Problem Solving Process Research of Everyone Involved in Innovation Based on CAI Technology

NASA Astrophysics Data System (ADS)

Chen, Tao; Shao, Yunfei; Tang, Xiaowo

It is very important that non-technical department personnel especially bottom line employee serve as innovators under the requirements of everyone involved in innovation. According the view of this paper, it is feasible and necessary to build everyone involved in innovation problem solving process under Total Innovation Management (TIM) based on the Theory of Inventive Problem Solving (TRIZ). The tools under the CAI technology: How TO mode and science effects database could be very useful for all employee especially non-technical department and bottom line for innovation. The problem solving process put forward in the paper focus on non-technical department personnel especially bottom line employee for innovation.

Review and evaluation of innovative technologies for measuring diet in nutritional epidemiology.

PubMed

Illner, A-K; Freisling, H; Boeing, H; Huybrechts, I; Crispim, S P; Slimani, N

2012-08-01

The use of innovative technologies is deemed to improve dietary assessment in various research settings. However, their relative merits in nutritional epidemiological studies, which require accurate quantitative estimates of the usual intake at individual level, still need to be evaluated. To report on the inventory of available innovative technologies for dietary assessment and to critically evaluate their strengths and weaknesses as compared with the conventional methodologies (i.e. Food Frequency Questionnaires, food records, 24-hour dietary recalls) used in epidemiological studies. A list of currently available technologies was identified from English-language journals, using PubMed and Web of Science. The search criteria were principally based on the date of publication (between 1995 and 2011) and pre-defined search keywords. Six main groups of innovative technologies were identified ('Personal Digital Assistant-', 'Mobile-phone-', 'Interactive computer-', 'Web-', 'Camera- and tape-recorder-' and 'Scan- and sensor-based' technologies). Compared with the conventional food records, Personal Digital Assistant and mobile phone devices seem to improve the recording through the possibility for 'real-time' recording at eating events, but their validity to estimate individual dietary intakes was low to moderate. In 24-hour dietary recalls, there is still limited knowledge regarding the accuracy of fully automated approaches; and methodological problems, such as the inaccuracy in self-reported portion sizes might be more critical than in interview-based applications. In contrast, measurement errors in innovative web-based and in conventional paper-based Food Frequency Questionnaires are most likely similar, suggesting that the underlying methodology is unchanged by the technology. Most of the new technologies in dietary assessment were seen to have overlapping methodological features with the conventional methods predominantly used for nutritional epidemiology. Their main potential to enhance dietary assessment is through more cost- and time-effective, less laborious ways of data collection and higher subject acceptance, though their integration in epidemiological studies would need additional considerations, such as the study objectives, the target population and the financial resources available. However, even in innovative technologies, the inherent individual bias related to self-reported dietary intake will not be resolved. More research is therefore crucial to investigate the validity of innovative dietary assessment technologies.

Measuring the style of innovative thinking among engineering students

NASA Astrophysics Data System (ADS)

Passig, David; Cohen, Lizi

2014-01-01

Background: Many tools have been developed to measure the ability of workers to innovate. However, all of them are based on self-reporting questionnaires, which raises questions about their validity Purpose: The aim was to develop and validate a tool, called Ideas Generation Implementation (IGI), to objectively measure the style and potential of engineering students in generating innovative technological ideas. The cognitive framework of IGI is based on the Architectural Innovation Model (AIM). Tool description: The IGI tool was designed to measure the level of innovation in generating technological ideas and their potential to be implemented. These variables rely on the definition of innovation as 'creativity, implemented in a high degree of success'. The levels of innovative thinking are based on the AIM and consist of four levels: incremental innovation, modular innovation, architectural innovation and radical innovation. Sample: Sixty experts in technological innovation developed the tool. We checked its face validity and calculated its reliability in a pilot study (kappa = 0.73). Then, 145 undergraduate students were sampled at random from the seven Israeli universities offering engineering programs and asked to complete the questionnaire. Design and methods: We examined the construct validity of the tool by conducting a variance analysis and measuring the correlations between the innovator's style of each student, as suggested by the AIM, and the three subscale factors of creative styles (efficient, conformist and original), as suggested by the Kirton Adaptors and Innovators (KAI) questionnaire. Results: Students with a radical innovator's style inclined more than those with an incremental innovator's style towards the three creative cognitive styles. Students with an architectural innovator's style inclined moderately, but not significantly, towards the three creative styles. Conclusions: The IGI tool objectively measures innovative thinking among students, thus allowing screening of potential employees at an early stage, during their undergraduate studies. The tool was found to be reliable and valid in measuring the style and potential of technological innovation among engineering students.

Game-Like Technology Innovation Education

ERIC Educational Resources Information Center

Magnussen, Rikke

2011-01-01

This paper examines the methodological challenges and perspectives of designing game-like scenarios for the implementation of innovation processes in school science education. This paper presents a design-based research study of a game-like innovation scenario designed for technology education for Danish public school students aged 13-15. Students…

Information Technology-Based Innovation in International Marketing Education: An Exploration of Two Learning Environments

ERIC Educational Resources Information Center

Sinkovics, Rudolf R.; Haghirian, Parissa; Yu, Shasha

2009-01-01

Information technology (IT) innovations have and continue to have a significant impact on international marketing practice and customer interactions. With the marketing environment becoming increasingly dependent on technology, marketing teaching in higher education faces a challenging task of effectively leveraging technology in diverse learning…

Evaluating the enhancement and improvement of China's technology and financial services platform innovation strategy.

PubMed

Wu, Ching-Sung; Hu, Kuang-Hua; Chen, Fu-Hsiang

2016-01-01

The development of high-tech industry has been prosperous around the world in past decades, while technology and finance have already become the most significant issues in the information era. While high-tech firms are a major force behind a country's economic development, it requires a lot of money for the development process, as well as the financing difficulties for its potential problems, thus, how to evaluate and establish appropriate technology and financial services platforms innovation strategy has become one of the most critical and difficult issues. Moreover, how the chosen intertwined financial environment can be optimized in order that high-tech firms financing problems can be decided has seldom been addressed. Thus, this research aims to establish a technology and financial services platform innovation strategy improvement model, as based on the hybrid MADM model, which addresses the main causal factors and amended priorities in order to strengthen ongoing planning. A DEMATEL technique, as based on Analytic Network Process, as well as modified VIKOR, will be proposed for selecting and re-configuring the aspired technology and financial services platform. An empirical study, as based on China's technology and financial services platform innovation strategy, will be provided for verifying the effectiveness of this proposed methodology. Based on expert interviews, technology and financial services platforms innovation strategy improvement should be made in the following order: credit guarantee platform ( C )_credit rating platform ( B )_investment and finance platform ( A ).

[Globalization of acupuncture technology innovation: a quantitative analysis based on acupuncture patents in the U.S.A].

PubMed

Pan, Wei; Hu, Yuan-Jia; Wang, Yi-Tao

2011-08-01

The structure of international flow of acupuncture knowledge was explored in this article so as to promote the globalization of acupuncture technology innovation. Statistical methods were adopted to reveal geographical distribution of acupuncture patents in the U.S.A. and the influencing factors of cumulative advantage of acupuncture techniques as well as innovation value of application of acupuncture patents. Social network analysis was also utilized to establish a global innovation network of acupuncture technology. The result shows that the cumulative strength on acupuncture technology correlates with the patent retention period. The innovative value of acupuncture invention correlates with the frequency of patent citation. And the U. S. A. and Canada seize central positions in the global acupuncture information and technology delivery system.

Predicting the Probability for Faculty Adopting an Audience Response System in Higher Education

ERIC Educational Resources Information Center

Chan, Tan Fung Ivan; Borja, Marianne; Welch, Brett; Batiuk, Mary Ellen

2016-01-01

Instructional technologies can be effective tools to foster student engagement, but university faculty may be reluctant to integrate innovative and evidence-based modern learning technologies into instruction. Based on Rogers' diffusion of innovation theory, this quantitative, nonexperimental, one-shot cross-sectional survey determined what…

Technology-based innovation for independent living: policy and innovation in the United Kingdom, Scandinavia, and the United States.

PubMed

Berridge, Clara; Furseth, Peder Inge; Cuthbertson, Richard; Demello, Steven

2014-01-01

Interest in utilizing technology to help older adults remain living at home is growing; however, uptake remains low. We present a conceptual framework for understanding independent living technology innovation within health and social services. Public policy and innovation in the United States, the United Kingdom, and Scandinavia are profiled as case studies. In all profiled countries, independent living technology is more rapidly advancing than associated state policy, regulation, and payment systems. The findings from this comparative analysis reveal areas for further exploration, including policy subsystem environments in which technologies and services are regulated, as well as trends and desires of older adults and their caregivers within particular cultural contexts.

The Long and Winding Road to Innovation.

PubMed

Beyar, Rafael

2015-07-30

Medicine is developing through biomedical technology and innovations. The goal of any innovation in medicine is to improve patient care. Exponential growth in technology has led to the unprecedented growth of medical technology over the last 50 years. Clinician-scientists need to understand the complexity of the innovation process, from concept to product release, when working to bring new clinical solutions to the bedside. Hence, an overview of the innovation process is provided herein. The process involves an invention designed to solve an unmet need, followed by prototype design and optimization, animal studies, pilot and pivotal studies, and regulatory approval. The post-marketing strategy relative to funding, along with analysis of cost benefit, is a critical component for the adoption of new technologies. Examples of the road to innovation are provided, based on the experience with development of the transcatheter aortic valve. Finally, ideas are presented to contribute to the further development of this worldwide trend in innovation.

The Long and Winding Road to Innovation

PubMed Central

Beyar, Rafael

2015-01-01

Medicine is developing through biomedical technology and innovations. The goal of any innovation in medicine is to improve patient care. Exponential growth in technology has led to the unprecedented growth of medical technology over the last 50 years. Clinician-scientists need to understand the complexity of the innovation process, from concept to product release, when working to bring new clinical solutions to the bedside. Hence, an overview of the innovation process is provided herein. The process involves an invention designed to solve an unmet need, followed by prototype design and optimization, animal studies, pilot and pivotal studies, and regulatory approval. The post-marketing strategy relative to funding, along with analysis of cost benefit, is a critical component for the adoption of new technologies. Examples of the road to innovation are provided, based on the experience with development of the transcatheter aortic valve. Finally, ideas are presented to contribute to the further development of this worldwide trend in innovation. PMID:26241234

An Overview of Air-Breathing Propulsion Efforts for 2015 SBIR Phase I

NASA Technical Reports Server (NTRS)

Nguyen, Hung D.; Steele, Gynelle C.

2016-01-01

NASA's Small Business Innovation Research (SBIR) program focuses on technological innovation by investing in development of innovative concepts and technologies to help NASA mission directorates address critical research needs for Agency programs. This report highlights 24 of the innovative SBIR 2015 Phase I projects that emphasize one of NASA Glenn Research Center's six core competencies-Air-Breathing Propulsion. The technologies cover a wide spectrum of applications such as hybrid nanocomposites for efficient aerospace structures; plasma flow control for drag reduction; physics-based aeroanalysis methods for open rotor conceptual designs; vertical lift by series hybrid power; fast pressure-sensitive paint systems for production wind tunnel testing; rugged, compact, and inexpensive airborne fiber sensor interrogators based on monolithic tunable lasers; and high sensitivity semiconductor sensor skins for multi-axis surface pressure characterization. Each featured technology describes an innovation and technical objective and highlights NASA commercial and industrial applications. This report provides an opportunity for NASA engineers, researchers, and program managers to learn how NASA SBIR technologies could help their programs and projects, and lead to collaborations and partnerships between the small SBIR companies and NASA that would benefit both.

Synergy between scientific advancement and technological innovation, illustrated by a mechanism-based model characterizing sodium-glucose cotransporter-2 inhibition.

PubMed

Zhang, Liping; Ng, Chee M; List, James F; Pfister, Marc

2010-09-01

Advances in experimental medicine and technological innovation during the past century have brought tremendous progress in modern medicine and generated an ever-increasing amount of data from bench and bedside. The desire to extend scientific knowledge motivates effective data integration. Technological innovation makes this possible, which in turn accelerates the advancement in science. This mutually beneficial interaction is illustrated by the development of an expanded mechanism-based model for understanding a novel mechanism, sodium-glucose cotransporter-2 SGLT2 inhibition for potential treatment of type 2 diabetes mellitus.

Technology, Innovation, and Regional Economic Development.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Office of Technology Assessment.

In recent years state and local governments, universities, and private sector groups have become increasingly active in promoting technological innovation and technology-based business development in their local economies. These efforts have resulted in productive new forms of partnership and cooperation at all levels. While federal programs have…

Bridging Technometric Method and Innovation Process: An Initial Study

NASA Astrophysics Data System (ADS)

Rumanti, A. A.; Reynaldo, R.; Samadhi, T. M. A. A.; Wiratmadja, I. I.; Dwita, A. C.

2018-03-01

The process of innovation is one of ways utilized to increase the capability of a technology component that reflects the need of SME. Technometric method can be used to identify to what extent the level of technology advancement in a SME is, and also which technology component that needs to be maximized in order to significantly deliver an innovation. This paper serves as an early study, which lays out a conceptual framework that identifies and elaborates the principles of innovation process from a well-established innovation model by Martin with the technometric method, based on the initial background research conducted at SME Ira Silver in Jogjakarta, Indonesia.

INNOVATIVE TECHNOLOGY VERIFICATION REPORT "FIELD MEASUREMENT TECHNOLOGIES FOR TOTAL PETROLEUM HYDROCARBONS IN SOIL" DEXSIL CORPORATION PETROFLAG SYSTEM

EPA Science Inventory

The PetroFLAGTm System developed by Dexsilo Corporation (Dexsil) was demonstrated under the U.S. Environmental Protection Agency Superfund Innovative Technology Evaluation Program in June 2000 at the Navy Base Ventura County site in Port Hueneme, California. The purpose o...

An Overview of 2014 SBIR Phase 1 and Phase 2 Communications Technology and Development

NASA Technical Reports Server (NTRS)

Nguyen, Hung D.; Steele, Gynelle C.; Morris, Jessica R.

2015-01-01

NASA's Small Business Innovation Research (SBIR) program focuses on technological innovation by investing in development of innovative concepts and technologies to help NASA mission directorates address critical research needs for Agency programs. This report highlights eight of the innovative SBIR 2014 Phase I and Phase II projects that emphasize one of NASA Glenn Research Center's six core competencies-Communication Technology and Development. The technologies cover a wide spectrum of applications such as X-ray navigation, microsensor instrument for unmanned aerial vehicle airborne atmospheric measurements, 16-element graphene-based phased array antenna system, interferometric star tracker, ultralow power fast-response sensor, and integrated spacecraft navigation and communication. Each featured technology describes an innovation, technical objective, and highlights NASA commercial and industrial applications. This report provides an opportunity for NASA engineers, researchers, and program managers to learn how NASA SBIR technologies could help their programs and projects, and lead to collaborations and partnerships between the small SBIR companies and NASA that would benefit both.

What drives innovation in renewable energy technology? Evidence based on patent counts

NASA Astrophysics Data System (ADS)

McCormick, Jesse

America's future economic growth and international competitiveness depend on our capacity to innovate, particularly in emerging global markets. This paper analyzes the forces that drive innovation in one such market, renewable energy technologies, utilizing the theory of induced technological innovation. Specifically, this paper operationalizes the determinants of innovation to consist of: 1) private market forces, 2) public policy that influences price and market size, and 3) public policy that catalyzes R&D investment. Analysis is conducted using a negative binomial regression to determine which of the three foundational determinants has the greatest impact on renewable energy innovation. In so doing this paper builds off of work conducted by Johnstone et al. (2010). Innovation is measured using European Patent Office data on a panel of 24 countries spanning the period from 1978-2005. The implications of this study are straightforward; policies, not market forces, are responsible for driving innovation in renewable energy technologies. Market-oriented policies are effective for mature technologies, particularly hydro, and to a lesser extent wind and solar power. R&D-oriented policy is effective for a broader technology set. In short, the United States needs a comprehensive policy environment to support renewable energy innovation; market forces alone will not provide the pace and breadth of innovations needed. That environment can and should be strategically targeted, however, to effectively allocate scare resources.

Installed Base as a Facilitator for User-Driven Innovation: How Can User Innovation Challenge Existing Institutional Barriers?

PubMed Central

Andersen, Synnøve Thomassen; Jansen, Arild

2012-01-01

The paper addresses an ICT-based, user-driven innovation process in the health sector in rural areas in Norway. The empirical base is the introduction of a new model for psychiatric health provision. This model is supported by a technical solution based on mobile phones that is aimed to help the communication between professional health personnel and patients. This innovation was made possible through the use of standard mobile technology rather than more sophisticated systems. The users were heavily involved in the development work. Our analysis shows that by thinking simple and small-scale solutions, including to take the user's needs and premises as a point of departure rather than focusing on advanced technology, the implementation process was made possible. We show that by combining theory on information infrastructures, user-oriented system development, and innovation in a three-layered analytical framework, we can explain the interrelationship between technical, organizational, and health professional factors that made this innovation a success. PMID:23304134

e-Business Innovation: The Next Decade

NASA Astrophysics Data System (ADS)

Marca, David A.

Innovation is invention or application of technologies or theories that radically alters business and the economy. For many years, innovation and the economy have been locked in 80-year cycles, which might imply that innovation is an economic driver, and vice versa. Based on this, some forecast that innovation and the economy might decrease sharply due to several forces: a) decreasing economic growth, b) increasing demand for custom services, c) more entrepreneurial work environments, and d) urban and environmental degradation. Should such forecasts hold true, business may need to alter its offerings, operations and organization to survive. Such a scenario may also require applied e-Business innovation by combining existing internet, wireless, broadband, and video technologies. One possible result: flexible front offices integrated with efficient back offices. Such an e-Business could comprise: a) a customer-based and transaction-based organization, b) functions for adaptive offerings that anticipate need, c) highly responsive, real-time, operations having no inventory, and d) value-based front-end, and automated back-end, decision making.

Regional convergence platforms in Europe—Innovation for space through technology partnerships

NASA Astrophysics Data System (ADS)

Bütfering, Peter

2010-05-01

Upcoming European and national space exploration programs and projects require new capabilities and scientific-technological solutions, and therefore external contributions to innovation. On the other hand European core (industrial) regions are searching of partners for innovation to strengthen their regional economy. In this context the German-based company European Space Innovation AG (former Adam Alva Neil)—highly experienced in the area of convergence activities between space and other sectors—has developed the model of regional convergence platforms (named 'SpaceInnovation'). These platforms are designed to foster technology partnerships between regional companies and institutes from 'non-space' and the space sector (agencies/industry). The article reflects this regional approach and shows examples in three different directions: SpaceInnovation Saar, an benchmark convergence platform initiated by the Saarland region. SpaceInnovation Europe, an European regions network approach. European SpaceInnovation Agent, an interface approach for systematic and sustainable convergence activities.

Scaling Up: From Web-Enhanced Courses to a Web-Enhanced Curriculum

ERIC Educational Resources Information Center

Wood, Robert E.

2004-01-01

In the past decade, the most important technological innovation in higher education has been the enhancement of academic courses with Web-based information and tools. Given the success and popularity of numerous Web-based innovations, the author and two colleagues wondered whether the benefits of technology use could be scaled up from the course…

Innovative Technologies And Modern Facilities In Beekeeping

NASA Astrophysics Data System (ADS)

Gaga, V. A.; Esaulov, V. N.

2016-08-01

This article discusses the features of the application of innovative technologies in beekeeping. The authors, based on years of personal experience in beekeeping and learning experience of the best apiaries in Russia and abroad, summarized materials on the topic and offered advanced modern technology in beekeeping to apply, which was successfully tested in other apiaries.

Challenge 98: Sustaining the Work of a Regional Technology Integration Initiative

ERIC Educational Resources Information Center

Billig, Shelley H.; Sherry, Lorraine; Havelock, Bruce

2005-01-01

In this article, we offer a research-based theoretical framework for sustainability, describing the proven qualities of a project and the innovations that support its sustained existence over time. We then describe how a US Department of Education Technology Innovation Challenge grantee, working to promote technology integration in a…

INNOVATIVE TECHNOLOGY VERIFICATION REPORT "FIELD MEASUREMENT TECHNOLOGIES FOR TOTAL PETROLEUM HYDROCARBONS IN SOIL" WILKS ENTERPRISE, INC. INFRACAL TOG/TPH ANALYZER

EPA Science Inventory

The hifracal' TOG/TPH Analyzer developed by Wilks Enterprise, Inc. (Wilks), was demonstrated under the U.S. Environmental Protection Agency Superfund Innovative Technology Evaluation Program in June 2000 at the Navy Base Ventura County site in Port Hueneme, California. The pu...

INNOVATIVE TECHNOLOGY VERIFICATION REPORT "FIELD MEASUREMENT TECHNOLOGIES FOR TOTAL PETROLEUM HYDROCARBONS IN SOIL" STRATEGIC DIAGNOSTICS INC. ENSYS PETRO TEST SYSTEM

EPA Science Inventory

The EnSys Petro Test System developed by Strategic Diagnostics Inc. (SDI), was demonstrated under the U.S. Environmental Protection Agency Superfund Innovative Technology Evaluation Program in June 2000 at the Navy Base Ventura County site in Port Hueneme, California. The...

INNOVATIVE TECHNOLOGY VERIFICATION REPORT "FIELD MEASUREMENT TECHNOLOGIES FOR TOTAL PETROLEUM HYDROCARBONS IN SOIL" HORIBA INSTRUMENTS INCORPORATED OCMA-350 CONTENT ANALYZER

EPA Science Inventory

The OCMA-350 Oil Content Analyzer(OCMA-350) developed by Horiba Instruments Incorporated (Horiba), was demonstrated under the U.S. Environmental Protection Agency Superfund Innovative Technology Evaluation Program in June 2000 at the Navy Base Ventura County site in Port Huen...

The Value of Wind Technology Innovation: Implications for the U.S. Power System, Wind Industry, Electricity Consumers, and Environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mai, Trieu T; Lantz, Eric J; Mowers, Matthew

Improvements to wind technologies have, in part, led to substantial deployment of U.S. wind power in recent years. The degree to which technology innovation will continue is highly uncertain adding to uncertainties in future wind deployment. We apply electric sector modeling to estimate the potential wind deployment opportunities across a range of technology advancement projections. The suite of projections considered span a wide range of possible cost and technology innovation trajectories, including those from a recent expert elicitation of wind energy experts, a projection based on the broader literature, and one reflecting estimates based on a U.S. DOE research initiative.more » In addition, we explore how these deployment pathways may impact the electricity system, electricity consumers, the environment, and the wind-related workforce. Overall, our analysis finds that wind technology innovation can have consequential implications for future wind power development throughout the United States, impact the broader electricity system, lower electric system and consumer costs, provide potential environmental benefits, and grow the U.S. wind workforce.« less

The option to abandon: stimulating innovative groundwater remediation technologies characterized by technological uncertainty.

PubMed

Compernolle, T; Van Passel, S; Huisman, K; Kort, P

2014-10-15

Many studies on technology adoption demonstrate that uncertainty leads to a postponement of investments by integrating a wait option in the economic analysis. The aim of this study however is to demonstrate how the investment in new technologies can be stimulated by integrating an option to abandon. Furthermore, this real option analysis not only considers the ex ante decision analysis of the investment in a new technology under uncertainty, but also allows for an ex post evaluation of the investment. Based on a case study regarding the adoption of an innovative groundwater remediation strategy, it is demonstrated that when the option to abandon the innovative technology is taken into account, the decision maker decides to invest in this technology, while at the same time it determines an optimal timing to abandon the technology if its operation proves to be inefficient. To reduce uncertainty about the effectiveness of groundwater remediation technologies, samples are taken. Our analysis shows that when the initial belief in an effective innovative technology is low, it is important that these samples provide correct information in order to justify the adoption of the innovative technology. Copyright © 2014 Elsevier B.V. All rights reserved.

Innovation in dental education: The "On-the-Fly" approach to simultaneous development, implementation and evidence collection.

PubMed

de Boer, I R; Bakker, D R; Serrano, C M; Koopman, P; Wesselink, P R; Vervoorn, J M

2018-03-01

This study outlines an approach for education innovation and addresses the ambivalence between evidence-based and non-evidence-based conditions. The "on-the-fly" approach was described as involving implementation during the development of an innovation for dental education. The process of designing and implementing cutting-edge technology of the MOOG Simodont Dental Trainer (DT) whilst systematically collecting evidence illustrates the "on-the-fly" approach. Using the "on-the-fly" approach for developing, implementing and collecting evidence simultaneously in an academic environment appears feasible in serving both the professionals, users and developers and system designers. During the implementation of the new technology, growing evidence stepwise strengthened its position; therefore, showing stakeholders that evidence was used to improve the technology seemed to support and increase acceptance of the new technology. When pioneering an innovative technology in a specialty field, the development stage often precedes evidence for its effectiveness. Consciously choosing the "on-the-fly" approach clarifies to stakeholders in advance about the lack of evidence in an innovation and the need of their support to collect such evidence for improvement and in order to facilitate implementation. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Science and Technological Innovation.

ERIC Educational Resources Information Center

Braun, Ernest

1979-01-01

This article is based on a presentation at the 1979 conference of the Education Group of The Institute of Physics which was held in Cambridge, England. It discusses the interaction between science and technological innovation using a historical approach: the development of microelectronics. (HM)

The Technology Fair: A Project-Based Learning Approach for Enhancing Problem Solving Skills and Interest in Design and Technology Education

ERIC Educational Resources Information Center

Mettas, Alexandros C.; Constantinou, Constantinos C.

2008-01-01

This paper presents an innovative way in which university education can help pre-service teachers become better problem-solvers. The central idea is to use the "Technology Fair" as a means for promoting pre-service teachers pedagogical content knowledge about technological problem solving skills. This innovation is supported with results from a…

Two-stage commercial evaluation of engineering systems production projects for high-rise buildings

NASA Astrophysics Data System (ADS)

Bril, Aleksander; Kalinina, Olga; Levina, Anastasia

2018-03-01

The paper is devoted to the current and debatable problem of methodology of choosing the effective innovative enterprises for venture financing. A two-stage system of commercial innovation evaluation based on the UNIDO methodology is proposed. Engineering systems account for 25 to 40% of the cost of high-rise residential buildings. This proportion increases with the use of new construction technologies. Analysis of the construction market in Russia showed that the production of internal engineering systems elements based on innovative technologies has a growth trend. The production of simple elements is organized in small enterprises on the basis of new technologies. The most attractive for development is the use of venture financing of small innovative business. To improve the efficiency of these operations, the paper proposes a methodology for a two-stage evaluation of small business development projects. A two-stage system of commercial evaluation of innovative projects allows creating an information base for informed and coordinated decision-making on venture financing of enterprises that produce engineering systems elements for the construction business.

Developing a Questionnaire to Measure Perceived Attributes of eHealth Innovations

ERIC Educational Resources Information Center

Atkinson, Nancy L.

2007-01-01

Objectives: To design a valid and reliable questionnaire to assess perceived attributes of technology-based health education innovations. Methods: College students in 12 personal health courses reviewed a prototype eHealth intervention using a 30-item instrument based upon diffusion theory's perceived attributes of an innovation. Results:…

77 FR 32174 - Innovative Transit Workforce Development Program

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-31

... project, such as design or technological innovations, reductions in cost or time, environmental benefits... CONTACT: Betty Jackson, FTA Office of Research and Innovation, 1200 New Jersey Avenue SE., Washington, DC... selected based on the following criteria: National Applicability Statement of Need Innovation Project...

Technology-Enhanced Physics Programme for Community-Based Science Learning: Innovative Design and Programme Evaluation in a Theme Park

ERIC Educational Resources Information Center

Tho, Siew Wei; Chan, Ka Wing; Yeung, Yau Yuen

2015-01-01

In this study, a new physics education programme is specifically developed for a famous theme park in Hong Kong to provide community-based science learning to her visitors, involving her three newly constructed rides. We make innovative use of digital technologies in this programme and incorporate a rigorous evaluation of the learning…

40 CFR 1036.610 - Innovative technology credits and adjustments for reducing greenhouse gas emissions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... and the in-use emission rate without the technology. Multiply this difference by the number of engines... HEAVY-DUTY HIGHWAY ENGINES Special Compliance Provisions § 1036.610 Innovative technology credits and... judgment. We recommend that you base your credit/adjustment on A to B testing of pairs of engines/vehicles...

40 CFR 1036.610 - Innovative technology credits and adjustments for reducing greenhouse gas emissions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... and the in-use emission rate without the technology. Multiply this difference by the number of engines... HEAVY-DUTY HIGHWAY ENGINES Special Compliance Provisions § 1036.610 Innovative technology credits and... judgment. We recommend that you base your credit/adjustment on A to B testing of pairs of engines/vehicles...

40 CFR 1036.610 - Innovative technology credits and adjustments for reducing greenhouse gas emissions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... and the in-use emission rate without the technology. Multiply this difference by the number of engines... HEAVY-DUTY HIGHWAY ENGINES Special Compliance Provisions § 1036.610 Innovative technology credits and... judgment. We recommend that you base your credit/adjustment on A to B testing of pairs of engines/vehicles...

Research on collaborative innovation mechanism of green construction supply chain based on united agency

NASA Astrophysics Data System (ADS)

Zhang, Min; He, Weiyi

2018-06-01

Under the guidance of principal-agent theory and modular theory, the collaborative innovation of green technology-based companies, design contractors and project builders based on united agency will provide direction for the development of green construction supply chain in the future. After analyzing the existing independent agencies, this paper proposes the industry-university-research bilateral collaborative innovation network architecture and modularization with the innovative function of engineering design in the context of non-standard transformation interfaces, analyzes the innovation responsibility center, and gives some countermeasures and suggestions to promote the performance of bilateral cooperative innovation network.

Technology for Physics Instruction

ERIC Educational Resources Information Center

Bryan, Joel

2006-01-01

Although technological innovations have the capability to significantly change how scientific investigations are done and greatly enhance the teaching and learning of science, its use is no more effective than any other resource or innovation when researched-based effective teaching practices are not followed. This paper reviews established…

Adapting a Technology-Based Implementation Support Tool for Community Mental Health: Challenges and Lessons Learned.

PubMed

Livet, Melanie; Fixsen, Amanda

2018-01-01

With mental health services shifting to community-based settings, community mental health (CMH) organizations are under increasing pressure to deliver effective services. Despite availability of evidence-based interventions, there is a gap between effective mental health practices and the care that is routinely delivered. Bridging this gap requires availability of easily tailorable implementation support tools to assist providers in implementing evidence-based intervention with quality, thereby increasing the likelihood of achieving the desired client outcomes. This study documents the process and lessons learned from exploring the feasibility of adapting such a technology-based tool, Centervention, as the example innovation, for use in CMH settings. Mixed-methods data on core features, innovation-provider fit, and organizational capacity were collected from 44 CMH providers. Lessons learned included the need to augment delivery through technology with more personal interactions, the importance of customizing and integrating the tool with existing technologies, and the need to incorporate a number of strategies to assist with adoption and use of Centervention-like tools in CMH contexts. This study adds to the current body of literature on the adaptation process for technology-based tools and provides information that can guide additional innovations for CMH settings.

Thermoplastic Adhesives based on polyolefin and olefinic copolymers

NASA Astrophysics Data System (ADS)

Paul, Rituparna

2014-03-01

H.B. Fuller has been a leading global industrial adhesive manufacturer for over 125 years. It is a company with a rich history of consistently delivering adhesive innovations for enhancing product performance in the market place. H.B. Fuller technologies/products find application in several markets including packaging, personal hygiene and nonwovens, durable assembly and electronics. In this presentation, H. B. Fuller's technology innovation journey will be shared with emphasis on groundbreaking technologies/products based on polyolefin and olefin copolymers.

The diffusion of medical technology, local conditions, and technology re-invention: a comparative case study on coronary stenting.

PubMed

Hashimoto, Hideki; Noguchi, Haruko; Heidenreich, Paul; Saynina, Olga; Moreland, Abigail; Miyazaki, Shunichi; Ikeda, Shunya; Kaneko, Yoshihiro; Ikegami, Naoki

2006-12-01

Innovation of medical technology is a major driving force behind the increase in medical expenditures in developed countries. Previous studies identified that the diffusion of medical technology varied across countries according to the characteristics of regulatory policy and payment systems. Based on Roger's diffusion of innovation theory, this study purported to see how local practice norms, the evolving nature of diffusing technology, and local clinical needs in addition to differences in politico-economic systems would affect the process of innovation diffusion. Taking a case of coronary stenting, an innovative therapeutic technology in early 1990s, we provided a case study of hospital-based data between two teaching high-tech hospitals in Japan and the US for discussion. Stenting began to be widely used in both countries when complementary new technology modified its clinical efficacy, but the diffusion process still differed between the two hospitals due to (1) distinctive payment systems for hospitals and physicians, (2) practice norms in favor of percutaneous intervention rather than bypass surgery that was shaped by payment incentives and cultural attitudes, and (3) local patient's clinical characteristics that the technology had to be tailored for. The case study described the diffusion of stent technology as a dynamic process between patients, physicians, hospitals, health care systems, and technology under global and local conditions.

Modeling technology innovation: how science, engineering, and industry methods can combine to generate beneficial socioeconomic impacts.

PubMed

Stone, Vathsala I; Lane, Joseph P

2012-05-16

Government-sponsored science, technology, and innovation (STI) programs support the socioeconomic aspects of public policies, in addition to expanding the knowledge base. For example, beneficial healthcare services and devices are expected to result from investments in research and development (R&D) programs, which assume a causal link to commercial innovation. Such programs are increasingly held accountable for evidence of impact-that is, innovative goods and services resulting from R&D activity. However, the absence of comprehensive models and metrics skews evidence gathering toward bibliometrics about research outputs (published discoveries), with less focus on transfer metrics about development outputs (patented prototypes) and almost none on econometrics related to production outputs (commercial innovations). This disparity is particularly problematic for the expressed intent of such programs, as most measurable socioeconomic benefits result from the last category of outputs. This paper proposes a conceptual framework integrating all three knowledge-generating methods into a logic model, useful for planning, obtaining, and measuring the intended beneficial impacts through the implementation of knowledge in practice. Additionally, the integration of the Context-Input-Process-Product (CIPP) model of evaluation proactively builds relevance into STI policies and programs while sustaining rigor. The resulting logic model framework explicitly traces the progress of knowledge from inputs, following it through the three knowledge-generating processes and their respective knowledge outputs (discovery, invention, innovation), as it generates the intended socio-beneficial impacts. It is a hybrid model for generating technology-based innovations, where best practices in new product development merge with a widely accepted knowledge-translation approach. Given the emphasis on evidence-based practice in the medical and health fields and "bench to bedside" expectations for knowledge transfer, sponsors and grantees alike should find the model useful for planning, implementing, and evaluating innovation processes. High-cost/high-risk industries like healthcare require the market deployment of technology-based innovations to improve domestic society in a global economy. An appropriate balance of relevance and rigor in research, development, and production is crucial to optimize the return on public investment in such programs. The technology-innovation process needs a comprehensive operational model to effectively allocate public funds and thereby deliberately and systematically accomplish socioeconomic benefits.

Modeling technology innovation: How science, engineering, and industry methods can combine to generate beneficial socioeconomic impacts

PubMed Central

2012-01-01

Background Government-sponsored science, technology, and innovation (STI) programs support the socioeconomic aspects of public policies, in addition to expanding the knowledge base. For example, beneficial healthcare services and devices are expected to result from investments in research and development (R&D) programs, which assume a causal link to commercial innovation. Such programs are increasingly held accountable for evidence of impact—that is, innovative goods and services resulting from R&D activity. However, the absence of comprehensive models and metrics skews evidence gathering toward bibliometrics about research outputs (published discoveries), with less focus on transfer metrics about development outputs (patented prototypes) and almost none on econometrics related to production outputs (commercial innovations). This disparity is particularly problematic for the expressed intent of such programs, as most measurable socioeconomic benefits result from the last category of outputs. Methods This paper proposes a conceptual framework integrating all three knowledge-generating methods into a logic model, useful for planning, obtaining, and measuring the intended beneficial impacts through the implementation of knowledge in practice. Additionally, the integration of the Context-Input-Process-Product (CIPP) model of evaluation proactively builds relevance into STI policies and programs while sustaining rigor. Results The resulting logic model framework explicitly traces the progress of knowledge from inputs, following it through the three knowledge-generating processes and their respective knowledge outputs (discovery, invention, innovation), as it generates the intended socio-beneficial impacts. It is a hybrid model for generating technology-based innovations, where best practices in new product development merge with a widely accepted knowledge-translation approach. Given the emphasis on evidence-based practice in the medical and health fields and “bench to bedside” expectations for knowledge transfer, sponsors and grantees alike should find the model useful for planning, implementing, and evaluating innovation processes. Conclusions High-cost/high-risk industries like healthcare require the market deployment of technology-based innovations to improve domestic society in a global economy. An appropriate balance of relevance and rigor in research, development, and production is crucial to optimize the return on public investment in such programs. The technology-innovation process needs a comprehensive operational model to effectively allocate public funds and thereby deliberately and systematically accomplish socioeconomic benefits. PMID:22591638

Innovations for Federal Service: A Study of Innovative Technologies for Federal Government Services to Older Americans and Consumers. Final Report.

ERIC Educational Resources Information Center

Harris, John; And Others

This document focuses on technologies that can be used to improve federal government services. Reference Point, a foundation based in New Jersey, was chosen by the Office of Technology Assessment of the U.S. Congress to study the application of advanced information. The applications selected for the study were: Electronic Information…

Inventory of Innovative Learning Materials in Marine Science and Technology. UNESCO Reports in Marine Science 60.

ERIC Educational Resources Information Center

Richards, Adrian F.; Richards, Efrosine A.

The Inventory of Innovative Learning Materials in Marine Science and Technology includes 32 computer-, 148 video-, 16 film-, and 11 CD-ROM-based entries. They concern materials in biosciences (67), chemistry (5), geosciences (16), physics (23), technology (76) and other (20). This first, initial compilations is conceived as the basis for more…

Naval Science & Technology: Enabling the Future Force

DTIC Science & Technology

2013-04-01

corn for disruptive technologies Laser Cooling Spintronics Bz 1st U.S. Intel satellite GRAB Semiconductors GaAs, GaN, SiC GPS...Payoff • Innovative and game-changing • Approved by Corporate Board • Delivers prototype Innovative Naval Prototypes (5-10 Year) Disruptive ... Technologies Free Electron Laser Integrated Topside EM Railgun Sea Base Enablers Tactical Satellite Large Displacement UUV AACUS Directed

INNOVATIVE TECHNOLOGY VERIFICATION REPORT "FIELD MEASUREMENT TECHNOLOGIES FOR TOTAL PETROLEUM HYDROCARBONS IN SOIL" SITELAB CORPORATION SITELAB ANALYTICAL TEST KIT UVF-3100A

EPA Science Inventory

site LAB(& Analytical Test Kit UVF-3 I OOA (UVF-3 I OOA) developed by siteLABqD Corporation (siteLABa)) was demonstrated under the U.S. Environmental Protection Agency Superfund Innovative Technology Evaluation Program in June 2000 at the Navy Base Ventura County site in ...

Mobile technology in health information systems - a review.

PubMed

Zhang, X-Y; Zhang, P-Y

2016-05-01

Mobile technology is getting involved in every sphere of life including medical health care. There has been an immense upsurge in mobile phone-based health innovations these days. The expansion of mobile phone networks and the proliferation of inexpensive mobile handsets have made the digital information and communication technology capabilities very handy for the people to exploit if for any utility including health care. The mobile phone based innovations are able to transform weak and under performing health information system into more modern and efficient information system. The present review article will enlighten all these aspects of mobile technology in health care.

Energy storage deployment and innovation for the clean energy transition

NASA Astrophysics Data System (ADS)

Kittner, Noah; Lill, Felix; Kammen, Daniel M.

2017-09-01

The clean energy transition requires a co-evolution of innovation, investment, and deployment strategies for emerging energy storage technologies. A deeply decarbonized energy system research platform needs materials science advances in battery technology to overcome the intermittency challenges of wind and solar electricity. Simultaneously, policies designed to build market growth and innovation in battery storage may complement cost reductions across a suite of clean energy technologies. Further integration of R&D and deployment of new storage technologies paves a clear route toward cost-effective low-carbon electricity. Here we analyse deployment and innovation using a two-factor model that integrates the value of investment in materials innovation and technology deployment over time from an empirical dataset covering battery storage technology. Complementary advances in battery storage are of utmost importance to decarbonization alongside improvements in renewable electricity sources. We find and chart a viable path to dispatchable US$1 W-1 solar with US$100 kWh-1 battery storage that enables combinations of solar, wind, and storage to compete directly with fossil-based electricity options.

Innovations and Challenges in Project-Based STEM Education: Lessons from ITEST

ERIC Educational Resources Information Center

Connors-Kellgren, Alice; Parker, Caroline E.; Blustein, David L.; Barnett, Mike

2016-01-01

For over a decade, the National Science Foundation's Innovative Technology Experiences for Students and Teachers (ITEST) program has funded researchers and educators to build an understanding of best practices, contexts, and processes contributing to K-12 students' motivation and participation in Science, Technology, Engineering, and Mathematics…

Research Methods Tutorial

NASA Technical Reports Server (NTRS)

Aguilera, Frank J.

2015-01-01

A guiding principle for conducting research in technology, science, and engineering, leading to innovation is based on our use of research methodology (both qualitative and qualitative). A brief review of research methodology will be presented with an overview of NASA process in developing aeronautics technologies and other things to consider in research including what is innovation.

Research Methods Tutorial

NASA Technical Reports Server (NTRS)

Aguilera, Frank J.

2015-01-01

A guiding principle for conducting research in technology, science, and engineering, leading to innovation is based on our use of research methodology (both qualitative and quantitative). A brief review of research methodology will be presented with an overview of NASA process in developing aeronautics technologies and other things to consider in research including what is innovation.

Competitive intelligence information management and innovation in small technology-based companies

NASA Astrophysics Data System (ADS)

Tanev, Stoyan

2007-05-01

In this article we examine how (i) company type and (ii) the competitive intelligence information used by small technology-based companies affect their innovation performance. The focus is on the specific information types used and not on the information sources. Information topics are classified in four groups - customers (10), company (9), competitor (11) and industry (12). The sample consists of 45 small new technology-based companies, specialized suppliers, and service companies from a variety of sectors - software, photonics, telecommunications, biomedical engineering and biotech, traditional manufacturing etc. The results suggest that the total number of intelligence information topics companies use to make decisions about innovation is not associated with the number of their new products, processes, services and patents. Therefore the companies in our sample do not seem to have the resources, processes or value systems required to use different competitive intelligence information when making decisions on innovation or may rely more on their own internal logic than on external information. Companies are classified using a Pavitt-like taxonomy. Service companies are considered as a separate company type. This allows for explicitly studying both, the innovative role of new services in product driven companies, and the role of new product development in service companies.

The policy-dependent statistics and induced heterogeneity of the supported agents on the inter and intra company levels

NASA Astrophysics Data System (ADS)

Horváth, Denis; Maliková, Zuzana; Lučkaničová, Martina

2015-09-01

We present a simulation model of the technological innovations based on the former Guardiola's concept which relies on the notion of technological barriers. The central, novel feature of our proposal is the assumption that barriers can be reduced allowing public support to R&D. However, this can be applied under the different policies. The statistical treatment of the simulation results demonstrated that support of the elitist (super-threshold) innovating units yields higher innovation rate, but more profound variation of the technological levels. On the other hand, the favoring of innovators with sub-threshold technological levels may lead to the more integrated technological world. Simultaneously, we use the same model to study the effects of supporting knowledge sharing (that is to say, lowering sharing barriers) on average organizational knowledge. An interesting aspect of the model represents self-organized adjustment of the probabilistic parameters related to the social linkages.

Beyond Functionality and Technocracy: Creating Human Involvement with Educational Technology

ERIC Educational Resources Information Center

Westera, Wim

2005-01-01

Innovation of education is highly topical. It is obviously boosted by a range of new technologies, which enable new modes of learning that, are independent of time and place through Web-based delivery and computer-mediated communication. However, innovators in education often encounter intrinsic conservatism or even deliberate obstructions. For…

Changing Methods and Mindsets: Lessons from Innovate NYC

ERIC Educational Resources Information Center

Hodas, Steven

2016-01-01

As schools and classrooms explore technology-based, student-centered, personalized approaches to teaching and learning, their efforts to innovate can be hamstrung by archaic district operating systems that do not allow them to take advantage of new technologies, to work with smaller startup companies, or to quickly make and implement decisions.…

Technology Transfer and Innovation Initiatives in Strategic Management: Generating an Alternative Perspective

ERIC Educational Resources Information Center

Major, E.

2003-01-01

This paper taps the strategic management discipline to inform our understanding of technology transfer and innovation (TTI) initiatives. With special focus on the UK Foresight programme it considers the impacts that the resource-based and core competence approaches to strategy can have on understanding the nature and effectiveness of TTI…

An Empirical Investigation of Smart Board Innovations in Teaching in UAE University

ERIC Educational Resources Information Center

Al-Qirim, Nabeel

2016-01-01

This research investigates Teaching Faculty's (TF) adoption and usage of the Interactive or Smart White Board Technology (SB) in UAE University (UAEU). The developed theoretical framework is based on the technological innovation theories and is made of different socio-technical factors. Using survey research targeting UAEU's TF, the research…

Cultivating engineering innovation ability based on optoelectronic experimental platform

NASA Astrophysics Data System (ADS)

Li, Dangjuan; Wu, Shenjiang

2017-08-01

As the supporting experimental platform of the Xi'an Technological University education reform experimental class, "optical technological innovation experimental platform" integrated the design and comprehensive experiments of the optical multi-class courses. On the basis of summing up the past two years teaching experience, platform pilot projects were improve. It has played a good role by making the use of an open teaching model in the cultivating engineering innovation spirit and scientific thinking of the students.

ACCESSING FEDERAL DATA BASES FOR CONTAMINATED SITE CLEAN-UP TECHNOLOGIES

EPA Science Inventory

The Federal Remediation Technologies Roundtable (Roundtable) eveloped this publication to provide information on accessing Federal data bases that contain data on innovative remediation technologies. The Roundtable includes representatives from the Department of Defense (DoD), En...

Technology transfer from biomedical research to clinical practice: measuring innovation performance.

PubMed

Balas, E Andrew; Elkin, Peter L

2013-12-01

Studies documented 17 years of transfer time from clinical trials to practice of care. Launched in 2002, the National Institutes of Health (NIH) translational research initiative needs to develop metrics for impact assessment. A recent White House report highlighted that research and development productivity is declining as a result of increased research spending while the new drugs output is flat. The goal of this study was to develop an expanded model of research-based innovation and performance thresholds of transfer from research to practice. Models for transfer of research to practice have been collected and reviewed. Subsequently, innovation pathways have been specified based on common characteristics. An integrated, intellectual property transfer model is described. The central but often disregarded role of research innovation disclosure is highlighted. Measures of research transfer and milestones of progress have been identified based on the Association of University Technology Managers 2012 performance reports. Numeric milestones of technology transfer are recommended at threshold (top 50%), target (top 25%), and stretch goal (top 10%) performance levels. Transfer measures and corresponding target levels include research spending to disclosure (<$1.88 million), disclosure to patents (>0.81), patents to start-up (>0.1), patents to licenses (>2.25), and average per license income (>$48,000). Several limitations of measurement are described. Academic institutions should take strategic steps to bring innovation to the center of scholarly discussions. Research on research, particularly on pathways to disclosures, is needed to improve R&D productivity. Researchers should be informed about the technology transfer performance of their institution and regulations should better support innovators.

75 FR 52373 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-25

... Administration. Type of Review: NEW. Title of Collection: Evaluation of the Technology-Based Learning Grants. OMB... technology based learning. The initiative increases worker access to training while stimulating the development of innovative models and uses for technology based learning in the public workforce system. For...

Capturing, Codifying and Scoring Complex Data for Innovative, Computer-Based Items.

ERIC Educational Resources Information Center

Luecht, Richard M.

The Microsoft Certification Program (MCP) includes many new computer-based item types, based on complex cases involving the Windows 2000 (registered) operating system. This Innovative Item Technology (IIT) has presented challenges beyond traditional psychometric considerations such as capturing and storing the relevant response data from…

[The technological innovation strategy for quality control of Chinese medicine based on Big Data].

PubMed

Li, Zhen-hao; Qian, Zhong-zhi; Cheng, Yi-yu

2015-09-01

The evolution of the quality control concepts of medical products within the global context and the development of the quality control technology of Chinese medicine are briefly described. Aimed at the bottlenecks in the regulation and quality control of Chinese medicine, using Big Data technology to address the significant challenges in Chinese medicine industry is proposed. For quality standard refinements and internationalization of Chinese medicine, a technological innovation strategy encompassing its methodology, and the R&D direction of the subsequent core technology are also presented.

[Development and application of component-based Chinese medicine theory].

PubMed

Zhang, Jun-Hua; Fan, Guan-Wei; Zhang, Han; Fan, Xiao-Hui; Wang, Yi; Liu, Li-Mei; Li, Chuan; Gao, Yue; Gao, Xiu-Mei; Zhang, Bo-Li

2017-11-01

Traditional Chinese medicine (TCM) prescription is the main therapies for disease prevention and treatment in Chinese medicine. Following the guidance of the theory of TCM and developing drug by composing prescriptions of TCM materials and pieces, it is a traditional application mode of TCM, and still widely used in clinic. TCM prescription has theoretical advantages and rich clinical application experience in dealing with multi-factor complex diseases, but scientific research is relatively weak. The lack of scientific cognition of the effective substances and mechanism of Chinese medicine leads to insufficient understanding of the efficacy regularity, which affects the stability of effect and hinders the improvement of quality of Chinese medicinal products. Component-based Chinese medicine (CCM) is an innovation based on inheritance, which breaks through the tradition of experience-based prescription and realize the transformation of compatibility from herbal pieces to components. CCM is an important achievement during the research process of modernization of Chinese medicine. Under the support of three national "973" projects, in order to reveal the scientific connotation of the prescription compatibility theory and develop innovative Chinese drugs, we have launched theoretical innovation and technological innovation around the "two relatively clear", and opened up the research field of CCM. CCM is an innovation based on inheritance, breaking through the tradition of experience based prescription, and realizing the transformation from compatibility of herbal pieces to component compatibility, which is an important achievement of the modernization of traditional Chinese medicine. In the past more than 10 years, with the deepening of research and the expansion of application, the theory and methods of CCM and efficacy-oriented compatibility have been continuously improved. The value of CCM is not only in developing new drug, more important is to build a communication bridge between traditional Chinese medicine and modern science and construct the system of key technologies which meet the need of innovation and development of TCM. This paper focused on the research progress, related concepts and technology development of CCM, as well as its application prospect in the theory research of Chinese medicine, development of innovative Chinese drugs, secondary development of Chinese patent medicine and upgrading of pharmaceutical technology. Copyright© by the Chinese Pharmaceutical Association.

Middle School Mathematics Teachers' Experiences with School-Based and District-Based Support and Its Relationship to Integrating Technology

ERIC Educational Resources Information Center

Hampshire, Onequa N.

2014-01-01

Technological advances play a major role in educating students' in mathematics. Research indicates that technology could create learning environments that support innovativeness and assist teachers in developing a positive attitude toward integrating technology. Unfortunately, teachers are not utilizing technology on a regular basis in mathematics…

Ideas from Future Technologies Workshop Held by ARL/TARDEC in Aberdeen Proving Ground, Maryland on 9-11 June, 1993

DTIC Science & Technology

1994-08-01

goalie moving his stick to block a puck. The first estimates of the predicted impact point may be available around 1 s before impact, and positioning...Innovation thrives in a "technology push" environment, not in a "demand pull " siruation. • Micromanagement is lethal to innovation. • Very few...strongest of "demand pull " conditions imaginable-a management method that reduces innovation. This could be counterbalanced with a strong "Tech Base

Sustainable exposure prevention through innovative detection and remediation technologies from the NIEHS Superfund Research Program.

PubMed

Henry, Heather F; Suk, William A

2017-03-01

Innovative devices and tools for exposure assessment and remediation play an integral role in preventing exposure to hazardous substances. New solutions for detecting and remediating organic, inorganic, and mixtures of contaminants can improve public health as a means of primary prevention. Using a public health prevention model, detection and remediation technologies contribute to primary prevention as tools to identify areas of high risk (e.g. contamination hotspots), to recognize hazards (bioassay tests), and to prevent exposure through contaminant cleanups. Primary prevention success is ultimately governed by the widespread acceptance of the prevention tool. And, in like fashion, detection and remediation technologies must convey technical and sustainability advantages to be adopted for use. Hence, sustainability - economic, environmental, and societal - drives innovation in detection and remediation technology. The National Institute of Health (NIH) National Institute of Environmental Health Sciences (NIEHS) Superfund Research Program (SRP) is mandated to advance innovative detection, remediation, and toxicity screening technology development through grants to universities and small businesses. SRP recognizes the importance of fast, accurate, robust, and advanced detection technologies that allow for portable real-time, on-site characterization, monitoring, and assessment of contaminant concentration and/or toxicity. Advances in non-targeted screening, biological-based assays, passive sampling devices (PSDs), sophisticated modeling approaches, and precision-based analytical tools are making it easier to quickly identify hazardous "hotspots" and, therefore, prevent exposures. Innovation in sustainable remediation uses a variety of approaches: in situ remediation; harnessing the natural catalytic properties of biological processes (such as bioremediation and phytotechnologies); and application of novel materials science (such as nanotechnology, advanced membranes, new carbon materials, and materials reuse). Collectively, the investment in new technologies shows promise to reduce the amount and toxicity of hazardous substances in the environment. This manuscript highlights SRP funded innovative devices and tools for exposure assessment and remediation of organic, inorganic, and mixtures of contaminants with a particular focus on sustainable technologies.

Innovative quantum technologies for microgravity fundamental physics and biological research

NASA Technical Reports Server (NTRS)

Kierk, I. K.

2002-01-01

This paper presents a new technology program, within the fundamental physics, focusing on four quantum technology areas: quantum atomics, quantum optics, space superconductivity and quantum sensor technology, and quantum field based sensor and modeling technology.

The impact of innovation intermediary on knowledge transfer

NASA Astrophysics Data System (ADS)

Lin, Min; Wei, Jun

2018-07-01

Many firms have opened up their innovation process and actively transfer knowledge with external partners in the market of technology. To reduce some of the market inefficiencies, more and more firms collaborate with innovation intermediaries. In light of the increasing importance of intermediary in the context of open innovation, we in this paper systematically investigate the effect of innovation intermediary on knowledge transfer and innovation process in networked systems. We find that the existence of innovation intermediary is conducive to the knowledge diffusion and facilitate the knowledge growth at system level. Interestingly, the scale of the innovation intermediary has little effect on the growth of knowledge. We further investigate the selection of intermediary members by comparing four selection strategies: random selection, initial knowledge level based selection, absorptive capability based selection, and innovative ability based selection. It is found that the selection strategy based on innovative ability outperforms all the other strategies in promoting the system knowledge growth. Our study provides a theoretical understanding of the impact of innovation intermediary on knowledge transfer and sheds light on the design and selection of innovation intermediary in open innovation.

A project to transfer technology from NASA centers in support of industrial innovation in the midwest

NASA Technical Reports Server (NTRS)

Barr, B. G.

1986-01-01

A technology transfer program utilizing graduate students in mechanical engineering at the University of Kansas was initiated in early 1981. The objective of the program was to encourage industrial innovation in the Midwest through improved industry/university cooperation and the utilization of NASA technology. A related and important aspect of the program was the improvement of graduate engineering education through the involvement of students in the identification and accomplishment of technological objectives in cooperation with scientists at NASA centers and engineers in industry. The pilot NASA/University Industrial Innovation Program was an outstanding success based on its ability to: attract top graduate students; secure industry support; and stimulate industry/university cooperation leading to enhanced university capability and utilization of advanced technology by industry.

Computer-Aided Analysis of Patents for Product Technology Maturity Forecasting

NASA Astrophysics Data System (ADS)

Liang, Yanhong; Gan, Dequan; Guo, Yingchun; Zhang, Peng

Product technology maturity foresting is vital for any enterprises to hold the chance for innovation and keep competitive for a long term. The Theory of Invention Problem Solving (TRIZ) is acknowledged both as a systematic methodology for innovation and a powerful tool for technology forecasting. Based on TRIZ, the state -of-the-art on the technology maturity of product and the limits of application are discussed. With the application of text mining and patent analysis technologies, this paper proposes a computer-aided approach for product technology maturity forecasting. It can overcome the shortcomings of the current methods.

No Such Thing as Failure, Only Feedback: Designing Innovative Opportunities for E-Assessment and Technology-Mediated Feedback

ERIC Educational Resources Information Center

Miller, Charles; Doering, Aaron; Scharber, Cassandra

2010-01-01

In this paper we challenge designers, researchers, teachers, students, and parents to re-assess and re-envision the value of technology-mediated feedback and e-assessment by examining the innovative roles feedback and assessment played in the design of three contemporary web-based learning environments. These environments include 1) an…

Firms navigating through innovation spaces: a conceptualization of how firms search and perceive technological, market and productive opportunities globally.

PubMed

McKelvey, Maureen

2016-01-01

The main contribution of this paper is a theory-based conceptual framework of innovation spaces, and how firms must navigate through them to innovate. The concept of innovation systems - at the regional, sectoral and national levels - have been highly influential. Previous literature developing the concept of innovation systems has stressed the importance of institutions, networks and knowledge bases at the regional, sectoral and national levels. This paper primarily draws upon an evolutionary and Schumpeterian economics perspective, in the following three senses. The conceptualization of 'innnovation spaces' focuses upon how and why firm search for innovations is influenced the opportunities within certain geographical contexts. This means that the firm create opportunities and can span different context, but they are influence by the context in term of the access, flow and co-evolution of ideas, resources, technology, people and knowledge, which help stimulate business innovation in terms of products, process and services. The paper concludes with an agenda for future research and especially the need to focus on globalization as a process of intensifying linkages across the globe.

Identification of innovation in public health.

PubMed

Fung, Matthew; Simpson, Sue; Packer, Claire

2011-03-01

The National Horizon Scanning Centre provides national policy-makers in England with forewarning about emerging and new health technologies. This includes public health interventions (PHIs) but identification of these interventions is not always easy. The aim of this study was to explore the meaning and define innovation in public health. We used a quasi-Delphi method with questionnaire 1 sent to 106 public health and horizon scanning professionals and decision-makers in June 2008. Questionnaire 2 was developed based on answers to questionnaire 1 and sent to all respondents. A definition of innovative PHIs was developed: 'Innovative PHIs are generally new and different to established interventions. They should be equitable, applicable to all in a population, cost-effective and may address health determinants in the non-health sector of society. A good evidence base is ideal, but sometimes it may be necessary to consider PHIs lacking evidence'. Sources suggested for identifying innovative PHIs were similar to those used for other types of health technologies. Our findings should help early awareness and alert systems distinguish innovative from non-innovative PHIs, although its application in practice needs trialling.

Teachers from Instructors to Designers of Inquiry-Based Science, Technology, Engineering, and Mathematics Education: How Effective Inquiry-Based Science Education Implementation Can Result in Innovative Teachers and Students

ERIC Educational Resources Information Center

Filippi, Alyssa; Agarwal, Dipali

2017-01-01

There is a need for individuals in science, technology, engineering, and mathematics (STEM) careers to drive the innovation and research potential of Europe. Yet, there is expected to be a decrease in the number of STEM professionals, as there is less student interest in STEM fields of the study. Studies show that STEM classes that focus on…

K-12 Professional Learning Communities (PLCs) in a Rural School District on the High Plains of Texas: Mechanism for Teacher Support of Innovative Formative Assessment and Instruction with Technology (iFAIT)

ERIC Educational Resources Information Center

Talkmitt, Marcia Joy

2013-01-01

The purpose of this study was to explore the evolution of collaborative practices of PLCs as they emerge when using technology based formative assessment via iFAIT or innovative Formative Assessment with Instruction and Technology developed by the researcher using audience response systems and the online data compiler, Eduphoria!. This study used…

Steering vaccinomics innovations with anticipatory governance and participatory foresight.

PubMed

Ozdemir, Vural; Faraj, Samer A; Knoppers, Bartha M

2011-09-01

Vaccinomics is the convergence of vaccinology and population-based omics sciences. The success of knowledge-based innovations such as vaccinomics is not only contingent on access to new biotechnologies. It also requires new ways of governance of science, knowledge production, and management. This article presents a conceptual analysis of the anticipatory and adaptive approaches that are crucial for the responsible design and sustainable transition of vaccinomics to public health practice. Anticipatory governance is a new approach to manage the uncertainties embedded on an innovation trajectory with participatory foresight, in order to devise governance instruments for collective "steering" of science and technology. As a contrast to hitherto narrowly framed "downstream impact assessments" for emerging technologies, anticipatory governance adopts a broader and interventionist approach that recognizes the social construction of technology design and innovation. It includes in its process explicit mechanisms to understand the factors upstream to the innovation trajectory such as deliberation and cocultivation of the aims, motives, funding, design, and direction of science and technology, both by experts and publics. This upstream shift from a consumer "product uptake" focus to "participatory technology design" on the innovation trajectory is an appropriately radical and necessary departure in the field of technology assessment, especially given that considerable public funds are dedicated to innovations. Recent examples of demands by research funding agencies to anticipate the broad impacts of proposed research--at a very upstream stage at the time of research funding application--suggest that anticipatory governance with foresight may be one way how postgenomics scientific practice might transform in the future toward responsible innovation. Moreover, the present context of knowledge production in vaccinomics is such that policy making for vaccines of the 21st century is occurring in the face of uncertainties where the "facts are uncertain, values in dispute, stakes high and decisions urgent and where no single one of these dimensions can be managed in isolation from the rest." This article concludes, however, that uncertainty is not an accident of the scientific method, but its very substance. Anticipatory governance with participatory foresight offers a mechanism to respond to such inherent sociotechnical uncertainties in the emerging field of vaccinomics by making the coproduction of scientific knowledge by technology and the social systems explicit. Ultimately, this serves to integrate scientific and social knowledge thereby steering innovations to coproduce results and outputs that are socially robust and context sensitive.

Schooling, cognition and creating capacity for technological innovation in Africa

NASA Astrophysics Data System (ADS)

Eisemon, Thomas Owen

1989-09-01

This paper examines the important role of schooling in creating capacities for technological innovation in Africa. Schooling is a principal source of the modern scientific knowledge which most individuals possess. However, increasing levels of educational attainment does not necessarily increase capacities for innovation; it is what students learn in school rather than how long they attend school that is important. Policies to strengthen the impact of schooling must be based on a better understanding of how the content, language and processes of instruction influence the ways individuals think about the natural world and perform practical tasks in daily life involving use of modern health and agricultural technologies.

Innovative quantum technologies for microgravity fundamental physics and biological research

NASA Technical Reports Server (NTRS)

Kierk, I.; Israelsson, U.; Lee, M.

2001-01-01

This paper presents a new technology program, within the fundamental physics research program, focusing on four quantum technology areas: quantum atomics, quantum optics, space superconductivity and quantum sensor technology, and quantum fluid based sensor and modeling technology.

Clean energy storage technology in the making: An innovation systems perspective on flywheel energy storage.

PubMed

Wicki, Samuel; Hansen, Erik G

2017-09-20

The emergence and diffusion of green and sustainable technologies is full of obstacles and has therefore become an important area of research. We are interested in further understanding the dynamics between entrepreneurial experimentation, market formation, and institutional contexts, together playing a decisive role for successful diffusion of such technologies. Accordingly, we study these processes by adopting a technological innovation system perspective focusing on actors, networks, and institutions as well as the functions provided by them. Using a qualitative case study research design, we focus on the high-speed flywheel energy storage technology. As flywheels are based on a rotating mass allowing short-term storage of energy in kinetic form, they represent an environmentally-friendly alternative to electrochemical batteries and therefore can play an important role in sustainable energy transitions. Our contribution is threefold: First , regarding the flywheel energy storage technology, our findings reveal two subsystems and related markets in which development took different courses. In the automotive sector, flywheels are developing well as a braking energy recovery technology under the influence of two motors of innovation. In the electricity sector, they are stagnating at the stage of demonstration projects because of two important system weaknesses that counteract demand for storage. Second , we contribute to the theory of technological innovation systems by better understanding the internal dynamics between different functions of an innovation system as well as between the innovation system and its (external) contextual structures. Our third contribution is methodological. According to our best knowledge, we are the first to use system dynamics to (qualitatively) analyze and visualize dynamics between the diverse functions of innovation systems with the aim of enabling a better understanding of complex and iterative system processes. The paper also derives important implications for energy scholars, flywheel practitioners, and policymakers.

Characteristics of Well-Propagated Teaching Innovations in Undergraduate STEM

ERIC Educational Resources Information Center

Khatri, Raina; Henderson, Charles; Cole, Renee; Froyd, Jeffrey E.; Friedrichsen, Debra; Stanford, Courtney

2017-01-01

Background: The undergraduate science, technology, engineering, and mathematics (STEM) education community has developed a large number of innovative teaching strategies and materials, but the majority of these go unused by instructors. To help understand how to improve adoption of evidence-based education innovations, this study focuses on…

Thoughts on Education and Innovation

ERIC Educational Resources Information Center

Whitehead, Diane P.

2008-01-01

The word "innovate" can be traced back to the 1400s, where it originated from the Middle French word "innovacyon" meaning "renewal" or "new way of doing things." Typically, innovation is considered an activity of technology, engineering, and other specialized, scientifically based fields that employ approaches and strategies to spark connectivity,…

Innovating Teacher Education in a Complex Era

ERIC Educational Resources Information Center

Tan, Oon Seng

2015-01-01

The meteoric increase in technological advancement in the last few decades has dramatically transformed how people live their lives. Innovation is seen to be essential as it ensures sustainable growth in a knowledge-based economy and a competitive global marketplace. Consequently, enabling innovation to occur becomes of prime concern to educators…

[Nurses' Innovation Acceptance of Barcode Technology].

PubMed

Cheng, Hui-Ping; Lee, Ting-Ting; Liu, Chieh-Yu; Hou, I-Ching

2016-04-01

Healthcare organizations have increasingly adopted barcode technology to improve care quality and work efficiency. Barcode technology is simple to use, so it is frequently used in patient identification, medication administration, and specimen collection processes. This study used a technology acceptance model and innovation diffusion theory to explore the innovation acceptance of barcode technology by nurses. The data were collected using a structured questionnaire with open-ended questions that was based on the technology acceptance model and innovation diffusion theory. The questionnaire was distributed to and collected from 200 nurses from March to May 2014. Data on laboratory reporting times and specimen rejection rates were collected as well. Variables that were found to have a significant relationship (p<.001) with innovation acceptance included (in order of importance): perceived usefulness (r=.722), perceived ease of use (r=.720), observability (r=.579), compatibility (r=.364), and trialability (r=.344). N-level nurses demonstrated higher acceptance than their N1 and N2 level peers (F=3.95, p<.05). Further, the mean laboratory reporting time decreased 109 minutes (t=10.03, p<.05) and the mean specimen rejection rate decreased from 2.18% to 0.28%. The results revealed that barcode technology has been accepted by nurses and that this technology effectively decreases both laboratory reporting times and specimen rejection rates. However, network speed and workflow should be further improved in order to benefit clinical practice.

Next-Generation Performance-Based Regulation: Emphasizing Utility Performance to Unleash Power Sector Innovation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Logan, Jeffrey S; Zinaman, Owen R; Littell, David

Performance-based regulation (PBR) enables regulators to reform hundred-year-old regulatory structures to unleash innovations within 21st century power systems. An old regulatory paradigm built to ensure safe and reliable electricity at reasonable prices from capital-intensive electricity monopolies is now adjusting to a new century of disruptive technological advances that change the way utilities make money and what value customers expect from their own electricity company. Advanced technologies are driving change in power sectors around the globe. Innovative technologies are transforming the way electricity is generated, delivered, and consumed. These emerging technology drivers include renewable generation, distributed energy resources such as distributedmore » generation and energy storage, demand-side management measures such as demand-response, electric vehicles, and smart grid technologies and energy efficiency (EE). PBR enables regulators to recognize the value that electric utilities bring to customers by enabling these advanced technologies and integrating smart solutions into the utility grid and utility operations. These changes in the electric energy system and customer capacities means that there is an increasing interest in motivating regulated entities in other areas beyond traditional cost-of-service performance regulation. This report addresses best practices gleaned from more than two decades of PBR in practice, and analyzes how those best practices and lessons can be used to design innovative PBR programs. Readers looking for an introduction to PBR may want to focus on Chapters 1-5. Chapters 6 and 7 contain more detail for those interested in the intricate workings of PBR or particularly innovative PBR.« less

Endogenous technological change in medicine and its impact on healthcare costs: evidence from the pharmaceutical market in Taiwan.

PubMed

Hsieh, Chee-Ruey; Liu, Ya-Ming; Chang, Chia-Lin

2013-04-01

Although the technological change in medicine has been recognized widely as the major driver of rising healthcare costs, there is very little research that estimates this effect directly. This paper uses both a single-equation and a simultaneous equations approach to investigate empirically the interactive relationship between technological innovation and the growth of health expenditure in the context of the pharmaceutical market in Taiwan. Based on observing 182 therapeutic groups between 1997 and 2006, we find evidence to support the argument that technological innovation and health expenditure are determined simultaneously as technological innovation, and that the growth of health expenditure are endogenous rather than exogenous. Specifically, we find that therapeutic groups associated with higher pharmaceutical expenditure are likely to attract more new products to the market. Meanwhile, therapeutic groups with more new products are associated with higher pharmaceutical expenditures. An important implication of the paper is that cost containment policies will affect not only the growth of health expenditure, but also the progress of technological innovation in the health sector.

A whole-process progressive training mode to foster optoelectronic students' innovative practical ability

NASA Astrophysics Data System (ADS)

Zhong, Hairong; Xu, Wei; Hu, Haojun; Duan, Chengfang

2017-08-01

This article analyzes the features of fostering optoelectronic students' innovative practical ability based on the knowledge structure of optoelectronic disciplines, which not only reveals the common law of cultivating students' innovative practical ability, but also considers the characteristics of the major: (1) The basic theory is difficult, and the close combination of science and technology is obvious; (2)With the integration of optics, mechanics, electronics and computer, the system technology is comprehensive; (3) It has both leading-edge theory and practical applications, so the benefit of cultivating optoelectronic students is high ; (4) The equipment is precise and the practice is costly. Considering the concept and structural characteristics of innovative and practical ability, and adhering to the idea of running practice through the whole process, we put forward the construction of three-dimensional innovation and practice platform which consists of "Synthetically Teaching Laboratory + Innovation Practice Base + Scientific Research Laboratory + Major Practice Base + Joint Teaching and Training Base", and meanwhile build a whole-process progressive training mode to foster optoelectronic students' innovative practical ability, following the process of "basic experimental skills training - professional experimental skills training - system design - innovative practice - scientific research project training - expanded training - graduation project": (1) To create an in - class practical ability cultivation environment that has distinctive characteristics of the major, with the teaching laboratory as the basic platform; (2) To create an extra-curricular innovation practice activities cultivation environment that is closely linked to the practical application, with the innovation practice base as a platform for improvement; (3) To create an innovation practice training cultivation environment that leads the development of cutting-edge, with the scientific research laboratory as a platform to explore; (4) To create an out-campus expanded training environment of optoelectronic major practice and optoelectronic system teaching and training, with the major practice base as an expansion of the platform; (5) To break students' "pre-job training barriers" between school and work, with graduation design as the comprehensive training and testing link.

Innovation and technology transfer in the health sciences: a cross-sectional perspective.

PubMed

Blanch, L; Guerra, L; Lanuza, A; Palomar, G

2014-11-01

This article is based on the strategic reflection and discussion that took place on occasion of the first conference on innovation and technology transfer in the health sciences organized by the REGIC-ENS-FENIN-SEMICYUC and held in Madrid in the Instituto de Salud Carlos III on May 7th, 2013, with the aim of promoting the transfer of technological innovation in medicine and health care beyond the European program "Horizon 2020". The presentations dealt with key issues such as evaluation of the use of new technologies, the need to impregnate the decisions related to adoption and innovation with the concepts of value and sustainability, and the implication of knowledge networks in the need to strengthen their influence upon the creation of a "culture of innovation" among health professionals. But above all, emphasis was placed on the latent innovation potential of hospitals, and the fact that these, being the large companies that they are, should seriously consider that much of their future sustainability may depend on proper management of their ability to generate innovation, which is not only the generation of ideas but also their transformation into products or processes that create value and economic returns. Copyright © 2014 Elsevier España, S.L.U. and SEMICYUC. All rights reserved.

The NIHR Invention for Innovation (i4i) Programme: A Review of Progress and Contributions to Innovation in Healthcare Technologies.

PubMed

Marjanovic, Sonja; Krapels, Joachim; Sousa, Sonia; Castle-Clarke, Sophie; Horvath, Veronika; Chataway, Joanna

2015-11-30

The National Institute for Health Research (NIHR) Invention for Innovation (i4i) programme supports the development of innovative medical technologies for patient benefit. The i4i product development stream involves collaborative projects between at least two partners from academia, the NHS and industry. Medical technology innovators apply for funding for one to three years, through a peer review-based process that includes presentation to a selection panel. The funding and business advice provided by i4i support the development of early-stage innovations, generally at proof of concept and prototype stages. Since its inception the product development stream has identified and supported 170 projects, led by 146 principal investigators (PIs). RAND Europe evaluated the programme, with the aim of identifying its outputs and impacts and examining the factors influencing performance. The evaluation findings should help inform the future of the programme. The evaluation used a multi-method approach, including a focused review of background information from i4i, scoping interviews with key informants, a survey of programme participants and case studies of projects representing diverse technologies and health needs.

Lighting innovations in concept cars

NASA Astrophysics Data System (ADS)

Berlitz, Stephan; Huhn, Wolfgang

2005-02-01

Concept cars have their own styling process. Because of the big media interest they give a big opportunity to bring newest technology with styling ideas to different fairgrounds. The LED technology in the concept cars Audi Pikes Peak, Nuvolari and Le Mans will be explained. Further outlook for the Audi LED strategy starting with LED Daytime Running Lamp will be given. The close work between styling and technical engineers results in those concept cars and further technical innovations based on LED technologies.

Surrogate Final Technical Report for "Solar: A Photovoltaic Manufacturing Development Facility"

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farrar, Paul

2014-06-27

The project goal to create a first-of-a-kind crystalline Silicon (c-Si) photovoltaic (PV) Manufacturing & Technology Development Facility (MDF) that will support the growth and maturation of a strong domestic PV manufacturing industry, based on innovative and differentiated technology, by ensuring industry participants can, in a timely and cost-effective manner, access cutting-edge manufacturing equipment and production expertise needed to accelerate the transition of innovative technologies from R&D into manufacturing.

Innovative technologies and social inequalities in health: A scoping review of the literature

PubMed Central

Jensen, Magnus Rom; Solhaug, Solvor; Krokstad, Steinar

2018-01-01

The aim of this study was to systematically review the range, nature, and extent of current research activity exploring the influence of innovative health-related technologies on social inequalities in health, with specific focus on a deeper understanding of the variables used to measure this connection and the pathways leading to the (re)production of inequalities. A review process was conducted, based on scoping review techniques, searching literature published from January 1, 1996 to November 25, 2016 using MEDLINE, Scopus, and ISI web of science. Search, sorting, and data extraction processes were conducted by a team of researchers and experts using a dynamic, reflexive examination process. Of 4139 studies collected from the search process, a total of 33 were included in the final analysis. Results of this study include the classification of technologies based on how these technologies are accessed and used by end users. In addition to the factors and mechanisms that influence unequal access to technologies, the results of this study highlight the importance of variations in use that importantly shape social inequalities in health. Additionally, focus on health care services technologies must be accompanied by investigating emerging technologies influencing healthy lifestyle, genomics, and personalized devices in health. Findings also suggest that choosing one measure of social position over another has important implications for the interpretation of research results. Furthermore, understanding the pathways through which various innovative health technologies reduce or (re)produce social inequalities in health is context dependent. In order to better understand social inequalities in health, these contextual variations draw attention to the need for critical distinctions between technologies based on how these various technologies are accessed and used. The results of this study provide a comprehensive starting point for future research to further investigate how innovative technologies may influence the unequal distribution of health as a human right. PMID:29614114

Innovative technologies and social inequalities in health: A scoping review of the literature.

PubMed

Weiss, Daniel; Rydland, Håvard T; Øversveen, Emil; Jensen, Magnus Rom; Solhaug, Solvor; Krokstad, Steinar

2018-01-01

The aim of this study was to systematically review the range, nature, and extent of current research activity exploring the influence of innovative health-related technologies on social inequalities in health, with specific focus on a deeper understanding of the variables used to measure this connection and the pathways leading to the (re)production of inequalities. A review process was conducted, based on scoping review techniques, searching literature published from January 1, 1996 to November 25, 2016 using MEDLINE, Scopus, and ISI web of science. Search, sorting, and data extraction processes were conducted by a team of researchers and experts using a dynamic, reflexive examination process. Of 4139 studies collected from the search process, a total of 33 were included in the final analysis. Results of this study include the classification of technologies based on how these technologies are accessed and used by end users. In addition to the factors and mechanisms that influence unequal access to technologies, the results of this study highlight the importance of variations in use that importantly shape social inequalities in health. Additionally, focus on health care services technologies must be accompanied by investigating emerging technologies influencing healthy lifestyle, genomics, and personalized devices in health. Findings also suggest that choosing one measure of social position over another has important implications for the interpretation of research results. Furthermore, understanding the pathways through which various innovative health technologies reduce or (re)produce social inequalities in health is context dependent. In order to better understand social inequalities in health, these contextual variations draw attention to the need for critical distinctions between technologies based on how these various technologies are accessed and used. The results of this study provide a comprehensive starting point for future research to further investigate how innovative technologies may influence the unequal distribution of health as a human right.

Nursing education innovation: using e-learning technology to meet learners' needs.

PubMed

Wahl, Stacy E; Latayan, Monica B

2011-11-01

Globalization, rapid advances in health care and research, and evidence-based practice challenge organizations to meet the continuing education needs of their professional staff while functioning within the confines of economic cutbacks. This column describes an innovative way technology was used to offer asynchronous learning to all members of one organization's nursing staff. Copyright 2011, SLACK Incorporated.

Using Augmented Reality in Early Art Education: A Case Study in Hong Kong Kindergarten

ERIC Educational Resources Information Center

Huang, Yujia; Li, Hui; Fong, Ricci

2016-01-01

Innovation in pedagogy by technology integration in kindergarten classroom has always been a challenge for most teachers. This design-based research aimed to explore the feasibility of using Augmented Reality (AR) technology in early art education with a focus on the gains and pains of this innovation. A case study was conducted in a typical…

A New Model of Educational Innovation: Exploring the Nexus of Organizational Learning, Distributed Leadership, and Digital Technologies

ERIC Educational Resources Information Center

Rikkerink, Marleen; Verbeeten, Henk; Simons, Robert-Jan; Ritzen, Henk

2016-01-01

This study presents the development process of a new model of educational innovation, that involves the use of digital technologies. The model is based on a broad theoretical framework together with research involving this long-term case study. The backbone of the model consists of a fundamental revision of a multi-level Organizational Learning…

Analysis of the development and diffusion of technological innovations in oil spill forecasting: The MEDESS-4MS case

NASA Astrophysics Data System (ADS)

Marcati, Alberto; Prete, M. Irene; Mileti, Antonio; Cortese, Mario; Zodiatis, George; Karaolia, Andria; Gauci, Adam; Drago, Aldo

2016-11-01

This paper presents a case study on the management of users' engagement in the development of a new technology. Based on the experience of MEDESS-4MS, an integrated operational model for oil spill Decision Support System covering the whole Mediterranean Sea, the case study is aimed at the development of a framework for user engagement and for the management of its dual logic. Indeed, users may play a dual role in the innovation process, contributing to both the design of the innovation and its promotion. Users contribute to shaping the innovation, by aggregating and integrating knowledge, and they facilitate its diffusion, by adopting the innovation and fostering its adoption within the socio-economic system.

An innovative approach to capability-based emergency operations planning

PubMed Central

Keim, Mark E

2013-01-01

This paper describes the innovative use information technology for assisting disaster planners with an easily-accessible method for writing and improving evidence-based emergency operations plans. This process is used to identify all key objectives of the emergency response according to capabilities of the institution, community or society. The approach then uses a standardized, objective-based format, along with a consensus-based method for drafting capability-based operational-level plans. This information is then integrated within a relational database to allow for ease of access and enhanced functionality to search, sort and filter and emergency operations plan according to user need and technological capacity. This integrated approach is offered as an effective option for integrating best practices of planning with the efficiency, scalability and flexibility of modern information and communication technology. PMID:28228987

An innovative approach to capability-based emergency operations planning.

PubMed

Keim, Mark E

2013-01-01

This paper describes the innovative use information technology for assisting disaster planners with an easily-accessible method for writing and improving evidence-based emergency operations plans. This process is used to identify all key objectives of the emergency response according to capabilities of the institution, community or society. The approach then uses a standardized, objective-based format, along with a consensus-based method for drafting capability-based operational-level plans. This information is then integrated within a relational database to allow for ease of access and enhanced functionality to search, sort and filter and emergency operations plan according to user need and technological capacity. This integrated approach is offered as an effective option for integrating best practices of planning with the efficiency, scalability and flexibility of modern information and communication technology.

Absorptive capacity, technological innovation, and product life cycle: a system dynamics model.

PubMed

Zou, Bo; Guo, Feng; Guo, Jinyu

2016-01-01

While past research has recognized the importance of the dynamic nature of absorptive capacity, there is limited knowledge on how to generate a fair and comprehensive analytical framework. Based on interviews with 24 Chinese firms, this study develops a system-dynamics model that incorporates an important feedback loop among absorptive capacity, technological innovation, and product life cycle (PLC). The simulation results reveal that (1) PLC affects the dynamic process of absorptive capacity; (2) the absorptive capacity of a firm peaks in the growth stage of PLC, and (3) the market demand at different PLC stages is the main driving force in firms' technological innovations. This study also explores a sensitivity simulation using the variables of (1) time spent in founding an external knowledge network, (2) research and development period, and (3) knowledge diversity. The sensitivity simulation results show that the changes of these three variables have a greater impact on absorptive capacity and technological innovation during growth and maturity stages than in the introduction and declining stages of PLC. We provide suggestions on how firms can adjust management policies to improve their absorptive capacity and technological innovation performance during different PLC stages.

The Impact of Postgraduate Health Technology Innovation Training: Outcomes of the Stanford Biodesign Fellowship.

PubMed

Wall, James; Hellman, Eva; Denend, Lyn; Rait, Douglas; Venook, Ross; Lucian, Linda; Azagury, Dan; Yock, Paul G; Brinton, Todd J

2017-05-01

Stanford Biodesign launched its Innovation Fellowship in 2001 as a first-of-its kind postgraduate training experience for teaching biomedical technology innovators a need-driven process for developing medical technologies and delivering them to patients. Since then, many design-oriented educational programs have been initiated, yet the impact of this type of training remains poorly understood. This study measures the career focus, leadership trajectory, and productivity of 114 Biodesign Innovation Fellowship alumni based on survey data and public career information. It also compares alumni on certain publicly available metrics to finalists interviewed but not selected. Overall, 60% of alumni are employed in health technology in contrast to 35% of finalists interviewed but not selected. On leadership, 72% of alumni hold managerial or higher positions compared to 48% of the finalist group. A total of 67% of alumni reported that the fellowship had been "extremely beneficial" on their careers. As a measure of technology translation, more than 440,000 patients have been reached with technologies developed directly out of the Biodesign Innovation Fellowship, with another 1,000,000+ aided by solutions initiated by alumni after their training. This study suggests a positive impact of the fellowship program on the career focus, leadership, and productivity of its alumni.

Innovation strategy management survey of the Chilean biomedical industry. Assessment of windows of opportunities to reduce technological gaps.

PubMed

Bas, Tomas Gabriel; Oliu, Carolina Alejandra

2018-04-01

The convergence of different theories (ie, catch-up effect and windows of opportunities) allows for the interpretation of different "technological innovation gaps" in Chile's biomedical industry. It is common knowledge that Chile has always had an economy almost exclusively based on services, commodities, and mainly in the exploitation of natural resources with low value added. The literature confirms that countries that concentrate their economies on the knowledge, research, development, and commercialization of technology and innovation have a better and more stable growth rate in the medium and long run. The "Asian Tigers" are a good example of this. Analyzing the technological gaps that affect the Chilean biomedical industry, it is possible to find windows of opportunities to catch up. This could allow the country to take its knowledge, skills, and capabilities further, thus enabling Chile to not just depend on its unpredictable natural resources. For the first time, a quantitative diagnosis of the Chilean biomedical industry was made. This study considered the Chilean biomedical industry and its innovation and entrepreneurship environment, taking into account its productive capacities and its potential to make progress in technological innovation and, as a result, dramatically reducing technological gaps through windows of opportunities. Copyright © 2018 John Wiley & Sons, Ltd.

Horizon Mission Methodology - A tool for the study of technology innovation and new paradigms

NASA Technical Reports Server (NTRS)

Anderson, John L.

1993-01-01

The Horizon Mission (HM) methodology was developed to provide a means of identifying and evaluating highly innovative, breakthrough technology concepts (BTCs) and for assessing their potential impact on advanced space missions. The methodology is based on identifying new capabilities needed by hypothetical 'horizon' space missions having performance requirements that cannot be met even by extrapolating known space technologies. Normal human evaluation of new ideas such as BTCs appears to be governed (and limited) by 'inner models of reality' defined as paradigms. Thus, new ideas are evaluated by old models. This paper describes the use of the HM Methodology to define possible future paradigms that would provide alternatives to evaluation by current paradigms. The approach is to represent a future paradigm by a set of new BTC-based capabilities - called a paradigm abstract. The paper describes methods of constructing and using the abstracts for evaluating BTCs for space applications and for exploring the concept of paradigms and paradigm shifts as a representation of technology innovation.

NASA Game Changing Development Program Manufacturing Innovation Project

NASA Technical Reports Server (NTRS)

Tolbert, Carol; Vickers, John

2011-01-01

This presentation examines the new NASA Manufacturing Innovation Project. The project is a part of the Game Changing Development Program which is one element of the Space Technology Programs Managed by Office of the Chief Technologist. The project includes innovative technologies in model-based manufacturing, digital additive manufacturing, and other next generation manufacturing tools. The project is also coupled with the larger federal initiatives in this area including the National Digital Engineering and Manufacturing Initiative and the Advanced Manufacturing Partnership. In addition to NASA, other interagency partners include the Department of Defense, Department of Commerce, NIST, Department of Energy, and the National Science Foundation. The development of game-changing manufacturing technologies are critical for NASA s mission of exploration, strengthening America s manufacturing competitiveness, and are highly related to current challenges in defense manufacturing activities. There is strong consensus across industry, academia, and government that the future competitiveness of U.S. industry will be determined, in large part, by a technologically advanced manufacturing sector. This presentation highlights the prospectus of next generation manufacturing technologies to the challenges faced NASA and by the Department of Defense. The project focuses on maturing innovative/high payoff model-based manufacturing technologies that may lead to entirely new approaches for a broad array of future NASA missions and solutions to significant national needs. Digital manufacturing and computer-integrated manufacturing "virtually" guarantee advantages in quality, speed, and cost and offer many long-term benefits across the entire product lifecycle. This paper addresses key enablers and emerging strategies in areas such as: Current government initiatives, Model-based manufacturing, and Additive manufacturing.

40 CFR 35.2032 - Innovative and alternative technologies.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 1 2014-07-01 2014-07-01 false Innovative and alternative technologies... Innovative and alternative technologies. (a) Funding for innovative and alternative technologies. Projects or... innovative or alternative technology shall receive increased grants under § 35.2152. (1) Only funds from the...

40 CFR 35.2032 - Innovative and alternative technologies.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 1 2013-07-01 2013-07-01 false Innovative and alternative technologies... Innovative and alternative technologies. (a) Funding for innovative and alternative technologies. Projects or... innovative or alternative technology shall receive increased grants under § 35.2152. (1) Only funds from the...

40 CFR 35.2032 - Innovative and alternative technologies.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 1 2012-07-01 2012-07-01 false Innovative and alternative technologies... Innovative and alternative technologies. (a) Funding for innovative and alternative technologies. Projects or... innovative or alternative technology shall receive increased grants under § 35.2152. (1) Only funds from the...

40 CFR 35.2032 - Innovative and alternative technologies.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Innovative and alternative technologies... Innovative and alternative technologies. (a) Funding for innovative and alternative technologies. Projects or... innovative or alternative technology shall receive increased grants under § 35.2152. (1) Only funds from the...

40 CFR 35.2032 - Innovative and alternative technologies.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Innovative and alternative technologies... Innovative and alternative technologies. (a) Funding for innovative and alternative technologies. Projects or... innovative or alternative technology shall receive increased grants under § 35.2152. (1) Only funds from the...

FlySec: a risk-based airport security management system based on security as a service concept

NASA Astrophysics Data System (ADS)

Kyriazanos, Dimitris M.; Segou, Olga E.; Zalonis, Andreas; Thomopoulos, Stelios C. A.

2016-05-01

Complementing the ACI/IATA efforts, the FLYSEC European H2020 Research and Innovation project (http://www.fly-sec.eu/) aims to develop and demonstrate an innovative, integrated and end-to-end airport security process for passengers, enabling a guided and streamlined procedure from the landside to airside and into the boarding gates, and offering for an operationally validated innovative concept for end-to-end aviation security. FLYSEC ambition turns through a well-structured work plan into: (i) innovative processes facilitating risk-based screening; (ii) deployment and integration of new technologies and repurposing existing solutions towards a risk-based Security paradigm shift; (iii) improvement of passenger facilitation and customer service, bringing security as a real service in the airport of tomorrow;(iv) achievement of measurable throughput improvement and a whole new level of Quality of Service; and (v) validation of the results through advanced "in-vitro" simulation and "in-vivo" pilots. On the technical side, FLYSEC achieves its ambitious goals by integrating new technologies on video surveillance, intelligent remote image processing and biometrics combined with big data analysis, open-source intelligence and crowdsourcing. Repurposing existing technologies is also in the FLYSEC objectives, such as mobile application technologies for improved passenger experience and positive boarding applications (i.e. services to facilitate boarding and landside/airside way finding) as well as RFID for carry-on luggage tracking and quick unattended luggage handling. In this paper, the authors will describe the risk based airport security management system which powers FLYSEC intelligence and serves as the backend on top of which FLYSEC's front end technologies reside for security services management, behaviour and risk analysis.

ICT-Based Learning Personalization Affordance in the Context of Implementation of Constructionist Learning Activities

ERIC Educational Resources Information Center

Ignatova, Natalija; Dagiene, Valentina; Kubilinskiene, Svetlana

2015-01-01

How to enable students to create a personalized learning environment? What are the criteria of evaluation of the ICT-based learning process personalization affordance? These questions are answered by conducting multiple case study research of the innovative ICT-based learning process in iTEC (Innovative Technologies for Engaging Classrooms)…

Propagation from the Start: The Spread of a Concept-Based Instructional Tool

ERIC Educational Resources Information Center

Friedrichsen, Debra M.; Smith, Christina; Koretsky, Milo D.

2017-01-01

We describe the propagation of a technology-based educational innovation through its first 3 years of public use. The innovation studied is the Concept Warehouse (CW), a database-driven website developed to support the use of concept-based pedagogies. This tool was initially developed for instructors in undergraduate chemical engineering courses,…

76 FR 76388 - National Medal of Technology and Innovation Nomination Application

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-07

... Medal of Technology and Innovation is the highest honor for technological achievement bestowed by the... commercialization of technology products, processes and concepts, technological innovation, and development of the Nation's technological manpower. The purpose of the National Medal of Technology and Innovation is to...

Innovative technology-based interventions for autism spectrum disorders: a meta-analysis.

PubMed

Grynszpan, Ouriel; Weiss, Patrice L Tamar; Perez-Diaz, Fernando; Gal, Eynat

2014-05-01

This article reports the results of a meta-analysis of technology-based intervention studies for children with autism spectrum disorders. We conducted a systematic review of research that used a pre-post design to assess innovative technology interventions, including computer programs, virtual reality, and robotics. The selected studies provided interventions via a desktop computer, interactive DVD, shared active surface, and virtual reality. None employed robotics. The results provide evidence for the overall effectiveness of technology-based training. The overall mean effect size for posttests of controlled studies of children with autism spectrum disorders who received technology-based interventions was significantly different from zero and approached the medium magnitude, d = 0.47 (confidence interval: 0.08-0.86). The influence of age and IQ was not significant. Differences in training procedures are discussed in the light of the negative correlation that was found between the intervention durations and the studies' effect sizes. The results of this meta-analysis provide support for the continuing development, evaluation, and clinical usage of technology-based intervention for individuals with autism spectrum disorders.

The Experience of Implementation of Innovative Technology of Quarry Waste Water Purifying in Kuzbass Open Pit

NASA Astrophysics Data System (ADS)

Lesin, Yu V.; Hellmer, M. C.

2016-08-01

Among all industries in Kuzbass (Western Siberia, Russia) the coal industry provides the most environmental threat. However, the construction of new and maintenance of existing open pit mines do not often correspond to the tasks of improving the environmental safety of surface mining. So the article describes the use of innovative quarry waste water purifying technology implemented in Kuzbass open pit mine «Shestaki». This technology is based on using artificial filter arrays made of overburden rock.

Innovative technologies of waste recycling with production of high performance products

NASA Astrophysics Data System (ADS)

Gilmanshin, R.; Ferenets, A. V.; Azimov, Yu I.; Galeeva, A. I.; Gilmanshina, S. I.

2015-06-01

The innovative ways of recycling wastes as a tool for sustainable development are presented in the article. The technology of the production of a composite material based on the rubber fiber composite waste tire industry is presented. The results of experimental use of the products in the real conditions. The comparative characteristics of the composite material rubber fiber composite are given. The production technology of construction and repairing materials on the basis of foamed glass is presented.

Tool-Mediated Authentic Learning in an Educational Technology Course: A Designed-Based Innovation

ERIC Educational Resources Information Center

Amory, Alan

2014-01-01

This design-based research project is concerned with the design, development and deployment of interactive technological learning environments to support contemporary education. The use of technologies in education often replicates instructivist positions and practices. However, the use of Cultural Historical Activity Theory (C), authentic…

Site Remediation Technology InfoBase: A Guide to Federal Programs, Information Resources, and Publications on Contaminated Site Cleanup Technologies. First Edition

NASA Technical Reports Server (NTRS)

1998-01-01

Table of Contents: Federal Cleanup Programs; Federal Site Remediation Technology Development Assistance Programs; Federal Site Remediation Technology Development Electronic Data Bases; Federal Electronic Resources for Site Remediation Technology Information; Other Electronic Resources for Site Remediation Technology Information; Other Electronic Resources for Site Remediation Technology Information; Selected Bibliography: Federal Publication on Alternative and Innovative Site Remediation; and Appendix: Technology Program Contacts.

The Internet of Things for basic nursing care-A scoping review.

PubMed

Mieronkoski, Riitta; Azimi, Iman; Rahmani, Amir M; Aantaa, Riku; Terävä, Virpi; Liljeberg, Pasi; Salanterä, Sanna

2017-04-01

The novel technology of the Internet of Things (IoT) connects objects to the Internet and its most advanced applications refine obtained data for the user. We propose that Internet of Things technology can be used to promote basic nursing care in the hospital environment by improving the quality of care and patient safety. To introduce the concept of Internet of Things to nursing audience by exploring the state of the art of Internet of Things based technology for basic nursing care in the hospital environment. Scoping review methodology following Arksey & O'Malley's stages from one to five were used to explore the extent, range, and nature of current literature. We searched eight databases using predefined search terms. A total of 5030 retrievals were found which were screened for duplications and relevancy to the study topic. 265 papers were chosen for closer screening of the abstracts and 93 for full text evaluation. 62 papers were selected for the review. The constructs of the papers, the Internet of Things based innovations and the themes of basic nursing care in hospital environment were identified. Most of the papers included in the review were peer-reviewed proceedings of technological conferences or articles published in technological journals. The Internet of Things based innovations were presented in methodology papers or tested in case studies and usability assessments. Innovations were identified in several topics in four basic nursing care activities: comprehensive assessment, periodical clinical reassessment, activities of daily living and care management. Internet of Things technology is providing innovations for the use of basic nursing care although the innovations are emerging and still in early stages. Internet of things is yet vaguely adopted in nursing. The possibilities of the Internet of Things are not yet exploited as well as they could. Nursing science might benefit from deeper involvement in engineering research in the area of health. Copyright © 2017 Elsevier Ltd. All rights reserved.

The accelerated site technology deployment program presents the segmented gate system

DOE Office of Scientific and Technical Information (OSTI.GOV)

PATTESON,RAYMOND; MAYNOR,DOUG; CALLAN,CONNIE

2000-02-24

The Department of Energy (DOE) is working to accelerate the acceptance and application of innovative technologies that improve the way the nation manages its environmental remediation problems. The DOE Office of Science and Technology established the Accelerated Site Technology Deployment Program (ASTD) to help accelerate the acceptance and implementation of new and innovative soil and ground water remediation technologies. Coordinated by the Department of Energy's Idaho Office, the ASTD Program reduces many of the classic barriers to the deployment of new technologies by involving government, industry, and regulatory agencies in the assessment, implementation, and validation of innovative technologies. The papermore » uses the example of the Segmented Gate System (SGS) to illustrate how the ASTD program works. The SGS was used to cost effectively separate clean and contaminated soil for four different radionuclides: plutonium, uranium, thorium, and cesium. Based on those results, it has been proposed to use the SGS at seven other DOE sites across the country.« less

Innovative Alternative Technologies to Extract Carotenoids from Microalgae and Seaweeds

PubMed Central

Poojary, Mahesha M.; Barba, Francisco J.; Aliakbarian, Bahar; Donsì, Francesco; Pataro, Gianpiero; Dias, Daniel A.; Juliano, Pablo

2016-01-01

Marine microalgae and seaweeds (microalgae) represent a sustainable source of various bioactive natural carotenoids, including β-carotene, lutein, astaxanthin, zeaxanthin, violaxanthin and fucoxanthin. Recently, the large-scale production of carotenoids from algal sources has gained significant interest with respect to commercial and industrial applications for health, nutrition, and cosmetic applications. Although conventional processing technologies, based on solvent extraction, offer a simple approach to isolating carotenoids, they suffer several, inherent limitations, including low efficiency (extraction yield), selectivity (purity), high solvent consumption, and long treatment times, which have led to advancements in the search for innovative extraction technologies. This comprehensive review summarizes the recent trends in the extraction of carotenoids from microalgae and seaweeds through the assistance of different innovative techniques, such as pulsed electric fields, liquid pressurization, supercritical fluids, subcritical fluids, microwaves, ultrasounds, and high-pressure homogenization. In particular, the review critically analyzes technologies, characteristics, advantages, and shortcomings of the different innovative processes, highlighting the differences in terms of yield, selectivity, and economic and environmental sustainability. PMID:27879659

Innovative Alternative Technologies to Extract Carotenoids from Microalgae and Seaweeds.

PubMed

Poojary, Mahesha M; Barba, Francisco J; Aliakbarian, Bahar; Donsì, Francesco; Pataro, Gianpiero; Dias, Daniel A; Juliano, Pablo

2016-11-22

Marine microalgae and seaweeds (microalgae) represent a sustainable source of various bioactive natural carotenoids, including β-carotene, lutein, astaxanthin, zeaxanthin, violaxanthin and fucoxanthin. Recently, the large-scale production of carotenoids from algal sources has gained significant interest with respect to commercial and industrial applications for health, nutrition, and cosmetic applications. Although conventional processing technologies, based on solvent extraction, offer a simple approach to isolating carotenoids, they suffer several, inherent limitations, including low efficiency (extraction yield), selectivity (purity), high solvent consumption, and long treatment times, which have led to advancements in the search for innovative extraction technologies. This comprehensive review summarizes the recent trends in the extraction of carotenoids from microalgae and seaweeds through the assistance of different innovative techniques, such as pulsed electric fields, liquid pressurization, supercritical fluids, subcritical fluids, microwaves, ultrasounds, and high-pressure homogenization. In particular, the review critically analyzes technologies, characteristics, advantages, and shortcomings of the different innovative processes, highlighting the differences in terms of yield, selectivity, and economic and environmental sustainability.

Economic barriers to implementation of innovations in health care: is the long run-short run efficiency discrepancy a paradox?

PubMed

Adang, Eddy M M; Wensing, Michel

2008-12-01

Favourable cost-effectiveness of innovative technologies is more and more a necessary condition for implementation in clinical practice. But proven cost-effectiveness itself does not guarantee successful implementation. The reason for this is a potential discrepancy between long run efficiency, on which cost-effectiveness is based, and short run efficiency. Long run and short run efficiency is dependent upon economies of scale. This paper addresses the potential discrepancy between long run and short run efficiency of innovative technologies in healthcare, explores diseconomies of scale in Dutch hospitals and suggests what strategies might help to overcome hurdles to implement innovations due to that discrepancy.

Research progress on the brewing techniques of new-type rice wine.

PubMed

Jiao, Aiquan; Xu, Xueming; Jin, Zhengyu

2017-01-15

As a traditional alcoholic beverage, Chinese rice wine (CRW) with high nutritional value and unique flavor has been popular in China for thousands of years. Although traditional production methods had been used without change for centuries, numerous technological innovations in the last decades have greatly impacted on the CRW industry. However, reviews related to the technology research progress in this field are relatively few. This article aimed at providing a brief summary of the recent developments in the new brewing technologies for making CRW. Based on the comparison between the conventional methods and the innovative technologies of CRW brewing, three principal aspects were summarized and sorted, including the innovation of raw material pretreatment, the optimization of fermentation and the reform of sterilization technology. Furthermore, by comparing the advantages and disadvantages of these methods, various issues are addressed related to the prospect of the CRW industry. Copyright © 2016 Elsevier Ltd. All rights reserved.

Refueling the U.S. Innovation Economy: Fresh Approaches to Science, Technology, Engineering and Mathematics (STEM) Education. Executive Summary

ERIC Educational Resources Information Center

Atkinson, Robert; Mayo, Merrilea

2010-01-01

Innovation has powered America's economy, creating good jobs and a high standard of living. Yet, the U.S. share of innovation-based industries is in decline, jeopardizing our status as the world's innovation leader. And one reason is that the United States has been unable to produce enough of its own workers with sufficient skills in science,…

American export control, technology spillover and innovation of Chinese pharmaceutical Industry.

PubMed

Hui, Jiang

2017-05-01

This paper was aimed to analyze whether the U.S. strict export control to China affects the technological innovation of Chinese pharmaceutical industry. This paper selected the data of technological innovation and the expenditure of high and new technology adoption in China's pharmaceutical industry from 1995 to 2014, created panel regression model to study the impact of export controls on technology spillovers and the impact of technology spillovers on innovation capacity. The results show that US export control has a significant impact on technology spillovers, but foreign technology spillovers have no significant impact on the innovation of Chinese pharmaceutical industry. Although the US export control prevented foreign technology spillovers to China, but indirectly stimulated the domestic technology spillovers to pharmaceutical manufacturing industry in China. Statistical analysis show that the correlation coefficient between innovation capacity and expenditure for high technology adoption is not significant, but the expenditure of purchasing domestic technical is essential to pharmaceutical innovation. This study shows that US export control indirectly, not directly, affected the technological innovation of China's pharmaceutical industry, affected the allocation of innovative resources, but failed to prevent the technological progress and competitiveness improvement of Chinese pharmaceutical industry.

PubMed Central

DAMONTI, A.; MORELLI, P.; MUSSI, M.; PATREGNANI, C.; GARAGIOLA, E.; FOGLIA, E.; PAGANI, R.; CARMINATI, R.; PORAZZI, E.

2015-01-01

Summary Introduction. The objective of this paper is the comparison between two different technologies used for the removal of a uterine myoma, a frequent benign tumor: the standard technology currently used, laparoscopy, and an innovative one, colpoceliotomy. It was considered relevant to evaluate the real and the potential effects of the two technologies implementation and, in addition, the consequences that the introduction or exclusion of the innovative technology would have for both the National Health System (NHS) and the entire community. Methods. The comparison between these two different technologies, the standard and the innovative one, was conducted using a Health Technology Assessment (HTA). In particular, in order to analyse their differences, a multi-dimensional approach was considered: effectiveness, costs and budget impact analysis data were collected, applying different instruments, such as the Activity Based Costing methodology (ABC), the Cost-Effectiveness Analysis (CEA) and the Budget Impact Analysis (BIA). Organisational, equity and social impact were also evaluated. Results. The results showed that the introduction of colpoceliotomy would provide significant economic savings to the Regional and National Health Service; in particular, a saving of € 453.27 for each surgical procedure. Discussion. The introduction of the innovative technology, colpoceliotomy, could be considered a valuable tool; one offering many advantages related to less invasiveness and a shorter surgical procedure than the standard technology currently used (laparoscopy). PMID:26900330

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM: INNOVATION MAKING A DIFFERENCE

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program encourages commercialization of innovative technologies for characterizing and remediating hazardous waste site contamination through four components: Demonstration, Emerging Technology, and Monitoring & Measurement Pr...

Analysis of Federal Stimuli to Development of New Technology by Suppliers to Automobile Manufacturers : an Exploratory Study of Barriers and Facilitators.

DOT National Transportation Integrated Search

1978-03-01

The role of suppliers to the auto industry in promoting innovation is explored. Thirty-two innovations are investigated, and information on their success/failure, area of impact, and key decision points is generated. Based on this data base, barriers...

Implementing a web-based home monitoring system within an academic health care network: barriers and facilitators to innovation diffusion.

PubMed

Pelletier, Alexandra C; Jethwani, Kamal; Bello, Heather; Kvedar, Joseph; Grant, Richard W

2011-01-01

The practice of outpatient type 2 diabetes management is gradually moving from the traditional visit-based, fee-for-service model to a new, health information communication technology (ICT)-supported model that can enable non-visit-based diabetes care. To date, adoption of innovative health ICT tools for diabetes management has been slowed by numerous barriers, such as capital investment costs, lack of reliable reimbursement mechanisms, design defects that have made some systems time-consuming and inefficient to use, and the need to integrate new ICT tools into a system not primarily designed for their use. Effective implementation of innovative diabetes health ICT interventions must address local practice heterogeneity and the interaction of this heterogeneity with clinical care delivery. The Center for Connected Health at Partners Healthcare has implemented a new ICT intervention, Diabetes Connect (DC), a Web-based glucose home monitoring and clinical messaging system. Using the framework of the diffusion of innovation theory, we review the implementation and examine lessons learned as we continue to deploy DC across the health care network. © 2010 Diabetes Technology Society.

An Overview of Materials Structures for Extreme Environments Efforts for 2015 SBIR Phases I and II

NASA Technical Reports Server (NTRS)

Nguyen, Hung D.; Steele, Gynelle C.

2017-01-01

Technological innovation is the overall focus of NASA's Small Business Innovation Research (SBIR) program. The program invests in the development of innovative concepts and technologies to help NASA's mission directorates address critical research and development needs for Agency projects. This report highlights innovative SBIR 2015 Phase I and II projects that specifically address areas in Materials and Structures for Extreme Environments, one of six core competencies at NASA Glenn Research Center. Each article describes an innovation, defines its technical objective, and highlights NASA applications as well as commercial and industrial applications. Ten technologies are featured: metamaterials-inspired aerospace structures, metallic joining to advanced ceramic composites, multifunctional polyolefin matrix composite structures, integrated reacting fluid dynamics and predictive materials degradation models for propulsion system conditions, lightweight inflatable structural airlock (LISA), copolymer materials for fused deposition modeling 3-D printing of nonstandard plastics, Type II strained layer superlattice materials development for space-based focal plane array applications, hydrogenous polymer-regolith composites for radiation-shielding materials, a ceramic matrix composite environmental barrier coating durability model, and advanced composite truss printing for large solar array structures. This report serves as an opportunity for NASA engineers, researchers, program managers, and other personnel to learn about innovations in this technology area as well as possibilities for collaboration with innovative small businesses that could benefit NASA programs and projects.

Drug delivery system innovation and Health Technology Assessment: Upgrading from Clinical to Technological Assessment.

PubMed

Panzitta, Michele; Bruno, Giorgio; Giovagnoli, Stefano; Mendicino, Francesca R; Ricci, Maurizio

2015-11-30

Health Technology Assessment (HTA) is a multidisciplinary health political instrument that evaluates the consequences, mainly clinical and economical, of a health care technology; the HTA aim is to produce and spread information on scientific and technological innovation for health political decision making process. Drug delivery systems (DDS), such as nanocarriers, are technologically complex but they have pivotal relevance in therapeutic innovation. The HTA process, as commonly applied to conventional drug evaluation, should upgrade to a full pharmaceutical assessment, considering the DDS complexity. This is useful to study more in depth the clinical outcome and to broaden its critical assessment toward pharmaceutical issues affecting the patient and not measured by the current clinical evidence approach. We draw out the expertise necessary to perform the pharmaceutical assessment and we propose a format to evaluate the DDS technological topics such as formulation and mechanism of action, physicochemical characteristics, manufacturing process. We integrated the above-mentioned three points in the Evidence Based Medicine approach, which is data source for any HTA process. In this regard, the introduction of a Pharmaceutics Expert figure in the HTA could be fundamental to grant a more detailed evaluation of medicine product characteristics and performances and to help optimizing DDS features to overcome R&D drawbacks. Some aspects of product development, such as manufacturing processes, should be part of the HTA as innovative manufacturing processes allow new products to reach more effectively patient bedside. HTA so upgraded may encourage resource allocating payers to invest in innovative technologies and providers to focus on innovative material properties and manufacturing processes, thus contributing to bring more medicines in therapy in a sustainable manner. Copyright © 2015 Elsevier B.V. All rights reserved.

Technology for hearing loss--as We Know it, and as We Dream it.

PubMed

Clark, Jackie L; Swanepoel, De Wet

2014-09-01

Worldwide demand for accessible hearing health technology continues to increase while the numbers of hearing healthcare specialists are grossly inadequate to meet this demand. Proliferation of innovative technology and the advent of greater access to global connectivity are providing an opportunity to identify and harness new resources that may change current audiological service delivery methods to maximize access, efficiency and impact. By searching through the most current literature and engaging in discussions with industry experts, it is possible to identify avenues that could increase services to those who have hearing loss with innovative healthcare technology. This article aims to review the current state as well as future trends of hearing health technology by addressing: Technology as We Know it; and Technology as We Dream it. Some of the newer technologies we have recently witnessed include: micro processors; personalized computing devices (e.g. smartphones); web-based applications; an expanding clinical repertoire with integrated test equipment; and globalization of telecommunications that opens the door to telehealth; and self-fitting of hearing aids. Yet, innovation continues scaffolding on recent successes with innovations for hearing healthcare expected to increase into the future. As technology and connectivity continue to evolve so should the practice of audiology adapt to the global needs by capitalizing on these advances to optimize service delivery access and sustainability. Capital investment in equipment will be dramatically reduced with smaller, lighter, less costly and more portable equipment. Individuals who live in remote regions with little or no hearing healthcare access can undergo valid assessments by a professional via telehealth. Web-based applications allow clinicians to expand their repertoire and reach of services.

From road to lab to math: the co-evolution of technological, regulatory, and organizational innovations for automotive crash testing.

PubMed

Leonardi, Paul M

2010-04-01

Today, in the midst of economic crisis, senior executives at US automakers and influential industry analysts frequently reflect on the progression that safety testing has taken from the crude trials done on the road, to controlled laboratory experiments, and to today's complex math-based simulation models. They use stories of this seemingly linear and natural sequence to justify further investment in simulation technologies. The analysis presented in this paper shows that change in the structures of automakers' organizations co-evolved with regulations specifying who was at fault in vehicle impacts, how vehicles should be built to withstand the force of an impact, and how testing should be done to assure that vehicles met those requirements. Changes in the regulatory environment were bolstered by new theories about crash test dynamics and changing technologies with which to test those theories. Thus, as new technological and regulatory innovations co-evolved with innovations in organizational structuring, ideas about how to best conduct crash tests shifted and catalyzed new cycles of technological, regulatory, and organizational innovation. However, this co-evolutionary story tells us that the move from road to lab to math was not natural or linear as today's managerial rhetoric would have us believe. Rather, the logic of math-based simulation was the result of technological, regulatory and organizational changes that created an industry-wide ideology that supported the move toward math while making it appear natural within the shifting structure of the industry.

Students' Literary Theater as an Educational Innovation in the Context of Ukrainian and Foreign Experience

ERIC Educational Resources Information Center

Koval, Taisiia

2017-01-01

The article analyzes the process of future teachers-philologists' training in an innovative educational environment. The novelty of educational technology which includes the implementation of innovative ideas of modern education by introducing competency based approach has been justified. It has been stated that the purpose of the students'…

Relationship of Self-Efficacy to Stages of Concern in the Adoption of Innovation in Higher Education

ERIC Educational Resources Information Center

Marcu, Amber Diane

2013-01-01

In this research, it was proposed that self-efficacy is the missing underlying psychological factor in innovation diffusion models of higher education. This is based upon research conducted in the fields of innovation-diffusion in higher education, technology adoption, self-efficacy, health and behavioral change. It was theorized that if…

Imaging System

NASA Technical Reports Server (NTRS)

1995-01-01

The 1100C Virtual Window is based on technology developed under NASA Small Business Innovation (SBIR) contracts to Ames Research Center. For example, under one contract Dimension Technologies, Inc. developed a large autostereoscopic display for scientific visualization applications. The Virtual Window employs an innovative illumination system to deliver the depth and color of true 3D imaging. Its applications include surgery and Magnetic Resonance Imaging scans, viewing for teleoperated robots, training, and in aviation cockpit displays.

Final report. Technology innovation for global change: The role of assessment, R and D, and regulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clark, William C.; Holdren, John P.; Norberg-Bohm, Vicki

2001-11-29

Through the research carried out under this grant, we have made considerable progress in addressing our fundamental research question: How and under what conditions can government stimulate radical technological innovation? More specifically, we have analyzed three pathways through which government may influence the decisions by firms to invest in radical technological innovation: technological opportunism (supply-push policies), regulatory responsiveness (demand-pull policies) and anticipatory action (assessments and information policy). We have produced several written documents, as well as made several presentations of our work. We are now working on a book based on this research, which we will have to a publishermore » in 2002. We are also pursuing other opportunities for dissemination of the results, including both presentations and articles in the academic and policy press.« less

Superfund Training/Tech Transfer

EPA Pesticide Factsheets

This asset includes a collection of information resources, training, and other media related to hazardous waste site cleanup and characterization. A major part of this asset is the CLU-IN System, which is a collection of websites designed to be the central reference library for the development, collection, evaluation, coordination, and dissemination of information relating to the utilization of alternative or innovative treatment technologies... for cleaning up hazardous waste sites (Title 42 Section 9660 (b)(8)). Information includes Best Practices for using innovative technologies, case studies and focus areas about characterization and remediation technologies, emerging issues, optimization, and green(ing) remediation. CLU-IN is available via web-based documentation, live events, podcasts, and videos. Additionally, the Technology Innovation and Field Services Division (TIFSD) supports both classroom and online training registration through Trainex.org. All EPA content is also posted on EPA's website.

[Health care innovation from a territorial perspective: a call for a new approach].

PubMed

Costa, Laís Silveira; Gadelha, Carlos Augusto Grabois; Maldonado, José

2012-12-01

Innovation plays an increasingly important role in health care, partly because it is responsible for a significant share of national investment in research and development, and partly because of its industrial and service provision base, which provides a conduit to future technology. The relationship between health care and development is also strengthened as a result of the leading role of health care in generating innovation. Nevertheless, Brazil's health care production base is persistently weak, hindering both universal provision of health care services and international competitiveness. This article, based on the theoretical framework of Political Economy and innovation systems, has sought to identify variables in subnational contexts that influence the dynamic of innovation generation in health care. To this end, the theoretical approach used lies on the assumption that innovation is a contextualized social process and that the production base in healthcare will remain weak if new variables involved in the dynamic of innovation are not taken into account.

[Innovative educational technology in the teaching of propaedeutic of internal diseases].

PubMed

Тusupbekova, К; Bakirova, R; Nursultanova, S

2015-03-01

This article presents analysis of the results of inculcation of innovative learning technologies in teaching on propaedeutic of internal diseases which is first clinical discipline faced by medical students of the University. Credit-modular training included integration of propaedeutic of internal diseases with basic disciplines of the third year (the normal anatomy, physiology, pathological anatomy, histology, pathophysiology, visual diagnostics and pharmacology). There are 8 models on following systems: respiratory, cardiovascular, musculoskeletal, endocrine, urogenital, hematopoietic, nervous, digestive. The innovative implementation of learning technologies (Problem-based learning, clinical cases, team-oriented teaching, lectures, symposium lectures, discussions, role plays, etc.) and knowledge control (mini-clinical examination, objective structured clinical exam, comprehensive testing) help students to acquire clinical skills, team working and skills of researching work.

Technology Education in Elementary School: Why and How?

ERIC Educational Resources Information Center

Alamaki, Ari

This paper discusses using technology education in the elementary school to encourage innovation and adaptation, technological literacy, and creative problem solving. Technology education is seen based on hands-on activities where pupils make things and become familiar with their technological environment. The hands-on activity should evolve like…

Innovative eLearning: Technology Shaping Contemporary Problem Based Learning: A Cross-Case Analysis

ERIC Educational Resources Information Center

Blackburn, Greg

2015-01-01

Preparing students to be critical thinkers and effective communicators is essential in today's multinational and technologically sophisticated environment. New electronic technologies provide opportunities for creating learning environments that extend the possibilities of "old" but still essential technologies: books, blackboards, and…

Becoming Little Scientists: Technologically-Enhanced Project-Based Language Learning

ERIC Educational Resources Information Center

Dooly, Melinda; Sadler, Randall

2016-01-01

This article outlines research into innovative language teaching practices that make optimal use of technology and Computer-Mediated Communication (CMC) for an integrated approach to Project-Based Learning. It is based on data compiled during a 10- week language project that employed videoconferencing and "machinima" (short video clips…

Development of 3D microwave imaging technology for damage assessment of concrete bridge.

DOT National Transportation Integrated Search

2003-11-01

An innovative microwave 3-dimensional (3D) sub-surface imaging technology is developed for : detecting and quantitatively assessing internal damage of concrete structures. This technology is : based on reconstruction of dielectric profile (image) of ...

75 FR 28782 - Extension of Period for Nominations to the National Medal of Technology and Innovation Nomination...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-24

... innovation and/or be familiar with the education, training, employment and management of technological... Innovations/Bioengineering and Biomedical Technology; Technology Management/Computing/IT/Manufacturing...] Extension of Period for Nominations to the National Medal of Technology and Innovation Nomination Evaluation...

Science-based health innovation in sub-Saharan Africa

PubMed Central

2010-01-01

In recent years emerging markets such as India, China, and Brazil have developed appropriate business models and lower-cost technological innovations to address health challenges locally and internationally. But it is not well understood what capabilities African countries, with their high disease burden, have in science-based health innovation. This gap in knowledge is addressed by this series in BMC International Health and Human Rights. The series presents the results of extensive on-the-ground research in the form of four country case studies of health and biotechnology innovation, six studies of institutions within Africa involved in health product development, and one study of health venture funds in Africa. To the best of our knowledge it is the first extensive collection of empirical work on African science-based health innovation. The four country cases are Ghana, Rwanda, Tanzania and Uganda. The six case studies of institutions are A to Z Textiles (Tanzania), Acorn Technologies (South Africa), Bioventures venture capital fund (South Africa), the Malagasy Institute of Applied Research (IMRA; Madagascar), the Kenyan Medical Research Institute (KEMRI; Kenya), and Niprisan’s development by Nigeria’s National Institute for Pharmaceutical Research and Development and Xechem (Nigeria). All of the examples highlight pioneering attempts to build technological capacity, create economic opportunities, and retain talent on a continent significantly affected by brain drain. They point to the practical challenges for innovators on the ground, and suggest potentially helpful policies, funding streams, and other support systems. For African nations, health innovation represents an opportunity to increase domestic capacity to solve health challenges; for international funders, it is an opportunity to move beyond foreign aid and dependency. The shared goal is creating self-sustaining innovation that has both health and development impacts. While this is a long-term strategy, this series shows the potential of African-led innovation, and indicates how it might balance realism against opportunity. There is ample scope to learn lessons more systematically from cases like those we discuss; to link entrepreneurs, scientists, funders, and policy-makers into a network to share opportunities and challenges; and ultimately to better support and stimulate African-led health innovation. PMID:21144069

Science-based health innovation in sub-Saharan Africa.

PubMed

Al-Bader, Sara; Masum, Hassan; Simiyu, Ken; Daar, Abdallah S; Singer, Peter A

2010-12-13

In recent years emerging markets such as India, China, and Brazil have developed appropriate business models and lower-cost technological innovations to address health challenges locally and internationally. But it is not well understood what capabilities African countries, with their high disease burden, have in science-based health innovation.This gap in knowledge is addressed by this series in BMC International Health and Human Rights. The series presents the results of extensive on-the-ground research in the form of four country case studies of health and biotechnology innovation, six studies of institutions within Africa involved in health product development, and one study of health venture funds in Africa. To the best of our knowledge it is the first extensive collection of empirical work on African science-based health innovation.The four country cases are Ghana, Rwanda, Tanzania and Uganda. The six case studies of institutions are A to Z Textiles (Tanzania), Acorn Technologies (South Africa), Bioventures venture capital fund (South Africa), the Malagasy Institute of Applied Research (IMRA; Madagascar), the Kenyan Medical Research Institute (KEMRI; Kenya), and Niprisan's development by Nigeria's National Institute for Pharmaceutical Research and Development and Xechem (Nigeria).All of the examples highlight pioneering attempts to build technological capacity, create economic opportunities, and retain talent on a continent significantly affected by brain drain. They point to the practical challenges for innovators on the ground, and suggest potentially helpful policies, funding streams, and other support systems.For African nations, health innovation represents an opportunity to increase domestic capacity to solve health challenges; for international funders, it is an opportunity to move beyond foreign aid and dependency. The shared goal is creating self-sustaining innovation that has both health and development impacts. While this is a long-term strategy, this series shows the potential of African-led innovation, and indicates how it might balance realism against opportunity. There is ample scope to learn lessons more systematically from cases like those we discuss; to link entrepreneurs, scientists, funders, and policy-makers into a network to share opportunities and challenges; and ultimately to better support and stimulate African-led health innovation.

National Strategies for Technological Innovation

ERIC Educational Resources Information Center

Rossini, Frederick; Bozeman, Barry

1977-01-01

Considers the implications of the technological innovation literature for possible national strategies for innovation. Sketches highly generalized innovation strategies for nations at various levels of technological development. (Author/IRT)

Creating a climate that catalyses healthcare innovation in the United Kingdom - learning lessons from international innovators.

PubMed

Cresswell, Kathrin; Cunningham-Burley, Sarah; Sheikh, Aziz

2017-01-25

The United Kingdom (UK) lags behind other high-income countries in relation to technological innovation in healthcare. In order to inform UK strategy on how to catalyse innovation, we sought to understand what national strategies can help to promote a climate for innovation in healthcare settings by extracting lessons for the UK from international innovators. We undertook a series of qualitative semi-structured interviews with senior international innovators from a range of health related policy, care/service delivery, commercial and academic backgrounds. Thematic analysis helped to explore how different stakeholder groups could facilitate/inhibit innovation at individual, organisational, and wider societal levels. We conducted 14 interviews and found that a conducive climate for healthcare innovation comprised of national/regional strategies stimulating commercial competition, promoting public/private relationships, and providing central direction (e.g. incentives for adoption and regulation through standards) without being restrictive. Organisational attitudes with a willingness to experiment and to take risks were also seen as important, but a bottom-up approach to innovation, based on the identification of clinical need, was seen as a crucial first step to construct relevant national policies.  There is now a need to create mechanisms through which frontline National Health Service staff in relation can raise ideas/concerns and suggest opportunities for improvement, and then build national innovation environments that seek to address these needs. This should be accompanied by creating competitive health technology markets to stimulate a commercial environment that attracts high-quality health information technology experts and innovators working in partnership with staff and patients.

Social Networking and the Affective Domain of Learning

ERIC Educational Resources Information Center

Carrigan, Robert L.

2013-01-01

In 2006, the U.S. Department of Education commissioned a report called, "Charting the Future of U.S. Higher Education", asking educators to, "...test new teaching methods, content deliveries, and innovative pedagogies using technology-based collaborative applications" (p. 6). Fittingly, technology-based collaborative…

Using innovative instructional technology to meet training needs in public health: a design process.

PubMed

Millery, Mari; Hall, Michelle; Eisman, Joanna; Murrman, Marita

2014-03-01

Technology and distance learning can potentially enhance the efficient and effective delivery of continuing education to the public health workforce. Public Health Training Centers collaborate with instructional technology designers to develop innovative, competency-based online learning experiences that meet pressing training needs and promote best practices. We describe one Public Health Training Center's online learning module design process, which consists of five steps: (1) identify training needs and priority competencies; (2) define learning objectives and identify educational challenges; (3) pose hypotheses and explore innovative, technology-based solutions; (4) develop and deploy the educational experience; and (5) evaluate feedback and outcomes to inform continued cycles of revision and improvement. Examples illustrate the model's application. These steps are discussed within the context of design practices in the fields of education, engineering, and public health. They incorporate key strategies from across these fields, including principles of programmatic design familiar to public health professionals, such as backward design. The instructional technology design process we describe provides a structure for the creativity, collaboration, and systematic strategies needed to develop online learning products that address critical training needs for the public health workforce.

Reframing and Articulating Socio-scientific Classroom Discourses on Genetic Testing from an STS Perspective

NASA Astrophysics Data System (ADS)

Boerwinkel, Dirk Jan; Swierstra, Tsjalling; Waarlo, Arend Jan

2012-08-01

In recent decades, Science & Technology Studies (STS) have revealed the dynamic interaction between science and technology and society. Technology development is not an autonomous process and its artifacts are not socially inert. Society and technology shape each other. Technologies often have `soft impacts' in terms of unpredicted side effects on individuals and society. Nevertheless, current societal discourse on technological innovations is still dominated by `hard impacts' such as quantifiable risks for health, safety and the environment. Furthermore, participants in socio-scientific discourses often underestimate their agency in influencing technological innovations, and at the same time overestimate their freedom of choice to use a technology. Past debates on technological innovations have shown how these debates were framed and often caught in fruitless discourse patterns or arguments. Interventionist STS research experiments with solutions to this problem. Assuming that an STS perspective is helpful in reframing and articulating socio-scientific classroom discourses, the case of genetic testing is used to explore this. An important positive `hard impact' of genetic testing is disease prevention. However, this is put into perspective by addressing `soft impacts' such as limited access to certain careers based on genetic risk and changes in the conception of health and the perception of responsibility for one's health. Discussion stoppers such as `playing God' or `We can't stop technological advancement' can be challenged through uncovering underlying assumptions. The use of narratives and future scenarios in classrooms seems fruitful in provoking imagination and engaging students in public debates on technological innovations.

10 CFR 603.110 - Use of TIAs.

Code of Federal Regulations, 2011 CFR

2011-01-01

... requirements and foster within the technology base new relationships and practices to advance the national economic and energy security of the United States, to promote scientific and technological innovation in...

Modeling operation of mechanism of holistic management of technological processes at enterprise

NASA Astrophysics Data System (ADS)

Igorevich Shanin, Igor; Aleksandrovna Boris, Olga

2018-03-01

Enterprises applying modeling and technological process management approaches represent a sector of a new innovative economic system. First of all, they are innovators using innovative proposals and various resources to solve practical problems. Their work leads to balanced positive technological changes. In other words, they constitute industrial entrepreneurship with innovative goals and vice versa - innovative entrepreneurship with industrial objectives. It should be noted that the mechanism of holistic management of technological processes at the enterprise combines a traditional industrial organization of production, an innovative and technological enterprise. The enterprise borrows industrial targets from the latter one, an innovative component - from innovative activity and entrepreneurial approaches to holistic management - from a commercial firm.

Generational Differences in Technology Adoption in Community Colleges

ERIC Educational Resources Information Center

Rosario, Victoria C.

2012-01-01

This research study investigated the technological perceptions and expectations of community college students, faculty, administrators, and Information Technology (IT) staff. The theoretical framework is based upon two assumptions on the process of technological innovation: it can be explained by diffusion of adoption theory, and by studying the…

COLLOID POLISHING FILTER METHOD - FILTER FLOW TECHNOLOGY, INC. - INNOVATIVE TECHNOLOGY EVALUATION REPORT

EPA Science Inventory

The CPFM technology is designed to remove trace to moderate levels of nontritium radionuclides and heavy metal pollutants from water. The technology uses a proprietary compound that consists of inorganic, oxide-based granules. This mixed is designed to remove heavy metals and rad...

75 FR 8043 - National Medal of Technology and Innovation Nomination Evaluation Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-23

... Nation's highest honor for technological innovation, awarded annually by the President of the United... utilizing technological innovation and/or be familiar with the education, training, employment and.../Manufacturing Innovation; Technological Manpower/Workforce Training/Education. Committee members generally are...

76 FR 80901 - National Medal of Technology and Innovation Nomination Evaluation Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-27

... Nation's highest honor for technological innovation, awarded annually by the President of the United... utilizing technological innovation and/or be familiar with the education, training, employment and... Management/Computing/IT/Manufacturing Innovation; Technological Manpower/Workforce Training/Education. Under...

Innovating for quality and value: Utilizing national quality improvement programs to identify opportunities for responsible surgical innovation.

PubMed

Woo, Russell K; Skarsgard, Erik D

2015-06-01

Innovation in surgical techniques, technology, and care processes are essential for improving the care and outcomes of surgical patients, including children. The time and cost associated with surgical innovation can be significant, and unless it leads to improvements in outcome at equivalent or lower costs, it adds little or no value from the perspective of the patients, and decreases the overall resources available to our already financially constrained healthcare system. The emergence of a safety and quality mandate in surgery, and the development of the American College of Surgeons National Surgical Quality Improvement Program (NSQIP) allow needs-based surgical care innovation which leads to value-based improvement in care. In addition to general and procedure-specific clinical outcomes, surgeons should consider the measurement of quality from the patients' perspective. To this end, the integration of validated Patient Reported Outcome Measures (PROMs) into actionable, benchmarked institutional outcomes reporting has the potential to facilitate quality improvement in process, treatment and technology that optimizes value for our patients and health system. Copyright © 2015 Elsevier Inc. All rights reserved.

Seizing the strategic opportunities of emerging technologies by building up innovation system: monoclonal antibody development in China.

PubMed

Zhang, Mao-Yu; Li, Jian; Hu, Hao; Wang, Yi-Tao

2015-11-04

Monoclonal antibodies (mAbs), as an emerging technology, have become increasingly important in the development of human therapeutic agents. How developing countries such as China could seize this emerging technological opportunity remains a poorly studied issue in prior literature. Thus, this paper aims to investigate the research and development of mAbs in China based on an innovation system functions approach and probes into the question of how China has been taking advantage of emerging technologies to overcome its challenges of building up a complete innovation system in developing mAbs. Mixed research methods were applied by combining archival data and field interviews. Archival data from the China Food and Drug Administration, Web of Science, the United States Patent and Trademark Office, the Chinese Clinical Trial Registry, and the National Science and Technology Report Service were used to examine the status quo of the technology and research and development (R&D) activities in China, while the opinions of researchers and managers in this field were synthesized from the interviews. From the perspective of innovation system functions, technological development of mAb in China is being driven by incentives such as the subsidies from the State and corporate R&D funding. Knowledge diffusion has been well served over the last 10 years through exchanging information on networks and technology transfer with developed countries. The State has provided clear guidance on search of emerging mAb technologies. Legitimacy of mAb in China has gained momentum owing to the implementation of government policies stipulated in the "The Eleventh Five-year Plan" in 2007, as well as national projects such as the "973 Program" and "863 Program", among others. The potential of market formation stays high because of the rising local demand and government support. Entrepreneurial activities for mAb continue to prosper. In addition, the situation of resource supply has been improved with the support of the State. This study finds that a complete innovation system for mAb has begun to take shape in China. MAb innovators in China are capitalizing on this emerging technological opportunity to participate in the global drive of developing the value chain for the innovative drug. In the long run, the build-up of the research system for mAb in China could bring about more driving forces to the mAb innovation system.

A new model for graduate education and innovation in medical technology.

PubMed

Yazdi, Youseph; Acharya, Soumyadipta

2013-09-01

We describe a new model of graduate education in bioengineering innovation and design- a year long Master's degree program that educates engineers in the process of healthcare technology innovation for both advanced and low-resource global markets. Students are trained in an iterative "Spiral Innovation" approach that ensures early, staged, and repeated examination of all key elements of a successful medical device. This includes clinical immersion based problem identification and assessment (at Johns Hopkins Medicine and abroad), team based concept and business model development, and project planning based on iterative technical and business plan de-risking. The experiential, project based learning process is closely supported by several core courses in business, design, and engineering. Students in the program work on two team based projects, one focused on addressing healthcare needs in advanced markets and a second focused on low-resource settings. The program recently completed its fourth year of existence, and has graduated 61 students, who have continued on to industry or startups (one half), additional graduate education, or medical school (one third), or our own Global Health Innovation Fellowships. Over the 4 years, the program has sponsored 10 global health teams and 14 domestic/advanced market medtech teams, and launched 5 startups, of which 4 are still active. Projects have attracted over US$2.5M in follow-on awards and grants, that are supporting the continued development of over a dozen projects.

Problem Based Learning in Design and Technology Education Supported by Hypermedia-Based Environments

ERIC Educational Resources Information Center

Page, Tom; Lehtonen, Miika

2006-01-01

Audio-visual advances in virtual reality (VR) technology have given rise to innovative new ways to teach and learn. However, so far teaching and learning processes have been technologically driven as opposed to pedagogically led. This paper identifies the development of a pedagogical model and its application for teaching, studying and learning…

Peer-Reviewed Reports of Innovative Approaches in Medical Education.

ERIC Educational Resources Information Center

Anderson, M. Brownell, Ed.

2000-01-01

Presents 73 summaries of innovative approaches in medical education covering such topics as professionalism, culture and diversity, preclinical education, clinical education, evidence-based medicine, education in the community, longitudinal ambulatory care experiences, applications of computer technology, residents as teachers, graduate medical…

Opportunities of real innovation projects for the acquisition of professional competences in Engineering

NASA Astrophysics Data System (ADS)

de la Haba, M. J.; Taguas, E. V.; del Campillo, M. C.; Guerrero, J. E.; Pérez-Marín, M. D.

2012-04-01

The internationalization of the curricula and the development of skills for the labor market are core objectives of the Bologna Process. In this work, the structure and the organization of a Master Course "Innovation and New Technologies in Agrifood Engineering", in the University of Cordoba is presented. The theorist contents are focused on: 1) the opportunities (public and private) for the creation of Technology-Based Innovative Enterprises (TBIE) by emphasizing cooperation between stakeholders to enhance the skills of students; 2) the role of the University for supporting them and for collaborating in the "Open Innovation" among companies in different European countries. In the practical topics, the students must use that information for preparing a real innovation project of agrifood products which is tutored by the teachers and is presented and evaluated by a member of CTA (Corporación Tecnológica de Andalucía), an institution of sponsoring of innovation and technological projects. The evaluation of the students about its utility and the organization aspects corresponding to the course 2010-2011 was 4.2 in scale from 0 to 5. In this context, teachers have noted that innovation processes have improved the employability of students as they have been prepared to face the market challenges and opportunities.

Impact of New Camera Technologies on Discoveries in Cell Biology.

PubMed

Stuurman, Nico; Vale, Ronald D

2016-08-01

New technologies can make previously invisible phenomena visible. Nowhere is this more obvious than in the field of light microscopy. Beginning with the observation of "animalcules" by Antonie van Leeuwenhoek, when he figured out how to achieve high magnification by shaping lenses, microscopy has advanced to this day by a continued march of discoveries driven by technical innovations. Recent advances in single-molecule-based technologies have achieved unprecedented resolution, and were the basis of the Nobel prize in Chemistry in 2014. In this article, we focus on developments in camera technologies and associated image processing that have been a major driver of technical innovations in light microscopy. We describe five types of developments in camera technology: video-based analog contrast enhancement, charge-coupled devices (CCDs), intensified sensors, electron multiplying gain, and scientific complementary metal-oxide-semiconductor cameras, which, together, have had major impacts in light microscopy. © 2016 Marine Biological Laboratory.

Technology Transfer: A Case Study of Programs and Practices at NASA, DOD, DOC, and Academia

ERIC Educational Resources Information Center

Blood, John R.

2009-01-01

Technology transfer is vital to humanity. It spurs innovation, promotes commerce, and provides technology-based goods and services. Technology transfer is also highly complex and interdependent in nature. This interdependence is exemplified principally by the various technology transfer interactions between government, industry, and academia. …

Less noise, more hacking: how to deploy principles from MIT's hacking medicine to accelerate health care.

PubMed

DePasse, Jacqueline W; Carroll, Ryan; Ippolito, Andrea; Yost, Allison; Santorino, Data; Chu, Zen; Olson, Kristian R

2014-07-01

Medical technology offers enormous potential for scalable medicine--to improve the quality and access in health care while simultaneously reducing cost. However, current medical device innovation within companies often only offers incremental advances on existing products, or originates from engineers with limited knowledge of the clinical complexities. We describe how the Hacking Medicine Initiative, based at Massachusetts Institute of Technology has developed an innovative "healthcare hackathon" approach, bringing diverse teams together to rapidly validate clinical needs and develop solutions. Hackathons are based on three core principles; emphasis on a problem-based approach, cross-pollination of disciplines, and "pivoting" on or rapidly iterating on ideas. Hackathons also offer enormous potential for innovation in global health by focusing on local needs and resources as well as addressing feasibility and cultural contextualization. Although relatively new, the success of this approach is clear, as evidenced by the development of successful startup companies, pioneering product design, and the incorporation of creative people from outside traditional life science backgrounds who are working with clinicians and other scientists to create transformative innovation in health care.

Prioritizing investments in innovations to protect women from the leading causes of maternal death

PubMed Central

2014-01-01

PATH, an international nonprofit organization, assessed nearly 40 technologies for their potential to reduce maternal mortality from postpartum hemorrhage and preeclampsia and eclampsia in low-resource settings. The evaluation used a new Excel-based prioritization tool covering 22 criteria developed by PATH, the Maternal and Neonatal Directed Assessment of Technology (MANDATE) model, and consultations with experts. It identified five innovations with especially high potential: technologies to improve use of oxytocin, a uterine balloon tamponade, simplified dosing of magnesium sulfate, an improved proteinuria test, and better blood pressure measurement devices. Investments are needed to realize the potential of these technologies to reduce mortality. PMID:24405972

Prioritizing investments in innovations to protect women from the leading causes of maternal death.

PubMed

Herrick, Tara M; Harner-Jay, Claudia M; Levisay, Alice M; Coffey, Patricia S; Free, Michael J; LaBarre, Paul D

2014-01-09

PATH, an international nonprofit organization, assessed nearly 40 technologies for their potential to reduce maternal mortality from postpartum hemorrhage and preeclampsia and eclampsia in low-resource settings. The evaluation used a new Excel-based prioritization tool covering 22 criteria developed by PATH, the Maternal and Neonatal Directed Assessment of Technology (MANDATE) model, and consultations with experts. It identified five innovations with especially high potential: technologies to improve use of oxytocin, a uterine balloon tamponade, simplified dosing of magnesium sulfate, an improved proteinuria test, and better blood pressure measurement devices. Investments are needed to realize the potential of these technologies to reduce mortality.

Infographic Development by Accelerated Bachelor of Science in Nursing Students: An Innovative Technology-Based Approach to Public Health Education.

PubMed

Falk, Nancy L

Health communications and baccalaureate nursing education are increasingly impacted by new technological tools. This article describes how an Accelerated Bachelor of Science in Nursing program incorporates an infographic assignment into a graduate-level online health information and technology course. Students create colorful, engaging infographics using words and visuals to communicate public health information. The assignment, which incorporates the use of data and evidence, provides students the opportunity to acquire new research and technology skills while gaining confidence creating and innovating. The finished products may be disseminated, serving as vehicles to influence public health and well-being.

Challenges Achieved By Innovative Technologies Our Link to a Safer, Cleaner, Healthier Tomorrow - 12369

DOE Office of Scientific and Technical Information (OSTI.GOV)

Henderson, Heidi; Shoffner, Peggy; Lagos, Leonel E.

2012-07-01

The River Corridor Closure Project is the nation's largest environmental cleanup closure project where innovative technologies are being utilized to overcome DOE's environmental clean-up challenges. DOE provides a Technology Needs Statement that specifies their on-site challenges and the criteria to overcome those challenges. This allows for both the private sector and federally funded organizations to respond with solutions that meet their immediate needs. DOE selects the company based on their ability to reduce risk to human health and the environment, improve efficiency of the cleanup, and lower costs. These technologies are our link to a cleaner, safer, healthier tomorrow. (authors)

Global assessment of technological innovation for climate change adaptation and mitigation in developing world.

PubMed

Adenle, Ademola A; Azadi, Hossein; Arbiol, Joseph

2015-09-15

Concerns about mitigating and adapting to climate change resulted in renewing the incentive for agricultural research investments and developing further innovation priorities around the world particularly in developing countries. In the near future, development of new agricultural measures and proper diffusion of technologies will greatly influence the ability of farmers in adaptation and mitigation to climate change. Using bibliometric approaches through output of academic journal publications and patent-based data, we assess the impact of research and development (R&D) for new and existing technologies within the context of climate change mitigation and adaptation. We show that many developing countries invest limited resources for R&D in relevant technologies that have great potential for mitigation and adaption in agricultural production. We also discuss constraints including weak infrastructure, limited research capacity, lack of credit facilities and technology transfer that may hinder the application of innovation in tackling the challenges of climate change. A range of policy measures is also suggested to overcome identified constraints and to ensure that potentials of innovation for climate change mitigation and adaptation are realized. Copyright © 2015 Elsevier Ltd. All rights reserved.

Disruptive Innovation Can Prevent the Next Pandemic.

PubMed

Shaikh, Affan T; Ferland, Lisa; Hood-Cree, Robert; Shaffer, Loren; McNabb, Scott J N

2015-01-01

Public health surveillance (PHS) is at a tipping point, where the application of novel processes, technologies, and tools promise to vastly improve efficiency and effectiveness. Yet twentieth century, entrenched ideology and lack of training results in slow uptake and resistance to change. The term disruptive innovation - used to describe advances in technology and processes that change existing markets - is useful to describe the transformation of PHS. Past disruptive innovations used in PHS, such as distance learning, the smart phone, and field-based laboratory testing have outpaced older services, practices, and technologies used in the traditional classroom, governmental offices, and personal communication, respectively. Arguably, the greatest of these is the Internet - an infrastructural innovation that continues to enable exponential benefits in seemingly limitless ways. Considering the Global Health Security Agenda and facing emerging and reemerging infectious disease threats, evolving environmental and behavioral risks, and ever changing epidemiologic trends, PHS must transform. Embracing disruptive innovation in the structures and processes of PHS can be unpredictable. However, it is necessary to strengthen and unlock the potential to prevent, detect, and respond.

Innovation Value of Information Technology: Impact of Information Technology--Intensity on Innovation Capability and Firm Performance

ERIC Educational Resources Information Center

Ramamani, Mahesh Kumar

2010-01-01

Though information technology adoptions have been always referred to as innovations in firms, much of the business value literature has concentrated on the tangible and immediately measurable impacts of information technology (IT) adoptions. This study aims to explore the impact of information technology investments on the innovativeness of a…

Analysis of Technological Innovation and Environmental Performance Improvement in Aviation Sector

PubMed Central

Lee, Joosung; Mo, Jeonghoon

2011-01-01

The past oil crises have caused dramatic improvements in fuel efficiency in all industrial sectors. The aviation sector—aircraft manufacturers and airlines—has also made significant efforts to improve the fuel efficiency through more advanced jet engines, high-lift wing designs, and lighter airframe materials. However, the innovations in energy-saving aircraft technologies do not coincide with the oil crisis periods. The largest improvement in aircraft fuel efficiency took place in the 1960s while the high oil prices in the 1970s and on did not induce manufacturers or airlines to achieve a faster rate of innovation. In this paper, we employ a historical analysis to examine the socio-economic reasons behind the relatively slow technological innovation in aircraft fuel efficiency over the last 40 years. Based on the industry and passenger behaviors studied and prospects for alternative fuel options, this paper offers insights for the aviation sector to shift toward more sustainable technological options in the medium term. Second-generation biofuels could be the feasible option with a meaningful reduction in aviation’s lifecycle environmental impact if they can achieve sufficient economies of scale. PMID:22016716

Analysis of technological innovation and environmental performance improvement in aviation sector.

PubMed

Lee, Joosung; Mo, Jeonghoon

2011-09-01

The past oil crises have caused dramatic improvements in fuel efficiency in all industrial sectors. The aviation sector-aircraft manufacturers and airlines-has also made significant efforts to improve the fuel efficiency through more advanced jet engines, high-lift wing designs, and lighter airframe materials. However, the innovations in energy-saving aircraft technologies do not coincide with the oil crisis periods. The largest improvement in aircraft fuel efficiency took place in the 1960s while the high oil prices in the 1970s and on did not induce manufacturers or airlines to achieve a faster rate of innovation. In this paper, we employ a historical analysis to examine the socio-economic reasons behind the relatively slow technological innovation in aircraft fuel efficiency over the last 40 years. Based on the industry and passenger behaviors studied and prospects for alternative fuel options, this paper offers insights for the aviation sector to shift toward more sustainable technological options in the medium term. Second-generation biofuels could be the feasible option with a meaningful reduction in aviation's lifecycle environmental impact if they can achieve sufficient economies of scale.

Student-Driven Classroom Technologies: Transmedia Navigation and Tranformative Communications

ERIC Educational Resources Information Center

Mills, Leila A.; Knezek, Gerald A.; Wakefield, Jenny S.

2013-01-01

This research paper explores middle school student attitudes towards learning with technology and proposes a design-based approach to formulating instruction that includes innovative classroom technology use with computers and communications technologies placed in the hands of students. The intent of this research is to advance practice and theory…

Development Principles of the Pedagogical System Aimed at Bachelor Training Based on Modern Information Technology

ERIC Educational Resources Information Center

Kurymbayev, Sayat G.; Samashova, Gulfarida E.; Alshynbayeva, Zhuldyz E.; Mukhametzhanova, Aigul O.; Sharazdin, Adilzada M.; Kalybekova, Kalamkas S.; Kosybaeva, Umitzhan A.

2016-01-01

Modern education is aimed at training competent specialists, which requires modernizing the training process by implementing innovative technologies, especially information technologies. Information technologies allow quickly accessing necessary data, which speeds up the training process. This paper deals with issues related to training bachelors…

Steps toward a Technology for the Diffusion of Innovations.

ERIC Educational Resources Information Center

Stolz, Stephanie B.

Research-based technologies for solving problems currently exist but are not being widely implemented. Although user variables, program effectiveness, and political considerations have been documented as correlates of implementation, general non-implementation of the technology still exists, due to a lack of methods. A technology of dissemination…

78 FR 90 - National Medal of Technology and Innovation Call for 2013 Nominations

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-02

... Medal highlights the national importance of fostering technological innovation resulting in commercially...] National Medal of Technology and Innovation Call for 2013 Nominations AGENCY: United States Patent and... Medal of Technology and Innovation (NMTI). Since establishment by Congress in the Stevenson-Wydler...

40 CFR 35.908 - Innovative and alternative technologies.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Innovative and alternative technologies... § 35.908 Innovative and alternative technologies. (a) Policy. EPA's policy is to encourage and, where possible, to assist in the development of innovative and alternative technologies for the construction of...

40 CFR 35.908 - Innovative and alternative technologies.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 1 2013-07-01 2013-07-01 false Innovative and alternative technologies... § 35.908 Innovative and alternative technologies. (a) Policy. EPA's policy is to encourage and, where possible, to assist in the development of innovative and alternative technologies for the construction of...

40 CFR 35.908 - Innovative and alternative technologies.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 1 2012-07-01 2012-07-01 false Innovative and alternative technologies... § 35.908 Innovative and alternative technologies. (a) Policy. EPA's policy is to encourage and, where possible, to assist in the development of innovative and alternative technologies for the construction of...

40 CFR 35.908 - Innovative and alternative technologies.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 1 2014-07-01 2014-07-01 false Innovative and alternative technologies... § 35.908 Innovative and alternative technologies. (a) Policy. EPA's policy is to encourage and, where possible, to assist in the development of innovative and alternative technologies for the construction of...

40 CFR 35.908 - Innovative and alternative technologies.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Innovative and alternative technologies... § 35.908 Innovative and alternative technologies. (a) Policy. EPA's policy is to encourage and, where possible, to assist in the development of innovative and alternative technologies for the construction of...

Technology-based suicide prevention: current applications and future directions.

PubMed

Luxton, David D; June, Jennifer D; Kinn, Julie T

2011-01-01

This review reports on current and emerging technologies for suicide prevention. Technology-based programs discussed include interactive educational and social networking Web sites, e-mail outreach, and programs that use mobile devices and texting. We describe innovative applications such as virtual worlds, gaming, and text analysis that are currently being developed and applied to suicide prevention and outreach programs. We also discuss the benefits and limitations of technology-based applications and discuss future directions for their use.

Investigating Teachers' Exploration of a Professional Development Website: An Innovative Approach to Understanding the Factors that Motivate Teachers to Use Internet-Based Resources

ERIC Educational Resources Information Center

Beach, Pamela; Willows, Dale

2014-01-01

This qualitative study examined an innovative methodology, combining screen capture technology and a retrospective think aloud, for exploring the use of Internet-based resources by elementary teachers. Pre-service and in-service teachers explored "The Balanced Literacy Diet," a free, interactive, and evidenced-informed professional…

Technology Transfer: A Third World Perspective.

ERIC Educational Resources Information Center

Akubue, Anthony I.

2002-01-01

Technology transfer models are based on assumptions that do not reflect Third-World realities. Obstacles to building indigenous technology capacity include multinational corporations' control of innovations, strings attached to foreign aid, and indigenous reluctance to undertake research. Four areas of development include foreign direct…

How does venture capital operate in medical innovation?

PubMed Central

Lehoux, P; Miller, F A; Daudelin, G

2016-01-01

While health policy scholars wish to encourage the creation of technologies that bring more value to healthcare, they may not fully understand the mandate of venture capitalists and how they operate. This paper aims to clarify how venture capital operates and to illustrate its influence over the kinds of technologies that make their way into healthcare systems. The paper draws on the international innovation policy scholarship and the lessons our research team learned throughout a 5-year fieldwork conducted in Quebec (Canada). Current policies support the development of technologies that capital investors identify as valuable, and which may not align with important health needs. The level of congruence between a given health technology-based venture and the mandate of venture capital is highly variable, explaining why some types of innovation may never come into existence. While venture capitalists’ mandate and worldview are extraneous to healthcare, they shape health technologies in several, tangible ways. Clinical leaders and health policy scholars could play a more active role in innovation policy. Because certain types of technology are more likely than others to help tackle the intractable problems of healthcare systems, public policies should be equipped to promote those that address the needs of a growing elderly population, support patients who are afflicted by chronic diseases and reduce health disparities. PMID:27547447

How does venture capital operate in medical innovation?

PubMed

Lehoux, P; Miller, F A; Daudelin, G

2016-07-01

While health policy scholars wish to encourage the creation of technologies that bring more value to healthcare, they may not fully understand the mandate of venture capitalists and how they operate. This paper aims to clarify how venture capital operates and to illustrate its influence over the kinds of technologies that make their way into healthcare systems. The paper draws on the international innovation policy scholarship and the lessons our research team learned throughout a 5-year fieldwork conducted in Quebec (Canada). Current policies support the development of technologies that capital investors identify as valuable, and which may not align with important health needs. The level of congruence between a given health technology-based venture and the mandate of venture capital is highly variable, explaining why some types of innovation may never come into existence. While venture capitalists' mandate and worldview are extraneous to healthcare, they shape health technologies in several, tangible ways. Clinical leaders and health policy scholars could play a more active role in innovation policy. Because certain types of technology are more likely than others to help tackle the intractable problems of healthcare systems, public policies should be equipped to promote those that address the needs of a growing elderly population, support patients who are afflicted by chronic diseases and reduce health disparities.

Technology Adoption: an Interaction Perspective

NASA Astrophysics Data System (ADS)

Sitorus, Hotna M.; Govindaraju, Rajesri; Wiratmadja, I. I.; Sudirman, Iman

2016-02-01

The success of a new technology depends on how well it is accepted by its intended users. Many technologies face the problem of low adoption rate, despite the benefits. An understanding of what makes people accept or reject a new technology can help speed up the adoption rate. This paper presents a framework for technology adoption based on an interactive perspective, resulting from a literature study on technology adoption. In studying technology adoption, it is necessary to consider the interactions among elements involved in the system, for these interactions may generate new characteristics or new relationships. The interactions among elements in a system adoption have not received sufficient consideration in previous studies of technology adoption. Based on the proposed interaction perspective, technology adoption is elaborated by examining interactions among the individual (i.e. the user or prospective user), the technology, the task and the environment. The framework is formulated by adopting several theories, including Perceived Characteristics of Innovating, Diffusion of Innovation Theory, Technology Acceptance Model, Task-Technology Fit and usability theory. The proposed framework is illustrated in the context of mobile banking adoption. It is aimed to offer a better understanding of determinants of technology adoption in various contexts, including technology in manufacturing systems.

Product and technology innovation: what can biomimicry inspire?

PubMed

Lurie-Luke, Elena

2014-12-01

Biomimicry (bio- meaning life in Greek, and -mimesis, meaning to copy) is a growing field that seeks to interpolate natural biological mechanisms and structures into a wide range of applications. The rise of interest in biomimicry in recent years has provided a fertile ground for innovation. This review provides an eco-system based analysis of biomimicry inspired technology and product innovation. A multi-disciplinary framework has been developed to accomplish this analysis and the findings focus on the areas that have been most strikingly affected by the application of biomimicry and also highlight the emerging trends and opportunity areas. Copyright © 2014 Elsevier Inc. All rights reserved.

Decision support for redesigning wastewater treatment technologies.

PubMed

McConville, Jennifer R; Künzle, Rahel; Messmer, Ulrike; Udert, Kai M; Larsen, Tove A

2014-10-21

This paper offers a methodology for structuring the design space for innovative process engineering technology development. The methodology is exemplified in the evaluation of a wide variety of treatment technologies for source-separated domestic wastewater within the scope of the Reinvent the Toilet Challenge. It offers a methodology for narrowing down the decision-making field based on a strict interpretation of treatment objectives for undiluted urine and dry feces and macroenvironmental factors (STEEPLED analysis) which influence decision criteria. Such an evaluation identifies promising paths for technology development such as focusing on space-saving processes or the need for more innovation in low-cost, energy-efficient urine treatment methods. Critical macroenvironmental factors, such as housing density, transportation infrastructure, and climate conditions were found to affect technology decisions regarding reactor volume, weight of outputs, energy consumption, atmospheric emissions, investment cost, and net revenue. The analysis also identified a number of qualitative factors that should be carefully weighed when pursuing technology development; such as availability of O&M resources, health and safety goals, and other ethical issues. Use of this methodology allows for coevolution of innovative technology within context constraints; however, for full-scale technology choices in the field, only very mature technologies can be evaluated.

Campus Technology Innovators Awards 2010

ERIC Educational Resources Information Center

Lloyd, Meg; Raths, David

2010-01-01

Each year in judging the Campus Technology Innovators awards, the authors have the privilege of reading through hundreds of fascinating examples of technology innovation on campus. Nominated projects cover the gamut of technology areas, from assessment and advising to wireless and web 2.0. This article presents 11 innovator award winners of this…

Innovative CO2 LASER-Based Pavement Striping and Stripe Removal

DOT National Transportation Integrated Search

2014-07-01

This is a Technical Report of an FY2014 NDOT funded project on Innovative CO2 Laserbased Pavement Striping and Stripe Removal. The project was concerned with adopting the laser technology for pavement stripe and markers removal and inferring on its e...

76 FR 18166 - Technology Innovation Program Advisory Board

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-01

... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Technology Innovation Program Advisory Board AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of public meeting. SUMMARY: The Technology Innovation Program Advisory Board, National...

75 FR 62369 - Technology Innovation Program Advisory Board

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-08

... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Technology Innovation Program Advisory Board AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of public meeting. SUMMARY: The Technology Innovation Program Advisory Board, National...

75 FR 22553 - Technology Innovation Program Advisory Board

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-29

... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Technology Innovation Program Advisory Board AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of public meeting. SUMMARY: The Technology Innovation Program Advisory Board, National...

Purity and the dangers of regenerative medicine: regulatory innovation of human tissue-engineered technology.

PubMed

Faulkner, Alex; Kent, Julie; Geesink, Ingrid; FitzPatrick, David

2006-11-01

This paper examines the development of innovation in human tissue technologies as a form of regenerative medicine, firstly by applying 'pollution ideas' to contemporary trends in its risk regulation and to the processes of regulatory policy formation, and secondly by analysing the classificatory processes deployed in regulatory policy. The analysis draws upon data from fieldwork and documentary materials with a focus on the UK and EU (2002-05) and explores four arenas: governance and regulatory policy; commercialisation and the market; 'evidentiality' manifest in evidence-based policy; and publics' and technology users' values and ethics. The analysis suggests that there is a trend toward 'purification' across these arenas, both material and socio-political. A common process of partitioning is found in stakeholders' attempts to define a clear terrain, which the field of tissue-engineered technology might occupy. We conclude that pollution ideas and partitioning processes are useful in understanding regulatory ordering and innovation in the emerging technological zone of human tissue engineering.

A Comparative Case Analysis of the Innovation in Five STEM Schools Based on Zhao's Framework for 21st Century World Class Learners

ERIC Educational Resources Information Center

Griffin, Patricia A.

2015-01-01

STEM Schools purport to prepare students to learn and work in the 21st Century by providing students with innovative learning experiences through the interdisciplinary integration of science, technology, engineering, and math (Tsupros, 2009). Advocates of STEM and innovative school models argue that the traditional school system does not and…

The innovation policy of nanotechnology development and convergence for the new Korean government

NASA Astrophysics Data System (ADS)

Bae, Seoung Hun; Lim, Jung Sun; Shin, Kwang Min; Kim, Chang Woo; Kang, Sang Kyu; Shin, Minsoo

2013-11-01

Since 2001, Korea has been establishing and executing policy for the development of nanotechnology in accordance with the National Comprehensive Development Plan of Nanotechnology (NCDPN) periods I, II, and III. NCDPN has been focused on innovation in wide spectrum of technology development, and NT-based convergence technologies are expected to contribute 35 % of the total GDP (about 5.02 billion won) with 1.2 million of job creation in KOREA at 2020. Establishment of new strategies for innovating and commercializing nanotechnology is an emerging global issue in major countries including the United States, Japan, Germany, and Korea, with particular concerns for safety in the implementations of nanotechnology (EHS). Under these circumstances, Korea needs to create a post-catch-up strategy beyond fast-follower approach, to compete effectively with nanotechnology-leading countries. This study analyzes the current status of Korean nanotechnology development and relevant policies, and suggests future policy directions for the new Korean government based on innovative competition theory.

Need to Knowledge (NtK) Model: an evidence-based framework for generating technological innovations with socio-economic impacts.

PubMed

Flagg, Jennifer L; Lane, Joseph P; Lockett, Michelle M

2013-02-15

Traditional government policies suggest that upstream investment in scientific research is necessary and sufficient to generate technological innovations. The expected downstream beneficial socio-economic impacts are presumed to occur through non-government market mechanisms. However, there is little quantitative evidence for such a direct and formulaic relationship between public investment at the input end and marketplace benefits at the impact end. Instead, the literature demonstrates that the technological innovation process involves a complex interaction between multiple sectors, methods, and stakeholders. The authors theorize that accomplishing the full process of technological innovation in a deliberate and systematic manner requires an operational-level model encompassing three underlying methods, each designed to generate knowledge outputs in different states: scientific research generates conceptual discoveries; engineering development generates prototype inventions; and industrial production generates commercial innovations. Given the critical roles of engineering and business, the entire innovation process should continuously consider the practical requirements and constraints of the commercial marketplace.The Need to Knowledge (NtK) Model encompasses the activities required to successfully generate innovations, along with associated strategies for effectively communicating knowledge outputs in all three states to the various stakeholders involved. It is intentionally grounded in evidence drawn from academic analysis to facilitate objective and quantitative scrutiny, and industry best practices to enable practical application. The Need to Knowledge (NtK) Model offers a practical, market-oriented approach that avoids the gaps, constraints and inefficiencies inherent in undirected activities and disconnected sectors. The NtK Model is a means to realizing increased returns on public investments in those science and technology programs expressly intended to generate beneficial socio-economic impacts.

Need to Knowledge (NtK) Model: an evidence-based framework for generating technological innovations with socio-economic impacts

PubMed Central

2013-01-01

Background Traditional government policies suggest that upstream investment in scientific research is necessary and sufficient to generate technological innovations. The expected downstream beneficial socio-economic impacts are presumed to occur through non-government market mechanisms. However, there is little quantitative evidence for such a direct and formulaic relationship between public investment at the input end and marketplace benefits at the impact end. Instead, the literature demonstrates that the technological innovation process involves a complex interaction between multiple sectors, methods, and stakeholders. Discussion The authors theorize that accomplishing the full process of technological innovation in a deliberate and systematic manner requires an operational-level model encompassing three underlying methods, each designed to generate knowledge outputs in different states: scientific research generates conceptual discoveries; engineering development generates prototype inventions; and industrial production generates commercial innovations. Given the critical roles of engineering and business, the entire innovation process should continuously consider the practical requirements and constraints of the commercial marketplace. The Need to Knowledge (NtK) Model encompasses the activities required to successfully generate innovations, along with associated strategies for effectively communicating knowledge outputs in all three states to the various stakeholders involved. It is intentionally grounded in evidence drawn from academic analysis to facilitate objective and quantitative scrutiny, and industry best practices to enable practical application. Summary The Need to Knowledge (NtK) Model offers a practical, market-oriented approach that avoids the gaps, constraints and inefficiencies inherent in undirected activities and disconnected sectors. The NtK Model is a means to realizing increased returns on public investments in those science and technology programs expressly intended to generate beneficial socio-economic impacts. PMID:23414369

Innovation network

PubMed Central

Acemoglu, Daron; Akcigit, Ufuk; Kerr, William R.

2016-01-01

Technological progress builds upon itself, with the expansion of invention in one domain propelling future work in linked fields. Our analysis uses 1.8 million US patents and their citation properties to map the innovation network and its strength. Past innovation network structures are calculated using citation patterns across technology classes during 1975–1994. The interaction of this preexisting network structure with patent growth in upstream technology fields has strong predictive power on future innovation after 1995. This pattern is consistent with the idea that when there is more past upstream innovation for a particular technology class to build on, then that technology class innovates more. PMID:27681628

Research and application of knowledge resources network for product innovation.

PubMed

Li, Chuan; Li, Wen-qiang; Li, Yan; Na, Hui-zhen; Shi, Qian

2015-01-01

In order to enhance the capabilities of knowledge service in product innovation design service platform, a method of acquiring knowledge resources supporting for product innovation from the Internet and providing knowledge active push is proposed. Through knowledge modeling for product innovation based on ontology, the integrated architecture of knowledge resources network is put forward. The technology for the acquisition of network knowledge resources based on focused crawler and web services is studied. Knowledge active push is provided for users by user behavior analysis and knowledge evaluation in order to improve users' enthusiasm for participation in platform. Finally, an application example is illustrated to prove the effectiveness of the method.

Induced innovation, energy prices, and the environment

NASA Astrophysics Data System (ADS)

Popp, David Clifford

The process of developing new technologies is a central question for economic theory as well as for public policy in many areas. For example, the development of cleaner, more efficient energy technologies will play an important role in reducing the threat of global warming. To study how technology evolves over time, this dissertation uses patent data on energy innovations from 1970 to 1991 to examine the impact of energy prices on energy-efficient innovations. Before this can be done, however, information on supply-side factors which influence innovation is also needed. In the case of innovation, supply-side factors are the usefulness of the existing base of scientific knowledge. Patent citations are used for this purpose. Subsequent citations to patents granted each year since 1970 are used to show that the returns to research and development (R&D) fall over time for most of the technologies studied. These estimates are then combined with data on demand-side factors, such as energy prices, to estimate a model of induced innovation in energy technologies. Both energy prices and the supply of knowledge are found to have strongly significant positive effects on innovation. Next, the Yale Technology Concordance (YTC), which maps patents to the industries in which they are used, is employed to construct a stock of energy-related knowledge for 14 energy intensive industries. The effect of changes in this stock on energy consumption in these industries is estimated. On average, the present value of energy savings resulting from a new patent is eight million dollars, with the maximum savings coming about five years after the initial patent application. Finally, the results of each regression are combined to simulate the impact of a ten percent energy tax. Initially, simple factor substitution due to the price change has the largest effect. However, because of the cumulative nature of R&D, induced innovation has a much larger effect than factor substitution in the long run. The evidence in this dissertation suggests that prices play an important role in influencing technological change, and that policy-makers can use this to their advantage in designing appropriate environmental policies.

Toward Sustainable Anticipatory Governance: Analyzing and Assessing Nanotechnology Innovation Processes

NASA Astrophysics Data System (ADS)

Foley, Rider Williams

Cities around the globe struggle with socio-economic disparities, resource inefficiency, environmental contamination, and quality-of-life challenges. Technological innovation, as one prominent approach to problem solving, promises to address these challenges; yet, introducing new technologies, such as nanotechnology, into society and cities has often resulted in negative consequences. Recent research has conceptually linked anticipatory governance and sustainability science: to understand the role of technology in complex problems our societies face; to anticipate negative consequences of technological innovation; and to promote long-term oriented and responsible governance of technologies. This dissertation advances this link conceptually and empirically, focusing on nanotechnology and urban sustainability challenges. The guiding question for this dissertation research is: How can nanotechnology be innovated and governed in responsible ways and with sustainable outcomes? The dissertation: analyzes the nanotechnology innovation process from an actor- and activities-oriented perspective (Chapter 2); assesses this innovation process from a comprehensive perspective on sustainable governance (Chapter 3); constructs a small set of future scenarios to consider future implications of different nanotechnology governance models (Chapter 4); and appraises the amenability of sustainability problems to nanotechnological interventions (Chapter 5). The four studies are based on data collected through literature review, document analysis, participant observation, interviews, workshops, and walking audits, as part of process analysis, scenario construction, and technology assessment. Research was conducted in collaboration with representatives from industry, government agencies, and civic organizations. The empirical parts of the four studies focus on Metropolitan Phoenix. Findings suggest that: predefined mandates and economic goals dominate the nanotechnology innovation process; normative responsibilities identified by risk governance, sustainability-oriented governance, and anticipatory governance are infrequently considered in the nanotechnology innovation process; different governance models will have major impacts on the role and effects of nanotechnology in cities in the future; and nanotechnologies, currently, do not effectively address the root causes of urban sustainability challenges and require complementary solution approaches. This dissertation contributes to the concepts of anticipatory governance and sustainability science on how to constructively guide nanotechnological innovation in order to harvest its positive potential and safeguard against negative consequences.

Structured Innovation of High-Performance Wave Energy Converter Technology: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weber, Jochem W.; Laird, Daniel

Wave energy converter (WEC) technology development has not yet delivered the desired commercial maturity nor, and more importantly, the techno-economic performance. The reasons for this have been recognized and fundamental requirements for successful WEC technology development have been identified. This paper describes a multi-year project pursued in collaboration by the National Renewable Energy Laboratory and Sandia National Laboratories to innovate and develop new WEC technology. It specifies the project strategy, shows how this differs from the state-of-the-art approach and presents some early project results. Based on the specification of fundamental functional requirements of WEC technology, structured innovation and systemic problemmore » solving methodologies are applied to invent and identify new WEC technology concepts. Using Technology Performance Levels (TPL) as an assessment metric of the techno-economic performance potential, high performance technology concepts are identified and selected for further development. System performance is numerically modelled and optimized and key performance aspects are empirically validated. The project deliverables are WEC technology specifications of high techno-economic performance technologies of TPL 7 or higher at TRL 3 with some key technology challenges investigated at higher TRL. These wave energy converter technology specifications will be made available to industry for further, full development and commercialisation (TRL 4 - TRL 9).« less

Cost-effectiveness analysis and innovation.

PubMed

Jena, Anupam B; Philipson, Tomas J

2008-09-01

While cost-effectiveness (CE) analysis has provided a guide to allocating often scarce resources spent on medical technologies, less emphasis has been placed on the effect of such criteria on the behavior of innovators who make health care technologies available in the first place. A better understanding of the link between innovation and cost-effectiveness analysis is particularly important given the large role of technological change in the growth in health care spending and the growing interest of explicit use of CE thresholds in leading technology adoption in several Westernized countries. We analyze CE analysis in a standard market context, and stress that a technology's cost-effectiveness is closely related to the consumer surplus it generates. Improved CE therefore often clashes with interventions to stimulate producer surplus, such as patents. We derive the inconsistency between technology adoption based on CE analysis and economic efficiency. Indeed, static efficiency, dynamic efficiency, and improved patient health may all be induced by the cost-effectiveness of the technology being at its worst level. As producer appropriation of the social surplus of an innovation is central to the dynamic efficiency that should guide CE adoption criteria, we exemplify how appropriation can be inferred from existing CE estimates. For an illustrative sample of technologies considered, we find that the median technology has an appropriation of about 15%. To the extent that such incentives are deemed either too low or too high compared to dynamically efficient levels, CE thresholds may be appropriately raised or lowered to improve dynamic efficiency.

76 FR 70970 - Technology Innovation Program Advisory Board

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-16

... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Technology Innovation Program Advisory Board AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of public meeting. SUMMARY: The Technology Innovation Program (TIP) Advisory Board will...

Innovation Expo

NASA Image and Video Library

2017-10-31

Robert Youngquist, center, Applied Physics Laboratory lead, received a U.S. Patent plaque for his invention, Surface Acoustic Wave Tag-Based Coherence Multiplexing, during the 2017 Innovation Expo at NASA's Kennedy Space Center in Florida. From left, are Kelvin Manning, Kennedy's associate director; Youngquist; and Dave Makufka, Kennedy's Technology Transfer Program manager. The purpose of the annual two-day expo is to help foster innovation and creativity among the Kennedy workforce. The event included several keynote speakers, training opportunities, an innovation showcase and the KSC Kickstart competition.

Needs-Based Innovation in Interventional Radiology: The Biodesign Process.

PubMed

Steinberger, Jonathan D; Denend, Lyn; Azagury, Dan E; Brinton, Todd J; Makower, Josh; Yock, Paul G

2017-06-01

There are many possible mechanisms for innovation and bringing new technology into the marketplace. The Stanford Biodesign innovation process is based in a deep understanding of clinical unmet needs as the basis for focused ideation and development. By identifying and vetting a compelling unmet need, the aspiring innovator can "derisk" a project and maximize chances for successful development in an increasingly challenging regulatory and economic environment. As a specialty founded by tinkerers, with a history of disruptive innovation that has yielded countless new ways of delivering care with minimal invasiveness, lower morbidity, and lower cost, interventional radiologists are uniquely well positioned to identify unmet needs and develop novel solutions free of dogmatic convention. Copyright © 2017 Elsevier Inc. All rights reserved.

A University's Strategic Adoption Process of an PBL-Aligned eLearning Environment: An Exploratory Case Study

ERIC Educational Resources Information Center

Blackburn, Greg

2017-01-01

Much has been written about the promise and peril of technology in education. This paper presents an empirical study that explores how technology can play a pivotal role in student learning and how teaching staff can adopt innovative technology-based approaches in the creation of interactive online problem-based learning (PBL) resources, allowing…

Technological Innovation and Strategic Human Resource Management: Developing a Theory.

ERIC Educational Resources Information Center

Gattiker, Urs E.

Technological innovation affects the structure and content of jobs. Research indicates that there is a need for a theory of technological innovation and strategic human resource management considering several factors, such as an employee's beliefs about the effect of technological innovations on the quality of work life and work content.…

Innovative Technology in Automotive Technology

ERIC Educational Resources Information Center

Gardner, John

2007-01-01

Automotive Technology combines hands-on training along with a fully integrated, interactive, computerized multistationed facility. Our program is a competency based, true open-entry/open-exit program that utilizes flexible self-paced course outlines. It is designed around an industry partnership that promotes community and economic development,…

Technology-Supported Change: A Staff Development Opportunity.

ERIC Educational Resources Information Center

Bradshaw, Lynn K.

1997-01-01

Implementing technology in a classroom is a personal process that varies from teacher to teacher. The Concerns-Based Adoption Model identifies seven stages of concern that teachers may experience, from awareness to refocusing ideas. Innovative staff development strategies include establishing organizational structures to support technological and…

Innovative technologies for powder metallurgy-based disk superalloys: Progress and proposal

NASA Astrophysics Data System (ADS)

Chong-Lin, Jia; Chang-Chun, Ge; Qing-Zhi, Yan

2016-02-01

Powder metallurgy (PM) superalloys are an important class of high temperature structural materials, key to the rotating components of aero engines. In the purview of the present challenges associated with PM superalloys, two novel approaches namely, powder preparation and the innovative spray-forming technique (for making turbine disk) are proposed and studied. Subsequently, advanced technologies like electrode-induction-melting gas atomization (EIGA), and spark-plasma discharge spheroidization (SPDS) are introduced, for ceramic-free superalloy powders. Presently, new processing routes are sought after for preparing finer and cleaner raw powders for disk superalloys. The progress of research in spray-formed PM superalloys is first summarized in detail. The spray-formed superalloy disks specifically exhibit excellent mechanical properties. This paper reviews the recent progress in innovative technologies for PM superalloys, with an emphasis on new ideas and approaches, central to the innovation driving techniques like powder processing and spray forming. Project supported by the National Natural Science Foundation of China (Grant Nos. 50974016 and 50071014).

Innovative Organization of Project Activity of Construction Students

NASA Astrophysics Data System (ADS)

Stolbova, I. D.; Aleksandrova, E. P.; Krainova, M. N.

2017-11-01

The construction industry competitiveness depends on its equipping with information modeling technologies. This requires training and development of human resources. The advantages of BIM-technologies are considered. The requirements for the specialists capable of promoting information modeling technologies in the construction industry are discussed. For a wide application of BIM-technologies, the problem of training personnel with a new thinking must be solved. When preparing graduates of the major “Construction”, it is necessary to introduce innovative educational technologies aimed at building the students’ ability for team work, competences in the field of modern information and communication technologies, as well as design skills basing on spatial modeling. Graphic training is the first discipline of the professional orientation for construction students. In the context of training it is important to create such learning environment that is close to a professional one. The paper provides the examples of practice-oriented assignments based on the project method in the course of students’ independent work.

7 CFR 1466.27 - Conservation Innovation Grants (CIG).

Code of Federal Regulations, 2011 CFR

2011-01-01

... lead to the transfer of conservation technologies, management systems, and innovative approaches (such... to stimulate the development and adoption of innovative conservation approaches and technologies... focus. Applications for CIG should demonstrate the use of innovative approaches and technologies to...

University Researchers Contributing to Technology Markets 1900-85. A Long-Term Analysis of Academic Patenting in Finland

ERIC Educational Resources Information Center

Kaataja, Sampsa

2011-01-01

Regardless of the increased interest in technological innovation in universities, relatively little is known about the technology developed by academic scientists. Long-term analyses of researchers' technological contribution are notably missing. This paper examines university-based technology in Finland during the period 1900-85. The focus is on…

Applied technology center business plan and market survey

NASA Technical Reports Server (NTRS)

Hodgin, Robert F.; Marchesini, Roberto

1990-01-01

Business plan and market survey for the Applied Technology Center (ATC), computer technology transfer and development non-profit corporation, is presented. The mission of the ATC is to stimulate innovation in state-of-the-art and leading edge computer based technology. The ATC encourages the practical utilization of late-breaking computer technologies by firms of all variety.

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM - TECHNOLOGY PROFILES 4th Edition

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program evaluates new and promising treatment technologies for cleanup of hazardous waste sites. The program was created to encourage the development and routine use of innovative treatment technologies. As a result, the SI...

Innovating Education and Educating for Innovation: The Power of Digital Technologies and Skills

ERIC Educational Resources Information Center

OECD Publishing, 2016

2016-01-01

OECD's Innovation Strategy calls upon all sectors in the economy and society to innovate in order to foster productivity, growth and well-being. Education systems are critically important for innovation through the development of skills that nurture new ideas and technologies. However, whereas digital technologies are profoundly changing the way…

Development and Evaluation of a Computerized Engagement Intervention for IPS Supported Employment

ERIC Educational Resources Information Center

Haslett, William R.

2013-01-01

Background: Current information technology offers the promise of innovative approaches to engagement for mental health. Specific psychosocial services may also benefit from technology-based engagement interventions. Individual Placement and Support (IPS) is an evidence-based service that helps people who have a severe mental illness to gain…

Project-Based Learning in Electronic Technology: A Case Study

ERIC Educational Resources Information Center

Li, Li

2015-01-01

A case study of project-based learning (PBL) implemented in Tianjin University of Technology and Education is presented. This multidiscipline project is innovated to meet the novel requirements of industry while keeping its traditional effectiveness in driving students to apply knowledge to practice and problem-solving. The implementation of PBL…

Technology innovation for infectious diseases in the developing world.

PubMed

So, Anthony D; Ruiz-Esparza, Quentin

2012-10-25

Enabling innovation and access to health technologies remains a key strategy in combating infectious diseases in low- and middle-income countries (LMICs). However, a gulf between paying markets and the endemicity of such diseases has contributed to the dearth of R&D in meeting these public health needs. While the pharmaceutical industry views emerging economies as potential new markets, most of the world's poorest bottom billion now reside in middle-income countries--a fact that has complicated tiered access arrangements. However, product development partnerships--particularly those involving academic institutions and small firms--find commercial opportunities in pursuing even neglected diseases; and a growing pharmaceutical sector in BRICS countries offers hope for an indigenous base of innovation. Such innovation will be shaped by 1) access to building blocks of knowledge; 2) strategic use of intellectual property and innovative financing to meet public health goals; 3) collaborative norms of open innovation; and 4) alternative business models, some with a double bottom line. Facing such resource constraints, LMICs are poised to develop a new, more resource-effective model of innovation that holds exciting promise in meeting the needs of global health.

Innovation processes in technologies for the processing of refractory mineral raw materials

NASA Astrophysics Data System (ADS)

Chanturiya, V. A.

2008-12-01

Analysis of the grade of mineral resources of Russia and other countries shows that end products that are competitive in terms of both technological and environmental criteria in the world market can only be obtained by the development and implementation of progressive technologies based on the up-to-date achievements of fundamental sciences. The essence of modern innovation processes in technologies developed in Russia for the complex and comprehensive processing of refractory raw materials with a complex composition is ascertained. These processes include (i) radiometric methods of concentration of valuable components, (ii) high-energy methods of disintegration of highly dispersed mineral components, and (iii) electrochemical methods of water conditioning to obtain target products for solving specific technological problems.

Technology and Literacy: 21st Century Library Programming for Children and Teens

ERIC Educational Resources Information Center

Nelson, Jennifer; Braafladt, Keith

2012-01-01

Technology may not be a magic wand, but innovative technology programming can genuinely help children become adept at navigating our increasingly wired world while also helping them develop deductive reasoning, math, and other vital literacy skills. One of the simplest and most powerful tools for technology-based public library programming is…

The Superfund Innovative Technology Evaluation Program SUMMARY AND CLOSURE REPORT

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program promoted the development, commercialization, and implementation of innovative hazardous waste treatment technologies for 20 years. SITE offered a mechanism for conducting joint technology demonstration and evaluation ...

Faster is more different: mean-field dynamics of innovation diffusion.

PubMed

Baek, Seung Ki; Durang, Xavier; Kim, Mina

2013-01-01

Based on a recent model of paradigm shifts by Bornholdt et al., we studied mean-field opinion dynamics in an infinite population where an infinite number of ideas compete simultaneously with their values publicly known. We found that a highly innovative society is not characterized by heavy concentration in highly valued ideas: Rather, ideas are more broadly distributed in a more innovative society with faster progress, provided that the rate of adoption is constant, which suggests a positive correlation between innovation and technological disparity. Furthermore, the distribution is generally skewed in such a way that the fraction of innovators is substantially smaller than has been believed in conventional innovation-diffusion theory based on normality. Thus, the typical adoption pattern is predicted to be asymmetric with slow saturation in the ideal situation, which is compared with empirical data sets.

Understanding the Emergence of Disruptive Innovation in Air Force Science and Technology Organizations

DTIC Science & Technology

2008-03-01

respect to various key attributes. Although the principles of low-end and new market disruption play the most significant role in the fluid and...crucial role in the emergence of breakthrough and game changing ideas. By examining these key elements with regard to industry innovation, a base...that help define the key characteristics of an innovative culture: strong customer focus, collaboration, effective processes , creative people

When the user is not the chooser: learning from stakeholder involvement in technology adoption decisions in infection control.

PubMed

Ahmad, R; Kyratsis, Y; Holmes, A

2012-07-01

Health systems need efficient and effective innovation decisions to provide maximum benefit to patients, particularly in a climate of financial constraints. Although evidence-based innovations exist for helping to address healthcare-associated infections, the uptake and implementation of these is highly variable and in some cases very slow. To investigate innovation adoption decisions and implementation processes from an organizational perspective, focusing on the implications of stakeholder involvement during the innovation process. Thirty-eight technology adoption decisions and implementation processes were examined through 121 qualitative interviews in 12 National Health Service healthcare organizations across England. Stakeholder involvement varied across organizations with decisions highly exclusive to the infection prevention and control (IPC) team, to highly inclusive of wider organizational members. The context, including organizational culture, previous experience, and logistical factors influenced the level of stakeholder engagement. The timing of stakeholder involvement in the process impacted on: (i) the range of innovations considered; (ii) the technologies selected, and (iii) the success of technology implementation. Cases of non-adoption, discontinued adoption, and of successful implementation are presented to share learning. The potential benefits of stakeholder involvement for 'successful' innovation adoption are presented including a goal-oriented framework for involvement. Key stakeholder involvement can lead to innovation adoption and implementation compatible with structural and cultural contexts, particularly when involvement crosses the phases of initiation, decision-making and implementation. Involving members of the wider healthcare organization can raise the profile of IPC and reinforce efforts to make IPC everybody's business. Copyright © 2012 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

In the Shadow of Schumpeter: W. Rupert Maclaurin and the Study of Technological Innovation

ERIC Educational Resources Information Center

Godin, Benoit

2008-01-01

J. Schumpeter is a key figure, even a seminal one, on technological innovation. Most economists who study technological innovation refer to Schumpeter and his pioneering role in introducing innovation into economic studies. However, despite having brought forth the concept of innovation in economic theory, Schumpeter provided few if any analyses…

Innovative hazard detection and avoidance strategy for autonomous safe planetary landing

NASA Astrophysics Data System (ADS)

Jiang, Xiuqiang; Li, Shuang; Tao, Ting

2016-09-01

Autonomous hazard detection and avoidance (AHDA) is one of the key technologies for future safe planetary landing missions. In this paper, we address the latest progress on planetary autonomous hazard detection and avoidance technologies. First, the innovative autonomous relay hazard detection and avoidance strategy adopted in Chang'e-3 lunar soft landing mission and its flight results are reported in detail. Second, two new conceptual candidate schemes of hazard detection and avoidance are presented based on the Chang'e-3 AHDA system and the latest developing technologies for the future planetary missions, and some preliminary testing results are also given. Finally, the related supporting technologies for the two candidate schemes above are analyzed.

The impact of science and technology on the civilization.

PubMed

Arber, Werner

2009-01-01

The rapid increase of available scientific knowledge is largely due to the introduction of novel research strategies. The application of these strategies, both in fundamental and in translational scientific research, leads to bursts of technological innovations. In order to fulfill the justified public request for sustainability of technological innovations that contribute to the shaping of the future, increasing attention should be given to science-based technology and policy assessment. These requests are illustrated by benefit/risk evaluations of relevance for the use of genetic engineering as an efficient and effective research strategy. Expected benefits of a responsibly planned introduction of GM crops are outlined as a prospective example for the guiding theme "Biotechnology for sustainability of human society".

[Information technologies: new partners in treating diabetes].

PubMed

Colombet, I; Chatellier, G

2001-10-15

The management of chronic diseases such as diabetes is becoming a crucial issue in developed countries. Innovative communication technologies should now be included as new partners in the health care system. These technologies can help both in managing patients and measuring quality of care. Internet-based health promotion programs may improve compliance with treatment. Decision systems are available on the Net to help patients monitoring their diet and insulin doses. The use of electronic medical record shared on Internet may help both physicians and patients to monitor on the long term the effect of interventions. It is now time to perform appropriate trials to determine, beside other interventions, the precise role of innovative communication technologies in diabetes management.

Technology Implementation in Education--Identifying Barriers to Fidelity

ERIC Educational Resources Information Center

Dennis, William J.; Johnson, Daniel L.; Monroe, Arla K.

2012-01-01

This report describes a problem-based learning project focused on determining the barriers to the implementation of technological innovations. Research findings offered evidence that properly executed technology implementation is an instructional variable related to student achievement; yet, school district leaders are faced with the problem of…

Technology Implementation in Education--Identifying Barriers to Fidelity

ERIC Educational Resources Information Center

Monroe, Arla K.; Dennis, William J.; Johnson, Daniel L.

2012-01-01

This report describes a problem-based learning project focused on determining the barriers to the implementation of technological innovations. that properly executed technology implementation is an instructional variable related to student achievement; yet, school district leaders are faced with the problem of recognizing and identifying the…

New Tools for Design

ERIC Educational Resources Information Center

Halliburton, Cal; Roza, Victoria

2006-01-01

Technology educators are constantly in search of new tools and methods to enhance the education of their students. This article is an excerpt from a longer article published in "The Technology Teacher" that introduced the technology education community to a research- and knowledge-based methodology for design--invention and innovation. This…

1992 UPDATE OF U.S. EPA'S SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION (SITE) EMERGING TECHNOLOGY PROGRAM

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Emerging Technology Program (ETP) has encouraged and financially supported further development of bench- and pilot-scale testing and evaluation of innovative technologies suitable for use at hazardous waste sites for five year...

Matching Jobs, People, and Instructional Content: An Innovative Application of a Latent Semantic Analysis-Based Technology

DTIC Science & Technology

2003-03-01

information technologies that can: (a) represent knowledge and skills, (b) identify people with all or parts of the knowledge and task experience...needed but lacked, A might be at too advanced a level for the 8 individual to understand given his or her previous knowledge , B might overlap too...SEMANTIC ANALYSIS-BASED TECHNOLOGY Darrell Laham Knowledge Analysis Technologies 4940 Pearl East Circle #200 Boulder, CO 80301 Winston

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION (SITE) PROGRAM ANNUAL REPORT TO CONGRESS 2003

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program has successfully promoted the development, commercialization and implementation of innovative hazardous waste treatment technologies for 17 years. SITE offers a mechanism for conducting joint technology demonstration a...

The Superfund Innovative Technology Evaluation Program Annual Report to Congress FY2004

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program has successfully promoted the development, commercialization, and implementation of innovative hazardous waste treatment technologies for 18 years. SITE offers a mechanism for conducting joint technology demonstration ...

Step-by-Step: A Model for Practice-Based Learning

ERIC Educational Resources Information Center

Kane, Gabrielle M.

2007-01-01

Introduction: Innovative technology has led to high-precision radiation therapy that has dramatically altered the practice of radiation oncology. This qualitative study explored the implementation of this innovation into practice from the perspective of the practitioners in a large academic radiation medicine program and aimed to improve…

Genetics Curriculum Materials for the 21st Century

ERIC Educational Resources Information Center

Dawson, Vaille; Carson, Katherine; Venville, Grady

2010-01-01

The purpose of this project was to provide innovative and cutting edge genetics materials for 14-17 year olds (Year 10-12) in Australian schools, which aimed to engage students and encourage evidence based decision-making. In 2008, an Australian School Innovation in Science, Technology and Mathematics (ASISTM) project called "Genetics…

Review 2000: The Challenge of Knowledge and Know-How.

ERIC Educational Resources Information Center

Science and Technology Policy Council of Finland, Helsinki.

The public sector in Finland faces tasks and challenges in promoting science, technology, and innovations in conditions of global change. Sustainable economic, social, and cultural development will continue to demand comprehensive development of the innovation system based on solid cooperation between the public and private sectors in the country.…

What Core Competencies Are Related to Teachers' Innovative Teaching?

ERIC Educational Resources Information Center

Zhu, Chang; Wang, Di; Cai, Yonghong; Engels, Nadine

2013-01-01

The purpose of this study is to investigate teachers' core competencies in relation to their innovative teaching performance. Based on the literature and previous studies in this field, four competencies (learning competency, educational competency, social competency and technological competency) are theorised as core competencies for teachers'…

Integrating Blended Teaching and Learning to Enhance Graduate Attributes

ERIC Educational Resources Information Center

Hermens, Antoine; Clarke, Elizabeth

2009-01-01

Purpose: The purpose of this paper is to explore the role of computer based business simulations in higher education as innovative tools of teaching and learning to enhance students' practical understanding of real business problems. Whether the integration of business simulation technologies will enable significant innovation in teaching and…

Effects of government incentives on wind innovation in the United States

NASA Astrophysics Data System (ADS)

Horner, Nathaniel; Azevedo, Inês; Hounshell, David

2013-12-01

In the United States, as elsewhere, state and federal governments have considered or implemented a range of policies to create more sustainable energy generation systems in response to concerns over climate change, security of fuel supply, and environmental impacts. These policies include both regulatory instruments such as renewable portfolio standards (RPSs) and market incentives such as tax credits. While these policies are primarily geared towards increasing renewable generation capacity, they can indirectly affect innovation in associated technologies through a ‘demand-pull’ dynamic. Other policies, such as public research and development (R&D) funding, directly incentivize innovation through ‘technology-push’ means. In this letter, we examine these effects on innovation in the United States wind energy industry. We estimate a set of econometric models relating a set of US federal and state policies to patenting activity in wind technologies over the period 1974-2009. We find that RPS policies have had significant positive effects on wind innovation, whereas tax-based incentives have not been particularly effective. We also find evidence that the effects of RPS incentives differ between states. Finally, we find that public R&D funding can be a significant driver of wind innovation, though its effect in the US has been modest.

77 FR 38678 - NASA Advisory Council; Technology and Innovation Committee; Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-28

... and Innovation Committee; Meeting AGENCY: National Aeronautics and Space Administration. ACTION... National Aeronautics and Space Administration (NASA) announces a meeting of the Technology and Innovation... access badge to enter GSFC and must state that they are attending the NAC's Technology and Innovation...

Medical mobile technologies – what is needed for a sustainable and scalable implementation on a global scale?

PubMed Central

Lundin, Johan; Dumont, Guy

2017-01-01

ABSTRACT Current advances within medical technology show great potential from a global health perspective. Inexpensive, effective solutions to common problems within diagnostics, medical procedures and access to medical information are emerging within almost all fields of medicine. The innovations can benefit health care both in resource-limited and in resource-rich settings. However, there is a big gap between the proof-of-concept stage and implementation. This article will give examples of promising solutions, with special focus on mobile image- and sensor-based diagnostics. We also discuss how technology and frugal innovations could be made sustainable and widely available. Finally, a list of critical factors for success is presented, based on both our own experiences and the literature. PMID:28838308

Smart Manufacturing.

PubMed

Davis, Jim; Edgar, Thomas; Graybill, Robert; Korambath, Prakashan; Schott, Brian; Swink, Denise; Wang, Jianwu; Wetzel, Jim

2015-01-01

Historic manufacturing enterprises based on vertically optimized companies, practices, market share, and competitiveness are giving way to enterprises that are responsive across an entire value chain to demand dynamic markets and customized product value adds; increased expectations for environmental sustainability, reduced energy usage, and zero incidents; and faster technology and product adoption. Agile innovation and manufacturing combined with radically increased productivity become engines for competitiveness and reinvestment, not simply for decreased cost. A focus on agility, productivity, energy, and environmental sustainability produces opportunities that are far beyond reducing market volatility. Agility directly impacts innovation, time-to-market, and faster, broader exploration of the trade space. These changes, the forces driving them, and new network-based information technologies offering unprecedented insights and analysis are motivating the advent of smart manufacturing and new information technology infrastructure for manufacturing.

DEMONSTRATION AND EVALUATION OF INNOVATIVE REMEDIATION TECHNOLOGIES THROUGH THE EPA SITE PROGRAM

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program has successfuly promoted the development, commercialization and implementation of innovative hazardous waste treatment technologies for 18 years. SITE offers a mechanism for conducting joint technology demonstration an...

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM ANNUAL REPORT TO CONGRESS FY 1996

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program has been successfully promoting the development, commercialization and implementation of innovative hazardous waste treatment technologies for more than 10 years. SITE offers a mechanism for conducting joint technology...

THE SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM ANNUAL REPORT TO CONGRESS FY1999

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program has successfully promoted the development, commercialization and implementation of innovative hazardous waste treatment technologies for more than 14 years. SITE offers a mechanism for conducting joint technology demon...

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM TECHNOLOGY PROFILES: SIXTH EDITION

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program evaluates new and promising treatment and monitoring and measurement technologies for cleanup of hazardous waste sites. The program was created to encourage the development and routine use of innovative treatment techn...

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM - TECHNOLOGY PROFILES - SEVENTH EDITION

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program evaluates new and promising treatment and monitoring and measurement technologies for cleanup of hazardous waste sites. The program was created to encourage the development and routine use of innovative treatment techn...

Examining Music Teachers' Self-Confidence Levels in Using Information and Communication Technologies for Education Based on Measurable Variables

ERIC Educational Resources Information Center

Kilic, Deniz Beste Çevik

2017-01-01

Rapid developments and innovations in technology have impact on individuals. The use of technology for one's daily life has become a necessity; therefore, the development and popularization of Information and Communication Technologies (ICTs) is use as a tool for solving educational problems. Because educational technologies play a major role both…

Research and Application of Knowledge Resources Network for Product Innovation

PubMed Central

Li, Chuan; Li, Wen-qiang; Li, Yan; Na, Hui-zhen; Shi, Qian

2015-01-01

In order to enhance the capabilities of knowledge service in product innovation design service platform, a method of acquiring knowledge resources supporting for product innovation from the Internet and providing knowledge active push is proposed. Through knowledge modeling for product innovation based on ontology, the integrated architecture of knowledge resources network is put forward. The technology for the acquisition of network knowledge resources based on focused crawler and web services is studied. Knowledge active push is provided for users by user behavior analysis and knowledge evaluation in order to improve users' enthusiasm for participation in platform. Finally, an application example is illustrated to prove the effectiveness of the method. PMID:25884031

Integration of problem-based learning and innovative technology into a self-care course.

PubMed

McFalls, Marsha

2013-08-12

To assess the integration of problem-based learning and technology into a self-care course. Problem-based learning (PBL) activities were developed and implemented in place of lectures in a self-care course. Students used technology, such as computer-generated virtual patients and iPads, during the PBL sessions. Students' scores on post-case quizzes were higher than on pre-case quizzes used to assess baseline knowledge. Student satisfaction with problem-based learning and the use of technology in the course remained consistent throughout the semester. Integrating problem-based learning and technology into a self-care course enabled students to become active learners.

Practice-centred evaluation and the privileging of care in health information technology evaluation.

PubMed

Darking, Mary; Anson, Rachel; Bravo, Ferdinand; Davis, Julie; Flowers, Steve; Gillingham, Emma; Goldberg, Lawrence; Helliwell, Paul; Henwood, Flis; Hudson, Claire; Latimer, Simon; Lowes, Paul; Stirling, Ian

2014-06-05

Our contribution, drawn from our experience of the case study provided, is a protocol for practice-centred, participative evaluation of technology in the clinical setting that privileges care. In this context 'practice-centred' evaluation acts as a scalable, coordinating framework for evaluation that recognises health information technology supported care as an achievement that is contingent and ongoing. We argue that if complex programmes of technology-enabled service innovation are understood in terms of their contribution to patient care and supported by participative, capability-building evaluation methodologies, conditions are created for practitioners and patients to realise the potential of technologies and make substantive contributions to the evidence base underpinning health innovation programmes. Electronic Patient Records (EPRs) and telemedicine are positioned by policymakers as health information technologies that are integral to achieving improved clinical outcomes and efficiency savings. However, evaluating the extent to which these aims are met poses distinct evaluation challenges, particularly where clinical and cost outcomes form the sole focus of evaluation design. We propose that a practice-centred approach to evaluation - in which those whose day-to-day care practice is altered (or not) by the introduction of new technologies are placed at the centre of evaluation efforts - can complement and in some instances offer advantages over, outcome-centric evaluation models. We carried out a regional programme of innovation in renal services where a participative approach was taken to the introduction of new technologies, including: a regional EPR system and a system to support video clinics. An 'action learning' approach was taken to procurement, pre-implementation planning, implementation, ongoing development and evaluation. Participants included clinicians, technology specialists, patients and external academic researchers. Whilst undergoing these activities we asked: how can a practice-centred approach be embedded into evaluation of health information technologies? Organising EPR and telemedicine evaluation around predetermined outcome measures alone can be impractical given the complex and contingent nature of such projects. It also limits the extent to which unforeseen outcomes and new capabilities are recognised. Such evaluations often fail to improve understanding of 'when' and 'under what conditions' technology-enabled service improvements are realised, and crucially, how such innovation improves care. Our contribution, drawn from our experience of the case study provided, is a protocol for practice-centred, participative evaluation of technology in the clinical setting that privileges care. In this context 'practice-centred' evaluation acts as a scalable, coordinating framework for evaluation that recognises health information technology supported care as an achievement that is contingent and ongoing. We argue that if complex programmes of technology-enabled service innovation are understood in terms of their contribution to patient care and supported by participative, capability-building evaluation methodologies, conditions are created for practitioners and patients to realise the potential of technologies and make substantive contributions to the evidence base underpinning health innovation programmes.

77 FR 40646 - NASA Advisory Council; Technology and Innovation Committee; Meeting Amendment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-10

... and Innovation Committee; Meeting Amendment AGENCY: National Aeronautics and Space Administration... meeting of the Technology and Innovation Committee of the NASA Advisory Council (NAC). DATES: Tuesday... that they are attending the NAC's Technology and Innovation Committee meeting in Building 8. All U.S...

INNOVATIVE TECHNOLOGY EVALUATION REPORT: RADIO FREQUENCY HEATING, KAI TECHNOLOGIES, INC.

EPA Science Inventory

A demonstration of KAI Technologies in-situ radio frequency heating system for soil treatment was conducted from January 1994 to July 1994 at Kelly Air Force Base in San Antonio, Texas. This demonstration was conducted as a joint effort between the USEPA and the USAF. The technol...

Familiarity with Technology among First-Year Students in Rwandan Tertiary Education

ERIC Educational Resources Information Center

Byungura, Jean Claude; Hansson, Henrik; Muparasi, Mugabe; Ruhinda, Ben

2018-01-01

The more the students get experienced with technologies, the more the need for tertiary education systems to adopt innovative pedagogical strategies for accommodating different learning needs. Depending on students' prior experience with computer-based tools, they may have different degrees of familiarity with new technologies. At University of…

Technological Advances in the Treatment of Trauma: A Review of Promising Practices

ERIC Educational Resources Information Center

Paul, Lisa A.; Hassija, Christina M.; Clapp, Joshua D.

2012-01-01

Given the availability of empirically supported practices for addressing posttraumatic stress disorder and other forms of trauma-related distress, the development and implementation of new technology to deliver these treatments is exciting. Technological innovations in this literature aim to expand availability of empirically based intervention,…

Secondary Teacher Self-Efficacy and Technology Integration

ERIC Educational Resources Information Center

Hale, James Lee

2013-01-01

This dissertation is based on a conceptual framework founded in the plight of the United States in the critical areas of science, technology, engineering, and mathematics, such as student performance, global economy, job opportunities, and technological innovation. Subpar performance can be traced to, among other things, education and specifically…

Shaping innovation in health care: A content analysis of innovation policies in the English NHS, 1948-2015.

PubMed

Farchi, Tomas; Salge, Torsten-Oliver

2017-11-01

Governments around the world seek to design policies that enhance the innovative capacity of public service. Hence, identifying the underlying meanings attributed to innovation concepts in public policies is critical, as these very understandings inform not only the policy discourses, but also the overall institutional landscape regulating innovation activities. This paper examines such fundamental definitional aspects in the specific context of the National Health Service in England. For this purpose, it traces the evolution of the innovation concept in policy discourse based on the analysis of 21 key policy documents published or commissioned by the English Department of Health between 1948 and 2015. Systematic analysis of these texts reveals that policymakers' conception of healthcare innovation broadened considerably over time. English health innovation policy initially focused on basic biomedical research. Subsequently, it entered a transitional period, zeroing in on science- and technology-based innovation. Finally, this focus gradually shifted to a broader conception of innovation translating into health, economic, and service design benefits. Copyright © 2017 Elsevier Ltd. All rights reserved.

[Medical doctors driving technological innovation: questions about and innovation management approaches to incentive structures for lead users].

PubMed

Bohnet-Joschko, Sabine; Kientzler, Fionn

2010-01-01

Management science defines user-generated innovations as open innovation and lead user innovation. The medical technology industry finds user-generated innovations profitable and even indispensable. Innovative medical doctors as lead users need medical technology innovations in order to improve patient care. Their motivation to innovate is mostly intrinsic. But innovations may also involve extrinsic motivators such as gain in reputation or monetary incentives. Medical doctors' innovative activities often take place in hospitals and are thus embedded into the hospital's organisational setting. Hospitals find it difficult to gain short-term profits from in-house generated innovations and sometimes hesitate to support them. Strategic investment in medical doctors' innovative activities may be profitable for hospitals in the long run if innovations provide first-mover competitive advantages. Industry co-operations with innovative medical doctors offer chances but also bear potential risks. Innovative ideas generated by expert users may result in even higher complexity of medical devices; this could cause mistakes when applied by less specialised users and thus affect patient safety. Innovations that yield benefits for patients, medical doctors, hospitals and the medical technology industry can be advanced by offering adequate support for knowledge transfer and co-operation models.

Training of Engineering Personnel for the Innovative Coal Industry: Problems and Ways of Solution

NASA Astrophysics Data System (ADS)

Zaruba, Natalya; Fraltsova, Tamara; Snegireva, Tatyana

2017-11-01

The article is written based on some results of the long-term scientific research of the problem related to the urgent need to find the ways of training personnel for the innovative coal industry in the higher education system. This is due to the fundamental changes in the Russian social and economic conditions: the change in the social system and the owner of the coal industry, the emergence of new technologies in the field of coal mining and processing, and in the management of these processes. At the same time, the system of training specialists for the coal industry in the higher education institutions has largely remained unchanged: technologies and principles of training, scientific approaches and concepts take little account of the changed situation, traditional views of specialists work-ing in the university continue to dominate innovative ideas. Many innovations, especially related to technology and the principles of education, struggle to make their way into the higher education system. The article substantiates the urgency of the problem of training personnel for the innovative coal industry in the higher education system, as well as the importance of scientific analysis of the problem in order to find the ways to solve it.

The exploration and practice of integrated innovation teaching mode in the Applied Optics course

NASA Astrophysics Data System (ADS)

Liu, Dongmei; Zhao, Huifu; Fu, Xiuhua; Zhang, Jing

2017-08-01

In recent years, the Ministry of Education of China attaches great importance to the reform of higher education quality. As an important link in the reform of higher education, curriculum development is bound to promote the development of "quality-centered connotative education". Zhejiang University, Changchun University of Science and Technology, Southern Airlines University and other colleges and universities carried out a full range of close cooperation, proposed integrated innovation teaching mode of the course based on network technology. Based on this model, the course of "Applied Optics" has been practiced for two years. The results show that the integrated innovation teaching mode can fully realize the integration amplification effect among multiple colleges and universities and the depth sharing all types of resources. Based on the principle of co-building and sharing, mutual help, comprehensively improve the teaching quality of domestic related courses and promote the comprehensive development of the curriculum to meet the needs of learning society.

The SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION program - Technology Profiles

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) program was created to evaluate new and promising treatment technologies for cleanup at hazardous waste sites. The mission of the SITE program is to encourage the development and routine use of innovative treatment technologie...

Computer-Based Methods for Collecting Peer Nomination Data: Utility, Practice, and Empirical Support

ERIC Educational Resources Information Center

van den Berg, Yvonne H. M.; Gommans, Rob

2017-01-01

New technologies have led to several major advances in psychological research over the past few decades. Peer nomination research is no exception. Thanks to these technological innovations, computerized data collection is becoming more common in peer nomination research. However, computer-based assessment is more than simply programming the…

Journey to Medieval China: Using Technology-Enhanced Instruction to Develop Content Knowledge and Digital Literacy Skills

ERIC Educational Resources Information Center

Shand, Kristen; Winstead, Lisa; Kottler, Ellen

2012-01-01

Recent innovations in Web-based technology tools have made planning instruction with technology in mind far more doable than in years past. To aid teachers in planning with technology, tools are organized into five broad categories: communication, collaboration, presentation, organization and critical-thinking. The purpose and potential of each…

Transforming the Classroom With Tablet Technology.

PubMed

Sargent, Lana; Miles, Elizabeth

Identifying the most effective models for integrating new technology into the classroom and understanding its effects on educational outcomes are essential for nurse educators. This article describes an educational intervention with tablet technology (iPads) using an innovative case-based learning model in a nursing program. Students reported positive learning outcomes when using the tablet technology for learning course content.

Empowering Technology and POETRY Supporting Scientific Inquiry: Investigating the Motion of a Rebounding Trolley

ERIC Educational Resources Information Center

Urban-Woldron, Hildegard

2012-01-01

The recent implementation of technology in the classroom is probably one of the most challenging innovations that many teachers are having to confront today. Teachers have to develop a knowledge base that goes beyond technology proficiency, into learning about how technology, for example, can be used for various forms of representations of subject…

Research to practice in addiction treatment: key terms and a field-driven model of technology transfer.

PubMed

2011-09-01

The transfer of new technologies (e.g., evidence-based practices) into substance abuse treatment organizations often occurs long after they have been developed and shown to be effective. Transfer is slowed, in part, due to a lack of clear understanding about all that is needed to achieve full implementation of these technologies. Such misunderstanding is exacerbated by inconsistent terminology and overlapping models of an innovation, including its development and validation, dissemination to the public, and implementation or use in the field. For this reason, a workgroup of the Addiction Technology Transfer Center (ATTC) Network developed a field-driven conceptual model of the innovation process that more precisely defines relevant terms and concepts and integrates them into a comprehensive taxonomy. The proposed definitions and conceptual framework will allow for improved understanding and consensus regarding the distinct meaning and conceptual relationships between dimensions of the technology transfer process and accelerate the use of evidence-based practices. Copyright © 2011 Elsevier Inc. All rights reserved.

Enacting Key Skills-Based Curricula in Secondary Education: Lessons from a Technology-Mediated, Group-Based Learning Initiative

ERIC Educational Resources Information Center

Johnston, Keith; Conneely, Claire; Murchan, Damian; Tangney, Brendan

2015-01-01

Bridge21 is an innovative approach to learning for secondary education that was originally conceptualised as part of a social outreach intervention in the authors' third-level institution whereby participants attended workshops at a dedicated learning space on campus focusing on a particular model of technology-mediated group-based learning. This…

Science-based health innovation in Uganda: creative strategies for applying research to development.

PubMed

Kamunyori, Sheila; Al-Bader, Sara; Sewankambo, Nelson; Singer, Peter A; Daar, Abdallah S

2010-12-13

Uganda has a long history of health research, but still faces critical health problems. It has made a number of recent moves towards building science and technology capacity which could have an impact on local health, if innovation can be fostered and harnessed. Qualitative case study research methodology was used. Data were collected through reviews of academic literature and policy documents and through open-ended, face-to-face interviews with 30 people from across the science-based health innovation system, including government officials, researchers in research institutes and universities, entrepreneurs, international donors, and non-governmental organization representatives. Uganda has a range of institutions influencing science-based health innovation, with varying degrees of success. However, the country still lacks a coherent mechanism for effectively coordinating STI policy among all the stakeholders. Classified as a least developed country, Uganda has opted for exemptions from the TRIPS intellectual property protection regime that include permitting parallel importation and providing for compulsory licenses for pharmaceuticals. Uganda is unique in Africa in taking part in the Millennium Science Initiative (MSI), an ambitious though early-stage $30m project, funded jointly by the World Bank and Government of Uganda, to build science capacity and encourage entrepreneurship through funding industry-research collaboration. Two universities - Makerere and Mbarara - stand out in terms of health research, though as yet technology development and commercialization is weak. Uganda has several incubators which are producing low-tech products, and is beginning to move into higher-tech ones like diagnostics. Its pharmaceutical industry has started to create partnerships which encourage innovation. Science-based health product innovation is in its early stages in Uganda, as are policies for guiding its development. Nevertheless, there is political will for the development of STI in Uganda, demonstrated through personal initiatives of the President and the government's willingness to invest heavily for the long term in support of STI through the Millennium Science Initiative. Activities to support technology transfer and private-public collaboration have been put in motion; these need to be monitored, coordinated, and learned from. In the private sector, there are examples of incremental innovation to address neglected diseases driven by entrepreneurial individuals and South-South collaboration. Lessons can be learned from their experience that will help support Ugandan health innovation.

Science-based health innovation in Uganda: creative strategies for applying research to development

PubMed Central

2010-01-01

Background Uganda has a long history of health research, but still faces critical health problems. It has made a number of recent moves towards building science and technology capacity which could have an impact on local health, if innovation can be fostered and harnessed. Methods Qualitative case study research methodology was used. Data were collected through reviews of academic literature and policy documents and through open-ended, face-to-face interviews with 30 people from across the science-based health innovation system, including government officials, researchers in research institutes and universities, entrepreneurs, international donors, and non-governmental organization representatives. Results Uganda has a range of institutions influencing science-based health innovation, with varying degrees of success. However, the country still lacks a coherent mechanism for effectively coordinating STI policy among all the stakeholders. Classified as a least developed country, Uganda has opted for exemptions from the TRIPS intellectual property protection regime that include permitting parallel importation and providing for compulsory licenses for pharmaceuticals. Uganda is unique in Africa in taking part in the Millennium Science Initiative (MSI), an ambitious though early-stage $30m project, funded jointly by the World Bank and Government of Uganda, to build science capacity and encourage entrepreneurship through funding industry-research collaboration. Two universities – Makerere and Mbarara – stand out in terms of health research, though as yet technology development and commercialization is weak. Uganda has several incubators which are producing low-tech products, and is beginning to move into higher-tech ones like diagnostics. Its pharmaceutical industry has started to create partnerships which encourage innovation. Conclusions Science-based health product innovation is in its early stages in Uganda, as are policies for guiding its development. Nevertheless, there is political will for the development of STI in Uganda, demonstrated through personal initiatives of the President and the government’s willingness to invest heavily for the long term in support of STI through the Millennium Science Initiative. Activities to support technology transfer and private-public collaboration have been put in motion; these need to be monitored, coordinated, and learned from. In the private sector, there are examples of incremental innovation to address neglected diseases driven by entrepreneurial individuals and South-South collaboration. Lessons can be learned from their experience that will help support Ugandan health innovation. PMID:21144076

Study of Technological Improvements in Automobile Fuel Consumption : Volume 2. Comprehensive Discussion.

DOT National Transportation Integrated Search

1974-12-01

A study was conducted to determine the potential reduction in automotive fuel consumption based on the use of innovative systems and improved components. Technological areas investigated were: spark ignited engines with and without turbocharging, ele...

Study of Technological Improvements in Automobile Fuel Consumption : Volume 1. Executive Summary.

DOT National Transportation Integrated Search

1974-02-01

A study was conducted to determine the potential reduction in automotive fuel consumption based on the use of innovative systems and improved components. Technological areas investigated were: spark ignited engines with and without turbocharging, ele...

Health technology assessment, value-based decision making, and innovation.

PubMed

Henshall, Chris; Schuller, Tara

2013-10-01

Identifying treatments that offer value and value for money is becoming increasingly important, with interest in how health technology assessment (HTA) and decision makers can take appropriate account of what is of value to patients and to society, and in the relationship between innovation and assessments of value. This study summarizes points from an Health Technology Assessment International (HTAi) Policy Forum discussion, drawing on presentations, discussions among attendees, and background papers. Various perspectives on value were considered; most place patient health at the core of value. Wider elements of value comprise other benefits for: patients; caregivers; the health and social care systems; and society. Most decision-making systems seek to take account of similar elements of value, although they are assessed and combined in different ways. Judgment in decisions remains important and cannot be replaced by mathematical approaches. There was discussion of the value of innovation and of the effects of value assessments on innovation. Discussion also included moving toward "progressive health system decision making," an ongoing process whereby evidence-based decisions on use would be made at various stages in the technology lifecycle. Five actions are identified: (i) development of a general framework for the definition and assessment of value; development by HTA/coverage bodies and regulators of (ii) disease-specific guidance and (iii) further joint scientific advice for industry on demonstrating value; (iv) development of a framework for progressive licensing, usage, and reimbursement; and (v) promoting work to better adapt HTA, coverage, and procurement approaches to medical devices.

Marginalization of end-use technologies in energy innovation for climate protection

NASA Astrophysics Data System (ADS)

Wilson, Charlie; Grubler, Arnulf; Gallagher, Kelly S.; Nemet, Gregory F.

2012-11-01

Mitigating climate change requires directed innovation efforts to develop and deploy energy technologies. Innovation activities are directed towards the outcome of climate protection by public institutions, policies and resources that in turn shape market behaviour. We analyse diverse indicators of activity throughout the innovation system to assess these efforts. We find efficient end-use technologies contribute large potential emission reductions and provide higher social returns on investment than energy-supply technologies. Yet public institutions, policies and financial resources pervasively privilege energy-supply technologies. Directed innovation efforts are strikingly misaligned with the needs of an emissions-constrained world. Significantly greater effort is needed to develop the full potential of efficient end-use technologies.

Malaysia Collaborates with the New York Academy of Sciences to Develop an Innovation-Based Economy

PubMed Central

Wahome, Michel; Rubinstein, Ellis

2011-01-01

If Malaysia is to become a high-income country by 2020, it will have to transform into a knowledge-based, innovation economy. This goal will be achieved by developing an atmosphere conducive to experimentation and entrepreneurship at home; while reaching out to partners across the globe. One of Malaysia’s newest partnerships is with the New York Academy of Sciences. The Academy has expertise in innovation and higher education and a long history of promoting science, education, and science-based solutions through a global network of scientists, industry-leaders, and policy-makers. Malaysia’s Prime Minister, Dato’ Sri Mohd Najib Tun Abdul Razak, leveraged the Academy’s network to convene a science, technology, and innovation advisory council. This council would provide practical guidance to establish Malaysia as an innovation-based economy. Three initial focus areas, namely palm-oil biomass utilisation, establishment of smart communities, and capacity building in science and engineering, were established to meet short-term and long-term targets. PMID:22135594

Malaysia collaborates with the new york academy of sciences to develop an innovation-based economy.

PubMed

Wahome, Michel; Rubinstein, Ellis

2011-07-01

If Malaysia is to become a high-income country by 2020, it will have to transform into a knowledge-based, innovation economy. This goal will be achieved by developing an atmosphere conducive to experimentation and entrepreneurship at home; while reaching out to partners across the globe. One of Malaysia's newest partnerships is with the New York Academy of Sciences. The Academy has expertise in innovation and higher education and a long history of promoting science, education, and science-based solutions through a global network of scientists, industry-leaders, and policy-makers. Malaysia's Prime Minister, Dato' Sri Mohd Najib Tun Abdul Razak, leveraged the Academy's network to convene a science, technology, and innovation advisory council. This council would provide practical guidance to establish Malaysia as an innovation-based economy. Three initial focus areas, namely palm-oil biomass utilisation, establishment of smart communities, and capacity building in science and engineering, were established to meet short-term and long-term targets.

Developing critical thinking, creativity and innovation skills of undergraduate students

NASA Astrophysics Data System (ADS)

Shoop, Barry L.

2014-07-01

A desirable goal of engineering education is to teach students how to be creative and innovative. However, the speed of technological innovation and the continual expansion of disciplinary knowledge leave little time in the curriculum for students to formally study innovation. At West Point we have developed a novel upper-division undergraduate course that develops the critical thinking, creativity and innovation of undergraduate science and engineering students. This course is structured as a deliberate interactive engagement between students and faculty that employs the Socratic method to develop an understanding of disruptive and innovative technologies and a historical context of how social, cultural, and religious factors impact the acceptance or rejection of technological innovation. The course begins by developing the background understanding of what disruptive technology is and a historical context about successes and failures of social, cultural, and religious acceptance of technological innovation. To develop this framework, students read The Innovator's Dilemma by Clayton M. Christensen, The Structure of Scientific Revolutions by Thomas S. Kuhn, The Discoverers by Daniel J. Boorstin, and The Two Cultures by C.P. Snow. For each class meeting, students survey current scientific and technical literature and come prepared to discuss current events related to technological innovation. Each student researches potential disruptive technologies and prepares a compelling argument of why the specific technologies are disruptive so they can defend their choice and rationale. During course meetings students discuss the readings and specific technologies found during their independent research. As part of this research, each student has the opportunity to interview forward thinking technology leaders in their respective fields of interest. In this paper we will describe the course and highlight the results from teaching this course over the past five years.

Teaching technological innovation and entrepreneurship in polymeric biomaterials.

PubMed

Washburn, Newell R

2011-01-01

A model for incorporating an entrepreneurship module has been developed in an upper-division and graduate-level engineering elective on Polymeric Biomaterials (27-311/42-311/27-711/42-711) at Carnegie Mellon University. A combination of lectures, assignments, and a team-based project were used to provide students with a framework for applying their technical skills in the development of new technologies and a basic understanding of the issues related to translational research and technology commercialization. The specific approach to the project established in the course, which represented 20% of the students' grades, and the grading rubric for each of the milestones are described along with suggestions for generalizing this approach to different applications of biomaterials or other engineering electives. Incorporating this model of entrepreneurship into electives teaches students course content within the framework of technological innovation and many of the concepts and tools need to practice it. For students with situational or individual interest in the project, it would also serve to deepen their understanding of the traditional course components as well as provide a foundation for integrating technological innovation and lifelong learning. Copyright © 2010 Wiley Periodicals, Inc.

Teaching Technological Innovation and Entrepreneurship in Polymeric Biomaterials

PubMed Central

Washburn, Newell R.

2010-01-01

A model for incorporating an entrepreneurship module has been developed in an upper-division and graduate-level engineering elective on Polymeric Biomaterials (27-311/42-311/27-711/42-711) at Carnegie Mellon University. A combination of lectures, assignments, and a team-based project were used to provide students with a framework for applying their technical skills in the development of new technologies and a basic understanding of the issues related to translational research and technology commercialization. The specific approach to the project established in the course, which represented 20% of the students’ grades, and the grading rubric for each of the milestones are described along with suggestions for generalizing this approach to different applications of biomaterials or other engineering electives. Incorporating this model of entrepreneurship into electives teaches students course content within the framework of technological innovation and many of the concepts and tools need to practice it. For students with situational or individual interest in the project, it would also serve to deepen their understanding of the traditional course components as well as provide a foundation for integrating technological innovation and lifelong learning. PMID:20949575

Which One Triggers the Other? Technological or Social Innovation

ERIC Educational Resources Information Center

Bulut, Cagri; Eren, Hakan; Halac, Duygu Seckin

2013-01-01

The term "innovation" has sometimes been used as a synonym for technological innovation until the concept of "social innovation" attracted academic attention. Since then, these two types of innovation have been investigated individually. It can be claimed that, despite the great importance of social innovation studies,…

Innovative Web-Based Professional Development for Teachers of At-Risk Preschool Children

ERIC Educational Resources Information Center

Kinzie, Mable B.; Whitaker, Stephen D.; Neesen, Kathy; Kelley, Michael; Matera, Michael; Pianta, Robert C.

2006-01-01

Research suggests the importance of professional development for teachers of at-risk children, and while educational technologies can be harnessed to help support teaching practice in innovative ways, such programs are often limited in scale. "My Teaching Partner (MTP)" was designed to deliver a targeted program of professional…

Pardon the Disruption ... Innovation Changes How We Think about Higher Education

ERIC Educational Resources Information Center

DiSalvio, Philip

2012-01-01

This article illustrates the landscape-changing potential of the "disruptive innovation" taking place on the shores of the Charles River. Learning technologies now being used in the massive open online course (MOOC) movement, some suggest, will change the way people think about higher education. MOOCs are based on an open-networked learning…

Analysis of Competencies, Job Satisfaction and Organizational Commitment as Indicators of Job Performance: A Conceptual Framework

ERIC Educational Resources Information Center

Khan, Asad; Masrek, Mohamad Noorman; Nadzar, Fuziah Mohamad

2015-01-01

Like other disciplines, organizational and technological innovations have influenced the standard philosophies of librarianship. These innovations have changed the basics of information retrieval and delivery in libraries. As a result, library authorities are demanding competency-based job performance. Nonetheless, there is a scarcity of research…

Using Microcomputer-Based Logistics Models to Enhance Supportability Assessment for the USAF Productivity, Reliability, Availability and Maintainability (PRAM) Program Office: A Tailored Approach

DTIC Science & Technology

1989-09-01

goes on to discuss how the innovation process should function within an organization, including five specific phases for successfully managing ... innovation : the recognition of opportunity; idea formulation; product defin- ition; prototype solution; and finally, technology utiliza- tion and diffusion

Demand-pull and environmental innovations: Estimating the effects of innovative public procurement.

PubMed

Ghisetti, Claudia

2017-12-01

This paper contributes to the emerging literature on the adoption of environmental innovation, by investigating the so far unexplored role of governmental demand in stimulating 'greener' production choices. Specifically, the role of innovative public procurement in driving the adoption and diffusion of sustainable manufacturing technologies is analysed. Results, based on firm-level data in the 28 Member States of the European Union, Switzerland and the USA, are obtained through non-parametric matching techniques. Those outline the crucial role of innovative public procurement in the uptake of environmental innovations. This confirms the relevance of such policy instrument in allowing countries to achieve a decarbonised and sustainable growth path which is compatible with competitiveness goals.

A Planning Framework for the Deployment of Innovative Information and Communication Technologies in Procurement

NASA Astrophysics Data System (ADS)

Alard, Robert; Gustafsson, Martin; Nienhaus, Jörg

The management of buyer-supplier relations is a major topic for many enterprises today. Modern Information and Communication Technologies (ICT) offer interesting perspectives on opportunities and implementation approaches. Today, logistics and procurement departments of numerous enterprises are evaluating the possibilities and opportunities of new ICT solutions and especially of internet-based electronic procurement solutions for the optimisation and re-engineering of their buyer-supplier relationships. Due to the highly innovative character of the new ICT solutions and the scarcely available operational examples in the industry, only little guidance exists to support responsible managers during the evaluation, planning and designing of internet-based electronic procurement solutions. This paper describes a framework for the strategic evaluation and planning of the deployment of internet-based procurement solutions for direct materials. The presented approach supports enterprises in the analysis of procurement objects and procurement structuring, in the definition and management of buyer-supplier-relationships, in the requirements analysis of ICT solutions as well as the assessment of the potential to support procurement with innovative ICT and internet-based electronic procurement solutions.

The successes and challenges of open-source biopharmaceutical innovation.

PubMed

Allarakhia, Minna

2014-05-01

Increasingly, open-source-based alliances seek to provide broad access to data, research-based tools, preclinical samples and downstream compounds. The challenge is how to create value from open-source biopharmaceutical innovation. This value creation may occur via transparency and usage of data across the biopharmaceutical value chain as stakeholders move dynamically between open source and open innovation. In this article, several examples are used to trace the evolution of biopharmaceutical open-source initiatives. The article specifically discusses the technological challenges associated with the integration and standardization of big data; the human capacity development challenges associated with skill development around big data usage; and the data-material access challenge associated with data and material access and usage rights, particularly as the boundary between open source and open innovation becomes more fluid. It is the author's opinion that the assessment of when and how value creation will occur, through open-source biopharmaceutical innovation, is paramount. The key is to determine the metrics of value creation and the necessary technological, educational and legal frameworks to support the downstream outcomes of now big data-based open-source initiatives. The continued focus on the early-stage value creation is not advisable. Instead, it would be more advisable to adopt an approach where stakeholders transform open-source initiatives into open-source discovery, crowdsourcing and open product development partnerships on the same platform.

Innovating With Rehabilitation Technology in the Real World: Promises, Potentials, and Perspectives.

PubMed

Chua, Karen Sui Geok; Kuah, Christopher Wee Keong

2017-10-01

In this article, we discuss robotic-assisted therapy as an emerging and significant field of clinical rehabilitation and its value proposition for innovating rehabilitation clinical practice. Attempts to achieve integration among clinicians' practices and bioengineers' machines often generate new challenges and controversies. To date, the literature is indicative of a sizeable number and variety of robotic devices in the field of clinical rehabilitation, some are commercially available; however, large-scale clinical outcomes are less positive than expected. The following main themes related to integrating rehabilitation technology in real-world clinical practice will be discussed: the application of current evidence-based practice and knowledge in relation to treatment in the rehabilitation clinic, perspectives from rehabilitation professionals using robotic-aided therapy with regard to challenges, and strategies for problem solving. Lastly, we present innovation philosophies with regard to sustainability of clinical rehabilitation technologies.

Innovating With Rehabilitation Technology in the Real World

PubMed Central

Chua, Karen Sui Geok; Kuah, Christopher Wee Keong

2017-01-01

Abstract In this article, we discuss robotic-assisted therapy as an emerging and significant field of clinical rehabilitation and its value proposition for innovating rehabilitation clinical practice. Attempts to achieve integration among clinicians' practices and bioengineers' machines often generate new challenges and controversies. To date, the literature is indicative of a sizeable number and variety of robotic devices in the field of clinical rehabilitation, some are commercially available; however, large-scale clinical outcomes are less positive than expected. The following main themes related to integrating rehabilitation technology in real-world clinical practice will be discussed: the application of current evidence-based practice and knowledge in relation to treatment in the rehabilitation clinic, perspectives from rehabilitation professionals using robotic-aided therapy with regard to challenges, and strategies for problem solving. Lastly, we present innovation philosophies with regard to sustainability of clinical rehabilitation technologies. PMID:28708632

Innovative medical devices and hospital decision making: a study comparing the views of hospital pharmacists and physicians.

PubMed

Billaux, Mathilde; Borget, Isabelle; Prognon, Patrice; Pineau, Judith; Martelli, Nicolas

2016-06-01

Objectives Many university hospitals have developed local health technology assessment processes to guide informed decisions about new medical devices. However, little is known about stakeholders' perceptions and assessment of innovative devices. Herein, we investigated the perceptions regarding innovative medical devices of their chief users (physicians and surgeons), as well as those of hospital pharmacists, because they are responsible for the purchase and management of sterile medical devices. We noted the evaluation criteria used to assess and select new medical devices and suggestions for improving local health technology assessment processes indicated by the interviewees. Methods We randomly selected 18 physicians and surgeons (nine each) and 18 hospital pharmacists from 18 French university hospitals. Semistructured interviews were conducted between October 2012 and August 2013. Responses were coded separately by two researchers. Results Physicians and surgeons frequently described innovative medical devices as 'new', 'safe' and 'effective', whereas hospital pharmacists focused more on economic considerations and considered real innovative devices to be those for which no equivalent could be found on the market. No significant difference in evaluation criteria was found between these groups of professionals. Finally, hospital pharmacists considered the management of conflicts of interests in local health technology assessment processes to be an issue, whereas physicians and surgeons did not. Conclusions The present study highlights differences in perceptions related to professional affiliation. The findings suggest several ways in which current practices for local health technology assessment in French university hospitals could be improved and studied. What is known about the topic? Hospitals are faced with ever-growing demands for innovative and costly medical devices. To help hospital management deal with technology acquisition issues, hospital-based health technology assessment has been developed to support decisions. However, little is known about the different perceptions of innovative medical devices among practitioners and how different perceptions may affect decision making. What does this paper add? This paper compares and understands the perceptions of two groups of health professionals concerning innovative devices in the university hospital environment. What are the implications for practitioners? Such a comparison of viewpoints could facilitate improvements in current practices and decision-making processes in local health technology assessment for these medical products.

New technologies and surgical innovation: five years of a local health technology assessment program in a surgical department.

PubMed

Poulin, Paule; Austen, Lea; Kortbeek, John B; Lafrenière, René

2012-06-01

There is pressure for surgical departments to introduce new and innovative health technologies in an evidence-based manner while ensuring that they are safe and effective and can be managed with available resources. A local health technology assessment (HTA) program was developed to systematically integrate research evidence with local operational management information and to make recommendations for subsequent decision by the departmental executive committee about whether and under what conditions the technology will be used. The authors present a retrospective analysis of the outcomes of this program as used by the Department of Surgery & Surgical Services in the Calgary Health Region over a 5-year period from December 2005 to December 2010. Of the 68 technologies requested, 15 applications were incomplete and dropped, 12 were approved, 3 were approved for a single case on an urgent/emergent basis, 21 were approved for "clinical audit" for a restricted number of cases with outcomes review, 14 were approved for research use only, and 3 were referred to additional review bodies. Subsequent outcome reports resulted in at least 5 technologies being dropped for failure to perform. Decisions based on local HTA program recommendations were rarely "yes" or "no." Rather, many technologies were given restricted approval with full approval contingent on satisfying certain conditions such as clinical outcomes review, training protocol development, or funding. Thus, innovation could be supported while ensuring safety and effectiveness. This local HTA program can be adapted to a variety of settings and can help bridge the gap between evidence and practice.

Technology Empowerment: Security Challenges.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Warren, Drake Edward; Backus, George A.; Jones, Wendell

“Technology empowerment” means that innovation is increasingly accessible to ordinary people of limited means. As powerful technologies become more affordable and accessible, and as people are increasingly connected around the world, ordinary people are empowered to participate in the process of innovation and share the fruits of collaborative innovation. This annotated briefing describes technology empowerment and focuses on how empowerment may create challenges to U.S. national security. U.S. defense research as a share of global innovation has dwindled in recent years. With technology empowerment, the role of U.S. defense research is likely to shrink even further while technology empowerment willmore » continue to increase the speed of innovation. To avoid falling too far behind potential technology threats to U.S. national security, U.S. national security institutions will need to adopt many of the tools of technology empowerment.« less

Unmet needs: relevance to medical technology innovation?

PubMed

McCarthy, Avril D; Sproson, Lise; Wells, Oliver; Tindale, Wendy

2014-01-01

This paper describes and discusses the role of unmet needs in the innovation of new medical technologies using the National Institute for Health Research Devices for Dignity (D4D) Healthcare Technology Co-operative as a case study. It defines an unmet need, providing a spectrum of classification and discusses the benefits and the challenges of identifying unmet need and its influence on the innovation process. The process by which D4D has captured and utilized unmet needs to drive technology innovation is discussed and examples given. It concludes by arguing that, despite the challenges, defining and reviewing unmet need is a fundamental factor in the success of medical technology innovation.

National Responses to Technological Innovations in Weapon Systems, 1815 to the Present

DTIC Science & Technology

1986-01-07

CONTENTS Pane Preface Introduction 1 I. Technology of the Industrial Revolution 4 II. Innovative Technologies of the Early Twentieth Century 18 III...focuses on the period from 1815 to the present, from the beginning of the Industrial Revolution to the latest developments in military technology...TECHNOLOGY OF THE INDUSTRIAL REVOLUTION Technological innovation has influenced warfare since antiquity. But the development of new- technology and

47 CFR 32.2 - Basis of the accounts.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., because of the anticipated effects of future innovations, the telecommunications plant accounts are intended to permit technological distinctions. Similarly, the primary bases of plant operations, customer... technological view of the telecommunications industry. This view will provide a stable and consistent foundation...

7 CFR 3430.201 - Purpose.

Code of Federal Regulations, 2013 CFR

2013-01-01

... address the critical needs of the specialty crop industry by developing and disseminating science-based... over the long term (including specialty crop policy and marketing). (4) New innovations and technology, including improved mechanization and technologies that delay or inhibit ripening. (5) Methods to prevent...

7 CFR 3430.201 - Purpose.

Code of Federal Regulations, 2012 CFR

2012-01-01

... address the critical needs of the specialty crop industry by developing and disseminating science-based... over the long term (including specialty crop policy and marketing). (4) New innovations and technology, including improved mechanization and technologies that delay or inhibit ripening. (5) Methods to prevent...

7 CFR 3430.201 - Purpose.

Code of Federal Regulations, 2014 CFR

2014-01-01

... address the critical needs of the specialty crop industry by developing and disseminating science-based... over the long term (including specialty crop policy and marketing). (4) New innovations and technology, including improved mechanization and technologies that delay or inhibit ripening. (5) Methods to prevent...

Innovation management based on proactive engagement of customers: A case study on LEGO Group. Part I: Innovation Management at Lego Group

NASA Astrophysics Data System (ADS)

Rusu, G.; Avasilcăi, S.

2015-11-01

Customers' proactive engagement in the innovation process represents a business priority for companies which adopt the open innovation business model. In such a context, it is of outmost importance for companies to use the online environment and social media, in order to create an interactive and open dialogue with customers and other important external stakeholders, achieving to gather creative solutions and innovative ideas by involving them in the process of co-creating value. Thus, the current paper is based on a case study approach, which aims to highlight the open innovation business model of the LEGO Group, one of the most successful and active company in engaging customers in submitting ideas and creative solutions for developing new products and new technologies, through online platforms. The study then proceeds to analyze the innovation management at LEGO Group, emphasizing the most important elements regarding the management team, the success and failures, the evolution of the LEGO products focusing on the innovation efforts of the company, its mission, vision, and values, emphasizing the innovation terms which guide the actions and objectives of the LEGO Group. Also, the research based on the case study approach, outlines the most important policies and strategies of the company, the organizational structure consisting of flat structures which facilitate the orientation of the team management on the innovation process and the proactive involvement of consumers and other external stakeholders in product development, highlighting also the most important activities developed by the management team in exploring the new opportunities which may occur on the market, involving customers in sharing their ideas at festivals, participating to discussions of adult fans on web-based platforms and establishing partnerships with the external stakeholders in order to create value. Moreover, the paper is focused on identifying the company's concerns regarding the competitive strategies, new technologies developed for sustainable development and innovation, emphasizing also the concerns of the LEGO Group for a long-term orientation strategy which implies developing innovative products, made by ecological materials, reducing the negative impact on the environment. In addition, the company aims to foster innovation maintaining a clear vision, multiple contacts with the internal and external environment, and the flat structures which enable the communication between innovative management teams and top management team. Consequently, the study provides the insights regarding the innovation management of the LEGO Group, emphasizing the role of engaging customers and other external stakeholders in the co-creation of value.

Innovation Best Practices in the Medical Device Industry.

PubMed

Ray, Partha P; Amaral, Joseph F; Hinoul, Piet

2017-06-01

Advances in patient care often germinate from keen clinical insights and a needs-based approach to innovation. Although there is an important role for incremental improvements to existing solutions, transformational innovation is what truly drives real shifts in clinical outcomes and subsequently patient satisfaction, market access, and economic value. A good example of this is the evolution of the coronary stent market. The best innovation programs are focused on unmet needs rather than solutions, call for a careful articulation of the specific problems to be solved, involve a deep dive within a clinical area, and seek to prioritize research and development investments into areas where the greatest impact can be expected. To enhance its ability to pursue breakthrough innovation, Johnson and Johnson (J&J) has organized itself along priority disease areas, created the global J&J Innovation organization to pursue external technology and know-how, and continues to partner closely with clinical practitioners. The process undertaken at J&J to acquire a microwave ablation technology and enter the interventional oncology space is a recent case study of these innovation principles and organizational focus in action. Copyright © 2017 Elsevier Inc. All rights reserved.

Technology innovation for infectious diseases in the developing world

PubMed Central

2012-01-01

Enabling innovation and access to health technologies remains a key strategy in combating infectious diseases in low- and middle-income countries (LMICs). However, a gulf between paying markets and the endemicity of such diseases has contributed to the dearth of R&D in meeting these public health needs. While the pharmaceutical industry views emerging economies as potential new markets, most of the world’s poorest bottom billion now reside in middle-income countries--a fact that has complicated tiered access arrangements. However, product development partnerships--particularly those involving academic institutions and small firms--find commercial opportunities in pursuing even neglected diseases; and a growing pharmaceutical sector in BRICS countries offers hope for an indigenous base of innovation. Such innovation will be shaped by 1) access to building blocks of knowledge; 2) strategic use of intellectual property and innovative financing to meet public health goals; 3) collaborative norms of open innovation; and 4) alternative business models, some with a double bottom line. Facing such resource constraints, LMICs are poised to develop a new, more resource-effective model of innovation that holds exciting promise in meeting the needs of global health. PMID:23849080

Optimising treatment resources for OCD: a review of the evidence base for technology-enhanced delivery.

PubMed

Lovell, Karina; Bee, Penny

2011-12-01

Obsessive-compulsive disorder (OCD) is a chronic and disabling mental health problem. Only a minority of people receive evidence-based psychological treatments, and this deficit has prompted an increasing focus on delivering cognitive behaviour therapy (CBT) in new and innovative ways. To conduct a scoping review of the published evidence base for CBT-based interventions incorporating a health technology in the treatment of OCD. The questions posed by the review were (a) are technology-assisted treatments clinically effective, (b) are patient outcomes durable and (c) are more innovative services deemed acceptable by those individuals who engage in them? Scoping review of published studies using any study design examining CBT interventions incorporating a health technology for OCD. Electronic databases searched included MEDLINE (1966-2010), PsycInfo (1967-2010), EMBASE (1980-2010) and CINAHL databases (1982-2010). Thirteen studies were identified, of these, five used bibliotherapy, five examined computerised CBT (cCBT), two investigated telephone delivered CBT and one evaluated video conferencing. Overall studies were small and methodologically flawed, which precludes definitive conclusions of clinical effectiveness, durability or stakeholder satisfaction. To date the evidence base for technology-enhanced OCD treatments has undergone limited development. Future research should seek to overcome the methodological shortcomings of published work by conducting large-scale trials that incorporate clinical, cost and acceptability outcomes.

Analyzing precautionary regulation: do precaution, science, and innovation go together?

PubMed

Todt, Oliver; Luján, José Luis

2014-12-01

In this article we argue that the precautionary principle, as applied to the regulation of science and technology, cannot be considered in any general manner inconsistent with the norms and methods of scientific knowledge generation and justification. Moreover, it does not necessarily curtail scientific-technological innovation. Our argument flows from a differentiated view of what precaution in regulation means. We first characterize several of the most relevant interpretations given to the precautionary principle in academic debate and regulatory practice. We then use examples of actual precaution-based regulation to show that, even though science can have varying functions in different circumstances and frames, all of those interpretations recur to scientific method and knowledge, and tend to imply innovation in methods, products, and processes. In fact, the interplay of regulation and innovation in precautionary policy, at least in the case of the interpretations of precaution that our analysis takes into account, could be understood as a way of reconciling the two fundamental science and technology policy functions of promotion and control. © 2014 Society for Risk Analysis.

Communicating Biotech Advances: Fiction versus Reality.

PubMed

Małyska, Aleksandra; Bolla, Robert; Twardowski, Tomasz

2018-02-01

Bioscience novels use selected technologies of genetic engineering and synthetic biology to create entertaining stories. These novels are usually based on scientific knowledge, but they may arouse public concerns about technology and drive public reluctance to accept innovative technologies. The scientific community must adopt more efficient communication and transparency. Copyright © 2017 Elsevier Ltd. All rights reserved.

Influences on Visual Spatial Rotation: Science, Technology, Engineering, and Mathematics (STEM) Experiences, Age, and Gender

ERIC Educational Resources Information Center

Perry, Paula Christine

2013-01-01

Science, Technology, Engineering, and Mathematics (STEM) education curriculum is designed to strengthen students' science and math achievement through project based learning activities. As part of a STEM initiative, SeaPerch was developed at Massachusetts Institute of Technology. SeaPerch is an innovative underwater robotics program that instructs…

E-Learning and the Use of New Technologies in the "Kolumbus-Kids" Project in Germany

ERIC Educational Resources Information Center

Wegner, Claas; Homann, Wiebke; Strehlke, Friederike; Borgmann, Annika

2014-01-01

This article presents the science project "Kolumbus-Kids" as an example of the innovative use of "E-Learning" and other "new technologies" to advance student learning and new-media education. The project benefits from various technology-based education strategies and E-Learning scenarios which are employed during the…

The Fusion of Learning Theory and Technology in an Online Music History Course Redesign

ERIC Educational Resources Information Center

Scarnati, Blase; Garcia, Paula

2008-01-01

Teaching today's students requires an integration of learner-centered pedagogy with innovative technological resources. In this article, Blase Scarnati and Paula Garcia describe the redesign of a junior-level music history course guided by learner-centered principles and driven by a fusion of stimulating technology-based learning tools and…

Perspectives on the Integration of Technology and Assessment

ERIC Educational Resources Information Center

Pellegrino, James W.; Quellmalz, Edys S.

2011-01-01

This paper considers uses of technology in educational assessment from the perspective of innovation and support for teaching and learning. It examines assessment cases drawn from contexts that include large-scale testing programs as well as classroom-based programs, and attempts that have been made to harness the power of technology to provide…

A Model for Integrating ICT into Teacher Training Programs in Bangladesh Based on TPCK

ERIC Educational Resources Information Center

Khan, Shahadat Hossain

2014-01-01

Modern technology increasingly creates new challenges in various professional development and practice. However, in teaching, the mere adoption of new or innovative technology is not enough to meet the students' learning needs and opportunities. Technology alone could not sufficiently bring about the desired changes in students' competencies and…

Learning With Technology. Facilitator's Guide, Revised Edition, and Participant's Manual.

ERIC Educational Resources Information Center

Fine, Carole; Tinzmann, Margaret Baker; Anderson, Mary; Anderson, Whit; Pitlik, Deborah

This research-based professional development course is designed by the North Central Regional Educational Laboratory to offer participants ways to connect technology with teaching and learning, and to examine ways to apply technology innovations to instruction and to improving teaching and learning. In the six, 2-hour sessions, participants (who…

Stories about Struggling Readers and Technology

ERIC Educational Resources Information Center

Anderson, Rebecca; Balajthy, Ernest

2009-01-01

Educators have moved on from older models of technology-based education that focused on the attributes and basic uses of the hardware and software available to them. Now they are finding the necessary creative and innovative ways to harness technology's power for school and community educational improvement. In this column, the authors tell four…

Tapping onto the Potential of Smartphone Applications for Psycho-Education and Early Intervention in Addictions.

PubMed

Zhang, Melvyn W B; Ho, Roger C M

2016-01-01

E-health, and in particular smartphone-based technology, is increasingly becoming commonplace in healthcare. While psychiatry has tapped onto these innovations for conditions, such as affective disorders, and schizophrenia and psychosis, the usage of these technologies in addiction is limited. Addiction psychiatry could harness the potential of smartphone technologies. Given the increasing incidences of substance-related problems globally, and along with the normalization of the general public's perspectives toward substances, and also in consideration of unwillingness for at-risk individuals in seeking help, the authors hope to illustrate how these issues could potentially be solved using E-health and technological innovations. The objectives of the current perspective article are to illustrate how recent advances in smartphone-based technologies could help in terms of psycho-education, as well as in helping individuals who are at-risk users in seeking help earlier. The authors aim to illustrate how the above are possible, building on existing theory-driven framework that has been extensively reviewed in the previous literature. Limitations with regard to the implementation of such technologies will also be discussed.

Tapping onto the Potential of Smartphone Applications for Psycho-Education and Early Intervention in Addictions

PubMed Central

Zhang, Melvyn W. B.; Ho, Roger C. M.

2016-01-01

E-health, and in particular smartphone-based technology, is increasingly becoming commonplace in healthcare. While psychiatry has tapped onto these innovations for conditions, such as affective disorders, and schizophrenia and psychosis, the usage of these technologies in addiction is limited. Addiction psychiatry could harness the potential of smartphone technologies. Given the increasing incidences of substance-related problems globally, and along with the normalization of the general public’s perspectives toward substances, and also in consideration of unwillingness for at-risk individuals in seeking help, the authors hope to illustrate how these issues could potentially be solved using E-health and technological innovations. The objectives of the current perspective article are to illustrate how recent advances in smartphone-based technologies could help in terms of psycho-education, as well as in helping individuals who are at-risk users in seeking help earlier. The authors aim to illustrate how the above are possible, building on existing theory-driven framework that has been extensively reviewed in the previous literature. Limitations with regard to the implementation of such technologies will also be discussed. PMID:27014103

MIT Lincoln Laboratory Annual Report 2007: Technology in Support of National Security

DTIC Science & Technology

2007-01-01

technical innovation and scientific discoveries. MISSION: TechnoLogy In SupporT of naTIonaL SecurITy 2007 Dr. Claude R. Canizares Vice president for...problems. The Lincoln Laboratory New Technology Initiatives Program is one of several internal technology innovation mechanisms. Technologies emerging...externships. LIFT2, an innovative professional learning program for science, technology , and math teachers, serves Massachusetts metro south/west region

Human Welfare and Technological Innovation. Open Grants Papers No. 2.

ERIC Educational Resources Information Center

Hayashi, Yujiro

This publication on human welfare and technological innovation contains two sections. The first section examines the objectives and functions of technological innovation while the second section discusses the direction and analysis of technology transfer between Japan and other nations. Subtopics within the first section include: (1)…

40 CFR 1037.610 - Vehicles with innovative technologies.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 33 2014-07-01 2014-07-01 false Vehicles with innovative technologies... § 1037.610 Vehicles with innovative technologies. (a) You may ask us to apply the provisions of this section for CO2 emission reductions resulting from vehicle technologies that were not in common use with...

40 CFR 60.398 - Innovative technology waivers.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 6 2011-07-01 2011-07-01 false Innovative technology waivers. 60.398... Light Duty Truck Surface Coating Operations § 60.398 Innovative technology waivers. (a) General Motors... the emission limits in paragraph (a)(1)(ii)(A) of this section. (v) A technology development report...

40 CFR 1037.610 - Vehicles with innovative technologies.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 34 2013-07-01 2013-07-01 false Vehicles with innovative technologies... § 1037.610 Vehicles with innovative technologies. (a) You may ask us to apply the provisions of this section for CO2 emission reductions resulting from vehicle technologies that were not in common use with...

40 CFR 1037.610 - Vehicles with innovative technologies.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 34 2012-07-01 2012-07-01 false Vehicles with innovative technologies... § 1037.610 Vehicles with innovative technologies. (a) You may ask us to apply the provisions of this section for CO2 emission reductions resulting from vehicle technologies that were not in common use with...

40 CFR 60.398 - Innovative technology waivers.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 7 2012-07-01 2012-07-01 false Innovative technology waivers. 60.398... Light Duty Truck Surface Coating Operations § 60.398 Innovative technology waivers. (a) General Motors... the emission limits in paragraph (a)(1)(ii)(A) of this section. (v) A technology development report...

78 FR 35604 - National Medal of Technology and Innovation Nomination Evaluation Committee Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-13

..., technology, business, and patent law drawn from both the public and private sectors and are appointed by the...] National Medal of Technology and Innovation Nomination Evaluation Committee Meeting AGENCY: United States... Technology and Innovation (NMTI) Nomination Evaluation Committee will meet in closed session on Wednesday...

76 FR 71048 - Sixth Annual Philip S. Chen, Jr. Distinguished Lecture on Innovation and Technology Transfer

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-16

..., Jr. Distinguished Lecture on Innovation and Technology Transfer AGENCY: National Institutes of Health... sixth annual Philip S. Chen, Jr., Ph.D. Distinguished Lecture on Innovation and Technology Transfer... present ``Treatment of Cancer with Recombinant Immunotoxins: From Technology Transfer to the Patient.'' Dr...

40 CFR 60.398 - Innovative technology waivers.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Innovative technology waivers. 60.398... Light Duty Truck Surface Coating Operations § 60.398 Innovative technology waivers. (a) General Motors... the emission limits in paragraph (a)(1)(ii)(A) of this section. (v) A technology development report...

Linear feature extraction from radar imagery: SBIR (Small Business Innovative Research), phase 2, option 2

NASA Astrophysics Data System (ADS)

Milgram, David L.; Kahn, Philip; Conner, Gary D.; Lawton, Daryl T.

1988-12-01

The goal of this effort is to develop and demonstrate prototype processing capabilities for a knowledge-based system to automatically extract and analyze features from Synthetic Aperture Radar (SAR) imagery. This effort constitutes Phase 2 funding through the Defense Small Business Innovative Research (SBIR) Program. Previous work examined the feasibility of and technology issues involved in the development of an automated linear feature extraction system. This final report documents this examination and the technologies involved in automating this image understanding task. In particular, it reports on a major software delivery containing an image processing algorithmic base, a perceptual structures manipulation package, a preliminary hypothesis management framework and an enhanced user interface.

Invention and Innovation: A Standards-Based Middle School Model Course Guide. Advancing Technological Literacy: ITEA Professional Series

ERIC Educational Resources Information Center

International Technology Education Association (ITEA), 2005

2005-01-01

This guide presents a model for a standards-based contemporary technology education course for the middle school. This model course guide features an exploratory curriculum thrust for a cornerstone middle level course. It provides teachers with an overview of the concept, suggestions for planning the course, and ideas for developing…

Technological and Traditional Drawing Approaches Encourage Active Engagement in Histology Classes for Science Undergraduates

ERIC Educational Resources Information Center

Cogdell, Barbara; Torsney, Ben; Stewart, Katherine; Smith, Robert A.

2012-01-01

In order to promote more active engagement of science undergraduates in histology practical classes some technology-based innovations were introduced. First, an interactive pre-lab tutorial was set up using an electronic handset voting system, where guidance on tissue analysis was given. Second, a web-based resource where students could access…

Exploration of Secondary Students' Creativity by Integrating Web-Based Technology into an Innovative Science Curriculum

ERIC Educational Resources Information Center

Jang, Syh-Jong

2009-01-01

The purpose of the study was to investigate how web-based technology could be utilized and integrated with real-life scientific materials to stimulate the creativity of secondary school students. One certified science teacher and 31 seventh graders participated in this study. Several real-life experience science sessions integrated with online…

Case-Based Learning, Pedagogical Innovation, and Semantic Web Technologies

ERIC Educational Resources Information Center

Martinez-Garcia, A.; Morris, S.; Tscholl, M.; Tracy, F.; Carmichael, P.

2012-01-01

This paper explores the potential of Semantic Web technologies to support teaching and learning in a variety of higher education settings in which some form of case-based learning is the pedagogy of choice. It draws on the empirical work of a major three year research and development project in the United Kingdom: "Ensemble: Semantic…

Data-Base Software For Tracking Technological Developments

NASA Technical Reports Server (NTRS)

Aliberti, James A.; Wright, Simon; Monteith, Steve K.

1996-01-01

Technology Tracking System (TechTracS) computer program developed for use in storing and retrieving information on technology and related patent information developed under auspices of NASA Headquarters and NASA's field centers. Contents of data base include multiple scanned still images and quick-time movies as well as text. TechTracS includes word-processing, report-editing, chart-and-graph-editing, and search-editing subprograms. Extensive keyword searching capabilities enable rapid location of technologies, innovators, and companies. System performs routine functions automatically and serves multiple users.

Reflections on different governance styles in regulating science: a contribution to 'Responsible Research and Innovation'.

PubMed

Landeweerd, Laurens; Townend, David; Mesman, Jessica; Van Hoyweghen, Ine

2015-01-01

In European science and technology policy, various styles have been developed and institutionalised to govern the ethical challenges of science and technology innovations. In this paper, we give an account of the most dominant styles of the past 30 years, particularly in Europe, seeking to show their specific merits and problems. We focus on three styles of governance: a technocratic style, an applied ethics style, and a public participation style. We discuss their merits and deficits, and use this analysis to assess the potential of the recently established governance approach of 'Responsible Research and Innovation' (RRI). Based on this analysis, we reflect on the current shaping of RRI in terms of 'doing governance'.

Manufacturing Innovation and Technological Superiority

DTIC Science & Technology

2016-09-01

Defense AT&L: September-October 2016 2 From the Under Secretary of Defense for Acquisit ion, Technology, and Logist ics Manufacturing Innovation ...program to establish Manufacturing Innovation Institutes (MIIs) that would create incubators for advanced manufacturing technology in key

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM: ANNUAL REPORT TO CONGRESS FY 1994

EPA Science Inventory

The U.S. Environmental Protection Agency's (EPA) Superfund Innovative Technology Evaluation (SITE) Program evaluates innovative technologies for the remediation of contaminated Superfund and Resource Conservation and Recovery Act (RCRA) corrective actions sites. Historically t...

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM ANNUAL REPORT TO CONGRESS FY2000

EPA Science Inventory

The Superfund Innovative Technology Evaluation Program promotes the development, commercialization, and implementation of innovative hazardous waste treatment technologies. SITE offers a mechanism for conducting joint demonstration and evaluation projects at hazardous waste site...

Technology Transfer: A Think Tank Approach to Managing Innovation in the Public Sector

DTIC Science & Technology

1985-01-01

TECHNOLOGY TRANSFER: A THINK TANK APPROACH TO MANAGING INNOVATION IN THE PUBLIC SECTOR CISIRIBUTIOtl STATEMENT A Approved for Public Release...NAVAL FACILITIES ENGINEERING COMMAND TECHNOLOGY TRANSFER: A THINK TANK APPROACH TO MANAGING INNOVATION IN THE PUBLIC SECTOR Edited by J. W. Creighton...Publication of this book, Technology Transfer: A Think Tank Approach to Managing Innovation in the Public Sector, was in part supported by funds from the U.S

Coordinating Leader-Follower Supply Chain with Sustainable Green Technology Innovation on Their Fairness Concerns

PubMed Central

Du, Bisheng; Liu, Qing; Li, Guiping

2017-01-01

Sustainable green technology innovation is essential in all the stages of the supply chain development. The members of the supply chain in each stage need to invest in sustainable green technology innovation research and development. However, whether the sustainable green technology innovation investments and profits for all the members are fairness concerned is a critical factor to motivate the supply chain members. Motivated by a real business investigation, in this study, a supply chain model with one supplier and one manufacturer is analyzed. We consider fairness concerns for the supplier and the manufacturer with sustainable green technology innovation development. We derive the optimal results in both with and without fairness concern. The results indicate that fairness concerns can promote and coordinate the supply chain members without advantage inequity averseness, to invest more on their sustainable green technology innovation development. PMID:29117150

Coordinating Leader-Follower Supply Chain with Sustainable Green Technology Innovation on Their Fairness Concerns.

PubMed

Du, Bisheng; Liu, Qing; Li, Guiping

2017-11-08

Sustainable green technology innovation is essential in all the stages of the supply chain development. The members of the supply chain in each stage need to invest in sustainable green technology innovation research and development. However, whether the sustainable green technology innovation investments and profits for all the members are fairness concerned is a critical factor to motivate the supply chain members. Motivated by a real business investigation, in this study, a supply chain model with one supplier and one manufacturer is analyzed. We consider fairness concerns for the supplier and the manufacturer with sustainable green technology innovation development. We derive the optimal results in both with and without fairness concern. The results indicate that fairness concerns can promote and coordinate the supply chain members without advantage inequity averseness, to invest more on their sustainable green technology innovation development.

Sustainable Financing of Innovative Therapies: A Review of Approaches.

PubMed

Hollis, Aidan

2016-10-01

The process of innovation is inherently complex, and it occurs within an even more complex institutional environment characterized by incomplete information, market power, and externalities. There are therefore different competing approaches to supporting and financing innovation in medical technologies, which bring their own advantages and disadvantages. This article reviews value- and cost-based pricing, as well direct government funding, and cross-cutting institutional structures. It argues that performance-based risk-sharing agreements are likely to have little effect on the sustainability of financing; that there is a role for cost-based pricing models in some situations; and that the push towards longer exclusivity periods is likely contrary to the interests of industry.

Interpreting User's Choice of Technologies: A Quantitative Research on Choosing the Best Web-Based Communication Tools

ERIC Educational Resources Information Center

Adebiaye, Richmond

2010-01-01

The proliferation of web-based communication tools like email clients vis-a-vis Yahoo mail, Gmail, and Hotmail have led to new innovations in web-based communication. Email users benefit greatly from this technology, but lack of security of these tools can put users at risk of loss of privacy, including identity theft, corporate espionage, and…

Integration of Problem-based Learning and Innovative Technology Into a Self-Care Course

PubMed Central

2013-01-01

Objective. To assess the integration of problem-based learning and technology into a self-care course. Design. Problem-based learning (PBL) activities were developed and implemented in place of lectures in a self-care course. Students used technology, such as computer-generated virtual patients and iPads, during the PBL sessions. Assessments. Students’ scores on post-case quizzes were higher than on pre-case quizzes used to assess baseline knowledge. Student satisfaction with problem-based learning and the use of technology in the course remained consistent throughout the semester. Conclusion. Integrating problem-based learning and technology into a self-care course enabled students to become active learners. PMID:23966730

Patterns of Innovation in Alzheimer's Disease Drug Development: A Strategic Assessment Based on Technological Maturity.

PubMed

Beierlein, Jennifer M; McNamee, Laura M; Walsh, Michael J; Ledley, Fred D

2015-08-01

This article examines the current status of translational science for Alzheimer's disease (AD) drug discovery by using an analytical model of technology maturation. Previous studies using this model have demonstrated that nascent scientific insights and inventions generate few successful leads or new products until achieving a requisite level of maturity. This article assessed whether recent failures and successes in AD research follow patterns of innovation observed in other sectors. The bibliometric-based Technology Innovation Maturation Evaluation model was used to quantify the characteristic S-curve of growth for AD-related technologies, including acetylcholinesterase, N-methyl-d-aspartate (NMDA) receptors, B-amyloid, amyloid precursor protein, presenilin, amyloid precursor protein secretases, apolipoprotein E4, and transactive response DNA binding protein 43 kDa (TDP-43). This model quantifies the accumulation of knowledge as a metric for technological maturity, and it identifies the point of initiation of an exponential growth stage and the point at which growth slows as the technology is established. In contrast to the long-established acetylcholinesterase and NMDA receptor technologies, we found that amyloid-related technologies reached the established point only after 2000, and that the more recent technologies (eg, TDP-43) have not yet approached this point. The first approvals for new molecular entities targeting acetylcholinesterase and the NMDA receptor occurred an average of 22 years after the respective technologies were established, with only memantine (which was phenotypically discovered) entering clinical trials before this point. In contrast, the 6 lead compounds targeting the formation of amyloid plaques that failed in Phase III trials between 2009 and 2014 all entered clinical trials before the respective target technologies were established. This analysis suggests that AD drug discovery has followed a predictable pattern of innovation in which technological maturity is an important determinant of success in development. Quantitative analysis indicates that the lag in emergence of new products, and the much-heralded clinical failures of recent years, should be viewed in the context of the ongoing maturation of AD-related technologies. Although these technologies were not sufficiently mature to generate successful products a decade ago, they may be now. Analytical models of translational science can inform basic and clinical research results as well as strategic development of new therapeutic products. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Seeds of Innovation: Three Years of the Technology Innovation Challenge Grant Program.

ERIC Educational Resources Information Center

Harris, Larry A.

This publication describes the 62 projects that received 5-year Technology Innovation Challenge Grants beginning in 1995, 1996, and 1997, with reviews of the projects occurring in late 1999 and early 2000. Part 1 of the report describes the Technology Innovation Challenge Grant (TICG) program and its importance. Part 2 contains the project…

Insights on Technology Innovation - A Review of the U.S. Department of Energy Solar Decathlon Competition Entries 2002-2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simon, Joseph J; Doris, Elizabeth S; Farrar, Sara L

The U.S. Department of Energy (DOE) Solar Decathlon is a collegiate competition that challenges student teams to design and build full-size, solar-powered houses. Because of balanced design priorities of architecture, engineering, innovation, performance, and energy use, teams have focused on a range of technologies in the built environment, from wall materials to home control systems, from electric lighting to HVAC equipment, and from geothermal to solar photovoltaic technology. This report provides insights into building technology innovation from a review of the Solar Decathlon competition entry designs, anecdotal experiences, and related market reports. The report describes example case studies of themore » evolution of technology solutions over time to illustrate the innovative, market-driving nature of the Solar Decathlon. It charts technologies utilized in the team designs over seven competitions and compares those to broader market adoption. It is meant to illustrate the technology innovation aspects of the competition, not to be a comprehensive or quantitative analysis. Solar Decathlon also has impacts on public perception of innovative technologies as well as workforce development through the thousands of participating students. The focus of these case studies is to showcase how it contributes to marketplace adoption of innovative energy technologies.« less

Identifying consumer's needs of health information technology through an innovative participatory design approach among English- and Spanish-speaking urban older adults.

PubMed

Lucero, R; Sheehan, B; Yen, P; Velez, O; Nobile-Hernandez, D; Tiase, V

2014-01-01

We describe an innovative community-centered participatory design approach, Consumer-centered Participatory Design (C2PD), and the results of applying C2PD to design and develop a web-based fall prevention system. We conducted focus groups and design sessions with English- and Spanish-speaking community-dwelling older adults. Focus group data were summarized and used to inform the context of the design sessions. Descriptive content analysis methods were used to develop categorical descriptions of design session informant's needs related to information technology. The C2PD approach enabled the assessment and identification of informant's needs of health information technology (HIT) that informed the development of a falls prevention system. We learned that our informants needed a system that provides variation in functions/content; differentiates between actionable/non-actionable information/structures; and contains sensory cues that support wide-ranging and complex tasks in a varied, simple, and clear interface to facilitate self-management. The C2PD approach provides community-based organizations, academic researchers, and commercial entities with a systematic theoretically informed approach to develop HIT innovations. Our community-centered participatory design approach focuses on consumer's technology needs while taking into account core public health functions.

Identifying Consumer’s Needs of Health Information Technology through an Innovative Participatory Design Approach among English- and Spanish-speaking Urban Older Adults

PubMed Central

Sheehan, B.; Yen, P.; Velez, O.; Nobile-Hernandez, D.; Tiase, V.

2014-01-01

Summary Objectives We describe an innovative community-centered participatory design approach, Consumer-centered Participatory Design (C2PD), and the results of applying C2PD to design and develop a web-based fall prevention system. Methods We conducted focus groups and design sessions with English- and Spanish-speaking community-dwelling older adults. Focus group data were summarized and used to inform the context of the design sessions. Descriptive content analysis methods were used to develop categorical descriptions of design session informant’s needs related to information technology. Results The C2PD approach enabled the assessment and identification of informant’s needs of health information technology (HIT) that informed the development of a falls prevention system. We learned that our informants needed a system that provides variation in functions/content; differentiates between actionable/non-actionable information/structures; and contains sensory cues that support wide-ranging and complex tasks in a varied, simple, and clear interface to facilitate self-management. Conclusions The C2PD approach provides community-based organizations, academic researchers, and commercial entities with a systematic theoretically informed approach to develop HIT innovations. Our community-centered participatory design approach focuses on consumer’s technology needs while taking into account core public health functions. PMID:25589909

Study of Technological Improvements in Automobile Fuel Consumption : Volume 3B. Appendixes 4 though 7.

DOT National Transportation Integrated Search

1974-12-01

A study was conducted to determine the potential reduction in automotive fuel consumption based on the use of innovative systems and improved components. Technological areas investigated were: spark ignited engines with and without turbocharging, ele...

Study of Technological Improvements in Automobile Fuel Consumption : Volume 3A. Appendixes 1 through 3

DOT National Transportation Integrated Search

1974-12-01

A study was conducted to determine the potential reduction in automotive fuel consumption based on the use of innovative systems and improved components. Technological areas investigated were: spark ignited engines with and without turbocharging, ele...

Can Technology Help Promote Equality of Educational Opportunities?

ERIC Educational Resources Information Center

Jacob, Brian; Berger, Dan; Hart, Cassandra; Loeb, Susanna

2016-01-01

This chapter assesses the potential for several prominent technological innovations to promote equality of educational opportunities. We review the history of technological innovations in education and describe several prominent innovations, including intelligent tutoring, blended learning, and virtual schooling.

The Innovation Deficit in Urban Water: The Need for an Integrated Perspective on Institutions, Organizations, and Technology.

PubMed

Kiparsky, Michael; Sedlak, David L; Thompson, Barton H; Truffer, Bernhard

2013-08-01

Interaction between institutional change and technological change poses important constraints on transitions of urban water systems to a state that can meet future needs. Research on urban water and other technology-dependent systems provides insights that are valuable to technology researchers interested in assuring that their efforts will have an impact. In the context of research on institutional change, innovation is the development, application, diffusion, and utilization of new knowledge and technology. This definition is intentionally inclusive: technological innovation will play a key role in reinvention of urban water systems, but is only part of what is necessary. Innovation usually depends on context, such that major changes to infrastructure include not only the technological inventions that drive greater efficiencies and physical transformations of water treatment and delivery systems, but also the political, cultural, social, and economic factors that hinder and enable such changes. On the basis of past and present changes in urban water systems, institutional innovation will be of similar importance to technological innovation in urban water reinvention. To solve current urban water infrastructure challenges, technology-focused researchers need to recognize the intertwined nature of technologies and institutions and the social systems that control change.

Unterdruck-Verdampfer-Brunnen (UVB): An in situ system for remediation of contaminated aquifers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simon, M.A.; Argus, R.R.; Hough, B.L.

Traditionally, contaminated groundwater is pumped to a surface facility for treatment, often by air stripping. An innovative technology, the Unterdruck-Verdampfer-Brunnen (UVB), German for Vacuum Vaporizing Well, is an in situ groundwater remediation technology that combines air-lift pumping and air stripping to clean aquifers contaminated with volatile compounds. Additionally, the developer claims that in some cases the technology is capable of simultaneous recovery of soil gas from the vadose zone. An evaluation of this process is discussed in this abstract. The UVB technology is a process patented by IEG mbH in Reutlingen, Germany. IEG Technologies, Inc., located in Charlotte, NC, marketsmore » the technology in North America. IEG teamed with Roy F. Weston, Inc. to demonstrate the UVB technology at March Air Force Base (AFB), CA. March AFB allowed the US EPA Superfund Innovative Technology Evaluation (SITE) program to evaluate the technology. The SITE program retained PRC Environmental, Inc. to evaluate the performance of the UVB system at March.« less

Technological innovation, human capital and social change for sustainability. Lessons learnt from the industrial technologies theme of the EU's Research Framework Programme.

PubMed

Sabadie, Jesús Alquézar

2014-05-15

Europe is facing a twofold challenge. It must maintain or even increase its competitiveness, a basic requirement in a globalised economy and under the current demographic threat. It needs also to tackle the so-called "grand challenges", especially environmental issues, through a sustainable model of production and consumption. Such challenges should lead to new business and industrial models, based on more sustainable production and consumption chains, from design to end of life. This implies a need for new industrial materials and processes, new skills and, indeed, new values and life-styles. Sustainability and innovation are key elements of EU's Research and Innovation Framework Programmes, particularly in the field of industrial technologies (nanotechnologies, materials and industrial technologies), which objective is to "improve the competitiveness of the European industry and generate knowledge to ensure its transformation from a resource intensive to a knowledge intensive industry". Sustainability and innovation are interrelated challenges for R&D. Research can develop technical solutions to tackle environmental or societal challenges, but such technologies need to be successfully commercialised to have a real environmental impact. Several socio-economic studies carried-out by the European Commission show not only the emerging technological and industrial trends, but they also emphasise the need for linking sustainable technologies with social change. Human capital and new social behaviours are critical factors to combine economic competitiveness and sustainability: technology alone is no longer able to solve global challenges. But what kind of human capital (skills, behaviours, and values) are we referring to? How to encourage the shift towards a greener society through human capital? Which reforms are needed in education systems to move towards a sustainable economy? Are there examples of social innovation to be extrapolated and/or generalised? © 2013 Elsevier B.V. All rights reserved.

Analysis of user readiness toward ICT usage at small medium enterprise in south tangerang

NASA Astrophysics Data System (ADS)

Napitupulu, D.; Syafrullah, M.; Rahim, R.; Abdullah, D.; Setiawan, MI

2018-04-01

Utilization of Information and Communication Technology (ICT) is still relatively low in the level of SMEs due to various limitations ranging from access to capital, till the marketing network. ICT is present to provide the ability for SMEs in improving the benefits and competitive advantage of the organization. This study aims to determine the level of readiness of SMEs in utilizing technology, especially ICT. The methodology used is a survey to see the technology readiness of 107 SMEs in South Tangerang selected by purposive sampling. The approach used is TRI (Technology Readiness Index) which is the individual perception of technology based on four criteria that is optimism, innovativeness, discomfort and insecurity. The results showed that the optimism and innovativeness variables significantly positively influence the technology readiness while the variables of discomfort and insecurity also significantly positively influence the readiness of ICT.

Each-One-Teach-One Mobile Networks: An Innovative Strategy for Knowledge Access in Asian Countries

ERIC Educational Resources Information Center

Misra, P. K.

2012-01-01

The changing landscape of learning is helping Asian countries to emerge as technology-driven knowledge-based societies. The success of these societies depends on promoting the acquisition of key competences and broadening opportunities for innovative and more flexible forms of learning for every citizen. Considering that in Asia almost everyone…

Increasing Early Opportunities in Engineering for Advanced Learners in Elementary Classrooms: A Review of Recent Literature

ERIC Educational Resources Information Center

Dailey, Debbie; Cotabish, Alicia; Jackson, Nykela

2018-01-01

Present and future challenges in our society demand a solid science, technology, engineering, and mathematics (STEM) knowledge base, innovative thinking, and the ability to ask the right questions to generate multiple solutions. To prepare innovators to meet these challenges, we must recognize and develop their talents. This advancement and growth…

A Case Study for Comparing the Effectiveness of a Computer Simulation and a Hands-on Activity on Learning Electric Circuits

ERIC Educational Resources Information Center

Ekmekci, Adem; Gulacar, Ozcan

2015-01-01

Science education reform emphasizes innovative and constructivist views of science teaching and learning that promotes active learning environments, dynamic instructions, and authentic science experiments. Technology-based and hands-on instructional designs are among innovative science teaching and learning methods. Research shows that these two…

Cognitive Analysis of Meaning and Acquired Mental Representations as an Alternative Measurement Method Technique to Innovate E-Assessment

ERIC Educational Resources Information Center

Morales-Martinez, Guadalupe Elizabeth; Lopez-Ramirez, Ernesto Octavio; Castro-Campos, Claudia; Villarreal-Treviño, Maria Guadalupe; Gonzales-Trujillo, Claudia Jaquelina

2017-01-01

Empirical directions to innovate e-assessments and to support the theoretical development of e-learning are discussed by presenting a new learning assessment system based on cognitive technology. Specifically, this system encompassing trained neural nets that can discriminate between students who successfully integrated new knowledge course…

[New drug development by innovative drug administration--"change" in pharmaceutical field].

PubMed

Nagai, T

1997-11-01

New drug development can be made by providing products of higher "selectivity for the drug" for medical treatment. There are two ways for the approach to get higher "selectivity of drug": 1) discovery of new compounds with high selectivity of drug; 2) innovation of new drug administration, that is new formulation and/or method with high selectivity of drug by integration and harmonization of various hard/soft technologies. An extensive increase of biological information and advancement of surrounding science and technology may modify the situation as the latter overcomes the former in the 21 century. As the science and technology in the 21 century is said to be formed on "3H", that is, 1. hybrid; 2. hi-quality; 3. husbandry, the new drug development by innovative drug administration is exactly based on the science and technology of 3H. Its characteristic points are interdisciplinary/interfusion, international, of philosophy/ethics, and systems of hard/hard/heart. From these points of view, not only the advance of unit technology but also a revolution in thinking way should be "must" subjects. To organize this type of research well, a total research activity such as ROR (research on research) might take an important and efficient role. Here the key words are the "Optimization technology" and "Change in Pharmaceutical Fields." As some examples of new drug innovation, our trials on several topical mucosal adhesive dosage forms and parenteral administration of peptide drugs such as insulin and erythropoietin will be described.

Open Pit Mine 3d Mapping by Tls and Digital Photogrammetry: 3d Model Update Thanks to a Slam Based Approach

NASA Astrophysics Data System (ADS)

Vassena, G.; Clerici, A.

2018-05-01

The state of the art of 3D surveying technologies, if correctly applied, allows to obtain 3D coloured models of large open pit mines using different technologies as terrestrial laser scanner (TLS), with images, combined with UAV based digital photogrammetry. GNSS and/or total station are also currently used to geo reference the model. The University of Brescia has been realised a project to map in 3D an open pit mine located in Botticino, a famous location of marble extraction close to Brescia in North Italy. Terrestrial Laser Scanner 3D point clouds combined with RGB images and digital photogrammetry from UAV have been used to map a large part of the cave. By rigorous and well know procedures a 3D point cloud and mesh model have been obtained using an easy and rigorous approach. After the description of the combined mapping process, the paper describes the innovative process proposed for the daily/weekly update of the model itself. To realize this task a SLAM technology approach is described, using an innovative approach based on an innovative instrument capable to run an automatic localization process and real time on the field change detection analysis.

Advanced technology care innovation for older people in Italy: necessity and opportunity to promote health and wellbeing.

PubMed

Lattanzio, Fabrizia; Abbatecola, Angela M; Bevilacqua, Roberta; Chiatti, Carlos; Corsonello, Andrea; Rossi, Lorena; Bustacchini, Silvia; Bernabei, Roberto

2014-07-01

Even though there is a constant and accelerating growth of the aging population worldwide, such a rapid rise is negatively impacting available home and community services not able to encompass the necessities associated with the increased number of older people. In particular, there are increasing demands on e-health care services and smart technologies needed for frail elders with chronic diseases and also for those experiencing active aging. Advanced Technology Care Innovation for older persons encompasses all sectors (assistive technology, robotics, home automation, and home care- and institution-based healthcare monitoring, telemedicine) dedicated to promoting health and wellbeing in all types of living environments. Considering that there is a large concern and demand by older persons to remain in familiar social living surroundings, study projects joined with industries have been currently initiated, especially across Europe to improve health and wellbeing. This article will highlight the latest updates in Europe and, in particular in Italy, regarding scientific projects dedicated to unraveling how diverse needs can be translated into an up-to-date technology innovation for the growing elder population. We will provide information regarding advanced technology designed for those with specific geriatric-correlated conditions in familiar living settings and for individuals aging actively. This is an important action because numerous emerging developments are based on user needs identified by geriatricians, thus, underlining the indispensable role of geriatric medicine toward future guidelines on specific technology. Copyright © 2014 AMDA – The Society for Post-Acute and Long-Term Care Medicine. Published by Elsevier Inc. All rights reserved.

Innovation in sexually transmitted disease and HIV prevention: internet and mobile phone delivery vehicles for global diffusion.

PubMed

Swendeman, Dallas; Rotheram-Borus, Mary Jane

2010-03-01

Efficacious behavioral interventions and practices have not been universally accepted, adopted, or diffused by policy makers, administrators, providers, advocates, or consumers. Biomedical innovations for sexually transmitted disease (STD) and HIV prevention have been embraced but their effectiveness is hindered by behavioral factors. Behavioral interventions are required to support providers and consumers for adoption and diffusion of biomedical innovations, protocol adherence, and sustained prevention for other STDs. Information and communication technology such as the Internet and mobile phones can deliver behavioral components for STD/HIV prevention and care to more people at less cost. Recent innovations in STD/HIV prevention with information and communication technology-mediated behavioral supports include STD/HIV testing and partner interventions, behavioral interventions, self-management, and provider care. Computer-based and Internet-based behavioral STD/HIV interventions have demonstrated efficacy comparable to face-to-face interventions. Mobile phone STD/HIV interventions using text-messaging are being broadly utilized but more work is needed to demonstrate efficacy. Electronic health records and care management systems can improve care, but interventions are needed to support adoption. Information and communication technology is rapidly diffusing globally. Over the next 5-10 years smart-phones will be broadly disseminated, connecting billions of people to the Internet and enabling lower cost, highly engaging, and ubiquitous STD/HIV prevention and treatment support interventions.

The Investigation of Pre-Service Teachers' Concerns about Integrating Web 2.0 Technologies into Instruction

ERIC Educational Resources Information Center

Hao, Yungwei; Wang, Shiou-ling; Chang, Su-jen; Hsu, Yin-hung; Tang, Ren-yen

2013-01-01

Studies indicated Web 2.0 technologies can support learning. Then, integration of innovation may create concerns among teachers because of the innovative features. In this study, the innovation refers to Web 2.0 technology integration into instruction. To help pre-service teachers make the best use of the innovation in their future instruction, it…

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM ANNUAL REPORT TO CONGRESS FY 2002

EPA Science Inventory

This report details the Fiscal Year 2002 activities of the Superfund Innovative Technology Evaluation (SITE) Program. The Program focused on the remediation needs of the hazardous waste remediation community through demonstration and evaluation of innovative technologies for reme...

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM ANNUAL REPORT TO CONGRESS FY 2001

EPA Science Inventory

This report details the fiscal year 2001 activities of the Superfund Innovative Technology Evaluation (SITE) Program. The Program focuses on the remediation needs of the hazardous waste remediation community through demonstration and evaluation of innovative technologies for re...

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM ANNUAL REPORT TO CONGRESS FY 1995

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program was established more than nine years ago to encourage the development and implementation of innovative treatment technologies for hazardous waste site remediation. Development of this program was in direct response to ...

Shared learning in an interconnected world: innovations to advance global health equity

PubMed Central

2013-01-01

The notion of “reverse innovation”--that some insights from low-income countries might offer transferable lessons for wealthier contexts--is increasingly common in the global health and business strategy literature. Yet the perspectives of researchers and policymakers in settings where these innovations are developed have been largely absent from the discussion to date. In this Commentary, we present examples of programmatic, technological, and research-based innovations from Rwanda, and offer reflections on how the global health community might leverage innovative partnerships for shared learning and improved health outcomes in all countries. PMID:24119388

ICT and mobile health to improve clinical process delivery. a research project for therapy management process innovation.

PubMed

Locatelli, Paolo; Montefusco, Vittorio; Sini, Elena; Restifo, Nicola; Facchini, Roberta; Torresani, Michele

2013-01-01

The volume and the complexity of clinical and administrative information make Information and Communication Technologies (ICTs) essential for running and innovating healthcare. This paper tells about a project aimed to design, develop and implement a set of organizational models, acknowledged procedures and ICT tools (Mobile & Wireless solutions and Automatic Identification and Data Capture technologies) to improve actual support, safety, reliability and traceability of a specific therapy management (stem cells). The value of the project is to design a solution based on mobile and identification technology in tight collaboration with physicians and actors involved in the process to ensure usability and effectivenes in process management.

The snake geothermal drilling project. Innovative approaches to geothermal exploration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shervais, John W.; Evans, James P.; Liberty, Lee M.

2014-02-21

The goal of our project was to test innovative technologies using existing and new data, and to ground-truth these technologies using slim-hole core technology. The slim-hole core allowed us to understand subsurface stratigraphy and alteration in detail, and to correlate lithologies observed in core with surface based geophysical studies. Compiled data included geologic maps, volcanic vent distribution, structural maps, existing well logs and temperature gradient logs, groundwater temperatures, and geophysical surveys (resistivity, magnetics, gravity). New data included high-resolution gravity and magnetic surveys, high-resolution seismic surveys, three slimhole test wells, borehole wireline logs, lithology logs, water chemistry, alteration mineralogy, fracture distribution,more » and new thermal gradient measurements.« less

The Wyss institute: A new model for medical technology innovation and translation across the academic-industrial interface.

PubMed

Tolikas, Mary; Antoniou, Ayis; Ingber, Donald E

2017-09-01

The Wyss Institute for Biologically Inspired Engineering at Harvard University was formed based on the recognition that breakthrough discoveries cannot change the world if they never leave the laboratory. The Institute's mission is to discover the biological principles that Nature uses to build living things, and to harness these insights to create biologically inspired engineering innovations to advance human health and create a more sustainable world. Since its launch in 2009, the Institute has developed a new model for innovation, collaboration, and technology translation within academia, breaking "silos" to enable collaborations that cross institutional and disciplinary barriers. Institute faculty and staff engage in high-risk research that leads to transformative breakthroughs. The biological principles uncovered are harnessed to develop new engineering solutions for medicine and healthcare, as well as nonmedical areas, such as energy, architecture, robotics, and manufacturing. These technologies are translated into commercial products and therapies through collaborations with clinical investigators, corporate alliances, and the formation of new start-ups that are driven by a unique internal business development team including entrepreneurs-in-residence with domain-specific expertise. Here, we describe this novel organizational model that the Institute has developed to change the paradigm of how fundamental discovery, medical technology innovation, and commercial translation are carried out at the academic-industrial interface.

Thermo-Mechanical Methodology for Stabilizing Shape Memory Alloy Response

NASA Technical Reports Server (NTRS)

Padula, Santo

2013-01-01

This innovation is capable of significantly reducing the amount of time required to stabilize the strain-temperature response of a shape memory alloy (SMA). Unlike traditional stabilization processes that take days to weeks to achieve stabilized response, this innovation accomplishes stabilization in a matter of minutes, thus making it highly useful for the successful and practical implementation of SMA-based technologies in real-world applications. The innovation can also be applied to complex geometry components, not just simple geometries like wires or rods.

Enabling the SMART Wind Power Plant of the Future Through Science-Based Innovation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dykes, Katherine L.; Hand, M. M.; Lantz, Eric J.

This report describes the scientific challenges facing wind energy today and the recent scientific advancements that position the research community to tackle those challenges, as well as the new U.S. Department of Energy applied research program Atmosphere to Electrons that takes an integrated approach to addressing those challenges. It also ties these resulting scientific accomplishments to future technological innovation and quantifies the impact of that collection of innovations on 2030 wind power cost of energy.

Evolving provider payment models and patient access to innovative medical technology.

PubMed

Long, Genia; Mortimer, Richard; Sanzenbacher, Geoffrey

2014-12-01

Abstract Objective: To investigate the evolving use and expected impact of pay-for-performance (P4P) and risk-based provider reimbursement on patient access to innovative medical technology. Structured interviews with leading private payers representing over 110 million commercially-insured lives exploring current and planned use of P4P provider payment models, evidence requirements for technology assessment and new technology coverage, and the evolving relationship between the two topics. Respondents reported rapid increases in the use of P4P and risk-sharing programs, with roughly half of commercial lives affected 3 years ago, just under two-thirds today, and an expected three-quarters in 3 years. All reported well-established systems for evaluating new technology coverage. Five of nine reported becoming more selective in the past 3 years in approving new technologies; four anticipated that in the next 3 years there will be a higher evidence requirement for new technology access. Similarly, four expected it will become more difficult for clinically appropriate but costly technologies to gain coverage. All reported planning to rely more on these types of provider payment incentives to control costs, but didn't see them as a substitute for payer technology reviews and coverage limitations; they each have a role to play. Interviews limited to nine leading payers with models in place; self-reported data. Likely implications include a more uncertain payment environment for providers, and indirectly for innovative medical technology and future investment, greater reliance on quality and financial metrics, and increased evidence requirements for favorable coverage and utilization decisions. Increasing provider financial risk may challenge the traditional technology adoption paradigm, where payers assumed a 'gatekeeping' role and providers a countervailing patient advocacy role with regard to access to new technology. Increased provider financial risk may result in an additional hurdle to the adoption of new technology, rather than substitution of provider- for payer-based gatekeeping.

Quantifying innovation in surgery.

PubMed

Hughes-Hallett, Archie; Mayer, Erik K; Marcus, Hani J; Cundy, Thomas P; Pratt, Philip J; Parston, Greg; Vale, Justin A; Darzi, Ara W

2014-08-01

The objectives of this study were to assess the applicability of patents and publications as metrics of surgical technology and innovation; evaluate the historical relationship between patents and publications; develop a methodology that can be used to determine the rate of innovation growth in any given health care technology. The study of health care innovation represents an emerging academic field, yet it is limited by a lack of valid scientific methods for quantitative analysis. This article explores and cross-validates 2 innovation metrics using surgical technology as an exemplar. Electronic patenting databases and the MEDLINE database were searched between 1980 and 2010 for "surgeon" OR "surgical" OR "surgery." Resulting patent codes were grouped into technology clusters. Growth curves were plotted for these technology clusters to establish the rate and characteristics of growth. The initial search retrieved 52,046 patents and 1,801,075 publications. The top performing technology cluster of the last 30 years was minimally invasive surgery. Robotic surgery, surgical staplers, and image guidance were the most emergent technology clusters. When examining the growth curves for these clusters they were found to follow an S-shaped pattern of growth, with the emergent technologies lying on the exponential phases of their respective growth curves. In addition, publication and patent counts were closely correlated in areas of technology expansion. This article demonstrates the utility of publically available patent and publication data to quantify innovations within surgical technology and proposes a novel methodology for assessing and forecasting areas of technological innovation.

NASA Composite Cryotank Technology Project Game Changing Program

NASA Technical Reports Server (NTRS)

Fikes, John

2015-01-01

The fundamental goal of this project was to provide new and innovative cryotank technologies that enable human space exploration to destinations beyond low earth orbit such as the moon, near-earth asteroids, and Mars. The goal ... to mature technologies in preparation for potential system level flight demonstrations through significant ground-based testing and/or laboratory experimentation

Inside the Gap: Innovative Uses of Technology and Student Teachers

ERIC Educational Resources Information Center

Mahoney-O'Neil, Maryellen

2010-01-01

The technological generation gap is a societal phenomenon that also reaches into school classrooms. Typically when the generation gap in technology is discussed it puts students on one side of the gap and teachers on the other, with a clear demarcation implied based on age and assumed experience. This assumption does not account for the emergence…

ICT and Web Technology Based Innovations in Education Sector

ERIC Educational Resources Information Center

Sangeeta Namdev, Dhamdhere

2012-01-01

ICT made real magic and drastic changes in all service sectors along with higher education and library practices and services. The academic environment is changing from formal education to distance and online learning mode because of ICT. Web technology and mobile technology has made great impact on education sector. The role of Open Access,…

The Innovative Immersion of Mobile Learning into a Science Curriculum in Singapore: An Exploratory Study

ERIC Educational Resources Information Center

Sun, Daner; Looi, Chee-Kit; Wu, Longkai; Xie, Wenting

2016-01-01

With advancements made in mobile technology, increasing emphasis has been paid to how to leverage the affordances of mobile technology to improve science learning and instruction. This paper reports on a science curriculum supported by an inquiry-based framework and mobile technologies. It was developed by teachers and researchers in a multiyear…

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM Evaluation of Soil Amendment Technologies at the Crooksville/RosevillePottery Area of Concern Rocky Mountain Remediation ServicesEnvirobond™ Process

EPA Science Inventory

RMRS developed the Envirobond™ process to treat heavy metals in soil.This phosphate-based technology consists of a proprietary powder and solution that binds with metals in contaminated waste. RMRS claims that the Envirobond™ process converts metal contaminants from their leach...

Organizational Influences in Technology Adoption Decisions: A Case Study of Digital Libraries

ERIC Educational Resources Information Center

Oguz, Fatih

2016-01-01

The purpose of this study was to understand the organizational level decision factors in technology adoption in the context of digital libraries. A qualitative case study approach was used to investigate the adoption of a specific technology, XML-based Web services, in digital libraries. Rogers' diffusion of innovations and Wenger's communities of…

Examining Transformative Faculty Development Factors to Advance Technology Adoption and Diffusion at a Campus-Based Institution

ERIC Educational Resources Information Center

McKissic, Stephanie Camille

2012-01-01

The purpose of this mixed-method research, in the context of a case study was to examine faculty concerns with integrating technologies and the influences and motivations that lead to technology adoption and diffusion in the classroom. Specifically, the study examined the conceptual frameworks of Rogers' Innovation Diffusion Theory (IDT) and…

Aiming at Sustainable Innovation in Teacher Education--From Theory to Practice

ERIC Educational Resources Information Center

Turcsányi-Szabó, Márta

2012-01-01

The paper composes a framework for learning design, using Web 2.0 technologies in teacher training, transferring the advancement in technology to become an affordance in the teaching/learning process, based on Bloom's Extended Digital Taxonomy in order to enhance the Technological Pedagogical and Content Knowledge of teachers. As a case study, it…

Formative Assessment in Complex Problem-Solving Domains: The Emerging Role of Assessment Technologies

ERIC Educational Resources Information Center

Bhagat, Kaushal Kumar; Spector, J. Michael

2017-01-01

Much of the focus on learning technologies has been on structuring innovative learning experiences and on managing distance and hybrid learning environments. This article focuses on the use of technology as an important formative assessment and feedback tool. The rationale for this focus is based on prior research findings that suggest that timely…

CAV-OX CAVITATION OXIDIATION PROCESS - MAGNUM WATER TECHNOLOGY, INC. - APPLICATIONS ANALYSIS REPORT

EPA Science Inventory

This report evaluates the ability of the CAV-OX cavitation oxidation process to remove volatile organic compounds (VOC) present in aqueous wastes. This report also presents economic data based on the Superfund Innovative Technology Evaluation (SITE) Program demonstration and nine...

Redesigning Technology Integration into World Language Education

ERIC Educational Resources Information Center

Rodríguez, Julio C.

2018-01-01

This article describes how a multi-institutional, proficiency-based program engages stakeholders in design thinking to discover and explore solutions to perennial problems in technology integration into world language education (WLE). Examples of replicable activities illustrate the strategies used to fuel innovation efforts, including fostering…

Communication Technologies Promoting Educational Communities with Scholarship of Engagement

ERIC Educational Resources Information Center

Georgakopoulos, Alexia; Hawkins, Steven T.

2013-01-01

Purpose: This study aims to present Dramatic Problem Solving Facilitation Model (DPSFM) and Interactive Management (IM) as innovative alternative dispute resolution approaches that incorporate communication technologies in recording and analyzing data. DPSFM utilizes performance-based actions with facilitation methods to help participants design…

48 CFR 215.404-71-2 - Performance risk.

Code of Federal Regulations, 2011 CFR

2011-10-01

... incentive range when contract performance includes the introduction of new, significant technological innovation. Use the technology incentive range only for the most innovative contract efforts. Innovation may... reliability, or reduced costs; or (B) New products or systems that contain significant technological advances...

75 FR 16515 - NASA Advisory Council; Technology and Innovation Committee; Meeting.

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-01

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (10-037)] NASA Advisory Council; Technology and Innovation Committee; Meeting. AGENCY: National Aeronautics and Space Administration. ACTION... of the Technology and Innovation Committee of the NASA Advisory Council (NAC). The Meeting will be...

78 FR 41115 - NASA Advisory Council; Technology and Innovation Committee; Meeting.

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-09

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 13-073] NASA Advisory Council; Technology and Innovation Committee; Meeting. AGENCY: National Aeronautics and Space Administration. ACTION... of the Technology and Innovation Committee of the NASA Advisory Council (NAC). The meeting will be...

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM: PROGRESS AND ACCOMPLISHMENTS - FISCAL YEAR 1991

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) program was the first major program for demonstrating and evaluating full-scale innovative treatment technologies at hazardous waste sites. Having concluded its fifth year, the SITE program is recognized as a leading advocate ...

76 FR 4137 - Comment Request: Innovative Technology Experiences for Students and Teachers (ITEST) Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-24

... visits, and a student-survey instrument to measure project outcomes. Estimate of Burden Respondents... NATIONAL SCIENCE FOUNDATION Comment Request: Innovative Technology Experiences for Students and... Friday. SUPPLEMENTARY INFORMATION: Title of Collection: Innovative Technology Experiences for Students...

Studying Innovation Technologies in Modern Education

ERIC Educational Resources Information Center

Stukalenko, Nina M.; Zhakhina, Bariya B.; Kukubaeva, Asiya K.; Smagulova, Nurgul K.; Kazhibaeva, Gulden K.

2016-01-01

In modern society, innovation technologies expand to almost every field of human activity, including such wide field as education. Due to integrating innovation technologies into the educational process practice, this phenomenon gained special significance within improvement and modernization of the established educational system. Currently, the…

Space information technologies: future agenda

NASA Astrophysics Data System (ADS)

Flournoy, Don M.

2005-11-01

Satellites will operate more like wide area broadband computer networks in the 21st Century. Space-based information and communication technologies will therefore be a lot more accessible and functional for the individual user. These developments are the result of earth-based telecommunication and computing innovations being extended to space. The author predicts that the broadband Internet will eventually be available on demand to users of terrestrial networks wherever they are. Earth and space communication assets will be managed as a single network. Space networks will assure that online access is ubiquitous. No matter whether users are located in cities or in remote locations, they will always be within reach of a node on the Internet. Even today, scalable bandwidth can be delivered to active users when moving around in vehicles on the ground, or aboard ships at sea or in the air. Discussion of the innovative technologies produced by NASA's Advanced Communications Technology Satellite (1993-2004) demonstrates future capabilities of satellites that make them uniquely suited to serve as nodes on the broadband Internet.

[Urotechnology: a new interdisciplinary platform for promoting and managing of technical innovations in urology].

PubMed

Miernik, A; Becker, C; Wullich, B; Schoenthaler, M; Arnolds, B J; Wetterauer, U

2015-01-01

The innovative power in medical engineering and technology development requires a close cooperation between universities and non-university research institutions and a collaboration with industrial partners. German knowledge in the fields of video and micro-optics, microsystem technology and of informational technology and software applications seem to be highly competitive at international level. Germany's previous leadership in the development of technical equipment will be challenged by today's requirements and difficulties in medical engineering. Research and expenses demands for the development of novel medical instruments, products and applications will increase continuously. Transparency and coordinated collaboration between universities and industrial partners will contribute to a substantial improvement in surgical therapy. Medical technology of the future, including urotechnology, requires professional structures and coordination and will have to be based on evidence.

Technology-based Interventions in Social Work Practice: A Systematic Review of Mental Health Interventions

PubMed Central

Montgomery, Katherine

2014-01-01

Despite concerns around the use of technology-based interventions, they are increasingly being employed by social workers as a direct practice methodology to address the mental health needs of vulnerable clients. Researchers have highlighted the importance of using innovative technologies within social work practice, yet little has been done to summarize the evidence and collectively assess findings. In this systematic review, we describe accounts of technology-based mental health interventions delivered by social workers over the past 10 years. Results highlight the impacts of these tools and summarize advantages and disadvantages to utilizing technologies as a method for delivering or facilitating interventions. PMID:25321935

Technology-based interventions in social work practice: a systematic review of mental health interventions.

PubMed

Ramsey, Alex T; Montgomery, Katherine

2014-10-01

Despite concerns around the use of technology-based interventions, they are increasingly being employed by social workers as a direct practice methodology to address the mental health needs of vulnerable clients. Researchers have highlighted the importance of using innovative technologies within social work practice, yet little has been done to summarize the evidence and collectively assess findings. In this systematic review, we describe accounts of technology-based mental health interventions delivered by social workers over the past 10 years. Results highlight the impacts of these tools and summarize advantages and disadvantages to utilizing technologies as a method for delivering or facilitating interventions.

How Should Organizations Promote Equitable Distribution of Benefits from Technological Innovation in Health Care?

PubMed

Nambisan, Satish; Nambisan, Priya

2017-11-01

Technological innovations typically benefit those who have good access to and an understanding of the underlying technologies. As such, technology-centered health care innovations are likely to preferentially benefit users of privileged socioeconomic backgrounds. Which policies and strategies should health care organizations adopt to promote equitable distribution of the benefits from technological innovations? In this essay, we draw on two important concepts-co-creation (the joint creation of value by multiple parties such as a company and its customers) and digitalization (the application of new digital technologies and the ensuing changes in sociotechnical structures and relationships)-and propose a set of policies and strategies that health care organizations could adopt to ensure that benefits from technological innovations are more equitably distributed among all target populations, including resource-poor communities and individuals. © 2017 American Medical Association. All Rights Reserved.

TH-A-17A-01: Innovation in PET Instrumentation and Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Casey, M; Miyaoka, R; Shao, Y

Innovation in PET instrumentation has led to the new millennium revolutionary imaging applications for diagnosis, therapeutic guidance, and development of new molecular imaging probes, etc. However, after several decades innovations, will the advances of PET technology and applications continue with the same trend and pace? What will be the next big thing beyond the PET/CT, PET/MRI, and Time-of-flight PET? How will the PET instrumentation and imaging performance be further improved by novel detector research and advanced imaging system development? Or will the development of new algorithms and methodologies extend the limit of current instrumentation and leapfrog the imaging quality andmore » quantification for practical applications? The objective of this session is to present an overview of current status and advances in the PET instrumentation and applications with speakers from leading academic institutes and a major medical imaging company. Presenting with both academic research projects and commercial technology developments, this session will provide a glimpse of some latest advances and challenges in the field, such as using semiconductor photon-sensor based PET detectors to improve performance and enable new applications, as well as the technology trend that may lead to the next breakthrough in PET imaging for clinical and preclinical applications. Both imaging and image-guided therapy subjects will be discussed. Learning Objectives: Describe the latest innovations in PET instrumentation and applications Understand the driven force behind the PET instrumentation innovation and development Learn the trend of PET technology development for applications.« less

Innovations in connected health.

PubMed

Singh, Kanwaljit; Kvedar, Joseph C

2009-01-01

Technological advancements in recent decades have made the concept of Connected Health feasible. These innovations include hardware innovations (such as wearable medical technology), and software (such as electronic personal health record systems e.g., Google Health and Microsoft HealthVault). Technology innovations must be accompanied by process innovations to truly add value. In health care that includes clinical process innovations and business process innovations. This chapter outlines how the healthcare system is being affected by innovations in connected health. It provides examples that illustrate the various categories of innovation and their impact. Now more than ever, health care reform is required in the U.S. The systems outlined in this chapter will allow care that is of high quality, while extending providers across more patients (i.e. increasing access) at a lower overall cost (improved efficiency).

Media Culture 2020: Collaborative Teaching and Blended Learning Using Social Media and Cloud-Based Technologies

ERIC Educational Resources Information Center

Vickers, Richard; Field, James; Melakoski, Cai

2015-01-01

In 2013 five universities from across Europe undertook an innovative project "Media Culture 2020", combining skills and forces to develop new practices that would face the challenge of the convergence of digital media, taking full advantage of social media and cloud-based technologies. The aim of the Media Culture 2020 project was to…

The Inquiry Based Science and Technology Education Program (IN-STEP): The Evaluation of the First Year

ERIC Educational Resources Information Center

Corcoran, Thomas B.

2008-01-01

This is the first report on the evaluation of the Inquiry Based Science and Technology Education Program (IN-STEP), an innovative and ambitious science education initiative for lower secondary schools being undertaken by a public-private partnership in Thailand funded by MSD-Thailand, an affiliate of Merck & Co. IN-STEP is a public-private…

Using information communication technology in models of integrated community-based primary health care: learning from the iCOACH case studies.

PubMed

Steele Gray, Carolyn; Barnsley, Jan; Gagnon, Dominique; Belzile, Louise; Kenealy, Tim; Shaw, James; Sheridan, Nicolette; Wankah Nji, Paul; Wodchis, Walter P

2018-06-26

Information communication technology (ICT) is a critical enabler of integrated models of community-based primary health care; however, little is known about how existing technologies have been used to support new models of integrated care. To address this gap, we draw on data from an international study of integrated models, exploring how ICT is used to support activities of integrated care and the organizational and environmental barriers and enablers to its adoption. We take an embedded comparative multiple-case study approach using data from a study of implementation of nine models of integrated community-based primary health care, the Implementing Integrated Care for Older Adults with Complex Health Needs (iCOACH) study. Six cases from Canada, three each in Ontario and Quebec, and three in New Zealand, were studied. As part of the case studies, interviews were conducted with managers and front-line health care providers from February 2015 to March 2017. A qualitative descriptive approach was used to code data from 137 interviews and generate word tables to guide analysis. Despite different models and contexts, we found strikingly similar accounts of the types of activities supported through ICT systems in each of the cases. ICT systems were used most frequently to support activities like care coordination by inter-professional teams through information sharing. However, providers were limited in their ability to efficiently share patient data due to data access issues across organizational and professional boundaries and due to system functionality limitations, such as a lack of interoperability. Even in innovative models of care, managers and providers in our cases mainly use technology to enable traditional ways of working. Technology limitations prevent more innovative uses of technology that could support disruption necessary to improve care delivery. We argue the barriers to more innovative use of technology are linked to three factors: (1) information access barriers, (2) limited functionality of available technology, and (3) organizational and provider inertia.

48 CFR 1819.7301 - Scope of subpart.

Code of Federal Regulations, 2010 CFR

2010-10-01

... technological innovation; and increase private sector commercialization of innovations derived from Federal R/R... SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Small Business Innovation Research (SBIR) and Small Business Technology Transfer (STTR) Programs 1819.7301 Scope of subpart. The Small Business Innovation Research (SBIR...

48 CFR 1819.7301 - Scope of subpart.

Code of Federal Regulations, 2011 CFR

2011-10-01

... technological innovation; use small business to meet Federal R/R&D needs; foster and encourage participation by..., in technological innovation; and increase private sector commercialization of innovations derived... ADMINISTRATION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Small Business Innovation Research (SBIR) and Small...

Intent to sustain use of a mental health innovation by school providers: What matters most?

PubMed Central

Livet, Melanie; Yannayon, Mary; Kocher, Kelly; McMillen, Janey

2017-01-01

Despite innovations being routinely introduced in schools to support the mental health of students, few are successfully maintained over time. This study explores the role of innovation characteristics, individual attitudes and skills, and organizational factors in school providers’ decisions to continue use of Centervention, a technology-based tool that supports implementation of evidence-based mental health interventions (EBIs). Data were collected from 44 providers through online surveys following use of Centervention over a one-year period. When considered with individual and organizational factors, experience with Centervention (usability, usefulness, and satisfaction) was found to be the most influential predictor of intent to sustain use. Results reinforce the importance of (1) differentiating between factors that predict initial adoption vs. those that enable sustainability and (2) tailoring sustainability decision models to the nature of the innovation. They also support the need to incorporate strategies to enhance provider experience during implementation of an innovation. PMID:29403540

Technology Innovation

EPA Pesticide Factsheets

EPA produces innovative technologies and facilitates their creation in line with the Agency mission to create products such as the stormwater calculator, remote sensing, innovation clusters, and low-cost air sensors.

Innovative manufacturing technologies for low-cost, high efficiency PERC-based PV modules

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yelundur, Vijay

2017-04-19

The goal this project was to accelerate the deployment of innovative solar cell and module technologies that reduce the cost of PERC-based modules to best-in-class. New module integration technology was to be used to reduce the cost and reliance on conventional silver bus bar pastes and enhance cell efficiency. On the cell manufacturing front, the cost of PERC solar cells was to be reduced by introducing advanced metallization approaches to increase cell efficiency. These advancements will be combined with process optimization to target cell efficiencies in the range of 21 to 21.5%. This project will also explore the viability ofmore » a bifacial PERC solar cell design to enable cost savings through the use of thin silicon wafers. This project was terminated on 4/30/17 after four months of activity due financial challenges facing the recipient.« less

76 FR 19793 - NASA Advisory Council; Technology and Innovation Committee; Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-08

... and Innovation Committee; Meeting AGENCY: National Aeronautics and Space Administration. ACTION... Innovation Committee of the NASA Advisory Council. The meeting will be held for the purpose of reviewing the Space Technology programs and review knowledge management and technology transfer activities within the...

Technological Innovation and Cooperation for Foreign Information Access Program

ERIC Educational Resources Information Center

Office of Postsecondary Education, US Department of Education, 2012

2012-01-01

The Technological Innovation and Cooperation for Foreign Information Access (TICFIA) Program supports projects focused on developing innovative technologies for accessing, collecting, organizing, preserving, and disseminating information from foreign sources to address the U.S.' teaching and research needs in international education and foreign…

Technology and Innovation in Adult Learning

ERIC Educational Resources Information Center

King, Kathy P.

2017-01-01

"Technology and Innovation in Adult Learning" introduces educators and students to the intersection of adult learning and the growing technological revolution. Written by an internationally recognized expert in the field, this book explores the theory, research, and practice driving innovation in both adult learning and learning…

77 FR 22359 - Innovative Technology Experiences for Students and Teachers (ITEST) Program; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-13

... NATIONAL SCIENCE FOUNDATION Innovative Technology Experiences for Students and Teachers (ITEST.... SUPPLEMENTARY INFORMATION: Title of Collection: Innovative Technology Experiences for Students and Teachers... for Students and Teachers (ITEST) is a National Science Foundation program that responds to current...

Defect-free fabrication of nano-disk and nano-wire by fusion of bio-template and neutral beam etching

NASA Astrophysics Data System (ADS)

Samukawa, S.; Noda, Shuichi; Higo, Akio; Yasuda, Manabu; Wada, Kazumi

2016-11-01

We have developed an innovated fabrication technology of Si, GaAs, and Ge nano-structures, i.e., we called defect-free neutral beam etching. The technology has been successfully applied to prototype the quantum nano-disks and nano-wires with ferritin based bio-templates. SEM observation verifies that the designed structures are prototyped. Photoluminescence measurements demonstrates high optical quality of nano-structures based on the technology.

The Innovation Deficit in Urban Water: The Need for an Integrated Perspective on Institutions, Organizations, and Technology

PubMed Central

Kiparsky, Michael; Sedlak, David L.; Thompson, Barton H.; Truffer, Bernhard

2013-01-01

Abstract Interaction between institutional change and technological change poses important constraints on transitions of urban water systems to a state that can meet future needs. Research on urban water and other technology-dependent systems provides insights that are valuable to technology researchers interested in assuring that their efforts will have an impact. In the context of research on institutional change, innovation is the development, application, diffusion, and utilization of new knowledge and technology. This definition is intentionally inclusive: technological innovation will play a key role in reinvention of urban water systems, but is only part of what is necessary. Innovation usually depends on context, such that major changes to infrastructure include not only the technological inventions that drive greater efficiencies and physical transformations of water treatment and delivery systems, but also the political, cultural, social, and economic factors that hinder and enable such changes. On the basis of past and present changes in urban water systems, institutional innovation will be of similar importance to technological innovation in urban water reinvention. To solve current urban water infrastructure challenges, technology-focused researchers need to recognize the intertwined nature of technologies and institutions and the social systems that control change. PMID:23983450

Initial Usability and Feasibility Evaluation of a Personal Health Record-Based Self-Management System for Older Adults.

PubMed

Sheehan, Barbara; Lucero, Robert J

2015-01-01

Electronic personal health record-based (ePHR-based) self-management systems can improve patient engagement and have an impact on health outcomes. In order to realize the benefits of these systems, there is a need to develop and evaluate heath information technology from the same theoretical underpinnings. Using an innovative usability approach based in human-centered distributed information design (HCDID), we tested an ePHR-based falls-prevention self-management system-Self-Assessment via a Personal Health Record (i.e., SAPHeR)-designed using HCDID principles in a laboratory. And we later evaluated SAPHeR's use by community-dwelling older adults at home. The innovative approach used in this study supported the analysis of four components: tasks, users, representations, and functions. Tasks were easily learned and features such as text-associated images facilitated task completion. Task performance times were slow, however user satisfaction was high. Nearly seven out of every ten features desired by design participants were evaluated in our usability testing of the SAPHeR system. The in vivo evaluation suggests that older adults could improve their confidence in performing indoor and outdoor activities after using the SAPHeR system. We have applied an innovative consumer-usability evaluation. Our approach addresses the limitations of other usability testing methods that do not utilize consistent theoretically based methods for designing and testing technology. We have successfully demonstrated the utility of testing consumer technology use across multiple components (i.e., task, user, representational, functional) to evaluate the usefulness, usability, and satisfaction of an ePHR-based self-management system.

The importance of basic factors in innovation processes and their effects on innovation capability of Malaysian-owned manufacturing companies

NASA Astrophysics Data System (ADS)

Suradi, Nur Riza Mohd; Omar, Aminuddin; Shahabuddin, Faridatulazna Ahmad

2015-02-01

Innovation is the core ingredient in the competitiveness of today's businesses. Any company that cannot innovate will be losing its competitiveness. While the study on innovation at conceptual level is widely available, there is still lack of deep understanding of how innovation factors impact each stage of the processes of innovation that happen in Malaysian companies. This process-factor approach and understanding may help the government focuses its assistance on relevant factors at relevant process according to the size of the company. This study examines how companies are affected by fundamental factors needed in innovation. Based on results of MYTIC Study 2012 on the level of Technological Innovation Capability (TIC) of Malaysian companies using the RDCB framework, the significance of each innovation factor in each innovation process is determined. This study shows that human resource factor gives more impact than other factors in most processes. Also, financial and human resource factors are likely dictated by the size of the company.

Hybrid Electrostatic/Flextensional Mirror for Lightweight, Large-Aperture, and Cryogenic Space Telescopes

NASA Technical Reports Server (NTRS)

Patrick, Brian; Moore, James; Hackenberger, Wesley; Jiang, Xiaoning

2013-01-01

A lightweight, cryogenically capable, scalable, deformable mirror has been developed for space telescopes. This innovation makes use of polymer-based membrane mirror technology to enable large-aperture mirrors that can be easily launched and deployed. The key component of this innovation is a lightweight, large-stroke, cryogenic actuator array that combines the high degree of mirror figure control needed with a large actuator influence function. The latter aspect of the innovation allows membrane mirror figure correction with a relatively low actuator density, preserving the lightweight attributes of the system. The principal components of this technology are lightweight, low-profile, high-stroke, cryogenic-capable piezoelectric actuators based on PMN-PT (piezoelectric lead magnesium niobate-lead titanate) single-crystal configured in a flextensional actuator format; high-quality, low-thermal-expansion polymer membrane mirror materials developed by NeXolve; and electrostatic coupling between the membrane mirror and the piezoelectric actuator assembly to minimize problems such as actuator print-through.

An Overview of Power, Energy Storage, and Conversion Efforts for 2014 SBIR Phases I and II

NASA Technical Reports Server (NTRS)

Nguyen, Hung D.; Steele, Gynelle C.

2016-01-01

Technological innovation is the overall focus of NASA's Small Business Innovation Research (SBIR) program. The program invests in the development of innovative concepts and technologies to help NASA's mission directorates address critical research and development needs for agency projects. NASA's Small Business Innovation Research (SBIR) program focuses on technological innovation by investing in development of innovative concepts and technologies to help NASA mission directorates address critical research needs for Agency programs. This report highlights 15 of the innovative SBIR 2014 Phase I and II projects that focus on one of NASA Glenn Research Center's six core competencies-Power, Energy Storage and Conversion. The technologies cover a wide spectrum of applications such as high-radiation-tolerant ceramic voltage isolators, development of hermetic sealing glasses for solid oxide fuel cells, rechargeable lithium metal cells, high-efficiency direct methane solid oxide fuel cell systems, Li metal protection for high-energy space batteries, isolated bidirectional direct current converters for distributed battery energy applications, and high-efficiency rad-hard ultrathin Si photovoltaic cell technology for space. Each article describes an innovation and technical objective and highlights NASA commercial and industrial applications. This report provides an opportunity for NASA engineers, researchers, and program managers to learn how NASA SBIR technologies could help their programs and projects, and lead to collaborations and partnerships between the small SBIR companies and NASA that would benefit both.

77 FR 46805 - Small Business Innovation Research Program Policy Directive

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-06

... Small Business Innovation Research Program Policy Directive; Small Business Technology Transfer Program Policy Directive; Small Business Innovation Research (SBIR) Program and Small Business Technology... ADMINISTRATION 13 CFR Chapter I RIN 3245-AF84 Small Business Innovation Research Program Policy Directive AGENCY...

NASA's Public Participation Universe: Why and How the U.S. Space Agency Is Democratizing Its Approaches to Innovation

NASA Technical Reports Server (NTRS)

Kaminski, Amy; Buquo, Lynn; Roman, Monsi; Beck, Beth; Thaller, Michelle

2016-01-01

This paper analyzes NASA's increasing effort to invite greater public participation in its techno scientific work through open innovation methodologies. First we examine why NASA has expanded its use of these approaches, noting the roles of an intertwined set of forcing functions including budget constraints, the availability of technological resources, and committed individuals. Next we outline the strategies the agency has invoked to engage the public in research, technology development, and other activities to advance and shape NASA's mission. As we show, promoting greater public involvement has entailed facilitating the NASA workforce's familiarity with open innovation approaches as well as developing projects and creating outreach strategies appropriate to the envisioned participant base. We then discuss the wide variety of outcomes NASA's open innovation initiatives have yielded in support of NASA research and development objectives as well as benefits to participants and others. We conclude with a discussion of the remaining barriers to the use of open innovation techniques as a standard practice and the strategies in work to overcome those barriers so the full potential of a democratized approach to innovation can be realized.

Linear feature extraction from radar imagery: SBIR (Small Business Innovative Research) phase 2, option 1

NASA Astrophysics Data System (ADS)

Conner, Gary D.; Milgram, David L.; Lawton, Daryl T.; McConnell, Christopher C.

1988-04-01

The goal of this effort is to develop and demonstrate prototype processing capabilities for a knowledge-based system to automatically extract and analyze linear features from synthetic aperture radar (SAR) imagery. This effort constitutes Phase 2 funding through the Defense Small Business Innovative Research (SBIR) Program. Previous work examined the feasibility of the technology issues involved in the development of an automatedlinear feature extraction system. This Option 1 Final Report documents this examination and the technologies involved in automating this image understanding task. In particular, it reports on a major software delivery containing an image processing algorithmic base, a perceptual structures manipulation package, a preliminary hypothesis management framework and an enhanced user interface.

Entrepreneurial University: India's Response. Research & Occasional Paper Series: CSHE.2.08

ERIC Educational Resources Information Center

Gupta, Asha

2008-01-01

The object of this paper is to analyze the concepts of "entrepreneurship" and "entrepreneurial university" in the broader context of globalization, technological innovations and the emergence of knowledge-based and technology-driven economies. Instead of epistemological and organizational forms of knowledge production and…

Online People Tagging: Social (Mobile) Network(ing) Services and Work-Based Learning

ERIC Educational Resources Information Center

Cook, John; Pachler, Norbert

2012-01-01

Social and mobile technologies offer users unprecedented opportunities for communicating, interacting, sharing, meaning-making, content and context generation. And, these affordances are in constant flux driven by a powerful interplay between technological innovation and emerging cultural practices. Significantly, also, they are starting to…

Expanding the Role of an Earth Science Data System: The GHRC Innovations Lab

NASA Astrophysics Data System (ADS)

Conover, H.; Ramachandran, R.; Smith, T.; Kulkarni, A.; Maskey, M.; He, M.; Keiser, K.; Graves, S. J.

2013-12-01

The Global Hydrology Resource Center is a NASA Earth Science Distributed Active Archive Center (DAAC), managed in partnership by the Earth Science Department at NASA's Marshall Space Flight Center and the University of Alabama in Huntsville's Information Technology and Systems Center. Established in 1991, the GHRC processes, archives and distributes global lightning data from space, airborne and ground based observations from hurricane science field campaigns and Global Precipitation Mission (GPM) ground validation experiments, and satellite passive microwave products. GHRC's close association with the University provides a path for technology infusion from the research center into the data center. The ITSC has a long history of designing and operating science data and information systems. In addition to the GHRC and related data management projects, the ITSC also conducts multidisciplinary research in many facets of information technology. The coupling of ITSC research with the operational GHRC Data Center has enabled the development of new technologies that directly impact the ability of researchers worldwide to apply Earth science data to their specific domains of interest. The GHRC Innovations Lab will provide a showcase for emerging geoinformatics technologies resulting from NASA-sponsored research at the ITSC. Research products to be deployed in the Innovations Lab include: * Data Albums - curated collections of information related to a specific science topic or event with links to relevant data files from different sources. * Data Prospecting - combines automated data mining techniques with user interaction to provide for quick exploration of large volumes of data. * Provenance Browser - provides for graphical exploration of data lineage and related contextual information. In the Innovations Lab, these technologies can be targeted to GHRC data sets, and tuned to address GHRC user interests. As technologies are tested and matured in the Innovations Lab, the most promising will be selected for incorporation into the GHRC's online tool suite.

The new world of discovery, invention, and innovation: convergence of knowledge, technology, and society

NASA Astrophysics Data System (ADS)

Roco, Mihail C.; Bainbridge, William S.

2013-09-01

Convergence of knowledge and technology for the benefit of society (CKTS) is the core opportunity for progress in the twenty-first century. CKTS is defined as the escalating and transformative interactions among seemingly different disciplines, technologies, communities, and domains of human activity to achieve mutual compatibility, synergism, and integration, and through this process to create added value and branch out to meet shared goals. Convergence has been progressing by stages over the past several decades, beginning with nanotechnology for the material world, followed by convergence of nanotechnology, biotechnology, information, and cognitive science (NBIC) for emerging technologies. CKTS is the third level of convergence. It suggests a general process to advance creativity, innovation, and societal progress based on five general purpose principles: (1) the interdependence of all components of nature and society, (2) decision analysis for research, development, and applications based on dynamic system-logic deduction, (3) enhancement of creativity and innovation through evolutionary processes of convergence that combines existing principles and divergence that generates new ones, (4) the utility of higher-level cross-domain languages to generate new solutions and support transfer of new knowledge, and (5) the value of vision-inspired basic research embodied in grand challenges. CKTS is a general purpose approach in knowledge society. It allows society to answer questions and resolve problems that isolated capabilities cannot, as well as to create new competencies, knowledge, and technologies on this basis. Possible solutions are outlined for key societal challenges in the next decade, including support for foundational emerging technologies NBIC to penetrate essential platforms of human activity and create new industries and jobs, improve lifelong wellness and human potential, achieve personalized and integrated healthcare and education, and secure a sustainable quality of life for all. This paper provides a 10-year "NBIC2" vision within a longer-term framework for converging technology and human progress outlined in a previous study of unifying principles across "NBIC" fields that began with nanotechnology, biotechnology, information technology, and technologies based on and enabling cognitive science (Roco and Bainbridge, Converging technologies for improving human performance: nanotechnology, biotechnology, information technology and cognitive sciences, 2003).

Impact of the Knowledge and Beliefs of Egyptian Science Teachers in Integrating a STS Based Curriculum: A Sociocultural Perspective

ERIC Educational Resources Information Center

Mansour, Nasser

2010-01-01

The failure of much curriculum innovation has been attributed to the neglect by innovators of teachers' perceptions. The purpose of this study was to investigate inservice science teachers views of integrating Science, Technology and Society (STS) issues into the science curriculum and identify the factors that influence their decisions concerning…

49 CFR 1.98 - The Research and Innovative Technology Administration.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 1 2014-10-01 2014-10-01 false The Research and Innovative Technology Administration. 1.98 Section 1.98 Transportation Office of the Secretary of Transportation ORGANIZATION AND DELEGATION OF POWERS AND DUTIES Operating Administrations § 1.98 The Research and Innovative Technology...

49 CFR 1.98 - The Research and Innovative Technology Administration.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 1 2013-10-01 2013-10-01 false The Research and Innovative Technology Administration. 1.98 Section 1.98 Transportation Office of the Secretary of Transportation ORGANIZATION AND DELEGATION OF POWERS AND DUTIES Operating Administrations § 1.98 The Research and Innovative Technology...

49 CFR 1.98 - The Research and Innovative Technology Administration.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 1 2012-10-01 2012-10-01 false The Research and Innovative Technology Administration. 1.98 Section 1.98 Transportation Office of the Secretary of Transportation ORGANIZATION AND DELEGATION OF POWERS AND DUTIES Operating Administrations § 1.98 The Research and Innovative Technology...

Making technological innovation work for sustainable development.

PubMed

Anadon, Laura Diaz; Chan, Gabriel; Harley, Alicia G; Matus, Kira; Moon, Suerie; Murthy, Sharmila L; Clark, William C

2016-08-30

This paper presents insights and action proposals to better harness technological innovation for sustainable development. We begin with three key insights from scholarship and practice. First, technological innovation processes do not follow a set sequence but rather emerge from complex adaptive systems involving many actors and institutions operating simultaneously from local to global scales. Barriers arise at all stages of innovation, from the invention of a technology through its selection, production, adaptation, adoption, and retirement. Second, learning from past efforts to mobilize innovation for sustainable development can be greatly improved through structured cross-sectoral comparisons that recognize the socio-technical nature of innovation systems. Third, current institutions (rules, norms, and incentives) shaping technological innovation are often not aligned toward the goals of sustainable development because impoverished, marginalized, and unborn populations too often lack the economic and political power to shape innovation systems to meet their needs. However, these institutions can be reformed, and many actors have the power to do so through research, advocacy, training, convening, policymaking, and financing. We conclude with three practice-oriented recommendations to further realize the potential of innovation for sustainable development: (i) channels for regularized learning across domains of practice should be established; (ii) measures that systematically take into account the interests of underserved populations throughout the innovation process should be developed; and (iii) institutions should be reformed to reorient innovation systems toward sustainable development and ensure that all innovation stages and scales are considered at the outset.

Making technological innovation work for sustainable development

PubMed Central

Anadon, Laura Diaz; Harley, Alicia G.; Matus, Kira; Moon, Suerie; Murthy, Sharmila L.

2016-01-01

This paper presents insights and action proposals to better harness technological innovation for sustainable development. We begin with three key insights from scholarship and practice. First, technological innovation processes do not follow a set sequence but rather emerge from complex adaptive systems involving many actors and institutions operating simultaneously from local to global scales. Barriers arise at all stages of innovation, from the invention of a technology through its selection, production, adaptation, adoption, and retirement. Second, learning from past efforts to mobilize innovation for sustainable development can be greatly improved through structured cross-sectoral comparisons that recognize the socio-technical nature of innovation systems. Third, current institutions (rules, norms, and incentives) shaping technological innovation are often not aligned toward the goals of sustainable development because impoverished, marginalized, and unborn populations too often lack the economic and political power to shape innovation systems to meet their needs. However, these institutions can be reformed, and many actors have the power to do so through research, advocacy, training, convening, policymaking, and financing. We conclude with three practice-oriented recommendations to further realize the potential of innovation for sustainable development: (i) channels for regularized learning across domains of practice should be established; (ii) measures that systematically take into account the interests of underserved populations throughout the innovation process should be developed; and (iii) institutions should be reformed to reorient innovation systems toward sustainable development and ensure that all innovation stages and scales are considered at the outset. PMID:27519800

Technology-Based Innovations to Foster Personalized Healthy Lifestyles and Well-Being: A Targeted Review.

PubMed

Spanakis, Emmanouil G; Santana, Silvina; Tsiknakis, Manolis; Marias, Kostas; Sakkalis, Vangelis; Teixeira, António; Janssen, Joris H; de Jong, Henri; Tziraki, Chariklia

2016-06-24

New community-based arrangements and novel technologies can empower individuals to be active participants in their health maintenance, enabling people to control and self-regulate their health and wellness and make better health- and lifestyle-related decisions. Mobile sensing technology and health systems responsive to individual profiles combined with cloud computing can expand innovation for new types of interoperable services that are consumer-oriented and community-based. This could fuel a paradigm shift in the way health care can be, or should be, provided and received, while lessening the burden on exhausted health and social care systems. Our goal is to identify and discuss the main scientific and engineering challenges that need to be successfully addressed in delivering state-of-the-art, ubiquitous eHealth and mHealth services, including citizen-centered wellness management services, and reposition their role and potential within a broader context of diverse sociotechnical drivers, agents, and stakeholders. We review the state-of-the-art relevant to the development and implementation of eHealth and mHealth services in critical domains. We identify and discuss scientific, engineering, and implementation-related challenges that need to be overcome to move research, development, and the market forward. Several important advances have been identified in the fields of systems for personalized health monitoring, such as smartphone platforms and intelligent ubiquitous services. Sensors embedded in smartphones and clothes are making the unobtrusive recognition of physical activity, behavior, and lifestyle possible, and thus the deployment of platforms for health assistance and citizen empowerment. Similarly, significant advances are observed in the domain of infrastructure supporting services. Still, many technical problems remain to be solved, combined with no less challenging issues related to security, privacy, trust, and organizational dynamics. Delivering innovative ubiquitous eHealth and mHealth services, including citizen-centered wellness and lifestyle management services, goes well beyond the development of technical solutions. For the large-scale information and communication technology-supported adoption of healthier lifestyles to take place, crucial innovations are needed in the process of making and deploying usable empowering end-user services that are trusted and user-acceptable. Such innovations require multidomain, multilevel, transdisciplinary work, grounded in theory but driven by citizens' and health care professionals' needs, expectations, and capabilities and matched by business ability to bring innovation to the market.

Technology-Based Innovations to Foster Personalized Healthy Lifestyles and Well-Being: A Targeted Review

PubMed Central

Santana, Silvina; Tsiknakis, Manolis; Marias, Kostas; Sakkalis, Vangelis; Teixeira, António; Janssen, Joris H; de Jong, Henri; Tziraki, Chariklia

2016-01-01

Background New community-based arrangements and novel technologies can empower individuals to be active participants in their health maintenance, enabling people to control and self-regulate their health and wellness and make better health- and lifestyle-related decisions. Mobile sensing technology and health systems responsive to individual profiles combined with cloud computing can expand innovation for new types of interoperable services that are consumer-oriented and community-based. This could fuel a paradigm shift in the way health care can be, or should be, provided and received, while lessening the burden on exhausted health and social care systems. Objective Our goal is to identify and discuss the main scientific and engineering challenges that need to be successfully addressed in delivering state-of-the-art, ubiquitous eHealth and mHealth services, including citizen-centered wellness management services, and reposition their role and potential within a broader context of diverse sociotechnical drivers, agents, and stakeholders. Methods We review the state-of-the-art relevant to the development and implementation of eHealth and mHealth services in critical domains. We identify and discuss scientific, engineering, and implementation-related challenges that need to be overcome to move research, development, and the market forward. Results Several important advances have been identified in the fields of systems for personalized health monitoring, such as smartphone platforms and intelligent ubiquitous services. Sensors embedded in smartphones and clothes are making the unobtrusive recognition of physical activity, behavior, and lifestyle possible, and thus the deployment of platforms for health assistance and citizen empowerment. Similarly, significant advances are observed in the domain of infrastructure supporting services. Still, many technical problems remain to be solved, combined with no less challenging issues related to security, privacy, trust, and organizational dynamics. Conclusions Delivering innovative ubiquitous eHealth and mHealth services, including citizen-centered wellness and lifestyle management services, goes well beyond the development of technical solutions. For the large-scale information and communication technology-supported adoption of healthier lifestyles to take place, crucial innovations are needed in the process of making and deploying usable empowering end-user services that are trusted and user-acceptable. Such innovations require multidomain, multilevel, transdisciplinary work, grounded in theory but driven by citizens’ and health care professionals’ needs, expectations, and capabilities and matched by business ability to bring innovation to the market. PMID:27342137

Value-Based Pricing and Reimbursement in Personalised Healthcare: Introduction to the Basic Health Economics.

PubMed

Garrison, Louis P; Towse, Adrian

2017-09-04

'Value-based' outcomes, pricing, and reimbursement are widely discussed as health sector reforms these days. In this paper, we discuss their meaning and relationship in the context of personalized healthcare, defined as receipt of care conditional on the results of a biomarker-based diagnostic test. We address the question: "What kinds of pricing and reimbursement models should be applied in personalized healthcare?" The simple answer is that competing innovators and technology adopters should have incentives that promote long-term dynamic efficiency. We argue that-to meet this social objective of optimal innovation in personalized healthcare-payers, as agents of their plan participants, should aim to send clear signals to their suppliers about what they value. We begin by revisiting the concept of value from an economic perspective, and argue that a broader concept of value is needed in the context of personalized healthcare. We discuss the market for personalized healthcare and the interplay between price and reimbursement. We close by emphasizing the potential barrier posed by inflexible or cost-based reimbursement systems, especially for biomarker-based predictive tests, and how these personalized technologies have global public goods characteristics that require global value-based differential pricing to achieve dynamic efficiency in terms of the optimal rate of innovation and adoption.

Innovations for competitiveness: European views on "better-faster-cheaper"

NASA Astrophysics Data System (ADS)

Atzei, A.; Groepper, P.; Novara, M.; Pseiner, K.

1999-09-01

The paper elaborates on " lessons learned" from two recent ESA workshops, one focussing on the role of Innovation in the competitiveness of the space sector and the second on technology and engineering aspects conducive to better, faster and cheaper space programmes. The paper focuses primarily on four major aspects, namely: a) the adaptations of industrial and public organisations to the global market needs; b) the understanding of the bottleneck factors limiting competitiveness; c) the trends toward new system architectures and new engineering and production methods; d) the understanding of the role of new technology in the future applications. Under the pressure of market forces and the influence of many global and regional players, applications of space systems and technology are becoming more and more competitive. It is well recognised that without major effort for innovation in industrial practices, organisations, R&D, marketing and financial approaches the European space sector will stagnate and loose its competence as well as its competitiveness. It is also recognised that a programme run according to the "better, faster, cheaper" philosophy relies on much closer integration of system design, development and verification, and draws heavily on a robust and comprehensive programme of technology development, which must run in parallel and off-line with respect to flight programmes. A company's innovation capabilities will determine its future competitive advantage (in time, cost, performance or value) and overall growth potential. Innovation must be a process that can be counted on to provide repetitive, sustainable, long-term performance improvements. As such, it needs not depend on great breakthroughs in technology and concepts (which are accidental and rare). Rather, it could be based on bold evolution through the establishment of know-how, application of best practices, process effectiveness and high standards, performance measurement, and attention to customers and professional marketing. Having a technological lead allows industry to gain a competitive advantage in performance, cost and opportunities. Instrumental to better competitiveness is an R&D effort based on the adaptation of high technology products, capable of capturing new users, increasing production, decreasing the cost and delivery time and integrating high level of intelligence, information and autonomy. New systems will have to take in to account from the start what types of technologies are being developed or are already available in other areas outside space, and design their system accordingly. The future challenge for "faster, better, cheaper" appears to concern primarily "cost-effective", performant autonomous spacecraft, "cost-effective", reliable launching means and intelligent data fusion technologies and robust software serving mass- market real time services, distributed via EHF bands and Internet. In conclusion, it can be noticed that in the past few years new approaches have considerably enlarged the ways in which space missions can be implemented. They are supported by true innovations in mission concepts, system architecture, development and technologies, in particular for the development of initiatives based on multi-mission mini-satellites platforms for communication and Earth observation missions. There are also definite limits to cost cutting (such as lowering heads counts and increasing efficiency), and therefore the strategic perspective must be shifted from the present emphasis on cost-driven enhancement to revenue-driven improvements for growth. And since the product life-cycle is continuously shortening, competitiveness is linked very strongly with the capability to generate new technology products which enhance cost/benefit performance.

Innovative technologies to manage aflatoxins in foods and feeds and the profitability of application - A review.

PubMed

Udomkun, Patchimaporn; Wiredu, Alexander Nimo; Nagle, Marcus; Müller, Joachim; Vanlauwe, Bernard; Bandyopadhyay, Ranajit

2017-06-01

Aflatoxins are mainly produced by certain strains of Aspergillus flavus , which are found in diverse agricultural crops. In many lower-income countries, aflatoxins pose serious public health issues since the occurrence of these toxins can be considerably common and even extreme. Aflatoxins can negatively affect health of livestock and poultry due to contaminated feeds. Additionally, they significantly limit the development of international trade as a result of strict regulation in high-value markets. Due to their high stability, aflatoxins are not only a problem during cropping, but also during storage, transport, processing, and handling steps. Consequently, innovative evidence-based technologies are urgently required to minimize aflatoxin exposure. Thus far, biological control has been developed as the most innovative potential technology of controlling aflatoxin contamination in crops, which uses competitive exclusion of toxigenic strains by non-toxigenic ones. This technology is commercially applied in groundnuts maize, cottonseed, and pistachios during pre-harvest stages. Some other effective technologies such as irradiation, ozone fumigation, chemical and biological control agents, and improved packaging materials can also minimize post-harvest aflatoxins contamination in agricultural products. However, integrated adoption of these pre- and post-harvest technologies is still required for sustainable solutions to reduce aflatoxins contamination, which enhances food security, alleviates malnutrition, and strengthens economic sustainability.

75 FR 61519 - NASA Advisory Council; Technology and Innovation Committee; Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-05

... and Innovation Committee; Meeting AGENCY: National Aeronautics and Space Administration. ACTION... Innovation Committee of the NASA Advisory Council. The meeting will be held for the purpose of reviewing the Space Technology Program planning and review innovation activities at NASA's Langley Research Center...

Foresight Study on the Risk Governance of New Technologies: The Case of Nanotechnology.

PubMed

Read, Sheona A K; Kass, Gary S; Sutcliffe, Hilary R; Hankin, Steven M

2016-05-01

Technology-led innovation represents an important driver of European economic and industrial competitiveness and offers solutions to societal challenges. In order to facilitate responsible innovation and public acceptance, a need exists to identify and implement oversight approaches focused on the effective risk governance of emerging technologies. This article describes a foresight study on the governance of new technologies, using nanotechnology as a case example. Following a mapping of the governance landscape, four plausible foresight scenarios were developed, capturing critical uncertainties for nanotechnology governance. Key governance elements were then stress tested within these scenarios to see how well they might perform in a range of possible futures and to inform identification of the strengths, weaknesses, opportunities, and threats for nanotechnology governance in Europe. Based on the study outcomes, recommendations are proposed regarding the development of governance associated with the responsible development of new technologies. © 2015 Society for Risk Analysis.

Technological advances in the treatment of trauma: a review of promising practices.

PubMed

Paul, Lisa A; Hassija, Christina M; Clapp, Joshua D

2012-11-01

Given the availability of empirically supported practices for addressing posttraumatic stress disorder and other forms of trauma-related distress, the development and implementation of new technology to deliver these treatments is exciting. Technological innovations in this literature aim to expand availability of empirically based intervention, increase treatment adherence and acceptability, and overcome barriers commonly encountered with conventional trauma-focused treatment. Much of the current research on these technological developments consists of brief reviews and case studies of the separate therapy modalities. Although this work serves to document the appeal and utility of these innovations, it does not provide comprehensive information about the host of options available. To that end, the three general categories of technological advances in trauma therapy (i.e., videoconferencing, e-Health, virtual reality) are reviewed here, including information regarding their empirical support and suggestions for future research and clinical practice.

Extending green technology innovations to enable greener fabs

NASA Astrophysics Data System (ADS)

Takahisa, Kenji; Yoo, Young Sun; Fukuda, Hitomi; Minegishi, Yuji; Enami, Tatsuo

2015-03-01

Semiconductor manufacturing industry has growing concerns over future environmental impacts as fabs expand and new generations of equipment become more powerful. Especially rare gases supply and price are one of prime concerns for operation of high volume manufacturing (HVM) fabs. Over the past year it has come to our attention that Helium and Neon gas supplies could be unstable and become a threat to HVM fabs. To address these concerns, Gigaphoton has implemented various green technologies under its EcoPhoton program. One of the initiatives is GigaTwin deep ultraviolet (DUV) lithography laser design which enables highly efficient and stable operation. Under this design laser systems run with 50% less electric energy and gas consumption compared to conventional laser designs. In 2014 we have developed two technologies to further reduce electric energy and gas efficiency. The electric energy reduction technology is called eGRYCOS (enhanced Gigaphoton Recycled Chamber Operation System), and it reduces electric energy by 15% without compromising any of laser performances. eGRYCOS system has a sophisticated gas flow design so that we can reduce cross-flow-fan rotation speed. The gas reduction technology is called eTGM (enhanced Total gas Manager) and it improves gas management system optimizing the gas injection and exhaust amount based on laser performances, resulting in 50% gas savings. The next steps in our roadmap technologies are indicated and we call for potential partners to work with us based on OPEN INNOVATION concept to successfully develop faster and better solutions in all possible areas where green innovation may exist.

THE SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM: PROGRESS AND ACCOMPLISHMENTS - FISCAL YEAR 1990 A FOURTH REPORT TO CONGRESS

EPA Science Inventory

The SITE Program was the first major program for demonstrating and evaluating fullscale innovative treatment technologies at hazardous waste sites. Having concluded its fourth year, the SITE Program is recognized as a leading advocate of innovative technology development and comm...

40 CFR 35.2211 - Field testing for Innovative and Alternative Technology Report.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Treatment Works § 35.2211 Field testing for Innovative and Alternative Technology Report. The grantee shall... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Field testing for Innovative and Alternative Technology Report. 35.2211 Section 35.2211 Protection of Environment ENVIRONMENTAL PROTECTION...

40 CFR 35.2211 - Field testing for Innovative and Alternative Technology Report.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Treatment Works § 35.2211 Field testing for Innovative and Alternative Technology Report. The grantee shall... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Field testing for Innovative and Alternative Technology Report. 35.2211 Section 35.2211 Protection of Environment ENVIRONMENTAL PROTECTION...

40 CFR 35.2211 - Field testing for Innovative and Alternative Technology Report.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Treatment Works § 35.2211 Field testing for Innovative and Alternative Technology Report. The grantee shall... 40 Protection of Environment 1 2012-07-01 2012-07-01 false Field testing for Innovative and Alternative Technology Report. 35.2211 Section 35.2211 Protection of Environment ENVIRONMENTAL PROTECTION...

40 CFR 35.2211 - Field testing for Innovative and Alternative Technology Report.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Treatment Works § 35.2211 Field testing for Innovative and Alternative Technology Report. The grantee shall... 40 Protection of Environment 1 2013-07-01 2013-07-01 false Field testing for Innovative and Alternative Technology Report. 35.2211 Section 35.2211 Protection of Environment ENVIRONMENTAL PROTECTION...

40 CFR 35.2211 - Field testing for Innovative and Alternative Technology Report.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Treatment Works § 35.2211 Field testing for Innovative and Alternative Technology Report. The grantee shall... 40 Protection of Environment 1 2014-07-01 2014-07-01 false Field testing for Innovative and Alternative Technology Report. 35.2211 Section 35.2211 Protection of Environment ENVIRONMENTAL PROTECTION...

Science, Technology and Innovation in Uganda

ERIC Educational Resources Information Center

Brar, Sukhdeep; Farley, Sara E.; Hawkins, Robert; Wagner, Caroline S.

2010-01-01

Science, Technology and Innovation in Uganda is part of the World Bank Studies series. These papers are published to communicate the results of the Bank's ongoing research and to stimulate public discussion. This study presents a unique methodology to view science, technology and innovation (STI) in developing countries. The study provides a set…

Research on Capturing of Customer Requirements Based on Innovation Theory

NASA Astrophysics Data System (ADS)

junwu, Ding; dongtao, Yang; zhenqiang, Bao

To exactly and effectively capture customer requirements information, a new customer requirements capturing modeling method was proposed. Based on the analysis of function requirement models of previous products and the application of technology system evolution laws of the Theory of Innovative Problem Solving (TRIZ), the customer requirements could be evolved from existing product designs, through modifying the functional requirement unit and confirming the direction of evolution design. Finally, a case study was provided to illustrate the feasibility of the proposed approach.

[Communication management of collaborative networks of science, technology and innovation in health].

PubMed

Martins, Wagner de Jesus; Artmann, Elizabeth; Rivera, Francisco Javier Uribe

2012-12-01

The objective of the article was to propose a model of communication management of networks for the Health Innovation System in Brazil. The health production complex and its relationship with the nation's development are addressed and some suggestions for operationalization of the proposed model are also presented. The discussion is based on Habermas' theory and similar cases from other countries. Communication strategies and approaches to commitment dialogue for concerted actions and consensus-building based on critical reasoning may help strengthen democratic networks.

Effects of Market, E-Marketing, and Technology Orientations on Innovativeness and Performance in Turkish Health Organizations.

PubMed

Mutlu, Hanifi Murat; Sürer, Atilla

2015-01-01

This article investigates the effects of strategic orientation on innovativeness and performance in health organizations in Turkey. We hypothesize that market, e-marketing, and technology orientations positively affect innovativeness and performance. Market and technology orientations are found not have a significant effect on performance, but e-marketing orientation and innovativeness have a significant and positive effect. We also investigate indirect effects on innovativeness and performance. The analyses of direct and indirect effects are an important contribution to understanding relationships among research variables.

Effects of market, e-marketing, and technology orientations on innovativeness and performance in Turkish health organizations.

PubMed

Mutlu, Hanifi Murat; Sürer, Atilla

2016-01-01

This article investigates the effects of strategic orientation on innovativeness and performance in health organizations in Turkey. We test hypotheses that market, e-marketing, and technology orientations positively affect innovativeness and performance. Market and technology orientations are found not have a significant effect on performance, but e-marketing orientation and innovativeness have a significant and positive effect. We also investigate indirect effects on innovativeness and performance. The analyses of direct and indirect effects are an important contribution to understanding relationships among research variables.

Educational Technology: Computer-Based Instruction. Hearing before the Subcommittee on Technology and Competitiveness of the Committee on Science, Space, and Technology. U.S. House of Representatives, One Hundred Second Congress, First Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Science, Space and Technology.

This hearing on computer assisted instruction and the use of educational technology in classrooms was held in response to a presidential request that instructional innovation be given special attention, particularly in science and mathematics education, in every congressional district. This transcript of the hearing includes statements presented…

PNAUM: integrated approach to Pharmaceutical Services, Science, Technology and Innovation

PubMed Central

Gadelha, Carlos Augusto Grabois; Costa, Karen Sarmento; do Nascimento, José Miguel; Soeiro, Orlando Mário; Mengue, Sotero Serrate; da Motta, Márcia Luz; de Carvalho, Antônio Carlos Campos

2016-01-01

ABSTRACT This paper describes the development process of the Pesquisa Nacional sobre Acesso, Utilização e Promoção do Uso Racional de Medicamentos (PNAUM – National Survey on Access, Use and Promotion of Rational Use of Medicines) based on an integrated approach to pharmaceutical services, science, technology and innovation. It starts by contextualizing health and development in Brazil and features elements of the National Policy for Science, Technology and Innovation in Health in Brazil and the National Policy for Pharmaceutical Services. On presenting pharmaceutical policy guidelines, it stresses the lack of nationwide data. This survey, commissioned by the Brazilian Ministry of Health, has two components: household survey and evaluation of pharmaceutical services in primary care. The findings point to perspectives that represent, besides the enhancement of public policy for pharmaceutical services and public health, results of government action aimed at developing the economic and industrial health care complex to improve the health conditions of the Brazilian population. PMID:27982379

DEMETERRES project: development of innovative technologies for removing radionuclides from contaminated solid and liquid matrices

NASA Astrophysics Data System (ADS)

Chagvardieff, Pierre; Barré, Yves; Blin, Virginie; Faure, Sylvain; Fornier, Anne; Grange, Didier; Grandjean, Agnès; Guiderdoni, Emmanuel; Henner, Pascale; Siroux, Brice; Leybros, Antoine; Messalier, Marc; Paillard, Hervé; Prévost, Thierry; Rennesson, Malvina; Sarrobert, Catherine; Vavasseur, Alain; Véry, Anne-Aliénor

2017-09-01

As part of the « post-accidental » management, the DEMETERRES project (RSNR PIA) proposes to develop innovative and environmentally friendly methods for removal of cesium and strontium from soils and liquid matrices in order to rehabilitate them for an agricultural use while minimizing the volume of generated wastes in accordance with the nuclear waste existing processes. Complementary approaches are used: they are based on physico-chemical technologies (such as foams flotation, supercritical CO2 extraction, extractants in fluidized bed reactor …) and biological ones (bioextractants, phytoextraction) which concepts are described. These researches aim to design innovative and performing extractants in term of selectivity and to achieve the pilot reactor phase for each of them. These pilots will group in a network to provide a technological platform lasting the project, to which will be attached an available network of experts. The respective advances of these researches are presented, completed of tests initiated in Japan on contaminated soils through partnerships.

Exploring the Role of Instructional Technology in Course Planning and Classroom Teaching: Implications for Pedagogical Reform

ERIC Educational Resources Information Center

Hora, Matthew T.; Holden, Jeremiah

2013-01-01

Instructional technology plays a key role in many teaching reform efforts at the postsecondary level, yet evidence suggests that faculty adopt these technology-based innovations in a slow and inconsistent fashion. A key to improving these efforts is to understand local practice and use these insights to design more locally attuned interventions.…

Using ICT for Training Teachers in Design and Technology Education (TTDTE)

ERIC Educational Resources Information Center

Thorsteinsson, Gísli

2012-01-01

The paper outlines the TTPTE project (2010-2011) which was based on the need for innovative and effective ideas for increasing the efficiency of teachers' in design and technology daily work. The project was aimed at finding new ways of how to support in-service teachers in design and technology education and how teachers themselves can upgrade…

Problem Solving in Technology-Rich Environments. A Report from the NAEP Technology-Based Assessment Project, Research and Development Series. NCES 2007-466

ERIC Educational Resources Information Center

Bennett, Randy Elliot; Persky, Hilary; Weiss, Andrew R.; Jenkins, Frank

2007-01-01

The Problem Solving in Technology-Rich Environments (TRE) study was designed to demonstrate and explore innovative use of computers for developing, administering, scoring, and analyzing the results of National Assessment of Educational Progress (NAEP) assessments. Two scenarios (Search and Simulation) were created for measuring problem solving…

Influences of Government Championship on the Technology Innovation Process at the Project-level

NASA Astrophysics Data System (ADS)

Yue, Xin

Government support is a popular instrument to foster technology innovation. It can take various forms such as financial aid, tax credits, and technological assistance. Along with the firm characteristics, strategic behavior of the project team, characteristics of the technology and the market, and the regulatory environment, government support influences firms' research and development (R&D) motivations, decision making process, and hence technology development performance. How government support influences the performance in different industries is an important policy and research question. There are many studies on the effectiveness and impacts of government support, mostly at program-level or industry-level. Government Championship is a form of government support distinct from direct financial or technological assistance. Championship includes expressing confidence in the innovation, encouraging others to support the innovation, and persisting under adversity. Championship has been studied as a critical inside factor for innovation success, particularly at project-level. Usually a champion emerged within the organization responsible for the innovation project. However, with the intention to encourage technology development, governments can also play a championship role. Government championship, besides government financial and technological assistance (hereafter "government F&T"), could be one major category of government support to facilitate high-technology innovation. However, there are few studies focusing on the effectiveness of government championship, and how it influences the innovation process. This thesis addresses this question through two studies on high-technology development projects. The first study has tested the effectiveness of government championship on the performance of 431 government sponsored technology innovation projects. Government championship and government F&T, as well as project team strategic behavior, are hypothesized to influence the technology innovation performance. The team strategy has two dimensions in this model: pro-activeness and defensiveness, which indicate the emphasis of the team on exploiting new opportunities, and enhancing the current methods, respectively. A survey was administered to the project managers of li-ion battery projects in the United States. After data was collected, factor analysis and regression were used to test hypotheses. The results suggest that both government championship and government F&T are positive factors in technology innovation performance, while strategic behaviors are positive and more significant. The results also suggest a strong correlation between government support (both championship and F&T assistance) and the R&D team strategy, which means government intervention and team strategic behavior could affect each other. To understand how the government champions and the project team impact each other during the project, the second study employed a single in-depth case study, investigating the Shenhua Direct-Coal-Liquefaction (DCL) Project. A variety of government championship behaviors have been identified, and their situation and impacts on the project performance and outcome were analyzed. This case is a good start to accumulate information and observations for a better understanding of the influences of government championship in technology innovation. These two studies will help increase understanding of how government championship behaviors influence the process, the project performance, and the outcome of technology innovation, particularly in high-technology industries.

75 FR 79423 - NASA Advisory Council; Technology and Innovation Committee; Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-20

... and Innovation Committee; Meeting AGENCY: National Aeronautics and Space Administration. ACTION... Innovation Committee of the NASA Advisory Council. The meeting will be held for the purpose of reviewing the Space Technology Program planning and review innovation activities at NASA's Kennedy Space Center (KSC...

Three Perspectives on Innovation--the Technological, the Political, and the Cultural. Draft.

ERIC Educational Resources Information Center

House, Ernest R.

Awareness of the three analytical perspectives on educational innovation leads to better understanding of educational change processes and better innovation strategies and policies. The three perspectives--technological, political, and cultural--are "screens" of facts, values, and presuppositions through which analysts view innovation.…

An Action Learning Method for Increased Innovation Capability in Organisations

ERIC Educational Resources Information Center

Olsson, Annika; Wadell, Carl; Odenrick, Per; Norell Bergendahl, Margareta

2010-01-01

Product innovation in highly complex and technological areas, such as medical technology, puts high requirements on the innovation capability of an organisation. Previous research and publications have highlighted organisational issues and learning matters as important and necessary for the development of innovation capability. Action learning…

Trends in Research on Project-Based Science and Technology Teaching and Learning at K-12 Levels: A Systematic Review

ERIC Educational Resources Information Center

Hasni, Abdelkrim; Bousadra, Fatima; Belletête, Vincent; Benabdallah, Ahmed; Nicole, Marie-Claude; Dumais, Nancy

2016-01-01

Project-based teaching is nothing new; it originates from the work of authors like Dewey and Kilpatrick. Recent decades have seen renewed interest in this approach. In many countries, it is currently considered to be an innovative approach to science and technology (S&T) teaching. In this article, we present a systematic review of what recent…

75 FR 69575 - Permission To Use Air Inflation of Meat Carcasses and Parts

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-15

... introducing new air inflation technology and procedures will likely spur technological innovation that will provide this new technology to additional meat establishments. Greater technological innovation more...

Reform in Undergraduate Science, Technology, Engineering, and Mathematics: The Classroom Context

ERIC Educational Resources Information Center

Stage, Frances K.; Kinzie, Jillian

2009-01-01

This article reports the results of a series of site visits examining modifications to science, technology, engineering, and mathematics (STEM) teaching and learning based on reform on three differing campuses. Innovations in stem classrooms included collaborative approaches to learning; incorporation of active learning, authentic contexts, peer…

Hawai'i DOE On-Line

ERIC Educational Resources Information Center

Kajioka, Vicki; Shiroma, Donna; Tisdell, Debi; Kanemori, Lena; Tsuda, Jean

2002-01-01

The E-School Technology Innovation Challenge Grant of 1996 was the genesis of the Department of Education's (DOE's) efforts to initiate a multi-prong approach to bring standards-based curriculum to the children of Hawai'i and use technology to upgrade professional development for its teachers. In this article, the authors describe how various…

Enhancement of Teaching-Learning Process through Multimedia Technology

ERIC Educational Resources Information Center

Charles, R.

2011-01-01

The Indian educational system has to meet the challenges of knowledge explosion and its requirement of increased enrolment in higher education. Computer and technology plays a pre-dominant role to meet out its challenges. Recent innovative Educational approach recommends self and sensory oriented instruction. Computer based multimedia is a tool…

The World's the Limit in the Virtual High School.

ERIC Educational Resources Information Center

Berman, Sheldon; Tinker, Robert

1997-01-01

Assisted by a U.S. Department of Education Technology Innovation Challenge Grant, the Hudson (Massachusetts) Public Schools, the Concord Consortium Educational Technology Lab, and 30 collaborating high schools across the nation have developed a virtual high school over the Internet. Through Internet-based courses, Virtual High School significantly…

School Technology Leadership in a Spanish Secondary School: The TEI Model

ERIC Educational Resources Information Center

Gallego-Arrufat, María-Jesús; Gutiérrez-Santiuste, Elba; Campaña-Jiménez, Rafael Luis

2017-01-01

This study analyzes the perception that teachers and management team members in secondary school education have of "technology-based educational innovation" (TEI). Two questionnaires and in-depth interviews permit us to analyze leaders' perspective of planning, development, and evaluation. The school leaders' view diverges from that of…

LOW TEMPERATURE THERMAL TREATMENT (LT3®) TECHNOLOGY - ROY F. WESTON, INC. - APPLICATIONS ANALYSIS REPORT

EPA Science Inventory

This report evaluates the Low Temperature Thermal Treatment (LT³®) system's ability to remove VOC and SVOC compounds from solid wastes. This evaluation is based on treatment performance and cost data from the Superfund Innovative Technology (SITE) demonstration and fi...

Quality-Improving Strategies of College English Teaching Based on Microlesson and Flipped Classroom

ERIC Educational Resources Information Center

Zhang, Fan

2017-01-01

Microlesson and flipped classroom, which incorporate the educational information technologies, are a new trend of college English teaching. Exploration on how the flipped classroom and microlesson promote innovation and application of educational information technology are of great significance. According to a survey among teachers, strategies…