An overview of Space Communication Artificial Intelligence for Link Evaluation Terminal (SCAILET) Project

NASA Technical Reports Server (NTRS)

Shahidi, Anoosh K.; Schlegelmilch, Richard F.; Petrik, Edward J.; Walters, Jerry L.

1991-01-01

A software application to assist end-users of the link evaluation terminal (LET) for satellite communications is being developed. This software application incorporates artificial intelligence (AI) techniques and will be deployed as an interface to LET. The high burst rate (HBR) LET provides 30 GHz transmitting/20 GHz receiving (220/110 Mbps) capability for wideband communications technology experiments with the Advanced Communications Technology Satellite (ACTS). The HBR LET can monitor and evaluate the integrity of the HBR communications uplink and downlink to the ACTS satellite. The uplink HBR transmission is performed by bursting the bit-pattern as a modulated signal to the satellite. The HBR LET can determine the bit error rate (BER) under various atmospheric conditions by comparing the transmitted bit pattern with the received bit pattern. An algorithm for power augmentation will be applied to enhance the system's BER performance at reduced signal strength caused by adverse conditions.

Best Hiding Capacity Scheme for Variable Length Messages Using Particle Swarm Optimization

NASA Astrophysics Data System (ADS)

Bajaj, Ruchika; Bedi, Punam; Pal, S. K.

Steganography is an art of hiding information in such a way that prevents the detection of hidden messages. Besides security of data, the quantity of data that can be hidden in a single cover medium, is also very important. We present a secure data hiding scheme with high embedding capacity for messages of variable length based on Particle Swarm Optimization. This technique gives the best pixel positions in the cover image, which can be used to hide the secret data. In the proposed scheme, k bits of the secret message are substituted into k least significant bits of the image pixel, where k varies from 1 to 4 depending on the message length. The proposed scheme is tested and results compared with simple LSB substitution, uniform 4-bit LSB hiding (with PSO) for the test images Nature, Baboon, Lena and Kitty. The experimental study confirms that the proposed method achieves high data hiding capacity and maintains imperceptibility and minimizes the distortion between the cover image and the obtained stego image.

Reliability evaluation of CMOS RAMs

NASA Astrophysics Data System (ADS)

Salvo, C. J.; Sasaki, A. T.

The results of an evaluation of the reliability of a 1K x 1 bit CMOS RAM and a 4K x 1 bit CMOS RAM for the USAF are reported. The tests consisted of temperature cycling, thermal shock, electrical overstress-static discharge and accelerated life test cells. The study indicates that the devices have high reliability potential for military applications. Use-temperature failure rates at 100 C were 0.54 x 10 to the -5th failures/hour for the 1K RAM and 0.21 x 10 to the -5th failures/hour for the 4K RAM. Only minimal electrostatic discharge damage was noted in the devices when they were subjected to multiple pulses at 1000 Vdc, and redesign of the 7 Vdc quiescent parameter of the 4K RAM is expected to raise its field threshold voltage.

Superparamagnetic perpendicular magnetic tunnel junctions for true random number generators

NASA Astrophysics Data System (ADS)

Parks, Bradley; Bapna, Mukund; Igbokwe, Julianne; Almasi, Hamid; Wang, Weigang; Majetich, Sara A.

2018-05-01

Superparamagnetic perpendicular magnetic tunnel junctions are fabricated and analyzed for use in random number generators. Time-resolved resistance measurements are used as streams of bits in statistical tests for randomness. Voltage control of the thermal stability enables tuning the average speed of random bit generation up to 70 kHz in a 60 nm diameter device. In its most efficient operating mode, the device generates random bits at an energy cost of 600 fJ/bit. A narrow range of magnetic field tunes the probability of a given state from 0 to 1, offering a means of probabilistic computing.

On-orbit observations of single event upset in Harris HM-6508 1K RAMs, reissue A

NASA Astrophysics Data System (ADS)

Blake, J. B.; Mandel, R.

1987-02-01

The Harris HM-6508 1K x 1 RAMs are part of a subsystem of a satellite in a low, polar orbit. The memory module, used in the subsystem containing the RAMs, consists of three printed circuit cards, with each card containing eight 2K byte memory hybrids, for a total of 48K bytes. Each memory hybrid contains 16 HM-6508 RAM chips. On a regular basis all but 256 bytes of the 48K bytes are examined for bit errors. Two different techniques were used for detecting bit errors. The first technique, a memory check sum, was capable of automatically detecting all single bit and some double bit errors which occurred within a page of memory. A memory page consists of 256 bytes. Memory check sum tests are performed approximately every 90 minutes. To detect a multiple error or to determine the exact location of the bit error within the page the entire contents of the memory is dumped and compared to the load file. Memory dumps are normally performed once a month, or immediately after the check sum routine detects an error. Once the exact location of the error is found, the correct value is reloaded into memory. After the memory is reloaded, the contents of the memory location in question is verified in order to determine if the error was a soft error generated by an SEU or a hard error generated by a part failure or cosmic-ray induced latchup.

Critical issues regarding SEU in avionics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Normand, E.; McNulty, P.J.

1993-01-01

The energetic neutrons in the atmosphere cause microelectronics in avionic system to malfunction through a mechanism called single-event upsets (SEUs), and single-event latchup is a potential threat. Data from military and experimental flights as well as laboratory testing indicate that typical non-radiation-hardened 64K and 256K static random access memories (SRAMs) can experience a significant SEU rate at aircraft altitudes. Microelectronics in avionics systems have been demonstrated to be susceptible to SEU. Of all device types, RAMs are the most sensitive because they have the largest number of bits on a chip (e.g., an SRAM may have from 64K to 1Mmore » bits, a microprocessor 3K to 10K bits, and a logic device like an analog-to-digital converter, 12 bits). Avionics designers will need to take this susceptibility into account in current and future designs. A number of techniques are available for dealing with SEU: EDAC, redundancy, use of SEU-hard parts, reset and/or watchdog timer capability, etc. Specifications should be developed to guide avionics vendors in the analysis, prevention, and verification of neutron-induced SEU. Areas for additional research include better definition of the atmospheric neutrons and protons, development of better calculational models (e.g., those used for protons[sup 11]), and better characterization of neutron-induced latchup.« less

Test Review: L. Brown, R. J. Sherbenou, & S. K. Johnsen "Test of Nonverbal Intelligence-4" (Toni-4). Austin, TX--PRO-ED, 2010

ERIC Educational Resources Information Center

Ritter, Nicola; Kilinc, Emin; Navruz, Bilgin; Bae, Yunhee

2011-01-01

This article reviews Test of Nonverbal Intelligence-Fourth Edition (TONI-4), an individually administered instrument created to assess intelligence. The distinguishing characteristic of the TONI-4 is the nonverbal, motor-reduced format that assesses common elements of intelligence without the confounding effects of motor or linguistic skills. The…

Implementation of Integrated System Fault Management Capability

NASA Technical Reports Server (NTRS)

Figueroa, Fernando; Schmalzel, John; Morris, Jon; Smith, Harvey; Turowski, Mark

2008-01-01

Fault Management to support rocket engine test mission with highly reliable and accurate measurements; while improving availability and lifecycle costs. CORE ELEMENTS: Architecture, taxonomy, and ontology (ATO) for DIaK management. Intelligent Sensor Processes; Intelligent Element Processes; Intelligent Controllers; Intelligent Subsystem Processes; Intelligent System Processes; Intelligent Component Processes.

Space Communications Artificial Intelligence for Link Evaluation Terminal (SCAILET)

NASA Technical Reports Server (NTRS)

Shahidi, Anoosh

1991-01-01

A software application to assis end-users of the Link Evaluation Terminal (LET) for satellite communication is being developed. This software application incorporates artificial intelligence (AI) techniques and will be deployed as an interface to LET. The high burst rate (HBR) LET provides 30 GHz transmitting/20 GHz receiving, 220/110 Mbps capability for wideband communications technology experiments with the Advanced Communications Technology Satellite (ACTS). The HBR LET and ACTS are being developed at the NASA Lewis Research Center. The HBR LET can monitor and evaluate the integrity of the HBR communications uplink and downlink to the ACTS satellite. The uplink HBR transmission is performed by bursting the bit-pattern as a modulated signal to the satellite. By comparing the transmitted bit pattern with the received bit pattern, HBR LET can determine the bit error rate BER) under various atmospheric conditions. An algorithm for power augmentation is applied to enhance the system's BER performance at reduced signal strength caused by adverse conditions. Programming scripts, defined by the design engineer, set up the HBR LET terminal by programming subsystem devices through IEEE488 interfaces. However, the scripts are difficult to use, require a steep learning curve, are cryptic, and are hard to maintain. The combination of the learning curve and the complexities involved with editing the script files may discourage end-users from utilizing the full capabilities of the HBR LET system. An intelligent assistant component of SCAILET that addresses critical end-user needs in the programming of the HBR LET system as anticipated by its developers is described. A close look is taken at the various steps involved in writing ECM software for a C&P, computer and at how the intelligent assistant improves the HBR LET system and enhances the end-user's ability to perform the experiments.

Laboratory Equipment for Investigation of Coring Under Mars-like Conditions

NASA Astrophysics Data System (ADS)

Zacny, K.; Cooper, G.

2004-12-01

To develop a suitable drill bit and set of operating conditions for Mars sample coring applications, it is essential to make tests under conditions that match those of the mission. The goal of the laboratory test program was to determine the drilling performance of diamond-impregnated bits under simulated Martian conditions, particularly those of low pressure and low temperature in a carbon dioxide atmosphere. For this purpose, drilling tests were performed in a vacuum chamber kept at a pressure of 5 torr. Prior to drilling, a rock, soil or a clay sample was cooled down to minus 80 degrees Celsius (Zacny et al, 2004). Thus, all Martian conditions, except the low gravity were simulated in the controlled environment. Input drilling parameters of interest included the weight on bit and rotational speed. These two independent variables were controlled from a PC station. The dependent variables included the bit reaction torque, the depth of the bit inside the drilled hole and the temperatures at various positions inside the drilled sample, in the center of the core as it was being cut and at the bit itself. These were acquired every second by a data acquisition system. Additional information such as the rate of penetration and the drill power were calculated after the test was completed. The weight of the rock and the bit prior to and after the test were measured to aid in evaluating the bit performance. In addition, the water saturation of the rock was measured prior to the test. Finally, the bit was viewed under the Scanning Electron Microscope and the Stereo Optical Microscope. The extent of the bit wear and its salient features were captured photographically. The results revealed that drilling or coring under Martian conditions in a water saturated rock is different in many respects from drilling on Earth. This is mainly because the Martian atmospheric pressure is in the vicinity of the pressure at the triple point of water. Thus ice, heated by contact with the rotating bit, sublimed and released water vapor. The volumetric expansion of ice turning into a vapor was over 150 000 times. This continuously generated volume of gas effectively cleared the freeze-dried rock cuttings from the bottom of the hole. In addition, the subliming ice provided a powerful cooling effect that kept the bit cold and preserved the core in its original state. Keeping the rock core below freezing also reduced drastically the chances of cross contamination. To keep the bit cool in near vacuum conditions where convective cooling is poor, some intermittent stops would have to be made. Under virtually the same drilling conditions, coring under Martian low temperature and pressure conditions consumed only half the power while doubling the rate of penetration as compared to drilling under Earth atmospheric conditions. However, the rate of bit wear was much higher under Martian conditions (Zacny and Cooper, 2004) References Zacny, K. A., M. C. Quayle, and G. A. Cooper (2004), Laboratory drilling under Martian conditions yields unexpected results, J. Geophys. Res., 109, E07S16, doi:10.1029/2003JE002203. Zacny, K. A., and G. A. Cooper (2004), Investigation of diamond-impregnated drill bit wear while drilling under Earth and Mars conditions, J. Geophys. Res., 109, E07S10, doi:10.1029/2003JE002204. Acknowledgments The research supported by the NASA Astrobiology, Science and Technology Instrument Development (ASTID) program.

Short Note on Complexity of Multi-Value Byzantine Agreement

DTIC Science & Technology

2010-07-27

which lead to nBl /D bits over the whole algorithm. Broadcasts in extended step: In the extended step, every node broadcasts D bits. Thus nDB bits...bits, as: (n− 1)l + n(n− 1)(k +D/k)l/D + nBl /D + nDBt(t+ 1) (4) = (n− 1)l +O(n2kl/D + n2l/k + nBl /D + n3BD). (5) Notice that broadcast algorithm of

Independent transmission of sign language interpreter in DVB: assessment of image compression

NASA Astrophysics Data System (ADS)

Zatloukal, Petr; Bernas, Martin; Dvořák, LukáÅ.¡

2015-02-01

Sign language on television provides information to deaf that they cannot get from the audio content. If we consider the transmission of the sign language interpreter over an independent data stream, the aim is to ensure sufficient intelligibility and subjective image quality of the interpreter with minimum bit rate. The work deals with the ROI-based video compression of Czech sign language interpreter implemented to the x264 open source library. The results of this approach are verified in subjective tests with the deaf. They examine the intelligibility of sign language expressions containing minimal pairs for different levels of compression and various resolution of image with interpreter and evaluate the subjective quality of the final image for a good viewing experience.

Bits or Shots in Combat? The Generalized Deitchman Model of Guerrilla Warfare

DTIC Science & Technology

2013-08-13

fire; absence of intelligence leads to unaimed fire, dependent on targets’ density. We propose a new Lanchester -type model that mixes aimed and unaimed...military hardware. The idea of modeling the trade-off between firepower and intelligence in a Lanchester setting was first suggested by Schreiber [4...of intelligence leads to unaimed fire, dependent on targets? density. We propose a new Lanchester -type model that mixes aimed and unaimed fire, the

Developing a fluid intelligence scale through a combination of Rasch modeling and cognitive psychology.

PubMed

Primi, Ricardo

2014-09-01

Ability testing has been criticized because understanding of the construct being assessed is incomplete and because the testing has not yet been satisfactorily improved in accordance with new knowledge from cognitive psychology. This article contributes to the solution of this problem through the application of item response theory and Susan Embretson's cognitive design system for test development in the development of a fluid intelligence scale. This study is based on findings from cognitive psychology; instead of focusing on the development of a test, it focuses on the definition of a variable for the creation of a criterion-referenced measure for fluid intelligence. A geometric matrix item bank with 26 items was analyzed with data from 2,797 undergraduate students. The main result was a criterion-referenced scale that was based on information from item features that were linked to cognitive components, such as storage capacity, goal management, and abstraction; this information was used to create the descriptions of selected levels of a fluid intelligence scale. The scale proposed that the levels of fluid intelligence range from the ability to solve problems containing a limited number of bits of information with obvious relationships through the ability to solve problems that involve abstract relationships under conditions that are confounded with an information overload and distraction by mixed noise. This scale can be employed in future research to provide interpretations for the measurements of the cognitive processes mastered and the types of difficulty experienced by examinees. PsycINFO Database Record (c) 2014 APA, all rights reserved.

Investigation of system integration methods for bubble domain flight recorders

NASA Technical Reports Server (NTRS)

Chen, T. T.; Bohning, O. D.

1975-01-01

System integration methods for bubble domain flight records are investigated. Bubble memory module packaging and assembly, the control electronics design and construction, field coils, and permanent magnet bias structure design are studied. A small 60-k bit engineering model was built and tested to demonstrate the feasibility of the bubble recorder. Based on the various studies performed, a projection is made on a 50,000,000-bit prototype recorder. It is estimated that the recorder will occupy 190 cubic in., weigh 12 lb, and consume 12 w power when all of its four tracks are operated in parallel at 150 kHz data rate.

NbN A/D Conversion of IR Focal Plane Sensor Signal at 10 K

NASA Technical Reports Server (NTRS)

Eaton, L.; Durand, D.; Sandell, R.; Spargo, J.; Krabach, T.

1994-01-01

We are implementing a 12 bit SFQ counting ADC with parallel-to-serial readout using our established 10 K NbN capability. This circuit provides a key element of the analog signal processor (ASP) used in large infrared focal plane arrays. The circuit processes the signal data stream from a Si:As BIB detector array. A 10 mega samples per second (MSPS) pixel data stream flows from the chip at a 120 megabit bit rate in a format that is compatible with other superconductive time dependent processor (TDP) circuits being developed. We will discuss our planned ASP demonstration, the circuit design, and test results.

Single and Multi-Pulse Low-Energy Conical Theta Pinch Inductive Pulsed Plasma Thruster Performance

NASA Technical Reports Server (NTRS)

Hallock, Ashley K.; Martin, Adam; Polzin, Kurt; Kimberlin, Adam; Eskridge, Richard

2013-01-01

Fabricated and tested CTP IPPTs at cone angles of 20deg, 38deg, and 60deg, and performed direct single-pulse impulse bit measurements with continuous gas flow. Single pulse performance highest for 38deg angle with impulse bit of approx.1 mN-s for both argon and xenon. Estimated efficiencies low, but not unexpectedly so based on historical data trends and the direction of the force vector in the CTP. Capacitor charging system assembled to provide rapid recharging of capacitor bank, permitting repetition-rate operation. IPPT operated at repetition-rate of 5 Hz, at maximum average power of 2.5 kW, representing to our knowledge the highest average power for a repetitively-pulsed thruster. Average thrust in repetition-rate mode (at 5 kV, 75 sccm argon) was greater than simply multiplying the single-pulse impulse bit and the repetition rate.

The Single Event Upset (SEU) response to 590 MeV protons

NASA Technical Reports Server (NTRS)

Nichols, D. K.; Price, W. E.; Smith, L. S.; Soli, G. A.

1984-01-01

The presence of high-energy protons in cosmic rays, solar flares, and trapped radiation belts around Jupiter poses a threat to the Galileo project. Results of a test of 10 device types (including 1K RAM, 4-bit microP sequencer, 4-bit slice, 9-bit data register, 4-bit shift register, octal flip-flop, and 4-bit counter) exposed to 590 MeV protons at the Swiss Institute of Nuclear Research are presented to clarify the picture of SEU response to the high-energy proton environment of Jupiter. It is concluded that the data obtained should remove the concern that nuclear reaction products generated by protons external to the device can cause significant alteration in the device SEU response. The data also show only modest increases in SEU cross section as proton energies are increased up to the upper limits of energy for both the terrestrial and Jovian trapped proton belts.

Test program for 4-K memory card, JOLT microprocessor

NASA Technical Reports Server (NTRS)

Lilley, R. W.

1976-01-01

A memory test program is described for use with the JOLT microcomputer 4,096-word memory board used in development of an Omega navigation receiver. The program allows a quick test of the memory board by cycling the memory through all possible bit combinations in all words.

Situational Judgment Test Research: Informing the Debate on Practical Intelligence Theory

ERIC Educational Resources Information Center

McDaniel, Michael A.; Whetzel, Deborah L.

2005-01-01

[Gottfredson, L. S. (2003). Dissecting practical intelligence theory: Its claims and evidence. Intelligence, 31, 343-397.] provided a detailed critique of Sternberg's [Sternberg, R. J., Fotsythe, G. B., Hedlund, J., Horvath, J. A., Wagner, R. K., Williams, W. M., Snook, S. A., Grigorenko, E. L. (2000). Practical intelligence in everyday life. New…

Feasibility study of current pulse induced 2-bit/4-state multilevel programming in phase-change memory

NASA Astrophysics Data System (ADS)

Liu, Yan; Fan, Xi; Chen, Houpeng; Wang, Yueqing; Liu, Bo; Song, Zhitang; Feng, Songlin

2017-08-01

In this brief, multilevel data storage for phase-change memory (PCM) has attracted more attention in the memory market to implement high capacity memory system and reduce cost-per-bit. In this work, we present a universal programing method of SET stair-case current pulse in PCM cells, which can exploit the optimum programing scheme to achieve 2-bit/ 4state resistance-level with equal logarithm interval. SET stair-case waveform can be optimized by TCAD real time simulation to realize multilevel data storage efficiently in an arbitrary phase change material. Experimental results from 1 k-bit PCM test-chip have validated the proposed multilevel programing scheme. This multilevel programming scheme has improved the information storage density, robustness of resistance-level, energy efficient and avoiding process complexity.

Experimental test of Landauer’s principle in single-bit operations on nanomagnetic memory bits

PubMed Central

Hong, Jeongmin; Lambson, Brian; Dhuey, Scott; Bokor, Jeffrey

2016-01-01

Minimizing energy dissipation has emerged as the key challenge in continuing to scale the performance of digital computers. The question of whether there exists a fundamental lower limit to the energy required for digital operations is therefore of great interest. A well-known theoretical result put forward by Landauer states that any irreversible single-bit operation on a physical memory element in contact with a heat bath at a temperature T requires at least kBT ln(2) of heat be dissipated from the memory into the environment, where kB is the Boltzmann constant. We report an experimental investigation of the intrinsic energy loss of an adiabatic single-bit reset operation using nanoscale magnetic memory bits, by far the most ubiquitous digital storage technology in use today. Through sensitive, high-precision magnetometry measurements, we observed that the amount of dissipated energy in this process is consistent (within 2 SDs of experimental uncertainty) with the Landauer limit. This result reinforces the connection between “information thermodynamics” and physical systems and also provides a foundation for the development of practical information processing technologies that approach the fundamental limit of energy dissipation. The significance of the result includes insightful direction for future development of information technology. PMID:26998519

Blood pressure and cognitive function: a prospective analysis among adolescents in Seychelles.

PubMed

Lyngdoh, Tanica; Viswanathan, Bharathi; Kobrosly, Roni; van Wijngaarden, Edwin; Huber, Brittany; Davidson, Philip W; Cory-Slechta, Deborah A; Strain, John J; Strain, Sean; Myers, Gary J; Bovet, Pascal

2013-06-01

An inverse relationship between blood pressure (BP) and cognitive function has been found in adults, but limited data are available in adolescents and young adults. We examined the prospective relation between BP and cognitive function in adolescence. We examined the association between BP measured at the ages of 12-15 years in school surveys and cognitive endpoints measured in the Seychelles Child Development Study at ages 17 (n = 407) and 19 (n = 429) years, respectively. We evaluated multiple domains of cognition based on subtests of the Cambridge Neurological Test Automated Battery (CANTAB), the Woodcock Johnson Test of Scholastic Achievement (WJTA), the Finger Tapping test (FT) and the Kaufman Brief Intelligence Test (K-BIT). We used age, sex and height-specific z-scores of SBP, DBP and mean arterial pressure (MAP). Six out of the 21 cognitive endpoints tested were associated with BP. However, none of these associations were found to hold for both males and females or for different subtests within the same neurodevelopmental domain or for both SBP and DBP. Most of these associations disappeared when analyses were adjusted for selected potential confounding factors such as socio-economic status, birth weight, gestational age, BMI, alcohol consumption, blood glucose, and total n-3 and n-6 polyunsaturated fats. Our findings do not support a consistent association between BP and subsequent performance on tests assessing various cognitive domains in adolescents.

Single and Multi-Pulse Low-Energy Conical Theta Pinch Inductive Pulsed Plasma Thruster Performance

NASA Technical Reports Server (NTRS)

Hallock, A. K.; Martin, A. K.; Polzin, K. A.; Kimberlin, A. C.; Eskridge, R. H.

2013-01-01

Impulse bits produced by conical theta-pinch inductive pulsed plasma thrusters possessing cone angles of 20deg, 38deg, and 60deg, were quantified for 500J/pulse operation by direct measurement using a hanging-pendulum thrust stand. All three cone angles were tested in single-pulse mode, with the 38deg model producing the highest impulse bits at roughly 1 mN-s operating on both argon and xenon propellants. A capacitor charging system, assembled to support repetitively-pulsed thruster operation, permitted testing of the 38deg thruster at a repetition-rate of 5 Hz at power levels of 0.9, 1.6, and 2.5 kW. The average thrust measured during multiple-pulse operation exceeded the value obtained when the single-pulse impulse bit is multiplied by the repetition rate.

Second Report of the Multirate Processor (MRP) for Digital Voice Communications.

DTIC Science & Technology

1982-09-30

machine are: * two arithmetic logic units (ALUs)-one for data processing, and the other for address generation, * two memorys -6144 words (70 bits per word...of program memory , and 6094 words (16 bits per word) of data memory , q * input/output through modem and teletype, -15 .9 S-;. KANG AND FRANSEN Table...provides a measure of intelligibility and allows one to evaluate the discriminability of six distinctive features: voicing, nasality, sustention

NCU-SWIP Space Weather Instrumentation Payload - Intelligent Sensors On Efficient Real-Time Distributed LUTOS

NASA Astrophysics Data System (ADS)

Yeh, Tse-Liang; Dmitriev, Alexei; Chu, Yen-Hsyang; Jiang, Shyh-Biau; Chen, Li-Wu

The NCU-SWIP - Space Weather Instrumentation Payload is developed for simultaneous in-situ and remote measurement of space weather parameters for cross verifications. The measurements include in-situ electron density, electron temperature, magnetic field, the deceleration of satellite due to neutral wind, and remotely the linear cumulative intensities of oxygen ion air-glows at 135.6nm and 630.0nm along the flight path in forward, nader, and backward directions for tomographic reconstruction of the electron density distribution underneath. This instrument package is suitable for micro satellite constellation to establish nominal space weather profiles and, thus, to detect abnormal variations as the signs of ionospheric disturbances induced by severe atmospheric weather, or earth quake - mantle movement through their Lithosphere-Atmosphere-Ionosphere Coupling Mechanism. NCU-SWIP is constructed with intelligent sensor modules connected by common bus with their functionalities managed by an efficient distributed real-time system LUTOS. The same hierarchy can be applied to the level of satellite constellation. For example SWIP's in a constellation in coordination with the GNSS Occultation Experiment TriG planned for the Formosa-7 constellation, data can be cross correlated for verification and refinement for real-time, stable and reliable measurements. A SWIP will be contributed to the construction of a MAI Micro Satellite for verification. The SWIP consists of two separate modules: the SWIP main control module and the SWIP-PMTomo sensor module. They are respectively a 1.5kg W120xL120xH100 (in mm) box with forward facing 120mmPhi circular disk probe on a boom top edged at 470mm height and a 7.2kg W126xL590x372H (in mm) slab containing 3 legs looking downwards along the flight path, while consuming the maximum electricity of 10W and 12W. The sensors are 1) ETPEDP measuring 16bits floating potentials for electron temperature range of 1000K to 3000K and 24bits electron current for electron density range of 10 ({(10) to 12)}/cm (3) ; 2) PMTomo counting air glow photons up to 24bits after a pre-scalar of 10 with dwelling time of 30ns and effective maximum capacity of 3.3e7 counts/s and efficiency of 3e5 counts/s/pw, 3) 3D magnetometers, an internal MRM and an external MRMx behind the ETPEDP probe, measuring +,-2 Gauss in 16bits and 24bits resolutions respectively; and 4) G_G measuring 3D acceleration +,-2g and gyroscopic rate +,-2000deg/s in 16bits. In the nominal mode, SWIP interleaves sensor module data sampling triggers for minimum mutual interferences and at 1Hz cycle of two 0.5sec phases whence sampled once in each phase are MRM, MRMx, ETPEDP in ETP and EDP mode alternatively. Also are sampled PMTomo and G_G once a 1Hz cycle. This batch data throughput is 1.24MB/hr. In addition, magnetometer burst mode of 40Hz or 100Hz can be turned on by command with additional through put of 2.6MB/hr or 6.3MB/hr respectively for special event profiling.

Experiments with microcomputer-based artificial intelligence environments

USGS Publications Warehouse

Summers, E.G.; MacDonald, R.A.

1988-01-01

The U.S. Geological Survey (USGS) has been experimenting with the use of relatively inexpensive microcomputers as artificial intelligence (AI) development environments. Several AI languages are available that perform fairly well on desk-top personal computers, as are low-to-medium cost expert system packages. Although performance of these systems is respectable, their speed and capacity limitations are questionable for serious earth science applications foreseen by the USGS. The most capable artificial intelligence applications currently are concentrated on what is known as the "artificial intelligence computer," and include Xerox D-series, Tektronix 4400 series, Symbolics 3600, VAX, LMI, and Texas Instruments Explorer. The artificial intelligence computer runs expert system shells and Lisp, Prolog, and Smalltalk programming languages. However, these AI environments are expensive. Recently, inexpensive 32-bit hardware has become available for the IBM/AT microcomputer. USGS has acquired and recently completed Beta-testing of the Gold Hill Systems 80386 Hummingboard, which runs Common Lisp on an IBM/AT microcomputer. Hummingboard appears to have the potential to overcome many of the speed/capacity limitations observed with AI-applications on standard personal computers. USGS is a Beta-test site for the Gold Hill Systems GoldWorks expert system. GoldWorks combines some high-end expert system shell capabilities in a medium-cost package. This shell is developed in Common Lisp, runs on the 80386 Hummingboard, and provides some expert system features formerly available only on AI-computers including frame and rule-based reasoning, on-line tutorial, multiple inheritance, and object-programming. ?? 1988 International Association for Mathematical Geology.

Advanced microprocessor based power protection system using artificial neural network techniques

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Z.; Kalam, A.; Zayegh, A.

This paper describes an intelligent embedded microprocessor based system for fault classification in power system protection system using advanced 32-bit microprocessor technology. The paper demonstrates the development of protective relay to provide overcurrent protection schemes for fault detection. It also describes a method for power fault classification in three-phase system based on the use of neural network technology. The proposed design is implemented and tested on a single line three phase power system in power laboratory. Both the hardware and software development are described in detail.

Tethered Forth system for FPGA applications

NASA Astrophysics Data System (ADS)

Goździkowski, Paweł; Zabołotny, Wojciech M.

2013-10-01

This paper presents the tethered Forth system dedicated for testing and debugging of FPGA based electronic systems. Use of the Forth language allows to interactively develop and run complex testing or debugging routines. The solution is based on a small, 16-bit soft core CPU, used to implement the Forth Virtual Machine. Thanks to the use of the tethered Forth model it is possible to minimize usage of the internal RAM memory in the FPGA. The function of the intelligent terminal, which is an essential part of the tethered Forth system, may be fulfilled by the standard PC computer or by the smartphone. System is implemented in Python (the software for intelligent terminal), and in VHDL (the IP core for FPGA), so it can be easily ported to different hardware platforms. The connection between the terminal and FPGA may be established and disconnected many times without disturbing the state of the FPGA based system. The presented system has been verified in the hardware, and may be used as a tool for debugging, testing and even implementing of control algorithms for FPGA based systems.

Blood pressure and cognitive function: a prospective analysis among adolescents in the Seychelles

PubMed Central

Lyngdoh, Tanica; Viswanathan, Bharathi; Kobrosly, Roni; van Wijngaarden, Edwin; Huber, Brittany; Davidson, Philip W.; Cory-Slechta, Deborah A.; Strain, JJ; Myers, Gary J.; Bovet, Pascal

2013-01-01

Objective An inverse relationship between blood pressure and cognitive function has been found in adults, but limited data are available in adolescents and young adults. We examined the prospective relation between blood pressure and cognitive function in adolescence. Methods We examined the association between BP measured at the ages of 12–15 years in school surveys and cognitive endpoints measured in the Seychelles Child Development Study at ages 17 (n=407) and 19 (n=429) years, respectively. We evaluated multiple domains of cognition based on subtests of the Cambridge Neurological Test Automated Battery (CANTAB), the Woodcock Johnson Test of Scholastic Achievement (WJTA), the Finger Tapping test (FT) and the Kaufman Brief Intelligence Test (K-BIT). We used age-, sex- and height-specific z-scores of systolic blood pressure (SBP), diastolic blood pressure (DBP) and mean arterial pressure (MAP). Results Six out of the 21 cognitive endpoints tested were associated with BP. However, none of these associations were found to hold for both males and females or for different subtests within the same neurodevelopmental domain or for both SBP and DBP. Most of these associations disappeared when analyses were adjusted for selected potential confounding factors such as socio-economic status, birth weight, gestational age, body mass index, alcohol consumption, blood glucose, and total n-3 and n-6 polyunsaturated fats. Conclusions Our findings do not support a consistent association between BP and subsequent performance on tests assessing various cognitive domains in adolescents. PMID:23572201

A thin-film microprocessor with inkjet print-programmable memory

NASA Astrophysics Data System (ADS)

Myny, Kris; Smout, Steve; Rockelé, Maarten; Bhoolokam, Ajay; Ke, Tung Huei; Steudel, Soeren; Cobb, Brian; Gulati, Aashini; Rodriguez, Francisco Gonzalez; Obata, Koji; Marinkovic, Marko; Pham, Duy-Vu; Hoppe, Arne; Gelinck, Gerwin H.; Genoe, Jan; Dehaene, Wim; Heremans, Paul

2014-12-01

The Internet of Things is driving extensive efforts to develop intelligent everyday objects. This requires seamless integration of relatively simple electronics, for example through `stick-on' electronics labels. We believe the future evolution of this technology will be governed by Wright's Law, which was first proposed in 1936 and states that the cost of a product decreases with cumulative production. This implies that a generic electronic device that can be tailored for application-specific requirements during downstream integration would be a cornerstone in the development of the Internet of Things. We present an 8-bit thin-film microprocessor with a write-once, read-many (WORM) instruction generator that can be programmed after manufacture via inkjet printing. The processor combines organic p-type and soluble oxide n-type thin-film transistors in a new flavor of the familiar complementary transistor technology with the potential to be manufactured on a very thin polyimide film, enabling low-cost flexible electronics. It operates at 6.5 V and reaches clock frequencies up to 2.1 kHz. An instruction set of 16 code lines, each line providing a 9 bit instruction, is defined by means of inkjet printing of conductive silver inks.

A wide bandwidth CCD buffer memory system

NASA Technical Reports Server (NTRS)

Siemens, K.; Wallace, R. W.; Robinson, C. R.

1978-01-01

A prototype system was implemented to demonstrate that CCD's can be applied advantageously to the problem of low power digital storage and particularly to the problem of interfacing widely varying data rates. CCD shift register memories (8K bit) were used to construct a feasibility model 128 K-bit buffer memory system. Serial data that can have rates between 150 kHz and 4.0 MHz can be stored in 4K-bit, randomly-accessible memory blocks. Peak power dissipation during a data transfer is less than 7 W, while idle power is approximately 5.4 W. The system features automatic data input synchronization with the recirculating CCD memory block start address. System expansion to accommodate parallel inputs or a greater number of memory blocks can be performed in a modular fashion. Since the control logic does not increase proportionally to increase in memory capacity, the power requirements per bit of storage can be reduced significantly in a larger system.

SEMICONDUCTOR INTEGRATED CIRCUITS A 10-bit 200-kS/s SAR ADC IP core for a touch screen SoC

NASA Astrophysics Data System (ADS)

Xingyuan, Tong; Yintang, Yang; Zhangming, Zhu; Wenfang, Sheng

2010-10-01

Based on a 5 MSBs (most-significant-bits)-plus-5 LSBs (least-significant-bits) C-R hybrid D/A conversion and low-offset pseudo-differential comparison approach, with capacitor array axially symmetric layout topology and resistor string low gradient mismatch placement method, an 8-channel 10-bit 200-kS/s SAR ADC (successive-approximation-register analog-to-digital converter) IP core for a touch screen SoC (system-on-chip) is implemented in a 0.18 μm 1P5M CMOS logic process. Design considerations for the touch screen SAR ADC are included. With a 1.8 V power supply, the DNL (differential non-linearity) and INL (integral non-linearity) of this converter are measured to be about 0.32 LSB and 0.81 LSB respectively. With an input frequency of 91 kHz at 200-kS/s sampling rate, the spurious-free dynamic range and effective-number-of-bits are measured to be 63.2 dB and 9.15 bits respectively, and the power is about 136 μW. This converter occupies an area of about 0.08 mm2. The design results show that it is very suitable for touch screen SoC applications.

A 640-MHz 32-megachannel real-time polyphase-FFT spectrum analyzer

NASA Technical Reports Server (NTRS)

Zimmerman, G. A.; Garyantes, M. F.; Grimm, M. J.; Charny, B.

1991-01-01

A polyphase fast Fourier transform (FFT) spectrum analyzer being designed for NASA's Search for Extraterrestrial Intelligence (SETI) Sky Survey at the Jet Propulsion Laboratory is described. By replacing the time domain multiplicative window preprocessing with polyphase filter processing, much of the processing loss of windowed FFTs can be eliminated. Polyphase coefficient memory costs are minimized by effective use of run length compression. Finite word length effects are analyzed, producing a balanced system with 8 bit inputs, 16 bit fixed point polyphase arithmetic, and 24 bit fixed point FFT arithmetic. Fixed point renormalization midway through the computation is seen to be naturally accommodated by the matrix FFT algorithm proposed. Simulation results validate the finite word length arithmetic analysis and the renormalization technique.

Long frame sync words for binary PSK telemetry

NASA Technical Reports Server (NTRS)

Levitt, B. K.

1975-01-01

Correlation criteria have previously been established for identifying whether a given binary sequence would be a good frame sync word for phase-shift keyed telemetry. In the past, the search for a good K-bit sync word has involved the application of these criteria to the entire set of 2 exponent K binary K-tuples. It is shown that restricting this search to a much smaller subset consisting of K-bit prefixes of pseudonoise sequences results in sync words of comparable quality, with greatly reduced computer search times for larger values of K. As an example, this procedure is used to find good sync words of length 16-63; from a storage viewpoint, each of these sequences can be generated by a 5- or 6-bit linear feedback shift register.

Biological neural networks as model systems for designing future parallel processing computers

NASA Technical Reports Server (NTRS)

Ross, Muriel D.

1991-01-01

One of the more interesting debates of the present day centers on whether human intelligence can be simulated by computer. The author works under the premise that neurons individually are not smart at all. Rather, they are physical units which are impinged upon continuously by other matter that influences the direction of voltage shifts across the units membranes. It is only the action of a great many neurons, billions in the case of the human nervous system, that intelligent behavior emerges. What is required to understand even the simplest neural system is painstaking analysis, bit by bit, of the architecture and the physiological functioning of its various parts. The biological neural network studied, the vestibular utricular and saccular maculas of the inner ear, are among the most simple of the mammalian neural networks to understand and model. While there is still a long way to go to understand even this most simple neural network in sufficient detail for extrapolation to computers and robots, a start was made. Moreover, the insights obtained and the technologies developed help advance the understanding of the more complex neural networks that underlie human intelligence.

Unclassified Report of Investigation on Allegations Relating to USCENTCOM Intelligence Products

DTIC Science & Technology

2017-01-31

stated that he often wanted to “let the information bake ,” which meant waiting to see what other information came in to see if it will “change our line... bake a little bit. Let’s kind of distill the information, because a lot of times the first bits of information that do come out are not necessarily...percentage that is wrong out of that piece of information. So if it’s kind of a, doesn’t make sense. We’re not really sure. The thought is let it bake

Automated Test Requirement Document Generation

DTIC Science & Technology

1987-11-01

DIAGNOSTICS BASED ON THE PRINCIPLES OF ARTIFICIAL INTELIGENCE ", 1984 International Test Conference, 01Oct84, (A3, 3, Cs D3, E2, G2, H2, 13, J6, K) 425...j0O GLOSSARY OF ACRONYMS 0 ABBREVIATION DEFINITION AFSATCOM Air Force Satellite Communication Al Artificial Intelligence ASIC Application Specific...In-Test Equipment (BITE) and AI ( Artificial Intelligence) - Expert Systems - need to be fully applied before a completely automated process can be

Can Computers Create?

ERIC Educational Resources Information Center

Hausman, Carl R.

1985-01-01

To be creative, an act must have as its outcome something new in the way it is intelligible and valuable. Computers have restricted contexts of information and have no ability to weigh bits of information. Computer optimists presuppose either determinism or indeterminism, either of which abandons creativity. (MT)

Steganography -- The New Intelligence Threat

DTIC Science & Technology

2004-01-01

Information can be embedded within text files, digital music and videos, and digital photographs by simply changing bits and bytes. HOW IT WORKS...International Airport could be embedded in Brittany Spears’ latest music release in MP3 format. The wide range of steganography capabilities has been

A scalable SIMD digital signal processor for high-quality multifunctional printer systems

NASA Astrophysics Data System (ADS)

Kang, Hyeong-Ju; Choi, Yongwoo; Kim, Kimo; Park, In-Cheol; Kim, Jung-Wook; Lee, Eul-Hwan; Gahang, Goo-Soo

2005-01-01

This paper describes a high-performance scalable SIMD digital signal processor (DSP) developed for multifunctional printer systems. The DSP supports a variable number of datapaths to cover a wide range of performance and maintain a RISC-like pipeline structure. Many special instructions suitable for image processing algorithms are included in the DSP. Quad/dual instructions are introduced for 8-bit or 16-bit data, and bit-field extraction/insertion instructions are supported to process various data types. Conditional instructions are supported to deal with complex relative conditions efficiently. In addition, an intelligent DMA block is integrated to align data in the course of data reading. Experimental results show that the proposed DSP outperforms a high-end printer-system DSP by at least two times.

Towards constructing multi-bit binary adder based on Belousov-Zhabotinsky reaction

NASA Astrophysics Data System (ADS)

Zhang, Guo-Mao; Wong, Ieong; Chou, Meng-Ta; Zhao, Xin

2012-04-01

It has been proposed that the spatial excitable media can perform a wide range of computational operations, from image processing, to path planning, to logical and arithmetic computations. The realizations in the field of chemical logical and arithmetic computations are mainly concerned with single simple logical functions in experiments. In this study, based on Belousov-Zhabotinsky reaction, we performed simulations toward the realization of a more complex operation, the binary adder. Combining with some of the existing functional structures that have been verified experimentally, we designed a planar geometrical binary adder chemical device. Through numerical simulations, we first demonstrated that the device can implement the function of a single-bit full binary adder. Then we show that the binary adder units can be further extended in plane, and coupled together to realize a two-bit, or even multi-bit binary adder. The realization of chemical adders can guide the constructions of other sophisticated arithmetic functions, ultimately leading to the implementation of chemical computer and other intelligent systems.

Prenatal methyl mercury exposure in relation to neurodevelopment and behavior at 19 years of age in the Seychelles Child Development Study.

PubMed

van Wijngaarden, E; Thurston, S W; Myers, G J; Strain, J J; Weiss, B; Zarcone, T; Watson, G E; Zareba, G; McSorley, E M; Mulhern, M S; Yeates, A J; Henderson, J; Gedeon, J; Shamlaye, C F; Davidson, P W

2013-01-01

Fish are important sources of protein and contain a variety of nutrients, such as n-3 long-chain polyunsaturated fatty acids (PUFA), essential for normal brain development. Nevertheless, all fish also contain methyl mercury (MeHg), a known neurotoxicant in adequate dosage. Our studies of the Seychelles Child Development Study (SCDS) Main Cohort enrolled in 1989-1990 (n=779) have found no consistent pattern of adverse MeHg effects at exposures achieved by daily fish consumption. Rather, we have observed evidence of improved performance on some cognitive endpoints as prenatal MeHg exposure increases in the range studied. These observations cannot be related to MeHg and may reflect the role of unmeasured covariates such as essential nutrients present in fish. To determine if these associations persist into young adulthood, we examined the relationship between prenatal MeHg exposure, recent PUFA exposure and subjects' neurodevelopment and behavior at 19 years of age. We examined 533 participants using the following test battery: the Profile of Mood States-Bipolar (POMS-Bi); Finger Tapping; Kaufman Brief Intelligence Test (K-BIT); measures of Fine Motor Control and Complex Perceptual Motor Control; and Visual Spatial Contrast Sensitivity. We collected the following covariates: maternal IQ, family life course stressors, socioeconomic status, and subjects' recent postnatal MeHg, sex, and computer use. Primary analyses (based on N=392-475) examined covariate-adjusted associations in multiple linear regression models with prenatal MeHg as the primary exposure measure. Secondary analyses additionally adjusted for total n-6 and fish-related n-3 PUFA measured in the subjects' serum at the 19-year examination. Study participants had a mean prenatal MeHg exposure of 6.9 ppm, and a mean recent postnatal exposure of 10.3 ppm. There were no adverse associations between prenatal MeHg and any of the measured endpoints. For recent postnatal MeHg exposure, however, adverse associations were observed for Finger Tapping (non-dominant hand) among women and for the K-BIT Matrices for both sexes, with or without adjustment for PUFA. Our findings continue to provide no evidence for an adverse effect of prenatal MeHg exposure on development in a cohort that consumes fish daily. Observations for postnatal MeHg exposure will need to be confirmed using more comprehensive exposure measures. Copyright © 2013 Elsevier Inc. All rights reserved.

Prenatal methyl mercury exposure in relation to neurodevelopment and behavior at 19 years of age in the Seychelles Child Development Study

PubMed Central

van Wijngaarden, E; Thurston, SW; Myers, GJ; Strain, JJ; Weiss, B; Zarcone, T; Watson, GE; Zareba, G; McSorley, EM; Mulhern, MS; Yeates, AJ; Henderson, J; Gedeon, J; Shamlaye, CF; Davidson, PW

2013-01-01

Background Fish are important sources of protein and contain a variety of nutrients, such as n-3 longchain polyunsaturated fatty acids (PUFA), essential for normal brain development. Nevertheless, all fish also contain methyl mercury (MeHg), a known neurotoxicant in adequate dosage. Our studies of the Seychelles Child Development Study (SCDS) Main Cohort enrolled in 1989–1990 (n=779) have found no consistent pattern of adverse MeHg effects at exposures achieved by daily fish consumption. Rather, we have observed evidence of improved performance on some cognitive endpoints as prenatal MeHg exposure increases in the range studied. These observations cannot be related to MeHg and may reflect the role of unmeasured covariates such as essential nutrients present in fish. To determine if these associations persist into young adulthood, we examined the relationship between prenatal MeHg exposure, recent PUFA exposure and subjects’ neurodevelopment and behavior at 19 years of age. Methods We examined 533 participants using the following test battery: the Profile of Mood States- Bipolar (POMS-Bi); Finger Tapping; Kaufman Brief Intelligence Test (K-BIT); measures of Fine Motor Control and Complex Perceptual Motor Control; and Visual Spatial Contrast Sensitivity. We collected the following covariates: maternal IQ, family life course stressors, socioeconomic status, and subjects’ recent postnatal MeHg, sex, and computer use. Primary analyses (based on N=392–475) examined covariate-adjusted associations in multiple linear regression models with prenatal MeHg as the primary exposure measure. Secondary analyses additionally adjusted for total n-6 and fish-related n-3 PUFA measured in the subjects serum at the 19-year examination. Results Study participants had a mean prenatal MeHg exposure of 6.9 ppm, and a mean recent postnatal exposure of 10.3 ppm. There were no adverse associations between prenatal MeHg and any of the measured endpoints. For recent postnatal MeHg exposure, however, adverse associations were observed for Finger Tapping (non-dominant hand) among women and for the K-BIT matrices for both sexes, with or without adjustment for PUFA. Conclusion Our findings continue to provide no evidence for an adverse effect of prenatal MeHg exposure on development in a cohort that consumes fish daily. Observations for postnatal MeHg exposure will need to be confirmed using more comprehensive exposure measures. PMID:23770126

A Dynamic Analysis of the Medium Tank Battalion. Volume I

DTIC Science & Technology

1978-06-01

best available copy. W. KEY WORDS (Cortinue an reverse oIde If necessary And Identifty block number) CONSTRUCTION; PLANNING; MANAGEMENT; MODELS...unit, with 64K, 8-bit bytes, (2) Dual-disk drive, 2 Discs at 262K, 8-bit bytes, (3) Cathode Ray Tube Console and Keyboard, (4) High- speed printer, (5

Experimental evaluation of a new form of M-ary (M = 8) phase shift keying including design of the transmitter and receiver

NASA Astrophysics Data System (ADS)

Thompson, G. E.

1984-12-01

For transmitting digital information over bandpass channels, M-ary Phase Shift Keying 8(PSK) schemes are used to conserve bandwidth at the expense of signal power. A block of k bits is used to change the phase of the carrier. These k bits represent M possible phase shifts since M = 2. Common forms of M-ary PSK use equally spaced phase angles. For example, if M = 8 and k=3, 8-ary PSK uses eight phase angles spaced 45 degrees apart. This thesis considers a hybrid form of PSK when M = 8 and k = 3. Each of eight blocks of data with three bits per block are represented by different phase shifts of the carrier. The phase angles are chosen to give an equal distance between states (symbols) when projected onto the sine axis and the cosine axis of a phasor diagram. Thus, when the three bits are recovered, using two coherent phase detectors, the separation of the decision regions (voltage levels) are equal.

Reducing weight precision of convolutional neural networks towards large-scale on-chip image recognition

NASA Astrophysics Data System (ADS)

Ji, Zhengping; Ovsiannikov, Ilia; Wang, Yibing; Shi, Lilong; Zhang, Qiang

2015-05-01

In this paper, we develop a server-client quantization scheme to reduce bit resolution of deep learning architecture, i.e., Convolutional Neural Networks, for image recognition tasks. Low bit resolution is an important factor in bringing the deep learning neural network into hardware implementation, which directly determines the cost and power consumption. We aim to reduce the bit resolution of the network without sacrificing its performance. To this end, we design a new quantization algorithm called supervised iterative quantization to reduce the bit resolution of learned network weights. In the training stage, the supervised iterative quantization is conducted via two steps on server - apply k-means based adaptive quantization on learned network weights and retrain the network based on quantized weights. These two steps are alternated until the convergence criterion is met. In this testing stage, the network configuration and low-bit weights are loaded to the client hardware device to recognize coming input in real time, where optimized but expensive quantization becomes infeasible. Considering this, we adopt a uniform quantization for the inputs and internal network responses (called feature maps) to maintain low on-chip expenses. The Convolutional Neural Network with reduced weight and input/response precision is demonstrated in recognizing two types of images: one is hand-written digit images and the other is real-life images in office scenarios. Both results show that the new network is able to achieve the performance of the neural network with full bit resolution, even though in the new network the bit resolution of both weight and input are significantly reduced, e.g., from 64 bits to 4-5 bits.

Cascade Error Projection with Low Bit Weight Quantization for High Order Correlation Data

NASA Technical Reports Server (NTRS)

Duong, Tuan A.; Daud, Taher

1998-01-01

In this paper, we reinvestigate the solution for chaotic time series prediction problem using neural network approach. The nature of this problem is such that the data sequences are never repeated, but they are rather in chaotic region. However, these data sequences are correlated between past, present, and future data in high order. We use Cascade Error Projection (CEP) learning algorithm to capture the high order correlation between past and present data to predict a future data using limited weight quantization constraints. This will help to predict a future information that will provide us better estimation in time for intelligent control system. In our earlier work, it has been shown that CEP can sufficiently learn 5-8 bit parity problem with 4- or more bits, and color segmentation problem with 7- or more bits of weight quantization. In this paper, we demonstrate that chaotic time series can be learned and generalized well with as low as 4-bit weight quantization using round-off and truncation techniques. The results show that generalization feature will suffer less as more bit weight quantization is available and error surfaces with the round-off technique are more symmetric around zero than error surfaces with the truncation technique. This study suggests that CEP is an implementable learning technique for hardware consideration.

Effect of PDC bit design and confining pressure on bit-balling tendencies while drilling shale using water base mud

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hariharan, P.R.; Azar, J.J.

1996-09-01

A good majority of all oilwell drilling occurs in shale and other clay-bearing rocks. In the light of relatively fewer studies conducted, the problem of bit-balling in PDC bits while drilling shale has been addressed with the primary intention of attempting to quantify the degree of balling, as well as to investigate the influence of bit design and confining pressures. A series of full-scale laboratory drilling tests under simulated down hole conditions were conducted utilizing seven different PDC bits in Catoosa shale. Test results have indicated that the non-dimensional parameter R{sub d} [(bit torque).(weight-on-bit)/(bit diameter)] is a good indicator ofmore » the degree of bit-balling and that it correlated well with Specific-Energy. Furthermore, test results have shown bit-profile and bit-hydraulic design to be key parameters of bit design that dictate the tendency of balling in shales under a given set of operating conditions. A bladed bit was noticed to ball less compared to a ribbed or open-faced bit. Likewise, related to bit profile, test results have indicated that the parabolic profile has a lesser tendency to ball compared to round and flat profiles. The tendency of PDC bits to ball was noticed to increase with increasing confining pressures for the set of drilling conditions used.« less

MobileASL: intelligibility of sign language video over mobile phones.

PubMed

Cavender, Anna; Vanam, Rahul; Barney, Dane K; Ladner, Richard E; Riskin, Eve A

2008-01-01

For Deaf people, access to the mobile telephone network in the United States is currently limited to text messaging, forcing communication in English as opposed to American Sign Language (ASL), the preferred language. Because ASL is a visual language, mobile video phones have the potential to give Deaf people access to real-time mobile communication in their preferred language. However, even today's best video compression techniques can not yield intelligible ASL at limited cell phone network bandwidths. Motivated by this constraint, we conducted one focus group and two user studies with members of the Deaf Community to determine the intelligibility effects of video compression techniques that exploit the visual nature of sign language. Inspired by eye tracking results that show high resolution foveal vision is maintained around the face, we studied region-of-interest encodings (where the face is encoded at higher quality) as well as reduced frame rates (where fewer, better quality, frames are displayed every second). At all bit rates studied here, participants preferred moderate quality increases in the face region, sacrificing quality in other regions. They also preferred slightly lower frame rates because they yield better quality frames for a fixed bit rate. The limited processing power of cell phones is a serious concern because a real-time video encoder and decoder will be needed. Choosing less complex settings for the encoder can reduce encoding time, but will affect video quality. We studied the intelligibility effects of this tradeoff and found that we can significantly speed up encoding time without severely affecting intelligibility. These results show promise for real-time access to the current low-bandwidth cell phone network through sign-language-specific encoding techniques.

PDC-bit performance under simulated borehole conditions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, E.E.; Azar, J.J.

1993-09-01

Laboratory drilling tests were used to investigate the effects of pressure on polycrystalline-diamond-compact (PDC) drill-bit performance. Catoosa shale core samples were drilled with PDC and roller-cone bits at up to 1,750-psi confining pressure. All tests were conducted in a controlled environment with a full-scale laboratory drilling system. Test results indicate, that under similar operating conditions, increases in confining pressure reduce PDC-bit performance as much as or more than conventional-rock-bit performance. Specific energy calculations indicate that a combination of rock strength, chip hold-down, and bit balling may have reduced performance. Quantifying the degree to which pressure reduces PDC-bit performance will helpmore » researchers interpret test results and improve bit designs and will help drilling engineers run PDC bits more effectively in the field.« less

Demonstration of the CDMA-mode CAOS smart camera.

PubMed

Riza, Nabeel A; Mazhar, Mohsin A

2017-12-11

Demonstrated is the code division multiple access (CDMA)-mode coded access optical sensor (CAOS) smart camera suited for bright target scenarios. Deploying a silicon CMOS sensor and a silicon point detector within a digital micro-mirror device (DMD)-based spatially isolating hybrid camera design, this smart imager first engages the DMD starring mode with a controlled factor of 200 high optical attenuation of the scene irradiance to provide a classic unsaturated CMOS sensor-based image for target intelligence gathering. Next, this CMOS sensor provided image data is used to acquire a focused zone more robust un-attenuated true target image using the time-modulated CDMA-mode of the CAOS camera. Using four different bright light test target scenes, successfully demonstrated is a proof-of-concept visible band CAOS smart camera operating in the CDMA-mode using up-to 4096 bits length Walsh design CAOS pixel codes with a maximum 10 KHz code bit rate giving a 0.4096 seconds CAOS frame acquisition time. A 16-bit analog-to-digital converter (ADC) with time domain correlation digital signal processing (DSP) generates the CDMA-mode images with a 3600 CAOS pixel count and a best spatial resolution of one micro-mirror square pixel size of 13.68 μm side. The CDMA-mode of the CAOS smart camera is suited for applications where robust high dynamic range (DR) imaging is needed for un-attenuated un-spoiled bright light spectrally diverse targets.

A 16K-bit static IIL RAM with 25-ns access time

NASA Astrophysics Data System (ADS)

Inabe, Y.; Hayashi, T.; Kawarada, K.; Miwa, H.; Ogiue, K.

1982-04-01

A 16,384 x 1-bit RAM with 25-ns access time, 600-mW power dissipation, and 33 sq mm chip size has been developed. Excellent speed-power performance with high packing density has been achieved by an oxide isolation technology in conjunction with novel ECL circuit techniques and IIL flip-flop memory cells, 980 sq microns (35 x 28 microns) in cell size. Development results have shown that IIL flip-flop memory cell is a trump card for assuring achievement of a high-performance large-capacity bipolar RAM, in the above 16K-bit/chip area.

Low blood lead levels impair intellectual and hematological function in children from Cartagena, Caribbean coast of Colombia.

PubMed

Alvarez-Ortega, Neda; Caballero-Gallardo, Karina; Olivero-Verbel, Jesus

2017-12-01

Lead produces numerous biochemical and physiological changes in humans, including hematological disorders, toxic effects on the central nervous system and in the function of several organs. The aim of this study was to determine blood lead levels (BLL) in children from Cartagena, Colombia, associating those with hematological and liver damage markers, the intelligence quotient (IQ), as well as with gene expression of the aminolevulinate dehydratase (ALAD), superoxide dismutase 1 (SOD1), gamma interferon (INF-γ), tumor necrosis factor (TNF) and tumor protein (p53). To achieve this purpose, 118 blood samples were collected from children 5-16 years old, with their respective informed consent from their parents. BLL was measured by atomic absorption; hematological parameters were obtained with automated systems; plasma was utilized to analyze hepatic toxicity markers, alanine aminotransferase (ALT), gamma-glutamyltransferase (γ-GT) and alkaline phosphatase (ALP); the Kaufman Brief Intelligence Test (K-BIT) was administered to measure the IQ; and gene expression was quantified from blood RNA. The mean BLL was 1.7±0.3μg/dL. A low proportion of the children (3.4%) had BLL above the CDC recommended limit (5μg/dL). BLL were correlated weakly, but negatively with child age, weight, height, body mass index, platelets wide distribution, mean platelet volume, γ-GT and IQ. There were not significant changes in the expression of evaluated genes. These results support the hypothesis that BLL below 5μg/dL may still be a detrimental factor on children's cognitive abilities, development and hematology, in line with recent concerns that there is no safe level of pediatric lead exposure. Copyright © 2017 Elsevier GmbH. All rights reserved.

Single-Word Multiple-Bit Upsets in Static Random Access Devices

DTIC Science & Technology

1998-01-15

Transactions on Nuclear Science, NS-33, 1616- 1619,1986. Criswell, T.L., P.R. Measel , and K.L. Walin, "Single Event Upset Testing with Relativistic...Heavy Ions," IEEE Transactions on Nuclear Science, NS-31, 1559- 1561,1984. 1946 3. Criswell, T.L., D.L. Oberg, J.L. Wert, P.R. Measel , and W.E

Acoustic Seaglider (trademark) for Beaked Whale Detection

DTIC Science & Technology

2011-09-30

are given below. • • • • • Four channels, 16-bit digitization 250kHz maximum aggregate sample rate Plug-in passive filters ( TTE ) Optional...0 was of Seagliders SG 178 and SG179 at the Atlantic Undersea Test and Evaluation Center (AUTEC), between 6JUN20 I 0 and 11 JUN20 10. The Seagliders

Testing of Error-Correcting Sparse Permutation Channel Codes

NASA Technical Reports Server (NTRS)

Shcheglov, Kirill, V.; Orlov, Sergei S.

2008-01-01

A computer program performs Monte Carlo direct numerical simulations for testing sparse permutation channel codes, which offer strong error-correction capabilities at high code rates and are considered especially suitable for storage of digital data in holographic and volume memories. A word in a code of this type is characterized by, among other things, a sparseness parameter (M) and a fixed number (K) of 1 or "on" bits in a channel block length of N.

A microprocessor based on a two-dimensional semiconductor.

PubMed

Wachter, Stefan; Polyushkin, Dmitry K; Bethge, Ole; Mueller, Thomas

2017-04-11

The advent of microcomputers in the 1970s has dramatically changed our society. Since then, microprocessors have been made almost exclusively from silicon, but the ever-increasing demand for higher integration density and speed, lower power consumption and better integrability with everyday goods has prompted the search for alternatives. Germanium and III-V compound semiconductors are being considered promising candidates for future high-performance processor generations and chips based on thin-film plastic technology or carbon nanotubes could allow for embedding electronic intelligence into arbitrary objects for the Internet-of-Things. Here, we present a 1-bit implementation of a microprocessor using a two-dimensional semiconductor-molybdenum disulfide. The device can execute user-defined programs stored in an external memory, perform logical operations and communicate with its periphery. Our 1-bit design is readily scalable to multi-bit data. The device consists of 115 transistors and constitutes the most complex circuitry so far made from a two-dimensional material.

A microprocessor based on a two-dimensional semiconductor

NASA Astrophysics Data System (ADS)

Wachter, Stefan; Polyushkin, Dmitry K.; Bethge, Ole; Mueller, Thomas

2017-04-01

The advent of microcomputers in the 1970s has dramatically changed our society. Since then, microprocessors have been made almost exclusively from silicon, but the ever-increasing demand for higher integration density and speed, lower power consumption and better integrability with everyday goods has prompted the search for alternatives. Germanium and III-V compound semiconductors are being considered promising candidates for future high-performance processor generations and chips based on thin-film plastic technology or carbon nanotubes could allow for embedding electronic intelligence into arbitrary objects for the Internet-of-Things. Here, we present a 1-bit implementation of a microprocessor using a two-dimensional semiconductor--molybdenum disulfide. The device can execute user-defined programs stored in an external memory, perform logical operations and communicate with its periphery. Our 1-bit design is readily scalable to multi-bit data. The device consists of 115 transistors and constitutes the most complex circuitry so far made from a two-dimensional material.

Development of a high capacity bubble domain memory element and related epitaxial garnet materials for application in spacecraft data recorders. Item 1: Development of a high capacity memory element

NASA Technical Reports Server (NTRS)

Besser, P. J.

1977-01-01

Several versions of the 100K bit chip, which is configured as a single serial loop, were designed, fabricated and evaluated. Design and process modifications were introduced into each succeeding version to increase device performance and yield. At an intrinsic field rate of 150 KHz the final design operates from -10 C to +60 C with typical bias margins of 12 and 8 percent, respectively, for continuous operation. Asynchronous operation with first bit detection on start-up produces essentially the same margins over the temperature range. Cost projections made from fabrication yield runs on the 100K bit devices indicate that the memory element cost will be less than 10 millicents/bit in volume production.

Associative architecture for image processing

NASA Astrophysics Data System (ADS)

Adar, Rutie; Akerib, Avidan

1997-09-01

This article presents a new generation in parallel processing architecture for real-time image processing. The approach is implemented in a real time image processor chip, called the XiumTM-2, based on combining a fully associative array which provides the parallel engine with a serial RISC core on the same die. The architecture is fully programmable and can be programmed to implement a wide range of color image processing, computer vision and media processing functions in real time. The associative part of the chip is based on patented pending methodology of Associative Computing Ltd. (ACL), which condenses 2048 associative processors, each of 128 'intelligent' bits. Each bit can be a processing bit or a memory bit. At only 33 MHz and 0.6 micron manufacturing technology process, the chip has a computational power of 3 billion ALU operations per second and 66 billion string search operations per second. The fully programmable nature of the XiumTM-2 chip enables developers to use ACL tools to write their own proprietary algorithms combined with existing image processing and analysis functions from ACL's extended set of libraries.

Design of Intelligent Cross-Layer Routing Protocols for Airborne Wireless Networks Under Dynamic Spectrum Access Paradigm

DTIC Science & Technology

2011-05-01

rate convolutional codes or the prioritized Rate - Compatible Punctured ...Quality of service RCPC Rate - compatible and punctured convolutional codes SNR Signal to noise ratio SSIM... Convolutional (RCPC) codes . The RCPC codes achieve UEP by puncturing off different amounts of coded bits of the parent code . The

Battlefield Object Control via Internet Architecture

DTIC Science & Technology

2002-01-01

superiority is the best way to reach the goal of competition superiority. Using information technology (IT) in data processing, including computer hardware... technologies : Global Positioning System (GPS), Geographic Information System (GIS), Battlefield Information Transmission System (BITS), and Intelligent...operational environment. Keywords: C4ISR Systems, Information Superiority, Battlefield Objects, Computer - Aided Prototyping System (CAPS), IP-based

Good cognitive performances in a child with Prader-Willi syndrome.

PubMed

Nugnes, Rosa; Zito, Eugenio; Mozzillo, Enza; Camarca, Maria Erminia; Riccio, Maria Pia; Terrone, Gaetano; Melis, Daniela; Bravaccio, Carmela; Franzese, Adriana

2013-11-15

We report the case of a child affected by Prader-Willi syndrome (PWS) with good cognitive performances and without relevant behavioral abnormalities.The diagnosis of PWS, suspected on the basis of clinical features and past history, was confirmed by DNA methylation analysis. Additional genetic testing revealed a maternal uniparental disomy. Intellectual profile was analyzed by WISC-III and Raven's Progressive Matrices CPM, while the behavior was evaluated by K-SADS-PL and Child Behavior Checklist/4-18 to the parents.WISC-III test showed a Total Intelligence Quotient (T-IQ = 79) at the border level for age. The Verbal Intelligence Quotient (V-IQ) showed a lower score than the Performance Intelligence Quotient (P-IQ) (78 and 85, respectively). Raven's Matrices CPM showed an intelligence level at 75-90° percentile for age. Concerning behavioral evaluation, a difficulty in impulse control was observed, with persistent but controllable search for food, without a clear psychopathological meaning. Also according to K-SADS-PL no areas of psychopathological dimensions were detected. In conclusion, in presence of consisting clinical features of PWS and high diagnostic suspicion, the diagnosis of PWS should be considered even in presence of a borderline IQ and in absence of psychopathological abnormalities.

Intelligent screening of electrofusion-polyethylene joints based on a thermal NDT method

NASA Astrophysics Data System (ADS)

Doaei, Marjan; Tavallali, M. Sadegh

2018-05-01

The combinations of infrared thermal images and artificial intelligence methods have opened new avenues for pushing the boundaries of available testing methods. Hence, in the current study, a novel thermal non-destructive testing method for polyethylene electrofusion joints was combined with k-means clustering algorithms as an intelligent screening tool. The experiments focused on ovality of pipes in the coupler, as well as misalignment of pipes-couplers in 25 mm diameter joints. The temperature responses of each joint to an internal heat pulse were recorded by an IR thermal camera, and further processed to identify the faulty joints. The results represented clustering accuracy of 92%, as well as more than 90% abnormality detection capabilities.

Large-Constraint-Length, Fast Viterbi Decoder

NASA Technical Reports Server (NTRS)

Collins, O.; Dolinar, S.; Hsu, In-Shek; Pollara, F.; Olson, E.; Statman, J.; Zimmerman, G.

1990-01-01

Scheme for efficient interconnection makes VLSI design feasible. Concept for fast Viterbi decoder provides for processing of convolutional codes of constraint length K up to 15 and rates of 1/2 to 1/6. Fully parallel (but bit-serial) architecture developed for decoder of K = 7 implemented in single dedicated VLSI circuit chip. Contains six major functional blocks. VLSI circuits perform branch metric computations, add-compare-select operations, and then store decisions in traceback memory. Traceback processor reads appropriate memory locations and puts out decoded bits. Used as building block for decoders of larger K.

[Prediction of modality-specific working memory performance in kindergarten age].

PubMed

Kiese-Himmel, Christiane

2018-04-10

Working memory (WM) as a central cognitive construct is a fundamental prerequisite for learning and provides a marker of developmental disorders. It has received considerable attention in recent years. Here, multivariate regression analyses using generalized linear models were conducted to determine predictor variables for phonological and visuospatial WM. The phonological WM was investigated by repetition of non-words (subtest PGN of the German SETK 3-5) and number recall (K-ABC-subtest), the visuospatial WM by the imitation of a sequence hand movements (K-ABC-subtest hand movements). The estimation of intelligence was operationalized by the performance in the K-ABC-scale "Simultaneous Processing". Kindergarten kids (N = 169; 49 % boys; 51 % girls), mostly with migration background and German as second language (mean age: 45.9; SD 6.2; min 36, max 61 months). They visited the kindergarten at the time of testing for 9.9 (SD 6.9) months, on average and had an average intelligence. Independent variables were chronological age, gender, kindergarten attendance until the test examination, intelligence, migration background. Both phonological and visuospatial working WM performance were on average not reduced. Chronological age and simultaneous processing were found to be significant predictors for the performance in all WM tests. In the age from 36 to 61 months both working memory systems can be described as a congenital, maturity-dependent and rather gender non-specific mechanism. © Georg Thieme Verlag KG Stuttgart · New York.

PDC bits: What`s needed to meet tomorrow`s challenge

DOE Office of Scientific and Technical Information (OSTI.GOV)

Warren, T.M.; Sinor, L.A.

1994-12-31

When polycrystalline diamond compact (PDC) bits were introduced in the mid-1970s they showed tantalizingly high penetration rates in laboratory drilling tests. Single cutter tests indicated that they had the potential to drill very hard rocks. Unfortunately, 20 years later we`re still striving to reach the potential that these bits seem to have. Many problems have been overcome, and PDC bits have offered capabilities not possible with roller cone bits. PDC bits provide the most economical bit choice in many areas, but their limited durability has hampered their application in many other areas.

Note: optical receiver system for 152-channel magnetoencephalography.

PubMed

Kim, Jin-Mok; Kwon, Hyukchan; Yu, Kwon-kyu; Lee, Yong-Ho; Kim, Kiwoong

2014-11-01

An optical receiver system composing 13 serial data restore/synchronizer modules and a single module combiner converted optical 32-bit serial data into 32-bit synchronous parallel data for a computer to acquire 152-channel magnetoencephalography (MEG) signals. A serial data restore/synchronizer module identified 32-bit channel-voltage bits from 48-bit streaming serial data, and then consecutively reproduced 13 times of 32-bit serial data, acting in a synchronous clock. After selecting a single among 13 reproduced data in each module, a module combiner converted it into 32-bit parallel data, which were carried to 32-port digital input board in a computer. When the receiver system together with optical transmitters were applied to 152-channel superconducting quantum interference device sensors, this MEG system maintained a field noise level of 3 fT/√Hz @ 100 Hz at a sample rate of 1 kSample/s per channel.

Leo Szilard In Physics and Information

NASA Astrophysics Data System (ADS)

Garwin, Richard

2014-03-01

The excellent biography by William Lanouette, ``Genius in the Shadows,'' tells it the way it was, incredible though it may seem. The 1972 ``Collected Works of Leo Szilard: Scientific Papers'' Bernard T. Feld and Getrude W. Szilard, Editors, gives the source material both published and unpublished. Szilard's path-breaking but initially little-noticed 1929 paper, ``On the Decrease of Entropy in a Thermodynamic System by the Intervention of Intelligent Beings'' spawned much subsequent research. It connected what we now call a bit of information with a quantity k ln 2 of entropy, and showed that the process of acquiring, exploiting, and resetting this information in a one-molecule engine must dissipate at least kT ln 2 of energy at temperature T. His 1925 paper, ``On the Extension of Phenomenological Thermodynamics to Fluctuation Phenomena,'' showed that fluctuations were consistent with and predicted from equilibrium thermodynamics and did not depend on atomistic theories. His work on physics and technology, demonstrated an astonishing range of interest, ingenuity, foresight, and practical sense. I illustrate this with several of his fundamental contributions nuclear physics, to the neutron chain reaction and to nuclear reactors, and also to electromagnetic pumping of liquid metals.

Command system output bit verification

NASA Technical Reports Server (NTRS)

Odd, C. W.; Abbate, S. F.

1981-01-01

An automatic test was developed to test the ability of the deep space station (DSS) command subsystem and exciter to generate and radiate, from the exciter, the correct idle bit sequence for a given flight project or to store and radiate received command data elements and files without alteration. This test, called the command system output bit verification test, is an extension of the command system performance test (SPT) and can be selected as an SPT option. The test compares the bit stream radiated from the DSS exciter with reference sequences generated by the SPT software program. The command subsystem and exciter are verified when the bit stream and reference sequences are identical. It is a key element of the acceptance testing conducted on the command processor assembly (CPA) operational program (DMC-0584-OP-G) prior to its transfer from development to operations.

Low bit-rate image compression via adaptive down-sampling and constrained least squares upconversion.

PubMed

Wu, Xiaolin; Zhang, Xiangjun; Wang, Xiaohan

2009-03-01

Recently, many researchers started to challenge a long-standing practice of digital photography: oversampling followed by compression and pursuing more intelligent sparse sampling techniques. In this paper, we propose a practical approach of uniform down sampling in image space and yet making the sampling adaptive by spatially varying, directional low-pass prefiltering. The resulting down-sampled prefiltered image remains a conventional square sample grid, and, thus, it can be compressed and transmitted without any change to current image coding standards and systems. The decoder first decompresses the low-resolution image and then upconverts it to the original resolution in a constrained least squares restoration process, using a 2-D piecewise autoregressive model and the knowledge of directional low-pass prefiltering. The proposed compression approach of collaborative adaptive down-sampling and upconversion (CADU) outperforms JPEG 2000 in PSNR measure at low to medium bit rates and achieves superior visual quality, as well. The superior low bit-rate performance of the CADU approach seems to suggest that oversampling not only wastes hardware resources and energy, and it could be counterproductive to image quality given a tight bit budget.

A microprocessor based on a two-dimensional semiconductor

PubMed Central

Wachter, Stefan; Polyushkin, Dmitry K.; Bethge, Ole; Mueller, Thomas

2017-01-01

The advent of microcomputers in the 1970s has dramatically changed our society. Since then, microprocessors have been made almost exclusively from silicon, but the ever-increasing demand for higher integration density and speed, lower power consumption and better integrability with everyday goods has prompted the search for alternatives. Germanium and III–V compound semiconductors are being considered promising candidates for future high-performance processor generations and chips based on thin-film plastic technology or carbon nanotubes could allow for embedding electronic intelligence into arbitrary objects for the Internet-of-Things. Here, we present a 1-bit implementation of a microprocessor using a two-dimensional semiconductor—molybdenum disulfide. The device can execute user-defined programs stored in an external memory, perform logical operations and communicate with its periphery. Our 1-bit design is readily scalable to multi-bit data. The device consists of 115 transistors and constitutes the most complex circuitry so far made from a two-dimensional material. PMID:28398336

An intelligent FFR with a self-adjustable ventilation fan.

PubMed

Zhou, Song; Li, Hui; Shen, Shengnan; Li, Siyu; Wang, Wei; Zhang, Xiaotie; Yang, James

2017-11-01

This article presents an intelligent Filtering Facepiece Respirator (FFR) with a self-adjustable ventilation fan for improved comfort. The ventilation fan with an intelligent control aims to reduce temperature, relative humidity, and CO 2 concentrations inside the facepiece. Compared with a previous version of the FFR, the advantage of this new FFR is the intelligent control of the fan's rotation speed based on the change in temperature and relative humidity in the FFR dead space. The design of the control system utilizes an 8-bit, ultra-low power STC15W404AS microcontroller (HongJin technology, Shenzhen, China), and adopts a high-precision AM2320 device (AoSong electronic, Guangzhou, China) as temperature and relative humidity sensor so that control of temperature and relative humidity is realized in real time within the FFR dead space. The ventilation fan is intelligently driven and runs on a rechargeable lithium battery with a power-save mode that provides a correspondingly longer operational time. Meanwhile, the design is simplistic. Two experiments were performed to determine the best location to place the fan.

Flight test of a full authority Digital Electronic Engine Control system in an F-15 aircraft

NASA Technical Reports Server (NTRS)

Barrett, W. J.; Rembold, J. P.; Burcham, F. W.; Myers, L.

1981-01-01

The Digital Electronic Engine Control (DEEC) system considered is a relatively low cost digital full authority control system containing selectively redundant components and fault detection logic with capability for accommodating faults to various levels of operational capability. The DEEC digital control system is built around a 16-bit, 1.2 microsecond cycle time, CMOS microprocessor, microcomputer system with approximately 14 K of available memory. Attention is given to the control mode, component bench testing, closed loop bench testing, a failure mode and effects analysis, sea-level engine testing, simulated altitude engine testing, flight testing, the data system, cockpit, and real time display.

Multiple trellis coded modulation

NASA Technical Reports Server (NTRS)

Simon, Marvin K. (Inventor); Divsalar, Dariush (Inventor)

1990-01-01

A technique for designing trellis codes to minimize bit error performance for a fading channel. The invention provides a criteria which may be used in the design of such codes which is significantly different from that used for average white Gaussian noise channels. The method of multiple trellis coded modulation of the present invention comprises the steps of: (a) coding b bits of input data into s intermediate outputs; (b) grouping said s intermediate outputs into k groups of s.sub.i intermediate outputs each where the summation of all s.sub.i,s is equal to s and k is equal to at least 2; (c) mapping each of said k groups of intermediate outputs into one of a plurality of symbols in accordance with a plurality of modulation schemes, one for each group such that the first group is mapped in accordance with a first modulation scheme and the second group is mapped in accordance with a second modulation scheme; and (d) outputting each of said symbols to provide k output symbols for each b bits of input data.

An Intelligent Sensor Array Distributed System for Vibration Analysis and Acoustic Noise Characterization of a Linear Switched Reluctance Actuator

PubMed Central

Salvado, José; Espírito-Santo, António; Calado, Maria

2012-01-01

This paper proposes a distributed system for analysis and monitoring (DSAM) of vibrations and acoustic noise, which consists of an array of intelligent modules, sensor modules, communication bus and a host PC acting as data center. The main advantages of the DSAM are its modularity, scalability, and flexibility for use of different type of sensors/transducers, with analog or digital outputs, and for signals of different nature. Its final cost is also significantly lower than other available commercial solutions. The system is reconfigurable, can operate either with synchronous or asynchronous modes, with programmable sampling frequencies, 8-bit or 12-bit resolution and a memory buffer of 15 kbyte. It allows real-time data-acquisition for signals of different nature, in applications that require a large number of sensors, thus it is suited for monitoring of vibrations in Linear Switched Reluctance Actuators (LSRAs). The acquired data allows the full characterization of the LSRA in terms of its response to vibrations of structural origins, and the vibrations and acoustic noise emitted under normal operation. The DSAM can also be used for electrical machine condition monitoring, machine fault diagnosis, structural characterization and monitoring, among other applications. PMID:22969364

A Study of a Standard BIT Circuit.

DTIC Science & Technology

1977-02-01

IENDED BIT APPROACHES FOR QED MODULES AND APPLICATION OF THE ANALYTIC MEASURES 36 4.1 Built-In-Test for Memory Class Modules 37 4.1.1 Random Access...Implementation 68 4.1.5.5 Criti cal Parameters 68 4.1.5.6 QED Module Test Equipment Requirements 68 4.1.6 Application of Analytic Measures to the...Microprocessor BIT Techniques.. 121 4.2.9 Application of Analytic Measures to the Recommended BIT App roaches 125 4.2.10 Process Class BIT by Partial

Adding intelligence to mobile asset management in hospitals: the true value of RFID.

PubMed

Castro, Linda; Lefebvre, Elisabeth; Lefebvre, Louis A

2013-10-01

RFID (Radio Frequency Identification) technology is expected to play a vital role in the healthcare arena, especially in times when cost containments are at the top of the priorities of healthcare management authorities. Medical equipment represents a significant share of yearly healthcare operational costs; hence, ensuring an effective and efficient management of such key assets is critical to promptly and reliably deliver a diversity of clinical services at the patient bedside. Empirical evidence from a phased-out RFID implementation in one European hospital demonstrates that RFID has the potential to transform asset management by improving inventory management, enhancing asset utilization, increasing staff productivity, improving care services, enhancing maintenance compliance, and increasing information visibility. Most importantly, RFID allows the emergence of intelligent asset management processes, which is, undoubtedly, the most important benefit that could be derived from the RFID system. Results show that the added intelligence can be rather basic (auto-status change) or a bit more advanced (personalized automatic triggers). More importantly, adding intelligence improves planning and decision-making processes.

Bit-1 Mediates Integrin-dependent Cell Survival through Activation of the NFκB Pathway*

PubMed Central

Griffiths, Genevieve S.; Grundl, Melanie; Leychenko, Anna; Reiter, Silke; Young-Robbins, Shirley S.; Sulzmaier, Florian J.; Caliva, Maisel J.; Ramos, Joe W.; Matter, Michelle L.

2011-01-01

Loss of properly regulated cell death and cell survival pathways can contribute to the development of cancer and cancer metastasis. Cell survival signals are modulated by many different receptors, including integrins. Bit-1 is an effector of anoikis (cell death due to loss of attachment) in suspended cells. The anoikis function of Bit-1 can be counteracted by integrin-mediated cell attachment. Here, we explored integrin regulation of Bit-1 in adherent cells. We show that knockdown of endogenous Bit-1 in adherent cells decreased cell survival and re-expression of Bit-1 abrogated this effect. Furthermore, reduction of Bit-1 promoted both staurosporine and serum-deprivation induced apoptosis. Indeed knockdown of Bit-1 in these cells led to increased apoptosis as determined by caspase-3 activation and positive TUNEL staining. Bit-1 expression protected cells from apoptosis by increasing phospho-IκB levels and subsequently bcl-2 gene transcription. Protection from apoptosis under serum-free conditions correlated with bcl-2 transcription and Bcl-2 protein expression. Finally, Bit-1-mediated regulation of bcl-2 was dependent on focal adhesion kinase, PI3K, and AKT. Thus, we have elucidated an integrin-controlled pathway in which Bit-1 is, in part, responsible for the survival effects of cell-ECM interactions. PMID:21383007

Bilateral hearing loss is associated with decreased nonverbal intelligence in US children aged 6 to 16 years.

PubMed

Emmett, Susan D; Francis, Howard W

2014-09-01

To evaluate the association between hearing loss and nonverbal intelligence in US children. The Third National Health and Nutrition Examination Survey (NHANES III) is a cross-sectional survey (1988-1994) that used complex multistage sampling design to produce nationally representative demographic and examination data. A total of 4,823 children ages 6 to 16 years completed audiometric evaluation and cognitive testing during NHANES III. Hearing loss was defined as low-frequency pure-tone average (PTA) >25 dB (0.5, 1, 2 kHz) or high-frequency PTA >25 dB (3, 4, 6, 8 kHz) and was designated as unilateral or bilateral. Nonverbal intelligence was measured using the Wechsler Intelligence Scale for Children-Revised block design subtest. Low nonverbal intelligence was defined as a standardized score <4, two standard deviations below the standardized mean of 10. Mean nonverbal intelligence scores differed between children with normal hearing (9.59) and children with bilateral (6.87; P = .02) but not unilateral (9.12; P = .42) hearing loss. Non-Hispanic black race/ethnicity and family income <$20,000 were associated with 3.92 and 1.67 times higher odds of low nonverbal intelligence, respectively (odds ratio [OR]: 3.92; P < .001; OR: 1.67; P = .02). Bilateral hearing loss was independently associated with 5.77 times increased odds of low nonverbal intelligence compared to normal hearing children (OR: 5.77; P = .02). Unilateral hearing loss was not associated with higher odds of low nonverbal intelligence (OR: 0.73; P = .40). Bilateral but not unilateral hearing loss is associated with decreased nonverbal intelligence in US children. Longitudinal studies are urgently needed to better understand these associations and their potential impact on future opportunities. © 2014 The American Laryngological, Rhinological and Otological Society, Inc.

Bilateral Hearing Loss is Associated with Decreased Nonverbal Intelligence in US Children Ages 6 to 16 Years

PubMed Central

Emmett, Susan D.; Francis, Howard W.

2017-01-01

Objectives To evaluate the association between hearing loss and nonverbal intelligence in US children. Study Design The Third National Health and Nutrition Examination Survey (NHANES III) is a cross-sectional survey (1988–1994) that used complex multistage sampling design to produce nationally representative demographic and examination data. Methods A total of 4823 children ages 6–16 years completed audiometric evaluation and cognitive testing during NHANES III. Hearing loss was defined as low frequency pure tone average (PTA)>25 decibels (dB) (0.5,1,2 kHz) or high frequency PTA>25dB (3,4,6,8 kHz) and was designated as unilateral or bilateral. Nonverbal intelligence was measured using the Wechsler Intelligence Scale for Children-Revised block design subtest. Low nonverbal intelligence was defined as a standardized score <4, two standard deviations below the standardized mean of 10. Results Mean nonverbal intelligence scores differed between children with normal hearing (9.59) and children with bilateral (6.87; p=0.02) but not unilateral (9.12; p=0.42) hearing loss. Non-Hispanic black race/ethnicity and family income<$20,000 were associated with 3.92 and 1.67 times higher odds of low nonverbal intelligence, respectively (OR 3.92; p<0.001; OR 1.67; p=0.02). Bilateral hearing loss was independently associated with 5.77 times increased odds of low nonverbal intelligence compared to normal hearing children (OR 5.77; p=0.02). Unilateral hearing loss was not associated with higher odds of low nonverbal intelligence (OR 0.73; p=0.40). Conclusion Bilateral but not unilateral hearing loss is associated with decreased nonverbal intelligence in US children. Longitudinal studies are urgently needed to better understand these associations and their potential impact on future opportunities. PMID:24913183

Effects of size on three-cone bit performance in laboratory drilled shale

DOE Office of Scientific and Technical Information (OSTI.GOV)

Black, A.D.; DiBona, B.G.; Sandstrom, J.L.

1982-09-01

The effects of size on the performance of 3-cone bits were measured during laboratory drilling tests in shale at simulated downhole conditions. Four Reed HP-SM 3-cone bits with diameters of 6 1/2, 7 7/8, 9 1/2 and 11 inches were used to drill Mancos shale with water-based mud. The tests were conducted at constant borehole pressure, two conditions of hydraulic horsepower per square inch of bit area, three conditions of rotary speed and four conditions of weight-on-bit per inch of bit diameter. The resulting penetration rates and torques were measured. Statistical techniques were used to analyze the data.

Miniaturized module for the wireless transmission of measurements with Bluetooth.

PubMed

Roth, H; Schwaibold, M; Moor, C; Schöchlin, J; Bolz, A

2002-01-01

The wiring of patients for obtaining medical measurements has many disadvantages. In order to limit these, a miniaturized module was developed which digitalizes analog signals and sends the signal wirelessly to the receiver using Bluetooth. Bluetooth is especially suitable for this application because distances of up to 10 m are possible with low power consumption and robust transmission with encryption. The module consists of a Bluetooth chip, which is initialized in such a way by a microcontroller that connections from other bluetooth receivers can be accepted. The signals are then transmitted to the distant end. The maximum bit rate of the 23 mm x 30 mm module is 73.5 kBit/s. At 4.7 kBit/s, the current consumption is 12 mA.

Performance test of different 3.5 mm drill bits and consequences for orthopaedic surgery.

PubMed

Clement, Hans; Zopf, Christoph; Brandner, Markus; Tesch, Norbert P; Vallant, Rudolf; Puchwein, Paul

2015-12-01

Drilling of bones in orthopaedic and trauma surgery is a common procedure. There are yet no recommendations about which drill bits/coating should be preferred and when to change a used drill bit. In preliminary studies typical "drilling patterns" of surgeons concerning used spindle speed and feeding force were recorded. Different feeding forces were tested and abrasion was analysed using magnification and a scanning electron microscope (SEM). Acquired data were used for programming a friction stir welding machine (FSWM). Four drill bits (a default AISI 440A, a HSS, an AISI 440B and a Zirconium-oxide drill bit) were analysed for abrasive wear after 20/40/60 machine-guided and hand-driven drilled holes. Additionally different drill coatings [diamond-like carbon/grafitic (DLC), titanium nitride/carbide (Ti-N)] were tested. The mean applied feeding force by surgeons was 45 ± 15.6 Newton (N). HSS bits were still usable after 51 drill holes. Both coated AISI 440A bits showed considerable breakouts of the main cutting edge after 20 hand-driven drilled holes. The coated HSS bit showed very low abrasive wear. The non-coated AISI 440B bit had a similar durability to the HSS bits. The ZrO2 dental drill bit excelled its competitors (no considerable abrasive wear at >100 holes). If the default AISI 440A drill bit cannot be checked by 20-30× magnification after surgery, it should be replaced after 20 hand-driven drilled holes. Low price coated HSS bits could be a powerful alternative.

Inadvertently programmed bits in Samsung 128 Mbit flash devices: a flaky investigation

NASA Technical Reports Server (NTRS)

Swift, G.

2002-01-01

JPL's X2000 avionics design pioneers new territory by specifying a non-volatile memory (NVM) board based on flash memories. The Samsung 128Mb device chosen was found to demonstrate bit errors (mostly program disturbs) and block-erase failures that increase with cycling. Low temperature, certain pseudo- random patterns, and, probably, higher bias increase the observable bit errors. An experiment was conducted to determine the wearout dependence of the bit errors to 100k cycles at cold temperature using flight-lot devices (some pre-irradiated). The results show an exponential growth rate, a wide part-to-part variation, and some annealing behavior.

"Ask Argonne" - Robert Jacob, Climate Scientist, Part 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jacob, Robert

Previously, climate scientist Robert Jacob talked a bit about the work he does and invited questions from the public during Part 1 of his "Ask Argonne" video set (http://bit.ly/1aK6WDv). In Part 2, he answers some of the questions that were submitted.

"Ask Argonne" - Robert Jacob, Climate Scientist, Part 2

ScienceCinema

Jacob, Robert

2018-02-07

Previously, climate scientist Robert Jacob talked a bit about the work he does and invited questions from the public during Part 1 of his "Ask Argonne" video set (http://bit.ly/1aK6WDv). In Part 2, he answers some of the questions that were submitted.

0.25-μm lithography using a 50-kV shaped electron-beam vector scan system

NASA Astrophysics Data System (ADS)

Gesley, Mark A.; Mulera, Terry; Nurmi, C.; Radley, J.; Sagle, Allan L.; Standiford, Keith P.; Tan, Zoilo C. H.; Thomas, John R.; Veneklasen, Lee

1995-05-01

Performance data from a prototype 50 kV shaped electron-beam (e-beam) pattern generator is presented. This technology development is targeted towards 180-130 nm device design rules. It will be able to handle 1X NIST X-ray membranes, glass reduction reticles, and 4- to 8-inch wafers. The prototype system uses a planar stage adapted from the IBM EL-4 design. The electron optics is an 50 kV extension of the AEBLE%+TM) design. Lines and spaces of 0.12 micrometers with < 40 nm corner radius are resolved in 0.4 micrometers thick resist at 50 kV. This evolutionary platform will evolve further to include a new 100 kV column with telecentric deflection and a 21-bit (0.5 mm) major field for improved placement accuracy. A unique immersion shaper, faster data path electronics, and 15-bit (32 micrometers ) minor field deflection electronics will substantially increase the flash rate. To match its much finer address structure, the pattern generator figure word size will increase from 80 to 96 bits. The data path electronics uses field programmable gate array (FPGA) logic allowing writing strategy optimization via software reconfiguration. An advanced stage position control (ASPC) includes three-axis, (lambda) /1024 interferometry and a high bandwidth dynamic corrections processor (DCP). Along with its normal role of coordinate transformation and dynamic correction of deflection distortion, astigmatism, and defocus; the DCP improves accuracy by modifying deflection conditions and focus according to measured substrate height variations. It also enables yaw calibration and correction for Write-on-the FlyTM motion. The electronics incorporates JTAG components for built-in self- test (BIST), as well as syndrome checking to ensure data integrity. The design includes diagnostic capabilities from offsite as well as from the operator console. A combination of third-party software and an internal job preparation software system is used to fracture patterns. It handles tone reversal, overlap removal, sizing, and proximity correction. Processing of large files in a commercial mask shop environment is made more efficient by retaining hierarchy and using parallel processing and data compression techniques. Large GDSIITM and MEBES data files can be processed. Data includes timing benchmarks for a 1 Gbit DRAM on both proximity and reduction reticles. The paper presents 50 kV results on silicon and quartz substrates along with examples of overlay to an external grid, field butting, and critical dimension (CD) control data. Selective experiments testing system stability, calibration accuracy, and local correction software implementation on a VAX control computer are also given.

Neurologic outcomes of toxic oil syndrome patients 18 years after the epidemic.

PubMed Central

de la Paz, Manuel Posada; Philen, Rossanne M; Gerr, Fredric; Letz, Richard; Ferrari Arroyo, Maria José; Vela, Lydia; Izquierdo, Maravillas; Arribas, Concepción Martín; Borda, Ignacio Abaitua; Ramos, Alejandro; Mora, Cristina; Matesanz, Gloria; Roldán, Maria Teresa; Pareja, Juan

2003-01-01

Toxic oil syndrome (TOS) resulted from consumption of rapeseed oil denatured with 2% aniline and affected more than 20,000 persons. Eighteen years after the epidemic, many patients continue to report neurologic symptoms that are difficult to evaluate using conventional techniques. We conducted an epidemiologic study to determine whether an exposure to toxic oil 18 years ago was associated with current adverse neurobehavioral effects. We studied a case group of 80 adults exposed to toxic oil 18 years ago and a referent group of 79 adult age- and sex-frequency-matched unexposed subjects. We interviewed subjects for demographics, health status, exposures to neurotoxicants, and responses to the Kaufman Brief Intelligence Test (K-BIT), Programa Integrado de Exploracion Neuropsicologica (PIEN), and Goldberg depression questionnaires and administered quantitative neurobehavioral and neurophysiologic tests by computer or trained nurses. The groups did not differ with respect to educational background or other critical variables. We examined associations between case and referent groups and the neurobehavioral and neurophysiologic outcomes of interest. Decreased distal strength of the dominant and nondominant hands and increased vibrotactile thresholds of the fingers and toes were significantly associated with exposure to toxic oil. Finger tapping, simple reaction time latency, sequence B latency, symbol digit latency, and auditory digit span were also significantly associated with exposure. Case subjects also had statistically significantly more neuropsychologic symptoms compared with referents. Using quantitative neurologic tests, we found significant adverse central and peripheral neurologic effects in a group of TOS patients 18 years after exposure to toxic oil when compared with a nonexposed referent group. These effects were not documented by standard clinical examination and were found more frequently in women. PMID:12896854

Neurologic outcomes of toxic oil syndrome patients 18 years after the epidemic.

PubMed

de la Paz, Manuel Posada; Philen, Rossanne M; Gerr, Fredric; Letz, Richard; Ferrari Arroyo, Maria José; Vela, Lydia; Izquierdo, Maravillas; Arribas, Concepción Martín; Borda, Ignacio Abaitua; Ramos, Alejandro; Mora, Cristina; Matesanz, Gloria; Roldán, Maria Teresa; Pareja, Juan

2003-08-01

Toxic oil syndrome (TOS) resulted from consumption of rapeseed oil denatured with 2% aniline and affected more than 20,000 persons. Eighteen years after the epidemic, many patients continue to report neurologic symptoms that are difficult to evaluate using conventional techniques. We conducted an epidemiologic study to determine whether an exposure to toxic oil 18 years ago was associated with current adverse neurobehavioral effects. We studied a case group of 80 adults exposed to toxic oil 18 years ago and a referent group of 79 adult age- and sex-frequency-matched unexposed subjects. We interviewed subjects for demographics, health status, exposures to neurotoxicants, and responses to the Kaufman Brief Intelligence Test (K-BIT), Programa Integrado de Exploracion Neuropsicologica (PIEN), and Goldberg depression questionnaires and administered quantitative neurobehavioral and neurophysiologic tests by computer or trained nurses. The groups did not differ with respect to educational background or other critical variables. We examined associations between case and referent groups and the neurobehavioral and neurophysiologic outcomes of interest. Decreased distal strength of the dominant and nondominant hands and increased vibrotactile thresholds of the fingers and toes were significantly associated with exposure to toxic oil. Finger tapping, simple reaction time latency, sequence B latency, symbol digit latency, and auditory digit span were also significantly associated with exposure. Case subjects also had statistically significantly more neuropsychologic symptoms compared with referents. Using quantitative neurologic tests, we found significant adverse central and peripheral neurologic effects in a group of TOS patients 18 years after exposure to toxic oil when compared with a nonexposed referent group. These effects were not documented by standard clinical examination and were found more frequently in women.

Years after Inventors Die, Royalties Are Pennies from Heaven

ERIC Educational Resources Information Center

Blumenstyk, Goldie

2009-01-01

Sarah L. Kieweg had her own nice surprise when the University of Central Florida contacted her. She understood quite a bit about her father's pioneering work on artificial intelligence in the 1990s. Still, in 2006, eight years after he died of a heart attack, at age 50, the call from the university came out of the blue: some of James R. Driscoll's…

Proceedings of the Annual Conference of the Military Testing Association Held in San Diego, California on 26-29 October 1992. Volume 2

DTIC Science & Technology

1992-10-29

Blend engine stator vane K 620 Inspect engines removed from storag G 253 Blend engine turbine air seals K 621 Inspect fuel manifold test stands * 254...Assessment and Human Learning Skills G. F Fullerton D. P. Hunt 497 How Personnel Testing is Adapting to a Changing Air Force T S. Ziebell 503 Problems of...of Intelligence Among Navy and Air Force Personnel R. F Dillon 526 Session 25 Measuring Martial Attitudes: The Military Ethos Scale (MES) in Retrcspect

ACS Science Data Buffer Check/Self-Tests for CS Buffer RAM and MIE RAM

NASA Astrophysics Data System (ADS)

Balzano, V.

2001-07-01

The ACS Science Buffer RAM is checked for bit flips during SAA passages. This is followed by a Control Section {CS} self-test consisting of writing/reading a specified bit pattern from each memory location in Buffer RAM and a similar test for MIE RAM. The MIE must be placed in BOOT mode for its self-test. The CS Buffer RAM self-test as well as the bit flip tests are all done with the CS in Operate.

COS Side 2 Science Data Buffer Check/Self-Tests for CS Buffer RAM and DIB RAM

NASA Astrophysics Data System (ADS)

Bacinski, John

2013-10-01

The COS Science Buffer RAM is checked for bit flips during SAA passages. This is followed by a Control Section {CS} self-test consisting of writing/reading a specified bit pattern from each memory location in Buffer RAM and a similar test for DIB RAM. The DIB must be placed in BOOT mode for its self-test. The CS Buffer RAM self-test as well as the bit flip tests are all done with the CS in Operate.

ACS Science Data Buffer Check/Self-Tests for CS Buffer RAM and MIE RAM

NASA Astrophysics Data System (ADS)

Welty, Alan

2005-07-01

The ACS Science Buffer RAM is checked for bit flips during SAA passages. Thisis followed by a Control Section {CS} self-test consisting of writing/reading a specified bit pattern from each memory location in Buffer RAM and a similar test for MIE RAM. The MIE must be placed in BOOT mode for its self-test. The CS Buffer RAM self-test as well as the bit flip tests are all done with the CS in Operate.

TriBITS (Tribal Build, Integrate, and Test System)

DOE Office of Scientific and Technical Information (OSTI.GOV)

2013-05-16

TriBITS is a configuration, build, test, and reporting system that uses the Kitware open-source CMake/CTest/CDash system. TriBITS contains a number of custom CMake/CTest scripts and python scripts that extend the functionality of the out-of-the-box CMake/CTest/CDash system.

Seismic Surveillance. Nuclear Test Ban Verification

DTIC Science & Technology

1990-02-26

e.g., see Matthews and Cheadle, 1986). To summarize, data processing tied to 8 msec sampling is a bit coarse for the sedimentary column but...Continental Extensional Tectonics. Geological Society Special Publication No. 28, 53-65. Matthews , D.H. and Cheadle, M.J. 1986: Deep Reflections from the...Laboratory P. 0. Box 73 P.O. Box 1620 Lexington, MA 02173-0073 (3 copies) La Jolla, CA 92038-1620 Prof Fred K. Lamb Prof. William Menke University of

Fastener Recess Evaluation

DTIC Science & Technology

1978-04-01

lbs respectively. The Torx recess suffered most under the test methods adopted (as would any similar recess such as the internal hex). Zero values ...Administrationi, National Tool Center Apex Machine and Tool Co. r~. Phillips International Co.] Hi-Shear Corp. General Dynamics Corp. Defense Logistics Agency...29 6. Undersized Bits 30 7. Worn Bit Test 31 8. Stock Bit and Screw Comparison 32 9. Ribbed Bits 36 V FIELD DATA OBSERVATIONS 38 1. Torque Values 38 2

Image steganography based on 2k correction and coherent bit length

NASA Astrophysics Data System (ADS)

Sun, Shuliang; Guo, Yongning

2014-10-01

In this paper, a novel algorithm is proposed. Firstly, the edge of cover image is detected with Canny operator and secret data is embedded in edge pixels. Sorting method is used to randomize the edge pixels in order to enhance security. Coherent bit length L is determined by relevant edge pixels. Finally, the method of 2k correction is applied to achieve better imperceptibility in stego image. The experiment shows that the proposed method is better than LSB-3 and Jae-Gil Yu's in PSNR and capacity.

Hearing loss is associated with decreased nonverbal intelligence in rural Nepal.

PubMed

Emmett, Susan D; Schmitz, Jane; Pillion, Joseph; Wu, Lee; Khatry, Subarna K; Karna, Sureshwar L; LeClerq, Steven C; West, Keith P

2015-01-01

To evaluate the association between adolescent and young-adult hearing loss and nonverbal intelligence in rural Nepal. Cross-sectional assessment of hearing loss among a population cohort of adolescents and young adults. Sarlahi District, southern Nepal. Seven hundred sixty-four individuals aged 14 to 23 years. Evaluation of hearing loss, defined by World Health Organization criteria of pure-tone average greater than 25 decibels (0.5, 1, 2, 4 kHz), unilaterally and bilaterally. Nonverbal intelligence, as measured by the Test of Nonverbal Intelligence, 3rd Edition standardized score (mean, 100; standard deviation, 15). Nonverbal intelligence scores differed between participants with normal hearing and those with bilateral (p = 0.04) but not unilateral (p = 0.74) hearing loss. Demographic and socioeconomic factors including male sex; higher caste; literacy; education level; occupation reported as student; and ownership of a bicycle, watch, and latrine were strongly associated with higher nonverbal intelligence scores (all p < 0.001). Subjects with bilateral hearing loss scored an average of 3.16 points lower (95% confidence interval, -5.56 to -0.75; p = 0.01) than subjects with normal hearing after controlling for socioeconomic factors. There was no difference in nonverbal intelligence score based on unilateral hearing loss (0.97; 95% confidence interval, -1.67 to 3.61; p = 0.47). Nonverbal intelligence is adversely affected by bilateral hearing loss even at mild hearing loss levels. Socio economic well-being appears compromised in individuals with lower nonverbal intelligence test scores.

Hearing Loss is Associated with Decreased Nonverbal Intelligence in Rural Nepal

PubMed Central

Emmett, Susan D.; Schmitz, Jane; Pillion, Joseph; Wu, Lee; Khatry, Subarna K.; Karna, Sureshwar L.; LeClerq, Steven C.; West, Keith P.

2014-01-01

Objective Evaluate the association between adolescent and young adult hearing loss and nonverbal intelligence in rural Nepal Study Design Cross-sectional assessment of hearing loss among a population cohort of adolescents and young adults Setting Sarlahi District, southern Nepal Patients 764 individuals aged 14–23 years Intervention Evaluation of hearing loss, defined by WHO criteria of pure-tone average (PTA) >25 decibels (0.5, 1, 2, 4 kHz), unilaterally and bilaterally Main Outcome Measure Nonverbal intelligence, measured by the Test of Nonverbal Intelligence, 3rd Edition (TONI-3) standardized score (mean 100; standard deviation (SD) 15) Results Nonverbal intelligence scores differed between participants with normal hearing and those with bilateral (p =0.04) but not unilateral (p =0.74) hearing loss. Demographic and socioeconomic factors including male sex, higher caste, literacy, education level, occupation reported as student, and ownership of a bicycle, watch, and latrine were strongly associated with higher nonverbal intelligence scores (all p <0.001). Subjects with bilateral hearing loss scored an average of 3.16 points lower (95% CI: −5.56, −0.75; p =0.01) than subjects with normal hearing after controlling for socioeconomic factors. There was no difference in nonverbal intelligence score based on unilateral hearing loss (0.97; 95% CI: −1.67, 3.61; p =0.47). Conclusions Nonverbal intelligence is adversely affected by bilateral hearing loss, even at mild hearing loss levels. Social and economic well being appear compromised in individuals with lower nonverbal intelligence test scores. PMID:25299832

Rounding Technique for High-Speed Digital Signal Processing

NASA Technical Reports Server (NTRS)

Wechsler, E. R.

1983-01-01

Arithmetic technique facilitates high-speed rounding of 2's complement binary data. Conventional rounding of 2's complement numbers presents problems in high-speed digital circuits. Proposed technique consists of truncating K + 1 bits then attaching bit in least significant position. Mean output error is zero, eliminating introducing voltage offset at input.

Security for a Smarter Planet

NASA Astrophysics Data System (ADS)

Nagaratnam, Nataraj

Bit by bit, our planet is getting smarter. By this, we mean the systems that run, the way we live and work as a society. Three things have brought this about - the world is becoming instrumented, interconnected and intelligent. Given the planet is becoming instrumented and interconnected, this opens up more risks that need to be managed. Escalating security and privacy concerns along with a renewed focus on organizational oversight are driving governance, risk management and compliance (GRC) to the forefront of the business. Compliance regulations have increasingly played a larger role by attempting to establish processes and controls that mitigate the internal and external risks organizations have today. To effectively meet the requirements of GRC, companies must prove that they have strong and consistent controls over who has access to critical applications and data.

Learning by Reading for Robust Reasoning in Intelligent Agents

DTIC Science & Technology

2018-04-24

SUPPLEMENTARY NOTES 14. ABSTRACT Our hypotheses are that analogical processing plays multiple roles in enabling machines to learn by reading, and that...systems). Our overall hypotheses are that analogical processing plays multiple roles in learning by reading, and that qualitative representations provide...from reading this text? Narrative function can be seen as a kind of communication act, but the idea goes a bit beyond that. Communication acts are

The PASM Parallel Processing System: Hardware Design and Intelligent Operating System Concepts

DTIC Science & Technology

1986-07-01

IND-3 Jac Logic 0ISCAUTO-3 UK Jus Parallel IrAorf act Pori 90-7 el MS. IND-3 P110-3 Logic = .CUTO-3 AC-4 0 Sow PAIS WK.110-7 --------- CSS CC. THO...process communication are part of the ment, which must be part of the task body: jitsu VP-20043 uses 32-bit integers. Pro- language. The compiler actually

COS Science Data Buffer Check/Self-Tests for CS Buffer RAM and DIB RAM

NASA Astrophysics Data System (ADS)

Welty, Alan

2009-07-01

The COS Science Buffer RAM is checked for bit flips during SAA passages. This is followed by a Control Section {CS} self-test consisting of writing/reading a specified bit pattern from each memory location in Buffer RAM and a similar test for DIB RAM. The DIB must be placed in BOOT mode for its self-test. The CS Buffer RAM self-test as well as the bit flip tests are all done with the CS in Operate.Supports Activity COS-03

Optimization of Deep Drilling Performance - Development and Benchmark Testing of Advanced Diamond Product Drill Bits & HP/HT Fluids to Significantly Improve Rates of Penetration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alan Black; Arnis Judzis

2005-09-30

This document details the progress to date on the OPTIMIZATION OF DEEP DRILLING PERFORMANCE--DEVELOPMENT AND BENCHMARK TESTING OF ADVANCED DIAMOND PRODUCT DRILL BITS AND HP/HT FLUIDS TO SIGNIFICANTLY IMPROVE RATES OF PENETRATION contract for the year starting October 2004 through September 2005. The industry cost shared program aims to benchmark drilling rates of penetration in selected simulated deep formations and to significantly improve ROP through a team development of aggressive diamond product drill bit--fluid system technologies. Overall the objectives are as follows: Phase 1--Benchmark ''best in class'' diamond and other product drilling bits and fluids and develop concepts for amore » next level of deep drilling performance; Phase 2--Develop advanced smart bit-fluid prototypes and test at large scale; and Phase 3--Field trial smart bit--fluid concepts, modify as necessary and commercialize products. As of report date, TerraTek has concluded all Phase 1 testing and is planning Phase 2 development.« less

Development of the Low-cost Analog-to-Digital Converter (for nuclear physics experiments) with PC sound card

NASA Astrophysics Data System (ADS)

Sugihara, Kenkoh

2009-10-01

A low-cost ADC (Analogue-to-Digital Converter) with shaping embedded for undergraduate physics laboratory is developed using a home made circuit and a PC sound card. Even though an ADC is needed as an essential part of an experimental set up, commercially available ones are very expensive and are scarce for undergraduate laboratory experiments. The system that is developed from the present work is designed for a gamma-ray spectroscopy laboratory with NaI(Tl) counters, but not limited. For this purpose, the system performance is set to sampling rate of 1-kHz with 10-bit resolution using a typical PC sound card with 41-kHz or higher sampling rate and 16-bit resolution ADC with an addition of a shaping circuit. Details of the system and the status of development will be presented. Ping circuit and PC soundcard as typical PC sound card has 41.1kHz or heiger sampling rate and 16bit resolution ADCs. In the conference details of the system and the status of development will be presented.

A bandwidth efficient coding scheme for the Hubble Space Telescope

NASA Technical Reports Server (NTRS)

Pietrobon, Steven S.; Costello, Daniel J., Jr.

1991-01-01

As a demonstration of the performance capabilities of trellis codes using multidimensional signal sets, a Viterbi decoder was designed. The choice of code was based on two factors. The first factor was its application as a possible replacement for the coding scheme currently used on the Hubble Space Telescope (HST). The HST at present uses the rate 1/3 nu = 6 (with 2 (exp nu) = 64 states) convolutional code with Binary Phase Shift Keying (BPSK) modulation. With the modulator restricted to a 3 Msym/s, this implies a data rate of only 1 Mbit/s, since the bandwidth efficiency K = 1/3 bit/sym. This is a very bandwidth inefficient scheme, although the system has the advantage of simplicity and large coding gain. The basic requirement from NASA was for a scheme that has as large a K as possible. Since a satellite channel was being used, 8PSK modulation was selected. This allows a K of between 2 and 3 bit/sym. The next influencing factor was INTELSAT's intention of transmitting the SONET 155.52 Mbit/s standard data rate over the 72 MHz transponders on its satellites. This requires a bandwidth efficiency of around 2.5 bit/sym. A Reed-Solomon block code is used as an outer code to give very low bit error rates (BER). A 16 state rate 5/6, 2.5 bit/sym, 4D-8PSK trellis code was selected. This code has reasonable complexity and has a coding gain of 4.8 dB compared to uncoded 8PSK (2). This trellis code also has the advantage that it is 45 deg rotationally invariant. This means that the decoder needs only to synchronize to one of the two naturally mapped 8PSK signals in the signal set.

Speech intelligibility and speech quality of modified loudspeaker announcements examined in a simulated aircraft cabin.

PubMed

Pennig, Sibylle; Quehl, Julia; Wittkowski, Martin

2014-01-01

Acoustic modifications of loudspeaker announcements were investigated in a simulated aircraft cabin to improve passengers' speech intelligibility and quality of communication in this specific setting. Four experiments with 278 participants in total were conducted in an acoustic laboratory using a standardised speech test and subjective rating scales. In experiments 1 and 2 the sound pressure level (SPL) of the announcements was varied (ranging from 70 to 85 dB(A)). Experiments 3 and 4 focused on frequency modification (octave bands) of the announcements. All studies used a background noise with the same SPL (74 dB(A)), but recorded at different seat positions in the aircraft cabin (front, rear). The results quantify speech intelligibility improvements with increasing signal-to-noise ratio and amplification of particular octave bands, especially the 2 kHz and the 4 kHz band. Thus, loudspeaker power in an aircraft cabin can be reduced by using appropriate filter settings in the loudspeaker system.

Health-related quality of life and cognitive functioning at on- and off-treatment periods in children aged between 6-13 years old with brain tumors: a prospective longitudinal study.

PubMed

An, Kyung Jin; Joung, Yoo Sook; Sung, Ki Woong; Kim, Ji-Hae

2013-03-01

Our study aimed to examine the relationship between intelligence and health-related quality of life (HRQOL) in children (6-13 years old) diagnosed as having a brain tumor. We administered a Korean version of the Wechsler Intelligence Scale for Children-III, the Pediatric Quality of Life Inventory, version 4.0 (PedsQL), the Korean version of the Parenting Stress Index-Short Form, and the Korean Version of the Parenting Sense of Competence (K-PSOC) scale before or after initial radiotherapy (T1) and after treatment termination (T2). In total, 13 patients completed both the T1 and T2 interviews. Scores significantly declined between T1 and T2 on the full-scale intelligence quotients (FIQ), verbal intelligence quotients (VIQ), performance intelligence quotients (PIQ), similarity and coding tests, as well as the K-PSOC, which measures parental anxiety. FIQ scores at T1 were correlated with the self-reported PedsQL total scores (r=0.739) and the parent proxy-report PedsQL scores for school functioning (r=0.706) at T2. Also, the FIQ scores at T2 were correlated with the self-reported PedsQL total scores (r=0.748) and scores for physical health (r=0.728) at T2. The cognitive ability and intelligence level of the patients significantly declined between on and off treatment periods, and higher intelligence functioning at both on and off treatment was correlated with long-term higher HRQOL. Further investigations that monitor intelligence, HRQOL and parenting stress over a longer period, using a greater number of participants, are needed.

Method for characterizing the upset response of CMOS circuits using alpha-particle sensitive test circuits

NASA Technical Reports Server (NTRS)

Buehler, Martin G. (Inventor); Nixon, Robert H. (Inventor); Soli, George A. (Inventor); Blaes, Brent R. (Inventor)

1995-01-01

A method for predicting the SEU susceptibility of a standard-cell D-latch using an alpha-particle sensitive SRAM, SPICE critical charge simulation results, and alpha-particle interaction physics. A technique utilizing test structures to quickly and inexpensively characterize the SEU sensitivity of standard cell latches intended for use in a space environment. This bench-level approach utilizes alpha particles to induce upsets in a low LET sensitive 4-k bit test SRAM. This SRAM consists of cells that employ an offset voltage to adjust their upset sensitivity and an enlarged sensitive drain junction to enhance the cell's upset rate.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reed, D.A.; Grunwald, D.C.

The spectrum of parallel processor designs can be divided into three sections according to the number and complexity of the processors. At one end there are simple, bit-serial processors. Any one of thee processors is of little value, but when it is coupled with many others, the aggregate computing power can be large. This approach to parallel processing can be likened to a colony of termites devouring a log. The most notable examples of this approach are the NASA/Goodyear Massively Parallel Processor, which has 16K one-bit processors, and the Thinking Machines Connection Machine, which has 64K one-bit processors. At themore » other end of the spectrum, a small number of processors, each built using the fastest available technology and the most sophisticated architecture, are combined. An example of this approach is the Cray X-MP. This type of parallel processing is akin to four woodmen attacking the log with chainsaws.« less

Decoding of DBEC-TBED Reed-Solomon codes. [Double-Byte-Error-Correcting, Triple-Byte-Error-Detecting

NASA Technical Reports Server (NTRS)

Deng, Robert H.; Costello, Daniel J., Jr.

1987-01-01

A problem in designing semiconductor memories is to provide some measure of error control without requiring excessive coding overhead or decoding time. In LSI and VLSI technology, memories are often organized on a multiple bit (or byte) per chip basis. For example, some 256 K bit DRAM's are organized in 32 K x 8 bit-bytes. Byte-oriented codes such as Reed-Solomon (RS) codes can provide efficient low overhead error control for such memories. However, the standard iterative algorithm for decoding RS codes is too slow for these applications. The paper presents a special decoding technique for double-byte-error-correcting, triple-byte-error-detecting RS codes which is capable of high-speed operation. This technique is designed to find the error locations and the error values directly from the syndrome without having to use the iterative algorithm to find the error locator polynomial.

Optimization of Mud Hammer Drilling Performance--A Program to Benchmark the Viability of Advanced Mud Hammer Drilling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arnis Judzis

2006-03-01

Operators continue to look for ways to improve hard rock drilling performance through emerging technologies. A consortium of Department of Energy, operator and industry participants put together an effort to test and optimize mud driven fluid hammers as one emerging technology that has shown promise to increase penetration rates in hard rock. The thrust of this program has been to test and record the performance of fluid hammers in full scale test conditions including, hard formations at simulated depth, high density/high solids drilling muds, and realistic fluid power levels. This paper details the testing and results of testing two 7more » 3/4 inch diameter mud hammers with 8 1/2 inch hammer bits. A Novatek MHN5 and an SDS Digger FH185 mud hammer were tested with several bit types, with performance being compared to a conventional (IADC Code 537) tricone bit. These tools functionally operated in all of the simulated downhole environments. The performance was in the range of the baseline ticone or better at lower borehole pressures, but at higher borehole pressures the performance was in the lower range or below that of the baseline tricone bit. A new drilling mode was observed, while operating the MHN5 mud hammer. This mode was noticed as the weight on bit (WOB) was in transition from low to high applied load. During this new ''transition drilling mode'', performance was substantially improved and in some cases outperformed the tricone bit. Improvements were noted for the SDS tool while drilling with a more aggressive bit design. Future work includes the optimization of these or the next generation tools for operating in higher density and higher borehole pressure conditions and improving bit design and technology based on the knowledge gained from this test program.« less

Smaller Footprint Drilling System for Deep and Hard Rock Environments; Feasibility of Ultra-High-Speed Diamond Drilling

DOE Office of Scientific and Technical Information (OSTI.GOV)

TerraTek, A Schlumberger Company

2008-12-31

The two phase program addresses long-term developments in deep well and hard rock drilling. TerraTek believes that significant improvements in drilling deep hard rock will be obtained by applying ultra-high rotational speeds (greater than 10,000 rpm). The work includes a feasibility of concept research effort aimed at development that will ultimately result in the ability to reliably drill 'faster and deeper' possibly with smaller, more mobile rigs. The principle focus is on demonstration testing of diamond bits rotating at speeds in excess of 10,000 rpm to achieve high rate of penetration (ROP) rock cutting with substantially lower inputs of energymore » and loads. The significance of the 'ultra-high rotary speed drilling system' is the ability to drill into rock at very low weights on bit and possibly lower energy levels. The drilling and coring industry today does not practice this technology. The highest rotary speed systems in oil field and mining drilling and coring today run less than 10,000 rpm - usually well below 5,000 rpm. This document provides the progress through two phases of the program entitled 'Smaller Footprint Drilling System for Deep and Hard Rock Environments: Feasibility of Ultra-High-Speed Diamond Drilling' for the period starting 30 June 2003 and concluding 31 March 2009. The accomplishments of Phases 1 and 2 are summarized as follows: (1) TerraTek reviewed applicable literature and documentation and convened a project kick-off meeting with Industry Advisors in attendance (see Black and Judzis); (2) TerraTek designed and planned Phase I bench scale experiments (See Black and Judzis). Improvements were made to the loading mechanism and the rotational speed monitoring instrumentation. New drill bit designs were developed to provided a more consistent product with consistent performance. A test matrix for the final core bit testing program was completed; (3) TerraTek concluded small-scale cutting performance tests; (4) Analysis of Phase 1 data indicated that there is decreased specific energy as the rotational speed increases; (5) Technology transfer, as part of Phase 1, was accomplished with technical presentations to the industry (see Judzis, Boucher, McCammon, and Black); (6) TerraTek prepared a design concept for the high speed drilling test stand, which was planned around the proposed high speed mud motor concept. Alternative drives for the test stand were explored; a high speed hydraulic motor concept was finally used; (7) The high speed system was modified to accommodate larger drill bits than originally planned; (8) Prototype mud turbine motors and the high speed test stand were used to drive the drill bits at high speed; (9) Three different rock types were used during the testing: Sierra White granite, Crab Orchard sandstone, and Colton sandstone. The drill bits used included diamond impregnated bits, a polycrystalline diamond compact (PDC) bit, a thermally stable PDC (TSP) bit, and a hybrid TSP and natural diamond bit; and (10) The drill bits were run at rotary speeds up to 5500 rpm and weight on bit (WOB) to 8000 lbf. During Phase 2, the ROP as measured in depth of cut per bit revolution generally increased with increased WOB. The performance was mixed with increased rotary speed, with the depth cut with the impregnated drill bit generally increasing and the TSP and hybrid TSP drill bits generally decreasing. The ROP in ft/hr generally increased with all bits with increased WOB and rotary speed. The mechanical specific energy generally improved (decreased) with increased WOB and was mixed with increased rotary speed.« less

Artificial intelligence techniques applied to the development of a decision–support system for diagnosing celiac disease

PubMed Central

Tenório, Josceli Maria; Hummel, Anderson Diniz; Cohrs, Frederico Molina; Sdepanian, Vera Lucia; Pisa, Ivan Torres; de Fátima Marin, Heimar

2013-01-01

Background Celiac disease (CD) is a difficult-to-diagnose condition because of its multiple clinical presentations and symptoms shared with other diseases. Gold-standard diagnostic confirmation of suspected CD is achieved by biopsying the small intestine. Objective To develop a clinical decision–support system (CDSS) integrated with an automated classifier to recognize CD cases, by selecting from experimental models developed using intelligence artificial techniques. Methods A web-based system was designed for constructing a retrospective database that included 178 clinical cases for training. Tests were run on 270 automated classifiers available in Weka 3.6.1 using five artificial intelligence techniques, namely decision trees, Bayesian inference, k-nearest neighbor algorithm, support vector machines and artificial neural networks. The parameters evaluated were accuracy, sensitivity, specificity and area under the ROC curve (AUC). AUC was used as a criterion for selecting the CDSS algorithm. A testing database was constructed including 38 clinical CD cases for CDSS evaluation. The diagnoses suggested by CDSS were compared with those made by physicians during patient consultations. Results The most accurate method during the training phase was the averaged one-dependence estimator (AODE) algorithm (a Bayesian classifier), which showed accuracy 80.0%, sensitivity 0.78, specificity 0.80 and AUC 0.84. This classifier was integrated into the web-based decision–support system. The gold-standard validation of CDSS achieved accuracy of 84.2% and k = 0.68 (p < 0.0001) with good agreement. The same accuracy was achieved in the comparison between the physician’s diagnostic impression and the gold standard k = 0. 64 (p < 0.0001). There was moderate agreement between the physician’s diagnostic impression and CDSS k = 0.46 (p = 0.0008). Conclusions The study results suggest that CDSS could be used to help in diagnosing CD, since the algorithm tested achieved excellent accuracy in differentiating possible positive from negative CD diagnoses. This study may contribute towards developing of a computer-assisted environment to support CD diagnosis. PMID:21917512

Artificial intelligence techniques applied to the development of a decision-support system for diagnosing celiac disease.

PubMed

Tenório, Josceli Maria; Hummel, Anderson Diniz; Cohrs, Frederico Molina; Sdepanian, Vera Lucia; Pisa, Ivan Torres; de Fátima Marin, Heimar

2011-11-01

Celiac disease (CD) is a difficult-to-diagnose condition because of its multiple clinical presentations and symptoms shared with other diseases. Gold-standard diagnostic confirmation of suspected CD is achieved by biopsying the small intestine. To develop a clinical decision-support system (CDSS) integrated with an automated classifier to recognize CD cases, by selecting from experimental models developed using intelligence artificial techniques. A web-based system was designed for constructing a retrospective database that included 178 clinical cases for training. Tests were run on 270 automated classifiers available in Weka 3.6.1 using five artificial intelligence techniques, namely decision trees, Bayesian inference, k-nearest neighbor algorithm, support vector machines and artificial neural networks. The parameters evaluated were accuracy, sensitivity, specificity and area under the ROC curve (AUC). AUC was used as a criterion for selecting the CDSS algorithm. A testing database was constructed including 38 clinical CD cases for CDSS evaluation. The diagnoses suggested by CDSS were compared with those made by physicians during patient consultations. The most accurate method during the training phase was the averaged one-dependence estimator (AODE) algorithm (a Bayesian classifier), which showed accuracy 80.0%, sensitivity 0.78, specificity 0.80 and AUC 0.84. This classifier was integrated into the web-based decision-support system. The gold-standard validation of CDSS achieved accuracy of 84.2% and k=0.68 (p<0.0001) with good agreement. The same accuracy was achieved in the comparison between the physician's diagnostic impression and the gold standard k=0. 64 (p<0.0001). There was moderate agreement between the physician's diagnostic impression and CDSS k=0.46 (p=0.0008). The study results suggest that CDSS could be used to help in diagnosing CD, since the algorithm tested achieved excellent accuracy in differentiating possible positive from negative CD diagnoses. This study may contribute towards developing of a computer-assisted environment to support CD diagnosis. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

An inexpensive digital tape recorder suitable for neurophysiological signals.

PubMed

Lamb, T D

1985-10-01

Modifications are described which convert an inexpensive 'Digital Audio Processor' (Sony PCM-701ES), together with a video cassette recorder, into a high performance digital tape recorder, with two analog channels of 16 bit resolution and DC-20 kHz bandwidth. A further modification is described which optionally provides four additional 1-bit digital channels by sacrificing the least significant four bits of one analog channel. If required two additional high quality analog channels may be obtained by use of one of the new video cassette recorders (such as the Sony SL-HF100) which incorporate a pair of FM tracks.

Summary of Professional Activities, Center for Intelligence and Special Programs. 1990

DTIC Science & Technology

1991-06-01

Interest History of Science American Society for Group on Information (U.K.) Non-Destructive Testing RetrievalCogtive Science Society American Society for...Apple Programmers and Information Systems Science Developers Association i 1990 Professional Summary of Societies Professional Activities History of Science Society

A Cross-Cultural Validation of the Sequential-Simultaneous Theory of Intelligence in Children.

ERIC Educational Resources Information Center

Moon, Soo-Back; McLean, James E.; Kaufman, Alan S.

2003-01-01

The Kaufman Assessment Battery for Children - Korean (K-ABC-K) was developed to assess the intelligence and achievement of preschool and school-aged Korean children. This study examined the validity of the Sequential Processing, Simultaneous Processing and Achievement scales of the K-ABC-K. The factor analyses provided strong support for the…

A Parametric Study for the Design of an Optimized Ultrasonic Percussive Planetary Drill Tool.

PubMed

Li, Xuan; Harkness, Patrick; Worrall, Kevin; Timoney, Ryan; Lucas, Margaret

2017-03-01

Traditional rotary drilling for planetary rock sampling, in situ analysis, and sample return are challenging because the axial force and holding torque requirements are not necessarily compatible with lightweight spacecraft architectures in low-gravity environments. This paper seeks to optimize an ultrasonic percussive drill tool to achieve rock penetration with lower reacted force requirements, with a strategic view toward building an ultrasonic planetary core drill (UPCD) device. The UPCD is a descendant of the ultrasonic/sonic driller/corer technique. In these concepts, a transducer and horn (typically resonant at around 20 kHz) are used to excite a toroidal free mass that oscillates chaotically between the horn tip and drill base at lower frequencies (generally between 10 Hz and 1 kHz). This creates a series of stress pulses that is transferred through the drill bit to the rock surface, and while the stress at the drill-bit tip/rock interface exceeds the compressive strength of the rock, it causes fractures that result in fragmentation of the rock. This facilitates augering and downward progress. In order to ensure that the drill-bit tip delivers the greatest effective impulse (the time integral of the drill-bit tip/rock pressure curve exceeding the strength of the rock), parameters such as the spring rates and the mass of the free mass, the drill bit and transducer have been varied and compared in both computer simulation and practical experiment. The most interesting findings and those of particular relevance to deep drilling indicate that increasing the mass of the drill bit has a limited (or even positive) influence on the rate of effective impulse delivered.

Optimization of Deep Drilling Performance--Development and Benchmark Testing of Advanced Diamond Product Drill Bits & HP/HT Fluids to Significantly Improve Rates of Penetration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alan Black; Arnis Judzis

2003-10-01

This document details the progress to date on the OPTIMIZATION OF DEEP DRILLING PERFORMANCE--DEVELOPMENT AND BENCHMARK TESTING OF ADVANCED DIAMOND PRODUCT DRILL BITS AND HP/HT FLUIDS TO SIGNIFICANTLY IMPROVE RATES OF PENETRATION contract for the year starting October 2002 through September 2002. The industry cost shared program aims to benchmark drilling rates of penetration in selected simulated deep formations and to significantly improve ROP through a team development of aggressive diamond product drill bit--fluid system technologies. Overall the objectives are as follows: Phase 1--Benchmark ''best in class'' diamond and other product drilling bits and fluids and develop concepts for amore » next level of deep drilling performance; Phase 2--Develop advanced smart bit--fluid prototypes and test at large scale; and Phase 3--Field trial smart bit--fluid concepts, modify as necessary and commercialize products. Accomplishments to date include the following: 4Q 2002--Project started; Industry Team was assembled; Kick-off meeting was held at DOE Morgantown; 1Q 2003--Engineering meeting was held at Hughes Christensen, The Woodlands Texas to prepare preliminary plans for development and testing and review equipment needs; Operators started sending information regarding their needs for deep drilling challenges and priorities for large-scale testing experimental matrix; Aramco joined the Industry Team as DEA 148 objectives paralleled the DOE project; 2Q 2003--Engineering and planning for high pressure drilling at TerraTek commenced; 3Q 2003--Continuation of engineering and design work for high pressure drilling at TerraTek; Baker Hughes INTEQ drilling Fluids and Hughes Christensen commence planning for Phase 1 testing--recommendations for bits and fluids.« less

Experimental Primer on the Trapped Ion Quantum Computer

DTIC Science & Technology

1998-01-01

analogously), then exposing this ion to a traveling- wave electric field E�r� � E0 cos �k rÿ wLt � j� with frequency wL, phase j, and wavevector k, results...eih�a�a y��ij � Sjÿ eÿih�a�a y�ÿij� �4� in a frame rotating at wL, where terms oscillating faster than W j �Wj wz; w0� have been neglected. Here, h...of the single bit rotation gate and the two-bit controlled-NOT gate [34]. For brevity, we concentrate on these two gates and how they can be

An Industry/DOE Program to Develop and Benchmark Advanced Diamond Product Drill Bits and HP/HT Drilling Fluids to Significantly Improve Rates of Penetration

DOE Office of Scientific and Technical Information (OSTI.GOV)

TerraTek

2007-06-30

A deep drilling research program titled 'An Industry/DOE Program to Develop and Benchmark Advanced Diamond Product Drill Bits and HP/HT Drilling Fluids to Significantly Improve Rates of Penetration' was conducted at TerraTek's Drilling and Completions Laboratory. Drilling tests were run to simulate deep drilling by using high bore pressures and high confining and overburden stresses. The purpose of this testing was to gain insight into practices that would improve rates of penetration and mechanical specific energy while drilling under high pressure conditions. Thirty-seven test series were run utilizing a variety of drilling parameters which allowed analysis of the performance ofmore » drill bits and drilling fluids. Five different drill bit types or styles were tested: four-bladed polycrystalline diamond compact (PDC), 7-bladed PDC in regular and long profile, roller-cone, and impregnated. There were three different rock types used to simulate deep formations: Mancos shale, Carthage marble, and Crab Orchard sandstone. The testing also analyzed various drilling fluids and the extent to which they improved drilling. The PDC drill bits provided the best performance overall. The impregnated and tungsten carbide insert roller-cone drill bits performed poorly under the conditions chosen. The cesium formate drilling fluid outperformed all other drilling muds when drilling in the Carthage marble and Mancos shale with PDC drill bits. The oil base drilling fluid with manganese tetroxide weighting material provided the best performance when drilling the Crab Orchard sandstone.« less

Flexible Peripheral Component Interconnect Input/Output Card

NASA Technical Reports Server (NTRS)

Bigelow, Kirk K.; Jerry, Albert L.; Baricio, Alisha G.; Cummings, Jon K.

2010-01-01

The Flexible Peripheral Component Interconnect (PCI) Input/Output (I/O) Card is an innovative circuit board that provides functionality to interface between a variety of devices. It supports user-defined interrupts for interface synchronization, tracks system faults and failures, and includes checksum and parity evaluation of interface data. The card supports up to 16 channels of high-speed, half-duplex, low-voltage digital signaling (LVDS) serial data, and can interface combinations of serial and parallel devices. Placement of a processor within the field programmable gate array (FPGA) controls an embedded application with links to host memory over its PCI bus. The FPGA also provides protocol stacking and quick digital signal processor (DSP) functions to improve host performance. Hardware timers, counters, state machines, and other glue logic support interface communications. The Flexible PCI I/O Card provides an interface for a variety of dissimilar computer systems, featuring direct memory access functionality. The card has the following attributes: 8/16/32-bit, 33-MHz PCI r2.2 compliance, Configurable for universal 3.3V/5V interface slots, PCI interface based on PLX Technology's PCI9056 ASIC, General-use 512K 16 SDRAM memory, General-use 1M 16 Flash memory, FPGA with 3K to 56K logical cells with embedded 27K to 198K bits RAM, I/O interface: 32-channel LVDS differential transceivers configured in eight, 4-bit banks; signaling rates to 200 MHz per channel, Common SCSI-3, 68-pin interface connector.

Teaching the Educable Mentally Retarded.

ERIC Educational Resources Information Center

Love, Harold D.

The text discusses the behavior, evaluation, and education of mentally retarded children. Harold D. Love presents an overview of the retarded, a description of intelligence and personality tests, and a historical survey of retardation; Virginia Cantrell reviews the educational philosophies and methods of Itard, Seguin, and Montessori. Shirley K.…

Guidelines for Design and Test of a Built-In Self Test (BIST) Circuit For Space Radiation Studies of High-Speed IC Technologies

NASA Technical Reports Server (NTRS)

Carts, M. A.; Marshall, P. W.; Reed, R.; Curie, S.; Randall, B.; LaBel, K.; Gilbert, B.; Daniel, E.

2006-01-01

Serial Bit Error Rate Testing under radiation to characterize single particle induced errors in high-speed IC technologies generally involves specialized test equipment common to the telecommunications industry. As bit rates increase, testing is complicated by the rapidly increasing cost of equipment able to test at-speed. Furthermore as rates extend into the tens of billions of bits per second test equipment ceases to be broadband, a distinct disadvantage for exploring SEE mechanisms in the target technologies. In this presentation the authors detail the testing accomplished in the CREST project and apply the knowledge gained to establish a set of guidelines suitable for designing arbitrarily high speed radiation effects tests.

PDC Bit Testing at Sandia Reveals Influence of Chatter in Hard-Rock Drilling

DOE Office of Scientific and Technical Information (OSTI.GOV)

RAYMOND,DAVID W.

1999-10-14

Polycrystalline diamond compact (PDC) bits have yet to be routinely applied to drilling the hard-rock formations characteristic of geothermal reservoirs. Most geothermal production wells are currently drilled with tungsten-carbide-insert roller-cone bits. PDC bits have significantly improved penetration rates and bit life beyond roller-cone bits in the oil and gas industry where soft to medium-hard rock types are encountered. If PDC bits could be used to double current penetration rates in hard rock geothermal well-drilling costs could be reduced by 15 percent or more. PDC bits exhibit reasonable life in hard-rock wear testing using the relatively rigid setups typical of laboratorymore » testing. Unfortunately, field experience indicates otherwise. The prevailing mode of failure encountered by PDC bits returning from hard-rock formations in the field is catastrophic, presumably due to impact loading. These failures usually occur in advance of any appreciable wear that might dictate cutter replacement. Self-induced bit vibration, or ''chatter'', is one of the mechanisms that may be responsible for impact damage to PDC cutters in hard-rock drilling. Chatter is more severe in hard-rock formations since they induce significant dynamic loading on the cutter elements. Chatter is a phenomenon whereby the drillstring becomes dynamically unstable and excessive sustained vibrations occur. Unlike forced vibration, the force (i.e., weight on bit) that drives self-induced vibration is coupled with the response it produces. Many of the chatter principles derived in the machine tool industry are applicable to drilling. It is a simple matter to make changes to a machine tool to study the chatter phenomenon. This is not the case with drilling. Chatter occurs in field drilling due to the flexibility of the drillstring. Hence, laboratory setups must be made compliant to observe chatter.« less

Mars Rover Step Toward Possible Resumption of Drilling

NASA Image and Video Library

2017-10-23

NASA's Curiosity Mars rover conducted a test on Oct. 17, 2017, as part of the rover team's development of a new way to use the rover's drill. This image from Curiosity's front Hazard Avoidance Camera (Hazcam) shows the drill's bit touching the ground during an assessment of measurements by a sensor on the rover's robotic arm. Curiosity used its drill to acquire sample material from Martian rocks 15 times from 2013 to 2016. In December 2016, the drill's feed mechanism stopped working reliably. During the test shown in this image, the rover touched the drill bit to the ground for the first time in 10 months. The image has been adjusted to brighten shaded areas so that the bit is more evident. The date was the 1,848th Martian day, or sol, of Curiosity's work on Mars In drill use prior to December 2016, two contact posts -- the stabilizers on either side of the bit -- were placed on the target rock while the bit was in a withdrawn position. Then the motorized feed mechanism within the drill extended the bit forward, and the bit's rotation and percussion actions penetrated the rock. A promising alternative now under development and testing -- called feed-extended drilling -- uses motion of the robotic arm to directly advance the extended bit into a rock. In this image, the bit is touching the ground but the stabilizers are not. In the Sol 1848 activity, Curiosity pressed the drill bit downward, and then applied smaller sideways forces while taking measurements with a force/torque sensor on the arm. The objective was to gain understanding about how readings from the sensor can be used during drilling to adjust for any sideways pressure that might risk the bit becoming stuck in a rock. While rover-team engineers are working on an alternative drilling method, the mission continues to examine sites on Mount Sharp, Mars, with other tools. https://photojournal.jpl.nasa.gov/catalog/PIA22063

Testing New Techniques for Mars Rover Rock-Drilling

NASA Image and Video Library

2017-10-23

In the summer and fall of 2017, the team operating NASA's Curiosity Mars rover conducted tests in the "Mars Yard" at NASA's Jet Propulsion Laboratory, Pasadena, California, to develop techniques that Curiosity might be able to use to resume drilling into rocks on Mars. JPL robotics engineer Vladimir Arutyunov, in this June 29, 2017, photo, checks the test rover's drill bit at its contact point with a rock. Note that the stabilizer post visible to the right of the bit is not in contact with the rock, unlike the positioning used and photographed by Curiosity when drilling into rocks on Mars in 2013 to 2016. In late 2016, after Curiosity's drill had collected sample material from 15 Martian rocks, the drill's feed mechanism ceased working reliably. That motorized mechanism moved the bit forward or back with relation to the stabilizer posts on either side of the bit. In normal drilling by Curiosity, the stabilizers were positioned on the target rock first, and then the feed mechanism extended the rotation-percussion bit into the rock. In the alternative technique seen here, called "feed-extended drilling," the test rover's stabilizers are not used to touch the rock. The bit is advanced into the rock by motion of the robotic arm rather than the drill's feed mechanism. https://photojournal.jpl.nasa.gov/catalog/PIA22061

An Intelligent Approach to Strengthening of the Rural Electrical Power Supply Using Renewable Energy Resources

NASA Astrophysics Data System (ADS)

Robert, F. C.; Sisodia, G. S.; Gopalan, S.

2017-08-01

The healthy growth of economy lies in the balance between rural and urban development. Several developing countries have achieved a successful growth of urban areas, yet rural infrastructure has been neglected until recently. The rural electrical grids are weak with heavy losses and low capacity. Renewable energy represents an efficient way to generate electricity locally. However, the renewable energy generation may be limited by the low grid capacity. The current solutions focus on grid reinforcement only. This article presents a model for improving renewable energy integration in rural grids with the intelligent combination of three strategies: 1) grid reinforcement, 2) use of storage and 3) renewable energy curtailments. Such approach provides a solution to integrate a maximum of renewable energy generation on low capacity grids while minimising project cost and increasing the percentage of utilisation of assets. The test cases show that a grid connection agreement and a main inverter sized at 60 kW (resp. 80 kW) can accommodate a 100 kWp solar park (resp. 100 kW wind turbine) with minimal storage.

A Very Efficient Transfer Function Bounding Technique on Bit Error Rate for Viterbi Decoded, Rate 1/N Convolutional Codes

NASA Technical Reports Server (NTRS)

Lee, P. J.

1984-01-01

For rate 1/N convolutional codes, a recursive algorithm for finding the transfer function bound on bit error rate (BER) at the output of a Viterbi decoder is described. This technique is very fast and requires very little storage since all the unnecessary operations are eliminated. Using this technique, we find and plot bounds on the BER performance of known codes of rate 1/2 with K 18, rate 1/3 with K 14. When more than one reported code with the same parameter is known, we select the code that minimizes the required signal to noise ratio for a desired bit error rate of 0.000001. This criterion of determining goodness of a code had previously been found to be more useful than the maximum free distance criterion and was used in the code search procedures of very short constraint length codes. This very efficient technique can also be used for searches of longer constraint length codes.

Brownian motion properties of optoelectronic random bit generators based on laser chaos.

PubMed

Li, Pu; Yi, Xiaogang; Liu, Xianglian; Wang, Yuncai; Wang, Yongge

2016-07-11

The nondeterministic property of the optoelectronic random bit generator (RBG) based on laser chaos are experimentally analyzed from two aspects of the central limit theorem and law of iterated logarithm. The random bits are extracted from an optical feedback chaotic laser diode using a multi-bit extraction technique in the electrical domain. Our experimental results demonstrate that the generated random bits have no statistical distance from the Brownian motion, besides that they can pass the state-of-the-art industry-benchmark statistical test suite (NIST SP800-22). All of them give a mathematically provable evidence that the ultrafast random bit generator based on laser chaos can be used as a nondeterministic random bit source.

Origami mechanologic.

PubMed

Treml, Benjamin; Gillman, Andrew; Buskohl, Philip; Vaia, Richard

2018-06-18

Robots autonomously interact with their environment through a continual sense-decide-respond control loop. Most commonly, the decide step occurs in a central processing unit; however, the stiffness mismatch between rigid electronics and the compliant bodies of soft robots can impede integration of these systems. We develop a framework for programmable mechanical computation embedded into the structure of soft robots that can augment conventional digital electronic control schemes. Using an origami waterbomb as an experimental platform, we demonstrate a 1-bit mechanical storage device that writes, erases, and rewrites itself in response to a time-varying environmental signal. Further, we show that mechanical coupling between connected origami units can be used to program the behavior of a mechanical bit, produce logic gates such as AND, OR, and three input majority gates, and transmit signals between mechanologic gates. Embedded mechanologic provides a route to add autonomy and intelligence in soft robots and machines. Copyright © 2018 the Author(s). Published by PNAS.

Design of replica bit line control circuit to optimize power for SRAM

NASA Astrophysics Data System (ADS)

Pengjun, Wang; Keji, Zhou; Huihong, Zhang; Daohui, Gong

2016-12-01

A design of a replica bit line control circuit to optimize power for SRAM is proposed. The proposed design overcomes the limitations of the traditional replica bit line control circuit, which cannot shut off the word line in time. In the novel design, the delay of word line enable and disable paths are balanced. Thus, the word line can be opened and shut off in time. Moreover, the chip select signal is decomposed, which prevents feedback oscillations caused by the replica bit line and the replica word line. As a result, the switch power caused by unnecessary discharging of the bit line is reduced. A 2-kb SRAM is fully custom designed in an SMIC 65-nm CMOS process. The traditional replica bit line control circuit and the new replica bit line control circuit are used in the designed SRAM, and their performances are compared with each other. The experimental results show that at a supply voltage of 1.2 V, the switch power consumption of the memory array can be reduced by 53.7%. Project supported by the Zhejiang Provincial Natural Science Foundation of China (No. LQ14F040001), the National Natural Science Foundation of China (Nos. 61274132, 61234002, 61474068), and the K. C. Wong Magna Fund in Ningbo University.

Measurement and analysis of chatter in a compliant model of a drillstring equipped with a PDC bit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elsayed, M.A.; Raymond, D.W.

1999-11-09

Typical laboratory testing of Polycrystalline Diamond Compact (PDC) bits is performed on relatively rigid setups. Even in hard rock, PDC bits exhibit reasonable life using such testing schemes. Unfortunately, field experience indicates otherwise. In this paper, the authors show that introducing compliance in testing setups provides better simulation of actual field conditions. Using such a scheme, they show that chatter can be severe even in softer rock, such as sandstone, and very destructive to the cutters in hard rock, such as sierra white granite.

A Tool Chain for the V and V of NASA Cryogenic Fuel Loading Health Management

DTIC Science & Technology

2014-10-02

Here, K. (2011). Formal testing for separation assurance. Ann. Math. Artif . Intell., 63(1), 5–30. Goodrich, C., Narasimhan, S., Daigle, M...Probabilistic Reasoning in Intelligent Sys- tems: Networks of plausible inference Morgan Kauf- mann: . Reed, E., Schumann, J., & Mengshoel, O. (2011

Application program of CRUST-1 10km continental scientific drilling rig in SK-2 scientific drilling well

NASA Astrophysics Data System (ADS)

Sun, Youhong; Gao, Ke; Yu, Ping; Liu, Baochang; Guo, Wei; Ma, Yinlong; Yang, Yang

2014-05-01

SK-2 Well is located in DaQing city,where is site of the largest oil field in China,Heilongjiang province, north-east of China.The objective of SK-2 well is to obtain full cores of cretaceous formation in Song Liao basin,and to build the time tunnel of Cretaceous greenhouse climate change,and to clarify the causes,processes and results of the formations of DaQing oil field. This will ensure to achieve our ultimate goals,to test the CRUST-1 drilling rig and improve China's deep scientific drilling technology,to form the scientific drilling technology,method and system with independent intellectual property rights,and to provide technical knowledge and information for China's ten kilometers super-deep scientific drilling technical resources.SK-2 Well is at 6400 meter depth, where the drilling inclination is 90 degree and the continuous coring length is 3535 meter that from 2865 to 6400 meter,the recovery rate of the core is greater or equal to 95 percent with 100 millimeters core diameter and 3.9 degree per 100 meter geothermal gradient.The CRUST-1 rig is designated with special drilling equipment for continental scientific drilling combined to the oil drilling equipment ability with advanced geological drilling technology which is highly automatic and intelligent. CRUST-1 drilling ability is 10000 meter with the maximum hook load 700 tons, the total power is 4610 Kilowatt.CRUST-1 will be integrated with a complete set of automation equipment,including big torque hydraulic top drive,high accuracy automatic drilling rod feeding system, suspended automatic drill string discharge device,hydraulic intelligent iron roughneck,and hydraulic automatic catwalk to fully meet the drilling process requirements of SK-2.Designed with advanced drilling technique for 260 degree in the bottom of SK-2 well and hard rock,including the drilling tools of high temperature hydraulic hammer,high temperature resistance and high strength aluminum drill pipe,high temperature preparation of mud treatment and high temperature resistant cementing materials, and bionic bits,that is coupling bionic PDC tooth bit and diamond-impregnated bit for hard rock.All parts of CRUST-1 were successfully assembled along with the derrick and base lift and transported about 3456 kilometers from manufacture,GuangHan city in southwest China's Sichuan province,to the well site of SK-2 in end of 2013.SK-2 will be finished during next 4 years.

Bit error rate tester using fast parallel generation of linear recurring sequences

DOEpatents

Pierson, Lyndon G.; Witzke, Edward L.; Maestas, Joseph H.

2003-05-06

A fast method for generating linear recurring sequences by parallel linear recurring sequence generators (LRSGs) with a feedback circuit optimized to balance minimum propagation delay against maximal sequence period. Parallel generation of linear recurring sequences requires decimating the sequence (creating small contiguous sections of the sequence in each LRSG). A companion matrix form is selected depending on whether the LFSR is right-shifting or left-shifting. The companion matrix is completed by selecting a primitive irreducible polynomial with 1's most closely grouped in a corner of the companion matrix. A decimation matrix is created by raising the companion matrix to the (n*k).sup.th power, where k is the number of parallel LRSGs and n is the number of bits to be generated at a time by each LRSG. Companion matrices with 1's closely grouped in a corner will yield sparse decimation matrices. A feedback circuit comprised of XOR logic gates implements the decimation matrix in hardware. Sparse decimation matrices can be implemented with minimum number of XOR gates, and therefore a minimum propagation delay through the feedback circuit. The LRSG of the invention is particularly well suited to use as a bit error rate tester on high speed communication lines because it permits the receiver to synchronize to the transmitted pattern within 2n bits.

Corrosion behaviour of friction-bit-joined and weld-bonded AA7075-T6/galvannealed DP980

DOE PAGES

Lim, Yong Chae; Squires, Lile; Pan, Tsung-Yu; ...

2016-12-22

Joining of aluminium alloys 7075-T6 and galvannealed dual phase 980 steel was achieved by friction bit joining (FBJ) and weld-bonding (FBJ + adhesive) processes. Accelerated laboratory-scale corrosion tests were performed on both FBJ only and weld-bonded specimens to study joint strength under a corrosive environment. Static lap shear tests showed that both FBJ only and weld-bonded cases generally retained more than 80% of the joint strength of non-corroded specimens at the end of corrosion testing. The presence of Zn/Fe coating on the steel substrate resulted in improved corrosion resistance for FBJ specimens, compared to joints produced with bare steel. Finally,more » an optical microscopy was used for cross-sectional analysis of corroded specimens. Some corrosion on the joining bit was observed near the bit head. However, the joining bit was still intact on the steel substrate, indicating that the primary bond was sound.« less

Corrosion behaviour of friction-bit-joined and weld-bonded AA7075-T6/galvannealed DP980

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lim, Yong Chae; Squires, Lile; Pan, Tsung-Yu

Joining of aluminium alloys 7075-T6 and galvannealed dual phase 980 steel was achieved by friction bit joining (FBJ) and weld-bonding (FBJ + adhesive) processes. Accelerated laboratory-scale corrosion tests were performed on both FBJ only and weld-bonded specimens to study joint strength under a corrosive environment. Static lap shear tests showed that both FBJ only and weld-bonded cases generally retained more than 80% of the joint strength of non-corroded specimens at the end of corrosion testing. The presence of Zn/Fe coating on the steel substrate resulted in improved corrosion resistance for FBJ specimens, compared to joints produced with bare steel. Finally,more » an optical microscopy was used for cross-sectional analysis of corroded specimens. Some corrosion on the joining bit was observed near the bit head. However, the joining bit was still intact on the steel substrate, indicating that the primary bond was sound.« less

OPTIMIZATION OF DEEP DRILLING PERFORMANCE--DEVELOPMENT AND BENCHMARK TESTING OF ADVANCED DIAMOND PRODUCT DRILL BITS & HP/HT FLUIDS TO SIGNIFICANTLY IMPROVE RATES OF PENETRATION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alan Black; Arnis Judzis

2004-10-01

The industry cost shared program aims to benchmark drilling rates of penetration in selected simulated deep formations and to significantly improve ROP through a team development of aggressive diamond product drill bit--fluid system technologies. Overall the objectives are as follows: Phase 1--Benchmark ''best in class'' diamond and other product drilling bits and fluids and develop concepts for a next level of deep drilling performance; Phase 2--Develop advanced smart bit-fluid prototypes and test at large scale; and Phase 3--Field trial smart bit-fluid concepts, modify as necessary and commercialize products. As of report date, TerraTek has concluded all major preparations for themore » high pressure drilling campaign. Baker Hughes encountered difficulties in providing additional pumping capacity before TerraTek's scheduled relocation to another facility, thus the program was delayed further to accommodate the full testing program.« less

Injecting Errors for Testing Built-In Test Software

NASA Technical Reports Server (NTRS)

Gender, Thomas K.; Chow, James

2010-01-01

Two algorithms have been conceived to enable automated, thorough testing of Built-in test (BIT) software. The first algorithm applies to BIT routines that define pass/fail criteria based on values of data read from such hardware devices as memories, input ports, or registers. This algorithm simulates effects of errors in a device under test by (1) intercepting data from the device and (2) performing AND operations between the data and the data mask specific to the device. This operation yields values not expected by the BIT routine. This algorithm entails very small, permanent instrumentation of the software under test (SUT) for performing the AND operations. The second algorithm applies to BIT programs that provide services to users application programs via commands or callable interfaces and requires a capability for test-driver software to read and write the memory used in execution of the SUT. This algorithm identifies all SUT code execution addresses where errors are to be injected, then temporarily replaces the code at those addresses with small test code sequences to inject latent severe errors, then determines whether, as desired, the SUT detects the errors and recovers

From Matter to Life

NASA Astrophysics Data System (ADS)

Imari Walker, Sara; Davies, Paul C. W.; Ellis, George F. R.

2017-02-01

1. Introduction Sara Imari Walker, Paul C. W. Davies and F. R. Ellis; Part I. Physics and Life: 2. The 'hard problem' of life Sara Imari Walker and Paul C. W. Davies; 3. Beyond initial conditions and laws of motion: constructor theory of information and life Chiara Marletto; Part II. Bio from Bit: 4. (How) did information emerge? Anne-Marie Grisogono; 5. On the emerging codes for chemical evolution Jillian E. Smith-Carpenter, Sha Li, Jay T. Goodwin, Anil K. Mehta and David G. Lynn; 6. Digital and analogue information in organisms Denis Noble; 7. From entropy to information: biased typewriters and the origin of life Christoph Adami and Thomas Labar; Part III. Life's Hidden Information: 8. Cryptographic nature David Krakauer; 9. Noise and function Steven Weinstein and Theodore Pavlic; 10. The many faces of state space compression David Wolpert, Eric Libby, Joshua Grochow and Simon DeDeo; 11. Causality, information and biological computation: an algorithmic software approach to life, disease and the immune system Hector Zenil, Angelika Schmidt and Jesper Tegnér; Part IV. Complexity and Causality: 12. Life's information hierarchy Jessica Flack; 13. Living through downward causation: from molecules to ecosystems Keith D. Farnsworth, George F. R. Ellis and Luc Jaeger; 14. Automata and animats: from dynamics to cause-effect structures Larissa Albantakis and Giulio Tononi; 15. Biological information, causality and specificity - an intimate relationship Karola Stotz and Paul Griffiths; Part V. From Matter to Mind: 16. Major transitions in political order Simon DeDeo; 17. Bits from biology for computational intelligence Michael Wibral, Joseph Lizier and Viola Priesemann; 18. Machine learning and the questions it raises G. Andrew D. Briggs and Dawid Potgieter.

Models of Mental Functioning

DTIC Science & Technology

1989-05-14

Mental Retardation. Detterman, D. K. (in press). Common challenges in understanding human and artificial intelligence. [Review of Creative Intelligences...Limited. Sternberg, R. J., & Detterman, D. K. (1988). Oue es la inteligencia ? Enfoque actual de su naturaleza y definicion. Translation of What is

Development and testing of a Mudjet-augmented PDC bit.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Black, Alan; Chahine, Georges; Raymond, David Wayne

2006-01-01

This report describes a project to develop technology to integrate passively pulsating, cavitating nozzles within Polycrystalline Diamond Compact (PDC) bits for use with conventional rig pressures to improve the rock-cutting process in geothermal formations. The hydraulic horsepower on a conventional drill rig is significantly greater than that delivered to the rock through bit rotation. This project seeks to leverage this hydraulic resource to extend PDC bits to geothermal drilling.

A Design Guide for Built-in-Test (BIT)

DTIC Science & Technology

1979-04-01

The following sections of the manual will provide in sequence: SECTION TOPIC A Discussion of the Various Types of BIT and Their Application - 4...adequate for some applications . Software BIT offers many advantages. Among these is the ability to make changes by reprogramming as the system is...particularly applicable to end-to-end testing. It can provide input stimuli to the system under tesi and can monitor the output. It can determine a GO/GO-NO

First results from the NEMO Test Site

NASA Astrophysics Data System (ADS)

Riccobene, Giorgio; NEMO Collaboration

2007-03-01

The NEMO (NEutrino Mediterranean Observatory) Collaboration is constructing, 25 km E from Catania (Sicily) at 2000 m depth, an underwater test site to perform long-term tests of prototypes and new technologies for an underwater high energy neutrino detector in the Mediterranean Sea. In this framework the collaboration deployed and operated an experimental apparatus for on-line monitoring of deep-sea noise. The station is equipped with 4 hydrophones operational in the range 30 Hz - 40 kHz. This interval of frequencies matches the range suitable for acoustic detection of high energy neutrino-induced showers in water. Hydrophone signals are digitized underwater at 96 kHz sampling frequency and 24 bits resolution. A custom software was developed to record data on high resolution 4-channels PCM .le. Data are used to model underwater acoustic noise as a function of frequency and time, a mandatory parametre for future acoustic neutrino detectors. Results indicate that the average noise in the site is compatible with noise produced in condition of sea surface agitation (sea state.)

Characterization, Optimization, and Test of the NPSAT1 MEMS 3-Axis Rate Sensor Suite for Use in Small Satellite Attitude Control

DTIC Science & Technology

2007-09-01

Power Control and Filter Boards (PCFB) are powered. The anticipated temperature range is based on a model, and like all models, it is subject to...voltage regulation, filtering , or averaging at room temperature , and with no rate applied. This data was taken at 1K samples/sec, and resulted in an...buffering or amplification should be done as near to the signal source as possible. The low pass filter was added to the rate, BIT, and temperature

Optical transmission modules for multi-channel superconducting quantum interference device readouts.

PubMed

Kim, Jin-Mok; Kwon, Hyukchan; Yu, Kwon-kyu; Lee, Yong-Ho; Kim, Kiwoong

2013-12-01

We developed an optical transmission module consisting of 16-channel analog-to-digital converter (ADC), digital-noise filter, and one-line serial transmitter, which transferred Superconducting Quantum Interference Device (SQUID) readout data to a computer by a single optical cable. A 16-channel ADC sent out SQUID readouts data with 32-bit serial data of 8-bit channel and 24-bit voltage data at a sample rate of 1.5 kSample/s. A digital-noise filter suppressed digital noises generated by digital clocks to obtain SQUID modulation as large as possible. One-line serial transmitter reformed 32-bit serial data to the modulated data that contained data and clock, and sent them through a single optical cable. When the optical transmission modules were applied to 152-channel SQUID magnetoencephalography system, this system maintained a field noise level of 3 fT/√Hz @ 100 Hz.

Design and testing of coring bits on drilling lunar rock simulant

NASA Astrophysics Data System (ADS)

Li, Peng; Jiang, Shengyuan; Tang, Dewei; Xu, Bo; Ma, Chao; Zhang, Hui; Qin, Hongwei; Deng, Zongquan

2017-02-01

Coring bits are widely utilized in the sampling of celestial bodies, and their drilling behaviors directly affect the sampling results and drilling security. This paper introduces a lunar regolith coring bit (LRCB), which is a key component of sampling tools for lunar rock breaking during the lunar soil sampling process. We establish the interaction model between the drill bit and rock at a small cutting depth, and the two main influential parameters (forward and outward rake angles) of LRCB on drilling loads are determined. We perform the parameter screening task of LRCB with the aim to minimize the weight on bit (WOB). We verify the drilling load performances of LRCB after optimization, and the higher penetrations per revolution (PPR) are, the larger drilling loads we gained. Besides, we perform lunar soil drilling simulations to estimate the efficiency on chip conveying and sample coring of LRCB. The results of the simulation and test are basically consistent on coring efficiency, and the chip removal efficiency of LRCB is slightly lower than HIT-H bit from simulation. This work proposes a method for the design of coring bits in subsequent extraterrestrial explorations.

Error detection and correction unit with built-in self-test capability for spacecraft applications

NASA Technical Reports Server (NTRS)

Timoc, Constantin

1990-01-01

The objective of this project was to research and develop a 32-bit single chip Error Detection and Correction unit capable of correcting all single bit errors and detecting all double bit errors in the memory systems of a spacecraft. We designed the 32-bit EDAC (Error Detection and Correction unit) based on a modified Hamming code and according to the design specifications and performance requirements. We constructed a laboratory prototype (breadboard) which was converted into a fault simulator. The correctness of the design was verified on the breadboard using an exhaustive set of test cases. A logic diagram of the EDAC was delivered to JPL Section 514 on 4 Oct. 1988.

AM06: the Associative Memory chip for the Fast TracKer in the upgraded ATLAS detector

NASA Astrophysics Data System (ADS)

Annovi, A.; Beretta, M. M.; Calderini, G.; Crescioli, F.; Frontini, L.; Liberali, V.; Shojaii, S. R.; Stabile, A.

2017-04-01

This paper describes the AM06 chip, which is a highly parallel processor for pattern recognition in the ATLAS high energy physics experiment. The AM06 contains memory banks that store data organized in 18 bit words; a group of 8 words is called "pattern". Each AM06 chip can store up to 131 072 patterns. The AM06 is a large chip, designed in 65 nm CMOS, and it combines full-custom memory arrays, standard logic cells and serializer/deserializer IP blocks at 2 Gbit/s for input/output communication. The overall silicon area is 168 mm2 and the chip contains about 421 million transistors. The AM06 receives the detector data for each event accepted by Level-1 trigger, up to 100 kHz, and it performs a track reconstruction based on hit information from channels of the ATLAS silicon detectors. Thanks to the design of a new associative memory cell and to the layout optimization, the AM06 consumption is only about 1 fJ/bit per comparison. The AM06 has been fabricated and successfully tested with a dedicated test system.

Shuttle bit rate synchronizer. [signal to noise ratios and error analysis

NASA Technical Reports Server (NTRS)

Huey, D. C.; Fultz, G. L.

1974-01-01

A shuttle bit rate synchronizer brassboard unit was designed, fabricated, and tested, which meets or exceeds the contractual specifications. The bit rate synchronizer operates at signal-to-noise ratios (in a bit rate bandwidth) down to -5 dB while exhibiting less than 0.6 dB bit error rate degradation. The mean acquisition time was measured to be less than 2 seconds. The synchronizer is designed around a digital data transition tracking loop whose phase and data detectors are integrate-and-dump filters matched to the Manchester encoded bits specified. It meets the reliability (no adjustments or tweaking) and versatility (multiple bit rates) of the shuttle S-band communication system through an implementation which is all digital after the initial stage of analog AGC and A/D conversion.

Methodology Investigation of AI(Artificial Intelligence) Test Officer Support Tool. Volume 2

DTIC Science & Technology

1989-03-01

a mathematical representation of a PE and its connections. This representation describes the " neurodynamics " of a PE. A sigmoid transfer function is...Element(i) Neurodynamics : Summation Function: Wo*XO + W,*X + W*X "X 0 0 1 1 2 W~fn Transfer Function: F(k) = (1 + e k) Output: x. - F(I) Figure 2-4...simplifies the description of the network operations. Thus, one or more PEs grouped together, with the same neurodynamics , is a layer [reference 5]. A

LOOP- SIMULATION OF THE AUTOMATIC FREQUENCY CONTROL SUBSYSTEM OF A DIFFERENTIAL MINIMUM SHIFT KEYING RECEIVER

NASA Technical Reports Server (NTRS)

Davarian, F.

1994-01-01

The LOOP computer program was written to simulate the Automatic Frequency Control (AFC) subsystem of a Differential Minimum Shift Keying (DMSK) receiver with a bit rate of 2400 baud. The AFC simulated by LOOP is a first order loop configuration with a first order R-C filter. NASA has been investigating the concept of mobile communications based on low-cost, low-power terminals linked via geostationary satellites. Studies have indicated that low bit rate transmission is suitable for this application, particularly from the frequency and power conservation point of view. A bit rate of 2400 BPS is attractive due to its applicability to the linear predictive coding of speech. Input to LOOP includes the following: 1) the initial frequency error; 2) the double-sided loop noise bandwidth; 3) the filter time constants; 4) the amount of intersymbol interference; and 5) the bit energy to noise spectral density. LOOP output includes: 1) the bit number and the frequency error of that bit; 2) the computed mean of the frequency error; and 3) the standard deviation of the frequency error. LOOP is written in MS SuperSoft FORTRAN 77 for interactive execution and has been implemented on an IBM PC operating under PC DOS with a memory requirement of approximately 40K of 8 bit bytes. This program was developed in 1986.

Acoustic/infrasonic rocket engine signatures

NASA Astrophysics Data System (ADS)

Tenney, Stephen M.; Noble, John M.; Whitaker, Rodney W.; ReVelle, Douglas O.

2003-09-01

Infrasonics offers the potential of long-range acoustic detection of explosions, missiles and even sounds created by manufacturing plants. The atmosphere attenuates acoustic energy above 20 Hz quite rapidly, but signals below 10 Hz can propagate to long ranges. Space shuttle launches have been detected infrasonically from over 1000 km away and the Concorde airliner from over 400 km. This technology is based on microphones designed to respond to frequencies from .1 to 300 Hz that can be operated outdoors for extended periods of time with out degrading their performance. The US Army Research Laboratory and Los Alamos National Laboratory have collected acoustic and infrasonic signatures of static engine testing of two missiles. Signatures were collected of a SCUD missile engine at Huntsville, AL and a Minuteman engine at Edwards AFB. The engines were fixed vertically in a test stand during the burn. We will show the typical time waveform signals of these static tests and spectrograms for each type. High resolution, 24-bit data were collected at 512 Hz and 16-bit acoustic data at 10 kHz. Edwards data were recorded at 250 Hz and 50 Hz using a Geotech Instruments 24 bit digitizer. Ranges from the test stand varied from 1 km to 5 km. Low level and upper level meteorological data was collected to provide full details of atmospheric propagation during the engine test. Infrasonic measurements were made with the Chaparral Physics Model 2 microphone with porous garden hose attached for wind noise suppression. A B&K microphone was used for high frequency acoustic measurements. Results show primarily a broadband signal with distinct initiation and completion points. There appear to be features present in the signals that would allow identification of missile type. At 5 km the acoustic/infrasonic signal was clearly present. Detection ranges for the types of missile signatures measured will be predicted based on atmospheric modeling. As part of an experiment conducted by ARL, sounding rocket launches have been detected from over 150 km. A variety of rockets launched from NASA"s Wallops Island facility were detected over a two year span. Arrays of microphones were able to create a line of bearing to the source of the launches that took place during different times of the year. This same experiment has been able to detect the space shuttle from over 1000 km on a regular basis. These two sources represent opposite ends of the target size, but they do demonstrate the potential for the detection and location of rocket launches.

Paternal age related schizophrenia (PARS): Latent subgroups detected by k-means clustering analysis.

PubMed

Lee, Hyejoo; Malaspina, Dolores; Ahn, Hongshik; Perrin, Mary; Opler, Mark G; Kleinhaus, Karine; Harlap, Susan; Goetz, Raymond; Antonius, Daniel

2011-05-01

Paternal age related schizophrenia (PARS) has been proposed as a subgroup of schizophrenia with distinct etiology, pathophysiology and symptoms. This study uses a k-means clustering analysis approach to generate hypotheses about differences between PARS and other cases of schizophrenia. We studied PARS (operationally defined as not having any family history of schizophrenia among first and second-degree relatives and fathers' age at birth ≥ 35 years) in a series of schizophrenia cases recruited from a research unit. Data were available on demographic variables, symptoms (Positive and Negative Syndrome Scale; PANSS), cognitive tests (Wechsler Adult Intelligence Scale-Revised; WAIS-R) and olfaction (University of Pennsylvania Smell Identification Test; UPSIT). We conducted a series of k-means clustering analyses to identify clusters of cases containing high concentrations of PARS. Two analyses generated clusters with high concentrations of PARS cases. The first analysis (N=136; PARS=34) revealed a cluster containing 83% PARS cases, in which the patients showed a significant discrepancy between verbal and performance intelligence. The mean paternal and maternal ages were 41 and 33, respectively. The second analysis (N=123; PARS=30) revealed a cluster containing 71% PARS cases, of which 93% were females; the mean age of onset of psychosis, at 17.2, was significantly early. These results strengthen the evidence that PARS cases differ from other patients with schizophrenia. Hypothesis-generating findings suggest that features of PARS may include a discrepancy between verbal and performance intelligence, and in females, an early age of onset. These findings provide a rationale for separating these phenotypes from others in future clinical, genetic and pathophysiologic studies of schizophrenia and in considering responses to treatment. Copyright © 2011 Elsevier B.V. All rights reserved.

Forecasting municipal solid waste generation using artificial intelligence modelling approaches.

PubMed

Abbasi, Maryam; El Hanandeh, Ali

2016-10-01

Municipal solid waste (MSW) management is a major concern to local governments to protect human health, the environment and to preserve natural resources. The design and operation of an effective MSW management system requires accurate estimation of future waste generation quantities. The main objective of this study was to develop a model for accurate forecasting of MSW generation that helps waste related organizations to better design and operate effective MSW management systems. Four intelligent system algorithms including support vector machine (SVM), adaptive neuro-fuzzy inference system (ANFIS), artificial neural network (ANN) and k-nearest neighbours (kNN) were tested for their ability to predict monthly waste generation in the Logan City Council region in Queensland, Australia. Results showed artificial intelligence models have good prediction performance and could be successfully applied to establish municipal solid waste forecasting models. Using machine learning algorithms can reliably predict monthly MSW generation by training with waste generation time series. In addition, results suggest that ANFIS system produced the most accurate forecasts of the peaks while kNN was successful in predicting the monthly averages of waste quantities. Based on the results, the total annual MSW generated in Logan City will reach 9.4×10(7)kg by 2020 while the peak monthly waste will reach 9.37×10(6)kg. Copyright © 2016 Elsevier Ltd. All rights reserved.

Relationships between the Kaufman Brief Intelligence Test and the Wechsler Adult Intelligence Scale-Third Edition.

PubMed

Walters, Steven O; Weaver, Kenneth A

2003-06-01

The Kaufman Brief Intelligence Test detects learning problems of young students and is a screen for whether a more comprehensive test of intelligence is needed. A study to assess whether this test was valid as an adult intelligence test was conducted with 20 undergraduate psychology majors. The correlations between the Kaufman Brief Intelligence Test's Composite, Vocabulary, and Matrices test scores and their corresponding Wechsler Adult Intelligence Scale-Third Edition test scores, the Full Scale (r=.88), Verbal (r=.77), and Performance scores (r=.87), indicated very strong relationships. In addition, no significant differences were obtained between the Composite, Vocabulary, and Matrices means of the Kaufman Brief Intelligence Test and the Full Scale, Verbal, and Performance means of the WAIS-III. The Kaufman Brief Intelligence Test appears to be a valid test of intelligence for adults.

Digital Image Display Control System, DIDCS. [for astronomical analysis

NASA Technical Reports Server (NTRS)

Fischel, D.; Klinglesmith, D. A., III

1979-01-01

DIDCS is an interactive image display and manipulation system that is used for a variety of astronomical image reduction and analysis operations. The hardware system consists of a PDP 11/40 main frame with 32K of 16-bit core memory; 96K of 16-bit MOS memory; two 9 track 800 BPI tape drives; eight 2.5 million byte RKO5 type disk packs, three user terminals, and a COMTAL 8000-S display system which has sufficient memory to store and display three 512 x 512 x 8 bit images along with an overlay plane and function table for each image, a pseudo color table and the capability for displaying true color. The software system is based around the language FORTH, which will permit an open ended dictionary of user level words for image analyses and display. A description of the hardware and software systems will be presented along with examples of the types of astronomical research that are being performed. Also a short discussion of the commonality and exchange of this type of image analysis system will be given.

Quantum communication for satellite-to-ground networks with partially entangled states

NASA Astrophysics Data System (ADS)

Chen, Na; Quan, Dong-Xiao; Pei, Chang-Xing; Yang-Hong

2015-02-01

To realize practical wide-area quantum communication, a satellite-to-ground network with partially entangled states is developed in this paper. For efficiency and security reasons, the existing method of quantum communication in distributed wireless quantum networks with partially entangled states cannot be applied directly to the proposed quantum network. Based on this point, an efficient and secure quantum communication scheme with partially entangled states is presented. In our scheme, the source node performs teleportation only after an end-to-end entangled state has been established by entanglement swapping with partially entangled states. Thus, the security of quantum communication is guaranteed. The destination node recovers the transmitted quantum bit with the help of an auxiliary quantum bit and specially defined unitary matrices. Detailed calculations and simulation analyses show that the probability of successfully transferring a quantum bit in the presented scheme is high. In addition, the auxiliary quantum bit provides a heralded mechanism for successful communication. Based on the critical components that are presented in this article an efficient, secure, and practical wide-area quantum communication can be achieved. Project supported by the National Natural Science Foundation of China (Grant Nos. 61072067 and 61372076), the 111 Project (Grant No. B08038), the Fund from the State Key Laboratory of Integrated Services Networks (Grant No. ISN 1001004), and the Fundamental Research Funds for the Central Universities (Grant Nos. K5051301059 and K5051201021).

Resonant Tunneling Analog-To-Digital Converter

NASA Technical Reports Server (NTRS)

Broekaert, T. P. E.; Seabaugh, A. C.; Hellums, J.; Taddiken, A.; Tang, H.; Teng, J.; vanderWagt, J. P. A.

1995-01-01

As sampling rates continue to increase, current analog-to-digital converter (ADC) device technologies will soon reach a practical resolution limit. This limit will most profoundly effect satellite and military systems used, for example, for electronic countermeasures, electronic and signal intelligence, and phased array radar. New device and circuit concepts will be essential for continued progress. We describe a novel, folded architecture ADC which could enable a technological discontinuity in ADC performance. The converter technology is based on the integration of multiple resonant tunneling diodes (RTD) and hetero-junction transistors on an indium phosphide substrate. The RTD consists of a layered semiconductor hetero-structure AlAs/InGaAs/AlAs(2/4/2 nm) clad on either side by heavily doped InGaAs contact layers. Compact quantizers based around the RTD offer a reduction in the number of components and a reduction in the input capacitance Because the component count and capacitance scale with the number of bits N, rather than by 2 (exp n) as in the flash ADC, speed can be significantly increased, A 4-bit 2-GSps quantizer circuit is under development to evaluate the performance potential. Circuit designs for ADC conversion with a resolution of 6-bits at 25GSps may be enabled by the resonant tunneling approach.

Autonomous power system brassboard

NASA Technical Reports Server (NTRS)

Merolla, Anthony

1992-01-01

The Autonomous Power System (APS) brassboard is a 20 kHz power distribution system which has been developed at NASA Lewis Research Center, Cleveland, Ohio. The brassboard exists to provide a realistic hardware platform capable of testing artificially intelligent (AI) software. The brassboard's power circuit topology is based upon a Power Distribution Control Unit (PDCU), which is a subset of an advanced development 20 kHz electrical power system (EPS) testbed, originally designed for Space Station Freedom (SSF). The APS program is designed to demonstrate the application of intelligent software as a fault detection, isolation, and recovery methodology for space power systems. This report discusses both the hardware and software elements used to construct the present configuration of the brassboard. The brassboard power components are described. These include the solid-state switches (herein referred to as switchgear), transformers, sources, and loads. Closely linked to this power portion of the brassboard is the first level of embedded control. Hardware used to implement this control and its associated software is discussed. An Ada software program, developed by Lewis Research Center's Space Station Freedom Directorate for their 20 kHz testbed, is used to control the brassboard's switchgear, as well as monitor key brassboard parameters through sensors located within these switches. The Ada code is downloaded from a PC/AT, and is resident within the 8086 microprocessor-based embedded controllers. The PC/AT is also used for smart terminal emulation, capable of controlling the switchgear as well as displaying data from them. Intelligent control is provided through use of a T1 Explorer and the Autonomous Power Expert (APEX) LISP software. Real-time load scheduling is implemented through use of a 'C' program-based scheduling engine. The methods of communication between these computers and the brassboard are explored. In order to evaluate the features of both the brassboard hardware and intelligent controlling software, fault circuits have been developed and integrated as part of the brassboard. A description of these fault circuits and their function is included. The brassboard has become an extremely useful test facility, promoting artificial intelligence (AI) applications for power distribution systems. However, there are elements of the brassboard which could be enhanced, thus improving system performance. Modifications and enhancements to improve the brassboard's operation are discussed.

Fast decoding techniques for extended single-and-double-error-correcting Reed Solomon codes

NASA Technical Reports Server (NTRS)

Costello, D. J., Jr.; Deng, H.; Lin, S.

1984-01-01

A problem in designing semiconductor memories is to provide some measure of error control without requiring excessive coding overhead or decoding time. For example, some 256K-bit dynamic random access memories are organized as 32K x 8 bit-bytes. Byte-oriented codes such as Reed Solomon (RS) codes provide efficient low overhead error control for such memories. However, the standard iterative algorithm for decoding RS codes is too slow for these applications. Some special high speed decoding techniques for extended single and double error correcting RS codes. These techniques are designed to find the error locations and the error values directly from the syndrome without having to form the error locator polynomial and solve for its roots.

Tribological tests of wear-resistant coatings used in the production of drill bits of horizontal and inclined drilling

NASA Astrophysics Data System (ADS)

Maslov, A. L.; Markova, I. Yu; Zakharova, E. S.; Polushin, N. I.; Laptev, A. I.

2017-05-01

It is known that modern drilling bit body undergoes significant abrasive wear in the contact area with the solid and the retracted cuttings. For protection of the body rationally use wear-resistant coating, which is welded directly to the body of bit. Before mass use of the developed coverings they need to be investigated by various methods that it was possible to characterize coatings and on the basis of the obtained data to perform optimization of both composition of coatings and technology. Such methods include microstructural studies tribological tests, crack resistance and others. This work is devoted to the tribological tests of imported brand of coatings WokaDur NiA and and domestic brand of coating HR-6750 (both brands manufactured by Ltd “Oerlikon Metco Rus”), used to protect the bit body from abrasive wear.

Real-time fast physical random number generator with a photonic integrated circuit.

PubMed

Ugajin, Kazusa; Terashima, Yuta; Iwakawa, Kento; Uchida, Atsushi; Harayama, Takahisa; Yoshimura, Kazuyuki; Inubushi, Masanobu

2017-03-20

Random number generators are essential for applications in information security and numerical simulations. Most optical-chaos-based random number generators produce random bit sequences by offline post-processing with large optical components. We demonstrate a real-time hardware implementation of a fast physical random number generator with a photonic integrated circuit and a field programmable gate array (FPGA) electronic board. We generate 1-Tbit random bit sequences and evaluate their statistical randomness using NIST Special Publication 800-22 and TestU01. All of the BigCrush tests in TestU01 are passed using 410-Gbit random bit sequences. A maximum real-time generation rate of 21.1 Gb/s is achieved for random bit sequences in binary format stored in a computer, which can be directly used for applications involving secret keys in cryptography and random seeds in large-scale numerical simulations.

Virtual Acoustic Displays for Teleconferencing: Intelligibility Advantage for "Telephone Grade" Audio

NASA Technical Reports Server (NTRS)

Begault, Durand R.; Null, Cynthia H. (Technical Monitor)

1994-01-01

Speech intelligibility was evaluated using a virtual acoustic ("3-D audio") display using the method specified by ANSI. Ten subjects were evaluated with stimuli either unfiltered or low-pass filtered at 4 kHz. Results show virtual acoustic techniques are advantageous for both full-bandwidth (44.1 kHz srate) and low (8 kHz srate) bandwidth "telephone-grade" teleconferencing systems.

Placing Intelligence into an Evolutionary Framework or How "g" Fits into the "r-K" Matrix of Life-History Traits Including Longevity

ERIC Educational Resources Information Center

Rushton, J. Philippe

2004-01-01

First, I describe why intelligence (Spearman's "g") can only be fully understood through "r-K" theory, which places it into an evolutionary framework along with brain size, longevity, maturation speed, and several other life-history traits. The "r-K" formulation explains why IQ predicts longevity and also why the gap in mortality rates between…

Structure and electrical properties of intergrowth bismuth layer-structured Bi4Ti3O12-CaBi4Ti4O15 ferroelectric ceramics

NASA Astrophysics Data System (ADS)

Choi, Gi Ppeum; Cho, Sam Yeon; Bu, Sang Don

2016-09-01

Pb-free ferroelectric Bi4Ti3O12-CaBi4Ti4O15 (BIT-CBT) ceramics were manufactured using a solid-state reaction method. Structural analysis by using X-ray diffraction confirmed the presence of a second phase of Bi2Ti2O7, and the surface depth X-ray diffraction analysis revealed that this phase existed only on the surface. This second phase appears to have been caused by the volatilization of Bi ions at high sintering temperatures. For resolution of the issue of volatilization of Bi ions and manufacture of BIT-CBT ceramics with a single phase, Bi2O3 powder was added to the BIT-CBT mixture, and a powder-bed method, in which pellets were covered with BIT-CBT powder, was used to manufacture the ceramic. The piezoelectric coefficient of the single-phase BIT-CBT ceramics was 12.4 pC/N while the residual polarization and the coercive electric field were 11.3 μC/cm2, and 125 kV/cm, respectively. The results suggest that single-phase BIT-CBT ceramics are suitable for the manufacture of elements incorporating these electrical characteristics.

75 FR 82372 - Application(s) for Duty-Free Entry of Scientific Instruments

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-30

..., Argonne LLC, 9700 South Cass Ave., Lemont, IL 60439. Instrument: Pilatus 100K Pixel Detector System... efficiency (no readout noise and direct detection scheme), high dynamic range (20-bits), and fast readout.... Instrument: Pilatus 300K Pixel Detector System. Manufacturer: Dectris Ltd., Switzerland. Intended Use: The...

Performance Bounds on Two Concatenated, Interleaved Codes

NASA Technical Reports Server (NTRS)

Moision, Bruce; Dolinar, Samuel

2010-01-01

A method has been developed of computing bounds on the performance of a code comprised of two linear binary codes generated by two encoders serially concatenated through an interleaver. Originally intended for use in evaluating the performances of some codes proposed for deep-space communication links, the method can also be used in evaluating the performances of short-block-length codes in other applications. The method applies, more specifically, to a communication system in which following processes take place: At the transmitter, the original binary information that one seeks to transmit is first processed by an encoder into an outer code (Co) characterized by, among other things, a pair of numbers (n,k), where n (n > k)is the total number of code bits associated with k information bits and n k bits are used for correcting or at least detecting errors. Next, the outer code is processed through either a block or a convolutional interleaver. In the block interleaver, the words of the outer code are processed in blocks of I words. In the convolutional interleaver, the interleaving operation is performed bit-wise in N rows with delays that are multiples of B bits. The output of the interleaver is processed through a second encoder to obtain an inner code (Ci) characterized by (ni,ki). The output of the inner code is transmitted over an additive-white-Gaussian- noise channel characterized by a symbol signal-to-noise ratio (SNR) Es/No and a bit SNR Eb/No. At the receiver, an inner decoder generates estimates of bits. Depending on whether a block or a convolutional interleaver is used at the transmitter, the sequence of estimated bits is processed through a block or a convolutional de-interleaver, respectively, to obtain estimates of code words. Then the estimates of the code words are processed through an outer decoder, which generates estimates of the original information along with flags indicating which estimates are presumed to be correct and which are found to be erroneous. From the perspective of the present method, the topic of major interest is the performance of the communication system as quantified in the word-error rate and the undetected-error rate as functions of the SNRs and the total latency of the interleaver and inner code. The method is embodied in equations that describe bounds on these functions. Throughout the derivation of the equations that embody the method, it is assumed that the decoder for the outer code corrects any error pattern of t or fewer errors, detects any error pattern of s or fewer errors, may detect some error patterns of more than s errors, and does not correct any patterns of more than t errors. Because a mathematically complete description of the equations that embody the method and of the derivation of the equations would greatly exceed the space available for this article, it must suffice to summarize by reporting that the derivation includes consideration of several complex issues, including relationships between latency and memory requirements for block and convolutional codes, burst error statistics, enumeration of error-event intersections, and effects of different interleaving depths. In a demonstration, the method was used to calculate bounds on the performances of several communication systems, each based on serial concatenation of a (63,56) expurgated Hamming code with a convolutional inner code through a convolutional interleaver. The bounds calculated by use of the method were compared with results of numerical simulations of performances of the systems to show the regions where the bounds are tight (see figure).

Computer-Aided Design for Built-In-Test (CADBIT) - BIT Library. Volume 2

DTIC Science & Technology

1989-10-01

TECHNIQUE: ON-BOARD RONI CATEGORY: LONG TUTORIA \\L PAG E 5 of 14I SUBCATEGORY: BIT TECHNIQUE ATTRIBUTES DATA TYPE: TEXT El LIST E] TABLE [ GRAPHIC E...SHIFT REGISTER (MISR) CATEGORY: LONG TUTORIA -L PAGE i Of 13 SUBCATEGORY: BIT TECH-{MQUE ATTRIBUTES DATA TYPE: TEXT LIST El TABLE GRAPHIC E EQUATIONS...ELEMENT DATA SHEET BIT TECHNIQUE: UTILIZING REDUNDANCY CATEGORY: LONG TUTORIA L PAGE 9 of 10 SUBCATEGORY: PARTS DATA TABLE DATA TYPE: TEXT F1 UST C3

Personal supercomputing by using transputer and Intel 80860 in plasma engineering

NASA Astrophysics Data System (ADS)

Ido, S.; Aoki, K.; Ishine, M.; Kubota, M.

1992-09-01

Transputer (T800) and 64-bit RISC Intel 80860 (i860) added on a personal computer can be used as an accelerator. When 32-bit T800s in a parallel system or 64-bit i860s are used, scientific calculations are carried out several ten times as fast as in the case of commonly used 32-bit personal computers or UNIX workstations. Benchmark tests and examples of physical simulations using T800s and i860 are reported.

Test plan for 32-bit microcomputers for the Water Resources Division; Chapter A, Test plan for acquisition of prototype 32-bit microcomputers

USGS Publications Warehouse

Hutchison, N.E.; Harbaugh, A.W.; Holloway, R.A.; Merk, C.F.

1987-01-01

The Water Resources Division (WRD) of the U.S. Geological Survey is evaluating 32-bit microcomputers to determine how they can complement, and perhaps later replace, the existing network of minicomputers. The WRD is also designing a National Water Information System (NWIS) that will combine and integrate the existing National Water Data Storage and Retrieval System (WATSTORE), National Water Data Exchange (NAWDEX), and components of several other existing systems. The procedures and testing done in a market evaluation of 32-bit microcomputers are documented. The results of the testing are documented in the NWIS Project Office. The market evaluation was done to identify commercially available hardware and software that could be used for implementing early NWIS prototypes to determine the applicability of 32-bit microcomputers for data base and general computing applications. Three microcomputers will be used for these prototype studies. The results of the prototype studies will be used to compile requirements for a Request for Procurement (RFP) for hardware and software to meet the WRD 's needs in the early 1990's. The identification of qualified vendors to provide the prototype hardware and software included reviewing industry literature, and making telephone calls and personal visits to prospective vendors. Those vendors that appeared to meet general requirements were required to run benchmark tests. (Author 's abstract)

Point Cloud Management Through the Realization of the Intelligent Cloud Viewer Software

NASA Astrophysics Data System (ADS)

Costantino, D.; Angelini, M. G.; Settembrini, F.

2017-05-01

The paper presents a software dedicated to the elaboration of point clouds, called Intelligent Cloud Viewer (ICV), made in-house by AESEI software (Spin-Off of Politecnico di Bari), allowing to view point cloud of several tens of millions of points, also on of "no" very high performance systems. The elaborations are carried out on the whole point cloud and managed by means of the display only part of it in order to speed up rendering. It is designed for 64-bit Windows and is fully written in C ++ and integrates different specialized modules for computer graphics (Open Inventor by SGI, Silicon Graphics Inc), maths (BLAS, EIGEN), computational geometry (CGAL, Computational Geometry Algorithms Library), registration and advanced algorithms for point clouds (PCL, Point Cloud Library), advanced data structures (BOOST, Basic Object Oriented Supporting Tools), etc. ICV incorporates a number of features such as, for example, cropping, transformation and georeferencing, matching, registration, decimation, sections, distances calculation between clouds, etc. It has been tested on photographic and TLS (Terrestrial Laser Scanner) data, obtaining satisfactory results. The potentialities of the software have been tested by carrying out the photogrammetric survey of the Castel del Monte which was already available in previous laser scanner survey made from the ground by the same authors. For the aerophotogrammetric survey has been adopted a flight height of approximately 1000ft AGL (Above Ground Level) and, overall, have been acquired over 800 photos in just over 15 minutes, with a covering not less than 80%, the planned speed of about 90 knots.

A comparative analysis of swarm intelligence techniques for feature selection in cancer classification.

PubMed

Gunavathi, Chellamuthu; Premalatha, Kandasamy

2014-01-01

Feature selection in cancer classification is a central area of research in the field of bioinformatics and used to select the informative genes from thousands of genes of the microarray. The genes are ranked based on T-statistics, signal-to-noise ratio (SNR), and F-test values. The swarm intelligence (SI) technique finds the informative genes from the top-m ranked genes. These selected genes are used for classification. In this paper the shuffled frog leaping with Lévy flight (SFLLF) is proposed for feature selection. In SFLLF, the Lévy flight is included to avoid premature convergence of shuffled frog leaping (SFL) algorithm. The SI techniques such as particle swarm optimization (PSO), cuckoo search (CS), SFL, and SFLLF are used for feature selection which identifies informative genes for classification. The k-nearest neighbour (k-NN) technique is used to classify the samples. The proposed work is applied on 10 different benchmark datasets and examined with SI techniques. The experimental results show that the results obtained from k-NN classifier through SFLLF feature selection method outperform PSO, CS, and SFL.

Bread: CDC 7600 program that processes Spent Fuel Test Climax data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hage, G.L.

BREAD will process a family of files copied from a data tape made by Hewlett-Packard equipment employed for data acquisition on the Spent Fuel Test-Climax at NTS. Tapes are delivered to Livermore approximately monthly. The process at this stage consists of four steps: read the binary files and convert from H-P 16-bit words to CDC 7600 60-bit words; check identification and data ranges; write the data in 6-bit ASCII (BCD) format, one data point per line; then sort the file by identifier and time.

b.i.t. Bremerhaven: Thin Clients entlasten Schulen

NASA Astrophysics Data System (ADS)

Das Schulamt Bremerhaven zentralisiert die Verwaltungs-IT und schafft dadurch Freiräume für pädagogische und organisatorische Herausforderungen. Pflege und Support der neuen Infrastruktur übernimmt der Dienstleister b.i.t. Bremerhaven, die Thin Clients kommen vom Bremer Hersteller IGEL Technology. Ganztagsschulen, das 12-jährige Abitur, PISA, der Wegfall der Orientierungsstufe - deutsche Schulen müssen derzeit zahlreiche organisatorische und pädagogische Herausforderungen bewältigen. Um die neuen Strukturen umsetzen zu können, werden zusätzliche Ressourcen benötigt. Das Schulamt Bremerhaven hat gemeinsam mit dem Dienstleister b.i.t. Bremerhaven (Betrieb für Informationstechnologie) eine intelligente Lösung gefunden, wie sich die benötigten finanziellen Freiräume schaffen lassen.

Design of a 0.13-μm CMOS cascade expandable ΣΔ modulator for multi-standard RF telecom systems

NASA Astrophysics Data System (ADS)

Morgado, Alonso; del Río, Rocío; de la Rosa, José M.

2007-05-01

This paper reports a 130-nm CMOS programmable cascade ΣΔ modulator for multi-standard wireless terminals, capable of operating on three standards: GSM, Bluetooth and UMTS. The modulator is reconfigured at both architecture- and circuit- level in order to adapt its performance to the different standards specifications with optimized power consumption. The design of the building blocks is based upon a top-down CAD methodology that combines simulation and statistical optimization at different levels of the system hierarchy. Transistor-level simulations show correct operation for all standards, featuring 13-bit, 11.3-bit and 9-bit effective resolution within 200-kHz, 1-MHz and 4-MHz bandwidth, respectively.

High-Altitude Aircraft-Based Electric-Field Measurements above Thunderstorms

NASA Technical Reports Server (NTRS)

Bateman, M. G.; Blakeslee, R. J.; Bailey, J. C.; Stewart, M. F.; Blair, A. K.

1999-01-01

We have developed a new set of eight electric field mills that were flown on a NASA ER-2 high-altitude aircraft. During the Third Convection And Moisture EXperiment (CAMEX- 3; Fall, 1998), measurements of electric field, storm dynamics, and ice microphysics were made over several hurricanes. Concurrently, the TExas-FLorida UNderflights (TEFLUN) program was being conducted to make the same measurements over Gulf Coast thunderstorms. Sample measurements will be shown. Our new mills have an internal 16-bit A/D, with a resolution of 0.25 V/m per bit at high gain, with a noise level less than the least significant bit. A second, lower gain channel gives us the ability to measure fields as high as 150 kV/m.

Advocating for the Visual Arts in the Era of No Child Left Behind

ERIC Educational Resources Information Center

Daniel, Christine

2010-01-01

Research has shown that a solid visual arts program provided to students throughout the K-12 years increases academic achievement, increases self-confidence and self-concept and provides opportunities for students to tap all their intelligences. However, recent budget cuts and the high stake testing on Mathematics and English Language arts at all…

High-speed high-accuracy three-dimensional shape measurement using digital binary defocusing method versus sinusoidal method

NASA Astrophysics Data System (ADS)

Hyun, Jae-Sang; Li, Beiwen; Zhang, Song

2017-07-01

This paper presents our research findings on high-speed high-accuracy three-dimensional shape measurement using digital light processing (DLP) technologies. In particular, we compare two different sinusoidal fringe generation techniques using the DLP projection devices: direct projection of computer-generated 8-bit sinusoidal patterns (a.k.a., the sinusoidal method), and the creation of sinusoidal patterns by defocusing binary patterns (a.k.a., the binary defocusing method). This paper mainly examines their performance on high-accuracy measurement applications under precisely controlled settings. Two different projection systems were tested in this study: a commercially available inexpensive projector and the DLP development kit. Experimental results demonstrated that the binary defocusing method always outperforms the sinusoidal method if a sufficient number of phase-shifted fringe patterns can be used.

High-speed 3D imaging using digital binary defocusing method vs sinusoidal method

NASA Astrophysics Data System (ADS)

Zhang, Song; Hyun, Jae-Sang; Li, Beiwen

2017-02-01

This paper presents our research findings on high-speed 3D imaging using digital light processing (DLP) technologies. In particular, we compare two different sinusoidal fringe generation techniques using the DLP projection devices: direct projection of 8-bit computer generated sinusoidal patterns (a.k.a, the sinusoidal method), and the creation of sinusoidal patterns by defocusing binary patterns (a.k.a., the binary defocusing method). This paper mainly examines their performance on high-accuracy measurement applications under precisely controlled settings. Two different projection systems were tested in this study: the commercially available inexpensive projector, and the DLP development kit. Experimental results demonstrated that the binary defocusing method always outperforms the sinusoidal method if a sufficient number of phase-shifted fringe patterns can be used.

CMOS array design automation techniques

NASA Technical Reports Server (NTRS)

Lombardi, T.; Feller, A.

1976-01-01

The design considerations and the circuit development for a 4096-bit CMOS SOS ROM chip, the ATL078 are described. Organization of the ATL078 is 512 words by 8 bits. The ROM was designed to be programmable either at the metal mask level or by a directed laser beam after processing. The development of a 4K CMOS SOS ROM fills a void left by available ROM chip types, and makes the design of a totally major high speed system more realizable.

Advanced Concepts for Avionics/Weapon System Design, Development and Integration: Conference Proceedings of the Avionics Panel Symposium (45th) Held at Ottawa, Canada on 18-22 April 1983.

DTIC Science & Technology

1983-10-01

BIT A,, M 115V ACBB N 270V DC RETURN p 115V ACCA R IW DC POWER S INTERLOCK RETURN T STRUCTURE GROUND U FIBER OPTICS BUS V ADDRESS BIT A,, w...Ontario Kl A 0K2 Canada FGAN- FFM , D-5307 Wachtberg-Werthhoven Germany Concordia University, 7141 Sherbrooke St. W. Montreal, QueH4BlRG Canada

Free-Electron Laser Driven by the NBS (National Bureau of Standards) CW Microtron

DTIC Science & Technology

1988-03-31

planned over several years. This will begin with the purchase of a 32-bit dual processor system for the yet to be constructed primary station wire scanner ...display subsystem. This 32-bit dual processor system will not only form the wire scanner display system, but has sufficient processing power to...7th hit. Coiif. on FELs, eds., E.T. Scharlemann and D. Prosnitz (North- Holland, Amsterdam, 1986) p. 278. 121 X.K Maruyania and S. Penner, C.M. Tang

Technology Development and Field Trials of EGS Drilling Systems at Chocolate Mountain

DOE Data Explorer

Steven Knudsen

2012-01-01

Polycrystalline diamond compact (PDC) bits are routinely used in the oil and gas industry for drilling medium to hard rock but have not been adopted for geothermal drilling, largely due to past reliability issues and higher purchase costs. The Sandia Geothermal Research Department has recently completed a field demonstration of the applicability of advanced synthetic diamond drill bits for production geothermal drilling. Two commercially-available PDC bits were tested in a geothermal drilling program in the Chocolate Mountains in Southern California. These bits drilled the granitic formations with significantly better Rate of Penetration (ROP) and bit life than the roller cone bit they are compared with. Drilling records and bit performance data along with associated drilling cost savings are presented herein. The drilling trials have demonstrated PDC bit drilling technology has matured for applicability and improvements to geothermal drilling. This will be especially beneficial for development of Enhanced Geothermal Systems whereby resources can be accessed anywhere within the continental US by drilling to deep, hot resources in hard, basement rock formations.

Integration of Interactive Interfaces with Intelligent Tutoring Systems: An Implementation

DTIC Science & Technology

1993-09-01

Intelligent Tutoring Systems: At the crossroad of artifcial intelligence and education. Ablex Publishing Corp., Norwood, NJ. 6. Goldstein, 1. L. (1986...AD-A273 869 IImhlllII Integration of Interactive Interfaces with Intelligent Thtoring Systems: An Implementation Vijay Vasandani and T. Govindaraj...NUMBERS Integration of Interactive Interfaces with Intelligent Tutoring Systems: An Implementation C: N00014-87-K-0482 .ALITHOR(S) PE: 0602233N Vijay

Four channel Laser Firing Unit using laser diodes

NASA Technical Reports Server (NTRS)

Rosner, David, Sr.; Spomer, Edwin, Sr.

1994-01-01

This paper describes the accomplishments and status of PS/EDD's (Pacific Scientific/Energy Dynamics Division) internal research and development effort to prototype and demonstrate a practical four channel laser firing unit (LFU) that uses laser diodes to initiate pyrotechnic events. The LFU individually initiates four ordnance devices using the energy from four diode lasers carried over the fiber optics. The LFU demonstrates end-to-end optical built in test (BIT) capabilities. Both Single Fiber Reflective BIT and Dual Fiber Reflective BIT approaches are discussed and reflection loss data is presented. This paper includes detailed discussions of the advantages and disadvantages of both BIT approaches, all-fire and no-fire levels, and BIT detection levels. The following topics are also addressed: electronic control and BIT circuits, fiber optic sizing and distribution, and an electromechanical shutter type safe/arm device. This paper shows the viability of laser diode initiation systems and single fiber BIT for typing military applications.

Evaluations of bit sleeve and twisted-body bit designs for controlling roof bolter dust

PubMed Central

Beck, T.W.

2015-01-01

Drilling into coal mine roof strata to install roof bolts has the potential to release substantial quantities of respirable dust. Due to the proximity of drill holes to the breathing zone of roof bolting personnel, dust escaping the holes and avoiding capture by the dust collection system pose a potential respiratory health risk. Controls are available to complement the typical dry vacuum collection system and minimize harmful exposures during the initial phase of drilling. This paper examines the use of a bit sleeve in combination with a dust-hog-type bit to improve dust extraction during the critical initial phase of drilling. A twisted-body drill bit is also evaluated to determine the quantity of dust liberated in comparison with the dust-hog-type bit. Based on the results of our laboratory tests, the bit sleeve may reduce dust emissions by one-half during the initial phase of drilling before the drill bit is fully enclosed by the drill hole. Because collaring is responsible for the largest dust liberations, overall dust emission can also be substantially reduced. The use of a twisted-body bit has minimal improvement on dust capture compared with the commonly used dust-hog-type bit. PMID:26257435

Fundamental physics issues of multilevel logic in developing a parallel processor.

NASA Astrophysics Data System (ADS)

Bandyopadhyay, Anirban; Miki, Kazushi

2007-06-01

In the last century, On and Off physical switches, were equated with two decisions 0 and 1 to express every information in terms of binary digits and physically realize it in terms of switches connected in a circuit. Apart from memory-density increase significantly, more possible choices in particular space enables pattern-logic a reality, and manipulation of pattern would allow controlling logic, generating a new kind of processor. Neumann's computer is based on sequential logic, processing bits one by one. But as pattern-logic is generated on a surface, viewing whole pattern at a time is a truly parallel processing. Following Neumann's and Shannons fundamental thermodynamical approaches we have built compatible model based on series of single molecule based multibit logic systems of 4-12 bits in an UHV-STM. On their monolayer multilevel communication and pattern formation is experimentally verified. Furthermore, the developed intelligent monolayer is trained by Artificial Neural Network. Therefore fundamental weak interactions for the building of truly parallel processor are explored here physically and theoretically.

Business intelligence from social media: a study from the VAST Box Office Challenge.

PubMed

Lu, Yafeng; Wang, Feng; Maciejewski, Ross

2014-01-01

With over 16 million tweets per hour, 600 new blog posts per minute, and 400 million active users on Facebook, businesses have begun searching for ways to turn real-time consumer-based posts into actionable intelligence. The goal is to extract information from this noisy, unstructured data and use it for trend analysis and prediction. Current practices support the idea that visual analytics (VA) can help enable the effective analysis of such data. However, empirical evidence demonstrating the effectiveness of a VA solution is still lacking. A proposed VA toolkit extracts data from Bitly and Twitter to predict movie revenue and ratings. Results from the 2013 VAST Box Office Challenge demonstrate the benefit of an interactive environment for predictive analysis, compared to a purely statistical modeling approach. The VA approach used by the toolkit is generalizable to other domains involving social media data, such as sales forecasting and advertisement analysis.

Effect of combined digital imaging parameters on endodontic file measurements.

PubMed

de Oliveira, Matheus Lima; Pinto, Geraldo Camilo de Souza; Ambrosano, Glaucia Maria Bovi; Tosoni, Guilherme Monteiro

2012-10-01

This study assessed the effect of the combination of a dedicated endodontic filter, spatial resolution, and contrast resolution on the determination of endodontic file lengths. Forty extracted single-rooted teeth were x-rayed with K-files (ISO size 10 and 15) in the root canals. Images were acquired using the VistaScan system (Dürr Dental, Beitigheim-Bissingen, Germany) under different combining parameters of spatial resolution (10 and 25 line pairs per millimeter [lp/mm]) and contrast resolution (8- and 16-bit depths). Subsequently, a dedicated endodontic filter was applied on the 16-bit images, creating 2 additional parameters. Six observers measured the length of the endodontic files in the root canals using the software that accompanies the system. The mean values of the actual file lengths and the measurements of the radiographic images were submitted to 1-way analysis of variance and the Tukey test at a level of significance of 5%. The intraobserver reproducibility was assessed by the intraclass correlation coefficient. All combined image parameters showed excellent intraobserver agreement with intraclass correlation coefficient means higher than 0.98. The imaging parameter of 25 lp/mm and 16 bit associated with the use of the endodontic filter did not differ significantly from the actual file lengths when both file sizes were analyzed together or separately (P > .05). When the size 15 file was evaluated separately, only 8-bit images differed significantly from the actual file lengths (P ≤ .05). The combination of an endodontic filter with high spatial resolution and high contrast resolution is recommended for the determination of file lengths when using storage phosphor plates. Copyright © 2012 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Smart BIT/TSMD Integration

DTIC Science & Technology

1991-12-01

user using the ’: knn ’ option in the do-scenario command line). An instance of the K-Nearest Neighbor object is first created and initialized before...Navigation Computer HF High Frequency ILS Instrument Landing System KNN K - Nearest Neighbor LRU Line Replaceable Unit MC Mission Computer MTCA...approaches have been investigated here, K-nearest Neighbors ( KNN ) and neural networks (NN). Both approaches require that previously classified examples of

Investigation of mode partition noise in Fabry-Perot laser diode

NASA Astrophysics Data System (ADS)

Guo, Qingyi; Deng, Lanxin; Mu, Jianwei; Li, Xun; Huang, Wei-Ping

2014-09-01

Passive optical network (PON) is considered as the most appealing access network architecture in terms of cost-effectiveness, bandwidth management flexibility, scalability and durability. And to further reduce the cost per subscriber, a Fabry-Perot (FP) laser diode is preferred as the transmitter at the optical network units (ONUs) because of its lower cost compared to distributed feedback (DFB) laser diode. However, the mode partition noise (MPN) associated with the multi-longitudinal-mode FP laser diode becomes the limiting factor in the network. This paper studies the MPN characteristics of the FP laser diode using the time-domain simulation of noise-driven multi-mode laser rate equation. The probability density functions are calculated for each longitudinal mode. The paper focuses on the investigation of the k-factor, which is a simple yet important measure of the noise power, but is usually taken as a fitted or assumed value in the penalty calculations. In this paper, the sources of the k-factor are studied with simulation, including the intrinsic source of the laser Langevin noise, and the extrinsic source of the bit pattern. The photon waveforms are shown under four simulation conditions for regular or random bit pattern, and with or without Langevin noise. The k-factors contributed by those sources are studied with a variety of bias current and modulation current. Simulation results are illustrated in figures, and show that the contribution of Langevin noise to the k-factor is larger than that of the random bit pattern, and is more dominant at lower bias current or higher modulation current.

Video framerate, resolution and grayscale tradeoffs for undersea telemanipulator

NASA Technical Reports Server (NTRS)

Ranadive, V.; Sheridan, T. B.

1981-01-01

The product of Frame Rate (F) in frames per second, Resolution (R) in total pixels and grayscale in bits (G) equals the transmission band rate in bits per second. Thus for a fixed channel capacity there are tradeoffs between F, R and G in the actual sampling of the picture for a particular manual control task in the present case remote undersea manipulation. A manipulator was used in the MASTER/SLAVE mode to study these tradeoffs. Images were systematically degraded from 28 frames per second, 128 x 128 pixels and 16 levels (4 bits) grayscale, with various FRG combinations constructed from a real-time digitized (charge-injection) video camera. It was found that frame rate, resolution and grayscale could be independently reduced without preventing the operator from accomplishing his/her task. Threshold points were found beyond which degradation would prevent any successful performance. A general conclusion is that a well trained operator can perform familiar remote manipulator tasks with a considerably degrade picture, down to 50 K bits/ sec.

Plasma Interactions with Spacecraft. Volume 1

DTIC Science & Technology

2011-04-15

64-bit MacOS X environments. N2kScriptRunner, a C++ code that runs a Nascap-2k script outside of the Java user interface, was created. Using...Default Script and Original INIVEL Velocity Initialization ..........................................................15 Figure 6. Potentials at 25 µs...Current (Right Scale) Using Default Script and Modified INIVEL Velocity Initialization ........................................................16

A Leadership Competency Model for U.S. Air Force Wing Chaplains

DTIC Science & Technology

2009-02-12

45th Annual Conference of the International Military Testing Association, 3-6 November 2003, Pensacola, FL, 721-33, http://www.interrnationalmta.org...2005). 19 31 David C. McClelland, “ Testing for Competence Rather than for ‘Intelligence,’” American Psychologist 28, no. 1 (1973): 1-14. 32 C.K...Ronald Ash, Mariana Batista, Linda Carr, Lorraine D. Eyde , Beryl Hesketh, Jerry Kehoe, Kenneth Pearlman, Erich Prien, and Juan I. Sanchez, “The Practice of

Assessing the efficiency of carbide drill bits and factors influencing their application to debris-rich subglacial ice

NASA Astrophysics Data System (ADS)

Yang, Cheng; Jiang, Jianliang; Cao, Pinlu; Wang, Jinsong; Fan, Xiaopeng; Shang, Yuequan; Talalay, Pavel

2017-09-01

When drilling into subglacial bedrock, drill operators commonly encounter basal ice containing high concentrations of rock debris and melt water. As such conditions can easily damage conventional ice drills, researchers have experimented with carbide, diamond, and polycrystalline diamond compact drill bits, with varying degrees of success. In this study, we analyzed the relationship between drilling speed and power consumption for a carbide drill bit penetrating debris-rich ice. We also assessed drill load, rotation speed, and various performance parameters for the cutting element, as well as the physical and mechanical properties of rock and ice, to construct mathematical models. We show that our modeled results are in close agreement with the experimental data, and that both penetration speed and power consumption are positively correlated with drill speed and load. When used in ice with 30% rock content, the maximum penetration speed of the carbide bit is 3.4 mm/s with a power consumption of ≤0.5 kW, making the bit suitable for use with existing electromechanical drills. Our study also provides a guide for further research into cutting heat and equipment design.

Heavy-Ion Testing of the Freescale Qorivva 32-bit Automotive-Grade MCU

NASA Technical Reports Server (NTRS)

Wilcox, Ted; Seidleck, Christina; Casey, Megan; LaBel, Ken

2016-01-01

We present single-event effects testing results from a commercially-available automotive microcontroller. We discuss the difficulties encountered testing with commercially-provided evaluation boards while attempting to classify the complex and varied failure modes of a modern 32-bit microcontroller. This work also describes some of the possible advantages to using off-the-shelf automotive-grade electronics for low-risk aerospace applications.

106-17 Telemetry Standards Chapter 7 Packet Telemetry Downlink

DTIC Science & Technology

2017-07-31

Acronyms IP Internet Protocol IPv4 Internet Protocol, Version 4 IPv6 Internet Protocol, Version 6 LLP low-latency PTDP MAC media access control...o 4’b0101: PT Internet Protocol (IP) Packet o 4’b0110: PT Chapter 24 TmNSMessage Packet o 4’b0111 – 4’b1111: Reserved • Fragment (bits 17 – 16...packet is defined as a free -running 12-bit counter. The PT test counter packet shall consist of one 12-bit word and shall be encoded as one 24-bit

Automatic Test, Configuration, and Repair of Cellular Arrays

DTIC Science & Technology

1975-06-01

one cell to loed any good cell that is not walled off by flawed cells. The loading Information which the computer sends to the array may select one...to loed that cell’s loader and function-specificatioi state bits. After the cell is loaded» it« loader state bits may specify which of the cell’s...Mechanism With Options FUNCTION-SPEC, STATE BITS D.OUT INO INI OUTO 0UT1 LOO LO PAGE 99 LOADER TIP BITS CHANGER ill LSTA S.U.IN S.R.IN

A comparative study of artificial intelligent-based maximum power point tracking for photovoltaic systems

NASA Astrophysics Data System (ADS)

Hussain Mutlag, Ammar; Mohamed, Azah; Shareef, Hussain

2016-03-01

Maximum power point tracking (MPPT) is normally required to improve the performance of photovoltaic (PV) systems. This paper presents artificial intelligent-based maximum power point tracking (AI-MPPT) by considering three artificial intelligent techniques, namely, artificial neural network (ANN), adaptive neuro fuzzy inference system with seven triangular fuzzy sets (7-tri), and adaptive neuro fuzzy inference system with seven gbell fuzzy sets. The AI-MPPT is designed for the 25 SolarTIFSTF-120P6 PV panels, with the capacity of 3 kW peak. A complete PV system is modelled using 300,000 data samples and simulated in the MATLAB/SIMULINK. The AI-MPPT has been tested under real environmental conditions for two days from 8 am to 18 pm. The results showed that the ANN based MPPT gives the most accurate performance and then followed by the 7-tri-based MPPT.

Anthropic selection and the habitability of planets orbiting M and K dwarfs

NASA Astrophysics Data System (ADS)

Waltham, Dave

2011-10-01

The Earth may have untypical characteristics which were necessary preconditions for the emergence of life and, ultimately, intelligent observers. This paper presents a rigorous procedure for quantifying such "anthropic selection" effects by comparing Earth's properties to those of exoplanets. The hypothesis that there is anthropic selection for stellar mass (i.e. planets orbiting stars with masses within a particular range are more favourable for the emergence of observers) is then tested. The results rule out the expected strong selection for low mass stars which would result, all else being equal, if the typical timescale for the emergence of intelligent observers is very long. This indicates that the habitable zone of small stars may be less hospitable for intelligent life than the habitable zone of solar-mass stars. Additional planetary properties can also be analyzed, using the approach introduced here, once relatively complete and unbiased statistics are made available by current and planned exoplanet characterization projects.

Characteristics of Single-Event Upsets in a Fabric Switch (ADS151)

NASA Technical Reports Server (NTRS)

Buchner, Stephen; Carts, Martin A.; McMorrow, Dale; Kim, Hak; Marshall, Paul W.; LaBel, Kenneth A.

2003-01-01

Abstract-Two types of single event effects - bit errors and single event functional interrupts - were observed during heavy-ion testing of the AD8151 crosspoint switch. Bit errors occurred in bursts with the average number of bits in a burst being dependent on both the ion LET and on the data rate. A pulsed laser was used to identify the locations on the chip where the bit errors and single event functional interrupts occurred. Bit errors originated in the switches, drivers, and output buffers. Single event functional interrupts occurred when the laser was focused on the second rank latch containing the data specifying the state of each switch in the 33x17 matrix.

Family centered brief intensive treatment: a pilot study of an outpatient treatment for acute suicidal ideation.

PubMed

Anastasia, Trena T; Humphries-Wadsworth, Terresa; Pepper, Carolyn M; Pearson, Timothy M

2015-02-01

Family Centered Brief Intensive Treatment (FC BIT), a hospital diversion treatment program for individuals with acute suicidal ideation, was developed to treat suicidal clients and their families. Individuals who met criteria for hospitalization were treated as outpatients using FC BIT (n = 19) or an intensive outpatient treatment without the family component (IOP; n = 24). Clients receiving FC BIT identified family members or supportive others to participate in therapy. FC BIT clients had significantly greater improvement at the end of treatment compared to IOP clients on measures of depression, hopelessness, and suicidality. Further research is needed to test the efficacy of FC BIT. © 2014 The American Association of Suicidology.

32 CFR 1901.02 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Defense Other Regulations Relating to National Defense CENTRAL INTELLIGENCE AGENCY PUBLIC RIGHTS UNDER THE... meanings indicated: (a) Agency or CIA means the United States Central Intelligence Agency acting through... individual that is maintained by the Central Intelligence Agency in a system of records; (k) Requester or...

32 CFR 1901.02 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Defense Other Regulations Relating to National Defense CENTRAL INTELLIGENCE AGENCY PUBLIC RIGHTS UNDER THE... meanings indicated: (a) Agency or CIA means the United States Central Intelligence Agency acting through... individual that is maintained by the Central Intelligence Agency in a system of records; (k) Requester or...

A sub-microwatt asynchronous level-crossing ADC for biomedical applications.

PubMed

Li, Yongjia; Zhao, Duan; Serdijn, Wouter A

2013-04-01

A continuous-time level-crossing analog-to-digital converter (LC-ADC) for biomedical applications is presented. When compared to uniform-sampling (US) ADCs LC-ADCs generate fewer samples for various sparse biomedical signals. Lower power consumption and reduced design complexity with respect to conventional LC-ADCs are achieved due to: 1) replacing the n-bit digital-to-analog converter (DAC) with a 1-bit DAC; 2) splitting the level-crossing detections; and 3) fixing the comparison window. Designed and implemented in 0.18 μm CMOS technology, the proposed ADC uses a chip area of 220 × 203 μm(2). Operating from a supply voltage of 0.8 V, the ADC consumes 313-582 nW from 5 Hz to 5 kHz and achieves an ENOB up to 7.9 bits.

High-Altitude Aircraft-Based Electric-Field Measurements Above Thunderstorms

NASA Technical Reports Server (NTRS)

Bateman, M. G.; Blakeslee, R. J.; Bailey, J. C.; Stewart, M. F.; Blair, A. K.

1999-01-01

We have developed a new set of eight electric field mills that were flown on a NASA ER-2 high-altitude aircraft. During the Third Convection And Moisture EXperiment (CAMEX-3; Fall, 1998), measurements of electric field, storm dynamics, and ice microphysics were made over several hurricanes. Concurrently, the TExas-FLorida UNderflights (TEFLUN) program was being conducted to make the same measurements over Gulf Coast thunderstorms. Sample measurements are shown: typical flight altitude is 20km. Our new mills have an internal 16-bit A/D, with a resolution of 0.25V/m per bit at high gain, with a noise level less than the least significant bit. A second, lower gain channel gives us the ability to measure fields as high as 150 kV/m.

Spectrally efficient digitized radio-over-fiber system with k-means clustering-based multidimensional quantization.

PubMed

Zhang, Lu; Pang, Xiaodan; Ozolins, Oskars; Udalcovs, Aleksejs; Popov, Sergei; Xiao, Shilin; Hu, Weisheng; Chen, Jiajia

2018-04-01

We propose a spectrally efficient digitized radio-over-fiber (D-RoF) system by grouping highly correlated neighboring samples of the analog signals into multidimensional vectors, where the k-means clustering algorithm is adopted for adaptive quantization. A 30  Gbit/s D-RoF system is experimentally demonstrated to validate the proposed scheme, reporting a carrier aggregation of up to 40 100 MHz orthogonal frequency division multiplexing (OFDM) channels with quadrate amplitude modulation (QAM) order of 4 and an aggregation of 10 100 MHz OFDM channels with a QAM order of 16384. The equivalent common public radio interface rates from 37 to 150  Gbit/s are supported. Besides, the error vector magnitude (EVM) of 8% is achieved with the number of quantization bits of 4, and the EVM can be further reduced to 1% by increasing the number of quantization bits to 7. Compared with conventional pulse coding modulation-based D-RoF systems, the proposed D-RoF system improves the signal-to-noise-ratio up to ∼9  dB and greatly reduces the EVM, given the same number of quantization bits.

Research of built-in self test technology on cable-free self-positioning seismograph

NASA Astrophysics Data System (ADS)

Huaizhu, Z.; Lin, J.; Chen, Z.; Zhang, L.; Yang, H.; Zheng, F.

2011-12-01

Cable-free self-positioning seismograph is the key instrument and equipment required for deep seismic exploration in China. In order to measure the performance of seismic data acquisition systems whether meet exploration requirements , to ensure the accuracy of seismic data, and to ensure equipment reliability and stability, a built-in self test solution of the cable-free self-positioning seismic recorder is provided. Within a 24-bits Σ-Δ DAC, the seismograph can produce sine, step, pulse and other high-precision analog test signal, with dynamic range of 120dB or more, through the FPGA to control the analog multiplexer switching the input signal acquisition channels, and start the 24-bit Σ-Δ ADC in the instrument internal simultaneously to acquisition the test signal data, carries on the fast Fournier transformation by instrument internal CPU, to achieve the instrument of analysis and calculation of performance indicators, including: the equivalent noise and drift, common mode rejection ratio (CMRR), crosstalk, harmonic distortion, dynamic range, channel response consistency, detector impulse response , etc. A lot of testing experiments about the various parameters were performed and studied currently. By setting different sampling rate (1Hz, 5Hz, ..., 4kHz), each of the measurement system noise level was measured, and the maximum noise is about 0.5μV; the crosstalk between channels was tested using the 31.25Hz sine wave, the result is more than-120dB with sampling rate of 1kHz; the harmonic distortion was measured by adding the high-precision sine wave signals of different frequencies, such as 500Hz, 250 Hz, 125 Hz, 62.5 Hz, 31.25 Hz, 15.625 Hz, 7.812 Hz, 3.90625Hz, etc. the calculated results is in-118dB or more. The experimental results show that, the parameters of the cable-free self-positioning of the seismic recorder meet the technical requirements for the deep exploration, compared to the corresponding parameters with the 428XL seismograph of the French Sercel company, the instrument in performance has reached the advanced level of overseas equipment.

BitTorious volunteer: server-side extensions for centrally-managed volunteer storage in BitTorrent swarms.

PubMed

Lee, Preston V; Dinu, Valentin

2015-11-04

Our publication of the BitTorious portal [1] demonstrated the ability to create a privatized distributed data warehouse of sufficient magnitude for real-world bioinformatics studies using minimal changes to the standard BitTorrent tracker protocol. In this second phase, we release a new server-side specification to accept anonymous philantropic storage donations by the general public, wherein a small portion of each user's local disk may be used for archival of scientific data. We have implementated the server-side announcement and control portions of this BitTorrent extension into v3.0.0 of the BitTorious portal, upon which compatible clients may be built. Automated test cases for the BitTorious Volunteer extensions have been added to the portal's v3.0.0 release, supporting validation of the "peer affinity" concept and announcement protocol introduced by this specification. Additionally, a separate reference implementation of affinity calculation has been provided in C++ for informaticians wishing to integrate into libtorrent-based projects. The BitTorrent "affinity" extensions as provided in the BitTorious portal reference implementation allow data publishers to crowdsource the extreme storage prerequisites for research in "big data" fields. With sufficient awareness and adoption of BitTorious Volunteer-based clients by the general public, the BitTorious portal may be able to provide peta-scale storage resources to the scientific community at relatively insignificant financial cost.

Random bit generation at tunable rates using a chaotic semiconductor laser under distributed feedback.

PubMed

Li, Xiao-Zhou; Li, Song-Sui; Zhuang, Jun-Ping; Chan, Sze-Chun

2015-09-01

A semiconductor laser with distributed feedback from a fiber Bragg grating (FBG) is investigated for random bit generation (RBG). The feedback perturbs the laser to emit chaotically with the intensity being sampled periodically. The samples are then converted into random bits by a simple postprocessing of self-differencing and selecting bits. Unlike a conventional mirror that provides localized feedback, the FBG provides distributed feedback which effectively suppresses the information of the round-trip feedback delay time. Randomness is ensured even when the sampling period is commensurate with the feedback delay between the laser and the grating. Consequently, in RBG, the FBG feedback enables continuous tuning of the output bit rate, reduces the minimum sampling period, and increases the number of bits selected per sample. RBG is experimentally investigated at a sampling period continuously tunable from over 16 ns down to 50 ps, while the feedback delay is fixed at 7.7 ns. By selecting 5 least-significant bits per sample, output bit rates from 0.3 to 100 Gbps are achieved with randomness examined by the National Institute of Standards and Technology test suite.

Implications of scaling on static RAM bit cell stability and reliability

NASA Astrophysics Data System (ADS)

Coones, Mary Ann; Herr, Norm; Bormann, Al; Erington, Kent; Soorholtz, Vince; Sweeney, John; Phillips, Michael

1993-01-01

In order to lower manufacturing costs and increase performance, static random access memory (SRAM) bit cells are scaled progressively toward submicron geometries. The reliability of an SRAM is highly dependent on the bit cell stability. Smaller memory cells with less capacitance and restoring current make the array more susceptible to failures from defectivity, alpha hits, and other instabilities and leakage mechanisms. Improving long term reliability while migrating to higher density devices makes the task of building in and improving reliability increasingly difficult. Reliability requirements for high density SRAMs are very demanding with failure rates of less than 100 failures per billion device hours (100 FITs) being a common criteria. Design techniques for increasing bit cell stability and manufacturability must be implemented in order to build in this level of reliability. Several types of analyses are performed to benchmark the performance of the SRAM device. Examples of these analysis techniques which are presented here include DC parametric measurements of test structures, functional bit mapping of the circuit used to characterize the entire distribution of bits, electrical microprobing of weak and/or failing bits, and system and accelerated soft error rate measurements. These tests allow process and design improvements to be evaluated prior to implementation on the final product. These results are used to provide comprehensive bit cell characterization which can then be compared to device models and adjusted accordingly to provide optimized cell stability versus cell size for a particular technology. The result is designed in reliability which can be accomplished during the early stages of product development.

Feasibilty of a Multi-bit Cell Perpendicular Magnetic Tunnel Junction Device

NASA Astrophysics Data System (ADS)

Kim, Chang Soo

The ultimate objective of this research project was to explore the feasibility of making a multi-bit cell perpendicular magnetic tunnel junction (PMTJ) device to increase the storage density of spin-transfer-torque random access memory (STT-RAM). As a first step toward demonstrating a multi-bit cell device, this dissertation contributed a systematic and detailed study of developing a single cell PMTJ device using L10 FePt films. In the beginning of this research, 13 up-and-coming non-volatile memory (NVM) technologies were investigated and evaluated to see whether one of them might outperform NAND flash memories and even HDDs on a cost-per-TB basis in 2020. This evaluation showed that STT-RAM appears to potentially offer superior power efficiency, among other advantages. It is predicted that STTRAM's density could make it a promising candidate for replacing NAND flash memories and possibly HDDs if STTRAM could be improved to store multiple bits per cell. Ta/Mg0 under-layers were used first in order to develop (001) L1 0 ordering of FePt at a low temperature of below 400 °C. It was found that the tradeoff between surface roughness and (001) L10 ordering of FePt makes it difficult to achieve low surface roughness and good perpendicular magnetic properties simultaneously when Ta/Mg0 under-layers are used. It was, therefore, decided to investigate MgO/CrRu under-layers to simultaneously achieve smooth films with good ordering below 400°C. A well ordered 4 nm L10 FePt film with RMS surface roughness close to 0.4 nm, perpendicular coercivity of about 5 kOe, and perpendicular squareness near 1 was obtained at a deposition temperature of 390 °C on a thermally oxidized Si substrate when MgO/CrRu under-layers are used. A PMTJ device was developed by depositing a thin MgO tunnel barrier layer and a top L10 FePt film and then being postannealed at 450 °C for 30 minutes. It was found that the sputtering power needs to be minimized during the thin MgO tunnel barrier deposition because the high sputtering power can degrade perpendicular magnetic anisotropy of the bottom L1 0 FePt film and also increase RMS film surface roughness of the MgO tunnel barrier layer. From a lithographically unpatterned PMTJ sample, MR ratio and RA were measured at room temperature by the CIPT method and found to be 138% and 6.4 kOmicrom2, respectively. A completed PMTJ test pattern with a junction size of 80x40 microm2 was fabricated and showed a measured MR ratio and RA product of 108% and 4~6 kOmicrom 2, respectively. These values agree relatively well with the corresponding values of 138% and 6.4 kOmicrom2 obtained from the unpatterned PMTJ sample measured by a current-in-plane tunneling (CIPT) method.

Line-of-Sight Data Link Test Set

DTIC Science & Technology

1976-06-01

spheric layer model for layer refraction or a surface reflectivity model for ground reflection paths. Measurement of the channel impulse response...the model is exercised over a path consisting of only a constant direct component. The test would consist of measuring the modem demodulator bit...direct and a fading direct component. The test typically would consist of measuring the bit error-rate over a range of average signal-to-noise

An approach to built-in test for shipboard machinery systems

NASA Astrophysics Data System (ADS)

Hegner, H. R.

This paper presents an approach for incorporating built-in test (BIT) into shipboard machinery systems. BIT, as used herein, denotes both built-in test and on-line monitoring. Since sensors are a key element to a successful machinery monitoring system, an assessment of shipboard sensors is included in the paper. Specific design examples are also presented for a marine diesel engine, gas turbine engine, and air conditioning plant.

The Debate of Evolution versus Intelligent Design: Is Critical Thinking Occurring among K-12 Students?

ERIC Educational Resources Information Center

Hoodman, Kyle Nathan

2010-01-01

This study investigates how evolution versus intelligent design is handled in the public, private Christian, private Jewish, and Christian Home-school K-12 settings through a review of the current literature and by interviewing teachers in these educational venues. Fourteen public, private, and homeschool educators responded to an interview…

What Does Neuroscience and Cognitive Psychology Tell Us about Multiple Intelligence

ERIC Educational Resources Information Center

Bauer, Richard H.

2009-01-01

Studies that have used noninvasive brain imaging techniques to record neocortical activity while individuals were performing cognitive intelligence tests (traditional intelligence) and social intelligence tests were reviewed. In cognitive intelligence tests 16 neocortical areas were active, whereas in social intelligence 10 areas were active.…

Command and Control Related Computer Technology. Part I. Packet Radio. Part II. Speech Compression and Evaluation

DTIC Science & Technology

1975-12-01

d g k p t VOWELS: a (father) I (bit) LIST *■ / ! ( /• 1 b d C k P t —a ( i I b d g k P t —I...7. 1 D d g k P t —I 1 ( *; 1 b d g k P t —a 1 -. -?■. 1 b d C k P --a ( y /j-; 1 b d E k...1. Nakatani, Lloyd H. and Kathleen D . Dukes, Sensitive Tes * of Speech Communication Quality. J. Acoust. Soc. Amer., Vol. 53, pp. 1083-1092,

Intelligent Testing: Integrating Psychological Theory and Clinical Practice

ERIC Educational Resources Information Center

Kaufman, James C., Ed.

2009-01-01

The field of intelligence testing has been revolutionized by Alan S. Kaufman. He developed the Wechsler Intelligence Scale for Children-Revised (WISC-R) with David Wechsler, and his best-selling book, Intelligent Testing with the WISC-R, introduced the phrase "intelligent testing." Kaufman, with his wife, Nadeen, then created his own…

A "Nonbiased Assessment" of Intelligence Testing.

ERIC Educational Resources Information Center

Vandivier, Phillip L.; Vandivier, Stella Sue

1979-01-01

Discusses the most widely used individual intelligence tests: Wechsler Intelligence Scale for Children (WISC) and Stanford-Binet Intelligence Scale (Form L-M). Covers what the tests measure; psychometric or technical properties of the tests; and how test results are used. (JOW)

Relation between fluid intelligence and frontal lobe functioning in older adults.

PubMed

Isingrini, M; Vazou, F

1997-01-01

This study reports the relations among normal aging, intelligence, and frontal lobe functioning. Intelligence tasks and frontal lobe functioning tasks were administered to 107 adults from two age groups (25 to 46 years and 70 to 99 years). Intelligence measures were assessed with two crystallized tests (WAIS Vocabulary and Information subtests), one fluid intelligence test (Cattell's Matrices), and one mixed, crystallized and fluid test (WAIS Similarities subtest). Frontal functioning was assessed using the Wisconsin Card Sorting Test (WCST) and two tests of verbal fluency. Significant age differences in favor of the young were found on the two intelligence tests with a fluid component and on all measures of frontal lobe functioning. Correlational analyses examining the relationship of intelligence measures to frontal variables indicated that these last measures were significantly correlated with only fluid intelligence tests in the elderly group. The implications for the relations among aging, fluid intelligence, and frontal lobe functioning are discussed.

The OCA CCD Camera Controller

DTIC Science & Technology

1996-01-01

multi CCD arrays for wide field telescopes with an array of 8x8 1K CCDs in use at Las Campanas Observatory in Chile . The same group is also involved...Verify key EPROM -292H VIH . VIH Program security bitl 1 29AH . VPP Program security’ bit 2 *. .298H -Vpp Verify security bits - 9HVIH ViI NOTE: 1...Pulsed from V.. to VIL and returned to VIH . EPROM PROGRAMMING AND VERIFICATION ..t= 21’C to-+27 ’rC:-VCC= 5V ±10%VS3 = OV. SYMBOL I .-- PARAMETER MIN MAX

Intelligent data analysis: the best approach for chronic heart failure (CHF) follow up management.

PubMed

Mohammadzadeh, Niloofar; Safdari, Reza; Baraani, Alireza; Mohammadzadeh, Farshid

2014-08-01

Intelligent data analysis has ability to prepare and present complex relations between symptoms and diseases, medical and treatment consequences and definitely has significant role in improving follow-up management of chronic heart failure (CHF) patients, increasing speed ​​and accuracy in diagnosis and treatments; reducing costs, designing and implementation of clinical guidelines. The aim of this article is to describe intelligent data analysis methods in order to improve patient monitoring in follow and treatment of chronic heart failure patients as the best approach for CHF follow up management. Minimum data set (MDS) requirements for monitoring and follow up of CHF patient designed in checklist with six main parts. All CHF patients that discharged in 2013 from Tehran heart center have been selected. The MDS for monitoring CHF patient status were collected during 5 months in three different times of follow up. Gathered data was imported in RAPIDMINER 5 software. Modeling was based on decision trees methods such as C4.5, CHAID, ID3 and k-Nearest Neighbors algorithm (K-NN) with k=1. Final analysis was based on voting method. Decision trees and K-NN evaluate according to Cross-Validation. Creating and using standard terminologies and databases consistent with these terminologies help to meet the challenges related to data collection from various places and data application in intelligent data analysis. It should be noted that intelligent analysis of health data and intelligent system can never replace cardiologists. It can only act as a helpful tool for the cardiologist's decisions making.

Current State of an Intelligent System to Aid in Tephra Layer Correlation

NASA Astrophysics Data System (ADS)

Hanson-Hedgecock, S.; Bursik, M.; Rogova, G.

2007-12-01

We are developing a computer based intelligent system to correlate tephra layers by using the lithologic, mineralogic, and geochemical characteristics of field samples, to aid geologists in interpreting eruption patterns of volcanic chains and fields. The intelligent system is used to define groups of tephra source vents by utilizing geochemical data, and to correlate tephra layers based on lithostratigraphic characteristics. Understanding the eruption history of a volcano from stratigraphic studies is important for forecasting future eruptive behavior and hazards. In volcanic chains and fields with a complex eruptive history and no central vent, determining the spatio- temporal eruption patterns is difficult. Sedimentologic and chemical variability, and sparse sampling often result in relatively large variances and imprecision in the dataset. Lithostratigraphic and geochemical interpretation also depends on ones' level of expertise and can be subjective. The processing of lithostratigraphic features is conducted by a hybrid classifier, composed of supervised artificial neural networks (ANNs) combined within the framework of the Dempster-Shafer theory of evidence. Since lithostratigraphic features vary with distance from source, hypothetical vent locations are determined by using expert domain knowledge and geostatistical methods. Geochemical data are processed by a suit of fuzzy k- means classifiers. Each fuzzy k-means classifier assigns observations to multiple clusters with various degrees, called membership coefficients. The assignment minimizes a function of the total distance between the centers of clusters and the individual geochemical data patterns weighed by the membership coefficients. Improved clustering results of geochemical data are achieved by the fusion of individual clustering results with an evidential combination method. Lithostratigraphic data from individual tephra beds of the North Mono eruption sequence are used to test the effectiveness of the intelligent system for tephra layer correlation. Geochemical data from tephra bedsets of the Mono and Inyo Craters, CA, are used to test the effectiveness of the intelligent system for eruption sequence correlation. The intelligent system aids correlation by showing matches and disparities between data patterns from different outcrops that may have been overlooked in initial interpretations. Initial results show that the lithostratigraphic classifier is able to accurately differentiate known layers 76% of the time. Output from the lithostratigraphic classifier can furthermore be plotted directly as isopleth maps that can aid in rapid recognition of tephra layers as well as determination of eruption characteristics, e.g. eruption volume, plume height, etc. The intelligent system produces a useful recognition result, while dealing with the uncertainty from sparse data and the imprecise description of layer characteristics.

Seismic Stability Evaluation of Folsom Dam and Reservoir Project. Report 4. Mormon Island Auxiliary Dam. Phase 1

DTIC Science & Technology

1990-12-01

soundings were made with a Felcon bit which is a 3- web crowd-in bit for 6-5/8-in. casing but has an enlarged diameter near the bit (7-1/4-in. OD) and...Fed Figure 40. Becker Htammer drilling rig Figure 41. Three- web crowd-in Felcon bit for open-bit penetration testing and sampling, and eight-tooth crowd...0 000 l’ U 900 o US U 0 m wIX = r = 0 c 1 ,- 2 cc w > uW~- 0 .4-t)t UO: >. N m Cj U 0 (I uuja:o o o oH 00 U~~ u C1 to F-4 m 0 0 V) V) 0) NN 00_

Experiments on a repetitively pulsed electrothermal thruster

NASA Technical Reports Server (NTRS)

Burton, R. L.; Fleischer, D.; Goldstein, S. A.; Tidman, D. A.

1987-01-01

This paper presents experimental results from an investigation of a pulsed electrothermal (PET) thruster using water propellant. The PET thruster is operated on a calibrated thrust stand, and produces a thrust to power ratio of T/P = 0.07 + or - 0.01 N/kW. The discharge conditions are inferred from a numerical model which predicts pressure and temperature levels of 300-500 atm and 20,000 K, respectively. These values in turn correctly predict the measured values of impulse bit and discharge resistance. The inferred ideal exhaust velocity from these conditions is 17 km/sec, but the injection of water propellant produces a test tank background pressure of 10-20 Torr, which reduces the exhaust velocity to 14 km/sec. This value corresponds to a thrust efficiency of 54 + or - 7 percent when all experimental errors are taken into account.

Are vision-specific quality of life questionnaires important in assessing rehabilitation for patients with hemianopia post stroke?

PubMed

George, Stacey; Hayes, Allison; Chen, Celia; Crotty, Maria

2011-01-01

To explore the relationship between disability and functional measures with vision-specific quality of life (QoL) measures for people with hemianopia and stroke. The Behavioral Inattention Test (BIT) and the Mayo-Portland Adaptability Inventory (MPAI) were compared with scores on 2 vision-specific QoL measures, the National Eye Institute Visual Function Questionnaire (NEI VFQ-25) and Veteran Low Vision Visual Function Questionnaire (VA LV VFQ-48). Rehabilitation hospitals in Adelaide, South Australia. Stroke patients (n = 24) with homonymous hemianopia. Most of the BIT and MPAI scores were significantly associated with the NEI VFQ-25 and VA LV VFQ-48 scores. Behavioral test scores of the BIT and the MPAI total score correlated with more aspects of the QoL measures than the other components of the BIT and the MPAI. BIT and MPAI measure constructs associated with QoL for people with hemianopia following stroke. Vision-specific QoL questionnaires can complement the functional instruments by identifying the domains of difficulty, based on the instrument's subscale, that can guide rehabilitation therapists to address the person's deficit.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Modeste Nguimdo, Romain, E-mail: Romain.Nguimdo@vub.ac.be; Tchitnga, Robert; Woafo, Paul

We numerically investigate the possibility of using a coupling to increase the complexity in simplest chaotic two-component electronic circuits operating at high frequency. We subsequently show that complex behaviors generated in such coupled systems, together with the post-processing are suitable for generating bit-streams which pass all the NIST tests for randomness. The electronic circuit is built up by unidirectionally coupling three two-component (one active and one passive) oscillators in a ring configuration through resistances. It turns out that, with such a coupling, high chaotic signals can be obtained. By extracting points at fixed interval of 10 ns (corresponding to a bitmore » rate of 100 Mb/s) on such chaotic signals, each point being simultaneously converted in 16-bits (or 8-bits), we find that the binary sequence constructed by including the 10(or 2) least significant bits pass statistical tests of randomness, meaning that bit-streams with random properties can be achieved with an overall bit rate up to 10×100 Mb/s =1Gbit/s (or 2×100 Mb/s =200 Megabit/s). Moreover, by varying the bias voltages, we also investigate the parameter range for which more complex signals can be obtained. Besides being simple to implement, the two-component electronic circuit setup is very cheap as compared to optical and electro-optical systems.« less

Yoga therapy for developing emotional intelligence in mid-life managers.

PubMed

Ganpat, Tikhe Sham; Nagendra, H R

2011-01-01

Business executives' lives have become a never-ending race against time, technology, and targets. This race creates tension, which leads to dissatisfaction and frustration and eventually manifests itself as psychological and physiological stress with mental and emotional drain. This modern lifestyle intensifies the stress leading to "excessive tension" and consequent deterioration in "executive efficiency". To assess emotional intelligent quotient (EQ) in managers undergoing yoga-based Self Management of Excessive Tension (SMET) program. 72 managers participated in this study which is of "single group pre-post design." The EQ test developed by Prof N. K. Chadha from University of Delhi was administered as pre and post the 5 days of SMET program. Means, standard deviations, Kolmogorov-Smirnov test, and Wilcoxon signed rank test were used to analyze the data. The data analysis showed 72.02% significant increase (P<0.001) in EQ. The results suggest that participation in a SMET program was associated with improvement in EQ and may have implications for "executive efficiency."

Intelligence Fusion Modeling. A Proposed Approach.

DTIC Science & Technology

1983-09-16

based techniques developed by artificial intelligence researchers. This paper describes the application of these techniques in the modeling of an... intelligence requirements, although the methods presented are applicable . We treat PIR/IR as given. -7- -- -W V"W v* 1.- . :71.,v It k*~ ~-- Movement...items from the PIR/IR/HVT decomposition are received from the CMDS. Formatted tactical intelligence reports are received from sensors of like types

Center for Artificial Intelligence

DTIC Science & Technology

1992-03-14

builder’s intelligent assistant. The basic approach of IGOR is to integrate the complementary strategies of exploratory and confirmatory data analysis...Recovery: A Model and Experiments," in Proceedings of the Ninth National Conference on Artifcial Intelligence , Anaheim, CA, July 1991, pp. 801-808. Howe...Lehnert University of Massachusetts, Amherst, MAJ (413) 545-1322 Lessei•:s.umass.edu Title: Center for Artificial Intelligence Contract #: N00014-86-K

Generalizing on Multiple Grounds: Performance Learning in Model-Based Troubleshooting

DTIC Science & Technology

1989-02-01

Aritificial Intelligence , 24, 1984. [Ble88] Guy E. Blelloch. Scan Primitives and Parallel Vector Models. PhD thesis, Artificial Intelligence Laboratory...Diagnostic reasoning based on strcture and behavior. Aritificial Intelligence , 24, 1984. [dK86] J. de Kleer. An assumption-based truth maintenance system...diagnosis. Aritificial Intelligence , 24. �. )3 94 BIBLIOGRAPHY [Ham87] Kristian J. Hammond. Learning to anticipate and avoid planning prob- lems

The Personal Intelligences: Promoting Social and Emotional Learning.

ERIC Educational Resources Information Center

Ellison, Launa

This book blends two of the multiple intelligences (intrapersonal and interpersonal) with current research on the brain and learning to create a new foundation for K-8 classrooms. It shares a teacher's classroom practices linking brain functions with the development of interpersonal and intrapersonal intelligence. Nine chapters include (1)…

28 CFR 16.74 - Exemption of National Security Division Systems-limited access.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Privacy Act pursuant to 5 U.S.C. 552a(j)(2), (k)(1), (2) and (5): Foreign Intelligence and... concerning him or her would hinder authorized United States intelligence activities by informing that...) Subsection (d)(1). Disclosure of foreign intelligence and counterintelligence information would interfere...

28 CFR 16.74 - Exemption of National Security Division Systems-limited access.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Privacy Act pursuant to 5 U.S.C. 552a(j)(2), (k)(1), (2) and (5): Foreign Intelligence and... concerning him or her would hinder authorized United States intelligence activities by informing that...) Subsection (d)(1). Disclosure of foreign intelligence and counterintelligence information would interfere...

28 CFR 16.74 - Exemption of National Security Division Systems-limited access.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Privacy Act pursuant to 5 U.S.C. 552a(j)(2), (k)(1), (2) and (5): Foreign Intelligence and... concerning him or her would hinder authorized United States intelligence activities by informing that...) Subsection (d)(1). Disclosure of foreign intelligence and counterintelligence information would interfere...

28 CFR 16.74 - Exemption of National Security Division Systems-limited access.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Privacy Act pursuant to 5 U.S.C. 552a(j)(2), (k)(1), (2) and (5): Foreign Intelligence and... concerning him or her would hinder authorized United States intelligence activities by informing that...) Subsection (d)(1). Disclosure of foreign intelligence and counterintelligence information would interfere...

Review of Army Analysis. Volume 2. Appendixes C-M

DTIC Science & Technology

1979-04-01

In most Army studies, the identifica-tion of new or changed alternatives occurs during the study de - spite efforts at early deflnition, Study...in time to support each major acquisition de -V..i cision milestone, Operational testing activities are similiarly timed, Thus, it frequently occurs...Engineer School i. Transportation School J. Quarter Master School k. Missile & Munition School 1. Intelligence School ! m. Signal School ii. Military

Lateral charge transport from heavy-ion tracks in integrated circuit chips

NASA Technical Reports Server (NTRS)

Zoutendyk, J. A.; Schwartz, H. R.; Nevill, L. R.

1988-01-01

A 256K DRAM has been used to study the lateral transport of charge (electron-hole pairs) induced by direct ionization from heavy-ion tracks in an IC. The qualitative charge transport has been simulated using a two-dimensional numerical code in cylindrical coordinates. The experimental bit-map data clearly show the manifestation of lateral charge transport in the creation of adjacent multiple-bit errors from a single heavy-ion track. The heavy-ion data further demonstrate the occurrence of multiple-bit errors from single ion tracks with sufficient stopping power. The qualitative numerical simulation results suggest that electric-field-funnel-aided (drift) collection accounts for single error generated by an ion passing through a charge-collecting junction, while multiple errors from a single ion track are due to lateral diffusion of ion-generated charge.

Purpose-built PDC bit successfully drills 7-in liner equipment and formation: An integrated solution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Puennel, J.G.A.; Huppertz, A.; Huizing, J.

1996-12-31

Historically, drilling out the 7-in, liner equipment has been a time consuming operation with a limited success ratio. The success of the operation is highly dependent on the type of drill bit employed. Tungsten carbide mills and mill tooth rock bits required from 7.5 to 11.5 hours respectively to drill the pack-off bushings, landing collar, shoe track and shoe. Rates of penetration dropped dramatically when drilling the float equipment. While conventional PDC bits have drilled the liner equipment successfully (averaging 9.7 hours), severe bit damage invariably prevented them from continuing to drill the formation at cost-effective penetration rates. This papermore » describes the integrated development and application of an IADC M433 Class PDC bit, which was designed specifically to drill out the 7-in. liner equipment and continue drilling the formation at satisfactory penetration rates. The development was the result of a joint investigation There the operator and bit/liner manufacturers shared their expertise in solving a drilling problem, The heavy-set bit was developed following drill-off tests conducted to investigate the drillability of the 7-in. liner equipment. Key features of the new bit and its application onshore The Netherlands will be presented and analyzed.« less

Electrical Characterization of Hughes HCMP 1852D and RCA CDP1852D 8-bit, CMOS, I/O Ports

NASA Technical Reports Server (NTRS)

Stokes, R. L.

1979-01-01

Twenty-five Hughes HCMP 1852D and 25 RCA CDP1852D 8-bit, CMOS, I/O port microcircuits underwent electrical characterization tests. All electrical measurements were performed on a Tektronix S-3260 Test System. Before electrical testing, the devices were subjected to a 168-hour burn-in at 125 C with the inputs biased at 10V. Four of the Hughes parts became inoperable during testing. They exhibited functional failures and out-of-range parametric measurements after a few runs of the test program.

An Experimental Study of Cutting Performances of Worn Picks

NASA Astrophysics Data System (ADS)

Dogruoz, Cihan; Bolukbasi, Naci; Rostami, Jamal; Acar, Cemil

2016-01-01

The best means to assess rock cuttability and efficiency of cutting process for using mechanical excavation is specific energy (SE), measured in full-scale rock cutting test. This is especially true for the application of roadheaders, often fitted with drag-type cutting tools. Radial picks or drag bits are changed during the operation as they reach a certain amount of wear and become blunt. In this study, full-scale cutting tests in different sedimentary rock types with bits having various degree of wear were used to evaluate the influence of bit wear on cutting forces and specific energy. The relationship between the amount of wear as represented by the size of the wear flats at the tip of the bit, and cutting forces as well as specific energy was examined. The influence of various rock properties such as mineral content, uniaxial compressive strength, tensile strength, indentation index, shore hardness, Schmidt hammer hardness, and density with required SE of cutting using different levels of tool wear was also studied. The preliminary analysis of the data shows that the mean cutting forces increase 2-3 times and SE by 4-5 times when cutting with 4 mm wear flat as compared to cutting with new or sharp wedge shape bits. The grain size distribution of the muck for cutting different rock types and different level of bit wear was analyzed and discussed. The best fit prediction models for SE based on statistical analysis of laboratory test results are introduced. The model can be used for estimating the performance of mechanical excavators using radial tools, especially roadheaders, continuous miners and longwall drum shearers.

Technology For Command, Control, Communications And Intelligence (C3I)

NASA Astrophysics Data System (ADS)

Burgess, John S.

1980-02-01

I am happy to be here this morning with this distinguished technical audience of the Society of Photo-Optical Instrumentation Engineers. You have recognized a very important problem area and I think that through this conference or seminar, you will address many technical aspects of the problems associated with Command, Control, Communications and Intelligence (C³I). C³I is a term that is gaining more and more visibility and acceptance in all areas of military operations. In the past, the transfer of technology into military operations has been concentrated on force effectiveness. Our leaders now recognize more fully that force effectiveness depends to a very high degree on the command and control functions which in turn need to know the status of enemy as well as friendly forces. Perhaps the best way to start this discussion of C³I is to arrive at a definition. Unfortunately, I'm sure that if I ask each of you to give me a definition of C³I, I would have just as many definitions as there are people in the audience. The situation is similar to the old story about the three blind men trying to describe an elephant. I would like to paraphrase a few remarks of Julian Lake in a recent editorial in Military Electronics/Countermeasures Magazine. As he points out, C3 is many things to many people. To the intelligence specialist who is so wrapped up in his intelligence community activity, C³I is simply an extension of the modern applications of intelligence. In fact, the intelligence officer feels that he is the actual center of the C³I structure. On the other hand, the communications specialist thinks that communications is the actual heartbeat of C³I activity, and this is right to a point because communications is a fundamental building block of the C3 function. The computer specialist will point out that C³I is merely a product of the computer age. One reason there was very little done about C³I in the past was the nonavailability of computer techniques and consequently this is what has really made C³I possible. The radar man believes that this other stuff is absolutely useless without information about the activities of the enemy other than those derived through the intelligence community. The display technologist feels that without some means of presenting this information to the commander, the process is meaningless. The commander needs to absorb a large amount of information quickly. Jerry Lawson of the Naval Electronics Systems Command has pointed out that in a typical situation, there will be at least twenty to one hundred objects about which the commander must be informed. For each of these objects, it can be shown that he will need an absolute minimum of about 300 bits of data before he can be an effective transducer of information into decisions and directives. Studies have shown however, that the human brain can process only 25 - 40 bits of information per second when they are presented as a time sequential string such as in a printed message. This implies that it would take about 15 minutes for the commander to understand what was going on; and the picture is changing continuously. Yet, our common experience tells us that we can easily process three million bits per second when they are presented as a two-dimensional picture. Thus, we have no alternative but to present the commander with a picture, a geographic display, so that he can absorb the large number of spatial relationships among the things with which he must deal. Moreover, on a plot of this type, we can express much of the data by the size and the color of the symbols we use to mark the location of things. Consequently, three important measures of the efficiency of this process are the locational accuracy, the informational accuracy and the timeliness of the picture which is presented.

Canadian Native Intelligence Studies: A Brief Review.

ERIC Educational Resources Information Center

Senior, Sharon

1993-01-01

Reviews the literature on (1) the nature of intelligence; (2) controversy over the use of standardized intelligence tests with cultural minority groups; (3) arguments surrounding intelligence testing of Canadian Native students; (4) language barriers in standardized intelligence testing; and (5) the effects of self-concept and parent educational…

Use of One Time Pad Algorithm for Bit Plane Security Improvement

NASA Astrophysics Data System (ADS)

Suhardi; Suwilo, Saib; Budhiarti Nababan, Erna

2017-12-01

BPCS (Bit-Plane Complexity Segmentation) which is one of the steganography techniques that utilizes the human vision characteristics that cannot see the change in binary patterns that occur in the image. This technique performs message insertion by making a switch to a high-complexity bit-plane or noise-like regions with bits of secret messages. Bit messages that were previously stored precisely result the message extraction process to be done easily by rearranging a set of previously stored characters in noise-like region in the image. Therefore the secret message becomes easily known by others. In this research, the process of replacing bit plane with message bits is modified by utilizing One Time Pad cryptography technique which aims to increase security in bit plane. In the tests performed, the combination of One Time Pad cryptographic algorithm to the steganography technique of BPCS works well in the insertion of messages into the vessel image, although in insertion into low-dimensional images is poor. The comparison of the original image with the stegoimage looks identical and produces a good quality image with a mean value of PSNR above 30db when using a largedimensional image as the cover messages.

The 10 to the 8th power bit solid state spacecraft data recorder. [utilizing bubble domain memory technology

NASA Technical Reports Server (NTRS)

Murray, G. W.; Bohning, O. D.; Kinoshita, R. Y.; Becker, F. J.

1979-01-01

The results are summarized of a program to demonstrate the feasibility of Bubble Domain Memory Technology as a mass memory medium for spacecraft applications. The design, fabrication and test of a partially populated 10 to the 8th power Bit Data Recorder using 100 Kbit serial bubble memory chips is described. Design tradeoffs, design approach and performance are discussed. This effort resulted in a 10 to the 8th power bit recorder with a volume of 858.6 cu in and a weight of 47.2 pounds. The recorder is plug reconfigurable, having the capability of operating as one, two or four independent serial channel recorders or as a single sixteen bit byte parallel input recorder. Data rates up to 1.2 Mb/s in a serial mode and 2.4 Mb/s in a parallel mode may be supported. Fabrication and test of the recorder demonstrated the basic feasibility of Bubble Domain Memory technology for such applications. Test results indicate the need for improvement in memory element operating temperature range and detector performance.

Mixed logic style adder circuit designed and fabricated using SOI substrate for irradiation-hardened experiment

NASA Astrophysics Data System (ADS)

Yuan, Shoucai; Liu, Yamei

2016-08-01

This paper proposed a rail to rail swing, mixed logic style 28-transistor 1-bit full adder circuit which is designed and fabricated using silicon-on-insulator (SOI) substrate with 90 nm gate length technology. The main goal of our design is space application where circuits may be damaged by outer space radiation; so the irradiation-hardened technique such as SOI structure should be used. The circuit's delay, power and power-delay product (PDP) of our proposed gate diffusion input (GDI)-based adder are HSPICE simulated and compared with other reported high-performance 1-bit adder. The GDI-based 1-bit adder has 21.61% improvement in delay and 18.85% improvement in PDP, over the reported 1-bit adder. However, its power dissipation is larger than that reported with 3.56% increased but is still comparable. The worst case performance of proposed 1-bit adder circuit is also seen to be less sensitive to variations in power supply voltage (VDD) and capacitance load (CL), over a wide range from 0.6 to 1.8 V and 0 to 200 fF, respectively. The proposed and reported 1-bit full adders are all layout designed and wafer fabricated with other circuits/systems together on one chip. The chip measurement and analysis has been done at VDD = 1.2 V, CL = 20 fF, and 200 MHz maximum input signal frequency with temperature of 300 K.

Results from Testing Crew-Controlled Surface Telerobotics on the International Space Station

NASA Technical Reports Server (NTRS)

Bualat, Maria; Schreckenghost, Debra; Pacis, Estrellina; Fong, Terrence; Kalar, Donald; Beutter, Brent

2014-01-01

During Summer 2013, the Intelligent Robotics Group at NASA Ames Research Center conducted a series of tests to examine how astronauts in the International Space Station (ISS) can remotely operate a planetary rover. The tests simulated portions of a proposed lunar mission, in which an astronaut in lunar orbit would remotely operate a planetary rover to deploy a radio telescope on the lunar far side. Over the course of Expedition 36, three ISS astronauts remotely operated the NASA "K10" planetary rover in an analogue lunar terrain located at the NASA Ames Research Center in California. The astronauts used a "Space Station Computer" (crew laptop), a combination of supervisory control (command sequencing) and manual control (discrete commanding), and Ku-band data communications to command and monitor K10 for 11 hours. In this paper, we present and analyze test results, summarize user feedback, and describe directions for future research.

Intelligence Testing and Minority Students: Foundations, Performance Factors, and Assessment Issues. Racial and Ethnic Minority Psychology Series.

ERIC Educational Resources Information Center

Valencia, Richard R.; Suzuki, Lisa A.

This book examines intelligence assessment among ethnic minority children. Part 1, "Foundations," includes: (1) "Historical Issues" (e.g., emergence of intelligence testing in Europe and ideology of the intelligence testing movement); and (2) "Multicultural Perspective of Intelligence: Theory and Measurement Issues"…

Protective Role of Parenting Attitude on the Behavioral and Neurocognitive Development of the Children from Economically Disadvantaged Families.

PubMed

Jung, Da-Eun; Bhang, Soo-Young; Lee, Won-Hye; Yoon, Hae-Joo; Jung, Hee-Yeon; Kim, Yeni

2018-06-01

Association between home environment and the behavioral and neurocognitive development of children from a community childcare center for low-income families was examined (aged 6 to 12 years, n=155). The parents performed a questionnaire on home environment (K-HOME-Q) to assess home environment including parenting attitude and the Child Behavior Checklist (K-CBCL). The children performed the Wechsler Intelligence (IQ) Scale, Stroop interference test (Stroop), word fluency test (WF), and design fluency test (DF) to assess their neurocognitive development. 'Nurturing of Development' and 'Variety of Language Interaction' scores from the K-HOME-Q, were inversely associated with total behavior problems, externalization, rule-breaking, and aggressive behavior subscales of K-CBCL, and 'Emotional atmosphere' and 'Tolerance toward the child' scores showed inverse associations with the total behavior problems, rule-breaking, aggressive behavior, and withdrawn/depressed subscales. Despite economic hardship, the mean scores of the neurocognitive tests were comparable to the average level of Korean children's normative sample. However, 'Nurturing of Development' and 'Tolerance toward the Child' score of K-HOME-Q were associated with better executive function (IQ, WF, DF). These results suggest that parental stimulation of development and tolerant parenting attitude may offer protection against the negative effects of suboptimal economic environment on children's behavior and neurocognitive development.

An Overview of Intelligence Testing.

ERIC Educational Resources Information Center

White, Margaret B.; Hall, Alfred E.

1980-01-01

This article briefly traces the development of intelligence testing from its beginnings in 1905 with Alfred Binet; cites the intelligence theories of Spearman, Thurstone, and Guilford; and examines current objections to intelligence tests in terms of what they test and how they are interpreted. (SJL)

Universal Decoder for PPM of any Order

NASA Technical Reports Server (NTRS)

Moision, Bruce E.

2010-01-01

A recently developed algorithm for demodulation and decoding of a pulse-position- modulation (PPM) signal is suitable as a basis for designing a single hardware decoding apparatus to be capable of handling any PPM order. Hence, this algorithm offers advantages of greater flexibility and lower cost, in comparison with prior such algorithms, which necessitate the use of a distinct hardware implementation for each PPM order. In addition, in comparison with the prior algorithms, the present algorithm entails less complexity in decoding at large orders. An unavoidably lengthy presentation of background information, including definitions of terms, is prerequisite to a meaningful summary of this development. As an aid to understanding, the figure illustrates the relevant processes of coding, modulation, propagation, demodulation, and decoding. An M-ary PPM signal has M time slots per symbol period. A pulse (signifying 1) is transmitted during one of the time slots; no pulse (signifying 0) is transmitted during the other time slots. The information intended to be conveyed from the transmitting end to the receiving end of a radio or optical communication channel is a K-bit vector u. This vector is encoded by an (N,K) binary error-correcting code, producing an N-bit vector a. In turn, the vector a is subdivided into blocks of m = log2(M) bits and each such block is mapped to an M-ary PPM symbol. The resultant coding/modulation scheme can be regarded as equivalent to a nonlinear binary code. The binary vector of PPM symbols, x is transmitted over a Poisson channel, such that there is obtained, at the receiver, a Poisson-distributed photon count characterized by a mean background count nb during no-pulse time slots and a mean signal-plus-background count of ns+nb during a pulse time slot. In the receiver, demodulation of the signal is effected in an iterative soft decoding process that involves consideration of relationships among photon counts and conditional likelihoods of m-bit vectors of coded bits. Inasmuch as the likelihoods of all the m-bit vectors of coded bits mapping to the same PPM symbol are correlated, the best performance is obtained when the joint mbit conditional likelihoods are utilized. Unfortunately, the complexity of decoding, measured in the number of operations per bit, grows exponentially with m, and can thus become prohibitively expensive for large PPM orders. For a system required to handle multiple PPM orders, the cost is even higher because it is necessary to have separate decoding hardware for each order. This concludes the prerequisite background information. In the present algorithm, the decoding process as described above is modified by, among other things, introduction of an lbit marginalizer sub-algorithm. The term "l-bit marginalizer" signifies that instead of m-bit conditional likelihoods, the decoder computes l-bit conditional likelihoods, where l is fixed. Fixing l, regardless of the value of m, makes it possible to use a single hardware implementation for any PPM order. One could minimize the decoding complexity and obtain an especially simple design by fixing l at 1, but this would entail some loss of performance. An intermediate solution is to fix l at some value, greater than 1, that may be less than or greater than m. This solution makes it possible to obtain the desired flexibility to handle any PPM order while compromising between complexity and loss of performance.

Mathematical modeling of PDC bit drilling process based on a single-cutter mechanics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wojtanowicz, A.K.; Kuru, E.

1993-12-01

An analytical development of a new mechanistic drilling model for polycrystalline diamond compact (PDC) bits is presented. The derivation accounts for static balance of forces acting on a single PDC cutter and is based on assumed similarity between bit and cutter. The model is fully explicit with physical meanings given to all constants and functions. Three equations constitute the mathematical model: torque, drilling rate, and bit life. The equations comprise cutter`s geometry, rock properties drilling parameters, and four empirical constants. The constants are used to match the model to a PDC drilling process. Also presented are qualitative and predictive verificationsmore » of the model. Qualitative verification shows that the model`s response to drilling process variables is similar to the behavior of full-size PDC bits. However, accuracy of the model`s predictions of PDC bit performance is limited primarily by imprecision of bit-dull evaluation. The verification study is based upon the reported laboratory drilling and field drilling tests as well as field data collected by the authors.« less

Comparison of Intelligibility Measures for Adults with Parkinson's Disease, Adults with Multiple Sclerosis, and Healthy Controls

ERIC Educational Resources Information Center

Stipancic, Kaila L.; Tjaden, Kris; Wilding, Gregory

2016-01-01

Purpose: This study obtained judgments of sentence intelligibility using orthographic transcription for comparison with previously reported intelligibility judgments obtained using a visual analog scale (VAS) for individuals with Parkinson's disease and multiple sclerosis and healthy controls (K. Tjaden, J. E. Sussman, & G. E. Wilding, 2014).…

A Comparative Study of Heavy Ion and Proton Induced Bit Error Sensitivity and Complex Burst Error Modes in Commercially Available High Speed SiGe BiCMOS

NASA Technical Reports Server (NTRS)

Marshall, Paul; Carts, Marty; Campbell, Art; Reed, Robert; Ladbury, Ray; Seidleck, Christina; Currie, Steve; Riggs, Pam; Fritz, Karl; Randall, Barb

2004-01-01

A viewgraph presentation that reviews recent SiGe bit error test data for different commercially available high speed SiGe BiCMOS chips that were subjected to various levels of heavy ion and proton radiation. Results for the tested chips at different operating speeds are displayed in line graphs.

Built-in-Test Verification Techniques

DTIC Science & Technology

1987-02-01

report documents the results of the effort for the Rome Air Development Center Contract F30602-84-C-0021, BIT Verification Techniques. The work was...Richard Spillman of Sp.,llman Research Associates. The principal investigators were Mike Partridge and subsequently Jeffrey Albert. The contract was...two your effort to develop techniques for Built-In Test (BIT) verification. The objective of the contract was to develop specifications and technical

Chip-integrated optical power limiter based on an all-passive micro-ring resonator

NASA Astrophysics Data System (ADS)

Yan, Siqi; Dong, Jianji; Zheng, Aoling; Zhang, Xinliang

2014-10-01

Recent progress in silicon nanophotonics has dramatically advanced the possible realization of large-scale on-chip optical interconnects integration. Adopting photons as information carriers can break the performance bottleneck of electronic integrated circuit such as serious thermal losses and poor process rates. However, in integrated photonics circuits, few reported work can impose an upper limit of optical power therefore prevent the optical device from harm caused by high power. In this study, we experimentally demonstrate a feasible integrated scheme based on a single all-passive micro-ring resonator to realize the optical power limitation which has a similar function of current limiting circuit in electronics. Besides, we analyze the performance of optical power limiter at various signal bit rates. The results show that the proposed device can limit the signal power effectively at a bit rate up to 20 Gbit/s without deteriorating the signal. Meanwhile, this ultra-compact silicon device can be completely compatible with the electronic technology (typically complementary metal-oxide semiconductor technology), which may pave the way of very large scale integrated photonic circuits for all-optical information processors and artificial intelligence systems.

Data acquisition electronics for gamma ray emission tomography using width-modulated leading-edge discriminators

NASA Astrophysics Data System (ADS)

Lage, E.; Tapias, G.; Villena, J.; Desco, M.; Vaquero, J. J.

2010-08-01

We present a new high-performance and low-cost approach for implementing radiation detection acquisition systems. The basic elements used are charge-integrating ADCs and a set of components encapsulated in an HDL (hardware definition language) library which makes it possible to implement several acquisition tasks such as time pickoff and coincidence detection using a new and simple trigger technique that we name WMLET (width-modulated leading-edge timing). As proof of concept, a 32-channel hybrid PET/SPECT acquisition system based on these elements was developed and tested. This demonstrator consists of a master module responsible for the generation and distribution of trigger signals, 2 × 16-channel ADC cards (12-bit resolution) for data digitization and a 32-bit digital I/O PCI card for handling data transmission to a personal computer. System characteristics such as linearity, maximum transmission rates or timing resolution in coincidence mode were evaluated with test and real detector signals. Imaging capabilities of the prototype were also evaluated using different detector configurations. The performance tests showed that this implementation is able to handle data rates in excess of 600k events s-1 when acquiring simultaneously 32 channels (96-byte events). ADC channel linearity is >98.5% in energy quantification. Time resolution in PET mode for the tested configurations ranges from 3.64 ns FWHM to 7.88 ns FWHM when signals from LYSO-based detectors are used. The measured energy resolution matched the expected values for the detectors evaluated and single elements of crystal matrices can be neatly separated in the acquired flood histograms.

Data acquisition electronics for gamma ray emission tomography using width-modulated leading-edge discriminators.

PubMed

Lage, E; Tapias, G; Villena, J; Desco, M; Vaquero, J J

2010-08-07

We present a new high-performance and low-cost approach for implementing radiation detection acquisition systems. The basic elements used are charge-integrating ADCs and a set of components encapsulated in an HDL (hardware definition language) library which makes it possible to implement several acquisition tasks such as time pickoff and coincidence detection using a new and simple trigger technique that we name WMLET (width-modulated leading-edge timing). As proof of concept, a 32-channel hybrid PET/SPECT acquisition system based on these elements was developed and tested. This demonstrator consists of a master module responsible for the generation and distribution of trigger signals, 2 x 16-channel ADC cards (12-bit resolution) for data digitization and a 32-bit digital I/O PCI card for handling data transmission to a personal computer. System characteristics such as linearity, maximum transmission rates or timing resolution in coincidence mode were evaluated with test and real detector signals. Imaging capabilities of the prototype were also evaluated using different detector configurations. The performance tests showed that this implementation is able to handle data rates in excess of 600k events s(-1) when acquiring simultaneously 32 channels (96-byte events). ADC channel linearity is >98.5% in energy quantification. Time resolution in PET mode for the tested configurations ranges from 3.64 ns FWHM to 7.88 ns FWHM when signals from LYSO-based detectors are used. The measured energy resolution matched the expected values for the detectors evaluated and single elements of crystal matrices can be neatly separated in the acquired flood histograms.

Intelligence, IQ and Race--When, How and Why They Became Associated.

ERIC Educational Resources Information Center

Joseph, Andre

The history and use of intelligence testing are reviewed, with emphasis on the validity of intelligence tests for black populations. Different definitions of intelligence are summarized, followed by an historical review of intelligence testing. The work of Alfred Binet is discussed, as well as the validity and reliability of his scales. A…

Acquisition and Retaining Granular Samples via a Rotating Coring Bit

NASA Technical Reports Server (NTRS)

Bar-Cohen, Yoseph; Badescu, Mircea; Sherrit, Stewart

2013-01-01

This device takes advantage of the centrifugal forces that are generated when a coring bit is rotated, and a granular sample is entered into the bit while it is spinning, making it adhere to the internal wall of the bit, where it compacts itself into the wall of the bit. The bit can be specially designed to increase the effectiveness of regolith capturing while turning and penetrating the subsurface. The bit teeth can be oriented such that they direct the regolith toward the bit axis during the rotation of the bit. The bit can be designed with an internal flute that directs the regolith upward inside the bit. The use of both the teeth and flute can be implemented in the same bit. The bit can also be designed with an internal spiral into which the various particles wedge. In another implementation, the bit can be designed to collect regolith primarily from a specific depth. For that implementation, the bit can be designed such that when turning one way, the teeth guide the regolith outward of the bit and when turning in the opposite direction, the teeth will guide the regolith inward into the bit internal section. This mechanism can be implemented with or without an internal flute. The device is based on the use of a spinning coring bit (hollow interior) as a means of retaining granular sample, and the acquisition is done by inserting the bit into the subsurface of a regolith, soil, or powder. To demonstrate the concept, a commercial drill and a coring bit were used. The bit was turned and inserted into the soil that was contained in a bucket. While spinning the bit (at speeds of 600 to 700 RPM), the drill was lifted and the soil was retained inside the bit. To prove this point, the drill was turned horizontally, and the acquired soil was still inside the bit. The basic theory behind the process of retaining unconsolidated mass that can be acquired by the centrifugal forces of the bit is determined by noting that in order to stay inside the interior of the bit, the frictional force must be greater than the weight of the sample. The bit can be designed with an internal sleeve to serve as a container for granular samples. This tube-shaped component can be extracted upon completion of the sampling, and the bottom can be capped by placing the bit onto a corklike component. Then, upon removal of the internal tube, the top section can be sealed. The novel features of this device are: center dot A mechanism of acquiring and retaining granular samples using a coring bit without a closed door. center dot An acquisition bit that has internal structure such as a waffle pattern for compartmentalizing or helical internal flute to propel the sample inside the bit and help in acquiring and retaining granular samples. center dot A bit with an internal spiral into which the various particles wedge. center dot A design that provides a method of testing frictional properties of the granular samples and potentially segregating particles based on size and density. A controlled acceleration or deceleration may be used to drop the least-frictional particles or to eventually shear the unconsolidated material near the bit center.

Effect of bit wear on hammer drill handle vibration and productivity.

PubMed

Antonucci, Andrea; Barr, Alan; Martin, Bernard; Rempel, David

2017-08-01

The use of large electric hammer drills exposes construction workers to high levels of hand vibration that may lead to hand-arm vibration syndrome and other musculoskeletal disorders. The aim of this laboratory study was to investigate the effect of bit wear on drill handle vibration and drilling productivity (e.g., drilling time per hole). A laboratory test bench system was used with an 8.3 kg electric hammer drill and 1.9 cm concrete bit (a typical drill and bit used in commercial construction). The system automatically advanced the active drill into aged concrete block under feed force control to a depth of 7.6 cm while handle vibration was measured according to ISO standards (ISO 5349 and 28927). Bits were worn to 4 levels by consecutive hole drilling to 4 cumulative drilling depths: 0, 1,900, 5,700, and 7,600 cm. Z-axis handle vibration increased significantly (p<0.05) from 4.8 to 5.1 m/s 2 (ISO weighted) and from 42.7-47.6 m/s 2 (unweighted) when comparing a new bit to a bit worn to 1,900 cm of cumulative drilling depth. Handle vibration did not increase further with bits worn more than 1900 cm of cumulative drilling depth. Neither x- nor y-axis handle vibration was effected by bit wear. The time to drill a hole increased by 58% for the bit with 5,700 cm of cumulative drilling depth compared to a new bit. Bit wear led to a small but significant increase in both ISO weighted and unweighted z-axis handle vibration. Perhaps more important, bit wear had a large effect on productivity. The effect on productivity will influence a worker's allowable daily drilling time if exposure to drill handle vibration is near the ACGIH Threshold Limit Value. [1] Construction contractors should implement a bit replacement program based on these findings.

The microcomputer workstation - An alternate hardware architecture for remotely sensed image analysis

NASA Technical Reports Server (NTRS)

Erickson, W. K.; Hofman, L. B.; Donovan, W. E.

1984-01-01

Difficulties regarding the digital image analysis of remotely sensed imagery can arise in connection with the extensive calculations required. In the past, an expensive large to medium mainframe computer system was needed for performing these calculations. For image-processing applications smaller minicomputer-based systems are now used by many organizations. The costs for such systems are still in the range from $100K to $300K. Recently, as a result of new developments, the use of low-cost microcomputers for image processing and display systems appeared to have become feasible. These developments are related to the advent of the 16-bit microprocessor and the concept of the microcomputer workstation. Earlier 8-bit microcomputer-based image processing systems are briefly examined, and a computer workstation architecture is discussed. Attention is given to a microcomputer workstation developed by Stanford University, and the design and implementation of a workstation network.

High Resolution, High Precision I-Line Stepper Processing

NASA Astrophysics Data System (ADS)

Yanazawa, H.; Hasegawa, N.; Kurosaki, T.; Hashimoto, N.; Nonogaki, S.

1985-06-01

Currently, the integrated MOS dynamic RAM has as many as 256 thousand memory cells per chip based on 2 pm photolithography. Figure 1 shows the history and the prospects for progress in microfabrication technology. Feature size versus year, as reported by Bossung in 1978, is shown, as developed from independent analysis by Moore, Noyce and Gnostic concept. Circles numbered 1 and 2 show that 64K- and 256K-bit RAMs were developed in 1981 and 1984, and that their feature sizes were 3μm and 2μm, respectively. It is significant that the predictions and the real developments are so close. Furthermore, since the basic process for 3 M-bit RAMs based on 1.3μm microlithography has already been reported in conference, it is highly likely that they will become commercially available around 1987, as predicted by the circle numbered 3 based on 1.3μm microlithography.

Josephson 4 K-bit cache memory design for a prototype signal processor. I - General overview

NASA Astrophysics Data System (ADS)

Henkels, W. H.; Geppert, L. M.; Kadlec, J.; Epperlein, P. W.; Beha, H.

1985-09-01

In the early stages of thg Josephson computer project conducted at an American computer company, it was recognized that a very fast cache memory was needed to complement Josephson logic. A subnanosecond access time memory was implemented experimentally on the basis of a 2.5-micron Pb-alloy technology. It was then decided to switch over to a Nb-base-electrode technology with the objective to alleviate problems with the long-term reliability and aging of Pb-based junctions. The present paper provides a general overview of the status of a 4 x 1 K-bit Josephson cache design employing a 2.5-micron Nb-edge-junction technology. Attention is given to the fabrication process and its implications, aspects of circuit design methodology, an overview of system environment and chip components, design changes and status, and various difficulties and uncertainties.

A Novel Quantum Image Steganography Scheme Based on LSB

NASA Astrophysics Data System (ADS)

Zhou, Ri-Gui; Luo, Jia; Liu, XingAo; Zhu, Changming; Wei, Lai; Zhang, Xiafen

2018-06-01

Based on the NEQR representation of quantum images and least significant bit (LSB) scheme, a novel quantum image steganography scheme is proposed. The sizes of the cover image and the original information image are assumed to be 4 n × 4 n and n × n, respectively. Firstly, the bit-plane scrambling method is used to scramble the original information image. Then the scrambled information image is expanded to the same size of the cover image by using the key only known to the operator. The expanded image is scrambled to be a meaningless image with the Arnold scrambling. The embedding procedure and extracting procedure are carried out by K 1 and K 2 which are under control of the operator. For validation of the presented scheme, the peak-signal-to-noise ratio (PSNR), the capacity, the security of the images and the circuit complexity are analyzed.

Bit Grooming: statistically accurate precision-preserving quantization with compression, evaluated in the netCDF Operators (NCO, v4.4.8+)

NASA Astrophysics Data System (ADS)

Zender, Charles S.

2016-09-01

Geoscientific models and measurements generate false precision (scientifically meaningless data bits) that wastes storage space. False precision can mislead (by implying noise is signal) and be scientifically pointless, especially for measurements. By contrast, lossy compression can be both economical (save space) and heuristic (clarify data limitations) without compromising the scientific integrity of data. Data quantization can thus be appropriate regardless of whether space limitations are a concern. We introduce, implement, and characterize a new lossy compression scheme suitable for IEEE floating-point data. Our new Bit Grooming algorithm alternately shaves (to zero) and sets (to one) the least significant bits of consecutive values to preserve a desired precision. This is a symmetric, two-sided variant of an algorithm sometimes called Bit Shaving that quantizes values solely by zeroing bits. Our variation eliminates the artificial low bias produced by always zeroing bits, and makes Bit Grooming more suitable for arrays and multi-dimensional fields whose mean statistics are important. Bit Grooming relies on standard lossless compression to achieve the actual reduction in storage space, so we tested Bit Grooming by applying the DEFLATE compression algorithm to bit-groomed and full-precision climate data stored in netCDF3, netCDF4, HDF4, and HDF5 formats. Bit Grooming reduces the storage space required by initially uncompressed and compressed climate data by 25-80 and 5-65 %, respectively, for single-precision values (the most common case for climate data) quantized to retain 1-5 decimal digits of precision. The potential reduction is greater for double-precision datasets. When used aggressively (i.e., preserving only 1-2 digits), Bit Grooming produces storage reductions comparable to other quantization techniques such as Linear Packing. Unlike Linear Packing, whose guaranteed precision rapidly degrades within the relatively narrow dynamic range of values that it can compress, Bit Grooming guarantees the specified precision throughout the full floating-point range. Data quantization by Bit Grooming is irreversible (i.e., lossy) yet transparent, meaning that no extra processing is required by data users/readers. Hence Bit Grooming can easily reduce data storage volume without sacrificing scientific precision or imposing extra burdens on users.

Experimental realization of a Szilard engine with a single electron.

PubMed

Koski, Jonne V; Maisi, Ville F; Pekola, Jukka P; Averin, Dmitri V

2014-09-23

The most succinct manifestation of the second law of thermodynamics is the limitation imposed by the Landauer principle on the amount of heat a Maxwell demon (MD) can convert into free energy per single bit of information obtained in a measurement. We propose and realize an electronic MD based on a single-electron box operated as a Szilard engine, where kBT ln 2 of heat is extracted from the reservoir at temperature T per one bit of created information. The information is encoded in the position of an extra electron in the box.

Clinical evaluation of watermarked medical images.

PubMed

Zain, Jasni M; Fauzi, Abdul M; Aziz, Azian A

2006-01-01

Digital watermarking medical images provides security to the images. The purpose of this study was to see whether digitally watermarked images changed clinical diagnoses when assessed by radiologists. We embedded 256 bits watermark to various medical images in the region of non-interest (RONI) and 480K bits in both region of interest (ROI) and RONI. Our results showed that watermarking medical images did not alter clinical diagnoses. In addition, there was no difference in image quality when visually assessed by the medical radiologists. We therefore concluded that digital watermarking medical images were safe in terms of preserving image quality for clinical purposes.

Performance analysis of visible light communication using the STBC-OFDM technique for intelligent transportation systems

NASA Astrophysics Data System (ADS)

Li, Changping; Yi, Ying; Lee, Kyujin; Lee, Kyesan

2014-08-01

Visible light communication (VLC) applied in an intelligent transportation system (ITS) has attracted growing attentions, but it also faces challenges, for example deep path loss and optical multi-path dispersion. In this work, we modelled an actual outdoor optical channel as a Rician channel and further proposed space-time block coding (STBC) orthogonal frequency-division multiplexing (OFDM) technology to reduce the influence of severe optical multi-path dispersion associated with such a mock channel for achieving the effective BER of 10-6 even at a low signal-to-noise ratio (SNR). In this case, the optical signals transmission distance can be extended as long as possible. Through the simulation results of STBC-OFDM and single-input-single-output (SISO) counterparts in bit error rate (BER) performance comparison, we can distinctly observe that the VLC-ITS system using STBC-OFDM technique can obtain a strongly improved BER performance due to multi-path dispersion alleviation.

Measuring Nursing Value from the Electronic Health Record.

PubMed

Welton, John M; Harper, Ellen M

2016-01-01

We report the findings of a big data nursing value expert group made up of 14 members of the nursing informatics, leadership, academic and research communities within the United States tasked with 1. Defining nursing value, 2. Developing a common data model and metrics for nursing care value, and 3. Developing nursing business intelligence tools using the nursing value data set. This work is a component of the Big Data and Nursing Knowledge Development conference series sponsored by the University Of Minnesota School Of Nursing. The panel met by conference calls for fourteen 1.5 hour sessions for a total of 21 total hours of interaction from August 2014 through May 2015. Primary deliverables from the bit data expert group were: development and publication of definitions and metrics for nursing value; construction of a common data model to extract key data from electronic health records; and measures of nursing costs and finance to provide a basis for developing nursing business intelligence and analysis systems.

Quantization noise in digital speech. M.S. Thesis- Houston Univ.

NASA Technical Reports Server (NTRS)

Schmidt, O. L.

1972-01-01

The amount of quantization noise generated in a digital-to-analog converter is dependent on the number of bits or quantization levels used to digitize the analog signal in the analog-to-digital converter. The minimum number of quantization levels and the minimum sample rate were derived for a digital voice channel. A sample rate of 6000 samples per second and lowpass filters with a 3 db cutoff of 2400 Hz are required for 100 percent sentence intelligibility. Consonant sounds are the first speech components to be degraded by quantization noise. A compression amplifier can be used to increase the weighting of the consonant sound amplitudes in the analog-to-digital converter. An expansion network must be installed at the output of the digital-to-analog converter to restore the original weighting of the consonant sounds. This technique results in 100 percent sentence intelligibility for a sample rate of 5000 samples per second, eight quantization levels, and lowpass filters with a 3 db cutoff of 2000 Hz.

Age Effects on Wechsler Adult Intelligence Scale-Revised Tests.

ERIC Educational Resources Information Center

Sattler, Jerome M.

1982-01-01

Studied age norms for 11 individual Wechsler Adult Intelligence Scale-Revised (WAIS-R) tests. Digit Symbol showed the most decline. Results suggest that fluid intelligence, as measured by the performance scale tests, shows more of a decline with age than crystallized intelligence, as measured by the verbal scale tests. (Author)

Efficient and robust quantum random number generation by photon number detection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Applegate, M. J.; Cavendish Laboratory, University of Cambridge, 19 JJ Thomson Avenue, Cambridge CB3 0HE; Thomas, O.

2015-08-17

We present an efficient and robust quantum random number generator based upon high-rate room temperature photon number detection. We employ an electric field-modulated silicon avalanche photodiode, a type of device particularly suited to high-rate photon number detection with excellent photon number resolution to detect, without an applied dead-time, up to 4 photons from the optical pulses emitted by a laser. By both measuring and modeling the response of the detector to the incident photons, we are able to determine the illumination conditions that achieve an optimal bit rate that we show is robust against variation in the photon flux. Wemore » extract random bits from the detected photon numbers with an efficiency of 99% corresponding to 1.97 bits per detected photon number yielding a bit rate of 143 Mbit/s, and verify that the extracted bits pass stringent statistical tests for randomness. Our scheme is highly scalable and has the potential of multi-Gbit/s bit rates.« less

Children Becoming More Intelligent: Can the Flynn Effect Be Generalized to Other Child Intelligence Tests?

ERIC Educational Resources Information Center

Resing, Wilma C. M.; Tunteler, Erika

2007-01-01

In this article, time effects on intelligence test scores have been investigated. In particular, we examined whether the "Flynn effect" is manifest in children from the middle and higher IQ distribution range, measured with a child intelligence test based on information processing principles--the Leiden Diagnostic Test. The test was administered…

640-Gbit/s fast physical random number generation using a broadband chaotic semiconductor laser

NASA Astrophysics Data System (ADS)

Zhang, Limeng; Pan, Biwei; Chen, Guangcan; Guo, Lu; Lu, Dan; Zhao, Lingjuan; Wang, Wei

2017-04-01

An ultra-fast physical random number generator is demonstrated utilizing a photonic integrated device based broadband chaotic source with a simple post data processing method. The compact chaotic source is implemented by using a monolithic integrated dual-mode amplified feedback laser (AFL) with self-injection, where a robust chaotic signal with RF frequency coverage of above 50 GHz and flatness of ±3.6 dB is generated. By using 4-least significant bits (LSBs) retaining from the 8-bit digitization of the chaotic waveform, random sequences with a bit-rate up to 640 Gbit/s (160 GS/s × 4 bits) are realized. The generated random bits have passed each of the fifteen NIST statistics tests (NIST SP800-22), indicating its randomness for practical applications.

Reed Solomon codes for error control in byte organized computer memory systems

NASA Technical Reports Server (NTRS)

Lin, S.; Costello, D. J., Jr.

1984-01-01

A problem in designing semiconductor memories is to provide some measure of error control without requiring excessive coding overhead or decoding time. In LSI and VLSI technology, memories are often organized on a multiple bit (or byte) per chip basis. For example, some 256K-bit DRAM's are organized in 32Kx8 bit-bytes. Byte oriented codes such as Reed Solomon (RS) codes can provide efficient low overhead error control for such memories. However, the standard iterative algorithm for decoding RS codes is too slow for these applications. Some special decoding techniques for extended single-and-double-error-correcting RS codes which are capable of high speed operation are presented. These techniques are designed to find the error locations and the error values directly from the syndrome without having to use the iterative algorithm to find the error locator polynomial.

A kilobyte rewritable atomic memory

NASA Astrophysics Data System (ADS)

Kalff, Floris; Rebergen, Marnix; Fahrenfort, Nora; Girovsky, Jan; Toskovic, Ranko; Lado, Jose; FernáNdez-Rossier, JoaquíN.; Otte, Sander

The ability to manipulate individual atoms by means of scanning tunneling microscopy (STM) opens op opportunities for storage of digital data on the atomic scale. Recent achievements in this direction include data storage based on bits encoded in the charge state, the magnetic state, or the local presence of single atoms or atomic assemblies. However, a key challenge at this stage is the extension of such technologies into large-scale rewritable bit arrays. We demonstrate a digital atomic-scale memory of up to 1 kilobyte (8000 bits) using an array of individual surface vacancies in a chlorine terminated Cu(100) surface. The chlorine vacancies are found to be stable at temperatures up to 77 K. The memory, crafted using scanning tunneling microscopy at low temperature, can be read and re-written automatically by means of atomic-scale markers, and offers an areal density of 502 Terabits per square inch, outperforming state-of-the-art hard disk drives by three orders of magnitude.

Bitshuffle: Filter for improving compression of typed binary data

NASA Astrophysics Data System (ADS)

Masui, Kiyoshi

2017-12-01

Bitshuffle rearranges typed, binary data for improving compression; the algorithm is implemented in a python/C package within the Numpy framework. The library can be used alongside HDF5 to compress and decompress datasets and is integrated through the dynamically loaded filters framework. Algorithmically, Bitshuffle is closely related to HDF5's Shuffle filter except it operates at the bit level instead of the byte level. Arranging a typed data array in to a matrix with the elements as the rows and the bits within the elements as the columns, Bitshuffle "transposes" the matrix, such that all the least-significant-bits are in a row, etc. This transposition is performed within blocks of data roughly 8kB long; this does not in itself compress data, but rearranges it for more efficient compression. A compression library is necessary to perform the actual compression. This scheme has been used for compression of radio data in high performance computing.

Un Abus des Tests d'Intelligence dans les Ecoles Francaises du Nord-Est de l'Ontario (Abuse of Intelligence Tests in French Schools in Northeast Ontario).

ERIC Educational Resources Information Center

Gauthier, Yvon

1993-01-01

Twenty-four French-speaking students in a northeast Ontario (Canada) elementary school were administered an intelligence test in grades three, five, and eight. Significant differences among the three testings raise concerns about the practice of intelligence testing among cultural minority populations. Such tests should not be administered to all…

Invisible Obstacles on the Implementation of Multiple Intelligences Theory in K-8 Classrooms in Turkey

ERIC Educational Resources Information Center

Kaya, Osman Nafiz; Ebenezer, Jazlin

2006-01-01

The aim of this study was to investigate the factors affecting the implementation of Multiple Intelligences (MI) Theory in K-8 classrooms in Turkey. First, it was made meetings in small groups (3 or 4) with 38 teachers in one of the first MI schools in Turkey during the first semesters. They were 22 elementary teachers from Grades 1 to 5 and 16…

High Temperature 300°C Directional Drilling System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chatterjee, Kamalesh; Aaron, Dick; Macpherson, John

2015-07-31

Many countries around the world, including the USA, have untapped geothermal energy potential. Enhanced Geothermal Systems (EGS) technology is needed to economically utilize this resource. Temperatures in some EGS reservoirs can exceed 300°C. To effectively utilize EGS resources, an array of injector and production wells must be accurately placed in the formation fracture network. This requires a high temperature directional drilling system. Most commercial services for directional drilling systems are rated for 175°C while geothermal wells require operation at much higher temperatures. Two U.S. Department of Energy (DOE) Geothermal Technologies Program (GTP) projects have been initiated to develop a 300°Cmore » capable directional drilling system, the first developing a drill bit, directional motor, and drilling fluid, and the second adding navigation and telemetry systems. This report is for the first project, “High Temperature 300°C Directional Drilling System, including drill bit, directional motor and drilling fluid, for enhanced geothermal systems,” award number DE-EE0002782. The drilling system consists of a drill bit, a directional motor, and drilling fluid. The DOE deliverables are three prototype drilling systems. We have developed three drilling motors; we have developed four roller-cone and five Kymera® bits; and finally, we have developed a 300°C stable drilling fluid, along with a lubricant additive for the metal-to-metal motor. Metal-to-metal directional motors require coatings to the rotor and stator for wear and corrosion resistance, and this coating research has been a significant part of the project. The drill bits performed well in the drill bit simulator test, and the complete drilling system has been tested drilling granite at Baker Hughes’ Experimental Test Facility in Oklahoma. The metal-to-metal motor was additionally subjected to a flow loop test in Baker Hughes’ Celle Technology Center in Germany, where it ran for more than 100 hours.« less

Internet Protocol Security (IPSEC): Testing and Implications on IPv4 and IPv6 Networks

DTIC Science & Technology

2008-08-27

Message Authentication Code-Message Digest 5-96). Due to the processing power consumption and slowness of public key authentication methods, RSA ...MODP) group with a 768 -bit modulus 2. a MODP group with a 1024-bit modulus 3. an Elliptic Curve Group over GF[ 2n ] (EC2N) group with a 155-bit...nonces, digital signatures using the Digital Signature Algorithm, and the Rivest-Shamir- Adelman ( RSA ) algorithm. For more information about the

Practised Intelligence Testing Based on a Modern Test Conceptualization and Its Reference to the Common Intelligence Theories

ERIC Educational Resources Information Center

Kubinger, Klaus D.; Litzenberger, Margarete; Mrakotsky, Christine

2006-01-01

The question is to what extent intelligence test-batteries prove any kind of empirical reference to common intelligence theories. Of particular interest are conceptualized tests that are of a high psychometric standard--those that fit the Rasch model--and hence are not exposed to fundamental critique. As individualized testing, i.e., a…

[Study of ocular surface electromyography signal analysis].

PubMed

Zhu, Bei; Qi, Li-Ping

2009-11-01

Test ocular surface electromyography signal waves and characteristic parameters to provide effective data for the diagnosis and treatment of ocular myopathy. Surface electromyography signals tests were performed in 140 normal volunteers and 30 patients with ophthalmoplegia. Surface electrodes were attached to medial canthi, lateral canthi and the middle of frontal bone. Then some alternate flashing red lamps were installed on perimeter to reduce the movement of eyeball. The computer hardware, software, and A/D adapter (12 Bit) were used. Sampling frequency could be selected within 40 kHz, frequency of amplifier was 2 kHz, and input short circuit noise was less than 3 microV. For normal volunteers, the ocular surface electromyography signals were regular, and the electric waves were similar between different sex groups and age groups. While for patients with ophthalmoplegia, the wave amplitude of ocular surface electromyography signals were declined or disappeared in the dyskinesia direction. The wave amplitude was related with the degree of pathological process. The characteristic parameters of patients with ophthalmoplegia were higher than normal volunteers. The figures of ocular surface electromyogram obtained from normal volunteers were obviously different with that from patients with ophthalmoplegia. This test can provide reliable quantized data for the diagnosis and treatment of ocular myopathy.

New Rock-Drilling Method in 'Mars Yard' Test

NASA Image and Video Library

2017-10-23

This photo taken in the "Mars Yard" at NASA's Jet Propulsion Laboratory, Pasadena, California, on Aug. 1, 2017, shows a step in development of possible alternative techniques that NASA's Curiosity Mars rover might be able to use to resume drilling into rocks on Mars. In late 2016, after Curiosity's drill had collected sample material from 15 Martian rocks in four years, the drill's feed mechanism ceased working reliably. That motorized mechanism moved the bit forward or back with relation to stabilizer posts on either side of the bit. In normal drilling by Curiosity, the stabilizers were positioned on the target rock first, and then the feed mechanism extended the rotation-percussion bit into the rock. In the alternative technique seen here, called "feed-extended drilling," the test rover's stabilizers are not used to touch the rock. The bit is advanced into the rock by motion of the robotic arm rather than the drill's feed mechanism. https://photojournal.jpl.nasa.gov/catalog/PIA22062

DECHADE: DEtecting slight Changes with HArd DEcisions in Wireless Sensor Networks

NASA Astrophysics Data System (ADS)

Ciuonzo, D.; Salvo Rossi, P.

2018-07-01

This paper focuses on the problem of change detection through a Wireless Sensor Network (WSN) whose nodes report only binary decisions (on the presence/absence of a certain event to be monitored), due to bandwidth/energy constraints. The resulting problem can be modelled as testing the equality of samples drawn from independent Bernoulli probability mass functions, when the bit probabilities under both hypotheses are not known. Both One-Sided (OS) and Two-Sided (TS) tests are considered, with reference to: (i) identical bit probability (a homogeneous scenario), (ii) different per-sensor bit probabilities (a non-homogeneous scenario) and (iii) regions with identical bit probability (a block-homogeneous scenario) for the observed samples. The goal is to provide a systematic framework collecting a plethora of viable detectors (designed via theoretically founded criteria) which can be used for each instance of the problem. Finally, verification of the derived detectors in two relevant WSN-related problems is provided to show the appeal of the proposed framework.

Brave New World of Intelligence Testing.

ERIC Educational Resources Information Center

Rice, Berkeley

1979-01-01

New approaches to assessing intelligence are discussed, as well as new intelligence tests. Among the developments are investigating neurometrics, adapting testing to the effects of technology on children, countering cultural bias, assessing social intelligence, focusing on aspects of cognitive styles, measuring learning potential, and using…

Intelligent Integrated System Health Management

NASA Technical Reports Server (NTRS)

Figueroa, Fernando

2012-01-01

Intelligent Integrated System Health Management (ISHM) is the management of data, information, and knowledge (DIaK) with the purposeful objective of determining the health of a system (Management: storage, distribution, sharing, maintenance, processing, reasoning, and presentation). Presentation discusses: (1) ISHM Capability Development. (1a) ISHM Knowledge Model. (1b) Standards for ISHM Implementation. (1c) ISHM Domain Models (ISHM-DM's). (1d) Intelligent Sensors and Components. (2) ISHM in Systems Design, Engineering, and Integration. (3) Intelligent Control for ISHM-Enabled Systems

Applying EVM to Satellite on Ground and In-Orbit Testing - Better Data in Less Time

NASA Technical Reports Server (NTRS)

Peters, Robert; Lebbink, Elizabeth-Klein; Lee, Victor; Model, Josh; Wezalis, Robert; Taylor, John

2008-01-01

Using Error Vector Magnitude (EVM) in satellite integration and test allows rapid verification of the Bit Error Rate (BER) performance of a satellite link and is particularly well suited to measurement of low bit rate satellite links where it can result in a major reduction in test time (about 3 weeks per satellite for the Geosynchronous Operational Environmental Satellite [GOES] satellites during ground test) and can provide diagnostic information. Empirical techniques developed to predict BER performance from EVM measurements and lessons learned about applying these techniques during GOES N, O, and P integration test and post launch testing, are discussed.

Pseudo-random generator based on Chinese Remainder Theorem

NASA Astrophysics Data System (ADS)

Bajard, Jean Claude; Hördegen, Heinrich

2009-08-01

Pseudo-Random Generators (PRG) are fundamental in cryptography. Their use occurs at different level in cipher protocols. They need to verify some properties for being qualified as robust. The NIST proposes some criteria and a tests suite which gives informations on the behavior of the PRG. In this work, we present a PRG constructed from the conversion between further residue systems of representation of the elements of GF(2)[X]. In this approach, we use some pairs of co-prime polynomials of degree k and a state vector of 2k bits. The algebraic properties are broken by using different independent pairs during the process. Since this method is reversible, we also can use it as a symmetric crypto-system. We evaluate the cost of a such system, taking into account that some operations are commonly implemented on crypto-processors. We give the results of the different NIST Tests and we explain this choice compare to others found in the literature. We describe the behavior of this PRG and explain how the different rounds are chained for ensuring a fine secure randomness.

Spline-based high-accuracy piecewise-polynomial phase-to-sinusoid amplitude converters.

PubMed

Petrinović, Davor; Brezović, Marko

2011-04-01

We propose a method for direct digital frequency synthesis (DDS) using a cubic spline piecewise-polynomial model for a phase-to-sinusoid amplitude converter (PSAC). This method offers maximum smoothness of the output signal. Closed-form expressions for the cubic polynomial coefficients are derived in the spectral domain and the performance analysis of the model is given in the time and frequency domains. We derive the closed-form performance bounds of such DDS using conventional metrics: rms and maximum absolute errors (MAE) and maximum spurious free dynamic range (SFDR) measured in the discrete time domain. The main advantages of the proposed PSAC are its simplicity, analytical tractability, and inherent numerical stability for high table resolutions. Detailed guidelines for a fixed-point implementation are given, based on the algebraic analysis of all quantization effects. The results are verified on 81 PSAC configurations with the output resolutions from 5 to 41 bits by using a bit-exact simulation. The VHDL implementation of a high-accuracy DDS based on the proposed PSAC with 28-bit input phase word and 32-bit output value achieves SFDR of its digital output signal between 180 and 207 dB, with a signal-to-noise ratio of 192 dB. Its implementation requires only one 18 kB block RAM and three 18-bit embedded multipliers in a typical field-programmable gate array (FPGA) device. © 2011 IEEE

Scene-aware joint global and local homographic video coding

NASA Astrophysics Data System (ADS)

Peng, Xiulian; Xu, Jizheng; Sullivan, Gary J.

2016-09-01

Perspective motion is commonly represented in video content that is captured and compressed for various applications including cloud gaming, vehicle and aerial monitoring, etc. Existing approaches based on an eight-parameter homography motion model cannot deal with this efficiently, either due to low prediction accuracy or excessive bit rate overhead. In this paper, we consider the camera motion model and scene structure in such video content and propose a joint global and local homography motion coding approach for video with perspective motion. The camera motion is estimated by a computer vision approach, and camera intrinsic and extrinsic parameters are globally coded at the frame level. The scene is modeled as piece-wise planes, and three plane parameters are coded at the block level. Fast gradient-based approaches are employed to search for the plane parameters for each block region. In this way, improved prediction accuracy and low bit costs are achieved. Experimental results based on the HEVC test model show that up to 9.1% bit rate savings can be achieved (with equal PSNR quality) on test video content with perspective motion. Test sequences for the example applications showed a bit rate savings ranging from 3.7 to 9.1%.

Counter-Rotating Tandem Motor Drilling System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kent Perry

2009-04-30

Gas Technology Institute (GTI), in partnership with Dennis Tool Company (DTC), has worked to develop an advanced drill bit system to be used with microhole drilling assemblies. One of the main objectives of this project was to utilize new and existing coiled tubing and slimhole drilling technologies to develop Microhole Technology (MHT) so as to make significant reductions in the cost of E&P down to 5000 feet in wellbores as small as 3.5 inches in diameter. This new technology was developed to work toward the DOE's goal of enabling domestic shallow oil and gas wells to be drilled inexpensively comparedmore » to wells drilled utilizing conventional drilling practices. Overall drilling costs can be lowered by drilling a well as quickly as possible. For this reason, a high drilling rate of penetration is always desired. In general, high drilling rates of penetration (ROP) can be achieved by increasing the weight on bit and increasing the rotary speed of the bit. As the weight on bit is increased, the cutting inserts penetrate deeper into the rock, resulting in a deeper depth of cut. As the depth of cut increases, the amount of torque required to turn the bit also increases. The Counter-Rotating Tandem Motor Drilling System (CRTMDS) was planned to achieve high rate of penetration (ROP) resulting in the reduction of the drilling cost. The system includes two counter-rotating cutter systems to reduce or eliminate the reactive torque the drillpipe or coiled tubing must resist. This would allow the application of maximum weight-on-bit and rotational velocities that a coiled tubing drilling unit is capable of delivering. Several variations of the CRTDMS were designed, manufactured and tested. The original tests failed leading to design modifications. Two versions of the modified system were tested and showed that the concept is both positive and practical; however, the tests showed that for the system to be robust and durable, borehole diameter should be substantially larger than that of slim holes. As a result, the research team decided to complete the project, document the tested designs and seek further support for the concept outside of the DOE.« less

Stochastic p -Bits for Invertible Logic

NASA Astrophysics Data System (ADS)

Camsari, Kerem Yunus; Faria, Rafatul; Sutton, Brian M.; Datta, Supriyo

2017-07-01

Conventional semiconductor-based logic and nanomagnet-based memory devices are built out of stable, deterministic units such as standard metal-oxide semiconductor transistors, or nanomagnets with energy barriers in excess of ≈40 - 60 kT . In this paper, we show that unstable, stochastic units, which we call "p -bits," can be interconnected to create robust correlations that implement precise Boolean functions with impressive accuracy, comparable to standard digital circuits. At the same time, they are invertible, a unique property that is absent in standard digital circuits. When operated in the direct mode, the input is clamped, and the network provides the correct output. In the inverted mode, the output is clamped, and the network fluctuates among all possible inputs that are consistent with that output. First, we present a detailed implementation of an invertible gate to bring out the key role of a single three-terminal transistorlike building block to enable the construction of correlated p -bit networks. The results for this specific, CMOS-assisted nanomagnet-based hardware implementation agree well with those from a universal model for p -bits, showing that p -bits need not be magnet based: any three-terminal tunable random bit generator should be suitable. We present a general algorithm for designing a Boltzmann machine (BM) with a symmetric connection matrix [J ] (Ji j=Jj i) that implements a given truth table with p -bits. The [J ] matrices are relatively sparse with a few unique weights for convenient hardware implementation. We then show how BM full adders can be interconnected in a partially directed manner (Ji j≠Jj i) to implement large logic operations such as 32-bit binary addition. Hundreds of stochastic p -bits get precisely correlated such that the correct answer out of 233 (≈8 ×1 09) possibilities can be extracted by looking at the statistical mode or majority vote of a number of time samples. With perfect directivity (Jj i=0 ) a small number of samples is enough, while for less directed connections more samples are needed, but even in the former case logical invertibility is largely preserved. This combination of digital accuracy and logical invertibility is enabled by the hybrid design that uses bidirectional BM units to construct circuits with partially directed interunit connections. We establish this key result with extensive examples including a 4-bit multiplier which in inverted mode functions as a factorizer.

Role of test motivation in intelligence testing.

PubMed

Duckworth, Angela Lee; Quinn, Patrick D; Lynam, Donald R; Loeber, Rolf; Stouthamer-Loeber, Magda

2011-05-10

Intelligence tests are widely assumed to measure maximal intellectual performance, and predictive associations between intelligence quotient (IQ) scores and later-life outcomes are typically interpreted as unbiased estimates of the effect of intellectual ability on academic, professional, and social life outcomes. The current investigation critically examines these assumptions and finds evidence against both. First, we examined whether motivation is less than maximal on intelligence tests administered in the context of low-stakes research situations. Specifically, we completed a meta-analysis of random-assignment experiments testing the effects of material incentives on intelligence-test performance on a collective 2,008 participants. Incentives increased IQ scores by an average of 0.64 SD, with larger effects for individuals with lower baseline IQ scores. Second, we tested whether individual differences in motivation during IQ testing can spuriously inflate the predictive validity of intelligence for life outcomes. Trained observers rated test motivation among 251 adolescent boys completing intelligence tests using a 15-min "thin-slice" video sample. IQ score predicted life outcomes, including academic performance in adolescence and criminal convictions, employment, and years of education in early adulthood. After adjusting for the influence of test motivation, however, the predictive validity of intelligence for life outcomes was significantly diminished, particularly for nonacademic outcomes. Collectively, our findings suggest that, under low-stakes research conditions, some individuals try harder than others, and, in this context, test motivation can act as a third-variable confound that inflates estimates of the predictive validity of intelligence for life outcomes.

Role of test motivation in intelligence testing

PubMed Central

Duckworth, Angela Lee; Quinn, Patrick D.; Lynam, Donald R.; Loeber, Rolf; Stouthamer-Loeber, Magda

2011-01-01

Intelligence tests are widely assumed to measure maximal intellectual performance, and predictive associations between intelligence quotient (IQ) scores and later-life outcomes are typically interpreted as unbiased estimates of the effect of intellectual ability on academic, professional, and social life outcomes. The current investigation critically examines these assumptions and finds evidence against both. First, we examined whether motivation is less than maximal on intelligence tests administered in the context of low-stakes research situations. Specifically, we completed a meta-analysis of random-assignment experiments testing the effects of material incentives on intelligence-test performance on a collective 2,008 participants. Incentives increased IQ scores by an average of 0.64 SD, with larger effects for individuals with lower baseline IQ scores. Second, we tested whether individual differences in motivation during IQ testing can spuriously inflate the predictive validity of intelligence for life outcomes. Trained observers rated test motivation among 251 adolescent boys completing intelligence tests using a 15-min “thin-slice” video sample. IQ score predicted life outcomes, including academic performance in adolescence and criminal convictions, employment, and years of education in early adulthood. After adjusting for the influence of test motivation, however, the predictive validity of intelligence for life outcomes was significantly diminished, particularly for nonacademic outcomes. Collectively, our findings suggest that, under low-stakes research conditions, some individuals try harder than others, and, in this context, test motivation can act as a third-variable confound that inflates estimates of the predictive validity of intelligence for life outcomes. PMID:21518867

How Crossover Speeds up Building Block Assembly in Genetic Algorithms.

PubMed

Sudholt, Dirk

2017-01-01

We reinvestigate a fundamental question: How effective is crossover in genetic algorithms in combining building blocks of good solutions? Although this has been discussed controversially for decades, we are still lacking a rigorous and intuitive answer. We provide such answers for royal road functions and OneMax, where every bit is a building block. For the latter, we show that using crossover makes every ([Formula: see text]+[Formula: see text]) genetic algorithm at least twice as fast as the fastest evolutionary algorithm using only standard bit mutation, up to small-order terms and for moderate [Formula: see text] and [Formula: see text]. Crossover is beneficial because it can capitalize on mutations that have both beneficial and disruptive effects on building blocks: crossover is able to repair the disruptive effects of mutation in later generations. Compared to mutation-based evolutionary algorithms, this makes multibit mutations more useful. Introducing crossover changes the optimal mutation rate on OneMax from [Formula: see text] to [Formula: see text]. This holds both for uniform crossover and k-point crossover. Experiments and statistical tests confirm that our findings apply to a broad class of building block functions.

Percussive Augmenter of Rotary Drills (PARoD)

NASA Technical Reports Server (NTRS)

Badescu, Mircea; Hasenoehrl, Jennifer; Bar-Cohen, Yoseph; Sherrit, Stewart; Bao, Xiaoqi; Chang, Zensheu; Ostlund, Patrick; Aldrich, Jack

2013-01-01

Increasingly, NASA exploration mission objectives include sample acquisition tasks for in-situ analysis or for potential sample return to Earth. To address the requirements for samplers that could be operated at the conditions of the various bodies in the solar system, a piezoelectric actuated percussive sampling device was developed that requires low preload (as low as 10 N) which is important for operation at low gravity. This device can be made as light as 400 g, can be operated using low average power, and can drill rocks as hard as basalt. Significant improvement of the penetration rate was achieved by augmenting the hammering action by rotation and use of a fluted bit to provide effective cuttings removal. Generally, hammering is effective in fracturing drilled media while rotation of fluted bits is effective in cuttings removal. To benefit from these two actions, a novel configuration of a percussive mechanism was developed to produce an augmenter of rotary drills. The device was called Percussive Augmenter of Rotary Drills (PARoD). A breadboard PARoD was developed with a 6.4 mm (0.25 in) diameter bit and was demonstrated to increase the drilling rate of rotation alone by 1.5 to over 10 times. The test results of this configuration were published in a previous publication. Further, a larger PARoD breadboard with a 50.8 mm (2.0 in) diameter bit was developed and tested. This paper presents the design, analysis and test results of the large diameter bit percussive augmenter.

Robust 1-Bit Compressive Sensing via Binary Stable Embeddings of Sparse Vectors

DTIC Science & Technology

2011-04-15

funded by Mitsubishi Electric Research Laboratories. †ICTEAM Institute, ELEN Department, Université catholique de Louvain (UCL), B-1348 Louvain-la-Neuve...reduced to a simple comparator that tests for values above or below zero, enabling extremely simple, efficient, and fast quantization. A 1-bit quantizer is...these two terms appears to be significantly different, according to the previously discussed experiments. To test the hypothesis that this term is the key

The Effects of Bit Wear on Respirable Silica Dust, Noise and Productivity: A Hammer Drill Bench Study.

PubMed

Carty, Paul; Cooper, Michael R; Barr, Alan; Neitzel, Richard L; Balmes, John; Rempel, David

2017-07-01

Hammer drills are used extensively in commercial construction for drilling into concrete for tasks including rebar installation for structural upgrades and anchor bolt installation. This drilling task can expose workers to respirable silica dust and noise. The aim of this pilot study was to evaluate the effects of bit wear on respirable silica dust, noise, and drilling productivity. Test bits were worn to three states by drilling consecutive holes to different cumulative drilling depths: 0, 780, and 1560 cm. Each state of bit wear was evaluated by three trials (nine trials total). For each trial, an automated laboratory test bench system drilled 41 holes 1.3 cm diameter, and 10 cm deep into concrete block at a rate of one hole per minute using a commercially available hammer drill and masonry bits. During each trial, dust was continuously captured by two respirable and one inhalable sampling trains and noise was sampled with a noise dosimeter. The room was thoroughly cleaned between trials. When comparing results for the sharp (0 cm) versus dull bit (1560 cm), the mean respirable silica increased from 0.41 to 0.74 mg m-3 in sampler 1 (P = 0.012) and from 0.41 to 0.89 mg m-3 in sampler 2 (P = 0.024); levels above the NIOSH recommended exposure limit of 0.05 mg m-3. Likewise, mean noise levels increased from 112.8 to 114.4 dBA (P < 0.00001). Drilling productivity declined with increasing wear from 10.16 to 7.76 mm s-1 (P < 0.00001). Increasing bit wear was associated with increasing respirable silica dust and noise and reduced drilling productivity. The levels of dust and noise produced by these experimental conditions would require dust capture, hearing protection, and possibly respiratory protection. The findings support the adoption of a bit replacement program by construction contractors. © The Author 2017. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Conceptual design of a 10 to the 8th power bit magnetic bubble domain mass storage unit and fabrication, test and delivery of a feasibility model

NASA Technical Reports Server (NTRS)

1972-01-01

The conceptual design of a highly reliable 10 to the 8th power-bit bubble domain memory for the space program is described. The memory has random access to blocks of closed-loop shift registers, and utilizes self-contained bubble domain chips with on-chip decoding. Trade-off studies show that the highest reliability and lowest power dissipation is obtained when the memory is organized on a bit-per-chip basis. The final design has 800 bits/register, 128 registers/chip, 16 chips/plane, and 112 planes, of which only seven are activated at a time. A word has 64 data bits +32 checkbits, used in a 16-adjacent code to provide correction of any combination of errors in one plane. 100 KHz maximum rotational frequency keeps power low (equal to or less than, 25 watts) and also allows asynchronous operation. Data rate is 6.4 megabits/sec, access time is 200 msec to an 800-word block and an additional 4 msec (average) to a word. The fabrication and operation are also described for a 64-bit bubble domain memory chip designed to test the concept of on-chip magnetic decoding. Access to one of the chip's four shift registers for the read, write, and clear functions is by means of bubble domain decoders utilizing the interaction between a conductor line and a bubble.

Test anxiety and self-esteem in senior high school students: a cross-sectional study.

PubMed

Sarı, Seda Aybüke; Bilek, Günal; Çelik, Ekrem

2018-02-01

In this study, it is aimed to determine the level of test anxiety and self-esteem in the high school students preparing for the university exam in Bitlis, Turkey, and to investigate the effect of test anxiety on self-esteem. Seven-hundred and twenty-four high school students who were preparing for the university entrance examination in Bitlis participated in the study. A questionnaire which includes socio-demographic data form, Rosenberg Self-Esteem Scale and Revised Test Anxiety Scale was prepared as an e-questionnaire for the students to fill easily and uploaded to the Bitlis State Hospital's website. Schools were called and informed for the students to fill out the e-questionnaire on the Internet. The most important findings from our study are that gender is influential on test anxiety and self-esteem score and test anxiety level are negatively correlated. It was observed that female students had more test anxiety than male students and those who had higher self-esteem had less test anxiety. Consequently, our study shows that university entrance examination creates anxiety on students and reduces self-esteem, especially in female students.

Microcontroller for automation application

NASA Technical Reports Server (NTRS)

Cooper, H. W.

1975-01-01

The description of a microcontroller currently being developed for automation application was given. It is basically an 8-bit microcomputer with a 40K byte random access memory/read only memory, and can control a maximum of 12 devices through standard 15-line interface ports.

NSC 800, 8-bit CMOS microprocessor

NASA Technical Reports Server (NTRS)

Suszko, S. F.

1984-01-01

The NSC 800 is an 8-bit CMOS microprocessor manufactured by National Semiconductor Corp., Santa Clara, California. The 8-bit microprocessor chip with 40-pad pin-terminals has eight address buffers (A8-A15), eight data address -- I/O buffers (AD(sub 0)-AD(sub 7)), six interrupt controls and sixteen timing controls with a chip clock generator and an 8-bit dynamic RAM refresh circuit. The 22 internal registers have the capability of addressing 64K bytes of memory and 256 I/O devices. The chip is fabricated on N-type (100) silicon using self-aligned polysilicon gates and local oxidation process technology. The chip interconnect consists of four levels: Aluminum, Polysi 2, Polysi 1, and P(+) and N(+) diffusions. The four levels, except for contact interface, are isolated by interlevel oxide. The chip is packaged in a 40-pin dual-in-line (DIP), side brazed, hermetically sealed, ceramic package with a metal lid. The operating voltage for the device is 5 V. It is available in three operating temperature ranges: 0 to +70 C, -40 to +85 C, and -55 to +125 C. Two devices were submitted for product evaluation by F. Stott, MTS, JPL Microprocessor Specialist. The devices were pencil-marked and photographed for identification.

Structural analysis of peptides that fill sites near the active center of the two different enzyme molecules by artificial intelligence and computer simulations

NASA Astrophysics Data System (ADS)

Nishiyama, Katsuhiko

2018-05-01

Using artificial intelligence, the binding styles of 167 tetrapeptides were predicted in the active site of papain and cathepsin K. Five tetrapeptides (Asn-Leu-Lys-Trp, Asp-Gln-Trp-Gly, Cys-Gln-Leu-Arg, Gln-Leu-Trp-Thr and Arg-Ser-Glu-Arg) were found to bind sites near the active center of both papain and cathepsin K. These five tetrapeptides have the potential to also bind sites of other cysteine proteases, and structural characteristics of these tetrapeptides should aid the design of a common inhibitor of cysteine proteases. Smart application of artificial intelligence should accelerate data mining of important complex systems.

Who smokes in Hollywood? Characteristics of smokers in popular films from 1940 to 1989.

PubMed

McIntosh, W D; Bazzini, D G; Smith, S M; Wayne, S M

1998-01-01

We examined how smokers were depicted in 100 popular films spanning 5 decades. Smokers were depicted as more romantically and sexually active than nonsmokers and as marginally more intelligent than nonsmokers. Smokers and nonsmokers did not differ in terms of attractiveness, goodness, socioeconomic status, aggression, friendliness, or outcome at film's end. Thus, if anything, smokers are depicted a bit more positively than nonsmokers. We compared Hollywood's depiction of smokers to real-world demographics on smoking and found that Hollywood's depiction of smoking tends to ignore the negative consequences and correlates (e.g., ill health, low socioeconomic status, aggressive behavior) of smoking.

Bit Grooming: Statistically accurate precision-preserving quantization with compression, evaluated in the netCDF operators (NCO, v4.4.8+)

DOE PAGES

Zender, Charles S.

2016-09-19

Geoscientific models and measurements generate false precision (scientifically meaningless data bits) that wastes storage space. False precision can mislead (by implying noise is signal) and be scientifically pointless, especially for measurements. By contrast, lossy compression can be both economical (save space) and heuristic (clarify data limitations) without compromising the scientific integrity of data. Data quantization can thus be appropriate regardless of whether space limitations are a concern. We introduce, implement, and characterize a new lossy compression scheme suitable for IEEE floating-point data. Our new Bit Grooming algorithm alternately shaves (to zero) and sets (to one) the least significant bits ofmore » consecutive values to preserve a desired precision. This is a symmetric, two-sided variant of an algorithm sometimes called Bit Shaving that quantizes values solely by zeroing bits. Our variation eliminates the artificial low bias produced by always zeroing bits, and makes Bit Grooming more suitable for arrays and multi-dimensional fields whose mean statistics are important. Bit Grooming relies on standard lossless compression to achieve the actual reduction in storage space, so we tested Bit Grooming by applying the DEFLATE compression algorithm to bit-groomed and full-precision climate data stored in netCDF3, netCDF4, HDF4, and HDF5 formats. Bit Grooming reduces the storage space required by initially uncompressed and compressed climate data by 25–80 and 5–65 %, respectively, for single-precision values (the most common case for climate data) quantized to retain 1–5 decimal digits of precision. The potential reduction is greater for double-precision datasets. When used aggressively (i.e., preserving only 1–2 digits), Bit Grooming produces storage reductions comparable to other quantization techniques such as Linear Packing. Unlike Linear Packing, whose guaranteed precision rapidly degrades within the relatively narrow dynamic range of values that it can compress, Bit Grooming guarantees the specified precision throughout the full floating-point range. Data quantization by Bit Grooming is irreversible (i.e., lossy) yet transparent, meaning that no extra processing is required by data users/readers. Hence Bit Grooming can easily reduce data storage volume without sacrificing scientific precision or imposing extra burdens on users.« less

Intelligence Decision Support System for the Republic of Korea Army Engineer Operation.

DTIC Science & Technology

1987-06-01

34.:L;’:Ce mnechanism and prUnin2 -must be collected in a computer program for it to -’’, nroerlx escribed as possessing Artificial Intelligence (AI). [Ref...At84 128 INTELLIGENCE DECISION SUPPORT SYSTEM FOR THE REPUBLIC I/i OF KOREA ARMY ENGINEER OPERATION(U) NAVAL POSTGRADUATE SCHOOL MONTEREY CA C K...POSTGRADUATE SCHOOL q~J.00 ’Monterey, California THESIS INTELLIGENCE DECISION SUPPORT SYSTEM FOR THE REPUBLIC OF KOREA ARMY ENGINEER OPERATION by Jang

Intelligent detection and identification in fiber-optical perimeter intrusion monitoring system based on the FBG sensor network

NASA Astrophysics Data System (ADS)

Wu, Huijuan; Qian, Ya; Zhang, Wei; Li, Hanyu; Xie, Xin

2015-12-01

A real-time intelligent fiber-optic perimeter intrusion detection system (PIDS) based on the fiber Bragg grating (FBG) sensor network is presented in this paper. To distinguish the effects of different intrusion events, a novel real-time behavior impact classification method is proposed based on the essential statistical characteristics of signal's profile in the time domain. The features are extracted by the principal component analysis (PCA), which are then used to identify the event with a K-nearest neighbor classifier. Simulation and field tests are both carried out to validate its effectiveness. The average identification rate (IR) for five sample signals in the simulation test is as high as 96.67%, and the recognition rate for eight typical signals in the field test can also be achieved up to 96.52%, which includes both the fence-mounted and the ground-buried sensing signals. Besides, critically high detection rate (DR) and low false alarm rate (FAR) can be simultaneously obtained based on the autocorrelation characteristics analysis and a hierarchical detection and identification flow.

Experience with custom processors in space flight applications

NASA Technical Reports Server (NTRS)

Fraeman, M. E.; Hayes, J. R.; Lohr, D. A.; Ballard, B. W.; Williams, R. L.; Henshaw, R. M.

1991-01-01

The Applied Physics Laboratory (APL) has developed a magnetometer instrument for a swedish satellite named Freja with launch scheduled for August 1992 on a Chinese Long March rocket. The magnetometer controller utilized a custom microprocessor designed at APL with the Genesil silicon compiler. The processor evolved from our experience with an older bit-slice design and two prior single chip efforts. The architecture of our microprocessor greatly lowered software development costs because it was optimized to provide an interactive and extensible programming environment hosted by the target hardware. Radiation tolerance of the microprocessor was also tested and was adequate for Freja's mission -- 20 kRad(Si) total dose and very infrequent latch-up and single event upset events.

A "Nonbiased Assessment" of Intelligence Testing.

ERIC Educational Resources Information Center

Vandivier, Phillip L.; Vandivier, Stella Sue

1979-01-01

Arguments and prejudices against the use of individually administered intelligence tests are considered and compared with possible values that may be obtained. Cautions about test score interpretation are discussed. Implications of abolishing intelligence testing are considered and recommendations for effective testing policies are presented. (CTM)

NASA Stennis Space Center Integrated System Health Management Test Bed and Development Capabilities

NASA Technical Reports Server (NTRS)

Figueroa, Fernando; Holland, Randy; Coote, David

2006-01-01

Integrated System Health Management (ISHM) is a capability that focuses on determining the condition (health) of every element in a complex System (detect anomalies, diagnose causes, prognosis of future anomalies), and provide data, information, and knowledge (DIaK)-not just data-to control systems for safe and effective operation. This capability is currently done by large teams of people, primarily from ground, but needs to be embedded on-board systems to a higher degree to enable NASA's new Exploration Mission (long term travel and stay in space), while increasing safety and decreasing life cycle costs of spacecraft (vehicles; platforms; bases or outposts; and ground test, launch, and processing operations). The topics related to this capability include: 1) ISHM Related News Articles; 2) ISHM Vision For Exploration; 3) Layers Representing How ISHM is Currently Performed; 4) ISHM Testbeds & Prototypes at NASA SSC; 5) ISHM Functional Capability Level (FCL); 6) ISHM Functional Capability Level (FCL) and Technology Readiness Level (TRL); 7) Core Elements: Capabilities Needed; 8) Core Elements; 9) Open Systems Architecture for Condition-Based Maintenance (OSA-CBM); 10) Core Elements: Architecture, taxonomy, and ontology (ATO) for DIaK management; 11) Core Elements: ATO for DIaK Management; 12) ISHM Architecture Physical Implementation; 13) Core Elements: Standards; 14) Systematic Implementation; 15) Sketch of Work Phasing; 16) Interrelationship Between Traditional Avionics Systems, Time Critical ISHM and Advanced ISHM; 17) Testbeds and On-Board ISHM; 18) Testbed Requirements: RETS AND ISS; 19) Sustainable Development and Validation Process; 20) Development of on-board ISHM; 21) Taxonomy/Ontology of Object Oriented Implementation; 22) ISHM Capability on the E1 Test Stand Hydraulic System; 23) Define Relationships to Embed Intelligence; 24) Intelligent Elements Physical and Virtual; 25) ISHM Testbeds and Prototypes at SSC Current Implementations; 26) Trailer-Mounted RETS; 27) Modeling and Simulation; 28) Summary ISHM Testbed Environments; 29) Data Mining - ARC; 30) Transitioning ISHM to Support NASA Missions; 31) Feature Detection Routines; 32) Sample Features Detected in SSC Test Stand Data; and 33) Health Assessment Database (DIaK Repository).

A Modified Differential Coherent Bit Synchronization Algorithm for BeiDou Weak Signals with Large Frequency Deviation.

PubMed

Han, Zhifeng; Liu, Jianye; Li, Rongbing; Zeng, Qinghua; Wang, Yi

2017-07-04

BeiDou system navigation messages are modulated with a secondary NH (Neumann-Hoffman) code of 1 kbps, where frequent bit transitions limit the coherent integration time to 1 millisecond. Therefore, a bit synchronization algorithm is necessary to obtain bit edges and NH code phases. In order to realize bit synchronization for BeiDou weak signals with large frequency deviation, a bit synchronization algorithm based on differential coherent and maximum likelihood is proposed. Firstly, a differential coherent approach is used to remove the effect of frequency deviation, and the differential delay time is set to be a multiple of bit cycle to remove the influence of NH code. Secondly, the maximum likelihood function detection is used to improve the detection probability of weak signals. Finally, Monte Carlo simulations are conducted to analyze the detection performance of the proposed algorithm compared with a traditional algorithm under the CN0s of 20~40 dB-Hz and different frequency deviations. The results show that the proposed algorithm outperforms the traditional method with a frequency deviation of 50 Hz. This algorithm can remove the effect of BeiDou NH code effectively and weaken the influence of frequency deviation. To confirm the feasibility of the proposed algorithm, real data tests are conducted. The proposed algorithm is suitable for BeiDou weak signal bit synchronization with large frequency deviation.

Test Review: Review of Kaufman Brief Intelligence Test, Second Edition: Kaufman, A. S., & Kaufman, N. L. (2004). "Kaufman Brief Intelligence Test, Second Edition". Bloomington, MN: Pearson, Inc.

ERIC Educational Resources Information Center

Bain, Sherry K.; Jaspers, Kathryn E.

2010-01-01

This article presents a review of the Kaufman Brief Intelligence Test, Second Edition (KBIT-2; Kaufman & Kaufman, 2004b), which is designed to provide a brief, individualized format for measuring verbal and nonverbal intelligence in children and adults from the ages of 4 years, 0 months through 90 years, 11 months. The test consists of only…

The Relationship Between Hemoglobin Level and Intellectual Function.

ERIC Educational Resources Information Center

Munro, Nancy

In a study to learn whether or not poor nutrition, as indicated by low hemoglobin levels, affects intelligence and behavior, 113 Head Start children in Missoula, Montana took part. Group testing with the Lorge Thorndike Intelligence Test and individual testing with the Wechsler and Primary Scale of Intelligence or Wechsler Intelligence Scale for…

Assessing Intelligence in Children and Youth Living in the Netherlands

ERIC Educational Resources Information Center

Hurks, Petra P. M.; Bakker, Helen

2016-01-01

In this article, we briefly describe the history of intelligence test use with children and youth in the Netherlands, explain which models of intelligence guide decisions about test use, and detail how intelligence tests are currently being used in Dutch school settings. Empirically supported and theoretical models studying the structure of human…

Shake, Rattle and Roles: Lessons from Experimental Earthquake Engineering for Incorporating Remote Users in Large-Scale E-Science Experiments

DTIC Science & Technology

2007-01-01

Mechanical Turk: Artificial Artificial Intelligence . Retrieved May 15, 2006 from http://www.mturk.com/ mturk/welcome Atkins, D. E., Droegemeier, K. K...Turk (Amazon, 2006) site goes beyond volunteers and pays people to do Human Intelligence Tasks, those that are difficult for computers but relatively...geographically distributed scientific collaboration, and the use of videogame technology for training. Address: U.S. Army Research Institute, 2511 Jefferson

Exploring the Variable Sky with Linear. 1. Photometric Recalibration with the Sloan Digital Sky Survey

DTIC Science & Technology

2011-12-01

encoded as a 64-bit integer number theta_2massd Distance in arcsec from the 2MASS source J 2MASS J-band magnitude JErr 2MASS J-band magnitude error H... 2MASS H-band magnitude HErr 2MASS H-band magnitude error K 2MASS K-band magnitude KErr 2MASS K-band magnitude error jh 2MASS J−H color (corrected for...extinction, j − h = (J − 0.327rExt) − (H − 0.209rExt)) hk 2MASS H−K color (corrected for extinction, h− k = (H − 0.209rExt) − (K − 0.133rExt)) jk

Verification testing of the compression performance of the HEVC screen content coding extensions

NASA Astrophysics Data System (ADS)

Sullivan, Gary J.; Baroncini, Vittorio A.; Yu, Haoping; Joshi, Rajan L.; Liu, Shan; Xiu, Xiaoyu; Xu, Jizheng

2017-09-01

This paper reports on verification testing of the coding performance of the screen content coding (SCC) extensions of the High Efficiency Video Coding (HEVC) standard (Rec. ITU-T H.265 | ISO/IEC 23008-2 MPEG-H Part 2). The coding performance of HEVC screen content model (SCM) reference software is compared with that of the HEVC test model (HM) without the SCC extensions, as well as with the Advanced Video Coding (AVC) joint model (JM) reference software, for both lossy and mathematically lossless compression using All-Intra (AI), Random Access (RA), and Lowdelay B (LB) encoding structures and using similar encoding techniques. Video test sequences in 1920×1080 RGB 4:4:4, YCbCr 4:4:4, and YCbCr 4:2:0 colour sampling formats with 8 bits per sample are tested in two categories: "text and graphics with motion" (TGM) and "mixed" content. For lossless coding, the encodings are evaluated in terms of relative bit-rate savings. For lossy compression, subjective testing was conducted at 4 quality levels for each coding case, and the test results are presented through mean opinion score (MOS) curves. The relative coding performance is also evaluated in terms of Bjøntegaard-delta (BD) bit-rate savings for equal PSNR quality. The perceptual tests and objective metric measurements show a very substantial benefit in coding efficiency for the SCC extensions, and provided consistent results with a high degree of confidence. For TGM video, the estimated bit-rate savings ranged from 60-90% relative to the JM and 40-80% relative to the HM, depending on the AI/RA/LB configuration category and colour sampling format.

Improving TCP Network Performance by Detecting and Reacting to Packet Reordering

NASA Technical Reports Server (NTRS)

Kruse, Hans; Ostermann, Shawn; Allman, Mark

2003-01-01

There are many factors governing the performance of TCP-basec applications traversing satellite channels. The end-to-end performance of TCP is known to be degraded by the reordering, delay, noise and asymmetry inherent in geosynchronous systems. This result has been largely based on experiments that evaluate the performance of TCP in single flow tests. While single flow tests are useful for deriving information on the theoretical behavior of TCP and allow for easy diagnosis of problems they do not represent a broad range of realistic situations and therefore cannot be used to authoritatively comment on performance issues. The experiments discussed in this report test TCP s performance in a more dynamic environment with competing traffic flows from hundreds of TCP connections running simultaneously across the satellite channel. Another aspect we investigate is TCP's reaction to bit errors on satellite channels. TCP interprets loss as a sign of network congestion. This causes TCP to reduce its transmission rate leading to reduced performance when loss is due to corruption. We allowed the bit error rate on our satellite channel to vary widely and tested the performance of TCP as a function of these bit error rates. Our results show that the average performance of TCP on satellite channels is good even under conditions of loss as high as bit error rates of 10(exp -5)

Artificial Intelligence Study (AIS).

DTIC Science & Technology

1987-02-01

ARTIFICIAL INTELLIGNECE HARDWARE ....... 2-50 AI Architecture ................................... 2-49 AI Hardware ....................................... 2...ftf1 829 ARTIFICIAL INTELLIGENCE STUDY (RIS)(U) MAY CONCEPTS 1/3 A~NLYSIS AGENCY BETHESA RD R B NOJESKI FED 6? CM-RP-97-1 NCASIFIED /01/6 M |K 1.0...p/ - - ., e -- CAA- RP- 87-1 SAOFŔ)11 I ARTIFICIAL INTELLIGENCE STUDY (AIS) tNo DTICFEBRUARY 1987 LECT 00 I PREPARED BY RESEARCH AND ANALYSIS

Communication and Attitude Revision

DTIC Science & Technology

1992-01-01

Conference on Aritificial Intelligence , (1989) 1074- 1079 3. Clark, H., Marshal, C.: Definite reference and mutual knowledge. In Joshi, A., Sag, I.. and...21st Annual Meeting of the ACL (1983) 57-63 9. Konolige, K.: On the relation between default and autoepistemic logic. Artificial Intelligence 35(3...reasoning. Artificial Intelligence 13 (1980) 81-132 16. Richmond Thomason. Accommodation, meaning, and implicature. In Cohen, P., Morgan, J., and

HIGH-POWER TURBODRILL AND DRILL BIT FOR DRILLING WITH COILED TUBING

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robert Radtke; David Glowka; Man Mohan Rai

2008-03-31

Commercial introduction of Microhole Technology to the gas and oil drilling industry requires an effective downhole drive mechanism which operates efficiently at relatively high RPM and low bit weight for delivering efficient power to the special high RPM drill bit for ensuring both high penetration rate and long bit life. This project entails developing and testing a more efficient 2-7/8 in. diameter Turbodrill and a novel 4-1/8 in. diameter drill bit for drilling with coiled tubing. The high-power Turbodrill were developed to deliver efficient power, and the more durable drill bit employed high-temperature cutters that can more effectively drill hardmore » and abrasive rock. This project teams Schlumberger Smith Neyrfor and Smith Bits, and NASA AMES Research Center with Technology International, Inc (TII), to deliver a downhole, hydraulically-driven power unit, matched with a custom drill bit designed to drill 4-1/8 in. boreholes with a purpose-built coiled tubing rig. The U.S. Department of Energy National Energy Technology Laboratory has funded Technology International Inc. Houston, Texas to develop a higher power Turbodrill and drill bit for use in drilling with a coiled tubing unit. This project entails developing and testing an effective downhole drive mechanism and a novel drill bit for drilling 'microholes' with coiled tubing. The new higher power Turbodrill is shorter, delivers power more efficiently, operates at relatively high revolutions per minute, and requires low weight on bit. The more durable thermally stable diamond drill bit employs high-temperature TSP (thermally stable) diamond cutters that can more effectively drill hard and abrasive rock. Expectations are that widespread adoption of microhole technology could spawn a wave of 'infill development' drilling of wells spaced between existing wells, which could tap potentially billions of barrels of bypassed oil at shallow depths in mature producing areas. At the same time, microhole coiled tube drilling offers the opportunity to dramatically cut producers' exploration risk to a level comparable to that of drilling development wells. Together, such efforts hold great promise for economically recovering a sizeable portion of the estimated remaining shallow (less than 5,000 feet subsurface) oil resource in the United States. The DOE estimates this U.S. targeted shallow resource at 218 billion barrels. Furthermore, the smaller 'footprint' of the lightweight rigs utilized for microhole drilling and the accompanying reduced drilling waste disposal volumes offer the bonus of added environmental benefits. DOE analysis shows that microhole technology has the potential to cut exploratory drilling costs by at least a third and to slash development drilling costs in half.« less

[Do Current German-Language Intelligence Tests Take into Consideration the Special Needs of Children with Disabilities?].

PubMed

Mickley, Manfred; Renner, Gerolf

2015-01-01

Do Current German-Language Intelligence Tests Take into Consideration the Special Needs of Children with Disabilities? A review of 23 German intelligence test manuals shows that test-authors do not exclude the use of their tests for children with disabilities. However, these special groups play a minor role in the construction, standardization, and validation of intelligence tests. There is no sufficient discussion and reflection concerning the issue which construct-irrelevant requirements may reduce the validity of the test or which individual test-adaptations are allowed or recommended. Intelligence testing of children with disabilities needs more empirical evidence on objectivity, reliability, and validity of the assessment-procedures employed. Future test construction and validation should systematically analyze construct-irrelevant variance in item format, the special needs of handicapped children, and should give hints for useful test-adaptations.

Evaluating the relation between memory and intelligence in children with learning disabilities.

PubMed

Hoerig, Dianne C; David, Andrew S; D'Amato, Rik Carl

2002-12-01

Although both intelligence tests and memory tests are commonly used in neuropsychological examinations, the relationship between memory and intelligence has not been fully explored, particularly for children having learning disabilities. Memory, or the ability to retain information, was evaluated using the Test of Memory and Learning, a recently released test that gives a comprehensive measure of global memory functioning. This, and the Wechsler Intelligence Scale for Children-Third Edition, used to assess intelligence, were given to 80 students with learning disabilities. The correlation between a global measure of memory and a global measure f intelligence was significant (r = .59), indicating that memory should be viewed as an important component when evaluating children with learning disabilities.

Intelligent Systems Approach for Automated Identification of Individual Control Behavior of a Human Operator

NASA Technical Reports Server (NTRS)

Zaychik, Kirill B.; Cardullo, Frank M.

2012-01-01

Results have been obtained using conventional techniques to model the generic human operator?s control behavior, however little research has been done to identify an individual based on control behavior. The hypothesis investigated is that different operators exhibit different control behavior when performing a given control task. Two enhancements to existing human operator models, which allow personalization of the modeled control behavior, are presented. One enhancement accounts for the testing control signals, which are introduced by an operator for more accurate control of the system and/or to adjust the control strategy. This uses the Artificial Neural Network which can be fine-tuned to model the testing control. Another enhancement takes the form of an equiripple filter which conditions the control system power spectrum. A novel automated parameter identification technique was developed to facilitate the identification process of the parameters of the selected models. This utilizes a Genetic Algorithm based optimization engine called the Bit-Climbing Algorithm. Enhancements were validated using experimental data obtained from three different sources: the Manual Control Laboratory software experiments, Unmanned Aerial Vehicle simulation, and NASA Langley Research Center Visual Motion Simulator studies. This manuscript also addresses applying human operator models to evaluate the effectiveness of motion feedback when simulating actual pilot control behavior in a flight simulator.

Design of a massively parallel computer using bit serial processing elements

NASA Technical Reports Server (NTRS)

Aburdene, Maurice F.; Khouri, Kamal S.; Piatt, Jason E.; Zheng, Jianqing

1995-01-01

A 1-bit serial processor designed for a parallel computer architecture is described. This processor is used to develop a massively parallel computational engine, with a single instruction-multiple data (SIMD) architecture. The computer is simulated and tested to verify its operation and to measure its performance for further development.

Communication channels secured from eavesdropping via transmission of photonic Bell states

NASA Astrophysics Data System (ADS)

Shimizu, Kaoru; Imoto, Nobuyuki

1999-07-01

This paper proposes a quantum communication scheme for sending a definite binary sequence while confirming the security of the transmission. The scheme is very suitable for sending a ciphertext in a secret-key cryptosystem so that we can detect any eavesdropper who attempts to decipher the key. Thus we can continue to use a secret key unless we detect eavesdropping and the security of a key that is used repeatedly can be enhanced to the level of one-time-pad cryptography. In our scheme, a pair of entangled photon twins is employed as a bit carrier which is encoded in a two-term superposition of four Bell states. Different bases are employed for encoding the binary sequence of a ciphertext and a random test bit. The photon twins are measured with a Bell state analyzer and any bit can be decoded from the resultant Bell state when the receiver is later notified of the coding basis through a classical channel. By opening the positions and the values of test bits, ciphertext can be read and eavesdropping is simultaneously detected.

Construct Validity of the Wechsler Abbreviated Scale of Intelligence and Wide Range Intelligence Test: Convergent and Structural Validity

ERIC Educational Resources Information Center

Canivez, Gary L.; Konold, Timothy R.; Collins, Jason M.; Wilson, Greg

2009-01-01

The Wechsler Abbreviated Scale of Intelligence (WASI; Psychological Corporation, 1999) and the Wide Range Intelligence Test (WRIT; Glutting, Adams, & Sheslow, 2000) are two well-normed brief measures of general intelligence with subtests purportedly assessing verbal-crystallized abilities and nonverbal-fluid-visual abilities. With a sample of…

On the Relevance of Intelligence: Applications for Classrooms? Intelligence Testing: The Good, the Bad and the Ugly.

ERIC Educational Resources Information Center

Law, Nancy

The relevance of intelligence testing for schools within one district, the Sacramento (California) school district and the state of California is explored, and applications of intelligence theory in district schools and classrooms are discussed. Intelligence, for purposes of this discussion, is the aggregate capacity of each student's…

The Cylindrical Structure of the Wechsler Intelligence Scale for Children--IV: A Retest of the Guttman Model of Intelligence

ERIC Educational Resources Information Center

Cohen, Arie; Fiorello, Catherine A.; Farley, Frank H.

2006-01-01

A previous study on the underlying structure of the Wechsler intelligence test (WISC-R; [Wechsler, D. (1974). Manual WISC-R: Wechsler intelligence scale for children-Revised. New York: Psychological Corporation]), using smallest space analysis (SSA) [Guttman, L., and Levy, S. (1991). Two structural laws for intelligence tests.…

Bit-error-rate testing of fiber optic data links for MMIC-based phased array antennas

NASA Technical Reports Server (NTRS)

Shalkhauser, K. A.; Kunath, R. R.; Daryoush, A. S.

1990-01-01

The measured bit-error-rate (BER) performance of a fiber optic data link to be used in satellite communications systems is presented and discussed. In the testing, the link was measured for its ability to carry high burst rate, serial-minimum shift keyed (SMSK) digital data similar to those used in actual space communications systems. The fiber optic data link, as part of a dual-segment injection-locked RF fiber optic link system, offers a means to distribute these signals to the many radiating elements of a phased array antenna. Test procedures, experimental arrangements, and test results are presented.

Experimental and numerical study of drill bit drop tests on Kuru granite

NASA Astrophysics Data System (ADS)

Fourmeau, Marion; Kane, Alexandre; Hokka, Mikko

2017-01-01

This paper presents an experimental and numerical study of Kuru grey granite impacted with a seven-buttons drill bit mounted on an instrumented drop test machine. The force versus displacement curves during the impact, so-called bit-rock interaction (BRI) curves, were obtained using strain gauge measurements for two levels of impact energy. Moreover, the volume of removed rock after each drop test was evaluated by stereo-lithography (three-dimensional surface reconstruction). A modified version of the Holmquist-Johnson-Cook (MHJC) material model was calibrated using Kuru granite test results available from the literature. Numerical simulations of the single drop tests were carried out using the MHJC model available in the LS-DYNA explicit finite-element solver. The influence of the impact energy and additional confining pressure on the BRI curves and the volume of the removed rock is discussed. In addition, the influence of the rock surface shape before impact was evaluated using two different mesh geometries: a flat surface and a hyperbolic surface. The experimental and numerical results are compared and discussed in terms of drilling efficiency through the mechanical specific energy. This article is part of the themed issue 'Experimental testing and modelling of brittle materials at high strain rates'.

Flexible Rover Architecture for Science Instrument Integration and Testing

NASA Technical Reports Server (NTRS)

Bualat, Maria G.; Kobayashi, Linda; Lee, Susan Y.; Park, Eric

2006-01-01

At NASA Ames Research Center, the Intelligent Robotics Group (IRG) fields the K9 and K10 class rovers. Both use a mobile robot hardware architecture designed for extensibility and reconfigurability that allows for rapid changes in instrumentation and provides a high degree of modularity. Over the past ssveral years, we have worked with instrument developers at NASA centers, universities, and national laboratories to integrate or partially integrate their instruments onboard the K9 and K10 rovers. Early efforts required considerable interaction to work through integration issues such as power, data protocol and mechanical mounting. These interactions informed the design of our current avionics architecture, and have simplified more recent integration projects. In this paper, we will describe the IRG extensible avionics and software architecture and the effect it has had on our recent instrument integration efforts, including integration of four Mars Instrument Development Program devices.

Characterizing Spatial Ability: Different Mental Processes Reflected in Accuracy and Latency Scores.

DTIC Science & Technology

1978-08-01

Prince- ton, New Jersey: Educational Testing Service, March, 1969. 6. Guilford, J. P., The Nature of Human Intelligence . New York: McGraw- Hill, 1969. 7...of visual- figural systems (CFS-V) , cognition of figural transformations (CFT), and cogni- tion of kinesthetic -figural systems (CFS-K) , represents...position and direction that has occurred from the top to the bottom drawing of a motorboat heading toward a coastline. The time limit on the 60-item GZO is

Integrated Cognitive-neuroscience Architectures for Understanding Sensemaking (ICArUS): Phase 2 Challenge Problem Design and Test Specification

DTIC Science & Technology

2014-11-01

intelligence. No. Title of Case Study P U Pc Pt Ft Pa 1 Clinical vs. Actuarial Geospatial Profiling Strategies X X 2 Route Security in Baghdad X...support. Information Sciences , 176, 1570-1589. Burns, K. (2005). Mental models and normal errors. In Montgomery, H., Lipshitz, & Brehmer, B. (eds...utilities. Information Sciences , 179, 1599-1607. Davis, M. (1997). Game Theory: A Nontechnical Introduction. New York: Dover. Edwards, W. (1982

Mechanical properties of dissimilar metal joints composed of DP 980 steel and AA 7075-T6

DOE PAGES

Squires, Lile; Lim, Yong Chae; Miles, Michael; ...

2015-03-18

In this study, a solid state joining process, called friction bit joining, was used to spot weld aluminium alloy 7075-T6 to dual phase 980 steel. Lap shear failure loads for specimens without adhesive averaged ~10kN, while cross-tension specimens averaged 2·8 kN. Addition of adhesive with a thickness up to 500 μm provided a gain of ~50% to lap shear failure loads, while a much thinner layer of adhesive increased cross-tension failure loads by 20%. Microstructures of the welds were martensitic, but the hardness of the joining bit portion was greater than that of the DP 980, owing to its highermore » alloy content. Softening in the heat affected zone of a welded joint appeared to be relatively small, though it was enough to cause nugget pullout failures in some lap shear tension specimens. Finally, other failures in lap shear tension were interfacial, while all of the failures in cross-tension were interfacial.« less

Convolutional encoding of self-dual codes

NASA Technical Reports Server (NTRS)

Solomon, G.

1994-01-01

There exist almost complete convolutional encodings of self-dual codes, i.e., block codes of rate 1/2 with weights w, w = 0 mod 4. The codes are of length 8m with the convolutional portion of length 8m-2 and the nonsystematic information of length 4m-1. The last two bits are parity checks on the two (4m-1) length parity sequences. The final information bit complements one of the extended parity sequences of length 4m. Solomon and van Tilborg have developed algorithms to generate these for the Quadratic Residue (QR) Codes of lengths 48 and beyond. For these codes and reasonable constraint lengths, there are sequential decodings for both hard and soft decisions. There are also possible Viterbi-type decodings that may be simple, as in a convolutional encoding/decoding of the extended Golay Code. In addition, the previously found constraint length K = 9 for the QR (48, 24;12) Code is lowered here to K = 8.

Survey of Expert Opinion on Intelligence and Aptitude Testing.

ERIC Educational Resources Information Center

Snyderman, Mark; Rothman, Stanley

1987-01-01

Psychologists and educational specialists with expertise in areas related to intelligence testing responded to a questionnaire dealing with possible racial and socioeconomic bias of IQ tests. Overall, experts hold positive attitudes about the validity and usefulness of intelligence and aptitude tests. (Author/LHW)

Fast Fiber-Coupled Imaging Devices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brockington, Samuel; Case, Andrew; Witherspoon, Franklin Douglas

HyperV Technologies Corp. has successfully designed, built and experimentally demonstrated a full scale 1024 pixel 100 MegaFrames/s fiber coupled camera with 12 or 14 bits, and record lengths of 32K frames, exceeding our original performance objectives. This high-pixel-count, fiber optically-coupled, imaging diagnostic can be used for investigating fast, bright plasma events. In Phase 1 of this effort, a 100 pixel fiber-coupled fast streak camera for imaging plasma jet profiles was constructed and successfully demonstrated. The resulting response from outside plasma physics researchers emphasized development of increased pixel performance as a higher priority over increasing pixel count. In this Phase 2more » effort, HyperV therefore focused on increasing the sample rate and bit-depth of the photodiode pixel designed in Phase 1, while still maintaining a long record length and holding the cost per channel to levels which allowed up to 1024 pixels to be constructed. Cost per channel was 53.31 dollars, very close to our original target of $50 per channel. The system consists of an imaging "camera head" coupled to a photodiode bank with an array of optical fibers. The output of these fast photodiodes is then digitized at 100 Megaframes per second and stored in record lengths of 32,768 samples with bit depths of 12 to 14 bits per pixel. Longer record lengths are possible with additional memory. A prototype imaging system with up to 1024 pixels was designed and constructed and used to successfully take movies of very fast moving plasma jets as a demonstration of the camera performance capabilities. Some faulty electrical components on the 64 circuit boards resulted in only 1008 functional channels out of 1024 on this first generation prototype system. We experimentally observed backlit high speed fan blades in initial camera testing and then followed that with full movies and streak images of free flowing high speed plasma jets (at 30-50 km/s). Jet structure and jet collisions onto metal pillars in the path of the plasma jets were recorded in a single shot. This new fast imaging system is an attractive alternative to conventional fast framing cameras for applications and experiments where imaging events using existing techniques are inefficient or impossible. The development of HyperV's new diagnostic was split into two tracks: a next generation camera track, in which HyperV built, tested, and demonstrated a prototype 1024 channel camera at its own facility, and a second plasma community beta test track, where selected plasma physics programs received small systems of a few test pixels to evaluate the expected performance of a full scale camera on their experiments. These evaluations were performed as part of an unfunded collaboration with researchers at Los Alamos National Laboratory and the University of California at Davis. Results from the prototype 1024-pixel camera are discussed, as well as results from the collaborations with test pixel system deployment sites.« less

Electromagnetic reprogrammable coding-metasurface holograms.

PubMed

Li, Lianlin; Jun Cui, Tie; Ji, Wei; Liu, Shuo; Ding, Jun; Wan, Xiang; Bo Li, Yun; Jiang, Menghua; Qiu, Cheng-Wei; Zhang, Shuang

2017-08-04

Metasurfaces have enabled a plethora of emerging functions within an ultrathin dimension, paving way towards flat and highly integrated photonic devices. Despite the rapid progress in this area, simultaneous realization of reconfigurability, high efficiency, and full control over the phase and amplitude of scattered light is posing a great challenge. Here, we try to tackle this challenge by introducing the concept of a reprogrammable hologram based on 1-bit coding metasurfaces. The state of each unit cell of the coding metasurface can be switched between '1' and '0' by electrically controlling the loaded diodes. Our proof-of-concept experiments show that multiple desired holographic images can be realized in real time with only a single coding metasurface. The proposed reprogrammable hologram may be a key in enabling future intelligent devices with reconfigurable and programmable functionalities that may lead to advances in a variety of applications such as microscopy, display, security, data storage, and information processing.Realizing metasurfaces with reconfigurability, high efficiency, and control over phase and amplitude is a challenge. Here, Li et al. introduce a reprogrammable hologram based on a 1-bit coding metasurface, where the state of each unit cell of the coding metasurface can be switched electrically.

Fifty years of progress in speech coding standards

NASA Astrophysics Data System (ADS)

Cox, Richard

2004-10-01

Over the past 50 years, speech coding has taken root worldwide. Early applications were for the military and transmission for telephone networks. The military gave equal priority to intelligibility and low bit rate. The telephone network gave priority to high quality and low delay. These illustrate three of the four areas in which requirements must be set for any speech coder application: bit rate, quality, delay, and complexity. While the military could afford relatively expensive terminal equipment for secure communications, the telephone network needed low cost for massive deployment in switches and transmission equipment worldwide. Today speech coders are at the heart of the wireless phones and telephone answering systems we use every day. In addition to the technology and technical invention that has occurred, standards make it possible for all these different systems to interoperate. The primary areas of standardization are the public switched telephone network, wireless telephony, and secure telephony for government and military applications. With the advent of IP telephony there are additional standardization efforts and challenges. In this talk the progress in all areas is reviewed as well as a reflection on Jim Flanagan's impact on this field during the past half century.

Servo-integrated patterned media by hybrid directed self-assembly.

PubMed

Xiao, Shuaigang; Yang, Xiaomin; Steiner, Philip; Hsu, Yautzong; Lee, Kim; Wago, Koichi; Kuo, David

2014-11-25

A hybrid directed self-assembly approach is developed to fabricate unprecedented servo-integrated bit-patterned media templates, by combining sphere-forming block copolymers with 5 teradot/in.(2) resolution capability, nanoimprint and optical lithography with overlay control. Nanoimprint generates prepatterns with different dimensions in the data field and servo field, respectively, and optical lithography controls the selective self-assembly process in either field. Two distinct directed self-assembly techniques, low-topography graphoepitaxy and high-topography graphoepitaxy, are elegantly integrated to create bit-patterned templates with flexible embedded servo information. Spinstand magnetic test at 1 teradot/in.(2) shows a low bit error rate of 10(-2.43), indicating fully functioning bit-patterned media and great potential of this approach for fabricating future ultra-high-density magnetic storage media.

Issues in Adaptive Planning

DTIC Science & Technology

1986-06-30

approach to the application of theorem proving to problem solving, Aritificial Intelligence 2 (1Q71), 18Q- 208. 4. Fikes, R., Hart, P. and Nilsson, N...by emphasizing the structure of knowledge. 1.2. Planning Literature The earliest work in planning in Artificial Intelligence grew out of the work on...References 1. Newell, A., Artificial Intelligence and the concept of mind, in Computer models of thought and language, Schank, R. and Colby, K. (editor

Emotional intelligence among nursing students: Findings from a cross-sectional study.

PubMed

Štiglic, Gregor; Cilar, Leona; Novak, Žiga; Vrbnjak, Dominika; Stenhouse, Rosie; Snowden, Austyn; Pajnkihar, Majda

2018-07-01

Emotional intelligence in nursing is of global interest. International studies identify that emotional intelligence influences nurses' work and relationships with patients. It is associated with compassion and care. Nursing students scored higher on measures of emotional intelligence compared to students of other study programmes. The level of emotional intelligence increases with age and tends to be higher in women. This study aims to measure the differences in emotional intelligence between nursing students with previous caring experience and those without; to examine the effects of gender on emotional intelligence scores; and to test whether nursing students score higher than engineering colleagues on emotional intelligence measures. A cross-sectional descriptive study design was used. The study included 113 nursing and 104 engineering students at the beginning of their first year of study at a university in Slovenia. Emotional intelligence was measured using the Trait Emotional Intelligence Questionnaire (TEIQue) and Schutte Self Report Emotional Intelligence Test (SSEIT). Shapiro-Wilk's test of normality was used to test the sample distribution, while the differences in mean values were tested using Student t-test of independent samples. Emotional intelligence was higher in nursing students (n = 113) than engineering students (n = 104) in both measures [TEIQue t = 3.972; p < 0.001; SSEIT t = 8.288; p < 0.001]. Although nursing female students achieved higher emotional intelligence scores than male students on both measures, the difference was not statistically significant [TEIQue t = -0.839; p = 0.403; SSEIT t = -1.159; p = 0.249]. EI scores in nursing students with previous caring experience were not higher compared to students without such experience for any measure [TEIQue t = -1.633; p = 0.105; SSEIT t = -0.595; p = 0.553]. Emotional intelligence was higher in nursing than engineering students, and slightly higher in women than men. It was not associated with previous caring experience. Copyright © 2018 Elsevier Ltd. All rights reserved.

76 FR 60128 - Senior Executive Service; Legal Division Performance Review Board

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-28

...; M.J.K. Maher, Jr., Deputy Assistant General Counsel (Enforcement & Intelligence); Margaret V... Counsel; Mark Monborne, Assistant General Counsel (Enforcement & Intelligence); Helen Morrison, Deputy Benefits Tax Counsel; Kevin Rice, Chief Counsel, Bureau of Engraving and Printing; Daniel P. Shaver, Chief...

75 FR 62921 - Senior Executive Service; Legal Division Performance Review Board

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-13

... Law and Regulation); M.J.K. Maher, Jr., Deputy Assistant General Counsel (Enforcement & Intelligence... General Counsel; Mark Monborne, Assistant General Counsel (Enforcement & Intelligence); Clarissa C. Potter... Engraving and Printing; Laurie Schaffer, Assistant General Counsel (Banking and Finance); Daniel P. Shaver...

A Novel Artificial Intelligence System for Endotracheal Intubation.

PubMed

Carlson, Jestin N; Das, Samarjit; De la Torre, Fernando; Frisch, Adam; Guyette, Francis X; Hodgins, Jessica K; Yealy, Donald M

2016-01-01

Adequate visualization of the glottic opening is a key factor to successful endotracheal intubation (ETI); however, few objective tools exist to help guide providers' ETI attempts toward the glottic opening in real-time. Machine learning/artificial intelligence has helped to automate the detection of other visual structures but its utility with ETI is unknown. We sought to test the accuracy of various computer algorithms in identifying the glottic opening, creating a tool that could aid successful intubation. We collected a convenience sample of providers who each performed ETI 10 times on a mannequin using a video laryngoscope (C-MAC, Karl Storz Corp, Tuttlingen, Germany). We recorded each attempt and reviewed one-second time intervals for the presence or absence of the glottic opening. Four different machine learning/artificial intelligence algorithms analyzed each attempt and time point: k-nearest neighbor (KNN), support vector machine (SVM), decision trees, and neural networks (NN). We used half of the videos to train the algorithms and the second half to test the accuracy, sensitivity, and specificity of each algorithm. We enrolled seven providers, three Emergency Medicine attendings, and four paramedic students. From the 70 total recorded laryngoscopic video attempts, we created 2,465 time intervals. The algorithms had the following sensitivity and specificity for detecting the glottic opening: KNN (70%, 90%), SVM (70%, 90%), decision trees (68%, 80%), and NN (72%, 78%). Initial efforts at computer algorithms using artificial intelligence are able to identify the glottic opening with over 80% accuracy. With further refinements, video laryngoscopy has the potential to provide real-time, direction feedback to the provider to help guide successful ETI.

Perspective on Intelligence Testing.

ERIC Educational Resources Information Center

Lennon, Roger T.

1978-01-01

We should seek an updated perspective on intelligence testing because it is useful to reevaluate any practice that has long become institutionalized, especially one that is subject to severe criticism. Cultural bias is the most prominent criticism. Testing proponents contend that intelligence tests reflect skills and knowledge emphasized in school…

Automatic diagnosis of tuberculosis disease based on Plasmonic ELISA and color-based image classification.

PubMed

AbuHassan, Kamal J; Bakhori, Noremylia M; Kusnin, Norzila; Azmi, Umi Z M; Tania, Marzia H; Evans, Benjamin A; Yusof, Nor A; Hossain, M A

2017-07-01

Tuberculosis (TB) remains one of the most devastating infectious diseases and its treatment efficiency is majorly influenced by the stage at which infection with the TB bacterium is diagnosed. The available methods for TB diagnosis are either time consuming, costly or not efficient. This study employs a signal generation mechanism for biosensing, known as Plasmonic ELISA, and computational intelligence to facilitate automatic diagnosis of TB. Plasmonic ELISA enables the detection of a few molecules of analyte by the incorporation of smart nanomaterials for better sensitivity of the developed detection system. The computational system uses k-means clustering and thresholding for image segmentation. This paper presents the results of the classification performance of the Plasmonic ELISA imaging data by using various types of classifiers. The five-fold cross-validation results show high accuracy rate (>97%) in classifying TB images using the entire data set. Future work will focus on developing an intelligent mobile-enabled expert system to diagnose TB in real-time. The intelligent system will be clinically validated and tested in collaboration with healthcare providers in Malaysia.

Acquisition of shape information in working memory, as a function of viewing time and number of consecutive images: evidence for a succession of discrete storage classes.

PubMed

Ninio, J

1998-07-01

The capacity of visual working memory was investigated using abstract images that were slightly distorted NxN (with generally N=8) square lattices of black or white randomly selected elements. After viewing an image, or a sequence of images, the subjects viewed couples of images containing the test image and a distractor image derived from the first one by changing the black or white value of q randomly selected elements. The number q was adjusted in each experiment to the difficulty of the task and the abilities of the subject. The fraction of recognition errors, given q and N was used to evaluate the number M of bits memorized by the subject. For untrained subjects, this number M varied in a biphasic manner as a function of the time t of presentation of the test image: it was on average 13 bits for 1 s, 16 bits for 2 to 5 s, and 20 bits for 8 s. The slow pace of acquisition, from 1 to 8 s, seems due to encoding difficulties, and not to channel capacity limitations. Beyond 8 s, M(t), accurately determined for one subject, followed a square root law, in agreement with 19th century observations on the memorization of lists of digits. When two consecutive 8x8 images were viewed and tested in the same order, the number of memorized bits was downshifted by a nearly constant amount, independent of t, and equal on average to 6-7 bits. Across the subjects, the shift was independent of M. When two consecutive test images were related, the recognition errors decreased for both images, whether the testing was performed in the presentation or the reverse order. Studies involving three subjects, indicate that, when viewing m consecutive images, the average amount of information captured per image varies with m in a stepwise fashion. The first two step boundaries were around m=3 and m=9-12. The data are compatible with a model of organization of working memory in several successive layers containing increasing numbers of units, the more remote a unit, the lower the rate at which it may acquire encoded information. Copyright 1998 Elsevier Science B.V.

Executive functioning in schizophrenia: Unique and shared variance with measures of fluid intelligence.

PubMed

Martin, A K; Mowry, B; Reutens, D; Robinson, G A

2015-10-01

Patients with schizophrenia often display deficits on tasks thought to measure "executive" processes. Recently, it has been suggested that reductions in fluid intelligence test performance entirely explain deficits reported for patients with focal frontal lesions on classical executive tasks. For patients with schizophrenia, it is unclear whether deficits on executive tasks are entirely accountable by fluid intelligence and representative of a common general process or best accounted for by distinct contributions to the cognitive profile of schizophrenia. In the current study, 50 patients with schizophrenia and 50 age, sex and premorbid intelligence matched controls were assessed using a broad neuropsychological battery, including tasks considered sensitive to executive abilities, namely the Hayling Sentence Completion Test (HSCT), word fluency, Stroop test, digit-span backwards, and spatial working memory. Fluid intelligence was measured using both the Matrix reasoning subtest from the Weschler Abbreviated Scale of Intelligence (WASI) and a composite score derived from a number of cognitive tests. Patients with schizophrenia were impaired on all cognitive measures compared with controls, except smell identification and the optimal betting and risk-taking measures from the Cambridge Gambling Task. After introducing fluid intelligence as a covariate, significant differences remained for HSCT suppression errors, and classical executive function tests such as the Stroop test and semantic/phonemic word fluency, regardless of which fluid intelligence measure was included. Fluid intelligence does not entirely explain impaired performance on all tests considered as reflecting "executive" processes. For schizophrenia, these measures should remain part of a comprehensive neuropsychological assessment alongside a measure of fluid intelligence. Copyright © 2015 Elsevier Inc. All rights reserved.

Gigapan Voyage for Robotic Recon

NASA Technical Reports Server (NTRS)

Lee, Susan Y.; Moorse, Theodore Fitzgerald; Park, Eric J.

2010-01-01

Gigapan Voyage (GV) is a self-contained remotely-operable Gigapan capturing system that is currently being developed by the Intelligent Robotics Group (IRG) at NASA Ames Research Center. Gigapan Voyage was primarily designed to be integrated onto Johnson Space Center s Lunar Electric Rovers (LER). While on LER, Gigapan Voyage was used by scientists and astronauts during the 2009 and 2010 Desert RATS field tests. The concept behind Gigapan Voyage is to merge all the sub-components of the commercial GigaPan system into an all-in-one system that can capture, stitch, and display Gigapans in an automated way via a simple web interface. The GV system enables NASA to quickly and easily add remote-controlled Gigapan capturing capability onto rovers with minimal integration effort. Key Words: Geology, NASA, Black Point Lava Flow, Robot, K10, LER, Gigapan Voyage, Desert RATS, Intelligent Robotics Group

STAR- A SIMPLE TOOL FOR AUTOMATED REASONING SUPPORTING HYBRID APPLICATIONS OF ARTIFICIAL INTELLIGENCE (DEC VAX VERSION)

NASA Technical Reports Server (NTRS)

Borchardt, G. C.

1994-01-01

The Simple Tool for Automated Reasoning program (STAR) is an interactive, interpreted programming language for the development and operation of artificial intelligence (AI) application systems. STAR provides an environment for integrating traditional AI symbolic processing with functions and data structures defined in compiled languages such as C, FORTRAN and PASCAL. This type of integration occurs in a number of AI applications including interpretation of numerical sensor data, construction of intelligent user interfaces to existing compiled software packages, and coupling AI techniques with numerical simulation techniques and control systems software. The STAR language was created as part of an AI project for the evaluation of imaging spectrometer data at NASA's Jet Propulsion Laboratory. Programming in STAR is similar to other symbolic processing languages such as LISP and CLIP. STAR includes seven primitive data types and associated operations for the manipulation of these structures. A semantic network is used to organize data in STAR, with capabilities for inheritance of values and generation of side effects. The AI knowledge base of STAR can be a simple repository of records or it can be a highly interdependent association of implicit and explicit components. The symbolic processing environment of STAR may be extended by linking the interpreter with functions defined in conventional compiled languages. These external routines interact with STAR through function calls in either direction, and through the exchange of references to data structures. The hybrid knowledge base may thus be accessed and processed in general by either side of the application. STAR is initially used to link externally compiled routines and data structures. It is then invoked to interpret the STAR rules and symbolic structures. In a typical interactive session, the user enters an expression to be evaluated, STAR parses the input, evaluates the expression, performs any file input/output required, and displays the results. The STAR interpreter is written in the C language for interactive execution. It has been implemented on a VAX 11/780 computer operating under VMS, and the UNIX version has been implemented on a Sun Microsystems 2/170 workstation. STAR has a memory requirement of approximately 200K of 8 bit bytes, excluding externally compiled functions and application-dependent symbolic definitions. This program was developed in 1985.

STAR- A SIMPLE TOOL FOR AUTOMATED REASONING SUPPORTING HYBRID APPLICATIONS OF ARTIFICIAL INTELLIGENCE (UNIX VERSION)

NASA Technical Reports Server (NTRS)

Borchardt, G. C.

1994-01-01

The Simple Tool for Automated Reasoning program (STAR) is an interactive, interpreted programming language for the development and operation of artificial intelligence (AI) application systems. STAR provides an environment for integrating traditional AI symbolic processing with functions and data structures defined in compiled languages such as C, FORTRAN and PASCAL. This type of integration occurs in a number of AI applications including interpretation of numerical sensor data, construction of intelligent user interfaces to existing compiled software packages, and coupling AI techniques with numerical simulation techniques and control systems software. The STAR language was created as part of an AI project for the evaluation of imaging spectrometer data at NASA's Jet Propulsion Laboratory. Programming in STAR is similar to other symbolic processing languages such as LISP and CLIP. STAR includes seven primitive data types and associated operations for the manipulation of these structures. A semantic network is used to organize data in STAR, with capabilities for inheritance of values and generation of side effects. The AI knowledge base of STAR can be a simple repository of records or it can be a highly interdependent association of implicit and explicit components. The symbolic processing environment of STAR may be extended by linking the interpreter with functions defined in conventional compiled languages. These external routines interact with STAR through function calls in either direction, and through the exchange of references to data structures. The hybrid knowledge base may thus be accessed and processed in general by either side of the application. STAR is initially used to link externally compiled routines and data structures. It is then invoked to interpret the STAR rules and symbolic structures. In a typical interactive session, the user enters an expression to be evaluated, STAR parses the input, evaluates the expression, performs any file input/output required, and displays the results. The STAR interpreter is written in the C language for interactive execution. It has been implemented on a VAX 11/780 computer operating under VMS, and the UNIX version has been implemented on a Sun Microsystems 2/170 workstation. STAR has a memory requirement of approximately 200K of 8 bit bytes, excluding externally compiled functions and application-dependent symbolic definitions. This program was developed in 1985.

Survey and Analysis of Environmental Requirements for Shipboard Electronic Equipment Applications. Appendix B. Volume 3.

DTIC Science & Technology

1991-07-31

memory banks Up to 1.25MByte SRAM 5 planes of 2048 x 1024 pixels Programmable video parameters max 720 x 512 pixels Sixteen colors TTL RGBI standard...bit I/O extension bus (VLXbus) Up to 2048 KByte 0-wait state static RAM BTT (Built-In-Test) PAL selectable dual ported VMEbus address Two RS-232/422...16, 25, or 33 MHz) A16/24:D08/16 VMEbus interface 8/16-bit I/O Extension bus (VLXbus) Up to 2048 KByte 32-bit wide static RAM -- 0-wait state at 16

IQ Test Controversy: Past, Present, and Future Trends.

ERIC Educational Resources Information Center

Alford, David W.

The controversies surrounding the use of intelligence quotient (IQ) tests with children are summarized. This article discusses what intelligence is and how intelligence is measured. It also examines factors which can affect measurement, including examiner training or bias, examinee age, misinterpretation of test scores, and poor tests. The…

A Multi-Resolution Mode CMOS Image Sensor with a Novel Two-Step Single-Slope ADC for Intelligent Surveillance Systems.

PubMed

Kim, Daehyeok; Song, Minkyu; Choe, Byeongseong; Kim, Soo Youn

2017-06-25

In this paper, we present a multi-resolution mode CMOS image sensor (CIS) for intelligent surveillance system (ISS) applications. A low column fixed-pattern noise (CFPN) comparator is proposed in 8-bit two-step single-slope analog-to-digital converter (TSSS ADC) for the CIS that supports normal, 1/2, 1/4, 1/8, 1/16, 1/32, and 1/64 mode of pixel resolution. We show that the scaled-resolution images enable CIS to reduce total power consumption while images hold steady without events. A prototype sensor of 176 × 144 pixels has been fabricated with a 0.18 μm 1-poly 4-metal CMOS process. The area of 4-shared 4T-active pixel sensor (APS) is 4.4 μm × 4.4 μm and the total chip size is 2.35 mm × 2.35 mm. The maximum power consumption is 10 mW (with full resolution) with supply voltages of 3.3 V (analog) and 1.8 V (digital) and 14 frame/s of frame rates.

Acceptable bit-rates for human face identification from CCTV imagery

NASA Astrophysics Data System (ADS)

Tsifouti, Anastasia; Triantaphillidou, Sophie; Bilissi, Efthimia; Larabi, Mohamed-Chaker

2013-01-01

The objective of this investigation is to produce recommendations for acceptable bit-rates of CCTV footage of people onboard London buses. The majority of CCTV recorders on buses use a proprietary format based on the H.264/AVC video coding standard, exploiting both spatial and temporal redundancy. Low bit-rates are favored in the CCTV industry but they compromise the image usefulness of the recorded imagery. In this context usefulness is defined by the presence of enough facial information remaining in the compressed image to allow a specialist to identify a person. The investigation includes four steps: 1) Collection of representative video footage. 2) The grouping of video scenes based on content attributes. 3) Psychophysical investigations to identify key scenes, which are most affected by compression. 4) Testing of recording systems using the key scenes and further psychophysical investigations. The results are highly dependent upon scene content. For example, very dark and very bright scenes were the most challenging to compress, requiring higher bit-rates to maintain useful information. The acceptable bit-rates are also found to be dependent upon the specific CCTV system used to compress the footage, presenting challenges in drawing conclusions about universal `average' bit-rates.

Emotional intelligence and psychological health in a sample of Kuwaiti college students.

PubMed

Alkhadher, Othman

2007-06-01

This summary investigated correlations between emotional intelligence and psychological health amongst 191 Kuwaiti undergraduate students in psychology, 98 men and 93 women (M age=20.6 yr., SD=2.8). There were two measures of emotional intelligence, one based on the ability model, the Arabic Test for Emotional Intelligence, and the other on the mixed model, the Emotional Intelligence Questionnaire. Participants' psychological health was assessed using scales from the Personality Assessment Inventory. A weak relationship between the two types of emotional intelligence was found. A correlation for scores on the Emotional Intelligence Questionnaire with the Personality Assessment Inventory was found but not with those of the Arabic Test for Emotional Intelligence. Regression analysis indicated scores on Managing Emotions and Self-awareness accounted for most of the variance in the association with the Personality Assessment Inventory. Significant sex differences were found only on the Arabic Test for Emotional Intelligence; women scored higher than men. On Emotional Intelligence Questionnaire measures, men had significantly higher means on Managing Emotions and Self-motivation. However, no significant differences were found between the sexes on the Total Emotional Intelligence Questionnaire scores.

Emotional Intelligence Tests: Potential Impacts on the Hiring Process for Accounting Students

ERIC Educational Resources Information Center

Nicholls, Shane; Wegener, Matt; Bay, Darlene; Cook, Gail Lynn

2012-01-01

Emotional intelligence is increasingly recognized as being important for professional career success. Skills related to emotional intelligence (e.g. organizational commitment, public speaking, teamwork, and leadership) are considered essential. Human resource professionals have begun including tests of emotional intelligence (EI) in job applicant…

Intelligence Testing 1928-1978: What Next?

ERIC Educational Resources Information Center

Vernon, Philip E.

Attention is drawn to the ways in which current conceptions of intelligence and its measurement differ from those which were generally accepted in 1928. The following principles underlying intelligence testing were generally agreed upon in 1928: (1) the assumption of intelligence as a recognizable attribute, responsible for differences among…

A fully integrated mixed-signal neural processor for implantable multichannel cortical recording.

PubMed

Sodagar, Amir M; Wise, Kensall D; Najafi, Khalil

2007-06-01

A 64-channel neural processor has been developed for use in an implantable neural recording microsystem. In the Scan Mode, the processor is capable of detecting neural spikes by programmable positive, negative, or window thresholding. Spikes are tagged with their associated channel addresses and formed into 18-bit data words that are sent serially to the external host. In the Monitor Mode, two channels can be selected and viewed at high resolution for studies where the entire signal is of interest. The processor runs from a 3-V supply and a 2-MHz clock, with a channel scan rate of 64 kS/s and an output bit rate of 2 Mbps.

A Study of Communication Processor Systems

DTIC Science & Technology

1979-12-01

STUDYSCOFONLA (A . TIS R I8TIO S" - EEG R AN T-i R $a t 17. DITR UTO STTEeN in h b’*l.elldi 1Ok 0 ~45ft i9~a R,1OI)7 -C S. APeMr’wl NOTES Uh a DC gt~ & C...MM Fig. 3.3 Pluribus syste m II 24 -4~ I tm ap B u s- ----I FP K K Cmi Cornrnjer MeodUlO Fig. 3.4 Carnegie "iellLfn CmI* 25 0I M r K K P M K KP M K...144 bits incurs a mean transmission delay (o ) of 0.29 milli- seconds. The maximum transmission delays TDF and TDC can be obtained as 15 milliseconds

Incendivity of some coal-cutter materials by impact-abrasion in air-methane

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blickensderfer, R.; Deardorff, D.K.; Kelley, J.E.

1974-01-01

Test equipment that simulated frictional impacts between coal-cutter bits and mineral inclusions at a coal face during operation of a continuous coal mining machine was used to study the incendivity of impacts between various rocks, metals, and hard-metal alloys in an explosive mixture of air-7 pct natural gas. Quartzitic sandstone was found to be the most incendive of several rocks tested. Limestone concretions from a coal seam, known locally as ''sulfur balls,'' sparked furiously but were not incendive. Among the metals tested, the type of steel used in commercial coal-cutter tools was the most incendive material tested. A 17-4PH stainlessmore » steel was less incendive and appears to be the most promising high-strength steel alloy, reasonably economical, for use in coal-cutter bits. Some hard-metal alloys, primarily titanium and zirconium diboride composites, were also evaluated as possible replacements for the conventional cobalt-bonded tungsten carbide used in the tip of coal-cutter bits. The metal-bonded diborides were generally less incendive (but more brittle) than the conventional tungsten carbide. Carbonitride coatings on tool bits were also tested but found to have no advantage. The source of ignition during frictional impact between metal and rock was studied. Immediately after impact, a yellow flash was observed and a smear of metal near its melting point occurred on the rock. This hotspot on the rock, rather than the yellow flash or sparks or metal fragments, was observed to be the cause of the ignition.« less

Age differences and interindividual variation in cognition in community-dwelling elderly.

PubMed

Christensen, H; Mackinnon, A; Jorm, A F; Henderson, A S; Scott, L R; Korten, A E

1994-09-01

The cognitive test performance of 897 community-dwelling elderly Ss, aged 70 years and over, was examined for age trends and interindividual variation. Data were subjected to factor analysis, and 3 factors emerged (Crystallized Intelligence, Fluid Intelligence, and Memory). Over the age span sampled, Crystallized Intelligence, Fluid Intelligence, and Memory all decreased with the decrease being greatest for Fluid Intelligence and least for Crystallized Intelligence. Interindividual variation increased for Fluid Intelligence and Memory, but not for Crystallized Intelligence. These findings give support to the view that crystallized intelligence is lower in the very old and that there is a greater degree of variability in test performance with advancing age.

The Reliability of Recorded Text Test Scores: Widespread Inconsistent Intelligibility Testing in Minority Languages

ERIC Educational Resources Information Center

Yoder, Zachariah

2017-01-01

The recorded text test (RTT) is commonly used to test dialect intelligibility, often to inform language development decisions. More than 25 papers using the RTT method were published on www.sil.org/silesr from January 2009 to March 2013. As introduced by Casad [1974. "Dialect Intelligibility Testing." Summer Institute of Linguistics…

The Development of the Wechsler Scales and Their Influence on Contemporary Intelligence Testing

ERIC Educational Resources Information Center

Benisz, Mark

2014-01-01

The history of intelligence testing merits study as standardized intelligence tests have been administered for only a little over a century. The most popular tests in use today are the Wechsler scales, despite the availability of other test batteries that are better grounded in contemporary theory. To understand why contemporary revisions of…

Automatic Control and Data Acquisition System for Combustion Laboratory Applications.

DTIC Science & Technology

1982-10-01

O VPI Access~.ion FCr- 1473 2 UNCLASSIFIED Approved for public release; distribution unlimited JAutomatic Control and Data Acquisition System for...unit. The CPU/ROK board includes a 16 bit microprocessor chip which decodes and executes all in- structions, and controls all data transfers. The 12K...in the limited memory space of 32K of the HP-85 33 ACQDTA’ 1) Controls DevicesCRAIN ,2) Acquires Photodiods Output$ 3) Stores Data o Disc 1

Voxel-based Immersive Environments Immersive Environments

DTIC Science & Technology

2000-05-31

3D accelerated hardware. While this method lends itself well to modem hardware, the quality of the resulting images was low due to the coarse sampling...pipes. We will use MPEG video compression when sending video over T1 line, whereas for 56K bit Internet connection, we can use one of the more...sent over the communication line. The ultimate goal is to send the immersive environment over the 56K bps Internet. Since we need to send audio and

Exploring the validity of the Mayer-Salovey-Caruso Emotional Intelligence Test (MSCEIT) with established emotions measures.

PubMed

Roberts, Richard D; Schulze, Ralf; O'Brien, Kristin; MacCann, Carolyn; Reid, John; Maul, Andy

2006-11-01

Emotions measures represent an important means of obtaining construct validity evidence for emotional intelligence (EI) tests because they have the same theoretical underpinnings. Additionally, the extent to which both emotions and EI measures relate to intelligence is poorly understood. The current study was designed to address these issues. Participants (N = 138) completed the Mayer-Salovey-Caruso Emotional Intelligence Test (MSCEIT), two emotions measures, as well as four intelligence tests. Results provide mixed support for the model hypothesized to underlie the MSCEIT, with emotions research and EI measures failing to load on the same factor. The emotions measures loaded on the same factor as intelligence measures. The validity of certain EI components (in particular, Emotion Perception), as currently assessed, appears equivocal. Copyright 2006 APA, all rights reserved.

The Effects of Levodopa on Word Intelligibility in Parkinson's Disease

ERIC Educational Resources Information Center

De Letter, Miet; Santens, Patrick; Van Borsel, John

2005-01-01

Dysarthria is a common manifestation in patients with idiopathic Parkinson's disease. This study investigated the effects of levodopa on intelligibility in patients with Parkinson's disease. Ten participants were tested during on- and off-states using the Yorkston and Beukelman intelligibility test (1980). Intelligibility as scored by a panel of…

Re-Thinking Intelligence: Schools That Build the Mind

ERIC Educational Resources Information Center

Resnick, Lauren B.; Schantz, Faith

2015-01-01

We now understand that human intelligence, once thought to be determined almost solely by heredity, is malleable. In developed countries, average intelligence test scores have increased substantially since the tests began to be administered 100 years ago. In school settings, however, intelligence is often still treated as a fixed attribute that…

Emotional Intelligence: The MSCEIT from the Perspective of Generalizability Theory

ERIC Educational Resources Information Center

Follesdal, Hallvard; Hagtvet, Knut A.

2009-01-01

The Mayer, Salovey, & Caruso Emotional Intelligence Test (MSCEIT) has been reported to provide reliable scores for the four-branch ability model of emotional intelligence [Mayer, J. D., Salovey, P., & Caruso, D. R. (2002). "Mayer-Salovey-Caruso Emotional Intelligence Test (MSCEIT). User's manual." Toronto, Canada: Multi-Health…

The Pathways for Intelligible Speech: Multivariate and Univariate Perspectives

PubMed Central

Evans, S.; Kyong, J.S.; Rosen, S.; Golestani, N.; Warren, J.E.; McGettigan, C.; Mourão-Miranda, J.; Wise, R.J.S.; Scott, S.K.

2014-01-01

An anterior pathway, concerned with extracting meaning from sound, has been identified in nonhuman primates. An analogous pathway has been suggested in humans, but controversy exists concerning the degree of lateralization and the precise location where responses to intelligible speech emerge. We have demonstrated that the left anterior superior temporal sulcus (STS) responds preferentially to intelligible speech (Scott SK, Blank CC, Rosen S, Wise RJS. 2000. Identification of a pathway for intelligible speech in the left temporal lobe. Brain. 123:2400–2406.). A functional magnetic resonance imaging study in Cerebral Cortex used equivalent stimuli and univariate and multivariate analyses to argue for the greater importance of bilateral posterior when compared with the left anterior STS in responding to intelligible speech (Okada K, Rong F, Venezia J, Matchin W, Hsieh IH, Saberi K, Serences JT,Hickok G. 2010. Hierarchical organization of human auditory cortex: evidence from acoustic invariance in the response to intelligible speech. 20: 2486–2495.). Here, we also replicate our original study, demonstrating that the left anterior STS exhibits the strongest univariate response and, in decoding using the bilateral temporal cortex, contains the most informative voxels showing an increased response to intelligible speech. In contrast, in classifications using local “searchlights” and a whole brain analysis, we find greater classification accuracy in posterior rather than anterior temporal regions. Thus, we show that the precise nature of the multivariate analysis used will emphasize different response profiles associated with complex sound to speech processing. PMID:23585519

Smaller Footprint Drilling System for Deep and Hard Rock Environments; Feasibility of Ultra-High-Speed Diamond Drilling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arnis Judzis; Alan Black; Homer Robertson

2006-03-01

The two phase program addresses long-term developments in deep well and hard rock drilling. TerraTek believes that significant improvements in drilling deep hard rock will be obtained by applying ultra-high rotational speeds (greater than 10,000 rpm). The work includes a feasibility of concept research effort aimed at development that will ultimately result in the ability to reliably drill ''faster and deeper'' possibly with smaller, more mobile rigs. The principle focus is on demonstration testing of diamond bits rotating at speeds in excess of 10,000 rpm to achieve high rate of penetration (ROP) rock cutting with substantially lower inputs of energymore » and loads. The significance of the ultra-high rotary speed drilling system is the ability to drill into rock at very low weights on bit and possibly lower energy levels. The drilling and coring industry today does not practice this technology. The highest rotary speed systems in oil field and mining drilling and coring today run less than 10,000 rpm--usually well below 5,000 rpm. This document details the progress to date on the program entitled ''Smaller Footprint Drilling System for Deep and Hard Rock Environments: Feasibility of Ultra-High-Speed Diamond Drilling'' for the period starting 1 October 2004 through 30 September 2005. Additionally, research activity from 1 October 2005 through 28 February 2006 is included in this report: (1) TerraTek reviewed applicable literature and documentation and convened a project kick-off meeting with Industry Advisors in attendance. (2) TerraTek designed and planned Phase I bench scale experiments. Some difficulties continue in obtaining ultra-high speed motors. Improvements have been made to the loading mechanism and the rotational speed monitoring instrumentation. New drill bit designs have been provided to vendors for production. A more consistent product is required to minimize the differences in bit performance. A test matrix for the final core bit testing program has been completed. (3) TerraTek is progressing through Task 3 ''Small-scale cutting performance tests''. (4) Significant testing has been performed on nine different rocks. (5) Bit balling has been observed on some rock and seems to be more pronounces at higher rotational speeds. (6) Preliminary analysis of data has been completed and indicates that decreased specific energy is required as the rotational speed increases (Task 4). This data analysis has been used to direct the efforts of the final testing for Phase I (Task 5). (7) Technology transfer (Task 6) has begun with technical presentations to the industry (see Judzis).« less

Utility of Intelligence Tests for Treatment Planning, Classification, and Placement Decisions: Recent Empirical Findings and Future Directions.

ERIC Educational Resources Information Center

Gresham, Frank M.; Witt, Joseph C.

1997-01-01

Maintains that intelligence tests contribute little to the planning, implementation, and evaluation of instructional interventions for children. Suggests that intelligence tests are not useful in making differential diagnostic and classification determinations for children with mild learning problems and that such testing is not a cost-beneficial…

The Predictive Validity of Four Intelligence Tests for School Grades: A Small Sample Longitudinal Study

PubMed Central

Gygi, Jasmin T.; Hagmann-von Arx, Priska; Schweizer, Florine; Grob, Alexander

2017-01-01

Intelligence is considered the strongest single predictor of scholastic achievement. However, little is known regarding the predictive validity of well-established intelligence tests for school grades. We analyzed the predictive validity of four widely used intelligence tests in German-speaking countries: The Intelligence and Development Scales (IDS), the Reynolds Intellectual Assessment Scales (RIAS), the Snijders-Oomen Nonverbal Intelligence Test (SON-R 6-40), and the Wechsler Intelligence Scale for Children (WISC-IV), which were individually administered to 103 children (Mage = 9.17 years) enrolled in regular school. School grades were collected longitudinally after 3 years (averaged school grades, mathematics, and language) and were available for 54 children (Mage = 11.77 years). All four tests significantly predicted averaged school grades. Furthermore, the IDS and the RIAS predicted both mathematics and language, while the SON-R 6-40 predicted mathematics. The WISC-IV showed no significant association with longitudinal scholastic achievement when mathematics and language were analyzed separately. The results revealed the predictive validity of currently used intelligence tests for longitudinal scholastic achievement in German-speaking countries and support their use in psychological practice, in particular for predicting averaged school grades. However, this conclusion has to be considered as preliminary due to the small sample of children observed. PMID:28348543

Revisiting measurement invariance in intelligence testing in aging research: Evidence for almost complete metric invariance across age groups.

PubMed

Sprague, Briana N; Hyun, Jinshil; Molenaar, Peter C M

2017-01-01

Invariance of intelligence across age is often assumed but infrequently explicitly tested. Horn and McArdle (1992) tested measurement invariance of intelligence, providing adequate model fit but might not consider all relevant aspects such as sub-test differences. The goal of the current paper is to explore age-related invariance of the WAIS-R using an alternative model that allows direct tests of age on WAIS-R subtests. Cross-sectional data on 940 participants aged 16-75 from the WAIS-R normative values were used. Subtests examined were information, comprehension, similarities, vocabulary, picture completion, block design, picture arrangement, and object assembly. The two intelligence factors considered were fluid and crystallized intelligence. Self-reported ages were divided into young (16-22, n = 300), adult (29-39, n = 275), middle (40-60, n = 205), and older (61-75, n = 160) adult groups. Results suggested partial metric invariance holds. Although most of the subtests reflected fluid and crystalized intelligence similarly across different ages, invariance did not hold for block design on fluid intelligence and picture arrangement on crystallized intelligence for older adults. Additionally, there was evidence of a correlated residual between information and vocabulary for the young adults only. This partial metric invariance model yielded acceptable model fit compared to previously-proposed invariance models of Horn and McArdle (1992). Almost complete metric invariance holds for a two-factor model of intelligence. Most of the subtests were invariant across age groups, suggesting little evidence for age-related bias in the WAIS-R. However, we did find unique relationships between two subtests and intelligence. Future studies should examine age-related differences in subtests when testing measurement invariance in intelligence.

Human Processes in Intelligence Analysis: Phase I Overview

DTIC Science & Technology

1979-12-01

Inodrtpusehsreac, several operating definitions were thv model, and is based on field obser- adopted. A basic defnition was that vations made from tha...Similarly, the IMINT bo•xes of different analysts, analyst who understands the problems Comnputer data bases, such as those of of the reconnaissance pilot has...TaiulanNevl Franea 3 USA Aviation Test K, Pt Rucler. ATTN: STlG-P( I Prin Scientific Off. Ar-1 HIm mngr Rich Olv. Miniatry 1 USA Apy hr Av4iao SAWe

Accuracy study of computer-assisted drilling: the effect of bone density, drill bit characteristics, and use of a mechanical guide.

PubMed

Hüfner, T; Geerling, J; Oldag, G; Richter, M; Kfuri, M; Pohlemann, T; Krettek, C

2005-01-01

This study was designed to determine the clinical relevant accuracy of CT-based navigation for drilling. Experimental model. Laboratory. Twelve drills of varying lengths and diameters were tested with 2 different set-ups. Group 1 used free-hand navigated drilling technique with foam blocks equipped with titanium target points. Group 2 (control) used a newly developed 3-dimensional measurement device equipped with titanium target points with a fixed entry for the navigated drill to minimize bending forces. One examiner performed 690 navigated drillings using solely the monitor screen for control in both groups. The difference between the planned and the actual starting and target point (up to 150 mm distance) was measured (mm). Levene test and a nonpaired t test. Significance level was set as P < 0.05. The core accuracy of the navigation system measured with the 3-dimensional device was 0.5 mm. The mean distance from planned to actual entry points in group 1 was 1.3 (range, 0.6-3.4 mm). The mean distance between planned and actual target point was 3.4 (range, 1.7-5.8 mm). Free-hand navigated drilling showed an increased difference with increased length of the drill bits as well as with increased drilling channel for drill bits 2.5 and 3.2 mm and not for 3.5 and 4.5 mm (P < 0.05). The core accuracy of the navigation system is high. Compared with the navigated free-hand technique, the results suggest that drill bit deflection interferes directly with the precision. The precision is decreased when using small diameter and longer drill bits.

Relationships between Speech Intelligibility and Word Articulation Scores in Children with Hearing Loss

PubMed Central

Ertmer, David J.

2012-01-01

Purpose This investigation sought to determine whether scores from a commonly used word-based articulation test are closely associated with speech intelligibility in children with hearing loss. If the scores are closely related, articulation testing results might be used to estimate intelligibility. If not, the importance of direct assessment of intelligibility would be reinforced. Methods Forty-four children with hearing losses produced words from the Goldman-Fristoe Test of Articulation-2 and sets of 10 short sentences. Correlation analyses were conducted between scores for seven word-based predictor variables and percent-intelligible scores derived from listener judgments of stimulus sentences. Results Six of seven predictor variables were significantly correlated with percent-intelligible scores. However, regression analysis revealed that no single predictor variable or multi- variable model accounted for more than 25% of the variability in intelligibility scores. Implications The findings confirm the importance of assessing connected speech intelligibility directly. PMID:20220022

Compression performance of HEVC and its format range and screen content coding extensions

NASA Astrophysics Data System (ADS)

Li, Bin; Xu, Jizheng; Sullivan, Gary J.

2015-09-01

This paper presents a comparison-based test of the objective compression performance of the High Efficiency Video Coding (HEVC) standard, its format range extensions (RExt), and its draft screen content coding extensions (SCC). The current dominant standard, H.264/MPEG-4 AVC, is used as an anchor reference in the comparison. The conditions used for the comparison tests were designed to reflect relevant application scenarios and to enable a fair comparison to the maximum extent feasible - i.e., using comparable quantization settings, reference frame buffering, intra refresh periods, rate-distortion optimization decision processing, etc. It is noted that such PSNR-based objective comparisons generally provide more conservative estimates of HEVC benefit than are found in subjective studies. The experimental results show that, when compared with H.264/MPEG-4 AVC, HEVC version 1 provides a bit rate savings for equal PSNR of about 23% for all-intra coding, 34% for random access coding, and 38% for low-delay coding. This is consistent with prior studies and the general characterization that HEVC can provide about a bit rate savings of about 50% for equal subjective quality for most applications. The HEVC format range extensions provide a similar bit rate savings of about 13-25% for all-intra coding, 28-33% for random access coding, and 32-38% for low-delay coding at different bit rate ranges. For lossy coding of screen content, the HEVC screen content coding extensions achieve a bit rate savings of about 66%, 63%, and 61% for all-intra coding, random access coding, and low-delay coding, respectively. For lossless coding, the corresponding bit rate savings are about 40%, 33%, and 32%, respectively.

32 CFR 1901.63 - Specific exemptions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 6 2013-07-01 2013-07-01 false Specific exemptions. 1901.63 Section 1901.63 National Defense Other Regulations Relating to National Defense CENTRAL INTELLIGENCE AGENCY PUBLIC RIGHTS... section (k) of the Privacy Act, the Director of Central Intelligence has determined to exempt from section...

32 CFR 1901.63 - Specific exemptions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 6 2011-07-01 2011-07-01 false Specific exemptions. 1901.63 Section 1901.63 National Defense Other Regulations Relating to National Defense CENTRAL INTELLIGENCE AGENCY PUBLIC RIGHTS... section (k) of the Privacy Act, the Director of Central Intelligence has determined to exempt from section...

Exploration of peptides that fit into the thermally vibrating active site of cathepsin K protease by alternating artificial intelligence and molecular simulation

NASA Astrophysics Data System (ADS)

Nishiyama, Katsuhiko

2017-08-01

Eighteen tripeptides that fit into the thermally vibrating active site of cathepsin K were discovered by alternating artificial intelligence and molecular simulation. The 18 tripeptides fit the active site better than the cysteine protease inhibitor E64, and a better inhibitor of cathepsin K could be designed considering these tripeptides. Among the 18 tripeptides, Phe-Arg-Asp and Tyr-Arg-Asp fit the active site the best and their structural similarity should be considered in the design process. Interesting factors emerged from the structure of the decision tree, and its structural information will guide exploration of potential inhibitor molecules for proteases.

Cryptographic Properties of the Hidden Weighted Bit Function

DTIC Science & Technology

2013-12-23

valid OMB control number. 1. REPORT DATE 23 DEC 2013 2. REPORT TYPE 3. DATES COVERED 00-00-2013 to 00-00-2013 4. TITLE AND SUBTITLE...K. Feng, An Infinite Class of Balanced Vectorial Boolean Functions with Optimum Algebraic Immunity and Good Nonlinearity, in: IWCC 2009, In: LNCS

Evaluation of sonic IR for NDE at Lawrence Livermore National Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, W O

2001-02-01

Sonic IR was evaluated as an NDE technique at LLNL using a commercial ThermoSoniX system from Indigo Systems Corp. The main effort was to detect small cracks in aluminum oxide, a dense stiff ceramic. Test coupons were made containing 0.2-mm cracks by surface grinding, 1-mm cracks by compression with a Vickers bit, and 4-mm cracks by 3-point bending. Only the 3-point bend cracks produced thermal images. Several parts shattered during testing, perhaps by being forced at resonance by the 20-kHz acoustic probe. Tests on damaged carbon composite coupons produced thermal images that were in excellent agreement with ultrasonic inspection. Themore » composite results also showed some dependence on contact location of the acoustic probe, and on the method of support. Tests on glass with surface damage produced weak images at the pits. Tests on metal ballistic targets produced thermal images at the impact sites. Modal analyses suggest that the input frequency should be matched to the desired response, and also that forced resonance damaged some parts.« less

An integrated system for multichannel neuronal recording with spike/LFP separation, integrated A/D conversion and threshold detection.

PubMed

Perelman, Yevgeny; Ginosar, Ran

2007-01-01

A mixed-signal front-end processor for multichannel neuronal recording is described. It receives 12 differential-input channels of implanted recording electrodes. A programmable cutoff High Pass Filter (HPF) blocks dc and low-frequency input drift at about 1 Hz. The signals are band-split at about 200 Hz to low-frequency Local Field Potential (LFP) and high-frequency spike data (SPK), which is band limited by a programmable-cutoff LPF, in a range of 8-13 kHz. Amplifier offsets are compensated by 5-bit calibration digital-to-analog converters (DACs). The SPK and LFP channels provide variable amplification rates of up to 5000 and 500, respectively. The analog signals are converted into 10-bit digital form, and streamed out over a serial digital bus at up to 8 Mbps. A threshold filter suppresses inactive portions of the signal and emits only spike segments of programmable length. A prototype has been fabricated on a 0.35-microm CMOS process and tested successfully, demonstrating a 3-microV noise level. Special interface system incorporating an embedded CPU core in a programmable logic device accompanied by real-time software has been developed to allow connectivity to a computer host.

Microdot - A Four-Bit Microcontroller Designed for Distributed Low-End Computing in Satellites

NASA Astrophysics Data System (ADS)

2002-03-01

Many satellites are an integrated collection of sensors and actuators that require dedicated real-time control. For single processor systems, additional sensors require an increase in computing power and speed to provide the multi-tasking capability needed to service each sensor. Faster processors cost more and consume more power, which taxes a satellite's power resources and may lead to shorter satellite lifetimes. An alternative design approach is a distributed network of small and low power microcontrollers designed for space that handle the computing requirements of each individual sensor and actuator. The design of microdot, a four-bit microcontroller for distributed low-end computing, is presented. The design is based on previous research completed at the Space Electronics Branch, Air Force Research Laboratory (AFRL/VSSE) at Kirtland AFB, NM, and the Air Force Institute of Technology at Wright-Patterson AFB, OH. The Microdot has 29 instructions and a 1K x 4 instruction memory. The distributed computing architecture is based on the Philips Semiconductor I2C Serial Bus Protocol. A prototype was implemented and tested using an Altera Field Programmable Gate Array (FPGA). The prototype was operable to 9.1 MHz. The design was targeted for fabrication in a radiation-hardened-by-design gate-array cell library for the TSMC 0.35 micrometer CMOS process.

Gallium Electromagnetic (GEM) Thruster Performance Measurements

NASA Technical Reports Server (NTRS)

Thomas, Robert E.; Burton, Rodney L.; Polzin, K. A.

2009-01-01

Discharge current, terminal voltage, and mass bit measurements are performed on a coaxial gallium electromagnetic thruster at discharge currents in the range of 7-23 kA. It is found that the mass bit varies quadratically with the discharge current which yields a constant exhaust velocity of 20 km/s. Increasing the electrode radius ratio of the thruster from to 2.6 to 3.4 increases the thruster efficiency from 21% to 30%. When operating with a central gallium anode, macroparticles are ejected at all energy levels tested. A central gallium cathode ejects macroparticles when the current density exceeds 3.7 10(exp 8) A/square m . A spatially and temporally broad spectroscopic survey in the 220-520 nm range is used to determine which species are present in the plasma. The spectra show that neutral, singly, and doubly ionized gallium species are present in the discharge, as well as annular electrode species at higher energy levels. Axial Langmuir triple probe measurements yield electron temperatures in the range of 0.8-3.8 eV and electron densities in the range of 8 x 10(exp )20 to 1.6 x 10(exp 21) m(exp -3) . Triple probe measurements suggest an exhaust plume with a divergence angle of 9 , and a completely doubly ionized plasma at the ablating thruster cathode.

Intelligence assessments for children with cerebral palsy: a systematic review.

PubMed

Yin Foo, Rebecca; Guppy, Max; Johnston, Leanne M

2013-10-01

Cerebral palsy (CP) is defined as a primary disorder of posture and movement; however, approximately 45% of children with CP also have an intellectual impairment. Prevalence estimates are limited by a lack of guidelines for intelligence testing. This systematic review aims to identify and examine intelligence assessments for children with CP. Electronic databases (PubMed, PsycINFO, Web of Science, CINAHL, EMBASE, and ERIC) were searched to identify assessments that (1) measured intellectual function, (2) in children aged 4 to 18 years, (3) with CP, and (4) with psychometrics available. Searches yielded 48 assessments, of which nine provided psychometric data for children with CP. The included tests were the Columbia Mental Maturity Scale, the Leiter International Performance Scale, the Peabody Picture Vocabulary Test, the Pictorial Test of Intelligence, the Raven's Coloured Progressive Matrices, the Stanford-Binet Intelligence Scales, the Wechsler Adult Intelligence Scale, the Wechsler Intelligence Scale for Children, and the Wechsler Preschool and Primary Scale of Intelligence. Intelligence assessments in children with CP lack reliability data, consensus regarding validity data, and population-specific norms. Research is required to establish psychometrics for children with CP. For children with higher motor involvement and/or communication and/or visual impairments, multiple options are required to assess intelligence appropriately. © 2013 Mac Keith Press.

DDS-Suite - A Dynamic Data Acquisition, Processing, and Analysis System for Wind Tunnel Testing

NASA Technical Reports Server (NTRS)

Burnside, Jathan J.

2012-01-01

Wind Tunnels have optimized their steady-state data systems for acquisition and analysis and even implemented large dynamic-data acquisition systems, however development of near real-time processing and analysis tools for dynamic-data have lagged. DDS-Suite is a set of tools used to acquire, process, and analyze large amounts of dynamic data. Each phase of the testing process: acquisition, processing, and analysis are handled by separate components so that bottlenecks in one phase of the process do not affect the other, leading to a robust system. DDS-Suite is capable of acquiring 672 channels of dynamic data at rate of 275 MB / s. More than 300 channels of the system use 24-bit analog-to-digital cards and are capable of producing data with less than 0.01 of phase difference at 1 kHz. System architecture, design philosophy, and examples of use during NASA Constellation and Fundamental Aerodynamic tests are discussed.

SITE project. Phase 1: Continuous data bit-error-rate testing

NASA Technical Reports Server (NTRS)

Fujikawa, Gene; Kerczewski, Robert J.

1992-01-01

The Systems Integration, Test, and Evaluation (SITE) Project at NASA LeRC encompasses a number of research and technology areas of satellite communications systems. Phase 1 of this project established a complete satellite link simulator system. The evaluation of proof-of-concept microwave devices, radiofrequency (RF) and bit-error-rate (BER) testing of hardware, testing of remote airlinks, and other tests were performed as part of this first testing phase. This final report covers the test results produced in phase 1 of the SITE Project. The data presented include 20-GHz high-power-amplifier testing, 30-GHz low-noise-receiver testing, amplitude equalization, transponder baseline testing, switch matrix tests, and continuous-wave and modulated interference tests. The report also presents the methods used to measure the RF and BER performance of the complete system. Correlations of the RF and BER data are summarized to note the effects of the RF responses on the BER.

Testing of the Prototype Mars Drill and Sample Acquisition System in the Mars Analog Site of the Antarctica's Dry Valleys

NASA Astrophysics Data System (ADS)

Zacny, K.; Paulsen, G.; McKay, C.; Glass, B. J.; Marinova, M.; Davila, A. F.; Pollard, W. H.; Jackson, A.

2011-12-01

We report on the testing of the one meter class prototype Mars drill and cuttings sampling system, called the IceBreaker in the Dry Valleys of Antarctica. The drill consists of a rotary-percussive drill head, a sampling auger with a bit at the end having an integrated temperature sensor, a Z-stage for advancing the auger into the ground, and a sampling station for moving the augered ice shavings or soil cuttings into a sample cup. In November/December of 2010, the IceBreaker drill was tested in the Uni-versity Valley (within the Beacon Valley region of the Antarctic Dry Valleys). University Valley is a good analog to the Northern Polar Regions of Mars because a layer of dry soil lies on top of either ice-cemeted ground or massive ice (depending on the location within the valley). That is exactly what the 2007 Phoenix mission discovered on Mars. The drill demonstrated drilling in ice-cemented ground and in massive ice at the 1-1-100-100 level; that is the drill reached 1 meter in 1 hour with 100 Watts of power and 100 Newton Weight on Bit. This corresponds to an average energy of 100 Whr. At the same time, the bit temperature measured by the bit thermocouple did not exceed more than 10 °C above the formation temperature. The temperature also never exceeded freezing, which minimizes chances of getting stuck and also of altering the materials that are being sampled and analyzed. The samples in the forms of cuttings were acquired every 10 cm intervals into sterile bags. These tests have shown that drilling on Mars, in ice cemented ground with limited power, energy and Weight on Bit, and collecting samples in discrete depth intervals is possible within the given mass, power, and energy levels of a Phoenix-size lander and within the duration of a Phoenix-like mission.

A biclustering algorithm for extracting bit-patterns from binary datasets.

PubMed

Rodriguez-Baena, Domingo S; Perez-Pulido, Antonio J; Aguilar-Ruiz, Jesus S

2011-10-01

Binary datasets represent a compact and simple way to store data about the relationships between a group of objects and their possible properties. In the last few years, different biclustering algorithms have been specially developed to be applied to binary datasets. Several approaches based on matrix factorization, suffix trees or divide-and-conquer techniques have been proposed to extract useful biclusters from binary data, and these approaches provide information about the distribution of patterns and intrinsic correlations. A novel approach to extracting biclusters from binary datasets, BiBit, is introduced here. The results obtained from different experiments with synthetic data reveal the excellent performance and the robustness of BiBit to density and size of input data. Also, BiBit is applied to a central nervous system embryonic tumor gene expression dataset to test the quality of the results. A novel gene expression preprocessing methodology, based on expression level layers, and the selective search performed by BiBit, based on a very fast bit-pattern processing technique, provide very satisfactory results in quality and computational cost. The power of biclustering in finding genes involved simultaneously in different cancer processes is also shown. Finally, a comparison with Bimax, one of the most cited binary biclustering algorithms, shows that BiBit is faster while providing essentially the same results. The source and binary codes, the datasets used in the experiments and the results can be found at: http://www.upo.es/eps/bigs/BiBit.html dsrodbae@upo.es Supplementary data are available at Bioinformatics online.

Sleep stage classification with low complexity and low bit rate.

PubMed

Virkkala, Jussi; Värri, Alpo; Hasan, Joel; Himanen, Sari-Leena; Müller, Kiti

2009-01-01

Standard sleep stage classification is based on visual analysis of central (usually also frontal and occipital) EEG, two-channel EOG, and submental EMG signals. The process is complex, using multiple electrodes, and is usually based on relatively high (200-500 Hz) sampling rates. Also at least 12 bit analog to digital conversion is recommended (with 16 bit storage) resulting in total bit rate of at least 12.8 kbit/s. This is not a problem for in-house laboratory sleep studies, but in the case of online wireless self-applicable ambulatory sleep studies, lower complexity and lower bit rates are preferred. In this study we further developed earlier single channel facial EMG/EOG/EEG-based automatic sleep stage classification. An algorithm with a simple decision tree separated 30 s epochs into wakefulness, SREM, S1/S2 and SWS using 18-45 Hz beta power and 0.5-6 Hz amplitude. Improvements included low complexity recursive digital filtering. We also evaluated the effects of a reduced sampling rate, reduced number of quantization steps and reduced dynamic range on the sleep data of 132 training and 131 testing subjects. With the studied algorithm, it was possible to reduce the sampling rate to 50 Hz (having a low pass filter at 90 Hz), and the dynamic range to 244 microV, with an 8 bit resolution resulting in a bit rate of 0.4 kbit/s. Facial electrodes and a low bit rate enables the use of smaller devices for sleep stage classification in home environments.

Test Review: Wechsler Abbreviated Scale of Intelligence, Second Edition

ERIC Educational Resources Information Center

Irby, Sarah M.; Floyd, Randy G.

2013-01-01

The Wechsler Abbreviated Scale of Intelligence, Second Edition (WASI-II; Wechsler, 2011) is a brief intelligence test designed for individuals aged 6 through 90 years. It is a revision of the Wechsler Abbreviated Scale of Intelligence (WASI; Wechsler, 1999). During revision, there were three goals: enhancing the link between the Wechsler…

Single-Word Intelligibility in Speakers with Repaired Cleft Palate

ERIC Educational Resources Information Center

Whitehill, Tara; Chau, Cynthia

2004-01-01

Many speakers with repaired cleft palate have reduced intelligibility, but there are limitations with current procedures for assessing intelligibility. The aim of this study was to construct a single-word intelligibility test for speakers with cleft palate. The test used a multiple-choice identification format, and was based on phonetic contrasts…

The role of intelligence and feedback in children's strategy competence.

PubMed

Luwel, Koen; Foustana, Ageliki; Papadatos, Yiannis; Verschaffel, Lieven

2011-01-01

A test-intervention-test study was conducted investigating the role of intelligence on four parameters of strategy competence in the context of a numerosity judgment task. Moreover, the effectiveness of two feedback types on these four parameters was tested. In the two test sessions, the choice/no-choice method was used to assess the strategy repertoire, frequency, efficiency, and adaptivity of a group of low-, average-, and high-intelligence children. During the intervention, half of the participants from each intelligence group were given outcome feedback (OFB), whereas the other half received strategy feedback (SFB). The pretest data showed large differences among the three intelligence groups on all four strategy parameters. These differences had disappeared at the posttest due to a particularly strong improvement on all strategy parameters in the low-intelligence group. Furthermore, it was found that SFB was more beneficial than OFB for all parameters involving strategy selection. These results indicate that intelligence plays an important role in children's strategy use and suggest that strategy feedback can be a powerful instructional tool, especially for low-intelligence children. Copyright © 2010 Elsevier Inc. All rights reserved.

Fuel management optimization using genetic algorithms and expert knowledge

DOE Office of Scientific and Technical Information (OSTI.GOV)

DeChaine, M.D.; Feltus, M.A.

1996-09-01

The CIGARO fuel management optimization code based on genetic algorithms is described and tested. The test problem optimized the core lifetime for a pressurized water reactor with a penalty function constraint on the peak normalized power. A bit-string genotype encoded the loading patterns, and genotype bias was reduced with additional bits. Expert knowledge about fuel management was incorporated into the genetic algorithm. Regional crossover exchanged physically adjacent fuel assemblies and improved the optimization slightly. Biasing the initial population toward a known priority table significantly improved the optimization.

High-Speed Rapid-Single-Flux-Quantum Multiplexer and Demultiplexer Design and Testing

DTIC Science & Technology

2007-08-22

Herr, N. Vukovic , C. A. Mancini, M. F. Bocko, and M. J . Feldman, "High speed testing of a four-bit RSFQ decimation digital filter," IEEE Trans. Appl...61] A. M. Herr, C. A. Mancini, N. Vukovic , M. F. Bocko, and M. J . Feldman, "High-speed operation of a 64-bit circular shift register," IEEE Trans...10-19 J . A rich library of basic cells such as flip-flops, buffers, adders, multipliers, clock generator circuits, and phase-locking circuits have been

Intelligent pump test system based on virtual instrument

NASA Astrophysics Data System (ADS)

Ma, Jungong; Wang, Shifu; Wang, Zhanlin

2003-09-01

The intelligent pump system is the key component of the aircraft hydraulic system that can solve the problem, such as the temperature sharply increasing. As the performance of the intelligent pump directly determines that of the aircraft hydraulic system and seriously affects fly security and reliability. So it is important to test all kinds of performance parameters of intelligent pump during design and development, while the advanced, reliable and complete test equipments are the necessary instruments for achieving the goal. In this paper, the application of virtual instrument and computer network technology in aircraft intelligent pump test is presented. The composition of the hardware, software, hydraulic circuit in this system are designed and implemented.

Error rate performance of atmospheric laser communication based on bubble model

NASA Astrophysics Data System (ADS)

Xu, Ke; Wang, Jin; Li, Yan

2009-08-01

Free-Space Optics (FSO) can provide an effective line-of-sight and wireless communication with high bandwidth over a short distance. As a promising field of wireless communication, FSO is being accepted as an alternative of the more expensive fiber-optic based solutions. Despite the advantages of FSO, atmospheric turbulence has a significant impact on laser beam propagating through the channel in the atmosphere over a long distance. Turbulent eddies of various size and refractive index result in intensity scintillation and phase wander, which can severely impair the quality of FSO communication system. In this paper, a new geometrical model is used to assess the effects of turbulence on laser beam in its propagation path. The atmosphere is modeled along the transmission path filled with spatial-distributed spherical bubbles. The size and refractive index discontinuity of each bubble is K-distributed. This Monte Carlo technique allows us to estimate the fluctuation of intensity and phase shifts along the path. A pair of uncollimated rays arrives at the receiver through different path, and an optical path difference is produced. This difference causes a delay between the two rays. At the receiver, as the two rays are superposed, the delay ultimately affects the judgement of the bits. In the simulation, we assume that when the delay exceeds half of the bit width, bit error is possible. On the contrary, when the delay is less than the bit width, the bit error will not happen. Based on this assumption, we calculate the BER under different conditions, and results are further analyzed.

A comparison of low IQ scores from the Reynolds Intellectual Assessment Scales and the Wechsler Adult Intelligence Scale-Third Edition.

PubMed

Umphress, Thomas B

2008-06-01

Twenty people with suspected intellectual disability took the Reynolds Intellectual Assessment Scales (RIAS; C. R. Reynolds & R. W. Kamphaus, 1998) and the Wechsler Adult Intelligence Scale-3rd Edition (WAIS-III; D. Wechsler, 1997) to see if the 2 IQ tests produced comparable results. A t test showed that the RIAS Composite Intelligence Index scores were significantly higher than WAIS-III Full Scale IQ scores at the alpha level of .01. There was a significant difference between the RIAS Nonverbal Intelligence and WAIS-III Performance Scale, but there was no significant difference between the RIAS Verbal Intelligence Index and the WAIS-III Verbal Scale IQ. The results raise questions concerning test selection for diagnosing intellectual disability and the use of the correlation statistic for comparing intelligence tests.

The Zone of Potential Development: Implications for Intelligence Testing in the Year 2000. Technical Report No. 128.

ERIC Educational Resources Information Center

Brown, Ann L.; French, Lucia A.

The practice and interpretation of intelligence testing of educable retarded and learning disabled children is examined in this report. The current and future state of intelligence testing is discussed in terms of its predictive, diagnostic, and remedial functions. The first section places a consideration of individual testing formats within a…

The relationship between executive functions and fluid intelligence in Parkinson's disease

PubMed Central

Roca, M.; Manes, F.; Chade, A.; Gleichgerrcht, E.; Gershanik, O.; Arévalo, G. G.; Torralva, T.; Duncan, J.

2012-01-01

Background We recently demonstrated that decline in fluid intelligence is a substantial contributor to frontal deficits. For some classical ‘executive’ tasks, such as the Wisconsin Card Sorting Test (WCST) and Verbal Fluency, frontal deficits were entirely explained by fluid intelligence. However, on a second set of frontal tasks, deficits remained even after statistically controlling for this factor. These tasks included tests of theory of mind and multitasking. As frontal dysfunction is the most frequent cognitive deficit observed in early Parkinson's disease (PD), the present study aimed to determine the role of fluid intelligence in such deficits. Method We assessed patients with PD (n=32) and control subjects (n=22) with the aforementioned frontal tests and with a test of fluid intelligence. Group performance was compared and fluid intelligence was introduced as a covariate to determine its role in frontal deficits shown by PD patients. Results In line with our previous results, scores on the WCST and Verbal Fluency were closely linked to fluid intelligence. Significant patient–control differences were eliminated or at least substantially reduced once fluid intelligence was introduced as a covariate. However, for tasks of theory of mind and multitasking, deficits remained even after fluid intelligence was statistically controlled. Conclusions The present results suggest that clinical assessment of neuropsychological deficits in PD should include tests of fluid intelligence, together with one or more specific tasks that allow for the assessment of residual frontal deficits associated with theory of mind and multitasking. PMID:22440401

Experimental and numerical study of drill bit drop tests on Kuru granite.

PubMed

Fourmeau, Marion; Kane, Alexandre; Hokka, Mikko

2017-01-28

This paper presents an experimental and numerical study of Kuru grey granite impacted with a seven-buttons drill bit mounted on an instrumented drop test machine. The force versus displacement curves during the impact, so-called bit-rock interaction (BRI) curves, were obtained using strain gauge measurements for two levels of impact energy. Moreover, the volume of removed rock after each drop test was evaluated by stereo-lithography (three-dimensional surface reconstruction). A modified version of the Holmquist-Johnson-Cook (MHJC) material model was calibrated using Kuru granite test results available from the literature. Numerical simulations of the single drop tests were carried out using the MHJC model available in the LS-DYNA explicit finite-element solver. The influence of the impact energy and additional confining pressure on the BRI curves and the volume of the removed rock is discussed. In addition, the influence of the rock surface shape before impact was evaluated using two different mesh geometries: a flat surface and a hyperbolic surface. The experimental and numerical results are compared and discussed in terms of drilling efficiency through the mechanical specific energy.This article is part of the themed issue 'Experimental testing and modelling of brittle materials at high strain rates'. © 2016 The Author(s).

The Harvard Beat Assessment Test (H-BAT): a battery for assessing beat perception and production and their dissociation.

PubMed

Fujii, Shinya; Schlaug, Gottfried

2013-01-01

Humans have the abilities to perceive, produce, and synchronize with a musical beat, yet there are widespread individual differences. To investigate these abilities and to determine if a dissociation between beat perception and production exists, we developed the Harvard Beat Assessment Test (H-BAT), a new battery that assesses beat perception and production abilities. H-BAT consists of four subtests: (1) music tapping test (MTT), (2) beat saliency test (BST), (3) beat interval test (BIT), and (4) beat finding and interval test (BFIT). MTT measures the degree of tapping synchronization with the beat of music, whereas BST, BIT, and BFIT measure perception and production thresholds via psychophysical adaptive stair-case methods. We administered the H-BAT on thirty individuals and investigated the performance distribution across these individuals in each subtest. There was a wide distribution in individual abilities to tap in synchrony with the beat of music during the MTT. The degree of synchronization consistency was negatively correlated with thresholds in the BST, BIT, and BFIT: a lower degree of synchronization was associated with higher perception and production thresholds. H-BAT can be a useful tool in determining an individual's ability to perceive and produce a beat within a single session.

The Harvard Beat Assessment Test (H-BAT): a battery for assessing beat perception and production and their dissociation

PubMed Central

Fujii, Shinya; Schlaug, Gottfried

2013-01-01

Humans have the abilities to perceive, produce, and synchronize with a musical beat, yet there are widespread individual differences. To investigate these abilities and to determine if a dissociation between beat perception and production exists, we developed the Harvard Beat Assessment Test (H-BAT), a new battery that assesses beat perception and production abilities. H-BAT consists of four subtests: (1) music tapping test (MTT), (2) beat saliency test (BST), (3) beat interval test (BIT), and (4) beat finding and interval test (BFIT). MTT measures the degree of tapping synchronization with the beat of music, whereas BST, BIT, and BFIT measure perception and production thresholds via psychophysical adaptive stair-case methods. We administered the H-BAT on thirty individuals and investigated the performance distribution across these individuals in each subtest. There was a wide distribution in individual abilities to tap in synchrony with the beat of music during the MTT. The degree of synchronization consistency was negatively correlated with thresholds in the BST, BIT, and BFIT: a lower degree of synchronization was associated with higher perception and production thresholds. H-BAT can be a useful tool in determining an individual's ability to perceive and produce a beat within a single session. PMID:24324421

From the Binet-Simon to the Wechsler-Bellevue: tracing the history of intelligence testing.

PubMed

Boake, Corwin

2002-05-01

The history of David Wechsler's intelligence scales is reviewed by tracing the origins of the subtests in the 1939 Wechsler-Bellevue Intelligence Scale. The subtests originated from tests developed between 1880 and World War I, and was based on approaches to mental testing including anthropometrics, association psychology, the Binet-Simon scales, language-free performance testing of immigrants and school children, and group testing of military recruits. Wechsler's subtest selection can be understood partly from his clinical experiences during World War I. The structure of the Wechsler-Bellevue Scale, which introduced major innovations in intelligence testing, has remained almost unchanged through later revisions.

Intelligence and Law Enforcement: Countering Transnational Threats to the U.S.

DTIC Science & Technology

2001-12-03

K. Johnson, America’s Secret Power: the CIA in a Democratic Society (New York: Oxford University Press , 1989), pp. 133-203. 26 The history of the...gathering on civilians by the military is found in Joan M. Jensen, Army Surveillance in America, 1775-1980 (New Haven: Yale University Press , 1991). 27...103rd Congress, 1st session, Select Committee on Intelligence, The Intelligence Community’s Involvement in the Banca Nazionale del Lavoro (BNL

Artificial Intelligence and Its Use in Cost Type analyses with an Example in Cost Performance Measurement.

DTIC Science & Technology

1985-01-01

7-Ai6i 817 ARTIFICIAL INTELLIGENCE AND ITS USE IN COST TYE1/I ANALYSES WdITH ANt EXAMPLE IN COST PERFORMANCE I MERSUREMENT(U) DEFENSE SYSTEMS...INTELLIGENCE-THE EMERGING TECHNOLOGY/ NATURAL LANGUAGE PROCESSORS K ~ With the advent of ARTIFICAL INTELLEGENCE (AI), we are entering into a new era of...language processor which is commerically available is INTELLECT, by Artifical Intellegence Incorporated, Waltham, Mass. To illustrate what a natural

The Role of Fixation and Visual Attention in Object Recognition.

DTIC Science & Technology

1995-01-01

computers", Technical Report, Aritificial Intelligence Lab, M.I. T., AI-Memo-915, June 1986. [29] D.P. Huttenlocher and S.Ullman, "Object Recognition Using...attention", Technical Report, Aritificial Intelligence Lab, M.I. T., AI-memo-770, Jan 1984. [35] E.Krotkov, K. Henriksen and R. Kories, "Stereo...MIT Artificial Intelligence Laboratory [ PCTBTBimON STATEMENT X \\ Afipioved tor puciic reieo*«* \\ »?*•;.., jDi*tiibutK» U»lisut»d* 19951004

Using an intelligent system to aid in tephra layer correlation of the tephra beds of the Mono-Inyo Craters, California

NASA Astrophysics Data System (ADS)

Hanson-Hedgecock, S.; Bursik, M.; Rogova, G.

2008-12-01

We are developing an intelligent system to correlate tephra layers by using the lithologic and geochemical characteristics of field samples, to aid geologists in interpreting eruption patterns in volcanic fields. Understanding the eruption history of a volcanic field from stratigraphic studies is important for forecasting future eruptive behavior and hazards. The intelligent system is used to define groups of tephra source vents and to correlate tephra layers based on a combination of geochemical data and lithostratigraphic characteristics. The tephra beds of the Mono-Inyo Craters, California, are used to test the ability of the intelligent system for tephra layer correlation. The data processing is performed by a suite of both unsupervised and supervised classifiers, built and combined within the framework of the Dempster-Shafer theory of evidence. We have developed algorithms to calculate isopleth maps of thickness, lithic and pumice size that are used in the processing of the lithostratigraphic data. This spatial information is important in the determination of eruption patterns and is used by an evidential nearest neighbor classifier to correlate tephra layers. Integrating a better isopleth approximation function and expert knowledge about stratigraphic order of the tephra layers into the classifier improves the lithostratigraphic correlation from 56% to 87% of layers correctly identified. Geochemical data for defining groups of tephra sources are processed by a suit of fuzzy k-means classifiers. Improved clustering results of geochemical data are achieved by the fusion of individual clustering results with an evidential combination method. The intelligent system aids correlation by showing matches and disparities between data patterns from different outcrops that may have been overlooked. The intelligent system produces a useful recognition result, while dealing with the uncertainty from sparse data and the imprecise description of layer characteristics.

Observer detection of image degradation caused by irreversible data compression processes

NASA Astrophysics Data System (ADS)

Chen, Ji; Flynn, Michael J.; Gross, Barry; Spizarny, David

1991-05-01

Irreversible data compression methods have been proposed to reduce the data storage and communication requirements of digital imaging systems. In general, the error produced by compression increases as an algorithm''s compression ratio is increased. We have studied the relationship between compression ratios and the detection of induced error using radiologic observers. The nature of the errors was characterized by calculating the power spectrum of the difference image. In contrast with studies designed to test whether detected errors alter diagnostic decisions, this study was designed to test whether observers could detect the induced error. A paired-film observer study was designed to test whether induced errors were detected. The study was conducted with chest radiographs selected and ranked for subtle evidence of interstitial disease, pulmonary nodules, or pneumothoraces. Images were digitized at 86 microns (4K X 5K) and 2K X 2K regions were extracted. A full-frame discrete cosine transform method was used to compress images at ratios varying between 6:1 and 60:1. The decompressed images were reprinted next to the original images in a randomized order with a laser film printer. The use of a film digitizer and a film printer which can reproduce all of the contrast and detail in the original radiograph makes the results of this study insensitive to instrument performance and primarily dependent on radiographic image quality. The results of this study define conditions for which errors associated with irreversible compression cannot be detected by radiologic observers. The results indicate that an observer can detect the errors introduced by this compression algorithm for compression ratios of 10:1 (1.2 bits/pixel) or higher.

A CMOS IC-based multisite measuring system for stimulation and recording in neural preparations in vitro

PubMed Central

Tateno, Takashi; Nishikawa, Jun

2014-01-01

In this report, we describe the system integration of a complementary metal oxide semiconductor (CMOS) integrated circuit (IC) chip, capable of both stimulation and recording of neurons or neural tissues, to investigate electrical signal propagation within cellular networks in vitro. The overall system consisted of three major subunits: a 5.0 × 5.0 mm CMOS IC chip, a reconfigurable logic device (field-programmable gate array, FPGA), and a PC. To test the system, microelectrode arrays (MEAs) were used to extracellularly measure the activity of cultured rat cortical neurons and mouse cortical slices. The MEA had 64 bidirectional (stimulation and recording) electrodes. In addition, the CMOS IC chip was equipped with dedicated analog filters, amplification stages, and a stimulation buffer. Signals from the electrodes were sampled at 15.6 kHz with 16-bit resolution. The measured input-referred circuitry noise was 10.1 μ V root mean square (10 Hz to 100 kHz), which allowed reliable detection of neural signals ranging from several millivolts down to approximately 33 μ Vpp. Experiments were performed involving the stimulation of neurons with several spatiotemporal patterns and the recording of the triggered activity. An advantage over current MEAs, as demonstrated by our experiments, includes the ability to stimulate (voltage stimulation, 5-bit resolution) spatiotemporal patterns in arbitrary subsets of electrodes. Furthermore, the fast stimulation reset mechanism allowed us to record neuronal signals from a stimulating electrode around 3 ms after stimulation. We demonstrate that the system can be directly applied to, for example, auditory neural prostheses in conjunction with an acoustic sensor and a sound processing system. PMID:25346683

A CMOS IC-based multisite measuring system for stimulation and recording in neural preparations in vitro.

PubMed

Tateno, Takashi; Nishikawa, Jun

2014-01-01

In this report, we describe the system integration of a complementary metal oxide semiconductor (CMOS) integrated circuit (IC) chip, capable of both stimulation and recording of neurons or neural tissues, to investigate electrical signal propagation within cellular networks in vitro. The overall system consisted of three major subunits: a 5.0 × 5.0 mm CMOS IC chip, a reconfigurable logic device (field-programmable gate array, FPGA), and a PC. To test the system, microelectrode arrays (MEAs) were used to extracellularly measure the activity of cultured rat cortical neurons and mouse cortical slices. The MEA had 64 bidirectional (stimulation and recording) electrodes. In addition, the CMOS IC chip was equipped with dedicated analog filters, amplification stages, and a stimulation buffer. Signals from the electrodes were sampled at 15.6 kHz with 16-bit resolution. The measured input-referred circuitry noise was 10.1 μ V root mean square (10 Hz to 100 kHz), which allowed reliable detection of neural signals ranging from several millivolts down to approximately 33 μ Vpp. Experiments were performed involving the stimulation of neurons with several spatiotemporal patterns and the recording of the triggered activity. An advantage over current MEAs, as demonstrated by our experiments, includes the ability to stimulate (voltage stimulation, 5-bit resolution) spatiotemporal patterns in arbitrary subsets of electrodes. Furthermore, the fast stimulation reset mechanism allowed us to record neuronal signals from a stimulating electrode around 3 ms after stimulation. We demonstrate that the system can be directly applied to, for example, auditory neural prostheses in conjunction with an acoustic sensor and a sound processing system.

Successful intelligence: finding a balance.

PubMed

Sternberg

1999-11-01

Human intelligence has long been on the borderline between a scientific and a quasi-scientific field within the scope of psychological science. This is partially because its study and measurement have been particularly susceptible to socio-political agendas, but also because empirical tests of theories of intelligence have too often ranged from inadequate to nonexistent. In this article it is argued that two extremes have prevailed in the study of intelligence. At one extreme are general-ability (g) theorists, who have collected large amounts of data to test the theory of general intelligence, but often using restricted ranges of participants, materials or situational contexts. They also show a tendency to limit their methods of data analysis (e.g. to exploratory factor analysis). At another extreme are theorists arguing for new, multiple intelligences, whose theories have been subjected to few or no empirical tests. I argue that a middle ground is needed that recognizes the multifarious nature of intelligence and of people's conceptions of it, but that also is subjected to rigorous empirical tests.

Application of intelligent sensors in the integrated systems health monitoring of a rocket test stand

NASA Astrophysics Data System (ADS)

Mahajan, Ajay; Chitikeshi, Sanjeevi; Utterbach, Lucas; Bandhil, Pavan; Figueroa, Fernando

2006-05-01

This paper describes the application of intelligent sensors in the Integrated Systems Health Monitoring (ISHM) as applied to a rocket test stand. The development of intelligent sensors is attempted as an integrated system approach, i.e. one treats the sensors as a complete system with its own physical transducer, A/D converters, processing and storage capabilities, software drivers, self-assessment algorithms, communication protocols and evolutionary methodologies that allow them to get better with time. Under a project being undertaken at the NASA Stennis Space Center, an integrated framework is being developed for the intelligent monitoring of smart elements associated with the rocket tests stands. These smart elements can be sensors, actuators or other devices. Though the immediate application is the monitoring of the rocket test stands, the technology should be generally applicable to the ISHM vision. This paper outlines progress made in the development of intelligent sensors by describing the work done till date on Physical Intelligent sensors (PIS) and Virtual Intelligent Sensors (VIS).

76 FR 27377 - Additional Identifying Information Associated With Persons Whose Property and Interests in...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-11

... REVOLUTIONARY GUARD CORPS (IRGC)-QODS FORCE (a.k.a. PASDARAN-E ENGHELAB-E ISLAMI (PASDARAN); a.k.a. SEPAH-E QODS (JERUSALEM FORCE)) [SDGT] [SYRIA] [IRGC.] 2. SYRIAN GENERAL INTELLIGENCE DIRECTORATE (a.k.a. IDERAT AL-AMN AL...

Test or toy? Materiality and the measurement of infant intelligence.

PubMed

Young, Jacy L

2015-05-01

Adopting a material culture perspective, this article interrogates the composition of the copy of the Cattell Infant Intelligence Scale housed at the University of Toronto Scientific Instruments Collection. As a deliberately assembled collection of toys, the Cattell Scale makes clear the indefinite boundary between test and toy in 20th-century American psychology. Consideration of the current condition of some of the material constituents of this particular Cattell Scale provides valuable insight into some of the elusive practices of intelligence testers in situ and highlights the dynamic nature of the testing process. At the same time, attending to the materiality of this intelligence test reveals some of the more general assumptions about the nature of intelligence inherent in tests for young children. The scale and others like it, I argue, exposes psychologists' often-uncritical equation of childhood intelligence with appropriate play undertaken with an appropriate toy, an approach complicit in, and fostered by, midcentury efforts to cultivate particular forms of selfhood. This analysis serves as an example of the kind of work that may be done on the history of intelligence testing when the material objects that were (and are) inherently a part of the testing process are included in historical scholarship. (c) 2015 APA, all rights reserved).

Development of the Russian matrix sentence test.

PubMed

Warzybok, Anna; Zokoll, Melanie; Wardenga, Nina; Ozimek, Edward; Boboshko, Maria; Kollmeier, Birger

2015-01-01

To develop the Russian matrix sentence test for speech intelligibility measurements in noise. Test development included recordings, optimization of speech material, and evaluation to investigate the equivalency of the test lists and training. For each of the 500 test items, the speech intelligibility function, speech reception threshold (SRT: signal-to-noise ratio, SNR, that provides 50% speech intelligibility), and slope was obtained. The speech material was homogenized by applying level corrections. In evaluation measurements, speech intelligibility was measured at two fixed SNRs to compare list-specific intelligibility functions. To investigate the training effect and establish reference data, speech intelligibility was measured adaptively. Overall, 77 normal-hearing native Russian listeners. The optimization procedure decreased the spread in SRTs across words from 2.8 to 0.6 dB. Evaluation measurements confirmed that the 16 test lists were equivalent, with a mean SRT of -9.5 ± 0.2 dB and a slope of 13.8 ± 1.6%/dB. The reference SRT, -8.8 ± 0.8 dB for the open-set and -9.4 ± 0.8 dB for the closed-set format, increased slightly for noise levels above 75 dB SPL. The Russian matrix sentence test is suitable for accurate and reliable speech intelligibility measurements in noise.

Negligible Sex Differences in General Intelligence.

ERIC Educational Resources Information Center

Colom, Roberto; Juan-Espinosa, Manuel; Abad, Francisco; Garcia, Luis F.

2000-01-01

Studied sex differences in general intelligence in 10,475 adults taking cognitive test batteries. Results suggest a negligible difference in general intelligence, a finding consistent with findings from quite different test batteries and subject samples. (SLD)

Performance Analysis of IEEE 802.11g Waveform Transmitted Over a Fading Channel with Pulse-Noise Interference

DTIC Science & Technology

2006-06-01

called packet binary convolutional code (PBCC), was included as an option for performance at rate of either 5.5 or 11 Mpbs. The second offshoot...and the code rate is r k n= . A general convolutional encoder can be implemented with k shift-registers and n modulo-2 adders. Higher rates can be...derived from lower rate codes by employing “ puncturing .” Puncturing is a procedure for omitting some of the encoded bits in the transmitter (thus

A measurement model of multiple intelligence profiles of management graduates

NASA Astrophysics Data System (ADS)

Krishnan, Heamalatha; Awang, Siti Rahmah

2017-05-01

In this study, developing a fit measurement model and identifying the best fitting items to represent Howard Gardner's nine intelligences namely, musical intelligence, bodily-kinaesthetic intelligence, mathematical/logical intelligence, visual/spatial intelligence, verbal/linguistic intelligence, interpersonal intelligence, intrapersonal intelligence, naturalist intelligence and spiritual intelligence are the main interest in order to enhance the opportunities of the management graduates for employability. In order to develop a fit measurement model, Structural Equation Modeling (SEM) was applied. A psychometric test which is the Ability Test in Employment (ATIEm) was used as the instrument to measure the existence of nine types of intelligence of 137 University Teknikal Malaysia Melaka (UTeM) management graduates for job placement purposes. The initial measurement model contains nine unobserved variables and each unobserved variable is measured by ten observed variables. Finally, the modified measurement model deemed to improve the Normed chi-square (NC) = 1.331; Incremental Fit Index (IFI) = 0.940 and Root Mean Square of Approximation (RMSEA) = 0.049 was developed. The findings showed that the UTeM management graduates possessed all nine intelligences either high or low. Musical intelligence, mathematical/logical intelligence, naturalist intelligence and spiritual intelligence contributed highest loadings on certain items. However, most of the intelligences such as bodily kinaesthetic intelligence, visual/spatial intelligence, verbal/linguistic intelligence interpersonal intelligence and intrapersonal intelligence possessed by UTeM management graduates are just at the borderline.

Micro-mechanical resonators for dynamically reconfigurable reduced voltage logic gates

NASA Astrophysics Data System (ADS)

Chappanda, K. N.; Ilyas, S.; Younis, M. I.

2018-05-01

Due to the limitations of transistor-based logic devices such as their poor performance at elevated temperature, alternative computing methods are being actively investigated. In this work, we present electromechanical logic gates using electrostatically coupled in-plane micro-cantilever resonators operated at modest vacuum conditions of 5 Torr. Operating in the first resonant mode, we demonstrate 2-bit XOR, 2- and 3-bit AND, 2- and 3-bit NOR, and 1-bit NOT gates; all condensed in the same device. Through the designed electrostatic coupling, the required voltage for the logic gates is reduced by 80%, along with the reduction in the number of electrical interconnects and devices per logic operation (contrary to transistors). The device is dynamically reconfigurable between any logic gates in real time without the need for any change in the electrical interconnects and the drive circuit. By operating in the first two resonant vibration modes, we demonstrate mechanical logic gates consisting of two 2-bit AND and two 2-bit XOR gates. The device is tested at elevated temperatures and is shown to be functional as a logic gate up to 150 °C. Also, the device has high reliability with demonstrated lifetime greater than 5  ×  1012 oscillations.

Decision-making conflict and the neural efficiency hypothesis of intelligence: a functional near-infrared spectroscopy investigation.

PubMed

Di Domenico, Stefano I; Rodrigo, Achala H; Ayaz, Hasan; Fournier, Marc A; Ruocco, Anthony C

2015-04-01

Research on the neural efficiency hypothesis of intelligence (NEH) has revealed that the brains of more intelligent individuals consume less energy when performing easy cognitive tasks but more energy when engaged in difficult mental operations. However, previous studies testing the NEH have relied on cognitive tasks that closely resemble psychometric tests of intelligence, potentially confounding efficiency during intelligence-test performance with neural efficiency per se. The present study sought to provide a novel test of the NEH by examining patterns of prefrontal activity while participants completed an experimental paradigm that is qualitatively distinct from the contents of psychometric tests of intelligence. Specifically, participants completed a personal decision-making task (e.g., which occupation would you prefer, dancer or chemist?) in which they made a series of forced choices according to their subjective preferences. The degree of decisional conflict (i.e., choice difficulty) between the available response options was manipulated on the basis of participants' unique preference ratings for the target stimuli, which were obtained prior to scanning. Evoked oxygenation of the prefrontal cortex was measured using 16-channel continuous-wave functional near-infrared spectroscopy. Consistent with the NEH, intelligence predicted decreased activation of the right inferior frontal gyrus (IFG) during low-conflict situations and increased activation of the right-IFG during high-conflict situations. This pattern of right-IFG activity among more intelligent individuals was complemented by faster reaction times in high-conflict situations. These results provide new support for the NEH and suggest that the neural efficiency of more intelligent individuals generalizes to the performance of cognitive tasks that are distinct from intelligence tests. Copyright © 2015 Elsevier Inc. All rights reserved.

A reconfigurable cryogenic platform for the classical control of quantum processors

NASA Astrophysics Data System (ADS)

Homulle, Harald; Visser, Stefan; Patra, Bishnu; Ferrari, Giorgio; Prati, Enrico; Sebastiano, Fabio; Charbon, Edoardo

2017-04-01

The implementation of a classical control infrastructure for large-scale quantum computers is challenging due to the need for integration and processing time, which is constrained by coherence time. We propose a cryogenic reconfigurable platform as the heart of the control infrastructure implementing the digital error-correction control loop. The platform is implemented on a field-programmable gate array (FPGA) that supports the functionality required by several qubit technologies and that can operate close to the physical qubits over a temperature range from 4 K to 300 K. This work focuses on the extensive characterization of the electronic platform over this temperature range. All major FPGA building blocks (such as look-up tables (LUTs), carry chains (CARRY4), mixed-mode clock manager (MMCM), phase-locked loop (PLL), block random access memory, and IDELAY2 (programmable delay element)) operate correctly and the logic speed is very stable. The logic speed of LUTs and CARRY4 changes less then 5%, whereas the jitter of MMCM and PLL clock managers is reduced by 20%. The stability is finally demonstrated by operating an integrated 1.2 GSa/s analog-to-digital converter (ADC) with a relatively stable performance over temperature. The ADCs effective number of bits drops from 6 to 4.5 bits when operating at 15 K.

A reconfigurable cryogenic platform for the classical control of quantum processors.

PubMed

Homulle, Harald; Visser, Stefan; Patra, Bishnu; Ferrari, Giorgio; Prati, Enrico; Sebastiano, Fabio; Charbon, Edoardo

2017-04-01

The implementation of a classical control infrastructure for large-scale quantum computers is challenging due to the need for integration and processing time, which is constrained by coherence time. We propose a cryogenic reconfigurable platform as the heart of the control infrastructure implementing the digital error-correction control loop. The platform is implemented on a field-programmable gate array (FPGA) that supports the functionality required by several qubit technologies and that can operate close to the physical qubits over a temperature range from 4 K to 300 K. This work focuses on the extensive characterization of the electronic platform over this temperature range. All major FPGA building blocks (such as look-up tables (LUTs), carry chains (CARRY4), mixed-mode clock manager (MMCM), phase-locked loop (PLL), block random access memory, and IDELAY2 (programmable delay element)) operate correctly and the logic speed is very stable. The logic speed of LUTs and CARRY4 changes less then 5%, whereas the jitter of MMCM and PLL clock managers is reduced by 20%. The stability is finally demonstrated by operating an integrated 1.2 GSa/s analog-to-digital converter (ADC) with a relatively stable performance over temperature. The ADCs effective number of bits drops from 6 to 4.5 bits when operating at 15 K.

Error control techniques for satellite and space communications

NASA Technical Reports Server (NTRS)

Costello, Daniel J., Jr.

1994-01-01

The unequal error protection capabilities of convolutional and trellis codes are studied. In certain environments, a discrepancy in the amount of error protection placed on different information bits is desirable. Examples of environments which have data of varying importance are a number of speech coding algorithms, packet switched networks, multi-user systems, embedded coding systems, and high definition television. Encoders which provide more than one level of error protection to information bits are called unequal error protection (UEP) codes. In this work, the effective free distance vector, d, is defined as an alternative to the free distance as a primary performance parameter for UEP convolutional and trellis encoders. For a given (n, k), convolutional encoder, G, the effective free distance vector is defined as the k-dimensional vector d = (d(sub 0), d(sub 1), ..., d(sub k-1)), where d(sub j), the j(exp th) effective free distance, is the lowest Hamming weight among all code sequences that are generated by input sequences with at least one '1' in the j(exp th) position. It is shown that, although the free distance for a code is unique to the code and independent of the encoder realization, the effective distance vector is dependent on the encoder realization.

The Tests Are Written for the Dogs: "The Journal of Negro Education", African American Children, and the Intelligence Testing Movement in Historical Perspective

ERIC Educational Resources Information Center

Franklin, V. P.

2007-01-01

Since its founding in April 1932, "The Journal of Negro Education" has published articles, reports, and reviews examining the results of intelligence and other mental tests given to African Americans. In these studies, historically social scientists contributing to the "JNE" sought to clarify what these intelligence tests were…

Test Review: Reynolds, C. R., & Kamphaus, R. W. (2003). "RIAS--Reynolds Intellectual Assessment Scales." Lutz, FL--Psychological Assessment Resources, Inc.

ERIC Educational Resources Information Center

Dombrowski, Stefan C.; Mrazik, Martin

2008-01-01

In this article, the authors review the Reynolds Intellectual Assessment Scales (RIAS; Reynolds & Kamphaus, 2003), an individually administered test of intelligence for use with individuals between the ages of 3 and 94. The RIAS represents the newest intelligence test on the marketplace and incorporates the most current intelligence test theory…

Intelligence, IQ, Tests, and Assessments: What Do Parents Need to Know? What Should They Tell Their Kids?

ERIC Educational Resources Information Center

Matthews, Dona; Foster, Joanne

2014-01-01

Embarking on the standardized testing process often leads parents of gifted children to other questions about intelligence, tests, and assessment practices. What is intelligence? Do IQ tests measure it? Are there better ways of deciding who needs gifted programming? What can parents request by way of results and their interpretation? Should…

Perceived intelligence is associated with measured intelligence in men but not women.

PubMed

Kleisner, Karel; Chvátalová, Veronika; Flegr, Jaroslav

2014-01-01

The ability to accurately assess the intelligence of other persons finds its place in everyday social interaction and should have important evolutionary consequences. We used static facial photographs of 40 men and 40 women to test the relationship between measured IQ, perceived intelligence, and facial shape. Both men and women were able to accurately evaluate the intelligence of men by viewing facial photographs. In addition to general intelligence, figural and fluid intelligence showed a significant relationship with perceived intelligence, but again, only in men. No relationship between perceived intelligence and IQ was found for women. We used geometric morphometrics to determine which facial traits are associated with the perception of intelligence, as well as with intelligence as measured by IQ testing. Faces that are perceived as highly intelligent are rather prolonged with a broader distance between the eyes, a larger nose, a slight upturn to the corners of the mouth, and a sharper, pointing, less rounded chin. By contrast, the perception of lower intelligence is associated with broader, more rounded faces with eyes closer to each other, a shorter nose, declining corners of the mouth, and a rounded and massive chin. By contrast, we found no correlation between morphological traits and real intelligence measured with IQ test, either in men or women. These results suggest that a perceiver can accurately gauge the real intelligence of men, but not women, by viewing their faces in photographs; however, this estimation is possibly not based on facial shape. Our study revealed no relation between intelligence and either attractiveness or face shape.

Perceived Intelligence Is Associated with Measured Intelligence in Men but Not Women

PubMed Central

Kleisner, Karel; Chvátalová, Veronika; Flegr, Jaroslav

2014-01-01

Background The ability to accurately assess the intelligence of other persons finds its place in everyday social interaction and should have important evolutionary consequences. Methodology/Principal Findings We used static facial photographs of 40 men and 40 women to test the relationship between measured IQ, perceived intelligence, and facial shape. Both men and women were able to accurately evaluate the intelligence of men by viewing facial photographs. In addition to general intelligence, figural and fluid intelligence showed a significant relationship with perceived intelligence, but again, only in men. No relationship between perceived intelligence and IQ was found for women. We used geometric morphometrics to determine which facial traits are associated with the perception of intelligence, as well as with intelligence as measured by IQ testing. Faces that are perceived as highly intelligent are rather prolonged with a broader distance between the eyes, a larger nose, a slight upturn to the corners of the mouth, and a sharper, pointing, less rounded chin. By contrast, the perception of lower intelligence is associated with broader, more rounded faces with eyes closer to each other, a shorter nose, declining corners of the mouth, and a rounded and massive chin. By contrast, we found no correlation between morphological traits and real intelligence measured with IQ test, either in men or women. Conclusions These results suggest that a perceiver can accurately gauge the real intelligence of men, but not women, by viewing their faces in photographs; however, this estimation is possibly not based on facial shape. Our study revealed no relation between intelligence and either attractiveness or face shape. PMID:24651120

Modeling river total bed material load discharge using artificial intelligence approaches (based on conceptual inputs)

NASA Astrophysics Data System (ADS)

Roushangar, Kiyoumars; Mehrabani, Fatemeh Vojoudi; Shiri, Jalal

2014-06-01

This study presents Artificial Intelligence (AI)-based modeling of total bed material load through developing the accuracy level of the predictions of traditional models. Gene expression programming (GEP) and adaptive neuro-fuzzy inference system (ANFIS)-based models were developed and validated for estimations. Sediment data from Qotur River (Northwestern Iran) were used for developing and validation of the applied techniques. In order to assess the applied techniques in relation to traditional models, stream power-based and shear stress-based physical models were also applied in the studied case. The obtained results reveal that developed AI-based models using minimum number of dominant factors, give more accurate results than the other applied models. Nonetheless, it was revealed that k-fold test is a practical but high-cost technique for complete scanning of applied data and avoiding the over-fitting.

Mars Science Laboratory Drill

NASA Technical Reports Server (NTRS)

Okon, Avi B.

2010-01-01

The Drill for the Mars Science Laboratory mission is a rotary-percussive sample acquisition device with an emphasis on toughness and robustness to handle the harsh environment on Mars. The unique challenges associated with autonomous drilling from a mobile robot are addressed. A highly compressed development schedule dictated a modular design architecture that satisfies the functional and load requirements while allowing independent development and testing of the Drill subassemblies. The Drill consists of four actuated mechanisms: a spindle that rotates the bit, a chuck that releases and engages bits, a novel voice-coil-based percussion mechanism that hammers the bit, and a linear translation mechanism. The Drill has three passive mechanisms: a replaceable bit assembly that acquires and collects sample, a contact sensor / stabilizer mechanism, and, lastly a flex harness service loop. This paper describes the various mechanisms that makeup the Drill and discusses the solutions to their unique design and development challenges.

A Bit Stream Scalable Speech/Audio Coder Combining Enhanced Regular Pulse Excitation and Parametric Coding

NASA Astrophysics Data System (ADS)

Riera-Palou, Felip; den Brinker, Albertus C.

2007-12-01

This paper introduces a new audio and speech broadband coding technique based on the combination of a pulse excitation coder and a standardized parametric coder, namely, MPEG-4 high-quality parametric coder. After presenting a series of enhancements to regular pulse excitation (RPE) to make it suitable for the modeling of broadband signals, it is shown how pulse and parametric codings complement each other and how they can be merged to yield a layered bit stream scalable coder able to operate at different points in the quality bit rate plane. The performance of the proposed coder is evaluated in a listening test. The major result is that the extra functionality of the bit stream scalability does not come at the price of a reduced performance since the coder is competitive with standardized coders (MP3, AAC, SSC).

Pulsed thrust measurements using electromagnetic calibration techniques

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tang Haibin; Shi Chenbo; Zhang Xin'ai

2011-03-15

A thrust stand for accurately measuring impulse bits, which ranged from 10-1000 {mu}N s using a noncontact electromagnetic calibration technique is described. In particular, a permanent magnet structure was designed to produce a uniform magnetic field, and a multiturn coil was made to produce a calibration force less than 10 mN. The electromagnetic calibration force for pulsed thrust measurements was linear to the coil current and changed less than 2.5% when the distance between the coil and magnet changed 6 mm. A pulsed plasma thruster was first tested on the thrust stand, and afterward five single impulse bits were measuredmore » to give a 310 {mu}N s average impulse bit. Uncertainty of the measured impulse bit was analyzed to evaluate the quality of the measurement and was found to be 10 {mu}N s with 95% credibility.« less

Energy-Efficient Wide Datapath Integer Arithmetic Logic Units Using Superconductor Logic

NASA Astrophysics Data System (ADS)

Ayala, Christopher Lawrence

Complementary Metal-Oxide-Semiconductor (CMOS) technology is currently the most widely used integrated circuit technology today. As CMOS approaches the physical limitations of scaling, it is unclear whether or not it can provide long-term support for niche areas such as high-performance computing and telecommunication infrastructure, particularly with the emergence of cloud computing. Alternatively, superconductor technologies based on Josephson junction (JJ) switching elements such as Rapid Single Flux Quantum (RSFQ) logic and especially its new variant, Energy-Efficient Rapid Single Flux Quantum (ERSFQ) logic have the capability to provide an ultra-high-speed, low power platform for digital systems. The objective of this research is to design and evaluate energy-efficient, high-speed 32-bit integer Arithmetic Logic Units (ALUs) implemented using RSFQ and ERSFQ logic as the first steps towards achieving practical Very-Large-Scale-Integration (VLSI) complexity in digital superconductor electronics. First, a tunable VHDL superconductor cell library is created to provide a mechanism to conduct design exploration and evaluation of superconductor digital circuits from the perspectives of functionality, complexity, performance, and energy-efficiency. Second, hybrid wave-pipelining techniques developed earlier for wide datapath RSFQ designs have been used for efficient arithmetic and logic circuit implementations. To develop the core foundation of the ALU, the ripple-carry adder and the Kogge-Stone parallel prefix carry look-ahead adder are studied as representative candidates on opposite ends of the design spectrum. By combining the high-performance features of the Kogge-Stone structure and the low complexity of the ripple-carry adder, a 32-bit asynchronous wave-pipelined hybrid sparse-tree ALU has been designed and evaluated using the VHDL cell library tuned to HYPRES' gate-level characteristics. The designs and techniques from this research have been implemented using RSFQ logic and prototype chips have been fabricated. As a joint work with HYPRES, a 20 GHz 8-bit Kogge-Stone ALU consisting of 7,950 JJs total has been fabricated using a 1.5 μm 4.5 kA/cm2 process and fully demonstrated. An 8-bit sparse-tree ALU (8,832 JJs total) and a 16-bit sparse-tree adder (12,785 JJs total) have also been fabricated using a 1.0 μm 10 kA/cm 2 process and demonstrated under collaboration with Yokohama National University and Nagoya University (Japan).

Comparison and statistical analysis of four write stability metrics in bulk CMOS static random access memory cells

NASA Astrophysics Data System (ADS)

Qiu, Hao; Mizutani, Tomoko; Saraya, Takuya; Hiramoto, Toshiro

2015-04-01

The commonly used four metrics for write stability were measured and compared based on the same set of 2048 (2k) six-transistor (6T) static random access memory (SRAM) cells by the 65 nm bulk technology. The preferred one should be effective for yield estimation and help predict edge of stability. Results have demonstrated that all metrics share the same worst SRAM cell. On the other hand, compared to butterfly curve with non-normality and write N-curve where no cell state flip happens, bit-line and word-line margins have good normality as well as almost perfect correlation. As a result, both bit line method and word line method prove themselves preferred write stability metrics.

High-resolution LCOS microdisplay with sub-kHz frame rate for high performance, high precision 3D sensor

NASA Astrophysics Data System (ADS)

Lazarev, Grigory; Bonifer, Stefanie; Engel, Philip; Höhne, Daniel; Notni, Gunther

2017-06-01

We report about the implementation of the liquid crystal on silicon (LCOS) microdisplay with 1920 by 1080 resolution and 720 Hz frame rate. The driving solution is FPGA-based. The input signal is converted from the ultrahigh-resolution HDMI 2.0 signal into HD frames, which follow with the specified 720 Hz frame rate. Alternatively the signal is generated directly on the FPGA with built-in pattern generator. The display is showing switching times below 1.5 ms for the selected working temperature. The bit depth of the addressed image achieves 8 bit within each frame. The microdisplay is used in the fringe projection-based 3D sensing system, implemented by Fraunhofer IOF.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sen, Satyabrata; Rao, Nageswara S; Wu, Qishi

There have been increasingly large deployments of radiation detection networks that require computationally fast algorithms to produce prompt results over ad-hoc sub-networks of mobile devices, such as smart-phones. These algorithms are in sharp contrast to complex network algorithms that necessitate all measurements to be sent to powerful central servers. In this work, at individual sensors, we employ Wald-statistic based detection algorithms which are computationally very fast, and are implemented as one of three Z-tests and four chi-square tests. At fusion center, we apply the K-out-of-N fusion to combine the sensors hard decisions. We characterize the performance of detection methods bymore » deriving analytical expressions for the distributions of underlying test statistics, and by analyzing the fusion performances in terms of K, N, and the false-alarm rates of individual detectors. We experimentally validate our methods using measurements from indoor and outdoor characterization tests of the Intelligence Radiation Sensors Systems (IRSS) program. In particular, utilizing the outdoor measurements, we construct two important real-life scenarios, boundary surveillance and portal monitoring, and present the results of our algorithms.« less

The Role of Sentence Position, Allomorph, and Morpheme Type on Accurate Use of s-Related Morphemes by Children Who Are Hard of Hearing

PubMed Central

Koehlinger, Keegan; Oleson, Jacob; McCreery, Ryan; Moeller, Mary Pat

2015-01-01

Purpose Production accuracy of s-related morphemes was examined in 3-year-olds with mild-to-severe hearing loss, focusing on perceptibility, articulation, and input frequency. Method Morphemes with /s/, /z/, and /ɪz/ as allomorphs (plural, possessive, third-person singular –s, and auxiliary and copula “is”) were analyzed from language samples gathered from 51 children (ages: 2;10 [years;months] to 3;8) who are hard of hearing (HH), all of whom used amplification. Articulation was assessed via the Goldman-Fristoe Test of Articulation–Second Edition, and monomorphemic word final /s/ and /z/ production. Hearing was measured via better ear pure tone average, unaided Speech Intelligibility Index, and aided sensation level of speech at 4 kHz. Results Unlike results reported for children with normal hearing, the group of children who are HH correctly produced the /ɪz/ allomorph more than /s/ and /z/ allomorphs. Relative accuracy levels for morphemes and sentence positions paralleled those of children with normal hearing. The 4-kHz sensation level scores (but not the better ear pure tone average or Speech Intelligibility Index), the Goldman-Fristoe Test of Articulation–Second Edition, and word final s/z use all predicted accuracy. Conclusions Both better hearing and higher articulation scores are associated with improved morpheme production, and better aided audibility in the high frequencies and word final production of s/z are particularly critical for morpheme acquisition in children who are HH. PMID:25650750

Psychometric Analysis of Young Children's Responses to the Slosson Intelligence Test-Primary (SIT-P)

ERIC Educational Resources Information Center

Erford, Bradley T.; Pauletta, Deborah

2005-01-01

When developing efficient treatment plans for a client or student, professional counselors frequently rely on information about intellectual ability. The Slosson Intelligence Test-Primary (SIT-P; Erford, Vitali, & Slosson, 1999) is an expansion of the Slosson Intelligence Test-Revised (SIT-R; Nicholson & Hibpshman, 1991) and includes a…

Assessment of American Indian Children as Measured by the SON-R and WISC-III.

ERIC Educational Resources Information Center

Curran, Lisa; And Others

A major criticism of standardized intelligence tests is their improper use in measuring the intellectual competence of culturally diverse children. Factors which complicate the issue are the definition of intelligence, content bias in intelligence tests, and the interpretation of test scores between white middle class children and children of…

Present Status and Challenges of Intellectual Assessment in India

ERIC Educational Resources Information Center

Basu, Jayanti

2016-01-01

Intelligence testing was one of the earliest interests of psychologists in India. Adaptation of Western intelligence tests has been a focus of psychologists in the first half of the last century. Indigenous development of intelligence tests has been attempted, but diversity of language and culture, complexity of school systems, and infrastructural…

Gender Differences in the Relationship between Emotional Intelligence and Right Hemisphere Lateralization for Facial Processing

ERIC Educational Resources Information Center

Castro-Schilo, Laura; Kee, Daniel W.

2010-01-01

The present study examined relationships between emotional intelligence, measured by the Mayer-Salovey-Caruso Emotional Intelligence Test, and right hemisphere dominance for a free vision chimeric face test. A sample of 122 ethnically diverse college students participated and completed online versions of the forenamed tests. A hierarchical…

Evaluation of BLAST-based edge-weighting metrics used for homology inference with the Markov Clustering algorithm.

PubMed

Gibbons, Theodore R; Mount, Stephen M; Cooper, Endymion D; Delwiche, Charles F

2015-07-10

Clustering protein sequences according to inferred homology is a fundamental step in the analysis of many large data sets. Since the publication of the Markov Clustering (MCL) algorithm in 2002, it has been the centerpiece of several popular applications. Each of these approaches generates an undirected graph that represents sequences as nodes connected to each other by edges weighted with a BLAST-based metric. MCL is then used to infer clusters of homologous proteins by analyzing these graphs. The various approaches differ only by how they weight the edges, yet there has been very little direct examination of the relative performance of alternative edge-weighting metrics. This study compares the performance of four BLAST-based edge-weighting metrics: the bit score, bit score ratio (BSR), bit score over anchored length (BAL), and negative common log of the expectation value (NLE). Performance is tested using the Extended CEGMA KOGs (ECK) database, which we introduce here. All metrics performed similarly when analyzing full-length sequences, but dramatic differences emerged as progressively larger fractions of the test sequences were split into fragments. The BSR and BAL successfully rescued subsets of clusters by strengthening certain types of alignments between fragmented sequences, but also shifted the largest correct scores down near the range of scores generated from spurious alignments. This penalty outweighed the benefits in most test cases, and was greatly exacerbated by increasing the MCL inflation parameter, making these metrics less robust than the bit score or the more popular NLE. Notably, the bit score performed as well or better than the other three metrics in all scenarios. The results provide a strong case for use of the bit score, which appears to offer equivalent or superior performance to the more popular NLE. The insight that MCL-based clustering methods can be improved using a more tractable edge-weighting metric will greatly simplify future implementations. We demonstrate this with our own minimalist Python implementation: Porthos, which uses only standard libraries and can process a graph with 25 m + edges connecting the 60 k + KOG sequences in half a minute using less than half a gigabyte of memory.

Multiple Aptitude Normative Intelligence Testing that Distinguishes U.S. Air Force MQ-1 Predator Sensor Operators from Peers in the Civilian General Population and AC-130 Gunship Sensor Operators

DTIC Science & Technology

2011-07-01

intellectual ability. It is fashioned after the Wechsler Adult Intelligence Scale (Ref 11), which is the most widely used, individually administered test...Multidimensional Aptitude Battery-II Manual, Sigma Assessment Systems Inc., London, 2003. 11. Wechsler D, Wechsler Adult Intelligence Scale® – Third...AFRL-SA-WP-TR-2011-0006 MULTIPLE APTITUDE NORMATIVE INTELLIGENCE TESTING THAT DISTINGUISHES U.S. AIR FORCE MQ-1 PREDATOR SENSOR

a Real-Time Computer Music Synthesis System

NASA Astrophysics Data System (ADS)

Lent, Keith Henry

A real time sound synthesis system has been developed at the Computer Music Center of The University of Texas at Austin. This system consists of several stand alone processors that were constructed jointly with White Instruments in Austin. These processors can be programmed as general purpose computers, but are provided with a number of specialized interfaces including: MIDI, 8 bit parallel, high speed serial, 2 channels analog input (18 bit A/Ds, 48kHz sample rate), and 4 channels analog output (18 bit D/As). In addition, a basic music synthesis language (Music56000) has been written in assembly code. On top of this, a symbolic compiler (PatchWork) has been developed to enable algorithms which run in these processors to be created graphically. And finally, a number of efficient time domain numerical models have been developed to enable the construction, simulation, control, and synthesis of many musical acoustics systems in real time on these processors. Specifically, assembly language models for cylindrical and conical horn sections, dissipative losses, tone holes, bells, and a number of linear and nonlinear boundary conditions have been developed.

A multi-state magnetic memory dependent on the permeability of Metglas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Petrie, J. R.; Wieland, K. A.; Timmerwilke, J. M.

A three-state magnetic memory was developed based on differences in the magnetic permeability of a soft ferromagnetic media, Metglas 2826MB (Fe{sub 40}Ni{sub 38}Mo{sub 4}B{sub 18}). By heating bits of a 250 nm thick Metglas film with 70–100 mW of laser power, we were able to tune the local microstructure, and hence, the permeability. Ternary memory states were created by using lower laser power to enhance the initial permeability through localized atomic rearrangement and higher power to reduce the permeability through crystallization. The permeability of the bits was read by detecting variations in an external 32 Oe probe field within 10 μm ofmore » the media via a magnetic tunnel junction read head. Compared to data based on remanent magnetization, these multi-permeability bits have enhanced insensitivity to unexpected field and temperature changes. We found that data was not corrupted after exposure to fields of 1 T or temperatures of 423 K, indicating the effectiveness of this multi-state approach for safely storing large amounts of data.« less

Error control for reliable digital data transmission and storage systems

NASA Technical Reports Server (NTRS)

Costello, D. J., Jr.; Deng, R. H.

1985-01-01

A problem in designing semiconductor memories is to provide some measure of error control without requiring excessive coding overhead or decoding time. In LSI and VLSI technology, memories are often organized on a multiple bit (or byte) per chip basis. For example, some 256K-bit DRAM's are organized in 32Kx8 bit-bytes. Byte oriented codes such as Reed Solomon (RS) codes can provide efficient low overhead error control for such memories. However, the standard iterative algorithm for decoding RS codes is too slow for these applications. In this paper we present some special decoding techniques for extended single-and-double-error-correcting RS codes which are capable of high speed operation. These techniques are designed to find the error locations and the error values directly from the syndrome without having to use the iterative alorithm to find the error locator polynomial. Two codes are considered: (1) a d sub min = 4 single-byte-error-correcting (SBEC), double-byte-error-detecting (DBED) RS code; and (2) a d sub min = 6 double-byte-error-correcting (DBEC), triple-byte-error-detecting (TBED) RS code.

Rhythm Perception and Its Role in Perception and Learning of Dysrhythmic Speech.

PubMed

Borrie, Stephanie A; Lansford, Kaitlin L; Barrett, Tyson S

2017-03-01

The perception of rhythm cues plays an important role in recognizing spoken language, especially in adverse listening conditions. Indeed, this has been shown to hold true even when the rhythm cues themselves are dysrhythmic. This study investigates whether expertise in rhythm perception provides a processing advantage for perception (initial intelligibility) and learning (intelligibility improvement) of naturally dysrhythmic speech, dysarthria. Fifty young adults with typical hearing participated in 3 key tests, including a rhythm perception test, a receptive vocabulary test, and a speech perception and learning test, with standard pretest, familiarization, and posttest phases. Initial intelligibility scores were calculated as the proportion of correct pretest words, while intelligibility improvement scores were calculated by subtracting this proportion from the proportion of correct posttest words. Rhythm perception scores predicted intelligibility improvement scores but not initial intelligibility. On the other hand, receptive vocabulary scores predicted initial intelligibility scores but not intelligibility improvement. Expertise in rhythm perception appears to provide an advantage for processing dysrhythmic speech, but a familiarization experience is required for the advantage to be realized. Findings are discussed in relation to the role of rhythm in speech processing and shed light on processing models that consider the consequence of rhythm abnormalities in dysarthria.

Predicting protein submitochondrial locations using a K-Nearest neighbor method based on the Bit-Score weighted euclidean distance

USDA-ARS?s Scientific Manuscript database

Mitochondria are essential subcellular organelles found in eukaryotic cells. Knowing information on a protein’s subcellular or sub subcellular location provides in-depth insights about the microenvironment where it interacts with other molecules and is crucial for inferring the protein’s function. T...

76 FR 5330 - University of Chicago, et al.; Notice of Decision on Applications for Duty-Free Entry of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-31

.... Instrument: Pilatus 100K Pixel Detector System. Manufacturer: Dectris Ltd., Switzerland. Intended Use: See... detection scheme), high dynamic range (20- bits), and fast readout speeds. Docket Number: 10-068. Applicant... System. Manufacturer: Dectris Ltd., Switzerland. Intended Use: See Notice at 75 FR 82372, December 30...

Concatenations of the Hidden Weighted Bit Function and Their Cryptographic Properties

DTIC Science & Technology

2014-01-01

a collection of information if it does not display a currently valid OMB control number. 1. REPORT DATE 2014 2. REPORT TYPE 3. DATES COVERED 00...nonlinearity, in Advances in Cryptology – ASIACRYPT 2008 , Springer-Verlag, 2008, 425–440. [6] C. Carlet and K. Feng, An infinite class of balanced vectorial

Sparse distributed memory prototype: Principles of operation

NASA Technical Reports Server (NTRS)

Flynn, Michael J.; Kanerva, Pentti; Ahanin, Bahram; Bhadkamkar, Neal; Flaherty, Paul; Hickey, Philip

1988-01-01

Sparse distributed memory is a generalized random access memory (RAM) for long binary words. Such words can be written into and read from the memory, and they can be used to address the memory. The main attribute of the memory is sensitivity to similarity, meaning that a word can be read back not only by giving the original right address but also by giving one close to it as measured by the Hamming distance between addresses. Large memories of this kind are expected to have wide use in speech and scene analysis, in signal detection and verification, and in adaptive control of automated equipment. The memory can be realized as a simple, massively parallel computer. Digital technology has reached a point where building large memories is becoming practical. The research is aimed at resolving major design issues that have to be faced in building the memories. The design of a prototype memory with 256-bit addresses and from 8K to 128K locations for 256-bit words is described. A key aspect of the design is extensive use of dynamic RAM and other standard components.

A 4 μW/Ch analog front-end module with moderate inversion and power-scalable sampling operation for 3-D neural microsystems.

PubMed

Al-Ashmouny, Khaled M; Chang, Sun-Il; Yoon, Euisik

2012-10-01

We report an analog front-end prototype designed in 0.25 μm CMOS process for hybrid integration into 3-D neural recording microsystems. For scaling towards massive parallel neural recording, the prototype has investigated some critical circuit challenges in power, area, interface, and modularity. We achieved extremely low power consumption of 4 μW/channel, optimized energy efficiency using moderate inversion in low-noise amplifiers (K of 5.98 × 10⁸ or NEF of 2.9), and minimized asynchronous interface (only 2 per 16 channels) for command and data capturing. We also implemented adaptable operations including programmable-gain amplification, power-scalable sampling (up to 50 kS/s/channel), wide configuration range (9-bit) for programmable gain and bandwidth, and 5-bit site selection capability (selecting 16 out of 128 sites). The implemented front-end module has achieved a reduction in noise-energy-area product by a factor of 5-25 times as compared to the state-of-the-art analog front-end approaches reported to date.

Intelligence and Psychopathy Do Not Influence Malingering.

PubMed

Demakis, George; Rimland, Casey; Reeve, Charlie; Ward, Jonathan

2015-01-01

This study examined the influence of psychopathy and intelligence on malingering in a simulated malingering design. We hypothesized that participants high in both traits would be more adept at evading detection on performance validity tests (PVTs). College students (N = 92) were first administered the Wechsler Test of Adult Reading, a reading measure that estimates intelligence, and the Psychopathic Personality Inventory-Short Form under standard conditions. They were then asked to imagine as if they had suffered a concussion a year ago and were instructed to fake or exaggerate symptoms in a believable fashion to improve their settlement as part of a lawsuit. Participants were subsequently administered a brief neuropsychological battery that included the Word Memory Test, Rey 15-Item Test with Recognition, Finger-Tapping Test, and Digit Span from the Wechsler Adult Intelligence Scale-Fourth Edition. Moderated multiple regressions with hierarchical entry were conducted. Intelligence, psychopathy, and the interaction of intelligence and psychopathy were not related to performance on any of the PVTs. In other words, participants who scored higher on intelligence and psychopathy did not perform differently on these measures compared with other participants. Though a null finding, implications of this study are discussed in terms of the broader research and clinical literature on malingering.

32 CFR 1701.23 - Exemption of Office of Inspector General (OIG) systems of records.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Defense OFFICE OF THE DIRECTOR OF NATIONAL INTELLIGENCE ADMINISTRATION OF RECORDS UNDER THE PRIVACY ACT OF...)(1) and (k)(5) of the Act: (1) OIG Human Resources Records (ODNI/OIG-001). (2) OIG Experts Contact... the investigative interest of intelligence or law enforcement agencies or compromise sensitive...

Artificial Intelligence, Computational Thinking, and Mathematics Education

ERIC Educational Resources Information Center

Gadanidis, George

2017-01-01

Purpose: The purpose of this paper is to examine the intersection of artificial intelligence (AI), computational thinking (CT), and mathematics education (ME) for young students (K-8). Specifically, it focuses on three key elements that are common to AI, CT and ME: agency, modeling of phenomena and abstracting concepts beyond specific instances.…

Mindful Education for ADHD Students: Differentiating Curriculum and Instruction Using Multiple Intelligences

ERIC Educational Resources Information Center

Proulx-Schirduan, Victoria; Shearer, C. Branton; Case, Karen I.

2009-01-01

This practical guide describes ways of working with learners diagnosed with Attention Deficit Hyperactivity Disorder (ADHD) by using Multiple Intelligences Theory. Written for all educators as well as parents, it examines curricular, instructional, school partnering, and leadership issues that may arise for these students in grades K-8. Supported…

Design, Implementation, and Operational Methodologies for Sub-arcsecond Attitude Determination, Control, and Stabilization of the Super-pressure Balloon-Borne Imaging Telescope (SuperBIT)

NASA Astrophysics Data System (ADS)

Javier Romualdez, Luis

Scientific balloon-borne instrumentation offers an attractive, competitive, and effective alternative to space-borne missions when considering the overall scope, cost, and development timescale required to design and launch scientific instruments. In particular, the balloon-borne environment provides a near-space regime that is suitable for a number of modern astronomical and cosmological experiments, where the atmospheric interference suffered by ground-based instrumentation is negligible at stratospheric altitudes. This work is centered around the analytical strategies and implementation considerations for the attitude determination and control of SuperBIT, a scientific balloon-borne payload capable of meeting the strict sub-arcsecond pointing and image stability requirements demanded by modern cosmological experiments. Broadly speaking, the designed stability specifications of SuperBIT coupled with its observational efficiency, image quality, and accessibility rivals state-of-the-art astronomical observatories such as the Hubble Space Telescope. To this end, this work presents an end-to-end design methodology for precision pointing balloon-borne payloads such as SuperBIT within an analytical yet implementationally grounded context. Simulation models of SuperBIT are analytically derived to aid in pre-assembly trade-off and case studies that are pertinent to the dynamic balloon-borne environment. From these results, state estimation techniques and control methodologies are extensively developed, leveraging the analytical framework of simulation models and design studies. This pre-assembly design phase is physically validated during assembly, integration, and testing through implementation in real-time hardware and software, which bridges the gap between analytical results and practical application. SuperBIT attitude determination and control is demonstrated throughout two engineering test flights that verify pointing and image stability requirements in flight, where the post-flight results close the overall design loop by suggesting practical improvements to pre-design methodologies. Overall, the analytical and practical results presented in this work, though centered around the SuperBIT project, provide generically useful and implementationally viable methodologies for high precision balloon-borne instrumentation, all of which are validated, justified, and improved both theoretically and practically. As such, the continuing development of SuperBIT, built from the work presented in this thesis, strives to further the potential for scientific balloon-borne astronomy in the near future.

Summary of Altitude Pulse Testing of a 100-lbf L02/LCH4 Reaction Control Engine

NASA Technical Reports Server (NTRS)

Marshall, William M.; Kleinhenz, Julie E.

2011-01-01

Recently, liquid oxygen-liquid methane (LO2/LCH4) has been considered as a potential "green" propellant alternative for future exploration missions. The Propulsion and Cryogenic Advanced Development (PCAD) project has been tasked by NASA to develop this propulsion combination to enable safe and cost effective exploration missions. To date, limited experience with such combinations exist, and as a result a comprehensive test program is critical to demonstrating the viability of implementing such a system. The NASA Glenn Research Center has conducted a test program of a 100-lbf (445-N) reaction control engine (RCE) at the center s Altitude Combustion Stand (ACS), focusing on altitude testing over a wide variety of operational conditions. The ACS facility includes a unique propellant conditioning feed system (PCFS) which allows precise control of propellant inlet conditions to the engine. Engine performance as a result of these inlet conditions was examined extensively during the test program. This paper is a companion to the previous specific impulse testing paper, and discusses the pulsed mode operation portion of testing, with a focus on minimum impulse bit (I-bit) and repeatable pulse performance. The engine successfully demonstrated target minimum impulse bit performance at all conditions, as well as successful demonstration of repeatable pulse widths. Some anomalous conditions experienced during testing are also discussed, including a double pulse phenomenon which was not noted in previous test programs for this engine.

Built-In Data-Flow Integration Testing in Large-Scale Component-Based Systems

NASA Astrophysics Data System (ADS)

Piel, Éric; Gonzalez-Sanchez, Alberto; Gross, Hans-Gerhard

Modern large-scale component-based applications and service ecosystems are built following a number of different component models and architectural styles, such as the data-flow architectural style. In this style, each building block receives data from a previous one in the flow and sends output data to other components. This organisation expresses information flows adequately, and also favours decoupling between the components, leading to easier maintenance and quicker evolution of the system. Integration testing is a major means to ensure the quality of large systems. Their size and complexity, together with the fact that they are developed and maintained by several stake holders, make Built-In Testing (BIT) an attractive approach to manage their integration testing. However, so far no technique has been proposed that combines BIT and data-flow integration testing. We have introduced the notion of a virtual component in order to realize such a combination. It permits to define the behaviour of several components assembled to process a flow of data, using BIT. Test-cases are defined in a way that they are simple to write and flexible to adapt. We present two implementations of our proposed virtual component integration testing technique, and we extend our previous proposal to detect and handle errors in the definition by the user. The evaluation of the virtual component testing approach suggests that more issues can be detected in systems with data-flows than through other integration testing approaches.

Exploring the roles of spectral detail and intonation contour in speech intelligibility: an FMRI study.

PubMed

Kyong, Jeong S; Scott, Sophie K; Rosen, Stuart; Howe, Timothy B; Agnew, Zarinah K; McGettigan, Carolyn

2014-08-01

The melodic contour of speech forms an important perceptual aspect of tonal and nontonal languages and an important limiting factor on the intelligibility of speech heard through a cochlear implant. Previous work exploring the neural correlates of speech comprehension identified a left-dominant pathway in the temporal lobes supporting the extraction of an intelligible linguistic message, whereas the right anterior temporal lobe showed an overall preference for signals clearly conveying dynamic pitch information [Johnsrude, I. S., Penhune, V. B., & Zatorre, R. J. Functional specificity in the right human auditory cortex for perceiving pitch direction. Brain, 123, 155-163, 2000; Scott, S. K., Blank, C. C., Rosen, S., & Wise, R. J. Identification of a pathway for intelligible speech in the left temporal lobe. Brain, 123, 2400-2406, 2000]. The current study combined modulations of overall intelligibility (through vocoding and spectral inversion) with a manipulation of pitch contour (normal vs. falling) to investigate the processing of spoken sentences in functional MRI. Our overall findings replicate and extend those of Scott et al. [Scott, S. K., Blank, C. C., Rosen, S., & Wise, R. J. Identification of a pathway for intelligible speech in the left temporal lobe. Brain, 123, 2400-2406, 2000], where greater sentence intelligibility was predominately associated with increased activity in the left STS, and the greatest response to normal sentence melody was found in right superior temporal gyrus. These data suggest a spatial distinction between brain areas associated with intelligibility and those involved in the processing of dynamic pitch information in speech. By including a set of complexity-matched unintelligible conditions created by spectral inversion, this is additionally the first study reporting a fully factorial exploration of spectrotemporal complexity and spectral inversion as they relate to the neural processing of speech intelligibility. Perhaps surprisingly, there was little evidence for an interaction between the two factors-we discuss the implications for the processing of sound and speech in the dorsolateral temporal lobes.

[Development and effects of emotional intelligence program for undergraduate nursing students: mixed methods research].

PubMed

Lee, Oi Sun; Gu, Mee Ock

2014-12-01

This study was conducted to develop and test the effects of an emotional intelligence program for undergraduate nursing students. The study design was a mixed method research. Participants were 36 nursing students (intervention group: 17, control group: 19). The emotional intelligence program was provided for 4 weeks (8 sessions, 20 hours). Data were collected between August 6 and October 4, 2013. Quantitative data were analyzed using Chi-square, Fisher's exact test, t-test, repeated measure ANOVA, and paired t-test with SPSS/WIN 18.0. Qualitative data were analyzed using content analysis. Quantitative results showed that emotional intelligence, communication skills, resilience, stress coping strategy, and clinical competence were significantly better in the experimental group compared to the control group. According to the qualitative results, the nursing students experienced improvement in emotional intelligence, interpersonal relationships, and empowerment, as well as a reduction in clinical practice stress after participation in the emotional intelligence program. Study findings indicate that the emotional intelligence program for undergraduate nursing students is effective and can be recommended as an intervention for improving the clinical competence of undergraduate students in a nursing curriculum.

The Social Embedding of Intelligence

NASA Astrophysics Data System (ADS)

Edmonds, Bruce

I claim that to pass the Turing Test over any period of extended time, it will be necessary to embed the entity into society. This chapter discusses why this is, and how it might be brought about. I start by arguing that intelligence is better characterized by tests of social interaction, especially in open-ended and extended situations. I then argue that learning is an essential component of intelligence and hence that a universal intelligence is impossible. These two arguments support the relevance of the Turing Test as a particular, but appropriate test of interactive intelligence. I look to the human case to argue that individual intelligence uses society to a considerable extent for its development. Taking a lead from the human case, I outline how a socially embedded Artificial Intelligence might be brought about in terms of four aspects: free will, emotion, empathy, and self-modeling. In each case, I try to specify what social 'hooks' might be required for the full ability to develop during a considerable period of in situ acculturation. The chapter ends by speculating what it might be like to live with the result.

Applying reconfigurable hardware to the analysis of multispectral and hyperspectral imagery

NASA Astrophysics Data System (ADS)

Leeser, Miriam E.; Belanovic, Pavle; Estlick, Michael; Gokhale, Maya; Szymanski, John J.; Theiler, James P.

2002-01-01

Unsupervised clustering is a powerful technique for processing multispectral and hyperspectral images. Last year, we reported on an implementation of k-means clustering for multispectral images. Our implementation in reconfigurable hardware processed 10 channel multispectral images two orders of magnitude faster than a software implementation of the same algorithm. The advantage of using reconfigurable hardware to accelerate k-means clustering is clear; the disadvantage is the hardware implementation worked for one specific dataset. It is a non-trivial task to change this implementation to handle a dataset with different number of spectral channels, bits per spectral channel, or number of pixels; or to change the number of clusters. These changes required knowledge of the hardware design process and could take several days of a designer's time. Since multispectral data sets come in many shapes and sizes, being able to easily change the k-means implementation for these different data sets is important. For this reason, we have developed a parameterized implementation of the k-means algorithm. Our design is parameterized by the number of pixels in an image, the number of channels per pixel, and the number of bits per channel as well as the number of clusters. These parameters can easily be changed in a few minutes by someone not familiar with the design process. The resulting implementation is very close in performance to the original hardware implementation. It has the added advantage that the parameterized design compiles approximately three times faster than the original.

The Development and Application of Intelligence Tests for the Blind: A Research Utilization Conference. Final Report.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Div. for Exceptional Children.

Reported are the proceedings and recommendations of a research conference to improve the development and utilization of intelligence tests for use with blind adults in social and vocational rehabilitation. The following tests are considered: A Haptic Intelligence Scale for the Adult Blind, the Raven Progressive Matrices for Presentation to the…

Is "g" an Entity? A Japanese Twin Study Using Syllogisms and Intelligence Tests

ERIC Educational Resources Information Center

Shikishima, Chizuru; Hiraishi, Kai; Yamagata, Shinji; Sugimoto, Yutaro; Takemura, Ryo; Ozaki, Koken; Okada, Mitsuhiro; Toda, Tatsushi; Ando, Juko

2009-01-01

Using a behavioral genetic approach, we examined the validity of the hypothesis concerning the singularity of human general intelligence, the "g" theory, by analyzing data from two tests: the first consisted of 100 syllogism problems and the second a full-scale intelligence test. The participants were 448 Japanese young adult twins (167…