Correction of Retrograde Ejaculation in Patients with Diabetes Mellitus Using Endourethral Collagen Injection: Preliminary Results.

PubMed

Kurbatov, Dmitry; Russo, Giorgio Ivan; Galstyan, G R; Rozhivanov, Roman; Lepetukhin, Alexander; Dubsky, Sergey; Shwartz, Y G; Cimino, Sebastiano; Morgia, Giuseppe; Sansalone, Salvatore

2015-11-01

Diabetic neuropathy secondary to diabetes mellitus type 1 (DM1) is responsible for retrograde ejaculation (RE) in 5-18% of cases. Medical treatment of RE is based either on increasing the sympathetic tone of the bladder or on decreasing the parasympathetic activity. However, the onset of side effects and the lack of response should be considered. The aim of this study was to analyze long-term outcome of endourethral injection of volume-forming material (VFM) of collagen type 2 into bladder neck submucosa in patients with RE secondary to DM1. Twenty-four patients with complete RE refractory to imipramine and DM1 were included in the study. Patients were single-blinded randomized according to a computer-generated random sequence with a 1:1 ratio in two treatment groups, namely group A (endourethral collage type 2 injection) and group B (endourethral saline water injection). New technique includes an endoscopic injection of VFM such as collagen (Correcting MIT®, Ltd. minimally invasive technologies, Moscow, Russia) into bladder neck submucosa. Primary endpoint of the study was the reduction of semen antegrade volume (mL). Secondary endpoints were considered as the changes of antegrade count (millions/mL), antegrade total motility (%), antegrade progressive motility (%), State-Trait Anxiety Inventory, Beck Depression Questionnaire and International Index of Erectile Function (IIEF-5). Pregnancy rate was calculated in each group. Twenty-three patients completed the study. In group A, significant differences from baseline to 12 months were observed relative to antegrade volume (mL) (mean difference: 0.71, P < 0.05), antegrade count (millions/mL) (mean difference: 45.6, P < 0.05), antegrade total motility (%) (mean difference: 15.4, P < 0.05) and antegrade progressive motility (%) (mean difference: 8.4, P < 0.05). In group A, we observed significant differences in terms State-Trait Anxiety Inventory (mean difference: -20.5, P < 0.05) and Beck Depression Inventory (mean difference: -8.4, P < 0.05) with significant differences compared with group B. We observed significant improvements in group A vs. group B when considering primary and secondary endpoints of the study, but not for the IIEF-5. Correction of RE in DM1 patients could be achieved with endourethral injection of collagen type 2. © 2015 International Society for Sexual Medicine.

Survey of Botulinum Toxin Injections in Anticoagulated Patients: Korean Physiatrists' Preference in Controlling Anticoagulation Profile Prior to Intramuscular Injection.

PubMed

Jang, Yongjun; Park, Geun-Young; Park, Jihye; Choi, Asayeon; Kim, Soo Yeon; Boulias, Chris; Phadke, Chetan P; Ismail, Farooq; Im, Sun

2016-04-01

To evaluate Korean physiatrists' practice of performing intramuscular botulinum toxin injection in anticoagulated patients and to assess their preference in controlling the bleeding risk before injection. As part of an international collaboration survey study, a questionnaire survey was administered to 100 Korean physiatrists. Physiatrists were asked about their level of experience with botulinum toxin injection, the safe international normalized ratio range in anticoagulated patients undergoing injection, their tendency for injecting into deep muscles, and their experience of bleeding complications. International normalized ratio <2.0 was perceived as an ideal range for performing Botulinum toxin injection by 41% of the respondents. Thirty-six respondents replied that the international normalized ratio should be lowered to sub-therapeutic levels before injection, and 18% of the respondents reported that anticoagulants should be intentionally withheld and discontinued prior to injection. In addition, 20%-30% of the respondents answered that they were uncertain whether they should perform the injection regardless of the international normalized ratio values. About 69% of the respondents replied that they did have any standardized protocols for performing botulinum toxin injection in patients using anticoagulants. Only 1 physiatrist replied that he had encountered a case of compartment syndrome. In accordance with the lack of consensus in performing intramuscular botulinum toxin injection in anticoagulated patients, our survey shows a wide range of practices among many Korean physiatrists; they tend to avoid botulinum toxin injection in anticoagulated patients and are uncertain about how to approach these patients. The results of this study emphasize the need for formulating a proper international consensus on botulinum toxin injection management in anticoagulated patients.

Interface states and internal photoemission in p-type GaAs metal-oxide-semiconductor surfaces

NASA Technical Reports Server (NTRS)

Kashkarov, P. K.; Kazior, T. E.; Lagowski, J.; Gatos, H. C.

1983-01-01

An interface photodischarge study of p-type GaAs metal-oxide-semiconductor (MOS) structures revealed the presence of deep interface states and shallow donors and acceptors which were previously observed in n-type GaAs MOS through sub-band-gap photoionization transitions. For higher photon energies, internal photoemission was observed, i.e., injection of electrons to the conduction band of the oxide from either the metal (Au) or from the GaAs valence band; the threshold energies were found to be 3.25 and 3.7 + or - 0.1 eV, respectively. The measured photoemission current exhibited a thermal activation energy of about 0.06 eV, which is consistent with a hopping mechanism of electron transport in the oxide.

Use of botulinum toxin type A in the management of neonatal brachial plexus palsy.

PubMed

Michaud, Linda J; Louden, Emily J; Lippert, William C; Allgier, Allison J; Foad, Susan L; Mehlman, Charles T

2014-12-01

To evaluate functional outcomes and the impact on surgical interventions after the use of botulinum neurotoxin type A (BoNT-A) for muscle imbalance, cocontractions, or contractures with neonatal brachial plexus palsy. A retrospective cohort study. A brachial plexus center in a tertiary children's hospital. Fifty-nine patients with neonatal brachial plexus palsy (75 injection procedures, 91 muscles and/or muscle groups) received BoNT-A injections (mean age at injection, 36.2 months; range, 6-123 months; 31 boys; 30 right-sided injuries, 28 left-sided injuries, 1 bilateral injury). Data collected retrospectively from medical records, from procedure notes and clinic visits before BoNT-A use, at ≤6 months follow-up (BoNT-A active [BA]) and at ≥7 months follow-up (BoNT-A not active [BNA]) included demographics, injection indication, side, and site(s), previous surgical history, occupational therapy and/or physical therapy plan, and outcome measurements. Outcomes assessed before and after injections included active and passive range of motion, Mallet and Toronto scores, parent comments about arm function, preinjection surgical considerations, and postinjection surgical history. Injection procedures included 51 to shoulder internal rotators, 15 triceps, 15 pronator teres, 9 biceps, and 1 flexor carpi ulnaris. Active and passive shoulder external rotation (SER) range of motion improved after shoulder internal rotator injections (P = .0003 and P = .002, respectively), as did Mallet scores with BA; the latter were sustained with BNA. Surgical intervention was averted, modified, or deferred after BoNT-A in 45% (n = 20) under surgical consideration before BoNT-A. Active elbow flexion improved in 67% (P = .005), sustained BNA (P = .004) after triceps injections; 2 of 7 patients averted surgery. Active supination improved with BA (P = .002), with gains sustained BNA (P = .016). Passive elbow extension improved after biceps injections by an average 17° (P = .004) BA, although not sustained BNA. BoNT-A is an effective adjunct to therapy and surgery in managing muscle imbalance, cocontractions, and contractures in neonatal brachial plexus palsy. Use of BoNT-A can result in averting, modifying, or deferring surgical interventions in a number of affected children. Copyright © 2014 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.

Lepromatous leprosy treated with combined chemotherapy and immunotherapy (injection BCG): three case reports.

PubMed

Lakshmi, Chembolli; Srinivas, Chakravarthi Rangachari

2014-01-01

Lepromatous leprosy is associated with suppressed cell-mediated immunity (CMI). This results in failure of the body to mount an efficient immune response and may render chemotherapy ineffective. The lack of sufficient response may mimic drug resistance. Three case reports in which the immunity was stimulated by administering Injection BCG are presented. All three patients were initially anergic and showed no reaction at the Mantoux testing site, showing an inability to mount type IV hypersensitivity and characterized by live bacilli in smears. Following 1-4 doses of Injection BCG, all three showed dead bacilli in smears. The first case, a 61-year-old man with lepromatous leprosy who continued to show live bacilli in smears after prolonged chemotherapy, was administered a total of four BCG injections, following which he achieved clearance. The second, a 40-year-old man with borderline lepromatous leprosy and severe type 2 reactions, achieved bacterial clearance and control of severe reactions following a single injection. The third, a 67-year-old man with histoid leprosy, achieved effective bacterial killing with a single dose of Injection BCG. All three patients achieved good results when chemotherapy was combined with Injection BCG. Following Injection BCG, all three showed a reaction at the Mantoux testing site. Suppressed CMI may be responsible for the lack of response in recalcitrant cases of lepromatous leprosy. These case reports would lead to the trend in combination therapy (immunotherapy combined with chemotherapy) for such cases, and help lower the tendency for inappropriate diagnosis of drug-resistant leprosy. © 2013 The International Society of Dermatology.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pamminger, Michael; Sevik, James; Scarcelli, Riccardo

The compression ratio is a strong lever to increase the efficiency of an internal combustion engine. However, among others, it is limited by the knock resistance of the fuel used. Natural gas shows a higher knock resistance compared to gasoline, which makes it very attractive for use in internal combustion engines. The current paper describes the knock behavior of two gasoline fuels, and specific incylinder blend ratios with one of the gasoline fuels and natural gas. The engine used for these investigations is a single cylinder research engine for light duty application which is equipped with two separate fuel systems.more » Both fuels can be used simultaneously which allows for gasoline to be injected into the intake port and natural gas to be injected directly into the cylinder to overcome the power density loss usually connected with port fuel injection of natural gas. Adding natural gas at wide open throttle helps to reduce knock mitigating measures and increases the efficiency and power density compared to the other gasoline type fuels with lower knock resistance. The used methods, knock intensity and number of pressure waves, do not show significant differences in knock behavior for the natural gas - gasoline blends compared to the gasoline type fuels. A knock integral was used to describe the knock onset location of the fuels tested. Two different approaches were used to determine the experimental knock onset and were compared to the knock onset delivered by the knock integral (chemical knock onset). The gasoline type fuels show good agreement between chemical and experimental knock onset. However, the natural gas -gasoline blends show higher discrepancies comparing chemical and experimental knock onset.« less

Inflammatory responses and side effects generated by several adjuvant-containing vaccines in turbot.

PubMed

Noia, M; Domínguez, B; Leiro, J; Blanco-Méndez, J; Luzardo-Álvarez, A; Lamas, J

2014-05-01

Several of the adjuvants used in fish vaccines cause adhesions in internal organs when they are injected intraperitoneally. We describe the damage caused by vaccines containing different adjuvants in the turbot Scophthalmus maximus and show that internal adhesions can be greatly reduced by injecting the fish in a specific way. Injection of fish with the needle directed towards the anterior part of the peritoneal cavity induced formation of a single cell-vaccine mass (CVM) that became attached to the parietal peritoneum. However, injection of the fish with the needle pointing in the opposite direction generated many small CVM that became attached to the visceral and parietal peritoneum and in some cases caused internal adhesions. We describe the structural and cellular changes in the adjuvant-induced CVMs. The CVMs mainly comprised neutrophils and macrophages, although most of the former underwent apoptosis, which was particularly evident from day 3 post-injection. The apoptotic cells were phagocytosed by macrophages, which were the dominant cell type from the first days onwards. All of the vaccines induced angiogenesis in the area of contact between the CVM and the mesothelium. Vaccines containing oil-based adjuvants or microspheres induced the formation of granulomas in the CVM; however, no granulomas were observed in the CVM induced by vaccines containing aluminium hydroxide or Matrix-Q(®) as adjuvants. All of the vaccines induced strong migration of cells to the peritoneal cavity. Although some of these cells remained unattached in the peritoneal cavity, most of them formed part of the CVM. We also observed migration of the cells from the peritoneal cavity to lymphoid organs, indicating bidirectional traffic of cells between the inflamed areas and these organs. Copyright © 2014 Elsevier Ltd. All rights reserved.

Effect of aviation fuel type and fuel injection conditions on the spray characteristics of pressure swirl and hybrid air blast fuel injectors

NASA Astrophysics Data System (ADS)

Feddema, Rick

Feddema, Rick T. M.S.M.E., Purdue University, December 2013. Effect of Aviation Fuel Type and Fuel Injection Conditions on the Spray Characteristics of Pressure Swirl and Hybrid Air Blast Fuel Injectors. Major Professor: Dr. Paul E. Sojka, School of Mechanical Engineering Spray performance of pressure swirl and hybrid air blast fuel injectors are central to combustion stability, combustor heat management, and pollutant formation in aviation gas turbine engines. Next generation aviation gas turbine engines will optimize spray atomization characteristics of the fuel injector in order to achieve engine efficiency and emissions requirements. Fuel injector spray atomization performance is affected by the type of fuel injector, fuel liquid properties, fuel injection pressure, fuel injection temperature, and ambient pressure. Performance of pressure swirl atomizer and hybrid air blast nozzle type fuel injectors are compared in this study. Aviation jet fuels, JP-8, Jet A, JP-5, and JP-10 and their effect on fuel injector performance is investigated. Fuel injector set conditions involving fuel injector pressure, fuel temperature and ambient pressure are varied in order to compare each fuel type. One objective of this thesis is to contribute spray patternation measurements to the body of existing drop size data in the literature. Fuel droplet size tends to increase with decreasing fuel injection pressure, decreasing fuel injection temperature and increasing ambient injection pressure. The differences between fuel types at particular set conditions occur due to differences in liquid properties between fuels. Liquid viscosity and surface tension are identified to be fuel-specific properties that affect the drop size of the fuel. An open aspect of current research that this paper addresses is how much the type of aviation jet fuel affects spray atomization characteristics. Conventional aviation fuel specifications are becoming more important with new interest in alternative fuels. Optical patternation data and line of sight laser diffraction data show that there is significant difference between jet fuels. Particularly at low fuel injection pressures (0.345 MPa) and cold temperatures (-40 C), the patternation data shows that the total surface area in the spray at 38.1 mm from the pressure swirl injector for the JP-10 fuel type is one-sixth the amount of the JP-8. Finally, this study compares the atomizer performance of a pressure swirl nozzle to a hybrid air blast nozzle. The total surface area for both the hybrid air blast nozzle and the pressure swirl nozzle show a similar decline in atomization performance at low fuel injection pressures and cold temperatures. However, the optical patternator radial profile data and the line of sight laser diffraction data show that the droplet size and spray distribution data are less affected by injection conditions and fuel type in the hybrid air blast nozzle, than they are in the pressure swirl nozzle. One explanation is that the aerodynamic forces associated with the swirler on the hybrid air blast nozzle control the distribution droplets in the spray. This is in contrast to the pressure swirl nozzle droplet distribution that is controlled by internal geometry and droplet ballistics.

Comparison of bone cancer risks in beagle dogs for inhaled plutonium-238 dioxide, inhaled strontium-90 chloride, and injected strontium-90

DOE Office of Scientific and Technical Information (OSTI.GOV)

Griffith, W.C.; Muggenburg, B.A.; Hahn, F.F.

1995-12-01

There is a continuing need to understand dose-response relationships for ionizing radiation in order to protect the health of the public and nuclear workers from undue exposures. However, relatively few human populations have been exposed to doses of radiation high enough to cause observable, long-term health effects from which to derive dose-response relationships. This is particularly true for internally deposited radionuclides, although much effort has been devoted to epidemiological studies of the few types of exposures available, including lung cancers in uranium miners form the inhalation of the radioactive decay products of Ra, liver cancers in patients injected with Thorotrastmore » X-ray contrast medium containing Th, bone cancers in radium dial painters who ingested Ra, and bone cancers in patients who received therapeutic doses of Ra. These four types of exposures to internally deposited radionuclides provide a basis for understanding the health effects of many other radionuclides for which a potential for exposure exists. However, potential exposures to internally deposited radionuclides may differ in many modifying factors, such as route of exposure, population differences, and physical, chemical, and elemental forms of radionuclides. The only means available to study many of these modifying factors has been in laboratory animals, and to then extrapolate the results to humans. Three conclusions can be drawn from this example.« less

Aluminum potassium sulfate and tannic acid (ALTA) injection as the mainstay of treatment for internal hemorrhoids.

PubMed

Hachiro, Yoshikazu; Kunimoto, Masao; Abe, Tatsuya; Kitada, Masahiro; Ebisawa, Yoshiaki

2011-06-01

Aluminum potassium sulfate and tannic acid (ALTA) induce noninvasive sclerosis and the involution of hemorrhoids by initiating an inflammatory reaction. We assessed the mid-term outcome after ALTA sclerotherapy for symptomatic hemorrhoids. Between May 2006 and July 2009, 1210 patients with grade III or IV hemorrhoids underwent surgery at Kunimoto Hospital. Our treatment strategy for internal hemorrhoids is first establishing whether ALTA therapy is possible for the type of hemorrhoid, and then performing either ALTA therapy or alternatively, ligation and excision (LE) for those types unsuitable for ALTA therapy. A total of 448 patients were treated with ALTA therapy alone (Group A), 706 patients were treated with a combination of ALTA and LE therapy (Group B), and 56 patients were treated with LE alone (Group C). The overall recurrence rates were 3.6% (16/448) and 0.3% (2/706) in Groups A and B, respectively. There was no recurrence in Group C. Rectal ulcers developed at the injection site in four (0.9%) patients from Group A, but they healed within a few months with conservative therapy. ALTA sclerotherapy is a simple and safe treatment for symptomatic hemorrhoids, with few complications.

Prescription, Dispensation, and Generic Medicine Replacement Ratios: Influence on Japanese Medicine Costs

PubMed Central

Yokoi, Masayuki; Tashiro, Takao

2016-01-01

This study used publicly available data to examine the effect of the separation of dispensing and prescribing medicines between pharmacists in pharmacies and doctors in medical institutions (the separation system) and the generic medicine replacement ratio on the cost of various medicines in Japanese prefectures. For Japanese medical institutions, participation in the separation system is optional. Consequently, the expansion rate of the separation system for each administrative district is highly variable. In our multiple regression analysis, the dependent variables were the costs of daily medicines, specifically, total, internal, external, and injection medicines, as well as medical devices, and the independent variables were the expansion rate of the separation system and generic medicine replacement ratio. The expansion rate of the separation system showed a significant negative partial correlation with the daily costs of total, internal, and injection medicines as well as medical devices. Moreover, the rate of replacing brand name medicines with generic medicines showed a significant negative partial correlation with the daily costs of total and internal medicines. However, external and injection medicines and medical devices did not because only a few or no generic products of these types were sold in the Japanese market. Otherwise, expansion of the separation system was effective in reducing medicine costs, except in the case of external medicines. This suggests that the cost efficiency effect of the separation system does not function all the time. PMID:26234979

In vivo gene transfer to dopamine neurons of rat substantia nigra via the high-affinity neurotensin receptor.

PubMed Central

Alvarez-Maya, I.; Navarro-Quiroga, I.; Meraz-Ríos, M. A.; Aceves, J.; Martinez-Fong, D.

2001-01-01

BACKGROUND: Recently, we synthesized a nonviral gene vector capable of transfecting cell lines taking advantage of neurotensin (NT) internalization. The vector is NT cross-linked with poly-L-lysine, to which a plasmid DNA was bound to form a complex (NT-polyplex). Nigral dopamine neurons are able to internalize NT, thus representing a target for gene transfer via NT-polyplex. This hypothesis was tested here using reporter genes encoding green fluorescent protein or chloramphenicol acetyl transferase. MATERIALS AND METHODS: NT-polyplex was injected into the substantia nigra. Double immunofluorescence labeling was used to reveal the cell type involved in the propidium iodide-labeled polyplex internalization and reporter gene expression. RESULTS: Polyplex internalization was observed within dopamine neurons but not within glial cells, and was prevented by both hypertonic sucrose solution and SR-48692, a selective nonpeptide antagonist of NT receptors. Reporter gene expression was observed in dopamine neurons from 48 hr up to 15 days after NT-polyplex injection, and was prevented by SR-48692. However, no expression was seen when the NT-polyplex was injected into the ansiform lobule of the cerebellum, which contains low- but not high-affinity NT receptors. Neither internalization nor expression was observed in cultured glial cells, despite the NT-polyplex binding to those cells that was prevented by levocabastine, a low-affinity NT receptor antagonist. CONCLUSIONS: These results suggest that high-affinity NT receptors mediate the uptake of NT-polyplex with the subsequent reporter gene expression in vivo. NT polyfection may be used to transfer genes of physiologic interest to nigrostriatal dopamine neurons, and to produce transgenic animal models of dopamine-related diseases. PMID:11471555

The Role of Internalized Stigma in the Disclosure of Injecting Drug Use Among People Who Inject Drugs and Self-Report as HIV-Positive in Kohtla-Järve, Estonia.

PubMed

Johannson, Annika; Vorobjov, Sigrid; Heimer, Robert; Dovidio, John F; Uusküla, Anneli

2017-04-01

Disclosure of injecting drug use and its associations with stigma have received very little research attention. This cross-sectional study examined the role of internalized HIV and drug stigma (i.e., self-stigmatization) in the disclosure of injecting drug use among people who inject drugs (PWID) self-reporting as HIV-positive (n = 312) in Kohtla-Järve, Estonia. The internalization of both stigmas was relatively high. On average, PWID disclosed to three disclosure targets out of seven. Disclosure was highest to close friends and health care workers and lowest to employers and casual sex partners. Internalized drug stigma was negatively associated with disclosure to other family members (AOR = 0.48; 95% CI 0.30-0.77) and health care workers (AOR = 0.46; 95% CI 0.25-0.87). Internalized HIV stigma was positively associated with disclosure to health care workers (AOR = 2.26; 95% CI 1.27-4.00). No interaction effect of internalized stigmas on disclosures emerged. We concluded that effects of internalized stigmas on disclosures are few and not uniform.

Analysis of the Effect of Injection Pressure on Ignition Delay and Combustion Process of Biodiesel from Palm Oil, Algae and Waste Cooking Oil

NASA Astrophysics Data System (ADS)

Irham Anas, Mohd; Khalid, Amir; Hakim Zulkifli, Fathul; Jaat, Norrizam; Faisal Hushim, Mohd; Manshoor, Bukhari; Zaman, Izzuddin

2017-10-01

Biodiesel is a domestically produced, renewable fuel that can be manufactured from vegetable oils, animal fats, or recycled restaurant grease for use in diesel engines. The objective of this research is investigation the effects of the variant injection pressure on ignition delay and emission for different biodiesel using rapid compression machine. Rapid Compression Machine (RCM) is used to simulate a single compression stroke of an internal combustion engine as a real engine. Four types of biodiesel which are waste cooking oil, crude palm oil, algae and jatropha were tested at injection pressure of 80 MPa, 90 MPa and 130 MPa under constant ambient temperature at 950 K. Increased in injection pressure resulted shorter ignition delay proven by WCO5 which decreased from 1.3 ms at 80 MPa to 0.7 ms at 130 MPa. Meanwhile, emission for CO2 increased due to better fuel atomization for fuel-air mixture formation lead to completed combustion.

INTERNATIONAL CONFERENCE ON SEMICONDUCTOR INJECTION LASERS SELCO-87: Dependence of the photoluminescence density on surface preparation and properties of n-type InP

NASA Astrophysics Data System (ADS)

Knauer, A.; Gramlich, S.; Staske, R.

1988-11-01

Comprehensive studies were made of the relationship between the photoluminescence intensity and the effective carrier lifetime, on the one hand, and the quality of the surface treatment of wafers (damage, oxide layer thickness) and the initial properties of a material (surface and bulk defects, inhomogeneity of the dopant concentration), on the other.

INTERNATIONAL CONFERENCE ON SEMICONDUCTOR INJECTION LASERS SELCO-87: Multilayer CrPtCr/NiAu ohmic contacts with p-type GaAs in heterojunction laser structures

NASA Astrophysics Data System (ADS)

Wójcik, I.; Stareev, G.; Barcz, A.; Domański, M.

1988-11-01

Multilayer CrPtCr/NiAu metallization was deposited by sputtering in a magnetron on the p-type side of GaAs in a pulsed laser heterostructure. Heat treatment at 490 °C for 3 min produced a reliable ohmic contact with a specific resistance of 10- 6-10- 5 Ω · cm2, depending on the substrate doping. Secondary-ion mass spectroscopy and Rutherford backscattering methods were used to study the mechanism of formation of a contact.

INTERNATIONAL CONFERENCE ON SEMICONDUCTOR INJECTION LASERS SELCO-87: High-performance 1.3-μm InGaAsP/InP heterostructures formed by two-phase liquid epitaxy

NASA Astrophysics Data System (ADS)

Novotný, J.; Procházková, O.; Šrobár, F.; Zelinka, J.

1988-11-01

A description is given of a two-phase liquid epitaxy method used to grow InGaAsP/InP heterostructures intended for injection lasers emitting in the 1.3-μm range. A study was made of heterostructures of three types: double, with an additional quaternary layer (λ approx 1.1 μm) adjoining the active layer; with two quaternary layers between the active layer and the InP confining layers. The configuration with two flanking quaternary layers was found to be the best from the point of view of the threshold current density, optical output power, and reproducibility.

Pellet injection into H-mode ITER plasma with the presence of internal transport barriers

NASA Astrophysics Data System (ADS)

Leekhaphan, P.; Onjun, T.

2011-04-01

The impacts of pellet injection into ITER type-1 ELMy H-mode plasma with the presence of internal transport barriers (ITBs) are investigated using self-consistent core-edge simulations of 1.5D BALDUR integrated predictive modeling code. In these simulations, the plasma core transport is predicted using a combination of a semi-empirical Mixed B/gB anomalous transport model, which can self-consistently predict the formation of ITBs, and the NCLASS neoclassical model. For simplicity, it is assumed that toroidal velocity for ω E× B calculation is proportional to local ion temperature. In addition, the boundary conditions are predicted using the pedestal temperature model based on magnetic and flow shear stabilization width scaling; while the density of each plasma species, including both hydrogenic and impurity species, at the boundary are assumed to be a large fraction of its line averaged density. For the pellet's behaviors in the hot plasma, the Neutral Gas Shielding (NGS) model by Milora-Foster is used. It was found that the injection of pellet could result in further improvement of fusion performance from that of the formation of ITB. However, the impact of pellet injection is quite complicated. It is also found that the pellets cannot penetrate into a deep core of the plasma. The injection of the pellet results in a formation of density peak in the region close to the plasma edge. The injection of pellet can result in an improved nuclear fusion performance depending on the properties of pellet (i.e., increase up to 5% with a speed of 1 km/s and radius of 2 mm). A sensitivity analysis is carried out to determine the impact of pellet parameters, which are: the pellet radius, the pellet velocity, and the frequency of injection. The increase in the pellet radius and frequency were found to greatly improve the performance and effectiveness of fuelling. However, changing the velocity is observed to exert small impact.

Active locking and entanglement in type II optical parametric oscillators

NASA Astrophysics Data System (ADS)

Ruiz-Rivas, Joaquín; de Valcárcel, Germán J.; Navarrete-Benlloch, Carlos

2018-02-01

Type II optical parametric oscillators are amongst the highest-quality sources of quantum-correlated light. In particular, when pumped above threshold, such devices generate a pair of bright orthogonally-polarized beams with strong continuous-variable entanglement. However, these sources are of limited practical use, because the entangled beams emerge with different frequencies and a diffusing phase difference. It has been proven that the use of an internal wave-plate coupling the modes with orthogonal polarization is capable of locking the frequencies of the emerging beams to half the pump frequency, as well as reducing the phase-difference diffusion, at the expense of reducing the entanglement levels. In this work we characterize theoretically an alternative locking mechanism: the injection of a laser at half the pump frequency. Apart from being less invasive, this method should allow for an easier real-time experimental control. We show that such an injection is capable of generating the desired phase locking between the emerging beams, while still allowing for large levels of entanglement. Moreover, we find an additional region of the parameter space (at relatively large injections) where a mode with well defined polarization is in a highly amplitude-squeezed state.

INTERNATIONAL CONFERENCE ON SEMICONDUCTOR INJECTION LASERS SELCO-87: Doping inhomogeneities and behavior of compensation of n-type GaAs and InP

NASA Astrophysics Data System (ADS)

Wruck, D.; Knauer, A.

1988-11-01

A comparison was made of the distributions of Sn and of the chalcogens S and Se in InP and GaAs, determined from infrared absorption and the Hall effect. An analysis was made of the possible cause of the difference between the values of the degree of compensation determined by the two methods.

Accuracy and Injection Force of the Gla-300 Injection Device Compared With Other Commercialized Disposable Insulin Pens.

PubMed

Klonoff, David; Nayberg, Irina; Thonius, Marissa; See, Florian; Abdel-Tawab, Mona; Erbstein, Frank; Haak, Thomas

2015-08-26

To deliver insulin glargine 300 U/mL (Gla-300), the widely used SoloSTAR(®) pen has been modified to allow for accurate and precise delivery of required insulin units in one-third of the volume compared with insulin glargine 100 U/mL, while improving usability. Here we compare the accuracy and injection force of 3 disposable insulin pens: Gla-300 SoloSTAR(®), FlexPen(®), and KwikPen™. For the accuracy assessment, 60 of each of the 3 tested devices were used for the delivery of 3 different doses (1 U, half-maximal dose, and maximal dose), which were measured gravimetrically. For the injection force assessment, 20 pens of each of the 3 types were tested twice at half-maximal and once at maximal dose, at an injection speed of 6 U/s. All tested pens met the International Organization for Standardization (ISO) requirements for dosing accuracy, with Gla-300 SoloSTAR showing the lowest between-dose variation (greatest reproducibility) at all dose levels. Mean injection force was significantly lower for Gla-300 SoloSTAR than for the other 2 pens at both half maximal and maximal doses (P < .0271). All tested pens were accurate according to ISO criteria, and the Gla-300 SoloSTAR pen displayed the greatest reproducibility and lowest injection force of any of the 3 tested devices. © 2015 Diabetes Technology Society.

ALTA injection sclerosing therapy:non-excisional treatment of internal hemorrhoids.

PubMed

Miyamoto, Hidenori; Asanoma, Michihito; Miyamoto, Hideyuki; Shimada, Mitsuo

2012-01-01

Aluminum potassium sulfate and tannic acid (ALTA) is a new sclerosing therapy for internal hemorrhoids. This injection therapy is a four-step direct injection sclerosing procedure intended to shrink and harden internal hemorrhoids to eliminate hemorrhoidal prolapse and bleeding. The aim of this study was to assess the short term efficacy of this treatment. The procedure was conducted using a four-step injection process under perianal local anesthesia. The entry point for the four-step injection of ALTA is the submucosa of the superior pole, the submucosa in the central part, the mucous lamina propria in the central part and the submucosa at the inferior pole of hemorrhoid. From January 2009 to March 2010, we performed the ALTA sclerosing therapy on 28 patients (14 men and 14 women; mean age, 64.6 years), including 5 second-degree, 16 third-degree and 7 fourth-degree hemorrhoids. There were 6 postoperative complications (2 cases of low grade fever, 2 anal pains, 1 necrosis at injection site and 1 perianal dermatitis). All symptoms of prolapse or bleeding disappeared after 29 postoperative days. There were 3 recurrent cases (10.7%). ALTA sclerosing therapy is a useful and less invasive treatment for internal hemorrhoids.

Internal absorption of gamma-rays in relativistic blobs of active galactic nuclei

NASA Astrophysics Data System (ADS)

Sitarek, Julian; Bednarek, Wlodek

2007-06-01

We investigate the production of gamma-rays in the inverse Compton (IC) scattering process by leptons accelerated inside relativistic blobs in jets of active galactic nuclei. Leptons are injected homogeneously inside the spherical blob and initiate IC e ± pair cascade in the synchrotron radiation (produced by the same population of leptons, SSC model), provided that the optical depth for gamma-rays is larger than unity. It is shown that for likely parameters internal absorption of gamma-rays has to be important. We suggest that new type of blazars might be discovered by the future simultaneous X-ray and γ-ray observations, showing peak emissions in the hard X-rays, and in the GeV γ-rays. Moreover, the considered scenario might be also responsible for the orphan X-ray flares recently reported from BL Lac type active galaxies.

Pneumatic injection system using a hot exhaust gases, developed in Institute of Automobiles and Internal Combustion Engines of Cracow University of Technology

NASA Astrophysics Data System (ADS)

Marek, W.; Śliwiński, K.

2016-09-01

The article concerns research carried out by the Krakow University of Technology on the concept of a pneumatic fuel injection spark ignition engines. In this artkule an example of an application of this type of power to the Wankel's engine, together with a description of its design and operating principles and the benefits of its use. The work was carried out over many years by Prof. Stanislaw Jarnuszkiewicz despite the development of many patents but not widely used in engines. Authors who were involved in the team-work of the team of Prof. Jarnuszkiewicz, after conducting exploratory studies, believed that this solution has development potential and this will be presented in future articles.

Evolution and transition mechanisms of internal swirling flows with tangential entry

NASA Astrophysics Data System (ADS)

Wang, Yanxing; Wang, Xingjian; Yang, Vigor

2018-01-01

The characteristics and transition mechanisms of different states of swirling flow in a cylindrical chamber have been numerically investigated using the Galerkin finite element method. The effects of the Reynolds number and swirl level were examined, and a unified theory connecting different flow states was established. The development of each flow state is considered as a result of the interaction and competition between basic mechanisms: (1) the centrifugal effect, which drives an axisymmetric central recirculation zone (CRZ); (2) flow instabilities, which develop at the free shear layer and the central solid-body rotating flow; (3) the bouncing and restoring effects of the injected flow, which facilitate the convergence of flow on the centerline and the formation of bubble-type vortex breakdown; and (4) the damping effect of the end-induced flow, which suppresses the development of the instability waves. The results show that the CRZ, together with the free shear layer on its surface, composes the basic structure of swirling flow. The development of instability waves produces a number of discrete vortex cores enclosing the CRZ. The azimuthal wave number is primarily determined by the injection angle. Generally, the wave number is smaller at a higher injection angle, due to the reduction of the perimeter of the free shear layer. At the same time, the increase in the Reynolds number facilitates the growth of the wave number. The end-induced flow tends to reduce the wave number near the head end and causes a change in wave number from the head end to the downstream region. Spiral-type vortex breakdown can be considered as a limiting case at a high injection angle, with a wave number equal to 0 near the head end and equal to 1 downstream. At lower Reynolds numbers, the bouncing and restoring effect of the injected flow generates bubble-type vortex breakdown.

Method for operating a spark-ignition, direct-injection internal combustion engine

DOEpatents

Narayanaswamy, Kushal; Koch, Calvin K.; Najt, Paul M.; Szekely, Jr., Gerald A.; Toner, Joel G.

2015-06-02

A spark-ignition, direct-injection internal combustion engine is coupled to an exhaust aftertreatment system including a three-way catalytic converter upstream of an NH3-SCR catalyst. A method for operating the engine includes operating the engine in a fuel cutoff mode and coincidentally executing a second fuel injection control scheme upon detecting an engine load that permits operation in the fuel cutoff mode.

Outcomes of Direct Vision Internal Urethrotomy for Bulbar Urethral Strictures: Technique Modification with High Dose Triamcinolone Injection.

PubMed

Modh, Rishi; Cai, Peter Y; Sheffield, Alyssa; Yeung, Lawrence L

2015-01-01

Objective. To evaluate the recurrence rate of bulbar urethral strictures managed with cold knife direct vision internal urethrotomy and high dose corticosteroid injection. Methods. 28 patients with bulbar urethral strictures underwent direct vision internal urethrotomy with high dose triamcinolone injection into the periurethral tissue and were followed up for recurrence. Results. Our cohort had a mean age of 60 years and average stricture length of 1.85 cm, and 71% underwent multiple previous urethral stricture procedures with an average of 5.7 procedures each. Our technique modification of high dose corticosteroid injection had a recurrence rate of 29% at a mean follow-up of 20 months with a low rate of urinary tract infections. In patients who failed treatment, mean time to stricture recurrence was 7 months. Patients who were successfully treated had significantly better International Prostate Symptom Scores at 6, 9, and 12 months. There was no significant difference in maximum flow velocity on Uroflowmetry at last follow-up but there was significant difference in length of follow-up (p = 0.02). Conclusions. High dose corticosteroid injection at the time of direct vision internal urethrotomy is a safe and effective procedure to delay anatomical and symptomatic recurrence of bulbar urethral strictures, particularly in those who are poor candidates for urethroplasty.

Comparing the effect of An's Shaobei Injection ([symbols; see text]) with Xiaozhiling Injection ([symbols; see text]) in patients with internal hemorrhoids of grade I-III: a prospective cohort study.

PubMed

An, A-yue; Feng, Da-yong; Wang, Chun-hui; Shi, Yu-ying; Xiang, Jing-jing; Bai, Zhi-yong; Li, Kun-cheng; Liu, Jin-yang

2014-07-01

To compare the effect of An's Shaobei Injection ([symbols; see text]) with Xiaozhiling Injection ([symbols; see text]) in patients with internal hemorrhoids of grade I-III. This cohort study included 1,520 internal hemorrhoids patients with grade I-III who were scheduled for liquid injection treatment from July 2003 to July 2009. The cohort included patients who underwent either An's Shaobei Injection treatment (the treatment group, 760 cases) or Xiaozhiling Injection treatment (the control group, 760 cases). All patients were followed up regularly for 3 years; the observing indices included anal function recovery and clinical response after operation. Among the 1,520 patients, 1,508 (99.2%) completed the 3-year follow-up. The efficacy rate was 97.5% in the treatment group, significantly higher than the control group (91.8%, P<0.01). The recurrence rate in the treatment group was 0.5%, significantly lower than that of the control group (1.3%, P<0.01). In addition, perianal callosity occurred in 8 cases (1.1%) and anorectal stricture in 26 cases (3.5%) after operation in the control group. There was no perianal callosity and anorectal stricture in the treatment group. The treatment with An's Shaobei Injection demonstrated superior clinical effect to Xiaozhiling Injection with fewer adverse effects.

Active Flow Separation Control of a Stator Vane Using Surface Injection in a Multistage Compressor Experiment

NASA Technical Reports Server (NTRS)

Culley, Dennis E.; Bright, Michelle M.; Prahst, Patricia S.; Strazisar, Anthony J.

2003-01-01

Micro-flow control actuation embedded in a stator vane was used to successfully control separation and improve near stall performance in a multistage compressor rig at NASA Glenn. Using specially designed stator vanes configured with internal actuation to deliver pulsating air through slots along the suction surface, a research study was performed to identify performance benefits using this microflow control approach. Pressure profiles and unsteady pressure measurements along the blade surface and at the shroud provided a dynamic look at the compressor during microflow air injection. These pressure measurements lead to a tracking algorithm to identify the onset of separation. The testing included steady air injection at various slot locations along the vane. The research also examined the benefit of pulsed injection and actively controlled air injection along the stator vane. Two types of actuation schemes were studied, including an embedded actuator for on-blade control. Successful application of an online detection and flow control scheme will be discussed. Testing showed dramatic performance benefit for flow reattachment and subsequent improvement in diffusion through the use of pulsed controlled injection. The paper will discuss the experimental setup, the blade configurations, and preliminary CFD results which guided the slot location along the blade. The paper will also show the pressure profiles and unsteady pressure measurements used to track flow control enhancement, and will conclude with the tracking algorithm for adjusting the control.

Goals Set by Patients Using the ICF Model before Receiving Botulinum Injections and Their Relation to Spasticity Distribution

PubMed Central

Choi, Kevin; Peters, Jaclyn; Tri, Andrew; Chapman, Elizabeth; Sasaki, Ayako; Ismail, Farooq; Boulias, Chris; Reid, Shannon

2017-01-01

Purpose: Goal Attainment Scaling (GAS) is used to assess functional gains in response to treatment. Specific characteristics of the functional goals set by individuals receiving botulinum toxin type A (BoNTA) injections for spasticity management are unknown. The primary objectives of this study were to describe the characteristics of the goals set by patients before receiving BoNTA injections using the International Classification of Functioning, Disability and Health (ICF) and to determine whether the pattern of spasticity distribution affected the goals set. Methods: A cross-sectional retrospective chart review was carried out in an outpatient spasticity-management clinic in Toronto. A total of 176 patients with a variety of neurological lesions attended the clinic to receive BoNTA injections and completed GAS from December 2012 to December 2013. The main outcome measures were the characteristics of the goals set by the participants on the basis of ICF categories (body functions and structures, activity and participation) and the spasticity distribution using Modified Ashworth Scale scores. Results: Of the patients, 73% set activity and participation goals, and 27% set body functions and structures goals (p<0.05). In the activity and participation category, 30% of patients set moving and walking goals, 28% set self-care and dressing goals, and 12% set changing and maintaining body position goals. In the body functions and structures category, 18% set neuromuscular and movement-related goals, and 8% set pain goals. The ICF goal categories were not related to the patterns of spasticity (upper limb vs. lower limb or unilateral vs. bilateral spasticity) or type of upper motor neuron (UMN) lesion (p>0.05). Conclusion: Our results show that patients receiving BoNTA treatment set a higher percentage of activity and participation goals than body functions and structures goals. Goal classification was not affected by type of spasticity distribution or type of UMN disorder. PMID:28539691

International Space Station-Based Electromagnetic Launcher for Space Science Payloads

NASA Technical Reports Server (NTRS)

Jones, Ross M.

2013-01-01

A method was developed of lowering the cost of planetary exploration missions by using an electromagnetic propulsion/launcher, rather than a chemical-fueled rocket for propulsion. An electromagnetic launcher (EML) based at the International Space Station (ISS) would be used to launch small science payloads to the Moon and near Earth asteroids (NEAs) for the science and exploration missions. An ISS-based electromagnetic launcher could also inject science payloads into orbits around the Earth and perhaps to Mars. The EML would replace rocket technology for certain missions. The EML is a high-energy system that uses electricity rather than propellant to accelerate payloads to high velocities. The most common type of EML is the rail gun. Other types are possible, e.g., a coil gun, also known as a Gauss gun or mass driver. The EML could also "drop" science payloads into the Earth's upper

InGaN/GaN light-emitting diode having direct hole injection plugs and its high-current operation.

PubMed

Kim, Sungjoon; Cho, Seongjae; Jeong, Jaedeok; Kim, Sungjun; Hwang, Sungmin; Kim, Garam; Yoon, Sukho; Park, Byung-Gook

2017-03-20

The light-emitting diode (LED) with an improved hole injection and straightforward process integration is proposed. p-type GaN direct hole injection plugs (DHIPs) are formed on locally etched multiple-quantum wells (MQWs) by epitaxial lateral overgrowth (ELO) method. We confirm that the optical output power is increased up to 23.2% at an operating current density of 100 A/cm². Furthermore, in order to identify the origin of improvement in optical performance, the transient light decay time and light intensity distribution characteristics were analyzed on the DHIP LED devices. Through the calculation of the electroluminescence (EL) decay time, internal quantum efficiency (IQE) is extracted along with the recombination parameters, which reveals that the DHIPs have a significant effect on enhancement of radiative recombination and reduction of efficiency droop. Furthermore, the mapping PL reveals that the DHIP LED also has a potential to improve the light extraction efficiency by hexagonal pyramid shaped DHIPs.

Heart Rate Variability (HRV) modifications in adult hemiplegic patients after botulinum toxin type A (nt-201) injection.

PubMed

Invernizzi, M; Carda, S; Molinari, C; Stagno, D; Cisari, C; Baricich, A

2015-08-01

The most important adverse effect of BoNT-A is the systemic diffusion of the toxin. There is some evidence that the administration of high doses can increase the risk of systemic diffusion and the development of clinically evident adverse effects, however an international consensus does not exist about its maximum dose. The aim of this study was to evaluate changes in autonomic heart drive induced by high doses (higher than 600 units) of incobotulinumtoxinA injection in spastic stroke patients. Moreover, the treatment safety by monitoring adverse events occurrence was assessed. Case control study. Eleven stroke survivors with spastic hemiplegia. Patients were treated with intramuscular focal injections of IncobotulinumtoxinA (NT 201; Xeomin®, Merz Pharmaceuticals GmbH, Frankfurt, Germany). Doses were below 12 units/Kg. Each patient underwent an ECG recording before injection and 10 days after treatment. Linear and non-linear Heart Rate variability (HRV) measures were derived from ECGs with a dedicated software. None of the variable considered showed statistically significant changes after BoNT-A injection. The use of incobotulinumtoxinA in adult patients at doses up to 12 units/kg seems to be safe regarding autonomic heart drive. The use of IncobotulinumtoxinA up to 600 units could be a safe therapeutic option in spastic hemiplegic stroke survivors.

Microstructural development inside the stress induced martensite variant in a Ti-Ni-Nb shape memory alloy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zheng, Y.F.; Cai, W.; Zhang, J.X.

2000-04-03

The microstructural development inside the stress induced martensite (SIM) variants in Ti-Ni-Nb alloy with various degrees of deformation have been revealed by electron microscopic observations. The orientation relationship between the SIM and the parent phase has been found: [1{bar 1}0]{sub M}{parallel}[11{bar 1}]{sub B2}, (001){sub M} 5{degree} away from (101){sub B2}. The lattice invariant shear of the SIM variants at the slightly deformed stage is dominantly (11{bar 1}) Type I twin. Besides the ordinary slip, the adjustment and development of the internal secondary twinning from (11{bar 1}) Type I twin to {l_angle}011{r_angle} Type II/ or (011) Type I twin, (001)compound twinmore » and (111) Type I twin happen concurrently or in combination inside the SIM variants with the further deformation. The corresponding deformation mechanisms include stress induced reorientation of SIM substructural bands by the most favorably oriented twin system, stress induced migration of the SIM substructural boundary through internal twinning and stress induced injection of foreign SIM variant to the preexisting substructural bands.« less

Localized internal radiotherapy with 90Y particles embedded in a new thermosetting alginate gel: a feasibility study in pigs.

PubMed

Holte, Oyvind; Skretting, Arne; Bach-Gansmo, Tore; Hol, Per Kristian; Johnsrud, Kjersti; Tønnesen, Hanne Hjorth; Karlsen, Jan

2006-02-01

Internal radiotherapy requires the localization of the radionuclide to the site of action. A new injectable alginate gel formulation intended to undergo immediate gelation in tissues and capable of encapsulating radioactive particles containing 90Y was investigated. The formulation was injected intramuscularly, into the bone marrow compartment of the femur and intravenously, respectively, in pigs. The distribution of radioactivity in various tissues was determined. Following intramuscular injection, more than 90% of the radioactivity was found at the site of injection. Following injection into bone marrow, 30-40% of the radioactivity was retained at the site of injection, but a considerable amount of radioactivity was also detected in the lungs (35-45%) and the liver (5-18%). Following intravenous injection, 80-90% of the radioactivity was found in the lungs. The present formulation appears suitable for localized radiotherapy in organs and tissues having low perfusion.

[Measles-Mumps-Rubella vaccination of an egg-allergic child sensitized to gelatin].

PubMed

Dumortier, B; Nosbaum, A; Ponvert, C; Nicolas, J-F; Bérard, F

2013-08-01

The Measles-Mumps-Rubella (MMR) vaccine is often postponed in egg-allergic patients due to fear of anaphylactic reaction at the time of injection of this vaccin produced on egg derivates. However, this vaccine is recommended by health authorities, especially in case of increased measles incidence, and international recommendations indicate that there is no need for predictive allergological work-up and that the MMR vaccine is well tolerated in egg-allergic patients. We report on the case of a 12-year-old child with severe immediate-type egg allergy. Immediate-reading intradermal skin tests performed prior to the MMR vaccine were positive. Subsequent allergological work-up revealed a gelatin sensitization, and the child tolerated injections of the vaccine given according to a tolerance induction protocol. Gelatin is used as a stabilizer in numerous vaccines and may be responsible for immediate-type hypersentivity reactions to gelatin-containing vaccines. In case of reaction induced by the MMR vaccine, one needs to explore a potential gelatin sensitization/allergy. The MMR vaccine should be given and is well tolerated in patients with immediate-type egg hypersensitivity, even when gelatin sensitization is combined. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

Multimodality Imaging of Gene Transfer with a Receptor-Based Reporter Gene

PubMed Central

Chen, Ron; Parry, Jesse J.; Akers, Walter J.; Berezin, Mikhail Y.; El Naqa, Issam M.; Achilefu, Samuel; Edwards, W. Barry; Rogers, Buck E.

2010-01-01

Gene therapy trials have traditionally used tumor and tissue biopsies for assessing the efficacy of gene transfer. Non-invasive imaging techniques offer a distinct advantage over tissue biopsies in that the magnitude and duration of gene transfer can be monitored repeatedly. Human somatostatin receptor subtype 2 (SSTR2) has been used for the nuclear imaging of gene transfer. To extend this concept, we have developed a somatostatin receptor–enhanced green fluorescent protein fusion construct (SSTR2-EGFP) for nuclear and fluorescent multimodality imaging. Methods An adenovirus containing SSTR2-EGFP (AdSSTR2-EGFP) was constructed and evaluated in vitro and in vivo. SCC-9 human squamous cell carcinoma cells were infected with AdEGFP, AdSSTR2, or AdSSTR2-EGFP for in vitro evaluation by saturation binding, internalization, and fluorescence spectroscopy assays. In vivo biodistribution and nano-SPECT imaging studies were conducted with mice bearing SCC-9 tumor xenografts directly injected with AdSSTR2-EGFP or AdSSTR2 to determine the tumor localization of 111In-diethylenetriaminepentaacetic acid (DTPA)-Tyr3-octreotate. Fluorescence imaging was conducted in vivo with mice receiving intratumoral injections of AdSSTR2, AdSSTR2-EGFP, or AdEGFP as well as ex vivo with tissues extracted from mice. Results The similarity between AdSSTR2-EGFP and wild-type AdSSTR2 was demonstrated in vitro by the saturation binding and internalization assays, and the fluorescence emission spectra of cells infected with AdSSTR2-EGFP was almost identical to the spectra of cells infected with wild-type AdEGFP. Biodistribution studies demonstrated that the tumor uptake of 111In-DTPA-Tyr3-octreotate was not significantly different (P > 0.05) when tumors (n = 5) were injected with AdSSTR2 or AdSSTR2-EGFP but was significantly greater than the uptake in control tumors. Fluorescence was observed in tumors injected with AdSSTR2-EGFP and AdEGFP in vivo and ex vivo but not in tumors injected with AdSSTR2. Although fluorescence was observed, there were discrepancies between in vivo imaging and ex vivo imaging as well as between nuclear imaging and fluorescent imaging. Conclusion These studies showed that the SSTR2-EGFP fusion construct can be used for in vivo nuclear and optical imaging of gene transfer. PMID:20720053

Evaluating the functional outcomes of ultrasound-guided botulinum toxin type A injections using the Euro-musculus approach for upper limb spasticity treatment in post-stroke patients; an observational study.

PubMed

Buyukavci, Raikan; Akturk, Semra; Ersoy, Yüksel

2018-02-07

Ultrasound-guided botulinum toxin type A injection is an effective treatment for spasticity. Euro-musculus spasticity approach is a new method for administering injections to the correct point of the correct muscle. The clinical outcomes of this practical approach is not yet available in the literature. The purpose of this study was to evaluate the effects on spasticity and the functional outcomes of ultrasound guided botulinum toxin type A injections via the Euro-musculus spasticity approach to treat upper limb spasticity in post-stroke patients. An observational study. Inpatient post-stroke patients. Twenty five post-stroke patients with post-stroke upper limb spasticity were recruited. The ultrasound-guided botulinum toxin type A injections were administered into the spastic target muscles using the Euro-musculus spasticity approach, and all of the patients were enrolled in rehabilitation programmes after the injections. This research included the innervation zone and injection site figures and ultrasound images of each muscle in the upper limb. The degree of spasticity was assessed via the Modified Ashworth Scale and the upper limb motor function via the Fugl Meyer Upper Extremity Scale at the baseline and 4 and 12 weeks after the botulinum toxin type A injection. Significant decreases in the Modified Ashworth Scale scores of the upper limb flexor muscle tone measured 4 and 12 weeks after the botulinum toxin type A injection were found when compared to the baseline scores (p<0.025). When compared with the baseline Fugl Meyer Upper Extremity subgroup scores, the sitting position, wrist and total scores at 4 and 12 weeks were significantly improved (p<0.025). However, only the Fugl Meyer Upper Extremity hand scores were significantly improved 12 weeks after the injection (p<0.025). Ultrasound-guided botulinum toxin type A injection via the Euro- musculus spasticity approach is a practical and effective method for administering injections to the correct point of the correct muscle. Ultrasound-guided botulinum toxin type A injections combined with rehabilitation programmes decrease spasticity and improve the upper extremity motor functions in stroke patients. This new approach for ultrasound- guided botulinum toxin type A injection is very practical and effective method for upper extremity spasticity.

Mitogen-activated protein kinase is required for the behavioral desensitization that occurs after repeated injections of angiotensin II

PubMed Central

Vento, Peter J.; Daniels, Derek

2013-01-01

Angiotensin II (AngII) acts on central angiotensin type 1 (AT1) receptors to increase water and saline intake. Prolonged exposure to AngII in cell culture models results in a desensitization of the AT1 receptor that is thought to involve receptor internalization, and a behavioral correlate of this desensitization has been shown in rats after repeated central injections of AngII. Specifically, rats given repeated injections of AngII drink less water than controls after a subsequent test injection of AngII. Under the same conditions, however, repeated injections of AngII have no effect on AngII-induced saline intake. Given earlier studies indicating that separate intracellular signaling pathways mediate AngII-induced water and saline intake, we hypothesized that the desensitization observed in rats may be incomplete, leaving the receptor able to activate mitogen-activated protein (MAP) kinases (ERK1/2), which play a role in AngII-induced saline intake without affecting water intake. In support of this hypothesis, we found no difference in MAP kinase phosphorylation after an AngII test injection in rats given prior treatment with repeated injections of vehicle, AngII, or Sar1,Ile4,Ile8-AngII (SII), an AngII analog that activates MAP kinase without G protein coupling. In addition, we found that pretreatment with the MAP kinase inhibitor U0126 completely blocked the desensitizing effect of repeated AngII injections on water intake. Furthermore, AngII-induced water intake was reduced similarly by repeated injections of AngII or SII. The results suggest that G protein-independent signaling is sufficient to produce behavioral desensitization of the angiotensin system and that the desensitization requires MAP kinase activation. PMID:22581747

Mitogen-activated protein kinase is required for the behavioural desensitization that occurs after repeated injections of angiotensin II.

PubMed

Vento, Peter J; Daniels, Derek

2012-12-01

Angiotensin II (Ang II) acts on central angiotensin type 1 (AT(1)) receptors to increase water and saline intake. Prolonged exposure to Ang II in cell culture models results in a desensitization of the AT(1) receptor that is thought to involve receptor internalization, and a behavioural correlate of this desensitization has been shown in rats after repeated central injections of Ang II. Specifically, rats given repeated injections of Ang II drink less water than control animals after a subsequent test injection of Ang II. In the same conditions, however, repeated injections of Ang II have no effect on Ang II-induced saline intake. Given earlier studies indicating that separate intracellular signalling pathways mediate Ang II-induced water and saline intake, we hypothesized that the desensitization observed in rats may be incomplete, leaving the receptor able to activate mitogen-activated protein (MAP) kinases (ERK1/2), which play a role in Ang II-induced saline intake without affecting water intake. In support of this hypothesis, we found no difference in MAP kinase phosphorylation after an Ang II test injection in rats given prior treatment with repeated injections of vehicle, Ang II or Sar(1),Ile(4),Ile(8)-Ang II (SII), an Ang II analogue that activates MAP kinase without G protein coupling. In addition, we found that pretreatment with the MAP kinase inhibitor U0126 completely blocked the desensitizing effect of repeated Ang II injections on water intake. Furthermore, Ang II-induced water intake was reduced to a similar extent by repeated injections of Ang II or SII. The results suggest that G protein-independent signalling is sufficient to produce behavioural desensitization of the angiotensin system and that the desensitization requires MAP kinase activation.

Resilient children of injection drug users.

PubMed

Pilowsky, Daniel J; Zybert, Patricia A; Vlahov, David

2004-11-01

To examine associations between resilience in children of injection drug users and children's coping strategies, parenting stress, and children's social support. Injection drug-using parents (n=91) and their children aged 6 to 11 (n=117) were recruited in Baltimore (1997-1999). Resilience was defined as scoring in the lowest quartile of the Child Behavior Checklist total psychopathology score. Coping strategies used by resilient and nonresilient children, the extent and types of social support that they received, and the level of parenting stress reported by their parents were compared and contrasted. Rates of depressive, anxiety, and disruptive behavior disorders were 15.4%, 22.2%, and 21.4%, respectively, for the entire sample. Compared with the nonresilient, resilient children were less likely to use two avoidance coping strategies (internalizing [p=.002] and externalizing [p=.017]). The level of actual support received by resilient and nonresilient children did not differ significantly (p=.202). Perceived support was greater among resilient children (as reported by their parents; p <.001), and their parents reported lower parenting stress (p=.042). A significant proportion of children of injection drug users are in need of clinical care. Interventions to help children of substance-abusing parents modify their coping style merit exploration.

Analytical modeling and numerical simulation of the short-wave infrared electron-injection detectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Movassaghi, Yashar; Fathipour, Morteza; Fathipour, Vala

2016-03-21

This paper describes comprehensive analytical and simulation models for the design and optimization of the electron-injection based detectors. The electron-injection detectors evaluated here operate in the short-wave infrared range and utilize a type-II band alignment in InP/GaAsSb/InGaAs material system. The unique geometry of detectors along with an inherent negative-feedback mechanism in the device allows for achieving high internal avalanche-free amplifications without any excess noise. Physics-based closed-form analytical models are derived for the detector rise time and dark current. Our optical gain model takes into account the drop in the optical gain at high optical power levels. Furthermore, numerical simulation studiesmore » of the electrical characteristics of the device show good agreement with our analytical models as well experimental data. Performance comparison between devices with different injector sizes shows that enhancement in the gain and speed is anticipated by reducing the injector size. Sensitivity analysis for the key detector parameters shows the relative importance of each parameter. The results of this study may provide useful information and guidelines for development of future electron-injection based detectors as well as other heterojunction photodetectors.« less

Stigma against People Living with HIV/AIDS in China: Does the Route of Infection Matter?

PubMed Central

Zhang, Chen; Li, Xiaoming; Liu, Yu; Qiao, Shan; Zhang, Liying; Zhou, Yuejiao; Tang, Zhenzhu; Shen, Zhiyong; Chen, Yi

2016-01-01

In the current study, we tested the hypothesis that people who contracted HIV from “blameless” routes (e.g., blood transfusion, sex with stable partners) are less stigmatized compared to people who contracted HIV from “blamable” routes (e.g., injection drug use, sex with sex workers). A cross-sectional study was conducted among 2,987 participants in Guangxi province, China, between 2012 and 2013. We employed both explanatory and predictive modeling strategy by using multivariate linear regression models. In the explanatory models, we assessed the association between routes of infection and three types of stigma (perceived, internalized, and enacted). From identified routes of infection that significantly contributed to higher stigma, we employed predictive modeling to explore predictors for the specific type of stigma. Multiple-imputation was employed for sensitivity analyses. Of the total sample, 63% were male and the average age was 42.9 years (ranged between 18 and 88). Multivariate regression models revealed that contraction from commercial sex increased the perceived (β = 0.46, 95%CI = 0.02, 0.90) and internalized stigma (β = 0.60, 95%CI = 0.09, 1.10), while injecting drug use increased the perceived (β = 0.65, 95%CI = 0.07, 1.22) and enacted stigma (β = 0.09, 95%CI = 0.02, 0.16) after controlling for confounders. Among PLWHA who were infected via commercial sex partners, social support was negatively associated with perceived (β = -0.47, 95%CI = -0.79, -0.14) and internalized stigma (β = -0.80, 95%CI = -1.24, -0.35). Among PLWHA who were infected via injecting drugs, no adherence to antiretroviral treatment (β = 0.41, 95%CI = 0.01, 0.82) was positively associated with perceived stigma, and disclosure of serostatus to others was negatively associated with enacted stigma (β = -0.20, 95%CI = -0.34, -0.05). Knowledge of the association between routes of infection and stigma can guide health professionals and policy makers to develop tailored intervention strategies to mitigate the effects of stigma and enhance HIV care utilization among PLWHA in China. PMID:26981636

Stigma against People Living with HIV/AIDS in China: Does the Route of Infection Matter?

PubMed

Zhang, Chen; Li, Xiaoming; Liu, Yu; Qiao, Shan; Zhang, Liying; Zhou, Yuejiao; Tang, Zhenzhu; Shen, Zhiyong; Chen, Yi

2016-01-01

In the current study, we tested the hypothesis that people who contracted HIV from "blameless" routes (e.g., blood transfusion, sex with stable partners) are less stigmatized compared to people who contracted HIV from "blamable" routes (e.g., injection drug use, sex with sex workers). A cross-sectional study was conducted among 2,987 participants in Guangxi province, China, between 2012 and 2013. We employed both explanatory and predictive modeling strategy by using multivariate linear regression models. In the explanatory models, we assessed the association between routes of infection and three types of stigma (perceived, internalized, and enacted). From identified routes of infection that significantly contributed to higher stigma, we employed predictive modeling to explore predictors for the specific type of stigma. Multiple-imputation was employed for sensitivity analyses. Of the total sample, 63% were male and the average age was 42.9 years (ranged between 18 and 88). Multivariate regression models revealed that contraction from commercial sex increased the perceived (β = 0.46, 95%CI = 0.02, 0.90) and internalized stigma (β = 0.60, 95%CI = 0.09, 1.10), while injecting drug use increased the perceived (β = 0.65, 95%CI = 0.07, 1.22) and enacted stigma (β = 0.09, 95%CI = 0.02, 0.16) after controlling for confounders. Among PLWHA who were infected via commercial sex partners, social support was negatively associated with perceived (β = -0.47, 95%CI = -0.79, -0.14) and internalized stigma (β = -0.80, 95%CI = -1.24, -0.35). Among PLWHA who were infected via injecting drugs, no adherence to antiretroviral treatment (β = 0.41, 95%CI = 0.01, 0.82) was positively associated with perceived stigma, and disclosure of serostatus to others was negatively associated with enacted stigma (β = -0.20, 95%CI = -0.34, -0.05). Knowledge of the association between routes of infection and stigma can guide health professionals and policy makers to develop tailored intervention strategies to mitigate the effects of stigma and enhance HIV care utilization among PLWHA in China.

Botulinum toxin injection for hypercontractile or spastic esophageal motility disorders: may high-resolution manometry help to select cases?

PubMed

Marjoux, S; Brochard, C; Roman, S; Gincul, R; Pagenault, M; Ponchon, T; Ropert, A; Mion, F

2015-01-01

Endoscopic injections of botulinum toxin in the cardia or distal esophagus have been advocated to treat achalasia and spastic esophageal motility disorders. We conducted a retrospective study to evaluate whether manometric diagnosis using the Chicago classification in high-resolution manometry (HRM) would be predictive of the clinical response. Charts of patients with spastic and hypertensive motility disorders diagnosed with HRM and treated with botulinum toxin were retrospectively reviewed at two centers. HRM recordings were systematically reanalyzed, and a patient's phone survey was conducted. Forty-five patients treated between 2008 and 2013 were included. Most patients had achalasia type 3 (22 cases). Other diagnoses were jackhammer esophagus (8 cases), distal esophageal spasm (7 cases), esophagogastric junction outflow obstruction (5 cases), nutcracker esophagus (1 case), and 2 unclassified cases. Botulinum toxin injections were performed into the cardia only in 9 cases, into the wall of the distal esophagus in 19 cases, and in both locations (cardia and distal esophagus) in 17 cases. No complication occurred in 31 cases. Chest pain was noticed for less than 7 days in 13 cases. One death related to mediastinitis occurred 3 weeks after botulinum toxin injection. Efficacy was assessed in 42 patients: 71% were significantly improved 2 months after botulinum toxin, and 57% remained satisfied for more than 6 months. No clear difference was observed in terms of response according to manometric diagnosis; however, type 3 achalasia previously dilated and with normal integrated relaxation pressure (4s-integrated relaxation pressure < 15 mmHg) had the worst outcome: none of these patients responded to the endoscopic injection of botulinum toxin. Endoscopic injections of botulinum toxin may be effective in some patients with spastic or hypercontractile esophageal motility disorders. The manometric Chicago classification diagnosis does not seem to predict the results. Prospective randomized trials are required to identify patients most likely to benefit from esophageal botulinum toxin treatment. © 2014 International Society for Diseases of the Esophagus.

Internalized HIV and Drug Stigmas: Interacting Forces Threatening Health Status and Health Service Utilization Among People with HIV Who Inject Drugs in St. Petersburg, Russia

PubMed Central

Burke, Sara E.; Dovidio, John F.; Levina, Olga S.; Uusküla, Anneli; Niccolai, Linda M.; Heimer, Robert

2016-01-01

Marked overlap between the HIV and injection drug use epidemics in St. Petersburg, Russia, puts many people in need of health services at risk for stigmatization based on both characteristics simultaneously. The current study examined the independent and interactive effects of internalized HIV and drug stigmas on health status and health service utilization among 383 people with HIV who inject drugs in St. Petersburg. Participants self-reported internalized HIV stigma, internalized drug stigma, health status (subjective rating and symptom count), health service utilization (HIV care and drug treatment), sociodemographic characteristics, and health/behavioral history. For both forms of internalized stigma, greater stigma was correlated with poorer health and lower likelihood of service utilization. HIV and drug stigmas interacted to predict symptom count, HIV care, and drug treatment such that individuals internalizing high levels of both stigmas were at elevated risk for experiencing poor health and less likely to access health services. PMID:26050155

76 FR 57905 - Implantation or Injectable Dosage Form New Animal Drugs; Ivermectin

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-19

... solution for treatment and control of various internal and external parasites in cattle, swine, reindeer...: John K. Harshman, Center for Veterinary Medicine (HFV-170), Food and Drug Administration, 7500 Standish... of BIMECTIN (ivermectin) Injection for Cattle and Swine for treatment and control of various internal...

Textural variations and fragmentation processes in peperite formed between felsic lava flow and wet substrate: An example from the Cretaceous Buan Volcanics, southwest Korea

NASA Astrophysics Data System (ADS)

Gihm, Yong Sik; Kwon, Chang Woo

2017-02-01

Multiple exposures of peperite within the Cretaceous Buan Volcanics, southwest Korea, have been examined in order to determine variations in their textural characteristics and to investigate their mode of formation. Along undulating boundaries between rhyolite (lava flow) and deformed host sediment expressed as a series of load and flame structures, exposures commonly contain two distinct types of peperite. Type-1 peperites are composed mostly of rounded juvenile clasts at their base and polyhedral juvenile clasts at their upper levels, interpreted to have formed via a two-stage process. Firstly, abrasion of juvenile clasts occurred after their fragmentation due to shear stress imparted by the overlying and still-moving lava flow, forming rounded juvenile clasts. Subsequent in situ quenching fragmentation of the lava flow produced clasts with platy to polyhedral shapes immediately after emplacement of the lava flow. Type-2 peperites laterally extend into the interior of featureless rhyolite as layers that decrease in thickness with increasing distance away from the flame zone. These layers exhibit horizontal textural variations, ranging from poorly sorted mixtures of ash- to block-sized angular juvenile clasts in the proximal zone, to closely packed polyhedral and tabular juvenile clasts with jigsaw-crack textures in the middle and distal zones. Type-2 peperite are inferred to have formed due to internal steam explosions that resulted from an expansion of heated pore water (leading to an increase in pore fluid pressure) that had been vertically injected into the interior of the rhyolite from the flame zone. The proximal zone, composed mainly of poorly sorted mixtures of juvenile clasts, represents the explosion sites. Juvenile clasts in the middle and distal zones are interpreted to have formed due to three separate processes: the development of fractures in the rhyolite during the internal steam explosions, injection of the host sediment through the fractures, and in situ quenching fragmentation. Deformation of the host sediment exerted an important control on peperite-forming processes, with the internal steam explosions suggested to have formed the closely packed, juvenile clasts with a jigsaw-crack texture rather than the clasts that are widely dispersed.

Syringe injectable electronics

PubMed Central

Hong, Guosong; Zhou, Tao; Jin, Lihua; Duvvuri, Madhavi; Jiang, Zhe; Kruskal, Peter; Xie, Chong; Suo, Zhigang; Fang, Ying; Lieber, Charles M.

2015-01-01

Seamless and minimally-invasive three-dimensional (3D) interpenetration of electronics within artificial or natural structures could allow for continuous monitoring and manipulation of their properties. Flexible electronics provide a means for conforming electronics to non-planar surfaces, yet targeted delivery of flexible electronics to internal regions remains difficult. Here, we overcome this challenge by demonstrating syringe injection and subsequent unfolding of submicrometer-thick, centimeter-scale macroporous mesh electronics through needles with a diameter as small as 100 micrometers. Our results show that electronic components can be injected into man-made and biological cavities, as well as dense gels and tissue, with > 90% device yield. We demonstrate several applications of syringe injectable electronics as a general approach for interpenetrating flexible electronics with 3D structures, including (i) monitoring of internal mechanical strains in polymer cavities, (ii) tight integration and low chronic immunoreactivity with several distinct regions of the brain, and (iii) in vivo multiplexed neural recording. Moreover, syringe injection enables delivery of flexible electronics through a rigid shell, delivery of large volume flexible electronics that can fill internal cavities and co-injection of electronics with other materials into host structures, opening up unique applications for flexible electronics. PMID:26053995

Syringe-injectable electronics.

PubMed

Liu, Jia; Fu, Tian-Ming; Cheng, Zengguang; Hong, Guosong; Zhou, Tao; Jin, Lihua; Duvvuri, Madhavi; Jiang, Zhe; Kruskal, Peter; Xie, Chong; Suo, Zhigang; Fang, Ying; Lieber, Charles M

2015-07-01

Seamless and minimally invasive three-dimensional interpenetration of electronics within artificial or natural structures could allow for continuous monitoring and manipulation of their properties. Flexible electronics provide a means for conforming electronics to non-planar surfaces, yet targeted delivery of flexible electronics to internal regions remains difficult. Here, we overcome this challenge by demonstrating the syringe injection (and subsequent unfolding) of sub-micrometre-thick, centimetre-scale macroporous mesh electronics through needles with a diameter as small as 100 μm. Our results show that electronic components can be injected into man-made and biological cavities, as well as dense gels and tissue, with >90% device yield. We demonstrate several applications of syringe-injectable electronics as a general approach for interpenetrating flexible electronics with three-dimensional structures, including (1) monitoring internal mechanical strains in polymer cavities, (2) tight integration and low chronic immunoreactivity with several distinct regions of the brain, and (3) in vivo multiplexed neural recording. Moreover, syringe injection enables the delivery of flexible electronics through a rigid shell, the delivery of large-volume flexible electronics that can fill internal cavities, and co-injection of electronics with other materials into host structures, opening up unique applications for flexible electronics.

Syringe-injectable electronics

NASA Astrophysics Data System (ADS)

Liu, Jia; Fu, Tian-Ming; Cheng, Zengguang; Hong, Guosong; Zhou, Tao; Jin, Lihua; Duvvuri, Madhavi; Jiang, Zhe; Kruskal, Peter; Xie, Chong; Suo, Zhigang; Fang, Ying; Lieber, Charles M.

2015-07-01

Seamless and minimally invasive three-dimensional interpenetration of electronics within artificial or natural structures could allow for continuous monitoring and manipulation of their properties. Flexible electronics provide a means for conforming electronics to non-planar surfaces, yet targeted delivery of flexible electronics to internal regions remains difficult. Here, we overcome this challenge by demonstrating the syringe injection (and subsequent unfolding) of sub-micrometre-thick, centimetre-scale macroporous mesh electronics through needles with a diameter as small as 100 μm. Our results show that electronic components can be injected into man-made and biological cavities, as well as dense gels and tissue, with >90% device yield. We demonstrate several applications of syringe-injectable electronics as a general approach for interpenetrating flexible electronics with three-dimensional structures, including (1) monitoring internal mechanical strains in polymer cavities, (2) tight integration and low chronic immunoreactivity with several distinct regions of the brain, and (3) in vivo multiplexed neural recording. Moreover, syringe injection enables the delivery of flexible electronics through a rigid shell, the delivery of large-volume flexible electronics that can fill internal cavities, and co-injection of electronics with other materials into host structures, opening up unique applications for flexible electronics.

Optimizing Injection Molding Parameters of Different Halloysites Type-Reinforced Thermoplastic Polyurethane Nanocomposites via Taguchi Complemented with ANOVA

PubMed Central

Gaaz, Tayser Sumer; Sulong, Abu Bakar; Kadhum, Abdul Amir H.; Nassir, Mohamed H.; Al-Amiery, Ahmed A.

2016-01-01

Halloysite nanotubes-thermoplastic polyurethane (HNTs-TPU) nanocomposites are attractive products due to increasing demands for specialized materials. This study attempts to optimize the parameters for injection just before marketing. The study shows the importance of the preparation of the samples and how well these parameters play their roles in the injection. The control parameters for injection are carefully determined to examine the mechanical properties and the density of the HNTs-TPU nanocomposites. Three types of modified HNTs were used as untreated HNTs (uHNTs), sulfuric acid treated (aHNTs) and a combined treatment of polyvinyl alcohol (PVA)-sodium dodecyl sulfate (SDS)-malonic acid (MA) (treatment (mHNTs)). It was found that mHNTs have the most influential effect of producing HNTs-TPU nanocomposites with the best qualities. One possible reason for this extraordinary result is the effect of SDS as a disperser and MA as a crosslinker between HNTs and PVA. For the highest tensile strength, the control parameters are demonstrated at 150 °C (injection temperature), 8 bar (injection pressure), 30 °C (mold temperature), 8 min (injection time), 2 wt % (HNTs loading) and mHNT (HNTs type). Meanwhile, the optimized combination of the levels for all six control parameters that provide the highest Young’s modulus and highest density was found to be 150 °C (injection temperature), 8 bar (injection pressure), 32 °C (mold temperature), 8 min (injection time), 3 wt % (HNTs loading) and mHNT (HNTs type). For the best tensile strain, the six control parameters are found to be 160 °C (injection temperature), 8 bar (injection pressure), 32 °C (mold temperature), 8 min (injection time), 2 wt % (HNTs loading) and mHNT (HNTs type). For the highest hardness, the best parameters are 140 °C (injection temperature), 6 bar (injection pressure), 30 °C (mold temperature), 8 min (injection time), 2 wt % (HNTs loading) and mHNT (HNTs type). The analyses are carried out by coordinating Taguchi and ANOVA approaches. Seemingly, mHNTs has shown its very important role in the resulting product. PMID:28774069

Optimizing Injection Molding Parameters of Different Halloysites Type-Reinforced Thermoplastic Polyurethane Nanocomposites via Taguchi Complemented with ANOVA.

PubMed

Gaaz, Tayser Sumer; Sulong, Abu Bakar; Kadhum, Abdul Amir H; Nassir, Mohamed H; Al-Amiery, Ahmed A

2016-11-22

Halloysite nanotubes-thermoplastic polyurethane (HNTs-TPU) nanocomposites are attractive products due to increasing demands for specialized materials. This study attempts to optimize the parameters for injection just before marketing. The study shows the importance of the preparation of the samples and how well these parameters play their roles in the injection. The control parameters for injection are carefully determined to examine the mechanical properties and the density of the HNTs-TPU nanocomposites. Three types of modified HNTs were used as untreated HNTs ( u HNTs), sulfuric acid treated ( a HNTs) and a combined treatment of polyvinyl alcohol (PVA)-sodium dodecyl sulfate (SDS)-malonic acid (MA) (treatment ( m HNTs)). It was found that m HNTs have the most influential effect of producing HNTs-TPU nanocomposites with the best qualities. One possible reason for this extraordinary result is the effect of SDS as a disperser and MA as a crosslinker between HNTs and PVA. For the highest tensile strength, the control parameters are demonstrated at 150 °C (injection temperature), 8 bar (injection pressure), 30 °C (mold temperature), 8 min (injection time), 2 wt % (HNTs loading) and m HNT (HNTs type). Meanwhile, the optimized combination of the levels for all six control parameters that provide the highest Young's modulus and highest density was found to be 150 °C (injection temperature), 8 bar (injection pressure), 32 °C (mold temperature), 8 min (injection time), 3 wt % (HNTs loading) and m HNT (HNTs type). For the best tensile strain, the six control parameters are found to be 160 °C (injection temperature), 8 bar (injection pressure), 32 °C (mold temperature), 8 min (injection time), 2 wt % (HNTs loading) and m HNT (HNTs type). For the highest hardness, the best parameters are 140 °C (injection temperature), 6 bar (injection pressure), 30 °C (mold temperature), 8 min (injection time), 2 wt % (HNTs loading) and m HNT (HNTs type). The analyses are carried out by coordinating Taguchi and ANOVA approaches. Seemingly, m HNTs has shown its very important role in the resulting product.

Influence of needle bevel design on injection pain and needle deformation in dental local infiltration anaesthesia - randomized clinical trial.

PubMed

Dau, M; Buttchereit, I; Ganz, C; Frerich, B; Anisimova, E N; Daubländer, M; Kämmerer, P W

2017-11-01

The aims of this in vivo study were to evaluate the impact of needle bevel design on patients' pain perception and the mechanical deformation of the needle tip after the injection. In a prospective single-blinded trial, 150 patients received conventional infiltration anaesthesia for dental treatment by one examiner. Patients were randomized for one out of three different needle bevel types (scalpel-designed bevel needle (SB), n=50; triple bevel needle (TB), n=50; regular bevel needle (RB), n=50). Subjects' self-reported injection pain perception was evaluated using a numeric rating scale (NRS). For each needle tip, deformations after single use were measured using SEM. A significant lower injection pain level was found in SB (mean 2.1±1.2) than in TB (mean 3.5±1.6;) and RB (mean 3.4±1.0; all P<0.001). A needle deformation was detected in about 97.3% of all needles (SB 50/50, TB 50/50, and RB: 46/50). A higher number of barbs were found in SB (29/50) versus TB (17/50) and RB (19/50). For dental local infiltration anaesthesia, injection needles with a scalpel-designed bevel demonstrated significantly less injection pain. Needle tip deflections after anaesthetic agent infiltration, especially barbed hooks on the non-cutting edge may result in greater soft tissue trauma. Copyright © 2017 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Visualization of diffusion of the drug solution during aluminum potassium tannic acid injection therapy: a pilot study.

PubMed

Yamamoto, Yutaka; Miwa, Mitsuharu

2013-06-01

Sclerotherapy with aluminum potassium tannic acid (ALTA), which was approved in Japan for the treatment of internal hemorrhoids in July 2004 (Takano et al., Int J Colorectal Dis 21:44-51, 2006), has been widely accepted because of its effectiveness and low invasiveness. More than 200,000 patients have received ALTA injection therapy. ALTA is injected directly into 4 points of an internal hemorrhoid (4-step injection) to induce sclerosis and remission of the hemorrhoids, and consequently, resolution of symptoms such as prolapse and bleeding. The precision of the 4-step injection is considered to be a crucial determinant of the success of this therapy and the risk of complications. However, sufficient evidence has not yet been obtained concerning the diffusion and distribution of the injected drug. A pilot study visualized the real-time diffusion/distribution of the drug solution following the 4-step injection, using the ICG (indocyanine green) fluorescence technique, and an infrared camera (Photodynamic EYE; PDE, Hamamatsu Photonics K.K.).

Liquid rocket engine self-cooled combustion chambers

NASA Technical Reports Server (NTRS)

1977-01-01

Self-cooled combustion chambers are chambers in which the chamber wall temperature is controlled by methods other than fluid flow within the chamber wall supplied from an external source. In such chambers, adiabatic wall temperature may be controlled by use of upstream fluid components such as the injector or a film-coolant ring, or by internal flow of self-contained materials; e.g. pyrolysis gas flow in charring ablators, and the flow of infiltrated liquid metals in porous matrices. Five types of self-cooled chambers are considered in this monograph. The name identifying the chamber is indicative of the method (mechanism) by which the chamber is cooled, as follows: ablative; radiation cooled; internally regenerative (Interegen); heat sink; adiabatic wall. Except for the Interegen and heat sink concepts, each chamber type is discussed separately. A separate and final section of the monograph deals with heat transfer to the chamber wall and treats Stanton number evaluation, film cooling, and film-coolant injection techniques, since these subjects are common to all chamber types. Techniques for analysis of gas film cooling and liquid film cooling are presented.

Photoelectric characteristics of an inverse U-shape buried doping design for crosstalk suppression in pinned photodiodes

NASA Astrophysics Data System (ADS)

Chen, Cao; Bing, Zhang; Xin, Li; Longsheng, Wu; Junfeng, Wang

2014-11-01

A design of an inverse U-shape buried doping in a pinned photodiode (PPD) of CMOS image sensors is proposed for electrical crosstalk suppression between adjacent pixels. The architecture achieves no extra fill factor consumption, and proper built-in electric fields can be established according to the doping gradient created by the injections of the extremely low P-type doping buried regions in the epitaxial layer, causing the excess electrons to easily drift back to the photosensitive area rarely with a diffusion probability; the overall junction capacitance and photosensitive area extensions for a full well capacity (FWC) and internal quantum efficiency (IQE) improving are achieved by the injection of a buried N-type doping. By considering the image lag issue, the process parameters of all the injections have been precisely optimized. Optical simulation results based on the finite difference time domain method show that compared to the conventional PPD, the electrical crosstalk rate of the proposed architecture can be decreased by 60%-80% at an incident wavelength beyond 450 nm, IQE can be clearly improved at an incident wavelength between 400 and 600 nm, and the FWC can be enhanced by 107.5%. Furthermore, the image lag performance is sustained to a perfect low level. The present study provides important guidance on the design of ultra high resolution image sensors.

Improved electron injection in all-solution-processed n-type organic field-effect transistors with an inkjet-printed ZnO electron injection layer

NASA Astrophysics Data System (ADS)

Roh, Jeongkyun; Kim, Hyeok; Park, Myeongjin; Kwak, Jeonghun; Lee, Changhee

2017-10-01

Interface engineering for the improved injection properties of all-solution-processed n-type organic field-effect transistors (OFETs) arising from the use of an inkjet-printed ZnO electron injection layer were demonstrated. The characteristics of ZnO in terms of electron injection and transport were investigated, and then we employed ZnO as the electron injection layer via inkjet-printing during the fabrication of all-solution-processed, n-type OFETs. With the inkjet-printed ZnO electron injection layer, the devices exhibited approximately five-fold increased mobility (0.0058 cm2/V s to 0.030 cm2/V s), more than two-fold increased charge concentration (2.76 × 1011 cm-2 to 6.86 × 1011 cm-2), and two orders of magnitude reduced device resistance (120 MΩ cm to 3 MΩ cm). Moreover, n-type polymer form smoother film with ZnO implying denser packing of polymer, which results in higher mobility.

Delayed Antitoxin Treatment of Two Adult Patients with Botulism after Cosmetic Injection of Botulinum Type A Toxin.

PubMed

Fan, Kit-Ling; Wang, Yan-Li; Chu, Gary; Leung, Ling-Pong

2016-12-01

Injection of botulinum toxin type A for cosmetic purposes is common. It is believed to be safe, but adverse reactions have been reported, including dysphagia, generalized paralysis, respiratory depression, and death caused by focal injection of the toxin. Early administration of antitoxin in patients with adverse reactions is the mainstay of management, but the time window for its clinical efficacy is not well defined. Two female adult patients with clinical botulism after botulinum toxin type A injection are described. Both patients had received intramuscular injection of botulinum toxin type A in their calves at beauty shops for cosmetic reasons. They developed clinical botulism about 3 days postinjection. They presented late to the emergency department. Monovalent type A botulinum antitoxin was administered 7 and 9 days from symptom onset, respectively. Both patients showed clinical improvement after the antitoxin treatment. WHY SHOULD AN EMERGENCY PHYSICIAN BE AWARE OF THIS?: Patients may present to the emergency department with systemic effects of botulinum toxin type A after cosmetic injection. Clinical efficacy of botulinum antitoxin treatment was observed in two patients who were given the drug 7 and 9 days after the occurrence of symptoms of botulism after cosmetic injection of botulinum toxin type A. It may be worthwhile to commence antitoxin treatment even if patients present late. Copyright © 2016 Elsevier Inc. All rights reserved.

Deep anterior lamellar keratoplasty: dissection plane with viscoelastic and air can be different.

PubMed

Ross, Andrew R; Said, Dalia G; El-Amin, Abdalla; Altaan, Saif; Cabrerizo, Javier; Nubile, Mario; Hogan, Emily; Mastropasqua, Leonardo; Dua, Harminder Singh

2018-04-03

To investigate and define the nature of big bubbles (BB) formed by injection of viscoelastic in deep anterior lamellar keratoplasty. Intrastromal injections of 0.1 and 0.3 mL of sodium hyaluronate 1.2% and 0.6% were made into sclera-corneal discs (n = 32) at superficial (anterior-third), midstromal (middle-third) and deep (posterior-third) levels to simulate deep anterior lamellar keratoplasty. Postinjection optical coherence tomograms (OCT) were obtained with the needle in situ. The samples were sectioned and examined histologically. Twelve control samples were injected with air. With superficial injections (n=8) only intrastromal accumulation of viscoelastic was noted. With midstromal injections (n=10) intrastromal accumulation of viscoelastic (n=6) and intrastromal big bubbles (IBB) (n=4) with substantial and variable stromal tissue in the walls were noted. No type 1, type 2 or mixed BB were noted. With deep injections (n=14), type 1 BB (n=4), IBB (n=4) and mixed BB (n=6) were obtained.There was no difference in the results with the two different concentrations of viscoelastic used. With air injection (n=12), 10 type 1 and 1 type 2 BB and 1 mixed BB were obtained. No IBB was noted. BB obtained by injection of viscoelastic and air can be different. The former tends to occur at the site of injection, especially with midstromal injections, takes the form of tissue separation by stretch and tearing and does not cleave in a consistent plane like air. Surgeons should be aware of IBB created by viscodissection and not confuse it for a type1 BB. Intraoperative OCT should help identify IBB. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Internalization of Carbon Nano-onions by Hippocampal Cells Preserves Neuronal Circuit Function and Recognition Memory.

PubMed

Trusel, Massimo; Baldrighi, Michele; Marotta, Roberto; Gatto, Francesca; Pesce, Mattia; Frasconi, Marco; Catelani, Tiziano; Papaleo, Francesco; Pompa, Pier Paolo; Tonini, Raffaella; Giordani, Silvia

2018-05-23

One area where nanomedicine may offer superior performances and efficacy compared to current strategies is in the diagnosis and treatment of central nervous system (CNS) diseases. However, the application of nanomaterials in such complex arenas is still in its infancy and an optimal vector for the therapy of CNS diseases has not been identified. Graphitic carbon nano-onions (CNOs) represent a class of carbon nanomaterials that shows promising potential for biomedical purposes. To probe the possible applications of graphitic CNOs as a platform for therapeutic and diagnostic interventions on CNS diseases, fluorescently labeled CNOs were stereotaxically injected in vivo in mice hippocampus. Their diffusion within brain tissues and their cellular localization were analyzed ex vivo by confocal microscopy, electron microscopy, and correlative light-electron microscopy techniques. The subsequent fluorescent staining of hippocampal cells populations indicates they efficiently internalize the nanomaterial. Furthermore, the inflammatory potential of the CNOs injection was found comparable to sterile vehicle infusion, and it did not result in manifest neurophysiological and behavioral alterations of hippocampal-mediated functions. These results clearly demonstrate that CNOs can interface effectively with several cell types, which encourages further their development as possible brain disease-targeted diagnostics or therapeutics nanocarriers.

On the Hole Injection for III-Nitride Based Deep Ultraviolet Light-Emitting Diodes.

PubMed

Li, Luping; Zhang, Yonghui; Xu, Shu; Bi, Wengang; Zhang, Zi-Hui; Kuo, Hao-Chung

2017-10-24

The hole injection is one of the bottlenecks that strongly hinder the quantum efficiency and the optical power for deep ultraviolet light-emitting diodes (DUV LEDs) with the emission wavelength smaller than 360 nm. The hole injection efficiency for DUV LEDs is co-affected by the p-type ohmic contact, the p-type hole injection layer, the p-type electron blocking layer and the multiple quantum wells. In this report, we review a large diversity of advances that are currently adopted to increase the hole injection efficiency for DUV LEDs. Moreover, by disclosing the underlying device physics, the design strategies that we can follow have also been suggested to improve the hole injection for DUV LEDs.

On the Hole Injection for III-Nitride Based Deep Ultraviolet Light-Emitting Diodes

PubMed Central

Li, Luping; Zhang, Yonghui; Kuo, Hao-Chung

2017-01-01

The hole injection is one of the bottlenecks that strongly hinder the quantum efficiency and the optical power for deep ultraviolet light-emitting diodes (DUV LEDs) with the emission wavelength smaller than 360 nm. The hole injection efficiency for DUV LEDs is co-affected by the p-type ohmic contact, the p-type hole injection layer, the p-type electron blocking layer and the multiple quantum wells. In this report, we review a large diversity of advances that are currently adopted to increase the hole injection efficiency for DUV LEDs. Moreover, by disclosing the underlying device physics, the design strategies that we can follow have also been suggested to improve the hole injection for DUV LEDs. PMID:29073738

Rates of fuel discharge as affected by the design of fuel-injection systems for internal-combustion engines

NASA Technical Reports Server (NTRS)

Gelalles, A G; Marsh, E T

1933-01-01

Using the method of weighing fuel collected in a receiver during a definite interval of the injection period, rates of discharge were determined, and the effects noted, when various changes were made in a fuel-injection system. The injection system consisted primarily of a by-pass controlled fuel pump and an automatic injection valve. The variables of the system studied were the pump speed, pump-throttle setting, discharge-orifice diameter, injection-valve opening and closing pressures, and injection-tube length and diameter.

Variable N-type negative resistance in an injection-gated double-injection diode

NASA Technical Reports Server (NTRS)

Kapoor, A. K.; Henderson, H. T.

1981-01-01

Double-injection (DI) switching devices consist of p+ and n+ contacts (for hole and electron injection, respectively), separated by a near intrinsic semiconductor region containing deep traps. Under proper conditions, these devices exhibit S-type differential negative resistance (DNR) similar to silicon-controlled rectifiers. With the added influence of a p+ gate appropriately placed between the anode (p+) and cathode (n+), the current-voltage characteristic of the device has been manipulated for the first time to exhibit a variable N-type DNR. The anode current and the anode-to-cathode voltage levels at which this N-type DNR is observed can be varied by changing the gate-to-cathode bias. In essence, the classical S-type DI diode can be electronically transformed into an N-type diode. A first-order phenomenological model is proposed for the N-type DNR.

Evolution of the global use of unsafe medical injections, 2000-2010.

PubMed

Pépin, Jacques; Abou Chakra, Claire Nour; Pépin, Eric; Nault, Vincent

2013-01-01

Since 1999, substantial efforts have been made by the international community to reduce the risks associated with unsafe injections, through ministries of health, international donors, the World Health Organization and the Safe Injection Global Network. The present study attempted to measure the progress, or lack thereof, made over the 2000-2010 decade in reducing unsafe injections in ten regions of the world corresponding to developing and transitional economies. Data about the number of injections per person per year and the proportion of re-use of syringes and needles were obtained for 2010, mainly from population surveys, and compared with previous estimates for 2000 which had used various sources of information including injection safety assessments, population surveys and published studies on injection practices. From 2000 to 2010, in developing countries and transitional economies, the average number of injections per person per year decreased from 3.40 to 2.88, while the proportion of re-use of injection devices dropped from 39.8% to 5.5%. Combining both factors the number of unsafe injections per person per year decreased from 1.35 to 0.16. Even if substantial progress has been made, the Eastern Mediterranean region remains problematic, with 0.57 unsafe injections per person per year. In sub-Saharan Africa and Latin America, people now receive on average only 0.04-0.05 unsafe injections per year. Substantial progress has been made in reducing the number of unsafe injections in developing countries and transitional economies, essentially through a reduction in the re-use of injection devices. In some regions, elimination of unsafe injections might become a reasonable goal.

Behavioral fever in newborn rabbits

NASA Technical Reports Server (NTRS)

Satinoff, E.; Mcewen, G. N., Jr.; Williams, B. A.

1976-01-01

New Zealand white rabbit pups aged 12 to 72 hr were divided into three groups and given an intraperitoneal injection of Pseudomonas polysaccharide, a saline vehicle alone, and no treatment, respectively. The animals injected with pyrogen and maintained at an ambient temperature of 32 C for 2 hr did not develop fever. When placed in a thermally graded alleyway, the animals injected with pyrogen selected gradient positions that represented significantly higher temperatures than controls injected with saline. Further stay at selected positions for 5 min caused a considerable increase in the rectal temperature of the pyrogen-injected pups but not that of controls. The results support the hypothesis that newborn rabbits will develop a fever by behavioral means after a single injection of an exogenous pyrogen if the opportunity for thermoregulatory behavior is present. No fever develops if the pups must rely solely on internal thermoregulatory mechanisms. The behavioral system for producing a fever is mature at birth, but an adequate system of internal reflexes does not appear to develop for some days.

Comparison of incidence of intravascular injections during transforaminal epidural steroid injection using different needle types

PubMed Central

Lee, Yong Ho

2014-01-01

Background Infrequent but serious complications of transforaminal epidural steroid injection (TFESI) occur due to inadvertent intravascular injections. A few studies reported that the different needle types can influence on the occurrences of intravascular incidence in TFESI. This study prospectively evaluated whether short-bevel needle can reduce the incidences of intravascular injection of TFESI compared to long-bevel needles. Methods From March 2013 to December 2013, 239 consecutive patients were enrolled and received 249 fluoroscopically guided TFESI using the classic technique. Confirmation of intravascular spread was done initially with real time fluoroscopy and then with digital subtraction angiography method in a same patient. Injection technique for TFESI was the same for both short-bevel and long-bevel needle types. Results The incidences of intravascular injections with the long-bevel and short-bevel needles were 15.0% (21/140) and 9.2% (4/140), respectively. More than half of intravascular injections occurred simultaneously with epidural injections (8.0%, 20/249). There were no statistically significant differences between the long-bevel and the short-bevel needles in the rates of intravascular injections (P = 0.17). Conclusions Short-bevel needles did not demonstrate any benefits in reducing the incidence of intravascular injection. PMID:25302096

Autologous platelet lysates local injections for treatment of tibia non-union with breakage of the nickelclad: a case report.

PubMed

Jiang, Hong-Jiang; Tan, Xun-Xiang; Ju, Hai-Yang; Su, Jin-Ping; Yan, Wei; Song, Xiu-Gang; Qin, Li-Wu; Ju, Chang-Jun; Wang, Ling-Shuang; Zou, De-Bao

2016-01-01

Nonunions of the tibia represent challenging orthopedic problems, which require the surgeon to analyze numerous factors and choose an appropriate treatment. This article presents a case report of tibia and fibula fracture patient who failed the internal fixation surgery and successfully recovered after one course of percutaneous autologous platelet lysates injection. The patient received an internal nickelclad breakage at 9 months post-surgery but reluctant to accept a second surgery, then autologous platelet lysates (APL) injection which is a less invasive method was recommended. The injections were carried once a week for three times. Radiologic evaluation was conducted every month until recovery. To the best of our knowledge, this is the first reported case of tibia delayed union with breakage of the plate resolved with APL injection. Improved clinical evidence was observed at 4 and 6 months after injection. The patient got good bony union at 8 months post-injection. The patient didn't feel any discomfort postinjection, no complications such as infection, refracture etc. were observed. APL percutaneous injection could be a new therapeutic option for the treatment of nonunion or delayed healing fractures.

Compatibility and Stability of VARUBI (Rolapitant) Injectable Emulsion Admixed with Intravenous Granisetron Hydrochloride.

PubMed

Wu, George; Powers, Dan; Yeung, Stanley; Chen, Frank; Neelon, Kelly

2018-01-01

Prophylaxis or therapy with a combination of a neurokinin 1 (NK-1) receptor antagonist (RA), a 5-hydroxytryptamine- 3 (5-HT3) RA, and dexamethasone is recommended by international antiemesis guidelines for the prevention of chemotherapy-induced nausea and vomiting for patients receiving highly emetogenic chemotherapy and for select patients receiving moderately emetogenic chemotherapy. VARUBI (rolapitant) is a substance P/NK-1 RA that was recently approved by the U.S. Food and Drug Administration as an injectable emulsion in combination with other antiemetic agents in adults for the prevention of delayed nausea and vomiting associated with initial and repeat courses of emetogenic cancer chemotherapy, including, but not limited to, highly emetogenic chemotherapy. Granisetron Hydrochloride Injection USP is one of the 5-HT3 RAs indicated for the prevention of nausea and/or vomiting associated with initial and repeat courses of emetogenic cancer therapy, including high-dose cisplatin. Herein, we describe the physical and chemical compatibility and stability of VARUBI (rolapitant) injectable emulsion (166.5 mg/92.5 mL [1.8 mg/mL], equivalent to 185 mg of rolapitant hydrochloride) admixed with Granisetron Hydrochloride Injection USP (1.0 mg/mL, equivalent to 1.12 mg/mL hydrochloride). Binary admixtures of VARUBI injectable emulsion and Granisetron Hydrochloride Injection USP were prepared and stored in VARUBI ready-to-use glass vials and in four types of commonly used intravenous administration (tubing) sets. Evaluation of the physical and chemical compatibility and stability of the admixtures in the VARUBI ready-to-use vials stored at room temperature (20°C to 25°C) under fluorescent light and under refrigeration (2°C to 8°C protected from light) was conducted at 0, 1, 6, 24, and 48 hours, and that of the admixtures in the intravenous tubing sets was evaluated at 0, 2, and 6 hours of storage at 20°C to 25°C. Physical stability was evaluated by visual examination of the container contents under normal room light, and measurement of turbidity, globule size, and particulate matter. Chemical stability was assessed by measuring the pH of the admixture and determining drug concentrations (potency) and impurity levels by high-performance liquid chromatographic analysis. The pH, turbidity, globule size, and particulate matter of all samples remained within narrow and acceptable ranges at all study time points, indicating that combining the two formulations into a binary admixture is physically and chemically compatible and stable. VARUBI injectable emulsion admixed with Granisetron Hydrochloride Injection USP demonstrated compatibility and stability in a ready-to-use glass vial for at least 24 hours at room temperature and 48 hours under refrigeration, as well as in the four intravenous tubing sets for at least 6 hours at 20°C to 25°C. No decrease of drug concentration (or potency) of any admixed components occurred in the samples stored at the two conditions and time periods studied based on high-performance liquid chromatographic analysis. The levels of impurities stayed below the safety limits set by International Conference on Harmonisation during the study period. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

The value of physical examination in the diagnosis of hip osteoarthritis.

PubMed

Chong, Timothy; Don, Darren W; Kao, Ming-Chih; Wong, Dexter; Mitra, Raj

2013-01-01

To compare the sensitivity of physical examination (internal rotation of the hip) with radiographs (using the Kellgren-Lawrence grading scale) in the diagnosis of clinically significant hip osteoarthritis. Case Series, Retrospective chart review of hip pain patients that underwent fluoroscopically guided hip steroid and anesthetic injections. 10 patients with hip pain patients seen at an academic outpatient center over a 2 year period were analyzed. Fluoroscopically guided hip steroid and anesthetic injection. Pain relief and change in VAS pain score after intra-articular hip steroid and lidocaine injection was the main outcome measure. Based on Fisher's exact test, there was no association between severity of radiographic hip arthritis and pain relief with intra-articular anesthetic/steroid injection (p=0.45). Physical examination (provocative hip internal rotation) however was associated with a significant decrease in VAS pain score after intra-articular lidocaine and corticosteroid hip injection (p=0.022). Simple hip radiographs alone are not sufficient to diagnose clinically significant hip osteoarthritis. Physical examination (hip internal rotation) was found to be more accurate than simple radiographs in the diagnosis of clinically significant hip osteoarthritis. Radiographs seem to best utilized when they are an extension of the physical examination and patient history.

Distal Hemorrhoidectomy With ALTA Injection: A New Method for Hemorrhoid Surgery

PubMed Central

Abe, Tatsuya; Hachiro, Yoshikazu; Ebisawa, Yoshiaki; Hishiyama, Houhei; Kunimoto, Masao

2014-01-01

Aluminum potassium sulfate and tannic acid injection (ALTA) is a useful and less-invasive treatment for internal hemorrhoids. However, it is not a treatment option for external hemorrhoidal diseases, including mixed hemorrhoids. Distal hemorrhoidectomy with ALTA injection involves surgical resection of external piles, followed by injection therapy on internal piles. We report technical details and the short-term results of this procedure in patients with mixed hemorrhoids. Seventy-two patients with mixed hemorrhoids treated between 2010 and 2011 were included. The main outcome measures were the short-term response and complication rates. At 28 days after surgery, the disappearance rate of prolapse was 100%. Three patients (4%) had postoperative complications, all minor in nature. No prolapse recurrence was observed within a median follow-up period of 6 months. Distal hemorrhoidectomy with ALTA injection appears to be a promising treatment option for patients with mixed hemorrhoids. PMID:24833156

Demonstration of efficient spin injection and detection in various systems using Fe{sub 3}O{sub 4} based spin injectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bhat, Shwetha G., E-mail: shwethabhat@physics.iisc.ernet.in; Anil Kumar, P. S.

2016-05-15

Half-metal based spin injector devices for spin injection and detection application have proven to be efficient owing to their enhanced injection and detection efficiency. In this study, we extend the all-electrical spin injection and detection studies into different systems like Si and GaAs using half-metal Fe{sub 3}O{sub 4} as a spin injector in the presence and absence of tunnel barrier MgO. Injection into GaAs is verified using conventional Fe/MgO/GaAs devices. Room temperature spin injection into both p-type and n-type Si is achieved and the spin injection could be observed down to 100 K. Obtained spin relaxation time for these n-typemore » and p-type Si at different temperatures agree well with the existing reports. Further, the temperature dependent spin injection and detection is also successfully achieved in Fe{sub 3}O{sub 4}/GaAs (n-type) Schottky devices, and a comparison study of the results with control experiment using Fe/MgO/GaAs (n-type) devices confirm the relaxation to be similar in the GaAs substrate, as expected. Hence, even Fe{sub 3}O{sub 4} material can be effectively used as an efficient spin injector as well as detector, making it an attractive candidate for the room temperature spintronics device applications.« less

Changes of hypertonic saline-induced masseter muscle pain characteristics, by an infusion of the serotonin receptor type 3 antagonist granisetron.

PubMed

Christidis, Nikolaos; Ioannidou, Kiriaki; Milosevic, Milena; Segerdahl, Märta; Ernberg, Malin

2008-10-01

This study aimed to investigate whether granisetron reduces masseter muscle pain and allodynia induced by hypertonic saline. Fifteen healthy women and 15 age-matched healthy men participated in this randomized, placebo-controlled, double-blinded study. They first received bilateral injections of hypertonic saline into the masseter muscles (internal control). The evoked pain intensity and the pressure-pain threshold (PPT) were recorded during 30 minutes. Granisetron was then injected on one side and placebo (normal saline) on the contralateral side. Two minutes thereafter, the hypertonic saline injections were repeated. Pain and PPT were again recorded. The first injection of hypertonic saline induced pain of similar intensity, duration, and pain area on both sides, but with larger pain area in the women (P = .017). The PPT did not change significantly. The second injection of hypertonic saline induced considerably less pain (62.5%), of shorter duration (44.1%), and of smaller area (77.4%) on the side pretreated with granisetron (P = .005). The PPT was increased on the granisetron side in the men (P = .002). The results of this study show that local injection of a single dose of granisetron attenuates masseter muscle pain induced by hypertonic saline. This article presents the changes of hypertonic saline-induced masseter muscle pain characteristics by infusion of granisetron. It appears that the pain-inducing effect in this experimental pain model is partly due to activation of 5-HT3-receptors. Hence, the results indicate that granisetron might offer a new treatment approach for localized myofascial pain.

Fluid Mechanics and Heat Transfer of Liquid Precursor Droplets Injected into High-Temperature Plasmas

NASA Astrophysics Data System (ADS)

Basu, Saptarshi; Jordan, Eric H.; Cetegen, Baki M.

2008-03-01

Thermo-physical processes in liquid ceramic precursor droplets in plasma were modeled. Models include aerodynamic droplet break-up, droplet transport, as well as heat and mass transfer within individual droplets. Droplet size, solute concentration, and plasma temperature effects are studied. Results are discussed with the perspective of selecting processing conditions and injection parameters to obtain certain types of coating microstructures. Small droplets (<5 microns) are found to undergo volumetric precipitation and coating deposition with small unpyrolized material. Droplets can be made to undergo shear break-up by reducing surface tension and small droplets promote volumetric precipitation. Small particles reach substrate as molten splats resulting in denser coatings. Model predicts that larger droplets (>5 microns) tend to surface precipitate-forming shells with liquid core. They may be subjected to internal pressurization leading to shattering of shells and secondary atomization of liquid within. They arrive at the substrate as broken shells and unpyrolized material.

Is testosterone replacement therapy in males with hypogonadism cost-effective? An analysis in Sweden.

PubMed

Arver, Stefan; Luong, Ba; Fraschke, Anina; Ghatnekar, Ola; Stanisic, Sanja; Gultyev, Dmitry; Müller, Elvira

2014-01-01

Testosterone replacement therapy (TRT) has been recommended for the treatment of primary and secondary hypogonadism. However, long-term implications of TRT have not been investigated extensively. The aim of this analysis was to evaluate health outcomes and costs associated with life-long TRT in patients suffering from Klinefelter syndrome and late-onset hypogonadism (LOH). A Markov model was developed to assess cost-effectiveness of testosterone undecanoate (TU) depot injection treatment compared with no treatment. Health outcomes and associated costs were modeled in monthly cycles per patient individually along a lifetime horizon. Modeled health outcomes included development of type 2 diabetes, depression, cardiovascular and cerebrovascular complications, and fractures. Analysis was performed for the Swedish health-care setting from health-care payer's and societal perspective. One-way sensitivity analyses evaluated the robustness of results. The main outcome measures were quality-adjusted life-years (QALYs) and total cost in TU depot injection treatment and no treatment cohorts. In addition, outcomes were also expressed as incremental cost per QALY gained for TU depot injection therapy compared with no treatment (incremental cost-effectiveness ratio [ICER]). TU depot injection compared to no-treatment yielded a gain of 1.67 QALYs at an incremental cost of 28,176 EUR (37,192 USD) in the Klinefelter population. The ICER was 16,884 EUR (22,287 USD) per QALY gained. Outcomes in LOH population estimated benefits of TRT at 19,719 EUR (26,029 USD) per QALY gained. Results showed to be considerably robust when tested in sensitivity analyses. Variation of relative risk to develop type 2 diabetes had the highest impact on long-term outcomes in both patient groups. This analysis suggests that lifelong TU depot injection therapy of patients with hypogonadism is a cost-effective treatment in Sweden. Hence, it can support clinicians in decision making when considering appropriate treatment strategies for patients with testosterone deficiency. © 2013 International Society for Sexual Medicine.

Short-term efficacy of sacroiliac joint corticosteroid injection based on arthrographic contrast patterns.

PubMed

Scholten, Paul M; Patel, Shounuck I; Christos, Paul J; Singh, Jaspal R

2015-04-01

To determine the relationship between sacroiliac joint (SIJ) contrast dispersal patterns during SIJ corticosteroid injection and pain relief at 2 and 8 weeks after the procedure. The association between the number of positive provocative SIJ physical examination maneuvers (minimum of one in all patients undergoing SIJ injection) and the patient's response to the intervention was also assessed. Retrospective chart review. Academic outpatient musculoskeletal practice. Fifty-four subjects who underwent therapeutic SIJ corticosteroid injection were screened for inclusion; 49 subjects were included in the final analysis. A retrospective review of electronic medical records identified patients who underwent SIJ corticosteroid injection. Fluoroscopic contrast flow patterns were categorized as type I (intra-articular injection with cephalad extension within the SIJ) or type II (intra-articular injection with poor cephalad extension). Self-reported numeric pain rating scale (NPRS) values at the time of injection and 2 and 8 weeks after the procedure were recorded. The number of positive provocative SIJ physical examination maneuvers at the time of the initial evaluation was also recorded. The primary outcome measure was the effect of contrast patterns (type I or type II) on change in NPRS values at 2 weeks and 8 weeks after the injection. The secondary outcome measure was the association between the number of positive provocative SIJ physical examination maneuvers and decrease in the level of pain after the procedure. At 2 weeks after the procedure, type I subjects demonstrated a significantly lower mean NPRS value compared with type II subjects (2.8 ± 1.4 versus 3.8 ± 1.6, respectively, P = .02). No statistically significant difference was observed at 8 weeks after the procedure. NPRS values were significantly reduced both at 2 weeks and 8 weeks, compared with baseline, in both subjects identified as having type I flow and those with type II flow (P < .0001 for all within-group comparisons). Fluoroscopically guided corticosteroid injections into the SIJ joint are effective in decreasing NPRS values in patients with SIJ-mediated pain. Delivery of corticosteroid to the superior portion of the SIJ leads to a greater reduction in pain at 2 weeks, but not at 8 weeks. Patients with at least one positive provocative maneuver should benefit from an intra-articular corticosteroid injection. Copyright © 2015 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.

Evolution of the Global Use of Unsafe Medical Injections, 2000–2010

PubMed Central

Pépin, Jacques; Abou Chakra, Claire Nour; Pépin, Eric; Nault, Vincent

2013-01-01

Objective Since 1999, substantial efforts have been made by the international community to reduce the risks associated with unsafe injections, through ministries of health, international donors, the World Health Organization and the Safe Injection Global Network. The present study attempted to measure the progress, or lack thereof, made over the 2000–2010 decade in reducing unsafe injections in ten regions of the world corresponding to developing and transitional economies. Methods Data about the number of injections per person per year and the proportion of re-use of syringes and needles were obtained for 2010, mainly from population surveys, and compared with previous estimates for 2000 which had used various sources of information including injection safety assessments, population surveys and published studies on injection practices. Results From 2000 to 2010, in developing countries and transitional economies, the average number of injections per person per year decreased from 3.40 to 2.88, while the proportion of re-use of injection devices dropped from 39.8% to 5.5%. Combining both factors the number of unsafe injections per person per year decreased from 1.35 to 0.16. Even if substantial progress has been made, the Eastern Mediterranean region remains problematic, with 0.57 unsafe injections per person per year. In sub-Saharan Africa and Latin America, people now receive on average only 0.04–0.05 unsafe injections per year. Conclusion Substantial progress has been made in reducing the number of unsafe injections in developing countries and transitional economies, essentially through a reduction in the re-use of injection devices. In some regions, elimination of unsafe injections might become a reasonable goal. PMID:24324650

Ultrasound-guided intrasphincteric botulinum toxin injection relieves obstructive defecation due to Hirschsprung's disease and internal anal sphincter achalasia.

PubMed

Church, Joseph T; Gadepalli, Samir K; Talishinsky, Toghrul; Teitelbaum, Daniel H; Jarboe, Marcus D

2017-01-01

Chronic obstructive defecation can occur in patients with Hirschsprung Disease (HD) and internal anal sphincter (IAS) achalasia. Injection of Botulinum Toxin (BoTox) into the IAS can temporarily relieve obstructive defecation, but can be challenging when performed by tactile sense alone. We compared results of BoTox injections with and without ultrasound (US) guidance. We retrospectively reviewed BoTox injections into the IAS for obstructive defecation over 5years. Analyzed outcomes included short-term improvement, defined as resolution of enterocolitis, new ability to spontaneously defecate, and/or normalization of bowel movement frequency 2weeks post-operatively, as well as requirement of more definitive surgical therapy (myotomy/myomectomy, colectomy, colostomy, cecostomy/appendicostomy, and/or sacral nerve stimulator implantation). Outcomes were compared using t-test and Fisher's Exact test, with significance defined as p<0.05. Twelve patients who underwent BoTox injection were included, including 5 patients who underwent injections both with and without ultrasound. Ten underwent an ultrasound-guided injection (13 injection procedures), 5 of whom had HD. Seven underwent an injection without ultrasound guidance (17 injection procedures), 5 of whom had HD. Procedures performed with US resulted in greater short-term improvement (76% versus 65% without ultrasound) and less requirement of a definitive procedure for obstructive defecation (p<0.05). US-guided BoTox injection is safe and effective for obstructive defecation, and may decrease the need for a definitive operation. III. Copyright © 2017 Elsevier Inc. All rights reserved.

Botulinum neurotoxin type A in the masseter muscle: Effects on incisor eruption in rabbits

PubMed Central

Navarrete, Alfonso L.; Rafferty, Katherine L.; Liu, Zi Jun; Ye, Wenmin; Greenlee, Geoffrey M.; Herring, Susan W.

2015-01-01

Introduction Botulinum neurotoxins are responsible for the paralytic food poisoning, botulism. Commercial formulations such as botulinum neurotoxin type A are increasingly used for various conditions, including cosmetic recontouring of the lower face by injection of the large masseter muscles. The paralysis of a major muscle of mastication lowers occlusal force and thus might affect tooth eruption. The purpose of this study was to investigate the effects of unilateral masseter muscle injection of botulinum neurotoxin type A on the rate of eruption of incisors in a rabbit model. We hypothesized that the teeth would overerupt in an underloaded environment. Methods Forty rabbits were injected with either botulinum neurotoxin type A or saline solution in 1 masseter muscle. Mastication and muscle force production were monitored, and incisor eruption rate was assessed by caliper measurement of grooved teeth. Results The injection of saline solution had no effect. The masseter muscle injected with botulinum neurotoxin type A showed a dramatic loss of force 3 weeks after injection despite apparently normal mastication. Incisor eruption rate was significantly decreased for the botulinum neurotoxin type A group, an effect attributed to decreased attrition. Conclusions This study has implications for orthodontics. Although findings from ever-growing rabbit incisors cannot be extrapolated to human teeth, it is clear that botulinum neurotoxin type A caused a decrease in bite force that could influence dental eruption. PMID:23561411

Impact of Formaldehyde Addition on Auto-Ignition in Internal-Combustion Engines

NASA Astrophysics Data System (ADS)

Kuwahara, Kazunari; Ando, Hiromitsu; Furutani, Masahiro; Ohta, Yasuhiko

By employing a direct-injection diesel engine equipped with a common-rail type of injection system, by adding formaldehyde (CH2O) to the intake air, and by changing the fuel-injection timing, the compression ratio and the intake-air temperature, a mechanism for CH2O as a fuel additive to affect auto-ignition was discussed. Unlike an HCCI type of engine, the diesel engine can expose an air-fuel mixture only to a limited range of the in-cylinder temperature before the ignition, and can separate low- and high-temperature parts of the mechanism. When low-temperature oxidation starts at a temperature above 900K, there are cases that the CH2O advances the ignition timing. Below 900K, to the contrary, it always retards the timing. It is because, above 900K, a part of the CH2O changes into CO together with H2O2 as an ignition promoter. Below 900K, on the other hand, the CH2O itself acts as an OH radical scavenger against cool-flame reaction, from the beginning of low-temperature oxidation. Then, the engine was modified for its extraordinary function as a gasoline-knocking generator, in order that an effect of CH2O on knocking could be discussed. The CH2O retards the onset of auto-ignition of an end gas. Judging from a large degree of the retardation, the ignition is probably triggered below 900K.

Influence of injection of Chinese botulinum toxin type A on the histomorphology and myosin heavy chain composition of rat gastrocnemius muscles.

PubMed

Hong, Bin; Chen, Min; Hu, Xing-yue

2013-11-01

Botulinum toxin type A (BoNT/A) is a metalloprotease that blocks synaptic transmission via the cleavage of a synaptosomal-associated protein of 25 kDa (SNAP-25). It has gained widespread use as a treatment for cerebral palsy and skeletal muscle hypertrophy. In China, Chinese botulinum toxin type A (CBTX-A), a type of BoNT/A, is in widespread clinical use. However, the changes in the morphological and biochemical properties of treated muscles and in remote muscles from the CBTX-A injection site are relatively unknown. Therefore, we investigated the changes in histomorphology and myosin heavy chain (MyHC) isoform composition and distribution in rat gastrocnemius muscles after intramuscular injection of CBTX-A. The weakness of the injected muscles was assessed periodically to identify their functional deficiency. Muscle slices were stained with hematoxylin-eosin (HE) and adenosine triphosphatase (ATPase). MyHC isoform composition was analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) to uncover changes in morphological and biochemical properties. Our findings demonstrate that following injection of CBTX-A 5 U into rat gastrocnemius muscles, shifts in MyHC isoform composition emerged on the third day after injection and peaked in the fourth week. The composition remained distinctly different from that of the control group after the twelfth week. More specifically, there was a decrease in the proportion of the type IIb isoform and an increase in the proportions of type IIx, type IIa, and type I isoforms. Data revealed that CBTX-A led to a shift in MyHC composition towards slower isoforms and that the MyHC composition remained far from normal six months after a single injection. However, no noticeable remote muscle weakness was induced.

Installation, maintenance and operating manual for the Lucas-type fuel injection system of the 3 B rotary engine

NASA Technical Reports Server (NTRS)

1985-01-01

The installation procedure, maintenance, adjustment and operation of a Lucas type fuel injection system for 13B rotary racing engine is outlined. Components of the fuel injection system and installation procedure and notes are described. Maintenance, adjustment, and operation are discussed.

Experimental and Computational Investigation of Multiple Injection Ports in a Convergent-Divergent Nozzle for Fluidic Thrust Vectoring

NASA Technical Reports Server (NTRS)

Waithe, Kenrick A.; Deere, Karen A.

2003-01-01

A computational and experimental study was conducted to investigate the effects of multiple injection ports in a two-dimensional, convergent-divergent nozzle, for fluidic thrust vectoring. The concept of multiple injection ports was conceived to enhance the thrust vectoring capability of a convergent-divergent nozzle over that of a single injection port without increasing the secondary mass flow rate requirements. The experimental study was conducted at static conditions in the Jet Exit Test Facility of the 16-Foot Transonic Tunnel Complex at NASA Langley Research Center. Internal nozzle performance was obtained at nozzle pressure ratios up to 10 with secondary nozzle pressure ratios up to 1 for five configurations. The computational study was conducted using the Reynolds Averaged Navier-Stokes computational fluid dynamics code PAB3D with two-equation turbulence closure and linear Reynolds stress modeling. Internal nozzle performance was predicted for nozzle pressure ratios up to 10 with a secondary nozzle pressure ratio of 0.7 for two configurations. Results from the experimental study indicate a benefit to multiple injection ports in a convergent-divergent nozzle. In general, increasing the number of injection ports from one to two increased the pitch thrust vectoring capability without any thrust performance penalties at nozzle pressure ratios less than 4 with high secondary pressure ratios. Results from the computational study are in excellent agreement with experimental results and validates PAB3D as a tool for predicting internal nozzle performance of a two dimensional, convergent-divergent nozzle with multiple injection ports.

Oral administration of metal chelator ameliorates motor dysfunction after a small hemorrhage near the internal capsule in rat.

PubMed

Masuda, Tadashi; Hida, Hideki; Kanda, Yoshie; Aihara, Noritaka; Ohta, Kengo; Yamada, Kazuo; Nishino, Hitoo

2007-01-01

Cerebral hemorrhage leads to local production of free iron, radicals, cytokines, etc. To investigate whether a decrease of iron-mediated radical production influences functional recovery after intracerebral hemorrhage (ICH), a modified ICH rat model with a small hemorrhage near the internal capsule (IC) accompanied with relatively severe motor dysfunction was first developed. Then clioquinol (CQ), an iron chelator that reduces hydroxyl radical production, was orally administrated. Injection of different doses of Type IV collagenase (1.4 mul 1-200 U/ml) into the left striatum near the IC in Wistar rats showed that injection of 7.5 U/ml collagenase resulted in a small hemorrhoidal lesion near the IC with relatively severe motor dysfunction (IC model). Retrograde labeling of neurons in the sensory-motor cortex and axons in the corticospinal tract using Fluoro-gold (FG) injection into the spinal cord (C3-C4) showed that few labeled neurons in the sensory-motor cortex were detected in the IC model, FG-labeled axons disappeared, and FG-including ED-1-positive cells appeared within 24 hr in the IC. Assessments of behavior and histologic analysis after oral administration of CQ in the IC model indicated that oral administration of CQ prevented a decrease of FG-labeled neurons, and resulted in better motor-function recovery. CQ inhibited hydrogen peroxide-induced cell toxicity in oligodendrocytes in vitro, but not in neurons. Our data suggests that CQ ameliorated motor dysfunction after a small hemorrhage near the IC by a mechanism that is related to reduction of chain-reactive hydroxyl radical production in oligodendrocytes.

The influence of the perceived consequences of refusing to share injection equipment among injection drug users: Balancing competing risks

PubMed Central

Wagner, Karla D.; Lankenau, Stephen E.; Palinkas, Lawrence A.; Richardson, Jean L.; Chou, Chih-Ping; Unger, Jennifer B.

2011-01-01

Injection drug users (IDUs) are at risk for HIV and other bloodborne pathogens through receptive syringe sharing (RSS) and receptive paraphernalia sharing (RPS). Research into the influence of the perceived risk of HIV infection on injection risk behavior has yielded mixed findings. One explanation may be that consequences other than HIV infection are considered when IDUs are faced with decisions about whether or not to share equipment. We investigated the perceived consequences of refusing to share injection equipment among 187 IDUs recruited from a large syringe exchange program in Los Angeles, California, assessed their influence on RSS and RPS, and evaluated gender differences. Two sub-scales of perceived consequences were identified: structural/external consequences and social/internal consequences. In multiple linear regression, the perceived social/internal consequences of refusing to share were associated with both RSS and RPS, after controlling for other psychosocial constructs and demographic variables. Few statistically significant gender differences emerged. Assessing the consequences of refusing to share injection equipment may help explain persistent injection risk behavior, and may provide promising targets for comprehensive intervention efforts designed to address both individual and structural risk factors. PMID:21498004

Whitacre Needle Reduces the Incidence of Intravascular Uptake in Lumbar Transforaminal Epidural Steroid Injections.

PubMed

Hong, JiHee; Jung, Sungwon; Chang, Hyuckwon

2015-01-01

Transforaminal epidural steroid injection (TFESI) is a commonly used interventional pain management procedures to treat radicular leg pain. Although most reported complications of TFESI are minor, serious morbidity has also been demonstrated including spinal cord infarction, paraplegia, and quadriparesis. Suggested mechanisms include direct vascular injury or intravascular injection of particulate steroid. We compared 2 different needle types, Whitacre and Quincke type needles, with regard to intravascular injection rate with total procedure time and the amount of radiation during lumbar TFESI. Prospective, randomized trial. An interventional pain management practice in South Korea. After Institutional Review Board approval, 149 patients undergoing lumbar TFESI for radicular leg pain were randomly assigned to one of 2 needle groups (Whitacre needle or Quincke type needle). After final confirmation of intravascular injection with digital subtraction angiography, total procedure time and amount of radiation exposure during TFESI were measured. The overall incidence of intravascular injection was 10.4% (28/269). We analyzed the overall incidence of intravascular injection according to the 2 different needle types. The incidence of intravascular injection of the Whitacre needle was 5.4% (8/146), whereas the incidence of intravascular injection of the Quincke needle was 16.2% (20/123). Total procedure time and amount of radiation required to complete the TFESI in the Whitacre and Quincke needle groups was 168.4 ± 57.9 (seconds) and 33.4 ± 15.9 (cGy/cm2), 131.9 ± 46.0 (seconds) and 33.2 ± 15.8 (cGy/cm2), respectively. The physician who performed the TFESI was not blinded to the type of needle for detecting intravascular injection. This study was focused on lumbar TFESI, however, most TFESIs are performed at the L4-5 or L5-S1 level. The Whitacre needle had the benefit of reducing the incidence of intravascular injection with minimal differences in technical difficulties and the amount of radiation exposure during lumbar TFESI.

Active waste-injection systems in Florida, 1976

USGS Publications Warehouse

Vecchioli, John; McKenzie, D.J.; Pascale, C.A.; Wilson, W.E.

1979-01-01

As of the end of 1976, seven systems were injecting liquid wastes into Florida 's subsurface environment at a combined average rate of 15 million gallons per day. This report presents for each of these systems information on the kind and amount of waste injected and type of pretreatment, construction characteristics of the injection and monitor wells, type of test and monitoring data available, and brief discussion of any operational problems experienced. (Kosco-USGS)

The Australasian Diabetes Data Network: first national audit of children and adolescents with type 1 diabetes.

PubMed

Phelan, Helen; Clapin, Helen; Bruns, Loren; Cameron, Fergus J; Cotterill, Andrew M; Couper, Jennifer J; Davis, Elizabeth A; Donaghue, Kim C; Jefferies, Craig A; King, Bruce R; Sinnott, Richard O; Tham, Elaine B; Wales, Jerry K; Jones, Timothy W; Craig, Maria E

2017-02-20

To assess glycaemic control, anthropometry and insulin regimens in a national sample of Australian children and adolescents with type 1 diabetes. Cross-sectional analysis of de-identified, prospectively collected data from the Australasian Diabetes Data Network (ADDN) registry. Five paediatric diabetes centres in New South Wales, Queensland, South Australia, Victoria and Western Australia. Children and adolescents (aged 18 years or under) with type 1 diabetes of at least 12 months' duration for whom data were added to the ADDN registry during 2015. Glycaemic control was assessed by measuring haemoglobin A1c (HbA1c) levels. Body mass index standard deviation scores (BMI-SDS) were calculated according to the CDC-2000 reference; overweight and obesity were defined by International Obesity Task Force guidelines. Insulin regimens were classified as twice-daily injections (BD), multiple daily injections (MDI; at least three injection times per day), or continuous subcutaneous insulin infusion (CSII). The mean age of the 3279 participants was 12.8 years (SD, 3.7), mean diabetes duration was 5.7 years (SD, 3.7), and mean HbA1c level 67 mmol/mol (SD, 15); only 27% achieved the national HbA1c target of less than 58 mmol/mol. The mean HbA1c level was lower in children under 6 (63 mmol/mol) than in adolescents (14-18 years; 69 mmol/mol). Mean BMI-SDS for all participants was 0.6 (SD, 0.9); 33% of the participants were overweight or obese. 44% were treated with CSII, 38% with MDI, 18% with BD. Most Australian children and adolescents with type 1 diabetes are not meeting the recognised HbA1c target. The prevalence of overweight and obesity is high. There is an urgent need to identify barriers to achieving optimal glycaemic control in this population.

Dependencies of surface plasmon coupling effects on the p-GaN thickness of a thin-p-type light-emitting diode.

PubMed

Su, Chia-Ying; Lin, Chun-Han; Yao, Yu-Feng; Liu, Wei-Heng; Su, Ming-Yen; Chiang, Hsin-Chun; Tsai, Meng-Che; Tu, Charng-Gan; Chen, Hao-Tsung; Kiang, Yean-Woei; Yang, C C

2017-09-04

The high performance of a light-emitting diode (LED) with the total p-type thickness as small as 38 nm is demonstrated. By increasing the Mg doping concentration in the p-AlGaN electron blocking layer through an Mg pre-flow process, the hole injection efficiency can be significantly enhanced. Based on this technique, the high LED performance can be maintained when the p-type layer thickness is significantly reduced. Then, the surface plasmon coupling effects, including the enhancement of internal quantum efficiency, increase in output intensity, reduction of efficiency droop, and increase of modulation bandwidth, among the thin p-type LED samples of different p-type thicknesses that are compared. These advantageous effects are stronger as the p-type layer becomes thinner. However, the dependencies of these effects on p-type layer thickness are different. With a circular mesa size of 10 μm in radius, through surface plasmon coupling, we achieve the record-high modulation bandwidth of 625.6 MHz among c-plane GaN-based LEDs.

Real-time visualization of macromolecule uptake by epidermal Langerhans cells in living animals.

PubMed

Frugé, Rachel E; Krout, Colleen; Lu, Ran; Matsushima, Hironori; Takashima, Akira

2012-03-01

As a skin-resident member of the dendritic cell family, Langerhans cells (LCs) are generally regarded to function as professional antigen-presenting cells. Here we report a simple method to visualize the endocytotic activity of LCs in living animals. BALB/c mice received subcutaneous injection of FITC-conjugated dextran (DX) probes into the ear skin and were then examined under confocal microscopy. Large numbers of FITC(+) epidermal cells became detectable 12-24 hours after injection as background fluorescence signals began to disappear. Most (>90%) of the FITC(+) epidermal cells expressed Langerin, and >95% of Langerin(+) epidermal cells exhibited significant FITC signals. To assess intracellular localization, Alexa Fluor 546-conjugated DX probes were locally injected into IAβ-enhanced green fluorescent protein (EGFP) knock-in mice and Langerin-EGFP-diphtheria toxin receptor mice--three dimensional rotation images showed close association of most of the internalized DX probes with major histocompatibility complex (MHC) class II molecules, but not with Langerin molecules. These observations support the current view that LCs constantly sample surrounding materials, including harmful and innocuous antigens, at the environmental interface. Our data also validate the potential utility of the newly developed imaging approach to monitor LC function in wild-type animals.

[Study of the intracerebral connections after intracortical administration of glutamate].

PubMed

Otellin, V A; Rybakov, V L; Grigor'ev, I P

1980-10-01

Various microdoses of monosubstituted sodium L-glutamate (MSG) were injected into zone AI of the cat cerebral acoustic cortex. In 2 h--14 days, it was stated light optically that the place of injection was slightly stained, and most of neurons failed to stain. At the place of MSG injection, electron microscopic investigation revealed neurons with various degree of pathologic changes up to the lethal ones. Astroglia was edematous, oligodendrocytes and pericytes had normal appearance. In field 4 and in zone AII of the acoustic cortex, separate neural cells with sharply increasing number of ribosomes and polysomes were noted. Anterograde axonal degeneration in the lesioned neurons and their terminals was revealed in frontal sections impregnated after Wiitanen. In the cortical field 7, in zones AII, AIV, Ep of the acoustic cortex, in the head of the nucleus caudatus and in the internal geniculate body, terminal boutons degenerating after the dark type and at the same time as after surgical extirpation of zone AI were revealed. Owing to the fact that the lesions are of local character and the trauma is small, it is possible to use neuronal glutamate-induced degeneration as a method for investigating intracerebral connections.

Adaptive engine injection for emissions reduction

DOEpatents

Reitz, Rolf D. : Sun, Yong

2008-12-16

NOx and soot emissions from internal combustion engines, and in particular compression ignition (diesel) engines, are reduced by varying fuel injection timing, fuel injection pressure, and injected fuel volume between low and greater engine loads. At low loads, fuel is injected during one or more low-pressure injections occurring at low injection pressures between the start of the intake stroke and approximately 40 degrees before top dead center during the compression stroke. At higher loads, similar injections are used early in each combustion cycle, in addition to later injections which preferably occur between about 90 degrees before top dead center during the compression stroke, and about 90 degrees after top dead center during the expansion stroke (and which most preferably begin at or closely adjacent the end of the compression stroke). These later injections have higher injection pressure, and also lower injected fuel volume, than the earlier injections.

Laser/Light Therapy for Birthmarks

MedlinePlus

... Back Injectable Deoxycholic Acid Injectable Hyaluronic Acid Injectable Poly-l-lactic Acid Injectable Polymethylmethacrylate + Bovine Collagen Filler ... birthmark type, until the patient's goal is achieved. Pain and recovery time is minimal. Procedure is non- ...

PLGA-Based Nanoparticles: a Safe and Suitable Delivery Platform for Osteoarticular Pathologies.

PubMed

Riffault, Mathieu; Six, Jean-Luc; Netter, Patrick; Gillet, Pierre; Grossin, Laurent

2015-12-01

Despite the promising applications of PLGA based particles, studies examining the fate and consequences of these particles after intra-articular administration in the joint are scanty. This study was carried out to evaluate the neutrality of the unloaded delivery system on different articular cell types. To facilitate tracking, we have thus developed a fluorescent core of particles, combined to a hyaluronate shell for cell recognition. Fluorescence pictures were taken at time intervals to assess the internalization and the corresponding inflammatory response was monitored by RT-qPCR and biochemical measurements. After NPs pre-treatment, mesenchymal stem cells (MSCs) were cultured into chondrogenic, adipogenic or osteogenic differentiation media, to investigate if NPs exposure interferes with differentiation ability. Finally, intra-articular injections were performed in healthy rat knees and joint's structure analysed by histological studies. Particles were detected in cytoplasm 8 h after exposure. Internalization led to a slight and reversible increase of inflammatory markers, but lower than in inflammatory conditions. We have confirmed particles exposure minimal neutrality on MSCs pluripotency. Histological exams of joint after intra-articular injections do not demonstrate any side effects of NPs. Our findings suggest that such a delivery platform is well tolerated locally and could be used to deliver active molecules to the joint.

Experimental Verification of Integrity of Low-Pressure Injection Piles Structure - Pile Internal Capacity

NASA Astrophysics Data System (ADS)

Pachla, Henryk

2017-12-01

The idea of strengthening the foundation using injection piles lies in transferring loads from the foundation to the piles anchorage in existing structure and formed in the soil. Such a system has to be able to transfer loads from the foundation to the pile and from the pile onto the soil. Pile structure often reinforced with steel element has to also be able to transfer such a loading. According to the rules of continuum mechanics, the bearing capacity of such a system and a deformation of its individual elements can be determined by way of an analysis of the contact problem of three interfaces. Each of these surfaces is determined by different couples of materials. Those surfaces create: pile-foundation anchorage, bonding between reinforcement and material from which the pile is formed and pilesoil interface. What is essential is that on the contact surfaces the deformation of materials which adhere to each other can vary and depends on the mechanical properties and geometry of these surfaces. Engineering practice and experimental research point out that the failure in such structures occurs at interfaces. The paper is concentrating on presenting the experiments on interaction between cement grout and various types of steel reinforcement. The tests were conducted on the special low pressure injection piles widely used to strengthen foundations of already existing structures of historical buildings due to the technology of formation and injection pressure.

Thrombin Injection Failure with Subsequent Successful Stent-Graft Placement for the Treatment of an Extracranial Internal Carotid Pseudoaneurysm in a 5-Year-Old Child

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garcia-Monaco, R. D.; Kohan, A. A., E-mail: andreskohan1@gmail.com; Martinez-Corvalan, M. P.

Internal carotid artery pseudoaneurysm is a rare life-threatening condition that may develop in different clinical situations. We report the case of an extracranial internal carotid artery pseudoaneurysm secondary to a throat infection in a pediatric patient that was initially treated with percutaneous thrombin injection under ultrasound guidance. However, recanalization occurred at 48 h, and definitive treatment was then performed by endovascular stent-graft placement. We briefly review the clinical characteristics of this uncommon clinical condition as well as the treatment options.

Carmustine

MedlinePlus

... injection is used to treat certain types of brain tumors. Carmustine injection is also used along with prednisone to treat multiple myeloma (a type of cancer of the bone marrow). It is also used ...

Injecting buprenorphine-naloxone film: Findings from an explorative qualitative study.

PubMed

White, Nancy; Flaherty, Ian; Higgs, Peter; Larance, Briony; Nielsen, Suzanne; Degenhardt, Louisa; Ali, Robert; Lintzeris, Nicholas

2015-11-01

Experiences of buprenorphine-naloxone (BNX) sublingual film injection are not well documented or understood. We examined how people who inject BNX film seek and share information about this practice, document the methods used to prepare BNX film for injection, and report participants' experiences of this practice. Interviews were (n = 16) conducted with people who indicated that they had injected BNX film since its introduction onto the Australian market. Semistructured interviews were recorded and transcribed. NVivo10 program (QSR International) was used to analyse the data using qualitative description methodology. Participants largely reported similar BNX film preparation techniques, although the texture of BNX film during preparation to inject was reported to be unusual (gluggy), and there were many varied accounts associated with the amount of water used. Physical harms reported as associated with injecting BNX film were described (including local and systemic issues); participants reported injecting the film to enhance its immediate effects, yet generally reported that sublingual administration provided longer-lasting effects. Understanding knowledge acquisition about injecting new formulations of opioid substitution therapy is crucial in developing more effective harm-reduction strategies. Dissemination by peer networks to those who are currently or planning to inject BNX film regarding the 'gelatine like' texture when mixing, using only cold water and double filtering is important to ensure safer injecting practices. Findings from this study highlight the importance of peer networks for the dissemination of harm-reduction information. Introduction of new formulations internationally requires more qualitative studies to inform safer practices. © 2015 Australasian Professional Society on Alcohol and other Drugs.

Design of Training Systems. Computerization of the Educational Technology Assessment Model (ETAM). Volume 2

DTIC Science & Technology

1977-05-01

444 EN 2 31043 TEST UNIT INJECTORS AND/OR FUEL INJECTION NOZZLES 445 EN 2 31044 MAINTENANCE OF FUEL OIL INJECTORS 446 EN 2 31049 PREVENTION OF...OPERATIONAL MAINTENANCE OF DIESEL ENGINES OPERATE INTERNAL COMBUSTION ENGINES JACKING GEAR ON INTERNAL COMBUSTION ENGINES CARRYOUT TURNING OVER OF MAIN...ENGINES ALIGN LUBRICATING OIL SYSTEM USE OF STANDBY LUBRICATING OIL PUMPS PURGE DIESEL ENGINE FUEL INJECTION SYSTEM ENTRIES TO MAIN PROPULSION

Insulin degludec/insulin aspart combination for the treatment of type 1 and type 2 diabetes

PubMed Central

Dardano, Angela; Bianchi, Cristina; Del Prato, Stefano; Miccoli, Roberto

2014-01-01

Glycemic control remains the major therapeutic objective to prevent or delay the onset and progression of complications related to diabetes mellitus. Insulin therapy represents a cornerstone in the treatment of diabetes and has been used widely for achieving glycemic goals. Nevertheless, a large portion of the population with diabetes does not meet the internationally agreed glycemic targets. Moreover, insulin treatment, especially if intensive, may be associated with emergency room visits and hospitalization due to hypoglycemic events. Therefore, fear of hypoglycemia or hypoglycemic events represents the main barriers to the attainment of glycemic targets. The burden associated with multiple daily injections also remains a significant obstacle to initiating and maintaining insulin therapy. The most attractive insulin treatment approach should meet the patients’ preference, rather than demanding patients to change or adapt their lifestyle. Insulin degludec/insulin aspart (IDegAsp) is a new combination, formulated with ultra-long-acting insulin degludec and rapid-acting insulin aspart, with peculiar pharmacological features, clinical efficacy, safety, and tolerability. IDegAsp provides similar, noninferior glycemic control to a standard basal–bolus regimen in patients with type 1 diabetes mellitus, with additional benefits of significantly lower episodes of hypoglycemia (particularly nocturnal) and fewer daily insulin injections. Moreover, although treatment strategy and patients’ viewpoint are different in type 1 and type 2 diabetes, trial results suggest that IDegAsp may be an appropriate and reasonable option for initiating insulin therapy in patients with type 2 diabetes inadequately controlled on maximal doses of conventional oral agents. This paper will discuss the role of IDegAsp combination as a novel treatment option in diabetic patients. PMID:25143741

Numerical Simulations of a 96-rod Polysilicon CVD Reactor

NASA Astrophysics Data System (ADS)

Guoqiang, Tang; Cong, Chen; Yifang, Cai; Bing, Zong; Yanguo, Cai; Tihu, Wang

2018-05-01

With the rapid development of the photovoltaic industry, pressurized Siemens belljar-type polysilicon CVD reactors have been enlarged from 24 rods to 96 rods in less than 10 years aimed at much greater single-reactor productivity. A CFD model of an industry-scale 96-rod CVD reactor was established to study the internal temperature distribution and the flow field of the reactor. Numerical simulations were carried out and compared with actual growth results from a real CVD reactor. Factors affecting polysilicon depositions such as inlet gas injections, flow field, and temperature distribution in the CVD reactor are studied.

Do patients with structural abnormalities of the shoulder experience pain after MR arthrography of the shoulder?

PubMed

Steurer-Dober, Isabelle; Rufibach, Kaspar; Hodler, Juerg; Saupe, Nadja; Zanetti, Marco; Fucentese, Sandro F; Pfirrmann, Christian W A

2010-09-01

To assess the pain course after intraarticular injection of a gadolinium-containing contrast material admixed with anesthetic for magnetic resonance (MR) arthrography of the shoulder in relation to internal derangements of the shoulder. Institutional review board approval and informed consent were obtained for this study. The study sample consisted of 655 consecutive patients (249 female, 406 male; median age, 54 years) referred for MR arthrography of the shoulder. Pain level was measured at baseline, directly after intraarticular injection of the gadolinium-containing contrast material admixed with anesthetic, 4 hours after injection, 1 day (18-30 hours) after injection, and 1 week (6-8 days) after injection with a visual analog scale (range, 0-10). MR arthrography was used to assess the following internal derangements: lesions of the rotator cuff tendons and long biceps tendon, adhesive capsulitis (frozen shoulder), fluid in the subacromial bursa, labral tears, and osteoarthritis of the glenohumeral joint. History of shoulder surgery was recorded. Linear regression models were calculated for the dependent variable (difference between follow-up pain and baseline pain), with the independent variable grouping adjusted for age and sex. There was no significant association between pain level over time and internal derangements of the shoulder, nor was there significant association between pain level over time in patients with a history of shoulder surgery and patients without a history of shoulder surgery. Neither internal derangements nor prior surgery have an apparent effect on the pain course after MR arthrography of the shoulder. (c) RSNA, 2010.

Effect of Fuel Properties on Injection Characteristics of Four Different Diesel Injection Systems.

DTIC Science & Technology

1985-12-01

Effects on Combustion in Direct Injection Diesel Engines," SAE Technical Paper Series, No. 850108, International Congress and Exposi - tion, Detroit, MI...NIEMEYER) I AMXSY-CR 1 DEFENSE STANDARDIZATION OFFICE ABE SYNR R ATTN DR MILER 1 ABERDEEN PROVING GROUND MDATTN: DR S ILLE I 10-06 . 2 1005-5006 5203

Development of glia and blood vessels in the internal capsule of rats.

PubMed

Earle, K L; Mitrofanis, J

1998-02-01

We have explored two aspects of internal capsule development that have not been described previously, namely, the development of glia and of blood vessels. To these ends, we used antibodies to glial fibrillary acidic protein (GFAP) and to vimentin (to identify astrocytes and to radial glia) and Griffonia simplicifolia (lectin; to identify microglia and blood vessels). Further, we made intracardiac injections of Evans Blue to examine the permeability of this dye in the vessels of the internal capsule during neonatal development. Our results show that large numbers of radial glia, astrocytes and microglia are not labelled with these markers in the white matter of the internal capsule until about birth; very few are labelled earlier, during the critical stages of corticofugal and corticopetal axonal ingrowth (E15-E20). The large glial labelling in the internal capsule at birth is accompanied by a dense vascular innervation of the capsule; as with the glia, very few labelled patent vessels are seen earlier. After intracardiac injections of Evans Blue, we find that the blood vessels of the internal capsule are not particularly permeable to Evans Blue. At each age examined (P0, P5, P15), blood vessels are outlined very clearly and there is no diffuse haze of fluorescence within the extracellular space, which is indicative of a leaky vessel. There are three striking differences between the glial environment of the internal capsule and that of the adjacent thalamus. First, the internal capsule is never rich with radial glial fibres (vimentin- and GFAP-immunoreactive) during development (except at P0), whereas the thalamus has many radial fibres from very early development (E15-E17). Second, astrocytes (vimentin- and GFAP-immunoreactive) first become apparent in the internal capsule (E20-P0) well before they do in the thalamus (P15). Third, the internal capsule houses a large transient population of amoeboid microglia (P0-P22), whereas the thalamus does not; only ramified microglia are seen in the thalamus. In summary, our results indicate that all three types of glia in the internal capsule are associated closely with the vasculature, suggesting they may play a role in the development of the blood-brain barrier among the vessels in this white matter region of the forebrain.

Intrathecal P/Q- and R-type calcium channel blockades on spinal substance P release and c-Fos expression

PubMed Central

Terashima, Tetsuji; Xu, Qinghao; Yamaguchi, Shigeki; Yaksh, Tony L.

2013-01-01

Intrathecal (IT) studies have shown that several voltage sensitive calcium channels (VSCCs), such as the L-, N- and T-type may play roles in nociception and that of these only the N-type regulates primary afferent substance P (SP) release. However, the actions of other VSCCs at the spinal level are not well known. We investigated the roles of spinal P/Q- and R-type VSCCs, by IT administration of R-type (SNX-482) and P/Q-type (ω-agatoxin IVA) VSCC blockers on intraplantar formalin-evoked flinching, SP release from primary afferents and c-Fos expression in spinal dorsal horn. Intraplantar injection of formalin (2.5%, 50 µL) produced an intense, characteristic biphasic paw flinching response. In rats with IT catheters, IT SNX-482 (0.5 µg) reduced formalin-evoked paw flinching in both phase 1 and 2 compared with vehicle. Intraplantar formalin caused robust neurokinin 1 receptor (NK1r) internalization (indicating SP release) and c-Fos expression in the ipsilateral dorsal horn, which were blocked by IT SNX-482. IT ω-agatoxin IVA (0.03, 0.125 and 0.5 µg) did not reduce formalin-evoked paw flinching or c-Fos expression at any doses, with higher doses resulting in motor dysfunction. Thus, we demonstrated that blockade of spinal R-type, but not P/Q type VSCCs attenuated formalin-induced pain behavior, NK1r internalization and c-Fos expression in the superficial dorsal horn. This study supports a role for Cav2.3 in presynaptic neurotransmitter release from peptidergic nociceptive afferents and pain behaviors. PMID:23810829

Dexamethasone Injection

MedlinePlus

... severe allergic reactions. It is used in the management of certain types of edema (fluid retention and ... needed for normal body functioning) and in the management of certain types of shock. Dexamethasone injection is ...

Revisiting ocean carbon sequestration by direct injection: a global carbon budget perspective

NASA Astrophysics Data System (ADS)

Reith, Fabian; Keller, David P.; Oschlies, Andreas

2016-11-01

In this study we look beyond the previously studied effects of oceanic CO2 injections on atmospheric and oceanic reservoirs and also account for carbon cycle and climate feedbacks between the atmosphere and the terrestrial biosphere. Considering these additional feedbacks is important since backfluxes from the terrestrial biosphere to the atmosphere in response to reducing atmospheric CO2 can further offset the targeted reduction. To quantify these dynamics we use an Earth system model of intermediate complexity to simulate direct injection of CO2 into the deep ocean as a means of emissions mitigation during a high CO2 emission scenario. In three sets of experiments with different injection depths, we simulate a 100-year injection period of a total of 70 GtC and follow global carbon cycle dynamics over another 900 years. In additional parameter perturbation runs, we varied the default terrestrial photosynthesis CO2 fertilization parameterization by ±50 % in order to test the sensitivity of this uncertain carbon cycle feedback to the targeted atmospheric carbon reduction through direct CO2 injections. Simulated seawater chemistry changes and marine carbon storage effectiveness are similar to previous studies. As expected, by the end of the injection period avoided emissions fall short of the targeted 70 GtC by 16-30 % as a result of carbon cycle feedbacks and backfluxes in both land and ocean reservoirs. The target emissions reduction in the parameter perturbation simulations is about 0.2 and 2 % more at the end of the injection period and about 9 % less to 1 % more at the end of the simulations when compared to the unperturbed injection runs. An unexpected feature is the effect of the model's internal variability of deep-water formation in the Southern Ocean, which, in some model runs, causes additional oceanic carbon uptake after injection termination relative to a control run without injection and therefore with slightly different atmospheric CO2 and climate. These results of a model that has very low internal climate variability illustrate that the attribution of carbon fluxes and accounting for injected CO2 may be very challenging in the real climate system with its much larger internal variability.

Design and Analysis of a Continuous Split Typed Needle-Free Injection System for Animal Vaccination.

PubMed

Chen, Kai; Pan, Min; Liu, Tingting

2017-01-01

Liquid needle-free injection devices (NFIDs) employ a high-velocity liquid jet to deliver drugs and vaccine through transdermal injection. NFIDs for animal vaccination are more complicated than those used for human beings for their much larger and more flexible power sources, as well as rapid, repetitive and continuous injection features. In the paper, spring-powered NFID is designed for animal vaccine injection. For convenience, the device is a split into a power source and handheld injector. A mathematical model is proposed to calculate the injection pressure, taking into the account pressure loss and the strain energy loss in the bendable tube due to elastic deformation. An experimental apparatus was build to verify the calculation results. Under the same system conditions, the calculation results of the dynamic injection pressure match the experimental results. It is found that the bendable tube of the split typed NFID has significant impact on the profile of the injection pressure. The initial peak pressure is less than the initial peak pressure of NFID without bendable tube, and there is occurrence time lag of the peak pressure. The mathematical model is the first attempt to reveal the relationship between the injection pressure and the system variables of split typed NFID.

Immediate flow reserve of Y thoracic artery grafts: an intraoperative flowmetric study.

PubMed

Gaudino, Mario; Di Mauro, Michele; Iacò, Angela Lorena; Canosa, Carlo; Vitolla, Giuseppe; Calafiore, Antonio Maria

2003-10-01

Use of both internal thoracic arteries in a Y graft configuration can raise concerns about the possibility of the single left internal thoracic artery being able to meet the flow requirements of two or three distal territories. We evaluated intraoperatively the flow reserve of a Y thoracic artery graft distally anastomosed to the anterior and lateral territories. In 21 patients who had Y thoracic artery grafts, the flow was measured in the main stem of the left internal thoracic artery, in the left internal thoracic artery branch, and in the right internal thoracic artery. A transit time Doppler flowmeter was used. Measurements were repeated after the injection of a bolus of 20 mug/kg dobutamine. At baseline condition, the mean blood flow was 44.8 +/- 24.2, 23.4 +/- 11.5, and 21.4 +/- 15.3 mL/min in the main stem of the left internal thoracic artery, in the left internal thoracic artery branch, and in the right internal thoracic artery, respectively. After dobutamine injection, these values increased to 93.2 +/- 49.8, 46.1 +/- 22.6, and 42.5 +/- 31.2 mL/min, respectively. Flow reserve was 2.1 +/- 0.6, 2.2 +/- 0.9, and 2.1 +/- 0.9 mL/min, respectively. Intraoperative injection of dobutamine increases the flow in the Y thoracic graft by more than two times, not only in the main stem but also in each branch. This finding attests to the safety of Y thoracic conduits in terms of hemodynamic potential.

Safety of Ultrasound-Guided Botulinum Toxin Injections for Sialorrhea as Performed by Pediatric Otolaryngologists.

PubMed

Shariat-Madar, Bahbak; Chun, Robert H; Sulman, Cecille G; Conley, Stephen F

2016-05-01

To evaluate incidence of complications and hospital readmission as a result of ultrasound-guided botulinum toxin injections to manage sialorrhea. Case series with chart review. Children's Hospital of Wisconsin. A case series with chart review was performed of all cases of ultrasound-guided injection of botulinum toxin by pediatric otolaryngologists from March 5, 2010, to September 26, 2014,. Primary outcomes included complications such as dysphagia, aspiration pneumonia, and motor paralysis. Secondary outcomes included hospitalization, intubation, and nasogastric tube placement. There were 48 patients, 111 interventions, and 306 intraglandular injections identified. Botulinum toxin type A and type B were utilized in 4 and 107 operative interventions, respectively. Type A was injected into 4 parotid and 4 submandibular glands, utilizing doses of 20 U per parotid and 30 U per submandibular gland. Type B was injected into 98 parotid and 200 submandibular glands, with average dosing of 923 U per parotid and 1170 U per submandibular gland, respectively. There were 2 instances of subjectively worsening of baseline dysphagia that self-resolved. No cases were complicated by aspiration pneumonia or motor paralysis. No patients required hospital readmission, intubation, or nasogastric tube placement. Prior published data indicated 16% complication incidence with ultrasound-guided injection of botulinum toxin. Our study found a low complication rate (0.6%) with ultrasound-guided injections of botulinum toxin to manage sialorrhea, without cases of aspiration pneumonia or motor paralysis. Of 306 intraglandular injections, there were 2 cases of worsening baseline subjective dysphagia that self-resolved. © American Academy of Otolaryngology—Head and Neck Surgery Foundation 2016.

Transretroperitoneal CT-guided Embolization of Growing Internal Iliac Artery Aneurysm after Repair of Abdominal Aortic Aneurysm: A Transretroperitoneal Approach with Intramuscular Lidocaine Injection Technique

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, Joon Young, E-mail: pjy1331@hanmail.net; Kim, Shin Jung, E-mail: witdd2@hanmail.net; Kim, Hyoung Ook, E-mail: chaos821209@hanmail.net

This study was designed to evaluate the efficacy and safety of CT-guided embolization of internal iliac artery aneurysm (IIAA) after repair of abdominal aortic aneurysm by transretroperitoneal approach using the lidocaine injection technique to iliacus muscle, making window for safe needle path for three patients for whom CT-guided embolization of IIAA was performed by transretroperitoneal approach with intramuscular lidocaine injection technique. Transretroperitoneal access to the IIAA was successful in all three patients. In all three patients, the IIAA was first embolized using microcoils. The aneurysmal sac was then embolized with glue and coils without complication. With a mean follow-up ofmore » 7 months, the volume of the IIAAs remained stable without residual endoleaks. Transretroperitoneal CT-guided embolization of IIAA using intramuscular lidocaine injection technique is effective, safe, and results in good outcome.« less

Strategies for safe injections.

PubMed Central

Battersby, A.; Feilden, R.; Stoeckel, P.; Da Silva, A.; Nelson, C.; Bass, A.

1999-01-01

In 1998, faced with growing international concern, WHO set out an approach for achieving injection safety that encompassed all elements from patients' expectations and doctors' prescribing habits to waste disposal. This article follows that lead and describes the implications of the approach for two injection technologies: sterilizable and disposable. It argues that focusing on any single technology diverts attention from the more fundamental need for health services to develop their own comprehensive strategies for safe injections. National health authorities will only be able to ensure that injections are administered safely if they take an approach that encompasses the whole system, and choose injection technologies that fit their circumstances. PMID:10680247

Effect of injection rate on contrast-enhanced MR angiography image quality: Modulation transfer function analysis.

PubMed

Clark, Toshimasa J; Wilson, Gregory J; Maki, Jeffrey H

2017-07-01

Contrast-enhanced (CE)-MRA optimization involves interactions of sequence duration, bolus timing, contrast recirculation, and both R 1 relaxivity and R2*-related reduction of signal. Prior data suggest superior image quality with slower gadolinium injection rates than typically used. A computer-based model of CE-MRA was developed, with contrast injection, physiologic, and image acquisition parameters varied over a wide gamut. Gadolinium concentration was derived using Verhoeven's model with recirculation, R 1 and R2* calculated at each time point, and modulation transfer curves used to determine injection rates, resulting in optimal resolution and image contrast for renal and carotid artery CE-MRA. Validation was via a vessel stenosis phantom and example patients who underwent carotid CE-MRA with low effective injection rates. Optimal resolution for renal and carotid CE-MRA is achieved with injection rates between 0.5 to 0.9 mL/s and 0.2 to 0.3 mL/s, respectively, dependent on contrast volume. Optimal image contrast requires slightly faster injection rates. Expected signal-to-noise ratio varies with both contrast volume and cardiac output. Simulated vessel phantom and clinical carotid CE-MRA exams at an effective contrast injection rate of 0.4 to 0.5 mL/s demonstrate increased resolution. Optimal image resolution is achieved at intuitively low, effective injection rates (0.2-0.9 mL/s, dependent on imaging parameters and contrast injection volume). Magn Reson Med 78:357-369, 2017. © 2016 International Society for Magnetic Resonance in Medicine. © 2016 International Society for Magnetic Resonance in Medicine.

The convergence of medicine and neurotoxins: a focus on botulinum toxin type A and its application in aesthetic medicine--a global, evidence-based botulinum toxin consensus education initiative: part II: incorporating botulinum toxin into aesthetic clinical practice.

PubMed

Carruthers, Jean; Fournier, Nathalie; Kerscher, Martina; Ruiz-Avila, Javier; Trindade de Almeida, Ada R; Kaeuper, Gina

2013-03-01

The new world of safe aesthetic injectables has become increasingly popular with patients. Not only is there less risk than with surgery, but there is also significantly less downtime to interfere with patients' normal work and social schedules. Botulinum toxin (BoNT) type A (BoNTA) is an indispensable tool used in aesthetic medicine, and its broad appeal has made it a hallmark of modern culture. The key to using BoNTA to its best effect is to understand patient-specific factors that will determine the treatment plan and the physician's ability to personalize injection strategies. To present international expert viewpoints and consensus on some of the contemporary best practices in aesthetic BoNTA, so that beginner and advanced injectors may find pearls that provide practical benefits. Expert aesthetic physicians convened to discuss their approaches to treatment with BoNT. The discussions and consensus from this meeting were used to provide an up-to-date review of treatment strategies to improve patient results. Information is presented on patient management and assessment, documentation and consent, aesthetic scales, injection strategies, dilution, dosing, and adverse events. A range of product- and patient-specific factors influence the treatment plan. Truly optimized outcomes are possible only when the treating physician has the requisite knowledge, experience, and vision to use BoNTA as part of a unique solution for each patient's specific needs. © 2013 by the American Society for Dermatologic Surgery, Inc. Published by Wiley Periodicals, Inc.

Lacosamide Injection

MedlinePlus

Lacosamide injection is used in combination with other medications to control certain types of seizures in people who cannot take oral medications. Lacosamide injection is in a class of medications called ...

DETECTING WATER FLOW BEHIND PIPE IN INJECTION WELLS

EPA Science Inventory

Regulations of the Environmental Protection Agency require that an injection well exhibit both internal and external mechanical integrity. The external mechanical integrity consideration is that there is no significant fluid movement into an underground source of drinking water ...

Relative effectiveness of insulin pump treatment over multiple daily injections and structured education during flexible intensive insulin treatment for type 1 diabetes: cluster randomised trial (REPOSE).

PubMed

2017-03-30

Objective  To compare the effectiveness of insulin pumps with multiple daily injections for adults with type 1 diabetes, with both groups receiving equivalent training in flexible insulin treatment. Design  Pragmatic, multicentre, open label, parallel group, cluster randomised controlled trial (Relative Effectiveness of Pumps Over MDI and Structured Education (REPOSE) trial). Setting  Eight secondary care centres in England and Scotland. Participants  Adults with type 1 diabetes who were willing to undertake intensive insulin treatment, with no preference for pumps or multiple daily injections. Participants were allocated a place on established group training courses that taught flexible intensive insulin treatment ("dose adjustment for normal eating," DAFNE). The course groups (the clusters) were then randomly allocated in pairs to either pump or multiple daily injections. Interventions  Participants attended training in flexible insulin treatment (using insulin analogues) structured around the use of pump or injections, followed for two years. Main outcome measures  The primary outcomes were a change in glycated haemoglobin (HbA1c) values (%) at two years in participants with baseline HbA1c value of ≥7.5% (58 mmol/mol), and the proportion of participants achieving an HbA1c value of <7.5%. Secondary outcomes included body weight, insulin dose, and episodes of moderate and severe hypoglycaemia. Ancillary outcomes included quality of life and treatment satisfaction. Results  317 participants (46 courses) were randomised (156 pump and 161 injections). 267 attended courses and 260 were included in the intention to treat analysis, of which 235 (119 pump and 116 injection) had baseline HbA1c values of ≥7.5%. Glycaemic control and rates of severe hypoglycaemia improved in both groups. The mean change in HbA1c at two years was -0.85% with pump treatment and -0.42% with multiple daily injections. Adjusting for course, centre, age, sex, and accounting for missing values, the difference was -0.24% (-2.7 mmol/mol) in favour of pump users (95% confidence interval -0.53 to 0.05, P=0.10). Most psychosocial measures showed no difference, but pump users showed greater improvement in treatment satisfaction and some quality of life domains (dietary freedom and daily hassle) at 12 and 24 months. Conclusions  Both groups showed clinically relevant and long lasting decreases in HbA1c, rates of severe hypoglycaemia, and improved psychological measures, although few participants achieved glucose levels currently recommended by national and international guidelines. Adding pump treatment to structured training in flexible intensive insulin treatment did not substantially enhance educational benefits on glycaemic control, hypoglycaemia, or psychosocial outcomes in adults with type 1 diabetes. These results do not support a policy of providing insulin pumps to adults with poor glycaemic control until the effects of training on participants' level of engagement in intensive self management have been determined. Trial registration  Current Controlled Trials ISRCTN61215213. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Results from a tethered rocket experiment (Charge-2)

NASA Astrophysics Data System (ADS)

Kawashima, N.; Sasaki, S.; Oyama, K. I.; Hirao, K.; Obayashi, T.; Raitt, W. J.; White, A. B.; Williamson, P. R.; Banks, P. M.; Sharp, W. F.

A tethered payload experiment (Charge-2) was carried out as an international program between Japan and the USA using a NASA sounding rocket at White Sands Missile Range. The objective of the experiment was to perform a new type of active experiment in space by injecting an electron beam from a mother-daughter rocket system connected with a long tether wire. The electron beam with voltage and current up to 1 kV and 80 mA (nominal) was injected from the mother payload. An insulated conductive wire of 426 m length connected the two payloads, the longest tether system flown so far. The electron gun system and diagnostic instruments (plasma, optical, particle and wave) functioned correctly throughout the flight. The potential rise of the mother payload during the electron beam emission was measured with respect to the daughter payload. The beam trajectory was detected by a camera onboard the mother rocket. Wave generation and current induction in the wire during the beam emission were also studied.

Internal fabrics in magmatic plutons emplaced in extended brittle crust - insight from analogue models with AMS (Anisotropy of Magnetic Susceptibility)

NASA Astrophysics Data System (ADS)

Mirzaei, Masoud; Zavada, Prokop; Machek, Matej; Roxerova, Zuzana

2016-04-01

Magma emplacement in extended brittle crust was simulated by injecting plaster of Paris (magma) into a large sandbox with central deformable rubber sheet. Analog magma is during the experiments injected through small circular inlet cut in the center of the elastic sheet. Injection force oscillation during the steadily evacuating analog magma was recorded during the experiments and regularly showed 3-4 increases followed by a quick drop. The recorded oscillation amplitude is largest for static injection without extension of the sandbox, which formed a columnar body with concentric and zonal internal fabric. Experiments including normal or oblique 20% extension resulted in along rift axis elongated oblate ellipsoidal pluton with rift parallel ridges in the top part of the pluton. Inspection of horizontal profiles show bone-shaped internal zoning patterns limited by conjugate sets of shear zones. Orientation of these internal shear zones is correlated with the sand-clock fault pattern developed in the overburden sand pack. Another set of shear zones parallel with the long axes of the plutons (rift axis) are associated with successive emplacement of distinct plaster pulses during the buildup of the entire body. The innermost lastly emplaced pulses of plaster display weak vertical magnetic fabrics with vertical lineations, while the outer shells of already emplaced plaster reveal stronger and margin parallel oblate magnetic fabrics with subhorizontal lineations. We interpret the vertical innermost fabrics as a result of active ascent of plaster from the injection inlet, while the fabrics in the outer zones likely reflect push due to inflation of the inner domain reflected in the reworking of the magnetic fabric.

Botulinum toxin type-A injection to treat patients with intractable anismus unresponsive to simple biofeedback training

PubMed Central

Zhang, Yong; Wang, Zhen-Ning; He, Lei; Gao, Ge; Zhai, Qing; Yin, Zhi-Tao; Zeng, Xian-Dong

2014-01-01

AIM: To evaluate the efficacy of botulinum toxin type A injection to the puborectalis and external sphincter muscle in the treatment of patients with anismus unresponsive to simple biofeedback training. METHODS: This retrospective study included 31 patients suffering from anismus who were unresponsive to simple biofeedback training. Diagnosis was made by anorectal manometry, balloon expulsion test, surface electromyography of the pelvic floor muscle, and defecography. Patients were given botulinum toxin type A (BTX-A) injection and pelvic floor biofeedback training. Follow-up was conducted before the paper was written. Improvement was evaluated using the chronic constipation scoring system. RESULTS: BTX-A injection combined with pelvic floor biofeedback training achieved success in 24 patients, with 23 maintaining persistent satisfaction during a mean period of 8.4 mo. CONCLUSION: BTX-A injection combined with pelvic floor biofeedback training seems to be successful for intractable anismus. PMID:25253964

Botulinum toxin type-A injection to treat patients with intractable anismus unresponsive to simple biofeedback training.

PubMed

Zhang, Yong; Wang, Zhen-Ning; He, Lei; Gao, Ge; Zhai, Qing; Yin, Zhi-Tao; Zeng, Xian-Dong

2014-09-21

To evaluate the efficacy of botulinum toxin type A injection to the puborectalis and external sphincter muscle in the treatment of patients with anismus unresponsive to simple biofeedback training. This retrospective study included 31 patients suffering from anismus who were unresponsive to simple biofeedback training. Diagnosis was made by anorectal manometry, balloon expulsion test, surface electromyography of the pelvic floor muscle, and defecography. Patients were given botulinum toxin type A (BTX-A) injection and pelvic floor biofeedback training. Follow-up was conducted before the paper was written. Improvement was evaluated using the chronic constipation scoring system. BTX-A injection combined with pelvic floor biofeedback training achieved success in 24 patients, with 23 maintaining persistent satisfaction during a mean period of 8.4 mo. BTX-A injection combined with pelvic floor biofeedback training seems to be successful for intractable anismus.

Controlled injection using a channel pinch in a plasma-channel-guided laser wakefield accelerator

NASA Astrophysics Data System (ADS)

Liu, Jiaqi; Zhang, Zhijun; Liu, Jiansheng; Li, Wentao; Wang, Wentao; Yu, Changhai; Qi, Rong; Qin, Zhiyong; Fang, Ming; Wu, Ying; Feng, Ke; Ke, Lintong; Wang, Cheng; Li, Ruxin

2018-06-01

Plasma-channel-guided laser plasma accelerators make it possible to drive high-brilliance compact radiation sources and have high-energy physics applications. Achieving tunable internal injection of the electron beam (e beam) inside the plasma channel, which realizes a tunable radiation source, is a challenging method to extend such applications. In this paper, we propose the use of a channel pinch, which is designed as an initial reduction followed by an expansion of the channel radius along the plasma channel, to achieve internal controlled off-axis e beam injection in a channel-guided laser plasma accelerator. The off-axis injection is triggered by bubble deformation in the expansion region. The dynamics of the plasma wake is explored, and the trapping threshold is found to be reduced radially in the channel pinch. Simulation results show that the channel pinch not only triggers injection process localized at the pinch but also modulates the parameters of the e beam by adjusting its density profile, which can additionally accommodate a tunable radiation source via betatron oscillation.

The Classification and Prognosis of Periocular Complications Related to Blindness following Cosmetic Filler Injection.

PubMed

Myung, Yujin; Yim, Sangjun; Jeong, Jae Hoon; Kim, Baek-Kyu; Heo, Chan-Yeong; Baek, Rong-Min; Pak, Chang-Sik

2017-07-01

Common side effects during hyaluronic acid filler injections are typically mild and reversible, but several reports of blindness have received attention. The present study focused on orbital symptoms combined with blindness, aiming to classify affected patients and predict their disease course and prognosis. From September of 2012 to August of 2015, nine patients with vision loss after filler injection were retrospectively reviewed. Ptosis, ophthalmoplegia, and enophthalmos were recorded over a 6-month follow-up, and patients were classified into four types according to periocular symptom manifestation. Two patients were categorized as type I (blindness without ptosis or ophthalmoplegia), two patients as type II (blindness and ptosis without ophthalmoplegia), two patients as type III (blindness and ophthalmoplegia without ptosis), and three patients as type IV (blindness with ptosis and ophthalmoplegia). The present study includes previously unpublished information about orbital symptom manifestations and prognosis combined with blindness caused by retinal artery occlusion after cosmetic filler injection. Therapeutic, V.

Safety and effectiveness of collagenase clostridium histolyticum in the treatment of Peyronie's disease using a new modified shortened protocol.

PubMed

Abdel Raheem, Amr; Capece, Marco; Kalejaiye, Odunayo; Abdel-Raheem, Tarek; Falcone, Marco; Johnson, Mark; Ralph, Oliver G; Garaffa, Giulio; Christopher, Andrew N; Ralph, David J

2017-11-01

To evaluate the efficacy and safety of collagenase clostridium histolyticum (CCH; Xiapex ® , Xiaflex ® ) in the treatment of Peyronie's disease (PD) using a new modified treatment protocol that aims at reducing the number of injections needed and reducing patient visits, thus reducing the duration and cost of treatment. A prospective study of 53 patients with PD who had treatment with CCH at a single centre using a new modified protocol. The angle of curvature assessment after an intracavernosal injection of prostaglandin E1, the International Index of Erectile Function (IIEF) and Peyronie's Disease Questionnaire (PDQ) were completed at baseline and at week 12 (4 weeks after the last injection). The Global Assessment of Peyronie's disease (GAPD) questionnaire was completed at week 12. Under a penile block of 10 mL plain lignocaine 1%, a total of three intralesional injections of CCH (0.9 mg) were given at 4-weekly intervals using a new modified injection technique. In between injections patients used a combination of home modelling, stretching and a vacuum device on a daily basis to mechanically stretch the plaque. Investigator modelling was not performed. The mean (range) penile curvature at baseline was 54 (30-90)°. Of the 53 patients in the study, 51 patients (96.2%) had an improvement in the angel of curvature by a mean (range) of 17.36 (0-40)° or 31.4 (0-57)% from baseline after three CCH injections. The final mean (range) curvature was 36.9 (12-75)° (P < 0.001). There was an improvement in each of the IIEF questionnaire domains, all three PDQ domains and the GAPD. CCH was well tolerated by all patients with only mild and transient local adverse events. The new shortened protocol using CCH treatment is safe, effective, and cost efficient. The results of using only three CCH injections according to this modified protocol are comparable to those of the clinical trials that used eight CCH injections. © 2017 The Authors BJU International © 2017 BJU International Published by John Wiley & Sons Ltd.

The effectiveness of multimedia education for patients with type 2 diabetes mellitus.

PubMed

Huang, Mei-Chuan; Hung, Chich-Hsiu; Yu, Ching-Yun; Berry, Diane C; Shin, Shyi-Jang; Hsu, Yu-Yun

2017-04-01

The aim of this study was to explore the effectiveness of two types of health education on improving knowledge concerning diabetes and insulin injection, insulin injection skills and self-efficacy, satisfaction with health education and glycated haemoglobin (HbA1c) and creatinine levels among patients with type 2 diabetes who began insulin therapy using a pen injector. Insulin therapy is recommended to facilitate the regulation of plasma glucose; however, patient's acceptance of insulin therapy is generally low. Healthcare providers should help them improve their knowledge of diabetes and insulin injection, as well as their insulin injection skills. A randomized repeated measures experimental study design. The experimental (n = 21) and control (n = 21) groups received multimedia and regular health education programmes, respectively from October 2013-August 2014. Four structured questionnaires were used and videotapes were applied to demonstrate injection skills. Generalized estimating equations showed that the experimental group's scores were significantly higher than those of the control group for diabetes and insulin injection knowledge, insulin injection skills, self-efficacy in insulin injection and satisfaction with health education. On the other hand, an analysis of covariance revealed glycated hemoglobin (HbA1c) and creatinine levels did not differ significantly between the two groups. Implementation of a multimedia diabetes education programme could improve patients' diabetes and insulin injection knowledge, insulin injection skills, self-efficacy in insulin injection and satisfaction with health education. Healthcare providers should improve quality of patient care by providing multimedia diabetes health education. © 2016 John Wiley & Sons Ltd.

Chloramphenicol Injection

MedlinePlus

... treat certain types of serious infections caused by bacteria when other antibiotics cannot be used. Chloramphenicol injection ... antibiotics. It works by stopping the growth of bacteria..Antibiotics such as chloramphenicol injection will not work ...

The relative roles of external and internal CO(2) versus H(+) in eliciting the cardiorespiratory responses of Salmo salar and Squalus acanthias to hypercarbia.

PubMed

Perry, S F; McKendry, J E

2001-11-01

Fish breathing hypercarbic water encounter externally elevated P(CO(2)) and proton levels ([H(+)]) and experience an associated internal respiratory acidosis, an elevation of blood P(CO(2)) and [H(+)]. The objective of the present study was to assess the potential relative contributions of CO(2) versus H(+) in promoting the cardiorespiratory responses of dogfish (Squalus acanthias) and Atlantic salmon (Salmo salar) to hypercarbia and to evaluate the relative contributions of externally versus internally oriented receptors in dogfish. In dogfish, the preferential stimulation of externally oriented branchial chemoreceptors using bolus injections (50 ml kg(-1)) of CO(2)-enriched (4 % CO(2)) sea water into the buccal cavity caused marked cardiorespiratory responses including bradycardia (-4.1+/-0.9 min(-1)), a reduction in cardiac output (-3.2+/-0.6 ml min(-1) kg(-1)), an increase in systemic vascular resistance (+0.3+/-0.2 mmHg ml min(-1) kg(-1)), arterial hypotension (-1.6+/-0.2 mmHg) and an increase in breathing amplitude (+0.3+/-0.09 mmHg) (means +/- S.E.M., N=9-11). Similar injections of CO(2)-free sea water acidified to the corresponding pH of the hypercarbic water (pH 6.3) did not significantly affect any of the measured cardiorespiratory variables (when compared with control injections). To preferentially stimulate putative internal CO(2)/H(+) chemoreceptors, hypercarbic saline (4 % CO(2)) was injected (2 ml kg(-1)) into the caudal vein. Apart from an increase in arterial blood pressure caused by volume loading, internally injected CO(2) was without effect on any measured variable. In salmon, injection of hypercarbic water into the buccal cavity caused a bradycardia (-13.9+/-3.8 min(-1)), a decrease in cardiac output (-5.3+/-1.2 ml min(-1) kg(-1)), an increase in systemic resistance (0.33+/-0.08 mmHg ml min(-1) kg(-1)) and increases in breathing frequency (9.7+/-2.2 min(-1)) and amplitude (1.2+/-0.2 mmHg) (means +/- S.E.M., N=8-12). Apart from a small increase in breathing amplitude (0.4+/-0.1 mmHg), these cardiorespiratory responses were not observed after injection of acidified water. These results demonstrate that, in dogfish and salmon, the external chemoreceptors linked to the initiation of cardiorespiratory responses during hypercarbia are predominantly stimulated by the increase in water P(CO(2)) rather than by the accompanying decrease in water pH. Furthermore, in dogfish, the cardiorespiratory responses to hypercarbia are probably exclusively derived from the stimulation of external CO(2) chemoreceptors, with no apparent contribution from internally oriented receptors.

Injection related anxiety in insulin-treated diabetes.

PubMed

Zambanini, A; Newson, R B; Maisey, M; Feher, M D

1999-12-01

The presence of injection related anxiety and phobia may influence compliance, glycaemic control and quality of life in patients with insulin-treated diabetes. Unselected consecutive, insulin-treated patients attending a diabetes clinic for follow-up, completed a standardised questionnaire providing an injection anxiety score (IAS) and general anxiety score (GAS). A total of 115 insulin-treated (80 Type 1 and 35 Type 2) diabetic patients completed the questionnaire. Injections had been avoided secondary to anxiety in 14% of cases and 42% expressed concern at having to inject more frequently. An IAS > or = 3 was seen in 28% of patients and of these, 66% injected insulin one to two times/day, 45% had avoided injections, and 70% would be bothered by more frequent injections. A significant correlation between IAS and GAS was seen (Kendall's tau-a 0.30, 95% CI 0.19-0.41, P < 0.001). GAS was significantly associated with both previous injection avoidance and expressed concern at increased injection frequency. No significant correlation was seen with HbA1c and injection or general anxiety scores. Symptoms relating to insulin injection anxiety and phobia have a high prevalence in an unselected group of diabetic patients requiring insulin injections and are associated with higher levels of general anxiety.

Polymorphisms in the lcrV gene of Yersinia enterocolitica and their effect on plague protective immunity.

PubMed

Miller, Nathan C; Quenee, Lauriane E; Elli, Derek; Ciletti, Nancy A; Schneewind, Olaf

2012-04-01

Current efforts to develop plague vaccines focus on LcrV, a polypeptide that resides at the tip of type III secretion needles. LcrV-specific antibodies block Yersinia pestis type III injection of Yop effectors into host immune cells, thereby enabling phagocytes to kill the invading pathogen. Earlier work reported that antibodies against Y. pestis LcrV cannot block type III injection by Yersinia enterocolitica strains and suggested that lcrV polymorphisms may provide for escape from LcrV-mediated plague immunity. We show here that polyclonal or monoclonal antibodies raised against Y. pestis KIM D27 LcrV (LcrV(D27)) bind LcrV from Y. enterocolitica O:9 strain W22703 (LcrV(W22703)) or O:8 strain WA-314 (LcrV(WA-314)) but are otherwise unable to block type III injection by Y. enterocolitica strains. Replacing the lcrV gene on the pCD1 virulence plasmid of Y. pestis KIM D27 with either lcrV(W22703) or lcrV(WA-314) does not affect the ability of plague bacteria to secrete proteins via the type III pathway, to inject Yops into macrophages, or to cause lethal plague infections in mice. LcrV(D27)-specific antibodies blocked type III injection by Y. pestis expressing lcrV(W22703) or lcrV(WA-314) and protected mice against intravenous lethal plague challenge with these strains. Thus, although antibodies raised against LcrV(D27) are unable to block the type III injection of Y. enterocolitica strains, expression of lcrV(W22703) or lcrV(WA-314) in Y. pestis did not allow these strains to escape LcrV-mediated plague protective immunity in the intravenous challenge model.

Injection Drug Use Trajectories Among Migrant Populations: A Narrative Review.

PubMed

Melo, Jason S; Mittal, Maria Luisa; Horyniak, Danielle; Strathdee, Steffanie A; Werb, Dan

2018-01-24

Dual epidemics of injection drug use and blood-borne disease, characterized as "syndemics," are present in a range of settings. Behaviors that drive such syndemics are particularly prevalent among mobile drug-using populations, for whom cross-border migration may pose additional risks. This narrative review aims to characterize the risk factors for injection drug use initiation associated with migration, employing a risk environment framework and focusing on the San Diego-Tijuana border region as the most dynamic example of these phenomena. Based on previous literature, we divide migration streams into three classes: intra-urban, internal, and international. We synthesized existing literature on migration and drug use to characterize how mobility and migration drive the initiation of injection drug use, as well as the transmission of hepatitis and HIV, and to delineate how these might be addressed through public health intervention. Population mixing between migrants and receiving communities and the consequent transmission of social norms about injection drug use create risk environments for injection drug use initiation. These risk environments have been characterized as a result of local policy environments, injection drug use norms in receiving communities, migration-related stressors, social dislocation, and infringement on the rights of undocumented migrants. Policies that exacerbate risk environments for migrants may inadvertently contribute to the expansion of epidemics of injection-driven blood-borne disease. Successful interventions that address emerging syndemics in border regions may therefore need to be tailored to migrant populations and distinguish between the vulnerabilities experienced by different migration classes and border settings.

Calcium and zinc DTPA administration for internal contamination with plutonium-238 and americium-241.

PubMed

Kazzi, Ziad N; Heyl, Alexander; Ruprecht, Johann

2012-08-01

The accidental or intentional release of plutonium or americium can cause acute and long term adverse health effects if they enter the human body by ingestion, inhalation, or injection. These effects can be prevented by rapid removal of these radionuclides by chelators such as calcium or zinc diethylenetriaminepentaacetate (calcium or zinc DTPA). These compounds have been shown to be efficacious in enhancing the elimination of members of the actinide family particularly plutonium and americium when administered intravenously or by nebulizer. The efficacy and adverse effects profile depend on several factors that include the route of internalization of the actinide, the type, and route time of administration of the chelator, and whether the calcium or zinc salt of DTPA is used. Current and future research efforts should be directed at overcoming limitations associated with the use of these complex drugs by using innovative methods that can enhance their structural and therapeutic properties.

Effect of Chamber Backpressure on Swirl Injector Fluid Mechanics

NASA Technical Reports Server (NTRS)

Kenny, R. Jeremy; Hulka, James R.; Moser, Marlow D.; Rhys, Noah O.

2008-01-01

A common propellant combination used for high thrust generation is GH2/LOX. Historical GH2/LOX injection elements have been of the shear-coaxial type. Element type has a large heritage of research work to aid in element design. The swirl-coaxial element, despite its many performance benefits, has a relatively small amount of historical, LRE-oriented work to draw from. Design features of interest are grounded in the fluid mechanics of the liquid swirl process itself, are based on data from low-pressure, low mass flow rate experiments. There is a need to investigate how high ambient pressures and mass flow rates influence internal and external swirl features. The objective of this research is to determine influence of varying liquid mass flow rate and ambient chamber pressure on the intact-length fluid mechanics of a liquid swirl element.

Overview of recent HL-2A experiments

NASA Astrophysics Data System (ADS)

Duan, X. R.; Liu, Yi; Xu, M.; Yan, L. W.; Xu, Y.; Song, X. M.; Dong, J. Q.; Ding, X. T.; Chen, L. Y.; Lu, B.; Liu, D. Q.; Rao, J.; Xuan, W. M.; Yang, Q. W.; Zheng, G. Y.; Zou, X. L.; Liu, Y. Q.; Zhong, W. L.; Zhao, K. J.; Ji, X. Q.; Mao, W. C.; Wang, Q. M.; Li, Q.; Cao, J. Y.; Cao, Z.; Lei, G. J.; Zhang, J. H.; Li, X. D.; Bai, X. Y.; Cheng, J.; Chen, W.; Cui, Z. Y.; Delpech, L.; Diamond, P. H.; Dong, Y. B.; Ekedahl, A.; Hoang, T.; Huang, Y.; Ida, K.; Itoh, K.; Itoh, S.-I.; Isobe, M.; Inagaki, S.; Mazon, D.; Morita, S.; Peysson, Y.; Shi, Z. B.; Wang, X. G.; Xiao, G. L.; Yu, D. L.; Yu, L. M.; Zhang, Y. P.; Zhou, Y.; Cui, C. H.; Feng, B. B.; Huang, M.; Li, Y. G.; Li, B.; Li, G. S.; Li, H. J.; Li, Qing; Peng, J. F.; Wang, Y. Q.; Yuan, B. S.; Liu, Yong; HL-2A Team

2017-10-01

Since the last Fusion Energy Conference, significant progress has been made in the following areas. The first high coupling efficiency low-hybrid current drive (LHCD) with a passive-active multi-junction (PAM) antenna was successfully demonstrated in the H-mode on the HL-2A tokamak. Double critical impurity gradients of electromagnetic turbulence were observed in H-mode plasmas. Various ELM mitigation techniques have been investigated, including supersonic molecular beam injection (SMBI), impurity seeding, resonant magnetic perturbation (RMP) and low-hybrid wave (LHW). The ion internal transport barrier was observed in neutral beam injection (NBI) heated plasmas. Neoclassical tearing modes (NTMs) driven by the transient perturbation of local electron temperature during non-local thermal transport events have been observed, and a new type of non-local transport triggered by the ion fishbone was found. A long-lasting runaway electron plateau was achieved after argon injection and the runaway current was successfully suppressed by SMBI. It was found that low-n Alfvénic ion temperature gradient (AITG) modes can be destabilized in ohmic plasmas, even with weak magnetic shear and low-pressure gradients. For the first time, the synchronization of geodesic acoustic mode (GAM) and magnetic fluctuations was observed in edge plasmas, revealing frequency entrainment and phase lock. The spatiotemporal features of zonal flows were also studied using multi-channel correlation Doppler reflectometers.

Secondary air injection system and method

DOEpatents

Wu, Ko-Jen; Walter, Darrell J.

2014-08-19

According to one embodiment of the invention, a secondary air injection system includes a first conduit in fluid communication with at least one first exhaust passage of the internal combustion engine and a second conduit in fluid communication with at least one second exhaust passage of the internal combustion engine, wherein the at least one first and second exhaust passages are in fluid communication with a turbocharger. The system also includes an air supply in fluid communication with the first and second conduits and a flow control device that controls fluid communication between the air supply and the first conduit and the second conduit and thereby controls fluid communication to the first and second exhaust passages of the internal combustion engine.

Treatment of chronic neurogenic cough with in-office superior laryngeal nerve block.

PubMed

Simpson, C Blake; Tibbetts, Kathleen M; Loochtan, Michael J; Dominguez, Laura M

2018-04-18

Neurogenic cough is believed to result from a sensory neuropathy involving the internal branch of the superior laryngeal nerve (SLN). We present our outcomes for the treatment of neurogenic cough with localized blockade of the internal branch of the SLN. A retrospective chart review of patients who underwent in-office percutaneous SLN block for treatment of neurogenic cough between 2015 and 2017 was conducted. Patient demographics, indications for injection, and response to treatment were recorded and analyzed. Cough severity index (CSI) scores before and after treatment were compared. Twenty-three patients underwent percutaneous blockade of the internal branch of the SLN in the clinic setting, and five patients were excluded for incomplete records. The indication was neurogenic cough as a diagnosis of exclusion. The injectable substance used was a 1:1 mixture of a long-acting particulate corticosteroid and a local anesthetic. Unilateral injections were performed in 13 patients, and five patients underwent bilateral injections. Of the unilateral injections, 10 were left-sided. Patients underwent an average of 2.4 SLN block procedures (range 1-7). Mean follow-up time postinjection was 85.4 days (7-450 days). Cough severity index scores decreased significantly from an average of 26.8 pretreatment to 14.6 posttreatment (P < 0.0001). The SLN block is an effective treatment for neurogenic cough, with average CSI scores significantly improved following injection. Further study is necessary to determine the characteristics of patients' responses to treatment, long-term outcomes, and efficacy of the procedure when compared to placebo and other accepted treatments for neurogenic cough. 4. Laryngoscope, 2018. © 2018 The American Laryngological, Rhinological and Otological Society, Inc.

Patterns of HIV prevalence among injecting drug users in the cross-border area of Lang Son Province, Vietnam, and Ning Ming County, Guangxi Province, China.

PubMed

Des Jarlais, Don C; Johnston, Patrick; Friedmann, Patricia; Kling, Ryan; Liu, Wei; Ngu, Doan; Chen, Yi; Hoang, Tran V; Donghua, Meng; Van, Ly K; Tung, Nguyen D; Binh, Kieu T; Hammett, Theodore M

2005-08-24

To assess patterns of injecting drug use and HIV prevalence among injecting drug users (IDUs) in an international border area along a major heroin trans-shipment route. Cross-sectional surveys of IDUs in 5 sites in Lang Son Province, Vietnam (n = 348) and 3 sites in Ning Ming County, Guangxi Province, China (n = 308). Respondents were recruited through peer referral ("snowball") methods in both countries, and also from officially recorded lists of IDUs in Vietnam. A risk behavior questionnaire was administered and HIV counseling and testing conducted. Participants in both countries were largely male, in their 20s, and unmarried. A majority of subjects in both countries were members of ethnic minority groups. There were strong geographic gradients for length of drug injecting and for HIV seroprevalence. Both mean years injecting and HIV seroprevalence declined from the Vietnamese site farthest from the border to the Chinese site farthest from the border. 10.6% of participants in China and 24.5% of participants in Vietnam reported crossing the international border in the 6 months prior to interview. Crossing the border by IDUs was associated with (1) distance from the border, (2) being a member of an ethnic minority group, and (3) being HIV seropositive among Chinese participants. Reducing the international spread of HIV among IDUs will require programs at the global, regional, national, and "local cross border" levels. At the local cross border level, the programs should be coordinated on both sides of the border and on a sufficient scale that IDUs will be able to readily obtain clean injection equipment on the other side of the border as well as in their country of residence.

Patterns of HIV prevalence among injecting drug users in the cross-border area of Lang Son Province, Vietnam, and Ning Ming County, Guangxi Province, China

PubMed Central

Des Jarlais, Don C; Johnston, Patrick; Friedmann, Patricia; Kling, Ryan; Liu, Wei; Ngu, Doan; Chen, Yi; Hoang, Tran V; Donghua, Meng; Van, Ly K; Tung, Nguyen D; Binh, Kieu T; Hammett, Theodore M

2005-01-01

Background To assess patterns of injecting drug use and HIV prevalence among injecting drug users (IDUs) in an international border area along a major heroin trans-shipment route. Methods Cross-sectional surveys of IDUs in 5 sites in Lang Son Province, Vietnam (n = 348) and 3 sites in Ning Ming County, Guangxi Province, China (n = 308). Respondents were recruited through peer referral ("snowball") methods in both countries, and also from officially recorded lists of IDUs in Vietnam. A risk behavior questionnaire was administered and HIV counseling and testing conducted. Results Participants in both countries were largely male, in their 20s, and unmarried. A majority of subjects in both countries were members of ethnic minority groups. There were strong geographic gradients for length of drug injecting and for HIV seroprevalence. Both mean years injecting and HIV seroprevalence declined from the Vietnamese site farthest from the border to the Chinese site farthest from the border. 10.6% of participants in China and 24.5% of participants in Vietnam reported crossing the international border in the 6 months prior to interview. Crossing the border by IDUs was associated with (1) distance from the border, (2) being a member of an ethnic minority group, and (3) being HIV seropositive among Chinese participants. Conclusion Reducing the international spread of HIV among IDUs will require programs at the global, regional, national, and "local cross border" levels. At the local cross border level, the programs should be coordinated on both sides of the border and on a sufficient scale that IDUs will be able to readily obtain clean injection equipment on the other side of the border as well as in their country of residence. PMID:16120225

Evaluation of carcinogenic hazard of diesel engine exhaust needs to consider revolutionary changes in diesel technology.

PubMed

McClellan, Roger O; Hesterberg, Thomas W; Wall, John C

2012-07-01

Diesel engines, a special type of internal combustion engine, use heat of compression, rather than electric spark, to ignite hydrocarbon fuels injected into the combustion chamber. Diesel engines have high thermal efficiency and thus, high fuel efficiency. They are widely used in commerce prompting continuous improvement in diesel engines and fuels. Concern for health effects from exposure to diesel exhaust arose in the mid-1900s and stimulated development of emissions regulations and research to improve the technology and characterize potential health hazards. This included epidemiological, controlled human exposure, laboratory animal and mechanistic studies to evaluate potential hazards of whole diesel exhaust. The International Agency for Research on Cancer (1989) classified whole diesel exhaust as - "probably carcinogenic to humans". This classification stimulated even more stringent regulations for particulate matter that required further technological developments. These included improved engine control, improved fuel injection system, enhanced exhaust cooling, use of ultra low sulfur fuel, wall-flow high-efficiency exhaust particulate filters, exhaust catalysts, and crankcase ventilation filtration. The composition of New Technology Diesel Exhaust (NTDE) is qualitatively different and the concentrations of particulate constituents are more than 90% lower than for Traditional Diesel Exhaust (TDE). We recommend that future reviews of carcinogenic hazards of diesel exhaust evaluate NTDE separately from TDE. Copyright © 2012 Elsevier Inc. All rights reserved.

Febrile response to infection in the American alligator (Alligator mississippiensis).

PubMed

Merchant, Mark; Williams, Stephanie; Trosclair, Phillip L; Elsey, Ruth M; Mills, Kaili

2007-12-01

Temperature probes were inserted into the stomachs of juvenile American alligators (Alligator mississippiensis) maintained outdoors at ambient fluctuating temperatures. Internal body temperatures (T(b)) were measured every 15 min for two days, and then the alligators were injected with bacterial lipopolysaccharide (LPS), pyrogen-free saline, or left untreated. Alligators injected intraperitoneally with LPS exhibited maximum T(b)s 2.6+/-1.1 degrees C and 3.5+/-1.2 degrees C higher than untreated control animals on days one and two after treatment, respectively. T(b)s for these animals fell to within control ranges by day three postinjection. Similarly, mean preferred body temperatures (MPBTs) were significantly higher for LPS-injected alligators on days one (4.2+/-1.8 degrees C) and two (3.5+/-1.6 degrees C) after treatment. Intraperitoneal injection of heat-killed Aeromonas hydrophila, a gram-negative bacterium known to infect crocodilians, resulted in a fever while injection of Staphylococcus aureus (gram positive) did not elicit a febrile response. Injection of LPS in alligators maintained indoors in a constant temperature environment resulted in no increase in internal T(b). These results indicate that alligators did not exhibit a febrile response in the absence of a thermal gradient, and suggest that febrile responses observed are probably behavioral in nature.

The time lag and interval of discharge with a spring actuated fuel injection pump

NASA Technical Reports Server (NTRS)

Matthews, Robertson; Gardiner, A W

1923-01-01

Discussed here is research on a spring activated fuel pump for solid or airless injection with small, high speed internal combustion engines. The pump characteristics under investigation were the interval of fuel injection in terms of degrees of crank travel and in absolute time, the lag between the time the injection pump plunger begins its stroke and the appearance of the jet at the orifice, and the manner in which the fuel spray builds up to a maximum when the fuel valve is opened, and then diminishes.

Basics of Sterile Compounding: Biopharmaceutics of Injectable Dosage Forms.

PubMed

Akers, Michael J

2017-01-01

Biopharmaceutics studies the relationship between the drug product and what happens after the product is administered. Since the majority of injectables are administered by the intravenous route, thus avoiding the need for drug absorption, not many articles are published compared to other routes of drug administration. However, other routes of administration for drug injection are becoming more frequent because of greater commercial availability of sustained- and controlled-release drug delivery systems. This article reviews basic principles of drug absorption, distribution, metabolism, and elimination of injectable drugs and certain physicochemical and physiological factors affecting injectable drug biopharmaceutics. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

Levoleucovorin Injection

MedlinePlus

... injection is used to prevent harmful effects of methotrexate (Rheumatrex, Trexall) when methotrexate is used to to treat certain types of ... people who have accidentally received an overdose of methotrexate or similar medications. Levoleucovorin injection is in a ...

Botulinum Toxin Type a Injection, Followed by Home-Based Functional Training for Upper Limb Hemiparesis after Stroke

ERIC Educational Resources Information Center

Takekawa, Toru; Kakuda, Wataru; Taguchi, Kensuke; Ishikawa, Atsushi; Sase, Yousuke; Abo, Masahiro

2012-01-01

Botulinum toxin type A (BoNT-A) has been reported to be an effective treatment for limb spasticity after stroke. However, the reduction in the spasticity after BoNT-A injection alone does not ensure an improvement in the active motor function of the affected limb. The aim of this study was to clarify the clinical effects of a BoNT-A injection,…

Chemical regulation of spawning in the zebra mussel (Dreissena polymorpha)

USGS Publications Warehouse

Ram, Jeffrey L.; Nichols, S. Jerrine; Nalepa, Thomas F.; Schloesser, Donald W.

1992-01-01

Previous literature suggests that spawning in bivalves is chemically regulated, both by environmental chemical cues and by internal chemical mediators. In a model proposed for zebra mussels, chemicals from phytoplankton initially trigger spawning, and chemicals associated with gametes provide further stimulus for spawning. The response to environmental chemicals is internally mediated by a pathway utilizing serotonin (5-hydroxytryptamine, a neurotransmitter), which acts directly on both male and female gonads. The role of serotonin and most other aspects of the model have been tested only on bivalves other than zebra mussels. The effect of serotonin on zebra mussel spawning was tested. Serotonin (10-5 and 10-3 M) injected into ripe males induced spawning, but injection of serotonin into females did not. Gametes were not released by 10-6 serotonin; in most cases, serotonin injection did not release gametes from immature recipients. Serotonin injection provides a reliable means for identifying ripe male zebra mussels and for obtaining zebra mussel sperm without the need for dissection.

Treating Self-Injection Phobia in Patients Prescribed Injectable Medications: A Case Example Illustrating a Six-Session Treatment Model

ERIC Educational Resources Information Center

Cox, Darcy; Mohr, David C.; Epstein, Lucy

2004-01-01

This article provides a case description of a patient with multiple sclerosis prescribed interferon beta-1a (IFN[beta]-1a), a weekly intramuscular injection, who met "DSM-IV" criteria for specific phobia, blood/injection type. This patient successfully completed a 6-week manualized cognitive-behavioral treatment for self-injection anxiety. Issues…

Diesel Fuel Systems. Teacher Edition (Revised).

ERIC Educational Resources Information Center

Clark, Elton; Huston, Jane, Ed.

This module is one of a series of teaching guides that cover diesel mechanics. The module contains six instructional units that cover the following topics: (1) introduction to fuel injection systems and components; (2) injection nozzles; (3) distributor type injection pumps; (4) unit injectors; (5) in-line injection pumps; and (6) pressure timed…

Process influences and correction possibilities for high precision injection molded freeform optics

NASA Astrophysics Data System (ADS)

Dick, Lars; Risse, Stefan; Tünnermann, Andreas

2016-08-01

Modern injection molding processes offer a cost-efficient method for manufacturing high precision plastic optics for high volume applications. Besides form deviation of molded freeform optics, internal material stress is a relevant influencing factor for the functionality of a freeform optics in an optical system. This paper illustrates dominant influence parameters of an injection molding process relating to form deviation and internal material stress based on a freeform demonstrator geometry. Furthermore, a deterministic and efficient way for 3D mold correcting of systematic, asymmetrical shrinkage errors is shown to reach micrometer range shape accuracy at diameters up to 40 mm. In a second case, a stress-optimized parameter combination using unusual molding conditions was 3D corrected to reach high precision and low stress freeform polymer optics.

Neutralizing antibodies to botulinum neurotoxin type A in aesthetic medicine: five case reports

PubMed Central

Torres, Sebastian; Hamilton, Mark; Sanches, Elena; Starovatova, Polina; Gubanova, Elena; Reshetnikova, Tatiana

2014-01-01

Botulinum neurotoxin injections are a valuable treatment modality for many therapeutic indications as well as in the aesthetic field for facial rejuvenation. As successful treatment requires repeated injections over a long period of time, secondary resistance to botulinum toxin preparations after repeated injections is an ongoing concern. We report five case studies in which neutralizing antibodies to botulinum toxin type A developed after injection for aesthetic use and resulted in secondary treatment failure. These results add to the growing number of reports in the literature for secondary treatment failure associated with high titers of neutralizing antibodies in the aesthetic field. Clinicians should be aware of this risk and implement injection protocols that minimize resistance development. PMID:24379687

Explaining the Geographical Variation of HIV Among Injection Drug Users in the United States

PubMed Central

Ciccarone, D.; Bourgois, P.

2005-01-01

Distinct physical and chemical types of street heroin exist worldwide, but their impact on behavior and disease acquisition is not well understood or documented. This article presents a hypothesis to explain the unequal diffusion of HIV among injection drug users in the United States by examining the distribution and use of one type of heroin—“Mexican black tar.” Drawing on ethnographic, clinical, epidemiological, and laboratory data, we suggest that the chemical properties of black tar heroin promote the following safer injection practices: (1) the rinsing of syringes with water to prevent clogging; (2) the heating of cookers to promote dissolution; and (3) a rapid transition from venous injection to subcutaneous or intramuscular injections. PMID:14677781

Extraforaminal needle tip position reduces risk of intravascular injection in CT-fluoroscopic lumbar transforaminal epidural steroid injections

PubMed Central

Yu, Robinson K.; Ghodadra, Anish; Agarwal, Vikas

2016-01-01

Background Lumbar transforaminal epidural steroid injection is a common and effective tool for managing lumbar radicular pain, although accidental intravascular injection can rarely result in paralysis. The purpose of this study is to determine the safest needle tip position for computed tomography (CT)-guided lumbar transforaminal epidural steroid injections as determined by incidence of intravascular injection. Methods Three radiologists, in consensus, reviewed procedural imaging for consecutive CT-fluoroscopic lumbar transforaminal epidural steroid injections performed during a 16-month period. Intravascular injections were identified and categorized by needle tip position, vessel type injected, intravascular injection volume and procedural phase containing the intravascular injection. Pearson chi-square and logistic regression testing were used to assess differences between groups, as appropriate. Results Intravascular injections occurred in 9% (52/606) of injections. The intravascular injection rate was significantly lower (P<0.001) for extraforaminal needle position (0%, 0/109) compared to junctional (8%, 27/319) and foraminal (14%, 25/178) needle tip positions. Of the intravascular injections, 4% (2/52) were likely arterial, 35% (18/52) were likely venous, and 62% (32/52) were indeterminate for vessel type injected. 46% (24/52) of intravascular injections were large volume, 33% (17/52) were small volume, and 21% (11/52) were trace volume. 56% (29/52) of intravascular injections occurred with the contrast trial dose, 29% (15/52) with the steroid/analgesic cocktail, and 15% (8/52) with both. Conclusions An extraforaminal needle position for CT-fluoroscopic lumbar transforaminal epidural steroid injections decreases the risk of intravascular injection and therefore may be safer than other needle tip positions. PMID:28097241

A Novel Mechanism for Protein Delivery by the Type 3 Secretion System for Extracellularly Secreted Proteins.

PubMed

Tejeda-Dominguez, Farid; Huerta-Cantillo, Jazmin; Chavez-Dueñas, Lucia; Navarro-Garcia, Fernando

2017-03-28

The type 3 secretion system (T3SS) is essential for bacterial virulence through delivering effector proteins directly into the host cytosol. Here, we identified an alternative delivery mechanism of virulence factors mediated by the T3SS, which consists of the association of extracellularly secreted proteins from bacteria with the T3SS to gain access to the host cytosol. Both EspC, a protein secreted as an enteropathogenic Escherichia coli (EPEC) autotransporter, and YopH, a protein detected on the surface of Yersinia , require a functional T3SS for host cell internalization; here we provide biophysical and molecular evidence to support the concept of the EspC translocation mechanism, which requires (i) an interaction between EspA and an EspC middle segment, (ii) an EspC translocation motif (21 residues that are shared with the YopH translocation motif), (iii) increases in the association and dissociation rates of EspC mediated by EspA interacting with EspD, and (iv) an interaction of EspC with the EspD/EspB translocon pore. Interestingly, this novel mechanism does not exclude the injection model (i.e., EspF) operating through the T3SS conduit; therefore, T3SS can be functioning as an internal conduit or as an external railway, which can be used to reach the translocator pore, and this mechanism appears to be conserved among different T3SS-dependent pathogens. IMPORTANCE The type 3 secretion system is essential for injection of virulence factors, which are delivered directly into the cytosol of the host cells for usurping and subverting host processes. Recent studies have shown that these effectors proteins indeed travel inside an "injectisome" conduit through a single step of translocation by connecting the bacterium and host cell cytoplasms. However, all findings are not compatible with this model. For example, both YopH, a protein detected on the surface of Yersinia , and EspC, an autotransporter protein secreted by enteropathogenic E. coli , require a functional T3SS for host cell translocation. Both proteins have an intermediate extracellular step before their T3SS-dependent translocation. Here, we show an alternative delivery mechanism for these extracellularly secreted virulence factors that are then incorporated into the T3SS to enter the cells; this novel mechanism coexists with but diverges from the canonical injection model that involves the passage of the protein inside the injectisome. Copyright © 2017 Tejeda-Dominguez et al.

Evaluation of internal noise methods for Hotelling observers

NASA Astrophysics Data System (ADS)

Zhang, Yani; Pham, Binh T.; Eckstein, Miguel P.

2005-04-01

Including internal noise in computer model observers to degrade model observer performance to human levels is a common method to allow for quantitatively comparisons of human and model performance. In this paper, we studied two different types of methods for injecting internal noise to Hotelling model observers. The first method adds internal noise to the output of the individual channels: a) Independent non-uniform channel noise, b) Independent uniform channel noise. The second method adds internal noise to the decision variable arising from the combination of channel responses: a) internal noise standard deviation proportional to decision variable's standard deviation due to the external noise, b) internal noise standard deviation proportional to decision variable's variance caused by the external noise. We tested the square window Hotelling observer (HO), channelized Hotelling observer (CHO), and Laguerre-Gauss Hotelling observer (LGHO). The studied task was detection of a filling defect of varying size/shape in one of four simulated arterial segment locations with real x-ray angiography backgrounds. Results show that the internal noise method that leads to the best prediction of human performance differs across the studied models observers. The CHO model best predicts human observer performance with the channel internal noise. The HO and LGHO best predict human observer performance with the decision variable internal noise. These results might help explain why previous studies have found different results on the ability of each Hotelling model to predict human performance. Finally, the present results might guide researchers with the choice of method to include internal noise into their Hotelling models.

Evaluation of the impact of matrix effect on quantification of pesticides in foods by gas chromatography-mass spectrometry using isotope-labeled internal standards.

PubMed

Yarita, Takashi; Aoyagi, Yoshie; Otake, Takamitsu

2015-05-29

The impact of the matrix effect in GC-MS quantification of pesticides in food using the corresponding isotope-labeled internal standards was evaluated. A spike-and-recovery study of nine target pesticides was first conducted using paste samples of corn, green soybean, carrot, and pumpkin. The observed analytical values using isotope-labeled internal standards were more accurate for most target pesticides than that obtained using the external calibration method, but were still biased from the spiked concentrations when a matrix-free calibration solution was used for calibration. The respective calibration curves for each target pesticide were also prepared using matrix-free calibration solutions and matrix-matched calibration solutions with blank soybean extract. The intensity ratio of the peaks of most target pesticides to that of the corresponding isotope-labeled internal standards was influenced by the presence of the matrix in the calibration solution; therefore, the observed slope varied. The ratio was also influenced by the type of injection method (splitless or on-column). These results indicated that matrix-matching of the calibration solution is required for very accurate quantification, even if isotope-labeled internal standards were used for calibration. Copyright © 2015 Elsevier B.V. All rights reserved.

One-Year Relapse of Mandibular Distraction for Hemifacial Microsomia Using Masseteric Botulinum Toxin Type A Injections.

PubMed

Yin, Hong-Yu; Wang, Chuan; Zhang, Zhi-Yong; Shi, Lei; Yin, Lin; Liu, Wei; Feng, Shi; Cao, Yi-Lin; Tang, Xiao-Jun

2018-06-11

The relapse of hemifacial microsomia was thought to be highly related to the soft tissue envelope around the mandible angle mainly composed by masseter and medial pterygoid. According to the reason, we tried to apply masseter injection of type A botulinum toxin to weaken the soft envelope tension on the early stage post mandible distraction in adult HFM patients. Eight patients diagnosed with HFM were studied and randomly assigned to an experimental or control group. Patients in the experimental group were treated with DO, orthognathic surgeries, autologous fat grafting, and bilateral masseter muscle injection with type A botulinum toxin. The patients in control group were treated with the same procedures as the patients in experimental group except for masseter muscle injection with type A botulinum toxin. The recurrence rates of both groups were evaluated and analyzed after nearly 1 year of follow-up. The mean recurrence rate was 26.30% ± 11.84% (range 7.62%-37.27%) in the 8 patients after 1-year follow-up. The relapse rate was 16.32% ± 7.78% (7.62%-26.22%) in the experimental group and 36.28% ± 1.03% (34.84%-37.27%) in the control group. There was a significant difference (P = 0.002) between the experimental group and the control group. The combination of DO, orthognathic surgeries, autologous fat particle transplantation, and masseter muscle type A botulinum toxin injection technique could be a comprehensive treatment plan for adult patients of HFM. Furthermore, masseter injection of type A botulinum toxin might be an alternative method to reduce the early recurrence rate of postoperative adult patients of HFM.

Injection of beef strip loins with solutions containing sodium tripolyphosphate, sodium lactate, and sodium chloride to enhance palatability.

PubMed

Vote, D J; Platter, W J; Tatum, J D; Schmidt, G R; Belk, K E; Smith, G C; Speer, N C

2000-04-01

Beef strip loins (46 U.S. Choice loins and 49 U.S. Select loins) were used to evaluate the potential for enhancing beef tenderness, juiciness, and flavor by injecting fresh cuts with solutions containing sodium tripolyphosphate, sodium lactate, and sodium chloride. One half of each loin served as an untreated control, and the other half was injected with either distilled water (110% of raw weight) or a solution containing phosphate/lactate/chloride solution (107.5, 110, 112.5, or 115% of raw weight). All phosphate/lactate/chloride solutions were formulated to produce injected product concentrations of .25% sodium tripolyphosphate, .5% sodium chloride, and 2.5% sodium lactate. Ten additional U.S. Select loins were injected to 110% of raw weight with a phosphate-only solution (final product concentration of .25% sodium tripolyphosphate) for comparison with Select loins injected to 110% with phosphate/lactate/chloride and with distilled water. Steaks from each control and treated loin section were cooked to two final internal temperatures (66 degrees C and 77 degrees C) for sensory panel evaluation and shear force measurement. Injection of subprimal cuts with phosphate/lactate/chloride solutions improved tenderness (P < .05), juiciness (P < .05), and cooked beef flavor (P < .10) of strip loin steaks and was especially effective for maintaining tenderness and juiciness of steaks cooked to the higher final internal temperature. Injection of Select loins with a solution containing only sodium tripolyphosphate was not effective for improving beef tenderness or juiciness and tended to impart off-flavors characterized by sensory panelists as soapy and sour. Injection of fresh cuts with phosphate/lactate/chloride solutions could assist the beef industry's efforts to improve product quality and consistency.

p-Type modulation doped InGaN/GaN dot-in-a-wire white-light-emitting diodes monolithically grown on Si(111).

PubMed

Nguyen, H P T; Zhang, S; Cui, K; Han, X; Fathololoumi, S; Couillard, M; Botton, G A; Mi, Z

2011-05-11

Full-color, catalyst-free InGaN/GaN dot-in-a-wire light-emitting diodes (LEDs) were monolithically grown on Si(111) by molecular beam epitaxy, with the emission characteristics controlled by the dot properties in a single epitaxial growth step. With the use of p-type modulation doping in the dot-in-a-wire heterostructures, we have demonstrated the most efficient phosphor-free white LEDs ever reported, which exhibit an internal quantum efficiency of ∼56.8%, nearly unaltered CIE chromaticity coordinates with increasing injection current, and virtually zero efficiency droop at current densities up to ∼640 A/cm(2). The remarkable performance is attributed to the superior three-dimensional carrier confinement provided by the electronically coupled dot-in-a-wire heterostructures, the nearly defect- and strain-free GaN nanowires, and the significantly enhanced hole transport due to the p-type modulation doping.

Injected carrier concentration dependence of the expansion of single Shockley-type stacking faults in 4H-SiC PiN diodes

NASA Astrophysics Data System (ADS)

Tawara, T.; Matsunaga, S.; Fujimoto, T.; Ryo, M.; Miyazato, M.; Miyazawa, T.; Takenaka, K.; Miyajima, M.; Otsuki, A.; Yonezawa, Y.; Kato, T.; Okumura, H.; Kimoto, T.; Tsuchida, H.

2018-01-01

We investigated the relationship between the dislocation velocity and the injected carrier concentration on the expansion of single Shockley-type stacking faults by monitoring the electroluminescence from 4H-SiC PiN diodes with various anode Al concentrations. The injected carrier concentration was calculated using a device simulation that took into account the measured accumulated charge in the drift layer during diode turn-off. The dislocation velocity was strongly dependent on the injected hole concentration, which represents the excess carrier concentration. The activation energy of the dislocation velocity was quite small (below 0.001 eV between 310 and 386 K) over a fixed range of hole concentrations. The average threshold hole concentration required for the expansion of bar-shaped single Shockley-type stacking faults at the interface between the buffer layer and the substrate was determined to be 1.6-2.5 × 1016 cm-3 for diodes with a p-type epitaxial anode with various Al concentrations.

A Comparison of Fuel Sprays from Several Types of Injection Nozzles

NASA Technical Reports Server (NTRS)

Lee, Dana W

1936-01-01

This report presents the tests results of a series of tests made of the sprays from 14 fuel injection nozzles of 9 different types, the sprays being injected into air at atmospheric density and at 6 and 14 times atmospheric density. High-speed spark photographs of the sprays from each nozzle at each air density were taken at the rate of 2,000 per second, and from them were obtained the dimensions of the sprays and the rates of spray-tip penetration. The sprays were also injected against plasticine targets placed at different distances from the nozzles, and the impressions made in the plasticine were used as an indication of the distribution of the fuel within the spray. Cross-sectional sketches of the different types of sprays are given showing the relative sizes of the spray cores and envelopes. The characteristics of the sprays are compared and discussed with respect to their application to various types of engines.

The regulatory system for diabetes mellitus: Modeling rates of glucose infusions and insulin injections

NASA Astrophysics Data System (ADS)

Yang, Jin; Tang, Sanyi; Cheke, Robert A.

2016-08-01

Novel mathematical models with open and closed-loop control for type 1 or type 2 diabetes mellitus were developed to improve understanding of the glucose-insulin regulatory system. A hybrid impulsive glucose-insulin model with different frequencies of glucose infusions and insulin injections was analyzed, and the existence and uniqueness of the positive periodic solution for type 1 diabetes, which is globally asymptotically stable, was studied analytically. Moreover, permanence of the system for type 2 diabetes was demonstrated which showed that the glucose concentration level is uniformly bounded above and below. To investigate how to prevent hyperinsulinemia and hyperglycemia being caused by this system, we developed a model involving periodic intakes of glucose with insulin injections applied only when the blood glucose level reached a given critical glucose threshold. In addition, our numerical analysis revealed that the period, the frequency and the dose of glucose infusions and insulin injections are crucial for insulin therapies, and the results provide clinical strategies for insulin-administration practices.

Botulinum Toxin Type A Injections in the Psoas Muscle of Children with Cerebral Palsy: Muscle Atrophy after Motor End Plate-Targeted Injections

ERIC Educational Resources Information Center

Van Campenhout, Anja; Verhaegen, Ann; Pans, Steven; Molenaers, Guy

2013-01-01

MEP targeting during BoNT-A injections has been demonstrated to improve outcome. Two injection techniques of the psoas muscle--proximal MEP targeting versus a widely used more distal injection technique--are compared using muscle volume assessment by digital MRI segmentation as outcome measure. Method: 7 spastic diplegic children received…

Steroid injection for shoulder pain causes prolonged increased glucose level in type 1 diabetics

PubMed Central

Povlsen, Bo; Povlsen, Sebastian D

2014-01-01

Shoulder pain is very common in diabetic patients and often treated with steroid injections, with subsequent increases in blood glucose levels or the need for additional insulin being questioned. We report a case of significant and prolonged elevation of blood glucose levels and resultant insulin requirement in a type 1 diabetic man after a single 40 mg injection of triamcinolone for shoulder pain. Within 48 h, the shoulder pain as assessed by a visual analogue scale (0–10) was reduced to zero, but the elevated insulin requirements continued for 4 weeks after the injection. This finding suggests that steroid injections for shoulder pain in diabetics may not always be as safe as previously thought. We propose that medical practitioners advise their patients to monitor their glucose levels more carefully after such injections and that caution is exercised when considering administrating these injections to those who have poorly controlled blood glucose levels preinjection to avoid ketoacidosis. PMID:25199186

Steroid injection for shoulder pain causes prolonged increased glucose level in type 1 diabetics.

PubMed

Povlsen, Bo; Povlsen, Sebastian D

2014-09-08

Shoulder pain is very common in diabetic patients and often treated with steroid injections, with subsequent increases in blood glucose levels or the need for additional insulin being questioned. We report a case of significant and prolonged elevation of blood glucose levels and resultant insulin requirement in a type 1 diabetic man after a single 40 mg injection of triamcinolone for shoulder pain. Within 48 h, the shoulder pain as assessed by a visual analogue scale (0-10) was reduced to zero, but the elevated insulin requirements continued for 4 weeks after the injection. This finding suggests that steroid injections for shoulder pain in diabetics may not always be as safe as previously thought. We propose that medical practitioners advise their patients to monitor their glucose levels more carefully after such injections and that caution is exercised when considering administrating these injections to those who have poorly controlled blood glucose levels preinjection to avoid ketoacidosis. 2014 BMJ Publishing Group Ltd.

Numerical prediction of fiber orientation in injection-molded short-fiber/thermoplastic composite parts with experimental validation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thi, Thanh Binh Nguyen; Morioka, Mizuki; Yokoyama, Atsushi

Numerical prediction of the fiber orientation in the short-glass fiber (GF) reinforced polyamide 6 (PA6) composites with the fiber weight concentration of 30%, 50%, and 70% manufactured by the injection molding process is presented. And the fiber orientation was also directly observed and measured through X-ray computed tomography. During the injection molding process of the short-fiber/thermoplastic composite, the fiber orientation is produced by the flow states and the fiber-fiber interaction. Folgar and Tucker equation is the well known for modeling the fiber orientation in a concentrated suspension. They included into Jeffrey’s equation a diffusive type of term by introducing amore » phenomenological coefficient to account for the fiber-fiber interaction. Our developed model for the fiber-fiber interaction was proposed by modifying the rotary diffusion term of the Folgar-Tucker equation. This model was presented in a conference paper of the 29{sup th} International Conference of the Polymer Processing Society published by AIP conference proceeding. For modeling fiber interaction, the fiber dynamic simulation was introduced in order to obtain a global fiber interaction coefficient, which is sum function of the fiber concentration, aspect ratio, and angular velocity. The fiber orientation is predicted by using the proposed fiber interaction model incorporated into a computer aided engineering simulation package C-Mold. An experimental program has been carried out in which the fiber orientation distribution has been measured in 100 x 100 x 2 mm injection-molded plate and 100 x 80 x 2 mm injection-molded weld by analyzed with a high resolution 3D X-ray computed tomography system XVA-160α, and calculated by X-ray computed tomography imaging. The numerical prediction shows a good agreement with experimental validation. And the complex fiber orientation in the injection-molded weld was investigated.« less

GRIN: "GRoup versus INdividual physiotherapy following lower limb intra-muscular Botulinum Toxin-A injections for ambulant children with cerebral palsy: an assessor-masked randomised comparison trial": study protocol.

PubMed

Thomas, Rachel E; Johnston, Leanne M; Boyd, Roslyn N; Sakzewski, Leanne; Kentish, Megan J

2014-02-07

Cerebral palsy is the most common cause of physical disability in childhood. Spasticity is a significant contributor to the secondary impairments impacting functional performance and participation. The most common lower limb spasticity management is focal intramuscular injections of Botulinum Toxin-Type A accompanied by individually-delivered (one on one) physiotherapy rehabilitation. With increasing emphasis on improving goal-directed functional activity and participation within a family-centred framework, it is timely to explore whether physiotherapy provided in a group could achieve comparable outcomes, encouraging providers to offer flexible models of physiotherapy delivery. This study aims to compare individual to group-based physiotherapy following intramuscular Botulinum Toxin-A injections to the lower limbs for ambulant children with cerebral palsy aged four to fourteen years. An assessor-masked, block randomised comparison trial will be conducted with random allocation to either group-based or individual physiotherapy. A sample size of 30 (15 in each study arm) will be recruited. Both groups will receive six hours of direct therapy following Botulinum Toxin-A injections in either an individual or group format with additional home programme activities (three exercises to be performed three times a week). Study groups will be compared at baseline (T1), then at 10 weeks (T2, efficacy) and 26 weeks (T3, retention) post Botulinum Toxin-A injections. Primary outcomes will be caregiver/s perception of and satisfaction with their child's occupational performance goals (Canadian Occupational Performance Measure) and quality of gait (Edinburgh Visual Gait Score) with a range of secondary outcomes across domains of the International Classification of Disability, Functioning and Health. This paper outlines the study protocol including theoretical basis, study hypotheses and outcome measures for this assessor-masked, randomised comparison trial comparing group versus individual models of physiotherapy following intramuscular injections of Botulinum Toxin-A to the lower limbs for ambulant children with cerebral palsy. ACTRN12611000454976.

Numerical prediction of fiber orientation in injection-molded short-fiber/thermoplastic composite parts with experimental validation

NASA Astrophysics Data System (ADS)

Thi, Thanh Binh Nguyen; Morioka, Mizuki; Yokoyama, Atsushi; Hamanaka, Senji; Yamashita, Katsuhisa; Nonomura, Chisato

2015-05-01

Numerical prediction of the fiber orientation in the short-glass fiber (GF) reinforced polyamide 6 (PA6) composites with the fiber weight concentration of 30%, 50%, and 70% manufactured by the injection molding process is presented. And the fiber orientation was also directly observed and measured through X-ray computed tomography. During the injection molding process of the short-fiber/thermoplastic composite, the fiber orientation is produced by the flow states and the fiber-fiber interaction. Folgar and Tucker equation is the well known for modeling the fiber orientation in a concentrated suspension. They included into Jeffrey's equation a diffusive type of term by introducing a phenomenological coefficient to account for the fiber-fiber interaction. Our developed model for the fiber-fiber interaction was proposed by modifying the rotary diffusion term of the Folgar-Tucker equation. This model was presented in a conference paper of the 29th International Conference of the Polymer Processing Society published by AIP conference proceeding. For modeling fiber interaction, the fiber dynamic simulation was introduced in order to obtain a global fiber interaction coefficient, which is sum function of the fiber concentration, aspect ratio, and angular velocity. The fiber orientation is predicted by using the proposed fiber interaction model incorporated into a computer aided engineering simulation package C-Mold. An experimental program has been carried out in which the fiber orientation distribution has been measured in 100 x 100 x 2 mm injection-molded plate and 100 x 80 x 2 mm injection-molded weld by analyzed with a high resolution 3D X-ray computed tomography system XVA-160α, and calculated by X-ray computed tomography imaging. The numerical prediction shows a good agreement with experimental validation. And the complex fiber orientation in the injection-molded weld was investigated.

26 CFR 1.43-2 - Qualified enhanced oil recovery project.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 26 Internal Revenue 1 2014-04-01 2013-04-01 true Qualified enhanced oil recovery project. 1.43-2 Section 1.43-2 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY INCOME TAX INCOME... the tertiary recovery method; or (ii) Test or experimental injections. (2) Example. The following...

26 CFR 1.43-2 - Qualified enhanced oil recovery project.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 1 2011-04-01 2009-04-01 true Qualified enhanced oil recovery project. 1.43-2 Section 1.43-2 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY INCOME TAX INCOME... the tertiary recovery method; or (ii) Test or experimental injections. (2) Example. The following...

Electrical filtering in gerbil isolated type I semicircular canal hair cells

NASA Technical Reports Server (NTRS)

Rennie, K. J.; Ricci, A. J.; Correia, M. J.

1996-01-01

1. Membrane potential responses of dissociated gerbil type I semicircular canal hair cells to current injections in whole cell current-clamp have been measured. The input resistance of type I cells was 21.4 +/- 14.3 (SD) M omega, (n = 25). Around the zero-current potential (Vz = -66.6 +/- 9.3 mV, n = 25), pulsed current injections (from approximately -200 to 750 pA) produced only small-amplitude, pulse-like changes in membrane potential. 2. Injecting constant current to hyperpolarize the membrane to around -100 mV resulted in a approximately 10-fold increase in membrane resistance. Current pulses superimposed on this constant hyperpolarization produced larger and more complex membrane potential changes. Depolarizing currents > or = 200 pA caused a rapid transient peak voltage before a plateau. 3. Membrane voltage was able to faithfully follow sine-wave current injections around Vz over the range 1-1,000 Hz with < 25% attenuation at 1 kHz. A previously described K conductance, IKI, which is active at Vz, produces the low input resistance and frequency response. This was confirmed by pharmacologically blocking IKI. This conductance, present in type I cells but not type II hair cells, would appear to confer on type I cells a lower gain, but a much broader bandwidth at Vz, than seen in type II cells.

TRANSMISSION EXPERIMENTS WITH LEUCOSIS OF FOWLS

PubMed Central

Stubbs, E. L.; Furth, J.

1931-01-01

It is shown, in a carefully controlled experiment, that fowl leucemia can be readily transmitted from chicken to chicken by injection. Of 25 fowls, 13 were injected intravenously with blood from a chicken (No. 575) with erythroleucosis and 12 with blood from a chicken (No. 689) with myeloid leucosis. The injected birds and an equal number of uninjected controls were kept in tiers of alternating cages under as nearly identical conditions as possible. The donors, the controls, and the injected birds were all of the same stock and of the same age. In the two series 13 or 52 per cent of the 25 fowls inoculated developed leucemia within 4 to 10 weeks after injection. The two types of leucemia, erythroleucosis and myeloid leucosis, developed in both groups irrespective of the type used for injection. Among the uninjected controls no cases of erythroleucosis or of myeloid leucosis were observed. Lymphoid leucosis occurred in one injected fowl but since it also occurred in one control it may be assumed that it was probably not caused by the injected material. PMID:19869839

Large G protein α-subunit XLαs limits clathrin-mediated endocytosis and regulates tissue iron levels in vivo.

PubMed

He, Qing; Bouley, Richard; Liu, Zun; Wein, Marc N; Zhu, Yan; Spatz, Jordan M; Wang, Chia-Yu; Divieti Pajevic, Paola; Plagge, Antonius; Babitt, Jodie L; Bastepe, Murat

2017-11-07

Alterations in the activity/levels of the extralarge G protein α-subunit (XLαs) are implicated in various human disorders, such as perinatal growth retardation. Encoded by GNAS , XLαs is partly identical to the α-subunit of the stimulatory G protein (Gsα), but the cellular actions of XLαs remain poorly defined. Following an initial proteomic screen, we identified sorting nexin-9 (SNX9) and dynamins, key components of clathrin-mediated endocytosis, as binding partners of XLαs. Overexpression of XLαs in HEK293 cells inhibited internalization of transferrin, a process that depends on clathrin-mediated endocytosis, while its ablation by CRISPR/Cas9 in an osteocyte-like cell line (Ocy454) enhanced it. Similarly, primary cardiomyocytes derived from XLαs knockout (XLKO) pups showed enhanced transferrin internalization. Early postnatal XLKO mice showed a significantly higher degree of cardiac iron uptake than wild-type littermates following iron dextran injection. In XLKO neonates, iron and ferritin levels were elevated in heart and skeletal muscle, where XLαs is normally expressed abundantly. XLKO heart and skeletal muscle, as well as XLKO Ocy454 cells, showed elevated SNX9 protein levels, and siRNA-mediated knockdown of SNX9 in XLKO Ocy454 cells prevented enhanced transferrin internalization. In transfected cells, XLαs also inhibited internalization of the parathyroid hormone and type 2 vasopressin receptors. Internalization of transferrin and these G protein-coupled receptors was also inhibited in cells expressing an XLαs mutant missing the Gα portion, but not Gsα or an N-terminally truncated XLαs mutant unable to interact with SNX9 or dynamin. Thus, XLαs restricts clathrin-mediated endocytosis and plays a critical role in iron/transferrin uptake in vivo. Published under the PNAS license.

Physical Therapy for an Adult with Chronic Stroke after Botulinum Toxin Injection for Spasticity: A Case Report

PubMed Central

Phadke, Chetan P.; Ismail, Farooq; Boulias, Chris

2015-01-01

ABSTRACT Purpose: In this case report, we describe the type and duration of a physical therapy and botulinum toxin type A (BoNTA) intervention directed at lower limb spasticity and the gait and balance improvement in a patient post-stroke. Treatment of focal spasticity with BoNTA intramuscular injections combined with physical therapy is recommended by rehabilitation experts. However, the optimal type and duration of physical therapy intervention to optimize any functional gains that follow chemodenervation induced by BoNTA has not been established. Method: One individual with chronic stroke who received BoNTA injections for upper and lower extremity spasticity was included. Physical therapy intervention consisted of 45- to 60-min sessions twice weekly for 12 weeks, based on the Bobath–neurodevelopmental therapy approach, and an activity-based home program. Results: After BoNTA injections and physical therapy, the patient made clinically significant improvements in balance and gait speed and became more independent with his ambulation. Conclusions: This case report demonstrates that physical therapy after BoNTA injections can result in significant functional improvements for individuals with spasticity after chronic stroke that may not be possible with BoNTA injections alone. PMID:25931655

Tuberculin-induced delayed-type hypersensitivity reaction in a model of hu-PBMC-SCID mice grafted with autologous skin.

PubMed Central

Tsicopoulos, A.; Pestel, J.; Fahy, O.; Vorng, H.; Vandenbusche, F.; Porte, H.; Eraldi, L.; Wurtz, A.; Akoum, H.; Hamid, Q.; Wallaert, B.; Tonnel, A. B.

1998-01-01

We have developed an animal model to study human delayed-type hypersensitivity reactions. Previous studies in humans have shown after tuberculin injection the presence of a mononuclear cell infiltration, with almost no eosinophils, associated with a preferential Th-1-type cytokine profile. Human skin graft obtained from tuberculin-reactive donors was grafted onto the back of severe combined immunodeficient mice. After healing, mice were reconstituted intraperitoneally with peripheral mononuclear cells. Tuberculin and diluent were injected intradermally, and skin biopsies were performed 72 hours later. Skin grafts were divided into two parts, one for immunohistochemistry and one for in situ hybridization studies. Immunohistochemistry was performed on cryostat sections using the alkaline phosphatase anti-alkaline phosphatase technique. In the tuberculin-injected sites as compared with the diluent-injected sites, there were significant increases in the number of CD45+ pan leukocytes and CD4+, CD8+, CD45RO+ T cells but not in CD68+ monocytes/macrophages and EG2 or MBP+ eosinophils. The activation markers CD25 and HLA-DR were up-regulated in the tuberculin-injected sites. In situ hybridization was performed using 35S-labeled riboprobes for interleukin (IL)-2, interferon (IFN)-gamma, IL-4, and IL-5. After tuberculin injection, a preferential Th-1-type cytokine profile was observed with significant increases in the numbers of IL-2 and IFN-gamma mRNA-expressing cells. These results are similar to those reported after tuberculin-induced delayed-type hypersensitivity in humans, suggesting that this model might be useful to study cutaneous inflammatory reaction. Images Figure 4 PMID:9626072

Tuberculin-induced delayed-type hypersensitivity reaction in a model of hu-PBMC-SCID mice grafted with autologous skin.

PubMed

Tsicopoulos, A; Pestel, J; Fahy, O; Vorng, H; Vandenbusche, F; Porte, H; Eraldi, L; Wurtz, A; Akoum, H; Hamid, Q; Wallaert, B; Tonnel, A B

1998-06-01

We have developed an animal model to study human delayed-type hypersensitivity reactions. Previous studies in humans have shown after tuberculin injection the presence of a mononuclear cell infiltration, with almost no eosinophils, associated with a preferential Th-1-type cytokine profile. Human skin graft obtained from tuberculin-reactive donors was grafted onto the back of severe combined immunodeficient mice. After healing, mice were reconstituted intraperitoneally with peripheral mononuclear cells. Tuberculin and diluent were injected intradermally, and skin biopsies were performed 72 hours later. Skin grafts were divided into two parts, one for immunohistochemistry and one for in situ hybridization studies. Immunohistochemistry was performed on cryostat sections using the alkaline phosphatase anti-alkaline phosphatase technique. In the tuberculin-injected sites as compared with the diluent-injected sites, there were significant increases in the number of CD45+ pan leukocytes and CD4+, CD8+, CD45RO+ T cells but not in CD68+ monocytes/macrophages and EG2 or MBP+ eosinophils. The activation markers CD25 and HLA-DR were up-regulated in the tuberculin-injected sites. In situ hybridization was performed using 35S-labeled riboprobes for interleukin (IL)-2, interferon (IFN)-gamma, IL-4, and IL-5. After tuberculin injection, a preferential Th-1-type cytokine profile was observed with significant increases in the numbers of IL-2 and IFN-gamma mRNA-expressing cells. These results are similar to those reported after tuberculin-induced delayed-type hypersensitivity in humans, suggesting that this model might be useful to study cutaneous inflammatory reaction.

Efficacy of treat-and-extend regimen with aflibercept for pachychoroid neovasculopathy and Type 1 neovascular age-related macular degeneration.

PubMed

Matsumoto, Hidetaka; Hiroe, Takashi; Morimoto, Masahiro; Mimura, Kensuke; Ito, Arisa; Akiyama, Hideo

2018-03-01

To evaluate the efficacy of intravitreal aflibercept therapy using a treat-and-extend regimen on treatment-naïve pachychoroid neovasculopathy (PNV) and Type 1 neovascular age-related macular degeneration (AMD). We retrospectively studied 42 eyes with PNV and 60 eyes with Type 1 neovascular AMD. We assessed best-corrected visual acuity (BCVA), central macular thickness (CMT), central choroidal thickness (CCT), and total number of injections over 2 years. The BCVA and CMT improvements during the 2-year treatment period did not differ significantly between PNV and AMD; however, CCT decreased significantly in PNV than in AMD (P<0.05). Management of PNV required significantly fewer injections than AMD during the 2-year period (P<0.05). There were no significant differences in BCVA, CMT and CCT changes between PNV with and without polypoidal lesions (28 vs. 14 eyes) during the 2 year period. Significantly fewer injections were needed for PNV with polypoidal lesions than for PNV without (P<0.01). There were no significant differences in BCVA, CMT and CCT changes, or in the number of injections during the 2-year treatment period, between AMD with and without polypoidal lesions (30 vs. 30 eyes). Treat-and-extend regimen of intravitreal aflibercept injection may be equally effective in terms of improvement of BCVA and exudative changes both in eyes with PNV and those with Type 1 neovascular AMD requiring fewer injections for the former. Among eyes with PNV, those with polypoidal lesions needed fewer injections than those without polypoidal lesions.

TEST DESIGN FOR ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) OF ADD-ON NOX CONTROL UTILIZING OZONE INJECTION

EPA Science Inventory

The paper discusses the test design for environmental technology verification (ETV) of add-0n nitrogen oxides (NOx) control utilizing ozone injection. (NOTE: ETV is an EPA-established program to enhance domestic and international market acceptance of new or improved commercially...

Trends in stricture management among male Medicare beneficiaries: underuse of urethroplasty?

PubMed

Anger, Jennifer T; Buckley, Jill C; Santucci, Richard A; Elliott, Sean P; Saigal, Christopher S

2011-02-01

To analyze the trends in male urethral stricture management using the 1992-2001 Medicare claims data and to determine whether certain racial and ethnic groups have a disproportionate burden of urethral stricture disease. We analyzed the Medicare claims for fiscal years 1992, 1995, 1998, and 2001. The "International Classification of Disease, 9th revision," diagnosis codes were used to identify men with urethral stricture. The demographic characteristics assessed included patient age, race, and comorbidities, as measured using the Charlson index. Treatments were identified using the Physician Current Procedural Terminology Coding System, 4th edition, procedure codes and stratified into 4 treatment types: urethral dilation, direct vision internal urethrotomy, urethral stent/steroid injection, and urethroplasty. The overall rates of stricture diagnosis decreased from 10,088/100,000 population in 1992 to 6897 in 2001 (from 1.4% to 0.9%). The stricture prevalence was greatest among black and Hispanic men, although the urethroplasty rates were greatest among white men. Direct vision internal urethrotomy was the most common treatment, followed by urethral dilation, urethral stent/steroid injection, and urethroplasty. The urethroplasty rates remained stable, but quite low (0.6%-0.8%), during the study period. The overall rates of stricture diagnosis decreased from 1992 to 2001. Despite the poor overall efficacy of urethrotomy and urethral dilation relative to urethroplasty and despite the known complications of stent placement in this setting, the urethroplasty rates were the lowest of all treatments. Although we could not determine the treatment success with these data, these findings suggest an underuse of the most efficacious treatment of urethral stricture disease, urethroplasty. Copyright © 2011. Published by Elsevier Inc.

GABAergic control of food intake in the meat-type chickens.

PubMed

Jonaidi, H; Babapour, V; Denbow, D M

2002-08-01

This study examined the effects of intracerebroventricular injections of gamma-aminobutyric acid (GABA) agonists on short-term food intake in meat-type cockerels. In Experiment 1, birds were injected with various doses of muscimol, a GABA(A) agonist. In Experiment 2, the birds received bicuculline, a GABA(A) antagonist, prior to injection of muscimol. In Experiment 3, the effect of varying doses of baclofen, a GABA(B) agonist, on food intake was determined. The intracerebroventricular injection of muscimol caused a dose-dependent increase in food intake. This effect was significantly attenuated by pretreatment with bicuculline. Food intake was not affected by the intracerebroventricular injection of baclofen. These results suggest that GABA acts within the brain of broilers at a GABA(A), but not GABA(B), receptor to increase voluntary food intake.

Thermal reactor for afterburning automotive internal combustion engine exhaust gases

DOE Office of Scientific and Technical Information (OSTI.GOV)

Masaki, K.; Nagaishi, H.

1974-08-08

A thermal reactor for burning unburned components in exhaust gases of an internal combustion engine before emission to the atmosphere is described. An outer casing has an exhaust gas inlet connected to the exhaust ports, and an inner casing divides the reactor into an outer chamber and an inner chamber. The inner casing has an inlet from the outer chamber, an outlet to the atmosphere, and perforations opening to the outer chamber. An oxidation catalyst in the inner chamber promotes oxidation of the unburned components in the exhaust gases to generate oxidation reaction heat. A first secondary air injection nozzlemore » in the inner chamber between the oxidation catalyst and the outlet and a second secondary air injection nozzle in a portion upstream of the oxidation catalyst inject secondary air into oxidation catalyst.« less

Comparative study of the novel and conventional injection approach for inferior alveolar nerve block.

PubMed

Boonsiriseth, K; Sirintawat, N; Arunakul, K; Wongsirichat, N

2013-07-01

This study aimed to evaluate the efficacy of anesthesia obtained with a novel injection approach for inferior alveolar nerve block compared with the conventional injection approach. 40 patients in good health, randomly received each of two injection approaches of local anesthetic on each side of the mandible at two separate appointments. A sharp probe and an electric pulp tester were used to test anesthesia before injection, after injection when the patients' sensation changed, and 5 min after injection. This study comprised positive aspiration and intravascular injection 5% and neurovascular bundle injection 7.5% in the conventional inferior alveolar nerve block, but without occurrence in the novel injection approach. A visual analog scale (VAS) pain assessment was used during injection and surgery. The significance level used in the statistical analysis was p<0.05. For the novel injection approach compared with the conventional injection approach, no significant difference was found on the subjective onset, objective onset, operation time, duration of anesthesia and VAS pain score during operation, but the VAS pain score during injection was significantly different. The efficacy of inferior alveolar nerve block by the novel injection approach provided adequate anesthesia and caused less pain and greater safety during injection. Copyright © 2012 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Magnetic Helicity Injection and Thermal Transport

NASA Astrophysics Data System (ADS)

Moses, Ronald; Gerwin, Richard; Schoenberg, Kurt

1999-11-01

In magnetic helicity injection, a current is driven between electrodes, parallel to the magnetic field in the edge plasma of a machine.^1 Plasma instabilities distribute current throughout the plasma. To model the injection of magnetic helicity, K, into an arbitrary closed surface, K is defined as the volume integral of A^.B. To make K unique, a gauge is chosen where the tangential surface components of A are purely solenoidal. If magnetic fields within a plasma are time varying, yet undergo no macroscopic changes over an extended period, and if the plasma is subject to an Ohm’s law with Hall terms, then it is shown that no closed magnetic surfaces with sustained internal currents can exist continuously within the plasma.^2 It is also shown that parallel thermal transport connects all parts of the plasma to the helicity injection electrodes and requires the electrode voltage difference to be at least 2.5 to 3 times the peak plasma temperature. This ratio is almost independent of the length of the electron mean-free path. If magnetic helicity injection is to be used for fusion-grade plasmas, then high-voltage, high-impedance injection techniques must be developed. ^1T. R. Jarboe, Plasma Physics and Controlled Fusion, V36, 945-990 (June 1994). ^2R. W. Moses, 1991 Sherwood International Fusion Theory Conference, Seattle, WA (April 22-24, 1991).

Intradetrusor onabotulinumtoxinA injections for refractory neurogenic detrusor overactivity incontinence: do we need urodynamic investigation for outcome assessment?

PubMed

Koschorke, Miriam; Leitner, Lorenz; Sadri, Helen; Knüpfer, Stephanie C; Mehnert, Ulrich; Kessler, Thomas M

2017-12-01

To evaluate if urinary continence in patients with refractory neurogenic detrusor overactivity (NDO) incontinence after intradetrusor onabotulinumtoxinA injections is sufficient for appropriate outcome assessment or if urodynamic investigation (UDI) is needed. A consecutive series of 148 patients undergoing intradetrusor onabotulinumtoxinA injections for refractory NDO incontinence were prospectively evaluated. Patients underwent UDI before and at 6 weeks after onabotulinumtoxinA injections. The primary outcome was the prevalence of maximum storage detrusor pressure (Pdet max storage) of >40 cmH 2 O in continent patients at 6 weeks after treatment. The secondary outcomes were treatment effects on other clinical and video-urodynamic variables. At 6 weeks after intradetrusor onabotulinumtoxinA injections, 98 of the 148 patients (66%) with NDO incontinence were continent. Of these patients, 18 (18%, confidence interval 12-27%) had a Pdet max storage of >40 cmH 2 O. Gender, underlying neurological disorder, and high Pdet max storage before treatment appear to increase the risk of poor urodynamic outcomes. Urinary continence is not sufficient for outcome assessment after intradetrusor onabotulinumtoxinA injections, as high intravesical pressures threatening the upper urinary tract may be missed in a relevant proportion of continent patients. Therefore, we strongly recommend UDI as a routine part of the follow-up. © 2017 The Authors BJU International © 2017 BJU International Published by John Wiley & Sons Ltd.

Double-lumen catheter in the right jugular vein induces two sub-endothelial abscesses in an unusual place, the transition between the superior vena cava and the right atrium: a case report

PubMed Central

2014-01-01

Endocarditis is a type of infection that is common in internal medicine wards and in haemodialysis clinics. The location that is most affected are the heart valves. Herein, we report a case of an uncommon abscess, a sub-endothelial abscess between the transition of the superior vena cava and the right atrium. There were several emboli to the lung and foot, and the agent was related to Staphylococcus aureus and a double-lumen catheter. Usually, this type of abscess is located in valves, either the tricuspid valve if related to catheters or injection drug use or the mitral valve if related to other causes. An exhaustive review was made, but we found no information about the location of this abscess and the rarity of the event motivating the report of infection. PMID:25110520

CFD simulation of vertical linear motion mixing in anaerobic digester tanks.

PubMed

Meroney, Robert N; Sheker, Robert E

2014-09-01

Computational fluid dynamics (CFD) was used to simulate the mixing characteristics of a small circular anaerobic digester tank (diameter 6 m) equipped sequentially with 13 different plunger type vertical linear motion mixers and two different type internal draft-tube mixers. Rates of mixing of step injection of tracers were calculated from which active volume (AV) and hydraulic retention time (HRT) could be calculated. Washout characteristics were compared to analytic formulae to estimate any presence of partial mixing, dead volume, short-circuiting, or piston flow. Active volumes were also estimated based on tank regions that exceeded minimum velocity criteria. The mixers were ranked based on an ad hoc criteria related to the ratio of AV to unit power (UP) or AV/UP. The best plunger mixers were found to behave about the same as the conventional draft-tube mixers of similar UP.

Resin Viscosity Influence on Fiber Compaction in Tapered Resin Injection Pultrusion Manufacturing

NASA Astrophysics Data System (ADS)

Masuram, N. B.; Roux, J. A.; Jeswani, A. L.

2018-06-01

Viscosity of the liquid resin effects the chemical and mechanical properties of the pultruded composite. In resin injection pultrusion manufacturing the liquid resin is injected into a specially designed tapered injection chamber through the injection slots present on top and bottom of the chamber. The resin is injected at a pressure so as to completely wetout the fiber reinforcements inside the tapered injection chamber. As the resin penetrates through the fibers, the resin also pushes the fibers away from the wall towards the center of chamber causing compaction of the fiber reinforcements. The fibers are squeezed together due to compaction, making resin penetration more difficult; thus higher resin injection pressures are required to efficaciously penetrate through the compacted fibers and achieve complete wetout. The impact of resin viscosity on resin flow, fiber compaction, wetout and on the final product is further discussed. Injection chamber design predominantly effects the resin flow inside the chamber and the minimum injection pressure required to completely wet the fibers. Therefore, a desirable injection chamber design is such that wetout occurs at lower injection pressures and at low internal pressures inside the injection chamber.

Resin Viscosity Influence on Fiber Compaction in Tapered Resin Injection Pultrusion Manufacturing

NASA Astrophysics Data System (ADS)

Masuram, N. B.; Roux, J. A.; Jeswani, A. L.

2017-08-01

Viscosity of the liquid resin effects the chemical and mechanical properties of the pultruded composite. In resin injection pultrusion manufacturing the liquid resin is injected into a specially designed tapered injection chamber through the injection slots present on top and bottom of the chamber. The resin is injected at a pressure so as to completely wetout the fiber reinforcements inside the tapered injection chamber. As the resin penetrates through the fibers, the resin also pushes the fibers away from the wall towards the center of chamber causing compaction of the fiber reinforcements. The fibers are squeezed together due to compaction, making resin penetration more difficult; thus higher resin injection pressures are required to efficaciously penetrate through the compacted fibers and achieve complete wetout. The impact of resin viscosity on resin flow, fiber compaction, wetout and on the final product is further discussed. Injection chamber design predominantly effects the resin flow inside the chamber and the minimum injection pressure required to completely wet the fibers. Therefore, a desirable injection chamber design is such that wetout occurs at lower injection pressures and at low internal pressures inside the injection chamber.

Longitudinal Phonatory Characteristics after Botulinum Toxin Type A Injection.

ERIC Educational Resources Information Center

Fisher, Kimberly V.; And Others

1996-01-01

A study investigated the long-term effects of a Botulinum Toxin Type A injection on the glottal competency of a man with adductor spasmodic dysphonia. Results suggest that change in degree of glottal adduction over time can be observed even when vocal instability is present within each recording session. (CR)

Sentinel Lymph Node (SLN) laparoscopic assessment early stage in endometrial cancer.

PubMed

Gargiulo, T; Giusti, M; Bottero, A; Leo, L; Brokaj, L; Armellino, F; Palladin, L

2003-06-01

The aim of the study was to demonstrate the validity of sentinel lymph node (SLN) detection after injection of radioactive isotope and patent blue dye in patients affected by early stage endometrial cancer. The second purpose was to compare radioactive isotope and patent blue dye migration. Between September 2000 and May 2001, 11 patients with endometrial cancer FIGO stage Ib (n=10) and IIa (n=1) underwent laparoscopic SLN detection during laparoscopic assisted vaginal hysterectomy with bilateral salpingo-oophorectomy and pelvic bilateral systematic lymphadenectomy. Radioactive isotope injection was performed 24 ours before surgery and blue dye injection was performed just before surgery in the cervix at 3, 6, 9 and 12 hours. A 350 mm laparoscopic gamma-scintiprobe MR 100 type 11, (99m)Tc setted (Pol.Hi.Tech.), was used intraoperatively for detecting SLN. Seventeen SLN were detected at lymphoscintigraphy (6 bilateral and 5 monolateral). At laparoscopic surgery the same locations were found belonging at internal iliac lymph nodes (the so called "Leveuf-Godard" area, lateral to the inferior vescical artery, ventral to the origin of uterine artery and medial or caudal to the external iliac vein). Fourteen SLN were negative at histological analysis and only 3 positive for micrometastasis (mean SLN sections = 60. All the other pelvic lymph nodes were negative at histological analysis. The same SLN locations detected with g-scintiprobe were observed during laparoscopy after patent blue dye injection. If the sensitivity of the assessment of SLN is confirmed to be 100%, this laparoscopic approach could change the management of early stage endometrial cancer. The clinical validity of this technique must be evaluated prospectively.

Message communications of particular message types between compute nodes using DMA shadow buffers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blocksome, Michael A.; Parker, Jeffrey J.

Message communications of particular message types between compute nodes using DMA shadow buffers includes: receiving a buffer identifier specifying an application buffer having a message of a particular type for transmission to a target compute node through a network; selecting one of a plurality of shadow buffers for a DMA engine on the compute node for storing the message, each shadow buffer corresponding to a slot of an injection FIFO buffer maintained by the DMA engine; storing the message in the selected shadow buffer; creating a data descriptor for the message stored in the selected shadow buffer; injecting the datamore » descriptor into the slot of the injection FIFO buffer corresponding to the selected shadow buffer; selecting the data descriptor from the injection FIFO buffer; and transmitting the message specified by the selected data descriptor through the data communications network to the target compute node.« less

Influence of botulinum toxin on rabbit jaw muscle activity and anatomy.

PubMed

Korfage, J A M; Wang, Jeffrey; Lie, S H J T J; Langenbach, Geerling E J

2012-05-01

Muscles can adapt their fiber properties to accommodate to new conditions. We investigated the extent to which a decrease in muscle activation can cause an adaptation of fiber properties in synergistic and antagonistic jaw muscles. Three months after the injection of botulinum toxin type A in one masseter (anterior or posterior) muscle changes in fiber type composition and fiber cross-sectional areas in jaw muscles were studied at the microscopic level. The injected masseter showed a steep increase in myosin type IIX fibers, whereas fast fibers decreased by about 50% in size. Depending on the injection site, both synergistic and antagonistic muscles showed a significant increase in the size of their fast IIA fibers, sometimes combined with an increased number of IIX fibers. Silencing the activity in the masseter not only causes changes in the fibers of the injected muscle but also leads to changes in other jaw muscles. Copyright © 2012 Wiley Periodicals, Inc.

Immunotherapy using regulatory T cells in cancer suggests more flavors of hypersensitivity type IV.

PubMed

Pakravan, Nafiseh; Hassan, Zuhair Mohammad

2018-03-01

Regulatory T cells (Tregs) profoundly affect tumor microenvironment and exert dominant suppression over antitumor immunity in response to self-antigen expressed by tumor. Immunotherapy targeting Tregs lead to a significant improvement in antitumor immunity. Intradermal injection of tumor antigen results in negative delayed-type hypersensitivity (DTH) type IV. However, anti-Tregs treatment/use of adjuvant along with tumor antigens turns DTH to positive. Considering Tregs as the earliest tumor sensor/responders, tumor can be regarded as Treg-mediated type IV hypersensitivity and negative DTH to tumor antigen is due to anti-inflammatory action of Tregs to tumor antigens at the injection site. Such a view would help us in basic and clinical situations to testify a candidate vaccine via dermal administration and evaluation of Treg proportion at injection site.

Biological effects of {sup 137}CsCl injected in beagle dogs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nikula, K.J.; Muggenburg, B.A.; Griffith, W.C.

The toxicity of intravenously administered {sup 137}CsCl in the beagle dog was investigated as part of a program to evaluate the biological effects of internally deposited fission-product radionuclides. The intravenous route of exposure was chosen for simplicity and accuracy because it was known that after intravenous injection, inhalation or ingestion, internally deposited {sup 137}CsCl is rapidly absorbed and distributed throughout the body, exposing the whole body to {beta}-particle and {gamma} radiations. Fifty-four dogs were injected intravenously with {sup 137}Cs to provide one group of six dogs with mean initial body burdens of 141 MBq {sup 137}Cs/kg body mass and fourmore » groups of 12 dogs each with mean initial body burdens of 104, 72, 52 and 36 MBq {sup 137}Cs/kg. Twelve dogs were injected with isotonic saline as study controls. Because the number of study controls dogs was small, data from an additional 49 control dogs from other studies at the Inhalation Toxicology Research Institute that were performed over a similar span of years were also used. There was a significant, dose-dependent decrease in survival of the {sup 137}Cs-injected dogs. Eleven {sup 137}Cs-injected dogs, including all six in the highest initial body burden group, died within 81 days after injection, primarily due to hematopoietic cell damage resulting in severe pancytopenia. An additional 25 dogs had transient hematological dyscrasia but survived for long times. All {sup 137}Cs-injected male dogs had marked damage to the germinal epithelium of the testicular seminiferous tubules with azoospermia in the long-term survivors. benign and malignant neoplasms occurred in a variety of organs in {sup 137}Cs-injected dogs, rather than in a single target organ. When individual organs were considered, the incidence of malignant neoplasms was increased in the liver and in the nasal cavity and paranasal sinuses of the {sup 137}Cs-injected dogs. 34 refs., 6 figs., 6 tabs.« less

Design Enhancements of the Two-Dimensional, Dual Throat Fluidic Thrust Vectoring Nozzle Concept

NASA Technical Reports Server (NTRS)

Flamm, Jeffrey D.; Deere, Karen A.; Mason, Mary L.; Berrier, Bobby L.; Johnson, Stuart K.

2006-01-01

A Dual Throat Nozzle fluidic thrust vectoring technique that achieves higher thrust-vectoring efficiencies than other fluidic techniques, without sacrificing thrust efficiency has been developed at NASA Langley Research Center. The nozzle concept was designed with the aid of the structured-grid, Reynolds-averaged Navier-Stokes computational fluidic dynamics code PAB3D. This new concept combines the thrust efficiency of sonic-plane skewing with increased thrust-vectoring efficiencies obtained by maximizing pressure differentials in a separated cavity located downstream of the nozzle throat. By injecting secondary flow asymmetrically at the upstream minimum area, a new aerodynamic minimum area is formed downstream of the geometric minimum and the sonic line is skewed, thus vectoring the exhaust flow. The nozzle was tested in the NASA Langley Research Center Jet Exit Test Facility. Internal nozzle performance characteristics were defined for nozzle pressure ratios up to 10, with a range of secondary injection flow rates up to 10 percent of the primary flow rate. Most of the data included in this paper shows the effect of secondary injection rate at a nozzle pressure ratio of 4. The effects of modifying cavity divergence angle, convergence angle and cavity shape on internal nozzle performance were investigated, as were effects of injection geometry, hole or slot. In agreement with computationally predicted data, experimental data verified that decreasing cavity divergence angle had a negative impact and increasing cavity convergence angle had a positive impact on thrust vector angle and thrust efficiency. A curved cavity apex provided improved thrust ratios at some injection rates. However, overall nozzle performance suffered with no secondary injection. Injection holes were more efficient than the injection slot over the range of injection rates, but the slot generated larger thrust vector angles for injection rates less than 4 percent of the primary flow rate.

Alleviation of efficiency droop in InGaN/GaN multiple quantum well light-emitting diodes with trapezoidal quantum barriers

NASA Astrophysics Data System (ADS)

Kim, Sang-Jo; Lee, Kwang Jae; Park, Seong-Ju

2018-06-01

We numerically investigated the effects of trapezoidal quantum barriers (QBs) on efficiency droop in InGaN/GaN multiple quantum well (MQW) light-emitting diodes (LEDs). Simulations showed that the electrostatic field in QWs of LEDs with trapezoidal barriers is reduced because of the reduced sheet charge density at the QW-QB interface caused by the thin GaN layer in trapezoidal QBs. Additionally, the InGaN grading region in trapezoidal QBs suppresses hot carrier transport and this enhances efficient carrier injection into the QWs. The electroluminescence intensity of an LED with trapezoidal QBs is increased by 10.2% and 6.7% at 245 A cm‑2 when compared with the intensities of LEDs with square-type GaN barriers and multilayer barriers, respectively. The internal quantum efficiency (IQE) droop of an LED with trapezoidal QBs is 16% at 300 A cm‑2, while LEDs with square-type GaN barriers and multilayer barriers have IQE droop of 31% and 24%, respectively. This IQE droop alleviation in LEDs with trapezoidal QBs is attributed to the reduced energy band bending, efficient hole injection, and more uniform hole distribution in the MQWs that results from reduction of the piezoelectric field by the trapezoidal QBs. These results indicate that the trapezoidal QB in MQWs is promising for enhanced efficiency in high-power GaN-based LEDs.

Cross-border drug injection relationships among injection drug users in Tijuana, Mexico

PubMed Central

Wagner, Karla D.; Pollini, Robin A.; Patterson, Thomas L.; Lozada, Remedios; Ojeda, Victoria D.; Brouwer, Kimberly C.; Vera, Alicia; Volkmann, Tyson A.; Strathdee, Steffanie A.

2010-01-01

Background International borders are unique social and environmental contexts characterized by high levels of mobility. Among drug users, mobility increases risk for human immunodeficiency virus (HIV) in part through its effects on the social environment. However, the social dynamics of drug users living in border regions are understudied. Methods 1056 injection drug users (IDUs) residing in Tijuana, Mexico were recruited using respondent-driven sampling (RDS) from 2006 to 2007, and underwent surveys and testing for HIV, syphilis, and tuberculosis (TB). Using logistic regression on baseline data, we identified correlates of having ever injected drugs with someone from the US. Results Almost half (48%) reported ever injecting drugs with someone from the US. In RDS-adjusted logistic regression, factors independently associated with having ever injected with someone from the US included: having greater than middle school education (Adjusted Odds Ratio [AOR] 2.91; 95% Confidence Interval [C.I.] 1.52, 5.91), speaking English (AOR 3.24, 95% C.I. 1.96, 5.36), age (AOR 1.10 per year; 95% C.I. 1.07, 1.14), age at initiation of injection drug use (AOR 0.90 per year; 95% C.I. 0.86, 0.94), homelessness (AOR 2.61; 95% C.I. 1.27, 5.39), and having ever been incarcerated (AOR 11.82; 95% C.I., 5.22, 26.77). No associations with HIV, syphilis, TB, drug use, or injection risk behavior were detected. Conclusion Findings suggest that IDU networks in Mexico and the US may transcend international borders, with implications for cross-border transmission of infectious disease. Binational programs and policies need to consider the structure and geographic distribution of drug using networks. PMID:20889270

Controlled CO2 injection into a shallow aquifer and leakage detection monitoring practices at the K-COSEM site, Korea

NASA Astrophysics Data System (ADS)

Lee, S. S.; Joun, W.; Ju, Y. J.; Ha, S. W.; Jun, S. C.; Lee, K. K.

2017-12-01

Artificial carbon dioxide injection into a shallow aquifer system was performed with two injection types imitating short- and long-term CO2 leakage events into a shallow aquifer. One is pulse type leakage of CO2 (6 hours) under a natural hydraulic gradient (0.02) and the other is long-term continuous injection (30 days) under a forced hydraulic gradient (0.2). Injection and monitoring tests were performed at the K-COSEM site in Eumseong, Korea where a specially designed well field had been installed for artificial CO2 release tests. CO2-infused and tracer gases dissolved groundwater was injected through a well below groundwater table and monitoring were conducted in both saturated and unsaturated zones. Real-time monitoring data on CO2 concentration and hydrochemical parameters, and periodical measurements of several gas tracers (He, Ar, Kr, SF6) were obtained. The pulse type short-term injection test was carried out prior to the long-term injection test. Results of the short-term injection test, under natural hydraulic gradient, showed that CO2 plume migrated along the preferential pathway identified through hydraulic interference tests. On the other hand, results of the long-term injection test indicated the CO2 plume migration path was aligned to the forced hydraulic gradient. Compared to the short-term test, the long-term injection formed detectable CO2 concentration change in unsaturated wellbores. Recovery data of tracer gases made breakthrough curves compatible to numerical simulation results. The monitoring results indicated that detection of CO2 leakage into groundwater was more effectively performed by using a pumping and monitoring method in order to capture by-passing plume. With this concept, an effective real-time monitoring method was proposed. Acknowledgement: Financial support was provided by the "R&D Project on Environmental Management of Geologic CO2storage" from the KEITI (Project number : 2014001810003)

Some Factors Affecting the Reproducibility of Penetration and the Cut-Off of Oil Sprays for Fuel-injection Engines

NASA Technical Reports Server (NTRS)

Beardsley, E G

1928-01-01

This investigation was undertaken at the Langley Memorial Aeronautical Laboratory in connection with a general research on fuel-injection for aircraft. The purpose of the investigation was to determine the factors controlling the reproducibility of spray penetration and secondary discharges after cut-off. The development of single sprays from automatic injection valves was recorded by means of special high-speed photographic apparatus capable of taking 25 consecutive pictures of the moving spray at a rate of 4,000 per second. The effect of two types of injection valves, injection-valve tube length, initial pressure in the injection-valve tube, speed of the injection control mechanism, and time of spray cut-off, on the reproducibility of spray penetration, and on secondary discharges were investigated. It was found that neither type of injection valve materially affected spray reproducibility. The initial pressure in the injection-valve tube controlled the reproducibility of spray penetrations. An increase in the initial pressure or in the length of the injection-valve tube slightly increased the spray penetration within the limits of this investigation. The speed of the injection-control mechanism did not affect the penetration. Analysis of the results indicates that secondary discharges were caused in this apparatus by pressure waves initiated by the rapid opening of the cut-off valve. The secondary discharges were eliminated in this investigation by increasing the length of the injection-valve tube. (author)

Basics of Sterile Compounding: Particulate Matter.

PubMed

Akers, Michael J

2017-01-01

This article focuses on the requirements for particulate matter in sterile products. Topics include particles and quality, particulate matter standards (large- and small-volume injectables), development of the small-volume injectable test, electronic (light obscuration) and microscope testing, and special requirements for particulate matter in biopharmaceutical preparations. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

PIV measurement of internal structure of diesel fuel spray

NASA Astrophysics Data System (ADS)

Cao, Z.-M.; Nishino, K.; Mizuno, S.; Torii, K.

2000-12-01

This paper reports particle image velocimetry (PIV) measurements of diesel fuel spray injected from a single-hole nozzle at injection pressures ranging from 30 to 70MPa, which are comparable to partial-load operating conditions of commercial diesel engines. The fuel is injected into a non-combusting environment pressurized up to 2.0MPa. A laser-induced fluorescent (LIF) technique is utilized to visualize internal structures of fuel sprays formed by densely-distributing droplets. A specially designed synchronization system is developed to acquire double-frame spray images at an arbitrary time delay after injection. A direct cross-correlation PIV technique is applied to measure instantaneous droplet velocity distribution. Unique large-scale structures in droplet concentration, called `branch-like structures' by Azetsu etal. (1990), are observed and shown to be associated with active vortical motions, which appear to be responsible for the mixing between droplets and the surrounding gas. It is found that the droplets tend to move out of the vortical structures and accumulate in the regions of low vorticity. Some other interesting features concerning droplet velocity fields are also presented.

PIV measurement of internal structure of diesel fuel spray

NASA Astrophysics Data System (ADS)

Cao, Z.-M.; Nishino, K.; Mizuno, S.; Torii, K.

This paper reports particle image velocimetry (PIV) measurements of diesel fuel spray injected from a single-hole nozzle at injection pressures ranging from 30 to 70MPa, which are comparable to partial-load operating conditions of commercial diesel engines. The fuel is injected into a non-combusting environment pressurized up to 2.0MPa. A laser-induced fluorescent (LIF) technique is utilized to visualize internal structures of fuel sprays formed by densely-distributing droplets. A specially designed synchronization system is developed to acquire double-frame spray images at an arbitrary time delay after injection. A direct cross-correlation PIV technique is applied to measure instantaneous droplet velocity distribution. Unique large-scale structures in droplet concentration, called `branch-like structures' by Azetsu etal. (1990), are observed and shown to be associated with active vortical motions, which appear to be responsible for the mixing between droplets and the surrounding gas. It is found that the droplets tend to move out of the vortical structures and accumulate in the regions of low vorticity. Some other interesting features concerning droplet velocity fields are also presented.

Injection system used into SI engines for complete combustion and reduction of exhaust emissions in the case of alcohol and petrol alcohol mixtures feed

NASA Astrophysics Data System (ADS)

Ispas, N.; Cofaru, C.; Aleonte, M.

2017-10-01

Internal combustion engines still play a major role in today transportation but increasing the fuel efficiency and decreasing chemical emissions remain a great goal of the researchers. Direct injection and air assisted injection system can improve combustion and can reduce the concentration of the exhaust gas pollutes. Advanced air-to-fuel and combustion air-to-fuel injection system for mixtures, derivatives and alcohol gasoline blends represent a major asset in reducing pollutant emissions and controlling combustion processes in spark-ignition engines. The use of these biofuel and biofuel blending systems for gasoline results in better control of spark ignition engine processes, making combustion as complete as possible, as well as lower levels of concentrations of pollutants in exhaust gases. The main purpose of this paper was to provide most suitable tools for ensure the proven increase in the efficiency of spark ignition engines, making them more environmentally friendly. The conclusions of the paper allow to highlight the paths leading to a better use of alcohols (biofuels) in internal combustion engines of modern transport units.

Changes in numbers and types of mast cell colony-forming cells in the peritoneal cavity of mice after injection of distilled water: evidence that mast cells suppress differentiation of bone marrow-derived precursors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kanakura, Y.; Kuriu, A.; Waki, N.

Two different types of cells in the peritoneal cavity of mice produce mast cell colonies in methylcellulose. Large mast cell colonies are produced by bone marrow-derived precursors resembling lymphoid cells by light microscopy (L-CFU-Mast), whereas medium and small mast cell colonies are produced by morphologically identifiable mast cells (M-CFU-Mast and S-CFU-Mast, respectively). In the present study we eradicated peritoneal mast cells by intraperitoneal (IP) injection of distilled water. The regeneration process was investigated to clarify the relationship between L-CFU-Mast, M-CFU-Mast, and S-CFU-Mast. After injection of distilled water, M-CFU-Mast and S-CFU-Mast disappeared, but L-CFU-Mast increased, and then M-CFU-Mast and S-CFU-Mast appeared,more » suggesting the presence of a hierarchic relationship. When purified peritoneal mast cells were injected two days after the water injection, the L-CFU-Mast did not increase. In the peritoneal cavity of WBB6F1-+/+ mice that had been lethally irradiated and rescued by bone marrow cells of C57BL/6-bgJ/bgJ (beige, Chediak-Higashi syndrome) mice, L-CFU-Mast were of bgJ/bgJ type, but M-CFU-Mast and S-CFU-Mast were of +/+ type. The injection of distilled water to the radiation chimeras resulted in the development of bgJ/bgJ-type M-CFU-Mast and then S-CFU-Mast. The presence of mast cells appeared to suppress the recruitment of L-CFU-Mast from the bloodstream and to inhibit the differentiation of L-CFU-Mast to M-CFU-Mast.« less

Systemic immunological tolerance to ocular antigens is mediated by TRAIL-expressing CD8+ T cells.

PubMed

Griffith, Thomas S; Brincks, Erik L; Gurung, Prajwal; Kucaba, Tamara A; Ferguson, Thomas A

2011-01-15

Systemic immunological tolerance to Ag encountered in the eye restricts the formation of potentially damaging immune responses that would otherwise be initiated at other anatomical locations. We previously demonstrated that tolerance to Ag administered via the anterior chamber (AC) of the eye required Fas ligand-mediated apoptotic death of inflammatory cells that enter the eye in response to the antigenic challenge. Moreover, the systemic tolerance induced after AC injection of Ag was mediated by CD8(+) regulatory T cells. This study examined the mechanism by which these CD8(+) regulatory T cells mediate tolerance after AC injection of Ag. AC injection of Ag did not prime CD4(+) T cells and led to increased TRAIL expression by splenic CD8(+) T cells. Unlike wild-type mice, Trail(-/-) or Dr5(-/-) mice did not develop tolerance to Ag injected into the eye, even though responding lymphocytes underwent apoptosis in the AC of the eyes of these mice. CD8(+) T cells from Trail(-/-) mice that were first injected via the AC with Ag were unable to transfer tolerance to naive recipient wild-type mice, but CD8(+) T cells from AC-injected wild-type or Dr5(-/-) mice could transfer tolerance. Importantly, the transferred wild-type (Trail(+/+)) CD8(+) T cells were also able to decrease the number of infiltrating inflammatory cells into the eye; however, Trail(-/-) CD8(+) T cells were unable to limit the inflammatory cell ingress. Together, our data suggest that "helpless" CD8(+) regulatory T cells generated after AC injection of Ag enforce systemic tolerance in a TRAIL-dependent manner to inhibit inflammation in the eye.

Apparatus and method to inject a reductant into an exhaust gas feedstream

DOEpatents

Viola, Michael B [Macomb Township, MI

2009-09-22

An exhaust aftertreatment system for an internal combustion engine is provided including an apparatus and method to inject a reductant into the exhaust gas feedstream. Included is a fuel metering device adapted to inject reductant into the exhaust gas feedstream and a controllable pressure regulating device. A control module is operatively connected to the reductant metering device and the controllable pressure regulating device, and, adapted to effect flow of reductant into the exhaust gas feedstream over a controllable flow range.

Association of Insulin Pump Therapy vs Insulin Injection Therapy With Severe Hypoglycemia, Ketoacidosis, and Glycemic Control Among Children, Adolescents, and Young Adults With Type 1 Diabetes.

PubMed

Karges, Beate; Schwandt, Anke; Heidtmann, Bettina; Kordonouri, Olga; Binder, Elisabeth; Schierloh, Ulrike; Boettcher, Claudia; Kapellen, Thomas; Rosenbauer, Joachim; Holl, Reinhard W

2017-10-10

Insulin pump therapy may improve metabolic control in young patients with type 1 diabetes, but the association with short-term diabetes complications is unclear. To determine whether rates of severe hypoglycemia and diabetic ketoacidosis are lower with insulin pump therapy compared with insulin injection therapy in children, adolescents, and young adults with type 1 diabetes. Population-based cohort study conducted between January 2011 and December 2015 in 446 diabetes centers participating in the Diabetes Prospective Follow-up Initiative in Germany, Austria, and Luxembourg. Patients with type 1 diabetes younger than 20 years and diabetes duration of more than 1 year were identified. Propensity score matching and inverse probability of treatment weighting analyses with age, sex, diabetes duration, migration background (defined as place of birth outside of Germany or Austria), body mass index, and glycated hemoglobin as covariates were used to account for relevant confounders. Type 1 diabetes treated with insulin pump therapy or with multiple (≥4) daily insulin injections. Primary outcomes were rates of severe hypoglycemia and diabetic ketoacidosis during the most recent treatment year. Secondary outcomes included glycated hemoglobin levels, insulin dose, and body mass index. Of 30 579 patients (mean age, 14.1 years [SD, 4.0]; 53% male), 14 119 used pump therapy (median duration, 3.7 years) and 16 460 used insulin injections (median duration, 3.6 years). Patients using pump therapy (n = 9814) were matched with 9814 patients using injection therapy. Pump therapy, compared with injection therapy, was associated with lower rates of severe hypoglycemia (9.55 vs 13.97 per 100 patient-years; difference, -4.42 [95% CI, -6.15 to -2.69]; P < .001) and diabetic ketoacidosis (3.64 vs 4.26 per 100 patient-years; difference, -0.63 [95% CI, -1.24 to -0.02]; P = .04). Glycated hemoglobin levels were lower with pump therapy than with injection therapy (8.04% vs 8.22%; difference, -0.18 [95% CI, -0.22 to -0.13], P < .001). Total daily insulin doses were lower for pump therapy compared with injection therapy (0.84 U/kg vs 0.98 U/kg; difference, -0.14 [-0.15 to -0.13], P < .001). There was no significant difference in body mass index between both treatment regimens. Similar results were obtained after propensity score inverse probability of treatment weighting analyses in the entire cohort. Among young patients with type 1 diabetes, insulin pump therapy, compared with insulin injection therapy, was associated with lower risks of severe hypoglycemia and diabetic ketoacidosis and with better glycemic control during the most recent year of therapy. These findings provide evidence for improved clinical outcomes associated with insulin pump therapy compared with injection therapy in children, adolescents, and young adults with type 1 diabetes.

Differential induction and spread of tau pathology in young PS19 tau transgenic mice following intracerebral injections of pathological tau from Alzheimer’s disease or corticobasal degeneration brains

PubMed Central

Boluda, Susana; Iba, Michiyo; Zhang, Bin; Raible, Kevin M.; Lee, Virginia M-Y.; Trojanowski, John Q.

2015-01-01

Filamentous tau pathologies are hallmark lesions of several neurodegenerative tauopathies including Alzheimer’s disease (AD) and corticobasal degeneration (CBD) which show cell type-specific and topographically distinct tau inclusions. Growing evidence supports templated transmission of tauopathies through functionally interconnected neuroanatomical pathways suggesting that different self-propagating strains of pathological tau could account for the diverse manifestations of neurodegenerative tauopathies. Here, we describe the rapid and distinct cell type-specific spread of pathological tau following intracerebral injections of CBD or AD brain extracts enriched in pathological tau (designated CBD-Tau and AD-Tau, respectively) in young human mutant P301S tau transgenic (Tg) mice (line PS19) ~6–9 months before they show onset of mutant tau transgene-induced tau pathology. At 1 month post-injection of CBD-Tau, tau inclusions developed predominantly in oligodendrocytes of the fimbria and white matter near the injection sites with infrequent intraneuronal tau aggregates. In contrast, injections of AD-Tau in young PS19 mice induced tau pathology predominantly in neuronal perikarya with little or no oligodendrocyte involvement 1 month post-injection. With longer post-injection survival intervals of up to 6 months, CBD-Tau- and AD-Tau-induced tau pathology spread to different brain regions distant from the injection sites while maintaining the cell type-specific pattern noted above. Finally, CA3 neuron loss was detected 3 months post-injection of AD-Tau but not CBD-Tau. Thus, AD-Tau and CBD-Tau represent specific pathological tau strains that spread differentially and may underlie distinct clinical and pathological features of these two tauopathies. Hence, these strains could become targets to develop disease-modifying therapies for CBD and AD. PMID:25534024

Botulinum toxin in parkinsonism: The when, how, and which for botulinum toxin injections.

PubMed

Cardoso, Francisco

2018-06-01

The aim of this article is to provide a review of the use of injections of botulinum toxin in the management of selected symptoms and signs of Parkinson's disease and other forms of parkinsonism. Sialorrhea is defined as inability to control oral secretions, resulting in excessive saliva in the oropharynx. There is a high level of evidence for the treatment of sialorrhea in parkinsonism with injections of different forms of botulinum toxin type A as well as botulinum toxin type B. Tremor can be improved by the use of botulinum toxin injections but improved tremor control often leads to concomitant motor weakness, limiting its use. Levodopa induced dyskinesias are difficult to treat with botulinum toxin injections because of their variable frequency and direction. Apraxia of eyelid opening, a sign more commonly seen in progressive supranuclear palsy and other tauopathies, often improves after botulinum toxin injections. Recent data suggest that regardless of the underlying mechanism, pain in parkinsonism can be alleviated by botulinum toxin injections. Finally, freezing of gait, camptocormia and Pisa syndrome in parkinsonism almost invariably fail to respond to botulinum toxin injections. Copyright © 2017 Elsevier Ltd. All rights reserved.

The collective gyration of a heavy ion cloud in a magnetized plasma

NASA Technical Reports Server (NTRS)

Brenning, N.; Swenson, C.; Kelley, M. C.; Providakes, J.; Torbert, R.

1990-01-01

In both the ionospheric barium injection experiments CRIT 1 and CRIT 2, a long duration oscillation was seen with a frequency close to the gyro frequency of barium and a time duration of about one second. A model for the phenomena which was proposed for the CRIT 1 experiment is compared to the results from CRIT 2 which made a much more complete set of measurements. The model follows the motion of a low Beta ion cloud through a larger ambient plasma. The internal field of the model is close to antiparallel to the injection direction v sub i but slightly tilted towards the self polarization direction E sub p = -V sub i by B. As the ions move across the magnetic field, the space charge is continuously neutralized by magnetic field aligned electron currents from the ambient ionosphere, drawn by the divergence in the perpendicular electric field. These currents give a perturbation of the magnetic field related to the electric field perturbation by Delta E/Delta B approximately equal to V sub A. The model predictions agree quite well with the observed vector directions, field strengths, and decay times of the electric and magnetic fields in CRIT 2. The possibility to extend the model to the active region, where the ions are produces in this type of self-ionizing injection experiments, is discussed.

Mixing due Pulsating Turbulent Jets

NASA Astrophysics Data System (ADS)

Grosshans, Holger; Nygård, Alexander; Fuchs, Laszlo

Combustion efficiency and the formation of soot and/or NOx in Internal- Combustion engines depends strongly on the local air/fuel mixture, the local flow conditions and temperature. Modern diesel engines employ high injection pressure for improved atomization, but mixing is controlled largely by the flow in the cylinder. By injecting the fuel in pulses one can gain control over the atomization, evaporation and the mixing of the gaseous fuel. We show that the pulsatile injection of fuel enhances fuel break-up and the entrainment of ambient air into the fuel stream. The entrainment level depends on fuel property, such as fuel/air viscosity and density ratio, fuel surface-tension, injection speed and injection sequencing. Examples of enhanced break-up and mixing are given.

Supersonic Pulsed Injection

NASA Technical Reports Server (NTRS)

Cutler, A. D.; Harding, G. C.; Diskin, G. S.

2001-01-01

An injector has been developed to provide high-speed high-frequency (order 10 kHz) pulsed a supersonic crossflow. The injector nozzle is formed between the fixed internal surface of the nozzle and a freely rotating three- or four-sided wheel embedded within the device. Flow-induced rotation of the wheel causes the nozzle throat to open and close at a frequency proportional to the speed of sound of the injected gas. Measurements of frequency and mass flow rate as a function of supply pressure are discussed for various injector designs. Preliminary results are presented for wall-normal injection of helium into a Mach-2 ducted airflow. The data include schlieren images in the injectant plume in a plane normal to the flow, downstream of injection.

[Surgical excision and botulinum toxin A injection for vocal process granuloma].

PubMed

Ma, Lijing; Xiao, Yang; Ye, Jingying; Yang, Qingwen; Wang, Jun

2015-01-01

To study the efficacy of treatment with microsurgery in combination with local injection of type A botulinum toxin for vocal process granuloma. 28 patients with vocal process granuloma received endotracheal intubation under general anesthesia. The lesion was removed with micro-scissor and CO2 laster under a self-retaining laryngoscope and microscope. The incision and mucous membrane surrounding the wound was closed with 8-0 absorbable suture. 4-point injection of botulinum toxin type A 8-15 u was then performed along the thyroarytenoid muscle and arytenoid muscle of the same side. Postoperative medication was administered based on disease causes. All patients experienced vocal cord dyskinesia of the injected side 2-3 days after surgery. At 1 month after the surgery, wound healing was good in all the 28 patients, and the vocal cord movement was limited at the injected side. At 3 months, movement of the bilateral vocal cords was normal, and the vocal cord process mucosa was smooth. Patients were followed up for more than a year, and only one patient had recurrence in 2 months after surgery. The cure rate was 96. 4%. Combination of laryngeal microsurgery and type A botulinum toxin local injection can shorten the treatment course of vocal process granuloma.

Development of Metal Plate with Internal Structure Utilizing the Metal Injection Molding (MIM) Process.

PubMed

Shin, Kwangho; Heo, Youngmoo; Park, Hyungpil; Chang, Sungho; Rhee, Byungohk

2013-12-12

In this study, we focus on making a double-sided metal plate with an internal structure, such as honeycomb. The stainless steel powder was used in the metal injection molding (MIM) process. The preliminary studies were carried out for the measurement of the viscosity of the stainless steel feedstock and for the prediction of the filling behavior through Computer Aided Engineering (CAE) simulation. PE (high density polyethylene (HDPE) and low density polyethylene (LDPE)) and polypropylene (PP) resins were used to make the sacrificed insert with a honeycomb structure using a plastic injection molding process. Additionally, these sacrificed insert parts were inserted in the metal injection mold, and the metal injection molding process was carried out to build a green part with rectangular shape. Subsequently, debinding and sintering processes were adopted to remove the sacrificed polymer insert. The insert had a suitable rigidity that was able to endure the filling pressure. The core shift analysis was conducted to predict the deformation of the insert part. The 17-4PH feedstock with a low melting temperature was applied. The glass transition temperature of the sacrificed polymer insert would be of a high grade, and this insert should be maintained during the MIM process. Through these processes, a square metal plate with a honeycomb structure was made.

Development of Metal Plate with Internal Structure Utilizing the Metal Injection Molding (MIM) Process

PubMed Central

Shin, Kwangho; Heo, Youngmoo; Park, Hyungpil; Chang, Sungho; Rhee, Byungohk

2013-01-01

In this study, we focus on making a double-sided metal plate with an internal structure, such as honeycomb. The stainless steel powder was used in the metal injection molding (MIM) process. The preliminary studies were carried out for the measurement of the viscosity of the stainless steel feedstock and for the prediction of the filling behavior through Computer Aided Engineering (CAE) simulation. PE (high density polyethylene (HDPE) and low density polyethylene (LDPE)) and polypropylene (PP) resins were used to make the sacrificed insert with a honeycomb structure using a plastic injection molding process. Additionally, these sacrificed insert parts were inserted in the metal injection mold, and the metal injection molding process was carried out to build a green part with rectangular shape. Subsequently, debinding and sintering processes were adopted to remove the sacrificed polymer insert. The insert had a suitable rigidity that was able to endure the filling pressure. The core shift analysis was conducted to predict the deformation of the insert part. The 17-4PH feedstock with a low melting temperature was applied. The glass transition temperature of the sacrificed polymer insert would be of a high grade, and this insert should be maintained during the MIM process. Through these processes, a square metal plate with a honeycomb structure was made. PMID:28788427

Embolic stroke associated with injection of buprenorphine tablets.

PubMed

Lim, C C Tchoyoson; Lee, Sze Haur; Wong, Yee-Choon; Hui, Francis

2009-09-15

Drug users who crush, dissolve, and inject buprenorphine tablets parenterally may be at risk of severe thromboembolic complications or death. We describe patients with neurologic complications after injecting buprenorphine tablets. Brain MRI including diffusion-weighted imaging (DWI) in patients admitted to the neurologic department after injecting buprenorphine tablets were reviewed. Seven men had neurologic complications after buprenorphine tablet injection. In 5 patients, multiple small scattered hyperintense lesions were detected on DWI in the cortex, white matter, and basal ganglia of the cerebral hemisphere; one patient had a single small lesion. The side of MRI abnormality corresponded to the side of needle marks on the neck except in one patient who had bilateral injections. One patient, who denied injecting into the neck, had DWI abnormalities in the middle cerebral artery territory on one side and occlusion of the ipsilateral internal carotid artery. Buprenorphine tablets can be intentionally or inadvertently injected into the carotid artery, causing a characteristic appearance on diffusion-weighted imaging, consistent with embolic cerebral infarction.

Improving hole injection efficiency by manipulating the hole transport mechanism through p-type electron blocking layer engineering.

PubMed

Zhang, Zi-Hui; Ju, Zhengang; Liu, Wei; Tan, Swee Tiam; Ji, Yun; Kyaw, Zabu; Zhang, Xueliang; Hasanov, Namig; Sun, Xiao Wei; Demir, Hilmi Volkan

2014-04-15

The p-type AlGaN electron blocking layer (EBL) is widely used in InGaN/GaN light-emitting diodes (LEDs) for electron overflow suppression. However, a typical EBL also reduces the hole injection efficiency, because holes have to climb over the energy barrier generated at the p-AlGaN/p-GaN interface before entering the quantum wells. In this work, to address this problem, we report the enhancement of hole injection efficiency by manipulating the hole transport mechanism through insertion of a thin GaN layer of 1 nm into the p-AlGaN EBL and propose an AlGaN/GaN/AlGaN-type EBL outperforming conventional AlGaN EBLs. Here, the position of the inserted thin GaN layer relative to the p-GaN region is found to be the key to enhancing the hole injection efficiency. InGaN/GaN LEDs with the proposed p-type AlGaN/GaN/AlGaN EBL have demonstrated substantially higher optical output power and external quantum efficiency.

Clinical outcomes of individualized botulinum neurotoxin type A injection techniques in patients with essential blepharospasm.

PubMed

Sung, Youngje; Nam, Sang Min; Lew, Helen

2015-04-01

To assess the clinical outcomes following botulinum neurotoxin type A (BoNT-A) treatment with an individualized injection technique based on the types of spasms and to compare the results of the individualized injection technique with those of the conventional injection technique in the same patients. From November 2011 to July 2013, 77 BoNT-A injections were performed in 38 patients. Eighteen patients were treated with conventional BoNT-A injections before 2011, and 20 patients were referred to our hospital for unsatisfactory results after a conventional injection technique. We classified the patients by spasm-dominant sites: the lateral orbital area, representing the orbital orbicularis-dominant group (ODG); the glabella, representing the corrugator-dominant group (CDG); and the ptosis, representing the palpebral part of the orbicularis-dominant group (PDG). We increased the injection dose into the spasm-dominant sites of the blepharospasm groups. We assessed subjective symptom scores (functional disability score, FDS) after treatment. This study included 38 patients (26 women, 12 men; mean age, 60.6 ± 10.9 years). There were 21 patients in the ODG, 10 patients in the CDG, and 7 patients in the PDG. Mean ages were 59.7 ± 12.6, 59.8 ± 8.5, and 66.8 ± 9.0 years, and mean BoNT-A injection dose was 38.8 ± 11.2, 38.8 ± 11.2, and 38.8 ± 10.8 U in each group, respectively (p = 0.44, 0.82 Kruskal-Wallis test). Mean FDS after injection was 1.7 ± 0.7 in the ODG, 1.4 ± 0.8 in the CDG, and 1.2 ± 0.3 in the PDG. There were significant differences in reading and job scale among the three groups. In a comparison between the conventional and individualized injection techniques, there was a significant improvement in mean FDS and in the reading scale in the PDG with the individualized injection technique. The success rate was 92.1% in the conventional injection group and 94.1% in the individualized injection group. The individualized injection technique of BoNT-A according to the spasm-dominant site is an effective and safe treatment method for essential blepharospasm patients.

Breast EIT using a new projected image reconstruction method with multi-frequency measurements.

PubMed

Lee, Eunjung; Ts, Munkh-Erdene; Seo, Jin Keun; Woo, Eung Je

2012-05-01

We propose a new method to produce admittivity images of the breast for the diagnosis of breast cancer using electrical impedance tomography(EIT). Considering the anatomical structure of the breast, we designed an electrode configuration where current-injection and voltage-sensing electrodes are separated in such a way that internal current pathways are approximately along the tangential direction of an array of voltage-sensing electrodes. Unlike conventional EIT imaging methods where the number of injected currents is maximized to increase the total amount of measured data, current is injected only twice between two pairs of current-injection electrodes attached along the circumferential side of the breast. For each current injection, the induced voltages are measured from the front surface of the breast using as many voltage-sensing electrodes as possible. Although this electrode configurational lows us to measure induced voltages only on the front surface of the breast,they are more sensitive to an anomaly inside the breast since such an injected current tends to produce a more uniform internal current density distribution. Furthermore, the sensitivity of a measured boundary voltage between two equipotential lines on the front surface of the breast is improved since those equipotential lines are perpendicular to the primary direction of internal current streamlines. One should note that this novel data collection method is different from those of other frontal plane techniques such as the x-ray projection and T-scan imaging methods because we do not get any data on the plane that is perpendicular to the current flow. To reconstruct admittivity images using two measured voltage data sets, a new projected image reconstruction algorithm is developed. Numerical simulations demonstrate the frequency-difference EIT imaging of the breast. The results show that the new method is promising to accurately detect and localize small anomalies inside the breast.

Aspiration in injections: should we continue or abandon the practice?

PubMed Central

Sepah, Yasir; Samad, Lubna; Altaf, Arshad; Halim, Muhammad Sohail; Rajagopalan, Nithya; Javed Khan, Aamir

2017-01-01

Aspiration during any kind of injection is meant to ensure that the needle tip is at the desired location during this blind procedure. While aspiration appears to be a simple procedure, it has generated a lot of controversy concerning the perceived benefits and indications. Advocates and opponents of aspiration both make logically sound claims. However, due to scarcity of available data, there is no evidence that this procedure is truly beneficial or unwarranted. Keeping in view the huge number of injections given worldwide, it is important that we draw attention to key questions regarding aspiration that, up till now, remain unanswered. In this review, we have attempted to gather and present literature on aspiration both from published and non-published sources in order to provide not only an exhaustive review of the subject, but also a starting point for further studies on more specific areas requiring clarification. A literature review was conducted using the US National Institute of Health’s PubMed service (including Medline), Google Scholar and Scopus. Guidelines provided by the World Health Organization, Safe Injection Global Network, International Council of Nursing, Center for Disease Control, US Federal Drug Agency, UK National Health Services, British Medical Association, Europe Nursing and Midwifery Council, Public Health Agency Canada, Pakistan Medical Association and International Organization of Standardization recommendations 7886 parts 1-4 for sterile hypodermics were reviewed for relevant information. In addition, curricula of several medical/nursing schools from India, Nigeria and Pakistan, the US pharmacopeia Data from the WHO Program for International Drug Monitoring network in regard to adverse events as a result of not aspirating prior to injection delivery were reviewed. Curricula of selected major medical/nursing schools in India, Nigeria and Pakistan, national therapeutic formularies, product inserts of most commonly used drugs and other possible sources of information regarding aspiration and injections were consulted as well. PMID:28344770

Comparison of the impact on health-related quality of life of repeated detrusor injections of botulinum toxin in patients with idiopathic or neurogenic detrusor overactivity.

PubMed

Gamé, Xavier; Khan, Shahid; Panicker, Jalesh N; Kalsi, Vinay; Dalton, Catherine; Elneil, Sohier; Hamid, Rizwan; Dasgupta, Prokar; Fowler, Clare J

2011-06-01

Therapy (case series). 4. What's known on the subject? and What does the study add? We know that repeated injections of botulinum toxin A are effective in treating refractory detrusor overactivity particularly in NDO. This study shows that in both NDO and IDO repeated injections of the toxin improve quality of life as assessed by three validated questionnaires. The effect is most marked after the first injection in NDO patients but thereafter similar in both groups. To compare the effect of repeated detrusor injections of botulinum toxin (BoNT-A) on health-related quality of life (HRQL) in patients with idiopathic (IDO) or neurogenic detrusor overactivity (NDO). Between 2003 and 2009, 151 patients (109 with NDO and 42 with IDO) were treated by BoNT-A (Botox®, Allergan Inc., Irvine, CA, USA). Changes in HRQL were assessed using the validated short forms of Urogenital Distress Inventory (UDI-6), the Incontinence Impact Questionnaire (IIQ-7) and EuroQOL-5D (EQ-5D) before and 4 weeks after BoNT-A. The maximum number of repeated injections was five (mean±sd, 2.8±1.05). Mean±sd follow-up was 27.49±17.01 months. The UDI-6 and IIQ-7 questionnaires showed a consistent improvement after repeated injections in both groups with detrusor overactivity. The EQ-5D was not statistically different before and after each injection in either the NDO or IDO population. After repeated injections, no statistical differences in the change on the UDI-6 and IIQ-7 scores were found between NDO and IDO, except after the first treatment, when the decrease in UDI-6 was higher in NDO than in IDO. The EQ-5D anxiety and depression subscore improved in both groups after each injection and with the number of injections. In IDO, after the second injection, no patient reported extreme anxiety or depression and, after the fourth injection, none had anxiety or depression. The inter-injection interval was shorter after the first injection in those with NDO than in IDO but was similar thereafter. Intradetrusor injections of BoNT-A improved the HRQL of both NDO and IDO patients. Although improvement in HRQL was greater and the duration of efficacy shorter in NDO patients after the first injection, there was no significant difference after subsequent injections. Mean inter-injection interval in IDO and in NDO patients was similar from the second injection onwards and improvements in HRQL score were the same. © 2010 THE AUTHORS. BJU INTERNATIONAL © 2010 BJU INTERNATIONAL.

The effect and complication of botulinum toxin type a injection with serial casting for the treatment of spastic equinus foot.

PubMed

Lee, Sook Joung; Sung, In Young; Jang, Dae Hyun; Yi, Jin Hwa; Lee, Jin Ho; Ryu, Ju Seok

2011-06-01

To identify the effect of serial casting combined with Botulinum toxin type A (BTX-A) injection on spastic equinus foot. Twenty-nine children with cerebral palsy who had equinus foot were recruited from the outpatient clinic of Rehabilitation Medicine. The children were divided into 2 groups, one of which received serial casting after BTX-A injection, and the other which only received BTX-A injection. Serial casting started 3 weeks after the BTX-A injection, and was changed weekly for 3 times. Spasticity of the ankle joint was evaluated using the modified Ashworth scale (MAS), and the modified Tardieu scale (MTS). Gait pattern was measured using the physician's rating scale (PRS). The degree of ankle dorsiflexion and the MAS improved significantly until 12 weeks following the BTX-A injection in the serial casting group (p<0.001), while the BTX-A injection-only group improved until 6 weeks following injection (p<0.05). The combined group showed a significantly greater increase in the degree of dorsiflexion compared to the BTX-A injection-only group at post-injection weeks 6 and 12 (p<0.05). Three children (11.5%) suffered from foot ulcers as a complication caused by the serial casting. Our study demonstrated that the effect of BTX-A injection with serial casting was superior and lasted longer than the effect of BTX-A injection only in patients with spastic equinus foot. We therefore recommend BTX-A injection with serial casting for the treatment of equinus foot. However, physicians must also consider the possible complications associated with serial casting.

[Cell lineage tracing of regenerating cells after partial pancreatectomy using pseudo-type retrovirus].

PubMed

Zhang, Lixin; Ju, Xiaofang; Wang, Fa; Guo, Zhiwei; Piao, Shanhua; Teng, Chunbo

2008-04-01

Pancreas is an important mixed gland having both endocrine and exocrine functions, and has been proven regeneration after injury. To explore the cell lineage tracing methods in pancreas in vivo and the regenerate cells source, we used pseudo-type retrovirus to transfect adult mouse pancreas which had been partially pancreatectomized by rubbing the kerf using a cotton stick saturated with retrovirus suspension then injecting 100 microL retrovirus suspension into pancreas, injecting 100 microL retrovirus by caudal vein, or interperitoneally injecting retrovirus respectively. The results showed that the method of rubbing the kerf then injection of retrovirus suspension into pancreas could more effectively mark the pancreatic cells than the caudal vein injection and the intraperitoneal injection did in vivo. Furthermore, this study also found that some acinus cells could accept injury stimulus signals to regenerate through resuming mitosis after pancreatic injury. This study establishes a cell lineage tracing method in pancreas in vivo using retrovirus and offers a clue for gene therapy of pancreatic diseases using retrovirus vectors.

Coal-water slurry fuel internal combustion engine and method for operating same

DOEpatents

McMillian, Michael H.

1992-01-01

An internal combustion engine fueled with a coal-water slurry is described. About 90 percent of the coal-water slurry charge utilized in the power cycle of the engine is directly injected into the main combustion chamber where it is ignited by a hot stream of combustion gases discharged from a pilot combustion chamber of a size less than about 10 percent of the total clearance volume of main combustion chamber with the piston at top dead center. The stream of hot combustion gases is provided by injecting less than about 10 percent of the total coal-water slurry charge into the pilot combustion chamber and using a portion of the air from the main combustion chamber that has been heated by the walls defining the pilot combustion chamber as the ignition source for the coal-water slurry injected into the pilot combustion chamber.

Modeling of magnetic particle orientation in magnetic powder injection molding

NASA Astrophysics Data System (ADS)

Doo Jung, Im; Kang, Tae Gon; Seul Shin, Da; Park, Seong Jin

2018-03-01

The magnetic micro powder orientation under viscous shear flow has been analytically understood and characterized into a new analytical orientation model for a powder injection molding process. The effects of hydrodynamic force from the viscous flow, external magnetic force and internal dipole-dipole interaction were considered to predict the orientation under given process conditions. Comparative studies with a finite element method proved the calculation validity with a partial differential form of the model. The angular motion, agglomeration and magnetic chain formation have been simulated, which shows that the effect of dipole-dipole interaction among powders on the orientation state becomes negligible at a high Mason number condition and at a low λ condition (the ratio of external magnetic field strength and internal magnetic moment of powder). Our developed model can be very usefully employed in the process analysis and design of magnetic powder injection molding.

Effect of the NACA Injection Impeller on the Mixture Distribution of a Double-row Radial Aircraft Engine

NASA Technical Reports Server (NTRS)

Marble, Frank E.; Ritter, William K.; Miller, Mahlon A.

1946-01-01

For the normal range of engine power the impeller provided marked improvement over the standard spray-bar injection system. Mixture distribution at cruising was excellent, maximum cylinder temperatures were reduced about 30 degrees F, and general temperature distribution was improved. The uniform mixture distribution restored the normal response of cylinder temperature to mixture enrichment and it reduced the possibility of carburetor icing, while no serious loss in supercharger pressure rise resulted from injection of fuel near the impeller outlet. The injection impeller also furnished a convenient means of adding water to the charge mixture for internal cooling.

Comparison of insulin diluent leakage postinjection using two different needle lengths and injection volumes in obese patients with type 1 or type 2 diabetes mellitus.

PubMed

Ignaut, Debra A; Fu, Haoda

2012-03-01

Smaller gauge, shorter needles have been shown to be as safe and effective for insulin delivery as longer needles in many patients. However, in obese patients with diabetes, results have been inconsistent with regard to the impact of needle length on leakage of injectate. A single-blind, randomized, two-period, crossover study compared injections with 5 mm needles to 8 mm needles regarding leakage, pain, bleeding, and bruising at abdominal injection sites in obese patients with diabetes using 20- and 60-unit (U) volume equivalent injections of sterile insulin diluent. Fifty-six patients (54% male; mean age 56 years; mean body mass index of 36 kg/m(2)) with type 1 (n = 13) or type 2 (n = 43) diabetes participated. Median leakage (U) was similar for both needles [0.04 (5 mm/20 U) vs 0.02 (8 mm/20 U), P = .32; and 0.04 (5 mm/60 U) vs 0.02 (8 mm/60 U), P = .48]. Pain scores (mean) were similar [1.27 (5 mm/20 U) vs 1.14 (8 mm/20 U), P = .75, and 1.68 (5 mm/60 U) vs 0.95 (8 mm/60 U, P = .21)]. The proportion of injections with bleeding [10.8% (5 mm/20 U) vs 5.83% (8 mm/20 U), P = .23, and 4.92% (5 mm/60 U) vs 6.56% (8 mm/60 U), P = .73] and the proportion of patients with bruising [8.11% (5 mm/20 U) vs 10.81% (8 mm/20 U), p = .56, and 21.05% (5 mm/60 U) vs 26.32% (8 mm/60 U), p = .65] at injection sites were similar. Mean bruise size (mm) [0.73 (5 mm/20 U] vs 2.68 (8 mm/20 U), P = .23; and 1.11 (5 mm/60 U) vs 4.21 (8 mm/60 U), P = .08] at injection sites was similar. This study supports the suitability of the 5 mm needle for the injection of insulin in obese patients with diabetes. © 2012 Diabetes Technology Society.

Modeling the effects of auxiliary gas injection and fuel injection rate shape on diesel engine combustion and emissions

NASA Astrophysics Data System (ADS)

Mather, Daniel Kelly

1998-11-01

The effect of auxiliary gas injection and fuel injection rate-shaping on diesel engine combustion and emissions was studied using KIVA a multidimensional computational fluid dynamics code. Auxiliary gas injection (AGI) is the injection of a gas, in addition to the fuel injection, directly into the combustion chamber of a diesel engine. The objective of AGI is to influence the diesel combustion via mixing to reduce emissions of pollutants (soot and NO x). In this study, the accuracy of modeling high speed gas jets on very coarse computational grids was addressed. KIVA was found to inaccurately resolve the jet flows near walls. The cause of this inaccuracy was traced to the RNG k - ɛ turbulence model with the law-of-the-wall boundary condition used by KIVA. By prescribing the lengthscale near the nozzle exit, excellent agreement between computed and theoretical jet penetration was attained for a transient gas jet into a quiescent chamber at various operating conditions. The effect of AGI on diesel engine combustion and emissions was studied by incorporating the coarse grid gas jet model into a detailed multidimensional simulation of a Caterpillar 3401 heavy-duty diesel engine. The effects of AGI timing, composition, amount, orientation, and location were investigated. The effects of AGI and split fuel injection were also investigated. AGI was found to be effective at reducing soot emissions by increasing mixing within the combustion chamber. AGI of inert gas was found to be effective at reducing emissions of NOx by depressing the peak combustion temperatures. Finally, comparison of AGI simulations with experiments were conducted for a TACOM-LABECO engine. The results showed that AGI improved soot oxidation throughout the engine cycle. Simulation of fuel injection rate-shaping investigated the effects of three injection velocity profiles typical of unit-injector type, high-pressure common-rail type, and accumulator-type fuel injectors in the Caterpillar 3401 heavy-duty diesel engine. Pollutant emissions for the engine operating with different injection velocity profiles reflected the sensitivity of diesel engines to the location of pollutants within the combustion chamber, as influenced by the fuel injection.

The efficiency of botulinum toxin type A for the treatment of masseter muscle pain in patients with temporomandibular joint dysfunction and tension-type headache.

PubMed

Pihut, Malgorzata; Ferendiuk, Ewa; Szewczyk, Michal; Kasprzyk, Katarzyna; Wieckiewicz, Mieszko

2016-01-01

Temporomandibular joint dysfunction are often accompanied by symptoms of headache such as tension-type headache which is the most frequent spontaneous primary headache. Masseter muscle pain is commonly reported in this group. The purpose of the study was to assess the efficiency of intramuscular botulinum toxin type A injections for treating masseter muscle pain in patients with temporomandibular joint dysfunction and tension-type headache. This prospective outcome study consisted of 42 subjects of both genders aged 19-48 years diagnosed with masseter muscle pain related to temporomandibular joint dysfunction and tension-type headache. The subjects were treated by the intramuscular injection of 21 U (mice units) of botulinum toxin type A (Botox, Allergan) in the area of the greatest cross-section surface of both masseter bellies. Pain intensity was evaluated using visual analogue scale (VAS) and verbal numerical rating scale (VNRS) 1 week before the treatment and 24 weeks after the treatment. The obtained data were analyzed using the Wilcoxon matched pairs test (p ≤ 0,005). The results of this study showed a decrease in the number of referred pain episodes including a decrease in pain in the temporal region bilaterally, a reduction of analgesic drugs intake as well as a decrease in reported values of VAS and VNRS after injections (p = 0,000). The intramuscular botulinum toxin type A injections have been an efficient method of treatment for masseter muscle pain in patients with temporomandibular joint dysfunction and tension-type headache.

An in vivo analysis of facial muscle change treated with botulinum toxin type A using digital image speckle correlation

NASA Astrophysics Data System (ADS)

Xu, Yan; Palmaccio, Samantha Palmaccio; Bui, Duc; Dagum, Alexander; Rafailovich, Miriam

Been famous for clinical use from early 1980s, the neuromuscular blocking agent Botulinum toxin type A (BTX-A), has been used to reduce wrinkles for a long time. Only little research has been done to quantify the change of muscle contraction before and after injection and most research paper depend on subjective evaluation from both patients and surgeons. In our research, Digital Image Speckle Correlation (DISC) was employed to study the mechanical properties of skin, contraction mode of muscles (injected) and reaction of neighbor muscle group (un-injected).At the same time, displacement patterns (vector maps)generated by DISC can predict injection locus for surgeons who normally handle it depending only on visual observation.

Passivated p-type silicon: Hole injection tunable anode material for organic light emission

NASA Astrophysics Data System (ADS)

Zhao, W. Q.; Ran, G. Z.; Xu, W. J.; Qin, G. G.

2008-02-01

We find that hole injection can be enhanced simply by selecting a lower-resistivity p-Si anode to match an electron injection enhancement for organic light emitting diodes with ultrathin-SiO2-layer-passivated p-Si anode (Si-OLED). For a Si-OLED with ordinary AlQ electron transport layer, the optimized resistivity of the p-Si anode is 40Ωcm; for that with n-doped Bphen electron transport layer, it decreases to 5Ωcm. Correspondingly, the maximum power efficiency increases from 0.3to1.9lm /W, even higher than that of an indium tin oxide control device (1.4lm/W). This passivated p-type silicon is a hole injection tunable anode material for OLED.

HIV Infection among People Who Inject Drugs: The Challenge of Racial/Ethnic Disparities

ERIC Educational Resources Information Center

Des Jarlais, Don C.; McCarty, Dennis; Vega, William A.; Bramson, Heidi

2013-01-01

Racial/ethnic disparities in HIV infection, with minority groups typically having higher rates of infection, are a formidable public health challenge. In the United States, among both men and women who inject drugs, HIV infection rates are elevated among Hispanics and non-Hispanic Blacks. A meta-analysis of international research concluded that…

An experimental study of fuel injection strategies in CAI gasoline engine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hunicz, J.; Kordos, P.

2011-01-15

Combustion of gasoline in a direct injection controlled auto-ignition (CAI) single-cylinder research engine was studied. CAI operation was achieved with the use of the negative valve overlap (NVO) technique and internal exhaust gas re-circulation (EGR). Experiments were performed at single injection and split injection, where some amount of fuel was injected close to top dead centre (TDC) during NVO interval, and the second injection was applied with variable timing. Additionally, combustion at variable fuel-rail pressure was examined. Investigation showed that at fuel injection into recompressed exhaust fuel reforming took place. This process was identified via an analysis of the exhaust-fuelmore » mixture composition after NVO interval. It was found that at single fuel injection in NVO phase, its advance determined the heat release rate and auto-ignition timing, and had a strong influence on NO{sub X} emission. However, a delay of single injection to intake stroke resulted in deterioration of cycle-to-cycle variability. Application of split injection showed benefits of this strategy versus single injection. Examinations of different fuel mass split ratios and variable second injection timing resulted in further optimisation of mixture formation. At equal share of the fuel mass injected in the first injection during NVO and in the second injection at the beginning of compression, the lowest emission level and cyclic variability improvement were observed. (author)« less

Compatibility and Stability of VARUBI (Rolapitant) Injectable Emulsion Admixed with Intravenous Palonosetron Hydrochloride Injection and Dexamethasone Sodium Phosphate Injection.

PubMed

Wu, George; Powers, Dan; Yeung, Stanley; Chen, Frank

2018-01-01

Prophylaxis or therapy with a combination of a neurokinin 1 (NK-1) receptor antagonist (RA), a 5-hydroxytryptamine-3 (5-HT3) RA, and dexamethasone is recommended by international antiemesis guidelines for the prevention of chemotherapy-induced nausea and vomiting for patients receiving highly emetogenic chemotherapy and for selected patients receiving moderately emetogenic chemotherapy. VARUBI (rolapitant) is a substance P/NK-1 RA that was recently approved by the U.S. Food and Drug Administration as an injectable emulsion in combination with other antiemetic agents in adults for the prevention of delayed nausea and vomiting associated with initial and repeat courses of emetogenic cancer chemotherapy, including, but not limited to, highly emetogenic chemotherapy. Palonosetron is one of the 5-HT3 RAs indicated for the prevention of nausea and/or vomiting associated with initial and repeat courses of emetogenic cancer therapy, including high-dose cisplatin. Herein, we describe the physical and chemical compatibility and stability of VARUBI injectable emulsion (166.5 mg/92.5 mL [1.8 mg/mL, free base], equivalent to 185 mg of rolapitant hydrochloride) admixed with palonosetron injection 0.25 mg free base in 5 mL (equivalent to 0.28 mg hydrochloride salt) and with either 5 mL (20 mg) or 2.5 mL (10 mg) of dexamethasone sodium phosphate. Admixtures were prepared and stored in VARUBI injectable emulsion ready-to-use glass vials as supplied by the rolapitant manufacturer and in four types of commonly used intravenous administration (tubing) sets. Assessment of the physical and chemical compatibility and stability of the admixtures in the VARUBI ready-to-use vials stored at room temperature (20°C to 25°C) under fluorescent light and under refrigeration (2°C to 8°C protected from light) was conducted at 0, 1, 6, 24, and 48 hours, and that of the admixtures in the intravenous tubing sets was evaluated at 0, 2, and 6 hours of storage at 20°C to 25°C. Physical stability was evaluated by visual examination of the container contents under normal room light, and measurement of turbidity, globule size, and particulate matter. Chemical stability was assessed by measuring the pH of the admixture and determining drug concentrations (potency) and impurity levels by high-performance liquid chromatographic analysis. All samples were physically and chemically compatible throughout the study duration. The pH, turbidity, globule size, and particulate matter of the admixture stayed within narrow and acceptable ranges. VARUBI injectable emulsion admixed with intravenous palonosetron and dexamethasone was chemically and physically stable in the ready-to-use glass vials for at least 24 hours at room temperature and 48 hours under refrigeration, as well as in the four selected intravenous tubing sets for at least 6 hours at room temperature. No decrease of drug concentration (or potency) of any admixed components occurred in the samples stored at the two temperature ranges and time periods studied as measured by high-performance liquid chromatographic analysis. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

Geophysical Monitoring of Two types of Subsurface Injection

EPA Science Inventory

Nano-scale particles of zero-valent iron (ZVI) were injected into the subsurface at the 100-D area of the DOE Hanford facility. The intent of this iron injection was to repair a gap in the existing in-situ redox manipulation barrier located at the site. A number of geophysical me...

Video- Water Injected Into Bubble Onboard the International Space Station (ISS)

NASA Technical Reports Server (NTRS)

2003-01-01

Saturday Morning Science, the science of opportunity series of applied experiments and demonstrations, performed aboard the International Space Station (ISS) by Expedition 6 astronaut Dr. Don Pettit, revealed some remarkable findings. In this video, Dr. Pettit demonstrates using a syringe to inject water into a bubble. The result amazed Dr. Pettit and his crew mates. They observed that the droplets may bounce around for 5 or 6 collisions within the bubble, and then may partially or all at once exchange masses with the bubble. Dr. Pettit speculates the dynamics as a possible interplay between tension forces of kinetic energy and momentum, and possibly even charged forces.

Mixed mode control method and engine using same

DOEpatents

Kesse, Mary L [Peoria, IL; Duffy, Kevin P [Metamora, IL

2007-04-10

A method of mixed mode operation of an internal combustion engine includes the steps of controlling a homogeneous charge combustion event timing in a given engine cycle, and controlling a conventional charge injection event to be at least a predetermined time after the homogeneous charge combustion event. An internal combustion engine is provided, including an electronic controller having a computer readable medium with a combustion timing control algorithm recorded thereon, the control algorithm including means for controlling a homogeneous charge combustion event timing and means for controlling a conventional injection event timing to be at least a predetermined time from the homogeneous charge combustion event.

Glutamate transporter type 3 participates in maintaining morphine-induced conditioned place preference.

PubMed

Wan, Li; Bi, Jiangjiang; Li, Jun; Zuo, Zhiyi

2017-03-06

Glutamate transporters (EAAT) have been implicated in the drug addiction behavior. We determined whether EAAT type 3 (EAAT3) played a role in morphine addiction. Six- to eight-week-old EAAT3 knockout (EAAT3 -/- ) mice and their wild-type littermates received 3 intraperitoneal injections of 10mg/kg morphine, each on an alternative day, to induce conditioned place preference (CPP). Two days after the place preference returned to baseline, mice received 2.5mg/kg morphine to induce reinstatement. Some mice received intraperitoneal injection of 4mg/kg riluzole, an EAAT activator, 30min before morphine or saline injection. Hippocampus, medial prefrontal cortex, nucleus accumbens and ventral tegmental area were harvested for Western analysis 24h after the last dose of morphine was injected. Morphine induced CPP in wild-type and EAAT3 -/- mice. Gender is not a statistically significant factor to influence this behavior. This conditioned behavior extinguished after morphine administration was stopped for 8-9days in wild-type mice, while this extinction occurred 6days after discontinuation of morphine injection in EAAT3 -/- mice. A small dose of morphine similarly reinstated the conditioned behavior in the wild-type and EAAT3 -/- mice. Riluzole abolished morphine-induced CPP during the initial place preference. Morphine increased EAAT3 expression in the plasma membrane of medial prefrontal cortex, nucleus accumbens and ventral tegmental area but did not affect EAAT3 expression in the hippocampus. These results suggest that EAAT3 delays the extinction of morphine-induced CPP. EAAT activation may prevent the formation of morphine-induced CPP. Copyright © 2016 IBRO. Published by Elsevier Ltd. All rights reserved.

Glutamate transporter type 3 participates in maintaining morphine-induced conditioned place preference

PubMed Central

Wan, Li; Bi, Jiangjiang; Li, Jun; Zuo, Zhiyi

2017-01-01

Glutamate transporters (EAAT) have been implicated in the drug addiction behavior. We determined whether EAAT type 3 (EAAT3) played a role in morphine addiction. Six- to eight-week old EAAT3 knockout (EAAT3−/−) mice and their wild-type littermates received 3 intraperitoneal injections of 10 mg/kg morphine, each on an alternative day, to induce conditioned place preference (CPP). Two days after the place preference returned to baseline, mice received 2.5 mg/kg morphine to induce reinstatement. Some mice received intraperitoneal injection of 4 mg/kg riluzole, an EAAT activator, 30 min before morphine or saline injection. Hippocampus, medial prefrontal cortex, nucleus accumbens and ventral tegmental area were harvested for Western analysis 24 h after the last dose of morphine was injected. Morphine induced CPP in wild-type and EAAT3−/− mice. Gender is not a statistically significant factor to influence this behavior. This conditioned behavior extinguished after morphine administration was stopped for 8 to 9 days in wild-type mice, while this extinction occurred 6 days after discontinuation of morphine injection in EAAT3−/− mice. A small dose of morphine similarly reinstated the conditioned behavior in the wild-type and EAAT3−/− mice. Riluzole abolished morphine-induced CPP during the initial place preference. Morphine increased EAAT3 expression in the plasma membrane of medial prefrontal cortex, nucleus accumbens and ventral tegmental area but did not affect EAAT3 expression in the hippocampus. These results suggest that EAAT3 delays the extinction of morphine-induced CPP. EAAT activation may prevent the formation of morphine-induced CPP. PMID:28049029

229 nm UV LEDs on aluminum nitride single crystal substrates using p-type silicon for increased hole injection

NASA Astrophysics Data System (ADS)

Liu, Dong; Cho, Sang June; Park, Jeongpil; Seo, Jung-Hun; Dalmau, Rafael; Zhao, Deyin; Kim, Kwangeun; Gong, Jiarui; Kim, Munho; Lee, In-Kyu; Albrecht, John D.; Zhou, Weidong; Moody, Baxter; Ma, Zhenqiang

2018-02-01

AlGaN based 229 nm light emitting diodes (LEDs), employing p-type Si to significantly increase hole injection, were fabricated on single crystal bulk aluminum nitride (AlN) substrates. Nitride heterostructures were epitaxially deposited by organometallic vapor phase epitaxy and inherit the low dislocation density of the native substrate. Following epitaxy, a p-Si layer is bonded to the heterostructure. LEDs were characterized both electrically and optically. Owing to the low defect density films, large concentration of holes from p-Si, and efficient hole injection, no efficiency droop was observed up to a current density of 76 A/cm2 under continuous wave operation and without external thermal management. An optical output power of 160 μW was obtained with the corresponding external quantum efficiency of 0.03%. This study demonstrates that by adopting p-type Si nanomembrane contacts as a hole injector, practical levels of hole injection can be realized in UV light-emitting diodes with very high Al composition AlGaN quantum wells, enabling emission wavelengths and power levels that were previously inaccessible using traditional p-i-n structures with poor hole injection efficiency.

Effect of Playing Interactive Computer Game on Distress of Insulin Injection Among Type 1 Diabetic Children

PubMed Central

Ebrahimpour, Fatemeh; Sadeghi, Narges; Najafi, Mostafa; Iraj, Bijan; Shahrokhi, Akram

2015-01-01

Background: Diabetic children and their families experience high level stress because of daily insulin injection. Objectives: This study was conducted to investigate the impact of an interactive computer game on behavioral distress due to insulin injection among diabetic children. Patients and Methods: In this clinical trial, thirty children (3-12 years) with type 1 diabetes who needed daily insulin injection were recruited and allocated randomly into two groups. Children in intervention groups received an interactive computer game and asked to play at home for a week. No special intervention was done for control group. The behavioral distress of groups was assessed before, during and after the intervention by Observational Scale of Behavioral Distress–Revised (OSBD-R). Results: Repeated measure ANOVA test showed no significantly difference of OSBD-R over time for control group (P = 0.08), but this changes is signification in the study group (P = 0.001). Comparison mean score of distress were significantly different between two groups (P = 0.03). Conclusions: According to the findings, playing interactive computer game can decrease behavioral distress induced by insulin injection in type 1 diabetic children. It seems this game can be beneficial to be used alongside other interventions. PMID:26199708

Electrical spin injection into GaAs based light emitting diodes using perpendicular magnetic tunnel junction-type spin injector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tao, B. S.; Beijing National Laboratory of Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190; Barate, P.

Remanent electrical spin injection into an InGaAs/GaAs based quantum well light emitting diode is realized by using a perpendicularly magnetized MgO/CoFeB/Ta/CoFeB/MgO spin injector. We demonstrate that the Ta interlayer plays an important role to establish the perpendicular magnetic anisotropy and the thickness of Ta interlayer determines the type of exchange coupling between the two adjacent CoFeB layers. They are ferromagnetically or antiferromagnetically coupled for a Ta thickness of 0.5 nm or 0.75 nm, respectively. A circular polarized electroluminescence (P{sub c}) of about 10% is obtained at low temperature and at zero magnetic field. The direction of the electrically injected spins is determinedmore » only by the orientation of the magnetization of the bottom CoFeB layer which is adjacent to the MgO/GaAs interface. This work proves the critical role of the bottom CoFeB/MgO interface on the spin-injection and paves the way for the electrical control of spin injection via magnetic tunnel junction-type spin injector.« less

Preparation and characterization of injectable fibrillar type I collagen and evaluation for pseudoaneurysm treatment in a pig model.

PubMed

Geutjes, Paul J; van der Vliet, J Adam; Faraj, Kaeuis A; de Vries, Noes; van Moerkerk, Herman T B; Wismans, Ronnie G; Hendriks, Thijs; Daamen, Willeke F; van Kuppevelt, Toin H

2010-11-01

Despite the efficacy of collagen in femoral artery pseudoaneurysm treatment, as reported in one patient study, its use has not yet gained wide acceptance in clinical practice. In this particular study, the collagen was not described in detail. To further investigate the potential of collagen preparations, we prepared and characterized highly purified injectable fibrillar type I collagen and evaluated its use for femoral artery pseudoaneurysm (PSA) treatment in vivo using a pig model. Purified fibrillar type I collagen was characterized using electron microscopy. The effect of three different sterilization procedures, ie, hydrogen peroxide gas plasma (H2O2), ethylene oxide gas (EtO), and gamma irradiation, was studied on both SDS-PAGE and platelet aggregation. Different collagen injectables were prepared (3%, 4%, and 5%) and tested using an injection force test applying a 21-gauge needle. To evaluate the network characteristics of the injectable collagen, the collagen was suspended in phosphate buffered saline (PBS) at 37°C and studied both macroscopically and electron microscopically. To determine whether the collagen induced hemostasis in vivo, a pig PSA model was used applying a 4% EtO sterilized collagen injectable, and evaluation by angiography and routine histology. Electron microscopy of the purified type I collagen revealed intact fibrils with a distinct striated pattern and a length<300 μm. Both SDS-PAGE and platelet aggregation analysis of the sterilized collagen indicated no major differences between EtO and H2O2 sterilization, although gamma-irradiated collagen showed degradation products. Both 3% and 4% (w/v) collagen suspensions were acceptable with respect to the force used (<50 N). The 4% suspension was selected as the preferred injectable collagen, which formed a dense network under physiologic conditions. Testing the collagen in vivo (n=5), the angiograms revealed that the PSA partly or completely coagulated. Histology confirmed the network formation, which was surrounded by thrombus. Collagen injectables were prepared and EtO sterilized without major loss of structural integrity and platelet activity. In vivo, the injectable collagen formed a dense network and triggered (partial) local hemostasis. Although optimization is needed, an injectable collagen may be used as a therapeutic agent for femoral PSA treatment. Copyright © 2010 Society for Vascular Surgery. Published by Mosby, Inc. All rights reserved.

Electrical spin injection from an n-type ferromagnetic semiconductor into a III-V device heterostructure

NASA Astrophysics Data System (ADS)

Kioseoglou, George; Hanbicki, Aubrey T.; Sullivan, James M.; van't Erve, Olaf M. J.; Li, Connie H.; Erwin, Steven C.; Mallory, Robert; Yasar, Mesut; Petrou, Athos; Jonker, Berend T.

2004-11-01

The use of carrier spin in semiconductors is a promising route towards new device functionality and performance. Ferromagnetic semiconductors (FMSs) are promising materials in this effort. An n-type FMS that can be epitaxially grown on a common device substrate is especially attractive. Here, we report electrical injection of spin-polarized electrons from an n-type FMS, CdCr2Se4, into an AlGaAs/GaAs-based light-emitting diode structure. An analysis of the electroluminescence polarization based on quantum selection rules provides a direct measure of the sign and magnitude of the injected electron spin polarization. The sign reflects minority rather than majority spin injection, consistent with our density-functional-theory calculations of the CdCr2Se4 conduction-band edge. This approach confirms the exchange-split band structure and spin-polarized carrier population of an FMS, and demonstrates a litmus test for these FMS hallmarks that discriminates against spurious contributions from magnetic precipitates.

SAPS-associated explosive brightening on the dusk-side: A new type of onset-like disturbance: A new type of onset-like disturbance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Henderson, M. G.; Morley, S. K.; Kepko, L. E.

Quasi-periodic energetic particle injections have been observed at geosynchronous orbit on the dusk-side during a steady magnetospheric convection event. Here, we examine high resolution auroral imager data and ground magnetometer data associated with the first of these injections and conclude that it was not associated with classical substorm signatures. It is proposed that these injections are caused by the explosive non-linear growth of a shear-flow-ballooning instability in the region where sub-auroral polarization streams (SAPS) also occur. It is suggested that interchange will occur preferentially in the low-conductivity SAPS region since the magnetic Richardson number is lowest there and the ‘line-tying’more » effect will also be least stabilizing there. We also propose that the observed particle injection signatures and auroral morphology constitute a new type of SAPS-associated explosive ‘onset-like’ disturbance that can occur during intervals of strong convection.« less

SAPS-associated explosive brightening on the dusk-side: A new type of onset-like disturbance: A new type of onset-like disturbance

DOE PAGES

Henderson, M. G.; Morley, S. K.; Kepko, L. E.

2017-12-06

Quasi-periodic energetic particle injections have been observed at geosynchronous orbit on the dusk-side during a steady magnetospheric convection event. Here, we examine high resolution auroral imager data and ground magnetometer data associated with the first of these injections and conclude that it was not associated with classical substorm signatures. It is proposed that these injections are caused by the explosive non-linear growth of a shear-flow-ballooning instability in the region where sub-auroral polarization streams (SAPS) also occur. It is suggested that interchange will occur preferentially in the low-conductivity SAPS region since the magnetic Richardson number is lowest there and the ‘line-tying’more » effect will also be least stabilizing there. We also propose that the observed particle injection signatures and auroral morphology constitute a new type of SAPS-associated explosive ‘onset-like’ disturbance that can occur during intervals of strong convection.« less

The Effect and Complication of Botulinum Toxin Type A Injection with Serial Casting for the Treatment of Spastic Equinus Foot

PubMed Central

Lee, Sook Joung; Jang, Dae Hyun; Yi, Jin Hwa; Lee, Jin Ho; Ryu, Ju Seok

2011-01-01

Objective To identify the effect of serial casting combined with Botulinum toxin type A (BTX-A) injection on spastic equinus foot. Method Twenty-nine children with cerebral palsy who had equinus foot were recruited from the outpatient clinic of Rehabilitation Medicine. The children were divided into 2 groups, one of which received serial casting after BTX-A injection, and the other which only received BTX-A injection. Serial casting started 3 weeks after the BTX-A injection, and was changed weekly for 3 times. Spasticity of the ankle joint was evaluated using the modified Ashworth scale (MAS), and the modified Tardieu scale (MTS). Gait pattern was measured using the physician's rating scale (PRS). Results The degree of ankle dorsiflexion and the MAS improved significantly until 12 weeks following the BTX-A injection in the serial casting group (p<0.001), while the BTX-A injection-only group improved until 6 weeks following injection (p<0.05). The combined group showed a significantly greater increase in the degree of dorsiflexion compared to the BTX-A injection-only group at post-injection weeks 6 and 12 (p<0.05). Three children (11.5%) suffered from foot ulcers as a complication caused by the serial casting. Conclusion Our study demonstrated that the effect of BTX-A injection with serial casting was superior and lasted longer than the effect of BTX-A injection only in patients with spastic equinus foot. We therefore recommend BTX-A injection with serial casting for the treatment of equinus foot. However, physicians must also consider the possible complications associated with serial casting. PMID:22506143

Optimizing chaos time-delay signature in two mutually-coupled semiconductor lasers through controlling internal parameters

NASA Astrophysics Data System (ADS)

Mu, Penghua; Pan, Wei; Yan, Lianshan; Luo, Bin; Zou, Xihua

2017-04-01

In this contribution, the effects of two key internal parameters, i.e. the linewidth-enhancement factor (α) and gain nonlinearity (𝜀), on time-delay signatures (TDS) concealment of two mutually-coupled semiconductor lasers (MCSLs) are numerically investigated. In particular, the influences of α and 𝜀 on the TDS concealment are compared and discussed systematically by setting different values of frequency detuning (Δf) and injection strength (η). The results show that the TDS can be better suppressed with high α or lower 𝜀 in the MCSLs. Two sets of desired optical chaos with TDS being strongly suppressed can be generated simultaneously in a wide injection parameter plane provided that α and 𝜀 are properly chosen, indicating that optimizing TDS suppression through controlling internal parameters can be generalized to any delayed-coupled laser systems.

Botulinum toxin type A for the treatment of sialorrhoea in amyotrophic lateral sclerosis: a clinical and neurophysiological study.

PubMed

Gilio, Francesca; Iacovelli, Elisa; Frasca, Vittorio; Gabriele, Maria; Giacomelli, Elena; Picchiori, Floriana; Soldo, Pietro; Cipriani, Anna Maria; Ruoppolo, Giovanni; Inghilleri, Maurizio

2010-08-01

Botulinum toxin type A (BoNT/A) has been proposed as an alternative treatment for sialorrhoea in patients with amyotrophic lateral sclerosis (ALS). In an open-label prospective study, BoNT/A was injected into the parotid glands bilaterally using anatomic landmarks in 26 ALS patients with bulbar symptoms. Two weeks after injection the severity of sialorrhoea and the related disability were evaluated subjectively and objectively. A group of healthy subjects acted as controls for saliva production. Patients also underwent electrophysiological tests to evaluate possible toxin effects in the nearby non-injected muscles by comparing the amplitude of compound motor action potentials (cMAPs) elicited by electrical stimulation and recorded from the orbicularis oculi and masseter muscles. After BoNT/A injections, of the 26 patients treated, 23 reported that the severity of sialorrhoea improved and the disabling symptoms diminished. Cotton roll weight also decreased after BoNT/A injection, suggesting a reduction in saliva production. Two patients complained of dry mouth. BoNT/A injection left the cMAP amplitude unchanged, suggesting that botulinum toxin does not significantly affect the non-injected facial and masticatory muscles. In conclusion, intraparotid anatomically-guided BoNT/A injection is an effective, easy, and safe treatment for sialorrhoea in patients with bulbar symptoms related to ALS.

Association of Insulin Pump Therapy vs Insulin Injection Therapy With Severe Hypoglycemia, Ketoacidosis, and Glycemic Control Among Children, Adolescents, and Young Adults With Type 1 Diabetes

PubMed Central

Karges, Beate; Schwandt, Anke; Heidtmann, Bettina; Kordonouri, Olga; Binder, Elisabeth; Schierloh, Ulrike; Boettcher, Claudia; Kapellen, Thomas; Rosenbauer, Joachim; Holl, Reinhard W.

2017-01-01

Importance Insulin pump therapy may improve metabolic control in young patients with type 1 diabetes, but the association with short-term diabetes complications is unclear. Objective To determine whether rates of severe hypoglycemia and diabetic ketoacidosis are lower with insulin pump therapy compared with insulin injection therapy in children, adolescents, and young adults with type 1 diabetes. Design, Setting, and Participants Population-based cohort study conducted between January 2011 and December 2015 in 446 diabetes centers participating in the Diabetes Prospective Follow-up Initiative in Germany, Austria, and Luxembourg. Patients with type 1 diabetes younger than 20 years and diabetes duration of more than 1 year were identified. Propensity score matching and inverse probability of treatment weighting analyses with age, sex, diabetes duration, migration background (defined as place of birth outside of Germany or Austria), body mass index, and glycated hemoglobin as covariates were used to account for relevant confounders. Exposures Type 1 diabetes treated with insulin pump therapy or with multiple (≥4) daily insulin injections. Main Outcomes and Measures Primary outcomes were rates of severe hypoglycemia and diabetic ketoacidosis during the most recent treatment year. Secondary outcomes included glycated hemoglobin levels, insulin dose, and body mass index. Results Of 30 579 patients (mean age, 14.1 years [SD, 4.0]; 53% male), 14 119 used pump therapy (median duration, 3.7 years) and 16 460 used insulin injections (median duration, 3.6 years). Patients using pump therapy (n = 9814) were matched with 9814 patients using injection therapy. Pump therapy, compared with injection therapy, was associated with lower rates of severe hypoglycemia (9.55 vs 13.97 per 100 patient-years; difference, −4.42 [95% CI, −6.15 to −2.69]; P < .001) and diabetic ketoacidosis (3.64 vs 4.26 per 100 patient-years; difference, −0.63 [95% CI, −1.24 to −0.02]; P = .04). Glycated hemoglobin levels were lower with pump therapy than with injection therapy (8.04% vs 8.22%; difference, −0.18 [95% CI, −0.22 to −0.13], P < .001). Total daily insulin doses were lower for pump therapy compared with injection therapy (0.84 U/kg vs 0.98 U/kg; difference, −0.14 [−0.15 to −0.13], P < .001). There was no significant difference in body mass index between both treatment regimens. Similar results were obtained after propensity score inverse probability of treatment weighting analyses in the entire cohort. Conclusions and Relevance Among young patients with type 1 diabetes, insulin pump therapy, compared with insulin injection therapy, was associated with lower risks of severe hypoglycemia and diabetic ketoacidosis and with better glycemic control during the most recent year of therapy. These findings provide evidence for improved clinical outcomes associated with insulin pump therapy compared with injection therapy in children, adolescents, and young adults with type 1 diabetes. PMID:29049584

A high-altitude barium radial injection experiment

NASA Technical Reports Server (NTRS)

Wescott, E. M.; Stenbaek-Nielsen, H. C.; Hallinan, T. J.; Deehr, C. S.; Romick, G. J.; Olson, J. V.; Roederer, J. G.; Sydora, R.

1980-01-01

A rocket launched from Poker Flat, Alaska, carried a new type of high-explosive barium shaped charge to 571 km, where detonation injected a thin disk of barium vapor with high velocity nearly perpendicular to the magnetic field. The TV images of the injection are spectacular, revealing three major regimes of expanding plasma which showed early instabilities in the neutral gas. The most unusual effect of the injection is a peculiar rayed barium-ion structure lying in the injection plane and centered on a 5 km 'black hole' surrounding the injection point. Preliminary electrostatic computer simulations show a similar rayed development.

Treatment of hemorrhoids: A coloproctologist's view.

PubMed

Lohsiriwat, Varut

2015-08-21

Hemorrhoids is recognized as one of the most common medical conditions in general population. It is clinically characterized by painless rectal bleeding during defecation with or without prolapsing anal tissue. Generally, hemorrhoids can be divided into two types: internal hemorrhoid and external hemorrhoid. External hemorrhoid usually requires no specific treatment unless it becomes acutely thrombosed or causes patients discomfort. Meanwhile, low-graded internal hemorrhoids can be effectively treated with medication and non-operative measures (such as rubber band ligation and injection sclerotherapy). Surgery is indicated for high-graded internal hemorrhoids, or when non-operative approaches have failed, or complications have occurred. Although excisional hemorrhoidectomy remains the mainstay operation for advanced hemorrhoids and complicated hemorrhoids, several minimally invasive operations (including Ligasure hemorrhoidectomy, doppler-guided hemorrhoidal artery ligation and stapled hemorrhoidopexy) have been introduced into surgical practices in order to avoid post-hemorrhiodectomy pain. This article deals with some fundamental knowledge and current treatment of hemorrhoids in a view of a coloproctologist - which includes the management of hemorrhoids in complicated situations such as hemorrhoids in pregnancy, hemorrhoids in immunocompromised patients, hemorrhoids in patients with cirrhosis or portal hypertension, hemorrhoids in patients having antithrombotic agents, and acutely thrombosed or strangulated hemorrhoids. Future perspectives in the treatment of hemorrhoids are also discussed.

Economic Impact of Ketorolac vs Corticosteroid Intra-Articular Knee Injections for Osteoarthritis: A Randomized, Double-Blind, Prospective Study.

PubMed

Bellamy, Jaime L; Goff, Brandon J; Sayeed, Siraj A

2016-09-01

Knee osteoarthritis is a disabling disease that costs billions of dollars to treat. Corticosteroid gives varying pain relief and costs $12 per injection, whereas ketorolac costs $2 per injection, per institutional costs. The aim of this study was to compare ketorolac with corticosteroid based on pain relief using patient outcome measures and cost data. A total of 35 patients were randomized to ketorolac or corticosteroid intra-articular knee injection in a double-blind, prospective study. Follow-up was 24 weeks. Osteoarthritis was evaluated using Kellgren-Lawrence grading. Visual analog scale (VAS) was the primary outcome measure. A query of the institutional database was performed for International Classification of Diseases, Ninth Revision codes 715.16 and 719.46, and procedure code 20610 over a 3-year period. Two-way, repeated measures analysis of variance and Spearman rank correlation were used for statistical analysis. Mean VAS for ketorolac and corticosteroid decreased significantly from baseline at 2 weeks, 6.3-4.6 and 5.2-3.6, respectively and remained decreased for 24 weeks. There was no correlation between VAS and demographics within treatments. There were 220, 602, and 405 injections performed on patients with the International Classification of Diseases, Ninth Revision codes 715.16 and 719.46 during 2013, 2014, and 2015, respectively. The cost savings per year using ketorolac instead of corticosteroid would be $2259.40, $6182.54, and $4159.35 for 2013, 2014, and 2015, respectively, with a total savings of $12,601.29 over this period. Pain relief was similar between ketorolac and corticosteroid injections. Ketorolac knee injection is safe and effective with a cost savings percentage difference of 143% when compared with corticosteroid. Copyright © 2016 Elsevier Inc. All rights reserved.

Combuston method of oil shale retorting

DOEpatents

Jones, Jr., John B.; Reeves, Adam A.

1977-08-16

A gravity flow, vertical bed of crushed oil shale having a two level injection of air and a three level injection of non-oxygenous gas and an internal combustion of at least residual carbon on the retorted shale. The injection of air and gas is carefully controlled in relation to the mass flow rate of the shale to control the temperature of pyrolysis zone, producing a maximum conversion of the organic content of the shale to a liquid shale oil. The parameters of the operation provides an economical and highly efficient shale oil production.

Researches on direct injection in internal-combustion engines

NASA Technical Reports Server (NTRS)

Tuscher, Jean E

1941-01-01

These researches present a solution for reducing the fatigue of the Diesel engine by permitting the preservation of its components and, at the same time, raising its specific horsepower to a par with that of carburetor engines, while maintaining for the Diesel engine its perogative of burning heavy fuel under optimum economical conditions. The feeding of Diesel engines by injection pumps actuated by engine compression achieves the required high speeds of injection readily and permits rigorous control of the combustible charge introduced into each cylinder and of the peak pressure in the resultant cycle.

Nitrogen spark denoxer

DOEpatents

Ng, Henry K.; Novick, Vincent J.; Sekar, Ramanujam R.

1997-01-01

A NO.sub.X control system for an internal combustion engine includes an oxygen enrichment device that produces oxygen and nitrogen enriched air. The nitrogen enriched air contains molecular nitrogen that is provided to a spark plug that is mounted in an exhaust outlet of an internal combustion engine. As the nitrogen enriched air is expelled at the spark gap of the spark plug, the nitrogen enriched air is exposed to a pulsating spark that is generated across the spark gap of the spark plug. The spark gap is elongated so that a sufficient amount of atomic nitrogen is produced and is injected into the exhaust of the internal combustion engine. The injection of the atomic nitrogen into the exhaust of the internal combustion engine causes the oxides of nitrogen to be reduced into nitrogen and oxygen such that the emissions from the engine will have acceptable levels of NO.sub.X. The oxygen enrichment device that produces both the oxygen and nitrogen enriched air can include a selectively permeable membrane.

Botulinum toxin type A injection into the gastrocnemius muscle for spastic equinus in adults with stroke: a randomized controlled trial comparing manual needle placement, electrical stimulation and ultrasonography-guided injection techniques.

PubMed

Picelli, Alessandro; Tamburin, Stefano; Bonetti, Paola; Fontana, Carla; Barausse, Martina; Dambruoso, Francesca; Gajofatto, Francesca; Santilli, Valter; Smania, Nicola

2012-11-01

The aim of this study was to compare the clinical outcomes of manual needle placement, electrical stimulation, and ultrasonography-guided techniques for botulinum toxin injection into the gastrocnemius of adults with spastic equinus after stroke. After randomization into three groups, each patient received the same dose of botulinum toxin type A into the lateral and medial head of the gastrocnemius muscle (OnabotulinumtoxinA, 100U per head) of the affected leg. The manual needle placement group (n = 15) underwent injections using anatomic landmarks and palpation; the electrical stimulation group (n = 15) received injections with electrical stimulation guidance; and the ultrasonography group (n = 17) was injected under sonographic guidance. The modified Ashworth scale, the Tardieu scale, and the ankle passive range of motion were measured at baseline and 1 mo after injection. Nonparametric statistical analysis was used. One month after injection, the modified Ashworth scale improved better in the ultrasonography group than in the manual needle placement group (P = 0.008). The ankle passive range of motion improved better in the ultrasonography group than in the electrical stimulation (P = 0.004) and manual needle placement (P < 0.001) groups. No difference was found between groups for the Tardieu scale. Ultrasonography-guided injection technique could improve the clinical outcome of botulinum toxin injections into the gastrocnemius of adults with spastic equinus.

Randomized trial of anesthetic methods for intravitreal injections.

PubMed

Blaha, Gregory R; Tilton, Elisha P; Barouch, Fina C; Marx, Jeffrey L

2011-03-01

To compare the effectiveness of four different anesthetic methods for intravitreal injection. Twenty-four patients each received four intravitreal injections using each of four types of anesthesia (proparacaine, tetracaine, lidocaine pledget, and subconjunctival injection of lidocaine) in a prospective, masked, randomized block design. Pain was graded by the patient on a 0 to 10 scale for both the anesthesia and the injection. The average combined pain scores for both the anesthesia and the intravitreal injection were 4.4 for the lidocaine pledget, 3.5 for topical proparacaine, 3.8 for the subconjunctival lidocaine injection, and 4.1 for topical tetracaine. The differences were not significant (P = 0.65). There were also no statistical differences in the individual anesthesia or injection pain scores. Subconjunctival lidocaine injection had the most side effects. Topical anesthesia is an effective method for limiting pain associated with intravitreal injections.

Direct observation of inversion capacitance in p-type diamond MOS capacitors with an electron injection layer

NASA Astrophysics Data System (ADS)

Matsumoto, Tsubasa; Kato, Hiromitsu; Makino, Toshiharu; Ogura, Masahiko; Takeuchi, Daisuke; Yamasaki, Satoshi; Imura, Masataka; Ueda, Akihiro; Inokuma, Takao; Tokuda, Norio

2018-04-01

The electrical properties of Al2O3/p-type diamond (111) MOS capacitors were studied with the goal of furthering diamond-based semiconductor research. To confirm the formation of an inversion layer in the p-type diamond body, an n-type layer for use as a minority carrier injection layer was selectively deposited onto p-type diamond. To form the diamond MOS capacitors, Al2O3 was deposited onto OH-terminated diamond using atomic layer deposition. The MOS capacitor showed clear inversion capacitance at 10 Hz. The minority carrier injection from the n-type layer reached the inversion n-channel diamond MOS field-effect transistor (MOSFET). Using the high-low frequency capacitance method, the interface state density, D it, within an energy range of 0.1-0.5 eV from the valence band edge energy, E v, was estimated at (4-9) × 1012 cm-2 eV-1. However, the high D it near E v remains an obstacle to improving the field effect mobility for the inversion p-channel diamond MOSFET.

High efficiency single transverse mode photonic band crystal lasers with low vertical divergence

NASA Astrophysics Data System (ADS)

Zhao, Shaoyu; Qu, Hongwei; Liu, Yun; Li, Lunhua; Chen, Yang; Zhou, Xuyan; Lin, Yuzhe; Liu, Anjin; Qi, Aiyi; Zheng, Wanhua

2016-10-01

High efficiency 980 nm longitudinal photonic band crystal (PBC) edge emitting laser diodes are designed and fabricated. The calculated results show that eight periods of Al0.1Ga0.9As and Al0.25Ga0.75As layer pairs can reduce the vertical far field divergence to 10.6° full width at half maximum (FWHM). The broad area (BA) lasers show a very high internal quantum efficiency ηi of 98% and low internal loss αi of 1.92 cm-1. Ridge waveguide (RW) lasers with 3 mm cavity length and 5um strip width provide 430 mW stable single transverse mode output at 500 mA injection current with power conversion efficiency (PCE) of 47% under continuous wave (CW) mode. A maximum PCE of 50% is obtained at the 300 mA injection current. A very low vertical far field divergence of 9.4° is obtained at 100 mA injection. At 500 mA injection, the vertical far field divergence increases to 11°, the beam quality factors M2 values are 1.707 in vertical direction and 1.769 in lateral direction.

Anatomy of the Cervicomental Region: Insights From an Anatomy Laboratory and Roundtable Discussion.

PubMed

Kenkel, Jeffrey M; Jones, Derek H; Fagien, Steven; Glaser, Dee Anna; Monheit, Gary D; Stauffer, Karen; Sykes, Jonathan M

2016-11-01

In 2015, ATX-101 (deoxycholic acid injection; Kybella in the United States and Belkyra in Canada; Kythera Biopharmaceuticals, Inc., Westlake Village, CA [an affiliate of Allergan plc, Dublin, Ireland]) was approved as a first-in-class injectable drug for reduction of submental fat. Use of a pharmacologic/injectable therapy within the submental region requires a thorough understanding of cervicomental anatomy to ensure proper injection technique and safe administration. To this end, an anatomy laboratory was conducted to review key external landmarks and important internal anatomic structures that characterize the lower face and anterior neck. External landmarks that define the boundaries of the cervicomental and submental regions were identified including the inferior mandibular border, the anterior border of the sternocleidomastoid muscle, the antegonial notch, the submental crease, the thyroid notch, and the hyoid bone. Relevant internal anatomic structures, including preplatysmal submental fat (the target tissue for ATX-101) and the platysma muscle as well as critical neurovascular and glandular tissues were revealed by dissection. Of particular interest was the marginal mandibular branch of the facial nerve because it typically courses along the inferior mandibular border near the proposed treatment area for ATX-101.

Integration of a Capacitive EIS Sensor into a FIA System for pH and Penicillin Determination

PubMed Central

Rolka, David; Poghossian, Arshak; Schöning, Michael J.

2004-01-01

A field-effect based capacitive EIS (electrolyte-insulator-semiconductor) sensor with a p-Si-SiO2-Ta2O5 structure has been successfully integrated into a commercial FIA (flow-injection analysis) system and system performances have been proven and optimised for pH and penicillin detection. A flow-through cell was designed taking into account the requirement of a variable internal volume (from 12 μl up to 48 μl) as well as an easy replacement of the EIS sensor. FIA parameters (sample volume, flow rate, distance between the injection valve and the EIS sensor) have been optimised in terms of high sensitivity and reproducibility as well as a minimum dispersion of the injected sample zone. An acceptable compromise between different FIA parameters has been found. For the cell design used in this study, best results have been achieved with a flow rate of 1.4 ml/min, distance between the injection valve and the EIS sensor of 6.5 cm, probe volume of 0.75 ml, cell internal volume of 12 μl. A sample throughput of at least 15 samples/h was typically obtained.

Tedizolid Injection

MedlinePlus

... treat skin infections caused by certain types of bacteria. Tedizolid is in a class of medications called ... antibiotics. It works by stopping the growth of bacteria.Antibiotics such as tedizolid injection will not work ...

Determination of erythromycin in human plasma, using column liquid chromatography with a polymeric packing material, alkaline mobile phase and amperometric detection.

PubMed

Nilsson, L G; Walldorf, B; Paulsen, O

1987-12-25

A method based on column liquid chromatography was developed for determination of plasma concentrations of erythromycin. PRP-1, a polymeric type of packing material suitable for chromatography and amperometric detection at high pH, was used. The effect of pH on the column performance and on the electrochemical response was studied. A pH of ca. 10 was found to be optimal. After extraction with tert.-butyl methyl ether, plasma concentrations down to 0.2 mumol/l could be measured, using automated sample injection. Oleandomycin was used as internal standard. The method was used for determination of plasma concentrations in a pharmacokinetic study under steady-state conditions.

INTERNATIONAL CONFERENCE ON SEMICONDUCTOR INJECTION LASERS SELCO-87: Liquid phase epitaxial growth of GaInAsP/InP laser structures

NASA Astrophysics Data System (ADS)

Nohavica, D.; Têminová, J.; Berková, D.; Zagrádková, M.; Kortan, I.; Zelinka, I.; Walachová, I.; Malina, V.

1988-11-01

A modified single-phase liquid phase epitaxy method was developed on the basis of a novel variant of the growth boat. The method was used to grow GaInAsP/InP double heterostructures for lasers emitting at 1.3 and 1.55 μm. The main properties of wide-contact diodes (radiation power and threshold current density) were adopted as the characteristics of the quality of heterostructures characterized by different configurations of active and guiding layers. The quality of the structure was confirmed by the fabrication of laser diodes of the following types: stripe with oxide insulation, clad-ridge waveguide, and double-channel planar buried.

Effects of bacterial lipopolysaccharide on thermoregulation in green anole lizards (Anolis carolinensis).

PubMed

Merchant, Mark; Fleury, Lauren; Rutherford, Renee; Paulissen, Mark

2008-09-15

Fever is a non-specific host defense mechanism that comprises part of the innate immune response. Innate immune function is thought to be an important adaptive immunological response to infection because it occurs across a broad diversity of phyla. Some reptiles can mount a febrile response, despite the fact that their internal body temperatures (T(b)s) are, to some extent, controlled by the environmental temperatures in which they live. This study was undertaken to determine if LPS would induce fever in green anole lizards (Anolis carolinensis). Lizards were maintained in thermal gradients (22-45 degrees C) with a 12-h diurnal cycle. anoles were injected with LPS, pyrogen-free saline, or left untreated, and their T(b)s were recorded every 15min using internal cloacal probes. All lizards showed a diurnal periodicity in T(b) characterized by decreased temperatures during the scotophase (dark hours) and higher temperatures during the photophase (light phase). Anoles injected with LPS exhibited a hypothermic response, relative to untreated and saline-injected animals. The response varied from 2.1 to 4.6 degrees C lower than control lizards. The hypothermic response was initiated within 12-24h of LPS injection, and continued for 3 days after treatment. However, the anapyrexic response was observed primarily during scotophases, with photophase hypothermia observed only on the first day after LPS injection.

Applications of nanocomposites and woodfiber plastics for microcellular injection molding

Treesearch

Lih-Sheng Turng; Mingjun Yuan; Hrishikesh Kharbas; Herman Winata; Daniel F. Caulfield

2003-01-01

The paper reviews the processing advantages and challenges of microcellular injection molding and presents recent research results on applications of nanocomposites and woodfiber-plastic composites as well as new process develop for the microcellular injection molding process. In particular, two types of polyamide (PA-6) neat resins and their filled counterparts, such...

Drastic difference between hole and electron injection through the gradient shell of CdxSeyZn1-xS1-y quantum dots.

PubMed

Abdellah, Mohamed; Poulsen, Felipe; Zhu, Qiushi; Zhu, Nan; Žídek, Karel; Chábera, Pavel; Corti, Annamaria; Hansen, Thorsten; Chi, Qijin; Canton, Sophie E; Zheng, Kaibo; Pullerits, Tõnu

2017-08-31

Ultrafast fluorescence spectroscopy was used to investigate the hole injection in Cd x Se y Zn 1-x S 1-y gradient core-shell quantum dot (CSQD) sensitized p-type NiO photocathodes. A series of CSQDs with a wide range of shell thicknesses was studied. Complementary photoelectrochemical cell measurements were carried out to confirm that the hole injection from the active core through the gradient shell to NiO takes place. The hole injection from the valence band of the QDs to NiO depends much less on the shell thickness when compared to the corresponding electron injection to n-type semiconductor (ZnO). We simulate the charge carrier tunneling through the potential barrier due to the gradient shell by numerically solving the Schrödinger equation. The details of the band alignment determining the potential barrier are obtained from X-ray spectroscopy measurements. The observed drastic differences between the hole and electron injection are consistent with a model where the hole effective mass decreases, while the gradient shell thickness increases.

Determination of a safe INR for joint injections in patients taking warfarin.

PubMed

Bashir, M A; Ray, R; Sarda, P; Li, S; Corbett, S

2015-11-01

With an increase in life expectancy in 'developed' countries, the number of elderly patients receiving joint injections for arthritis is increasing. There are legitimate concerns about an increased risk of thromboembolism if anticoagulation is stopped or reversed for such an injection. Despite being a common dilemma, the literature on this issue is scarce. We undertook 2,084 joint injections of the knee and shoulder in 1,714 patients between August 2008 and December 2013. Within this cohort, we noted 41 patients who were taking warfarin and followed them immediately after joint injection in the clinic or radiology department, looking carefully for complications. Then, we sought clinical follow-up, correspondence, and imaging evidence for 4 weeks, looking for complications from these joint injections. We recorded International Normalised Ratio (INR) values before injection. No complications were associated with the procedure after any joint injection. The radiologists who undertook ultrasound-guided injections to shoulders re-scanned the joints looking for haemarthroses: they found none. A similar outcome was noted clinically after injections in the outpatient setting. With a mean INR of 2.77 (range, 1.7-5.5) and a maximum INR within this group of 5.5, joint injections to the shoulder and knee can be undertaken safely in primary or secondary care settings despite the patient taking warfarin.

Modified constraint-induced movement therapy or bimanual occupational therapy following injection of Botulinum toxin-A to improve bimanual performance in young children with hemiplegic cerebral palsy: a randomised controlled trial methods paper

PubMed Central

2010-01-01

Background Use of Botulinum toxin-A (BoNT-A) for treatment of upper limb spasticity in children with cerebral palsy has become routine clinical practice in many paediatric treatment centres worldwide. There is now high-level evidence that upper limb BoNT-A injection, in combination with occupational therapy, improves outcomes in children with cerebral palsy at both the body function/structure and activity level domains of the International Classification of Functioning, Disability and Health. Investigation is now required to establish what amount and specific type of occupational therapy will further enhance functional outcomes and prolong the beneficial effects of BoNT-A. Methods/Design A randomised, controlled, evaluator blinded, prospective parallel-group trial. Eligible participants were children aged 18 months to 6 years, diagnosed with spastic hemiplegic cerebral palsy and who were able to demonstrate selective motor control of the affected upper limb. Both groups received upper limb injections of BoNT-A. Children were randomised to either the modified constraint-induced movement therapy group (experimental) or bimanual occupational therapy group (control). Outcome assessments were undertaken at pre-injection and 1, 3 and 6 months following injection of BoNT-A. The primary outcome measure was the Assisting Hand Assessment. Secondary outcomes included: the Quality of Upper Extremity Skills Test; Pediatric Evaluation of Disability Inventory; Canadian Occupational Performance Measure; Goal Attainment Scaling; Pediatric Motor Activity Log; modified Ashworth Scale and; the modified Tardieu Scale. Discussion The aim of this paper is to describe the methodology of a randomised controlled trial comparing the effects of modified constraint-induced movement therapy (a uni-manual therapy) versus bimanual occupational therapy (a bimanual therapy) on improving bimanual upper limb performance of children with hemiplegic cerebral palsy following upper limb injection of BoNT-A. The paper outlines the background to the study, the study hypotheses, outcome measures and trial methodology. It also provides a comprehensive description of the interventions provided. Trial Registration ACTRN12605000002684 PMID:20602795

GRIN: “GRoup versus INdividual physiotherapy following lower limb intra-muscular Botulinum Toxin-A injections for ambulant children with cerebral palsy: an assessor-masked randomised comparison trial”: study protocol

PubMed Central

2014-01-01

Background Cerebral palsy is the most common cause of physical disability in childhood. Spasticity is a significant contributor to the secondary impairments impacting functional performance and participation. The most common lower limb spasticity management is focal intramuscular injections of Botulinum Toxin-Type A accompanied by individually-delivered (one on one) physiotherapy rehabilitation. With increasing emphasis on improving goal-directed functional activity and participation within a family-centred framework, it is timely to explore whether physiotherapy provided in a group could achieve comparable outcomes, encouraging providers to offer flexible models of physiotherapy delivery. This study aims to compare individual to group-based physiotherapy following intramuscular Botulinum Toxin-A injections to the lower limbs for ambulant children with cerebral palsy aged four to fourteen years. Methods/Design An assessor-masked, block randomised comparison trial will be conducted with random allocation to either group-based or individual physiotherapy. A sample size of 30 (15 in each study arm) will be recruited. Both groups will receive six hours of direct therapy following Botulinum Toxin-A injections in either an individual or group format with additional home programme activities (three exercises to be performed three times a week). Study groups will be compared at baseline (T1), then at 10 weeks (T2, efficacy) and 26 weeks (T3, retention) post Botulinum Toxin-A injections. Primary outcomes will be caregiver/s perception of and satisfaction with their child’s occupational performance goals (Canadian Occupational Performance Measure) and quality of gait (Edinburgh Visual Gait Score) with a range of secondary outcomes across domains of the International Classification of Disability, Functioning and Health. Discussion This paper outlines the study protocol including theoretical basis, study hypotheses and outcome measures for this assessor-masked, randomised comparison trial comparing group versus individual models of physiotherapy following intramuscular injections of Botulinum Toxin-A to the lower limbs for ambulant children with cerebral palsy. Trial registration ACTRN12611000454976 PMID:24502231

The Impact of Engagement in Street-based Income Generation Activities on Stimulant Drug Use Cessation among People who Inject Drugs

PubMed Central

Ti, Lianping; Richardson, Lindsey; DeBeck, Kora; Nguyen, Paul; Montaner, Julio; Wood, Evan; Kerr, Thomas

2014-01-01

Background Despite the growing prevalence of illicit stimulant drug use internationally, and the widespread involvement of people who inject drugs (IDU) within street-based drug markets, little is known about the impact of different types of street-based income generation activities on the cessation of stimulant use among IDU. Methods Data were derived from an open prospective cohort of IDU in Vancouver, Canada. We used Kaplan-Meier methods and Cox proportional hazards regression to examine the effect of different types of street-based income generation activities (e.g., sex work, drug dealing, and scavenging) on time to cessation of stimulant use. Results Between December, 2005 and November, 2012, 887 IDU who use stimulant drugs (cocaine, crack cocaine, or crystal methamphetamine) were prospectively followed-up for a median duration of 47 months. In Kaplan-Meier analyses, compared to those who did not engage in street-based income generation activities, participants who reported sex work, drug dealing, scavenging, or more than one of these activities were significantly less likely to report stimulant drug use cessation (all p<0.001). When considered as time-updated variables and adjusted for potential confounders in a multivariable model, each type of street-based income generation activity remained significantly associated with a slower time to stimulant drug cessation (all p<0.005). Conclusions Our findings highlight the urgent need for strategies to address stimulant dependence, including novel pharmacotherapies. Also important, structural interventions, such as low-threshold employment opportunities, availability of supportive housing, legal reforms regarding drug use, and evidence-based approaches that reduce harm among IDU are urgently required. PMID:24909853

The impact of engagement in street-based income generation activities on stimulant drug use cessation among people who inject drugs.

PubMed

Ti, Lianping; Richardson, Lindsey; DeBeck, Kora; Nguyen, Paul; Montaner, Julio; Wood, Evan; Kerr, Thomas

2014-08-01

Despite the growing prevalence of illicit stimulant drug use internationally, and the widespread involvement of people who inject drugs (IDU) within street-based drug markets, little is known about the impact of different types of street-based income generation activities on the cessation of stimulant use among IDU. Data were derived from an open prospective cohort of IDU in Vancouver, Canada. We used Kaplan-Meier methods and Cox proportional hazards regression to examine the effect of different types of street-based income generation activities (e.g., sex work, drug dealing, and scavenging) on time to cessation of stimulant use. Between December, 2005 and November, 2012, 887 IDU who use stimulant drugs (cocaine, crack cocaine, or crystal methamphetamine) were prospectively followed-up for a median duration of 47 months. In Kaplan-Meier analyses, compared to those who did not engage in street-based income generation activities, participants who reported sex work, drug dealing, scavenging, or more than one of these activities were significantly less likely to report stimulant drug use cessation (all p<0.001). When considered as time-updated variables and adjusted for potential confounders in a multivariable model, each type of street-based income generation activity remained significantly associated with a slower time to stimulant drug cessation (all p<0.005). Our findings highlight the urgent need for strategies to address stimulant dependence, including novel pharmacotherapies. Also important, structural interventions, such as low-threshold employment opportunities, availability of supportive housing, legal reforms regarding drug use, and evidence-based approaches that reduce harm among IDU are urgently required. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Serotonin-induced hypophagia is mediated via α2 and β2 adrenergic receptors in neonatal layer-type chickens.

PubMed

Zendehdel, M; Sardari, F; Hassanpour, S; Rahnema, M; Adeli, A; Ghashghayi, E

2017-06-01

1. Serotoninergic and adrenergic systems play crucial roles in feed intake regulation in avians but there is no report on possible interactions among them. So, in this study, 5 experiments were designed to evaluate the interaction of central serotonergic and adrenergic systems on food intake regulation in 3 h food deprived (FD 3 ) neonatal layer-type chickens. 2. In Experiment 1, chickens received intracerebroventricular (ICV) injection of control solution, serotonin (56.74 nmol), prazosin (α 1 receptor antagonist, 10 nmol) and co-injection of serotonin plus prazosin. In Experiment 2, control solution, serotonin (56.74 nmol), yohimbine (α 2 receptor antagonist, 13 nmol) and co-injection of serotonin plus yohimbine were used. In Experiment 3, the birds received control solution, serotonin (56.74 nmol), metoprolol (β 1 receptor antagonist, 24 nmol) and co-injection of serotonin plus metoprolol. In Experiment 4, injections were control solution, serotonin (56.74 nmol), ICI 118.551 (β 2 receptor antagonist, 5 nmol) and serotonin plus ICI 118.551. In Experiment 5, control solution, serotonin (56.74 nmol), SR59230R (β 3 receptor antagonist, 20 nmol) and co-administration of serotonin and SR59230R were injected. In all experiments the cumulative food intake was measured until 120 min post injection. 3. The results showed that ICV injection of serotonin alone decreased food intake in chickens. A combined injection of serotonin plus ICI 118.551 significantly attenuated serotonin-induced hypophagia. Also, co-administration of serotonin and yohimbine significantly amplified the hypophagic effect of serotonin. However, prazosin, metoprolol and SR59230R had no effect on serotonin-induced hypophagia in chickens. 4. These results suggest that serotonin-induced feeding behaviour is probably mediated via α 2 and β 2 adrenergic receptors in neonatal layer-type chicken.

The role of orexin type-1 receptors in the development of morphine tolerance in locus coeruleus neurons: An electrophysiological perspective.

PubMed

Abdollahi, Hakime; Ghaemi-Jandabi, Masoumeh; Azizi, Hossein; Semnanian, Saeed

2016-09-01

Long-term exposure to opioid agonists results in tolerance to their analgesic effects, so the effectiveness of opioid agonists in the management of pain becomes limited. The locus coeruleus (LC) nucleus has been involved in the development of tolerance to opiates. Orexin type-1 receptors (OX1Rs) are highly expressed in LC nucleus. Orexin plays a noteworthy role in the occurrence of morphine tolerance. The purpose of the present study is to investigate the role of orexin type-1 receptors in the development of morphine tolerance in LC neurons. In this study, adult male Wistar rats weighing 250-300g were utilized. Induction of morphine tolerance was obtained by single injection of morphine per day for 6 successive days. An orexin type-1 receptor antagonist (SB-334867) was injected into the lateral ventricle instantly prior to morphine injection. On day 7, the effect of morphine on the electrical activity of LC neurons was studied using in vivo extracellular single unit recording. The results demonstrate that morphine injection for 6 consecutive days led to the development of morphine-induced tolerance in LC neurons. In other words, there was a significant decrease in LC neuronal responsiveness to morphine injection. Inhibitory responses of LC neurons to intraperitoneally applied morphine can be observed with the treatment of the SB-334867 prior to morphine injection. This study showed that OX1R blockade by SB-334867 prevents the development of morphine tolerance in LC neurons. We hope that further studies will lead to considerable progress in understanding the molecular adaptations that contribute to morphine tolerance. Copyright © 2016 Elsevier B.V. All rights reserved.

CALIOP-based Biomass Burning Smoke Plume Injection Height

NASA Astrophysics Data System (ADS)

Soja, A. J.; Choi, H. D.; Fairlie, T. D.; Pouliot, G.; Baker, K. R.; Winker, D. M.; Trepte, C. R.; Szykman, J.

2017-12-01

Carbon and aerosols are cycled between terrestrial and atmosphere environments during fire events, and these emissions have strong feedbacks to near-field weather, air quality, and longer-term climate systems. Fire severity and burned area are under the control of weather and climate, and fire emissions have the potential to alter numerous land and atmospheric processes that, in turn, feedback to and interact with climate systems (e.g., changes in patterns of precipitation, black/brown carbon deposition on ice/snow, alteration in landscape and atmospheric/cloud albedo). If plume injection height is incorrectly estimated, then the transport and deposition of those emissions will also be incorrect. The heights to which smoke is injected governs short- or long-range transport, which influences surface pollution, cloud interaction (altered albedo), and modifies patterns of precipitation (cloud condensation nuclei). We are working with the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) science team and other stakeholder agencies, primarily the Environmental Protection Agency and regional partners, to generate a biomass burning (BB) plume injection height database using multiple platforms, sensors and models (CALIOP, MODIS, NOAA HMS, Langley Trajectory Model). These data have the capacity to provide enhanced smoke plume injection height parameterization in regional, national and international scientific and air quality models. Statistics that link fire behavior and weather to plume rise are crucial for verifying and enhancing plume rise parameterization in local-, regional- and global-scale models used for air quality, chemical transport and climate. Specifically, we will present: (1) a methodology that links BB injection height and CALIOP air parcels to specific fires; (2) the daily evolution of smoke plumes for specific fires; (3) plumes transport and deposited on the Greenland Ice Sheet; and (4) compare CALIOP-derived smoke plume injection to CMAQ modeled smoke plume injection. These results have the potential to provide value to national and international modeling communities (scientific and air quality) and to public land, fire, and air quality management and regulations communities.

Visualisation of diesel injector with neutron imaging

NASA Astrophysics Data System (ADS)

Lehmann, E.; Grünzweig, C.; Jollet, S.; Kaiser, M.; Hansen, H.; Dinkelacker, F.

2015-12-01

The injection process of diesel engines influences the pollutant emissions. The spray formation is significantly influenced by the internal flow of the injector. One of the key parameters here is the generation of cavitation caused by the geometry and the needle lift. In modern diesel engines the injection pressure is established up to 3000 bar. The details of the flow and phase change processes inside the injector are of increasing importance for such injectors. With these experimental measurements the validation of multiphase and cavitation models is possible for the high pressure range. Here, for instance, cavitation effects can occur. Cavitation effects in the injection port area destabilize the emergent fuel jet and improve the jet break-up. The design of the injection system in direct-injection diesel engines is an important challenge, as the jet breakup, the atomization and the mixture formation in the combustion chamber are closely linked. These factors have a direct impact on emissions, fuel consumption and performance of an engine. The shape of the spray at the outlet is determined by the internal flow of the nozzle. Here, geometrical parameters, the injection pressure, the injection duration and the cavitation phenomena play a major role. In this work, the flow dependency in the nozzles are analysed with the Neutron-Imaging. The great advantage of this method is the penetrability of the steel structure while a high contrast to the fuel is given due to the interaction of the neutrons with the hydrogen amount. Compared to other methods (optical with glass structures) we can apply real components under highest pressure conditions. During the steady state phase of the injection various cavitation phenomena are visible in the injector, being influenced by the nozzle geometry and the fuel pressure. Different characteristics of cavitation in the sac and spray hole can be detected, and the spray formation in the primary breakup zone is influenced.

Trastuzumab Injection

MedlinePlus

... with other medications to treat certain types of stomach cancer that have spread to other parts of the ... weeks. When trastuzumab injection is used to treat stomach cancer, it is usually given once every 3 weeks. ...

Investigation of nozzle flow and cavitation characteristics in a diesel injector.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Som, S.; Ramirez, A.; Aggarwal, S.

2010-04-01

Cavitation and turbulence inside a diesel injector play a critical role in primary spray breakup and development processes. The study of cavitation in realistic injectors is challenging, both theoretically and experimentally, since the associated two-phase flow field is turbulent and highly complex, characterized by large pressure gradients and small orifice geometries. We report herein a computational investigation of the internal nozzle flow and cavitation characteristics in a diesel injector. A mixture based model in FLUENT V6.2 software is employed for simulations. In addition, a new criterion for cavitation inception based on the total stress is implemented, and its effectiveness inmore » predicting cavitation is evaluated. Results indicate that under realistic diesel engine conditions, cavitation patterns inside the orifice are influenced by the new cavitation criterion. Simulations are validated using the available two-phase nozzle flow data and the rate of injection measurements at various injection pressures (800-1600 bar) from the present study. The computational model is then used to characterize the effects of important injector parameters on the internal nozzle flow and cavitation behavior, as well as on flow properties at the nozzle exit. The parameters include injection pressure, needle lift position, and fuel type. The propensity of cavitation for different on-fleet diesel fuels is compared with that for n-dodecane, a diesel fuel surrogate. Results indicate that the cavitation characteristics of n-dodecane are significantly different from those of the other three fuels investigated. The effect of needle movement on cavitation is investigated by performing simulations at different needle lift positions. Cavitation patterns are seen to shift dramatically as the needle lift position is changed during an injection event. The region of significant cavitation shifts from top of the orifice to bottom of the orifice as the needle position is changed from fully open (0.275 mm) to nearly closed (0.1 mm), and this behavior can be attributed to the effect of needle position on flow patterns upstream of the orifice. The results demonstrate the capability of the cavitation model to predict cavitating nozzle flows in realistic diesel injectors and provide boundary conditions, in terms of vapor fraction, velocity, and turbulence parameters at the nozzle exit, which can be coupled with the primary breakup simulation.« less

Identifying clinical criteria to predict Type 1 diabetes, as defined by absolute insulin deficiency: a systematic review protocol.

PubMed

Shields, Beverley M; Peters, Jaime L; Cooper, Chris; Powell, Roy J; Knight, Bridget A; Hyde, Christopher; Hattersley, Andrew T

2012-01-01

Management of a patient's diabetes is entirely dependent upon the type of diabetes they are deemed to have. Patients with Type 1 diabetes are insulin deficient so require multiple daily insulin injections, whereas patients with Type 2 diabetes still have some endogenous insulin production so insulin treatment is only required when diet and tablets do not establish good glycaemic control. Despite the importance of a correct diagnosis, classification of diabetes is based on aetiology and relies on clinical judgement. There are no clinical guidelines on how to determine whether a patient has Type 1 or Type 2 diabetes. We aim to systematically review the literature to derive evidence-based clinical criteria for the classification of the major subtypes of diabetes. We will perform a systematic review of diagnostic accuracy studies to establish clinical criteria that predict the subsequent development of absolute insulin deficiency seen in Type 1 diabetes. Insulin deficiency will be determined by reference standard C-peptide concentrations. Synthesis of criteria identified will be undertaken using hierarchical summary receiver operating characteristic curves. As this is a systematic review, there will be no ethical issues. We will disseminate results by writing up the final systematic review and synthesis for publication in a peer-reviewed journal and will present at national and international diabetes-related meetings.

Continuous subcutaneous insulin infusion versus multiple daily injections in individuals with type 1 diabetes: a systematic review and meta-analysis.

PubMed

Benkhadra, Khalid; Alahdab, Fares; Tamhane, Shrikant U; McCoy, Rozalina G; Prokop, Larry J; Murad, Mohammad Hassan

2017-01-01

The relative efficacy of continuous subcutaneous insulin infusion and multiple daily injections in individuals with type 1 diabetes is unclear. We sought to synthesize the existing evidence about the effect of continuous subcutaneous insulin infusion on glycosylated hemoglobin, hypoglycemic events, and time spent in hypoglycemia compared to multiple daily injections. We searched MEDLINE, EMBASE, Cochrane Central Register of Controlled Trials and Database of Systematic Reviews, and Scopus from January 2008 through November 2015 for randomized controlled trials that enrolled children or adults with type 1 diabetes. Trials identified in a previous systematic review and published prior to 2008 were also included. We included 25 randomized controlled trials at moderate risk of bias. Meta-analysis showed a significant reduction in glycosylated hemoglobin in patients treated with continuous subcutaneous insulin infusion compared to multiple daily injections (mean difference 0.37; 95 % confidence interval, 0.24-0.51). This effect was demonstrated in both children and adults. There was no significant difference in minor or severe hypoglycemic events. Continuous subcutaneous insulin infusion was associated with lower incidence of nocturnal hypoglycemia. There was no significant difference in the time spent in hypoglycemia. In children and adults with type 1 diabetes and compared to multiple daily injections, continuous subcutaneous insulin infusion is associated with a modest reduction in glycosylated hemoglobin. There was no difference in severe or minor hypoglycemia, but likely a lower incidence of nocturnal hypoglycemia with continuous subcutaneous insulin infusion.

Preparation, characterization, and immunogenicity of Haemophilus influenzae type b polysaccharide-protein conjugates

PubMed Central

1980-01-01

A method is presented for covalently bonding Haemophilus influenzae type b capsular polysaccharide (HIB Ps) to several proteins. The method is efficient and relies upon the use of adipic dihydrazide as a spacer between the capsular polysaccharide and the carrier protein. In contrast to the poor immunogenicity of the purified HIB Ps in mice and rabbits, the HIB Ps-protein conjugates induced serum anti-type b antibodies having bactericidal activity at levels shown to be protective in humans when low doses were injected subcutaneously in a saline solution. The antibody response in mice was related to the dose of the conjugates, increased with the number of injections, and could be primed by the previous injection of the carrier protein. The HIB Ps- protein conjugates were immunogenic in three different mouse strains. The importance of the carrier molecule for the enhanced immunogenicity of the HIB Ps-protein conjugates was shown by the failure of HIB Ps hybrids prepared with either the homologous polysaccharide or pneumococcus type 3 polysaccharide to induce antibodie in mice. Rabbits injected with the HIB Ps-protein conjugates emulsified in Freund's adjuvant produced high levels of serum anti-type b antibodies which induced a bactericidal effect upon H. influenzae type b organisms. It is proposed that the HIB Ps component of the polysaccharide protein conjugates has been converted to a thymic-dependent immunogen. This method may be used to prepare protein-polysaccharide conjugates with HIB Ps and other polysaccharides to be considered for human use. PMID:6967514

Polarized deuterium internal target at AmPS (NIKHEF)

NASA Astrophysics Data System (ADS)

Ferro-Luzzi, M.; Zhou, Z.-L.; van den Brand, J. F. J.; Bulten, H. J.; Alarcon, R.; van Bakel, N.; Botto, T.; Bouwhuis, M.; van Buuren, L.; Comfort, J.; Doets, M.; Dolfini, S.; Ent, R.; Geurts, D.; Heimberg, P.; Higinbotham, D. W.; de Jager, C. W.; Lang, J.; de Lange, D. J.; Norum, B.; Passchier, I.; Poolman, H. R.; Six, E.; Steijger, J.; Szczerba, D.; Unal, O.; de Vries, H.

1998-01-01

We describe the polarized deuterium target internal to the NIKHEF medium-energy electron storage ring. Tensor polarized deuterium was produced in an atomic beam source and injected into a storage cell target. A Breit-Rabi polarimeter was used to monitor the injected atomic beam intensity and polarization. An electrostatic ion-extraction system and a Wien filter were utilized to measure on-line the atomic fraction of the target gas in the storage cell. This device was supplemented with a tensor polarization analyzer using the neutron anisotropy of the 3H(d,n)α reaction at 60 keV. This method allows determining the density-averaged nuclear polarization of the target gas, independent of spatial and temporal variations. We address issues important for polarized hydrogen/deuterium internal targets, such as the effects of spin-exchange collisions and resonant transitions induced by the RF fields of the charged particle beam.

Polarized deuterium internal target at AmPS (NIKHEF)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Norum, Blaine; De Jager, Cornelis; Geurts, D.

1997-08-01

We describe the polarized deuterium target internal to the NIKHEF medium-energy electron storage ring. Tensor polarized deuterium was produced in an atomic beam source and injected into a storage cell target. A Breit-Rabi polarimeter was used to monitor the injected atomic beam intensity and polarization. An electrostatic ion-extraction system and a Wien filter were utilized to measure on-line the atomic fraction of the target gas in the storage cell. This device was supplemented with a tensor polarization analyzer using the neutron anisotropy of the 3H(d,n)sigma reaction at 60 keV. This method allows determining the density-averaged nuclear polarization of the targetmore » gas, independent of spatial and temporal variations. We address issues important for polarized hydrogen/deuterium internal targets, such as the effects of spin-exchange collisions and resonant transitions induced by the RF fields of the charged particle beam.« less

Polarized deuterium internal target at AmPS (NIKHEF)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ferro-Luzzi, M.; NIKHEF, P.O. Box 41882, 1009 DB Amsterdam; Zhou, Z.-L.

1998-01-20

We describe the polarized deuterium target internal to the NIKHEF medium-energy electron storage ring. Tensor polarized deuterium was produced in an atomic beam source and injected into a storage cell target. A Breit-Rabi polarimeter was used to monitor the injected atomic beam intensity and polarization. An electrostatic ion-extraction system and a Wien filter were utilized to measure on-line the atomic fraction of the target gas in the storage cell. This device was supplemented with a tensor polarization analyzer using the neutron anisotropy of the {sup 3}H(d,n){alpha} reaction at 60 keV. This method allows determining the density-averaged nuclear polarization of themore » target gas, independent of spatial and temporal variations. We address issues important for polarized hydrogen/deuterium internal targets, such as the effects of spin-exchange collisions and resonant transitions induced by the RF fields of the charged particle beam.« less

Ion-implanted epitaxially grown ZnSe

NASA Technical Reports Server (NTRS)

Chernow, F.

1975-01-01

The use of ZnSe to obtain efficient, short wavelength injection luminescence was investigated. It was proposed that shorter wavelength emission and higher efficiency be achieved by employing a p-i-n diode structure rather than the normal p-n diode structure. The intervening i layer minimizes concentration quenching effects and the donor-acceptor pair states leading to long wavelength emission. The surface p layer was formed by ion implantation; implantation of the i layer rather than the n substrate permits higher, uncompensated p-type doping. An ion implanted p-n junction in ZnSe is efficiency-limited by high electron injection terminating in nonradiative recombination at the front surface, and by low hole injection resulting from the inability to obtain high conductivity p-type surface layers. While the injection ratio in p-n junctions was determined by the radio of majority carrier concentrations, the injection ratio in p-i-n structures was determined by the mobility ratios and/or space charge neutrality requirements in the i layer.

Design of p-type cladding layers for tunnel-injected UV-A light emitting diodes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Yuewei; Krishnamoorthy, Sriram; Akyol, Fatih

Here, we discuss the engineering of p-AlGaN cladding layers for achieving efficient tunnel-injected III-Nitride ultraviolet light emitting diodes (UV LEDs) in the UV-A spectral range. We show that the capacitance-voltage measurements can be used to estimate the compensation and doping in the p-AlGaN layers located between the multi-quantum well region and the tunnel junction layer. By increasing the p-type doping concentration to overcome the background compensation, on-wafer external quantum efficiency and wall-plug efficiency of 3.37% and 1.62%, respectively, were achieved for the tunnel-injected UV LEDs emitting at 325 nm. We also show that interband tunneling hole injection can be usedmore » to realize UV LEDs without any acceptor doping. The work discussed here provides new understanding of hole doping and transport in AlGaN-based UV LEDs and demonstrates the excellent performance of tunnel-injected LEDs for the UV-A wavelength range.« less

Design of p-type cladding layers for tunnel-injected UV-A light emitting diodes

DOE PAGES

Zhang, Yuewei; Krishnamoorthy, Sriram; Akyol, Fatih; ...

2016-11-09

Here, we discuss the engineering of p-AlGaN cladding layers for achieving efficient tunnel-injected III-Nitride ultraviolet light emitting diodes (UV LEDs) in the UV-A spectral range. We show that the capacitance-voltage measurements can be used to estimate the compensation and doping in the p-AlGaN layers located between the multi-quantum well region and the tunnel junction layer. By increasing the p-type doping concentration to overcome the background compensation, on-wafer external quantum efficiency and wall-plug efficiency of 3.37% and 1.62%, respectively, were achieved for the tunnel-injected UV LEDs emitting at 325 nm. We also show that interband tunneling hole injection can be usedmore » to realize UV LEDs without any acceptor doping. The work discussed here provides new understanding of hole doping and transport in AlGaN-based UV LEDs and demonstrates the excellent performance of tunnel-injected LEDs for the UV-A wavelength range.« less

Reconstruction of Craniomaxillofacial Bone Defects Using Tissue-Engineering Strategies with Injectable and Non-Injectable Scaffolds

PubMed Central

Gaihre, Bipin; Uswatta, Suren; Jayasuriya, Ambalangodage C.

2017-01-01

Engineering craniofacial bone tissues is challenging due to their complex structures. Current standard autografts and allografts have many drawbacks for craniofacial bone tissue reconstruction; including donor site morbidity and the ability to reinstate the aesthetic characteristics of the host tissue. To overcome these problems; tissue engineering and regenerative medicine strategies have been developed as a potential way to reconstruct damaged bone tissue. Different types of new biomaterials; including natural polymers; synthetic polymers and bioceramics; have emerged to treat these damaged craniofacial bone tissues in the form of injectable and non-injectable scaffolds; which are examined in this review. Injectable scaffolds can be considered a better approach to craniofacial tissue engineering as they can be inserted with minimally invasive surgery; thus protecting the aesthetic characteristics. In this review; we also focus on recent research innovations with different types of stem-cell sources harvested from oral tissue and growth factors used to develop craniofacial bone tissue-engineering strategies. PMID:29156629

75 FR 26647 - Implantation or Injectable Dosage Form New Animal Drugs; Ivermectin

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-12

... solution in cattle and swine for treatment and control of various internal and external parasites. DATES... Veterinary Medicine (HFV-170), Food and Drug Administration, 7500 Standish Pl., Rockville, MD 20855, 240-276... and swine for treatment and control of various internal and external parasites. Sparhawk Laboratories...

Jet plume injection and combustion system for internal combustion engines

DOEpatents

Oppenheim, A.K.; Maxson, J.A.; Hensinger, D.M.

1993-12-21

An improved combustion system for an internal combustion engine is disclosed wherein a rich air/fuel mixture is furnished at high pressure to one or more jet plume generator cavities adjacent to a cylinder and then injected through one or more orifices from the cavities into the head space of the cylinder to form one or more turbulent jet plumes in the head space of the cylinder prior to ignition of the rich air/fuel mixture in the cavity of the jet plume generator. The portion of the rich air/fuel mixture remaining in the cavity of the generator is then ignited to provide a secondary jet, comprising incomplete combustion products which are injected into the cylinder to initiate combustion in the already formed turbulent jet plume. Formation of the turbulent jet plume in the head space of the cylinder prior to ignition has been found to yield a higher maximum combustion pressure in the cylinder, as well as shortening the time period to attain such a maximum pressure. 24 figures.

Jet plume injection and combustion system for internal combustion engines

DOEpatents

Oppenheim, Antoni K.; Maxson, James A.; Hensinger, David M.

1993-01-01

An improved combustion system for an internal combustion engine is disclosed wherein a rich air/fuel mixture is furnished at high pressure to one or more jet plume generator cavities adjacent to a cylinder and then injected through one or more orifices from the cavities into the head space of the cylinder to form one or more turbulent jet plumes in the head space of the cylinder prior to ignition of the rich air/fuel mixture in the cavity of the jet plume generator. The portion of the rich air/fuel mixture remaining in the cavity of the generator is then ignited to provide a secondary jet, comprising incomplete combustion products which are injected into the cylinder to initiate combustion in the already formed turbulent jet plume. Formation of the turbulent jet plume in the head space of the cylinder prior to ignition has been found to yield a higher maximum combustion pressure in the cylinder, as well as shortening the time period to attain such a maximum pressure.

9 CFR 113.455 - Clostridium Perfringens Type D Antitoxin.

Code of Federal Regulations, 2011 CFR

2011-01-01

... cause sickness or death in injected mice. (iii) L + dose. The smallest quantity of toxin which can be mixed with one-tenth unit of Standard Antitoxin and cause death in at least 80 percent of injected mice... until injections of mice can be made. (vi) Five Swiss white mice, each weighing 16-20 grams, shall be...

9 CFR 113.111 - Clostridium Perfringens Type C Toxoid and Bacterin-Toxoid.

Code of Federal Regulations, 2011 CFR

2011-01-01

... mixed with one unit of Standard Antitoxin and not cause sickness or death in injected mice. (iii) L... death in at least 80 percent of injected mice. (iv) Standard antitoxin. The Beta Antitoxin preparation... toxin-antitoxin mixtures at room temperature for 1 hour and hold in ice water until injections of mice...

[Onyx embolization for treatment of dural arteriovenous fistula: comparison of long- distance versus routine injection method].

PubMed

He, Xiao-Yan; Zhang, Guo-Zhong; Li, Ming-Zhou; Wang, Gang; Liu, Dan; Qi, Song-Tao; Li, Wei-Guang; Feng, Wen-Feng

2016-03-01

To compare the efficacy, clinical characteristics, safety, injection time and radiation exposure of Onyx embolization using a long-distance injection method and routine injection method for management of dural arteriovenous fistula (DAVF). The clinical data were retrospectively analyzed in 59 patients with DAVF treated with Onyx embolization using long-distance injection method (28 patients) and routine injection method (31 patients). The efficacy, safety, injection time and radiation exposure during Onyx embolization were compared between the two injections methods. The average radiation dose exposure to the surgeon per procedure was significantly lower in the long-distance injection group than in the routine group. The injection time (P=0.53), injection volume (P=0.78), number of supply arteries (P=0.80), Cognard types (P=0.67), and effect of embolization (P=0.88) were all similar between the two groups. Endovaseular treatment of intracranial DAVF with Onyx embolization using the long-distance injection method is feasible, safe and effective and can reduce the radiation exposure to the surgeon.

Dramatic changes in muscle contractile and structural properties after 2 botulinum toxin injections.

PubMed

Minamoto, Viviane B; Suzuki, Kentaro P; Bremner, Shannon N; Lieber, Richard L; Ward, Samuel R

2015-10-01

Botulinum toxin is frequently administered serially to maintain therapeutic muscle paralysis, but the effect of repeated doses on muscle function are largely unknown. This study characterized the muscle response to 2 onabotulinum toxin (BoNT) injections separated by 3 months. Animal subjects received a single toxin injection (n = 8), 2 BoNT injections separated by 3 months (n = 14), or 1 BoNT and 1 saline injection separated by 3 months (n = 8). The functional effect of 2 serial injections was exponentially greater than the effect of a single injection. While both groups treated with a single BoNT injection had decreased torque in the injected leg by approximately 50% relative to contralateral legs, the double BoNT injected group had decreased torque by over 95% relative to the preinjection level. Both single and double BoNT injections produced clear signs of fiber-type grouping. These experiments demonstrate a disproportionately greater effect of repeated BoNT injections. © 2015 Wiley Periodicals, Inc.

A subgroup-specific evaluation of the efficacy of intraarticular triamcinolone hexacetonide in juvenile chronic arthritis.

PubMed

Breit, W; Frosch, M; Meyer, U; Heinecke, A; Ganser, G

2000-11-01

To determine the subgroup-specific differences of intraarticular triamcinolone hexacetonide (TH) in the treatment of joint inflammation in patients with juvenile chronic arthritis (JCA). A retrospective review of 194 children of all subgroups of JCA, treated by a single or repeated TH injection between 1989 to 1994. Efficacy and duration of benefit were evaluated after a mean duration of 3, 15, 30, and 64 weeks. In all, 1439 TH injections were given to 194 patients; 368 of these were reinjections. The median duration of improvement of all injections was 74 weeks. Responses were significantly different among subgroups (p = 0.0001): there were 121 weeks of efficacy in early-onset pauciarticular JCA type I (223 injections), 47 weeks in late-onset pauciarticular JCA type II (190 injections), 105 weeks in rheumatoid factor negative polyarticular JCA (445 injections), 63 weeks in rheumatoid factor positive polyarticular JCA (127 injections), and 36 weeks in systemic JCA (413 injections). Forty-one injections were done in other rheumatic diseases. In relation to this result there were also differences with regard to joint groups, antinuclear antibody (ANA) and HLA-B27 status, and sex. Side effects were rare: infections of skin or joints were not noted; skin and lipoatrophy were seen after 15 injections, necrosis of the hip in one case, luxation of 2 shoulders of one patient, and periarticular calcification in 3 patients. Intraarticular TH is an effective therapy for inflammatory joint disease in all subgroups of JCA. The risk of major complications is low. The median duration of improvement depends on the subgroup of the disease.

Injection Force of SoloSTAR® Compared with Other Disposable Insulin Pen Devices at Constant Volume Flow Rates

PubMed Central

van der Burg, Thomas

2011-01-01

Background Injection force is a particularly important practical aspect of therapy for patients with diabetes, especially those who have dexterity problems. This laboratory-based study compared the injection force of the SoloSTAR® insulin pen (SoloSTAR; sanofi-aventis) versus other available disposable pens at injection speeds based on the delivered volume of insulin released at the needle. Method Four different prefilled disposable pens were tested: SoloSTAR containing insulin glargine; FlexPen® and the Next Generation FlexPen® (NGFP) (Novo Nordisk), both containing insulin detemir; and KwikPen® containing insulin lispro (Eli Lilly). All pens were investigated using the maximum dispense volume for each pen type [80 units (U) for SoloSTAR; 60 U for the other pens], from the free needle tip dispensing into a beaker. Twenty pens of each type were fitted with the recommended needles and tested at two dose speeds (6 and 10 U/s); each pen was tested twice. Results Mean plateau injection force and maximum injection force were consistently lower with SoloSTAR compared with FlexPen, NGFP, and KwikPen at both injection speeds tested. An injection speed of 10 U/s was associated with higher injection force compared with 6 U/s for all the pens tested (p < .001). Conclusions SoloSTAR stands out because of its low injection force, even when compared with newer insulin pen devices such as the KwikPen and NGFP. This may enable patients, especially those with dexterity problems, to administer insulin more easily and improve management of their diabetes. PMID:21303637

Intramyocardial bone marrow mononuclear cell transplantation in ischemic heart failure: Long-term follow-up.

PubMed

Lehtinen, Miia; Pätilä, Tommi; Kankuri, Esko; Lauerma, Kirsi; Sinisalo, Juha; Laine, Mika; Kupari, Markku; Vento, Antti; Harjula, Ari

2015-07-01

Long-term results regarding treatment of chronic ischemic heart failure with bone marrow mononuclear cells (BMMCs) have been few. We received encouraging results at the 1-year follow-up of patients treated with combined coronary artery bypass grafting (CABG) and BMMCs, so we decided to extend the follow-up. The study patients had received injections of BMMCs or vehicle into the myocardial infarction border area during CABG in a randomized and double-blind manner. We could contact 36 of the 39 patients recruited for the original study. Pre-operatively and after an extended follow-up period, we performed magnetic resonance imaging, measured pro-B-type amino-terminal natriuretic peptide, reviewed patient records from the follow-up period, and determined current quality of life with the Medical Outcomes Study Short-Form 36 (SF-36) Health Survey. The median follow-up time was 60.7 months (interquartile range [IQR], 45.1-72.6 months). No statistically significant difference was detected in change of pro-B-type amino-terminal natriuretic peptide values or in quality of life between groups. The median change in left ventricular ejection fraction was 4.9% (IQR, -2.1% to 12.3%) for controls and 3.9% (IQR, -5.2% to 10.2%) for the BMMC group (p = 0.647). Wall thickening in injected segments increased by a median of 17% (IQR, -5% to 30%) for controls and 15% (IQR, -12% to 19%) for BMMC patients (p = 0.434). Scar size in injected segments increased by a median of 2% (IQR, -7% to 19%) for controls but diminished for BMMC patients, with a median change of -17% (IQR, -30% to -6%; p = 0.011). In the treatment of chronic ischemic heart failure, combining intramyocardial BMMC therapy with CABG fails to affect cardiac function but can sustainably reduce scar size, even in the long-term. Copyright © 2015 International Society for Heart and Lung Transplantation. Published by Elsevier Inc. All rights reserved.

Effects of powder characteristics on injection molding and burnout cracking

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bandyopadhyay, G.; French, K.W.

Silicon nitride particle size and size distributions were varied widely to determine their effects on burnout cracking of injection-molded test parts containing thick and thin sections. Elimination of internal cracking required significant burnout shrinkage, which did not occur by changes of particle size and size distribution. However, isopressing of test parts after burnout provided the dimensional shrinkage necessary for producing crack-free components.

Demonstration of frequency control and CW diode laser injection control of a titanium-doped sapphire ring laser with no internal optical elements

NASA Technical Reports Server (NTRS)

Bair, Clayton H.; Brockman, Philip; Hess, Robert V.; Modlin, Edward A.

1988-01-01

Theoretical and experimental frequency narrowing studies of a Ti:sapphire ring laser with no intracavity optical elements are reported. Frequency narrowing has been achieved using a birefringent filter between a partially reflecting reverse wave suppressor mirror and the ring cavity output mirror. Results of CW diode laser injection seeding are reported.

Performance of 4600-pound-thrust centrifugal-flow-type turbojet engine with water-alcohol injection at inlet

NASA Technical Reports Server (NTRS)

Glasser, Philip W

1950-01-01

An experimental investigation of the effects of injecting a water-alcohol mixture of 2:1 at the compressor inlet of a centrifugal-flow type turbojet engine was conducted in an altitude test chamber at static sea-level conditions and at an altitude of 20,000 feet with a flight Mach number of 0.78 with an engine operating at rated speed. The net thrust was augmented by 0.16 for both flight conditions with a ratio of injected liquid to air flow of 0.05. Further increases in the liquid-air ratio did not give comparable increases in thrust.

A Highly Efficient Six-Stroke Internal Combustion Engine Cycle with Water Injection for In-Cylinder Exhaust Heat Recovery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conklin, Jim; Szybist, James P

2010-01-01

A concept is presented here that adds two additional strokes to the four-stroke Otto or Diesel cycle that has the potential to increase fuel efficiency of the basic cycle. The engine cycle can be thought of as a 4 stroke Otto or Diesel cycle followed by a 2-stroke heat recovery steam cycle. Early exhaust valve closing during the exhaust stroke coupled with water injection are employed to add an additional power stroke at the end of the conventional four-stroke Otto or Diesel cycle. An ideal thermodynamics model of the exhaust gas compression, water injection at top center, and expansion wasmore » used to investigate this modification that effectively recovers waste heat from both the engine coolant and combustion exhaust gas. Thus, this concept recovers energy from two waste heat sources of current engine designs and converts heat normally discarded to useable power and work. This concept has the potential of a substantial increase in fuel efficiency over existing conventional internal combustion engines, and under appropriate injected water conditions, increase the fuel efficiency without incurring a decrease in power density. By changing the exhaust valve closing angle during the exhaust stroke, the ideal amount of exhaust can be recompressed for the amount of water injected, thereby minimizing the work input and maximizing the mean effective pressure of the steam expansion stroke (MEPsteam). The value of this exhaust valve closing for maximum MEPsteam depends on the limiting conditions of either one bar or the dew point temperature of the expansion gas/moisture mixture when the exhaust valve opens to discard the spent gas mixture in the sixth stroke. The range of MEPsteam calculated for the geometry of a conventional gasoline spark-ignited internal combustion engine and for plausible water injection parameters is from 0.75 to 2.5 bars. Typical combustion mean effective pressures (MEPcombustion) of naturally aspirated gasoline engines are up to 10 bar, thus this concept has the potential to significantly increase the engine efficiency and fuel economy while not resulting in a decrease in power density.« less

The use of intraosseous anesthesia among endodontists: results of a questionnaire.

PubMed

Bangerter, Chad; Mines, Pete; Sweet, Mark

2009-01-01

The purpose of this study was to investigate the use of supplemental intraosseous (IO) anesthesia among endodontists in the United States. The study also looked at the types of anesthetic solutions commonly used for IO anesthesia and in which diagnostic conditions IO anesthesia is used. A Web-based survey of 2,528 active members of the American Association of Endodontists was sent out by e-mail. Data from 833 respondents were collected with a response rate of 33%. It was discovered that 94.77% of the respondents used some form of IO anesthesia, with the periodontal ligament injection (PDL) being the most commonly administered (49.78%). Symptomatic irreversible pulpitis is the pulpal diagnosis for which respondents most often use some form of IO anesthesia (61.99%), and 2% lidocaine with epinephrine 1:100,000 is the most common anesthetic solution used in IO anesthesia (37.62%). Although more than half of the respondents use some form of IO anesthesia more than twice a week, newer IO anesthesia delivery systems such as Stabident (Fairfax Dental, San Francisco, CA) and X-Tip (Dentsply International, Johnson City, TN) are used less often than the PDL injection.

Development and psychometric validation of a self-administered questionnaire assessing the acceptance of influenza vaccination: the Vaccinees' Perception of Injection (VAPI©) questionnaire

PubMed Central

Chevat, Catherine; Viala-Danten, Muriel; Dias-Barbosa, Carla; Nguyen, Van Hung

2009-01-01

Background Influenza is among the most common infectious diseases. The main protection against influenza is vaccination. A self-administered questionnaire was developed and validated for use in clinical trials to assess subjects' perception and acceptance of influenza vaccination and its subsequent injection site reactions (ISR). Methods The VAPI questionnaire was developed based on interviews with vaccinees. The initial version was administered to subjects in international clinical trials comparing intradermal with intramuscular influenza vaccination. Item reduction and scale construction were carried out using principal component and multitrait analyses (n = 549). Psychometric validation of the final version was conducted per country (n = 5,543) and included construct and clinical validity and internal consistency reliability. All subjects gave their written informed consent before being interviewed or included in the clinical studies. Results The final questionnaire comprised 4 dimensions ("bother from ISR"; "arm movement"; "sleep"; "acceptability") grouping 16 items, and 5 individual items (anxiety before vaccination; bother from pain during vaccination; satisfaction with injection system; willingness to be vaccinated next year; anxiety about vaccination next year). Construct validity was confirmed for all scales in most of the countries. Internal consistency reliability was good for all versions (Cronbach's alpha ranging from 0.68 to 0.94), as was clinical validity: scores were positively correlated with the severity of ISR and pain. Conclusion The VAPI questionnaire is a valid and reliable tool, assessing the acceptance of vaccine injection and reactions following vaccination. Trial registration NCT00258934, NCT00383526, NCT00383539. PMID:19261173

[Upregulation of P2X3 receptors in dorsal root ganglion of TRPV1 knockout female mice].

PubMed

Fang, Xiao; Shi, Xiao-Han; Huang, Li-Bin; Rong, Wei-Fang; Ma, Bei

2014-08-25

The study was aimed to investigate the changes in mechanical pain threshold in the condition of chronic inflammatory pain after transient receptor potential vanilloid 1 (TRPV1) gene was knockout. Hind-paw intraplantar injection of complete freund's adjuvant (CFA, 20 μL) produced peripheral inflammation in wild-type and TRPV1 knockout female mice. The mechanical pain thresholds were measured during the 8 days after injection and pre-injection by using Von-Frey hair. Nine days after injection, mice were killed and the differences of expression of c-Fos and P2X3 receptor in the dorsal root ganglia (DRG) and spinal cord dorsal horn were examined by Western blotting between the two groups. Compared with that in wild-type mice, the mechanical pain threshold was increased significantly in TRPV1 knockout mice (P < 0.05); 3 days after CFA injection, the baseline mechanical pain threshold in the TRPV1 knockout mice group was significantly higher than that in the wild-type mice group (P < 0.05); The result of Western blotting showed that the expression of c-Fos protein both in DRG and spinal cord dorsal horn of TRPV1 knockout mice group was decreased significantly compared with that in wild-type mice group (P < 0.01, P < 0.05), while the expression of P2X3 receptor in DRG of TRPV1 knockout mice group was increased significantly compared with that in wild-type mice group (P < 0.05). Our findings indicate that TRPV1 may influence the peripheral mechanical pain threshold by mediating the expression of c-Fos protein both in DRG and spinal cord dorsal horn and changing the expression of P2X3 receptor in DRG.

An In Vivo Study of Composite Microgels Based on Hyaluronic Acid and Gelatin for the Reconstruction of Surgically Injured Rat Vocal Folds

PubMed Central

Coppoolse, Jiska M. S.; Van Kooten, T. G.; Heris, Hossein K.; Mongeau, Luc; Li, Nicole Y. K.; Thibeault, Susan L.; Pitaro, Jacob; Akinpelu, Olubunmi; Daniel, Sam J.

2016-01-01

Purpose The objective of this study was to investigate local injection with a hierarchically microstructured hyaluronic acid–gelatin (HA-Ge) hydrogel for the treatment of acute vocal fold injury using a rat model. Method Vocal fold stripping was performed unilaterally in 108 Sprague-Dawley rats. A volume of 25 ml saline (placebo controls), HA-bulk, or HA-Ge hydrogel was injected into the lamina propria (LP) 5 days after surgery. The vocal folds were harvested at 3, 14, and 28 days after injection and analyzed using hematoxylin and eosin staining and immunohistochemistry staining for macrophages, myofibroblasts, elastin, collagen type I, and collagen type III. Results The macrophage count was statistically significantly lower in the HA-Ge group than in the saline group (p < .05) at Day 28. Results suggested that the HA-Ge injection did not induce inflammatory or rejection response. Myofibroblast counts and elastin were statistically insignificant across treatment groups at all time points. Increased elastin deposition was qualitatively observed in both HA groups from Day 3 to Day 28, and not in the saline group. Significantly more elastin was observed in the HA-bulk group than in the uninjured group at Day 28. Significantly more collagen type I was observed in the HA-bulk and HA-Ge groups than in the saline group (p < .05) at Day 28. The collagen type I concentration in the HA-Ge and saline groups was found to be comparable to that in the uninjured controls at Day 28. The concentration of collagen type III in all treatment groups was similar to that in uninjured controls at Day 28. Conclusion Local HA-Ge and HA-bulk injections for acute injured vocal folds were biocompatible and did not induce adverse response. PMID:24687141

Botulinum toxin type-A in therapy of patients with anismus.

PubMed

Ron, Y; Avni, Y; Lukovetski, A; Wardi, J; Geva, D; Birkenfeld, S; Halpern, Z

2001-12-01

Anismus is a common cause of constipation and outlet obstruction. Standard therapy with laxatives or biofeedback has conflicting results. Surgical treatment gives poor results and has practically been abandoned. This study was designed to evaluate the efficacy of botulinum toxin type-A (Botox) injection to the puborectalis muscle in patients with anismus. Twenty-five patients (15 females; mean age, 23.2) with history of constipation and symptoms of outlet obstruction underwent anorectal perfusion manometry and video-proctography. All patients were found to have a nonrelaxing puborectalis muscle on both modalities. All have been unable to expel a rectal balloon. Each patient who participated in the study was randomly assigned to undergo local injection of Botox--10 units to each side of the puborectalis or 20 units to the posterior aspect of this muscle. Eight patients underwent further injections1-5 every 3 months in accordance with previous results. Follow-up was conducted 1, 4, 12, and 24 weeks after injection. Straining, anorectal pain, and overall satisfaction were assessed on a visual analog scale. Weekly evacuation, fecal incontinence, and complications were recorded. At the weekly meeting, each patient underwent anorectal manometry with a balloon expulsion test. Manometric relaxation was achieved after the first injection in 18 patients (75 percent). Once relaxation was achieved, it lasted throughout the follow-up. Nine patients (37.5 percent) expelled the rectal balloon after the first injection. Seven of 16 patients who failed the first injection had an additional one. In 2 patients it was successful (28.6 percent). Symptom improvement of 29.2 percent in straining index was recorded during follow-up. In 3 patients (12.5 percent) pain developed after injection. No other complications were observed. Overall satisfaction with Botox injection results was observed in 58.3 percent. Botox injection to the puborectalis muscle has been found to have a limited therapeutic effect on patients suffering from anismus. Our results justify the need for further double-blind placebo-controlled trials to determine the exact role of botulinum toxin type-A in anismus.

Botulinum Toxin Type A Injection for Spastic Equinovarus Foot in Children with Spastic Cerebral Palsy: Effects on Gait and Foot Pressure Distribution

PubMed Central

Choi, Ja Young; Jung, Soojin; Rha, Dong-wook

2016-01-01

Purpose To investigate the effect of intramuscular Botulinum toxin type A (BoNT-A) injection on gait and dynamic foot pressure distribution in children with spastic cerebral palsy (CP) with dynamic equinovarus foot. Materials and Methods Twenty-five legs of 25 children with CP were investigated in this study. BoNT-A was injected into the gastrocnemius (GCM) and tibialis posterior (TP) muscles under the guidance of ultrasonography. The effects of the toxin were clinically assessed using the modified Ashworth scale (MAS) and modified Tardieu scale (MTS), and a computerized gait analysis and dynamic foot pressure measurements using the F-scan system were also performed before injection and at 1 and 4 months after injection. Results Spasticity of the ankle plantar-flexor in both the MAS and MTS was significantly reduced at both 1 and 4 months after injection. On dynamic foot pressure measurements, the center of pressure index and coronal index, which represent the asymmetrical weight-bearing of the medial and lateral columns of the foot, significantly improved at both 1 and 4 months after injection. The dynamic foot pressure index, total contact area, contact length and hind foot contact width all increased at 1 month after injection, suggesting better heel contact. Ankle kinematic data were significantly improved at both 1 and 4 months after injection, and ankle power generation was significantly increased at 4 months after injection compared to baseline data. Conclusion Using a computerized gait analysis and foot scan, this study revealed significant benefits of BoNT-A injection into the GCM and TP muscles for dynamic equinovarus foot in children with spastic CP. PMID:26847306

DMEK lenticule preparation using an air dissection technique: central versus peripheral injection.

PubMed

Feizi, Sepehr; Javadi, Mohammad Ali

2016-01-01

To compare 2 sites of air injection to prepare donor lenticules for Descemet membrane (DM) endothelial keratoplasty. Fifty-one human corneoscleral buttons from donors aged 4 to 57 years were used. Corneoscleral buttons were placed endothelial side up and a 27-G needle was inserted just outside Schwalbe line and advanced immediately beneath the endothelium. Air was injected centrally inside the 8-mm zone (group 1) or peripherally approximately 1 mm in front of the limbus (group 2). Air injection was continued to extend the DM detachment as far as possible into the corneal periphery. Comparisons of central versus peripheral air injection were performed for reproducibility, the rate of usable tissue, and the type and diameter of the acquired bubble. The mean donor age was 30.0 ± 12.9 years. A big bubble was achieved following central or peripheral air injection in all cases. A usable donor lenticule (≥ 8.0 mm) was achieved in 95.7% of cases in group 1 and 89.3% of cases in group 2 (p>0.99). Both injection sites were comparable with regard to the diameter of the achieved bubbles (9.57 ± 2.11 mm versus 10.22 ± 2.34 mm, respectively, p = 0.32), the chance of complete DM detachment (39.1% versus 53.6%, respectively, p = 0.25), and the risk of bubble bursting (4.4% versus 7.1%, respectively, p = 0.41). The odds of a type 2 bubble increased by 11.86 for peripheral air injections compared to central injections (p = 0.01). Both injection sites exhibited comparable rates of usable donor lenticules. However, peripheral air injection was more likely to yield stroma-free grafts.

Experimental study of the transient hydrogen jet - Using a fast response probe

NASA Astrophysics Data System (ADS)

Tanabe, H.; Ohnishi, M.; Sato, G. T.; Fujimoto, H.

Mixing processes of a transient hydrogen jet, such as those of a hydrogen-injection internal combustion engine, are studied by means of a concentration probe having a response time of less than 200 microsec. Hydrogen was injected into quiescent air by means of (1) a single-shot device, in order to study the air interactions of the jet with schlieren photography and smoke wire methods, and (2) a hydrogen diesel engine injection nozzle to determine jet shape with high speed schlieren photography. The concentration probe's response time was found to be adequate for the very short injection period, and it was determined that air-hydrogen mixing in the case of high jet momentum is governed by eddy diffusion.

A New Partial Reconfiguration-Based Fault-Injection System to Evaluate SEU Effects in SRAM-Based FPGAs

NASA Astrophysics Data System (ADS)

Sterpone, L.; Violante, M.

2007-08-01

Modern SRAM-based field programmable gate array (FPGA) devices offer high capability in implementing complex system. Unfortunately, SRAM-based FPGAs are extremely sensitive to single event upsets (SEUs) induced by radiation particles. In order to successfully deploy safety- or mission-critical applications, designer need to validate the correctness of the obtained designs. In this paper we describe a system based on partial-reconfiguration for running fault-injection experiments within the configuration memory of SRAM-based FPGAs. The proposed fault-injection system uses the internal configuration capabilities that modern FPGAs offer in order to inject SEU within the configuration memory. Detailed experimental results show that the technique is orders of magnitude faster than previously proposed ones.

MICRURGICAL STUDIES IN CELL PHYSIOLOGY

PubMed Central

Chambers, Robert; Reznikoff, Paul

1926-01-01

By means of micro-dissection and injection Amœba proteus was treated with the chlorides of Na, K, Ca, and Mg alone, in combination, and with variations of pH. I. The Plasmalemma. 1. NaCl weakens and disrupts the surface membrane of the ameba. Tearing the membrane accelerates the disruption which spreads rapidly from the site of the tear. KCl has no disruptive effect on the membrane but renders it adhesive. 2. MgCl2 and CaCl2 have no appreciable effect on the integrity of the surface membrane of the ameba when applied on the outside. No spread of disruption occurs when the membrane is torn in these salts. When these salts are introduced into the ameba they render the pellicle of the involved region rigid. II. The Internal Protoplasm. 3. Injected water either diffuses through the protoplasm or becomes localized in a hyaline blister. Large amounts when rapidly injected produce a "rushing effect". 4. HCl at pH 1.8 solidifies the internal protoplasm and at pH 2.2 causes solidification only after several successive injections. The effect of the subsequent injections may be due to the neutralization of the cell-buffers by the first injection. 5. NaCl and KCl increase the fluidity of the internal protoplasm and induce quiescence. 6. CaCl2 and MgCl2 to a lesser extent solidify the internal protoplasm. With CaCl2 the solidification tends to be localized. With MgCl2 it tends to spread. The injection of CaCl2 accelerates movement in the regions not solidified whereas the injection of MgCl2 induces quiescence. III. Pinching-Off Reaction. 7. A hyaline blister produced by the injection of water may be pinched off. The pinched-off blister is a liquid sphere surrounded by a pellicle. 8. Pinching off always takes place with injections of HCl when the injected region is solidified. 9. The injection of CaCl2 usually results in the pinching off of the portion solidified. The rate of pinching off varies with the concentration of the salt. The injection of MgCl2 does not cause pinching off. IV. Reparability of Torn Surfaces. 10. The repair of a torn surface takes place readily in distilled water. In the different salt solutions, reparability varies specifically with each salt, with the concentration of the salt, and with the extent of the tear. In NaCl and in KCl repair occurs less readily than in water. In MgCl2 repair takes place with great difficulty. In CaCl2 a proper estimate of the process of repair is complicated by the pinching-off phenomenon. However, CaCl2 is the only salt found to increase the mobility of the plasmalemma, and this presumably enhances its reparability. 11. The repair of the surface is probably a function of the internal protoplasm and depends upon an interaction of the protoplasm with the surrounding medium. V. Permeability. 12. NaCl and KCl readily penetrate the ameba from the exterior. CaCl2 and MgCl2 do not. 13. All four salts when injected into an ameba readily diffuse through the internal protoplasm. In the case of CaCl2 the diffusion may be arrested by the pinching-off process. VI. Toxicity. 14. NaCl and KCl are more toxic to the exterior of the cell than to the interior, and the reverse is true for CaCl2 and MgCl2. 15. The relative non-toxicity of injected NaCl to the interior of the ameba is not necessarily due to its diffusion outward from the cell. 16. HCl is much more toxic to the exterior of a cell than to the interior; at pH 5.5 it is toxic to the surface whereas at pH 2.5 it is not toxic to the interior. NaOH to pH 9.8 is not toxic either to the surface or to the interior. VII. Antagonism. 17. The toxic effects of NaCl and of KCl on the exterior of the cell can be antagonized by CaCl2 and this antagonism occurs at the surface. Although the lethal effect of NaCl is thus antagonized, NaCl still penetrates but at a slower rate than if the ameba were immersed in a solution of this salt alone. 18. NaCl and HCl are mutually antagonistic in the interior of the ameba. No antagonism between the salts and HCl was found on the exterior of the ameba. No antagonism between the salts and NaOH was found on the interior or exterior of the ameba. 19. The pinching-off phenomenon can be antagonized by NaCl or by KCl, and the rate of the retardation of the pinching-off process varies with the concentration of the antagonizing salt. 20. The prevention of repair of a torn membrane by toxic solutions of NaCl or KCl can be antagonized by CaCl2. These experiments show directly the marked difference between the interior and the exterior of the cell in their behavior toward the chlorides of Na, K, Ca, and Mg. PMID:19872206

Long-Acting Phospholipid Gel of Exenatide for Long-Term Therapy of Type II Diabetes.

PubMed

Hu, Mei; Zhang, Yu; Xiang, Nanxi; Zhong, Ying; Gong, Tao; Zhang, Zhi-Rong; Fu, Yao

2016-06-01

This study aimed to develop a sustained-release formulation of exenatide (EXT) for the long-term therapeutic efficacy in the treatment of type II diabetes. In this study, we present an injectable phospholipid gel by mixing biocompatible phospholipid S100, medium chain triglyceride (MCT) with 85% (w/w) ethanol. A systemic pre-formulation study has been carried out to improve the stability of EXT during formulation fabrication. With the optimized formulation, the pharmacokinetic profiles in rats were studied and two diabetic animal models were employed to evaluate the therapeutic effect of EXT phospholipid gel via a single subcutaneous injection versus repeated injections of normal saline and EXT solution. With optimized formulation, sustained release of exenatide in vivo for over three consecutive weeks was observed after one single subcutaneous injection. Moreover, the pharmacodynamic study in two diabetic models justified that the gel formulation displayed a comparable hypoglycemic effect and controlled blood glucose level compared with exenatide solution treated group. EXT-loaded phospholipid gel represents a promising controlled release system for long-term therapy of type II diabetes.

Computational Study of an Axisymmetric Dual Throat Fluidic Thrust Vectoring Nozzle for a Supersonic Aircraft Application

NASA Technical Reports Server (NTRS)

Deere, Karen A.; Flamm, Jeffrey D.; Berrier, Bobby L.; Johnson, Stuart K.

2007-01-01

A computational investigation of an axisymmetric Dual Throat Nozzle concept has been conducted. This fluidic thrust-vectoring nozzle was designed with a recessed cavity to enhance the throat shifting technique for improved thrust vectoring. The structured-grid, unsteady Reynolds- Averaged Navier-Stokes flow solver PAB3D was used to guide the nozzle design and analyze performance. Nozzle design variables included extent of circumferential injection, cavity divergence angle, cavity length, and cavity convergence angle. Internal nozzle performance (wind-off conditions) and thrust vector angles were computed for several configurations over a range of nozzle pressure ratios from 1.89 to 10, with the fluidic injection flow rate equal to zero and up to 4 percent of the primary flow rate. The effect of a variable expansion ratio on nozzle performance over a range of freestream Mach numbers up to 2 was investigated. Results indicated that a 60 circumferential injection was a good compromise between large thrust vector angles and efficient internal nozzle performance. A cavity divergence angle greater than 10 was detrimental to thrust vector angle. Shortening the cavity length improved internal nozzle performance with a small penalty to thrust vector angle. Contrary to expectations, a variable expansion ratio did not improve thrust efficiency at the flight conditions investigated.

Experimental Study of an Axisymmetric Dual Throat Fluidic Thrust Vectoring Nozzle for Supersonic Aircraft Application

NASA Technical Reports Server (NTRS)

Flamm, Jeffrey D.; Deere, Karen A.; Mason, Mary L.; Berrier, Bobby L.; Johnson, Stuart K.

2007-01-01

An axisymmetric version of the Dual Throat Nozzle concept with a variable expansion ratio has been studied to determine the impacts on thrust vectoring and nozzle performance. The nozzle design, applicable to a supersonic aircraft, was guided using the unsteady Reynolds-averaged Navier-Stokes computational fluid dynamics code, PAB3D. The axisymmetric Dual Throat Nozzle concept was tested statically in the Jet Exit Test Facility at the NASA Langley Research Center. The nozzle geometric design variables included circumferential span of injection, cavity length, cavity convergence angle, and nozzle expansion ratio for conditions corresponding to take-off and landing, mid climb and cruise. Internal nozzle performance and thrust vectoring performance was determined for nozzle pressure ratios up to 10 with secondary injection rates up to 10 percent of the primary flow rate. The 60 degree span of injection generally performed better than the 90 degree span of injection using an equivalent injection area and number of holes, in agreement with computational results. For injection rates less than 7 percent, thrust vector angle for the 60 degree span of injection was 1.5 to 2 degrees higher than the 90 degree span of injection. Decreasing cavity length improved thrust ratio and discharge coefficient, but decreased thrust vector angle and thrust vectoring efficiency. Increasing cavity convergence angle from 20 to 30 degrees increased thrust vector angle by 1 degree over the range of injection rates tested, but adversely affected system thrust ratio and discharge coefficient. The dual throat nozzle concept generated the best thrust vectoring performance with an expansion ratio of 1.0 (a cavity in between two equal minimum areas). The variable expansion ratio geometry did not provide the expected improvements in discharge coefficient and system thrust ratio throughout the flight envelope of typical a supersonic aircraft. At mid-climb and cruise conditions, the variable geometry design compromised thrust vector angle achieved, but some thrust vector control would be available, potentially for aircraft trim. The fixed area, expansion ratio of 1.0, Dual Throat Nozzle provided the best overall compromise for thrust vectoring and nozzle internal performance over the range of NPR tested compared to the variable geometry Dual Throat Nozzle.

Interventional Catheterization Combined with Staphylococcin Aureus Injection in 112 Cases of Ischemic Necrosis of Femoral Heads.

PubMed

Liang, Junkui; Jiang, Xiliang; Zhang, Xiulin; Cao, Wendong; Wang, Yong; Han, Jie

2015-11-01

The objective of this study was to investigate the effectiveness of interventional catheterization with staphylococcin aureus injection on ischemic necrosis of the femoral heads. By percutaneous catheterization of the femoral artery, papaverine, urokinase, compound Danshen, and anisodamine were injected intravenously into the arteries of the femoral head. Staphylococcin aureus injection was injected into the hit joint capsule on the side of the lesion to compare the conditions before and after surgery. The patients did the rehabilitation exercises of the hit joint 48 h after the surgery and had double crutches for 3-6 months. Of the 112 cases, 39 cases (34.8 %) were cured, 51 cases (45.6 %) were markedly effective, and 22 cases (19.6 %) were effective. Interventional catheterization combined with staphylococcin aureus injection given into the hit joint capsule is an effective way to treat ischemic necrosis of the femoral head by influencing the internal and external environments of the femoral head.

Investigation of Thrust Augmentation of a 1600-pound Thrust Centrifugal-flow-type Turbojet Engine by Injection of Refrigerants at Compressor Inlets

NASA Technical Reports Server (NTRS)

Jones, William L.; Dowman, Harry W.

1947-01-01

Investigations were conducted to determine effectiveness of refrigerants in increasing thrust of turbojet engines. Mixtures of water an alcohol were injected for a range of total flows up to 2.2 lb/sec. Kerosene was injected into inlets covering a range of injected flows up to approximately 30% of normal engine fuel flow. Injection of 2.0 lb/sec of water alone produced an increase in thrust of 35.8% of rate engine conditions and kerosene produced a negligible increase in thrust. Carbon dioxide increased thrust 23.5 percent.

Lethal injection of potassium chloride: first description of the pathological appearance of organs.

PubMed

Coulibaly, Béma; Piercecchi-Marti, Marie-Dominique; Bartoli, Christophe; Liprandi, Agnes; Léonetti, Georges; Pellissier, Jean-François

2010-05-01

Lethal injection of potassium chloride (KCl) can be used as a method of either suicide or homicide. As biological tests are still inadequate to differentiate endogenous from exogenous potassium, at the scene of death the cause can only be suspected. We wished to determine the usefulness of conventional pathological examination in this context and carried out a study in four fetuses after medical termination of pregnancy for serious disease. Pregnancy was terminated by KCl injection in two cases and by injection of lidocaine and sufentanil in the other two cases. In each of the two fetuses in which KCl injection was performed, macroscopic examination showed whitish deposits on the tissues and histological examination showed clumps of lanceolate crystals in the internal organs. In the two fetuses which received lidocaine and sufentanil injection, no deposits were visible on macroscopic examination and no crystals were seen on histological examination. These findings suggest that pathological study may have useful applications in forensic medicine when death by potassium injection is suspected. 2009 John Wiley & Sons, Ltd.

Safe and Effective Use of the Once Weekly Dulaglutide Single-Dose Pen in Injection-Naïve Patients With Type 2 Diabetes.

PubMed

Matfin, Glenn; Van Brunt, Kate; Zimmermann, Alan G; Threlkeld, Rebecca; Ignaut, Debra A

2015-04-21

This 4-week, phase 3b, multicenter, open-label, single-arm, outpatient study demonstrated the safe and effective use of the dulaglutide single-dose pen containing 0.5 mL of placebo for subcutaneous injection in injection-naïve adult patients with type 2 diabetes (T2D), with A1C ≤ 8.5% (69 mmol/mol), BMI ≥ 23 kg/m2 and ≤ 45 kg/m(2). Patients completed a modified self-injecting subscale of the Diabetes Fear of Injecting and Self-Testing Questionnaire (mD-FISQ) and were trained to self-inject with the single-dose pen. Patients completed the initial self-injection at the site, injected at home for 2 subsequent weeks, and returned to the site for the final injection. The initial and final self-injections were evaluated for success; the final (initial) self-injection success rate was the primary (secondary) outcome measure, and the primary (secondary) objective was to demonstrate this success rate as being significantly greater than 80%. Patients recorded their level of pain after each injection. After the final injection, patients completed the mD-FISQ and the Medication Delivery Device Assessment Battery (MDDAB) to assess their perceptions of the single-dose pen, including ease of use and experience with the device. Among 211 patients (mean age: 61 years), the primary objective was met, with a final injection success rate of 99.1% (95% CI: 96.6% to 99.7%). Among 214 patients, the initial injection success rate was 97.2% (95% CI: 94.0% to 98.7%), meeting the key secondary objective. Overall, most patients (>96%) found the device easy to use, were satisfied with the device, and would be willing to continue to use the single-dose pen after the study. There was a significant reduction (P < .001) from baseline to study end in patients' fear of self-injecting, as measured by the mD-FISQ. The dulaglutide single-dose pen was found to be a safe and effective device for use by patients with T2D who were injection-naïve. A positive injection experience is an important factor for patients and providers when initiating injectable therapy. © 2015 Diabetes Technology Society.

Safe and Effective Use of the Once Weekly Dulaglutide Single-Dose Pen in Injection-Naïve Patients With Type 2 Diabetes

PubMed Central

Matfin, Glenn; Van Brunt, Kate; Zimmermann, Alan G.; Threlkeld, Rebecca; Ignaut, Debra A.

2015-01-01

Background: This 4-week, phase 3b, multicenter, open-label, single-arm, outpatient study demonstrated the safe and effective use of the dulaglutide single-dose pen containing 0.5 mL of placebo for subcutaneous injection in injection-naïve adult patients with type 2 diabetes (T2D), with A1C ≤ 8.5% (69 mmol/mol), BMI ≥ 23 kg/m2 and ≤ 45 kg/m2. Method: Patients completed a modified self-injecting subscale of the Diabetes Fear of Injecting and Self-Testing Questionnaire (mD-FISQ) and were trained to self-inject with the single-dose pen. Patients completed the initial self-injection at the site, injected at home for 2 subsequent weeks, and returned to the site for the final injection. The initial and final self-injections were evaluated for success; the final (initial) self-injection success rate was the primary (secondary) outcome measure, and the primary (secondary) objective was to demonstrate this success rate as being significantly greater than 80%. Patients recorded their level of pain after each injection. After the final injection, patients completed the mD-FISQ and the Medication Delivery Device Assessment Battery (MDDAB) to assess their perceptions of the single-dose pen, including ease of use and experience with the device. Results: Among 211 patients (mean age: 61 years), the primary objective was met, with a final injection success rate of 99.1% (95% CI: 96.6% to 99.7%). Among 214 patients, the initial injection success rate was 97.2% (95% CI: 94.0% to 98.7%), meeting the key secondary objective. Overall, most patients (>96%) found the device easy to use, were satisfied with the device, and would be willing to continue to use the single-dose pen after the study. There was a significant reduction (P < .001) from baseline to study end in patients’ fear of self-injecting, as measured by the mD-FISQ. Conclusions: The dulaglutide single-dose pen was found to be a safe and effective device for use by patients with T2D who were injection-naïve. A positive injection experience is an important factor for patients and providers when initiating injectable therapy. PMID:25901022

Fracturing of porous rock induced by fluid injection

NASA Astrophysics Data System (ADS)

Stanchits, Sergei; Mayr, Sibylle; Shapiro, Serge; Dresen, Georg

2011-04-01

We monitored acoustic emission (AE) activity and brittle failure initiated by water injection into initially dry critically stressed cylindrical specimens of Flechtingen sandstone of 50 mm diameter and 105-125 mm length. Samples were first loaded in axial direction at 40-50 MPa confining pressure at dry conditions close to peak stress. Subsequently distilled water was injected either at the bottom of specimen or via a central borehole at pore pressures of 5-30 MPa. Water injection into stressed porous sandstone induced a cloud of AE events located close to the migrating water front. Water injection was monitored by periodic ultrasonic velocity measurements across the sample. Propagation of the induced cloud of AE was faster in the direction parallel to bedding than normal to it, indicating permeability anisotropy. Water injection was associated with significant AE activity demonstrating increased contribution of tensile source type. Brittle failure was accompanied by increased contribution of shear and pore collapse source types. At a critical pore pressure, a brittle fault nucleated from a cloud of induced AE events in all samples. Microstructural analysis of fractured samples shows excellent agreement between location of AE hypocenters and macroscopic faults.

Using cold air for reducing needle-injection pain.

PubMed

Al-Qarqaz, Firas; Al-Aboosi, Mustafa; Al-shiyab, Diala; Al Dabbagh, Ziad

2012-07-01

Pain is associated with skin injections. Reducing injection-associated pain is important especially when multiple injections are needed in difficult areas, such as the palms. We present a new safe application for cold air used in laser therapy. The main objectives of this study are to see whether cold air can reduce needle-injection pain and to evaluate the safety of this new application. Patients undergoing skin injection (n=40) were included. Assessment of pain level using visual analog scale (VAS) was done using cold air and again without cold air in the same patient. Comparison of pain scores was performed. Thirty-three patients had lower VAS scores using cold air. Five patients had worse VAS scores, and two patients did not have any change in their pain score. In the group of patients where injections were made to the palms (n=5), there was even more reduction in VAS scores. There were no significant immediate or delayed side effects. Cold air seems to be useful in reducing needle-injection pain in the majority of patients, especially in the palms. This procedure is safe, apart from immediate tolerable discomfort when used around the nose. © 2012 The International Society of Dermatology.

A Tale of Two Cities: Stigma and Health Outcomes Among People with HIV who Inject Drugs in St. Petersburg, Russia and Kohtla-Järve, Estonia

PubMed Central

Burke, Sara E.; Calabrese, Sarah K.; Dovidio, John F.; Levina, Olga S.; Uusküla, Anneli; Niccolai, Linda M.; Abel-Ollo, Katri; Heimer, Robert

2015-01-01

Experiences of stigma are often associated with negative mental and physical health outcomes. The present work tested the associations between stigma and health-related outcomes among people with HIV who inject drugs in Kohtla-Järve, Estonia and St. Petersburg, Russia. These two cities share some of the highest rates of HIV outside of sub-Saharan Africa, largely driven by injection drug use, but Estonia has implemented harm reduction services more comprehensively. People who inject drugs were recruited using respondent-driven sampling; those who indicated being HIV-positive were included in the present sample (n=381 in St. Petersburg; n=288 in Kohtla-Järve). Participants reported their health information and completed measures of internalized HIV stigma, anticipated HIV stigma, internalized drug stigma, and anticipated drug stigma. Participants in both locations indicated similarly high levels of all four forms of stigma. However, stigma variables were more strongly associated with health outcomes in Russia than in Estonia. The St. Petersburg results were consistent with prior work linking stigma and health. Lower barriers to care in Kohtla-Järve may help explain why social stigma was not closely tied to negative health outcomes there. Implications for interventions and health policy are discussed. PMID:25703668

Prescriptions for self-injectable epinephrine and follow-up referral in emergency department patients presenting with anaphylaxis.

PubMed

Campbell, Ronna L; Luke, Anuradha; Weaver, Amy L; St Sauver, Jennifer L; Bergstralh, Eric J; Li, James T; Manivannan, Veena; Decker, Wyatt W

2008-12-01

Anaphylaxis guidelines recommend that patients with a history of anaphylactic reaction should carry self-injectable epinephrine and should be referred to an allergist. To evaluate how frequently patients dismissed from the emergency department after treatment for anaphylaxis received a prescription for self-injectable epinephrine or allergist referral. A retrospective medical record review identified patients with anaphylaxis in a community-based study from 1990 through 2000. Records of patients with Hospital Adaptation of the International Classification of Diseases, Second Edition or International Classification of Diseases, Ninth Revision codes representing anaphylaxis were reviewed, and a random sample of patients with associated diagnoses was also reviewed. Patients who met the criteria for diagnosis of anaphylaxis were included in the study. Among 208 patients identified with anaphylaxis, 134 (64.4%) were seen in the emergency department and discharged home. On dismissal, 49 patients (36.6%; 95% confidence interval [CI], 28.4%-44.7%) were prescribed self-injectable epinephrine, and 42 patients (31.3%; 95% CI, 23.5%-39.2%) were referred to an allergist. Treatment with epinephrine in the emergency department (odds ratio, 3.6; 95% CI, 1.6-7.9; P = .001) and insect sting as the inciting allergen (odds ratio, 4.0; 95% CI, 1.6-10.5; P = .004) were significantly associated with receiving a prescription for self-injectable epinephrine. Patient age younger than 18 years was the only factor associated with referral to an allergist (P = .007). Most patients dismissed after treatment for anaphylaxis did not receive a self-injectable epinephrine prescription or allergist referral. Emergency physicians may be missing an important opportunity to ensure prompt treatment of future anaphylactic reactions and specialized follow-up care.

Pressures generated in vitro during Stabident intraosseous injections.

PubMed

Whitworth, J M; Ramlee, R A M; Meechan, J G

2005-05-01

To test the hypothesis that the Stabident intraosseous injection is a potentially high-pressure technique, which carries serious risks of anaesthetic cartridge failure. A standard Astra dental syringe was modified to measure the internal pressure of local anaesthetic cartridges during injection. Intra-cartridge pressures were measured at 1 s intervals during slow (approximately 15 s) and rapid (<10 s) injections of 2% Xylocaine with 1:80,000 adrenaline (0.25 cartridge volumes) into air (no tissue resistance), or into freshly prepared Stabident perforation sites in the anterior mandible of freshly culled young and old sheep (against tissue resistance). Each injection was repeated 10 times over 3 days. Absolute maximum pressures generated by each category of injection, mean pressures at 1 s intervals in each series of injections, and standard deviations were calculated. Curves of mean maximum intra-cartridge pressure development with time were plotted for slow and rapid injections, and one-way anova (P<0.05) conducted to determine significant differences between categories of injection. Pressures created when injecting into air were less than those needed to inject into tissue (P<0.001). Fast injection produced greater intra-cartridge pressures than slow delivery (P<0.05). Injection pressures rose more quickly and to higher levels in small, young sheep mandibles than in larger, old sheep mandibles. The absolute maximum intra-cartridge pressure developed during the study was 3.31 MPa which is less than that needed to fracture glass cartridges. Stabident intraosseous injection conducted in accordance with the manufacturer's instructions does not present a serious risk of dangerous pressure build-up in local anaesthetic cartridges.

Evaluation of perception of insulin therapy among Chinese patients with type 2 diabetes mellitus.

PubMed

Chen, C-C; Chang, M-P; Hsieh, M-H; Huang, C-Y; Liao, L-N; Li, T-C

2011-11-01

To evaluate whether perception of insulin therapy differs between patients with type 2 diabetes treated with insulin and those treated with oral hypoglycaemic agents (OHAs), and to examine whether gender, education level, injection duration and mode of injection were associated with the patients' perception of insulin therapy. The validated Chinese version of the Insulin Treatment Appraisal Scale (ITAS) was used to evaluate the perception of insulin therapy among 100 insulin-treated patients and 100 OHA-treated patients. The higher the total score, the more negative is the appraisal. The OHA-treated group had a higher mean total score (20 items), a higher mean total score for 16 negative items and a lower mean total score for four positive items than the insulin-treated group. The proportion of participants who rated the negative items as "agree" or "strongly agree" was significantly higher in the OHA-treated group than in the insulin-treated group. In addition, the proportion of participants who rated the four positive items as "agree" or "strongly agree" was lower in the OHA-treated group than in the insulin-treated group. Gender, education level, duration of insulin injection and mode of injection did not have a significant impact on perception of insulin therapy. Chinese type 2 diabetic patients taking OHAs had more negative beliefs and attitudes towards insulin therapy than patients being treated with insulin. This difference was not associated with either gender or education level. Furthermore, neither injection duration nor type of device was related to perception of insulin therapy. Copyright © 2011 Elsevier Masson SAS. All rights reserved.

Plastic changes in spinal synaptic transmission following botulinum toxin A in patients with post-stroke spasticity.

PubMed

Kerzoncuf, Marjorie; Bensoussan, Laurent; Delarque, Alain; Durand, Jacques; Viton, Jean-Michel; Rossi-Durand, Christiane

2015-11-01

The therapeutic effects of intramuscular injections of botulinum toxin-type A on spasticity can largely be explained by its blocking action at the neuromuscular junction. Botulinum toxin-type A is also thought to have a central action on the functional organization of the central nervous system. This study assessed the action of botulinum toxin-type A on spinal motor networks by investigating post-activation depression of the soleus H-reflex in post-stroke patients. Post-activation depression, a presynaptic mechanism controlling the synaptic efficacy of Ia-motoneuron transmission, is involved in the pathophysiology of spasticity. Eight patients with chronic hemiplegia post-stroke presenting with lower limb spasticity and requiring botulinum toxin-type A injection in the ankle extensor muscle. Post-activation depression of soleus H-reflex assessed as frequency-related depression of H-reflex was investigated before and 3, 6 and 12 weeks after botulinum toxin-type A injections in the triceps surae. Post-activation depression was quantified as the ratio between H-reflex amplitude at 0.5 and 0.1 Hz. Post-activation depression of soleus H-reflex, which is reduced on the paretic leg, was affected 3 weeks after botulinum toxin-type A injection. Depending on the residual motor capacity of the post-stroke patients, post-activation depression was either restored in patients with preserved voluntary motor control or further reduced in patients with no residual voluntary control. Botulinum toxin treatment induces synaptic plasticity at the Ia-motoneuron synapse in post-stroke paretic patients, which suggests that the effectiveness of botulinum toxin-type A in post-stroke rehabilitation might be partly due to its central effects.

[Ocular complications of local anaesthesia in dentistry].

PubMed

Steenen, S A; Dubois, L; de Lange, J

2017-03-01

An estimated 1 in 1,000 local anaesthetic injections in the maxilla or the mandible lead to unwanted effects on the ipsilateral eye. We have seen a case with diplopia and lateral rectus palsy following bimaxillary anaesthesia. A systematic literature review of reports on this type of complication resulted in a total of 144 documented cases published between 1936 and 2016. The most frequently reported symptoms included diplopia (72%), partial or full ophthalmoplegia (26%), ptosis (22%), mydriasis (18%), amaurosis (13%) and orbital pain (12%). This type of complication is best understood by pathophysiological hypotheses that include intra-arterial injection, intravenous injection, autonomic dysregulation, or deep injection and diffusion. If ocular symptoms appear after local intraoral anaesthesia, the patient should be reassured. In the case of diplopia, the eye should be covered with a gauze dressing, and the patient should be instructed about associated safety risks. If symptoms persist or when vision deteriorates, referral to an ophthalmologist is advisable.

SAPS-Associated Explosive Brightening on the Duskside: A New Type of Onset-Like Disturbance

NASA Astrophysics Data System (ADS)

Henderson, M. G.; Morley, S. K.; Kepko, L. E.

2018-01-01

Quasiperiodic energetic particle injections have been observed at geosynchronous orbit on the duskside during a steady magnetospheric convection event. We examine high-resolution auroral imager data and ground magnetometer data associated with the first of these injections and conclude that it was not associated with classical substorm signatures. It is proposed that these injections are caused by the explosive nonlinear growth of a shear flow-ballooning instability in the region where subauroral polarization streams (SAPS) also occur. It is suggested that interchange will occur preferentially in the low-conductivity SAPS region since the magnetic Richardson number is lowest there and the "line-tying" effect will also be least stabilizing there. We propose that the observed particle injection signatures and auroral morphology constitute a new type of SAPS-associated explosive "onset-like" disturbance that can occur during intervals of strong convection.

Hydrogel fibers encapsulating hiPSC-MSCs, hESC-MSCs and hUCMSCs in injectable calcium phosphate scaffold for bone tissue engineering

PubMed Central

Wang, Lin; Wang, Ping; Weir, Michael D.; Reynolds, Mark A.; Zhao, Liang; Xu, Hockin H. K.

2016-01-01

Human induced pluripotent stem cells (hiPSCs), human embryonic stem cells (hESCs) and human umbilical cord MSCs (hUCMSCs) are exciting cell sources for use in regenerative medicine. There has been no report on long hydrogel fibers encapsulating stem cells inside injectable calcium phosphate cement (CPC) scaffold for bone tissue engineering. The objectives of this study were to: (1) develop a novel injectable CPC construct containing hydrogel fibers encapsulating cells for bone engineering, and (2) investigate and compare cell viability, proliferation and osteogenic differentiation of hiPSC-MSCs, hESC-MSCs and hUCMSCs in injectable CPC. The stem cell-encapsulating pastes were fully injectable under a small injection force, and the injection did not harm the cells, compared to cells without injection (p > 0.1). Mechanical properties of stem cell-CPC construct were much higher than previous injectable polymers and hydrogels for cell delivery. hiPSC-MSCs, hESC-MSCs and hUCMSCs in hydrogel fibers in CPC had excellent proliferation and osteogenic differentiation. All three cells yielded high alkaline phosphatase, runt-related transcription factor, collagen I, and osteocalcin expressions (mean ± sd; n = 6). Cell-synthesized minerals increased substantially with time (p < 0.05), with no significant difference among the three types of cells (p > 0.1). Mineralization by hiPSC-MSCs, hESC-MSCs and hUCMSCs in CPC at 14 d was 13-fold that at 1 d. In conclusion, all three types of cells (hiPSC-MSCs, hESC-MSCs and hUCMSCs) in CPC scaffold showed high potential for bone tissue engineering, and the novel injectable CPC construct with cell-encapsulating hydrogel fibers is promising to enhance bone regeneration in dental, craniofacial and orthopedic applications. PMID:27811389

Hydrodynamics based transfection in normal and fibrotic rats

PubMed Central

Yeikilis, Rita; Gal, Shunit; Kopeiko, Natalia; Paizi, Melia; Pines, Mark; Braet, Filip; Spira, Gadi

2006-01-01

AIM: Hydrodynamics based transfection (HBT), the injection of a large volume of naked plasmid DNA in a short time is a relatively simple, efficient and safe method for in vivo transfection of liver cells. Though used for quite some time, the mechanism of gene transfection has not yet been elucidated. METHODS: A luciferase encoding plasmid was injected using the hydrodynamics based procedure into normal and thioacetamide-induced fibrotic Sprague Dawley rats. Scanning and transmission electron microscopy images were taken. The consequence of a dual injection of Ringer solution and luciferase pDNA was followed. Halofuginone, an anti collagen type I inhibitor was used to reduce ECM load in fibrotic rats prior to the hydrodynamic injection. RESULTS: Large endothelial gaps formed as soon as 10’ following hydrodynamic injection; these gradually returned to normal 10 d post injection. Hydrodynamic administration of Ringer 10 or 30 m prior to moderate injection of plasmid did not result in efficient transfection suggesting that endothelial gaps by themselves are not sufficient for gene expression. Gene transfection following hydrodynamic injection in thioacetamide induced fibrotic rats was diminished coinciding with the level of fibrosis. Halofuginone, a specific collagen typeIinhibitor, alleviated this effect. CONCLUSION: The hydrodynamic pressure formed following HBT results in the formation of large endothelial gaps. These gaps, though important in the transfer of DNA molecules from the blood to the space of Disse are not enough to provide the appropriate conditions for hepatocyte transfection. Hydrodynamics based injection is applicable in fibrotic rats provided that ECM load is reduced. PMID:17036386

Effect of Transpiration Injection on Skin Friction in an Internal Supersonic Flow

NASA Technical Reports Server (NTRS)

Castiglone, L. A.; Northam, G. B.; Baker, N. R.; Roe, L. A.

1996-01-01

An experimental program was conducted at NASA Langley Research Center that included development and evaluation of an operational facility for wall drag measurement of potential scramjet fuel injection or wall cooling configurations. The facility consisted of a supersonic tunnel, with one wall composed of a series of interchangeable aluminum plates attached to an air bearing suspension system. The system was equipped with load cells that measured drag forces of 115 psia (793 kPa). This flow field contained a train of weak, unsteady, reflecting shock waves that were produced in the Mach 2 nozzle flows, the effect of reflecting shocks (which are to be expected in scramjet combustors) in internal flows has not previously been documented.

Electrically injected GaAsBi/GaAs single quantum well laser diodes

NASA Astrophysics Data System (ADS)

Liu, Juanjuan; Pan, Wenwu; Wu, Xiaoyan; Cao, Chunfang; Li, Yaoyao; Chen, Xiren; Zhang, Yanchao; Wang, Lijuan; Yan, Jinyi; Zhang, Dongliang; Song, Yuxin; Shao, Jun; Wang, Shumin

2017-11-01

We present electrically injected GaAs/GaAsBi single quantum well laser diodes (LDs) emitting at a record long wavelength of 1141 nm at room temperature grown by molecular beam epitaxy. The LDs have excellent device performances with internal quantum efficiency of 86%, internal loss of 10 cm-1 and transparency current density of 196 A/cm2. The LDs can operate under continuous-wave mode up to 273 K. The characteristic temperature are extracted to be 125 K in the temperature range of 77˜150 K, and reduced to 90 K in the range of 150˜273 K. The temperature coefficient of 0.3 nm/K is extracted in the temperature range of 77˜273 K.

Fabrication of fillable microparticles and other complex 3D microstructures

NASA Astrophysics Data System (ADS)

McHugh, Kevin J.; Nguyen, Thanh D.; Linehan, Allison R.; Yang, David; Behrens, Adam M.; Rose, Sviatlana; Tochka, Zachary L.; Tzeng, Stephany Y.; Norman, James J.; Anselmo, Aaron C.; Xu, Xian; Tomasic, Stephanie; Taylor, Matthew A.; Lu, Jennifer; Guarecuco, Rohiverth; Langer, Robert; Jaklenec, Ana

2017-09-01

Three-dimensional (3D) microstructures created by microfabrication and additive manufacturing have demonstrated value across a number of fields, ranging from biomedicine to microelectronics. However, the techniques used to create these devices each have their own characteristic set of advantages and limitations with regards to resolution, material compatibility, and geometrical constraints that determine the types of microstructures that can be formed. We describe a microfabrication method, termed StampEd Assembly of polymer Layers (SEAL), and create injectable pulsatile drug-delivery microparticles, pH sensors, and 3D microfluidic devices that we could not produce using traditional 3D printing. SEAL allows us to generate microstructures with complex geometry at high resolution, produce fully enclosed internal cavities containing a solid or liquid, and use potentially any thermoplastic material without processing additives.

Quantification of Free Phenytoin by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS).

PubMed

Peat, Judy; Frazee, Clint; Garg, Uttam

2016-01-01

Phenytoin (diphenylhydantoin) is an anticonvulsant drug that has been used for decades for the treatment of many types of seizures. The drug is highly protein bound and measurement of free-active form of the drug is warranted particularly in patients with conditions that can affect drug protein binding. Here, we describe a LC/MS/MS method for the measurement of free phenytoin. Free drug is separated by ultrafiltration of serum or plasma. Ultrafiltrate is treated with acetonitrile containing internal standard phenytoin d-10 to precipitate proteins. The mixture is centrifuged and supernatant is injected onto LC-MS-MS, and analyzed using multiple reaction monitoring. This method is linear from 0.1 to 4.0 μg/mL and does not demonstrate any significant ion suppression or enhancement.

Successful use of botulinum toxin type a in the treatment of refractory postoperative dyspareunia.

PubMed

Park, Amy J; Paraiso, Marie Fidela R

2009-08-01

Refractory dyspareunia presents a challenging therapeutic dilemma. A woman with defecatory dysfunction and dyspareunia presented with stage 2 prolapse. She underwent laparoscopic and vaginal pelvic floor reconstruction with excision of endometriosis. The patient experienced increased dyspareunia and de novo vaginismus postoperatively that were refractory to trigger point injections, physical therapy, and medical and surgical management. She underwent botulinum toxin type A injections into her levator ani muscles, which allowed her to have sexual intercourse again after 2 years of apareunia with no recurrence of pain for 12 months. Injecting botulinum toxin into the levator ani muscles shows promise for postoperative patients who develop vaginismus and do not respond to conservative therapy.

Policy and programmatic considerations for introducing a longer-acting injectable contraceptive: perspectives of stakeholders from Kenya and Rwanda

PubMed Central

McKenna, Kevin; Arcara, Jennet; Rademacher, Kate H; Mackenzie, Caroline; Ngabo, Fidele; Munyambanza, Emmanuel; Wesson, Jennifer; Tolley, Elizabeth E

2014-01-01

ABSTRACT Background: More than 40 million women use injectable contraceptives to prevent pregnancy, and most current or previous injectable users report being satisfied with the method. However, while women may find injectables acceptable, they may not always find them accessible due to stock-outs and difficulties with returning to the clinic for reinjections. FHI 360 is spearheading efforts to develop a longer-acting injectable (LAI) contraceptive that could provide at least 6 months of protection against pregnancy. This article addresses systems-level considerations for the introduction of a new LAI. Methods: We conducted qualitative case studies in Kenya and Rwanda—two countries that have high levels of injectable use but with different service delivery contexts. Between June and September 2012, we conducted in-depth interviews with 27 service providers and 19 policy makers and program implementers focusing on 4 themes: systems-level barriers and facilitators to delivering LAI services; process for introducing an LAI; LAI distribution approaches; and potential LAI characteristics. We also obtained electronic feedback from 28 international family planning opinion leaders. Results: Respondents indicated strong interest in an LAI and thought it would appeal to existing injectable users as well as new family planning clients, both for spacing and for limiting births. Providers appreciated the potential for a lighter workload due to fewer follow-up visits, but they were concerned that fewer visits would also decrease their ability to help women manage side effects. The providers also appreciated the 1-month grace period for follow-up LAI injections; some seemed unaware of the latest international guidance that had increased the grace period from 2 weeks to 4 weeks for the currently available 3-month injectable. The majority of policy makers and program implementers were supportive of letting community health workers provide the method, but many nurses and midwives in Kenya had reservations about the approach. At the policy level, respondents indicated that obtaining regulatory approvals before introducing the new method could be costly and time-consuming. Manufacturing and procurement decisions could also affect cost and availability. Conclusions: Successful introduction of a potential longer-acting injectable may be enhanced by considering broader systemic issues, including managing cost to the health system and users, expanding access through community-based distribution, and training providers on the latest service delivery guidelines. PMID:25611479

Studying the Hurdles of Insulin Prescription (SHIP©): development, scoring and initial validation of a new self-administered questionnaire

PubMed Central

Martinez, Luc; Consoli, Silla M; Monnier, Louis; Simon, Dominique; Wong, Olivier; Yomtov, Bernard; Guéron, Béatrice; Benmedjahed, Khadra; Guillemin, Isabelle; Arnould, Benoit

2007-01-01

Background Although insulin therapy is well-accepted by symptomatic diabetic patients, it is still often delayed in less severe patients, in whom injectable insulin remains under-used. A better understanding of patients' perception of insulin would eventually help physicians to adopt the most appropriate dialogue when having to motivate patients to initiate or to intensify insulin injection. Methods The 'Studying the Hurdles of Insulin Prescription' (SHIP) questionnaire was developed based on a list of concepts derived from three diabetic patients' focus groups, and was included into two cross-sectional studies with similar design: SHIP Oral study and SHIP Premix study. Diabetic patients treated with oral hypoglycaemic agents (OHA; n = 1,494) and patients already treated with insulin (n = 1,150) completed the questionnaire at baseline, 6- and 12 months. Psychometric properties were assessed: 1) structure analysis by Principal Component Analysis (PCA) with Varimax rotation, 2) internal consistency reliability (Cronbach's alpha), and 3) concurrent validity (Spearman correlation coefficients with the Fear of Self-Injecting (FSI) score of the Diabetes Fear of Injecting and Self-testing Questionnaire. Reluctance/motivation towards insulin was assessed. Scores' ability to predict patients' insulin injection reluctance/motivation and initiation/intensification was evaluated with the Area Under the Receiver Operating Characteristic (ROC) Curve (AUC). Results PCA analysis confirmed the structure of the 14 items grouped into 3 dimensions: 'acceptance and motivation', 'fear and constraints', and 'restraints and barriers' towards insulin injection. Internal consistency reliability was excellent (Cronbach's alpha > 0.70); concurrent validity was good. The three scores were significantly predictive of patients' reluctance/motivation towards insulin injection initiation, as they were of patients' actual switch, except for the 'restraints and barriers' dimension. 'Acceptance and motivation' and 'fears and constraints' dimensions were also significantly predictive of patients' reluctance/motivation towards insulin intensification. By the end of the 12-month study, 179 of the initially OHA-treated patients had started insulin injections; 186 of the patients already treated with insulin had increased their injections. Conclusion The SHIP questionnaire provides reliable and valid assessment of diabetic patients' attitude towards insulin and injections. The predictive power of scores for patients' reluctance/motivation and actual treatment decisions demonstrates encouraging potential for further application in clinical practice. PMID:17727695

[Needle-free injection--science fiction or comeback of an almost forgotten drug delivery system?].

PubMed

Ziegler, Andreas

2007-08-01

The first to create a "needle-free injector" was the American anesthetist Robert A. Hingson, 65 year ago. Since that time those devices underwent a changeful history. In 1986 an outbreak of hepatitis B among patients receiving injections from a needle-free multiple-use-nozzle injector was documented and related to the use of the injector device. Due to such risk of transmission of infection with these reusable devices, their application has been restricted. In 1998 the WHO recommended that only conventional needles and syringes should be used for immunization until safe needle-free injectors are identified through independent safety testing. Since needle-free injection has shown numerous advantages in comparison to conventional injection, new systems were developed that combine the advantages of needle-free injection with sufficient safety in mass vaccination programs. As an alternative to this early injector type, the disposable-cartridge injectors were developed. The newest research field in the area of the needle-free injection systems opened with the development of powder injectors, in which the drug preparation is no longer a suspension or solution, but a powdered solid. This injector type using powder formulations shows a number of advantages in comparison with the conventional needle/syringe injection technique as well as towards the liquid jet injectors. Due to this new kind of injectors the comeback of the needle-free injection technique in large-scale vaccination programs of the WHO seems reasonable and within reach.

Negative ion source with hollow cathode discharge plasma

DOEpatents

Hershcovitch, Ady; Prelec, Krsto

1983-01-01

A negative ion source of the type where negative ions are formed by bombarding a low-work-function surface with positive ions and neutral particles from a plasma, wherein a highly ionized plasma is injected into an anode space containing the low-work-function surface. The plasma is formed by hollow cathode discharge and injected into the anode space along the magnetic field lines. Preferably, the negative ion source is of the magnetron type.

The research of new type stratified water injection process intelligent measurement technology

NASA Astrophysics Data System (ADS)

Zhao, Xin

2017-10-01

To meet the needs of injection and development of Daqing Oilfield, the injection of oil from the early stage of general water injection to the subdivision of water is the purpose of improving the utilization degree and the qualified rate of water injection, improving the performance of water injection column and the matching process. Sets of suitable for high water content of the effective water injection technology supporting technology. New layered water injection technology intelligent measurement technology will be more information testing and flow control combined into a unified whole, long-term automatic monitoring of the work of the various sections, in the custom The process has the characteristics of "multi-layer synchronous measurement, continuous monitoring of process parameters, centralized admission data", which can meet the requirement of subdivision water injection, but also realize the automatic synchronization measurement of each interval, greatly improve the efficiency of tiered injection wells to provide a new means for the remaining oil potential.

[New approaches in the treatment of short stature].

PubMed

Zung, Amnon; Zadik, Zvi

2002-12-01

Over the past years, the efforts to improve the final height of children with short stature has yielded new modalities of therapy. New types of injection devices, mainly ready-to-use injection pens with multi-dose vials of reconstituted growth hormone (GH), have made the treatment technically easier and less stressful for the patients. A new type of slow-release GH injected once or twice a month has recently been studied. In addition, several types of synthetic GH-secretagogues were examined, with the advantage of being introduced by the oral or nasal route. The recognition of the pivotal role of estrogens in skeletal maturation and subsequent growth arrest, was the basis for the use of aromatase inhibitor in a pioneering study, with promising results. We have concluded the review with an update on the benefit of GH therapy in children with normal short stature, based on 12 studies that provided data on the final height of these children.

The influence of an uncertain force environment on reshaping trial-to-trial motor variability.

PubMed

Izawa, Jun; Yoshioka, Toshinori; Osu, Rieko

2014-09-10

Motor memory is updated to generate ideal movements in a novel environment. When the environment changes every trial randomly, how does the brain incorporate this uncertainty into motor memory? To investigate how the brain adapts to an uncertain environment, we considered a reach adaptation protocol where individuals practiced moving in a force field where a noise was injected. After they had adapted, we measured the trial-to-trial variability in the temporal profiles of the produced hand force. We found that the motor variability was significantly magnified by the adaptation to the random force field. Temporal profiles of the motor variance were significantly dissociable between two different types of random force fields experienced. A model-based analysis suggests that the variability is generated by noise in the gains of the internal model. It further suggests that the trial-to-trial motor variability magnified by the adaptation in a random force field is generated by the uncertainty of the internal model formed in the brain as a result of the adaptation.

Effects of hemisphere speech dominance and seizure focus on patterns of behavioral response errors for three types of stimuli.

PubMed

Rausch, R; MacDonald, K

1997-03-01

We used a protocol consisting of a continuous presentation of stimuli with associated response requests during an intracarotid sodium amobarbital procedure (IAP) to study the effects of hemisphere injected (speech dominant vs. nondominant) and seizure focus (left temporal lobe vs. right temporal lobe) on the pattern of behavioral response errors for three types of visual stimuli (pictures of common objects, words, and abstract forms). Injection of the left speech dominant hemisphere compared to the right nondominant hemisphere increased overall errors and affected the pattern of behavioral errors. The presence of a seizure focus in the contralateral hemisphere increased overall errors, particularly for the right temporal lobe seizure patients, but did not affect the pattern of behavioral errors. Left hemisphere injections disrupted both naming and reading responses at a rate similar to that of matching-to-sample performance. Also, a short-term memory deficit was observed with all three stimuli. Long-term memory testing following the left hemisphere injection indicated that only for pictures of common objects were there fewer errors during the early postinjection period than for the later long-term memory testing. Therefore, despite the inability to respond to picture stimuli, picture items, but not words or forms, could be sufficiently encoded for later recall. In contrast, right hemisphere injections resulted in few errors, with a pattern suggesting a mild general cognitive decrease. A selective weakness in learning unfamiliar forms was found. Our findings indicate that different patterns of behavioral deficits occur following the left vs. right hemisphere injections, with selective patterns specific to stimulus type.

Determining the Area of Review for Industrial Waste Disposal Wells.

DTIC Science & Technology

1981-12-01

pressure increases sufficiently to force formation fluids and/or injected wastes up abandoned well bores to contaminate underground sources of drinking...Drilling Mud Circulating System . . 72 9. Increase in Gel Strength of Various Mud Types With Time . . . . . . . . . . . . . . . . . . 96 10. Gel... increased fluid pressure in a disposal zone which results from a waste injection operation may force injected and/or formation fluid to migrate up an

Huangqi injection (a traditional Chinese patent medicine) for chronic heart failure: a systematic review.

PubMed

Fu, Shufei; Zhang, Junhua; Menniti-Ippolito, Francesca; Gao, Xiumei; Galeotti, Francesca; Massari, Marco; Hu, Limin; Zhang, Boli; Ferrelli, Rita; Fauci, Alice; Firenzuoli, Fabio; Shang, Hongcai; Guerra, Ranieri; Raschetti, Roberto

2011-05-06

Chronic heart failure (CHF) is a global public health problem. Therefore, novel and effective drugs that show few side-effects are needed. Early literature studies indicated that Huangqi injection is one of the most commonly used traditional Chinese patent medicines for CHF in China. As a large number of clinical studies has been carried out and published, it is essential to evaluate the effectiveness and safety of Huangqi injection. Therefore, we carried out this systematic review under the support of the framework of the Joint Sino-Italian Laboratory (JoSIL). To evaluate the efficacy and safety of Huangqi injection for CHF according to the available scientific knowledge. An extensive search including PubMed, EMBASE, CBM, the Cochrane Library and Chinese literature databases was performed up to July 2008. Clinical trials regarding Huangqi injection for the treatment of CHF were searched for, irrespective of languages. The quality of each trial was assessed according to the Cochrane Reviewers' Handbook 5.0, and RevMan 5.0 provided by the Cochrane Collaboration and STATA 9.2 were used for data analysis. After selection of 1,205 articles, 62 RCTs and quasi-RCTs conducted in China and published in Chinese journals were included in the review. The methodological quality of the trials was low. In most trials inclusion and exclusion criteria were not specified. Furthermore, only one study evaluated the outcomes for drug efficacy after an adequate period of time. For these reasons and because of the different baseline characteristics we did not conduct a meta-analysis. Although available studies are not adequate to draw a conclusion on the efficacy and safety of Huangqi injection (a traditional Chinese patent medicine), we hope that our work could provide useful experience on further studies on Huangqi injections. The overall level of TCM clinical research needs to be improved so that the efficacy of TCM can be evaluated by the international community and possibly some TCM can enter into the international market.

Sphincter of Oddi botulinum toxin injection to prevent pancreatic fistula after distal pancreatectomy.

PubMed

Hackert, Thilo; Klaiber, Ulla; Hinz, Ulf; Kehayova, Tzveta; Probst, Pascal; Knebel, Phillip; Diener, Markus K; Schneider, Lutz; Strobel, Oliver; Michalski, Christoph W; Ulrich, Alexis; Sauer, Peter; Büchler, Markus W

2017-05-01

Postoperative pancreatic fistula represents the most important complication after distal pancreatectomy. The aim of this study was to evaluate the use of a preoperative endoscopic injection of botulinum toxin into the sphincter of Oddi to prevent postoperative pancreatic fistula (German Clinical Trials Register number: DRKS00007885). This was an investigator-initiated, prospective clinical phase I/II trial with an exploratory study design. We included patients who underwent preoperative endoscopic sphincter botulinum toxin injection (100 units of Botox). End points were the feasibility, safety, and postoperative outcomes, including postoperative pancreatic fistula within 30 days after distal pancreatectomy. Botulinum toxin patients were compared with a control collective of patients undergoing distal pancreatectomy without botulinum toxin injection by case-control matching in a 1:1 ratio. Between February 2015 and February 2016, 29 patients were included. All patients underwent successful sphincter of Oddi botulinum toxin injection within a median of 6 (range 0-10) days before operation. One patient had an asymptomatic, self-limiting (48 hours) increase in serum amylase and lipase after injection. Distal pancreatectomy was performed in 24/29 patients; 5 patients were not resectable. Of the patients receiving botulinum toxin, 7 (29%) had increased amylase levels in drainage fluid on postoperative day 3 (the International Study Group of Pancreatic Surgery definition of postoperative pancreatic fistula grade A) without symptoms or need for reintervention. Importantly, no clinically relevant fistulas (International Study Group of Pancreatic Surgery grades B/C) were observed in botulinum toxin patients compared to 33% postoperative pancreatic fistula grade B/C in case-control patients (P < .004). Preoperative sphincter of Oddi botulinum toxin injection is a novel and safe approach to decrease the incidence of clinically relevant postoperative pancreatic fistula after distal pancreatectomy. The results of the present trial suggest its efficacy in the prevention of clinically relevant postoperative pancreatic fistula and are validated currently in the German Federal Government-sponsored, multicenter, randomized controlled PREBOT trial. Copyright © 2016 Elsevier Inc. All rights reserved.

Effect of a single injection of autologous conditioned serum (ACS) on tendon healing in equine naturally occurring tendinopathies.

PubMed

Geburek, Florian; Lietzau, Maren; Beineke, Andreas; Rohn, Karl; Stadler, Peter M

2015-06-26

Autologous blood-derived biologicals, including autologous conditioned serum (ACS), are frequently used to treat tendinopathies in horses despite limited evidence for their efficacy. The purpose of this study was to describe the effect of a single intralesional injection of ACS in naturally occurring tendinopathies of the equine superficial digital flexor tendon (SDFT) on clinical, ultrasonographic, and histological parameters. Fifteen horses with 17 naturally occurring tendinopathies of forelimb SDFTs were examined clinically and ultrasonographically (day 0). Injured tendons were randomly assigned to the ACS-treated group (n = 10) receiving a single intralesional ACS injection or included as controls (n = 7) which were either untreated or injected with saline on day 1. All horses participated in a gradually increasing exercise programme and were re-examined nine times at regular intervals until day 190. Needle biopsies were taken from the SDFTs on days 0, 36 and 190 and examined histologically and for the expression of collagen types I and III by immunohistochemistry. In ACS-treated limbs lameness decreased significantly until day 10 after treatment. Swelling (scores) of the SDFT region decreased within the ACS group between 50 and 78 days after treatment. Ultrasonographically, the percentage of the lesion in the tendon was significantly lower and the echogenicity of the lesion (total echo score) was significantly higher 78 and 106 days after intralesional ACS injection compared to controls. Histology revealed that, compared to controls, tenocyte nuclei were more spindle-shaped 36 days after ACS injection. Immunohistochemistry showed that collagen type I expression significantly increased between days 36 and 190 after ACS injection. Single intralesional ACS injection of equine SDFTs with clinical signs of acute tendinopathy contributes to an early significant reduction of lameness and leads to temporary improvement of ultrasonographic parameters of repair tissue. Intralesional ACS treatment might decrease proliferation of tenocytes 5 weeks after treatment and increase their differentiation as demonstrated by elevated collagen type I expression in the remodelling phase. Potential enhancement of these effects by repeated injections should be tested in future controlled clinical investigations.

Mental Health and Family Relations: Correlated Reports from People Who Inject Drugs and their Family Members in Vietnam

PubMed Central

Li, Li; Tuan, Nguyen Anh; Liang, Li-Jung; Lin, Chunqing; Farmer, Shu C.; Flore, Martin

2013-01-01

Background This article explores the association of people who inject drugs and their family members in terms of mental health and family relations. The objective was to understand the family context and its impact on people who inject drugs in a family-oriented culture in Vietnam. Methods Cross-sectional assessment data were gathered from 83 people who inject drugs and 83 of their family members recruited from four communes in Phú Thọ province, Vietnam. Depressive symptoms and family relations were measured for both people who inject drugs and family members. Internalized shame and drug-using behavior were reported by people who inject drugs, and caregiver burden was reported by family members. Results We found that higher level of drug using behavior of people who inject drugs was significantly associated with higher depressive symptoms and lower family relations reported by themselves as well as their family members. Family relations reported by people who inject drugs and their family members were positively correlated. Conclusion The findings highlight the need for interventions that address psychological distress and the related challenges faced by family members of people who inject drugs. The article has policy implication which concludes with an argument for developing strategies that enhance the role of families in supporting behavioral change of people who inject drugs. PMID:23910167

Mental health and family relations among people who inject drugs and their family members in Vietnam.

PubMed

Li, Li; Tuan, Nguyen Anh; Liang, Li-Jung; Lin, Chunqing; Farmer, Shu C; Flore, Martin

2013-11-01

This article explores the association of people who inject drugs and their family members in terms of mental health and family relations. The objective was to understand the family context and its impact on people who inject drugs in a family-oriented culture in Vietnam. Cross-sectional assessment data were gathered from 83 people who inject drugs and 83 of their family members recruited from four communes in Phú Thọ province, Vietnam. Depressive symptoms and family relations were measured for both people who inject drugs and family members. Internalized shame and drug-using behavior were reported by people who inject drugs, and caregiver burden was reported by family members. We found that higher level of drug using behavior of people who inject drugs was significantly associated with higher depressive symptoms and lower family relations reported by themselves as well as their family members. Family relations reported by people who inject drugs and their family members were positively correlated. The findings highlight the need for interventions that address psychological distress and the related challenges faced by family members of people who inject drugs. The article has policy implication which concludes with an argument for developing strategies that enhance the role of families in supporting behavioral change among people who inject drugs. Copyright © 2013 Elsevier B.V. All rights reserved.

Sensor-augmented pump therapy lowers HbA(1c) in suboptimally controlled Type 1 diabetes; a randomized controlled trial.

PubMed

Hermanides, J; Nørgaard, K; Bruttomesso, D; Mathieu, C; Frid, A; Dayan, C M; Diem, P; Fermon, C; Wentholt, I M E; Hoekstra, J B L; DeVries, J H

2011-10-01

To investigate the efficacy of sensor-augmented pump therapy vs. multiple daily injection therapy in patients with suboptimally controlled Type 1 diabetes. In this investigator-initiated multi-centre trial (the Eurythmics Trial) in eight outpatient centres in Europe, we randomized 83 patients with Type 1 diabetes (40 women) currently treated with multiple daily injections, age 18-65 years and HbA(1c) ≥ 8.2% (≥ 66 mmol/mol) to 26 weeks of treatment with either a sensor-augmented insulin pump (n = 44) (Paradigm(®) REAL-Time) or continued with multiple daily injections (n = 39). Change in HbA(1c) between baseline and 26 weeks, sensor-derived endpoints and patient-reported outcomes were assessed. The trial was completed by 43/44 (98%) patients in the sensor-augmented insulin pump group and 35/39 (90%) patients in the multiple daily injections group. Mean HbA(1c) at baseline and at 26 weeks changed from 8.46% (SD 0.95) (69 mmol/mol) to 7.23% (SD 0.65) (56 mmol/mol) in the sensor-augmented insulin pump group and from 8.59% (SD 0.82) (70 mmol/mol) to 8.46% (SD 1.04) (69 mmol/mol) in the multiple daily injections group. Mean difference in change in HbA(1c) after 26 weeks was -1.21% (95% confidence interval -1.52 to -0.90, P < 0.001) in favour of the sensor-augmented insulin pump group. This was achieved without an increase in percentage of time spent in hypoglycaemia: between-group difference 0.0% (95% confidence interval -1.6 to 1.7, P = 0.96). There were four episodes of severe hypoglycaemia in the sensor-augmented insulin pump group and one episode in the multiple daily injections group (P = 0.21). Problem Areas in Diabetes and Diabetes Treatment Satisfaction Questionnaire scores improved in the sensor-augmented insulin pump group. Sensor augmented pump therapy effectively lowers HbA(1c) in patients with Type 1 diabetes suboptimally controlled with multiple daily injections. © 2011 The Authors. Diabetic Medicine © 2011 Diabetes UK.

Efficacy and Safety of Single Botulinum Toxin Type A (Botox®) Injection for Relief of Upper Trapezius Myofascial Trigger Point: A Randomized, Double-Blind, Placebo-Controlled Study.

PubMed

Kwanchuay, Photsawee; Petchnumsin, Thavatchai; Yiemsiri, Pichet; Pasuk, Nakkamol; Srikanok, Wannarat; Hathaiareerug, Chanasak

2015-12-01

Botulinum toxin injection has been applied for pain relief in various chronic pain syndromes. Recently, systematic review studies reported inconclusive effects of Botulinum toxin in myofascial pain management. The present study aimed to demonstrate the efficacy and safety of Botulinum toxin type A (BTxA) (Botox®) injection for pain reduction in myofascial trigger point (MTrP) of the upper trapezius muscle. Thirty-three patients with 48 MTrP on the upper trapezius muscles over three months with moderate to severe pain intensity diagnosed at physical medicine and rehabilitation outpatient department were recruited between December 2011 and March 2012. Eligible patients were blinded and randomly injected with single 0.2 ml (20 IU) of BTxA for 24 MTrP and 0.2 ml of 0.9% NaCl solution for 24 MTrP at the most tender trigger point on the upper trapezius muscle. All patients were advised for stretching exercise and ergonomic adaptation throughout the study. At 3- and 6-week after injections, visual analogue scale (VAS), the pressure pain threshold (PPT), and reported adverse effects were measured. Both BTxA and control groups demonstrated statistically significant differences in VAS reduction and increased PPT after 3 weeks and 6 weeks compared with before treatment. There were no statistically significant differences in VAS reduction from baseline between the two groups at 3- and 6-week after treatment. A statistically significant difference in improvement of PPT from baseline and 6-week after BTxA injection compared with 0.9% NaCl group was shown (1.0 ± 0.9 and 0.5 ± 0.7, p = 0.036). There was mild degree side-effects that spontaneous resolved within one week in both groups without significant difference in percentage. No severe adverse effects were reported during the study. The efficacy in VAS reduction of a single 20 IU of Botulinum toxin type A (Botox®) injection was not different from 0.9% NaCl for myofascial trigger point at the upper trapezius muscle. However Botulinum toxin type A (Botox®) showed statistically significant more increased in pressure pain threshold at 6-week after injection without severe adverse effects.

Transition to injecting drug use in Iran: a systematic review of qualitative and quantitative evidence

PubMed Central

Rahimi-Movaghar, Afarin; Amin-Esmaeili, Masoumeh; Shadloo, Behrang; Malekinejad, Mohsen

2015-01-01

Background Injection drug use has been increasing over the past decade in Iran. This study aims to review the epidemiological and qualitative evidence on factors that facilitate or protect against transition to injection in Iran. Methods Five international (Medline, Web of Science, EMBASE, CINAHL, PsycINFO), one regional (IMEMR) and three Iranian (Iranmedex, Iranpsych, IranDoc) databases were searched and key experts were contacted. Two trained researchers screened documents to identify relevant studies and independently extracted data using a pre-specified protocol. A thematic analysis was applied to the qualitative data and a random effect meta-analysis model was used to determine age of first injection. Results A total of 39 documents from 31 studies met the eligibility criteria; more than 50% were conducted between 2006 and 2008. The weighted mean age of first injection was 25.8 years (95% Confidence Interval: 25.3–26.2). Overall, drug users had used drugs for 6 to 7 years before starting to inject. Heroin was the first drug of injection in the majority of cases. Factors influencing transition to injection included 1) individual (pleasure-seeking behavior and development of drug dependency), 2) social network (role of peer drug users in first injection use), and 3) environmental (the economic efficiency associated with injection and the wide availability of injectable form of drugs in the market). Conclusion Harm reduction policies in Iran have almost exclusively focused on drug injectors. However, given the extent of non-injection drug use, evidence from this study can provide insight on points of interventions for preventing transition to injection use. PMID:26210009

Treatment of hemorrhoids: A coloproctologist’s view

PubMed Central

Lohsiriwat, Varut

2015-01-01

Hemorrhoids is recognized as one of the most common medical conditions in general population. It is clinically characterized by painless rectal bleeding during defecation with or without prolapsing anal tissue. Generally, hemorrhoids can be divided into two types: internal hemorrhoid and external hemorrhoid. External hemorrhoid usually requires no specific treatment unless it becomes acutely thrombosed or causes patients discomfort. Meanwhile, low-graded internal hemorrhoids can be effectively treated with medication and non-operative measures (such as rubber band ligation and injection sclerotherapy). Surgery is indicated for high-graded internal hemorrhoids, or when non-operative approaches have failed, or complications have occurred. Although excisional hemorrhoidectomy remains the mainstay operation for advanced hemorrhoids and complicated hemorrhoids, several minimally invasive operations (including Ligasure hemorrhoidectomy, doppler-guided hemorrhoidal artery ligation and stapled hemorrhoidopexy) have been introduced into surgical practices in order to avoid post-hemorrhiodectomy pain. This article deals with some fundamental knowledge and current treatment of hemorrhoids in a view of a coloproctologist - which includes the management of hemorrhoids in complicated situations such as hemorrhoids in pregnancy, hemorrhoids in immunocompromised patients, hemorrhoids in patients with cirrhosis or portal hypertension, hemorrhoids in patients having antithrombotic agents, and acutely thrombosed or strangulated hemorrhoids. Future perspectives in the treatment of hemorrhoids are also discussed. PMID:26309351

Reversed-phase HPLC analysis of levetiracetam in tablets using monolithic and conventional C18 silica columns.

PubMed

Can, Nafiz O; Arli, Goksel

2010-01-01

Development and validation of an RP-HPLC method for determination of levetiracetam in pharmaceutical tablets is described. The separation and quantification of levetiracetam and caffeine (internal standard) were performed using a single analytical procedure with two different types of stationary phases, conventional Phenomenex Gemini C18 (100 x 4.6 mm, 5 microm) and Merck Chromolith Performance RP18e (100 x 4.6 mm, macropore size 2 mm, micropore size 13 nm) monolithic silica. Five-microliter aliquots of samples were injected into the system and eluted using water-acetonitrile (90 + 10, v/v) mobile phase pumped at the rate of 1 mL/min. The analyte peaks were detected at 200 nm using a diode array detector with adequate resolution. Validation studies were performed using the method recommended by the International Conference on Harmonization, the U.S. Pharmacopeia, and AOAC INTERNATIONAL, which includes accuracy, precision, range, limits, robustness, and system suitability parameters. Levetiracetam and caffeine were detected in about 7 min using the conventional column, whereas less than 5 min was required when the monolithic column was used. Calibration plots had r values close to unity in the range of 0.8-8.0 microg/mL. Assay of levetiracetam in a tablet formulation was demonstrated as an application to real samples.

High-pressure Injection Injuries of the Hand.

PubMed

Cannon, Tyler A

2016-07-01

High-pressure injection hand injuries are often overlooked, with severe complications owing to the acute inflammatory response. Prognosis for depends on the type of material injected, location of injection, involved pressure, and timing to surgical decompression and debridement. Acute management involves broad-spectrum antibiotics, tetanus prophylaxis, emergent decompression within 6 hours, and complete removal of the injected material. Most patients have residual sequelae of stiffness, pain, sensation loss, and difficulties in returning to work. The hand surgeon's role is prompt surgical intervention, early postoperative motion, and education of patient and staff regarding short- and long-term expectations. Copyright © 2016 Elsevier Inc. All rights reserved.

Polychromator for the edge Thomson scattering system in ITER.

PubMed

Yatsuka, E; Hatae, T; Fujie, D; Kurokawa, A; Kusama, Y

2012-10-01

A new type polychromator has been designed for the edge Thomson scattering system in ITER. Signal light is parallelly dispersed into two parts at the first interference filter. Spectral transmissivities for some spectral channels may enhance better than the conventional type polychromator. In the new type polychromator, the misalignment due to the machine accuracy is expected to be within the margin of APD area. In order to calibrate the spectral transmissivity using the dual-laser injection method during the plasma discharge, it is preferred that the spectral channels are separated at the geometric mean of the injected two wavelengths.

Highly efficient and low voltage silver nanowire-based OLEDs employing a n-type hole injection layer.

PubMed

Lee, Hyungjin; Lee, Donghwa; Ahn, Yumi; Lee, Eun-Woo; Park, Lee Soon; Lee, Youngu

2014-08-07

Highly flexible and efficient silver nanowire-based organic light-emitting diodes (OLEDs) have been successfully fabricated by employing a n-type hole injection layer (HIL). The silver nanowire-based OLEDs without light outcoupling structures exhibited excellent device characteristics such as extremely low turn-on voltage (3.6 V) and high current and power efficiencies (44.5 cd A(-1) and 35.8 lm W(-1)). In addition, flexible OLEDs with the silver nanowire transparent conducting electrode (TCE) and n-type HIL fabricated on plastic substrates showed remarkable mechanical flexibility as well as device performance.

Liquid-type Botulinum Toxin Type A in Adductor Spasmodic Dysphonia: A Prospective Pilot Study.

PubMed

Cha, Wonjae; Jang, Jeon Yeob; Wang, Soo-Geun; Kang, Ji-Heon; Jo, Min-Gyu

2017-05-01

Botulinum toxin (BTX) has been widely used to treat adductor spasmodic dysphonia (ADSD). Most commercially available forms of BTX require reconstitution before use, which may increase the risk of contamination and requires careful titration. Recently, a liquid-type BTX type A (BTX-A) has been developed, which should simplify the procedure and enhance its efficacy. Herein, we present a prospective pilot study to investigate the efficacy and safety of liquid-type BTX-A in the treatment of ADSD. Twenty-six consecutive liquid-type BTX-A injections were performed in 12 patients with ADSD. We included as a control group 34 consecutive patients with ADSD who had previously undergone 52 vocal fold injection procedures with freeze-dried-type BTX-A. All patients in both groups had improvement of symptoms related to ADSD and period of normal voice. Most patients experienced breathiness, and the onset time, the peak response time, and the duration of breathiness were similar in both groups. The duration of effect (days) was 96.96 ± 18.91 and 77.38 ± 18.97 in the freeze-dried-type and the liquid-type groups, and the duration of benefit (days) was 80.02 ± 18.24 and 62.69 ± 19.73 in the freeze-dried-type and the liquid-type groups. To compare the efficacy between the freeze-dried-type and the liquid-type BTX-A, the sessions of the unilateral vocal fold injection were included and were categorized as group A (1 ~ 2 units BTX-A) and group B (2 ~ 3 units BTX-A), according to the dose per vocal fold. There was no significant difference of effect time between freeze-dried-type and liquid-type BTX-A groups. No adverse events related to BTX or vocal fold injection were reported. Liquid-type BTX-A is safe and effective for the treatment of spasmodic dysphonia. With the advantages of simple preparation, storage, and reuse and animal protein-free constituents, liquid-type BTX-A may be a good option in the treatment of spasmodic dysphonia. Copyright © 2017 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

Acute inflammation induces segmental, bilateral, supraspinally mediated opioid release in the rat spinal cord, as measured by μ-opioid receptor internalization

PubMed Central

Chen, Wenling; Marvizón, Juan Carlos G.

2009-01-01

The objective of this study was to measure opioid release in the spinal cord during acute and long-term inflammation using μ-opioid receptor (MOR) internalization. In particular, we determined whether opioid release occurs in the segments receiving the noxious signals or in the entire spinal cord, and whether it involves supraspinal signals. Internalization of neurokinin 1 receptors (NK1Rs) was measured to track the intensity of the noxious stimulus. Rats received peptidase inhibitors intrathecally to protect opioids from degradation. Acute inflammation of the hindpaw with formalin induced moderate MOR internalization in the L5 segment bilaterally, whereas NK1R internalization occurred only ipsilaterally. MOR internalization was restricted to the lumbar spinal cord, regardless of whether the peptidase inhibitors were injected in a lumbar or thoracic site. Formalin-induced MOR internalization was substantially reduced by isoflurane anesthesia. It was also markedly reduced by a lidocaine block of the cervical-thoracic spinal cord (which did not affect the evoked NK1R internalization) indicating that spinal opioid release is mediated supraspinally. In the absence of peptidase inhibitors, formalin and hindpaw clamp induced a small amount of MOR internalization, which was significantly higher than in controls. To study spinal opioid release during chronic inflammation, we injected Complete Freund's Adjuvant (CFA) in the hindpaw and peptidase inhibitors intrathecally. Two days later, no MOR or NK1R internalization was detected. Furthermore, CFA inflammation decreased MOR internalization induced by clamping the inflamed hindpaw. These results show that acute inflammation, but not chronic inflammation, induce segmental opioid release in the spinal cord that involves supraspinal signals. PMID:19298846

Internalized Homonegativity and Substance Use Among U.S. Men Who Have Sex with Men Only (MSMO) and Men Who Have Sex with Men and Women (MSMW).

PubMed

Jeffries, William L; Johnson, Oshea D

2018-03-21

Internalized homonegativity may promote substance use among U.S. men who have sex with men only (MSMO) and men who have sex with men and women (MSMW). However, studies have produced mixed findings, used non-representative samples, and not adequately examined MSMW. We investigated (1) internalized homonegativity in relation to substance use and (2) the extent of temporal change in internalized homonegativity among MSMO and MSMW. Using merged 2002, 2006-2010, and 2011-2013 cycles of the National Survey of Family Growth-a nationally representative U.S. sample of persons aged 15-44 years-we acquired subsamples of MSMO (n = 419) and MSMW (n = 195). Rao-Scott chi-square tests examined internalized homonegativity in relation to past-month binge drinking and use of marijuana. These tests examined past-year use of any illicit substance, cocaine, crack, injection drugs, and methamphetamine. Multivariable logistic regression models controlled for covariates. Rao-Scott chi-square tests examined temporal changes in internalized homonegativity. Among MSMO, internalized homonegativity was associated with increased odds of using any illicit substance, cocaine, and methamphetamine. Among MSMW, however, internalized homonegativity was associated with decreased odds of using any illicit substance, cocaine, crack, injection drugs, and methamphetamine. The proportion of MSMO and MSMW who expressed internalized homonegativity did not significantly change during 2002-2013. Conclusions/Importance: Internalized homonegativity may be positively associated with substance use among MSMO, but negatively associated with substance use among MSMW. Future studies should seek to better understand internalized homonegativity and other determinants of substance use among MSMO and MSMW.

Acute inflammation induces segmental, bilateral, supraspinally mediated opioid release in the rat spinal cord, as measured by mu-opioid receptor internalization.

PubMed

Chen, W; Marvizón, J C G

2009-06-16

The objective of this study was to measure opioid release in the spinal cord during acute and long-term inflammation using mu-opioid receptor (MOR) internalization. In particular, we determined whether opioid release occurs in the segments receiving the noxious signals or in the entire spinal cord, and whether it involves supraspinal signals. Internalization of neurokinin 1 receptors (NK1Rs) was measured to track the intensity of the noxious stimulus. Rats received peptidase inhibitors intrathecally to protect opioids from degradation. Acute inflammation of the hind paw with formalin induced moderate MOR internalization in the L5 segment bilaterally, whereas NK1R internalization occurred only ipsilaterally. MOR internalization was restricted to the lumbar spinal cord, regardless of whether the peptidase inhibitors were injected in a lumbar or thoracic site. Formalin-induced MOR internalization was substantially reduced by isoflurane anesthesia. It was also markedly reduced by a lidocaine block of the cervical-thoracic spinal cord (which did not affect the evoked NK1R internalization) indicating that spinal opioid release is mediated supraspinally. In the absence of peptidase inhibitors, formalin and hind paw clamp induced a small amount of MOR internalization, which was significantly higher than in controls. To study spinal opioid release during chronic inflammation, we injected complete Freund's adjuvant (CFA) in the hind paw and peptidase inhibitors intrathecally. Two days later, no MOR or NK1R internalization was detected. Furthermore, CFA inflammation decreased MOR internalization induced by clamping the inflamed hind paw. These results show that acute inflammation, but not chronic inflammation, induces segmental opioid release in the spinal cord that involves supraspinal signals.

In vivo imaging of the inflammatory receptor CD40 after cerebral ischemia using a fluorescent antibody.

PubMed

Klohs, Jan; Gräfe, Michael; Graf, Kristof; Steinbrink, Jens; Dietrich, Thore; Stibenz, Dietger; Bahmani, Peyman; Kronenberg, Golo; Harms, Christoph; Endres, Matthias; Lindauer, Ute; Greger, Klaus; Stelzer, Ernst H K; Dirnagl, Ulrich; Wunder, Andreas

2008-10-01

Brain inflammation is a hallmark of stroke, where it has been implicated in tissue damage as well as in repair. Imaging technologies that specifically visualize these processes are highly desirable. In this study, we explored whether the inflammatory receptor CD40 can be noninvasively and specifically visualized in mice after cerebral ischemia using a fluorescent monoclonal antibody, which we labeled with the near-infrared fluorescence dye Cy5.5 (Cy5.5-CD40MAb). Wild-type and CD40-deficient mice were subjected to transient middle cerebral artery occlusion. Mice were either intravenously injected with Cy5.5-CD40MAb or control Cy5.5-IgGMAb. Noninvasive and ex vivo near-infrared fluorescence imaging was performed after injection of the compounds. Probe distribution and specificity was further assessed with single-plane illumination microscopy, immunohistochemistry, and confocal microscopy. Significantly higher fluorescence intensities over the stroke-affected hemisphere, compared to the contralateral side, were only detected noninvasively in wild-type mice that received Cy5.5-CD40MAb, but not in CD40-deficient mice injected with Cy5.5-CD40MAb or in wild-type mice that were injected with Cy5.5-IgGMAb. Ex vivo near-infrared fluorescence showed an intense fluorescence within the ischemic territory only in wild-type mice injected with Cy5.5-CD40MAb. In the brains of these mice, single-plane illumination microscopy demonstrated vascular and parenchymal distribution, and confocal microscopy revealed a partial colocalization of parenchymal fluorescence from the injected Cy5.5-CD40MAb with activated microglia and blood-derived cells in the ischemic region. The study demonstrates that a CD40-targeted fluorescent antibody enables specific noninvasive detection of the inflammatory receptor CD40 after cerebral ischemia using optical techniques.

Immunological aspects of circulating DNA.

PubMed

Anker, Philippe; Stroun, Maurice

2006-09-01

Nude mice were injected with DNA released by T lymphocytes previously exposed to inactivated herpes symplex type 1 or polio viruses. The serum of these mice was tested for its neutralizing activity. Injected nude mice synthesized antiherpetic or antipolio antibodies, depending on the antigen used to sensitize the T lymphocytes. Mice injected with DNA released by human T cells produced antibodies carrying human allotypes as they could be neutralized by antiallotype sera. However, mice that were injected with DNA released by antigen-stimulated murine T lymphocytes produced antiviral antibodies, which were not neutralized by anti-human allotype sera.

Recent Developments in the Use of Intralesional Injections Keloid Treatment

PubMed Central

Trisliana Perdanasari, Aurelia; Lazzeri, Davide; Su, Weijie; Xi, Wenjing; Zheng, Zhang; Ke, Li; Min, Peiru; Feng, Shaoqing; Persichetti, Paolo

2014-01-01

Keloid scars are often considered aesthetically unattractive and frustrating problems that occur following injuries. They cause functional and cosmetic deformities, displeasure, itching, pain, and psychological stress and possibly affect joint movement. The combination of these factors ultimately results in a compromised quality of life and diminished functional performance. Various methods have been implemented to improve keloid scars using both surgical and non-surgical approaches. However, it has proven to be a challenge to identify a universal treatment that can deliver optimal results for all types of scars. Through a PubMed search, we explored most of the literature that is available about the intralesional injection treatment of hypertrophic scars and keloids and highlights both current (corticosteroid, 5-fluorouracil, bleomycin, interferon, cryotherapy and verapamil) and future treatments (interleukin-10 and botulinum toxin type A). The reference lists of retrieved articles were also analysed. Information was gathered about the mechanism of each injection treatment, its benefits and associated adverse reactions, and possible strategies to address adverse reactions to provide reliable guidelines for determining the optimal treatment for particular types of keloid scars. This article will benefit practitioners by outlining evidence-based treatment strategies using intralesional injections for patients with hypertrophic scars and keloids. PMID:25396172

Scar Prevention and Enhanced Wound Healing Induced by Polydeoxyribonucleotide in a Rat Incisional Wound-Healing Model.

PubMed

Jeong, Woonhyeok; Yang, Chae Eun; Roh, Tai Suk; Kim, Jun Hyung; Lee, Ju Hee; Lee, Won Jai

2017-08-03

High-mobility group box protein-1 (HMGB-1) plays a central role in the inflammatory network, and uncontrolled chronic inflammation can lead to excessive scarring. The aim of this study was to evaluate the anti-inflammatory effects of polydeoxyribonucleotide (PDRN) on scar formation. Sprague-Dawley rats (n = 30) underwent dorsal excision of the skin, followed by skin repair. PDRN (8 mg/kg) was administered via intraperitoneal injection for three (PDRN-3 group, n = 8) or seven (PDRN-7 group, n = 8) days, and HMGB-1 was administered via intradermal injection in addition to PDRN treatment for three days (PDRN-3+HMGB-1 group; n = 6). The scar-reducing effects of PDRN were evaluated in the internal scar area and by inflammatory cell counts using histology and immunohistochemistry. Western blot, immunohistochemistry and immunofluorescence assays were performed to observe changes in type I and type III collagen and the expression of HMGB-1 and CD45. Treatment with PDRN significantly reduced the scar area, inflammatory cell infiltration and the number of CD45-positive cells. In addition, the increased expression of HMGB-1 observed in the sham group was significantly reduced after treatment with PDRN. Rats administered HMGB-1 in addition to PDRN exhibited scar areas with inflammatory cell infiltration similar to the sham group, and the collagen synthesis effects of PDRN were reversed. In summary, PDRN exerts anti-inflammatory and collagen synthesis effects via HMGB-1 suppression, preventing scar formation. Thus, we believe that the anti-inflammatory and collagen synthesis effects of PDRN resulted in faster wound healing and decreased scar formation.

The application of color Doppler flow imaging in the diagnosis and therapeutic effect evaluation of erectile dysfunction

PubMed Central

Xuan, Xu-Jun; Bai, Gang; Zhang, Cai-Xia; Xu, Chao; Lu, Fu-Ding; Peng, Yang; Ma, Gang; Han, Cong-Hui; Chen, Jun

2016-01-01

We aim to investigate the correlations between hemodynamic parameters, penile rigidity grading, and the therapeutic effects of phosphodiesterase type 5 inhibitors using color Doppler flow imaging after intracavernosal injection in patients with erectile dysfunction. This study involved 164 patients. After intracavernosal injection with a mixture of papaverine (60 mg), prostaglandin E1 (10 μg), and lidocaine (2%, 0.5–1 ml), the penile vessels were assessed using color Doppler flow imaging. Penile rigidity was classified based on the Erection Hardness Score system as Grades 4, 3, 2 or 1 (corresponding to Schramek Grades V to II). Then, the patients were given oral sildenafil (50–100 mg) and scored according to the International Index of Erectile Function (IIEF-5) questionnaire. The number of patients with penile rigidities of Schramek Grades II to V was 14, 18, 21, and 111, respectively. The IIEF-5 score was positively correlated with the refilling index of the penile cavernosal artery (r = 0.79, P < 0.05), the peak systolic velocity (r = 0.45, P < 0.05), and penile rigidity (r = 0.75, P < 0.05), and was negatively correlated with the end diastolic velocity (r = −0.74, P < 0.05). For patients with erectile dysfunction, both the IIEF-5 score after sildenafil administration, which is correlated with penile rigidity, and the hemodynamic parameters detected using color Doppler flow imaging may predict the effects of phosphodiesterase type 5 inhibitor treatment and could provide a reasonable model for the targeted-treatment of erectile dysfunction. PMID:25994651

Negative ion source with hollow cathode discharge plasma

DOEpatents

Hershcovitch, A.; Prelec, K.

1980-12-12

A negative ion source of the type where negative ions are formed by bombarding a low-work-function surface with positive ions and neutral particles from a plasma, wherein a highly ionized plasma is injected into an anode space containing the low-work-function surface is described. The plasma is formed by hollow cathode discharge and injected into the anode space along the magnetic field lines. Preferably, the negative ion source is of the magnetron type.

A theoretical analysis of the electromagnetic environment of the AS330 super Puma helicopter external and internal coupling

NASA Technical Reports Server (NTRS)

Flourens, F.; Morel, T.; Gauthier, D.; Serafin, D.

1991-01-01

Numerical techniques such as Finite Difference Time Domain (FDTD) computer programs, which were first developed to analyze the external electromagnetic environment of an aircraft during a wave illumination, a lightning event, or any kind of current injection, are now very powerful investigative tools. The program called GORFF-VE, was extended to compute the inner electromagnetic fields that are generated by the penetration of the outer fields through large apertures made in the all metallic body. Then, the internal fields can drive the electrical response of a cable network. The coupling between the inside and the outside of the helicopter is implemented using Huygen's principle. Moreover, the spectacular increase of computer resources, as calculations speed and memory capacity, allows the modellization structures as complex as these of helicopters with accuracy. This numerical model was exploited, first, to analyze the electromagnetic environment of an in-flight helicopter for several injection configurations, and second, to design a coaxial return path to simulate the lightning aircraft interaction with a strong current injection. The E field and current mappings are the result of these calculations.

Effectiveness of 20% benzocaine as a topical anesthetic for intraoral injections.

PubMed Central

Nusstein, John M.; Beck, Mike

2003-01-01

The use of topical anesthetics has been advocated prior to the administration of various types of anesthetic injections. Reported results have varied between studies. The purpose of this study was to compare the effectiveness of 20% benzocaine in reducing the pain of needle insertion during maxillary posterior and anterior infiltration and inferior alveolar nerve block injections. In this retrospective study, 1080 patients received 2336 injections using a 27-gauge needle. Topical anesthetic was applied prior to 720 of the injections. Patients rated pain of needle insertion using a 0-4 pain scale. Logistic regression analysis showed no differences in pain ratings between topical and no topical groups for the inferior alveolar nerve block and posterior maxillary infiltration injections. The use of topical anesthetic did reduce the pain of needle insertion with the maxillary anterior injections (P = .0041). PMID:14959903

Seismicity rate surge on faults after shut-in: poroelastic response to fluid injection

NASA Astrophysics Data System (ADS)

Chang, K. W.; Yoon, H.; Martinez, M. J.

2017-12-01

Subsurface energy activities such as geological CO2 storage and wastewater injection require injecting large amounts of fluid into the subsurface, which will alter the states of pore pressure and stress in the storage formation. One of the main issues for injection-induced seismicity is the post shut-in increases in the seismicity rate, often observed in the fluid-injection operation sites. The rate surge can be driven by the following mechanisms: (1) pore-pressure propagation into distant faults after shut-in and (2) poroelastic stressing caused by well operations, depending on fault geometry, hydraulic and mechanical properties of the formation, and injection history. We simulate the aerial view of the target reservoir intersected by strike-slip faults, in which injection-induced pressure buildup encounters the faults directly. We examine the poroelastic response of the faults to fluid injection and perform a series of sensitivity tests considering: (1) permeability of the fault zone, (2) locations and the number of faults with respect to the injection point, and (3) well operations with varying the injection rate. Our analysis of the Coulomb stress change suggests that the sealing fault confines pressure diffusion which stabilizes or weakens the nearby conductive fault depending on the injection location. We perform the sensitivity test by changing injection scenarios (time-dependent rates), while keeping the total amount of injected fluids. Sensitivity analysis shows that gradual reduction of the injection rate minimizes the Coulomb stress change and the least seismicity rates are predicted. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, LLC., a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA-0003525.

Overview of the International Space Station System Level Trace Contaminant Injection Test

NASA Technical Reports Server (NTRS)

Tatara, James D.; Perry, Jay L.; Franks, Gerald D.

1997-01-01

Trace contaminant control onboard the International Space Station will be accomplished not only by the Trace Contaminant Control Subassembly but also by other Environmental Control and Life Support System subassemblies. These additional removal routes include absorption by humidity condensate in the Temperature and Humidity Control Condensing Heat Exchanger and adsorption by the Carbon Dioxide Removal Assembly. The Trace Contaminant Injection Test, which was performed at NASA's Marshall Space Flight Center, investigated the system-level removal of trace contaminants by the International Space Station Atmosphere Revitalization, and Temperature/Humidity Control Subsystems, (November-December 1997). It is a follow-on to the Integrated Atmosphere Revitalization Test conducted in 1996. An estimate for the magnitude of the assisting role provided by the Carbon Dioxide Removal Assembly and the Temperature and Humidity Control unit was obtained. In addition, data on the purity of Carbon Dioxide Removal Assembly carbon dioxide product were obtained to support Environmental Control and Life Support System Air Revitalization Subsystem loop closure.

Risk of Osteoporotic Fracture After Steroid Injections in Patients With Medicare.

PubMed

Carreon, Leah Y; Ong, Kevin L; Lau, Edmund; Kurtz, Steven M; Glassman, Steven D

To further evaluate the relationship between steroid injections and osteoporotic fracture risk, we analyzed Medicare administrative claims data on both large-joint steroid injections (LJSIs) into knee and hip and transforaminal steroid injections (TSIs), as well as osteoporotic hip and wrist fractures. Our hypothesis was that a systemic effect of steroid injections would increase fracture risk in all skeletal locations regardless of injection site, whereas a local effect would produce a disproportionate increased risk of spine fracture with spine injection. Patients treated with an LJSI, a TSI, or an epidural steroid injection (ESI) were identified from 5% Medicare claims data. Patients under age 65 years and patients with prior osteoporotic fracture were excluded. Analyses were performed to determine fracture risk (adjusted hazard ratio) for each type of injection. Analysis of the Medicare data revealed that ESIs were associated with decreased osteoporotic spine fracture risk, but the effect was small and might not be clinically relevant. ESIs did not influence osteoporotic hip or wrist fracture risk, but LJSIs reduced the risk.

Comparison of posterior internal anal sphincter myectomy and intrasphincteric botulinum toxin injection for treatment of internal anal sphincter achalasia: a meta-analysis.

PubMed

Friedmacher, Florian; Puri, Prem

2012-08-01

Internal anal sphincter (IAS) achalasia is a clinical condition with presentation similar to Hirschsprung's disease, but with the presence of ganglion cells on rectal suction biopsy (RSB). The diagnosis is made by anorectal manometry (ARM), which demonstrates the absence of the rectosphincteric reflex on rectal balloon inflation. The recommended treatment of choice is posterior IAS myectomy. Recently, intrasphincteric botulinum toxin (Botox) injection has been effectively used for treatment of IAS achalasia. The aim of this meta-analysis was to compare the efficacy of posterior IAS myectomy with intrasphincteric Botox injection for treatment of IAS achalasia. A systematic literature search for relevant articles was conducted using the following databases: MEDLINE( ® ), EMBASE(®), ISI Web of Science(SM) and the Cochrane Library. A meta-analysis was performed with the studies where IAS achalasia was diagnosed based on the results of ARM and RSB. Odds ratio (OR) with 95 % confidence intervals were calculated. Sixteen prospective and retrospective studies, published from 1973 to 2009, were identified. A total of 395 patients with IAS achalasia were included in this meta-analysis. Fifty-eight percent of patients underwent IAS myectomy and 42 % Botox injection. Regular bowel movements were significantly more frequent after IAS myectomy (OR 0.53, [95 % CI 0.29-0.99]; p = 0.04). There was no significant difference in continued use of laxatives or rectal enemas (OR 0.92, [95 % CI 0.34-2.53], p = 0.89) and in overall complication rates between both procedures (OR 0.68, [95 % CI 0.38-1.21]; p = 0.19). Looking at specific complications, the rate of transient faecal incontinence was significantly higher after Botox injection (OR 0.07, [95 % CI 0.01-0.54]; p < 0.01). Constipation and soiling were not significantly different between both procedures (OR 0.66, [95 % CI 0.30-1.48]; p = 0.31 and OR 0.24, [95 % CI 0.03-2.07]; p = 0.25). The rate of non-response was significantly higher after Botox injection (OR 0.52, [95 % CI 0.27-0.99]; p = 0.04). Subsequent surgical treatment was significantly more frequent after Botox injection (OR 0.18, [95 % CI 0.07-0.44]; p < 0.0001). Short- and long-term improvements were significantly more frequent after IAS myectomy (OR 0.56, [95 % CI 0.32-0.97]; p = 0.04 and OR 0.25, [95 % CI 0.15-0.41]; p < 0.0001). This meta-analysis indicates that in patients with IAS achalasia, posterior IAS myectomy appears to be a more effective treatment option compared to intrasphincteric Botox injection. After Botox injection, the rate of transient faecal incontinence, non-response and subsequent surgical procedures were significantly higher compared to IAS myectomy.

Side effects and potential risk factors of botulinum toxin type A intramuscular injections in knee flexion contractures of hemophiliacs.

PubMed

Rodriguez-Merchan, E Carlos; De la Corte-Rodriguez, Hortensia

2017-07-01

Knee flexion contracture (KFC) is a common complication of recurrent hemarthrosis in children and young adults with hemophilia. If the KFC is not prevented (by means of primary prophylaxis) and treated properly and early (be means of physical medicine and rehabilitation), it will become fixed. Areas covered: The aim of this article is to review the potential role of botulinum toxin type A (BTX-A) intramuscular injections for the treatment of KFC in people with hemophilia (PWH). Expert commentary: Although two recent reports have mentioned the benefits of intramuscular injections of BTX-A in PWH with KFC, the data are still scant and too preliminary. The use of intramuscular injections of BTX-A in PWH today should not be recommended until more case studies/small series (ideally well-designed clinical trials) fully demonstrate that this is safe and effective. The risks of intramuscular injections to a hemophilia patient cannot be underestimated (iatrogenic muscle hematomas and pseudotumors). This paper calls the attention of hemophilia treaters on the potential risks of this apparently interesting technique. The current use of BTX-A intramuscular injections in KFC of PWH could make no sense. Raising false expectations in these patients should be avoided.

Hole injection and dielectric breakdown in 6H-SiC and 4H-SiC metal-oxide-semiconductor structures during substrate electron injection via Fowler-Nordheim tunneling

NASA Astrophysics Data System (ADS)

Samanta, Piyas; Mandal, Krishna C.

2015-12-01

Hole injection into silicon dioxide (SiO2) films (8-40 nm thick) is investigated for the first time during substrate electron injection via Fowler-Nordheim (FN) tunneling in n-type 4H- and 6H-SiC (silicon carbide) based metal-oxide-semiconductor (MOS) structures at a wide range of temperatures (T) between 298 and 598 K and oxide electric fields Eox from 6 to 10 MV/cm. Holes are generated in heavily doped n-type polycrystalline silicon (n+ -polySi) gate serving as the anode as well as in the bulk silicon dioxide (SiO2) film via hot-electron initiated band-to-band ionization (BTBI). In absence of oxide trapped charges, it is shown that at a given temperature, the hole injection rates from either of the above two mechanisms are higher in n-4H-SiC MOS devices than those in n-6H-SiC MOS structures when compared at a given Eox and SiO2 thickness (tox). On the other hand, relative to n-4H-SiC devices, n-6H-SiC structures exhibit higher hole injection rates for a given tox during substrate electron injection at a given FN current density je,FN throughout the temperature range studied here. These two observations clearly reveal that the substrate material (n-6H-SiC and n-4H-SiC) dependencies on time-to-breakdown (tBD) or injected charge (electron) to breakdown (QBD) of the SiO2 film depend on the mode of FN injections (constant field/voltage and current) from the substrate which is further verified from the rigorous device simulation as well.

[Guidelines for practical usage of botulinum toxin type A (BoNTA) for refractory idiopathic overactive bladder management].

PubMed

Hermieu, J-F; Ballanger, P; Amarenco, G; Chartier-Kastler, E; Cosson, M; Costa, P; Fatton, B; Deffieux, X; Denys, P; Gamé, X; Haab, F; Karsenty, G; Le Normand, L; Ruffion, A; Saussine, C

2013-12-01

Provide guidelines for practical usage of botulinum toxin type A (BoNTA) for refractory idiopathic Overactive Bladder management. Guidelines using formalized consensus guidelines method. These guidelines have been validated by a group of 13 experts quoting proposals, subsequently reviewed by an independent group of experts. In the case of patients with urinary tract infection, it must be treated and injection postponed. Before proposing an injection, it is recommended to ensure the feasibility and acceptability of self-catheterisation by patient. The injection can be performed after local anesthesia of the bladder and urethra (lidocaine), supplemented where necessary by nitrous oxide inhalation and sometimes under general anesthesia. Injection is performed in the operating room or endoscopy suite. The bladder should not be too filled (increased risk of perforation). Treatment should be applied in 10 to 20 injections of 0.5 to 1mL homogeneously distributed in the bladder at a distance from the urethral orifices. It is not recommended to leave a urinary catheter in place except in cases of severe hematuria. The patient should be monitored until resumption of micturition. After the first injection, an appointment must be scheduled within 3 months (micturition diary, uroflowmetry, measurement of residual urine and urine culture). Performance of self-catheterisation should be questioned in the case of a symptomatic post-void residual and/or a residue>200mL. A new injection may be considered when the clinical benefit of the previous injection diminishes (between 6 and 9 months). A period of three months must elapse between each injection. Implementation of these guidelines may promote best practice usage of BoNTA with optimal risk/benefit ratio. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

Guidelines for practical usage of botulinum toxin type A (BoNTA) for refractory idiopathic overactive bladder management: Translation of French recommendations.

PubMed

Hermieu, J-F; Ballanger, P; Amarenco, G; Chartier-Kastler, É; Cosson, M; Costa, P; Fatton, B; Saussine, C; Denys, P; Gamé, X; Haab, F; Karsenty, G; Le Normand, L; Ruffion, A; Deffieux, X

2014-09-01

Provide guidelines for practical usage of botulinum toxin type A (BoNTA) for refractory idiopathic overactive bladder management. Guidelines using formalized consensus guidelines method. These guidelines have been validated by a group of 13 experts quoting proposals, subsequently reviewed by an independent group of experts. In the case of patients with urinary tract infection, it must be treated and injection postponed. Before proposing an injection, it is recommended to ensure the feasibility and acceptability of self-catheterisation by patient. The injection can be performed after local anesthesia of the bladder and urethra (lidocaine), supplemented where necessary by nitrous oxide inhalation and sometimes under general anesthesia. Injection is performed in the operating room or endoscopy suite. The bladder should not be too filled (increased risk of perforation). Treatment should be applied in 10 to 20 injections of 0.5 to 1 mL homogeneously distributed in the bladder at a distance from the urethral orifices. It is not recommended to leave a urinary catheter in place except in cases of severe hematuria. The patient should be monitored until resumption of micturition. After the first injection, an appointment must be scheduled within 3 months (micturition diary, uroflowmetry, measurement of residual urine and urine culture). Performance of self-catheterisation should be questioned in the case of a symptomatic post-void residual and/or a residue>200 mL. A new injection may be considered when the clinical benefit of the previous injection diminishes (between 6 and 9 months). A period of three months must elapse between each injection. Implementation of these guidelines may promote best practice usage of BoNTA with optimal risk/benefit ratio. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

Surgical versus injection treatment for injection-confirmed chronic sacroiliac joint pain

PubMed Central

Spiker, William Ryan; Lawrence, Brandon D.; Raich, Annie L.; Skelly, Andrea C.; Brodke, Darrel S.

2012-01-01

Study design: Systematic review. Study rationale: Chronic sacroiliac joint pain (CSJP) is a common clinical entity with highly controversial treatment options. A recent systematic review compared surgery with denervation, but the current systematic review compares outcomes of surgical intervention with therapeutic injection for the treatment of CSJP and serves as the next step for evaluating current evidence on the comparative effectiveness of treatments for non-traumatic sacroiliac joint pain. Objective or clinical question: In adult patients with injection-confirmed CSJP, does surgical treatment lead to better outcomes and fewer complications than injection therapy? Methods: A systematic review of the English-language literature was undertaken for articles published between 1970 and June 2012. Electronic databases and reference lists of key articles were searched to identify studies evaluating surgery or injection treatment for injection-confirmed CSJP. Studies involving traumatic onset or non-injection–confirmed CSJP were excluded. Two independent reviewers assessed the level of evidence quality using the grading of recommendations assessment, development and evaluation (GRADE) system, and disagreements were resolved by consensus. Results: We identified twelve articles (seven surgical and five injection treatment) meeting our inclusion criteria. Regardless of the type of treatment, most studies reported over 40% improvement in pain as measured by Visual Analog Scale or Numeric rating Scale score. Regardless of the type of treatment, most studies reported over 20% improvement in functionality. Most complications were reported in the surgical studies. Conclusion: Surgical fusion and therapeutic injections can likely provide pain relief, improve quality of life, and improve work status. The comparative effectiveness of these interventions cannot be evaluated with the current literature. PMID:23526911

Selective TNF-α inhibitor-induced injection site reactions.

PubMed

Murdaca, Giuseppe; Spanò, Francesca; Puppo, Francesco

2013-03-01

During the last decade, many new biological immune modulators entered the market as new therapeutic principles. TNF-α is a pro-inflammatory cytokine known to a have a key role in the pathogenic mechanisms of various immune-mediated or inflammatory diseases. TNF-α blockers have demonstrated efficacy in large, randomized controlled clinical trials either as monotherapy or in combination with other anti-inflammatory or disease-modifying anti-rheumatic drugs. Although generally well tolerated and safe, potential adverse events may be associated with TNF-α inhibitor treatment. The authors will briefly review the potential adverse drug reactions and the immunological mechanisms of injection site reactions (ISRs) in patients treated with etanercept and adalimumab. Patients treated with TNF-α inhibitors can develop ISR around the sites of injections. 'Type IV delayed type reaction' or 'recall ISRs'. Eosinophilic cellulitis or 'Wells syndrome', 'type III' and 'type I' reactions are reported. Long-term studies are necessary to determine the durability of response and the real risk of ISRs with golimumab and certolizumab pegol. Further studies are also necessary to evaluate the immunogenicity of these drugs.

Serotonin (5-HT)2A/2C receptor agonist (2,5-dimethoxy-4-idophenyl)-2-aminopropane hydrochloride (DOI) improves voiding efficiency in the diabetic rat.

PubMed

Tu, Hongjian; Cao, Nailong; Gu, Baojun; Si, Jiemin; Chen, Zhong; Andersson, Karl-Erik

2015-07-01

To examine the effects of the serotonin (5-HT)2A/2C receptor agonist (2,5-dimethoxy-4-idophenyl)-2-aminopropane hydrochloride (DOI) on micturition in rats with diabetes mellitus (DM). Female Sprague-Dawley rats (n = 16) were divided into two groups: rats with Type 1 DM and age-matched control rats. DM was induced by i.p. injection of streptozotocin (65 mg/kg) and detailed cystometrogram (CMG) studies were performed 8 weeks post-injection in all rats under urethane anaesthesia. The selective 5-HT2A antagonist ketanserin was administered after each DOI dose-response curve was plotted. All drugs were administered i.v. Compared with controls, comprehensive urodynamic studies showed that DM rats had a higher bladder capacity and post-void residual urine volume (PVR), and a markedly lower voiding efficiency. In DM rats, DOI (0.01-0.3 mg/kg) induced significant dose-dependent increases in micturition volume and reductions in PVR, resulting in greater voiding efficiency. CMG measurements showed a dose-dependent increase in high-frequency oscillation (HFO) activity, evidenced by an increased duration of HFOs per voiding. This correlated with the improved voiding efficiency. Ketanserin (0.1 mg/kg) partially or completely reversed the DOI-induced changes. The HFOs observed in the present study seem to correlate with external urethral sphincter bursting activity during voiding. Bladder voiding efficiency was reduced in DM rats. The 5-HT2A receptor agonist can enhance HFO activity and improves voiding efficiency, and so may represent a new strategy to improve voiding efficiency after DM in experimental studies. © 2014 The Authors BJU International © 2014 BJU International Published by John Wiley & Sons Ltd.

Botulinum toxin type a injections to salivary glands: combination with single event multilevel chemoneurolysis in 2 children with severe spastic quadriplegic cerebral palsy.

PubMed

Kim, Heakyung; Lee, Yung; Weiner, Daniel; Kaye, Robin; Cahill, Anne Marie; Yudkoff, Marc

2006-01-01

We describe 2 children with severe spastic quadriplegic cerebral palsy (CP) who have significant drooling and frequent aspiration pneumonia. They underwent simultaneous botulinum toxin type A (BTX-A) injections to salivary glands for drooling and prevention of aspiration pneumonia along with single-event multilevel chemoneurolysis (SEMLC) with BTX-A and 5% phenol for severe diffuse spasticity. There was significant improvement in drooling, frequency of aspiration pneumonia, and spasticity without adverse effect. BTX-A injections into the salivary glands, in addition to SEMLC, for these 2 children with medically complicated severe spastic quadriplegic CP, were safe and highly successful procedures, which improved their health-related quality of life.

Injection therapy for subacute and chronic low back pain: an updated Cochrane review.

PubMed

Staal, J Bart; de Bie, Rob A; de Vet, Henrica C W; Hildebrandt, Jan; Nelemans, Patty

2009-01-01

A systematic review of randomized controlled trials (RCTs). To determine if injection therapy is more effective than placebo or other treatments for patients with subacute or chronic low back pain. The effectiveness of injection therapy for low back pain is still debatable. Heterogeneity of target tissue, pharmacological agent, and dosage, generally found in RCTs, point to the need for clinically valid comparisons in a literature synthesis. We updated the search of the earlier systematic review and searched the Cochrane Central Register of Controlled Trials, MEDLINE, and EMBASE databases up to March 2007 for relevant trials reported in English, French, German, Dutch, and Nordic languages. We also screened references from trials identified. RCTs on the effects of injection therapy involving epidural, facet, or local sites for subacute or chronic low back pain were included. Studies that compared the effects of intradiscal injections, prolotherapy, or ozone therapy with other treatments were excluded unless injection therapy with another pharmaceutical agent (no placebo treatment) was part of one of the treatment arms. Studies about injections in sacroiliac joints and studies evaluating the effects of epidural steroids for radicular pain were also excluded. Eighteen trials (1179 participants) were included in this review. The injection sites varied from epidural sites and facet joints (i.e. intra-articular injections, peri-articular injections and nerve blocks) to local sites (i.e. tender-and trigger points). The drugs that were studied consisted of corticosteroids, local anesthetics, and a variety of other drugs. The methodologic quality of the trials was limited with 10 of 18 trials rated as having a high methodologic quality. Statistical pooling was not possible because of clinical heterogeneity in the trials. Overall, the results indicated that there is no strong evidence for or against the use of any type of injection therapy. There is insufficient evidence to support the use of injection therapy in subacute and chronic low-back pain. However, it cannot be ruled out that specific subgroups of patients may respond to a specific type of injection therapy.

Meteoritic and other constraints on the internal structure and impact history of small asteroids

NASA Astrophysics Data System (ADS)

Scott, Edward R. D.; Wilson, Lionel

2005-03-01

Studies of the internal structure of asteroids, which are crucial for understanding their impact history and for hazard mitigation, appear to be in conflict for the S-type asteroids, Eros, Gaspra, and Ida. Spacecraft images and geophysical data show that they are fractured, coherent bodies, whereas models of catastrophic asteroidal impacts, family and satellite formation, and studies of asteroid spin rates, and other diverse properties of asteroids and planetary craters suggest that such asteroids are gravitationally bound aggregates of rubble. These conflicting views may be reconciled if 10-50 km S-type asteroids formed as rubble piles, but were later consolidated into coherent bodies. Many meteorites are breccias that testify to a long history of impact fragmentation and consolidation by alteration, metamorphism, igneous and impact processes. Ordinary chondrites, which are the best analogs for S asteroids, are commonly breccias. Some may have formed in cratering events, but many appear to have formed during disruption and reaccretion of their parent asteroids. Some breccias were lithified during metamorphism, and a few were lithified by injected impact melt, but most are regolith and fragmental breccias that were lithified by mild or moderate shock, like their lunar analogs. Shock experiments show that porous chondritic powders can be consolidated during mild shock by small amounts of silicate melt that glues grains together, and by friction and pressure welding of silicate and metallic Fe,Ni grains. We suggest that the same processes that converted impact debris into meteorite breccias also consolidated asteroidal rubble. Internal voids would be partly filled with regolith by impact-induced seismic shaking. Consolidation of this material beneath large craters would lithify asteroidal rubble to form a more coherent body. Fractures on Ida that were created by antipodal impacts and are concentrated in and near large craters, and small positive gravity anomalies associated with the Psyche and Himeros craters on Eros, are consistent with this concept. Spin data suggest that smaller asteroids 0.6-6 km in size are unconsolidated rubble piles. C-type asteroids, which are more porous than S-types, and their analogs, the volatile-rich carbonaceous chondrites, were probably not lithified by shock.

Paracrine GABA and insulin regulate pancreatic alpha cell proliferation in a mouse model of type 1 diabetes.

PubMed

Feng, Allen L; Xiang, Yun-Yan; Gui, Le; Kaltsidis, Gesthika; Feng, Qingping; Lu, Wei-Yang

2017-06-01

This study aimed to elucidate the mechanism of increased proliferation of alpha cells in recent-onset type 1 diabetes. Pancreatic beta cells express GAD and produce γ-aminobutyric acid (GABA), which inhibits alpha cell secretion of glucagon. We explored the roles of GABA in alpha cell proliferation in conditions corresponding to type 1 diabetes in a mouse model and in vitro. Type 1 diabetes was induced by injecting the mice with streptozotocin (STZ). Some of the STZ-injected mice were treated with GABA (10 mg/kg daily) for 12 days. Isolated pancreatic islets were treated with STZ or STZ together with GABA for 2 days. The effects of GABA treatment on STZ-induced alpha cell proliferation in vivo and in vitro were assessed. The effect of muscimol, a GABA receptor agonist, on αTC1-6 cell proliferation was also examined. STZ injection substantially decreased levels of GAD, GABA and insulin in pancreatic beta cells 12 h after injection; this was followed by an upsurge of phosphorylated mechanistic target of rapamycin (p-mTOR) in the alpha cells at day 1, and a significant increase in alpha cell mass at day 3. Treating STZ-injected mice with GABA largely restored the immunodetectable levels of insulin and GAD in the beta cells and significantly decreased the number of aldehyde dehydrogenase 1 family, member A3 (ALDH1a3)-positive cells, alpha cell mass and hyperglucagonaemia. STZ treatment also increased alpha cell proliferation in isolated islets, which was reversed by co-treatment with GABA. Muscimol, together with insulin, significantly lowered the level of cytosolic Ca 2+ and p-mTOR, and decreased the proliferation rate of αTC1-6 cells. GABA signalling critically controls the alpha cell population in pancreatic islets. Low intraislet GABA may contribute to alpha cell hyperplasia in early type 1 diabetes.

Effects of differential supplementation of fatty acids during the peripartum and breeding periods of Holstein cows: I. Uterine and metabolic responses, reproduction, and lactation.

PubMed

Silvestre, F T; Carvalho, T S M; Francisco, N; Santos, J E P; Staples, C R; Jenkins, T C; Thatcher, W W

2011-01-01

The objectives were to evaluate the effects of differential timing of supplementation of different Ca salts (CS) of fatty acids (FA) on FA profiles of cotyledonary-caruncular tissues, metabolic status, uterine health, pregnancy, pregnancy losses after 2 artificial inseminations (AI), and milk yield. Holstein cows (n=1,380) were assigned randomly to be fed either CS of palm oil (PO) or safflower oil (SO) from 30 d prepartum until 30 d postpartum (dpp) and further randomized to receive either CS of PO or fish oil (FO) from 30 to 160 dpp. Supplementation of CS of FA was at 1.5% of dietary dry matter. Tissues (n=23) and blood (n=32) were collected from a subsample of cows. Blood was collected daily from parturition to 10 dpp and three times weekly thereafter until 30 dpp for analyses of PGF2α metabolite, nonesterified FA, β-hydroxybutyric acid, blood urea nitrogen, and glucose. Cows were evaluated once between 8 to 10 dpp for cervical discharge type. At 43 dpp, cows received 2 injections of PGF2α 14 d apart, followed 14 d later by injections of GnRH at 7 d before and 56 h after an injection of PGF2α with AI at 16 h after the second GnRH injection. All cows received intravaginally a controlled internal drug-releasing device, containing 1.38 g of progesterone, at 18 d after the first AI followed 7 d later by removal of the device and injection of GnRH. Nonpregnant cows at 32 d after AI were injected with PGF2α, followed 56 h later with a GnRH injection and second AI 16 h thereafter. Cows diagnosed pregnant after both AI were re-examined at 60 d of pregnancy to determine pregnancy losses. Milk weights were recorded monthly for all cows. Caruncular n-6:n-3 FA ratio was greater in cows fed SO. Plasma concentrations of metabolites and frequency of cervical discharge type did not differ between PO- and SO-fed cows. Plasma PGF2α metabolite was greater in SO-fed cows at 4 and 7 dpp. Pregnancy per AI at 32 and 60 d post first AI was not affected by diets, but pregnancy loss was less in FO-fed cows. At second AI, pregnancy was greater in FO-fed cows at 32 d and in SO-FO-fed cows at 60 d post AI. Pregnancy loss after second AI was not affected by diets. Overall pregnancy per AI was greater in cows fed SO followed by FO at 60 d of pregnancy and pregnancy loss was reduced in FO-fed cows. Monthly milk yield was greater (0.7 kg/d) in SO-fed cows. In conclusion, strategic feeding of CS of FA during transition and breeding periods can benefit fertility and milk production of lactating dairy cows. Copyright © 2011 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

CHARACTERIZATION OF FRACTURED BEDROCK FOR STEAM INJECTION

EPA Science Inventory

The most difficult setting in which to conduct groundwater remediation is that where chlorinated solvents have penetrated fractured bedrock. To demonstrate the potential viability of steam injection as a means of groundwater clean-up in this type of environment, steam will be in...

Myth vs. Fact: The Human Chorionic Gonadotropin (hCG) Diet

MedlinePlus

... given by injection (using a needle), and hCG dietary supplements, taken by mouth as drops or pills. Health professionals have concerns about both types. www.hormone.org Risks of Injected hCG Women Men • irregular periods and • ...

40 CFR 1042.230 - Engine families.

Code of Federal Regulations, 2013 CFR

2013-07-01

... example, raw-water vs. separate-circuit cooling). (3) Method of air aspiration. (4) Method of exhaust... (i.e., mechanical or electronic). (9) Application (commercial or recreational). (10) Numerical level... injection pressure. (17) The type of fuel injection system controls (i.e., mechanical or electronic). (18...

EFFECTS OF BACTERIAL ENDOTOXIN ON WATER INTAKE, FOOD INTAKE, AND BODY TEMPERATURE IN THE ALBINO RAT

PubMed Central

Holmes, John E.; Miller, Neal E.

1963-01-01

Intraperitoneal injections of Escherichia coli endotoxin in albino rats produces a decrease in food and water intake and a drop in body temperature. The drop in temperature and in water intake is probably proportional to the size of the dose. Using a behavioral test in which animals are trained to press a bar at a steady rate for intermittent food or water reward, it is possible to demonstrate the sudden onset of the toxin effect at 30 to 45 minutes after injection. In any group of rats, all of whom were presumably exposed to E. coli, three types of response to toxin can be found: (a) Sharp reduction in water intake 30 minutes after injection. (b) Little or no change in intake or rate of working for water reward. (c) Immediate depression of work rate. These three types of reaction appear related to previous experience with the toxin. The "normal" or "inexperienced" reaction a was seen in animals who had not been given toxin before. The "protected" reaction b, with little or no effect of toxin injection on response rate was frequently found 4 to 5 days after a previous injection. The "susceptible" reaction c was found in three animals after 14 or more days had passed since a previous injection. Injections of toxin into the lateral hypothalamic region of four animals through implanted cannulae had no effect on the rate of bar pressing for water. Control injections of lidocaine blocked response rate completely for brief periods in three animals. PMID:14067912

Comparison of Power Versus Manual Injection in Bolus Shape and Image Quality on Contrast-Enhanced Magnetic Resonance Angiography: An Experimental Study in a Swine Model.

PubMed

Tsuboyama, Takahiro; Jost, Gregor; Pietsch, Hubertus; Tomiyama, Noriyuki

2017-09-01

The aim of this study was to compare power versus manual injection in bolus shape and image quality on contrast-enhanced magnetic resonance angiography (CE-MRA). Three types of CE-MRA (head-neck 3-dimensional [3D] MRA with a test-bolus technique, thoracic-abdominal 3D MRA with a bolus-tracking technique, and thoracic-abdominal time-resolved 4-dimensional [4D] MRA) were performed after power and manual injection of gadobutrol (0.1 mmol/kg) at 2 mL/s in 12 pigs (6 sets of power and manual injections for each type of CE-MRA). For the quantitative analysis, the signal-to-noise ratio was measured on ascending aorta, descending aorta, brachiocephalic trunk, common carotid artery, and external carotid artery on the 6 sets of head-neck 3D MRA, and on ascending aorta, descending aorta, brachiocephalic trunk, abdominal aorta, celiac trunk, and renal artery on the 6 sets of thoracic-abdominal 3D MRA. Bolus shapes were evaluated on the 6 sets each of test-bolus scans and 4D MRA. For the qualitative analysis, arterial enhancement, superimposition of nontargeted enhancement, and overall image quality were evaluated on 3D MRA. Visibility of bolus transition was assessed on 4D MRA. Intraindividual comparison between power and manual injection was made by paired t test, Wilcoxon rank sum test, and analysis of variance by ranks. Signal-to-noise ratio on 3D MRA was statistically higher with power injection than with manual injection (P < 0.001). Bolus shapes (test-bolus, 4D MRA) were represented by a characteristic standard bolus curve (sharp first-pass peak followed by a gentle recirculation peak) in all the 12 scans with power injection, but only in 1 of the 12 scans with manual injection. Standard deviations of time-to-peak enhancement were smaller in power injection than in manual injection. Qualitatively, although both injection methods achieved diagnostic quality on 3D MRA, power injection exhibited significantly higher image quality than manual injection (P = 0.001) due to significantly higher arterial enhancement (P = 0.031) and less superimposition of nontargeted enhancement (P = 0.001). Visibility of bolus transition on 4D MRA was significantly better with power injection than with manual injection (P = 0.031). Compared with manual injection, power injection provides more standardized bolus shapes and higher image quality due to higher arterial enhancement and less superimposition of nontargeted vessels.

Knockdown of orexin type 2 receptor in the lateral pontomesencephalic tegmentum of rats increases REM sleep

PubMed Central

Chen, Lichao; McKenna, James T.; Bolortuya, Yunren; Brown, Ritchie E.

2012-01-01

Dysfunction of the orexin/hypocretin neurotransmitter system causes the sleep disorder narcolepsy, characterized by intrusion of rapid-eye-movement (REM) sleep-like events into normal wakefulness. The sites where orexins act to suppress REM sleep are incompletely understood. Previous studies suggested that the lateral pontomesencephalic tegmentum (lPMT) contains an important REM sleep inhibitory area, and proposed that orexins inhibit REM sleep via orexin type 2 receptors (OxR2) in this region. However, this hypothesis has heretofore not been tested. We thus performed bilateral injection of small interfering RNAs (siRNAs) targeting Ox2R into the lPMT on two consecutive days. This led to a ~30 % increase of time spent in REM sleep in both the dark and light periods for the first two days after injection, with a return to baseline over the next two post-injection days. This increase was mainly due to more longer (>120 s) REM episodes. Cataplexy-like episodes were not observed. The percentage of time spent in wakefulness and NREM sleep, as well as the power spectral profile of NREM and REM sleep, were unaffected. Control animals injected with scrambled siRNA had no sleep changes post-injection. Quantification of the knockdown revealed that unilateral microinjection of siRNAs targeting OxR2 into the lPMT induced a ~40% reduction of OxR2 mRNA two days following the injections when compared to the contralateral side receiving control (scrambled) siRNA. Orexin type 1 receptor (OxR1) mRNA level was unaffected. Our results indicate that removal of OxR2 neurotransmission in the lPMT enhances REM sleep by increasing the duration of REM episodes. PMID:23282008

Muscle structure and stiffness assessment after botulinum toxin type A injection. A systematic review.

PubMed

Mathevon, L; Michel, F; Decavel, P; Fernandez, B; Parratte, B; Calmels, P

2015-12-01

Botulinum toxin type A manages spasticity disorders in neurological central diseases. Some studies have reported that it might induce muscle changes. We present a literature review abiding by the PRISMA statement guidelines. The purpose was to explore the structural and passive biomechanical muscle properties after botulinum toxin type A injections in healthy and spastic limb muscles, on animals and humans, as well as methods for evaluating these properties. We searched the PubMed and Cochrane Library databases using the following keywords: "Botulinum toxin" AND ("muscle structure" OR "muscle atrophy") and, "Botulinum toxin" AND "muscle elasticity". From the 228 initially identified articles, 21 articles were included. Histological analyses were performed, especially on animals. A neurogenic atrophy systematically occurred. In humans, one year after a single injection, the histological recovery remained incomplete. Furthermore, 2D ultrasound analyses showed a reduction of the gastrocnemius thickness and pennation angle. MRI volumetric analysis evidenced muscular atrophy six months or one year after a single injection. Passive muscle stiffness depends on these structural changes. On the short term, the biomechanical analysis showed an elastic modulus increase in animals whereas no change was recorded in humans. On the short term, ultrasound elastography imaging showed a decreased elastic modulus. To date, few data are available, but all show a structural and mechanical muscle impact post injections, specifically muscle atrophy which can linger over time. Further studies are necessary to validate this element, and the possibility of change must be taken into account particularly with repeated injections. Thus, in clinical practice, 2D ultrasound and ultrasound elastography are two non-invasive techniques that will help physicians to develop an efficient long term monitoring. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Combustion engine. [for air pollution control

NASA Technical Reports Server (NTRS)

Houseman, J. (Inventor)

1977-01-01

An arrangement for an internal combustion engine is provided in which one or more of the cylinders of the engine are used for generating hydrogen rich gases from hydrocarbon fuels, which gases are then mixed with air and injected into the remaining cylinders to be used as fuel. When heavy load conditions are encountered, hydrocarbon fuel may be mixed with the hydrogen rich gases and air and the mixture is then injected into the remaining cylinders as fuel.

Pain referral and regional deep tissue hyperalgesia in experimental human hip pain models.

PubMed

Izumi, Masashi; Petersen, Kristian Kjær; Arendt-Nielsen, Lars; Graven-Nielsen, Thomas

2014-04-01

Hip disorder patients typically present with extensive pain referral and hyperalgesia. To better understand underlying mechanisms, an experimental hip pain model was established in which pain referrals and hyperalgesia could be studied under standardized conditions. In 16 healthy subjects, pain was induced by hypertonic saline injection into the gluteus medius tendon (GMT), adductor longus tendon (ALT), or gluteus medius muscle (GMM). Isotonic saline was injected contralaterally as control. Pain intensity was assessed on a visual analogue scale (VAS), and subjects mapped the pain distribution. Before, during, and after injections, passive hip joint pain provocation tests were completed, together with quantitative sensory testing as follows: pressure pain thresholds (PPTs), cuff algometry pain thresholds (cuff PPTs), cutaneous pin-prick sensitivity, and thermal pain thresholds. Hypertonic saline injected into the GMT resulted in higher VAS scores than hypertonic injections into the ALT and GMM (P<.05). Referred pain areas spread to larger parts of the leg after GMT and GMM injections compared with more regionalized pain pattern after ALT injections (P<.05). PPTs at the injection site were decreased after hypertonic saline injections into GMT and GMM compared with baseline, ALT injections, and isotonic saline. Cuff PPTs from the thigh were decreased after hypertonic saline injections into the ALT compared with baseline, GMT injections, and isotonic saline (P<.05). More subjects had positive joint pain provocation tests after hypertonic compared with isotonic saline injections (P<.05), indicating that this provocation test also assessed hyperalgesia in extra-articular soft tissues. The experimental models may open for better understanding of pain mechanisms associated with painful hip disorders. Copyright © 2014 International Association for the Study of Pain. Published by Elsevier B.V. All rights reserved.

The Effect of Total Cumulative Dose, Number of Treatment Cycles, Interval between Injections, and Length of Treatment on the Frequency of Occurrence of Antibodies to Botulinum Toxin Type A in the Treatment of Muscle Spasticity

ERIC Educational Resources Information Center

Bakheit, Abdel Magid O.; Liptrot, Anthea; Newton, Rachel; Pickett, Andrew M.

2012-01-01

A large cumulative dose of botulinum toxin type A (BoNT-A), frequent injections, a short interval between treatment cycles, and a long duration of treatment have all been suggested, but not confirmed, to be associated with a high incidence of neutralizing antibodies to the neurotoxin. The aim of this study was to investigate whether these…

Liquid sprays and flow studies in the direct-injection diesel engine under motored conditions

NASA Technical Reports Server (NTRS)

Nguyen, Hung Lee; Carpenter, Mark H.; Ramos, Juan I.; Schock, Harold J.; Stegeman, James D.

1988-01-01

A two dimensional, implicit finite difference method of the control volume variety, a two equation model of turbulence, and a discrete droplet model were used to study the flow field, turbulence levels, fuel penetration, vaporization, and mixing in diesel engine environments. The model was also used to study the effects of engine speed, injection angle, spray cone angle, droplet distribution, and intake swirl angle on the flow field, spray penetration and vaporization, and turbulence in motored two-stroke diesel engines. It is shown that there are optimum conditions for injection, which depend on droplet distribution, swirl, spray cone angle, and injection angle. The optimum conditions result in good spray penetration and vaporization and in good fuel mixing. The calculation presented clearly indicates that internal combustion engine models can be used to assess, at least qualitatively, the effects of injection characteristics and engine operating conditions on the flow field and on the spray penetration and vaporization in diesel engines.

String flash-boiling in gasoline direct injection simulations with transient needle motion

DOE PAGES

Baldwin, Eli T.; Grover, Jr., Ronald O.; Parrish, Scott E.; ...

2016-09-06

A computational study was performed to investigate the influence of transient needle motion on gasoline direct injection (GDI) internal nozzle flow and near-field sprays. Simulations were conducted with a compressible Eulerian flow solver modeling liquid, vapor, and non-condensable gas phases with a diffuse interface. Variable rate generation and condensation of fuel vapor were captured using the homogeneous relaxation model (HRM). The non-flashing (spray G) and flashing (spray G2) conditions specified by the Engine Combustion Network were modeled using the nominal spray G nozzle geometry and transient needle lift and wobble were based upon ensemble averaged x-ray imaging preformed at Argonnemore » National Lab. The minimum needle lift simulated was 5 μm and dynamic mesh motion was achieved with Laplacian smoothing. The results were qualitatively validated against experimental imaging and the experimental rate of injection profile was captured accurately using pressure boundary conditions and needle motion to actu- ate the injection. Needle wobble was found to have no measurable effect on the flow. Low needle lift is shown to result in vapor generation as fuel rushes past the needle. In conclusion, the internal injector flow is shown to contain many transient and interacting vortices which cause perturbations in the spray angle, fluctuations in the mass flux, and frequently result in string flash-boiling.« less

A tale of two cities: stigma and health outcomes among people with HIV who inject drugs in St. Petersburg, Russia and Kohtla-Järve, Estonia.

PubMed

Burke, Sara E; Calabrese, Sarah K; Dovidio, John F; Levina, Olga S; Uusküla, Anneli; Niccolai, Linda M; Abel-Ollo, Katri; Heimer, Robert

2015-04-01

Experiences of stigma are often associated with negative mental and physical health outcomes. The present work tested the associations between stigma and health-related outcomes among people with HIV who inject drugs in Kohtla-Järve, Estonia and St. Petersburg, Russia. These two cities share some of the highest rates of HIV outside of sub-Saharan Africa, largely driven by injection drug use, but Estonia has implemented harm reduction services more comprehensively. People who inject drugs were recruited using respondent-driven sampling; those who indicated being HIV-positive were included in the present sample (n = 381 in St. Petersburg; n = 288 in Kohtla-Järve). Participants reported their health information and completed measures of internalized HIV stigma, anticipated HIV stigma, internalized drug stigma, and anticipated drug stigma. Participants in both locations indicated similarly high levels of all four forms of stigma. However, stigma variables were more strongly associated with health outcomes in Russia than in Estonia. The St. Petersburg results were consistent with prior work linking stigma and health. Lower barriers to care in Kohtla-Järve may help explain why social stigma was not closely tied to negative health outcomes there. Implications for interventions and health policy are discussed. Copyright © 2015 Elsevier Ltd. All rights reserved.

String flash-boiling in gasoline direct injection simulations with transient needle motion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baldwin, Eli T.; Grover, Jr., Ronald O.; Parrish, Scott E.

A computational study was performed to investigate the influence of transient needle motion on gasoline direct injection (GDI) internal nozzle flow and near-field sprays. Simulations were conducted with a compressible Eulerian flow solver modeling liquid, vapor, and non-condensable gas phases with a diffuse interface. Variable rate generation and condensation of fuel vapor were captured using the homogeneous relaxation model (HRM). The non-flashing (spray G) and flashing (spray G2) conditions specified by the Engine Combustion Network were modeled using the nominal spray G nozzle geometry and transient needle lift and wobble were based upon ensemble averaged x-ray imaging preformed at Argonnemore » National Lab. The minimum needle lift simulated was 5 μm and dynamic mesh motion was achieved with Laplacian smoothing. The results were qualitatively validated against experimental imaging and the experimental rate of injection profile was captured accurately using pressure boundary conditions and needle motion to actu- ate the injection. Needle wobble was found to have no measurable effect on the flow. Low needle lift is shown to result in vapor generation as fuel rushes past the needle. In conclusion, the internal injector flow is shown to contain many transient and interacting vortices which cause perturbations in the spray angle, fluctuations in the mass flux, and frequently result in string flash-boiling.« less

The interaction of central nitrergic and GABAergic systems on food intake in neonatal layer-type chicks.

PubMed

Mokhtarpouriani, Kasra; Zendehdel, Morteza; Jonaidi, Hossein; Babapour, Vahab; Shayan, Parviz

2016-05-01

Most physiological behaviors such as food intake are controlled by the hypothalamus and its nuclei. It has been demonstrated that injection of the paraventricular nucleus of the hypothalamus with nitric oxide (NO) donors elicited changes in the concentration of some amino acids, including GABA. Also, central nitrergic and GABAergic systems are known to provide inputs to the paraventricular nucleus and are involved in food intake control. Therefore, the present study examines the probable interaction of central nitrergic and GABAergic systems on food intake in neonatal layer-type chicks. The results of this study showed that intracerebroventricular (ICV) injection of L-arginine (400 and 800 nmol), as a NO donor, significantly decreased food intake (P < 0.001), but ICV injection of Nω-Nitro-L-arginine methyl ester (L-NAME) (200 and 400 nmol), a NO synthesis inhibitor, increased food intake (P < 0.001). In addition, the orexigenic effect of gaboxadol (0.2 µg), a GABAA agonist, was significantly attenuated in ICV co-injection of L-arginine (200 nmol) and gaboxadol (0.2 µg) (P < 0.001), but it was significantly amplified in ICV co-injection of L-NAME (100 nmol) and gaboxadol (0.2 µg) (P < 0.001). On the other hand, the orexigenic effect of baclofen (0.2 µg), a GABAB agonist, did not change in ICV co-injection of L-arginine (200 nmol) or L-NAME (100 nmol) with baclofen (0.2 µg) (P > 0.05). Also, the hypophagic effect of L-arginine (800 nmol) was significantly amplified in ICV co-injection of picrotoxin (0.5 µg), a GABAA antagonist, or CGP54626 (21 ng), a GABAB antagonist, with L-arginine (800 nmol) (P < 0.001). These results probably suggest an interaction of central nitrergic and GABAergic systems on food intake in neonatal layer-type chicks and GABAA receptors play a major role in this interaction.

Laterally injected light-emitting diode and laser diode

DOEpatents

Miller, Mary A.; Crawford, Mary H.; Allerman, Andrew A.

2015-06-16

A p-type superlattice is used to laterally inject holes into an III-nitride multiple quantum well active layer, enabling efficient light extraction from the active area. Laterally-injected light-emitting diodes and laser diodes can enable brighter, more efficient devices that impact a wide range of wavelengths and applications. For UV wavelengths, applications include fluorescence-based biological sensing, epoxy curing, and water purification. For visible devices, applications include solid state lighting and projection systems.

Extract of Ginkgo Biloba Ameliorates Streptozotocin-Induced Type 1 Diabetes Mellitus and High-Fat Diet-Induced Type 2 Diabetes Mellitus in Mice.

PubMed

Rhee, Ki-Jong; Lee, Chang Gun; Kim, Sung Woo; Gim, Dong-Hyeon; Kim, Hyun-Cheol; Jung, Bae Dong

2015-01-01

Diabetes mellitus (DM) is caused by either destruction of pancreatic β-cells (type 1 DM) or unresponsiveness to insulin (type 2 DM). Conventional therapies for diabetes mellitus have been developed but still needs improvement. Many diabetic patients have complemented conventional therapy with alternative methods including oral supplementation of natural products. In this study, we assessed whether Ginkgo biloba extract (EGb) 761 could provide beneficial effects in the streptozotocin-induced type 1 DM and high-fat diet-induced type 2 DM murine model system. For the type 1 DM model, streptozotocin-induced mice were orally administered EGb 761 for 10 days prior to streptozotocin injection and then again administered EGb 761 for an additional 10 days. Streptozotocin-treated mice administered EGb 761 exhibited lower blood triglyceride levels, lower blood glucose levels and higher blood insulin levels compared to streptozotocin-treated mice. Furthermore, liver LPL and liver PPAR-α were increased whereas IL-1β and TNF-α were decreased in streptozotocin-injected mice treated with EGb 761 compared to mice injected with streptozotocin alone. For the type 2 DM model, mice were given high-fat diet for 60 days and then orally administered EGb 761 every other day for 80 days. We found that mice given a high-fat diet and EGb 761 showed decreased blood triglyceride levels, increased liver LPL, increased liver PPAR-α and decreased body weight compared to mice given high-fat diet alone. These results suggest that EGb 761 can exert protective effects in both type 1 and type 2 DM murine models.

LABORATORY MICROCOSM EXPERIMENTS OF OXIDATION PROCESSES AFTER STEAM INJECTION

EPA Science Inventory

Aggressive thermal methods such as steam injection or resistive heating are known to be effective for the recovery of many types of volatile and semivolatile compounds. It has been suggested that oxidation or other chemical reactions that occur at remediation temperatures can ai...

Injection-modulated polarity conversion by charge carrier density control via a self-assembled monolayer for all-solution-processed organic field-effect transistors

NASA Astrophysics Data System (ADS)

Roh, Jeongkyun; Lee, Taesoo; Kang, Chan-Mo; Kwak, Jeonghun; Lang, Philippe; Horowitz, Gilles; Kim, Hyeok; Lee, Changhee

2017-04-01

We demonstrated modulation of charge carrier densities in all-solution-processed organic field-effect transistors (OFETs) by modifying the injection properties with self-assembled monolayers (SAMs). The all-solution-processed OFETs based on an n-type polymer with inkjet-printed Ag electrodes were fabricated as a test platform, and the injection properties were modified by the SAMs. Two types of SAMs with different dipole direction, thiophenol (TP) and pentafluorobenzene thiol (PFBT) were employed, modifying the work function of the inkjet-printed Ag (4.9 eV) to 4.66 eV and 5.24 eV with TP and PFBT treatments, respectively. The charge carrier densities were controlled by the SAM treatment in both dominant and non-dominant carrier-channel regimes. This work demonstrates that control of the charge carrier densities can be efficiently achieved by modifying the injection property with SAM treatment; thus, this approach can achieve polarity conversion of the OFETs.

Syndemic vulnerability, sexual and injection risk behaviors, and HIV continuum of care outcomes in HIV-positive injection drug users

PubMed Central

Mizuno, Yuko; Purcell, David W.; Knowlton, Amy R.; Wilkinson, James D.; Gourevitch, Marc N.; Knight, Kelly R.

2015-01-01

Limited investigations have been conducted on syndemics and HIV continuum of care outcomes. Using baseline data from a multi-site, randomized controlled study of HIV-positive injection drug users (n=1052), we examined whether psychosocial factors co-occurred, and whether these factors were additively associated with behavioral and HIV continuum of care outcomes. Experiencing one type of psychosocial problem was significantly (p<0.05) associated with an increased odds of experiencing another type of problem. Persons with 3 or more psychosocial problems were significantly more likely to report sexual and injection risk behaviors and were less likely to be adherent to HIV medications. Persons with 4 or more problems were less likely to be virally suppressed. Reporting any problems was associated with not currently taking HIV medications. Our findings highlight the association of syndemics not only with risk behaviors, but also with outcomes related to the continuum of care for HIV-positive persons. PMID:25249392

Strategy for the Management of Macular Edema in Retinal Vein Occlusion: The European VitreoRetinal Society Macular Edema Study

PubMed Central

Adelman, Ron A.; Parnes, Aaron J.; Bopp, Silvia; Saad Othman, Ihab; Ducournau, Didier

2015-01-01

Objective. To compare the efficacy of different therapies in the treatment of macular edema associated with retinal vein occlusion (RVO). Design. This is a nonrandomized, multicenter collaborative study. Participants. 86 retina specialists from 29 countries provided clinical information, including choice of treatment and outcome, on 2,603 patients with macular edema including 738 cases of RVO. Methods. Reported data included the type and number of treatments performed, visual acuities, and other clinical and diagnostic findings. Main Outcome Measures. The mean increase in visual acuity and mean number of treatments performed. Results. 358 cases of central retinal vein occlusion (CRVO) and 380 cases of branch retinal vein occlusion (BRVO) were included in this investigation. Taking all RVO cases together, pars plana vitrectomy with internal limiting membrane (ILM) peeling alone resulted in an improvement in vision greater than other therapies. Those treated with intravitreal antivascular endothelial growth factor (anti-VEGF) injection alone showed the second greatest improvement in vision. Dexamethasone intravitreal implant alone and intravitreal triamcinolone alone both resulted in modest visual gains. Conclusions. In the treatment of macular edema in RVO, vitrectomy with ILM peeling may achieve visual improvement and may be a good option for certain cases. Anti-VEGF injection is the most effective of the nonsurgical treatments. PMID:25705695

Strategy for the management of macular edema in retinal vein occlusion: the European VitreoRetinal Society macular edema study.

PubMed

Adelman, Ron A; Parnes, Aaron J; Bopp, Silvia; Saad Othman, Ihab; Ducournau, Didier

2015-01-01

To compare the efficacy of different therapies in the treatment of macular edema associated with retinal vein occlusion (RVO). This is a nonrandomized, multicenter collaborative study. 86 retina specialists from 29 countries provided clinical information, including choice of treatment and outcome, on 2,603 patients with macular edema including 738 cases of RVO. Reported data included the type and number of treatments performed, visual acuities, and other clinical and diagnostic findings. The mean increase in visual acuity and mean number of treatments performed. 358 cases of central retinal vein occlusion (CRVO) and 380 cases of branch retinal vein occlusion (BRVO) were included in this investigation. Taking all RVO cases together, pars plana vitrectomy with internal limiting membrane (ILM) peeling alone resulted in an improvement in vision greater than other therapies. Those treated with intravitreal antivascular endothelial growth factor (anti-VEGF) injection alone showed the second greatest improvement in vision. Dexamethasone intravitreal implant alone and intravitreal triamcinolone alone both resulted in modest visual gains. In the treatment of macular edema in RVO, vitrectomy with ILM peeling may achieve visual improvement and may be a good option for certain cases. Anti-VEGF injection is the most effective of the nonsurgical treatments.

Nandrolone decanoate appears to increase bone callus formation in young adult rats after a complete femoral fracture.

PubMed

Guimarães, Ana Paula Franttini Garcia Moreno; Butezloff, Mariana Maloste; Zamarioli, Ariane; Issa, João Paulo Mardegan; Volpon, José Batista

2017-11-01

To evaluate the influence of nandrolone decanoate on fracture healing and bone quality in normal rats. Male rats were assigned to four groups (n=28/group): Control group consisting of animals without any intervention, Nandrolone decanoate (DN) group consisting of animals that received intramuscular injection of nandrolone decanoate, Fracture group consisting of animals with a fracture at the mid-diaphysis of the femur, and Fracture and nandrolone decanoate group consisting of animals with a femur fracture and treatment with nandrolone decanoate. Fractures were created at the mid-diaphysis of the right femur by a blunt trauma and internally fixed using an intramedullary steel wire. The DN was injected intramuscularly twice per week (10 mg/kg of body mass). The femurs were measured and evaluated by densitometry and mechanical resistance after animal euthanasia. The newly formed bone and collagen type I levels were quantified in the callus. The treated animals had longer femurs after 28 days. The quality of the intact bone was not significantly different between groups. The bone callus did show a larger mass in the treated rats. The administration of nandrolone decanoate did not affect the quality of the intact bone, but might have enhanced the bone callus formation.

Loss of collapsin response mediator protein 4 suppresses dopaminergic neuron death in an 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine-induced mouse model of Parkinson's disease.

PubMed

Tonouchi, Aine; Nagai, Jun; Togashi, Kentaro; Goshima, Yoshio; Ohshima, Toshio

2016-06-01

Parkinson's disease (PD) is a progressive neurodegenerative disorder that is characterized by the selective loss of dopaminergic neurons in the substantia nigra pars compacta (SNc). Several lines of evidence suggest that neurodegeneration in PD is accelerated by a vicious cycle in which apoptosis in dopaminergic neurons triggers the activation of microglia and harmful inflammatory processes that further amplify neuronal death. Recently, we demonstrated that the deletion of collapsin response mediator protein 4 (CRMP4) suppresses inflammatory responses and cell death in a mouse model of spinal cord injury, leading to improved functional recovery. We thus hypothesized that Crmp4-/- mice may have limited inflammatory responses and a decrease in the loss of SNc dopaminergic neurons in an 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP)-induced PD mouse model. We observed CRMP4 expression in neurons, astrocytes, and microglia/macrophages following the injection of 25 mg/kg MPTP. We compared the number of dopaminergic neurons and the inflammatory response in SNc between Crmp4+/+ and Crmp4-/- mice after MPTP injection. Limited loss of SNc dopaminergic neurons and decreased activations of microglia and astrocytes were observed in Crmp4-/- mice. These results suggest that CRMP4 is a novel therapeutic target in the treatment of PD patients. We demonstrated that genetic CRMP4 deletion delays a vicious cycle of inflammation and neurodegeneration in a Parkinson's disease mouse model. MPTP (1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine) injection to wild-type mice induces collapsin response mediator protein 4 (CRMP4) up-regulation in neurons, astrocytes, and microglia. CRMP4-deficient mice show reduced inflammation and suppressed dopaminergic neuronal death after MPTP injection. These findings suggest that CRMP4 deletion may be a new therapeutic strategy against Parkinson's diseases. © 2016 International Society for Neurochemistry.

Using reusable learning objects (rlos) in injection skills teaching: Evaluations from multiple user types.

PubMed

Williams, Julia; O'Connor, Mórna; Windle, Richard; Wharrad, Heather J

2015-12-01

Clinical skills are a critical component of pre-registration nurse education in the United Kingdom, yet there is widespread concern about the clinical skills displayed by newly-qualified nurses. Novel means of supporting clinical skills education are required to address this. A package of Reusable Learning Objects (RLOs) was developed to supplement pre-registration teaching on the clinical skill of administering injection medication. RLOs are electronic resources addressing a single learning objective whose interactivity facilitates learning. This article evaluates a package of five injection RLOs across three studies: (1) questionnaires administered to pre-registration nursing students at University of Nottingham (UoN) (n=46) evaluating the RLO package as a whole; (2) individual RLOs evaluated in online questionnaires by educators and students from UoN; from other national and international institutions; and healthcare professionals (n=265); (3) qualitative evaluation of the RLO package by UoN injection skills tutors (n=6). Data from all studies were assessed for (1) access to, (2) usefulness, (3) impact and (4) integration of the RLOs. Study one found that pre-registration nursing students rate the RLO package highly across all categories, particularly underscoring the value of their self-test elements. Study two found high ratings in online assessments of individual RLOs by multiple users. The global reach is particularly encouraging here. Tutors reported insufficient levels of student-RLO access, which might be explained by the timing of their student exposure. Tutors integrate RLOs into teaching and agree on their use as teaching supplements, not substitutes for face-to-face education. This evaluation encompasses the first years postpackage release. Encouraging data on evaluative categories in this early review suggest that future evaluations are warranted to track progress as the package is adopted and evaluated more widely. Copyright © 2015 Elsevier Ltd. All rights reserved.

Improved Insulin Pharmacokinetics Using a Novel Microneedle Device for Intradermal Delivery in Patients with Type 2 Diabetes

PubMed Central

Levin, Yotam; Raz, Itamar; Cahn, Avivit

2016-01-01

Abstract Background: Currently available short-acting insulin analogs have slower absorption compared with endogenous insulin occasionally resulting in immediate postprandial hyperglycemia. Intradermal (ID) injection facilitates faster drug absorption and may result in improved insulin pharmacokinetics. Methods: Seventeen patients with type 2 diabetes were included in this single-center, pilot, open-label crossover study. Patients received 0.2 U/kg Insulin aspart ID injections using a MicronJet (MJ) needle and subcutaneous (SC) injections, using a conventional needle in a crossover design. Thirteen patients were studied under fasting conditions and four before a standard meal test. The pharmacokinetic/pharmacodynamic (PK/PD) profile, as well as the safety and tolerability of injections, was compared. Results: Fourteen patients completed the study per-protocol. ID versus SC injection demonstrated significantly shorter Tmax (median 35 vs. 87.5 min [P < 0.001]), while the Cmax did not significantly differ (median 80 vs. 55 μU/mL [P = 0.085]). Median insulin area under the curve (AUC; 360 min) did not differ between the groups (9914 vs. 10,936 μU/mL/min [p = 0.077]), yet 0–60 min insulin AUC was higher with ID versus SC injection (mean ± SD 3821 ± 1429 vs. 2534 ± 737 μU/mL/min [p = 0.01]) and 4–6 h AUC was lower with ID versus SC injection (mean ± SD 2054 ± 858 vs. 2929 ± 1412 μU/mL/min [p = 0.02]). The relative bioavailability of the ID versus the SC insulin (AUCID/AUCSC) was similar (median 0.91 [95% confidence interval 0.73–1.27]). Conclusions: ID insulin injection delivered through an MJ needle demonstrated superior PK profile compared with conventional SC administration, including shorter Tmax and higher early and lower late exposure in patients with type 2 diabetes. This may help achieve better insulin coverage of meals and lower postprandial glucose excursions. PMID:27500713

Improved Insulin Pharmacokinetics Using a Novel Microneedle Device for Intradermal Delivery in Patients with Type 2 Diabetes.

PubMed

Kochba, Efrat; Levin, Yotam; Raz, Itamar; Cahn, Avivit

2016-09-01

Currently available short-acting insulin analogs have slower absorption compared with endogenous insulin occasionally resulting in immediate postprandial hyperglycemia. Intradermal (ID) injection facilitates faster drug absorption and may result in improved insulin pharmacokinetics. Seventeen patients with type 2 diabetes were included in this single-center, pilot, open-label crossover study. Patients received 0.2 U/kg Insulin aspart ID injections using a MicronJet (MJ) needle and subcutaneous (SC) injections, using a conventional needle in a crossover design. Thirteen patients were studied under fasting conditions and four before a standard meal test. The pharmacokinetic/pharmacodynamic (PK/PD) profile, as well as the safety and tolerability of injections, was compared. Fourteen patients completed the study per-protocol. ID versus SC injection demonstrated significantly shorter Tmax (median 35 vs. 87.5 min [P < 0.001]), while the Cmax did not significantly differ (median 80 vs. 55 μU/mL [P = 0.085]). Median insulin area under the curve (AUC; 360 min) did not differ between the groups (9914 vs. 10,936 μU/mL/min [p = 0.077]), yet 0-60 min insulin AUC was higher with ID versus SC injection (mean ± SD 3821 ± 1429 vs. 2534 ± 737 μU/mL/min [p = 0.01]) and 4-6 h AUC was lower with ID versus SC injection (mean ± SD 2054 ± 858 vs. 2929 ± 1412 μU/mL/min [p = 0.02]). The relative bioavailability of the ID versus the SC insulin (AUCID/AUCSC) was similar (median 0.91 [95% confidence interval 0.73-1.27]). ID insulin injection delivered through an MJ needle demonstrated superior PK profile compared with conventional SC administration, including shorter Tmax and higher early and lower late exposure in patients with type 2 diabetes. This may help achieve better insulin coverage of meals and lower postprandial glucose excursions.

[Effect of activation and blockade of the GABA-ergic system of the substantia nigra in the midbrain on the realization of conditioned food reflexes in dogs].

PubMed

Iakimovskiĭ, A F

1988-01-01

Bilateral injection of 45 mcg of GABA into substantia nigra pars compacta produced in dogs a manifested improvement of parameters of the conditioned differentiation inhibition but failed to influence the positive Pavlovian alimentary conditioned reflex. Injection of GABA synaptic antagonist--picrotoxin impaired conditioned alimentary behaviour. Numerous injections of the GABAergic pharmacological agents resulted in motor disturbance--rotatory movements--and skin trophic deviations. The data obtained and literature references give ground for discussion of the role of striato-nigral and internal GABAergic substantia nigra systems in the positive modulation of adaptive alimentary behaviour and conditioned stimuli differentiation.

Transarterial Onyx embolization of intracranial dural arteriovenous fistulas: a single center experience.

PubMed

Luo, Chao-Bao; Chang, Feng-Chi; Mu-Huo Teng, Michael; Lin, Chung-Jung; Wu, Hsiu-Mei; Guo, Wan-Yuo; Chang, Cheng-Yen

2014-04-01

Transarterial embolization of intracranial dural arteriovenous fistulas (DAVFs) is usually associated with inadequate embolization. The purpose of this study was to report our experience of transarterial Onyx embolization of intracranial DAVFs with an emphasis on treatment outcome with this new embolic agent in different types of DAVFs. In the past 3 years, a total of 14 intracranial DAVFs have been treated by transarterial Onyx embolization. Among these, there were nine males and five females, aged from 30 years to 82 years (mean = 62 years). We retrospectively analyzed the injection volume and time of Onyx embolization as well as outcomes in different types of DAVFs. The locations of the DAVFs were sigmoid sinus (n = 6), tentorium (n = 3), sinus confluence (n = 2), transverse-sigmoid sinus (n = 1), sigmoid sinus-jugular bulb (n = 1) and the superior petrous sinus (n = 1). The mean volume and time of Onyx injection were 3.4 mL and 28 minutes, respectively (Cognard type I: 4.9 mL, 40 minutes; type II: 4.5 mL, 34 minutes; type III: 2.2 mL, 21 minutes; type IV: 2 mL, 22 minutes). Total fistula occlusion was achieved in six out of seven patients of type III and type IV DAVFs, and in four out of seven patients of type I and type II DAVFs. Nine patients had total resolution of their symptoms, whereas partial regression occurred in five patients. No significant periprocedural complication was found. Mean clinical follow-up period was 16 months. Transarterial Onyx embolization of intracranial DAVFs is safe and effective. This technique is particularly useful in type III and type IV DAVFs with a high cure rate, and lower volume of Onyx as well as a short injection time. Copyright © 2014. Published by Elsevier B.V.

Comparison of the anaesthetic efficacy of and heart rate changes after periodontal ligament or intraosseous X-Tip injection in mandibular molars: a randomized controlled clinical trial.

PubMed

Zarei, M; Ghoddusi, J; Sharifi, E; Forghani, M; Afkhami, F; Marouzi, Parviz

2012-10-01

To compare the efficacy of supplemental anaesthesia using periodontal ligament injections (PDL) and intraosseous injections with the X-Tip system in terms of the measured heart rate and patient reported pain level. In this single-blind randomized clinical trial, 40 patients (22 women, 18 men) with irreversible pulpitis who had experienced unsuccessful pain management by inferior alveolar nerve block with 2% lidocaine and 1 : 100 000 epinephrine were selected. Patients were divided equally and randomly into two groups. Supplementary anaesthesia was provided through intraosseous injection with the X-Tip system (X-Tip group) or by PDL injection (PDL group). After each step of injection, pain severity was assessed using a visual analogue scale. Patient heart rate was recorded with a pulse oximeter. Data were coded and analysed using Mann-Whitney U-test with SPSS (version 16) software. Anaesthetic success was obtained in 100% of X-Tip and 70% of PDL group patients after the first supplemental injection. Compared with the first PDL injection, the first intraosseous injection resulted in a significant increase in heart rate (P = 0.001); however, this increase was short-lived (mean increase: 9-10 beats per min). No significant difference in heart rate or anaesthesia success was observed between men and women. Intraosseous injection using the X-Tip system was more effective than PDL injection as a supplementary anaesthetic for pulpectomy in mandibular molars or second premolars. However, the former resulted in a transient increase in heart rate. © 2012 International Endodontic Journal.

The Ferret as a Surgical Model for Vocal Fold Scar Creation and Treatment.

PubMed

Kodama, Haruka; Kumai, Yoshihiko; Nishimoto, Kohei; Toya, Yutaka; Miyamaru, Satoru; Furushima, Shinobu; Yumoto, Eiji

2018-03-01

To develop a vocal fold (VF) scarring procedure in the ferret, characterize the scars histologically, and test the injectability of the lamina propria (LP). Secondarily, to compare laryngeal anatomy of the ferret with rat and rabbit. The larynges of 18 male ferrets were prepared by unilateral scarring, and normal larynges from 6 female Wistar rats and 5 male albino rabbits were used for comparative purposes. For scarring, the right VF were electrocauterized, ablating the entire LP. Prior to harvesting the larynges at 4 and 16 weeks, each ferret was re-anesthetized, and in 3 animals, India ink was injected into the LPs of both normal and scarred VFs. Laryngoscopic methods and instrumentation for precise visualization, scarring, and injection were developed. The scarred VFs had reduced hyaluronic acid and increased collagen type I, III, and fibronectin compared with normal VFs. The 2 timepoints (4 and 16 weeks) differed significantly only in collagen type III level (levels were higher at 4 weeks). Injected ink migrated from scarred LP to muscle layer just beneath the scarred tissue 3 hours after injection. The ferret is a promising species for creation and experimental treatment of vocal fold scar.

Time-resolved fuel injector flow characterisation based on 3D laser Doppler vibrometry

NASA Astrophysics Data System (ADS)

Crua, Cyril; Heikal, Morgan R.

2014-12-01

Hydrodynamic turbulence and cavitation are known to play a significant role in high-pressure atomizers, but the small geometries and extreme operating conditions hinder the understanding of the flow’s characteristics. Diesel internal flow experiments are generally conducted using x-ray techniques or on transparent, and often enlarged, nozzles with different orifice geometries and surface roughness to those found in production injectors. In order to enable investigations of the fuel flow inside unmodified injectors, we have developed a new experimental approach to measure time-resolved vibration spectra of diesel nozzles using a 3D laser vibrometer. The technique we propose is based on the triangulation of the vibrometer and fuel pressure transducer signals, and enables the quantitative characterisation of quasi-cyclic internal flows without requiring modifications to the injector, the working fluid, or limiting the fuel injection pressure. The vibrometer, which uses the Doppler effect to measure the velocity of a vibrating object, was used to scan injector nozzle tips during the injection event. The data were processed using a discrete Fourier transform to provide time-resolved spectra for valve-closed-orifice, minisac and microsac nozzle geometries, and injection pressures ranging from 60 to 160 MPa, hence offering unprecedented insight into cyclic cavitation and internal mechanical dynamic processes. A peak was consistently found in the spectrograms between 6 and 7.5 kHz for all nozzles and injection pressures. Further evidence of a similar spectral peak was obtained from the fuel pressure transducer and a needle lift sensor mounted into the injector body. Evidence of propagation of the nozzle oscillations to the liquid sprays was obtained by recording high-speed videos of the near-nozzle diesel jet, and computing the fast Fourier transform for a number of pixel locations at the interface of the jets. This 6-7.5 kHz frequency peak is proposed to be the natural frequency for the injector’s main internal fuel line. Other spectral peaks were found between 35 and 45 kHz for certain nozzle geometries, suggesting that these particular frequencies may be linked to nozzle dependent cavitation phenomena.

Theory of the power characteristics of quantum-well lasers with asymmetric barrier layers: Inclusion of asymmetry in electron- and hole-state filling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Asryan, L. V., E-mail: asryan@vt.edu; Zubov, F. I.; Kryzhanovskaya, N. V.

2016-10-15

The power characteristics of quantum-well lasers with asymmetric barrier layers, which represent a novel type of injection laser, are calculated on the basis of an extended model taking into account asymmetry in the filling of electron and hole states. The electron–hole asymmetry is shown to have no significant effect on the characteristics of these lasers. Even in the presence of intermediate layers (located between the quantum well and each of the two asymmetric barrier layers), where parasitic electron–hole recombination does occur, the internal differential quantum efficiency of such a laser exhibits only a weak dependence on the pump current andmore » remains close to unity; therefore, the light–current characteristic remains linear up to high pumping levels.« less

Recovery of rat muscle size but not function more than 1 year after a single botulinum toxin injection.

PubMed

Ward, Samuel R; Minamoto, Viviane B; Suzuki, Kentaro P; Hulst, Jonah B; Bremner, Shannon N; Lieber, Richard L

2018-03-01

Neurotoxin injection is used to treat a wide variety of neuromuscular disorders. The purpose of this study was to measure the functional and structural properties of botulinum toxin-injected adult rat skeletal muscle over nearly the entire lifespan. Ten groups of animals were subjected to either neurotoxin injection [Botox, Type A (BT-A); Allergan, Irvine, California] or saline solution injection. Neurotoxin-injected animals (n = 90) were analyzed at different time-points: 1 week; 1 month; 3 months; 6 months; 12 months; or 18 months. In spite of the recovery of structural features, such as muscle mass and fiber area, dorsiflexion torque production remained significantly depressed by 25%, even at 12 months after neurotoxin injection. The data demonstrate that, after a single BT-A injection, although gross muscle morphology recovered over a 12-month time period, loss of contractile function did not recover. Muscle Nerve 57: 435-441, 2018. © 2017 Wiley Periodicals, Inc.

The brain parenchyma has a type I interferon response that can limit virus spread.

PubMed

Drokhlyansky, Eugene; Göz Aytürk, Didem; Soh, Timothy K; Chrenek, Ryan; O'Loughlin, Elaine; Madore, Charlotte; Butovsky, Oleg; Cepko, Constance L

2017-01-03

The brain has a tightly regulated environment that protects neurons and limits inflammation, designated "immune privilege." However, there is not an absolute lack of an immune response. We tested the ability of the brain to initiate an innate immune response to a virus, which was directly injected into the brain parenchyma, and to determine whether this response could limit viral spread. We injected vesicular stomatitis virus (VSV), a transsynaptic tracer, or naturally occurring VSV-derived defective interfering particles (DIPs), into the caudate-putamen (CP) and scored for an innate immune response and inhibition of virus spread. We found that the brain parenchyma has a functional type I interferon (IFN) response that can limit VSV spread at both the inoculation site and among synaptically connected neurons. Furthermore, we characterized the response of microglia to VSV infection and found that infected microglia produced type I IFN and uninfected microglia induced an innate immune response following virus injection.

Analysis of characteristics associated with reinjection of icatibant: Results from the icatibant outcome survey.

PubMed

Longhurst, Hilary J; Aberer, Werner; Bouillet, Laurence; Caballero, Teresa; Fabien, Vincent; Zanichelli, Andrea; Maurer, Marcus

2015-01-01

Phase 3 icatibant trials showed that most hereditary angioedema (HAE) (C1 inhibitor deficiency) acute attacks were treated successfully with one injection of icatibant, a selective bradykinin B2 receptor antagonist. We conducted a post hoc analysis of icatibant reinjection for HAE type I and II attacks in a real-world setting by using data from the Icatibant Outcome Survey, an ongoing observational study that monitors the safety and effectiveness of icatibant treatment. Descriptive retrospective analyses of icatibant reinjection were performed on Icatibant Outcome Survey data (February 2008 to December 2012). New attacks were defined as the onset of new symptoms after full resolution of the previous attack. Potential associations between the patient and attack characteristics and reinjection were explored by using logistic regression analysis. Icatibant was administered for 652 attacks in 170 patients with HAE type I or II. Most attacks (89.1%) were treated with a single icatibant injection. For attacks that required two or three injections, the second injection was given a median of 11.0 hours after the first injection, with 90.4% of second injections administered ≥6 hours after the first injection. Time to resolution and attack duration were significantly longer for two or three injections versus one icatibant injection (p < 0.0001 and p < 0.05, respectively). Multivariate logistic regression analysis identified sex, attack severity, and laryngeal attacks as significantly correlated with reinjection (all p ≤ 0.05). These factors did not remain predictors for reinjection when two outlier patients with distinct patterns of icatibant use were excluded. In this real-world setting, most HAE attacks resolved with one icatibant injection. There was no distinct profile for patients or attacks that required reinjection when outliers with substantially different patterns of use were excluded. Because new attacks were not distinguished from the recurrence of symptoms, reinjection rates may be slightly higher than shown here. Clinical trial identifier: NCT01034969.

Treatment of Unicameral Bone Cysts of the Proximal Femur With Internal Fixation Lessens the Risk of Additional Surgery.

PubMed

Wilke, Benjamin; Houdek, Matthew; Rao, Rameshwar R; Caird, Michelle S; Larson, A Noelle; Milbrandt, Todd

2017-09-01

Little data exist to guide the treatment of unicameral bone cysts in the proximal femur. Methods of treatment include corticosteroid injections, curettage and bone grafting, and internal fixation. The authors completed a multi-institutional, retrospective review to evaluate their experience with proximal femoral unicameral bone cysts. They posed the following questions: (1) Does internal fixation reduce the risk of further procedures for the treatment of a unicameral bone cyst? (2) Is radiographic healing faster with internal fixation? Following institutional review board approval, the authors conducted a retrospective review of 36 patients treated for a unicameral bone cyst of the proximal femur at their institutions between 1974 and 2014. Medical records and radiographs were reviewed to identify patient demographics and treatment outcomes. Tumor locations included femoral neck (n=13), intertrochanteric (n=16), and subtrochanteric (n=7). Initial treatment included steroid injection (n=2), curettage and bone grafting (n=9), and internal fixation with curettage and bone grafting (n=25). Mean time was 9 months to radiographic healing and 15 months to return to full activity. The number of patients requiring additional surgeries was increased among those who did not undergo internal fixation. There was no difference in time to radiographic healing. However, time to return to normal activities was reduced if patients had received internal fixation. A significant reduction in additional procedures was observed when patients had been treated with internal fixation. Although this did not influence time to radiographic healing, patients did return to normal activities sooner. Internal fixation should be considered in the treatment of proximal femoral unicameral bone cysts. [Orthopedics. 2017; 40(5):e862-e867.]. Copyright 2017, SLACK Incorporated.

Hyaluronan injection in murine osteoarthritis prevents TGFbeta 1-induced synovial neovascularization and fibrosis and maintains articular cartilage integrity by a CD44-dependent mechanism

PubMed Central

2012-01-01

Introduction The mechanism by which intra-articular injection of hyaluronan (HA) ameliorates joint pathology is unknown. Animal studies have shown that HA can reduce synovial activation, periarticular fibrosis and cartilage erosion; however, its specific effects on the different cell types involved remain unclear. We have used the TTR (TGFbeta1 injection and Treadmill Running) model of murine osteoarthritis (OA), which exhibits many OA-like changes, including synovial activation, to examine in vivo tissue-specific effects of intra-articular HA. Methods The kinetics of clearance of fluorotagged HA from joints was examined with whole-body imaging. Naïve and treated knee joints were examined macroscopically for cartilage erosion, meniscal damage and fibrosis. Quantitative histopathology was done with Safranin O for cartilage and with Hematoxylin & Eosin for synovium. Gene expression in joint tissues for Acan, Col1a1, Col2a1, Col3a1, Col5a1, Col10a1, Adamts5 and Mmp13 was done by quantitative PCR. The abundance and distribution of aggrecan, collagen types I, II, III, V and X, ADAMTS5 and MMP13 were examined by immunohistochemistry. Results Injected HA showed a half-life of less than 2 h in the murine knee joint. At the tissue level, HA protected against neovascularization and fibrosis of the meniscus/synovium and maintained articular cartilage integrity in wild-type but not in Cd44 knockout mice. HA injection enhanced the expression of chondrogenic genes and proteins and blocked that of fibrogenic/degradative genes and proteins in cartilage/subchondral bone, whereas it blocked activation of both groups in meniscus/synovium. In all locations it reduced the expression/protein for Mmp13 and blocked Adamts5 expression but not its protein abundance in the synovial lining. Conclusions The injection of HA, 24 h after TGFbeta1 injection, inhibited the cascade of OA-like joint changes seen after treadmill use in the TTR model of OA. In terms of mechanism, tissue protection by HA injection was abrogated by Cd44 ablation, suggesting that interaction of the injected HA with CD44 is central to its protective effects on joint tissue remodeling and degeneration in OA progression. PMID:22721434

Characterizing Mechanical and Flow Properties using Injection Falloff Tests, March 28, 2011

EPA Pesticide Factsheets

This presentation asserts that Injection Fall-off Testing is an efficient way to derive in-situ information on most rock types, after-closure analysis can derive rock transmissibility and pore fluid pressure, and this is used to assist in the HF process.

Heparin allergy: delayed-type non-IgE-mediated allergic hypersensitivity to subcutaneous heparin injection.

PubMed

Trautmann, Axel; Seitz, Cornelia S

2009-08-01

Itching erythematous or eczematous plaques around injection sites are quite frequent side effects of heparin treatment and clinical symptoms of delayed-type non-IgE-mediated allergic hypersensitivity (DTH) to heparin. For diagnosis, intradermal, patch, and subcutaneous challenge tests with heparins are suitable. In most cases, changing the subcutaneous therapy from unfractionated to low molecular weight heparin or treatment with heparinoids does not provide improvement because of extensive cross-reactivity. Hirudin polypeptides, which exhibit a different chemical structure, are a safe therapeutic alternative for subcutaneous application, however. Importantly, despite DTH to subcutaneously injected heparins, most patients tolerate heparin intravenously. Moreover, in case of therapeutic necessity and DTH to heparins, the simple shift from subcutaneous to intravenous heparin administration without prior testing may be justified.

Continuous subcutaneous insulin infusion (CSII) versus multiple insulin injections for type 1 diabetes mellitus.

PubMed

Misso, Marie L; Egberts, Kristine J; Page, Matthew; O'Connor, Denise; Shaw, Jonathan

2010-01-20

Type 1 diabetes is a metabolic disorder resulting from a defect in insulin secretion. Onset of type 1 diabetes mellitus may occur at any age and it is one of the most common chronic diseases of childhood and adolescence. Since there are no interventions known to prevent onset, it is vital that effective treatment regimes are available. Glycaemic control is maintained by replacement of insulin and may be in the form of 'conventional' insulin therapy (multiple injections per day) or continuous subcutaneous insulin infusion (CSII). To assess the effects of CSII compared to multiple insulin injections (MI) in people with type 1 diabetes mellitus. Studies were obtained from electronic searches of The Cochrane Library, MEDLINE, EMBASE and CINAHL. Studies were included if they were randomised controlled trials comparing CSII with three or more insulin injections per day (MI) in people with type 1 diabetes mellitus. Two authors independently assessed risk of bias and extracted characteristics of included studies. Authors contacted study investigators to obtain missing information. Generic inverse variance meta-analyses using a random-effects model were performed. Twenty three studies randomised 976 participants with type 1 diabetes to either intervention. There was a statistically significant difference in glycosylated haemoglobin A1c (HbA1c) favouring CSII (weighted mean difference -0.3% (95% confidence interval -0.1 to -0.4). There were no obvious differences between the interventions for non-severe hypoglycaemia, but severe hypoglycaemia appeared to be reduced in those using CSII. Quality of life measures suggest that CSII is preferred over MI. No significant difference was found for weight. Adverse events were not well reported, no information is available on mortality, morbidity and costs. There is some evidence to suggest that CSII may be better than MI for glycaemic control in people with type 1 diabetes. Non-severe hypoglycaemic events do not appear to be reduced with CSII. There is insufficient evidence regarding adverse events, mortality, morbidity and costs.

Risk of urinary tract infection after detrusor botulinum toxin A injections for refractory neurogenic detrusor overactivity in patients with no antibiotic treatment.

PubMed

Mouttalib, Sofia; Khan, Shahid; Castel-Lacanal, Evelyne; Guillotreau, Julien; De Boissezon, Xavier; Malavaud, Bernard; Marque, Philippe; Rischmann, Pascal; Gamé, Xavier

2010-12-01

To determine if antibiotic prophylaxis is required for intradetrusor botulinum toxin A (BoNT-A) injections. This was a prospective non-randomized study. Inclusion criteria were adult patients with neurogenic detrusor overactivity who failed anticholinergic-based first-line treatment and had sterile urine culture 7 days before injections, a negative dipstick test on the day of the injections, and were performing clean intermittent self-catheterization. Injections were performed using a rigid cystoscope, under local anaesthetic. Patients received BoNT-A as either Botox® (Allergan Inc., Irvine, CA, USA) 300 U in 30 sites or Dysport® (Ipsen Ltd, Ipsen, Paris, France) 750 U in 20 sites. Urine culture was done 6 days and 6 weeks after the injections. If urinary tract infection (UTI) was suspected, a physician performed a complete physical examination. The primary outcome criterion was the occurrence of UTI during the first week after injections. In all, 42 patients (22 women, 20 men) with a mean (sd) age 45.3 (16.4) years were included. A symptomatic UTI occurred during the first week after the injections in three patients (7.1%). The urinary colonization rate was 31% and 26% at 6 days and 6 weeks after injection, respectively. The most common bacterium was Escherichia coli (62.5%). There were no differences between 20 and 30 injection sites or between the sexes. The rate of UTI after intradetrusor injections of BoNT-A was 7.1%. The most frequent bacterium involved was Escherichia coli. These results indicate that antibiotic prophylaxis for intradetrusor BoNT-A injections seems necessary. © 2010 THE AUTHORS. JOURNAL COMPILATION © 2010 BJU INTERNATIONAL.

Sustained enrichment of liver phospholipids and triglycerides in eicosapentaenoate after a bolus intravenous injection of a medium-chain triglycerides:fish oil emulsion to streptozotocin (Type 1) and Goto-Kakizaki (Type 2) diabetic rats.

PubMed

Carpentier, Yvon A; Fontaine, David; Otto, Anne; Portois, Laurence; Fontaine, Jeanine; Malaisse, Willy J

2006-04-01

This study deals with the sustained enrichment of liver phospholipids and triglycerides in long-chain polyunsaturated omega3 fatty acids (omega3) found after the bolus intravenous injection of a novel medium-chain triglyceride:fish oil emulsion (MCT:FO) to streptozotocin (Type 1) and Goto-Kakizaki (Type 2) diabetic rats. Twenty hours after injection of the MCT:FO emulsion, the relative concentration of omega3 was indeed higher in liver phospholipids and triglycerides than that found in rats injected with either saline or a control medium-chain triglyceride:long-chain triglyceride emulsion. This coincided with a decrease in the ponderal percentage of C18:3omega3, C20:4omega6 and/or C22:4omega6 in liver triglycerides. The present study further documents differences between streptozotocin-induced and Goto-Kakizaki diabetic rats in terms of body weight, glycemia, liver triglyceride content and the fatty acid pattern of both liver phospholipids and triglycerides, as well as a close correlation in the latter animals between liver and plasma phospholipids or triglycerides as far as the ratio in the relative concentration of selected fatty acids representative of desaturase and elongase activities is concerned. In light of these and previous findings, it is proposed that the beneficial metabolic and functional events of the MCT:FO emulsion may display not solely a rapid but also sustained time course.

[Types of rabies vaccines which were locally injected to the subjects bitten by animals abroad].

PubMed

Takayama, N

1997-08-01

In recent years there have been a number of subjects who were bitten by supposed rabid animals in foreign rabies-epizootic countries and visited our hospital to received post-exposure therapy after their return to Japan. WHO recommends immediate washing of the wound with soap and water, application of human anti-rabies immunoglobulin and administration of tissue-culture rabies vaccine at 0, 3, 7, 14, 30, and 90 days after exposure. However, tissue-culture vaccines, are expensive and they are not always used in all parts of the world. The author checked whether the victims of animal bite were injected with rabies vaccines abroad or not and investigated the type of rabies vaccine when they were vaccinated. About a half of the consulted victims were locally injected with rabies vaccine. By mean of certificates of inoculation or empty boxes of vaccine, types of rabies vaccines were proved in 40 subjects of which 38 received tissue-culture vaccines. Sample-type vaccine was administered to one subject and suckling mouse vaccine was done to another one. When post-exposure prophylaxis was continued after return to Japan, it is important to know the sort of rabies vaccine injected abroad, because brain-tissue vaccines are less effective in inducing antibody than tissue-culture vaccines. Consequently both physicians and travelers should keep in mind that even now brain-tissue vaccines are used in some areas of the world.

Tattoos and Permanent Make-Up

MedlinePlus

... tattoos you have before any medical procedure. FDA's Role FDA-- has not approved any inks for injecting ... International Programs News & Events Training & Continuing Education Inspections & Compliance Federal, State & Local Officials Consumers Health Professionals Science & ...

Th17 polarized cells from nonobese diabetic mice following mycobacterial adjuvant immunotherapy delay type 1 diabetes.

PubMed

Nikoopour, Enayat; Schwartz, Jordan A; Huszarik, Katrina; Sandrock, Christian; Krougly, Olga; Lee-Chan, Edwin; Singh, Bhagirath

2010-05-01

IL-17-producing T cells are regarded as potential pathogenic T cells in the induction of autoimmune diseases. Previously, we have shown that injection of adjuvants containing Mycobacterium, such as CFA or bacillus Calmette-Guérin, can prevent type 1 diabetes in NOD mice. We injected NOD mice with mycobacterial products s.c. and analyzed the IL-17-producing cells from the draining lymph nodes and spleen by restimulating whole-cell populations or CD4(+) T cells in vitro with or without IL-17-polarizing cytokines. Mice receiving CFA had a concomitant rise in the level of IL-17, IL-22, IL-10, and IFN-gamma in the draining lymph node and spleen. Adoptive transfer of splenocytes from CFA-injected NOD mice polarized with TGF-beta plus IL-6 or IL-23 delayed the development of diabetes in recipient mice. IL-17-producing cells induced by CFA maintained their IL-17-producing ability in the recipient mice. Injection of CFA also changed the cytokine profile of cells in pancreatic tissue by increasing IL-17, IL-10, and IFN-gamma cytokine gene expression. We suggest that the rise in the level of IL-17 after adjuvant therapy in NOD mice has a protective effect on type 1 diabetes development.

Insulin pump treatment compared with multiple daily injections for treatment of type 2 diabetes (OpT2mise): a randomised open-label controlled trial.

PubMed

Reznik, Yves; Cohen, Ohad; Aronson, Ronnie; Conget, Ignacio; Runzis, Sarah; Castaneda, Javier; Lee, Scott W

2014-10-04

Many patients with advanced type 2 diabetes do not meet their glycated haemoglobin targets and randomised controlled studies comparing the efficacy of pump treatment and multiple daily injections for lowering glucose in insulin-treated patients have yielded inconclusive results. We aimed to resolve this uncertainty with a randomised controlled trial (OpT2mise). We did this multicentre, controlled trial at 36 hospitals, tertiary care centres, and referal centres in Canada, Europe, Israel, South Africa, and the USA. Patients with type 2 diabetes who had poor glycaemic control despite multiple daily injections with insulin analogues were enrolled into a 2-month dose-optimisation run-in period. After the run-in period, patients with glycated haemoglobin of 8·0-12·0% (64-108 mmol/mol) were randomly assigned (1:1) by a computer-generated randomisation sequence (block size 2 with probability 0·75 and size 4 with probability 0·25) to pump treatment or to continue with multiple daily injections. Neither patients nor investigators were masked to treatment allocation. The primary endpoint was change in mean glycated haemoglobin between baseline and end of the randomised phase for the intention-to-treat population. This study is registered with ClinicalTrials.gov, number NCT01182493. 495 of 590 screened patients entered the run-in phase and 331 were randomised (168 to pump treatment, 163 to multiple daily injections). Mean glycated haemoglobin at baseline was 9% (75 mmol/mol) in both groups. At 6 months, mean glycated haemoglobin had decreased by 1·1% (SD 1·2; 12 mmol/mol, SD 13) in the pump treatment group and 0·4% (SD 1·1; 4 mmol/mol, SD 12) in the multiple daily injection group, resulting in a between-group treatment difference of -0·7% (95% CI -0·9 to -0·4; -8 mmol/mol, 95% CI -10 to -4, p<0·0001). At the end of the study, the mean total daily insulin dose was 97 units (SD 56) with pump treatment versus 122 units (SD 68) for multiple daily injections (p<0·0001), with no significant difference in bodyweight change between the two groups (1·5 kg [SD 3·5] vs 1·1 kg [3·6], p=0·322). Two diabetes-related serious adverse events (hyperglycaemia or ketosis without acidosis) resulting in hospital admission occurred in the pump treatment group compared with one in the multiple daily injection group. No ketoacidosis occurred in either group and one episode of severe hypoglycaemia occurred in the multiple daily injection group. In patients with poorly controlled type 2 diabetes despite using multiple daily injections of insulin, pump treatment can be considered as a safe and valuable treatment option. Medtronic. Copyright © 2014 Elsevier Ltd. All rights reserved.

Mechanical properties of micro-injected HDPE composites

NASA Astrophysics Data System (ADS)

Bongiorno, A.; Pagano, C.; Agnelli, S.; Baldi, F.; Fassi, I.

2016-03-01

Micro-injection moulding is one of the key manufacturing technologies for the mass production of high value polymeric miniaturized-components. However, this process is not just a straightforward down scaling of the conventional injection moulding technique. Indeed, during the micro-injection the polymer melt is forced to flow at high strain rates through very small channels in non-isothermal conditions, and this can lead to complex microstructures and to parts with unexpected performances. In this work, the relationships among the processing conditions, the mechanical properties and the microstructural characteristics of miniaturized specimens obtained by injection moulding were investigated. Two model systems were considered with the same filler content of 15% wt. (HDPE-talc and HDPE-glass beads), representative of two different types of micro-composites: containing lamellar and spherical micro-particles, respectively. The attention was focused on the influence of the filler type and the process conditions on the mechanical behaviour, examined by uniaxial tensile tests and dynamic-mechanical analyses, and on the morphological characteristics of the specimens, examined by microscopy analyses. The results highlight that mechanical response of the miniaturized specimens is significantly affected by both the filler and the process conditions that can have an influence on the polymer microstructure. Lamellar composites showed the best performance due to the orientation of the talc particles during the micro-injection process, while, different morphologies of the skin/core transition region in dependence on the process temperatures were observable.

INTERNATIONAL CONFERENCE ON SEMICONDUCTOR INJECTION LASERS SELCO-87: Pulsations of light emitted by laser diodes

NASA Astrophysics Data System (ADS)

Enders, P.

1988-11-01

A system of three simple rate equations, derived from equations describing the excess heating near the front face of a resonator, is used as a model of the appearance of spontaneous (self-sustained) pulsations of light emitted by injection lasers. The rate equations are considered as an almost conservative system and the limit cycle is calculated for the system. The good agreement with numerical results favors our approximation, compared with other approximate calculations.

Measurement of axial injection displacement with trim coil current unbalance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Covo, Michel Kireeff, E-mail: mkireeffcovo@lbl.gov

The Dee probe used for measuring internal radial beam intensity shows large losses inside the radius of 20 cm of the 88 in. cyclotron. The current of the top and bottom innermost trim coil 1 is unbalanced to study effects of the axial injection displacement. A beam profile monitor images the ion beam bunches, turn by turn. The experimental bunch center of mass position is compared with calculations of the magnetic mirror effect displacement and shows good agreement.

Variations in corticosteroid/anesthetic injections for painful shoulder conditions: comparisons among orthopaedic surgeons, rheumatologists, and physical medicine and primary-care physicians.

PubMed

Skedros, John G; Hunt, Kenneth J; Pitts, Todd C

2007-07-06

Variations in corticosteroid/anesthetic doses for injecting shoulder conditions were examined among orthopaedic surgeons, rheumatologists, and primary-care sports medicine (PCSMs) and physical medicine and rehabilitation (PMRs) physicians to provide data needed for documenting inter-group differences for establishing uniform injection guidelines. 264 surveys, sent to these physicians in our tri-state area of the western United States, addressed corticosteroid/anesthetic doses and types used for subacromial impingement, degenerative glenohumeral and acromioclavicular arthritis, biceps tendinitis, and peri-scapular trigger points. They were asked about preferences regarding: 1) fluorinated vs. non-fluorinated corticosteroids, 2) acetate vs. phosphate types, 3) patient age, and 4) adjustments for special considerations including young athletes and diabetics. 169 (64% response rate, RR) surveys were returned: 105/163 orthopaedic surgeons (64%RR), 44/77 PCSMs/PMRs (57%RR), 20/24 rheumatologists (83%RR). Although corticosteroid doses do not differ significantly between specialties (p > 0.3), anesthetic volumes show broad variations, with surgeons using larger volumes. Although 29% of PCSMs/PMRs, 44% rheumatologists, and 41% surgeons exceed "recommended" doses for the acromioclavicular joint, >98% were within recommendations for the subacromial bursa and glenohumeral joint. Depo-Medrol(R) (methylprednisolone acetate) and Kenalog(R) (triamcinolone acetonide) are most commonly used. More rheumatologists (80%) were aware that there are acetate and phosphate types of corticosteroids as compared to PCSMs/PMRs (76%) and orthopaedists (60%). However, relatively fewer rheumatologists (25%) than PCSMs/PMRs (32%) or orthopaedists (32%) knew that phosphate types are more soluble. Fluorinated corticosteroids, which can be deleterious to soft tissues, were used with these frequencies for the biceps sheath: 17% rheumatologists, 8% PCSMs/PMRs, 37% orthopaedists. Nearly 85% use the same non-fluorinated corticosteroid for all injections; <10% make adjustments for diabetic patients. Variations between specialists in anesthetic doses suggest that surgeons (who use significantly larger volumes) emphasize determining the percentage of pain attributable to the injected region. Alternatively, this might reflect a more profound knowledge that non-surgeons specialists have of the potentially adverse cardiovascular effects of these agents. Variations between these specialists in corticosteroid/anesthetic doses and/or types, and their use in some special situations (e.g., diabetics), bespeak the need for additional investigations aimed at establishing uniform injection guidelines, and for identifying knowledge deficiencies that warrant advanced education.

Variations in corticosteroid/anesthetic injections for painful shoulder conditions: comparisons among orthopaedic surgeons, rheumatologists, and physical medicine and primary-care physicians

PubMed Central

Skedros, John G; Hunt, Kenneth J; Pitts, Todd C

2007-01-01

Background Variations in corticosteroid/anesthetic doses for injecting shoulder conditions were examined among orthopaedic surgeons, rheumatologists, and primary-care sports medicine (PCSMs) and physical medicine and rehabilitation (PMRs) physicians to provide data needed for documenting inter-group differences for establishing uniform injection guidelines. Methods 264 surveys, sent to these physicians in our tri-state area of the western United States, addressed corticosteroid/anesthetic doses and types used for subacromial impingement, degenerative glenohumeral and acromioclavicular arthritis, biceps tendinitis, and peri-scapular trigger points. They were asked about preferences regarding: 1) fluorinated vs. non-fluorinated corticosteroids, 2) acetate vs. phosphate types, 3) patient age, and 4) adjustments for special considerations including young athletes and diabetics. Results 169 (64% response rate, RR) surveys were returned: 105/163 orthopaedic surgeons (64%RR), 44/77 PCSMs/PMRs (57%RR), 20/24 rheumatologists (83%RR). Although corticosteroid doses do not differ significantly between specialties (p > 0.3), anesthetic volumes show broad variations, with surgeons using larger volumes. Although 29% of PCSMs/PMRs, 44% rheumatologists, and 41% surgeons exceed "recommended" doses for the acromioclavicular joint, >98% were within recommendations for the subacromial bursa and glenohumeral joint. Depo-Medrol® (methylprednisolone acetate) and Kenalog® (triamcinolone acetonide) are most commonly used. More rheumatologists (80%) were aware that there are acetate and phosphate types of corticosteroids as compared to PCSMs/PMRs (76%) and orthopaedists (60%). However, relatively fewer rheumatologists (25%) than PCSMs/PMRs (32%) or orthopaedists (32%) knew that phosphate types are more soluble. Fluorinated corticosteroids, which can be deleterious to soft tissues, were used with these frequencies for the biceps sheath: 17% rheumatologists, 8% PCSMs/PMRs, 37% orthopaedists. Nearly 85% use the same non-fluorinated corticosteroid for all injections; <10% make adjustments for diabetic patients. Conclusion Variations between specialists in anesthetic doses suggest that surgeons (who use significantly larger volumes) emphasize determining the percentage of pain attributable to the injected region. Alternatively, this might reflect a more profound knowledge that non-surgeons specialists have of the potentially adverse cardiovascular effects of these agents. Variations between these specialists in corticosteroid/anesthetic doses and/or types, and their use in some special situations (e.g., diabetics), bespeak the need for additional investigations aimed at establishing uniform injection guidelines, and for identifying knowledge deficiencies that warrant advanced education. PMID:17617900

Osteogenesis Imperfecta Type VI in Individuals from Northern Canada.

PubMed

Ward, Leanne; Bardai, Ghalib; Moffatt, Pierre; Al-Jallad, Hadil; Trejo, Pamela; Glorieux, Francis H; Rauch, Frank

2016-06-01

Osteogenesis imperfecta (OI) type VI is a recessively inherited form of OI that is caused by mutations in SERPINF1, the gene coding for pigment-epithelium derived factor (PEDF). Here, we report on two apparently unrelated children with OI type VI who had the same unusual homozygous variant in intron 6 of SERPINF1 (c.787-10C>G). This variant created a novel splice site that led to the in-frame addition of three amino acids to PEDF (p.Lys262_Ile263insLeuSerGln). Western blotting showed that skin fibroblasts with this mutation produced PEDF but failed to secrete it. Both children were treated with intravenous bisphosphonates, but the treatment of Individual 1 was switched to subcutaneous injections of denosumab (dose 1 mg per kg body weight, repeated every 3 months). An iliac bone sample obtained after 5 denosumab injections (and 3 months after the last injection) showed no change in the increased osteoid parameters that are typical of OI type VI, but the number of osteoclasts in trabecular bone was markedly increased. This suggests that the effect of denosumab on osteoclast suppression is of shorter duration in children with OI type VI than what has previously been reported on adults with osteoporosis.

Multimode Silicon Nanowire Transistors

PubMed Central

2014-01-01

The combined capabilities of both a nonplanar design and nonconventional carrier injection mechanisms are subject to recent scientific investigations to overcome the limitations of silicon metal oxide semiconductor field effect transistors. In this Letter, we present a multimode field effect transistors device using silicon nanowires that feature an axial n-type/intrinsic doping junction. A heterostructural device design is achieved by employing a self-aligned nickel-silicide source contact. The polymorph operation of the dual-gate device enabling the configuration of one p- and two n-type transistor modes is demonstrated. Not only the type but also the carrier injection mode can be altered by appropriate biasing of the two gate terminals or by inverting the drain bias. With a combined band-to-band and Schottky tunneling mechanism, in p-type mode a subthreshold swing as low as 143 mV/dec and an ON/OFF ratio of up to 104 is found. As the device operates in forward bias, a nonconventional tunneling transistor is realized, enabling an effective suppression of ambipolarity. Depending on the drain bias, two different n-type modes are distinguishable. The carrier injection is dominated by thermionic emission in forward bias with a maximum ON/OFF ratio of up to 107 whereas in reverse bias a Schottky tunneling mechanism dominates the carrier transport. PMID:25303290

Long-Term Effects of Botulinum Toxin Complex Type A Injection on Mechano- and Metabo-Sensitive Afferent Fibers Originating from Gastrocnemius Muscle

PubMed Central

Caron, Guillaume; Marqueste, Tanguy; Decherchi, Patrick

2015-01-01

The aim of the present study was to investigate long term effects of motor denervation by botulinum toxin complex type A (BoNT/A) from Clostridium Botulinum, on the afferent fibers originating from the gastrocnemius muscle of rats. Animals were divided in 2 experimental groups: 1) untreated animals acting as control and 2) treated animals in which the toxin was injected in the left muscle, the latter being itself divided into 3 subgroups according to their locomotor recovery with the help of a test based on footprint measurements of walking rats: i) no recovery (B0), ii) 50% recovery (B50) and iii) full recovery (B100). Then, muscle properties, metabosensitive afferent fiber responses to potassium chloride (KCl) and lactic acid injections and Electrically-Induced Fatigue (EIF), and mechanosensitive responses to tendon vibrations were measured. At the end of the experiment, rats were killed and the toxin injected muscles were weighted. After toxin injection, we observed a complete paralysis associated to a loss of force to muscle stimulation and a significant muscle atrophy, and a return to baseline when the animals recover. The response to fatigue was only decreased in the B0 group. The responses to KCl injections were only altered in the B100 groups while responses to lactic acid were altered in the 3 injected groups. Finally, our results indicated that neurotoxin altered the biphasic pattern of response of the mechanosensitive fiber to tendon vibrations in the B0 and B50 groups. These results indicated that neurotoxin injection induces muscle afferent activity alterations that persist and even worsen when the muscle has recovered his motor activity. PMID:26485650

Long-Term Effects of Botulinum Toxin Complex Type A Injection on Mechano- and Metabo-Sensitive Afferent Fibers Originating from Gastrocnemius Muscle.

PubMed

Caron, Guillaume; Marqueste, Tanguy; Decherchi, Patrick

2015-01-01

The aim of the present study was to investigate long term effects of motor denervation by botulinum toxin complex type A (BoNT/A) from Clostridium Botulinum, on the afferent fibers originating from the gastrocnemius muscle of rats. Animals were divided in 2 experimental groups: 1) untreated animals acting as control and 2) treated animals in which the toxin was injected in the left muscle, the latter being itself divided into 3 subgroups according to their locomotor recovery with the help of a test based on footprint measurements of walking rats: i) no recovery (B0), ii) 50% recovery (B50) and iii) full recovery (B100). Then, muscle properties, metabosensitive afferent fiber responses to potassium chloride (KCl) and lactic acid injections and Electrically-Induced Fatigue (EIF), and mechanosensitive responses to tendon vibrations were measured. At the end of the experiment, rats were killed and the toxin injected muscles were weighted. After toxin injection, we observed a complete paralysis associated to a loss of force to muscle stimulation and a significant muscle atrophy, and a return to baseline when the animals recover. The response to fatigue was only decreased in the B0 group. The responses to KCl injections were only altered in the B100 groups while responses to lactic acid were altered in the 3 injected groups. Finally, our results indicated that neurotoxin altered the biphasic pattern of response of the mechanosensitive fiber to tendon vibrations in the B0 and B50 groups. These results indicated that neurotoxin injection induces muscle afferent activity alterations that persist and even worsen when the muscle has recovered his motor activity.

Monolithic fuel injector and related manufacturing method

DOEpatents

Ziminsky, Willy Steve [Greenville, SC; Johnson, Thomas Edward [Greenville, SC; Lacy, Benjamin [Greenville, SC; York, William David [Greenville, SC; Stevenson, Christian Xavier [Greenville, SC

2012-05-22

A monolithic fuel injection head for a fuel nozzle includes a substantially hollow vesicle body formed with an upstream end face, a downstream end face and a peripheral wall extending therebetween, an internal baffle plate extending radially outwardly from a downstream end of the bore, terminating short of the peripheral wall, thereby defining upstream and downstream fuel plenums in the vesicle body, in fluid communication by way of a radial gap between the baffle plate and the peripheral wall. A plurality of integral pre-mix tubes extend axially through the upstream and downstream fuel plenums in the vesicle body and through the baffle plate, with at least one fuel injection hole extending between each of the pre-mix tubes and the upstream fuel plenum, thereby enabling fuel in the upstream plenum to be injected into the plurality of pre-mix tubes. The fuel injection head is formed by direct metal laser sintering.

Effect of the Reservoir Volume on the Discharge Pressures in the Injection System of the N.A.C.A. Spray Photography Equipment

NASA Technical Reports Server (NTRS)

Rothrock, A M; Lee, D W

1932-01-01

Tests were made to determine the effect of the reservoir volume on the discharge pressures in the injection system of the N.A.C.A. spray photography equipment. The data obtained are applicable to the design of a common rail fuel-injection system. The data show that an injection system of the type described can be designed so that not more than full load fuel quantity can be injected into the engine cylinders, and so that the fuel spray characteristics remain constant over a large range of engine speeds. Formulas are presented for computing the volume of the reservoir and the diameter of the discharge orifice.

Mixed mode fuel injector with individually moveable needle valve members

DOEpatents

Stewart, Chris; Chockley, Scott A.; Ibrahim, Daniel R.; Lawrence, Keith; Tomaseki, Jay; Azam, Junru H.; Tian, Steven Ye; Shafer, Scott F.

2004-08-03

A fuel injector includes a homogenous charge nozzle outlet set and a conventional nozzle outlet set controlled respectively, by first and second needle valve members. One of the needle valve members moves to an open position while the other needle valve member remains stationary for a homogeneous charge injection event. The former needle valve member stays stationary while the other needle valve member moves to an open position for a conventional injection event. One of the needle valve members is at least partially positioned in the other needle valve member. Thus, the injector can perform homogeneous charge injection events, conventional injection events, or even a mixed mode having both types of injection events in a single engine cycle.

Pegaspargase Injection

MedlinePlus

Pegaspargase is used with other chemotherapy drugs to treat a certain type of acute lymphocytic leukemia (ALL; a type of cancer of the white blood cells). Pegaspargase is also used with other chemotherapy ...

Micro-fragmented adipose tissue injection for the treatment of complex anal fistula: a pilot study accessing safety and feasibility.

PubMed

Naldini, G; Sturiale, A; Fabiani, B; Giani, I; Menconi, C

2018-02-01

The aim of the present study was to evaluate the safety and efficacy of autologous, micro-fragmented and minimally manipulated adipose tissue injection associated closure of the internal opening in promoting healing of complex anal fistula. A pilot study was conducted on patients referred to our center with anal fistula, from April 2015-December 2016. Inclusion criteria were age over 16 years old and a diagnosis of complex anal fistula according to the American Gastroenterological Association classification The patients were divided into 2 groups; the "first time group" (Group I) in which micro-fragmented adipose tissue injection with closure of the internal opening was the first sphincter-saving procedure, and the "recurrent group" (Group II) consisting of patients who had failed prior sphincter-saving procedures. The procedure was carried out 4-6 weeks after seton placement. Follow-up visits were scheduled at 7 days, and 1, 3, 6 and 12 months after surgery. Fistula healing was defined as the closure of the internal and external openings without any discharge. Out of 47 patients with complex transsphincteric anal fistula, 19 met the inclusion criteria and were selected to undergo the procedure. Twelve of these patients (Group I) had micro-fragmented adipose tissue injection as first-line treatment, and 7 (Group II) had failed previous sphincter-saving procedures. The mean operative time was 55 ± 6 min (range 50-70 min). The mean postoperative pain score measured with the visual analog pain scale was 2 ± 1.4 (range 0-4). No intraoperative difficulties related to the use of the kit were recorded. There were no cases of postoperative fever or abdominal sepsis related to the procedure and no post-treatment perianal bleeding or impaired anal continence. Only 3 cases of minor abdominal wall hematoma that did not require any treatment and 1 case of perianal abscess were observed. Patients were evaluated for a mean follow-up time of 9 ± 3.1 months (range 3-12 months). The overall healing rate was 73.7, 83.3% for Group I and 57.1% for Group II. The injection of autologous, micro-fragmented and minimally manipulated adipose tissue associated with closure of the internal opening is a safe, feasible and reproducible procedure and may enhance complex anal fistula healing.

Understanding compliance issues for daily self-injectable treatment in ambulatory care settings

PubMed Central

Brod, Meryl; Rousculp, Matthew; Cameron, Ann

2008-01-01

Background The challenge of understanding factors influencing compliance with injectable treatments is critical as injectable biologics/medications become more common. Objective Understanding compliance issues for long term self-injectable treatments, using a chronic condition (osteoporosis) as a model. Research design A qualitative study to generate hypotheses regarding compliance issues for self-injectable treatments. Semi-structured interview guides were developed and data collected from patients and clinical experts. Findings were analyzed for common themes and a conceptual model of the compliance impact of self-injectable treatments generated. Subjects Six physicians (Rheumatology, Internal Medicine, and Endocrinology) and 22 patients (14% never began treatment, 23% had filled at least one prescription but discontinued treatment, and 63% were currently on treatment) were interviewed. Results Physician and patient factors influenced the compliance process at four distinct time-points: pre-treatment, time treatment recommended, short-term, and long-term. Physician factors that influenced patients’ persistence were knowledge about treatment, patient-training resources, and clinical profile/efficacy evaluations. For patients, motivation level, physician message, and clinical profile were key. Logistical issues, minor side effects and injection site issues influenced adherence but not persistence. Conclusions Compliance is a multifactorial, dynamic process. Both physician and patient factors influence compliance at different points in the process. PMID:19920953

Development of devices for self-injection: using tribological analysis to optimize injection force

PubMed Central

Lange, Jakob; Urbanek, Leos; Burren, Stefan

2016-01-01

This article describes the use of analytical models and physical measurements to characterize and optimize the tribological behavior of pen injectors for self-administration of biopharmaceuticals. One of the main performance attributes of this kind of device is its efficiency in transmitting the external force applied by the user on to the cartridge inside the pen in order to effectuate an injection. This injection force characteristic is heavily influenced by the frictional properties of the polymeric materials employed in the mechanism. Standard friction tests are available for characterizing candidate materials, but they use geometries and conditions far removed from the actual situation inside a pen injector and thus do not always generate relevant data. A new test procedure, allowing the direct measurement of the coefficient of friction between two key parts of a pen injector mechanism using real parts under simulated use conditions, is presented. In addition to the absolute level of friction, the test method provides information on expected evolution of friction over lifetime as well as on expected consistency between individual devices. Paired with an analytical model of the pen mechanism, the frictional data allow the expected overall injection system force efficiency to be estimated. The test method and analytical model are applied to a range of polymer combinations with different kinds of lubrication. It is found that material combinations used without lubrication generally have unsatisfactory performance, that the use of silicone-based internal lubricating additives improves performance, and that the best results can be achieved with external silicone-based lubricants. Polytetrafluoroethylene-based internal lubrication and external lubrication are also evaluated but found to provide only limited benefits unless used in combination with silicone. PMID:27274319

Psychometric properties of the Blood-borne Virus Transmission Risk Assessment Questionnaire (BBV-TRAQ).

PubMed

Fry, Craig L; Lintzeris, Nick

2003-02-01

To develop a standard measure of blood-borne virus transmission risk behaviour, and examine the underlying psychometric properties. The Blood-borne Virus Transmission Risk Assessment Questionnaire (BBV-TRAQ) was developed over three consecutive phases of the original BBV-TRAQ study in adherence to classical scale development procedures, culminating in the recruitment of a development sample of current injecting drug users via convenience and snowball sampling. Needle and syringe programmes (NSPs), medical clinics, alcohol/drug agencies, peer-based and outreach organizations across inner and outer metropolitan Melbourne. Two hundred and nine current injecting drug users. The mean age was 27 years, 68% were male, 65% unemployed, 36% with prison history and 25% in methadone maintenance. BBV-TRAQ items cover specific injecting, sexual and skin penetration risk practices. BBV-TRAQ characteristics were assessed via measures of internal and test-retest reliability; collateral validation; and principal components analyses. The BBV-TRAQ has satisfactory psychometric properties. Internal (a=0.87), test-retest (r=0.84) and inter-observer reliability results were high, suggesting that the instrument provides a reliable measure of BBV risk behaviour and is reliable over time and across interviewers. A principal components analysis with varimax rotation produced a parsimonious factor solution despite modest communality, and indicated that three factors (injecting, sex and skin penetration/hygiene risks) are required to describe BBV risk behaviour. The BBV-TRAQ is reliable and represents the first risk assessment tool to incorporate sufficient coverage of injecting, sex and other skin penetration risk practices to be considered truly content valid. The questionnaire is indicated for use in addictions research, clinical, peer education and BBV risk behaviour surveillance settings.

Psychometric Assessment of the Injection Pen Assessment Questionnaire (IPAQ): measuring ease of use and preference with injection pens for human growth hormone

PubMed Central

2012-01-01

Purpose To examine the psychometric properties of the Injection Pen Assessment Questionnaire (IPAQ) including the following: 1) item and scale characteristics (e.g., frequencies, item distributions, and factor structure), 2) reliability, and 3) validity. Methods Focus groups and one-on-one dyad interviews guided the development of the IPAQ. The IPAQ was subsequently tested in 136 parent–child dyads in a Phase 3, 2-month, open-label, multicenter trial for a new Genotropin® disposable pen. Factor analysis was performed to inform the development of a scoring algorithm, and reliability and validity of the IPAQ were evaluated using the data from this two months study. Psychometric analyses were conducted separately for each injection pen. Results Confirmatory factor analysis provides evidence supporting a second order factor solution for four subscales and a total IPAQ score. These factor analysis results support the conceptual framework developed from previous qualitative research in patient dyads using the reusable pen. However, the IPAQ subscales did not consistently meet acceptable internal consistency reliability for some group level comparisons. Cronbach’s alphas for the total IPAQ score for both pens were 0.85, exceeding acceptable levels of reliability for group comparisons. Conclusions The total IPAQ score is a useful measure for evaluating ease of use and preference for injection pens in clinical trials among patient dyads receiving hGH. The psychometric properties of the individual subscales, mainly the lower internal consistency reliability of some of the subscales and the predictive validity findings, do not support the use of subscale scores alone as a primary endpoint. PMID:23046797

Large-volume injection of sample diluents not miscible with the mobile phase as an alternative approach in sample preparation for bioanalysis: an application for fenspiride bioequivalence.

PubMed

Medvedovici, Andrei; Udrescu, Stefan; Albu, Florin; Tache, Florentin; David, Victor

2011-09-01

Liquid-liquid extraction of target compounds from biological matrices followed by the injection of a large volume from the organic layer into the chromatographic column operated under reversed-phase (RP) conditions would successfully combine the selectivity and the straightforward character of the procedure in order to enhance sensitivity, compared with the usual approach of involving solvent evaporation and residue re-dissolution. Large-volume injection of samples in diluents that are not miscible with the mobile phase was recently introduced in chromatographic practice. The risk of random errors produced during the manipulation of samples is also substantially reduced. A bioanalytical method designed for the bioequivalence of fenspiride containing pharmaceutical formulations was based on a sample preparation procedure involving extraction of the target analyte and the internal standard (trimetazidine) from alkalinized plasma samples in 1-octanol. A volume of 75 µl from the octanol layer was directly injected on a Zorbax SB C18 Rapid Resolution, 50 mm length × 4.6 mm internal diameter × 1.8 µm particle size column, with the RP separation being carried out under gradient elution conditions. Detection was made through positive ESI and MS/MS. Aspects related to method development and validation are discussed. The bioanalytical method was successfully applied to assess bioequivalence of a modified release pharmaceutical formulation containing 80 mg fenspiride hydrochloride during two different studies carried out as single-dose administration under fasting and fed conditions (four arms), and multiple doses administration, respectively. The quality attributes assigned to the bioanalytical method, as resulting from its application to the bioequivalence studies, are highlighted and fully demonstrate that sample preparation based on large-volume injection of immiscible diluents has an increased potential for application in bioanalysis.

Relation Between Subacromial Bursitis on Ultrasonography and Efficacy of Subacromial Corticosteroid Injection in Rotator Cuff Disease: A Prospective Comparison Study.

PubMed

Lee, Doo-Hyung; Hong, Ji Yeon; Lee, Michael Young; Kwack, Kyu-Sung; Yoon, Seung-Hyun

2017-05-01

To evaluate the correlations between subacromial bursitis (bursal thickening and effusion) on ultrasonography and its response to subacromial corticosteroid injection in patients with rotator cuff disease. Prospective, longitudinal comparison study. University-affiliated tertiary care hospital. Patients with rotator cuff disease (N=69) were classified into 3 groups based on ultrasonographic findings; (1) normative bursa group (group 1, n=23): bursa and effusion thickness <1mm; (2) bursa thickening group (group 2, n=22): bursa thickness >2mm and effusion thickness <1mm; and (3) bursa effusion group (group 3, n=24): bursa thickness <1mm and effusion thickness >2mm. A single subacromial injection with 20mg of triamcinolone acetonide. Visual analog scale (VAS) of shoulder pain, Shoulder Disability Questionnaire (SDQ), angles of active shoulder range of motion (flexion, abduction, external rotation, and internal rotation), and bursa and effusion thickness at pre- and posttreatment at week 8. There were no significant differences between the 3 groups in demographic characteristics pretreatment. Groups 2 and 3 showed a significant difference compared with group 1 in changes on the VAS and abduction; group 3 showed a significant difference compared with group 1 in changes of the SDQ, internal rotation, and external rotation; and all groups showed significant differences when compared with each other (groups 1 and 3, 2 and 3, and 1 and 2) in changes of thickness. A patient with ultrasonographic observation of subacromial bursitis, instead of normative bursa, can expect better outcome with subacromial corticosteroid injection. Therefore, we recommend a careful selection of patients using ultrasonography prior to injection. Copyright © 2016 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Regulation of Spinal Substance P Release by Intrathecal Calcium Channel Blockade

PubMed Central

Takasusuki, Toshifumi; Yaksh, Tony L.

2012-01-01

Background We investigated the role of different voltage sensitive calcium channels expressed at presynaptic afferent terminals in substance P release and on nociceptive behavior evoked by intraplantar formalin by examining the effects of intrathecally delivered N- (ziconotide), T- (mibefradil) and L-type voltage sensitive calcium channels blockers (diltiazem and verapamil). Methods Rats received intrathecal pretreatment with saline or doses of morphine, ziconotide, mibefradil, diltiazem or verapamil. The effect of these injections upon flinching evoked by intraplantar formalin (5%, 50μl) was quantified. To assess substance P release, the incidence of neurokinin 1 receptor internalization in the ipsilateral and contralateral lamina I was determined in immunofluorescent stained tissues. Results Intrathecal morphine (20μg), ziconotide (0.3, 0.6 and 1μg), mibefradil (100μg, but not 50μg), diltiazem (500μg, but not 300μg) and verapamil (200μg, but not 50 and 100μg) reduced paw flinching in phase 2 as compared to vehicle control (P < 0.05), with no effect upon phase 1. Ziconotide (0.3, 0.6 and 1μg) and morphine (20μg) significantly inhibited neurokinin 1 receptor internalization (P < 0.05), but mibefradil, diltiazem and verapamil at the highest doses had no effect. Conclusion These results emphasize the role in vivo of N-, but not T- and L-type voltage sensitive calcium channels in mediating the stimulus evoked substance P release from small primary afferents and suggest that T- and L-type voltage sensitive calcium channels blockers exert antihyperalgesic effects by an action on other populations of afferents or mechanisms involving post synaptic excitability. PMID:21577088

40 CFR 146.86 - Injection well construction requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... stages. (4) Circulation of cement may be accomplished by staging. The Director may approve an alternative... injection tubing and long string casing. (b) Casing and cementing of Class VI wells. (1) Casing and cement... confining zone(s); (viii) Type or grade of cement and cement additives; and (ix) Quantity, chemical...

Government Contracting Should Be a Core Competence for U.S. Military Personnel

DTIC Science & Technology

2014-12-01

selves may have distorted the local market , creating inflation problems in the region.65 Thus, long-term projects or services that are to be turned...are injected into the process to avoid rampant single-award-task and-delivery order contracts that effectively inject monopolistic -type pricing

40 CFR 144.26 - Inventory requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... requirements. The owner or operator of an injection well which is authorized by rule under this subpart shall... the well upon failure to submit inventory information for the well within the time frame specified in...) Name and address of legal contact; (3) Ownership of facility; (4) Nature and type of injection wells...

Promoted new bone formation in maxillary distraction osteogenesis using a tissue-engineered osteogenic material.

PubMed

Kinoshita, Kazuhiko; Hibi, Hideharu; Yamada, Yoichi; Ueda, Minoru

2008-01-01

Bilateral maxillary distraction was performed at a higher rate in rabbits to determine whether locally applied tissue-engineered osteogenic material (TEOM) enhances bone regeneration. The material was an injectable gel composed of autologous mesenchymal stem cells, which were cultured then induced to be osteogenic in character, and platelet-rich plasma (PRP). After a 5-day latency period, distraction devices were activated at a rate of 2.0 mm once daily for 4 days. Twelve rabbits were divided into 2 groups. At the end of distraction, the experimental group of rabbits received an injection of TEOM into the distracted tissue on one side, whereas, saline solution was injected into the distracted tissue on the contralateral side as the internal control. An additional control group received an injection of PRP or saline solution into the distracted tissue in the same way as the experimental group. The distraction regenerates were assessed by radiological and histomorphometric analyses. The radiodensity of the distraction gap injected with TEOM was significantly higher than that injected with PRP or saline solution at 2, 3, and 4 weeks postdistraction. The histomorphometric analysis also showed that both new bone zone and bony content in the distraction gap injected with TEOM were significantly increased when compared with PRP or saline solution. Our results demonstrated that the distraction gap injected with TEOM showed significant new bone formation. Therefore, injections of TEOM may be able to compensate for insufficient distraction gaps.

Adrenomedullin and angiopoietin-1 additively restore erectile function in diabetic rats: comparison with the combination therapy of vascular endothelial growth factor and angiopoietin-1.

PubMed

Nishimatsu, Hiroaki; Suzuki, Etsu; Nomiya, Akira; Niimi, Aya; Suzuki, Motofumi; Fujimura, Tetsuya; Fukuhara, Hiroshi; Homma, Yukio

2013-07-01

Erectile dysfunction (ED) is a major health problem. We have shown that adrenomedullin (AM) restores erectile function in diabetic rats. The aim of this study is to explore a better treatment for ED, we examined whether combination of AM and angiopoietin-1 (Ang-1) was more effective to treat ED than treatment with AM alone or Ang-1 alone. We also compared the effect of the combination therapy with that of treatment with vascular endothelial growth factor-A (VEGF-A). Male Wistar rats were injected with streptozotocin (STZ) to induce diabetes. Adenoviruses expressing AM (AdAM), Ang-1 (AdAng-1), and VEGF-A (AdVEGF-A) were injected into the penis 6 weeks after STZ administration. Erectile function, penile histology, and protein expression were analyzed 4 weeks after the injection of the adenoviruses. Intracavernous pressure and mean arterial pressure were measured to evaluate erectile function. The morphology of the penis was analyzed by Elastica van Gieson stain and immunohistochemistry. The expression of α-smooth muscle actin (SMA), VE-cadherin and type I collagen was assessed by Western blot analysis. Infection with AdAM plus AdAng-1 more effectively restored erectile function than infection with AdAM alone or AdAng-1 alone. This combination therapy restored erectile function to a level similar to that observed in the age-matched Wistar rats. Expression of SMA and VE-cadherin increased more significantly in the AdAM plus AdAng-1-treated group than in the AdAM- or AdAng-1-treated group. Although AdVEGF-A infection restored erectile function significantly, it also caused enlargement of the trabeculae of the cavernous body, aberrant angiogenesis, and overproduction of type I collagen. These results suggested that combination therapy with AM and Ang-1 potently restored erectile function and normal morphology of the cavernous body compared with VEGF-A administration. This combination therapy will be useful to treat ED patients with a severely damaged cavernous body. © 2013 International Society for Sexual Medicine.

New Insulin Glargine 300 Units/mL Versus Glargine 100 Units/mL in People With Type 1 Diabetes: A Randomized, Phase 3a, Open-Label Clinical Trial (EDITION 4).

PubMed

Home, Philip D; Bergenstal, Richard M; Bolli, Geremia B; Ziemen, Monika; Rojeski, Maria; Espinasse, Melanie; Riddle, Matthew C

2015-12-01

Insulin therapy in type 1 diabetes still provides suboptimal outcomes. Insulin glargine 300 units/mL (Gla-300), with a flatter pharmacodynamic profile compared with insulin glargine 100 units/mL (Gla-100), is an approach to this problem. People with type 1 diabetes, using a mealtime and basal insulin regimen, were randomized open-label to Gla-300 or Gla-100 and to morning or evening injection, continuing the mealtime analog, and followed for 6 months. Participants (n = 549) were a mean age of 47 years and had a mean duration of diabetes of 21 years and BMI of 27.6 kg/m(2). The change in HbA1c (primary end point; baseline 8.1%) was equivalent in the two treatment groups (difference, 0.04% [95% CI -0.10 to 0.19]) (0.4 mmol/mol [-1.1 to 2.1]), and Gla-300 was thus noninferior. Similar results with wider 95% CIs were found for morning and evening injection times and for prebreakfast self-measured plasma glucose (SMPG) overall. Results were also similar for Gla-300 when morning and evening injection time was compared, including overlapping 8-point SMPG profiles. Hypoglycemia did not differ, except for the first 8 weeks of the study, when nocturnal confirmed or severe hypoglycemia was lower with Gla-300 (rate ratio 0.69 [95% CI 0.53-0.91]). Hypoglycemia with Gla-300 did not differ by time of injection. The basal insulin dose was somewhat higher at 6 months for Gla-300. The adverse event profile did not differ and was independent of the Gla-300 time of injection. Weight gain was lower with Gla-300. In long-duration type 1 diabetes, Gla-300 provides similar glucose control to Gla-100, with a lower risk of hypoglycemia after transfer from other insulins, independent of time of injection, and less weight gain. © 2015 by the American Diabetes Association. Readers may use this article as long as the work is properly cited, the use is educational and not for profit, and the work is not altered.

Effects of injection position and transponder size on the performances of passive injectable transponders used for the electronic identification of cattle.

PubMed

Conill, C; Caja, G; Nehring, R; Ribó, O

2000-12-01

A total of 686 Tiris half-duplex passive injectable transponders (PIT) of two sizes (23 and 32 mm) were randomly injected s.c. in three positions, armpit, ear scutulum, and upper lip, in 343 fattening calves (1 to 3 mo old). Injections were performed by two trained and two untrained operators. Losses and breakages on the farm were recorded at wk 1, 3, 7, 11, and 15 in restrained animals using two types of hand-held transceivers with a stick antenna. Dynamic reading efficiency (DRE) in animals running through a raceway was also evaluated at wk 1 and 3 and monthly until slaughter, using a stationary transceiver working at 137 dB x microV x m(-1) at 3 m. The total number of PIT that fell or broke in the slaughtering line, the location method, and the recovery time were also recorded. Results on the farm showed low breakages on average (0.4%) and differences (P < 0.05) in losses according to position (armpit, 1.7%; ear, 5.2%; and lip, 14.0%). An interaction (P < 0.05) between position x size was observed, and losses were greatest using a 32-mm PIT in the lip. The DRE was affected (P < 0.05) by PIT position and size, and values were greater for the 32-mm PIT in all positions (armpit: 99.9 +/- 0.1 vs 95.8 +/- 4.9%; ear: 93.8 +/- 2.2 vs 81.9 +/- 4.6%; lip: 66.8 +/- 4.9 vs 53.4 +/- 4.7%, respectively, for 32 vs 23 mm). Recovery of PIT in the abattoir was on average 96.7, 96.7, and 99.2% for armpit, ear, and lip, respectively (P > 0.05). Most of the PIT injected in the armpit were recovered by sight or palpation, but 31.9% were recovered after cutting the muscles around the area and 10.7% were recovered on the internal side of the hide, which jeopardized carcass identification. Recovery of PIT injected in the ear was 23.4% in the hide and 76.6% in the auricular muscles of the head. The easiest recovery was in the lip, 8.9% of PIT were located in the hide and 91.1% in the head. Recovery time was affected (P < 0.05) by position: the quickest was lip (27 +/- 2 s), followed by ear (52 +/- 5 s) and armpit (78 +/- 7 s). In conclusion, taking into account retention and reading performances, injection of a 32-mm PIT into the armpit showed the best results on the farm, but a careful and longer recovery was needed in the abattoir. Improvement of recovery methodology and time would be necessary in order to recommend injection of PIT in the armpit instead of in the ear for cattle tracking or monitoring.

The efficacy of intra-articular hyaluronan injection after the microfracture technique for the treatment of articular cartilage lesions.

PubMed

Strauss, Eric; Schachter, Aaron; Frenkel, Sally; Rosen, Jeffrey

2009-04-01

Although the exact mechanism of action has yet to be elucidated, recent animal studies have demonstrated chondroprotective and anti-inflammatory properties of hyaluronic acid viscosupplementation. Intra-articular hyaluronic acid after microfracture improves the quality of the repair leading to a more hyaline-like repair tissue with better defect fill and adjacent area integration. Controlled laboratory study. Full-thickness cartilage defects were created in the weightbearing area of the medial femoral condyle in 36 female New Zealand White rabbits. The defects were then treated with surgical microfracture. Eighteen rabbits formed the 3-month cohort and the other 18 formed the 6-month cohort. Within each cohort, 6 rabbits were randomly assigned to receive 3 weekly injections of hyaluronic acid (group A), 5 weekly injections (group B), or control injections of normal saline (group C). At 3 and 6 months postmicrofracture, the animals were sacrificed and the operative knee harvested. Repair tissue was assessed blinded- both grossly, using a modified component of the International Cartilage Repair Society (ICRS) Cartilage Repair Assessment scoring scale, and histologically, using the modified O'Driscoll histological cartilage scoring system. Comparisons were made with respect to gross and histologic findings between treatment groups at each time point. Effects of each treatment type were also evaluated longitudinally by comparing the 3-month results with the 6-month results. Statistical analysis was performed using unpaired Student t tests with significance defined as P < .05. At 3 months, gross and histologic evaluation of the repair tissue demonstrated that the 3-injection group had significantly better fill of the defects and more normal appearing, hyaline-like tissue than controls (a mean ICRS score of 1.92 vs 1.26; P < .05 and a mean modified O'Driscoll score of 10.3 vs 7.6; P < .02). Specimens treated with 5 weekly injections were not significantly improved compared with controls. At 6 months, the mean gross appearance and histologic scores between the 3 specimen cohorts were not significantly different. However, examination of the entire operative knee demonstrated a significantly greater extent of degenerative changes (synovial inflammation and osteophyte formation) in the control group than in both hyaluronic acid treatment groups (P < .05). Supplementing the microfracture technique with 3 weekly injections of intra-articular hyaluronic acid had a positive effect on the repair tissue that formed within the chondral defect at the early follow-up time point. This improvement was not found for the 3-injection group at 6 months or for the 5-injection group at either time point. Additionally, hyaluronic acid supplementation had a possible chondroprotective and anti-inflammatory effect, limiting the development of degenerative changes within the knee joint. The adjunctive use of hyaluronic acid appears to hold promise in the treatment of chondral injuries and warrants further investigation.

Performance Enhancement of Organic Light-Emitting Diodes Using Electron-Injection Materials of Metal Carbonates

NASA Astrophysics Data System (ADS)

Shin, Jong-Yeol; Kim, Tae Wan; Kim, Gwi-Yeol; Lee, Su-Min; Shrestha, Bhanu; Hong, Jin-Woong

2016-05-01

Performance of organic light-emitting diodes was investigated depending on the electron-injection materials of metal carbonates (Li2CO3 and Cs2CO3 ); and number of layers. In order to improve the device efficiency, two types of devices were manufactured by using the hole-injection material (Teflon-amorphous fluoropolymer -AF) and electron-injection materials; one is a two-layer reference device ( ITO/Teflon-AF/Alq3/Al ) and the other is a three-layer device (ITO/Teflon-AF/Alq3/metal carbonate/Al). From the results of the efficiency for the devices with hole-injection layer and electron-injection layer, it was found that the electron-injection layer affects the electrical properties of the device more than the hole-injection layer. The external-quantum efficiency for the three-layer device with Li2CO3 and Cs2CO3 layer is improved by approximately six and eight times, respectively, compared with that of the two-layer reference device. It is thought that a use of electron-injection layer increases recombination rate of charge carriers by the active injection of electrons and the blocking of holes.

[Comparative analysis of metabotropic and ionotropic glutamate striatal receptors blockade influence on rats locomotor behaviour].

PubMed

Iakimovskiĭ, A F; Kerko, T V

2013-02-01

The influence of NMDA and metabotropic neostriatal glutamate receptors blockade to avoidance conditioning (in shuttle box) and free locomotor behavior (in open field) in chronic experiments in rats were investigated. The glutamate receptor antagonists were injected bilateral into striatum separately and with the GABA-A receptor antagonist picrotoxin (2 microg), that produced in rats the impairment of avoidance conditioning and choreo-myoklonic hyperkinesis. The most effective in preventing of negative picrotoxin influence on behavior was 5-type metabotropic glutamate receptors antagonist MTEP (3 microg). Separately injected MTEP did not influence on avoidance conditioning and free locomotor behavior. Unlike that, 1-type metabotropic glutamate receptors antagonist EMQMCM (3 microg) impaired normal locomotor behavior and did not prevent the picrotoxin effects. The NMDA glutamate receptors MK 801 (disocilpin--1 and 5 microg) impaired the picrotoxin-induced hyperkinesis, but did not to prevent the negative effects on avoidance conditioning; separately injected MK 801 reduced free locomotor activity. Based on location of investigated receptor types in neostriatal neurons membranes, we proposed that the most effective influence on 5-type metabotropic glutamate receptors is associated with their involvement in "indirect" efferent pathway, suffered in hyperkinetic extrapyramidal motor dysfunction--Huntington's chorea in human.

Cyclophosphamide Injection

MedlinePlus

... Hodgkin's disease) and non-Hodgkin's lymphoma (types of cancer that begin in a type of white blood ... cutaneous T-cell lymphoma (CTCL, a group of cancers of the immune system that first appear as ...

Telavancin Injection

MedlinePlus

... serious skin infections caused by certain types of bacteria. It is also used alone or with other ... to treat certain types of pneumonia caused by bacteria when there are no other treatment options available. ...

Injection therapy for subacute and chronic low-back pain.

PubMed

Staal, J Bart; de Bie, Rob; de Vet, Henrica Cw; Hildebrandt, Jan; Nelemans, Patty

2008-07-16

The effectiveness of injection therapy for low-back pain is still debatable. Heterogeneity of target tissue, pharmacological agent and dosage generally found in randomized controlled trials (RCTs) points to the need for clinically valid comparisons in a literature synthesis. To determine if injection therapy is more effective than placebo or other treatments for patients with subacute or chronic low-back pain. We updated the search of the earlier systematic review and searched the Cochrane Central Register of Controlled Trials, MEDLINE and EMBASE databases from January 1999 to March 2007 for relevant trials reported in English, French, German, Dutch and Nordic languages. We also screened references from trials identified. RCTs on the effects of injection therapy involving epidural, facet or local sites for subacute or chronic low-back pain were included. Studies which compared the effects of intradiscal injections, prolotherapy or Ozone therapy with other treatments, were excluded unless injection therapy with another pharmaceutical agent (no placebo treatment) was part of one of the treatment arms. Studies about injections in sacroiliac joints and studies evaluating the effects of epidural steroids for radicular pain were also excluded. Two review authors independently assessed the quality of the trials. If study data were clinically and statistically too heterogeneous to perform a meta-analysis, we used a best evidence synthesis to summarize the results. The evidence was classified into five levels (strong, moderate, limited, conflicting or no evidence), taking into account the methodological quality of the studies. 18 trials (1179 participants) were included in this updated review. The injection sites varied from epidural sites and facet joints (i.e. intra-articular injections, peri-articular injections and nerve blocks) to local sites (i.e. tender- and trigger points). The drugs that were studied consisted of corticosteroids, local anesthetics and a variety of other drugs. The methodological quality of the trials was limited with 10 out of 18 trials rated as having a high methodological quality. Statistical pooling was not possible due to clinical heterogeneity in the trials. Overall, the results indicated that there is no strong evidence for or against the use of any type of injection therapy. There is insufficient evidence to support the use of injection therapy in subacute and chronic low-back pain. However, it cannot be ruled out that specific subgroups of patients may respond to a specific type of injection therapy.

Contrast radiographic study of venous drainage of the corpus cavernosum and the corpus spongiosum of the cat penis.

PubMed

Amiri, Ali Akbar; Gilanpour, Hassan; Veshkini, Abbas

2014-01-01

The aim of this study was to determine the drainage routes of the corpus cvernosum penis and the corpus spongiosum penis in the cat using contrast cavernosography. Five male cats, 1.5-2.5 years old, weighing between 4.5 and 5.5 kg were investigated. The cats were anesthetized and the root and the proximal part of the penis were exposed by an incision on the perineum reaching the scrotum. Each cat was radiographed in lateral and dorsal recumbency before and during injection of contrast medium into the erectile bodies. The corpus spongiosum penis was injected at the bulb of the penis and the corpus cavernosum penis at the root. Injection of contrast media into the cavernous bodies showed that both the external and internal iliac veins drain the erectile bodies into the caudal vena cava. Drainage from the corpus spongiosum penis was from the bulb for the proximal part and from the glans for the distal part. The corpus cavernosum penis was drained only proximally, from the crura. There was a network of veins above the pelvic symphysis and the drainage of erectile bodies where through various routes into the internal and external iliac veins.

Studies on impact of electron cyclotron wave injection on the internal transport barriers in JT-60U weak shear plasmas

NASA Astrophysics Data System (ADS)

Ide, S.; Takenaga, H.; Isayama, A.; Sakamoto, Y.; Yoshida, M.; Gormezano, C.

2007-11-01

Impact of the electron cyclotron range of frequency wave (ECRF) on the internal transport barriers (ITBs) in a weak shear (WS) plasma has been investigated in JT-60U. The fundamental O-mode ECRF of 110 GHz injected obliquely (co-current drive) from the low field side is used. It is observed that the ion temperature (Ti) ITB in a WS plasma can be degraded by ECRF. It is clarified for the first time that the degradation depends increasingly on the EC power (PEC) but decreasingly on the plasma current (Ip). Moreover it is confirmed that ECRF affects the toroidal rotation (Vt) indirectly and results in the flattening of Vt(ρ) and therefore the radial electric field (Er) profiles regardless of the direction of the target Vt(ρ), peaking co or counter direction (relative to the Ip direction). Furthermore, it is recently found that Ti and Vt in the whole ITB region are affected with almost no delay from the EC onset even with off-axis EC deposition. These results indicate that EC injection unveiled a semi-global structure that characterizes Ti ITB in a WS plasma.

An analytical study on groundwater flow in drainage basins with horizontal wells

NASA Astrophysics Data System (ADS)

Wang, Jun-Zhi; Jiang, Xiao-Wei; Wan, Li; Wang, Xu-Sheng; Li, Hailong

2014-06-01

Analytical studies on release/capture zones are often limited to a uniform background groundwater flow. In fact, for basin-scale problems, the undulating water table would lead to the development of hierarchically nested flow systems, which are more complex than a uniform flow. Under the premise that the water table is a replica of undulating topography and hardly influenced by wells, an analytical solution of hydraulic head is derived for a two-dimensional cross section of a drainage basin with horizontal injection/pumping wells. Based on the analytical solution, distributions of hydraulic head, stagnation points and flow systems (including release/capture zones) are explored. The superposition of injection/pumping wells onto the background flow field leads to the development of new internal stagnation points and new flow systems (including release/capture zones). Generally speaking, the existence of n injection/pumping wells would result in up to n new internal stagnation points and up to 2n new flow systems (including release/capture zones). The analytical study presented, which integrates traditional well hydraulics with the theory of regional groundwater flow, is useful in understanding basin-scale groundwater flow influenced by human activities.

Spin injection in n-type resonant tunneling diodes.

PubMed

Orsi Gordo, Vanessa; Herval, Leonilson Ks; Galeti, Helder Va; Gobato, Yara Galvão; Brasil, Maria Jsp; Marques, Gilmar E; Henini, Mohamed; Airey, Robert J

2012-10-25

We have studied the polarized resolved photoluminescence of n-type GaAs/AlAs/GaAlAs resonant tunneling diodes under magnetic field parallel to the tunnel current. Under resonant tunneling conditions, we have observed two emission lines attributed to neutral (X) and negatively charged excitons (X-). We have observed a voltage-controlled circular polarization degree from the quantum well emission for both lines, with values up to -88% at 15 T at low voltages which are ascribed to an efficient spin injection from the 2D gases formed at the accumulation layers.

Cryoglobulin-induced inflammation.

PubMed

Denko, C W

1985-10-01

Inflammation of the rat footpad followed injection of cryoglobulin in crystalline form (Type I) and injection of cryoglobulin in solution (Type II). Rats deficient in essential fatty acids responded with diminished swelling which corrected to normal levels by addition of prostaglandin E1 suggesting that this reaction is prostaglandin mediated. Addition of bradykinin produced no effect. Aggregated cryoglobulin proved more inflammogenic than non-aggregated cryoglobulin. Pre-treatment with choline salicylate and colchicine reduced swelling while pre-treatment with dipyridamole increased edema following cryoglobulin inoculation. Cryoglobulin is considered to be an acute phase reactant in inflammation.

Polarized type 2 alloreactive CD4+ and CD8+ donor T cells fail to induce experimental acute graft-versus-host disease.

PubMed

Krenger, W; Snyder, K M; Byon, J C; Falzarano, G; Ferrara, J L

1995-07-15

Acute graft-vs-host disease (GVHD) is thought to be mediated by alloreactive T cells with a type 1 cytokine phenotype. To prevent the development of acute GVHD, we have successfully polarized mature donor T cells toward a type 2 cytokine phenotype ex-vivo by incubating them with murine rIL-4 in a primary MLC. Polarized type 2 T cells were then transplanted with T cell-depleted bone marrow cells into irradiated recipients across either MHC class II (bm12-->C57BL/6) or class I (bm1-->C57BL/6) barriers, and the intensity of GVHD was measured by assessment of several in vitro and in vivo parameters. The injection of polarized type 2 T cells abrogated the mitogen-induced production of IFN-gamma by splenocytes from transplanted hosts on day 13 after bone marrow transplantation (BMT). Injection of polarized type 2 T cells failed to induce secretion of the effector phase cytokine TNF-alpha by splenocytes stimulated with LPS both in vitro and in vivo, and survival of transplanted mice after i.v. injection with LPS was significantly improved. Furthermore, cell-mixing experiments revealed that polarized type 2 T cells were able to inhibit type 1 cytokine responses induced by naive T cells after BMT. These data demonstrate that both polarized CD4+ and CD8+ type 2 alloreactive donor T cells can be generated in vitro from mature T cell populations. These cells function in vivo to inhibit type 1 T cell responses, and such inhibition attenuates the systemic morbidity of GVHD after BMT across both MHC class II or class I barriers in mice.

Spin injection and detection in lateral spin valves with hybrid interfaces

NASA Astrophysics Data System (ADS)

Wang, Le; Liu, Wenyu; Ying, Hao; Chen, Luchen; Lu, Zhanjie; Han, Shuo; Chen, Shanshan; Zhao, Bing; Xu, Xiaoguang; Jiang, Yong

2018-06-01

Spin injection and detection in lateral spin valves with hybrid interfaces comprising a Co/Ag transparent contact and a Co/MgO/Ag junction (III) are investigated at room temperature in comparison with pure Co/Ag transparent contacts (I) and Co/MgO/Ag junctions (II). The measured spin-accumulation signals of a type III device are five times higher than those for type I. The extracted spin diffusion length in Ag is 180 nm for all three types of devices. The enhancement of the spin signal of the hybrid structure is mainly attributed to the increase of the interfacial spin polarization from the Co/MgO/Ag junction.

Tolerance and immunity in mice infected with herpes simplex virus: studies on the mechanism of tolerance to delayed-type hypersensitivity.

PubMed

Nash, A A; Phelan, J; Gell, P G; Wildy, P

1981-06-01

Tolerance to delayed-type hypersensitivity is produced in mice following an intravenous injection of herpes simplex virus. This form of tolerance is produced early on, following simultaneous injections of virus subcutaneously and intravenously, and is long lasting (greater than 100 days). The early tolerance mechanism is resistant to high doses of cyclophosphamide and is not transferable by serum or spleen cells taken after 7 days. However, spleen cells taken at 14 days onwards inhibit the induction of delayed hypersensitivity when transferred to normal syngeneic recipients. These cells are T lymphocytes and are specific for the herpes type used in the induction.

Tolerance and immunity in mice infected with herpes simplex virus: studies on the mechanism of tolerance to delayed-type hypersensitivity.

PubMed Central

Nash, A A; Phelan, J; Gell, P G; Wildy, P

1981-01-01

Tolerance to delayed-type hypersensitivity is produced in mice following an intravenous injection of herpes simplex virus. This form of tolerance is produced early on, following simultaneous injections of virus subcutaneously and intravenously, and is long lasting (greater than 100 days). The early tolerance mechanism is resistant to high doses of cyclophosphamide and is not transferable by serum or spleen cells taken after 7 days. However, spleen cells taken at 14 days onwards inhibit the induction of delayed hypersensitivity when transferred to normal syngeneic recipients. These cells are T lymphocytes and are specific for the herpes type used in the induction. PMID:6265348

Comparison of clinical marking and ultrasound-guided injection of Botulinum type A toxin into the masseter muscles for treating bruxism and its cosmetic effects.

PubMed

Quezada-Gaon, Natacha; Wortsman, Ximena; Peñaloza, Osvaldo; Carrasco, Juan Eduardo

2016-09-01

Botulinum toxin type A has been used for treating the hypertrophy of the masseter muscles and its cosmetic effects. Ultrasound is increasingly used in dermatology, along with the guidance of mini-invasive procedures. To evaluate the role of ultrasound for guiding the application of Botulinum A toxin in patients with cosmetic alterations due to bruxism, correlate the clinical landmarks with the ultrasound findings, and study the effect on the symptoms, cosmetics, and quality of life. Twenty individuals with bruxism and cosmetic alterations underwent an ultrasound-guided injection of Botulinum toxin type A in each masseter muscle. Clinical and ultrasound marking of the procedure was compared. Clinical and sonographic evaluation was performed at the time of injection and 3 months later. Ten normal individuals underwent ultrasound of the masseter muscles as a control group. Up to 65% of individuals showed anatomical variants of the salivary glands. The method for clinically marking the skin showed a frequently erroneous location of the anterior point (up to 40% of cases) that was proven by ultrasound to be out of the muscle. In 20% of cases, ultrasound showed that the needle should be longer to enter the muscle. After injection, most of the patients demonstrated a decrease of the symptoms and cosmetic and quality of life improvements. Ultrasound can be a potent tool for guiding the injection of Botulinum toxin into the masseter muscles. It may contribute to a more personalized procedure, better cosmetic results, and help to avoid potential complications. © 2016 Wiley Periodicals, Inc.

Tralokinumab pharmacokinetics and tolerability when administered by different subcutaneous injection methods and rates

PubMed Central

Jain, Meena; Doughty, Diane; Clawson, Corbin; Li, Xiaobai; White, Nicholas; Agoram, Balaji; van der Merwe, René

2017-01-01

Objective: Tralokinumab, administered as two 1-mL subcutaneous injections every 2 weeks, at the target dose 300 mg, has been shown to improve lung function in patients with asthma. This study evaluated the pharmacokinetic (PK) and tolerability profile of tralokinumab 300 mg when administered by different rates of subcutaneous injection, as part of a pilot investigation of new injection regimens. Methods: This phase I study randomized 60 healthy adults to receive 300 mg tralokinumab, as two 1-mL subcutaneous injections, each delivered over 10 seconds, or one 2-mL injection delivered over 10 seconds (12 mL/min), 1 minute (2 mL/min), or 12 minutes (0.167 mL/min). Results: No differences in the PK profile of tralokinumab were observed between cohorts. Immediately following injection, injection-site pain intensity (mean (SD)) was lowest following 0.167 mL/min injection (5.1 mm (8.0) via visual analog scale (VAS)) and greatest following 12 mL/min injection (41 mm (27.7) via VAS); with mean injection-site pruritus intensity low for all participants. Two types of local injection-site reactions were observed: erythema (58.3%) and hematoma/bleeding (18.3%). All treatment-emergent adverse events were mild. Conclusions: Tralokinumab 300 mg is well tolerated, with comparable PK, when administered by a single 2-mL injection at different rates of subcutaneous injection vs. two 1-mL injections. PMID:28590244

Open-label study evaluating outpatient urethral sphincter injections of onabotulinumtoxinA to treat women with urinary retention due to a primary disorder of sphincter relaxation (Fowler's syndrome).

PubMed

Panicker, Jalesh N; Seth, Jai H; Khan, Shahid; Gonzales, Gwen; Haslam, Collette; Kessler, Thomas M; Fowler, Clare J

2016-05-01

To assess the efficacy (defined as improvements in maximum urinary flow rate [Qmax ] of ≥50%, post-void residual urine volume [PVR] and scores on the International Prostate Symptom Score [IPSS] questionnaire) and safety of urethral sphincter injections of onabotulinumtoxinA in women with a primary disorder of urethral sphincter relaxation, characterised by an elevated urethral pressure profile (UPP) and specific findings at urethral sphincter electromyography (EMG), i.e. Fowler's syndrome. In this open-label pilot Institutional Review Board-approved study, 10 women with a primary disorder of urethral sphincter relaxation (elevated UPP, sphincter volume, and abnormal EMG) presenting with obstructed voiding (five) or in complete urinary retention (five) were recruited from a single tertiary referral centre. Baseline symptoms were assessed using the IPSS, and Qmax and PVR were measured. After 2% lidocaine injection, 100 U of onabotulinumtoxinA was injected into the striated urethral sphincter, divided on either side, under EMG guidance. Patients were reviewed at 1, 4 and 10 weeks after injection, and assessed using the IPSS, Qmax and PVR measurements. The UPP was repeated at week 4. The mean (range) patient age was 40 (25-65) years, and the mean symptom scores on the IPSS improved from 25.6 to 14.1, and the mean 'bother' score reduced from 6.1 to 3.5 at week 10. As compared with a baseline mean Qmax of 8.12 mL/s in the women who could void, the Qmax improved to 15.8 mL/s at week 10. Four of the five women in complete retention could void spontaneously, with a mean Qmax of 14.3 mL/s at week 10. The mean PVR decreased from 260 to 89 mL and the mean static UPP improved from 113 cmH2 O at baseline to 90 cmH2 O. No serious side-effects were reported. Three women with a history of recurrent urinary tract infections developed a urinary tract infection. There were no reports of stress urinary incontinence. Seven of the 10 women opted to return for repeat injections. This pilot study shows an improvement in patient-reported lower urinary tract symptoms, and the objective parameters of Qmax , PVR and UPP, at 10 weeks after urethral sphincter injections of onabotulinumtoxinA. No serious side-effects were reported. This treatment could represent a safe outpatient treatment for young women in retention due to a primary disorder of urethral sphincter relaxation. However, a larger study is required to confirm the findings of this pilot study. © 2015 The Authors BJU International © 2015 BJU International Published by John Wiley & Sons Ltd.

Impact of Less Invasive Treatments Including Sclerotherapy With a New Agent and Hemorrhoidopexy for Prolapsing Internal Hemorrhoids

PubMed Central

Tokunaga, Yukihiko; Sasaki, Hirokazu

2013-01-01

Conventional hemorrhoidectomy is applied for the treatment of prolapsing internal hemorrhoids. Recently, less-invasive treatments such as sclerotherapy using aluminum potassium sulphate/tannic acid (ALTA) and a procedure for prolapse and hemorrhoids (PPH) have been introduced. We compared the results of sclerotherapy with ALTA and an improved type of PPH03 with those of hemorrhoidectomy. Between January 2006 and March 2009, we performed hemorrhoidectomy in 464 patients, ALTA in 940 patients, and PPH in 148 patients with second- and third-degree internal hemorrhoids according to the Goligher's classification. The volume of ALTA injected into a hemorrhoid was 7.3 ± 2.2 (mean ± SD) mL. The duration of the operation was significantly shorter in ALTA (13 ± 2 minutes) than in hemorrhoidectomy (43 ± 5 minutes) or PPH (32 ± 12 minutes). Postoperative pain, requiring intravenous pain medications, occurred in 65 cases (14%) in hemorrhoidectomy, in 16 cases (1.7%) in ALTA, and in 1 case (0.7%) in PPH. The disappearance rates of prolapse were 100% in hemorrhoidectomy, 96% in ALTA, and 98.6% in PPH. ALTA can be performed on an outpatient basis without any severe pain or complication, and PPH is a useful alternative treatment with less pain. Less-invasive treatments are beneficial when performed with care to avoid complications. PMID:23971772

Impact of less invasive treatments including sclerotherapy with a new agent and hemorrhoidopexy for prolapsing internal hemorrhoids.

PubMed

Tokunaga, Yukihiko; Sasaki, Hirokazu

2013-01-01

Conventional hemorrhoidectomy is applied for the treatment of prolapsing internal hemorrhoids. Recently, less-invasive treatments such as sclerotherapy using aluminum potassium sulphate/tannic acid (ALTA) and a procedure for prolapse and hemorrhoids (PPH) have been introduced. We compared the results of sclerotherapy with ALTA and an improved type of PPH03 with those of hemorrhoidectomy. Between January 2006 and March 2009, we performed hemorrhoidectomy in 464 patients, ALTA in 940 patients, and PPH in 148 patients with second- and third-degree internal hemorrhoids according to the Goligher's classification. The volume of ALTA injected into a hemorrhoid was 7.3 ± 2.2 (mean ± SD) mL. The duration of the operation was significantly shorter in ALTA (13 ± 2 minutes) than in hemorrhoidectomy (43 ± 5 minutes) or PPH (32 ± 12 minutes). Postoperative pain, requiring intravenous pain medications, occurred in 65 cases (14%) in hemorrhoidectomy, in 16 cases (1.7%) in ALTA, and in 1 case (0.7%) in PPH. The disappearance rates of prolapse were 100% in hemorrhoidectomy, 96% in ALTA, and 98.6% in PPH. ALTA can be performed on an outpatient basis without any severe pain or complication, and PPH is a useful alternative treatment with less pain. Less-invasive treatments are beneficial when performed with care to avoid complications.