Advanced communications technology satellite high burst rate link evaluation terminal power control and rain fade software test plan, version 1.0

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.

1993-01-01

The Power Control and Rain Fade Software was developed at the NASA Lewis Research Center to support the Advanced Communications Technology Satellite High Burst Rate Link Evaluation Terminal (ACTS HBR-LET). The HBR-LET is an experimenters terminal to communicate with the ACTS for various experiments by government, university, and industry agencies. The Power Control and Rain Fade Software is one segment of the Control and Performance Monitor (C&PM) Software system of the HBR-LET. The Power Control and Rain Fade Software automatically controls the LET uplink power to compensate for signal fades. Besides power augmentation, the C&PM Software system is also responsible for instrument control during HBR-LET experiments, control of the Intermediate Frequency Switch Matrix on board the ACTS to yield a desired path through the spacecraft payload, and data display. The Power Control and Rain Fade Software User's Guide, Version 1.0 outlines the commands and procedures to install and operate the Power Control and Rain Fade Software. The Power Control and Rain Fade Software Maintenance Manual, Version 1.0 is a programmer's guide to the Power Control and Rain Fade Software. This manual details the current implementation of the software from a technical perspective. Included is an overview of the Power Control and Rain Fade Software, computer algorithms, format representations, and computer hardware configuration. The Power Control and Rain Fade Test Plan provides a step-by-step procedure to verify the operation of the software using a predetermined signal fade event. The Test Plan also provides a means to demonstrate the capability of the software.

Advanced communications technology satellite high burst rate link evaluation terminal communication protocol software user's guide, version 1.0

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.

1993-01-01

The Communication Protocol Software was developed at the NASA Lewis Research Center to support the Advanced Communications Technology Satellite High Burst Rate Link Evaluation Terminal (ACTS HBR-LET). The HBR-LET is an experimenters terminal to communicate with the ACTS for various experiments by government, university, and industry agencies. The Communication Protocol Software is one segment of the Control and Performance Monitor (C&PM) Software system of the HBR-LET. The Communication Protocol Software allows users to control and configure the Intermediate Frequency Switch Matrix (IFSM) on board the ACTS to yield a desired path through the spacecraft payload. Besides IFSM control, the C&PM Software System is also responsible for instrument control during HBR-LET experiments, uplink power control of the HBR-LET to demonstrate power augmentation during signal fade events, and data display. The Communication Protocol Software User's Guide, Version 1.0 (NASA CR-189162) outlines the commands and procedures to install and operate the Communication Protocol Software. Configuration files used to control the IFSM, operator commands, and error recovery procedures are discussed. The Communication Protocol Software Maintenance Manual, Version 1.0 (NASA CR-189163, to be published) is a programmer's guide to the Communication Protocol Software. This manual details the current implementation of the software from a technical perspective. Included is an overview of the Communication Protocol Software, computer algorithms, format representations, and computer hardware configuration. The Communication Protocol Software Test Plan (NASA CR-189164, to be published) provides a step-by-step procedure to verify the operation of the software. Included in the Test Plan is command transmission, telemetry reception, error detection, and error recovery procedures.

Detailed design and first tests of the application software for the instrument control unit of Euclid-NISP

NASA Astrophysics Data System (ADS)

Ligori, S.; Corcione, L.; Capobianco, V.; Bonino, D.; Sirri, G.; Fornari, F.; Giacomini, F.; Patrizii, L.; Valenziano, L.; Travaglini, R.; Colodro, C.; Bortoletto, F.; Bonoli, C.; Chiarusi, T.; Margiotta, A.; Mauri, N.; Pasqualini, L.; Spurio, M.; Tenti, M.; Dal Corso, F.; Dusini, S.; Laudisio, F.; Sirignano, C.; Stanco, L.; Ventura, S.; Auricchio, N.; Balestra, A.; Franceschi, E.; Morgante, G.; Trifoglio, M.; Medinaceli, E.; Guizzo, G. P.; Debei, S.; Stephen, J. B.

2016-07-01

In this paper we describe the detailed design of the application software (ASW) of the instrument control unit (ICU) of NISP, the Near-Infrared Spectro-Photometer of the Euclid mission. This software is based on a real-time operating system (RTEMS) and will interface with all the subunits of NISP, as well as the command and data management unit (CDMU) of the spacecraft for telecommand and housekeeping management. We briefly review the main requirements driving the design and the architecture of the software that is approaching the Critical Design Review level. The interaction with the data processing unit (DPU), which is the intelligent subunit controlling the detector system, is described in detail, as well as the concept for the implementation of the failure detection, isolation and recovery (FDIR) algorithms. The first version of the software is under development on a Breadboard model produced by AIRBUS/CRISA. We describe the results of the tests and the main performances and budgets.

Description of the GMAO OSSE for Weather Analysis Software Package: Version 3

NASA Technical Reports Server (NTRS)

Koster, Randal D. (Editor); Errico, Ronald M.; Prive, Nikki C.; Carvalho, David; Sienkiewicz, Meta; El Akkraoui, Amal; Guo, Jing; Todling, Ricardo; McCarty, Will; Putman, William M.;

SAO mission support software and data standards, version 1.0

NASA Technical Reports Server (NTRS)

Hsieh, P.

1993-01-01

This document defines the software developed by the SAO AXAF Mission Support (MS) Program and defines standards for the software development process and control of data products generated by the software. The SAO MS is tasked to develop and use software to perform a variety of functions in support of the AXAF mission. Software is developed by software engineers and scientists, and commercial off-the-shelf (COTS) software is used either directly or customized through the use of scripts to implement analysis procedures. Software controls real-time laboratory instruments, performs data archiving, displays data, and generates model predictions. Much software is used in the analysis of data to generate data products that are required by the AXAF project, for example, on-orbit mirror performance predictions or detailed characterization of the mirror reflection performance with energy.

QRev—Software for computation and quality assurance of acoustic doppler current profiler moving-boat streamflow measurements—User’s manual for version 2.8

USGS Publications Warehouse

Mueller, David S.

2016-05-12

The software program, QRev computes the discharge from moving-boat acoustic Doppler current profiler measurements using data collected with any of the Teledyne RD Instrument or SonTek bottom tracking acoustic Doppler current profilers. The computation of discharge is independent of the manufacturer of the acoustic Doppler current profiler because QRev applies consistent algorithms independent of the data source. In addition, QRev automates filtering and quality checking of the collected data and provides feedback to the user of potential quality issues with the measurement. Various statistics and characteristics of the measurement, in addition to a simple uncertainty assessment are provided to the user to assist them in properly rating the measurement. QRev saves an extensible markup language file that can be imported into databases or electronic field notes software. The user interacts with QRev through a tablet-friendly graphical user interface. This report is the manual for version 2.8 of QRev.

Music Engineering as a Novel Strategy for Enhancing Music Enjoyment in the Cochlear Implant Recipient.

PubMed

Kohlberg, Gavriel D; Mancuso, Dean M; Chari, Divya A; Lalwani, Anil K

2015-01-01

Enjoyment of music remains an elusive goal following cochlear implantation. We test the hypothesis that reengineering music to reduce its complexity can enhance the listening experience for the cochlear implant (CI) listener. Normal hearing (NH) adults (N = 16) and CI listeners (N = 9) evaluated a piece of country music on three enjoyment modalities: pleasantness, musicality, and naturalness. Participants listened to the original version along with 20 modified, less complex, versions created by including subsets of the musical instruments from the original song. NH participants listened to the segments both with and without CI simulation processing. Compared to the original song, modified versions containing only 1-3 instruments were less enjoyable to the NH listeners but more enjoyable to the CI listeners and the NH listeners with CI simulation. Excluding vocals and including rhythmic instruments improved enjoyment for NH listeners with CI simulation but made no difference for CI listeners. Reengineering a piece of music to reduce its complexity has the potential to enhance music enjoyment for the cochlear implantee. Thus, in addition to improvements in software and hardware, engineering music specifically for the CI listener may be an alternative means to enhance their listening experience.

SOFIA tracking image simulation

NASA Astrophysics Data System (ADS)

Taylor, Charles R.; Gross, Michael A. K.

2016-09-01

The Stratospheric Observatory for Infrared Astronomy (SOFIA) tracking camera simulator is a component of the Telescope Assembly Simulator (TASim). TASim is a software simulation of the telescope optics, mounting, and control software. Currently in its fifth major version, TASim is relied upon for telescope operator training, mission planning and rehearsal, and mission control and science instrument software development and testing. TASim has recently been extended for hardware-in-the-loop operation in support of telescope and camera hardware development and control and tracking software improvements. All three SOFIA optical tracking cameras are simulated, including the Focal Plane Imager (FPI), which has recently been upgraded to the status of a science instrument that can be used on its own or in parallel with one of the seven infrared science instruments. The simulation includes tracking camera image simulation of starfields based on the UCAC4 catalog at real-time rates of 4-20 frames per second. For its role in training and planning, it is important for the tracker image simulation to provide images with a realistic appearance and response to changes in operating parameters. For its role in tracker software improvements, it is vital to have realistic signal and noise levels and precise star positions. The design of the software simulation for precise subpixel starfield rendering (including radial distortion), realistic point-spread function as a function of focus, tilt, and collimation, and streaking due to telescope motion will be described. The calibration of the simulation for light sensitivity, dark and bias signal, and noise will also be presented

mMass 3: a cross-platform software environment for precise analysis of mass spectrometric data.

PubMed

Strohalm, Martin; Kavan, Daniel; Novák, Petr; Volný, Michael; Havlícek, Vladimír

2010-06-01

While tools for the automated analysis of MS and LC-MS/MS data are continuously improving, it is still often the case that at the end of an experiment, the mass spectrometrist will spend time carefully examining individual spectra. Current software support is mostly provided only by the instrument vendors, and the available software tools are often instrument-dependent. Here we present a new generation of mMass, a cross-platform environment for the precise analysis of individual mass spectra. The software covers a wide range of processing tasks such as import from various data formats, smoothing, baseline correction, peak picking, deisotoping, charge determination, and recalibration. Functions presented in the earlier versions such as in silico digestion and fragmentation were redesigned and improved. In addition to Mascot, an interface for ProFound has been implemented. A specific tool is available for isotopic pattern modeling to enable precise data validation. The largest available lipid database (from the LIPID MAPS Consortium) has been incorporated and together with the new compound search tool lipids can be rapidly identified. In addition, the user can define custom libraries of compounds and use them analogously. The new version of mMass is based on a stand-alone Python library, which provides the basic functionality for data processing and interpretation. This library can serve as a good starting point for other developers in their projects. Binary distributions of mMass, its source code, a detailed user's guide, and video tutorials are freely available from www.mmass.org .

Laser light scattering instrument advanced technology development

NASA Technical Reports Server (NTRS)

Wallace, J. F.

1993-01-01

The objective of this advanced technology development (ATD) project has been to provide sturdy, miniaturized laser light scattering (LLS) instrumentation for use in microgravity experiments. To do this, we assessed user requirements, explored the capabilities of existing and prospective laser light scattering hardware, and both coordinated and participated in the hardware and software advances needed for a flight hardware instrument. We have successfully breadboarded and evaluated an engineering version of a single-angle glove-box instrument which uses solid state detectors and lasers, along with fiber optics, for beam delivery and detection. Additionally, we have provided the specifications and written verification procedures necessary for procuring a miniature multi-angle LLS instrument which will be used by the flight hardware project which resulted from this work and from this project's interaction with the laser light scattering community.

New features in McStas, version 1.5

NASA Astrophysics Data System (ADS)

Åstrand, P.-O.; Lefmann, K.; Farhi, E.; Nielsen, K.; Skårup, P.

The neutron ray-tracing simulation package McStas has attracted numerous users, and the development of the package continues with version 1.5 released at the ICNS 2001 conference. New features include: support for neutron polarisation, labelling of neutrons, realistic source and sample components, and interface to the Riso instrument-control software TASCOM. We give a general introduction to McStas and present the latest developments. In particular, we give an example of how the neutron-label option has been used to locate the origin of a spurious side-peak, observed in an experiment with RITA-1 at Riso.

New Software Architecture Options for the TCL Data Acquisition System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Valenton, Emmanuel

2014-09-01

The Turbulent Combustion Laboratory (TCL) conducts research on combustion in turbulent flow environments. To conduct this research, the TCL utilizes several pulse lasers, a traversable wind tunnel, flow controllers, scientific grade CCD cameras, and numerous other components. Responsible for managing these different data-acquiring instruments and data processing components is the Data Acquisition (DAQ) software. However, the current system is constrained to running through VXI hardware—an instrument-computer interface—that is several years old, requiring the use of an outdated version of the visual programming language, LabVIEW. A new Acquisition System is being programmed which will borrow heavily from either a programming modelmore » known as the Current Value Table (CVT) System or another model known as the Server-Client System. The CVT System model is in essence, a giant spread sheet from which data or commands may be retrieved or written to, and the Server-Client System is based on network connections between a server and a client, very much like the Server-Client model of the Internet. Currently, the bare elements of a CVT DAQ Software have been implemented, consisting of client programs in addition to a server program that the CVT will run on. This system is being rigorously tested to evaluate the merits of pursuing the CVT System model and to uncover any potential flaws which may result in further implementation. If the CVT System is chosen, which is likely, then future work will consist of build up the system until enough client programs have been created to run the individual components of the lab. The advantages of such a System will be flexibility, portability, and polymorphism. Additionally, the new DAQ software will allow the Lab to replace the VXI with a newer instrument interface—the PXI—and take advantage of the capabilities of current and future versions of LabVIEW.« less

STATUS OF VARIOUS SNS DIAGNOSTIC SYSTEMS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blokland, Willem; Purcell, J David; Patton, Jeff

2007-01-01

The Spallation Neutron Source (SNS) accelerator systems are ramping up to deliver a 1.0 GeV, 1.4 MW proton beam to a liquid mercury target for neutron scattering research. Enhancements or additions have been made to several instrument systems to support the ramp up in intensity, improve reliability, and/or add functionality. The Beam Current Monitors now support increased rep rates, the Harp system now includes charge density calculations for the target, and a new system has been created to collect data for the beam accounting and present the data over the web and to the operator consoles. The majority of themore » SNS beam instruments are PC-based and their configuration files are now managed through the Oracle relational database. A new version for the wire scanner software was developed to add features to correlate the scan with beam loss, parking in the beam, and measuring the longitudinal beam current. This software is currently being tested. This paper also includes data from the selected instruments.« less

Sample Analysis at Mars Instrument Simulator

NASA Technical Reports Server (NTRS)

Benna, Mehdi; Nolan, Tom

2013-01-01

The Sample Analysis at Mars Instrument Simulator (SAMSIM) is a numerical model dedicated to plan and validate operations of the Sample Analysis at Mars (SAM) instrument on the surface of Mars. The SAM instrument suite, currently operating on the Mars Science Laboratory (MSL), is an analytical laboratory designed to investigate the chemical and isotopic composition of the atmosphere and volatiles extracted from solid samples. SAMSIM was developed using Matlab and Simulink libraries of MathWorks Inc. to provide MSL mission planners with accurate predictions of the instrument electrical, thermal, mechanical, and fluid responses to scripted commands. This tool is a first example of a multi-purpose, full-scale numerical modeling of a flight instrument with the purpose of supplementing or even eliminating entirely the need for a hardware engineer model during instrument development and operation. SAMSIM simulates the complex interactions that occur between the instrument Command and Data Handling unit (C&DH) and all subsystems during the execution of experiment sequences. A typical SAM experiment takes many hours to complete and involves hundreds of components. During the simulation, the electrical, mechanical, thermal, and gas dynamics states of each hardware component are accurately modeled and propagated within the simulation environment at faster than real time. This allows the simulation, in just a few minutes, of experiment sequences that takes many hours to execute on the real instrument. The SAMSIM model is divided into five distinct but interacting modules: software, mechanical, thermal, gas flow, and electrical modules. The software module simulates the instrument C&DH by executing a customized version of the instrument flight software in a Matlab environment. The inputs and outputs to this synthetic C&DH are mapped to virtual sensors and command lines that mimic in their structure and connectivity the layout of the instrument harnesses. This module executes, and thus validates, complex command scripts prior to their up-linking to the SAM instrument. As an output, this module generates synthetic data and message logs at a rate that is similar to the actual instrument.

STIS Data Handbook v. 6.0

NASA Astrophysics Data System (ADS)

Bostroem, K. A.; Proffitt, C.

2011-05-01

This handbook describes data from the Space Telescope Imaging Spectrograph (STIS) onboard the Hubble Space Telescope (HST), and how to manipulate, calibrate, and analyze those data. The current version of the STIS Data Handbook is presented as an independent and self-contained document, extensively built on the contents of version 6 of the HST Data Handbook. Users are referred to a companion volume, Introduction to the HST Data Handbooks, for more general information about the details of acquiring data from the HST archive, HST file formats, and general purpose software for displaying and processing HST data. For detailed information on the capabilities of the instrument, and how to plan observations, users should refer to the STIS Instrument Handbook. For further information and timely updates, users should consult the STIS Web page (http://www.stsci.edu/hst/stis), especially the Document Archive link. In particular, the STScI Analysis Newsletters (STANs) highlight changes in code and calibration procedures and provide other instrument-related news. The Instrument Science Reports (ISRs) present in-depth characterizations of the instrument and detailed explanations of calibration code and procedures. The current edition of the STIS Data Handbook was completed in early-2011. The last major revision was published in January 2002, following the failure of the Side-1 electronics and the successful resumption of operations using Side-2 electronics in the summer of 2001. STIS continued to perform well until the Side-2 electronics failed on 3 August 2004. STIS was successfully repaired during the fourth HST servicing mission (SM4) in May 2009 and has resumed science operations with all channels. A static archive of all STIS data taken prior to the Side-2 failure was prepared in 2006 using the latest calibration code and reference files, and has now replaced On-the-Fly Reprocessing (OTFR) of STIS data. At that time, substantial improvements were made to calibration and pipeline codes and reference files (see Section 1.5). New STIS data taken after the 2009 repair will be processed through OTFR when requested from the HST archive. This will allow the data to be calibrated with the most up-to-date versions of the software and reference files.

Means of storage and automated monitoring of versions of text technical documentation

NASA Astrophysics Data System (ADS)

Leonovets, S. A.; Shukalov, A. V.; Zharinov, I. O.

2018-03-01

The paper presents automation of the process of preparation, storage and monitoring of version control of a text designer, and program documentation by means of the specialized software is considered. Automation of preparation of documentation is based on processing of the engineering data which are contained in the specifications and technical documentation or in the specification. Data handling assumes existence of strictly structured electronic documents prepared in widespread formats according to templates on the basis of industry standards and generation by an automated method of the program or designer text document. Further life cycle of the document and engineering data entering it are controlled. At each stage of life cycle, archive data storage is carried out. Studies of high-speed performance of use of different widespread document formats in case of automated monitoring and storage are given. The new developed software and the work benches available to the developer of the instrumental equipment are described.

SiFAP: a Simple Sub-Millisecond Astronomical Photometer

NASA Astrophysics Data System (ADS)

Ambrosino, F.; Meddi, F.; Nesci, R.; Rossi, C.; Sclavi, S.; Bruni, I.

2013-09-01

A new fast photometer based on SiPM technology was developed at the University of Rome "La Sapienza" starting from 2009. A first prototype was successfully tested observing the Crab pulsar at the Loiano telescope of the Bologna Observatory. In this paper we illustrate the improvements we applied to our instrument, concerning new cooled commercial sensors, a new version of our custom dedicated electronics and an upgraded control timing software. Finally we report the results obtained with this instrument on December 2012 on the Crab pulsar at the Loiano telescope to show its goodness and capabilities.

Music Engineering as a Novel Strategy for Enhancing Music Enjoyment in the Cochlear Implant Recipient

PubMed Central

Kohlberg, Gavriel D.; Mancuso, Dean M.; Chari, Divya A.; Lalwani, Anil K.

2015-01-01

Objective. Enjoyment of music remains an elusive goal following cochlear implantation. We test the hypothesis that reengineering music to reduce its complexity can enhance the listening experience for the cochlear implant (CI) listener. Methods. Normal hearing (NH) adults (N = 16) and CI listeners (N = 9) evaluated a piece of country music on three enjoyment modalities: pleasantness, musicality, and naturalness. Participants listened to the original version along with 20 modified, less complex, versions created by including subsets of the musical instruments from the original song. NH participants listened to the segments both with and without CI simulation processing. Results. Compared to the original song, modified versions containing only 1–3 instruments were less enjoyable to the NH listeners but more enjoyable to the CI listeners and the NH listeners with CI simulation. Excluding vocals and including rhythmic instruments improved enjoyment for NH listeners with CI simulation but made no difference for CI listeners. Conclusions. Reengineering a piece of music to reduce its complexity has the potential to enhance music enjoyment for the cochlear implantee. Thus, in addition to improvements in software and hardware, engineering music specifically for the CI listener may be an alternative means to enhance their listening experience. PMID:26543322

Janus: Graphical Software for Analyzing In-Situ Measurements of Solar-Wind Ions

NASA Astrophysics Data System (ADS)

Maruca, B.; Stevens, M. L.; Kasper, J. C.; Korreck, K. E.

2016-12-01

In-situ observations of solar-wind ions provide tremendous insights into the physics of space plasmas. Instrument on spacecraft measure distributions of ion energies, which can be processed into scientifically useful data (e.g., values for ion densities and temperatures). This analysis requires a strong, technical understanding of the instrument, so it has traditionally been carried out by the instrument teams using automated software that they had developed for that purpose. The automated routines are optimized for typical solar-wind conditions, so they can fail to capture the complex (and scientifically interesting) microphysics of transient solar-wind - such as coronal mass ejections (CME's) and co-rotating interaction regions (CIR's) - which are often better analyzed manually.This presentation reports on the ongoing development of Janus, a new software package for processing in-situ measurement of solar-wind ions. Janus will provide user with an easy-to-use graphical user interface (GUI) for carrying out highly customized analyses. Transparent to the user, Janus will automatically handle the most technical tasks (e.g., the retrieval and calibration of measurements). For the first time, users with only limited knowledge about the instruments (e.g., non-instrumentalists and students) will be able to easily process measurements of solar-wind ions. Version 1 of Janus focuses specifically on such measurements from the Wind spacecraft's Faraday Cups and is slated for public release in time for this presentation.

The eSMAF: a software for the assessment and follow-up of functional autonomy in geriatrics

PubMed Central

Boissy, Patrick; Brière, Simon; Tousignant, Michel; Rousseau, Eric

2007-01-01

Background Functional status or disability forms the core of most assessment instruments used to identify mix and level of resources and services needed by older adults who possess common characteristics. The Functional Autonomy Measurement System (SMAF) is a 29-item scale measuring functional ability in five different areas. It has been recommended for use for home care, for allocation of chronic beds, for developing care plans in institutional settings and for epidemiological and evaluative studies. The SMAF can also be used with a case-mix classification system (Iso-SMAF) to allocate resources based on patients' functional autonomy characteristics. The objective of this project was to develop a software version of the SMAF to facilitate the evaluation of the functional status of older adults in health services research and to optimize the clinical decision-making process. Results The eSMAF was developed over an 24-month period using a modified waterfall software engineering process. Requirements and functional specifications were determined using focus groups of stakeholders. Different versions of the software were iteratively field-tested in clinical and research environments and software adaptations made accordingly. User documentation and online help were created to assist the deployment of the software. The software is available in French or English versions under a 30-day unregistered demonstration license or a free restricted registered academic license. It can be used locally on a Windows-based PC or over a network to input SMAF data into a database, search and aggregate client data according to clinical and/or administrative criteria, and generate summary or detailed reports of selected data sets for print or export to another database. Conclusion In the last year, the software has been successfully deployed in the clinical workflow of different institutions in research and clinical applications. The software performed relatively well in terms of stability and performance. Barriers to implementation included antiquated computer hardware, low computer literacy and access to IT support. Key factors for the deployment of the software included standardization of the workflow, user training and support. PMID:17298673

Initial operation and checkout of stratospheric aerosol gas experiment and Meteor-3M satellite

NASA Astrophysics Data System (ADS)

Habib, Shahid; Makridenko, Leonid; Chu, William P.; Salikhov, Rashid; Moore, Alvah S., Jr.; Trepte, Charles R.; Cisewski, Michael S.

2003-04-01

Under a joint agreement between the National Aeronautics and Space Agency (NASA) and the Russian Aviation and Space Agency (RASA), the Stratospheric Aerosol Gas Experiment III (SAGE III) instrument was launched in low earth orbit on December 10, 2001 aboard the Russian Meteor-3M(1) satellite from the Baikonur Cosmodrome. SAGE III is a spectrometer that measures attenuated radiation in the 282 nm to 1550 nm wavelength range to obtain the vertical profiles of ozone, aerosols, and other chemical species that are critical in studying the trends for the global climate change phenomena. This instrument version is more advanced than any of the previous versions and has more spectral bands, elaborate data gathering and storage, and intelligent terrestrial software. There are a number of Russian scientific instruments aboard the Meteor satellite in addition to the SAGE III instrument. These instruments deal with land imaging and biomass changes, hydro-meteorological monitoring, and helio-geophysical research. This mission was under development for over a period of six years and offered a number of unique technical and program management challenges for both Agencies. SAGE III has a long space heritage, and four earlier versions of this instrument have flown in space for nearly two decades now. In fact, SAGE II, the fourth instrument, is still flying in space on NASA's Earth Radiation Budget Satellite (ERBS), and has been providing important atmospheric data over the last 18 years. It has provided vital ozone and aerosol data in the mid latitudes and has contributed vastly in ozone depletion research. Ball Aerospace built the instrument under Langley Research Center's (LaRC) management. This paper presents the process and approach deployed by the SAGE III and the Meteor teams in performing the initial on-orbit checkout. It further documents a number of early science results obtained by deploying low risk, carefully coordinated procedures in resolving the serious operational issues of this satellite.

Acoustic Resonance Spectroscopy (ARS) Munition Classification System enhancements. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vela, O.A.; Huggard, J.C.

Acoustic Resonance Spectroscopy (ARS) is a non-destructive evaluation technology developed at the Los Alamos National Laboratory (LANL). This technology has resulted in three generations of instrumentation, funded by the Defense Special Weapons Agency (DSWA), specifically designed for field identification of chemical weapon (CW) munitions. Each generation of ARS instrumentation was developed with a specific user in mind. The ARS1OO was built for use by the U.N. Inspection Teams going into Iraq immediately after the Persian Gulf War. The ARS200 was built for use in the US-Russia Bilateral Chemical Weapons Treaty (the primary users for this system are the US Onsitemore » Inspection Agency (OSIA) and their Russian counterparts). The ARS300 was built with the requirements of the Organization for the Prohibition of Chemical Weapons (OPCW) in mind. Each successive system is an improved version of the previous system based on learning the weaknesses of each and, coincidentally, on the fact that more time was available to do a requirements analysis and the necessary engineering development. The ARS300 is at a level of development that warrants transferring the technology to a commercial vendor. Since LANL will supply the computer software to the selected vendor, it is possible for LANL to continue to improve the decision algorithms, add features where necessary, and adjust the user interface before the final transfer occurs. This paper describes the current system, ARS system enhancements, and software enhancements. Appendices contain the Operations Manual (software Version 3.01), and two earlier reports on enhancements.« less

CPU Performance Counter-Based Problem Diagnosis for Software Systems

DTIC Science & Technology

2009-09-01

application servers and implementation techniques), this thesis only used the Enterprise Java Bean (EJB) SessionBean version of RUBiS. The PHP and Servlet ...collection statistics at the Java Virtual Machine (JVM) level can be reused for any Java application. Other examples of gray-box instrumentation include path...used gray-box approaches. For example, PinPoint [11, 14] and [29] use request tracing to diagnose Java exceptions, endless calls, and null calls in

Effect of Software Version on the Accuracy of an Intraoral Scanning Device.

PubMed

Haddadi, Yasser; Bahrami, Golnosh; Isidor, Flemming

2018-04-06

To investigate the impact of software version on the accuracy of an intraoral scanning device. A master tooth was scanned with a high-precision optical scanner and then 10 times with a CEREC Omnicam scanner with software versions 4.4.0 and 4.4.4. Discrepancies were measured using quality control software. Mean deviation for 4.4.0 was 36.2 ± 35 μm and for 4.4.4 was 20.7 ± 14.2 μm (P ≤ .001). Software version has a significant impact on the accuracy of an intraoral scanner. It is important that researchers also publish the software version of scanners when publishing their findings.

Study of a unified hardware and software fault-tolerant architecture

NASA Technical Reports Server (NTRS)

Lala, Jaynarayan; Alger, Linda; Friend, Steven; Greeley, Gregory; Sacco, Stephen; Adams, Stuart

1989-01-01

A unified architectural concept, called the Fault Tolerant Processor Attached Processor (FTP-AP), that can tolerate hardware as well as software faults is proposed for applications requiring ultrareliable computation capability. An emulation of the FTP-AP architecture, consisting of a breadboard Motorola 68010-based quadruply redundant Fault Tolerant Processor, four VAX 750s as attached processors, and four versions of a transport aircraft yaw damper control law, is used as a testbed in the AIRLAB to examine a number of critical issues. Solutions of several basic problems associated with N-Version software are proposed and implemented on the testbed. This includes a confidence voter to resolve coincident errors in N-Version software. A reliability model of N-Version software that is based upon the recent understanding of software failure mechanisms is also developed. The basic FTP-AP architectural concept appears suitable for hosting N-Version application software while at the same time tolerating hardware failures. Architectural enhancements for greater efficiency, software reliability modeling, and N-Version issues that merit further research are identified.

Evaluation of a New Software Version of the RTVue Optical Coherence Tomograph for Image Segmentation and Detection of Glaucoma in High Myopia.

PubMed

Holló, Gábor; Shu-Wei, Hsu; Naghizadeh, Farzaneh

2016-06-01

To compare the current (6.3) and a novel software version (6.12) of the RTVue-100 optical coherence tomograph (RTVue-OCT) for ganglion cell complex (GCC) and retinal nerve fiber layer thickness (RNFLT) image segmentation and detection of glaucoma in high myopia. RNFLT and GCC scans were acquired with software version 6.3 of the RTVue-OCT on 51 highly myopic eyes (spherical refractive error ≤-6.0 D) of 51 patients, and were analyzed with both the software versions. Twenty-two eyes were nonglaucomatous, 13 were ocular hypertensive and 16 eyes had glaucoma. No difference was seen for any RNFLT, and average GCC parameter between the software versions (paired t test, P≥0.084). Global loss volume was significantly lower (more normal) with version 6.12 than with version 6.3 (Wilcoxon signed-rank test, P<0.001). The percentage agreement (κ) between the clinical (normal and ocular hypertensive vs. glaucoma) and the software-provided classifications (normal and borderline vs. outside normal limits) were 0.3219 and 0.4442 for average RNFLT, and 0.2926 and 0.4977 for average GCC with versions 1 and 2, respectively (McNemar symmetry test, P≥0.289). No difference in average RNFLT and GCC classification (McNemar symmetry test, P≥0.727) and the number of eyes with at least 1 segmentation error (P≥0.109) was found between the software versions, respectively. Although GCC segmentation was improved with software version 6.12 compared with the current version in highly myopic eyes, this did not result in a significant change of the average RNFLT and GCC values, and did not significantly improve the software-provided classification for glaucoma.

Management and Stewardship of Airborne Observational Data for the NSF/NCAR HIAPER (GV) and NSF/NCAR C-130 at the National Center for Atmospheric Research (NCAR) Earth Observing Laboratory (EOL)

NASA Astrophysics Data System (ADS)

Aquino, J.

2014-12-01

The National Science Foundation (NSF) provides the National Center for Atmospheric Research (NCAR) Earth Observing Laboratory (EOL) funding for the operation, maintenance and upgrade of two research aircraft: the NSF/NCAR High-performance Instrumented Airborne Platform for Environmental Research (HIAPER) Gulfstream V and the NSF/NCAR Hercules C-130. A suite of in-situ and remote sensing airborne instruments housed at the EOL Research Aviation Facility (RAF) provide a basic set of measurements that are typically deployed on most airborne field campaigns. In addition, instruments to address more specific research requirements are provided by collaborating participants from universities, industry, NASA, NOAA or other agencies. The data collected are an important legacy of these field campaigns. A comprehensive metadata database and integrated cyber-infrastructure, along with a robust data workflow that begins during the field phase and extends to long-term archival (current aircraft data holdings go back to 1967), assures that: all data and associated software are safeguarded throughout the data handling process; community standards of practice for data stewardship and software version control are followed; simple and timely community access to collected data and associated software tools are provided; and the quality of the collected data is preserved, with the ultimate goal of supporting research and the reproducibility of published results. The components of this data system to be presented include: robust, searchable web access to data holdings; reliable, redundant data storage; web-based tools and scripts for efficient creation, maintenance and update of data holdings; access to supplemental data and documentation; storage of data in standardized data formats; comprehensive metadata collection; mature version control; human-discernable storage practices; and procedures to inform users of changes. In addition, lessons learned, shortcomings, and desired upgrades will be discussed.

Classification of voting algorithms for N-version software

NASA Astrophysics Data System (ADS)

Tsarev, R. Yu; Durmuş, M. S.; Üstoglu, I.; Morozov, V. A.

2018-05-01

A voting algorithm in N-version software is a crucial component that evaluates the execution of each of the N versions and determines the correct result. Obviously, the result of the voting algorithm determines the outcome of the N-version software in general. Thus, the choice of the voting algorithm is a vital issue. A lot of voting algorithms were already developed and they may be selected for implementation based on the specifics of the analysis of input data. However, the voting algorithms applied in N-version software are not classified. This article presents an overview of classic and recent voting algorithms used in N-version software and the authors' classification of the voting algorithms. Moreover, the steps of the voting algorithms are presented and the distinctive features of the voting algorithms in Nversion software are defined.

Modularized Parallel Neutron Instrument Simulation on the TeraGrid

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Meili; Cobb, John W; Hagen, Mark E

2007-01-01

In order to build a bridge between the TeraGrid (TG), a national scale cyberinfrastructure resource, and neutron science, the Neutron Science TeraGrid Gateway (NSTG) is focused on introducing productive HPC usage to the neutron science community, primarily the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL). Monte Carlo simulations are used as a powerful tool for instrument design and optimization at SNS. One of the successful efforts of a collaboration team composed of NSTG HPC experts and SNS instrument scientists is the development of a software facility named PSoNI, Parallelizing Simulations of Neutron Instruments. Parallelizing the traditional serialmore » instrument simulation on TeraGrid resources, PSoNI quickly computes full instrument simulation at sufficient statistical levels in instrument de-sign. Upon SNS successful commissioning, to the end of 2007, three out of five commissioned instruments in SNS target station will be available for initial users. Advanced instrument study, proposal feasibility evalua-tion, and experiment planning are on the immediate schedule of SNS, which pose further requirements such as flexibility and high runtime efficiency on fast instrument simulation. PSoNI has been redesigned to meet the new challenges and a preliminary version is developed on TeraGrid. This paper explores the motivation and goals of the new design, and the improved software structure. Further, it describes the realized new fea-tures seen from MPI parallelized McStas running high resolution design simulations of the SEQUOIA and BSS instruments at SNS. A discussion regarding future work, which is targeted to do fast simulation for automated experiment adjustment and comparing models to data in analysis, is also presented.« less

Effect of software version and parameter settings on the marginal and internal adaptation of crowns fabricated with the CAD/CAM system.

PubMed

Shim, Ji Suk; Lee, Jin Sook; Lee, Jeong Yol; Choi, Yeon Jo; Shin, Sang Wan; Ryu, Jae Jun

2015-10-01

This study investigated the marginal and internal adaptation of individual dental crowns fabricated using a CAD/CAM system (Sirona's BlueCam), also evaluating the effect of the software version used, and the specific parameter settings in the adaptation of crowns. Forty digital impressions of a master model previously prepared were acquired using an intraoral scanner and divided into four groups based on the software version and on the spacer settings used. The versions 3.8 and 4.2 of the software were used, and the spacer parameter was set at either 40 μm or 80 μm. The marginal and internal fit of the crowns were measured using the replica technique, which uses a low viscosity silicone material that simulates the thickness of the cement layer. The data were analyzed using a Friedman two-way analysis of variance (ANOVA) and paired t-tests with significance level set at p<0.05. The two-way ANOVA analysis showed the software version (p<0.05) and the spacer parameter (p<0.05) significantly affected the crown adaptation. The crowns designed with the version 4.2 of the software showed a better fit than those designed with the version 3.8, particularly in the axial wall and in the inner margin. The spacer parameter was more accurately represented in the version 4.2 of the software than in the version 3.8. In addition, the use of the version 4.2 of the software combined with the spacer parameter set at 80 μm showed the least variation. On the other hand, the outer margin was not affected by the variables. Compared to the version 3.8 of the software, the version 4.2 can be recommended for the fabrication of well-fitting crown restorations, and for the appropriate regulation of the spacer parameter.

Investigation of Cloud Properties and Atmospheric Profiles with MODIS

NASA Technical Reports Server (NTRS)

Menzel, Paul; Ackerman, Steve; Moeller, Chris; Gumley, Liam; Strabala, Kathy; Frey, Richard; Prins, Elaine; LaPorte, Dan; Wolf, Walter

1997-01-01

The WINter Cloud Experiment (WINCE) was directed and supported by personnel from the University of Wisconsin in January and February. Data sets of good quality were collected by the MODIS Airborne Simulator (MAS) and other instruments on the NASA ER2; they will be used to develop and validate cloud detection and cloud property retrievals over winter scenes (especially over snow). Software development focused on utilities needed for all of the UW product executables; preparations for Version 2 software deliveries were almost completed. A significant effort was made, in cooperation with SBRS and MCST, in characterizing and understanding MODIS PFM thermal infrared performance; crosstalk in the longwave infrared channels continues to get considerable attention.

Dynamic Hurricane Data Analysis Tool

NASA Technical Reports Server (NTRS)

Knosp, Brian W.; Li, Peggy; Vu, Quoc A.

2009-01-01

A dynamic hurricane data analysis tool allows users of the JPL Tropical Cyclone Information System (TCIS) to analyze data over a Web medium. The TCIS software is described in the previous article, Tropical Cyclone Information System (TCIS) (NPO-45748). This tool interfaces with the TCIS database to pull in data from several different atmospheric and oceanic data sets, both observed by instruments. Users can use this information to generate histograms, maps, and profile plots for specific storms. The tool also displays statistical values for the user-selected parameter for the mean, standard deviation, median, minimum, and maximum values. There is little wait time, allowing for fast data plots over date and spatial ranges. Users may also zoom-in for a closer look at a particular spatial range. This is version 1 of the software. Researchers will use the data and tools on the TCIS to understand hurricane processes, improve hurricane forecast models and identify what types of measurements the next generation of instruments will need to collect.

CATS, continuous automated testing of seismological, hydroacoustic, and infrasound (SHI) processing software.

NASA Astrophysics Data System (ADS)

Brouwer, Albert; Brown, David; Tomuta, Elena

2017-04-01

To detect nuclear explosions, waveform data from over 240 SHI stations world-wide flows into the International Data Centre (IDC) of the Comprehensive Nuclear-Test-Ban Treaty Organization (CTBTO), located in Vienna, Austria. A complex pipeline of software applications processes this data in numerous ways to form event hypotheses. The software codebase comprises over 2 million lines of code, reflects decades of development, and is subject to frequent enhancement and revision. Since processing must run continuously and reliably, software changes are subjected to thorough testing before being put into production. To overcome the limitations and cost of manual testing, the Continuous Automated Testing System (CATS) has been created. CATS provides an isolated replica of the IDC processing environment, and is able to build and test different versions of the pipeline software directly from code repositories that are placed under strict configuration control. Test jobs are scheduled automatically when code repository commits are made. Regressions are reported. We present the CATS design choices and test methods. Particular attention is paid to how the system accommodates the individual testing of strongly interacting software components that lack test instrumentation.

Estimation and enhancement of real-time software reliability through mutation analysis

NASA Technical Reports Server (NTRS)

Geist, Robert; Offutt, A. J.; Harris, Frederick C., Jr.

1992-01-01

A simulation-based technique for obtaining numerical estimates of the reliability of N-version, real-time software is presented. An extended stochastic Petri net is employed to represent the synchronization structure of N versions of the software, where dependencies among versions are modeled through correlated sampling of module execution times. Test results utilizing specifications for NASA's planetary lander control software indicate that mutation-based testing could hold greater potential for enhancing reliability than the desirable but perhaps unachievable goal of independence among N versions.

NASA Tech Briefs, February 2005

NASA Technical Reports Server (NTRS)

2005-01-01

Topics discussed include: Instrumentation for Sensitive Gas Measurements; Apparatus for Testing Flat Specimens of Thermal Insulation; Quadrupole Ion Mass Spectrometer for Masses of 2 to 50 Da; Miniature Laser Doppler Velocimeter for Measuring Wall Shear; Coherent Laser Instrument Would Measure Range and Velocity; Printed Microinductors for Flexible Substrates; Digital Receiver for Microwave Radiometry; Printed Antennas Made Reconfigurable by Use of MEMS Switches; Traffic-Light-Preemption Vehicle-Transponder Software Module; Intersection-Controller Software Module; Central-Monitor Software Module; Estimating Effects of Multipath Propagation on GPS Signals; Parallel Adaptive Mesh Refinement Library; Predicting Noise From Aircraft Turbine-Engine Combustors; Generating Animated Displays of Spacecraft Orbits; Diagnosis and Prognosis of Weapon Systems; Training Software in Artificial-Intelligence Computing Techniques; APGEN Version 5.0; Single-Command Approach and Instrument Placement by a Robot on a Target; Three-Dimensional Audio Client Library; Isogrid Membranes for Precise, Singly Curved Reflectors; Nickel-Tin Electrode Materials for Nonaqueous Li-Ion Cells; Photocatalytic Coats in Glass Drinking-Water Bottles; Fast Laser Shutters With Low Vibratory Disturbances; Series-Connected Buck Boost Regulators; Space Physics Data Facility Web Services; Split-Resonator, Integrated-Post Vibratory Microgyroscope; Blended Buffet-Load-Alleviation System for Fighter Airplane; Gifford-McMahon/Joule-Thomson Refrigerator Cools to 2.5 K; High-Temperature, High-Load-Capacity Radial Magnetic Bearing; Fabrication of Spherical Reflectors in Outer Space; Automated Rapid Prototyping of 3D Ceramic Parts; Tissue Engineering Using Transfected Growth-Factor Genes; Automation of Vapor-Diffusion Growth of Protein Crystals; Atom Skimmers and Atom Lasers Utilizing Them; Gears Based on Carbon Nanotubes; Patched Off-Axis Bending/Twisting Actuators for Thin Mirrors; and Improving Control in a Joule-Thomson Refrigerator.

Educational interactive multimedia software: The impact of interactivity on learning

NASA Astrophysics Data System (ADS)

Reamon, Derek Trent

This dissertation discusses the design, development, deployment and testing of two versions of educational interactive multimedia software. Both versions of the software are focused on teaching mechanical engineering undergraduates about the fundamentals of direct-current (DC) motor physics and selection. The two versions of Motor Workshop software cover the same basic materials on motors, but differ in the level of interactivity between the students and the software. Here, the level of interactivity refers to the particular role of the computer in the interaction between the user and the software. In one version, the students navigate through information that is organized by topic, reading text, and viewing embedded video clips; this is referred to as "low-level interactivity" software because the computer simply presents the content. In the other version, the students are given a task to accomplish---they must design a small motor-driven 'virtual' vehicle that competes against computer-generated opponents. The interaction is guided by the software which offers advice from 'experts' and provides contextual information; we refer to this as "high-level interactivity" software because the computer is actively participating in the interaction. The software was used in two sets of experiments, where students using the low-level interactivity software served as the 'control group,' and students using the highly interactive software were the 'treatment group.' Data, including pre- and post-performance tests, questionnaire responses, learning style characterizations, activity tracking logs and videotapes were collected for analysis. Statistical and observational research methods were applied to the various data to test the hypothesis that the level of interactivity effects the learning situation, with higher levels of interactivity being more effective for learning. The results show that both the low-level and high-level interactive versions of the software were effective in promoting learning about the subject of motors. The focus of learning varied between users of the two versions, however. The low-level version was more effective for teaching concepts and terminology, while the high-level version seemed to be more effective for teaching engineering applications.

78 FR 54365 - Uniform Fine Assessment Version 4.0 Software; Calculating Amounts of Civil Penalties for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-03

... Version 4.0 Software; Calculating Amounts of Civil Penalties for Violations of Regulations AGENCY: Federal... Agency has begun using the Uniform Fine Assessment (UFA) Version 4.0 software to calculate the amounts of... penalties for violations of the FMCSRs and HMRs and since the mid- 1990's FMCSA has used its UFA software to...

Gray QB-sing-faced version 2 (SF2) open environment test report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Plummer, J.; Immel, D.; Bobbitt, J.

This report details the design upgrades incorporated into the new version of the GrayQbTM SF2 device and the characterization testing of this upgraded device. Results from controlled characterization testing in the Savannah River National Laboratory (SRNL) R&D Engineering Imaging and Radiation Lab (IRL) and the Savannah River Site (SRS) Health Physics Instrument Calibration Laboratory (HPICL) is presented, as well as results from the open environment field testing performed in the E-Area Low Level Waste Storage Area. Resultant images presented in this report were generated using the SRNL developed Radiation Analyzer (RAzerTM) software program which overlays the radiation contour images ontomore » the visual image of the location being surveyed.« less

Gender subordination in the vulnerability of women to domestic violence.

PubMed

Macedo Piosiadlo, Laura Christina; Godoy Serpa da Fonseca, Rosa Maria

2016-06-01

To create and validate an instrument that identifies women's vulnerability to domestic violence through gender subordination indicators in the family. An instrument consisting on 61 phrases was created, that indicates gender subordination in the family. After the assessment from ten judges, 34 phrases were validated. The approved version was administered to 321 health service users of São José dos Pinhais (Estado de Paraná, Brasil), along with the validated Portuguese version of the Abuse Assessment Screen (AAS) (for purposes of separating the sample group - the ''YES'' group was composed of women who have suffered violence and the ''NO'' group consisted of women who had not suffered violence). Data were transferred into the Statistical Package for the Social Sciences (SPSS) software, version 22, and quantitatively analyzed using exploratory and factor analysis, and tests for internal consistency. After analysis (Kaiser-Meyer-Olkin (KMO) statistics, Monte Carlo Principal Components Analysis (PCA, and diagram segmentation), two factors were identified: F1 - consisting of phrases related to home maintenance and family structure; F2 - phrases intrinsic to the couple's relationship. For the statements that reinforce gender subordination, the mean of the factors were higher for the group that answered YES to one of the violence identifying issues. The created instrument was able to identify women who were vulnerable to domestic violence using gender subordination indicators. This could be an important tool for nurses and other professionals in multidisciplinary teams, in order to organize and plan actions to prevent violence against women.

GAIA virtual observatory - development and practices

NASA Astrophysics Data System (ADS)

Syrjäsuo, Mikko; Marple, Steve

2010-05-01

The Global Auroral Imaging Access, or GAIA, is a virtual observatory providing quick access to summary data from satellite and ground-based instruments that remote sense auroral precipitation (http://gaia-vxo.org). This web-based service facilitates locating data relevant to particular events by simultaneously displaying summary images from various data sets around the world. At the moment, there are GAIA server nodes in Canada, Finland, Norway and the UK. The development is an international effort and the software and metadata are freely available. The GAIA system is based on a relational database which is queried by a dedicated software suite that also creates the graphical end-user interface if such is needed. Most commonly, the virtual observatory is used interactively by using a web browser: the user provides the date and the type of data of interest. As the summary data from multiple instruments are displayed simultaneously, the user can conveniently explore the recorded data. The virtual observatory provides essentially instant access to the images originating from all major auroral instrument networks including THEMIS, NORSTAR, GLORIA and MIRACLE. The scientific, educational and outreach use is limited by creativity rather than access. The first version of the GAIA was developed at the University of Calgary (Alberta, Canada) in 2004-2005. This proof-of-concept included mainly THEMIS and MIRACLE data, which comprised of millions of summary plots and thumbnail images. However, it was soon realised that a complete re-design was necessary to increase flexibility. In the presentation, we will discuss the early history and motivation of GAIA as well as how the development continued towards the current version. The emphasis will be on practical problems and their solutions. Relevant design choices will also be highlighted.

Low Cost Ways to Keep Software Current.

ERIC Educational Resources Information Center

Schultheis, Robert A.

1992-01-01

Discusses strategies for providing students with current computer software technology including acquiring previous versions of software, obtaining demonstration software, using student versions, getting examination software, buying from mail order firms, buying few copies, exploring site licenses, acquiring shareware or freeware, and applying for…

The GLAS Science Algorithm Software (GSAS) User's Guide Version 7

NASA Technical Reports Server (NTRS)

Lee, Jeffrey E.

2013-01-01

The Geoscience Laser Altimeter System (GLAS) is the primary instrument for the ICESat (Ice, Cloud and Land Elevation Satellite) laser altimetry mission. ICESat was the benchmark Earth Observing System (EOS) mission for measuring ice sheet mass balance, cloud and aerosol heights, as well as land topography and vegetation characteristics. From 2003 to 2009, the ICESat mission provided multi-year elevation data needed to determine ice sheet mass balance as well as cloud property information, especially for stratospheric clouds common over polar areas. It also provided topography and vegetation data around the globe, in addition to the polar-specific coverage over the Greenland and Antarctic ice sheets.This document is the final version of the GLAS Science Algorithm Software Users Guide document. It contains the instructions to install the GLAS Science Algorithm Software (GSAS) in the production environment that was used to create the standard data products. It also describes the usage of each GSAS program in that environment with their required inputs and outputs. Included are a number of utility programs that are used to create ancillary data files that are used in the processing but generally are not distributed to the public as data products. Of importance is the values for the large number of constants used in the GSAS algorithm during processing are provided in an appendix.

The Challenges of Searching, Finding, Reading, Understanding and Using Mars Mission Datasets for Science Analysis

NASA Technical Reports Server (NTRS)

Johnson, Jeffrey R.

2006-01-01

This viewgraph presentation reviews the problems that non-mission researchers have in accessing data to use in their analysis of Mars. The increasing complexity of Mars datasets results in custom software development by instrument teams that is often the only means to visualize and analyze the data. The solutions to the problem are to continue efforts toward synergizing data from multiple missions and making the data, s/w, derived products available in standardized, easily-accessible formats, encourage release of "lite" versions of mission-related software prior to end-of-mission, and planetary image data should be systematically processed in a coordinated way and made available in an easily accessed form. The recommendations of Mars Environmental GIS Workshop are reviewed.

Improved instrumental magnitude prediction expected from version 2 of the NASA SKY2000 master star catalog

NASA Technical Reports Server (NTRS)

Sande, C. B.; Brasoveanu, D.; Miller, A. C.; Home, A. T.; Tracewell, D. A.; Warren, W. H., Jr.

1998-01-01

The SKY2000 Master Star Catalog (MC), Version 2 and its predecessors have been designed to provide the basic astronomical input data needed for satellite acquisition and attitude determination on NASA spacecraft. Stellar positions and proper motions are the primary MC data required for operations support followed closely by the stellar brightness observed in various standard astronomical passbands. The instrumental red-magnitude prediction subsystem (REDMAG) in the MMSCAT software package computes the expected instrumental color index (CI) [sensor color correction] from an observed astronomical stellar magnitude in the MC and the characteristics of the stellar spectrum, astronomical passband, and sensor sensitivity curve. The computation is more error prone the greater the mismatch of the sensor sensitivity curve characteristics and those of the observed astronomical passbands. This paper presents the preliminary performance analysis of a typical red-sensitive CCDST during acquisition of sensor data from the two Ball CT-601 ST's onboard the Rossi X-Ray Timing Explorer (RXTE). A comparison is made of relative star positions measured in the ST FOV coordinate system with the expected results computed from the recently released Tycho Catalogue. The comparison is repeated for a group of observed stars with nearby, bright neighbors in order to determine the tracker behavior in the presence of an interfering, near neighbor (NN). The results of this analysis will be used to help define a new photoelectric photometric instrumental sensor magnitude system (S) that is based on several thousand bright star magnitudes observed with the PXTE ST's. This new system will be implemented in Version 2 of the SKY2000 MC to provide improved predicted magnitudes in the mission run catalogs.

BASKET on-board software library

NASA Astrophysics Data System (ADS)

Luntzer, Armin; Ottensamer, Roland; Kerschbaum, Franz

2014-07-01

The University of Vienna is a provider of on-board data processing software with focus on data compression, such as used on board the highly successful Herschel/PACS instrument, as well as in the small BRITE-Constellation fleet of cube-sats. Current contributions are made to CHEOPS, SAFARI and PLATO. The effort was taken to review the various functions developed for Herschel and provide a consolidated software library to facilitate the work for future missions. This library is a shopping basket of algorithms. Its contents are separated into four classes: auxiliary functions (e.g. circular buffers), preprocessing functions (e.g. for calibration), lossless data compression (arithmetic or Rice coding) and lossy reduction steps (ramp fitting etc.). The "BASKET" has all functionality that is needed to create an on-board data processing chain. All sources are written in C, supplemented by optimized versions in assembly, targeting popular CPU architectures for space applications. BASKET is open source and constantly growing

An experimental evaluation of software redundancy as a strategy for improving reliability

NASA Technical Reports Server (NTRS)

Eckhardt, Dave E., Jr.; Caglayan, Alper K.; Knight, John C.; Lee, Larry D.; Mcallister, David F.; Vouk, Mladen A.; Kelly, John P. J.

1990-01-01

The strategy of using multiple versions of independently developed software as a means to tolerate residual software design faults is suggested by the success of hardware redundancy for tolerating hardware failures. Although, as generally accepted, the independence of hardware failures resulting from physical wearout can lead to substantial increases in reliability for redundant hardware structures, a similar conclusion is not immediate for software. The degree to which design faults are manifested as independent failures determines the effectiveness of redundancy as a method for improving software reliability. Interest in multi-version software centers on whether it provides an adequate measure of increased reliability to warrant its use in critical applications. The effectiveness of multi-version software is studied by comparing estimates of the failure probabilities of these systems with the failure probabilities of single versions. The estimates are obtained under a model of dependent failures and compared with estimates obtained when failures are assumed to be independent. The experimental results are based on twenty versions of an aerospace application developed and certified by sixty programmers from four universities. Descriptions of the application, development and certification processes, and operational evaluation are given together with an analysis of the twenty versions.

The Scientific Uplink and User Support System for SIRTF

NASA Astrophysics Data System (ADS)

Heinrichsen, I.; Chavez, J.; Hartley, B.; Mei, Y.; Potts, S.; Roby, T.; Turek, G.; Valjavec, E.; Wu, X.

The Space Infrared Telescope Facility (SIRTF) is one of NASA's Great Observatory missions, scheduled for launch in 2001. As such its ground segment design is driven by the requirement to provide strong support for the entire astronomical community starting with the call for Legacy Proposals in early 2000. In this contribution, we present the astronomical user interface and the design of the server software that comprises the Scientific Uplink System for SIRTF. The software architecture is split into three major parts: A front-end Java application deployed to the astronomical community providing the capabilities to visualize and edit proposals and the associated lists of observations. This observer toolkit provides templates to define all parameters necessary to carry out the required observations. A specialized version of this software, based on the same overall architecture, is used internal to the SIRTF Science Center to prepare calibration and engineering observations. A Weblogic (TM) based middleware component brokers the transactions with the servers, astronomical image and catalog sources as well as the SIRTF operational databases. Several server systems perform the necessary computations, to obtain resource estimates, target visibilities and to access the instrument models for signal to noise calculations. The same server software is used internally at a later stage to derive the detailed command sequences needed by the SIRTF instruments and spacecraft to execute a given observation.

Volpe SuperFar V6.0 Software and Support Documentation; Letter Report V324-FB48B3-LR3

DOT National Transportation Integrated Search

2017-09-29

This Letter Report serves to deliver the third external release version of the USDOT Volpe Centers SuperFAR Spectral Aircraft Noise Processing Software (Version 6.0). Earlier versions of the software were delivered to FAA in February 2015 and Marc...

An experimental investigation of fault tolerant software structures in an avionics application

NASA Technical Reports Server (NTRS)

Caglayan, Alper K.; Eckhardt, Dave E., Jr.

1989-01-01

The objective of this experimental investigation is to compare the functional performance and software reliability of competing fault tolerant software structures utilizing software diversity. In this experiment, three versions of the redundancy management software for a skewed sensor array have been developed using three diverse failure detection and isolation algorithms and incorporated into various N-version, recovery block and hybrid software structures. The empirical results show that, for maximum functional performance improvement in the selected application domain, the results of diverse algorithms should be voted before being processed by multiple versions without enforced diversity. Results also suggest that when the reliability gain with an N-version structure is modest, recovery block structures are more feasible since higher reliability can be obtained using an acceptance check with a modest reliability.

Development of N-version software samples for an experiment in software fault tolerance

NASA Technical Reports Server (NTRS)

Lauterbach, L.

1987-01-01

The report documents the task planning and software development phases of an effort to obtain twenty versions of code independently designed and developed from a common specification. These versions were created for use in future experiments in software fault tolerance, in continuation of the experimental series underway at the Systems Validation Methods Branch (SVMB) at NASA Langley Research Center. The 20 versions were developed under controlled conditions at four U.S. universities, by 20 teams of two researchers each. The versions process raw data from a modified Redundant Strapped Down Inertial Measurement Unit (RSDIMU). The specifications, and over 200 questions submitted by the developers concerning the specifications, are included as appendices to this report. Design documents, and design and code walkthrough reports for each version, were also obtained in this task for use in future studies.

The mathematical statement for the solving of the problem of N-version software system design

NASA Astrophysics Data System (ADS)

Kovalev, I. V.; Kovalev, D. I.; Zelenkov, P. V.; Voroshilova, A. A.

2015-10-01

The N-version programming, as a methodology of the fault-tolerant software systems design, allows successful solving of the mentioned tasks. The use of N-version programming approach turns out to be effective, since the system is constructed out of several parallel executed versions of some software module. Those versions are written to meet the same specification but by different programmers. The problem of developing an optimal structure of N-version software system presents a kind of very complex optimization problem. This causes the use of deterministic optimization methods inappropriate for solving the stated problem. In this view, exploiting heuristic strategies looks more rational. In the field of pseudo-Boolean optimization theory, the so called method of varied probabilities (MVP) has been developed to solve problems with a large dimensionality.

Using MATLAB Software on the Peregrine System | High-Performance Computing

Science.gov Websites

| NREL MATLAB Software on the Peregrine System Using MATLAB Software on the Peregrine System Learn how to use MATLAB software on the Peregrine system. Running MATLAB in Batch Mode Using the node. Understanding Versions and Licenses Learn about the MATLAB software versions and licenses

A new on-axis micro-spectrophotometer for combining Raman, fluorescence and UV/Vis absorption spectroscopy with macromolecular crystallography at the Swiss Light Source

PubMed Central

Pompidor, Guillaume; Dworkowski, Florian S. N.; Thominet, Vincent; Schulze-Briese, Clemens; Fuchs, Martin R.

2013-01-01

The combination of X-ray diffraction experiments with optical methods such as Raman, UV/Vis absorption and fluorescence spectroscopy greatly enhances and complements the specificity of the obtained information. The upgraded version of the in situ on-axis micro-spectrophotometer, MS2, at the macromolecular crystallography beamline X10SA of the Swiss Light Source is presented. The instrument newly supports Raman and resonance Raman spectroscopy, in addition to the previously available UV/Vis absorption and fluorescence modes. With the recent upgrades of the spectral bandwidth, instrument stability, detection efficiency and control software, the application range of the instrument and its ease of operation were greatly improved. Its on-axis geometry with collinear X-ray and optical axes to ensure optimal control of the overlap of sample volumes probed by each technique is still unique amongst comparable facilities worldwide and the instrument has now been in general user operation for over two years. PMID:23955041

A new on-axis micro-spectrophotometer for combining Raman, fluorescence and UV/Vis absorption spectroscopy with macromolecular crystallography at the Swiss Light Source.

PubMed

Pompidor, Guillaume; Dworkowski, Florian S N; Thominet, Vincent; Schulze-Briese, Clemens; Fuchs, Martin R

2013-09-01

The combination of X-ray diffraction experiments with optical methods such as Raman, UV/Vis absorption and fluorescence spectroscopy greatly enhances and complements the specificity of the obtained information. The upgraded version of the in situ on-axis micro-spectrophotometer, MS2, at the macromolecular crystallography beamline X10SA of the Swiss Light Source is presented. The instrument newly supports Raman and resonance Raman spectroscopy, in addition to the previously available UV/Vis absorption and fluorescence modes. With the recent upgrades of the spectral bandwidth, instrument stability, detection efficiency and control software, the application range of the instrument and its ease of operation were greatly improved. Its on-axis geometry with collinear X-ray and optical axes to ensure optimal control of the overlap of sample volumes probed by each technique is still unique amongst comparable facilities worldwide and the instrument has now been in general user operation for over two years.

Evaluating Transportation by Comparing Several uses of Rotary Endodontic Files.

PubMed

Elemam, Ranya F; Capelas, J A; Vaz, Mário A P; Viriato, Nuno; Pereira, M L; Azevedo, A; West, John

2015-12-01

To evaluate the frequent use of ProTaper Next (PTN; Dentsply Maillefer, Ballaigues, Switzerland) systems on shaping ability of root canal utilizing Solidworks (2014, Dassault Systemes) software. Thirty-six root canals in clear resin blocks (Dentsply-Maillefer) were allocated into six experimental groups (n = 36). Six new sets of PTN instruments (Dentsply Maillefer, Ballaigues, Switzerland) were used six times to shape the resin blocks. A #15 K-file was inserted to the working length (WL), followed by ProGlider (PG) to create a glide path. Sequential use of PTN instrumentation in a crown-down technique was used to reach size (30/07) apically. Macroscopic photos of the blocks were taken before and after instrumentation, layered by Paint Shop Pro 9 from JascSoftware, and then canal transportation was measured using Solidwork 2014. The data were analyzed by SPSS software version 22. Multivariate statistical analysis general linear model (GLM) was also applied. Bonferroni correction test was used in multiple comparisons and the statistical significance was set to 0.05. There was no difference in canal transportation resulted from utilizing PTN files after six multiple uses; in addition, the PTN files showed ability to maintain the original canal anatomy, especially in the apical level, where lowest total mean value of canal center displacement was seen (3 mm level) (0.019 ± 0.017). ProTaper Next files can be used to prepare single and multiple canals in a single furcated tooth. ProTaper Next nickel-titanium (NiTi) file system is a safe instrument that respects the canal shape, allows practitioners to treat difficult cases with good results, and low risk of separation.

Instrumentation: Software-Driven Instrumentation: The New Wave.

ERIC Educational Resources Information Center

Salit, M. L.; Parsons, M. L.

1985-01-01

Software-driven instrumentation makes measurements that demand a computer as an integral part of either control, data acquisition, or data reduction. The structure of such instrumentation, hardware requirements, and software requirements are discussed. Examples of software-driven instrumentation (such as wavelength-modulated continuum source…

Software Fault Tolerance: A Tutorial

NASA Technical Reports Server (NTRS)

Torres-Pomales, Wilfredo

2000-01-01

Because of our present inability to produce error-free software, software fault tolerance is and will continue to be an important consideration in software systems. The root cause of software design errors is the complexity of the systems. Compounding the problems in building correct software is the difficulty in assessing the correctness of software for highly complex systems. After a brief overview of the software development processes, we note how hard-to-detect design faults are likely to be introduced during development and how software faults tend to be state-dependent and activated by particular input sequences. Although component reliability is an important quality measure for system level analysis, software reliability is hard to characterize and the use of post-verification reliability estimates remains a controversial issue. For some applications software safety is more important than reliability, and fault tolerance techniques used in those applications are aimed at preventing catastrophes. Single version software fault tolerance techniques discussed include system structuring and closure, atomic actions, inline fault detection, exception handling, and others. Multiversion techniques are based on the assumption that software built differently should fail differently and thus, if one of the redundant versions fails, it is expected that at least one of the other versions will provide an acceptable output. Recovery blocks, N-version programming, and other multiversion techniques are reviewed.

Systematic comparisons between PRISM version 1.0.0, BAP, and CSMIP ground-motion processing

USGS Publications Warehouse

Kalkan, Erol; Stephens, Christopher

2017-02-23

A series of benchmark tests was run by comparing results of the Processing and Review Interface for Strong Motion data (PRISM) software version 1.0.0 to Basic Strong-Motion Accelerogram Processing Software (BAP; Converse and Brady, 1992), and to California Strong Motion Instrumentation Program (CSMIP) processing (Shakal and others, 2003, 2004). These tests were performed by using the MatLAB implementation of PRISM, which is equivalent to its public release version in Java language. Systematic comparisons were made in time and frequency domains of records processed in PRISM and BAP, and in CSMIP, by using a set of representative input motions with varying resolutions, frequency content, and amplitudes. Although the details of strong-motion records vary among the processing procedures, there are only minor differences among the waveforms for each component and within the frequency passband common to these procedures. A comprehensive statistical evaluation considering more than 1,800 ground-motion components demonstrates that differences in peak amplitudes of acceleration, velocity, and displacement time series obtained from PRISM and CSMIP processing are equal to or less than 4 percent for 99 percent of the data, and equal to or less than 2 percent for 96 percent of the data. Other statistical measures, including the Euclidian distance (L2 norm) and the windowed root mean square level of processed time series, also indicate that both processing schemes produce statistically similar products.

Quick Overview Scout 2008 Version 1.0

EPA Science Inventory

The Scout 2008 version 1.0 statistical software package has been updated from past DOS and Windows versions to provide classical and robust univariate and multivariate graphical and statistical methods that are not typically available in commercial or freeware statistical softwar...

A new approach for instrument software at Gemini

NASA Astrophysics Data System (ADS)

Gillies, Kim; Nunez, Arturo; Dunn, Jennifer

2008-07-01

Gemini Observatory is now developing its next generation of astronomical instruments, the Aspen instruments. These new instruments are sophisticated and costly requiring large distributed, collaborative teams. Instrument software groups often include experienced team members with existing mature code. Gemini has taken its experience from the previous generation of instruments and current hardware and software technology to create an approach for developing instrument software that takes advantage of the strengths of our instrument builders and our own operations needs. This paper describes this new software approach that couples a lightweight infrastructure and software library with aspects of modern agile software development. The Gemini Planet Imager instrument project, which is currently approaching its critical design review, is used to demonstrate aspects of this approach. New facilities under development will face similar issues in the future, and the approach presented here can be applied to other projects.

Radiative transfer modeling through terrestrial atmosphere and ocean accounting for inelastic processes: Software package SCIATRAN

NASA Astrophysics Data System (ADS)

Rozanov, V. V.; Dinter, T.; Rozanov, A. V.; Wolanin, A.; Bracher, A.; Burrows, J. P.

2017-06-01

SCIATRAN is a comprehensive software package which is designed to model radiative transfer processes in the terrestrial atmosphere and ocean in the spectral range from the ultraviolet to the thermal infrared (0.18-40 μm). It accounts for multiple scattering processes, polarization, thermal emission and ocean-atmosphere coupling. The main goal of this paper is to present a recently developed version of SCIATRAN which takes into account accurately inelastic radiative processes in both the atmosphere and the ocean. In the scalar version of the coupled ocean-atmosphere radiative transfer solver presented by Rozanov et al. [61] we have implemented the simulation of the rotational Raman scattering, vibrational Raman scattering, chlorophyll and colored dissolved organic matter fluorescence. In this paper we discuss and explain the numerical methods used in SCIATRAN to solve the scalar radiative transfer equation including trans-spectral processes, and demonstrate how some selected radiative transfer problems are solved using the SCIATRAN package. In addition we present selected comparisons of SCIATRAN simulations with those published benchmark results, independent radiative transfer models, and various measurements from satellite, ground-based, and ship-borne instruments. The extended SCIATRAN software package along with a detailed User's Guide is made available for scientists and students, who are undertaking their own research typically at universities, via the web page of the Institute of Environmental Physics (IUP), University of Bremen: http://www.iup.physik.uni-bremen.de.

Detection of faults and software reliability analysis

NASA Technical Reports Server (NTRS)

Knight, J. C.

1986-01-01

Multiversion or N-version programming was proposed as a method of providing fault tolerance in software. The approach requires the separate, independent preparation of multiple versions of a piece of software for some application. Specific topics addressed are: failure probabilities in N-version systems, consistent comparison in N-version systems, descriptions of the faults found in the Knight and Leveson experiment, analytic models of comparison testing, characteristics of the input regions that trigger faults, fault tolerance through data diversity, and the relationship between failures caused by automatically seeded faults.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benahmed, A.; Elkarch, H.

This new portable radiological environmental monitor consists of 2 main components, Gamma ionization chamber and a FPGA-based electronic enclosure linked to convivial software for treatment and analyzing. The HPIC ion chamber is the heart of this radiation measurement system and is running in range from 0 to 100 mR/h, so that the sensitivity at the output is 20 mV/μR/h, with a nearly flat energy response from 0,07 to 10 MEV. This paper presents a contribution for developing a new nuclear measurement data acquisition system based on Cyclone III FPGA Starter Kit ALTERA, and a user-friendly software to run real-time controlmore » and data processing. It was developed to substitute the older radiation monitor RSS-112 PIC installed in CNESTEN's Laboratory in order to improve some of its functionalities related to acquisition time and data memory capacity. As for the associated acquisition software, it was conceived under the virtual LabView platform from National Instrument, and offers a variety of system setup for radiation environmental monitoring. It gives choice to display both the statistical data and the dose rate. Statistical data shows a summary of current data, current time/date and dose integrator values, and the dose rate displays the current dose rate in large numbers for viewing from a distance as well as the date and time. The prototype version of this new instrument and its data processing software has been successfully tested and validated for viewing and monitoring the environmental radiation of Moroccan nuclear center. (authors)« less

Designing Tracking Software for Image-Guided Surgery Applications: IGSTK Experience

PubMed Central

Enquobahrie, Andinet; Gobbi, David; Turek, Matt; Cheng, Patrick; Yaniv, Ziv; Lindseth, Frank; Cleary, Kevin

2009-01-01

Objective Many image-guided surgery applications require tracking devices as part of their core functionality. The Image-Guided Surgery Toolkit (IGSTK) was designed and developed to interface tracking devices with software applications incorporating medical images. Methods IGSTK was designed as an open source C++ library that provides the basic components needed for fast prototyping and development of image-guided surgery applications. This library follows a component-based architecture with several components designed for specific sets of image-guided surgery functions. At the core of the toolkit is the tracker component that handles communication between a control computer and navigation device to gather pose measurements of surgical instruments present in the surgical scene. The representations of the tracked instruments are superimposed on anatomical images to provide visual feedback to the clinician during surgical procedures. Results The initial version of the IGSTK toolkit has been released in the public domain and several trackers are supported. The toolkit and related information are available at www.igstk.org. Conclusion With the increased popularity of minimally invasive procedures in health care, several tracking devices have been developed for medical applications. Designing and implementing high-quality and safe software to handle these different types of trackers in a common framework is a challenging task. It requires establishing key software design principles that emphasize abstraction, extensibility, reusability, fault-tolerance, and portability. IGSTK is an open source library that satisfies these needs for the image-guided surgery community. PMID:20037671

Verifying Diagnostic Software

NASA Technical Reports Server (NTRS)

Lindsey, Tony; Pecheur, Charles

2004-01-01

Livingstone PathFinder (LPF) is a simulation-based computer program for verifying autonomous diagnostic software. LPF is designed especially to be applied to NASA s Livingstone computer program, which implements a qualitative-model-based algorithm that diagnoses faults in a complex automated system (e.g., an exploratory robot, spacecraft, or aircraft). LPF forms a software test bed containing a Livingstone diagnosis engine, embedded in a simulated operating environment consisting of a simulator of the system to be diagnosed by Livingstone and a driver program that issues commands and faults according to a nondeterministic scenario provided by the user. LPF runs the test bed through all executions allowed by the scenario, checking for various selectable error conditions after each step. All components of the test bed are instrumented, so that execution can be single-stepped both backward and forward. The architecture of LPF is modular and includes generic interfaces to facilitate substitution of alternative versions of its different parts. Altogether, LPF provides a flexible, extensible framework for simulation-based analysis of diagnostic software; these characteristics also render it amenable to application to diagnostic programs other than Livingstone.

Comparison of apical debris extrusion during root canal preparation using instrumentation techniques with two operating principles: An in vitro study

PubMed Central

Verma, Mudita; Meena, N.; Kumari, R. Anitha; Mallandur, Sudhanva; Vikram, R.; Gowda, Vishwas

2017-01-01

Aims: The aim of this study was to quantify the debris extruded apically from teeth using rotary and reciprocation instrumentation systems. Subjects and Methods: Eighty extracted human mandibular premolars with single canals and similar lengths were instrumented using ProTaper Universal (40, 06; Dentsply Maillefer, Ballaigues, Switzerland), ProTaper Next (40, 06; Dentsply Maillefer, Ballaigues, Switzerland), WaveOne (40, 06; Dentsply Maillefer, Ballaigues, Switzerland), and Reciproc (R40; VDW GmbH, Munich, Germany). Debris extruded during instrumentation was collected into preweighed Eppendorf tubes, which were then stored in an incubator at 70°C for 5 days. The final weight of the Eppendorf tubes with the extruded debris was calculated after obtaining the mean of three consecutive weights obtained for each tube. Statistical Analysis Used: Statistical analysis was performed using SPSS version 16.0 software. The groups were compared using the Kruskal–Wallis test for all variables. Results: There was no statistically significant difference between the groups (P = 0.1114). However, the ProTaper Universal group produced more extrusion and ProTaper Next produced least debris extrusion among the instrument groups (P > 0.05). Conclusions: All instrumentation techniques were associated with extruded debris. PMID:28855755

Detection of faults and software reliability analysis

NASA Technical Reports Server (NTRS)

Knight, John C.

1987-01-01

Multi-version or N-version programming is proposed as a method of providing fault tolerance in software. The approach requires the separate, independent preparation of multiple versions of a piece of software for some application. These versions are executed in parallel in the application environment; each receives identical inputs and each produces its version of the required outputs. The outputs are collected by a voter and, in principle, they should all be the same. In practice there may be some disagreement. If this occurs, the results of the majority are taken to be the correct output, and that is the output used by the system. A total of 27 programs were produced. Each of these programs was then subjected to one million randomly-generated test cases. The experiment yielded a number of programs containing faults that are useful for general studies of software reliability as well as studies of N-version programming. Fault tolerance through data diversity and analytic models of comparison testing are discussed.

Updated Global Data from the Guvi Instrument: New Products, Updated Calibration, and a New Web Interface

NASA Astrophysics Data System (ADS)

Schaefer, R. K.; Paxton, L. J.; Romeo, G.; Wolven, B. C.; Zhang, Y.; Comberiate, J.

2014-12-01

With it's high inclination orbit, GUVI provides global coverage of the ionosphere/thermosphere system, revisiting each polar region 15 times a day. The GUVI instrument has long been a resource for the ITM community with a panoply of data products available from the GUVI website (http://guvi.jhuapl.edu). GUVI is in a high inclination orbit and so provides coverage of both hemispheres. With the release last year of the data products from the DMSO/SSUSI instrument, particularly more detailed auroral zone products (Q, E0, Hemispheric Power, discrete auroral arcs, proton precipitation regions), new equatorial ionospheric products (3D electron densities, bubbles), a whole new set of UV data products has become available. SSUSI are available from http://ssusi.jhuapl.edu. To leverage the experience and knowledge gained from running all of these instruments we have adapted the SSUSI products so they can be made from GUVI telemetry. There are now updated versions of GUVI legacy products as well as brand new products. In addition, better on-orbit calibration techniques developed for SSUSI have now been applied to the GUVI instrument calibration - there is now a common set of software for calibrating both instruments. With a common data format, calibration, and product definition, the data from all SSUSI and GUVI instruments can now be easily combined to get multiple instruments to cover the hemispheres to do a variety of global studies. In addition, the GUVI spectrographic mode data provides great detail about spectrographic features (e.g. O/N2 ratios, NO band emission) that are important for understanding dynamical processes in the thermosphere. A new version of the GUVI website (with the same interface as the SSUSI website) has been launched from guvi.jhuapl.edu to showcase the legacy products made with the new calibration and also highlight the newly developed products for the GUVI imaging and spectrographic modes.

ICESat Science Investigator led Processing System (I-SIPS)

NASA Astrophysics Data System (ADS)

Bhardwaj, S.; Bay, J.; Brenner, A.; Dimarzio, J.; Hancock, D.; Sherman, M.

2003-12-01

The ICESat Science Investigator-led Processing System (I-SIPS) generates the GLAS standard data products. It consists of two main parts the Scheduling and Data Management System (SDMS) and the Geoscience Laser Altimeter System (GLAS) Science Algorithm Software. The system has been operational since the successful launch of ICESat. It ingests data from the GLAS instrument, generates GLAS data products, and distributes them to the GLAS Science Computing Facility (SCF), the Instrument Support Facility (ISF) and the National Snow and Ice Data Center (NSIDC) ECS DAAC. The SDMS is the Planning, Scheduling and Data Management System that runs the GLAS Science Algorithm Software (GSAS). GSAS is based on the Algorithm Theoretical Basis Documents provided by the Science Team and is developed independently of SDMS. The SDMS provides the processing environment to plan jobs based on existing data, control job flow, data distribution, and archiving. The SDMS design is based on a mission-independent architecture that imposes few constraints on the science code thereby facilitating I-SIPS integration. I-SIPS currently works in an autonomous manner to ingest GLAS instrument data, distribute this data to the ISF, run the science processing algorithms to produce the GLAS standard products, reprocess data when new versions of science algorithms are released, and distributes the products to the SCF, ISF, and NSIDC. I-SIPS has a proven performance record, delivering the data to the SCF within hours after the initial instrument activation. The I-SIPS design philosophy gives this system a high potential for reuse in other science missions.

Application of majority voting and consensus voting algorithms in N-version software

NASA Astrophysics Data System (ADS)

Tsarev, R. Yu; Durmuş, M. S.; Üstoglu, I.; Morozov, V. A.

2018-05-01

N-version programming is one of the most common techniques which is used to improve the reliability of software by building in fault tolerance, redundancy and decreasing common cause failures. N different equivalent software versions are developed by N different and isolated workgroups by considering the same software specifications. The versions solve the same task and return results that have to be compared to determine the correct result. Decisions of N different versions are evaluated by a voting algorithm or the so-called voter. In this paper, two of the most commonly used software voting algorithms such as the majority voting algorithm and the consensus voting algorithm are studied. The distinctive features of Nversion programming with majority voting and N-version programming with consensus voting are described. These two algorithms make a decision about the correct result on the base of the agreement matrix. However, if the equivalence relation on the agreement matrix is not satisfied it is impossible to make a decision. It is shown that the agreement matrix can be transformed into an appropriate form by using the Boolean compositions when the equivalence relation is satisfied.

Using ProHits to store, annotate and analyze affinity purification - mass spectrometry (AP-MS) data

PubMed Central

Liu, Guomin; Zhang, Jianping; Choi, Hyungwon; Lambert, Jean-Philippe; Srikumar, Tharan; Larsen, Brett; Nesvizhskii, Alexey I.; Raught, Brian; Tyers, Mike; Gingras, Anne-Claude

2012-01-01

Affinity purification coupled with mass spectrometry (AP-MS) is a robust technique used to identify protein-protein interactions. With recent improvements in sample preparation, and dramatic advances in MS instrumentation speed and sensitivity, this technique is becoming more widely used throughout the scientific community. To meet the needs of research groups both large and small, we have developed software solutions for tracking, scoring and analyzing AP-MS data. Here, we provide details for the installation and utilization of ProHits, a Laboratory Information Management System designed specifically for AP-MS interaction proteomics. This protocol explains: (i) how to install the complete ProHits system, including modules for the management of mass spectrometry files and the analysis of interaction data, and (ii) alternative options for the use of pre-existing search results in simpler versions of ProHits, including a virtual machine implementation of our ProHits Lite software. We also describe how to use the main features of the software to analyze AP-MS data. PMID:22948730

Categorical Regression and Benchmark Dose Software 3.0

EPA Science Inventory

The objective of this full-day course is to provide participants with interactive training on the use of the U.S. Environmental Protection Agency’s (EPA) Benchmark Dose software (BMDS, version 3.0, released fall 2018) and Categorical Regression software (CatReg, version 3.1...

Reliability and Validity of the Turkish Version of the Job Performance Scale Instrument.

PubMed

Harmanci Seren, Arzu Kader; Tuna, Rujnan; Eskin Bacaksiz, Feride

2018-02-01

Objective measurement of the job performance of nursing staff using valid and reliable instruments is important in the evaluation of healthcare quality. A current, valid, and reliable instrument that specifically measures the performance of nurses is required for this purpose. The aim of this study was to determine the validity and reliability of the Turkish version of the Job Performance Instrument. This study used a methodological design and a sample of 240 nurses working at different units in four hospitals in Istanbul, Turkey. A descriptive data form, the Job Performance Scale, and the Employee Performance Scale were used to collect data. Data were analyzed using IBM SPSS Statistics Version 21.0 and LISREL Version 8.51. On the basis of the data analysis, the instrument was revised. Some items were deleted, and subscales were combined. The Turkish version of the Job Performance Instrument was determined to be valid and reliable to measure the performance of nurses. The instrument is suitable for evaluating current nursing roles.

The Infeasibility of Experimental Quantification of Life-Critical Software Reliability

NASA Technical Reports Server (NTRS)

Butler, Ricky W.; Finelli, George B.

1991-01-01

This paper affirms that quantification of life-critical software reliability is infeasible using statistical methods whether applied to standard software or fault-tolerant software. The key assumption of software fault tolerance|separately programmed versions fail independently|is shown to be problematic. This assumption cannot be justified by experimentation in the ultra-reliability region and subjective arguments in its favor are not sufficiently strong to justify it as an axiom. Also, the implications of the recent multi-version software experiments support this affirmation.

Study of fault tolerant software technology for dynamic systems

NASA Technical Reports Server (NTRS)

Caglayan, A. K.; Zacharias, G. L.

1985-01-01

The major aim of this study is to investigate the feasibility of using systems-based failure detection isolation and compensation (FDIC) techniques in building fault-tolerant software and extending them, whenever possible, to the domain of software fault tolerance. First, it is shown that systems-based FDIC methods can be extended to develop software error detection techniques by using system models for software modules. In particular, it is demonstrated that systems-based FDIC techniques can yield consistency checks that are easier to implement than acceptance tests based on software specifications. Next, it is shown that systems-based failure compensation techniques can be generalized to the domain of software fault tolerance in developing software error recovery procedures. Finally, the feasibility of using fault-tolerant software in flight software is investigated. In particular, possible system and version instabilities, and functional performance degradation that may occur in N-Version programming applications to flight software are illustrated. Finally, a comparative analysis of N-Version and recovery block techniques in the context of generic blocks in flight software is presented.

Constructing graph models for software system development and analysis

NASA Astrophysics Data System (ADS)

Pogrebnoy, Andrey V.

2017-01-01

We propose a concept for creating the instrumentation for functional and structural decisions rationale during the software system (SS) development. We propose to develop SS simultaneously on two models - functional (FM) and structural (SM). FM is a source code of the SS. Adequate representation of the FM in the form of a graph model (GM) is made automatically and called SM. The problem of creating and visualizing GM is considered from the point of applying it as a uniform platform for the adequate representation of the SS source code. We propose three levels of GM detailing: GM1 - for visual analysis of the source code and for SS version control, GM2 - for resources optimization and analysis of connections between SS components, GM3 - for analysis of the SS functioning in dynamics. The paper includes examples of constructing all levels of GM.

ICESat (GLAS) Science Processing Software Document Series. Volume 1; Science Software Management Plan; 3.0

NASA Technical Reports Server (NTRS)

Hancock, David W., III

1999-01-01

This document provides the Software Management Plan for the GLAS Standard Data Software (SDS) supporting the GLAS instrument of the EOS ICESat Spacecraft. The SDS encompasses the ICESat Science Investigator-led Processing System (I-SIPS) Software and the Instrument Support Terminal (IST) Software. For the I-SIPS Software, the SDS will produce Level 0, Level 1, and Level 2 data products as well as the associated product quality assessments and descriptive information. For the IST Software, the SDS will accommodate the GLAS instrument support areas of engineering status, command, performance assessment, and instrument health status.

Automated and Scalable Data Reduction in the textsc{Sofia} Data Processing System

NASA Astrophysics Data System (ADS)

Krzaczek, R.; Shuping, R.; Charcos-Llorens, M.; Alles, R.; Vacca, W.

2015-09-01

In order to provide suitable data products to general investigators and other end users in a timely manner, the Stratospheric Observatory for Infrared Astronomy SOFIA) has developed a framework supporting the automated execution of data processing pipelines for the various instruments, called the Data Processing System (DPS), see Shuping et al. (2014) for overview). The primary requirement is to process all data collected from a flight within eight hours, allowing data quality assessments and inspections to be made the following day. The raw data collected during a flight requires processing by a number of different software packages and tools unique to each combination of instrument and mode of operation, much of it developed in-house, in order to create data products for use by investigators and other end-users. The requirement to deliver these data products in a consistent, predictable, and performant manner presents a significant challenge for the observatory. Herein we present aspects of the DPS that help to achieve these goals. We discuss how it supports data reduction software written in a variety of languages and environments, its support for new versions and live upgrades to that software and other necessary resources (e.g., calibrations), its accommodation of sudden processing loads through the addition (and eventual removal) of computing resources, and close with an observation of the performance achieved in the first two observing cycles of SOFIA.

NAIF Toolkit - Extended

NASA Technical Reports Server (NTRS)

Acton, Charles H., Jr.; Bachman, Nathaniel J.; Semenov, Boris V.; Wright, Edward D.

2010-01-01

The Navigation Ancillary Infor ma tion Facility (NAIF) at JPL, acting under the direction of NASA s Office of Space Science, has built a data system named SPICE (Spacecraft Planet Instrument Cmatrix Events) to assist scientists in planning and interpreting scientific observations (see figure). SPICE provides geometric and some other ancillary information needed to recover the full value of science instrument data, including correlation of individual instrument data sets with data from other instruments on the same or other spacecraft. This data system is used to produce space mission observation geometry data sets known as SPICE kernels. It is also used to read SPICE kernels and to compute derived quantities such as positions, orientations, lighting angles, etc. The SPICE toolkit consists of a subroutine/ function library, executable programs (both large applications and simple utilities that focus on kernel management), and simple examples of using SPICE toolkit subroutines. This software is very accurate, thoroughly tested, and portable to all computers. It is extremely stable and reusable on all missions. Since the previous version, three significant capabilities have been added: Interactive Data Language (IDL) interface, MATLAB interface, and a geometric event finder subsystem.

A flexible computerized system for environmental data acquisition and transmission

NASA Astrophysics Data System (ADS)

Zappalà, G.

2009-04-01

In recent years increasing importance has been addressed to the knowledge of the marine environment, either to help detecting and understanding global climate change phenomena, or to protect and preserve those coastal areas, where multiple interests converge (linked to the tourism, recreational or productive activities…) and which suffer greater impact from anthropogenic activities; this has in turn stimulated the start of research programs devoted to the monitoring and surveillance of these particular zones, coupling the needs for knowledge, sustainable development and exploitation of natural resources. There is an increasing need to have data available in real time or near real time in order to intervene in emergency situations. Cabled or wireless data transmission can be used. The first allows the transmission of a higher amount of data only in coastal sites, while the second gives a bigger flexibility in terms of application to different environments; more, using mobile phone services (either terrestrial or satellite), it is possible to allocate the data centre in the most convenient place, without any need of proximity to the sea. Traditional oceanographic techniques, based on ship surveys, hardly fit the needs of operational oceanography, because of their high cost and fragmentary nature, both in spatial and temporal domains. To obtain a good synopticity, it is necessary to complement traditional ship observations with measurements from fixed stations (buoys moored in sites chosen to be representative of wider areas, or to constitute a sentinel against the arrival of pollutants), satellite observations, use of ships of opportunity and of newly developed instruments, like the gliders, or towed sliding devices, like the SAVE. Modern instruments rely on an electronic heart; an integrated hardware-software system developed in Messina is here presented, used in various versions to control data acquisition and transmission on buoys or on ship-based instrumentation. The data acquisition and transmission system is based on IEEE P996.1 standard boards, implementing a PC-like architecture; basically, it consists in a Pentium family CPU (the fist prototypes used a 40 MHz 386 CPU), a variable number of RS-232 ports to connect measuring instruments and communication devices, an analog to digital converter (8 inputs 12 or 16 bit), power outputs with connected circuit status feedback to drive actuators and switch on and off the measuring systems, satellite and/or cellular phone modem, GPS; the mass storage is supplied by Disk on Chip (DOC) devices. According to the needs, it can be fully or only partly implemented. The software environment is Datalight ROMDOS v. 6, an MS-DOS compatible Operating System. The software has been written in Microsoft Professional Compiled BASIC v. 7.1. and Microsoft Macro Assembler v. 5.0. It enables to fully control the system instruments both in local and remote mode using a special set of macro commands (that can be combined into sequences using a simple text editor) that include also conditional execution of branches; this feature can be very useful in case of partial operativity of the system due, for instance, to low battery level or failure of some instrument. Available commands include: • System management commands • Instrument management commands • Conditional branch commands • Data transmission commands Collected data are locally stored and can be transmitted as e-mails, so increasing their safety against loosing and making the global data path fault tolerant using the peculiarities of the e-mail system. The first version was used in a network of coastal monitoring buoys funded by the Italian SAM program; a second one to equip an automatic multiple launcher for expendable probes to be used in ships of opportunity, designed and built in the framework of an EU funded program, "MFSTEP". Every hour, a "sequence manager" starts a macro-command sequence, that can be different for each time and is remotely reprogrammable; new releases of the software and of the sequences are uploadable to the station without suspending its normal activity. The macro-commands enable to manage the data acquisition and transmission, the mission programming, the station hardware and the measuring instruments. In the "launcher" version the program also controls real time and position acquisition, comparison against set points-times, launch, data acquisition and transmission, ancillary functions. The whole system can be connected to another computer (local laptop or remote desktop) using a terminal software; however, to fully and easily use its capabilities, a remote control program has been written in Microsoft Visual Basic, running in Windows environment. This program enables to transfer files to and from the measuring system, set up all its functionalities, and, if needed, take control of all the system operations. Thanks to the PC-like hardware architecture, it is easy to upgrade the system to more powerful processors without the need to modify the software, which, in turn, can be easily programmed using standard development packages.

Provenance tracking for scientific software toolchains through on-demand release and archiving

NASA Astrophysics Data System (ADS)

Ham, David

2017-04-01

There is an emerging consensus that published computational science results must be backed by a provenance chain tying results to the exact versions of input data and the code which generated them. There is also now an impressive range of web services devoted to revision control of software, and the archiving in citeable form of both software and input data. However, much scientific software itself builds on libraries and toolkits, and these themselves have dependencies. Further, it is common for cutting edge research to depend on the latest version of software in online repositories, rather than the official release version. This creates a situation in which an author who wishes to follow best practice in recording the provenance chain of their results must archive and cite unreleased versions of a series of dependencies. Here, we present an alternative which toolkit authors can easily implement to provide a semi-automatic mechanism for creating and archiving custom software releases of the precise version of a package used in a particular simulation. This approach leverages the excellent services provided by GitHub and Zenodo to generate a connected set of citeable DOIs for the archived software. We present the integration of this workflow into the Firedrake automated finite element framework as a practical example of this approach in use on a complex geoscientific tool chain in practical use.

MathWorks Simulink and C++ integration with the new VLT PLC-based standard development platform for instrument control systems

NASA Astrophysics Data System (ADS)

Kiekebusch, Mario J.; Di Lieto, Nicola; Sandrock, Stefan; Popovic, Dan; Chiozzi, Gianluca

2014-07-01

ESO is in the process of implementing a new development platform, based on PLCs, for upcoming VLT control systems (new instruments and refurbishing of existing systems to manage obsolescence issues). In this context, we have evaluated the integration and reuse of existing C++ libraries and Simulink models into the real-time environment of BECKHOFF Embedded PCs using the capabilities of the latest version of TwinCAT software and MathWorks Embedded Coder. While doing so the aim was to minimize the impact of the new platform by adopting fully tested solutions implemented in C++. This allows us to reuse the in house expertise, as well as extending the normal capabilities of the traditional PLC programming environments. We present the progress of this work and its application in two concrete cases: 1) field rotation compensation for instrument tracking devices like derotators, 2) the ESO standard axis controller (ESTAC), a generic model-based controller implemented in Simulink and used for the control of telescope main axes.

A PC program for estimating measurement uncertainty for aeronautics test instrumentation

NASA Technical Reports Server (NTRS)

Blumenthal, Philip Z.

1995-01-01

A personal computer program was developed which provides aeronautics and operations engineers at Lewis Research Center with a uniform method to quickly provide values for the uncertainty in test measurements and research results. The software package used for performing the calculations is Mathcad 4.0, a Windows version of a program which provides an interactive user interface for entering values directly into equations with immediate display of results. The error contribution from each component of the system is identified individually in terms of the parameter measured. The final result is given in common units, SI units, and percent of full scale range. The program also lists the specifications for all instrumentation and calibration equipment used for the analysis. It provides a presentation-quality printed output which can be used directly for reports and documents.

Software for biomedical engineering signal processing laboratory experiments.

PubMed

Tompkins, Willis J; Wilson, J

2009-01-01

In the early 1990's we developed a special computer program called UW DigiScope to provide a mechanism for anyone interested in biomedical digital signal processing to study the field without requiring any other instrument except a personal computer. There are many digital filtering and pattern recognition algorithms used in processing biomedical signals. In general, students have very limited opportunity to have hands-on access to the mechanisms of digital signal processing. In a typical course, the filters are designed non-interactively, which does not provide the student with significant understanding of the design constraints of such filters nor their actual performance characteristics. UW DigiScope 3.0 is the first major update since version 2.0 was released in 1994. This paper provides details on how the new version based on MATLAB! works with signals, including the filter design tool that is the programming interface between UW DigiScope and processing algorithms.

Design of a Channel Error Simulator using Virtual Instrument Techniques for the Initial Testing of TCP/IP and SCPS Protocols

NASA Technical Reports Server (NTRS)

Horan, Stephen; Wang, Ru-Hai

1999-01-01

There exists a need for designers and developers to have a method to conveniently test a variety of communications parameters for an overall system design. This is no different when testing network protocols as when testing modulation formats. In this report, we discuss a means of providing a networking test device specifically designed to be used for space communications. This test device is a PC-based Virtual Instrument (VI) programmed using the LabVIEW(TM) version 5 software suite developed by National Instruments(TM)TM. This instrument was designed to be portable and usable by others without special, additional equipment. The programming was designed to replicate a VME-based hardware module developed earlier at New Mexico State University (NMSU) and to provide expanded capabilities exceeding the baseline configuration existing in that module. This report describes the design goals for the VI module in the next section and follows that with a description of the design of the VI instrument. This is followed with a description of the validation tests run on the VI. An application of the error-generating VI to networking protocols is then given.

Quantifying Heuristic Bias: Anchoring, Availability, and Representativeness.

PubMed

Richie, Megan; Josephson, S Andrew

2018-01-01

Construct: Authors examined whether a new vignette-based instrument could isolate and quantify heuristic bias. Heuristics are cognitive shortcuts that may introduce bias and contribute to error. There is no standardized instrument available to quantify heuristic bias in clinical decision making, limiting future study of educational interventions designed to improve calibration of medical decisions. This study presents validity data to support a vignette-based instrument quantifying bias due to the anchoring, availability, and representativeness heuristics. Participants completed questionnaires requiring assignment of probabilities to potential outcomes of medical and nonmedical scenarios. The instrument randomly presented scenarios in one of two versions: Version A, encouraging heuristic bias, and Version B, worded neutrally. The primary outcome was the difference in probability judgments for Version A versus Version B scenario options. Of 167 participants recruited, 139 enrolled. Participants assigned significantly higher mean probability values to Version A scenario options (M = 9.56, SD = 3.75) than Version B (M = 8.98, SD = 3.76), t(1801) = 3.27, p = .001. This result remained significant analyzing medical scenarios alone (Version A, M = 9.41, SD = 3.92; Version B, M = 8.86, SD = 4.09), t(1204) = 2.36, p = .02. Analyzing medical scenarios by heuristic revealed a significant difference between Version A and B for availability (Version A, M = 6.52, SD = 3.32; Version B, M = 5.52, SD = 3.05), t(404) = 3.04, p = .003, and representativeness (Version A, M = 11.45, SD = 3.12; Version B, M = 10.67, SD = 3.71), t(396) = 2.28, p = .02, but not anchoring. Stratifying by training level, students maintained a significant difference between Version A and B medical scenarios (Version A, M = 9.83, SD = 3.75; Version B, M = 9.00, SD = 3.98), t(465) = 2.29, p = .02, but not residents or attendings. Stratifying by heuristic and training level, availability maintained significance for students (Version A, M = 7.28, SD = 3.46; Version B, M = 5.82, SD = 3.22), t(153) = 2.67, p = .008, and residents (Version A, M = 7.19, SD = 3.24; Version B, M = 5.56, SD = 2.72), t(77) = 2.32, p = .02, but not attendings. Authors developed an instrument to isolate and quantify bias produced by the availability and representativeness heuristics, and illustrated the utility of their instrument by demonstrating decreased heuristic bias within medical contexts at higher training levels.

USER'S GUIDE: Strategic Waste Minimization Initiative (SWAMI) Version 2.0 - A Software Tool to Aid in Process Analysis for Pollution Prevention

EPA Science Inventory

The Strategic WAste Minimization Initiative (SWAMI) Software, Version 2.0 is a tool for using process analysis for identifying waste minimization opportunities within an industrial setting. The software requires user-supplied information for process definition, as well as materia...

Psychometric Properties of Newly Translated Spanish Life Events Inventory and Daily Hassles Scale.

PubMed

Hannan, Jean; Youngblut, JoAnne M; Brooten, Dorothy; Bazzani, Dianne; Romero, Norma R; Chavez, Blanca; Picanes, Joann

2015-01-01

Measuring stress in Hispanic Americans, the fastest growing U.S. minority, is problematic. The Life Events Inventory (LEI) and the Daily Hassles Scale (DHS), widely used stress instruments, are not available in Spanish. To test the psychometric properties of the translated Spanish versions of the LEI and DHS. A convenience sample of 63 Hispanic women completed both instruments in Spanish and English 2 weeks apart. Internal consistency reliability and stability were strong for both instruments (.85-.97). Reliability and validity evidence for the translated Spanish versions were strong and similar to the English version. Psychometric findings suggest that the newly translated Spanish versions are good representations of the English versions and that these newly translated instruments are ready for use.

OIFITS 2: the 2nd version of the data exchange standard for optical interferometry

NASA Astrophysics Data System (ADS)

Duvert, Gilles; Young, John; Hummel, Christian A.

2017-01-01

This paper describes version 2 of the Optical Interferometry exchange Format (OIFITS), the standard for exchanging calibrated data from optical (visible or infrared) interferometers. This IAU-endorsed standard has been in use for 10 years at most of the past and current optical interferometer projects, including COAST, NPOI, IOTA, CHARA, VLTI, PTI and the Keck interferometer. Software is available for reading, writing and merging OIFITS files. This version 2 provides definitions of additional data tables (for example for polarisation measurements), addressing the needs of future interferometric instruments. Also included are data columns for a more rigorous description of measurement errors and their correlations. In that, this document is a step towards the design of a common data model for optical interferometry. Finally, the main OIFITS header is expanded with several new keywords summarising the content to allow doing data base searches. We request that comments and suggestions related to OIFITS be directed to the OLBIN email list. (See http://www.jmmc.fr/olbin-forum for information on how to subscribe and post to the list.)

Compact Low Power DPU for Plasma Instrument LINA on the Russian Luna-Glob Lander

NASA Astrophysics Data System (ADS)

Schmidt, Walter; Riihelä, Pekka; Kallio, Esa

2013-04-01

The Swedish Institute for Space Physics in Kiruna is bilding a Lunar Ions and Neutrals Analyzer (LINA) for the Russian Luna-Glob lander mission and its orbiter, to be launched around 2016 [1]. The Finnish Meteorological Institute is responsible for designing and building the central data processing units (DPU) for both instruments. The design details were optimized to serve as demonstrator also for a similar instrument on the Jupiter mission JUICE. To accommodate the originally set short development time and to keep the design between orbiter and Lander as similar as possible, the DPU is built around two re-programmable flash-based FPGAs from Actel. One FPGA contains a public-domain 32-bit processor core identical for both Lander and orbiter. The other FPGA handles all interfaces to the spacecraft system and the detectors, somewhat different for both implementations. Monitoring of analog housekeeping data is implemented as an IP-core from Stellamar inside the interface FPGA, saving mass, volume and especially power while simplifying the radiation protection design. As especially on the Lander the data retention before transfer to the orbiter cannot be guaranteed under all conditions, the DPU includes a Flash-PROM containing several software versions and data storage capability. With the memory management implemented inside the interface FPGA, one of the serial links can also be used as test port to verify the system, load the initial software into the Flash-PROM and to control the detector hardware directly without support by the processor and a ready developed operating system and software. Implementation and performance details will be presented. Reference: [1] http://www.russianspaceweb.com/luna_glob_lander.html.

The Validation of a Software Evaluation Instrument.

ERIC Educational Resources Information Center

Schmitt, Dorren Rafael

This study, conducted at six southern universities, analyzed the validity and reliability of a researcher developed instrument designed to evaluate educational software in secondary mathematics. The instrument called the Instrument for Software Evaluation for Educators uses measurement scales, presents a summary section of the evaluation, and…

Flexible Workflow Software enables the Management of an Increased Volume and Heterogeneity of Sensors, and evolves with the Expansion of Complex Ocean Observatory Infrastructures.

NASA Astrophysics Data System (ADS)

Tomlin, M. C.; Jenkyns, R.

2015-12-01

Ocean Networks Canada (ONC) collects data from observatories in the northeast Pacific, Salish Sea, Arctic Ocean, Atlantic Ocean, and land-based sites in British Columbia. Data are streamed, collected autonomously, or transmitted via satellite from a variety of instruments. The Software Engineering group at ONC develops and maintains Oceans 2.0, an in-house software system that acquires and archives data from sensors, and makes data available to scientists, the public, government and non-government agencies. The Oceans 2.0 workflow tool was developed by ONC to manage a large volume of tasks and processes required for instrument installation, recovery and maintenance activities. Since 2013, the workflow tool has supported 70 expeditions and grown to include 30 different workflow processes for the increasing complexity of infrastructures at ONC. The workflow tool strives to keep pace with an increasing heterogeneity of sensors, connections and environments by supporting versioning of existing workflows, and allowing the creation of new processes and tasks. Despite challenges in training and gaining mutual support from multidisciplinary teams, the workflow tool has become invaluable in project management in an innovative setting. It provides a collective place to contribute to ONC's diverse projects and expeditions and encourages more repeatable processes, while promoting interactions between the multidisciplinary teams who manage various aspects of instrument development and the data they produce. The workflow tool inspires documentation of terminologies and procedures, and effectively links to other tools at ONC such as JIRA, Alfresco and Wiki. Motivated by growing sensor schemes, modes of collecting data, archiving, and data distribution at ONC, the workflow tool ensures that infrastructure is managed completely from instrument purchase to data distribution. It integrates all areas of expertise and helps fulfill ONC's mandate to offer quality data to users.

Validation of Malaysian Versions of Perceived Diabetes Self-Management Scale (PDSMS), Medication Understanding and Use Self-Efficacy Scale (MUSE) and 8-Morisky Medication Adherence Scale (MMAS-8) Using Partial Credit Rasch Model.

PubMed

Al Abboud, Safaa Ahmed; Ahmad, Sohail; Bidin, Mohamed Badrulnizam Long; Ismail, Nahlah Elkudssiah

2016-11-01

The Diabetes Mellitus (DM) is a common silent epidemic disease with frequent morbidity and mortality. The psychological and psychosocial health factors are negatively influencing the glycaemic control in diabetic patients. Therefore, various questionnaires were developed to address the psychological and psychosocial well-being of the diabetic patients. Most of these questionnaires were first developed in English and then translated into different languages to make them useful for the local communities. The main aim of this study was to translate and validate the Malaysian versions of Perceived Diabetes Self-Management Scale (PDSMS), Medication Understanding and Use Self-Efficacy Scale (MUSE), and to revalidate 8-Morisky Medication Adherence Scale (MMAS-8) by Partial Credit Rasch Model (Modern Test Theory). Permission was obtained from respective authors to translate the English versions of PDSMS, MUSE and MMAS-8 into Malay language according to established standard international translation guidelines. In this cross-sectional study, 62 adult DM patients were recruited from Hospital Kuala Lumpur by purposive sampling method. The data were extracted from the self-administered questionnaires and entered manually in the Ministeps (Winsteps) software for Partial Credit Rasch Model. The item and person reliability, infit/outfit Z-Standard (ZSTD), infit/outfit Mean Square (MNSQ) and point measure correlation (PTMEA Corr) values were analysed for the reliability analyses and construct validation. The Malay version of PDSMS, MUSE and MMAS-8 found to be valid and reliable instrument for the Malaysian diabetic adults. The instrument showed good overall reliability value of 0.76 and 0.93 for item and person reliability, respectively. The values of infit/outfit ZSTD, infit/outfit MNSQ, and PTMEA Corr were also within the stipulated range of the Rasch Model proving the valid item constructs of the questionnaire. The translated Malay version of PDSMS, MUSE and MMAS-8 was found to be a highly reliable and valid questionnaire by Partial Credit Model. The Malay version was conceptually equivalent to original version, easy to understand and can be used for the Malaysian adult diabetic patients for future studies.

25 CFR 547.12 - What are the minimum technical standards for downloading on a Class II gaming system?

Code of Federal Regulations, 2013 CFR

2013-04-01

... limited to software, files, data, and prize schedules. (2) Downloads must use secure methodologies that... date of the completion of the download; (iii) The Class II gaming system components to which software was downloaded; (iv) The version(s) of download package and any software downloaded. Logging of the...

25 CFR 547.12 - What are the minimum technical standards for downloading on a Class II gaming system?

Code of Federal Regulations, 2014 CFR

2014-04-01

... limited to software, files, data, and prize schedules. (2) Downloads must use secure methodologies that... date of the completion of the download; (iii) The Class II gaming system components to which software was downloaded; (iv) The version(s) of download package and any software downloaded. Logging of the...

GammaLib and ctools. A software framework for the analysis of astronomical gamma-ray data

NASA Astrophysics Data System (ADS)

Knödlseder, J.; Mayer, M.; Deil, C.; Cayrou, J.-B.; Owen, E.; Kelley-Hoskins, N.; Lu, C.-C.; Buehler, R.; Forest, F.; Louge, T.; Siejkowski, H.; Kosack, K.; Gerard, L.; Schulz, A.; Martin, P.; Sanchez, D.; Ohm, S.; Hassan, T.; Brau-Nogué, S.

2016-08-01

The field of gamma-ray astronomy has seen important progress during the last decade, yet to date no common software framework has been developed for the scientific analysis of gamma-ray telescope data. We propose to fill this gap by means of the GammaLib software, a generic library that we have developed to support the analysis of gamma-ray event data. GammaLib was written in C++ and all functionality is available in Python through an extension module. Based on this framework we have developed the ctools software package, a suite of software tools that enables flexible workflows to be built for the analysis of Imaging Air Cherenkov Telescope event data. The ctools are inspired by science analysis software available for existing high-energy astronomy instruments, and they follow the modular ftools model developed by the High Energy Astrophysics Science Archive Research Center. The ctools were written in Python and C++, and can be either used from the command line via shell scripts or directly from Python. In this paper we present the GammaLib and ctools software versions 1.0 that were released at the end of 2015. GammaLib and ctools are ready for the science analysis of Imaging Air Cherenkov Telescope event data, and also support the analysis of Fermi-LAT data and the exploitation of the COMPTEL legacy data archive. We propose using ctools as the science tools software for the Cherenkov Telescope Array Observatory.

NEQAIRv14.0 Release Notes: Nonequilibrium and Equilibrium Radiative Transport Spectra Program

NASA Technical Reports Server (NTRS)

Brandis, Aaron Michael; Cruden, Brett A.

2014-01-01

NEQAIR v14.0 is the first parallelized version of NEQAIR. Starting from the last version of the code that went through the internal software release process at NASA Ames (NEQAIR 2008), there have been significant updates to the physics in the code and the computational efficiency. NEQAIR v14.0 supersedes NEQAIR v13.2, v13.1 and the suite of NEQAIR2009 versions. These updates have predominantly been performed by Brett Cruden and Aaron Brandis from ERC Inc at NASA Ames Research Center in 2013 and 2014. A new naming convention is being adopted with this current release. The current and future versions of the code will be named NEQAIR vY.X. The Y will refer to a major release increment. Minor revisions and update releases will involve incrementing X. This is to keep NEQAIR more in line with common software release practices. NEQAIR v14.0 is a standalone software tool for line-by-line spectral computation of radiative intensities and/or radiative heat flux, with one-dimensional transport of radiation. In order to accomplish this, NEQAIR v14.0, as in previous versions, requires the specification of distances (in cm), temperatures (in K) and number densities (in parts/cc) of constituent species along lines of sight. Therefore, it is assumed that flow quantities have been extracted from flow fields computed using other tools, such as CFD codes like DPLR or LAURA, and that lines of sight have been constructed and written out in the format required by NEQAIR v14.0. There are two principal modes for running NEQAIR v14.0. In the first mode NEQAIR v14.0 is used as a tool for creating synthetic spectra of any desired resolution (including convolution with a specified instrument/slit function). The first mode is typically exercised in simulating/interpreting spectroscopic measurements of different sources (e.g. shock tube data, plasma torches, etc.). In the second mode, NEQAIR v14.0 is used as a radiative heat flux prediction tool for flight projects. Correspondingly, NEQAIR has also been used to simulate the radiance measured on previous flight missions. This report summarizes the database updates, corrections that have been made to the code, changes to input files, parallelization, the current usage recommendations, including test cases, and an indication of the performance enhancements achieved.

A user's guide to Sandia's latin hypercube sampling software : LHS UNIX library/standalone version.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swiler, Laura Painton; Wyss, Gregory Dane

2004-07-01

This document is a reference guide for the UNIX Library/Standalone version of the Latin Hypercube Sampling Software. This software has been developed to generate Latin hypercube multivariate samples. This version runs on Linux or UNIX platforms. This manual covers the use of the LHS code in a UNIX environment, run either as a standalone program or as a callable library. The underlying code in the UNIX Library/Standalone version of LHS is almost identical to the updated Windows version of LHS released in 1998 (SAND98-0210). However, some modifications were made to customize it for a UNIX environment and as a librarymore » that is called from the DAKOTA environment. This manual covers the use of the LHS code as a library and in the standalone mode under UNIX.« less

The predictive information obtained by testing multiple software versions

NASA Technical Reports Server (NTRS)

Lee, Larry D.

1987-01-01

Multiversion programming is a redundancy approach to developing highly reliable software. In applications of this method, two or more versions of a program are developed independently by different programmers and the versions are combined to form a redundant system. One variation of this approach consists of developing a set of n program versions and testing the versions to predict the failure probability of a particular program or a system formed from a subset of the programs. The precision that might be obtained, and also the effect of programmer variability if predictions are made over repetitions of the process of generating different program versions, are examined.

A theoretical basis for the analysis of redundant software subject to coincident errors

NASA Technical Reports Server (NTRS)

Eckhardt, D. E., Jr.; Lee, L. D.

1985-01-01

Fundamental to the development of redundant software techniques fault-tolerant software, is an understanding of the impact of multiple-joint occurrences of coincident errors. A theoretical basis for the study of redundant software is developed which provides a probabilistic framework for empirically evaluating the effectiveness of the general (N-Version) strategy when component versions are subject to coincident errors, and permits an analytical study of the effects of these errors. The basic assumptions of the model are: (1) independently designed software components are chosen in a random sample; and (2) in the user environment, the system is required to execute on a stationary input series. The intensity of coincident errors, has a central role in the model. This function describes the propensity to introduce design faults in such a way that software components fail together when executing in the user environment. The model is used to give conditions under which an N-Version system is a better strategy for reducing system failure probability than relying on a single version of software. A condition which limits the effectiveness of a fault-tolerant strategy is studied, and it is posted whether system failure probability varies monotonically with increasing N or whether an optimal choice of N exists.

GSC configuration management plan

NASA Technical Reports Server (NTRS)

Withers, B. Edward

1990-01-01

The tools and methods used for the configuration management of the artifacts (including software and documentation) associated with the Guidance and Control Software (GCS) project are described. The GCS project is part of a software error studies research program. Three implementations of GCS are being produced in order to study the fundamental characteristics of the software failure process. The Code Management System (CMS) is used to track and retrieve versions of the documentation and software. Application of the CMS for this project is described and the numbering scheme is delineated for the versions of the project artifacts.

Turbo FRMAC 2016 Version 7.1.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fulton, John; Gallagher, Linda K.; Madrid, Gregory J.

2016-08-01

The Turbo FRMAC (TF) software program is the software implementation of the science and methodologies utilized in the Federal Radiological Monitoring and Assessment Center (FRMAC). The software automates the calculations described in volumes 1 of "The Federal Manual for Assessing Environmental Data during a Radiological Emergency" (2015 version). In the event of the intentional or accidental release of radioactive material, the software is used to guide and govern the response of the Federal, State, Local, and Tribal governments. The manual, upon which the software is based, is unclassified and freely available on the Internet.

Latest NASA Instrument Cost Model (NICM): Version VI

NASA Technical Reports Server (NTRS)

Mrozinski, Joe; Habib-Agahi, Hamid; Fox, George; Ball, Gary

2014-01-01

The NASA Instrument Cost Model, NICM, is a suite of tools which allow for probabilistic cost estimation of NASA's space-flight instruments at both the system and subsystem level. NICM also includes the ability to perform cost by analogy as well as joint confidence level (JCL) analysis. The latest version of NICM, Version VI, was released in Spring 2014. This paper will focus on the new features released with NICM VI, which include: 1) The NICM-E cost estimating relationship, which is applicable for instruments flying on Explorer-like class missions; 2) The new cluster analysis ability which, alongside the results of the parametric cost estimation for the user's instrument, also provides a visualization of the user's instrument's similarity to previously flown instruments; and 3) includes new cost estimating relationships for in-situ instruments.

A tool to include gamma analysis software into a quality assurance program.

PubMed

Agnew, Christina E; McGarry, Conor K

2016-03-01

To provide a tool to enable gamma analysis software algorithms to be included in a quality assurance (QA) program. Four image sets were created comprising two geometric images to independently test the distance to agreement (DTA) and dose difference (DD) elements of the gamma algorithm, a clinical step and shoot IMRT field and a clinical VMAT arc. The images were analysed using global and local gamma analysis with 2 in-house and 8 commercially available software encompassing 15 software versions. The effect of image resolution on gamma pass rates was also investigated. All but one software accurately calculated the gamma passing rate for the geometric images. Variation in global gamma passing rates of 1% at 3%/3mm and over 2% at 1%/1mm was measured between software and software versions with analysis of appropriately sampled images. This study provides a suite of test images and the gamma pass rates achieved for a selection of commercially available software. This image suite will enable validation of gamma analysis software within a QA program and provide a frame of reference by which to compare results reported in the literature from various manufacturers and software versions. Copyright © 2015. Published by Elsevier Ireland Ltd.

Smiths Medical Medfusion 3010a syringe pump may overinfuse if software is outdated.

PubMed

2010-04-01

Smiths Medical Medfusion 3010a syringe pumps that aren't equipped with the latest software version (2.0.6) could overinfuse if the "recall last settings" function is used following an infusion in volume/time mode. If your facility has pumps equipped with software versions older than 2.0.6, contact Smiths Medical to obtain an upgrade.

The Development and Validation of a Generic Instrument, QoDoS, for Assessing the Quality of Decision Making.

PubMed

Donelan, Ronan; Walker, Stuart; Salek, Sam

2016-01-01

The impact of decision-making during the development and the regulatory review of medicines greatly influences the delivery of new medicinal products. Currently, there is no generic instrument that can be used to assess the quality of decision-making. This study describes the development of the Quality of Decision-Making Orientation Scheme QoDoS(©) instrument for appraising the quality of decision-making. Semi-structured interviews about decision-making were carried out with 29 senior decision makers from the pharmaceutical industry (10), regulatory authorities (9) and contract research organizations (10). The interviews offered a qualified understanding of the subjective decision-making approach, influences, behaviors and other factors that impact such processes for individuals and organizations involved in the delivery of new medicines. Thematic analysis of the transcribed interviews was carried out using NVivo8® software. Content validity was carried out using qualitative and quantitative data by an expert panel, which led to the developmental version of the QoDoS. Further psychometric evaluations were performed, including factor analysis, item reduction, reliability testing and construct validation. The thematic analysis of the interviews yielded a 94-item initial version of the QoDoS(©) with a 5-point Likert scale. The instrument was tested for content validity using a panel of experts for language clarity, completeness, relevance and scaling, resulting in a favorable agreement by panel members with an intra-class correlation coefficient value of 0.89 (95% confidence interval = 0.56, 0.99). A 76-item QoDoS(©) (version 2) emerged from content validation. Factor analysis produced a 47-item measure with four domains. The 47-item QoDoS(©) (version 3) showed high internal consistency (n = 120, Cronbach's alpha = 0.89), high reproducibility (n = 20, intra-class correlation = 0.77) and a mean completion time of 10 min. Reliability testing and construct validation was successfully performed. The QoDoS(©) is both reliable and valid for use. It has the potential for extensive use in medicines development by both the pharmaceutical industry and regulatory authorities. The QoDoS(©) can be used to assess the quality of decision-making and to inform decision makers of the factors that influence decision-making.

Wide-range structurally optimized channel for monitoring the certified power of small-core reactors

NASA Astrophysics Data System (ADS)

Koshelev, A. S.; Kovshov, K. N.; Ovchinnikov, M. A.; Pikulina, G. N.; Sokolov, A. B.

2016-12-01

The results of tests of a prototype version of a channel for monitoring the certified power of small-core reactors performed at the BR-K1 reactor at the All-Russian Scientific Research Institute of Experimental Physics are reported. An SNM-11 counter and commercial KNK-4 and KNK-3 compensated ion chambers were used as neutron detectors in the tested channel, and certified NCMM and CCMM measurement modules controlled by a PC with specialized software were used as measuring instruments. The specifics of metrological assurance of calibration of the channel in the framework of reactor power monitoring are discussed.

Wide-range structurally optimized channel for monitoring the certified power of small-core reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koshelev, A. S., E-mail: alexsander.coshelev@yandex.ru; Kovshov, K. N.; Ovchinnikov, M. A.

The results of tests of a prototype version of a channel for monitoring the certified power of small-core reactors performed at the BR-K1 reactor at the All-Russian Scientific Research Institute of Experimental Physics are reported. An SNM-11 counter and commercial KNK-4 and KNK-3 compensated ion chambers were used as neutron detectors in the tested channel, and certified NCMM and CCMM measurement modules controlled by a PC with specialized software were used as measuring instruments. The specifics of metrological assurance of calibration of the channel in the framework of reactor power monitoring are discussed.

Translation, validation, and cultural adaptation of the Rhinosinusitis Disability Index and the Chronic Sinusitis Survey into Arabic.

PubMed

Aldrees, Turki; Almubarak, Zaid; Hassouneh, Basil; Albosaily, Ahamed; Aloulah, Mohammad; Almasoud, Mai; Alsaleh, Saad

2018-01-01

Disease-specific quality of life instruments assess the impact of chronic rhinosinusitis on patients' quality of life (QoL). To the extent of our knowledge, there are no Arabic versions of two instruments-the Rhinosinusitis Disability Index (RSDI) and the Chronic Sinusitis Survey (CSS). Develop an Arabic-validated version of both instruments, thus allowing its use among the Arabic population. Prospective cross-sectional study for instrument validation. Tertiary university hospital. This study was conducted between September 2015 and October 2016. We followed the international comprehensive guidelines for translation and cross-cultural adaptation of QoL instruments. Test-retest reliability, discriminant validity, and responsiveness ability of both the RSDI and CSS Arabic versions. 124. The sample comprised 75 patients diagnosed with chronic rhinosinusitis and 49 healthy control subjects. The Arabic version of both instruments showed high internal consistency (Cronbach's alpha: RSDI=0.97, CSS=.88) and the ability to differentiate between diseased and healthy volunteers (P less than .0001). The translated versions also detected significant change in response to an intervention (P less than .0001). These Arabic validated versions of the RSDI and CSS can be used for both clinical and research purposes. This study was performed in only one tertiary hospital. None.

Numerical Arc Segmentation Algorithm for a Radio Conference-NASARC (version 4.0) technical manual

NASA Technical Reports Server (NTRS)

Whyte, Wayne A., Jr.; Heyward, Ann O.; Ponchak, Denise S.; Spence, Rodney L.; Zuzek, John E.

1988-01-01

The information contained in the NASARC (Version 4.0) Technical Manual and NASARC (Version 4.0) User's Manual relates to the Numerical Arc Segmentation Algorithm for a Radio Conference (NASARC) software development through November 1, 1988. The Technical Manual describes the NASARC concept and the algorithms used to implement the concept. The User's Manual provides information on computer system considerations, installation instructions, description of input files, and program operation instructions. Significant revisions were incorporated in the Version 4.0 software over prior versions. These revisions have further enhanced the modeling capabilities of the NASARC procedure and provide improved arrangements of predetermined arcs within the geostationary orbits. Array dimensions within the software were structured to fit within the currently available 12 megabyte memory capacity of the International Frequency Registration Board (IFRB) computer facility. A piecewise approach to predetermined arc generation in NASARC (Version 4.0) allows worldwide planning problem scenarios to be accommodated within computer run time and memory constraints with enhanced likelihood and ease of solution.

IGT-Open: An open-source, computerized version of the Iowa Gambling Task.

PubMed

Dancy, Christopher L; Ritter, Frank E

2017-06-01

The Iowa Gambling Task (IGT) is commonly used to understand the processes involved in decision-making. Though the task was originally run without a computer, using a computerized version of the task has become typical. These computerized versions of the IGT are useful, because they can make the task more standardized across studies and allow for the task to be used in environments where a physical version of the task may be difficult or impossible to use (e.g., while collecting brain imaging data). Though these computerized versions of the IGT have been useful for experimentation, having multiple software implementations of the task could present reliability issues. We present an open-source software version of the Iowa Gambling Task (called IGT-Open) that allows for millisecond visual presentation accuracy and is freely available to be used and modified. This software has been used to collect data from human subjects and also has been used to run model-based simulations with computational process models developed to run in the ACT-R architecture.

CMMI (registered trademark) for Services, Version 1.2

DTIC Science & Technology

2009-02-01

background in information technology, especially those familiar with disciplines like service - oriented architecture (SOA) or software as a service ( SaaS ). In... services , the Software Engineering Institute (SEI) has found several dimensions that an organization can focus on to improve its business. Figure...International Business Machines) and the SEI [Humphrey 1989]. Humphrey’s book, Managing the Software Process, provides a CMMI for Services Version 1.2

Scout 2008 Version 1.0 User Guide

EPA Science Inventory

The Scout 2008 version 1.0 software package provides a wide variety of classical and robust statistical methods that are not typically available in other commercial software packages. A major part of Scout deals with classical, robust, and resistant univariate and multivariate ou...

Impact of sound production by wind instruments on the temporomandibular system of male instrumentalists.

PubMed

Pampel, Michael; Jakstat, Holger A; Ahlers, Oliver M

2014-01-01

Playing a wind instrument can be either a reason for overuse or a protecting factor against certain diseases. Some individuals have many findings but low morbidity while others have few findings but high morbidity. This contradictory phenomenon should be researched. The temporomandibular system (TMS) is a functional unit which comprises the mandible, associated muscles and bilateral joints with the temporal bone. The TMS is responsible for the generation of sound when wind instruments are played. Over the long-term and with intensive usage, this causes changes in the musculature and in the temporomandibular joint (TMJ) of wind musicians, often resulting in temporomandibular disorders (TMD). The aim of this study is to examine evidence that TMD constitute an occupational disease in wind musicians. TMD patients and wind musicians were examined by dental clinical functional analysis. 102 male subjects were divided into three groups: "healthy" individuals, wind musicians, and patients with TMD. Dental Examination was carried out based on focused inclusion of the research diagnostic criteria - TMD [1,7]. Findings were evaluated for statistical significance by first transferring data into a digital database [2,15], then generating T-Test und Wilcoxon-Test when non-Gaussian distribution appears and applying the Mann-Whitney rank sum test using Sigmaplot Version 1.1 software (Systat Software Inc, Washington, USA). The evaluation revealed that wind instrument musicians show a high incidence of developing TMD as the researchers found almost 100% morbidity regarding parafunctional habits and preauricular muscle pain of each adult and highly active musician. The result is highly significant (p< 0.001) for protrusion distance of the mandible. A higher prevalence of functional disorders of the musculoskeletal system has previously been demonstrated in wind musicians. New research results and the typical functions of various wind instruments provide evidence that playing a wind instrument generates occupational risks to the TMS.

The validity and reliability of a Spanish version of the summary of diabetes self-care activities questionnaire.

PubMed

Vincent, Deborah; McEwen, Marylyn M; Pasvogel, Alice

2008-01-01

Translation of data collection instruments, paying careful attention to equivalency between the source and the target language, is important to obtain valid data collection instruments. To translate the Summary of Diabetes Self-Care Activities (SDSCA) questionnaire (English) into Spanish and to evaluate the reliability and validity of the Spanish version. Translation and back-translation were used to develop the Spanish version of the SDSCA. The Spanish version of the SDSCA was reviewed by an expert panel for conceptual and content equivalence to the English version. Psychometric properties were assessed further by combining data from three studies that used the Spanish version as a data collection instrument. Correlation of each item of the Spanish and English version of the SDSCA instrument ranged from .78 to 1.00, with no variability in the responses of 2 of the 12 items. Test-retest correlations for the SDSCA ranged from .51 to 1.00. Internal consistency (Cronbach's alpha) for the Spanish version was .68. Items loaded on three factors, with the factors accounting for 61% of the variance in SDSCA. The findings for the psychometric properties of the Spanish version of the SDSCA questionnaire suggest that it has conceptual and content equivalency with the original English version and is valid and reliable. However, further testing with larger samples is required.

The South African Astronomical Observatory instrumentation software architecture and the SHOC instruments

NASA Astrophysics Data System (ADS)

van Gend, Carel; Lombaard, Briehan; Sickafoose, Amanda; Whittal, Hamish

2016-07-01

Until recently, software for instruments on the smaller telescopes at the South African Astronomical Observatory (SAAO) has not been designed for remote accessibility and frequently has not been developed using modern software best-practice. We describe a software architecture we have implemented for use with new and upgraded instruments at the SAAO. The architecture was designed to allow for multiple components and to be fast, reliable, remotely- operable, support different user interfaces, employ as much non-proprietary software as possible, and to take future-proofing into consideration. Individual component drivers exist as standalone processes, communicating over a network. A controller layer coordinates the various components, and allows a variety of user interfaces to be used. The Sutherland High-speed Optical Cameras (SHOC) instruments incorporate an Andor electron-multiplying CCD camera, a GPS unit for accurate timing and a pair of filter wheels. We have applied the new architecture to the SHOC instruments, with the camera driver developed using Andor's software development kit. We have used this to develop an innovative web-based user-interface to the instrument.

Software Design Description for the Polar Ice Prediction System (PIPS) Version 3.0

DTIC Science & Technology

2008-11-05

Naval Research Laboratory Stennis Space Center, MS 39529-5004 NRL/MR/7320--08-9150 Approved for public release; distribution is unlimited. Software ...collection of information, including suggestions for reducing this burden to Department of Defense, Washington Headquarters Services , Directorate for...THIS PAGE 18. NUMBER OF PAGES 17. LIMITATION OF ABSTRACT Software Design Description for the Polar Ice Prediction System (PIPS) Version 3.0 Pamela G

Software Design Description for the Navy Coastal Ocean Model (NCOM) Version 4.0

DTIC Science & Technology

2008-12-31

Naval Research Laboratory Stennis Space Center, MS 39529-5004 NRL/MR/7320--08-9149 Approved for public release; distribution is unlimited. Software ...suggestions for reducing this burden to Department of Defense, Washington Headquarters Services , Directorate for Information Operations and Reports (0704...LIMITATION OF ABSTRACT Software Design Description for the Navy Coastal Ocean Model (NCOM) Version 4.0 Paul Martin, Charlie N. Barron, Lucy F

What is meant by Format Version? Product Version? Collection?

Atmospheric Science Data Center

2017-10-12

The format Version is used to distinguish between software deliveries to ASDC that result in a product format change. The format version is given in the MISR data file name using the designator _Fnn_ where nn is the version number. ...

Evaluation and optimization of lidar temperature analysis algorithms using simulated data

NASA Technical Reports Server (NTRS)

Leblanc, Thierry; McDermid, I. Stuart; Hauchecorne, Alain; Keckhut, Philippe

1998-01-01

The middle atmosphere (20 to 90 km altitude) ha received increasing interest from the scientific community during the last decades, especially since such problems as polar ozone depletion and climatic change have become so important. Temperature profiles have been obtained in this region using a variety of satellite-, rocket-, and balloon-borne instruments as well as some ground-based systems. One of the more promising of these instruments, especially for long-term high resolution measurements, is the lidar. Measurements of laser radiation Rayleigh backscattered, or Raman scattered, by atmospheric air molecules can be used to determine the relative air density profile and subsequently the temperature profile if it is assumed that the atmosphere is in hydrostatic equilibrium and follows the ideal gas law. The high vertical and spatial resolution make the lidar a well adapted instrument for the study of many middle atmospheric processes and phenomena as well as for the evaluation and validation of temperature measurements from satellites, such as the Upper Atmosphere Research Satellite (UARS). In the Network for Detection of Stratospheric Change (NDSC) lidar is the core instrument for measuring middle atmosphere temperature profiles. Using the best lidar analysis algorithm possible is therefore of crucial importance. In this work, the JPL and CNRS/SA lidar analysis software were evaluated. The results of this evaluation allowed the programs to be corrected and optimized and new production software versions were produced. First, a brief description of the lidar technique and the method used to simulate lidar raw-data profiles from a given temperature profile is presented. Evaluation and optimization of the JPL and CNRS/SA algorithms are then discussed.

The U.S./IAEA Workshop on Software Sustainability for Safeguards Instrumentation: Report to the NNSA DOE Office of International Nuclear Safeguards (NA-241)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pepper, Susan E.; Pickett, Chris A.; Queirolo, Al

The U.S Department of Energy (DOE) National Nuclear Security Administration (NNSA) Next Generation Safeguards Initiative (NGSI) and the International Atomic Energy Agency (IAEA) convened a workshop on Software Sustainability for Safeguards Instrumentation in Vienna, Austria, May 6-8, 2014. Safeguards instrumentation software must be sustained in a changing environment to ensure existing instruments can continue to perform as designed, with improved security. The approaches to the development and maintenance of instrument software used in the past may not be the best model for the future and, therefore, the organizers’ goal was to investigate these past approaches and to determine an optimalmore » path forward. The purpose of this report is to provide input for the DOE NNSA Office of International Nuclear Safeguards (NA-241) and other stakeholders that can be utilized when making decisions related to the development and maintenance of software used in the implementation of international nuclear safeguards. For example, this guidance can be used when determining whether to fund the development, upgrade, or replacement of a particular software product. The report identifies the challenges related to sustaining software, and makes recommendations for addressing these challenges, supported by summaries and detailed notes from the workshop discussions. In addition the authors provide a set of recommendations for institutionalizing software sustainability practices in the safeguards community. The term “software sustainability” was defined for this workshop as ensuring that safeguards instrument software and algorithm functionality can be maintained efficiently throughout the instrument lifecycle, without interruption and providing the ability to continue to improve that software as needs arise.« less

All-Ages Lead Model (Aalm) Version 1.05 (External Draft Report)

EPA Science Inventory

The All-Ages Lead Model (AALM) Version 1.05, is an external review draft software and guidance manual. EPA released this software and associated documentation for public review and comment beginning September 27, 2005, until October 27, 2005. The public comments will be accepte...

GeoGebra 3D from the Perspectives of Elementary Pre-Service Mathematics Teachers Who Are Familiar with a Number of Software Programs

ERIC Educational Resources Information Center

Baltaci, Serdal; Yildiz, Avni

2015-01-01

Each new version of the GeoGebra dynamic mathematics software goes through updates and innovations. One of these innovations is the GeoGebra 5.0 version. This version aims to facilitate 3D instruction by offering opportunities for students to analyze 3D objects. While scanning the previous studies of GeoGebra 3D, it is seen that they mainly focus…

Cross-cultural adaptation of the Brazilian version of the Vocal Fatigue Index - VFI.

PubMed

Zambon, Fabiana; Moreti, Felipe; Nanjundeswaran, Chayadevie; Behlau, Mara

2017-03-13

The purpose of this study was to perform the cultural adaptation of the Brazilian version of the Vocal Fatigue Index (VFI). Two Brazilian bilingual speech-language pathologists (SLP) translated the original version of the VFI in English into Portuguese. The translations were reviewed by a committee of five voice specialist SLPs resulting in the final version of the instrument. A third bilingual SLP back-translated this final version and the same committee reviewed the differences from its original version. The final Portuguese version of the VFI, as in the original English version, was answered on a categorical scale of 0-4 indicating the frequency they experience the symptoms: 0=never, 1=almost never, 2=sometimes, 3=almost always, and 4=always. For cultural equivalence of the Portuguese version, the option "not applicable" was added to the categorical scale and 20 individuals with vocal complaints and dysphonia completed the index. Questions considered "not applicable" would be disregarded from the Brazilian version of the protocol; no question had to be removed from the instrument. The Brazilian Portuguese version was entitled "Índice de Fadiga Vocal - IFV" and features 19 questions, equivalent to the original instrument. Of the 19 items, 11 were related with tiredness of voice and voice avoidance, five concerned physical discomfort associated with voicing, and three were related to improvement of symptoms with rest or lack thereof. The Brazilian version of the VFI presents cultural and linguistic equivalence to the original instrument. The IFV validation into Brazilian Portuguese is in progress.

Numerical Arc Segmentation Algorithm for a Radio Conference (NASARC), version 4.0: User's manual

NASA Technical Reports Server (NTRS)

Whyte, Wayne A., Jr.; Heyward, Ann O.; Ponchak, Denise S.; Spence, Rodney L.; Zuzek, John E.

1988-01-01

The information in the NASARC (Version 4.0) Technical Manual (NASA-TM-101453) and NASARC (Version 4.0) User's Manual (NASA-TM-101454) relates to the state of Numerical Arc Segmentation Algorithm for a Radio Conference (NASARC) software development through November 1, 1988. The Technical Manual describes the NASARC concept and the algorithms used to implement the concept. The User's Manual provides information on computer system considerations, installation instructions, description of input files, and program operation instructions. Significant revisions were incorporated in the Version 4.0 software over prior versions. These revisions have further enhanced the modeling capabilities of the NASARC procedure and provide improved arrangements of predetermined arcs within the geostationary orbit. Array dimensions within the software were structured to fit within the currently available 12-megabyte memory capacity of the International Frequency Registration Board (IFRB) computer facility. A piecewise approach to predetermined arc generation in NASARC (Version 4.) allows worldwide planning problem scenarios to be accommodated within computer run time and memory constraints with enhanced likelihood and ease of solution.

Numerical Arc Segmentation Algorithm for a Radio Conference-NASARC, Version 2.0: User's Manual

NASA Technical Reports Server (NTRS)

Whyte, Wayne A., Jr.; Heyward, Ann O.; Ponchak, Denise S.; Spence, Rodney L.; Zuzek, John E.

1987-01-01

The information contained in the NASARC (Version 2.0) Technical Manual (NASA TM-100160) and the NASARC (Version 2.0) User's Manual (NASA TM-100161) relates to the state of the Numerical Arc Segmentation Algorithm for a Radio Conference (NASARC) software development through October 16, 1987. The technical manual describes the NASARC concept and the algorithms which are used to implement it. The User's Manual provides information on computer system considerations, installation instructions, description of input files, and program operation instructions. Significant revisions have been incorporated in the Version 2.0 software over prior versions. These revisions have enhanced the modeling capabilities of the NASARC procedure while greatly reducing the computer run time and memory requirements. Array dimensions within the software have been structured to fit into the currently available 6-megabyte memory capacity of the International Frequency Registration Board (IFRB) computer facility. A piecewise approach to predetermined arc generation in NASARC (Version 2.0) allows worldwide scenarios to be accommodated within these memory constraints while at the same time reducing computer run time.

Source Code Analysis Laboratory (SCALe) for Energy Delivery Systems

DTIC Science & Technology

2010-12-01

the software for reevaluation. Once the ree- valuation process is completed, CERT provides the client a report detailing the software’s con - formance...Flagged Nonconformities (FNC) Software System TP/FNC Ratio Mozilla Firefox version 2.0 6/12 50% Linux kernel version 2.6.15 10/126 8% Wine...inappropriately tuned for analysis of the Linux kernel, which has anomalous results. Customizing SCALe to work with energy system software will help

RESULTS OF QA/QC TESTING OF EPA BENCHMARK DOSE SOFTWARE VERSION 1.2

EPA Science Inventory

EPA is developing benchmark dose software (BMDS) to support cancer and non-cancer dose-response assessments. Following the recent public review of BMDS version 1.1b, EPA developed a Hill model for evaluating continuous data, and improved the user interface and Multistage, Polyno...

Making Enzyme Kinetics Dynamic via Simulation Software

ERIC Educational Resources Information Center

Potratz, Jeffrey P.

2017-01-01

An interactive classroom demonstration that enhances students' knowledge of steady-state and Michaelis-Menten enzyme kinetics is described. The instructor uses a free version of professional-quality KinTek Explorer simulation software and student input to construct dynamic versions of three static hallmark images commonly used to introduce enzyme…

Implementing Simulation Design of Experiments and Remote Execution on a High Performance Computing Cluster

DTIC Science & Technology

2007-09-01

example, an application developed in Sun’s Netbeans [2007] integrated development environment (IDE) uses Swing class object for graphical user... Netbeans Version 5.5.1 [Computer Software]. Santa Clara, CA: Sun Microsystems. Process Modeler Version 7.0 [Computer Software]. Santa Clara, Ca

Making Sense of Remotely Sensed Ultra-Spectral Infrared Data

NASA Technical Reports Server (NTRS)

2001-01-01

NASA's Jet Propulsion Laboratory (JPL), Pasadena, California, Earth Observing System (EOS) programs, the Deep Space Network (DSN), and various Department of Defense (DOD) technology demonstration programs, combined their technical expertise to develop SEASCRAPE, a software program that obtains data when thermal infrared radiation passes through the Earth's atmosphere and reaches a sensor. Licensed by the California Institute of Technology (Caltech), SEASCRAPE automatically inverts complex infrared data and makes it possible to obtain estimates of the state of the atmosphere along the ray path. Former JPL staff members created a small entrepreneurial firm, Remote Sensing Analysis Systems, Inc., of Altadena, California, to commercialize the product. The founders believed that a commercial version of the software was needed for future U.S. government missions and the commercial monitoring of pollution. With the inversion capability of this software and remote sensing instrumentation, it is possible to monitor pollution sources from safe and secure distances on a noninterfering, noncooperative basis. The software, now know as SEASCRAPE_Plus, allows the user to determine the presence of pollution products, their location and their abundance along the ray path. The technology has been cleared by the Department of Commerce for export, and is currently used by numerous research and engineering organizations around the world.

JavaGenes Molecular Evolution

NASA Technical Reports Server (NTRS)

Lohn, Jason; Smith, David; Frank, Jeremy; Globus, Al; Crawford, James

2007-01-01

JavaGenes is a general-purpose, evolutionary software system written in Java. It implements several versions of a genetic algorithm, simulated annealing, stochastic hill climbing, and other search techniques. This software has been used to evolve molecules, atomic force field parameters, digital circuits, Earth Observing Satellite schedules, and antennas. This version differs from version 0.7.28 in that it includes the molecule evolution code and other improvements. Except for the antenna code, JaveGenes is available for NASA Open Source distribution.

Approaches in highly parameterized inversion—PEST++ Version 3, a Parameter ESTimation and uncertainty analysis software suite optimized for large environmental models

USGS Publications Warehouse

Welter, David E.; White, Jeremy T.; Hunt, Randall J.; Doherty, John E.

2015-09-18

The PEST++ Version 3 software suite can be compiled for Microsoft Windows®4 and Linux®5 operating systems; the source code is available in a Microsoft Visual Studio®6 2013 solution; Linux Makefiles are also provided. PEST++ Version 3 continues to build a foundation for an open-source framework capable of producing robust and efficient parameter estimation tools for large environmental models.

UTM TCL 2.0 Software Version Description (SVD) Document

NASA Technical Reports Server (NTRS)

Mcguirk, Patrick

2017-01-01

This is the Unmanned Aircraft Systems (UAS) Traffic Management (UTM) Technical Capability Level(TCL) 2.0 Software Version Description (SVD) document. This UTM TCL 2.0 SVD describes the following four topics: 1. Software Release Contents: A listing of the files comprising this release 2. Installation Instructions: How to install the release and get it running 3. Changes Since Previous Release: General updates since the previous UTM release 4. Known Issues: Known issues and limitations in this release

Modules for Experiments in Stellar Astrophysics (MESA): Convective Boundaries, Element Diffusion, and Massive Star Explosions

NASA Astrophysics Data System (ADS)

Paxton, Bill; Schwab, Josiah; Bauer, Evan B.; Bildsten, Lars; Blinnikov, Sergei; Duffell, Paul; Farmer, R.; Goldberg, Jared A.; Marchant, Pablo; Sorokina, Elena; Thoul, Anne; Townsend, Richard H. D.; Timmes, F. X.

2018-02-01

We update the capabilities of the software instrument Modules for Experiments in Stellar Astrophysics (MESA) and enhance its ease of use and availability. Our new approach to locating convective boundaries is consistent with the physics of convection, and yields reliable values of the convective-core mass during both hydrogen- and helium-burning phases. Stars with M< 8 M⊙ become white dwarfs and cool to the point where the electrons are degenerate and the ions are strongly coupled, a realm now available to study with MESA due to improved treatments of element diffusion, latent heat release, and blending of equations of state. Studies of the final fates of massive stars are extended in MESA by our addition of an approximate Riemann solver that captures shocks and conserves energy to high accuracy during dynamic epochs. We also introduce a 1D capability for modeling the effects of Rayleigh-Taylor instabilities that, in combination with the coupling to a public version of the STELLA radiation transfer instrument, creates new avenues for exploring Type II supernova properties. These capabilities are exhibited with exploratory models of pair-instability supernovae, pulsational pair-instability supernovae, and the formation of stellar-mass black holes. The applicability of MESA is now widened by the capability to import multidimensional hydrodynamic models into MESA. We close by introducing software modules for handling floating point exceptions and stellar model optimization, as well as four new software tools - MESA-Web, MESA-Docker, pyMESA, and mesastar.org - to enhance MESA's education and research impact.

A generic readout system for astrophysical detectors

NASA Astrophysics Data System (ADS)

Doumayrou, E.; Lortholary, M.

2012-09-01

We have developed a generic digital platform to fulfill the needs for the development of new detectors in astrophysics, which is used in lab, for ground-based telescopes instruments and also in prototype versions for space instruments development. This system is based on hardware FPGA electronic board (called MISE) together with software on a PC computer (called BEAR). The MISE board generates the fast clocking which reads the detectors thanks to a programmable digital sequencer and performs data acquisition, buffering of digitalized pixels outputs and interfaces with others boards. The data are then sent to the PC via a SpaceWire or Usb link. The BEAR software sets the MISE board up, makes data acquisition and enables the visualization, processing and the storage of data in line. These software tools are made of C++ and Labview (NI) on a Linux OS. MISE and BEAR make a generic acquisition architecture, on which dedicated analog boards are plugged, so that to accommodate with detectors specificity: number of pixels, the readout channels and frequency, analog bias and clock interfaces. We have used this concept to build a camera for the P-ARTEMIS project including a 256 pixels sub-millimeter bolometer detector at 10Kpixel/s (SPIE 7741-12 (2010)). For the EUCLID project, a lab camera is now working for the test of CCDs 4Mpixels at 4*200Kpixel/s. Another is working for the testing of new near infrared detectors (NIR LFSA for the ESA TRP program) 110Kpixels at 2*100Kpixels/s. Other projects are in progress for the space missions PLATO and SPICA.

Computer Simulation Modeling: A Method for Predicting the Utilities of Alternative Computer-Aided Treat Evaluation Algorithms

DTIC Science & Technology

1990-09-01

1988). Current versions of the ADATS have CATE systems insLzlled, but the software is still under development by the radar manufacturer, Contraves ...Italiana, a subcontractor to Martin Marietta (USA). Contraves Italiana will deliver the final version of the software to Martin Marietta in 1991. Until then

A Review of DIMPACK Version 1.0: Conditional Covariance-Based Test Dimensionality Analysis Package

ERIC Educational Resources Information Center

Deng, Nina; Han, Kyung T.; Hambleton, Ronald K.

2013-01-01

DIMPACK Version 1.0 for assessing test dimensionality based on a nonparametric conditional covariance approach is reviewed. This software was originally distributed by Assessment Systems Corporation and now can be freely accessed online. The software consists of Windows-based interfaces of three components: DIMTEST, DETECT, and CCPROX/HAC, which…

New Cerec software version 4.3 for Omnicam and Bluecam.

PubMed

Fritzsche, G; Schenk, O

2014-01-01

The introduction of the Cerec Omnicam acquisition unit in September 2012 presented Sirona with a challenge: con- figuring the existing software version 4 for both the exist- ing Bluecam, which uses still images, and the video-based Omnicam. Sirona has succeeded in making all the features introduced in version 4.2 (such as the virtual articulator or implant-supported single-tooth restorations, both monolithic and two-part designs) work with both camera types, without compromising the uniform, homogeneous look and feel of the software. The virtual articulator (Figs 1a to 1c) now has even more individual configuration options and allows the setting of almost all angles derived from the individual transfer bow based on precalculated average values. The new software version 4.3, presented in July 2014, fixes some minor bugs, such as the time-consuming "empty grinding" after necessary water changes during the grinding process, but also includes many features that noticeably ease the workflow. For example, the important scanning precision in the region of the anterior incisal edges has been improved, which makes the scanning process more reliable, faster, and far more comfortable.

A second generation experiment in fault-tolerant software

NASA Technical Reports Server (NTRS)

Knight, J. C.

1986-01-01

Information was collected on the efficacy of fault-tolerant software by conducting two large-scale controlled experiments. In the first, an empirical study of multi-version software (MVS) was conducted. The second experiment is an empirical evaluation of self testing as a method of error detection (STED). The purpose ot the MVS experiment was to obtain empirical measurement of the performance of multi-version systems. Twenty versions of a program were prepared at four different sites under reasonably realistic development conditions from the same specifications. The purpose of the STED experiment was to obtain empirical measurements of the performance of assertions in error detection. Eight versions of a program were modified to include assertions at two different sites under controlled conditions. The overall structure of the testing environment for the MVS experiment and its status are described. Work to date in the STED experiment is also presented.

Earth Observing System (EOS)/Advanced Microwave Sounding Unit-A (AMSU-A) software assurance plan

NASA Technical Reports Server (NTRS)

Schwantje, Robert; Smith, Claude

1994-01-01

This document defines the responsibilities of Software Quality Assurance (SOA) for the development of the flight software installed in EOS/AMSU-A instruments, and the ground support software used in the test and integration of the EOS/AMSU-A instruments.

Modeling and Grid Generation of Iced Airfoils

NASA Technical Reports Server (NTRS)

Vickerman, Mary B.; Baez, Marivell; Braun, Donald C.; Hackenberg, Anthony W.; Pennline, James A.; Schilling, Herbert W.

2007-01-01

SmaggIce Version 2.0 is a software toolkit for geometric modeling and grid generation for two-dimensional, singleand multi-element, clean and iced airfoils. A previous version of SmaggIce was described in Preparing and Analyzing Iced Airfoils, NASA Tech Briefs, Vol. 28, No. 8 (August 2004), page 32. To recapitulate: Ice shapes make it difficult to generate quality grids around airfoils, yet these grids are essential for predicting ice-induced complex flow. This software efficiently creates high-quality structured grids with tools that are uniquely tailored for various ice shapes. SmaggIce Version 2.0 significantly enhances the previous version primarily by adding the capability to generate grids for multi-element airfoils. This version of the software is an important step in streamlining the aeronautical analysis of ice airfoils using computational fluid dynamics (CFD) tools. The user may prepare the ice shape, define the flow domain, decompose it into blocks, generate grids, modify/divide/merge blocks, and control grid density and smoothness. All these steps may be performed efficiently even for the difficult glaze and rime ice shapes. Providing the means to generate highly controlled grids near rough ice, the software includes the creation of a wrap-around block (called the "viscous sublayer block"), which is a thin, C-type block around the wake line and iced airfoil. For multi-element airfoils, the software makes use of grids that wrap around and fill in the areas between the viscous sub-layer blocks for all elements that make up the airfoil. A scripting feature records the history of interactive steps, which can be edited and replayed later to produce other grids. Using this version of SmaggIce, ice shape handling and grid generation can become a practical engineering process, rather than a laborious research effort.

MARZ: Manual and automatic redshifting software

NASA Astrophysics Data System (ADS)

Hinton, S. R.; Davis, Tamara M.; Lidman, C.; Glazebrook, K.; Lewis, G. F.

2016-04-01

The Australian Dark Energy Survey (OzDES) is a 100-night spectroscopic survey underway on the Anglo-Australian Telescope using the fibre-fed 2-degree-field (2dF) spectrograph. We have developed a new redshifting application MARZ with greater usability, flexibility, and the capacity to analyse a wider range of object types than the RUNZ software package previously used for redshifting spectra from 2dF. MARZ is an open-source, client-based, Javascript web-application which provides an intuitive interface and powerful automatic matching capabilities on spectra generated from the AAOmega spectrograph to produce high quality spectroscopic redshift measurements. The software can be run interactively or via the command line, and is easily adaptable to other instruments and pipelines if conforming to the current FITS file standard is not possible. Behind the scenes, a modified version of the AUTOZ cross-correlation algorithm is used to match input spectra against a variety of stellar and galaxy templates, and automatic matching performance for OzDES spectra has increased from 54% (RUNZ) to 91% (MARZ). Spectra not matched correctly by the automatic algorithm can be easily redshifted manually by cycling automatic results, manual template comparison, or marking spectral features.

The GLAS Science Algorithm Software (GSAS) Detailed Design Document Version 6. Volume 16

NASA Technical Reports Server (NTRS)

Lee, Jeffrey E.

2013-01-01

The Geoscience Laser Altimeter System (GLAS) is the primary instrument for the ICESat (Ice, Cloud and Land Elevation Satellite) laser altimetry mission. ICESat was the benchmark Earth Observing System (EOS) mission for measuring ice sheet mass balance, cloud and aerosol heights, as well as land topography and vegetation characteristics. From 2003 to 2009, the ICESat mission provided multi-year elevation data needed to determine ice sheet mass balance as well as cloud property information, especially for stratospheric clouds common over polar areas. It also provided topography and vegetation data around the globe, in addition to the polar-specific coverage over the Greenland and Antarctic ice sheets.This document describes the detailed design of GLAS Science Algorithm Software (GSAS). The GSAS is used to create the ICESat GLAS standard data products. The National Snow and Ice Data Center (NSDIC) distribute these products. The document contains descriptions, flow charts, data flow diagrams, and structure charts for each major component of the GSAS. The purpose of this document is to present the detailed design of the GSAS. It is intended as a reference source to assist the maintenance programmer in making changes that fix or enhance the documented software.

DSN Array Simulator

NASA Technical Reports Server (NTRS)

Tikidjian, Raffi; Mackey, Ryan

2008-01-01

The DSN Array Simulator (wherein 'DSN' signifies NASA's Deep Space Network) is an updated version of software previously denoted the DSN Receive Array Technology Assessment Simulation. This software (see figure) is used for computational modeling of a proposed DSN facility comprising user-defined arrays of antennas and transmitting and receiving equipment for microwave communication with spacecraft on interplanetary missions. The simulation includes variations in spacecraft tracked and communication demand changes for up to several decades of future operation. Such modeling is performed to estimate facility performance, evaluate requirements that govern facility design, and evaluate proposed improvements in hardware and/or software. The updated version of this software affords enhanced capability for characterizing facility performance against user-defined mission sets. The software includes a Monte Carlo simulation component that enables rapid generation of key mission-set metrics (e.g., numbers of links, data rates, and date volumes), and statistical distributions thereof as functions of time. The updated version also offers expanded capability for mixed-asset network modeling--for example, for running scenarios that involve user-definable mixtures of antennas having different diameters (in contradistinction to a fixed number of antennas having the same fixed diameter). The improved version also affords greater simulation fidelity, sufficient for validation by comparison with actual DSN operations and analytically predictable performance metrics.

Software Management for the NOνAExperiment

NASA Astrophysics Data System (ADS)

Davies, G. S.; Davies, J. P.; C Group; Rebel, B.; Sachdev, K.; Zirnstein, J.

2015-12-01

The NOvAsoftware (NOνASoft) is written in C++, and built on the Fermilab Computing Division's art framework that uses ROOT analysis software. NOνASoftmakes use of more than 50 external software packages, is developed by more than 50 developers and is used by more than 100 physicists from over 30 universities and laboratories in 3 continents. The software builds are handled by Fermilab's custom version of Software Release Tools (SRT), a UNIX based software management system for large, collaborative projects that is used by several experiments at Fermilab. The system provides software version control with SVN configured in a client-server mode and is based on the code originally developed by the BaBar collaboration. In this paper, we present efforts towards distributing the NOvA software via the CernVM File System distributed file system. We will also describe our recent work to use a CMake build system and Jenkins, the open source continuous integration system, for NOνASoft.

Upgrading Custom Simulink Library Components for Use in Newer Versions of Matlab

NASA Technical Reports Server (NTRS)

Stewart, Camiren L.

2014-01-01

The Spaceport Command and Control System (SCCS) at Kennedy Space Center (KSC) is a control system for monitoring and launching manned launch vehicles. Simulations of ground support equipment (GSE) and the launch vehicle systems are required throughout the life cycle of SCCS to test software, hardware, and procedures to train the launch team. The simulations of the GSE at the launch site in conjunction with off-line processing locations are developed using Simulink, a piece of Commercial Off-The-Shelf (COTS) software. The simulations that are built are then converted into code and ran in a simulation engine called Trick, a Government off-the-shelf (GOTS) piece of software developed by NASA. In the world of hardware and software, it is not uncommon to see the products that are utilized be upgraded and patched or eventually fade away into an obsolete status. In the case of SCCS simulation software, Matlab, a MathWorks product, has released a number of stable versions of Simulink since the deployment of the software on the Development Work Stations in the Linux environment (DWLs). The upgraded versions of Simulink has introduced a number of new tools and resources that, if utilized fully and correctly, will save time and resources during the overall development of the GSE simulation and its correlating documentation. Unfortunately, simply importing the already built simulations into the new Matlab environment will not suffice as it will produce results that may not be expected as they were in the version that is currently being utilized. Thus, an upgrade execution plan was developed and executed to fully upgrade the simulation environment to one of the latest versions of Matlab.

eddy4R 0.2.0: a DevOps model for community-extensible processing and analysis of eddy-covariance data based on R, Git, Docker, and HDF5

NASA Astrophysics Data System (ADS)

Metzger, Stefan; Durden, David; Sturtevant, Cove; Luo, Hongyan; Pingintha-Durden, Natchaya; Sachs, Torsten; Serafimovich, Andrei; Hartmann, Jörg; Li, Jiahong; Xu, Ke; Desai, Ankur R.

2017-08-01

Large differences in instrumentation, site setup, data format, and operating system stymie the adoption of a universal computational environment for processing and analyzing eddy-covariance (EC) data. This results in limited software applicability and extensibility in addition to often substantial inconsistencies in flux estimates. Addressing these concerns, this paper presents the systematic development of portable, reproducible, and extensible EC software achieved by adopting a development and systems operation (DevOps) approach. This software development model is used for the creation of the eddy4R family of EC code packages in the open-source R language for statistical computing. These packages are community developed, iterated via the Git distributed version control system, and wrapped into a portable and reproducible Docker filesystem that is independent of the underlying host operating system. The HDF5 hierarchical data format then provides a streamlined mechanism for highly compressed and fully self-documented data ingest and output. The usefulness of the DevOps approach was evaluated for three test applications. First, the resultant EC processing software was used to analyze standard flux tower data from the first EC instruments installed at a National Ecological Observatory (NEON) field site. Second, through an aircraft test application, we demonstrate the modular extensibility of eddy4R to analyze EC data from other platforms. Third, an intercomparison with commercial-grade software showed excellent agreement (R2 = 1.0 for CO2 flux). In conjunction with this study, a Docker image containing the first two eddy4R packages and an executable example workflow, as well as first NEON EC data products are released publicly. We conclude by describing the work remaining to arrive at the automated generation of science-grade EC fluxes and benefits to the science community at large. This software development model is applicable beyond EC and more generally builds the capacity to deploy complex algorithms developed by scientists in an efficient and scalable manner. In addition, modularity permits meeting project milestones while retaining extensibility with time.

Risk factors for cesarean section and instrumental vaginal delivery after successful external cephalic version.

PubMed

de Hundt, Marcella; Vlemmix, Floortje; Bais, Joke M J; de Groot, Christianne J; Mol, Ben Willem; Kok, Marjolein

2016-01-01

Aim of this article is to examine if we could identify factors that predict cesarean section and instrumental vaginal delivery in women who had a successful external cephalic version. We used data from a previous randomized trial among 25 hospitals and their referring midwife practices in the Netherlands. With the data of this trial, we performed a cohort study among women attempting vaginal delivery after successful ECV. We evaluated whether maternal age, gestational age, parity, time interval between ECV and delivery, birth weight, neonatal gender, and induction of labor were predictive for a vaginal delivery on one hand or a CS or instrumental vaginal delivery on the other hand. Unadjusted and adjusted odds ratios were calculated with univariate and multivariate logistic regression analysis. Among 301 women who attempted vaginal delivery after a successful external cephalic version attempt, the cesarean section rate was 13% and the instrumental vaginal delivery rate 6%, resulting in a combined instrumental delivery rate of 19%. Nulliparity increased the risk of cesarean section (OR 2.7 (95% CI 1.2-6.1)) and instrumental delivery (OR 4.2 (95% CI 2.1-8.6)). Maternal age, gestational age at delivery, time interval between external cephalic version and delivery, birth weight and neonatal gender did not contribute to the prediction of failed spontaneous vaginal delivery. In our cohort of 301 women with a successful external cephalic version, nulliparity was the only one of seven factors that predicted the risk for cesarean section and instrumental vaginal delivery.

Importance of software version for measurement of arterial stiffness: Arteriograph as an example.

PubMed

Ring, Margareta; Eriksson, Maria J; Nyberg, Gunnar; Caidahl, Kenneth

2018-01-01

Current guidelines recommend the measurement of arterial stiffness in terms of aortic pulse wave velocity (PWV) as an important cardio-vascular risk marker. Both aortic PWV and the aortic augmentation index (AIxao) can be measured using different techniques, e.g., the Arteriograph and SphygmoCor. A new version of the software for the Arteriograph (v. 3.0.0.1, TensioMed, Budapest, Hungary; Arteriograph II) is now available. We wanted to determine whether this improved software differs from the previous version (Arteriograph v. 1.9.9.12; Arteriograph I). We compared the estimated aortic PWV (ePWVao) and AIxao measured with both versions of Arteriograph software and analysed the agreement of these values with those measured by SphygmoCor (v. 7.01, AtCor Medical, Sydney, Australia). Eighty-seven subjects without known cardio-vascular disease (23 men and 64 women) aged 54.2 ± 8.7 years (mean ± standard deviation; range 33-68 years) were included in the study. Estimated PWVao and AIxao were measured by both Arteriograph and SphygmoCor. We compared Arteriograph I and Arteriograph II with each other and with SphygmoCor. Estimated PWVao measured by Arteriograph II was lower than that measured by Arteriograph I, while the AIxao was higher. Divergence in ePWVao values was especially noted above 9 m/s. Estimated PWVao measured by Arteriograph II (7.2 m/s, 6.6-8.0 [median, 25th-75th percentile]) did not differ from that measured by SphygmoCor (7.1 m/s, 6.7-7.9 [median, 25th-75th percentile]). However, the AIao measured by Arteriograph II was significantly higher (P < 0.001). Regularly upgraded software versions resulting from continuous technical development are needed for quality improvement of methods. However, the changes in software, even if the basic patented operational algorithm has not changed, may influence the measured values as shown in the present study. Therefore, attention should be paid to the software version of the method used when comparing arterial stiffness results in clinical settings or when performing scientific studies.

Formal assessment instrument for ensuring the security of NASA's networks, systems and software

NASA Technical Reports Server (NTRS)

Gilliam, D. P.; Powell, J. D.; Sherif, J.

2002-01-01

To address the problem of security for NASA's networks, systems and software, NASA has funded the Jet Propulsion Lab in conjunction with UC Davis to begin work on developing a software security assessment instrument for use in the software development and maintenance life cycle.

Software reliability experiments data analysis and investigation

NASA Technical Reports Server (NTRS)

Walker, J. Leslie; Caglayan, Alper K.

1991-01-01

The objectives are to investigate the fundamental reasons which cause independently developed software programs to fail dependently, and to examine fault tolerant software structures which maximize reliability gain in the presence of such dependent failure behavior. The authors used 20 redundant programs from a software reliability experiment to analyze the software errors causing coincident failures, to compare the reliability of N-version and recovery block structures composed of these programs, and to examine the impact of diversity on software reliability using subpopulations of these programs. The results indicate that both conceptually related and unrelated errors can cause coincident failures and that recovery block structures offer more reliability gain than N-version structures if acceptance checks that fail independently from the software components are available. The authors present a theory of general program checkers that have potential application for acceptance tests.

Short version of the "instrument for assessment of stress in nursing students" in the Brazilian reality.

PubMed

Costa, Ana Lúcia Siqueira; Silva, Rodrigo Marques da; Mussi, Fernanda Carneiro; Serrano, Patrícia Maria; Graziano, Eliane da Silva; Batista, Karla de Melo

2018-01-08

validate a short version of the Instrument for assessment of stress in nursing students in the Brazilian reality. Methodological study conducted with 1047 nursing students from five Brazilian institutions, who answered the 30 items initially distributed in eight domains. Data were analyzed in the R Statistical Package and in the latent variable analysis, using exploratory and confirmatory factor analyses, Cronbach's alpha and item-total correlation. The short version of the instrument had 19 items distributed into four domains: Environment, Professional Training, Theoretical Activities and Performance of Practical Activities. The confirmatory analysis showed absolute and parsimony fit to the proposed model with satisfactory residual levels. Alpha values ​​per factor ranged from 0.736 (Environment) to 0.842 (Performance of Practical Activities). The short version of the instrument has construct validity and reliability for application to Brazilian nursing undergraduates at any stage of the course.

Software for simulation of a computed tomography imaging spectrometer using optical design software

NASA Astrophysics Data System (ADS)

Spuhler, Peter T.; Willer, Mark R.; Volin, Curtis E.; Descour, Michael R.; Dereniak, Eustace L.

2000-11-01

Our Imaging Spectrometer Simulation Software known under the name Eikon should improve and speed up the design of a Computed Tomography Imaging Spectrometer (CTIS). Eikon uses existing raytracing software to simulate a virtual instrument. Eikon enables designers to virtually run through the design, calibration and data acquisition, saving significant cost and time when designing an instrument. We anticipate that Eikon simulations will improve future designs of CTIS by allowing engineers to explore more instrument options.

Designing Spatial Visualisation Tasks for Middle School Students with a 3D Modelling Software: An Instrumental Approach

ERIC Educational Resources Information Center

Turgut, Melih; Uygan, Candas

2015-01-01

In this work, certain task designs to enhance middle school students' spatial visualisation ability, in the context of an instrumental approach, have been developed. 3D modelling software, SketchUp®, was used. In the design process, software tools were focused on and, thereafter, the aim was to interpret the instrumental genesis and spatial…

Generic control software connecting astronomical instruments to the reflective memory data recording system of VLTI - bossvlti

NASA Astrophysics Data System (ADS)

Pozna, E.; Ramirez, A.; Mérand, A.; Mueller, A.; Abuter, R.; Frahm, R.; Morel, S.; Schmid, C.; Duc, T. Phan; Delplancke-Ströbele, F.

2014-07-01

The quality of data obtained by VLTI instruments may be refined by analyzing the continuous data supplied by the Reflective Memory Network (RMN). Based on 5 years experience providing VLTI instruments (PACMAN, AMBER, MIDI) with RMN data, the procedure has been generalized to make the synchronization with observation trouble-free. The present software interface saves not only months of efforts for each instrument but also provides the benefits of software frameworks. Recent applications (GRAVITY, MATISSE) supply feedback for the software to evolve. The paper highlights the way common features been identified to be able to offer reusable code in due course.

Software Framework for Controlling Unsupervised Scientific Instruments.

PubMed

Schmid, Benjamin; Jahr, Wiebke; Weber, Michael; Huisken, Jan

2016-01-01

Science outreach and communication are gaining more and more importance for conveying the meaning of today's research to the general public. Public exhibitions of scientific instruments can provide hands-on experience with technical advances and their applications in the life sciences. The software of such devices, however, is oftentimes not appropriate for this purpose. In this study, we describe a software framework and the necessary computer configuration that is well suited for exposing a complex self-built and software-controlled instrument such as a microscope to laymen under limited supervision, e.g. in museums or schools. We identify several aspects that must be met by such software, and we describe a design that can simultaneously be used to control either (i) a fully functional instrument in a robust and fail-safe manner, (ii) an instrument that has low-cost or only partially working hardware attached for illustration purposes or (iii) a completely virtual instrument without hardware attached. We describe how to assess the educational success of such a device, how to monitor its operation and how to facilitate its maintenance. The introduced concepts are illustrated using our software to control eduSPIM, a fluorescent light sheet microscope that we are currently exhibiting in a technical museum.

Development process and initial validation of the Ethical Conflict in Nursing Questionnaire-Critical Care Version.

PubMed

Falcó-Pegueroles, Anna; Lluch-Canut, Teresa; Guàrdia-Olmos, Joan

2013-06-01

Ethical conflicts are arising as a result of the growing complexity of clinical care, coupled with technological advances. Most studies that have developed instruments for measuring ethical conflict base their measures on the variables 'frequency' and 'degree of conflict'. In our view, however, these variables are insufficient for explaining the root of ethical conflicts. Consequently, the present study formulates a conceptual model that also includes the variable 'exposure to conflict', as well as considering six 'types of ethical conflict'. An instrument was then designed to measure the ethical conflicts experienced by nurses who work with critical care patients. The paper describes the development process and validation of this instrument, the Ethical Conflict in Nursing Questionnaire Critical Care Version (ECNQ-CCV). The sample comprised 205 nursing professionals from the critical care units of two hospitals in Barcelona (Spain). The ECNQ-CCV presents 19 nursing scenarios with the potential to produce ethical conflict in the critical care setting. Exposure to ethical conflict was assessed by means of the Index of Exposure to Ethical Conflict (IEEC), a specific index developed to provide a reference value for each respondent by combining the intensity and frequency of occurrence of each scenario featured in the ECNQ-CCV. Following content validity, construct validity was assessed by means of Exploratory Factor Analysis (EFA), while Cronbach's alpha was used to evaluate the instrument's reliability. All analyses were performed using the statistical software PASW v19. Cronbach's alpha for the ECNQ-CCV as a whole was 0.882, which is higher than the values reported for certain other related instruments. The EFA suggested a unidimensional structure, with one component accounting for 33.41% of the explained variance. The ECNQ-CCV is shown to a valid and reliable instrument for use in critical care units. Its structure is such that the four variables on which our model of ethical conflict is based may be studied separately or in combination. The critical care nurses in this sample present moderate levels of exposure to ethical conflict. This study represents the first evaluation of the ECNQ-CCV.

Autogen Version 2.0

NASA Technical Reports Server (NTRS)

Gladden, Roy

2007-01-01

Version 2.0 of the autogen software has been released. "Autogen" (automated sequence generation) signifies both a process and software used to implement the process of automated generation of sequences of commands in a standard format for uplink to spacecraft. Autogen requires fewer workers than are needed for older manual sequence-generation processes and reduces sequence-generation times from weeks to minutes.

Markov chains for testing redundant software

NASA Technical Reports Server (NTRS)

White, Allan L.; Sjogren, Jon A.

1988-01-01

A preliminary design for a validation experiment has been developed that addresses several problems unique to assuring the extremely high quality of multiple-version programs in process-control software. The procedure uses Markov chains to model the error states of the multiple version programs. The programs are observed during simulated process-control testing, and estimates are obtained for the transition probabilities between the states of the Markov chain. The experimental Markov chain model is then expanded into a reliability model that takes into account the inertia of the system being controlled. The reliability of the multiple version software is computed from this reliability model at a given confidence level using confidence intervals obtained for the transition probabilities during the experiment. An example demonstrating the method is provided.

Building a Snow Data Management System using Open Source Software (and IDL)

NASA Astrophysics Data System (ADS)

Goodale, C. E.; Mattmann, C. A.; Ramirez, P.; Hart, A. F.; Painter, T.; Zimdars, P. A.; Bryant, A.; Brodzik, M.; Skiles, M.; Seidel, F. C.; Rittger, K. E.

2012-12-01

At NASA's Jet Propulsion Laboratory free and open source software is used everyday to support a wide range of projects, from planetary to climate to research and development. In this abstract I will discuss the key role that open source software has played in building a robust science data processing pipeline for snow hydrology research, and how the system is also able to leverage programs written in IDL, making JPL's Snow Data System a hybrid of open source and proprietary software. Main Points: - The Design of the Snow Data System (illustrate how the collection of sub-systems are combined to create a complete data processing pipeline) - Discuss the Challenges of moving from a single algorithm on a laptop, to running 100's of parallel algorithms on a cluster of servers (lesson's learned) - Code changes - Software license related challenges - Storage Requirements - System Evolution (from data archiving, to data processing, to data on a map, to near-real-time products and maps) - Road map for the next 6 months (including how easily we re-used the snowDS code base to support the Airborne Snow Observatory Mission) Software in Use and their Software Licenses: IDL - Used for pre and post processing of data. Licensed under a proprietary software license held by Excelis. Apache OODT - Used for data management and workflow processing. Licensed under the Apache License Version 2. GDAL - Geospatial Data processing library used for data re-projection currently. Licensed under the X/MIT license. GeoServer - WMS Server. Licensed under the General Public License Version 2.0 Leaflet.js - Javascript web mapping library. Licensed under the Berkeley Software Distribution License. Python - Glue code and miscellaneous data processing support. Licensed under the Python Software Foundation License. Perl - Script wrapper for running the SCAG algorithm. Licensed under the General Public License Version 3. PHP - Front-end web application programming. Licensed under the PHP License Version 3.01

A comparison of root surface instrumentation using manual, ultrasonic and rotary instruments: an in vitro study using scanning electron microscopy.

PubMed

Marda, Preeti; Prakash, Shobha; Devaraj, C G; Vastardis, S

2012-01-01

The commonly accepted idea concerning root planing is that excessive removal of cementum is not necessary for removal of endotoxins. The ideal instrument should enable the removal of all extraneous substances from the root surfaces, without causing any iatrogenic effects. To compare the remaining calculus, loss of tooth substance, and roughness of root surface after root planing with Gracey curette, ultrasonic instrument (Slimline insert FSI-SLI-10S), and DesmoClean rotary bur. The efficiency of calculus removal, the amount of lost tooth substance, and root surface roughness resulting from the use of hand curette, ultrasonic instrument, and rotary bur on 36 extracted mandibular incisors were examined by SEM. We used three indices to measure the changes: Remaining calculus index (RCI), Loss of tooth substance index (LTSI), and Roughness loss of tooth substance index (RLTSI). Twelve samples were treated with each instrument. The time required for instrumentation was also noted. Kruskal-Wallis ANOVA was used for multiple group comparisons and the Mann-Whitney test for group-wise comparisons. Analysis was carried out with SPSS software (version 13). The RCI and LTSI showed nonsignificant differences between the three groups. RLTSI showed a significant difference between Slimline and hand curette as well as Slimline and Desmo-Clean. Slimline showed the least mean scores for RCI, LTSI, and RLTSI. Thus, even though the difference was not statistically significant, Slimline insert was shown to be better than the other methods as assessed by the indices scores and the instrumentation time.

Needlestick and Sharp Instruments Injuries among Brazilian Dentistry Students

PubMed Central

Fernandes, Liege Helena Freitas; Nunes, Wanúbia Barbosa; Silva, Larissa Costa; Wanderley, Rayssa Lucena; Barros, Criseuda Maria Benício; Cavalcanti, Alessandro Leite

2017-01-01

Background: The occurrence of occupational accidents is common among students and dentists. The present study is aimed to evaluate the prevalence and characteristics of needlestick and sharp instrument injuries among dentistry students. Materials and Methods: A documentary research was carried out with data being obtained from the analysis of 137 medical records of injuries caused by needlestick and sharp instruments occurring in the period from 2012 to 2016 and were analyzed regarding the characteristics of the victim (gender and age) and the accident (year, time, environment, and time interval between exposure and search for care). Data were organized in the Statistical Package for Social Sciences software version 18 and were presented through descriptive statistics. Results: The occurrence of accidents was high (43.1%), with the predominance of female victims (66.1%) and aged up to 23 years (55.9%). The majority of events occurred in the afternoon (54.4%), in the clinical setting (70.7%), and in 75% of the cases, the search for care occurred within 2 h after exposure. Conclusion: Accidents with needlestick and sharp instruments have high frequency and involve mainly female students. They are more common in the afternoon and in the clinical setting and the time interval was between exposure and the search for care complied with recommendations of the Brazilian legislation. PMID:28566861

Achieving design reuse: a case study

NASA Astrophysics Data System (ADS)

Young, Peter J.; Nielsen, Jon J.; Roberts, William H.; Wilson, Greg M.

2008-08-01

The RSAA CICADA data acquisition and control software package uses an object-oriented approach to model astronomical instrumentation and a layered architecture for implementation. Emphasis has been placed on building reusable C++ class libraries and on the use of attribute/value tables for dynamic configuration. This paper details how the approach has been successfully used in the construction of the instrument control software for the Gemini NIFS and GSAOI instruments. The software is again being used for the new RSAA SkyMapper and WiFeS instruments.

The U.S./IAEA Workshop on Software Sustainability for Safeguards Instrumentation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pepper S. E.; .; Worrall, L.

2014-08-08

The U.S. National Nuclear Security Administration’s Next Generation Safeguards Initiative, the U.S. Department of State, and the International Atomic Energy Agency (IAEA) organized a a workshop on the subject of ”Software Sustainability for Safeguards Instrumentation.” The workshop was held at the Vienna International Centre in Vienna, Austria, May 6-8, 2014. The workshop participants included software and hardware experts from national laboratories, industry, government, and IAEA member states who were specially selected by the workshop organizers based on their experience with software that is developed for the control and operation of safeguards instrumentation. The workshop included presentations, to orient the participantsmore » to the IAEA Department of Safeguards software activities related to instrumentation data collection and processing, and case studies that were designed to inspire discussion of software development, use, maintenance, and upgrades in breakout sessions and to result in recommendations for effective software practices and management. This report summarizes the results of the workshop.« less

Numerical arc segmentation algorithm for a radio conference-NASARC (version 2.0) technical manual

NASA Technical Reports Server (NTRS)

Whyte, Wayne A., Jr.; Heyward, Ann O.; Ponchak, Denise S.; Spence, Rodney L.; Zuzek, John E.

1987-01-01

The information contained in the NASARC (Version 2.0) Technical Manual (NASA TM-100160) and NASARC (Version 2.0) User's Manual (NASA TM-100161) relates to the state of NASARC software development through October 16, 1987. The Technical Manual describes the Numerical Arc Segmentation Algorithm for a Radio Conference (NASARC) concept and the algorithms used to implement the concept. The User's Manual provides information on computer system considerations, installation instructions, description of input files, and program operating instructions. Significant revisions have been incorporated in the Version 2.0 software. These revisions have enhanced the modeling capabilities of the NASARC procedure while greatly reducing the computer run time and memory requirements. Array dimensions within the software have been structured to fit within the currently available 6-megabyte memory capacity of the International Frequency Registration Board (IFRB) computer facility. A piecewise approach to predetermined arc generation in NASARC (Version 2.0) allows worldwide scenarios to be accommodated within these memory constraints while at the same time effecting an overall reduction in computer run time.

A computationally efficient software application for calculating vibration from underground railways

NASA Astrophysics Data System (ADS)

Hussein, M. F. M.; Hunt, H. E. M.

2009-08-01

The PiP model is a software application with a user-friendly interface for calculating vibration from underground railways. This paper reports about the software with a focus on its latest version and the plans for future developments. The software calculates the Power Spectral Density of vibration due to a moving train on floating-slab track with track irregularity described by typical values of spectra for tracks with good, average and bad conditions. The latest version accounts for a tunnel embedded in a half space by employing a toolbox developed at K.U. Leuven which calculates Green's functions for a multi-layered half-space.

Update on PISCES

NASA Technical Reports Server (NTRS)

Pearson, Don; Hamm, Dustin; Kubena, Brian; Weaver, Jonathan K.

2010-01-01

An updated version of the Platform Independent Software Components for the Exploration of Space (PISCES) software library is available. A previous version was reported in Library for Developing Spacecraft-Mission-Planning Software (MSC-22983), NASA Tech Briefs, Vol. 25, No. 7 (July 2001), page 52. To recapitulate: This software provides for Web-based, collaborative development of computer programs for planning trajectories and trajectory- related aspects of spacecraft-mission design. The library was built using state-of-the-art object-oriented concepts and software-development methodologies. The components of PISCES include Java-language application programs arranged in a hierarchy of classes that facilitates the reuse of the components. As its full name suggests, the PISCES library affords platform-independence: The Java language makes it possible to use the classes and application programs with a Java virtual machine, which is available in most Web-browser programs. Another advantage is expandability: Object orientation facilitates expansion of the library through creation of a new class. Improvements in the library since the previous version include development of orbital-maneuver- planning and rendezvous-launch-window application programs, enhancement of capabilities for propagation of orbits, and development of a desktop user interface.

75 FR 19461 - Receipt of Petition for Decision That Nonconforming 2006 and 2007 Mercedes Benz G-Class Long...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-14

... in the English language, and be no greater than 15 pages in length, although there is no limit to the... component; (b) installation or activation of the U.S.-version control and display software; and (c..., Partition, and Roof Panel Systems: Installation or activation of U.S.-version software in the vehicle's...

Food Intake Recording Software System, version 4 (FIRSSt4): A self-completed 24-h dietary recall for children

USDA-ARS?s Scientific Manuscript database

The Food Intake Recording Software System, version 4 (FIRSSt4), is a web-based 24-h dietary recall (24 hdr) self-administered by children based on the Automated Self-Administered 24-h recall (ASA24) (a self-administered 24 hdr for adults). The food choices in FIRSSt4 are abbreviated to include only ...

DYNA3D Code Practices and Developments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin, L.; Zywicz, E.; Raboin, P.

2000-04-21

DYNA3D is an explicit, finite element code developed to solve high rate dynamic simulations for problems of interest to the engineering mechanics community. The DYNA3D code has been under continuous development since 1976[1] by the Methods Development Group in the Mechanical Engineering Department of Lawrence Livermore National Laboratory. The pace of code development activities has substantially increased in the past five years, growing from one to between four and six code developers. This has necessitated the use of software tools such as CVS (Concurrent Versions System) to help manage multiple version updates. While on-line documentation with an Adobe PDF manualmore » helps to communicate software developments, periodically a summary document describing recent changes and improvements in DYNA3D software is needed. The first part of this report describes issues surrounding software versions and source control. The remainder of this report details the major capability improvements since the last publicly released version of DYNA3D in 1996. Not included here are the many hundreds of bug corrections and minor enhancements, nor the development in DYNA3D between the manual release in 1993[2] and the public code release in 1996.« less

Previous MOVES Versions and Documentation

EPA Pesticide Factsheets

Find all software, user guides, and download and installation instructions for MOVES2010a and MOVES2010. Note that these version are not valid for SIP and transportation conformity purposes: MOVES2014 and MOVES2014a are the latest versions.

Orbital

NASA Astrophysics Data System (ADS)

Hanson, Robert M.

2003-06-01

ORBITAL requires the following software, which is available for free download from the Internet: Netscape Navigator, version 4.75 or higher, or Microsoft Internet Explorer, version 5.0 or higher; Chime Plug-in, version compatible with your OS and browser (available from MDL).

Unattended Multiplicity Shift Register

DOE Office of Scientific and Technical Information (OSTI.GOV)

Newell, Matt; Jones, David C.

2017-01-16

The Unattended Multiplicity Shift Register (UMSR) is a specialized pulse counter used primarily to count neutron events originating in neutron detection instruments. While the counter can be used to count any TTL input pulses, its unique ability to record time correlated events and the multiplicity distributions of these events makes it an ideal instrument for counting neutron events in the nuclear fields of material safeguards, waste assay and process monitoring and control. The UMSR combines the Los Alamos National Laboratory (LANL) simple and robust shift register design with a Commercial-Off-The-Shelf (COTS) processor and Ethernet communications. The UMSR is fully compatiblemore » with existing International Atomic Energy Agency (IAEA) neutron data acquisition instruments such as the Advance Multiplicity Shift Register (AMSR) and JSR-15. The UMSR has three input channels: a multiplicity shift register input and two auxiliary inputs. The UMSR provides 0V to 2kV of programmable High Voltage (HV) bias and both a 12V and a 5V detector power supply output. A serial over USB communication line to the UMSR allows the use of existing versions of INCC or MIC software while the Ethernet port is compatible with the new IAEA RAINSTORM communication protocol.« less

Software for imaging phase-shift interference microscope

NASA Astrophysics Data System (ADS)

Malinovski, I.; França, R. S.; Couceiro, I. B.

2018-03-01

In recent years absolute interference microscope was created at National Metrology Institute of Brazil (INMETRO). The instrument by principle of operation is imaging phase-shifting interferometer (PSI) equipped with two stabilized lasers of different colour as traceable reference wavelength sources. We report here some progress in development of the software for this instrument. The status of undergoing internal validation and verification of the software is also reported. In contrast with standard PSI method, different methodology of phase evaluation is applied. Therefore, instrument specific procedures for software validation and verification are adapted and discussed.

Translation and validation of the Malay version of the Stroke Knowledge Test.

PubMed

Sowtali, Siti Noorkhairina; Yusoff, Dariah Mohd; Harith, Sakinah; Mohamed, Monniaty

2016-04-01

To date, there is a lack of published studies on assessment tools to evaluate the effectiveness of stroke education programs. This study developed and validated the Malay language version of the Stroke Knowledge Test research instrument. This study involved translation, validity, and reliability phases. The instrument underwent backward and forward translation of the English version into the Malay language. Nine experts reviewed the content for consistency, clarity, difficulty, and suitability for inclusion. Perceived usefulness and utilization were obtained from experts' opinions. Later, face validity assessment was conducted with 10 stroke patients to determine appropriateness of sentences and grammar used. A pilot study was conducted with 41 stroke patients to determine the item analysis and reliability of the translated instrument using the Kuder Richardson 20 or Cronbach's alpha. The final Malay version Stroke Knowledge Test included 20 items with good content coverage, acceptable item properties, and positive expert review ratings. Psychometric investigations suggest that Malay version Stroke Knowledge Test had moderate reliability with Kuder Richardson 20 or Cronbach's alpha of 0.58. Improvement is required for Stroke Knowledge Test items with unacceptable difficulty indices. Overall, the average rating of perceived usefulness and perceived utility of the instruments were both 72.7%, suggesting that reviewers were likely to use the instruments in their facilities. Malay version Stroke Knowledge Test was a valid and reliable tool to assess educational needs and to evaluate stroke knowledge among participants of group-based stroke education programs in Malaysia.

Design of two-channel oscilloscope and basic circuit simulations in LabView

NASA Astrophysics Data System (ADS)

Balzhiev, Plamen; Makal, Jaroslaw

2008-01-01

The project is realized as a diploma thesis in Bialystok Technical University, Poland). The main aim is to develop a useful educational tool which presents the time and frequency characteristics in basic electrical circuits. It is designed as a helpful instrument for lectures and laboratory classes. The predominant audience will be students of electrical engineering from first semester of the higher education. Therefore the level of knowledge at this stage of education is not high enough and different techniques are necessary to increase the students' interest and the efficiency of teaching process. This educational instrument provides the needed knowledge concerning the basic circuits and its parameters. Graphics and animations of the general processes in the electrical circuits make the problems more interesting, comprehensive and easier to understand. For designing such an instrument the National Instruments' programming environment LabView is used. It is preferred to the other simulation software because of its simplicity flexibility and also availability (the free demo version is sufficient to make a simple virtual instrument). LabView uses graphical programming language and has powerful mathematical functions for analysis and simulations. The useful visualization tools for presenting different diagrams are worth recommending, too. It is also specialized in measurement and control and it supports a wide variety of hardware. Therefore this software is suitable for laboratory classes to present the dependencies between the simulated characteristics in basic electrical circuits and the real one measured with the hardware device. For this purpose a two-channel oscilloscope is designed as part of the described project. The main purpose of this instrument as part of the educational process is to present the desired characteristics of the electrical circuits and to become familiar with the general functions of the oscilloscope. This project combines several important features appropriate for teaching purposes: well presented information with graphics, easy to operate with and giving the necessary knowledge. This method of teaching is more interesting and attractive to the audience. Also the information is assimilated more quickly, with less effort.

Second generation experiments in fault tolerant software

NASA Technical Reports Server (NTRS)

Knight, J. C.

1987-01-01

The purpose of the Multi-Version Software (MVS) experiment is to obtain empirical measurements of the performance of multi-version systems. Twenty version of a program were prepared under reasonably realistic development conditions from the same specifications. The overall structure of the testing environment for the MVS experiment and its status are described. A preliminary version of the control system is described that was implemented for the MVS experiment to allow the experimenter to have control over the details of the testing. The results of an empirical study of error detection using self checks are also presented. The analysis of the checks revealed that there are great differences in the ability of individual programmers to design effective checks.

Super Cooled Large Droplet Analysis of Several Geometries Using LEWICE3D Version 3

NASA Technical Reports Server (NTRS)

Bidwell, Colin S.

2011-01-01

Super Cooled Large Droplet (SLD) collection efficiency calculations were performed for several geometries using the LEWICE3D Version 3 software. The computations were performed using the NASA Glenn Research Center SLD splashing model which has been incorporated into the LEWICE3D Version 3 software. Comparisons to experiment were made where available. The geometries included two straight wings, a swept 64A008 wing tip, two high lift geometries, and the generic commercial transport DLR-F4 wing body configuration. In general the LEWICE3D Version 3 computations compared well with the 2D LEWICE 3.2.2 results and with experimental data where available.

49 CFR 229.305 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... cohesion. Component means an electronic element, device, or appliance (including hardware or software) that... and software version, is documented and maintained through the life-cycle of the products in use. Executive software means software common to all installations of a given electronic product. It generally is...

49 CFR 229.305 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... cohesion. Component means an electronic element, device, or appliance (including hardware or software) that... and software version, is documented and maintained through the life-cycle of the products in use. Executive software means software common to all installations of a given electronic product. It generally is...

49 CFR 229.305 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... cohesion. Component means an electronic element, device, or appliance (including hardware or software) that... and software version, is documented and maintained through the life-cycle of the products in use. Executive software means software common to all installations of a given electronic product. It generally is...

JANIS 4: An Improved Version of the NEA Java-based Nuclear Data Information System

NASA Astrophysics Data System (ADS)

Soppera, N.; Bossant, M.; Dupont, E.

2014-06-01

JANIS is software developed to facilitate the visualization and manipulation of nuclear data, giving access to evaluated data libraries, and to the EXFOR and CINDA databases. It is stand-alone Java software, downloadable from the web and distributed on DVD. Used offline, the system also makes use of an internet connection to access the NEA Data Bank database. It is now also offered as a full web application, only requiring a browser. The features added in the latest version of the software and this new web interface are described.

JANIS 4: An Improved Version of the NEA Java-based Nuclear Data Information System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Soppera, N., E-mail: nicolas.soppera@oecd.org; Bossant, M.; Dupont, E.

JANIS is software developed to facilitate the visualization and manipulation of nuclear data, giving access to evaluated data libraries, and to the EXFOR and CINDA databases. It is stand-alone Java software, downloadable from the web and distributed on DVD. Used offline, the system also makes use of an internet connection to access the NEA Data Bank database. It is now also offered as a full web application, only requiring a browser. The features added in the latest version of the software and this new web interface are described.

Validity and reliability of bilingual English-Arabic version of Schutte self report emotional intelligence scale in an undergraduate Arab medical student sample.

PubMed

Naeem, Naghma; Muijtjens, Arno

2015-04-01

The psychological construct of emotional intelligence (EI), its theoretical models, measurement instruments and applications have been the subject of several research studies in health professions education. The objective of the current study was to investigate the factorial validity and reliability of a bilingual version of the Schutte Self Report Emotional Intelligence Scale (SSREIS) in an undergraduate Arab medical student population. The study was conducted during April-May 2012. A cross-sectional survey design was employed. A sample (n = 467) was obtained from undergraduate medical students belonging to the male and female medical college of King Saud University, Riyadh, Saudi Arabia. Exploratory and confirmatory factor analysis was performed using SPSS 16.0 and AMOS 4.0 statistical software to determine the factor structure. Reliability was determined using Cronbach's alpha statistics. The results obtained using an undergraduate Arab medical student sample supported a multidimensional; three factor structure of the SSREIS. The three factors are Optimism, Awareness-of-Emotions and Use-of-Emotions. The reliability (Cronbach's alpha) for the three subscales was 0.76, 0.72 and 0.55, respectively. Emotional intelligence is a multifactorial construct (three factors). The bilingual version of the SSREIS is a valid and reliable measure of trait emotional intelligence in an undergraduate Arab medical student population.

Clinical Evaluation of Quality of Obturation and Instrumentation Time using Two Modified Rotary File Systems with Manual Instrumentation in Primary Teeth.

PubMed

Govindaraju, Lavanya; Jeevanandan, Ganesh; Subramanian, Emg

2017-09-01

Pulp therapy in primary teeth has been performed using various instrumentation techniques. However, the conventional instrumentation technique used for root canal preparation in primary teeth is hand instrumentation. Various Nickel-Titanium (Ni-Ti) instruments are available to perform efficient root canal preparation in primary teeth. These Ni-Ti instruments has been designed to aid in better root canal preparation in permanent teeth but are rarely used in primary teeth. It is necessary to assess the feasibility of using these adult rotary files with a modified sequence in primary teeth. To compare the quality of obturation and instrumentation time during root canal preparation using hand files and modified rotary file systems in primary molars. Forty-five primary mandibular molars were randomly assigned to three experimental groups (n=15). Group I was instrumented using k-hand files, Group II with S2 ProTaper universal file and Group III with 0.25 tip 4% taper K3 rotary file. Standardized digital radiographs were taken before and after root canal instrumentation. Root canal preparation time was also recorded. Statistical analysis of the obtained data was done using SPSS Software version 17.0. An intergroup comparison of the instrumentation time and the quality of obturation was done using ANOVA and Chi-square test with the level of significance set at 0.05. No significant differences were noted with regard to the quality of obturation (p=0.791). However, a statistically significant difference was noted in the instrumentation time between the three groups (p<0.05). ProTaper rotary system had significantly lesser instrumentation time when compared to that of K3 rotary system and hand file system. The hand files, S2 ProTaper Universal and K3 0.25 tip 4% taper files systems performed similarly with respect to the quality of obturation. There was a significant difference in instrumentation time with manual instrumentation compared to the modified rotary file systems in primary teeth.

Wind Evaluation Breadboard electronics and software

NASA Astrophysics Data System (ADS)

Núñez, Miguel; Reyes, Marcos; Viera, Teodora; Zuluaga, Pablo

2008-07-01

WEB, the Wind Evaluation Breadboard, is an Extremely Large Telescope Primary Mirror simulator, developed with the aim of quantifying the ability of a segmented primary mirror to cope with wind disturbances. This instrument supported by the European Community (Framework Programme 6, ELT Design Study), is developed by ESO, IAC, MEDIA-ALTRAN, JUPASA and FOGALE. The WEB is a bench of about 20 tons and 7 meter diameter emulating a segmented primary mirror and its cell, with 7 hexagonal segments simulators, including electromechanical support systems. In this paper we present the WEB central control electronics and the software development which has to interface with: position actuators, auxiliary slave actuators, edge sensors, azimuth ring, elevation actuator, meteorological station and air balloons enclosure. The set of subsystems to control is a reduced version of a real telescope segmented primary mirror control system with high real time performance but emphasizing on development time efficiency and flexibility, because WEB is a test bench. The paper includes a detailed description of hardware and software, paying special attention to real time performance. The Hardware is composed of three computers and the Software architecture has been divided in three intercommunicated applications and they have been implemented using Labview over Windows XP and Pharlap ETS real time operating system. The edge sensors and position actuators close loop has a sampling and commanding frequency of 1KHz.

View_SPECPR: Software for Plotting Spectra (Installation Manual and User's Guide, Version 1.2)

USGS Publications Warehouse

Kokaly, Raymond F.

2008-01-01

This document describes procedures for installing and using the 'View_SPECPR' software system to plot spectra stored in SPECPR (SPECtrum Processing Routines) files. The View_SPECPR software is comprised of programs written in IDL (Interactive Data Language) that run within the ENVI (ENvironment for Visualizing Images) image processing system. SPECPR files are used by earth-remote-sensing scientists and planetary scientists for storing spectra collected by laboratory, field, and remote sensing instruments. A widely distributed SPECPR file is the U.S. Geological Survey (USGS) spectral library that contains thousands of spectra of minerals, vegetation, and man-made materials (Clark and others, 2007). SPECPR files contain reflectance data and associated wavelength and spectral resolution data, as well as meta-data on the time and date of collection and spectrometer settings. Furthermore, the SPECPR file automatically tracks changes to data records through its 'history' fields. For more details on the format and content of SPECPR files, see Clark (1993). For more details on ENVI, see ITT (2008). This program has been updated using an ENVI 4.5/IDL7.0 full license operating on a Windows XP operating system and requires the installation of the iTools components of IDL7.0; however, this program should work with full licenses on UNIX/LINUX systems. This software has not been tested with ENVI licenses on Windows Vista or Apple Operating Systems.

Software Attribution for Geoscience Applications in the Computational Infrastructure for Geodynamics

NASA Astrophysics Data System (ADS)

Hwang, L.; Dumit, J.; Fish, A.; Soito, L.; Kellogg, L. H.; Smith, M.

2015-12-01

Scientific software is largely developed by individual scientists and represents a significant intellectual contribution to the field. As the scientific culture and funding agencies move towards an expectation that software be open-source, there is a corresponding need for mechanisms to cite software, both to provide credit and recognition to developers, and to aid in discoverability of software and scientific reproducibility. We assess the geodynamic modeling community's current citation practices by examining more than 300 predominantly self-reported publications utilizing scientific software in the past 5 years that is available through the Computational Infrastructure for Geodynamics (CIG). Preliminary results indicate that authors cite and attribute software either through citing (in rank order) peer-reviewed scientific publications, a user's manual, and/or a paper describing the software code. Attributions maybe found directly in the text, in acknowledgements, in figure captions, or in footnotes. What is considered citable varies widely. Citations predominantly lack software version numbers or persistent identifiers to find the software package. Versioning may be implied through reference to a versioned user manual. Authors sometimes report code features used and whether they have modified the code. As an open-source community, CIG requests that researchers contribute their modifications to the repository. However, such modifications may not be contributed back to a repository code branch, decreasing the chances of discoverability and reproducibility. Survey results through CIG's Software Attribution for Geoscience Applications (SAGA) project suggest that lack of knowledge, tools, and workflows to cite codes are barriers to effectively implement the emerging citation norms. Generated on-demand attributions on software landing pages and a prototype extensible plug-in to automatically generate attributions in codes are the first steps towards reproducibility.

Videogrammetric Model Deformation Measurement System User's Manual

NASA Technical Reports Server (NTRS)

Dismond, Harriett R.

2002-01-01

The purpose of this manual is to provide the user of the NASA VMD system, running the MDef software, Version 1.10, all information required to operate the system. The NASA Videogrammetric Model Deformation system consists of an automated videogrammetric technique used to measure the change in wing twist and bending under aerodynamic load in a wind tunnel. The basic instrumentation consists of a single CCD video camera and a frame grabber interfaced to a computer. The technique is based upon a single view photogrammetric determination of two-dimensional coordinates of wing targets with fixed (and known) third dimensional coordinate, namely the span-wise location. The major consideration in the development of the measurement system was that productivity must not be appreciably reduced.

Security Verification Techniques Applied to PatchLink COTS Software

NASA Technical Reports Server (NTRS)

Gilliam, David P.; Powell, John D.; Bishop, Matt; Andrew, Chris; Jog, Sameer

2006-01-01

Verification of the security of software artifacts is a challenging task. An integrated approach that combines verification techniques can increase the confidence in the security of software artifacts. Such an approach has been developed by the Jet Propulsion Laboratory (JPL) and the University of California at Davis (UC Davis). Two security verification instruments were developed and then piloted on PatchLink's UNIX Agent, a Commercial-Off-The-Shelf (COTS) software product, to assess the value of the instruments and the approach. The two instruments are the Flexible Modeling Framework (FMF) -- a model-based verification instrument (JPL), and a Property-Based Tester (UC Davis). Security properties were formally specified for the COTS artifact and then verified using these instruments. The results were then reviewed to determine the effectiveness of the approach and the security of the COTS product.

Implications of Version 8 TOMS and SBUV Data for Long-Term Trend Analysis

NASA Technical Reports Server (NTRS)

Frith, Stacey M.

2004-01-01

Total ozone data from the Total Ozone Mapping Spectrometer (TOMS) and profile/total ozone data from the Solar Backscatter Ultraviolet (SBUV; SBW/2) series of instruments have recently been reprocessed using new retrieval algorithms (referred to as Version 8 for both) and updated calibrations. In this paper, we incorporate the Version 8 data into a TOMS/SBW merged total ozone data set and an S B W merged profile ozone data set. The Total Merged Ozone Data (Total MOD) combines data from multiple TOMS and SBW instruments to form an internally consistent global data set with virtually complete time coverage from October 1978 through December 2003. Calibration differences between instruments are accounted for using external adjustments based on instrument intercomparisons during overlap periods. Previous results showed errors due to aerosol loading and sea glint are significantly reduced in the V8 TOMS retrievals. Using SBW as a transfer standard, calibration differences between V8 Nimbus 7 and Earth Probe TOMS data are approx. 1.3%, suggesting small errors in calibration remain. We will present updated total ozone long-term trends based on the Version 8 data. The Profile Merged Ozone Data (Profile MOD) data set is constructed using data from the SBUV series of instruments. In previous versions, SAGE data were used to establish the long-term external calibration of the combined data set. The SBW Version 8 we assess the V8 profile data through comparisons with SAGE and between SBW instruments in overlap periods. We then construct a consistently-calibrated long term time series. Updated zonal mean trends as a function of altitude and season from the new profile data set will be shown, and uncertainties in determining the best long-term calibration will be discussed.

SmaggIce 2D Version 1.8: Software Toolkit Developed for Aerodynamic Simulation Over Iced Airfoils

NASA Technical Reports Server (NTRS)

Choo, Yung K.; Vickerman, Mary B.

2005-01-01

SmaggIce 2D version 1.8 is a software toolkit developed at the NASA Glenn Research Center that consists of tools for modeling the geometry of and generating the grids for clean and iced airfoils. Plans call for the completed SmaggIce 2D version 2.0 to streamline the entire aerodynamic simulation process--the characterization and modeling of ice shapes, grid generation, and flow simulation--and to be closely coupled with the public-domain application flow solver, WIND. Grid generated using version 1.8, however, can be used by other flow solvers. SmaggIce 2D will help researchers and engineers study the effects of ice accretion on airfoil performance, which is difficult to do with existing software tools because of complex ice shapes. Using SmaggIce 2D, when fully developed, to simulate flow over an iced airfoil will help to reduce the cost of performing flight and wind-tunnel tests for certifying aircraft in natural and simulated icing conditions.

Behavior of healthcare workers after injuries from sharp instruments.

PubMed

Adib-Hajbaghery, Mohsen; Lotfi, Mohammad Sajjad

2013-09-01

Injuries with sharps are common occupational hazards for healthcare workers. Such injuries predispose the staff to dangerous infections such as hepatitis B, C and HIV. The present study was conducted to investigate the behaviors of healthcare workers in Kashan healthcare centers after needle sticks and injuries with sharps in 2012. A cross-sectional study was conducted on 298 healthcare workers of medical centers governed by Kashan University of Medical Sciences. A questionnaire was used in this study. The first part included questions about demographic characteristics. The second part of the questionnaire consisted of 16 items related to the sharp instrument injuries. For data analysis, descriptive and analytical statistics (chi-square, ANOVA and Pearson correlation coefficient) SPSS version 16.0 software was used. From a total of 298 healthcare workers, 114 (38.3%) had a history of injury from needles and sharp instruments in the last six months. Most needle stick and sharp instrument injuries had occurred among the operating room nurses and midwifes; 32.5% of injuries from sharp instruments occurred in the morning shift. Needles were responsible for 46.5% of injuries. The most common actions taken after needle stick injuries were compression (27.2%) and washing the area with soap and water (15.8%). Only 44.6% of the injured personnel pursued follow-up measures after a needle stick or sharp instrument injury. More than a half of the healthcare workers with needle stick or sharp instrument injury had refused follow-up for various reasons. The authorities should implement education programs along with protocols to be implemented after needle stick injuries or sharps.

Cementitious Barriers Partnership FY2013 End-Year Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Flach, G. P.; Langton, C. A.; Burns, H. H.

2013-11-01

In FY2013, the Cementitious Barriers Partnership (CBP) demonstrated continued tangible progress toward fulfilling the objective of developing a set of software tools to improve understanding and prediction of the long-term structural, hydraulic and chemical performance of cementitious barriers used in nuclear applications. In November 2012, the CBP released “Version 1.0” of the CBP Software Toolbox, a suite of software for simulating reactive transport in cementitious materials and important degradation phenomena. In addition, the CBP completed development of new software for the “Version 2.0” Toolbox to be released in early FY2014 and demonstrated use of the Version 1.0 Toolbox on DOEmore » applications. The current primary software components in both Versions 1.0 and 2.0 are LeachXS/ORCHESTRA, STADIUM, and a GoldSim interface for probabilistic analysis of selected degradation scenarios. The CBP Software Toolbox Version 1.0 supports analysis of external sulfate attack (including damage mechanics), carbonation, and primary constituent leaching. Version 2.0 includes the additional analysis of chloride attack and dual regime flow and contaminant migration in fractured and non-fractured cementitious material. The LeachXS component embodies an extensive material property measurements database along with chemical speciation and reactive mass transport simulation cases with emphasis on leaching of major, trace and radionuclide constituents from cementitious materials used in DOE facilities, such as Saltstone (Savannah River) and Cast Stone (Hanford), tank closure grouts, and barrier concretes. STADIUM focuses on the physical and structural service life of materials and components based on chemical speciation and reactive mass transport of major cement constituents and aggressive species (e.g., chloride, sulfate, etc.). THAMES is a planned future CBP Toolbox component focused on simulation of the microstructure of cementitious materials and calculation of resultant hydraulic and constituent mass transfer parameters needed in modeling. Two CBP software demonstrations were conducted in FY2013, one to support the Saltstone Disposal Facility (SDF) at SRS and the other on a representative Hanford high-level waste tank. The CBP Toolbox demonstration on the SDF provided analysis on the most probable degradation mechanisms to the cementitious vault enclosure caused by sulfate and carbonation ingress. This analysis was documented and resulted in the issuance of a SDF Performance Assessment Special Analysis by Liquid Waste Operations this fiscal year. The two new software tools supporting chloride attack and dual-regime flow will provide additional degradation tools to better evaluate performance of DOE and commercial cementitious barriers. The CBP SRNL experimental program produced two patent applications and field data that will be used in the development and calibration of CBP software tools being developed in FY2014. The CBP software and simulation tools varies from other efforts in that all the tools are based upon specific and relevant experimental research of cementitious materials utilized in DOE applications. The CBP FY2013 program involved continuing research to improve and enhance the simulation tools as well as developing new tools that model other key degradation phenomena not addressed in Version 1.0. Also efforts to continue to verify the various simulation tools through laboratory experiments and analysis of field specimens are ongoing and will continue into FY2014 to quantify and reduce the uncertainty associated with performance assessments. This end-year report summarizes FY2013 software development efforts and the various experimental programs that are providing data for calibration and validation of the CBP developed software.« less

Development and validation of the Bush-Francis Catatonia Rating Scale - Brazilian version.

PubMed

Nunes, Ana Letícia Santos; Filgueiras, Alberto; Nicolato, Rodrigo; Alvarenga, Jussara Mendonça; Silveira, Luciana Angélica Silva; Silva, Rafael Assis da; Cheniaux, Elie

2017-01-01

This article aims to describe the adaptation and translation process of the Bush-Francis Catatonia Rating Scale (BFCRS) and its reduced version, the Bush-Francis Catatonia Screening Instrument (BFCSI) for Brazilian Portuguese, as well as its validation. Semantic equivalence processes included four steps: translation, back translation, evaluation of semantic equivalence and a pilot-study. Validation consisted of simultaneous applications of the instrument in Portuguese by two examiners in 30 catatonic and 30 non-catatonic patients. Total scores averaged 20.07 for the complete scale and 7.80 for its reduced version among catatonic patients, compared with 0.47 and 0.20 among non-catatonic patients, respectively. Overall values of inter-rater reliability of the instruments were 0.97 for the BFCSI and 0.96 for the BFCRS. The scale's version in Portuguese proved to be valid and was able to distinguish between catatonic and non-catatonic patients. It was also reliable, with inter-evaluator reliability indexes as high as those of the original instrument.

Development of a Patient-Reported Outcome Instrument to Evaluate Symptoms of Advanced NSCLC: Qualitative Research and Content Validity of the Non-Small Cell Lung Cancer Symptom Assessment Questionnaire (NSCLC-SAQ)

PubMed Central

Atkinson, Thomas M.; DeBusk, Kendra P.A.; Liepa, Astra M.; Scanlon, Michael; Coons, Stephen Joel

2016-01-01

PURPOSE To describe the process and results of the preliminary qualitative development of a new symptom-based PRO measure intended to assess treatment benefit in advanced non-small cell lung cancer (NSCLC) clinical trials. METHODS Individual qualitative interviews were conducted with adult NSCLC (Stage I–IV) patients in the US. Experienced interviewers conducted concept elicitation (CE) and cognitive interviews using semi-structured interview guides. The CE interview guide was used to elicit spontaneous reports of symptom experiences along with probing to further explore and confirm concepts. Interview transcripts were coded and analyzed by professional qualitative coders using Atlas.ti software, and were summarized by like-content using an iterative coding framework. Data from the CE interviews were considered alongside existing literature and clinical expert opinion during an item-generation process, leading to development of a preliminary version of the NSCLC Symptom Assessment Questionnaire (NSCLC-SAQ). Three waves of cognitive interviews were conducted to evaluate concept relevance, item interpretability, and structure of the draft items to facilitate further instrument refinement. FINDINGS Fifty-one patients (mean age 64.9 [SD=11.2]; 51.0% female) participated in the CE interviews. A total of 1,897 expressions of NSCLC-related symptoms were identified and coded in interview transcripts, representing approximately 42 distinct symptom concepts. A 9-item initial draft instrument was developed for testing in three waves of cognitive interviews with additional NSCLC patients (n=20), during which both paper and electronic versions of the instrument were evaluated and refined. Participant responses and feedback during cognitive interviews led to the removal of 2 items and substantial modifications to others. IMPLICATIONS The NSCLC-SAQ is a 7-item PRO measure intended for use in advanced NSCLC clinical trials to support medical product labelling. The NSCLC-SAQ uses a 7-day recall period and verbal rating scales. It was developed in accordance with the FDA’s PRO Guidance and scientific best practices, and the resulting qualitative interview data provide evidence of content validity. The NSCLC-SAQ has been prepared in both paper and electronic administration formats and a tablet computer-based version is currently undergoing quantitative testing to confirm its measurement properties and support FDA qualification. PMID:27041408

Earth Observing System/Advanced Microwave Sounding Unit-A (EOS/AMSU-A) software management plan

NASA Technical Reports Server (NTRS)

Schwantje, Robert

1994-01-01

This document defines the responsibilites for the management of the like-cycle development of the flight software installed in the AMSU-A instruments, and the ground support software used in the test and integration of the AMSU-A instruments.

Analysis of Photogrammetry Data from ISIM Mockup

NASA Technical Reports Server (NTRS)

Nowak, Maria; Hill, Mike

2007-01-01

During ground testing of the Integrated Science Instrument Module (ISIM) for the James Webb Space Telescope (JWST), the ISIM Optics group plans to use a Photogrammetry Measurement System for cryogenic calibration of specific target points on the ISIM composite structure and Science Instrument optical benches and other GSE equipment. This testing will occur in the Space Environmental Systems (SES) chamber at Goddard Space Flight Center. Close range photogrammetry is a 3 dimensional metrology system using triangulation to locate custom targets in 3 coordinates via a collection of digital photographs taken from various locations and orientations. These photos are connected using coded targets, special targets that are recognized by the software and can thus correlate the images to provide a 3 dimensional map of the targets, and scaled via well calibrated scale bars. Photogrammetry solves for the camera location and coordinates of the targets simultaneously through the bundling procedure contained in the V-STARS software, proprietary software owned by Geodetic Systems Inc. The primary objectives of the metrology performed on the ISIM mock-up were (1) to quantify the accuracy of the INCA3 photogrammetry camera on a representative full scale version of the ISIM structure at ambient temperature by comparing the measurements obtained with this camera to measurements using the Leica laser tracker system and (2), empirically determine the smallest increment of target position movement that can be resolved by the PG camera in the test setup, i.e., precision, or resolution. In addition, the geometrical details of the test setup defined during the mockup testing, such as target locations and camera positions, will contribute to the final design of the photogrammetry system to be used on the ISIM Flight Structure.

DeuteRater: a tool for quantifying peptide isotope precision and kinetic proteomics.

PubMed

Naylor, Bradley C; Porter, Michael T; Wilson, Elise; Herring, Adam; Lofthouse, Spencer; Hannemann, Austin; Piccolo, Stephen R; Rockwood, Alan L; Price, John C

2017-05-15

Using mass spectrometry to measure the concentration and turnover of the individual proteins in a proteome, enables the calculation of individual synthesis and degradation rates for each protein. Software to analyze concentration is readily available, but software to analyze turnover is lacking. Data analysis workflows typically don't access the full breadth of information about instrument precision and accuracy that is present in each peptide isotopic envelope measurement. This method utilizes both isotope distribution and changes in neutromer spacing, which benefits the analysis of both concentration and turnover. We have developed a data analysis tool, DeuteRater, to measure protein turnover from metabolic D 2 O labeling. DeuteRater uses theoretical predictions for label-dependent change in isotope abundance and inter-peak (neutromer) spacing within the isotope envelope to calculate protein turnover rate. We have also used these metrics to evaluate the accuracy and precision of peptide measurements and thereby determined the optimal data acquisition parameters of different instruments, as well as the effect of data processing steps. We show that these combined measurements can be used to remove noise and increase confidence in the protein turnover measurement for each protein. Source code and ReadMe for Python 2 and 3 versions of DeuteRater are available at https://github.com/JC-Price/DeuteRater . Data is at https://chorusproject.org/pages/index.html project number 1147. Critical Intermediate calculation files provided as Tables S3 and S4. Software has only been tested on Windows machines. jcprice@chem.byu.edu. Supplementary data are available at Bioinformatics online. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com

Integrated Farm System Model Version 4.1 and Dairy Gas Emissions Model Version 3.1 software release and distribution

USDA-ARS?s Scientific Manuscript database

Animal facilities are significant contributors of gaseous emissions including ammonia (NH3) and nitrous oxide (N2O). Previous versions of the Integrated Farm System Model (IFSM version 4.0) and Dairy Gas Emissions Model (DairyGEM version 3.0), two whole-farm simulation models developed by USDA-ARS, ...

Instrument Packages for the Cold, Dark, High Radiation Environments

NASA Technical Reports Server (NTRS)

Clark, P. E.; Millar, P. S.; Yeh, P. S.; Beamna, B.; Brigham, D.; Feng, S.

2011-01-01

We are developing a small cold temperature instrument package concept that integrates a cold temperature power system and radhard ultra low temperature ultra low power electronics components and power supplies now under development into a cold temperature surface operational version of a planetary surface instrument package. We are already in the process of developing a lower power lower tem-perature version for an instrument of mutual interest to SMD and ESMD to support the search for volatiles (the mass spectrometer VAPoR, Volatile Analysis by Pyrolysis of Regolith) both as a stand alone instrument and as part of an environmental monitoring package.

WFF TOPEX Software Documentation Altimeter Instrument File (AIF) Processing, October 1998. Volume 3

NASA Technical Reports Server (NTRS)

Lee, Jeffrey; Lockwood, Dennis

2003-01-01

This document is a compendium of the WFF TOPEX Software Development Team's knowledge regarding Sensor Data Record (SDR) Processing. It includes many elements of a requirements document, a software specification document, a software design document, and a user's manual. In the more technical sections, this document assumes the reader is familiar with TOPEX and instrument files.

DOEDEF Software System, Version 2. 2: Operational instructions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meirans, L.

The DOEDEF (Department of Energy Data Exchange Format) Software System is a collection of software routines written to facilitate the manipulation of IGES (Initial Graphics Exchange Specification) data. Typically, the IGES data has been produced by the IGES processors for a Computer-Aided Design (CAD) system, and the data manipulations are user-defined ''flavoring'' operations. The DOEDEF Software System is used in conjunction with the RIM (Relational Information Management) DBMS from Boeing Computer Services (Version 7, UD18 or higher). The three major pieces of the software system are: Parser, reads an ASCII IGES file and converts it to the RIM database equivalent;more » Kernel, provides the user with IGES-oriented interface routines to the database; and Filewriter, writes the RIM database to an IGES file.« less

76 FR 17757 - Airworthiness Directives; Thielert Aircraft Engines GmbH Models TAE 125-01, TAE 125-02-99, and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-31

...: Service experience has shown that a case of FADEC channel B manifold air pressure (MAP) sensor hose... combustion chamber and thus the available power of the engine. A change in FADEC software version 2.91 will..., previous software versions allow--under certain conditions and on DA 42 aircraft only--the initiation of a...

76 FR 70382 - Airworthiness Directives; General Electric Company (GE) CF6-80C2B Series Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-14

... installing software version 8.2.Q1 to the engine electronic control unit (ECU), which increases the engine's... proposed AD would require the removal of the affected ECUs from service. We are proposing this AD to... software version 8.2.Q1 to the ECU, which increases the engine's margin to flameout. That AD was prompted...

SAGA: A project to automate the management of software production systems

NASA Technical Reports Server (NTRS)

Campbell, Roy H.; Laliberte, D.; Render, H.; Sum, R.; Smith, W.; Terwilliger, R.

1987-01-01

The Software Automation, Generation and Administration (SAGA) project is investigating the design and construction of practical software engineering environments for developing and maintaining aerospace systems and applications software. The research includes the practical organization of the software lifecycle, configuration management, software requirements specifications, executable specifications, design methodologies, programming, verification, validation and testing, version control, maintenance, the reuse of software, software libraries, documentation, and automated management.

Confirmatory Factor Analysis Alternative: Free, Accessible CBID Software.

PubMed

Bott, Marjorie; Karanevich, Alex G; Garrard, Lili; Price, Larry R; Mudaranthakam, Dinesh Pal; Gajewski, Byron

2018-02-01

New software that performs Classical and Bayesian Instrument Development (CBID) is reported that seamlessly integrates expert (content validity) and participant data (construct validity) to produce entire reliability estimates with smaller sample requirements. The free CBID software can be accessed through a website and used by clinical investigators in new instrument development. Demonstrations are presented of the three approaches using the CBID software: (a) traditional confirmatory factor analysis (CFA), (b) Bayesian CFA using flat uninformative prior, and (c) Bayesian CFA using content expert data (informative prior). Outcomes of usability testing demonstrate the need to make the user-friendly, free CBID software available to interdisciplinary researchers. CBID has the potential to be a new and expeditious method for instrument development, adding to our current measurement toolbox. This allows for the development of new instruments for measuring determinants of health in smaller diverse populations or populations of rare diseases.

Software structure for Vega/Chara instrument

NASA Astrophysics Data System (ADS)

Clausse, J.-M.

2008-07-01

VEGA (Visible spEctroGraph and polArimeter) is one of the focal instruments of the CHARA array at Mount Wilson near Los Angeles. Its control system is based on techniques developed on the GI2T interferometer (Grand Interferometre a 2 Telescopes) and on the SIRIUS fibered hyper telescope testbed at OCA (Observatoire de la Cote d'Azur). This article describes the software and electronics architecture of the instrument. It is based on local network architecture and uses also Virtual Private Network connections. The server part is based on Windows XP (VC++). The control software is on Linux (C, GTK). For the control of the science detector and the fringe tracking systems, distributed API use real-time techniques. The control software gathers all the necessary informations of the instrument. It allows an automatic management of the instrument by using an original task scheduler. This architecture intends to drive the instrument from remote sites, such as our institute in South of France.

Transcultural adaptation and new proposal for the nursing outcome, Physical condition (2004)

PubMed Central

Navarrete, Jessica Rojas; Pérez, Paloma Echevarría; Costa, César Leal

2018-01-01

ABSTRACT Objectives: cross-culturally adapt to the Spanish context and make a new proposal for the nursing outcome, Physical Condition (2004), of the Nursing Outcomes Classification (NOC) for its precise use in clinical practice. Method: a cross-cultural adaptation study and a proposal for the nursing outcome, Physical Condition, was conducted and supported by the opinion of 26 experts. The data was obtained through an electronic form, and a quantitative analysis was conducted, using the SPSS software. Results: the version adapted to the Spanish context was obtained and the proposal of the outcome, Physical Condition, received agreement from 26 experts, with a mean score greater than 7.6 for adequacy of the outcome definition and its indicators, and 8.5 for the relevance of the indicators. Conclusions: the version adapted to the Spanish context and a new proposal for Physical Condition were obtained. The results obtained indicate a high level of adequacy and relevance, an instrument of great utility in the clinic, and research was obtained to evaluate the interventions directed to the improvement of the physical condition. PMID:29791669

PlotXY: A High Quality Plotting System for the Herschel Interactive Processing Environment (HIPE) and the Astronomical Community

NASA Astrophysics Data System (ADS)

Panuzzo, P.; Li, J.; Caux, E.

2012-09-01

The Herschel Interactive Processing Environment (HIPE) was developed by the European Space Agency (ESA) in collaboration with NASA and the Herschel Instrument Control Centres, to provide the astronomical community a complete environment to process and analyze the data gathered by the Herschel Space Observatory. One of the most important components of HIPE is the plotting system (named PlotXY) that we present here. With PlotXY it is possible to produce easily high quality publication-ready 2D plots. It provides a long list of features, with fully configurable components, and interactive zooming. The entire code of HIPE is written in Java and is open source released under the GNU Lesser General Public License version 3. A new version of PlotXY is being developed to be independent from the HIPE code base; it is available to the software development community for the inclusion in other projects at the URL http://code.google.com/p/jplot2d/.

MATHEMATICAL MODEL OF ELECTROSTATIC PRECIPITATION FOR THE TEXAS INSTRUMENTS PROGRAMMABLE 59 CALCULATOR

EPA Science Inventory

The report describes a version of EPA's electrostatic precipitator (ESP) model suitable for use on a Texas Instruments Programmable 59 (TI-59) hand-held calculator. This version of the model allows the calculation of ESP collection efficiency, including corrections for non-ideal ...

Cross-cultural adaptation of an environmental health measurement instrument: Brazilian version of the health-care waste management • rapid assessment tool.

PubMed

Cozendey-Silva, Eliana Napoleão; da Silva, Cintia Ribeiro; Larentis, Ariane Leites; Wasserman, Julio Cesar; Rozemberg, Brani; Teixeira, Liliane Reis

2016-09-05

Periodic assessment is one of the recommendations for improving health-care waste management worldwide. This study aimed at translating and adapting the Health-Care Waste Management - Rapid Assessment Tool (HCWM-RAT), proposed by the World Health Organization, to a Brazilian Portuguese version, and resolving its cultural and legal issues. The work focused on the evaluation of the concepts, items and semantic equivalence between the original tool and the Brazilian Portuguese version. A cross-cultural adaptation methodology was used, including: initial translation to Brazilian Portuguese; back translation to English; syntheses of these translation versions; formation of an expert committee to achieve consensus about the preliminary version; and evaluation of the target audience's comprehension. Both the translated and the original versions' concepts, items and semantic equivalence are presented. The constructs in the original instrument were considered relevant and applicable to the Brazilian context. The Brazilian version of the tool has the potential to generate indicators, develop official database, feedback and subsidize political decisions at many geographical and organizational levels strengthening the Monitoring and evaluation (M&E) mechanism. Moreover, the cross-cultural translation expands the usefulness of the instrument to Portuguese-speaking countries in developing regions. The translated and original versions presented concept, item and semantic equivalence and can be applied to Brazil.

Montage Version 3.0

NASA Technical Reports Server (NTRS)

Jacob, Joseph; Katz, Daniel; Prince, Thomas; Berriman, Graham; Good, John; Laity, Anastasia

2006-01-01

The final version (3.0) of the Montage software has been released. To recapitulate from previous NASA Tech Briefs articles about Montage: This software generates custom, science-grade mosaics of astronomical images on demand from input files that comply with the Flexible Image Transport System (FITS) standard and contain image data registered on projections that comply with the World Coordinate System (WCS) standards. This software can be executed on single-processor computers, multi-processor computers, and such networks of geographically dispersed computers as the National Science Foundation s TeraGrid or NASA s Information Power Grid. The primary advantage of running Montage in a grid environment is that computations can be done on a remote supercomputer for efficiency. Multiple computers at different sites can be used for different parts of a computation a significant advantage in cases of computations for large mosaics that demand more processor time than is available at any one site. Version 3.0 incorporates several improvements over prior versions. The most significant improvement is that this version is accessible to scientists located anywhere, through operational Web services that provide access to data from several large astronomical surveys and construct mosaics on either local workstations or remote computational grids as needed.

Digital Control of the Czochralski Growth of Gallium Arsenide. System Reference Manual. Valid for Czochralski Growth Controller Software Version 2.4

DTIC Science & Technology

1988-01-04

Controller Routine .......... ........................ 405 -viii- ’ O, ...1 . • N SList of Illustrations i p List of Illustrations . Fig. 1: A...J------ - - - 6 - -- -w -- -w -r n . w ~ - P a CGCS Program Versions ~CGCS Program Versions This section describes the "evolution" of the...8217 ~- 134 - ,d" - 1’ , n "W , ’." " a 4 r P . ’ ,’ r t r 1 "."." , . L t * 5.1 CGCS Concept and Structure 5. The Czochralski Growth Control System Software

AMBER instrument control software

NASA Astrophysics Data System (ADS)

Le Coarer, Etienne P.; Zins, Gerard; Gluck, Laurence; Duvert, Gilles; Driebe, Thomas; Ohnaka, Keiichi; Heininger, Matthias; Connot, Claus; Behrend, Jan; Dugue, Michel; Clausse, Jean Michel; Millour, Florentin

2004-09-01

AMBER (Astronomical Multiple BEam Recombiner) is a 3 aperture interferometric recombiner operating between 1 and 2.5 um, for the Very Large Telescope Interferometer (VLTI). The control software of the instrument, based on the VLT Common Software, has been written to comply with specific features of the AMBER hardware, such as the Infrared detector read out modes or piezo stage drivers, as well as with the very specific operation modes of an interferomtric instrument. In this respect, the AMBER control software was designed to insure that all operations, from the preparation of the observations to the control/command of the instrument during the observations, would be kept as simple as possible for the users and operators, opening the use of an interferometric instrument to the largest community of astronomers. Peculiar attention was given to internal checks and calibration procedures both to evaluate data quality in real time, and improve the successes of long term UV plane coverage observations.

Influence analysis of Github repositories.

PubMed

Hu, Yan; Zhang, Jun; Bai, Xiaomei; Yu, Shuo; Yang, Zhuo

2016-01-01

With the support of cloud computing techniques, social coding platforms have changed the style of software development. Github is now the most popular social coding platform and project hosting service. Software developers of various levels keep entering Github, and use Github to save their public and private software projects. The large amounts of software developers and software repositories on Github are posing new challenges to the world of software engineering. This paper tries to tackle one of the important problems: analyzing the importance and influence of Github repositories. We proposed a HITS based influence analysis on graphs that represent the star relationship between Github users and repositories. A weighted version of HITS is applied to the overall star graph, and generates a different set of top influential repositories other than the results from standard version of HITS algorithm. We also conduct the influential analysis on per-month star graph, and study the monthly influence ranking of top repositories.

Patient-specific targeting guides compared with traditional instrumentation for glenoid component placement in shoulder arthroplasty: a multi-surgeon study in 70 arthritic cadaver specimens.

PubMed

Throckmorton, Thomas W; Gulotta, Lawrence V; Bonnarens, Frank O; Wright, Stephen A; Hartzell, Jeffrey L; Rozzi, William B; Hurst, Jason M; Frostick, Simon P; Sperling, John W

2015-06-01

The purpose of this study was to compare the accuracy of patient-specific guides for total shoulder arthroplasty (TSA) with traditional instrumentation in arthritic cadaver shoulders. We hypothesized that the patient-specific guides would place components more accurately than standard instrumentation. Seventy cadaver shoulders with radiographically confirmed arthritis were randomized in equal groups to 5 surgeons of varying experience levels who were not involved in development of the patient-specific guidance system. Specimens were then randomized to patient-specific guides based off of computed tomography scanning, standard instrumentation, and anatomic TSA or reverse TSA. Variances in version or inclination of more than 10° and more than 4 mm in starting point were considered indications of significant component malposition. TSA glenoid components placed with patient-specific guides averaged 5° of deviation from the intended position in version and 3° in inclination; those with standard instrumentation averaged 8° of deviation in version and 7° in inclination. These differences were significant for version (P = .04) and inclination (P = .01). Multivariate analysis of variance to compare the overall accuracy for the entire cohort (TSA and reverse TSA) revealed patient-specific guides to be significantly more accurate (P = .01) for the combined vectors of version and inclination. Patient-specific guides also had fewer instances of significant component malposition than standard instrumentation did. Patient-specific targeting guides were more accurate than traditional instrumentation and had fewer instances of component malposition for glenoid component placement in this multi-surgeon cadaver study of arthritic shoulders. Long-term clinical studies are needed to determine if these improvements produce improved functional outcomes. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Remotely Accessible Testbed for Software Defined Radio Development

NASA Technical Reports Server (NTRS)

Lux, James P.; Lang, Minh; Peters, Kenneth J.; Taylor, Gregory H.

2012-01-01

Previous development testbeds have assumed that the developer was physically present in front of the hardware being used. No provision for remote operation of basic functions (power on/off or reset) was made, because the developer/operator was sitting in front of the hardware, and could just push the button manually. In this innovation, a completely remotely accessible testbed has been created, with all diagnostic equipment and tools set up for remote access, and using standardized interfaces so that failed equipment can be quickly replaced. In this testbed, over 95% of the operating hours were used for testing without the developer being physically present. The testbed includes a pair of personal computers, one running Linux and one running Windows. A variety of peripherals is connected via Ethernet and USB (universal serial bus) interfaces. A private internal Ethernet is used to connect to test instruments and other devices, so that the sole connection to the outside world is via the two PCs. An important design consideration was that all of the instruments and interfaces used stable, long-lived industry standards, such as Ethernet, USB, and GPIB (general purpose interface bus). There are no plug-in cards for the two PCs, so there are no problems with finding replacement computers with matching interfaces, device drivers, and installation. The only thing unique to the two PCs is the locally developed software, which is not specific to computer or operating system version. If a device (including one of the computers) were to fail or become unavailable (e.g., a test instrument needed to be recalibrated), replacing it is a straightforward process with a standard, off-the-shelf device.

Children's Depression Inventory (CDI) and the Children's Depression Rating Scale-Revised (CDRS-R): reliability of the Hebrew version.

PubMed

Zalsman, Gil; Misgav, Sagit; Sommerfeld, Eliane; Kohn, Yoav; Brunstein-Klomek, Anat; Diller, Robyne; Sher, Leo; Schwartz, Joseph; Shoval, Gal; Ben-Dor, David H; Wolovik, Luisa; Oquendo, Maria A

2005-01-01

The Children's Depression Inventory (CDI) and Children's Depression Rating Scale-Revised (CDRS-R) are two widely used instruments, which measure depression in children and adolescents. This pilot study assessed the reliability of the Hebrew versions of these two instruments. Both CDRS-R and CDI were translated from English into Hebrew and then back translated. Seventeen healthy Israeli bilingual children volunteers were interviewed with both scales with a one day intermission between the interviews. Non-parametric correlations were used to compare scores in the two versions for each item. Results showed high agreement between the two versions for almost all items of the CDI and moderate to high for the CDRS-R. When CDRS-R summary scores for each item were compared, the agreement was high for this instrument as well. It is concluded that both CDI and CDRS-R Hebrew versions are reliable and can be used for studies of depression in the Israeli pediatric population.

Brazilian Portuguese version of the Anger Rumination Scale (ARS-Brazil).

PubMed

Sperotto, Daniela; Manfro, Arthur Gus; Axelrud, Luiza Kvitko; Manfro, Pedro Henrique; Salum, Giovanni Abrahão; DeSousa, Diogo Araújo

2018-03-01

Objective To describe the cross-cultural adaptation of the Anger Rumination Scale (ARS) for use in Brazil. Methods The cross-cultural adaptation followed a four-step process, based on specialized literature: 1) investigation of conceptual and item equivalence; 2) translation and back-translation; 3) pretest; and 4) investigation of operational equivalence. Results A final Brazilian version of the instrument (ARS-Brazil) was defined and is presented. Pretest results revealed that the instrument was generally well understood by adults as well as indicated a few modifications that were included in the final version presented here. Conclusion The Brazilian Portuguese version of the ARS seems to be very similar to the original ARS in terms of conceptual and item equivalence, semantics, and operational equivalence, suggesting that future cross-cultural studies may benefit from this early version. As a result, a new instrument is now available for the assessment of rumination symptoms of anger and irritability for adults in community, clinical, and research settings.

Dynamic Assembly, Assessment, Assurance, and Adaptation via Heterogeneous Software Connectors

DTIC Science & Technology

2004-10-01

Versioning Connectors (MVC) Representative of runtime monitoring gauges are multiversioning gauges, which monitor and analyze different versions of...multiple versions of the same component must be merged by the connector before they are forwarded to their target components. The multiversioning

[German version of a validated instrument to measure the quality of life in patients with hypertension].

PubMed

Chrubasik, C; Himmelberger, D; Kohlmann, T; Chrubasik, S

2012-08-01

The aim of this study was to prepare according to standardised criteria a German version of the validated short instrument for the quality of life in patients suffering from hypertension. This instrument is appropriate for clinical trials investigating the effectiveness of antihypertensive treatments. But also in the daily routine this instrument enables one to identify any impairment of life quality due to antihypertensive treatment as early as possible, especially sexual dysfunction, and to react appropriately with treatment adaptations. © Georg Thieme Verlag KG Stuttgart · New York.

User's Manual for LEWICE Version 3.2

NASA Technical Reports Server (NTRS)

Wright, William

2008-01-01

A research project is underway at NASA Glenn to produce a computer code which can accurately predict ice growth under a wide range of meteorological conditions for any aircraft surface. This report will present a description of the code inputs and outputs from version 3.2 of this software, which is called LEWICE. This version differs from release 2.0 due to the addition of advanced thermal analysis capabilities for de-icing and anti-icing applications using electrothermal heaters or bleed air applications, the addition of automated Navier-Stokes analysis, an empirical model for supercooled large droplets (SLD) and a pneumatic boot option. An extensive effort was also undertaken to compare the results against the database of electrothermal results which have been generated in the NASA Glenn Icing Research Tunnel (IRT) as was performed for the validation effort for version 2.0. This report will primarily describe the features of the software related to the use of the program. Appendix A has been included to list some of the inner workings of the software or the physical models used. This information is also available in the form of several unpublished documents internal to NASA. This report is intended as a replacement for all previous user manuals of LEWICE. In addition to describing the changes and improvements made for this version, information from previous manuals may be duplicated so that the user will not need to consult previous manuals to use this software.

Development process and initial validation of the Ethical Conflict in Nursing Questionnaire-Critical Care Version

PubMed Central

2013-01-01

Background Ethical conflicts are arising as a result of the growing complexity of clinical care, coupled with technological advances. Most studies that have developed instruments for measuring ethical conflict base their measures on the variables ‘frequency’ and ‘degree of conflict’. In our view, however, these variables are insufficient for explaining the root of ethical conflicts. Consequently, the present study formulates a conceptual model that also includes the variable ‘exposure to conflict’, as well as considering six ‘types of ethical conflict’. An instrument was then designed to measure the ethical conflicts experienced by nurses who work with critical care patients. The paper describes the development process and validation of this instrument, the Ethical Conflict in Nursing Questionnaire Critical Care Version (ECNQ-CCV). Methods The sample comprised 205 nursing professionals from the critical care units of two hospitals in Barcelona (Spain). The ECNQ-CCV presents 19 nursing scenarios with the potential to produce ethical conflict in the critical care setting. Exposure to ethical conflict was assessed by means of the Index of Exposure to Ethical Conflict (IEEC), a specific index developed to provide a reference value for each respondent by combining the intensity and frequency of occurrence of each scenario featured in the ECNQ-CCV. Following content validity, construct validity was assessed by means of Exploratory Factor Analysis (EFA), while Cronbach’s alpha was used to evaluate the instrument’s reliability. All analyses were performed using the statistical software PASW v19. Results Cronbach’s alpha for the ECNQ-CCV as a whole was 0.882, which is higher than the values reported for certain other related instruments. The EFA suggested a unidimensional structure, with one component accounting for 33.41% of the explained variance. Conclusions The ECNQ-CCV is shown to a valid and reliable instrument for use in critical care units. Its structure is such that the four variables on which our model of ethical conflict is based may be studied separately or in combination. The critical care nurses in this sample present moderate levels of exposure to ethical conflict. This study represents the first evaluation of the ECNQ-CCV. PMID:23725477

The DBBC environment for millimeter radioastronomy

NASA Astrophysics Data System (ADS)

Tuccari, Gino; Comoretto, Giovanni; Melis, Andrea; Buttaccio, Salvo

2012-09-01

The Digital Base Band Converter project developed in the last decade produced a general architecture and a class of boards, firmware and software, giving the possibility to build a general purpose back-end system for VLBI or single-dish observational activities. Such approach suggests the realization of a digital radio system, i.e. a receiver with conversion not realized with analogue techniques, maintaining only amplification stages in the analogue domain. This solution can be applied until a maximum around 16 GHz, the present limit for the instantaneous input band in the latest version of the DBBC project, while in the millimeter frequency range this maximum limit of 0.5-2 GHz of the previous versions allows the intermediate frequency to be processed in the digital domain. A description of the elements developed in the DBBC project is presented, with their use in different environments. The architecture is composed of a PC controlled mainframe, and of different modules that can be combined in a very flexible way in order to realize different instruments. The instrument can be expanded or retrofitted to meet increasing observational demands. Available modules include ADC converters, processing boards, physical interfaces (VSI and 10G Ethernet). Several applications have already been implemented and used in radioastronomic observations: a DDC (Direct Digital Conversion) for VLBI observations, a Polyphase Digital Filter Bank, and a Multiband Scansion Spectrometer. Other applications are currently studied for additional functionalities like a spectropolarimeter, a linear-to-circular polarization converter, a RFI-mitigation tool, and a phase-reference holographic tool-kit.

Source Code Analysis Laboratory (SCALe)

DTIC Science & Technology

2012-04-01

Versus Flagged Nonconformities (FNC) Software System TP/FNC Ratio Mozilla Firefox version 2.0 6/12 50% Linux kernel version 2.6.15 10/126 8...is inappropriately tuned for analysis of the Linux kernel, which has anomalous results. Customizing SCALe to work with software for a particular...servers support a collection of virtual machines (VMs) that can be configured to support analysis in various environments, such as Windows XP and Linux . A

A new vector radiative transfer model as a part of SCIATRAN 3.0 software package.

NASA Astrophysics Data System (ADS)

Rozanov, Alexei; Rozanov, Vladimir; Burrows, John P.

The SCIATRAN 3.0 package is a result of further development of the SCIATRAN 2.x software family which, similar to previous versions, comprises a radiative transfer model and a retrieval block. A major improvement was achieved in comparison to previous software versions by adding the vector mode to the radiative transfer model. Thus, the well-established Discrete Ordinate solver can now be run in the vector mode to calculate the scattered solar radiation including polarization, i.e., to simulate all four components of the Stockes vector. Similar to the scalar version, the simulations can be performed for any viewing geometry typical for atmospheric observations in the UV-Vis-NIR spectral range (nadir, limb, off-axis, etc.) as well as for any observer position within or outside the Earth's atmosphere. Similar to the precursor version, the new model is freely available for non-commercial use via the web page of the University of Bremen. In this presentation a short description of the software package, especially of the new vector radiative transfer model will be given, including remarks on the availability for the scientific community. Furthermore, comparisons to other vector models will be shown and some example problems will be considered where the polarization of the observed radiation must be accounted for to obtain high quality results.

Italian Version of the Self-Description Questionnaire-III.

ERIC Educational Resources Information Center

Maggi, Stefania

2001-01-01

Developed an Italian version of the Self-Description Questionnaire (SDQ-III) and studied the reliability and factorial validity of this translated instrument. Results show that the translated version has psychometric properties similar to those of the original English version. (SLD)

Separation of Acids, Bases, and Neutral Compounds

NASA Astrophysics Data System (ADS)

Fujita, Megumi; Mah, Helen M.; Sgarbi, Paulo W. M.; Lall, Manjinder S.; Ly, Tai Wei; Browne, Lois M.

2003-01-01

Separation of Acids, Bases, and Neutral Compounds requires the following software, which is available for free download from the Internet: Netscape Navigator, version 4.75 or higher, or Microsoft Internet Explorer, version 5.0 or higher; Chime plug-in, version compatible with your OS and browser (available from MDL); and Flash player, version 5 or higher (available from Macromedia).

Installing the Unix Starlink Software

NASA Astrophysics Data System (ADS)

Bly, M. J.

This note is the release note and installation instructions for the DEC Alpha AXP / Digital UNIX, Sun Sparc / Solaris v2.x, and Sun Sparc / SunOS 4.1.x versions of the Starlink Software Collection (USSC). You will be supplied with pre-built (and installed) versions on tape and will just need to copy the tape to disk to have a working version. The tapes (where appropriate) will contain in addition, copies of the NAG and MEMSYS libraries, and Tcl, Tk, Expect, Mosaic, TeX, Pine, Perl, Jed, Ispell, Ghostscript, LaXeX2html and Ftnchek for the relevant system. The Sun Sparc SunOS 4.1.x version of the USSC was frozen at USSC111 and no further updates are available. The instructions for installing the main section of the USSC may continue to be used for installing Sun Sparc SunOS 4.1.x version.

Epi info - present and future.

PubMed

Su, Y; Yoon, S S

2003-01-01

Epi Info is a suite of public domain computer programs for public health professionals developed by the Centers for Disease Control and Prevention (CDC). Epi Info is used for rapid questionnaire design, data entry and validation, data analysis including mapping and graphing, and creation of reports. Epi Info was originally created in 1985 using Turbo Pascal. In 1998, the last version of Epi Info for DOS, version 6, was released. Epi Info for DOS is currently supported by CDC but is no longer updated. The current version, Epi Info 2002, is Windows-based software developed using Microsoft Visual Basic. Approximately 300,000 downloads of Epi Info software occurred in 2002 from approximately 130 countries. These numbers make Epi Info probably one of the most widely distributed and used public domain programs in the world. The DOS version of Epi Info was translated into 13 languages, and efforts are underway to translate the Windows version into other major languages. Versions already exist for Spanish, French, Portuguese, Chinese, Japanese, and Arabic.

Probabilistic consensus scoring improves tandem mass spectrometry peptide identification.

PubMed

Nahnsen, Sven; Bertsch, Andreas; Rahnenführer, Jörg; Nordheim, Alfred; Kohlbacher, Oliver

2011-08-05

Database search is a standard technique for identifying peptides from their tandem mass spectra. To increase the number of correctly identified peptides, we suggest a probabilistic framework that allows the combination of scores from different search engines into a joint consensus score. Central to the approach is a novel method to estimate scores for peptides not found by an individual search engine. This approach allows the estimation of p-values for each candidate peptide and their combination across all search engines. The consensus approach works better than any single search engine across all different instrument types considered in this study. Improvements vary strongly from platform to platform and from search engine to search engine. Compared to the industry standard MASCOT, our approach can identify up to 60% more peptides. The software for consensus predictions is implemented in C++ as part of OpenMS, a software framework for mass spectrometry. The source code is available in the current development version of OpenMS and can easily be used as a command line application or via a graphical pipeline designer TOPPAS.

SEDS1 mission software verification using a signal simulator

NASA Technical Reports Server (NTRS)

Pierson, William E.

1992-01-01

The first flight of the Small Expendable Deployer System (SEDS1) is schedule to fly as the secondary payload of a Delta 2 in March, 1993. The objective of the SEDS1 mission is to collect data to validate the concept of tethered satellite systems and to verify computer simulations used to predict their behavior. SEDS1 will deploy a 50 lb. instrumented satellite as an end mass using a 20 km tether. Langley Research Center is providing the end mass instrumentation, while the Marshall Space Flight Center is designing and building the deployer. The objective of the experiment is to test the SEDS design concept by demonstrating that the system will satisfactorily deploy the full 20 km tether without stopping prematurely, come to a smooth stop on the application of a brake, and cut the tether at the proper time after it swings to the local vertical. Also, SEDS1 will collect data which will be used to test the accuracy of tether dynamics models used to stimulate this type of deployment. The experiment will last about 1.5 hours and complete approximately 1.5 orbits. Radar tracking of the Delta II and end mass is planned. In addition, the SEDS1 on-board computer will continuously record, store, and transmit mission data over the Delta II S-band telemetry system. The Data System will count tether windings as the tether unwinds, log the times of each turn and other mission events, monitor tether tension, and record the temperature of system components. A summary of the measurements taken during the SEDS1 are shown. The Data System will also control the tether brake and cutter mechanisms. Preliminary versions of two major sections of the flight software, the data telemetry modules and the data collection modules, were developed and tested under the 1990 NASA/ASEE Summer Faculty Fellowship Program. To facilitate the debugging of these software modules, a prototype SEDS Data System was programmed to simulate turn count signals. During the 1991 summer program, the concept of simulating signals produced by the SEDS electronics systems and circuits was expanded and more precisely defined. During the 1992 summer program, the SEDS signal simulator was programmed to test the requirements of the SEDS Mission software, and this simulator will be used in the formal verification of the SEDS Mission Software. The formal test procedures specification was written which incorporates the use of the signal simulator to test the SEDS Mission Software and which incorporates procedures for testing the other major component of the SEDS software, the Monitor Software.

Software to model AXAF-I image quality

NASA Technical Reports Server (NTRS)

Ahmad, Anees; Feng, Chen

1995-01-01

A modular user-friendly computer program for the modeling of grazing-incidence type x-ray optical systems has been developed. This comprehensive computer software GRAZTRACE covers the manipulation of input data, ray tracing with reflectivity and surface deformation effects, convolution with x-ray source shape, and x-ray scattering. The program also includes the capabilities for image analysis, detector scan modeling, and graphical presentation of the results. A number of utilities have been developed to interface the predicted Advanced X-ray Astrophysics Facility-Imaging (AXAF-I) mirror structural and thermal distortions with the ray-trace. This software is written in FORTRAN 77 and runs on a SUN/SPARC station. An interactive command mode version and a batch mode version of the software have been developed.

Instrument control software development process for the multi-star AO system ARGOS

NASA Astrophysics Data System (ADS)

Kulas, M.; Barl, L.; Borelli, J. L.; Gässler, W.; Rabien, S.

2012-09-01

The ARGOS project (Advanced Rayleigh guided Ground layer adaptive Optics System) will upgrade the Large Binocular Telescope (LBT) with an AO System consisting of six Rayleigh laser guide stars. This adaptive optics system integrates several control loops and many different components like lasers, calibration swing arms and slope computers that are dispersed throughout the telescope. The purpose of the instrument control software (ICS) is running this AO system and providing convenient client interfaces to the instruments and the control loops. The challenges for the ARGOS ICS are the development of a distributed and safety-critical software system with no defects in a short time, the creation of huge and complex software programs with a maintainable code base, the delivery of software components with the desired functionality and the support of geographically distributed project partners. To tackle these difficult tasks, the ARGOS software engineers reuse existing software like the novel middleware from LINC-NIRVANA, an instrument for the LBT, provide many tests at different functional levels like unit tests and regression tests, agree about code and architecture style and deliver software incrementally while closely collaborating with the project partners. Many ARGOS ICS components are already successfully in use in the laboratories for testing ARGOS control loops.

Psychometric Properties of the Persian Language Version of Yang Internet Addiction Questionnaire: An Explanatory Factor Analysis.

PubMed

Mohammadsalehi, Narges; Mohammadbeigi, Abolfazl; Jadidi, Rahmatollah; Anbari, Zohreh; Ghaderi, Ebrahim; Akbari, Mojtaba

2015-09-01

Reliability and validity are the key concepts in measurement processes. Young internet addiction test (YIAT) is regarded as a valid and reliable questionnaire in English speaking countries for diagnosis of Internet-related behavior disorders. This study aimed at validating the Persian version of YIAT in the Iranian society. A pilot and a cross-sectional study were conducted on 28 and 254 students of Qom University of Medical Sciences, respectively, in order to validate the Persian version of YIAT. Forward and backward translations were conducted to develop a Persian version of the scale. Reliability was measured by test-retest, Cronbach's alpha and interclass correlation coefficient (ICC). Face, content and construct validity were approved by the importance score index, content validity ratio (CVR), content validity index (CVI), correlation matrix and factor analysis. The SPSS software was used for data analysis. The Cronbach's alpha was 0.917 (CI 95%; 0.901 - 0.931). The average of scale-level CVI was calculated to be 0.74; the CVI index for each item was higher than 0.83 and the average of CVI index was equal to 0.89. Factor analysis extracted three factors including personal activities disorder (PAD), emotional and mood disorder (EMD) and social activities disorder (SAD), with more than 55.8% of total variances. The ICC for different factors of Persian version of Young Questionnaire including PAD, EMD and for SAD was r = 0.884; CI 95%; 0.861 - 0.904, r = 0.766; CI 95%; 0.718 - 0.808 and r = 0.745; CI 95%; 0.686 - 0.795, respectively. Our study showed that the Persian version of YIAT is good and usable on Iranian people. The reliability of the instrument was very good. Moreover, the validity of the Persian translated version of the scale was sufficient. In addition, the reliability and validity of the three extracted factors of YIAT were evaluated and were acceptable.

Psychometric Properties of the Persian Language Version of Yang Internet Addiction Questionnaire: An Explanatory Factor Analysis

PubMed Central

Mohammadsalehi, Narges; Mohammadbeigi, Abolfazl; Jadidi, Rahmatollah; Anbari, Zohreh; Ghaderi, Ebrahim; Akbari, Mojtaba

2015-01-01

Background: Reliability and validity are the key concepts in measurement processes. Young internet addiction test (YIAT) is regarded as a valid and reliable questionnaire in English speaking countries for diagnosis of Internet-related behavior disorders. Objectives: This study aimed at validating the Persian version of YIAT in the Iranian society. Patients and Methods: A pilot and a cross-sectional study were conducted on 28 and 254 students of Qom University of Medical Sciences, respectively, in order to validate the Persian version of YIAT. Forward and backward translations were conducted to develop a Persian version of the scale. Reliability was measured by test-retest, Cronbach’s alpha and interclass correlation coefficient (ICC). Face, content and construct validity were approved by the importance score index, content validity ratio (CVR), content validity index (CVI), correlation matrix and factor analysis. The SPSS software was used for data analysis. Results: The Cronbach’s alpha was 0.917 (CI 95%; 0.901 - 0.931). The average of scale-level CVI was calculated to be 0.74; the CVI index for each item was higher than 0.83 and the average of CVI index was equal to 0.89. Factor analysis extracted three factors including personal activities disorder (PAD), emotional and mood disorder (EMD) and social activities disorder (SAD), with more than 55.8% of total variances. The ICC for different factors of Persian version of Young Questionnaire including PAD, EMD and for SAD was r = 0.884; CI 95%; 0.861 - 0.904, r = 0.766; CI 95%; 0.718 - 0.808 and r = 0.745; CI 95%; 0.686 - 0.795, respectively. Conclusions: Our study showed that the Persian version of YIAT is good and usable on Iranian people. The reliability of the instrument was very good. Moreover, the validity of the Persian translated version of the scale was sufficient. In addition, the reliability and validity of the three extracted factors of YIAT were evaluated and were acceptable. PMID:26495253

Creating a Computer Adaptive Test Version of the Late-Life Function & Disability Instrument

PubMed Central

Jette, Alan M.; Haley, Stephen M.; Ni, Pengsheng; Olarsch, Sippy; Moed, Richard

2009-01-01

Background This study applied Item Response Theory (IRT) and Computer Adaptive Test (CAT) methodologies to develop a prototype function and disability assessment instrument for use in aging research. Herein, we report on the development of the CAT version of the Late-Life Function & Disability instrument (Late-Life FDI) and evaluate its psychometric properties. Methods We employed confirmatory factor analysis, IRT methods, validation, and computer simulation analyses of data collected from 671 older adults residing in residential care facilities. We compared accuracy, precision, and sensitivity to change of scores from CAT versions of two Late-Life FDI scales with scores from the fixed-form instrument. Score estimates from the prototype CAT versus the original instrument were compared in a sample of 40 older adults. Results Distinct function and disability domains were identified within the Late-Life FDI item bank and used to construct two prototype CAT scales. Using retrospective data, scores from computer simulations of the prototype CAT scales were highly correlated with scores from the original instrument. The results of computer simulation, accuracy, precision, and sensitivity to change of the CATs closely approximated those of the fixed-form scales, especially for the 10- or 15-item CAT versions. In the prospective study each CAT was administered in less than 3 minutes and CAT scores were highly correlated with scores generated from the original instrument. Conclusions CAT scores of the Late-Life FDI were highly comparable to those obtained from the full-length instrument with a small loss in accuracy, precision, and sensitivity to change. PMID:19038841

COSMIC monthly progress report

NASA Technical Reports Server (NTRS)

1993-01-01

Activities of the Computer Software Management and Information Center (COSMIC) are summarized for the month of August, 1993. Tables showing the current inventory of programs available from COSMIC are presented and program processing and evaluation activities are discussed. Ten articles were prepared for publication in the NASA Tech Brief Journal. These articles (included in this report) describe the following software items: (1) MOM3D - A Method of Moments Code for Electromagnetic Scattering (UNIX Version); (2) EM-Animate - Computer Program for Displaying and Animating the Steady-State Time-Harmonic Electromagnetic Near Field and Surface-Current Solutions; (3) MOM3D - A Method of Moments Code for Electromagnetic Scattering (IBM PC Version); (4) M414 - MIL-STD-414 Variable Sampling Procedures Computer Program; (5) MEDOF - Minimum Euclidean Distance Optimal Filter; (6) CLIPS 6.0 - C Language Integrated Production System, Version 6.0 (Macintosh Version); (7) CLIPS 6.0 - C Language Integrated Production System, Version 6.0 (IBM PC Version); (8) CLIPS 6.0 - C Language Integrated Production System, Version 6.0 (UNIX Version); (9) CLIPS 6.0 - C Language Integrated Production System, Version 6.0 (DEC VAX VMS Version); and (10) TFSSRA - Thick Frequency Selective Surface with Rectangular Apertures. Activities in the areas of marketing, customer service, benefits identification, maintenance and support, and dissemination are also described along with a budget summary.

High efficiency conical scanner for earth resources applications

NASA Technical Reports Server (NTRS)

Bates, J. C.; Dumas, H. J., Jr.

1975-01-01

A description is given of a six-arm conical scanner which was selected to provide a continuous line-of-sight scan. Two versions of the instrument are considered. The two versions differ in their weight. The weight of the heavy version is 600 lbs. A light weight design which employs beryllium and aluminum optical components weighs only 350 lbs. A multiplexer and analog-to-digital converter are to be incorporated into the design. Questions of instrument performance are also discussed.

Challenges in Managing Trustworthy Large-scale Digital Science

NASA Astrophysics Data System (ADS)

Evans, B. J. K.

2017-12-01

The increased use of large-scale international digital science has opened a number of challenges for managing, handling, using and preserving scientific information. The large volumes of information are driven by three main categories - model outputs including coupled models and ensembles, data products that have been processing to a level of usability, and increasingly heuristically driven data analysis. These data products are increasingly the ones that are usable by the broad communities, and far in excess of the raw instruments data outputs. The data, software and workflows are then shared and replicated to allow broad use at an international scale, which places further demands of infrastructure to support how the information is managed reliably across distributed resources. Users necessarily rely on these underlying "black boxes" so that they are productive to produce new scientific outcomes. The software for these systems depend on computational infrastructure, software interconnected systems, and information capture systems. This ranges from the fundamentals of the reliability of the compute hardware, system software stacks and libraries, and the model software. Due to these complexities and capacity of the infrastructure, there is an increased emphasis of transparency of the approach and robustness of the methods over the full reproducibility. Furthermore, with large volume data management, it is increasingly difficult to store the historical versions of all model and derived data. Instead, the emphasis is on the ability to access the updated products and the reliability by which both previous outcomes are still relevant and can be updated for the new information. We will discuss these challenges and some of the approaches underway that are being used to address these issues.

Measuring Pragmatic Skills: Early Detection of Infants at Risk for Communication Problems

ERIC Educational Resources Information Center

Cocquyt, Mie; Mommaerts, Maurice Yves; Dewart, Hazel; Zink, Inge

2015-01-01

Background: For the early detection of children who are at risk of communication problems, we need appropriate assessment instruments. Two Dutch-language standardised screening instruments are available: the Dutch version of the Non Speech Test (NNST) and the Dutch version of the MacArthur Communicative Development Inventories (N-CDIs). These…

AF-GEOSPACE Version 2.1

NASA Astrophysics Data System (ADS)

Hilmer, R. V.; Ginet, G. P.; Hall, T.; Holeman, E.; Madden, D.; Tautz, M.; Roth, C.

2004-05-01

AF-GEOSpace is a graphics-intensive software program with space environment models and applications developed and distributed by the Space Weather Center of Excellence at AFRL. A review of current (Version 2.0) and planned (Version 2.1) AF-GEOSpace capabilities will be given. A wide range of physical domains is represented enabling the software to address such things as solar disturbance propagation, radiation belt configuration, and ionospheric auroral particle precipitation and scintillation. The software is currently being used to aid with the design, operation, and simulation of a wide variety of communications, navigation, and surveillance systems. Building on the success of previous releases, AF-GEOSpace has become a platform for the rapid prototyping of automated operational and simulation space weather visualization products and helps with a variety of tasks, including: orbit specification for radiation hazard avoidance; satellite design assessment and post-event anomaly analysis; solar disturbance effects forecasting; frequency and antenna management for radar and HF communications; determination of link outage regions for active ionospheric conditions; scientific model validation and comparison, physics research, and education. Version 2.0 provided a simplified graphical user interface, improved science and application modules, and significantly enhanced graphical performance. Common input data archive sets, application modules, and 1-D, 2-D, and 3-D visualization tools are provided to all models. Dynamic capabilities permit multiple environments to be generated at user-specified time intervals while animation tools enable displays such as satellite orbits and environment data together as a function of time. Building on the existing Version 2.0 software architecture, AF-GEOSpace Version 2.1 is currently under development and will include a host of new modules to provide, for example, geosynchronous charged particle fluxes, neutral atmosphere densities, cosmic ray cutoff maps, low-altitude trapped proton belt specification, and meteor shower/storm fluxes with spacecraft impact probabilities. AF-GEOSpace Version 2.1 is being developed for Windows NT/2000/XP and Linux systems.

75 FR 16817 - Meeting for Software Developers on the Technical Specifications for Common Formats for Patient...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-02

... Software Developers on the Technical Specifications for Common Formats for Patient Safety Data Collection... software developers can provide input on these technical specifications for the Common Formats Version 1.1... specifications, which provide direction to software developers that plan to implement the Common Formats...

Design and Development of Basic Physical Layer WiMAX Network Simulation Models

DTIC Science & Technology

2009-01-01

Wide Web . The third software version was developed during the period of 22 August to 4 November, 2008. The software version developed during the...researched on the Web . The mathematics of some fundamental concepts such as Fourier transforms, convolutional coding techniques were also reviewed...Mathworks Matlab users’ website. A simulation model was found, entitled Estudio y Simulacion de la capa Jisica de la norma 802.16 ( Sistema WiMAX) developed

Psychometric Properties of the Malay Version of the Dutch Eating Behaviour Questionnaire (DEBQ) in a Sample of Malaysian Adults Attending a Health Care Facility.

PubMed

Subramaniam, Kavitha; Low, Wah Yun; Chinna, Karuthan; Chin, Kin Fah; Krishnaswamy, Saroja

2017-08-01

This study aims to investigate the psychometric properties of the Malay version of the Dutch Eating Behaviour Questionnaire (DEBQ) among Malaysian adults. The Malay version of the DEBQ instrument was administered to 398 outpatients (269 women and 129 men) at the University of Malaya Medical Centre (UMMC). Confirmatory Factor Analysis (CFA) was conducted to study the construct validity of the instrument. Composite reliability coefficient, Raykov's rho, was used to determine the internal consistency. The proposed three-factor structure for the DEBQ instrument was appropriate, although three items (Items 21, 14 and 27) showed problematic loadings with inappropriate model fit and were removed. The modified version had an appropriate model fit χ 2 /df = 2.129, TLI = 0.908, CFI = 0.918, RMSEA = 0.053 (90%CI = 0.048-0.058), close-fit P -value = 0.136 and satisfactory internal consistency of 0.914 for emotional eating scale, 0.819 for external eating scale and 0.856 for restrained eating scale. The Malay version of the DEBQ is a valid instrument to study eating behaviour traits among Malaysian adults. Further research is warranted to determine if Items 14 and 27 are appropriate for the Malaysian population.

Benchmark Dose Software (BMDS) Development and ...

EPA Pesticide Factsheets

This report is intended to provide an overview of beta version 1.0 of the implementation of a model of repeated measures data referred to as the Toxicodiffusion model. The implementation described here represents the first steps towards integration of the Toxicodiffusion model into the EPA benchmark dose software (BMDS). This version runs from within BMDS 2.0 using an option screen for making model selection, as is done for other models in the BMDS 2.0 suite. This report is intended to provide an overview of beta version 1.0 of the implementation of a model of repeated measures data referred to as the Toxicodiffusion model.

Investigation of the Finite Element Software Packages at KSC

NASA Technical Reports Server (NTRS)

Lu, Chu-Ho

1991-01-01

The useful and powerful features of NASTRAN and three real world problems for the testing of the capabilities of different NASTRAN versions are discussed. The test problems involve direct transient analysis, nonlinear analysis, and static analysis. The experiences in using graphics software packages are also discussed. It was found that MSC/XL can be more useful if it can be improved to generate picture files of the analysis results and to extend its capabilities to support finite element codes other than MSC/NASTRAN. It was found that the current version of SDRC/I-DEAS (version VI) may have bugs in the module 'Data Loader'.

Analysis of key technologies for virtual instruments metrology

NASA Astrophysics Data System (ADS)

Liu, Guixiong; Xu, Qingui; Gao, Furong; Guan, Qiuju; Fang, Qiang

2008-12-01

Virtual instruments (VIs) require metrological verification when applied as measuring instruments. Owing to the software-centered architecture, metrological evaluation of VIs includes two aspects: measurement functions and software characteristics. Complexity of software imposes difficulties on metrological testing of VIs. Key approaches and technologies for metrology evaluation of virtual instruments are investigated and analyzed in this paper. The principal issue is evaluation of measurement uncertainty. The nature and regularity of measurement uncertainty caused by software and algorithms can be evaluated by modeling, simulation, analysis, testing and statistics with support of powerful computing capability of PC. Another concern is evaluation of software features like correctness, reliability, stability, security and real-time of VIs. Technologies from software engineering, software testing and computer security domain can be used for these purposes. For example, a variety of black-box testing, white-box testing and modeling approaches can be used to evaluate the reliability of modules, components, applications and the whole VI software. The security of a VI can be assessed by methods like vulnerability scanning and penetration analysis. In order to facilitate metrology institutions to perform metrological verification of VIs efficiently, an automatic metrological tool for the above validation is essential. Based on technologies of numerical simulation, software testing and system benchmarking, a framework for the automatic tool is proposed in this paper. Investigation on implementation of existing automatic tools that perform calculation of measurement uncertainty, software testing and security assessment demonstrates the feasibility of the automatic framework advanced.

Diet History Questionnaire: Suggested Citations

Cancer.gov

Use of the Diet History Questionnaire and Diet*Calc Analysis Software for publication purposes should contain a citation which includes version information for the software, questionnaire, and nutrient database.

Safeguards Technology Factsheet - Unattended Dual Current Monitor (UDCM)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Newell, Matthew R.

2016-04-13

The UDCM is a low-current measurement device designed to record sub-nano-amp to micro-amp currents from radiation detectors. The UDCM is a two-channel device that incorporates a Commercial-Off-The-Shelf (COTS) processor enabling both serial over USB as well as Ethernet communications. The instrument includes microSD and USB flash memory for data storage as well as a programmable High Voltage (HV) power supply for detector bias. The UDCM is packaged in the same enclosure, employs the same processor and has a similar user interface as the UMSR. A serial over USB communication line to the UDCM allows the use of existing versions ofmore » MIC software, while the Ethernet port is compatible with the new IAEA RAINSTORM communication protocol.« less

MC ray-tracing optimization of lobster-eye focusing devices with RESTRAX

NASA Astrophysics Data System (ADS)

Šaroun, Jan; Kulda, Jiří

2006-11-01

The enhanced functionalities of the latest version of the RESTRAX software, providing a high-speed Monte Carlo (MC) ray-tracing code to represent a virtual three-axis neutron spectrometer, include representation of parabolic and elliptic guide profiles and facilities for numerical optimization of parameter values, characterizing the instrument components. As examples, we present simulations of a doubly focusing monochromator in combination with cold neutron guides and lobster-eye supermirror devices, concentrating a monochromatic beam to small sample volumes. A Levenberg-Marquardt minimization algorithm is used to optimize simultaneously several parameters of the monochromator and lobster-eye guides. We compare the performance of optimized configurations in terms of monochromatic neutron flux and energy spread and demonstrate the effect of lobster-eye optics on beam transformations in real and momentum subspaces.

LC-IM-TOF Instrument Control & Data Visualization Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

2011-05-12

Liquid Chromatography-Ion Mobility-time of Flight Instrument Control and Data Visualization software is designed to control instrument voltages for the Ion Mobility drift tube. It collects and stores information collected from the Agilent TOF instrument and analyses/displays the ion intensity information acquired. The software interface can be split into 3 categories -- Instrument Settings/Controls, Data Acquisition, and Viewer. The Instrument Settings/Controls prepares the instrument for Data Acquisition. The Viewer contains common objects that are used by Instrument Settings/Controls and Data Acquisition. Intensity information is collected in 1 nanosec bins and separated by TOF pulses called scans. A collection of scans aremore » stored side by side making up an accumulation. In order for the computer to keep up with the stream of data, 30-50 accumulations are commonly summed into a single frame. A collection of frames makes up an experiment. The Viewer software then takes the experiment and presents the data in several possible ways, each frame can be viewed in TOF bins or m/z (mass to charge ratio). The experiment can be viewed frame by frame, merging several frames, or by viewing the peak chromatogram. The user can zoom into the data, export data, and/or animate frames. Additional features include calibration of the data and even post-processing multiplexed data.« less

CaveMan Enterprise version 1.0 Software Validation and Verification.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, David

The U.S. Department of Energy Strategic Petroleum Reserve stores crude oil in caverns solution-mined in salt domes along the Gulf Coast of Louisiana and Texas. The CaveMan software program has been used since the late 1990s as one tool to analyze pressure mea- surements monitored at each cavern. The purpose of this monitoring is to catch potential cavern integrity issues as soon as possible. The CaveMan software was written in Microsoft Visual Basic, and embedded in a Microsoft Excel workbook; this method of running the CaveMan software is no longer sustainable. As such, a new version called CaveMan Enter- prisemore » has been developed. CaveMan Enterprise version 1.0 does not have any changes to the CaveMan numerical models. CaveMan Enterprise represents, instead, a change from desktop-managed work- books to an enterprise framework, moving data management into coordinated databases and porting the numerical modeling codes into the Python programming language. This document provides a report of the code validation and verification testing.« less

49 CFR 236.903 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... electrical, mechanical, hardware, or software) that is part of a system or subsystem. Configuration..., including the hardware components and software version, is documented and maintained through the life-cycle... or compensates individuals to perform the duties specified in § 236.921 (a). Executive software means...

49 CFR 236.903 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... electrical, mechanical, hardware, or software) that is part of a system or subsystem. Configuration..., including the hardware components and software version, is documented and maintained through the life-cycle... or compensates individuals to perform the duties specified in § 236.921 (a). Executive software means...

49 CFR 236.903 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... electrical, mechanical, hardware, or software) that is part of a system or subsystem. Configuration..., including the hardware components and software version, is documented and maintained through the life-cycle... or compensates individuals to perform the duties specified in § 236.921 (a). Executive software means...

49 CFR 236.903 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... electrical, mechanical, hardware, or software) that is part of a system or subsystem. Configuration..., including the hardware components and software version, is documented and maintained through the life-cycle... or compensates individuals to perform the duties specified in § 236.921 (a). Executive software means...

Integrated Farm System Model Version 4.3 and Dairy Gas Emissions Model Version 3.3 Software development and distribution

USDA-ARS?s Scientific Manuscript database

Modeling routines of the Integrated Farm System Model (IFSM version 4.2) and Dairy Gas Emission Model (DairyGEM version 3.2), two whole-farm simulation models developed and maintained by USDA-ARS, were revised with new components for: (1) simulation of ammonia (NH3) and greenhouse gas emissions gene...

Evaluation of psychometric properties of the German Hospital Survey on Patient Safety Culture and its potential for cross-cultural comparisons: a cross-sectional study.

PubMed

Gambashidze, Nikoloz; Hammer, Antje; Brösterhaus, Mareen; Manser, Tanja

2017-11-09

To study the psychometric characteristics of German version of the Hospital Survey on Patient Safety Culture and to compare its dimensionality to other language versions in order to understand the instrument's potential for cross-national studies. Cross-sectional multicentre study to establish psychometric properties of German version of the survey instrument. 73 units from 37 departments of two German university hospitals. Clinical personnel (n=995 responses, response rate 39.6%). Psychometric properties (eg, model fit, internal consistency, construct validity) of the instrument and comparison of dimensionality across different language translations. The instrument demonstrated acceptable to good internal consistency (Cronbach's alpha 0.64-0.88). Confirmatory factor analysis of the original 12-factor model resulted in marginally satisfactory model fit (root mean square error of approximation (RMSEA)=0.05; standardised root mean residual (SRMR)=0.05; comparative fit index (CFI)=0.90; goodness of fit index (GFI)=0.88; Tucker-Lewis Index (TLI)=0.88). Exploratory factor analysis resulted in an alternative eight-factor model with good model fit (RMSEA=0.05; SRMR=0.05; CFI=0.95; GFI=0.91; TLI=0.94) and good internal consistency (Cronbach's alpha 0.73-0.87) and construct validity. Analysis of the dimensionality compared with models from 10 other language versions revealed eight dimensions with relatively stable composition and appearance across different versions and four dimensions requiring further improvement. The German version of Hospital Survey on Patient Safety Culture demonstrated satisfactory psychometric properties for use in German hospitals. However, our comparison of instrument dimensionality across different language versions indicates limitations concerning cross-national studies. Results of this study can be considered in interpreting findings across national contexts, in further refinement of the instrument for cross-national studies and in better understanding the various facets and dimensions of patient safety culture. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

ICESat (GLAS) Science Processing Software Document Series. Volume 2; Science Data Management Plan; 4.0

NASA Technical Reports Server (NTRS)

Jester, Peggy L.; Hancock, David W., III

1999-01-01

This document provides the Data Management Plan for the GLAS Standard Data Software (SDS) supporting the GLAS instrument of the EOS ICESat Spacecraft. The SDS encompasses the ICESat Science Investigator-led Processing System (I-SIPS) Software and the Instrument Support Facility (ISF) Software. This Plan addresses the identification, authority, and description of the interface nodes associated with the GLAS Standard Data Products and the GLAS Ancillary Data.

Revision of FMM-Yukawa: An adaptive fast multipole method for screened Coulomb interactions

NASA Astrophysics Data System (ADS)

Zhang, Bo; Huang, Jingfang; Pitsianis, Nikos P.; Sun, Xiaobai

2010-12-01

FMM-YUKAWA is a mathematical software package primarily for rapid evaluation of the screened Coulomb interactions of N particles in three dimensional space. Since its release, we have revised and re-organized the data structure, software architecture, and user interface, for the purpose of enabling more flexible, broader and easier use of the package. The package and its documentation are available at http://www.fastmultipole.org/, along with a few other closely related mathematical software packages. New version program summaryProgram title: FMM-Yukawa Catalogue identifier: AEEQ_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEEQ_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU GPL 2.0 No. of lines in distributed program, including test data, etc.: 78 704 No. of bytes in distributed program, including test data, etc.: 854 265 Distribution format: tar.gz Programming language: FORTRAN 77, FORTRAN 90, and C. Requires gcc and gfortran version 4.4.3 or later Computer: All Operating system: Any Classification: 4.8, 4.12 Catalogue identifier of previous version: AEEQ_v1_0 Journal reference of previous version: Comput. Phys. Comm. 180 (2009) 2331 Does the new version supersede the previous version?: Yes Nature of problem: To evaluate the screened Coulomb potential and force field of N charged particles, and to evaluate a convolution type integral where the Green's function is the fundamental solution of the modified Helmholtz equation. Solution method: The new version of fast multipole method (FMM) that diagonalizes the multipole-to-local translation operator is applied with the tree structure adaptive to sample particle locations. Reasons for new version: To handle much larger particle ensembles, to enable the iterative use of the subroutines in a solver, and to remove potential contention in assignments for parallelization. Summary of revisions: The software package FMM-Yukawa has been revised and re-organized in data structure, software architecture, programming methods, and user interface. The revision enables more flexible use of the package and economic use of memory resources. It consists of five stages. The initial stage (stage 1) determines, based on the accuracy requirement and FMM theory, the length of multipole expansions and the number of quadrature points for diagonalization, and loads the quadrature nodes and weights that are computed off line. Stage 2 constructs the oct-tree and interaction lists, with adaptation to the sparsity or density of particles and employing a dynamic memory allocation scheme at every tree level. Stage 3 executes the core FMM subroutine for numerical calculation of the particle interactions. The subroutine can now be used iteratively as in a solver, while the particle locations remain the same. Stage 4 releases the memory allocated in Stage 2 for the adaptive tree and interaction lists. The user can modify the iterative routine easily. When the particle locations are changed such as in a molecular dynamics simulation, stage 2 to 4 can also be used together repeatedly. The final stage releases the memory space used for the quadrature and other remaining FMM parameters. Programs at the stage level and at the user interface are re-written in the C programming language, while most of the translation and interaction operations remain in FORTRAN. As a result of the change in data structures and memory allocation, the revised package can accommodate much larger particle ensembles while maintaining the same accuracy-efficiency performance. The new version is also developed as an important precursor to its parallel counterpart on multi-core or many core processors in a shared memory programming environment. Particularly, in order to ensure mutual exclusion in concurrent updates without incurring extra latency, we have replaced all the assignment statements at a source box that put its data to multiple target boxes with assignments at every target box that gather data from source boxes. This amounts to replacing the column version of matrix-vector multiplication with the row version. The matrix here, however, is in compressive representation. Sufficient care is taken in the revision not to alter the algorithmic complexity or numerical behavior, as concurrent writing potentially takes place in the upward calculation of the multipole expansion coefficients, interactions at every level of the FMM tree, and downward calculation of the local expansion coefficients. The software modules and their compositions are also organized according to the stages they are used. Demonstration files and makefiles for merging the user routines and the library routines are provided. Restrictions: Accuracy requirement is described in terms of three or six digits. Higher multiples of three digits will be allowed in a later version. Finer decimation in digits for accuracy specification may or may not be necessary. Unusual features: Ready and friendly for customized use and instrumental in expression of concurrency and dependency for efficient parallelization. Running time: The running time depends linearly on the number N of particles, and varies with the distribution characteristics of the particle distribution. It also depends on the accuracy requirement, a higher accuracy requirement takes relatively longer time. The code outperforms the direct summation method when N⩾750.

Health Service Quality Scale: Brazilian Portuguese translation, reliability and validity.

PubMed

Rocha, Luiz Roberto Martins; Veiga, Daniela Francescato; e Oliveira, Paulo Rocha; Song, Elaine Horibe; Ferreira, Lydia Masako

2013-01-17

The Health Service Quality Scale is a multidimensional hierarchical scale that is based on interdisciplinary approach. This instrument was specifically created for measuring health service quality based on marketing and health care concepts. The aim of this study was to translate and culturally adapt the Health Service Quality Scale into Brazilian Portuguese and to assess the validity and reliability of the Brazilian Portuguese version of the instrument. We conducted a cross-sectional, observational study, with public health system patients in a Brazilian university hospital. Validity was assessed using Pearson's correlation coefficient to measure the strength of the association between the Brazilian Portuguese version of the instrument and the SERVQUAL scale. Internal consistency was evaluated using Cronbach's alpha coefficient; the intraclass (ICC) and Pearson's correlation coefficients were used for test-retest reliability. One hundred and sixteen consecutive postoperative patients completed the questionnaire. Pearson's correlation coefficient for validity was 0.20. Cronbach's alpha for the first and second administrations of the final version of the instrument were 0.982 and 0.986, respectively. For test-retest reliability, Pearson's correlation coefficient was 0.89 and ICC was 0.90. The culturally adapted, Brazilian Portuguese version of the Health Service Quality Scale is a valid and reliable instrument to measure health service quality.

Helmet-Mounted Display Of Clouds Of Harmful Gases

NASA Technical Reports Server (NTRS)

Diner, Daniel B.; Barengoltz, Jack B.; Schober, Wayne R.

1995-01-01

Proposed helmet-mounted opto-electronic instrument provides real-time stereoscopic views of clouds of otherwise invisible toxic, explosive, and/or corrosive gas. Display semitransparent: images of clouds superimposed on scene ordinarily visible to wearer. Images give indications on sizes and concentrations of gas clouds and their locations in relation to other objects in scene. Instruments serve as safety devices for astronauts, emergency response crews, fire fighters, people cleaning up chemical spills, or anyone working near invisible hazardous gases. Similar instruments used as sensors in automated emergency response systems that activate safety equipment and emergency procedures. Both helmet-mounted and automated-sensor versions used at industrial sites, chemical plants, or anywhere dangerous and invisible or difficult-to-see gases present. In addition to helmet-mounted and automated-sensor versions, there could be hand-held version. In some industrial applications, desirable to mount instruments and use them similarly to parking-lot surveillance cameras.

A Descriptive Evaluation of Automated Software Cost-Estimation Models,

DTIC Science & Technology

1986-10-01

Version 1.03D) * PCOC (Version 7.01) - PRICE S • SLIM (Version 1.1) • SoftCost (Version 5. 1) * SPQR /20 (Version 1. 1) - WICOMO (Version 1.3) These...produce detailed GANTT and PERT charts. SPQR /20 is based on a cost model developed at ITT. In addition to cost, schedule, and staffing estimates, it...cases and test runs required, and the effectiveness of pre-test and test activities. SPQR /20 also predicts enhancement and maintenance activities. C

Web-Based Mapping Puts the World at Your Fingertips

NASA Technical Reports Server (NTRS)

2008-01-01

NASA's award-winning Earth Resources Laboratory Applications Software (ELAS) package was developed at Stennis Space Center. Since 1978, ELAS has been used worldwide for processing satellite and airborne sensor imagery data of the Earth's surface into readable and usable information. DATASTAR Inc., of Picayune, Mississippi, has used ELAS software in the DATASTAR Image Processing Exploitation (DIPEx) desktop and Internet image processing, analysis, and manipulation software. The new DIPEx Version III includes significant upgrades and improvements compared to its esteemed predecessor. A true World Wide Web application, this product evolved with worldwide geospatial dimensionality and numerous other improvements that seamlessly support the World Wide Web version.

A theoretical basis for the analysis of multiversion software subject to coincident errors

NASA Technical Reports Server (NTRS)

Eckhardt, D. E., Jr.; Lee, L. D.

1985-01-01

Fundamental to the development of redundant software techniques (known as fault-tolerant software) is an understanding of the impact of multiple joint occurrences of errors, referred to here as coincident errors. A theoretical basis for the study of redundant software is developed which: (1) provides a probabilistic framework for empirically evaluating the effectiveness of a general multiversion strategy when component versions are subject to coincident errors, and (2) permits an analytical study of the effects of these errors. An intensity function, called the intensity of coincident errors, has a central role in this analysis. This function describes the propensity of programmers to introduce design faults in such a way that software components fail together when executing in the application environment. A condition under which a multiversion system is a better strategy than relying on a single version is given.

Virtual Instrument Simulator for CERES

NASA Technical Reports Server (NTRS)

Chapman, John J.

1997-01-01

A benchtop virtual instrument simulator for CERES (Clouds and the Earth's Radiant Energy System) has been built at NASA, Langley Research Center in Hampton, VA. The CERES instruments will fly on several earth orbiting platforms notably NASDA's Tropical Rainfall Measurement Mission (TRMM) and NASA's Earth Observing System (EOS) satellites. CERES measures top of the atmosphere radiative fluxes using microprocessor controlled scanning radiometers. The CERES Virtual Instrument Simulator consists of electronic circuitry identical to the flight unit's twin microprocessors and telemetry interface to the supporting spacecraft electronics and two personal computers (PC) connected to the I/O ports that control azimuth and elevation gimbals. Software consists of the unmodified TRW developed Flight Code and Ground Support Software which serves as the instrument monitor and NASA/TRW developed engineering models of the scanners. The CERES Instrument Simulator will serve as a testbed for testing of custom instrument commands intended to solve in-flight anomalies of the instruments which could arise during the CERES mission. One of the supporting computers supports the telemetry display which monitors the simulator microprocessors during the development and testing of custom instrument commands. The CERES engineering development software models have been modified to provide a virtual instrument running on a second supporting computer linked in real time to the instrument flight microprocessor control ports. The CERES Instrument Simulator will be used to verify memory uploads by the CERES Flight Operations TEAM at NASA. Plots of the virtual scanner models match the actual instrument scan plots. A high speed logic analyzer has been used to track the performance of the flight microprocessor. The concept of using an identical but non-flight qualified microprocessor and electronics ensemble linked to a virtual instrument with identical system software affords a relatively inexpensive simulation system capable of high fidelity.

OASIS: a data and software distribution service for Open Science Grid

NASA Astrophysics Data System (ADS)

Bockelman, B.; Caballero Bejar, J.; De Stefano, J.; Hover, J.; Quick, R.; Teige, S.

2014-06-01

The Open Science Grid encourages the concept of software portability: a user's scientific application should be able to run at as many sites as possible. It is necessary to provide a mechanism for OSG Virtual Organizations to install software at sites. Since its initial release, the OSG Compute Element has provided an application software installation directory to Virtual Organizations, where they can create their own sub-directory, install software into that sub-directory, and have the directory shared on the worker nodes at that site. The current model has shortcomings with regard to permissions, policies, versioning, and the lack of a unified, collective procedure or toolset for deploying software across all sites. Therefore, a new mechanism for data and software distributing is desirable. The architecture for the OSG Application Software Installation Service (OASIS) is a server-client model: the software and data are installed only once in a single place, and are automatically distributed to all client sites simultaneously. Central file distribution offers other advantages, including server-side authentication and authorization, activity records, quota management, data validation and inspection, and well-defined versioning and deletion policies. The architecture, as well as a complete analysis of the current implementation, will be described in this paper.

Flowing Valued Information and Cyber-Physical Situational Awareness

DTIC Science & Technology

2012-01-01

file type” constraints. The basic software supporting encryption and signing uses the OPENSSL software suite (the November 2009 version is...authorities for each organization can use OPENSSL software to generate their public and private keys. The MBTC does need to know the public or private

AutoGen Version 5.0

NASA Technical Reports Server (NTRS)

Gladden, Roy E.; Khanampornpan, Teerapat; Fisher, Forest W.

2010-01-01

Version 5.0 of the AutoGen software has been released. Previous versions, variously denoted Autogen and autogen, were reported in two articles: Automated Sequence Generation Process and Software (NPO-30746), Software Tech Briefs (Special Supplement to NASA Tech Briefs), September 2007, page 30, and Autogen Version 2.0 (NPO- 41501), NASA Tech Briefs, Vol. 31, No. 10 (October 2007), page 58. To recapitulate: AutoGen (now signifying automatic sequence generation ) automates the generation of sequences of commands in a standard format for uplink to spacecraft. AutoGen requires fewer workers than are needed for older manual sequence-generation processes, and greatly reduces sequence-generation times. The sequences are embodied in spacecraft activity sequence files (SASFs). AutoGen automates generation of SASFs by use of another previously reported program called APGEN. AutoGen encodes knowledge of different mission phases and of how the resultant commands must differ among the phases. AutoGen also provides means for customizing sequences through use of configuration files. The approach followed in developing AutoGen has involved encoding the behaviors of a system into a model and encoding algorithms for context-sensitive customizations of the modeled behaviors. This version of AutoGen addressed the MRO (Mars Reconnaissance Orbiter) primary science phase (PSP) mission phase. On previous Mars missions this phase has more commonly been referred to as mapping phase. This version addressed the unique aspects of sequencing orbital operations and specifically the mission specific adaptation of orbital operations for MRO. This version also includes capabilities for MRO s role in Mars relay support for UHF relay communications with the MER rovers and the Phoenix lander.

A Case Study in Flight Computer Software Redesign

NASA Astrophysics Data System (ADS)

Shimoni, R.; Ben-Zur, Y.

2004-06-01

Historically many real-time systems were developed using technologies that are now obsolete. There is a need for upgrading these systems. A good development process is essential to achieve a well-designed software product. We, at MLM, a subsidary of Israel Aircraft Industries, faced a similar situation in the Flight Mission Computer (Main Airborne Computer-MAC) of the SHAVIT launcher. It was necessary to upgrade the computer hardware and we decided to update the software as well. During the last two years, we have designed and implemented and new version of the MAC software, to be run on a new and stronger target platform. We undertook to create a new version of the MAC program using modern software development techniques. The process included Object-Oriented design using a CASE tool suitable for embedded real-time systems. We have partially implemented the ROPES development process. In this article we present the difficulties and challenges we faced in the software development process.

Land surface temperature measurements from EOS MODIS data

NASA Technical Reports Server (NTRS)

Wan, Zhengming

1995-01-01

A significant progress has been made in TIR instrumentation which is required to establish the spectral BRDF/emissivity knowledge base of land-surface materials and to validate the land-surface temperature (LST) algorithms. The SIBRE (spectral Infrared Bidirectional Reflectance and Emissivity) system and a TIR system for measuring spectral directional-hemispherical emissivity have been completed and tested successfully. Optical properties and performance features of key components (including spectrometer, and TIR source) of these systems have been characterized by integrated use of local standards (blackbody and reference plates). The stabilization of the spectrometer performance was improved by a custom designed and built liquid cooling system. Methods and procedures for measuring spectral TIR BRDF and directional-hemispheric emissivity with these two systems have been verified in sample measurements. These TIR instruments have been used in the laboratory and the field, giving very promising results. The measured spectral emissivities of water surface are very close to the calculated values based on well established water refractive index values in published papers. Preliminary results show that the TIR instruments can be used for validation of the MODIS LST algorithm in homogeneous test sites. The beta-3 version of the MODIS LST software is being prepared for its delivery scheduled in the early second half of this year.

A Preliminary Language Validity Analysis of the Problem Oriented Screening Instrument for Teenagers (POSIT).

ERIC Educational Resources Information Center

Mason, Michael J.

1995-01-01

The Problem Oriented Screening Inventory for Teenagers (POSIT) was analyzed in a Hispanic majority school district to determine the test/retest correlation of the English and Spanish versions of the instrument. Data analysis indicated fairly weak agreement between the English and Spanish POSIT version results for this sample of bilingual…

Development of a 12-item short version of the HIV stigma scale.

PubMed

Reinius, Maria; Wettergren, Lena; Wiklander, Maria; Svedhem, Veronica; Ekström, Anna Mia; Eriksson, Lars E

2017-05-30

Valid and reliable instruments for the measurement of enacted, anticipated and internalised stigma in people living with HIV are crucial for mapping trends in the prevalence of HIV-related stigma and tracking the effectiveness of stigma-reducing interventions. Although longer instruments exist, e.g., the commonly used 40-item HIV Stigma Scale by Berger et al., a shorter instrument would be preferable to facilitate the inclusion of HIV stigma in more and broader surveys. Therefore, the aim of this work was to develop a substantially shorter, but still valid, version of the HIV Stigma Scale. Data from a psychometric evaluation of the Swedish 40-item HIV Stigma Scale were reanalysed to create a short version with 12 items (three from each of the four stigma subscales: personalised stigma, disclosure concerns, concerns with public attitudes and negative self-image). The short version of the HIV stigma scale was then psychometrically tested using data from a national survey investigating stigma and quality of life among people living with HIV in Sweden (n = 880, mean age 47.9 years, 26% female). The hypothesized factor structure of the proposed short version was replicated in exploratory factor analysis without cross loadings and confirmatory factor analysis supported construct validity with high standardised effects (>0.7) of items on the intended scales. The χ 2 test was statistically significant (χ 2  = 154.2, df = 48, p < 0.001), but alternate fit measures indicated acceptable fit (comparative fit index: 0.963, Tucker-Lewis index: 0.950 and root mean square error of approximation: 0.071). Corrected item-total correlation coefficients were >0.4 for all items, with a variation indicating that the broadness of the concept of stigma had been captured. All but two aspects of HIV-related stigma that the instrument is intended to cover were captured by the selected items in the short version. The aspects that did not lose any items were judged to have acceptable psychometric properties. The short version of the instrument showed higher floor and ceiling effects than the full-length scale, indicating a loss of sensitivity in the short version. Cronbach's α for the subscales were all >0.7. Although being less sensitive in measurement, the proposed 12-item short version of the HIV Stigma Scale has comparable psychometric properties to the full-length scale and may be used when a shorter instrument is needed.

Distributed Visualization Project

NASA Technical Reports Server (NTRS)

Craig, Douglas; Conroy, Michael; Kickbusch, Tracey; Mazone, Rebecca

2016-01-01

Distributed Visualization allows anyone, anywhere to see any simulation at any time. Development focuses on algorithms, software, data formats, data systems and processes to enable sharing simulation-based information across temporal and spatial boundaries without requiring stakeholders to possess highly-specialized and very expensive display systems. It also introduces abstraction between the native and shared data, which allows teams to share results without giving away proprietary or sensitive data. The initial implementation of this capability is the Distributed Observer Network (DON) version 3.1. DON 3.1 is available for public release in the NASA Software Store (https://software.nasa.gov/software/KSC-13775) and works with version 3.0 of the Model Process Control specification (an XML Simulation Data Representation and Communication Language) to display complex graphical information and associated Meta-Data.

Using UML Modeling to Facilitate Three-Tier Architecture Projects in Software Engineering Courses

ERIC Educational Resources Information Center

Mitra, Sandeep

2014-01-01

This article presents the use of a model-centric approach to facilitate software development projects conforming to the three-tier architecture in undergraduate software engineering courses. Many instructors intend that such projects create software applications for use by real-world customers. While it is important that the first version of these…

Automatic Generation of Just-in-Time Online Assessments from Software Design Models

ERIC Educational Resources Information Center

Zualkernan, Imran A.; El-Naaj, Salim Abou; Papadopoulos, Maria; Al-Amoudi, Budoor K.; Matthews, Charles E.

2009-01-01

Computer software is pervasive in today's society. The rate at which new versions of computer software products are released is phenomenal when compared to the release rate of new products in traditional industries such as aircraft building. This rapid rate of change can partially explain why most certifications in the software industry are…

Preliminary design of the HARMONI science software

NASA Astrophysics Data System (ADS)

Piqueras, Laure; Jarno, Aurelien; Pécontal-Rousset, Arlette; Loupias, Magali; Richard, Johan; Schwartz, Noah; Fusco, Thierry; Sauvage, Jean-François; Neichel, Benoît; Correia, Carlos M.

2016-08-01

This paper introduces the science software of HARMONI. The Instrument Numerical Model simulates the instrument from the optical point of view and provides synthetic exposures simulating detector readouts from data-cubes containing astrophysical scenes. The Data Reduction Software converts raw-data frames into a fully calibrated, scientifically usable data cube. We present the functionalities and the preliminary design of this software, describe some of the methods and algorithms used and highlight the challenges that we will have to face.

The Open AUC Project.

PubMed

Cölfen, Helmut; Laue, Thomas M; Wohlleben, Wendel; Schilling, Kristian; Karabudak, Engin; Langhorst, Bradley W; Brookes, Emre; Dubbs, Bruce; Zollars, Dan; Rocco, Mattia; Demeler, Borries

2010-02-01

Progress in analytical ultracentrifugation (AUC) has been hindered by obstructions to hardware innovation and by software incompatibility. In this paper, we announce and outline the Open AUC Project. The goals of the Open AUC Project are to stimulate AUC innovation by improving instrumentation, detectors, acquisition and analysis software, and collaborative tools. These improvements are needed for the next generation of AUC-based research. The Open AUC Project combines on-going work from several different groups. A new base instrument is described, one that is designed from the ground up to be an analytical ultracentrifuge. This machine offers an open architecture, hardware standards, and application programming interfaces for detector developers. All software will use the GNU Public License to assure that intellectual property is available in open source format. The Open AUC strategy facilitates collaborations, encourages sharing, and eliminates the chronic impediments that have plagued AUC innovation for the last 20 years. This ultracentrifuge will be equipped with multiple and interchangeable optical tracks so that state-of-the-art electronics and improved detectors will be available for a variety of optical systems. The instrument will be complemented by a new rotor, enhanced data acquisition and analysis software, as well as collaboration software. Described here are the instrument, the modular software components, and a standardized database that will encourage and ease integration of data analysis and interpretation software.

Perme Intensive Care Unit Mobility Score and ICU Mobility Scale: translation into Portuguese and cross-cultural adaptation for use in Brazil

PubMed Central

Kawaguchi, Yurika Maria Fogaça; Nawa, Ricardo Kenji; Figueiredo, Thais Borgheti; Martins, Lourdes; Pires-Neto, Ruy Camargo

2016-01-01

ABSTRACT Objective: To translate the Perme Intensive Care Unit Mobility Score and the ICU Mobility Scale (IMS) into Portuguese, creating versions that are cross-culturally adapted for use in Brazil, and to determine the interobserver agreement and reliability for both versions. Methods: The processes of translation and cross-cultural validation consisted in the following: preparation, translation, reconciliation, synthesis, back-translation, review, approval, and pre-test. The Portuguese-language versions of both instruments were then used by two researchers to evaluate critically ill ICU patients. Weighted kappa statistics and Bland-Altman plots were used in order to verify interobserver agreement for the two instruments. In each of the domains of the instruments, interobserver reliability was evaluated with Cronbach's alpha coefficient. The correlation between the instruments was assessed by Spearman's correlation test. Results: The study sample comprised 103 patients-56 (54%) of whom were male-with a mean age of 52 ± 18 years. The main reason for ICU admission (in 44%) was respiratory failure. Both instruments showed excellent interobserver agreement (κ > 0.90) and reliability (α > 0.90) in all domains. Interobserver bias was low for the IMS and the Perme Score (−0.048 ± 0.350 and −0.06 ± 0.73, respectively). The 95% CIs for the same instruments ranged from −0.73 to 0.64 and −1.50 to 1.36, respectively. There was also a strong positive correlation between the two instruments (r = 0.941; p < 0.001). Conclusions: In their versions adapted for use in Brazil, both instruments showed high interobserver agreement and reliability. PMID:28117473

Incident Involving 30-Ah Li-ion Cell at NASA Glenn Research Center

NASA Technical Reports Server (NTRS)

Bennett, William

2006-01-01

The key lesson learned from the February 17, 2006 cell explosion incident is that PC-based test-systems, even those having built-in watchdog monitors, can lose control and malfunction. In the case of lithiumion cell/battery testing, the stored energy can be released explosively causing considerable injury and damage to facilities. The investigation showed that although the Arbin system has a built-in watchdog monitor, the circumstances of the incident defeated the action of the watchdog and allowed the cycler to continue operation without control. An upgrade to the most recent version of Arbin software (version 4) was provided as a fix to the presumed control problem. This upgrade included newer EPROM s for the cycler microprocessor. Investigation revealed that similar incidents have occurred at other NASA centers with a variety of PC-based test instruments. JPL suffered an incident with Maccor testers and the GRC fuel cell group observed similar problems with LabView software. This is not exclusively an Arbin problem, but an issue with all PC-based systems. In this incident, it was fortunate that the event occurred after-hours with no-one in the room. The facility arrangement placed control consoles adjacent to the test chamber doors. Had someone been in the room during the event, they would have been exposed to hot debris and toxic combustion products. It was also fortunate that the exploded cell stayed inside the chamber after the door was forced open. If the cell had been ejected into the room it could have caused serious facility damage by impact and possibly caused a fire in the facility.

A 40 Year Time Series of SBUV Observations: the Version 8.6 Processing

NASA Technical Reports Server (NTRS)

McPeters, Richard; Bhartia, P. K.; Flynn, L.

2012-01-01

Under a NASA program to produce long term data records from instruments on multiple satellites (MEaSUREs), data from a series of eight SBUV and SBUV 12 instruments have been reprocessed to create a 40 year long ozone time series. Data from the Nimbus 4 BUV, Nimbus 7 SBUV, and SBUV/2 instruments on NOAA 9, 11, 14, 16, 17, and 18 were used covering the period 1970 to 1972 and 1979 to the present. In past analyses an ozone time series was created from these instruments by adjusting ozone itself, instrument by instrument, for consistency during overlap periods. In the version 8.6 processing adjustments were made to the radiance calibration of each instrument to maintain a consistent calibration over the entire time series. Data for all eight instruments were then reprocessed using the adjusted radiances. Reprocessing is necessary to produce an accurate latitude dependence. Other improvements incorporated in version 8.6 included the use of the ozone cross sections of Brion, Daumont, and Malicet, and the use of a cloud height climatology derived from Aura OMI measurements. The new cross sections have a more accurate temperature dependence than the cross sections previously used. The OMI-based cloud heights account for the penetration of UV into the upper layers of clouds. The consistency of the version 8.6 time series was evaluated by intra-instrument comparisons during overlap periods, comparisons with ground-based instruments, and comparisons with measurements made by instruments on other satellites such as SAGE II and UARS MLS. These comparisons show that for the instruments on NOAA 16, 17 and 18, the instrument calibrations were remarkably stable and consistent from instrument to instrument. The data record from the Nimbus 7 SBUV was also very stable, and SAGE and ground-based comparisons show that the' calibration was consistent with measurements made years laterby the NOAA 16 instrument. The calibrations of the SBUV/2 instruments on NOAA 9, 11, and 14 were more of a problem. The rapidly drifting orbits of these satellites resulted in relative time and altitude dependent differences that are significant. Despite these problems, total column ozone appears to be consistent to better than 1% over the entire time series, while the ozone vertical distribution is consistent to approximately 5%.

Psychometric Properties of the "Miranda Rights Comprehension Instruments" with a Juvenile Justice Sample

ERIC Educational Resources Information Center

Goldstein, Naomi E. Sevin; Romaine, Christina L. Riggs; Zelle, Heather; Kalbeitzer, Rachel; Mesiarik, Constance; Wolbransky, Melinda

2011-01-01

This article describes the psychometric properties of the "Miranda Rights Comprehension Instruments", the revised version of Grisso's "Miranda" instruments. The original instruments demonstrated good reliability and validity in a normative sample. The revised instruments updated the content of the original instruments and were…

Psychometric properties of the newly translated creole multidimensional scale of perceived social support (MSPSS) and perceived adequacy of resource scale (PARS) and the relationship between perceived social support and resources in Haitian mothers in the US.

PubMed

Hannan, Jean; Alce, Marise; Astros, Adrian

2016-02-09

Low income postpartum mothers with little to no social support have increased maternal and infant morbidity and mortality, especially those with limited English proficiency and limited accesses to resources. Haitians, a growing minority in the US are an understudied population excluded from most studies due to the lack of instruments in Creole. The most widely used instruments for measuring social support, the Multidimensional Scale of Perceived Social Support (MSPSS) and Perceived Adequacy of Resource Scale (PARS), are not available in Creole. Currently, there are no published studies on the psychometric properties of the MSPSS or the PARS in Creole. Data from Haitian mothers are needed to identify potential postpartum mothers and infants most at risk of developing adverse maternal and infant outcomes from a lack of social support and perceived resources. The purpose of this study is to test the psychometrics of the newly-translated Creole instruments of the MSPSS and PARS with a sample of bilingual (Creole/English) mothers. The MSPSS and PARS were translated and back translated from English to Creole. The adapted Creole versions of the instruments were tested using a convenience sample. A total of 85 Haitian mothers' completed both instruments in Creole and English 2 weeks apart. Internal consistency reliability and stability were strong for both the MSPSS and PARS (.91-.99). The two instruments had strong reliability and validity for the translated Creole versions and similar to the English versions. The MSPSS and PARS are a valid measure of perceived social support and resources. Psychometric findings suggest that the newly translated Creole versions are good representations of the English versions indicating the translation process was successful. The newly translated instruments available in Creole provide non-English speaking Haitian mothers the opportunity to participate in studies.

Multi-version software reliability through fault-avoidance and fault-tolerance

NASA Technical Reports Server (NTRS)

Vouk, Mladen A.; Mcallister, David F.

1989-01-01

A number of experimental and theoretical issues associated with the practical use of multi-version software to provide run-time tolerance to software faults were investigated. A specialized tool was developed and evaluated for measuring testing coverage for a variety of metrics. The tool was used to collect information on the relationships between software faults and coverage provided by the testing process as measured by different metrics (including data flow metrics). Considerable correlation was found between coverage provided by some higher metrics and the elimination of faults in the code. Back-to-back testing was continued as an efficient mechanism for removal of un-correlated faults, and common-cause faults of variable span. Software reliability estimation methods was also continued based on non-random sampling, and the relationship between software reliability and code coverage provided through testing. New fault tolerance models were formulated. Simulation studies of the Acceptance Voting and Multi-stage Voting algorithms were finished and it was found that these two schemes for software fault tolerance are superior in many respects to some commonly used schemes. Particularly encouraging are the safety properties of the Acceptance testing scheme.

BOINC: compute for science

Science.gov Websites

. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation.

Indoor Semi-volatile Organic Compounds (i-SVOC) Version 1.0

EPA Pesticide Factsheets

i-SVOC Version 1.0 is a general-purpose software application for dynamic modeling of the emission, transport, sorption, and distribution of semi-volatile organic compounds (SVOCs) in indoor environments.

RADS Version 4: An Efficient Way to Analyse the Multi-Mission Altimeter Database

NASA Astrophysics Data System (ADS)

Scharroo, Remko; Leuliette, Eric; Naeije, Marc; Martin-Puig, Cristina; Pires, Nelson

2016-08-01

The Radar Altimeter Database System (RADS) has grown to become a mature altimeter database. Over the last 18 years it is continuously being developed, first at Delft University of Technology, now also at the National Oceanic and Atmospheric Administration (NOAA) and the European Organisation for the Exploitation of Meteorological Satellites (EUMETSAT).RADS now serves as a fundamental Climate Data Record for sea level. Because of the multiple users involved in vetting the data and the regular updates to the database, RADS is one of the most accurate and complete databases of satellite altimeter data around.RADS version 4 is a major change from the previous version. While the database is compatible with both software versions, the new software provides new tools, allows easier expansion, and has a better and more standardised interface.

GEOSTATISTICS FOR WASTE MANAGEMENT: A USER'S MANUAL FOR THE GEOPACK (VERSION 1.0) GEOSTATISTICAL SOFTWARE SYSTEM

EPA Science Inventory

GEOPACK, a comprehensive user-friendly geostatistical software system, was developed to help in the analysis of spatially correlated data. The software system was developed to be used by scientists, engineers, regulators, etc., with little experience in geostatistical techniques...

Iowa Bridge Backwater Software : users manual IHRB TR-564, version 2.0, June 2010.

DOT National Transportation Integrated Search

2010-06-01

This manual describes how to use the Iowa Bridge Backwater software. It also documents the methods and equations used for the calculations. The main body describes how to use the software and the appendices cover technical aspects. : The Bridge Backw...

15 CFR Supplement No. 6 to Part 742 - Technical Questionnaire for Encryption Items

Code of Federal Regulations, 2012 CFR

2012-01-01

... software, provide the following information: (1) Description of all the symmetric and asymmetric encryption... third-party hardware or software encryption components (if any). Identify the manufacturers of the hardware or software components, including specific part numbers and version information as needed to...

15 CFR Supplement No. 6 to Part 742 - Technical Questionnaire for Encryption Items

Code of Federal Regulations, 2013 CFR

2013-01-01

... software, provide the following information: (1) Description of all the symmetric and asymmetric encryption... third-party hardware or software encryption components (if any). Identify the manufacturers of the hardware or software components, including specific part numbers and version information as needed to...

15 CFR Supplement No. 6 to Part 742 - Technical Questionnaire for Encryption Items

Code of Federal Regulations, 2014 CFR

2014-01-01

... software, provide the following information: (1) Description of all the symmetric and asymmetric encryption... third-party hardware or software encryption components (if any). Identify the manufacturers of the hardware or software components, including specific part numbers and version information as needed to...

Translation and cross-cultural adaptation of the Cardiff Wound Impact Schedule to Brazilian Portuguese.

PubMed

Augusto, Fabiana da Silva; Blanes, Leila; Nicodemo, Denise; Ferreira, Lydia Masako

2017-05-01

To translate into Brazilian Portuguese and cross-culturally adapt the Cardiff Wound Impact Schedule, a specific measure of health-related quality of life (HRQoL) for patients with chronic wounds. Chronic wounds have a relevant impact on the HRQoL of patients. However, there are few instruments cross-culturally adapted and validated in Brazil to assess HRQoL in patients with wounds. A descriptive cross-sectional study was conducted following six steps: (1) translation of the original instrument into Brazilian-Portuguese by two independent translators; (2) construction of a consensus version based on both translations; (3) two independent back-translations into English of the consensus version; (4) review by an expert committee and construction of the pre-final version; (5) testing of the pre-final version on patients with chronic wounds; and (6) construction of the final version. The psychometric properties of the instrument were tested on 30 patients with chronic wounds of the lower limb; 76.7% were men, 70.0% had traumatic wounds, and 43.3% had the wound for more than 1 year. Participants were recruited from an outpatient wound care clinic in São Paulo, Brazil. The final version approved by the expert committee was well understood by all patients who participate in the study and had satisfactory face validity, content validity, and internal consistency, with Cronbach's alpha coefficients ranging from 0.681 to 0.920. The cross-culturally adapted Brazilian-Portuguese version of the instrument showed satisfactory face and content validity, good internal consistency, and was named Cardiff Wound Impact Schedule-Federal University of São Paulo School of Medicine or CWIS-UNIFESP/EPM. Copyright © 2016 Tissue Viability Society. Published by Elsevier Ltd. All rights reserved.

Clinical Evaluation of Quality of Obturation and Instrumentation Time using Two Modified Rotary File Systems with Manual Instrumentation in Primary Teeth

PubMed Central

Govindaraju, Lavanya; Subramanian, EMG

2017-01-01

Introduction Pulp therapy in primary teeth has been performed using various instrumentation techniques. However, the conventional instrumentation technique used for root canal preparation in primary teeth is hand instrumentation. Various Nickel-Titanium (Ni-Ti) instruments are available to perform efficient root canal preparation in primary teeth. These Ni-Ti instruments has been designed to aid in better root canal preparation in permanent teeth but are rarely used in primary teeth. It is necessary to assess the feasibility of using these adult rotary files with a modified sequence in primary teeth. Aim To compare the quality of obturation and instrumentation time during root canal preparation using hand files and modified rotary file systems in primary molars. Materials and Methods Forty-five primary mandibular molars were randomly assigned to three experimental groups (n=15). Group I was instrumented using k-hand files, Group II with S2 ProTaper universal file and Group III with 0.25 tip 4% taper K3 rotary file. Standardized digital radiographs were taken before and after root canal instrumentation. Root canal preparation time was also recorded. Statistical analysis of the obtained data was done using SPSS Software version 17.0. An intergroup comparison of the instrumentation time and the quality of obturation was done using ANOVA and Chi-square test with the level of significance set at 0.05. Results No significant differences were noted with regard to the quality of obturation (p=0.791). However, a statistically significant difference was noted in the instrumentation time between the three groups (p<0.05). ProTaper rotary system had significantly lesser instrumentation time when compared to that of K3 rotary system and hand file system. Conclusion The hand files, S2 ProTaper Universal and K3 0.25 tip 4% taper files systems performed similarly with respect to the quality of obturation. There was a significant difference in instrumentation time with manual instrumentation compared to the modified rotary file systems in primary teeth. PMID:29207834

An Investigation Into the Differences in Bone Density and Body Composition Measurements Between 2 GE Lunar Densitometers and Their Comparison to a 4-Component Model.

PubMed

Watson, Laura P E; Venables, Michelle C; Murgatroyd, Peter R

We describe a study to assess the precision of the GE Lunar iDXA and the agreement between the iDXA and GE Lunar Prodigy densitometers for the measurement of regional- and total-body bone and body composition in normal to obese healthy adults. We compare the whole-body fat mass by dual-energy X-ray absorptiometry (DXA) to measurements by a 4-component (4-C) model. Sixty-nine participants, aged 37 ± 12 yr, with a body mass index of 26.2 ± 5.1 kg/cm 2 , were measured once on the Prodigy and twice on the iDXA. The 4-C model estimated fat mass from body mass, total body water by deuterium dilution, body volume by air displacement plethysmography, and bone mass by DXA. Agreements between measurements made on the 2 instruments and by the 4-C model were analyzed by Bland-Altman and linear regression analyses. Where appropriate, translational cross-calibration equations were derived. Differences between DXA software versions were investigated. iDXA precision was less than 2% of the measured value for all regional- and whole-body bone and body composition measurements with the exception of arm fat mass (2.28%). We found significant differences between iDXA and Prodigy (p < 0.05) whole-body and regional bone, fat mass (FM), and lean mass, with the exception of hip bone mass, area and density, and spine area. Compared to iDXA, Prodigy overestimated FM and underestimated lean mass. However, compared to 4-C, iDXA showed a smaller bias and narrower limits of agreement than Prodigy. No significant differences between software versions in FM estimations existed. Our results demonstrate excellent iDXA precision. However, significant differences exist between the 2 GE Lunar instruments, Prodigy and iDXA measurement values. A divergence from the reference 4-C observations remains in FM estimations made by DXA even following the recent advances in technology. Further studies are particularly warranted in individuals with large FM contents. Copyright © 2017. Published by Elsevier Inc.

FINDS: A fault inferring nonlinear detection system programmers manual, version 3.0

NASA Technical Reports Server (NTRS)

Lancraft, R. E.

1985-01-01

Detailed software documentation of the digital computer program FINDS (Fault Inferring Nonlinear Detection System) Version 3.0 is provided. FINDS is a highly modular and extensible computer program designed to monitor and detect sensor failures, while at the same time providing reliable state estimates. In this version of the program the FINDS methodology is used to detect, isolate, and compensate for failures in simulated avionics sensors used by the Advanced Transport Operating Systems (ATOPS) Transport System Research Vehicle (TSRV) in a Microwave Landing System (MLS) environment. It is intended that this report serve as a programmers guide to aid in the maintenance, modification, and revision of the FINDS software.

[An Introduction to A Newly-developed "Acupuncture Needle Manipulation Training-evaluation System" Based on Optical Motion Capture Technique].

PubMed

Zhang, Ao; Yan, Xing-Ke; Liu, An-Guo

2016-12-25

In the present paper, the authors introduce a newly-developed "Acupuncture Needle Manipulation Training-evaluation System" based on optical motion capture technique. It is composed of two parts, sensor and software, and overcomes some shortages of mechanical motion capture technique. This device is able to analyze the data of operations of the pressing-hand and needle-insertion hand during acupuncture performance and its software contains personal computer (PC) version, Android version, and Internetwork Operating System (IOS) Apple version. It is competent in recording and analyzing information of any ope-rator's needling manipulations, and is quite helpful for teachers in teaching, training and examining students in clinical practice.

Biological Science: An Ecological Approach. BSCS Green Version. Teacher's Edition. Sixth Edition.

ERIC Educational Resources Information Center

Biological Sciences Curriculum Study, Colorado Springs.

This book is the teacher's edition to the 1987 edition of the Biological Sciences Curriculum Study Green Version textbook. It contains directions for teaching with this version, a description of the accompanying materials, teaching strategies by chapters, lists of useful software, safety guidelines, a materials list, chemical safety information,…

Inter-rater reliability of the German version of the Nurses' Global Assessment of Suicide Risk scale.

PubMed

Kozel, Bernd; Grieser, Manuela; Abderhalden, Christoph; Cutcliffe, John R

2016-10-01

In comparison to the general population, the suicide rates of psychiatric inpatient populations in Germany and Switzerland are very high. An important preventive contribution to the lowering of the suicide rates in mental health care is to ensure that the risk of suicide of psychiatric inpatients is assessed as accurately as possible. While risk-assessment instruments can serve an important function in determining such risk, very few have been translated to German. Therefore, in the present study, we reported on the German version of Nurses' Global Assessment of Suicide Risk (NGASR) scale. After translating the original instrument into German and pretesting the German version, we tested the inter-rater reliability of the instrument. Twelve video case studies were evaluated by 13 raters with the NGASR scale in a 'laboratory' trial. In each case, the observer's agreement was calculated for the single items, the overall scale, the risk levels, and the sum scores. The statistical data analysis was conducted with kappa and AC1 statistics for dichotomous (items, scale) scales. A high-to-very high observers' agreement (AC1: 0.62-1.00, kappa: 0.00-1.00) was determined for 16 items of the German version of the NGASR scale. We conclude that the German version of the NGASR scale is a reliable instrument for evaluating risk factors for suicide. A reliable application in the clinical practise appears to be enhanced by training in the use of the instrument and the right implementation instructions. © 2016 Australian College of Mental Health Nurses Inc.

Software for the Hydra Instrument on the Polar Spacecraft

NASA Technical Reports Server (NTRS)

Fillius, Walker

1996-01-01

This software was developed by UCSD for the Hydra instrument and conforms with the contractural Statement of Work, with the exception, ordered by the NASA Technical Monitor, that the programming language was assembly language rather than Forth.

The Quebec Sleep Questionnaire on quality of life in patients with obstructive sleep apnea: translation into Portuguese and cross-cultural adaptation for use in Brazil.

PubMed

Melo, José Tavares de; Maurici, Rosemeri; Tavares, Michelle Gonçalves de Souza; Pizzichini, Marcia Margareth Menezes; Pizzichini, Emilio

2017-01-01

To translate the Quebec Sleep Questionnaire (QSQ), a specific instrument for the assessment of quality of life in patients with sleep obstructive apnea, into Portuguese and to create a version that is cross-culturally adapted for use in Brazil. The Portuguese-language version was developed according to a rigorous methodology, which included the following steps: preparation; translation from English into Portuguese in three versions; reconciliation to a single version; back-translation of that version into English; comparison and harmonization of the back-translation with the original version; review of the Portuguese-language version; cognitive debriefing; text review; and arrival at the final version. The Portuguese-language version of the QSQ for use in Brazil had a clarity score, as measured by cognitive debriefing, ranging from 0.81 to 0.99, demonstrating the consistency of translation and cross-cultural adaptation processes. The process of translating the QSQ into Portuguese and creating a version that is cross-culturally adapted for use in Brazil produced a valid instrument to assess the quality of life in patients with obstructive sleep apnea.

The Quebec Sleep Questionnaire on quality of life in patients with obstructive sleep apnea: translation into Portuguese and cross-cultural adaptation for use in Brazil

PubMed Central

de Melo, José Tavares; Maurici, Rosemeri; Tavares, Michelle Gonçalves de Souza; Pizzichini, Marcia Margareth Menezes; Pizzichini, Emilio

2017-01-01

ABSTRACT Objective: To translate the Quebec Sleep Questionnaire (QSQ), a specific instrument for the assessment of quality of life in patients with sleep obstructive apnea, into Portuguese and to create a version that is cross-culturally adapted for use in Brazil. Methods: The Portuguese-language version was developed according to a rigorous methodology, which included the following steps: preparation; translation from English into Portuguese in three versions; reconciliation to a single version; back-translation of that version into English; comparison and harmonization of the back-translation with the original version; review of the Portuguese-language version; cognitive debriefing; text review; and arrival at the final version. Results: The Portuguese-language version of the QSQ for use in Brazil had a clarity score, as measured by cognitive debriefing, ranging from 0.81 to 0.99, demonstrating the consistency of translation and cross-cultural adaptation processes. Conclusions: The process of translating the QSQ into Portuguese and creating a version that is cross-culturally adapted for use in Brazil produced a valid instrument to assess the quality of life in patients with obstructive sleep apnea. PMID:28767769

The Cultural Adaptation of the Youth Quality of Life Instrument-Research Version for Latino Children and Adolescents

ERIC Educational Resources Information Center

Chavez, Ligia M.; Matias-Carrelo, Leida; Barrio, Concepcion; Canino, Glorisa

2007-01-01

We reviewed the Spanish translation of the Youth Quality of Life Instrument-Research Version (YQOL-R) and culturally adapted the measure with Puerto Rican and Mexican American children and adolescents. The YQOL-R is a self-reported measure that includes four domains: Sense of Self, Social Relationships, Environment, and General Quality of Life. A…

A Path Analysis of Factors Influencing Racial Differences on the Massachusetts Youth Screening Instrument-Version 2

ERIC Educational Resources Information Center

McCoy, Henrika

2011-01-01

Thousands of juveniles with mental health disorders enter the juvenile justice system every year. The Massachusetts Youth Screening Instrument-Version 2 (MAYSI-2) is often used to assess them. The disproportionate numbers of African American youth in the juvenile justice system and the large numbers of youth with mental health needs necessitate…

COSMIC monthly progress report

NASA Technical Reports Server (NTRS)

1994-01-01

Activities of the Computer Software Management and Information Center (COSMIC) are summarized for the month of May 1994. Tables showing the current inventory of programs available from COSMIC are presented and program processing and evaluation activities are summarized. Nine articles were prepared for publication in the NASA Tech Brief Journal. These articles (included in this report) describe the following software items: (1) WFI - Windowing System for Test and Simulation; (2) HZETRN - A Free Space Radiation Transport and Shielding Program; (3) COMGEN-BEM - Composite Model Generation-Boundary Element Method; (4) IDDS - Interactive Data Display System; (5) CET93/PC - Chemical Equilibrium with Transport Properties, 1993; (6) SDVIC - Sub-pixel Digital Video Image Correlation; (7) TRASYS - Thermal Radiation Analyzer System (HP9000 Series 700/800 Version without NASADIG); (8) NASADIG - NASA Device Independent Graphics Library, Version 6.0 (VAX VMS Version); and (9) NASADIG - NASA Device Independent Graphics Library, Version 6.0 (UNIX Version). Activities in the areas of marketing, customer service, benefits identification, maintenance and support, and dissemination are also described along with a budget summary.

The Clinical Interview Schedule-Revised (CIS-R)-Malay Version, Clinical Validation.

PubMed

Subramaniam, Kavitha; Krishnaswamy, Saroja; Jemain, Abdul Aziz; Hamid, Abdul; Patel, Vikram

2006-01-01

Use of instruments or questionnaires in different cultural settings without proper validation can result in inaccurate results. Issues like reliability, validity, feasibility and acceptability should be considered in the use of an instrument. The study aims to determine the usefulness of the CIS-R Malay version in detecting common mental health problems specifically to establish the validity. The CIS-R instrument (PROQSY* format) was translated through the back translation process into Malay. Inter rater reliability was established for raters who were medical students. Cases and controls for the study were psychiatric in patients, out patient and relatives or friends accompanying the patients to the clinic or visiting the inpatients. The Malay version of CIS-R was administered to all cases and controls. All cases and controls involved in the study were rated by psychiatrists for psychiatric morbidity using the SCID as a guideline. Specificity and sensitivity of the CIS-R to the assessment by the psychiatrist were determined. The Malay version of CIS-R showed 100% sensitivity and 96.15% specificity at a cut off score of 9. The CIS-R can be a useful instrument for clinical and research use in the Malaysian population for diagnosing common mental disorders like depression and anxiety.

Teaching computer interfacing with virtual instruments in an object-oriented language.

PubMed Central

Gulotta, M

1995-01-01

LabVIEW is a graphic object-oriented computer language developed to facilitate hardware/software communication. LabVIEW is a complete computer language that can be used like Basic, FORTRAN, or C. In LabVIEW one creates virtual instruments that aesthetically look like real instruments but are controlled by sophisticated computer programs. There are several levels of data acquisition VIs that make it easy to control data flow, and many signal processing and analysis algorithms come with the software as premade VIs. In the classroom, the similarity between virtual and real instruments helps students understand how information is passed between the computer and attached instruments. The software may be used in the absence of hardware so that students can work at home as well as in the classroom. This article demonstrates how LabVIEW can be used to control data flow between computers and instruments, points out important features for signal processing and analysis, and shows how virtual instruments may be used in place of physical instrumentation. Applications of LabVIEW to the teaching laboratory are also discussed, and a plausible course outline is given. PMID:8580361

Teaching computer interfacing with virtual instruments in an object-oriented language.

PubMed

Gulotta, M

1995-11-01

LabVIEW is a graphic object-oriented computer language developed to facilitate hardware/software communication. LabVIEW is a complete computer language that can be used like Basic, FORTRAN, or C. In LabVIEW one creates virtual instruments that aesthetically look like real instruments but are controlled by sophisticated computer programs. There are several levels of data acquisition VIs that make it easy to control data flow, and many signal processing and analysis algorithms come with the software as premade VIs. In the classroom, the similarity between virtual and real instruments helps students understand how information is passed between the computer and attached instruments. The software may be used in the absence of hardware so that students can work at home as well as in the classroom. This article demonstrates how LabVIEW can be used to control data flow between computers and instruments, points out important features for signal processing and analysis, and shows how virtual instruments may be used in place of physical instrumentation. Applications of LabVIEW to the teaching laboratory are also discussed, and a plausible course outline is given.

GEOSTATISTICS FOR WASTE MANAGEMENT: A USER'S MANUEL FOR THE GEOPACK (VERSION 1.0) GEOSTATISTICAL SOFTWARE SYSTEM

EPA Science Inventory

A comprehensive, user-friendly geostatistical software system called GEOPACk has been developed. The purpose of this software is to make available the programs necessary to undertake a geostatistical analysis of spatially correlated data. The programs were written so that they ...

Fairbanks North Star borough rural roads upgrade inventory and cost estimation software user guide : version I.

DOT National Transportation Integrated Search

2013-04-01

The Rural Road Upgrade Inventory and Cost Estimation Software is designed by the AUTC : research team to help the Fairbanks North Star Borough (FNSB) estimate the cost of upgrading : rural roads located in the Borough's Service Areas. The Software pe...

Supporting Source Code Comprehension during Software Evolution and Maintenance

ERIC Educational Resources Information Center

Alhindawi, Nouh

2013-01-01

This dissertation addresses the problems of program comprehension to support the evolution of large-scale software systems. The research concerns how software engineers locate features and concepts along with categorizing changes within very large bodies of source code along with their versioned histories. More specifically, advanced Information…

The UCLA Design Diversity Experiment (DEDIX) system: A distributed testbed for multiple-version software

NASA Technical Reports Server (NTRS)

Avizienis, A.; Gunningberg, P.; Kelly, J. P. J.; Strigini, L.; Traverse, P. J.; Tso, K. S.; Voges, U.

1986-01-01

To establish a long-term research facility for experimental investigations of design diversity as a means of achieving fault-tolerant systems, a distributed testbed for multiple-version software was designed. It is part of a local network, which utilizes the Locus distributed operating system to operate a set of 20 VAX 11/750 computers. It is used in experiments to measure the efficacy of design diversity and to investigate reliability increases under large-scale, controlled experimental conditions.

Software Classifications: Trends in Literacy Software Publication and Marketing.

ERIC Educational Resources Information Center

Balajthy, Ernest

First in a continuing series of reports on trends in marketing and publication of software for literacy education, a study explored the development of a database to track the trends and reported on trends seen in 1995. The final version of the 1995 database consisted of 1011 software titles, 165 of which had been published in 1995 and 846…

ProUCL version 4.1.00 Documentation Downloads

EPA Pesticide Factsheets

ProUCL version 4.1.00 represents a comprehensive statistical software package equipped with statistical methods and graphical tools needed to address many environmental sampling and statistical issues as described in various these guidance documents.

Annotated bibliography of software engineering laboratory literature

NASA Technical Reports Server (NTRS)

Buhler, Melanie; Valett, Jon

1989-01-01

An annotated bibliography is presented of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. The bibliography was updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials were grouped into eight general subject areas for easy reference: (1) The Software Engineering Laboratory; (2) The Software Engineering Laboratory: Software Development Documents; (3) Software Tools; (4) Software Models; (5) Software Measurement; (6) Technology Evaluations; (7) Ada Technology; and (8) Data Collection. Subject and author indexes further classify these documents by specific topic and individual author.

Key Questions in Building Defect Prediction Models in Practice

NASA Astrophysics Data System (ADS)

Ramler, Rudolf; Wolfmaier, Klaus; Stauder, Erwin; Kossak, Felix; Natschläger, Thomas

The information about which modules of a future version of a software system are defect-prone is a valuable planning aid for quality managers and testers. Defect prediction promises to indicate these defect-prone modules. However, constructing effective defect prediction models in an industrial setting involves a number of key questions. In this paper we discuss ten key questions identified in context of establishing defect prediction in a large software development project. Seven consecutive versions of the software system have been used to construct and validate defect prediction models for system test planning. Furthermore, the paper presents initial empirical results from the studied project and, by this means, contributes answers to the identified questions.

Cross-cultural adaptation of the Spence children's anxiety scale in Malaysia.

PubMed

Ahmadi, Atefeh; Mustaffa, Mohamed Sharif; Haghdoost, AliAkbar; Khan, Aqeel; Latif, Adibah Abdul

2015-01-01

Anxiety among children has increased in recent years. Culturally adapted questionnaires developed to measure the level of anxiety are the best screening instruments for the general population. This study describes the scientific translation and adaptation of the Spence Children's Anxiety Scale (SCAS) into the Malay language. The process of scientific translation of this selfreport instrument followed the guidelines of the Task Force for Translation and Cultural Adaptation of the International Society for Pharmacoeconomics and Outcomes Research (ISPOR). The Malay version and its adaptation for a new cultural context are described. The Malay version achieved the aims of the original version and its conceptual and operational equivalence. It may be used as the first Malay instrument to measure anxiety among children in research and in clinical and community settings.

Psychometric characteristics of the Eating and Appraisal Due to Emotions and Stress Questionnaire and obesity in Mexican university students.

PubMed

Lazarevich, Irina; Irigoyen-Camacho, María Esther; Velazquez-Alva, María del Consuelo; Salinas-Ávila, Jaqueline

2015-06-01

Emotional eating has been defined as eating in a response to negative emotions and it is associated with weight gain. The English version of Eating Appraisal Due to Emotions and Stress Questionnaire (EADES) was developed to assess how individuals use food in order to cope with stress and emotions. To analyze psychometric characteristics of Spanish version of EADES and to identify whether the constructs of EADES were associated with obesity in university students. The EADES (Spanish version) was administered to 232 Mexican university students from 18 to 29 years old. Body Mass Index (BMI) was calculated. A test-retest evaluation was conducted with 75 participants. Cronbach's alpha of EADES was 0.92; the interclass correlation coefficient was 0.88. Regarding BMI and EADES results, the subscale Emotion and Stress Related Eating was significantly associated with obesity (p = 0.026). Through factor analysis of the instrument, three factors were extracted and items that showed factor loading < 0.40 were eliminated. 40 items remained in the questionnaire. With regard to obesity and the 40-items version of the instrument, a statistically significance association was found for the total score (OR = 0.973, p = 0.020) and for the factor Self-confidence related to Emotional Eating component (OR = 0.940, p = 0.026). A good internal consistency and temporal stability of the Spanish version of the instrument were found; the 40-item EADES version was positively associated with obesity. This instrument could be useful in assessing emotional eating. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Instrument control software requirement specification for Extremely Large Telescopes

NASA Astrophysics Data System (ADS)

Young, Peter J.; Kiekebusch, Mario J.; Chiozzi, Gianluca

2010-07-01

Engineers in several observatories are now designing the next generation of optical telescopes, the Extremely Large Telescopes (ELT). These are very complex machines that will host sophisticated astronomical instruments to be used for a wide range of scientific studies. In order to carry out scientific observations, a software infrastructure is required to orchestrate the control of the multiple subsystems and functions. This paper will focus on describing the considerations, strategies and main issues related to the definition and analysis of the software requirements for the ELT's Instrument Control System using modern development processes and modelling tools like SysML.

Control software and electronics architecture design in the framework of the E-ELT instrumentation

NASA Astrophysics Data System (ADS)

Di Marcantonio, P.; Coretti, I.; Cirami, R.; Comari, M.; Santin, P.; Pucillo, M.

2010-07-01

During the last years the European Southern Observatory (ESO), in collaboration with other European astronomical institutes, has started several feasibility studies for the E-ELT (European-Extremely Large Telescope) instrumentation and post-focal adaptive optics. The goal is to create a flexible suite of instruments to deal with the wide variety of scientific questions astronomers would like to see solved in the coming decades. In this framework INAF-Astronomical Observatory of Trieste (INAF-AOTs) is currently responsible of carrying out the analysis and the preliminary study of the architecture of the electronics and control software of three instruments: CODEX (control software and electronics) and OPTIMOS-EVE/OPTIMOS-DIORAMAS (control software). To cope with the increased complexity and new requirements for stability, precision, real-time latency and communications among sub-systems imposed by these instruments, new solutions have been investigated by our group. In this paper we present the proposed software and electronics architecture based on a distributed common framework centered on the Component/Container model that uses OPC Unified Architecture as a standard layer to communicate with COTS components of three different vendors. We describe three working prototypes that have been set-up in our laboratory and discuss their performances, integration complexity and ease of deployment.

AF-GEOSpace Version 2.1 Release

NASA Astrophysics Data System (ADS)

Hilmer, R. V.; Ginet, G. P.; Hall, T.; Holeman, E.; Madden, D.; Perry, K. L.; Tautz, M.; Roth, C.

2006-05-01

AF-GEOSpace Version 2.1 is a graphics-intensive software program with space environment models and applications developed recently by the Space Weather Center of Excellence at AFRL. A review of new and planned AF-GEOSpace capabilities will be given. The software addresses a wide range of physical domains and addresses such topics as solar disturbance propagation, geomagnetic field and radiation belt configurations, auroral particle precipitation, and ionospheric scintillation. Building on the success of previous releases, AF-GEOSpace has become a platform for the rapid prototyping of automated operational and simulation space weather visualization products and helps with a variety of tasks, including: orbit specification for radiation hazard avoidance; satellite design assessment and post-event anomaly analysis; solar disturbance effects forecasting; determination of link outage regions for active ionospheric conditions; satellite magnetic conjugate studies, scientific model validation and comparison, physics research, and education. Previously, Version 2.0 provided a simplified graphical user interface, improved science and application modules, significantly enhanced graphical performance, common input data archive sets, and 1-D, 2-D, and 3- D visualization tools for all models. Dynamic capabilities permit multiple environments to be generated at user- specified time intervals while animation tools enable the display of satellite orbits and environment data together as a function of time. Building on the Version 2.0 software architecture, AF-GEOSpace Version 2.1 includes a host of new modules providing, for example, plasma sheet charged particle fluxes, neutral atmosphere densities, 3-D cosmic ray cutoff maps, low-altitude trapped proton belt flux specification, DMSP particle data displays, satellite magnetic field footprint mapping determination, and meteor sky maps and shower/storm fluxes with spacecraft impact probabilities. AF-GEOSpace Version 2.1 was developed for Windows XP and Linux systems. To receive a copy of the AF-GEOSpace 2.1 software, please submit requests via e-mail to the first author.

The nuMOIRCS project: detector upgrade overview and early commissioning results

NASA Astrophysics Data System (ADS)

Walawender, Josh; Wung, Matthew; Fabricius, Maximilian; Tanaka, Ichi; Arimoto, Nobuo; Cook, David; Elms, Brian; Hashiba, Yasuhito; Hu, Yen-Sang; Iwata, Ikuru; Nishimura, Tetsuo; Omata, Koji; Takato, Naruhisa; Wang, Shiang-Yu; Weber, Mark

2016-08-01

In 2014 and 2015 the Multi-Object InfraRed Camera and Spectrograph (MOIRCS) instrument at the Subaru Telescope on Maunakea is underwent a significant modernization and upgrade project. We upgraded the two Hawaii2 detectors to Hawaii2-RG models, modernized the cryogenic temperature control system, and rewrote much of the instrument control software. The detector upgrade replaced the Hawaii2 detectors which use the Tohoku University Focal Plane Array Controller (TUFPAC) electronics with Hawaii2-RG detectors using SIDECAR ASIC (a fully integrated FPA controller system-on-a-chip) and a SAM interface card. We achieved an improvement in read noise by a factor of about 2 with this detector and electronics upgrade. The cryogenic temperature control upgrade focused on modernizing the components and making the procedures for warm up and cool down of the instrument safer. We have moved PID control loops out of the instrument control software and into Lakeshore model 336 cryogenic temperature controllers and have added interlocks on the warming systems to prevent overheating of the instrument. Much of the instrument control software has also been re-written. This was necessitated by the different interface to the detector electronics (ASIC and SAM vs. TUFPAC) and by the desire to modernize the interface to the telescope control software which has been updated to Subaru's "Gen2" system since the time of MOIRCS construction and first light. The new software is also designed to increase reliability of operation of the instrument, decrease overheads, and be easier for night time operators and support astronomers to use.

Cultural adaptation: translatability assessment and linguistic validation of the patient-reported outcome instrument for irritable bowel syndrome with diarrhea.

PubMed

Delgado-Herrera, Leticia; Lasch, Kathryn; Popielnicki, Ana; Nishida, Akito; Arbuckle, Rob; Banderas, Benjamin; Zentner, Susan; Gagainis, Ingrid; Zeiher, Bernhardt

2016-01-01

Following a 2009 US Food and Drug Administration guidance, a new patient-reported outcome (PRO) instrument was developed to support end points in multinational clinical trials assessing irritable bowel syndrome with diarrhea (IBS-D) symptom severity. Our objective was to assess the translatability of the IBS-D PRO instrument into ten languages, and subsequently perform a cultural adaptation/linguistic validation of the questionnaire into Japanese and US Spanish. Translatability assessments of the US English version of the IBS-D PRO were performed by experienced PRO translators who were native speakers of each target language and currently residing in target-language countries. Languages were Chinese (People's Republic of China), Dutch (the Netherlands), French (Belgium), German (Germany), Japanese (Japan), Polish (Poland), Portuguese (Brazil), Russian (Russia), Spanish (Mexico), and Spanish (US). The project team assessed the instrument to identify potential linguistic and/or cultural adaptation issues. After the issues identified were resolved, the instrument was translated into Spanish (US) and Japanese through a process of two forward translations, one reconciled translation, and one backward translation. The project team reviewed the translated versions before the instruments were evaluated by cognitive debriefing interviews with samples of five Spanish (US) and five Japanese IBS-D patients. Linguistic and cultural adaptation concerns identified during the translatability assessment required minor revisions, mainly the presentation of dates/times and word structure. During the cognitive debriefing interviews, two of five Spanish respondents misunderstood the term "bowel movement" to mean only diarrhea in the Spanish version. Consequently, the term was changed from "movimiento intestinal" to "evacuaciones". None of the Japanese respondents identified issues with the Japanese version. The translatability of the IBS-D PRO instrument into ten target languages was confirmed, with only minor changes made to the translations of the instrument. The translation and linguistic validation into Spanish (US) and Japanese provide evidence that this instrument can be used in multinational trials and clinical settings.

Using XML and Java for Astronomical Instrumentation Control

NASA Technical Reports Server (NTRS)

Ames, Troy; Koons, Lisa; Sall, Ken; Warsaw, Craig

2000-01-01

Traditionally, instrument command and control systems have been highly specialized, consisting mostly of custom code that is difficult to develop, maintain, and extend. Such solutions are initially very costly and are inflexible to subsequent engineering change requests, increasing software maintenance costs. Instrument description is too tightly coupled with details of implementation. NASA Goddard Space Flight Center is developing a general and highly extensible framework that applies to any kind of instrument that can be controlled by a computer. The software architecture combines the platform independent processing capabilities of Java with the power of the Extensible Markup Language (XML), a human readable and machine understandable way to describe structured data. A key aspect of the object-oriented architecture is software that is driven by an instrument description, written using the Instrument Markup Language (IML). ]ML is used to describe graphical user interfaces to control and monitor the instrument, command sets and command formats, data streams, and communication mechanisms. Although the current effort is targeted for the High-resolution Airborne Wideband Camera, a first-light instrument of the Stratospheric Observatory for Infrared Astronomy, the framework is designed to be generic and extensible so that it can be applied to any instrument.

Tough2{_}MP: A parallel version of TOUGH2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Keni; Wu, Yu-Shu; Ding, Chris

2003-04-09

TOUGH2{_}MP is a massively parallel version of TOUGH2. It was developed for running on distributed-memory parallel computers to simulate large simulation problems that may not be solved by the standard, single-CPU TOUGH2 code. The new code implements an efficient massively parallel scheme, while preserving the full capacity and flexibility of the original TOUGH2 code. The new software uses the METIS software package for grid partitioning and AZTEC software package for linear-equation solving. The standard message-passing interface is adopted for communication among processors. Numerical performance of the current version code has been tested on CRAY-T3E and IBM RS/6000 SP platforms. Inmore » addition, the parallel code has been successfully applied to real field problems of multi-million-cell simulations for three-dimensional multiphase and multicomponent fluid and heat flow, as well as solute transport. In this paper, we will review the development of the TOUGH2{_}MP, and discuss the basic features, modules, and their applications.« less

Primer3_masker: integrating masking of template sequence with primer design software.

PubMed

Kõressaar, Triinu; Lepamets, Maarja; Kaplinski, Lauris; Raime, Kairi; Andreson, Reidar; Remm, Maido

2018-06-01

Designing PCR primers for amplifying regions of eukaryotic genomes is a complicated task because the genomes contain a large number of repeat sequences and other regions unsuitable for amplification by PCR. We have developed a novel k-mer based masking method that uses a statistical model to detect and mask failure-prone regions on the DNA template prior to primer design. We implemented the software as a standalone software primer3_masker and integrated it into the primer design program Primer3. The standalone version of primer3_masker is implemented in C. The source code is freely available at https://github.com/bioinfo-ut/primer3_masker/ (standalone version for Linux and macOS) and at https://github.com/primer3-org/primer3/ (integrated version). Primer3 web application that allows masking sequences of 196 animal and plant genomes is available at http://primer3.ut.ee/. maido.remm@ut.ee. Supplementary data are available at Bioinformatics online.

Buckets: Aggregative, Intelligent Agents for Publishing

NASA Technical Reports Server (NTRS)

Nelson, Michael L.; Maly, Kurt; Shen, Stewart N. T.; Zubair, Mohammad

1998-01-01

Buckets are an aggregative, intelligent construct for publishing in digital libraries. The goal of research projects is to produce information. This information is often instantiated in several forms, differentiated by semantic types (report, software, video, datasets, etc.). A given semantic type can be further differentiated by syntactic representations as well (PostScript version, PDF version, Word version, etc.). Although the information was created together and subtle relationships can exist between them, different semantic instantiations are generally segregated along currently obsolete media boundaries. Reports are placed in report archives, software might go into a software archive, but most of the data and supporting materials are likely to be kept in informal personal archives or discarded altogether. Buckets provide an archive-independent container construct in which all related semantic and syntactic data types and objects can be logically grouped together, archived, and manipulated as a single object. Furthermore, buckets are active archival objects and can communicate with each other, people, or arbitrary network services.

Replacing the IRAF/PyRAF Code-base at STScI: The Advanced Camera for Surveys (ACS)

NASA Astrophysics Data System (ADS)

Lucas, Ray A.; Desjardins, Tyler D.; STScI ACS (Advanced Camera for Surveys) Team

2018-06-01

IRAF/PyRAF are no longer viable on the latest hardware often used by HST observers, therefore STScI no longer actively supports IRAF or PyRAF for most purposes. STScI instrument teams are in the process of converting all of our data processing and analysis code from IRAF/PyRAF to Python, including our calibration reference file pipelines and data reduction software. This is exemplified by our latest ACS Data Handbook, version 9.0, which was recently published in February 2018. Examples of IRAF and PyRAF commands have now been replaced by code blocks in Python, with references linked to documentation on how to download and install the latest Python software via Conda and AstroConda. With the temporary exception of the ACS slitless spectroscopy tool aXe, all ACS-related software is now independent of IRAF/PyRAF. A concerted effort has been made across STScI divisions to help the astronomical community transition from IRAF/PyRAF to Python, with tools such as Python Jupyter notebooks being made to give users workable examples. In addition to our code changes, the new ACS data handbook discusses the latest developments in charge transfer efficiency (CTE) correction, bias de-striping, and updates to the creation and format of calibration reference files among other topics.

Monte Carlo Shower Counter Studies

NASA Technical Reports Server (NTRS)

Snyder, H. David

1991-01-01

Activities and accomplishments related to the Monte Carlo shower counter studies are summarized. A tape of the VMS version of the GEANT software was obtained and installed on the central computer at Gallaudet University. Due to difficulties encountered in updating this VMS version, a decision was made to switch to the UNIX version of the package. This version was installed and used to generate the set of data files currently accessed by various analysis programs. The GEANT software was used to write files of data for positron and proton showers. Showers were simulated for a detector consisting of 50 alternating layers of lead and scintillator. Each file consisted of 1000 events at each of the following energies: 0.1, 0.5, 2.0, 10, 44, and 200 GeV. Data analysis activities related to clustering, chi square, and likelihood analyses are summarized. Source code for the GEANT user subprograms and data analysis programs are provided along with example data plots.

Development of dedicated target tracking capability for the CERES instruments through flight software: enhancing radiometric validation and on-orbit calibration

NASA Astrophysics Data System (ADS)

Teague, Kelly K.; Smith, G. Louis; Priestley, Kory; Lukashin, Constantine; Roithmayr, Carlos

2012-09-01

Five CERES scanning radiometers have been flown to date. The Proto-Flight Model flew aboard the Tropical Rainfall Measurement Mission spacecraft in November 1997. Two CERES instruments, Flight Models (FM) 1 and 2, are aboard the Terra spacecraft, which was launched in December 1999. Two more CERES instruments, FM-3 and FM-4, are on the Aqua spacecraft, which was placed in orbit in May 2002. These instruments continue to operate after providing over a decade of Earth Radiation Budget data. The CERES FM-5 instrument, onboard the Suomi-NPP spacecraft, launched in October 2011. The CERES FM- 6 instrument is manifested on the JPPS-1 spacecraft to be launched in December 2016. A successor to these instruments is presently in the definition stage. This paper describes the evolving role of flight software in the operation of these instruments to meet the Science objectives of the mission and also the ability to execute supplemental tasks as they evolve. In order to obtain and maintain high accuracy in the data products from these instruments, a number of operational activities have been developed and implemented since the instruments were originally designed and placed in orbit. These new activities are possible because of the ability to exploit and modify the flight software, which operates the instruments. The CERES Flight Software interface was designed to allow for on-orbit modification, and as such, constantly evolves to meet changing needs. The purpose of this paper is to provide a brief overview of modifications which have been developed to allow dedicated targeting of specific geographic locations as the CERES sensor flies overhead on its host spacecraft. This new observing strategy greatly increases the temporal and angular sampling for specific targets of high scientific interest.

SEPAC software configuration control plan and procedures, revision 1

NASA Technical Reports Server (NTRS)

1981-01-01

SEPAC Software Configuration Control Plan and Procedures are presented. The objective of the software configuration control is to establish the process for maintaining configuration control of the SEPAC software beginning with the baselining of SEPAC Flight Software Version 1 and encompass the integration and verification tests through Spacelab Level IV Integration. They are designed to provide a simplified but complete configuration control process. The intent is to require a minimum amount of paperwork but provide total traceability of SEPAC software.

Basic Training

ERIC Educational Resources Information Center

Branzburg, Jeffrey

2006-01-01

In April 2006, Apple released a beta version of Boot Camp, a free software product that enables the installation of Windows XP (Home Edition or Professional with Service Pack 2) on an Intel-based Mac. (A beta version is not the final version, but it is ready for end users to try and test.) Essentially, Boot Camp splits your Mac into two hard…

BehavePlus fire modeling system, version 5.0: Variables

Treesearch

Patricia L. Andrews

2009-01-01

This publication has been revised to reflect updates to version 4.0 of the BehavePlus software. It was originally published as the BehavePlus fire modeling system, version 4.0: Variables in July, 2008.The BehavePlus fire modeling system is a computer program based on mathematical models that describe wildland fire behavior and effects and the...

Software for Classroom Music Making.

ERIC Educational Resources Information Center

Ely, Mark C.

1992-01-01

Describes musical instrument digital interface (MIDI), a communication system that uses digital data to enable MIDI-equipped instruments to communicate with each other. Includes discussion of music editors, sequencers, compositional software, and commonly used computers. Suggests uses for the technology for students and teachers. Urges further…

Systems development of a stall/spin research facility using remotely controlled/augmented aircraft models. Volume 1: Systems overview

NASA Technical Reports Server (NTRS)

Montoya, R. J.; Jai, A. R.; Parker, C. D.

1979-01-01

A ground based, general purpose, real time, digital control system simulator (CSS) is specified, developed, and integrated with the existing instrumentation van of the testing facility. This CSS is built around a PDP-11/55, and its operational software was developed to meet the dual goal of providing the immediate capability to represent the F-18 drop model control laws and the flexibility for expansion to represent more complex control laws typical of control configured vehicles. Overviews of the two CSS's developed are reviewed as well as the overall system after their integration with the existing facility. Also the latest version of the F-18 drop model control laws (REV D) is described and the changes needed for its incorporation in the digital and analog CSS's are discussed.

A New Approach of Personality and Psychiatric Disorders: A Short Version of the Affective Neuroscience Personality Scales

PubMed Central

Pingault, Jean-Baptiste; Falissard, Bruno; Côté, Sylvana; Berthoz, Sylvie

2012-01-01

Background The Affective Neuroscience Personality Scales (ANPS) is an instrument designed to assess endophenotypes related to activity in the core emotional systems that have emerged from affective neuroscience research. It operationalizes six emotional endophenotypes with empirical evidence derived from ethology, neural analyses and pharmacology: PLAYFULNESS/joy, SEEKING/interest, CARING/nurturance, ANGER/rage, FEAR/anxiety, and SADNESS/separation distress. We aimed to provide a short version of this questionnaire (ANPS-S). Methodology/Principal Findings We used a sample of 830 young French adults which was randomly split into two subsamples. The first subsample was used to select the items for the short scales. The second subsample and an additional sample of 431 Canadian adults served to evaluate the psychometric properties of the short instrument. The ANPS-S was similar to the long version regarding intercorrelations between the scales and gender differences. The ANPS-S had satisfactory psychometric properties, including factorial structure, unidimensionality of all scales, and internal consistency. The scores from the short version were highly correlated with the scores from the long version. Conclusions/Significance The short ANPS proves to be a promising instrument to assess endophenotypes for psychiatrically relevant science. PMID:22848510

Psychometric Properties of the Arabic Version of the Summary of Diabetes Self-Care Activities Instrument.

PubMed

Sukkarieh-Haraty, Ola; Howard, Elizabeth

2016-01-01

Translation of instruments needs to ensure equivalence between the source and the target language to establish the psychometric properties of the translated version. The purpose of this study was to examine the psychometric properties of the Arabic version of the Summary of Diabetes Self-Care Activities (SDSCA) instrument. The 12-item English version of the SDSCA was translated into Arabic using back translation on a sample of 140 Lebanese participants with Type 2 diabetes. Construct validity was measured using exploratory factor analysis with varimax rotation. Multitrait scaling analysis was used to test for item convergent and discriminant validity based on item-scale correlations. Conceptual and content validity were examined by an expert panel in diabetes. Internal consistency reliability R was assessed using interitem correlations. The average interitem correlation for the four subscales ranged between--.05 for Diet and .66 for Glucose Testing. Factor analysis identified four factors which accounted for 60% of the variance. The preliminary results of Summary of Diabetes Self-Care Activities-Arabic Version (SDSCA-Ar) are comparable to the psychometric properties the original SDSCA. SDSCA-Ar is a valid measure of diabetes self-care in Lebanese patients with diabetes.

To Your Health: NLM Update—MedlinePlus

MedlinePlus

... are using the current version of iTunes' client software on your computer and if you have an ... on other podcast distribution sites. If a podcast software client requires you to cut and paste a ...

Space shuttle on-orbit flight control software requirements, preliminary version

NASA Technical Reports Server (NTRS)

1975-01-01

Software modules associated with various flight control functions for the space shuttle orbiter are described. Data flow, interface requirements, initialization requirements and module sequencing requirements are considered. Block diagrams and tables are included.

The Expanded Capabilities Of The Cementitious Barriers Partnership Software Toolbox Version 2.0 - 14331

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burns, Heather; Flach, Greg; Smith, Frank

2014-01-10

The Cementitious Barriers Partnership (CBP) Project is a multi-disciplinary, multi-institutional collaboration supported by the U.S. Department of Energy (US DOE) Office of Tank Waste Management. The CBP program has developed a set of integrated tools (based on state-of-the-art models and leaching test methods) that help improve understanding and predictions of the long-term structural, hydraulic and chemical performance of cementitious barriers used in nuclear applications. The CBP Software Toolbox – “Version 1.0” was released early in FY2013 and was used to support DOE-EM performance assessments in evaluating various degradation mechanisms that included sulfate attack, carbonation and constituent leaching. The sulfate attackmore » analysis predicted the extent and damage that sulfate ingress will have on concrete vaults over extended time (i.e., > 1000 years) and the carbonation analysis provided concrete degradation predictions from rebar corrosion. The new release “Version 2.0” includes upgraded carbonation software and a new software module to evaluate degradation due to chloride attack. Also included in the newer version are a dual regime module allowing evaluation of contaminant release in two regimes – both fractured and un-fractured. The integrated software package has also been upgraded with new plotting capabilities and many other features that increase the “user-friendliness” of the package. Experimental work has been generated to provide data to calibrate the models to improve the credibility of the analysis and reduce the uncertainty. Tools selected for and developed under this program have been used to evaluate and predict the behavior of cementitious barriers used in near-surface engineered waste disposal systems for periods of performance up to or longer than 100 years for operating facilities and longer than 1000 years for waste disposal. The CBP Software Toolbox is and will continue to produce tangible benefits to the working DOE Performance Assessment (PA) community.« less

Validation of Tendril TrueHome Using Software-to-Software Comparison

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maguire, Jeffrey B; Horowitz, Scott G; Moore, Nathan

This study performed comparative evaluation of EnergyPlus version 8.6 and Tendril TrueHome, two physics-based home energy simulation models, to identify differences in energy consumption predictions between the two programs and resolve discrepancies between them. EnergyPlus is considered a benchmark, best-in-class software tool for building energy simulation. This exercise sought to improve both software tools through additional evaluation/scrutiny.

A second generation experiment in fault-tolerant software

NASA Technical Reports Server (NTRS)

Knight, J. C.

1986-01-01

The primary goal was to determine whether the application of fault tolerance to software increases its reliability if the cost of production is the same as for an equivalent nonfault tolerance version derived from the same requirements specification. Software development protocols are discussed. The feasibility of adapting to software design fault tolerance the technique of N-fold Modular Redundancy with majority voting was studied.

Orbit attitude processor. STS-1 bench program verification test plan

NASA Technical Reports Server (NTRS)

Mcclain, C. R.

1980-01-01

A plan for the static verification of the STS-1 ATT PROC ORBIT software requirements is presented. The orbit version of the SAPIENS bench program is used to generate the verification data. A brief discussion of the simulation software and flight software modules is presented along with a description of the test cases.

Software architecture standard for simulation virtual machine, version 2.0

NASA Technical Reports Server (NTRS)

Sturtevant, Robert; Wessale, William

1994-01-01

The Simulation Virtual Machine (SBM) is an Ada architecture which eases the effort involved in the real-time software maintenance and sustaining engineering. The Software Architecture Standard defines the infrastructure which all the simulation models are built from. SVM was developed for and used in the Space Station Verification and Training Facility.

The pseudo-Boolean optimization approach to form the N-version software structure

NASA Astrophysics Data System (ADS)

Kovalev, I. V.; Kovalev, D. I.; Zelenkov, P. V.; Voroshilova, A. A.

2015-10-01

The problem of developing an optimal structure of N-version software system presents a kind of very complex optimization problem. This causes the use of deterministic optimization methods inappropriate for solving the stated problem. In this view, exploiting heuristic strategies looks more rational. In the field of pseudo-Boolean optimization theory, the so called method of varied probabilities (MVP) has been developed to solve problems with a large dimensionality. Some additional modifications of MVP have been made to solve the problem of N-version systems design. Those algorithms take into account the discovered specific features of the objective function. The practical experiments have shown the advantage of using these algorithm modifications because of reducing a search space.

CONRAD Software Architecture

NASA Astrophysics Data System (ADS)

Guzman, J. C.; Bennett, T.

2008-08-01

The Convergent Radio Astronomy Demonstrator (CONRAD) is a collaboration between the computing teams of two SKA pathfinder instruments, MeerKAT (South Africa) and ASKAP (Australia). Our goal is to produce the required common software to operate, process and store the data from the two instruments. Both instruments are synthesis arrays composed of a large number of antennas (40 - 100) operating at centimeter wavelengths with wide-field capabilities. Key challenges are the processing of high volume of data in real-time as well as the remote mode of operations. Here we present the software architecture for CONRAD. Our design approach is to maximize the use of open solutions and third-party software widely deployed in commercial applications, such as SNMP and LDAP, and to utilize modern web-based technologies for the user interfaces, such as AJAX.

Integrating a flexible modeling framework (FMF) with the network security assessment instrument to reduce software security risk

NASA Technical Reports Server (NTRS)

Gilliam, D. P.; Powell, J. D.

2002-01-01

This paper presents a portion of an overall research project on the generation of the network security assessment instrument to aid developers in assessing and assuring the security of software in the development and maintenance lifecycles.

Industrial Waste Management Evaluation Model Version 3.1

EPA Pesticide Factsheets

IWEM is a screening level ground water model designed to simulate contaminant fate and transport. IWEM v3.1 is the latest version of the IWEM software, which includes additional tools to evaluate the beneficial use of industrial materials

Aviation Environmental Design Tool (AEDT): Version 2c: User Guide

DOT National Transportation Integrated Search

2016-09-12

The Federal Aviation Administration, Office of Environment and Energy (FAA-AEE) has developed the Aviation Environmental Design Tool (AEDT) version 2c software system with the support of the following development team: FAA, National Aeronautics and S...

Aviation Environmental Design Tool (AEDT) version 2b, user guide

DOT National Transportation Integrated Search

2016-06-09

The Federal Aviation Administration, Office of Environment and Energy (FAA-AEE) has developed the Aviation Environmental Design Tool (AEDT) version 2b software system with the support of the following development team: FAA, National Aeronautics and S...

IDC Re-Engineering Phase 2 Iteration E2 Use Case Realizations Version 1.2.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamlet, Benjamin R.; Harris, James M.; Burns, John F.

2016-12-01

This document contains 4 use case realizations generated from the model contained in Rational Software Architect. These use case realizations are the current versions of the realizations originally delivered in Elaboration Iteration 2.

Aviation Environmental Design Tool (AEDT) technical manual version 2a

DOT National Transportation Integrated Search

2014-01-01

The Federal Aviation Administration, Office of Environment and Energy (FAA-AEE) has developed the Aviation : Environmental Design Tool (AEDT) version 2a software system with the support of the following development team: : FAA, National Aeronautics a...

Aviation Environmental Design Tool (AEDT) technical manual : version 2c

DOT National Transportation Integrated Search

2016-09-12

The Federal Aviation Administration, Office of Environment and Energy (FAA-AEE) has developed the Aviation Environmental Design Tool (AEDT) version 2c software system with the support of the following development team: FAA, National Aeronautics and S...

Aviation Environmental Design Tool (AEDT) user guide version 2a

DOT National Transportation Integrated Search

2014-01-23

The Federal Aviation Administration, Office of Environment and Energy (FAA-AEE) has developed the Aviation : Environmental Design Tool (AEDT) version 2a software system with the support of the following development team: : FAA, National Aeronautics a...

76 FR 12091 - Commission Information Collection Activities, Proposed Collections; Comment Request; Extension

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-04

... Microsoft Excel version of the Form 561. The Microsoft Excel version of the Form 561 has been available... of the Excel software to make filling the form out easier and compiling the filed information more...

Cross-instrument Analysis Correlation Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

McJunkin, Timothy R.

This program has been designed to assist with the tracking of a sample from one analytical instrument to another such as SEM, microscopes, micro x-ray diffraction and other instruments where particular positions/locations on the sample are examined, photographed, etc. The software is designed to easily enter the position of fiducials and locations of interest such that in a future session in the same of different instrument the positions of interest can be re-found through using the known location fiducials in the current and reference session to transform the point into the current sessions coordinate system. The software is dialog boxmore » driven guiding the user through the necessary data entry and program choices. Information is stored in a series of text based extensible markup language (XML) files.« less

Airborne single particle mass spectrometers (SPLAT II & miniSPLAT) and new software for data visualization and analysis in a geo-spatial context.

PubMed

Zelenyuk, Alla; Imre, Dan; Wilson, Jacqueline; Zhang, Zhiyuan; Wang, Jun; Mueller, Klaus

2015-02-01

Understanding the effect of aerosols on climate requires knowledge of the size and chemical composition of individual aerosol particles-two fundamental properties that determine an aerosol's optical properties and ability to serve as cloud condensation or ice nuclei. Here we present our aircraft-compatible single particle mass spectrometers, SPLAT II and its new, miniaturized version, miniSPLAT that measure in-situ and in real-time the size and chemical composition of individual aerosol particles with extremely high sensitivity, temporal resolution, and sizing precision on the order of a monolayer. Although miniSPLAT's size, weight, and power consumption are significantly smaller, its performance is on par with SPLAT II. Both instruments operate in dual data acquisition mode to measure, in addition to single particle size and composition, particle number concentrations, size distributions, density, and asphericity with high temporal resolution. We also present ND-Scope, our newly developed interactive visual analytics software package. ND-Scope is designed to explore and visualize the vast amount of complex, multidimensional data acquired by our single particle mass spectrometers, along with other aerosol and cloud characterization instruments on-board aircraft. We demonstrate that ND-Scope makes it possible to visualize the relationships between different observables and to view the data in a geo-spatial context, using the interactive and fully coupled Google Earth and Parallel Coordinates displays. Here we illustrate the utility of ND-Scope to visualize the spatial distribution of atmospheric particles of different compositions, and explore the relationship between individual particle compositions and their activity as cloud condensation nuclei.

Brazilian transcultural adaptation of an instrument on physicians' knowledge and attitudes towards dementia

PubMed Central

Jacinto, Alessandro Ferrari; de Oliveira, Erika Correa; Citero, Vanessa de Albuquerque

2015-01-01

Objective The aim of this study was to obtain a Brazilian transcultural adaptation of an instrument developed in the United Kingdom for assessing the knowledge and attitudes towards dementia by physicians. Methods The "Knowledge Quiz" (KQ) contains 14 items on epidemiology, diagnosis and management of dementia, while the "Attitude Quiz" contains 10 sentences about physicians' thoughts on the management of demented patients. The Quizzes were translated, back-translated and the resultant version applied to five physicians. Results The transcultural equivalence process was performed and four items of the KQ needed adapting to the Brazilian context. After changes suggested by a panel of specialists, the final version was applied to another five physicians and the transcultural equivalence considered adequate. Conclusion The Brazilian version of the instrument was successfully transculturally adapted for future validation and application in Brazil. PMID:29213968

DSS command software update

NASA Technical Reports Server (NTRS)

Stinnett, W. G.

1980-01-01

The modifications, additions, and testing results for a version of the Deep Space Station command software, generated for support of the Voyager Saturn encounter, are discussed. The software update requirements included efforts to: (1) recode portions of the software to permit recovery of approximately 2000 words of memory; (2) correct five Voyager Ground data System liens; (3) provide capability to automatically turn off the command processor assembly local printer during periods of low activity; and (4) correct anomalies existing in the software.

On-Orbit Software Analysis

NASA Technical Reports Server (NTRS)

Moran, Susanne I.

2004-01-01

The On-Orbit Software Analysis Research Infusion Project was done by Intrinsyx Technologies Corporation (Intrinsyx) at the National Aeronautics and Space Administration (NASA) Ames Research Center (ARC). The Project was a joint collaborative effort between NASA Codes IC and SL, Kestrel Technology (Kestrel), and Intrinsyx. The primary objectives of the Project were: Discovery and verification of software program properties and dependencies, Detection and isolation of software defects across different versions of software, and Compilation of historical data and technical expertise for future applications

Annotated bibliography of software engineering laboratory literature

NASA Technical Reports Server (NTRS)

Groves, Paula; Valett, Jon

1990-01-01

An annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory is given. More than 100 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials have been grouped into eight general subject areas for easy reference: the Software Engineering Laboratory; the Software Engineering Laboratory-software development documents; software tools; software models; software measurement; technology evaluations; Ada technology; and data collection. Subject and author indexes further classify these documents by specific topic and individual author.

Annotated bibliography of Software Engineering Laboratory literature

NASA Technical Reports Server (NTRS)

Morusiewicz, Linda; Valett, Jon

1993-01-01

This document is an annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. Nearly 200 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials have been grouped into eight general subject areas for easy reference: the Software Engineering Laboratory; the Software Engineering Laboratory: software development documents; software tools; software models; software measurement; technology evaluations; Ada technology; and data collection. This document contains an index of these publications classified by individual author.

Cross-cultural adaptation of the Nordic musculoskeletal questionnaire.

PubMed

de Barros, E N C; Alexandre, N M C

2003-06-01

Reports in the literature have identified a need for internationally standardized and reliable measurements to analyse musculoskeletal symptoms. Screening of musculoskeletal disorders may serve as a diagnostic tool to evaluate the work environment. The Nordic general questionnaire is a standardized instrument used to analyse musculoskeletal symptoms in an ergonomic or occupational health context. To translate and adapt a version of the Nordic general questionnaire into Brazilian Portuguese and evaluate its reliability. The cross-cultural adaptation was performed according to internationally recommended methodology, using the following guidelines: translation; back-translation; committee review; and pretesting. First, the questionnaire was independently translated into Portuguese by two teachers and one doctor, and a consensus version was generated. Second, two other translators performed a back-translation independently from one another. This version was then submitted to a committee, consisting of six specialists in the area of knowledge of the instrument, to evaluate its equivalence to the original instrument. The final version was pretested on 20 subjects randomly selected in an outpatient clinic. Reliability was assessed by a test-retest procedure at 1-day intervals using the Kappa coefficient in a group of 40 subjects. The Kappa agreement values were calculated for each one of the four questions of the questionnaire. The agreement among the same observers was substantial, varying from 0.88 to 1, according to the Kappa values. these demonstrated strong agreement of the instrument, suggesting that the Brazilian version of the "Standardized Nordic Questionnaire" offers substantial reliability.

Centralized Monitoring of the Microsoft Windows-based computers of the LHC Experiment Control Systems

NASA Astrophysics Data System (ADS)

Varela Rodriguez, F.

2011-12-01

The control system of each of the four major Experiments at the CERN Large Hadron Collider (LHC) is distributed over up to 160 computers running either Linux or Microsoft Windows. A quick response to abnormal situations of the computer infrastructure is crucial to maximize the physics usage. For this reason, a tool was developed to supervise, identify errors and troubleshoot such a large system. Although the monitoring of the performance of the Linux computers and their processes was available since the first versions of the tool, it is only recently that the software package has been extended to provide similar functionality for the nodes running Microsoft Windows as this platform is the most commonly used in the LHC detector control systems. In this paper, the architecture and the functionality of the Windows Management Instrumentation (WMI) client developed to provide centralized monitoring of the nodes running different flavour of the Microsoft platform, as well as the interface to the SCADA software of the control systems are presented. The tool is currently being commissioned by the Experiments and it has already proven to be very efficient optimize the running systems and to detect misbehaving processes or nodes.

Automation of the 1.3-meter Robotically Controlled Telescope (RCT)

NASA Astrophysics Data System (ADS)

Gelderman, Richard; Treffers, Richard R.

2011-03-01

This poster describes the automation for the Robotically Controlled Telescope (RCT) Consortium of the 50-inch telescope at Kitt Peak National Observatory. Building upon the work of the previous contractor the telescope, dome and instrument were wired for totally autonomous (robotic) observations. The existing motors, encoders, limit switches and cables were connected to an open industrial panel that allows easy interconnection, troubleshooting and modifications. A sixteen axis Delta Tau Turbo PMAC controller is used to control all motors, encoders, flat field lights and many of the digital functions of the telescope. ADAM industrial I/O bricks are used for additional digital and analog I/O functions. Complex relay logic problems, such as the mirror cover opening sequence and the slit control, are managed using Allen Bradley Pico PLDs. Most of the low level software is written in C using the GNU compiler. The basic functionality uses an ASCII protocol communicating over Berkeley sockets. Early versions of this software were developed at U.C. Berkeley, for what was to become the Katzman Automatic Imaging Telescope (KAIT) at Lick Observatory. ASCII communications are useful for control, testing and easy to debug by looking at the log files; C-shell scripts are written to form more complex orchestrations.

Software development to implement the TxDOT culvert rating guide.

DOT National Transportation Integrated Search

2013-05-01

This implementation project created CULVLR: Culvert Load Rating, Version 1.0.0, a Windows-based : desktop application software package that automates the process by which Texas Department of Transportation : (TxDOT) engineers and their consultants ...

Evaluation of a breast software model for 2D and 3D X-ray imaging studies of the breast.

PubMed

Baneva, Yanka; Bliznakova, Kristina; Cockmartin, Lesley; Marinov, Stoyko; Buliev, Ivan; Mettivier, Giovanni; Bosmans, Hilde; Russo, Paolo; Marshall, Nicholas; Bliznakov, Zhivko

2017-09-01

In X-ray imaging, test objects reproducing breast anatomy characteristics are realized to optimize issues such as image processing or reconstruction, lesion detection performance, image quality and radiation induced detriment. Recently, a physical phantom with a structured background has been introduced for both 2D mammography and breast tomosynthesis. A software version of this phantom and a few related versions are now available and a comparison between these 3D software phantoms and the physical phantom will be presented. The software breast phantom simulates a semi-cylindrical container filled with spherical beads of different diameters. Four computational breast phantoms were generated with a dedicated software application and for two of these, physical phantoms are also available and they are used for the side by side comparison. Planar projections in mammography and tomosynthesis were simulated under identical incident air kerma conditions. Tomosynthesis slices were reconstructed with an in-house developed reconstruction software. In addition to a visual comparison, parameters like fractal dimension, power law exponent β and second order statistics (skewness, kurtosis) of planar projections and tomosynthesis reconstructed images were compared. Visually, an excellent agreement between simulated and real planar and tomosynthesis images is observed. The comparison shows also an overall very good agreement between parameters evaluated from simulated and experimental images. The computational breast phantoms showed a close match with their physical versions. The detailed mathematical analysis of the images confirms the agreement between real and simulated 2D mammography and tomosynthesis images. The software phantom is ready for optimization purpose and extrapolation of the phantom to other breast imaging techniques. Copyright © 2017 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

Solar Constant (SOLCON) Experiment: Ground Support Equipment (GSE) software development

NASA Technical Reports Server (NTRS)

Gibson, M. Alan; Thomas, Susan; Wilson, Robert

1991-01-01

The Solar Constant (SOLCON) Experiment, the objective of which is to determine the solar constant value and its variability, is scheduled for launch as part of the Space Shuttle/Atmospheric Laboratory for Application and Science (ATLAS) spacelab mission. The Ground Support Equipment (GSE) software was developed to monitor and analyze the SOLCON telemetry data during flight and to test the instrument on the ground. The design and development of the GSE software are discussed. The SOLCON instrument was tested during Davos International Solar Intercomparison, 1989 and the SOLCON data collected during the tests are analyzed to study the behavior of the instrument.

Enhanced CARES Software Enables Improved Ceramic Life Prediction

NASA Technical Reports Server (NTRS)

Janosik, Lesley A.

1997-01-01

The NASA Lewis Research Center has developed award-winning software that enables American industry to establish the reliability and life of brittle material (e.g., ceramic, intermetallic, graphite) structures in a wide variety of 21st century applications. The CARES (Ceramics Analysis and Reliability Evaluation of Structures) series of software is successfully used by numerous engineers in industrial, academic, and government organizations as an essential element of the structural design and material selection processes. The latest version of this software, CARES/Life, provides a general- purpose design tool that predicts the probability of failure of a ceramic component as a function of its time in service. CARES/Life was recently enhanced by adding new modules designed to improve functionality and user-friendliness. In addition, a beta version of the newly-developed CARES/Creep program (for determining the creep life of monolithic ceramic components) has just been released to selected organizations.

CASPER Version 2.0

NASA Technical Reports Server (NTRS)

Chien, Steve; Rabideau, Gregg; Tran, Daniel; Knight, Russell; Chouinard, Caroline; Estlin, Tara; Gaines, Daniel; Clement, Bradley; Barrett, Anthony

2007-01-01

CASPER is designed to perform automated planning of interdependent activities within a system subject to requirements, constraints, and limitations on resources. In contradistinction to the traditional concept of batch planning followed by execution, CASPER implements a concept of continuous planning and replanning in response to unanticipated changes (including failures), integrated with execution. Improvements over other, similar software that have been incorporated into CASPER version 2.0 include an enhanced executable interface to facilitate integration with a wide range of execution software systems and supporting software libraries; features to support execution while reasoning about urgency, importance, and impending deadlines; features that enable accommodation to a wide range of computing environments that include various central processing units and random- access-memory capacities; and improved generic time-server and time-control features.

Research Traffic Management Advisor (rTMA) Up-level Final Report

NASA Technical Reports Server (NTRS)

Capps, Richard A.

2013-01-01

The FAA Time Based Flow Management (TBFM) Program provides for operational use and continued development of the Traffic Management Advisor (TMA) technology that NASA demonstrated in 1996. Although NASA's Center-TRACON Automation System (CTAS) software baseline includes advanced versions of TMA, some research activities are better served by a version of TMA that more closely matches the FAA's TBFM software. Beginning in 2009, NASA created Research TMA (rTMA) to enable researchers to work with FAA TBFM software in a research environment. The original rTMA was derived from TBFM v3.10 and later up-leveled to TBFM v3.12. This report documents the most recent up-level effort in which rTMA was re-derived from TBFM v4.00.07.

Launching GUPPI: the Green Bank Ultimate Pulsar Processing Instrument

NASA Astrophysics Data System (ADS)

DuPlain, Ron; Ransom, Scott; Demorest, Paul; Brandt, Patrick; Ford, John; Shelton, Amy L.

2008-08-01

The National Radio Astronomy Observatory (NRAO) is launching the Green Bank Ultimate Pulsar Processing Instrument (GUPPI), a prototype flexible digital signal processor designed for pulsar observations with the Robert C. Byrd Green Bank Telescope (GBT). GUPPI uses field programmable gate array (FPGA) hardware and design tools developed by the Center for Astronomy Signal Processing and Electronics Research (CASPER) at the University of California, Berkeley. The NRAO has been concurrently developing GUPPI software and hardware using minimal software resources. The software handles instrument monitor and control, data acquisition, and hardware interfacing. GUPPI is currently an expert-only spectrometer, but supports future integration with the full GBT production system. The NRAO was able to take advantage of the unique flexibility of the CASPER FPGA hardware platform, develop hardware and software in parallel, and build a suite of software tools for monitoring, controlling, and acquiring data with a new instrument over a short timeline of just a few months. The NRAO interacts regularly with CASPER and its users, and GUPPI stands as an example of what reconfigurable computing and open-source development can do for radio astronomy. GUPPI is modular for portability, and the NRAO provides the results of development as an open-source resource.

Penn State University ground software support for X-ray missions.

NASA Astrophysics Data System (ADS)

Townsley, L. K.; Nousek, J. A.; Corbet, R. H. D.

1995-03-01

The X-ray group at Penn State is charged with two software development efforts in support of X-ray satellite missions. As part of the ACIS instrument team for AXAF, the authors are developing part of the ground software to support the instrument's calibration. They are also designing a translation program for Ginga data, to change it from the non-standard FRF format, which closely parallels the original telemetry format, to FITS.

Inventory of Personal Skills for Achievement: Validity and Reliability Study of an Instrument for Identifying Educationally At-Risk Junior [High] School Students.

ERIC Educational Resources Information Center

Leaseburg, Melinda G.; And Others

This paper describes the development and test of an early-warning instrument for identifying at-risk students aged 10-15. A statistically sound test to identify at-risk high school students existed in the Personal Skills Map--Adolescent version (PSMA-A). This study used a modified version of PSM-A , which was renamed Personal Skills for…

Multifractal geometry in analysis and processing of digital retinal photographs for early diagnosis of human diabetic macular edema.

PubMed

Tălu, Stefan

2013-07-01

The purpose of this paper is to determine a quantitative assessment of the human retinal vascular network architecture for patients with diabetic macular edema (DME). Multifractal geometry and lacunarity parameters are used in this study. A set of 10 segmented and skeletonized human retinal images, corresponding to both normal (five images) and DME states of the retina (five images), from the DRIVE database was analyzed using the Image J software. Statistical analyses were performed using Microsoft Office Excel 2003 and GraphPad InStat software. The human retinal vascular network architecture has a multifractal geometry. The average of generalized dimensions (Dq) for q = 0, 1, 2 of the normal images (segmented versions), is similar to the DME cases (segmented versions). The average of generalized dimensions (Dq) for q = 0, 1 of the normal images (skeletonized versions), is slightly greater than the DME cases (skeletonized versions). However, the average of D2 for the normal images (skeletonized versions) is similar to the DME images. The average of lacunarity parameter, Λ, for the normal images (segmented and skeletonized versions) is slightly lower than the corresponding values for DME images (segmented and skeletonized versions). The multifractal and lacunarity analysis provides a non-invasive predictive complementary tool for an early diagnosis of patients with DME.

Cross-cultural adaptation and validation of the persian version of the oxford knee score in patients with knee osteoarthritis.

PubMed

Ebrahimzadeh, Mohammad Hosein; Makhmalbaf, Hadi; Birjandinejad, Ali; Soltani-Moghaddas, Seyed Hosein

2014-11-01

The Oxford Knee Score (OKS) is a short patient-reported outcome instrument that measures pain and physical activity related to knee osteoarthritis. The purpose of this study is to evaluate, construct validity and consistent reliability of the Persian version of the OKS. The case series consisted of 80 patients who were clinically diagnosed with having knee osteoarthritis. All patients were requested to fill-in the Persian OKS and Short-Form 36 Health Survey (SF-36). Correlation analysis between the Persian versions of these two instruments was then carried out. The scores of the Persian SF-36 were used to evaluate convergent and divergent validity of the 12-item Persian OKS. From a total of 80 patients, 63 were female (79%) and the remaining 17 were male (21%) with a mean age of 52.2 years. In the present study, high Cronbach's alpha of 0.95 confirms excellent internal consistency of the Persian OKS scale similar to previous investigations. The results confirm that the Persian version of this instrument is valid and reliable, similar to its English index and its subsequent translations in different languages. The Persian OKS is a reliable instrument to evaluate knee function in patients with knee osteoarthritis and is a useful tool for outcome measurement in clinical research.

Software requirements flow-down and preliminary software design for the G-CLEF spectrograph

NASA Astrophysics Data System (ADS)

Evans, Ian N.; Budynkiewicz, Jamie A.; DePonte Evans, Janet; Miller, Joseph B.; Onyuksel, Cem; Paxson, Charles; Plummer, David A.

2016-08-01

The Giant Magellan Telescope (GMT)-Consortium Large Earth Finder (G-CLEF) is a fiber-fed, precision radial velocity (PRV) optical echelle spectrograph that will be the first light instrument on the GMT. The G-CLEF instrument device control subsystem (IDCS) provides software control of the instrument hardware, including the active feedback loops that are required to meet the G-CLEF PRV stability requirements. The IDCS is also tasked with providing operational support packages that include data reduction pipelines and proposal preparation tools. A formal, but ultimately pragmatic approach is being used to establish a complete and correct set of requirements for both the G-CLEF device control and operational support packages. The device control packages must integrate tightly with the state-machine driven software and controls reference architecture designed by the GMT Organization. A model-based systems engineering methodology is being used to develop a preliminary design that meets these requirements. Through this process we have identified some lessons that have general applicability to the development of software for ground-based instrumentation. For example, tasking an individual with overall responsibility for science/software/hardware integration is a key step to ensuring effective integration between these elements. An operational concept document that includes detailed routine and non- routine operational sequences should be prepared in parallel with the hardware design process to tie together these elements and identify any gaps. Appropriate time-phasing of the hardware and software design phases is important, but revisions to driving requirements that impact software requirements and preliminary design are inevitable. Such revisions must be carefully managed to ensure efficient use of resources.

Software Acquisition Risk Management Key Process Area (KPA) - A Guidebook Version 1.0.

DTIC Science & Technology

1997-08-01

Budget - Software Project Management Practices and Techniques. McGraw-Hill International (UK) Limited, 1992. [Boehm 81 ] Boehm, Barry . Software...Engineering Economics. Englewood Cliffs, N.J.: Prentice-Hall, Inc., 1981. [Boehm 89] Boehm, Barry . IEEE Tutorial on Software Risk Management. New York: IEEE...95] [Mayrhauser 90] [Moran 90] [Myers 96] [NRC 89] [Osborn 53] [Paulk 95] [ Pressman 92] [Pulford 96] [Scholtes 88] [Sisti 94] [STSC 96

Cultural adaptation and psychometric properties of the family questionnaire in a Brazilian sample of relatives of schizophrenia outpatients.

PubMed

Zanetti, Ana C G; Wiedemann, Georg; Dantas, Rosana A S; Hayashida, Miyeko; de Azevedo-Marques, João M; Galera, Sueli A F

2013-06-01

To evaluate the internal reliability and validity of the Brazilian Portuguese version of the Family Questionnaire among families of schizophrenia outpatients. The main studies about the family environment of schizophrenia patients are related to the concept of Expressed Emotion. There is currently no instrument to evaluate this concept in Brazil that is easily applicable and comparable with studies from other countries. Methodological and cross-sectional research design. A convenience sample of 130 relatives of schizophrenia outpatients was selected. The translation and cultural adaptation of the instrument involved experts in mental health and experts in the German language and included back translation, semantic evaluation of items and pretesting of the instrument with 30 relatives of schizophrenia outpatients. The psychometric properties of the instrument were studied with another 100 relatives, which fulfilled the requirements for the Brazilian Portuguese version of the instrument. The psychometric properties of the instrument were assessed by construct validity (using an analysis of its key components, comparisons between distinct groups-convergent validity with the Antonovsky's Sense of Coherence Scale) and reliability (checking the internal consistency of its items and its test-retest reproducibility). The analysis of main components confirmed dimensionality patterns that were comparable between the original and adapted versions. In two domains of the instrument, critical comments and emotional over-involvement had moderate and significant correlations, respectively, with Antonovsky's Sense of Coherence Scale, appropriate values of Cronbach's alpha and strong and significant correlations, respectively, in test-retest reproducibility. We observed significant differences between distinct groups of parents in the category of emotional over-involvement. We conclude that the Portuguese-adapted version of the Family Questionnaire is valid and reliable for the study sample. This study provided evidence that the Family Questionnaire is a reliable and valid instrument for assessing expressed emotion. It is easy and practical to use and is acceptable for use in a Brazilian cultural population. © 2012 Blackwell Publishing Ltd.

NESSUS/NASTRAN Interface (Modification of NESSUS to FORTRAN 90 Standard)

NASA Technical Reports Server (NTRS)

1997-01-01

The objective of this work has been to develop a FORTRAN 90 (F90) version of the NESSUS probabilistic analysis software, Version 6.2 with NASTRAN interface. The target platform for the modified NESSUS code is the SGI workstation.

TEMPO Software Modifications for SEVER Evaluation

DTIC Science & Technology

2009-09-01

existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding...115 COMPACT DISC. TEMPO VERSION 3 AND ASSOCIATED DATA …..ENCLOSED ix LIST...Setup..........................................................46 Figure 16. TEMPO Version 3 Startup Dialog Box

Adaptive Instrument Module: Space Instrument Controller "Brain" through Programmable Logic Devices

NASA Technical Reports Server (NTRS)

Darrin, Ann Garrison; Conde, Richard; Chern, Bobbie; Luers, Phil; Jurczyk, Steve; Mills, Carl; Day, John H. (Technical Monitor)

2001-01-01

The Adaptive Instrument Module (AIM) will be the first true demonstration of reconfigurable computing with field-programmable gate arrays (FPGAs) in space, enabling the 'brain' of the system to evolve or adapt to changing requirements. In partnership with NASA Goddard Space Flight Center and the Australian Cooperative Research Centre for Satellite Systems (CRC-SS), APL has built the flight version to be flown on the Australian university-class satellite FEDSAT. The AIM provides satellites the flexibility to adapt to changing mission requirements by reconfiguring standardized processing hardware rather than incurring the large costs associated with new builds. This ability to reconfigure the processing in response to changing mission needs leads to true evolveable computing, wherein the instrument 'brain' can learn from new science data in order to perform state-of-the-art data processing. The development of the AIM is significant in its enormous potential to reduce total life-cycle costs for future space exploration missions. The advent of RAM-based FPGAs whose configuration can be changed at any time has enabled the development of the AIM for processing tasks that could not be performed in software. The use of the AIM enables reconfiguration of the FPGA circuitry while the spacecraft is in flight, with many accompanying advantages. The AIM demonstrates the practicalities of using reconfigurable computing hardware devices by conducting a series of designed experiments. These include the demonstration of implementing data compression, data filtering, and communication message processing and inter-experiment data computation. The second generation is the Adaptive Processing Template (ADAPT) which is further described in this paper. The next step forward is to make the hardware itself adaptable and the ADAPT pursues this challenge by developing a reconfigurable module that will be capable of functioning efficiently in various applications. ADAPT will take advantage of radiation tolerant RAM-based field programmable gate array (FPGA) technology to develop a reconfigurable processor that combines the flexibility of a general purpose processor running software with the performance of application specific processing hardware for a variety of high performance computing applications.

Validation of the translation of an instrument to measure reliability of written information on treatment choices: a study on attention deficit/hyperactivity disorder (ADHD).

PubMed

Montoya, A; Llopis, N; Gilaberte, I

2011-12-01

DISCERN is an instrument designed to help patients assess the reliability of written information on treatment choices. Originally created in English, there is no validated Spanish version of this instrument. This study seeks to validate the Spanish translation of the DISCERN instrument used as a primary measure on a multicenter study aimed to assess the reliability of web-based information on treatment choices for attention deficit/hyperactivity disorder (ADHD). We used a modified version of a method for validating translated instruments in which the original source-language version is formally compared with the back-translated source-language version. Each item was ranked in terms of comparability of language, similarity of interpretability, and degree of understandability. Responses used Likert scales ranging from 1 to 7, where 1 indicates the best interpretability, language and understandability, and 7 indicates the worst. Assessments were performed by 20 raters fluent in the source language. The Spanish translation of DISCERN, based on ratings of comparability, interpretability and degree of understandability (mean score (SD): 1.8 (1.1), 1.4 (0.9) and 1.6 (1.1), respectively), was considered extremely comparable. All items received a score of less than three, therefore no further revision of the translation was needed. The validation process showed that the quality of DISCERN translation was high, validating the comparable language of the tool translated on assessing written information on treatment choices for ADHD.

Miniaturized Ion and Neutral Mass Spectrometer for CubeSat Atmospheric Measurements

NASA Technical Reports Server (NTRS)

Rodriguez, M.; Paschalidis, N.; Jones, S.; Sittler, E.; Chornay, D.; Uribe, P.; Cameron, T.

2016-01-01

To increase the number of single point in-situ measurements of thermosphere and exosphere ion and neutral composition and density, miniaturized instrumentation is in high demand to take advantage of the increasing platform opportunities available in the smallsat/cubesat industry. The INMS (Ion-Neutral Mass Spectrometer) addresses this need by providing simultaneous measurements of both the neutral and ion environment, essentially providing two instruments in one compact model. The 1.3U volume, 570 gram, 1.8W nominal power INMS instrument makes implementation into cubesat designs (3U and above) practical and feasible. With high dynamic range (0.1-500eV), mass dynamic range of 1-40amu, sharp time resolution (0.1s), and mass resolution of MdM16, the INMS instrument addresses the atmospheric science needs that otherwise would have required larger more expensive instrumentation. INMS-v1 (version 1) launched on Exocube (CalPoly 3U cubesat) in 2015 and INMS-v2 (version 2) is scheduled to launch on Dellingr (GSFC 6U cubesat) in 2017. New versions of INMS are currently being developed to increase and add measurement capabilities, while maintaining its smallsat/cubesat form.

Balloon Measurements of Electric Fields in Thunderstorms: A Modern Version of Benjamin Franklin's Kite

NASA Astrophysics Data System (ADS)

Marshall, T. C.; Stolzenburg, M.

2006-12-01

One of Benjamin Franklin's most famous experiments was the kite experiment, which showed that thunderstorms are electrically charged. It is not as commonly noted that the kite experiment was also one of the the first attempts to make an in situ measurement of any storm parameter. Franklin realized the importance of making measurements close to and within storms, and this realization has been shared by later atomspheric scientists. In this presentation we focus on a modern version of Franklin's kite--instrumented balloons--used for in situ measurements of electric field and other storm parameters. In particular, most of our knowledge of the charge structure inside thunderstorms is based on balloon soundings of electric field. Balloon measurements of storm electricity began with the work of Simpson and colleagues in the 1930's and 1940's. The next major instrumentation advances were made by Winn and colleagues in the 1970's and 1980's. Today's instruments are digital versions of the Winn design. We review the main instrument techniques that have allowed balloons to be the worthy successors to kites. We also discuss some of the key advances in our understanding of thunderstorm electrification made with in situ balloon-borne instruments.

The Virtual Genetics Lab II: Improvements to a Freely Available Software Simulation of Genetics

ERIC Educational Resources Information Center

White, Brian T.

2012-01-01

The Virtual Genetics Lab II (VGLII) is an improved version of the highly successful genetics simulation software, the Virtual Genetics Lab (VGL). The software allows students to use the techniques of genetic analysis to design crosses and interpret data to solve realistic genetics problems involving a hypothetical diploid insect. This is a brief…

HyRAM V1.0 User Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Groth, Katrina M.; Zumwalt, Hannah Ruth; Clark, Andrew Jordan

2016-03-01

Hydrogen Risk Assessment Models (HyRAM) is a prototype software toolkit that integrates data and methods relevant to assessing the safety of hydrogen fueling and storage infrastructure. The HyRAM toolkit integrates deterministic and probabilistic models for quantifying accident scenarios, predicting physical effects, and characterizing the impact of hydrogen hazards, including thermal effects from jet fires and thermal pressure effects from deflagration. HyRAM version 1.0 incorporates generic probabilities for equipment failures for nine types of components, and probabilistic models for the impact of heat flux on humans and structures, with computationally and experimentally validated models of various aspects of gaseous hydrogen releasemore » and flame physics. This document provides an example of how to use HyRAM to conduct analysis of a fueling facility. This document will guide users through the software and how to enter and edit certain inputs that are specific to the user-defined facility. Description of the methodology and models contained in HyRAM is provided in [1]. This User’s Guide is intended to capture the main features of HyRAM version 1.0 (any HyRAM version numbered as 1.0.X.XXX). This user guide was created with HyRAM 1.0.1.798. Due to ongoing software development activities, newer versions of HyRAM may have differences from this guide.« less

Comparative Evaluation of Stress Distribution in Experimentally Designed Nickel-titanium Rotary Files with Varying Cross Sections: A Finite Element Analysis.

PubMed

Basheer Ahamed, Shadir Bughari; Vanajassun, Purushothaman Pranav; Rajkumar, Kothandaraman; Mahalaxmi, Sekar

2018-04-01

Single cross-sectional nickel-titanium (NiTi) rotary instruments during continuous rotations are subjected to constant and variable stresses depending on the canal anatomy. This study was intended to create 2 new experimental, theoretic single-file designs with combinations of triple U (TU), triangle (TR), and convex triangle (CT) cross sections and to compare their bending stresses in simulated root canals with a single cross-sectional instrument using finite element analysis. A 3-dimensional model of the simulated root canal with 45° curvature and NiTi files with 5 cross-sectional designs were created using Pro/ENGINEER Wildfire 4.0 software (PTC Inc, Needham, MA) and ANSYS software (version 17; ANSYS, Inc, Canonsburg, PA) for finite element analysis. The NiTi files of 3 groups had single cross-sectional shapes of CT, TR, and TU designs, and 2 experimental groups had a CT, TR, and TU (CTU) design and a TU, TR, and CT (UTC) design. The file was rotated in simulated root canals to analyze the bending stress, and the von Mises stress value for every file was recorded in MPa. Statistical analysis was performed using the Kruskal-Wallis test and the Bonferroni-adjusted Mann-Whitney test for multiple pair-wise comparison with a P value <.05 (95 %). The maximum bending stress of the rotary file was observed in the apical third of the CT design, whereas comparatively less stress was recorded in the CTU design. The TU and TR designs showed a similar stress pattern at the curvature, whereas the UTC design showed greater stress in the apical and middle thirds of the file in curved canals. All the file designs showed a statistically significant difference. The CTU designed instruments showed the least bending stress on a 45° angulated simulated root canal when compared with all the other tested designs. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

MISR Data Product Specifications

Atmospheric Science Data Center

2016-11-25

... and usage of metadata. Improvements to MISR algorithmic software occasionally result in changes to file formats. While these changes ...  (DPS).   DPS Revision:   Rev. S Software Version:  5.0.9 Date:  September 20, 2010, updated April ...

Globus Quick Start Guide. Globus Software Version 1.1

NASA Technical Reports Server (NTRS)

1999-01-01

The Globus Project is a community effort, led by Argonne National Laboratory and the University of Southern California's Information Sciences Institute. Globus is developing the basic software infrastructure for computations that integrate geographically distributed computational and information resources.

Starlink Software Developments

NASA Astrophysics Data System (ADS)

Bly, M. J.; Giaretta, D.; Currie, M. J.; Taylor, M.

Some current and upcoming software developments from Starlink were demonstrated. These included invoking traditional Starlink applications via web services, the current version of the ORAC-DR reduction pipeline, and some new Java-based tools including Treeview, an interactive explorer of hierarchical data structures.

CICADA, CCD and Instrument Control Software

NASA Astrophysics Data System (ADS)

Young, Peter J.; Brooks, Mick; Meatheringham, Stephen J.; Roberts, William H.

Computerised Instrument Control and Data Acquisition (CICADA) is a software system for control of telescope instruments in a distributed computing environment. It is designed using object-oriented techniques and built with standard computing tools such as RPC, SysV IPC, Posix threads, Tcl, and GUI builders. The system is readily extensible to new instruments and currently supports the Astromed 3200 CCD controller and MSSSO's new tip-tilt system. Work is currently underway to provide support for the SDSU CCD controller and MSSSO's Double Beam Spectrograph. A core set of processes handle common communication and control tasks, while specific instruments are ``bolted'' on using C++ inheritance techniques.

Surrogate oracles, generalized dependency and simpler models

NASA Technical Reports Server (NTRS)

Wilson, Larry

1990-01-01

Software reliability models require the sequence of interfailure times from the debugging process as input. It was previously illustrated that using data from replicated debugging could greatly improve reliability predictions. However, inexpensive replication of the debugging process requires the existence of a cheap, fast error detector. Laboratory experiments can be designed around a gold version which is used as an oracle or around an n-version error detector. Unfortunately, software developers can not be expected to have an oracle or to bear the expense of n-versions. A generic technique is being investigated for approximating replicated data by using the partially debugged software as a difference detector. It is believed that the failure rate of each fault has significant dependence on the presence or absence of other faults. Thus, in order to discuss a failure rate for a known fault, the presence or absence of each of the other known faults needs to be specified. Also, in simpler models which use shorter input sequences without sacrificing accuracy are of interest. In fact, a possible gain in performance is conjectured. To investigate these propositions, NASA computers running LIC (RTI) versions are used to generate data. This data will be used to label the debugging graph associated with each version. These labeled graphs will be used to test the utility of a surrogate oracle, to analyze the dependent nature of fault failure rates and to explore the feasibility of reliability models which use the data of only the most recent failures.

OLS Client and OLS Dialog: Open Source Tools to Annotate Public Omics Datasets.

PubMed

Perez-Riverol, Yasset; Ternent, Tobias; Koch, Maximilian; Barsnes, Harald; Vrousgou, Olga; Jupp, Simon; Vizcaíno, Juan Antonio

2017-10-01

The availability of user-friendly software to annotate biological datasets and experimental details is becoming essential in data management practices, both in local storage systems and in public databases. The Ontology Lookup Service (OLS, http://www.ebi.ac.uk/ols) is a popular centralized service to query, browse and navigate biomedical ontologies and controlled vocabularies. Recently, the OLS framework has been completely redeveloped (version 3.0), including enhancements in the data model, like the added support for Web Ontology Language based ontologies, among many other improvements. However, the new OLS is not backwards compatible and new software tools are needed to enable access to this widely used framework now that the previous version is no longer available. We here present the OLS Client as a free, open-source Java library to retrieve information from the new version of the OLS. It enables rapid tool creation by providing a robust, pluggable programming interface and common data model to programmatically access the OLS. The library has already been integrated and is routinely used by several bioinformatics resources and related data annotation tools. Secondly, we also introduce an updated version of the OLS Dialog (version 2.0), a Java graphical user interface that can be easily plugged into Java desktop applications to access the OLS. The software and related documentation are freely available at https://github.com/PRIDE-Utilities/ols-client and https://github.com/PRIDE-Toolsuite/ols-dialog. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

[Development of a current version of a software application for research and practice in human nutrition (GRUNUMUR 2.0)].

PubMed

Pérez-Llamas, F; Garaulet, M; Torralba, C; Zamora, S

2012-01-01

The aim of this paper is the description of a new version of the software application GRUNUMUR, a useful tool for human nutrition studies designed by the Nutrition Research Group from the Murcia University. Similar to the first, this second version offers the possibility to address different types of study: dietary habits (24 h recall, 7-days dietary record and Food Frequency Questionnaire), epidemiological, anthropometrical and clinical studies. The new version, called GRUNUMUR 2.0, compatible with the first one, has an online help system for all functions of the application, providing the user tasks, allows safe storage of a virtually unlimited number of results, in an orderly and organized way, you can retrieve it when required, through a system of backups and scheduled maintenance and unattended (tasks performed by a server), another advantage is its total accessibility, both from the university intranet (www.um.es) and from the internet, it works via Web Browser (http://senver.inf.um.es/esen), and finally, allows data to be exported to Excel for further processing with other applications as well as publishing reports in PDF, to deliver study participants if necessary. The new version has been validated by comparing the extracted results with those obtained from the other software with no significant differences for any of the variables analyzed. The application GRUNUMUR 2.0 is a tool improved, useful and reliable for addressing human nutrition studies.

Inter- and Intrarater Reliability Using Different Software Versions of E4D Compare in Dental Education.

PubMed

Callan, Richard S; Cooper, Jeril R; Young, Nancy B; Mollica, Anthony G; Furness, Alan R; Looney, Stephen W

2015-06-01

The problems associated with intra- and interexaminer reliability when assessing preclinical performance continue to hinder dental educators' ability to provide accurate and meaningful feedback to students. Many studies have been conducted to evaluate the validity of utilizing various technologies to assist educators in achieving that goal. The purpose of this study was to compare two different versions of E4D Compare software to determine if either could be expected to deliver consistent and reliable comparative results, independent of the individual utilizing the technology. Five faculty members obtained E4D digital images of students' attempts (sample model) at ideal gold crown preparations for tooth #30 performed on typodont teeth. These images were compared to an ideal (master model) preparation utilizing two versions of E4D Compare software. The percent correlations between and within these faculty members were recorded and averaged. The intraclass correlation coefficient was used to measure both inter- and intrarater agreement among the examiners. The study found that using the older version of E4D Compare did not result in acceptable intra- or interrater agreement among the examiners. However, the newer version of E4D Compare, when combined with the Nevo scanner, resulted in a remarkable degree of agreement both between and within the examiners. These results suggest that consistent and reliable results can be expected when utilizing this technology under the protocol described in this study.

NASA Tech Briefs, September 2006

NASA Technical Reports Server (NTRS)

2006-01-01

Topics covered include: Improving Thermomechanical Properties of SiC/SiC Composites; Aerogel/Particle Composites for Thermoelectric Devices; Patches for Repairing Ceramics and Ceramic- Matrix Composites; Lower-Conductivity Ceramic Materials for Thermal-Barrier Coatings; An Alternative for Emergency Preemption of Traffic Lights; Vehicle Transponder for Preemption of Traffic Lights; Automated Announcements of Approaching Emergency Vehicles; Intersection Monitor for Traffic-Light-Preemption System; Full-Duplex Digital Communication on a Single Laser Beam; Stabilizing Microwave Frequency of a Photonic Oscillator; Microwave Oscillators Based on Nonlinear WGM Resonators; Pointing Reference Scheme for Free-Space Optical Communications Systems; High-Level Performance Modeling of SAR Systems; Spectral Analysis Tool 6.2 for Windows; Multi-Platform Avionics Simulator; Silicon-Based Optical Modulator with Ferroelectric Layer; Multiplexing Transducers Based on Tunnel-Diode Oscillators; Scheduling with Automated Resolution of Conflicts; Symbolic Constraint Maintenance Grid; Discerning Trends in Performance Across Multiple Events; Magnetic Field Solver; Computing for Aiming a Spaceborne Bistatic- Radar Transmitter; 4-Vinyl-1,3-Dioxolane-2-One as an Additive for Li-Ion Cells; Probabilistic Prediction of Lifetimes of Ceramic Parts; STRANAL-PMC Version 2.0; Micromechanics and Piezo Enhancements of HyperSizer; Single-Phase Rare-Earth Oxide/Aluminum Oxide Glasses; Tilt/Tip/Piston Manipulator with Base-Mounted Actuators; Measurement of Model Noise in a Hard-Wall Wind Tunnel; Loci-STREAM Version 0.9; The Synergistic Engineering Environment; Reconfigurable Software for Controlling Formation Flying; More About the Tetrahedral Unstructured Software System; Computing Flows Using Chimera and Unstructured Grids; Avoiding Obstructions in Aiming a High-Gain Antenna; Analyzing Aeroelastic Stability of a Tilt-Rotor Aircraft; Tracking Positions and Attitudes of Mars Rovers; Stochastic Evolutionary Algorithms for Planning Robot Paths; Compressible Flow Toolbox; Rapid Aeroelastic Analysis of Blade Flutter in Turbomachines; General Flow-Solver Code for Turbomachinery Applications; Code for Multiblock CFD and Heat-Transfer Computations; Rotating-Pump Design Code; Covering a Crucible with Metal Containing Channels; Repairing Fractured Bones by Use of Bioabsorbable Composites; Kalman Filter for Calibrating a Telescope Focal Plane; Electronic Absolute Cartesian Autocollimator; Fiber-Optic Gratings for Lidar Measurements of Water Vapor; Simulating Responses of Gravitational-Wave Instrumentation; SOFTC: A Software Correlator for VLBI; Progress in Computational Simulation of Earthquakes; Database of Properties of Meteors; Computing Spacecraft Solar-Cell Damage by Charged Particles; Thermal Model of a Current-Carrying Wire in a Vacuum; Program for Analyzing Flows in a Complex Network; Program Predicts Performance of Optical Parametric Oscillators; Processing TES Level-1B Data; Automated Camera Calibration; Tracking the Martian CO2 Polar Ice Caps in Infrared Images; Processing TES Level-2 Data; SmaggIce Version 1.8; Solving the Swath Segment Selection Problem; The Spatial Standard Observer; Less-Complex Method of Classifying MPSK; Improvement in Recursive Hierarchical Segmentation of Data; Using Heaps in Recursive Hierarchical Segmentation of Data; Tool for Statistical Analysis and Display of Landing Sites; Automated Assignment of Proposals to Reviewers; Array-Pattern-Match Compiler for Opportunistic Data Analysis; Pre-Processor for Compression of Multispectral Image Data; Compressing Image Data While Limiting the Effects of Data Losses; Flight Operations Analysis Tool; Improvement in Visual Target Tracking for a Mobile Robot; Software for Simulating Air Traffic; Automated Vectorization of Decision-Based Algorithms; Grayscale Optical Correlator Workbench; "One-Stop Shopping" for Ocean Remote-Sensing and Model Data; State Analysis Database Tool; Generating CAHV and CAHVOmages with Shadows in ROAMS; Improving UDP/IP Transmission Without Increasing Congestion; FORTRAN Versions of Reformulated HFGMC Codes; Program for Editing Spacecraft Command Sequences; Flight-Tested Prototype of BEAM Software; Mission Scenario Development Workbench; Marsviewer; Tool for Analysis and Reduction of Scientific Data; ASPEN Version 3.0; Secure Display of Space-Exploration Images; Digital Front End for Wide-Band VLBI Science Receiver; Multifunctional Tanks for Spacecraft; Lightweight, Segmented, Mostly Silicon Telescope Mirror; Assistant for Analyzing Tropical-Rain-Mapping Radar Data; and Anion-Intercalating Cathodes for High-Energy- Density Cells.

Unobtrusive Software and System Health Management with R2U2 on a Parallel MIMD Coprocessor

NASA Technical Reports Server (NTRS)

Schumann, Johann; Moosbrugger, Patrick

2017-01-01

Dynamic monitoring of software and system health of a complex cyber-physical system requires observers that continuously monitor variables of the embedded software in order to detect anomalies and reason about root causes. There exists a variety of techniques for code instrumentation, but instrumentation might change runtime behavior and could require costly software re-certification. In this paper, we present R2U2E, a novel realization of our real-time, Realizable, Responsive, and Unobtrusive Unit (R2U2). The R2U2E observers are executed in parallel on a dedicated 16-core EPIPHANY co-processor, thereby avoiding additional computational overhead to the system under observation. A DMA-based shared memory access architecture allows R2U2E to operate without any code instrumentation or program interference.

The analysis of the statistical and historical information gathered during the development of the Shuttle Orbiter Primary Flight Software

NASA Technical Reports Server (NTRS)

Simmons, D. B.; Marchbanks, M. P., Jr.; Quick, M. J.

1982-01-01

The results of an effort to thoroughly and objectively analyze the statistical and historical information gathered during the development of the Shuttle Orbiter Primary Flight Software are given. The particular areas of interest include cost of the software, reliability of the software, requirements for the software and how the requirements changed during development of the system. Data related to the current version of the software system produced some interesting results. Suggestions are made for the saving of additional data which will allow additional investigation.

Flight Software Development for the CHEOPS Instrument with the CORDET Framework

NASA Astrophysics Data System (ADS)

Cechticky, V.; Ottensamer, R.; Pasetti, A.

2015-09-01

CHEOPS is an ESA S-class mission dedicated to the precise measurement of radii of already known exoplanets using ultra-high precision photometry. The instrument flight software controlling the instrument and handling the science data is developed by the University of Vienna using the CORDET Framework offered by P&P Software GmbH. The CORDET Framework provides a generic software infrastructure for PUS-based applications. This paper describes how the framework is used for the CHEOPS application software to provide a consistent solution for to the communication and control services, event handling and FDIR procedures. This approach is innovative in four respects: (a) it is a true third-party reuse; (b) re-use is done at specification, validation and code level; (c) the re-usable assets and their qualification data package are entirely open-source; (d) re-use is based on call-back with the application developer providing functions which are called by the reusable architecture. File names missing from here on out (I tried to mimic the files names from before.)

Core Community Specifications for Electron Microprobe Operating Systems: Software, Quality Control, and Data Management Issues

NASA Technical Reports Server (NTRS)

Fournelle, John; Carpenter, Paul

2006-01-01

Modem electron microprobe systems have become increasingly sophisticated. These systems utilize either UNIX or PC computer systems for measurement, automation, and data reduction. These systems have undergone major improvements in processing, storage, display, and communications, due to increased capabilities of hardware and software. Instrument specifications are typically utilized at the time of purchase and concentrate on hardware performance. The microanalysis community includes analysts, researchers, software developers, and manufacturers, who could benefit from exchange of ideas and the ultimate development of core community specifications (CCS) for hardware and software components of microprobe instrumentation and operating systems.

75 FR 81157 - Version One Regional Reliability Standard for Transmission Operations

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-27

... processing software should be filed in native applications or print-to-PDF format and not in a scanned format..., Inc. v. FERC, 564 F.3d 1342 (D.C. Cir. 2009). \\3\\ NERC designates the version number of a Reliability...

Aviation Environmental Design Tool (AEDT) AEDT Standard Input File (ASIF) reference guide version 2a

DOT National Transportation Integrated Search

2014-01-01

The Federal Aviation Administration, Office of Environment and Energy (FAA-AEE) has developed the Aviation : Environmental Design Tool (AEDT) version 2a software system with the support of the following development team: : FAA, National Aeronautics a...

Aviation Environmental Design Tool (AEDT): Technical Manual Version 2b, Service Pack 2

DOT National Transportation Integrated Search

2016-05-01

The Federal Aviation Administration, Office of Environment and Energy (FAA-AEE) has developed the Aviation Environmental Design Tool (AEDT) version 2b software system with the support of the following development team: FAA, National Aeronautics and S...

Aviation Environmental Design Tool (AEDT): technical manual, version 2b, service pack 3

DOT National Transportation Integrated Search

2016-05-03

The Federal Aviation Administration, Office of Environment and Energy (FAA-AEE) has developed the Aviation Environmental Design Tool (AEDT) version 2b software system with the support of the following development team: FAA, National Aeronautics and S...

Analysis of Deformations of the Skylight Construction at the Main Hall of the Warsaw University of Technology

NASA Astrophysics Data System (ADS)

Odziemczyk, Waldemar

2015-02-01

The paper presents technology and results of measurements of the steel construction of the skylight of the Main Hall of the Warsaw University of Technology. The new version of the automated measuring system has been used for measurements. This system is based on Leica TCRP1201+ total station and the TCcalc1200 software application, developed by the author, which operates on a laptop computer connected with the total station by the wire. Two test measurements were performed. Each of them consisted of cyclic measurement using the polar method, from one station; points located on the skylight construction, as well as control points located on concrete, bearing poles, were successively measured. Besides geometrical values (such as Hz, V angles and the slope distance D), the changes of temperature and atmospheric pressure, were also recorded. Processed results of measurements contained information concerning the behaviour of the skylight; asymmetry of horizontal displacements with respect to the X axis have been proved. Changes of parameters of the instrument telescope and changes of the instrument orientation were also stated; they were connected with changes of the temperature. The most important results of works have been presented in the form of diagrams.

Automated control and data acquisition for a tunable diode laser heterodyne spectrometer

NASA Technical Reports Server (NTRS)

Shull, T. S.; Rinsland, P. L.

1983-01-01

This paper describes the hardware and software design, development, and implementation of the control and data electronics of a laser heterodyne spectrometer instrument being built at NASA Langley Research Center for a technology demonstration. Functional partitioning, applied at all levels of hardware and software, has been found to provide expedient design, development, and testing of the instrument. The instrument is composed of distributed microprocessor-based units. A master/slave protocol is presented which can be simulated by a terminal for unit checkout. All but one of the units are implemented using a set of core boards, plus unique boards where necessary. This design has led to reduced hardware development, reduced parts inventory, and replication of software modules, while providing the flexibility needed for a development instrument. The development tools and documentation guidelines are discussed.

Software Safety Progress in NASA

NASA Technical Reports Server (NTRS)

Radley, Charles F.

1995-01-01

NASA has developed guidelines for development and analysis of safety-critical software. These guidelines have been documented in a Guidebook for Safety Critical Software Development and Analysis. The guidelines represent a practical 'how to' approach, to assist software developers and safety analysts in cost effective methods for software safety. They provide guidance in the implementation of the recent NASA Software Safety Standard NSS-1740.13 which was released as 'Interim' version in June 1994, scheduled for formal adoption late 1995. This paper is a survey of the methods in general use, resulting in the NASA guidelines for safety critical software development and analysis.

Screening for bipolar disorder in adolescents with the mood disorder questionnaire-adolescent version (MDQ-A) and the child bipolar questionnaire (CBQ).

PubMed

Miguez, Melissa; Weber, Béatrice; Debbané, Martin; Balanzin, Dario; Gex-Fabry, Marianne; Raiola, Fulvia; Barbe, Rémy P; Vital Bennour, Marylène; Ansermet, François; Eliez, Stephan; Aubry, Jean-Michel

2013-08-01

Screening instruments for bipolar disorders (BDs) in children and adolescents have been developed recently. The present study examined performances of the French versions of the mood disorder questionnaire-adolescent version (MDQ-A) and child bipolar questionnaire (CBQ) in a sample of in- and outpatients. Seventy-six adolescents (age 13-18) and parents first completed the MDQ-A (adolescent and parent versions) and CBQ screening instruments. About 3 weeks later, they had a diagnostic interview with the Kiddie-schedule for affective disorders and schizophrenia-present and lifetime (K-SADS-PL), and the adolescent MDQ-A self-report was completed a second time. Eight of 76 patients (10.5%) met K-SADS-PL diagnostic criteria for BD. Test-retest reliability of the adolescent MDQ-A self-report was moderate (kappa = 0.66), whereas agreement between adolescent and parent reports was poor (kappa = 0.07). Sensitivity and specificity of the MDQ-A with respect to K-SADS-PL were 75.0% and 57.4% for the adolescent version, and 87.5% and 63.2% for the parent version. Corresponding figures were 50.0% and 73.5% for the CBQ. All three screening instruments had low positive predictive values (17.1% for the MDQ-A adolescent version; 21.9% for the MDQ-A parent version; 18.2% for the CBQ), whereas negative predictive values were higher than 90%. The present study points to modest performances of the MDQ-A and CBQ to detect BDs in adolescents, with diagnostic criteria for BD being unmet for a majority of patients who screened positive. © 2012 Wiley Publishing Asia Pty Ltd.

[Construct validity of a Portuguese version of the Female Sexual Function Index].

PubMed

Pacagnella, Rodolfo de Carvalho; Martinez, Edson Zangiacomi; Vieira, Elisabeth Meloni

2009-11-01

This study aimed to evaluate the construct validity of a version of the Female Sexual Function Index (FSFI). The version was inserted into a multidimensional questionnaire and applied face-to-face to 235 sterilized women. Non-response rate was 1.7%. The sample proved to be highly homogeneous, with low income and education. Cronbach's alpha of 0.948 indicated high internal consistency. Factor analysis showed that the instrument was measuring four factors: desire/arousal, lubrication, orgasm/satisfaction, and pain. This may reflect characteristics of the instrument itself, female sexual response, or even the sample's cultural peculiarities, which can affect understanding of the questions or concepts with which the instrument deals. This study emphasizes the need for further research in the general population to determine the psychometric properties of the FSFI, such as its factor composition and definition of appropriate cut-off points for the Brazilian population.

The Affective and Emotional Composite Temperament Scale (AFECTS): Psychometric properties of the Spanish version in a community sample from Mexico City and comparison between remitted psychiatric patients.

PubMed

Romo-Nava, Francisco; Fresán-Orellana, Ana; Barragán, Virginia; Saracco-Álvarez, Ricardo; Becerra-Palars, Claudia; Osorio, Yanik; Pérez, Emrys; Heinze, Gerhard; Lara, Diogo R

2015-02-01

AFECTS is a novel psychometric instrument that provides an integrated framework based on affective temperamental traits and their trait dimensions. It has the potential to be used in clinical and research fields to study psychopathology and mental health. It is now necessary to field-test this instrument with diverse populations and psychopathological entities. The primary aim was to test the construct validity and the internal consistency of the Spanish Version of the AFECTS instrument on Mexican subjects. AFECTS characteristics were then compared between general population and stable psychiatric patients. A cross-sectional design involving 350 subjects from the general population in México City and 91 stable patients with a bipolar disorder (BPD, n=20), major depressive disorder (MDD, n=35), or with a schizophrenia (n=36) diagnosis. A six-factor structure in trait dimensions, explaining 61.4% of the variance, with a Cronbach׳s alpha of 0.93 was found. Euthymic (23%) and hyperthymic (12%) affective temperaments were the most frequent, while dysphoric (3%) and apathetic (3%) were the least. Trait dimension differences were found in Volition, Sensitivity, and the Instability Index between the groups, particularly those with a bipolar disorder. Use of a self report instrument, and a small sample not representative of the Mexican population or patients with psychiatric conditions. The Spanish Version of the AFECTS instrument has adequate psychometric properties. This version of AFECTS will allow the use of this instrument among Spanish speaking populations and contribute to the continued research efforts on integrative models such as AFECT. Copyright © 2014 Elsevier B.V. All rights reserved.

Translation and cultural adaptation of a specific instrument for measuring asthma control and asthma status: the Asthma Control and Communication Instrument

PubMed Central

Tavares, Michelle Gonçalves de Souza; Brümmer, Carolina Finardi; Nicolau, Gabriela Valente; de Melo, José Tavares; Nazário, Nazaré Otilia; Steidle, Leila John Marques; Patino, Cecília Maria; Pizzichini, Marcia Margaret Menezes; Pizzichini, Emílio

2017-01-01

ABSTRACT Objective: To translate the Asthma Control and Communication Instrument (ACCI) to Portuguese and adapt it for use in Brazil. Methods: The ACCI was translated to Portuguese and adapted for use in Brazil in accordance with internationally accepted guidelines. The protocol included the following steps: permission and rights of use granted by the original author; translation of the ACCI from English to Portuguese; reconciliation; back-translation; review and harmonization of the back-translation; approval from the original author; review of the Portuguese version of the ACCI by an expert panel; cognitive debriefing (the clarity, understandability, and acceptability of the translated version being tested in a sample of the target population); and reconciliation and preparation of the final version. Results: During the cognitive debriefing process, 41 asthma patients meeting the inclusion criteria completed the ACCI and evaluated the clarity of the questions/statements. The clarity index for all ACCI items was > 0.9, meaning that all items were considered to be clear. Conclusions: The ACCI was successfully translated to Portuguese and culturally adapted for use in Brazil, the translated version maintaining the psychometric properties of the original version. The ACCI can be used in clinical practice because it is easy to understand and easily applied. PMID:29365000

Formation of thermal coagulum on multielectrode catheters during phased radiofrequency energy ablation of persistent atrial fibrillation.

PubMed

Debruyne, Philippe; Rossenbacker, Tom; Vankelecom, Bart; Charlier, Filip; Roosen, John; Ector, Bavo; Janssens, Luc

2014-02-01

Radiofrequency ablation (RFA) can unfavorably cause coagulum on the ablation electrode. The aim of this study was to assess this phenomenon on three different multielectrode catheters used to treat persistent atrial fibrillation with duty-cycled RFA. Twenty-six consecutive patients have been treated with the pulmonary vein ablation catheter (PVAC) and the multiarray ablation catheter (MAAC). In 13 patients, additional ablation with the multiarray septal catheter (MASC) has been performed. The multichannel RF generator GENius™ (Medtronic Inc., Minneapolis, MN, USA) independently delivered energy in a bipolar and unipolar mode (ratio of 4/1, 2/1, or 1/1) to any of the electrodes. Versions 14.2, 14.3, and 14.4 of the generator were used. Coagulum presence was determined postablation by careful visual inspection of the catheter electrodes. No coagulum formation was visualized on the PVACs. Coagulum formation was visualized in 59% of the electrodes of the MAACs using a 2/1 mode and the 14.2 software version versus 69% using the 14.4 version and a 2/1 mode (P = 0.7) versus 14% of the electrodes applying a 1/1 ratio and the 14.4 software version (P < 0.001). Duty-cycled RFA in 2/1 bipolar/unipolar ratio generates a substantial frequency of coagulum formation on the multielectrode catheters MAAC and MASC. The use of the 14.4 version of the software to drive the RF generator and the use of energy in the default 1/1 bipolar/unipolar ratio could significantly reduce the frequency of coagulum formation, but so far, could not completely overcome it. The PVAC did not form coagulum, regardless of generator version or energy ratio used. ©2013, The Authors. Journal compilation ©2013 Wiley Periodicals, Inc.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Werner, Mike

Why this utility? After years of upgrading the Java Runtime Environment (JRE) or the Java Software Development Kit (JDK/SDK), a Windows computer becomes littered with so many old versions that the machine may become a security risk due to exploits targeted at those older versions. This utility helps mitigate those vulnerabilities by searching for, and removing, versions 1.3.x thru 1.7.x of the Java JRE and/or JDK/SDK.

Annotated bibliography of software engineering laboratory literature

NASA Technical Reports Server (NTRS)

Kistler, David; Bristow, John; Smith, Don

1994-01-01

This document is an annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. Nearly 200 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials have been grouped into eight general subject areas for easy reference: (1) The Software Engineering Laboratory; (2) The Software Engineering Laboratory: Software Development Documents; (3) Software Tools; (4) Software Models; (5) Software Measurement; (6) Technology Evaluations; (7) Ada Technology; and (8) Data Collection. This document contains an index of these publications classified by individual author.

Experiments in fault tolerant software reliability

NASA Technical Reports Server (NTRS)

Mcallister, David F.; Tai, K. C.; Vouk, Mladen A.

1987-01-01

The reliability of voting was evaluated in a fault-tolerant software system for small output spaces. The effectiveness of the back-to-back testing process was investigated. Version 3.0 of the RSDIMU-ATS, a semi-automated test bed for certification testing of RSDIMU software, was prepared and distributed. Software reliability estimation methods based on non-random sampling are being studied. The investigation of existing fault-tolerance models was continued and formulation of new models was initiated.

Installing and Setting Up the Git Software Tool on OS X | High-Performance

Science.gov Websites

Computing | NREL the Git Software Tool on OS X Installing and Setting Up the Git Software Tool on OS X Learn how to install the Git software tool on OS X for use with the Peregrine system. You can . Binary Installer for OS X - Easiest! You can download the latest version of git from http://git-scm.com

Version control system of CAD documents and PLC projects

NASA Astrophysics Data System (ADS)

Khudyakov, P. Yu; Kisel’nikov, A. Yu; Startcev, I. M.; Kovalev, A. A.

2018-05-01

The paper presents the process of developing a version control system for CAD documents and PLC projects. The software was tested and the optimal composition of the modules was selected. The introduction of the system has made it possible to increase the safety and stability of the process control systems, as well as to reduce the number of conflicts for versions of CAD files. The number of incidents at the enterprise related to the use of incorrect versions of PLC projects is reduced to 0.

Thermo Scientific Sulfur Dioxide Analyzer Instrument Handbook

DOE Office of Scientific and Technical Information (OSTI.GOV)

Springston, S. R.

The Sulfur Dioxide Analyzer measures sulfur dioxide based on absorbance of UV light at one wavelength by SO2 molecules which then decay to a lower energy state by emitting UV light at a longer wavelength. Specifically, SO2 + hυ1 →SO2 *→SO2 + hυ2 The emitted light is proportional to the concentration of SO2 in the optical cell. External communication with the analyzer is available through an Ethernet port configured through the instrument network of the AOS systems. The Model 43i-TLE is part of the i-series of Thermo Scientific instruments. The i-series instruments are designed to interface with external computers throughmore » the proprietary Thermo Scientific iPort Software. However, this software is somewhat cumbersome and inflexible. BNL has written an interface program in National Instruments LabView that both controls the Model 43i-TLE Analyzer AND queries the unit for all measurement and housekeeping data. The LabView vi (the software program written by BNL) ingests all raw data from the instrument and outputs raw data files in a uniform data format similar to other instruments in the AOS and described more fully in Section 6.0 below.« less

Shipboard Analytical Capabilities on the Renovated JOIDES Resolution, IODP Riserless Drilling Vessel

NASA Astrophysics Data System (ADS)

Blum, P.; Foster, P.; Houpt, D.; Bennight, C.; Brandt, L.; Cobine, T.; Crawford, W.; Fackler, D.; Fujine, K.; Hastedt, M.; Hornbacher, D.; Mateo, Z.; Moortgat, E.; Vasilyev, M.; Vasilyeva, Y.; Zeliadt, S.; Zhao, J.

2008-12-01

The JOIDES Resolution (JR) has conducted 121 scientific drilling expeditions during the Ocean Drilling Program (ODP) and the first phase of the Integrated Ocean Drilling Program (IODP) (1983-2006). The vessel and scientific systems have just completed an NSF-sponsored renovation (2005-2008). Shipboard analytical systems have been upgraded, within funding constraints imposed by market driven vessel conversion cost increases, to include: (1) enhanced shipboard analytical services including instruments and software for sampling and the capture of chemistry, physical properties, and geological data; (2) new data management capabilities built around a laboratory information management system (LIMS), digital asset management system, and web services; (3) operations data services with enhanced access to navigation and rig instrumentation data; and (4) a combination of commercial and home-made user applications for workflow- specific data extractions, generic and customized data reporting, and data visualization within a shipboard production environment. The instrumented data capture systems include a new set of core loggers for rapid and non-destructive acquisition of images and other physical properties data from drill cores. Line-scan imaging and natural gamma ray loggers capture data at unprecedented quality due to new and innovative designs. Many instruments used to characterize chemical compounds of rocks, sediments, and interstitial fluids were upgraded with the latest technology. The shipboard analytical environment features a new and innovative framework (DESCinfo) and application (DESClogik) for capturing descriptive and interpretive data from geological sub-domains such as sedimentology, petrology, paleontology, structural geology, stratigraphy, etc. This system fills a long-standing gap by providing a global database, controlled vocabularies and taxa name lists with version control, a highly configurable spreadsheet environment for data capture, and visualization of context data collected with the shipboard core loggers and other instruments.

Field application of a multi-frequency acoustic instrument to monitor sediment for silt erosion study in Pelton turbine in Himalayan region, India

NASA Astrophysics Data System (ADS)

Rai, A. K.; Kumar, A.; Hies, T.; Nguyen, H. H.

2016-11-01

High sediment load passing through hydropower components erodes the hydraulic components resulting in loss of efficiency, interruptions in power production and downtime for repair/maintenance, especially in Himalayan regions. The size and concentration of sediment play a major role in silt erosion. The traditional process of collecting samples manually to analyse in laboratory cannot suffice the need of monitoring temporal variation in sediment properties. In this study, a multi-frequency acoustic instrument was applied at desilting chamber to monitor sediment size and concentration entering the turbine. The sediment size and concentration entering the turbine were also measured with manual samples collected twice daily. The samples collected manually were analysed in laboratory with a laser diffraction instrument for size and concentration apart from analysis by drying and filtering methods for concentration. A conductivity probe was used to calculate total dissolved solids, which was further used in results from drying method to calculate suspended solid content of the samples. The acoustic instrument was found to provide sediment concentration values similar to drying and filtering methods. However, no good match was found between mean grain size from the acoustic method with the current status of development and laser diffraction method in the first field application presented here. The future versions of the software and significant sensitivity improvements of the ultrasonic transducers are expected to increase the accuracy in the obtained results. As the instrument is able to capture the concentration and in the future most likely more accurate mean grain size of the suspended sediments, its application for monitoring silt erosion in hydropower plant shall be highly useful.

2MASS Catalog Server Kit Version 2.1

NASA Astrophysics Data System (ADS)

Yamauchi, C.

2013-10-01

The 2MASS Catalog Server Kit is open source software for use in easily constructing a high performance search server for important astronomical catalogs. This software utilizes the open source RDBMS PostgreSQL, therefore, any users can setup the database on their local computers by following step-by-step installation guide. The kit provides highly optimized stored functions for positional searchs similar to SDSS SkyServer. Together with these, the powerful SQL environment of PostgreSQL will meet various user's demands. We released 2MASS Catalog Server Kit version 2.1 in 2012 May, which supports the latest WISE All-Sky catalog (563,921,584 rows) and 9 major all-sky catalogs. Local databases are often indispensable for observatories with unstable or narrow-band networks or severe use, such as retrieving large numbers of records within a small period of time. This software is the best for such purposes, and increasing supported catalogs and improvements of version 2.1 can cover a wider range of applications including advanced calibration system, scientific studies using complicated SQL queries, etc. Official page: http://www.ir.isas.jaxa.jp/~cyamauch/2masskit/

Cross-cultural Adaptation of the Oral Anticoagulation Knowledge Test to the Brazilian Portuguese.

PubMed

Praxedes, Marcus Fernando da Silva; Abreu, Mauro Henrique Nogueira Guimarães; Ribeiro, Daniel Dias; Marcolino, Milena Soriano; Paiva, Saul Martins de; Martins, Maria Auxiliadora Parreiras

2017-05-01

Patients' knowledge about oral anticoagulant therapy may favor the achievement of therapeutic results and the prevention of adverse pharmacotherapy-related events. Brazil lacks validated instruments for assessing the patient's knowledge about treatment with warfarin. This study aimed to perform the cross-cultural adaptation of the Oral Anticoagulation Knowledge (OAK) Test instrument from English into Portuguese. This is a methodological study developed in an anticoagulation clinic of a public university hospital. The study included initial translation, synthesis of translations, back-translation, review by the experts committee and pre-testing with 30 individuals. We obtained semantic equivalence through the analysis of the referential and general meaning of each item. The conceptual equivalence of the items sought to demonstrate the relevance and acceptability of the instrument. The process of cross-cultural adaptation produced the final version of the OAK Test in Brazilian Portuguese entitled "Teste de Conhecimento sobre Anticoagulação Oral". There was a suitable semantic and conceptual equivalence between the adapted version and the original version, as well as an excellent acceptability of this instrument.

Cultural adaptation: translatability assessment and linguistic validation of the patient-reported outcome instrument for irritable bowel syndrome with diarrhea

PubMed Central

Delgado-Herrera, Leticia; Lasch, Kathryn; Popielnicki, Ana; Nishida, Akito; Arbuckle, Rob; Banderas, Benjamin; Zentner, Susan; Gagainis, Ingrid; Zeiher, Bernhardt

2016-01-01

Background and objective Following a 2009 US Food and Drug Administration guidance, a new patient-reported outcome (PRO) instrument was developed to support end points in multinational clinical trials assessing irritable bowel syndrome with diarrhea (IBS-D) symptom severity. Our objective was to assess the translatability of the IBS-D PRO instrument into ten languages, and subsequently perform a cultural adaptation/linguistic validation of the questionnaire into Japanese and US Spanish. Materials and methods Translatability assessments of the US English version of the IBS-D PRO were performed by experienced PRO translators who were native speakers of each target language and currently residing in target-language countries. Languages were Chinese (People’s Republic of China), Dutch (the Netherlands), French (Belgium), German (Germany), Japanese (Japan), Polish (Poland), Portuguese (Brazil), Russian (Russia), Spanish (Mexico), and Spanish (US). The project team assessed the instrument to identify potential linguistic and/or cultural adaptation issues. After the issues identified were resolved, the instrument was translated into Spanish (US) and Japanese through a process of two forward translations, one reconciled translation, and one backward translation. The project team reviewed the translated versions before the instruments were evaluated by cognitive debriefing interviews with samples of five Spanish (US) and five Japanese IBS-D patients. Results Linguistic and cultural adaptation concerns identified during the translatability assessment required minor revisions, mainly the presentation of dates/times and word structure. During the cognitive debriefing interviews, two of five Spanish respondents misunderstood the term “bowel movement” to mean only diarrhea in the Spanish version. Consequently, the term was changed from “movimiento intestinal” to “evacuaciones”. None of the Japanese respondents identified issues with the Japanese version. Conclusion The translatability of the IBS-D PRO instrument into ten target languages was confirmed, with only minor changes made to the translations of the instrument. The translation and linguistic validation into Spanish (US) and Japanese provide evidence that this instrument can be used in multinational trials and clinical settings. PMID:27382346

Coleman performs VO2 Max PFS Software Calibrations and Instrument Check

NASA Image and Video Library

2011-02-24

ISS026-E-029180 (24 Feb. 2011) --- NASA astronaut Catherine (Cady) Coleman, Expedition 26 flight engineer, performs VO2max portable Pulmonary Function System (PFS) software calibrations and instrument check while using the Cycle Ergometer with Vibration Isolation System (CEVIS) in the Destiny laboratory of the International Space Station.

The Paired Availability Design and Related Instrumental Variable Meta-analyses | Division of Cancer Prevention

Cancer.gov

Stuart G. Baker, 2017 Introduction This software computes meta-analysis and extrapolation estimates for an instrumental variable meta-analysis of randomized trial or before-and-after studies (the latter also known as the paired availability design). The software also checks on the assumptions if sufficient data are available. |

Development of an Aeromedical Scientific Information System for Aviation Safety

DTIC Science & Technology

2008-01-01

math- ematics, engineering, computer hardware, software , and networking, was assembled to glean the most knowledge from the complicated aeromedical...9, SPlus Enterprise Developer 8, and Insightful Miner version 7. Process flow charts were done with SmartDraw Suite Edition version 7. Static and

Transportation systems safety hazard analysis tool (SafetyHAT) user guide (version 1.0)

DOT National Transportation Integrated Search

2014-03-24

This is a user guide for the transportation system Safety Hazard Analysis Tool (SafetyHAT) Version 1.0. SafetyHAT is a software tool that facilitates System Theoretic Process Analysis (STPA.) This user guide provides instructions on how to download, ...

A generic testbed for the design of plasma spectrometer control software with application to the THOR-CSW solar wind instrument

NASA Astrophysics Data System (ADS)

De Keyser, Johan; Lavraud, Benoit; Neefs, Eddy; Berkenbosch, Sophie; Beeckman, Bram; Maggiolo, Romain; Gamby, Emmanuel; Fedorov, Andrei; Baruah, Rituparna; Wong, King-Wah; Amoros, Carine; Mathon, Romain; Génot, Vincent; Marcucci, Federica; Brienza, Daniele

2017-04-01

Modern plasma spectrometers require intelligent software that is able to exploit their capabilities to the fullest. While the low-level control of the instrument and basic tasks such as performing the basic measurement, temperature control, and production of housekeeping data are to be done by software that is executed on an FPGA and/or processor inside the instrument, higher level tasks such as control of measurement sequences, on-board moment calculation, beam tracking decisions, and data compression, may be performed by the instrument or in the payload data processing unit. Such design decisions, as well as an assessment of the workload on the different processing components, require early prototyping. We have developed a generic simulation testbed for the design of plasma spectrometer control software that allows an early evaluation of the level of resources that is needed at each level. Early prototyping can pinpoint bottlenecks in the design allowing timely remediation. We have applied this tool to the THOR Cold Solar Wind (CSW) plasma spectrometer. Some examples illustrating the usefulness of the tool are given.

STOPP/START version 2-development of software applications: easier said than done?

PubMed

Anrys, Pauline; Boland, Benoît; Degryse, Jean-Marie; De Lepeleire, Jan; Petrovic, Mirko; Marien, Sophie; Dalleur, Olivia; Strauven, Goedele; Foulon, Veerle; Spinewine, Anne

2016-09-01

Explicit criteria, such as the STOPP/START criteria, are increasingly used both in clinical practice and in research to identify potentially inappropriate prescribing in older people. In an article on the STOPP/START criteria version 2, O'Mahony et al have pointed out the advantages of developing computerised criteria. Both clinical decision support systems to support healthcare professionals and software applications to automatically detect inappropriate prescribing in research studies can be developed. In the process of developing such tools, difficulties may occur. In the context of a research study, we have developed an algorithm to automatically apply STOPP/START criteria version 2 to our research database. We comment in this paper on different kinds of difficulties encountered and make suggestions that could be taken into account when developing the next version of the criteria. © The Author 2016. Published by Oxford University Press on behalf of the British Geriatrics Society. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

New Web Server - the Java Version of Tempest - Produced

NASA Technical Reports Server (NTRS)

York, David W.; Ponyik, Joseph G.

2000-01-01

A new software design and development effort has produced a Java (Sun Microsystems, Inc.) version of the award-winning Tempest software (refs. 1 and 2). In 1999, the Embedded Web Technology (EWT) team received a prestigious R&D 100 Award for Tempest, Java Version. In this article, "Tempest" will refer to the Java version of Tempest, a World Wide Web server for desktop or embedded systems. Tempest was designed at the NASA Glenn Research Center at Lewis Field to run on any platform for which a Java Virtual Machine (JVM, Sun Microsystems, Inc.) exists. The JVM acts as a translator between the native code of the platform and the byte code of Tempest, which is compiled in Java. These byte code files are Java executables with a ".class" extension. Multiple byte code files can be zipped together as a "*.jar" file for more efficient transmission over the Internet. Today's popular browsers, such as Netscape (Netscape Communications Corporation) and Internet Explorer (Microsoft Corporation) have built-in Virtual Machines to display Java applets.

Testing in Service-Oriented Environments

DTIC Science & Technology

2010-03-01

software releases (versions, service packs, vulnerability patches) for one com- mon ESB during the 13-month period from January 1, 2008 through...impact on quality of service : Unlike traditional software compo- nents, a single instance of a web service can be used by multiple consumers. Since the...distributed, with heterogeneous hardware and software (SOA infrastructure, services , operating systems, and databases). Because of cost and security, it

Continuous integration and quality control for scientific software

NASA Astrophysics Data System (ADS)

Neidhardt, A.; Ettl, M.; Brisken, W.; Dassing, R.

2013-08-01

Modern software has to be stable, portable, fast and reliable. This is going to be also more and more important for scientific software. But this requires a sophisticated way to inspect, check and evaluate the quality of source code with a suitable, automated infrastructure. A centralized server with a software repository and a version control system is one essential part, to manage the code basis and to control the different development versions. While each project can be compiled separately, the whole code basis can also be compiled with one central “Makefile”. This is used to create automated, nightly builds. Additionally all sources are inspected automatically with static code analysis and inspection tools, which check well-none error situations, memory and resource leaks, performance issues, or style issues. In combination with an automatic documentation generator it is possible to create the developer documentation directly from the code and the inline comments. All reports and generated information are presented as HTML page on a Web server. Because this environment increased the stability and quality of the software of the Geodetic Observatory Wettzell tremendously, it is now also available for scientific communities. One regular customer is already the developer group of the DiFX software correlator project.

A Modern Automatic Chamber Technique as a Powerful Tool for CH4 and CO2 Flux Monitoring

NASA Astrophysics Data System (ADS)

Mastepanov, M.; Christensen, T. R.; Lund, M.; Pirk, N.

2014-12-01

A number of similar systems were used for monitoring of CH4 and CO2 exchange by the automatic chamber method in a range of different ecosystems. The measurements were carried out in northern Sweden (mountain birch forest near Abisko, 68°N, 2004-2010), southern Sweden (forest bog near Hässleholm, 56°N, 2007-2014), northeastern Greenland (arctic fen in Zackenberg valley, 74°N, 2005-2014), southwestern Greenland (fen near Nuuk, 64°N, 2007-2014), central Svalbard (arctic fen near Longyearbyen, 78°N, 2011-2014). Those in total 37 seasons of measurements delivered not only a large amount of valuable flux data, including a few novel findings (Mastepanov et al., Nature, 2008; Mastepanov et al., Biogeosciences, 2013), but also valuable experience with implementation of the automatic chamber technique using modern analytical instruments and computer technologies. A range of high resolution CH4 analysers (DLT-100, FMA, FGGA - Los Gatos Research), CO2 analyzers (EGM-4, SBA-4 - PP Systems; Li-820 - Li-Cor Biosciences), as well as Methane Carbon Isotope Analyzer (Los Gatos Research) has shown to be suitable for precise measurements of fluxes, from as low as 0.1 mg CH4 m-1 d-1 (wintertime measurements at Zackenberg, unpublished) to as high as 2.4 g CH4 m-1 d-1 (autumn burst 2007 at Zackenberg, Mastepanov et al., Nature, 2008). Some of these instruments had to be customized to accommodate 24/7 operation in harsh arctic conditions. In this presentation we will explain some of these customizations. High frequency of concentration measurements (1 Hz in most cases) provides a unique opportunity for quality control of flux calculations; on the other hand, this enormous amount of data can be analyzed only using highly automated algorithms. A specialized software package was developed and improved through the years of measurements and data processing. This software automates the data flow from raw concentration data of different instruments and sensors and various status records, through a single database with all recorded parameters, to a visualized flux calculation module, which suggests the optimized flux calculation while allowing for manual correction of all parameters. In this presentation we will communicate the most recent versions of this software package and demonstrate it with different kinds of sample data.

48 CFR 227.7207 - Contractor data repositories.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Computer Software and Computer Software Documentation 227.7207 Contractor data repositories. Follow 227.7108 when it is in the Government's interests to have a data repository include computer software or to have a separate computer software repository. Contractual instruments establishing the repository...

48 CFR 227.7207 - Contractor data repositories.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Computer Software and Computer Software Documentation 227.7207 Contractor data repositories. Follow 227.7108 when it is in the Government's interests to have a data repository include computer software or to have a separate computer software repository. Contractual instruments establishing the repository...

48 CFR 227.7207 - Contractor data repositories.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Computer Software and Computer Software Documentation 227.7207 Contractor data repositories. Follow 227.7108 when it is in the Government's interests to have a data repository include computer software or to have a separate computer software repository. Contractual instruments establishing the repository...

48 CFR 227.7207 - Contractor data repositories.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Computer Software and Computer Software Documentation 227.7207 Contractor data repositories. Follow 227.7108 when it is in the Government's interests to have a data repository include computer software or to have a separate computer software repository. Contractual instruments establishing the repository...

Performance and Evaluation of the Global Modeling and Assimilation Office Observing System Simulation Experiment

NASA Technical Reports Server (NTRS)

Prive, Nikki; Errico, R. M.; Carvalho, D.

2018-01-01

The National Aeronautics and Space Administration Global Modeling and Assimilation Office (NASA/GMAO) has spent more than a decade developing and implementing a global Observing System Simulation Experiment framework for use in evaluting both new observation types as well as the behavior of data assimilation systems. The NASA/GMAO OSSE has constantly evolved to relect changes in the Gridpoint Statistical Interpolation data assimiation system, the Global Earth Observing System model, version 5 (GEOS-5), and the real world observational network. Software and observational datasets for the GMAO OSSE are publicly available, along with a technical report. Substantial modifications have recently been made to the NASA/GMAO OSSE framework, including the character of synthetic observation errors, new instrument types, and more sophisticated atmospheric wind vectors. These improvements will be described, along with the overall performance of the current OSSE. Lessons learned from investigations into correlated errors and model error will be discussed.

Testing of the on-board attitude determination and control algorithms for SAMPEX

NASA Technical Reports Server (NTRS)

Mccullough, Jon D.; Flatley, Thomas W.; Henretty, Debra A.; Markley, F. Landis; San, Josephine K.

1993-01-01

Algorithms for on-board attitude determination and control of the Solar, Anomalous, and Magnetospheric Particle Explorer (SAMPEX) have been expanded to include a constant gain Kalman filter for the spacecraft angular momentum, pulse width modulation for the reaction wheel command, an algorithm to avoid pointing the Heavy Ion Large Telescope (HILT) instrument boresight along the spacecraft velocity vector, and the addition of digital sun sensor (DSS) failure detection logic. These improved algorithms were tested in a closed-loop environment for three orbit geometries, one with the sun perpendicular to the orbit plane, and two with the sun near the orbit plane - at Autumnal Equinox and at Winter Solstice. The closed-loop simulator was enhanced and used as a truth model for the control systems' performance evaluation and sensor/actuator contingency analysis. The simulations were performed on a VAX 8830 using a prototype version of the on-board software.

KAPAO first light: the design, construction and operation of a low-cost natural guide star adaptive optics system

NASA Astrophysics Data System (ADS)

Severson, Scott A.; Choi, Philip I.; Badham, Katherine E.; Bolger, Dalton; Contreras, Daniel S.; Gilbreth, Blaine N.; Guerrero, Christian; Littleton, Erik; Long, Joseph; McGonigle, Lorcan P.; Morrison, William A.; Ortega, Fernando; Rudy, Alex R.; Wong, Jonathan R.; Spjut, Erik; Baranec, Christoph; Riddle, Reed

2014-07-01

We present the instrument design and first light observations of KAPAO, a natural guide star adaptive optics (AO) system for the Pomona College Table Mountain Observatory (TMO) 1-meter telescope. The KAPAO system has dual science channels with visible and near-infrared cameras, a Shack-Hartmann wavefront sensor, and a commercially available 140-actuator MEMS deformable mirror. The pupil relays are two pairs of custom off-axis parabolas and the control system is based on a version of the Robo-AO control software. The AO system and telescope are remotely operable, and KAPAO is designed to share the Cassegrain focus with the existing TMO polarimeter. We discuss the extensive integration of undergraduate students in the program including the multiple senior theses/capstones and summer assistantships amongst our partner institutions. This material is based upon work supported by the National Science Foundation under Grant No. 0960343.

Identification of feline immunodeficiency virus subtype-B on St. Kitts, West Indies by quantitative PCR.

PubMed

Kelly, Patrick J; Stocking, Ruey; Gao, Dongya; Phillips, Nikol; Xu, Chuanling; Kaltenboeck, Bernhard; Wang, Chengming

2011-07-04

Although antibodies to the feline immunodeficiency virus (FIV) have been detected by SNAP assay in cats from St. Kitts, there have been no molecular studies to further confirm the infection and determine the FIV subtypes present. Total nucleic acids were extracted from EDTA whole blood specimens from 35 cats, followed by quantitative fluorescence resonance energy transfer (FRET) PCR under a six-channel LightCycler 2.0 Instrument with Software version 4.1. Four of 11 stray cats (36 %) but none of 24 owned cats were FIV positive by real-time PCR.  High-resolution melting curve analysis indicated that all four positive cats were infected with FIV subtype-B. This is the first molecular characterization of FIV subtypes on St. Kitts and the results confirm the high prevalence of FIV infection in stray cats on the island.

Instruments to assess the perception of physicians in the decision-making process of specific clinical encounters: a systematic review

PubMed Central

Légaré, France; Moher, David; Elwyn, Glyn; LeBlanc, Annie; Gravel, Karine

2007-01-01

Background The measurement of processes and outcomes that reflect the complexity of the decision-making process within specific clinical encounters is an important area of research to pursue. A systematic review was conducted to identify instruments that assess the perception physicians have of the decision-making process within specific clinical encounters. Methods For every year available up until April 2007, PubMed, PsycINFO, Current Contents, Dissertation Abstracts and Sociological Abstracts were searched for original studies in English or French. Reference lists from retrieved studies were also consulted. Studies were included if they reported a self-administered instrument evaluating physicians' perceptions of the decision-making process within specific clinical encounters, contained sufficient description to permit critical appraisal and presented quantitative results based on administering the instrument. Two individuals independently assessed the eligibility of the instruments and abstracted information on their conceptual underpinnings, main evaluation domain, development, format, reliability, validity and responsiveness. They also assessed the quality of the studies that reported on the development of the instruments with a modified version of STARD. Results Out of 3431 records identified and screened for evaluation, 26 potentially relevant instruments were assessed; 11 met the inclusion criteria. Five instruments were published before 1995. Among those published after 1995, five offered a corresponding patient version. Overall, the main evaluation domains were: satisfaction with the clinical encounter (n = 2), mutual understanding between health professional and patient (n = 2), mental workload (n = 1), frustration with the clinical encounter (n = 1), nurse-physician collaboration (n = 1), perceptions of communication competence (n = 2), degree of comfort with a decision (n = 1) and information on medication (n = 1). For most instruments (n = 10), some reliability and validity criteria were reported in French or English. Overall, the mean number of items on the modified version of STARD was 12.4 (range: 2 to 18). Conclusion This systematic review provides a critical appraisal and repository of instruments that assess the perception physicians have of the decision-making process within specific clinical encounters. More research is needed to pursue the validation of the existing instruments and the development of patient versions. This will help researchers capture the complexity of the decision-making process within specific clinical encounters. PMID:17937801

Resident Wellness and Social Support: Development and Cognitive Validation of a Resident Social Capital Assessment Tool.

PubMed

Kaplan, Stephen J; Seabott, Heather M; Cunningham, Erika B; Helman, James D; Calderon, Alvin; Thirlby, Richard C; Schenarts, Kimberly D

The purpose of this study is to develop and generate validity evidence for an instrument to measure social capital in residents. Mixed-methods, phased approach utilizing a modified Delphi technique, focus groups, and cognitive interviews. Four residency training institutions in Washington state between February 2016 and March 2017. General surgery, anesthesia, and internal medicine residents ranging from PGY-1 to PGY-6. The initial resident-focused instrument underwent revision via Delphi process with 6 experts; 100% expert consensus was achieved after 4 cycles. Three focus groups were conducted with 19 total residents. Focus groups identified 6 of 11 instrument items with mean quality ratings ≤4.0 on a 1-5 scale. The composite instrument rating of the draft version was 4.1 ± 0.5. After refining the instrument, cognitive interviews with the final version were completed with 22 residents. All items in the final version had quality ratings >4.0; the composite instrument rating was 4.8 ± 0.1. Social capital may be an important factor in resident wellness as residents rely upon each other and external social support to withstand fatigue, burnout, and other negative sequelae of rigorous training. This instrument for assessment of social capital in residents may provide an avenue for data collection and potentially, identification of residents at-risk for wellness degradation. Copyright © 2018 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

[Disabled person's satisfaction with health and social care--an internationally developed instrument].

PubMed

Kullmann, Lajos; Paulik, Edit

2011-02-01

Quality of health and social care is being assessed by largely different methods. Obtaining comparable and valuable data is difficult. Thus, internationally developed instruments have special value. A set of instruments has been developed simultaneously using World Health Organization's instrument development method. One of these is the instrument "Quality of Care and Support for People with Disabilities". Response scales contain five options for physically and three for intellectually disabled persons. Psychometric analysis of the Hungarian instrument version was based on interviews with 151 physically and 166 intellectually disabled persons. Answering rate was high, above 95% with the exception of one item. Internal consistency of the two instrument versions by Cronbach's alpha is 0.845 and 0.745 respectively. Lowest satisfaction was found in the domain "information" in both groups that correlates significantly with health conditions at p < 0.01 and p < 0.05 level respectively. The field trial confirms validity and reliability of the instrument. Its wider use may help the evaluation of satisfaction concerning different components of quality of care, consequently better tailoring of services to needs.

EOS MLS Level 2 Data Processing Software Version 3

NASA Technical Reports Server (NTRS)

Livesey, Nathaniel J.; VanSnyder, Livesey W.; Read, William G.; Schwartz, Michael J.; Lambert, Alyn; Santee, Michelle L.; Nguyen, Honghanh T.; Froidevaux, Lucien; wang, Shuhui; Manney, Gloria L.;

Adaptation and validation of the Spanish version of the Dieting Peer Competitiveness Scale to adolescents of both genders.

PubMed

Pamies-Aubalat, Lidia; Quiles-Marcos, Yolanda; Núñez-Núñez, Rosa M

2013-12-01

This study examined the Dieting Peer Competitiveness Scale; it is an instrument for evaluating this social comparison in young people. This instrumental study has two aims: The objective of the first aim was to present preliminary psychometric data from the Spanish version of the Dieting Peer Competitiveness Scale, including statistical item analysis, research about this instrument's internal structure, and a reliability analysis, from a sample of 1067 secondary school adolescents. The second objective of the study corresponds to confirmatory factor analysis of the scale's internal structure, as well as analysis for evidence of validity from a sample of 1075 adolescents.

Review and evaluation of methods for analyzing capacity at signalized intersections.

DOT National Transportation Integrated Search

1996-01-01

VDOT's current policy is to use and accept from others the 1994 Highway Capacity Manual (HCM) as the basis for capacity analysis on Virginia's streets and highways. VDOT uses the latest version of the Highway Capacity Software (HCS). Software program...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT; ENVIRONMENTAL DECISION SUPPORT SOFTWARE; ENVIRONMENTAL SOFTWARE SITEPRO VERSION 2.0"

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has created the Environmental Technology Verification Program (ETV) to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the...

Software engineering laboratory series: Annotated bibliography of software engineering laboratory literature

NASA Technical Reports Server (NTRS)

Morusiewicz, Linda; Valett, Jon

1992-01-01

This document is an annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. More than 100 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials have been grouped into eight general subject areas for easy reference: (1) the Software Engineering Laboratory; (2) the Software Engineering Laboratory: Software Development Documents; (3) Software Tools; (4) Software Models; (5) Software Measurement; (6) Technology Evaluations; (7) Ada Technology; and (8) Data Collection. This document contains an index of these publications classified by individual author.

Quality of life in multiple myeloma: clinical validation of the Mexican-Spanish version of the QLQ-MY20 instrument.

PubMed

Espinoza-Zamora, José Ramiro; Portilla-Espinosa, César Miguel; Labardini-Méndez, Juan Rafael; Cervera, Eduardo; Niesvisky, Ruben; Oñate-Ocaña, Luis F

2015-06-01

Health-related quality of life (HRQL) has become an important outcome measurement in hematology. Our aim was to validate the quality of life questionnaire (QLQ)-MY20 instrument in patients with multiple myeloma (MM) in Mexico. The Mexican-Spanish versions of the QLQ-C30 and QLQ-MY20 instruments were applied to patients with MM at a cancer referral centre. Reliability and validity tests were performed. Test-retest was carried out in selected patients. Ninety-eight patients with MM were included in this study. Questionnaire compliance rates were high, and the instrument was well accepted; internal consistency tests demonstrated good convergent and divergent validity. Cronbach's α coefficients of seven of nine multi-item scales of the QLQ-C30 and of all three multi-item scales of the QLQ-MY20 instruments were >0.7 (range, 0.36-0.89). The scales of the QLQ-C30 and QLQ-MY20 instruments distinguished among clinically distinct groups of patients; 9 of 15 scales of the QLQ-C30 and all 4 scales of the QLQ-MY20 presented responsiveness after change over time. The Mexican-Spanish version of the QLQ-MY20 questionnaire is reliable and valid for the assessment of HRQL in patients with MM and can be used in clinical trials in the Mexican community.

Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan. Part 1: ASC software quality engineering practices, Version 2.0.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sturtevant, Judith E.; Heaphy, Robert; Hodges, Ann Louise

2006-09-01

The purpose of the Sandia National Laboratories Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. The plan defines the ASC program software quality practices and provides mappings of these practices to Sandia Corporate Requirements CPR 1.3.2 and 1.3.6 and to a Department of Energy document, ASCI Software Quality Engineering: Goals, Principles, and Guidelines. This document also identifies ASC management and software project teams responsibilities in implementing the software quality practices and in assessing progress towards achieving their software quality goals.

Psychometric properties of the Finnish version of the Women's Health Questionnaire.

PubMed

Katainen, Riina E; Engblom, Janne R; Vahlberg, Tero J; Polo-Kantola, Päivi

2017-08-01

The Women's Health Questionnaire (WHQ) is a validated and commonly used instrument for measuring climacteric-related symptoms. A revised version was previously developed. However, validation in a Finnish population is lacking. As it is important to use qualified instruments, we performed a validation study of the WHQ in a Finnish population. In all, 3,421 women, aged 41 to 54 years, formed the study population. In the original 36-item WHQ, the items were rated on a 1 to 4 scale and on a binary scale (0-1). The scaling of the revised 23-item WHQ was 0 to 100. We evaluated the psychometric properties (internal consistency, correlations between the symptom domains, factor structure, and sampling adequacy) in all three versions. For the 1 to 4 scale and on the revised version of the WHQ, the internal consistency was acceptable (the Cronbach's α coefficients >0.70) for most of the domains. On the binary scale, the majority of the coefficient values were below the acceptable level. The original symptom domains, especially those on the revised version, were recognizable from the factors in the exploratory factor analysis, but there were some limitations. The Kaiser-Meyer-Olkin values were high. The WHQ is a valid instrument for measuring climacteric-related symptoms in Finnish middle-aged women. The psychometric properties of the revised 23-item WHQ were as good or even better than those of the original 36-item WHQ. Thus, we encourage use of the revised version.

Comparison of two methods for cardiac output measurement in critically ill patients.

PubMed

Saraceni, E; Rossi, S; Persona, P; Dan, M; Rizzi, S; Meroni, M; Ori, C

2011-05-01

The aim of recent haemodynamic monitoring has been to obtain continuous and reliable measures of cardiac output (CO) and indices of preload responsiveness. Many of these methods are based on the arterial pressure waveform analysis. The aim of our study was to assess the accuracy of CO measurements obtained by FloTrac/Vigileo, software version 1.07 and the new version 1.10 (Edwards Lifesciences LLC, Irvine, CA, USA), compared with CO measurements obtained by bolus thermodilution by pulmonary artery catheterization (PAC) in the intensive care setting. In 21 critically ill patients (enrolled in two University Hospitals), requiring invasive haemodynamic monitoring, PAC and FloTrac/Vigileo transducers connected to the arterial pressure line were placed. Simultaneous measurements of CO by two methods (FloTrac/Vigileo and thermodilution) were obtained three times a day for 3 consecutive days, when possible. The level of concordance between the two methods was assessed by the procedure suggested by Bland and Altman. One hundred and forty-one pairs of measurements (provided by thermodilution and by both 1.07 and 1.10 FloTrac/Vigileo versions) were obtained in 21 patients (seven of them were trauma patients) with a mean (sd) age of 59 (16) yr. The Pearson product moment coefficient was 0.62 (P<0.001). The bias was -0.18 litre min(-1). The limits of agreement were 4.54 and -4.90 litre min(-1), respectively. Our data show a poor level of concordance between measures provided by the two methods. We found an underestimation of CO values measured with the 1.07 software version of FloTrac for supranormal values of CO. The new software (1.10) has been improved in order to correct this bias; however, its reliability is still poor. On the basis of our data, we can therefore conclude that both software versions of FloTrac/Vigileo did not still provide reliable estimation of CO in our intensive care unit setting.

HPC Institutional Computing Project: W15_lesreactiveflow KIVA-hpFE Development: A Robust and Accurate Engine Modeling Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carrington, David Bradley; Waters, Jiajia

KIVA-hpFE is a high performance computer software for solving the physics of multi-species and multiphase turbulent reactive flow in complex geometries having immersed moving parts. The code is written in Fortran 90/95 and can be used on any computer platform with any popular complier. The code is in two versions, a serial version and a parallel version utilizing MPICH2 type Message Passing Interface (MPI or Intel MPI) for solving distributed domains. The parallel version is at least 30x faster than the serial version and much faster than our previous generation of parallel engine modeling software, by many factors. The 5thmore » generation algorithm construction is a Galerkin type Finite Element Method (FEM) solving conservative momentum, species, and energy transport equations along with two-equation turbulent model k-ω Reynolds Averaged Navier-Stokes (RANS) model and a Vreman type dynamic Large Eddy Simulation (LES) method. The LES method is capable modeling transitional flow from laminar to fully turbulent; therefore, this LES method does not require special hybrid or blending to walls. The FEM projection method also uses a Petrov-Galerkin (P-G) stabilization along with pressure stabilization. We employ hierarchical basis sets, constructed on the fly with enrichment in areas associated with relatively larger error as determined by error estimation methods. In addition, when not using the hp-adaptive module, the code employs Lagrangian basis or shape functions. The shape functions are constructed for hexahedral, prismatic and tetrahedral elements. The software is designed to solve many types of reactive flow problems, from burners to internal combustion engines and turbines. In addition, the formulation allows for direct integration of solid bodies (conjugate heat transfer), as in heat transfer through housings, parts, cylinders. It can also easily be extended to stress modeling of solids, used in fluid structure interactions problems, solidification, porous media modeling and magneto hydrodynamics.« less

SMP: A solid modeling program version 2.0

NASA Technical Reports Server (NTRS)

Randall, D. P.; Jones, K. H.; Vonofenheim, W. H.; Gates, R. L.; Matthews, C. G.

1986-01-01

The Solid Modeling Program (SMP) provides the capability to model complex solid objects through the composition of primitive geometric entities. In addition to the construction of solid models, SMP has extensive facilities for model editing, display, and analysis. The geometric model produced by the software system can be output in a format compatible with existing analysis programs such as PATRAN-G. The present version of the SMP software supports six primitives: boxes, cones, spheres, paraboloids, tori, and trusses. The details for creating each of the major primitive types is presented. The analysis capabilities of SMP, including interfaces to existing analysis programs, are discussed.

Software For Calibration Of Polarimetric SAR Data

NASA Technical Reports Server (NTRS)

Van Zyl, Jakob; Zebker, Howard; Freeman, Anthony; Holt, John; Dubois, Pascale; Chapman, Bruce

1994-01-01

POLCAL (Polarimetric Radar Calibration) software tool intended to assist in calibration of synthetic-aperture radar (SAR) systems. In particular, calibrates Stokes-matrix-format data produced as standard product by NASA/Jet Propulsion Laboratory (JPL) airborne imaging synthetic aperture radar (AIRSAR). Version 4.0 of POLCAL is upgrade of version 2.0. New options include automatic absolute calibration of 89/90 data, distributed-target analysis, calibration of nearby scenes with corner reflectors, altitude or roll-angle corrections, and calibration of errors introduced by known topography. Reduces crosstalk and corrects phase calibration without use of ground calibration equipment. Written in FORTRAN 77.

The Human Genome Project: Information access, management, and regulation. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

McInerney, J.D.; Micikas, L.B.

The Human Genome Project is a large, internationally coordinated effort in biological research directed at creating a detailed map of human DNA. This report describes the access of information, management, and regulation of the project. The project led to the development of an instructional module titled The Human Genome Project: Biology, Computers, and Privacy, designed for use in high school biology classes. The module consists of print materials and both Macintosh and Windows versions of related computer software-Appendix A contains a copy of the print materials and discs containing the two versions of the software.

Translation and cross-cultural adaptation of the Sexual Function Questionnaire (SFQ) into Brazilian Portuguese.

PubMed

Lapa, Clara de Oliveira; Rocha, Gibsi Possapp; Marques, Tiago Reis; Howes, Oliver; Smith, Shubulade; Monteiro, Ricardo Tavares; Zorzetti, Roberta; Spanemberg, Lucas

2017-01-01

Sexual dysfunction is common in patients with psychotic illness. This article describes the translation and cross-cultural adaptation of the Sexual Function Questionnaire (SFQ) into Brazilian Portuguese. The translation and cross-cultural adaptation followed the guidelines for adapting self-report instruments proposed by the Task Force of the International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Briefly, ISPOR steps include: preparation, forward translation, reconciliation, back-translation, back-translation review, harmonization, cognitive debriefing, review of cognitive debriefing and finalization, before proofreading and final version. The original authors authorized the translation and participated in the study. There was good agreement between translations and between the back-translation and the original English version of the SFQ. The final version was prepared with certificated evaluators in the original language and in Portuguese. Few changes were necessary to the new version in Portuguese. The translated and adapted Brazilian Portuguese version of the SFQ is reliable and semantically equivalent to the original version. Studies on psychotropic-related sexual dysfunction may now test the validity of the instrument and can investigate sexual dysfunction in Portuguese-speaking patients.

Translation and validation of the Life Satisfaction Index for Adolescents scale with neuromuscular disorders: LSI-A Brazil.

PubMed

Simon, Valdecir Antonio; Zanoteli, Edmar; Simon, Margarete Andreozzi Vaz Pereira; Resende, Maria Bernadete Dutra de; Reed, Umbertina Conti

2017-08-01

To validate the Life Satisfaction Index for Adolescents (LSI-A) scale, parent version and patient version, for Duchenne muscular dystrophy (DMD), spinal muscular atrophy (SMA) and limb-girdle muscular dystrophy (LGMD). The parent version of the instrument was divided into Groups A, B, C and D; and the patient version, divided into B, C and D. For the statistical calculation, the following tests were used: Cronbach's α, ICC, Pearson and the ROC Curve. The parent and patient versions of the instrument are presented, with the following results in the overall score, respectively: Cronbach's α, 0.87 and 0.89; reliability, r 0.98 and 0.97; reproducibility, ICC 0.69 and 0.80; sensitivity, 0.78 and 0.72; specificity, 0.5 and 0.69; and accuracy, 64% and 70.4%. According to the validity and reproducibility values, the LSI-A Brazil parent and patient versions, are clinically useful to assess quality of life in DMD, SMA or LGMD and may also be useful for other neuromuscular disorders.

Validation of the Persian Version of the Problematic Internet Use Questionnaire (PIUQ).

PubMed

Ranjbar, Hadi; Thatcher, Andrew; Greyling, Michael; Arab, Mansour; Nasri, Nahid

2014-10-01

The most commonly used instrument for the research and treatment of excessive internet use is Young's Internet Addiction Test (IAT). While the IAT has been translated to several languages (including Persian) and has demonstrated good psychometric properties across several independent studies, there is still a room for alternative assessment instruments. This study reports a validation of the Persian version of the Problematic Internet Use Questionnaire (PIUQ). A sample (n = 296) from Kerman, Iran was administered the translated Persian version of the PIUQ as well as the Persian version of the University of California, Los Angeles (UCLA) Loneliness scale, Satisfaction With Life scale, and questions related to use of technology and the internet. Analyses using confirmatory and exploratory factor analyses demonstrated that the Persian version of the PIUQ had good internal reliability and concurrent validity (with loneliness and satisfaction with life), but they also had an alternative factor structure that did not support the original factor structure. The Persian version of the PIUQ produced adequate psychometric properties (internal reliability and concurrent validity), but care should be taken in the interpretation of the factor structure.

Professionalism Mini-Evaluation Exercise in Finland: A preliminary investigation introducing the Finnish version of the P-MEX instrument.

PubMed

Karukivi, Max; Kortekangas-Savolainen, Outi; Saxén, Ulla; Haapasalo-Pesu, Kirsi-Maria

2015-10-01

Teaching medical professionalism is increasingly acknowledged as an important aspect of medical education. The Professionalism Mini-Evaluation Exercise (P-MEX) is an assessment tool for evaluating medical professionalism, but no studies using it as a self-assessment instrument have been reported. This paper reports on a preliminary investigation of the Finnish version of the P-MEX instrument as an assessment and self-assessment measure. The sample in the present cross-sectional study comprised all 23 medical students and recent graduates (15 females and 8 males) participating in a summer school of psychiatry program in 2014. The two-month program combines clinical work with multifaceted teaching and intensive tutoring. At the end of the program, the participants' medical professionalism was assessed by the tutors and other members of the work community as well as the students themselves using the Finnish version of the P-MEX instrument. The P-MEX scores were compared, using the Friedman test. The mean values and SD for the P-MEX assessments were as follows: tutor assessment 3.26±0.21, work community assessment 3.32±0.26 and self-assessment 3.01±0.07. No significant gender differences were observed. The tutor and work community assessments were significantly correlated (r=0.573, p=0.040), but the self-assessment scores did not correlate with either of the other assessments. Overall, the students evaluated their skills significantly poorer in comparison to the other assessments. Although the small sample size limits the generalization of these preliminary results, the Finnish version of the P-MEX instrument appears to be a feasible measure of medical professionalism. The instrument can also be used as a self-assessment instrument, but subjective evaluations should be complemented with external assessments or feedback in order to take individual and cultural aspects into account.

Psychometric Properties of the Greek Version of the Patient Dignity Inventory in Advanced Cancer Patients.

PubMed

Parpa, Efi; Kostopoulou, Sotiria; Tsilika, Eleni; Galanos, Antonis; Katsaragakis, Stylianos; Mystakidou, Kyriaki

2017-09-01

The patient dignity inventory (PDI) is an instrument to measure dignity distressing aspects at the end of life. The aims of the present study were the translation of the PDI in Greek language as well as to measure its psychometric aspects in a palliative care unit. A back-translation method was obtained at the Greek version. One hundred twenty advanced cancer patients completed the Greek version of the PDI, the Greek hospital anxiety and depression scale, the Greek schedule of attitudes toward hastened death (SAHD-Gr), and the Greek 12-item short form health survey. Confirmatory factor analysis failed to fit to the original instrument's structure and exploratory factor analysis was conducted revealing five factors ("Psychological Distress," "Body Image and Role Identity," "Self-Esteem," "Physical Distress and Dependency," and "Social Support"). The psychometric analysis of the PDI-Gr demonstrated a good concurrent validity, and the instrument discriminated well between subgroups of patients regarding age differences. Cronbach α were between 0.71 and 0.9 showing a good internal consistency. The Greek version of the PDI showed good psychometric properties in advanced cancer patients, supported the usefulness of the instrument assessing the sense of dignity distressing aspects of the terminally ill cancer patients. Copyright © 2017 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

The AAO fiber instrument data simulator

NASA Astrophysics Data System (ADS)

Goodwin, Michael; Farrell, Tony; Smedley, Scott; Heald, Ron; Heijmans, Jeroen; De Silva, Gayandhi; Carollo, Daniela

2012-09-01

The fiber instrument data simulator is an in-house software tool that simulates detector images of fiber-fed spectrographs developed by the Australian Astronomical Observatory (AAO). In addition to helping validate the instrument designs, the resulting simulated images are used to develop the required data reduction software. Example applications that have benefited from the tool usage are the HERMES and SAMI instrumental projects for the Anglo-Australian Telescope (AAT). Given the sophistication of these projects an end-to-end data simulator that accurately models the predicted detector images is required. The data simulator encompasses all aspects of the transmission and optical aberrations of the light path: from the science object, through the atmosphere, telescope, fibers, spectrograph and finally the camera detectors. The simulator runs under a Linux environment that uses pre-calculated information derived from ZEMAX models and processed data from MATLAB. In this paper, we discuss the aspects of the model, software, example simulations and verification.

Psychometric properties of the Greek version of Jacelon Attributed Dignity Scale.

PubMed

Papastavrou, Evridiki; Charitou, Paraskevi; Kouta, Christiana

2017-08-01

Maintaining dignity is important for successful aging, but there is lack of validated research instruments in the nursing literature to investigate dignity as perceived by the old people. This is a methodological study aiming to investigate the psychometric properties of the Greek version of Jacelon Attributed Dignity Scale as translated in the Greek language. A methodological approach consisting of translation, adaptation, and cross-cultural validation. A sample of 188 Greek-speaking old Cypriot persons drawn from the Hospital outpatient departments was asked to complete the Greek versions of Jacelon Attributed Dignity Scale and the Instrumental Activities of Daily Living. Data analyses included internal consistency reliability (Cronbach's alpha coefficient), item analysis, and exploratory factor analysis using principal component method with orthogonal varimax rotation. Ethical considerations: The study protocol was approved by the National Bioethics committee according to the national legislation. Permission to use the research instrument was granted from the author. Information about the aim and the benefits of the study was included in the information letter. Cronbach's alpha for Greek version of Jacelon Attributed Dignity Scale was 0.90. Four factors emerged explaining 65.28% of the total variance, and item to total correlation values ranged from 0.25 to 0.74 indicating high internal consistency and homogeneity. Mean item score in Instrumental Activities of Daily Living was 5.6 (standard deviation = 1.7) for men and 6.7 (standard deviation = 1.7) for women, and the correlations between demographics, Instrumental Activities of Daily Living, and the four factors of the Greek version of Jacelon Attributed Dignity Scale were low; also in multiple linear regression, the values of R 2 are presented low. Demographic characteristics and degree of functionality seem to be associated with some of the dimensions of dignity but with low correlations; therefore, they cannot predict attributed dignity. The Greek version of Jacelon Attributed Dignity Scale is a valid and reliable tool to measure attributed dignity in Greek-speaking older adults, but further testing of the psychometric properties and other potential factors that may affect the attributed dignity is needed.

Psychometric evaluation of the Environmental Reality Shock-Related Issues and Concerns instrument for newly graduated nurses.

PubMed

Kim, Eun-Young; Yeo, Jung Hee; Park, Hyunjeong; Sin, Kyung Mi; Jones, Cheryl B

2018-02-01

Reality shock is a critical representation of the gap between nursing education and clinical practice and it is important to explore the level of reality shock among nurses. However, there is no relevant instrument to assess the level of reality shock in South Korea. The purpose of this is to determine the validity and reliability of the Korean version of the Environmental Reality Shock-Related Issues and Concerns instrument. A cross-sectional study design was used in this study. The data collection was conducted in selected 15 hospitals in South Korea. A convenience sample of 216 newly graduated nurses participated in the study. The Korean version of the Environmental Reality Shock-Related Issues and Concerns instrument was developed through the forward-backward translation technique, and revision based on feedback from expert groups. The internal consistency reliability was assessed using Cronbach's alpha, and the construct validity was determined via exploratory and confirmatory factor analysis. The Korean version of the Environmental Reality Shock-Related Issues and Concerns has reliable internal consistency (Cronbach's alpha=0.91). Exploratory factor analysis revealed five factors including job, relationships, expectations, private life, and performance, which explained 61.92% of variance. The factor loadings ranged from 0.451 to 0.832. The five-factor structure was validated by confirmatory factor analysis (RMR<0.05, CFI>0.9). It was concluded that the Korean version of the Environmental Reality Shock-Related Issues and Concerns instrument has satisfactory construct validity and reliability to measure the reality shock of newly graduated nurses in South Korea. Copyright © 2017 Elsevier Ltd. All rights reserved.

Translation, cross-cultural adaptation to Brazilian- Portuguese and reliability analysis of the instrument Rapid Entire Body Assessment-REBA

PubMed Central

Lamarão, Andressa M.; Costa, Lucíola C. M.; Comper, Maria L. C.; Padula, Rosimeire S.

2014-01-01

Background: Observational instruments, such as the Rapid Entire Body Assessment, quickly assess biomechanical risks present in the workplace. However, in order to use these instruments, it is necessary to conduct the translational/cross-cultural adaptation of the instrument and test its measurement properties. Objectives: To perform the translation and the cross-cultural adaptation to Brazilian-Portuguese and test the reliability of the REBA instrument. Method: The procedures of translation and cross-cultural adaptation to Brazilian-Portuguese were conducted following proposed guidelines that involved translation, synthesis of translations, back translation, committee review and testing of the pre-final version. In addition, reliability and the intra- and inter-rater percent agreement were obtained with the Linear Weighted Kappa Coefficient that was associated with the 95% Confidence Interval and the cross tabulation 2×2. Results : The procedures for translation and adaptation were adequate and the necessary adjustments were conducted on the instrument. The intra- and inter-rater reliability showed values of 0.104 to 0.504, respectively, ranging from very poor to moderate. The percentage agreement values ranged from 5.66% to 69.81%. The percentage agreement was closer to 100% at the item 'upper arm' (69.81%) for the Intra-rater 1 and at the items 'legs' and 'upper arm' for the Intra-rater 2 (62.26%). Conclusions: The processes of translation and cross-cultural adaptation were conducted on the REBA instrument and the Brazilian version of the instrument was obtained. However, despite the reliability of the tests used to correct the translated and adapted version, the reliability values are unacceptable according to the guidelines standard, indicating that the reliability must be re-evaluated. Therefore, caution in the interpretation of the biomechanical risks measured by this instrument should be taken. PMID:25003273

Content Validity for the VVSymQ® Instrument: A New Patient-Reported Outcome Measure for the Assessment of Varicose Veins Symptoms.

PubMed

Paty, Jean; Elash, Celeste A; Turner-Bowker, Diane M

2017-02-01

Varicose veins are common and can impact patients' quality of life, but consensus regarding the evaluation of varicose vein symptoms is lacking and existing measures have limitations. This research aimed to develop and establish the content validity of a new electronic patient-reported outcome (PRO) measure, the VVSymQ ® instrument, to assess symptoms of superficial venous insufficiency (varicose veins) in clinical trials. The development of the VVSymQ ® instrument began with qualitative interviews with patients based on the symptom domain of the VEINES-QOL/Sym, an existing PRO instrument for chronic venous disorders of the leg. Three phases of qualitative research were conducted to examine the relevance and importance of the symptoms to patients with varicose veins, and the patients' ability to understand and use the VVSymQ ® instrument. The development included evaluating questions that had 1-week and 24-h recall periods, and paper and electronic versions of the new instrument. Five symptoms (heaviness, achiness, swelling, throbbing, and itching [HASTI™]) were consistently reported by patients across all sources of qualitative data. The final version of the VVSymQ ® instrument queries patients on the HASTI™ symptoms using a 24-h recall period and a 6-point duration-based response scale ranging from "None of the time" to "All of the time," and is administered daily via an electronic diary. Cognitive interviews demonstrated varicose vein patients' understanding of and their ability to use the final version of the VVSymQ ® instrument. Content validity was established for the VVSymQ ® instrument, which assesses the five HASTI™ symptoms of varicose veins daily via an electronic diary and has promise for use in research and practice.

Software for the EVLA

NASA Astrophysics Data System (ADS)

Butler, Bryan J.; van Moorsel, Gustaaf; Tody, Doug

2004-09-01

The Expanded Very Large Array (EVLA) project is the next generation instrument for high resolution long-millimeter to short-meter wavelength radio astronomy. It is currently funded by NSF, with completion scheduled for 2012. The EVLA will upgrade the VLA with new feeds, receivers, data transmission hardware, correlator, and a new software system to enable the instrument to achieve its full potential. This software includes both that required for controlling and monitoring the instrument and that involved with the scientific dataflow. We concentrate here on a portion of the dataflow software, including: proposal preparation, submission, and handling; observation preparation, scheduling, and remote monitoring; data archiving; and data post-processing, including both automated (pipeline) and manual processing. The primary goals of the software are: to maximize the scientific return of the EVLA; provide ease of use, for both novices and experts; exploit commonality amongst all NRAO telescopes where possible. This last point is both a bane and a blessing: we are not at liberty to do whatever we want in the software, but on the other hand we may borrow from other projects (notably ALMA and GBT) where appropriate. The software design methodology includes detailed initial use-cases and requirements from the scientists, intimate interaction between the scientists and the programmers during design and implementation, and a thorough testing and acceptance plan.

CEMENTITIOUS BARRIERS PARTNERSHIP FY13 MID-YEAR REPORT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burns, H.; Flach, G.; Langton, C.

2013-05-01

In FY2013, the Cementitious Barriers Partnership (CBP) is continuing in its effort to develop and enhance software tools demonstrating tangible progress toward fulfilling the objective of developing a set of tools to improve understanding and prediction of the long-term structural, hydraulic and chemical performance of cementitious barriers used in nuclear applications. In FY2012, the CBP released the initial inhouse “Beta-version” of the CBP Software Toolbox, a suite of software for simulating reactive transport in cementitious materials and important degradation phenomena. The current primary software components are LeachXS/ORCHESTRA, STADIUM, and a GoldSim interface for probabilistic analysis of selected degradation scenarios. THAMESmore » is a planned future CBP Toolbox component (FY13/14) focused on simulation of the microstructure of cementitious materials and calculation of resultant hydraulic and constituent mass transfer parameters needed in modeling. This past November, the CBP Software Toolbox Version 1.0 was released that supports analysis of external sulfate attack (including damage mechanics), carbonation, and primary constituent leaching. The LeachXS component embodies an extensive material property measurements database along with chemical speciation and reactive mass transport simulation cases with emphasis on leaching of major, trace and radionuclide constituents from cementitious materials used in DOE facilities, such as Saltstone (Savannah River) and Cast Stone (Hanford), tank closure grouts, and barrier concretes. STADIUM focuses on the physical and structural service life of materials and components based on chemical speciation and reactive mass transport of major cement constituents and aggressive species (e.g., chloride, sulfate, etc.). The CBP issued numerous reports and other documentation that accompanied the “Version 1.0” release including a CBP Software Toolbox User Guide and Installation Guide. These documents, as well as, the presentations from the CBP Software Toolbox Demonstration and User Workshop, which are briefly described below, can be accessed from the CBP webpage at http://cementbarriers.org/. The website was recently modified to describe the CBP Software Toolbox and includes an interest form for application to use the software. The CBP FY13 program is continuing research to improve and enhance the simulation tools as well as develop new tools that model other key degradation phenomena not addressed in Version 1.0. Also efforts to continue to verify the various simulation tools thru laboratory experiments and analysis of field specimens are ongoing to quantify and reduce the uncertainty associated with performance assessments are ongoing. This mid-year report also includes both a summary on the FY13 software accomplishments in addition to the release of Version 1.0 of the CBP Software Toolbox and the various experimental programs that are providing data for calibration and validation of the CBP developed software. The focus this year for experimental studies was to measure transport in cementitious material by utilization of a leaching method and reduction capacity of saltstone field samples. Results are being used to calibrate and validate the updated carbonation model.« less

Using a graphical programming language to write CAMAC/GPIB instrument drivers

NASA Technical Reports Server (NTRS)

Zambrana, Horacio; Johanson, William

1991-01-01

To reduce the complexities of conventional programming, graphical software was used in the development of instrumentation drivers. The graphical software provides a standard set of tools (graphical subroutines) which are sufficient to program the most sophisticated CAMAC/GPIB drivers. These tools were used and instrumentation drivers were successfully developed for operating CAMAC/GPIB hardware from two different manufacturers: LeCroy and DSP. The use of these tools is presented for programming a LeCroy A/D Waveform Analyzer.

Orbit Software Suite

NASA Technical Reports Server (NTRS)

Osgood, Cathy; Williams, Kevin; Gentry, Philip; Brownfield, Dana; Hallstrom, John; Stuit, Tim

2012-01-01

Orbit Software Suite is used to support a variety of NASA/DM (Dependable Multiprocessor) mission planning and analysis activities on the IPS (Intrusion Prevention System) platform. The suite of Orbit software tools (Orbit Design and Orbit Dynamics) resides on IPS/Linux workstations, and is used to perform mission design and analysis tasks corresponding to trajectory/ launch window, rendezvous, and proximity operations flight segments. A list of tools in Orbit Software Suite represents tool versions established during/after the Equipment Rehost-3 Project.

Aviation Environmental Design Tool (AEDT) : Uncertainty Quantification Supplemental Report : Version 2a Service Pack 2 (SP2)

DOT National Transportation Integrated Search

2014-05-01

The Federal Aviation Administration, Office of Environment and Energy (FAA-AEE) has developed the Aviation Environmental Design Tool (AEDT) version 2a software system with the support of the following development team: FAA, National Aeronautics and S...

AN OVERVIEW OF EPANET VERSION 3.0

EPA Science Inventory

EPANET is a widely used public domain software package for modeling the hydraulic and water quality behavior of water distribution systems over an extended period of time. The last major update to the code was version 2.0 released in 2000 (Rossman, 2000). Since that time there ha...

Aviation Environmental Design Tool (AEDT): Version 2c Service pack 1: AEDT Standard Input File (ASIF) Reference Guide

DOT National Transportation Integrated Search

2016-12-01

The Federal Aviation Administration, Office of Environment and Energy (FAA-AEE) has developed the Aviation Environmental Design Tool (AEDT) version 2c software system with the support of the following development team: FAA, National Aeronautics and S...

Mermaids - Mobile Earthquake Recording in Marine Areas by Independent Divers - to Mariscope.

NASA Astrophysics Data System (ADS)

Hello, Y.; Bonnieux, S.; Philippe, O.; Yegikyan, M.; Nolet, G.

2015-12-01

Mermaids are floating seismometers. The first generation used Argo floats developed for oceanographers to measure temperature and salinity. The Mermaids drift under water at about the speed of USArray and share with USArray the ability to cover a large surface. They record teleseismic P waves for events above magnitude 6.5 under noisy conditions (Indian Ocean), well below magnitude 6 under mild conditions (Mediterranean, Pacific). There are occasional recordings of PKP and PP waves. Local events can be seen down to magnitude 2. They are a perfect, low expensive and maintainable modern tool to fill the gap for monitoring the ocean. Ten mermaids have been launched May 2014 near the Galapagos to provide seismic information for deep tomography of the plume, whereas three of the Mermaids in the Mediterranean are currently being deployed/redeployed in the Ligurian Sea. These are the first launches with a purely scientific goal (as opposed to 8 earlier test deployments). Using the experience with the first fleet of prototypes, a new version is being developed. These are long-lived (five years), reach deeper (3000 m), multidisciplinary (up to eight instruments). The basic model also provides temperature and salinity data to facilitate co-financing with oceanography. In a more advanced version, it will be fully programmable by the scientist using them, and will have the ability to adapt software during missions using two-way satellite communication. If deployed in a dense array (e.g. rapid response) they obtain relative locations by sending out chirp signals between each other, surfacing from time to time for data transmission and to obtain a location and drift via GPS. They will have a "landing" capability to stay at location and monitor aftershocks while surfacing regularly for data transmission. For solo drifters, a magnetometer and a bathymetry sounder will assist in constraining the trajectory at depth.The first tests of seaworthiness of this second generation Mermaid have taken place, and a version for seismologists will be available early in 2016. Software development of the more advanced features is still under way.

The ISO SWS on-line system

NASA Technical Reports Server (NTRS)

Roelfsema, P. R.; Kester, D. J. M.; Wesselius, P. R.; Wieprech, E.; Sym, N.

1992-01-01

The software which is currently being developed for the Short Wavelength Spectrometer (SWS) of the Infrared Space Observatory (ISO) is described. The spectrometer has a wide range of capabilities in the 2-45 micron infrared band. SWS contains two independent gratings, one for the long and one for the short wavelength section of the band. With the gratings a spectral resolution of approximately 1000 to approximately 2500 can be obtained. The instrument also contains two Fabry-Perault's yielding a resolution between approximately 1000 and approximately 20000. Software is currently being developed for the acquisition, calibration, and analysis of SWS data. The software is firstly required to run in a pipeline mode without human interaction, to process data as they are received from the telescope. However, both for testing and calibration of the instrument as well as for evaluation of the planned operating procedures the software should also be suitable for interactive use. Thirdly the same software will be used for long term characterization of the instrument. The software must work properly within the environment designed by the European Space Agency (ESA) for the spacecraft operations. As a result strict constraints are put on I/O devices, throughput etc.