29 CFR 1926.408 - Special systems.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Electrical Installation Safety Requirements § 1926... electrical connections. The enclosure shall have provision for locking so only authorized qualified persons... as substations, trailers, cars, mobile shovels, draglines, hoists, drills, dredges, compressors...

29 CFR 1926.408 - Special systems.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Electrical Installation Safety Requirements § 1926... electrical connections. The enclosure shall have provision for locking so only authorized qualified persons... as substations, trailers, cars, mobile shovels, draglines, hoists, drills, dredges, compressors...

33 CFR 183.560 - Hose clamps: Installation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Hose clamps: Installation. 183.560 Section 183.560 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Fuel Systems Manufacturer Requirements § 183.560...

49 CFR 213.343 - Continuous welded rail (CWR).

Code of Federal Regulations, 2010 CFR

2010-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Train Operations at Track Classes 6 and...) Designation of a desired rail installation temperature range for the geographic area in which the CWR is... installation temperature range when adjusting CWR. (b) Rail anchoring or fastening requirements that will...

29 CFR 1910.216 - Mills and calenders in the rubber and plastics industries.

Code of Federal Regulations, 2011 CFR

2011-07-01

... readily by pressure of the mill operator's body. (ii) Safety triprod. Installed in the front and in the.... 1910.216 Section 1910.216 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Machinery and Machine...

29 CFR 1926.404 - Wiring design and protection.

Code of Federal Regulations, 2013 CFR

2013-07-01

... tracks of electrically operated cranes; frames of nonelectrically driven elevator cars to which electric..., DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Electrical Installation Safety... conductors, transformers, or other electric equipment, unless such equipment is controlled by a disconnecting...

29 CFR 1926.404 - Wiring design and protection.

Code of Federal Regulations, 2012 CFR

2012-07-01

... tracks of electrically operated cranes; frames of nonelectrically driven elevator cars to which electric..., DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Electrical Installation Safety... conductors, transformers, or other electric equipment, unless such equipment is controlled by a disconnecting...

47 CFR 80.1083 - Ship radio installations.

Code of Federal Regulations, 2010 CFR

2010-10-01

....1083 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES... equipment and systems; (2) Be so located as to ensure the greatest possible degree of safety and operational... permit radio-communications from the wings of the navigating bridge. Portable VHF equipment may be used...

47 CFR 90.421 - Operation of mobile station units not under the control of the licensee.

Code of Federal Regulations, 2014 CFR

2014-10-01

... (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PRIVATE LAND MOBILE RADIO SERVICES Operating Requirements § 90... unauthorized operation of such units not under its control. (a) Public Safety Pool. (1) Mobile units licensed in the Public Safety Pool may be installed in any vehicle which in an emergency would require...

29 CFR 1910.163 - Fixed extinguishing systems, water spray and foam.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Section 1910.163 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Fire Protection Fixed Fire... extinguishing agent, installed to meet a particular OSHA standard. These systems shall also comply with § 1910...

29 CFR 1910.163 - Fixed extinguishing systems, water spray and foam.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Section 1910.163 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Fire Protection Fixed Fire... extinguishing agent, installed to meet a particular OSHA standard. These systems shall also comply with § 1910...

Structural considerations for solar installers : an approach for small, simplified solar installations or retrofits.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richards, Elizabeth H.; Schindel, Kay; Bosiljevac, Tom

2011-12-01

Structural Considerations for Solar Installers provides a comprehensive outline of structural considerations associated with simplified solar installations and recommends a set of best practices installers can follow when assessing such considerations. Information in the manual comes from engineering and solar experts as well as case studies. The objectives of the manual are to ensure safety and structural durability for rooftop solar installations and to potentially accelerate the permitting process by identifying and remedying structural issues prior to installation. The purpose of this document is to provide tools and guidelines for installers to help ensure that residential photovoltaic (PV) power systemsmore » are properly specified and installed with respect to the continuing structural integrity of the building.« less

33 CFR 183.532 - Clips, straps, and hose clamps.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Fuel Systems Equipment Standards § 183.532 Clips... under § 183.590, a hose clamp installed on a fuel line system requiring metallic fuel lines or “USCG...

76 FR 53648 - Federal Motor Vehicle Safety Standards: Occupant Crash Protection

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-29

... when the continuous motion of spooling the belt out is stopped. From that point, the seat belt cannot... reaction to LATCH found that drivers who preferred installing a CRS with seat belt as opposed to LATCH...

47 CFR 80.1151 - Voluntary radio operations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Voluntary radio operations. 80.1151 Section 80.1151 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Voluntary Radio Installations General § 80.1151 Voluntary radio...

47 CFR 80.911 - VHF transmitter.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 5 2012-10-01 2012-10-01 false VHF transmitter. 80.911 Section 80.911 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Compulsory Radiotelephone Installations for Small Passenger Boats § 80.911 VHF...

47 CFR 80.911 - VHF transmitter.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 5 2011-10-01 2011-10-01 false VHF transmitter. 80.911 Section 80.911 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Compulsory Radiotelephone Installations for Small Passenger Boats § 80.911 VHF...

47 CFR 80.911 - VHF transmitter.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 5 2013-10-01 2013-10-01 false VHF transmitter. 80.911 Section 80.911 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Compulsory Radiotelephone Installations for Small Passenger Boats § 80.911 VHF...

47 CFR 80.911 - VHF transmitter.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 5 2014-10-01 2014-10-01 false VHF transmitter. 80.911 Section 80.911 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Compulsory Radiotelephone Installations for Small Passenger Boats § 80.911 VHF...

47 CFR 80.1181 - Station identification.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 5 2011-10-01 2011-10-01 false Station identification. 80.1181 Section 80.1181 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Voluntary Radio Installations On-Board Communications § 80.1181 Station identification...

47 CFR 80.1181 - Station identification.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 5 2013-10-01 2013-10-01 false Station identification. 80.1181 Section 80.1181 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Voluntary Radio Installations On-Board Communications § 80.1181 Station identification...

47 CFR 80.1181 - Station identification.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Station identification. 80.1181 Section 80.1181 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Voluntary Radio Installations On-Board Communications § 80.1181 Station identification...

47 CFR 80.1181 - Station identification.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 5 2014-10-01 2014-10-01 false Station identification. 80.1181 Section 80.1181 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Voluntary Radio Installations On-Board Communications § 80.1181 Station identification...

47 CFR 80.1181 - Station identification.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 5 2012-10-01 2012-10-01 false Station identification. 80.1181 Section 80.1181 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Voluntary Radio Installations On-Board Communications § 80.1181 Station identification...

49 CFR 195.130 - Fabricated assemblies.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 3 2013-10-01 2013-10-01 false Fabricated assemblies. 195.130 Section 195.130 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Design Requirements § 195.130 Fabricated assemblies. Each fabricated assembly to be installed in a...

49 CFR 195.130 - Fabricated assemblies.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Fabricated assemblies. 195.130 Section 195.130 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Design Requirements § 195.130 Fabricated assemblies. Each fabricated assembly to be installed in a...

49 CFR 195.130 - Fabricated assemblies.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Fabricated assemblies. 195.130 Section 195.130 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Design Requirements § 195.130 Fabricated assemblies. Each fabricated assembly to be installed in a...

49 CFR 195.130 - Fabricated assemblies.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 3 2012-10-01 2012-10-01 false Fabricated assemblies. 195.130 Section 195.130 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Design Requirements § 195.130 Fabricated assemblies. Each fabricated assembly to be installed in a...

49 CFR 195.130 - Fabricated assemblies.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 3 2014-10-01 2014-10-01 false Fabricated assemblies. 195.130 Section 195.130 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Design Requirements § 195.130 Fabricated assemblies. Each fabricated assembly to be installed in a...

49 CFR 195.206 - Material inspection.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Material inspection. 195.206 Section 195.206 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Construction § 195.206 Material inspection. No pipe or other component may be installed in a...

49 CFR 195.206 - Material inspection.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Material inspection. 195.206 Section 195.206 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Construction § 195.206 Material inspection. No pipe or other component may be installed in a...

49 CFR 195.206 - Material inspection.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 3 2013-10-01 2013-10-01 false Material inspection. 195.206 Section 195.206 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Construction § 195.206 Material inspection. No pipe or other component may be installed in a...

10 CFR 51.61 - Environmental report-independent spent fuel storage installation (ISFSI) or monitored retrievable...

Code of Federal Regulations, 2010 CFR

2010-01-01

... NUCLEAR REGULATORY COMMISSION (CONTINUED) ENVIRONMENTAL PROTECTION REGULATIONS FOR DOMESTIC LICENSING AND RELATED REGULATORY FUNCTIONS National Environmental Policy Act-Regulations Implementing Section 102(2... Control Desk, Director, Office of Nuclear Material Safety and Safeguards, a separate document entitled...

New safety rules challenge U. K. operators, regulators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hudson, J.

1994-08-15

Offshore safety regulations based on lessons learned from the Piper Alpha blast of 1988 have been in operation in the U.K. for a year. The Offshore Installations (Safety Case) Regulations 1992 make operators of fixed and mobile installations (the duty holders'') responsible for producing a formal safety assessment, or safety case, for each installation. After the end of November 1995 it will be an offense to operate an installation without a safety case which has been approved by the government's Health and Safety Executive (HSE). Producing safety cases for installations is a major task for duty holder, while assessing themmore » is a huge under taking for HSE's Offshore Safety Division (OSD). This paper reviews how HSE has established management arrangements to handle safety cases, considers progress in assessment, highlights some of the important lessons learned, and look to the future.« less

47 CFR 80.1153 - Station log and radio watches.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Station log and radio watches. 80.1153 Section 80.1153 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Voluntary Radio Installations General § 80.1153 Station log and...

32 CFR 636.2 - Program objectives.

Code of Federal Regulations, 2011 CFR

2011-07-01

... provisions of AR 190-22 and AR 210-10. This part is not applicable to vehicle safety inspections and spot... is defined as any mobile object capable of transporting objects or people (e.g., automobile, truck... member's installation driving privilege for cause (e.g., continued minor driving infractions, numerous...

32 CFR 636.2 - Program objectives.

Code of Federal Regulations, 2014 CFR

2014-07-01

... provisions of AR 190-22 and AR 210-10. This part is not applicable to vehicle safety inspections and spot... is defined as any mobile object capable of transporting objects or people (e.g., automobile, truck... member's installation driving privilege for cause (e.g., continued minor driving infractions, numerous...

32 CFR 636.2 - Program objectives.

Code of Federal Regulations, 2013 CFR

2013-07-01

... provisions of AR 190-22 and AR 210-10. This part is not applicable to vehicle safety inspections and spot... is defined as any mobile object capable of transporting objects or people (e.g., automobile, truck... member's installation driving privilege for cause (e.g., continued minor driving infractions, numerous...

32 CFR 636.2 - Program objectives.

Code of Federal Regulations, 2012 CFR

2012-07-01

... provisions of AR 190-22 and AR 210-10. This part is not applicable to vehicle safety inspections and spot... is defined as any mobile object capable of transporting objects or people (e.g., automobile, truck... member's installation driving privilege for cause (e.g., continued minor driving infractions, numerous...

32 CFR 636.2 - Program objectives.

Code of Federal Regulations, 2010 CFR

2010-07-01

... provisions of AR 190-22 and AR 210-10. This part is not applicable to vehicle safety inspections and spot... is defined as any mobile object capable of transporting objects or people (e.g., automobile, truck... member's installation driving privilege for cause (e.g., continued minor driving infractions, numerous...

30 CFR 75.342 - Methane monitors.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Methane monitors. 75.342 Section 75.342 Mineral... SAFETY STANDARDS-UNDERGROUND COAL MINES Ventilation § 75.342 Methane monitors. (a)(1) MSHA approved methane monitors shall be installed on all face cutting machines, continuous miners, longwall face...

49 CFR 192.377 - Service lines: Copper.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Service lines: Copper. 192.377 Section 192.377 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... § 192.377 Service lines: Copper. Each copper service line installed within a building must be protected...

49 CFR 192.377 - Service lines: Copper.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Service lines: Copper. 192.377 Section 192.377 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... § 192.377 Service lines: Copper. Each copper service line installed within a building must be protected...

49 CFR 195.254 - Above ground components.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Above ground components. 195.254 Section 195.254 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Construction § 195.254 Above ground components. (a) Any component may be installed above ground in...

49 CFR 195.254 - Above ground components.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Above ground components. 195.254 Section 195.254 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Construction § 195.254 Above ground components. (a) Any component may be installed above ground in...

30 CFR 75.342 - Methane monitors.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Methane monitors. 75.342 Section 75.342 Mineral... SAFETY STANDARDS-UNDERGROUND COAL MINES Ventilation § 75.342 Methane monitors. (a)(1) MSHA approved methane monitors shall be installed on all face cutting machines, continuous miners, longwall face...

FY 1991 safety program status report

NASA Technical Reports Server (NTRS)

1991-01-01

In FY 1991, the NASA Safety Division continued efforts to enhance the quality and productivity of its safety oversight function. Recent initiatives set forth in areas such as training, risk management, safety assurance, operational safety, and safety information systems have matured into viable programs contributing to the safety and success of activities throughout the Agency. Efforts continued to develop a centralized intra-agency safety training program with establishment of the NASA Safety Training Center at the Johnson Space Center (JSC). The objective is to provide quality training for NASA employees and contractors on a broad range of safety-related topics. Courses developed by the Training Center will be presented at various NASA locations to minimize travel and reach the greatest number of people at the least cost. In FY 1991, as part of the ongoing efforts to enhance the total quality of NASA's safety work force, the Safety Training Center initiated development of a Certified Safety Professional review course. This course provides a comprehensive review of the skills and knowledge that well-rounded safety professionals must possess to qualify for professional certification. FY 1992 will see the course presented to NASA and contractor employees at all installations via the NASA Video Teleconference System.

The cost-effectiveness of air bags by seating position.

PubMed

Graham, J D; Thompson, K M; Goldie, S J; Segui-Gomez, M; Weinstein, M C

1997-11-05

Motor vehicle crashes continue to cause significant mortality and morbidity in the United States. Installation of air bags in new passenger vehicles is a major initiative in the field of injury prevention. To assess the net health consequences and cost-effectiveness of driver's side and front passenger air bags from a societal perspective, taking into account the increased risk to children who occupy the front passenger seat and the diminished effectiveness for older adults. A deterministic state transition model tracked a hypothetical cohort of new vehicles over a 20-year period for 3 strategies: (1) installation of safety belts, (2) installation of driver's side air bags in addition to safety belts, and (3) installation of front passenger air bags in addition to safety belts and driver's side air bags. Changes in health outcomes, valued in terms of quality-adjusted life-years (QALYs) and costs (in 1993 dollars), were projected following the recommendations of the Panel on Cost-effectiveness in Health and Medicine. US population-based and convenience sample data were used. Incremental cost-effectiveness ratios. Safety belts are cost saving, even at 50% use. The addition of driver's side air bags to safety belts results in net health benefits at an incremental cost of $24000 per QALY saved. The further addition of front passenger air bags results in an incremental net benefit at a higher incremental cost of $61000 per QALY saved. Results were sensitive to the unit cost of air bag systems, their effectiveness, baseline fatality rates, the ratio of injuries to fatalities, and the real discount rate. Both air bag systems save life-years at costs that are comparable to many medical and public health practices. Immediate steps can be taken to enhance the cost-effectiveness of front passenger air bags, such as moving children to the rear seat.

29 CFR 1926.1438 - Overhead & gantry cranes.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 8 2011-07-01 2011-07-01 false Overhead & gantry cranes. 1926.1438 Section 1926.1438 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Cranes and Derricks in Construction § 1926.1438 Overhead & gantry cranes. (a) Permanently installed overhead and gantry cranes. The requirements of § 1910...

29 CFR 1926.702 - Requirements for equipment and tools.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Concrete and Masonry... the ejection system is not to be operated. (b) Concrete mixers. Concrete mixers with one cubic yard... the skip of materials; and (2) Guardrails installed on each side of the skip. (c) Power concrete...

A common sense approach to sprinklers.

PubMed

Passingham, Andy

2010-03-01

As debate continues over the importance of incorporating automatic sprinkler systems into healthcare facilities, Andy Passingham, associate director at Arup Fire, considers how Arup, the multi-disciplinary engineers for two high profile new Welsh hospitals under construction in Ebbw Vale and Caerphilly, addressed fire safety on both projects. He highlights how the installation of sprinklers should not only improve fire safety, but has also contributed to a number of wider design elements which should enhance the patient, staff, and visitor experience.

77 FR 27271 - Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-09

... performance of aircraft, engines, and propellers as may be required to ensure safety in air transportation...-approved parts are installed on type certificated aircraft, and that continued airworthiness is maintained..., repair stations, aircraft owner/ operators, air carriers, and the general public who wish to report...

VVER Reactor Safety in Eastern Europe and Former Soviet Union

NASA Astrophysics Data System (ADS)

Papadopoulou, Demetra

2012-02-01

VVER Soviet-designed reactors that operate in Eastern Europe and former Soviet republics have heightened international concern for years due to major safety deficiencies. The governments of countries with VVER reactors have invested millions of dollars toward improving the safety of their nuclear power plants. Most of these reactors will continue to operate for the foreseeable future since they provide urgently-needed electrical power. Given this situation, this paper assesses the radiological consequences of a major nuclear accident in Eastern Europe. The paper also chronicles the efforts launched by the international nuclear community to improve the safety of the reactors and notes the progress made so far through extensive collaborative efforts in Armenia, Bulgaria, the Czech Republic, Hungary, Kazakhstan, Lithuania, Russia, Slovakia, and Ukraine to reduce the risks of nuclear accidents. Western scientific and technical staff collaborated with these countries to improve the safety of their reactor operations by strengthening the ability of the regulator to perform its oversight function, installing safety equipment and technologies, investing time in safety training, and working diligently to establish an enduring safety culture. Still, continued safety improvement efforts are necessary to ensure safe operating practices and achieve timely phase-out of older plants.

29 CFR 1910.306 - Specific purpose equipment and installations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... and multicar installations. On single-car and multicar installations, equipment receiving electrical... ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Electrical Design Safety Standards for Electrical Systems § 1910.306 Specific purpose equipment and installations. (a) Electric signs and...

29 CFR 1910.306 - Specific purpose equipment and installations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... and multicar installations. On single-car and multicar installations, equipment receiving electrical... ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Electrical Design Safety Standards for Electrical Systems § 1910.306 Specific purpose equipment and installations. (a) Electric signs and...

29 CFR 1910.306 - Specific purpose equipment and installations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... and multicar installations. On single-car and multicar installations, equipment receiving electrical... ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Electrical Design Safety Standards for Electrical Systems § 1910.306 Specific purpose equipment and installations. (a) Electric signs and...

77 FR 40800 - Safety Zone: Sacramento River Closure for Aerial Cable Installation, Sacramento, CA

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-11

...-AA00 Safety Zone: Sacramento River Closure for Aerial Cable Installation, Sacramento, CA AGENCY: Coast... zone in the navigable waters of the Sacramento River near Sherman Island, CA in support of the...; Sacramento River Closure for Aerial Cable Installation, Sacramento, CA. (a) Location. This temporary safety...

How to evaluate the risks of work equipment and installations for health and safety? Research and activities of the German Committee for Plant Safety and consequences for regulation.

PubMed

Pieper, R

2012-01-01

Work equipment and installations with a high risk for health and safety of employees should be paid a special attention. The German Product Safety Act, which is aimed to manufacturers or distributors in order to protect consumers, maintains a conclusive catalogue of these so-called "installations in need of monitoring" fixing the work equipment and installations for which such special inspections can be demanded. This catalogue has remained unchanged for decades and has been transformed nearly unmodified into the Plant Safety Ordinance. Currently, there is a discussion about this catalogue in Germany. A major point of concern is the definition and the significance of "especially" dangerous work equipment and installations. Two recent research projects are dealing with the problem how to define "especially".

The impact of green stormwater infrastructure installation on surrounding health and safety

Treesearch

Michelle C. Kondo; Sarah C. Low; Jason Henning; Charles C. Branas

2015-01-01

We investigated the health and safety effects of urban green stormwater infrastructure (GSI) installments. We conducted a difference-in-differences analysis of the effects of GSI installments on health (e.g., blood pressure, cholesterol and stress levels) and safety (e.g., felonies, nuisance and property crimes, narcotics crimes) outcomes from 2000 to 2012 in...

Comparison of safety equipment between London underground and Beijing subway

NASA Astrophysics Data System (ADS)

Chen, T.; Zhang, S. Y.; Zhao, L. Z.; Xia, J. J.; Fu, X. C.; Bao, Z. M.; Chen, Y.; Zhang, X. Z.; Wang, R. J.; Hu, C.; Jing, L. S.; Wang, Y.

2017-06-01

The purpose of this paper was to improve the safety equipment’s effectiveness through the comparison. Firstly, the history and safety accident of London Underground and Beijing Subway were shown. Secondly, fire equipment between these two cities was compared including station’s hardware installations and carriage’s hardware installations. Thirdly, the relative software installations were also compared such as emergency drills. The results showed that Beijing Subway’s hardware installations were better than London. However, London Underground’s some installations were more effective than Beijing. Both cities would pay more attention on anti-terrorist in tunnel.

78 FR 17749 - Parts and Accessories Necessary for Safe Operation; Exemption Renewal for Greyhound Lines, Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-22

... placement of video event recorders at the top of the windshields on its buses. Greyhound may continue to use the video event recorders to increase safety through (1) Identification and remediation of risky... applied for an exemption from 49 CFR 393.60(e)(1) to allow it to install video event [[Page 17750...

29 CFR 1926.402 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

... installations used for the generation, transmission, and distribution of electric energy, including related...) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Electrical Installation Safety Requirements § 1926.402... electrical equipment and installations used to provide electric power and light at the jobsite. These...

29 CFR 1926.402 - Applicability.

Code of Federal Regulations, 2011 CFR

2011-07-01

... installations used for the generation, transmission, and distribution of electric energy, including related...) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Electrical Installation Safety Requirements § 1926.402... electrical equipment and installations used to provide electric power and light at the jobsite. These...

29 CFR 1926.402 - Applicability.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Electrical Installation Safety Requirements § 1926.402... electrical equipment and installations used to provide electric power and light at the jobsite. These... commenced. Note: If the electrical installation is made in accordance with the National Electrical Code ANSI...

Installation of child safety seats in selected 1988-1989 model year automobiles

DOT National Transportation Integrated Search

1989-06-01

The study tested whether currently marketed child safety seats are difficult to install in current model automobiles. The study also tested whether once installed, the child seats remain securely fastened when rocked or tilted. Thirteen toddler and f...

49 CFR 192.359 - Customer meter installations: Operating pressure.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Customer meter installations: Operating pressure... SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Customer Meters, Service Regulators, and Service Lines § 192.359 Customer meter installations: Operating pressure...

INSTALLATION OF A POST-ACCIDENT CONFINEMENT HIGH-LEVEL RADIATION MONITORING SYSTEM IN THE KOLA NUCLEAR POWER STATION (UNIT 2) IN RUSSIA

DOE Office of Scientific and Technical Information (OSTI.GOV)

GREENE,G.A.; GUPPY,J.G.

1998-09-01

This is the final report on the INSP project entitled, ``Post-Accident Confinement High-Level Radiation Monitoring System'' conducted by BNL under the authorization of Project Work Plan WBS 1.2.2.6 (Attachment 1). This project was initiated in February 1993 to assist the Russians in reducing risks associated with the continued operation of older Soviet-designed nuclear power plants, specifically the Kola VVER-440/230 Unit 2, through improved accident detection capability, specifically by the installation of a dual train high-level radiation detection system in the confinement of Unit 2 of the Kola NPP. The major technical objective of this project was to provide, install andmore » make operational the necessary hardware inside the confinement of the Kola NPP Unit 2 to provide early and reliable warning of the release of radionuclides from the reactor into the confinement air space as an indication of the occurrence of a severe accident at the plant. In addition, it was intended to provide hands-on experience and training to the Russian plant workers in the installation, operation, calibration and maintenance of the equipment in order that they may use the equipment without continued US assistance as an effective measure to improve reactor safety at the plant.« less

49 CFR 192.357 - Customer meters and regulators: Installation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Customer meters and regulators: Installation. 192... SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Customer Meters, Service Regulators, and Service Lines § 192.357 Customer meters and regulators: Installation. (a...

46 CFR 91.60-15 - Cargo Ship Safety Radio Certificate.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Cargo Ship Safety Radio Certificate. 91.60-15 Section 91..., 1974 § 91.60-15 Cargo Ship Safety Radio Certificate. Every vessel equipped with a radio installation on an international voyage must have a Cargo Ship Safety Radio Certificate. Each radio installation must...

46 CFR 31.40-15 - Cargo Ship Safety Radio Certificate-T/ALL.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Cargo Ship Safety Radio Certificate-T/ALL. 31.40-15... Safety Radio Certificate—T/ALL. Every tankship equipped with a radio installation on an international voyage must have a Cargo Ship Safety Radio Certificate. Each radio installation must meet the...

46 CFR 91.60-15 - Cargo Ship Safety Radio Certificate.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Cargo Ship Safety Radio Certificate. 91.60-15 Section 91..., 1974 § 91.60-15 Cargo Ship Safety Radio Certificate. Every vessel equipped with a radio installation on an international voyage must have a Cargo Ship Safety Radio Certificate. Each radio installation must...

46 CFR 189.60-15 - Cargo Ship Safety Radio Certificate.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Cargo Ship Safety Radio Certificate. 189.60-15 Section..., 1974 § 189.60-15 Cargo Ship Safety Radio Certificate. Every vessel equipped with a radio installation on an international voyage must have a Cargo Ship Safety Radio Certificate. Each radio installation...

46 CFR 91.60-15 - Cargo Ship Safety Radio Certificate.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Cargo Ship Safety Radio Certificate. 91.60-15 Section 91..., 1974 § 91.60-15 Cargo Ship Safety Radio Certificate. Every vessel equipped with a radio installation on an international voyage must have a Cargo Ship Safety Radio Certificate. Each radio installation must...

46 CFR 189.60-15 - Cargo Ship Safety Radio Certificate.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Cargo Ship Safety Radio Certificate. 189.60-15 Section..., 1974 § 189.60-15 Cargo Ship Safety Radio Certificate. Every vessel equipped with a radio installation on an international voyage must have a Cargo Ship Safety Radio Certificate. Each radio installation...

46 CFR 91.60-15 - Cargo Ship Safety Radio Certificate.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 4 2013-10-01 2013-10-01 false Cargo Ship Safety Radio Certificate. 91.60-15 Section 91..., 1974 § 91.60-15 Cargo Ship Safety Radio Certificate. Every vessel equipped with a radio installation on an international voyage must have a Cargo Ship Safety Radio Certificate. Each radio installation must...

46 CFR 189.60-15 - Cargo Ship Safety Radio Certificate.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Cargo Ship Safety Radio Certificate. 189.60-15 Section..., 1974 § 189.60-15 Cargo Ship Safety Radio Certificate. Every vessel equipped with a radio installation on an international voyage must have a Cargo Ship Safety Radio Certificate. Each radio installation...

46 CFR 91.60-15 - Cargo Ship Safety Radio Certificate.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Cargo Ship Safety Radio Certificate. 91.60-15 Section 91..., 1974 § 91.60-15 Cargo Ship Safety Radio Certificate. Every vessel equipped with a radio installation on an international voyage must have a Cargo Ship Safety Radio Certificate. Each radio installation must...

46 CFR 189.60-15 - Cargo Ship Safety Radio Certificate.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Cargo Ship Safety Radio Certificate. 189.60-15 Section..., 1974 § 189.60-15 Cargo Ship Safety Radio Certificate. Every vessel equipped with a radio installation on an international voyage must have a Cargo Ship Safety Radio Certificate. Each radio installation...

Continuously improving safety of nuclear installations: An approach to be reinforced after the Fukushima accident

NASA Astrophysics Data System (ADS)

Repussard, Jacques; Schwarz, Michel

2012-05-01

After the Three Mile Island accident in 1979 and the Chernobyl accident in 1986, the Fukushima accident shows that the probability of a core meltdown accident in an LWR (Light Water Reactor) has been largely underestimated. The consequences of such an accident are unacceptable: except in the case of TMI2 (Three Mile Island 2) large areas around the damaged plants are contaminated for decades and populations have to be relocated for long periods. This article presents the French approach which consists in improving continuously the safety of the Nuclear Power Plants (NPP) on the basis of lessons learned from operating experience and from the progress in R&D (Research and Development). It details the key role played by IRSN (Institut de radioprotection et de sûreté nucléaire), the French TSO (Technical and scientific Safety Organization), and shows how the Fukushima accident contributes to this approach in improving NPP robustness. It concludes on the necessity to keep on networking TSOs, to share knowledge as well as R&D resources, with the ultimate goal of enhancing and harmonizing nuclear safety worldwide.

Work-related injuries among union drywall carpenters in Washington State, 1989-2008.

PubMed

Schoenfisch, Ashley L; Lipscomb, Hester; Marshall, Steve; Cameron, Wilfred; Richardson, David; Casteel, Carri

2013-10-01

Drywall installers are at high-risk of work-related injury. Comprehensive descriptive epidemiology of injuries among drywall installers, particularly over time, is lacking. We identified worker-hours and reported and accepted workers' compensation (WC) claims for a 20-year (1989-2008) cohort of 24,830 Washington State union carpenters. Stratified by predominant type of work (drywall installation, other carpentry), work-related injury rates were examined over calendar time and by worker characteristics. Expert interviews provided contextual details. Drywall installers' injury rates, higher than those of other carpenters, declined substantially over this period by 73.6%. Common injury mechanisms were struck by/against, overexertion and falls. Drywall material was considered a contributing factor in 19.7% of injuries. One-third of these drywall material-related injuries resulted in paid lost time, compared to 19.4% of injuries from other sources. Rates of injury were particularly high among workers with 2 to <4 years in the union. Notable declines over time in rates of overexertion injury in which drywall material was a contributing factor were still observed after controlling for secular temporal trends. Experts highlighted changes over the past 20 years that improved both work safety and, in some cases, production. Declines in drywall installers' injury rates over time likely reflect, in part, enhanced workplace safety, including efforts to reduce overexertion hazards associated with handling drywall. Continued injury prevention efforts are needed, particularly for less tenured workers. Given the potential for under-reporting to WC, additional sources of health outcomes data may provide a more complete picture of workers' health. Copyright © 2013 Wiley Periodicals, Inc.

30 CFR 57.4504 - Fan installations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Fan installations. 57.4504 Section 57.4504 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Fire Prevention and...

30 CFR 57.4131 - Surface fan installations and mine openings.

Code of Federal Regulations, 2010 CFR

2010-07-01

....4131 Section 57.4131 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Fire Prevention and Control Prohibitions/precautions/housekeeping § 57.4131 Surface fan installations...

24 CFR 232.515 - Refund of fees.

Code of Federal Regulations, 2014 CFR

2014-04-01

... FACILITIES Eligibility Requirements-Supplemental Loans To Finance Purchase and Installation of Fire Safety... that the installation of fire safety equipment for the project has been prevented because of...

24 CFR 232.515 - Refund of fees.

Code of Federal Regulations, 2013 CFR

2013-04-01

... FACILITIES Eligibility Requirements-Supplemental Loans To Finance Purchase and Installation of Fire Safety... that the installation of fire safety equipment for the project has been prevented because of...

24 CFR 232.515 - Refund of fees.

Code of Federal Regulations, 2012 CFR

2012-04-01

... FACILITIES Eligibility Requirements-Supplemental Loans To Finance Purchase and Installation of Fire Safety... that the installation of fire safety equipment for the project has been prevented because of...

30 CFR 56.12050 - Installation of trolley wires.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Installation of trolley wires. 56.12050 Section 56.12050 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Electricity...

30 CFR 56.12050 - Installation of trolley wires.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Installation of trolley wires. 56.12050 Section 56.12050 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Electricity...

30 CFR 56.12040 - Installation of operating controls.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Installation of operating controls. 56.12040 Section 56.12040 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Electricity...

30 CFR 56.12040 - Installation of operating controls.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Installation of operating controls. 56.12040 Section 56.12040 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Electricity...

30 CFR 56.12040 - Installation of operating controls.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Installation of operating controls. 56.12040 Section 56.12040 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Electricity...

30 CFR 56.12050 - Installation of trolley wires.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Installation of trolley wires. 56.12050 Section 56.12050 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Electricity...

30 CFR 56.12040 - Installation of operating controls.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Installation of operating controls. 56.12040 Section 56.12040 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Electricity...

30 CFR 56.12040 - Installation of operating controls.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Installation of operating controls. 56.12040 Section 56.12040 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Electricity...

30 CFR 56.12050 - Installation of trolley wires.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Installation of trolley wires. 56.12050 Section 56.12050 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Electricity...

30 CFR 56.12050 - Installation of trolley wires.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Installation of trolley wires. 56.12050 Section 56.12050 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Electricity...

24 CFR 232.620 - Determination of compliance by HHS.

Code of Federal Regulations, 2013 CFR

2013-04-01

... of Fire Safety Equipment Special Requirements § 232.620 Determination of compliance by HHS. An... the fire safety equipment has been installed, will be in compliance with the HHS requirements for fire... Security Act upon the installation of the fire safety equipment. The architectural exhibits, as approved...

30 CFR 77.511 - Danger signs at electrical installations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Danger signs at electrical installations. 77.511 Section 77.511 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF...

Safety evaluation of installing center two-way left-turn lanes on two-lane roads

DOT National Transportation Integrated Search

2008-03-01

The Federal Highway Administration organized a Pooled Fund Study of 26 States to evaluate low-cost safety strategies as part of its strategic highway safety effort. One of the strategies chosen to be evaluated for this study was the installation of c...

Chemical plant innovative safety investments decision-support methodology.

PubMed

Reniers, G L L; Audenaert, A

2009-01-01

This article examines the extent to which investing in safety during the creation of a new chemical installation proves profitable. The authors propose a management supporting cost-benefit model that identifies and evaluates investments in safety within a chemical company. This innovative model differentiates between serious accidents and less serious accidents, thus providing an authentic image of prevention-related costs and benefits. In classic cost-benefit analyses, which do not make such differentiations, only a rudimentary image of potential profitability resulting from investments in safety is obtained. The resulting management conclusions that can be drawn from such classical analyses are of a very limited nature. The proposed model, however, is applied to a real case study and the proposed investments in safety at an appointed chemical installation are weighed against the estimated hypothetical benefits resulting from the preventive measures to be installed at the installation. In the case-study carried out in question, it would appear that the proposed prevention investments are justified. Such an economic exercise may be very important to chemical corporations trying to (further) improve their safety investments.

Proposed system safety design and test requirements for the microlaser ordnance system

NASA Technical Reports Server (NTRS)

Stoltz, Barb A.; Waldo, Dale F.

1993-01-01

Safety for pyrotechnic ignition systems is becoming a major concern for the military. In the past twenty years, stray electromagnetic fields have steadily increased during peacetime training missions and have dramatically increased during battlefield missions. Almost all of the ordnance systems in use today depend on an electrical bridgewire for ignition. Unfortunately, the bridgewire is the cause of the majority of failure modes. The common failure modes include the following: broken bridgewires; transient RF power, which induces bridgewire heating; and cold temperatures, which contracts the explosive mix away from the bridgewire. Finding solutions for these failure modes is driving the costs of pyrotechnic systems up. For example, analyses are performed to verify that the system in the environment will not see more energy than 20 dB below the 'No-fire' level. Range surveys are performed to determine the operational, storage, and transportation RF environments. Cryogenic tests are performed to verify the bridgewire to mix interface. System requirements call for 'last minute installation,' 'continuity checks after installation,' and rotating safety devices to 'interrupt the explosive train.' As an alternative, MDESC has developed a new approach based upon our enabling laser diode technology. We believe that Microlaser initiated ordnance offers a unique solution to the bridgewire safety concerns. For this presentation, we will address, from a system safety viewpoint, the safety design and the test requirements for a Microlaser ordnance system. We will also review how this system could be compliant to MIL-STD-1576 and DOD-83578A and the additional necessary requirements.

40 CFR 60.2939 - What continuous emission monitoring systems must I install?

Code of Federal Regulations, 2010 CFR

2010-07-01

... and Qualification Monitoring § 60.2939 What continuous emission monitoring systems must I install? (a) You must install, calibrate, maintain, and operate continuous emission monitoring systems for carbon... carbon monoxide. (b) You must install, evaluate, and operate each continuous emission monitoring system...

40 CFR 60.2939 - What continuous emission monitoring systems must I install?

Code of Federal Regulations, 2011 CFR

2011-07-01

... and Qualification Monitoring § 60.2939 What continuous emission monitoring systems must I install? (a) You must install, calibrate, maintain, and operate continuous emission monitoring systems for carbon... carbon monoxide. (b) You must install, evaluate, and operate each continuous emission monitoring system...

Child passenger safety.

PubMed

Durbin, Dennis R

2011-04-01

Despite significant reductions in the number of children killed in motor vehicle crashes over the past decade, crashes continue to be the leading cause of death for children 4 years and older. Therefore, the American Academy of Pediatrics continues to recommend inclusion of child passenger safety anticipatory guidance at every health-supervision visit. This technical report provides a summary of the evidence in support of 5 recommendations for best practices to optimize safety in passenger vehicles for children from birth through adolescence that all pediatricians should know and promote in their routine practice. These recommendations are presented in the revised policy statement on child passenger safety in the form of an algorithm that is intended to facilitate their implementation by pediatricians with their patients and families. The algorithm is designed to cover the majority of situations that pediatricians will encounter in practice. In addition, a summary of evidence on a number of additional issues that affect the safety of children in motor vehicles, including the proper use and installation of child restraints, exposure to air bags, travel in pickup trucks, children left in or around vehicles, and the importance of restraint laws, is provided. Finally, this technical report provides pediatricians with a number of resources for additional information to use when providing anticipatory guidance to families.

16 CFR Appendix I to Part 1402 - Recommended Outline for Instruction Booklet on “How To Safely Install Your CB Base Station Antenna”

Code of Federal Regulations, 2010 CFR

2010-01-01

... on âHow To Safely Install Your CB Base Station Antennaâ I Appendix I to Part 1402 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CB BASE STATION... Outline for Instruction Booklet on “How To Safely Install Your CB Base Station Antenna” I. Required...

Preventive medicine oversight of splash pads on military installations.

PubMed

Hardcastle, Lisa Raysby; Perry, Matthew; Browne, Ashley

2015-01-01

Over the past several years, an increasing number of military installations have installed splash pads that provide fun, recreational water entertainment for Soldiers and their families. The addition of splash pads brings added responsibilities for medical treatment facility preventive medicine oversight and installation facilities maintenance to ensure a safe and healthy environment. Currently, there are no consistent standards or detailed guidance for military installations to follow when installing and maintaining splash pads. The central issues associated with splash pads on military installations are water quality and risk for waterborne illnesses, responsibility for safety and health oversight, and federal energy and water sustainability mandates. This article examines the importance of implementing a standard for design and oversight to ensure the health and safety of Soldiers and their families.

24 CFR 232.515 - Refund of fees.

Code of Federal Regulations, 2011 CFR

2011-04-01

... INSURANCE FOR NURSING HOMES, INTERMEDIATE CARE FACILITIES, BOARD AND CARE HOMES, AND ASSISTED LIVING FACILITIES Eligibility Requirements-Supplemental Loans To Finance Purchase and Installation of Fire Safety... that the installation of fire safety equipment for the project has been prevented because of...

Car Safety Seat Usage and Selection Among Families Attending University Hospital Limerick.

PubMed

Scully, P; Finner, N; Letshwiti, J B; O'Gorman, C

2016-05-10

The safest way for children to travel within a car is by provision of a weight-appropriate safety-seat. To investigate this, we conducted a cross-sectional study of adult parents who had children under 12 years, and collected information related to: car use, safety-seat legislation, and type of safety-seat employed. Data were reviewed on 120 children from 60 respondents. Ninety-eight (81.7%) children were transported daily by car. Forty-eight (81.4%) respondents were aware that current safety-seat legislation is based on the weight of the child. One hundred and seven (89.9%) children were restrained during travel using a car safety-seat. One hundred and two (96.2%) safety seats were newly purchased, installed in 82.3% (88) cases by family members with installation instructions fully read in 58 (55.2%) cases. Ninety-nine (83.2%) children were restrained using an appropriate safety-seat for their weight. The results show that four out of five families are employing the most appropriate safety-seat for their child, so providing an effective mechanism to reduce car-related injury. However, the majority of safety-seats are installed by family members, which may have child safety consequences.

29 CFR 1910.308 - Special systems.

Code of Federal Regulations, 2012 CFR

2012-07-01

... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Electrical Design Safety Standards for Electrical Systems § 1910.308... conductors shall be installed in rigid metal conduit, in intermediate metal conduit, in electrical metallic... are installed in an identified common mounting with electrical connections that will divide the...

29 CFR 1910.308 - Special systems.

Code of Federal Regulations, 2013 CFR

2013-07-01

... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Electrical Design Safety Standards for Electrical Systems § 1910.308... conductors shall be installed in rigid metal conduit, in intermediate metal conduit, in electrical metallic... are installed in an identified common mounting with electrical connections that will divide the...

29 CFR 1910.308 - Special systems.

Code of Federal Regulations, 2014 CFR

2014-07-01

... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Electrical Design Safety Standards for Electrical Systems § 1910.308... conductors shall be installed in rigid metal conduit, in intermediate metal conduit, in electrical metallic... are installed in an identified common mounting with electrical connections that will divide the...

16 CFR 1404.2 - Background.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CELLULOSE INSULATION... can occur where cellulose insulation is improperly installed too close to the sides or over the top of recessed electrical light fixtures, or installed too close to the exhaust flues from heat producing devices...

16 CFR 1404.2 - Background.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CELLULOSE INSULATION... can occur where cellulose insulation is improperly installed too close to the sides or over the top of recessed electrical light fixtures, or installed too close to the exhaust flues from heat producing devices...

16 CFR 1404.2 - Background.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CELLULOSE INSULATION... can occur where cellulose insulation is improperly installed too close to the sides or over the top of recessed electrical light fixtures, or installed too close to the exhaust flues from heat producing devices...

16 CFR 1404.2 - Background.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS CELLULOSE INSULATION... can occur where cellulose insulation is improperly installed too close to the sides or over the top of recessed electrical light fixtures, or installed too close to the exhaust flues from heat producing devices...

29 CFR 1910.308 - Special systems.

Code of Federal Regulations, 2011 CFR

2011-07-01

... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Electrical Design Safety Standards for Electrical Systems § 1910.308... conductors shall be installed in rigid metal conduit, in intermediate metal conduit, in electrical metallic... are installed in an identified common mounting with electrical connections that will divide the...

29 CFR 1910.308 - Special systems.

Code of Federal Regulations, 2010 CFR

2010-07-01

... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Electrical Design Safety Standards for Electrical Systems § 1910.308... conductors shall be installed in rigid metal conduit, in intermediate metal conduit, in electrical metallic... are installed in an identified common mounting with electrical connections that will divide the...

U. K. pressing campaign to improve offshore safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Knott, D.

1994-02-14

The U.K. government is making progress in its campaign to improve the safety of personnel working offshore. The government's Health and Safety Executive (HSE) plans to assess and pass judgment on at lease one safety plan, called a safety case, from each U.K. North Sea operator as soon as possible. HSE has agreed with the industry on a list of 61 priority safety cases, known as exemplars. Feedback from exemplar assessment will help operators review safety management and assist in preparation or revision of future safety cases. It also will give HSE practice in assessing a range of case types.more » The requirement for a safety program is part of new U.K. offshore legislation designed to prevent another accident similar to the Piper Alpha platform fire and explosion of 1988. After the transition period it will be against the law to operate an oil and gas installation in British waters without an accepted safety case. Besides existing installations, safety cases are also required for new installations reaching design stage by May 31, 1993, the date safety case regulations went into force. The paper describes the Cullen report, companies' experiences with the new law, and the safety assessment progress so far.« less

30 CFR 56.9307 - Design, installation, and maintenance of railroads.

Code of Federal Regulations, 2010 CFR

2010-07-01

... railroads. 56.9307 Section 56.9307 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF... MINES Loading, Hauling, and Dumping Safety Devices, Provisions, and Procedures for Roadways, Railroads, and Loading and Dumping Sites § 56.9307 Design, installation, and maintenance of railroads. Roadbeds...

24 CFR 232.630 - Assurance of completion.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Fire Safety Equipment Special Requirements § 232.630 Assurance of completion. If the property upon which the fire safety equipment is to be installed is subject to a mortgage insured or held by the... the contract for installation as he may from time to time prescribe. ...

24 CFR 232.630 - Assurance of completion.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Fire Safety Equipment Special Requirements § 232.630 Assurance of completion. If the property upon which the fire safety equipment is to be installed is subject to a mortgage insured or held by the... the contract for installation as he may from time to time prescribe. ...

24 CFR 232.630 - Assurance of completion.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Fire Safety Equipment Special Requirements § 232.630 Assurance of completion. If the property upon which the fire safety equipment is to be installed is subject to a mortgage insured or held by the... the contract for installation as he may from time to time prescribe. ...

40 CFR 60.2939 - What continuous emission monitoring systems must I install?

Code of Federal Regulations, 2012 CFR

2012-07-01

... systems must I install? 60.2939 Section 60.2939 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... and Qualification Monitoring § 60.2939 What continuous emission monitoring systems must I install? (a) You must install, calibrate, maintain, and operate continuous emission monitoring systems for carbon...

Investment in workforce health: exploring the implications for workforce safety climate and commitment.

PubMed

Mearns, Kathryn; Hope, Lorraine; Ford, Michael T; Tetrick, Lois E

2010-09-01

The relationship between investment in employee health and non-health outcomes has received little research attention. Drawing from social exchange and climate theory, the current study uses a multilevel approach to examine the implications of worksite health investment for worksite safety and health climate and employee safety compliance and commitment to the worksite. Data were collected from 1932 personnel working on 31 offshore installations operating in UK waters. Installation medics provided corporate workforce health investment details for 20 of these installations. The findings provide support for a strong link between health investment practices and worksite safety and health climate. The results also found a relationship between health investment practices and organizational commitment among employees. These results suggest that health investment practices are associated with committed workforces and climates that reflect a priority on health and safety. 2009 Elsevier Ltd. All rights reserved.

Development of Accelerated Fuel-Engines Qualification Procedures Methodology. Volume II. Appendices.

DTIC Science & Technology

1981-12-01

temperature test and the spot calibration, remove the clay filter. Reset the maximum fuel temperature safety device for 1900F. Continue cycling per Figure...34 -t " ;" " pum p . 1...0.,. Fuel ’ ’ ’ :’: ? Secondary ; Filter (S) -, A TVented Cap Removable Screen\\ - Tank Fu e.l ExpansSon DtVrent Pipe A n...practice, improper installation or adjustment of components *Do not remove or inspect secondary fuel filter. One of the initial production engines is

40 CFR 60.2939 - What continuous emission monitoring systems must I install?

Code of Federal Regulations, 2013 CFR

2013-07-01

... systems must I install? 60.2939 Section 60.2939 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... § 60.2939 What continuous emission monitoring systems must I install? (a) You must install, calibrate, maintain, and operate continuous emission monitoring systems for carbon monoxide and for oxygen. You must...

40 CFR 60.2939 - What continuous emission monitoring systems must I install?

Code of Federal Regulations, 2014 CFR

2014-07-01

... systems must I install? 60.2939 Section 60.2939 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... § 60.2939 What continuous emission monitoring systems must I install? (a) You must install, calibrate, maintain, and operate continuous emission monitoring systems for carbon monoxide and for oxygen. You must...

Consequences and countermeasures in a nuclear power accident: Chernobyl experience.

PubMed

Kirichenko, Vladimir A; Kirichenko, Alexander V; Werts, Day E

2012-09-01

Despite the tragic accidents in Fukushima and Chernobyl, the nuclear power industry will continue to contribute to the production of electric energy worldwide until there are efficient and sustainable alternative sources of energy. The Chernobyl nuclear accident, which occurred 26 years ago in the former Soviet Union, released an immense amount of radioactivity over vast territories of Belarus, Ukraine, and the Russian Federation, extending into northern Europe, and became the most severe accident in the history of the nuclear industry. This disaster was a result of numerous factors including inadequate nuclear power plant design, human errors, and violation of safety measures. The lessons learned from nuclear accidents will continue to strengthen the safety design of new reactor installations, but with more than 400 active nuclear power stations worldwide and 104 reactors in the Unites States, it is essential to reassess fundamental issues related to the Chernobyl experience as it continues to evolve. This article summarizes early and late events of the incident, the impact on thyroid health, and attempts to reduce agricultural radioactive contamination.

Test plan and report for Space Shuttle launch environment testing of Bergen cable technology safety cable

NASA Technical Reports Server (NTRS)

Ralph, John

1992-01-01

Bergen Cable Technology (BCT) has introduced a new product they refer to as 'safety cable'. This product is intended as a replacement for lockwire when installed per Aerospace Standard (AS) 4536 (included in Appendix D of this document). Installation of safety cable is reportedly faster and more uniform than lockwire. NASA/GSFC proposes to use this safety cable in Shuttle Small Payloads Project (SSPP) applications on upcoming Shuttle missions. To assure that BCT safety cable will provide positive locking of fasteners equivalent to lockwire, the SSPP will conduct vibration and pull tests of the safety cable.

24 CFR 3285.103 - Site suitability with design zone maps.

Code of Federal Regulations, 2010 CFR

2010-04-01

... HOUSING AND URBAN DEVELOPMENT MODEL MANUFACTURED HOME INSTALLATION STANDARDS Pre-Installation....305(c)(2) of the Manufactured Home Construction and Safety Standards in this chapter. (b) Roof load... § 3280.305(c)(3) of the Manufactured Home Construction and Safety Standards in this chapter. Refer to...

24 CFR 3285.103 - Site suitability with design zone maps.

Code of Federal Regulations, 2012 CFR

2012-04-01

... HOUSING AND URBAN DEVELOPMENT MODEL MANUFACTURED HOME INSTALLATION STANDARDS Pre-Installation....305(c)(2) of the Manufactured Home Construction and Safety Standards in this chapter. (b) Roof load... § 3280.305(c)(3) of the Manufactured Home Construction and Safety Standards in this chapter. Refer to...

24 CFR 3285.103 - Site suitability with design zone maps.

Code of Federal Regulations, 2011 CFR

2011-04-01

... HOUSING AND URBAN DEVELOPMENT MODEL MANUFACTURED HOME INSTALLATION STANDARDS Pre-Installation....305(c)(2) of the Manufactured Home Construction and Safety Standards in this chapter. (b) Roof load... § 3280.305(c)(3) of the Manufactured Home Construction and Safety Standards in this chapter. Refer to...

14 CFR 23.2 - Special retroactive requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... airplane for entry into the United States must provide a safety belt and shoulder harness for each forward- or aft-facing seat which will protect the occupant from serious head injury when subjected to the... safety belt and shoulder harness installed. (b) Each shoulder harness installed at a flight crewmember...

14 CFR 23.2 - Special retroactive requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... airplane for entry into the United States must provide a safety belt and shoulder harness for each forward- or aft-facing seat which will protect the occupant from serious head injury when subjected to the... safety belt and shoulder harness installed. (b) Each shoulder harness installed at a flight crewmember...

14 CFR 23.2 - Special retroactive requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... airplane for entry into the United States must provide a safety belt and shoulder harness for each forward- or aft-facing seat which will protect the occupant from serious head injury when subjected to the... safety belt and shoulder harness installed. (b) Each shoulder harness installed at a flight crewmember...

14 CFR 23.2 - Special retroactive requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... airplane for entry into the United States must provide a safety belt and shoulder harness for each forward- or aft-facing seat which will protect the occupant from serious head injury when subjected to the... safety belt and shoulder harness installed. (b) Each shoulder harness installed at a flight crewmember...

14 CFR 23.2 - Special retroactive requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... airplane for entry into the United States must provide a safety belt and shoulder harness for each forward- or aft-facing seat which will protect the occupant from serious head injury when subjected to the... safety belt and shoulder harness installed. (b) Each shoulder harness installed at a flight crewmember...

76 FR 15798 - Special Conditions: Boeing 747-468, Installation of a Medical Lift

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-22

... a novel or unusual design feature associated with the installation of a medical lift. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These... airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. Type...

Flat-plate solar collector - installation package

NASA Technical Reports Server (NTRS)

1978-01-01

Package includes installation, operation and maintenance manual for collector, analysis of safety hazards, special handling instructions, materials list, installation drawings, and warranty and certification statement. Manual includes instructions for roof preparation and for preparing collector for installation. Several pages are devoted to major and minor repairs.

30 CFR 77.211-1 - Continuous methane monitoring device; installation and operation; automatic deenergization of...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Continuous methane monitoring device... Installations § 77.211-1 Continuous methane monitoring device; installation and operation; automatic deenergization of electric equipment. Continuous methane monitoring devices shall be set to deenergize...

30 CFR 77.211-1 - Continuous methane monitoring device; installation and operation; automatic deenergization of...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Continuous methane monitoring device... Installations § 77.211-1 Continuous methane monitoring device; installation and operation; automatic deenergization of electric equipment. Continuous methane monitoring devices shall be set to deenergize...

Working toward the elimination of residential fire deaths: the Centers for Disease Control and Prevention's Smoke Alarm Installation and Fire Safety Education (SAIFE) program.

PubMed

Ballesteros, Michael F; Jackson, Mark L; Martin, Maurice W

2005-01-01

To address residential fires and related injuries, the Centers for Disease Control and Prevention funds state health departments to deliver a Smoke Alarm Installation and Fire Safety Education (SAIFE) program in high-risk homes in 16 states. This program involves recruiting local communities and community partners, hiring a local coordinator, canvassing neighborhood homes, installing long-lasting lithium-powered smoke alarms, and providing general fire safety education and 6-month follow-up to determine alarm functionality. Local fire departments are vital community partners in delivering this program. Since the program's inception, more than 212,000 smoke alarms have been installed in more than 126,000 high-risk homes. Additionally, approximately 610 lives have potentially been saved as a result of a program alarm that provided early warning to a dangerous fire incident.

78 FR 54417 - Oil and Gas and Sulphur Operations on the Outer Continental Shelf-Oil and Gas Production Safety...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-04

... for subsurface related equipment installed in high safety valves (SSSVs) and pressure high temperature (HPHT) related equipment installed in environments. high pressure high temperature (HPHT) environments... flammable liquids (other than produced hydrocarbons) stored on the facility in containers other than bulk...

30 CFR 71.500 - Sanitary toilet facilities at surface work sites; installation requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Sanitary toilet facilities at surface work sites; installation requirements. 71.500 Section 71.500 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY HEALTH STANDARDS-SURFACE COAL MINES AND...

The implementation of physical safety system in bunker of the electron beam accelerator

NASA Astrophysics Data System (ADS)

Ahmad, M. A.; Hashim, S. A.; Ahmad, A.; Leo, K. W.; Chulan, R. M.; Dalim, Y.; Baijan, A. H.; Zain, M. F.; Ros, R. C.

2017-01-01

This paper describes the implementation of physical safety system for the new low energy electron beam (EB) accelerator installed at Block 43T Nuclear Malaysia. The low energy EB is a locally designed and developed with a target energy of 300 keV. The issues on radiation protection have been addressed by the installation of radiation shielding in the form of a bunker and installation radiation monitors. Additional precaution is needed to ensure that personnel are not exposed to radiation and other physical hazards. Unintentional access to the radiation room can cause serious hazard and hence safety features must be installed to prevent such events. In this work we design and built a control and monitoring system for the shielding door. The system provides signals to the EB control panel to allow or prevent operation. The design includes limit switches, key-activated switches and emergency stop button and surveillance camera. Entry procedure is also developed as written record and for information purposes. As a result, through this safety implementation human error will be prevented, increase alertness during operation and minimizing unnecessary radiation exposure.

Use of top tethers with forward-facing child restraints: observations and driver interviews.

PubMed

Eichelberger, Angela H; Decina, Lawrence E; Jermakian, Jessica S; McCartt, Anne T

2014-02-01

Despite the safety benefits, many parents do not use top tethers with forward-facing child restraints. Detailed information was collected about why parents are not using tethers. The sample included 479 drivers who had forward-facing child restraints installed in passenger vehicles equipped with tether anchors. The survey was conducted primarily at shopping centers, recreation facilities, child care facilities, car seat check events, and health care facilities in mostly suburban areas surrounding Philadelphia, Washington, DC, Fredericksburg (VA), and Seattle. Drivers were surveyed about their knowledge and use of tethers and experience with child restraints. Tether use was observed to verify whether tethers were being used correctly. Fifty-six percent of forward-facing child restraints were installed with the tether; 39% were installed with the tether used correctly. The tether was used with 71% of LATCH lower anchor installations and 33% of seat belt installations. Drivers who installed child restraints without tethers most often said they did not know about the tether or how to use it. Although the tether use rate was slightly higher in the current research than in previous studies, many parents and caregivers still use forward-facing child restraints without attaching the tether. Because the main problem is lack of awareness of the tether or how to use it, public education should focus specifically on the safety benefits of tethers and how to use them. Information about why caregivers fail to use top tethers is potentially useful to child restraint manufacturers, child passenger safety technicians, and others who work with parents to improve motor vehicle safety. Copyright © 2013 Elsevier Ltd and National Safety Council. All rights reserved.

30 CFR 77.201 - Methane content in surface installations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Methane content in surface installations. 77.201 Section 77.201 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL... UNDERGROUND COAL MINES Surface Installations § 77.201 Methane content in surface installations. The methane...

30 CFR 57.12050 - Installation of trolley wires.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Installation of trolley wires. 57.12050 Section 57.12050 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Electricity Surface and Underground § 57.12050 Installation of trolley wires. Trolley wires shall be installed...

30 CFR 57.12050 - Installation of trolley wires.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Installation of trolley wires. 57.12050 Section 57.12050 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Electricity Surface and Underground § 57.12050 Installation of trolley wires. Trolley wires shall be installed...

30 CFR 77.201 - Methane content in surface installations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Methane content in surface installations. 77.201 Section 77.201 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL... UNDERGROUND COAL MINES Surface Installations § 77.201 Methane content in surface installations. The methane...

49 CFR 571.404 - Standard No. 404; Platform lift installations in motor vehicles.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 6 2010-10-01 2010-10-01 false Standard No. 404; Platform lift installations in... VEHICLE SAFETY STANDARDS Federal Motor Vehicle Safety Standards § 571.404 Standard No. 404; Platform lift... platform lifts used to assist persons with limited mobility in entering or leaving a vehicle. S2. Purpose...

49 CFR 571.404 - Standard No. 404; Platform lift installations in motor vehicles.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 6 2011-10-01 2011-10-01 false Standard No. 404; Platform lift installations in... VEHICLE SAFETY STANDARDS Federal Motor Vehicle Safety Standards § 571.404 Standard No. 404; Platform lift... platform lifts used to assist persons with limited mobility in entering or leaving a vehicle. S2. Purpose...

Behavioral Skills Training to Improve Installation and Use of Child Passenger Safety Restraints

ERIC Educational Resources Information Center

Himle, Michael B.; Wright, Kalon A.

2014-01-01

The risk for serious injury and death to children during motor vehicle accidents can be greatly reduced through the correct use of child passenger safety restraints (CPSRs). Unfortunately, most CPSRs are installed or used incorrectly. This study examined the effectiveness of behavioral skills training (BST) to teach 10 participants to install…

40 CFR 60.3038 - What continuous emission monitoring systems must I install?

Code of Federal Regulations, 2011 CFR

2011-07-01

... December 9, 2004 Model Rule-Monitoring § 60.3038 What continuous emission monitoring systems must I install? (a) You must install, calibrate, maintain, and operate continuous emission monitoring systems for... system according to the “Monitoring Requirements” in § 60.13. ...

40 CFR 60.3038 - What continuous emission monitoring systems must I install?

Code of Federal Regulations, 2010 CFR

2010-07-01

... December 9, 2004 Model Rule-Monitoring § 60.3038 What continuous emission monitoring systems must I install? (a) You must install, calibrate, maintain, and operate continuous emission monitoring systems for... system according to the “Monitoring Requirements” in § 60.13. ...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dillon, C.

Over the past few years, numerous Accreditation Bodies, Regulatory Agencies, and State Regulations have implemented requirements for Radiation Safety Surveys following installation or modification to x-ray rooms. The objective of this session is to review best practices in performing radiation safety surveys for both Therapy and Diagnostic installations, as well as a review of appropriate survey instruments. This session will be appropriate for both therapy and imaging physicists who are looking to increase their working knowledge of radiation safety surveys. Learning Objectives: Identify Appropriate Survey Meters for Radiation Safety Surveys Develop best practices for Radiation Safety Surveys for Therapy unitsmore » that include common areas of concern. Develop best practices for Radiation Safety Surveys of Diagnostic and Nuclear Medicine rooms. Identify acceptable dose levels and the factors that affect the calculations associated with performing Radiation Safety Surveys.« less

30 CFR 250.807 - Additional requirements for subsurface safety valves and related equipment installed in high...

Code of Federal Regulations, 2014 CFR

2014-07-01

... valves and related equipment installed in high pressure high temperature (HPHT) environments. 250.807... INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Production... installed in high pressure high temperature (HPHT) environments. (a) If you plan to install SSSVs and...

30 CFR 250.807 - Additional requirements for subsurface safety valves and related equipment installed in high...

Code of Federal Regulations, 2012 CFR

2012-07-01

... valves and related equipment installed in high pressure high temperature (HPHT) environments. 250.807... INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Production... installed in high pressure high temperature (HPHT) environments. (a) If you plan to install SSSVs and...

30 CFR 250.807 - Additional requirements for subsurface safety valves and related equipment installed in high...

Code of Federal Regulations, 2013 CFR

2013-07-01

... valves and related equipment installed in high pressure high temperature (HPHT) environments. 250.807... INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Production... installed in high pressure high temperature (HPHT) environments. (a) If you plan to install SSSVs and...

75 FR 65151 - Marine Vapor Control Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-21

...The Coast Guard proposes to increase maritime domain safety by revising existing safety regulations for facility and vessel vapor control systems (VCSs). The proposed changes would make VCS requirements more compatible with new Federal and State environmental requirements, reflect industry advancements in VCS technology, and codify the standards for the design and operation of a VCS at tank barge cleaning facilities. These changes would increase the safety of operations by regulating the design, installation, and use of VCSs, but would not require anyone to install or use VCSs.

Deadlines set for new U. K. offshore safety rules

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-12-14

This paper reports on new U.K. offshore safety regulations-inspired by Lord Cullen's 1990 report spawned by the 1987 Piper Alpha platform accident which will take effect May 31, 1993, for new installations. The U.K. Health and Safety Executive (HSE) said its proposed regulations, required for operators or owners to gain HSE approval for each fixed or mobile installation, was put before Parliament Nov. 27. That gives opposition parties 40 days to call for debate and possible amendment before the proposals become law.

A comparison of safety benefits of pedestrian countdown signals with and without pushbuttons in Michigan.

PubMed

Boateng, Richard Atta; Kwigizile, Valerian; Oh, Jun-Seok

2018-04-11

This study evaluated the safety impacts of PCSs with and without pushbuttons based on pedestrian crashes and pedestrian injuries in Michigan. This study used ten years of intersection data: five years before PCSs were installed and five years after they were installed, along with a comparison group, to evaluate the crash impacts of PCSs: at 107 intersections the PCS had a pushbutton and at 96 it did not. At these intersections, and at their comparison sites (where no PCS was installed), crash data (from 2004-2016) were examined, along with traffic and geometric characteristics, population, education and poverty levels data. Intersections where PCSs with pushbuttons have been installed showed a 29 percent reduction in total pedestrian crashes and a 30 percent reduction in fatal/injury pedestrian crashes. Further, when considering only pedestrians age 65 and below, these respective reductions are 33 and 35 percent. Intersections with PCSs but without pushbuttons did not show any significant change in any type of pedestrian crash. Although the Manual of Uniform Traffic Control Devices (FHWA, 2009) requires the use of PCSs at new traffic signal installations, this study suggests a safety benefit of installing PCSs with pushbutton at signals where a PCS without a pushbutton is present.

10 CFR 34.33 - Permanent radiographic installations.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 1 2013-01-01 2013-01-01 false Permanent radiographic installations. 34.33 Section 34.33 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Equipment § 34.33 Permanent radiographic installations. (a...

10 CFR 34.33 - Permanent radiographic installations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 1 2011-01-01 2011-01-01 false Permanent radiographic installations. 34.33 Section 34.33 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Equipment § 34.33 Permanent radiographic installations. (a...

10 CFR 34.33 - Permanent radiographic installations.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 1 2012-01-01 2012-01-01 false Permanent radiographic installations. 34.33 Section 34.33 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Equipment § 34.33 Permanent radiographic installations. (a...

10 CFR 34.33 - Permanent radiographic installations.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 1 2014-01-01 2014-01-01 false Permanent radiographic installations. 34.33 Section 34.33 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Equipment § 34.33 Permanent radiographic installations. (a...

10 CFR 34.33 - Permanent radiographic installations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Permanent radiographic installations. 34.33 Section 34.33 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Equipment § 34.33 Permanent radiographic installations. (a...

MSFC inspections of installed polyimide wire

NASA Technical Reports Server (NTRS)

Landers, Joe C.

1994-01-01

An alert was issued because of the arc-tracking possibilities of installed polyimide wire harnesses. MSFC undertook a program to try to enhance the safety and reliability of these harnesses. Photographs are presented showing the need for inspections of installed wiring harnesses.

The impact of green stormwater infrastructure installation on surrounding health and safety.

PubMed

Kondo, Michelle C; Low, Sarah C; Henning, Jason; Branas, Charles C

2015-03-01

We investigated the health and safety effects of urban green stormwater infrastructure (GSI) installments. We conducted a difference-in-differences analysis of the effects of GSI installments on health (e.g., blood pressure, cholesterol and stress levels) and safety (e.g., felonies, nuisance and property crimes, narcotics crimes) outcomes from 2000 to 2012 in Philadelphia, Pennsylvania. We used mixed-effects regression models to compare differences in pre- and posttreatment measures of outcomes for treatment sites (n=52) and randomly chosen, matched control sites (n=186) within multiple geographic extents surrounding GSI sites. Regression-adjusted models showed consistent and statistically significant reductions in narcotics possession (18%-27% less) within 16th-mile, quarter-mile, half-mile (P<.001), and eighth-mile (P<.01) distances from treatment sites and at the census tract level (P<.01). Narcotics manufacture and burglaries were also significantly reduced at multiple scales. Nonsignificant reductions in homicides, assaults, thefts, public drunkenness, and narcotics sales were associated with GSI installation in at least 1 geographic extent. Health and safety considerations should be included in future assessments of GSI programs. Subsequent studies should assess mechanisms of this association.

The Impact of Green Stormwater Infrastructure Installation on Surrounding Health and Safety

PubMed Central

Low, Sarah C.; Henning, Jason; Branas, Charles C.

2015-01-01

Objectives. We investigated the health and safety effects of urban green stormwater infrastructure (GSI) installments. Methods. We conducted a difference-in-differences analysis of the effects of GSI installments on health (e.g., blood pressure, cholesterol and stress levels) and safety (e.g., felonies, nuisance and property crimes, narcotics crimes) outcomes from 2000 to 2012 in Philadelphia, Pennsylvania. We used mixed-effects regression models to compare differences in pre- and posttreatment measures of outcomes for treatment sites (n = 52) and randomly chosen, matched control sites (n = 186) within multiple geographic extents surrounding GSI sites. Results. Regression-adjusted models showed consistent and statistically significant reductions in narcotics possession (18%–27% less) within 16th-mile, quarter-mile, half-mile (P < .001), and eighth-mile (P < .01) distances from treatment sites and at the census tract level (P < .01). Narcotics manufacture and burglaries were also significantly reduced at multiple scales. Nonsignificant reductions in homicides, assaults, thefts, public drunkenness, and narcotics sales were associated with GSI installation in at least 1 geographic extent. Conclusions. Health and safety considerations should be included in future assessments of GSI programs. Subsequent studies should assess mechanisms of this association. PMID:25602887

14 CFR 29.901 - Installation.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Installation. 29.901 Section 29.901 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS...) Axial and radial expansion of turbine engines may not affect the safety of the installation. (6) Design...

14 CFR 29.901 - Installation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Installation. 29.901 Section 29.901 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS...) Axial and radial expansion of turbine engines may not affect the safety of the installation. (6) Design...

14 CFR 29.901 - Installation.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Installation. 29.901 Section 29.901 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS...) Axial and radial expansion of turbine engines may not affect the safety of the installation. (6) Design...

14 CFR 29.901 - Installation.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Installation. 29.901 Section 29.901 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS...) Axial and radial expansion of turbine engines may not affect the safety of the installation. (6) Design...

14 CFR 29.901 - Installation.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Installation. 29.901 Section 29.901 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS...) Axial and radial expansion of turbine engines may not affect the safety of the installation. (6) Design...

42 CFR 84.196 - Harnesses; installation and construction; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Harnesses; installation and construction; minimum... SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Chemical Cartridge Respirators § 84.196 Harnesses; installation and construction; minimum...

26 CFR 1.381(c)(8)-1 - Installment method.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 26 Internal Revenue 4 2014-04-01 2014-04-01 false Installment method. 1.381(c)(8)-1 Section 1.381... (CONTINUED) INCOME TAXES (CONTINUED) Insolvency Reorganizations § 1.381(c)(8)-1 Installment method. (a... the installment method, then the acquiring corporation shall be treated as the distributor or...

26 CFR 1.381(c)(8)-1 - Installment method.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 26 Internal Revenue 4 2012-04-01 2012-04-01 false Installment method. 1.381(c)(8)-1 Section 1.381... (CONTINUED) INCOME TAXES (Continued) Insolvency Reorganizations § 1.381(c)(8)-1 Installment method. (a... the installment method, then the acquiring corporation shall be treated as the distributor or...

26 CFR 1.381(c)(8)-1 - Installment method.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 26 Internal Revenue 4 2013-04-01 2013-04-01 false Installment method. 1.381(c)(8)-1 Section 1.381... (CONTINUED) INCOME TAXES (CONTINUED) Insolvency Reorganizations § 1.381(c)(8)-1 Installment method. (a... the installment method, then the acquiring corporation shall be treated as the distributor or...

32 CFR 636.11 - Installation traffic codes

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 4 2010-07-01 2010-07-01 true Installation traffic codes 636.11 Section 636.11 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) LAW ENFORCEMENT AND CRIMINAL INVESTIGATIONS MOTOR VEHICLE TRAFFIC SUPERVISION (SPECIFIC INSTALLATIONS) Fort Stewart, Georgia § 636.11 Installation traffic codes In...

WE-F-209-02: Radiation Safety Surveys of Linear Accelerators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martin, M.

2016-06-15

Over the past few years, numerous Accreditation Bodies, Regulatory Agencies, and State Regulations have implemented requirements for Radiation Safety Surveys following installation or modification to x-ray rooms. The objective of this session is to review best practices in performing radiation safety surveys for both Therapy and Diagnostic installations, as well as a review of appropriate survey instruments. This session will be appropriate for both therapy and imaging physicists who are looking to increase their working knowledge of radiation safety surveys. Learning Objectives: Identify Appropriate Survey Meters for Radiation Safety Surveys Develop best practices for Radiation Safety Surveys for Therapy unitsmore » that include common areas of concern. Develop best practices for Radiation Safety Surveys of Diagnostic and Nuclear Medicine rooms. Identify acceptable dose levels and the factors that affect the calculations associated with performing Radiation Safety Surveys.« less

Automated Installation Verification of COMSOL via LiveLink for MATLAB

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crowell, Michael W

Verifying that a local software installation performs as the developer intends is a potentially time-consuming but necessary step for nuclear safety-related codes. Automating this process not only saves time, but can increase reliability and scope of verification compared to ‘hand’ comparisons. While COMSOL does not include automatic installation verification as many commercial codes do, it does provide tools such as LiveLink™ for MATLAB® and the COMSOL API for use with Java® through which the user can automate the process. Here we present a successful automated verification example of a local COMSOL 5.0 installation for nuclear safety-related calculations at the Oakmore » Ridge National Laboratory’s High Flux Isotope Reactor (HFIR).« less

Safety and health in the construction of fixed offshore installations in the petroleum industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1981-01-01

A meeting convened by the ILO (International Labor Office) on safety problems in the offshore petroleum industry recommended the preparation of a code of practice setting out standards for safety and health during the construction of fixed offshore installations. Such a code, to be prepared by the ILO in co-operation with other bodies, including the Inter-Governmental Maritime Consultative Organisation (IMCO), was to take into consideration existing standards applicable to offshore construction activities and to supplement the ILO codes of practice on safety and health in building and civil engineering work, shipbuilding and ship repairing. (Copyright (c) International Labour Organisation 1981.)

Safety assessment of discharge chute isolation barrier preparation and installation. Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meichle, R.H.

1994-10-10

This revision responds to RL comments and increases the discussion of the ``effective hazard categorization`` and the readiness review basis. The safety assessment is made for the activities for the preparation and installation of the discharge chute isolation barriers. The safety assessment includes a hazard assessment and comparison of potential accidents/events to those addressed by the current safety basis documentation. No significant hazards were identified. An evaluation against the USQ evaluation questions were made and the determination made that the activities do not represent a USQ. Hazard categorization techniques were used to provide a basis for readiness review classification.

47 CFR 80.903 - Inspection of radiotelephone installation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ship passes the inspection, the technician will issue a Communications Act Safety Radiotelephony... 47 Telecommunication 5 2010-10-01 2010-10-01 false Inspection of radiotelephone installation. 80... Passenger Boats § 80.903 Inspection of radiotelephone installation. Every vessel subject to Part III of...

42 CFR 84.133 - Harnesses; installation and construction; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Harnesses; installation and construction; minimum... SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Supplied-Air Respirators § 84.133 Harnesses; installation and construction; minimum requirements...

[Expertise level of occupational health physician, implementation of occupational safety and health management system (OSHMS) and occupational safety and health activity level in Japan in the companies listed on Tokyo Stock Exchange first section].

PubMed

Ikeda, Yukiko; Kameda, Takashi; Shirakawa, Chie; Nagata, Tomohisa; Zama, Satoko; Kayashima, Koutarou; Kobayashi, Yuuichi; Mori, Koji

2007-12-01

By enforcement of the revised Japanese Industrial Safety and Health Law on April, 2006, the implementation of OSHMS seems to be expanding and encouraged. In OSHMS of Japan, however, the occupational health aspects have not been put into operated, while only occupational safety aspects have been prioritized. To clarify the issues to deploy OSHMS with occupational health aspects, we conducted a mail survey of 1,581 companies listed on the Tokyo Stock Market First Section in December, 2004. The effective responses were 267 (16.9%). The number of companies which had installed OSHMS, those that planned to install OSHMS and those had no plan for OSHMS were 62 (23.2%), 82 (30.7%) and 123 (46.1%), respectively. Only 12 companies include the complete OH activities in the installed OSHMS. A significant relationship was observed among expertise of OH physicians, actual role and responsibility of OH physicians, installation of OSHMS and OH services quality level. To deploy OSHMS well-balanced for health and safety aspects in present Japan, it was suggested that the education regarding OH operation in OSHMS was necessary to the person in charge of OSHMS in each company, and the participation by OH physicians to operate OSHMS, especially OH physicians with expertise, was essential.

40 CFR 60.1230 - What continuous emission monitoring systems must I install for gaseous pollutants?

Code of Federal Regulations, 2012 CFR

2012-07-01

... according to the “Monitoring Requirements” in § 60.13. (c) You must monitor the oxygen (or carbon dioxide... systems must I install for gaseous pollutants? 60.1230 Section 60.1230 Protection of Environment... Continuous Emission Monitoring § 60.1230 What continuous emission monitoring systems must I install for...

40 CFR 60.1230 - What continuous emission monitoring systems must I install for gaseous pollutants?

Code of Federal Regulations, 2014 CFR

2014-07-01

... according to the “Monitoring Requirements” in § 60.13. (c) You must monitor the oxygen (or carbon dioxide... systems must I install for gaseous pollutants? 60.1230 Section 60.1230 Protection of Environment... Continuous Emission Monitoring § 60.1230 What continuous emission monitoring systems must I install for...

40 CFR 60.1230 - What continuous emission monitoring systems must I install for gaseous pollutants?

Code of Federal Regulations, 2013 CFR

2013-07-01

... according to the “Monitoring Requirements” in § 60.13. (c) You must monitor the oxygen (or carbon dioxide... systems must I install for gaseous pollutants? 60.1230 Section 60.1230 Protection of Environment... Continuous Emission Monitoring § 60.1230 What continuous emission monitoring systems must I install for...

Advanced Design Features of APR1400 and Realization in Shin Kori Construction Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

OH, S.J.; Park, K.C.; Kim, H.G.

2006-07-01

APR1400 adopted several advanced design features. To ensure their proper operation as a part of ShinKori 3,4 project, both experimental and analytical work are continuing. In this paper, work on the advanced design features related to enhanced safety is examined. APR1400 safety injection system consists of four independent trains which include four safety injection pump and tanks. A passive flow regulating device called fluidic device is installed in the safety injection tanks. Separate effect tests including a full scale fluidic device tests have been conducted. Integral system tests are in progress. Combination of these work with the analytical work usingmore » RELAP5/Mod3 would ensure the proper operation of the new safety injection systems. To mitigate severe accidents, hydrogen mitigation system using PARs and igniters is adopted. Also, active injection system and the streamlined insulation design are adopted to enhance the in-vessel retention capability with the external cooling of RPV strategy. Analytic work with supporting experiments is performed. We are certain that these preparatory work would help the successful adaptation of ADF in ShinKori project. (authors)« less

30 CFR 57.9307 - Design, installation, and maintenance of railroads.

Code of Federal Regulations, 2010 CFR

2010-07-01

... railroads. 57.9307 Section 57.9307 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF..., Railroads, and Loading and Dumping Sites § 57.9307 Design, installation, and maintenance of railroads. Roadbeds and all elements of the railroad tracks shall be designed, installed, and maintained to provide...

76 FR 33161 - Installation and Use of Engine Cut-off Switches on Recreational Vessels

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-08

...-off switches as a standard safety feature on propulsion machinery and/or starting controls installed... not most, propulsion machinery and/or starting controls installed on recreational vessels are... new subpart N that would cover propulsion machinery capable of developing static thrust of 115 pounds...

30 CFR 250.802 - Design, installation, and operation of surface production-safety systems.

Code of Federal Regulations, 2011 CFR

2011-07-01

... and electrical systems to be installed were approved by registered professional engineers. After these... reference as specified in § 250.198). (4) Electrical system information including the following: (i) A plan... Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as...

Robust Road Condition Detection System Using In-Vehicle Standard Sensors.

PubMed

Castillo Aguilar, Juan Jesús; Cabrera Carrillo, Juan Antonio; Guerra Fernández, Antonio Jesús; Carabias Acosta, Enrique

2015-12-19

The appearance of active safety systems, such as Anti-lock Braking System, Traction Control System, Stability Control System, etc., represents a major evolution in road safety. In the automotive sector, the term vehicle active safety systems refers to those whose goal is to help avoid a crash or to reduce the risk of having an accident. These systems safeguard us, being in continuous evolution and incorporating new capabilities continuously. In order for these systems and vehicles to work adequately, they need to know some fundamental information: the road condition on which the vehicle is circulating. This early road detection is intended to allow vehicle control systems to act faster and more suitably, thus obtaining a substantial advantage. In this work, we try to detect the road condition the vehicle is being driven on, using the standard sensors installed in commercial vehicles. Vehicle models were programmed in on-board systems to perform real-time estimations of the forces of contact between the wheel and road and the speed of the vehicle. Subsequently, a fuzzy logic block is used to obtain an index representing the road condition. Finally, an artificial neural network was used to provide the optimal slip for each surface. Simulations and experiments verified the proposed method.

Robust Road Condition Detection System Using In-Vehicle Standard Sensors

PubMed Central

Castillo Aguilar, Juan Jesús; Cabrera Carrillo, Juan Antonio; Guerra Fernández, Antonio Jesús; Carabias Acosta, Enrique

2015-01-01

The appearance of active safety systems, such as Anti-lock Braking System, Traction Control System, Stability Control System, etc., represents a major evolution in road safety. In the automotive sector, the term vehicle active safety systems refers to those whose goal is to help avoid a crash or to reduce the risk of having an accident. These systems safeguard us, being in continuous evolution and incorporating new capabilities continuously. In order for these systems and vehicles to work adequately, they need to know some fundamental information: the road condition on which the vehicle is circulating. This early road detection is intended to allow vehicle control systems to act faster and more suitably, thus obtaining a substantial advantage. In this work, we try to detect the road condition the vehicle is being driven on, using the standard sensors installed in commercial vehicles. Vehicle models were programmed in on-board systems to perform real-time estimations of the forces of contact between the wheel and road and the speed of the vehicle. Subsequently, a fuzzy logic block is used to obtain an index representing the road condition. Finally, an artificial neural network was used to provide the optimal slip for each surface. Simulations and experiments verified the proposed method. PMID:26703605

Evaluation of an early warning system for glacial lake outburst flood (GLOF) events in Huaraz, Peru

NASA Astrophysics Data System (ADS)

McKinney, D. C.; Somos-Valenzuela, M. A.

2014-12-01

People in Cordillera Blanca range in Peru have a long history dealing with natural disasters associated to high mountains; particularly Glacier Lakes Outburst Flood (GLOF). Examples in the Cordillera Blanca vary from a GLOF that occurred in 1941 that killed more than 5000 people in the city of Huaraz to recent events from Lake Artison Baja in 2012 and Lake 513 on 2010, which were not devastating thanks to safety systems previously installed in those lakes. However, glaciers continue melting leaving new lakes or changing the characteristics of lakes that were previously controlled making safety systems obsolete that worked successfully in the past protecting communities downstream. Lake Palcacocha has evolved from being safe after the installation of a safety system in 1970 to an imminent source of GLOF risk due to the expansion that has occurred during the last 40 years increasing from a volume of 500,000 to 17 million m3. In response to this risk the community in Huaraz is planning an Early Warning System (EWS) that will allow the population to mobilize to a safe area in case a GLOF occurs. In this work we present an adaptation of the LifeSIM model to calculate the benefits from such an EWS using 2007 census data and a FLO-2D flood simulation model. The outputs are the number of people in Huaraz that could lose their life due to a GLOF. Our results indicate that without an EWS around 19,773 people could lose their life; whereas, if an EWS is installed the number of victims reduces to 7344. Finally, if mobilization of the affected population is improved the value reduces to 2865. The results show the importance of the EWS as well as informing and training the population to how to react if a GLOF occurs.

Automated System of Diagnostic Monitoring at Bureya HPP Hydraulic Engineering Installations: a New Level of Safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Musyurka, A. V., E-mail: musyurkaav@burges.rushydro.ru

This article presents the design, hardware, and software solutions developed and placed in service for the automated system of diagnostic monitoring (ASDM) for hydraulic engineering installations at the Bureya HPP, and assuring a reliable process for monitoring hydraulic engineering installations. Project implementation represents a timely solution of problems addressed by the hydraulic engineering installation diagnostics section.

30 CFR 250.806 - Safety and pollution prevention equipment quality assurance requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Safety and pollution prevention equipment... Gas Production Safety Systems § 250.806 Safety and pollution prevention equipment quality assurance... install only certified safety and pollution prevention equipment (SPPE) in wells located on the OCS. SPPE...

Motivating signage prompts safety belt use among drivers exiting senior communities.

PubMed

Cox, B S; Cox, A B; Cox, D J

2000-01-01

Senior drivers are vulnerable to automobile crashes and subsequent injury and death. Safety belts reduce health risks associated with auto crashes. Therefore, it is important to encourage senior drivers to wear safety belts while driving. Using an AB design, replicated five times, we evaluated the short- and long-term effects of a sign with the message "BUCKLE UP, STAY SAFE" attached to a stop sign at the exits of five different senior communities. Safety belt use was stable during two pretreatment assessments averaged across the five sites and 250 drivers (72% and 68% usage), but significantly increased following installation of these signs (94% usage). Six months after installation of the signs, the effect persisted (88% usage). Use of such signs may be a cost-effective way of promoting safety belt use.

32 CFR 637.3 - Installation Commander.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 4 2010-07-01 2010-07-01 true Installation Commander. 637.3 Section 637.3 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) LAW ENFORCEMENT AND CRIMINAL INVESTIGATIONS MILITARY POLICE INVESTIGATION Investigations § 637.3 Installation Commander. The...

Energy Storage System Safety: Plan Review and Inspection Checklist

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cole, Pam C.; Conover, David R.

Codes, standards, and regulations (CSR) governing the design, construction, installation, commissioning, and operation of the built environment are intended to protect the public health, safety, and welfare. While these documents change over time to address new technology and new safety challenges, there is generally some lag time between the introduction of a technology into the market and the time it is specifically covered in model codes and standards developed in the voluntary sector. After their development, there is also a timeframe of at least a year or two until the codes and standards are adopted. Until existing model codes andmore » standards are updated or new ones are developed and then adopted, one seeking to deploy energy storage technologies or needing to verify the safety of an installation may be challenged in trying to apply currently implemented CSRs to an energy storage system (ESS). The Energy Storage System Guide for Compliance with Safety Codes and Standards1 (CG), developed in June 2016, is intended to help address the acceptability of the design and construction of stationary ESSs, their component parts, and the siting, installation, commissioning, operations, maintenance, and repair/renovation of ESS within the built environment.« less

33 CFR 183.550 - Fuel tanks: Installation.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Fuel tanks: Installation. 183.550...) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Fuel Systems Manufacturer Requirements § 183.550 Fuel tanks: Installation. (a) Each fuel tank must not be integral with any boat structure or mounted on an engine. (b) Each...

32 CFR 634.25 - Installation traffic codes.

Code of Federal Regulations, 2013 CFR

2013-07-01

... riding in a POV whether on or off the installation. (iv) Infant/child restraint devices (car seats) will be required in POVs for children 4 years old or under and not exceeding 45 pounds in weight. (v... development and publication of installation traffic codes will be based on the following: (1) Highway Safety...

32 CFR 634.25 - Installation traffic codes.

Code of Federal Regulations, 2011 CFR

2011-07-01

... riding in a POV whether on or off the installation. (iv) Infant/child restraint devices (car seats) will be required in POVs for children 4 years old or under and not exceeding 45 pounds in weight. (v... development and publication of installation traffic codes will be based on the following: (1) Highway Safety...

30 CFR 250.807 - Additional requirements for subsurface safety valves and related equipment installed in high...

Code of Federal Regulations, 2011 CFR

2011-07-01

... valves and related equipment installed in high pressure high temperature (HPHT) environments. 250.807..., DEPARTMENT OF THE INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and... related equipment installed in high pressure high temperature (HPHT) environments. (a) If you plan to...

33 CFR 183.550 - Fuel tanks: Installation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Fuel tanks: Installation. 183.550...) BOATING SAFETY BOATS AND ASSOCIATED EQUIPMENT Fuel Systems Manufacturer Requirements § 183.550 Fuel tanks: Installation. (a) Each fuel tank must not be integral with any boat structure or mounted on an engine. (b) Each...

Installation of Ceramic Tile: Residential Thin-Set Methods.

ERIC Educational Resources Information Center

Short, Sam

This curriculum guide contains materials for use in teaching a course on residential thin-set methods of tile installation. Covered in the individual units are the following topics: the tile industry; basic math; tools; measurement; safety in tile setting; installation materials and guidelines for their use; floors; counter tops and backsplashes;…

30 CFR 250.807 - Additional requirements for subsurface safety valves and related equipment installed in high...

Code of Federal Regulations, 2010 CFR

2010-07-01

... valves and related equipment installed in high pressure high temperature (HPHT) environments. 250.807... pressure high temperature (HPHT) environments. (a) If you plan to install SSSVs and related equipment in an HPHT environment, you must submit detailed information with your Application for Permit to Drill (APD...

Independent evaluation of the transit retrofit package safety applications : final report.

DOT National Transportation Integrated Search

2015-02-01

This report presents the methodology and results of the independent evaluation of retrofit safety packages installed on transit vehicles in the : Safety Pilot Model Deploymentpart of the United States Department of Transportations Intelligent T...

Evaluating pedestrian safety improvements : final report.

DOT National Transportation Integrated Search

2012-12-01

The purpose of the study was to evaluate the impact of new pedestrian countermeasure installations on pedestrian safety to assist in informing future pedestrian safety initiatives. In order to address these objectives, the WMU team conducted a litera...

Evaluation of Pavement Safety Performance

DOT National Transportation Integrated Search

2015-02-01

The intent of this study was to isolate the effects of various low-cost pavement treatments on roadway safety. This was a retrospective study of pavement safety performance, looking back at crash data before and after treatments were installed. Both ...

30 CFR 77.204 - Openings in surface installations; safeguards.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... 77.204 Section 77.204 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF..., barriers, covers or other protective devices. ...

Development of an Adjustable board and a Rotational Board for Scaffold

NASA Astrophysics Data System (ADS)

Jang, Myunghoun

2017-06-01

Scaffold is widely used in high work-places inside and outside of a building construction site. It is inexpensive and is installed and dismantled easily. Although standards and ledgers of a steel tube and coupler scaffold are installed in a regular distance, the distances of transoms are not equal in some places. Sometimes a working platform or a board is absent in the corner of scaffold. This may cause safety accidents because a foothold is not stable on the transoms. An adjustable safety board and a rotational safety board are suggested in this paper. The adjustable board consists of two footholds. The small one is inserted into the large one. The rotational board covers not only right angle but also acute or obtuse angles. These safety boards for scaffold help to decrease safety accidents in construction sites.

77 FR 64834 - Exelon Generation Company, LLC; Oyster Creek Nuclear Generating Station; Exemption

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-23

... automatic fixed deluge water spray system installed over cable trays and open hatches. The deluge... installed over cable trays and open hatches. The deluge suppression system protecting safety- related cable...

Installation package for air flat plate collector

NASA Technical Reports Server (NTRS)

1977-01-01

The Solar 2 dimensions are four feet by eight feet by two and one half inches. The collector weighs 130 pounds and has an effective solar collection area of over 29.5 square feet. This area represents 95 percent of the total surface of the collector. The installation, operation and maintenance manual, safety hazard analysis, special handling instructions, materials list, installation concept drawings, warranty and certification statement are included in the installation package.

24 CFR 3280.1 - Scope.

Code of Federal Regulations, 2011 CFR

2011-04-01

... MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS General § 3280.1 Scope. This standard covers all equipment and installations in the design, construction, transportation, fire safety, plumbing, heat-producing...

24 CFR 3280.1 - Scope.

Code of Federal Regulations, 2014 CFR

2014-04-01

... MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS General § 3280.1 Scope. This standard covers all equipment and installations in the design, construction, transportation, fire safety, plumbing, heat-producing...

24 CFR 3280.1 - Scope.

Code of Federal Regulations, 2012 CFR

2012-04-01

... MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS General § 3280.1 Scope. This standard covers all equipment and installations in the design, construction, transportation, fire safety, plumbing, heat-producing...

24 CFR 3280.1 - Scope.

Code of Federal Regulations, 2013 CFR

2013-04-01

... MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS General § 3280.1 Scope. This standard covers all equipment and installations in the design, construction, transportation, fire safety, plumbing, heat-producing...

The Plate Boundary Observatory Student Field Assistant Program in Southern California

NASA Astrophysics Data System (ADS)

Seider, E. L.

2007-12-01

Each summer, UNAVCO hires students as part of the Plate Boundary Observatory (PBO) Student Field Assistant Program. PBO, the geodetic component of the NSF-funded EarthScope project, involves the reconnaissance, permitting, installation, documentation, and maintenance of 880 permanent GPS stations in five years. During the summer 2007, nine students from around the US and Puerto Rico were hired to assist PBO engineers during the busy summer field season. From June to September, students worked closely with PBO field engineers to install and maintain permanent GPS stations in all regions of PBO, including Alaska. The PBO Student Field Assistant Program provides students with professional hands-on field experience as well as continuing education in the geosciences. It also gives students a glimpse into the increasing technologies available to the science community, the scope of geophysical research utilizing these technologies, and the field techniques necessary to complete this research. Students in the PBO Field Assistant Program are involved in all aspects of GPS support, including in-warehouse preparation and in-field installations and maintenance. Students are taught practical skills such as drilling, wiring, welding, hardware configuration, documentation, and proper field safety procedures needed to construct permanent GPS stations. These real world experiences provide the students with technical and professional skills that are not always available to them in a classroom, and will benefit them greatly in their future studies and careers. The 2007 summer field season in Southern California consisted of over 35 GPS permanent station installations. To date, the Southern California region of PBO has installed over 190 GPS stations. This poster presentation will highlight the experiences gained by the Southern California student field assistants, while supporting PBO- Southern California GPS installations in the Mohave Desert and the Inyo National Forest.

30 CFR 77.305 - Access to drying chambers, hot gas inlet chambers and ductwork; installation and maintenance.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Access to drying chambers, hot gas inlet chambers and ductwork; installation and maintenance. 77.305 Section 77.305 Mineral Resources MINE SAFETY... drying chambers, hot gas inlet chambers and ductwork; installation and maintenance. Drying chambers, hot...

30 CFR 77.305 - Access to drying chambers, hot gas inlet chambers and ductwork; installation and maintenance.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Access to drying chambers, hot gas inlet chambers and ductwork; installation and maintenance. 77.305 Section 77.305 Mineral Resources MINE SAFETY... drying chambers, hot gas inlet chambers and ductwork; installation and maintenance. Drying chambers, hot...

30 CFR 77.305 - Access to drying chambers, hot gas inlet chambers and ductwork; installation and maintenance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Access to drying chambers, hot gas inlet chambers and ductwork; installation and maintenance. 77.305 Section 77.305 Mineral Resources MINE SAFETY... drying chambers, hot gas inlet chambers and ductwork; installation and maintenance. Drying chambers, hot...

30 CFR 77.305 - Access to drying chambers, hot gas inlet chambers and ductwork; installation and maintenance.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Access to drying chambers, hot gas inlet chambers and ductwork; installation and maintenance. 77.305 Section 77.305 Mineral Resources MINE SAFETY... drying chambers, hot gas inlet chambers and ductwork; installation and maintenance. Drying chambers, hot...

30 CFR 77.305 - Access to drying chambers, hot gas inlet chambers and ductwork; installation and maintenance.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Access to drying chambers, hot gas inlet chambers and ductwork; installation and maintenance. 77.305 Section 77.305 Mineral Resources MINE SAFETY... drying chambers, hot gas inlet chambers and ductwork; installation and maintenance. Drying chambers, hot...

Insulation insomnia: a cure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heyman, M.

1978-09-01

Some answers to questions are provided on home insulation. The first asks about measures to cut home energy use, followed by queries on kinds of insulation available and their differences, description of the R Factor, selecting the best kind, how much insulation and the money it will save, fire safety properties, the use of a vapor barrier, the plugging of attic vents in the winter, and installation information. Some research projects or the fire safety, properties, and installation are reviewed.

40 CFR 60.1720 - What continuous emission monitoring systems must I install for gaseous pollutants?

Code of Federal Regulations, 2014 CFR

2014-07-01

... systems must I install for gaseous pollutants? 60.1720 Section 60.1720 Protection of Environment... or Before August 30, 1999 Model Rule-Continuous Emission Monitoring § 60.1720 What continuous..., maintain, and operate continuous emission monitoring systems for oxygen (or carbon dioxide), sulfur dioxide...

40 CFR 60.1720 - What continuous emission monitoring systems must I install for gaseous pollutants?

Code of Federal Regulations, 2012 CFR

2012-07-01

... systems must I install for gaseous pollutants? 60.1720 Section 60.1720 Protection of Environment... or Before August 30, 1999 Model Rule-Continuous Emission Monitoring § 60.1720 What continuous..., maintain, and operate continuous emission monitoring systems for oxygen (or carbon dioxide), sulfur dioxide...

40 CFR 60.1720 - What continuous emission monitoring systems must I install for gaseous pollutants?

Code of Federal Regulations, 2013 CFR

2013-07-01

... systems must I install for gaseous pollutants? 60.1720 Section 60.1720 Protection of Environment... or Before August 30, 1999 Model Rule-Continuous Emission Monitoring § 60.1720 What continuous..., maintain, and operate continuous emission monitoring systems for oxygen (or carbon dioxide), sulfur dioxide...

30 CFR 77.207 - Illumination.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES Surface Installations § 77.207 Illumination. Illumination sufficient to provide safe working conditions shall be...

46 CFR 56.50-25 - Safety and relief valve escape piping.

Code of Federal Regulations, 2010 CFR

2010-10-01

... supported and installed so that no stress is transmitted to the safety valve body. (c) Safety or relief... or to a remote position to minimize the hazardous effect of the escaping steam. (d) The effect of the...

75 FR 51115 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-18

... Labor--Occupational Safety and Health Administration (OSHA), Office of Management and Budget, Room 10235... information technology, e.g., permitting electronic submission of responses. Agency: Occupational Safety and...-system design and installation, and employee training; annual recertification of safety systems...

Improvement of Energy Efficiency and Environmental Safety of Thermal Energy Through the Implementation of Contact Energy Exchange Processes

NASA Astrophysics Data System (ADS)

Varlamov, Gennadii Borysovich; Romanova, Kateryna Alexandrovna; Nazarova, Iryna; Daschenko, Olga; Kapustiansky, Andry

2017-12-01

Energy efficiency improvement and ecological safety of heat power plants are urgent problems, which require scientifically grounded approaches and solutions. These problems can be solved partly within the presented heat-and-power cycles by including contact energy exchange equipment in the circuits of existing installations. A significant positive effect is obtained in the contact energy exchange installations, such as gas-steam installation `Aquarius' and the contact hydrogen heat generator that also can use hydrogen as a fuel. In these plants, the efficiency increases approximately by 10-12% in comparison with traditional installations, and the concentration of toxic substances, such as nitrogen oxides and carbon monoxide in flue gas can be reduced to 30 mg/m3 and to 5 mg/m3, respectively. Moreover, the plants additionally `generate' the clean water, which can be used for technical purposes.

11. SIDE VIEW OF INSTALLATION OF A CONTINUOUS ROTARYTUBE HYDROFLUORINATOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. SIDE VIEW OF INSTALLATION OF A CONTINUOUS ROTARY-TUBE HYDROFLUORINATOR LOCATED IN ROOM 146. THE HYDROFLUORINATOR IS BEING INSTALLED INSIDE A GLOVE BOX. HYDROFLUORINATION CONVERTED PLUTONIUM OXIDE TO PLUTONIUM TETRAFLUORIDE. (1/11/62) - Rocky Flats Plant, Plutonium Recovery & Fabrication Facility, North-central section of plant, Golden, Jefferson County, CO

40 CFR 60.3038 - What continuous emission monitoring systems must I install?

Code of Federal Regulations, 2012 CFR

2012-07-01

... systems must I install? 60.3038 Section 60.3038 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... December 9, 2004 Model Rule-Monitoring § 60.3038 What continuous emission monitoring systems must I install... carbon monoxide and for oxygen. You must monitor the oxygen concentration at each location where you...

40 CFR 60.3038 - What continuous emission monitoring systems must I install?

Code of Federal Regulations, 2014 CFR

2014-07-01

... systems must I install? 60.3038 Section 60.3038 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... December 9, 2004 Model Rule-Monitoring § 60.3038 What continuous emission monitoring systems must I install... carbon monoxide and for oxygen. You must monitor the oxygen concentration at each location where you...

40 CFR 60.3038 - What continuous emission monitoring systems must I install?

Code of Federal Regulations, 2013 CFR

2013-07-01

... systems must I install? 60.3038 Section 60.3038 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... December 9, 2004 Model Rule-Monitoring § 60.3038 What continuous emission monitoring systems must I install... carbon monoxide and for oxygen. You must monitor the oxygen concentration at each location where you...

Study and Test of a New Bundle-Structure Riser Stress Monitoring Sensor Based on FBG.

PubMed

Xu, Jian; Yang, Dexing; Qin, Chuan; Jiang, Yajun; Sheng, Leixiang; Jia, Xiangyun; Bai, Yang; Shen, Xiaohong; Wang, Haiyan; Deng, Xin; Xu, Liangbin; Jiang, Shiquan

2015-11-24

To meet the requirements of riser safety monitoring in offshore oil fields, a new Fiber Bragg Grating (FBG)-based bundle-structure riser stress monitoring sensor has been developed. In cooperation with many departments, a 49-day marine test in water depths of 1365 m and 1252 m was completed on the "HYSY-981" ocean oil drilling platform. No welding and pasting were used when the sensor was installed on risers. Therefore, the installation is convenient, reliable and harmless to risers. The continuous, reasonable, time-consistent data obtained indicates that the sensor worked normally under water. In all detailed working conditions, the test results show that the sensor can do well in reflecting stresses and bending moments both in and in magnitude. The measured maximum stress is 132.7 MPa, which is below the allowable stress. In drilling and testing conditions, the average riser stress was 86.6 MPa, which is within the range of the China National Offshore Oil Corporation (CNOOC) mechanical simulation results.

Study and Test of a New Bundle-Structure Riser Stress Monitoring Sensor Based on FBG

PubMed Central

Xu, Jian; Yang, Dexing; Qin, Chuan; Jiang, Yajun; Sheng, Leixiang; Jia, Xiangyun; Bai, Yang; Shen, Xiaohong; Wang, Haiyan; Deng, Xin; Xu, Liangbin; Jiang, Shiquan

2015-01-01

To meet the requirements of riser safety monitoring in offshore oil fields, a new Fiber Bragg Grating (FBG)-based bundle-structure riser stress monitoring sensor has been developed. In cooperation with many departments, a 49-day marine test in water depths of 1365 m and 1252 m was completed on the “HYSY-981” ocean oil drilling platform. No welding and pasting were used when the sensor was installed on risers. Therefore, the installation is convenient, reliable and harmless to risers. The continuous, reasonable, time-consistent data obtained indicates that the sensor worked normally under water. In all detailed working conditions, the test results show that the sensor can do well in reflecting stresses and bending moments both in and in magnitude. The measured maximum stress is 132.7 MPa, which is below the allowable stress. In drilling and testing conditions, the average riser stress was 86.6 MPa, which is within the range of the China National Offshore Oil Corporation (CNOOC) mechanical simulation results. PMID:26610517

30 CFR 57.4561 - Stationary diesel equipment underground.

Code of Federal Regulations, 2010 CFR

2010-07-01

....4561 Section 57.4561 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Fire Prevention and Control Installation/construction/maintenance § 57.4561 Stationary diesel equipment...

30 CFR 77.808 - Disconnecting devices.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES Surface High-Voltage Distribution § 77.808 Disconnecting devices. Disconnecting devices shall be installed at the...

30 CFR 77.1713 - Daily inspection of surface coal mine; certified person; reports of inspection.

Code of Federal Regulations, 2010 CFR

2010-07-01

... more often if necessary for safety, each active working area and each active surface installation shall...; certified person; reports of inspection. 77.1713 Section 77.1713 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES...

Detection of errant laser beams

NASA Astrophysics Data System (ADS)

Taylor, Arthur F. D. S.; Edwards, Stanley A.; Barrett, J. A.; Bandle, Anthony M.

1990-10-01

The new generation of automated laser machine tools poses problems for those responsible for setting safety standards. While traditional safeguarding will frustrate full exploitation of this hybrid technology, wholesale abandonment of effective containment in favour of safety monitoring and control systems is unlikely to be acceptable. Long term, quantitative risk assessment will resolve this dilemma. Short term, guide lines will have to be derived from practical considerations of the laser facility design, materials, primary safety devices and procedures. Earlier risk assessments are reviewed relative to the emerging perspective of high average power laser installations. Aspects of extended beam delivery systems and equipment utilization and maintenance are examined to assess possible interaction with operational safety and in particular the potential to adversely influence errant laser beam occurrances (ELBO). To satisfy international safety standards for a laser enclosure which offers flexibility and is cost effective a detection system is described which continuously surveys the inside of the enclosure. Extensive trials have been carried out with high average power lasers (up to 10kW) where a range of engineering materials has been exposed to a laser beam. It is shown that the ratio of detection and shut down time to the burn through time can be an acceptable risk and thus indicate which materials will prove adequate.

30 CFR 250.800 - General requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., installed, used, maintained, and tested in a manner to assure the safety and protection of the human, marine, and coastal environments. Production safety systems operated in subfreezing climates shall utilize...

Development and Installation of a Continuous Water Monitoring Systems for the AEDC

DTIC Science & Technology

1992-08-01

AEDC-TR-92-8 Development and Installation of Continuous Water Monitoring Systems for the AEDC ES Industries 701 South Route 73 Berlin, NJ 08009...Development and Installation of a Continuous Water Monitoring System for the AEDC E AUTHOR(S) Przybyciel, M., Behm, J., and Sampey, T. 7. PERFORMING...Maximum 200 words) A system to sample and analyze water from Rowland Creek at AEDC for hydrocarbon contaminants has been developed under a Small

Assessment of Literature Related to Combustion Appliance Venting Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rapp, V. H.; Less, B. D.; Singer, B. C.

In many residential building retrofit programs, air tightening to increase energy efficiency is often constrained by safety concerns with naturally vented combustion appliances. Tighter residential buildings more readily depressurize when exhaust equipment is operated, making combustion appliances more prone to backdraft or spill combustion exhaust into the living space. Several measures, such as installation guidelines, vent sizing codes, and combustion safety diagnostics, are in place with the intent to prevent backdrafting and combustion spillage, but the diagnostics conflict and the risk mitigation objective is inconsistent. This literature review summarizes the metrics and diagnostics used to assess combustion safety, documents theirmore » technical basis, and investigates their risk mitigations. It compiles information from the following: codes for combustion appliance venting and installation; standards and guidelines for combustion safety diagnostics; research evaluating combustion safety diagnostics; research investigating wind effects on building depressurization and venting; and software for simulating vent system performance.« less

Global Positioning System: A Guide for the Approval of GPS Receiver Installation and Operation

DOT National Transportation Integrated Search

1996-10-01

This guide is designed to assist Federal Aviation Adalnlatratlon (FAA) Aviation Safety : Inspectors (ASIs) in evaluating new Global Positioning Systena (GPS) installations and : operations. Because there aro aany documents providing Information, regu...

Design and performance of a production-worthy excimer-laser-based stepper

NASA Astrophysics Data System (ADS)

Unger, Robert; Sparkes, Christopher; Disessa, Peter A.; Elliott, David J.

1992-06-01

Excimer-laser-based steppers have matured to a production-worthy state. Widefield high-NA lenses have been developed and characterized for imaging down to 0.35 micron and below. Excimer lasers have attained practical levels of performance capability and stability, reliability, safety, and operating cost. Excimer stepper system integration and control issues such as focus, exposure, and overlay stability have been addressed. Enabling support technologies -- resist systems, resist processing, metrology and conventional mask making -- continue to progress and are becoming available. This paper discusses specific excimer stepper design challenges, and presents characterization data from several field installations of XLSTM deep-UV steppers configured with an advanced lens design.

Prioritizing Safety with Seat Belts: The Unanswered Question.

ERIC Educational Resources Information Center

Farrell, Elaine

1987-01-01

Reviews conflicting federal and state developments (including liability lawsuits) involving seat belt installation on school buses. The National Highway Traffic Safety Administration and the National Transportation Safety Board differ on this issue, and several states are considering seat belt legislation or crashworthiness studies. Hints are…

78 FR 21155 - Presence Sensing Device Initiation (PSDI) Standard; Extension of the Office of Management and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-09

... and installation, and worker training; annual recertification of safety systems; establishing and... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0009...) Approval of Information Collection (Paperwork) Requirements AGENCY: Occupational Safety and Health...

30 CFR 77.1437 - End attachment retermination.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 77.1437 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL... at an attachment; (b) Improper installation of an attachment; (c) Slippage at an attachment; or (d...

24 CFR 232.605 - Contract requirements.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Fire Safety Equipment Form of Contract § 232.605 Contract requirements. (a) The contract between the... contract. Either form of contract shall include the cost of fire safety equipment, its installation, and...

24 CFR 232.605 - Contract requirements.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Fire Safety Equipment Form of Contract § 232.605 Contract requirements. (a) The contract between the... contract. Either form of contract shall include the cost of fire safety equipment, its installation, and...

24 CFR 232.605 - Contract requirements.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Fire Safety Equipment Form of Contract § 232.605 Contract requirements. (a) The contract between the... contract. Either form of contract shall include the cost of fire safety equipment, its installation, and...

2005 Tri-Service Infrastructure Systems Conference and Exhibition. Volume 12. Tracks 15, 16 and 17

DTIC Science & Technology

2005-08-04

glare, surface luminances, and uniformity. Also, the importance of daylight on human health and productivity is emphasized. • Exterior lighting design...Electrical Safety Requirements – OSHA CFR Title 29 Part 1910 Occupational Safety and Health Standard, Subpart S – Electrical – Design Safety...Standards and Safety Related Work Practices Part 1926 Safety and Health Regulations for Construction, Subpart K – Electrical – Installation Safety

Encouraging farmers to retrofit tractors: a qualitative analysis of risk perceptions among a group of high-risk farmers in New York.

PubMed

Sorensen, J A; May, J J; Paap, K; Purschwitz, M A; Emmelin, M

2008-01-01

Tractor rollovers continue to be one of the most frequent causes of agricultural fatalities. Despite knowledge of rollovers and the efficacy of rollover protective structures (ROPS), few New York farmers have considered installing ROPS on their unprotected tractors. Qualitative interviews conducted with an "at-risk" segment of the New York farming community indicate that there are a number of barriers to safety in general and to retrofitting, in particular. The following themes and categories emerged in relation to safety and risk taking: constant exposures to risk with positive outcomes normalizes risk; the modeling of risk by significant others positions risk as part of a farming identity; and the pressure to reduce costs, save time, and accept risk frames risk-taking as the cost-effective option (especially in regard to retrofitting, which farmers believe is both expensive and time-consuming). Recommendations for researchers planning retrofitting interventions would be to focus safety messages on the risk to significant others or on the financial impact of rollovers, and to provide financial incentives and assistance to farmers considering retrofitting.

Data Base for Light-Weight Automotive Diesel Power Plants : Volume 3. Miscellaneous Data.

DOT National Transportation Integrated Search

1979-12-01

The effects of fuel economy, emissions, passenger car safety and other variables due to the installation of light-weight Diesel powerplants were studied. Experimental data was obtained on naturally aspirated and turbocharged Diesel engines installed ...

Data Base for Light-Weight Automotive Diesel Power Plants. Volume 2: Discussion and Results.

DOT National Transportation Integrated Search

1979-12-01

The effects on fuel economy, emissions, passenger car safety and other variables due to the installation of light-weight Diesel powerplants were studied. Experimental data was obtained on naturally aspirated and turbocharged Diesel engines installed ...

Data Base for Light-Weight Automotive Diesel Power Plants: Volume 1. Executive Summary.

DOT National Transportation Integrated Search

1979-12-01

The effects on fuel economy, emissions, passenger car safety and other variables due to the installation of light-weight Diesel powerplants were studied. Experimental data was obtained on naturally aspirated and turbocharged Diesel engines installed ...

40 CFR 60.1760 - What is required for my continuous opacity monitoring system and how are the data used?

Code of Federal Regulations, 2011 CFR

2011-07-01

... opacity monitoring system and how are the data used? 60.1760 Section 60.1760 Protection of Environment... continuous opacity monitoring system and how are the data used? (a) Install, calibrate, maintain, and operate a continuous opacity monitoring system. (b) Install, evaluate, and operate each continuous opacity...

40 CFR 63.7331 - What are the installation, operation, and maintenance requirements for my monitors?

Code of Federal Regulations, 2010 CFR

2010-07-01

... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air... baghouse applied to pushing emissions, you must install, operate, and maintain each bag leak detection...

40 CFR 63.9804 - What are my monitoring system installation, operation, and maintenance requirements?

Code of Federal Regulations, 2011 CFR

2011-07-01

... pressure or induced air fabric filters, the bag leak detector must be installed downstream of the fabric... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air...

25 CFR 170.144 - What are eligible highway safety projects?

Code of Federal Regulations, 2011 CFR

2011-04-01

... RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Highway Safety Functions...) Pedestrian paths/sidewalks and bus shelters; (d) Installation and replacement of signs when designated as, or...

25 CFR 170.144 - What are eligible highway safety projects?

Code of Federal Regulations, 2013 CFR

2013-04-01

... RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Highway Safety Functions...) Pedestrian paths/sidewalks and bus shelters; (d) Installation and replacement of signs when designated as, or...

25 CFR 170.144 - What are eligible highway safety projects?

Code of Federal Regulations, 2014 CFR

2014-04-01

... RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Highway Safety Functions...) Pedestrian paths/sidewalks and bus shelters; (d) Installation and replacement of signs when designated as, or...

National Conference on Campus Safety (15th, University of Vermont, Burlington, June 21-26, 1968).

ERIC Educational Resources Information Center

Green, Jack N., Ed.

Presentations made at the fifteenth National Conference on Campus Safety. The following topics are dealt with--(1) Occupational Health on Campus, (2) Teacher Liability in School Accidents, (3) Indoctrinating Students in Fire Safety, (4) Computer Installations Safety and Fire Protection, (5) The Design of Laboratory Buildings, (6) A Uniform System…

46 CFR 31.40-15 - Cargo Ship Safety Radio Certificate-T/ALL.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 1 2011-10-01 2011-10-01 false Cargo Ship Safety Radio Certificate-T/ALL. 31.40-15... CERTIFICATION Certificates Under International Convention for Safety of Life at Sea, 1974 § 31.40-15 Cargo Ship... voyage must have a Cargo Ship Safety Radio Certificate. Each radio installation must meet the...

14 CFR 91.107 - Use of safety belts, shoulder harnesses, and child restraint systems.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 2 2014-01-01 2014-01-01 false Use of safety belts, shoulder harnesses... OPERATING AND FLIGHT RULES Flight Rules General § 91.107 Use of safety belts, shoulder harnesses, and child... board is briefed on how to fasten and unfasten that person's safety belt and, if installed, shoulder...

14 CFR 91.107 - Use of safety belts, shoulder harnesses, and child restraint systems.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 2 2012-01-01 2012-01-01 false Use of safety belts, shoulder harnesses... OPERATING AND FLIGHT RULES Flight Rules General § 91.107 Use of safety belts, shoulder harnesses, and child... board is briefed on how to fasten and unfasten that person's safety belt and, if installed, shoulder...

14 CFR 91.107 - Use of safety belts, shoulder harnesses, and child restraint systems.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 2 2011-01-01 2011-01-01 false Use of safety belts, shoulder harnesses... OPERATING AND FLIGHT RULES Flight Rules General § 91.107 Use of safety belts, shoulder harnesses, and child... fasten and unfasten that person's safety belt and, if installed, shoulder harness. (2) No pilot may cause...

14 CFR 91.107 - Use of safety belts, shoulder harnesses, and child restraint systems.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 2 2013-01-01 2013-01-01 false Use of safety belts, shoulder harnesses... OPERATING AND FLIGHT RULES Flight Rules General § 91.107 Use of safety belts, shoulder harnesses, and child... board is briefed on how to fasten and unfasten that person's safety belt and, if installed, shoulder...

14 CFR 91.107 - Use of safety belts, shoulder harnesses, and child restraint systems.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Use of safety belts, shoulder harnesses... OPERATING AND FLIGHT RULES Flight Rules General § 91.107 Use of safety belts, shoulder harnesses, and child... board is briefed on how to fasten and unfasten that person's safety belt and, if installed, shoulder...

46 CFR 31.40-15 - Cargo Ship Safety Radio Certificate-T/ALL.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 1 2012-10-01 2012-10-01 false Cargo Ship Safety Radio Certificate-T/ALL. 31.40-15... CERTIFICATION Certificates Under International Convention for Safety of Life at Sea, 1974 § 31.40-15 Cargo Ship... voyage must have a Cargo Ship Safety Radio Certificate. Each radio installation must meet the...

46 CFR 31.40-15 - Cargo Ship Safety Radio Certificate-T/ALL.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 1 2014-10-01 2014-10-01 false Cargo Ship Safety Radio Certificate-T/ALL. 31.40-15... CERTIFICATION Certificates Under International Convention for Safety of Life at Sea, 1974 § 31.40-15 Cargo Ship... voyage must have a Cargo Ship Safety Radio Certificate. Each radio installation must meet the...

46 CFR 31.40-15 - Cargo Ship Safety Radio Certificate-T/ALL.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 1 2013-10-01 2013-10-01 false Cargo Ship Safety Radio Certificate-T/ALL. 31.40-15... CERTIFICATION Certificates Under International Convention for Safety of Life at Sea, 1974 § 31.40-15 Cargo Ship... voyage must have a Cargo Ship Safety Radio Certificate. Each radio installation must meet the...

Radiological safety status and quality assurance audit of medical X-ray diagnostic installations in India.

PubMed

Sonawane, A U; Singh, Meghraj; Sunil Kumar, J V K; Kulkarni, Arti; Shirva, V K; Pradhan, A S

2010-10-01

We conducted a radiological safety and quality assurance (QA) audit of 118 medical X-ray diagnostic machines installed in 45 major hospitals in India. The main objective of the audit was to verify compliance with the regulatory requirements stipulated by the national regulatory body. The audit mainly covered accuracy check of accelerating potential (kVp), linearity of tube current (mA station) and timer, congruence of radiation and optical field, and total filtration; in addition, we also reviewed medical X-ray diagnostic installations with reference to room layout of X-ray machines and conduct of radiological protection survey. A QA kit consisting of a kVp Test-O-Meter (ToM) (Model RAD/FLU-9001), dose Test-O-Meter (ToM) (Model 6001), ionization chamber-based radiation survey meter model Gun Monitor and other standard accessories were used for the required measurements. The important areas where there was noncompliance with the national safety code were: inaccuracy of kVp calibration (23%), lack of congruence of radiation and optical field (23%), nonlinearity of mA station (16%) and timer (9%), improper collimator/diaphragm (19.6%), faulty adjustor knob for alignment of field size (4%), nonavailability of warning light (red light) at the entrance of the X-ray room (29%), and use of mobile protective barriers without lead glass viewing window (14%). The present study on the radiological safety status of diagnostic X-ray installations may be a reasonably good representation of the situation in the country as a whole. The study contributes significantly to the improvement of radiological safety by the way of the steps already taken and by providing a vital feed back to the national regulatory body.

30 CFR 57.11012 - Protection for openings around travelways.

Code of Federal Regulations, 2010 CFR

2010-07-01

....11012 Section 57.11012 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL... shall be protected by railings, barriers, or covers. Where it is impractical to install such protective...

Alternative Fuels Data Center: E85 Codes and Standards

Science.gov Websites

Development Equipment Options Equipment Installation Codes, Standards, & Safety Vehicles Laws & ; Incentives Ethanol Codes, Standards, and Safety The U.S. Environmental Protection Agency's (EPA) Office of -Gasoline Blends. The Occupational Safety and Health Administration (OSHA) regulates some fuel-dispensing

32 CFR 1903.4 - Vehicles and traffic safety.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 6 2014-07-01 2014-07-01 false Vehicles and traffic safety. 1903.4 Section 1903.4 National Defense Other Regulations Relating to National Defense CENTRAL INTELLIGENCE AGENCY CONDUCT ON AGENCY INSTALLATIONS § 1903.4 Vehicles and traffic safety. (a) Open container of alcoholic...

32 CFR 1903.4 - Vehicles and traffic safety.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Vehicles and traffic safety. 1903.4 Section 1903.4 National Defense Other Regulations Relating to National Defense CENTRAL INTELLIGENCE AGENCY CONDUCT ON AGENCY INSTALLATIONS § 1903.4 Vehicles and traffic safety. (a) Open container of alcoholic...

32 CFR 1903.4 - Vehicles and traffic safety.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 6 2012-07-01 2012-07-01 false Vehicles and traffic safety. 1903.4 Section 1903.4 National Defense Other Regulations Relating to National Defense CENTRAL INTELLIGENCE AGENCY CONDUCT ON AGENCY INSTALLATIONS § 1903.4 Vehicles and traffic safety. (a) Open container of alcoholic...

32 CFR 1903.4 - Vehicles and traffic safety.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 6 2013-07-01 2013-07-01 false Vehicles and traffic safety. 1903.4 Section 1903.4 National Defense Other Regulations Relating to National Defense CENTRAL INTELLIGENCE AGENCY CONDUCT ON AGENCY INSTALLATIONS § 1903.4 Vehicles and traffic safety. (a) Open container of alcoholic...

32 CFR 1903.4 - Vehicles and traffic safety.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 6 2011-07-01 2011-07-01 false Vehicles and traffic safety. 1903.4 Section 1903.4 National Defense Other Regulations Relating to National Defense CENTRAL INTELLIGENCE AGENCY CONDUCT ON AGENCY INSTALLATIONS § 1903.4 Vehicles and traffic safety. (a) Open container of alcoholic...

30 CFR 57.4530 - Exits for surface buildings and structures.

Code of Federal Regulations, 2010 CFR

2010-07-01

....4530 Section 57.4530 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Fire Prevention and Control Installation/construction/maintenance § 57.4530 Exits for surface buildings...

Safety for Older Consumers: Home Safety Checklist

MedlinePlus

... 3 Keep ashtrays, smoking materi- als, candles, hot plates and other potential fire sources away from curtains, ... A ll electrical outlets and switches have cover plates installed so no wiring is exposed. U nused ...

30 CFR 77.807 - Installation of high-voltage transmission cables.

Code of Federal Regulations, 2010 CFR

2010-07-01

... LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS... against damage. They shall be placed to prevent contact with low-voltage or communication circuits. ...

25 CFR 170.144 - What are eligible highway safety projects?

Code of Federal Regulations, 2012 CFR

2012-04-01

... ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Highway Safety Functions § 170.144... paths/sidewalks and bus shelters; (d) Installation and replacement of signs when designated as, or made...

14 CFR 1214.505 - Program implementation.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 1214.505 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION SPACE FLIGHT Mission... each NASA Installation will designate mission critical space systems areas. (b) NASA installations will... space systems. (e) NASA Headquarters Office of Safety and Mission Quality (Code Q) will act as the...

14 CFR 1214.505 - Program implementation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 1214.505 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION SPACE FLIGHT Mission... each NASA Installation will designate mission critical space systems areas. (b) NASA installations will... space systems. (e) NASA Headquarters Office of Safety and Mission Quality (Code Q) will act as the...

14 CFR 1214.505 - Program implementation.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 1214.505 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION SPACE FLIGHT Mission... each NASA Installation will designate mission critical space systems areas. (b) NASA installations will... space systems. (e) NASA Headquarters Office of Safety and Mission Quality (Code Q) will act as the...

14 CFR 1214.505 - Program implementation.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 1214.505 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION SPACE FLIGHT Mission... each NASA Installation will designate mission critical space systems areas. (b) NASA installations will... space systems. (e) NASA Headquarters Office of Safety and Mission Quality (Code Q) will act as the...

Vehicle safety : technologies, challenges, and research development expenditures for advanced air bags

DOT National Transportation Integrated Search

2001-06-01

Some advanced air bag technologies are currently being installed in vehicles and others are still being developed. The principal advanced technology that is currently being installed in some vehicles is air bags that can inflate with lower or higher ...

32 CFR 700.325 - The Assistant Secretary of the Navy (Installations and Environment).

Code of Federal Regulations, 2011 CFR

2011-07-01

... Secretary of the Navy (Installations and Environment) is responsible for: (a) Policy relating to Navy...) Development, implementation and evaluation of military construction, facilities management and engineering, strategic homeporting, housing, utilities, and base utilization issues; (c) Environmental policy, safety...

30 CFR 250.806 - Safety and pollution prevention equipment quality assurance requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 2 2011-07-01 2011-07-01 false Safety and pollution prevention equipment... pollution prevention equipment quality assurance requirements. (a) General requirements. (1) Except as provided in paragraph (b)(1) of this section, you may install only certified safety and pollution...

30 CFR 77.203 - Use of material or equipment overhead; safeguards.

Code of Federal Regulations, 2010 CFR

2010-07-01

...; safeguards. 77.203 Section 77.203 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS...; safeguards. Where overhead repairs are being made at surface installations and equipment or material is taken...

Proper Installation of New Windows | Efficient Windows Collaborative

Science.gov Websites

airtight fit and avoid water leakage. Always follow manufacturers installation guidelines and use trained professionals for window installation. Proper installation will: Protect from water damage. Windows should form a continuous water barrier where they meet the wall. With improper installation, water may penetrate

24 CFR 232.540 - Method of loan payment and amortization period.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Purchase and Installation of Fire Safety Equipment Eligible Security Instruments § 232.540 Method of loan... either 60, 120, or 180 monthly amortization payments. No fire safety loan shall have an amortization...

24 CFR 232.540 - Method of loan payment and amortization period.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Purchase and Installation of Fire Safety Equipment Eligible Security Instruments § 232.540 Method of loan... either 60, 120, or 180 monthly amortization payments. No fire safety loan shall have an amortization...

24 CFR 232.540 - Method of loan payment and amortization period.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Purchase and Installation of Fire Safety Equipment Eligible Security Instruments § 232.540 Method of loan... either 60, 120, or 180 monthly amortization payments. No fire safety loan shall have an amortization...

Creating a highway information system for safety roadway features.

DOT National Transportation Integrated Search

2015-12-01

Roadway departures are the leading cause of roadside fatalities. The Kentucky Transportation Cabinet (KYTC) has : undertaken a number of roadside safety measures to reduce roadway departures. Specifically, KYTC has installed : several low-cost, syste...

14 CFR § 1214.505 - Program implementation.

Code of Federal Regulations, 2014 CFR

2014-01-01

... § 1214.505 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION SPACE FLIGHT Mission... each NASA Installation will designate mission critical space systems areas. (b) NASA installations will... space systems. (e) NASA Headquarters Office of Safety and Mission Quality (Code Q) will act as the...

77 FR 33724 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-07

... and OMB Number: Assessing Human Response to Military Impulse Noise; OMB Control Number 0710-TBD. Type... community annoyance and complaints, related to impulsive noise from military installations. The [[Page 33725... the need for training operations at military installations with public safety and welfare. Affected...

42 CFR 84.173 - Harnesses; installation and construction; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Harnesses; installation and construction; minimum... SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE... construction; minimum requirements. (a) Each respirator shall, where necessary, be equipped with a suitable...

Maintaining Health and Safety at Workplace: Employee and Employer's Role in Ensuring a Safe Working Environment

ERIC Educational Resources Information Center

Jonathan, Grace Katunge; Mbogo, Rosemary Wahu

2016-01-01

The concern for health and safety is legitimate in every context of human enterprise. In schools, for teaching staff's safety to be guaranteed, the equipment available should be properly maintained and installation for nonexistent ones done according to the health and safety policies. With a focus on Mbooni West district, this paper reports the…

40 CFR 62.14690 - What monitoring equipment must I install and what parameters must I monitor?

Code of Federal Regulations, 2012 CFR

2012-07-01

... each baghouse compartment or cell. For negative pressure or induced air fabric filters, the bag leak... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF STATE PLANS... subpart, you must install, calibrate, maintain, and continuously operate a bag leak detection system as...

40 CFR 62.14690 - What monitoring equipment must I install and what parameters must I monitor?

Code of Federal Regulations, 2014 CFR

2014-07-01

... each baghouse compartment or cell. For negative pressure or induced air fabric filters, the bag leak... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF STATE PLANS... subpart, you must install, calibrate, maintain, and continuously operate a bag leak detection system as...

40 CFR 62.14690 - What monitoring equipment must I install and what parameters must I monitor?

Code of Federal Regulations, 2013 CFR

2013-07-01

... each baghouse compartment or cell. For negative pressure or induced air fabric filters, the bag leak... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF STATE PLANS... subpart, you must install, calibrate, maintain, and continuously operate a bag leak detection system as...

Control system of water flow and casting speed in continuous steel casting

NASA Astrophysics Data System (ADS)

Tirian, G. O.; Gheorghiu, C. A.; Hepuţ, T.; Chioncel, C.

2017-05-01

This paper presents the results of research based on real data taken from the installation process at Arcelor Mittal Hunedoara. Using Matlab Simulink an intelligent system is made that takes in data from the process and makes real time adjustments in the rate of flow of the cooling water and the speed of casting that eliminates fissures in the poured material from the secondary cooling of steel. Using Matlab Simulink simulation environment allowed for qualitative analysis for various real world situations. Thus, compared to the old method of approach for the problem of cracks forming in the crust of the steel in the continuous casting, this new method, proposed and developed, brings safety and precision in this complex process, thus removing any doubt on the existence or non-existence of cracks and takes the necessary steps to prevent and correct them.

Proper Installation of Replacement Windows | Efficient Windows

Science.gov Websites

. Quality installation is critical for an airtight fit and a continuous water barrier to prevent drafts , water damage and condensation. The complexity of the installation depends on whether you are considering and specifications. Install level, plumb, and square. Install water tight: water must be prevented

30 CFR 75.1002 - Installation of electric equipment and conductors; permissibility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... conductors; permissibility. 75.1002 Section 75.1002 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION... Wires and Trolley Feeder Wires § 75.1002 Installation of electric equipment and conductors... equipment is located within 150 feet of pillar workings or longwall faces. (b) Electric conductors and...

30 CFR 75.1002 - Installation of electric equipment and conductors; permissibility.

Code of Federal Regulations, 2011 CFR

2011-07-01

... conductors; permissibility. 75.1002 Section 75.1002 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION... Wires and Trolley Feeder Wires § 75.1002 Installation of electric equipment and conductors... equipment is located within 150 feet of pillar workings or longwall faces. (b) Electric conductors and...

16 CFR 1211.13 - Inherent force activated secondary door sensors.

Code of Federal Regulations, 2011 CFR

2011-01-01

... sensors. 1211.13 Section 1211.13 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT... § 1211.13 Inherent force activated secondary door sensors. (a) Normal operation test. (1) A force activated door sensor of a door system installed according to the installation instructions shall actuate...

16 CFR 1211.13 - Inherent force activated secondary door sensors.

Code of Federal Regulations, 2014 CFR

2014-01-01

... sensors. 1211.13 Section 1211.13 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT... § 1211.13 Inherent force activated secondary door sensors. (a) Normal operation test. (1) A force activated door sensor of a door system installed according to the installation instructions shall actuate...

16 CFR 1211.13 - Inherent force activated secondary door sensors.

Code of Federal Regulations, 2012 CFR

2012-01-01

... sensors. 1211.13 Section 1211.13 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT... § 1211.13 Inherent force activated secondary door sensors. (a) Normal operation test. (1) A force activated door sensor of a door system installed according to the installation instructions shall actuate...

30 CFR 250.802 - Design, installation, and operation of surface production-safety systems.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Production Platform Piping Systems (as incorporated by reference in § 250.198). (4) Electrical system... classified according to API RP 500, Recommended Practice for Classification of Locations for Electrical..., Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities...

30 CFR 250.802 - Design, installation, and operation of surface production-safety systems.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Production Platform Piping Systems (as incorporated by reference in § 250.198). (4) Electrical system... classified according to API RP 500, Recommended Practice for Classification of Locations for Electrical..., Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities...

30 CFR 250.802 - Design, installation, and operation of surface production-safety systems.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Production Platform Piping Systems (as incorporated by reference in § 250.198). (4) Electrical system... classified according to API RP 500, Recommended Practice for Classification of Locations for Electrical..., Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities...

42 CFR 84.1133 - Harnesses; installation and construction; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Harnesses; installation and construction; minimum requirements. 84.1133 Section 84.1133 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE...

42 CFR 84.1133 - Harnesses; installation and construction; minimum requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Harnesses; installation and construction; minimum requirements. 84.1133 Section 84.1133 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE...

42 CFR 84.1133 - Harnesses; installation and construction; minimum requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 1 2013-10-01 2013-10-01 false Harnesses; installation and construction; minimum requirements. 84.1133 Section 84.1133 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE...

42 CFR 84.1133 - Harnesses; installation and construction; minimum requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 1 2014-10-01 2014-10-01 false Harnesses; installation and construction; minimum requirements. 84.1133 Section 84.1133 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE...

42 CFR 84.1133 - Harnesses; installation and construction; minimum requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 1 2012-10-01 2012-10-01 false Harnesses; installation and construction; minimum requirements. 84.1133 Section 84.1133 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE...

42 CFR 84.116 - Harnesses; installation and construction; minimum requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 1 2012-10-01 2012-10-01 false Harnesses; installation and construction; minimum requirements. 84.116 Section 84.116 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE...

42 CFR 84.116 - Harnesses; installation and construction; minimum requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Harnesses; installation and construction; minimum requirements. 84.116 Section 84.116 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE...

42 CFR 84.116 - Harnesses; installation and construction; minimum requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 1 2013-10-01 2013-10-01 false Harnesses; installation and construction; minimum requirements. 84.116 Section 84.116 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE...

42 CFR 84.116 - Harnesses; installation and construction; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Harnesses; installation and construction; minimum requirements. 84.116 Section 84.116 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE...

42 CFR 84.116 - Harnesses; installation and construction; minimum requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 1 2014-10-01 2014-10-01 false Harnesses; installation and construction; minimum requirements. 84.116 Section 84.116 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE...

Safety for Your Child: 8 Years

MedlinePlus

... bike in when the sun starts to set. Car Safety NEVER start the car until you've checked to be sure that ... sure that you and all others in the car are buckled up, too. Install shoulder belts in ...

Leveraging brightness from transportation lighting systems through light source color.

DOT National Transportation Integrated Search

2013-11-01

Roadway transportation lighting is installed for multiple reasons including traffic safety and pedestrian : security. Judgments of pedestrian safety and security along roadways are not strictly correlated to : specified light levels, but the color of...

Surrogate Safety Assessment Model (SSAM)--software user manual

DOT National Transportation Integrated Search

2008-05-01

This document presents guidelines for the installation and use of the Surrogate Safety Assessment Model (SSAM) software. For more information regarding the SSAM application, including discussion of theoretical background and the results of a series o...

Roadway lighting and driver safety

DOT National Transportation Integrated Search

2003-05-01

The objectives of this project were to: a)analyze the safety benefits associated with roadway lighting; b)determine the design of the lighting installation necessary to provide an adequate level of lighting; c)investigate how lighting affects the dri...

Cost-benefit analysis of safety belts in Texas school buses.

PubMed

Begley, C E; Biddle, A K

1988-01-01

Although safety belts have been shown to reduce the risk of serious injury or death in automobile crashes, evidence of their effectiveness in school buses is uncertain. In this paper, the potential costs and benefits of mandatory safety belts in Texas school buses are estimated, based on the assumption that their effectiveness is less than or equal to rear seatbelt effectiveness in autos. Costs are based on both retrofitting old buses with belts and installing them in new buses. Benefits include the direct and indirect (forgone earnings) cost-savings from preventable injuries and fatalities. Results indicate that a law mandating safety belts in Texas school buses would not be cost-beneficial. Annual benefits would exceed the annual costs of installing belts in new school buses. However, the benefits would not be large enough to compensate for the five-year costs associated with retrofitting old buses.

Cost-benefit analysis of safety belts in Texas school buses.

PubMed Central

Begley, C E; Biddle, A K

1988-01-01

Although safety belts have been shown to reduce the risk of serious injury or death in automobile crashes, evidence of their effectiveness in school buses is uncertain. In this paper, the potential costs and benefits of mandatory safety belts in Texas school buses are estimated, based on the assumption that their effectiveness is less than or equal to rear seatbelt effectiveness in autos. Costs are based on both retrofitting old buses with belts and installing them in new buses. Benefits include the direct and indirect (forgone earnings) cost-savings from preventable injuries and fatalities. Results indicate that a law mandating safety belts in Texas school buses would not be cost-beneficial. Annual benefits would exceed the annual costs of installing belts in new school buses. However, the benefits would not be large enough to compensate for the five-year costs associated with retrofitting old buses. PMID:3140273

Mobile site safety review for the transuranic (TRU) waste characterization program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1996-11-01

This Safety Review Document (SRD) applies to the Active/Passive Neutron Examination and Assay (APNEA) system installed on a Lockheed Martin Specialty Components, Inc., (Specialty Components) trailer. The APNEA is designed to perform nuclear waste drum assay. The purpose of this document is to describe the safety features of the APNEA system.

24 CFR 232.510 - Commitment and commitment fee.

Code of Federal Regulations, 2013 CFR

2013-04-01

... of Fire Safety Equipment Fees and Charges § 232.510 Commitment and commitment fee. (a) Issuance of... setting forth the terms and conditions upon which the fire safety loan will be insured. (b) Type of... installation of the fire safety equipment, as determined by the Secretary of HHS. (c) Term of commitment. (1...

24 CFR 232.510 - Commitment and commitment fee.

Code of Federal Regulations, 2012 CFR

2012-04-01

... of Fire Safety Equipment Fees and Charges § 232.510 Commitment and commitment fee. (a) Issuance of... setting forth the terms and conditions upon which the fire safety loan will be insured. (b) Type of... installation of the fire safety equipment, as determined by the Secretary of HHS. (c) Term of commitment. (1...

24 CFR 232.510 - Commitment and commitment fee.

Code of Federal Regulations, 2014 CFR

2014-04-01

... of Fire Safety Equipment Fees and Charges § 232.510 Commitment and commitment fee. (a) Issuance of... setting forth the terms and conditions upon which the fire safety loan will be insured. (b) Type of... installation of the fire safety equipment, as determined by the Secretary of HHS. (c) Term of commitment. (1...

26 CFR 15a.453-1 - Installment method reporting for sales of real property and casual sales of personal property.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 14 2010-04-01 2010-04-01 false Installment method reporting for sales of real property and casual sales of personal property. 15a.453-1 Section 15a.453-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) TEMPORARY INCOME TAX REGULATIONS UNDER THE INSTALLMENT SALES REVISIO...

Investigating the influence on safety of retrofitting Italian motorways with barriers meeting a new EU standard.

PubMed

Cafiso, Salvatore; D'Agostino, Carmelo; Persaud, Bhagwant

2017-04-03

A new European Union (EU) regulation for safety barriers, which is based on performance, has encouraged road agencies to perform an upgrade of old barriers, with the expectation that there will be safety benefits at the retrofitted sites. The new class of barriers was designed and installed in compliance with the 1998 (European Norm) EN 1317 standards for road restraint systems, which lays down common requirements for the testing and certification of road restraint systems in all countries of the European Committee for Standardization (CEN). Both the older and new barriers are made of steel and are installed in such a way as to avoid vehicle intrusion, but the older ones are thought to be only effective at low speeds and large angles of impact. The new standard seeks to remedy this by providing better protection at higher speeds. This article seeks to quantify the effect on the frequency of fatal and injury crashes of retrofitting motorways with barriers meeting the new standards. The estimation of the crash modification was carried out by performing an empirical Bayes before-after analysis based on data from the A18 Messina-Catania motorway in Italy. The methodology has the great advantage to account for the regression to the mean effects. Besides, to account for time trend effects and dispersion of crash data, a modified calibration methodology of safety performance was used. This study, based on data collected on 76 km of motorway in the period 2000-2012, derived Crash Modification Factor point estimates that indicate reductions of 72% for run-off-road fatal and injury crashes and 38% in total fatal and injury crashes that could be expected by upgrading an old safety barrier by complying with new EU 1317 standards. The estimated benefit-cost ratio of 5.57 for total crashes indicates that the treatment is cost effective. The magnitude of this benefit indicates that the retrofits are cost-effective even for total crashes and should continue in any European country inasmuch as the estimated Crash Modification Factors are based on treatment sites that are reasonably representative of all European motorways.

Guide for inservice inspection of ground-based pressure vessels and systems

NASA Technical Reports Server (NTRS)

1976-01-01

This guide includes recommendations for inservice inspection and recertification of ground based, unfired pressure vessels and all pressurized systems including those served by fired pressure vessels hereinafter referred to as pressure vessels, systems and components of systems. It covers the vast array of pound based industrial and special purpose pressurized components and systems used at NASA field installations for research and development and those utility systems and components that require more than routine maintenance to insure continued structural integrity for their useful life. Through surveillance and correction of inservice deterioration, NASA will maintain a safe working environment for their own and contractor personnel, safety for the public sector and protection against loss of capital investment.

Use of portable ladders - field observations and self-reported safety performance in the cable TV industry.

PubMed

Chang, Wen-Ruey; Huang, Yueng-Hsiang; Brunette, Christopher; Lee, Jin

2017-11-01

Portable ladders incidents remain a major cause of falls from heights. This study reported field observations of environments, work conditions and safety behaviour involving portable ladders and their correlations with self-reported safety performance. Seventy-five professional installers of a company in the cable and other pay TV industry were observed for 320 ladder usages at their worksites. The participants also filled out a questionnaire to measure self-reported safety performance. Proper setup on slippery surfaces, correct method for ladder inclination setup and ladder secured at the bottom had the lowest compliance with best practices and training guidelines. The observation compliance score was found to have significant correlation with straight ladder inclined angle (Pearson's r = 0.23, p < 0.0002) and employees' self-reported safety participation (r = 0.29, p < 0.01). The results provide a broad perspective on employees' safety compliance and identify areas for improving safety behaviours. Practitioner Summary: A checklist was used while observing professional installers of a cable company for portable ladder usage at their worksites. Items that had the lowest compliance with best practices and training guidelines were identified. The results provide a broad perspective on employees' safety compliance and identify areas for improving safety behaviours.

40 CFR 62.15215 - What is required for my continuous opacity monitoring system and how are the data used?

Code of Federal Regulations, 2011 CFR

2011-07-01

... opacity monitoring system and how are the data used? 62.15215 Section 62.15215 Protection of Environment... required for my continuous opacity monitoring system and how are the data used? (a) Install, calibrate, maintain, and operate a continuous opacity monitoring system. (b) Install, evaluate, and operate each...

42 CFR 84.73 - Harnesses; installation and construction; minimum requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Harnesses; installation and construction; minimum requirements. 84.73 Section 84.73 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...

42 CFR 84.73 - Harnesses; installation and construction; minimum requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 1 2012-10-01 2012-10-01 false Harnesses; installation and construction; minimum requirements. 84.73 Section 84.73 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...

42 CFR 84.73 - Harnesses; installation and construction; minimum requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 1 2013-10-01 2013-10-01 false Harnesses; installation and construction; minimum requirements. 84.73 Section 84.73 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...

42 CFR 84.73 - Harnesses; installation and construction; minimum requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 1 2014-10-01 2014-10-01 false Harnesses; installation and construction; minimum requirements. 84.73 Section 84.73 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...

42 CFR 84.73 - Harnesses; installation and construction; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Harnesses; installation and construction; minimum requirements. 84.73 Section 84.73 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...

49 CFR 195.428 - Overpressure safety devices and overfill protection systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... API Standard 2510 after October 2, 2000, must have an overfill protection system installed according to section 5.1.2 of API Standard 2510. Other aboveground breakout tanks with 600 gallons (2271 liters... have an overfill protection system installed according to API Recommended Practice 2350. However...

49 CFR 195.428 - Overpressure safety devices and overfill protection systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... API Standard 2510 after October 2, 2000, must have an overfill protection system installed according to section 5.1.2 of API Standard 2510. Other aboveground breakout tanks with 600 gallons (2271 liters... have an overfill protection system installed according to API Recommended Practice 2350. However...

49 CFR 195.428 - Overpressure safety devices and overfill protection systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... API Standard 2510 after October 2, 2000, must have an overfill protection system installed according to section 5.1.2 of API Standard 2510. Other aboveground breakout tanks with 600 gallons (2271 liters... have an overfill protection system installed according to API Recommended Practice 2350. However...

49 CFR 195.428 - Overpressure safety devices and overfill protection systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... API Standard 2510 after October 2, 2000, must have an overfill protection system installed according to section 5.1.2 of API Standard 2510. Other aboveground breakout tanks with 600 gallons (2271 liters... have an overfill protection system installed according to API Recommended Practice 2350. However...

77 FR 60482 - Yankee Atomic Electric Company; Yankee Rowe Independent Spent Fuel Storage Installation, Staff...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-03

... Company; Yankee Rowe Independent Spent Fuel Storage Installation, Staff Evaluation; Exemption 1.0... exemption requests, the NRC staff believes that YAEC should be granted exemptions from the following.... Additional information regarding the NRC (staff) evaluation is documented in a Safety Evaluation Report that...

77 FR 48565 - Maine Yankee Atomic Power Company, Maine Yankee Independent Spent Fuel Storage Installation...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-14

... Power Company, Maine Yankee Independent Spent Fuel Storage Installation, Exemption--Staff Evaluation 1.0... in its November 29, 2010, letter. After evaluating the exemption requests, the staff determined that... staff evaluation is documented in a Safety Evaluation Report that contains Sensitive Unclassified Non...

77 FR 33005 - Connecticut Yankee Atomic Power Company; Haddam Neck Independent Spent Fuel Storage Installation...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-04

... Atomic Power Company; Haddam Neck Independent Spent Fuel Storage Installation, Staff Evaluation... requests, the staff determined CYAPCO should be granted exemptions from the following requirements: 10 CFR... regarding the NRC staff evaluation is documented in a Safety Evaluation Report that contains Sensitive...

77 FR 59749 - Safety Zone; Submarine Cable Installation Project; Chicago River, Chicago, IL

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-01

... lines. C. Discussion of Rule With the aforementioned hazards in mind, the Captain of the Port, Sector... significant effect on the human environment. This rule involves the establishment of a safety zone and...

Effects of digital countdown timer on intersection safety and efficiency: A systematic review.

PubMed

Fu, Chuanyun; Zhang, Yaping; Qi, Weiwei; Cheng, Shaowu

2016-01-01

To investigate the available evidence referring to the effectiveness of digital countdown timers (DCTs) in improving the safety and operational efficiency of signalized intersection. A systematic review was performed according to the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) statement guidelines. Relevant literature was searched from electronic databases using key terms. Based on study selection and methodological quality assessment, 14 studies were included in the review. Findings of the studies were synthesized in a narrative analysis. Three types of DCT had different effects on intersection safety and operational efficiency. Green signal countdown timers (GSCTs) reduced red light violations, type I dilemma zone distributions, and rear-end collision likelihood but increased crossing after yellow onset and had mixed impacts on type II dilemma zone distributions and intersection capacity. In contrast, red signal countdown timers (RSCTs) increased intersection capacity, although their effectiveness in reducing red light violations dissipated over time. Likewise, continuous countdown timers (CCTs) significantly enhanced intersection capacity but had mixed influences on red light violations and crossing after yellow onset. Due to the limited and inconsistent evidence regarding DCTs' effects on intersection safety and efficiency, it is not sufficient to recommend any type of DCT to be installed at signalized intersections to improve safety and operational efficiency. Nevertheless, it is apparent that both RSCTs and CCTs enhance intersection capacity, though their impacts on intersection safety are unclear. Future studies need to further verify those anticipated safe and operational benefits of DCTs with enriched field observation data.

Integrating Cost-effective Rollover Protective Structure Installation in High School Agricultural Mechanics: A Feasibility Study.

PubMed

Mazur, Joan; Vincent, Stacy; Watson, Jennifer; Westneat, Susan

2015-01-01

This study with three Appalachian county agricultural education programs examined the feasibility, effectiveness, and impact of integrating a cost-effective rollover protective structure (CROPS) project into high school agricultural mechanics classes. The project aimed to (1) reduce the exposure to tractor overturn hazards in three rural counties through the installation of CROPS on seven tractors within the Cumberland Plateau in the east region; (2) increase awareness in the targeted rural communities of cost-effective ROPS designs developed by the National Institution for Occupational Safety and Health (NIOSH) to encourage ROPS installations that decrease the costs of a retrofit; (3) test the feasibility of integration of CROPS construction and installations procedures into the required agricultural mechanics classes in these agricultural education programs; and (4) explore barriers to the implementation of this project in high school agricultural education programs. Eighty-two rural students and three agricultural educators participated in assembly and installation instruction. Data included hazard exposure demographic data, knowledge and awareness of CROPS plans, and pre-post knowledge of construction and assessment of final CROPS installation. Findings demonstrated the feasibility and utility of a CROPS education program in a professionally supervised secondary educational setting. The project promoted farm safety and awareness of availability and interest in the NIOSH Cost-effective ROPS plans. Seven CROPS were constructed and installed. New curriculum and knowledge measures also resulted from the work. Lessons learned and recommendations for a phase 2 implementation and further research are included.

Detection and localization of building insulation faults using optical-fiber DTS system

NASA Astrophysics Data System (ADS)

Papes, Martin; Liner, Andrej; Koudelka, Petr; Siska, Petr; Cubik, Jakub; Kepak, Stanislav; Jaros, Jakub; Vasinek, Vladimir

2013-05-01

Nowadays the trends in the construction industry are changing at an incredible speed. The new technologies are still emerging on the market. Sphere of building insulation is not an exception as well. One of the major problems in building insulation is usually its failure, whether caused by unwanted mechanical intervention or improper installation. The localization of these faults is quite difficult, often impossible without large intervention into the construction. As a proper solution for this problem might be utilization of Optical-Fiber DTS system based on stimulated Raman scattering. Used DTS system is primary designed for continuous measurement of the temperature along the optical fiber. This system is using standard optical fiber as a sensor, which brings several advantages in its application. First, the optical fiber is relatively inexpensive, which allows to cover a quite large area for a small cost. The other main advantages of the optical fiber are electromagnetic resistance, small size, safety operation in inflammable or explosive area, easy installation, etc. This article is dealing with the detection and localization of building insulation faults using mentioned system.

Fuel cells provide a revenue-generating solution to power quality problems

DOE Office of Scientific and Technical Information (OSTI.GOV)

King, J.M. Jr.

Electric power quality and reliability are becoming increasingly important as computers and microprocessors assume a larger role in commercial, health care and industrial buildings and processes. At the same time, constraints on transmission and distribution of power from central stations are making local areas vulnerable to low voltage, load addition limitations, power quality and power reliability problems. Many customers currently utilize some form of premium power in the form of standby generators and/or UPS systems. These include customers where continuous power is required because of health and safety or security reasons (hospitals, nursing homes, places of public assembly, air trafficmore » control, military installations, telecommunications, etc.) These also include customers with industrial or commercial processes which can`t tolerance an interruption of power because of product loss or equipment damage. The paper discusses the use of the PC25 fuel cell power plant for backup and parallel power supplies for critical industrial applications. Several PC25 installations are described: the use of propane in a PC25; the use by rural cooperatives; and a demonstration of PC25 technology using landfill gas.« less

Surveillance data management system

NASA Astrophysics Data System (ADS)

Teague, Ralph

2002-10-01

On October 8, 2001, an Executive Order was signed creating the White House Office of Homeland Security. With its formaiton comes focused attention in setting goals and priorities for homeland security. Analysis, preparation, and implementation of strategies will hinge not only on how information is collected and analyzed, but more important, on how it is coordinated and shared. Military installations/facilities, Public safety agencies, airports, federal and local offices, public utilities, harbors, transportation and others critical areas must work either independently or as a team to ensure the safety of our citizens and visitor. In this new era of increased security, the key to interoperation is continuous information exchanged-events must be rapidly identified, reported and responded to by the appropriate agencies. For instance when a threat has been detected the security officers must be immediately alerted and must have access to the type of threat, location, movement, heading, threat size, etc to respond accordingly and the type of support required. This requires instant communications and teamwork with reliable and flexible technology.

CORS911:Real-Time Subsidence Monitoring of the Napoleonville Salt Dome Sinkhole Using GPS

NASA Astrophysics Data System (ADS)

Kent, J. D.

2013-12-01

The sinkhole associated with the Napoleonville salt dome in Assumption Parish, Louisiana, threatens the stability of Highway 70 - a state maintained route. To mitigate the potential damaging effects to the highway and address issues of public safety, a program of research and decision support has been implemented to provide long-term measurements of the surface stability using continuous operating GPS reference stations (CORS). Four CORS sites were installed in the vicinity of the sinkhole to measure the horizontal and vertical motions of each site relative to each other and a fixed location outside the study area. Differential motions measured by a integrity monitoring software are summarized for response agencies tasked with ensuring public safety and stability of the Highway, a designated hurricane evacuation route. Implementation experience and intermediate findings will be shared and discussed. Strategies for monitoring random and systematic biases detected in the system are presented. Figure depicting the location of CORS sites used to monitor surface stability along Highway 70 near the Bayou Corne Sinkhole.

32 CFR 631.16 - Navy policy.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 4 2014-07-01 2013-07-01 true Navy policy. 631.16 Section 631.16 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) LAW ENFORCEMENT AND CRIMINAL... mission accomplishment. Installation commanders may authorize off-installation operations as required by...

32 CFR 631.16 - Navy policy.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 4 2013-07-01 2013-07-01 false Navy policy. 631.16 Section 631.16 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) LAW ENFORCEMENT AND CRIMINAL... mission accomplishment. Installation commanders may authorize off-installation operations as required by...

32 CFR 631.16 - Navy policy.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 4 2012-07-01 2011-07-01 true Navy policy. 631.16 Section 631.16 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) LAW ENFORCEMENT AND CRIMINAL... mission accomplishment. Installation commanders may authorize off-installation operations as required by...

32 CFR 631.16 - Navy policy.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 4 2011-07-01 2011-07-01 false Navy policy. 631.16 Section 631.16 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) LAW ENFORCEMENT AND CRIMINAL... mission accomplishment. Installation commanders may authorize off-installation operations as required by...

32 CFR 631.16 - Navy policy.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 4 2010-07-01 2010-07-01 true Navy policy. 631.16 Section 631.16 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) LAW ENFORCEMENT AND CRIMINAL... mission accomplishment. Installation commanders may authorize off-installation operations as required by...

32 CFR 651.6 - NEPA analysis staffing.

Code of Federal Regulations, 2010 CFR

2010-07-01

... National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) ENVIRONMENTAL QUALITY... management is not in the proponents' chain of command (for example, installation management of a range for MATDEV testing or installation management of a fielding location), the proponent shall coordinate the...

Practical aspects of instrumentation system installation, volume 13

NASA Technical Reports Server (NTRS)

Borek, R. W.; Pool, A. (Editor); Sanderson, K. C. (Editor)

1981-01-01

A review of factors influencing installation of aircraft flight test instrumentation is presented. Requirements, including such factors as environment, reliability, maintainability, and system safety are discussed. The assessment of the mission profile is followed by an overview of electrical and mechanical installation factors with emphasis on shock/vibration isolation systems and standardization of the electric wiring installation, two factors often overlooked by instrumentation engineers. A discussion of installation hardware reviews the performance capabilities of wiring, connectors, fuses and circuit breakers, and a guide to proper selections is provided. The discussion of the installation is primarily concerned with the electrical wire routing, shield terminations and grounding. Also inclued are some examples of installation mistakes that could affect system accuracy. System verification procedures and special considerations such as sneak circuits, pyrotechnics, aircraft antenna patterns, and lightning strikes are discussed.

Review of the FY15 Defense Environmental International Cooperation (DEIC) Program

DTIC Science & Technology

2016-03-01

Secretary of Defense for Energy, Installations and Environmental, Environmental Safety and Occupational Health [OASD (EI&E/ESOH)]. The views, opinions...DEIC Program The DEIC program, which resides within the Environment, Safety , and Occupational Health (ESOH) office of the Deputy Under Secretary of...resiliency, maritime safety and security, and environmental protection in general. 7 While this

Evaluation of fire-safety programs that use 10-year smoke alarms.

PubMed

Jackson, Mark; Wilson, Jonathan; Akoto, Judith; Dixon, Sherry; Jacobs, David E; Ballesteros, Michael F

2010-10-01

The Centers for Disease Control and Prevention began funding a Smoke Alarm Installation and Fire Safety Education (SAIFE) program in 1998. This program involves the installation of lithium-powered "10-year" smoke alarms in homes at high risk for fires and injuries. This study aimed to (1) determine among original SAIFE homes if the lithium-powered alarms were still present and functional 8-10 years after installation and (2) understand factors related to smoke alarm presence and functionality. Data on a total of 384 homes and 601 smoke alarms in five states were collected and analyzed. Only one-third of alarms were still functional; 37% of installed alarms were missing; and 30% of alarms were present, but not functioning. Alarms were less likely to be functioning if they were installed in the kitchen and if homes had a different resident at follow-up. Of the 351 alarms that were present and had a battery at the time of the evaluation, only 21% contained lithium-powered batteries. Of these, 78% were still functioning. Programs that install lithium-powered alarms should use units that have sealed-in batteries and "hush" buttons. Additionally, education should be given on smoke alarm maintenance that includes a message that batteries in these alarms should not be replaced. Lithium-powered smoke alarms should last up to 10 years if maintained properly.

Evaluation of IdaShield sign safety benefits at highway-rail crossing in Idaho.

DOT National Transportation Integrated Search

2014-11-01

This report describes findings from a study aimed at assessing the safety impact of IdaShield signs installed at 1,341 highway : railroad crossings in Idaho. Specifically, our research assessed the markers effectiveness using three measures: : ...

Summary of DOT Rail-Highway Crossing Resource Allocation Procedure - Revised

DOT National Transportation Integrated Search

1987-06-01

The Highway Safety Acts of 1973 and 1976, and the Surface Transportation Assistance Acts of 1978 and 1982 provide funding authorizations to individual states to improve safety at public rail-highway crossings. The installation of active motorist warn...

40 CFR 63.1572 - What are my monitoring installation, operation, and maintenance requirements?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 13 2013-07-01 2012-07-01 true What are my monitoring installation... Compliance Requirements § 63.1572 What are my monitoring installation, operation, and maintenance requirements? (a) You must install, operate, and maintain each continuous emission monitoring system according...

40 CFR 63.1572 - What are my monitoring installation, operation, and maintenance requirements?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 12 2011-07-01 2009-07-01 true What are my monitoring installation... Requirements § 63.1572 What are my monitoring installation, operation, and maintenance requirements? (a) You must install, operate, and maintain each continuous emission monitoring system according to the...

40 CFR 63.1572 - What are my monitoring installation, operation, and maintenance requirements?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 13 2014-07-01 2014-07-01 false What are my monitoring installation... Compliance Requirements § 63.1572 What are my monitoring installation, operation, and maintenance requirements? (a) You must install, operate, and maintain each continuous emission monitoring system according...

46 CFR 183.200 - General design, installation, and maintenance requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false General design, installation, and maintenance requirements. 183.200 Section 183.200 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) ELECTRICAL INSTALLATION General Requirements § 183.200 General design, installation, and maintenance...

46 CFR 129.200 - Design, installation, and maintenance.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Design, installation, and maintenance. 129.200 Section 129.200 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS ELECTRICAL INSTALLATIONS General Requirements § 129.200 Design, installation, and maintenance. Electrical equipment on a vessel must be designed,...

46 CFR 183.200 - General design, installation, and maintenance requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false General design, installation, and maintenance requirements. 183.200 Section 183.200 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) ELECTRICAL INSTALLATION General Requirements § 183.200 General design, installation, and maintenance...

46 CFR 183.200 - General design, installation, and maintenance requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false General design, installation, and maintenance requirements. 183.200 Section 183.200 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) ELECTRICAL INSTALLATION General Requirements § 183.200 General design, installation, and maintenance...

46 CFR 183.200 - General design, installation, and maintenance requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false General design, installation, and maintenance requirements. 183.200 Section 183.200 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) ELECTRICAL INSTALLATION General Requirements § 183.200 General design, installation, and maintenance...

46 CFR 129.200 - Design, installation, and maintenance.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Design, installation, and maintenance. 129.200 Section 129.200 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS ELECTRICAL INSTALLATIONS General Requirements § 129.200 Design, installation, and maintenance. Electrical equipment on a vessel must be designed,...

32 CFR 700.325 - The Assistant Secretary of the Navy (Installations and Environment).

Code of Federal Regulations, 2010 CFR

2010-07-01

... (Installations and Environment). 700.325 Section 700.325 National Defense Department of Defense (Continued... Assistants § 700.325 The Assistant Secretary of the Navy (Installations and Environment). The Assistant Secretary of the Navy (Installations and Environment) is responsible for: (a) Policy relating to Navy...

40 CFR 90.311 - Test conditions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 20 2011-07-01 2011-07-01 false Test conditions. 90.311 Section 90.311 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF... must be installed on the test bed at their design installation angle to prevent abnormal fuel...

Continuous flight auger pile bridge foundation : Implementation Phase I : Texas Gulf Coast Region : final report.

DOT National Transportation Integrated Search

2004-01-01

Continuous flight auger (CFA) piles better known as Augered, Cast In-Place (ACIP) piles have been widely used in the United States for several decades because of relatively rapid installation and minimum environmental impact during installation with ...

40 CFR 140.2 - Scope of standard.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) MARINE... which a marine sanitation device has been installed. The standard does not require the installation of a marine sanitation device on any vessel that is not so equipped. The standard applies to vessels owned and...

30 CFR 250.517 - Tubing and wellhead equipment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... evaluated every 30 days and the results submitted to the District Manager. (c) When the tree is installed..., a surface tubing head, a surface tubing hanger, and a surface christmas tree. (d) Wellhead, tree... and one surface safety valve, installed above the master valve, in the vertical run of the tree. (e...

75 FR 35877 - Bentley Motors Inc., Receipt of Petition for Decision of Inconsequential Noncompliance

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-23

...) of Federal Motor Vehicle Safety Standard (FMVSS) No. 209, Seat Belt Assemblies. BMI filed an... approximately 300 nonconforming seat belt assemblies, produced during the 12 months prior to December 18, 2009...) Installation instructions. A seat belt assembly, other than a seat belt assembly installed in a motor vehicle...

16 CFR § 1211.13 - Inherent force activated secondary door sensors.

Code of Federal Regulations, 2013 CFR

2013-01-01

... sensors. § 1211.13 Section § 1211.13 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER... Standard § 1211.13 Inherent force activated secondary door sensors. (a) Normal operation test. (1) A force activated door sensor of a door system installed according to the installation instructions shall actuate...

10 CFR 34.75 - Records of alarm system and entrance control checks at permanent radiographic installations.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 1 2012-01-01 2012-01-01 false Records of alarm system and entrance control checks at permanent radiographic installations. 34.75 Section 34.75 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping...

10 CFR 34.75 - Records of alarm system and entrance control checks at permanent radiographic installations.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 1 2014-01-01 2014-01-01 false Records of alarm system and entrance control checks at permanent radiographic installations. 34.75 Section 34.75 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping...

10 CFR 34.75 - Records of alarm system and entrance control checks at permanent radiographic installations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 1 2011-01-01 2011-01-01 false Records of alarm system and entrance control checks at permanent radiographic installations. 34.75 Section 34.75 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping...

10 CFR 34.75 - Records of alarm system and entrance control checks at permanent radiographic installations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Records of alarm system and entrance control checks at permanent radiographic installations. 34.75 Section 34.75 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping...

10 CFR 34.75 - Records of alarm system and entrance control checks at permanent radiographic installations.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 1 2013-01-01 2013-01-01 false Records of alarm system and entrance control checks at permanent radiographic installations. 34.75 Section 34.75 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping...

A feasibility assessment of installation, operation and disposal options for nuclear reactor power system concepts for a NASA growth space station

NASA Technical Reports Server (NTRS)

Bloomfield, Harvey S.; Heller, Jack A.

1987-01-01

A preliminary feasibility assessment of the integration of reactor power system concepts with a projected growth space station architecture was conducted to address a variety of installation, operational disposition, and safety issues. A previous NASA sponsored study, which showed the advantages of space station - attached concepts, served as the basis for this study. A study methodology was defined and implemented to assess compatible combinations of reactor power installation concepts, disposal destinations, and propulsion methods. Three installation concepts that met a set of integration criteria were characterized from a configuration and operational viewpoint, with end-of-life disposal mass identified. Disposal destinations that met current aerospace nuclear safety criteria were identified and characterized from an operational and energy requirements viewpoint, with delta-V energy requirement as a key parameter. Chemical propulsion methods that met current and near-term application criteria were identified and payload mass and delta-V capabilities were characterized. These capabilities were matched against concept disposal mass and destination delta-V requirements to provide the feasibility of each combination.

A cost analysis of a smoke alarm installation and fire safety education program.

PubMed

Parmer, John E; Corso, Phaedra S; Ballesteros, Michael F

2006-01-01

While smoke alarm installation programs can help prevent residential fire injuries, the costs of running these programs are not well understood. We conducted a retrospective cost analysis of a smoke alarm installation program in 12 funded communities across four states. Costs included financial and economic resources needed for training, canvassing, installing, and following-up, within four cost categories: (a) personnel, (b) transportation, (c) facility, and (d) supplies. Local cost per completed home visit averaged 214.54 dollars, with an average local cost per alarm installed of 115.02 dollars. Combined state and local cost per alarm installed across all four states averaged 132.15 dollars. For every 1% increase in alarm installation, costs per alarm decrease by 1.32 dollars. As more smoke alarms are installed, the average installation cost per alarm decreases. By demonstrating effective economies of scale, this study suggests that smoke alarm programs can be implemented efficiently and receive positive economic returns on investment.

A Misleading Safety Record.

ERIC Educational Resources Information Center

Fast, Carol

1985-01-01

Comparing the safety record of school buses to that of automobiles does not account for the nonschool time when automobiles are used. Experiences where seat belts are installed in school buses show that students use them, insurance is not a problem, and cost is slight. (MLF)

Operational and safety efficiency of traffic signal installations.

DOT National Transportation Integrated Search

2008-05-01

The basic principle of signalization is the provision of a safe and effective means for time and space allocation at an intersection for both vehicular and pedestrian needs. The safety community concurs on the fact that there is the potential for saf...

26 CFR 1.381(c)(8)-1 - Installment method.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 4 2010-04-01 2010-04-01 false Installment method. 1.381(c)(8)-1 Section 1.381... (CONTINUED) INCOME TAXES Insolvency Reorganizations § 1.381(c)(8)-1 Installment method. (a) Carryover... corporation has elected under section 453 and the regulations thereunder to report on the installment method...

26 CFR 1.381(c)(8)-1 - Installment method.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 4 2011-04-01 2011-04-01 false Installment method. 1.381(c)(8)-1 Section 1.381... (CONTINUED) INCOME TAXES Insolvency Reorganizations § 1.381(c)(8)-1 Installment method. (a) Carryover... corporation has elected under section 453 and the regulations thereunder to report on the installment method...

46 CFR 58.10-10 - Diesel engine installations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 2 2013-10-01 2013-10-01 false Diesel engine installations. 58.10-10 Section 58.10-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MAIN AND AUXILIARY... installations. (a) The requirements of § 58.10-5 (a), (c), and (d) shall apply to diesel engine installations...

Architecting Integrated System Health Management for Airworthiness

DTIC Science & Technology

2013-09-01

aircraft safety and reliability through condition-based maintenance [Miller et al., 1991]. With the same motivation, Integrated System Health Management...diagnostics and prognostics algorithms. 2.2.2 Health and Usage Monitoring System (HUMS) in Helicopters Increased demand for improved operational safety ...offshore shuttle helicopters traversing the petrol installations in the North Sea, and increased demand for improved operational safety and reduced

AGOR 28: SIO Shipyard Representative Bi-Weekly Progress Report

DTIC Science & Technology

2015-05-08

work on initial outfitting lists for Sally Ride. ii. Working on NS5 Hierarchy 4. Operator Concerns: • Tuff-Mass MLV and Acoustic Tiles – The...yard is continuing to install the Quad-zero MLV in various locations throughout Sally Ride. DCI is holding off on installing any new insulation in...Traction Winch Rm fwd bulkhead tiles • Sally Ride Quad-Zero MLV – The yard continues to install the Quad-Zero in location with no sound dampening tiles

A-3 Test Stand continues with test cell installation

NASA Image and Video Library

2010-07-20

Employees at Stennis Space Center continue work on the A-3 Test Stand. As shown, a section of the test cell is lifted for installation on the stand's structural steel frame. Work on the A-3 Test Stand began in 2007. It is scheduled for activation in 2012.

76 FR 9984 - Airworthiness Directives; B/E Aerospace, Continuous Flow Passenger Oxygen Mask Assembly, Part...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-23

..., Continuous Flow Passenger Oxygen Mask Assembly, Part Numbers 174006-(), 174080-(), 174085-(), 174095... manufacturer and part number of the oxygen mask assemblies installed, an inspection to determine the manufacturing date and modification status if certain oxygen mask assemblies are installed, and corrective...

40 CFR Table 12 to Subpart G of... - Monitoring Requirements for Treatment Processes

Code of Federal Regulations, 2013 CFR

2013-07-01

... Appropriate methods as specified in § 63.143 and as approved by permitting authority. 2. Steam stripper (i... recorder. (ii) Wastewater feed mass flow rate; and Continuously Liquid flow meter installed at stripper... operating temperature Continuously (A) Liquid temperature monitoring device installed at stripper influent...

40 CFR Table 12 to Subpart G of... - Monitoring Requirements for Treatment Processes

Code of Federal Regulations, 2010 CFR

2010-07-01

... Appropriate methods as specified in § 63.143 and as approved by permitting authority. 2. Steam stripper (i... recorder. (ii) Wastewater feed mass flow rate; and Continuously Liquid flow meter installed at stripper... operating temperature Continuously (A) Liquid temperature monitoring device installed at stripper influent...

40 CFR Table 12 to Subpart G of... - Monitoring Requirements for Treatment Processes

Code of Federal Regulations, 2011 CFR

2011-07-01

... Appropriate methods as specified in § 63.143 and as approved by permitting authority. 2. Steam stripper (i... recorder. (ii) Wastewater feed mass flow rate; and Continuously Liquid flow meter installed at stripper... operating temperature Continuously (A) Liquid temperature monitoring device installed at stripper influent...

40 CFR Table 12 to Subpart G of... - Monitoring Requirements for Treatment Processes

Code of Federal Regulations, 2014 CFR

2014-07-01

... Appropriate methods as specified in § 63.143 and as approved by permitting authority. 2. Steam stripper (i... recorder. (ii) Wastewater feed mass flow rate; and Continuously Liquid flow meter installed at stripper... operating temperature Continuously (A) Liquid temperature monitoring device installed at stripper influent...

40 CFR Table 12 to Subpart G of... - Monitoring Requirements for Treatment Processes

Code of Federal Regulations, 2012 CFR

2012-07-01

... Appropriate methods as specified in § 63.143 and as approved by permitting authority. 2. Steam stripper (i... recorder. (ii) Wastewater feed mass flow rate; and Continuously Liquid flow meter installed at stripper... operating temperature Continuously (A) Liquid temperature monitoring device installed at stripper influent...

24 CFR 3286.413 - Recordkeeping.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 5 2011-04-01 2011-04-01 false Recordkeeping. 3286.413 Section 3286.413 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued... DEVELOPMENT MANUFACTURED HOME INSTALLATION PROGRAM Installer Responsibilities of Installation in HUD...

30 CFR 56.12047 - Guy wires.

Code of Federal Regulations, 2010 CFR

2010-07-01

... insulator protection of the National Electrical Safety Code, part 2, entitled “Safety Rules for the Installation and Maintenance of Electric Supply and Communication Lines” (also referred to as National Bureau... from the National Institute of Science and Technology, 100 Bureau Drive, Stop 3460, Gaithersburg, MD...

30 CFR 57.12047 - Guy wires.

Code of Federal Regulations, 2010 CFR

2010-07-01

... requirements for grounding or insulator protection of the National Electrical Safety Code, part 2, entitled “Safety Rules for the Installation and Maintenance of Electric Supply and Communication Lines” (also... documents may be obtained from the National Institute of Science and Technology, 100 Bureau Drive, Stop 3460...

29 CFR 1910.332 - Training.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Electrical Accident Occupation Blue collar supervisors. 1 Electrical and electronic engineers. 1 Electrical... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Electrical Safety-Related Work Practices § 1910.332 Training. (a... electric shock that is not reduced to a safe level by the electrical installation requirements of §§ 1910...

29 CFR 1910.332 - Training.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Electrical Accident Occupation Blue collar supervisors. 1 Electrical and electronic engineers. 1 Electrical... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Electrical Safety-Related Work Practices § 1910.332 Training. (a... electric shock that is not reduced to a safe level by the electrical installation requirements of §§ 1910...

29 CFR 1910.332 - Training.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Electrical Accident Occupation Blue collar supervisors. 1 Electrical and electronic engineers. 1 Electrical... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Electrical Safety-Related Work Practices § 1910.332 Training. (a... electric shock that is not reduced to a safe level by the electrical installation requirements of §§ 1910...

29 CFR 1910.332 - Training.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Electrical Accident Occupation Blue collar supervisors. 1 Electrical and electronic engineers. 1 Electrical... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Electrical Safety-Related Work Practices § 1910.332 Training. (a... electric shock that is not reduced to a safe level by the electrical installation requirements of §§ 1910...

29 CFR 1910.332 - Training.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Electrical Accident Occupation Blue collar supervisors. 1 Electrical and electronic engineers. 1 Electrical... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Electrical Safety-Related Work Practices § 1910.332 Training. (a... electric shock that is not reduced to a safe level by the electrical installation requirements of §§ 1910...

Summary of the Department of Transportation Rail-Highway Crossing Accident Prediction Formulas and Resource Model

DOT National Transportation Integrated Search

1982-09-01

The Highway Safety Acts of 1973 and 1976, and the Surface Transportation Assistance Act of 1978, provide funding authorizations to individual states to improve safety at public rail-highway crossings. The installation of active motorist warning devic...

24 CFR 232.605 - Contract requirements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... MORTGAGE INSURANCE FOR NURSING HOMES, INTERMEDIATE CARE FACILITIES, BOARD AND CARE HOMES, AND ASSISTED... Fire Safety Equipment Form of Contract § 232.605 Contract requirements. (a) The contract between the... contract. Either form of contract shall include the cost of fire safety equipment, its installation, and...

30 CFR 57.12047 - Guy wires.

Code of Federal Regulations, 2012 CFR

2012-07-01

... requirements for grounding or insulator protection of the National Electrical Safety Code, part 2, entitled “Safety Rules for the Installation and Maintenance of Electric Supply and Communication Lines” (also... documents may be obtained from the National Institute of Science and Technology, 100 Bureau Drive, Stop 3460...

30 CFR 57.12047 - Guy wires.

Code of Federal Regulations, 2013 CFR

2013-07-01

... requirements for grounding or insulator protection of the National Electrical Safety Code, part 2, entitled “Safety Rules for the Installation and Maintenance of Electric Supply and Communication Lines” (also... documents may be obtained from the National Institute of Science and Technology, 100 Bureau Drive, Stop 3460...

30 CFR 57.12047 - Guy wires.

Code of Federal Regulations, 2014 CFR

2014-07-01

... requirements for grounding or insulator protection of the National Electrical Safety Code, part 2, entitled “Safety Rules for the Installation and Maintenance of Electric Supply and Communication Lines” (also... documents may be obtained from the National Institute of Science and Technology, 100 Bureau Drive, Stop 3460...

Hazardous workplace review program in Taiwan.

PubMed

Chang, Yi-Kuo; Chuang, Kuen-Yuan; Tseng, Jo-Ming; Lin, Fang-Chen; Su, Teh-Sheng

2013-01-01

In Taiwan, relevant mid-term plans and projects of mitigating occupational hazards have been launched in recent years in the hopes of lowering the incidence of occupational hazards. In light of the lack of objective methodologies for researches on issues pertaining occupational safety and health, this research aims to explore the priorities of safety and health issues through focal groups, expert questionnaires and interviews on relevant issues such as hazard installations identified in R181 Prevention of Major Industrial Accidents Recommendation, 1993 proposed during the 18th World Congress on Safety and Health at work in Seoul 2008. Results revealed that distribute reports of major domestic/foreign occupational disasters to relevant sectors for the prevention of major accidents is needed, both from the importance and feasibility analysis. It is the only topic that scored over 4 points in average for expert and focal group consensus. Furthermore, the experts and focal groups came to consensus in the ranking of priority for 4 items, namely: 1) Installations containing/using large quantities of hazardous materials should be prioritized for inspection, 2) Incorporation of hazard installation review/inspection into OSH management system accreditation, 3) Impose operation shutdown as a means of penalty) and 4) Prioritize the promotion of preliminary PHA.

76 FR 45421 - Safety Zone; Houma Navigation Canal, From Waterway Mile Markers 19.0 to 20.0, Southwest of Bayou...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-29

..., loss or injury due to the installation of flood control structures/barriers. Vessels and tows transiting this zone transiting the specified water are required to proceed at slowest safe speed to minimize... Coast Guard and the contractually imposed timeline for the installation of flood control structures...

46 CFR 189.35-5 - Tests.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Tests. 189.35-5 Section 189.35-5 Shipping COAST GUARD... Weight Handling Gear § 189.35-5 Tests. (a) An installation load test and safety assessment shall be..., of the time and place of the installation tests when occurring in a port of the United States to...

46 CFR 189.35-5 - Tests.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Tests. 189.35-5 Section 189.35-5 Shipping COAST GUARD... Weight Handling Gear § 189.35-5 Tests. (a) An installation load test and safety assessment shall be..., of the time and place of the installation tests when occurring in a port of the United States to...

46 CFR 189.35-5 - Tests.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Tests. 189.35-5 Section 189.35-5 Shipping COAST GUARD... Weight Handling Gear § 189.35-5 Tests. (a) An installation load test and safety assessment shall be..., of the time and place of the installation tests when occurring in a port of the United States to...

46 CFR 189.35-5 - Tests.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Tests. 189.35-5 Section 189.35-5 Shipping COAST GUARD... Weight Handling Gear § 189.35-5 Tests. (a) An installation load test and safety assessment shall be..., of the time and place of the installation tests when occurring in a port of the United States to...

46 CFR 189.35-5 - Tests.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Tests. 189.35-5 Section 189.35-5 Shipping COAST GUARD... Weight Handling Gear § 189.35-5 Tests. (a) An installation load test and safety assessment shall be..., of the time and place of the installation tests when occurring in a port of the United States to...

30 CFR 250.108 - What requirements must I follow for cranes and other material-handling equipment?

Code of Federal Regulations, 2012 CFR

2012-07-01

... other material-handling equipment? 250.108 Section 250.108 Mineral Resources BUREAU OF SAFETY AND... material-handling equipment? (a) All cranes installed on fixed platforms must be operated in accordance... Cranes, API RP 2D (as incorporated by reference in § 250.198). (b) All cranes installed on fixed...

30 CFR 250.108 - What requirements must I follow for cranes and other material-handling equipment?

Code of Federal Regulations, 2014 CFR

2014-07-01

... other material-handling equipment? 250.108 Section 250.108 Mineral Resources BUREAU OF SAFETY AND... material-handling equipment? (a) All cranes installed on fixed platforms must be operated in accordance... Cranes, API RP 2D (as incorporated by reference in § 250.198). (b) All cranes installed on fixed...

30 CFR 250.108 - What requirements must I follow for cranes and other material-handling equipment?

Code of Federal Regulations, 2013 CFR

2013-07-01

... other material-handling equipment? 250.108 Section 250.108 Mineral Resources BUREAU OF SAFETY AND... material-handling equipment? (a) All cranes installed on fixed platforms must be operated in accordance... Cranes, API RP 2D (as incorporated by reference in § 250.198). (b) All cranes installed on fixed...

77 FR 33315 - Protection of Stratospheric Ozone: Alternative for the Motor Vehicle Air Conditioning Sector...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-06

... containers.\\14\\ \\14\\ The SAE J639 standard specifies unique fittings for high- side and low-side service... Safety and Health NODA--Announcement of Data Availability, formerly known as Notice of Data Availability.... Installation of a high pressure system warning label; Installation of a compressor cut-off switch; \\8\\ and \\8...

78 FR 35975 - Proposed Information Collection; Comment Request; Safety Standards for Underground Coal Mine...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-14

... To Ventilate Working Sections and Areas Where Mechanized Mining Equipment Is Being Installed or... Reduction Act of 1995, 44 U.S.C. 3506(c)(2)(A). This program helps to assure that requested data can be... area where mechanized mining equipment is being installed or removed, only under certain conditions...

The development of regulatory expectations for computer-based safety systems for the UK nuclear programme

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hughes, P. J.; Westwood, R.N; Mark, R. T.

2006-07-01

The Nuclear Installations Inspectorate (NII) of the UK's Health and Safety Executive (HSE) has completed a review of their Safety Assessment Principles (SAPs) for Nuclear Installations recently. During the period of the SAPs review in 2004-2005 the designers of future UK naval reactor plant were optioneering the control and protection systems that might be implemented. Because there was insufficient regulatory guidance available in the naval sector to support this activity the Defence Nuclear Safety Regulator (DNSR) invited the NII to collaborate with the production of a guidance document that provides clarity of regulatory expectations for the production of safety casesmore » for computer based safety systems. A key part of producing regulatory expectations was identifying the relevant extant standards and sector guidance that reflect good practice. The three principal sources of such good practice were: IAEA Safety Guide NS-G-1.1 (Software for Computer Based Systems Important to Safety in Nuclear Power Plants), European Commission consensus document (Common Position of European Nuclear Regulators for the Licensing of Safety Critical Software for Nuclear Reactors) and IEC nuclear sector standards such as IEC60880. A common understanding has been achieved between the NII and DNSR and regulatory guidance developed which will be used by both NII and DNSR in the assessment of computer-based safety systems and in the further development of more detailed joint technical assessment guidance for both regulatory organisations. (authors)« less

40 CFR 63.3168 - What are the requirements for continuous parameter monitoring system installation, operation, and...

Code of Federal Regulations, 2011 CFR

2011-07-01

... paragraphs (c)(1) through (3) of this section: (1) For a thermal oxidizer, install a gas temperature monitor... any substantial heat exchange occurs. (2) For a catalytic oxidizer, install a gas temperature monitor....3167(b)(1) through (3), you must also install a gas temperature monitor downstream of the catalyst bed...

40 CFR 63.3168 - What are the requirements for continuous parameter monitoring system installation, operation, and...

Code of Federal Regulations, 2010 CFR

2010-07-01

... paragraphs (c)(1) through (3) of this section: (1) For a thermal oxidizer, install a gas temperature monitor... any substantial heat exchange occurs. (2) For a catalytic oxidizer, install a gas temperature monitor....3167(b)(1) through (3), you must also install a gas temperature monitor downstream of the catalyst bed...

30 CFR 56.4500 - Heat sources.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Heat sources. 56.4500 Section 56.4500 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Installation/construction/maintenance § 56.4500 Heat sources. Heat sources capable of producing combustion...

30 CFR 57.4500 - Heat sources.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Heat sources. 57.4500 Section 57.4500 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Installation/construction/maintenance § 57.4500 Heat sources. Heat sources capable of producing combustion...

48 CFR 252.246-7003 - Notification of Potential Safety Issues.

Code of Federal Regulations, 2013 CFR

2013-10-01

.... Critical safety item means a part, subassembly, assembly, subsystem, installation equipment, or support... impact for systems, or subsystems, assemblies, subassemblies, or parts integral to a system, acquired by... the extent known at the time of notification; (iv) A point of contact to coordinate problem analysis...

48 CFR 252.246-7003 - Notification of Potential Safety Issues.

Code of Federal Regulations, 2010 CFR

2010-10-01

.... Critical safety item means a part, subassembly, assembly, subsystem, installation equipment, or support... impact for systems, or subsystems, assemblies, subassemblies, or parts integral to a system, acquired by... the extent known at the time of notification; (iv) A point of contact to coordinate problem analysis...

48 CFR 252.246-7003 - Notification of Potential Safety Issues.

Code of Federal Regulations, 2011 CFR

2011-10-01

.... Critical safety item means a part, subassembly, assembly, subsystem, installation equipment, or support... impact for systems, or subsystems, assemblies, subassemblies, or parts integral to a system, acquired by... the extent known at the time of notification; (iv) A point of contact to coordinate problem analysis...

48 CFR 252.246-7003 - Notification of Potential Safety Issues.

Code of Federal Regulations, 2012 CFR

2012-10-01

.... Critical safety item means a part, subassembly, assembly, subsystem, installation equipment, or support... impact for systems, or subsystems, assemblies, subassemblies, or parts integral to a system, acquired by... the extent known at the time of notification; (iv) A point of contact to coordinate problem analysis...

48 CFR 252.246-7003 - Notification of Potential Safety Issues.

Code of Federal Regulations, 2014 CFR

2014-10-01

.... Critical safety item means a part, subassembly, assembly, subsystem, installation equipment, or support... impact for systems, or subsystems, assemblies, subassemblies, or parts integral to a system, acquired by... the extent known at the time of notification; (iv) A point of contact to coordinate problem analysis...

30 CFR 57.4500 - Heat sources.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Heat sources. 57.4500 Section 57.4500 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Installation/construction/maintenance § 57.4500 Heat sources. Heat sources capable of producing combustion...

30 CFR 57.4500 - Heat sources.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Heat sources. 57.4500 Section 57.4500 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Installation/construction/maintenance § 57.4500 Heat sources. Heat sources capable of producing combustion...

30 CFR 56.4500 - Heat sources.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Heat sources. 56.4500 Section 56.4500 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Installation/construction/maintenance § 56.4500 Heat sources. Heat sources capable of producing combustion...

30 CFR 56.4500 - Heat sources.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Heat sources. 56.4500 Section 56.4500 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Installation/construction/maintenance § 56.4500 Heat sources. Heat sources capable of producing combustion...

30 CFR 57.4500 - Heat sources.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Heat sources. 57.4500 Section 57.4500 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Installation/construction/maintenance § 57.4500 Heat sources. Heat sources capable of producing combustion...

30 CFR 56.4500 - Heat sources.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Heat sources. 56.4500 Section 56.4500 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Installation/construction/maintenance § 56.4500 Heat sources. Heat sources capable of producing combustion...

30 CFR 57.9308 - Switch throws.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Switch throws. 57.9308 Section 57.9308 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND....9308 Switch throws. Switch throws shall be installed to provide clearance to protect switchmen from...

30 CFR 57.9308 - Switch throws.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Switch throws. 57.9308 Section 57.9308 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND....9308 Switch throws. Switch throws shall be installed to provide clearance to protect switchmen from...

30 CFR 56.9308 - Switch throws.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Switch throws. 56.9308 Section 56.9308 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Switch throws. Switch throws shall be installed to provide clearance to protect switchmen from contact...

30 CFR 57.9308 - Switch throws.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Switch throws. 57.9308 Section 57.9308 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND....9308 Switch throws. Switch throws shall be installed to provide clearance to protect switchmen from...

30 CFR 57.9308 - Switch throws.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Switch throws. 57.9308 Section 57.9308 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND....9308 Switch throws. Switch throws shall be installed to provide clearance to protect switchmen from...

30 CFR 56.9308 - Switch throws.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Switch throws. 56.9308 Section 56.9308 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Switch throws. Switch throws shall be installed to provide clearance to protect switchmen from contact...

30 CFR 56.9308 - Switch throws.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Switch throws. 56.9308 Section 56.9308 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Switch throws. Switch throws shall be installed to provide clearance to protect switchmen from contact...

30 CFR 56.9308 - Switch throws.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Switch throws. 56.9308 Section 56.9308 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Switch throws. Switch throws shall be installed to provide clearance to protect switchmen from contact...

30 CFR 56.9308 - Switch throws.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Switch throws. 56.9308 Section 56.9308 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Switch throws. Switch throws shall be installed to provide clearance to protect switchmen from contact...

30 CFR 56.9309 - Chute design.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Chute design. 56.9309 Section 56.9309 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... design. Chute-loading installations shall be designed to provide a safe location for persons pulling...

30 CFR 56.9309 - Chute design.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Chute design. 56.9309 Section 56.9309 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... design. Chute-loading installations shall be designed to provide a safe location for persons pulling...

Carpentry and Finishing Procedures. Building Maintenance. Module II. Instructor's Guide.

ERIC Educational Resources Information Center

Hawk, Sam; Brunk, Art

This curriculum guide, keyed to the building maintenance competency profile developed by industry and education professionals, provides three units on carpentry and finishing procedures. The first unit, Exterior Carpentry, contains the following lessons: carpentry safety procedures, ladder and scaffolding safety, door installation/repair,…

Evaluating the potential safety benefits of electronic hours-of-service recorders final report.

DOT National Transportation Integrated Search

2014-04-01

The purpose of the current study was to assess the benefits of installed electronic hours-of-service recorders : (EHSRs) on safety and hours-of-service (HOS) violations related to Class 7 and 8 trucks as they operated during : normal revenue service....

24 CFR 232.620 - Determination of compliance by HHS.

Code of Federal Regulations, 2011 CFR

2011-04-01

... AUTHORITIES MORTGAGE INSURANCE FOR NURSING HOMES, INTERMEDIATE CARE FACILITIES, BOARD AND CARE HOMES, AND... of Fire Safety Equipment Special Requirements § 232.620 Determination of compliance by HHS. An... the fire safety equipment has been installed, will be in compliance with the HHS requirements for fire...

24 CFR 232.630 - Assurance of completion.

Code of Federal Regulations, 2011 CFR

2011-04-01

... MORTGAGE INSURANCE FOR NURSING HOMES, INTERMEDIATE CARE FACILITIES, BOARD AND CARE HOMES, AND ASSISTED... Fire Safety Equipment Special Requirements § 232.630 Assurance of completion. If the property upon which the fire safety equipment is to be installed is subject to a mortgage insured or held by the...

[Radiation safety of exploitation of radiation sources at the civil aviation airlines].

PubMed

Afanas'ev, R V; Zuev, V G; Berezin, G I; Sereda, V N; Zasiad'ko, A K

2004-01-01

Radiation risks from isotope-containing equipment, and ionizing and unused X-ray radiation sources are characterized and relevant normative documents with safety requirements to radiation sources installation, radiation safety of aircraft servicing and repair, hand luggage control and heavy luggage registration, personal protection items, system of radiation monitoring at airlines and aircraft works, and liability for breach of performance guidelines are cited.

Vehicle characteristics associated with LATCH use and correct use in real-world child restraint installations.

PubMed

Cicchino, Jessica B; Jermakian, Jessica S

2015-06-01

The objective of this study was to determine if vehicle features associated with LATCH ease-of-use in laboratory studies with volunteers predict LATCH use and misuse in real-world child restraint installations. Vehicle characteristics were extracted from prior surveys of more than 100 top-selling 2010-13 vehicles. Use and correct use of LATCH was determined from records of more than 14,000 child restraint installations in these vehicles that were inspected by child passenger safety technicians at Safe Kids car seat checkup events during 2010-12. Logistic regression was used to examine the association between vehicle features and use and correct use of lower anchors and top tethers, controlling for other relevant installation features. Lower anchors were more likely to be used and correctly used when the clearance angle around them was greater than 54°, the force required to attach them to the lower anchors was less than 178N, and their depth within the seat bight was less than 4cm. Restraints were more likely to be attached correctly when installed with the lower anchors than with the seat belt. After controlling for lower anchor use and other installation features, the likelihood of tether use and correct use in installations of forward-facing restraints was significantly higher when there was no hardware present that could potentially be confused with the tether anchor or when the tether anchor was located on the rear deck, which is typical in sedans. There is converging evidence from laboratory studies with volunteers and real-world child restraint installations that vehicle features are associated with correct LATCH use. Vehicle designs that improve the ease of installing child restraints with LATCH could improve LATCH use rates and reduce child restraint misuse. Copyright © 2015 Elsevier Ltd and National Safety Council. All rights reserved.

Can fire safety in hotels be improved? Results from the survey of a panel of experts in Spain.

PubMed

Rubio-Romero, Juan Carlos; Márquez-Sierra, Francisco; Suárez-Cebador, Manuel

2016-06-08

The hotel industry is an important driver of the European labour market with over 250,000 hotels employing some 2 million people. In Spain, 240 workers were injured by fires in hotels from 2004 to 2008. Fire is considered to be the most important risk in the hotel industry, but the lack of an EU-wide data recording system for hotels makes it difficult to give exact figures for fire events. We analysed the state of fire prevention systems in hotels in Spain with the aim of proposing strategies to improve fire safety. A 10-item questionnaire was administered from 2007 to 2009 to 15 Spanish experts in fire safety. The questions were measured using a Likert scale and classified into 4 sections: current state of installations, influence of establishment characteristics, application of regulations and priority ranking of actions. Descriptive statistics summarized the data and t-tests evaluated the agreement foreach statement in the questionnaire. The statistical analysis showed homogeneity in the responses by the experts in all four categories: current state of fire safety installations, influence of establishment characteristics, application of regulations, and priority of actions. There was consensus among the experts over the necessity to improve the enforcement of regulations and also regarding the existence of an association between the hotel category (in Spain they are ranked using a 1 to 5 "star" rating system) and the level of fire safety; hotels with a higher category had higher levels of safety. There is a need to identify ways to apply fire safety standards to older hotels so that they comply with new regulations, to standardize regulations for different regions and countries, to improve the maintenance of installations and equipment, to increase the effectiveness of inspections conducted by government bodies, and to raise the general awareness of stakeholders involved in hotel fire prevention.

Navigational and vessel inspection circular No. 5-86. Voluntary standards for US uninspected commercial fishing vessels. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1986-08-18

The vessel standards program, which this NVIC addresses, originally consisted of a series of five NVICs; Stability (5-85), Radio and Shipboard Navigation Equipment (6-85), Fire Safety Measures (7-85), Lifesaving Equipment and Protection of the Crew (8-85), and Hull, Machinery, and Electrical Installations (9-85). Many of these NVICs contained specific operational and educational material for fishermen which could be used before the `Vessel Safety Manual` was published; therefore, some material previously contained in any one of the NVICs has been moved to the manual, although some overlap still exists. Since input from the fishing industry and other interested parties was essential,more » the authors published NVICs 5-85 thru 9-85 as proposed standards and distributed them to over 230 individuals, groups and organizations throuoghout the U.S. who have an interest in fishing vessel safety. These groups included safety consultants, marine surveyors, naval architects, insurance underwriters, fishing vessel owners` associations, boat builders, fisheries unions, personnel associated with the National Oceanic and Atmospheric Administration Sea Grant program, and the National Marine Fisheries Service. Several sent detailed comments; all expressed a favorable reaction to the standards. This report is a consolidation of NVICs 5-85 thru 9-85 taking into account the comments and recommendations received. For continuity, certain regulatory requirements (although not voluntary) have been included where appropriate.« less

40 CFR 63.8600 - What are my monitoring installation, operation, and maintenance requirements?

Code of Federal Regulations, 2010 CFR

2010-07-01

... continuity, and all mechanical connections for leakage. (d) For each pH measurement device, you must meet the... integrity and all electrical connections for continuity. (e) For each bag leak detection system, you must... leak detection system must be installed, calibrated, operated, and maintained according to the “Fabric...

Implementation project : strengthening a continuous steel girder bridge in Lakeport, Texas with post-installed shear connectors : Phase 1 : bridge strengthening design and load testing.

DOT National Transportation Integrated Search

2017-03-01

In Implementation Project 5-6719, a non-composite continuous steel girder bridge located in Lakeport, Texas will be strengthened using techniques developed in TxDOT Research Project 0-6719. This strengthening technique involves the use of post-instal...

40 CFR 60.2730 - What monitoring equipment must I install and what parameters must I monitor?

Code of Federal Regulations, 2014 CFR

2014-07-01

... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY... Units Model Rule-Monitoring § 60.2730 What monitoring equipment must I install and what parameters must...) of this section must be expressed in milligrams per dry standard cubic meter corrected to 7 percent...

40 CFR 60.2730 - What monitoring equipment must I install and what parameters must I monitor?

Code of Federal Regulations, 2013 CFR

2013-07-01

... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY... Units Model Rule-Monitoring § 60.2730 What monitoring equipment must I install and what parameters must...) of this section must be expressed in milligrams per dry standard cubic meter corrected to 7 percent...

40 CFR 265.442 - Design and installation of new drip pads.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 26 2011-07-01 2011-07-01 false Design and installation of new drip pads. 265.442 Section 265.442 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) INTERIM STATUS STANDARDS FOR OWNERS AND OPERATORS OF HAZARDOUS WASTE TREATMENT, STORAGE, AND DISPOSAL FACILITIES Drip Pads §...

40 CFR 63.5855 - What are my monitor installation and operation requirements?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 12 2011-07-01 2009-07-01 true What are my monitor installation and operation requirements? 63.5855 Section 63.5855 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emissions Standards...

40 CFR 63.5855 - What are my monitor installation and operation requirements?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 12 2010-07-01 2010-07-01 true What are my monitor installation and operation requirements? 63.5855 Section 63.5855 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emissions Standards...

40 CFR 62.15175 - What continuous emission monitoring systems must I install for gaseous pollutants?

Code of Federal Regulations, 2010 CFR

2010-07-01

..., maintain, and operate continuous emission monitoring systems for oxygen (or carbon dioxide), sulfur dioxide, and carbon monoxide. If you operate a Class I municipal waste combustion unit, also install, calibrate... emission monitoring system for sulfur dioxide, nitrogen oxides, and oxygen (or carbon dioxide) at the...

40 CFR 60.1720 - What continuous emission monitoring systems must I install for gaseous pollutants?

Code of Federal Regulations, 2011 CFR

2011-07-01

..., maintain, and operate continuous emission monitoring systems for oxygen (or carbon dioxide), sulfur dioxide, and carbon monoxide. If you operate a Class I municipal waste combustion unit, also install, calibrate... emission monitoring systems for sulfur dioxide, nitrogen oxides, and oxygen (or carbon dioxide) at the...

40 CFR 60.1720 - What continuous emission monitoring systems must I install for gaseous pollutants?

Code of Federal Regulations, 2010 CFR

2010-07-01

..., maintain, and operate continuous emission monitoring systems for oxygen (or carbon dioxide), sulfur dioxide, and carbon monoxide. If you operate a Class I municipal waste combustion unit, also install, calibrate... emission monitoring systems for sulfur dioxide, nitrogen oxides, and oxygen (or carbon dioxide) at the...

40 CFR 62.15175 - What continuous emission monitoring systems must I install for gaseous pollutants?

Code of Federal Regulations, 2011 CFR

2011-07-01

..., maintain, and operate continuous emission monitoring systems for oxygen (or carbon dioxide), sulfur dioxide, and carbon monoxide. If you operate a Class I municipal waste combustion unit, also install, calibrate... emission monitoring system for sulfur dioxide, nitrogen oxides, and oxygen (or carbon dioxide) at the...