSNR. The carbon shell in the inner and outer surface of CSNR composite can increase electron conductivity of the electrode and inhibit the volume change of α-Fe2O3 during discharge/charge processes, and the nano-ring structure of CSNR can buffer the volume change too. The CSNR-5%C electrode shows super high initial discharge/charge capacities of 1570/1220 mAh g-1 and retains 920/897 mAh g-1 after 200 cycles at 500 mA g-1 (0.5C). Even at 2000 mA g-1 (2C), the electrode delivers the initial capacities of 1400/900 mAh g-1, and still maintains 630/610 mAh g-1 after 200 cycles. The core-shell nano-rings opened during cycling and rebuilt a new flower-like structure consisting of α-Fe2O3@Carbon nano-sheets. The space among the nano-sheet networks can further buffer the volume expansion of α-Fe2O3 and facilitate the transportation of electrons and Li+ ions during the charge/discharge processes, which increases the capacity and rate capability of the electrode. It is the first time that the evolution of core-shell α-Fe2O3@Carbon changing to flower-like networks during lithiation/de-lithiation has been reported.

Refrigerator with variable capacity compressor and cycle priming action through capacity control and associated methods

DOEpatents

Gomes, Alberto Regio; Litch, Andrew D.; Wu, Guolian

2016-03-15

A refrigerator appliance (and associated method) that includes a condenser, evaporator and a multi-capacity compressor. The appliance also includes a pressure reducing device arranged within an evaporator-condenser refrigerant circuit, and a valve system for directing or restricting refrigerant flow through the device. The appliance further includes a controller for operating the compressor upon the initiation of a compressor ON-cycle at a priming capacity above a nominal capacity for a predetermined or calculated duration.

A Quality Assurance Initiative for Commercial-Scale Production in High-Throughput Cryopreservation of Blue Catfish Sperm

PubMed Central

Hu, E; Liao, T. W.; Tiersch, T. R.

2013-01-01

Cryopreservation of fish sperm has been studied for decades at a laboratory (research) scale. However, high-throughput cryopreservation of fish sperm has recently been developed to enable industrial-scale production. This study treated blue catfish (Ictalurus furcatus) sperm high-throughput cryopreservation as a manufacturing production line and initiated quality assurance plan development. The main objectives were to identify: 1) the main production quality characteristics; 2) the process features for quality assurance; 3) the internal quality characteristics and their specification designs; 4) the quality control and process capability evaluation methods, and 5) the directions for further improvements and applications. The essential product quality characteristics were identified as fertility-related characteristics. Specification design which established the tolerance levels according to demand and process constraints was performed based on these quality characteristics. Meanwhile, to ensure integrity throughout the process, internal quality characteristics (characteristics at each quality control point within process) that could affect fertility-related quality characteristics were defined with specifications. Due to the process feature of 100% inspection (quality inspection of every fish), a specific calculation method, use of cumulative sum (CUSUM) control charts, was applied to monitor each quality characteristic. An index of overall process evaluation, process capacity, was analyzed based on in-control process and the designed specifications, which further integrates the quality assurance plan. With the established quality assurance plan, the process could operate stably and quality of products would be reliable. PMID:23872356

School Mental Health: The Impact of State and Local Capacity-Building Training

ERIC Educational Resources Information Center

Stephan, Sharon; Paternite, Carl; Grimm, Lindsey; Hurwitz, Laura

2014-01-01

Despite a growing number of collaborative partnerships between schools and community-based organizations to expand school mental health (SMH) service capacity in the United States, there have been relatively few systematic initiatives focused on key strategies for large-scale SMH capacity building with state and local education systems. Based on a…

Measure of School Capacity for Improvement (MSCI). User Manual and Technical Report

ERIC Educational Resources Information Center

Hughes, Georgia K.; Copley, Lisa D.; Howley, Caitlin W.; Meehan, Merrill L.

2005-01-01

Building capacity within schools and districts for continuous improvement is a goal of educators at all levels across the United States of America. An important first step in capacity building is identifying schools' current strengths and weaknesses. Schools can then begin building upon existing strengths to implement improvement initiatives.…

Community Prevention Coalition Context and Capacity Assessment: Comparing the United States and Mexico

ERIC Educational Resources Information Center

Brown, Louis D.; Chilenski, Sarah M.; Ramos, Rebeca; Gallegos, Nora; Feinberg, Mark E.

2016-01-01

Effective planning for community health partnerships requires understanding how initial readiness--that is, contextual factors and capacity--influences implementation of activities and programs. This study compares the context and capacity of drug and violence prevention coalitions in Mexico to those in the United States. Measures of coalition…

The DELTA PREP Initiative" Accelerating Coalition Capacity for Intimate Partner Violence Prevention

ERIC Educational Resources Information Center

Zakocs, Ronda; Freire, Kimberley E.

2015-01-01

Background: The DELTA PREP Project aimed to build the prevention capacity of 19 state domestic violence coalitions by offering eight supports designed to promote prevention integration over a 3-year period: modest grant awards, training events, technical assistance, action planning, coaching hubs, the Coalition Prevention Capacity Assessment, an…

Building Regional Capacity: Lessons from Leadership South West

ERIC Educational Resources Information Center

Bolden, Richard; Bagnall, Jackie

2009-01-01

Purpose: The purpose of this paper is to present experiences and insights from an higher education-led initiative to build leadership capacity within the South West of England in order to the shed light onto the processes and mechanisms of regional capacity building. Design/methodology/approach: The approach was one of participative action…

Hydroxylamine hydrochloride: A novel anode material for high capacity lithium-ion batteries

NASA Astrophysics Data System (ADS)

Shao, Lianyi; Shu, Jie; Lao, Mengmeng; Lin, Xiaoting; Wu, Kaiqiang; Shui, Miao; Li, Peng; Long, Nengbing; Ren, Yuanlong

2014-12-01

H3NOHCl is used for the first time as anode material for lithium-ion batteries. Electrochemical results show that H3NOHCl with particle size of 4-12 μm can deliver an initial charge capacity of 1018.6 mAh g-1, which is much higher than commercial graphite. After 30 cycles, the reversible capacity can be kept at 676.1 mAh g-1 at 50 mA g-1. Up to 50 cycles, H3NOHCl still maintains a lithium storage capacity of 368.9 mAh g-1. Even cycled at 200 mA g-1, H3NOHCl can deliver a charge capacity of 715.7 mAh g-1. It suggests that H3NOHCl has high lithium storage capacity, excellent cycling stability and outstanding rate performance. Besides, the electrochemical reaction between H3NOHCl and Li is also investigated by various ex-situ techniques. It can be found that H3NOHCl irreversibly decomposes into Li3N and LiCl during the initial discharge process and LiNO2 can be formed after a reverse charge process.

Enhanced performance of lithium-sulfur batteries with an ultrathin and lightweight MoS2/carbon nanotube interlayer

NASA Astrophysics Data System (ADS)

Yan, Lingjia; Luo, Nannan; Kong, Weibang; Luo, Shu; Wu, Hengcai; Jiang, Kaili; Li, Qunqing; Fan, Shoushan; Duan, Wenhui; Wang, Jiaping

2018-06-01

Ultrathin and lightweight MoS2/carbon nanotube (CNT) interlayers are developed to effectively trap polysulfides in high-performance lithium-sulfur (Li-S) batteries. The MoS2/CNT interlayer is constructed by loading MoS2 nanosheets onto a cross-stacked CNT film. The CNT film with excellent conductivity and superior mechanical properties provides the Li-S batteries with a uniform conductive network, a supporting skeleton for the MoS2 nanosheets, as well as a physical barrier for the polysulfides. Moreover, chemical interactions and bonding between the MoS2 nanosheets and the polysulfides are evident. The electrode with the MoS2/CNT interlayer delivers an attractive specific capacity of 784 mA h g-1 at a high capacity rate of 10 C. In addition, the electrode demonstrates a high initial capacity of 1237 mA h g-1 and a capacity fade as low as -0.061% per cycle over 500 charge/discharge cycles at 0.2 C. The problem of self-discharge can also be suppressed with the introduction of the MoS2/CNT interlayer. The simple fabrication procedure, which is suitable for commercialization, and the outstanding electrochemical performance of the cells with the MoS2/CNT interlayer demonstrate a great potential for the development of high-performance Li-S batteries.

Three-dimensional graphene sheets with NiO nanobelt outgrowths for enhanced capacity and long term high rate cycling Li-ion battery anode material

NASA Astrophysics Data System (ADS)

Shi, Waipeng; Zhang, Yingmeng; Key, Julian; Shen, Pei Kang

2018-03-01

An efficient synthesis method to grow well attached NiO nanobelts from 3D graphene sheets (3DGS) is reported herein. Ni-ion exchanged resin provides the initial Ni reactant portion, which serves both as a catalyst to form 3DGS and then as a seeding agent to grow the NiO nanobelts. The macroporous structure of 3DGS provides NiO containment to achieve a high cycling stability of up to 445 mAh g-1 after 360 cycles (and >112% capacity retention after 515 cycles) at a high current density of 2 A g-1. With a 26.8 wt.% content of NiO on 3DGS, increases in specific and volumetric capacity were 41.6 and 75.7% respectively over that of 3DGS at matching current densities. Therefore, the seeded growth of NiO nanobelts from 3DGS significantly boosts volumetric capacity, while 3DGS enables high rate long term cycling of the NiO. The high rate cycling stability of NiO on 3DGS can be attributed to (i) good attachment and contact to the large surface of 3DGS, (ii) high electron conductivity and rapid Li-ion transfer (via the interconnected, highly conductive graphitized walls of 3DGS) and (iii) buffering void space in 3DGS to contain volume expansion of NiO during charge/discharge.

Optimizing the robustness of electrical power systems against cascading failures.

PubMed

Zhang, Yingrui; Yağan, Osman

2016-06-21

Electrical power systems are one of the most important infrastructures that support our society. However, their vulnerabilities have raised great concern recently due to several large-scale blackouts around the world. In this paper, we investigate the robustness of power systems against cascading failures initiated by a random attack. This is done under a simple yet useful model based on global and equal redistribution of load upon failures. We provide a comprehensive understanding of system robustness under this model by (i) deriving an expression for the final system size as a function of the size of initial attacks; (ii) deriving the critical attack size after which system breaks down completely; (iii) showing that complete system breakdown takes place through a first-order (i.e., discontinuous) transition in terms of the attack size; and (iv) establishing the optimal load-capacity distribution that maximizes robustness. In particular, we show that robustness is maximized when the difference between the capacity and initial load is the same for all lines; i.e., when all lines have the same redundant space regardless of their initial load. This is in contrast with the intuitive and commonly used setting where capacity of a line is a fixed factor of its initial load.

Gulf of Mexico Initiative: NASA Capacity Building in the Gulf Region

NASA Astrophysics Data System (ADS)

Armstrong, D.; Graham, W. D.; Searby, N. D.

2012-12-01

In the wake of hurricanes Katrina and Rita, NASA created the Gulf of Mexico Initiative (GOMI) to help the region recover and to build the capacity of local and regional organizations to utilize NASA Earth science assets to establish effective policies, encourage sustainable natural resource management and utilization, and to expeditiously respond to crises. GOMI worked closely with the Gulf of Mexico Alliance (GOMA), a regional collaboration of the five US Gulf states and 13 federal agencies, to select projects that addressed high priority issues of the region. Many capabilities developed by this initiative have been adopted by end-users and have been leveraged to respond to other natural and man made disasters such as the Deepwater Horizon oil spill (2010), record breaking floods along the Mississippi River (2011), unprecedented tornado supercells (2011), and extreme drought (2012). Examples of successful capacity building projects will be presented and the lessons learned from these projects will be discussed.

Tailoring nanostructured MnO2 as anodes for lithium ion batteries with high reversible capacity and initial Coulombic efficiency

NASA Astrophysics Data System (ADS)

Zhang, Lifeng; Song, Jiajia; Liu, Yi; Yuan, Xiaoyan; Guo, Shouwu

2018-03-01

Developing high energy storage lithium ion batteries (LIBs) using manganese oxides as anodes is an attractive challenge due to their high theoretical capacity and abundant resources. However, the manganese oxides anodes still suffer from the low initial Coulombic efficiency and poor rate performance. Herein, we demonstrate that nano-sized morphological engineering is a facile and effective strategy to improve the electrochemical performance of the manganese dioxide (MnO2) for LIBs. The tailored MnO2 nanoparticles (NPs) exhibit high reversible capacity (1095 mAh g-1 at 100 mA g-1), high initial Coulombic efficiency (94.5%) and good rate capability (464 mAh g-1 at 2000 mA g-1). The enhanced electrochemical performance of MnO2 NPs can be attributed to the presences of numerous electrochemically active sites and interspaces among the NPs.

Building academic capacity through statewide partnerships.

PubMed

Green, Alexia; Mancini, Mary E; Flemming, Sondra; Bingle, Catherine; Jordan, Clair; Kishi, Aileen; Fowler, Chris; Thomas, Kathy; Sjoberg, Elizabeth; Walker, Scheleen

2011-01-01

In 2008, Texas was challenged by the Center to Champion Nursing in America, an initiative of the Robert Wood Johnson Foundation and AARP, to join a nationwide campaign for action to increase nursing education capacity. This article describes how one state created academic partnerships to achieve capacity building and strengthened relationships and commitments to invest in nursing education. Three year outcomes include a) the creation of a statewide team to address nursing education capacity, b) progress toward doubling the number of nursing graduates from the state's schools of nursing, c) strengthening and emphasizing retention efforts across the state, d) regionalization, including implementation of a $1 million grant and e) transitioning the statewide team to a broader focus and commitment to the Initiative on the Future of Nursing via the formation of a Regional Action Coalition. Copyright © 2011 Elsevier Inc. All rights reserved.

Establishing a regional network of academic centers to support decision making for new vaccine introduction in Latin America and the Caribbean: the ProVac experience.

PubMed

Toscano, C M; Jauregui, B; Janusz, C B; Sinha, A; Clark, A D; Sanderson, C; Resch, S; Ruiz Matus, C; Andrus, J K

2013-07-02

The Pan American Health Organization's ProVac Initiative, designed to strengthen national decision making regarding the introduction of new vaccines, was initiated in 2004. Central to realizing ProVac's vision of regional capacity building, the ProVac Network of Centers of Excellence (CoEs) was established in 2010 to provide research support to the ProVac Initiative, leveraging existing capacity at Latin American and Caribbean (LAC) universities. We describe the process of establishing the ProVac Network of CoEs and its initial outcomes and challenges. A survey was sent to academic, not-for-profit institutions in LAC that had recently published work in the areas of clinical decision sciences and health economic analysis. Centers invited to join the Network were selected by an international committee on the basis of the survey results. Selection criteria included academic productivity in immunization-related work, team size and expertise, successful collaboration with governmental agencies and international organizations, and experience in training and education. The Network currently includes five academic institutions across LAC. Through open dialog and negotiation, specific projects were assigned to centers according to their areas of expertise. Collaboration among centers was highly encouraged. Faculty from ProVac's technical partners were assigned as focal points for each project. The resulting work led to the development and piloting of tools, methodological guides, and training materials that support countries in assessing existing evidence and generating new evidence on vaccine introduction. The evidence generated is shared with country-level decision makers and the scientific community. As the ProVac Initiative expands to other regions of the world with support from immunization and public health partners, the establishment of other regional and global networks of CoEs will be critical. The experience of LAC in creating the current network could benefit the formation of similar structures that support evidence-based decisions regarding new public health interventions. Copyright © 2013 Elsevier Ltd. All rights reserved.

Methods and Apparatuses for Signaling with Geometric Constellations

NASA Technical Reports Server (NTRS)

Barsoum, Maged F. (Inventor); Jones, Christopher R. (Inventor)

2018-01-01

Communication systems are described that use signal constellations, which have unequally spaced (i.e. `geometrically` shaped) points. In many embodiments, the communication systems use specific geometric constellations that are capacity optimized at a specific SNR. In addition, ranges within which the constellation points of a capacity optimized constellation can be perturbed and are still likely to achieve a given percentage of the optimal capacity increase compared to a constellation that maximizes d.sub.min, are also described. Capacity measures that are used in the selection of the location of constellation points include, but are not limited to, parallel decode (PD) capacity and joint capacity.

Methods and apparatuses for signaling with geometric constellations

NASA Technical Reports Server (NTRS)

Jones, Christopher R. (Inventor); Barsoum, Maged F. (Inventor)

2012-01-01

Communication systems are described that use signal constellations, which have unequally spaced (i.e. geometrically shaped) points. In many embodiments, the communication systems use specific geometric constellations that are capacity optimized at a specific SNR. In addition, ranges within which the constellation points of a capacity optimized constellation can be perturbed and are still likely to achieve a given percentage of the optimal capacity increase compared to a constellation that maximizes d.sub.min, are also described. Capacity measures that are used in the selection of the location of constellation points include, but are not limited to, parallel decode (PD) capacity and joint capacity.

A conceptual study on the formulation of a permeable reactive pavement with activated carbon additives for controlling the fate of non-point source environmental organic contaminants.

PubMed

Huang, Shengyi; Liang, Chenju

2018-02-01

To take advantage of the road pavement network where non-point source (NPS) pollution such as benzene, toluene, ethyl-benzene, and xylene (BTEX) from vehicle traffic exhaust via wet and dry atmospheric deposition occurs, the asphalt pavement may be used as a media to control the NPS pollution. An experiment to prepare an adsorptive porous reactive pavement (PRP) was initiated to explore the potential to reduce environmental NPS vehicle pollution. The PRP was prepared and studied as follows: various activated carbons (AC) were initially screened to determine if they were suitable as an additive in the porous asphalt mixture; various mixtures of a selected AC were incorporated with the design of porous asphalt concrete (PAC) to produce PRP, and the PRP formulations were tested to ensure that they comply with the required specifications; qualified specimens were subsequently tested to determine their adsorption capacity for BTEX in aqueous solution, as compared to conventional PAC. The PRP08 and PRP16 samples, named for the design formulations of 0.8% and 1.6% of AC (by wt. in the formulation), exhibited low asphalt drain-down and low abrasion loss and also met all regulated specifications. The BTEX adsorption capacity measurements of PRP08 and PRP16 were 33-46%, 36-51%, 20-22%, and 6-8% respectively, higher than those obtained from PACs. Based on the test results, PRPs showed good physical performance and adsorption and may be considered as a potential method for controlling the transport of NPS vehicle pollutants. Copyright © 2017 Elsevier Ltd. All rights reserved.

Sulfur-infiltrated porous carbon microspheres with controllable multi-modal pore size distribution for high energy lithium-sulfur batteries

NASA Astrophysics Data System (ADS)

Zhao, Cunyu; Liu, Lianjun; Zhao, Huilei; Krall, Andy; Wen, Zhenhai; Chen, Junhong; Hurley, Patrick; Jiang, Junwei; Li, Ying

2013-12-01

Sulfur has received increasing attention as a cathode material for lithium-sulfur (Li-S) batteries due to its high theoretical specific capacity. However, the commercialization of Li-S batteries is limited by the challenges of poor electrical conductivity of sulfur, dissolution of the polysulfide intermediates into the electrolyte, and volume expansion of sulfur during cycling. Herein, we report the fabrication of novel-structured porous carbon microspheres with a controllable multi-modal pore size distribution, i.e., a combination of interconnected micropores, mesopores and macropores. Cathodes made of sulfur infiltrated in such a hierarchical carbon framework provide several advantages: (1) a continuous and high surface area carbon network for enhanced electrical conductivity and high sulfur loading; (2) macropores and large mesopores bridged by small mesopores to provide good electrolyte accessibility and fast Li ion transport and to accommodate volume expansion of sulfur; and (3) small mesopores and micropores to improve carbon/sulfur interaction and to help trap polysulfides. An initial discharge capacity at 1278 mA h g-1 and capacity retention at 70.7% (904 mA h g-1) after 100 cycles at a high rate (1 C) were achieved. The material fabrication process is relatively simple and easily scalable.Sulfur has received increasing attention as a cathode material for lithium-sulfur (Li-S) batteries due to its high theoretical specific capacity. However, the commercialization of Li-S batteries is limited by the challenges of poor electrical conductivity of sulfur, dissolution of the polysulfide intermediates into the electrolyte, and volume expansion of sulfur during cycling. Herein, we report the fabrication of novel-structured porous carbon microspheres with a controllable multi-modal pore size distribution, i.e., a combination of interconnected micropores, mesopores and macropores. Cathodes made of sulfur infiltrated in such a hierarchical carbon framework provide several advantages: (1) a continuous and high surface area carbon network for enhanced electrical conductivity and high sulfur loading; (2) macropores and large mesopores bridged by small mesopores to provide good electrolyte accessibility and fast Li ion transport and to accommodate volume expansion of sulfur; and (3) small mesopores and micropores to improve carbon/sulfur interaction and to help trap polysulfides. An initial discharge capacity at 1278 mA h g-1 and capacity retention at 70.7% (904 mA h g-1) after 100 cycles at a high rate (1 C) were achieved. The material fabrication process is relatively simple and easily scalable. Electronic supplementary information (ESI) available: Preparation process scheme; X-ray mapping images and EDX analysis for the surface of PMC/S-40; X-ray mapping images for the cross-section of PMC/S-40; thermogravimetric analysis (TGA) of PMC/S samples; T-plot results for PMC sample; and electrochemical measurements of lithium-sulfur batteries using PMC/S as cathode materials. See DOI: 10.1039/c3nr04532c

Low-cost carbon-silicon nanocomposite anodes for lithium ion batteries.

PubMed

Badi, Nacer; Erra, Abhinay Reddy; Hernandez, Francisco C Robles; Okonkwo, Anderson O; Hobosyan, Mkhitar; Martirosyan, Karen S

2014-01-01

The specific energy of the existing lithium ion battery cells is limited because intercalation electrodes made of activated carbon (AC) materials have limited lithium ion storage capacities. Carbon nanotubes, graphene, and carbon nanofibers are the most sought alternatives to replace AC materials but their synthesis cost makes them highly prohibitive. Silicon has recently emerged as a strong candidate to replace existing graphite anodes due to its inherently large specific capacity and low working potential. However, pure silicon electrodes have shown poor mechanical integrity due to the dramatic expansion of the material during battery operation. This results in high irreversible capacity and short cycle life. We report on the synthesis and use of carbon and hybrid carbon-silicon nanostructures made by a simplified thermo-mechanical milling process to produce low-cost high-energy lithium ion battery anodes. Our work is based on an abundant, cost-effective, and easy-to-launch source of carbon soot having amorphous nature in combination with scrap silicon with crystalline nature. The carbon soot is transformed in situ into graphene and graphitic carbon during mechanical milling leading to superior elastic properties. Micro-Raman mapping shows a well-dispersed microstructure for both carbon and silicon. The fabricated composites are used for battery anodes, and the results are compared with commercial anodes from MTI Corporation. The anodes are integrated in batteries and tested; the results are compared to those seen in commercial batteries. For quick laboratory assessment, all electrochemical cells were fabricated under available environment conditions and they were tested at room temperature. Initial electrochemical analysis results on specific capacity, efficiency, and cyclability in comparison to currently available AC counterpart are promising to advance cost-effective commercial lithium ion battery technology. The electrochemical performance observed for carbon soot material is very interesting given the fact that its production cost is away cheaper than activated carbon. The cost of activated carbon is about $15/kg whereas the cost to manufacture carbon soot as a by-product from large-scale milling of abundant graphite is about $1/kg. Additionally, here, we propose a method that is environmentally friendly with strong potential for industrialization.

Low-cost carbon-silicon nanocomposite anodes for lithium ion batteries

PubMed Central

2014-01-01

The specific energy of the existing lithium ion battery cells is limited because intercalation electrodes made of activated carbon (AC) materials have limited lithium ion storage capacities. Carbon nanotubes, graphene, and carbon nanofibers are the most sought alternatives to replace AC materials but their synthesis cost makes them highly prohibitive. Silicon has recently emerged as a strong candidate to replace existing graphite anodes due to its inherently large specific capacity and low working potential. However, pure silicon electrodes have shown poor mechanical integrity due to the dramatic expansion of the material during battery operation. This results in high irreversible capacity and short cycle life. We report on the synthesis and use of carbon and hybrid carbon-silicon nanostructures made by a simplified thermo-mechanical milling process to produce low-cost high-energy lithium ion battery anodes. Our work is based on an abundant, cost-effective, and easy-to-launch source of carbon soot having amorphous nature in combination with scrap silicon with crystalline nature. The carbon soot is transformed in situ into graphene and graphitic carbon during mechanical milling leading to superior elastic properties. Micro-Raman mapping shows a well-dispersed microstructure for both carbon and silicon. The fabricated composites are used for battery anodes, and the results are compared with commercial anodes from MTI Corporation. The anodes are integrated in batteries and tested; the results are compared to those seen in commercial batteries. For quick laboratory assessment, all electrochemical cells were fabricated under available environment conditions and they were tested at room temperature. Initial electrochemical analysis results on specific capacity, efficiency, and cyclability in comparison to currently available AC counterpart are promising to advance cost-effective commercial lithium ion battery technology. The electrochemical performance observed for carbon soot material is very interesting given the fact that its production cost is away cheaper than activated carbon. The cost of activated carbon is about $15/kg whereas the cost to manufacture carbon soot as a by-product from large-scale milling of abundant graphite is about $1/kg. Additionally, here, we propose a method that is environmentally friendly with strong potential for industrialization. PMID:25114651

Evaluating investment in quality improvement capacity building: a systematic review

PubMed Central

Mery, Gustavo; Dobrow, Mark J; Baker, G Ross; Im, Jennifer; Brown, Adalsteinn

2017-01-01

Purpose Leading health systems have invested in substantial quality improvement (QI) capacity building, but little is known about the aggregate effect of these investments at the health system level. We conducted a systematic review to identify key steps and elements that should be considered for system-level evaluations of investment in QI capacity building. Methods We searched for evaluations of QI capacity building and evaluations of QI training programmes. We included the most relevant indexed databases in the field and a strategic search of the grey literature. The latter included direct electronic scanning of 85 relevant government and institutional websites internationally. Data were extracted regarding evaluation design and common assessment themes and components. Results 48 articles met the inclusion criteria. 46 articles described initiative-level non-economic evaluations of QI capacity building/training, while 2 studies included economic evaluations of QI capacity building/training, also at the initiative level. No system-level QI capacity building/training evaluations were found. We identified 17 evaluation components that fit within 5 overarching dimensions (characteristics of QI training; characteristics of QI activity; individual capacity; organisational capacity and impact) that should be considered in evaluations of QI capacity building. 8 key steps in return-on-investment (ROI) assessments in QI capacity building were identified: (1) planning—stakeholder perspective; (2) planning—temporal perspective; (3) identifying costs; (4) identifying benefits; (5) identifying intangible benefits that will not be included in the ROI estimation; (6) discerning attribution; (7) ROI calculations; (8) sensitivity analysis. Conclusions The literature on QI capacity building evaluation is limited in the number and scope of studies. Our findings, summarised in a Framework to Guide Evaluations of QI Capacity Building, can be used to start closing this knowledge gap. PMID:28219957

Enhancing Earth Observation Capacity in the Himalayan Region

NASA Astrophysics Data System (ADS)

Shrestha, B. R.

2012-12-01

Earth observations bear special significance in the Himalayan Region owing to the fact that routine data collections are often hampered by highly inaccessible terrain and harsh climatic conditions. The ongoing rapid environmental changes have further emphasized its relevance and use for informed decision-making. The International Center for Integrated Mountain Development (ICIMOD), with a regional mandate is promoting the use of earth observations in line with the GEOSS societal benefit areas. ICIMOD has a proven track record to utilize earth observations notably in the areas of understanding glaciers and snow dynamics, disaster risk preparedness and emergency response, carbon estimation for community forestry user groups, land cover change assessment, agriculture monitoring and food security analysis among others. This paper presents the challenges and lessons learned as a part of capacity building of ICIMOD to utilize earth observations with the primary objectives to empower its member countries and foster regional cooperation. As a part of capacity building, ICIMOD continues to make its efforts to augment as a regional resource center on earth observation and geospatial applications for sustainable mountain development. Capacity building possesses multitude of challenges in the region: the complex geo-political reality with differentiated capacities of member states, poorer institutional and technical infrastructure; addressing the needs for multiple user and target groups; integration with different thematic disciplines; and high resources intensity and sustainability. A capacity building framework was developed based on detailed needs assessment with a regional approach and strategy to enhance capability of ICIMOD and its network of national partners. A specialized one-week training course and curriculum have been designed for different thematic areas to impart knowledge and skills that include development practitioners, professionals, researchers and scientists. These courses include relevant theoretical lectures on the specific themes and extensive hands-on exercises using remote sensing and GIS tools and techniques. A one-day policy workshop has been designed to raise awareness among managers and decision-makers. Within the framework of SERVIR-Himalaya, a specialized training and awareness course has been initiated targeting to the youth. This course focuses on utilizing earth observation to sensitize youth and help them better understand climate change in the Himalayas. Furthermore, ICIMOD is strengthening existing partnerships and developing new partnerships to keep pace with rapidly changing technological advancements in order to customize the capacity building needs for the region. ICIMOD is promoting the Himalayan University consortium to extend its capacity building efforts for a longer-term continuity and sustainability. Through the SERVIR-Himalaya initiative, it is aiming to build new capacity building components such as - NASA DEVELOP to engage student research, MYCOE programs for youth, and small grants programs for young researchers and professionals. As a regional center, ICIMOD wants to continue to build regional capacity with the ultimate goal to leverage geospatial information services for the societal benefits to the mountain communities and relevant stakeholders.

Study on the Structures of Two Booster Pellets Having High Initiation Capacity

NASA Astrophysics Data System (ADS)

Shuang-Qi, Hu; Hong-Rong, Liu; Li-shuang, Hu; Xiong, Cao; Xiang-Chao, Mi; Hai-Xia, Zhao

2014-05-01

Insensitive munitions (IM) improve the survivability of both weapons and their associated platforms, which can lead to a reduction in casualties, mission losses, and whole life costs. All weapon systems contain an explosive train that needs to meet IM criteria but reliably initiate a main charge explosive. To ensure that these diametrically opposed requirements can be achieved, new highly effective booster charge structures were designed. The initiation capacity of the two booster pellets was studied using varied composition and axial-steel-dent methods. The results showed that the two new booster pellets can initiate standard main charge pellets with less explosive mass than the ordinary cylindrical booster pellet. The numerical simulation results were in good agreement with the experiment results.

In situ preparation of MgCo2O4 nanosheets on Ni-foam as a binder-free electrode for high performance hybrid supercapacitors.

PubMed

Vijayakumar, Subbukalai; Nagamuthu, Sadayappan; Ryu, Kwang-Sun

2018-05-15

A binder-free, MgCo2O4 nanosheet-like architecture was prepared on Ni-foam using a hydrothermal method. MgCo2O4/Ni-foam was characterized by X-ray diffraction, field emission scanning electron microscopy (FESEM), and transmission electron microscopy techniques. The FESEM image revealed a nanosheet array-like architecture. The MgCo2O4 nanosheets grown on Ni-foam exhibited the maximum specific capacity of 947 C g-1 at a specific current of 2 A g-1. Approximately 96% of the specific capacity was retained from the maximum specific capacity after 5000 continuous charge-discharge cycles. This hybrid device exhibited a maximum specific capacity of 52 C g-1 at a specific current of 0.5 A g-1, and also exhibited a maximum specific energy of 12.99 W h kg-1 at a specific power of 448.7 W kg-1. These results confirmed that the binder-free MgCo2O4 nanosheets grown on Ni-foam are a suitable positive electrode material for hybrid supercapacitors.

Biodiversity of mannose-specific adhesion in Lactobacillus plantarum revisited: strain-specific domain composition of the mannose-adhesin.

PubMed

Gross, G; Snel, J; Boekhorst, J; Smits, M A; Kleerebezem, M

2010-03-01

Recently, we have identified the mannose-specific adhesin encoding gene (msa) of Lactobacillus plantarum. In the current study, structure and function of this potentially probiotic effector gene were further investigated, exploring genetic diversity of msa in L. plantarum in relation to mannose adhesion capacity. The results demonstrate that there is considerable variation in quantitative in vitro mannose adhesion capacity, which is paralleled by msa gene sequence variation. The msa genes of different L. plantarum strains encode proteins with variable domain composition. Construction of L. plantarum 299v mutant strains revealed that the msa gene product is the key-protein for mannose adhesion, also in a strain with high mannose adhering capacity. However, no straightforward correlation between adhesion capacity and domain composition of Msa in L. plantarum could be identified. Nevertheless, differences in Msa sequences in combination with variable genetic background of specific bacterial strains appears to determine mannose adhesion capacity and potentially affects probiotic properties. These findings exemplify the strain-specificity of probiotic characteristics and illustrate the need for careful and molecular selection of new candidate probiotics.

Multipeak low-temperature behavior of specific heat capacity in frustrated magnetic systems: An exact theoretical analysis

NASA Astrophysics Data System (ADS)

Jurčišinová, E.; Jurčišin, M.

2018-05-01

We investigate in detail the process of formation of the multipeak low-temperature structure in the behavior of the specific heat capacity in frustrated magnetic systems in the framework of the exactly solvable antiferromagnetic spin-1 /2 Ising model with the multisite interaction in the presence of the external magnetic field on the kagome-like Husimi lattice. The behavior of the entropy of the model is studied and exact values of the residual entropies of all ground states are found. It is shown that the multipeak structure in the behavior of the specific heat capacity is related to the formation of the multilevel hierarchical ordering in the system of all ground states of the model. Direct relation between the maximal number of peaks in the specific heat capacity behavior and the number of independent interactions in studied frustrated magnetic system is identified. The mechanism of the formation of the multipeak structure in the specific heat capacity is described and studied in detail, and it is generalized to frustrated magnetic systems with arbitrary numbers of independent interactions.

CSTI high capacity power. [Civil Space Technology Initiative

NASA Technical Reports Server (NTRS)

Winter, Jerry M.

1989-01-01

In FY-88, the Advanced Technology Program was incorporated into NASA's Civil Space Technology Initiative (CSTI). The CSTI Program was established to provide the foundation for technology development in automation and robotics, information, propulsion, and power. The CSTI High Capacity Power Program builds on the technology efforts of the SP-100 program, incorporates the previous NASA SP-100 Advanced Technology project, and provides a bridge to NASA Project Pathfinder. The elements of CSTI High Capacity Power development include Converrsion Systems, Thermal Management, Power Management, System Diagnostics, and Environmental Interactions. Technology advancement in all areas, including materials, is required to assure the high reliability and 7 to 10 year lifetime demanded for future space nuclear power systems.

Strain measurement based battery testing

DOEpatents

Xu, Jeff Qiang; Steiber, Joe; Wall, Craig M.; Smith, Robert; Ng, Cheuk

2017-05-23

A method and system for strain-based estimation of the state of health of a battery, from an initial state to an aged state, is provided. A strain gauge is applied to the battery. A first strain measurement is performed on the battery, using the strain gauge, at a selected charge capacity of the battery and at the initial state of the battery. A second strain measurement is performed on the battery, using the strain gauge, at the selected charge capacity of the battery and at the aged state of the battery. The capacity degradation of the battery is estimated as the difference between the first and second strain measurements divided by the first strain measurement.

A Systematic Approach to Capacity Strengthening of Laboratory Systems for Control of Neglected Tropical Diseases in Ghana, Kenya, Malawi and Sri Lanka

PubMed Central

Njelesani, Janet; Dacombe, Russell; Palmer, Tanith; Smith, Helen; Koudou, Benjamin; Bockarie, Moses; Bates, Imelda

2014-01-01

Background The lack of capacity in laboratory systems is a major barrier to achieving the aims of the London Declaration (2012) on neglected tropical diseases (NTDs). To counter this, capacity strengthening initiatives have been carried out in NTD laboratories worldwide. Many of these initiatives focus on individuals' skills or institutional processes and structures ignoring the crucial interactions between the laboratory and the wider national and international context. Furthermore, rigorous methods to assess these initiatives once they have been implemented are scarce. To address these gaps we developed a set of assessment and monitoring tools that can be used to determine the capacities required and achieved by laboratory systems at the individual, organizational, and national/international levels to support the control of NTDs. Methodology and principal findings We developed a set of qualitative and quantitative assessment and monitoring tools based on published evidence on optimal laboratory capacity. We implemented the tools with laboratory managers in Ghana, Malawi, Kenya, and Sri Lanka. Using the tools enabled us to identify strengths and gaps in the laboratory systems from the following perspectives: laboratory quality benchmarked against ISO 15189 standards, the potential for the laboratories to provide support to national and regional NTD control programmes, and the laboratory's position within relevant national and international networks and collaborations. Conclusion We have developed a set of mixed methods assessment and monitoring tools based on evidence derived from the components needed to strengthen the capacity of laboratory systems to control NTDs. Our tools help to systematically assess and monitor individual, organizational, and wider system level capacity of laboratory systems for NTD control and can be applied in different country contexts. PMID:24603407

Developing the Capacity of Australian Secondary Schools to Cater for Students with High Support Needs in Mental Health and Wellbeing: An Effective School Case Management Resource

ERIC Educational Resources Information Center

De Jong, Terry; Griffiths, Coosje

2008-01-01

MindMatters Plus is a mental health promotion initiative in Australia which aims to improve the capacity of secondary schools to cater for students who have high support needs in the area of mental health. The development of effective school case management was one of the projects associated with this initiative. The aim of this project was to…

Investigation of Metal Oxide/Carbon Nano Material as Anode for High Capacity Lithium-ion Cells

NASA Technical Reports Server (NTRS)

Wu, James Jianjun; Hong, Haiping

2014-01-01

NASA is developing high specific energy and high specific capacity lithium-ion battery (LIB) technology for future NASA missions. Current state-of-art LIBs have issues in terms of safety and thermal stability, and are reaching limits in specific energy capability based on the electrochemical materials selected. For example, the graphite anode has a limited capability to store Li since the theoretical capacity of graphite is 372 mAh/g. To achieve higher specific capacity and energy density, and to improve safety for current LIBs, alternative advanced anode, cathode, and electrolyte materials are pursued under the NASA Advanced Space Power System Project. In this study, the nanostructed metal oxide, such as Fe2O3 on carbon nanotubes (CNT) composite as an LIB anode has been investigated.

The temporal evolution of electromagnetic markers sensitive to the capacity limits of visual short-term memory.

PubMed

Mitchell, Daniel J; Cusack, Rhodri

2011-01-01

An electroencephalographic (EEG) marker of the limited contents of human visual short-term memory (VSTM) has previously been described. Termed contralateral delay activity, this consists of a sustained, posterior, negative potential that correlates with memory load and is greatest contralateral to the remembered hemifield. The current investigation replicates this finding and uses magnetoencephalography (MEG) to characterize its magnetic counterparts and their neural generators as they evolve throughout the memory delay. A parametric manipulation of memory load, within and beyond capacity limits, allows separation of signals that asymptote with behavioral VSTM performance from additional responses that contribute to a linear increase with set-size. Both EEG and MEG yielded bilateral signals that track the number of objects held in memory, and contralateral signals that are independent of memory load. In MEG, unlike EEG, the contralateral interaction between hemisphere and item load is much weaker, suggesting that bilateral and contralateral markers of memory load reflect distinct sources to which EEG and MEG are differentially sensitive. Nonetheless, source estimation allowed both the bilateral and the weaker contralateral capacity-limited responses to be localized, along with a load-independent contralateral signal. Sources of global and hemisphere-specific signals all localized to the posterior intraparietal sulcus during the early delay. However the bilateral load response peaked earlier and its generators shifted later in the delay. Therefore the hemifield-specific response may be more closely tied to memory maintenance while the global load response may be involved in initial processing of a limited number of attended objects, such as their individuation or consolidation into memory.

Tuning Electrochemical Properties of Li-Rich Layered Oxide Cathodes by Adjusting Co/Ni Ratios and Mechanism Investigation Using in situ X-ray Diffraction and Online Continuous Flow Differential Electrochemical Mass Spectrometry.

PubMed

Shen, ShouYu; Hong, YuHao; Zhu, FuChun; Cao, ZhenMing; Li, YuYang; Ke, FuSheng; Fan, JingJing; Zhou, LiLi; Wu, LiNa; Dai, Peng; Cai, MingZhi; Huang, Ling; Zhou, ZhiYou; Li, JunTao; Wu, QiHui; Sun, ShiGang

2018-04-18

Owing to high specific capacity of ∼250 mA h g -1 , lithium-rich layered oxide cathode materials (Li 1+ x Ni y Co z Mn (3- x-2 y-3 z)/4 O 2 ) have been considered as one of the most promising candidates for the next-generation cathode materials of lithium ion batteries. However, the commercialization of this kind of cathode materials seriously restricted by voltage decay upon cycling though Li-rich materials with high cobalt content have been widely studied and show good capacity. This research successfully suppresses voltage decay upon cycling while maintaining high specific capacity with low Co/Ni ratio in Li-rich cathode materials. Online continuous flow differential electrochemical mass spectrometry (OEMS) and in situ X-ray diffraction (XRD) techniques have been applied to investigate the structure transformation of Li-rich layered oxide materials during charge-discharge process. The results of OEMS revealed that low Co/Ni ratio lithium-rich layered oxide cathode materials released no lattice oxygen at the first charge process, which will lead to the suppression of the voltage decay upon cycling. The in situ XRD results displayed the structure transition of lithium-rich layered oxide cathode materials during the charge-discharge process. The Li 1.13 Ni 0.275 Mn 0.580 O 2 cathode material exhibited a high initial medium discharge voltage of 3.710 and a 3.586 V medium discharge voltage with the lower voltage decay of 0.124 V after 100 cycles.

The Plus 50 Initiative Evaluation: Initiative Impact

ERIC Educational Resources Information Center

American Association of Community Colleges (NJ1), 2012

2012-01-01

The American Association of Community Colleges (AACC), with funding from The Atlantic Philanthropies, created the Plus 50 Initiative (2008-2012). This initiative was designed to build the capacity of community colleges nationwide to develop programming that engages the plus 50 learner. This report contains: (1) An overview of the Plus 50…

Development of a Micro-Fiber Nickel Electrode for Nickel-Hydrogen Cell

NASA Technical Reports Server (NTRS)

Britton, Doris L.

1996-01-01

The development of a high specific energy battery is one of the objectives of the lightweight nickel-hydrogen (NiH2) program at the NASA Lewis Research Center. The approach has been to improve the nickel electrode by continuing combined in-house and contract efforts to develop a more efficient and lighter weight electrode for the nickel-hydrogen fuel cell. Small fiber diameter nickel plaques are used as conductive supports for the nickel hydroxide active material. These plaques are commercial products and have an advantage of increased surface area available for the deposition of active materials. Initial tests include activation and capacity measurements at different discharge levels followed by half-cell cycle testing at 80 percent depth-of-discharge in a low Earth orbit regime. The electrodes that pass the initial tests are life cycle tested in a boiler plate nickel-hydrogen cell before flightweight designs are built and tested.

Development of a micro-fiber nickel electrode for nickel-hydrogen cell

NASA Technical Reports Server (NTRS)

Britton, Doris L.

1995-01-01

Development of a high specific energy nickel electrode is the main goal of the lightweight nickel electrode program at the NASA Lewis Research Center. The approach has been to improve the nickel electrode by continuing combined in-house and contract efforts to develop a more efficient and lighter weight electrode for the nickel-hydrogen cell. Small fiber diameter nickel plaques are used as conductive supports for the nickel hydroxide active material. These plaques are commercial products and have an advantage of increased surface area available for the deposition of active material. Initial tests include activation and capacity measurements at different discharge levels followed by half-cell cycle testing at 80 percent depth-of-discharge in a low-Earth-orbit regime. The electrodes that pass the initial tests are life cycle-tested in a boiler plate nickel-hydrogen cell before flightweight designs are built and tested.

3500-hour durability testing of ceramic materials for automotive gas turbine engines

NASA Technical Reports Server (NTRS)

Carruthers, W. D.; Richerson, D. W.; Benn, K. W.

1980-01-01

A two-year durability program was performed by AiResearch Phoenix to evaluate four commercially available ceramic materials under simulated automotive gas turbine combustor discharge conditions. These conditions included extended cyclic thermal exposures up to 2500 F and 3500 hr. The four materials selected for evaluation were Norton NCX-34 hot pressed silicon nitride, AiResearch RBN 101 reaction bonded silicon nitride, Carborundum pressureless sintered alpha-SiC and Pure Carbon Co. (British Nuclear Fuels, Ltd.) Refel reaction sintered silicon carbide. These materials were initially exposed to 350 hr/1750 cycles at 1200 and 1370 C. Subsequent exposures to 1050, 2100 and 3500 hr were performed on those materials maintaining 50% of baseline strength after the initial exposure. Additional evaluations of exposed bars included dimensional and weight changes, dye penetrant, specific damping capacity changes, SEM fractography, and X-ray diffraction.

Modeling Tool for Decision Support during Early Days of an Anthrax Event.

PubMed

Rainisch, Gabriel; Meltzer, Martin I; Shadomy, Sean; Bower, William A; Hupert, Nathaniel

2017-01-01

Health officials lack field-implementable tools for forecasting the effects that a large-scale release of Bacillus anthracis spores would have on public health and hospitals. We created a modeling tool (combining inhalational anthrax caseload projections based on initial case reports, effects of variable postexposure prophylaxis campaigns, and healthcare facility surge capacity requirements) to project hospitalizations and casualties from a newly detected inhalation anthrax event, and we examined the consequences of intervention choices. With only 3 days of case counts, the model can predict final attack sizes for simulated Sverdlovsk-like events (1979 USSR) with sufficient accuracy for decision making and confirms the value of early postexposure prophylaxis initiation. According to a baseline scenario, hospital treatment volume peaks 15 days after exposure, deaths peak earlier (day 5), and recovery peaks later (day 23). This tool gives public health, hospital, and emergency planners scenario-specific information for developing quantitative response plans for this threat.

Sex Differences in Concomitant Trajectories of Self-Reported Disability and Measured Physical Capacity in Older Adults

PubMed Central

Allore, Heather G.; Mendes de Leon, Carlos F.; Gahbauer, Evelyne A.; Gill, Thomas M.

2016-01-01

Background: Despite documented age-related declines in self-reported functional status and measured physical capacity, it is unclear whether these functional indicators follow similar trajectories over time or whether the patterns of change differ by sex. Methods: We used longitudinal data from 687 initially nondisabled adults, aged 70 or older, from the Precipitating Events Project, who were evaluated every 18 months for nearly 14 years. Self-reported disability was assessed with a 12-item disability scale. Physical capacity was measured using grip strength and a modified version of Short Physical Performance Battery. Hierarchical linear models estimated the intra-individual trajectory of each functional indicator and differences in trajectories’ intercept and slope by sex. Results: Self-reported disability, grip strength, and Short Physical Performance Battery score declined over 13.5 years following nonlinear trajectories. Women experienced faster accumulation of self-reported disability, but slower declines in measured physical capacity, compared with men. Trajectory intercepts revealed that women had significantly weaker grip strength and reported higher levels of disability compared with men, with no differences in starting Short Physical Performance Battery scores. These findings were robust to adjustments for differences in sociodemographic characteristics, length-of-survival, health risk factors, and chronic-disease status. Conclusions: Despite the female disadvantage in self-reported disability, older women preserve measured physical capacity better than men over time. Self-reported and measured indicators should be viewed as complementary rather than interchangeable assessments of functional status for both clinical and research purposes, especially for sex-specific comparisons. PMID:27071781

Acid-base treated vermiculite as high performance adsorbent: Insights into the mechanism of cationic dyes adsorption, regeneration, recyclability and stability studies.

PubMed

Stawiński, Wojciech; Węgrzyn, Agnieszka; Dańko, Tomasz; Freitas, Olga; Figueiredo, Sónia; Chmielarz, Lucjan

2017-04-01

Additional treatment with NaOH of acid activated vermiculite results in even higher increase in the adsorption capacity in comparison to samples modified only in acidic solution (first step of activation) with respect to raw material. Optimization of treatment conditions and adsorption capacity for two cationic dyes (methylene blue (MB) and astrazon red (AR)), also as binary mixture, was evaluated. The capacity, based on column studies, increased from 48 ± 2 to 203 ± 4 mg g -1 in the case of methylene blue and from 51 ± 1 to 127 ± 2 mg g -1 in the case of astrazon red on starting and acid-base treated material, respectively. It was shown that adsorption mechanism changes for both cationic dyes after NaOH treatment and it results in decrease of adsorption rate. In binary mixtures methylene blue is bound stronger by adsorbent and astrazon red may be removed in initial stage of adsorption. Extensive studies on desorption/regeneration process proved high efficiency in recyclable use of all materials. Although cation exchange capacity decreases due to acid treatment, after base treatment exchange properties are used more efficiently. On the other hand, increased specific surface area has less significant contribution into the adsorption potential of studied materials. Obtained adsorbents worked efficiently in 7 adsorption-regeneration cycles and loss of adsorption capacity was observed only in two first cycles. Copyright © 2017 Elsevier Ltd. All rights reserved.

Fostering Earth Observation Regional Networks - Integrative and iterative approaches to capacity building

NASA Astrophysics Data System (ADS)

Habtezion, S.

2015-12-01

Fostering Earth Observation Regional Networks - Integrative and iterative approaches to capacity building Fostering Earth Observation Regional Networks - Integrative and iterative approaches to capacity building Senay Habtezion (shabtezion@start.org) / Hassan Virji (hvirji@start.org)Global Change SySTem for Analysis, Training and Research (START) (www.start.org) 2000 Florida Avenue NW, Suite 200 Washington, DC 20009 USA As part of the Global Observation of Forest and Land Cover Dynamics (GOFC-GOLD) project partnership effort to promote use of earth observations in advancing scientific knowledge, START works to bridge capacity needs related to earth observations (EOs) and their applications in the developing world. GOFC-GOLD regional networks, fostered through the support of regional and thematic workshops, have been successful in (1) enabling participation of scientists for developing countries and from the US to collaborate on key GOFC-GOLD and Land Cover and Land Use Change (LCLUC) issues, including NASA Global Data Set validation and (2) training young developing country scientists to gain key skills in EOs data management and analysis. Members of the regional networks are also engaged and reengaged in other EOs programs (e.g. visiting scientists program; data initiative fellowship programs at the USGS EROS Center and Boston University), which has helped strengthen these networks. The presentation draws from these experiences in advocating for integrative and iterative approaches to capacity building through the lens of the GOFC-GOLD partnership effort. Specifically, this presentation describes the role of the GODC-GOLD partnership in nurturing organic networks of scientists and EOs practitioners in Asia, Africa, Eastern Europe and Latin America.

Measuring primary care organizational capacity for diabetes care coordination: the Diabetes Care Coordination Readiness Assessment.

PubMed

Weeks, Douglas L; Polello, Jennifer M; Hansen, Daniel T; Keeney, Benjamin J; Conrad, Douglas A

2014-01-01

Not all primary care clinics are prepared to implement care coordination services for chronic conditions, such as diabetes. Understanding true capacity to coordinate care is an important first-step toward establishing effective and efficient care coordination. Yet, we could identify no diabetes-specific instruments to systematically assess readiness and/or status of primary care clinics to engage in diabetes care coordination. This report describes the development and initial validation of the Diabetes Care Coordination Readiness Assessment (DCCRA), which is intended to measure primary care clinic readiness to coordinate care for adult patients with diabetes. The instrument was developed through iterative item generation within a framework of five domains of care coordination: Organizational Capacity, Care Coordination, Clinical Management, Quality Improvement, and Technical Infrastructure. Validation data was collected on 39 primary care clinics. Content validity, inter-rater reliability, internal consistency, and construct validity of the 49-item instrument were assessed. Inter-rater agreement indices per item ranged from 0.50 to 1.0. Cronbach's alpha of the entire instrument was 0.964, and for the five domain scales ranged from 0.688 to 0.961. Clinics with existing care coordinators were rated as more ready to support care coordination than clinics without care coordinators for the entire DCCRA and for each domain, supporting construct validity. As providers increasingly attempt to adopt patient-centered approaches, introduction of the DCCRA is timely and appropriate for assisting clinics with identifying gaps in provision of care coordination services. The DCCRA's strengths include promising psychometric properties. A valid measure of diabetes care coordination readiness should be useful in diabetes program evaluation, assistance with quality improvement initiatives, and measurement of patient-centered care in research.

Preliminary investigation of phosphorus adsorption onto two types of iron oxide-organic matter complexes.

PubMed

Yan, Jinlong; Jiang, Tao; Yao, Ying; Lu, Song; Wang, Qilei; Wei, Shiqiang

2016-04-01

Iron oxide (FeO) coated by natural organic matter (NOM) is ubiquitous. The associations of minerals with organic matter (OM) significantly changes their surface properties and reactivity, and thus affect the environmental fate of pollutants, including nutrients (e.g., phosphorus (P)). In this study, ferrihydrite/goethite-humic acid (FH/GE-HA) complexes were prepared and their adsorption characteristics on P at various pH and ionic strength were investigated. The results indicated that the FeO-OM complexes showed a decreased P adsorption capacity in comparison with bare FeO. The maximum adsorption capacity (Qmax) decreased in the order of FH (22.17 mg/g)>FH-HA (5.43 mg/g)>GE (4.67 mg/g)>GE-HA (3.27 mg/g). After coating with HA, the amorphous FH-HA complex still showed higher P adsorption than the crystalline GE-HA complex. The decreased P adsorption observed might be attributed to changes of the FeO surface charges caused by OM association. The dependence of P adsorption on the specific surface area of adsorbents suggests that the FeO component in the complexes is still the main contributor for the adsorption surfaces. The P adsorptions on FeO-HA complexes decreased with increasing initial pH or decreasing initial ionic strength. A strong dependence of P adsorption on ionic strength and pH may demonstrate that outer-sphere complexes between the OM component on the surface and P possibly coexist with inner-sphere surface complexes between the FeO component and P. Therefore, previous over-emphasis on the contributions of original minerals to P immobilization possibly over-estimates the P loading capacity of soils, especially in humic-rich areas. Copyright © 2015. Published by Elsevier B.V.

Adsorption of proteins on γ-Fe2O3 and γ-Fe2O3/SiO2 magnetic materials

NASA Astrophysics Data System (ADS)

Khokhlova, T. D.

2017-10-01

γ-Fe2O3-SiO2 composites are synthesized via the coprecipitation of a γ-Fe2O3 magnetic carrier (with specific surface S = 17 m2/g and pore volume V = 0.51 cm3/g) and silicon dioxide from an aqueous glass (sodium silicate) solution. The effect coagulation agent NaCl has on the coprecipitation process and structural characteristics of the composite is discussed. Adding NaCl to the aqueous glass solution prevents the formation of SiO2 macrogel making it possible to obtain highly porous composites with high adsorption capacity for proteins cytochrome C and hemoglobin. It is established that a composite that is 50% SiO2 and produced with the addition of 5% NaCl ( S = 150 m2/g and V = 0.87 cm3/g) has a sixfold and twofold higher capacity (280 and 175 mg/g) for cytochrome C and hemoglobin, respectively, than the initial ferric oxide (45 and 82 mg/g). The capacity for cytochrome C and hemoglobin of a composite synthesized without NaCl ( S = 50 m2/g and V = 0.45 cm3/g) is 19 and 20 mg/g, respectively, which is twofold and fourfold lower than those of the initial γ-Fe2O3. The dependence of protein adsorption on pH and the ionic strength of a solution is studied, and the conditions for the maximum adsorption and complete desorption of proteins are established. It is concluded that composites synthesized with additions of NaCl can be used as magnetocontrollable sorbents for the purification, concentration, and immobilization of proteins, and for the preparation of biocatalysts based on immobilized enzymes.

Li- and Mn-Rich Cathode Materials: Challenges to Commercialization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zheng, Jianming; Myeong, Seungjun; Cho, Woongrae

2016-12-14

The lithium- and manganese-rich (LMR) layered structure cathode exhibit one of the highest specific energy (~900 Wh kg-1) among all the cathode materials. However, the practical applications of LMR cathodes are still hindered by several significant challenges including voltage fade, large initial capacity loss, poor rate capability and limited cycle life. Herein, we review the recent progresses and understandings on the application of LMR cathode materials from practical point of view. Several key parameters of LMR cathodes that affect the LMR/graphite full cell operation are systematically analysed. These factors include the first cycle capacity loss, voltage fade, powder tap density,more » electrode density of LMR based cathode etc. New approaches to minimize the detrimental effect of these factors are highlighted in this work. We also provided the perspectives for the future research on LMR cathode materials, focusing on addressing the fundamental problems of LMR cathodes while always keeping practical considerations in mind.« less

Letter Report for Characterization of Biochar

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amonette, James E.

2013-04-09

On 27 November 2012, a bulk biochar sample was received for characterization of selected physical and chemical properties. The main purpose of the characterization was to help determine the degree to which biochar would be suitable as a soil amendment to aid in growth of plants. Towards this end, analyses to determine specific surface, pH, cation-exchange capacity, water retention, and wettability (i.e. surface tension) were conducted. A second objective was to determine how uniform these properties were in the sample. Towards this end, the sample was separated into fractions based on initial particle size and on whether the material wasmore » from the external surface or the internal portion of the particle. Based on the results, the biochar has significant liming potentials, significant cation-retention capacities, and highly variable plant-available moisture retention properties that, under the most favorable circumstances, could be helpful to plants. As a consequence, it would be quite suitable for addition to acidic soils and should enhance the fertility of those soils.« less

Creating the Future: Changing Culture Through Leadership Capacity Development

NASA Astrophysics Data System (ADS)

Lefoe, Geraldine

Leadership for change is key to universities finding new ways to meet the needs of their future students. This chapter describes an innovative framework for leadership capacity development which has been implemented in a number of Australian universities. The framework, underpinned by a distributive approach to leadership, prepares a new generation of leaders for formal positions of leadership in all aspects of teaching and learning. The faculty scholars implemented projects, including a number of them using innovative technologies, to establish strategic change within their faculties. They shared their outcomes annually through national roundtables, which focussed on methods for improving assessment practice. Five critical factors for success are discussed including implemenation of strategic faculty-based projects; formal leadership training and related activities; opportunities for dialog about leadership practice and experiences; and activities that expanded current professional networks. The model can be adapted to have a specific focus on leadership for e-Learning, and some examples of faculty based strategic initiatives are described.

Enhanced electrochemical properties of LiFePO4 (LFP) cathode using the carboxymethyl cellulose lithium (CMC-Li) as novel binder in lithium-ion battery.

PubMed

Qiu, Lei; Shao, Ziqiang; Wang, Daxiong; Wang, Wenjun; Wang, Feijun; Wang, Jianquan

2014-10-13

Novel water-based binder CMC-Li is synthesized using cotton as raw material. The mechanism of the CMC-Li as a binder is reported. Electrochemical properties of batteries cathodes based on commercially available lithium iron phosphate (LiFePO4, LFP) and CMC-Li as a water-soluble binder are investigated. CMC-Li is a novel lithium-ion binder. Compare with conventional poly(vinylidene fluoride) (PVDF) binder, and the battery with CMC-Li as the binder retained 97.8% of initial reversible capacity after 200 cycles at 176 mAh g(-1), which is beyond the theoretical specific capacity of LFP. Constant current charge-discharge test results demonstrate that the LFP electrode using CMC-Li as the binder has the highest rate capability, follow closely by that using PVDF binder. The batteries have good electrochemical property, outstanding pollution-free and excellent stability. Copyright © 2014 Elsevier Ltd. All rights reserved.

Unpacking "Health Reform" and "Policy Capacity": Comment on "Health Reform Requires Policy Capacity".

PubMed

Legge, David; Gleeson, Deborah H

2015-07-20

Health reform is the outcome of dispersed policy initiatives in different sectors, at different levels and across time. Policy work which can drive coherent health reform needs to operate across the governance structures as well as the institutions that comprise healthcare systems. Building policy capacity to support health reform calls for clarity regarding the nature of such policy work and the elements of policy capacity involved; and for evidence regarding effective strategies for capacity building. © 2015 by Kerman University of Medical Sciences.

On the relationship between the specific heat enhancement of salt-based nanofluids and the ionic exchange capacity of nanoparticles.

PubMed

Mondragón, Rosa; Juliá, J Enrique; Cabedo, Luis; Navarrete, Nuria

2018-05-14

Nanoparticles have been used in thermal applications to increase the specific heat of the molten salts used in Concentrated Solar Power plants for thermal energy storage. Although several mechanisms for abnormal enhancement have been proposed, they are still being investigated and more research is necessary. However, this nanoparticle-salt interaction can also be found in chemical applications in which nanoparticles have proved suitable to be used as an adsorbent for nitrate removal given their high specific surface, reactivity and ionic exchange capacity. In this work, the ionic exchange capacity mechanism for the nanoparticles functionalization phenomenon was evaluated. The ionic exchange capacity of silica and alumina nanoparticles dispersed in lithium, sodium and potassium nitrates was measured. Fourier-transform infrared spectroscopy tests confirmed the adsorption of nitrate ions on the nanoparticle surface. A relationship between the ionic exchange capacity of nanoparticles and the specific heat enhancement of doped molten salts was proposed for the first time.

Methods and Apparatuses for Signaling with Geometric Constellations in a Raleigh Fading Channel

NASA Technical Reports Server (NTRS)

Barsoum, Maged F. (Inventor); Jones, Christopher R. (Inventor)

2017-01-01

Communication systems are described that use signal constellations, which have unequally spaced (i.e. `geometrically` shaped) points. In many embodiments, the communication systems use specific geometric constellations that are capacity optimized at a specific SNR, over the Raleigh fading channel. In addition, ranges within which the constellation points of a capacity optimized constellation can be perturbed and are still likely to achieve a given percentage of the optimal capacity increase compared to a constellation that maximizes d.sub.min, are also described. Capacity measures that are used in the selection of the location of constellation points include, but are not limited to, parallel decode (PD) capacity and joint capacity.

Methods and Apparatuses for Signaling with Geometric Constellations in a Raleigh Fading Channel

NASA Technical Reports Server (NTRS)

Jones, Christopher R. (Inventor); Barsoum, Maged F. (Inventor)

2015-01-01

Communication systems are described that use signal constellations, which have unequally spaced (i.e., `geometrically` shaped) points. In many embodiments, the communication systems use specific geometric constellations that are capacity optimized at a specific SNR (signal to noise ratio). In addition, ranges within which the constellation points of a capacity optimized constellation can be perturbed and are still likely to achieve a given percentage of the optimal capacity increase compared to a constellation that maximizes d (sub min) (i.e. minimum distance between constellations) are also described. Capacity measures that are used in the selection of the location of constellation points include, but are not limited to, parallel decode (PD) capacity and joint capacity.

GPR30: a seven-transmembrane-spanning estrogen receptor that triggers EGF release.

PubMed

Filardo, Edward J; Thomas, Peter

2005-10-01

Heterotrimeric G proteins and seven-transmembrane-spanning (7TM) receptors are implicated in rapid estrogen signaling. The orphan 7TM receptor GPR30 is linked to estrogen-mediated activation of adenylyl cyclase, release of epidermal growth factor (EGF)-related ligands, and specific estrogen binding. GPR30 acts independently of estrogen receptors, ERalpha and ERbeta, and probably functions as a heptahelical ER. 7TM receptors elicit signals that stimulate second messengers, and convey intracellular signals via EGF receptors. Identification of GPR30 as a Gs-coupled 7TM receptor that triggers release of heparin-binding EGF establishes its role in cell signaling cascades initiated by estrogens, and explains their capacity to activate second messengers and promote EGF-like effects. Thus, estrogen can signal by the same mechanism as various other hormones, through a specific 7TM receptor.

Facile synthesis of titanium (IV) ion immobilized adenosine triphosphate functionalized silica nanoparticles for highly specific enrichment and analysis of intact phosphoproteins.

PubMed

Wang, Hao; Tian, Zhixin

2018-06-06

Analysis of phosphoproteins always faces the challenge of low stoichiometry, which demands highly selective and efficient enrichment in the initial sample preparation. Here we report our synthesis of the novel titanium (IV) ion immobilized adenosine triphosphate functionalized silica nanoparticles (Ti 4+ -ATP-NPs) for efficient enrichment of intact phosphoproteins. The average diameter of Ti 4+ -ATP-NPs was about 128 nm with good dispersibility and the saturated adsorption capacity for β-casein was 1046.5 mg/g. In addition, Ti 4+ -ATP-NPs exhibited high specificity and selectivity in enriching phosphoproteins from both standard protein mixtures and complex biological samples (non-fat milk, chicken egg white and mouse heart tissue extract) as demonstrated by SDS-PAGE. Copyright © 2018 Elsevier B.V. All rights reserved.

Heavy metal removal by caustic-treated yeast immobilized in alginate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lu, Y.; Wilkins, E.

1995-12-31

Saccharomyces cerevisiae yeast biomass was treated with hot alkali to increase its biosorption capacity for heavy metals and then was immobilized in alginate gel. Biosorption capacities for Cu{sup 2+}, Cd{sup 2+}, and Zn{sup 2+} on alginate gel, native yeast, native yeast immobilized in alginate gel, and caustic-treated yeast immobilized in alginate gel were all compared. Immobilized yeasts could be reactivated and reused in a manner similar to the ion exchange resins. Immobilized caustic-treated yeast has high heavy metal biosorption capacity and high metal removal efficiency in a rather wide acidic pH region. The biosorption isotherm of immobilized caustic-treated yeast wasmore » studied, and empirical equations were obtained. The initial pH of polluted water affected the metal removal efficiency significantly, and the equilibrium biosorption capacity seemed to be temperature independent at lower initial metal concentrations.« less

Amine-functionalized PVA-co-PE nanofibrous membrane as affinity membrane with high adsorption capacity for bilirubin.

PubMed

Wang, Wenwen; Zhang, Hao; Zhang, Zhifeng; Luo, Mengying; Wang, Yuedan; Liu, Qiongzhen; Chen, Yuanli; Li, Mufang; Wang, Dong

2017-02-01

In this study, poly(vinyl alcohol-co-ethylene) (PVA-co-PE) nanofibrous membrane was activated by sodium hydroxide and cyanuric chloride, and then the activated membranes were functionalized by 1,3-propanediamine, hexamethylenediamine and diethylenetriamine to be affinity membranes for bilirubin removal, respectively. The chemical structures and morphologies of membranes were investigated by SEM, FTIR and XPS. And the adsorption ability of different amine-functionalized nanofibrous membranes for bilirubin was characterized. Furthermore, the effects of temperature, initial concentration of bilirubin, NaCl concentration and BSA concentration on the adsorption capacity for bilirubin of diethylenetriamine-functionalized nanofibrous membrane were studied. Results indicated that the adsorption capacity for bilirubin of diethylenetriamine-functionalized nanofibrous membrane could reach 85mg/g membrane when the initial bilirubin concentration was 200mg/L while the adsorption capacity could be increased to 110mg/g membrane if the initial bilirubin concentration was more than 400mg/L. The dynamic adsorption of diethylenetriamine-functionalized nanofibrous membrane showed that the ligands of amine groups on the membrane surface could be used as far as possible by recirculating the plasma with certain flow rates. Therefore, the diethylenetriamine-functionalized PVA-co-PE nanofibrous membrane possessed high adsorption capacity for bilirubin and it can be candidate as affinity membrane for bilirubin removal. Copyright © 2016. Published by Elsevier B.V.

Information extraction during simultaneous motion processing.

PubMed

Rideaux, Reuben; Edwards, Mark

2014-02-01

When confronted with multiple moving objects the visual system can process them in two stages: an initial stage in which a limited number of signals are processed in parallel (i.e. simultaneously) followed by a sequential stage. We previously demonstrated that during the simultaneous stage, observers could discriminate between presentations containing up to 5 vs. 6 spatially localized motion signals (Edwards & Rideaux, 2013). Here we investigate what information is actually extracted during the simultaneous stage and whether the simultaneous limit varies with the detail of information extracted. This was achieved by measuring the ability of observers to extract varied information from low detail, i.e. the number of signals presented, to high detail, i.e. the actual directions present and the direction of a specific element, during the simultaneous stage. The results indicate that the resolution of simultaneous processing varies as a function of the information which is extracted, i.e. as the information extraction becomes more detailed, from the number of moving elements to the direction of a specific element, the capacity to process multiple signals is reduced. Thus, when assigning a capacity to simultaneous motion processing, this must be qualified by designating the degree of information extraction. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

Graphene-Selenium Hybrid Microballs as Cathode Materials for High-performance Lithium-Selenium Secondary Battery Applications.

PubMed

Youn, Hee-Chang; Jeong, Jun Hui; Roh, Kwang Chul; Kim, Kwang-Bum

2016-08-02

In this study, graphene-selenium hybrid microballs (G-SeHMs) are prepared in one step by aerosol microdroplet drying using a commercial spray dryer, which represents a simple, scalable continuous process, and the potential of the G-SeHMs thus prepared is investigated for use as cathode material in applications of lithium-selenium secondary batteries. These morphologically unique graphene microballs filled with Se particles exhibited good electrochemical properties, such as high initial specific capacity (642 mA h g(-1) at 0.1 C, corresponding to Se electrochemical utilisation as high as 95.1%), good cycling stability (544 mA h g(-1) after 100 cycles at 0.1 C; 84.5% retention) and high rate capability (specific capacity of 301 mA h g(-1) at 5 C). These electrochemical properties are attributed to the fact that the G-SeHM structure acts as a confinement matrix for suppressing the dissolution of polyselenides in the organic electrolyte, as well as an electron conduction path for increasing the transport rate of electrons for electrochemical reactions. Notably, based on the weight of hybrid materials, electrochemical performance is considerably better than that of previously reported Se-based cathode materials, attributed to the high Se loading content (80 wt%) in hybrid materials.

Mesoporous carbon spheres with controlled porosity for high-performance lithium-sulfur batteries

NASA Astrophysics Data System (ADS)

Wang, Dexian; Fu, Aiping; Li, Hongliang; Wang, Yiqian; Guo, Peizhi; Liu, Jingquan; Zhao, Xiu Song

2015-07-01

Mesoporous carbon (MC) spheres with hierarchical pores, controlled pore volume and high specific surface areas have been prepared by a mass-producible spray drying assisted template method using sodium alginate as carbon precursor and commercial colloidal silica particles as hard template. The resulting MC spheres, possessing hierarchical pores in the range of 3-30 nm, are employed as conductive matrices for the preparation of cathode materials for lithium-sulfur batteries. A high pressure induced one-step impregnation of elemental sulfur into the pore of the MC spheres has been exploited. The electrochemical performances of sulfur-impregnated MC spheres (S-MC) derived from MC spheres with different pore volume and specific surface area but with the same sulfur loading ratio of 60 wt% (S-MC-X-60) have been investigated in details. The S-MC-4-60 composite cathode material displayed a high initial discharge capacity of 1388 mAhg-1 and a good cycling stability of 857 mAhg-1 after 100 cycles at 0.2C, and shows also excellent rate capability of 864 mAhg-1 at 2C. More importantly, the sulfur loading content in MC-4 spheres can reach as high as 80%, and it still can deliver a capacity of 569 mAhg-1 after 100 cycles at 0.2C.

Hard Carbon Originated from Polyvinyl Chloride Nanofibers As High-Performance Anode Material for Na-Ion Battery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bai, Ying; Wang, Zhen; Wu, Chuan

2015-02-27

Two types of hard carbon materials were synthesized through direct pyrolysis of commercial polyvinyl chloride (PVC) particles and pyrolysis of PVC nanofibers at 600-800 degrees C, respectively, where the nanofibers were prepared by an electrospinning PVC precursors method. These as-prepared hard carbon samples were used as anode materials for Na-ion batteries. The hard carbon obtained from PVC nanofibers achieved a high reversible capacity of 271 mAh/g and an initial Coulombic efficiency of 69.9%, which were much superior to the one from commercial PVC, namely, a reversible capacity of 206 mAh/g and an initial Coulombic efficiency of 60.9%. In addition, themore » hard carbon originated from the PVC nanofibers exhibited good cycling stability and rate performance: the initial discharge capacities were 389, 228, 194, 178, 147 mAh/g at the current density of 12, 24, 60, 120, and 240 mA/g, respectively, retaining 211 mAh/g after 150 cycles. Such excellent cycle performance, high reversible capacity, and good rate capability enabled this hard carbon to be a promising candidate as anode material for Na-ion battery application.« less

Biosorption of hexavalent chromium from aqueous medium with Opuntia biomass.

PubMed

Fernández-López, José A; Angosto, José M; Avilés, María D

2014-01-01

The biosorption of hexavalent chromium from aqueous solutions by Opuntia cladodes and ectodermis from cactus fruits was investigated. Both types of biomass are considered low-cost, natural, and ecofriendly biosorbents. Batch experiments were carried out to determine Cr(VI) biosorption capacity and the efficiency of the biosorption process under different pH, initial Cr(VI) concentration, and sorbent dosage. The biosorption of Cr(VI) by Opuntia biomass was highly pH dependent, favoring higher metal uptake at low pH. The higher biosorption capacity was exhibited at pH 2. The optimal conditions were obtained at a sorbent dosage of 1 g L(-1) and initial metal concentration of 10 mg L(-1). Biosorption kinetic data were properly fitted with the pseudo-second-order kinetic model. The rate constant, the initial biosorption rate, and the equilibrium biosorption capacity were determined. The experimental equilibrium data obtained were analyzed using two-parameter isotherm models (Langmuir, Freundlich, and Temkin). The Langmuir maximum monolayer biosorption capacity (q max) was 18.5 mg g(-1) for cladodes and 16.4 mg g(-1) for ectodermis. The results suggest that Opuntia biomass could be considered a promising low-cost biosorbent for the ecofriendly removal of Cr(VI) from aqueous systems.

Hard carbon originated from polyvinyl chloride nanofibers as high-performance anode material for Na-ion battery.

PubMed

Bai, Ying; Wang, Zhen; Wu, Chuan; Xu, Rui; Wu, Feng; Liu, Yuanchang; Li, Hui; Li, Yu; Lu, Jun; Amine, Khalil

2015-03-11

Two types of hard carbon materials were synthesized through direct pyrolysis of commercial polyvinyl chloride (PVC) particles and pyrolysis of PVC nanofibers at 600-800 °C, respectively, where the nanofibers were prepared by an electrospinning PVC precursors method. These as-prepared hard carbon samples were used as anode materials for Na-ion batteries. The hard carbon obtained from PVC nanofibers achieved a high reversible capacity of 271 mAh/g and an initial Coulombic efficiency of 69.9%, which were much superior to the one from commercial PVC, namely, a reversible capacity of 206 mAh/g and an initial Coulombic efficiency of 60.9%. In addition, the hard carbon originated from the PVC nanofibers exhibited good cycling stability and rate performance: the initial discharge capacities were 389, 228, 194, 178, 147 mAh/g at the current density of 12, 24, 60, 120, and 240 mA/g, respectively, retaining 211 mAh/g after 150 cycles. Such excellent cycle performance, high reversible capacity, and good rate capability enabled this hard carbon to be a promising candidate as anode material for Na-ion battery application.

An evaluation of the phosphorus storage capacity of an anaerobic/aerobic sequential batch biofilm reactor.

PubMed

Chiou, Ren-Jie; Yang, Yi-Rong

2008-07-01

The aim of this work was to assess the phosphorus storage capability of the polyphosphate (poly-P) accumulating organisms (PAO) in the biofilm using a sequential batch biofilm reactor (SBBR). In the anaerobic phase, the specific COD uptake rates increases from 0.05 to 0.22 (mg-COD/mg-biomass/h) as the initial COD increases and the main COD uptake activity occurs in the initial 30 min. The polyhydroxyalkanoates (PHAs) accumulation from 18 to 38 (mg-PHA/g-biomass) and phosphorus release from 20 to 60 (mg-P/L) share a similar trend. The adsorbed COD cannot be immediately transformed to PHAs. Since the PHAs' demand per released phosphorus is independent of the initial COD, the enhancement of the PHA accumulation would be of benefit to phosphorus release. The only requirement is to have an initial amount of substrate that will result in sufficient PHA accumulation (approximately 20 mg-PHA/g-biomass) for phosphorus release. During the aerobic phase, the aeration should not only provide sufficient dissolved oxygen, but should also enhance the mass transfer and the diffusion. In other words, the limitation to the phosphorus storage capability always occurs during the anaerobic phase, not the aerobic phase.

Integrating collaborative place-based health promotion coalitions into existing health system structures: the experience from one Australian health coalition.

PubMed

Ehrlich, Carolyn; Kendall, Elizabeth

2015-01-01

Increasingly, place-based collaborative partnerships are being implemented to develop the capacity of communities to build supportive environments and improve population health outcomes. These place-based initiatives require cooperative and coordinated responses that can exist within social systems and integrate multiple responses. However, the dynamic interplay between co-existing systems and new ways of working makes implementation outcomes unpredictable. We interviewed eight programme leaders, three programme teams and two advisory groups to explore the capacity of one social system to implement and normalise a collaborative integrated place-based health promotion initiative in the Logan and Beaudesert area in South East Queensland, Australia. The construct of capacity as defined in the General Theory of Implementation was used to develop a coding framework. Data were then placed into conceptually coherent groupings according to this framework until all data could be accounted for. Four themes defined capacity for implementation of a collaborative and integrated response; namely, the ability to (1) traverse a nested and contradictory social landscape, (2) be a responsive and 'good' community partner, (3) establish the scaffolding required to work 'in place'; and (4) build a shared meaning and engender trust. Overall, we found that the capacity of the system to embed a place-based health promotion initiative was severely limited by the absence of these features. Conflict, disruption and constant change within the context into which the place-based collaborative partnership was being implemented meant that existing relationships were constantly undermined and the capacity of the partners to develop trust-based coherent partnerships was constantly diminished. To enhance the likelihood that collaborative and integrated place-based health promotion initiatives will become established ways of working, an agreed, meaningful and clearly articulated vision and identity are required; goals must be prioritised and negotiated; and sustainable resourcing must be assured.

Collaborative Procurement Initiative

EPA Pesticide Factsheets

GPP's Clean Energy Collaborative Procurement Initiative provides a platform for deploying clean energy technologies across multiple government and educational organizations for maximum impact on installed solar system capacity and local economic activity.

Research Programs & Initiatives

Cancer.gov

CGH develops international initiatives and collaborates with other NCI divisions, NCI-designated Cancer Centers, and other countries to support cancer control planning, encourage capacity building, and support cancer research and research networks.

Establishing Networks to Lever Investments in Developing Capacity for Agricultural Monitoring: A GEOGLAM Perspective

NASA Astrophysics Data System (ADS)

Whitcraft, A. K.; Becker-Reshef, I.

2016-12-01

Since 2011, the Group on Earth Observations Global Agricultural Monitoring (GEOGLAM) Initiative has been working to strengthen the international community's capacity to use Earth observation (EO) data to derive timely, accurate, and transparent information on agriculture. A key component of GEOGLAM is the development of individual and institutional capacity for EO-based agricultural monitoring at multiple scales, from national to regional to global, in low-, middle-, and high-income countries. Despite the fact that the need for enhancing capacity is frequently acknowledged, there is little formal or informal literature documenting best practices for developing and implementing comprehensive capacity development strategies around Earth observations knowledge sharing. As a result, many projects and activities develop knowledge-sharing strategies on an ad hoc basis, and may be missing out on levering lessons, techniques, and toolsets already developed. In the past year, GEOGLAM has aimed to spur relationships and collaborations with capacity development initiatives and networks, toward sharing and documenting strategies and tactical experiences in this domain. This presentation will provide some perspective on challenges and opportunities encountered so far, from the GEOGLAM perspective, with the goal of continued dialogue and coordination with other session participants.

Gene transfer with a vector expressing Maxi-K from a smooth muscle-specific promoter restores erectile function in the aging rat.

PubMed

Melman, A; Biggs, G; Davies, K; Zhao, W; Tar, M T; Christ, G J

2008-03-01

Previous reports have demonstrated that gene transfer with the alpha, or pore-forming, subunit of the human Maxi-K channel (hSlo) restores the decline in erectile capacity observed in established rat models of diabetes and aging. Preliminary data from a human clinical trial also showed safety and potential efficacy in 11 men treated with the same plasmid construct expressing the Maxi-K channel. In all instances, the original plasmid was driven by the heterologous cytomegalovirus promoter which is broadly active in a wide variety of cell and tissue types. To more precisely determine the contribution of the corporal myocyte to the observed physiological effects in vivo, we report here our initial work using a distinct vector (pSMAA-hSlo) in which hSlo gene expression was driven off the mouse smooth muscle alpha-actin (SMAA) promoter. Specifically, older rats, with diminished erectile capacity, were given a single intracorporal injection with either 100 mug pVAX-hSlo or 10, 100 or 1000 mug pSMAA-hSlo, or vector or vehicle alone. Significantly increased intracavernous pressure (ICP) responses to cavernous nerve stimulation were observed for all doses of both plasmids encoding hSlo, relative to control injections. These data confirm and extend previous observations to document that smooth muscle cell-specific expression of hSlo in corporal tissue is both necessary and sufficient to restore erectile function in aging rats.

Influence of Torsion Effect on the Mechanical Characteristics of Reinforced Concrete Column

NASA Astrophysics Data System (ADS)

Wang, Debin; Fan, Guoxi

2017-11-01

The purpose of this paper is to study the effect of torsional effect and loading rate on the flexural capacity of RC members. Based on the fiber model of finite element software ABAQUS, a model has been established with the consideration of the strain rate sensitivity of steel and concrete. The model is used to reflect the influence of the rotational component of ground motion by applying the initial angular displacement. The mechanical properties of RC columns under monotonic loads are simulated. The simulation results show that there has been a decrease in the carrying capacity and initial stiffness of RC columns for high initial torsion angle. With the increase of initial torsion angle, the influence of loading rate on RC columns gradually increases.

Effect of Specific Growth Rate on Fermentative Capacity of Baker’s Yeast

PubMed Central

Van Hoek, Pim; Van Dijken, Johannes P.; Pronk, Jack T.

1998-01-01

The specific growth rate is a key control parameter in the industrial production of baker’s yeast. Nevertheless, quantitative data describing its effect on fermentative capacity are not available from the literature. In this study, the effect of the specific growth rate on the physiology and fermentative capacity of an industrial Saccharomyces cerevisiae strain in aerobic, glucose-limited chemostat cultures was investigated. At specific growth rates (dilution rates, D) below 0.28 h−1, glucose metabolism was fully respiratory. Above this dilution rate, respirofermentative metabolism set in, with ethanol production rates of up to 14 mmol of ethanol · g of biomass−1 · h−1 at D = 0.40 h−1. A substantial fermentative capacity (assayed offline as ethanol production rate under anaerobic conditions) was found in cultures in which no ethanol was detectable (D < 0.28 h−1). This fermentative capacity increased with increasing dilution rates, from 10.0 mmol of ethanol · g of dry yeast biomass−1 · h−1 at D = 0.025 h−1 to 20.5 mmol of ethanol · g of dry yeast biomass−1 · h−1 at D = 0.28 h−1. At even higher dilution rates, the fermentative capacity showed only a small further increase, up to 22.0 mmol of ethanol · g of dry yeast biomass−1 · h−1 at D = 0.40 h−1. The activities of all glycolytic enzymes, pyruvate decarboxylase, and alcohol dehydrogenase were determined in cell extracts. Only the in vitro activities of pyruvate decarboxylase and phosphofructokinase showed a clear positive correlation with fermentative capacity. These enzymes are interesting targets for overexpression in attempts to improve the fermentative capacity of aerobic cultures grown at low specific growth rates. PMID:9797269

Nitrogen doped graphene - Silver nanowire hybrids: An excellent anode material for lithium ion batteries

NASA Astrophysics Data System (ADS)

Nair, Anju K.; Elizabeth, Indu; S, Gopukumar; Thomas, Sabu; M. S, Kala; Kalarikkal, Nandakumar

2018-01-01

We present an in-situ polyol assisted synthesis approach for the preparation of silver nanowires (AgNW) over the nitrogen doped graphene (NG) sheets and has been tested as a viable LIBs anode material for the first time. The use of NG serves as nucleation sites, thereby facilitating the growth of AgNWs. The specific material design of the as-prepared NG-AgNW hybrids involves some advantages, including a continuous AgNW-graphene conducting network. Since AgNWs are electrically conductive, it provides an electrical contact with NG sheets which can effectively help the charge transport process and limit the variations in volume during the lithiation/de-lithiation processes. Apart from this, the insertion of metallic Ag nanowires into a percolated NG network increases the interlayer distance of NG sheets and prevent its restacking. Moreover, the more porous nature of the hybrid structure accommodating the large volume changes of AgNWs. As an anode material for LIBs, the NG-AgNW hybrid displays a remarkable initial discharge capacity of 1215 mAh g-1 and attains a stable capacity of 724 mAh g-1 at a current density of 100 mA g-1 after 50 cycles. The electrode exhibits a stable reversible capacity of 714, 634, 550 and 464 mA h g-1 at 0.1, 0.2, 0.5, 1 Ag-1 respectively. The reversible capacity (710 mAh g-1) at 0.1 Ag-1 is recovered after the cycling at various current densities confirming outstanding rate performance of the material. In addition, the coulombic efficiency, the NG-AgNW anode retains nearly 99% after the second cycle, further indicating its excellent reversibility. The hybrid material exhibits better cycling stability, greater rate capability, capacity retention and superior reversible capacity than that of bare AgNW and NG sheets. Our smart design will pave way for the development of efficient electrode materials for high capacity and long cycle life LIBs.

Staphylococcus aureus α-Toxin Response Distinguishes Respiratory Virus–Methicillin-Resistant S. aureus Coinfection in Children

PubMed Central

Yu, Karl O. A.; Randolph, Adrienne G.; Agan, Anna A.; Yip, Wai-Ki; Truemper, Edward J.; Weiss, Scott L.; Ackerman, Kate G.; Schwarz, Adam J.; Giuliano, John S.; Hall, Mark W.; Bubeck Wardenburg, Juliane

2016-01-01

Background. Development of methicillin-resistant Staphylococcus aureus (MRSA) pneumonia after a respiratory viral infection is frequently fatal in children. In mice, S. aureus α-toxin directly injures pneumocytes and increases mortality, whereas α-toxin blockade mitigates disease. The role of α-toxin in pediatric staphylococcal-viral coinfection is unclear. Methods. We enrolled children across 34 North American pediatric intensive care units with acute respiratory failure and suspected influenza virus infection. Serial serum anti-α-toxin antibody titers and functional α-toxin neutralization capacity were compared across children coinfected with MRSA or methicillin-susceptible S. aureus (MSSA) and control children infected with influenza virus only. MRSA isolates were tested for α-toxin production and lethality in a murine pneumonia model. Results. Influenza virus was identified in 22 of 25 children with MRSA coinfection (9 died) and 22 patients with MSSA coinfection (all survived). Initial α-toxin–specific antibody titers were similar, compared with those in the 13 controls. In patients with serial samples, only MRSA-coinfected patients showed time-dependent increases in anti-α-toxin titer and functional neutralization capacity. MRSA α-toxin production from patient isolates correlated with initial serologic titers and with mortality in murine pneumonia. Conclusions. These data implicate α-toxin as a relevant antigen in severe pediatric MRSA pneumonia associated with respiratory viral infection, supporting a potential role for toxin-neutralizing therapy. PMID:27651418

Highly efficient fluoride adsorption from aqueous solution by nepheline prepared from kaolinite through alkali-hydrothermal process.

PubMed

Wang, Hao; Feng, Qiming; Liu, Kun; Li, Zishun; Tang, Xuekun; Li, Guangze

2017-07-01

A direct alkali-hydrothermal induced transformation process was adopted to prepare nepheline from raw kaolinite (shortened form RK in this paper) and NaOH solution in this paper. Structure and morphology characterizations of the synthetic product showed that the nepheline possessed high degree of crystallinity and uniform surface morphology. Specific surface area of nepheline is 18 m 2 /g, with a point of zero charge at around pH 5.0-5.5. The fluoride (F - ions) adsorption by the synthetic nepheline (shortened form SN in this paper) from aqueous solution was also investigated under different experimental conditions. The adsorption process well matched the Langmuir isotherm model with an amazing maximum adsorption capacity of 183 mg/g at 323 K. The thermodynamic parameters (ΔG 0 , ΔH 0 , and ΔS 0 ) for adsorption on SN were also determined from the temperature dependence. The adsorption capacities of fluoride on SN increased with increasing of temperature and initial concentration. Initial pH value also had influence on adsorption process. Adsorption of fluoride was rapidly increased in 5-60 min and thereafter increased slowly to reach the equilibrium in about 90-180 min under all conditions. The adsorption followed a pseudo-second order rate law. Copyright © 2017 Elsevier Ltd. All rights reserved.

Equilibrium, Kinetic, and Thermodynamic Studies on the Adsorption of Cadmium from Aqueous Solution by Modified Biomass Ash

PubMed Central

Zheng, Xuebo; Cui, Hongbiao; Zhu, Zhenqiu; Liang, Jiani

2017-01-01

Natural biomass ash of agricultural residuals was collected from a power plant and modified with hexagonal mesoporous silica and functionalized with 3-aminopropyltriethoxysilane. The physicochemical and morphological properties of the biomass ash were analyzed by ICP-OES, SEM, TEM-EDS, FTIR, and BET analysis. The adsorption behavior of the modified product for Cd2+ in aqueous solution was studied as a function of pH, initial metal concentration, equilibrium time, and temperature. Results showed that the specific surface area of the modified product was 9 times that of the natural biomass ash. The modified biomass ash exhibited high affinity for Cd2+ and its adsorption capacity increased sharply with increasing pH from 4.0 to 6.0. The maximum adsorption capacity was 23.95 mg/g in a pH 5 solution with an initial metal concentration of 50 mg/L and a contact time of 90 min. The adsorption of Cd2+ onto the modified biomass ash was well fitted to the Langmuir model and it followed pseudo-second-order kinetics. Thermodynamic analysis results showed that the adsorption of Cd2+ was spontaneous and endothermic in nature. The results suggest that the modified biomass ash is promising for use as an inexpensive and effective adsorbent for Cd2+ removal from aqueous solution. PMID:28348509

Fabrication of hierarchically porous TiO2 nanofibers by microemulsion electrospinning and their application as anode material for lithium-ion batteries.

PubMed

Zhang, Jin; Cai, Yibing; Hou, Xuebin; Song, Xiaofei; Lv, Pengfei; Zhou, Huimin; Wei, Qufu

2017-01-01

Titanium dioxide (TiO 2 ) nanofibers have been widely applied in various fields including photocatalysis, energy storage and solar cells due to the advantages of low cost, high abundance and nontoxicity. However, the low conductivity of ions and bulk electrons hinder its rapid development in lithium-ion batteries (LIB). In order to improve the electrochemical performances of TiO 2 nanomaterials as anode for LIB, hierarchically porous TiO 2 nanofibers with different tetrabutyl titanate (TBT)/paraffin oil ratios were prepared as anode for LIB via a versatile single-nozzle microemulsion electrospinning (ME-ES) method followed by calcining. The experimental results indicated that TiO 2 nanofibers with the higher TBT/paraffin oil ratio demonstrated more axially aligned channels and a larger specific surface area. Furthermore, they presented superior lithium-ion storage properties in terms of specific capacity, rate capability and cycling performance compared with solid TiO 2 nanofibers for LIB. The initial discharge and charge capacity of porous TiO 2 nanofibers with a TBT/paraffin oil ratio of 2.25 reached up to 634.72 and 390.42 mAh·g -1 , thus resulting in a coulombic efficiency of 61.51%; and the discharge capacity maintained 264.56 mAh·g -1 after 100 cycles, which was much higher than that of solid TiO 2 nanofibers. TiO 2 nanofibers with TBT/paraffin oil ratio of 2.25 still obtained a high reversible capacity of 204.53 mAh·g -1 when current density returned back to 40 mA·g -1 after 60 cycles at increasing stepwise current density from 40 mA·g -1 to 800 mA·g -1 . Herein, hierarchically porous TiO 2 nanofibers have the potential to be applied as anode for lithium-ion batteries in practical applications.

Moving the Barricades to Physical Activity: A Qualitative Analysis of Open Streets Initiatives Across the United States.

PubMed

Eyler, Amy A; Hipp, J Aaron; Lokuta, Julie

2015-01-01

Ciclovía, or Open Streets initiatives, are events where streets are opened for physical activity and closed to motorized traffic. Although the initiatives are gaining popularity in the United States, little is known about planning and implementing them. The goals of this paper are to explore the development and implementation of Open Streets initiatives and make recommendations for increasing the capacity of organizers to enhance initiative success. Phenomenology with qualitative analysis of structured interviews was used. Study setting was urban and suburban communities in the United States. Study participants were organizers of Open Streets initiatives in U.S. cities. Using a list of 47 events held in 2011, 27 lead organizers were interviewed by telephone about planning, implementation, and lessons learned. The interviews were digitally recorded and transcribed. A phenomenologic approach was used, an initial coding tool was developed after reviewing a sample of transcripts, and constant comparative coding methodology was applied. Themes and subthemes were generated from codes. The most common reasons for initiation were to highlight or improve health and transportation. Most initiatives aimed to reach the general population, but some targeted families, children, or specific neighborhoods. Getting people to understand the concept of Open Streets was an important challenge. Other challenges included lack of funding and personnel, and complex logistics. These initiatives democratize public space for citizens while promoting physical activity, social connectedness, and other broad agendas. There are opportunities for the research community to contribute to the expanse and sustainability of Open Streets, particularly in evaluation and dissemination.

Importance of polypyrrole in constructing 3D hierarchical carbon nanotube@MnO2 perfect core-shell nanostructures for high-performance flexible supercapacitors

NASA Astrophysics Data System (ADS)

Zhou, Jinyuan; Zhao, Hao; Mu, Xuemei; Chen, Jiayi; Zhang, Peng; Wang, Yaling; He, Yongmin; Zhang, Zhenxing; Pan, Xiaojun; Xie, Erqing

2015-08-01

This study reports the preparation of 3D hierarchical carbon nanotube (CNT) @MnO2 core-shell nanostructures under the assistance of polypyrrole (PPy). The as-prepared CNT@PPy@MnO2 core-shell structures show a perfect coating of MnO2 on each CNT and, more importantly, a robust bush-like pseudocapacitive shell to effectively increase the specific surface area and enhance the ion accessibility. As expected, a high specific capacity of 490-530 F g-1 has been achieved from CNT@PPy@MnO2 single electrodes. And about 98.5% of the capacity is retained after 1000 charge/discharge cycles at a current density of 5 A g-1. Furthermore, the assembled asymmetric CNT@PPy@MnO2//AC capacitors show the maximum energy density of 38.42 W h kg-1 (2.24 mW h cm-3) at a power density of 100 W kg-1 (5.83 mW cm-3), and they maintain 59.52% of the initial value at 10 000 W kg-1 (0.583 W cm-3). In addition, the assembled devices show high cycling stabilities (89.7% after 2000 cycles for asymmetric and 87.2% for symmetric), and a high bending stability (64.74% after 200 bending tests). This ability to obtain high energy densities at high power rates while maintaining high cycling stability demonstrates that this well-designed structure could be a promising electrode material for high-performance supercapacitors.This study reports the preparation of 3D hierarchical carbon nanotube (CNT) @MnO2 core-shell nanostructures under the assistance of polypyrrole (PPy). The as-prepared CNT@PPy@MnO2 core-shell structures show a perfect coating of MnO2 on each CNT and, more importantly, a robust bush-like pseudocapacitive shell to effectively increase the specific surface area and enhance the ion accessibility. As expected, a high specific capacity of 490-530 F g-1 has been achieved from CNT@PPy@MnO2 single electrodes. And about 98.5% of the capacity is retained after 1000 charge/discharge cycles at a current density of 5 A g-1. Furthermore, the assembled asymmetric CNT@PPy@MnO2//AC capacitors show the maximum energy density of 38.42 W h kg-1 (2.24 mW h cm-3) at a power density of 100 W kg-1 (5.83 mW cm-3), and they maintain 59.52% of the initial value at 10 000 W kg-1 (0.583 W cm-3). In addition, the assembled devices show high cycling stabilities (89.7% after 2000 cycles for asymmetric and 87.2% for symmetric), and a high bending stability (64.74% after 200 bending tests). This ability to obtain high energy densities at high power rates while maintaining high cycling stability demonstrates that this well-designed structure could be a promising electrode material for high-performance supercapacitors. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr03426d

A siloxane-incorporated copolymer as an in situ cross-linkable binder for high performance silicon anodes in Li-ion batteries

NASA Astrophysics Data System (ADS)

Jeena, M. T.; Bok, Taesoo; Kim, Si Hoon; Park, Sooham; Kim, Ju-Young; Park, Soojin; Ryu, Ja-Hyoung

2016-04-01

The electrochemical performance of Li-ion batteries (LIBs) can be highly tuned by various factors including the morphology of the anode material, the nature of the electrolyte, the binding material, and the percentage of conducting materials. Binding materials have been of particular interest to researchers over the decades as a means to further improve the cycle durability and columbic efficiency of LIBs. Such approaches include the introduction of different polymeric binders such as poly(acrylic acid) (PAA), carboxymethyl cellulose (CMC), and alginic acid (Alg) into the Si anode of LIBs. To achieve a better efficiency of LIBs, herein, we introduce a novel copolymer, poly(tert-butyl acrylate-co-triethoxyvinylsilane) (TBA-TEVS), as an efficient binder with stable cycle retention and excellent specific capacity. The binder forms a highly interconnected three-dimensional network upon thermal treatment as a result of de-protection of the tert-butyl group and the consequent inter-intra condensation reaction, which minimizes pulverization of the Si nanoparticles. Moreover, the siloxane group is expected to promote the formation of stable solid-electrolyte-interface (SEI) layers. A series of random copolymers were synthesized by varying the molar ratio of tert-butyl acrylate and triethoxyvinylsilane. Twenty-one percent of TEVS in the TBS-TEVS copolymer gave rise to a superior performance as a binder for Si anodes, where the anodes showed a stable specific capacity of 2551 mA h g-1 over hundreds of cycles and an initial columbic efficiency (ICE) of 81.8%.The electrochemical performance of Li-ion batteries (LIBs) can be highly tuned by various factors including the morphology of the anode material, the nature of the electrolyte, the binding material, and the percentage of conducting materials. Binding materials have been of particular interest to researchers over the decades as a means to further improve the cycle durability and columbic efficiency of LIBs. Such approaches include the introduction of different polymeric binders such as poly(acrylic acid) (PAA), carboxymethyl cellulose (CMC), and alginic acid (Alg) into the Si anode of LIBs. To achieve a better efficiency of LIBs, herein, we introduce a novel copolymer, poly(tert-butyl acrylate-co-triethoxyvinylsilane) (TBA-TEVS), as an efficient binder with stable cycle retention and excellent specific capacity. The binder forms a highly interconnected three-dimensional network upon thermal treatment as a result of de-protection of the tert-butyl group and the consequent inter-intra condensation reaction, which minimizes pulverization of the Si nanoparticles. Moreover, the siloxane group is expected to promote the formation of stable solid-electrolyte-interface (SEI) layers. A series of random copolymers were synthesized by varying the molar ratio of tert-butyl acrylate and triethoxyvinylsilane. Twenty-one percent of TEVS in the TBS-TEVS copolymer gave rise to a superior performance as a binder for Si anodes, where the anodes showed a stable specific capacity of 2551 mA h g-1 over hundreds of cycles and an initial columbic efficiency (ICE) of 81.8%. Electronic supplementary information (ESI) available. See DOI: 10.1039/c6nr01559j

Ni-MH storage test and cycle life test

NASA Technical Reports Server (NTRS)

Dell, R. Dan; Klein, Glenn C.; Schmidt, David F.

1994-01-01

Gates Aerospace Batteries is conducting two long term test programs to fully characterize the NiMH cell technology for aerospace applications. The first program analyzes the effects of long term storage upon cell performance. The second program analyzes cycle life testing and preliminary production lot testing. This paper summarizes these approaches to testing the NiMH couple and culminates with initial storage and testing recommendations. Long term storage presents challenges to deter the adverse condition of capacity fade in NiMH cells. Elevated but stabilized pressures and elevated but stabilized end-of-charge voltages also appear to be a characteristic phenomenon of long term storage modes. However, the performance degradation is dependent upon specific characteristics of the metal-hydride alloy. To date, there is no objective evidence with which to recommend the proper method for storage and handling of NiMH cells upon shipment. This is particularly critical due to limited data points that indicate open circuit storage at room temperature for 60 to 90 days will result in irrecoverable capacity loss. Accordingly a test plan was developed to determine what method of mid-term to long-term storage will prevent irrecoverable capacity loss. The explicit assumption is that trickle charging at some rate above the self-discharge rate will prevent the irreversible chemical changes to the negative electrode that result in the irrecoverable capacity loss. Another premise is that lower storage temperatures, typically 0 C for aerospace customers, will impede any negative chemical reactions. Three different trickle charge rates are expected to yield a fairly flat response with respect to recoverable capacity versus baseline cells in two different modes of open circuit. Specific attributes monitored include: end-of-charge voltage, end-of-charge pressure, mid-point discharge voltage, capacity, and end-of-discharge pressure. Cycle life testing and preliminary production lot testing continue to dominate the overall technology development effort at GAB. The cell life test program reflects continuing improvements in baseline cell designs. Performance improvements include lower and more stable charge voltages and pressures. The continuing review of production lot testing assures conformance to the design criteria and expectations. This is especially critical during this period of transferring technology from research and development status to production.

Sulfur based electrode materials for secondary batteries

NASA Astrophysics Data System (ADS)

Hao, Yong

Developing next generation secondary batteries has attracted much attention in recent years due to the increasing demand of high energy and high power density energy storage for portable electronics, electric vehicles and renewable sources of energy. This dissertation investigates sulfur based advanced electrode materials in Lithium/Sodium batteries. The electrochemical performances of the electrode materials have been enhanced due to their unique nano structures as well as the formation of novel composites. First, a nitrogen-doped graphene nanosheets/sulfur (NGNSs/S) composite was synthesized via a facile chemical reaction deposition. In this composite, NGNSs were employed as a conductive host to entrap S/polysulfides in the cathode part. The NGNSs/S composite delivered an initial discharge capacity of 856.7 mAh g-1 and a reversible capacity of 319.3 mAh g-1 at 0.1C with good recoverable rate capability. Second, NGNS/S nanocomposites, synthesized using chemical reaction-deposition method and low temperature heat treatment, were further studied as active cathode materials for room temperature Na-S batteries. Both high loading composite with 86% gamma-S8 and low loading composite with 25% gamma-S8 have been electrochemically evaluated and compared with both NGNS and S control electrodes. It was found that low loading NGNS/S composite exhibited better electrochemical performance with specific capacity of 110 and 48 mAh g-1 at 0.1C at the 1st and 300th cycle, respectively. The Coulombic efficiency of 100% was obtained at the 300th cycle. Third, high purity rock-salt (RS), zinc-blende (ZB) and wurtzite (WZ) MnS nanocrystals with different morphologies were successfully synthesized via a facile solvothermal method. RS-, ZB- and WZ-MnS electrodes showed the capacities of 232.5 mAh g-1, 287.9 mAh g-1 and 79.8 mAh g-1 at the 600th cycle, respectively. ZB-MnS displayed the best performance in terms of specific capacity and cyclability. Interestingly, MnS electrodes exhibited an unusual phenomenon of capacity increase upon cycling which was ascribed to the decreased cell resistance and enhanced interfacial charge storage. In summary, this dissertation provides investigation of sulfur based electrode materials with sulfur/N-doped graphene composites and MnS nanocrystals. Their electrochemical performances have been evaluated and discussed. The understanding of their reaction mechanisms and electrochemical enhancement could make progress on development of secondary batteries.

Battery state-of-charge estimation using approximate least squares

NASA Astrophysics Data System (ADS)

Unterrieder, C.; Zhang, C.; Lunglmayr, M.; Priewasser, R.; Marsili, S.; Huemer, M.

2015-03-01

In recent years, much effort has been spent to extend the runtime of battery-powered electronic applications. In order to improve the utilization of the available cell capacity, high precision estimation approaches for battery-specific parameters are needed. In this work, an approximate least squares estimation scheme is proposed for the estimation of the battery state-of-charge (SoC). The SoC is determined based on the prediction of the battery's electromotive force. The proposed approach allows for an improved re-initialization of the Coulomb counting (CC) based SoC estimation method. Experimental results for an implementation of the estimation scheme on a fuel gauge system on chip are illustrated. Implementation details and design guidelines are presented. The performance of the presented concept is evaluated for realistic operating conditions (temperature effects, aging, standby current, etc.). For the considered test case of a GSM/UMTS load current pattern of a mobile phone, the proposed method is able to re-initialize the CC-method with a high accuracy, while state-of-the-art methods fail to perform a re-initialization.

DNA Damage Levels Determine Cyclobutyl Pyrimidine Dimer Repair Mechanisms in Alfalfa Seedlings.

PubMed Central

Quaite, F. E.; Takayanagi, S.; Ruffini, J.; Sutherland, J. C.; Sutherland, B. M.

1994-01-01

Ultraviolet radiation in sunlight damages DNA in plants, but little is understood about the types, lesion capacity, and coordination of repair pathways. We challenged intact alfalfa seedlings with UV doses that induced different initial levels of cyclobutyl pyrimidine dimers and measured repair by excision and photoreactivation. By using alkaline gel electrophoresis of nonradioactive DNAs treated with a cyclobutyl pyrimidine dimer-specific UV endonuclease, we quantitated ethidium-stained DNA by electronic imaging and calculated lesion frequencies from the number average molecular lengths. At low initial dimer frequencies (less than ~30 dimers per million bases), the seedlings used only photoreactivation to repair dimers; excision repair was not significant. At higher damage levels, both excision and photorepair contributed significantly. This strategy would allow plants with low damage levels to use error-free repair requiring only an external light energy source, whereas seedlings subjected to higher damage frequencies could call on additional repair processes requiring cellular energy. Characterization of repair in plants thus requires an investigation of a range of conditions, including the level of initial damage. PMID:12244228

Enhanced hydrophilicity of chlorided aluminum oxide particulates

NASA Technical Reports Server (NTRS)

Cofer, W. R., III

1978-01-01

An enhancement of hydrophilicity for chlorided aluminas was demonstrated by the results obtained from gaseous H2O sorptions at 70-, 80-, and 86-percent relative humidity on alpha and gamma aluminum oxide particulates and on alpha and gamma aluminum oxide particulates with a chemisorbed surface chloride phase (produced by reactions of gaseous HCl + H2O on alumina). Continuous sorption histories for H2O on chlorided aluminas having specific surface areas that range from 7 to 227 sq m/g before chloriding indicated that initial sorption rates were directly linked to the extent of chemisorbed chlorided coverage and implied the same relationship for sorption capacities. The initial sorption rate on chlorided aluminas was found to be slower for the first exposure to H2O than for subsequent exposures (which reached equilibrated H2O coverages much faster), suggesting that slow chemical reactions between H2O and chlorided alumina may have been operative during initial exposures. Chlorided alumina particles were found to remain very hydrophilic (relative to nonchlorided analogs) for several H2O sorption/desorption cycles.

The roles of ubiquitin modifying enzymes in neoplastic disease.

PubMed

Kumari, Nishi; Jaynes, Patrick William; Saei, Azad; Iyengar, Prasanna Vasudevan; Richard, John Lalith Charles; Eichhorn, Pieter Johan Adam

2017-12-01

The initial experiments performed by Rose, Hershko, and Ciechanover describing the identification of a specific degradation signal in short-lived proteins paved the way to the discovery of the ubiquitin mediated regulation of numerous physiological functions required for cellular homeostasis. Since their discovery of ubiquitin and ubiquitin function over 30years ago it has become wholly apparent that ubiquitin and their respective ubiquitin modifying enzymes are key players in tumorigenesis. The human genome encodes approximately 600 putative E3 ligases and 80 deubiquitinating enzymes and in the majority of cases these enzymes exhibit specificity in sustaining either pro-tumorigenic or tumour repressive responses. In this review, we highlight the known oncogenic and tumour suppressive effects of ubiquitin modifying enzymes in cancer relevant pathways with specific focus on PI3K, MAPK, TGFβ, WNT, and YAP pathways. Moreover, we discuss the capacity of targeting DUBs as a novel anticancer therapeutic strategy. Copyright © 2017 Elsevier B.V. All rights reserved.

Attachment-inducing capacities of fish skin epithelial extracts on oncomiracidia of Benedenia seriolae (Monogenea: Capsalidae).

PubMed

Yoshinaga, Tomoyoshi; Nagakura, Tatsuhiro; Ogawa, Kazuo; Fukuda, Yutaka; Wakabayashi, Hisatsugu

2002-03-01

Attachment-inducing capacities of skin epithelial extracts of yellowtail, Japanese flounder and red sea bream on oncomiracidia of the monogenean Benedenia seriolae were examined. Clear differences were not detected in the capacity among the fish species, although B. seriolae infects only yellowtail and its congeners in Seriola. This suggests that either the capacity is not host specific or host-specific attachment-inducing capacity cannot be detected by the assay method. Further, the attachment-inducing capacities were suppressed by wheat-germ lectin and concanavalin A in skin epithelial extracts of Japanese flounder and yellowtail, respectively. This suggests that some sugar-related chemical substances existing in fish epithelia induce the attachment of B. seriolae oncomiracidia.

34 CFR 222.171 - What LEAs may be eligible for Discretionary Construction grants?

Code of Federal Regulations, 2013 CFR

2013-07-01

...) Meet the specific numeric requirements regarding bonding capacity. (2) The Secretary must also consider... students; or (v) Meet the specific numeric requirements regarding bonding capacity. (2) The Secretary must...

THE ELECTRIC CAPACITY OF SUSPENSIONS WITH SPECIAL REFERENCE TO BLOOD.

PubMed

Fricke, H

1925-11-20

1. The specific capacity of a suspension is that capacity which) combined in parallel with a certain resistance, electrically balances 1 cm. cube of the suspension. 2. The following formula holds for the specific capacity of a suspension of spheroids, each of which is composed of a well conducting interior surrounded by a thin membrane of a comparatively high resistance: See PDF for Equation C, specific capacity of suspension; C(o), static capacity of one sq. cm. of membrane; r, r(1) specific resistances respectively of suspension and of suspending liquid; 2 q major axis of spheroid, alpha constant tabulated in Table I. 3. The following formula holds practically for any suspension whatever the form of the suspended particle. See PDF for Equation C = C(100) being the specific capacity of a suspension with a concentration of 100 per cent. Formulae (1a) and (1b) hold only for the case, when the frequency is so low, that the impedance of the static capacity of the membrane around a single particle is high as compared with the resistance of the interior of the particle. The formulae hold also for a suspension of homogeneous particles, when polarization takes place at the surface of each particle, provided the polarization resistance is low as compared with the impedance of the polarization capacity. 4. A description is given of a method for measuring the capacity of a suspension at frequencies between 800 and 4(1/2) million cycles. By means of a specially designed bridge, a substitution method is employed, by which in the last analysis the suspension is compared with the suspending liquid which is so diluted as to have the same specific resistance as the suspension, consecutive measurements being made in the same electrolytic cell. 5. Formula (1b) is verified by measurements of the capacity of suspensions of varying volume concentrations of the red corpuscles of a dog. 6. By means of the above measurements, the value of C(o) is calculated by equation (1a). 7. It is found that C(o) is independent of the frequency up to 4(1/2) million cycles and that it is also independent of the suspending liquid. These results furnish considerable evidence of the validity of the theory, that C(o) represents the static capacity of a corpuscle membrane. 8. On this assumption and using a probable value for the dielectric constant of the membrane, the thickness of the membrane is calculated to be 3.3.10(-7)cm.

Nanoscale surface modification of Li-rich layered oxides for high-capacity cathodes in Li-ion batteries

NASA Astrophysics Data System (ADS)

Lan, Xiwei; Xin, Yue; Wang, Libin; Hu, Xianluo

2018-03-01

Li-rich layered oxides (LLOs) have been developed as a high-capacity cathode material for Li-ion batteries, but the structural complexity and unique initial charging behavior lead to several problems including large initial capacity loss, capacity and voltage fading, poor cyclability, and inferior rate capability. Since the surface conditions are critical to electrochemical performance and the drawbacks, nanoscale surface modification for improving LLO's properties is a general strategy. This review mainly summarizes the surface modification of LLOs and classifies them into three types of surface pre-treatment, surface gradient doping, and surface coating. Surface pre-treatment usually introduces removal of Li2O for lower irreversible capacity while surface doping is aimed to stabilize the structure during electrochemical cycling. Surface coating layers with different properties, protective layers to suppress the interface side reaction, coating layers related to structural transformation, and electronic/ionic conductive layers for better rate capability, can avoid the shortcomings of LLOs. In addition to surface modification for performance enhancement, other strategies can also be investigated to achieve high-performance LLO-based cathode materials.

CELLS INVOLVED IN THE IMMUNE RESPONSE

PubMed Central

Singhal, Sharwan K.; Richter, Maxwell

1968-01-01

Cell suspensions of immune rabbit lymph nodes and spleen were capable of undergoing blastogenesis and mitosis and of incorporating tritiated thymidine when maintained in culture with the specific antigen in vitro. They did not respond to other, non-cross-reacting antigens. The blastogenic response obtained with immune lymph node cells could be correlated with the antibody synthesizing capacity of fragment cultures prepared from the same lymph nodes. Cell suspensions of immune bone marrow responded to non-cross-reacting antigens only whereas cell suspensions of immune thymus, sacculus rotundus, and appendix did not respond when exposed to any of the antigens tested. On the other hand, neither fragments nor cell suspensions prepared from lymph nodes, spleen, and thymus of normal, unimmunized rabbits responded with antibody formation and blastogenesis when exposed to any of the antigens. However, normal bone marrow cells responded with marked blastogenesis and tritiated thymidine uptake. The specificity of this in vitro bone marrow response was demonstrated by the fact that the injection of a protein antigen in vivo resulted in the loss of reactivity by the marrow cell to that particular antigen but not to the other, non-cross-reacting antigens. Furthermore, bone marrow cells of tolerant rabbits failed to respond to the specific antigen in vitro. It was also demonstrated that normal bone marrow cells incubated with antigen are capable of forming antibody which could be detected by the fluorescent antibody technique. This response of the bone marrow cells has been localized to the lymphocyte-rich fraction of the bone marrow. It is concluded that the bone marrow lymphocyte, by virtue of its capacity to react with blastogenesis and mitosis and with antibody formation upon initial exposure to the antigen, a capacity not possessed by lymphocytes of the other lymphoid organs, has a preeminent role in the sequence of cellular events culminating in antibody formation. PMID:4176224

Estimating aquifer transmissivity from specific capacity using MATLAB.

PubMed

McLin, Stephen G

2005-01-01

Historically, specific capacity information has been used to calculate aquifer transmissivity when pumping test data are unavailable. This paper presents a simple computer program written in the MATLAB programming language that estimates transmissivity from specific capacity data while correcting for aquifer partial penetration and well efficiency. The program graphically plots transmissivity as a function of these factors so that the user can visually estimate their relative importance in a particular application. The program is compatible with any computer operating system running MATLAB, including Windows, Macintosh OS, Linux, and Unix. Two simple examples illustrate program usage.

Self-assembled mesoporous TiO2/carbon nanotube composite with a three-dimensional conducting nanonetwork as a high-rate anode material for lithium-ion battery

NASA Astrophysics Data System (ADS)

Wang, Jie; Ran, Ran; Tade, Moses O.; Shao, Zongping

2014-05-01

Mesoporous three-dimensional (3D) TiO2/carbon nanotube conductive hybrid nanostructures can be successfully developed using polyethylene oxide (PEO) to modify the surfaces of carbon nanotubes (CNTs). During the synthesis process, PEO acts as not only "bridges" to connect the TiO2 nanoparticles to the CNT surfaces but also as "hosts" to accommodate and stabilize the in situ generated TiO2 particles. As the electrodes for lithium-ion batteries, such mesoporous 3D TiO2/CNT hybrids, demonstrate high Li storage capacity, superior rate performance and excellent long-term cycling stability. They exhibit a reversible specific capacity of 203 mA h g-1 at 100 mA g-1 and a stable capacity retention of 91 mA h g-1 at 8000 mA g-1 (47.6 C) over 100 cycles; they also retain approximately 90% (71 mA h g-1) of their initial discharge capacity after 900 cycles at an extremely high rate of 15,000 mA g-1 (89 C). This facile synthetic strategy to construct mesoporous 3D TiO2/CNT conductive hybrids provides a convenient route that efficiently assembles various inorganic oxide components on the CNTs' surfaces and enables the formation of heterogeneous nanostructures with novel functionalities. In particular, utilizing a conductive 3D CNT network can serve as a promising strategy for developing high-performance electrodes for Li secondary batteries and supercapacitors.

Pyro-synthesis of a high rate nano-Li3V2(PO4)3/C cathode with mixed morphology for advanced Li-ion batteries.

PubMed

Kang, Jungwon; Mathew, Vinod; Gim, Jihyeon; Kim, Sungjin; Song, Jinju; Im, Won Bin; Han, Junhee; Lee, Jeong Yong; Kim, Jaekook

2014-02-10

A monoclinic Li3V2(PO4)3/C (LVP/C) cathode for lithium battery applications was synthesized by a polyol-assisted pyro-synthesis. The polyol in the present synthesis acts not only as a solvent, reducing agent and a carbon source but also as a low-cost fuel that facilitates a combustion process combined with the release of ultrahigh exothermic energy useful for nucleation process. Subsequent annealing of the amorphous particles at 800°C for 5 h is sufficient to produce highly crystalline LVP/C nanoparticles. A combined analysis of X-ray diffraction (XRD) and neutron powder diffraction (NPD) patterns was used to determine the unit cell parameters of the prepared LVP/C. Electron microscopic studies revealed rod-type particles of length ranging from nanometer to micrometers dispersed among spherical particles with average particle-sizes in the range of 20-30 nm. When tested for Li-insertion properties in the potential windows of 3-4.3 and 3-4.8 V, the LVP/C cathode demonstrated initial discharge capacities of 131 and 196 mAh/g (~100% theoretical capacities) at 0.15 and 0.1 C current densities respectively with impressive capacity retentions for 50 cycles. Interestingly, the LVP/C cathode delivered average specific capacities of 125 and 90 mAh/g at current densities of 9.6 C and 15 C respectively within the lower potential window.

[Assessment of Functioning when Conducting Occupational Capacity Evaluations--What is "Evidence-Based"?].

PubMed

Canela, Carlos; Schleifer, Roman; Dube, Anish; Hengartner, Michael P; Ebner, Gerhard; Seifritz, Erich; Liebrenz, Michael

2016-03-01

Occupational capacity evaluations have previously been subject to criticism for lacking in quality and consistency. To the authors' knowledge, there is no clear consensus on the best way to formally assess functioning within capacity evaluations. In this review we investigated different instruments that are used to assess functioning in occupational capacity evaluations. Systematic review of the literature. Though several instruments that assess functional capacity were found in our search, a specific validated instrument assessing occupational capacity as part of a larger psychiatric evaluation was not found. The limitations of the existing instruments on assessing functional capacity are discussed. Medical experts relying on instruments to conduct functional capacity evaluations should be cognizant of their limitations. The findings call for the development and use of an instrument specifically designed to assess the functional and occupational capacity of psychiatric patients, which is also likely to improve the quality of these reports. © Georg Thieme Verlag KG Stuttgart · New York.

Sulfur-infiltrated porous carbon microspheres with controllable multi-modal pore size distribution for high energy lithium-sulfur batteries.

PubMed

Zhao, Cunyu; Liu, Lianjun; Zhao, Huilei; Krall, Andy; Wen, Zhenhai; Chen, Junhong; Hurley, Patrick; Jiang, Junwei; Li, Ying

2014-01-21

Sulfur has received increasing attention as a cathode material for lithium-sulfur (Li-S) batteries due to its high theoretical specific capacity. However, the commercialization of Li-S batteries is limited by the challenges of poor electrical conductivity of sulfur, dissolution of the polysulfide intermediates into the electrolyte, and volume expansion of sulfur during cycling. Herein, we report the fabrication of novel-structured porous carbon microspheres with a controllable multi-modal pore size distribution, i.e., a combination of interconnected micropores, mesopores and macropores. Cathodes made of sulfur infiltrated in such a hierarchical carbon framework provide several advantages: (1) a continuous and high surface area carbon network for enhanced electrical conductivity and high sulfur loading; (2) macropores and large mesopores bridged by small mesopores to provide good electrolyte accessibility and fast Li ion transport and to accommodate volume expansion of sulfur; and (3) small mesopores and micropores to improve carbon/sulfur interaction and to help trap polysulfides. An initial discharge capacity at 1278 mA h g(-1) and capacity retention at 70.7% (904 mA h g(-1)) after 100 cycles at a high rate (1 C) were achieved. The material fabrication process is relatively simple and easily scalable.

Surface-modified anodic aluminum oxide membrane with hydroxyethyl celluloses as a matrix for bilirubin removal.

PubMed

Xue, Maoqiang; Ling, Yisheng; Wu, Guisen; Liu, Xin; Ge, Dongtao; Shi, Wei

2013-01-01

Microporous anodic aluminum oxide (AAO) membranes were modified by 3-glycidoxypropyltrimethoxysilane to produce terminal epoxy groups. These were used to covalently link hydroxyethyl celluloses (HEC) to amplify reactive groups of AAO membrane. The hydroxyl groups of HEC-AAO composite membrane were further modified with 1,4-butanediol diglycidyl ether to link arginine as an affinity ligand. The contents of HEC and arginine of arginine-immobilized HEC-AAO membrane were 52.1 and 19.7mg/g membrane, respectively. As biomedical adsorbents, the arginine-immobilized HEC-AAO membranes were tested for bilirubin removal. The non-specific bilirubin adsorption on the unmodified HEC-AAO composite membranes was 0.8mg/g membrane. Higher bilirubin adsorption values, up to 52.6mg/g membrane, were obtained with the arginine-immobilized HEC-AAO membranes. Elution of bilirubin showed desorption ratio was up to 85% using 0.3M NaSCN solution as the desorption agent. Comparisons equilibrium and dynamic capacities showed that dynamic capacities were lower than the equilibrium capacities. In addition, the adsorption mechanism of bilirubin and the effects of temperature, initial concentration of bilirubin, albumin concentration and ionic strength on adsorption were also investigated. Copyright © 2012 Elsevier B.V. All rights reserved.

Enhanced adsorptive removal of Safranine T from aqueous solutions by waste sea buckthorn branch powder modified with dopamine: Kinetics, equilibrium, and thermodynamics

NASA Astrophysics Data System (ADS)

Xu, Xiaohui; Bai, Bo; Wang, Honglun; Suo, Yourui

2015-12-01

Polydopamine coated sea buckthorn branch powder (PDA@SBP) was facilely synthesized via a one-pot bio-inspired dip-coating approach. The as-synthesized PDA@SBP was characterized using Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The adsorption progresses of Safranine T on the surface of PDA@SBP adsorbent were systematically investigated. More specifically, the effects of solution pH, contact time, initial concentration and temperature were evaluated, respectively. The experimental results showed the adsorption capacity of PDA@SBP at 293.15 K could reach up to 54.0 mg/g; the adsorption increased by 201.7% compared to that of native SBP (17.9 mg/g). Besides, kinetics studies showed that pseudo-second-order kinetic model adequately described the adsorption behavior. The adsorption experimental data could be fitted well a Freundlich isotherm model. Thermodynamic analyses showed that the ST adsorption was a physisorption endothermic process. Regeneration of the spent PDA@SBP adsorbent was conducted with 0.1 M HCl without significant reduction in adsorption capacity. On the basis of these investigations, it is believed that the PDA@SBP adsorbent could have potential applications in sewage disposal areas because of their considerable adsorption capacities, brilliant regeneration capability, and cost-effective and eco-friendly preparation and use.

Facile solvothermal synthesis of NaTi2(PO4)3/C porous plates as electrode materials for high-performance sodium ion batteries

NASA Astrophysics Data System (ADS)

Huang, Zhifeng; Liu, Li; Yi, Lingguang; Xiao, Wei; Li, Min; Zhou, Qian; Guo, Guoxiong; Chen, Xiaoying; Shu, Hongbo; Yang, Xiukang; Wang, Xianyou

2016-09-01

NaTi2(PO4)3/C porous plates have been successfully synthesized via solvothermal approach with ammonia as inductive agent combined in-situ carbon coating. It reveals that the inductive agent plays a critical role in morphology-controllable fabrication. The morphology, structure, and electrochemical properties of NaTi2(PO4)3/C composites with multilayered plates, single-layered plate, porous multilayered plates all have been investigated, which are prepared by using urea, triethylamine, and ammonia, respectively. Among these samples, NaTi2(PO4)3/C porous multilayered plates with ammonia addition exhibit the best electrochemical properties due to their unique mesoporous structure. NaTi2(PO4)3/C porous multilayered plates deliver an initial specific capacity of 125 and 110 mAh g-1 at 0.1 and 1 C, respectively. Furthermore, NaTi2(PO4)3/C porous multilayered plates show a good rate capability, whose capacity and corresponding capacity retention reach 85 mAh g-1 and 82.4%, respectively, after 120 cycles under the high rate of 10 C. The excellent results indicate that the NaTi2(PO4)3/C porous multilayered plates are a promising electrode candidate for sodium ion battery.

Highly Durable Na2V6O16·1.63H2O Nanowire Cathode for Aqueous Zinc-Ion Battery.

PubMed

Hu, Ping; Zhu, Ting; Wang, Xuanpeng; Wei, Xiujuan; Yan, Mengyu; Li, Jiantao; Luo, Wen; Yang, Wei; Zhang, Wencui; Zhou, Liang; Zhou, Zhiqiang; Mai, Liqiang

2018-03-14

Rechargeable aqueous zinc-ion batteries are highly desirable for grid-scale applications due to their low cost and high safety; however, the poor cycling stability hinders their widespread application. Herein, a highly durable zinc-ion battery system with a Na 2 V 6 O 16 ·1.63H 2 O nanowire cathode and an aqueous Zn(CF 3 SO 3 ) 2 electrolyte has been developed. The Na 2 V 6 O 16 ·1.63H 2 O nanowires deliver a high specific capacity of 352 mAh g -1 at 50 mA g -1 and exhibit a capacity retention of 90% over 6000 cycles at 5000 mA g -1 , which represents the best cycling performance compared with all previous reports. In contrast, the NaV 3 O 8 nanowires maintain only 17% of the initial capacity after 4000 cycles at 5000 mA g -1 . A single-nanowire-based zinc-ion battery is assembled, which reveals the intrinsic Zn 2+ storage mechanism at nanoscale. The remarkable electrochemical performance especially the long-term cycling stability makes Na 2 V 6 O 16 ·1.63H 2 O a promising cathode for a low-cost and safe aqueous zinc-ion battery.

Pollen Aquaporins: The Solute Factor.

PubMed

Pérez Di Giorgio, Juliana A; Soto, Gabriela C; Muschietti, Jorge P; Amodeo, Gabriela

2016-01-01

In the recent years, the biophysical properties and presumed physiological role of aquaporins (AQPs) have been expanded to specialized cells where water and solute exchange are crucial traits. Complex but unique processes such as stomatal movement or pollen hydration and germination have been addressed not only by identifying the specific AQP involved but also by studying how these proteins integrate and coordinate cellular activities and functions. In this review, we referred specifically to pollen-specific AQPs and analyzed what has been assumed in terms of transport properties and what has been found in terms of their physiological role. Unlike that in many other cells, the AQP machinery in mature pollen lacks plasma membrane intrinsic proteins, which are extensively studied for their high water capacity exchange. Instead, a variety of TIPs and NIPs are expressed in pollen. These findings have altered the initial understanding of AQPs and water exchange to consider specific and diverse solutes that might be critical to sustaining pollen's success. The spatial and temporal distribution of the pollen AQPs also reflects a regulatory mechanism that allowing a properly adjusting water and solute exchange.

Analysis of antigen-specific B-cell memory directly ex vivo.

PubMed

McHeyzer-Williams, Louise J; McHeyzer-Williams, Michael G

2004-01-01

Helper T-cell-regulated B-cell memory develops in response to initial antigen priming as a cellular product of the germinal center (GC) reaction. On antigen recall, memory response precursors expand rapidly with exaggerated differentiation into plasma cells to produce the high-titer, high-affinity antibody(Ab) that typifies the memory B-cell response in vivo. We have devised a high-resolution flow cytometric strategy to quantify the emergence and maintenance of antigen-specific memory B cells directly ex vivo. Extended cell surface phenotype establishes a level of cellular diversity not previously appreciated for the memory B-cell compartment. Using an "exclusion transfer" strategy, we ascertain the capacity of two distinct memory B-cell populations to transfer antigen-specific memory into naive adoptive hosts. Finally, we sequence expressed messenger ribonucleic acid (mRNA) from single cells within the population to estimate the level of somatic hypermutation as the best molecular indicator of B-cell memory. In this chapter, we describe the methods used in each of these four sections that serve to provide high-resolution quantification of antigen-specific B-cell memory responses directly ex vivo.

Highly macroscopically degenerated single-point ground states as source of specific heat capacity anomalies in magnetic frustrated systems

NASA Astrophysics Data System (ADS)

Jurčišinová, E.; Jurčišin, M.

2018-04-01

Anomalies of the specific heat capacity are investigated in the framework of the exactly solvable antiferromagnetic spin- 1 / 2 Ising model in the external magnetic field on the geometrically frustrated tetrahedron recursive lattice. It is shown that the Schottky-type anomaly in the behavior of the specific heat capacity is related to the existence of unique highly macroscopically degenerated single-point ground states which are formed on the borders between neighboring plateau-like ground states. It is also shown that the very existence of these single-point ground states with large residual entropies predicts the appearance of another anomaly in the behavior of the specific heat capacity for low temperatures, namely, the field-induced double-peak structure, which exists, and should be observed experimentally, along with the Schottky-type anomaly in various frustrated magnetic system.

A Medium-Throughput Single Cell CRISPR-Cas9 Assay to Assess Gene Essentiality.

PubMed

Grassian, A R; Scales, T M E; Knutson, S K; Kuntz, K W; McCarthy, N J; Lowe, C E; Moore, J D; Copeland, R A; Keilhack, H; Smith, J J; Wickenden, J A; Ribich, S

2015-01-01

Target selection for oncology is a crucial step in the successful development of therapeutics. Clustered regularly interspaced short palindromic repeats (CRISPR)-Cas9 editing of specific loci offers an alternative method to RNA interference and small molecule inhibitors for determining whether a cell line is dependent on a specific gene product for proliferation or survival. In our initial studies using CRISPR-Cas9 to verify the dependence on EZH2 activity for proliferation of a SMARCB1/SNF5/INI1 mutant malignant rhabdoid tumor (MRT) cell line, we noted that the initial reduction in proliferation was lost over time. We hypothesized that in the few cells that retain proliferative capacity, at least one allele of EZH2 remains functional. To verify this, we developed an assay to analyze 10s-100s of clonal cell populations for target gene disruption using restriction digest and fluorescent fragment length analyses. Our results clearly show that in cell lines in which EZH2 is essential for proliferation, at least one potentially functional allele of EZH2 is retained in the clones that survive. This assay clearly indicates whether or not a specific gene is essential for survival and/or proliferation in a given cell line. Such data can aid the development of more robust therapeutics by increasing confidence in target selection.

Demonstration of the need for cardiovascular and pulmonary normative data for cancer survivors.

PubMed

Schneider, C M; Repka, C P; Brown, J M; Lalonde, T L; Dallow, K T; Barlow, C E; Hayward, R

2014-12-01

Despite evidence that cancer and its treatments severely reduce cardiorespiratory fitness (CRF), normative data for cancer survivors do not exist. The present study identifies age and gender-specific CRF distributions in a cancer population. The use of cancer-specific normative CRF data may help stratify initial fitness status and assess improvements in response to exercise interventions in cancer survivors. Data from 703 cancer survivors were analyzed for this study. Quintiles were compiled for peak oxygen consumption (VO2peak), forced vital capacity (FVC), and forced expiratory volume (FEV1) for males and females in 5 age groups (19-39, 40-49, 50-59, 60-69, and ≥70 years of age). VO2peak values for the cancer population were significantly lower than the general US population. The cancer population average in each age group fell within the "very poor" classification of VO2peak values for the general population. FVC values in the cancer population were similar to the general population. Cancer survivors had very low age group-specific VO2peak values compared to the apparently healthy general US population. Previously, CRF values of cancer survivors were compared to normative values for the apparently healthy general population, which yielded imprecise classifications of initial fitness and changes in fitness, resulting in patient discouragement. © Georg Thieme Verlag KG Stuttgart · New York.

Intergranular Cracking as a Major Cause of Long-Term Capacity Fading of Layered Cathodes.

PubMed

Liu, Hao; Wolf, Mark; Karki, Khim; Yu, Young-Sang; Stach, Eric A; Cabana, Jordi; Chapman, Karena W; Chupas, Peter J

2017-06-14

Capacity fading has limited commercial layered Li-ion battery electrodes to <70% of their theoretical capacity. Higher capacities can be achieved initially by charging to higher voltages, however, these gains are eroded by a faster fade in capacity. Increasing lifetimes and reversible capacity are contingent on identifying the origin of this capacity fade to inform electrode design and synthesis. We used operando X-ray diffraction to observe how the lithiation-delithiation reactions within a LiNi 0.8 Co 0.15 Al 0.05 O 2 (NCA) electrode change after capacity fade following months of slow charge-discharge. The changes in the reactions that underpin energy storage after long-term cycling directly correlate to the capacity loss; heterogeneous reaction kinetics observed during extended cycles quantitatively account for the capacity loss. This reaction heterogeneity is ultimately attributed to intergranular fracturing that degrades the connectivity of subsurface grains within the polycrystalline NCA aggregate.

Severe progressive scoliosis in an adult female possibly secondary thoracic surgery in childhood treated with scoliosis specific Schroth physiotherapy: Case presentation.

PubMed

Lebel, Andrea; Lebel, Victoria Ashley

2016-01-01

Scoliosis is a complex three-dimensional (3D) spinal deformity. Acquired scoliosis in early childhood may progress into adulthood and pose an increased risk of health problems and reduction in quality of life. In Canada, patients with scoliosis are not referred for physiotherapeutic scoliosis-specific exercises (PSSE) despite the fact that Schroth physiotherapy, a scoliosis-specific 3D posture training and exercise program, can be effective in reducing pain and improving scoliosis curves, vital capacity, and overall quality of life in scoliosis patients. This case presentation shows that indeed adult curve progression can be stopped and even reversed with scoliosis specific Schroth physiotherapy (SSSPT) in an adult patient with scoliosis. This is a retrospective case presentation involving a 23-year-old female scoliosis patient who began an outpatient Schroth physiotherapy exercise program and was initially monitored monthly and then annually for improvement in measurements of angle of trunk rotation (ATR) and chest expansion and improvement in vital capacity measured with incentive spirometry. Photos were taken to document body image periodically throughout Schroth physiotherapy treatment. Additionally, the patient completed SRS-22 quality of life questionnaires every 2 years to evaluate daily function, pain, self-imagine, mental health, and scoliosis management satisfaction. Within one month of beginning SSSPT, the patient reported no more back pain and within 2 months, reported improved breathing. The patient also benefitted from improved chest expansion, reduced scoliosis curve angles (measured in Cobb degrees), increased vital capacity, decreased ATR, and higher SRS-22 scores. She became more active and resumed all athletic activity within 8 months of beginning Schroth physiotherapy. Adult scoliosis patients are not routinely referred for PSSE in Canada, even though Schroth physiotherapy, a form of PSSE, is shown to be effective in this case presentation. The patient in this case presentation was successfully treated with Schroth physiotherapy. Long-term comprehensive Schroth physiotherapy, to help correct and maintain proper posture in all aspects of daily living, should be part of scoliosis management for adult scoliosis patients in Canada to stop and reverse curve progression and to improve overall quality of life.

Spacing and length of passing sidings and the incremental capacity of single track.

DOT National Transportation Integrated Search

2016-02-18

The objective of this study is to evaluate the effect of initial siding spacing and distribution of siding length on the incremental capacity of infrastructure investments on single-track railway lines. Previous research has shown a linear reduction ...

Evaluating investment in quality improvement capacity building: a systematic review.

PubMed

Mery, Gustavo; Dobrow, Mark J; Baker, G Ross; Im, Jennifer; Brown, Adalsteinn

2017-02-20

Leading health systems have invested in substantial quality improvement (QI) capacity building, but little is known about the aggregate effect of these investments at the health system level. We conducted a systematic review to identify key steps and elements that should be considered for system-level evaluations of investment in QI capacity building. We searched for evaluations of QI capacity building and evaluations of QI training programmes. We included the most relevant indexed databases in the field and a strategic search of the grey literature. The latter included direct electronic scanning of 85 relevant government and institutional websites internationally. Data were extracted regarding evaluation design and common assessment themes and components. 48 articles met the inclusion criteria. 46 articles described initiative-level non-economic evaluations of QI capacity building/training, while 2 studies included economic evaluations of QI capacity building/training, also at the initiative level. No system-level QI capacity building/training evaluations were found. We identified 17 evaluation components that fit within 5 overarching dimensions (characteristics of QI training; characteristics of QI activity; individual capacity; organisational capacity and impact) that should be considered in evaluations of QI capacity building. 8 key steps in return-on-investment (ROI) assessments in QI capacity building were identified: (1) planning-stakeholder perspective; (2) planning-temporal perspective; (3) identifying costs; (4) identifying benefits; (5) identifying intangible benefits that will not be included in the ROI estimation; (6) discerning attribution; (7) ROI calculations; (8) sensitivity analysis. The literature on QI capacity building evaluation is limited in the number and scope of studies. Our findings, summarised in a Framework to Guide Evaluations of QI Capacity Building , can be used to start closing this knowledge gap. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

A collaborative approach to supporting communication in the assessment of decision-making capacity.

PubMed

Zuscak, Simon John; Peisah, Carmelle; Ferguson, Alison

2016-01-01

This paper explores the clinical implications of acquired communication disorders in decisional capacity. Discipline-specific contributions are discussed in a multidisciplinary context, with a specific focus on the role of speech and language pathologists (SLPs). Key rehabilitation issues in determining decisional capacity are identified. The impact of communication impairment on capacity is discussed in light of the research literature relating to supportive communication and collaborative practice that respects human rights. Guidelines are presented for professionals involved in the assessment of the decisional capacity of individuals with communication disorders of neurological origin. They guide an assessor through: assessing cognition, language and speech; determining preferred communication domains; and practical strategies and considerations for maximising communication. There is a dearth of guidelines available that deal with augmenting and supporting communication of individuals with acquired communication disorders of neurological origin when it comes to assessing legal decision-making capacity. Capacity assessment is a multidisciplinary realm, and the involvement of SLPs is key to maximising the decision-making capacity of these individuals. All clinicians have an obligation to maximise client autonomy and participation in decision-making. Assessments of capacity should involve a general cognitive ability assessment, followed by a decision-specific assessment tool or question set for the decision facing the patient. The involvement of speech and language pathologists (SLPs) is key to assess and facilitate capacity determinations in instances of cognitive-communication disorder. Impairments in different aspects of auditory comprehension require different accommodations.

A new strategy to mitigate the initial capacity loss of lithium ion batteries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Su, Xin; Lin, Chikai; Wang, Xiaoping

2016-08-01

Hard carbon (non-graphitizable) and related materials, like tin, tin oxide, silicon, and silicon oxide, have a high theoretical lithium delivery capacity (>550 mAh/g depending on their structural and chemical properties) but unfortunately they also exhibit a large initial capacity loss (ICL) that overrides the true reversible capacity in a full cell. Overcoming the large ICL of hard carbon in a full-cell lithium-ion battery (LIB) necessitates a new strategy wherein a sacrificial lithium source additive, such as, Li5FeO4 (LFO), is inserted on the cathode side. Full batteries using hard carbon coupled with LFO-LiCoO2 (LCO) are currently under development at our laboratory.more » We find that the reversible capacity of a cathode containing LFO can be increased by 14%. Furthermore, the cycle performance of full cells with LFO additive is improved from <90% to >95%. We show that the LFO additive not only can address the irreversible capacity loss of the anode, but can also provide the additional lithium ion source required to mitigate the lithium loss caused by side reactions. In addition, we have explored the possibility to achieve higher capacity with hard carbon, whereby the energy density of full cells can be increased from ca. 300 Wh/kg to >400 Wh/kg.« less

Nitric oxide generated by nitrate reductase increases nitrogen uptake capacity by inducing lateral root formation and inorganic nitrogen uptake under partial nitrate nutrition in rice

PubMed Central

Sun, Huwei; Li, Jiao; Song, Wenjing; Tao, Jinyuan; Huang, Shuangjie; Chen, Si; Hou, Mengmeng; Xu, Guohua; Zhang, Yali

2015-01-01

Increasing evidence shows that partial nitrate nutrition (PNN) can be attributed to improved plant growth and nitrogen-use efficiency (NUE) in rice. Nitric oxide (NO) is a signalling molecule involved in many physiological processes during plant development and nitrogen (N) assimilation. It remains unclear whether molecular NO improves NUE through PNN. Two rice cultivars (cvs Nanguang and Elio), with high and low NUE, respectively, were used in the analysis of NO production, nitrate reductase (NR) activity, lateral root (LR) density, and 15N uptake under PNN, with or without NO production donor and inhibitors. PNN increased NO accumulation in cv. Nanguang possibly through the NIA2-dependent NR pathway. PNN-mediated NO increases contributed to LR initiation, 15NH4 +/15NO3 – influx into the root, and levels of ammonium and nitrate transporters in cv. Nanguang but not cv. Elio. Further results revealed marked and specific induction of LR initiation and 15NH4 +/15NO3 – influx into the roots of plants supplied with NH4 ++sodium nitroprusside (SNP) relative to those supplied with NH4 + alone, and considerable inhibition upon the application of cPTIO or tungstate (NR inhibitor) in addition to PNN, which is in agreement with the change in NO fluorescence in the two rice cultivars. The findings suggest that NO generated by the NR pathway plays a pivotal role in improving the N acquisition capacity by increasing LR initiation and the inorganic N uptake rate, which may represent a strategy for rice plants to adapt to a fluctuating nitrate supply and increase NUE. PMID:25784715

Alliance members' roles in collective field-building: an assessment of leadership and championship within the Population Health Intervention Research Initiative for Canada.

PubMed

Di Ruggiero, Erica; Kishchuk, Natalie; Viehbeck, Sarah; Edwards, Nancy; Robinson, Kerry; Riley, Barbara; Fowler, Heather Smith

2017-12-06

The Population Health Intervention Research Initiative for Canada (PHIRIC) is a multi-stakeholder alliance founded in 2006 to advance population health intervention research (PHIR). PHIRIC aimed to strengthen Canada's capacity to conduct and use such research to inform policy and practice to improve the public's health by building PHIR as a field of research. In 2014, an evaluative study of PHIRIC at organisational and system levels was conducted, guided by a field-building and collaborative action perspective. The study involved 17 qualitative key informant interviews with 21 current and former PHIRIC Planning Committee and Working Group members. The interviews examined how individuals and organisations were acting as champions and exerting leadership in building the field of PHIR. Founding PHIRIC organisational members have been championing PHIR at organisational and system levels. While the PHIR field has progressed in terms of enhanced funding, legitimacy, profile and capacity, some members and organisations faced constraints and challenges acting as leaders and champions in their respective environments. Expectations about the future of PHIRIC and field-building of PHIR were mixed, where longer-term and founding members of PHIRIC expressed more optimism than recent members. All agreed on the need for incorporating perspectives of decision-makers into PHIR directions and initiatives. The findings contribute to understanding alliance members' roles in leadership and championship for field-building more generally, and for population health and PHIR specifically. Building this field requires multi-level efforts, collaborative action and distributed leadership to create the necessary conditions for PHIRIC members to both benefit from and contribute to advancing PHIR as a field. Lessons from this 'made in Canada' model may be of interest to other countries regarding the structures needed for PHIR field-building.

Biosorption of Hexavalent Chromium from Aqueous Medium with Opuntia Biomass

PubMed Central

2014-01-01

The biosorption of hexavalent chromium from aqueous solutions by Opuntia cladodes and ectodermis from cactus fruits was investigated. Both types of biomass are considered low-cost, natural, and ecofriendly biosorbents. Batch experiments were carried out to determine Cr(VI) biosorption capacity and the efficiency of the biosorption process under different pH, initial Cr(VI) concentration, and sorbent dosage. The biosorption of Cr(VI) by Opuntia biomass was highly pH dependent, favoring higher metal uptake at low pH. The higher biosorption capacity was exhibited at pH 2. The optimal conditions were obtained at a sorbent dosage of 1 g L−1 and initial metal concentration of 10 mg L−1. Biosorption kinetic data were properly fitted with the pseudo-second-order kinetic model. The rate constant, the initial biosorption rate, and the equilibrium biosorption capacity were determined. The experimental equilibrium data obtained were analyzed using two-parameter isotherm models (Langmuir, Freundlich, and Temkin). The Langmuir maximum monolayer biosorption capacity (q max) was 18.5 mg g−1 for cladodes and 16.4 mg g−1 for ectodermis. The results suggest that Opuntia biomass could be considered a promising low-cost biosorbent for the ecofriendly removal of Cr(VI) from aqueous systems. PMID:24982975

Understanding the investigators: a qualitative study investigating the barriers and enablers to the implementation of local investigator-initiated clinical trials in Ethiopia

PubMed Central

Franzen, Samuel R P; Chandler, Clare; Enquselassie, Fikre; Siribaddana, Sisira; Atashili, Julius; Angus, Brian; Lang, Trudie

2013-01-01

Objectives Clinical trials provide ‘gold standard’ evidence for policy, but insufficient locally relevant trials are conducted in low-income and middle-income countries. Local investigator-initiated trials could generate highly relevant data for national governments, but information is lacking on how to facilitate them. We aimed to identify barriers and enablers to investigator-initiated trials in Ethiopia to inform and direct capacity strengthening initiatives. Design Exploratory, qualitative study comprising of in-depth interviews (n=7) and focus group discussions (n=3). Setting Fieldwork took place in Ethiopia during March 2011. Participants Local health researchers with previous experiences of clinical trials or stakeholders with an interest in trials were recruited through snowball sampling (n=20). Outcome measures Detailed discussion notes were analysed using thematic coding analysis and key themes were identified. Results All participants perceived investigator-initiated trials as important for generating local evidence. System and organisational barriers included: limited funding allocation, weak regulatory and administrative systems, few learning opportunities, limited human and material capacity and poor incentives for conducting research. Operational hurdles were symptomatic of these barriers. Lack of awareness, confidence and motivation to undertake trials were important individual barriers. Training, knowledge sharing and experience exchange were key enablers to trial conduct and collaboration was unanimously regarded as important for improving capacity. Conclusions Barriers to trial conduct were found at individual, operational, organisational and system levels. These findings indicate that to increase locally led trial conduct in Ethiopia, system wide changes are needed to create a more receptive and enabling research environment. Crucially, the creation of research networks between potential trial groups could provide much needed practical collaborative support through sharing of financial and project management burdens, knowledge and resources. These findings could have important implications for capacity-strengthening initiatives but further research is needed before the results can be generalised more widely. PMID:24285629

The state of human dimensions capacity for natural resource management: needs, knowledge, and resources

USGS Publications Warehouse

Sexton, Natalie R.; Leong, Kirsten M.; Milley, Brad J.; Clarke, Melinda M.; Teel, Tara L.; Chase, Mark A.; Dietsch, Alia M.

2013-01-01

The social sciences have become increasingly important in understanding natural resource management contexts and audiences, and are essential in design and delivery of effective and durable management strategies. Yet many agencies and organizations do not have the necessary resource management. We draw on the textbook definition of HD: how and why people value natural resources, what benefits people seek and derive from those resources, and how people affect and are affected by those resources and their management (Decker, Brown, and Seimer 2001). Clearly articulating how HD information can be used and integrated into natural resource management planning and decision-making is an important challenge faced by the HD field. To address this challenge, we formed a collaborative team to explore the issue of HD capacity-building for natural resource organizations and to advance the HD field. We define HD capacity as activities, efforts, and resources that enhance the ability of HD researchers and practitioners and natural managers and decision-makers to understand and address the social aspects of conservation.Specifically, we sought to examine current barriers to integration of HD into natural resource management, knowledge needed to improve HD capacity, and existing HD tools, resources, and training opportunities. We conducted a needs assessment of HD experts and practitioners, developed a framework for considering HD activities that can contribute both directly and indirectly throughout any phase of an adaptive management cycle, and held a workshop to review preliminary findings and gather additional input through breakout group discussions. This paper provides highlights from our collaborative initiative to help frame and inform future HD capacity-building efforts and natural resource organizations and also provides a list of existing human dimensions tools and resources.

Li 3Mo 4P 5O 24: A two-electron cathode for lithium-ion batteries with three-dimensional diffusion pathways

DOE PAGES

Wen, Bohua; Khalifah, Peter G.; Liu, Jue; ...

2016-04-12

The structure of the novel compound Li 3Mo 4P 5O 24 has been solved from single crystal X-ray diffraction data. The Mo cations in Li 3Mo 4P 5O 24 are present in four distinct types of MoO 6 octahedra, each of which has one open vertex at the corner participating in a Mo=O double bond and whose other five corners are shared with PO 4 tetrahedra. On the basis of a bond valence sum difference map (BVS-DM) analysis, this framework is predicted to support the facile diffusion of Li + ions, a hypothesis that is confirmed by electrochemical testing data,more » which show that Li 3Mo 4P 5O 24 can be utilized as a rechargeable battery cathode material. It is found that Li can both be removed from and inserted into Li 3Mo 4P 5O 24. The involvement of multiple redox processes occurring at the same Mo site is reflected in electrochemical plateaus around 3.8 V associated with the Mo 6+/Mo 5+ redox couple and 2.2 V associated with the Mo 5+/Mo 4+ redox couple. The two-electron redox properties of Mo cations in this structure lead to a theoretical capacity of 198 mAh/g. When cycled between 2.0 and 4.3 V versus Li +/Li, an initial capacity of 113 mAh/g is observed with 80% of this capacity retained over the first 20 cycles. Lastly, this compound therefore represents a rare example of a solid state cathode able to support two-electron redox capacity and provides important general insights about pathways for designing next-generation cathodes with enhanced specific capacities.« less

Exploring experiences in peer mentoring as a strategy for capacity building in sexual reproductive health and HIV service integration in Kenya

PubMed Central

2014-01-01

Background The Integra Initiative designed, tested, and adapted protocols for peer mentorship in order to improve service providers’ skills, knowledge, and capacity to provide quality integrated HIV and sexual and reproductive health (SRH) services. This paper describes providers’ experiences in mentoring as a method of capacity building. Service providers who were skilled in the provision of FP or PNC services were selected to undergo a mentorship training program and to subsequently build the capacity of their peers in SRH-HIV integration. Methods A qualitative assessment was conducted to assess provider experiences and perceptions about peer mentoring. In-depth interviews were conducted with twelve mentors and twenty-three mentees who were trained in SRH and HIV integration. Interviews were recorded, transcribed, and imported to NVivo 9 for analysis. Thematic analysis methods were used to develop a coding framework from the research questions and other emerging themes. Results Mentorship was perceived as a feasible and acceptable method of training among mentors and mentees. Both mentors and mentees agreed that the success of peer mentoring largely depended on cordial relationship and consensus to work together to achieve a specific set of skills. Mentees reported improved knowledge, skills, self-confidence, and team work in delivering integrated SRH and HIV services as benefits associated with mentoring. They also associated mentoring with an increase in the range of services available and the number of clients seeking those services. Successful mentorship was conditional upon facility management support, sufficient supplies and commodities, a positive work environment, and mentors selection. Conclusion Mentoring was perceived by both mentors and mentees as a sustainable method for capacity building, which increased providers’ ability to offer a wide range of and improved access to integrated SRH and HIV services. PMID:24581143

Uncovering the role of Nb modification in improving the structure stability and electrochemical performance of LiNi0.6Co0.2Mn0.2O2 cathode charged at higher voltage of 4.5 V

NASA Astrophysics Data System (ADS)

Liu, Siyang; Chen, Xiang; Zhao, Jiayue; Su, Junming; Zhang, Congcong; Huang, Tao; Wu, Jianhua; Yu, Aishui

2018-01-01

Ni-rich cathode materials attract ongoing interest due to their high specific capacity (∼200 mAh g-1). However, these materials suffer rapid capacity fading when charged to a high voltage and cycled at elevated temperature. In this study, we propose a facile method to reconstruct the surface structure of LiNi0.6Co0.2Mn0.2O2 via Nb modification, which integrates the merits of partial Nb5+ doping in the pristine structure and surface Li3NbO4 coating. The obtained results from Rietveld refinement and high resolution transmission electron microscopy confirm that Nb5+ is partially doped into Li+ sites within the surface lattice. Further ex-situ powder X-ray diffraction and kinetic analysis using electrochemical impedance spectroscopy reveal that Nb modification stabilizes the layered structure and facilitates the charge transfer process. Owing to the robust surface structure, 1 mol% Nb modified LiNi0.6Co0.2Mn0.2O2 delivers a discharge capacity of 160.9 mAh g-1 with 91% capacity retention after 100 cycles at 3.0-4.5 V, whereas the discharge capacity of the pristine sample drops to 139.6 mAh g-1, corresponding to 78% of its initial value. The presence of Nb5+ in the Li layer exhibits positive effects on stability of layered structure, and the surface Li3NbO4 coating layer increases interfacial stability, which results in superior electrochemical performance.

Exploring experiences in peer mentoring as a strategy for capacity building in sexual reproductive health and HIV service integration in Kenya.

PubMed

Ndwiga, Charity; Abuya, Timothy; Mutemwa, Richard; Kimani, James Kelly; Colombini, Manuela; Mayhew, Susannah; Baird, Averie; Muia, Ruth Wayua; Kivunaga, Jackline; Warren, Charlotte E

2014-03-01

The Integra Initiative designed, tested, and adapted protocols for peer mentorship in order to improve service providers' skills, knowledge, and capacity to provide quality integrated HIV and sexual and reproductive health (SRH) services. This paper describes providers' experiences in mentoring as a method of capacity building. Service providers who were skilled in the provision of FP or PNC services were selected to undergo a mentorship training program and to subsequently build the capacity of their peers in SRH-HIV integration. A qualitative assessment was conducted to assess provider experiences and perceptions about peer mentoring. In-depth interviews were conducted with twelve mentors and twenty-three mentees who were trained in SRH and HIV integration. Interviews were recorded, transcribed, and imported to NVivo 9 for analysis. Thematic analysis methods were used to develop a coding framework from the research questions and other emerging themes. Mentorship was perceived as a feasible and acceptable method of training among mentors and mentees. Both mentors and mentees agreed that the success of peer mentoring largely depended on cordial relationship and consensus to work together to achieve a specific set of skills. Mentees reported improved knowledge, skills, self-confidence, and team work in delivering integrated SRH and HIV services as benefits associated with mentoring. They also associated mentoring with an increase in the range of services available and the number of clients seeking those services. Successful mentorship was conditional upon facility management support, sufficient supplies and commodities, a positive work environment, and mentors selection. Mentoring was perceived by both mentors and mentees as a sustainable method for capacity building, which increased providers' ability to offer a wide range of and improved access to integrated SRH and HIV services.

Iron Oxide Nanosheets and Pulse-Electrodeposited Ni-Co-S Nanoflake Arrays for High-Performance Charge Storage.

PubMed

Khani, Hadi; Wipf, David O

2017-03-01

Nanostructured nickel cobalt sulfide (Ni 4.5 Co 4.5 S 8 ) has been prepared through a single-step pulse-electrodeposition method. Iron oxide nanosheets at hollow graphite shells (Fe 3 O 4 @g-shells) were prepared from graphite-coated iron carbide/α-Fe (g-Fe 3 C/Fe) in a two-step annealing/electrochemical cycling process. Electrochemical characterization of the Ni 4.5 Co 4.5 S 8 and g-Fe 3 C/Fe materials showed that both have high specific capacities (206 mAh g -1 and 147 mAh g -1 at 1 A g -1 ) and excellent rate capabilities (∼95% and ∼83% retention at 20 A g -1 , respectively). To demonstrate the advantageous pairing of these high rate materials, a full-cell battery with supercapacitor-like power behavior was assembled with Ni 4.5 Co 4.5 S 8 and g-Fe 3 C/Fe as the positive and negative electrodes, respectively. The (Ni 4.5 Co 4.5 S 8 //g-Fe 3 C/Fe) device could be reversibly operated in a 0.0-1.6 V potential window, delivering an impressive specific energy of 89 Wh kg -1 at 1.1 kW kg -1 and a remarkable rate performance of 61 Wh kg -1 at a very high specific power of 38.5 kW kg -1 . Additionally, long-term cycling demonstrated that the asymmetric full cell assembly retained 91% of its initial specific capacity after 2500 cycles at 40 A g -1 . The performance features of this device are among the best for iron oxide/hydroxide and bimetallic sulfide based energy storage devices to date, thereby giving insight into design principles for the next generation high-energy-density devices.

Site specific risk assessment of an energy-from-waste/thermal treatment facility in Durham Region, Ontario, Canada. Part B: Ecological risk assessment.

PubMed

Ollson, Christopher A; Whitfield Aslund, Melissa L; Knopper, Loren D; Dan, Tereza

2014-01-01

The regions of Durham and York in Ontario, Canada have partnered to construct an energy-from-waste (EFW) thermal treatment facility as part of a long term strategy for the management of their municipal solid waste. In this paper we present the results of a comprehensive ecological risk assessment (ERA) for this planned facility, based on baseline sampling and site specific modeling to predict facility-related emissions, which was subsequently accepted by regulatory authorities. Emissions were estimated for both the approved initial operating design capacity of the facility (140,000 tonnes per year) and the maximum design capacity (400,000 tonnes per year). In general, calculated ecological hazard quotients (EHQs) and screening ratios (SRs) for receptors did not exceed the benchmark value (1.0). The only exceedances noted were generally due to existing baseline media concentrations, which did not differ from those expected for similar unimpacted sites in Ontario. This suggests that these exceedances reflect conservative assumptions applied in the risk assessment rather than actual potential risk. However, under predicted upset conditions at 400,000 tonnes per year (i.e., facility start-up, shutdown, and loss of air pollution control), a potential unacceptable risk was estimated for freshwater receptors with respect to benzo(g,h,i)perylene (SR=1.1), which could not be attributed to baseline conditions. Although this slight exceedance reflects a conservative worst-case scenario (upset conditions coinciding with worst-case meteorological conditions), further investigation of potential ecological risk should be performed if this facility is expanded to the maximum operating capacity in the future. © 2013.

Dietary antioxidant capacity and all-cause and cause-specific mortality in the E3N/EPIC cohort study.

PubMed

Bastide, Nadia; Dartois, Laureen; Dyevre, Valérie; Dossus, Laure; Fagherazzi, Guy; Serafini, Mauro; Boutron-Ruault, Marie-Christine

2017-04-01

The cellular oxidative stress (balance between pro-oxidant and antioxidant) may be a major risk factor for chronic diseases. Antioxidant capacity of human diet can be globally assessed through the dietary non-enzymatic antioxidant capacity (NEAC). Our aim was to investigate the relationship between the NEAC and all-cause and cause-specific mortality, and to test potential interactions with smoking status, a well-known pro-oxidant factor. Among the French women of the E3N prospective cohort study initiated in 1990, including 4619 deaths among 1,199,011 persons-years of follow-up. A validated dietary history questionnaire assessed usual food intake; NEAC intake was estimated using a food composition table from two different methods: ferric ion reducing antioxidant power (FRAP) and total radical-trapping antioxidant parameter (TRAP). Hazard ratio (HR) estimates and 95 % confidence intervals (CI) were derived from Cox proportional hazards regression models. In multivariate analyses, FRAP dietary equivalent intake was inversely associated with mortality from all-causes (HR for the fourth vs. the first quartile: HR 4  = 0.75, 95 % CI 0.67, 0.83, p trend  < 0.0001), cancer, and cardiovascular diseases. Similar results were obtained with TRAP. There was an interaction between NEAC dietary equivalent intake and smoking status for all-cause and cardiovascular disease mortality, but not cancer mortality (respectively, for FRAP, p inter  = 0.002; 0.013; 0.113, results were similar with TRAP), and the association was the strongest among current smokers. This prospective cohort study highlights the importance of antioxidant consumption for mortality prevention, especially among current smokers.

Three-dimensional nitrogen and sulfur co-doped holey-reduced graphene oxide frameworks anchored with MoO2 nanodots for advanced rechargeable lithium-ion batteries.

PubMed

Pei, Jie; Geng, Hongbo; Ang, Huixiang; Zhang, Lingling; Wei, Huaixin; Cao, Xueqin; Zheng, Junwei; Gu, Hongwei

2018-07-20

In this manuscript, we synthesize a porous three-dimensional anode material consisting of molybdenum dioxide nanodots anchored on nitrogen (N)/sulfur (S) co-doped reduced graphene oxide (GO) (3D MoO 2 /NP-NSG) through hydrothermal, lyophilization and thermal treatment. First, the NP-NSG is formed via hydrothermal treatment using graphene oxide, hydrogen peroxide (H 2 O 2 ), and thiourea as the co-dopant for N and S, followed by calcination of the N/S co-doped GO in the presence of ammonium molybdate tetrahydrate to obtain the 3D MoO 2 /NP-NSG product. This novel material exhibits a series of out-bound electrochemical performances, such as superior conductivity, high specific capacity, and excellent stability. As an anode for lithium-ion batteries (LIBs), the MoO 2 /NP-NSG electrode has a high initial specific capacity (1376 mAh g -1 ), good cycling performance (1250 mAh g -1 after 100 cycles at a current density of 0.2 A g -1 ), and outstanding Coulombic efficiency (99% after 450 cycles at a current density of 1 A g -1 ). Remarkably, the MoO 2 /NP-NSG battery exhibits exceedingly good rate capacities of 1021, 965, 891, 760, 649, 500 and 425 mAh g -1 at different current densities of 200, 500, 1000, 2000, 3000, 4000 and 5000 mA g -1 , respectively. The superb electrochemical performance is owed to the high porosity of the 3D architecture, the synergistic effect contribution from N and S co-doped in the reduced graphene oxide (rGO), and the uniform distribution of MoO 2 nanodots on the rGO surface.

Three-dimensional nitrogen and sulfur co-doped holey-reduced graphene oxide frameworks anchored with MoO2 nanodots for advanced rechargeable lithium-ion batteries

NASA Astrophysics Data System (ADS)

Pei, Jie; Geng, Hongbo; Ang, Huixiang; Zhang, Lingling; Wei, Huaixin; Cao, Xueqin; Zheng, Junwei; Gu, Hongwei

2018-07-01

In this manuscript, we synthesize a porous three-dimensional anode material consisting of molybdenum dioxide nanodots anchored on nitrogen (N)/sulfur (S) co-doped reduced graphene oxide (GO) (3D MoO2/NP-NSG) through hydrothermal, lyophilization and thermal treatment. First, the NP-NSG is formed via hydrothermal treatment using graphene oxide, hydrogen peroxide (H2O2), and thiourea as the co-dopant for N and S, followed by calcination of the N/S co-doped GO in the presence of ammonium molybdate tetrahydrate to obtain the 3D MoO2/NP-NSG product. This novel material exhibits a series of out-bound electrochemical performances, such as superior conductivity, high specific capacity, and excellent stability. As an anode for lithium-ion batteries (LIBs), the MoO2/NP-NSG electrode has a high initial specific capacity (1376 mAh g‑1), good cycling performance (1250 mAh g‑1 after 100 cycles at a current density of 0.2 A g‑1), and outstanding Coulombic efficiency (99% after 450 cycles at a current density of 1 A g‑1). Remarkably, the MoO2/NP-NSG battery exhibits exceedingly good rate capacities of 1021, 965, 891, 760, 649, 500 and 425 mAh g‑1 at different current densities of 200, 500, 1000, 2000, 3000, 4000 and 5000 mA g‑1, respectively. The superb electrochemical performance is owed to the high porosity of the 3D architecture, the synergistic effect contribution from N and S co-doped in the reduced graphene oxide (rGO), and the uniform distribution of MoO2 nanodots on the rGO surface.

The Plus 50 Initiative: Standards of Excellence

ERIC Educational Resources Information Center

American Association of Community Colleges (NJ1), 2010

2010-01-01

The American Association of Community Colleges' (AACC) Plus 50 Initiative (2008-2011), funded by The Atlantic Philanthropies, was created to build the capacity of community colleges nationwide to develop programming that engages the plus 50 learner. The Initiative supported a pilot group of 13 two-year institutions to develop or expand college…

Implementing Patient Safety Initiatives in Rural Hospitals

ERIC Educational Resources Information Center

Klingner, Jill; Moscovice, Ira; Tupper, Judith; Coburn, Andrew; Wakefield, Mary

2009-01-01

Implementation of patient safety initiatives can be costly in time and energy. Because of small volumes and limited resources, rural hospitals often are not included in nationally driven patient safety initiatives. This article describes the Tennessee Rural Hospital Patient Safety Demonstration project, whose goal was to strengthen capacity for…

The African Institutions Initiative: Insights from the First Four Years

ERIC Educational Resources Information Center

Cochrane, Gavin; Robin, Enora; Marjanovic, Sonja; Diepeveen, Stephanie; Hanlin, Rebecca; Kryl, David; Muchova, Lucia; Yaqub, Ohid; Chataway, Joanna

2014-01-01

In 2009, the Wellcome Trust launched a research capacity strengthening programme known as the "African Institutions Initiative" (AII). The AII is innovative in its methods and organization. The Initiative funded networked consortia (7 consortia involving 54 institutions in 18 African countries, and Northern partners). RAND Europe was…

Forecast Mekong 2012: Building scientific capacity

USGS Publications Warehouse

Stefanov, James E.

2012-01-01

In 2009, U.S. Secretary of State Hillary R. Clinton joined the Foreign Ministers of Cambodia, Laos, Thailand, and Vietnam in launching the Lower Mekong Initiative to enhance U.S. engagement with the countries of the Lower Mekong River Basin in the areas of environment, health, education, and infrastructure. The U.S. Geological Survey Forecast Mekong supports the Lower Mekong Initiative through a variety of activities. The principal objectives of Forecast Mekong include the following: * Build scientific capacity in the Lower Mekong Basin and promote cooperation and collaboration among scientists working in the region. * Provide data, information, and scientific models to help resource managers there make informed decisions. * Produce forecasting and visualization tools to support basin planning, including climate change adaptation. The focus of this product is Forecast Mekong accomplishments and current activities related to the development of scientific capacity at organizations and institutions in the region. Building on accomplishments in 2010 and 2011, Forecast Mekong continues to enhance scientific capacity in the Lower Mekong Basin with a suite of activities in 2012.

Reflections on experiential learning in evaluation capacity building with a community organization, Dancing With Parkinson's.

PubMed

Nakaima, April; Sridharan, Sanjeev

2017-05-08

This paper discusses what was learned about evaluation capacity building with community organizations who deliver services to individuals with neurological disorders. Evaluation specialists engaged by the Ontario Brain Institute Evaluation Support Program were paired with community organizations, such as Dancing With Parkinson's. Some of the learning included: relationship building is key for this model of capacity building; community organizations often have had negative experiences with evaluation and the idea that evaluations can be friendly tools in implementing meaningful programs is one key mechanism by which such an initiative can work; community organizations often need evaluation most to be able to demonstrate their value; a strength of this initiative was that the focus was not just on creating products but mostly on developing a learning process in which capacities would remain; evaluation tools and skills that organizations found useful were developing a theory of change and the concept of heterogeneous mechanisms (informed by a realist evaluation lens). Copyright © 2017. Published by Elsevier Ltd.

Performance and Ageing Robustness of Graphite/NMC Pouch Prototypes Manufactured through Eco-Friendly Materials and Processes.

PubMed

Loeffler, Nicholas; Kim, Guk-T; Passerini, Stefano; Gutierrez, Cesar; Cendoya, Iosu; De Meatza, Iratxe; Alessandrini, Fabrizio; Appetecchi, Giovanni B

2017-09-22

Graphite/lithium nickel-manganese-cobalt oxide (NMC), stacked pouch cells with nominal capacity of 15-18 Ah were designed, developed, and manufactured for automotive applications in the frame of the European Project GREENLION. A natural, water-soluble material was used as the main electrode binder, thus allowing the employment of H 2 O as the only processing solvent. The electrode formulations were developed, optimized, and upscaled for cell manufacturing. Prolonged cycling and ageing tests revealed excellent capacity retention and robustness toward degradation phenomena. For instance, above 99 % of the initial capacity is retained upon 500 full charge/discharge cycles, corresponding to a fading of 0.004 % per cycle, and about 80 % of the initial capacity is delivered after 8 months ageing at 45 °C. The stacked soft-packaged cells have shown very reproducible characteristics and performance, reflecting the goodness of design and manufacturing. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Use of sinkhole and specific capacity distributions to assess vertical gradients in a karst aquifer

USGS Publications Warehouse

McCoy, K.J.; Kozar, M.D.

2008-01-01

The carbonate-rock aquifer in the Great Valley, West Virginia, USA, was evaluated using a database of 687 sinkholes and 350 specific capacity tests to assess structural, lithologic, and topographic influences on the groundwater flow system. The enhanced permeability of the aquifer is characterized in part by the many sinkholes, springs, and solutionally enlarged fractures throughout the valley. Yet, vertical components of subsurface flow in this highly heterogeneous aquifer are currently not well understood. To address this problem, this study examines the apparent relation between geologic features of the aquifer and two spatial indices of enhanced permeability attributed to aquifer karstification: (1) the distribution of sinkholes and (2) the occurrence of wells with relatively high specific capacity. Statistical results indicate that sinkholes (funnel and collapse) occur primarily along cleavage and bedding planes parallel to subparallel to strike where lateral or downward vertical gradients are highest. Conversely, high specific capacity values are common along prominent joints perpendicular or oblique to strike. The similarity of the latter distribution to that of springs suggests these fractures are areas of upward-convergent flow. These differences between sinkhole and high specific capacity distributions suggest vertical flow components are primarily controlled by the orientation of geologic structure and associated subsurface fracturing. ?? 2007 Springer-Verlag.

Thermal Desorption Analysis of Effective Specific Soil Surface Area

NASA Astrophysics Data System (ADS)

Smagin, A. V.; Bashina, A. S.; Klyueva, V. V.; Kubareva, A. V.

2017-12-01

A new method of assessing the effective specific surface area based on the successive thermal desorption of water vapor at different temperature stages of sample drying is analyzed in comparison with the conventional static adsorption method using a representative set of soil samples of different genesis and degree of dispersion. The theory of the method uses the fundamental relationship between the thermodynamic water potential (Ψ) and the absolute temperature of drying ( T): Ψ = Q - aT, where Q is the specific heat of vaporization, and a is the physically based parameter related to the initial temperature and relative humidity of the air in the external thermodynamic reservoir (laboratory). From gravimetric data on the mass fraction of water ( W) and the Ψ value, Polyanyi potential curves ( W(Ψ)) for the studied samples are plotted. Water sorption isotherms are then calculated, from which the capacity of monolayer and the target effective specific surface area are determined using the BET theory. Comparative analysis shows that the new method well agrees with the conventional estimation of the degree of dispersion by the BET and Kutilek methods in a wide range of specific surface area values between 10 and 250 m2/g.

ParticipACTION: Baseline assessment of the 'new ParticipACTION': A quantitative survey of Canadian organizational awareness and capacity

PubMed Central

2009-01-01

Background ParticipACTION is a Canadian physical activity (PA) communications and social marketing organization that was relaunched in 2007 after a six-year hiatus. This study assesses the baseline awareness and capacity of Canadian organizations that promote physical activity, to adopt, implement and promote ParticipACTION's physical activity campaign. The three objectives were: (1) to determine organizational awareness of both the 'original' and 'new' ParticipACTION; (2) to report baseline levels of three organizational capacity domains (i.e., to adopt, implement and externally promote physical activity initiatives); and, (3) to explore potential differences in those domains based on organizational size, sector and primary mandate. Methods Organizations at local, provincial/territorial, and national levels were sent an invitation via email prior to the official launch of ParticipACTION to complete an on-line survey. The survey assessed their organization's capacity to adopt, implement and externally promote a new physical activity campaign within their organizational mandates. Descriptive statistics were employed to address the first two study objectives. A series of one-way analysis of variance were conducted to examine the third objective. Results The response rate was 29.7% (268/902). The majority of responding organizations had over 40 employees and had operated for over 10 years. Education was the most common primary mandate, followed by sport and recreation. Organizations were evenly distributed between government and not-for-profits. Approximately 96% of respondents had heard of the 'original' ParticipACTION while 54.6% had heard of the 'new' ParticipACTION (Objective 1). Findings indicate good organizational capacity in Canada to promote physical activity (Objective 2) based on reported means of approximately 4.0 (on 5-point scales) for capacity to adopt, implement, and externally promote new physical activity campaigns. Capacity to adopt new physical activity campaigns differed by organizational sector and mandate, and capacity to implement differed by organizational mandate (Objective 3). Conclusion At baseline, and without specific details of the campaign, respondents believe they have good capacity to work with ParticipACTION. ParticipACTION may do well to capitalize on the existing strong organizational capacity components of leadership, infrastructure and 'will' of national organizations to facilitate the success of its future campaigns. PMID:19995457

Intergranular Cracking as a Major Cause of Long-Term Capacity Fading of Layered Cathodes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Hao; Wolf, Mark; Karki, Khim

Capacity fading has limited commercial layered Li-ion battery electrodes to <70% of their theoretical capacity. Higher capacities can be achieved initially by charging to higher voltages, however, these gains are quickly eroded by a faster fade in capacity. In-creasing lifetimes and reversible capacity is contingent on identifying the origin of this capacity fade to inform electrode design and synthesis. We must understand how the battery reactions change following capacity loss after long-term cycling. Using operando X-ray diffraction, we followed the reaction of a LiNi 0.8Co 0.15Al 0.05O 2 (NCA) electrode after months of charge-discharge cycles. Furthermore, the heterogeneous reaction kineticsmore » observed during extended cycles quantitatively explain the capacity loss, which is ultimately attributed to inter-granular fracturing that degrades the connectivity of sub-surface grains within the polycrystalline NCA aggregate.« less

Intergranular Cracking as a Major Cause of Long-Term Capacity Fading of Layered Cathodes

DOE PAGES

Liu, Hao; Wolf, Mark; Karki, Khim; ...

2017-05-26

Capacity fading has limited commercial layered Li-ion battery electrodes to <70% of their theoretical capacity. Higher capacities can be achieved initially by charging to higher voltages, however, these gains are quickly eroded by a faster fade in capacity. In-creasing lifetimes and reversible capacity is contingent on identifying the origin of this capacity fade to inform electrode design and synthesis. We must understand how the battery reactions change following capacity loss after long-term cycling. Using operando X-ray diffraction, we followed the reaction of a LiNi 0.8Co 0.15Al 0.05O 2 (NCA) electrode after months of charge-discharge cycles. Furthermore, the heterogeneous reaction kineticsmore » observed during extended cycles quantitatively explain the capacity loss, which is ultimately attributed to inter-granular fracturing that degrades the connectivity of sub-surface grains within the polycrystalline NCA aggregate.« less

Establishing a community of practice of researchers, practitioners, policy-makers and communities to sustainably manage environmental health risks in Ecuador.

PubMed

Spiegel, Jerry M; Breilh, Jaime; Beltran, Efrain; Parra, Jorge; Solis, Fernanda; Yassi, Annalee; Rojas, Alejandro; Orrego, Elena; Henry, Bonnie; Bowie, William R; Pearce, Laurie; Gaibor, Juan; Velasquez, Patricio; Concepcion, Miriam; Parkes, Margot

2011-11-08

The Sustainably Managing Environmental Health Risk in Ecuador project was launched in 2004 as a partnership linking a large Canadian university with leading Cuban and Mexican institutes to strengthen the capacities of four Ecuadorian universities for leading community-based learning and research in areas as diverse as pesticide poisoning, dengue control, water and sanitation, and disaster preparedness. In implementing curriculum and complementary innovations through application of an ecosystem approach to health, our interdisciplinary international team focused on the question: "Can strengthening of institutional capacities to support a community of practice of researchers, practitioners, policy-makers and communities produce positive health outcomes and improved capacities to sustainably translate knowledge?" To assess progress in achieving desired outcomes, we review results associated with the logic framework analysis used to guide the project, focusing on how a community of practice network has strengthened implementation, including follow-up tracking of program trainees and presentation of two specific case studies. By 2009, train-the-trainer project initiation involved 27 participatory action research Master's theses in 15 communities where 1200 community learners participated in the implementation of associated interventions. This led to establishment of innovative Ecuadorian-led master's and doctoral programs, and a Population Health Observatory on Collective Health, Environment and Society for the Andean region based at the Universidad Andina Simon Bolivar. Building on this network, numerous initiatives were begun, such as an internationally funded research project to strengthen dengue control in the coastal community of Machala, and establishment of a local community eco-health centre focusing on determinants of health near Cuenca. Strengthening capabilities for producing and applying knowledge through direct engagement with affected populations and decision-makers provides a fertile basis for consolidating capacities to act on a larger scale. This can facilitate the capturing of benefits from the "top down" (in consolidating institutional commitments) and the "bottom up" (to achieve local results). Alliances of academic and non-academic partners from the South and North provide a promising orientation for learning together about ways of addressing negative trends of development. Assessing the impacts and sustainability of such processes, however, requires longer term monitoring of results and related challenges.

Enhancing organizational capacity to provide cancer control programs among Latino churches: design and baseline findings of the CRUZA Study.

PubMed

Allen, Jennifer D; Torres, Maria Idali; Tom, Laura S; Rustan, Sarah; Leyva, Bryan; Negron, Rosalyn; Linnan, Laura A; Jandorf, Lina; Ospino, Hosffman

2015-04-09

Faith-based organizations (FBOs) have been successful in delivering health promotion programs for African Americans, though few studies have been conducted among Latinos. Even fewer have focused on organizational change, which is required to sustain community-based initiatives. We hypothesized that FBOs serving Latinos would be more likely to offer evidence-based strategies (EBS) for cancer control after receiving a capacity enhancement intervention to implement health programs, and designed the CRUZA trial to test this hypothesis. This paper describes the CRUZA design and baseline findings. We identified Catholic parishes in Massachusetts that provided Spanish-language mass (n = 65). A baseline survey assessed organizational characteristics relevant to adoption of health programs, including readiness for adoption, "fit" between innovation and organizational mission, implementation climate, and organizational culture. In the next study phase, parishes that completed the baseline assessment will be recruited to a randomized cluster trial, with the parish as the unit of analysis. Both groups will receive a Program Manual and Toolkit. Capacity Enhancement parishes will also be offered technical support, assistance forming health committees and building inter-institutional partnerships, and skills-based training. Of the 49 parishes surveyed at baseline (75%), one-third (33%) reported having provided at least one health program in the prior year. However, only two program offerings were cancer-specific. Nearly one-fifth (18%) had an active health ministry. There was a high level of organizational readiness to adopt cancer control programs, high congruence between parish missions and CRUZA objectives, moderately conducive implementation climates, and organizational cultures supportive of CRUZA programming. Having an existing health ministry was significantly associated with having offered health programs within the past year. Relationships between health program offerings and other organizational characteristics were not statistically significant. Findings suggest that many parishes do not offer cancer control programs, yet many may be ready to do so. However, the perceptions about existing organizational practices and policies may not be conducive to program initiation. A capacity enhancement intervention may hold promise as a means of increasing health programming. The efficacy of such an intervention will be tested in phase two of this study.

Water defluoridation by aluminium oxide-manganese oxide composite material.

PubMed

Alemu, Sheta; Mulugeta, Eyobel; Zewge, Feleke; Chandravanshi, Bhagwan Singh

2014-08-01

In this study, aluminium oxide-manganese oxide (AOMO) composite material was synthesized, characterized, and tested for fluoride removal in batch experiments. AOMO was prepared from manganese(II) chloride and aluminium hydroxide. The surface area of AOMO was found to be 30.7m2/g and its specific density was determined as 2.78 g/cm3. Detailed investigation of the adsorbent by inductively coupled plasma-optical emission spectrometry, inductively coupled plasma-mass spectrometry, and ion chromatography (for sulphate only) showed that it is composed of Al, Mn, SO4, and Na as major components and Fe, Si, Ca, and Mg as minor components. Thermogravimetric analysis was used to study the thermal behaviour of AOMO. X-ray diffraction analysis showed that the adsorbent is poorly crystalline. The point of zero charge was determined as 9.54. Batch experiments (by varying the proportion of MnO, adsorbent dose, contact time, initial F concentration, and raw water pH) showed that fluoride removal efficiency ofAOMO varied significantly with percentage of MnO with an optimum value of about I11% of manganese oxide in the adsorbent. The optimum dose of the adsorbent was 4 g/L which corresponds to the equilibrium adsorption capacity of 4.8 mg F-/g. Both the removal efficiency and adsorption capacity showed an increasing trend with an increase in initial fluoride concentration of the water. The pH for optimum fluoride removal was found to be in the range between 5 and 7. The adsorption data were analysed using the Freundlich, Langmuir, and Dubinirn-Radushkevich models. The minimum adsorption capacity obtained from the non-linear Freundlich isotherm model was 4.94 mg F-/g and the maximum capacity from the Langmuir isotherm method was 19.2mg F-/g. The experimental data of fluoride adsorption on AOMO fitted well to the Freundlich isotherm model. Kinetic studies showed that the adsorption is well described by a non-linear pseudo-second-order reaction model with an average rate constant of 3.1 x 10(-2) g/min mg. It is concluded that AOMO is a highly promising adsorbent for the removal of excess fluoride from drinking water.

What evidence exists for initiatives to reduce risk and incidence of sexual violence in armed conflict and other humanitarian crises? A systematic review.

PubMed

Spangaro, Jo; Adogu, Chinelo; Ranmuthugala, Geetha; Powell Davies, Gawaine; Steinacker, Léa; Zwi, Anthony

2013-01-01

Sexual violence is highly prevalent in armed conflict and other humanitarian crises and attracting increasing policy and practice attention. This systematic review aimed to canvas the extent and impact of initiatives to reduce incidence, risk and harm from sexual violence in conflict, post-conflict and other humanitarian crises, in low and middle income countries. Twenty three bibliographic databases and 26 websites were searched, covering publications from 1990 to September 2011 using database-specific keywords for sexual violence and conflict or humanitarian crisis. The 40 included studies reported on seven strategy types: i) survivor care; ii) livelihood initiatives; iii) community mobilisation; iv) personnel initiatives; v) systems and security responses; vi) legal interventions and vii) multiple component interventions. Conducted in 26 countries, the majority of interventions were offered in African countries. Despite the extensive literature on sexual violence by combatants, most interventions addressed opportunistic forms of sexual violence committed in post-conflict settings. Only one study specifically addressed the disaster setting. Actual implementation of initiatives appeared to be limited as was the quality of outcome studies. No studies prospectively measured incidence of sexual violence, although three studies provided some evidence of reductions in association with firewood distribution to reduce women's exposure, as did one program to prevent sexual exploitation and abuse by peacekeeping forces. Apparent increases to risk resulted from lack of protection, stigma and retaliation associated with interventions. Multiple-component interventions and sensitive community engagement appeared to contribute to positive outcomes. Significant obstacles prevent women seeking help following sexual violence, pointing to the need to protect anonymity and preventive strategies. This review contributes a conceptual framework for understanding the forms, settings, and interventions for conflict and crisis-related sexual violence. It points to the need for thorough implementation of initiatives that build on local capacity, while avoiding increased risk and re-traumatisation to survivors of sexual violence.

What Evidence Exists for Initiatives to Reduce Risk and Incidence of Sexual Violence in Armed Conflict and Other Humanitarian Crises? A Systematic Review

PubMed Central

Spangaro, Jo; Adogu, Chinelo; Ranmuthugala, Geetha; Powell Davies, Gawaine; Steinacker, Léa; Zwi, Anthony

2013-01-01

Sexual violence is highly prevalent in armed conflict and other humanitarian crises and attracting increasing policy and practice attention. This systematic review aimed to canvas the extent and impact of initiatives to reduce incidence, risk and harm from sexual violence in conflict, post-conflict and other humanitarian crises, in low and middle income countries. Twenty three bibliographic databases and 26 websites were searched, covering publications from 1990 to September 2011 using database-specific keywords for sexual violence and conflict or humanitarian crisis. The 40 included studies reported on seven strategy types: i) survivor care; ii) livelihood initiatives; iii) community mobilisation; iv) personnel initiatives; v) systems and security responses; vi) legal interventions and vii) multiple component interventions. Conducted in 26 countries, the majority of interventions were offered in African countries. Despite the extensive literature on sexual violence by combatants, most interventions addressed opportunistic forms of sexual violence committed in post-conflict settings. Only one study specifically addressed the disaster setting. Actual implementation of initiatives appeared to be limited as was the quality of outcome studies. No studies prospectively measured incidence of sexual violence, although three studies provided some evidence of reductions in association with firewood distribution to reduce women's exposure, as did one program to prevent sexual exploitation and abuse by peacekeeping forces. Apparent increases to risk resulted from lack of protection, stigma and retaliation associated with interventions. Multiple-component interventions and sensitive community engagement appeared to contribute to positive outcomes. Significant obstacles prevent women seeking help following sexual violence, pointing to the need to protect anonymity and preventive strategies. This review contributes a conceptual framework for understanding the forms, settings, and interventions for conflict and crisis-related sexual violence. It points to the need for thorough implementation of initiatives that build on local capacity, while avoiding increased risk and re-traumatisation to survivors of sexual violence. PMID:23690945

49 CFR 179.200-14 - Expansion capacity.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SPECIFICATIONS FOR TANK CARS Specifications for Non-Pressure Tank Car Tanks (Classes DOT-111AW and 115AW) § 179.200-14 Expansion capacity. (a...

Expanding Integrated Pest Management Capacity: Rwanda Case Study

ERIC Educational Resources Information Center

Baributsa, Dieudonne; Flores, Luis; Rukazambuga, Daniel; Wise, John C.

2014-01-01

Purpose: Rwanda is developing its agricultural capacity to meet the needs of national food security while addressing food demands and requirements of regional and international markets. The Rwanda Horticultural Export Standards Initiative was developed by the Ministry of Agriculture and Natural Resources in collaboration with Michigan State…

School Leadership and Capacity Building in Kazakhstan

ERIC Educational Resources Information Center

Yakavets, Natallia; Frost, David; Khoroshash, Aidar

2017-01-01

The article examines the scope for initiative and independent action that lies with school principals in Kazakhstan, with a particular focus on capacity-building approaches. The study is situated within a large collaborative project between three institutions: the University of Cambridge Faculty of Education, Nazarbayev University Graduate School…

Cultivating Institutional Capacities for Learning Analytics

ERIC Educational Resources Information Center

Lonn, Steven; McKay, Timothy A.; Teasley, Stephanie D.

2017-01-01

This chapter details the process the University of Michigan developed to build institutional capacity for learning analytics. A symposium series, faculty task force, fellows program, research grants, and other initiatives are discussed, with lessons learned for future efforts and how other institutions might adapt such efforts to spur cultural…

Community Capacity Building: Starting with People Not Projects.

ERIC Educational Resources Information Center

Simpson, Lyn; Wood, Leanne; Daws, Leonie

2003-01-01

A remote Australian town's initiative to develop an Internet cafe was based on a foundation of community empowerment and capacity building. The project's failure illustrates factors that inhibit community control: overstretched local resources, failure to understand impact on existing social infrastructure and social networks, and lack of…

LOW-LEVEL CARBON MONOXIDE EXPOSURE AND WORK CAPACITY AT 1600 METERS

EPA Science Inventory

At sea level, low-level carbon monoxide (CO) exposure impairs exercise performance. To determine if altitude residence at 1600 m augments this CO effect, two studies of graded treadmill work capacity were done. The Initial Study investigated nine, non-smoking male subjects breath...

The New Jersey Nursing Initiative: building sustainable collaboration.

PubMed

Bakewell-Sachs, Susan; Mertz, Lynn M; Egreczky, Dana; Ladden, Maryjoan

2011-01-01

The New Jersey Nursing Initiative was publically launched in 2009 as a 5-year, $22 million program of the Robert Wood Johnson Foundation based at the New Jersey Chamber of Commerce Foundation. It was reauthorized in 2011 through 2016 for an additional $8.5 million. The initiative includes a faculty preparation program and strategic tracks of work focusing on building education capacity, increasing current faculty capacity, making nurse faculty a preferred career, leading policy initiatives, creating sustainable funding in support of nursing education, and ultimately, building local, regional, and statewide collaborative networks. The tagline, "So a Nurse will be there for You," emphasizes both the reality of an aging nursing workforce needing replacement and the expected health care transformation that will result in the need for new knowledge and skills in the future nursing workforce. The purpose of this article was to describe the New Jersey Nursing Initiative, emphasizing the partnerships that have resulted from the project to date. Copyright © 2011 Elsevier Inc. All rights reserved.

New High Capacity Cathode Materials for Rechargeable Li-ion Batteries: Vanadate-Borate Glasses

NASA Astrophysics Data System (ADS)

Afyon, Semih; Krumeich, Frank; Mensing, Christian; Borgschulte, Andreas; Nesper, Reinhard

2014-11-01

V2O5 based materials are attractive cathode alternatives due to the many oxidation state switches of vanadium bringing about a high theoretical specific capacity. However, significant capacity losses are eminent for crystalline V2O5 phases related to the irreversible phase transformations and/or vanadium dissolution starting from the first discharge cycle. These problems can be circumvented if amorphous or glassy vanadium oxide phases are employed. Here, we demonstrate vanadate-borate glasses as high capacity cathode materials for rechargeable Li-ion batteries for the first time. The composite electrodes of V2O5 - LiBO2 glass with reduced graphite oxide (RGO) deliver specific energies around 1000 Wh/kg and retain high specific capacities in the range of ~ 300 mAh/g for the first 100 cycles. V2O5 - LiBO2 glasses are considered as promising cathode materials for rechargeable Li-ion batteries fabricated through rather simple and cost-efficient methods.

New high capacity cathode materials for rechargeable Li-ion batteries: vanadate-borate glasses.

PubMed

Afyon, Semih; Krumeich, Frank; Mensing, Christian; Borgschulte, Andreas; Nesper, Reinhard

2014-11-19

V2O5 based materials are attractive cathode alternatives due to the many oxidation state switches of vanadium bringing about a high theoretical specific capacity. However, significant capacity losses are eminent for crystalline V2O5 phases related to the irreversible phase transformations and/or vanadium dissolution starting from the first discharge cycle. These problems can be circumvented if amorphous or glassy vanadium oxide phases are employed. Here, we demonstrate vanadate-borate glasses as high capacity cathode materials for rechargeable Li-ion batteries for the first time. The composite electrodes of V2O5 - LiBO(2) glass with reduced graphite oxide (RGO) deliver specific energies around 1000 Wh/kg and retain high specific capacities in the range of ~ 300 mAh/g for the first 100 cycles. V2O5 - LiBO(2) glasses are considered as promising cathode materials for rechargeable Li-ion batteries fabricated through rather simple and cost-efficient methods.

New High Capacity Cathode Materials for Rechargeable Li-ion Batteries: Vanadate-Borate Glasses

PubMed Central

Afyon, Semih; Krumeich, Frank; Mensing, Christian; Borgschulte, Andreas; Nesper, Reinhard

2014-01-01

V2O5 based materials are attractive cathode alternatives due to the many oxidation state switches of vanadium bringing about a high theoretical specific capacity. However, significant capacity losses are eminent for crystalline V2O5 phases related to the irreversible phase transformations and/or vanadium dissolution starting from the first discharge cycle. These problems can be circumvented if amorphous or glassy vanadium oxide phases are employed. Here, we demonstrate vanadate-borate glasses as high capacity cathode materials for rechargeable Li-ion batteries for the first time. The composite electrodes of V2O5 – LiBO2 glass with reduced graphite oxide (RGO) deliver specific energies around 1000 Wh/kg and retain high specific capacities in the range of ~ 300 mAh/g for the first 100 cycles. V2O5 – LiBO2 glasses are considered as promising cathode materials for rechargeable Li-ion batteries fabricated through rather simple and cost-efficient methods. PMID:25408200

Experimental study on performance of outdoor ground materials in aspect of surface temperature by constant field experiment in subtropical climate city

NASA Astrophysics Data System (ADS)

Xi, T. Y.; Ding, J. H.; Lv, X. W.; Lei, Y. S.

2018-06-01

In order to create a comfortable building thermal environment, it is important to study the outdoor ground materials performance. In this article, we carried out a constant field experiment in Guangzhou, China, studying on the variations of the surface temperature of three common outdoor building materials: concrete, pavement and grass. We put the equipment on six experiment points respectively to measure the ground surface temperature constantly. The result shows that because of the specific heat capacity, both concrete and pavement have an obvious time delay during their temperature decrease when the grass ground has almost no time delay. And when in the same conditions (exposed to sunlight all day), the material with a low specific heat capacity has a more sensitive variation in temperature. The lower the specific capacity is, the steeper the variation trend of the surface temperature will be. So compared with concrete, the pavement brick ground with a low specific heat capacity has a higher surface temperature in daytime and a lower temperature in the late night time. When in different conditions (different time exposed to sunlight), the temperature value is proportional to the time exposed to the sunlight between the same materials. The concrete exposed to sunlight all day has the highest temperature when the shaded one has the lowest. This experiment reveals that both specific heat capacity and the exposed time to sunlight has a strong influence on the surface temperature of outdoor materials. In subtropical region, the materials with a higher specific heat capacity and a less time exposed to sunlight may be more beneficial to the building thermal environment.

Effect of cefodizime and ceftriaxone on phagocytic function in patients with severe infections.

PubMed Central

Wenisch, C; Parschalk, B; Hasenhündl, M; Wiesinger, E; Graninger, W

1995-01-01

Thirty patients with severe bacterial infections were treated with 50 mg of cefodizime per kg of body weight once daily or 50 mg of ceftriaxone per kg once daily for 10 +/- 3 days. The effect of cefodizime and ceftriaxone on the phagocytic capacity and generation of reactive oxygen intermediates after phagocytosis by granulocytes was assessed prior to, during, and after therapy. Flow cytometry was used to study phagocytic capacity by measuring the uptake of fluorescein-labeled bacteria. The generation of reactive oxygen intermediates after phagocytosis was estimated by the quantification of the intracellular conversion of dihydrorhodamine 123 to rhodamine 123. Prior to therapy, patients in both groups exhibited a decreased capacity to phagocytize Escherichia coli and subsequently to generate reactive oxygen intermediates. Granulocyte function increased after the initiation of therapy and normalized within 7 days for the ceftriaxone-treated patients and within 3 days for the cefodizime group (P < 0.05). In the cefodizime group, an enhancement of phagocytic capacity was observed 14 days after the initiation of therapy (P < 0.05). Prior to therapy, phagocytic capacity was significantly correlated with the generation of reactive oxygen products (r = 0.674 and P < 0.005). PMID:7793871

Growing organizational capacity through a systems approach: one health network's experience.

PubMed

MacKenzie, Richard; Capuano, Terry; Durishin, Linda Drexinger; Stern, Glen; Burke, James B

2008-02-01

Hospitals are reporting unexpected surges in demand for services. Lehigh Valley Hospital challenged its clinical and administrative staff to increase capacity by at least 4% per year using an interdepartmental, systemwide initiative, Growing Organizational Capacity (GOC). Following a systemwide leadership retreat that yielded more than 1,000 ideas, the initiative's principal sponsor convened a cross-functional improvement team. During a two-year period, 17 projects were implemented. Using a complex systems approach, improvement ideas "emerged" from microsystems at the points of care. Through rigorous reporting and testing of process adaptations, need, data, and people drove innovation. Hundreds of multilevel clinical and administrative staff redesigned processes and roles to increase organizational capacity. Admissions rose by 6.1%, 5.5 %, 8.7%, 5.0%, and 3.8% in fiscal years 2003 through 2007, respectively. Process enhancements cost approximately $1 million, while increased revenues attributable to increased capacity totaled $2.5 million. Multiple, coordinated, and concurrent projects created a greater impact than that possible with a single project. GOC and its success, best explained in the context of complex adaptive systems and microsystem theories, are transferrable to throughput issues that challenge efficiency and effectiveness in other health care systems.

Capacity to improve fine motor skills in Williams syndrome.

PubMed

Berencsi, A; Gombos, F; Kovács, I

2016-10-01

Individuals with Williams syndrome (WS) are known to have difficulties in carrying out fine motor movements; however, a detailed behavioural profile of WS in this domain is still missing. It is also unknown how great the capacity to improve these skills with focused and extensive practice is. We studied initial performance and learning capacity in a sequential finger tapping (FT) task in WS and in typical development. Improvement in the FT task has been shown to be sleep dependent. WS subjects participating in the current study have also participated in earlier polysomnography studies, although not directly related to learning. WS participants presented with great individual variability. In addition to generally poor initial performance, learning capacity was also greatly limited in WS. We found indications that reduced sleep efficiency might contribute to this limitation. Estimating motor learning capacity and the depth of sleep disorder in a larger sample of WS individuals might reveal important relationships between sleep and learning, and contribute to efficient intervention methods improving skill acquisition in WS. © 2016 The Authors. Journal of Intellectual Disability Research published by MENCAP and International Association of the Scientific Study of Intellectual and Developmental Disabilities and John Wiley & Sons Ltd.

From 'what' to 'how' -- capacity building in health promotion for HIV/AIDS prevention in the Solomon Islands.

PubMed

McPhail-Bell, Karen; MacLaren, David; Isihanua, Angela; MacLaren, Michelle

2007-09-01

This paper describes a capacity building process undertaken within the HIV/AIDS prevention project of the Adventist Development and Relief Agency (ADRA) in the Solomon Islands. ADRA HIV/AIDS has recently reoriented its project structure, moving beyond its awareness raising approach to incorporate health promotion frameworks, theories, strategies and assumptions. These have been used to inform project practice in project planning, delivery and evaluation. This paper shares what has worked and not worked in the capacity building process, including a project evaluation of the initial HIV/AIDS awareness raising project and the application of a number of capacity building strategies, including utilising a volunteer Australian Youth Ambassador for Development (AYAD) funded by the Australian Agency for International Development (AusAID). Existing and new projects are outlined. The underlying theme is that any capacity building exercise must include structural support (e.g. management, national frameworks) to ensure the incorporation of new initiatives and approaches. With time this enables ownership by counterparts and external partnerships to develop. The presence of an AYAD volunteer has been an effective strategy to achieve this. Reflections from the evaluators, the AYAD volunteer and the HIV/AIDS team are included.

Microsized Porous SiOx@C Composites Synthesized through Aluminothermic Reduction from Rice Husks and Used as Anode for Lithium-Ion Batteries.

PubMed

Cui, Jinlong; Cui, Yongfu; Li, Shaohui; Sun, Hongliang; Wen, Zhongsheng; Sun, Juncai

2016-11-09

Microsized porous SiO x @C composites used as anode for lithium-ion batteries (LIBs) are synthesized from rice husks (RHs) through low-temperature (700 °C) aluminothermic reduction. The resulting SiO x @C composite shows mesoporous irregular particle morphology with a high specific surface area of 597.06 m 2 /g under the optimized reduction time. This porous SiO x @C composite is constructed by SiO x nanoparticles uniformly dispersed in the C matrix. When tested as anode material for LIBs, it displays considerable specific capacity (1230 mAh/g at a current density of 0.1 A/g) and excellent cyclic stability with capacity fading of less than 0.5% after 200 cycles at 0.8 A/g. The dramatic volume change for the Si anode during lithium-ion (Li + ) insertion and extraction can be successfully buffered because of the formation of Li 2 O and Li 4 SiO 4 during initial lithiation process and carbon coating layer on the surface of SiO x . The porous structure could also mitigate the volume change and mechanical strains and shorten the Li + diffusion path length. These characteristics improve the cyclic stability of the electrode. This low-cost and environment-friendly SiO x @C composite anode material exhibits great potential as an alternative for traditional graphite anodes.

Greater sensitivity of the cortical face processing system to perceptually-equated face detection

PubMed Central

Maher, S.; Ekstrom, T.; Tong, Y.; Nickerson, L.D.; Frederick, B.; Chen, Y.

2015-01-01

Face detection, the perceptual capacity to identify a visual stimulus as a face before probing deeper into specific attributes (such as its identity or emotion), is essential for social functioning. Despite the importance of this functional capacity, face detection and its underlying brain mechanisms are not well understood. This study evaluated the roles that the cortical face processing system, which is identified largely through studying other aspects of face perception, play in face detection. Specifically, we used functional magnetic resonance imaging (fMRI) to examine the activations of the fusifom face area (FFA), occipital face area (OFA) and superior temporal sulcus (STS) when face detection was isolated from other aspects of face perception and when face detection was perceptually-equated across individual human participants (n=20). During face detection, FFA and OFA were significantly activated, even for stimuli presented at perceptual-threshold levels, whereas STS was not. During tree detection, however, FFA and OFA were responsive only for highly salient (i.e., high contrast) stimuli. Moreover, activation of FFA during face detection predicted a significant portion of the perceptual performance levels that were determined psychophysically for each participant. This pattern of result indicates that FFA and OFA have a greater sensitivity to face detection signals and selectively support the initial process of face vs. non-face object perception. PMID:26592952

A theoretical model to determine the capacity performance of shape-specific electrodes

NASA Astrophysics Data System (ADS)

Yue, Yuan; Liang, Hong

2018-06-01

A theory is proposed to explain and predict the electrochemical process during reaction between lithium ions and electrode materials. In the model, the process of reaction is proceeded into two steps, surface adsorption and diffusion of lithium ions. The surface adsorption is an instantaneous process for lithium ions to adsorb onto the surface sites of active materials. The diffusion of lithium ions into particles is determined by the charge-discharge condition. A formula to determine the maximum specific capacity of active materials at different charging rates (C-rates) is derived. The maximum specific capacity is correlated to characteristic parameters of materials and cycling - such as size, aspect ratio, surface area, and C-rate. Analysis indicates that larger particle size or greater aspect ratio of active materials and faster C-rates can reduce maximum specific capacity. This suggests that reducing particle size of active materials and slowing the charge-discharge speed can provide enhanced electrochemical performance of a battery cell. Furthermore, the model is validated by published experimental results. This model brings new understanding in quantification of electrochemical kinetics and capacity performance. It enables development of design strategies for novel electrodes and future generation of energy storage devices.

40 CFR 60.2195 - What information must I submit prior to initial startup?

Code of Federal Regulations, 2011 CFR

2011-07-01

... initial startup? 60.2195 Section 60.2195 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY..., 2001 Recordkeeping and Reporting § 60.2195 What information must I submit prior to initial startup? You... startup. (a) The type(s) of waste to be burned. (b) The maximum design waste burning capacity. (c) The...

40 CFR 60.2195 - What information must I submit prior to initial startup?

Code of Federal Regulations, 2012 CFR

2012-07-01

... initial startup? 60.2195 Section 60.2195 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY..., 2001 Recordkeeping and Reporting § 60.2195 What information must I submit prior to initial startup? You... startup. (a) The type(s) of waste to be burned. (b) The maximum design waste burning capacity. (c) The...

40 CFR 60.2195 - What information must I submit prior to initial startup?

Code of Federal Regulations, 2010 CFR

2010-07-01

... initial startup? 60.2195 Section 60.2195 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY..., 2001 Recordkeeping and Reporting § 60.2195 What information must I submit prior to initial startup? You... startup. (a) The type(s) of waste to be burned. (b) The maximum design waste burning capacity. (c) The...

Rebamipide attenuates Helicobacter pylori CagA-induced self-renewal capacity via modulation of β-catenin signaling axis in gastric cancer-initiating cells.

PubMed

Kang, Dong Woo; Noh, Yu Na; Hwang, Won Chan; Choi, Kang-Yell; Min, Do Sik

2016-08-01

Rebamipide, a mucosal-protective agent, is used clinically for treatment of gastritis and peptic ulcers induced by Helicobacter pylori (H. pylori) which is associated with increased risk of gastric cancer. Although rebamipide is known to inhibit the growth of gastric cancer cells, the action mechanisms of rebamipide in gastric carcinogenesis remains elusive. Here, we show that rebamipide suppresses H. pylori CagA-induced β-catenin and its target cancer-initiating cells (C-IC) marker gene expression via upregulation of miRNA-320a and -4496. Rebamipide attenuated in vitro self-renewal capacity of H. pylori CagA-infected gastric C-IC via modulation of miRNA-320a/-4496-β-catenin signaling axis. Moreover, rebamipide enhanced sensitivity to chemotherapeutic drugs in CagA-expressed gastric C-IC. Furthermore, rebamipide suppressed tumor-initiating capacity of gastric C-IC, probably via suppression of CagA-induced C-IC properties. These data provide novel insights for the efficacy of rebamipide as a chemoprotective drug against H. pylori CagA-induced carcinogenic potential. Copyright © 2016 Elsevier Inc. All rights reserved.

49 CFR 179.200-14 - Expansion capacity.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Non-Pressure Tank Car Tanks (Classes DOT-111AW and 115AW) § 179.200-14 Expansion capacity. (a) Tanks shall have...

49 CFR 179.200-14 - Expansion capacity.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Non-Pressure Tank Car Tanks (Classes DOT-111AW and 115AW) § 179.200-14 Expansion capacity. (a) Tanks shall have...

49 CFR 179.200-14 - Expansion capacity.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Non-Pressure Tank Car Tanks (Classes DOT-111AW and 115AW) § 179.200-14 Expansion capacity. (a) Tanks shall have...

A study on specific heat capacities of Li-ion cell components and their influence on thermal management

NASA Astrophysics Data System (ADS)

Loges, André; Herberger, Sabrina; Seegert, Philipp; Wetzel, Thomas

2016-12-01

Thermal models of Li-ion cells on various geometrical scales and with various complexity have been developed in the past to account for the temperature dependent behaviour of Li-ion cells. These models require accurate data on thermal material properties to offer reliable validation and interpretation of the results. In this context a thorough study on the specific heat capacities of Li-ion cells starting from raw materials and electrode coatings to representative unit cells of jelly rolls/electrode stacks with lumped values was conducted. The specific heat capacity is reported as a function of temperature and state of charge (SOC). Seven Li-ion cells from different manufactures with different cell chemistry, application and design were considered and generally applicable correlations were developed. A 2D thermal model of an automotive Li-ion cell for plug-in hybrid electric vehicle (PHEV) application illustrates the influence of specific heat capacity on the effectivity of cooling concepts and the temperature development of Li-ion cells.

An institutional approach to support the conduct and use of health policy and systems research: The Nodal Institute in the Eastern Mediterranean Region.

PubMed

El-Jardali, Fadi; Saleh, Shadi; Khodor, Rawya; Abu Al Rub, Raeda; Arfa, Chokri; Ben Romdhane, Habiba; Hamadeh, Randah R

2015-10-01

The use of health policy and systems research (HPSR) to support decision making in health systems is limited in the Eastern Mediterranean Region (EMR). This is partly due to the lack of effective initiatives to strengthen regional HPSR capacities and promote its use in decision making. This paper offers a structured reflection on the establishment and core functioning of a HPSR Nodal Institute for the EMR with specific focus on the approach used to support the conduct and use of HPSR. It seeks to gain better understanding of the activities conducted by the Nodal Institute, the methods by which the Nodal Institute implemented these activities, and the outcomes of these activities. A multi-faceted approach was implemented by the Nodal Institute in collaboration with regional academic/research institutions, Sub-Nodes. The overall approach was a phased one that included the selection of Sub-Nodes, mapping of academic/research institutions in the EMR, stakeholders' meetings, and HPSR capacity building workshops, and culminated with a regional meeting. The mapping of academic/research institutions in the EMR resulted in the identification of 50 institutions, of which only 32 were engaged in HPSR. These institutions have the highest HPSR involvement in information/evidence (84%) and the lowest in human resources for health (34%). Their main HPSR focus areas included quality of healthcare services, patient safety, management of non-communicable diseases, and human resources for health. Regional HPSR challenges among these institutions were identified. The validation and ranking questionnaires resulted in the identification of country-specific HPSR priorities according to stakeholders in three countries. From these results, cross-cutting HPSR priorities among the countries related to primary healthcare, non-communicable diseases, human resources for health, as well as cross-cutting HPSR priorities among stakeholders and according to stakeholders of the countries, were extracted. The Nodal Institute in the EMR is a promising initiative to support the conduct and use of HPSR in health policies. The approach and findings reported in this paper allow for the development of opportunities towards the building of capacity for HPSR in the region and other countries and provide a roadmap for academic/research institutions interested in HPSR in the region.

Perceptual learning in Williams syndrome: looking beyond averages.

PubMed

Gervan, Patricia; Gombos, Ferenc; Kovacs, Ilona

2012-01-01

Williams Syndrome is a genetically determined neurodevelopmental disorder characterized by an uneven cognitive profile and surprisingly large neurobehavioral differences among individuals. Previous studies have already shown different forms of memory deficiencies and learning difficulties in WS. Here we studied the capacity of WS subjects to improve their performance in a basic visual task. We employed a contour integration paradigm that addresses occipital visual function, and analyzed the initial (i.e. baseline) and after-learning performance of WS individuals. Instead of pooling the very inhomogeneous results of WS subjects together, we evaluated individual performance by expressing it in terms of the deviation from the average performance of the group of typically developing subjects of similar age. This approach helped us to reveal information about the possible origins of poor performance of WS subjects in contour integration. Although the majority of WS individuals showed both reduced baseline and reduced learning performance, individual analysis also revealed a dissociation between baseline and learning capacity in several WS subjects. In spite of impaired initial contour integration performance, some WS individuals presented learning capacity comparable to learning in the typically developing population, and vice versa, poor learning was also observed in subjects with high initial performance levels. These data indicate a dissociation between factors determining initial performance and perceptual learning.

Mass flow of a volatile organic liquid mixture in soils

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gerstl, Z.; Galin, Ts.; Yaron, B.

1994-05-01

The flow of kerosene, a volatile organic liquid mixture (VOLM), was studied in loam and clay soils and in a medium sand. The kerosene residual capacity and conductivity were determined for all three media at different initial moisture contents and with kerosene of different compositions. The kerosene conductivity of the soil was found to be strongly influenced by the soil texture and initial moisture content as well as by the kerosene composition. The kerosene conductivity of the sand was two orders of magnitude greater than that of the soils and was unaffected by initial moisture contents as high as fieldmore » capacity. The kerosene conductivity of the loam soil was similar in oven dry and air dry soils, but increased significantly in soils at 70% and fun field capacity due to the Yuster effect. In the clay soil the kerosene conductivity of the air dry sod was four times that of the oven dry sod and increased somewhat in the soil at 70% field capacity. No kerosene flow was observed in the oven dry soil at full field capacity. The differences in kerosene conductivity in these soils and the effect of moisture content were attributed to the different pore-sin distributions of the soil& Changes in the composition of the kerosene due to volatilization of the light fractions resulted in increased viscosity of the residual kerosene. This increased viscosity affected the fluid properties of kerosene, which resulted in decreased kerosene conductivity in the sand and the soils. 29 refs., 4 figs., 4 tabs.« less

Implementing Health Impact Assessment Programs in State Health Agencies: Lessons Learned From Pilot Programs, 2009-2011.

PubMed

Goff, Nancy; Wyss, Kerry; Wendel, Arthur; Jarris, Paul

2016-01-01

Health Impact Assessment (HIA) has emerged as a promising tool to integrate health considerations into decision making. The growth and success of HIA practice in the United States will be dependent on building the capacity of practitioners. This article seeks to identify the role of state health agencies (SHAs) in building capacity for conducting HIAs and the key components of initiatives that produced effective HIAs and HIA programs. The authors proposed to answer 3 research questions: (1) What can be the role of the SHA in HIA? (2) What are the characteristics of successful state HIA programs? and (3) What are some effective strategies for building capacity for HIA in SHAs and local health departments? The authors reviewed program reports from the ASTHO's pilot state health agencies (California, Minnesota, Oregon, and Wisconsin) that, between 2009 and 2011, created HIA programs to provide HIA training, conduct HIAs, and build practitioner networks. Program reports were examined for shared themes on the role of SHAs in a statewide HIA initiative, the characteristics of successful programs, and effective strategies for building capacity. Despite differences among the programs, many shared themes existed. These include stressing the importance of a basic, sustained infrastructure for HIA practice; leveraging existing programs and networks; and working in partnership with diverse stakeholders. SHAs can build capacity for HIA, and SHAs can both lead and support the completion of individual HIAs. States and territories interested in starting comprehensive statewide HIA initiatives could consider implementing the strategies identified by the pilot programs.

18 CFR 157.36 - Open seasons for expansions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Open seasons for... GAS ACT Open Seasons for Alaska Natural Gas Transportation Projects § 157.36 Open seasons for expansions. Any open season for capacity exceeding the initial capacity of an Alaska natural gas...

18 CFR 157.36 - Open seasons for expansions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Open seasons for... GAS ACT Open Seasons for Alaska Natural Gas Transportation Projects § 157.36 Open seasons for expansions. Any open season for capacity exceeding the initial capacity of an Alaska natural gas...

18 CFR 157.36 - Open seasons for expansions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Open seasons for... GAS ACT Open Seasons for Alaska Natural Gas Transportation Projects § 157.36 Open seasons for expansions. Any open season for capacity exceeding the initial capacity of an Alaska natural gas...

18 CFR 157.36 - Open seasons for expansions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Open seasons for... GAS ACT Open Seasons for Alaska Natural Gas Transportation Projects § 157.36 Open seasons for expansions. Any open season for capacity exceeding the initial capacity of an Alaska natural gas...

18 CFR 157.36 - Open seasons for expansions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Open seasons for... GAS ACT Open Seasons for Alaska Natural Gas Transportation Projects § 157.36 Open seasons for expansions. Any open season for capacity exceeding the initial capacity of an Alaska natural gas...

The Initial Stage of a School's Capacity Building

ERIC Educational Resources Information Center

Stocklin, Sacha

2010-01-01

The rationale of this article is that schools and their leaders need to establish and formalize a system which focuses on integrating staff effectively into the organization's community and instituting esteem and competency. Competent educators in a professional community constitute two of the three dimensions that build the capacity to create…

Organizational Commitment, Knowledge Management Interventions, and Learning Organization Capacity

ERIC Educational Resources Information Center

Massingham, Peter; Diment, Kieren

2009-01-01

Purpose: The purpose of this paper is to examine the relationship between organizational commitment and knowledge management initiatives in developing learning organization capacity (LOC). Design/methodology/approach: This is an empirical study based on a single case study, using partial least squares (PLS) analysis. Findings: The strategic…

Oxidative Stress and Antioxidant System in Periodontitis

PubMed Central

Wang, Yue; Andrukhov, Oleh; Rausch-Fan, Xiaohui

2017-01-01

Periodontitis is a common inflammatory disease, which is initiated by bacterial infection and subsequently progressed by aberrant host response. It can result in the destruction of teeth supporting tissues and have an influence on systemic health. When periodontitis occurs, reactive oxygen species, which are overproduced mostly by hyperactive neutrophils, could not be balanced by antioxidant defense system and cause tissues damage. This is characterized by increased metabolites of lipid peroxidation, DNA damage and protein damage. Local and systemic activities of antioxidants can also be influenced by periodontitis. Total antioxidant capacity, total oxidant status and oxidative stress index have been used to evaluate the oxidative stress associated with periodontitis. Studies have confirmed that inflammatory response in periodontitis is associated with an increased local and systemic oxidative stress and compromised antioxidant capacity. Our review focuses on increased oxidative stress in periodontal disease, specifically, on the relationship between the local and systemic biomarkers of oxidative stress and periodontitis and their association with the pathogenesis of periodontitis. Also, the relationship between periodontitis and systemic inflammation, and the effects of periodontal therapy on oxidative stress parameters will be discussed. PMID:29180965

Distribution of human waste samples in relation to sizing waste processing in space

NASA Technical Reports Server (NTRS)

Parker, Dick; Gallagher, S. K.

1992-01-01

Human waste processing for closed ecological life support systems (CELSS) in space requires that there be an accurate knowledge of the quantity of wastes produced. Because initial CELSS will be handling relatively few individuals, it is important to know the variation that exists in the production of wastes rather than relying upon mean values that could result in undersizing equipment for a specific crew. On the other hand, because of the costs of orbiting equipment, it is important to design the equipment with a minimum of excess capacity because of the weight that extra capacity represents. A considerable quantity of information that had been independently gathered on waste production was examined in order to obtain estimates of equipment sizing requirements for handling waste loads from crews of 2 to 20 individuals. The recommended design for a crew of 8 should hold 34.5 liters per day (4315 ml/person/day) for urine and stool water and a little more than 1.25 kg per day (154 g/person/day) of human waste solids and sanitary supplies.

Short-Term Hurricane Impacts on a Neotropical Community of Marked Birds and Implications for Early-Stage Community Resilience

PubMed Central

Johnson, Andrew B.; Winker, Kevin

2010-01-01

Populations in fragmented ecosystems risk extirpation through natural disasters, which must be endured rather than avoided. Managing communities for resilience is thus critical, but details are sketchy about the capacity for resilience and its associated properties in vertebrate communities. We studied short-term resilience in a community of individually marked birds, following this community through the catastrophic destruction of its forest habitat by Hurricane Iris in Belize, Central America. We sampled for 58 d immediately before the storm, 28 d beginning 11 d after Hurricane Iris, and for 69 d approximately one year later. Our data showed that the initial capacity for resilience was strong. Many banded individuals remained after the storm, although lower post-hurricane recapture rates revealed increased turnover among individuals. Changes occurred in community dynamics and in abundances among species and guilds. Survivors and immigrants both were critical components of resilience, but in a heterogeneous, species-specific manner. Delayed effects, including higher fat storage and increased species losses, were evident one year later. PMID:21152062

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, Gui-Liang; Chen, Zonghai; Zhong, Gui-Ming

Sodium-ion batteries are promising alternatives to lithium-ion batteries for large-scale applications. However, the low capacity and poor rate capability of existing anodes for sodium-ion batteries are bottlenecks for future developments. Here, we report a high performance nanostructured anode material for sodium-ion batteries that is fabricated by high energy ball milling to form black phosphorus/Ketjenblack–multiwalled carbon nanotubes (BPC) composite. With this strategy, the BPC composite with a high phosphorus content (70 wt %) could deliver a very high initial Coulombic efficiency (>90%) and high specific capacity with excellent cyclability at high rate of charge/discharge (~1700 mAh g–1 after 100 cycles atmore » 1.3 A g–1 based on the mass of P). In situ electrochemical impedance spectroscopy, synchrotron high energy X-ray diffraction, ex situ small/wide-angle X-ray scattering, high resolution transmission electronic microscopy, and nuclear magnetic resonance were further used to unravel its superior sodium storage performance. The scientific findings gained in this work are expected to serve as a guide for future design on high performance anode material for sodium-ion batteries.« less

Perceptions of strengths and deficiencies: Disconnects between graduate students and prospective employers

USGS Publications Warehouse

Sundberg, M.D.; Deangelis, P.; Havens, K.; Holsinger, K.; Kennedy, K.; Kramer, A.T.; Muir, R.; Olwell, P.; Schierenbeck, K.; Stritch, L.; Zorn-Arnold, B.

2011-01-01

The US Botanical Capacity Assessment Project (BCAP) was initiated as a first step to gauge the nation's collective ability to meet the environmental challenges of the 21st century. The project, in which the authors of this article are involved, specifically aimed to identify multisector contributions to and gaps in botanical capacity in order to develop growth opportunities to address research and management problems. One of the primary gaps revealed by the BCAP surveys was that the skills graduate students identified as their greatest strengths closely matched the areas future employers (government and private sectors) identified as needing greatest improvement. Although our survey focused on only one discipline (botany), we suspect that the results are applicable throughout the science, technology, engineering, and mathematics disciplines. We suggest that it is critical for university faculty and administrators to team with professionals from government, nonprofit, and for-profit organizations to identify critical and desired knowledge and skill sets and implement the necessary curriculum changes to provide graduates with the tools they need. ?? 2011 by American Institute of Biological Sciences. All rights reserved.

Short-term hurricane impacts on a neotropical community of marked birds and implications for early-stage community resilience.

PubMed

Johnson, Andrew B; Winker, Kevin

2010-11-30

Populations in fragmented ecosystems risk extirpation through natural disasters, which must be endured rather than avoided. Managing communities for resilience is thus critical, but details are sketchy about the capacity for resilience and its associated properties in vertebrate communities. We studied short-term resilience in a community of individually marked birds, following this community through the catastrophic destruction of its forest habitat by Hurricane Iris in Belize, Central America. We sampled for 58 d immediately before the storm, 28 d beginning 11 d after Hurricane Iris, and for 69 d approximately one year later. Our data showed that the initial capacity for resilience was strong. Many banded individuals remained after the storm, although lower post-hurricane recapture rates revealed increased turnover among individuals. Changes occurred in community dynamics and in abundances among species and guilds. Survivors and immigrants both were critical components of resilience, but in a heterogeneous, species-specific manner. Delayed effects, including higher fat storage and increased species losses, were evident one year later.

Facile synthesis of Nb2O5 nanobelts assembled from nanorods and their applications in lithium ion batteries

NASA Astrophysics Data System (ADS)

Liu, Xiaodi; Liu, Guangyin; Chen, Hao; Ma, Jianmin; Zhang, Ruixue

2017-12-01

Hierarchical 1D Nb2O5 nanobelts are successfully synthesized via a facile solvothermal method and following thermal treatment. The as-formed Nb2O5 nanobelts are characterized by XRD, FESEM, TEM, and BET, and the results indicate that they possess pseudohexagonal structure and are composed of ultranarrow nanorods with an average diameter of ca. 15 nm. When used as anodic materials for lithium ion batteries, the obtained Nb2O5 nanobelts can deliver initial discharge capacities of 209.3 mAh g-1 at the current density of 0.5 C. In addition, the Nb2O5 nanobelts exhibit a reversible capacity of 95.8 mAh g-1 after 200 cycles at relatively high current density of 5 C. The good electrochemical performance of the Nb2O5 nanobelts may be ascribed to their good monodispersity, high specific surface areas, and narrow rod-like building blocks. The Nb2O5 nanobelts can be developed as promising anodes for high-rate 2 V LIBs with good safety.

Suppression of Myc oncogenic activity by ribosomal protein haploinsufficiency

PubMed Central

Barna, Maria; Pusic, Aya; Zollo, Ornella; Costa, Maria; Kondrashov, Nadya; Rego, Eduardo; Rao, Pulivarthi H; Ruggero, Davide

2008-01-01

The Myc oncogene regulates the expression of multiple components of the protein synthetic machinery, including ribosomal proteins, initiation factors of translation, Pol III, and rDNA1,2. An outstanding question is whether and how increasing the cellular protein synthesis capacity can affect the multi-step process leading to cancer. We utilized ribosomal protein heterozygote mice as a genetic tool to restore increased protein synthesis in Eμ–Myc/+ transgenic mice to normal levels and show that in this context Myc's oncogenic potential is suppressed. Our findings demonstrate that the ability of Myc to increase protein synthesis directly augments cell size and is sufficient to accelerate cell cycle progression independently of known cell cycle targets transcriptionally regulated by Myc. In addition, when protein synthesis is restored to normal levels, Myc overexpressing precancerous cells are more efficiently eliminated by programmed cell death. Our findings reveal a novel paradigm that links increases in general protein synthesis rates downstream of an oncogenic signal to a specific molecular impairment in the modality of translation initiation employed to regulate the expression of selective mRNAs. We show that an aberrant increase in cap-dependent translation downstream Myc hyperactivation specifically impairs the translational switch to internal ribosomal entry site (IRES)-dependent translation required for accurate mitotic progression. Failure of this translational switch results in reduced mitotic-specific expression of the endogenous IRES-dependent form of Cdk11 (p58-PITSLRE)3-5, which leads to cytokinesis defects and is associated with increased centrosome numbers and genome instability in Eμ–Myc/+ mice. When accurate translational control is re-established in Eμ–Myc/+ mice, genome instability is suppressed. Our findings reveal how perturbations in translational control provide a highly specific outcome on gene expression, genome stability, and cancer initiation that have important implications for understanding the molecular mechanism of cancer formation at the post-genomic level. PMID:19011615

A Culturally-Specific Dance Intervention to Increase Functional Capacity in African American Women

PubMed Central

Murrock, Carolyn J.; Gary, Faye A.

2013-01-01

This study examined a culturally-specific dance intervention on functional capacity in African American women at three time points. The intervention was two times per week for 8 weeks using two African American churches randomly assigned to either the experimental or comparison group, had 126 participants, ages 36–82 years. Analysis of covariance revealed that both groups improved over time and the only significant difference between groups was at 18 weeks. The increase at 18 weeks in the experimental group remained when controlling for baseline covariates. This study supported culturally-specific dance as an intervention to improve functional capacity in African American women. PMID:19202718

A culturally-specific dance intervention to increase functional capacity in African American women.

PubMed

Murrock, Carolyn J; Gary, Faye A

2008-01-01

This study examined a culturally-specific dance intervention on functional capacity in African American women at three time points. The intervention was two times per week for 8 weeks using two African American churches randomly assigned to either the experimental or comparison group, had 126 participants, ages 36-82 years. Analysis of covariance revealed that both groups improved over time and the only significant difference between groups was at 18 weeks. The increase at 18 weeks in the experimental group remained when controlling for baseline covariates. This study supported culturally-specific dance as an intervention to improve functional capacity in African American women.

An intrinsically shielded hydrogel for the adsorptive recovery of lysozyme.

PubMed

Wang, Lu; Zhang, Rongsheng; Eisenthal, Robert; Hubble, John

2006-07-01

The present paper addresses the selective recovery of lysozyme from egg white using CM-dextran (carboxymethyldextran)-based hydrogels containing Cibacron Blue as an affinity ligand and co-immobilized BSA intended to act as a shielding agent to reduce non-specific adsorption. Initial studies using pure lysozyme were conducted that indicated that the adsorption capacity increased with ligand density and that adsorption was well described by a Langmuir-type isotherm. The inclusion of BSA as a putative shielding agent did not decrease the adsorption capacity for lysozyme in single-adsorbate experiments. To assess the effectiveness of the shielding strategy, subsequent experiments were conducted with both defined lysozyme/ovalbumin mixtures and hen's-egg white. From these studies, the optimal operating conditions for lysozyme recovery have been determined. These include: optimal initial egg-white concentration [a 10% (v/v) solution of native egg white in the chosen buffer], affinity-ligand density (1.86 mM) and ligand-to-shielding-agent ratio (4:1). The purity of lysozyme obtained from egg white was improved from 69% with a non-shielded hydrogel to 94% with an intrinsically shielded hydrogel. Finally, the possibility of using a protein, rather than dextran-backbone-based, hydrogel was investigated. It was found that BSA could take the place of CM-dextran as the gel backbone in a simplified synthesis, producing a gel which also proved effective for lysozyme recovery with a 30% lysozyme in egg-white solution purified to approx. 92% in a single adsorption-desorption cycle.

Oscillometric and spirometric bronchodilator response in preschool children with and without asthma

PubMed Central

Shin, Youn Ho; Jang, Sun Jung; Yoon, Jung Won; Jee, Hye Mi; Choi, Sun Hee; Yum, Hye Yung; Warburton, David; Han, Man Yong

2012-01-01

BACKGROUND: Bronchodilator responses (BDR) are routinely used in the diagnosis and management of asthma; however, their acceptability and repeatability have not been evaluated using quality control criteria for preschool children. OBJECTIVES: To compare conventional spirometry with an impulse oscillometry system (IOS) in healthy and asthmatic preschool children. METHODS: Data from 30 asthmatic children and 29 controls (two to six years of age) who underwent IOS and spirometry before and after salbutamol administration were analyzed. RESULTS: Stable asthmatic subjects significantly differed versus controls in their spirometry-assessed BDR (forced expiratory volume in 1 s [FEV1], forced vital capacity and forced expiratory flow at 25% to 75% of forced vital capacity) as well as their IOS-assessed BDR (respiratory resistance at 5 Hz [Rrs5], respiratory reactance at 5 Hz and area under the reactance curve). However, comparisons based on the area under the ROC curve for ΔFEV1 % initial versus ΔRrs5 % initial were 0.82 (95% CI 0.71 to 0.93) and 0.75 (95% CI 0.62 to 0.87), respectively. Moreover, the sensitivity and specificity for ΔFEV1 ≥9% were 0.53 and 0.93, respectively. Importantly, sensitivity increased to 0.63 when either ΔFEV1 ≥9% or ΔRrs5 ≥29% was considered as an additional criterion for the diagnosis of asthma. CONCLUSION: The accuracy of asthma diagnosis in preschool children may be increased by combining spirometry with IOS when measuring BDR. PMID:22891189

Progress in the Development of Lightweight Nickel Electrode for Nickel-Hydrogen Cell

NASA Technical Reports Server (NTRS)

Britton, Doris L.

1999-01-01

Development of a high specific energy battery is one of the objectives of the lightweight nickel-hydrogen (Ni-H2) program at the NASA Glenn Research Center. The approach has been to improve the nickel electrode by continuing combined in-house and contract efforts to develop a lighter weight electrode for the nickel-hydrogen cell. Small fiber diameter nickel plaques are used as conductive supports for the nickel hydroxide active material. These plaques are commercial products and have an advantage of increased surface area available for the deposition of active material. Initial tests include activation and capacity measurements at five different discharge levels, C/2, 1.0 C, 1.37 C, 2.0 C, and 2.74 C. The electrodes are life cycle tested using a half-cell configuration at 40 and 80% depths-of-discharge (DOD) in a low-Earth-orbit regime. The electrodes that pass the initial tests are life cycle-tested in a boiler plate nickel-hydrogen cell before flight weight design are built and tested.

No Adjuvant Effect of Bacillus thuringiensis-Maize on Allergic Responses in Mice

PubMed Central

Dekan, Gerhard; Epstein, Michelle M.

2014-01-01

Genetically modified (GM) foods are evaluated carefully for their ability to induce allergic disease. However, few studies have tested the capacity of a GM food to act as an adjuvant, i.e. influencing allergic responses to other unrelated allergens at acute onset and in individuals with pre-existing allergy. We sought to evaluate the effect of short-term feeding of GM Bacillus thuringiensis (Bt)-maize (MON810) on the initiation and relapse of allergic asthma in mice. BALB/c mice were provided a diet containing 33% GM or non-GM maize for up to 34 days either before ovalbumin (OVA)-induced experimental allergic asthma or disease relapse in mice with pre-existing allergy. We observed that GM-maize feeding did not affect OVA-induced eosinophilic airway and lung inflammation, mucus hypersecretion or OVA-specific antibody production at initiation or relapse of allergic asthma. There was no adjuvant effect upon GM-maize consumption on the onset or severity of allergic responses in a mouse model of allergic asthma. PMID:25084284

The legacy of the Child Health and Nutrition Research Initiative (CHNRI).

PubMed

Black, Robert E

2016-06-01

Under the Global Forum for Health Research, the Child Health and Nutrition Research Initiative (CHNRI) began its operations in 1999 and became a Swiss foundation in 2006. The vision of CHNRI was to improve child health and nutrition of all children in low- and middle-income countries (LMIC) through research that informs health policy and practice. Specific objectives included expanding global knowledge on childhood disease burden and cost-effectiveness of interventions, promoting priority setting in research, ensuring inclusion of institutions and scientists in LMIC in setting priorities, promoting capacity development in LMIC and stimulating donors and countries to increase resources for research. CHNRI created a knowledge network, funded research through multiple rounds of a global competitive process and published research papers and policy briefs. A signature effort was to develop a systematic methodology for prioritizing health and nutrition research investments. The "CHNRI method" has been extensively applied to global health problems and is now the most commonly used method for prioritizing health research questions.

Suppression of autophagy impedes glioblastoma development and induces senescence.

PubMed

Gammoh, Noor; Fraser, Jane; Puente, Cindy; Syred, Heather M; Kang, Helen; Ozawa, Tatsuya; Lam, Du; Acosta, Juan Carlos; Finch, Andrew J; Holland, Eric; Jiang, Xuejun

2016-09-01

The function of macroautophagy/autophagy during tumor initiation or in established tumors can be highly distinct and context-dependent. To investigate the role of autophagy in gliomagenesis, we utilized a KRAS-driven glioblastoma mouse model in which autophagy is specifically disrupted via RNAi against Atg7, Atg13 or Ulk1. Inhibition of autophagy strongly reduced glioblastoma development, demonstrating its critical role in promoting tumor formation. Further supporting this finding is the observation that tumors originating from Atg7-shRNA injections escaped the knockdown effect and thereby still underwent functional autophagy. In vitro, autophagy inhibition suppressed the capacity of KRAS-expressing glial cells to form oncogenic colonies or to survive low serum conditions. Molecular analyses revealed that autophagy-inhibited glial cells were unable to maintain active growth signaling under growth-restrictive conditions and were prone to undergo senescence. Overall, these results demonstrate that autophagy is crucial for glioma initiation and growth, and is a promising therapeutic target for glioblastoma treatment.

The value of demonstration projects for new interventions: The case of human papillomavirus vaccine introduction in low- and middle-income countries.

PubMed

Howard, N; Mounier-Jack, S; Gallagher, K E; Kabakama, S; Griffiths, U K; Feletto, M; LaMontagne, D S; Burchett, H E D; Watson-Jones, D

2016-09-01

Demonstration projects or pilots of new public health interventions aim to build learning and capacity to inform country-wide implementation. Authors examined the value of HPV vaccination demonstration projects and initial national programmes in low-income and lower-middle-income countries, including potential drawbacks and how value for national scale-up might be increased. Data from a systematic review and key informant interviews, analyzed thematically, included 55 demonstration projects and 8 national programmes implemented between 2007-2015 (89 years' experience). Initial demonstration projects quickly provided consistent lessons. Value would increase if projects were designed to inform sustainable national scale-up. Well-designed projects can test multiple delivery strategies, implementation for challenging areas and populations, and integration with national systems. Introduction of vaccines or other health interventions, particularly those involving new target groups or delivery strategies, needs flexible funding approaches to address specific questions of scalability and sustainability, including learning lessons through phased national expansion.

Pathological role of regulatory T cells in the initiation and maintenance of eczema herpeticum lesions.

PubMed

Takahashi, Ryo; Sato, Yohei; Kurata, Maiko; Yamazaki, Yoshimi; Kimishima, Momoko; Shiohara, Tetsuo

2014-02-01

It remains unknown why the occurrence of eczema herpeticum (EH) caused by an extensive disseminated cutaneous infection with HSV-1 or HSV-2 is associated with the exacerbation of atopic dermatitis lesions after withdrawal of treatment. Although regulatory T cells (Tregs) limit the magnitude of HSV-specific T cell responses in mice, their role in the induction and resolution of EH has not been defined. We initially investigated the frequencies, phenotype, and function of Tregs in the peripheral blood of atopic dermatitis with EH (ADEH) patients at onset and after clinical resolution, atopic dermatitis patients without EH, and healthy controls. Tregs with the skin-homing phenotype and the activated/induced phenotype were expanded at onset and contracted upon resolution. Treg-suppressive capacity was retained in ADEH patients and, the expanded Tregs suppressed IFN-γ production from HSV-1-specific CD8(+) and CD4(+) T cells. The increased frequency of CD14(dim)CD16(+) proinflammatory monocytes (pMOs) was also observed in the blood and EH skin lesions. Thus, pMOs detected in ADEH patients at onset were characterized by an increased ability to produce IL-10 and a decreased ability to produce proinflammatory cytokines, unlike their normal counterparts. Our coculture study using Tregs and pMOs showed that the pMOs can promote the expansion of inducible Tregs. Tregs were detected frequently in the vicinity of HSV-expressing and varicella zoster virus-expressing CD16(+) monocytes in the EH lesions. Expansions of functional Tregs, together with pMOs, initially required for ameliorating excessive inflammation occurring after withdrawal of topical corticosteroids could, in turn, contribute to the initiation and progression of HSV reactivation, resulting in the onset of EH.

High voltage and high specific capacity dual intercalating electrode Li-ion batteries

NASA Technical Reports Server (NTRS)

Blanco, Mario (Inventor); West, William C. (Inventor)

2010-01-01

The present invention provides high capacity and high voltage Li-ion batteries that have a carbonaceous cathode and a nonaqueous electrolyte solution comprising LiF salt and an anion receptor that binds the fluoride ion. The batteries can comprise dual intercalating electrode Li ion batteries. Methods of the present invention use a cathode and electrode pair, wherein each of the electrodes reversibly intercalate ions provided by a LiF salt to make a high voltage and high specific capacity dual intercalating electrode Li-ion battery. The present methods and systems provide high-capacity batteries particularly useful in powering devices where minimizing battery mass is important.

The Electrochemical Performance of Silicon Nanoparticles in Concentrated Electrolyte.

PubMed

Chang, Zeng-Hua; Wang, Jian-Tao; Wu, Zhao-Hui; Gao, Min; Wu, Shuai-Jin; Lu, Shi-Gang

2018-06-11

Silicon is a promising material for anodes in energy-storage devices. However, excessive growth of a solid-electrolyte interphase (SEI) caused by the severe volume change during the (de)lithiation processes leads to dramatic capacity fading. Here, we report a super-concentrated electrolyte composed of lithium bis(fluorosulfonyl)imide (LiFSI) and propylene carbonate (PC) with a molar ratio of 1:2 to improve the cycling performance of silicon nanoparticles (SiNPs). The SiNP electrode shows a remarkably improved cycling performance with an initial delithiation capacity of approximately 3000 mAh g -1 and a capacity of approximately 2000 mAh g -1 after 100 cycles, exhibiting about 6.8 times higher capacity than the cells with dilute electrolyte LiFSI-(PC) 8 . Raman spectra reveal that most of the PC solvent and FSI anions are complexed by Li + to form a specific solution structure like a fluid polymeric network. The reduction of FSI anions starts to play an important role owing to the increased concentration of contact ion pairs (CIPs) or aggregates (AGGs), which contribute to the formation of a more mechanically robust and chemically stable complex SEI layer. The complex SEI layer can effectively suppress the morphology evolution of silicon particles and self-limit the excessive growth, which mitigates the crack propagation of the silicon electrode and the deterioration of the kinetics. This study will provide a new direction for screening cycling-stable electrolytes for silicon-based electrodes. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Impact of kinetic mass transfer on free convection in a porous medium

NASA Astrophysics Data System (ADS)

Lu, Chunhui; Shi, Liangsheng; Chen, Yiming; Xie, Yueqing; Simmons, Craig T.

2016-05-01

We investigate kinetic mass transfer effects on unstable density-driven flow and transport processes by numerical simulations of a modified Elder problem. The first-order dual-domain mass transfer model coupled with a variable-density-flow model is employed to describe transport behavior in porous media. Results show that in comparison to the no-mass-transfer case, a higher degree of instability and more unstable system is developed in the mass transfer case due to the reduced effective porosity and correspondingly a larger Rayleigh number (assuming permeability is independent on the mobile porosity). Given a constant total porosity, the magnitude of capacity ratio (i.e., immobile porosity/mobile porosity) controls the macroscopic plume profile in the mobile domain, while the magnitude of mass transfer timescale (i.e., the reciprocal of the mass transfer rate coefficient) dominates its evolution rate. The magnitude of capacity ratio plays an important role on the mechanism driving the mass flux into the aquifer system. Specifically, for a small capacity ratio, solute loading is dominated by the density-driven transport, while with increasing capacity ratio local mass transfer dominated solute loading may occur at later times. At significantly large times, however, both mechanisms contribute comparably to solute loading. Sherwood Number could be a nonmonotonic function of mass transfer timescale due to complicated interactions of solute between source zone, mobile zone and immobile zone in the top boundary layer, resulting in accordingly a similar behavior of the total mass. The initial assessment provides important insights into unstable density-driven flow and transport in the presence of kinetic mass transfer.

Mechanically and chemically robust sandwich-structured C@Si@C nanotube array Li-ion battery anodes.

PubMed

Liu, Jinyun; Li, Nan; Goodman, Matthew D; Zhang, Hui Gang; Epstein, Eric S; Huang, Bo; Pan, Zeng; Kim, Jinwoo; Choi, Jun Hee; Huang, Xingjiu; Liu, Jinhuai; Hsia, K Jimmy; Dillon, Shen J; Braun, Paul V

2015-02-24

Stability and high energy densities are essential qualities for emerging battery electrodes. Because of its high specific capacity, silicon has been considered a promising anode candidate. However, the several-fold volume changes during lithiation and delithiation leads to fractures and continuous formation of an unstable solid-electrolyte interphase (SEI) layer, resulting in rapid capacity decay. Here, we present a carbon-silicon-carbon (C@Si@C) nanotube sandwich structure that addresses the mechanical and chemical stability issues commonly associated with Si anodes. The C@Si@C nanotube array exhibits a capacity of ∼2200 mAh g(-1) (∼750 mAh cm(-3)), which significantly exceeds that of a commercial graphite anode, and a nearly constant Coulombic efficiency of ∼98% over 60 cycles. In addition, the C@Si@C nanotube array gives much better capacity and structure stability compared to the Si nanotubes without carbon coatings, the ZnO@C@Si@C nanorods, a Si thin film on Ni foam, and C@Si and Si@C nanotubes. In situ SEM during cycling shows that the tubes expand both inward and outward upon lithiation, as well as elongate, and then revert back to their initial size and shape after delithiation, suggesting stability during volume changes. The mechanical modeling indicates the overall plastic strain in a nanotube is much less than in a nanorod, which may significantly reduce low-cycle fatigue. The sandwich-structured nanotube design is quite general, and may serve as a guide for many emerging anode and cathode systems.

Assessing the Performance of LED-Based Flashlights Available in the Kenyan Off-Grid Lighting Market

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tracy, Jennifer; Jacobson, Arne; Mills, Evan

Low cost rechargeable flashlights that use LED technology are increasingly available in African markets. While LED technology holds promise to provide affordable, high quality lighting services, the widespread dissemination of low quality products may make it difficult to realize this potential. This study includes performance results for three brands of commonly available LED flashlights that were purchased in Kenya in 2009. The performance of the flashlights was evaluated by testing five units for each of the three brands. The tests included measurements of battery capacity, time required to charge the battery, maximum illuminance at one meter, operation time and lux-hoursmore » from a fully charged battery, light distribution, and color rendering. All flashlights tested performed well below the manufacturers? rated specifications; the measured battery capacity was 30-50percent lower than the rated capacity and the time required to fully charge the battery was 6-25percent greater than the rated time requirement. Our analysis further shows that within each brand there is considerable variability in each performance indicator. The five samples within a single brand varied from each other by as much as 22percent for battery capacity measurements, 3.6percent for the number of hours required for a full charge, 23percent for maximum initial lux, 38percent for run time, 11percent for light distribution and by as much as 200percent for color rendering. Results obtained are useful for creating a framework for quality assurance of off-grid LED products and will be valuable for informing consumers, distributors and product manufacturers about product performance.« less

Novel multi-layered 1-D nanostructure exhibiting the theoretical capacity of silicon for a super-enhanced lithium-ion battery

NASA Astrophysics Data System (ADS)

Lee, Byoung-Sun; Yang, Ho-Sung; Jung, Heechul; Jeon, Seung-Yeol; Jung, Changhoon; Kim, Sang-Won; Bae, Jihyun; Choong, Chwee-Lin; Im, Jungkyun; Chung, U.-In; Park, Jong-Jin; Yu, Woong-Ryeol

2014-05-01

Silicon/carbon (Si/C) nanocomposites have recently received much attention as Li-ion battery negative electrodes due to their mutual synergetic effects in capacity and mechanical integrity. The contribution of Si to the total capacity of the Si/C nanocomposites determines their structural efficiency. Herein, we report on a multi-layered, one-dimensional nanostructure that exhibits the theoretical specific capacity of Si in the nanocomposite. Concentrically tri-layered, compartmentalized, C-core/Si-medium/C-shell nanofibers were fabricated by triple coaxial electrospinning. The pulverization of Si was accommodated inside the C-shell, whereas the conductive pathway of the Li-ions and electrons was provided by the C-core, which was proven by ex situ Raman spectroscopy. The compartmentalized Si in between the C-core and C-shell led to excellent specific capacity at a high current rate (>820 mA h g-1 at 12000 mA g-1) and the realization of the theoretical specific capacity of the Li15Si4 phase of Si nanoparticles (3627 mA h g-1). The electrochemical characterization and inductively coupled plasma-atomic emission spectrometry provided direct evidence of full participation of Si in the electrochemical reactions.Silicon/carbon (Si/C) nanocomposites have recently received much attention as Li-ion battery negative electrodes due to their mutual synergetic effects in capacity and mechanical integrity. The contribution of Si to the total capacity of the Si/C nanocomposites determines their structural efficiency. Herein, we report on a multi-layered, one-dimensional nanostructure that exhibits the theoretical specific capacity of Si in the nanocomposite. Concentrically tri-layered, compartmentalized, C-core/Si-medium/C-shell nanofibers were fabricated by triple coaxial electrospinning. The pulverization of Si was accommodated inside the C-shell, whereas the conductive pathway of the Li-ions and electrons was provided by the C-core, which was proven by ex situ Raman spectroscopy. The compartmentalized Si in between the C-core and C-shell led to excellent specific capacity at a high current rate (>820 mA h g-1 at 12000 mA g-1) and the realization of the theoretical specific capacity of the Li15Si4 phase of Si nanoparticles (3627 mA h g-1). The electrochemical characterization and inductively coupled plasma-atomic emission spectrometry provided direct evidence of full participation of Si in the electrochemical reactions. Electronic supplementary information (ESI) available: Simulation details, quantitative measurement of Si content in the nanofibers and ex situ Raman characterization sample preparation procedures are demonstrated. See DOI: 10.1039/c4nr00318g

The DELTA PREP Initiative: Accelerating Coalition Capacity for Intimate Partner Violence Prevention

PubMed Central

Zakocs, Ronda; Freire, Kimberley E.

2018-01-01

Background The DELTA PREP Project aimed to build the prevention capacity of 19 state domestic violence coalitions by offering eight supports designed to promote prevention integration over a 3-year period: modest grant awards, training events, technical assistance, action planning, coaching hubs, the Coalition Prevention Capacity Assessment, an online workstation, and the online documentation support system. Objectives Using quantitative and qualitative data, we sought to explain how coalitions integrated prevention within their structures and functions and document how DELTA PREP supports contributed to coalitions’ integration process. Results We found that coalitions followed a common pathway to integrate prevention. First, coalitions exhibited precursors of organizational readiness, especially having prevention champions. Second, coalitions engaged in five critical actions: engaging in dialogue, learning about prevention, forming teams, soliciting input from the coalition, and action planning. Last, by engaging in these critical actions, coalitions enhanced two key organizational readiness factors—developing a common understanding of prevention and an organizational commitment to prevention. We also found that DELTA PREP supports contributed to coalitions’ abilities to integrate prevention by supporting learning about prevention, fostering a prevention team, and engaging in action planning by leveraging existing opportunities. Two DELTA PREP supports—coaching hubs and the workstation—did not work as initially intended. From the DELTA PREP experience, we offer several lessons to consider when designing future prevention capacity-building initiatives. PMID:26245934

The DELTA PREP Initiative: Accelerating Coalition Capacity for Intimate Partner Violence Prevention.

PubMed

Zakocs, Ronda; Freire, Kimberley E

2015-08-01

The DELTA PREP Project aimed to build the prevention capacity of 19 state domestic violence coalitions by offering eight supports designed to promote prevention integration over a 3-year period: modest grant awards, training events, technical assistance, action planning, coaching hubs, the Coalition Prevention Capacity Assessment, an online workstation, and the online documentation support system. Using quantitative and qualitative data, we sought to explain how coalitions integrated prevention within their structures and functions and document how DELTA PREP supports contributed to coalitions' integration process. We found that coalitions followed a common pathway to integrate prevention. First, coalitions exhibited precursors of organizational readiness, especially having prevention champions. Second, coalitions engaged in five critical actions: engaging in dialogue, learning about prevention, forming teams, soliciting input from the coalition, and action planning. Last, by engaging in these critical actions, coalitions enhanced two key organizational readiness factors-developing a common understanding of prevention and an organizational commitment to prevention. We also found that DELTA PREP supports contributed to coalitions' abilities to integrate prevention by supporting learning about prevention, fostering a prevention team, and engaging in action planning by leveraging existing opportunities. Two DELTA PREP supports-coaching hubs and the workstation-did not work as initially intended. From the DELTA PREP experience, we offer several lessons to consider when designing future prevention capacity-building initiatives. © 2015 Society for Public Health Education.

An Objective Measure of Interconnection Usage for High Levels of Wind Integration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yasuda, Yoh; Gomez-Lazaro, Emilio; Holttinen, Hannele

2014-11-13

This paper analyzes selected interconnectors in Europe using several evaluation factors; capacity factor, congested time, and congestion ratio. In a quantitative and objective evaluation, the authors propose to use publically available data on maximum net transmission capacity (NTC) levels during a single year to study congestion rates, realizing that the capacity factor depends upon the chosen capacity of the selected interconnector. This value will be referred to as 'the annual maximum transmission capacity (AMTC)', which gives a transparent and objective evaluation of interconnector usage based on the published grid data. While the method is general, its initial application is motivatedmore » by transfer of renewable energy.« less

Nocturnal Mnemonics: Sleep and Hippocampal Memory Processing

PubMed Central

Saletin, Jared M.; Walker, Matthew P.

2012-01-01

As critical as waking brain function is to learning and memory, an established literature now describes an equally important yet complementary role for sleep in information processing. This overview examines the specific contribution of sleep to human hippocampal memory processing; both the detriments caused by a lack of sleep, and conversely, the proactive benefits that develop following the presence of sleep. First, a role for sleep before learning is discussed, preparing the hippocampus for initial memory encoding. Second, a role for sleep after learning is considered, modulating the post-encoding consolidation of hippocampal-dependent memory. Third, a model is outlined in which these encoding and consolidation operations are symbiotically accomplished, associated with specific NREM sleep physiological oscillations. As a result, the optimal network outcome is achieved: increasing hippocampal independence and hence overnight consolidation, while restoring next-day sparse hippocampal encoding capacity for renewed learning ability upon awakening. Finally, emerging evidence is considered suggesting that, unlike previous conceptions, sleep does not universally consolidate all information. Instead, and based on explicit as well as saliency cues during initial encoding, sleep executes the discriminatory offline consolidation only of select information. Consequently, sleep promotes the targeted strengthening of some memories while actively forgetting others; a proposal with significant theoretical and clinical ramifications. PMID:22557988

Irrigation scheduling as affected by field capacity and wilting point water content from different data sources

USDA-ARS?s Scientific Manuscript database

Soil water content at field capacity and wilting point water content is critical information for irrigation scheduling, regardless of soil water sensor-based method (SM) or evapotranspiration (ET)-based method. Both methods require knowledge on site-specific and soil-specific Management Allowable De...

The Heat Is on: An Inquiry-Based Investigation for Specific Heat

ERIC Educational Resources Information Center

Herrington, Deborah G.

2011-01-01

A substantial number of upper-level science students and practicing physical science teachers demonstrate confusion about thermal equilibrium, heat transfer, heat capacity, and specific heat capacity. The traditional method of instruction, which involves learning the related definitions and equations, using equations to solve heat transfer…

49 CFR 179.201-10 - Water capacity marking.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 3 2013-10-01 2013-10-01 false Water capacity marking. 179.201-10 Section 179.201-10 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SPECIFICATIONS FOR TANK CARS Specifications for Non-Pressure Tank Car Tanks ...

Efficient initial attacks: analysis of capacity and funding provides insights to wildfire protection planning

Treesearch

Jeremy Fried; Paul Meznarich

2014-01-01

Large wildfires in the United States pose significant challenges to fire management agencies charged with protecting lives, property, and natural resources. A vigorous initial response to a wildfire, a process referred to as "initial attack," can greatly reduce the likelihood of the fire becoming larger and causing substantial damage. Successful...

Inhibition of Ape1 Redox Activity Promotes Odonto/osteogenic Differentiation of Dental Papilla Cells.

PubMed

Chen, Tian; Liu, Zhi; Sun, Wenhua; Li, Jingyu; Liang, Yan; Yang, Xianrui; Xu, Yang; Yu, Mei; Tian, Weidong; Chen, Guoqing; Bai, Ding

2015-12-07

Dentinogenesis is the formation of dentin, a substance that forms the majority of teeth, and this process is performed by odontoblasts. Dental papilla cells (DPCs), as the progenitor cells of odontoblasts, undergo the odontogenic differentiation regulated by multiple cytokines and paracrine signal molecules. Ape1 is a perfect paradigm of the function complexity of a biological macromolecule with two major functional regions for DNA repair and redox regulation, respectively. To date, it remains unclear whether Ape1 can regulate the dentinogenesis in DPCs. In the present study, we firstly examed the spatio-temporal expression of Ape1 during tooth germ developmental process, and found the Ape1 expression was initially high and then gradually reduced along with the tooth development. Secondly, the osteo/odontogenic differentiation capacity of DPCs was up-regulated when treated with either Ape1-shRNA or E3330 (a specific inhibitor of the Ape1 redox function), respectively. Moreover, we found that the canonical Wnt signaling pathway was activated in this process, and E3330 reinforced-osteo/odontogenic differentiation capacity was suppressed by Dickkopf1 (DKK1), a potent antagonist of canonical Wnt signaling pathway. Taken together, we for the first time showed that inhibition of Ape1 redox regulation could promote the osteo/odontogenic differentiation capacity of DPCs via canonical Wnt signaling pathway.

Building an Electronic Bridge via Ag Decoration To Enhance Kinetics of Iron Fluoride Cathode in Lithium-Ion Batteries.

PubMed

Li, Yu; Zhou, Xingzhen; Bai, Ying; Chen, Guanghai; Wang, Zhaohua; Li, Hui; Wu, Feng; Wu, Chuan

2017-06-14

As a typical multielectron cathode material for lithium-ion batteries, iron fluoride (FeF 3 ) and its analogues suffer from poor electronic conductivity and low actual specific capacity. Herein, we introduce Ag nanoparticles by silver mirror reaction into the FeF 3 ·0.33H 2 O cathode to build the electronic bridge between the solid (active materials) and liquid (electrolyte) interface. The crystal structures of as-prepared samples are characterized by X-ray diffraction and Rietveld refinement. Moreover, the density of states of FeF 3 ·0.33H 2 O and FeF 3 ·0.33H 2 O/Ag (Ag-decorated FeF 3 ·0.33H 2 O) samples are calculated using the first principle density functional theory. The FeF 3 ·0.33H 2 O/Ag cathodes exhibit significant enhancements on the electrochemical performance in terms of the cycle performance and rate capability, especially for the Ag-decorated amount of 5%. It achieves an initial capacity of 168.2 mA h g -1 and retains a discharge capacity of 128.4 mA h g -1 after 50 cycles in the voltage range of 2.0-4.5 V. It demonstrates that Ag decoration can reduce the band gap, improve electronic conductivity, and elevate intercalation/deintercalation kinetics.