Adaptation of Methanogenic Inocula to Anaerobic Digestion of Maize Silage

PubMed Central

Wojcieszak, Martyna; Pyzik, Adam; Poszytek, Krzysztof; Krawczyk, Pawel S.; Sobczak, Adam; Lipinski, Leszek; Roubinek, Otton; Palige, Jacek; Sklodowska, Aleksandra; Drewniak, Lukasz

2017-01-01

A well-balanced microbial consortium is crucial for efficient biogas production. In turn, one of a major factor that influence on the structure of anaerobic digestion (AD) consortium is a source of microorganisms which are used as an inoculum. This study evaluated the influence of inoculum sources (with various origin) on adaptation of a biogas community and the efficiency of the biomethanization of maize silage. As initial inocula for AD of maize silage the samples from: (i) an agricultural biogas plant (ABP) which utilizes maize silage as a main substrate, (ii) cattle slurry (CS), which contain elevated levels of lignocelluloses materials, and (iii) raw sewage sludge (RSS) with low content of plant origin materials were used. The adaptation of methanogenic consortia was monitored during a series of passages, and the functionality of the adapted consortia was verified through start-up operation of AD in two-stage reactors. During the first stages of the adaptation phase, methanogenic consortia occurred very slowly, and only after several passages did the microbial community adapts to allow production of biogas with high methane content. The ABP consortium revealed highest biogas production in the adaptation and in the start-up process. The biodiversity dynamics monitored during adaptation and start-up process showed that community profile changed in a similar direction in three studied consortia. Native communities were very distinct to each other, while at the end of the Phase II of the start-up process microbial diversity profile was similar in all consortia. All adopted bacterial communities were dominated by representatives of Porphyromonadaceae, Rikenellaceae, Ruminococcaceae, and Synergistaceae. A shift from low acetate-preferring acetoclastic Methanosaetaceae (ABP and RSS) and/or hydrogenotrophic Archaea, e.g., Methanomicrobiaceae (CS) prevailing in the inoculum samples to larger populations of high acetate-preferring acetoclastic Methanosarcinaceae was observed by the end of the experiment. As a result, three independent, functional communities that syntrophically produced methane from acetate (primarily) and H2/CO2, methanol and methylamines were adapted. This study provides new insights into the specific process by which different inocula sampled from typical methanogenic environments that are commonly used to initiate industrial installations gradually adapted to allow biogas production from maize silage. PMID:29033919

40 CFR 63.9535 - What notifications must I submit and when?

Code of Federal Regulations, 2010 CFR

2010-07-01

...(b)(2), if you start up your affected source before October 18, 2002, you must submit your initial... start up your new affected source on or after October 18, 2002, you must submit your initial... status before the close of business on the 30th calendar day following the completion of the initial...

Study of plasma start-up initiated by second harmonic electron cyclotron resonance heating on WEGA experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Preynas, M.; Laqua, H. P.; Otte, M.

Although both 1st harmonic ordinary mode (O1) and 2nd harmonic extra-ordinary mode (X2) have been successfully used to initiate pre-ionization and breakdown in many devices, a complete theoretical model is still missing to explain the success of this method. Moreover, some experimental observations are not completely understood, such as what occurs during the delay time between the turn-on of ECRH power and first signals of density or light measurements. Since during this free period the ECRH power has to be absorbed by in-vessel components, it is of prime importance to know what governs this delay time. Recently, dedicated start-up experimentsmore » have been performed on WEGA, using a 28 GHz ECRH system in X2-mode. This machine has the interesting capability to be run also as a tokamak allowing comparative experiments between stellarator (ι/2π > 0) and tokamak (ι/2π = 0) configurations. Different scans in heating power, neutral gas pressure, and rotational transform (ι) show clearly that the start-up is a two step process. A first step following the turn-on of the ECRH power during which no measurable electron density (or just above the noise level in some cases), ECE and radiated power is detected. Its duration depends strongly on the level of injected power. The second step corresponds to the gas ionization and plasma expansion phase, with a velocity of density build-up and filling-up of the vessel volume depending mainly on pressure, gas and rotational transform. Moreover, an interesting scenario of ECRH pre-ionization without loop voltage in tokamak configuration by applying a small optimal vertical field is relevant for start-up assistance on future experiments like ITER. The results from this experimental parametric study are useful for the modeling of the start-up assisted by the second harmonic electron cyclotron resonance heating. The aim of this work is to establish predictive scenarios for both ITER and W7-X operation.« less

Help Wanted: Exploring the Value of Entrepreneurial Mentoring at Start-Up

ERIC Educational Resources Information Center

Brodie, Jacqueline; Van Saane, Sebastiaan Huib; Osowska, Renata

2017-01-01

The purpose of the research presented in this article was to investigate the added value of mentoring for entrepreneurs during the start-up phase. This small-scale exploratory research focused on five start-up entrepreneurs in Scotland to determine the entrepreneurs' perceptions regarding the "added" value of their mentoring support. To…

Development of a cryogenic capillary pumped loop

NASA Astrophysics Data System (ADS)

Kroliczek, Edward J.; Cullimore, Brent

1996-03-01

This paper describes the initial development of a promising new cryogenic technology. Room temperature capillary pumped loops (CPLs), a derivative of heat pipe technology, have been under development for almost two decades and are emerging as a design solution for many spacecraft thermal control problems. While cryogenic capillary pumped loops have application to passive spacecraft radiators and to long term storage of cryogenic propellants and open-cycle coolants, their application to the integration of spacecraft cryocoolers has generated the most excitement. Without moving parts or complex controls, they are able to thermally connect redundant cryocoolers to a single remote load, eliminating thermal switches and providing mechanical isolation at the same time. Development of a cryogenic CPL (CCPL) presented some unique challenges including start-up from a super-critical state, the management of parasitic heat leaks and pressure containment at ambient temperatures. These challenges have been overcome with a novel design that requires no additional devices or preconditioning for start-up. This paper describes the design concept and development and results conducted under SBIR Phase I and Phase II.

Loop Heat Pipe Startup Behaviors

NASA Technical Reports Server (NTRS)

Ku, Jentung

2014-01-01

A loop heat pipe must start successfully before it can commence its service. The start-up transient represents one of the most complex phenomena in the loop heat pipe operation. This paper discusses various aspects of loop heat pipe start-up behaviors. Topics include the four start-up scenarios, the initial fluid distribution between the evaporator and reservoir that determines the start-up scenario, factors that affect the fluid distribution between the evaporator and reservoir, difficulties encountered during the low power start-up, and methods to enhance the start-up success. Also addressed are the thermodynamic constraint between the evaporator and reservoir in the loop heat pipe operation, the superheat requirement for nucleate boiling, pressure spike and pressure surge during the start-up transient, and repeated cycles of loop start-up andshutdown under certain conditions.

Formability and macroscopic shearing of a titanium alloy Ti-6Al-4V under channel die compression

NASA Astrophysics Data System (ADS)

Francillette, Henri; Garand, Christian

2017-10-01

The mechanical behavior of Ti-6Al-4V is analyzed using channel die compression tests at room temperature. Specimens were cut out from a starting sheet in order to consider samples with specific initial crystallographic textures. Three types of specimens are considered in the study using an angle θ defined with the initial directions LD0, TD0 and ND0 of the starting sheet. The following values of θ are considered : 0°, 45° and 90°. Plastic deformations up to 20% are considered. Several experimental techniques are used, namely optical microscopy, SEM and Xray diffraction for texture evolution. The true stress-strain curves are plotted and the shape change of the specimens is analyzed. A macroscopic shearing is observed for one the three types of initial textures considered, notably θ = 45°. To complete the study, the Taylor model is applied in order to compare the activation of the mechanisms of the α phase in the different specimens.

Motor power factor controller with a reduced voltage starter

NASA Technical Reports Server (NTRS)

Nola, F. J. (Inventor)

1981-01-01

A power factor type motor controller is disclosed in which the conventional power factor constant voltage command signal is replaced during a starting interval with a graduated control voltage. This continuation-impart of a pending patent application (Serial No. 199, 765: Three Phase Factor Controller) provides a means for modifying the operation of the system for a motor start-up interval of 5 to 30 second. Using a ramp generators, an initial ramp-like signal replaces a constant power factor signal supplied by a potentiometer. The ramp-like signal is applied to a 15 terminal where it is summed with an operating power factor signal from phase detectors in order to obtain a control signal for ultimately controlling SCR devices. The SCR devices are turned on at an advancing rate with time responsive to the combination signal described rather than simply a function of a ramp-like signal alone.

The effect of shot noise on the start up of the fundamental and harmonics in free-electron lasers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Freund, H. P.; Miner, W. H. Jr.; Giannessi, L.

2008-12-15

The problem of radiation start up in free-electron lasers (FELs) is important in the simulation of virtually all FEL configurations including oscillators and amplifiers in both seeded master oscillator power amplifier (MOPA) and self-amplified spontaneous emission (SASE) modes. Both oscillators and SASE FELs start up from spontaneous emission due to shot noise on the electron beam, which arises from the random fluctuations in the phase distribution of the electrons. The injected power in a MOPA is usually large enough to overwhelm the shot noise. However, this noise must be treated correctly in order to model the initial start up ofmore » the harmonics. In this paper, we discuss and compare two different shot noise models that are implemented in both one-dimensional wiggler-averaged (PERSEO) and non-wiggler-averaged (MEDUSA1D) simulation codes, and a three-dimensional non-wiggler-averaged (MEDUSA) formulation. These models are compared for examples describing both SASE and MOPA configurations in one dimension, in steady-state, and time-dependent simulations. Remarkable agreement is found between PERSEO and MEDUSA1D for the evolution of the fundamental and harmonics. In addition, three-dimensional correction factors have been included in the MEDUSA1D and PERSEO, which show reasonable agreement with MEDUSA for a sample MOPA in steady-state and time-dependent simulations.« less

The Perfect Pairing: The Adult Learner and the Boutique Winery in the Start-Up Phase

ERIC Educational Resources Information Center

Heath-Simpson, Delta F.

2011-01-01

The purpose of this phenomenological study was to understand and describe the lived experiences of adult learners who are owners and managers of small winery businesses operating in the start-up phase of the organizational life cycle. The study explored and identified the meaning of adult learning in the entrepreneurial context and its affect on…

Study of nanosecond discharges in H2-air mixtures at atmospheric pressure for plasma assisted combustion applications

NASA Astrophysics Data System (ADS)

Kobayashi, Sumire; Bonaventura, Zdeněk; Tholin, Fabien; Popov, Nikolay A.; Bourdon, Anne

2017-07-01

This paper presents 2D simulations of nanosecond discharges between two point electrodes for four different H2-air mixtures defined by their equivalence ratios ϕ (i.e. φ =0, air, φ =0.3, lean mixture, φ =1, stoichiometric mixture and φ =1.5, rich mixture) at atmospheric pressure and at an initial temperature of 1000 K. In a first step, we have shown that the mixture composition has only a very small influence on the discharge dynamics and structure during the streamer phase and up to the formation of the plasma channel between the two point electrodes in H2-air mixtures with φ \\in [0,1.5]. However, as the plasma channel is formed slightly earlier as the equivalence ratio increases, for a given voltage pulse, the duration of the nanosecond spark phase increases as the equivalence ratio increases. As expected, we have shown that excited states of N2 (and in particular N2(A)) and radicals (and in particular O(D), O(P), H and OH) are very efficiently produced during the voltage pulse after the start of the spark phase. After the voltage pulse, and up to 100 ns, the densities of excited states of N2 and of O(D) decrease. Conversely, most of the O(P), H and OH radicals are produced after the voltage pulse due to the dissociative quenching of electronically excited N2. As for radicals, the gas temperature starts increasing after the start of the spark phase. For all studied mixtures, the density of O(P) atoms and the gas temperature reach their maxima after the end of the voltage pulse and the densities of O(P), H and OH radicals and the maximal gas temperature increase as the equivalence ratio increases. We have shown that the production of radicals is the highest on the discharge axis and the distribution of species after the voltage pulse and up to 100 ns has a larger diameter between the electrodes than close to both electrode tips. As for species, the temperature distribution presents two hot spots close to the point electrode tips. The non-uniform distributions of radical densities and gas temperature obtained after the nanosecond voltage pulse provide accurate initial conditions for 2D reactive flow codes to study the combustion ignition on longer timescales and compare with experiments.

Manual of Considerations and Techniques for Start-Up of Municipal Wastewater Treatment Facilities.

ERIC Educational Resources Information Center

Rader, R. D.; And Others

This manual provides guidance for putting into initial operation a new municipal wastewater treatment plant, a new addition to an existing treatment plant, or a change in the mode of a treatment plant's operation. Information is provided on preparing for actual treatment plant start-up. Preparation for start-up includes: staffing the plant,…

40 CFR 63.7750 - What notifications must I submit and when?

Code of Federal Regulations, 2010 CFR

2010-07-01

... you start up your iron and steel foundry before April 22, 2004, you must submit your initial notification no later than August 20, 2004. (c) If you start up your new iron and steel foundry on or after... business on the 30th calendar day following completion of the initial compliance demonstration. (2) For...

Pressure-induced phase transitions in the CdC r2S e4 spinel

NASA Astrophysics Data System (ADS)

Efthimiopoulos, I.; Liu, Z. T. Y.; Kucway, M.; Khare, S. V.; Sarin, P.; Tsurkan, V.; Loidl, A.; Wang, Y.

2016-11-01

We have conducted high-pressure x-ray diffraction and Raman spectroscopic studies on the CdC r2S e4 spinel at room temperature up to 42 GPa. We have resolved three structural transitions up to 42 GPa, i.e., the starting F d 3 ¯m phase transforms at ˜11 GPa into a tetragonal I 41/a m d structure, an orthorhombic distortion was observed at ˜15 GPa , whereas structural disorder initiates beyond 25 GPa. Our ab initio density functional theory studies successfully reproduced the observed crystalline-to-crystalline structural transitions. In addition, our calculations propose an antiferromagnetic ordering as a potential magnetic ground state for the high-pressure tetragonal and orthorhombic modifications, compared with the starting ferromagnetic phase. Furthermore, the computational results indicate that all phases remain insulating in their stability pressure range, with a direct-to-indirect band gap transition for the F d 3 ¯m phase taking place at 5 GPa. We attempted also to offer an explanation behind the peculiar first-order character of the F d 3 ¯m (cubic ) →I 41/a m d (tetragonal) transition observed for several relevant Cr spinels, i.e., the sizeable volume change at the transition point, which is not expected from space group symmetry considerations. We detected a clear correlation between the cubic-tetragonal transition pressures and the next-nearest-neighbor magnetic exchange interactions for the Cr-bearing sulfide and selenide members, a strong indication that the cubic-tetragonal transitions in these systems are principally governed by magnetic effects.

Theoretical analysis of start-up power in helium pulsating heat pipe

NASA Astrophysics Data System (ADS)

Li, Monan; Huang, Rongjin; Xu, Dong; Li, Laifeng

2017-02-01

An analytical model for one-turn helium pulsating heat pipes (PHPs) with single liquid slug and vapor plug is established in present study. When an additional heat power takes place in the evaporating section, temperature and pressure will increase. The pressure wave travels through vapor and liquid phases at different speed, producing a pressure difference in the system, which acts as an exciting force to start up the oscillating motion. Results show that the start-up power of helium PHP is related to the filling ratio. The start-up power increases with the filling ration. However, there exist an upper limit. Furthermore, the start-up power also depends on the inclination angle of PHP. When the inclination angle increases, the heat input needed to start up the oscillating motion decreases. But for one-turn helium PHP, it can not be started up when the inclination angle is up to 90°, equalling to horizontal position,. While the inclination angle ranges between 0° (vertical position) and 75°, it can operate successfully.

Linkage of microbial kinetics and bacterial community structure of MBR and hybrid MBBR-MBR systems to treat salinity-amended urban wastewater.

PubMed

Rodriguez-Sanchez, Alejandro; Leyva-Diaz, Juan Carlos; Gonzalez-Martinez, Alejandro; Poyatos, Jose Manuel

2017-11-01

Three pilot-scale bioreactors were started up and operated under salinity-amended urban wastewater feeding. The bioreactors were configured as membrane bioreactor and two different hybrid, moving bed biofilm reactor-membrane bioreactor and operated with a hydraulic retention time of 9.5 h, a solid residence time of 11.75 days and a total solids concentration of 2500 mg L -1 . The three systems showed excellent performance in suspended solids, BOD 5 , and COD removal (values of 96-100%, 97-99%, and 88-90%, respectively), but poor nitrogen removal (values of 20-30%). The bacterial community structure during the start-up phase and the stabilization phase were different, as showed by β-diversity analyses. The differences between aerobic and anoxic biomass-and between suspended and attached biomass-were higher at the start-up phase than at the stabilization phase. The start-up phase showed high abundances of Chiayiivirga (mean values around 3-12% relative abundance) and Luteimonas (5-8%), but in the stabilization phase, the domination belonged to Thermomonas (3-14%), Nitrobacter (3-7%), Ottowia (3-11.5%), and Comamonas (2-6%), among others. Multivariate redundancy analyses showed that Thermomonas and Nitrosomonas were positively correlated with fast autotrophic kinetics, while Caulobacter and Ottowia were positively correlated with fast heterotrophic kinetics. Nitrobacter, Rhodanobacter, and Comamonas were positively correlated with fast autotrophic and heterotrophic kinetics. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1483-1495, 2017. © 2017 American Institute of Chemical Engineers.

A single center analysis of factors influencing study start-up timeline in clinical trials.

PubMed

Krafcik, Brianna M; Doros, Gheorghe; Malikova, Marina A

2017-11-01

Efficient start-up phase in clinical trials is crucial to execution. The goal was to determine factors contributing to delays. The start-up milestones were assessed for 38 studies and analyzed. Total start-up time was shorter for following studies: device trials, no outsourcing, fewer ancillary services used and in interventional versus observational designs. The use of a centralized Institutional Review Board (IRB) versus a local IRB reduced time to approval. Studies that never enrolled took longer on average to finalize their budget/contract, and obtain IRB than ones that did enroll. Different features of clinical trials can affect timeline of start-up process. An understanding of the impact of each feature allows for optimization.

The 'CommTech' Methodology: A Demand-Driven Approach to Efficient, Productive and Measurable Technology Transfer

NASA Technical Reports Server (NTRS)

Horsham, Gray A. P.

1998-01-01

Market research sources were used to initially gather primary technological problems and needs data from non-aerospace companies in targeted industry sectors. The company-supplied information served as input data to activate or start-up an internal, phased match-making process. This process was based on technical-level relationship exploration followed by business-level agreement negotiations, and culminated with project management and execution. Space Act Agreements represented near-term outputs. Company product or process commercialization derived from Lewis support and measurable economic effects represented far-term outputs.

Characteristics of adapted hydrogenotrophic community during biomethanation.

PubMed

Rachbauer, Lydia; Beyer, Reinhard; Bochmann, Günther; Fuchs, Werner

2017-10-01

The results presented in this study were carried out as concomitant experiments during the start-up and operation of a biomethanation unit to evaluate the effect of process parameters on carbon conversion, product formation (methane and acetate) and community composition. For that, two different samples were withdrawn from a trickle-bed reactor with immobilized enrichment culture of hydrogenotrophic methanogens adapted from sewage sludge. One sample was taken from the recirculation liquid during start-up phase while the other was withdrawn directly from the carrier material in the reactor. Elevated acid levels especially during start-up were shown to affect the overall carbon conversion. This effect was also seen during the acid tolerance testing reported here. Final acid concentrations of 1.6±0.3g/L resulted in a reduced conversion ratio of only 46%. Without acid addition complete conversion of CO 2 in the headspace was achieved. However, maximum methane production of 0.55±0.02mmol after 4days of incubation was monitored at moderate initial acetate concentration of 0.4g/L. In both analyzed inoculation materials Methanobacterium species were by far the most dominant Archaea with 21.8% in the recirculation liquid during start-up and 84.8% in the enrichment culture immobilized on the carrier material. The microbial composition of the two analyzed samples is in accordance with the results obtained for the carbon conversion and product formation. With approximately 50% of Bacteroidetes and Firmicutes present during reactor start-up the acetic acid production significantly contributed to the overall carbon conversion. In contrast, methane was produced almost exclusively in trials representing continuous operation where acetogenic bacteria accounted only up to 17.5%. In summary, the acid accumulation monitored during reactor start-up of a biomethanation unit is most likely to result from the microbial composition present. Nevertheless, complete adaptation to hydrogenotrophic conditions was proven to alter the consortium and yield methane as main product alongside high carbon conversion of up to 70.5±1.8%. Copyright © 2017 Elsevier B.V. All rights reserved.

Mechanism of phase control in a klystron-like relativistic backward wave oscillator by an input signal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xiao, Renzhen; Song, Zhimin; Deng, Yuqun

Theoretical analyses and particle-in-cell (PIC) simulations are carried out to understand the mechanism of microwave phase control realized by the external RF signal in a klystron-like relativistic backward wave oscillator (RBWO). Theoretical calculations show that a modulated electron beam can lead the microwave field with an arbitrary initial phase to the same equilibrium phase, which is determined by the phase factor of the modulated current, and the difference between them is fixed. Furthermore, PIC simulations demonstrate that the phase of input signal has a close relation to that of modulated current, which initiates the phase of the irregularly microwave duringmore » the build-up of oscillation. Since the microwave field is weak during the early time of starting oscillation, it is easy to be induced, and a small input signal is sufficient to control the phase of output microwave. For the klystron-like RBWO with two pre-modulation cavities and a reentrant input cavity, an input signal with 100 kW power and 4.21 GHz frequency can control the phase of 5 GW output microwave with relative phase difference less than 6% when the diode voltage is 760 kV, and beam current is 9.8 kA, corresponding to a power ratio of output microwave to input signal of 47 dB.« less

New Strategy for a Suitable Fast Stabilization of the Biomethanization Performance

PubMed Central

Fernández-Güelfo, L. A.; Álvarez-Gallego, C. J.; Sales Márquez, D.; Romero García, L. I.

2012-01-01

The start-up strategies for thermophilic anaerobic reactors usually consist of an initial mesophilic stage (35°C), with an approximate duration of 185 days, and a subsequent thermophilic stage (55°C), which normally requires around 60 days to achieve the system stabilizatio. During the first 8–10 days of the mesophilic stage, the reactor is not fed so that the inoculum, which is generally a mesophilic anaerobic sludge, may be adapted to the organic solid waste. Between mesophilic and thermophilic conditions the reactor is still not fed in an effort to prevent possible imbalances in the proces. As a consequence, the start-up and stabilization of the biomethanization performance described in the literature require, at least, around 245 days. In this sense, a new strategy for the start-up and stabilization phases is presented in this study. This approach allows an important reduction in the overall time necessary for these stages in an anaerobic continuous stirred tank reactor (CSTR) operated at thermophilic-dry conditions for treating the organic fraction of the municipal solid waste (OFMSW): 60 days versus 245 days of conventional strategies. The new strategy uses modified SEBAC technology to adapt an inoculum to the OFMSW and the operational conditions prior to seeding the CSTR. PMID:23193374

Efficient ECH-assisted plasma start-up using trapped particle configuration in the versatile experiment spherical torus

NASA Astrophysics Data System (ADS)

An, YoungHwa; Lee, Jeongwon; Jo, JongGab; Jung, Bong-Ki; Lee, HyunYeong; Chung, Kyoung-Jae; Na, Yong-Su; Hahm, T. S.; Hwang, Y. S.

2017-01-01

An efficient and robust ECH (electron cyclotron heating)-assisted plasma start-up scheme with a low loop voltage and low volt-second consumption utilizing the trapped particle configuration (TPC) has been developed in the versatile experiment spherical torus (VEST). The TPC is a mirror-like magnetic field configuration providing a vertical magnetic field in the same direction as the equilibrium field. It significantly enhances ECH pre-ionization with enhanced particle confinement due to its mirror effect, and intrinsically provides an equilibrium field with a stable decay index enabling prompt plasma current initiation. Consequently, the formation of TPC before the onset of the loop voltage allows the plasma to start up with a lower loop voltage and lower volt-second consumption as well as a wider operation range in terms of ECH pre-ionization power and H2 filling pressure. The TPC can improve the widely-used field null configuration significantly for more efficient start-up when ECH pre-ionization is used. This can then be utilized in superconducting tokamaks requiring a low loop voltage start-up, such as ITER, or in spherical tori with limited volt-seconds. The TPC can be particularly useful in superconducting tokamaks with a limited current slew-rate of superconducting PF coils, as it can save volt-second consumption before plasma current initiation by providing prompt initiation with an intrinsic stable equilibrium field.

Pushed or Pulled? Exploring the Factors Underpinning Graduate Start-Ups and Non-Start-Ups

ERIC Educational Resources Information Center

Nabi, G.; Walmsley, A.; Holden, R.

2015-01-01

The study explores the nature and mixture of push--pull factors in the journey from higher education into graduate entrepreneurship. Using longitudinal data from 15 graduates of a British university, it compares graduates who started their own business with graduates that did not. Importantly, both groups had initially indicated a strong desire to…

Challenges, successes and patterns of enrolment in the INSIGHT Strategic Timing of AntiRetroviral Treatment (START) trial.

PubMed

Grarup, J; Rappoport, C; Engen, N W; Carey, C; Hudson, F; Denning, E; Sharma, S; Florence, E; Vjecha, M J

2015-04-01

The aim of this report is to describe the challenges, successes and patterns of enrolment in the Strategic Timing of AntiRetroviral Treatment (START) study. START is a collaboration of many partners with central coordination provided by the protocol team, the statistical and data management centre (SDMC), the International Network for Strategic Initiatives in Global HIV Trials (INSIGHT) network leadership, international coordinating centres and site coordinating centres. The SDMC prepared reports on study accrual, baseline characteristics and site performance that allowed monitoring of enrolment and data quality and helped to ensure the successful enrolment of this large international trial. We describe the pattern of enrolment and challenges faced during the enrolment period of the trial. An initial pilot phase began in April 2009 and established feasibility of accrual at 101 sites. In August 2010, funding approval for an expanded definitive phase led to the successful accrual of 4688 participants from 215 sites in 35 countries by December 2013. Challenges to accrual included regulatory delays (e.g. national/local ethics approval and drug importation approval) and logistical obstacles (e.g. execution of contracts with pharmaceutical companies, setting up of a central drug repository and translation of participant materials). The personal engagement of investigators, strong central study coordination, and frequent and transparent communication with site investigators, community members and participants were key contributing factors to this success. Accrual into START was completed in a timely fashion despite multiple challenges. This success was attributable to the efforts of site investigators committed to maintaining study equipoise, transparent and responsive study coordination, and community involvement in problem-solving. © 2015 British HIV Association.

Challenges, successes and patterns of enrolment in the INSIGHT Strategic Timing of AntiRetroviral Treatment (START) trial

PubMed Central

Rappoport, C; Engen, NW; Carey, C; Hudson, F; Denning, E; Sharma, S; Florence, E; Vjecha, MJ

2015-01-01

Objectives The aim of this report is to describe the challenges, successes and patterns of enrolment in the Strategic Timing of AntiRetroviral Treatment (START) study. Methods START is a collaboration of many partners with central coordination provided by the protocol team, the statistical and data management centre (SDMC), the International Network for Strategic Initiatives in Global HIV Trials (INSIGHT) network leadership, international coordinating centres and site coordinating centres. The SDMC prepared reports on study accrual, baseline characteristics and site performance that allowed monitoring of enrolment and data quality and helped to ensure the successful enrolment of this large international trial. We describe the pattern of enrolment and challenges faced during the enrolment period of the trial. Results An initial pilot phase began in April 2009 and established feasibility of accrual at 101 sites. In August 2010, funding approval for an expanded definitive phase led to the successful accrual of 4688 participants from 215 sites in 35 countries by December 2013. Challenges to accrual included regulatory delays (e.g. national/local ethics approval and drug importation approval) and logistical obstacles (e.g. execution of contracts with pharmaceutical companies, setting up of a central drug repository and translation of participant materials). The personal engagement of investigators, strong central study coordination, and frequent and transparent communication with site investigators, community members and participants were key contributing factors to this success. Conclusions Accrual into START was completed in a timely fashion despite multiple challenges. This success was attributable to the efforts of site investigators committed to maintaining study equipoise, transparent and responsive study coordination, and community involvement in problem‐solving. PMID:25711319

Steam stripping of the unsaturated zone of contaminated sub-soils: The effect of diffusion/dispersion in the start-up phase

NASA Astrophysics Data System (ADS)

Brouwers, H. J. H.; Gilding, B. H.

2006-02-01

The unsteady process of steam stripping of the unsaturated zone of soils contaminated with volatile organic compounds (VOCs) is addressed. A model is presented. It accounts for the effects of water and contaminants remaining in vapour phase, as well as diffusion and dispersion of contaminants in this phase. The model has two components. The first is a one-dimensional description of the propagation of a steam front in the start-up phase. This is based on Darcy's law and conservation laws of mass and energy. The second component describes the transport of volatile contaminants. Taking the view that non-equilibrium between liquid and vapour phases exists, it accounts for evaporation, transport, and condensation at the front. This leads to a moving-boundary problem. The moving-boundary problem is brought into a fixed domain by a suitable transformation of the governing partial differential equations, and solved numerically. For a broad range of the governing dimensionless numbers, such as the Henry, Merkel and Péclet numbers, computational results are discussed. A mathematical asymptotic analysis supports this discussion. The range of parameter values for which the model is valid is investigated. Diffusion and dispersion are shown to be of qualitative importance, but to have little quantitative effect in the start-up phase.

A study of starting time in great hard X-ray flares

NASA Technical Reports Server (NTRS)

Klein, K. L.; Pick, M.; Magun, A.

1986-01-01

An analysis of the starting time in ten great hard X-ray bursts observed with the X-Ray Burst Spectrometer (HXRBS) is presented. It is shown that the impulsive phase of nine of them is composed of a preflash phase, during which the burst is observed up to an energy limit ranging from some tens of keV to 200 keV, followed ten to some tens of seconds afterwards by a flash phase, where the count rate rises simultaneously in all detector channels. For two events strong gamma-ray line emission is observed and is shown to start close to the onset of the flash phase.

Assessment of emissions and removal of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) at start-up periods in a hazardous waste incinerator.

PubMed

Karademir, Aykan; Korucu, M Kemal

2013-07-01

A study was conducted to observe the changes in polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/F) levels and congener profiles in the flue gas of a hazardous waste incinerator during two start-up periods. Flue gas samplings were performed simultaneously through Air Pollution Control Devices (APCDs) (including boiler outlet, electrostatic precipitator (ESP) outlet, wet scrubbers (WS) outlet, and activated carbon (AC) filter outlet) in different combustion temperatures during a planned cold (long) start-up and an unplanned warm (short) start-up. The results showed that PCDD/F concentrations could be elevated during the start-up periods up to levels 3-4 times higher than those observed in the normal operation. Especially lower combustion temperatures in the short start-ups may cause high PCDD/F concentrations in the raw flue gas. Assessment of combustion temperatures and Furans/Dioxins values indicated that surface-catalyzed de novo synthesis was the dominant pathway in the formation of PCDD/Fs in the combustion units. PCDD/F removal efficiencies of Air Pollution Control Devices suggested that formation by de novo synthesis existed in ESP also when in operation, leading to increase of gaseous phase PCDD/Fs in ESP Particle-bound PCDD/Fs were removed mainly by ESP and WS, while gaseous phase PCDD/Fs were removed by WS, and more efficiently by AC filter. This paper evaluates PCDD/F emissions and removal performances of APCDs (ESP, wet scrubbers, and activated carbon) during two start-up periods in an incinerator. The main implications are the following: (1) start-up periods increase PCDD/F emissions up to 2-3 times in the incinerator; (2) low combustion temperatures in start-ups cause high PCDD/F emissions in raw gas; (3) formation of PCDD/Fs by de novo synthesis occurs in ESP; (4) AC is efficient in removing gaseous PCDD/Fs, but may increase particle-bound ones; and (5) scrubbers remove both gaseous and particle-bound PCDD/Fs efficiently.

Simple descriptive missing data indicators in longitudinal studies with attrition, intermittent missing data and a high number of follow-ups.

PubMed

Wærsted, Morten; Børnick, Taran Svenssen; Twisk, Jos W R; Veiersted, Kaj Bo

2018-02-13

Missing data in longitudinal studies may constitute a source of bias. We suggest three simple missing data indicators for the initial phase of getting an overview of the missingness pattern in a dataset with a high number of follow-ups. Possible use of the indicators is exemplified in two datasets allowing wave nonresponse; a Norwegian dataset of 420 subjects examined at 21 occasions during 6.5 years and a Dutch dataset of 350 subjects with ten repeated measurements over a period of 35 years. The indicators Last response (the timing of last response), Retention (the number of responded follow-ups), and Dispersion (the evenness of the distribution of responses) are introduced. The proposed indicators reveal different aspects of the missing data pattern, and may give the researcher a better insight into the pattern of missingness in a study with several follow-ups, as a starting point for analyzing possible bias. Although the indicators are positively correlated to each other, potential predictors of missingness can have a different relationship with different indicators leading to a better understanding of the missing data mechanism in longitudinal studies. These indictors may be useful descriptive tools when starting to look into a longitudinal dataset with many follow-ups.

Numerical modeling of the waves evolution generated by the depressurization of the vessels containing a supercritical parameters coolant

NASA Astrophysics Data System (ADS)

Alekseev, Maksim V.; Vozhakov, Ivan S.; Lezhnin, Sergey I.; Pribaturin, Nikolay A.

2017-10-01

The development of power plants focuses on increasing the parameters of water coolants up to a supercritical level. Depressurization of the unit circuits with such a coolant leads to emergency situations. Their scenarios can change significantly with the variation of initial pressure and temperature before the start of depressurization. When the pressure drops from the supercritical single-phase region of the initial thermodynamic parameters of the coolant, either the liquid boils up, or the vapor is condensed. Because of the rapid pressure decrease, the phase transition can be non-equilibrium that must be taken into account in the simulation. In the present study, an axisymmetric problem of the outflow of a water coolant from the pipe butt-end is considered. The equations of continuity, momentum and energy for a two-phase homogeneous mixture are solved numerically. The vapor and liquid properties are calculated using the TTSE software package (The Tabular Taylor Series Expansion Method). On the basis of the computer complex LCPFCT (The Flux-Corrected Transport Algorithm) the program code was developed for solving numerous problems on the depressurization of vessels or pipelines, containing superheated water or gas under high pressure. Different variants of outflow in the external model atmosphere and generation of waves are analyzed. The calculated data on the interaction of pressure waves with a barrier are calculated. To describe phase transitions, an asymptotic relaxation model of nonequilibrium evaporation and condensation has been created and tested.

Characteristics of Young Children Exposed to Violence: The Safe Start Demonstration Project

ERIC Educational Resources Information Center

Kaufman, Joy S.; Ortega, Sandra; Schewe, Paul A.; Kracke, Kristen

2011-01-01

The Safe Start demonstration projects, funded by the Office of Juvenile Justice and Delinquency Prevention (OJJDP) under the first phase of the Safe Start initiative, are primarily designed to influence change at the systems or macrolevels to reduce the incidence of and impact of exposure to violence for children aged birth to 6 years; direct…

What time does the recovery phase of geomagnetic storms start: A superposed epoch analysis

NASA Astrophysics Data System (ADS)

Du, A.; Zhang, Y.; Ou, J.; Luo, H.

2015-12-01

It is well known that the recovery phase of the geomagnetic storms start during Dst reaches a minimum. This present paper is a discussion of recovery phase onset of a superposed epoch analysis of 247 storm events (-450 < Dst < -50 nT). The data of the solar wind parameters, the geomagnetic index AE and Dst are by means of 1 hour OMNI database. The energy budget for the driver and decay terms introduced by Burton et al. (1975) are checked. As might be expected, the recovery phase of geomagnetic storms starts when the decay term is greater than the driver term. The balance of the decay and driver terms is also dependent on the solar wind energy input during the initial phase. In general, at the onset of the recovery phase, EK-L decreases to 70% of a maximum of EK-L.

40 CFR 63.6645 - What notifications must I submit and when?

Code of Federal Regulations, 2010 CFR

2010-07-01

... standards. (b) As specified in § 63.9(b)(2), if you start up your stationary RICE with a site rating of more..., you must submit an Initial Notification not later than December 13, 2004. (c) If you start up your new... than 120 days after you become subject to this subpart. (d) As specified in § 63.9(b)(2), if you start...

Catalytic Ignition and Upstream Reaction Propagation in a Platinum Tube

NASA Technical Reports Server (NTRS)

Struk, P. M.; Dietrich, D. L.; Mellish, B. P.; Miller, F. J.; T'ien, J. S.

2007-01-01

A challenge for catalytic combustion in monolithic reactors at elevated temperatures is the start-up or "light-off" from a cold initial condition. In this work, we demonstrate a concept called "back-end catalytic ignition that potentially can be utilized in the light-off of catalytic monoliths. An external downstream flame or Joule heating raises the temperature of a small portion of the catalyst near the outlet initiating a localized catalytic reaction that propagates upstream heating the entire channel. This work uses a transient numerical model to demonstrate "back-end" ignition within a single channel which can characterize the overall performance of a monolith. The paper presents comparisons to an experiment using a single non-adiabatic channel but the concept can be extended to the adiabatic monolith case. In the model, the time scales associated with solid heat-up are typically several orders of magnitude larger than the gas-phase and chemical kinetic time-scales. Therefore, the model assumes a quasi-steady gas-phase with respect to a transient solid. The gas phase is one-dimensional. Appropriate correlations, however, account for heat and mass transfer in a direction perpendicular to the flow. The thermally-thin solid includes axial conduction. The gas phase, however, does not include axial conduction due to the high Peclet number flows. The model includes both detailed gas-phase and catalytic surface reactions. The experiment utilizes a pure platinum circular channel oriented horizontally though which a CO/O2 mixture (equivalence ratios ranging from 0.6 to 0.9) flows at 2 m/s.

Extended slow dynamical regime close to the many-body localization transition

NASA Astrophysics Data System (ADS)

Luitz, David J.; Laflorencie, Nicolas; Alet, Fabien

2016-02-01

Many-body localization is characterized by a slow logarithmic growth of the entanglement entropy after a global quantum quench while the local memory of an initial density imbalance remains at infinite time. We investigate how much the proximity of a many-body localized phase can influence the dynamics in the delocalized ergodic regime where thermalization is expected. Using an exact Krylov space technique, the out-of-equilibrium dynamics of the random-field Heisenberg chain is studied up to L =28 sites, starting from an initially unentangled high-energy product state. Within most of the delocalized phase, we find a sub-ballistic entanglement growth S (t ) ∝t1 /z with a disorder-dependent exponent z ≥1 , in contrast with the pure ballistic growth z =1 of clean systems. At the same time, anomalous relaxation is also observed for the spin imbalance I (t ) ∝t-ζ with a continuously varying disorder-dependent exponent ζ , vanishing at the transition. This provides a clear experimental signature for detecting this nonconventional regime.

Coupling of link- and node-ordering in the coevolving voter model.

PubMed

Toruniewska, J; Kułakowski, K; Suchecki, K; Hołyst, J A

2017-10-01

We consider the process of reaching the final state in the coevolving voter model. There is a coevolution of state dynamics, where a node can copy a state from a random neighbor with probabilty 1-p and link dynamics, where a node can rewire its link to another node of the same state with probability p. That exhibits an absorbing transition to a frozen phase above a critical value of rewiring probability. Our analytical and numerical studies show that in the active phase mean values of magnetization of nodes n and links m tend to the same value that depends on initial conditions. In a similar way mean degrees of spins up and spins down become equal. The system obeys a special statistical conservation law since a linear combination of both types magnetizations averaged over many realizations starting from the same initial conditions is a constant of motion: Λ≡(1-p)μm(t)+pn(t)=const., where μ is the mean node degree. The final mean magnetization of nodes and links in the active phase is proportional to Λ while the final density of active links is a square function of Λ. If the rewiring probability is above a critical value and the system separates into disconnected domains, then the values of nodes and links magnetizations are not the same and final mean degrees of spins up and spins down can be different.

Qualification of CASMO5 / SIMULATE-3K against the SPERT-III E-core cold start-up experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grandi, G.; Moberg, L.

SIMULATE-3K is a three-dimensional kinetic code applicable to LWR Reactivity Initiated Accidents. S3K has been used to calculate several international recognized benchmarks. However, the feedback models in the benchmark exercises are different from the feedback models that SIMULATE-3K uses for LWR reactors. For this reason, it is worth comparing the SIMULATE-3K capabilities for Reactivity Initiated Accidents against kinetic experiments. The Special Power Excursion Reactor Test III was a pressurized-water, nuclear-research facility constructed to analyze the reactor kinetic behavior under initial conditions similar to those of commercial LWRs. The SPERT III E-core resembles a PWR in terms of fuel type, moderator,more » coolant flow rate, and system pressure. The initial test conditions (power, core flow, system pressure, core inlet temperature) are representative of cold start-up, hot start-up, hot standby, and hot full power. The qualification of S3K against the SPERT III E-core measurements is an ongoing work at Studsvik. In this paper, the results for the 30 cold start-up tests are presented. The results show good agreement with the experiments for the reactivity initiated accident main parameters: peak power, energy release and compensated reactivity. Predicted and measured peak powers differ at most by 13%. Measured and predicted reactivity compensations at the time of the peak power differ less than 0.01 $. Predicted and measured energy release differ at most by 13%. All differences are within the experimental uncertainty. (authors)« less

Retention in care under universal antiretroviral therapy for HIV-infected pregnant and breastfeeding women ('Option B+') in Malawi.

PubMed

Tenthani, Lyson; Haas, Andreas D; Tweya, Hannock; Jahn, Andreas; van Oosterhout, Joep J; Chimbwandira, Frank; Chirwa, Zengani; Ng'ambi, Wingston; Bakali, Alan; Phiri, Sam; Myer, Landon; Valeri, Fabio; Zwahlen, Marcel; Wandeler, Gilles; Keiser, Olivia

2014-02-20

To explore the levels and determinants of loss to follow-up (LTF) under universal lifelong antiretroviral therapy (ART) for pregnant and breastfeeding women ('Option B+') in Malawi. We examined retention in care, from the date of ART initiation up to 6 months, for women in the Option B+ program. We analysed nationwide facility-level data on women who started ART at 540 facilities (n = 21,939), as well as individual-level data on patients who started ART at 19 large facilities (n = 11,534). Of the women who started ART under Option B+ (n = 21,939), 17% appeared to be lost to follow-up 6 months after ART initiation. Most losses occurred in the first 3 months of therapy. Option B+ patients who started therapy during pregnancy were five times more likely than women who started ART in WHO stage 3/4 or with a CD4 cell count 350 cells/μl or less, to never return after their initial clinic visit [odds ratio (OR) 5.0, 95% confidence interval (CI) 4.2-6.1]. Option B+ patients who started therapy while breastfeeding were twice as likely to miss their first follow-up visit (OR 2.2, 95% CI 1.8-2.8). LTF was highest in pregnant Option B+ patients who began ART at large clinics on the day they were diagnosed with HIV. LTF varied considerably between facilities, ranging from 0 to 58%. Decreasing LTF will improve the effectiveness of the Option B+ approach. Tailored interventions, like community or family-based models of care could improve its effectiveness.

Temperature fluctuation of the Iceland mantle plume through time

NASA Astrophysics Data System (ADS)

Spice, Holly E.; Fitton, J. Godfrey; Kirstein, Linda A.

2016-02-01

The newly developed Al-in-olivine geothermometer was used to find the olivine-Cr-spinel crystallization temperatures of a suite of picrites spanning the spatial and temporal extent of the North Atlantic Igneous Province (NAIP), which is widely considered to be the result of a deep-seated mantle plume. Our data confirm that start-up plumes are associated with a pulse of anomalously hot mantle over a large spatial area before becoming focused into a narrow upwelling. We find that the thermal anomaly on both sides of the province at Baffin Island/West Greenland and the British Isles at ˜61 Ma across an area ˜2000 km in diameter was uniform, with Al-in-olivine temperatures up to ˜300°C above that of average mid-ocean ridge basalt (MORB) primitive magma. Furthermore, by combining our results with geochemical data and existing geophysical and bathymetric observations, we present compelling evidence for long-term (>107 year) fluctuations in the temperature of the Iceland mantle plume. We show that the plume temperature fell from its initial high value during the start-up phase to a minimum at about 35 Ma, and that the mantle temperature beneath Iceland is currently increasing.

Simulations towards the achievement of non-inductive current ramp-up and sustainment in the National Spherical Torus Experiment Upgrade

DOE PAGES

Poli, F. M.; Andre, R. G.; Bertelli, N.; ...

2015-10-30

One of the goals of the National Spherical Torus Experiment Upgrade (NSTX-U) (Menard et al 2012 Nucl. Fusion 52 083015) is the demonstration of fully non-inductive start-up, current ramp-up and sustainment. This work discusses predictive simulations where the available heating and current drive systems are combined to maximize the non-inductive current and minimize the solenoidal contribution. Radio-frequency waves at harmonics higher than the ion cyclotron resonance (high-harmonic fast waves (HHFW)) and neutral beam injection are used to ramp the plasma current non-inductively starting from an initial Ohmic plasma. An interesting synergy is observed in the simulations between the HHFW andmore » electron cyclotron (EC) wave heating. Furthermore, time-dependent simulations indicate that, depending on the phasing of the HHFW antenna, EC wave heating can significantly increase the effectiveness of the radio-frequency power, by heating the electrons and increasing the current drive efficiency, thus relaxing the requirements on the level of HHFW power that needs to be absorbed in the core plasma to drive the same amount of fast-wave current.« less

Synchronous clock stopper for microprocessor

NASA Technical Reports Server (NTRS)

Kitchin, David A. (Inventor)

1985-01-01

A synchronous clock stopper circuit for inhibiting clock pulses to a microprocessor in response to a stop request signal, and for reinstating the clock pulses in response to a start request signal thereby to conserve power consumption of the microprocessor when used in an environment of limited power. The stopping and starting of the microprocessor is synchronized, by a phase tracker, with the occurrences of a predetermined phase in the instruction cycle of the microprocessor in which the I/O data and address lines of the microprocessor are of high impedance so that a shared memory connected to the I/O lines may be accessed by other peripheral devices. The starting and stopping occur when the microprocessor initiates and completes, respectively, an instruction, as well as before and after transferring data with a memory. Also, the phase tracker transmits phase information signals over a bus to other peripheral devices which signals identify the current operational phase of the microprocessor.

Application of intelligent soft start in asynchronous motor

NASA Astrophysics Data System (ADS)

Du, Xue; Ye, Ying; Wang, Yuelong; Peng, Lei; Zhang, Suying

2018-05-01

The starting way of three phase asynchronous motor has full voltage start and step-down start. Direct starting brings large current impact, causing excessive local temperature to the power grid and larger starting torque will also impact the motor equipment and affect the service life of the motor. Aim at the problem of large current and torque caused by start-up, an intelligent soft starter is proposed. Through the application of intelligent soft start on asynchronous motor, highlights its application advantage in motor control.

Comparative study on power generation of dual-cathode microbial fuel cell according to polarization methods.

PubMed

Lee, Kang-yu; Ryu, Wyan-seuk; Cho, Sung-il; Lim, Kyeong-ho

2015-11-01

Microbial fuel cells (MFCs) exist in various forms depending on the type of pollutant to be removed and the expected performance. Dual-cathode MFCs, with their simple structure, are capable of removing both organic matter and nitrogen. Moreover, various methods are available for the collection of polarization data, which can be used to calculate the maximum power density, an important factor of MFCs. Many researchers prefer the method of varying the external resistance in a single-cycle due to the short measurement time and high accuracy. This study compared power densities of dual-cathode MFCs in a single-cycle with values calculated over multi-cycles to determine the optimal polarization method. External resistance was varied from high to low and vice versa in the single-cycle, to calculate power density. External resistance was organized in descending order with initial start-up at open circuit voltage (OCV), and then it was organized in descending order again after the initial start-up at 1000 Ω. As a result, power density was underestimated at the anoxic cathode when the external resistance was varied from low to high, and overestimated at the aerobic cathode and anoxic cathode when external resistance at OCV was reduced following initial start-up. In calculating the power densities of dual-cathode MFCs, this paper recommends the method of gradually reducing the external resistance after initial start-up with high external resistance. Copyright © 2015 Elsevier Ltd. All rights reserved.

Motor starting a Brayton cycle power conversion system using a static inverter

NASA Technical Reports Server (NTRS)

Curreri, J. S.; Edkin, R. A.; Kruchowy, R.

1973-01-01

The power conversion module of a 2- to 15-kWe Brayton engine was motor started using a three-phase, 400-hertz static inverter as the power source. Motor-static tests were conducted for initial gas loop pressures of 10, 14, and 17 N/sq cm (15, 20, and 25 psia) over a range of initial turbine inlet temperatures from 366 to 550 K (200 to 530 F). The data are presented to show the effects of temperature and pressure on the motor-start characteristics of the rotating unit. Electrical characteristics during motoring are also discussed.

Developing Enterprise within Higher Education: Business Start-Up@Leeds. Met.

ERIC Educational Resources Information Center

Education + Training, 2003

2003-01-01

This issue on developing enterprise within higher education includes six articles on universities' partnerships, barriers to start-up and their effect on aspiring entrepreneurs, issues in marketing enterprise initiatives within a university, entrepreneurial summer school as a model for teaching, video as a teaching aid, and the role of personality…

PNNL Delivers Expertise, Technology to Biofuels Start-up, InEnTec

ScienceCinema

Surma, Jeff

2017-12-09

Initially through its Entrepreneurial Leave of Absence Program, PNNL gives biofuels innovators a start in opening up a new business based on technology developed for incinerating waste on the Hanford Site. Today, the companies Plasma Enhanced Melters are in operation around the world converting organic waste into valuable, clean fuels.

PLATINO, a nine-year follow-up study of COPD in the city of São Paulo, Brazil: the problem of underdiagnosis*

PubMed Central

Moreira, Graciane Laender; Manzano, Beatriz Martins; Gazzotti, Mariana Rodrigues; Nascimento, Oliver Augusto; Perez-Padilla, Rogelio; Menezes, Ana Maria Baptista; Jardim, José Roberto

2014-01-01

OBJECTIVE: To determine the underdiagnosis rate in new COPD cases at the end of a nine-year follow-up period-in the study designated "Projeto Latino-Americano de Investigação em Obstrução Pulmonar" (PLATINO, Latin-American Pulmonary Obstruction Investigation Project)-and compare that with the underdiagnosis rate during the initial phase of the study, as well as to identify the clinical features exhibited by the subjects who were not diagnosed until the end of the follow-up phase. METHODS: The study population comprised the 1,000 residents of the city of São Paulo, Brazil, who took part in the PLATINO study. Of those, 613 participated in the follow-up phase, during which the subjects were assessed with the same instruments and equipment employed in the initial phase of the study. We used the chi-square test or the independent sample t-test to analyze the underdiagnosis rate and to identify the characteristics of the subjects who were not diagnosed until the end of the follow-up phase. RESULTS: The underdiagnosis rate for new COPD cases at the end of the nine-year follow-up period was 70.0%. The underdiagnosis rate during the follow-up phase was 17.5% lower than that reported for the initial phase of the study. The subjects who were not diagnosed until the end of the follow-up phase presented with fewer respiratory symptoms, better pulmonary function, and less severe disease than did those previously diagnosed with COPD. CONCLUSIONS: The underdiagnosis rate for new COPD cases was lower in the follow-up phase of the study than in the initial phase. The subjects who were not diagnosed until the end of the follow-up phase of the PLATINO study presented with the same clinical profile as did those who were not diagnosed in the initial phase. These findings underscore the need for spirometry in order to confirm the diagnosis of COPD and provide early intervention. PMID:24626267

Implementation of the Short-Term Assessment of Risk and Treatability over two phases.

PubMed

Kroppan, Erik; Nonstad, Kåre; Iversen, Runar Busch; Søndenaa, Erik

2017-01-01

Over the last decade, the Short-Term Assessment of Risk and Treatability (START) has provided a strong evidence base to predict a range of problem behaviors. The implementation of START and adaptation of the services to the use of START have so far been sparsely described in the literature. The purpose of this study was to describe the continuation and the interdisciplinarity of risk assessments through the two phases. Over a period of 10 years, the forensic mental health services at Brøset has implemented START in two phases: initially with implementing the instrument (2005-2009) and secondarily by customizing the instrument to everyday treatment and planning (since 2009). This implementation was based on data from 887 START assessments for 181 patients over a decade (2005-2015). The results showed that the number of START assessments has been stable throughout the past 10 years and the interval between the ratings has decreased significantly ( p <0.05). The involvement by diversity of professionals has increased significantly over the two implementation phases. This study also addressed the continuity and organization of the implementation process and presented an overview of how START has been widespread in the service through treatment. The results showed an increased multidisciplinary participation and a continuing rate of assessments as the implementation progressed from assessment to a combined assessment-treatment phase.

Implementation of the Short-Term Assessment of Risk and Treatability over two phases

PubMed Central

Kroppan, Erik; Nonstad, Kåre; Iversen, Runar Busch; Søndenaa, Erik

2017-01-01

Background Over the last decade, the Short-Term Assessment of Risk and Treatability (START) has provided a strong evidence base to predict a range of problem behaviors. The implementation of START and adaptation of the services to the use of START have so far been sparsely described in the literature. The purpose of this study was to describe the continuation and the interdisciplinarity of risk assessments through the two phases. Methods Over a period of 10 years, the forensic mental health services at Brøset has implemented START in two phases: initially with implementing the instrument (2005–2009) and secondarily by customizing the instrument to everyday treatment and planning (since 2009). This implementation was based on data from 887 START assessments for 181 patients over a decade (2005–2015). Results The results showed that the number of START assessments has been stable throughout the past 10 years and the interval between the ratings has decreased significantly (p<0.05). The involvement by diversity of professionals has increased significantly over the two implementation phases. Conclusion This study also addressed the continuity and organization of the implementation process and presented an overview of how START has been widespread in the service through treatment. The results showed an increased multidisciplinary participation and a continuing rate of assessments as the implementation progressed from assessment to a combined assessment–treatment phase. PMID:28860799

USE OF INTEGRATED PLANNING TOOLS FOR REVITALIZATION: SMARTE (U.S.) AND START-UP PLAN (GERMANY)

EPA Science Inventory

The U.S.-German Bilateral Working Group produced two primary products during Phase 3 (2000-2005). SMARTe (Sustainable Management Approaches and Revitalization Tools-electronic) is being developed in the U.S. and the START-UP Plan is being...

Characterization of On-Orbit U.S. Lab Condensate Vacuum Venting

NASA Astrophysics Data System (ADS)

Schmidl, W. D.; Alred, J. A.; Mikatarian, R.; Soares, C.; Miles, E.

2002-01-01

The venting of liquid streams into a vacuum has been studied extensively for many years. An experiment was performed aboard the International Space Station (ISS) to video tape the U.S. Lab's condensate venting event with cameras located on the Space Station Remote Manipulator System (SSRMS). Images of the vent plume were acquired close to both the port and starboard vent nozzles. The imaging started with a wider view and then zoomed in closer before the shutdown phase of the vent event occurred. The objective of this experiment was to extend our understanding of the properties of venting liquids into space. Data from the video images were analyzed to obtain the approximate cone angle encompassing the core of the vent plume. The condensate vent plume was characterized as having three phases, a startup phase, a nominal phase, and a shutdown phase. The startup phase consisted of the initial period when the vent first started and the liquid first entered the heated line. The nominal phase was the period when the majority of the liquid was vented. The shutdown phase occurs close to the end of the vent event. The shutdown phase was further divided into two parts, the shutdown initial phase, and a later shutdown sputtering phase. The shutdown initial phase occurs when gas becomes entrained in the condensate liquid being vented. The sputtering phase occurred after the vent valve was closed, and the liquid/ice in the line was removed by continuing to heat the line to bake it out. It was determined that the ice particles were ejected at higher angles, but lower velocities, during the startup and shutdown phases. The number and velocities of ice particles ejected outside of the core region, during the startup, initial shutdown and shutdown sputtering phases were determined. The core of liquid ejected during the startup and shutdown phases was contained within a half cone angle of less than 60 degrees. The startup phase took approximately 36 seconds, the shutdown initial phase took approximately 22 seconds, and the shutdown sputtering phase took approximately 32 seconds. Results from the experiment were correlated with the Boeing ISS vent plume model.

Major results from the first plasma campaign of the Wendelstein 7-X stellarator

DOE PAGES

Wolf, R. C.; Ali, A.; Alonso, A.; ...

2017-07-27

Here, after completing the main construction phase of Wendelstein 7-X (W7-X) and successfully commissioning the device, first plasma operation started at the end of 2015. Integral commissioning of plasma start-up and operation using electron cyclotron resonance heating (ECRH) and an extensive set of plasma diagnostics have been completed, allowing initial physics studies during the first operational campaign. Both in helium and hydrogen, plasma breakdown was easily achieved. Gaining experience with plasma vessel conditioning, discharge lengths could be extended gradually. Eventually, discharges lasted up to 6 s, reaching an injected energy of 4 MJ, which is twice the limit originally agreedmore » for the limiter configuration employed during the first operational campaign. At power levels of 4 MW central electron densities reached 3 × 10 19 m –3, central electron temperatures reached values of 7 keV and ion temperatures reached just above 2 keV. Important physics studies during this first operational phase include a first assessment of power balance and energy confinement, ECRH power deposition experiments, 2nd harmonic O-mode ECRH using multi-pass absorption, and current drive experiments using electron cyclotron current drive. As in many plasma discharges the electron temperature exceeds the ion temperature significantly, these plasmas are governed by core electron root confinement showing a strong positive electric field in the plasma centre.« less

Major results from the first plasma campaign of the Wendelstein 7-X stellarator

NASA Astrophysics Data System (ADS)

Wolf, R. C.; Ali, A.; Alonso, A.; Baldzuhn, J.; Beidler, C.; Beurskens, M.; Biedermann, C.; Bosch, H.-S.; Bozhenkov, S.; Brakel, R.; Dinklage, A.; Feng, Y.; Fuchert, G.; Geiger, J.; Grulke, O.; Helander, P.; Hirsch, M.; Höfel, U.; Jakubowski, M.; Knauer, J.; Kocsis, G.; König, R.; Kornejew, P.; Krämer-Flecken, A.; Krychowiak, M.; Landreman, M.; Langenberg, A.; Laqua, H. P.; Lazerson, S.; Maaßberg, H.; Marsen, S.; Marushchenko, M.; Moseev, D.; Niemann, H.; Pablant, N.; Pasch, E.; Rahbarnia, K.; Schlisio, G.; Stange, T.; Pedersen, T. Sunn; Svensson, J.; Szepesi, T.; Trimino Mora, H.; Turkin, Y.; Wauters, T.; Weir, G.; Wenzel, U.; Windisch, T.; Wurden, G.; Zhang, D.; Abramovic, I.; Äkäslompolo, S.; Aleynikov, P.; Aleynikova, K.; Alzbutas, R.; Anda, G.; Andreeva, T.; Ascasibar, E.; Assmann, J.; Baek, S.-G.; Banduch, M.; Barbui, T.; Barlak, M.; Baumann, K.; Behr, W.; Benndorf, A.; Bertuch, O.; Biel, W.; Birus, D.; Blackwell, B.; Blanco, E.; Blatzheim, M.; Bluhm, T.; Böckenhoff, D.; Bolgert, P.; Borchardt, M.; Borsuk, V.; Boscary, J.; Böttger, L.-G.; Brand, H.; Brandt, Ch.; Bräuer, T.; Braune, H.; Brezinsek, S.; Brunner, K.-J.; Brünner, B.; Burhenn, R.; Buttenschön, B.; Bykov, V.; Calvo, I.; Cannas, B.; Cappa, A.; Carls, A.; Carraro, L.; Carvalho, B.; Castejon, F.; Charl, A.; Chernyshev, F.; Cianciosa, M.; Citarella, R.; Ciupiński, Ł.; Claps, G.; Cole, M.; Cole, M. J.; Cordella, F.; Cseh, G.; Czarnecka, A.; Czermak, A.; Czerski, K.; Czerwinski, M.; Czymek, G.; da Molin, A.; da Silva, A.; Dammertz, G.; Danielson, J.; de la Pena, A.; Degenkolbe, S.; Denner, P.; Dhard, D. P.; Dostal, M.; Drevlak, M.; Drewelow, P.; Drews, Ph.; Dudek, A.; Dundulis, G.; Durodie, F.; van Eeten, P.; Effenberg, F.; Ehrke, G.; Endler, M.; Ennis, D.; Erckmann, E.; Esteban, H.; Estrada, T.; Fahrenkamp, N.; Feist, J.-H.; Fellinger, J.; Fernandes, H.; Fietz, W. H.; Figacz, W.; Fontdecaba, J.; Ford, O.; Fornal, T.; Frerichs, H.; Freund, A.; Führer, M.; Funaba, T.; Galkowski, A.; Gantenbein, G.; Gao, Y.; García Regaña, J.; Garcia-Munoz, M.; Gates, D.; Gawlik, G.; Geiger, B.; Giannella, V.; Gierse, N.; Gogoleva, A.; Goncalves, B.; Goriaev, A.; Gradic, D.; Grahl, M.; Green, J.; Grosman, A.; Grote, H.; Gruca, M.; Guerard, C.; Haiduk, L.; Han, X.; Harberts, F.; Harris, J. H.; Hartfuß, H.-J.; Hartmann, D.; Hathiramani, D.; Hein, B.; Heinemann, B.; Heitzenroeder, P.; Henneberg, S.; Hennig, C.; Hernandez Sanchez, J.; Hidalgo, C.; Hölbe, H.; Hollfeld, K. P.; Hölting, A.; Höschen, D.; Houry, M.; Howard, J.; Huang, X.; Huber, M.; Huber, V.; Hunger, H.; Ida, K.; Ilkei, T.; Illy, S.; Israeli, B.; Ivanov, A.; Jablonski, S.; Jagielski, J.; Jelonnek, J.; Jenzsch, H.; Junghans, P.; Kacmarczyk, J.; Kaliatka, T.; Kallmeyer, J.-P.; Kamionka, U.; Karalevicius, R.; Kasahara, H.; Kasparek, W.; Kenmochi, N.; Keunecke, M.; Khilchenko, A.; Kinna, D.; Kleiber, R.; Klinger, T.; Knaup, M.; Kobarg, Th.; Köchl, F.; Kolesnichenko, Y.; Könies, A.; Köppen, M.; Koshurinov, J.; Koslowski, R.; Köster, F.; Koziol, R.; Krämer, M.; Krampitz, R.; Kraszewsk, P.; Krawczyk, N.; Kremeyer, T.; Krings, Th.; Krom, J.; Krzesinski, G.; Ksiazek, I.; Kubkowska, M.; Kühner, G.; Kurki-Suonio, T.; Kwak, S.; Lang, R.; Langish, S.; Laqua, H.; Laube, R.; Lechte, C.; Lennartz, M.; Leonhardt, W.; Lewerentz, L.; Liang, Y.; Linsmeier, Ch.; Liu, S.; Lobsien, J.-F.; Loesser, D.; Loizu Cisquella, J.; Lore, J.; Lorenz, A.; Losert, M.; Lubyako, L.; Lücke, A.; Lumsdaine, A.; Lutsenko, V.; Majano-Brown, J.; Marchuk, O.; Mardenfeld, M.; Marek, P.; Massidda, S.; Masuzaki, S.; Maurer, D.; McCarthy, K.; McNeely, P.; Meier, A.; Mellein, D.; Mendelevitch, B.; Mertens, Ph.; Mikkelsen, D.; Mishchenko, O.; Missal, B.; Mittelstaedt, J.; Mizuuchi, T.; Mollen, A.; Moncada, V.; Mönnich, T.; Morizaki, T.; Munk, R.; Murakami, S.; Musielok, F.; Náfrádi, G.; Nagel, M.; Naujoks, D.; Neilson, H.; Neubauer, O.; Neuner, U.; Ngo, T.; Nocentini, R.; Nührenberg, C.; Nührenberg, J.; Obermayer, S.; Offermanns, G.; Ogawa, K.; Ongena, J.; Oosterbeek, J. W.; Orozco, G.; Otte, M.; Pacios Rodriguez, L.; Pan, W.; Panadero, N.; Panadero Alvarez, N.; Panin, A.; Papenfuß, D.; Paqay, S.; Pavone, A.; Pawelec, E.; Pelka, G.; Peng, X.; Perseo, V.; Peterson, B.; Pieper, A.; Pilopp, D.; Pingel, S.; Pisano, F.; Plaum, B.; Plunk, G.; Povilaitis, M.; Preinhaelter, J.; Proll, J.; Puiatti, M.-E.; Sitjes, A. Puig; Purps, F.; Rack, M.; Récsei, S.; Reiman, A.; Reiter, D.; Remppel, F.; Renard, S.; Riedl, R.; Riemann, J.; Rimkevicius, S.; Riße, K.; Rodatos, A.; Röhlinger, H.; Romé, M.; Rong, P.; Roscher, H.-J.; Roth, B.; Rudischhauser, L.; Rummel, K.; Rummel, T.; Runov, A.; Rust, N.; Ryc, L.; Ryosuke, S.; Sakamoto, R.; Samartsev, A.; Sanchez, M.; Sano, F.; Satake, S.; Satheeswaran, G.; Schacht, J.; Schauer, F.; Scherer, T.; Schlaich, A.; Schlüter, K.-H.; Schmitt, J.; Schmitz, H.; Schmitz, O.; Schmuck, S.; Schneider, M.; Schneider, W.; Scholz, M.; Scholz, P.; Schrittwieser, R.; Schröder, M.; Schröder, T.; Schroeder, R.; Schumacher, H.; Schweer, B.; Shanahan, B.; Shikhovtsev, I. V.; Sibilia, M.; Sinha, P.; Sipliä, S.; Skodzik, J.; Slaby, C.; Smith, H.; Spiess, W.; Spong, D. A.; Spring, A.; Stadler, R.; Standley, B.; Stephey, L.; Stoneking, M.; Stridde, U.; Sulek, Z.; Surko, C.; Suzuki, Y.; Szabó, V.; Szabolics, T.; Szökefalvi-Nagy, Z.; Tamura, N.; Terra, A.; Terry, J.; Thomas, J.; Thomsen, H.; Thumm, M.; von Thun, C. P.; Timmermann, D.; Titus, P.; Toi, K.; Travere, J. M.; Traverso, P.; Tretter, J.; Tsuchiya, H.; Tsujimura, T.; Tulipán, S.; Turnyanskiy, M.; Unterberg, B.; Urban, J.; Urbonavicius, E.; Vakulchyk, I.; Valet, S.; van Millingen, B.; Vela, L.; Velasco, J.-L.; Vergote, M.; Vervier, M.; Vianello, N.; Viebke, H.; Vilbrandt, R.; Vorkörper, A.; Wadle, S.; Wagner, F.; Wang, E.; Wang, N.; Warmer, F.; Wegener, L.; Weggen, J.; Wei, Y.; Wendorf, J.; Werner, A.; Wiegel, B.; Wilde, F.; Winkler, E.; Winters, V.; Wolf, S.; Wolowski, J.; Wright, A.; Xanthopoulos, P.; Yamada, H.; Yamada, I.; Yasuhara, R.; Yokoyama, M.; Zajac, J.; Zarnstorff, M.; Zeitler, A.; Zhang, H.; Zhu, J.; Zilker, M.; Zimbal, A.; Zocco, A.; Zoletnik, S.; Zuin, M.

2017-10-01

After completing the main construction phase of Wendelstein 7-X (W7-X) and successfully commissioning the device, first plasma operation started at the end of 2015. Integral commissioning of plasma start-up and operation using electron cyclotron resonance heating (ECRH) and an extensive set of plasma diagnostics have been completed, allowing initial physics studies during the first operational campaign. Both in helium and hydrogen, plasma breakdown was easily achieved. Gaining experience with plasma vessel conditioning, discharge lengths could be extended gradually. Eventually, discharges lasted up to 6 s, reaching an injected energy of 4 MJ, which is twice the limit originally agreed for the limiter configuration employed during the first operational campaign. At power levels of 4 MW central electron densities reached 3  ×  1019 m-3, central electron temperatures reached values of 7 keV and ion temperatures reached just above 2 keV. Important physics studies during this first operational phase include a first assessment of power balance and energy confinement, ECRH power deposition experiments, 2nd harmonic O-mode ECRH using multi-pass absorption, and current drive experiments using electron cyclotron current drive. As in many plasma discharges the electron temperature exceeds the ion temperature significantly, these plasmas are governed by core electron root confinement showing a strong positive electric field in the plasma centre.

Major results from the first plasma campaign of the Wendelstein 7-X stellarator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wolf, R. C.; Ali, A.; Alonso, A.

Here, after completing the main construction phase of Wendelstein 7-X (W7-X) and successfully commissioning the device, first plasma operation started at the end of 2015. Integral commissioning of plasma start-up and operation using electron cyclotron resonance heating (ECRH) and an extensive set of plasma diagnostics have been completed, allowing initial physics studies during the first operational campaign. Both in helium and hydrogen, plasma breakdown was easily achieved. Gaining experience with plasma vessel conditioning, discharge lengths could be extended gradually. Eventually, discharges lasted up to 6 s, reaching an injected energy of 4 MJ, which is twice the limit originally agreedmore » for the limiter configuration employed during the first operational campaign. At power levels of 4 MW central electron densities reached 3 × 10 19 m –3, central electron temperatures reached values of 7 keV and ion temperatures reached just above 2 keV. Important physics studies during this first operational phase include a first assessment of power balance and energy confinement, ECRH power deposition experiments, 2nd harmonic O-mode ECRH using multi-pass absorption, and current drive experiments using electron cyclotron current drive. As in many plasma discharges the electron temperature exceeds the ion temperature significantly, these plasmas are governed by core electron root confinement showing a strong positive electric field in the plasma centre.« less

Phase I/II Study of Erlotinib Combined With Cisplatin and Radiotherapy in Patients With Locally Advanced Squamous Cell Carcinoma of the Head and Neck

DOE Office of Scientific and Technical Information (OSTI.GOV)

Herchenhorn, Daniel, E-mail: herchenhorn@hotmail.co; Dias, Fernando L.; Viegas, Celia M.P.

Purpose: Erlotinib, an oral tyrosine kinase inhibitor, is active against head-and-neck squamous cell carcinoma (HNSCC) and possibly has a synergistic interaction with chemotherapy and radiotherapy. We investigated the safety and efficacy of erlotinib added to cisplatin and radiotherapy in locally advanced HNSCC. Methods and Materials: In this Phase I/II trial 100 mg/m{sup 2} of cisplatin was administered on Days 8, 29, and 50, and radiotherapy at 70 Gy was started on Day 8. During Phase I, the erlotinib dose was escalated (50 mg, 100 mg, and 150 mg) in consecutive cohorts of 3 patients, starting on Day 1 and continuingmore » during radiotherapy. Dose-limiting toxicity was defined as any Grade 4 event requiring radiotherapy interruptions. Phase II was initiated 8 weeks after the last Phase I enrollment. Results: The study accrued 9 patients in Phase I and 28 in Phase II; all were evaluable for efficacy and safety. No dose-limiting toxicity occurred in Phase I, and the recommended Phase II dose was 150 mg. The most frequent nonhematologic toxicities were nausea/vomiting, dysphagia, stomatitis, xerostomia and in-field dermatitis, acneiform rash, and diarrhea. Of the 31 patients receiving a 150-mg daily dose of erlotinib, 23 (74%; 95% confidence interval, 56.8%-86.3%) had a complete response, 3 were disease free after salvage surgery, 4 had inoperable residual disease, and 1 died of sepsis during treatment. With a median 37 months' follow-up, the 3-year progression-free and overall survival rates were 61% and 72%, respectively. Conclusions: This combination appears safe, has encouraging activity, and deserves further studies in locally advanced HNSCC.« less

Likelihood of Starting Dialysis after Incident Fistula Creation

PubMed Central

Quinn, Robert R.; Garg, Amit X.; Kim, S. Joseph; Wald, Ron; Paterson, J. Michael

2012-01-01

Summary Background and objectives Guidelines promote early fistula creation to avoid central venous catheter use. This practice may lead to fistula creations in patients who never receive dialysis. The objective of this study was to estimate the risk of fistula nonuse with long-term follow-up. Design, setting, participants, & measurements Administrative health data identified 1929 predialysis adults who had their first fistula creation between April of 2002 and March of 2006. Patients were followed for a minimum of 2 years or until they began dialysis, received a kidney transplant, or died. Results The median follow-up times in patients who started dialysis, died without receiving dialysis, and remained in predialysis were 6.1, 11.5, and 38.7 months, respectively. Eighty-one percent of patients initiated dialysis; 9% of patients died without receiving dialysis, and 10% of patients remained predialysis. Forty percent of patients had their first fistula creation 3–12 months before initiating dialysis (the recommended window). Thirty percent were created within 90 days of starting dialysis; 30% were created more than 1 year before starting dialysis, and 10% were created more than 2 years before starting dialysis. Older patients, females, and patients with less comorbidity were not as likely to initiate dialysis after incident fistula creation. Conclusions Most patients who underwent fistula creation before starting dialysis eventually received dialysis with extended follow-up, but the risk was significantly modified by age, sex, and comorbidity. Many patients had fistula creations earlier or later than recommended. PMID:22344512

Impact of conditions at start-up on thermovibrational convective flow.

PubMed

Melnikov, D E; Shevtsova, V M; Legros, J C

2008-11-01

The development of thermovibrational convection in a cubic cell filled with high Prandtl number liquid (isopropanol) is studied. Direct nonlinear simulations are performed by solving three-dimensional Navier-Stokes equations in the Boussinesq approximation. The cell is subjected to high frequency periodic oscillations perpendicular to the applied temperature gradient under zero gravity. Two types of vibrations are imposed: either as a sine or cosine function of time. It is shown that the initial vibrational phase plays a significant role in the transient behavior of thermovibrational convective flow. Such knowledge is important to interpret correctly short-duration experimental results performed in microgravity, among which the most accessible are drop towers ( approximately 5s) and parabolic flights ( approximately 20s) . It is obtained that under sine vibrations, the flow reaches steady state within less than one thermal time. Under cosine acceleration, this time is 2 times longer. For cosine excitations, the Nusselt number is approximately 10 times smaller in comparison with the sine case. Besides, in the case of cosine, the Nusselt number oscillates with double frequency. However, at the steady state, time-averaged and oscillatory characteristics of the flow are independent of the vibrational start-up. The only feature that always differs the two cases is the phase difference between the velocity, temperature, and accelerations. We have found that due to nonlinear response of the system to the imposed vibrations, the phase shift between velocity and temperature is never equal exactly to pi2 , at least in weightlessness. Thus, heat transport always exists from the beginning of vibrations, although it might be weak.

Time required to initiate outbreak and pandemic observational research.

PubMed

Rishu, Asgar H; Marinoff, Nicole; Julien, Lisa; Dumitrascu, Mariana; Marten, Nicole; Eggertson, Shauna; Willems, Su; Ruddell, Stacy; Lane, Dan; Light, Bruce; Stelfox, Henry T; Jouvet, Philippe; Hall, Richard; Reynolds, Steven; Daneman, Nick; Fowler, Robert A

2017-08-01

Observational research focused upon emerging infectious diseases such as Ebola virus, Middle East respiratory syndrome, and Zika virus has been challenging to quickly initiate. We aimed to determine the duration of start-up procedures and barriers encountered for an observational study focused upon such infectious outbreaks. At 1 pediatric and 5 adult intensive care units, we measured durations from protocol receipt to a variety of outbreak research milestones, including research ethics board (REB) approval, data sharing agreement (DSA) execution, and patient study screening initiation. The median (interquartile range) time from site receipt of the protocol to REB submission was 73 (30-126) days; to REB approval, 158 (42-188) days; to DSA completion, 276 (186-312) days; and to study screening initiation, 293 (269-391) days. The median time from REB submission to REB approval was 43 (13-85) days. The median time for all start-up procedures was 335 (188-335) days. There is a lengthy start-up period required for outbreak-focused research. Completing DSAs was the most time-consuming step. A reactive approach to newly emerging threats such as Ebola virus, Middle East respiratory syndrome, and Zika virus will likely not allow sufficient time to initiate research before most outbreaks are advanced. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Start-Up Rhetoric in Eight Speeches of Barack Obama

ERIC Educational Resources Information Center

O'Connell, Daniel C.; Kowal, Sabine; Sabin, Edward J.; Lamia, John F.; Dannevik, Margaret

2010-01-01

Our purpose in the following was to investigate the start-up rhetoric employed by U.S. President Barack Obama in his speeches. The initial 5 min from eight of his speeches from May to September of 2009 were selected for their variety of setting, audience, theme, and purpose. It was generally hypothesized that Barack Obama, widely recognized for…

Improved Timing Scheme for Spaceborne Precipitation Radar

NASA Technical Reports Server (NTRS)

Berkun, Andrew; Fischman, Mark

2004-01-01

An improved timing scheme has been conceived for operation of a scanning satellite-borne rain-measuring radar system. The scheme allows a real-time-generated solution, which is required for auto targeting. The current timing scheme used in radar satellites involves pre-computing a solution that allows the instrument to catch all transmitted pulses without transmitting and receiving at the same time. Satellite altitude requires many pulses in flight at any time, and the timing solution to prevent transmit and receive operations from colliding is usually found iteratively. The proposed satellite has a large number of scanning beams each with a different range to target and few pulses per beam. Furthermore, the satellite will be self-targeting, so the selection of which beams are used will change from sweep to sweep. The proposed timing solution guarantees no echo collisions, can be generated using simple FPGA-based hardware in real time, and can be mathematically shown to deliver the maximum number of pulses per second, given the timing constraints. The timing solution is computed every sweep, and consists of three phases: (1) a build-up phase, (2) a feedback phase, and (3) a build-down phase. Before the build-up phase can begin, the beams to be transmitted are sorted in numerical order. The numerical order of the beams is also the order from shortest range to longest range. Sorting the list guarantees no pulse collisions. The build-up phase begins by transmitting the first pulse from the first beam on the list. Transmission of this pulse starts a delay counter, which stores the beam number and the time delay to the beginning of the receive window for that beam. The timing generator waits just long enough to complete the transmit pulse plus one receive window, then sends out the second pulse. The second pulse starts a second delay counter, which stores its beam number and time delay. This process continues until an output from the first timer indicates there is less than one transmit pulse width until the start of the next receive event. This blocks future transmit pulses in the build-up phase. The feedback phase begins with the first timer paying off and starting the first receive window. When the first receive window is complete, the timing generator transmits the next beam from the list. When the second timer pays off, the second receive event is started. Following the second receive event, the timing generator will transmit the next beam on the list and start an additional timer. The timers work in a circular buffer fashion so there only need to be enough to cover the maximum number of echoes in flight.

The start-up phase of the national satellite forest monitoring systems for DRC and PNG: a joint venture between FAO and INPE

NASA Astrophysics Data System (ADS)

Jonckheere, I. G.; FAO UN-REDD Team Forestry Department

2011-12-01

Reducing Emissions from Deforestation and Forest Degradation (REDD) is an effort to create a financial value for the carbon stored in forests, offering incentives for developing countries to reduce emissions from forested lands and invest in low-carbon paths to sustainable development. "REDD+" goes beyond deforestation and forest degradation, and includes the role of conservation, sustainable management of forests and enhancement of forest carbon stocks. In the framework of getting countries ready for REDD+, the UN-REDD Programme, a partnership between UNEP, FAO and UNDP, assists developing countries to prepare and implement national REDD+ strategies. Designed collaboratively by a broad range of stakeholders, national UN-REDD Programmes are informed by the technical expertise of FAO, UNDP and UNEP. For the monitoring, reporting and verification, FAO supports the countries to develop satellite forest monitoring systems that allow for credible measurement, reporting and verification (MRV)of REDD+ activities. These are among the most critical elements for the successful implementation of any REDD+ mechanism, also following the COP 16 decisions in Cancun last year. The UN-REDD Programme through a joint effort of FAO and Brazil's National Space Agency, INPE, is supporting countries to develop cost-effective, robust and compatible national monitoring and MRV systems, providing tools, methodologies, training and knowledge sharing that help countries to strengthen their technical and institutional capacity for effective MRV systems. To develop strong nationally-owned forest monitoring systems, technical and institutional capacity building is key. The UN-REDD Programme, through FAO, has taken on intensive training together with INPE, and has provided technical help and assistance for in-country training and implementation for national satellite forest monitoring. The goal of the start-up phase for DRC and Papua New Guinea (PNG) in this capacity building effort is the training of technical forest people and IT persons from these two interested REDD+ countries, and to set-up the national satellite forest monitoring systems. The Brazilian forest monitoring system, TerraAmazon, which is used as a basis for this initiative, allows countries to adapt it to country needs and the training on the TerraAmazon system is a tool to enhance existing capacity on carbon monitoring systems. The start-up phase of the National Forest Monitoring System for DRC and PNG will allow these countries to follow all actions related to the implementation of its national REDD+ policies and measures. The monitoring system will work as a platform to obtain information on their REDD+ results and actions, related directly or indirectly to national REDD+ strategies and may also include actions unrelated to carbon assessment, such as forest law enforcement. With the technical assistance of FAO, INPE and other stakeholders, the countries will set up an autonomous operational forest monitoring system. An initial version and the methodologies of these syste,s will be launched in Durban, South Africa during COP 17 and is presented here.

Physicochemical characteristics and microbial community evolution of biofilms during the start-up period in a moving bed biofilm reactor.

PubMed

Zhu, Yan; Zhang, Yan; Ren, Hong-Qiang; Geng, Jin-Ju; Xu, Ke; Huang, Hui; Ding, Li-Li

2015-03-01

This study aimed to investigate biofilm properties evolution coupled with different ages during the start-up period in a moving bed biofilm reactor system. Physicochemical characteristics including adhesion force, extracellular polymeric substances (EPS), morphology as well as volatile solid and microbial community were studied. Results showed that the formation and development of biofilms exhibited four stages, including (I) initial attachment and young biofilm formation, (II) biofilms accumulation, (III) biofilm sloughing and updating, and (IV) biofilm maturation. During the whole start-up period, adhesion force was positively and significantly correlated with the contents of EPS, especially the content of polysaccharide. In addition, increased adhesion force and EPS were beneficial for biofilm retention. Gram-negative bacteria mainly including Sphaerotilus, Zoogloea and Haliscomenobacter were predominant in the initial stage. Actinobacteria was beneficial to resist sloughing. Furthermore, filamentous bacteria were dominant in maturation biofilm. Copyright © 2015 Elsevier Ltd. All rights reserved.

SuperJet International case study: a business network start-up in the aeronautics industry

NASA Astrophysics Data System (ADS)

Corallo, Angelo; de Maggio, Marco; Storelli, Davide

This chapter presents the SuperJet International case study, a start-up in the aeronautics industry characterized by a process-oriented approach and a complex and as yet evolving network of partnerships and collaborations. The chapter aims to describe the key points of the start-up process, highlighting common factors and differences compared to the TEKNE Methodology of Change, with particular reference to the second and third phase, namely, the design and deployment of new techno-organizational systems. The SuperJet International startup is presented as a case study where strategic and organizational aspects have been jointly conceived from a network-driven perspective. The chapter compares some of the guidelines of the TEKNE Methodology of Change with experiences and actual practices deriving from interviews with key players in SJI's start-up process.

Long-term renal outcome in patients with malignant hypertension: a retrospective cohort study

PubMed Central

2012-01-01

Background Malignant hypertension is frequently complicated by renal insufficiency. Although the survival of this hypertensive emergency has improved, recent data on renal outcome and its predictors are lacking. We assessed renal outcome and its predictors in patients with malignant hypertension. Methods Retrospective analysis of patients admitted with malignant hypertension in Amsterdam, the Netherlands between August 1992–January 2010. Follow-up data on vital status, renal function and blood pressure (BP) were obtained from the outpatient department and from general practitioners. The primary composite endpoint was end-stage renal disease (ESRD) defined as the start of kidney replacement therapy (KRT) or ≥ 50% decline of estimated glomerular filtration rate (eGFR). The secondary endpoint was all cause mortality. Results A total of 120 patients admitted with malignant hypertension were included. After a median follow-up period of 67 months (IQR 28 to 108 months) the primary endpoint was reached by 37 (31%) patients, whereas 18 patients (15%) reached the secondary endpoint. Twenty-nine (24%) patients started KRT and 8 patients (7%) had an eGFR decline ≥ 50%. After the acute phase (> 3 months after admission), initial serum creatinine and follow-up BP were the main predictors of future ESRD with hazard ratios of 6.1 (95% CI, 2.2–17) for patients with initial serum creatinine ≥ 175 μmol /L and 4.3 (95% CI, 1.4–14) for patients with uncontrolled hypertension. Conclusions Progressive renal function decline leading to ESRD remains a major threat to patients with malignant hypertension. BP control during follow-up was an important modifiable predictor of renal outcome. PMID:22846257

Solid and liquid Equation of state for initially porous aluminum where specific heat is constant

NASA Astrophysics Data System (ADS)

Forbes, Jerry W.; Lemar, E. R.; Brown, Mary

2011-06-01

A porous solid's initial state is off the thermodynamic surface of the non-porous solid to start with but when pressure is high enough to cause total pore collapse or crush up, then the final states are on the condensed matter thermodynamic surfaces. The Hugoniot for the fully compacted solid is above the Principle Hugoniot with pressure, temperature and internal energy increased at a given v. There are a number of ways to define this hotter Hugoniot, which can be referenced to other thermodynamic paths on this thermodynamic surface. The choice here was to use the Vinet isotherm to define a consistent thermodynamic surface for the solid and melt phase of 6061 aluminum where specific heat is constant for the P-v-T space of interest. Analytical equations are developed for PH and TH.

The Commtech Methodology: A Demand-Driven Approach to Efficient, Productive, and Measurable Technology Transfer and Commercialization

NASA Technical Reports Server (NTRS)

Horsham, Gary A. P.

1999-01-01

This paper presents a comprehensive review and assessment of a demonstration technology transfer and commercialization prouram called "CommTech". The pro-ram was conceived and initiated in early to mid-fiscal year 1995, and extended roughly three years into the future. Market research sources were used to initially gather primary technological problems and needs data from non-aerospace companies in three targeted industry sectors: environmental, surface transportation, and bioengineering. Company-supplied information served as input data to activate or start-up an internal, phased matchmaking process. This process was based on technical-level relationship exploration followed by business-level agreement negotiations. and culminated with project management and execution. Space Act Agreements represented near-term outputs. Company product or process commercialization derived from NASA Glenn support and measurable economic effects represented far-term outputs.

An Abridged History of Medical Informatics Education in Europe

PubMed Central

Hasman, Arie; Mantas, John; Zarubina, Tatyana

2014-01-01

This contribution presents the development of medical informatics education in Europe. It does not discuss all developments that took place. Rather it discerns several themes that indicate the progress in the field, starting from the initiation phase to the final quality control phase. PMID:24648617

40 CFR 63.7130 - What notifications must I submit and when?

Code of Federal Regulations, 2010 CFR

2010-07-01

...) through (j) that apply to you, by the dates specified. (b) As specified in § 63.9(b)(2), if you start up... you start up your affected source. (d) If you are required to conduct a performance test, you must... before the close of business on the 30th calendar day following the completion of the initial compliance...

40 CFR 63.8480 - What notifications must I submit and when?

Code of Federal Regulations, 2010 CFR

2010-07-01

... start up your affected source before May 16, 2003, you must submit an Initial Notification not later than 120 calendar days after May 16, 2003. (c) As specified in § 63.9(b)(3), if you start up your new... Status, including the performance test results, before the close of business on the 60th calendar day...

40 CFR 63.9640 - What notifications must I submit and when?

Code of Federal Regulations, 2010 CFR

2010-07-01

... the specified dates. (b) As specified in § 63.9(b)(2), if you start up your affected source before... 30, 2003. (c) As specified in § 63.9(b)(3), if you start up your new affected source on or after... close of business on the 30th calendar day following completion of the initial compliance demonstration...

40 CFR 63.8692 - What notifications must I submit and when?

Code of Federal Regulations, 2010 CFR

2010-07-01

... start up your affected source before April 29, 2003, you must submit an Initial Notification not later than 120 calendar days after April 29, 2003. (c) As specified in § 63.9(b)(3), if you start up your new... close of business on the 60th calendar day following the completion of the performance test according to...

Long-Term Persistence with Injectable Therapy in Relapsing-Remitting Multiple Sclerosis: An 18-Year Observational Cohort Study

PubMed Central

Zhornitsky, Simon; Greenfield, Jamie; Koch, Marcus W.; Patten, Scott B.; Harris, Colleen; Wall, Winona; Alikhani, Katayoun; Burton, Jodie; Busche, Kevin; Costello, Fiona; Davenport, Jeptha W.; Jarvis, Scott E.; Lavarato, Dina; Parpal, Helene; Patry, David G.; Yeung, Michael; Metz, Luanne M.

2015-01-01

Disease modifying therapies (DMTs) reduce the frequency of relapses and accumulation of disability in multiple sclerosis (MS). Long-term persistence with treatment is important to optimize treatment benefit. This long-term, cohort study was conducted at the Calgary MS Clinic. All consenting adults with relapsing-remitting MS who started either glatiramer acetate (GA) or interferon-β 1a/1b (IFN-β) between January 1st, 1996 and July 1st, 2011 were included. Follow-up continued to February 1st, 2014. Time-to-discontinuation of the initial and subsequently-prescribed DMTs (switches) was analysed using Kaplan-Meier survival analyses. Group differences were compared using log-rank tests and multivariable Cox regression models. Analysis included 1471 participants; 906 were initially prescribed GA and 565 were initially prescribed IFN-β. Follow-up information was available for 87%; 29 (2%) were lost to follow-up and 160 (11%) moved from Southern Alberta while still using DMT. Median time-to-discontinuation of all injectable DMTs was 11.1 years. Participants with greater disability at treatment initiation, those who started treatment before age 30, and those who started between 2006 and 2011 were more likely to discontinue use of all injectable DMTs. Median time-to-discontinuation of the initial DMT was 8.6 years. Those initially prescribed GA remained on treatment longer. Of 610 participants who discontinued injectable DMT, 331 (54%) started an oral DMT, or a second-line DMT, or resumed injectable DMT after 90 days. Persistence with injectable DMTs was high in this long-term population-based study. Most participants who discontinued injectable DMT did not remain untreated. Further research is required to understand treatment outcomes and outcomes after stopping DMT. PMID:25867095

[Outsourcing in long-term care: a risk management approach].

PubMed

Guimarães, Cristina Machado; Carvalho, José Crespo de

2012-05-01

This article seeks to investigate outsourcing decisions in supply chain management of healthcare organizations, namely the motives and constraints behind the decision, the selection criteria for activities to be outsourced to third parties, the type of possible agreements, and the impact of this decision on the organization per se. A case study of the start-up phase of a Long-term Care unit with an innovative approach and high levels of customization was conducted to understand the outsourcing process in a start-up context (not in the standard context of organizational change) and a risk evaluation matrix was created for outsourcing activities in order to define and implement a performance monitoring process. This study seeks to understand how to evaluate and assess the risks of an outsourcing strategy and proposes a monitoring model using risk management tools. It was shown that the risk management approach can be a solution for monitoring outsourcing in the organizational start-up phase. Conclusions concerning dissatisfaction with the results of outsourcing strategies adopted are also presented.

Three-dimensionality development inside standard parallelepipedic lid-driven cavities at /Re=1000

NASA Astrophysics Data System (ADS)

Migeon, C.; Pineau, G.; Texier, A.

2003-04-01

This paper considers the problem of the time-dependent laminar incompressible flow motion within parallelepipedic cavities in which one wall moves with uniform velocity after an impulsive start using a particle-streak and a dye-emission techniques. Of particular concern is the examination of the spanwise structures of the flow in view to point out how three-dimensionality arises and develops with time for a Reynolds number of 1000. For this purpose, attention is focused on the spanwise currents, the end-wall corner vortices and the structures resulting from the centrifugal instability. Among others, the study clearly shows the scenario of propagation of the spanwise currents by giving quantitative information on their velocity and on the time from which a given cross-plane becomes affected by such a 3-D perturbation. Furthermore, the numerous visualizations reveal the existence of only one corner-vortex on each end-wall; this vortex is quasi-toroidal shaped. Finally, concerning flow instability, the present results show that no well-formed counter-rotating vortices emerge for /Re=1000 during the start-up phase contrary to what was asserted so far. However, two successive initial phases of this instability development are revealed for the first time.

Self-consistent analysis of radiation and relativistic electron beam dynamics in a helical wiggler using Lienard-Wiechert fields

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tecimer, M.; Elias, L.R.

1995-12-31

Lienard-Wiechert (LW) fields, which are exact solutions of the Wave Equation for a point charge in free space, are employed to formulate a self-consistent treatment of the electron beam dynamics and the evolution of the generated radiation in long undulators. In a relativistic electron beam the internal forces leading to the interaction of the electrons with each other can be computed by means of retarded LW fields. The resulting electron beam dynamics enables us to obtain three dimensional radiation fields starting from an initial incoherent spontaneous emission, without introducing a seed wave at start-up. Based on the formalism employed here,more » both the evolution of the multi-bucket electron phase space dynamics in the beam body as well as edges and the relative slippage of the radiation with respect to the electrons in the considered short bunch are naturally embedded into the simulation model. In this paper, we present electromagnetic radiation studies, including multi-bucket electron phase dynamics and angular distribution of radiation in the time and frequency domain produced by a relativistic short electron beam bunch interacting with a circularly polarized magnetic undulator.« less

The impact of new insights and revised practice guidelines on prescribing drugs in the treatment of Type 2 diabetes mellitus

PubMed Central

Lub, René; Denig, Petra; van den Berg, Paul B; Hoogenberg, Klaas; de Jong-van den Berg, Lolkje T W

2006-01-01

Aims The aim of this study was to investigate the impact of new insights and revised guidelines on initial and follow-up treatment with antihyperglycaemic drugs over the period 1998–2003. Methods The InterAction Database (IADB), which contains pharmacy dispensing data from 53 community pharmacies in the Northern and Eastern part of the Netherlands, was used in this study. Prevalence and incidence rates of oral antihyperglycaemic drug use were calculated for each year. Follow-up treatment was compared for two cohorts of initial users of oral antihyperglycaemic drugs, starting treatment either 1 year before or 1 year after guideline revision. Results The prevalence and incidence rate of oral antihyperglycaemic drug use increased over the study period from 1.8% to 2.4% (P < 0.001) and 0.3% to 0.4% (P= 0.04). The proportion of metformin as initial treatment increased rapidly in the observation period from 14% to 50% (P < 0.001). Initial users of metformin in 2000 received additional treatment with a sulphonylurea in the follow-up period less often compared with those who started metformin in 1998 (46%vs. 60%, P < 0.004). In contrast, initial users of sulphonylurea in 2000 received additional treatment with metformin more often compared with those who started a sulphonylurea in 1998 (42%vs. 36%, P < 0.008). The new drugs, thiazolidinediones and meglitinides, were seldom used as initial treatment Conclusions New insights and the revision of the practice guideline were followed by a significant increase in both initial and follow-up treatment with metformin among patients with Type 2 diabetes mellitus. PMID:16796700

Diminishing availability of publicly funded slots for antiretroviral initiation among HIV-infected ART-eligible patients in Uganda.

PubMed

Geng, Elvin H; Bwana, Mwebesa B; Kabakyenga, Jerome; Muyindike, Winnie; Emenyonu, Nneka I; Musinguzi, Nicholas; Mugyenyi, Peter; Martin, Jeffrey N; Bangsberg, David R

2010-11-24

The impact of flat-line funding in the global scale up of antiretroviral therapy (ART) for HIV-infected patients in Africa has not yet been well described. We evaluated ART-eligible patients and patients starting ART at a prototypical scale up ART clinic in Mbarara, Uganda between April 1, 2009 and May 14, 2010 where four stakeholders sponsor treatment - two PEPFAR implementing organizations, the Ugandan Ministry of Health - Global Fund (MOH-GF) and a private foundation named the Family Treatment Fund (FTF). We assessed temporal trends in the number of eligible patients, the number starting ART and tabulated the distribution of the stakeholders supporting ART initiation by month and quartile of time during this interval. We used survival analyses to assess changes in the rate of ART initiation over calendar time. A total of 1309 patients who were eligible for ART made visits over the 14 month period of the study and of these 819 started ART. The median number of ART eligible patients each month was 88 (IQR: 74 to 115). By quartile of calendar time, PEPFAR and MOH sponsored 290, 192, 180, and 49 ART initiations whereas the FTF started 1, 2, 1 and 104 patients respectively. By May of 2010 (the last calendar month of observation) FTF sponsored 88% of all ART initiations. Becoming eligible for ART in the 3(rd) (HR = 0.58, 95% 0.45-0.74) and 4(th) quartiles (HR = 0.49, 95% CI: 0.36-0.65) was associated with delay in ART initiation compared to the first quartile in multivariable analyses. During a period of flat line funding from multinational donors for ART programs, reductions in the number of ART initiations by public programs (i.e., PEPFAR and MOH-GF) and delays in ART initiation became apparent at the a large prototypical scale-up ART clinic in Uganda.

Indigenous microbial capability in solid manure residues to start-up solid-phase anaerobic digesters.

PubMed

Yap, S D; Astals, S; Jensen, P D; Batstone, D J; Tait, S

2017-06-01

Batch solid-phase anaerobic digestion is a technology for sustainable on-farm treatment of solid residues, but is an emerging technology that is yet to be optimised with respect to start-up and inoculation. In the present study, spent bedding from two piggeries (site A and B) were batch digested at total solids (TS) concentration of 5, 10 and 20% at mesophilic (37°C) and thermophilic (55°C) temperatures, without adding an external inoculum. The results showed that the indigenous microbial community present in spent bedding was able to recover the full methane potential of the bedding (140±5 and 227±6L CH 4 kgVS fed -1 for site A and B, respectively), but longer treatment times were required than for digestion with an added external inoculum. Nonetheless, at high solid loadings (i.e. TS level>10%), the digestion performance was affected by chemical inhibition due to ammonia and/or humic acid. Thermophilic temperatures did not influence digestion performance but did increase start-up failure risk. Further, inoculation of residues from the batch digestion to subsequent batch enhanced start-up and achieved full methane potential recovery of the bedding. Inoculation with liquid residue (leachate) was preferred over a solid residue, to preserve treatment capacity for fresh substrate. Overall, the study highlighted that indigenous microbial community in the solid manure residue was capable of recovering full methane potential and that solid-phase digestion was ultimately limited by chemical inhibition rather than lack of suitable microbial community. Copyright © 2017 Elsevier Ltd. All rights reserved.

Confirming the timing of phase-based costing in oncology studies: a case example in advanced melanoma.

PubMed

Atkins, Michael; Coutinho, Anna D; Nunna, Sasikiran; Gupte-Singh, Komal; Eaddy, Michael

2018-02-01

The utilization of healthcare services and costs among patients with cancer is often estimated by the phase of care: initial, interim, or terminal. Although their durations are often set arbitrarily, we sought to establish data-driven phases of care using joinpoint regression in an advanced melanoma population as a case example. A retrospective claims database study was conducted to assess the costs of advanced melanoma from distant metastasis diagnosis to death during January 2010-September 2014. Joinpoint regression analysis was applied to identify the best-fitting points, where statistically significant changes in the trend of average monthly costs occurred. To identify the initial phase, average monthly costs were modeled from metastasis diagnosis to death; and were modeled backward from death to metastasis diagnosis for the terminal phase. Points of monthly cost trend inflection denoted ending and starting points. The months between represented the interim phase. A total of 1,671 patients with advanced melanoma who died met the eligibility criteria. Initial phase was identified as the 5-month period starting with diagnosis of metastasis, after which there was a sharp, significant decline in monthly cost trend (monthly percent change [MPC] = -13.0%; 95% CI = -16.9% to -8.8%). Terminal phase was defined as the 5-month period before death (MPC = -14.0%; 95% CI = -17.6% to -10.2%). The claims-based algorithm may under-estimate patients due to misclassifications, and may over-estimate terminal phase costs because hospital and emergency visits were used as a death proxy. Also, recently approved therapies were not included, which may under-estimate advanced melanoma costs. In this advanced melanoma population, optimal duration of the initial and terminal phases of care was 5 months immediately after diagnosis of metastasis and before death, respectively. Joinpoint regression can be used to provide data-supported phase of cancer care durations, but should be combined with clinical judgement.

Flow control by means of a traveling curvature wave in fishlike escape responses

NASA Astrophysics Data System (ADS)

Liu, Geng; Yu, Yong-Liang; Tong, Bing-Gang

2011-11-01

Fish usually bend their bodies into a ‘‘C’’ shape and then beat their tails one or more times to escape from predators (in nature) or stimuli (in experiments). The maneuvering behavior, i.e., the C-shape bending and the return flapping, is called C-start. In this paper, the escaping performance of fishlike C-start motions has been numerically investigated for a flow physics study by the use of a two-dimensional deformable foil bending and stretching quickly. The C-start motions, performed in the quiescent water and based on prescribed deforming modes, are predicted by a numerical method coupling the two-dimensional incompressible Navier-Stokes equations and the deforming body dynamic equations. It has been found earlier that a typical C-start motion consists of (1) a main C-shape bending and (2) a rearward travelling curvature wave which was seldom mentioned in previous studies. In order to reveal the flow control mechanism of the traveling curvature wave in a fish's C-start motion, two kinds of C-start flows with different deforming modes, namely the integrated mode (IM, a C-shape bending plus a travelling curvature wave) and the basic mode (BM, a C-shape bending only) are analyzed and compared in detail. According to the numerical results, it shows that if proper values of the travelling curvature wave parameters are chosen, the foil's escaping maneuverability presented in the IM is much better than that in the BM, i.e. the turn angle and the speed of the center of mass at the end of a C-start in the IM is almost twice as large as those in the BM. Further study shows that the travelling curvature wave not only can enhance the thrust and the centripetal force but also increase the propulsive efficiency. These results suggest that an efficient travelling curvature wave is of great significance in the flow control of a C-start motion. Finally, a parametric study finds that the phase difference between the C-shape bending and the travelling curvature wave (i.e., the initial phase angle in the travelling curvature wave of the deforming model) is a key parameter in the flow control. To achieve the desirable turn angle, escaping speed, and propulsive efficiency in the C-start motions, the initial phase angles must be ranged within specific magnitudes. It is found that for optimum values of the initial phase angle, the foil's flexible deforming process is qualitatively consistent with that of a fish body in nature. The results obtained in this study provide a new physical insight into the understanding of swimming mechanisms of fish's C-start maneuvers.

Flow control by means of a traveling curvature wave in fishlike escape responses.

PubMed

Liu, Geng; Yu, Yong-Liang; Tong, Bing-Gang

2011-11-01

Fish usually bend their bodies into a ''C'' shape and then beat their tails one or more times to escape from predators (in nature) or stimuli (in experiments). The maneuvering behavior, i.e., the C-shape bending and the return flapping, is called C-start. In this paper, the escaping performance of fishlike C-start motions has been numerically investigated for a flow physics study by the use of a two-dimensional deformable foil bending and stretching quickly. The C-start motions, performed in the quiescent water and based on prescribed deforming modes, are predicted by a numerical method coupling the two-dimensional incompressible Navier-Stokes equations and the deforming body dynamic equations. It has been found earlier that a typical C-start motion consists of (1) a main C-shape bending and (2) a rearward travelling curvature wave which was seldom mentioned in previous studies. In order to reveal the flow control mechanism of the traveling curvature wave in a fish's C-start motion, two kinds of C-start flows with different deforming modes, namely the integrated mode (IM, a C-shape bending plus a travelling curvature wave) and the basic mode (BM, a C-shape bending only) are analyzed and compared in detail. According to the numerical results, it shows that if proper values of the travelling curvature wave parameters are chosen, the foil's escaping maneuverability presented in the IM is much better than that in the BM, i.e. the turn angle and the speed of the center of mass at the end of a C-start in the IM is almost twice as large as those in the BM. Further study shows that the travelling curvature wave not only can enhance the thrust and the centripetal force but also increase the propulsive efficiency. These results suggest that an efficient travelling curvature wave is of great significance in the flow control of a C-start motion. Finally, a parametric study finds that the phase difference between the C-shape bending and the travelling curvature wave (i.e., the initial phase angle in the travelling curvature wave of the deforming model) is a key parameter in the flow control. To achieve the desirable turn angle, escaping speed, and propulsive efficiency in the C-start motions, the initial phase angles must be ranged within specific magnitudes. It is found that for optimum values of the initial phase angle, the foil's flexible deforming process is qualitatively consistent with that of a fish body in nature. The results obtained in this study provide a new physical insight into the understanding of swimming mechanisms of fish's C-start maneuvers.

Challenges and Opportunities in Establishing and Maintaining Newborn Screening in a Rural Area of Andhra Pradesh - Task Force Study by Indian Council of Medical Research.

PubMed

Radha Rama Devi, A; Ananthalakshmi, Y; Srimannarayana Rao, K

2018-02-19

The primary objective was to evaluate the feasibility of setting up newborn screening in rural areas in India. Secondary objective was to enhance the knowledge and awareness towards early detection of diseases by newborn screening, management of the affected baby and to impart genetic counseling. Awareness programs were conducted at different mandals in the district for the medical practioners during the preparatory phase of the Task Force Project. Educative lectures and clinical meetings regarding the importance and relevance of newborn screening were held every 3 months initially and half yearly later. Families were counselled during antenatal check-ups. Good co-operation was obtained from medical doctors and their willingness to participate in sample collection from the hospitals. Families accepted screening after an initial period of resistance. The fact that screening of this kind will help their babies made a positive impact. Many families started promoting newborn screening to their friends and relations. Confirmation of diagnosis, treatment, and follow-up were satisfactory with almost negligible number of cases lost to follow-up. With proper planning and commitment on the part of health authorities, it is possible to implement newborn screening in rural areas in India as well.

A novel transient wall heat transfer approach for the start-up of SI engines with gasoline direct injection

NASA Astrophysics Data System (ADS)

Lejsek, David; Kulzer, André; Hammer, Jürgen

2010-11-01

The introduction of CO2-reduction technologies like Start-Stop or the Hybrid-Powertrain and the worldwide stringent emission legislation require a detailed optimization of the engine start-up. The combustion concept development as well as the calibration of the engine control unit makes an explicit thermodynamic analysis of the combustion process during the start-up necessary. Initially, the well-known thermodynamic analysis of in-cylinder pressure at stationary condition was transmitted to the highly non-stationary engine start-up. For this running mode of the engine the current models for calculation of the transient wall heat fluxes were found to be misleading. With a fraction of nearly 45% of the burned fuel energy, the wall heat is very important for the calculation of energy balance and for the combustion process analysis. Based on the measurements of transient wall heat transfer densities during the start-up presented in a former work (Lejsek and Kulzer in Investigations on the transient wall heat transfer at start-up for SI engines with gasoline direct injection. SAE Paper), the paper describes the development of adaptations to the known correlations by Woschni (MTZ 31:491, 1970), Hohenberg (Experimentelle Erfassung der Wandwärme von Kolbenmotoren. TU Graz, Habil., 1980) and Bargende (Ein Gleichungsansatz zur Berechnung der instationären Wandwärmeverluste im Hochdruckteil von Ottomotoren. TH Darmstadt, PhD-Thesis, 1991) for the application during engine start-up. To demonstrate the high accuracy of the model, the results of the cyclic resolved thermodynamic analysis using the presented novel approaches were compared with the results of the measurements. It is shown, that the novel heat flux models for the engine start-up process gives a cyclic resolved thermodynamic analysis to optimize the engine start-up pretty efficient.

Transport and degradation of metalaxyl and isoproturon in biopurification columns inoculated with pesticide-primed material.

PubMed

De Wilde, Tineke; Spanoghe, Pieter; Sniegowksi, Kristel; Ryckeboer, Jaak; Jaeken, Peter; Springael, Dirk

2010-01-01

Laboratory column displacement experiments were performed to examine whether addition of pesticide-primed material to the matrix of an on-farm biopurification system (BPS), intended to remove pesticides from agricultural waste water, positively affects the degradation of mobile pesticides in the system. Percolated column microcosms with varying types and amounts of metalaxyl and/or isoproturon-primed material or non-primed material were irrigated with water artificially contaminated with isoproturon and/or metalaxyl. Transport of isoproturon was well described using the convection dispersion equation and no dissipation was observed, even in columns inoculated with isoproturon-primed material. On the other hand, delayed dissipation of metalaxyl, i.e., after an initial lag phase, was encountered in all columns receiving metalaxyl. In all systems, dissipation could be described using the Monod model indicating that a metalaxyl degrading population grew in the systems. There was a clear correlation between the lag phase and the amount of metalaxyl-primed material added to the system, i.e., increasing amounts of added material resulted into shorter lag phases and hence more rapid initiation of growth-associated metalaxyl degradation in the system. Our observations suggest that indeed pesticide-primed material can reduce the start-up phase of degradation of mobile pesticides in a BPS and as such can increase its efficiency. However, the primed material should be chosen carefully and preferentially beforehand tested for its capacity to degrade the pesticide.

Human Research Initiative (HRI)

NASA Technical Reports Server (NTRS)

Motil, Brian

2003-01-01

A code U initiative starting in the FY04 budget includes specific funding for 'Phase Change' and 'Multiphase Flow Research' on the ISS. NASA GRC developed a concept for two facilities based on funding/schedule constraints: 1) Two Phase Flow Facility (TphiFFy) which assumes integrating into FIR; 2) Contact Line Dynamics Experiment Facility (CLiDE) which assumes integration into MSG. Each facility will accommodate multiple experiments conducted by NRA selected PIs with an overall goal of enabling specific NASA strategic objectives. There may also be a significant ground-based component.

Does initial dosing of levothyroxine in infants with congenital hypothyroidism lead to frequent dose adjustments secondary to iatrogenic hyperthyroidism on follow-up?

PubMed

Craven, Meghan; Frank, Graeme R

2018-06-27

Congenital hypothyroidism (CH) is the most common preventable cause of intellectual disability. The recommended starting dose of levothyroxine (LT4) is between 10 and 15 μg/kg, an extremely wide range. We hypothesized that a sizable proportion of newborns treated for CH at the higher end of the dosage range become biochemically hyperthyroid at a follow-up visit. This study is a retrospective chart review of infants with CH between 2002 and 2012. Of the 104 patients included in this analysis, the average age at diagnosis was 11 days and the average starting dose of LT4 was 12±2.5 μg/kg. At follow-up, 36.5% required a dose reduction because of iatrogenic hyperthyroxinemia, 51% required no dose adjustment and 12.5% required a dose increase due to an elevated thyroid stimulating hormone (TSH). The starting doses of LT4 for those requiring a dose reduction, those not requiring an adjustment and those requiring an increase in the dose were 13.2±2.4, 11.5±2.1 and 10.3±2.6 μg/kg/day, respectively (p≤0.0001). Of the 34% of infants treated with an initial dose of >12.5 μg/day, 57.1% required a dose reduction at follow-up, compared to 26.1% of those whose initial starting dose was ≤12.5 μg/kg/day (p=0.007). Following the guidelines for initiating therapy for CH, 36.5% of the infants required a dose reduction for iatrogenic hyperthyroxinemia. These infants received a higher dose of LT4 than the infants who either required no adjustment or required an increase in the dose. A narrower range for initial dosing in CH may be appropriate.

Fear of falling is associated with prolonged anticipatory postural adjustment during gait initiation under dual-task conditions in older adults.

PubMed

Uemura, Kazuki; Yamada, Minoru; Nagai, Koutatsu; Tanaka, Buichi; Mori, Shuhei; Ichihashi, Noriaki

2012-02-01

Little is known about dynamic balance control under dual-task conditions in older adults with fear of falling (FoF). The purpose of this study was to examine the effect of FoF on anticipatory postural adjustment (APA) during gait initiation under dual-task conditions in older adults. Fifty-seven elderly volunteers (age, 79.2 [6.8] years) from the community participated in this study. Each participant was categorised into either the Fear (n=24) or No-fear (n=33) group on the basis of the presence or absence of FoF. Under single- and dual-task conditions, centre of pressure (COP) data were collected while the participants performed gait initiation trials from a starting position on a force platform. We also performed a 10-m walking test (WT), a timed up & go test (TUG), and a functional reach test (FR). The reaction and APA phases were measured from the COP data. The results showed that under the dual-task condition, the Fear group had significantly longer APA phases than the No-fear group, although no significant differences were observed between the 2 groups in the reaction and APA phases under the single-task condition and in any clinical measurements (WT, TUG, and FR). Our findings suggest that specific deficits in balance control occur in subjects with FoF during gait initiation while dual tasking, even if their physical functions are comparable to subjects without FoF. Copyright © 2011 Elsevier B.V. All rights reserved.

Start-up of an anaerobic fluidized bed reactor treating synthetic carbohydrate rich wastewater.

PubMed

Yeshanew, Martha M; Frunzo, Luigi; Luongo, Vincenzo; Pirozzi, Francesco; Lens, Piet N L; Esposito, Giovanni

2016-12-15

The present work studied the start-up process of a mesophilic (37 ± 2 °C) anaerobic fluidized bed reactor (AFBR) operated at a hydraulic retention time (HRT) of 20 days using synthetic carbohydrate rich wastewater. Anox Kaldness-K1 carriers were used as biofilm carrier material. The reactor performance and biofilm formation were evaluated during the process. The start-up process at lower liquid recirculation flow rate enhanced the biofilm formation and reactor performance. The organic substrate composition had a major impact on early colonization of methanogenic archaea onto the surface of the Kaldness carriers during the start-up process. Specific organic substrates favouring the growth of methanogenic archaea, such as acetate, are preferred in order to facilitate the subsequent biofilm formation and AFBR start-up. The supply of 'bio-available' nutrients and trace elements, in particular iron, had an important role on optimal methanogenic activity and speeding-up of the biofilm development on the Kaldness carriers. This paper provides possible strategies to optimize the various operational parameters that influence the initial biofilm formation and development in an AFBR and similar high rate anaerobic reactors, hence can be used to reduce the long time required for process start-up. Copyright © 2016 Elsevier Ltd. All rights reserved.

Treating Gulf War Illness with Novel Anti-Inflammatories: A Screening of Botantical Microglia Modulators

DTIC Science & Technology

2016-10-01

approval and initiated advertising , recruitment, participant screening, participant enrollment, and the study protocol. All start up subtasks have been...be made to enroll these during the next reporting period. Advertisement , recruitment, screening, and enrollment are ongoing as we work toward the...Regulatory Approvals 100% Completed. • Task 3: Start up 100% Completed. Milestone: Protocol ready to begin—Completed • Task 4: Advertisement 40

Start-up of a pilot-scale anaerobic fixed film reactor at low temperature treating slaughterhouse wastewater.

PubMed

del Pozo, R; Diez, V; Salazar, G

2002-01-01

A pilot-scale anaerobic fixed film reactor (AFFR) with vertically arranged PVC tubes as biomass carrier, treating poultry slaughterhouse wastewater was started-up in 74 days at temperatures between 20-24 degrees C. The start-up process consisted of a long acclimatization phase followed by a low loaded growth phase, a gradual increase of OLR upto 9.2 kg COD/m3d, and a final maturation phase at moderated loads of 2.7 kg COD/m3d at which total COD removal efficiencies of 57% were achieved. Alkalinity ratio IA:PA was found to be the best control parameter to avoid VFA accumulation. OLR increase based on pH control was not satisfactory because changes in CO2 solubility caused daily by temperature and flow variations led to pH oscillations of 0.2 units. The low wastewater alkalinity, 260 mg/l CaCO3 was insufficient to buffer the pH system, therefore the pH decrease associated with the VFA accumulation was not easily detected and could not be used as a way of OLR control. Organic matter removal took place by accumulation and biodegradation processes. Limitation in the reactor hydrodynamics and particulate fraction hydrolysis was detected at high flow rates.

Boreal Summer ISO hindcast experiment: preliminary results from SNU

NASA Astrophysics Data System (ADS)

Heo, S.; Kang, I.; Kim, D.; Ham, Y.

2010-12-01

As a part of internationally coordinated research program, hindcast experiments with focus on boreal summer intraseasonal oscillation (ISO) have been done in Seoul National University (SNU). This study aims to show preliminary results from SNU’s efforts. The ISO prediction system used in the hindcast experiment consists of SNU coupled model and SNU initialization method. The SNU coupled model is an ocean-atmosphere coupled model which couples the SNU Atmospheric GCM (SNU AGCM) to the Modular Ocean Model ver.2.2 (MOM2.2) Ocean GCM developed at Geophysical Fluid Dynamics Laboratory (GFDL). In the SNU initialization method, both atmospheric and oceanic states are nudged toward reanalysis data (ERAinterim and GODAS) before prediction starting date. For the results here, 2 ensemble members are generated by using different nudging period, 8 and 9 days, respectively. The initial dates of 45-day predictions are the 1st, 11th, 21st of months during boreal summer season (May to October). Prediction skills and its dependency on the initial amplitude, the initial phase, and the number of ensemble members are investigated using the Real-time Multivariate MJO (RMM) index suggested by Wheeler and Hendon (2004). It is shown in our hindcast experiment that, after 13 forecast lead days (the forecast skill is about 0.7), the prediction skill does not depend on the strength of the initial state. Also, we found that the prediction skill has a phase dependency. The prediction skill is particularly low when the convective center related to the MJO is over the Indian Ocean (phase 2). The ensemble prediction has more improved correlation skill than each member. To better understand the phase dependency, we compared the observed and predicted behavior of the MJO that propagates from different starting phases. The phase speed of the prediction is slower than the observation. The MJO in the hindcast experiment propagates with weaker amplitudes than observed except for initial phase 3. Also investigated is the climatology and anomalies of precipitable water to understand the difference of the propagation. The difference between observed and predicted climatology shows strong dry bias over the eastern Indian Ocean, in where convective anomalies are not properly developed in hindcast data, especially those from initial phase 2. Our results suggest possible impacts of mean bias on prediction skills of the MJO.

Why are HIV-infected people not started on antiretroviral therapy? A mixed-methods study from Gujarat, India

PubMed Central

Shringarpure, K.; Modi, B.; Sharma, R.; Rewari, B. B.; Shah, A. N.; Verma, P. B.; Dongre, A. R.; Kumar, A. M. V.

2017-01-01

Setting: Five purposively selected antiretroviral therapy (ART) centres in Gujarat, India. Objectives: To assess the proportion of ART-eligible people living with the human immunodeficiency virus (PLHIV) who were not initiated on ART within 2 months of being recorded as eligible, to identify factors associated with non-initiation and to explore reasons from the provider's perspective. Design: We used a mixed-methods design (triangulation) of 1) a quantitative phase involving record reviews and cohort analysis (Poisson regression) of PLHIV registered during April 2014–March 2015, and 2) a qualitative phase involving one-to-one interviews with 25 providers. Results: Of 2079 ART-eligible PLHIV, 339 (16%) were not started on ART within 2 months. PLHIV with CD4 counts of <350 cells/μl and patients who were labourers, hospitalised, bedridden or registered with certain ART centres were more likely not to be initiated on ART. Qualitative results were categorised into two broad themes: government health system- and patient-related challenges, which validated and complemented the quantitative findings. Conclusion: Several patient subgroups at greater risk of ART non-initiation were identified, along with reasons for risk; this has important programme implications for achieving the UNAIDS 90–90–90 goal, and particularly the second 90 component of having 90% of diagnosed PLHIV start ART. PMID:29201653

[Revival after Ebola: multidisciplinary assessment at 1 year, prospect and follow-up study of surviving patients from Ebola in Guinea (PostEboGui cohort)].

PubMed

Msellati, P; Touré, A; Sow, M S; Cécé, K; Taverne, B; Desclaux, A; Barry, M; Etard, J-F; Delaporte, E

2016-10-01

Ebola virus disease (EVD) epidemic that spread in West Africa from the end of 2013 to early 2016 has reached more people than all past epidemics. Beyond care management of acute phase ill patients and measures for the control of the epidemic, the outcome of Ebola survivors became an important question as their number increased and raised new issues. A multidisciplinary prospective cohort of survivors in Guinea has been launched by IRD UMI 233 and Donka National Hospital, Conakry, Guinea, to assess the long-term clinical, psychological, sociological, immunological, and viral outcomes potentially related to EVD. This paper describes PostEboGui Programme, constraints and changes to the initial proposal, participants, first results, and new issues, 1 year after its start, in a descriptive and critical view. We started also to work on ethical aspects in the context of epidemics and of mass interventions with a risk of overinvestigation of patients.

A lunar construction shack vehicle: Final design

NASA Technical Reports Server (NTRS)

1988-01-01

A lunar construction shack vehicle is a critical component in most of the plans proposed for the construction of a permanent base on the moon. The Selene Engineering Company (SEC) has developed a concept for this vehicle which is both innovative and practical. The design makes use of the most advanced technology available to meet the goals for a safe, versatile and durable habitat that will serve as a starting point for the initial phase of the construction of a permanent lunar base. This document outlines SEC's proposed design for a lander vehicle which will be fully self-sufficient and will provide for all necessary life support, including consumables and radiation protection, needed by the construction crew until they can complete the assembly of a more permanent habitat. Since it is highly likely that it will take more than one crew to complete the construction of a permanent lunar base, the design emphasis is on systems which can be easily maintained and resupplied and which will take a minimum of start up preparation by succeeding crews.

Columbia Switches to Automatic Fire Detection

ERIC Educational Resources Information Center

Gardner, John C.

1978-01-01

Columbia University has started a project that, in the first two phases, will provide an internal fire alarm system to residence halls and academic buildings. The third phase will be major structural changes to bring older academic buildings up to meet new life safety codes. (Author/MLF)

Current status of the joint Mayo Clinic-IBM PACS project

NASA Astrophysics Data System (ADS)

Hangiandreou, Nicholas J.; Williamson, Byrn, Jr.; Gehring, Dale G.; Persons, Kenneth R.; Reardon, Frank J.; Salutz, James R.; Felmlee, Joel P.; Loewen, M. D.; Forbes, Glenn S.

1994-05-01

A multi-phase collaboration between Mayo Clinic and IBM-Rochester was undertaken, with the goal of developing a picture archiving and communication system for routine clinical use in the Radiology Department. The initial phase of this project (phase 0) was started in 1988. The current system has been fully integrated into the clinical practice and, to date, over 6.5 million images from 16 imaging modalities have been archived. Phase 3 of this project has recently concluded.

Intrinsic rhythm and basic tonus in insect skeletal muscle.

PubMed

Hoyle, G

1978-04-01

The jumping muscle of orthopterous insects contains fibres that possess an intrinsic rhythm (IR) of slow contraction. The contributing fibres are generally synchronized, but as many as three or four pacemakers are present. The frequency, amplitude and duration of IR contractions fluctuate erratically over a 24 h period. Metathoracic DUM neurone bursts suppress IR for a few minutes. Other, unidentified dorsal neurones enhance its amplitude. In addition to IR, the extensor tibiae shows intrinsic basic tonus (BT). BT is relaxed for several s by low-frequency burst output from unidentified metathoracic dorsal neurones. DUM neurone bursts may enhance extensor BT, relax it, or leave it unaffected. The effects on IR of various regimes of activity in the slow extensor tibiae (SETi) and the common inhibitor (CI) axons were examined. CI affects IR when stimulated at frequencies above 2 Hz. It causes amplitude depression and reduced duration of individual IR contractions as well as increased frequency. At 30 Hz and above, CI completely suppresses IR. An enhanced IR contraction starts within a few milliseconds of the termination of a CI train. At low frequencies (below 10 Hz) SETi causes increased frequency and decreased amplitude of IR, with a depressed IR contraction following cessation of the SETi burst. At frequencies above 15 Hz the SETi-evoked contraction dominates tension development, though IR summates with it during the rising phase. In quiescent preparations not showing IR, SETi stimulation at 10 Hz often started up IR. Single SETi or FETi impulses can initiate an IR contraction, and cause altered phasing, with up to a quintupling of frequency. After a critical period has elapsed following the onset of an IR contraction, a single single impulse in any one of the three axons will terminate it abruptly. The early termination is followed by a reduced interval which is proportional to the reduced IR contraction time. The rhythm of accumulated readiness to go into an IR contraction is independent of the pacemaker rhythm that initiates the contraction.

MAARSY - The new MST radar on Andøya: System description and first results

NASA Astrophysics Data System (ADS)

Latteck, Ralph; Zecha, Marius; Rapp, Markus; Stober, Gunter; Singer, Werner; Renkwitz, Toralf

2012-07-01

In 2011 the Leibniz-Institute of Atmospheric Physics in Kühlungsborn completed the installation of the Middle Atmosphere Alomar Radar System ({MAARSY}) on the North-Norwegian island Andøya. MAARSY is a 53.5 MHz monostatic radar with an active phased array antenna consisting of 433 Yagi antennas. The 3-element Yagi antennas are arranged in an equilateral triangular grid forming a circular aperture of approximately 6300 m^2. Each individual antenna is connected to its own transceiver with independent phase control and a scalable power output of up to 2 kW. This arrangement provides very high flexibility of beam forming and beam steering with a symmetric radar beam of a minimum beam width of 3.6°. The system allows classical beam swinging operation as well as experiments with simultaneous multiple beams and the use of interferometric applications for improved studies of the Arctic atmosphere from the troposphere up to the lower thermosphere with high spatio-temporal resolution. Standard observations of tropospheric winds and polar mesosphere summer echoes started immediately with an initial stage of expansion in spring 2010. Meteor head echo experiments and 3D observations of polar mesospheric winter echoes were conducted after an upgrade of the system in December 2010. Multi-beam experiments using up to 97 beams quasi-simultaneously in the mesosphere have been carried out during campaigns in summer 2011 with the completed system. We present a system description of MAARSY including beam pattern validation and show initial results from various campaigns obtained during the first 2 years of operation.

Philadelphia's Renaissance Schools: A Report on Start up and Early Implementation

ERIC Educational Resources Information Center

Gold, Eva; Good, Deborah; Robertson-Kraft, Claire; Callahan, M. Kate

2011-01-01

In April 2009, Superintendent Arlene Ackerman announced her reform plan for the School District of Philadelphia (the District)--"Imagine 2014". Among other major initiatives, "Imagine 2014" laid the groundwork for Philadelphia's Renaissance Schools Initiative. The Renaissance Initiative, set to enter its second year in 2011-12,…

POWER AND INFLUENCE CHARTING: THE GOOGLE WAY

DOE Office of Scientific and Technical Information (OSTI.GOV)

Troy Hiltbrand; Sharon Berrett

2011-07-01

The success or failure of a project may be charted in the initiation phase. Therefore, initiation is arguably the most important phase of any project. During the initiation phase, the foundation for the project is established, including the selection of project sponsors and champions and getting their buy-in, which sets the project up for success.

Experimental investigation of the ECRH stray radiation during the start-up phase in Wendelstein 7-X

NASA Astrophysics Data System (ADS)

Moseev, Dmitry; Laqua, Heinrich; Marsen, Stefan; Stange, Torsten; Braune, Harald; Erckmann, Volker; Gellert, Florian; Oosterbeek, Johann Wilhelm; Wenzel, Uwe

2017-07-01

Electron cyclotron resonance heating (ECRH) is the main heating mechanism in the Wendelstein 7-X stellarator (W7-X). W7-X is equipped with five absolutely calibrated sniffer probes that are installed in each of the five modules of the device. The sniffer probes monitor energy flux of unabsorbed ECRH radiation in the device and interlocks are fed with the sniffer probe signals. The stray radiation level in the device changes significantly during the start-up phase: plasma is a strong microwave absorber and during its formation the stray radiation level in sniffer probes reduces by more than 95%. In this paper, we discuss the influence of neutral gas pressure and gyrotron power on plasma breakdown processes.

Patients present earlier and survival has improved, but pre-ART attrition is high in a six-year HIV cohort data from Ethiopia.

PubMed

Mulissa, Zewdie; Jerene, Degu; Lindtjørn, Bernt

2010-10-11

Previous studies showed higher early mortality rates among patients treated with antiretroviral drugs in settings with limited resources. One of the reasons was late presentation of patients to care. With improved access to HIV services, we expect improvements in disease stage at presentation. Our objective was to assess the effect of improved availability of HIV services on patient presentation to care and subsequent pre-ART and on-ART outcomes. At Arba Minch Hospital in Ethiopia, we reviewed baseline characteristics and outcomes of 2191 adult HIV patients. Nearly a half were in WHO stage III at presentation. About two-thirds of the patients (1428) started ART. Patients enrolled in the early phase (OR = 4.03, 95% CI 3.07-5.27), men (OR = 1.78, 95%CI 1.47-2.16), and those aged 45 years and above (OR = 2.04, 95%CI 1.48-2.82) were at higher risk of being in advanced clinical stage at presentation. The pre-treatment mortality rate was 13.1 per 100 PYO, ranging from 1.4 in the rapid scale-up phase to 25.9 per 100 PYO in the early phase. A quarter of the patients were lost to follow-up before starting treatment. Being in less advanced stage (HR = 1.9, 95% CI = 1.6, 2.2), being in the recent cohort (HR = 2.0, 95% CI = 1.6, 2.6), and rural residence (HR = 1.8, 95% CI = 1.5, 2.2) were independent predictors of pre-ART loss to follow-up. Of those who started ART, 13.4% were lost to follow-up and 15.4% died. The survival improved during the study. Patients with advanced disease, men and older people had higher death rates. Patients started to present at earlier stages of their illness and death has decreased among adult HIV patients visiting Arba Minch Hospital. However, many patients were lost from pre-treatment follow-up. Early treatment start contributed to improved survival. Both pre-ART and on-ART patient retention mechanisms should be strengthened.

Apollo(R) Thin Film Process Development: Final Technical Report, April 1998 - April 2002

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cunningham, D.W.

2002-10-01

BP Solar first started investigative work on CdTe photovoltaics in 1986. The module product name chosen for the CdTe devices is Apollo. The deposition method chosen was electrochemical deposition due to its simplicity and good control of stoichiometric composition. The window layer used is CdS, produced from a chemical-bath deposition. Initial work focused on increasing photovoltaic cell size from a few mm2 to 900 cm2. At BP Solar's Fairfield plant, work is focused on increasing semiconductor deposition to 1 m2. The primary objective of this subcontract is to establish the conditions required for the efficient plating of CdS/CdTe on large-area,more » transparent conducting tin-oxide-coated glass superstrate. The initial phase concentrates on superstrate sizes up to 0.55 m2. Later phases will include work on 0.94 m2 superstrates. The tasks in this subcontract have been split into four main categories: (1) CdS and CdTe film studies; (2) Enhanced laser processing; (3) Outdoor testing program for the Apollo module; and (4) Production waste abatement and closed loop study.« less

Octahedral tilting, monoclinic phase and the phase diagram of PZT

NASA Astrophysics Data System (ADS)

Cordero, F.; Trequattrini, F.; Craciun, F.; Galassi, C.

2011-10-01

Anelastic and dielectric spectroscopy measurements on PbZr1-xTixO3 (PZT) close to the morphotropic (MPB) and antiferroelectric boundaries provide new insight into some controversial aspects of its phase diagram. No evidence is found of a border separating monoclinic (M) from rhombohedral (R) phases, in agreement with recent structural studies supporting a coexistence of the two phases over a broad composition range x < 0.5, with the fraction of M increasing toward the MPB. It is also discussed why the observed maximum of elastic compliance appears to be due to a rotational instability of the polarization linearly coupled to shear strain. Therefore it cannot be explained by extrinsic softening from finely twinned R phase alone, but indicates the presence also of M phase, not necessarily homogeneous. A new diffuse transition is found within the ferroelectric phase near x ˜ 0.1, at a temperature TIT higher than the well established boundary TT to the phase with tilted octahedra. It is proposed that around TIT the octahedra start rotating in a disordered manner and finally become ordered below TT. In this interpretation, the onset temperature for octahedral tilting monotonically increases up to the antiferroelectric transition of PbZrO3, and the depression of TT(x) below x = 0.18 would be a consequence of the partial relief of the mismatch between the average cation radii with the initial stage of tilting below TIT.

Evolution of the East Philippine Arc: experimental constraints on magmatic phase relations and adakitic melt formation

NASA Astrophysics Data System (ADS)

Coldwell, B.; Adam, J.; Rushmer, T.; MacPherson, C. G.

2011-10-01

Piston-cylinder experiments on a Pleistocene adakite from Mindanao in the Philippines have been used to establish near-liquidus and sub-liquidus phase relationships relevant to conditions in the East Philippines subduction zone. The experimental starting material belongs to a consanguineous suite of adakitic andesites. Experiments were conducted at pressures from 0.5 to 2 GPa and temperatures from 950 to 1,150°C. With 5 wt. % of dissolved H2O in the starting mix, garnet, clinopyroxene and orthopyroxene are liquidus phases at pressures above 1.5 GPa, whereas clinopyroxene and orthopyroxene are liquidus (or near-liquidus) phases at pressures <1.5 GPa. Although amphibole is not a liquidus phase under any of the conditions examined, it is stable under sub-liquidus conditions at temperature ≤1,050°C and pressures up to 1.5 GPa. When combined with petrographic observations and bulk rock chemical data for the Mindanao adakites, these findings are consistent with polybaric fractionation that initially involved garnet (at pressures >1.5 GPa) and subsequently involved the lower pressure fractionation of amphibole, plagioclase and subordinate clinopyroxene. Thus, the distinctive Y and HREE depletions of the andesitic adakites (which distinguish them from associated non-adakitic andesites) must be established relatively early in the fractionation process. Our experiments show that this early fractionation must have occurred at pressures >1.5 GPa and, thus, deeper than the Mindanao Moho. Published thermal models of the Philippine Sea Plate preclude a direct origin by melting of the subducting ocean crust. Thus, our results favour a model whereby basaltic arc melt underwent high-pressure crystal fractionation while stalled beneath immature arc lithosphere. This produced residual magma of adakitic character which underwent further fractionation at relatively low (i.e. crustal) pressures before being erupted.

Initial results in SST-1 after up-gradation

NASA Astrophysics Data System (ADS)

Pradhan, S.; Khan, Z.; Tanna, V. L.; Prasad, U.; Paravastu, Y.; Raval, D. C.; Masand, H.; Kumar, Aveg; Dhongde, J. R.; Jana, S.; Kakati, B.; Patel, K. B.; Bhandarkar, M. K.; Shukla, B. K.; Ghosh, D.; Patel, H. S.; Parekh, T. J.; Mansuri, I. A.; Dhanani, K. R.; Varadharajulu, A.; Khristi, Y. S.; Biswas, P.; Gupta, C. N.; George, S.; Semwal, P.; Sharma, D. K.; Gulati, H. K.; Mahajan, K.; Praghi, B. R.; Banaudha, M.; Makwana, A. R.; Chudasma, H. H.; Kumar, M.; Manchanda, R.; Joisa, Y. S.; Asudani, K.; Pandya, S. N.; Pathak, S. K.; Banerjee, S.; Patel, P. J.; Santra, P.; Pathan, F. S.; Chauhan, P. K.; Khan, M. S.; Thankey, P. L.; Prakash, A.; Panchal, P. N.; Panchal, R. N.; Patel, R. J.; Mahsuria, G. I.; Sonara, D. P.; Patel, K. M.; Jayaswal, S. P.; Sharma, M.; Patel, J. C.; Varmora, P.; Srikanth, G. L. N.; Christian, D. R.; Garg, A.; Bairagi, N.; Babu, G. R.; Panchal, A. G.; Vora, M. M.; Singh, A. K.; Sharma, R.; Nimavat, H. D.; Shah, P. R.; Purwar, G.; Raval, T. Y.; Sharma, A. L.; Ojha, A.; Kumar, S.; Ramaiya, N. K.; Siju, V.; Gopalakrishna, M. V.; Kumar, A.; Sharma, P. K.; Atrey, P. K.; Kulkarni, SV; Ambulkar, K. K.; Parmar, P. R.; Thakur, A. L.; Raval, J. V.; Purohit, S.; Mishra, P. K.; Adhiya, A. N.; Nagora, U. C.; Thomas, J.; Chaudhari, V. K.; Patel, K. G.; Dalakoti, S.; Virani, C. G.; Gupta, S.; Kumar, Ajay; Chaudhari, B.; Kaur, R.; Srinivasan, R.; Raju, D.; Kanabar, D. H.; Jha, R.; Das, A.; Bora, D.

2017-04-01

SST-1 Tokamak has recently completed the 1st phase of up-gradation with successful installation and integration of all its First Wall components. The First Wall of SST-1 comprises of ∼ 3800 high heat flux compatible graphite tiles being assembled and installed on 132 CuCrZr heat sink back plates engraved with ∼ 4 km of leak tight baking and cooling channels in five major sub groups equipped with ∼ 400 sensors and weighing ∼ 6000 kg in total in thirteen isolated galvanic and six isolated hydraulic circuits. The phase-1 up-gradation spectrum also includes addition of Supersonic Molecular Beam Injection (SMBI) both on the in-board and out-board side, installation of fast reciprocating probes, adding some edge plasma probe diagnostics in the SOL region, installation and integration of segmented and up-down symmetric radial coils aiding/controlling plasma rotations, introduction of plasma position feedback and density controls etc. Post phase-I up-gradation spanning from Nov 2014 till June 2016, initial plasma experiments in up-graded SST-1 have begun since Aug 2016 after a brief engineering validation period in SST-1. The first experiments in SST-1 have revealed interesting aspects on the ‘eddy currents in the First Wall support structures’ influencing the ‘magnetic Null evolution dynamics’ and the subsequent plasma start-up characteristics after the ECH pre-ionization, the influence of the first walls on the ‘field errors’ and the resulting locked modes observed, the magnetic index influencing the evolution of the equilibrium of the plasma column, low density supra-thermal electron induced discharges and normal ohmic discharges etc. Presently; repeatable ohmic discharges regimes in SST-1 having plasma currents in excess of 65 KA (qa ∼ 3.8, BT = 1.5 T) with a current ramp rates ∼ 1.2 MA/s over a duration of ∼ 300 ms with line averaged densities ∼ 0.8 × 1019 and temperatures ∼ 200 eV with copious MHD signatures have been experimentally established. Further elongation of the plasma duration up to one second or more with position and density feedback as well as coupling of Lower Hybrid waves are currently being persuaded in SST-1 apart from increasing the core plasma parameters with further optimizations and with wall conditioning.

Suppressing Transients In Digital Phase-Locked Loops

NASA Technical Reports Server (NTRS)

Thomas, J. B.

1993-01-01

Loop of arbitrary order starts in steady-state lock. Method for initializing variables of digital phase-locked loop reduces or eliminates transients in phase and frequency typically occurring during acquisition of lock on signal or when changes made in values of loop-filter parameters called "loop constants". Enables direct acquisition by third-order loop without prior acquisition by second-order loop of greater bandwidth, and eliminates those perturbations in phase and frequency lock occurring when loop constants changed by arbitrarily large amounts.

EMG and mechanical changes during sprint starts at different front block obliquities.

PubMed

Guissard, N; Duchateau, J; Hainaut, K

1992-11-01

The effect of decreased front block obliquity on start velocity was studied during sprint starts. The electromyographic (EMG) activity of the medial gastrocnemius (MG), the soleus (Sol), and the vastus medialis (VM) was recorded and analyzed at a 70 degrees, a 50 degrees, and a 30 degrees angle between the foot plate surface and the horizontal. Integrated EMGs (IEMG) were compared with muscle length changes in the MG and Sol in relation to foot and knee movements. The results indicate that decreasing front block obliquity significantly (P < 0.05) increases the start velocity without any change to the total duration of the pushing phase and the overall EMG activity. This improvement in sprint start performance is associated with the enhanced contribution of the MG during eccentric and concentric phases of calf muscles contraction. In the "set position" the initial length of MG and Sol is increased at 50 degrees and 30 degrees as compared with 70 degrees. The subsequent stretch-shortening cycle is improved and contributes more effectively to the speed of the muscle shortening. Moreover, lengthening these muscles during the eccentric phase stretches the muscle spindles, and the reflex activities that contribute to the observed increase in the MG IEMG, are present when the slope of the block is reduced. The results indicate that decreasing front block obliquity induces neural and mechanical modifications that contribute to increasing the sprint start velocity without any increase in the duration of the pushing phase.(ABSTRACT TRUNCATED AT 250 WORDS)

Phase control and fast start-up of a magnetron using modulation of an addressable faceted cathode

DOE Office of Scientific and Technical Information (OSTI.GOV)

Browning, J., E-mail: JimBrowning@BoiseState.edu; Fernandez-Gutierrez, S.; Lin, M. C.

The use of an addressable, faceted cathode has been proposed as a method of modulating current injection in a magnetron to improve performance and control phase. To implement the controllable electron emission, five-sided and ten-sided faceted planar cathodes employing gated field emitters are considered as these emitters could be fabricated on flat substrates. For demonstration, the conformal finite-difference time-domain particle-in-cell simulation, as implemented in VORPAL, has been used to model a ten-cavity, rising sun magnetron using the modulated current sources and benchmarked against a typical continuous current source. For the modulated, ten-sided faceted cathode case, the electrons are injected frommore » three emitter elements on each of the ten facets. Each emitter is turned ON and OFF in sequence at the oscillating frequency with five emitters ON at one time to drive the five electron spokes of the π-mode. The emitter duty cycle is then 1/6th the Radio-Frequency (RF) period. Simulations show a fast start-up time as low as 35 ns for the modulated case compared to 100 ns for the continuous current cases. Analysis of the RF phase using the electron spoke locations and the RF magnetic field components shows that the phase is controlled for the modulated case while it is random, as typical, for the continuous current case. Active phase control during oscillation was demonstrated by shifting the phase of the electron injection 180° after oscillations started. The 180° phase shift time was approximately 25 RF cycles.« less

Floor Identification with Commercial Smartphones in Wifi-Based Indoor Localization System

NASA Astrophysics Data System (ADS)

Ai, H. J.; Liu, M. Y.; Shi, Y. M.; Zhao, J. Q.

2016-06-01

In this paper, we utilize novel sensors built-in commercial smart devices to propose a schema which can identify floors with high accuracy and efficiency. This schema can be divided into two modules: floor identifying and floor change detection. Floor identifying module starts at initial phase of positioning, and responsible for determining which floor the positioning start. We have estimated two methods to identify initial floor based on K-Nearest Neighbors (KNN) and BP Neural Network, respectively. In order to improve performance of KNN algorithm, we proposed a novel method based on weighting signal strength, which can identify floors robust and quickly. Floor change detection module turns on after entering into continues positioning procedure. In this module, sensors (such as accelerometer and barometer) of smart devices are used to determine whether the user is going up and down stairs or taking an elevator. This method has fused different kinds of sensor data and can adapt various motion pattern of users. We conduct our experiment with mobile client on Android Phone (Nexus 5) at a four-floors building with an open area between the second and third floor. The results demonstrate that our scheme can achieve an accuracy of 99% to identify floor and 97% to detecting floor changes as a whole.

Demonstration of Inductive Flux Saving by Transient CHI on NSTX

NASA Astrophysics Data System (ADS)

Raman, Roger

2010-11-01

Experiments in NSTX have now demonstrated the saving of central solenoid flux equivalent to 200kA of toroidal plasma current after coupling plasmas produced by Transient Coaxial Helicity Injection (CHI) to inductive sustainment and ramp-up of the toroidal plasma current [R. Raman, et al., PRL 104, 095003 (2010)]. This is a record for non-inductive plasma startup, and an important step for developing the spherical torus concept. With an injector current of only 4kA and total power supply energy of only 21 kJ, CHI initiated a toroidal current of 250 kA that when coupled to 0.11 Vs of induction ramped up to 525 kA without using any auxiliary heating, whereas an otherwise identical inductive-only discharge ramped to only 325 kA. This flux saving was realized by reducing the influx of low-Z impurities during the start-up phase through the use of electrode conditioning discharges, followed by lithium evaporative coating of the plasma-facing surfaces and reducing parasitic arcs in the upper divertor region through use of additional shaping-field coils. As a result of these improvements, and for the first time in NSTX, the electron temperature during the CHI phase continually increased with input energy, indicating that the additional injected energy was contributing to heating the plasma instead of being lost through impurity line radiation. Simulations with the Tokamak Simulation Code (TSC) show that the observed scaling of CHI start-up current with toroidal field in NSTX is consistent with theory, suggesting that use of CHI on larger machines is quite attractive. These exciting results from NSTX demonstrate that CHI is a viable solenoid-free plasma startup method for future STs and tokamaks. This work supported by U.S. DOE Contracts DE-AC02-09CH11466 and DE-FG02-99ER54519 AM08.

Philadelphia's Renaissance Schools: Start up and Early Implementation. Executive Summary

ERIC Educational Resources Information Center

Research for Action, 2011

2011-01-01

In April 2009, Superintendent Arlene Ackerman announced her reform plan for the School District of Philadelphia (the District)--"Imagine 2014". Among other major initiatives, "Imagine 2014" laid the groundwork for Philadelphia's Renaissance Schools Initiative. The Renaissance Initiative, set to enter its second year in 2011-12, is an effort to…

Neutron and hard X-ray diffraction studies of the isothermal transformation kinetics in the research reactor fuel candidate U–8 wt%Mo

PubMed Central

Säubert, Steffen; Jungwirth, Rainer; Zweifel, Tobias; Hofmann, Michael; Hoelzel, Markus; Petry, Winfried

2016-01-01

Exposing uranium–molybdenum alloys (UMo) retained in the γ phase to elevated temperatures leads to transformation reactions during which the γ-UMo phase decomposes into the thermal equilibrium phases, i.e. U2Mo and α-U. Since α-U is not suitable for a nuclear fuel exposed to high burn-up, it is necessary to retain the γ-UMo phase during the production process of the fuel elements for modern high-performance research reactors. The present work deals with the isothermal transformation kinetics in U–8 wt%Mo alloys for temperatures between 673 and 798 K and annealing durations of up to 48 h. Annealed samples were examined at room temperature using either X-ray or neutron diffraction to determine the phase composition after thermal treatment, and in situ annealing studies disclosed the onset of phase decomposition. While for temperatures of 698 and 673 K the start of decomposition is delayed, for higher temperatures the first signs of transformation are already observable within 3 h of annealing. The typical C-shaped curves in a time–temperature–transformation (TTT) diagram for both the start and the end of phase decomposition could be determined in the observed temperature regime. Therefore, a revised TTT diagram for U–8 wt%Mo between 673 and 798 K and annealing durations of up to 48 h is proposed. PMID:27275139

Improvement of start-up and nitrogen removal of the anammox process in reactors inoculated with conventional activated sludge using biofilm carrier materials.

PubMed

Lu, Yi-Feng; Ma, Li-Juan; Ma, Lan; Shan, Bei; Chang, Jun-Jun

2018-01-01

The start-up of the anaerobic ammonium oxidation (anammox) process in three up-flow column reactors seeded with common mixed activated sludge and added with three materials, sponge (R1), sponge + volcanic rock (R2) and sponge + charcoal (R3), as carriers for biofilm formation were comparatively investigated in this study. The supplement of volcanic rock and charcoal could significantly shorten the start-up time of the anammox process, which primarily occurred in the activity-enhanced phase, with ammonium and nitrite removal efficiencies stabilized above 92.5% and 93.4% after an operation period of 145, 105 and 121 d for R1, R2 and R3, respectively. After the successful anammox start-up, R2 performed significantly better in TN removal (p < .05), achieving an average rate of 91.0% and 191.5 g N m -3  d -1 compared to R1 of 88.4% and 172.1 g N m -3  d -1 , and R3 of 89.9% and 180.1 g N m -3  d -1 in the steady running phase. The ratios of consumed [Formula: see text] and generated [Formula: see text]/consumed [Formula: see text] after anammox start-up were lower than the theoretical values, probably suggesting the simultaneous existences of anammox, denitrification as well as nitrification processes in the reactors. A reddish brown biofilm was wrapped on the carriers and morphological detection of biofilm displayed the presentations of thick and compact floc aggregates and some filamentous bacteria on the sponge, and spherical-, ovoid- and shortrod-shaped microorganisms on the volcanic rock and charcoal. Using porous material as carrier for biofilm development is an effective strategy for practical application of the anammox reactor.

Development of Coriolis mass flowmeter with digital drive and signal processing technology.

PubMed

Hou, Qi-Li; Xu, Ke-Jun; Fang, Min; Liu, Cui; Xiong, Wen-Jun

2013-09-01

Coriolis mass flowmeter (CMF) often suffers from two-phase flowrate which may cause flowtube stalling. To solve this problem, a digital drive method and a digital signal processing method of CMF is studied and implemented in this paper. A positive-negative step signal is used to initiate the flowtube oscillation without knowing the natural frequency of the flowtube. A digital zero-crossing detection method based on Lagrange interpolation is adopted to calculate the frequency and phase difference of the sensor output signals in order to synthesize the digital drive signal. The digital drive approach is implemented by a multiplying digital to analog converter (MDAC) and a direct digital synthesizer (DDS). A digital Coriolis mass flow transmitter is developed with a digital signal processor (DSP) to control the digital drive, and realize the signal processing. Water flow calibrations and gas-liquid two-phase flowrate experiments are conducted to examine the performance of the transmitter. The experimental results show that the transmitter shortens the start-up time and can maintain the oscillation of flowtube in two-phase flowrate condition. Copyright © 2013 ISA. Published by Elsevier Ltd. All rights reserved.

Automated de novo phasing and model building of coiled-coil proteins.

PubMed

Rämisch, Sebastian; Lizatović, Robert; André, Ingemar

2015-03-01

Models generated by de novo structure prediction can be very useful starting points for molecular replacement for systems where suitable structural homologues cannot be readily identified. Protein-protein complexes and de novo-designed proteins are examples of systems that can be challenging to phase. In this study, the potential of de novo models of protein complexes for use as starting points for molecular replacement is investigated. The approach is demonstrated using homomeric coiled-coil proteins, which are excellent model systems for oligomeric systems. Despite the stereotypical fold of coiled coils, initial phase estimation can be difficult and many structures have to be solved with experimental phasing. A method was developed for automatic structure determination of homomeric coiled coils from X-ray diffraction data. In a benchmark set of 24 coiled coils, ranging from dimers to pentamers with resolutions down to 2.5 Å, 22 systems were automatically solved, 11 of which had previously been solved by experimental phasing. The generated models contained 71-103% of the residues present in the deposited structures, had the correct sequence and had free R values that deviated on average by 0.01 from those of the respective reference structures. The electron-density maps were of sufficient quality that only minor manual editing was necessary to produce final structures. The method, named CCsolve, combines methods for de novo structure prediction, initial phase estimation and automated model building into one pipeline. CCsolve is robust against errors in the initial models and can readily be modified to make use of alternative crystallographic software. The results demonstrate the feasibility of de novo phasing of protein-protein complexes, an approach that could also be employed for other small systems beyond coiled coils.

G T-Mohr Start-up Reactivity Insertion Transient Analysis Using Simulink

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fard, Mehdi Reisi; Blue, Thomas E.; Miller, Don W.

2006-07-01

As a part of a Department of Energy-Nuclear Engineering Research Initiative (NERI) Project, we at OSU are investigating SiC semiconductor detectors as neutron power monitors for Generation IV power reactors. As a part of this project, we are investigating the power monitoring requirements for a specific type of Generation IV reactor, namely the GT-MHR. To evaluate the power monitoring requirements for the GT-MHR that are most demanding for a SiC diode power monitor, we have developed a Simulink model to study the transient behavior of the GT-MHR. In this paper, we describe the application of the Simulink code to themore » analysis of a series of Start-up Reactivity Insertion Transients (SURITs). The SURIT is considered to be a limiting protectable accident in terms of establishing the dynamic range of a SiC power monitor because of the low count rate of the detector during the start-up and absence of the reactivity feedback mechanism at the beginning of transient. The SURIT is studied with the ultimate goal of identifying combinations of 1) reactor power scram setpoints and 2) cram initiation times (the time in which a scram must be initiated once the setpoint is exceeded) for which the GT-MHR core is protected in the event of a continuous withdrawal of a control rod bank from the core from low powers. The SURIT is initiated by withdrawing a rod bank when the reactor is cold (300 K) and sub-critical at the BOEC (Beginning of Equilibrium Cycle) condition. Various initial power levels have been considered corresponding to various degrees of sub-criticality and various source strengths. An envelope of response is determined to establish which initial powers correspond to the worst case SURIT. (authors)« less

Alpha – omega and omega – alpha phase transformations in zirconium under hydrostatic pressure: A 3D mesoscale study

DOE PAGES

Yeddu, Hemantha Kumar; Zong, Hongxiang; Lookman, Turab

2015-09-28

Here, a three dimensional (3D) elastoplastic phase-field model is developed for modeling the hydrostatic pressure-induced alpha – omega phase transformation and the reverse phase transformation, i.e. omega – alpha, in zirconium (Zr). Plastic deformation and strain hardening of the material are also considered in the model. The microstructure evolution during both phase transformations is studied. The transformation start pressures at different temperatures are predicted and are plotted as a phase diagram. The effect of phase transformations on the mechanical properties of the material is also studied. The input data corresponding to pure Zr are acquired from experimental studies as wellmore » as by using the CALPHAD method. Our simulations show that three different omega variants form as laths. On release of pressure, reverse phase transformation initiates at lath boundaries. We observe that both phase transformations are martensitic in nature and also occur at the same pressure, i.e. little hysteresis. The transformation start pressures and the kinetics of the transformation predicted by our model are in good agreement with experimental results.« less

Alpha – omega and omega – alpha phase transformations in zirconium under hydrostatic pressure: A 3D mesoscale study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yeddu, Hemantha Kumar; Zong, Hongxiang; Lookman, Turab

Here, a three dimensional (3D) elastoplastic phase-field model is developed for modeling the hydrostatic pressure-induced alpha – omega phase transformation and the reverse phase transformation, i.e. omega – alpha, in zirconium (Zr). Plastic deformation and strain hardening of the material are also considered in the model. The microstructure evolution during both phase transformations is studied. The transformation start pressures at different temperatures are predicted and are plotted as a phase diagram. The effect of phase transformations on the mechanical properties of the material is also studied. The input data corresponding to pure Zr are acquired from experimental studies as wellmore » as by using the CALPHAD method. Our simulations show that three different omega variants form as laths. On release of pressure, reverse phase transformation initiates at lath boundaries. We observe that both phase transformations are martensitic in nature and also occur at the same pressure, i.e. little hysteresis. The transformation start pressures and the kinetics of the transformation predicted by our model are in good agreement with experimental results.« less

[Start-up grants for young scientists in German medical universities : Can the clinical scientist be saved?

PubMed

Pabst, R; Linke, P B; Neudeck, N B A; Schmiel, M; Ernst, S B

2016-12-01

German medical faculties currently have severe financial problems. There is the conflict between financing teaching medical students, inpatient and outpatient costs and supporting basic and applied research. Young postdocs can apply for a grant to start research projects to establish techniques on publishing data as a basis for applying for grants from the German Research Foundation or foundations with a critical review system. Successful applicants from the years 1998-2011 were asked to answer a questionnaire. The annual number of applications ranged from 28 to 96 per year. Within the first period of our analysis ranging from 1998 to 2004, a mean number of 69.5 % ± 14.0 % of submitted grant applications were approved annually in comparison to an average approval of 30.9 % ± 11 % in the years 2006-2001. In total 353 projects were funded with a mean amount of money for a project of approximately 18,640 EUR. The mean amount of external grant money following the start-up period was 7.2 times the money initially spent. That is an excellent return of investment. There were no differences between applicants from the department of surgery or department of internal medicine. In the meantime, 56 % of men and 42 % of women have achieved the academic degree university lecturer (privatdozent). Furthermore, 71 % of the participants evaluated this start-up research as supportive for their postdoctoral qualification (habilitation). The program for initial investment for young postdocs by internal start-up grants is overall successful.

Influence of feed/inoculum ratios and waste cooking oil content on the mesophilic anaerobic digestion of food waste.

PubMed

Li, Yangyang; Jin, Yiying; Borrion, Aiduan; Li, Jinhui

2018-03-01

Information on the anaerobic digestion (AD) of food waste (FW) with different waste cooking oil contents is limited in terms of the effect of the initial substrate concentrations. In this work, batch tests were performed to evaluate the combined effects of waste cooking oil content (33-53%) and feed/inoculum (F/I) ratios (0.5-1.2) on biogas/methane yield, process stability parameters and organics reduction during the FW AD. Both waste cooking oil and the inoculation ratios were found to affect digestion parameters during the AD process start-up and the F/I ratio was the predominant factor affecting AD after the start-up phase. The possible inhibition due to acidification caused by volatile fatty acids accumulation, low pH values and long-chain fatty acids was reversible. The characteristics of the final digestate indicated a stable anaerobic system, whereas samples with F/I ratios ranging from 0.8 to 1.2 display higher propionic and valeric acid contents and high amounts of total ammonia nitrogen and free ammonia nitrogen. Overall, F/I ratios higher than 0.70 caused inhibition and resulted in low biogas/methane yields from the FW. Copyright © 2018 Elsevier Ltd. All rights reserved.

Explaining Gibbsean phase space to second year students

NASA Astrophysics Data System (ADS)

Vesely, Franz J.

2005-03-01

A new approach to teaching introductory statistical physics is presented. We recommend making extensive use of the fact that even systems with a very few degrees of freedom may display chaotic behaviour. This permits a didactic 'bottom-up' approach, starting out with toy systems whose phase space may be depicted on a screen or blackboard, then proceeding to ever higher dimensions in Gibbsean phase space.

Time to and factors associated with insulin initiation in patients with type 2 diabetes mellitus.

PubMed

Machado-Alba, Jorge Enrique; Machado-Duque, Manuel Enrique; Moreno-Gutierrez, Paula Andrea

2015-03-01

Determine the time between the start of oral antidiabetic therapy (OAD) and the initiation of insulin therapy and to establish factors associated with insulin prescription among patients with type 2 diabetes mellitus (T2DM) in Colombia. Cohort, retrospective, population-based study. We identify patients with T2DM who started OAD therapy between 1 January 2007 and 31 December 2008, and a 5-year follow-up was performed. Kaplan-Meier survival analysis for time to start insulin therapy was generated and factors associated with insulin initiation were determined using logistic regression. A total of 1042 patients (52.4% women), mean age 63.4 years at the start of pharmacological treatment. After 5 years, 272 patients (26.1%) initiated insulin therapy. Using combination therapy of metformin and glibenclamide was associated with greater risk of insulin initiation (OR: 1.64, 95% CI: 1.12-2.40, p=0.010), while being a male over 45 years of age (OR: 0.59, 95% CI: 0.37-0.96, p=0.034) and initiating OAD therapy with metformin (OR: 0.30, 95% CI: 0.20-0.46, p<0.001) reduced the risk of insulin use. After 5 years of OAD treatment, 26.1% of people with T2DM started insulin therapy. Age, sex and type of initial OAD affected the probability of switching to insulin in these patients in Colombia. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Plain Language: Getting Started or Brushing Up

MedlinePlus

... Record Research & Training Medical Research Initiatives Science Highlights Science Education Research in NIH Labs & Clinics Training Opportunities Library Resources Research Resources Clinical Research Resources Safety, Regulation ...

Flux amplification and sustainment of ST plasmas by multi-pulsed coaxial helicity injection on HIST

NASA Astrophysics Data System (ADS)

Higashi, T.; Ishihara, M.; Kikuchi, Y.; Fukumoto, N.; Nagata, M.

2010-11-01

The Helicity Injected Spherical Torus (HIST) device has been developed towards high-current start up and sustainment by Multi-pulsed Coaxial Helicity Injection (M-CHI) method. Multiple pulses operation of the coaxial plasma gun can build the magnetic field of STs and spheromak plasmas in a stepwise manner. So far, successive gun pulses on SSPX at LLNL were demonstrated to maintain the magnetic field of spheromak in a quasi-steady state against resistive decay [1]. The resistive 3D-MHD numerical simulation [2] for STs reproduced the current amplification by the M-CHI method and confirmed that stochastic magnetic field was reduced during the decay phase. By double pulsed operation on HIST, the plasma current was effectively amplified against the resistive decay. The life time increases up to 10 ms which is longer than that in the single CHI case (4 ms). The edge poloidal fields last between 0.5 ms and 6 ms like a repetitive manner. During the second driven phase, the toroidal ion flow is driven in the same direction as the plasma current as well as in the initial driven phase. At the meeting, we will discuss a current amplification mechanism based on the merging process with the plasmoid injected secondly from the gun. [1] B. Hudson et al., Phys. Plasmas Vol.15, 056112 (2008). [2] Y. Kagei et al., J. Plasma Fusion Res. Vol.79, 217 (2003).

Signal Strength-Based Global Navigation Satellite System Performance Assessment in the Space Service Volume

NASA Technical Reports Server (NTRS)

Welch, Bryan W.

2016-01-01

NASA is participating in the International Committee on Global Navigation Satellite Systems (GNSS) (ICG)'s efforts towards demonstrating the benefits to the space user in the Space Service Volume (SSV) when a multi-GNSS solution space approach is utilized. The ICG Working Group: Enhancement of GNSS Performance, New Services and Capabilities has started a three phase analysis initiative as an outcome of recommendations at the ICG-10 meeting, in preparation for the ICG-11 meeting. The second phase of that increasing complexity and fidelity analysis initiative is based on augmenting the Phase 1 pure geometrical approach with signal strength-based limitations to determine if access is valid. The second phase of analysis has been completed, and the results are documented in this paper.

Principle Findings from Development of a Recirculated Exhaust Gas Intake Sensor (REGIS) Enabling Cost-Effective Fuel Efficiency Improvement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schnabel, Claus

Kick-off of the Bosch scope of work for the REGIS project started in October 2012. The primary work-packages included in the Bosch scope of work were the following: overall project management, development of the EGR sensor (design of sensor element, design of protection tube, and design of mounting orientation), development of EGR system control strategy, build-up of prototype sensors, evaluation of system performance with the new sensor and the new control strategy, long-term durability testing, and development of a 2nd generation sensor concept for continued technology development after the REGIS project. The University of Clemson was a partner with Boschmore » in the REGIS project. The Clemson scope of work for the REGIS project started in June 2013. The primary work-packages included in the Clemson scope of work were the following: development of EGR system control strategy, and evaluation of system performance with the new sensor and new control strategy. This project was split into phase I, phase II and phase III. Phase I work was completed by the end of June 2014 and included the following primary work packages: development of sensor technical requirements, assembly of engine testbench at Clemson, design concept for sensor housing, connector, and mounting orientation, build-up of EGR flow test benches at Bosch, and build-up of first sensor prototypes. Phase II work was completed by the end of June 2015 and included the following primary work pack ages: development of an optimizing function and demonstration of robustness of sensor, system control strategy implementation and initial validation, completion of engine in the loop testing of developed control algorithm, completion of sensor testing including characteristic line, synthetic gas test stand, and pressure dependency characterization, demonstration of benefits of control w/o sensing via simulation, development of 2nd generation sensor concept. Notable technical achievements from phase II were the following: publication of two new technical papers by Clemson detailing the control strategies used for the EGR system control. The two papers was published in the 2016 SAE World Congress in April 2016. The titles of each paper are, “Physics-Based Exhaust Pressure and Temperature Estimation for Low Pressure EGR Control in Turbocharged Gasoline Engines,” by K. Siokos, and “A Control Algorithm for Low Pressure – EGR Systems using a Smith Predictor with Intake Oxygen Sensor Feedback”, by R. Koli. All phase III work packages have been completed. The primary work packages in phase III were the following: completion of long-term sensor durability testing, final demonstration of benefits of EGR control w/o sensing, final decision of the second generation sensor development path.« less

Experimental and analytical study of stability characteristics of natural circulation boiling water reactors during startup transient

NASA Astrophysics Data System (ADS)

Woo, Kyoungsuk

Two-phase natural circulation loops are unstable at low pressure operating conditions. New reactor design relying on natural circulation for both normal and abnormal core cooling is susceptible to different types of flow instabilities. In contrast to forced circulation boiling water reactor (BWR), natural circulation BWR is started up without recirculation pumps. The tall chimney placed on the top of the core makes the system susceptible to flashing during low pressure start-up. In addition, the considerable saturation temperature variation may induce complicated dynamic behavior driven by thermal non-equilibrium between the liquid and steam. The thermal-hydraulic problems in two-phase natural circulation systems at low pressure and low power conditions are investigated through experimental methods. Fuel heat conduction, neutron kinetics, flow kinematics, energetics and dynamics that govern the flow behavior at low pressure, are formulated. A dimensionless analysis is introduced to obtain governing dimensionless groups which are groundwork of the system scaling. Based on the robust scaling method and start-up procedures of a typical natural circulation BWR, the simulation strategies for the transient with and without void reactivity feedback is developed. Three different heat-up rates are applied to the transient simulations to study characteristics of the stability during the start-up. Reducing heat-up rate leads to increase in the period of flashing-induced density wave oscillation and decrease in the system pressurization rate. However, reducing the heat-up rate is unable to completely prevent flashing-induced oscillations. Five characteristic regions of stability are discovered at low pressure conditions. They are stable single-phase, flashing near the separator, intermittent oscillation, sinusoidal oscillation and low subcooling stable regions. Stability maps were acquired for system pressures ranging 100 kPa to 400 kPa. According to experimental investigation, the flow becomes stable below a certain heat flux regardless of the inlet subcooling at the core and system pressure. At higher heat flux, unstable phenomena were indentified within a certain range of inlet subcooling. The unstable region diminishes as the system pressure increases. In natural circulation BWRs, the significant gravitational pressure drop over the tall chimney section induces a Type-I instability. The Type-I instability becomes especially important during low power and pressure conditions during reactor start-up. Under these circumstances the effect of pressure variations on the saturation enthalpy becomes significant. An experimental study shows that the flashing phenomenon in the adiabatic chimney section is dominant during the start-up of a natural circulation BWR. Since flashing occurs outside the core, nuclear feedback effects on the stability are small. Furthermore, the thermal-hydraulic oscillation period is much longer than power fluctuation period caused by void reactivity feedback. In the natural circulation system increasing the inlet restriction reduces the natural circulation flow rate, shifting the unstable region to higher inlet subcooling.

Flight evaluation of the DEEC secondary control air-start capability

NASA Technical Reports Server (NTRS)

Johnson, J. B.; Nelson, J.

1983-01-01

The air-start capability of a secondary engine control (SEC) was tested for a DEEC-equipped F100 engine and installed in an F-15 airplane. Two air-start schedules were tested. The first was referred to as the group I schedule; the second or revised schedule was the group II start schedule. Using the group I start schedule, an airspeed of 300 knots was required to ensure successful 40- and 25-percent SEC-mode air starts. If N2 were less than 40 percent, a stall would occur when the start bleeds closed 40 sec after initiation of the air start. All JFS-assisted air starts were successful with the group start schedule. For the group II schedule, the time between pressurization and start-bleed closure ranged between 50 and 72 sec depending on altitude. All air starts were successful above 225 knots givin a 75-knot reduction in required airspeed for a successful air start. Spooldown air starts of 40 percent were successful at 200 knots at altitudes up to 10,650 m and at 175 knots at altitudes up to 6100 m. Idle rpm was lower than the desired 65 percent for air starts at higher altitudes and lower airspeeds. All JSF-assisted air starts were successful.

ASASSN-15no: the Supernova that plays hide-and-seek

NASA Astrophysics Data System (ADS)

Benetti, S.; Zampieri, L.; Pastorello, A.; Cappellaro, E.; Pumo, M. L.; Elias-Rosa, N.; Ochner, P.; Terreran, G.; Tomasella, L.; Taubenberger, S.; Turatto, M.; Morales-Garoffolo, A.; Harutyunyan, A.; Tartaglia, L.

2018-05-01

We report the results of our follow-up campaign of the peculiar supernova ASASSN-15no, based on optical data covering ˜300 d of its evolution. Initially the spectra show a pure blackbody continuum. After few days, the HeI λλ 5876 transition appears with a P-Cygni profile and an expansion velocity of about 8700 km s-1. Fifty days after maximum, the spectrum shows signs typically seen in interacting supernovae. A broad (FWHM ˜ 8000 km s-1) Hα becomes more prominent with time until ˜150 d after maximum and quickly declines later on. At these phases Hαstarts to show an intermediate component, which together with the blue pseudo-continuum are clues that the ejecta begin to interact with the circumstellar medium (CSM). The spectra at the latest phases look very similar to the nebular spectra of stripped-envelope SNe. The early part (the first 40 d after maximum) of the bolometric curve, which peaks at a luminosity intermediate between normal and superluminous supernovae, is well reproduced by a model in which the energy budget is essentially coming from ejecta recombination and 56Ni decay. From the model, we infer a mass of the ejecta Mej = 2.6 M⊙; an initial radius of the photosphere R0 = 2.1 × 1014 cm; and an explosion energy Eexpl = 0.8 × 1051 erg. A possible scenario involves a massive and extended H-poor shell lost by the progenitor star a few years before explosion. The shell is hit, heated, and accelerated by the supernova ejecta. The accelerated shell+ejecta rapidly dilutes, unveiling the unperturbed supernova spectrum below. The outer ejecta start to interact with a H-poor external CSM lost by the progenitor system about 9-90 yr before the explosion.

Ionospheric Storm Effects and Equatorial Plasma Irregularities During the 17-18 March 2015 Event

NASA Technical Reports Server (NTRS)

Zhou, Yun-Liang; Luhr, Hermann; Xiong, Chao; Pfaff, Robert F.

2016-01-01

The intense magnetic storm on 17-18 March 2015 caused large disturbances of the ionosphere. Based on the plasma density (Ni) observations performed by the Swarm fleet of satellites, the Gravity Recovery and Climate Experiment mission, and the Communications/Navigation Outage Forecasting System satellite, we characterize the storm-related perturbations at low latitudes. All these satellites sampled the ionosphere in morning and evening time sectors where large modifications occurred. Modifications of plasma density are closely related to changes of the solar wind merging electric field (E (sub m)). We consider two mechanisms, prompt penetration electric field (PPEF) and disturbance dynamo electric field (DDEF), as the main cause for the Ni redistribution, but effects of meridional wind are also taken into account. At the start of the storm main phase, the PPEF is enhancing plasma density on the dayside and reducing it on the nightside. Later, DDEF takes over and causes the opposite reaction. Unexpectedly, there appears during the recovery phase a strong density enhancement in the morning/pre-noon sector and a severe Ni reduction in the afternoon/evening sector, and we suggest a combined effect of vertical plasma drift, and meridional wind is responsible for these ionospheric storm effects. Different from earlier studies about this storm, we also investigate the influence of storm dynamics on the initiation of equatorial plasma irregularities (EPIs). Shortly after the start of the storm main phase, EPIs appear in the post-sunset sector. As a response to a short-lived decline of E (sub m), EPI activity appears in the early morning sector. Following the second start of the main phase, EPIs are generated for a few hours in the late evening sector. However, for the rest of the storm main phase, no more EPIs are initiated for more than 12 hours. Only after the onset of recovery phase does EPI activity start again in the post-midnight sector, lasting more than 7 hours.This comprehensive view of ionospheric storm effects and plasma irregularities adds to our understanding of conditions that lead to ionospheric instabilities.

Ionospheric storm effects and equatorial plasma irregularities during the 17-18 March 2015 event

NASA Astrophysics Data System (ADS)

Zhou, Yun-Liang; Lühr, Hermann; Xiong, Chao; Pfaff, Robert F.

2016-09-01

The intense magnetic storm on 17-18 March 2015 caused large disturbances of the ionosphere. Based on the plasma density (Ni) observations performed by the Swarm fleet of satellites, the Gravity Recovery and Climate Experiment mission, and the Communications/Navigation Outage Forecasting System satellite, we characterize the storm-related perturbations at low latitudes. All these satellites sampled the ionosphere in morning and evening time sectors where large modifications occurred. Modifications of plasma density are closely related to changes of the solar wind merging electric field (Em). We consider two mechanisms, prompt penetration electric field (PPEF) and disturbance dynamo electric field (DDEF), as the main cause for the Ni redistribution, but effects of meridional wind are also taken into account. At the start of the storm main phase, the PPEF is enhancing plasma density on the dayside and reducing it on the nightside. Later, DDEF takes over and causes the opposite reaction. Unexpectedly, there appears during the recovery phase a strong density enhancement in the morning/prenoon sector and a severe Ni reduction in the afternoon/evening sector, and we suggest a combined effect of vertical plasma drift, and meridional wind is responsible for these ionospheric storm effects. Different from earlier studies about this storm, we also investigate the influence of storm dynamics on the initiation of equatorial plasma irregularities (EPIs). Shortly after the start of the storm main phase, EPIs appear in the postsunset sector. As a response to a short-lived decline of Em, EPI activity appears in the early morning sector. Following the second start of the main phase, EPIs are generated for a few hours in the late evening sector. However, for the rest of the storm main phase, no more EPIs are initiated for more than 12 h. Only after the onset of recovery phase does EPI activity start again in the postmidnight sector, lasting more than 7 h. This comprehensive view of ionospheric storm effects and plasma irregularities adds to our understanding of conditions that lead to ionospheric instabilities.

Two distinct phases of apoptosis in mammary gland involution: proteinase-independent and -dependent pathways

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lund, Leif R; Romer, John; Thomasset, Nicole

Postlactational involution of the mammary gland is characterized by two distinct physiological events: apoptosis of the secretory, epithelial cells undergoing programmed cell death, and proteolytic degradation of the mammary gland basement membrane. We examined the spatial and temporal patterns of apoptotic cells in relation to those of proteinases during involution of the BALB/c mouse mammary gland. Apoptosis was almost absent during lactation but became evident at day 2 of involution, when {beta}-casein gene expression was still high. Apoptotic cells were then seen at least up to day 8 of involution, when {beta}-casein gene expression was being extinguished. Expression of sulfatedmore » glycoprotein-2 (SGP-2), interleukin-1{beta} converting enzyme (ICE) and tissue inhibitor of metalloproteinases-1 was upregulated at day 2, when apoptotic cells were seen initially. Expression of the matrix metalloproteinases gelatinase A and stromelysin-1 and the serine proteinase urokinase-type plasminogen activator, which was low during lactation, was strongly upregulated in parallel starting at day 4 after weaning, coinciding with start of the collapse of the lobulo-alveolar structures and the intensive tissue remodeling in involution. The major sites of mRNA synthesis for these proteinases were fibroblast-like cells in the periductal stroma and stromal cells surrounding the collapsed alveoli, suggesting that the degradative phase of involution is due to a specialized mesenchymal-epithelial interaction. To elucidate the functional role of these proteinases during involution, at the onset of weaning we treated mice systemically with the glucocorticoid hydrocortisone, which is known to inhibit mammary gland involution. Although the initial wave of apoptotic cells appeared in the lumina of the gland, the dramatic regression and tissue remodeling usually evident by day 5 was substantially inhibited by systemic treatment with hydrocortisone. mRNA and protein for gelatinase A, stromelysin-1 and uPA were weakly induced, if at all, in hydrocortisonetreated mice. Furthermore, mRNA for membrane-type matrix metalloproteinase decreased after hydrocortisone treatment and paralleled the almost complete inhibition of activation of latent gelatinase A. Concomitantly, the gland filled with an overabundance of milk. Our data support the hypothesis that there are at least two distinct phases of involution: an initial phase, characterized by induction of the apoptosis-associated genes SGP-2 and ICE and apoptosis of fully differentiated mammary epithelial cells without visible degradation of the extracellular matrix, and a second phase, characterized by extracellular matrix remodeling and altered mesenchymal-epithelial interactions, followed by apoptosis of cells that are losing differentiated functions.« less

International collaborative research on infectious diseases by Japanese universities and institutes in Asia and Africa, with a special emphasis on J-GRID.

PubMed

Shinoda, Sumio; Imamura, Daisuke; Mizuno, Tamaki; Miyoshi, Shin-Ichi; Ramamurthy, Thandavrayan

2015-01-01

In developed countries including Japan, malignant tumor (cancer), heart disease and cerebral apoplexy are major causes of death, but infectious diseases are still responsible for a high number of deaths in developing countries, especially among children aged less than 5 years. World Health Statistics published by WHO reports a high percentage of mortality from infectious diseases in children, and many of these diseases may be subject to transmission across borders and could possibly invade Japan. 　Given this situation, the Ministry of Education, Culture, Sports, Science and Technology (MEXT) of Japan initiated Phase I of the Program of Founding Research Centers for Emerging and Reemerging Infectious Disease, which ran from FY 2005 to 2009, and involved 8 Japanese universities and 2 research centers. The program was established for the following purposes: 1) creation of a domestic research structure to promote the accumulation of fundamental knowledge about infectious diseases, 2) establishment of 13 overseas research collaboration centers in 8 countries at high risk of emerging and reemerging infections and at which Japanese researchers are stationed and conduct research in partnership with overseas instructors, 3) development of a network among domestic and overseas research centers, and 4) development of human resources. 　The program was controlled under MEXT and managed by the RIKEN Center of Research Network for Infectious Diseases (Riken CRNID). Phase II of the program was set up as the Japan Initiative for Global Research Network on Infectious Diseases (J-GRID), and has been running in FY 2010-2014. 　Phase III will start in April 2015, and will be organized by the newly established Japanese governmental organization "Japan Agency for Medical Research and Development (AMED)", the so-called Japanese style NIH. 　The Collaborative Research Center of Okayama University for Infectious Diseases in India (CRCOUI) was started up in 2007 at the National Institute of Cholera and Enteric Disease, Kolkata, India. Major projects of CRCOUI are concerned with diarrheal diseases such as, 1) active surveillance of diarrheal patients, 2) development of dysentery vaccines, 3) viable but nonculturable (VBNC) Vibrio cholerae, and 4) pathogenic mechanisms of various diarrhogenic microorganisms. 　This review article outlines project of J-GRID and CRCOUI which the authors carried out collaboratively with NICED staff members.

Attitudes towards insulin initiation in type 2 diabetes patients among healthcare providers: A survey research.

PubMed

Escalada, Javier; Orozco-Beltran, Domingo; Morillas, Carlos; Alvarez-Guisasola, Fernando; Gomez-Peralta, Fernando; Mata-Cases, Manel; Palomares, Rafael; Iglesias, Rosario; Carratalá-Munuera, Concepción

2016-12-01

To describe the views of healthcare providers about starting insulin in patients with type 2 diabetes and to determine the specific factors that contribute to delay insulin initiation. Two-phases observational descriptive study. In the quantitative phase we conducted a cross-sectional survey of a sample of 380 healthcare professionals (general practitioners (GPs), endocrinologists, internists and nurses). In the qualitative phase, a discussion group reviewed the results of the survey to propose solutions. In poorly controlled patients, 46% of GPs vs. 43.2% of internists and 31.3% of endocrinologists waited 3-6months before starting insulin, and 71.4% of GPs vs. 66.7% of internists vs. 58.8% of endocrinologists need to confirm twice the HbA1c levels. The upper level of basal glucose more frequently considered as good control is 130mg/dL for GPs (35.7%), and 120mg/dL for internists (35.8%) and endocrinologists (37.5%). In patients without comorbidities, 32.5% of endocrinologists vs. 27.2% of internists vs. 17.9% of GPs initiated insulin when HbA1c was >7% while 26.3% of endocrinologists vs. 28.4% of internists vs. 38.4% of GPs initiated insulin when HbA1c was >8%. The interference of the therapy with the patient' social life and the need for time management were the most accepted barriers to initiate insulin. There are significant differences between GPs and endocrinologists regarding the insulin initiation and GPs and internists felt less empowered to manage patients with diabetes. Specific training for professionals and joint work with patients could improve the glycemic control. Copyright © 2016 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Feasibility study of an optically coherent telescope array in space

NASA Technical Reports Server (NTRS)

Traub, W. A.

1983-01-01

Numerical methods of image construction which can be used to produce very high angular resolution images at optical wavelengths of astronomical objects from an orbiting array of telescopes are discussed and a concept is presented for a phase-coherent optical telescope array which may be deployed by space shuttle in the 1990's. The system would start as a four-element linear array with a 12 m baseline. The initial module is a minimum redundant array with a photon-counting collecting area three times larger than space telescope and a one dimensional resolution of better than 0.01 arc seconds in the visible range. Later additions to the array would build up facility capability. The advantages of a VLBI observatory in space are considered as well as apertures for the telescopes.

Investigating point zero: The artificial catchment 'Chicken Creek' as an observatory to study critical zone structures and processes of the critical zone in an initial ecosystem

NASA Astrophysics Data System (ADS)

Hüttl, Reinhard F.; Gerwin, Werner

2010-05-01

Recently, earth surface structures reaching from vegetation to the groundwater in the near underground have been termed "critical zone". This zone is "critical" to supporting life on Earth and, thus, the understanding of processes within this zone is of great importance in environmental sciences. Investigating the critical zone requires interdisciplinary and integrative research approaches across the fields of geomorphology, ecology, biology, soil science, hydrology and environmental modeling. A central motivation of the critical zone concept is the need for moving beyond traditional disciplinary boundaries to a more holistic and integrated study of the Earth surface system. However, the critical zone is characterized by complex interactions between abiotic and biotic structures and processes which need to be analyzed for improving our understanding of ecosystem functioning as well as of ecosystem development. To gain a better understanding of these fundamental questions it might be helpful to look at initial ecosystems, i.e. at ecosystems in the initial phase of development. It can be hypothesized that the complexity of a very young ecosystem is lower compared to mature systems and, therefore, structure-process interactions might become more obvious at early than at later stages of development. In this context, an artificial watershed was constructed with well known boundary conditions to investigate the initial ecosystem phase. The catchment ‘Chicken Creek' in Lusatia (Germany; 150 km SE from Berlin) has an area of 6 ha. It was set up with a layer of post-glacial sandy sediments overlying an aquiclude made of clay at the base. These hydrological starting conditions allowed for the formation of a groundwater body within the sandy layer of the experimental catchment. Further, after completion of the construction works in September 2005 the site was left to natural succession and no measures like planting or fertilization were carried out. As the initial phase of ecosystem development is highly dynamic under the prevailing climate conditions and ecosystem structures are formed and altered very rapidly the careful observation of the ongoing processes is essential. Thus, a comprehensive ecological monitoring programme has been started immediately after completion of the watershed to investigate the development and differentiation of structures and processes and their interactions. This paper highlights the conceptual approach of the project and particularly of the artificial watershed. Findings of this comprehensive project over a period of 4 years will be presented.

Treatment initiation, program attrition and patient treatment outcomes associated with scale-up and decentralization of HIV care in rural Malawi.

PubMed

McGuire, Megan; Pinoges, Loretxu; Kanapathipillai, Rupa; Munyenyembe, Tamika; Huckabee, Martha; Makombe, Simon; Szumilin, Elisabeth; Heinzelmann, Annette; Pujades-Rodríguez, Mar

2012-01-01

To describe patient antiretroviral therapy (cART) outcomes associated with intensive decentralization of services in a rural HIV program in Malawi. Longitudinal analysis of data from HIV-infected patients starting cART between August 2001 and December 2008 and of a cross-sectional immunovirological assessment conducted 12 (±2) months after therapy start. One-year mortality, lost to follow-up, and attrition (deaths and lost to follow-up) rates were estimated with exact Poisson 95% confidence intervals (CI) by type of care delivery and year of initiation. Association of virological suppression (<50 copies/mL) and immunological success (CD4 gain ≥100 cells/µL), with type of care was investigated using multiple logistic regression. During the study period, 4322 cART patients received centralized care and 11,090 decentralized care. At therapy start, patients treated in decentralized health facilities had higher median CD4 count levels (167 vs. 130 cell/µL, P<0.0001) than other patients. Two years after cART start, program attrition was lower in decentralized than centralized facilities (9.9 per 100 person-years, 95% CI: 9.5-10.4 vs. 20.8 per 100 person-years, 95% CI: 19.7-22.0). One year after treatment start, differences in immunological success (adjusted OR=1.23, 95% CI: 0.83-1.83), and viral suppression (adjusted OR=0.80, 95% CI: 0.56-1.14) between patients followed at centralized and decentralized facilities were not statistically significant. In rural Malawi, 1- and 2-year program attrition was lower in decentralized than in centralized health facilities and no statistically significant differences in one-year immunovirological outcomes were observed between the two health care levels. Longer follow-up is needed to confirm these results.

In situ neutron scattering study of nanoscale phase evolution in PbTe-PbS thermoelectric material

DOE PAGES

Ren, Fei; Schmidt, Robert; Keum, Jong K.; ...

2016-08-24

Introducing nanostructural second phases has been proved to be an effective approach to reduce the lattice thermal conductivity and thus enhance the figure of merit for many thermoelectric materials. Furthermore studies of the formation and evolution of these second phases are central to understanding temperature dependent material behavior, improving thermal stabilities, as well as designing new materials. We examined powder samples of PbTe-PbS thermoelectric material using in situ neutron diffraction and small angle neutron scattering (SANS) techniques from room temperature to elevated temperature up to 663 K, to explore quantitative information on the structure, weight fraction, and size of themore » second phase. Neutron diffraction data showed the as-milled powder was primarily solid solution before heat treatment. During heating, PbS second phase precipitated out of the PbTe matrix around 480 K, while re-dissolution started around 570 K. The second phase remained separated from the matrix upon cooling. Furthermore, SANS data indicated there are two populations of nanostructures. The size of the smaller nanostructure increased from initially 5 nm to approximately 25 nm after annealing at 650 K, while the size of the larger nanostructure remained unchanged. Our study demonstrated that in situ neutron techniques are effective means to obtain quantitative information to study temperature dependent nanostructural behavior of thermoelectrics and likely other high-temperature materials.« less

Boron-carbide-aluminum and boron-carbide-reactive metal cermets

DOEpatents

Halverson, Danny C.; Pyzik, Aleksander J.; Aksay, Ilhan A.

1986-01-01

Hard, tough, lightweight boron-carbide-reactive metal composites, particularly boron-carbide-aluminum composites, are produced. These composites have compositions with a plurality of phases. A method is provided, including the steps of wetting and reacting the starting materials, by which the microstructures in the resulting composites can be controllably selected. Starting compositions, reaction temperatures, reaction times, and reaction atmospheres are parameters for controlling the process and resulting compositions. The ceramic phases are homogeneously distributed in the metal phases and adhesive forces at ceramic-metal interfaces are maximized. An initial consolidation step is used to achieve fully dense composites. Microstructures of boron-carbide-aluminum cermets have been produced with modulus of rupture exceeding 110 ksi and fracture toughness exceeding 12 ksi.sqroot.in. These composites and methods can be used to form a variety of structural elements.

Boron-carbide-aluminum and boron-carbide-reactive metal cermets. [B/sub 4/C-Al

DOEpatents

Halverson, D.C.; Pyzik, A.J.; Aksay, I.A.

1985-05-06

Hard, tough, lighweight boron-carbide-reactive metal composites, particularly boron-carbide-aluminum composites, are produced. These composites have compositions with a plurality of phases. A method is provided, including the steps of wetting and reacting the starting materials, by which the microstructures in the resulting composites can be controllably selected. Starting compositions, reaction temperatures, reaction times, and reaction atmospheres are parameters for controlling the process and resulting compositions. The ceramic phases are homogeneously distributed in the metal phases and adhesive forces at ceramic-metal interfaces are maximized. An initial consolidated step is used to achieve fully dense composites. Microstructures of boron-carbide-aluminum cermets have been produced with modules of rupture exceeding 110 ksi and fracture toughness exceeding 12 ksi..sqrt..in. These composites and methods can be used to form a variety of structural elements.

Geometrical-Based Navigation System Performance Assessment in the Space Service Volume Using a Multiglobal Navigation Satellite System Methodology

NASA Technical Reports Server (NTRS)

Welch, Bryan W.

2016-01-01

NASA is participating in the International Committee on Global Navigation Satellite Systems (GNSS) (ICG)'s efforts towards demonstrating the benefits to the space user in the Space Service Volume (SSV) when a multi-GNSS solution space approach is utilized. The ICG Working Group: Enhancement of GNSS Performance, New Services and Capabilities has started a three phase analysis initiative as an outcome of recommendations at the ICG-10 meeting, in preparation for the ICG-11 meeting. The first phase of that increasing complexity and fidelity analysis initiative is based on a pure geometrically-derived access technique. The first phase of analysis has been completed, and the results are documented in this paper.

The Bridging Allowance as an Instrument of Labour Market Policy--A Provisional Appraisal. IAB Labour Market Research Topics No. 30.

ERIC Educational Resources Information Center

Wiessner, Frank

Since 1986 the Federal Employment Service in Germany has used the so-called "bridging allowance" to assist previously unemployed people in setting up their own businesses. This allowance is intended to guarantee the social security and subsistence of the person setting up the business during the start-up phase, until the young enterprise…

Enceladus: Starting Hydrothermal Activity

NASA Technical Reports Server (NTRS)

Matson, D. L.; Castillo-Rogez, J. C.; Johnson, T. V.; Lunine, J. I.; Davies, A. G.

2011-01-01

We describe a process for starting the hydrothermal activity in Enceladus' South Polar Region. The process takes advantage of fissures that reach the water table, about 1 kilometer below the surface. Filling these fissures with fresh ocean water initiates a flow of water up from an ocean that can be self-sustaining. In this hypothesis the heat to sustain the thermal anomalies and the plumes comes from a slightly warm ocean at depth. The heat is brought to the surface by water that circulates up, through the crust and then returns to the ocean.

Start-up capabilities of photovoltaic module for the International Space Station

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hajela, G.; Hague, L.

1997-12-31

The International Space Station (ISS) uses four photovoltaic modules (PVMs) to supply electric power for the US On-Orbit Segment (USOS). The ISS is assembled on orbit over a period of about 5 years and over 40 stages. PVMs are launched and integrated with the ISS at different times during the ISS assembly. During early stages, the electric power is provided by the integrated truss segment (ITS) P6; subsequently, ITS P4, S4, and S6 are launched. PVMs are launched into space in the National Space Transportation System (NSTS) cargo bay. Each PVM consists of two independent power channels. The NSTS docksmore » with the ISS, the PVM is removed from the cargo bay and installed on the ISS. At this stage the PVM is in stowed configuration and its batteries are in fully discharged state. The start-up consists of initialization and checkout of all hardware, deployment of SAW and photovoltaic radiator (PVR), thermal conditioning batteries, and charging batteries; not necessarily in the same order for all PVMs. PVMs are designed to be capable of on-orbit start-up, within a specified time period, when external power is applied to a specified electrical interface. This paper describes the essential steps required for PVM start-up and how these operations are performed for various PVMs. The integrated operations scenarios (IOS) prepared by the NASA, Johnson Space Center, details specific procedures and timelines for start-up of each PVM. The paper describes how dormant batteries are brought to their normal operating temperature range and then charged to 100% state of charge (SOC). Total time required to complete start-up is computed and compared to the IOS timelines. External power required during start-up is computed and compared to the requirements and/or available power on ISS. Also described is how these start-up procedures can be adopted for restart of PVMs when required.« less

Physics Bachelors: Initial Employment. Data from the Degree Recipient Follow-Up Survey for the Classes of 2013 and 2014. Focus On

ERIC Educational Resources Information Center

Mulvey, Patrick; Pold, Jack

2017-01-01

New physics bachelors entering the workforce receive some of the highest starting salaries of any undergraduate majors. Bachelors accepting STEM (science, technology, engineering, mathematics) positions in the private sector had a median starting salary of $55,000. Physics bachelors from 2013 and 2014 were contacted in the winter following the…

Learning from Sure Start: Working with Young Children and Their Families

ERIC Educational Resources Information Center

Weinberger, Jo, Ed.; Pickstone, Caroline, Ed.; Hannon, Peter, Ed.

2005-01-01

The book comes out of a University research project that has worked closely with one local programme over five years from its beginning. Sure Start is a national government initiative that targets families with children aged up to the age of four in areas of social and economic disadvantage, to promote development so children are ready to thrive…

Incredible Years Parent Training Support for Nursery Staff Working within a Disadvantaged Flying Start Area in Wales: A Feasibility Study

ERIC Educational Resources Information Center

Bywater, Tracey Jane; Hutchings, Judith Mary; Gridley, Nicole; Jones, Karen

2011-01-01

Parenting programmes are effective interventions for preventing and treating conduct problems in young children. Up to 20% of children in disadvantaged areas have conduct disorder. Recent government initiatives such as targeting early years services to designated disadvantaged Flying Start areas in Wales have resulted in increased nursery-care…

Quick-start of full-scale anaerobic digestion (AD) using aeration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lagerkvist, Anders, E-mail: al@ltu.se; Pelkonen, Markku; Wikström, Tommy

Highlights: • A fast, and original, start up procedure for anaerobic digestors has been applied at full scale. • The development of a methanogenic culture has been documented using fluorescent in situ hybridization. • The technique can be widely applied. - Abstract: A conventional 1300 m{sup 3} continuously stirred anaerobic tank reactor at the city of Boden, north Sweden, which was receiving a feed of both sewage sludge and food waste, was put out of operation due to the build-up of a float phase. The reactor was emptied and cleaned. At start-up there was no methanogenic sludge available, so anmore » unconventional start-up procedure was applied: The reactor was rapidly (8 days with 1200 kg of total solids (TS) added daily) filled with thickened, and slightly acidic sewage sludge, showing only slight methane generation, which was subsequently heated to 55 °C. Then compressed air was blown into the digester and within a month a fully functional methanogenic culture was established. The transfer from acidogenic to methanogenic conditions happened in about one week. As a start-up technique this is fast and cost efficient, it only requires the access of a compressor, electricity and a source of air. In total, about 16 tonnes of oxygen were used. It is proposed that this method may also be used as an operational amendment technique, should a reactor tend to acidify.« less

Lessons learned: design, start-up, and operation of cryogenic systems

NASA Astrophysics Data System (ADS)

Bell, W. M.; Bagley, R. E.; Motew, S.; Young, P.-W.

2014-11-01

Cryogenic systems involving a pumped cryogenic fluid, such as liquid nitrogen (LN2), require careful design since the cryogen is close to its boiling point and cold. At 1 atmosphere, LN2 boils at 77.4 K (-320.4 F). These systems, typically, are designed to transport the cryogen, use it for process heat removal, or for generation of gas (GN2) for process use. As the design progresses, it is important to consider all aspects of the design including, cryogen storage, pressure control and safety relief systems, thermodynamic conditions, equipment and instrument selection, materials, insulation, cooldown, pump start-up, maximum design and minimum flow rates, two phase flow conditions, heat flow, process control to meet and maintain operating conditions, piping integrity, piping loads on served equipment, warm-up, venting, and shut-down. "Cutting corners" in the design process can result in stalled start-ups, field rework, schedule hits, or operational restrictions. Some of these "lessoned learned" are described in this paper.

Anammox enrichment from reject water on blank biofilm carriers and carriers containing nitrifying biomass: operation of two moving bed biofilm reactors (MBBR).

PubMed

Zekker, Ivar; Rikmann, Ergo; Tenno, Toomas; Lemmiksoo, Vallo; Menert, Anne; Loorits, Liis; Vabamäe, Priit; Tomingas, Martin; Tenno, Taavo

2012-07-01

The anammox bacteria were enriched from reject water of anaerobic digestion of municipal wastewater sludge onto moving bed biofilm reactor (MBBR) system carriers-the ones initially containing no biomass (MBBR1) as well as the ones containing nitrifying biomass (MBBR2). Duration of start-up periods of the both reactors was similar (about 100 days), but stable total nitrogen (TN) removal efficiency occurred earlier in the system containing nitrifying biomass. Anammox TN removal efficiency of 70% was achieved by 180 days in both 20 l volume reactors at moderate temperature of 26.0°C. During the steady state phase of operation of MBBRs the average TN removal efficiencies and maximum TN removal rates in MBBR1 were 80% (1,000 g-N/m(3)/day, achieved by 308 days) and in MBBR2 85% (1,100 g-N/m(3)/day, achieved by 266 days). In both reactors mixed bacterial cultures were detected. Uncultured Planctomycetales bacterium clone P4, Candidatus Nitrospira defluvii and uncultured Nitrospira sp. clone 53 were identified by PCR-DGGE from the system initially containing blank biofilm carriers as well as from the nitrifying biofilm system; from the latter in addition to these also uncultured ammonium oxidizing bacterium clone W1 and Nitrospira sp. clone S1-62 were detected. FISH analysis revealed that anammox microorganisms were located in clusters in the biofilm. Using previously grown nitrifying biofilm matrix for anammox enrichment has some benefits over starting up the process from zero, such as less time for enrichment and protection against severe inhibitions in case of high substrate loading rates.

Loss to follow-up among children and adolescents growing up with HIV infection: age really matters.

PubMed

Kranzer, Katharina; Bradley, John; Musaazi, Joseph; Nyathi, Mary; Gunguwo, Hilary; Ndebele, Wedu; Dixon, Mark; Ndhlovu, Mbongeni; Rehman, Andrea; Khan, Palwasha; Vogt, Florian; Apollo, Tsitsi; Ferrand, Rashida Abbas

2017-07-17

Globally, increasing numbers of HIV-infected children are reaching adolescence due to antiretroviral therapy (ART). We investigated rates of loss-to-follow-up (LTFU) from HIV care services among children as they transition from childhood through adolescence. Individuals aged 5-19 years initiated on ART in a public-sector HIV clinic in Bulawayo, Zimbabwe, between 2005 and 2009 were included in a retrospective cohort study. Participants were categorized into narrow age-bands namely: 5-9 (children), 10-14 (young adolescents) and 15-19 (older adolescents). The effect of age at ART initiation, current age (using a time-updated Lexis expansion) and transitioning from one age group to the next on LTFU was estimated using Poisson regression. Of 2273 participants, 1013, 875 and 385 initiated ART aged 5-9, 10-14 and 15-19 years, respectively. Unlike those starting ART as children, individuals starting ART as young adolescents had higher LTFU rates after moving to the older adolescent age-band (Adjusted rate ratio (ARR) 1.54; 95% CI: 0.94-2.55) and similarly, older adolescents had higher LTFU rates after transitioning to being young adults (ARR 1.79; 95% CI: 1.05-3.07). In older adolescents, the LTFU rate among those who started ART in that age-band was higher compared to the rate among those starting ART at a younger age (ARR = 1.70; 95% CI: 1.05, 2.77). This however did not hold true for other age-groups. Adolescents had higher rates of LTFU compared to other age-groups, with older adolescents at particularly high risk in all analyses. Age-updated analyses that examine movement across narrow age-bands are paramount in understanding how developmental heterogeneity in children affects HIV outcomes.

Weight changes and their associations with demographic and clinical characteristics in risperidone maintenance treatment for schizophrenia.

PubMed

Xiang, Y-T; Wang, C-Y; Ungvari, G S; Kreyenbuhl, J A; Chiu, H F K; Lai, K Y C; Lee, E H M; Bo, Q-J; Dixon, L B

2011-06-01

This study aimed to characterize weight changes in schizophrenia patients taking risperidone as part of a randomized, controlled, open-label clinical trial. A total of 374 patients with schizophrenia who had been clinically stabilized following an acute episode were randomly assigned to a 'no-dose-reduction' group (initial optimal therapeutic doses continued throughout the study), a '4-week group' (initial optimal therapeutic doses continued for 4 weeks followed by a half dose reduction that was maintained until the end of the study) or a '26-week group' (initial optimal therapeutic doses continued for 26 weeks followed by a half dose reduction until the end of the study). Participants were assessed monthly using standardized assessment instruments during the first 6 months, and then every 2 months until the last recruited patient completed the 1-year follow-up. Weight gain was defined as gaining at least 7% of initial body weight, weight loss as losing at least 7% of initial body weight. A BMI <18.5 kg m⁻² was defined as underweight, 18.5-24.9 kg m⁻² as normal range, and ≥ 25 kg m⁻² as overweight or obese. At the end of follow-up, of the patients who started within the underweight range (n=22), 77.3% gained weight, whereas 4.5% lost weight. The corresponding figures were 39.6% and 4.8% in patients who started at normal weight (n=273), respectively, and 17.7% and 17.7% in patients who started at overweight (n=79), respectively. At the same time, 59.1% of the patients who started at underweight range went into the normal weight and 13.6% into the overweight/obese range, respectively, while 24.5% of those who started at normal weight went into the overweight/obese range, and 1.1% into underweight range, respectively; 20.3% of those who started at overweight range went into normal weight at the end of the follow-up. Multiple logistic regression analyses revealed that being underweight or normal weight at study entry predicted weight gain compared to being overweight, whereas being overweight at entry was associated with a higher likelihood of weight loss compared to being normal weight. No correlation was found between weight change and dose reduction. Weight change is a common, long-term, but heterogeneous side effect in risperidone maintenance treatment for stable schizophrenia patients. Special attention should be paid to fluctuations in weight that may occur throughout the course of treatment with risperidone. © Georg Thieme Verlag KG Stuttgart · New York.

Being fed up: a social cognitive neuroscience approach to mental satiation.

PubMed

Mojzisch, Andreas; Schulz-Hardt, Stefan

2007-11-01

Being fed up with something is a prevalent and fundamental human experience. Although the relevance of mental satiation, that is, the process of becoming fed up with an action, is highly acknowledged in organizational psychology, almost no empirical research has examined this concept. In this article, we take a social cognitive neuroscience approach to mental satiation. By building on and extending the classic work of Lewin and Karsten, we propose a new model of mental satiation that focuses on the cognitive, motivational, and neural processes underlying mental satiation. Our model starts with the assumption that repeated performance of an action undermines one's need for competence and hence leads to a loss of intrinsic motivation. We then distinguish between two phases of the satiation process: The first phase is characterized by a loss of intrinsic motivation to perform the action. The second phase starts when the intrinsic motivation has vanished and volitional control is required to continue the action. We predict that the loss of intrinsic motivation in the first phase of the satiation process is correlated with a decrease in activity in brain regions associated with positive hedonic experience, such as the nucleus accumbens, the ventral pallidum, and the medial orbitofrontal cortex. In contrast, the growing aversion toward the action during the second phase of the satiation process is predicted to be correlated with an increase in activity in brain regions associated with unpleasant affect and volitional control, such as the amygdala, the anterior insula, and the anterior cingulate cortex.

Entrepreneurship Education for a Sustainable Future

ERIC Educational Resources Information Center

Lindner, Johannes

2018-01-01

Entrepreneurs keep our economy and society vibrant by implementing new ideas, which is why our society needs people with entrepreneurship competences. The development of our entrepreneurship competences does not begin with the start of our professional lives, but is initiated in earlier phases of our socialisation. Entrepreneurship education can…

Preface Article for the Atmospheric Environment Special Issue on AQMEII Phase 2

EPA Science Inventory

Since its start in 2008, the Air Quality Model Evaluation International Initiative (AQMEII), coordinated by the European-Commission Joint Research Center (JRC) and the US-Environmental Protection Agency (EPA) has had as its primary goal the collaboration of the European and North...

Phase and Pupil Amplitude Recovery for JWST Space-Optics Control

NASA Technical Reports Server (NTRS)

Dean, B. H.; Zielinski, T. P.; Smith, J. S.; Bolcar, M. R.; Aronstein, D. L.; Fienup, J. R.

2010-01-01

This slide presentation reviews the phase and pupil amplitude recovery for the James Webb Space Telescope (JWST) Near Infrared Camera (NIRCam). It includes views of the Integrated Science Instrument Module (ISIM), the NIRCam, examples of Phase Retrieval Data, Ghost Irradiance, Pupil Amplitude Estimation, Amplitude Retrieval, Initial Plate Scale Estimation using the Modulation Transfer Function (MTF), Pupil Amplitude Estimation vs lambda, Pupil Amplitude Estimation vs. number of Images, Pupil Amplitude Estimation vs Rotation (clocking), and Typical Phase Retrieval Results Also included is information about the phase retrieval approach, Non-Linear Optimization (NLO) Optimized Diversity Functions, and Least Square Error vs. Starting Pupil Amplitude.

Design Features and Commissioning of the Versatile Experiment Spherical Torus (VEST) at Seoul National University

NASA Astrophysics Data System (ADS)

J. Chung, K.; H. An, Y.; K. Jung, B.; Y. Lee, H.; C., Sung; S. Na, Y.; S. Hahm, T.; S. Hwang, Y.

2013-03-01

A new spherical torus called VEST (Versatile Experiment Spherical Torus) is designed, constructed and successfully commissioned at Seoul National University. A unique design feature of the VEST is two partial solenoid coils installed at both vertical ends of a center stack, which can provide sufficient magnetic fluxes to initiate tokamak plasmas while keeping a low aspect ratio configuration in the central region. According to initial double null merging start-up scenario using the partial solenoid coils, appropriate power supplies for driving a toroidal field coil, outer poloidal field coils, and the partial solenoid coils are fabricated and successfully commissioned. For reliable start-up, a pre-ionization system with two cost-effective homemade magnetron power supplies is also prepared. In addition, magnetic and spectroscopic diagnostics with appropriate data acquisition and control systems are well prepared for initial operation of the device. The VEST is ready for tokamak plasma operation by completing and commissioning most of the designed components.

Growth and Mortality Outcomes for Different Antiretroviral Therapy Initiation Criteria in Children aged 1–5 Years: A Causal Modelling Analysis

PubMed Central

Schomaker, Michael; Davies, Mary-Ann; Malateste, Karen; Renner, Lorna; Sawry, Shobna; N’Gbeche, Sylvie; Technau, Karl-Günter; Eboua, François; Tanser, Frank; Sygnaté-Sy, Haby; Phiri, Sam; Amorissani-Folquet, Madeleine; Cox, Vivian; Koueta, Fla; Chimbete, Cleophas; Lawson-Evi, Annette; Giddy, Janet; Amani-Bosse, Clarisse; Wood, Robin; Egger, Matthias; Leroy, Valeriane

2017-01-01

Background There is limited evidence regarding the optimal timing of initiating antiretroviral therapy (ART) in children. We conducted a causal modelling analysis in children aged 1–5 years from the International Epidemiologic Databases to Evaluate AIDS West/Southern-Africa collaboration to determine growth and mortality differences related to different CD4-based treatment initiation criteria, age groups and regions. Methods ART-naïve children of age 12–59 months at enrollment with at least one visit before ART initiation and one follow-up visit were included. We estimated 3-year growth and cumulative mortality from the start of follow-up for different CD4 criteria using g-computation. Results About one quarter of the 5826 included children was from West Africa (24.6%). The median (first; third quartile) CD4% at the first visit was 16% (11%;23%), the median weight-for-age z-scores and height-for-age z-scores were −1.5 (−2.7; −0.6) and −2.5 (−3.5; −1.5), respectively. Estimated cumulative mortality was higher overall, and growth was slower, when initiating ART at lower CD4 thresholds. After 3 years of follow-up, the estimated mortality difference between starting ART routinely irrespective of CD4 count and starting ART if either CD4 count<750 cells/mm3 or CD4%<25% was 0.2% (95%CI: −0.2%;0.3%), and the difference in the mean height-for-age z-scores of those who survived was −0.02 (95%CI: −0.04;0.01). Younger children aged 1–2 and children in West Africa had worse outcomes. Conclusions Our results demonstrate that earlier treatment initiation yields overall better growth and mortality outcomes, though we could not show any differences in outcomes between immediate ART and delaying until CD4 count/% falls below750/25%. PMID:26479876

Viral Suppression and Retention in Care up to 5 Years after Initiation of Lifelong ART during Pregnancy (Option B+) in Rural Uganda

PubMed Central

Koss, Catherine A.; Natureeba, Paul; Kwarisiima, Dalsone; Ogena, Mike; Clark, Tamara D.; Olwoch, Peter; Cohan, Deborah; Okiring, Jaffer; Charlebois, Edwin D.; Kamya, Moses R.; Havlir, Diane V.

2016-01-01

Background Lifelong antiretroviral therapy (ART) is recommended for all HIV-infected pregnant women, but early studies suggest women often drop out of care postpartum and data are limited on virologic outcomes. Methods We evaluated viral suppression (primary outcome) and retention in care up to 5 years after ART initiation among HIV-infected women who started lifelong ART during pregnancy, irrespective of CD4 count, in a study in rural Uganda (NCT00993031). Participants were followed in the study for up to 1 year postpartum, then referred to clinics in surrounding communities. A random sample (N=200) was invited to participate in a cross-sectional follow-up study after completing the trial, involving one visit for a questionnaire and pregnancy and HIV RNA testing. Retention in care was defined as having attended an HIV clinic in the last 90 days. Logistic regression models were used to examine factors associated with viral suppression (HIV-1 RNA ≤400 copies/ml) at follow-up. Results One hundred fifty women (75%) were successfully contacted for follow-up at a median of 4.2 years after starting ART; 135 were retained in care (90%, 95% CI 84.0%–94.3%) and 121 demonstrated viral suppression (80.7%, 95% CI 73.4% –86.7%). Women who had disclosed their HIV status to their primary partner had greater odds of viral suppression (aOR 4.51, 95% CI 1.02–19.8). Conclusions High rates of viral suppression can be achieved up to 5 years after initiating ART during pregnancy among women retained in care. Interventions to facilitate disclosure may improve long-term outcomes among women who initiate ART during pregnancy under universal treatment. PMID:27828878

Scientific investigation in deep wells for nuclear waste disposal studies at the Meuse/Haute Marne underground research laboratory, Northeastern France

NASA Astrophysics Data System (ADS)

Delay, Jacques; Rebours, Hervé; Vinsot, Agnès; Robin, Pierre

Andra, the French National Radioactive Waste Management Agency, is constructing an underground test facility to study the feasibility of a radioactive waste disposal in the Jurassic-age Callovo-Oxfordian argillites. This paper describes the processes, the methods and results of a scientific characterization program carried out from the surface via deep boreholes with the aim to build a research facility for radioactive waste disposal. In particular this paper shows the evolution of the drilling programs and the borehole set up due to the refinement of the scientific objectives from 1994 to 2004. The pre-investigation phase on the Meuse/Haute-Marne site started in 1994. It consisted in drilling seven scientific boreholes. This phase, completed in 1996, led to the first regional geological cross-section showing the main geometrical characteristics of the host rock. Investigations on the laboratory site prior to the sinking of two shafts started in November 1999. The sinking of the shafts started in September 2000 with the auxiliary shaft completed in October 2004. The experimental gallery, at a depth of 445 m in the main shaft, was in operation by end 2004. During the construction of the laboratory, two major scientific programs were initiated to improve the existing knowledge of the regional hydrogeological characteristics and to accelerate the process of data acquisition on the shales. The aim of the 2003 hydrogeological drilling program was to determine, at regional scale, the properties of groundwater transport and to sample the water in the Oxfordian and Dogger limestones. The 2003-2004 programs consisted in drilling nine deep boreholes, four of which were slanted, to achieve an accurate definition of the structural features.

Areal Mass Oscillations in Planar Targets Due to Feedout: Theory and Simulations.

NASA Astrophysics Data System (ADS)

Velikovich, A. L.; Schmitt, A. J.; Karasik, M.; Obenschain, S. P.; Serlin, V.; Pawley, C. J.; Gardner, J. H.; Aglitskiy, Y.; Metzler, N.

2001-10-01

When a planar shock wave breaks out at a rippled rear surface of a laser-driven target, the lateral pressure gradient in a rippled rarefaction wave propagating back to the front surface causes a lateral mass redistribution that reverses the phase of mass variation. If the driving laser pulse has no foot, then the RT growth, starting when the rarefaction wave reaches the front surface, causes the second phase reversal of mass variation, and continues at the initial phase, as consistently observed in feedout experiments on Nike. A foot of the laser pulse can cause an early phase reversal of mass variation, making the strong shock wave driven by the main pulse interact with a density variation in a rippled rarefaction wave rather than with static rear surface ripples. Theory and simulations predict that this interaction can make the phase of mass variation reverse one or three times. Then the phase of the RT growing mode would be opposite to that of the initial mass variation.

An audit of growth hormone replacement for GH-deficient adults in Scotland.

PubMed

Philip, Sam; Howat, Isobel; Carson, Maggie; Booth, Anne; Campbell, Karen; Grant, Donna; Patterson, Catherine; Schofield, Christopher; Bevan, John; Patrick, Alan; Leese, Graham; Connell, John

2013-04-01

Guidelines on the clinical use of growth hormone therapy in adults were issued by the UK National Institute for Clinical Excellence (NICE) in August 2003. We conducted a retrospective clinical audit on the use of growth hormone (GH) in Scotland to evaluate the use of these guidelines and their impact on clinical practice. The audit had two phases. In phase I, the impact of NICE criteria on specialist endocrine practice in starting and continuing GH replacement was assessed. In phase II, the reasons why some adults in Scotland with growth hormone deficiency were not on replacement therapy were evaluated. A retrospective cross-sectional case note review was carried out of all adult patients being followed up for growth hormone deficiency during the study period (1 March 2005 to 31 March 2008). Phase I of the audit included 208 patients and phase II 108 patients. Sellar tumours were the main cause of GH deficiency in both phases of the audit. In phase I, 53 patients (77%) had an AGHDA-QoL score >11 documented before commencing GH post-NICE guidance, compared with 35 (25%) pre-NICE guidance. Overall, only 39 patients (18%) met the full NICE criteria for starting and continuing GH (pre-NICE, 11%; post-NICE, 35%). Phase II indicated that the main reasons for not starting GH included perceived satisfactory quality of life (n = 47, 43%), patient reluctance (16, 15%) or a medical contraindication (16, 15%). Although the use of quality of life assessments has increased following publication of the NICE guidelines, most adults on GH in Scotland did not fulfil the complete set of NICE criteria. The main reason for not starting GH therapy in adult GH-deficient patients was perceived satisfactory quality of life. © 2012 Blackwell Publishing Ltd.

Two-phase flow in the cooling circuit of a cryogenic rocket engine

NASA Astrophysics Data System (ADS)

Preclik, D.

1992-07-01

Transient two-phase flow was investigated for the hydrogen cooling circuit of the HM7 rocket engine. The nuclear reactor code ATHLET/THESEUS was adapted to cryogenics and applied to both principal and prototype experiments for validation and simulation purposes. The cooling circuit two-phase flow simulation focused on the hydrogen prechilling and pump transient phase prior to ignition. Both a single- and a multichannel model were designed and employed for a valve leakage flow, a nominal prechilling flow, and a prechilling with a subsequent pump-transient flow. The latter case was performed in order to evaluate the difference between a nominal and a delayed turbo-pump start-up. It was found that an extension of the nominal prechilling sequence in the order of 1 second is sufficient to finally provide for liquid injection conditions of hydrogen which, as commonly known, is undesirable for smooth ignition and engine starting transients.

The Effect of an Alternate Start Codon on Heterologous Expression of a PhoA Fusion Protein in Mycoplasma gallisepticum

PubMed Central

Panicker, Indu S.; Browning, Glenn F.; Markham, Philip F.

2015-01-01

While the genomes of many Mycoplasma species have been sequenced, there are no collated data on translational start codon usage, and the effects of alternate start codons on gene expression have not been studied. Analysis of the annotated genomes found that ATG was the most prevalent translational start codon among Mycoplasma spp. However in Mycoplasma gallisepticum a GTG start codon is commonly used in the vlhA multigene family, which encodes a highly abundant, phase variable lipoprotein adhesin. Therefore, the effect of this alternate start codon on expression of a reporter PhoA lipoprotein was examined in M. gallisepticum. Mutation of the start codon from ATG to GTG resulted in a 2.5 fold reduction in the level of transcription of the phoA reporter, but the level of PhoA activity in the transformants containing phoA with a GTG start codon was only 63% of that of the transformants with a phoA with an ATG start codon, suggesting that GTG was a more efficient translational initiation codon. The effect of swapping the translational start codon in phoA reporter gene expression was less in M. gallisepticum than has been seen previously in Escherichia coli or Bacillus subtilis, suggesting the process of translational initiation in mycoplasmas may have some significant differences from those used in other bacteria. This is the first study of translational start codon usage in mycoplasmas and the impact of the use of an alternate start codon on expression in these bacteria. PMID:26010086

Start-up and operation strategies on the liquefied food waste anaerobic digestion and a full-scale case application.

PubMed

Meng, Ying; Shen, Fei; Yuan, Hairong; Zou, Dexun; Liu, Yanping; Zhu, Baoning; Chufo, Akiber; Jaffar, Muhammad; Li, Xiujin

2014-11-01

Batch anaerobic digestion was employed to investigate the efficient start-up strategies for the liquefied food waste, and sequencing batch digestion was also performed to determine maximum influent organic loading rate (OLR) for efficient and stable operation. The results indicated that the start-up could be well improved using appropriate wastewater organic load and food-to-microorganism ratios (F/M). When digestion was initialized at low chemical oxygen demand (COD) concentration of 20.0 gCOD L(-1), the start-up would go well using lower F/M ratio of 0.5-0.7. The OLR 7.0 gCOD L(-1) day(-1) was recommended for operating the ASBR digestion, in which the COD conversion of 96.7 ± 0.53% and biomethane yield of 3.5 ± 0.2 L gCOD(-1) were achieved, respectively. The instability would occur when OLR was higher than 7.0 gCOD L(-1) day(-1), and this instability was not recoverable. Lipid was suggested to be removed before anaerobic digestion. The anaerobic digestion process in engineering project ran well, and good performance was achieved when the start-up and operational strategies from laboratory study were applied. For case application, stable digestion performance was achieved in a digester (850 m(3) volume) with biogas production of 1.0-3.8 m(3) m(-3) day(-1).

Manual wheelchair propulsion patterns on natural surfaces during start-up propulsion.

PubMed

Koontz, Alicia M; Roche, Bailey M; Collinger, Jennifer L; Cooper, Rory A; Boninger, Michael L

2009-11-01

To classify propulsion patterns over surfaces encountered in the natural environment during start-up and compare selected biomechanical variables between pattern types. Case series. National Veterans Wheelchair Games, Minneapolis, MN, 2005. Manual wheelchair users (N=29). Subjects pushed their wheelchairs from a resting position over high-pile carpet, over linoleum, and up a ramp with a 5 degrees incline while propulsion kinematics and kinetics were recorded with a motion capture system and an instrumented wheel. Three raters classified the first 3 strokes as 1 of 4 types on each surface: arc, semicircular (SC), single looping over propulsion (SL), and double looping over propulsion (DL). The Fisher exact test was used to assess pattern changes between strokes and surface type. A multiple analysis of variance test was used to compare peak and average resultant force and moment about the hub, average wheel velocity, stroke frequency, contact angle, and distance traveled between stroke patterns. SL was the most common pattern used during start-up propulsion (44.9%), followed by arc (35.9%), DL (14.1%), and SC (5.1%). Subjects who dropped their hands below the rim during recovery achieved faster velocities and covered greater distances (.016< or =P< or =.075) during start-up on linoleum and carpet and applied more force during start-up on the ramp compared with those who used an arc pattern (P=.066). Classifying propulsion patterns is a difficult task that should use multiple raters. In addition, propulsion patterns change during start-up, with an arc pattern most prevalent initially. The biomechanical findings in this study agree with current clinical guidelines that recommend training users to drop the hand below the pushrim during recovery.

Successful hydraulic strategies to start up OLAND sequencing batch reactors at lab scale.

PubMed

Schaubroeck, Thomas; Bagchi, Samik; De Clippeleir, Haydée; Carballa, Marta; Verstraete, Willy; Vlaeminck, Siegfried E

2012-05-01

Oxygen-limited autotrophic nitrification/denitrification (OLAND) is a one-stage combination of partial nitritation and anammox, which can have a challenging process start-up. In this study, start-up strategies were tested for sequencing batch reactors (SBR), varying hydraulic parameters, i.e. volumetric exchange ratio (VER) and feeding regime, and salinity. Two sequential tests with two parallel SBR were performed, and stable removal rates > 0.4 g N l(-1) day(-1) with minimal nitrite and nitrate accumulation were considered a successful start-up. SBR A and B were operated at 50% VER with 3 g NaCl l(-1) in the influent, and the influent was fed over 8% and 82% of the cycle time respectively. SBR B started up in 24 days, but SBR A achieved no start-up in 39 days. SBR C and D were fed over 65% of the cycle time at 25% VER, and salt was added only to the influent of SBR D (5 g NaCl l(-1)). Start-up of both SBR C and D was successful in 9 and 32 days respectively. Reactor D developed a higher proportion of small aggregates (0.10-0.25 mm), with a high nitritation to anammox rate ratio, likely the cause of the observed nitrite accumulation. The latter was overcome by temporarily including an anoxic period at the end of the reaction phase. All systems achieved granulation and similar biomass-specific nitrogen removal rates (141-220 mg N g(-1) VSS day(-1)). FISH revealed a close juxtapositioning of aerobic and anoxic ammonium-oxidizing bacteria (AerAOB and AnAOB), also in small aggregates. DGGE showed that AerAOB communities had a lower evenness than Planctomycetes communities. A higher richness of the latter seemed to be correlated with better reactor performance. Overall, the fast start-up of SBR B, C and D suggests that stable hydraulic conditions are beneficial for OLAND while increased salinity at the tested levels is not needed for good reactor performance. © 2012 The Authors. Microbial Biotechnology © 2012 Society for Applied Microbiology and Blackwell Publishing Ltd.

A structural topological optimization method for multi-displacement constraints and any initial topology configuration

NASA Astrophysics Data System (ADS)

Rong, J. H.; Yi, J. H.

2010-10-01

In density-based topological design, one expects that the final result consists of elements either black (solid material) or white (void), without any grey areas. Moreover, one also expects that the optimal topology can be obtained by starting from any initial topology configuration. An improved structural topological optimization method for multi- displacement constraints is proposed in this paper. In the proposed method, the whole optimization process is divided into two optimization adjustment phases and a phase transferring step. Firstly, an optimization model is built to deal with the varied displacement limits, design space adjustments, and reasonable relations between the element stiffness matrix and mass and its element topology variable. Secondly, a procedure is proposed to solve the optimization problem formulated in the first optimization adjustment phase, by starting with a small design space and advancing to a larger deign space. The design space adjustments are automatic when the design domain needs expansions, in which the convergence of the proposed method will not be affected. The final topology obtained by the proposed procedure in the first optimization phase, can approach to the vicinity of the optimum topology. Then, a heuristic algorithm is given to improve the efficiency and make the designed structural topology black/white in both the phase transferring step and the second optimization adjustment phase. And the optimum topology can finally be obtained by the second phase optimization adjustments. Two examples are presented to show that the topologies obtained by the proposed method are of very good 0/1 design distribution property, and the computational efficiency is enhanced by reducing the element number of the design structural finite model during two optimization adjustment phases. And the examples also show that this method is robust and practicable.

Philippines: World Oil Report 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khin, J.A.

1991-08-01

This paper reports on the discovery of a major oil field in the West Linapacan area, plus encouraging signs from the Calauit 1B, both offshore Palawan, that have prompted foreign and local firms to increase exploration activity, which should result in the drilling of 22 wells this year, compared to only seven during 1990. The West Linapacan well is reported to have potential recoverable reserves of 109 million bbl, and a consortium led by Alcorn (Production) Philippines plans a two-phase development of the discovery, beginning with two or three follow-up wells. These will be part of the seven additional wellsmore » the Office of Energy Affairs has approved for 1991 or early 1992. The OEA expects production from West Linapacan to start by 1992 at an initial rate of 15,000 to 20,000 bopd.« less

Opening the door to innovation.

PubMed

Schuurman, Janine; Graus, Yvo F; Labrijn, Aran F; Ruuls, Sigrid; Parren, Paul W H I

2014-01-01

Open innovation is the new buzz, with initiatives popping up left and right. Here, we give a personal perspective on a very successful, knowledge-driven innovation initiated in an academia- industry alliance, which culminated in technology platforms that enable the generation of therapeutic antibodies with novel properties. To start, we provide a general background on open innovation in the drug development field.

A review on the structural styles of deformation during Late Cretaceous and Paleocene tectonic phases in the southern North Sea area

NASA Astrophysics Data System (ADS)

Deckers, Jef; van der Voet, Eva

2018-04-01

The Mesozoic rifts in the southern North Sea area were affected by Late Cretaceous to Paleocene inversion. Two main inversion phases were traditionally identified in this interval: the Sub-Hercynian and the Laramide phases. The Sub-Hercynian phase started in the early Late Cretaceous, peaked during the Campanian and ended in the late Maastrichtian, while the Laramide phase started in the late Danian and ended in the Thanetian. The Late Cretaceous Sub-Hercynian phase was strong and occurred in several pulses. These pulses led to basin-scale uplift by large reverse movements along basin-bounding faults and resulted in large amounts of erosion (up to 2 km) of Mesozoic and older sediments. The middle Paleocene Laramide phase on the other hand resulted in mild, domal uplift of some Late Cretaceous inverted basins and subsidence (into depocenters) of others. The subsequent Cenozoic inversion phases displayed similar or lower amplitudes and wavelengths of vertical surface movements as the Laramide phase. The transition from the Sub-Hercynian to the Laramide phase in the southern North Sea area therefore coincides with the overall transition from fault-controlled inversion to broad domal vertical surface movements.

Resonance frequency control of RF normal conducting cavity using gradient estimator of reflected power

NASA Astrophysics Data System (ADS)

Leewe, R.; Shahriari, Z.; Moallem, M.

2017-10-01

Control of the natural resonance frequency of an RF cavity is essential for accelerator structures due to their high cavity sensitivity to internal and external vibrations and the dependency of resonant frequency on temperature changes. Due to the relatively high radio frequencies involved (MHz to GHz), direct measurement of the resonant frequency for real-time control is not possible by using conventional microcontroller hardware. So far, all operational cavities are tuned using phase comparison techniques. The temperature dependent phase measurements render this technique labor and time intensive. To eliminate the phase measurement, reduce man hours and speed up cavity start up time, this paper presents a control theme that relies solely on the reflected power measurement. The control algorithm for the nonlinear system is developed through Lyapunov's method. The controller stabilizes the resonance frequency of the cavity using a nonlinear control algorithm in combination with a gradient estimation method. Experimental results of the proposed system on a test cavity show that the resonance frequency can be tuned to its optimum operating point while the start up time of a single cavity and the accompanied man hours are significantly decreased. A test result of the fully commissioned control system on one of TRIUMF's DTL tanks verifies its performance under real environmental conditions.

Overview of KSTAR initial operation

NASA Astrophysics Data System (ADS)

Kwon, M.; Oh, Y. K.; Yang, H. L.; Na, H. K.; Kim, Y. S.; Kwak, J. G.; Kim, W. C.; Kim, J. Y.; Ahn, J. W.; Bae, Y. S.; Baek, S. H.; Bak, J. G.; Bang, E. N.; Chang, C. S.; Chang, D. H.; Chavdarovski, I.; Chen, Z. Y.; Cho, K. W.; Cho, M. H.; Choe, W.; Choi, J. H.; Chu, Y.; Chung, K. S.; Diamond, P.; Do, H. J.; Eidietis, N.; England, A. C.; Grisham, L.; Hahm, T. S.; Hahn, S. H.; Han, W. S.; Hatae, T.; Hillis, D.; Hong, J. S.; Hong, S. H.; Hong, S. R.; Humphrey, D.; Hwang, Y. S.; Hyatt, A.; In, Y. K.; Jackson, G. L.; Jang, Y. B.; Jeon, Y. M.; Jeong, J. I.; Jeong, N. Y.; Jeong, S. H.; Jhang, H. G.; Jin, J. K.; Joung, M.; Ju, J.; Kawahata, K.; Kim, C. H.; Kim, D. H.; Kim, Hee-Su; Kim, H. S.; Kim, H. K.; Kim, H. T.; Kim, J. H.; Kim, J. C.; Kim, Jong-Su; Kim, Jung-Su; Kim, Kyung-Min; Kim, K. M.; Kim, K. P.; Kim, M. K.; Kim, S. H.; Kim, S. S.; Kim, S. T.; Kim, S. W.; Kim, Y. J.; Kim, Y. K.; Kim, Y. O.; Ko, W. H.; Kogi, Y.; Kong, J. D.; Kubo, S.; Kumazawa, R.; Kwak, S. W.; Kwon, J. M.; Kwon, O. J.; LeConte, M.; Lee, D. G.; Lee, D. K.; Lee, D. R.; Lee, D. S.; Lee, H. J.; Lee, J. H.; Lee, K. D.; Lee, K. S.; Lee, S. G.; Lee, S. H.; Lee, S. I.; Lee, S. M.; Lee, T. G.; Lee, W. C.; Lee, W. L.; Leur, J.; Lim, D. S.; Lohr, J.; Mase, A.; Mueller, D.; Moon, K. M.; Mutoh, T.; Na, Y. S.; Nagayama, Y.; Nam, Y. U.; Namkung, W.; Oh, B. H.; Oh, S. G.; Oh, S. T.; Park, B. H.; Park, D. S.; Park, H.; Park, H. T.; Park, J. K.; Park, J. S.; Park, K. R.; Park, M. K.; Park, S. H.; Park, S. I.; Park, Y. M.; Park, Y. S.; Patterson, B.; Sabbagh, S.; Saito, K.; Sajjad, S.; Sakamoto, K.; Seo, D. C.; Seo, S. H.; Seol, J. C.; Shi, Y.; Song, N. H.; Sun, H. J.; Terzolo, L.; Walker, M.; Wang, S. J.; Watanabe, K.; Welander, A. S.; Woo, H. J.; Woo, I. S.; Yagi, M.; Yaowei, Y.; Yonekawa, Y.; Yoo, K. I.; Yoo, J. W.; Yoon, G. S.; Yoon, S. W.; KSTAR Team

2011-09-01

Since the successful first plasma generation in the middle of 2008, three experimental campaigns were successfully made for the KSTAR device, accompanied with a necessary upgrade in the power supply, heating, wall-conditioning and diagnostic systems. KSTAR was operated with the toroidal magnetic field up to 3.6 T and the circular and shaped plasmas with current up to 700 kA and pulse length of 7 s, have been achieved with limited capacity of PF magnet power supplies. The mission of the KSTAR experimental program is to achieve steady-state operations with high performance plasmas relevant to ITER and future reactors. The first phase (2008-2012) of operation of KSTAR is dedicated to the development of operational capabilities for a super-conducting device with relatively short pulse. Development of start-up scenario for a super-conducting tokamak and the understanding of magnetic field errors on start-up are one of the important issues to be resolved. Some specific operation techniques for a super-conducting device are also developed and tested. The second harmonic pre-ionization with 84 and 110 GHz gyrotrons is an example. Various parameters have been scanned to optimize the pre-ionization. Another example is the ICRF wall conditioning (ICWC), which was routinely applied during the shot to shot interval. The plasma operation window has been extended in terms of plasma beta and stability boundary. The achievement of high confinement mode was made in the last campaign with the first neutral beam injector and good wall conditioning. Plasma control has been applied in shape and position control and now a preliminary kinetic control scheme is being applied including plasma current and density. Advanced control schemes will be developed and tested in future operations including active profiles, heating and current drives and control coil-driven magnetic perturbation.

Converting MEMS technology into profits

NASA Astrophysics Data System (ADS)

Bryzek, Janusz

1998-08-01

This paper discusses issues related to transitioning a company from the advanced technology development phase (with a particular focus on MEMS) to a profitable business, with emphasis on start-up companies. It includes several case studies from (primarily) NovaSensor MEMS development history. These case studies illustrate strategic problems with which advanced MEMS technology developers have to be concerned. Conclusions from these case studies could be used as checkpoints for future MEMS developers to increase probability of profitable operations. The objective for this paper is to share the author's experience from multiple MEMS start-ups to accelerate development of the MEMS market by focusing state- of-the-art technologists on marketing issues.

Vapor Flow Patterns During a Start-Up Transient in Heat Pipes

NASA Technical Reports Server (NTRS)

Issacci, F.; Ghoniem, N, M.; Catton, I.

1996-01-01

The vapor flow patterns in heat pipes are examined during the start-up transient phase. The vapor core is modelled as a channel flow using a two dimensional compressible flow model. A nonlinear filtering technique is used as a post process to eliminate the non-physical oscillations of the flow variables. For high-input heat flux, multiple shock reflections are observed in the evaporation region. The reflections cause a reverse flow in the evaporation and circulations in the adiabatic region. Furthermore, each shock reflection causes a significant increase in the local pressure and a large pressure drop along the heat pipe.

Origin and control of instability in SCR/triac three-phase motor controllers

NASA Technical Reports Server (NTRS)

Dearth, J. J.

1982-01-01

The energy savings and reactive power reduction functions initiated by the power factor controller (PFC) are discussed. A three-phase PFC with soft start is examined analytically and experimentally to determine how well it controls the open loop instability and other possible modes of instability. The detailed mechanism of the open loop instability is determined and shown to impose design constraints on the closed loop system. The design is shown to meet those constraints.

Programming and execution of movement in Parkinson's disease.

PubMed

Sheridan, M R; Flowers, K A; Hurrell, J

1987-10-01

Programming and execution of arm movements in Parkinson's disease were investigated in choice and simple reaction time (RT) situations in which subjects made aimed movements at a target. A no-aiming condition was also studied. Reaction time was fractionated using surface EMG recording into premotor (central) and motor (peripheral) components. Premotor RT was found to be greater for parkinsonian patients than normal age-matched controls in the simple RT condition, but not in the choice condition. This effect did not depend on the parameters of the impending movement. Thus, paradoxically, parkinsonian patients were not inherently slower at initiating aiming movements from the starting position, but seemed unable to use advance information concerning motor task demands to speed up movement initiation. For both groups, low velocity movements took longer to initiate than high velocity ones. In the no-aiming condition parkinsonian RTs were markedly shorter than when aiming, but were still significantly longer than control RTs. Motor RT was constant across all conditions and was not different for patient and control subjects. In all conditions, parkinsonian movements were around 37% slower than control movements, and their movement times were more variable, the differences showing up early on in the movement, that is, during the initial ballistic phase. The within-subject variability of movement endpoints was also greater in patients. The motor dysfunction displayed in Parkinson's disease involves a number of components: (1) a basic central problem with simply initiating movements, even when minimal programming is required (no-aiming condition); (2) difficulty in maintaining computed forces for motor programs over time (simple RT condition); (3) a basic slowness of movement (bradykinesia) in all conditions; and (4) increased variability of movement in both time and space, presumably caused by inherent variability in force production.

Initiation of the Slow-Rise and Fast-Rise Phases of an Erupting Solar Filament by Localized Emerging Magnetic Field via Microflaring

NASA Technical Reports Server (NTRS)

Sterling, A. C.; Moore, R. L.; Harra, L. K.

2006-01-01

EUV data from EIT show that a filament of 2001 February 28 underwent a slow-rise phase lasting about 6 hrs, before rapidly erupting in a fast-rise phase. Concurrent images in soft X-rays (SXRs) from Yohkoh/SXT show that a series of three microflares, prominent in SXT images but weak in EIT approx.195 Ang EUV images, occurred near one end of the filament. The first and last microflares occurred respectively in conjunction with the start of the slow-rise phase and the start of the fast-rise phase, and the second microflare corresponded to a kink in the filament trajectory. Beginning within 10 hours of the start of the slow rise, new magnetic flux emerged at the location of the microflaring. This localized new flux emergence and the resulting microflares, consistent with reconnection between the emerging field and the sheared sigmoid core magnetic field holding the filament, apparently caused the slow rise of this field and the transition to explosive eruption. For the first time in such detail, the observations show this direct action of localized emerging flux in the progressive destabilization of a sheared core field in the onset of a coronal mass ejection (CME). Similar processes may have occurred in other recently-studied events, NASA supported this work through NASA SR&T and SEC GI grants.

Strategies for merging microbial fuel cell technologies in water desalination processes: Start-up protocol and desalination efficiency assessment

NASA Astrophysics Data System (ADS)

Borjas, Zulema; Esteve-Núñez, Abraham; Ortiz, Juan Manuel

2017-07-01

Microbial Desalination Cells constitute an innovative technology where microbial fuel cell and electrodialysis merge in the same device for obtaining fresh water from saline water with no energy-associated cost for the user. In this work, an anodic biofilm of the electroactive bacteria Geobacter sulfurreducens was able to efficiently convert the acetate present in synthetic waste water into electric current (j = 0.32 mA cm-2) able to desalinate water. .Moreover, we implemented an efficient start-up protocol where desalination up to 90% occurred in a desalination cycle (water production:0.308 L m-2 h-1, initial salinity: 9 mS cm-1, final salinity: <1 mS cm-1) using a filter press-based MDC prototype without any energy supply (excluding peristaltic pump energy). This start-up protocol is not only optimized for time but also simplifies operational procedures making it a more feasible strategy for future scaling-up of MDCs either as a single process or as a pre-treatment method combined with other well established desalination technologies such as reverse osmosis (RO) or reverse electrodialysis.

An experimental study of the biological effects of geomagnetic disturbances: The impact of a typical geomagnetic storm and its constituents on plants and animals

NASA Astrophysics Data System (ADS)

Krylov, Viacheslav V.; Zotov, Oleg D.; Klain, Boris I.; Ushakova, Natalia V.; Kantserova, Nadezhda P.; Znobisheva, Anna V.; Izyumov, Yuri G.; Kuz'mina, Victoria V.; Morozov, Alexey A.; Lysenko, Liudmila A.; Nemova, Nina N.; Osipova, Elena A.

2014-04-01

Naturally occurring geomagnetic storms have been shown to correlate with changes in organisms' biological processes. Changes in the geomagnetic field during a geomagnetic storm are complex and contain both slow changes of the geomagnetic field with frequencies of up to 0.001 Hz, and various geomagnetic pulsations observed in general to be within the range of 0.001-5 Hz. Little is known about what frequency constituent of geomagnetic storms has the strongest effect on living organisms. This paper uses an experimental approach to demonstrate that organisms from different taxa principally respond to slow changes of the geomagnetic field corresponding with the main phase and the initial period of the recovery phase of a geomagnetic storm. Pc1 type pulsations, which are commonly regarded as biologically effective elements of geomagnetic disturbances, did not affect controlled parameters in our experiments. This paper may serve as a starting point for a thorough inquiry into the influence of slow fluctuations of the geomagnetic field on organisms.

Pressure-induced phase transition in GaN nanocrystals

NASA Astrophysics Data System (ADS)

Cui, Q.; Pan, Y.; Zhang, W.; Wang, X.; Zhang, J.; Cui, T.; Xie, Y.; Liu, J.; Zou, G.

2002-11-01

High-pressure in situ energy-dispersive x-ray diffraction experiments on GaN nanocrystals with 50 nm diameter have been carried out using a synchrotron x-ray source and a diamond-anvil cell up to about 79 GPa at room temperature. A pressure-induced first-order structural phase transition from the wurtzite-type structure to the rock-salt-type structure starts at about 48.8 GPa. The rock-salt-type phase persists to the highest pressure in our experimental range.

In situ neutron scattering study of nanoscale phase evolution in PbTe-PbS thermoelectric material

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ren, Fei, E-mail: renfei@temple.edu, E-mail: kean@ornl.gov; Qian, Bosen; Schmidt, Robert

2016-08-22

Introducing nanostructural second phases has proved to be an effective approach to reduce the lattice thermal conductivity and thus enhances the figure of merit for many thermoelectric materials. Studies of the formation and evolution of these second phases are essential to understanding material temperature dependent behaviors, improving thermal stabilities, as well as designing new materials. In this study, powder samples of the PbTe-PbS thermoelectric material were examined using in situ neutron diffraction and small angle neutron scattering (SANS) techniques between room temperature and elevated temperature up to 663 K, to explore quantitative information on the structure, weight fraction, and size ofmore » the second phase. Neutron diffraction data showed that the as-milled powder was primarily a solid solution prior to heat treatment. During heating, a PbS second phase precipitated out of the PbTe matrix around 500 K, while re-dissolution started around 600 K. The second phase remained separated from the matrix upon cooling. Furthermore, SANS data indicated that there are two populations of nanostructures. The size of the smaller nanostructure increased from initially 5 nm to approximately 25 nm after annealing at 650 K, while the size of the larger one remained unchanged. This study demonstrated that in situ neutron techniques are effective means to obtain quantitative information on temperature-dependent nanostructural behavior of thermoelectrics and likely other high-temperature materials.« less

Recovery of Mycobacterium lentiflavum from bronchial lavage during follow-up of an extrapulmonary tuberculosis patient.

PubMed

Vise, Esther; Mawlong, Michael; Garg, Akshay; Sen, Arnab; Shakuntala, Ingudam; Das, Samir

2017-01-01

Initially diagnosed with cervical lymphadenitis, a 15-year-old boy was started with category I anti-tuberculosis (TB) drugs. Follow-up investigations led to isolation and identification of Mycobacterium lentiflavum by multiple diagnostic and identification approaches. Observation of this rare pathogen from human origin urges cautious diagnosis while attending TB cases.

Comprehensive transcriptome analysis unravels the existence of crucial genes regulating primary metabolism during adventitious root formation in Petunia hybrida.

PubMed

Ahkami, Amirhossein; Scholz, Uwe; Steuernagel, Burkhard; Strickert, Marc; Haensch, Klaus-Thomas; Druege, Uwe; Reinhardt, Didier; Nouri, Eva; von Wirén, Nicolaus; Franken, Philipp; Hajirezaei, Mohammad-Reza

2014-01-01

To identify specific genes determining the initiation and formation of adventitious roots (AR), a microarray-based transcriptome analysis in the stem base of the cuttings of Petunia hybrida (line W115) was conducted. A microarray carrying 24,816 unique, non-redundant annotated sequences was hybridized to probes derived from different stages of AR formation. After exclusion of wound-responsive and root-regulated genes, 1,354 of them were identified which were significantly and specifically induced during various phases of AR formation. Based on a recent physiological model distinguishing three metabolic phases in AR formation, the present paper focuses on the response of genes related to particular metabolic pathways. Key genes involved in primary carbohydrate metabolism such as those mediating apoplastic sucrose unloading were induced at the early sink establishment phase of AR formation. Transcriptome changes also pointed to a possible role of trehalose metabolism and SnRK1 (sucrose non-fermenting 1- related protein kinase) in sugar sensing during this early step of AR formation. Symplastic sucrose unloading and nucleotide biosynthesis were the major processes induced during the later recovery and maintenance phases. Moreover, transcripts involved in peroxisomal beta-oxidation were up-regulated during different phases of AR formation. In addition to metabolic pathways, the analysis revealed the activation of cell division at the two later phases and in particular the induction of G1-specific genes in the maintenance phase. Furthermore, results point towards a specific demand for certain mineral nutrients starting in the recovery phase.

Comprehensive Transcriptome Analysis Unravels the Existence of Crucial Genes Regulating Primary Metabolism during Adventitious Root Formation in Petunia hybrida

PubMed Central

Ahkami, Amirhossein; Scholz, Uwe; Steuernagel, Burkhard; Strickert, Marc; Haensch, Klaus-Thomas; Druege, Uwe; Reinhardt, Didier; Nouri, Eva; von Wirén, Nicolaus; Franken, Philipp; Hajirezaei, Mohammad-Reza

2014-01-01

To identify specific genes determining the initiation and formation of adventitious roots (AR), a microarray-based transcriptome analysis in the stem base of the cuttings of Petunia hybrida (line W115) was conducted. A microarray carrying 24,816 unique, non-redundant annotated sequences was hybridized to probes derived from different stages of AR formation. After exclusion of wound-responsive and root-regulated genes, 1,354 of them were identified which were significantly and specifically induced during various phases of AR formation. Based on a recent physiological model distinguishing three metabolic phases in AR formation, the present paper focuses on the response of genes related to particular metabolic pathways. Key genes involved in primary carbohydrate metabolism such as those mediating apoplastic sucrose unloading were induced at the early sink establishment phase of AR formation. Transcriptome changes also pointed to a possible role of trehalose metabolism and SnRK1 (sucrose non-fermenting 1- related protein kinase) in sugar sensing during this early step of AR formation. Symplastic sucrose unloading and nucleotide biosynthesis were the major processes induced during the later recovery and maintenance phases. Moreover, transcripts involved in peroxisomal beta-oxidation were up-regulated during different phases of AR formation. In addition to metabolic pathways, the analysis revealed the activation of cell division at the two later phases and in particular the induction of G1-specific genes in the maintenance phase. Furthermore, results point towards a specific demand for certain mineral nutrients starting in the recovery phase. PMID:24978694

Iterative projection algorithms for ab initio phasing in virus crystallography.

PubMed

Lo, Victor L; Kingston, Richard L; Millane, Rick P

2016-12-01

Iterative projection algorithms are proposed as a tool for ab initio phasing in virus crystallography. The good global convergence properties of these algorithms, coupled with the spherical shape and high structural redundancy of icosahedral viruses, allows high resolution phases to be determined with no initial phase information. This approach is demonstrated by determining the electron density of a virus crystal with 5-fold non-crystallographic symmetry, starting with only a spherical shell envelope. The electron density obtained is sufficiently accurate for model building. The results indicate that iterative projection algorithms should be routinely applicable in virus crystallography, without the need for ancillary phase information. Copyright © 2016 Elsevier Inc. All rights reserved.

Phase portraits analysis of a barothropic system: The initial value problem

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuetche, Victor Kamgang, E-mail: vkuetche@yahoo.fr; Department of Physics, Faculty of Science, University of Yaounde I, P.O. Box 812, Yaounde; The Abdus Salam International Center for Theoretical Physics, Strada Costiera 11, 34014 Trieste

2014-05-15

In this paper, we investigate the phase portraits features of a barothropic relaxing medium under pressure perturbations. In the starting point, we show within a third-order of accuracy that the previous system is modeled by a “dissipative” cubic nonlinear evolution equation. Paying particular attention to high-frequency perturbations of the system, we solve the initial value problem of the system both analytically and numerically while unveiling the existence of localized multivalued waveguide channels. Accordingly, we find that the “dissipative” term with a “dissipative” parameter less than some limit value does not destroy the ambiguous solutions. We address some physical implications ofmore » the results obtained previously.« less

Foundations as Promoters of Life Science Start-ups.

PubMed

Vonmont, Pascale

2014-12-01

Because private foundations have only modest financial resources compared to public and private-sector research funding, the only way in which foundations can play a key role is in the initial and risk financing of gap areas. This is generally in what is known as the 'valley of death', but even there an additional focus is needed. One promising field is the very early-stage support for high-risk but high-potential business cases in order to increase the number of start-ups, not only but very often in the field of life sciences. The pre-seed fund venture kick, an initiative by private foundations, is a good example of success. There is still a gap in the innovation chain in Switzerland from the first research results to becoming a successful life science company. However, for the first time promising solutions are on the way, and here too, foundations can play an important role.

Effects of Antiretroviral Therapy and Depressive Symptoms on All-Cause Mortality Among HIV-Infected Women

PubMed Central

Todd, Jonathan V.; Cole, Stephen R.; Pence, Brian W.; Lesko, Catherine R.; Bacchetti, Peter; Cohen, Mardge H.; Feaster, Daniel J.; Gange, Stephen; Griswold, Michael E.; Mack, Wendy; Rubtsova, Anna; Wang, Cuiwei; Weedon, Jeremy; Anastos, Kathryn; Adimora, Adaora A.

2017-01-01

Abstract Depression affects up to 30% of human immunodeficiency virus (HIV)-infected individuals. We estimated joint effects of antiretroviral therapy (ART) initiation and depressive symptoms on time to death using a joint marginal structural model and data from a cohort of HIV-infected women from the Women's Interagency HIV Study (conducted in the United States) from 1998–2011. Among 848 women contributing 6,721 years of follow-up, 194 participants died during follow-up, resulting in a crude mortality rate of 2.9 per 100 women-years. Cumulative mortality curves indicated greatest mortality for women who reported depressive symptoms and had not initiated ART. The hazard ratio for depressive symptoms was 3.38 (95% confidence interval (CI): 2.15, 5.33) and for ART was 0.47 (95% CI: 0.31, 0.70). Using a reference category of women without depressive symptoms who had initiated ART, the hazard ratio for women with depressive symptoms who had initiated ART was 3.60 (95% CI: 2.02, 6.43). For women without depressive symptoms who had not started ART, the hazard ratio was 2.36 (95% CI: 1.16, 4.81). Among women reporting depressive symptoms who had not started ART, the hazard ratio was 7.47 (95% CI: 3.91, 14.3). We found a protective effect of ART initiation on mortality, as well as a harmful effect of depressive symptoms, in a cohort of HIV-infected women. PMID:28430844

A semikinetic model for early stage plasmasphere refilling. I - Effects of Coulomb collisions

NASA Technical Reports Server (NTRS)

Wilson, G. R.; Horwitz, J. L.; Lin, J.

1992-01-01

A collisionless, time-dependent, kinetic plasma model is applied to the problem of baseline plasmasphere refilling of an initially depleted flux tube, without regard for the effects of wave-particle interactions. Refilling calculations for various flux tubes and for different ionospheric plasma fluxes and temperatures are performed. In each case considered, the same set of events occurs. Initially, two polar wind outflows develop from each hemisphere and set up counterstreaming beams. With time the vacant phase space region between these beams fills, primarily because of collision-induced particle diffusion but also because of lowering ambipolar potential drops from the increasing density in the plasmasphere. In contrast to all previous hydrodynamic approaches, no formation of shocks was found. The plasma first evolves an isotropic, nearly Maxwellian velocity distribution in a region that starts near the ionosphere and moves outward toward the equator. For reasonable topside ionospheric temperatures and fluxes, the thermal plasma all along an L shell is found to become nearly isotropic in 6 to 30 hr, consistent with the observations of Horwitz et al. (1984).

Treatment Initiation, Program Attrition and Patient Treatment Outcomes Associated with Scale-Up and Decentralization of HIV Care in Rural Malawi

PubMed Central

McGuire, Megan; Pinoges, Loretxu; Kanapathipillai, Rupa; Munyenyembe, Tamika; Huckabee, Martha; Makombe, Simon; Szumilin, Elisabeth; Heinzelmann, Annette; Pujades-Rodríguez, Mar

2012-01-01

Objective To describe patient antiretroviral therapy (cART) outcomes associated with intensive decentralization of services in a rural HIV program in Malawi. Methods Longitudinal analysis of data from HIV-infected patients starting cART between August 2001 and December 2008 and of a cross-sectional immunovirological assessment conducted 12 (±2) months after therapy start. One-year mortality, lost to follow-up, and attrition (deaths and lost to follow-up) rates were estimated with exact Poisson 95% confidence intervals (CI) by type of care delivery and year of initiation. Association of virological suppression (<50 copies/mL) and immunological success (CD4 gain ≥100 cells/µL), with type of care was investigated using multiple logistic regression. Results During the study period, 4322 cART patients received centralized care and 11,090 decentralized care. At therapy start, patients treated in decentralized health facilities had higher median CD4 count levels (167 vs. 130 cell/µL, P<0.0001) than other patients. Two years after cART start, program attrition was lower in decentralized than centralized facilities (9.9 per 100 person-years, 95% CI: 9.5–10.4 vs. 20.8 per 100 person-years, 95% CI: 19.7–22.0). One year after treatment start, differences in immunological success (adjusted OR = 1.23, 95% CI: 0.83–1.83), and viral suppression (adjusted OR = 0.80, 95% CI: 0.56–1.14) between patients followed at centralized and decentralized facilities were not statistically significant. Conclusions In rural Malawi, 1- and 2-year program attrition was lower in decentralized than in centralized health facilities and no statistically significant differences in one-year immunovirological outcomes were observed between the two health care levels. Longer follow-up is needed to confirm these results. PMID:23077473

Dietary Vitamin K intake and anticoagulation control during the initiation phase of warfarin therapy: A prospective cohort study

USDA-ARS?s Scientific Manuscript database

The effect of varying levels of dietary vitamin K intake on therapeutic International Normalized Ratio (INR) values among patients starting warfarin therapy has not been well studied. We performed a prospective cohort study among 282 patients to explore the independent associations between usual in...

National Program for e-Learning in Taiwan

ERIC Educational Resources Information Center

Chang, Maiga; Wang, Chin-Yeh; Chen, Gwo-Dong

2009-01-01

Taiwan government has initiated a five-year program since 2002: the National Science and Technology Program for e-Learning. The national program started from 2003 and was completed at the end of year 2007, involving thirteen government agencies. This paper describes the results that the national program has accomplished at its first phase, 2003 to…

One Environmental Education Center's Industry Initiative: Collaborating to Create More Environmentally and Economically Sustainable Businesses

ERIC Educational Resources Information Center

Hollweg, Karen S.

2009-01-01

The Centre for Environment Education (CEE) added an Industry Initiative to its portfolio of more traditional environmental education programs in 1993. This article documents the start-up and evolution of that program and the ways that businesses and CEE have worked together for a sustainable future. A specific 18-month project, in which CEE and an…

Aerobic composting of distilled grain waste eluted from a Chinese spirit-making process: The effects of initial pH adjustment.

PubMed

Wang, Shi-Peng; Zhong, Xiao-Zhong; Wang, Ting-Ting; Sun, Zhao-Yong; Tang, Yue-Qin; Kida, Kenji

2017-12-01

Aerobic composting of distilled grain waste (DGW) at different initial pH values adjusted by CaO addition was investigated. Three pH-adjusted treatments with initial pH values of 4 (R1), 5 (R2) and 6 (R3) and a control treatment (R0) with a pH value of 3.5 were conducted simultaneously. The results showed that R0 had an unsuccessful start-up of composting. However, the pH-adjusted treatments produced remarkable results, with a relatively high initial pH being beneficial for the start-up. Within 65days of composting, the degradation of volatile solids (VS) and the physicochemical properties of R2 and R3 displayed similar tendencies, and both produced a mature end-product, while R1 exhibited a lower VS degradation rate, and some of its physicochemical properties indicated the end-product was immature. Quantitative PCR analysis of ammonia oxidizers indicated that the occurrence of nitrification during the composting of DGW could be attributed to the activity of ammonia-oxidizing bacteria. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effect of Co Addition on the Microstructure, Martensitic Transformation and Shape Memory Behavior of Fe-Mn-Si Alloys

NASA Astrophysics Data System (ADS)

Maji, Bikas C.; Krishnan, Madangopal; Sujata, M.; Gouthama; Ray, Ranjit K.

2013-01-01

The effect of Co addition has been studied in Fe-30Mn-6Si- xCo ( x = 0 to 9 wt pct) shape memory alloys in terms of their microstructure, martensitic transformation and shape recovery. Microstructural investigations reveal that in Fe-Mn-Si-Co alloys, the microstructure remains single-phase austenite (γ) up to 5 pct Co and beyond that becomes two-phase comprising γ and off-stoichiometric (Fe,Co)5Mn3Si2 intermetallic π-phases. The forward γ-ɛ martensite transformation start temperature ( M S) decreases with the addition of Co up to 5 pct, and alloys containing more than 5 pct Co, show slightly higher M S possibly on account of two-phase microstructure. Unlike M S, the ɛ-γ reverse transformation start temperature ( A S) has been found to remain almost unaltered by Co addition. In general, addition of Co to Fe-Mn-Si alloys deteriorates shape recovery due to decreasing resistance to plastic yielding concomitant with the formation of stress induced ɛ martensite. However, there is an improvement in shape recovery beyond 5 pct Co addition, possibly due to the strengthening effect arising from the presence of (Fe,Co)5Mn3Si2 precipitates within the two-phase microstructure and due to higher amount of stress induced ɛ martensite.

Critical Incidents Typically Emerging during the Post-Formation Phase of a New Venture: Perspectives for Entrepreneurship Education and Start-up Counselling

ERIC Educational Resources Information Center

Heinrichs, Karin; Jäcklin, Benjamin

2017-01-01

During the post-formation phase, young ventures are often in danger of sliding into bankruptcy. The entrepreneur has to deal with a multitude of complex problems, decisions have to be made under time pressure or uncertainty, and upcoming crises have to be perceived in time. This paper presents seven critical incidents that are (1) realistic,…

Passive Wake Detection Using Seal Whisker-Inspired Sensing

DTIC Science & Technology

2015-02-01

2sA!2 (1.12) C l,v : The lift coecient in phase with velocity is a particularly important variable in this context. It describes the energy transfer ...start-up phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 2-10 C m contours plotted as a function of amplitude ratio and...minimize drag. The tube on top attaches directly to the front of the Tow Tank carriage. . . . . . . . . . . . . . 174 C-2 (Left) Accelerometer held in

Plasma current start-up by the outer ohmic heating coils in the Saskatchewan TORus Modified (STOR-M) iron core tokamak

DOE PAGES

Mitarai, O.; Xiao, C.; McColl, D.; ...

2015-03-24

A plasma current up to 15 kA has been driven with outer ohmic heating (OH) coils in the STOR-M iron core tokamak. Even when the inner OH coil is disconnected, the outer OH coils alone can induce the plasma current as primary windings and initial breakdown are even easier in this coil layout. Our results suggest a possibility to use an iron core in a spherical tokamak to start up the plasma current without a central solenoid. Finally, the effect of the iron core saturation on the extension of the discharge pulse length has been estimated for further experiments inmore » the STOR-M tokamak.« less

Plasma current start-up by the outer ohmic heating coils in the Saskatchewan TORus Modified (STOR-M) iron core tokamak

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mitarai, O.; Xiao, C.; McColl, D.

A plasma current up to 15 kA has been driven with outer ohmic heating (OH) coils in the STOR-M iron core tokamak. Even when the inner OH coil is disconnected, the outer OH coils alone can induce the plasma current as primary windings and initial breakdown are even easier in this coil layout. Our results suggest a possibility to use an iron core in a spherical tokamak to start up the plasma current without a central solenoid. Finally, the effect of the iron core saturation on the extension of the discharge pulse length has been estimated for further experiments inmore » the STOR-M tokamak.« less

Background compensation for a radiation level monitor

DOEpatents

Keefe, D.J.

1975-12-01

Background compensation in a device such as a hand and foot monitor is provided by digital means using a scaler. With no radiation level test initiated, a scaler is down-counted from zero according to the background measured. With a radiation level test initiated, the scaler is up-counted from the previous down-count position according to the radiation emitted from the monitored object and an alarm is generated if, with the scaler having crossed zero in the positive going direction, a particular number is exceeded in a specific time period after initiation of the test. If the test is initiated while the scale is down-counting, the background count from the previous down- count stored in a memory is used as the initial starting point for the up-count.

Sound quality characteristics of refrigerator noise in real living environments with relation to psychoacoustical and autocorrelation function parameters.

PubMed

Sato, Shin-ichi; You, Jin; Jeon, Jin Yong

2007-07-01

Psychoacoustical and autocorrelation function (ACF) parameters were employed to describe the temporal fluctuations of refrigerator noise during starting, transition into/from the stationary phase and termination of operation. The temporal fluctuations of refrigerator noise include a click at start-up, followed by a rapid increase in volume, a change of pitch, and termination of the operation. Subjective evaluations of the noise of 24 different refrigerators were conducted in a real living environment. The relationship between objective measures and perceived noisiness was examined by multiple regression analysis. Sound quality indices were developed based on psychoacoustical and ACF parameters. The psychoacoustical parameters found to be important for evaluating noisiness in the stationary phase were loudness and roughness. The relationship between noisiness and ACF parameters shows that sound energy and its fluctuations are important for evaluating noisiness. Also, refrigerator sounds that had a fluctuation of pitch were rated as more annoying. The tolerance level for the starting phase of refrigerator noise was found to be 33 dBA, which is the level where 65% of the participants in the subjective tests were satisfied.

Improvements to CHI Plasma Start-up and Ramp-up in NSTX

NASA Astrophysics Data System (ADS)

Jarboe, T. R.; Raman, R.; Nelson, B. A.; Mueller, D.; Bell, M. G.; Roquemore, L.; Kugel, H. W.; Soukhanovskii, V.

2009-11-01

Experiments in NSTX have now demonstrated the savings of central solenoid inductive flux after coupling of toroidal plasmas produced by the technique of Coaxial Helicity Injection (CHI) to inductive sustainment and ramp-up of the toroidal plasma current. In these discharges, the central solenoid with zero pre-charge was used to apply an inductive loop voltage to the decaying CHI started discharges. The coupled discharges ramped up to 800kA without the benefit of auxiliary heating. Inductive flux savings was realized as a result of an effort to reduce the influx of low-Z impurities during the plasma start-up phase. This was achieved through the use of 400ms long CHI discharges produced using a DC rectifier power supply to ablate low-Z surface impurities from the lower divertor electrodes, followed by the use of Lithium evaporative coatings and an effort to reduce spurious arcs in the upper divertor region by controlling the extent of CHI plasma growth in the vessel. Previous work on NSTX has shown that CHI started discharges after coupling to neutral beam heated discharges can transition to an H-mode. These important new results from NSTX demonstrate that CHI is a viable solenoid-free plasma startup method for future STs and Tokamaks. This work supported by U.S. DOE Contracts # DE-AC02-09CH11466 and DE-FG02-99ER54519 AM08.

Develop and test fuel cell powered on-site integrated total energy systems. Phase 3: Full-scale power plant development

NASA Technical Reports Server (NTRS)

Kaufman, A.; Pudick, S.; Wang, C. L.; Werth, J.; Whelan, J. A.

1984-01-01

Two 25-cell, 13 inch x 23 inch (4kW) stacks were started up to evaluate the reliability of component and stack technology developed through the end of 1983. Both stacks started up well and are running satisfactorily on hydrogen-air after 1900 hours and 800 hours, respectively. A synthetic-reformat mixing station is nearing completion, and both stacks will be operated on reformate fuel. A stack-protection control system was placed in operation for Stack No. 2, and a similar set-up is in preparation for Stack No. 1. This system serves to change operating conditions or shut the stack down to avoid deleterious effects from nonstack-related upsets. The capability will greatly improve changes of obtaining meaningful long-term test data.

Numerical-experimental observation of shape bistability of red blood cells flowing in a microchannel

NASA Astrophysics Data System (ADS)

Guckenberger, Achim; Kihm, Alexander; John, Thomas; Wagner, Christian; Gekle, Stephan

Red blood cells flowing through capillaries assume a wide variety of different shapes owing to their high deformability. Predicting the realized shapes is a complex field as they are determined by the intricate interplay between the flow conditions and the membrane mechanics. In this work we construct the shape phase diagram of a single red blood cell with a physiological viscosity ratio flowing in a microchannel. We use both experimental in-vitro measurements as well as 3D numerical simulations to complement the respective other one. Numerically, we have easy control over the initial starting configuration and natural access to the full 3D shape. With this information we obtain the phase diagram as a function of initial position, starting shape and cell velocity. Experimentally, we measure the occurrence frequency of the different shapes as a function of the cell velocity to construct the experimental diagram which is in good agreement with the numerical observations. Two different major shapes are found, namely croissants and slippers. Notably, both shapes show coexistence at low (<1 mm/s) and high velocities (>3 mm/s) while in-between only croissants are stable. This pronounced bistability indicates that RBC shapes are not only determined by system parameters such as flow velocity or channel size, but also strongly depend on the initial conditions.

An Evaluation of TCP with Larger Initial Windows

NASA Technical Reports Server (NTRS)

Allman, Mark; Hayes, Christopher; Ostermann, Shawn

1998-01-01

Transmission Control Protocol (TCP's) slow start algorithm gradually increases the amount of data a sender injects into the network, which prevents the sender from overwhelming the network with an inappropriately large burst of traffic. However, the slow start algorithm can make poor use of the available band-width for transfers which are small compared to the bandwidth-delay product of the link, such as file transfers up to few thousand characters over satellite links or even transfers of several hundred bytes over local area networks. This paper evaluates a proposed performance enhancement that raises the initial window used by TCP from 1 MSS-sized segment to roughly 4 KB. The paper evaluates the impact of using larger initial windows on TCP transfers over both the shared Internet and dialup modem links.

Starting Up Your Own Business in the Hotel and Catering Industry. A Self-Help Guide from the Small Business Service of the Hotel and Catering Industry Training Board.

ERIC Educational Resources Information Center

Hotel and Catering Training Board, Wembley (England).

This guide is intended to assist the potential small business proprietor in successfully starting a business in the hotel and catering industry. It is divided into five sections. The first section discusses factors to be considered in making the initial decision of whether or not to seek self-employment in the industry (options, potential…

Starting a hospital-based home health agency: Part II--Key success factors.

PubMed

Montgomery, P

1993-09-01

In Part II of a three-part series, the financial, technological and legislative issues of a hospital-based home health-agency are discussed. Beginning a home healthcare service requires intensive research to answer key environmental and operational questions--need, competition, financial projections, initial start-up costs and the impact of delayed depreciation. Assessments involving technology, staffing, legislative and regulatory issues can help project service volume, productivity and cost-control.

Improving Palliative Care Team Meetings: Structure, Inclusion, and "Team Care".

PubMed

Brennan, Caitlin W; Kelly, Brittany; Skarf, Lara Michal; Tellem, Rotem; Dunn, Kathleen M; Poswolsky, Sheila

2016-07-01

Increasing demands on palliative care teams point to the need for continuous improvement to ensure teams are working collaboratively and efficiently. This quality improvement initiative focused on improving interprofessional team meeting efficiency and subsequently patient care. Meeting start and end times improved from a mean of approximately 9 and 6 minutes late in the baseline period, respectively, to a mean of 4.4 minutes late (start time) and ending early in our sustainability phase. Mean team satisfaction improved from 2.4 to 4.5 on a 5-point Likert-type scale. The improvement initiative clarified communication about patients' plans of care, thus positively impacting team members' ability to articulate goals to other professionals, patients, and families. We propose several recommendations in the form of a team meeting "toolkit." © The Author(s) 2015.

Evolution of plasma wakes in density up- and down-ramps

NASA Astrophysics Data System (ADS)

Zhang, C. J.; Joshi, C.; Xu, X. L.; Mori, W. B.; Li, F.; Wan, Y.; Hua, J. F.; Pai, C. H.; Wang, J.; Lu, W.

2018-02-01

The time evolution of plasma wakes in density up- and down-ramps is examined through theory and particle-in-cell simulations. Motivated by observation of the reversal of a linear plasma wake in a plasma density upramp in a recent experiment (Zhang et al 2017 Phys. Rev. Lett. 119 064801) we have examined the behaviour of wakes in plasma ramps that always accompany any plasma source used for plasma-based acceleration. In the up-ramp case it is found that, after the passage of the drive pulse, the wavnumber/wavelength of the wake starts to decrease/increase with time until it eventually tends to zero/infinity, then the wake reverses its propagation direction and the wavenunber/wavelength of the wake begins to increase/shrink. The evolutions of the wavenumber and the phase velocity of the wake as functions of time are shown to be significantly different in the up-ramp and the down-ramp cases. In the latter case the wavenumber of the wake at a particular position in the ramp increases until the wake is eventually damped. It is also shown that the waveform of the wake at a particular time after being excited can be precisely controlled by tuning the initial plasma density profile, which may enable a new type of plasma-based ultrafast optics.

Social, psychological and existential well-being in patients with glioma and their caregivers: a qualitative study

PubMed Central

Cavers, Debbie; Hacking, Belinda; Erridge, Sara E.; Kendall, Marilyn; Morris, Paul G.; Murray, Scott A.

2012-01-01

Background: Cerebral glioma has a devastating impact on cognitive, physical, social, psychological and spiritual well-being. We sought to understand the multidimensional experience of patients with this form of cancer as they progressed from receiving a diagnosis to the terminal phase of the disease. Methods: We recruited patients with a suspected brain tumour from a tertiary referral centre in the United Kingdom. We interviewed patients and their caregivers at key stages of the illness: before receiving a formal diagnosis, at the start of initial treatment, after initial treatment was completed and at six months’ follow-up; caregivers were also interviewed postbereavement. We interviewed the patients’ general practitioners once, after treatment had been completed. We transcribed the interviews and analyzed them thematically using the constant comparative method of a grounded theory approach. Results: We conducted in-depth interviews with 26 patients, 23 of their relatives and 19 general practitioners. We saw evidence of physical, social, psychological and existential distress even before a diagnosis was confirmed. Social decline followed a similar trajectory to that of physical decline, whereas psychological and existential distress were typically acute around diagnosis and again after initial treatment. Each patient’s individual course varied according to other factors including the availability of support and individual and family resources (e.g., personal resilience and emotional support). Interpretation: There are practical ways that clinicians can care for patients with glioma and their caregivers, starting from before a diagnosis is confirmed. Understanding the trajectories of physical, social, psychological and existential well-being for these patients allows health care professionals to predict their patients’ likely needs so they can provide appropriate support and sensitive and effective communication. PMID:22431898

Estimated mortality of adult HIV-infected patients starting treatment with combination antiretroviral therapy

PubMed Central

Yiannoutsos, Constantin Theodore; Johnson, Leigh Francis; Boulle, Andrew; Musick, Beverly Sue; Gsponer, Thomas; Balestre, Eric; Law, Matthew; Shepherd, Bryan E; Egger, Matthias

2012-01-01

Objective To provide estimates of mortality among HIV-infected patients starting combination antiretroviral therapy. Methods We report on the death rates from 122 925 adult HIV-infected patients aged 15 years or older from East, Southern and West Africa, Asia Pacific and Latin America. We use two methods to adjust for biases in mortality estimation resulting from loss from follow-up, based on double-sampling methods applied to patient outreach (Kenya) and linkage with vital registries (South Africa), and apply these to mortality estimates in the other three regions. Age, gender and CD4 count at the initiation of therapy were the factors considered as predictors of mortality at 6, 12, 24 and >24 months after the start of treatment. Results Patient mortality was high during the first 6 months after therapy for all patient subgroups and exceeded 40 per 100 patient years among patients who started treatment at low CD4 count. This trend was seen regardless of region, demographic or disease-related risk factor. Mortality was under-reported by up to or exceeding 100% when comparing estimates obtained from passive monitoring of patient vital status. Conclusions Despite advances in antiretroviral treatment coverage many patients start treatment at very low CD4 counts and experience significant mortality during the first 6 months after treatment initiation. Active patient tracing and linkage with vital registries are critical in adjusting estimates of mortality, particularly in low- and middle-income settings. PMID:23172344

Forced free-shear layer measurements

NASA Technical Reports Server (NTRS)

Leboeuf, Richard L.

1994-01-01

Detailed three-dimensional three-component phase averaged measurements of the spanwise and streamwise vorticity formation and evolution in acoustically forced plane free-shear flows have been obtained. For the first time, phase-averaged measurements of all three velocity components have been obtained in both a mixing layer and a wake on three-dimensional grids, yielding the spanwise and streamwise vorticity distributions without invoking Taylor's hypothesis. Initially, two-frequency forcing was used to phase-lock the roll-up and first pairing of the spanwise vortical structures in a plane mixing layer. The objective of this study was to measure the near-field vortical structure morphology in a mixing layer with 'natural' laminar initial boundary layers. For the second experiment the second and third subharmonics of the fundamental roll-up frequency were added to the previous two-frequency forcing in order to phase-lock the roll-up and first three pairings of the spanwise rollers in the mixing layer. The objective of this study was to determine the details of spanwise scale changes observed in previous time-averaged measurements and flow visualization of unforced mixing layers. For the final experiment, single-frequency forcing was used to phase-lock the Karman vortex street in a plane wake developing from nominally two-dimensional laminar initial boundary layers. The objective of this study was to compare measurements of the three-dimensional structure in a wake developing from 'natural' initial boundary layers to existing models of wake vortical structure.

An Investigation Into: I) Active Flow Control for Cold-Start Performance Enhancement of a Pump-Assisted, Capillary-Driven, Two-Phase Cooling Loop II) Surface Tension of n-Pentanol + Water, a Self-Rewetting Working Fluid, From 25 °C to 85 °C

NASA Astrophysics Data System (ADS)

Bejarano, Roberto Villa

Cold-start performance enhancement of a pump-assisted, capillary-driven, two-phase cooling loop was attained using proportional integral and fuzzy logic controls to manage the boiling condition inside the evaporator. The surface tension of aqueous solutions of n-Pentanol, a self-rewetting fluid, was also investigated for enhancing heat transfer performance of capillary driven (passive) thermal devices was also studied. A proportional-integral control algorithm was used to regulate the boiling condition (from pool boiling to thin-film boiling) and backpressure in the evaporator during cold-start and low heat input conditions. Active flow control improved the thermal resistance at low heat inputs by 50% compared to the baseline (constant flow rate) case, while realizing a total pumping power savings of 56%. Temperature overshoot at start-up was mitigated combining fuzzy-logic with a proportional-integral controller. A constant evaporator surface temperature of 60°C with a variation of +/-8°C during start-up was attained with evaporator thermal resistances as low as 0.10 cm2--K/W. The surface tension of aqueous solutions of n-Pentanol, a self-rewetting working fluid, as a function of concentration and temperature were also investigated. Self-rewetting working fluids are promising in two-phase heat transfer applications because they have the ability to passively drive additional working fluid towards the heated surface; thereby increasing the dryout limitations of the thermal device. Very little data is available in literature regarding the surface tension of these fluids due to the complexity involved in fluid handling, heating, and experimentation. Careful experiments were performed to investigate the surface tension of n-Pentanol + water. The concentration and temperature range investigated were from 0.25%wt. to1.8%wt and 25°C to 85°C, respectively.

Communication: importance sampling including path correlation in semiclassical initial value representation calculations for time correlation functions.

PubMed

Pan, Feng; Tao, Guohua

2013-03-07

Full semiclassical (SC) initial value representation (IVR) for time correlation functions involves a double phase space average over a set of two phase points, each of which evolves along a classical path. Conventionally, the two initial phase points are sampled independently for all degrees of freedom (DOF) in the Monte Carlo procedure. Here, we present an efficient importance sampling scheme by including the path correlation between the two initial phase points for the bath DOF, which greatly improves the performance of the SC-IVR calculations for large molecular systems. Satisfactory convergence in the study of quantum coherence in vibrational relaxation has been achieved for a benchmark system-bath model with up to 21 DOF.

Study of the two-phase dummy load shut-down strategy for proton exchange membrane fuel cells

NASA Astrophysics Data System (ADS)

Zhang, Q.; Lin, R.; Cui, X.; Xia, S. X.; Yang, Z.; Chang, Y. T.

2017-02-01

This paper presents a new system strategy designed to alleviate the performance decay caused by start-up/shut-down (SU/SD) conditions in proton exchange membrane fuel cells (PEMFCs). The innovative method was tested using a two-phase dummy load composed of a linearly declined main load and a fixed small auxiliary load. The initial value of the main load must be controlled within a proper range, and a closed-ended air exhaust is necessary. According to the analysis of in-situ current density distribution during SD processes, the two-phase dummy load can continuously fit the process of oxygen reduction in the cathode, whereas the conventional dummy load leads to local air starvation. Polarization curves and cyclic voltammetry (CV) were employed to evaluate the performance decay during SU/SD repetition. After tests of 900 cycles, the highest voltage degradation rate of the PEMFC was 3.33 μV cycle-1 (800 mA cm-2), and the electrochemical surface area (ECSA) loss was 0.0046 m2 g-1 cycle-1 with the two-phase dummy load strategy. After comparing results with similar work on a single PEMFC, the authors confirmed the preeminent effectiveness of this strategy. This strategy will also improve fuel cell stack performance due to controllable SD duration and comparatively low performance decay rates.

Low cost solar aray project: Experimental process system development unit for producing semiconductor-grade silicon using the silane-to-silicon process

NASA Technical Reports Server (NTRS)

1981-01-01

This phase consists of the engineering design, fabrication, assembly, operation, economic analysis, and process support R&D for an Experimental Process System Development Unit (EPSDU). The mechanical bid package was issued and the bid responses are under evaluation. Similarly, the electrical bid package was issued, however, responses are not yet due. The majority of all equipment is on order or has been received at the EPSDU site. The pyrolysis/consolidation process design package was issued. Preparation of process and instrumentation diagram for the free-space reactor was started. In the area of melting/consolidation, Kayex successfully melted chunk silicon and have produced silicon shot. The free-space reactor powder was successfully transported pneumatically from a storage bin to the auger feeder twenty-five feet up and was melted. The fluid-bed PDU has successfully operated at silane feed concentrations up to 21%. The writing of the operating manual has started. Overall, the design phase is nearing completion.

Racial and Ethnic Differences in ADHD Treatment Quality Among Medicaid-Enrolled Youth.

PubMed

Cummings, Janet R; Ji, Xu; Allen, Lindsay; Lally, Cathy; Druss, Benjamin G

2017-06-01

We estimated racial/ethnic differences in attention-deficit/hyperactivity disorder (ADHD) care quality and treatment continuity among Medicaid-enrolled children. Using Medicaid data from 9 states (2008 to 2011), we identified 172 322 youth (age 6 to 12) initiating ADHD medication. Outcome measures included: (1) adequate follow-up care in the (a) initiation and (b) continuation and maintenance (C&M) treatment phases; (2) combined treatment with medication and psychotherapy (versus medication alone); (3) medication discontinuation; and (4) treatment disengagement (ie, discontinued medication and received no psychotherapy). Logistic regressions controlled for confounding measures. Among those initiating medication, three-fifths received adequate follow-up care in the initiation and C&M phases, and under two-fifths received combined treatment. Compared with whites, African American youth were less likely to receive adequate follow-up in either phase ( P < .05), whereas Hispanic youth were more likely to receive adequate follow-up in the C&M phase ( P < .001). African American and Hispanic youth were more likely than whites to receive combined treatment ( P < .05). Over three-fifths discontinued medication, and over four-tenths disengaged from treatment. Compared with whites, African American and Hispanic children were 22.4% and 16.7% points more likely to discontinue medication, and 13.1% and 9.4% points more likely to disengage from treatment, respectively ( P < .001). Care quality for Medicaid-enrolled youth initiating ADHD medication is poor, and racial/ethnic differences in these measures are mixed. The most important disparities occur in the higher rates of medication discontinuation among minorities, which translate into higher rates of treatment disengagement because most youth discontinuing medication receive no psychotherapy. Copyright © 2017 by the American Academy of Pediatrics.

IMMEDIATE EFFECTS OF DEEP TRUNK MUSCLE TRAINING ON SWIMMING START PERFORMANCE.

PubMed

Iizuka, Satoshi; Imai, Atsushi; Koizumi, Keisuke; Okuno, Keisuke; Kaneoka, Koji

2016-12-01

In recent years, deep trunk muscle training has been adopted in various sports, including swimming. This is performed both in everyday training and as part of the warm-up routine before competitive races. It is suggested that trunk stabilization exercises are effective in preventing injury, and aid in improving performance. However, conclusive evidence of the same is yet to be obtained. The time of start phase of swimming is a factor that can significantly influence competition performance in a swimming race. If trunk stabilization exercises can provide instantaneous trunk stability, it is expected that they will lead to performance improvements in the start phase of swimming. The purpose of this study was to investigate the immediate effect of trunk stabilization exercises on the start phase in swimming. Intervention study. Nine elite male swimmers (mean age 20.2 ± 1.0 years; height 174.4 ± 3.5 cm; weight 68.9 ± 4.1 kg) performed the swimming start movement. The measurement variables studied included flying distance, and the time and velocity of subjects at hands' entry and on reaching five meters. Measurements were taken in trials immediately before and after the trunk stabilization exercises. A comparison between pre- and post-exercise measurements was assessed. The time to reach five meters (T 5m ) decreased significantly after trunk stabilization exercises, by 0.019 s (p = 0.02). Velocity at entry (V entry ) did not demonstrate significant change, while velocity at five meters (V 5m ) increased significantly after the exercises (p = 0.023). In addition, the speed reduction rate calculated from V entry and V 5m significantly decreased by 5.17% after the intervention (p = 0.036). Trunk stabilization exercises may help reduce the time from start to five meters in the start phase in swimming. The results support the hypothesis that these exercises may improve swimming performance. Level 3b.

Phase retrieval in generalized optical interferometry systems.

PubMed

Farriss, Wesley E; Fienup, James R; Malhotra, Tanya; Vamivakas, A Nick

2018-02-05

Modal analysis of an optical field via generalized interferometry (GI) is a novel technique that treats said field as a linear superposition of transverse modes and recovers the amplitudes of modal weighting coefficients. We use phase retrieval by nonlinear optimization to recover the phase of these modal weighting coefficients. Information diversity increases the robustness of the algorithm by better constraining the solution. Additionally, multiple sets of random starting phase values assist the algorithm in overcoming local minima. The algorithm was able to recover nearly all coefficient phases for simulated fields consisting of up to 21 superpositioned Hermite Gaussian modes from simulated data and proved to be resilient to shot noise.

Loss to follow-up among children and adolescents growing up with HIV infection: age really matters

PubMed Central

Kranzer, Katharina; Bradley, John; Musaazi, Joseph; Nyathi, Mary; Gunguwo, Hilary; Ndebele, Wedu; Dixon, Mark; Ndhlovu, Mbongeni; Rehman, Andrea; Khan, Palwasha; Vogt, Florian; Apollo, Tsitsi; Ferrand, Rashida Abbas

2017-01-01

Abstract Introduction: Globally, increasing numbers of HIV-infected children are reaching adolescence due to antiretroviral therapy (ART). We investigated rates of loss-to-follow-up (LTFU) from HIV care services among children as they transition from childhood through adolescence. Methods: Individuals aged 5–19 years initiated on ART in a public-sector HIV clinic in Bulawayo, Zimbabwe, between 2005 and 2009 were included in a retrospective cohort study. Participants were categorized into narrow age-bands namely: 5–9 (children), 10–14 (young adolescents) and 15–19 (older adolescents). The effect of age at ART initiation, current age (using a time-updated Lexis expansion) and transitioning from one age group to the next on LTFU was estimated using Poisson regression. Results: Of 2273 participants, 1013, 875 and 385 initiated ART aged 5–9, 10–14 and 15–19 years, respectively. Unlike those starting ART as children, individuals starting ART as young adolescents had higher LTFU rates after moving to the older adolescent age-band (Adjusted rate ratio (ARR) 1.54; 95% CI: 0.94–2.55) and similarly, older adolescents had higher LTFU rates after transitioning to being young adults (ARR 1.79; 95% CI: 1.05–3.07). In older adolescents, the LTFU rate among those who started ART in that age-band was higher compared to the rate among those starting ART at a younger age (ARR = 1.70; 95% CI: 1.05, 2.77). This however did not hold true for other age-groups. Conclusions: Adolescents had higher rates of LTFU compared to other age-groups, with older adolescents at particularly high risk in all analyses. Age-updated analyses that examine movement across narrow age-bands are paramount in understanding how developmental heterogeneity in children affects HIV outcomes. PMID:28715158

Pressure-Induced Dissolution and Reentrant Formation of Condensed, Liquid-Liquid Phase-Separated Elastomeric α-Elastin.

PubMed

Cinar, Hasan; Cinar, Süleyman; Chan, Hue Sun; Winter, Roland

2018-05-08

We investigated the combined effects of temperature and pressure on liquid-liquid phase separation (LLPS) phenomena of α-elastin up to the multi-kbar regime. FT-IR spectroscopy, CD, UV/Vis absorption, phase-contrast light and fluorescence microscopy techniques were employed to reveal structural changes and mesoscopic phase states of the system. A novel pressure-induced reentrant LLPS was observed in the intermediate temperature range. A molecular-level picture, in particular on the role of hydrophobic interactions, hydration, and void volume in controlling LLPS phenomena is presented. The potential role of the LLPS phenomena in the development of early cellular compartmentalization is discussed, which might have started in the deep sea, where pressures up to the kbar level are encountered. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Gas and ash emissions associated with the 2010–present activity of Sinabung Volcano, Indonesia

USGS Publications Warehouse

Primulyana, Sofyan; Kern, Christoph; Lerner, Allan; Saing, Ugan; Kunrat, Syegi; Alfianti, Hilma; Marlia, Mitha

2017-01-01

Sinabung Volcano (Sumatra, Indonesia) awoke from over 1200 years of dormancy with multiple phreatic explosions in 2010. After a period of quiescence, Sinabung activity resumed in 2013, producing frequent explosions, lava dome extrusion, and pyroclastic flows from dome collapses, becoming one of the world's most active volcanoes and displacing over 20,000 citizens. This study presents a compilation of the geochemical datasets collected by the Indonesian Center for Volcanology and Geological Hazard Mitigation (CVGHM) from 2010 - current (2016), which provides insights into the evolution of the eruption. Based on observations of SO2 emissions, ash componentry, leachate chemistry, and bulk ash geochemistry, the eruption can be split into five distinct phases. The initial stage of phreatic summit explosions occurred from August - October 2010, during which background SO2 emissions averaged ~550 ± 180 t/d (1 s.d.). An eruptive pause (phase two) starting in October 2010 abruptly ended in September 2013 with a resumption of conduit-clearing eruptions. This third phase had a relatively modest background SO2 emission rate (avg. ~410 ± 275 t/d) and produced ash consisting entirely of accidental ejecta with high S/Cl leachate ratios (up to 30), suggestive of deep-sourced magma and the incorporation of hydrothermal sulfur-bearing phases. The most intense phase of the eruption (phase four) occurred from December 2013 to February 2014, when juvenile magma first reached the surface. This period included dozens of large eruptions per day, high SO2 emission rates (average: 1,120 ± 1,030 t/d, peak: ~3,800 t/d), the onset of lava dome extrusion, and a dramatic drop in S/Cl ash leachates to ratios < 5, all reflecting increased degassing from shallow magma and the clearing out of sulfurous phases from the old hydrothermal system. From late February 2014 through the time of writing (September 2016), Sinabung settled into a relatively steady state of lower activity (phase five). Ash emissions now consist of dominantly juvenile material, and background SO2 emission rates have been progressively decreasing to an average of ~250 - 300 t/d. Starting August 2016, SO2 emissions started being measured in a continuous manner using a network of permanent scanning DOAS instruments. We find that long-term SO2 emission rates have been gradually declining at Sinabung since early 2014, consistent with an apparent decrease in magma supply. Our degassing model suggests that large explosions and pyroclastic flows could continue in the near-term owing to conduit plugging and dome collapses, remaining a major threat until the magma supply rate decreases further and the eruption ends.

The Early-Career Development of Science Teachers from Initial Training Onwards: The Advantages of a Multifaceted Five-Year Programme

ERIC Educational Resources Information Center

Clarke, Julian; Howarth, Sue; King, Chris; Perry, John; Tas, Maarten; Twidle, John; Warhurst, Adrian; Garrett, Caro

2014-01-01

If a programme were to be devised for the early-career development of science teachers, what might such a programme look like? This was the focus of a meeting of science educators interested in developing such a structure, from the start of initial teacher training onwards. The contributions, modified and written up here, include a suggested…

Analysis of key microbial community during the start-up of anaerobic ammonium oxidation process with paddy soil as inoculated sludge.

PubMed

Xu, Xianglong; Liu, Guohua; Wang, Yuanyuan; Zhang, Yuankai; Wang, Hao; Qi, Lu; Wang, Hongchen

2018-02-01

A sequencing batch reactor (SBR)-anaerobic ammonium oxidation (anammox) system was started up with the paddy soil as inoculated sludge. The key microbial community structure in the system along with the enrichment time was investigated by using molecular biology methods (e.g., high-throughput 16S rRNA gene sequencing and quantitative PCR). Meanwhile, the influent and effluent water quality was continuously monitored during the whole start-up stage. The results showed that the microbial diversity decreased as the operation time initially and increased afterwards, and the microbial niches in the system were redistributed. The anammox bacterial community structure in the SBR-anammox system shifted during the enrichment, the most dominant anammox bacteria were CandidatusJettenia. The maximum biomass of anammox bacteria achieved 1.68×10 9 copies/g dry sludge during the enrichment period, and the highest removal rate of TN achieved around 75%. Copyright © 2017. Published by Elsevier B.V.

Resilience Training for Healthcare Staff (RTHS) Implementation Evaluation Phase 1

DTIC Science & Technology

2017-01-05

Healthcare Staff (RTHS) Implementation Evaluation Phase 1 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Start, Amanda...been evaluated . As of September 2016, 149 MRTs had been certified to teach the MRT Medical Program. Between October and November 2016, 149 MRTs received...an online survey invitation. A follow up phone survey was attempted to 97 MRTs stationed INCONUS. Results of the evaluation included

Implementing a bar-coded bedside medication administration system.

PubMed

Yates, Cindy

2007-01-01

Hospitals across the nation are struggling with implementing electronic medication administration and reporting (eMAR) systems as part of patient safety programs. St Luke's Hospital in Chesterfield, Mo, initiated their eMAR initiative in June 2003, initiating program start-up in September 2004. This case study documents how the project was approached, its overall success, and what was learned along the way. Also included is a recent update highlighting the expansion of St Luke's patient safety initiative, adapting eMAR to two specialty units: dialysis and laboratory processes.

Entrepreneurism from the ground up: Entrepreneurism, innovation, and responsiveness in a start-up university

NASA Astrophysics Data System (ADS)

Wong, Michael Paul Anthony

Colleges and universities are under increased pressure from internal and external constituencies for increased innovation and responsiveness. Entrepreneurial private industry models such as start-up businesses, corporate ventures and spin-off organizations have been recognized for their ability to quickly adapt to changing business environments and rapidly innovate to take advantage of new opportunities. This case study investigates these claims with regard to a start-up university founded with the identity of an entrepreneurial, interdisciplinary institution that prepares graduate level students for leadership careers as entrepreneurs in the bio-tech industry. By interviewing twenty-four administrators, faculty, and members of the Board of Trustees, including all but one of the founding full-time faculty, I present an "insider's" depiction of the lived experience of those most closely associated with the founding and subsequent institution building of this unique higher education organization. Initial chapters present a theory of higher education organizations, derived from Birnbaum (1988) and Bolman and Deal (1991), as driven by two primary tasks: resolving identity and establishing power and resources in relation to that identity. I also present Russell and Russell's (1992) theory of "entrepreneurial posture" in relation to a higher education organization. Subsequent chapters analyze the start-up university's environment, strategy, culture, and structure within the framework of the two primary organizational tasks and Russell and Russell's (1992) definition of an entrepreneurial organization.

Tocilizumab treatment leads to improvement in disease activity regardless of CCP status in rheumatoid arthritis.

PubMed

Cappelli, Laura C; Palmer, Judy Lynn; Kremer, Joel; Bingham, Clifton O

2017-10-01

Autoantibodies can be useful in predicting response to certain treatments in rheumatoid arthritis (RA). We aimed to evaluate initial response to tocilizumab (TCZ) by change in physician and patient-reported outcomes and laboratory parameters in a real-world cohort of patients with RA. We analyzed the data by autoantibody status to determine whether patients with seronegative RA had improved response to tocilizumab when compared to their seropositive counterparts. Data from the CORRONA RA registry were analyzed. Patients were included if they were started on TCZ and had data from a follow-up visit 4-8 months after initiation, as well as having information on serologic status. Serologic status was determined by presence of anti-cyclic citrullinated peptide (CCP) antibodies. Changes in disease activity measures from baseline to follow-up visit were evaluated. Both CCP-negative and -positive groups had statistically significant improvement in physician-reported measurements (physician rating of disease activity and joint counts), patient-reported measures (disease activity, pain, and fatigue), and acute phase reactants after 4-8 months of treatment with tocilizumab. The magnitude of improvement, however, did not differ significantly by CCP status. Tocilizumab led to statistically significant improvement in all patient- and physician-reported measures of disease activity evaluated in this cohort of patient with RA. The response to tocilizumab did not differ by CCP status. Copyright © 2017 Elsevier Inc. All rights reserved.

Observation of laser formation inside a laser cavity containing a phase conjugate mirror

NASA Astrophysics Data System (ADS)

Wu, Frank F.

2012-03-01

Adaptive optics (AO) systems are used to compensate atmospheric perturbations on a propagating laser beam. However, AO needs a beacon to obtain the phase information. This paper presents a possible formation of beacon in target-in-theloop (TIL) geometry which is analog to a laser cavity. The TIL laser cavity is formed with a high reflectivity mirror on one end and an optical phase conjugate mirror as the second mirror. The TIL laser is initialized by a single frequency 10 ns Q-switched laser pulse. This is very similar to how an injection seeding or regenerative amplifier scheme starts a laser oscillation. With a cavity length of around 11 meters and an initial laser pulse of 10 ns, we have been able to isolate laser field images related to each round-trip pulse. Furthermore, by replacing the first mirror with a rough-surface target to simulate an uncooperative target and adding phase distortion elements to simulate atmospheric effects, we can observe the image status under such conditions.

Development of the simulation system {open_quotes}IMPACT{close_quotes} for analysis of nuclear power plant severe accidents

DOE Office of Scientific and Technical Information (OSTI.GOV)

Naitoh, Masanori; Ujita, Hiroshi; Nagumo, Hiroichi

1997-07-01

The Nuclear Power Engineering Corporation (NUPEC) has initiated a long-term program to develop the simulation system {open_quotes}IMPACT{close_quotes} for analysis of hypothetical severe accidents in nuclear power plants. IMPACT employs advanced methods of physical modeling and numerical computation, and can simulate a wide spectrum of senarios ranging from normal operation to hypothetical, beyond-design-basis-accident events. Designed as a large-scale system of interconnected, hierarchical modules, IMPACT`s distinguishing features include mechanistic models based on first principles and high speed simulation on parallel processing computers. The present plan is a ten-year program starting from 1993, consisting of the initial one-year of preparatory work followed bymore » three technical phases: Phase-1 for development of a prototype system; Phase-2 for completion of the simulation system, incorporating new achievements from basic studies; and Phase-3 for refinement through extensive verification and validation against test results and available real plant data.« less

Phase 2 Clinical Trial of AC105 (Mg/PEG) for Treatment of Acute Spinal Cord Injury (SCI)

DTIC Science & Technology

2015-12-01

initiation of 10 centers in the first 6 months, and an additional 10 centers over the next 6 months, the subject recruitment phase would have...Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8 Q9 Q10 Q11 Q12 FDA Approval, Planning & Rolling Initiation of Sites Active phase of study: 6 & 12 month follow-ups Data...analysis Reports The Proposed Milestones for the project were: 1. Month 3 – FDA approval of clinical protocol 2. Month 6 – First site initiation and IRB

SOLVENT EXTRACTION PROCESS

DOEpatents

Jonke, A.A.

1957-10-01

In improved solvent extraction process is described for the extraction of metal values from highly dilute aqueous solutions. The process comprises contacting an aqueous solution with an organic substantially water-immiscible solvent, whereby metal values are taken up by a solvent extract phase; scrubbing the solvent extract phase with an aqueous scrubbing solution; separating an aqueous solution from the scrubbed solvent extract phase; and contacting the scrubbed solvent phase with an aqueous medium whereby the extracted metal values are removed from the solvent phase and taken up by said medium to form a strip solution containing said metal values, the aqueous scrubbing solution being a mixture of strip solution and an aqueous solution which contains mineral acids anions and is free of the metal values. The process is particularly effective for purifying uranium, where one starts with impure aqueous uranyl nitrate, extracts with tributyl phosphate dissolved in carbon tetrachloride, scrubs with aqueous nitric acid and employs water to strip the uranium from the scrubbed organic phase.

Start-up of simultaneous removal of ammonium and sulfate from an anaerobic ammonium oxidation (anammox) process in an anaerobic up-flow bioreactor.

PubMed

Yang, Zhiquan; Zhou, Shaoqi; Sun, Yanbo

2009-09-30

A laboratory testing of simultaneous removal of ammonium and sulfate (SRAS) was studied from an anammox process in an anaerobic bioreactor filled with granular activated carbon. Two different phases of experiment were investigated to start up the SRAS process, and final batch tests were performed to analyze the SRAS process. The experiment included an anammox process and an SRAS process. During the anammox process, the highest removal efficiency of ammonium and nitrite was up to 97 and 98%, respectively. After 160 days in the stationary phase of anammox process, the ratio of ammonium to nitrite consumption was approximately 1:1.15, which is much higher than 1:1.32 in the traditional anammox process. The extra electron acceptor, such as sulfate, was thought to react with ammonium by bacteria. Synthetic wastewater containing ammonium chlorine and sodium sulfate was used as the feed for the bioreactor in the second phase of experiment. During the SRAS process, the influent concentrations of ammonium and sulfate were controlled to be 50-60 and 210-240 mg L(-1) respectively. After start-up and acclimatization of this process for 60 days, the average effluent concentrations of ammonium and sulfate were 30 and 160 mg L(-1), respectively. The simultaneous ammonium and sulfate removal was detected in the reactor. In order to further validate the biochemical interaction between ammonium and sulfate, batch tests was carried out. Abiotic tests were carried out to demonstrate that the pure chemical action between ammonium and sulfate without microorganism was not possible. Biotic assays with different ammonium and sulfate concentrations were further investigated that high concentrations of ammonium and sulfate could promote simultaneous removal of ammonium and sulfate. And elemental sulfur and nitrogen gas as the products measured in the SRAS process helped to demonstrate the occurrence of new interaction between nitrogen and sulfur. The new process of SRAS in the inorganic condition, including simultaneous removal of ammonium and sulfate, and the appearance of elemental sulfur and nitrogen gas as the terminal products, widened the cycle approach between nitrogen and sulfur.

Growth phase-dependent induction of stationary-phase promoters of Escherichia coli in different gram-negative bacteria.

PubMed Central

Miksch, G; Dobrowolski, P

1995-01-01

RSF1010-derived plasmids carrying a fusion of a promoterless lacZ gene with the sigma s-dependent growth phase-regulated promoters of Escherichia coli, bolAp1 and fic, were constructed. The plasmids were mobilized into the gram-negative bacterial species Acetobacter methanolicus, Xanthomonas campestris, Pseudomonas putida, and Rhizobium meliloti. The beta-galactosidase activities of bacterial cultures were determined during exponential and stationary growth phases. Transcriptional activation of the fic promoter in the different bacteria was growth phase dependent as in E. coli and was initiated generally during the transition to stationary phase. The induction of the bolA promoter was also growth phase dependent in the bacteria tested. While the expression in E. coli and R. meliloti was initiated during the transition from exponential to stationary phase, the induction in A. methanolicus, P. putida, and X. campestris started some hours after stationary growth phase was reached. In all the species tested, DNA fragments hybridizing with the rpoS gene of E. coli were detected. The results show that in different gram-negative bacteria, stationary-phase-specific sigma factors which are structurally and functionally homologous to sigma s and are able to recognize the promoter sequences of both bolA and fic exist. PMID:7665531

Expanding Access

ERIC Educational Resources Information Center

Roach, Ronald

2007-01-01

There is no question that the United States lags behind most industrialized nations in consumer access to broadband Internet service. For many policy makers and activists, this shortfall marks the latest phase in the struggle to overcome the digital divide. To remedy this lack of broadband affordability and availability, one start-up firm--with…

Pairing the Adult Learner and Boutique Wineries

ERIC Educational Resources Information Center

Holyoke, Laura; Heath-Simpson, Delta

2013-01-01

This study explored connections between adult learners and their experiences in the context of small boutique wineries operating in the start-up phase of the organizational life cycle. The research objective was to gain insight regarding the pairing of adult learners with the entering of a specialty industry. Fourteen individuals from four…

Efficiencies of Bio-electrocatalytic Production of Hydrogen from Lactate Using Shewanella oneidensis MR-1

USDA-ARS?s Scientific Manuscript database

Shewanella oneidensis MR-1 was grown in a chemostatic, continuously-fed bioelectrochemical cell under slightly aerated conditions. The start-up phase was controlled potentiostatically (0.4 V vs. SHE). When a stable performance was achieved, the reactor was switched to bio-electrocatalytic producti...

Conjunction Functions

ERIC Educational Resources Information Center

Riddle, Bob

2007-01-01

This spring, as the school year starts to wind down, there will be many opportunities for students to observe bright planets and to wrap up the year with some great conjunctions and close occultation with the Moon, planets, bright stars, and star clusters). These observations can be coordinated with student observations of the Moon's phase cycle…

Knowledge Translation Interventions to Improve the Timing of Dialysis Initiation: Protocol for a Cluster Randomized Trial.

PubMed

Chau, Elaine M T; Manns, Braden J; Garg, Amit X; Sood, Manish M; Kim, S Joseph; Naimark, David; Nesrallah, Gihad E; Soroka, Steven D; Beaulieu, Monica; Dixon, Stephanie; Alam, Ahsan; Tangri, Navdeep

2016-01-01

Early initiation of chronic dialysis (starting dialysis with higher vs lower kidney function) has risen rapidly in the past 2 decades in Canada and internationally, despite absence of established health benefits and higher costs. In 2014, a Canadian guideline on the timing of dialysis initiation, recommending an intent-to-defer approach, was published. The objective of this study is to evaluate the efficacy and safety of a knowledge translation intervention to promote the intent-to-defer approach in clinical practice. This study is a multicenter, 2-arm parallel, cluster randomized trial. The study involves 55 advanced chronic kidney disease clinics across Canada. Patients older than 18 years who are managed by nephrologists for more than 3 months, and initiate dialysis in the follow-up period are included in the study. Outcomes will be measured at the patient-level and enumerated within a cluster. Data on characteristics of each dialysis start will be determined by linkages with the Canadian Organ Replacement Register. Primary outcomes include the proportion of patients who start dialysis early with an estimated glomerular filtration rate greater than 10.5 mL/min/1.73 m 2 and start dialysis in hospital as inpatients or in an emergency room setting. Secondary outcomes include the rate of change in early dialysis starts; rates of hospitalizations, deaths, and cost of predialysis care (wherever available); quarterly proportion of new starts; and acceptability of the knowledge translation materials. We randomized 55 multidisciplinary chronic disease clinics (clusters) in Canada to receive either an active knowledge translation intervention or no intervention for the uptake of the guideline on the timing of dialysis initiation. The active knowledge translation intervention consists of audit and feedback as well as patient- and provider-directed educational tools delivered at a comprehensive in-person medical detailing visit. Control clinics are only exposed to guideline release without active dissemination. We hypothesize that the clinics randomized to the intervention group will have a lower proportion of early dialysis starts. Limitations include passive dissemination of the guideline through publication, and lead-time and survivor bias, which favors delayed dialysis initiation. If successful, this active knowledge translation intervention will reduce early dialysis starts, lead to health and economic benefits, and provide a successful framework for evaluating and disseminating future guidelines. ClinicalTrials.gov, NCT02183987.

Immunovirological response to triple nucleotide reverse-transcriptase inhibitors and ritonavir-boosted protease inhibitors in treatment-naive HIV-2-infected patients: The ACHIEV2E Collaboration Study Group.

PubMed

Benard, Antoine; van Sighem, Ard; Taieb, Audrey; Valadas, Emilia; Ruelle, Jean; Soriano, Vicente; Calmy, Alexandra; Balotta, Claudia; Damond, Florence; Brun-Vezinet, Françoise; Chene, Geneviève; Matheron, Sophie

2011-05-01

Triple nucleoside reverse-transcriptase inhibitors (NRTIs) are recommended by the World Health Organization as first-line regimen in treatment-naïve HIV-2-infected patients. However, ritonavir-boosted protease inhibitor (PI/r)-containing regimens are frequently prescribed. In the absence of previous randomized trials, we retrospectively compared these regimens in observational cohorts. HIV-2-infected patients from 7 European cohorts who started triple NRTI or PI/r since January 1998 were included. Piecewise linear models were used to estimate CD4 cell count and plasma HIV-2 RNA level slopes, differentiating an early phase (until end of month 3) and a second phase (months 4-12). On-treatment analyses censored data at major treatment modification and systematically at month 12. Forty-four patients started triple NRTI therapy and 126 started PI/r therapy. Overall, the median CD4 cell count was 191 cells/mm(3) and the median plasma HIV-2 RNA level was ≥2.7 log(10) copies/ml in 61% of the patients at combination antiretroviral therapy (cART) initiation; the median duration of the first cART was 20 months, not differing between groups. PI/r regimens were associated with better CD4 cell count and HIV-2 RNA level outcomes, compared with NRTI regimens. Estimated CD4 cell count slopes were +6 and +12 cells/mm(3)/month during the early phase (P = .22), and -60 cells/mm(3)/year versus +76 cells/mm(3)/year during the second phase (P = .002), for triple NRTI and PI/r, respectively. Estimated mean HIV-2 RNA levels at month 12 in patients with detectable viremia at cART initiation were 4.0 and 2.2 log(10) copies/ml, respectively (P = .005). In this observational study, PI/r-containing regimens showed superior efficacy over triple NRTI regimens as first-line therapy in HIV-2-infected patients.

Thermodynamic properties of gas-condensate system with abnormally high content of heavy hydrocarbons

NASA Astrophysics Data System (ADS)

Zanochuev, S. A.; Shabarov, A. B.; Podorozhnikov, S. Yu; Zakharov, A. A.

2018-05-01

Gas-condensate systems (GCS) with an abnormally high content of heavy hydrocarbons are characterized by a sharp change in both phase and component compositions with an insignificant decrease in pressure below the start pressure of the phase transitions (the beginning of condensation). Calculation methods for describing the phase behavior of such systems are very sensitive to the quality of the initial information. The uncertainty of the input data leads not only to significant errors in the forecast of phase compositions, but also to an incorrect phase state estimation of the whole system. The research presents the experimental thermodynamic parameters of the GCS of the BT reservoirs on the Beregovoye field, obtained at the phase equilibrium facility. The data contribute to the adaptation of the calculated models of the phase behavior of the GCS with a change in pressure.

A start-up of psychrophilic anaerobic sequence batch reactor digesting a 35 % total solids feed of dairy manure and wheat straw.

PubMed

Saady, Noori M Cata; Massé, Daniel I

2015-12-01

Zero liquid discharge is currently an objective in livestock manure management to minimize water pollution. This paper reports the start-up phase of a novel psychrophilic (20 °C) dry anaerobic digestion of dairy manure with bedding fed at 35 % total solids and an organic loading rate of 3.0 g total chemical oxygen demand kg(-1) inoculum day(-1) in anaerobic sequence batch reactors. The specific methane (CH4) yield ranged from 165.4 ± 9.8 to 213.9 ± 13.6 NL CH4 kg(-1) volatile solids (VS) with an overall average of 188 ± 17 NL CH4 kg(-1) VS during 11 successive start-up cycles (231 days) and a maximum CH4 production rate of 10.2 ± 0.6 NL CH4 kg(-1) VS day(-1). The inoculum-to-substrate (VS-based) ratio ranged from 4.06 to 4.47. Although methanogenesis proceeded fairly well the hydrolysis seemed to be the rate limiting step. It is possible start up psychrophilic dry anaerobic digestion of cow feces and wheat straw at feed TS of 35 % within 7-10 successive cycles (147-210 days).

Continental rift evolution: From rift initiation to incipient break-up in the Main Ethiopian Rift, East Africa

NASA Astrophysics Data System (ADS)

Corti, Giacomo

2009-09-01

The Main Ethiopian Rift is a key sector of the East African Rift System that connects the Afar depression, at Red Sea-Gulf of Aden junction, with the Turkana depression and Kenya Rift to the South. It is a magmatic rift that records all the different stages of rift evolution from rift initiation to break-up and incipient oceanic spreading: it is thus an ideal place to analyse the evolution of continental extension, the rupture of lithospheric plates and the dynamics by which distributed continental deformation is progressively focused at oceanic spreading centres. The first tectono-magmatic event related to the Tertiary rifting was the eruption of voluminous flood basalts that apparently occurred in a rather short time interval at around 30 Ma; strong plateau uplift, which resulted in the development of the Ethiopian and Somalian plateaus now surrounding the rift valley, has been suggested to have initiated contemporaneously or shortly after the extensive flood-basalt volcanism, although its exact timing remains controversial. Voluminous volcanism and uplift started prior to the main rifting phases, suggesting a mantle plume influence on the Tertiary deformation in East Africa. Different plume hypothesis have been suggested, with recent models indicating the existence of deep superplume originating at the core-mantle boundary beneath southern Africa, rising in a north-northeastward direction toward eastern Africa, and feeding multiple plume stems in the upper mantle. However, the existence of this whole-mantle feature and its possible connection with Tertiary rifting are highly debated. The main rifting phases started diachronously along the MER in the Mio-Pliocene; rift propagation was not a smooth process but rather a process with punctuated episodes of extension and relative quiescence. Rift location was most probably controlled by the reactivation of a lithospheric-scale pre-Cambrian weakness; the orientation of this weakness (roughly NE-SW) and the Late Pliocene (post 3.2 Ma)-recent extensional stress field generated by relative motion between Nubia and Somalia plates (roughly ESE-WNW) suggest that oblique rifting conditions have controlled rift evolution. However, it is still unclear if these kinematical boundary conditions have remained steady since the initial stages of rifting or the kinematics has changed during the Late Pliocene or at the Pliocene-Pleistocene boundary. Analysis of geological-geophysical data suggests that continental rifting in the MER evolved in two different phases. An early (Mio-Pliocene) continental rifting stage was characterised by displacement along large boundary faults, subsidence of rift depression with local development of deep (up to 5 km) asymmetric basins and diffuse magmatic activity. In this initial phase, magmatism encompassed the whole rift, with volcanic activity affecting the rift depression, the major boundary faults and limited portions of the rift shoulders (off-axis volcanism). Progressive extension led to the second (Pleistocene) rifting stage, characterised by a riftward narrowing of the volcano-tectonic activity. In this phase, the main boundary faults were deactivated and extensional deformation was accommodated by dense swarms of faults (Wonji segments) in the thinned rift depression. The progressive thinning of the continental lithosphere under constant, prolonged oblique rifting conditions controlled this migration of deformation, possibly in tandem with the weakening related to magmatic processes and/or a change in rift kinematics. Owing to the oblique rifting conditions, the fault swarms obliquely cut the rift floor and were characterised by a typical right-stepping arrangement. Ascending magmas were focused by the Wonji segments, with eruption of magmas at surface preferentially occurring along the oblique faults. As soon as the volcano-tectonic activity was localised within Wonji segments, a strong feedback between deformation and magmatism developed: the thinned lithosphere was strongly modified by the extensive magma intrusion and extension was facilitated and accommodated by a combination of magmatic intrusion, dyking and faulting. In these conditions, focused melt intrusion allows the rupture of the thick continental lithosphere and the magmatic segments act as incipient slow-spreading mid-ocean spreading centres sandwiched by continental lithosphere. Overall the above-described evolution of the MER (at least in its northernmost sector) documents a transition from fault-dominated rift morphology in the early stages of extension toward magma-assisted rifting during the final stages of continental break-up. A strong increase in coupling between deformation and magmatism with extension is documented, with magma intrusion and dyking playing a larger role than faulting in strain accommodation as rifting progresses to seafloor spreading.

Inhibition of chaotic escape from a potential well by incommensurate escape-suppressing excitations.

PubMed

Chacón, R; Martínez, J A

2002-03-01

Theoretical results are presented concerning the reduction of chaotic escape from a potential well by means of a harmonic parametric excitation that satisfies an ultrasubharmonic resonance condition with the escape-inducing excitation. The possibility of incommensurate escape-suppressing excitations is demonstrated by studying rational approximations to the irrational escape-suppressing frequency. The analytical predictions for the suitable amplitudes and initial phases of the escape-suppressing excitation are tested against numerical simulations based on a high-resolution grid of initial conditions. These numerical results indicate that the reduction of escape is reliably achieved for small amplitudes and at, and only at, the predicted initial phases. For the case of irrational escape-suppressing frequencies, the effective escape-reducing initial phases are found to lie close to the accumulation points of the set of suitable initial phases that are associated with the complete series of convergents up to the convergent giving the chosen rational approximation.

INITIATION PROCESSES FOR THE 2013 MAY 13 X1.7 LIMB FLARE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shen, Jinhua; Wang, Ya; Zhou, Tuanhui

2017-01-20

For the X1.7 class flare on 2013 May 13 (SOL2013-05-13T01:53), its initiation process was well observed by the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamic Observatory and the Extreme UltraViolet Imager (EUVI) on board STEREO-B . The initiation process incorporates the following phenomena: an X-ray precursor that started ∼9 minutes before flare onset, two hot magnetic loops (as seen with AIA hot channels) forming a sigmoidal core magnetic structure (as seen with the EUVI), a rapidly formed magnetic flux rope (MFR) that expands outward, and a flare loop that contracts inward. The two hot magnetic loops were activatedmore » after the occurrence of the X-ray precursor. After activation, magnetic reconnection occurred between the two hot magnetic loops (inside the sigmoid structure), which produced the expanding MFR and the contracting flare loop (CFL). The MFR and CFL can only be seen with AIA hot and cool channels, respectively. For this flare, the real initiation time can be regarded as being from the starting time of the precursor, and its impulsive phase started when the MFR began its fast expansion. In addition, the CFL and the growing postflare magnetic loops are different loop systems, and the CFL was the product of magnetic reconnection between sheared magnetic fields that also produced the MFR.« less

Success of Urgent-Start Peritoneal Dialysis in a Large Canadian Renal Program

PubMed Central

Alkatheeri, Ali M.A.; Blake, Peter G.; Gray, Daryl; Jain, Arsh K.

2016-01-01

♦ Background: Many patients start renal replacement therapy urgently on in-center hemodialysis via a central venous catheter, which is considered suboptimal. An alternative approach to manage these patients is to start them on peritoneal dialysis (PD). In this report, we describe the first reported Canadian experience with an urgent-start PD program. Additionally we reviewed the literature in this area. ♦ Methods: In this prospective observational study, we report on our experience in a single academic center. This program started in July 2010. We included patients who initiated PD urgently, that is within 2 weeks of catheter insertion. We followed all incident PD patients until October 2013 for mechanical and infectious complications. Peritoneal dialysis catheters were inserted either percutaneously or laparoscopically and dialysis was initiated in either an inpatient or outpatient setting. ♦ Results: Thirty patients were started on urgent PD during our study period. Follow-up ranged from 28 to 1,050 days. Twenty insertions (66.7 %) were done percutaneously and 10 (33.3%) were laparoscopic. Dialysis was initiated within 2 weeks (range: 0 – 13 days, median = 6 days). Twenty-four patients (80%) started PD in an outpatient setting and 6 patients (20%) required immediate inpatient PD start. Three patients (10%) developed a minor peri-catheter leak during the first week of training that was managed conservatively. There were no episodes of peritonitis or exit-site/tunnel infection during the first 4 weeks post-insertion. Four patients (13.3 %) from the percutaneous insertion group and 2 patients (6.7%) from laparoscopic insertions developed catheter dysfunction due to migration, which was managed by repositioning, without need for catheter replacement or modality switch. ♦ Conclusions: Our results are consistent with other studies in this area and demonstrate that urgent-start PD is an acceptable and safe alternative to hemodialysis in patients who need to start dialysis urgently without established dialysis access. PMID:26374834

Success of Urgent-Start Peritoneal Dialysis in a Large Canadian Renal Program.

PubMed

Alkatheeri, Ali M A; Blake, Peter G; Gray, Daryl; Jain, Arsh K

2016-01-01

♦ Many patients start renal replacement therapy urgently on in-center hemodialysis via a central venous catheter, which is considered suboptimal. An alternative approach to manage these patients is to start them on peritoneal dialysis (PD). In this report, we describe the first reported Canadian experience with an urgent-start PD program. Additionally we reviewed the literature in this area. ♦ In this prospective observational study, we report on our experience in a single academic center. This program started in July 2010. We included patients who initiated PD urgently, that is within 2 weeks of catheter insertion. We followed all incident PD patients until October 2013 for mechanical and infectious complications. Peritoneal dialysis catheters were inserted either percutaneously or laparoscopically and dialysis was initiated in either an inpatient or outpatient setting. ♦ Thirty patients were started on urgent PD during our study period. Follow-up ranged from 28 to 1,050 days. Twenty insertions (66.7%) were done percutaneously and 10 (33.3%) were laparoscopic. Dialysis was initiated within 2 weeks (range: 0-13 days, median = 6 days). Twenty-four patients (80%) started PD in an outpatient setting and 6 patients (20%) required immediate inpatient PD start. Three patients (10%) developed a minor peri-catheter leak during the first week of training that was managed conservatively. There were no episodes of peritonitis or exit-site/tunnel infection during the first 4 weeks post-insertion. Four patients (13.3%) from the percutaneous insertion group and 2 patients (6.7%) from laparoscopic insertions developed catheter dysfunction due to migration, which was managed by repositioning, without need for catheter replacement or modality switch. ♦ Our results are consistent with other studies in this area and demonstrate that urgent-start PD is an acceptable and safe alternative to hemodialysis in patients who need to start dialysis urgently without established dialysis access. Copyright © 2016 International Society for Peritoneal Dialysis.

Tritium well depth, tritium well time and sponge mechanism for reducing tritium retention

NASA Astrophysics Data System (ADS)

Deng, B. Q.; Li, Z. X.; Li, C. Y.; Feng, K. M.

2011-07-01

New simulation results are predicted in a fusion reactor operation process. They are somewhat similar to, but quite different from, the xenon poisoning effects resulting from fission-produced iodine during the restart-up process of a fission reactor. We obtained completely new results of tritium well depth and tritium well time in magnetic confinement fusion energy research area. This study is carried out to investigate the following: what will be the least amount of tritium storage required to start up a fusion reactor and how long the fusion reactor needs to be operated for achieving the tritium break-even during the initial start-up phase due to the finite tritium-breeding time, which is dependent on the tritium breeder, specific structure of the breeding zone, layout of the coolant flow pipes, tritium recovery scheme and applied extraction process, the tritium retention of plasma facing component (PFC) and other reactor components, unrecoverable tritium fraction in the breeder, leakage to the inertial gas container and the natural radioactive decay time constant. We describe these new issues and answer these problems by setting up and solving a set of equations, which are described by a dynamic subsystem model of tritium inventory evolution in a fusion experimental breeder (FEB). Reasonable results are obtained using our simulation model. It is found that the tritium well depth is about 0.319 kg and the tritium well time is approximately 235 full power operation days for the reference case of the designed FEB configuration, and it is also found that after one-year operation the tritium storage reaches 0.767 kg, which is more than the least amount of tritium storage required to start up another FEB-like fusion reactor. The results show that the tritium retention in the PFC is equivalent to 11.9% of tritium well depth that is fairly consistent with the result of 10-20% deduced from the integrated particle balance of European tokamaks. Based on our experimental and theoretical studies, some new mechanisms are proposed for reducing the tritium retention in PFC and structure materials of tritium-breeding blanket. In this paper, a qualitative analysis of the 'sponge effect' is carried out. The 'sponge effect' may help us to reduce tritium retention by ~20% in the PFC.

77 FR 25775 - Small Business Investment Companies-Early Stage SBICs

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-01

... of the Small Business Investment Company (``SBIC'') Management Assessment Questionnaire (``MAQ... expand entrepreneurs' access to capital and encourage innovation as part of President Obama's Start-Up... 18, 2012. Initial Review Period: Management Assessment 5 p.m. ET......... 5 p.m. ET. Questionnaires...

Application of the phase extension method in virus crystallography.

PubMed

Reddy, Vijay S

2016-01-01

The procedure for phase extension (PX) involves gradually extending the initial phases from low resolution (e.g., ~8Å) to the high-resolution limit of a diffraction data set. Structural redundancy present in the viral capsids that display icosahedral symmetry results in a high degree of non-crystallographic symmetry (NCS), which in turn translates into higher phasing power and is critical for improving and extending phases to higher resolution. Greater completeness of the diffraction data and determination of a molecular replacement solution, which entails accurately identifying the virus particle orientation(s) and position(s), are important for the smooth progression of the PX procedure. In addition, proper definition of a molecular mask (envelope) around the NCS-asymmetric unit has been found to be important for the success of density modification procedures, such as density averaging and solvent flattening. Regardless of the degree of NCS, the PX method appears to work well in all space groups, provided an accurate molecular mask is used along with reasonable initial phases. However, in the cases with space group P1, in addition to requiring a molecular mask, starting the phase extension at a higher resolution (e.g., 6Å) overcame the previously reported problems due to Babinet phases and phase flipping errors.

Non-isolated 30 kW class arcjet PCU

NASA Astrophysics Data System (ADS)

Wong, See-Pok; Britt, Edward J.

1994-03-01

A 30 kW class arcjet Power Conditioning Unit, PCU, was built and tested during this Phase 2 SBIR contract. The PCU is an improved version of two previously developed PCU's. All of these units are 3-phase, 20 kHz buck regulators with current mode feed back to modulate the duty cycle to control the arcjet current at any selected operating point. The steady state control can assure arcjet stability despite the negative dynamic resistance of the arc discharge. The system also has a circuit to produce a high voltage start pulse to breakdown the gas and initiate the arc. The start pulse is formed by temporarily switching a short current path across the output terminals with a special solid state switching array. The switches then open rapidly, and the energy stored in the output inductors of the buck regulator produces a pulse of approximately 2500 V for approximately 500 nsec. The system was tested and modified until the transition to steady operation occurred after start up with a very small surge current overshoot. The system also can withstand a direct short circuit across the output without damage. The automatic feed back control simply reduces the duty cycle to hold the current at the set point. When the short is removed the full power output is immediately restored. This latest version arcjet PCU is conduction cooled to remove waste heat by conduction to the base plate. This unit is closer to flight a type of design than the previous functional bread boards. Waste heat is small because the PCU has a very high efficiency, 296 percent. The PCU was extensively tested with resistor loads to simulate operation with an arcjet. The unit was tested with ammonia arcjets at the Jet Propulsion Laboratory. Approximately 400 hours of testing were completed, with several starts. Many hours were also demonstrated with resistive loads.

Non-isolated 30 kW class arcjet PCU

NASA Technical Reports Server (NTRS)

Wong, See-Pok; Britt, Edward J.

1994-01-01

A 30 kW class arcjet Power Conditioning Unit, PCU, was built and tested during this Phase 2 SBIR contract. The PCU is an improved version of two previously developed PCU's. All of these units are 3-phase, 20 kHz buck regulators with current mode feed back to modulate the duty cycle to control the arcjet current at any selected operating point. The steady state control can assure arcjet stability despite the negative dynamic resistance of the arc discharge. The system also has a circuit to produce a high voltage start pulse to breakdown the gas and initiate the arc. The start pulse is formed by temporarily switching a short current path across the output terminals with a special solid state switching array. The switches then open rapidly, and the energy stored in the output inductors of the buck regulator produces a pulse of approximately 2500 V for approximately 500 nsec. The system was tested and modified until the transition to steady operation occurred after start up with a very small surge current overshoot. The system also can withstand a direct short circuit across the output without damage. The automatic feed back control simply reduces the duty cycle to hold the current at the set point. When the short is removed the full power output is immediately restored. This latest version arcjet PCU is conduction cooled to remove waste heat by conduction to the base plate. This unit is closer to flight a type of design than the previous functional bread boards. Waste heat is small because the PCU has a very high efficiency, 296 percent. The PCU was extensively tested with resistor loads to simulate operation with an arcjet. The unit was tested with ammonia arcjets at the Jet Propulsion Laboratory. Approximately 400 hours of testing were completed, with several starts. Many hours were also demonstrated with resistive loads. Some testing with hydrogen arcjets was also carried out at NASA LeRC. This system concept is now the design base for the ATTD program.

Development and Validation of a Learning Progression for Change of Seasons, Solar and Lunar Eclipses, and Moon Phases

ERIC Educational Resources Information Center

Testa, Italo; Galano, Silvia; Leccia, Silvio; Puddu, Emanuella

2015-01-01

In this paper, we report about the development and validation of a learning progression about the Celestial Motion big idea. Existing curricula, research studies on alternative conceptions about these phenomena, and students' answers to an open questionnaire were the starting point to develop initial learning progressions about change of seasons,…

Chk1 promotes replication fork progression by controlling replication initiation

PubMed Central

Petermann, Eva; Woodcock, Mick; Helleday, Thomas

2010-01-01

DNA replication starts at initiation sites termed replication origins. Metazoan cells contain many more potential origins than are activated (fired) during each S phase. Origin activation is controlled by the ATR checkpoint kinase and its downstream effector kinase Chk1, which suppresses origin firing in response to replication blocks and during normal S phase by inhibiting the cyclin-dependent kinase Cdk2. In addition to increased origin activation, cells deficient in Chk1 activity display reduced rates of replication fork progression. Here we investigate the causal relationship between increased origin firing and reduced replication fork progression. We use the Cdk inhibitor roscovitine or RNAi depletion of Cdc7 to inhibit origin firing in Chk1-inhibited or RNAi-depleted cells. We report that Cdk inhibition and depletion of Cdc7 can alleviate the slow replication fork speeds in Chk1-deficient cells. Our data suggest that increased replication initiation leads to slow replication fork progression and that Chk1 promotes replication fork progression during normal S phase by controlling replication origin activity. PMID:20805465

Phase seeding of a terahertz quantum cascade laser

PubMed Central

Oustinov, Dimitri; Jukam, Nathan; Rungsawang, Rakchanok; Madéo, Julien; Barbieri, Stefano; Filloux, Pascal; Sirtori, Carlo; Marcadet, Xavier; Tignon, Jérôme; Dhillon, Sukhdeep

2010-01-01

The amplification of spontaneous emission is used to initiate laser action. As the phase of spontaneous emission is random, the phase of the coherent laser emission (the carrier phase) will also be random each time laser action begins. This prevents phase-resolved detection of the laser field. Here, we demonstrate how the carrier phase can be fixed in a semiconductor laser: a quantum cascade laser (QCL). This is performed by injection seeding a QCL with coherent terahertz pulses, which forces laser action to start on a fixed phase. This permits the emitted laser field to be synchronously sampled with a femtosecond laser beam, and measured in the time domain. We observe the phase-resolved buildup of the laser field, which can give insights into the laser dynamics. In addition, as the electric field oscillations are directly measured in the time domain, QCLs can now be used as sources for time-domain spectroscopy. PMID:20842195

New-onset diabetes after hemodialysis initiation: impact on survival.

PubMed

Salifu, Moro O; Abbott, Kevin C; Aytug, Serhat; Hayat, Amir; Haria, Dhiren M; Shah, Syed; Friedman, Eli A; Delano, Barbara G; McFarlane, Samy I; Hurst, Frank P; Flom, Peter L; Jindal, Rahul M

2010-01-01

The incidence of new-onset diabetes after initiation of hemodialysis (NODAD) and its impact on survival is not known. We used data from the United States Renal Data System (USRDS) from January 2000 to December 2001, with at least 3 years of follow-up for this study. Patients aged 18-80 years were included. NODAD was defined as two Medicare institutional claims for diabetes in patients with no history of diabetes prior to starting hemodialysis (HD). Incidence (per 1,000 patient-years), prevalence (%) and hazard ratios for mortality in patients with NODAD were calculated. There were 59,340 incident patients with no history of diabetes prior to starting HD, of which 3,853 met criteria for NODAD. The overall incidence and prevalence of NODAD were 20 per 1,000 patient-years and 7.6%, respectively. In a cohort of 444 patients without diabetes and documented glycosylated hemoglobin A1c, <6% prior to starting HD (from January 2005 and March 2006), at a mean follow-up of 4.7 +/- 2.6 months, 6.8% developed NODAD defined by two Medicare claims for diabetes after initiation of HD. NODAD was associated with a significantly increased risk of death as compared to non-diabetes patients (hazard ratio 1.20, 95% confidence interval 1.14-1.25). The USRDS showed a high incidence of NODAD, associated with significantly higher mortality compared to those who did not develop NODAD. The mechanism of NODAD needs to be explored further in experimental and clinical studies. 2010 S. Karger AG, Basel.

Decline in spirometric variables in grain workers from start of employment: differential effect of duration of follow up.

PubMed Central

Zejda, J E; Pahwa, P; Dosman, J A

1992-01-01

Prospective study of 164 young men from the start of employment in grain elevators showed that of those seen at the initial evaluation of respiratory state only 30% were available for a complete four year follow up. The drop out of subjects could represent a health related selection leading to the underestimation of respiratory effects of exposure to grain dust as assessed in the survivor group. This hypothesis was examined by comparisons of longitudinal changes in lung function in four groups defined by the duration of follow up involving the initial examination and periodic evaluations after one, two, and four years of work. Sixty four men were tested only on the initial examination (group I), 18 underwent two (group II), 31 underwent three (group III), and 51 (group IV) all four examinations. The groups had similar mean ages (range: 19.4-20.1 years), mean duration of previous exposure to grain dust (range: 8-13 weeks), smoking habits, lung function, and prevalences of respiratory symptoms evaluated on the initial occasion. The average decline in lung function over the first year was associated with duration of follow up. The annual decline in FVC (ml) was 58 in group II, 41 in group III and -55 (increase) in group IV; the decline in FEV1 (ml) was 224, 130, and 70 respectively. The differences for the annual declines of FEV1, FEF25-759 Vmax509 and Vmax25 were significant between groups II and IV, and the FEF25-759 Vmax509 and Vmax25 differed significantly between groups II and III. The results show that the restriction of analysis to the survivors may underestimate the relation between work and respiratory impairment. PMID:1515349

Recurrent Activity in Radio Galaxies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jamrozy, Marek; /Jagiellonian U.; Konar, Chiranjib

2007-10-15

One of the outstanding issues concerning extragalactic radio sources is the total duration of their active phase and the possible existence of duty cycles of their nuclear activity. A duty cycle can be recognized if there is a mechanism which preserves the information of past activity for a sufficiently long time after a new activity has started up. If a new cycle starts before the radio lobes created during a former activity period have faded, we can recognize this by the observations of a young radio source embedded in an old relic structure.

Same day ART initiation versus clinic-based pre-ART assessment and counselling for individuals newly tested HIV-positive during community-based HIV testing in rural Lesotho - a randomized controlled trial (CASCADE trial).

PubMed

Labhardt, Niklaus Daniel; Ringera, Isaac; Lejone, Thabo Ishmael; Masethothi, Phofu; Thaanyane, T'sepang; Kamele, Mashaete; Gupta, Ravi Shankar; Thin, Kyaw; Cerutti, Bernard; Klimkait, Thomas; Fritz, Christiane; Glass, Tracy Renée

2016-04-14

Achievement of the UNAIDS 90-90-90 targets in Sub-Sahara Africa is challenged by a weak care-cascade with poor linkage to care and retention in care. Community-based HIV testing and counselling (HTC) is widely used in African countries. However, rates of linkage to care and initiation of antiretroviral therapy (ART) in individuals who tested HIV-positive are often very low. A frequently cited reason for non-linkage to care is the time-consuming pre-ART assessment often requiring several clinic visits before ART-initiation. This two-armed open-label randomized controlled trial compares in individuals tested HIV-positive during community-based HTC the proposition of same-day community-based ART-initiation to the standard of care pre-ART assessment at the clinic. Home-based HTC campaigns will be conducted in catchment areas of six clinics in rural Lesotho. Households where at least one individual tested HIV positive will be randomized. In the standard of care group individuals receive post-test counselling and referral to the nearest clinic for pre-ART assessment and counselling. Once they have started ART the follow-up schedule foresees monthly clinic visits. Individuals randomized to the intervention group receive on the spot point-of-care pre-ART assessment and adherence counselling with the proposition to start ART that same day. Once they have started ART, follow-up clinic visits will be less frequent. First primary outcome is linkage to care (individual presents at the clinic at least once within 3 months after the HIV test). The second primary outcome is viral suppression 12 months after enrolment in the study. We plan to enrol a minimum of 260 households with 1:1 allocation and parallel assignment into both arms. This trial will show if in individuals tested HIV-positive during community-based HTC campaigns the proposition of same-day ART initiation in the community, combined with less frequent follow-up visits at the clinic could be a pragmatic approach to improve the care cascade in similar settings. NCT02692027 , registered February 21, 2016.

Development and Initial Validation of the Five-Factor Model Adolescent Personality Questionnaire (FFM-APQ).

PubMed

Rogers, Mary E; Glendon, A Ian

2018-01-01

This research reports on the 4-phase development of the 25-item Five-Factor Model Adolescent Personality Questionnaire (FFM-APQ). The purpose was to develop and determine initial evidence for validity of a brief adolescent personality inventory using a vocabulary that could be understood by adolescents up to 18 years old. Phase 1 (N = 48) consisted of item generation and expert (N = 5) review of items; Phase 2 (N = 179) involved item analyses; in Phase 3 (N = 496) exploratory factor analysis assessed the underlying structure; in Phase 4 (N = 405) confirmatory factor analyses resulted in a 25-item inventory with 5 subscales.

Impact of high initial concentrations of acetic acid and ethanol on acetification rate in an internal Venturi injector bioreactor.

PubMed

Krusong, W; Yaiyen, S; Pornpukdeewatana, S

2015-03-01

To evaluate the comparative impact of high initial concentrations of acetic acid (AAi ) and of ethanol (ETi ) on acetification rate (ETA). Acetic acid bacteria (AAB) were cultivated in a 100-l internal Venturi injector bioreactor. To quantify the oxygen availability, the 1.0 l min(-1) air inflow rate for the start-up phase (25 l) while 3·0 l min(-1) for the operational phase (75 l) achieved a high oxygen transfer coefficient (kL a). Changes in cell wall by TEM images and the remained ADH and ALDH activities confirmed the high acid tolerance ability of AAB. While ETAs using high AAi at 65 g l(-1) could be processed of 9.57 ± 0.19 g l(-1) day(-1) , which is just higher than 9.12 ± 0.12 g l(-1) day(-1) using high ETi at 55 g l(-1) . The average biotransformation yields were at 96.3 ± 0.1% and 94.4 ± 0.1% for high AAi and ETi , respectively. Results confirm that high oxygenation was generated in the bioreactor. Both high AAi and ETi were important in increasing ETA under stress 100 g l(-1) total concentration. High acid-tolerant AAB contains the high ADH and ALDH activities causing higher ETAs in HIA process. It is a competitive commercialized acetification process. © 2014 The Society for Applied Microbiology.

Time-periodic solutions of the Benjamin-Ono equation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ambrose , D.M.; Wilkening, Jon

2008-04-01

We present a spectrally accurate numerical method for finding non-trivial time-periodic solutions of non-linear partial differential equations. The method is based on minimizing a functional (of the initial condition and the period) that is positive unless the solution is periodic, in which case it is zero. We solve an adjoint PDE to compute the gradient of this functional with respect to the initial condition. We include additional terms in the functional to specify the free parameters, which, in the case of the Benjamin-Ono equation, are the mean, a spatial phase, a temporal phase and the real part of one ofmore » the Fourier modes at t = 0. We use our method to study global paths of non-trivial time-periodic solutions connecting stationary and traveling waves of the Benjamin-Ono equation. As a starting guess for each path, we compute periodic solutions of the linearized problem by solving an infinite dimensional eigenvalue problem in closed form. We then use our numerical method to continue these solutions beyond the realm of linear theory until another traveling wave is reached (or until the solution blows up). By experimentation with data fitting, we identify the analytical form of the solutions on the path connecting the one-hump stationary solution to the two-hump traveling wave. We then derive exact formulas for these solutions by explicitly solving the system of ODE's governing the evolution of solitons using the ansatz suggested by the numerical simulations.« less

Kinetic parameters and nitrate, nitrite changes in bioremediation of Toxic Pentaerythritol Tetranitrate (PETN) contaminated soil

PubMed Central

Sadani, Mohsen; Karami, Mohammad Amin; Teimouri, Fahimeh; Amin, Mohammad Mehdi; Moosavi, Seyed Mahdi; Dehdashti, Bahare

2017-01-01

Background Cleanup of areas contaminated by explosives is a public health concern. Some explosives can be carcinogenic in humans. Pentaerythritol Tetranitrate (PETN), a powerful explosive with very low water solubility, can be easily transported to ground waters. Objective This study was conducted to determine the removal efficiencies of PETN from soil by bioremediation, and obtain kinetic parameters of biological process. Methods This experimental study was conducted at the Environmental Health Engineering Lab (Isfahan University of Medical Sciences, Isfahan, Iran) in 2015–2016. In the present work, bioremediation of the explosive-polluted soils by PETN in anaerobic-aerobic landfarming method was performed. The influence of seeding and biosurfactant addition on bioremediation was also evaluated. The data were analyzed using Microsoft Excel software. Results The results show that, as the initial concentration of PETN increased, the lag phase was increased and the specific growth rate was increased up to 0.1/day in concentration of 50 mg/kg, and then it was decreased to 0.04/day. Subsequent decreases in specific growth rate can cause substrate inhibition. Seeding causes decrease in lag phase significantly. Biosurfactant addition had little to no impact on the length of lag phase, but biosurfactant plus seeding can increase the growth rate to 0.2/day, however, inhibitory effect of the initial concentration was started in very high concentration of PETN (150 mg/kg). Conclusion Biosurfactant addition and seeding together have an impressive effect on biodegradation of PETN, furthermore seeding can enhance active microbial consortium and biosurfactant can improve the poor aqueous solubility of PETN, therefore making the substrate more accessible. PMID:29238507

Meteosat third generation: preliminary imagery and sounding mission concepts and performances

NASA Astrophysics Data System (ADS)

Aminou, Donny M.; Bézy, Jean-Loup; Bensi, Paolo; Stuhlmann, Rolf; Rodriguez, Antonio

2017-11-01

The operational deployment of MSG-1 at the beginning of 2004, the first of a series of four Meteosat Second Generation (MSG) satellites, marks the start of a new era in Europe for the meteorological observations from the geostationary orbit. This new system shall be the backbone of the European operational meteorological services up to at least 2015. The time required for the definition and the development of new space systems as well as the approval process of such complex programs implies to plan well ahead for the future missions. EUMETSAT have initiated in 2001, with ESA support, a User Consultation Process aiming at preparing for a future operational geostationary meteorological satellite system in the post-MSG era, named Meteosat Third Generation (MTG). The first phase of the User Consultation Process was devoted to the definition and consolidation of end user requirements and priorities in the field of Nowcasting and Very Short Term Weather Forecasting (NWC), Medium/Short Range global and regional Numerical Weather Prediction (NWP), Climate and Air Composition Monitoring and to the definition of the relevant observation techniques. After an initial post-MSG mission study (2003-2004) where preliminary instrument concepts were investigated allowing in the same time to consolidate the technical requirements for the overall system study, a MTG pre-phase A study has been performed for the overall system concept, architecture and programmatic aspects during 2004-2005 time frame. This paper provides an overview of the outcome of the MTG sensor concept studies conducted in the frame of the pre-phase A. It namely focuses onto the Imaging and Sounding Missions, highlights the resulting instrument concepts, establishes the critical technologies and introduces the study steps towards the implementation of the MTG development programme.

Phase I Trial Using Induction Ciplatin, Docetaxel, 5-FU and Erlotinib Followed by Cisplatin, Bevacizumab and Erlotinib With Concurrent Radiotherapy for Advanced Head and Neck Cancer.

PubMed

Ahn, Peter H; Machtay, Mitchell; Anne, Pramila R; Cognetti, David; Keane, William M; Wuthrick, Evan; Dicker, Adam P; Axelrod, Rita S

2018-05-01

Bevacizumab (avastin) and erlotinib (tarceva) had shown early clinical activity against head and neck cancer (HNC). We initiated a phase I trial of induction cisplatin, docetaxel, 5-fluorouracil and erlotinib (TPF-E) followed by cisplatin, bevacizumab and erlotinib (PA-E) with radiotherapy (XRT) for advanced HNC. The goal was to determine maximum tolerated erlotinib dose. Eligible patients had stage IVA or higher HNC with good performance status, hematologic, and renal reserve. Two cycles of induction TPF-E were administered. XRT was administered with concurrent weekly cisplatin and bevacizumab every 2 weeks. Initial erlotinib dose was 50 mg daily from start of induction chemotherapy until radiotherapy completion. Erlotinib dose escalations to 100 and 150 mg were planned. Thirteen patients with previously untreated locoregional disease (11 patients) or oligometastatic (2 patients) HNC were enrolled. Totally, 11 of 13 patients completed XRT as planned. Four of 8 patients in cohort 1 (erlotinib 50 mg), 3 of 4 patients in cohort 2 (100 mg), and 0 of 1 patients in cohort 3 (150 mg) completed the regimen. Two patients had significant gastrointestinal complications (bleeding and perforation), and 1 had dose-limiting diarrhea. Maximum tolerated dose was reached at 50 mg erlotinib. At median 23.4 months follow-up, 5 patients (38%) have no evidence of disease, and 2 (15%) have stable but measurable disease. Erlotinib in combination with induction TPF followed by erlotinib, cisplatin, and bevacizumab with XRT is active but toxic. Gastrointestinal toxicities partly caused high rates of study withdrawal. All doses studied in this protocol caused unexpected toxicities and we do not recommend advancement to phase II.

Loss to follow-up before and after initiation of antiretroviral therapy in HIV facilities in Lilongwe, Malawi.

PubMed

Tweya, Hannock; Oboho, Ikwo Kitefre; Gugsa, Salem T; Phiri, Sam; Rambiki, Ethel; Banda, Rebecca; Mwafilaso, Johnbosco; Munthali, Chimango; Gupta, Sundeep; Bateganya, Moses; Maida, Alice

2018-01-01

Although several studies have explored factors associated with loss to follow-up (LTFU) from HIV care, there remains a gap in understanding how these factors vary by setting, volume of patient and patients' demographic and clinical characteristics. We determined rates and factors associated with LTFU in HIV care Lilongwe, Malawi. We conducted a retrospective cohort study of HIV-infected individuals aged 15 years or older at the time of registration for HIV care in 12 ART facilities, between April 2012 and March 2013. HIV-positive individuals who had not started ART (pre-ART patients) were clinically assessed to determine ART eligibility at registration and during clinic follow-up visits. ART-eligible patients were initiated on triple antiretroviral combination. Study data were abstracted from patients' cards, facility ART registers or electronic medical record system from the date of registration for HIV care to a maximum follow-up period of 24 months. Descriptive statistics were undertaken to summarize characteristics of the study patients. Separate univariable and multivariable poisson regression models were used to explore factors associated with LTFU in pre-ART and ART care. A total of 10,812 HIV-infected individuals registered for HIV care. Of these patients, 1,907 (18%) and 8,905 (82%) enrolled in pre-ART and ART care, respectively. Of the 1,907 pre-ART patients, 490 (26%) subsequently initiated ART and were included in both the pre-ART and ART analyses. The LTFU rates among patients in pre-ART and ART care were 48 and 26 per 100 person-years, respectively. Of the 9,105 ART patients with reasons for starting ART, 2,451 (27%) were initiated on ART because of pregnancy or breastfeeding (Option B+) status. Multivariable analysis showed that being ≥35 years and female were associated with decreased risk of LTFU in the pre-ART and ART phases of HIV care. However, being in WHO clinical stage 3 (adjusted risk ratio (aRR) 1.35, 95% confidence interval (CI): 1.20-1.51) and stage 4 (aRR 1.87, 95% CI: 1.62-2.18), body mass index ≤ 18.4 (aRR 1.24, 95% CI: 1.11-1.39) at ART initiation, poor adherence to clinic appointments (aRR 4.55, 95% CI: 4.16-4.97) and receiving HIV care in rural facilities (aRR 2.32, 95% CI: 1.94-2.87) were associated with increased risk of LTFU among ART patients. Being re-initiated on ART once (aRR 0.20, 95% CI: 0.17-0.22), more than once (aRR 0.06, 95% CI: 0.05-0.07), and being enrolled at a low-volume facility (aRR 0.25, 95% CI: 0.20-0.30) were associated with decreased risk of LTFU from ART care. A sizeable proportion of ART LTFU occurred among women enrolled during pregnancy or breast-feeding. Non- compliance to clinic and receiving ART in a rural facility or high-volume facility were associated with increased risk of LTFU from ART care. Developing effective interventions that target high-risk subgroups and contexts may help reduce LTFU from HIV care.

Principles of fluid management and stewardship in septic shock: it is time to consider the four D's and the four phases of fluid therapy.

PubMed

Malbrain, Manu L N G; Van Regenmortel, Niels; Saugel, Bernd; De Tavernier, Brecht; Van Gaal, Pieter-Jan; Joannes-Boyau, Olivier; Teboul, Jean-Louis; Rice, Todd W; Mythen, Monty; Monnet, Xavier

2018-05-22

In patients with septic shock, the administration of fluids during initial hemodynamic resuscitation remains a major therapeutic challenge. We are faced with many open questions regarding the type, dose and timing of intravenous fluid administration. There are only four major indications for intravenous fluid administration: aside from resuscitation, intravenous fluids have many other uses including maintenance and replacement of total body water and electrolytes, as carriers for medications and for parenteral nutrition. In this paradigm-shifting review, we discuss different fluid management strategies including early adequate goal-directed fluid management, late conservative fluid management and late goal-directed fluid removal. In addition, we expand on the concept of the "four D's" of fluid therapy, namely drug, dosing, duration and de-escalation. During the treatment of patients with septic shock, four phases of fluid therapy should be considered in order to provide answers to four basic questions. These four phases are the resuscitation phase, the optimization phase, the stabilization phase and the evacuation phase. The four questions are "When to start intravenous fluids?", "When to stop intravenous fluids?", "When to start de-resuscitation or active fluid removal?" and finally "When to stop de-resuscitation?" In analogy to the way we handle antibiotics in critically ill patients, it is time for fluid stewardship.

The basic reproduction number R0 and effectiveness of reactive interventions during dengue epidemics: the 2002 dengue outbreak in Easter Island, Chile.

PubMed

Chowell, Gerardo; Fuentes, R; Olea, A; Aguilera, X; Nesse, H; Hyman, J M

2013-01-01

We use a stochastic simulation model to explore the effect of reactive intervention strategies during the 2002 dengue outbreak in the small population of Easter Island, Chile. We quantified the effect of interventions on the transmission dynamics and epidemic size as a function of the simulated control intensity levels and the timing of initiation of control interventions. Because no dengue outbreaks had been reported prior to 2002 in Easter Island, the 2002 epidemic provided a unique opportunity to estimate the basic reproduction number R0 during the initial epidemic phase, prior to the start of control interventions. We estimated R0 at 27.2 (95%CI: 14.8, 49.3). We found that the final epidemic size is highly sensitive to the timing of start of interventions. However, even when the control interventions start several weeks after the epidemic onset, reactive intervention efforts can have a significant impact on the final epidemic size. Our results indicate that the rapid implementation of control interventions can have a significant effect in reducing the epidemic size of dengue epidemics.

77 FR 74908 - Small Business Investment Companies-Early Stage SBICs

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-18

... President Obama's ``Start-Up America Initiative'' to promote American innovation and job creation by encouraging private sector investment in job-creating startups and small firms, accelerating research, and...). Applicants that do not address, to SBA's satisfaction, all of the comments contained in SBA's comment letter...

Coherent exciton transport in dendrimers and continuous-time quantum walks

NASA Astrophysics Data System (ADS)

Mülken, Oliver; Bierbaum, Veronika; Blumen, Alexander

2006-03-01

We model coherent exciton transport in dendrimers by continuous-time quantum walks. For dendrimers up to the second generation the coherent transport shows perfect recurrences when the initial excitation starts at the central node. For larger dendrimers, the recurrence ceases to be perfect, a fact which resembles results for discrete quantum carpets. Moreover, depending on the initial excitation site, we find that the coherent transport to certain nodes of the dendrimer has a very low probability. When the initial excitation starts from the central node, the problem can be mapped onto a line which simplifies the computational effort. Furthermore, the long time average of the quantum mechanical transition probabilities between pairs of nodes shows characteristic patterns and allows us to classify the nodes into clusters with identical limiting probabilities. For the (space) average of the quantum mechanical probability to be still or to be again at the initial site, we obtain, based on the Cauchy-Schwarz inequality, a simple lower bound which depends only on the eigenvalue spectrum of the Hamiltonian.

Objective Lightning Probability Forecasting for Kennedy Space Center and Cape Canaveral Air Force Station, Phase III

NASA Technical Reports Server (NTRS)

Crawford, Winifred C.

2010-01-01

The AMU created new logistic regression equations in an effort to increase the skill of the Objective Lightning Forecast Tool developed in Phase II (Lambert 2007). One equation was created for each of five sub-seasons based on the daily lightning climatology instead of by month as was done in Phase II. The assumption was that these equations would capture the physical attributes that contribute to thunderstorm formation more so than monthly equations. However, the SS values in Section 5.3.2 showed that the Phase III equations had worse skill than the Phase II equations and, therefore, will not be transitioned into operations. The current Objective Lightning Forecast Tool developed in Phase II will continue to be used operationally in MIDDS. Three warm seasons were added to the Phase II dataset to increase the POR from 17 to 20 years (1989-2008), and data for October were included since the daily climatology showed lightning occurrence extending into that month. None of the three methods tested to determine the start of the subseason in each individual year were able to discern the start dates with consistent accuracy. Therefore, the start dates were determined by the daily climatology shown in Figure 10 and were the same in every year. The procedures used to create the predictors and develop the equations were identical to those in Phase II. The equations were made up of one to three predictors. TI and the flow regime probabilities were the top predictors followed by 1-day persistence, then VT and Ll. Each equation outperformed four other forecast methods by 7-57% using the verification dataset, but the new equations were outperformed by the Phase II equations in every sub-season. The reason for the degradation may be due to the fact that the same sub-season start dates were used in every year. It is likely there was overlap of sub-season days at the beginning and end of each defined sub-season in each individual year, which could very well affect equation performance.

The experience of a nationwide Community of Practice to set up Regional Prevention Plans in Italy.

PubMed

Giusti, Angela; Perra, Alberto; Lombardo, Flavia

2017-07-27

In 2010, the Italian Ministry of Health decided to start the planning process to elaborate the National Plan of Prevention 2010-2012 jointly with the 21 Regions. The National Institute of Health was responsible for supporting regional planners (RPs) by an original participatory approach of a web-based Community of Practice (CoP) to set up their own Regional Plans of Prevention. In this paper, we summarise the theoretical framework adopted, the main phases characterising the lifecycle of the nationwide CoP, the evaluation approach adopted and its findings. Following the CoP theoretical framework from Wenger, an initial group of RPs were trained on Project Cycle Management as a planning method and thereafter they started interacting on a web-based Moodle platform for 8 months. The CoP evaluation mainly took into account aspects of 'immediate value', such as members interactions within the website, and several quantitative and qualitative tools were used to monitor changes over time. Data were retrieved from Moodle statistics or directly from the RPs by the means of a Knowledge, Attitude and Practice survey, a reaction survey, SWOT analysis and focus groups. The level of individual RPs knowledge increased after the initial course from 55.7% to 75%, attitudes and competence perception about the planning process method also showed an overall favourable change. During the CoP life span, the number of members increased from the original 98 RPs to include up to 600 new members on the basis of spontaneous demand. From April 2010 to January 2011, the 'vital signs' of the CoP were monitored, including RP logins (13,450 total logins and 3744 unique logins), views (27,522) and posts (1606) distributed in 326 forum discussion threads. Data and information retrieved from quantitative and qualitative evaluation approaches proved to be useful for the management and follow-up of the CoP. The CoP experience was successful as 19 out of 20 Regions submitted their Regional Preventive Plan to their Ministry of Health within the due deadline. The CoP has proved to be an approach able to optimise resources and expertise, capitalising and generating new knowledge. However, more efforts should be deployed to define innovative ways to evaluate its values, tangible and intangible, as well as the return of investment.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Milosevic, Michael F., E-mail: mike.milosevic@rmp.uhn.ca; Department of Radiation Oncology, University of Toronto, Toronto; Townsley, Carol A.

Purpose: Preclinical studies have shown that angiogenesis inhibition can improve response to radiation therapy (RT). The purpose of this phase 1 study was to examine the angiogenesis inhibitor sorafenib in patients with cervical cancer receiving radical RT and concurrent cisplatin (RTCT). Methods and Materials: Thirteen patients with stage IB to IIIB cervical cancer participated. Sorafenib was administered daily for 7 days before the start of standard RTCT in patients with early-stage, low-risk disease and also during RTCT in patients with high-risk disease. Biomarkers of tumor vascularity, perfusion, and hypoxia were measured at baseline and again after 7 days of sorafenib alone beforemore » the start of RTCT. The median follow-up time was 4.5 years. Results: Initial complete response was seen in 12 patients. One patient died without achieving disease control, and 4 experienced recurrent disease. One patient with an extensive, infiltrative tumor experienced pelvic fistulas during treatment. The 4-year actuarial survival was 85%. Late grade 3 gastrointestinal toxicity developed in 4 patients. Sorafenib alone produced a reduction in tumor perfusion/permeability and an increase in hypoxia, which resulted in early closure of the study. Conclusions: Sorafenib increased tumor hypoxia, raising concern that it might impair rather than improve disease control when added to RTCT.« less

Observations of low-energy ions with Arase/LEPi

NASA Astrophysics Data System (ADS)

Yoshizumi, M.; Asamura, K.; Kazama, Y.; Yokota, S.; Kasahara, S.

2017-12-01

LEPi is one of the instruments onboard Arase, which is an energy-mass spectrometer designed to measure ions with energies from 0.01keV/q up to 25keV/q. In order to discriminate species of incoming ions, LEPi uses a TOF (Time-Of-Flight) technique. TOF also works as a noise rejector, which is useful for rejection of background noise due to high energy particles in the inner magnetosphere. LEPi has passed the initial checkout phase after launch, and now under regular observations. Since the regular observation started (end of March, 2017), Arase encountered several magnetic storms driven by CIR and CMEs. LEPi observed sudden flux enhancement and subsequent gradual decay of low-energy ( 10eV/q) ions around L=4 associated with the magnetic storms. In some cases, these flux modulations coinside with eclipse (absent of Sun light on the spacecraft), but others do not. Spacecraft potential decreases when the spacecraft gets eclipse. Therefore, a part of ions whose enegies are lower than energy range of LEPi are accelerated and appeared in the range. These fluxes might reflect transportation / energization of cold component in the inner magnetosphere. We will present current LEPi operations and initial scientific results.

Attrition and erosion: restorative planning and performance.

PubMed

Burrow, Michael F

2012-04-01

The number of patients presenting with severe attrition and associated erosion is increasing in frequency. Treatment of this patient group is very challenging as it is simply not just a case of replacing lost tooth tissue, but also trying to identify and then eliminate the aetiological factors responsible for the loss of tooth structure. In most cases restorative treatment involves extensive rehabilitation of the dentition to restore the aesthetics and function and also to prevent further tooth loss. Such treatment often involves a multidisciplinary approach to eliminate and/or reduce causative factors prior to definitive restoration of teeth. Treatment needs to focus on quick intervention when the problem has been identified and diagnosed. Restorative treatment involves careful if not complex planning culminating in the establishment of a well defined and ongoing maintenance plan. Long-term success of treatment is centred on the maintenance phase. Current restorative options include the use of extensive resin composite build-ups. This is often the best initial starting point as it allows for adjustments, as well as being a reversible and more conservative procedure. The use of indirect restorations is likely to provide a longer lasting outcome after initial stabilization, whether it is metal- or ceramic-based or a combination.

Ultrafast Beam Filamentation: Spatio-Temporal Characterization and Control

DTIC Science & Technology

2013-11-01

measurement of spectral phase[7]. The output of the laser passes through a BK7 plate set at a Brewster angle to clean up the polarization of the beam...at the focus of a lens . In this configuration, the pulse focuses temporally and spatially at the same time. We developed a theory for understanding...focus by shaping only the spatial phase of the starting beam. Finally, we showed for the first time that Kerr- lens modelocking can be achieved in a Ti

Effects of Antiretroviral Therapy and Depressive Symptoms on All-Cause Mortality Among HIV-Infected Women.

PubMed

Todd, Jonathan V; Cole, Stephen R; Pence, Brian W; Lesko, Catherine R; Bacchetti, Peter; Cohen, Mardge H; Feaster, Daniel J; Gange, Stephen; Griswold, Michael E; Mack, Wendy; Rubtsova, Anna; Wang, Cuiwei; Weedon, Jeremy; Anastos, Kathryn; Adimora, Adaora A

2017-05-15

Depression affects up to 30% of human immunodeficiency virus (HIV)-infected individuals. We estimated joint effects of antiretroviral therapy (ART) initiation and depressive symptoms on time to death using a joint marginal structural model and data from a cohort of HIV-infected women from the Women's Interagency HIV Study (conducted in the United States) from 1998-2011. Among 848 women contributing 6,721 years of follow-up, 194 participants died during follow-up, resulting in a crude mortality rate of 2.9 per 100 women-years. Cumulative mortality curves indicated greatest mortality for women who reported depressive symptoms and had not initiated ART. The hazard ratio for depressive symptoms was 3.38 (95% confidence interval (CI): 2.15, 5.33) and for ART was 0.47 (95% CI: 0.31, 0.70). Using a reference category of women without depressive symptoms who had initiated ART, the hazard ratio for women with depressive symptoms who had initiated ART was 3.60 (95% CI: 2.02, 6.43). For women without depressive symptoms who had not started ART, the hazard ratio was 2.36 (95% CI: 1.16, 4.81). Among women reporting depressive symptoms who had not started ART, the hazard ratio was 7.47 (95% CI: 3.91, 14.3). We found a protective effect of ART initiation on mortality, as well as a harmful effect of depressive symptoms, in a cohort of HIV-infected women. © The Author 2017. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Decadal climate predictions improved by ocean ensemble dispersion filtering

NASA Astrophysics Data System (ADS)

Kadow, C.; Illing, S.; Kröner, I.; Ulbrich, U.; Cubasch, U.

2017-06-01

Decadal predictions by Earth system models aim to capture the state and phase of the climate several years in advance. Atmosphere-ocean interaction plays an important role for such climate forecasts. While short-term weather forecasts represent an initial value problem and long-term climate projections represent a boundary condition problem, the decadal climate prediction falls in-between these two time scales. In recent years, more precise initialization techniques of coupled Earth system models and increased ensemble sizes have improved decadal predictions. However, climate models in general start losing the initialized signal and its predictive skill from one forecast year to the next. Here we show that the climate prediction skill of an Earth system model can be improved by a shift of the ocean state toward the ensemble mean of its individual members at seasonal intervals. We found that this procedure, called ensemble dispersion filter, results in more accurate results than the standard decadal prediction. Global mean and regional temperature, precipitation, and winter cyclone predictions show an increased skill up to 5 years ahead. Furthermore, the novel technique outperforms predictions with larger ensembles and higher resolution. Our results demonstrate how decadal climate predictions benefit from ocean ensemble dispersion filtering toward the ensemble mean.