Stress-intensity factors for a wide range of semi-elliptical surface cracks in finite-thickness plates

NASA Technical Reports Server (NTRS)

Raju, I. S.; Newman, J. C., Jr.

1979-01-01

Surface cracks are among the more common flaws in aircraft and pressure vessel components. Several calculations of stress-intensity factors for semi-elliptical surface cracks subjected to tension have appeared in the literature. However, some of these solutions are in disagreement by 50-100%. In this paper, stress-intensity factors for shallow and deep semi-elliptical surface cracks in plates subjected to tension are presented. To verify the accuracy of the three-dimensional finite-element models employed, convergence was studied by varying the number of degrees of freedom in the models from 1500 to 6900. The 6900 degrees of freedom used here were more than twice the number used in previously reported solutions. Also, the stress-intensity variations in the boundary-layer region at the intersection of the crack with the free surface were investigated.

Spatiotemporal Industrial Activity Model for Estimating the Intensity of Oil and Gas Operations in Colorado.

PubMed

Allshouse, William B; Adgate, John L; Blair, Benjamin D; McKenzie, Lisa M

2017-09-05

Oil and gas (O&G) production in the United States has increased in the last 15 years, and operations, which are trending toward large multiwell pads, release hazardous air pollutants. Health studies have relied on proximity to O&G wells as an exposure metric, typically using an inverse distance-weighting (IDW) approach. Because O&G emissions are dependent on multiple factors, a dynamic model is needed to describe the variability in air pollution emissions over space and time. We used information on Colorado O&G activities, production volumes, and air pollutant emission rates from two Colorado basins to create a spatiotemporal industrial activity model to develop an intensity-adjusted IDW well-count metric. The Spearman correlation coefficient between this metric and measured pollutant concentrations was 0.74. We applied our model to households in Greeley, Colorado, which is in the middle of the densely developed Denver-Julesburg basin. Our intensity-adjusted IDW increased the unadjusted IDW dynamic range by a factor of 19 and distinguishes high-intensity events, such as hydraulic fracturing and flowback, from lower-intensity events, such as production at single-well pads. As the frequency of multiwell pads increases, it will become increasingly important to characterize the range of intensities at O&G sites when conducting epidemiological studies.

Damage Detection for Historical Architectures Based on Tls Intensity Data

NASA Astrophysics Data System (ADS)

Li, Q.; Cheng, X.

2018-04-01

TLS (Terrestrial Laser Scanner) has long been preferred in the cultural heritage field for 3D documentation of historical sites thanks to its ability to acquire the geometric information without any physical contact. Besides the geometric information, most TLS systems also record the intensity information, which is considered as an important measurement of the spectral property of the scanned surface. Recent studies have shown the potential of using intensity for damage detection. However, the original intensity is affected by scanning geometry such as range and incidence angle and other factors, thus making the results less accurate. Therefore, in this paper, we present a method to detect certain damage areas using the corrected intensity data. Firstly, two data-driven models have been developed to correct the range and incidence angle effect. Then the corrected intensity is used to generate 2D intensity images for classification. After the damage areas being detected, they are re-projected to the 3D point cloud for better visual representation and further investigation. The experiment results indicate the feasibility and validity of the corrected intensity for damage detection.

R & D of a Gas-Filled RF Beam Profile Monitor for Intense Neutrino Beam Experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yonehara, K.; Backfish, M.; Moretti, A.

We report the R&D of a novel radiation-robust hadron beam profile monitor based on a gas-filled RF cavity for intense neutrino beam experiments. An equivalent RF circuit model was made and simulated to optimize the RF parameter in a wide beam intensity range. As a result, the maximum acceptable beam intensity in the monitor is significantly increased by using a low-quality factor RF cavity. The plan for the demonstration test is set up to prepare for future neutrino beam experiments.

Women's underrepresentation in science: sociocultural and biological considerations.

PubMed

Ceci, Stephen J; Williams, Wendy M; Barnett, Susan M

2009-03-01

The underrepresentation of women at the top of math-intensive fields is controversial, with competing claims of biological and sociocultural causation. The authors develop a framework to delineate possible causal pathways and evaluate evidence for each. Biological evidence is contradictory and inconclusive. Although cross-cultural and cross-cohort differences suggest a powerful effect of sociocultural context, evidence for specific factors is inconsistent and contradictory. Factors unique to underrepresentation in math-intensive fields include the following: (a) Math-proficient women disproportionately prefer careers in non-math-intensive fields and are more likely to leave math-intensive careers as they advance; (b) more men than women score in the extreme math-proficient range on gatekeeper tests, such as the SAT Mathematics and the Graduate Record Examinations Quantitative Reasoning sections; (c) women with high math competence are disproportionately more likely to have high verbal competence, allowing greater choice of professions; and (d) in some math-intensive fields, women with children are penalized in promotion rates. The evidence indicates that women's preferences, potentially representing both free and constrained choices, constitute the most powerful explanatory factor; a secondary factor is performance on gatekeeper tests, most likely resulting from sociocultural rather than biological causes. (c) 2009 APA, all rights reserved.

Water, Sanitation and Hygiene (WASH) and environmental risk factors for soil-transmitted helminth intensity of infection in Timor-Leste, using real time PCR.

PubMed

Campbell, Suzy J; Nery, Susana V; Wardell, Rebecca; D'Este, Catherine A; Gray, Darren J; McCarthy, James S; Traub, Rebecca J; Andrews, Ross M; Llewellyn, Stacey; Vallely, Andrew J; Williams, Gail M; Clements, Archie C A

2017-03-01

No investigations have been undertaken of risk factors for intensity of soil-transmitted helminth (STH) infection in Timor-Leste. This study provides the first analysis of risk factors for intensity of STH infection, as determined by quantitative PCR (qPCR), examining a broad range of water, sanitation and hygiene (WASH) and environmental factors, among communities in Manufahi District, Timor-Leste. A baseline cross-sectional survey of 18 communities was undertaken as part of a cluster randomised controlled trial, with additional identically-collected data from six other communities. qPCR was used to assess STH infection from stool samples, and questionnaires administered to collect WASH, demographic, and socioeconomic data. Environmental information was obtained from open-access sources and linked to infection outcomes. Mixed-effects multinomial logistic regression was undertaken to assess risk factors for intensity of Necator americanus and Ascaris infection. 2152 participants provided stool and questionnaire information for this analysis. In adjusted models incorporating WASH, demographic and environmental variables, environmental variables were generally associated with infection intensity for both N. americanus and Ascaris spp. Precipitation (in centimetres) was associated with increased risk of moderate-intensity (adjusted relative risk [ARR] 6.1; 95% confidence interval [CI] 1.9-19.3) and heavy-intensity (ARR 6.6; 95% CI 3.1-14.1) N. americanus infection, as was sandy-loam soil around households (moderate-intensity ARR 2.1; 95% CI 1.0-4.3; heavy-intensity ARR 2.7; 95% CI 1.6-4.5; compared to no infection). For Ascaris, alkaline soil around the household was associated with reduced risk of moderate-intensity infection (ARR 0.21; 95% CI 0.09-0.51), and heavy-intensity infection (ARR 0.04; 95% CI 0.01-0.25). Few WASH risk factors were significant. In this high-prevalence setting, strong risk associations with environmental factors indicate that anthelmintic treatment alone will be insufficient to interrupt STH transmission, as conditions are favourable for ongoing environmental transmission. Integrated STH control strategies should be explored as a priority.

Water, Sanitation and Hygiene (WASH) and environmental risk factors for soil-transmitted helminth intensity of infection in Timor-Leste, using real time PCR

PubMed Central

Nery, Susana V.; Wardell, Rebecca; D’Este, Catherine A.; Gray, Darren J.; McCarthy, James S.; Traub, Rebecca J.; Andrews, Ross M.; Llewellyn, Stacey; Vallely, Andrew J.; Williams, Gail M.; Clements, Archie C. A.

2017-01-01

Background No investigations have been undertaken of risk factors for intensity of soil-transmitted helminth (STH) infection in Timor-Leste. This study provides the first analysis of risk factors for intensity of STH infection, as determined by quantitative PCR (qPCR), examining a broad range of water, sanitation and hygiene (WASH) and environmental factors, among communities in Manufahi District, Timor-Leste. Methods A baseline cross-sectional survey of 18 communities was undertaken as part of a cluster randomised controlled trial, with additional identically-collected data from six other communities. qPCR was used to assess STH infection from stool samples, and questionnaires administered to collect WASH, demographic, and socioeconomic data. Environmental information was obtained from open-access sources and linked to infection outcomes. Mixed-effects multinomial logistic regression was undertaken to assess risk factors for intensity of Necator americanus and Ascaris infection. Results 2152 participants provided stool and questionnaire information for this analysis. In adjusted models incorporating WASH, demographic and environmental variables, environmental variables were generally associated with infection intensity for both N. americanus and Ascaris spp. Precipitation (in centimetres) was associated with increased risk of moderate-intensity (adjusted relative risk [ARR] 6.1; 95% confidence interval [CI] 1.9–19.3) and heavy-intensity (ARR 6.6; 95% CI 3.1–14.1) N. americanus infection, as was sandy-loam soil around households (moderate-intensity ARR 2.1; 95% CI 1.0–4.3; heavy-intensity ARR 2.7; 95% CI 1.6–4.5; compared to no infection). For Ascaris, alkaline soil around the household was associated with reduced risk of moderate-intensity infection (ARR 0.21; 95% CI 0.09–0.51), and heavy-intensity infection (ARR 0.04; 95% CI 0.01–0.25). Few WASH risk factors were significant. Conclusion In this high-prevalence setting, strong risk associations with environmental factors indicate that anthelmintic treatment alone will be insufficient to interrupt STH transmission, as conditions are favourable for ongoing environmental transmission. Integrated STH control strategies should be explored as a priority. PMID:28346536

Three-dimensional finite-element analysis of chevron-notched fracture specimens

NASA Technical Reports Server (NTRS)

Raju, I. S.; Newman, J. C., Jr.

1984-01-01

Stress-intensity factors and load-line displacements were calculated for chevron-notched bar and rod fracture specimens using a three-dimensional finite-element analysis. Both specimens were subjected to simulated wedge loading (either uniform applied displacement or uniform applied load). The chevron-notch sides and crack front were assumed to be straight. Crack-length-to-specimen width ratios (a/w) ranged from 0.4 to 0.7. The width-to-thickness ratio (w/B) was 1.45 or 2. The bar specimens had a height-to-width ratio of 0.435 or 0.5. Finite-element models were composed of singularity elements around the crack front and 8-noded isoparametric elements elsewhere. The models had about 11,000 degrees of freedom. Stress-intensity factors were calculated by using a nodal-force method for distribution along the crack front and by using a compliance method for average values. The stress intensity factors and load-line displacements are presented and compared with experimental solutions from the literature. The stress intensity factors and load-line displacements were about 2.5 and 5 percent lower than the reported experimental values, respectively.

Fatigue 󈨛. Papers presented at the International Conference on Fatigue and Fatigue Threshold (3rd) Held in Charlottesville, Virginia on June 28-July 3, 1987. Volume 1.

DTIC Science & Technology

1987-10-15

87 da/dn (m/ ciclo ) 10-07 lO-Og 10-° 08 ’ 1009 R=0.5 S* 4 -Long Crack 10- t 10 Smax = 195 MPa *Smax = 205 MPa 0Smax = 225 NlPa O. 1 5 10 AK(%Pa/m...Figure 1 Crack growth rate vs stress intensity factor range -06 10 da/dn (m/ ciclo ) 10 - 07 _ 10-1, o o :R = 0 -Long crack 1 0 e Smax = 110 Nla # Smax...120 Mffa a Smax = 145 Ngla . 5 10 50 Figure 2 Crack growth rate vs stress intensity factor range 278 FATIGUE 87 6 da/dJn (ni/ ciclo ) lo* R I Long crack

Spatial distribution and risk factors of Schistosoma haematobium and hookworm infections among schoolchildren in Kwale, Kenya

PubMed Central

Chadeka, Evans Asena; Nagi, Sachiyo; Sunahara, Toshihiko; Cheruiyot, Ngetich Benard; Bahati, Felix; Ozeki, Yuriko; Inoue, Manabu; Osada-Oka, Mayuko; Okabe, Mayuko; Hirayama, Yukio; Changoma, Mwatasa; Adachi, Keishi; Mwende, Faith; Kikuchi, Mihoko; Nakamura, Risa; Kalenda, Yombo Dan Justin; Kaneko, Satoshi; Hirayama, Kenji; Shimada, Masaaki; Ichinose, Yoshio; Njenga, Sammy M.; Matsumoto, Sohkichi

2017-01-01

Background Large-scale schistosomiasis control programs are implemented in regions with diverse social and economic environments. A key epidemiological feature of schistosomiasis is its small-scale heterogeneity. Locally profiling disease dynamics including risk factors associated with its transmission is essential for designing appropriate control programs. To determine spatial distribution of schistosomiasis and its drivers, we examined schoolchildren in Kwale, Kenya. Methodology/Principal findings We conducted a cross-sectional study of 368 schoolchildren from six primary schools. Soil-transmitted helminths and Schistosoma mansoni eggs in stool were evaluated by the Kato-Katz method. We measured the intensity of Schistosoma haematobium infection by urine filtration. The geometrical mean intensity of S. haematobium was 3.1 eggs/10 ml urine (school range, 1.4–9.2). The hookworm geometric mean intensity was 3.2 eggs/g feces (school range, 0–17.4). Heterogeneity in the intensity of S. haematobium and hookworm infections was evident in the study area. To identify factors associated with the intensity of helminth infections, we utilized negative binomial generalized linear mixed models. The intensity of S. haematobium infection was associated with religion and socioeconomic status (SES), while that of hookworm infection was related to SES, sex, distance to river and history of anthelmintic treatment. Conclusions/Significance Both S. haematobium and hookworm infections showed micro-geographical heterogeneities in this Kwale community. To confirm and explain our observation of high S. haematobium risk among Muslims, further extensive investigations are necessary. The observed small scale clustering of the S. haematobium and hookworm infections might imply less uniform strategies even at finer scale for efficient utilization of limited resources. PMID:28863133

Correlation of neonatal intensive care unit performance across multiple measures of quality of care.

PubMed

Profit, Jochen; Zupancic, John A F; Gould, Jeffrey B; Pietz, Kenneth; Kowalkowski, Marc A; Draper, David; Hysong, Sylvia J; Petersen, Laura A

2013-01-01

To examine whether high performance on one measure of quality is associated with high performance on others and to develop a data-driven explanatory model of neonatal intensive care unit (NICU) performance. We conducted a cross-sectional data analysis of a statewide perinatal care database. Risk-adjusted NICU ranks were computed for each of 8 measures of quality selected based on expert input. Correlations across measures were tested using the Pearson correlation coefficient. Exploratory factor analysis was used to determine whether underlying factors were driving the correlations. Twenty-two regional NICUs in California. In total, 5445 very low-birth-weight infants cared for between January 1, 2004, and December 31, 2007. Pneumothorax, growth velocity, health care-associated infection, antenatal corticosteroid use, hypothermia during the first hour of life, chronic lung disease, mortality in the NICU, and discharge on any human breast milk. The NICUs varied substantially in their clinical performance across measures of quality. Of 28 unit-level correlations, 6 were significant (ρ < .05). Correlations between pairs of measures of quality of care were strong (ρ ≥ .5) for 1 pair, moderate (range, ρ ≥ .3 to ρ < .5) for 8 pairs, weak (range, ρ ≥ .1 to ρ < .3) for 5 pairs, and negligible (ρ < .1) for 14 pairs. Exploratory factor analysis revealed 4 underlying factors of quality in this sample. Pneumothorax, mortality in the NICU, and antenatal corticosteroid use loaded on factor 1; growth velocity and health care-associated infection loaded on factor 2; chronic lung disease loaded on factor 3; and discharge on any human breast milk loaded on factor 4. In this sample, the ability of individual measures of quality to explain overall quality of neonatal intensive care was modest.

Application of fiber bridging models to fatigue crack growth in unidirectional titanium matrix composites

NASA Technical Reports Server (NTRS)

Bakuckas, J. G., Jr.; Johnson, W. S.

1992-01-01

Several fiber bridging models were reviewed and applied to study the matrix fatigue crack growth behavior in center notched (0)(sub 8) SCS-6/Ti-15-3 and (0)(sub 4) SCS-6/Ti-6Al-4V laminates. Observations revealed that fatigue damage consisted primarily of matrix cracks and fiber matrix interfacial failure in the (0)(sub 8) SCS-6/Ti-15-3 laminates. Fiber-matrix interface failure included fracture of the brittle reaction zone and cracking between the two carbon rich fiber coatings. Intact fibers in the wake of the matrix cracks reduce the stress intensity factor range. Thus, an applied stress intensity factor range is inappropriate to characterize matrix crack growth behavior. Fiber bridging models were used to determine the matrix stress intensity factor range in titanium metal matrix composites. In these models, the fibers in the wake of the crack are idealized as a closure pressure. An unknown constant frictional shear stress is assumed to act along the debond or slip length of the bridging fibers. The frictional shear stress was used as a curve fitting parameter to available data (crack growth data, crack opening displacement data, and debond length data). Large variations in the frictional shear stress required to fit the experimental data indicate that the fiber bridging models in their present form lack predictive capabilities. However, these models provide an efficient and relatively simple engineering method for conducting parametric studies of the matrix growth behavior based on constituent properties.

Demographics and practices of semi-intensive free-range farming systems in Australia with an outdoor stocking density of ≤1500 hens/hectare

PubMed Central

Ruhnke, Isabelle; de Koning, Carolyn; Drake, Kelly; Skerman, Alan G.; Hinch, Geoff N.; Glatz, Philip C.

2017-01-01

Baseline information on demographics and practices on semi-intensive free-range egg farms with an outdoor stocking density of ≤1500 hens/hectare in Australia is presented. Free-range egg production is changing the structure of the egg industry in Australia and a broad variety and tiers of free-range systems have emerged due to lack of concrete legislative standards on outdoor stocking densities in the past. Information was extracted from a pre-existing online free-range poultry survey dataset, consisting of a total of 79 questions related to nutrition, pasture management, welfare and health, animal housing, environmental impact and economics. Forty-one free-range egg farms, with an outdoor stocking density of ≤1500 hens/hectare, were identified in the dataset from all major Australian states. Two types of semi-intensive free-range housing systems were documented: mobile (modified caravan/trailer) housing (56%), and fixed sheds (44%). Seventy-two percent of respondents reported >75% of the hens in the flock used the outdoor range. All respondents reported ingestion of range components by hens in the form of vegetation, insects, stones and grit. Up to 10% mortality was reported by 40% respondents with predation (34%), cannibalism (29%), heat stress (24%) and grass impaction (19.5%) as major causes. Biosecurity on farms was sub-optimal with 8 of the 10 actions implemented by <50% respondents. Customer demand, consumer sentiment and welfare were the major factors for farmers moving into free-range egg production. This study resulted in identification of current practices and key challenges on semi-intensive free-range egg farms. Applied research and communication of results to farmers is highly recommended to ensure optimum health and welfare of free-range laying hens and sustained egg production. PMID:29065169

Demographics and practices of semi-intensive free-range farming systems in Australia with an outdoor stocking density of ≤1500 hens/hectare.

PubMed

Singh, Mini; Ruhnke, Isabelle; de Koning, Carolyn; Drake, Kelly; Skerman, Alan G; Hinch, Geoff N; Glatz, Philip C

2017-01-01

Baseline information on demographics and practices on semi-intensive free-range egg farms with an outdoor stocking density of ≤1500 hens/hectare in Australia is presented. Free-range egg production is changing the structure of the egg industry in Australia and a broad variety and tiers of free-range systems have emerged due to lack of concrete legislative standards on outdoor stocking densities in the past. Information was extracted from a pre-existing online free-range poultry survey dataset, consisting of a total of 79 questions related to nutrition, pasture management, welfare and health, animal housing, environmental impact and economics. Forty-one free-range egg farms, with an outdoor stocking density of ≤1500 hens/hectare, were identified in the dataset from all major Australian states. Two types of semi-intensive free-range housing systems were documented: mobile (modified caravan/trailer) housing (56%), and fixed sheds (44%). Seventy-two percent of respondents reported >75% of the hens in the flock used the outdoor range. All respondents reported ingestion of range components by hens in the form of vegetation, insects, stones and grit. Up to 10% mortality was reported by 40% respondents with predation (34%), cannibalism (29%), heat stress (24%) and grass impaction (19.5%) as major causes. Biosecurity on farms was sub-optimal with 8 of the 10 actions implemented by <50% respondents. Customer demand, consumer sentiment and welfare were the major factors for farmers moving into free-range egg production. This study resulted in identification of current practices and key challenges on semi-intensive free-range egg farms. Applied research and communication of results to farmers is highly recommended to ensure optimum health and welfare of free-range laying hens and sustained egg production.

On the measurement of the crack tip stress field as a means of determining Delta K(sub eff) under conditions of fatigue crack closure

NASA Technical Reports Server (NTRS)

Wallhead, Ian R.; Edwards, Lyndon; Poole, Peter

1994-01-01

The optical method of caustics has been successfully extended to enable stress intensity factors as low as 1MPa square root of m to be determined accurately for central fatigue cracks in 2024-T3 aluminium alloy test panels. The feasibility of using this technique to study crack closure, and to determine the effective stress intensity factor range, Delta K(sub eff), has been investigated. Comparisons have been made between the measured values of stress intensity factor, K(sub caus), and corresponding theoretical values, K(sub theo), for a range of fatigue cracks grown under different loading conditions. The values of K(sub caus) and K(sub theo) were in good agreement at maximum stress, where the cracks are fully open, while K(sub caus) exceeded K(sub theo) at minimum stress, due to crack closure. However, the levels of crack closure and values of Delta K(sub eff) obtained could not account for the variations of crack growth rate with loading conditions. It is concluded that the values of Delta K(sub eff), based on caustic measurements in a 1/square root of r stress field well outside the plastic zone, do not fully reflect local conditions which control crack tip behavior.

Effect of a physiotherapy rehabilitation program on knee osteoarthritis in patients with different pain intensities.

PubMed

Abdel-Aziem, Amr Almaz; Soliman, Elsadat Saad; Mosaad, Dalia Mohammed; Draz, Amira Hussin

2018-02-01

[Purpose] To examine the effect of physiotherapy rehabilitation program on moderate knee osteoarthritis in patients with different pain intensities. [Subjects and Methods] Sixty subjects (37 men and 23 women) with moderate knee osteoarthritis participated in the current study. Randomization software was used to select the participating subjects' numbers from the clinic records. They were classified into three groups according to pain intensity: mild, moderate, and severe pain groups. All groups underwent a standard set of pulsed electromagnetic field, ultrasound, stretching exercises, and strengthening exercises. Pain intensity, knee range of motion, knee function, and isometric quadriceps strength were evaluated using the visual analogue scale, universal goniometer, Western Ontario and McMaster Universities osteoarthritis index, and Jamar hydraulic dynamometer, respectively. The evaluation was performed before and after a 4-week rehabilitation program. [Results] All groups showed significant differences in pain intensity, knee range of motion, isometric quadriceps strength, and knee function. The score change in moderate pain group was significantly greater than those in mild and severe pain groups. [Conclusion] Pain intensity is one of the prominent factors that are responsible for the improvement of knee osteoarthritis. Consequently, pain intensity should be considered during rehabilitation of knee osteoarthritis.

Metabolic Equivalent Determination in the Cultural Dance of Hula

PubMed Central

Usagawa, T.; Look, M.; de Silva, M.; Stickley, C.; Kaholokula, J. K.; Seto, T.; Mau, M.

2014-01-01

Ethnic minorities share an unequal burden of cardiometabolic syndrome. Physical activity (PA) has been shown as an important factor to improve the health outcomes of these diseases. Metabolic equivalents (METs) have been calculated for diverse activities; however, most cultural activities have not been evaluated. Hula, the traditional dance of Native Hawaiians, is practiced by men and women of all ages but its MET value is unknown. To our knowledge, this is the first scientific evaluation of energy expenditure of hula. Nineteen competitive hula dancers performed two dance sets of low and high intensity hula. METs were measured with a portable indirect calorimetry device. Mean and standard deviations were calculated for all the variables. A two-way ANOVA was conducted to identify differences for gender and intensity. The mean MET were 5.7 (range 3.17 – 9.77) and 7.55 (range 4.43 – 12.0) for low intensity and high intensity, respectively. There was a significant difference between intensities and no significant difference between genders. This study demonstrates the energy expenditure of both low and high intensity hula met the recommended guidelines for moderate and vigorous intensity exercise, respectively and that hula can be utilized as a prescribed PA. PMID:24203801

Relativistic mirrors in laser plasmas (analytical methods)

NASA Astrophysics Data System (ADS)

Bulanov, S. V.; Esirkepov, T. Zh; Kando, M.; Koga, J.

2016-10-01

Relativistic flying mirrors in plasmas are realized as thin dense electron (or electron-ion) layers accelerated by high-intensity electromagnetic waves to velocities close to the speed of light in vacuum. The reflection of an electromagnetic wave from the relativistic mirror results in its energy and frequency changing. In a counter-propagation configuration, the frequency of the reflected wave is multiplied by the factor proportional to the Lorentz factor squared. This scientific area promises the development of sources of ultrashort x-ray pulses in the attosecond range. The expected intensity will reach the level at which the effects predicted by nonlinear quantum electrodynamics start to play a key role. We present an overview of theoretical methods used to describe relativistic flying, accelerating, oscillating mirrors emerging in intense laser-plasma interactions.

Internal noise sources limiting contrast sensitivity.

PubMed

Silvestre, Daphné; Arleo, Angelo; Allard, Rémy

2018-02-07

Contrast sensitivity varies substantially as a function of spatial frequency and luminance intensity. The variation as a function of luminance intensity is well known and characterized by three laws that can be attributed to the impact of three internal noise sources: early spontaneous neural activity limiting contrast sensitivity at low luminance intensities (i.e. early noise responsible for the linear law), probabilistic photon absorption at intermediate luminance intensities (i.e. photon noise responsible for de Vries-Rose law) and late spontaneous neural activity at high luminance intensities (i.e. late noise responsible for Weber's law). The aim of this study was to characterize how the impact of these three internal noise sources vary with spatial frequency and determine which one is limiting contrast sensitivity as a function of luminance intensity and spatial frequency. To estimate the impact of the different internal noise sources, the current study used an external noise paradigm to factorize contrast sensitivity into equivalent input noise and calculation efficiency over a wide range of luminance intensities and spatial frequencies. The impact of early and late noise was found to drop linearly with spatial frequency, whereas the impact of photon noise rose with spatial frequency due to ocular factors.

Fracture mechanics approach to estimate fatigue lives of welded lap-shear specimens

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lam, Poh -Sang; Pan, Jwo

A full range of stress intensity factor solutions for a kinked crack with finite length is developed as a function of weld width and the sheet thickness. When used with the main crack solutions (global stress intensity factors) in terms of the applied load and the specimen geometric parameters, the fatigue lived of the kinked crack can be estimated for the laser-welded lap-shear specimens. The predicted curve for the load range-fatigue life passes through the cluster of experimental data and is in good agreement. A classical solution associated with an infinitesimal kink is also employed. Furthermore, its life prediction tendsmore » to overestimate the actual fatigue life. In addition, the traditional fatigue life estimation based on structural stress is performed for completeness. As a result, this non-fracture mechanics approach only agrees well with the experimental data under high cyclic load conditions.« less

Fracture mechanics approach to estimate fatigue lives of welded lap-shear specimens

DOE PAGES

Lam, Poh -Sang; Pan, Jwo

2015-06-29

A full range of stress intensity factor solutions for a kinked crack with finite length is developed as a function of weld width and the sheet thickness. When used with the main crack solutions (global stress intensity factors) in terms of the applied load and the specimen geometric parameters, the fatigue lived of the kinked crack can be estimated for the laser-welded lap-shear specimens. The predicted curve for the load range-fatigue life passes through the cluster of experimental data and is in good agreement. A classical solution associated with an infinitesimal kink is also employed. Furthermore, its life prediction tendsmore » to overestimate the actual fatigue life. In addition, the traditional fatigue life estimation based on structural stress is performed for completeness. As a result, this non-fracture mechanics approach only agrees well with the experimental data under high cyclic load conditions.« less

Estimating earthquake magnitudes from reported intensities in the central and eastern United States

USGS Publications Warehouse

Boyd, Oliver; Cramer, Chris H.

2014-01-01

A new macroseismic intensity prediction equation is derived for the central and eastern United States and is used to estimate the magnitudes of the 1811–1812 New Madrid, Missouri, and 1886 Charleston, South Carolina, earthquakes. This work improves upon previous derivations of intensity prediction equations by including additional intensity data, correcting magnitudes in the intensity datasets to moment magnitude, and accounting for the spatial and temporal population distributions. The new relation leads to moment magnitude estimates for the New Madrid earthquakes that are toward the lower range of previous studies. Depending on the intensity dataset to which the new macroseismic intensity prediction equation is applied, mean estimates for the 16 December 1811, 23 January 1812, and 7 February 1812 mainshocks, and 16 December 1811 dawn aftershock range from 6.9 to 7.1, 6.8 to 7.1, 7.3 to 7.6, and 6.3 to 6.5, respectively. One‐sigma uncertainties on any given estimate could be as high as 0.3–0.4 magnitude units. We also estimate a magnitude of 6.9±0.3 for the 1886 Charleston, South Carolina, earthquake. We find a greater range of magnitude estimates when also accounting for multiple macroseismic intensity prediction equations. The inability to accurately and precisely ascertain magnitude from intensities increases the uncertainty of the central United States earthquake hazard by nearly a factor of two. Relative to the 2008 national seismic hazard maps, our range of possible 1811–1812 New Madrid earthquake magnitudes increases the coefficient of variation of seismic hazard estimates for Memphis, Tennessee, by 35%–42% for ground motions expected to be exceeded with a 2% probability in 50 years and by 27%–35% for ground motions expected to be exceeded with a 10% probability in 50 years.

Prey-mediated avoidance of an intraguild predator by its intraguild prey

USGS Publications Warehouse

Wilson, R.R.; Blankenship, T.L.; Hooten, M.B.; Shivik, J.A.

2010-01-01

Intraguild (IG) predation is an important factor influencing community structure, yet factors allowing coexistence of IG predator and IG prey are not well understood. The existence of spatial refuges for IG prey has recently been noted for their importance in allowing coexistence. However, reduction in basal prey availability might lead IG prey to leave spatial refuges for greater access to prey, leading to increased IG predation and fewer opportunities for coexistence. We determined how the availability of prey affected space-use patterns of bobcats (Lynx rufus, IG prey) in relation to coyote space-use patterns (Canis latrans, IG predators). We located animals from fall 2007 to spring 2009 and estimated bobcat home ranges and core areas seasonally. For each bobcat relocation, we determined intensity of coyote use, distance to water, small mammal biomass, and mean small mammal biomass of the home range during the season the location was collected. We built generalized linear mixed models and used Akaike Information Criteria to determine which factors best predicted bobcat space use. Coyote intensity was a primary determinant of bobcat core area location. In bobcat home ranges with abundant prey, core areas occurred where coyote use was low, but shifted to areas intensively used by coyotes when prey declined. High spatial variability in basal prey abundance allowed some bobcats to avoid coyotes while at the same time others were forced into more risky areas. Our results suggest that multiple behavioral strategies associated with spatial variation in basal prey abundance likely allow IG prey and IG predators to coexist. ?? 2010 Springer-Verlag.

The dose-effect relationship in extracorporeal shock wave therapy: the optimal parameter for extracorporeal shock wave therapy.

PubMed

Zhang, Xiongliang; Yan, Xiaoyu; Wang, Chunyang; Tang, Tingting; Chai, Yimin

2014-01-01

Extracorporeal shock wave therapy (ESWT) has been demonstrated to have the angiogenic effect on ischemic tissue. We hypothesize that ESWT exerts the proangiogenesis effect with an energy density-dependent mode on the target cells. Endothelial progenitor cells (EPCs) of rats were obtained by cultivation of bone marrow-derived mononuclear cells. EPCs were divided into five groups of different energy densities, and each group was furthermore subdivided into four groups of different shock numbers. Thus, there were 20 subgroups in total. The expressions of angiogenic factors, apoptotic factors, inflammation mediators, and chemotactic factors were examined, and the proliferation activity was measured after ESWT. When EPCs were treated with low-energy (0.04-0.13 mJ/mm(2)) shock wave, the expressions of endothelial nitric oxide synthase, angiopoietin (Ang) 1, Ang-2, and B-cell lymphoma 2 increased and those of interleukin 6, fibroblast growth factor 2, C-X-C chemokine receptor type 4, vascular endothelial growth factor a, Bcl-2-associated X protein, and caspase 3 decreased. stromal cell-derived factor 1 changed without statistical significance. When cells were treated with high-energy (0.16 mJ/mm(2)) shock wave, most of the expressions of cytokines declined except the apoptotic factors and fibroblast growth factor 2, and cells lead to apoptosis. The proliferation activity and the ratio of Ang-1/Ang-2 reached their peak values, when cells were treated with ESWT with the intensity ranging from 0.10-0.13 mJ/mm(2) and shock number ranging from 200-300 impulses. Meanwhile, a minimal value of the ratio of Bax/Bcl-2 was observed. There is a dose-effect relationship in ESWT. The shock intensity ranging from 0.10-0.13 mJ/mm(2) and shock number ranging from 200-300 impulses were the optimal parameters for ESWT to treat cells in vitro. Crown Copyright © 2014. Published by Elsevier Inc. All rights reserved.

The role of psychological factors in the perpetuation of pain intensity and disability in people with chronic shoulder pain: a systematic review

PubMed Central

Martinez-Calderon, Javier; Meeus, Mira; Struyf, Filip; Miguel Morales-Asencio, Jose; Gijon-Nogueron, Gabriel; Luque-Suarez, Alejandro

2018-01-01

Introduction Chronic shoulder pain is a very complex syndrome, and the mechanisms involved in its perpetuation remain unclear. Psychological factors appear to play a role in the perpetuation of symptoms in people with shoulder chronicity. The purpose of this systematic review is to examine the role of psychological factors in the perpetuation of symptoms (pain intensity and disability) in people with chronic shoulder pain. Methods and analysis A systematic search was performed on PubMed, AMED, CINAHL, PubPsych and EMBASE from inception to July 2017. Longitudinal studies with quantitative designs analysing the role of psychological factors on pain intensity, disability or both were included. The methodological quality of the included studies was evaluated with an adapted version of the Newcastle Ottawa Scale. The level of evidence per outcome was examined using the Grading of Recommendations Assessment, Development and Evaluation approach. Results A total of 27 articles were included with a sample of 11 176 people with chronic shoulder pain. The risk of bias ranges from 7/21 to 13/21 across the studies. The quality of the evidence was very low. High levels of self-efficacy, resilience and expectations of recovery were significantly associated with low levels of pain intensity and disability. Inversely, high levels of emotional distress, depressive symptoms, anxiety, preoperative concerns, fear-avoidance beliefs, somatisation and pain catastrophising were significantly associated with high levels of pain intensity and disability. Discussion Our results suggest that psychological factors may influence the perpetuation of pain intensity and disability, with very low evidence. A meta-analysis was not carried out due to the heterogeneity of the included studies so results should be interpreted with caution. PROSPERO trial registration number CRD42016036366. PMID:29654040

Physical Activity Levels Among Adults in Uganda: Findings From a Countrywide Cross-Sectional Survey.

PubMed

Guwatudde, David; Kirunda, Barbara E; Wesonga, Ronald; Mutungi, Gerald; Kajjura, Richard; Kasule, Hafisa; Muwonge, James; Bahendeka, Silver K

2016-09-01

Being physically active is associated with lower risk of many noncommunicable diseases (NCDs). We analyzed physical activity (PA) data collected as part of Uganda's countrywide NCD risk factor survey conducted in 2014, to describe PA levels in Uganda. PA data were collected on the domains of work, travel and leisure. We calculated the percentage of participants meeting the World Health Organization (WHO) PA recommendations, and the types of intense-specific duration of PA. Prevalence ratios (PR) were used to identify factors associated with meeting WHO PA recommendations. Of the 3987 participants, 3758 (94.3%) met the WHO PA recommendations. Work-related PA of moderate intensity, and travel-related PA contributed most to participants' overall weekly duration of PA, each contributing 49.6% and 25.2% respectively. The median weekly duration of all moderate-intensity PA was 1470 minutes (interquartile range [IQR] = 540 to 2460). Weekly duration of all vigorous-intensity PA was low with a median of 0 minutes (IQR = 0 to 1080). The median daily sedentary time was 120 minutes (IQR = 60 to 240). Factors significantly associated with meeting WHO PA recommendations were body mass index and level of education. PA levels in Uganda are high, mostly achieved through travel and work-related activities of moderate intensity.

Population heterogeneity of trait anger and differential associations of trait anger facets with borderline personality features, neuroticism, depression, Attention Deficit Hyperactivity Disorder (ADHD), and alcohol problems

PubMed Central

Lubke, Gitta H.; Ouwens, Klaasjan G.; de Moor, Marleen H.M.; Trull, Timothy J.; Boomsma, Dorret I.

2015-01-01

Anger is an emotion consisting of feelings of variable intensity ranging from mild irritation to intense fury. High levels of trait anger are associated with a range of psychiatric, interpersonal, and health problems. The objectives of this study were to explore heterogeneity of anger as measured by the Spielberger Trait Anger Scale (STAS), and to assess the association of the different anger facets with a selection of psychiatric disorders covering externalizing and internalizing problems, personality disorders, and substance use. Factor mixture models differentiated between a high and low scoring class (28% vs. 72%), and between three factors (anger-temperament, anger-reaction, and immediacy of an anger response). Whereas all psychiatric scales correlated significantly with the STAS total score, regressing the three STAS factors on psychiatric behaviors model showed a more detailed pattern. Only borderline affect instability and depression were significantly associated with all three factors in both classes whereas other problem behaviors were associated only with 1 or 2 of the factors. Alcohol problems were associated with immediacy only in the high scoring class, indicating a non-linear relation in the total sample. Taking into account these more specific associations is likely to be beneficial when investigating differential treatment strategies. PMID:26454404

Driving Forces of Dynamic Changes in Soil Erosion in the Dahei Mountain Ecological Restoration Area of Northern China Based on GIS and RS

PubMed Central

Li, Xiao; Niu, Xiang; Wang, Bing; Gao, Peng; Liu, Yu

2016-01-01

Dynamic change in soil erosion is an important focus of regional ecological restoration research. Here, the dynamic changes of soil erosion and its driving forces in the Dahei Mountain ecological restoration area of northern China were analyzed by LANDSAT TM remote sensing captured via geographic information system (GIS) technologies during three typical periods in 2004, 2008 and 2013. The results showed the following: (1) a decrease in intensive erosion and moderate erosion areas, as well as an increase in light erosion areas, was observed during two periods: one from 2004 to 2008 and the other from 2008 to 2013. (2) Between 2004 and 2008, the variation in the range of slight erosion was the largest (24.28%), followed by light erosion and intensive erosion; between 2008 and 2013, the variation in the range of intensive erosion area was the largest (9.89%), followed by slight erosion and moderate erosion. (3) Socioeconomic impact, accompanied by natural environmental factors, was the main driving force underlying the change in soil erosion within the ecological restoration area. In particular, the socioeconomic factors of per capita forest area and land reclamation rate, as well as the natural environmental factor of terrain slope, significantly influenced soil erosion changes within the ecological restoration area. PMID:26981637

Validation of the Neonatal Satisfaction Survey (NSS-8) in six Norwegian neonatal intensive care units: a quantitative cross-sectional study.

PubMed

Hagen, Inger Hilde; Svindseth, Marit Følsvik; Nesset, Erik; Orner, Roderick; Iversen, Valentina Cabral

2018-03-27

The experience of having their new-borns admitted to an intensive care unit (NICU) can be extremely distressing. Subsequent risk of post-incident-adjustment difficulties are increased for parents, siblings, and affected families. Patient and next of kin satisfaction surveys provide key indicators of quality in health care. Methodically constructed and validated survey tools are in short supply and parents' experiences of care in Neonatal Intensive Care Units is under-researched. This paper reports a validation of the Neonatal Satisfaction Survey (NSS-8) in six Norwegian NICUs. Parents' survey returns were collected using the Neonatal Satisfaction Survey (NSS-13). Data quality and psychometric properties were systematically assessed using exploratory factor analysis, tests of internal consistency, reliability, construct, convergent and discriminant validity. Each set of hospital returns were subjected to an apostasy analysis before an overall satisfaction rate was calculated. The survey sample of 568 parents represents 45% of total eligible population for the period of the study. Missing data accounted for 1,1% of all returns. Attrition analysis shows congruence between sample and total population. Exploratory factor analysis identified eight factors of concern to parents,"Care and Treatment", "Doctors", "Visits", "Information", "Facilities", "Parents' Anxiety", "Discharge" and "Sibling Visits". All factors showed satisfactory internal consistency, good reliability (Cronbach's alpha ranged from 0.70-0.94). For the whole scale of 51 items α 0.95. Convergent validity using Spearman's rank between the eight factors and question measuring overall satisfaction was significant on all factors. Discriminant validity was established for all factors. Overall satisfaction rates ranged from 86 to 90% while for each of the eight factors measures of satisfaction varied between 64 and 86%. The NSS-8 questionnaire is a valid and reliable scale for measuring parents' assessment of quality of care in NICU. Statistical analysis confirms the instrument's capacity to gauge parents' experiences of NICU. Further research is indicated to validate the survey questionnaire in other Nordic countries and beyond.

Tls Field Data Based Intensity Correction for Forest Environments

NASA Astrophysics Data System (ADS)

Heinzel, J.; Huber, M. O.

2016-06-01

Terrestrial laser scanning (TLS) is increasingly used for forestry applications. Besides the three dimensional point coordinates, the 'intensity' of the reflected signal plays an important role in forestry and vegetation studies. The benefit of the signal intensity is caused by the wavelength of the laser that is within the near infrared (NIR) for most scanners. The NIR is highly indicative for various vegetation characteristics. However, the intensity as recorded by most terrestrial scanners is distorted by both external and scanner specific factors. Since details about system internal alteration of the signal are often unknown to the user, model driven approaches are impractical. On the other hand, existing data driven calibration procedures require laborious acquisition of separate reference datasets or areas of homogenous reflection characteristics from the field data. In order to fill this gap, the present study introduces an approach to correct unwanted intensity variations directly from the point cloud of the field data. The focus is on the variation over range and sensor specific distortions. Instead of an absolute calibration of the values, a relative correction within the dataset is sufficient for most forestry applications. Finally, a method similar to time series detrending is presented with the only pre-condition of a relative equal distribution of forest objects and materials over range. Our test data covers 50 terrestrial scans captured with a FARO Focus 3D S120 scanner using a laser wavelength of 905 nm. Practical tests demonstrate that our correction method removes range and scanner based alterations of the intensity.

Competition between recombination and extraction of free charges determines the fill factor of organic solar cells

PubMed Central

Bartesaghi, Davide; Pérez, Irene del Carmen; Kniepert, Juliane; Roland, Steffen; Turbiez, Mathieu; Neher, Dieter; Koster, L. Jan Anton

2015-01-01

Among the parameters that characterize a solar cell and define its power-conversion efficiency, the fill factor is the least well understood, making targeted improvements difficult. Here we quantify the competition between charge extraction and recombination by using a single parameter θ, and we demonstrate that this parameter is directly related to the fill factor of many different bulk-heterojunction solar cells. Our finding is supported by experimental measurements on 15 different donor:acceptor combinations, as well as by drift-diffusion simulations of organic solar cells in which charge-carrier mobilities, recombination rate, light intensity, energy levels and active-layer thickness are all varied over wide ranges to reproduce typical experimental conditions. The results unify the fill factors of several very different donor:acceptor combinations and give insight into why fill factors change so much with thickness, light intensity and materials properties. To achieve fill factors larger than 0.8 requires further improvements in charge transport while reducing recombination. PMID:25947637

Performance of National Maps of Watershed Integrity at Watershed Scales

EPA Science Inventory

Watershed integrity, the capacity of a watershed to support and maintain ecological processes essential to the sustainability of services provided to society, can be influenced by a range of landscape and in-stream factors. Ecological response data from four intensively monitored...

Inactivation of Microorganisms

NASA Astrophysics Data System (ADS)

Alzamora, Stella Maris; Guerrero, Sandra N.; Schenk, Marcela; Raffellini, Silvia; López-Malo, Aurelio

Minimal processing techniques for food preservation allow better retention of product flavor, texture, color, and nutrient content than comparable conventional treatments. A wide range of novel alternative physical factors have been intensely investigated in the last two decades. These physical factors can cause inactivation of microorganisms at ambient or sublethal temperatures (e.g., high hydrostatic pressure, pulsed electric fields, ultrasound, pulsed light, and ultraviolet light). These technologies have been reported to reduce microorganism population in foods while avoiding the deleterious effects of severe heating on quality. Among technologies, high-energy ultrasound (i.e., intensities higher than 1 W/cm2, frequencies between 18 and 100 kHz) has attracted considerable interest for food preservation applications (Mason et al., 1996; Povey and Mason, 1998).

Experimental evidences for molecular origin of low-Q peak in neutron/x-ray scattering of 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide ionic liquids

NASA Astrophysics Data System (ADS)

Fujii, Kenta; Kanzaki, Ryo; Takamuku, Toshiyuki; Kameda, Yasuo; Kohara, Shinji; Kanakubo, Mitsuhiro; Shibayama, Mitsuhiro; Ishiguro, Shin-ichi; Umebayashi, Yasuhiro

2011-12-01

Short- and long-range liquid structures of [CnmIm+][TFSA-] with n = 2, 4, 6, 8, 10, and 12 have been studied by high-energy x-ray diffraction (HEXRD) and small-angle neutron scattering (SANS) experiments with the aid of MD simulations. Observed x-ray structure factor, S(Q), for the ionic liquids with the alkyl-chain length n > 6 exhibited a characteristic peak in the low-Q range of 0.2-0.4 Å -1, indicating the heterogeneity of their ionic liquids. SANS profiles IH(Q) and ID(Q) for the normal and the alkyl group deuterated ionic liquids, respectively, showed significant peaks for n = 10 and 12 without no form factor component for large spherical or spheroidal aggregates like micelles in solution. The peaks for n = 10 and 12 evidently disappeared in the difference SANS profiles ΔI(Q) [=ID(Q) - IH(Q)], although that for n = 12 slightly remained. This suggests that the long-range correlations originated from the alkyl groups hardly contribute to the low-Q peak intensity in SANS. To reveal molecular origin of the low-Q peak, we introduce here a new function; x-ray structure factor intensity at a given Q as a function of r, SQpeak(r). The SQpeak(r) function suggests that the observed low-Q peak intensity depending on n is originated from liquid structures at two r-region of 5-8 and 8-15 Å for all ionic liquids examined except for n = 12. Atomistic MD simulations are consistent with the HEXRD and SANS experiments, and then we discussed the relationship between both variations of low-Q peak and real-space structure with lengthening the alkyl group of the CnmIm.

Regional variations in health care intensity and physician perceptions of quality of care.

PubMed

Sirovich, Brenda E; Gottlieb, Daniel J; Welch, H Gilbert; Fisher, Elliott S

2006-05-02

Research has documented dramatic differences in health care utilization and spending across U.S. regions with similar levels of patient illness. Although patient outcomes and quality of care have been found to be no better in regions of high health care intensity, it is unknown whether physicians in these regions feel more capable of providing good patient care than those in low-intensity regions. To determine whether physicians in high-intensity regions feel better able to care for patients than physicians in low-intensity regions. Physician telephone survey. 51 metropolitan and 9 nonmetropolitan areas of the United States and a supplemental national sample. 10,577 physicians who provided care to adults in 1998 or 1999 were surveyed for the Community Tracking Study (response rate, 61%). The End-of-Life Expenditure Index, a measure of spending that reflects differences in the overall quantity of medical services provided rather than differences in illness or price, was used to determine health care intensity in the physicians' community. Outcomes included physicians' perceived availability of clinical services, ability to provide high-quality care to patients, and career satisfaction. Although the highest-intensity regions have substantially more hospital beds and specialists per capita, physicians in these regions reported more difficulty obtaining needed services for their patients. The proportion of physicians who felt able to obtain elective hospital admissions ranged from 50% in high-intensity regions to 64% in the lowest-intensity region (P < 0.001 for the relationship between intensity and perceived ability to obtain hospital admissions); the proportion of physicians who felt able to obtain high-quality specialist referrals ranged from 64% in high-intensity regions to 79% in low-intensity regions (P < 0.001). Compared with low-intensity regions, fewer physicians in high-intensity regions felt able to maintain good ongoing patient relationships (range, 62% to 70%; P < 0.001) or able to provide high-quality care (range, 72% to 77%; P = 0.009). In most cases, differences persisted but were attenuated in magnitude after adjustment for physician attributes, practice characteristics, and local market factors (for example, managed care penetration); the difference in perceived ability to provide high-quality care was no longer statistically significant (P = 0.099). The cross-sectional design prevented demonstration of a causal relationship between intensity and physician perceptions of quality. Despite more resources, physicians in regions of high health care intensity did not report greater ease in obtaining needed services or greater ability to provide high-quality care.

Gastro-intestinal parasite infections of Ankole cattle in an unhealthy landscape: An assessment of ecological predictors.

PubMed

Sun, Ping; Wronski, Torsten; Bariyanga, Jean D; Apio, Ann

2018-03-15

The distribution of gastro-intestinal (GI) parasites across landscapes is closely related to the spatial distribution of hosts. In GI parasites with environmental life stages, the vitality of parasites is also affected by ecological and landscape-related components of the environment. This is particularly relevant for domestic livestock species that are often kept across habitats with varying degrees of degradation, exposing them to a wide range of environmentally robust parasite species. In our study, we examined the effect of environmental and anthropogenic factors on the prevalence and intensity of GI parasites across a free-ranging stock of Ankole cattle in the Mutara rangelands of northeastern Rwanda. Prevalence and intensity of each parasite type (i.e., strongyle-type nematodes, Strongyloides spp., Moniezia spp., and Eimeria spp.) were used as dependent variables. Two fixed factors related to season and conservation-political history, together with three principal components (condensed from nine ecological variables) were used as independent covariates in a univariate General Linear Model (GLM). Major effects on the prevalence and intensity of strongyle-type nematodes and on the intensity of Eimeria spp. were found in that vegetation-related effects such as above-ground grass biomass in conjunction with a high degree of soil compaction had a negative relationship with these parasite types. These unexpected findings suggest that strongyle-type and coccidian infections increase with increasing rangeland degradation. Strongyle-type nematode prevalence and intensity were also negatively related to goat/sheep density, indicating a 'dilution effect' of GI infections between domestic livestock species. Copyright © 2018 Elsevier B.V. All rights reserved.

Sleep and adverse environmental factors in sedated mechanically ventilated pediatric intensive care patients.

PubMed

Al-Samsam, Rim H; Cullen, Pauline

2005-09-01

To document the quantity and architecture of sleep using objective electrophysiologic assessment in sedated mechanically ventilated pediatric intensive care unit patients over a 24-hr period and to investigate the effect of noise and staff interventions on sleep pattern in these subjects. Prospective observational study. Pediatric intensive care unit at a university hospital. A total of 11 patients studied between September 2000 and June 2001, with ages ranging from 3 to 21 months. All patients were intubated, mechanically ventilated, and sedated with morphine and midazolam infusions. Limited sleep polysomnograph, staff interventions, and noise levels were continuously monitored during a 24-hr period. Noise levels were consistently >48 dB(A); the highest night peak reached 103 dB(A). Staff interventions lasted for a mean of 240 (SD 90) mins in a 24-hr period. There was no significant difference in the number of interventions between day and night. Severe alterations to sleep architecture were found throughout the 24 hrs, with no diurnal variations. Active sleep was severely reduced to a mean of 3% (SD 4%; range, 0-11%) of total sleep time. There was severe sleep fragmentation as reflected by the high number (mean, 40 [SD 20]) of wake episodes. The above findings suggest a significant electrophysiologic abnormality of sleep in the pediatric intensive care unit patients. Our pediatric intensive care unit environment is characterized by both, high noise levels and frequent staff interventions. This study has several limitations and future studies are needed, with larger sample size and an attempt to manipulate the environmental factors to minimize their negative effects on sleep.

Epidemiology and risk factors analysis of elaphostrongylosis in red deer (Cervus elaphus) from Spain.

PubMed

Vicente, Joaquín; Fernández de Mera, Isabel G; Gortazar, Christian

2006-01-01

We studied the distribution and faecal shedding pattern of the first-stage larvae (L1) of Elaphostrongylus cervi (Nematoda: Protostrongylidae) in the red deer (Cervus elaphus) across Spain, where excretion was widespread. We evaluated the effects of individual, population and environmental factors on E. cervi L1 counts in 18 free-ranging red deer populations in South Central Spain. In this area, prevalence was 71.42+/-2.14% (n = 448) and mean intensity (n = 320) was 74.50+/-10.35. Aggregation of deer at water-holes was positively associated with E. cervi L1 prevalence, possibly due to spatial and temporal odds of infected gastropods, red deer and infective E. cervi L1 larvae being encountered. Prevalence increased with age, and there was also a trend towards males having higher intensities than females. A slightly decreasing age-intensity profile was identified for females, which may suggest a role of acquired immunity.

High-dose intensity cyclophosphamide, epidoxorubicin, vincristine and prednisone by shortened intervals and granulocyte colony-stimulating factor in non-Hodgkin's lymphoma: a phase II study.

PubMed Central

Pronzato, P.; Lionetto, R.; Botto, F.; Pensa, F.; Tognoni, A.

1998-01-01

Twenty patients with non-Hodgkin's lymphoma were treated with a combination of cyclophosphamide (750 mg m(-2), day 1), epidoxorubicin (60 mg m(-2), day 1), vincristine (1.4 mg m(-2), day 1) and prednisone (100 mg m(-2), days 1-5) every 14 days. Shortening of intervals was associated with the prophylactic employment of granulocyte colony-stimulating factor (G-CSF; specifically, filgrastim) administered at a dose of 300 microg subcutaneously from day 6 to day 11. The ratio between actually delivered dose intensity and planned dose intensity was 1.0 in 18 out the 20 patients. Toxicity was acceptable; response rate and survival are in the expected range. The present study demonstrated the feasibility of acceleration of chemotherapy cycles to obtain dose intensification in non-Hodgkin's lymphoma. PMID:9743300

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, C; Seduk, J; Yang, T

Purpose: A prototype actives scanning beam delivery system was designed, manufactured and installed as a part of the Korea Heavy Ion Medical Accelerator Project. The prototype system includes the most components for steering, modulating, detecting incident beam to patient. The system was installed in MC-50 cyclotron beam line and tested to extract the normal operation conditions. Methods: The commissioning process was completed by using 45 MeV of proton beam. To measure the beam position accuracy along the scanning magnet power supply current, 25 different spots were scanning and measured. The scanning results on GaF film were compared with the irradiationmore » plan. Also, the beam size variation and the intensity reduction using range shifter were measured and analyzed. The results will be used for creating a conversion factors for asymmetric behavior of scanning magnets and a dose compensation factor for longitudinal direction. Results: The results show asymmetry operations on both scanning × and y magnet. In case of scanning magnet × operation, the current to position conversion factors were measured 1.69 mm/A for positive direction and 1.74 mm/A for negative direction. The scanning magnet y operation shows 1.38mm/A and 1.48 mm/A for both directions. The size of incoming beam which was 18 mm as sigma becomes larger up to 55 mm as sigma while using 10 mm of the range shifter plate. As the beam size becomes large, the maximum intensity of the was decreased. In case of using 10 mm of range shifter, the maximum intensity was only 52% compared with no range shifter insertion. Conclusion: For the appropriate operation of the prototype active scanning system, the commissioning process were performed to measure the beam characteristics variation. The obtained results would be applied on the irradiation planning software for more precise dose delivery using the active scanning system.« less

Velocity Profile Characterization for the 5-CM Agent Fate Wind Tunnels

DTIC Science & Technology

2008-01-01

denominator in the turbulence intensity) decreases near the floor. As can be see , the turbulence intensity ranges from about 0.5 to 2% for the low...Profiles The friction velocity calculated by the above procedure is a factor of two larger than the operational profile. It is difficult to see how the...the toolbar, see Figure 5. 2. Connect appropriate length co-axial cable and probe holder to desired input channel on the IFA300 mainframe. 3. Install

Experimental Determination of the 1 Sigma(+) State Electric-Dipole-Moment Function of Carbon Monoxide up to a Large Internuclear Separation

NASA Technical Reports Server (NTRS)

Chackerian, C., Jr.; Farreng, R.; Guelachvili, G.; Rossetti, C.; Urban, W.

1984-01-01

Experimental intensity information is combined with numerically obtained vibrational wave functions in a nonlinear least squares fitting procedure to obtain the ground electronic state electric-dipole-moment function of carbon monoxide valid in the range of nuclear oscillation (0.87 to 1.01 A) of about the V = 38th vibrational level. Mechanical anharmonicity intensity factors, H, are computed from this function for delta V + = 1, 2, 3, with or = to 38.

Land development under regulation: comparison between the east and the west sides of the Cascade Range in Oregon, Washington, and California.

Treesearch

Seong-Hoo Cho; JunJie Wu; Ralph J. Alig

2005-01-01

We compare how socioeconomic factors, physical landscape, profit uncertainty, and local land use policies have affected land development on the east and west sides of the Cascade Range in Oregon, Washington, and California. It is found that the west side has more actively planned and regulated land use than the east side. Consequently, the more intense land use...

Analysis of radially cracked ring segments subject to forces and couples

NASA Technical Reports Server (NTRS)

Gross, B.; Srawley, J. E.

1977-01-01

Results of planar boundary collocation analysis are given for ring segment (C-shaped) specimens with radial cracks, subjected to combined forces and couples. Mode I stress intensity factors and crack mouth opening displacements were determined for ratios of outer to inner radius in the range 1.1 to 2.5 and ratios of crack length to segment width in the range 0.1 to 0.8.

Analysis of radially cracked ring segments subject to forces and couples

NASA Technical Reports Server (NTRS)

Gross, B.; Strawley, J. E.

1975-01-01

Results of planar boundary collocation analysis are given for ring segment (C shaped) specimens with radial cracks, subjected to combined forces and couples. Mode I stress intensity factors and crack mouth opening displacements were determined for ratios of outer to inner radius in the range 1.1 to 2.5, and ratios of crack length to segment width in the range 0.1 to 0.8.

Selectivity of end-Cretaceous marine bivalve extinctions

NASA Technical Reports Server (NTRS)

Jablonski, D.; Raup, D. M.

1995-01-01

Analyses of the end-Cretaceous or Cretaceous-Tertiary mass extinction show no selectivity of marine bivalve genera by life position (burrowing versus exposed), body size, bathymetric position on the continental shelf, or relative breadth of bathymetric range. Deposit-feeders as a group have significantly lower extinction intensities than suspension-feeders, but this pattern is due entirely to low extinction in two groups (Nuculoida and Lucinoidea), which suggests that survivorship was not simply linked to feeding mode. Geographically widespread genera have significantly lower extinction intensities than narrowly distributed genera. These results corroborate earlier work suggesting that some biotic factors that enhance survivorship during times of lesser extinction intensities are ineffectual during mass extinctions.

Determination of eye safety filter protection factors associated with retinal thermal hazard and blue light photochemical hazard for intense pulsed light sources.

PubMed

Clarkson, D McG

2006-02-21

An assessment is provided of protection factors afforded for retinal thermal hazard and blue light photochemical hazard for a range of filters used with intense pulsed light sources (IPLs). A characteristic IPL spectrum based on black body radiation at 5000 K with a low cut filter at 515 nm was identified as suitable for such estimations. Specific filters assessed included types with idealized transmission properties and also a range of types whose transmission characteristics were measured by means of a Bentham DMc150 spectroradiometer. Predicted behaviour based on these spectra is outlined which describes both the effectiveness of protection and the level of luminous transmittance afforded. The analysis showed it was possible to describe a figure of merit for a particular filter material relating the degree of protection provided and corresponding value of luminous transmittance. This consideration is important for providing users of IPL equipment with safety eyewear with adequate level of visual transmittance.

NOTE: Determination of eye safety filter protection factors associated with retinal thermal hazard and blue light photochemical hazard for intense pulsed light sources

NASA Astrophysics Data System (ADS)

McG Clarkson, D.

2006-02-01

An assessment is provided of protection factors afforded for retinal thermal hazard and blue light photochemical hazard for a range of filters used with intense pulsed light sources (IPLs). A characteristic IPL spectrum based on black body radiation at 5000 K with a low cut filter at 515 nm was identified as suitable for such estimations. Specific filters assessed included types with idealized transmission properties and also a range of types whose transmission characteristics were measured by means of a Bentham DMc150 spectroradiometer. Predicted behaviour based on these spectra is outlined which describes both the effectiveness of protection and the level of luminous transmittance afforded. The analysis showed it was possible to describe a figure of merit for a particular filter material relating the degree of protection provided and corresponding value of luminous transmittance. This consideration is important for providing users of IPL equipment with safety eyewear with adequate level of visual transmittance.

Measurement of sound emitted by flying projectiles with aeroacoustic sources

NASA Technical Reports Server (NTRS)

Cho, Y. I.; Shakkottai, P.; Harstad, K. G.; Back, L. H.

1988-01-01

Training projectiles with axisymmetric ring cavities that produce intense tones in an airstream were shot in a straight-line trajectory. A ground-based microphone was used to obtain the angular distribution of sound intensity produced from the flying projectile. Data reduction required calculation of Doppler and attenuation factors. Also, the directional sensitivity of the ground-mounted microphone was measured and used in the data reduction. A rapid angular variation of sound intensity produced from the projectile was found that can be used to plot an intensity contour map on the ground. A full-scale field test confirmed the validity of the aeroacoustic concept of producing a relatively intense whistle from the projectile, and the usefulness of short-range flight tests that yield acoustic data free of uncertainties associated with diffraction, reflection, and refraction at jet boundaries in free-jet tests.

Factors Contributing to the Off-Target Transport of Pyrethroid Insecticides From Urban Surfaces

PubMed Central

Jorgenson, Brant C.; Wissel-Tyson, Christopher; Young, Thomas M.

2013-01-01

Pyrethroid insecticides used in an urban and suburban context have been found in urban creek sediments and associated with toxicity in aquatic bioassays. The objectives of this study were to evaluate the main factors contributing to the off-target transport of pyrethroid insecticides from surfaces typical of residential landscapes. Controlled rainfall simulations over concrete, bare soil, and turf plots treated individually with pyrethroid insecticides in a suspension concentrate, an emulsifiable concentrate, or a granule formulation were conducted at different rainfall intensities and different product set-time intervals. Pyrethroid mass washoff varied by several orders of magnitude between experimental treatments. Suspension concentrate product application to concrete yielded significantly greater washoff than any other treatment; granule product application to turf yielded the least washoff. Fractional losses at 10 L of runoff ranged from 25.9% to 0.011% of pyrethroid mass applied and 10 L nominal mass losses ranged from 3,970 to 0.18 μg. Mass washoff depended principally on formulation and surface type combination and to a lesser degree set-time interval and rainfall intensity. Treatment effects were analyzed by ANOVA on main factors of formulation, surface type, and set time. Factor effects were not purely additive; a significant interaction between formulation and surface type was noted. PMID:22784034

High dynamic spectroscopy using a digital micromirror device and periodic shadowing.

PubMed

Kristensson, Elias; Ehn, Andreas; Berrocal, Edouard

2017-01-09

We present an optical solution called DMD-PS to boost the dynamic range of 2D imaging spectroscopic measurements up to 22 bits by incorporating a digital micromirror device (DMD) prior to detection in combination with the periodic shadowing (PS) approach. In contrast to high dynamic range (HDR), where the dynamic range is increased by recording several images at different exposure times, the current approach has the potential of improving the dynamic range from a single exposure and without saturation of the CCD sensor. In the procedure, the spectrum is imaged onto the DMD that selectively reduces the reflection from the intense spectral lines, allowing the signal from the weaker lines to be increased by a factor of 2⁸ via longer exposure times, higher camera gains or increased laser power. This manipulation of the spectrum can either be based on a priori knowledge of the spectrum or by first performing a calibration measurement to sense the intensity distribution. The resulting benefits in detection sensitivity come, however, at the cost of strong generation of interfering stray light. To solve this issue the Periodic Shadowing technique, which is based on spatial light modulation, is also employed. In this proof-of-concept article we describe the full methodology of DMD-PS and demonstrate - using the calibration-based concept - an improvement in dynamic range by a factor of ~100 over conventional imaging spectroscopy. The dynamic range of the presented approach will directly benefit from future technological development of DMDs and camera sensors.

Study of microstructure and fracture properties of blunt notched and sharp cracked high density polyethylene specimens.

PubMed

Pan, Huanyu; Devasahayam, Sheila; Bandyopadhyay, Sri

2017-07-21

This paper examines the effect of a broad range of crosshead speed (0.05 to 100 mm/min) and a small range of temperature (25 °C and 45 °C) on the failure behaviour of high density polyethylene (HDPE) specimens containing a) standard size blunt notch and b) standard size blunt notch plus small sharp crack - all tested in air. It was observed that the yield stress properties showed linear increase with the natural logarithm of strain rate. The stress intensity factors under blunt notch and sharp crack conditions also increased linearly with natural logarithm of the crosshead speed. The results indicate that in the practical temperature range of 25 °C and 45 °C under normal atmosphere and increasing strain rates, HDPE specimens with both blunt notches and sharp cracks possess superior fracture properties. SEM microstructure studies of fracture surfaces showed craze initiation mechanisms at lower strain rate, whilst at higher strain rates there is evidence of dimple patterns absorbing the strain energy and creating plastic deformation. The stress intensity factor and the yield strength were higher at 25 °C compared to those at 45 °C.

Population heterogeneity of trait anger and differential associations of trait anger facets with borderline personality features, neuroticism, depression, Attention Deficit Hyperactivity Disorder (ADHD), and alcohol problems.

PubMed

Lubke, Gitta H; Ouwens, Klaasjan G; de Moor, Marleen H M; Trull, Timothy J; Boomsma, Dorret I

2015-12-15

Anger is an emotion consisting of feelings of variable intensity ranging from mild irritation to intense fury. High levels of trait anger are associated with a range of psychiatric, interpersonal, and health problems. The objectives of this study were to explore heterogeneity of anger as measured by the Spielberger Trait Anger Scale (STAS), and to assess the association of the different anger facets with a selection of psychiatric disorders covering externalizing and internalizing problems, personality disorders, and substance use. Factor mixture models differentiated between a high and low scoring class (28% vs. 72%), and between three factors (anger-temperament, anger-reaction, and immediacy of an anger response). Whereas all psychiatric scales correlated significantly with the STAS total score, regressing the three STAS factors on psychiatric behaviors model showed a more detailed pattern. Only borderline affect instability and depression were significantly associated with all three factors in both classes whereas other problem behaviors were associated only with 1 or 2 of the factors. Alcohol problems were associated with immediacy only in the high scoring class, indicating a non-linear relation in the total sample. Taking into account these more specific associations is likely to be beneficial when investigating differential treatment strategies. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

A Screening-Level Approach for Comparing Risks Affecting Aquatic Ecosystem Services over Socio-Environmental Gradients

NASA Astrophysics Data System (ADS)

Harmon, T. C.; Conde, D.; Villamizar, S. R.; Reid, B.; Escobar, J.; Rusak, J.; Hoyos, N.; Scordo, F.; Perillo, G. M.; Piccolo, M. C.; Zilio, M.; Velez, M.

2015-12-01

Assessing risks to aquatic ecosystems services (ES) is challenging and time-consuming, and effective strategies for prioritizing more detailed assessment efforts are needed. We propose a screening-level risk analysis (SRA) approach that scales ES risk using socioeconomic and environmental indices to capture anthropic and climatic pressures, as well as the capacity for institutional responses to those pressures. The method considers ES within a watershed context, and uses expert input to prioritize key services and the associated pressures that threaten them. The SRA approach focuses on estimating ES risk affect factors, which are the sum of the intensity factors for all hazards or pressures affecting the ES. We estimate the pressure intensity factors in a novel manner, basing them on the nation's (i) human development (proxied by Inequality-adjusted Human Development Index, IHDI), (ii) environmental regulatory and monitoring state (Environmental Performance Index, EPI) and (iii) the current level of water stress in the watershed (baseline water stress, BWS). Anthropic intensity factors for future conditions are derived from the baseline values based on the nation's 10-year trend in IHDI and EPI; ES risks in nations with stronger records of change are rewarded more/penalized less in estimates for good/poor future management scenarios. Future climatic intensity factors are tied to water stress estimates based on two general circulation model (GCM) outcomes. We demonstrate the method for an international array of six sites representing a wide range of socio-environmental settings. The outcomes illustrate novel consequences of the scaling scheme. Risk affect factors may be greater in a highly developed region under intense climatic pressure, or in less well-developed regions due to human factors (e.g., poor environmental records). As a screening-level tool, the SRA approach offers considerable promise for ES risk comparisons among watersheds and regions so that detailed assessment, management and mitigation efforts can be effectively prioritized.

Movement Complexity and Neuromechanical Factors Affect the Entropic Half-Life of Myoelectric Signals

PubMed Central

Hodson-Tole, Emma F.; Wakeling, James M.

2017-01-01

Appropriate neuromuscular functioning is essential for survival and features underpinning motor control are present in myoelectric signals recorded from skeletal muscles. One approach to quantify control processes related to function is to assess signal variability using measures such as Sample Entropy. Here we developed a theoretical framework to simulate the effect of variability in burst duration, activation duty cycle, and intensity on the Entropic Half-Life (EnHL) in myoelectric signals. EnHLs were predicted to be <40 ms, and to vary with fluctuations in myoelectric signal amplitude and activation duty cycle. Comparison with myoelectic data from rats walking and running at a range of speeds and inclines confirmed the range of EnHLs, however, the direction of EnHL change in response to altered locomotor demand was not correctly predicted. The discrepancy reflected different associations between the ratio of the standard deviation and mean signal intensity (Ist:It¯) and duty factor in simulated and physiological data, likely reflecting additional information in the signals from the physiological data (e.g., quiescent phase content; variation in action potential shapes). EnHL could have significant value as a novel marker of neuromuscular responses to alterations in perceived locomotor task complexity and intensity. PMID:28974932

Solute–solute correlations responsible for the prepeak in structure factors of undercooled Al-rich liquids: A molecular dynamics study

DOE PAGES

Zhang, Feng; Sun, Yang; Ye, Zhuo; ...

2015-05-06

In this study, we have performed molecular dynamics simulations on a typical Al-based alloy Al 90Sm 10. The short-range and medium-range correlations of the system are reliably produced by ab initio calculations, whereas the long-range correlations are obtained with the assistance of a semi-empirical potential well-fitted to ab initio data. Our calculations show that a prepeak in the structure factor of this system emerges well above the melting temperature, and the intensity of the prepeak increases with increasing undercooling of the liquid. These results are in agreement with x-ray diffraction experiments. The interplay between the short-range order of the systemmore » originating from the large affinity between Al and Sm atoms, and the intrinsic repulsion between Sm atoms gives rise to a stronger correlation in the second peak than the first peak in the Sm–Sm partial pair correlation function (PPCF), which in turn produces the prepeak in the structure factor.« less

Effect of sex and carcass weight on sensory quality of goat meat of Cabrito Transmontano.

PubMed

Rodrigues, S; Teixeira, A

2009-02-01

The main purpose of this work was the characterization of Cabrito Transmontana goat kid carcass and meat, which is a Protected Origin Designation product. The effects of sex and carcass weight were studied. Sensory attributes of toughness, juiciness, flavor intensity, flavor quality, odor intensity, fiber presence (stringy), sweet intensity, and overall acceptability were evaluated in 60 males and females allocated to 3 carcass weight groups: 4, 6, and 8 kg. Sensory quality of meat was evaluated by a trained taste panel of 11 experts in 5 sessions. Generalized Procrustes analysis was performed, and 93% of total variability was explained by the 2 first factors (axes). Correlation between sensory traits and factors 1 and 2 allowed the factors to be renamed as toughness/aroma and juiciness/acceptability, respectively. Procrustes analysis indicated that a sex effect was detected by experts. Meat from males presented greater juiciness, flavor quality, and general acceptability than did meat from females. Cabrito Transmontano Protected Origin Designation includes animals from 4 to 9 kg of carcass weight. However, differences among them can be important, because the taste panel found differences between animals from distinct carcass weight ranges. Lighter weight carcasses were considered more tender with less flavor and odor intensity than heavier carcasses.

Moral distress, autonomy and nurse-physician collaboration among intensive care unit nurses in Italy.

PubMed

Karanikola, Maria N K; Albarran, John W; Drigo, Elio; Giannakopoulou, Margarita; Kalafati, Maria; Mpouzika, Meropi; Tsiaousis, George Z; Papathanassoglou, Elizabeth D E

2014-05-01

To explore the level of moral distress and potential associations between moral distress indices and (1) nurse-physician collaboration, (2) autonomy, (3) professional satisfaction, (4) intention to resign, and (5) workload among Italian intensive care unit nurses. Poor nurse-physician collaboration and low autonomy may limit intensive care unit nurses' ability to act on their moral decisions. A cross-sectional correlational design with a sample of 566 Italian intensive care unit nurses. The intensity of moral distress was 57.9 ± 15.6 (mean, standard deviation) (scale range: 0-84) and the frequency of occurrence was 28.4 ± 12.3 (scale range: 0-84). The mean score of the severity of moral distress was 88.0 ± 44 (scale range: 0-336). The severity of moral distress was associated with (1) nurse-physician collaboration and dissatisfaction on care decisions (r = -0.215, P < 0.001); and (2) intention to resign (r = 0.244, P < 0.0001). The frequency of occurrence of moral distress was associated with the intention of nurses to resign (r = -0. 209, P < 0.0001). Moral distress seems to be associated with the intention to resign, whereas poor nurse-physician collaboration appears to be a pivotal factor accounting for nurses' moral distress. Enhancement of nurse-physician collaboration and nurses' participation in end-of-life decisions seems to be a managerial task that could lead to the alleviation of nurses' moral distress and their retention in the profession. © 2013 John Wiley & Sons Ltd.

Immunopathology in Taenia solium neurocysticercosis.

PubMed

Fleury, A; Cardenas, G; Adalid-Peralta, L; Fragoso, G; Sciutto, E

2016-03-01

Neurocysticercosis is a clinically and radiologically heterogeneous disease, ranging from asymptomatic infection to a severe, potentially fatal clinical picture. The intensity and extension of the parasite-elicited inflammatory reaction is a key factor for such variability. The main features of the inflammatory process found in the brain and in the peripheral blood of neurocysticercosis patients will be discussed in this review, and the factors involved in its modulation will be herein presented. © 2015 John Wiley & Sons Ltd.

Protected by nature? Effects of strenuous physical exercise on FVIII activity in moderate and mild haemophilia A patients: a pilot study.

PubMed

Groen, W G; den Uijl, I E M; van der Net, J; Grobbee, D E; de Groot, Ph G; Fischer, K

2013-07-01

Increase of factor VIII activity (FVIII) after physical exercise has been reported in healthy subjects and small-scale studies in patients with coagulopathies. The aim was to study whether moderate and mild haemophilia A patients are able to increase their endogenous FVIII activity levels by physical activity. We studied changes in FVIII activity levels after high-intensity exercise in 15 haemophilia A patients, 20-39 years, eight with moderate, seven with mild haemophilia. Patients cycled until volitional exhaustion, blood samples were drawn before and 10 min after the exercise test. FVIII activity increased 2.5 times (range 1.8-7.0 times), for both severities. Absolute increases were markedly different: median 7 IU dL(-1) (range 3-9 IU dL(-1) ) in patients with moderate, compared to 15 IU dL(-1) (range 6-62 IU dL(-1) ) in mild haemophilia patients. VWF and VWFpp increased independently of severity; median 50% (range 8-123%) and median 165% (range 48-350%), respectively, reflecting acute release of VWF. These observations may be used to promote high-intensity activities before participating in sports for moderate and mild haemophilia A patients, to reduce bleeding risk. Further studies are warranted to fully appreciate the clinical significance of exercise on different levels of intensity in patients with mild and moderate haemophilia A. © 2013 John Wiley & Sons Ltd.

Comparing fuel reduction treatments for reducing wildfire size and intensity in a boreal forest landscape of northeastern China.

PubMed

Wu, Zhiwei; He, Hong S; Liu, Zhihua; Liang, Yu

2013-06-01

Fuel load is often used to prioritize stands for fuel reduction treatments. However, wildfire size and intensity are not only related to fuel loads but also to a wide range of other spatially related factors such as topography, weather and human activity. In prioritizing fuel reduction treatments, we propose using burn probability to account for the effects of spatially related factors that can affect wildfire size and intensity. Our burn probability incorporated fuel load, ignition probability, and spread probability (spatial controls to wildfire) at a particular location across a landscape. Our goal was to assess differences in reducing wildfire size and intensity using fuel-load and burn-probability based treatment prioritization approaches. Our study was conducted in a boreal forest in northeastern China. We derived a fuel load map from a stand map and a burn probability map based on historical fire records and potential wildfire spread pattern. The burn probability map was validated using historical records of burned patches. We then simulated 100 ignitions and six fuel reduction treatments to compare fire size and intensity under two approaches of fuel treatment prioritization. We calibrated and validated simulated wildfires against historical wildfire data. Our results showed that fuel reduction treatments based on burn probability were more effective at reducing simulated wildfire size, mean and maximum rate of spread, and mean fire intensity, but less effective at reducing maximum fire intensity across the burned landscape than treatments based on fuel load. Thus, contributions from both fuels and spatially related factors should be considered for each fuel reduction treatment. Published by Elsevier B.V.

[Proboscis worm, Echinorhynchus gadi (Zoega) from a relict cod of Lake Mogil'noye].

PubMed

Kulachkova, V G; Timofeeva, T A

1977-01-01

Data on the extensiveness and intensity of infection of Kildin island cod with Echinorhynchus gadi in various seasons are given. E. gadi was proved to have a one-year life cycle and Gammarus duebeni as an intermediate host in the lake. A change of the parasite generations occurs in late summer--autumn. A high extensiveness (100%) and intensity of Kildin cod infection with E. gadi depends on the feeding habits (monophagy) and narrow distribution range of the host. Infection intensity is directly correlated with the fish age. Selfregulation of the parasite quantity in the host's intenstine is an important factor affecting the existence of E. gadi population in Lake Mogilnoye.

Temperature dependence of pre-edge features in Ti K-edge XANES spectra for ATiO₃ (A = Ca and Sr), A₂TiO₄ (A = Mg and Fe), TiO₂ rutile and TiO₂ anatase.

PubMed

Hiratoko, Tatsuya; Yoshiasa, Akira; Nakatani, Tomotaka; Okube, Maki; Nakatsuka, Akihiko; Sugiyama, Kazumasa

2013-07-01

XANES (X-ray absorption near-edge structure) spectra of the Ti K-edges of ATiO3 (A = Ca and Sr), A2TiO4 (A = Mg and Fe), TiO2 rutile and TiO2 anatase were measured in the temperature range 20-900 K. Ti atoms for all samples were located in TiO6 octahedral sites. The absorption intensity invariant point (AIIP) was found to be between the pre-edge and post-edge. After the AIIP, amplitudes damped due to Debye-Waller factor effects with temperature. Amplitudes in the pre-edge region increased with temperature normally by thermal vibration. Use of the AIIP peak intensity as a standard point enables a quantitative comparison of the intensity of the pre-edge peaks in various titanium compounds over a wide temperature range.

Orientation to the Caregiver Role Among Latinas of Mexican Origin

PubMed Central

Mendez-Luck, Carolyn A.; John Geldhof, G.; Anthony, Katherine P.; Neil Steers, W.; Mangione, Carol M.; Hays, Ron D.

2016-01-01

Purpose of the Study: To develop the Caregiver Orientation Scale for Mexican-Origin Women and evaluate its psychometric properties. Design and Methods: We developed a questionnaire to measure domains of cultural orientation to the caregiver role based on formative research and on the Cultural Justifications for Caregiving Scale. We conducted a series of exploratory factor analyses (EFAs) on data collected from 163 caregivers. We estimated internal consistency reliability (Cronbach’s coefficient alpha) and assessed construct validity by estimating correlations between all latent factors and self-rated health, interview language, and weekly hours of care. Results: EFAs suggested four factors representing familism, obligation, burden, and caregiving intensity that displayed good fit (χ2 (df = 63) = 70.52, p = .24; RMSEA = .03 [90% CI: 0.00, 0.06]; comparative fit index = .99). Multi-item scales representing the four domains had coefficient alphas ranging from .68 to .86. Obligation was positively associated with burden (.46, p < .001) and intensity (.34, p < .01), which were themselves positively correlated (.63, p < .001). Familism was positively associated with obligation (.25, p < .05) yet negatively associated with burden (−.35, p < .01) and intensity (−.22, p < .05). Weekly hours of care were positively associated with burden (.26, p < .01) and intensity (.18, p < .05), whereas self-rated health and burden (−.21, p < .05) and Spanish language and intensity (−.31, p < .001) were negatively correlated. Implications: The study shows that Mexican-origin caregiver orientation is multidimensional and that caregivers may have conflicting motivations for caregiving. PMID:27342443

High-resolution depth profiling using a range-gated CMOS SPAD quanta image sensor.

PubMed

Ren, Ximing; Connolly, Peter W R; Halimi, Abderrahim; Altmann, Yoann; McLaughlin, Stephen; Gyongy, Istvan; Henderson, Robert K; Buller, Gerald S

2018-03-05

A CMOS single-photon avalanche diode (SPAD) quanta image sensor is used to reconstruct depth and intensity profiles when operating in a range-gated mode used in conjunction with pulsed laser illumination. By designing the CMOS SPAD array to acquire photons within a pre-determined temporal gate, the need for timing circuitry was avoided and it was therefore possible to have an enhanced fill factor (61% in this case) and a frame rate (100,000 frames per second) that is more difficult to achieve in a SPAD array which uses time-correlated single-photon counting. When coupled with appropriate image reconstruction algorithms, millimeter resolution depth profiles were achieved by iterating through a sequence of temporal delay steps in synchronization with laser illumination pulses. For photon data with high signal-to-noise ratios, depth images with millimeter scale depth uncertainty can be estimated using a standard cross-correlation approach. To enhance the estimation of depth and intensity images in the sparse photon regime, we used a bespoke clustering-based image restoration strategy, taking into account the binomial statistics of the photon data and non-local spatial correlations within the scene. For sparse photon data with total exposure times of 75 ms or less, the bespoke algorithm can reconstruct depth images with millimeter scale depth uncertainty at a stand-off distance of approximately 2 meters. We demonstrate a new approach to single-photon depth and intensity profiling using different target scenes, taking full advantage of the high fill-factor, high frame rate and large array format of this range-gated CMOS SPAD array.

Degradation kinetic modelling of ascorbic acid and colour intensity in pasteurised blood orange juice during storage.

PubMed

Remini, Hocine; Mertz, Christian; Belbahi, Amine; Achir, Nawel; Dornier, Manuel; Madani, Khodir

2015-04-15

The stability of ascorbic acid and colour intensity in pasteurised blood orange juice (Citrus sinensis [L.] Osbeck) during one month of storage was investigated at 4-37 °C. The effects of ascorbic acid fortification (at 100, 200 mg L(-1)) and deaeration, temperature/time storage on the kinetic behaviour were determined. Ascorbic acid was monitored by HPLC-DAD and colour intensity by spectrophotometric measurements. Degradation kinetics were best fitted by first-order reaction models for both ascorbic acid and colour intensity. Three models (Arrhenius, Eyring and Ball) were used to assess the temperature-dependent degradation. Following the Arrhenius model, activation energies were ranged from 51 to 135 kJ mol(-1) for ascorbic acid and from 49 to 99 kJ mol(-1) for colour intensity. The effect of storage temperature and deaeration are the most influent factors on kinetics degradation, while the fortification revealed no significant effect on ascorbic acid content and colour intensity. Copyright © 2014 Elsevier Ltd. All rights reserved.

Neuroprotective-Neurotrophic Effect of Endogenous Dehydroepiandrosterone Sulfate During Intense Stress Exposure

DTIC Science & Technology

2014-06-02

22 May 2014 Available online 2 June 2014 Keywords: DHEA sulfate Neurotrophin Nerve growth factor Testosterone Cortisol Stressa b s t r a c t Recent... neurotrophin salivary nerve growth factor (sNGF). In terms of total hormone output, the effect of DHEAS on sNGF was mediated by testosterone. Unlike...established criteria for causation. Published by Elsevier Inc.1. Introduction Neurotrophins are proteins found within a broad range of cell types in the

Assessment of delirium using the PRE-DELIRIC model in an intensive care unit in Argentina

PubMed Central

Sosa, Fernando Ariel; Roberti, Javier; Franco, Margarita Tovar; Kleinert, María Mercedes; Patrón, Agustina Risso; Osatnik, Javier

2018-01-01

Objective To describe the incidence of and risk factors for delirium in the intensive care unit of a tertiary care teaching hospital in Argentina and to conduct the first non-European study exploring the performance of the PREdiction of DELIRium in ICu patients (PRE-DELIRIC) model. Methods Prospective observational study in a 20-bed intensive care unit of a tertiary care teaching hospital in Buenos Aires, Argentina. The PRE-DELIRIC model was applied to 178 consecutive patients within 24 hours of admission to the intensive care unit; delirium was assessed with the Confusion Assessment Method for the Intensive Care Unit (CAM-ICU). Results The mean age was 64.3 ± 17.9 years. The median time of stay in the intensive care unit was 6 (range, 2 - 56) days. Of the total number of patients, 49/178 (27.5%) developed delirium, defined as a positive CAM-ICU assessment, during their stay in the intensive care unit. Patients in the delirium group were significantly older and had a significantly higher Acute Physiological and Chronic Health Evaluation II (APACHE II) score. The mortality rate in the intensive care unit was 14.6%; no significant difference was observed between the two groups. Predictive factors for the development of delirium were increased age, prolonged intensive care unit stay, and opioid use. The area under the curve for the PRE-DELIRIC model was 0.83 (95%CI; 0.77 - 0.90). Conclusions The observed incidence of delirium highlights the importance of this problem in the intensive care unit setting. In this first study conducted outside Europe, PRE-DELIRIC accurately predicted the development of delirium. PMID:29742219

Fatigue Assessment of Underwater CFRP-Repaired Steel Panels using Finite Element Analysis

DTIC Science & Technology

2014-09-01

hypothesized that the range in stress-intensity factor, ∆K, governs fatigue crack growth, (Paris and Erdogan 1963). The Paris law represents the...Fibre in Canada. J. C. Institute: 25-39. Paris, P., and F. Erdogan . 1963. A Critical Analysis of crack Propagation Laws. Trans. ASME, Ser. D

Study of fracture toughness of ZrO2 ceramics

NASA Astrophysics Data System (ADS)

Deryugin, Yevgeny; Narkevich, Natalya; Vlasov, Ilya; Panin, Victor; Danilenko, Igor; Schmauder, Siegfried

2017-12-01

The fracture toughness characteristics of ZrO2ceramics were determined experimentally using an original technique of wedging small-sized chevron notch specimens developed at the Institute of Strength Physics and Materials Science SB RAS (Russia) in the laboratory of physical mesomechanics of materials and non-destructive testing. Measurements have shown that inelastic displacements can be more than 22% of the total displacement of the consoles by the time of the specimen failure. The effect of the Y2O3 stabilizer on the critical stress intensity factor KIc was verified. It was shown that an increase in the Y2O3 stabilizer content from 3 to 8% significantly decreases the fracture toughness. The stress intensity factor KIc falls within the range from 5.7 to 2.35 MPa m1/2.

Theoretical study of interactions of BSA protein in a NaCl aqueous solution

NASA Astrophysics Data System (ADS)

Pellicane, Giuseppe; Cavero, Miguel

2013-03-01

Bovine Serum Albumine (BSA) aqueous solutions in the presence of NaCl are investigated for different protein concentrations and low to intermediate ionic strengths. Protein interactions are modeled via a charge-screened colloidal model, in which the range of the potential is determined by the Debye-Hückel constant. We use Monte Carlo computer simulations to calculate the structure factor, and assume an oblate ellipsoidal form factor for BSA. The theoretical scattered intensities are found in good agreement with the experimental small angle X-ray scattering intensities available in the literature. The performance of well-known integral equation closures to the Ornstein-Zernike equation, namely the mean spherical approximation, the Percus-Yevick, and the hypernetted chain equations, is also assessed with respect to computer simulation.

Estimation of Image Sensor Fill Factor Using a Single Arbitrary Image

PubMed Central

Wen, Wei; Khatibi, Siamak

2017-01-01

Achieving a high fill factor is a bottleneck problem for capturing high-quality images. There are hardware and software solutions to overcome this problem. In the solutions, the fill factor is known. However, this is an industrial secrecy by most image sensor manufacturers due to its direct effect on the assessment of the sensor quality. In this paper, we propose a method to estimate the fill factor of a camera sensor from an arbitrary single image. The virtual response function of the imaging process and sensor irradiance are estimated from the generation of virtual images. Then the global intensity values of the virtual images are obtained, which are the result of fusing the virtual images into a single, high dynamic range radiance map. A non-linear function is inferred from the original and global intensity values of the virtual images. The fill factor is estimated by the conditional minimum of the inferred function. The method is verified using images of two datasets. The results show that our method estimates the fill factor correctly with significant stability and accuracy from one single arbitrary image according to the low standard deviation of the estimated fill factors from each of images and for each camera. PMID:28335459

Intense X-ray and EUV light source

DOEpatents

Coleman, Joshua; Ekdahl, Carl; Oertel, John

2017-06-20

An intense X-ray or EUV light source may be driven by the Smith-Purcell effect. The intense light source may utilize intense electron beams and Bragg crystals. This may allow the intense light source to range from the extreme UV range up to the hard X-ray range.

Psychosocial factors partially mediate the relationship between mechanical hyperalgesia and self-reported pain.

PubMed

Mason, Kayleigh J; O'Neill, Terence W; Lunt, Mark; Jones, Anthony K P; McBeth, John

2018-01-26

Amplification of sensory signalling within the nervous system along with psychosocial factors contributes to the variation and severity of knee pain. Quantitative sensory testing (QST) is a non-invasive test battery that assesses sensory perception of thermal, pressure, mechanical and vibration stimuli used in the assessment of pain. Psychosocial factors also have an important role in explaining the occurrence of pain. The aim was to determine whether QST measures were associated with self-reported pain, and whether those associations were mediated by psychosocial factors. Participants with knee pain identified from a population-based cohort completed a tender point count and a reduced QST battery of thermal, mechanical and pressure pain thresholds, temporal summation, mechanical pain sensitivity (MPS), dynamic mechanical allodynia (DMA) and vibration detection threshold performed following the protocol by the German Research Network on Neuropathic Pain. QST assessments were performed at the most painful knee and opposite forearm (if pain-free). Participants were asked to score for their global and knee pain intensities within the past month (range 0-10), and complete questionnaire items investigating anxiety, depression, illness perceptions, pain catastrophising, and physical functioning. QST measures (independent variable) significantly correlated (Spearman's rho) with self-reported pain intensity (dependent variable) were included in structural equation models with psychosocial factors (latent mediators). Seventy-two participants were recruited with 61 participants (36 women; median age 64 years) with complete data included in subsequent analyses. Tender point count was significantly correlated with global pain intensity. DMA at the knee and MPS at the most painful knee and opposite pain-free forearm were significantly correlated with both global pain and knee pain intensities. Psychosocial factors including pain catastrophising sub-scales (rumination and helplessness) and illness perceptions (consequences and concern) were significant partial mediators of the association with global pain intensity when loaded on to a latent mediator for: tender point count [75% total effect; 95% confidence interval (CI) 22%, 100%]; MPS at the knee (49%; 12%, 86%); and DMA at the knee (63%; 5%, 100%). Latent psychosocial factors were also significant partial mediators of the association between pain intensity at the tested knee with MPS at the knee (30%; 2%, 58%), but not for DMA at the knee. Measures of mechanical hyperalgesia at the most painful knee and pain-free opposite forearm were associated with increased knee and global pain indicative of altered central processing. Psychosocial factors were significant partial mediators, highlighting the importance of the central integration of emotional processing in pain perception. Associations between mechanical hyperalgesia at the forearm and knee, psychosocial factors and increased levels of clinical global and knee pain intensity provide evidence of altered central processing as a key mechanism in knee pain, with psychological factors playing a key role in the expression of clinical pain.

Effect of Water Vapor Pressure on Fatigue Crack Growth in Al-Zn-Cu-Mg Alloy Over Wide-Range Stress Intensity Factor Loading

DTIC Science & Technology

2014-05-07

impacts: (a) crack closure, (b) transport of water vapor molecules within the fatigue crack (47], and (c) tensile stress-plastic strain range...sealed stainless steel UHV chamber. Pure water vapor was introduced from a sealed glass flask containing triply distilled water, via a precision leak...lamellar for H1 flow in a fatigue crack in steel ; specifically, flow is dominated by the low dynamic viscosity of a gas (particularly at low pressures) and

Calculated X-ray Intensities Using Monte Carlo Algorithms: A Comparison to Experimental EPMA Data

NASA Technical Reports Server (NTRS)

Carpenter, P. K.

2005-01-01

Monte Carlo (MC) modeling has been used extensively to simulate electron scattering and x-ray emission from complex geometries. Here are presented comparisons between MC results and experimental electron-probe microanalysis (EPMA) measurements as well as phi(rhoz) correction algorithms. Experimental EPMA measurements made on NIST SRM 481 (AgAu) and 482 (CuAu) alloys, at a range of accelerating potential and instrument take-off angles, represent a formal microanalysis data set that has been widely used to develop phi(rhoz) correction algorithms. X-ray intensity data produced by MC simulations represents an independent test of both experimental and phi(rhoz) correction algorithms. The alpha-factor method has previously been used to evaluate systematic errors in the analysis of semiconductor and silicate minerals, and is used here to compare the accuracy of experimental and MC-calculated x-ray data. X-ray intensities calculated by MC are used to generate a-factors using the certificated compositions in the CuAu binary relative to pure Cu and Au standards. MC simulations are obtained using the NIST, WinCasino, and WinXray algorithms; derived x-ray intensities have a built-in atomic number correction, and are further corrected for absorption and characteristic fluorescence using the PAP phi(rhoz) correction algorithm. The Penelope code additionally simulates both characteristic and continuum x-ray fluorescence and thus requires no further correction for use in calculating alpha-factors.

Influence factors and prediction of stormwater runoff of urban green space in Tianjin, China: laboratory experiment and quantitative theory model.

PubMed

Yang, Xu; You, Xue-Yi; Ji, Min; Nima, Ciren

2013-01-01

The effects of limiting factors such as rainfall intensity, rainfall duration, grass type and vegetation coverage on the stormwater runoff of urban green space was investigated in Tianjin. The prediction equation of stormwater runoff was established by the quantitative theory with the lab experimental data of soil columns. It was validated by three field experiments and the relative errors between predicted and measured stormwater runoff are 1.41, 1.52 and 7.35%, respectively. The results implied that the prediction equation could be used to forecast the stormwater runoff of urban green space. The results of range and variance analysis indicated the sequence order of limiting factors is rainfall intensity > grass type > rainfall duration > vegetation coverage. The least runoff of green land in the present study is the combination of rainfall intensity 60.0 mm/h, duration 60.0 min, grass Festuca arundinacea and vegetation coverage 90.0%. When the intensity and duration of rainfall are 60.0 mm/h and 90.0 min, the predicted volumetric runoff coefficient is 0.23 with Festuca arundinacea of 90.0% vegetation coverage. The present approach indicated that green space is an effective method to reduce stormwater runoff and the conclusions are mainly applicable to Tianjin and the semi-arid areas with main summer precipitation and long-time interval rainfalls.

A proposed cell model for multiple-occurrence regional landslide events: Implications for landslide susceptibility mapping

NASA Astrophysics Data System (ADS)

Crozier, M. J.

2017-10-01

Multiple-occurrence regional landslide events (MORLEs) consist of hundreds to thousands of shallow landslides occurring more or less simultaneously within defined areas, ranging from tens to thousands of square kilometres. While MORLEs can be triggered by rainstorms and earthquakes, this paper is confined to those landslide events triggered by rainstorms. Globally, MORLEs occur in a range of geological settings in areas of moderate to steep slopes subject to intense rainstorms. Individual landslides in rainstorm-triggered events are dominantly small, shallow debris and earth flows, and debris and earth slides involving regolith or weathered bedrock. The model used to characterise these events assumes that energy distribution within the event area is represented on the land surface by a cell structure; with maximum energy expenditure within an identifiable core and rapid dissipation concentrically away from the centre. The version of the model presented here has been developed for rainfall-triggered landslide events. It proposes that rainfall intensity can be used to determine different critical landslide response zones within the cell (referred to as core, middle, and periphery zones). These zones are most readily distinguished by two conditions: the proportion of the slope that fails and the particular type of the slope stability factor that assumes dominance in determining specific sites of landslide occurrence. The latter condition means that the power of any slope stability factor to distinguish between stable and unstable sites varies throughout the affected area in accordance with the landslide response zones within the cell; certain factors critical for determining the location of landslide sites in one part of the event area have little influence in other parts of the event area. The implication is that landslide susceptibility maps (and subsequently derived mitigation measures) based on conventional slope stability factors may have only limited validity for many events. The overall ability to predict the impact of these events and consequently the development of effective mitigation measures is limited by the ability to predict the travel path, storm centre, and intensity range within the cell structure of extreme weather systems.

Reprint of "A proposed cell model for multiple-occurrence regional landslide events: Implications for landslide susceptibility mapping"

NASA Astrophysics Data System (ADS)

Crozier, M. J.

2018-04-01

Multiple-occurrence regional landslide events (MORLEs) consist of hundreds to thousands of shallow landslides occurring more or less simultaneously within defined areas, ranging from tens to thousands of square kilometres. While MORLEs can be triggered by rainstorms and earthquakes, this paper is confined to those landslide events triggered by rainstorms. Globally, MORLEs occur in a range of geological settings in areas of moderate to steep slopes subject to intense rainstorms. Individual landslides in rainstorm-triggered events are dominantly small, shallow debris and earth flows, and debris and earth slides involving regolith or weathered bedrock. The model used to characterise these events assumes that energy distribution within the event area is represented on the land surface by a cell structure; with maximum energy expenditure within an identifiable core and rapid dissipation concentrically away from the centre. The version of the model presented here has been developed for rainfall-triggered landslide events. It proposes that rainfall intensity can be used to determine different critical landslide response zones within the cell (referred to as core, middle, and periphery zones). These zones are most readily distinguished by two conditions: the proportion of the slope that fails and the particular type of the slope stability factor that assumes dominance in determining specific sites of landslide occurrence. The latter condition means that the power of any slope stability factor to distinguish between stable and unstable sites varies throughout the affected area in accordance with the landslide response zones within the cell; certain factors critical for determining the location of landslide sites in one part of the event area have little influence in other parts of the event area. The implication is that landslide susceptibility maps (and subsequently derived mitigation measures) based on conventional slope stability factors may have only limited validity for many events. The overall ability to predict the impact of these events and consequently the development of effective mitigation measures is limited by the ability to predict the travel path, storm centre, and intensity range within the cell structure of extreme weather systems.

Effect of light Intensity and photoperiod on growth of Chlorella pyrenoidosa and CO2 Biofixation

NASA Astrophysics Data System (ADS)

Gunawan, Teuku Johar; Ikhwan, Yusni; Restuhadi, Fajar; Pato, Usman

2018-02-01

Microalgae have been viewed as one of potential solution for CO2 biofixation or CO2 sequestration. However, many factors need to be evaluated to support development of CO2 biofixation. One important environmental factor for the growth of micro algae is related with light requirement. The aim of this study was to evaluate the effect of light intensity and photoperiod on growth of Chlorellapyrenoidosa (C.pyrenoidosa) and CO2 biofixation. Experiments were carried out in 1000 mL semi batch photo bioreactors, purged continuously with air (0.034% CO2). An Experiment of Factorial Design was employed in which the light intensity was evaluated 4 level at 2000, 4000, 6000 and 8000 lux with 3 level of photo period at L/D (light /dark) 8 hours/16 hours; L/D 12 hours/12 hours and L/D 16 hours/8 hours. The result indicated that both light intensity and photo period had significant effect (p< 0.05) on growth of C. pyrenoidosa. However, the photo period showed stronger effect relative to light intensity on growth of C.pyrenoidosa within the range reviewed. The interaction between the two factors was indicative but statistically not significant. Best growth profile sustained at combination of L/D 16 hours/8 hours of photoperiod and light intensity of 8000 lux with the highest average biomass observed at 0.516 ± 0.069gr/L. An increase in CO2biofixation rate of around 2 times was also observed between highest setting (8000 lux; L/D 16/12 hours) relative to that of lowest setting (2000 lux; L/D 8/12 hours).

Sonographic analysis of the intercostal spaces for the application of high-intensity focused ultrasound therapy to the liver.

PubMed

Kim, Young-Sun; Park, Min Jung; Rhim, Hyunchul; Lee, Min Woo; Lim, Hyo Keun

2014-07-01

The purposes of this study were to assess the widths of the intercostal spaces of the right inferior human rib cage through which high-intensity focused ultrasound therapy would be applied for treating liver cancer and to elucidate the demographic factors associated with intercostal space width. From March 2013 to June 2013, the widths of the intercostal spaces and the ribs at six areas of the right inferior rib cage (area 1, lowest intercostal space on anterior axillary line and the adjacent upper rib; area 2, second-lowest intercostal space on anterior axillary line and the adjacent upper rib; areas 3 and 4, lowest and second-lowest spaces on midaxillary line; areas 5 and 6, lowest and second-lowest spaces on posterior axillary line) were sonographically measured in 466 patients (214 men, 252 women; mean age, 53.0 years) after an abdominal sonographic examination. Demographic factors and the presence or absence of chronic liver disease were evaluated by multivariate analysis to investigate which factors influence intercostal width. The width of the intercostal space was 19.7 ± 3.7 mm (range, 9-33 mm) at area 1, 18.3 ± 3.4 mm (range, 9-33 mm) at area 2, 17.4 ± 4.0 mm (range, 7-33 mm) at area 3, 15.4 ± 3.5 mm (range, 5-26 mm) at area 4, 17.2 ± 3.7 mm (range, 7-28 mm) at area 5, and 14.5 ± 3.6 mm (range, 4-26 mm) at area 6. The corresponding widths of the ribs were 15.2 ± 2.3 mm (range, 8-22 mm), 14.5 ± 2.3 mm (range, 9-22 mm), 13.2 ± 2.0 mm (range, 9-20), 14.3 ± 2.2 mm (range, 9-20 mm), 15.0 ± 2.2 mm (range, 10-22 mm), and 15.1 ± 2.3 mm (range, 8-21 mm). Only female sex was significantly associated with the narrower intercostal width at areas 1, 2, 3, and 5 (regression coefficient, 1.124-1.885; p = 0.01-0.04). There was substantial variation in the widths of the intercostal spaces of the right inferior rib cage such that the anterior and inferior aspects of the intercostal space were relatively wider. Women had significantly narrower intercostal spaces than men.

Measuring Range Anxiety: the Substitution-Emergency-Detour (SED) Method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin, Zhenhong

Range anxiety has been widely recognized as a critical barrier for battery electric vehicles (BEV), but its measurement method is lacking. Such a knowledge gap makes it difficult to analyse the competiveness of and the demand for BEVs. This study develops the Substitution-Emergency-Detour (SED) method to measure the range anxiety cost, and conducts sensitivity analysis of range anxiety cost with respect to nine factors. It is found that the most effective ways to reduce range anxiety are reducing driving intensity, increasing the vehicle range, extending the vehicle range with better charging infrastructure. Better household vehicle flexibility and less range uncertaintymore » can also significantly reduce range anxiety. The SED method and the numerical results are expected to contribute to better understanding of the range anxiety barrier and the BEV demand.« less

Crack Growth of a Titanium-Aluminide Alloy under Thermal-Mechanical Fatigue

DTIC Science & Technology

1988-12-01

the elastic-plastic fracture mechanics ( EPFM ) relations such as the J-integral or crack tip opening displacement (CTOD) must be used. Much more work...has been done in the area of LEFM, using stress intensity factor range AK as a correlating factor, than in EPFM . No matter which type of analysis is...thus obvious that a simple linear summation model such as Heil’s might not be applicable to this material. Other damage mechanisms were then investigated

Tinea cruris in children.

PubMed

Patel, Gopal A; Wiederkehr, Michael; Schwartz, Robert A

2009-09-01

Tinea cruris is an intensely pruritic fungal infection of the groin and adjacent skin. Also known as crotch rot and jock itch, it can be a troubling important entity that at times is a clinical, diagnostic, and therapeutic challenge. Predisposing factors include heat, humidity, and hyperhidrosis, common accompaniments of high school-aged athletes. Furthermore, obesity and diabetes mellitus, additional risk factors for tinea cruris, are reaching unprecedented levels in adolescents. Treatment options range from improving hygiene to topical antifungal agents and systemic antifungal agents, the latter with potentially dangerous side effects.

Orientation to the Caregiver Role Among Latinas of Mexican Origin.

PubMed

Mendez-Luck, Carolyn A; John Geldhof, G; Anthony, Katherine P; Neil Steers, W; Mangione, Carol M; Hays, Ron D

2016-12-01

To develop the Caregiver Orientation Scale for Mexican-Origin Women and evaluate its psychometric properties. We developed a questionnaire to measure domains of cultural orientation to the caregiver role based on formative research and on the Cultural Justifications for Caregiving Scale. We conducted a series of exploratory factor analyses (EFAs) on data collected from 163 caregivers. We estimated internal consistency reliability (Cronbach's coefficient alpha) and assessed construct validity by estimating correlations between all latent factors and self-rated health, interview language, and weekly hours of care. EFAs suggested four factors representing familism, obligation, burden, and caregiving intensity that displayed good fit (χ 2 (df = 63) = 70.52, p = .24; RMSEA = .03 [90% CI: 0.00, 0.06]; comparative fit index = .99). Multi-item scales representing the four domains had coefficient alphas ranging from .68 to .86. Obligation was positively associated with burden (.46, p < .001) and intensity (.34, p < .01), which were themselves positively correlated (.63, p < .001). Familism was positively associated with obligation (.25, p < .05) yet negatively associated with burden (-.35, p < .01) and intensity (-.22, p < .05). Weekly hours of care were positively associated with burden (.26, p < .01) and intensity (.18, p < .05), whereas self-rated health and burden (-.21, p < .05) and Spanish language and intensity (-.31, p < .001) were negatively correlated. The study shows that Mexican-origin caregiver orientation is multidimensional and that caregivers may have conflicting motivations for caregiving. © The Author 2016. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Nursing Intensive-Care Satisfaction Scale [NICSS]: Development and validation of a patient-centred instrument.

PubMed

Romero-García, Marta; de la Cueva-Ariza, Laura; Benito-Aracil, Llucia; Lluch-Canut, Teresa; Trujols-Albet, Joan; Martínez-Momblan, Maria Antonia; Juvé-Udina, Maria-Eulàlia; Delgado-Hito, Pilar

2018-06-01

The aim of this study was to develop and validate the Nursing Intensive-Care Satisfaction Scale to measures satisfaction with nursing care from the critical care patient's perspective. Instruments that measure satisfaction with nursing cares have been designed and validated without taking the patient's perspective into consideration. Despite the benefits and advances in measuring satisfaction with nursing care, none instrument is specifically designed to assess satisfaction in intensive care units. Instrument development. The population were all discharged patients (January 2013 - January 2015) from three Intensive Care Units of a third level hospital (N = 200). All assessment instruments were given to discharged patients and 48 hours later, to analyse the temporal stability, only the questionnaire was given again. The validation process of the scale included the analysis of internal consistency, temporal stability; validity of construct through a confirmatory factor analysis; and criterion validity. Reliability was 0.95. The intraclass correlation coefficient for the total scale was 0.83 indicating a good temporal stability. Construct validity showed an acceptable fit and factorial structure with four factors, in accordance with the theoretical model, being Consequences factor the best correlated with other factors. Criterion validity, presented a correlation between low and high (range: 0.42-0.68). The scale has been designed and validated incorporating the perspective of critical care patients. Thanks to its reliability and validity, this questionnaire can be used both in research and in clinical practice. The scale offers a possibility to assess and develop interventions to improve patient satisfaction with nursing care. © 2018 John Wiley & Sons Ltd.

Analysis of corner cracks at hole by a 3-D weight function method with stresses from finite element method

NASA Technical Reports Server (NTRS)

Zhao, W.; Newman, J. C., Jr.; Sutton, M. A.; Wu, X. R.; Shivakumar, K. N.

1995-01-01

Stress intensity factors for quarter-elliptical corner cracks emanating from a circular hole are determined using a 3-D weight function method combined with a 3-D finite element method. The 3-D finite element method is used to analyze uncracked configuration and provide stress distribution in the region where crack is to occur. Using this stress distribution as input, the 3-D weight function method is used to determine stress intensity factors. Three different loading conditions, i.e. remote tension, remote bending and wedge loading, are considered for a wide range in geometrical parameters. The significance in using 3-D uncracked stress distribution and the difference between single and double corner cracks are studied. Typical crack opening displacements are also provided. Comparisons are made with solutions available in the literature.

Factors That Influence the Efficacy of Stretching Programs for Patients With Hypomobility

PubMed Central

Jacobs, Cale A.; Sciascia, Aaron D.

2011-01-01

Context: Passive stretching exercise protocols, as part of outpatient treatment or home exercise programs, are used to improve hypomobility. Despite the cosmopolitan use of stretching exercises, little is known about the forces being applied to the joint during these routine treatments. Type of Study: Clinical review. Evidence Acquisition: Articles were identified using MEDLINE and Google Scholar databases, with searches initially limited to those articles published after 1995. Seminal articles that were referenced were also included. Results: Many factors contribute to the clinical success of a stretching program, including the frequency, intensity, and duration of the stretching exercises, as well as patient- and joint-specific factors. Conclusions: The goal of a stretching protocol is to maximize total end-range time both in the clinic and at home. Higher intensity, prolonged, and frequent stretching (10- to 15-minute bouts, 3 to 6 times per day) used as an adjunct to high-grade mobilizations may be beneficial for certain hypomobility conditions. PMID:23016052

Postpartum contraception needs of women with preterm infants in the neonatal intensive care unit.

PubMed

Leaverton, A; Lopes, V; Vohr, B; Dailey, T; Phipps, M G; Allen, R H

2016-03-01

To evaluate postpartum contraception experiences of mothers with premature infants in the neonatal intensive care unit (NICU), their knowledge of risk factors for preterm delivery and their interest in a family planning clinic located near the NICU. This is a cross-sectional survey of English or Spanish-speaking women 18 or older whose premature neonate had been in the NICU for 5 days or more in a current stable condition. A total of 95 women were interviewed at a median of 2.7 weeks postpartum (range 0.6-12.9). Approximately 75% of women were currently using or planning to use contraception, with 33% using less effective methods. Half of women reported they would obtain contraception at a family planning clinic near the NICU. Only 32% identified a short interpregnancy interval as a risk factor for preterm delivery. Lack of knowledge of short interpregnancy interval as a risk factor for a future preterm delivery highlights the need to address postpartum contraception education and provision in this high-risk population.

Search for novel contrast materials in dual-energy x-ray breast imaging using theoretical modeling of contrast-to-noise ratio

NASA Astrophysics Data System (ADS)

Karunamuni, R.; Maidment, A. D. A.

2014-08-01

Contrast-enhanced (CE) dual-energy (DE) x-ray breast imaging uses a low- and high-energy x-ray spectral pair to eliminate soft-tissue signal variation and thereby increase the detectability of exogenous imaging agents. Currently, CEDE breast imaging is performed with iodinated contrast agents. These compounds are limited by several deficiencies, including rapid clearance and poor tumor targeting ability. The purpose of this work is to identify novel contrast materials whose contrast-to-noise ratio (CNR) is comparable or superior to that of iodine in the mammographic energy range. A monoenergetic DE subtraction framework was developed to calculate the DE signal intensity resulting from the logarithmic subtraction of the low- and high-energy signal intensities. A weighting factor is calculated to remove the dependence of the DE signal on the glandularity of the breast tissue. Using the DE signal intensity and weighting factor, the CNR for materials with atomic numbers (Z) ranging from 1 to 79 are computed for energy pairs between 10 and 50 keV. A group of materials with atomic numbers ranging from 42 to 63 were identified to exhibit the highest levels of CNR in the mammographic energy range. Several of these materials have been formulated as nanoparticles for various applications but none, apart from iodine, have been investigated as CEDE breast imaging agents. Within this group of materials, the necessary dose fraction to the LE image decreases as the atomic number increases. By reducing the dose to the LE image, the DE subtraction technique will not provide an anatomical image of sufficient quality to accompany the contrast information. Therefore, materials with Z from 42 to 52 provide nearly optimal values of CNR with energy pairs and dose fractions that provide good anatomical images. This work is intended to inspire further research into new materials for optimized CEDE breast functional imaging.

Search for novel contrast materials in dual-energy x-ray breast imaging using theoretical modeling of contrast-to-noise ratio.

PubMed

Karunamuni, R; Maidment, A D A

2014-08-07

Contrast-enhanced (CE) dual-energy (DE) x-ray breast imaging uses a low- and high-energy x-ray spectral pair to eliminate soft-tissue signal variation and thereby increase the detectability of exogenous imaging agents. Currently, CEDE breast imaging is performed with iodinated contrast agents. These compounds are limited by several deficiencies, including rapid clearance and poor tumor targeting ability. The purpose of this work is to identify novel contrast materials whose contrast-to-noise ratio (CNR) is comparable or superior to that of iodine in the mammographic energy range. A monoenergetic DE subtraction framework was developed to calculate the DE signal intensity resulting from the logarithmic subtraction of the low- and high-energy signal intensities. A weighting factor is calculated to remove the dependence of the DE signal on the glandularity of the breast tissue. Using the DE signal intensity and weighting factor, the CNR for materials with atomic numbers (Z) ranging from 1 to 79 are computed for energy pairs between 10 and 50 keV. A group of materials with atomic numbers ranging from 42 to 63 were identified to exhibit the highest levels of CNR in the mammographic energy range. Several of these materials have been formulated as nanoparticles for various applications but none, apart from iodine, have been investigated as CEDE breast imaging agents. Within this group of materials, the necessary dose fraction to the LE image decreases as the atomic number increases. By reducing the dose to the LE image, the DE subtraction technique will not provide an anatomical image of sufficient quality to accompany the contrast information. Therefore, materials with Z from 42 to 52 provide nearly optimal values of CNR with energy pairs and dose fractions that provide good anatomical images. This work is intended to inspire further research into new materials for optimized CEDE breast functional imaging.

A path-dependent fatigue crack propagation model under non-proportional modes I and III loading conditions

DOE PAGES

Mei, J.; Dong, P.; Kalnaus, S.; ...

2017-07-21

It has been well established that fatigue damage process is load-path dependent under non-proportional multi-axial loading conditions. Most of studies to date have been focusing on interpretation of S-N based test data by constructing a path-dependent fatigue damage model. Our paper presents a two-parameter mixed-mode fatigue crack growth model which takes into account of crack growth dependency on both load path traversed and a maximum effective stress intensity attained in a stress intensity factor plane (e.g.,KI-KIII plane). Furthermore, by taking advantage of a path-dependent maximum range (PDMR) cycle definition (Dong et al., 2010; Wei and Dong, 2010), the two parametersmore » are formulated by introducing a moment of load path (MLP) based equivalent stress intensity factor range (ΔKNP) and a maximum effective stress intensity parameter KMax incorporating an interaction term KI·KIII. To examine the effectiveness of the proposed model, two sets of crack growth rate test data are considered. The first set is obtained as a part of this study using 304 stainless steel disk specimens subjected to three combined non-proportional modes I and III loading conditions (i.e., with a phase angle of 0°, 90°, and 180°). The second set was obtained by Feng et al. (2007) using 1070 steel disk specimens subjected to similar types of non-proportional mixed-mode conditions. Once the proposed two-parameter non-proportional mixed-mode crack growth model is used, it is shown that a good correlation can be achieved for both sets of the crack growth rate test data.« less

A path-dependent fatigue crack propagation model under non-proportional modes I and III loading conditions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mei, J.; Dong, P.; Kalnaus, S.

It has been well established that fatigue damage process is load-path dependent under non-proportional multi-axial loading conditions. Most of studies to date have been focusing on interpretation of S-N based test data by constructing a path-dependent fatigue damage model. Our paper presents a two-parameter mixed-mode fatigue crack growth model which takes into account of crack growth dependency on both load path traversed and a maximum effective stress intensity attained in a stress intensity factor plane (e.g.,KI-KIII plane). Furthermore, by taking advantage of a path-dependent maximum range (PDMR) cycle definition (Dong et al., 2010; Wei and Dong, 2010), the two parametersmore » are formulated by introducing a moment of load path (MLP) based equivalent stress intensity factor range (ΔKNP) and a maximum effective stress intensity parameter KMax incorporating an interaction term KI·KIII. To examine the effectiveness of the proposed model, two sets of crack growth rate test data are considered. The first set is obtained as a part of this study using 304 stainless steel disk specimens subjected to three combined non-proportional modes I and III loading conditions (i.e., with a phase angle of 0°, 90°, and 180°). The second set was obtained by Feng et al. (2007) using 1070 steel disk specimens subjected to similar types of non-proportional mixed-mode conditions. Once the proposed two-parameter non-proportional mixed-mode crack growth model is used, it is shown that a good correlation can be achieved for both sets of the crack growth rate test data.« less

Fatigue crack growth theory and experiment: A comparative analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sananda, K.

A number of theoretical models have been proposed in the literature which explain the second or the fourth power dependence of fatigue crack growth rate on ..delta..K, the stress intensity factor range in the Paris-Erdogan relation da/dN = C ..delta..K /SUP m/ . All of these models pertain to the intermediate range of crack growth rates where the m values are relatively low in the range of 2 to 4. The values of m for many metals and alloys can be much larger than 4 at near threshold crack growth rates or at stress intensities close to the fast fracture,more » and in some cases throughout the range of ..delta..K when the faceted mode of crack growth occurs. For such cases, the models appear to have no relevance. In this report predictions of different theoretical models are critically examined in comparison to experimentally determined crack growth rates in a MA 956, oxide dispersion strengthened alloy. Cumulative damage models predict crack growth rates reasonably well except in the range where ductile striations are observed. Lack of agreement with any particular model in this range is related to the fact that at different regions across the specimen thickness different mechanisms, either plastic blunting or cumulative damage, control the crack growth.« less

Subsurface urban heat islands in German cities.

PubMed

Menberg, Kathrin; Bayer, Peter; Zosseder, Kai; Rumohr, Sven; Blum, Philipp

2013-01-01

Little is known about the intensity and extension of subsurface urban heat islands (UHI), and the individual role of the driving factors has not been revealed either. In this study, we compare groundwater temperatures in shallow aquifers beneath six German cities of different size (Berlin, Munich, Cologne, Frankfurt, Karlsruhe and Darmstadt). It is revealed that hotspots of up to +20K often exist, which stem from very local heat sources, such as insufficiently insulated power plants, landfills or open geothermal systems. When visualizing the regional conditions in isotherm maps, mostly a concentric picture is found with the highest temperatures in the city centers. This reflects the long-term accumulation of thermal energy over several centuries and the interplay of various factors, particularly in heat loss from basements, elevated ground surface temperatures (GST) and subsurface infrastructure. As a primary indicator to quantify and compare large-scale UHI intensity the 10-90%-quantile range UHII(10-90) of the temperature distribution is introduced. The latter reveals, in comparison to annual atmospheric UHI intensities, an even more pronounced heating of the shallow subsurface. Copyright © 2012 Elsevier B.V. All rights reserved.

How Is That Done? Student Views on Resources Used outside the Engineering Classroom

ERIC Educational Resources Information Center

Maclaren, Peter

2018-01-01

While the traditional lecture remains a key feature in the teaching of mathematically intensive disciplines at a tertiary level, what students do outside class, the resources they use, and how they use them are critical factors in their success. This study reports on a survey of students studying a range of engineering subjects, giving their views…

Impact of charge transport on current–voltage characteristics and power-conversion efficiency of organic solar cells

PubMed Central

Würfel, Uli; Neher, Dieter; Spies, Annika; Albrecht, Steve

2015-01-01

This work elucidates the impact of charge transport on the photovoltaic properties of organic solar cells. Here we show that the analysis of current–voltage curves of organic solar cells under illumination with the Shockley equation results in values for ideality factor, photocurrent and parallel resistance, which lack physical meaning. Drift-diffusion simulations for a wide range of charge-carrier mobilities and illumination intensities reveal significant carrier accumulation caused by poor transport properties, which is not included in the Shockley equation. As a consequence, the separation of the quasi Fermi levels in the organic photoactive layer (internal voltage) differs substantially from the external voltage for almost all conditions. We present a new analytical model, which considers carrier transport explicitly. The model shows excellent agreement with full drift-diffusion simulations over a wide range of mobilities and illumination intensities, making it suitable for realistic efficiency predictions for organic solar cells. PMID:25907581

Numerical determination of Paris law constants for carbon steel using a two-scale model

NASA Astrophysics Data System (ADS)

Mlikota, M.; Staib, S.; Schmauder, S.; Božić, Ž.

2017-05-01

For most engineering alloys, the long fatigue crack growth under a certain stress level can be described by the Paris law. The law provides a correlation between the fatigue crack growth rate (FCGR or da/dN), the range of stress intensity factor (ΔK), and the material constants C and m. A well-established test procedure is typically used to determine the Paris law constants C and m, considering standard specimens, notched and pre-cracked. Definition of all the details necessary to obtain feasible and comparable Paris law constants are covered by standards. However, these cost-expensive tests can be replaced by appropriate numerical calculations. In this respect, this paper deals with the numerical determination of Paris law constants for carbon steel using a two-scale model. A micro-model containing the microstructure of a material is generated using the Finite Element Method (FEM) to calculate the fatigue crack growth rate at a crack tip. The model is based on the Tanaka-Mura equation. On the other side, a macro-model serves for the calculation of the stress intensity factor. The analysis yields a relationship between the crack growth rates and the stress intensity factors for defined crack lengths which is then used to determine the Paris law constants.

Adjusting central and eastern North America ground‐motion intensity measures between sites with different reference‐rock site conditions

USGS Publications Warehouse

Boore, David; Campbell, Kenneth W.

2017-01-01

Adjustment factors are provided for converting ground‐motion intensity measures between central and eastern North America (CENA) sites with different reference‐rock site conditions (VS30=760, 2000, and 3000  m/s) for moment magnitudes ranging from 2 to 8, rupture distances ranging from 2 to 1200 km, Fourier amplitude spectra (FAS) for frequencies ranging from 0.01 to 100 Hz, response spectra for periods ranging from 0.01 to 10.0 s, peak ground acceleration, and peak ground velocity. The adjustment factors are given for a wide range of the site diminution parameters (κ0) for sites with VS30=760  m/s and for a κ0 of 0.006 s for two harder rock sites. Fourteen CENA velocity profiles with VS30 values within a factor of 1.1 of 760  m/s were used to derive average FAS amplification factors as a function of frequency, which were then used in simulations of peak ground‐motion parameters and response spectra to derive the adjustment factors. The amplification function differs from that used in western North America (e.g., Campbell and Boore, 2016) in having a peak near 9 Hz, due to the resonance of motions in the relatively thin low‐velocity material over hard rock that characterizes many CENA sites with VS30 near 760  m/s. We call these B/C sites, because this velocity marks the boundary between National Earthquake Hazards Reduction Program site classes B and C (Building Seismic Safety Council, 2004). The adjustments for short‐period motions are sensitive to the value of κ0, but there are very few if any determinations of κ0 for CENA B/C sites. For this reason, we determined κ0 from multiple recordings at Pinyon Flat Observatory (PFO), California, which has a velocity‐depth profile similar to those of CENA B/C sites. The PFO and other results from the literature suggest that appropriate values of κ0 for CENA B/C sites are expected to lie between 0.01 and 0.03 s.

Adjusting central and eastern North America ground-motion intensity measures between sites with different reference-rock site conditions

USGS Publications Warehouse

Boore, David; Campbell, Kenneth W.

2017-01-01

Adjustment factors are provided for converting ground‐motion intensity measures between central and eastern North America (CENA) sites with different reference‐rock site conditions (VS30=760, 2000, and 3000  m/s) for moment magnitudes ranging from 2 to 8, rupture distances ranging from 2 to 1200 km, Fourier amplitude spectra (FAS) for frequencies ranging from 0.01 to 100 Hz, response spectra for periods ranging from 0.01 to 10.0 s, peak ground acceleration, and peak ground velocity. The adjustment factors are given for a wide range of the site diminution parameters (κ0) for sites with VS30=760  m/s and for a κ0 of 0.006 s for two harder rock sites. Fourteen CENA velocity profiles with VS30 values within a factor of 1.1 of 760  m/s were used to derive average FAS amplification factors as a function of frequency, which were then used in simulations of peak ground‐motion parameters and response spectra to derive the adjustment factors. The amplification function differs from that used in western North America (e.g., Campbell and Boore, 2016) in having a peak near 9 Hz, due to the resonance of motions in the relatively thin low‐velocity material over hard rock that characterizes many CENA sites with VS30 near 760  m/s. We call these B/C sites, because this velocity marks the boundary between National Earthquake Hazards Reduction Program site classes B and C (Building Seismic Safety Council, 2004). The adjustments for short‐period motions are sensitive to the value of κ0, but there are very few if any determinations of κ0 for CENA B/C sites. For this reason, we determined κ0from multiple recordings at Pinyon Flat Observatory (PFO), California, which has a velocity‐depth profile similar to those of CENA B/C sites. The PFO and other results from the literature suggest that appropriate values of κ0 for CENA B/C sites are expected to lie between 0.01 and 0.03 s.

Genetic influences of sports participation in Portuguese families.

PubMed

Seabra, André F; Mendonça, Denisa M; Göring, Harald H H; Thomis, Martine A; Maia, José A

2014-01-01

To estimate familial aggregation and quantify the genetic and environmental contribution to the phenotypic variation on sports participation (SP) among Portuguese families. The sample consisted of 2375 nuclear families (parents and two offspring each) from different regions of Portugal with a total of 9500 subjects. SP assessment was based on a psychometrically established questionnaire. Phenotypes used were based on the participation in sports (yes/no), intensity of sport, weekly amount of time in SP and the proportion of the year in which a sport was regularly played. Familial correlations were calculated using family correlations (FCOR) in the SAGE software. Heritability was estimated using variance-components methods implemented in Sequential Oligogenic Linkage Analysis Routines (SOLAR) software. Subjects of the same generation tend to be more similar in their SP habits than the subjects of different generations. In all SP phenotypes studied, adjusted for the effects of multiple covariates, the proportion of phenotypic variance due to additive genetic factors ranged between 40% and 50%. The proportion of variance attributable to environmental factors ranged from 50% for the participation in sports to 60% for intensity of sport. In this large population-based family study, there was significant familial aggregation on SP. These results highlight that the variation on SP phenotypes have a significant genetic contribution although environmental factors are also important in the familial resemblance of SP.

The Excess Heat Factor: A Metric for Heatwave Intensity and Its Use in Classifying Heatwave Severity

PubMed Central

Nairn, John R.; Fawcett, Robert J. B.

2014-01-01

Heatwaves represent a significant natural hazard in Australia, arguably more hazardous to human life than bushfires, tropical cyclones and floods. In the 2008/2009 summer, for example, many more lives were lost to heatwaves than to that summer’s bushfires which were among the worst in the history of the Australian nation. For many years, these other forms of natural disaster have received much greater public attention than heatwaves, although there are some signs of change. We propose a new index, called the excess heat factor (EHF) for use in Australian heatwave monitoring and forecasting. The index is based on a three-day-averaged daily mean temperature (DMT), and is intended to capture heatwave intensity as it applies to human health outcomes, although its usefulness is likely to be much broader and with potential for international applicability. The index is described and placed in a climatological context in order to derive heatwave severity. Heatwave severity, as characterised by the climatological distribution of heatwave intensity, has been used to normalise the climatological variation in heatwave intensity range across Australia. This methodology was used to introduce a pilot national heatwave forecasting service for Australia during the 2013/2014 summer. Some results on the performance of the service are presented. PMID:25546282

Peak Stress Intensity Factor Governs Crack Propagation Velocity In Crosslinked UHMWPE

PubMed Central

Sirimamilla, P. Abhiram; Furmanski, Jevan; Rimnac, Clare

2013-01-01

Ultra high molecular weight polyethylene (UHMWPE) has been successfully used as a bearing material in total joint replacement components. However, these bearing materials can fail as a result of in vivo static and cyclic loads. Crack propagation behavior in this material has been considered using the Paris relationship which relates fatigue crack growth rate, da/dN (mm/cycle) versus the stress intensity factor range, ΔK (Kmax-Kmin, MPa√m). However, recent work suggests that the crack propagation velocity of conventional UHMWPE is driven by the peak stress intensity (Kmax), not ΔK. The hypothesis of this study is that the crack propagation velocity of highly crosslinked and remelted UHMWPE is also driven by the peak stress intensity, Kmax, during cyclic loading, rather than by ΔK. To test this hypothesis, two highly crosslinked (65 kGy and 100 kGy) and remelted UHMWPE materials were examined. Frequency, waveform and R-ratio were varied between test conditions to determine the governing factor for fatigue crack propagation. It was found that the crack propagation velocity in crosslinked UHMWPE is also driven by Kmax and not ΔK, and is dependent on loading waveform and frequency in a predictable quasi-static manner. The current study supports that crack growth in crosslinked UHMWPE materials, even under cyclic loading conditions, can be described by a relationship between the velocity of crack growth, da/dt and the peak stress intensity, Kmax. The findings suggest that stable crack propagation can occur as a result of static loading only and this should be taken into consideration in design of UHMWPE total joint replacement components. PMID:23165898

Mixed mode stress-intensity-factors in mode-3 loaded middle crack tension specimen

NASA Technical Reports Server (NTRS)

Shivakumar, Kunigal N.

1992-01-01

A three dimensional stress analysis of a middle-crack tension specimen subjected to mode-3 type loading was performed using fracture mechanics based finite element code FRAC3D. Three-dimensional stress intensity factors were calculated for a range of specimen thicknesses that represent the structures used in aerospace and nuclear industries. Calculated SIF for very thick specimen (thickness-to-crack length b/a greater than or equal to 30) agreed very well with the antiplane solution in the literature. The K(sub II) stress field exists near the intersection of the crack front and free surface in a boundary-layer region covers the complete thickness of the plate and K(sub II) dominates all through the thickness. For very thin plates (b/a is less than .1), the average K(sub II) is larger than K(sub III) (about 25% for b/a = 0.1).

Study on typhoon characteristic based on bridge health monitoring system.

PubMed

Wang, Xu; Chen, Bin; Sun, Dezhang; Wu, Yinqiang

2014-01-01

Through the wind velocity and direction monitoring system installed on Jiubao Bridge of Qiantang River, Hangzhou city, Zhejiang province, China, a full range of wind velocity and direction data was collected during typhoon HAIKUI in 2012. Based on these data, it was found that, at higher observed elevation, turbulence intensity is lower, and the variation tendency of longitudinal and lateral turbulence intensities with mean wind speeds is basically the same. Gust factor goes higher with increasing mean wind speed, and the change rate obviously decreases as wind speed goes down and an inconspicuous increase occurs when wind speed is high. The change of peak factor is inconspicuous with increasing time and mean wind speed. The probability density function (PDF) of fluctuating wind speed follows Gaussian distribution. Turbulence integral scale increases with mean wind speed, and its PDF does not follow Gaussian distribution. The power spectrum of observation fluctuating velocity is in accordance with Von Karman spectrum.

Stress intensity factors for long, deep surface flaws in plates under extensional fields

NASA Technical Reports Server (NTRS)

Harms, A. E.; Smith, C. W.

1973-01-01

Using a singular solution for a part circular crack, a Taylor Series Correction Method (TSCM) was verified for extracting stress intensity factors from photoelastic data. Photoelastic experiments were then conducted on plates with part circular and flat bottomed cracks for flaw depth to thickness ratios of 0.25, 0.50 and 0.75 and for equivalent flaw depth to equivalent ellipse length values ranging from 0.066 to 0.319. Experimental results agreed well with the Smith theory but indicated that the use of the ''equivalent'' semi-elliptical flaw results was not valid for a/2c less than 0.20. Best overall agreement for the moderate (a/t approximately 0.5) to deep flaws (a/t approximatelly 0.75) and a/2c greater than 0.15 was found with a semi-empirical theory, when compared on the basis of equivalent flaw depth and area.

The NIST Detector-Based Luminous Intensity Scale

PubMed Central

Cromer, C. L.; Eppeldauer, G.; Hardis, J. E.; Larason, T. C.; Ohno, Y.; Parr, A. C.

1996-01-01

The Système International des Unités (SI) base unit for photometry, the candela, has been realized by using absolute detectors rather than absolute sources. This change in method permits luminous intensity calibrations of standard lamps to be carried out with a relative expanded uncertainty (coverage factor k = 2, and thus a 2 standard deviation estimate) of 0.46 %, almost a factor-of-two improvement. A group of eight reference photometers has been constructed with silicon photodiodes, matched with filters to mimic the spectral luminous efficiency function for photopic vision. The wide dynamic range of the photometers aid in their calibration. The components of the photometers were carefully measured and selected to reduce the sources of error and to provide baseline data for aging studies. Periodic remeasurement of the photometers indicate that a yearly recalibration is required. The design, characterization, calibration, evaluation, and application of the photometers are discussed. PMID:27805119

Landfalling Atmospheric Rivers in California—Historical and Future Impacts

NASA Astrophysics Data System (ADS)

Dettinger, M. D.; Ralph, F. M.

2014-12-01

During the past decade, a wide range of insights about the character and causes of extreme orographic precipitation in California has emerged, based on our growing understanding of the presence, mechanisms and impacts of "atmospheric rivers" (ARs) in the extratropical atmosphere. When an AR reaches and encounters the Coastal Ranges and Sierra Nevada of California, the resulting orographically driven storms are key players in many important weather, hydrologic and ecological processes in the State, including floods and floodplain inundations, droughts, groundwater recharge, and surface-water resources (see table). The intensities, storm totals, geographical distributions and impacts of AR storms in California are determined by many factors, including among the most straightforward: The numbers of ARs making landfall each year The amounts of vapor being transported by the ARs The direction of vapor transport by the AR relative to perpendiculars to the mountain ranges (for maximum uplift) The duration of AR passage overhead of a given location The temperature of an AR as a determinant of snowline altitudes The stability of the atmosphere within which the AR is embedded The closeness of the air in the AR to saturation (how much uplift is needed to drive intense precipitation) ARs are present in weather forecast models as well as in the long-range climate models used to project future climate changes in response to increasing greenhouse-gas concentrations in the atmosphere. Research into the future of ARs over California was first reported in the literature in 2011 (based on IPCC AR4 climate models) and is being extended now (to IPCC AR5 models) to assess projected changes in the full range of factors listed above with the aim of predicting how climate change will affect these important storms and their impacts in coming decades.

Gadolinium deposition in the brain: association with various GBCAs using a generalized additive model.

PubMed

Bae, Sohi; Lee, Ho-Joon; Han, Kyunghwa; Park, Yae-Won; Choi, Yoon Seong; Ahn, Sung Soo; Kim, Jinna; Lee, Seung-Koo

2017-08-01

To determine the relationship between the number of administrations of various gadolinium-based contrast agents (GBCAs) and increased T1 signal intensity in the globus pallidus (GP) and dentate nucleus (DN). This retrospective study included 122 patients who underwent double-dose GBCA-enhanced magnetic resonance imaging. Two radiologists calculated GP-to-thalamus (TH) signal intensity ratio, DN-to-pons signal intensity ratio and relative change (R change ) between the baseline and final examinations. Interobserver agreement was evaluated. The relationships between R change and several factors, including number of each GBCA administrations, were analysed using a generalized additive model. Six patients (4.9%) received linear GBCAs (mean 20.8 number of administration; range 15-30), 44 patients (36.1%) received macrocyclic GBCAs (mean 26.1; range 14-51) and 72 patients (59.0%) received both types of GBCAs (mean 31.5; range 12-65). Interobserver agreement was almost perfect (0.99; 95% CI: 0.99-0.99). R change (DN:pons) was associated with gadodiamide (p = 0.006) and gadopentetate dimeglumine (p < 0.001), but not with other GBCAs. R change (GP:TH) was not associated with GBCA administration. Previous administration of linear agents gadoiamide and gadopentetate dimeglumine is associated with increased T1 signal intensity in the DN, whereas macrocyclic GBCAs do not show an association. • Certain linear GBCAs are associated with T1 signal change in the dentate nucleus. • The signal change is related to the administration number of certain linear GBCAs. • Difference in signal change may reflect differences in stability of agents.

Phosphorus transfer in surface runoff from intensive pasture systems at various scales: a review.

PubMed

Dougherty, Warwick J; Fleming, Nigel K; Cox, Jim W; Chittleborough, David J

2004-01-01

Phosphorus transfer in runoff from intensive pasture systems has been extensively researched at a range of scales. However, integration of data from the range of scales has been limited. This paper presents a conceptual model of P transfer that incorporates landscape effects and reviews the research relating to P transfer at a range of scales in light of this model. The contribution of inorganic P sources to P transfer is relatively well understood, but the contribution of organic P to P transfer is still relatively poorly defined. Phosphorus transfer has been studied at laboratory, profile, plot, field, and watershed scales. The majority of research investigating the processes of P transfer (as distinct from merely quantifying P transfer) has been undertaken at the plot scale. However, there is a growing need to integrate data gathered at a range of scales so that more effective strategies to reduce P transfer can be identified. This has been hindered by the lack of a clear conceptual framework to describe differences in the processes of P transfer at the various scales. The interaction of hydrological (transport) factors with P source factors, and their relationship to scale, require further examination. Runoff-generating areas are highly variable, both temporally and spatially. Improvement in the understanding and identification of these areas will contribute to increased effectiveness of strategies aimed at reducing P transfers in runoff. A thorough consideration of scale effects using the conceptual model of P transfer outlined in this paper will facilitate the development of improved strategies for reducing P losses in runoff.

Stress Intensity Formulas for Three Dimensional Crack in the Vicinity of an Interface

NASA Astrophysics Data System (ADS)

Noda, Nao-Aki; Liang, Bin; Xu, Chunhui

2008-02-01

In this study, stress intensity factors are considered by using exact solutions available for cracks near an interface. The effect of crack shape on the stress intensity factors is studied with varying the aspect ratio of the cracks. Then, the stress intensity factors are expressed as formulas useful for engineering applications. The stress intensity factors for interface cracks and a crack in a functionally graded material are also discussed.

Spectral dependence of fluorescence near plasmon resonant metal nanoparticles

NASA Astrophysics Data System (ADS)

Chen, Yeechi

The optical properties of fluorophores are significantly modified when placed within the near field (0--100 nm) of plasmon resonant metal nanostructures, due to the competition between increased decay rates and "hotspots" of concentrated electric fields. The decay rates and effective electric field intensities are highly dependent on the relative position of dye and metal and the overlap between plasmon resonance and dye absorption and emission. Understanding these dependencies can greatly improve the performance of biosensing and nanophotonic devices. In this dissertation, the fluorescence intensity of organic dyes and CdSe quantum dots near single metal nanoparticles is studied as a function of the local surface plasmon resonance (LSPR) of the nanoparticle. Single metal nanoparticles have narrow, well-defined, intense local surface plasmon resonances that are tunable across the visible spectrum by changes in size and shape. First, we show that organic dyes can be self-assembled on single silver nanoprisms into known configurations by the hybridization of thiolated DNA oligomers. We correlate the fluorescence intensity of the dyes to the LSPR of the individual nanoprism to which they are attached. For each of three different organic dyes, we observe a strong correlation between the fluorescence intensity of the dye and the degree of spectral overlap with the plasmon resonance of the nanoparticle. On average, we observe the brightest fluorescence from dyes attached to metal nanoparticles that have a LSPR scattering peak 40--120 meV higher in energy than the emission peak of the fluorophore. Second, the plasmon-enhanced fluorescence from CdSe/CdS/CdZnS/ZnS core/shell quantum dots is studied near a variety of silver and gold nanoparticles. With single-particle scattering spectroscopy, the localized surface plasmon resonance spectra of single metal nanoparticles is correlated with the photoluminescence excitation (PLE) spectra of the nearby quantum dots. The PLE spectra closely track the scattering spectra of the metal nanoparticles. By taking advantage of the ability to excite quantum dots across a wide range of wavelengths while detecting a single emission wavelength, we measure an excitation enhancement factor for single metal nanoparticles. The data also provide a calculation of a lower-bound of experimentally attainable enhancement factors solely due to increased near-field excitation. This factor was found to range from ˜3 to 10 for Au spheres, Ag cubes and Ag nanoprisms.

Contract Issues in the Sale of Commercial Aircraft.

DTIC Science & Technology

1983-09-01

which will not only facilitate a sale, but also, over time, cover the m anufacturing costs . All sales are subject to intense competition frnm aircraf...capital requirements, output range over which economies of scale exist, and cost advantages for existing firms based 3n technical capability and...perforuance (izcluling factors such is noise, fuel efficiency, maintenance costs ) , ?rice, financinq assistance and post-delivery product support. An

Developing and evaluating an instrument to measure Recovery After INtensive care: the RAIN instrument.

PubMed

Bergbom, Ingegerd; Karlsson, Veronika; Ringdal, Mona

2018-01-01

Measuring and evaluating patients' recovery, following intensive care, is essential for assessing their recovery process. By using a questionnaire, which includes spiritual and existential aspects, possibilities for identifying appropriate nursing care activities may be facilitated. The study describes the development and evaluation of a recovery questionnaire and its validity and reliability. A questionnaire consisting of 30 items on a 5-point Likert scale was completed by 169 patients (103 men, 66 women), 18 years or older (m=69, SD 12.5) at 2, 6, 12 or 24 months following discharge from an ICU. An exploratory factor analysis, including a principal component analysis with orthogonal varimax rotation, was conducted. Ten initial items, with loadings below 0.40, were removed. The internal item/scale structure obtained in the principal component analysis was tested in relation to convergent and discrimination validity with a multi-trait analysis. Items consistency and reliability were assessed by Cronbach's alpha and internal item consistency. Test of scale quality, the proportion of missing values and respondents' scoring at maximum and minimum levels were also conducted. A total of 20 items in six factors - forward looking, supporting relations, existential ruminations, revaluation of life, physical and mental strength and need of social support were extracted with eigen values above one. Together, they explained 75% of the variance. The half-scale criterion showed that the proportion of incomplete scale scores ranged from 0% to 4.3%. When testing the scale's ability to differentiate between levels of the assessed concept, we found that the observed range of scale scores covered the theoretical range. Substantial proportions of respondents, who scored at the ceiling for forward looking and supporting relations and at floor for the need of social support, were found. These findings should be further investigated. The factor analysis, including discriminant validity and the mean value for the item correlations, was found to be excellent. The RAIN instrument could be used to assess recovery following intensive care. It could provide post-ICU clinics and community/primary healthcare nurses with valuable information on which areas patients may need more support.

Modelling of N2 Vegard-Kaplan and LBH emissions in the planetary atmospheres

NASA Astrophysics Data System (ADS)

Jain, Sonal Kumar; Bhardwaj, Anil

The N_{2} triplet band emissions are common features in the dayglow of Earth. Recent discoveries of N _{2} Vegard-Kaplan (VK) band emissions on Mars by SPICAM/Mars-Express and N _{2} VK and LBH band emissions on Titan by Cassini's UVIS have led planetary scientists to look for the processes governing the N _{2} triplet and singlet band emissions in different planetary atmospheres. We have developed a model to calculate N _{2} triplet and Lyman-Birge-Hopefield (LBH) band emissions in the dayglow of Venus, Mars, Titan, and Pluto. The Steady state photoelectron fluxes and volume excitation rates have been calculated using the Analytical Yield Spectra (AYS) technique. Since interstate cascading is important for triplet and singlet states of N _{2}, the population of any given level of N _{2} triplet and singlet states is calculated under statistical equilibrium considering direct excitation, cascading, and quenching effects. Relative population of all vibrational levels of each triplet and singlet states is calculated in the model. Line of sight intensities and height-integrated overhead intensities have been calculated for VK ( A(3Sigma_u^+) - X(1Sigma^+_g) ), first positive ( B(3Pi_g) - A(3Sigma^+_u) ), second positive ( C(3Pi_u) - B(3Pi_g) ), Wu-Benesch (W(3Delta_u) - B(3Pi_g) ), B '-> B, E -> B, E-> C, E-> A, and LBH (a(1Pi_g) - X(1Sigma^+_g) ) bands of N _{2}. The N _{2} VK band span wavelength range from far ultraviolet to visible, and some transitions even originate at wavelength more than 1000 nm. Our calculations show that the overhead intensity of VK bands in the wavelength range 400-800, 300-190, 200-300, and 150-200 nm are 22%, 39%, 35%, and 4% of the total VK band emission. On Titan, the calculated intensities of N _{2} VK and LBH bands in 150-190 and 120-190 nm wavelength range, respectively, are in good agreement with the Cassini-UVIS observation. On Mars, calculated intensities of N _{2} VK bands are in agreement with the SPICAM observed limb profile of N _{2} VK (0-6) when the N _{2} density in Martian upper atmosphere is reduced by a factor of 3. Calculations are also carried out on Venus using this model. Calculated intensities on Venus are about factor of 10 higher than that on Mars. On Pluto, the predicted limb intensities of N _{2} VK and LBH bands for New Horizons flyby condition peak at radial distance of 2000 km with a value of about 5 and 9.5 R, respectively for solar zenith angle 60(°) . The results will presented and discussed.

Movement behaviour within and beyond perceptual ranges in three small mammals: effects of matrix type and body mass.

PubMed

Prevedello, Jayme Augusto; Forero-Medina, Germán; Vieira, Marcus Vinícius

2010-11-01

1. For animal species inhabiting heterogeneous landscapes, the tortuosity of the dispersal path is a key determinant of the success in locating habitat patches. Path tortuosity within and beyond perceptual range must differ, and may be differently affected by intrinsic attributes of individuals and extrinsic environmental factors. Understanding how these factors interact to determine path tortuosity allows more accurate inference of successful movements between habitat patches. 2. We experimentally determined the effects of intrinsic (body mass and species identity) and extrinsic factors (distance to nearest forest fragment and matrix type) on the tortuosity of movements of three forest-dwelling didelphid marsupials, in a fragmented landscape of the Atlantic Forest, Brazil. 3. A total of 202 individuals were captured in forest fragments and released in three unsuitable matrix types (mowed pasture, abandoned pasture and manioc plantation), carrying spool-and-line devices. 4. Twenty-four models were formulated representing a priori hypotheses of major determinants of path tortuosity, grouped in three scenarios (only intrinsic factors, only extrinsic factors and models with combinations of both), and compared using a model selection approach. Models were tested separately for individuals released within the perceptual range of the species, and for individuals released beyond the perceptual range. 5. Matrix type strongly affected path tortuosity, with more obstructed matrix types hampering displacement of animals. Body mass was more important than species identity to determine path tortuosity, with larger animals moving more linearly. Increased distance to the fragment resulted in more tortuous paths, but actually reflects a threshold in perceptual range: linear paths within perceptual range, tortuous paths beyond. 6. The variables tested explained successfully path tortuosity, but only for animals released within the perceptual range. Other factors, such as wind intensity and direction of plantation rows, may be more important for individuals beyond their perceptual range. 7. Simplistic scenarios considering only intrinsic or extrinsic factors are inadequate to predict path tortuosity, and to infer dispersal success in heterogeneous landscapes. Perceptual range represents a fundamental threshold where the effects of matrix type, body mass and individual behaviour change drastically. © 2010 The Authors. Journal compilation © 2010 British Ecological Society.

Participatory evaluation of chicken health and production constraints in Ethiopia

PubMed Central

Sambo, Emmanuel; Bettridge, Judy; Dessie, Tadelle; Amare, Alemayehu; Habte, Tadiose; Wigley, Paul; Christley, Robert M.

2015-01-01

Chicken production has a major role in the economy of developing countries and backyard production is particularly important to women. Several programmes, in Ethiopia and elsewhere, have attempted to improve chicken production as a means to reduce poverty. A key constraint to chicken production identified by farmers is disease. This study used participatory rural appraisal methods to work with chicken-keepers in order to prioritise chicken diseases, place these within the context of other production constraints, and to explore perceptions of disease risk factors and biosecurity measures. The study, focused on Debre Zeit, Ethiopia, included 71 poultry keepers (41 backyard and 30 semi-intensive chicken producers). Although women played an important role in backyard production systems, semi-intensive farms were more likely to be controlled by men. Participants identified 9 constraints to production: 7 of 8 groups of backyard producers and 15/31 semi-intensive producers ranked diseases as the most important constraint to chicken production. In contrast to previous reports, farmers in both groups had considerable knowledge of diseases and of factors affecting disease risk. Both groups, but particularly semi-intensive producers, highlighted access to feed as a constraint. Many of the challenges faced by both groups were associated with difficulty accessing agricultural and veterinary inputs and expertise. Whilst many of the constraints identified by farmers could be viewed as simply technical issues to be overcome, we believe it is important to recognise the social factors underpinning what are, in reality, relatively modest technical challenges. The low involvement of women in semi-intensive production needs to be recognised by poultry development schemes. Provision needs to be made to allow access to inputs for a wide range of business models, particularly for those, such as women, who have limited access to the capital to allow them to make the jump from backyard to semi-intensive producer, and require support to slowly build up a flock into a profitable venture. PMID:25466215

Experimental optimum design and luminescence properties of NaY(Gd)(MoO4)2:Er3+ phosphors

NASA Astrophysics Data System (ADS)

Jia-Shi, Sun; Sai, Xu; Shu-Wei, Li; Lin-Lin, Shi; Zi-Hui, Zhai; Bao-Jiu, Chen

2016-06-01

Three-factor orthogonal design (OD) of Er3+/Gd3+/T (calcination temperature) is used to optimize the luminescent intensity of NaY(Gd)(MoO4)2:Er3+ phosphor. Firstly, the uniform design (UD) is introduced to explore the doping concentration range of Er3+/Gd3+. Then OD and range analysis are performed based on the results of UD to obtain the primary and secondary sequence and the best combination of Er3+, Gd3+, and T within the experimental range. The optimum sample is prepared by the high temperature solid state method. Photoluminescence excitation and emission spectra of the optimum sample are detected. The intense green emissions (530 nm and 550 nm) are observed which originate from Er3+ 2H11/2→ 4I15/2 and 4S3/2→4I15/2, respectively. Thermal effect is investigated in the optimum NaY(Gd3+)(MoO4)2:Er3+ phosphors, and the green emission intensity decreases as temperature increases. Project supported by Education Reform Fund of Dalian Maritime University, China (Grant No. 2015Y37), the Natural Science Foundation of Liaoning Province, China (Grant Nos. 2015020190 and 2014025010), the Open Fund of the State Key Laboratory on Integrated Optoelectronics, China (Grant No. IOSKL2015KF27), and the Fundamental Research Funds for the Central Universities, China (Grant No. 3132016121).

Improved Range Estimation Model for Three-Dimensional (3D) Range Gated Reconstruction

PubMed Central

Chua, Sing Yee; Guo, Ningqun; Tan, Ching Seong; Wang, Xin

2017-01-01

Accuracy is an important measure of system performance and remains a challenge in 3D range gated reconstruction despite the advancement in laser and sensor technology. The weighted average model that is commonly used for range estimation is heavily influenced by the intensity variation due to various factors. Accuracy improvement in term of range estimation is therefore important to fully optimise the system performance. In this paper, a 3D range gated reconstruction model is derived based on the operating principles of range gated imaging and time slicing reconstruction, fundamental of radiant energy, Laser Detection And Ranging (LADAR), and Bidirectional Reflection Distribution Function (BRDF). Accordingly, a new range estimation model is proposed to alleviate the effects induced by distance, target reflection, and range distortion. From the experimental results, the proposed model outperforms the conventional weighted average model to improve the range estimation for better 3D reconstruction. The outcome demonstrated is of interest to various laser ranging applications and can be a reference for future works. PMID:28872589

A Central Amygdala CRF Circuit Facilitates Learning about Weak Threats.

PubMed

Sanford, Christina A; Soden, Marta E; Baird, Madison A; Miller, Samara M; Schulkin, Jay; Palmiter, Richard D; Clark, Michael; Zweifel, Larry S

2017-01-04

Fear is a graded central motive state ranging from mild to intense. As threat intensity increases, fear transitions from discriminative to generalized. The circuit mechanisms that process threats of different intensity are not well resolved. Here, we isolate a unique population of locally projecting neurons in the central nucleus of the amygdala (CeA) that produce the neuropeptide corticotropin-releasing factor (CRF). CRF-producing neurons and CRF in the CeA are required for discriminative fear, but both are dispensable for generalized fear at high US intensities. Consistent with a role in discriminative fear, CRF neurons undergo plasticity following threat conditioning and selectively respond to threat-predictive cues. We further show that excitability of genetically isolated CRF-receptive (CRFR1) neurons in the CeA is potently enhanced by CRF and that CRFR1 signaling in the CeA is critical for discriminative fear. These findings demonstrate a novel CRF gain-control circuit and show separable pathways for graded fear processing. Copyright © 2017 Elsevier Inc. All rights reserved.

Measurement of the natHf(d,x)177Ta cross section and impact of erroneous gamma-ray intensities

NASA Astrophysics Data System (ADS)

Simonelli, F.; Abbas, K.; Bulgheroni, A.; Pommé, S.; Altzitzoglou, T.; Suliman, G.

2012-08-01

In this work, excitation functions for deuteron-induced reactions on natural hafnium have been measured in the energy range 7-17 MeV, using the stacked-foil technique. Particular attention has been paid to the reaction natHf(d,x)177Ta, because reported γ-ray intensities have been found to be in disagreement with previously published data. This discrepancy is due to an error in the 2003 ENSDF absolute γ-ray intensities of 177Hf following the decay of 177Ta, which are about a factor of three higher compared to other available data. As a consquence, some peer reviewed papers reporting on natHf(d,x)177Ta, and also on natHf(p,x) 177Ta and natW(p,x) 177Ta, need to be reviewed. An upcoming re-evaluation of the 177Ta decay data shows new significant changes in the absolute γ-ray intensities, which in turn will affect again the 177Ta producing cross sections.

[Counseling role of district nurses and district assistant nurses. A descriptive and evaluative study of the extent and intensity of counseling].

PubMed

Tiesinga, L J; Halfens, R J

1993-11-01

In nursing literature no consensus exists on the phenomenon 'counseling'. A literature search of the concept 'counseling' makes clear that it is possible to distinguish two dimensions of the concept 'counseling', namely 'range' and 'intensity' of counseling. These two dimensions are the starting point of this study. The main purpose of this study is to gain insight in the range and intensity of the counseling given by district nurses and district assistant nurses. This article aims to discover how often psychosocial nursing problems are recognized and how often nursing interventions are executed by nurses, and with how many patients this was done. The research is designed as a secondary analysis. We used data collected by Wiersma et al. (1991). The results confirm earlier research but also offer new points of view. The study confirms that counseling is an essential aspect of district nursing. Some (significant) differences were discovered between district nurses and district assistant nurses in the psychosocial care that was given. Factors like level of education, patient population and organization will probably explain the differences between the two professional groups. This aspect of the study needs further inquiry.

Characterization of Residual Stress Effects on Fatigue Crack Growth of a Friction Stir Welded Aluminum Alloy

NASA Technical Reports Server (NTRS)

Newman, John A.; Smith, Stephen W.; Seshadri, Banavara R.; James, Mark A.; Brazill, Richard L.; Schultz, Robert W.; Donald, J. Keith; Blair, Amy

2015-01-01

An on-line compliance-based method to account for residual stress effects in stress-intensity factor and fatigue crack growth property determinations has been evaluated. Residual stress intensity factor results determined from specimens containing friction stir weld induced residual stresses are presented, and the on-line method results were found to be in excellent agreement with residual stress-intensity factor data obtained using the cut compliance method. Variable stress-intensity factor tests were designed to demonstrate that a simple superposition model, summing the applied stress-intensity factor with the residual stress-intensity factor, can be used to determine the total crack-tip stress-intensity factor. Finite element, VCCT (virtual crack closure technique), and J-integral analysis methods have been used to characterize weld-induced residual stress using thermal expansion/contraction in the form of an equivalent delta T (change in local temperature during welding) to simulate the welding process. This equivalent delta T was established and applied to analyze different specimen configurations to predict residual stress distributions and associated residual stress-intensity factor values. The predictions were found to agree well with experimental results obtained using the crack- and cut-compliance methods.

Multi-factor evaluation indicator method for the risk assessment of atmospheric and oceanic hazard group due to the attack of tropical cyclones

NASA Astrophysics Data System (ADS)

Qi, Peng; Du, Mei

2018-06-01

China's southeast coastal areas frequently suffer from storm surge due to the attack of tropical cyclones (TCs) every year. Hazards induced by TCs are complex, such as strong wind, huge waves, storm surge, heavy rain, floods, and so on. The atmospheric and oceanic hazards cause serious disasters and substantial economic losses. This paper, from the perspective of hazard group, sets up a multi-factor evaluation method for the risk assessment of TC hazards using historical extreme data of concerned atmospheric and oceanic elements. Based on the natural hazard dynamic process, the multi-factor indicator system is composed of nine natural hazard factors representing intensity and frequency, respectively. Contributing to the indicator system, in order of importance, are maximum wind speed by TCs, attack frequency of TCs, maximum surge height, maximum wave height, frequency of gusts ≥ Scale 8, rainstorm intensity, maximum tidal range, rainstorm frequency, then sea-level rising rate. The first four factors are the most important, whose weights exceed 10% in the indicator system. With normalization processing, all the single-hazard factors are superposed by multiplying their weights to generate a superposed TC hazard. The multi-factor evaluation indicator method was applied to the risk assessment of typhoon-induced atmospheric and oceanic hazard group in typhoon-prone southeast coastal cities of China.

Dark-field transmission electron microscopy and the Debye-Waller factor of graphene

PubMed Central

Hubbard, William A.; White, E. R.; Dawson, Ben; Lodge, M. S.; Ishigami, Masa; Regan, B. C.

2014-01-01

Graphene's structure bears on both the material's electronic properties and fundamental questions about long range order in two-dimensional crystals. We present an analytic calculation of selected area electron diffraction from multi-layer graphene and compare it with data from samples prepared by chemical vapor deposition and mechanical exfoliation. A single layer scatters only 0.5% of the incident electrons, so this kinematical calculation can be considered reliable for five or fewer layers. Dark-field transmission electron micrographs of multi-layer graphene illustrate how knowledge of the diffraction peak intensities can be applied for rapid mapping of thickness, stacking, and grain boundaries. The diffraction peak intensities also depend on the mean-square displacement of atoms from their ideal lattice locations, which is parameterized by a Debye-Waller factor. We measure the Debye-Waller factor of a suspended monolayer of exfoliated graphene and find a result consistent with an estimate based on the Debye model. For laboratory-scale graphene samples, finite size effects are sufficient to stabilize the graphene lattice against melting, indicating that ripples in the third dimension are not necessary. PMID:25242882

Dark-field transmission electron microscopy and the Debye-Waller factor of graphene.

PubMed

Shevitski, Brian; Mecklenburg, Matthew; Hubbard, William A; White, E R; Dawson, Ben; Lodge, M S; Ishigami, Masa; Regan, B C

2013-01-15

Graphene's structure bears on both the material's electronic properties and fundamental questions about long range order in two-dimensional crystals. We present an analytic calculation of selected area electron diffraction from multi-layer graphene and compare it with data from samples prepared by chemical vapor deposition and mechanical exfoliation. A single layer scatters only 0.5% of the incident electrons, so this kinematical calculation can be considered reliable for five or fewer layers. Dark-field transmission electron micrographs of multi-layer graphene illustrate how knowledge of the diffraction peak intensities can be applied for rapid mapping of thickness, stacking, and grain boundaries. The diffraction peak intensities also depend on the mean-square displacement of atoms from their ideal lattice locations, which is parameterized by a Debye-Waller factor. We measure the Debye-Waller factor of a suspended monolayer of exfoliated graphene and find a result consistent with an estimate based on the Debye model. For laboratory-scale graphene samples, finite size effects are sufficient to stabilize the graphene lattice against melting, indicating that ripples in the third dimension are not necessary.

Demons deformable registration of CT and cone-beam CT using an iterative intensity matching approach.

PubMed

Nithiananthan, Sajendra; Schafer, Sebastian; Uneri, Ali; Mirota, Daniel J; Stayman, J Webster; Zbijewski, Wojciech; Brock, Kristy K; Daly, Michael J; Chan, Harley; Irish, Jonathan C; Siewerdsen, Jeffrey H

2011-04-01

A method of intensity-based deformable registration of CT and cone-beam CT (CBCT) images is described, in which intensity correction occurs simultaneously within the iterative registration process. The method preserves the speed and simplicity of the popular Demons algorithm while providing robustness and accuracy in the presence of large mismatch between CT and CBCT voxel values ("intensity"). A variant of the Demons algorithm was developed in which an estimate of the relationship between CT and CBCT intensity values for specific materials in the image is computed at each iteration based on the set of currently overlapping voxels. This tissue-specific intensity correction is then used to estimate the registration output for that iteration and the process is repeated. The robustness of the method was tested in CBCT images of a cadaveric head exhibiting a broad range of simulated intensity variations associated with x-ray scatter, object truncation, and/or errors in the reconstruction algorithm. The accuracy of CT-CBCT registration was also measured in six real cases, exhibiting deformations ranging from simple to complex during surgery or radiotherapy guided by a CBCT-capable C-arm or linear accelerator, respectively. The iterative intensity matching approach was robust against all levels of intensity variation examined, including spatially varying errors in voxel value of a factor of 2 or more, as can be encountered in cases of high x-ray scatter. Registration accuracy without intensity matching degraded severely with increasing magnitude of intensity error and introduced image distortion. A single histogram match performed prior to registration alleviated some of these effects but was also prone to image distortion and was quantifiably less robust and accurate than the iterative approach. Within the six case registration accuracy study, iterative intensity matching Demons reduced mean TRE to (2.5 +/- 2.8) mm compared to (3.5 +/- 3.0) mm with rigid registration. A method was developed to iteratively correct CT-CBCT intensity disparity during Demons registration, enabling fast, intensity-based registration in CBCT-guided procedures such as surgery and radiotherapy, in which CBCT voxel values may be inaccurate. Accurate CT-CBCT registration in turn facilitates registration of multimodality preoperative image and planning data to intraoperative CBCT by way of the preoperative CT, thereby linking the intraoperative frame of reference to a wealth of preoperative information that could improve interventional guidance.

The learning environment in remediation: a review.

PubMed

Cleland, Jennifer; Cilliers, Francois; van Schalkwyk, Susan

2018-02-01

The focus of this concise article is how best to support students to achieve success at medical school. Our aim is not to provide a guide to remediating under-performance in medical students. This, in our view, implies an approach that fundamentally is about quick fixes for addressing individual student deficits, such as intensive coaching of clinical skills to help a student scrape through a resit examination. Instead, we believe that student success is not solely the result of individual factors but rather relies on a complex range of factors, including the provision of a supportive environment. We drew on our knowledge of a wide range of literature related to remediation and other medical education structures and functions. Our aim was to take a different perspective on the different dimensions of 'remediation' - the structural, curricular, ideological and individual - to consider how best to provide a supportive environment for all learners to progress towards the required outcomes. Medical students are becoming increasingly diverse and medical curricula must create learning environments that support all students to thrive. Effective remediation should not be about intensive 'teaching to test' after examination failure. Rather, both the context and the individual have a role to play in ensuring the selection, teaching, assessment and feedback practices support the learning journeys of individuals. We provide guidance for faculty member development and engaging with students to help achieve this goal. Effective remediation should not be about intensive 'teaching to test' after examination failure. © 2017 John Wiley & Sons Ltd and The Association for the Study of Medical Education.

Temperature and EUV Intensity in a Coronal Prominence Cavity and Streamer

NASA Technical Reports Server (NTRS)

Kucera, T. A.; Gibson, S.E.; Schmit, D. J.; Landi, E.; Tripathi, D.

2012-01-01

We analyze the temperature and EUV line emission of a coronal cavity and surrounding streamer in terms of a morphological forward model. We use a series of iron line ratios observed with the Hinode Extreme-ultraviolet Imaging Spectrograph (EIS) on 2007 Aug. 9 to constrain temperature as a function of altitude in a morphological forward model of the streamer and cavity. We also compare model prediction of the EIS EUV line intensities and polarized brightness (pB) data from the Mauna Loa Solar Observatory (MLSO) MK4. This work builds on earlier analysis using the same model to determine geometry of and density in the same cavity and streamer. The fit to the data with altitude dependent temperature profiles indicates that both the streamer and cavity have temperatures in the range 1.4-1.7 MK. However, the cavity exhibits substantial substructure such that the altitude dependent temperature profile is not sufficient to completely model conditions in the cavity. Coronal prominence cavities are structured by magnetism so clues to this structure are to be found in their plasma properties. These temperature substructures are likely related to structures in the cavity magnetic field. Furthermore, we find that the model overestimates the line intensities by a factor of 4-10, while overestimating pB data by no more than a factor of 1.4. One possible explanation for this is that there may be a significant amount of material at temperatures outside of the range log T(K) approximately equals 5.8 - 6.7 in both the cavity and the streamer.

Absorption of laser plasma in competition with oscillation currents for a terahertz spectrum.

PubMed

Li, Xiaolu; Bai, Ya; Li, Na; Liu, Peng

2018-01-01

We generate terahertz radiation in a supersonic jet of nitrogen molecules pumped by intense two-color laser pulses. The tuning of terahertz spectra from blue shift to red shift is observed by increasing laser power and stagnation pressure, and the red shift range is enlarged with the increased stagnation pressure. Our simulation reveals that the plasma absorption of the oscillation currents and expanded plasma column owing to increased laser intensity and gas number density are crucial factors in the recurrence of the red shift of terahertz spectra. The findings disclose the microscopic mechanism of terahertz radiation and present a controlling knob for the manipulation of a broadband terahertz spectrum from laser plasma.

A Range Ambiguity Suppression Processing Method for Spaceborne SAR with Up and Down Chirp Modulation.

PubMed

Wen, Xuejiao; Qiu, Xiaolan; Han, Bing; Ding, Chibiao; Lei, Bin; Chen, Qi

2018-05-07

Range ambiguity is one of the factors which affect the SAR image quality. Alternately transmitting up and down chirp modulation pulses is one of the methods used to suppress the range ambiguity. However, the defocusing range ambiguous signal can still hold the stronger backscattering intensity than the mainlobe imaging area in some case, which has a severe impact on visual effects and subsequent applications. In this paper, a novel hybrid range ambiguity suppression method for up and down chirp modulation is proposed. The method can obtain the ambiguity area image and reduce the ambiguity signal power appropriately, by applying pulse compression using a contrary modulation rate and CFAR detecting method. The effectiveness and correctness of the approach is demonstrated by processing the archive images acquired by Chinese Gaofen-3 SAR sensor in full-polarization mode.

Factors potentially associated with the decision of admission to the intensive care unit in a middle-income country: a survey of Brazilian physicians.

PubMed

Ramos, João Gabriel Rosa; Passos, Rogerio da Hora; Baptista, Paulo Benigno Pena; Forte, Daniel Neves

2017-01-01

To evaluate the factors potentially associated with the decision of admission to the intensive care unit in Brazil. An electronic survey of Brazilian physicians working in intensive care units. Fourteen variables that were potentially associated with the decision of admission to the intensive care unit were rated as important (from 1 to 5) by the respondents and were later grouped as "patient-related," "scarcity-related" and "administrative-related" factors. The workplace and physician characteristics were evaluated for correlation with the factor ratings. During the study period, 125 physicians completed the survey. The scores on patient-related factors were rated higher on their potential to affect decisions than scarcity-related or administrative-related factors, with a mean ± SD of 3.42 ± 0.7, 2.75 ± 0.7 and 2.87 ± 0.7, respectively (p < 0.001). The patient's underlying illness prognosis was rated by 64.5% of the physicians as always or frequently affecting decisions, followed by acute illness prognosis (57%), number of intensive care unit beds available (56%) and patient's wishes (53%). After controlling for confounders, receiving specific training on intensive care unit triage was associated with higher ratings of the patient-related factors and scarcity-related factors, while working in a public intensive care unit (as opposed to a private intensive care unit) was associated with higher ratings of the scarcity-related factors. Patient-related factors were more frequently rated as potentially affecting intensive care unit admission decisions than scarcity-related or administrative-related factors. Physician and workplace characteristics were associated with different factor ratings.

Factors potentially associated with the decision of admission to the intensive care unit in a middle-income country: a survey of Brazilian physicians

PubMed Central

Ramos, João Gabriel Rosa; Passos, Rogerio da Hora; Baptista, Paulo Benigno Pena; Forte, Daniel Neves

2017-01-01

Objective To evaluate the factors potentially associated with the decision of admission to the intensive care unit in Brazil. Methods An electronic survey of Brazilian physicians working in intensive care units. Fourteen variables that were potentially associated with the decision of admission to the intensive care unit were rated as important (from 1 to 5) by the respondents and were later grouped as "patient-related," "scarcity-related" and "administrative-related" factors. The workplace and physician characteristics were evaluated for correlation with the factor ratings. Results During the study period, 125 physicians completed the survey. The scores on patient-related factors were rated higher on their potential to affect decisions than scarcity-related or administrative-related factors, with a mean ± SD of 3.42 ± 0.7, 2.75 ± 0.7 and 2.87 ± 0.7, respectively (p < 0.001). The patient's underlying illness prognosis was rated by 64.5% of the physicians as always or frequently affecting decisions, followed by acute illness prognosis (57%), number of intensive care unit beds available (56%) and patient's wishes (53%). After controlling for confounders, receiving specific training on intensive care unit triage was associated with higher ratings of the patient-related factors and scarcity-related factors, while working in a public intensive care unit (as opposed to a private intensive care unit) was associated with higher ratings of the scarcity-related factors. Conclusions Patient-related factors were more frequently rated as potentially affecting intensive care unit admission decisions than scarcity-related or administrative-related factors. Physician and workplace characteristics were associated with different factor ratings. PMID:28977256

Predictive Associations of Music, Anxiety, and Sedative Exposure on Mechanical Ventilation Weaning Trials

PubMed Central

Hetland, Breanna; Lindquist, Ruth; Weinert, Craig R.; Peden-McAlpine, Cynthia; Savik, Kay; Chlan, Linda

2017-01-01

Background Weaning from mechanical ventilation requires increased respiratory effort, which can heighten anxiety and later prolong the need for mechanical ventilation. Objectives To examine the predictive associations of music intervention, anxiety, sedative exposure, and patients’ characteristics on time to initiation and duration of weaning trials of patients receiving mechanical ventilation. Methods A descriptive, correlational design was used for a secondary analysis of data from a randomized trial. Music listening was defined as self-initiated, patient-directed music via headphones. Anxiety was measured daily with a visual analog scale. Sedative exposure was operationalized as a daily sedation intensity score and a sedative dose frequency. Analyses consisted of descriptive statistics, graphing, survival analysis, Cox proportional hazards regression, and linear regression. Results Of 307 patients, 52% were women and 86% were white. Mean age was 59.3 (SD, 14.4) years, mean Acute Physiology and Chronic Health Evaluation III score was 62.9 (SD, 21.6), mean duration of ventilatory support was 8 (range, 1–52) days, and mean stay in the intensive care unit was 18 (range, 2–71) days. Music listening, anxiety levels, and sedative exposure did not influence time to initial weaning trial or duration of trials. Clinical factors of illness severity, days of weaning trials, and tracheostomy placement influenced weaning patterns in this sample. Conclusions Prospective studies of music intervention and other psychophysiological factors during weaning from mechanical ventilation are needed to better understand factors that promote successful weaning. PMID:28461543

Coupling efficiency of laser beam to multimode fiber

NASA Astrophysics Data System (ADS)

Niu, Jinfu; Xu, Jianqiu

2007-06-01

The coupling efficiency of laser beam to multimode fiber is given by geometrical optics, and the relation between the maximum coupling efficiency and the beam propagation factor M2 is analyzed. An equivalent factor MF2 for the multimode fiber is introduced to characterize the fiber coupling capability. The coupling efficiency of laser beam to multimode fiber is calculated in respect of the ratio M2/MF2 by the overlapping integral theory. The optimal coupling efficiency can be roughly estimated by the ratio of M2 to MF2 but with a large error range. The deviation comes from the lacks of information on the detail of phase and intensity profile in the beam factor M2.

Determination of loblolly pine response to cultural treatments based on soil class, base productivity, and competition level

Treesearch

David Garrett; Michael Kane; Daniel Markewitz; Dehai Zhao

2015-01-01

The objective of this research is to better understand what factors drive loblolly pine (Pinus taeda L.) growth response to intensive culture in the University of Georgia Plantation Management Research Cooperative’s Culture x Density study in the Piedmont and Upper Coastal Plain. Twenty study sites were established ranging from southern Alabama to South Carolina in...

Subcellular Responses to Narrowband and Wideband Radiofrequency Radiation

DTIC Science & Technology

2008-02-15

nanosecond pulses. This release is most likely also due to subcellular electromanipulation. Platelets are rich in alpha granule growth factors (i.e. platelet ... platelets (for advanced wound healing), and e) has opened the possibility of using antennas with intense electrical pulses in the subnanosecond range...development. The results of this study show that an increase in plasma membrane conductivity occurs within a few nanoseconds (less than the temporal

Effects of GPS sampling intensity on home range analyses

Treesearch

Jeffrey J. Kolodzinski; Lawrence V. Tannenbaum; David A. Osborn; Mark C. Conner; W. Mark Ford; Karl V. Miller

2010-01-01

The two most common methods for determining home ranges, minimum convex polygon (MCP) and kernel analyses, can be affected by sampling intensity. Despite prior research, it remains unclear how high-intensity sampling regimes affect home range estimations. We used datasets from 14 GPS-collared, white-tailed deer (Odocoileus virginianus) to describe...

33 CFR 86.05 - Sound signal intensity and range of audibility.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 1 2012-07-01 2012-07-01 false Sound signal intensity and range... HOMELAND SECURITY INLAND NAVIGATION RULES ANNEX III: TECHNICAL DETAILS OF SOUND SIGNAL APPLIANCES Whistles § 86.05 Sound signal intensity and range of audibility. A whistle on a vessel shall provide, in the...

33 CFR 86.05 - Sound signal intensity and range of audibility.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 1 2014-07-01 2014-07-01 false Sound signal intensity and range... HOMELAND SECURITY INLAND NAVIGATION RULES ANNEX III: TECHNICAL DETAILS OF SOUND SIGNAL APPLIANCES Whistles § 86.05 Sound signal intensity and range of audibility. A whistle on a vessel shall provide, in the...

33 CFR 86.05 - Sound signal intensity and range of audibility.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 1 2013-07-01 2013-07-01 false Sound signal intensity and range... HOMELAND SECURITY INLAND NAVIGATION RULES ANNEX III: TECHNICAL DETAILS OF SOUND SIGNAL APPLIANCES Whistles § 86.05 Sound signal intensity and range of audibility. A whistle on a vessel shall provide, in the...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Valiev, R.Z.; Islamgaliev, R.K.; Kuzmina, N.F.

Intense plastic straining techniques such as torsion straining and equal channel angular (ECA) pressing are processing procedures which may be used to make beneficial changes in the properties of materials through a substantial refinement in the microstructure. Although intense plastic straining procedures have been used for grain refinement in numerous experiments reported over the last decade, there appears to have been no investigations in which these procedures were used with metal matrix composites. The present paper describes a series of experiments in which torsion straining and ECA pressing were applied to an Al-6061 metal matrix composite reinforced with 10 volumemore » % of Al{sub 2}O{sub 3} particulates. As will be demonstrated, intense plastic straining has the potential for both reducing the grain size of the composite to the submicrometer level and increasing the strength at room temperature by a factor in the range of {approximately}2 to {approximately}3.« less

Light-induced biophotonic emission from plant tissues.

PubMed

Bajpai, R P; Bajpai, P K

1992-07-01

The emission of biophotons in the visible range, following a delay time of 2-200 seconds after exposure to light, has been measured in germinating seeds, roots, flowers, leaves, and cells. It was found that the biophotonic signals are reproducible and light-induced. The observed signals from germinating seeds of Phaseolus aures and decaying leaves of Eucalyptus are presented to show that the signals have characteristic kinetics and intensity. The kinetics of the signal was found to be independent of the stage of growth or decay, though its intensity varied with biological factors. The kinetics in the first minute is characterized by a single exponential decay term while that in the region t less than or equal to 200 s is characterized by two exponentials. The variation in the intensity of the signal with mass, state of hydration, and growth, and the effect of inhibitors in various systems (e.g. leaves, lichen, Chlorella) are reported.

Improving understanding of the underlying physical process of sediment wash-off from urban road surfaces

NASA Astrophysics Data System (ADS)

Muthusamy, Manoranjan; Tait, Simon; Schellart, Alma; Beg, Md Nazmul Azim; Carvalho, Rita F.; de Lima, João L. M. P.

2018-02-01

Among the urban aquatic pollutants, the most common is sediment which also acts as a transport medium for many contaminants. Hence there is an increasing interest in being able to better predict the sediment wash-off from urban surfaces. The exponential wash-off model is the most widely used method to predict the sediment wash-off. Although a number of studies proposed various modifications to the original exponential wash-off equation, these studies mostly looked into one parameter in isolation thereby ignoring the interactions between the parameters corresponding to rainfall, catchment and sediment characteristics. Hence in this study we aim (a) to investigate the effect of rainfall intensity, surface slope and initial load on wash-off load in an integrated and systematic way and (b) to subsequently improve the exponential wash-off equation focusing on the effect of the aforementioned three parameters. A series of laboratory experiments were carried out in a full-scale setup, comprising of a rainfall simulator, a 1 m2 bituminous road surface, and a continuous wash-off measuring system. Five rainfall intensities ranging from 33 to 155 mm/h, four slopes ranging from 2 to 16% and three initial loads ranging from 50 to 200 g/m2 were selected based on values obtained from the literature. Fine sediment with a size range of 300-600 μm was used for all of the tests. Each test was carried out for one hour with at least 9 wash-off samples per test collected. Mass balance checks were carried out for all the tests as a quality control measure to make sure that there is no significant loss of sand during the tests. Results show that the washed off sediment load at any given time is proportional to initial load for a given combination of rainfall intensity and surface slope. This indicates the importance of dedicated modelling of build-up so as to subsequently predict wash-off load. It was also observed that the maximum fraction that is washed off from the surface increases with both rainfall intensity and the surface slope. This observation leads to the second part of the study where the existing wash-off model is modified by introducing a capacity factor which defines this maximum fraction. This capacity factor is derived as a function of wash-off coefficient, making use of the correlation between the maximum fraction and the wash-off rate. Values of the modified wash-off coefficient are presented for all combinations of rainfall intensities and surface slopes, which can be transferred to other urban catchments with similar conditions.

Influence of the absorption behavior of sunscreens in the short-wavelength UV range (UVB) and the long-wavelength UV range (UVA) on the relation of the UVB absorption to sun protection factor

NASA Astrophysics Data System (ADS)

Weigmann, Hans-Juergen; Schanzer, Sabine; Antoniou, Christina; Sterry, Wolfram; Lademann, Juergen

2010-09-01

The absorption of filter substances in sunscreens, reducing the incident ultraviolet (UV) radiation, is the basis for the protecting ability of such formulations. The erythema-correlated sun protection factor (SPF), depending mainly on the intensity of the UVB radiation, is the common value to quantify the efficacy of the formulations avoiding sunburn. An ex vivo method combining tape stripping and optical spectroscopy is applied to measure the absorption of sunscreens in the entire UV spectral range. The obtained relations between the short-wavelength UV (UVB) absorption and the SPF confirm a clear influence of the long-wavelength UV (UVA) absorption on the SPF values. The data reflect the historical development of the relation of the concentration of UVB and UVA filters in sunscreens and points to the influence of additional ingredients, e.g., antioxidants and cell-protecting agents on the efficacy of the products.

Lifetimes and spatio-temporal response of protein crystals in intense X-ray microbeams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Warkentin, Matthew A.; Atakisi, Hakan; Hopkins, Jesse B.

Serial synchrotron-based crystallography using intense microfocused X-ray beams, fast-framing detectors and protein microcrystals held at 300 K promises to expand the range of accessible structural targets and to increase overall structure-pipeline throughputs. To explore the nature and consequences of X-ray radiation damage under microbeam illumination, the time-, dose- and temperature-dependent evolution of crystal diffraction have been measured with maximum dose rates of 50 MGy s –1. At all temperatures and dose rates, the integrated diffraction intensity for a fixed crystal orientation shows non-exponential decays with dose. Non-exponential decays are a consequence of non-uniform illumination and the resulting spatial evolution ofmore » diffracted intensity within the illuminated crystal volume. To quantify radiation-damage lifetimes and the damage state of diffracting crystal regions, a revised diffraction-weighted dose (DWD) is defined and it is shown that for Gaussian beams the DWD becomes nearly independent of actual dose at large doses. An apparent delayed onset of radiation damage seen in some intensity–dose curves is in fact a consequence of damage. Intensity fluctuations at high dose rates may arise from the impulsive release of gaseous damage products. Accounting for these effects, data collection at the highest dose rates increases crystal radiation lifetimes near 300 K (but not at 100 K) by a factor of ~1.5–2 compared with those observed at conventional dose rates. As a result, improved quantification and modeling of the complex spatio-temporal evolution of protein microcrystal diffraction in intense microbeams will enable more efficient data collection, and will be essential in improving the accuracy of structure factors and structural models.« less

Lifetimes and spatio-temporal response of protein crystals in intense X-ray microbeams

DOE PAGES

Warkentin, Matthew A.; Atakisi, Hakan; Hopkins, Jesse B.; ...

2017-10-13

Serial synchrotron-based crystallography using intense microfocused X-ray beams, fast-framing detectors and protein microcrystals held at 300 K promises to expand the range of accessible structural targets and to increase overall structure-pipeline throughputs. To explore the nature and consequences of X-ray radiation damage under microbeam illumination, the time-, dose- and temperature-dependent evolution of crystal diffraction have been measured with maximum dose rates of 50 MGy s –1. At all temperatures and dose rates, the integrated diffraction intensity for a fixed crystal orientation shows non-exponential decays with dose. Non-exponential decays are a consequence of non-uniform illumination and the resulting spatial evolution ofmore » diffracted intensity within the illuminated crystal volume. To quantify radiation-damage lifetimes and the damage state of diffracting crystal regions, a revised diffraction-weighted dose (DWD) is defined and it is shown that for Gaussian beams the DWD becomes nearly independent of actual dose at large doses. An apparent delayed onset of radiation damage seen in some intensity–dose curves is in fact a consequence of damage. Intensity fluctuations at high dose rates may arise from the impulsive release of gaseous damage products. Accounting for these effects, data collection at the highest dose rates increases crystal radiation lifetimes near 300 K (but not at 100 K) by a factor of ~1.5–2 compared with those observed at conventional dose rates. As a result, improved quantification and modeling of the complex spatio-temporal evolution of protein microcrystal diffraction in intense microbeams will enable more efficient data collection, and will be essential in improving the accuracy of structure factors and structural models.« less

[Prevalence and intensity of infection by soil-transmitted helminths and prevalence of malaria among schoolchildren in El Salvador].

PubMed

Sorto, Óscar René; Portillo, Alexandra Manoella; Aragón, Miguel Ángel; Saboyá, Martha Idalí; Ade, María Paz; Minero, Miguel Ángel; Hernández, Marta Alicia; Mena, Amada Gloria; Peña, Rodolfo; Mejía, Victor Manuel; Carter, Keith

2015-01-01

El Salvador does not have recent data on the prevalence of infection with soil-transmitted helminths among children aged under 15 years of age. As one of the countries in the Americas that reports few malaria cases, eradication of this disease from El Salvador is considered to be feasible. To determine the prevalence and intensity of infection by soil-transmitted helminths, as well as the prevalence of Plasmodium spp. in schoolchildren aged 8-10. A cross-sectional study was carried out in each of the five eco-epidemiological zones of the country (coastal plain, central basin, volcanic range, coastal range and mountain zone). In all 1,325 students we studied the presence of geohelminthiasis, with 152 of them also being tested for malaria. The Kato-Katz technique was used to detect geohelminths while diagnosis of malaria was performed using the rapid diagnostic test, microscopy and polymerase chain reaction. The overall prevalence of geohelminthiasis was 7.9% (95%CI 6.6-9.5%). Values for the five eco-epidemiological zones were as follows: coastal plain, 14.9% (95%CI 10.9-19.7%); central plateau, 9.4% (95%CI 6.5-13.3%); volcanic range, 6.6% (95%CI 4.2-10.5%); coastal range, 5.9% (95%CI 3.8-9.4%), and mountain zone, 2.6% (95%CI 1.4-5.7%). The overall rate of high intensity infection with any of the geohelminth species was 0.3%. No schoolchildren were found infected with Plasmodium spp. by any of the three diagnostic techniques used. Prevalence of geohelminths was low and Trichuris trichiura was the predominant species. Intensity of infection with any of the species of geohelminths was light (<1%). The risk factors associated with infection by soil-transmitted helminths were defecation in the open air, being barefoot and living in coastal areas.

Differential Predictability of Four Dimensions of Affect Intensity

PubMed Central

Rubin, David C.; Hoyle, Rick H.; Leary, Mark R.

2013-01-01

Individual differences in affect intensity are typically assessed with the Affect Intensity Measure (AIM). Previous factor analyses suggest that the AIM is comprised of four weakly correlated factors: Positive Affectivity, Negative Reactivity, Negative Intensity and Positive Intensity or Serenity. However, little data exist to show whether its four factors relate to other measures differently enough to preclude use of the total scale score. The present study replicated the four-factor solution and found that subscales derived from the four factors correlated differently with criterion variables that assess personality domains, affective dispositions, and cognitive patterns that are associated with emotional reactions. The results show that use of the total AIM score can obscure relationships between specific features of affect intensity and other variables and suggest that researchers should examine the individual AIM subscales. PMID:21707262

The application of remote sensing technology to the solution of problems in the management of resources in Indiana

NASA Technical Reports Server (NTRS)

Weismiller, R. A. (Principal Investigator); Mroczynski, R. P.

1977-01-01

The author has identified the following significant results. The Lydich quadrangle area was successfully classified into seven cover types: (1) trees, (2) poorly drained soil and water, (3) pasture land, (4) well drained brown soil, (5) moderately well drained dark brown soil, (6) moderately drained soil, and (7) medium to poorly drained soil. Measurements of the percent of mapping unit represented by a named soil series range from 44 to 55 percent. If the class identified as vegetation is combined with the named unit, the range increases from 54 to 64 percent. The Xenia mapping unit was the only unit represented by less than 50 percent of the named unit. Results from the intensive tent moth study in Owensburg and Williams were interpreted from 70 mm color infrared and visually transferred to maps. A correction factor was necessary, because the date the sample photography was taken was a month later than the intensive site data (CF x acres defoliated in each level = expanded defoliated acres).

Automatic grading of appearance retention of carpets using intensity and range images

NASA Astrophysics Data System (ADS)

Orjuela Vargas, Sergio Alejandro; Ortiz-Jaramillo, Benhur; Vansteenkiste, Ewout; Rooms, Filip; De Meulemeester, Simon; de Keyser, Robain; Van Langenhove, Lieva; Philips, Wilfried

2012-04-01

Textiles are mainly used for decoration and protection. In both cases, their original appearance and its retention are important factors for customers. Therefore, evaluation of appearance parameters are critical for quality assurance purposes, during and after manufacturing, to determine the lifetime and/or beauty of textile products. In particular, appearance retention of textile products is commonly certified with grades, which are currently assigned by human experts. However, manufacturers would prefer a more objective system. We present an objective system for grading appearance retention, particularly, for textile floor coverings. Changes in appearance are quantified by using linear regression models on texture features extracted from intensity and range images. Range images are obtained by our own laser scanner, reconstructing the carpet surface using two methods that have been previously presented. We extract texture features using a variant of the local binary pattern technique based on detecting those patterns whose frequencies are related to the appearance retention grades. We test models for eight types of carpets. Results show that the proposed approach describes the degree of wear with a precision within the range allowed to human inspectors by international standards. The methodology followed in this experiment has been designed to be general for evaluating global deviation of texture in other types of textiles, as well as other surface materials.

Persistent inflammation and recovery after intensive care: A systematic review.

PubMed

Griffith, David M; Vale, Matthew E; Campbell, Christine; Lewis, Steff; Walsh, Timothy S

2016-06-01

Physical weakness is common after critical illness; however, it is not clear how best to treat it. Inflammation characterizes critical illness, is associated with loss of muscle mass during critical illness, and potentially modifies post-intensive care unit (ICU) recovery. We sought to identify published reports on the prevalence of systemic inflammation after critical illness and its association with physical recovery. This is a systematic review of the literature from MEDLINE, EMBASE, CINAHL, CPCI-SSH, and CPCI-S from January 1982 to December 2011. From 7433 references, 207 full-text articles were reviewed, 57 were eligible, and 22 were included. Inflammation was present in most patients at ICU discharge according to C-reactive protein concentration (range, 70%-100%), procalcitonin (range, 89%-100%), tumor necrosis factor α (100%), and systemic inflammatory response syndrome criteria (range, 92%-95%). Fewer patients had elevated myeloperoxidase concentrations (range, 0%-56%). At hospital discharge, 9 (90%) of 10 chronic obstructive pulmonary disease patients had elevated C-reactive protein. No studies tested the association between inflammation and physical recovery. Inflammation is present in most patients at ICU discharge, but little is known or has been investigated about persistent inflammation after this time point. No studies have explored the relationship between persistent inflammation and physical recovery. Further research is proposed. Copyright © 2016 Elsevier Inc. All rights reserved.

Better powder diffractometers. II—Optimal choice of U, V and W

NASA Astrophysics Data System (ADS)

Cussen, L. D.

2007-12-01

This article presents a technique for optimising constant wavelength (CW) neutron powder diffractometers (NPDs) using conventional nonlinear least squares methods. This is believed to be the first such design optimisation for a neutron spectrometer. The validity of this approach and discussion should extend beyond the Gaussian element approximation used and also to instruments using different radiation, such as X-rays. This approach could later be extended to include vertical and perhaps horizontal focusing monochromators and probably other types of instruments such as three axis spectrometers. It is hoped that this approach will help in comparisons of CW and time-of-flight (TOF) instruments. Recent work showed that many different beam element combinations can give identical resolution on CW NPDs and presented a procedure to find these combinations and also find an "optimum" choice of detector collimation. Those results enable the previous redundancy in the description of instrument performance to be removed and permit a least squares optimisation of design. New inputs are needed and are identified as the sample plane spacing ( dS) of interest in the measurement. The optimisation requires a "quality factor", QPD, chosen here to be minimising the worst Bragg peak separation ability over some measurement range ( dS) while maintaining intensity. Any other QPD desired could be substituted. It is argued that high resolution and high intensity powder diffractometers (HRPDs and HIPDs) should have similar designs adjusted by a single scaling factor. Simulated comparisons are described suggesting significant improvements in performance for CW HIPDs. Optimisation with unchanged wavelength suggests improvements by factors of about 2 for HRPDs and 25 for HIPDs. A recently quantified design trade-off between the maximum line intensity possible and the degree of variation of angular resolution over the scattering angle range leads to efficiency gains at short wavelengths. This in turn leads in practice to another trade-off between this efficiency gain and losses at short wavelength due to technical effects. The exact gains from varying wavelength depend on the details of the short wavelength technical losses. Simulations suggest that the total potential PD performance gains may be very significant-factors of about 3 for HRPDs and more than 90 for HIPDs.

Levels and patterns of objectively-measured physical activity volume and intensity distribution in UK adolescents: the ROOTS study

PubMed Central

2014-01-01

Background Few studies have quantified levels of habitual physical activity across the entire intensity range. We aimed to describe variability in total and intensity-specific physical activity levels in UK adolescents across gender, socio-demographic, temporal and body composition strata. Methods Physical activity energy expenditure and minutes per day (min/d) spent sedentary and in light, moderate, and vigorous intensity physical activity were assessed in 825 adolescents from the ROOTS study (43.5% boys; mean age 15.0 ± 0.30 years), by 4 days of individually calibrated combined heart rate and movement sensing. Measurement days were classified as weekday or weekend and according to the three school terms: summer (April-July), autumn (September-December), and spring (January-March). Gender and age were self-reported and area-level SES determined by postcode data. Body composition was measured by anthropometry and bio-electrical impedance. Variability in physical activity and sedentary time was analysed by linear multilevel modelling, and logistic multilevel regression was used to determine factors associated with physical inactivity (<60 min moderate-to-vigorous intensity physical activity/d). Results During awake hours (15.8 ± 0.9 hrs/d), adolescents primarily engaged in light intensity physical activity (517 min/d) and sedentary time (364 min/d). Boys were consistently more physically active and less sedentary than girls, but gender differences were smaller at weekends, as activity levels in boys dropped more markedly when transitioning from weekday to weekend. Boys were more sedentary on both weekend days compared to during the week, whereas girls were more sedentary on Sunday but less sedentary on Saturday. In both genders light intensity physical activity was lower in spring, while moderate physical activity was lower in autumn and spring terms, compared to the summer term; sedentary time was also higher in spring than summer term. Adolescents with higher fatness engaged in less vigorous intensity physical activity. Factors associated with increased odds of physical inactivity were female gender, both weekend days in boys, and specifically Sunday in girls. Conclusions Physical activity components vary by gender, temporal factors and body composition in UK adolescents. The available data indicate that in adolescence, girls should be the primary targets of interventions designed to increase physical activity levels. PMID:24564949

Levels and patterns of objectively-measured physical activity volume and intensity distribution in UK adolescents: the ROOTS study.

PubMed

Collings, Paul J; Wijndaele, Katrien; Corder, Kirsten; Westgate, Kate; Ridgway, Charlotte L; Dunn, Valerie; Goodyer, Ian; Ekelund, Ulf; Brage, Soren

2014-02-24

Few studies have quantified levels of habitual physical activity across the entire intensity range. We aimed to describe variability in total and intensity-specific physical activity levels in UK adolescents across gender, socio-demographic, temporal and body composition strata. Physical activity energy expenditure and minutes per day (min/d) spent sedentary and in light, moderate, and vigorous intensity physical activity were assessed in 825 adolescents from the ROOTS study (43.5% boys; mean age 15.0 ± 0.30 years), by 4 days of individually calibrated combined heart rate and movement sensing. Measurement days were classified as weekday or weekend and according to the three school terms: summer (April-July), autumn (September-December), and spring (January-March). Gender and age were self-reported and area-level SES determined by postcode data. Body composition was measured by anthropometry and bio-electrical impedance. Variability in physical activity and sedentary time was analysed by linear multilevel modelling, and logistic multilevel regression was used to determine factors associated with physical inactivity (<60 min moderate-to-vigorous intensity physical activity/d). During awake hours (15.8 ± 0.9 hrs/d), adolescents primarily engaged in light intensity physical activity (517 min/d) and sedentary time (364 min/d). Boys were consistently more physically active and less sedentary than girls, but gender differences were smaller at weekends, as activity levels in boys dropped more markedly when transitioning from weekday to weekend. Boys were more sedentary on both weekend days compared to during the week, whereas girls were more sedentary on Sunday but less sedentary on Saturday. In both genders light intensity physical activity was lower in spring, while moderate physical activity was lower in autumn and spring terms, compared to the summer term; sedentary time was also higher in spring than summer term. Adolescents with higher fatness engaged in less vigorous intensity physical activity. Factors associated with increased odds of physical inactivity were female gender, both weekend days in boys, and specifically Sunday in girls. Physical activity components vary by gender, temporal factors and body composition in UK adolescents. The available data indicate that in adolescence, girls should be the primary targets of interventions designed to increase physical activity levels.

Impact of mobile intensive care unit use on total ischemic time and clinical outcomes in ST-elevation myocardial infarction patients - real-world data from the Acute Coronary Syndrome Israeli Survey.

PubMed

Koifman, Edward; Beigel, Roy; Iakobishvili, Zaza; Shlomo, Nir; Biton, Yitschak; Sabbag, Avi; Asher, Elad; Atar, Shaul; Gottlieb, Shmuel; Alcalai, Ronny; Zahger, Doron; Segev, Amit; Goldenberg, Ilan; Strugo, Rafael; Matetzky, Shlomi

2017-01-01

Ischemic time has prognostic importance in ST-elevation myocardial infarction patients. Mobile intensive care unit use can reduce components of total ischemic time by appropriate triage of ST-elevation myocardial infarction patients. Data from the Acute Coronary Survey in Israel registry 2000-2010 were analyzed to evaluate factors associated with mobile intensive care unit use and its impact on total ischemic time and patient outcomes. The study comprised 5474 ST-elevation myocardial infarction patients enrolled in the Acute Coronary Survey in Israel registry, of whom 46% ( n=2538) arrived via mobile intensive care units. There was a significant increase in rates of mobile intensive care unit utilization from 36% in 2000 to over 50% in 2010 ( p<0.001). Independent predictors of mobile intensive care unit use were Killip>1 (odds ratio=1.32, p<0.001), the presence of cardiac arrest (odds ratio=1.44, p=0.02), and a systolic blood pressure <100 mm Hg (odds ratio=2.01, p<0.001) at presentation. Patients arriving via mobile intensive care units benefitted from increased rates of primary reperfusion therapy (odds ratio=1.58, p<0.001). Among ST-elevation myocardial infarction patients undergoing primary reperfusion, those arriving by mobile intensive care unit benefitted from shorter median total ischemic time compared with non-mobile intensive care unit patients (175 (interquartile range 120-262) vs 195 (interquartile range 130-333) min, respectively ( p<0.001)). Upon a multivariate analysis, mobile intensive care unit use was the most important predictor in achieving door-to-balloon time <90 min (odds ratio=2.56, p<0.001) and door-to-needle time <30 min (odds ratio=2.96, p<0.001). One-year mortality rates were 10.7% in both groups (log-rank p-value=0.98), however inverse propensity weight model, adjusted for significant differences between both groups, revealed a significant reduction in one-year mortality in favor of the mobile intensive care unit group (odds ratio=0.79, 95% confidence interval (0.66-0.94), p=0.01). Among patients with ST-elevation myocardial infarction, the utilization of mobile intensive care units is associated with increased rates of primary reperfusion, a reduction in the time interval to reperfusion, and a reduction in one-year adjusted mortality.

Multimodal analysis of pretreated biomass species highlights generic markers of lignocellulose recalcitrance.

PubMed

Herbaut, Mickaël; Zoghlami, Aya; Habrant, Anouck; Falourd, Xavier; Foucat, Loïc; Chabbert, Brigitte; Paës, Gabriel

2018-01-01

Biomass recalcitrance to enzymatic hydrolysis has been assigned to several structural and chemical factors. However, their relative importance remains challenging to evaluate. Three representative biomass species (wheat straw, poplar and miscanthus) were submitted to four standard pretreatments (dilute acid, hot water, ionic liquid and sodium chlorite) in order to generate a set of contrasted samples. A large array of techniques, including wet chemistry analysis, porosity measurements using NMR spectroscopy, electron and fluorescence microscopy, were used in order to determine possible generic factors of biomass recalcitrance. The pretreatment conditions selected allowed obtaining samples displaying different susceptibility to enzymatic hydrolysis (from 3 up to 98% of the initial glucose content released after 96 h of saccharification). Generic correlation coefficients were calculated between the measured chemical and structural features and the final saccharification rates. Increases in porosity displayed overall strong positive correlations with saccharification efficiency, but different porosity ranges were concerned depending on the considered biomass. Lignin-related factors displayed highly negative coefficients for all biomasses. Lignin content, which is likely involved in the correlations observed for porosity, was less detrimental to enzymatic hydrolysis than lignin composition. Lignin influence was highlighted by the strong negative correlation with fluorescence intensity which mainly originates from monolignols in mature tissues. Our results provide a better understanding of the factors responsible for biomass recalcitrance that can reasonably be considered as generic. The correlations with specific porosity ranges are biomass species-dependent, meaning that enzymes cocktails with fitted enzyme size are likely to be needed to optimise saccharification depending on the biomass origin. Lignin composition, which probably influences its structure, is the most important parameter to overcome to enhance enzymes access to the polysaccharides. Accordingly, fluorescence intensity was found to be a rapid and simple method to assess recalcitrance after pretreatment.

Adaptation of Rhodopseudomonas acidophila strain 7050 to growth at different light intensities: what are the benefits to changing the type of LH2?

PubMed

Gardiner, A T; Niedzwiedzki, D M; Cogdell, R J

2018-04-01

Typical purple bacterial photosynthetic units consist of light harvesting one/reaction centre 'core' complexes surrounded by light harvesting two complexes. Factors such as the number and size of photosynthetic units per cell, as well as the type of light harvesting two complex that is produced, are controlled by environmental factors. In this paper, the change in the type of LH2 present in the Rhodopsuedomonas acidophila strain 7050 is described when cells are grown at a range of different light intensities. This species contains multiple pucBA genes that encode the apoproteins that form light-harvesting complex two, and a more complex mixture of spectroscopic forms of this complex has been found than was previously thought to be the case. Femto-second time resolved absorption has been used to investigate how the energy transfer properties in the membranes of high-light and low-light adapted cells change as the composition of the LH2 complexes varies.

Techniques for optically compressing light intensity ranges

DOEpatents

Rushford, Michael C.

1989-01-01

A pin hole camera assembly for use in viewing an object having a relatively large light intensity range, for example a crucible containing molten uranium in an atomic vapor laser isotope separator (AVLIS) system is disclosed herein. The assembly includes means for optically compressing the light intensity range appearing at its input sufficient to make it receivable and decipherable by a standard video camera. A number of different means for compressing the intensity range are disclosed. These include the use of photogray glass, the use of a pair of interference filters, and the utilization of a new liquid crystal notch filter in combination with an interference filter.

Techniques for optically compressing light intensity ranges

DOEpatents

Rushford, M.C.

1989-03-28

A pin hole camera assembly for use in viewing an object having a relatively large light intensity range, for example a crucible containing molten uranium in an atomic vapor laser isotope separator (AVLIS) system is disclosed herein. The assembly includes means for optically compressing the light intensity range appearing at its input sufficient to make it receivable and decipherable by a standard video camera. A number of different means for compressing the intensity range are disclosed. These include the use of photogray glass, the use of a pair of interference filters, and the utilization of a new liquid crystal notch filter in combination with an interference filter. 18 figs.

Study of steel crack resistance under dynamic loading and temperature range 20-300 °C

NASA Astrophysics Data System (ADS)

Novikov, S. A.; Pushkov, V. A.

1996-05-01

The paper describes an experimental technique to measure crack resistance (plane stress-intensity factor) K1C of structural materials at loading rates up to 2ṡ106MPaṡm1/2ṡs-1 and temperatures 20-300 °C. This technique is based on the known Kolsky method using split Hopkinson bars. The tests were performed using compact WOL-specimens of steel St.3.

Development of a fine scale smoke dispersion modeling system. Part II: Case study of a prescribed burn in the New Jersey Pine Barrens

Treesearch

Michael T. Kiefer; Warren E. Heilman; Shiyuan Zhong; Joseph J. Charney; X. Bian; Ryan P. Shadbolt; John Hom; Kenneth Clark; Nicholas Skowronski; Michael Gallagher; Matthew Patterson

2011-01-01

Smoke dispersion from wildland fires is a critical health and safety issue, impacting air quality and visibility across a broad range of space and time scales. Predicting the dispersion of smoke from low-intensity fires is particularly challenging due to the fact that it is highly sensitive to factors such as near-surface meteorological conditions, local topography,...

Intestinal helminthiasis in children with chronic neurological disorders in Benin City, Nigeria: intensity and behavioral risk factors.

PubMed

Nwaneri, Damia Uchechukwu; Ibadin, Michael Okoeguale; Ofovwe, Gabriel Egberue; Sadoh, Ayebo Evawere

2013-05-01

Behavioral aberrations such as nail biting, finger sucking, and pica have been postulated as risk factors that enhance helminths ova transmission. These aberrations may present commonly in children with chronic neurological disorders and predispose them to heavy intensity of intestinal helminthiasis. This comparative cross-sectional study was to determine the prevalence, intensity, and behavioral risk factors for intestinal helminthiasis in children with chronic neurological disorders and apparently healthy controls. Fresh stool samples from 155 children (2-17 years) with chronic neurological disorders seen at the child neurology clinic and 155 age and sex matched controls from nursery and primary schools in Benin City were analyzed using the Kato-Katz technique for detection of ova of helminths from November 2008 to April 2009. The prevalence of intestinal helminthiasis (31.0%) was significantly higher in children with chronic neurological disorders compared with the controls (19.4%) (P=0.03). The intensity of infections in both groups was light ranging 24-144 eggs per gram. Ascaris lumbricoides, Trichuris trichiura and hookworm were the intestinal helminths isolated in both groups. Behavioral aberrations were significantly more represented in the subjects than in the controls (P<0.0001, OR=2.8). Nail biting and encopresis were the most significant independent predictors of intestinal helminthiasis (P=0.025 and 0.001, respectively) in the subjects only. Hand washing with water and soap after defecation and frequent de-worming exercise were practices significantly associated with decreased prevalence of intestinal helminthiasis in the subjects and controls. Behavioral modification in children with chronic neurological disorders should be an integral part of the control program for intestinal helminthiasis.

Absolute geomagnetic intensity data from preclassic Guatemalan pottery

NASA Astrophysics Data System (ADS)

Alva-Valdivia, L. M.; Morales, J.; Goguitchaichvili, A.; Popenoe de Hatch, M.; Hernandez-Bernal, M. S.; Mariano-Matías, F.

2010-05-01

Archaeointensity results from 10 pottery fragments from the Kaminaljuyu area (14°37'N, 90°32'W)—Guatemala, whose ages range from 100 to 900 B.C., were determined in order to contribute to the incipient intensity secular variation curve for the preclassic period in Mesoamerica. Magnetic experiments including hysteresis loops, IRM-DIRM and Curie temperature analysis indicate that pseudo-single-domain magnetite and/or titanium poor titanomagnetites are responsible for the remanence. Pottery fragments were analyzed using the Coe version of the Thellier and Thellier paleointensity method. Although not numerous, our results meet with high standard, commonly accepted strict selection and acceptance criteria as attested by reasonably high Coe quality factors. The fragment mean archaeointensities range from 15 to 43 μT, and corresponding virtual axial dipole moments range from 3.6 ± 0.7 to 10.3 ± 0.9 × 10 22 Am 2. This corresponds to a mean VADM value of (7.5 ± 2.5) × 10 22 Am 2, which is close to the present day field strength. The new results obtained in this study together with those of ArcheoInt data compilation, are analyzed in context of CALS3k and ARCH3K model predictions.

Spin glass freezing and superconductivity in YBa2(Cu(1-x)Fe(x))3O7 alloys

NASA Technical Reports Server (NTRS)

Mirebeau, I.; Hennion, M.; Dianoux, J.; Caignaert, V.; Phillips, T. E.; Moorjani, K.

1991-01-01

The dynamics were studied of the iron spins in superconducting YBa2(Cu(0.94)Fe(0.06))3O7 by neutron time of flight measurements. Two samples were studied with slightly different characteristics, as shown by resistivity and neutron diffraction measurements. The same dynamical anomalies are observed by neutrons in both samples. Differences appear qualitative but not quantitative. In the whole temperature range, the q-dependence of the magnetic intensity mainly reflects the magnetic form factor of iron which shows that the iron spins are almost uncorrelated. The elastic and quasielastic intensities strongly vary with temperature. A spin glass like freezing is revealed at low temperature by a sharp decrease of the quasielastic intensity, an increase of the 'elastic' or resolution limited intensity and a minimum in the quasielastic width. The freezing temperature (T sub f - 18 K) corresponds to that already determined by a magnetic splitting in Mossbauer experiments. Above T sub f, the relaxation of the iron spins in the paramagnetic state is modified by the occurrence of superconductivity. An increase was observed of the quasielastic intensity and of the quasielastic width at the superconducting transition.

Modelling CO emission - II. The physical characteristics that determine the X factor in Galactic molecular clouds

NASA Astrophysics Data System (ADS)

Shetty, Rahul; Glover, Simon C.; Dullemond, Cornelis P.; Ostriker, Eve C.; Harris, Andrew I.; Klessen, Ralf S.

2011-08-01

We investigate how the X factor, the ratio of the molecular hydrogen column density (?) to velocity-integrated CO intensity (W), is determined by the physical properties of gas in model molecular clouds (MCs). The synthetic MCs are results of magnetohydrodynamic simulations, including a treatment of chemistry. We perform radiative transfer calculations to determine the emergent CO intensity, using the large velocity gradient approximation for estimating the CO population levels. In order to understand why observations generally find cloud-averaged values of X = XGal˜ 2 × 1020 cm-2 K-1 km-1 s, we focus on a model representing a typical Milky Way MC. Using globally integrated ? and W reproduces the limited range in X found in observations and a mean value X = XGal= 2.2 × 1020 cm-2 K-1 km-1 s. However, we show that when considering limited velocity intervals, X can take on a much larger range of values due to CO line saturation. Thus, the X factor strongly depends on both the range in gas velocities and the volume densities. The temperature variations within individual MCs do not strongly affect X, as dense gas contributes most to setting the X factor. For fixed velocity and density structure, gas with higher temperatures T has higher W, yielding X ∝ T-1/2 for T ˜ 20-100 K. We demonstrate that the linewidth-size scaling relationship does not influence the X factor - only the range in velocities is important. Clouds with larger linewidths σ, regardless of the linewidth-size relationship, have a higher W, corresponding to a lower value of X, scaling roughly as X ∝σ-1/2. The 'mist' model, often invoked to explain a constant XGal consisting of optically thick cloudlets with well-separated velocities, does not accurately reflect the conditions in a turbulent MC. We propose that the observed cloud-averaged values of X ˜ XGal are simply a result of the limited range in ?, temperatures and velocities found in Galactic MCs - a nearly constant value of X therefore does not require any linewidth-size relationship, or that MCs are virialized objects. Since gas properties likely differ (albeit even slightly) from cloud to cloud, masses derived through a standard value of the X factor should only be considered as a rough first estimate. For temperatures T ˜ 10-20 K, velocity dispersions σ˜ 1-6 km s-1and ? cm-2, we find cloud-averaged values X ˜ 2-4 × 1020 cm-2 K-1 km-1 s for solar-metallicity models.

Three dimensional finite-element analysis of finite-thickness fracture specimens

NASA Technical Reports Server (NTRS)

Raju, I. S.; Newman, J. C., Jr.

1977-01-01

The stress-intensity factors for most of the commonly used fracture specimens (center-crack tension, single and double edge-crack tension, and compact), those that have a through-the-thickness crack, were calculated using a three dimensional finite-element elastic stress analysis. Three-dimensional singularity elements were used around the crack front. The stress intensity factors along the crack front were evaluated by using a force method, developed herein, that requires no prior assumption of either plane stress or plane strain. The calculated stress-intensity factors from the present analysis were compared with those from the literature whenever possible and were generally found to be in good agreement. The stress-intensity factors at the midplane for all specimens analyzed were within 3 percent of the two dimensional plane strain values. The stress intensity factors at the specimen surfaces were considerably lower than at the midplanes. For the center-crack tension specimens with large thickness to crack-length ratios, the stress-intensity factor reached a maximum near the surface of the specimen. In all other specimens considered the maximum stress intensity occurred at the midplane.

The developing juvenile ischium: macro-radiographic insights.

PubMed

Maclean, Stephen J; Black, Sue M; Cunningham, Craig A

2014-09-01

Despite the importance of the human pelvis as a weight-bearing structure, there is a paucity of literature that discusses the development of the juvenile innominate from a biomechanical perspective. This study aims to add to the limited body of literature pertaining to this topic through the qualitative analysis of the gross architecture of the human ischium during the juvenile period. Macro-radiographs of 55 human ischia ranging from 28 intra-uterine weeks to 14 years of age were examined using intensity-gradient color mapping to highlight changes in gross structural morphology with increasing age. A clear pattern of maturation was observed in the juvenile ischium with increasing age. The acetabular component and ramus of the ischium consistently displayed low bone intensity in the postnatal skeletal material. Conversely the posterior body of the ischium, and in particular the ischial spine and lesser sciatic notch, exhibited increasing bone intensity which first arose at 1-2 years of age and became more expansive in older cohorts. The intensity patterns observed within the developing juvenile ischium are indicative of the potential factors influencing the maturation of this skeletal element. While the low intensity acetabular fossa indicates a lack of significant biomechanical interactions, the posterior increase in bone intensity may be related to the load-bearing nature of the posterior ischium. © 2014 Wiley Periodicals, Inc.

Effect of exercise intensity on albuminuria in adolescents with Type 1 diabetes mellitus.

PubMed

Kornhauser, C; Malacara, J-M; Macías-Cervantes, M-H; Rivera-Cisneros, A-E

2012-01-01

Exercise may be useful to detect patients with diabetes prone to develop persistent microalbuminuria. We studied the relationship between exercise intensity, measured as maximal oxygen consumption (VO(2)max), and microalbuminuria in patients with Type 1 diabetes mellitus patients. We studied 10 patients, age range 10-18 years, with Type 1 diabetes who were normotensive and normoalbuminuric, with less than 10 years since diagnosis. Patients had normal renal function, without infections or clinical evidence of complications. Metabolic control was intensively adjusted in all patients. They underwent three consecutive physical exercise tests, reaching 100, 80 and 60% of the maximal cardiac frequency response. Eight patients had adequate to regular metabolic control. All patients had lower than predicted VO(2)max values. At 60%, only three patients showed microalbuminuria in excess of 20 μg/min, two of them had inadequate metabolic control. Post-exercise microalbuminuria exceeded normal values in nine, seven and three patients when submitted to 100, 80 and 60% of exercise intensity, respectively. Microalbuminuria increased with exercise intensity. Sex, body composition and VO(2)max were the main factors associated with microalbuminuria. The prognostic significance of albuminuria induced by intense exercise in these subjects with Type 1 diabetes is not yet known. © 2011 The Authors. Diabetic Medicine © 2011 Diabetes UK.

Note: A new design for a low-temperature high-intensity helium beam source

NASA Astrophysics Data System (ADS)

Lechner, B. A. J.; Hedgeland, H.; Allison, W.; Ellis, J.; Jardine, A. P.

2013-02-01

A high-intensity supersonic beam source is a key component of any atom scattering instrument, affecting the sensitivity and energy resolution of the experiment. We present a new design for a source which can operate at temperatures as low as 11.8 K, corresponding to a beam energy of 2.5 meV. The new source improves the resolution of the Cambridge helium spin-echo spectrometer by a factor of 5.5, thus extending the accessible timescales into the nanosecond range. We describe the design of the new source and discuss experiments characterizing its performance. Spin-echo measurements of benzene/Cu(100) illustrate its merit in the study of a typical slow-moving molecular adsorbate species.

Systematic error of diode thermometer.

PubMed

Iskrenovic, Predrag S

2009-08-01

Semiconductor diodes are often used for measuring temperatures. The forward voltage across a diode decreases, approximately linearly, with the increase in temperature. The applied method is mainly the simplest one. A constant direct current flows through the diode, and voltage is measured at diode terminals. The direct current that flows through the diode, putting it into operating mode, heats up the diode. The increase in temperature of the diode-sensor, i.e., the systematic error due to self-heating, depends on the intensity of current predominantly and also on other factors. The results of systematic error measurements due to heating up by the forward-bias current have been presented in this paper. The measurements were made at several diodes over a wide range of bias current intensity.

Superimposition of speaking voice characteristics and phonetograms in untrained and trained vocal groups.

PubMed

Awan, S N

1993-03-01

This study details a comparison of the speaking F0 and intensity values of young male and female adults with and without vocal training, as well as the superimposition of the speaking F0 and intensity data upon phonetograms. Results indicated that (a) trained vocalists have similar mean speaking F0's than do untrained vocalists, but exhibit significantly greater speaking F0 ranges than do untrained vocalists; (b) trained vocalists are significantly greater mean intensity levels in speech, as well as significantly greater speaking intensity ranges than do untrained vocalists; (c) the mean speaking F0 for both trained and untrained vocalists was found in the vicinity of the 5-7% frequency level of the entire phonational F0 range (in Hz), equivalent to 12-16% of the phonational F0 range in semitones; (d) the overall speech area (mean speaking F0 and minimum and maximum speaking F0 peaks) was found in the lower 23-31% of the entire phonational F0 range (in semitones), with the untrained subjects utilizing the lower 25% of the phonational range (in semitones) and the trained subjects extending this area to the lower 28-31%; and (e) significant correlations were observed between the total intensity range and intensity range used in speech in trained female vocalists and between total F0 range and speaking F0 range in the combined trained male and female group. These results have important implications for the use of the phonetogram, as well as the clinical applicability of vocal training exercises in various speech and voice therapy cases.

Examination of the site amplification factor of OBS and their application to magnitude estimation and ground-motion prediction for EEW

NASA Astrophysics Data System (ADS)

Hayashimoto, N.; Hoshiba, M.

2013-12-01

1. Introduction Ocean bottom seismograph (OBS) is useful for making Earthquake Early Warning (EEW) earlier. However, careful handling of these data is required because the installation environment of OBSs may be different from that of land stations. Site amplification factor is an important factor to estimate the magnitudes, and to predict ground motions (e.g. seismic intensity) in EEW. In this presentation, we discuss the site amplification factor of OBS in the Tonankai area of Japan from these two points of view. 2. Examination of magnitude correction of OBS In the EEW of JMA, the magnitude is estimated from the maximum amplitude of the displacement in real time. To provide the fast magnitude estimation, the magnitude-estimation algorithm switches from the P to S formula (Meew(P) to Meew(S)) depending on the expected S-phase arrival (Kamigaichi,2004). To estimate the magnitude correction for OBS, we determine Meew(P) and Meew(S) at OBSs and compare them with JMA magnitude (Mjma). We find Meew(S) at OBS is generally larger than Mjma by approximately 0.6. The slight differences of spatial distribution of Meew(S) amplification are also found among other OBSs. From the numerical simulations, Nakamura et al. (MGR,submitted) pointed out that the oceanic layer and the low-velocity sediment layers causes the large amplifications in low frequency range (0.1-0.2Hz) at OBSs. We conclude that the site effect of OBS characterized by such a low velocity sediment layers causes those amplification of Magnitude. 3. The frequency-dependent site factor of OBS estimated from Fourier spectrum ratio and their application for prediction of seismic intensity of land station We compare Fourier spectra of S-wave portion on OBSs with those on adjacent land stations. Station pair whose distance is smaller than 50 km is analyzed, and we obtain that spectral ratio of land station (MIEH05 of the KiK-net/NIED) to OBS (KMA01 of the DONET/JAMSTEC) is 5-20 for frequencies 10-20Hz for both horizontal and vertical components, whereas it is approximately 0.2 at less than 2Hz for the horizontal component, which corresponds to the relative site amplification factors in the frequency domain. In addition, we compare the accuracies of expected seismic intensity of land stations using the average of seismic intensity difference with those using the spectral ratio as the empirical amplification factor. In an example of station pair mentioned above, the RMS of the difference between measured and predicted seismic intensity is improved by about 38% by using a spectral ratio as the amplification factor. These results indicate that the frequency-dependent site factor is crucial factor to predict seismic intensity from OBS data, and also show that OBS can be used as front stations in the method for prediction of ground motion based on the real-time monitoring (Hoshiba, 2013). Acknowledgement: Waveform data were obtained from the JMA network, DONET of the JAMSTEC, K-net and KiK-net of the NIED.

Control of Earth-like magnetic fields on the transformation of ferrihydrite to hematite and goethite

PubMed Central

Jiang, Zhaoxia; Liu, Qingsong; Dekkers, Mark J.; Barrón, Vidal; Torrent, José; Roberts, Andrew P.

2016-01-01

Hematite and goethite are the two most abundant iron oxides in natural environments. Their formation is controlled by multiple environmental factors; therefore, their relative concentration has been used widely to indicate climatic variations. In this study, we aimed to test whether hematite and goethite growth is influenced by ambient magnetic fields of Earth-like values. Ferrihydrite was aged at 95 °C in magnetic fields ranging from ~0 to ~100 μT. Our results indicate a large influence of the applied magnetic field on hematite and goethite growth from ferrihydrite. The synthesized products are a mixture of hematite and goethite for field intensities <~60 μT. Higher fields favour hematite formation by accelerating ferrimagnetic ferrihydrite aggregation. Additionally, hematite particles growing in a controlled magnetic field of ~100 μT appear to be arranged in chains, which may be reduced to magnetite keeping its original configuration, therefore, the presence of magnetic particles in chains in natural sediments cannot be used as an exclusive indicator of biogenic magnetite. Hematite vs. goethite formation in our experiments is influenced by field intensity values within the range of geomagnetic field variability. Thus, geomagnetic field intensity could be a source of variation when using iron (oxyhydr-)oxide concentrations in environmental magnetism. PMID:27458091

Control of Earth-like magnetic fields on the transformation of ferrihydrite to hematite and goethite.

PubMed

Jiang, Zhaoxia; Liu, Qingsong; Dekkers, Mark J; Barrón, Vidal; Torrent, José; Roberts, Andrew P

2016-07-26

Hematite and goethite are the two most abundant iron oxides in natural environments. Their formation is controlled by multiple environmental factors; therefore, their relative concentration has been used widely to indicate climatic variations. In this study, we aimed to test whether hematite and goethite growth is influenced by ambient magnetic fields of Earth-like values. Ferrihydrite was aged at 95 °C in magnetic fields ranging from ~0 to ~100 μT. Our results indicate a large influence of the applied magnetic field on hematite and goethite growth from ferrihydrite. The synthesized products are a mixture of hematite and goethite for field intensities <~60 μT. Higher fields favour hematite formation by accelerating ferrimagnetic ferrihydrite aggregation. Additionally, hematite particles growing in a controlled magnetic field of ~100 μT appear to be arranged in chains, which may be reduced to magnetite keeping its original configuration, therefore, the presence of magnetic particles in chains in natural sediments cannot be used as an exclusive indicator of biogenic magnetite. Hematite vs. goethite formation in our experiments is influenced by field intensity values within the range of geomagnetic field variability. Thus, geomagnetic field intensity could be a source of variation when using iron (oxyhydr-)oxide concentrations in environmental magnetism.

Fluorescein permeability and electrical resistance of human skin during low frequency ultrasound application.

PubMed

Cancel, Limary M; Tarbell, John M; Ben-Jebria, Abdellaziz

2004-09-01

Transdermal drug delivery offers an alternative to injections and oral medication but is limited by the low skin permeability of most drugs. The use of low-frequency ultrasound over long periods of time, typically over an hour, has been shown to enhance skin permeability, a phenomenon referred to as sonophoresis. In this study, we investigated the effects of short time sonication of human skin at 20 kHz and at variable intensities and duty cycles on the dynamics of fluorescein transport across the skin (permeability) as well as the changes in the skin's structural integrity (electrical resistance). We found that a short application of ultrasound enhanced the transport of fluorescein across human skin by a factor in the range of 2-9 for full thickness skin samples and by a factor in the range of 2-28 000 for heat-stripped stratum corneum samples (however, samples with very high (10(3)) enhancement were likely to have been damaged by ultrasound). The electrical resistance of the skin decreased by an average of 20% for full thickness samples and 58% for stratum corneum samples. Increasing the duty cycle from 10 to 60% caused a significant increase in permeability enhancement from 2.3 to 9.1, and an increase in intensity from 8 to 23 mW cm(-2) induced a significant increase in permeability enhancement from 2 to 7.4, indicating a clear dependence of the permeability on both duty cycle and intensity. The increase in solute flux upon ultrasound exposure was immediate, demonstrating for the first time the fast response dynamics of sonophoretic enhancement. In addition, a quantitative analysis of the thermal and convective dispersion effects associated with ultrasound application showed that each contributes significantly to the overall permeability enhancement observed.

A new Leukemia Prognostic Scoring System for refractory/relapsed adult acute myelogeneous leukaemia patients: a GOELAMS study.

PubMed

Chevallier, P; Labopin, M; Turlure, P; Prebet, T; Pigneux, A; Hunault, M; Filanovsky, K; Cornillet-Lefebvre, P; Luquet, I; Lode, L; Richebourg, S; Blanchet, O; Gachard, N; Vey, N; Ifrah, N; Milpied, N; Harousseau, J-L; Bene, M-C; Mohty, M; Delaunay, J

2011-06-01

A simplified prognostic score is presented based on the multivariate analysis of 138 refractory/relapsed acute myeloid leukaemia (AML) patients (median age 55 years, range: 19-70) receiving a combination of intensive chemotherapy+Gemtuzumab as salvage regimen. Overall, 2-year event-free survival (EFS) and overall survival (OS) were 29±4% and 36±4%, respectively. Disease status (relapse <12 months, including refractory patients), FLT3-ITD-positive status and high-risk cytogenetics were the three strongest independent adverse prognostic factors for OS and EFS in this series. We then defined three subgroups with striking different outcomes at 2 years: no adverse factor (favourable, N=36): OS 58%, EFS 45%; one adverse factor (intermediate, N=54): OS 37%, EFS 31%; two or three adverse factors (poor, N=43): OS 12%, EFS 12% (P<10(-4), P=0.001). This new simplified Leukemia Prognostic Scoring System was then validated on an independent cohort of 111 refractory/relapsed AML patients. This new simplified prognostic score, using three clinical and biological parameters routinely applied, allow to discriminate around two third of the patients who should benefit from a salvage intensive regimen in the setting of refractory/relapsed AML patients. The other one third of the patients should receive investigational therapy.

Method of improving a digital image

NASA Technical Reports Server (NTRS)

Jobson, Daniel J. (Inventor); Woodell, Glenn A. (Inventor); Rahman, Zia-ur (Inventor)

1999-01-01

A method of improving a digital image is provided. The image is initially represented by digital data indexed to represent positions on a display. The digital data is indicative of an intensity value I.sub.i (x,y) for each position (x,y) in each i-th spectral band. The intensity value for each position in each i-th spectral band is adjusted to generate an adjusted intensity value for each position in each i-th spectral band in accordance with ##EQU1## where S is the number of unique spectral bands included in said digital data, W.sub.n is a weighting factor and * denotes the convolution operator. Each surround function F.sub.n (x,y) is uniquely scaled to improve an aspect of the digital image, e.g., dynamic range compression, color constancy, and lightness rendition. The adjusted intensity value for each position in each i-th spectral band is filtered with a common function and then presented to a display device. For color images, a novel color restoration step is added to give the image true-to-life color that closely matches human observation.

Stress Intensity Factors for Part-Through Surface Cracks in Hollow Cylinders

NASA Technical Reports Server (NTRS)

Mettu, Sambi R.; Raju, Ivatury S.; Forman, Royce G.

1992-01-01

Flaws resulting from improper welding and forging are usually modeled as cracks in flat plates, hollow cylinders or spheres. The stress intensity factor solutions for these crack cases are of great practical interest. This report describes some recent efforts at improving the stress intensity factor solutions for cracks in such geometries with emphasis on hollow cylinders. Specifically, two crack configurations for cylinders are documented. One is that of a surface crack in an axial plane and the other is a part-through thumb-nail crack in a circumferential plane. The case of a part-through surface crack in flat plates is used as a limiting case for very thin cylinders. A combination of the two cases for cylinders is used to derive a relation for the case of a surface crack in a sphere. Solutions were sought which cover the entire range of the geometrical parameters such as cylinder thickness, crack aspect ratio and crack depth. Both the internal and external position of the cracks are considered for cylinders and spheres. The finite element method was employed to obtain the basic solutions. Power-law form of loading was applied in the case of flat plates and axial cracks in cylinders and uniform tension and bending loads were applied in the case of circumferential (thumb-nail) cracks in cylinders. In the case of axial cracks, the results for tensile and bending loads were used as reference solutions in a weight function scheme so that the stress intensity factors could be computed for arbitrary stress gradients in the thickness direction. For circumferential cracks, since the crack front is not straight, the above technique could not be used. Hence for this case, only the tension and bending solutions are available at this time. The stress intensity factors from the finite element method were tabulated so that results for various geometric parameters such as crack depth-to-thickness ratio (a/t), crack aspect ratio (a/c) and internal radius-to-thickness ratio (R/t) or the crack length-to-width ratio (2c/W) could be obtained by interpolation and extrapolation. Such complete tables were then incorporated into the NASA/FLAGRO computer program which is widely used by the aerospace community for fracture mechanics analysis.

A contribution to laser range imaging technology

NASA Technical Reports Server (NTRS)

Defigueiredo, Rui J. P.; Denney, Bradley S.

1991-01-01

The goal of the project was to develop a methodology for fusion of a Laser Range Imaging Device (LRID) and camera data. Our initial work in the project led to the conclusion that none of the LRID's that were available were sufficiently adequate for this purpose. Thus we spent the time and effort on the development of the new LRID with several novel features which elicit the desired fusion objectives. In what follows, we describe the device developed and built under contract. The Laser Range Imaging Device (LRID) is an instrument which scans a scene using a laser and returns range and reflection intensity data. Such a system would be extremely useful in scene analysis in industry and space applications. The LRID will be eventually implemented on board a mobile robot. The current system has several advantages over some commercially available systems. One improvement is the use of X-Y galvonometer scanning mirrors instead of polygonal mirrors present in some systems. The advantage of the X-Y scanning mirrors is that the mirror system can be programmed to provide adjustable scanning regions. For each mirror there are two controls accessible by the computer. The first is the mirror position and the second is a zoom factor which modifies the amplitude of the position of the parameter. Another advantage of the LRID is the use of a visible low power laser. Some of the commercial systems use a higher intensity invisible laser which causes safety concerns. By using a low power visible laser, not only can one see the beam and avoid direct eye contact, but also the lower intensity reduces the risk of damage to the eye, and no protective eyeware is required.

Clinical profile and outcome of myasthenic crisis in a tertiary care hospital: A prospective study.

PubMed

Sharma, Sudhir; Lal, Vivek; Prabhakar, Sudesh; Agarwal, Ritesh

2013-04-01

The present understanding of the clinical course, complications, and outcome of myasthenic crisis (MC) is based chiefly on observational studies and retrospective case series. To study the baseline demographic and clinical variables, risk factors, complications, outcome, and mortality in patients of MC. All patients of myasthenia gravis (MG) who presented with myasthenic crisis between July 2009 and December 2010 were included. Ten patients of MC were included in this study. The median age of the patients was 40.5 years (range 14-71 years). Seven were females and three were males. Nine had generalized MG and one patient had oculobulbar involvement only. Median duration of disease was 3 years (range 1 month to17 years). Two patients had thymoma. Two patients had history of thymectomy in the past. Infection was the most common triggering factor accounting for five cases (50%) followed by inadequate treatment/drug withdrawal in three (30%) and steroid initiation and hypokalemia in the remaining two patients (20%). Median duration of MC was 12 days (range 3-28 days). Mortality was in 3 out of 10 (30%) during MC. Management in the intensive care unit (ICU) and treatment with plasma exchange/intravenous immunoglobulins were associated with good outcome. Ventilator support and management in intensive care unit are the most important components in the management of MC. The high mortality rate seen in present study may be more reflective of the actual ground reality in resource constrained developing countries, however, larger prospective studies are needed to confirm these findings.

Clinical psychologists' views of intensive interaction as an intervention in learning disability services.

PubMed

Berry, Ruth; Firth, Graham; Leeming, Catherine; Sharma, Vishal

2014-01-01

Intensive Interaction was initially developed in the 1980s as an educational approach for developing social communication and engagement with people with severe or profound intellectual disabilities and/or autism. Intensive Interaction has subsequently been adopted by a range of practitioners and professionals working in learning disability services and has a broad multi-disciplinary acceptance, being recommended in a number of UK governmental guidance documents. Despite this, there has been limited work on developing a deeper psychological understanding of the approach. This study utilises a qualitative description/thematic analysis approach to explore how clinical psychologists conceptualise the approach with regard to currently accepted psychological theories, as well as looking at other factors that influence their adoption and advocacy. The sample deliberately consisted of eight NHS (National Health Service) clinical psychologists known to be using or advocating the use of Intensive Interaction with people with a learning disability. The results of this study indicate that although the participants referred to some theories that might explain the beneficial outcomes of Intensive Interaction, these theories were rarely explicitly or clearly referenced, resulting in the authors having to attribute specific theoretical positions on the basis of inductive analysis of the participants' responses. Moreover, the participants provided varying views on how Intensive Interaction might be conceptualised, highlighting the lack of a generally accepted, psychologically framed definition of the approach. In conclusion, it was felt that further research is required to develop a specifically psychological understanding of Intensive Interaction alongside the formation of a Special Interest Group, which might have this task as one of its aims. There appeared to be a limited recognition amongst the participants of the specific psychological theories that can be seen to explain the beneficial outcomes of Intensive Interaction. The participants were found to differ in how they explained the approach and typically used everyday 'non-psychological' language or individual concepts/terms rather than clearly or extensively referencing particular theoretical models. The participants appeared to differ in the range of clients who they thought might benefit from Intensive Interaction. An Intensive Interaction Special Interest Group, which includes clinical psychologists, should be set up to instigate psychologically informed theory development and research with the broader aims of fostering greater understanding and adoption of Intensive Interaction within services for people with severe or profound intellectual disabilities and/or autism. Copyright © 2013 John Wiley & Sons, Ltd.

Why aren't there more Atlantic salmon (Salmo salar)?

USGS Publications Warehouse

Parrish, D.L.; Behnke, R.J.; Gephard, S.R.; McCormick, S.D.; Reeves, G.H.

1998-01-01

Numbers of wild anadromous Atlantic salmon (Salmo salar) have declined demonstrably throughout their native range. The current status of runs on rivers historically supporting salmon indicate widespread declines and extirpations in Europe and North America primarily in southern portions of the range. Many of these declines or extirpations can be attributed to the construction of mainstem dams, pollution (including acid rain), and total dewatering of streams. Purported effects on declines during the 1960s through the 1990s include overfishing, and more recently, changing ocean conditions, and intensive aquaculture. Most factors affecting salmon numbers do not act singly, but rather in concert, which masks the relative contribution of each factor. Salmon researchers and managers should not look for a single culprit in declining numbers of salmon, but rather, seek solutions through rigorous data gathering and testing of multiple effects integrated across space and time.

Demons deformable registration of CT and cone-beam CT using an iterative intensity matching approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nithiananthan, Sajendra; Schafer, Sebastian; Uneri, Ali

2011-04-15

Purpose: A method of intensity-based deformable registration of CT and cone-beam CT (CBCT) images is described, in which intensity correction occurs simultaneously within the iterative registration process. The method preserves the speed and simplicity of the popular Demons algorithm while providing robustness and accuracy in the presence of large mismatch between CT and CBCT voxel values (''intensity''). Methods: A variant of the Demons algorithm was developed in which an estimate of the relationship between CT and CBCT intensity values for specific materials in the image is computed at each iteration based on the set of currently overlapping voxels. This tissue-specificmore » intensity correction is then used to estimate the registration output for that iteration and the process is repeated. The robustness of the method was tested in CBCT images of a cadaveric head exhibiting a broad range of simulated intensity variations associated with x-ray scatter, object truncation, and/or errors in the reconstruction algorithm. The accuracy of CT-CBCT registration was also measured in six real cases, exhibiting deformations ranging from simple to complex during surgery or radiotherapy guided by a CBCT-capable C-arm or linear accelerator, respectively. Results: The iterative intensity matching approach was robust against all levels of intensity variation examined, including spatially varying errors in voxel value of a factor of 2 or more, as can be encountered in cases of high x-ray scatter. Registration accuracy without intensity matching degraded severely with increasing magnitude of intensity error and introduced image distortion. A single histogram match performed prior to registration alleviated some of these effects but was also prone to image distortion and was quantifiably less robust and accurate than the iterative approach. Within the six case registration accuracy study, iterative intensity matching Demons reduced mean TRE to (2.5{+-}2.8) mm compared to (3.5{+-}3.0) mm with rigid registration. Conclusions: A method was developed to iteratively correct CT-CBCT intensity disparity during Demons registration, enabling fast, intensity-based registration in CBCT-guided procedures such as surgery and radiotherapy, in which CBCT voxel values may be inaccurate. Accurate CT-CBCT registration in turn facilitates registration of multimodality preoperative image and planning data to intraoperative CBCT by way of the preoperative CT, thereby linking the intraoperative frame of reference to a wealth of preoperative information that could improve interventional guidance.« less

Waiting time of inpatients before elective surgical procedures at a State Government Teaching Hospital in India.

PubMed

Ray, Shreyasi; Kirtania, Jyotirmay

2017-01-01

Abundant published literature exists addressing the issues of outpatient waiting lists before surgery. However, there is no published literature on inpatient waiting time before elective surgical procedures. This study aims to measure the inpatient waiting time, identify the factors that affect the inpatient waiting time, and recommend the ways of reducing the waiting time of inpatients before elective surgical procedures, at a state government teaching hospital in India. Descriptive research methods and quality control tools were used for this prospective observational study. Descriptive statistics, Shapiro-Wilk test of normality, Wilcoxon-Mann-Whitney Test, and Kruskal-Wallis test were used. Pareto charts were used to highlight the most important modifiable factors among the set of factors causing increased waiting time. We also applied the M/M/c model (Erlang - A model) of queue theory to analyze the traffic intensity and system congestion. The median waiting time of inpatients before elective surgery was 12 days (interquartile range = 11.5 days). The waiting time was influenced significantly (P < 0.05) by the patient's age, physical status, and the financial status. The surgical specialty, blood product booking and procurement, cross-specialty consultation before surgery, and Intensive Care Unit booking were the other important factors. Modifiable and nonmodifiable factors affecting the inpatient waiting time of surgical patients were identified. Control measures that can reduce the waiting time of inpatients before elective surgery were identified.

Pain and fear avoidance partially mediate change in muscle strength during resistance exercise in women with fibromyalgia.

PubMed

Larsson, Anette; Palstam, Annie; Löfgren, Monika; Ernberg, Malin; Bjersing, Jan; Bileviciute-Ljungar, Indre; Gerdle, Björn; Kosek, Eva; Mannerkorpi, Kaisa

2017-11-21

Resistance exercise results in health benefits in fibromyalgia. The aim of this study was to determine the factors that mediate change in muscle strength in women with fibromyalgia as a result of resistance exercise. Sixty-seven women with fibromyalgia (age range 25-64 years) were included. Tests of muscle strength and questionnaires related to pain, fear avoidance and physical activity were carried out. Multivariable stepwise regression was used to analyse explanatory factors for change and predictors for final values of knee-extension force, elbow-flexion force and hand-grip force. Change in knee-extension force was explained by fear avoidance beliefs about physical activity at baseline, together with change in pain intensity, knee-extension force at baseline, age and body mass index (BMI) (R2=0.40, p = 0.013). Change in elbow-flexion force was explained by pain intensity at baseline, together with baseline fear avoidance beliefs about physical activity, BMI and elbow-flexion force at baseline (R2 = 0.32, p = 0.043). Change in hand-grip force was explained by hand-grip force at baseline, change in pain intensity and baseline fear avoidance (R2 = 0.37, p = 0.009). Final muscle strength was predicted by the same variables as change, except pain. Pain and fear avoidance are important factors to consider in rehabilitation using resistance exercise for women with fibromyalgia.

Canopy storage capacity of xerophytic shrubs in Northwestern China

NASA Astrophysics Data System (ADS)

Wang, Xin-ping; Zhang, Ya-feng; Hu, Rui; Pan, Yan-xia; Berndtsson, Ronny

2012-08-01

SummaryThe capacity of shrub canopy water storage is a key factor in controlling the rainfall interception. Thus, it affects a variety of hydrological processes in water-limited arid desert ecosystems. Vast areas of revegetated desert ecosystems in Northwestern China are occupied by shrub and dwarf shrub communities. Yet, data are still scarce regarding their rainwater storage capacity. In this study, simulated rainfall tests were conducted in controlled conditions for three dominant xerophytic shrub types in the arid Tengger Desert. Eight rainfall intensities varying from 1.15 to 11.53 mm h-1 were used to determine the canopy water storage capacity. The simulated rainfall intensities were selected according to the long-term rainfall records in the study area. The results indicate that canopy storage capacity (expressed in water storage per leaf area, canopy projection area, biomass, and volume of shrub respectively) increased exponentially with increase in rainfall intensity for the selected shrubs. Linear relationships were found between canopy storage capacity and leaf area (LA) or leaf area index (LAI), although there was a striking difference in correlation between storage capacity and LA or LAI of Artemisia ordosica compared to Caragana korshinskii and Hedysarum scoparium. This is a result of differences in biometric characteristics, especially canopy morphology between the shrub species. Pearson correlation coefficient indicated that LA and dry biomass are better predictors as compared to canopy projection area and volume of samples for precise estimation of canopy water storage capacity. In terms of unit leaf area, mean storage capacity was 0.39 mm (range of 0.24-0.53 mm), 0.43 mm (range of 0.28-0.60 mm), and 0.61 mm (range of 0.29-0.89 mm) for C. korshinskii, H. scoparium, and A. ordosica, respectively. Correspondingly, divided per unit dry biomass, mean storage capacity was 0.51 g g-1 (range of 0.30-0.70 g g-1), 0.41 g g-1 (range of 0.26-0.57 g g-1), and 0.73 g g-1 (range of 0.38-1.05 g g-1) for C. korshinskii, H. scoparium, and A. ordosica, respectively, when the rainfall intensities ranged from 1.15, 2.31, 3.46, 4.61, 6.92, 9.23 to 11.53 mm h-1. The needle-leaved species A. ordosica had a higher canopy water storage capacity than the ovate-leaved species C. korshinskii and H. scoparium at the same magnitude of rainfall intensity, except for C. korshinskii when it was expressed in unit of canopy projection area. Consequently, A. ordosica will generate higher interception losses as compared to C. korshinskii and H. scoparium. This is especially the case as it often forms dense dwarf shrub communities despite its small size.

Long-Range Coulomb Effect in Intense Laser-Driven Photoelectron Dynamics.

PubMed

Quan, Wei; Hao, XiaoLei; Chen, YongJu; Yu, ShaoGang; Xu, SongPo; Wang, YanLan; Sun, RenPing; Lai, XuanYang; Wu, ChengYin; Gong, QiHuang; He, XianTu; Liu, XiaoJun; Chen, Jing

2016-06-03

In strong field atomic physics community, long-range Coulomb interaction has for a long time been overlooked and its significant role in intense laser-driven photoelectron dynamics eluded experimental observations. Here we report an experimental investigation of the effect of long-range Coulomb potential on the dynamics of near-zero-momentum photoelectrons produced in photo-ionization process of noble gas atoms in intense midinfrared laser pulses. By exploring the dependence of photoelectron distributions near zero momentum on laser intensity and wavelength, we unambiguously demonstrate that the long-range tail of the Coulomb potential (i.e., up to several hundreds atomic units) plays an important role in determining the photoelectron dynamics after the pulse ends.

Long-Range Coulomb Effect in Intense Laser-Driven Photoelectron Dynamics

PubMed Central

Quan, Wei; Hao, XiaoLei; Chen, YongJu; Yu, ShaoGang; Xu, SongPo; Wang, YanLan; Sun, RenPing; Lai, XuanYang; Wu, ChengYin; Gong, QiHuang; He, XianTu; Liu, XiaoJun; Chen, Jing

2016-01-01

In strong field atomic physics community, long-range Coulomb interaction has for a long time been overlooked and its significant role in intense laser-driven photoelectron dynamics eluded experimental observations. Here we report an experimental investigation of the effect of long-range Coulomb potential on the dynamics of near-zero-momentum photoelectrons produced in photo-ionization process of noble gas atoms in intense midinfrared laser pulses. By exploring the dependence of photoelectron distributions near zero momentum on laser intensity and wavelength, we unambiguously demonstrate that the long-range tail of the Coulomb potential (i.e., up to several hundreds atomic units) plays an important role in determining the photoelectron dynamics after the pulse ends. PMID:27256904

Compliance calibration of the short rod chevron-notch specimen for fracture toughness testing of brittle materials

NASA Technical Reports Server (NTRS)

Bubsey, R. T.; Pierce, W. S.; Shannon, J. L., Jr.; Munz, D.

1982-01-01

The short rod chevron-notch specimen has the advantages of (1) crack development at the chevron tip during the early stage of test loading, and (2) convenient calculation of plane-strain fracture toughness from the maximum test load and from a calibration factor which depends only on the specimen geometry and manner of loading. For generalized application, calibration of the specimen over a range of specimen proportions and chevron-notch configurations is necessary. Such was the objective of this investigation, wherein calibration of the short rod specimen was made by means of experimental compliance measurements converted into dimensionless stress intensity factor coefficients.

Mass extinctions: Persistent problems and new directions

NASA Technical Reports Server (NTRS)

Jablonski, D.

1994-01-01

Few contest that mass extinctions have punctuated the history of life, or that those events were so pervasive environmentally, taxonomically, and geographically that physical forcing factors were probably involved. However, consensus remains elusive on the nature of those factors, and on how a given perturbation - impact, volcanism, sea-level change, or ocean anoxic event - could actually generate the observed intensity and selectivity of biotic losses. At least two basic problems underlie these long-standing disagreements: difficulties in resolving the fine details of taxon ranges and abundances immediately prior to and after an extinction boundary and the scarcity of simple, unitary cause-and-effect relations in complex biological systems.

Measurement properties and implementation of a checklist to assess leadership skills during interdisciplinary rounds in the intensive care unit.

PubMed

Ten Have, Elsbeth C M; Nap, Raoul E; Tulleken, Jaap E

2015-01-01

The implementation of interdisciplinary teams in the intensive care unit (ICU) has focused attention on leadership behavior. A daily recurrent situation in ICUs in which both leadership behavior and interdisciplinary teamwork are integrated concerns the interdisciplinary rounds (IDRs). Although IDRs are recommended to provide optimal interdisciplinary and patient-centered care, there are no checklists available for leading physicians. We tested the measurement properties and implementation of a checklist to assess the quality of leadership skills in interdisciplinary rounds. The measurement properties of the checklist, which included 10 essential quality indicators, were tested for interrater reliability and internal consistency and by factor analysis. The interrater reliability among 3 raters was good (κ, 0.85) and the internal consistency was acceptable (α, 0.74). Factor analysis showed all factor loadings on 1 domain (>0.65). The checklist was further implemented during videotaped IDRs which were led by senior physicians and in which 99 patients were discussed. Implementation of the checklist showed a wide range of "no" and "yes" scores among the senior physicians. These results may underline the need for such a checklist to ensure tasks are synchronized within the team.

Comprehensive Validation of an Intermittency Transport Model for Transitional Low-Pressure Turbine Flows

NASA Technical Reports Server (NTRS)

Suzen, Y. B.; Huang, P. G.

2005-01-01

A transport equation for the intermittency factor is employed to predict transitional flows under the effects of pressure gradients, freestream turbulence intensities, Reynolds number variations, flow separation and reattachment. and unsteady wake-blade interactions representing diverse operating conditions encountered in low-pressure turbines. The intermittent behaviour of the transitional flows is taken into account and incorporated into computations by modifying the eddy viscosity, Mu(sub t), with the intermittency factor, gamma. Turbulent quantities are predicted by using Menter's two-equation turbulence model (SST). The onset location of transition is obtained from correlations based on boundary-layer momentum thickness, acceleration parameter, and turbulence intensity. The intermittency factor is obtained from a transport model which can produce both the experimentally observed streamwise variation of intermittency and a realistic profile in the cross stream direction. The intermittency transport model is tested and validated against several well documented low pressure turbine experiments ranging from flat plate cases to unsteady wake-blade interaction experiments. Overall, good agreement between the experimental data and computational results is obtained illustrating the predicting capabilities of the model and the current intermittency transport modelling approach for transitional flow simulations.

Influence of dust particles on the neon spectral line intensities at the uniform positive column of dc discharge at the space apparatus “Plasma Kristall-4”

NASA Astrophysics Data System (ADS)

Usachev, A. D.; Zobnin, A. V.; Shonenkov, A. V.; Lipaev, A. M.; Molotkov, V. I.; Petrov, O. F.; Fortov, V. E.; Pustyl'nik, M. Y.; Fink, M. A.; Thoma, M. A.; Thomas, H. M.; Padalka, G. I.

2018-01-01

Influence of the elongated dust cloud on the intensities of different neon spectral lines in visible and near ir spectral ranges in the uniform positive column has been experimentally investigated using the Russian-European space apparatus “Plasma Kristall-4” (SA PK-4) on board of the International Space Station (ISS). The investigation was performed in the low pressure (0.5 mbar) direct current (dc, 1 mA) gas discharge in neon. Microgravity allowed us to perform experiments with a large dust cloud in the steady-state regime. To avoid the dust cloud drift in the dc electric field a switching dc polarity discharge mode has been applied. During the experiment a dust cloud of 9 mm in diameter in the discharge tube of 30 mm in diameter with the length of about 100 mm has been observed in the steady-state regime. In this regard, the intensities of neon spectral lines corresponding to 3p → 3s electronic transitions have increased by a factor of 1.4 times, while the intensities of neon spectral lines corresponding to 3d → 3p electronic transitions have increased by a factor of 1.6 times. The observed phenomenon is explained on the basis of the Schottky approach by a self-consistent rising dc electric field in the dusty plasma cloud resulting in an increase of the electron temperature.

Investigating the Relation between Sunspots and Umbral Dots

NASA Astrophysics Data System (ADS)

Yadav, Rahul; Louis, Rohan E.; Mathew, Shibu K.

2018-03-01

Umbral dots (UDs) are transient, bright features observed in the umbral region of a sunspot. We study the physical properties of UDs observed in sunspots of different sizes. The aim of our study is to relate the physical properties of UDs with the large-scale properties of sunspots. For this purpose, we analyze high-resolution G-band images of 42 sunspots observed by Hinode/SOT, located close to disk center. The images were corrected for instrumental stray light and restored with the modeled point-spread function. An automated multilevel tracking algorithm was employed to identify the UDs located in selected G-band images. Furthermore, we employed Solar Dynamics Observatory/HMI, limb-darkening-corrected, full-disk continuum images to estimate the sunspot phase and epoch for the selected sunspots. The number of UDs identified in different umbrae exhibits a linear relation to the umbral size. The observed filling factor ranges from 3% to 7% and increases with the mean umbral intensity. Moreover, the filling factor shows a decreasing trend with the umbral size. We also found that the observed mean and maximum intensities of UDs are correlated with the mean umbral intensity. However, we do not find any significant relationship between the mean (and maximum) intensity and effective diameter of UDs and the sunspot area, epoch, and decay rate. We suggest that this lack of relation could be due to either the distinct transition of spatial scales associated with overturning convection in the umbra or the shallow depth associated with UDs, or both.

The origin and evolution of dust clouds in Central Asia

USGS Publications Warehouse

Smirnov, V.V.; Gillette, Dale A.; Golitsyn, G.S.; MacKinnon, D.J.

1994-01-01

Data from a high resolution radiometer AVHRR (580-680 nm optical lengthwaves) installed on the "NOAA-11" satellite as well as TV (500-700 nm) and IR (8000-12000 nm) equipment of the Russia satellite "Meteor-2/16" were used to study the evolution of dust storms for 1-30 September 1989 in Tajikistan, Uzbekistan, Turkmenistan and Afghanistan. These data help to validate the hypothesis, that long-term dusted boundary layer (duration of the order of a day or more), but of comparatively not high optical density (4-10 km meteorological visibility range at the 20-50 km background), is formed after the northwest intrusions into a region of intensive cold fronts at the surface wind velocities of 7-15 m/s. Stability of dust clouds of vertical power to 3-3.5 km (up to an inversion level) is explained by an action of collective buoyancy factors at heating the dust particles of 2-4 ??m in mean diameter by solar radiation. The more intensive intrusions stimulate a formation of simultaneously dust and water clouds. The last partially reduce the solar radiation (by the calculations of the order of 30-50%) and decrease the role of buoyancy factors. Thus, initiated is the intensive but short-term dusted boundary layer at horizontal visibility of 50-200 m. ?? 1994.

[Habitat suitability index model and minimum habitat area estimation of young Procypris rabaudi (Tchang): a simulation experiment in laboratory].

PubMed

Feng, Xian-Bin; Zhu, Yong-Jiu; Li, Xi; He, Yong-Feng; Zhao, Jian-Hua; Yang, De-Guo

2013-01-01

Under the conditions of simulated micro-habitat in laboratory, and by using experimental ecological methods, this paper evaluated the suitability index (HSI) of young Procypris rabaudi for habitat factors (substrate, light intensity and water depth). The habitat suitability models of the young P. rabaudi were established, and the minimum habitat area of the young P. rabaudi was estimated. The young P. rabaudi preferred the habitats with the gravel diameter from 10 to 15 cm, light intensity from 0.2 to 1.8 lx, and water depth from 0 to 15 cm (distance from the bottom of the tank). The three suitability index models of the substrate, light intensity and water depth for the young P. rabaudi were SI(s) = 1.7338e(-0.997x)(SI(S) is the suitability index of substrate, and x is the gravel diameter; R2 = 0.89, P < 0.01), SI(L) = 3.0121e(-1.339x)(SI(L) is the suitability index of light intensity, and x is the light intensity; R2 = 0.93, P < 0.01), and SI(W) = 2.4055e(-1.245x)(SI(W) is the suitability index of water depth, and x is the water depth; R2 = 0.97, P < 0.01), respectively. Arithmetic mean model HSI = (SI(S)+SI(L)+SI(W))/3 was most available for the estimation of the habitat suitability of young P. rabaudi. A total of seven groups of young P. rabaudi which established and maintained a relatively stable habitat area range were found. This habitat area ranged from 628 to 2015 cm2, with an average of 1114 cm2.

Stress-intensity factor equations for cracks in three-dimensional finite bodies

NASA Technical Reports Server (NTRS)

Newman, J. C., Jr.; Raju, I. S.

1981-01-01

Empirical stress intensity factor equations are presented for embedded elliptical cracks, semi-elliptical surface cracks, quarter-elliptical corner cracks, semi-elliptical surface cracks at a hole, and quarter-elliptical corner cracks at a hole in finite plates. The plates were subjected to remote tensile loading. Equations give stress intensity factors as a function of parametric angle, crack depth, crack length, plate thickness, and where applicable, hole radius. The stress intensity factors used to develop the equations were obtained from three dimensional finite element analyses of these crack configurations.

Automatic localization of cochlear implant electrodes in CTs with a limited intensity range

NASA Astrophysics Data System (ADS)

Zhao, Yiyuan; Dawant, Benoit M.; Noble, Jack H.

2017-02-01

Cochlear implants (CIs) are neural prosthetics for treating severe-to-profound hearing loss. Our group has developed an image-guided cochlear implant programming (IGCIP) system that uses image analysis techniques to recommend patientspecific CI processor settings to improve hearing outcomes. One crucial step in IGCIP is the localization of CI electrodes in post-implantation CTs. Manual localization of electrodes requires time and expertise. To automate this process, our group has proposed automatic techniques that have been validated on CTs acquired with scanners that produce images with an extended range of intensity values. However, there are many clinical CTs acquired with a limited intensity range. This limitation complicates the electrode localization process. In this work, we present a pre-processing step for CTs with a limited intensity range and extend the methods we proposed for full intensity range CTs to localize CI electrodes in CTs with limited intensity range. We evaluate our method on CTs of 20 subjects implanted with CI arrays produced by different manufacturers. Our method achieves a mean localization error of 0.21mm. This indicates our method is robust for automatic localization of CI electrodes in different types of CTs, which represents a crucial step for translating IGCIP from research laboratory to clinical use.

Risk Factors and Predictors for Candidemia in Pediatric Intensive Care Unit Patients: Implications for Prevention

PubMed Central

Zaoutis, Theoklis E.; Prasad, Priya A.; Localio, A. Russell; Coffin, Susan E.; Bell, Louis M.; Walsh, Thomas J.; Gross, Robert

2013-01-01

Summary Few data exist on risk factors for candidemia in pediatric intensive care unit (PICU) patients who are at high risk of mortality from infection. We conducted a population-based case-control study to determine risk factors and predictors for candidemia in the PICU. Background Candida species are the leading cause of invasive fungal infections in hospitalized children and are the third most common isolates recovered from pediatric healthcare-associated bloodstream infection in the US [1]. Few data exist on risk factors for candidemia in pediatric intensive care unit (PICU) patients. Methods We conducted a population-based case-control study of PICU patients at Children's Hospital of Philadelphia (CHOP) from 1997-2004. Cases were identified using laboratory records, controls were selected from PICU rosters. Controls were matched to cases by incidence density sampling, adjusting for time at risk. Following conditional multivariate analysis, we performed weighted multivariate analysis to determine predicted probabilities for candidemia given certain risk factor combinations. Results We identified 101 cases of candidemia(incidence,3.5/1,000 PICU admissions). Factors independently associated with candidemia included presence of a central venous catheter(OR 30.4;CI,7.7,119.5), malignancy(OR 4.0;CI,1.23,13.1), use of vancomycin for >3 days in the prior two weeks(OR 6.2;CI,2.4,16), and receipt of agents with activity against anaerobic organisms for >3 days in the prior two weeks(OR 3.5;CI, 1.5,8.4). Predicted probability of various combinations of the factors above ranged from 10.7%-46%. The 30-day mortality rate was 44% in cases compared to 14% in controls (OR 4.22;CI,2.35,7.60). Conclusions To our knowledge, this is the first study to evaluate independent risk factors and to determine a population of children in PICUs at high risk for developing candidemia. Future efforts should focus on validation of these risk factors identified in a different PICU population and development of interventions for prevention of candidemia in critically ill children. PMID:20636126

The Dynamic Range Paradox: A Central Auditory Model of Intensity Change Detection

PubMed Central

Simpson, Andrew J.R.; Reiss, Joshua D.

2013-01-01

In this paper we use empirical loudness modeling to explore a perceptual sub-category of the dynamic range problem of auditory neuroscience. Humans are able to reliably report perceived intensity (loudness), and discriminate fine intensity differences, over a very large dynamic range. It is usually assumed that loudness and intensity change detection operate upon the same neural signal, and that intensity change detection may be predicted from loudness data and vice versa. However, while loudness grows as intensity is increased, improvement in intensity discrimination performance does not follow the same trend and so dynamic range estimations of the underlying neural signal from loudness data contradict estimations based on intensity just-noticeable difference (JND) data. In order to account for this apparent paradox we draw on recent advances in auditory neuroscience. We test the hypothesis that a central model, featuring central adaptation to the mean loudness level and operating on the detection of maximum central-loudness rate of change, can account for the paradoxical data. We use numerical optimization to find adaptation parameters that fit data for continuous-pedestal intensity change detection over a wide dynamic range. The optimized model is tested on a selection of equivalent pseudo-continuous intensity change detection data. We also report a supplementary experiment which confirms the modeling assumption that the detection process may be modeled as rate-of-change. Data are obtained from a listening test (N = 10) using linearly ramped increment-decrement envelopes applied to pseudo-continuous noise with an overall level of 33 dB SPL. Increments with half-ramp durations between 5 and 50,000 ms are used. The intensity JND is shown to increase towards long duration ramps (p<10−6). From the modeling, the following central adaptation parameters are derived; central dynamic range of 0.215 sones, 95% central normalization, and a central loudness JND constant of 5.5×10−5 sones per ms. Through our findings, we argue that loudness reflects peripheral neural coding, and the intensity JND reflects central neural coding. PMID:23536749

Demons deformable registration of CT and cone-beam CT using an iterative intensity matching approach

PubMed Central

Nithiananthan, Sajendra; Schafer, Sebastian; Uneri, Ali; Mirota, Daniel J.; Stayman, J. Webster; Zbijewski, Wojciech; Brock, Kristy K.; Daly, Michael J.; Chan, Harley; Irish, Jonathan C.; Siewerdsen, Jeffrey H.

2011-01-01

Purpose: A method of intensity-based deformable registration of CT and cone-beam CT (CBCT) images is described, in which intensity correction occurs simultaneously within the iterative registration process. The method preserves the speed and simplicity of the popular Demons algorithm while providing robustness and accuracy in the presence of large mismatch between CT and CBCT voxel values (“intensity”). Methods: A variant of the Demons algorithm was developed in which an estimate of the relationship between CT and CBCT intensity values for specific materials in the image is computed at each iteration based on the set of currently overlapping voxels. This tissue-specific intensity correction is then used to estimate the registration output for that iteration and the process is repeated. The robustness of the method was tested in CBCT images of a cadaveric head exhibiting a broad range of simulated intensity variations associated with x-ray scatter, object truncation, and∕or errors in the reconstruction algorithm. The accuracy of CT-CBCT registration was also measured in six real cases, exhibiting deformations ranging from simple to complex during surgery or radiotherapy guided by a CBCT-capable C-arm or linear accelerator, respectively. Results: The iterative intensity matching approach was robust against all levels of intensity variation examined, including spatially varying errors in voxel value of a factor of 2 or more, as can be encountered in cases of high x-ray scatter. Registration accuracy without intensity matching degraded severely with increasing magnitude of intensity error and introduced image distortion. A single histogram match performed prior to registration alleviated some of these effects but was also prone to image distortion and was quantifiably less robust and accurate than the iterative approach. Within the six case registration accuracy study, iterative intensity matching Demons reduced mean TRE to (2.5±2.8) mm compared to (3.5±3.0) mm with rigid registration. Conclusions: A method was developed to iteratively correct CT-CBCT intensity disparity during Demons registration, enabling fast, intensity-based registration in CBCT-guided procedures such as surgery and radiotherapy, in which CBCT voxel values may be inaccurate. Accurate CT-CBCT registration in turn facilitates registration of multimodality preoperative image and planning data to intraoperative CBCT by way of the preoperative CT, thereby linking the intraoperative frame of reference to a wealth of preoperative information that could improve interventional guidance. PMID:21626913

The Dependence of Characteristic Times of Gradual SEP Events on Their Associated CME Properties

NASA Astrophysics Data System (ADS)

Pan, Z. H.; Wang, C. B.; Xue, X. H.; Wang, Y. M.

It is generally believed that coronal mass ejections CMEs are the drivers of shocks that accelerate gradual solar energetic particles SEPs One might expect that the characteristics of the SEP intensity time profiles observed at 1 AU are determined by properties of the associated CMEs such as the radial speed and the angular width Recently Kahler statistically investigated the characteristic times of gradual SEP events observed from 1998-2002 and their associated coronal mass ejection properties Astrophys J 628 1014--1022 2005 Three characteristic times of gradual SEP events are determined as functions of solar source longitude 1 T 0 the time from associated CME launch to SEP onset at 1 AU 2 T R the rise time from SEP onset to the time when the SEP intensity is a factor of 2 below peak intensity and 3 T D the duration over which the SEP intensity is within a factor of 2 of the peak intensity However in his study the CME speeds and angular widths are directly taken from the LASCO CME catalog In this study we analyze the radial speeds and the angular widths of CMEs by an ice-cream cone model and re-investigate their correlationships with the characteristic times of the corresponding SEP events We find T R and T D are significantly correlated with radial speed for SEP events in the best-connected longitude range and there is no correlation between T 0 and CME radial speed and angular width which is consistent with Kahler s results On the other hand it s found that T R and T D are also have

Lifetimes and spatio-temporal response of protein crystals in intense X-ray microbeams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Warkentin, Matthew A.; Atakisi, Hakan; Hopkins, Jesse B.

Serial synchrotron-based crystallography using intense microfocused X-ray beams, fast-framing detectors and protein microcrystals held at 300 K promises to expand the range of accessible structural targets and to increase overall structure-pipeline throughputs. To explore the nature and consequences of X-ray radiation damage under microbeam illumination, the time-, dose- and temperature-dependent evolution of crystal diffraction have been measured with maximum dose rates of 50 MGy s −1 . At all temperatures and dose rates, the integrated diffraction intensity for a fixed crystal orientation shows non-exponential decays with dose. Non-exponential decays are a consequence of non-uniform illumination and the resulting spatial evolution of diffracted intensitymore » within the illuminated crystal volume. To quantify radiation-damage lifetimes and the damage state of diffracting crystal regions, a revised diffraction-weighted dose (DWD) is defined and it is shown that for Gaussian beams the DWD becomes nearly independent of actual dose at large doses. An apparent delayed onset of radiation damage seen in some intensity–dose curves is in fact a consequence of damage. Intensity fluctuations at high dose rates may arise from the impulsive release of gaseous damage products. Accounting for these effects, data collection at the highest dose rates increases crystal radiation lifetimes near 300 K (but not at 100 K) by a factor of ∼1.5–2 compared with those observed at conventional dose rates. Improved quantification and modeling of the complex spatio-temporal evolution of protein microcrystal diffraction in intense microbeams will enable more efficient data collection, and will be essential in improving the accuracy of structure factors and structural models.« less

Lifetimes and spatio-temporal response of protein crystals in intense X-ray microbeams

DOE PAGES

Warkentin, Matthew A.; Atakisi, Hakan; Hopkins, Jesse B.; ...

2017-10-13

Serial synchrotron-based crystallography using intense microfocused X-ray beams, fast-framing detectors and protein microcrystals held at 300 K promises to expand the range of accessible structural targets and to increase overall structure-pipeline throughputs. To explore the nature and consequences of X-ray radiation damage under microbeam illumination, the time-, dose- and temperature-dependent evolution of crystal diffraction have been measured with maximum dose rates of 50 MGy s −1 . At all temperatures and dose rates, the integrated diffraction intensity for a fixed crystal orientation shows non-exponential decays with dose. Non-exponential decays are a consequence of non-uniform illumination and the resulting spatial evolution of diffracted intensitymore » within the illuminated crystal volume. To quantify radiation-damage lifetimes and the damage state of diffracting crystal regions, a revised diffraction-weighted dose (DWD) is defined and it is shown that for Gaussian beams the DWD becomes nearly independent of actual dose at large doses. An apparent delayed onset of radiation damage seen in some intensity–dose curves is in fact a consequence of damage. Intensity fluctuations at high dose rates may arise from the impulsive release of gaseous damage products. Accounting for these effects, data collection at the highest dose rates increases crystal radiation lifetimes near 300 K (but not at 100 K) by a factor of ∼1.5–2 compared with those observed at conventional dose rates. Improved quantification and modeling of the complex spatio-temporal evolution of protein microcrystal diffraction in intense microbeams will enable more efficient data collection, and will be essential in improving the accuracy of structure factors and structural models.« less

Strongyloides fuelleborni kellyi and other intestinal helminths in children from Papua New Guinea: associations with nutritional status and socioeconomic factors.

PubMed

King, Sarah E; Mascie-Taylor, C G Nicholas

2004-01-01

This survey examined the prevalence and intensity of Strongyloides fuelleborni kellyi and other intestinal helminths in children 5 years of age or under living near Kanabea, Papua New Guinea. Of 179 samples, 27% of the children tested positive for Strongyloides, with 81% of these children being a year or less in age. Overall, 68% of the children had one or more infections including Ascaris lumbricoides and hookworm (Necator americanus) as well as Strongyloides. Egg counts in the stools ranged from 100 to 98,300 eggs/ml for Strongyloides, 100 to 59,200 eggs/ml for Ascaris and 100 to 3400 eggs/ml for hookworm. There were significant associations between Strongyloides intensity and weight for age and weight for height such that children with higher intensities had, on average, lower z-scores. Relationships between the prevalence of helminth infections and socioeconomic factors were also observed. Logistic regression models showed that children living farther away from Kanabea (more than 2 hours' walking distance), in smaller households (5 or less people) and with uneducated mothers best predict children with Strongyloides. Two of these variables also predicted the presence of hookworm: maternal education and household size. However, in contrast to Strongyloides, a larger household size (6 or more people) was significantly associated with the presence of hookworm. House type was associated with the prevalence of Ascaris, with children living in houses with tin roofs being less likely to have Ascaris than those living in traditional houses. In addition, maternal education was associated with Ascaris intensity in those children with infection, such that the mean intensities were greater in children of uneducated mothers.

Crack growth induced by thermal-mechanical loading

NASA Astrophysics Data System (ADS)

John, R.; Hartman, G. A.; Gallagher, J. P.

1992-06-01

Advanced aerospace structures are often subjected to combined thermal and mechanical loads. The fracture-mechanics behavior of the structures may be altered by the thermal state existing around the crack. Hence, design of critical structural elements requires the knowledge of stress-intensity factors under both thermal and mechanical loads. This paper describes the development of an experimental technique to verify the thermal-stress-intensity factor generated by a temperature gradient around the crack. Thin plate specimens of a model material (AISI-SAE 1095 steel) were used for the heat transfer and thermal-mechanical fracture tests. Rapid thermal loading was achieved using high-intensity focused infrared spot heaters. These heaters were also used to generate controlled temperature rates for heat-transfer verification tests. The experimental results indicate that thermal loads can generate stress-intensity factors large enough to induce crack growth. The proposed thermal-stress-intensity factors appear to have the same effect as the conventional mechanical-stress-intensity factors with respect to fracture.

On the consideration of scaling properties of extreme rainfall in Madrid (Spain) for developing a generalized intensity-duration-frequency equation and assessing probable maximum precipitation estimates

NASA Astrophysics Data System (ADS)

Casas-Castillo, M. Carmen; Rodríguez-Solà, Raúl; Navarro, Xavier; Russo, Beniamino; Lastra, Antonio; González, Paula; Redaño, Angel

2018-01-01

The fractal behavior of extreme rainfall intensities registered between 1940 and 2012 by the Retiro Observatory of Madrid (Spain) has been examined, and a simple scaling regime ranging from 25 min to 3 days of duration has been identified. Thus, an intensity-duration-frequency (IDF) master equation of the location has been constructed in terms of the simple scaling formulation. The scaling behavior of probable maximum precipitation (PMP) for durations between 5 min and 24 h has also been verified. For the statistical estimation of the PMP, an envelope curve of the frequency factor ( k m ) based on a total of 10,194 station-years of annual maximum rainfall from 258 stations in Spain has been developed. This curve could be useful to estimate suitable values of PMP at any point of the Iberian Peninsula from basic statistical parameters (mean and standard deviation) of its rainfall series. [Figure not available: see fulltext.

The Sense of Being Watched Is Modulated by Arousal and Duration of the Perceptual Episode

PubMed Central

Carbon, Claus-Christian; Hecht, Heiko

2017-01-01

The mere presence of a depiction of eyes can elicit a sense of being watched in the perceiver. To this date, the factors affecting the intensity of this sense of being watched, however, have not been investigated. In the present experiment, we tested the impact of two potentially relevant variables: arousal (manipulated using specific musical pieces) and duration of the perceptual episode (manipulated using presentation times of 200 ms and 10 s, respectively). We asked participants to report how intensely they felt being watched while we exposed them to various observation cues ranging from human eyes to surveillance cameras. We found that, on average, reported intensities were higher if participants were in a state of relatively higher arousal and if the perceptual episode during which the respective observation cues were presented lasted long enough (10 s) to allow more than a first glance. Scientific and practical implications are briefly discussed. PMID:29230277

Fixed, object-specific intensity compensation for cone beam optical CT radiation dosimetry

NASA Astrophysics Data System (ADS)

Dekker, Kurtis H.; Hazarika, Rubin; Silveira, Matheus A.; Jordan, Kevin J.

2018-03-01

Optical cone beam computed tomography (CT) scanning of radiochromic gel dosimeters, using a CCD camera and a low stray light convergent source, provides fast, truly 3D radiation dosimetry with high accuracy. However, a key limiting factor in radiochromic gel dosimetry at large (⩾10 cm diameter) volumes is the initial attenuation of the dosimeters. It is not unusual to observe a 5–10×  difference in signal intensity through the dosimeter center versus through the surrounding medium in pre-irradiation images. Thus, all dosimetric information in a typical experiment is measured within the lower 10%–20% of the camera sensor’s range, and re-use of gels is often not possible due to a lack of transmission. To counteract this, in this note we describe a simple method to create source compensators by printing on transparent films. This technique, which is easily implemented and inexpensive, is an optical analogue to the bowtie filter in x-ray CT. We present transmission images and solution phantom reconstructions to demonstrate that (1) placing compensators beyond the focal zone of the imaging lens prevents high spatial frequency features of the printed films from generating reconstruction artifacts, and (2) object-specific compensation considerably reduces the range of intensities measured in projection images. This will improve the measurable dose range in optical CT dosimetry, and will enable imaging of larger gel volumes (∼15 cm diameter). Additionally, it should enable re-use of dosimeters by printing a new compensator for a second experiment.

Pain extent and function in youth with physical disabilities

PubMed Central

Miró, Jordi; de la Vega, Rocío; Tomé-Pires, Catarina; Sánchez-Rodríguez, Elisabet; Castarlenas, Elena; Jensen, Mark P; Engel, Joyce M

2017-01-01

Background The aim of this study was to increase our understanding of the role that spatial qualities of pain (location and extent) play in functioning, among youths with disabilities and chronic pain. Methods One-hundred and fifteen youths (mean age 14.4 years; SD ±3.3 years) with physical disabilities and chronic pain were interviewed and were asked to provide information about pain locations and their average pain intensity in the past week, and to complete measures of pain interference, psychological function and disability. Most of the participants in this sample were males (56%), Caucasian (68%), and had a cerebral palsy (34%) or muscular dystrophy (25%) problem. Most participants did not report high levels of disability ( X¯=12.7, SD ±9.5, range 0–60) or global pain intensity ( X¯=3.2, SD ±2.4, range 0–10). Results Pain at more than one body site was experienced by 91% of participants. There were positive associations between pain extent with pain interference (r = 0.30) and disability (r = 0.30), and a negative association with psychological function (r = –0.38), over and above average pain intensity. Additionally, pain intensity in the back (as opposed to other locations) was associated with more pain interference (r = 0.29), whereas pain intensity in the shoulders was associated with less psychological function (r = –0.18), and pain intensity in the bottom or hips was associated with more disability (r = 0.29). Conclusion The findings support the need to take into account pain extent in the assessment and treatment of youths with physical disabilities and chronic pain, call our attention about the need to identify potential risk factors of pain extent, and develop and evaluate the benefits of treatments that could reduce pain extent and target pain at specific sites. PMID:28115871

The intensity of physical activity influences bone mineral accrual in childhood: the childhood health, activity and motor performance school (the CHAMPS) study, Denmark.

PubMed

Heidemann, Malene; Mølgaard, Christian; Husby, Steffen; Schou, Anders J; Klakk, Heidi; Møller, Niels Chr; Holst, René; Wedderkopp, Niels

2013-03-02

Studies indicate genetic and lifestyle factors can contribute to optimal bone development. In particular, the intensity level of physical activity may have an impact on bone health. This study aims to assess the relationship between physical activity at different intensities and Bone Mineral Content (BMC), Bone Mineral Density (BMD) and Bone Area (BA) accretion. This longitudinal study is a part of The CHAMPS study-DK. Whole-body DXA scans were performed at baseline and after two years follows up. BMC, BMD, and BA were measured. The total body less head (TBLH) values were used. Physical activity (PA) was recorded by accelerometers (ActiGraph, model GT3X). Percentages of different PA intensity levels were calculated and log odds of two intensity levels of activity relative to the third level were calculated. Multilevel regression analyses were used to assess the relationship between the categories of physical activity and bone traits. Of 800 invited children, 742 (93%) accepted to participate. Of these, 682/742 (92%) participated at follow up. Complete datasets were obtained in 602/742 (81%) children. Mean (range) of age was 11.5 years (9.7-13.9). PA at different intensity levels was for boys and girls respectively, sedentary 62% and 64%, low 29% for both genders and moderate to high 9% and 7% of the total time. Mean (range) BMC, BMD, and BA was 1179 g (563-2326), 0.84 g/cm2 (0.64-1.15) and 1393 cm2 (851-2164), respectively. Valid accelerometer data were obtained for a mean of 6.1 days, 13 hours per day. There 7was a positive relationship between the log odds of moderate to high-level PA versus low level activity and BMC, BMD and BA. Children with an increased proportion of time in moderate to high-level activity as opposed to sedentary and low-level activity achieved positive effects on BMC, BMD and BA.

Threshold and Beyond: Modeling The Intensity Dependence of Auditory Responses

PubMed Central

2007-01-01

In many studies of auditory-evoked responses to low-intensity sounds, the response amplitude appears to increase roughly linearly with the sound level in decibels (dB), corresponding to a logarithmic intensity dependence. But the auditory system is assumed to be linear in the low-intensity limit. The goal of this study was to resolve the seeming contradiction. Based on assumptions about the rate-intensity functions of single auditory-nerve fibers and the pattern of cochlear excitation caused by a tone, a model for the gross response of the population of auditory nerve fibers was developed. In accordance with signal detection theory, the model denies the existence of a threshold. This implies that regarding the detection of a significant stimulus-related effect, a reduction in sound intensity can always be compensated for by increasing the measurement time, at least in theory. The model suggests that the gross response is proportional to intensity when the latter is low (range I), and a linear function of sound level at higher intensities (range III). For intensities in between, it is concluded that noisy experimental data may provide seemingly irrefutable evidence of a linear dependence on sound pressure (range II). In view of the small response amplitudes that are to be expected for intensity range I, direct observation of the predicted proportionality with intensity will generally be a challenging task for an experimenter. Although the model was developed for the auditory nerve, the basic conclusions are probably valid for higher levels of the auditory system, too, and might help to improve models for loudness at threshold. PMID:18008105

[The physiological classification of human thermal states under high environmental temperatures].

PubMed

Bobrov, A F; Kuznets, E I

1995-01-01

The paper deals with the physiological classification of human thermal states in a hot environment. A review of the basic systems of classifications of thermal states is given, their main drawbacks are discussed. On the basis of human functional state research in a broad range of environmental temperatures the system of evaluation and classification of human thermal states is proposed. New integral one-dimensional multi-parametric criteria for evaluation are used. For the development of these criteria methods of factor, cluster and canonical correlation analyses are applied. Stochastic nomograms capable of identification of human thermal state for different intensity of influence are given. In this case evaluation of intensity is estimated according to one-dimensional criteria taking into account environmental temperature, physical load and time of man's staying in overheating conditions.

[Species specificity, age factors, and various neurochemical correlates of the animal spontaneous behavior after exposure to electromagnetic field of the ultralow intensity].

PubMed

Shtemberg, A S; Uzbekov, M G; Shikhov, S N; Bazian, A S; Cherniakov, G M

2000-01-01

Behavioral and neurochemical reactions of small laboratory animals (mice and rats of different age) under exposure to ultralow-intensity electromagnetic fields (EMF, frequency of 4200 and 970 MHz, modulated by a quasistochastic signal in the range of 20-20,000 Hz, power density 15 microW/cm2, specific body absorption rate up to 4.5 mJ/kg) were studied. The EMF basically inhibited the locomotor and exploratory activity in the "open-field" test. The species- and age-specific features rather than radiation conditions dominated. However, decrease in the EMF frequency considerably intensified the observed effect. Change in animal behavior was accompanied by shifts in neurochemical processes, i.e., sharp activation of serotoninergic and inhibition of morepinephrinergic system.

Tailpipe, resuspended road dust, and brake-wear emission factors from on-road vehicles

NASA Astrophysics Data System (ADS)

Abu-Allaban, Mahmoud; Gillies, John A.; Gertler, Alan W.; Clayton, Russ; Proffitt, David

Intensive mass and chemical measurements were performed at roadside locations in Reno, Nevada, and Durham/Research Triangle Park), North Carolina to derive tailpipe, resuspended road dust, and brake-wear emission factors from in-use vehicles. Continuous particulate matter (PM) data were utilized to derive total emission factors while integrated PM data were used to attribute the calculated emission factors to different mechanisms using chemical mass balance receptor modeling and scanning electron microscopy techniques. Resuspended road dust and tailpipe emissions were found to be the dominant mechanisms that contribute significantly to the total PM 10 and PM 2.5 emission factors, respectively. Small contributions from brake-wear were observed at locations where strong braking occurs, but no tire-wear was seen at any sampling location. PM 10 emission rates from light-duty spark ignition (LDSI) vehicles ranged from 40 to 780 mg/km, 10 to 70 mg/km, and 0 to 80 mg/km per vehicle for road dust, tailpipe, and brake-wear, respectively. PM 10 emission rates from heavy-duty vehicles ranged from 230 to 7800 mg/km, 60 to 570 mg/km, and 0 to 610 mg/km per vehicle for road dust, tailpipe, and brake-wear, respectively. PM 2.5 emission rates from LDSI vehicles ranged from 2 to 25 mg/km, 10 to 50 mg/km, and 0 to 5 mg/km per vehicle for road dust, tailpipe, and brake-wear, respectively. PM 2.5 emission rates from heavy-duty vehicles ranged from 15 to 300 mg/km, 60 to 480 mg/km, and 0 to 15 mg/km per vehicle for road dust, tailpipe, and brake-wear, respectively.

Evaluation of Work-related Psychosocial and Ergonomics Factors in Relation to Low Back Discomfort in Emergency Unit Nurses

PubMed Central

Habibi, Ehsanollah; Pourabdian, Siamak; Atabaki, Azadeh Kianpour; Hoseini, Mohsen

2012-01-01

Background and Aim: High prevalence of low back pain is one of the most common problems among nurses. The aim of this study was to evaluate the relation of the intensity of low back discomfort to two low back pain contributor factors (Ergonomics risk factors and psychosocial factors). Methods: This cross-sectional survey was conducted on 120 emergency unit nurses in Esfahan. Job content, ergonomics hazards and nordic questionnaire were used in that order for daily assessment of Psychosocial and Ergonomics factors and the intensity of low back discomfort. Nurses were questioned during a 5-week period, at the end of each shift work. The final results were analyzed with SPSS software18/PASW by using Spearman, Mann-Whitney and Kolmogorov-Smirnove test. Results: There was a significant relationship between work demand, job content, social support and intensity of low back discomfort (P value <0.05). But, there was not any link between intensity of low back discomfort and job control. Also, there was significant relationship between intensity of low back discomfort and ergonomics risk factors. Conclusion: This study showed an indirect relationship between the intensity of low back discomfort and social support. This study also confirmed a direct relationship between the intensity of low back discomfort and work demand, job content, ergonomics factors (Awkward Postures (rotating and bending), manual patient handling and repetitiveness, standing continuously more than 30 min). So, to decrease work related low back discomfort, psychosocial factors should be attended in addition to ergonomics factors. PMID:22973487

Target Plate Material Influence on Fullerene-C60 Laser Desorption/Ionization Efficiency

NASA Astrophysics Data System (ADS)

Zeegers, Guido P.; Günthardt, Barbara F.; Zenobi, Renato

2016-04-01

Systematic laser desorption/ionization (LDI) experiments of fullerene-C60 on a wide range of target plate materials were conducted to gain insight into the initial ion formation in matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. The positive and negative ion signal intensities of precursor, fragment, and cluster ions were monitored, varying both the laser fluence (0-3.53 Jcm-2) and the ion extraction delay time (0-950 ns). The resulting species-specific ion signal intensities are an indication for the ionization mechanisms that contribute to LDI and the time frames in which they operate, providing insight in the (MA)LDI primary ionization. An increasing electrical resistivity of the target plate material increases the fullerene-C60 precursor and fragment anion signal intensity. Inconel 625 and Ti90/Al6/V4, both highly electrically resistive, provide the highest anion signal intensities, exceeding the cation signal intensity by a factor ~1.4 for the latter. We present a mechanism based on transient electrical field strength reduction to explain this trend. Fullerene-C60 cluster anion formation is negligible, which could be due to the high extraction potential. Cluster cations, however, are readily formed, although for high laser fluences, the preferred channel is formation of precursor and fragment cations. Ion signal intensity depends greatly on the choice of substrate material, and careful substrate selection could, therefore, allow for more sensitive (MA)LDI measurements.

Aluminum nanostructures with strong visible-range SERS activity for versatile micropatterning of molecular security labels.

PubMed

Lay, Chee Leng; Koh, Charlynn Sher Lin; Wang, Jing; Lee, Yih Hong; Jiang, Ruibin; Yang, Yijie; Yang, Zhe; Phang, In Yee; Ling, Xing Yi

2018-01-03

The application of aluminum (Al)-based nanostructures for visible-range plasmonics, especially for surface-enhanced Raman scattering (SERS), currently suffers from inconsistent local electromagnetic field distributions and/or inhomogeneous distribution of probe molecules. Herein, we lithographically fabricate structurally uniform Al nanostructures which enable homogeneous adsorption of various probe molecules. Individual Al nanostructures exhibit strong local electromagnetic field enhancements, in turn leading to intense SERS activity. The average SERS enhancement factor (EF) for individual nanostructures exceeds 10 4 for non-resonant probe molecules in the visible spectrum. These Al nanostructures also retain more than 70% of their original SERS intensities after one-month storage, displaying superb stability under ambient conditions. We further achieve tunable polarization-dependent SERS responses using anisotropic Al nanostructures, facilitating the design of sophisticated SERS-based security labels. Our micron-sized security label comprises two-tier security features, including a machine-readable hybrid quick-response (QR) code overlaid with a set of ciphertexts. Our work demonstrates the versatility of Al-based structures in low-cost modern chemical nano-analytics and forgery protection.

Ultra-thin, single-layer polarization rotator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Son, T. V.; Truong, V. V., E-mail: Truong.Vo-Van@Concordia.Ca; Do, P. A.

We demonstrate light polarization control over a broad spectral range by a uniform layer of vanadium dioxide as it undergoes a phase transition from insulator to metal. Changes in refractive indices create unequal phase shifts on s- and p-polarization components of incident light, and rotation of linear polarization shows intensity modulation by a factor of 10{sup 3} when transmitted through polarizers. This makes possible polarization rotation devices as thin as 50 nm that would be activated thermally, optically or electrically.

Joint Services Electronics Program: Electronics Research at the University of Texas at Austin

DTIC Science & Technology

1990-12-31

large area 2-dimensional phased arrays , and improved beam qualities . This device structure is expected to impact laser technology over a wide range...energy. In the following pages we report on two significant accomplishments. The first involves the influence oi mirror-quantum well optical coupling on... intensity enhancements in the normal direction to the mirror of a 24 (Research Unit SSE89-1, "Growth of Ill-V Compounds by Molecular Beam Epitaxy") factor of

Closed form expressions for crack mouth displacements and stress intensity factors for chevron notched short bar and short rod specimens based on experimental compliance measurements

NASA Technical Reports Server (NTRS)

Bubsey, R. T.; Orange, T. W.; Pierce, W. S.; Shannon, J. L., Jr.

1992-01-01

A set of equations are presented describing certain fracture mechanics parameters for chevron notch bar and rod specimens. They are developed by fitting compliance calibration data reported earlier. The equations present the various parameters in their most useful forms. The data encompass the entire range of the specimen geometries most commonly used. Their use will facilitate the testing and analysis of brittle metals, ceramics, and glasses.

The Evolution of Stress Intensity Factors and the Propagation of Cracks in Elastic Media

NASA Astrophysics Data System (ADS)

Friedman, Avner; Hu, Bei; Velazquez, Juan J. L.

When a crack Γs propagates in an elastic medium the stress intensity factors evolve with the tip x(s) of Γs. In this paper we derive formulae which describe the evolution of these stress intensity factors for a homogeneous isotropic elastic medium under plane strain conditions. Denoting by ψ=ψ(x,s) the stress potential (ψ is biharmonic and has zero traction along the crack Γs) and by κ(s) the curvature of the crack at the tip x(s), we prove that the stress intensity factors A1(s), A2(s), as functions of s, satisfy: where , are stress intensity factors of the tangential derivative of in the polar coordinate system at x(s) with θ=0 in the direction of the crack at x(s). The case of antiplane shearing is also briefly considered; in this case ψ is harmonic.

Calculation of Stress Intensity Factors for Interfacial Cracks in Fiber Metal Laminates

NASA Technical Reports Server (NTRS)

Wang, John T.

2009-01-01

Stress intensity factors for interfacial cracks in Fiber Metal Laminates (FML) are computed by using the displacement ratio method recently developed by Sun and Qian (1997, Int. J. Solids. Struct. 34, 2595-2609). Various FML configurations with single and multiple delaminations subjected to different loading conditions are investigated. The displacement ratio method requires the total energy release rate, bimaterial parameters, and relative crack surface displacements as input. Details of generating the energy release rates, defining bimaterial parameters with anisotropic elasticity, and selecting proper crack surface locations for obtaining relative crack surface displacements are discussed in the paper. Even though the individual energy release rates are nonconvergent, mesh-size-independent stress intensity factors can be obtained. This study also finds that the selection of reference length can affect the magnitudes and the mode mixity angles of the stress intensity factors; thus, it is important to report the reference length used with the calculated stress intensity factors.

Surgical correction of scoliosis in children with spastic quadriplegia: benefits, adverse effects, and patient selection.

PubMed

Legg, Julian; Davies, Evan; Raich, Annie L; Dettori, Joseph R; Sherry, Ned

2014-04-01

Cerebral palsy (CP) is a group of nonprogressive syndromes of posture and motor impairment associated with lesions of the immature brain. Spastic quadriplegia is the most severe form with a high incidence of scoliosis, back pain, respiratory compromise, pelvic obliquity, and poor sitting balance. Surgical stabilization of the spine is an effective technique for correcting deformity and restoring sitting posture. The decision to operate in this group of patients is challenging. The aim of this study is to determine the benefits of surgical correction of scoliosis in children with spastic quadriplegia, the adverse effects of this treatment, and what preoperative factors affect patient outcome after surgical correction. A systematic review was undertaken to identify studies describing benefits and adverse effects of surgery in spastic quadriplegia. Factors affecting patient outcome following surgical correction of scoliosis were assessed. Studies involving adults and nonspastic quadriplegia were excluded. A total of 10 case series and 1 prospective and 3 retrospective cohort studies met inclusion criteria. There was significant variation in the overall risk of complications (range, 10.9-70.9%), mortality (range, 2.8-19%), respiratory/pulmonary complications (range, 26.9-57.1%), and infection (range, 2.5-56.8%). Factors associated with a worse outcome were a significant degree of thoracic kyphosis, days in the intensive care unit, and poor nutritional status. Caregivers report a high degree of satisfaction with scoliosis surgery for children with spastic quadriplegia. There is limited evidence of preoperative factors that can predict patient outcome after scoliosis. There is a need for well-designed prospective studies of scoliosis surgery in spastic quadriplegia.

Influence of vestibular rehabilitation on neck pain and cervical range of motion among patients with whiplash-associated disorder: a randomized controlled trial.

PubMed

Hansson, Eva Ekvall; Persson, Liselott; Malmström, Eva Maj

2013-09-01

To describe how vestibular rehabilitation influences pain and range of motion among patients with whiplash-associated disorder and dizziness, and to describe whether pain or range of motion correlated with balance performance or self-perceived dizziness handicap. A total of 29 patients, 20 women and 9 men, age range 22-76 years. Patients with whiplash-associated disorder and dizziness were randomized to either intervention (vestibular rehabilitation) or control. Neck pain intensity, cervical range of motion (CROM), balance and self-perceived dizziness handicap were measured at baseline, 6 weeks and 3 months. There were no differences in neck pain intensity or CROM between the 2 groups either at baseline, 6 weeks or 3 months (p = 0.10-0.89). At baseline, neck pain intensity correlated with CROM (-0.406) and self-perceived dizziness handicap (0.492). CROM correlated with self-perceived dizziness handicap and with 1 balance measure (-0.432). Neck pain intensity did not correlate with balance performance (-0.188-0.049). Neck pain intensity and CROM was not influenced by vestibular rehabilitation. Importantly, the programme did not appear to increase pain or decrease neck motion, as initially thought. Neck pain intensity and CROM correlated with self-perceived dizziness handicap. CROM also correlated with 1 balance measure.

Fracture under combined modes in 4340 steel

NASA Technical Reports Server (NTRS)

Shah, R. C.

1974-01-01

An experimental investigation was conducted to study the interaction of combined modes of loading on crack instability in the presence of the opening and sliding modes of stress intensity factors, the opening and tearing modes of stress intensity factors, and all three modes of stress intensity factors. Through-cracked and surface-cracked flat and round specimens, and round notched bar specimens fabricated from high strength 4340 steel were used for the investigation. The results are evaluated to determine fracture criteria under the combined modes of stress intensity factors for the 4340 steel. These results are compared with the results of other investigators obtained for different materials.

A review of chevron-notched fracture specimens

NASA Technical Reports Server (NTRS)

Newman, J. C., Jr.

1984-01-01

The historical development of chevron notched fracture specimens is reviewed. Stress intensity factors and load line displacement solutions proposed for some of these specimens are compared. The original bend bar configurations up to the present day short rod and bar specimens are reviewed. The results of an analytical round robin that was conducted on chevron-notched specimens are presented. In the round robin, stress-intensity factors for either the chevron notched round rod or square bar specimens were calculated. The consensus stress intensity factor (compliance) solution for these specimens is assessed. The stress intensity factor solutions proposed for three and four point bend chevron notched specimens are reviewed.

Stress Intensity Factors of Semi-Circular Bend Specimens with Straight-Through and Chevron Notches

NASA Astrophysics Data System (ADS)

Ayatollahi, M. R.; Mahdavi, E.; Alborzi, M. J.; Obara, Y.

2016-04-01

Semi-circular bend specimen is one of the useful test specimens for determining fracture toughness of rock and geo-materials. Generally, in rock test specimens, initial cracks are produced in two shapes: straight-edge cracks and chevron notches. In this study, the minimum dimensionless stress intensity factors of semi-circular bend specimen (SCB) with straight-through and chevron notches are calculated. First, using finite element analysis, a suitable relation for the dimensionless stress intensity factor of SCB with straight-through crack is presented based on the normalized crack length and half-distance between supports. For evaluating the validity and accuracy of this relation, the obtained results are then compared with numerical and experimental results reported in the literature. Subsequently, by performing some experiments and also finite element analysis of the SCB specimen with chevron notch, the minimum dimensionless stress intensity factor of this specimen is obtained. Using the new equation for the dimensionless stress intensity factor of SCB with straight-through crack and an analytical method, i.e., Bluhm's slice synthesis method, the minimum (critical) dimensionless stress intensity factor of chevron notched semi-circular bend specimens is calculated. Good agreement is observed between the results of two mentioned methods.

A simple method for determining stress intensity factors for a crack in bi-material interface

NASA Astrophysics Data System (ADS)

Morioka, Yuta

Because of violently oscillating nature of stress and displacement fields near the crack tip, it is difficult to obtain stress intensity factors for a crack between two dis-similar media. For a crack in a homogeneous medium, it is a common practice to find stress intensity factors through strain energy release rates. However, individual strain energy release rates do not exist for bi-material interface crack. Hence it is necessary to find alternative methods to evaluate stress intensity factors. Several methods have been proposed in the past. However they involve mathematical complexity and sometimes require additional finite element analysis. The purpose of this research is to develop a simple method to find stress intensity factors in bi-material interface cracks. A finite element based projection method is proposed in the research. It is shown that the projection method yields very accurate stress intensity factors for a crack in isotropic and anisotropic bi-material interfaces. The projection method is also compared to displacement ratio method and energy method proposed by other authors. Through comparison it is found that projection method is much simpler to apply with its accuracy comparable to that of displacement ratio method.

Factors influencing neck pain intensity in whiplash-associated disorders.

PubMed

Holm, Lena W; Carroll, Linda J; Cassidy, J David; Ahlbom, Anders

2006-02-15

Cohort study of subjects with whiplash-associated disorders (WAD). To assess the association between preinjury factors and neck pain intensity within 30 days after a motor vehicle collision. Neck pain is the main symptom in WAD. There are studies of nonspecific musculoskeletal pain suggesting that pain intensity can be modified by psychologic, personal, or social factors, but, to our knowledge, no studies have investigated the association between such factors and neck pain intensity in WAD. The subjects (n = 5970) either filed a claim or were treated for neck pain within 30 days after a collision. Neck pain intensity was measured on the visual analog scale. Fair or poor health before the collision was associated with severe neck pain in females (odds ratio 4.0, 95% confidence interval 1.8-8.9). Other associated factors in females included low education and prior neck pain. Low family income was associated with severe neck pain in males (odds ratio 2.3, 95% confidence interval 1.5-3.4), as was prior headache and being unaware of the head position at the time of collision. The results suggest that neck pain intensity in WAD seems to be influenced by several factors other than characteristics related to the injury event itself.

The social inefficiency of regulating indirect land use change due to biofuels

NASA Astrophysics Data System (ADS)

Khanna, Madhu; Wang, Weiwei; Hudiburg, Tara W.; Delucia, Evan H.

2017-06-01

Efforts to reduce the indirect land use change (ILUC) -related carbon emissions caused by biofuels has led to inclusion of an ILUC factor as a part of the carbon intensity of biofuels in a Low Carbon Fuel Standard. While previous research has provided varying estimates of this ILUC factor, there has been no research examining the economic effects and additional carbon savings from including this factor in implementing a Low Carbon Fuel Standard. Here we show that inclusion of an ILUC factor in a national Low Carbon Fuel Standard led to additional abatement of cumulative emissions over 2007-2027 by 1.3 to 2.6% (0.6-1.1 billion mega-grams carbon-dioxide-equivalent (Mg CO2e-1) compared to those without an ILUC factor, depending on the ILUC factors utilized. The welfare cost to the US of this additional abatement ranged from $61 to $187 Mg CO2e-1 and was substantially greater than the social cost of carbon of $50 Mg CO2e-1.

Measurements of energetic electron distributions in uv and ir laser plasmas. [0. 35 AND 1. 05. mu. M; 5 X 10/sup 13/ to 2 x 10/sup 15/ W/cm/sup 2/

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keck, R.L.

1985-06-01

Measurements have been made of the x-ray continuum produced by plasmas irradiated with 0.35 and 1.05 ..mu..m laser light over an intensity range of 5 x 10/sup 13/ to 2 x 10/sup 15/ W/cm/sup 2/. From the x-ray continuum, which was measured over a range of 1.5 to 300 keV, both the temperature of and fractional energy in any supra-thermal electron distributions can be obtained. The measurements show the presence of a very high temperature (20 to 60 keV) electron distribution with either 0.35 or 1.05 ..mu..m irradiation. This component, which is attributed to the presence of the two-plasmon decaymore » instability, is observed above an intensity of approximately 10/sup 14/ W/cm/sup 2/ at 1.05 ..mu..m and contains less than 0.1% of the incident laser energy. With 0.35 ..mu..m irradiation, the intensity at which this component is observed is approximately a factor of 3 higher. At 1.05 ..mu..m, this very high temperature component appears in addition to a third, 2 to 7 keV, component attributed to resonance absorption. 38 refs., 37 figs., 6 tabs.« less

Design of differential optical absorption spectroscopy long-path telescopes based on fiber optics.

PubMed

Merten, André; Tschritter, Jens; Platt, Ulrich

2011-02-10

We present a new design principle of telescopes for use in the spectral investigation of the atmosphere and the detection of atmospheric trace gases with the long-path differential optical absorption spectroscopy (DOAS) technique. A combination of emitting and receiving fibers in a single bundle replaces the commonly used coaxial-Newton-type combination of receiving and transmitting telescope. This very simplified setup offers a higher light throughput and simpler adjustment and allows smaller instruments, which are easier to handle and more portable. The higher transmittance was verified by ray-tracing calculations, which result in a theoretical factor threefold improvement in signal intensity compared with the old setup. In practice, due to the easier alignment and higher stability, up to factor of 10 higher signal intensities were found. In addition, the use of a fiber optic light source provides a better spectral characterization of the light source, which results in a lower detection limit for trace gases studied with this instrument. This new design will greatly enhance the usability and the range of applications of active DOAS instruments.

Nd3+-doped TeO2-PbF2-AlF3 glasses for laser applications

NASA Astrophysics Data System (ADS)

Lalla, E. A.; Rodríguez-Mendoza, U. R.; Lozano-Gorrín, A. D.; Sanz-Arranz, A.; Rull, F.; Lavín, V.

2016-01-01

A study of the optical properties of Nd3+ ion in TeO2-PbF2-AlF3 glasses has been carried out for different Nd3+ concentrations. Based on the Judd-Ofelt theory, intensity parameters and radiative properties were determined from the absorption spectra. Focusing on the suitability of this host for laser applications, the spectroscopic quality factor χ was obtained with a value of 1.07, a value of the order of other compositions proposed as laser hosts. For the most intense emission corresponding with the 4F3/2 → 4I11/2 transition (1.06 μm), the absorption and emission and have been calculated with values of 1.20 × 10-20 cm2, 2.08 × 10-20 cm2. A positive value for the gain cross-sections has been found for a population inversion factor γ of 0.4 in the spectral range from 1060 to 1110 nm. All these results suggest the potentially use of this system as a laser host.

A table of intensity increments.

DOT National Transportation Integrated Search

1966-01-01

Small intensity increments can be produced by adding larger intensity increments. A table is presented covering the range of small intensity increments from 0.008682 through 6.020 dB in 60 large intensity increments of 1 dB.

A pressurized cylindrical shell with a fixed end which contains an axial part-through or through crack

NASA Technical Reports Server (NTRS)

Yahsi, O. S.; Erdogan, F.

1985-01-01

In this paper a cylindrical shell having a very stiff end plate or a flange is considered. It is assumed that near the end the cylinder contains an axial flow which may be modeled as a part-through surface crack or through crack. The primary objective is to study the effect of the end constraining on the stress intensity factor which is the main fracture mechanics parameter. The applied loads acting on the cylinder are assumed to be axisymmetric. Thus the crack problem under consideration is symmetric with respect to the plane of the crack and consequently only the mode I stress intensity factors are nonzero. With this limitation, the general perturbation problem for a cylinder with a built-in end containing an axial crack is considered. Reissner's shell theory is used to formulate the problem. The part-through crack problem is treated by using a line-spring model. In the case of a crack tip terminating at the fixed end it is shown that the integral equation of the shell problem has the same generalized Cauchy kernel as the corresponding plane stress elasticity problem. Even though the problem is formulated for a general surface crack profile and arbitrary crack surface tractions, the numerical results are obtained only for a semielliptic part-through axial crack located at the inside or outside surface of the cylinder and for internal pressure acting on the cylinder. The stress intensity factors are calculated and presented for a relatively wide range of dimensionless length parameters of the problem.

Prevalence and risk factors for trachoma in Sarlahi district, Nepal.

PubMed Central

Katz, J; West, K P; Khatry, S K; LeClerq, S C; Pradhan, E K; Thapa, M D; Ram Shrestha, S; Taylor, H R

1996-01-01

AIMS: To estimate the prevalence of trachoma in preschool children in Sarlahi district, Nepal, and to identify risk factors for the disease. METHODS: A stratified random sample of 40 wards was selected for participation in a trachoma survey. Within each ward, a systematic 20% sample of children 24-76 months of age was chosen to determine the presence and severity of trachoma using the World Health Organisation grading system. RESULTS: A total of 891 children were selected and 836 (93.8%) were examined for trachoma from December 1990 to March 1991. The prevalence of active trachoma was 23.6% (21.9% follicular and 1.7% intense inflammatory). Cicatricial trachoma was not seen in this age group. The prevalence of trachoma ranged from 0 to 50% across wards with certain communities at much higher risk for trachoma than others. Three year old children had the highest prevalence of follicular (25.5%) and intense inflammatory trachoma (4.3%). Males and females had similar prevalence rates. Wards without any tube wells were at higher risk than those with one or more tube wells. Lower rates of trachoma were seen in families who lived in cement houses, had fewer people per room, more servants, more household goods, animals, and land. Hence, less access to water, crowding and lower socioeconomic status were risk factors for trachoma. CONCLUSIONS: Although follicular trachoma is prevalent, intense inflammatory trachoma is relatively rare and scarring was not observed in this preschool population. Hence, this population may not be at high risk for repeat infections leading to blindness in adulthood. PMID:9059265

High Intensity Femtosecond XUV Pulse Interactions with Atomic Clusters: Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ditmire, Todd

We propose to expand our recent studies on the interactions of intense extreme ultraviolet (XUV) femtosecond pulses with atomic and molecular clusters. The work described follows directly from work performed under BES support for the past grant period. During this period we upgraded the THOR laser at UT Austin by replacing the regenerative amplifier with optical parametric amplification (OPA) using BBO crystals. This increased the contrast of the laser, the total laser energy to ~1.2 J , and decreased the pulse width to below 30 fs. We built a new all reflective XUV harmonic beam line into expanded lab space. This enabled an increase influence by a factor ofmore » 25 and an increase in the intensity by a factor of 50. The goal of the program proposed in this renewal is to extend this class of experiments to available higher XUV intensity and a greater range of wavelengths. In particular we plan to perform experiments to confirm our hypothesis about the origin of the high charge states in these exploding clusters, an effect which we ascribe to plasma continuum lowering (ionization potential depression) in a cluster nano-­plasma. To do this we will perform experiments in which XUV pulses of carefully chosen wavelength irradiate clusters composed of only low-Z atoms and clusters with a mixture of this low-­Z atom with higher Z atoms. The latter clusters will exhibit higher electron densities and will serve to lower the ionization potential further than in the clusters composed only of low Z atoms. This should have a significant effect on the charge states produced in the exploding cluster. We will also explore the transition of explosions in these XUV irradiated clusters from hydrodynamic expansion to Coulomb explosion. The work proposed here will explore clusters of a wider range of constituents, including clusters from solids. Experiments on clusters from solids will be enabled by development we performed during the past grant period in which we constructed and tested a cluster generator based on the Laser Ablation of Microparticles (LAM) method.« less

Microbiological and chemical properties of litter from different chicken types and production systems.

PubMed

Omeira, N; Barbour, E K; Nehme, P A; Hamadeh, S K; Zurayk, R; Bashour, I

2006-08-15

Chicken litter is produced in large quantities from all types of poultry raising activities. It is primarily used for land application, thus it is essential to analyze its properties before it is released to the environment. The objective of this study is to compare the microbiological and chemical properties of litter generated from layer and broiler chickens reared under intensive and free-range production systems. The microbiological analysis consisted of the enumeration of total bacteria, total coliforms, Staphylococcus species, Salmonella species and Clostridium perfringens. Chicken litter from layers reared under intensive and free range systems showed lower mean total bacterial count than the litter collected from chicken broilers reared under either of the two systems (P=0.0291). The litter from intensive layers had the lowest mean total coliform counts (P=0.0222) while the lowest Staphylococcus species count was observed in the litter from free-range layers (P=0.0077). The C. perfringens count was the lowest in chicken litter from intensively raised broilers and layers (P=0.0001). The chemical properties of litter from the different chicken types and production systems were compared based on determination of pH, electrical conductivity, carbon, nitrogen, phosphorus, potassium, cadmium and zinc. Litter from free-range broilers showed the highest pH value (P=0.0005); however, the electrical conductivity was higher in the litter from both intensive and free-range layers compared to the litter from both broiler production systems (P=0.0117). Chicken litter from intensive systems had higher nitrogen content than litter from free-range systems (P=0.0000). The total phosphorus was the lowest in free-range broiler litter (P=0.0001), while the total potassium was the lowest in litter from intensively managed broilers (P=0.0000). Zinc appeared higher in litter from layers compared to that from broilers (P=0.0101). The cadmium content was higher in the litter from free-range broilers and layers compared to that in the litter from intensively managed systems (P=0.0439). Staphylococcus species in the litter as well as cadmium concentrations seem to be the most critical parameters presenting risks on the environment and on human health. Based on the lowest coliform counts (an indication of water pollution), the high nutrient levels and the low cadmium values, litter from intensively managed layers appears as the most suitable for application on agricultural soils.

Non-carious cervical lesions (NCCLs) in a random sampling community population and the association of NCCLs with occlusive wear.

PubMed

Yang, J; Cai, D; Wang, F; He, D; Ma, L; Jin, Y; Que, K

2016-12-01

This study investigated the prevalence, risk factors and association of occlusive wear with non-carious cervical lesions (NCCLs) in the general Chinese population. A total of 1320 subjects were recruited, and multistage and random sampling methods of survey spots were performed. All age groups comprised similar numbers of participants and equal numbers of males and females. Each subject completed a structured interview, and all teeth of each subject were examined by a practitioner to determine NCCLs and occlusive wear. Binary logistic regression was conducted by analysing the association of risk factors with the occurrence of NCCLs. Bivariate correlation analysis was performed by determining the association of NCCLs dimension or depth with the range of occlusive wear facets. Clinical assessment showed that the overall prevalence of subjects diagnosed with NCCLs was 63%. The proportion of subjects or teeth with NCCLs significantly increased with age. Pre-molars were the most commonly affected teeth. Single variables and interactive effects of variables associated with the occurrence of NCCLs include the following: age group, intensity of toothbrushing, frequency of fresh fruit consumption and interactive effect between intensity of toothbrushing and frequency of fresh fruit consumption. A weak positive correlation of the grading index was found between NCCLs dimension, size or depth and range of occlusive wear facets. This study reported the higher prevalence of NCCLs in the general Chinese population. Implementation of a combined strategy to reduce risk factors of NCCLs could be more effective than individual techniques; meanwhile, the occurrence of NCCL could be related to the wear degree of occlusive defects in the population studied. © 2016 John Wiley & Sons Ltd.

Risk factors for fecal carriage of carbapenemase producing Enterobacteriaceae among intensive care unit patients from a tertiary care center in India.

PubMed

Mittal, Gajanand; Gaind, Rajni; Kumar, Deepak; Kaushik, Gaurav; Gupta, Kunj Bihari; Verma, P K; Deb, Monorama

2016-07-08

Resistance amongst the commensal flora is a serious threat because a very highly populated ecosystem like the gut, may at a later stage, be a source of extra intestinal infections, resistant strains may spread to other host or transfer genetic resistance element to other members of micro-biota including pathogens. This study was carried out to assess fecal colonization by carbapenemase producing Enterobacteriaceae (CPE) and associated risk factors among 100 patients admitted to intensive care unit (ICU). The phenotypic and molecular characterizations of CPE were also included. Colonization with CPE was observed in 6.6 % (8/122) controls. Among ICU patients, fecal carriage of CPE was significantly higher on day 4 (D4) (22 %) as compared to day 1 (D1) (11 %) (p value 0.002). The carbapenemase genes detected included OXA- 48, 181, KPC and NDM-1 with NDM-1 being the predominant carbapenemase in both ICU D1 and D4. Among the 50 CPE isolates, 8 (16 %) were susceptible to meropenem and imipenem (Minimum inhibitory concentration; MIC ≤ 1 mg/L) and all were susceptible to colistin (MIC range 0.125 - 1 mg/L) and tigecycline (MIC range 0.06- 1.5 mg/L). The risk factors associated with CPE carriage were duration of ICU stay, use of ventilator and aminoglycosides. Prior colonization with CPE could result in their influx and spread in ICU, challenging infection control measures. Exposure to ICU further increases risk of colonization with diverse carbapenemase-producing Enterobacteriaceae. Gut colonization with these strains may be a source of endogenous infection and horizontal transfer of these genes in future.

Temporal lobe injury after re-irradiation of locally recurrent nasopharyngeal carcinoma using intensity modulated radiotherapy: clinical characteristics and prognostic factors.

PubMed

Liu, Shuai; Lu, Taixiang; Zhao, Chong; Shen, Jingxian; Tian, Yunming; Guan, Ying; Zeng, Lei; Xiao, Weiwei; Huang, Shaomin; Han, Fei

2014-09-01

Temporal lobe injury (TLI) is a debilitating complication after radiotherapy for nasopharyngeal carcinoma (NPC), especially in patients who suffer treatment relapses and receive re-irradiation. We explored the clinical characteristics and prognostic factors of TLI in locally recurrent NPC (rNPC) patients after re-irradiation using intensity modulated radiotherapy (IMRT). A total of 454 temporal lobes (TLs) from 227 locally rNPC patients were reviewed. The clinical characteristics of TLI were analyzed. In the two radiotherapy courses, the equivalent dose in 2 Gy per fraction (EQD2) for the TLs was recalculated to facilitate comparison of the individual data. The median follow-up time was 31 (range, 3-127) months. After re-irradiation using IMRT, 31.3 % (71/227) of patients developed TLI. The median latency of TLI was 15 (range, 4-100) months. Univariate and multivariate analysis showed that the interval time (IT) between the two courses of radiotherapy and the summation of the maximum doses of the two radiotherapy courses (EQD2 - ∑max) were independent factors influencing TLI. The 5-year incidence of TLI for an IT ≤26 or >26 months was 35.9 and 53.7 % respectively (p = 0.024). The median maximum doses delivered to the injured TLs were significantly higher than was the case for the uninjured TLs after two courses of radiotherapy (135.3 and 129.8 Gy, respectively: p < 0.001). The incidence of TLI with an EQD2 - ∑max < 125 Gy was <5 %, and with an EQD2 - ∑max <145 Gy it was <50 %. A treatment mode limiting EQD2 - ∑max <125 Gy with a >2-year interval was found to be relatively safe.

Burnout in the intensive care unit professionals: A systematic review.

PubMed

Chuang, Chien-Huai; Tseng, Pei-Chi; Lin, Chun-Yu; Lin, Kuan-Han; Chen, Yen-Yuan

2016-12-01

Burnout has been described as a prolonged response to chronic emotional and interpersonal stress on the job that is often the result of a period of expending excessive effort at work while having too little recovery time. Healthcare workers who work in a stressful medical environment, especially in an intensive care unit (ICU), may be particularly susceptible to burnout. In healthcare workers, burnout may affect their well-being and the quality of professional care they provide and can, therefore, be detrimental to patient safety. The objectives of this study were: to determine the prevalence of burnout in the ICU setting; and to identify factors associated with burnout in ICU professionals. The original articles for observational studies were retrieved from PubMed, MEDLINE, and Web of Science in June 2016 using the following MeSH terms: "burnout" and "intensive care unit". Articles that were published in English between January 1996 and June 2016 were eligible for inclusion. Two reviewers evaluated the abstracts identified using our search criteria prior to full text review. To be included in the final analysis, studies were required to have employed an observational study design and examined the associations between any risk factors and burnout in the ICU setting. Overall, 203 full text articles were identified in the electronic databases after the exclusion of duplicate articles. After the initial review, 25 studies fulfilled the inclusion criteria. The prevalence of burnout in ICU professionals in the included studies ranged from 6% to 47%. The following factors were reported to be associated with burnout: age, sex, marital status, personality traits, work experience in an ICU, work environment, workload and shift work, ethical issues, and end-of-life decision-making. The impact of the identified factors on burnout remains poorly understood. Nevertheless, this review presents important information, suggesting that ICU professionals may suffer from a high level of burnout, potentially threatening patient care. Future work should address the effective management of the factors negatively affecting ICU professionals.

Estimation of Rainfall Erosivity via 1-Minute to Hourly Rainfall Data from Taipei, Taiwan

NASA Astrophysics Data System (ADS)

Huang, Ting-Yin; Yang, Ssu-Yao; Jan, Chyan-Deng

2017-04-01

Soil erosion is a natural process on hillslopes that threats people's life and properties, having a considerable environmental and economic implications for soil degradation, agricultural activity and water quality. The rainfall erosivity factor (R-factor) in the Universal Soil Loss Equation (USLE), composed of total kinetic energy (E) and the maximum 30-min rainfall intensity (I30), is widely used as an indicator to measure the potential risks of soil loss caused by rainfall at a regional scale. This R factor can represent the detachment and entrainment involved in climate conditions on hillslopes, but lack of 30-min rainfall intensity data usually lead to apply this factor more difficult in many regions. In recent years, fixed-interval, hourly rainfall data is readily available and widely used due to the development of automatic weather stations. Here we assess the estimations of R, E, and I30 based on 1-, 5-, 10-, 15-, 30-, 60-minute rainfall data, and hourly rainfall data obtained from Taipei weather station during 2004 to 2010. Results show that there is a strong correlation among R-factors estimated from different interval rainfall data. Moreover, the shorter time-interval rainfall data (e.g., 1-min) yields larger value of R-factor. The conversion factors of rainfall erosivity (ratio of values estimated from the resolution lower than 30-min rainfall data to those estimated from 60-min and hourly rainfall data, respectively) range from 1.85 to 1.40 (resp. from 1.89 to 1.02) for 60-min (resp. hourly) rainfall data as the time resolution increasing from 30-min to 1-min. This paper provides useful information on estimating R-factor when hourly rainfall data is only available.

Lifetime prediction for the subsurface crack propagation using three-dimensional dynamic FEA model

NASA Astrophysics Data System (ADS)

Yin, Yuan; Chen, Yun-Xia; Liu, Le

2017-03-01

The subsurface crack propagation is one of the major interests for gear system research. The subsurface crack propagation lifetime is the number of cycles remaining for a spall to appear, which can be obtained through either stress intensity factor or accumulated plastic strain analysis. In this paper, the heavy loads are applied to the gear system. When choosing stress intensity factor, the high compressive stress suppresses Mode I stress intensities and severely reduces Mode II stress intensities in the heavily loaded lubricated contacts. Such that, the accumulated plastic strain is selected to calculate the subsurface crack propagation lifetime from the three-dimensional FEA model through ANSYS Workbench transient analysis. The three-dimensional gear FEA dynamic model with the subsurface crack is built through dividing the gears into several small elements. The calculation of the total cycles of the elements is proposed based on the time-varying accumulated plastic strain, which then will be used to calculate the subsurface crack propagation lifetime. During this process, the demonstration from a subsurface crack to a spall can be uncovered. In addition, different sizes of the elements around the subsurface crack are compared in this paper. The influences of the frictional coefficient and external torque on the crack propagation lifetime are also discussed. The results show that the lifetime of crack propagation decreases significantly when the external load T increasing from 100 N m to 150 N m. Given from the distributions of the accumulated plastic strain, the lifetime shares no significant difference when the frictional coefficient f ranging in 0.04-0.06.

Clinical Implications of the Tumor Volume Reduction Rate in Head-and-Neck Cancer During Definitive Intensity-Modulated Radiotherapy for Organ Preservation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yang, Shih-Neng; Department of Biomedical Imaging and Radiological Science, China Medical University, Taichung, Taiwan; Liao, Chih-Ying

2011-03-15

Purpose: To investigate the prognostic value of the volume reduction rate (VRR) in patients with head-and-neck cancer treated with intensity-modulated radiotherapy (IMRT). Methods and Materials: Seventy-six patients with oropharyngeal cancer (OPC) and another 76 with hypopharyngeal cancer (HPC) were enrolled in volumetric analysis. All patients received allocated radiotherapy courses. Adaptive computed tomography was done 4 to 5 weeks after the start of IMRT. Primary tumor volume measurement was derived using separate images for the pretreatment gross tumor volume (pGTV) and the interval gross tumor volume. Results: In the OPC group, the pGTV ranged from 6.6 to 242.6 mL (mean, 49.9more » mL), whereas the value of the VRR ranged from 0.014 to 0.74 (mean, 0.43). In HPC patients, the pGTV ranged from 4.1 to 152.4 mL (mean, 35.6 mL), whereas the VRR ranged from -1.15 to 0.79 (mean, 0.33). Multivariate analysis of the primary tumor relapse-free survival for OPC revealed three prognostic factors: T4 tumor (p = 0.0001, hazard ratio 7.38), pGTV {>=}20 mL (p = 0.01, hazard ratio 10.61), and VRR <0.5 (p = 0.001, hazard ratio 6.49). Multivariate analysis of the primary tumor relapse-free survival for HPC showed two prognostic factors: pGTV {>=}30 mL (p = 0.001, hazard ratio 2.87) and VRR <0.5 (p = 0.03, hazard ratio 2.25). Conclusion: The VRR is an outcome predictor for local control in OPC and HPC patients treated with IMRT. Those with large tumor volumes or a VRR <0.5 should be considered for a salvage operation or a dose-escalation scheme.« less

A Database for Compounding Stress Intensity Factors.

DTIC Science & Technology

1985-04-01

8217"’.’’" . ." ’" " " " "".. .... .... .... . .. .... . : ,.’. .. MICROCOP RE O UT O ," EST CHART...8217 - .. . , ., . . ,. . .,\\ .- . , , . -, . .- . . . , * TR 85046 o UNLIMITED __ ROYAL AIRCRAFT ESTABLISHMENT O Technical Report 85046 April 1985 A DATABASE FOR COMPOUNDING STRESS INTENSITY FACTORS L W by...DATABASE FOR COMPOUNDING STRESS INTENSITY FACTORS by A. M. Prior . ..- - . .. _ D. P. Rooke D. J. Cartwright* SUMMARY . The compounding method enables

Impact of Medicare Advantage penetration and hospital competition on technical efficiency of nursing care in US intensive care units.

PubMed

Min, Ari; Scott, Linda D; Park, Chang; Vincent, Catherine; Ryan, Catherine J; Lee, Taewha

2018-04-10

This study aimed to evaluate technical efficiency of US intensive care units and determine the effects of environmental factors on technical efficiency in providing quality of nursing care. Data were obtained from the 2014 National Database of Nursing Quality Indicators and the Centers for Medicare and Medicaid Services. Data envelopment analysis was used to estimate technical efficiency for each intensive care unit. Multilevel modeling was used to determine the effects of environmental factors on technical efficiency. Overall, Medicare Advantage penetration and hospital competition in a market did not create pressure for intensive care units to become more efficient by reducing their inputs. However, these 2 environmental factors showed positive influences on technical efficiency in intensive care units with certain levels of technical efficiency. The implications of the study results for management strategies and health policy may vary according to the levels of technical efficiency in intensive care units. Further studies are needed to examine why and how intensive care units with particular levels of technical efficiency are differently affected by certain environmental factors. Copyright © 2018 John Wiley & Sons, Ltd.

Effects of air-exposure gradients on spatial infection patterns of Perkinsus marinus in the eastern oyster Crassostrea virginica.

PubMed

Malek, Jennafer C; Breitburg, Denise L

2016-02-25

Spatial distributions of species can be shaped by factors such as parasites, mortality, and reproduction, all of which may be influenced by differences in physical factors along environmental gradients. In nearshore tidal waters, an elevational gradient in aerial exposure during low tide can shape the spatial distributions of benthic marine organisms. The eastern oyster Crassostrea virginica is an ecologically and economically important species that can dominate both subtidal and intertidal habitats along the east coast of the USA. Our goal was to determine whether prevalence and intensity of Perkinsus marinus (the causative agent of Dermo disease) infections vary along intertidal to subtidal gradients during summer. We used (1) field experiments conducted at 4 sites in the Chesapeake Bay and a Virginia coastal bay, (2) a controlled air-exposure experiment, and (3) field surveys from 7 sites ranging from Maine to North Carolina to test for effects of tidal exposure on infection. Results from our field surveys suggested that high intertidal oysters tend to have higher infection prevalence than subtidal oysters, but there was no effect on infection intensity. Field experiments rarely yielded significant effects of tidal exposure on infection prevalence and intensity. Overall, our study shows that exposure to air may not be a strong driver of infection patterns in this host-parasite system.

Community-based parenting and family support interventions and the prevention of drug abuse.

PubMed

Sanders, M R

2000-01-01

This paper presents a model for the development of a comprehensive, multilevel, preventively-oriented parenting and family support strategy to reduce family risk factors associated with drug abuse in young people. If parenting interventions are to make a significant impact at a population level on the prevalence of dysfunctional parenting practices, there is a need for an ecological approach to parenting support. Such an approach needs to target a variety of social contexts that are in a position to provide parents with access to evidence-based parenting interventions. The Triple P-Positive Parenting Program is discussed as an example of such an approach to illustrate the distinguishing features of a population level strategy. The core constructs underpinning the Triple P system include the promotion of parental self-regulation (self-sufficiency, self-efficacy, self-management, personal agency, and problem solving), through making parenting programs of adequate intensity widely available in the community through flexible delivery modalities (individual, group, telephone assisted and self-directed). The system comprises a tiered continuum of increasingly intensive parenting interventions ranging from media interventions with wide reach, to intensive behavioural family interventions with narrow reach for high-risk families where parenting problems are complicated by other factors including marital conflict, parental mood disturbance, and lack of social support. The scientific basis of the system of intervention and possible directions for future research is discussed.

Research on fatigue cracking growth parameters in asphaltic mixtures using computed tomography

NASA Astrophysics Data System (ADS)

Braz, D.; Lopes, R. T.; Motta, L. M. G.

2004-01-01

Distress of asphalt concrete pavement due to repeated bending from traffic loads has been a well-recognized problem in Brazil. If it is assumed that fatigue cracking growth is governed by the conditions at the crack tip, and that the crack tip conditions can be characterized by the stress intensity factor, then fatigue cracking growth as a function of stress intensity range Δ K can be determined. Computed tomography technique is used to detect crack evolution in asphaltic mixtures which were submitted to fatigue tests. Fatigue tests under conditions of controlled stress were carried out using diametral compression equipment and repeat loading. The aim of this work is imaging several specimens at different stages of the fatigue tests. In preliminary studies it was noted that the trajectory of a crack was influenced by the existence of voids in the originally unloaded specimens. Cracks would first be observed in the central region of a specimen, propagating in the direction of the extremities. Analyzing the graphics, that represent the fatigue cracking growth (d c/d N) as a function of stress intensity factor (Δ K), it is noticed that the curve has practically shown the same behavior for all specimens at the same level of the static tension rupture stress. The experimental values obtained for the constants A and n (of the Paris-Erdogan Law) present good agreement with the results obtained by Liang and Zhou.

The effects of aquaculture production noise on the growth, condition factor, feed conversion, and survival of rainbow trout, Oncorhynchus mykiss

USGS Publications Warehouse

Davidson, J.; Bebak, J.; Mazik, P.

2009-01-01

Intensive aquaculture systems, particularly recirculating systems, utilize equipment such as aerators, air and water pumps, blowers, and filtration systems that inadvertently increase noise levels in fish culture tanks. Sound levels and frequencies measured within intensive aquaculture systems are within the range of fish hearing, but species-specific effects of aquaculture production noise are not well defined. Field and laboratory studies have shown that fish behavior and physiology can be negatively impacted by intense sound. Therefore, chronic exposure to aquaculture production noise could cause increased stress, reduced growth rates and feed conversion efficiency, and decreased survival. The objective of this study was to provide an in-depth evaluation of the long term effects of aquaculture production noise on the growth, condition factor, feed conversion efficiency, and survival of cultured rainbow trout, Oncorhynchus mykiss. Rainbow trout were cultured in replicated tanks using two sound treatments: 117??dB re 1????Pa RMS which represented sound levels lower than those recorded in an intensive recycle system and 149??dB re 1????Pa RMS, representing sound levels near the upper limits known to occur in recycle systems. To begin the study mean fish weights in the 117 and 149??dB tanks were 40 and 39??g, respectively. After five months of exposure no significant differences were identified between treatments for mean weight, length, specific growth rates, condition factor, feed conversion, or survival (n = 4). Mean final weights for the 117 and 149??dB treatments were 641 ?? 3 and 631 ?? 10??g, respectively. Overall specific growth rates were equal, i.e. 1.84 ?? 0.00 and 1.84 ?? 0.01%/day. Analysis of growth rates of individually tagged rainbow trout indicated that fish from the 149??dB tanks grew slower during the first month of noise exposure (p < 0.05); however, fish acclimated to the noise thereafter. This study further suggests that rainbow trout growth and survival are unlikely to be affected over the long term by noise levels common to intensive aquaculture systems. ?? 2008 Elsevier B.V.

Maturation of the auditory system in clinically normal puppies as reflected by the brain stem auditory-evoked potential wave V latency-intensity curve and rarefaction-condensation differential potentials.

PubMed

Poncelet, L C; Coppens, A G; Meuris, S I; Deltenre, P F

2000-11-01

To evaluate auditory maturation in puppies. Ten clinically normal Beagle puppies. Puppies were examined repeatedly from days 11 to 36 after birth (8 measurements). Click-evoked brain stem auditory-evoked potentials (BAEP) were obtained in response to rarefaction and condensation click stimuli from 90 dB normal hearing level to wave V threshold, using steps of 10 dB. Responses were added, providing an equivalent to alternate polarity clicks, and subtracted, providing the rarefaction-condensation differential potential (RCDP). Steps of 5 dB were used to determine thresholds of RCDP and wave V. Slope of the low-intensity segment of the wave V latency-intensity curve was calculated. The intensity range at which RCDP could not be recorded (ie, pre-RCDP range) was calculated by subtracting the threshold of wave V from threshold of RCDP RESULTS: Slope of the wave V latency-intensity curve low-intensity segment evolved with age, changing from (mean +/- SD) -90.8 +/- 41.6 to -27.8 +/- 4.1 micros/dB. Similar results were obtained from days 23 through 36. The pre-RCDP range diminished as puppies became older, decreasing from 40.0 +/- 7.5 to 20.5 +/- 6.4 dB. Changes in slope of the latency-intensity curve with age suggest enlargement of the audible range of frequencies toward high frequencies up to the third week after birth. Decrease in the pre-RCDP range may indicate an increase of the audible range of frequencies toward low frequencies. Age-related reference values will assist clinicians in detecting hearing loss in puppies.

Landscape-scale dynamics of aspen in Rocky Mountain National Park, Colorado

Treesearch

Margot W. Kaye; Kuni Suzuki; Dan Binkley; Thomas J. Stohlgren

2001-01-01

Past studies of quaking aspen in Rocky Mountain National Park suggested that the aspen population is declining due to intensive browsing by elk (Cervus elaphus). These studies were conducted in the elk winter range, an area of intensive elk impact. The elk summer range experiences less intense grazing pressure. We tested the hypothesis that impacts of elk would be...

Effects of the Electron Beam Welding Process on the Microstructure, Tensile, Fatigue and Fracture Properties of Nickel Alloy Nimonic 80A

NASA Astrophysics Data System (ADS)

Zhang, H.; Huang, Chongxiang; Guan, Zhongwei; Li, Jiukai; Liu, Yongjie; Chen, Ronghua; Wang, Qingyuan

2018-01-01

The purpose of this study was to evaluate rotary bending high-cycle fatigue properties and crack growth of Nimonic 80A-based metal and electron beam-welded joints. All the tests were performed at room temperature. Fracture surfaces under high-cycle fatigue and fatigue crack growth were observed by scanning electron microscopy. Microstructure, hardness and tensile properties were also evaluated in order to understand the effects on the fatigue results obtained. It was found that the tensile properties, hardness and high-cycle fatigue properties of the welded joint are lower than the base metal. The fracture surface of the high-cycle fatigue shows that fatigue crack initiated from the surface under the high stress amplitude and from the subsurface under the low stress amplitude. The effect of the welding process on the statistical fatigue data was studied with a special focus on probabilistic life prediction and probabilistic lifetime limits. The fatigue crack growth rate versus stress intensity factor range data were obtained from the fatigue crack growth tests. From the results, it was evident that the fatigue crack growth rates of the welded are higher than the base metal. The mechanisms and fracture modes of fatigue crack growth of welded specimens were found to be related to the stress intensity factor range ΔK. In addition, the effective fatigue crack propagation thresholds and mismatch of welded joints were described and discussed.

Validity and Reliability of a New Instrument to Measure Cancer-Related Fatigue in Adolescents

PubMed Central

Hinds, Pamela S.; Hockenberry, Marilyn; Tong, Xin; Rai, Shesh N.; Gattuso, Jamie S.; McCarthy, Kathleen; Pui, Ching-Hon; Srivastava, Deo Kumar

2008-01-01

Adolescents undergoing treatment for cancer rate fatigue as their most prevalent and intense cancer- and treatment-related effect. Parents and staff rate it similarly. Despite its reported prevalence, intensity, and distressing effects, cancer-related fatigue in adolescents is not routinely assessed during or after cancer treatment. We contend that the insufficient clinical attention is primarily due to the lack of a reliable and valid self-report instrument with which adolescent cancer-related fatigue can be measured. Our aim was to determine the reliability and construct validity of a new instrument and its ability to measure change in fatigue over time. Initial testing involved 64 adolescents undergoing curative treatment of cancer who completed the Fatigue Scale-Adolescent (FS-A) at two to four key points in treatment in one of four studies. Internal consistency estimates ranged from 0.67 to 0.95. Validity estimates involving the FS-A with the parent version ranged from 0.13 to 0.76; estimates involving the staff version and the Reynolds Depression Scale were 0.27 and 0.87 respectively. Additional validity findings included significant fatigue differences between anemic and non-anemic patients (P = 0.042) and the emergence of four factors in an exploratory factor analysis. Findings further indicate that the FS-A can be used to measure change over time (t = 2.55, P <0.01). In summary, the FS-A has moderate to strong reliability and impressive validity coefficients for a new research instrument. PMID:17629669

High dynamic range algorithm based on HSI color space

NASA Astrophysics Data System (ADS)

Zhang, Jiancheng; Liu, Xiaohua; Dong, Liquan; Zhao, Yuejin; Liu, Ming

2014-10-01

This paper presents a High Dynamic Range algorithm based on HSI color space. To keep hue and saturation of original image and conform to human eye vision effect is the first problem, convert the input image data to HSI color space which include intensity dimensionality. To raise the speed of the algorithm is the second problem, use integral image figure out the average of every pixel intensity value under a certain scale, as local intensity component of the image, and figure out detail intensity component. To adjust the overall image intensity is the third problem, we can get an S type curve according to the original image information, adjust the local intensity component according to the S type curve. To enhance detail information is the fourth problem, adjust the detail intensity component according to the curve designed in advance. The weighted sum of local intensity component after adjusted and detail intensity component after adjusted is final intensity. Converting synthetic intensity and other two dimensionality to output color space can get final processed image.

Finite element techniques applied to cracks interacting with selected singularities

NASA Technical Reports Server (NTRS)

Conway, J. C.

1975-01-01

The finite-element method for computing the extensional stress-intensity factor for cracks approaching selected singularities of varied geometry is described. Stress-intensity factors are generated using both displacement and J-integral techniques, and numerical results are compared to those obtained experimentally in a photoelastic investigation. The selected singularities considered are a colinear crack, a circular penetration, and a notched circular penetration. Results indicate that singularities greatly influence the crack-tip stress-intensity factor as the crack approaches the singularity. In addition, the degree of influence can be regulated by varying the overall geometry of the singularity. Local changes in singularity geometry have little effect on the stress-intensity factor for the cases investigated.

The surface crack problem for a functionally graded coating bonded to a homogeneous layer

NASA Astrophysics Data System (ADS)

Kasmalkar, Maheendra B.

In the continuing search for materials which can withstand the grueling requirements of modern day applications, Functionally Graded Materials (FGMs) seem to be a promising alternative to conventional materials. These nonhomogeneous materials offer better interfacial properties by improving bond strength and reducing thermal mismatch. Before putting these materials into application, an important step in the design of FGMs is the stress analysis and fracture characterization. The fracture performance of FGM coatings on homogeneous substrates is the focus of this study. In this study, various internal and surface crack configurations in the coating and the substrate are subjected to mechanical and thermal loads. The analysis is linear elastic. The thermo-mechanical properties of the FGM coating are assumed to vary exponentially with the spatial coordinate. The equilibrium equations are solved using integral transforms. The resulting singular integral equations are solved using numerical integration. The results of interest for this mode I formulation are the stress intensity factors and the crack opening displacements. The effects of the nonhomogeneity parameter and various dimensionless length parameters are studied. One of the most important outcomes of this study is the theoretical proof that "kink" in material property at the interface does not introduce any singularity. In the numerical results it is observed that generally the stress intensity factors tend to increase with material nonhomogeneity. Also, it is observed that the substrate thickness tends to suppress cracking in the coating. In pure thermal loading, the surface cracks may either be arrested or there might be crack closure. The stress intensity factors from different loadings can be added up to obtain the resultant stress intensity factor for multiple loading. Results in this study have wide-ranging applications. They can be applied to thermal barrier coatings on turbine components, combustion chambers, parts of the airframe for the "Space Plane", soil mechanics, bone fractures and many more applications where the material is macroscopically nonhomogeneous. Thus this study solves a basic problem common to a variety of applications in diverse fields.

A Warning System for Rainfall-Induced Debris Flows: A Integrated Remote Sensing and Data Mining Approach

NASA Astrophysics Data System (ADS)

Elkadiri, R.; Sultan, M.; Nurmemet, I.; Al Harbi, H.; Youssef, A.; Elbayoumi, T.; Zabramwi, Y.; Alzahrani, S.; Bahamil, A.

2014-12-01

We developed methodologies that heavily rely on observations extracted from a wide-range of remote sensing data sets (TRMM, Landsat ETM, ENVISAT, ERS, SPOT, Orbview, GeoEye) to develop a warning system for rainfall-induced debris flows in the Jazan province in the Red Sea Hills. The developed warning system integrates static controlling factors and dynamic triggering factors. The algorithm couples a susceptibility map with a rainfall I-D curve, both are developed using readily available remote sensing datasets. The static susceptibility map was constructed as follows: (1) an inventory was compiled for debris flows identified from high spatial resolution datasets and field verified; (2) 10 topographical and land cover predisposing factors (i.e. slope angle, slope aspect, normalized difference vegetation index, topographical position index, stream power index, flow accumulation, distance to drainage line, soil weathering index, elevation and topographic wetness index) were generated; (3) an artificial neural network model (ANN) was constructed, optimized and validated; (4) a debris-flow susceptibility map was generated using the ANN model and refined (using differential backscatter coefficient radar images). The rainfall threshold curve was derived as follows: (1) a spatial database was generated to host temporal co-registered and radiometrically and atmospherically corrected Landsat images; (2) temporal change detection images were generated for pairs of successively acquired Landsat images and criteria were established to identify "the change" related to debris flows, (3) the duration and intensity of the precipitation event that caused each of the identified debris flow events was assumed to be that of the most intense event within the investigated period; and (4) the I-D curve was extracted using data (intensity and duration of precipitation) for the inventoried events. Our findings include: (1) the spatial controlling factors with the highest predictive power of debris-flow locations are: topographic position index, slope, NDVI and distance to drainage line; (2) the ANN model showed an excellent prediction performance (area under receiver operating characteristic [ROC] curve: 0.961); 3) the preliminary I-D curve is I=39.797×D-0.7355 (I: Intensity and D: duration).

Plasma Properties and Magnetic Field Structure of the Solar Corona, Based on Coordinated Max '91 Observations from SERTS, the VLA, and Magnetographs

NASA Technical Reports Server (NTRS)

Brosius, Jeffrey W. (Principal Investigator)

1996-01-01

The plasma properties and magnetic field structure of the solar corona were determined using coordinated observations obtained with NASA/GSFC's Solar EUV Rocket Telescope and Spectrograph (SERTS), the Very Large Array (VLA), and Kitt Peak photospheric longitudinal magnetograms. A problem was identified with the SERTS calibration as determined from laboratory measurements. A revised calibration curve was derived by requiring that the numerous available measured line intensity ratios agreed with their respective theoretical values. Densities were derived from line intensity ratios, and active region densities were found to typically exceed quiet Sun densities by factors of only about 2. The active region density was found to remain constant across the SERTS slit, despite the fact that the emission line intensities vary significantly. This indicates that the product of the path length and the volume filling factor must vary significantly from the active region outskirts to the central core. Filling factors were derived and found to range from much less than one to nearly unity. Wavelength shifts were examined along the SERTS slit in the spatially resolved spectra, but no evidence was found for significant Doppler shifts in active region 7563 or in the quiet Sun. The numerical procedure developed by Monsignori-Fossi and Landini was used to derive the active region and quiet sun differential emission measure (DEM) from the spatially averaged spectra. A DEM was estimated for each spatial pixel in the two dimensional active region images by scaling the averaged active region DEM based upon corresponding pixel intensities of SERTS Mg IX, Fe XV, and Fe XVI images. These results, along with density measurements, were used in an IDL computer code which calculated the temperature dependence of the coronal magnetic field in each spatial pixel by minimizing the difference between the observed and calculated 20 and 6 cm microwave brightness temperatures.

Bleeding events and associated factors in a cohort of adult patients taking warfarin in Sarawak, Malaysia.

PubMed

Edwards, Frances; Arkell, Paul; Fong; Roberts, Lesley M; Gendy, David; Wong, Christina Siew-Hie; Ngu, Joanna Chee Yien; Tiong, Lee Len; Bibi, Faridha Mohd Salleh; Lai, Lana Yin Hui; Ong, Tiong Kiam; Abouyannis, Michael

2014-01-01

Evidence is emerging that rates of adverse events in patients taking warfarin may vary with ethnicity. This study investigated the rates of bleeds and thromboembolic events, the international normalised ratio (INR) status and the relationship between INR and bleeding events in Malaysia. Patients attending INR clinic at the Heart Centre, Sarawak General Hospital were enrolled on an ad hoc basis from May 2010 and followed up for 1 year. At each routine visit, INR was recorded and screening for bleeding or thromboembolism occurred. Variables relating to INR control were used as predictors of bleeds in logistic regression models. 125 patients contributed to 140 person-years of follow-up. The rates of major bleed, thromboembolic event and minor bleed per 100 person-years of follow-up were 1.4, 0.75 and 34.3. The median time at target range calculated using the Rosendaal method was 61.6% (IQR 44.6–74.1%). Of the out-of-range readings, 30.0% were below range and 15.4% were above. INR variability, (standard deviation of individuals’ mean INR), was the best predictor of bleeding events, with an odds ratio of 3.21 (95% CI 1.10–9.38). Low rates of both major bleeds and thromboembolic events were recorded, in addition to a substantial number of INR readings under the recommended target range. This may suggest that the recommended INR ranges may not represent the optimal warfarin intensity for this population and that a lower intensity of therapy, as observed in this cohort, could be beneficial in preventing adverse events.

Posttraumatic stress disorder in children and their parents following admission to the pediatric intensive care unit: a review.

PubMed

Nelson, Lara P; Gold, Jeffrey I

2012-05-01

To evaluate posttraumatic stress disorder in children who have been admitted to the pediatric intensive care unit and their families. Studies were identified through PubMed, MEDLINE, and Ovid. All descriptive, observational, and controlled studies with a focus on posttraumatic stress disorder and the pediatric intensive care unit were included. Posttraumatic stress disorder rates in children following admission to the pediatric intensive care unit were between 5% and 28%, while rates of posttraumatic stress disorder symptoms were significantly higher, 35% to 62%. There have been inconsistencies noted across risk factors. Objective and subjective measurements of disease severity were intermittently positively associated with development of posttraumatic stress disorder. There was a positive relationship identified between the child's symptoms of posttraumatic stress disorder and their parents' symptoms.The biological mechanisms associated with the development of posttraumatic stress disorder in children admitted to the pediatric intensive care unit have yet to be explored. Studies in children following burn or other unintentional injury demonstrate potential relationships between adrenergic hormone levels and a diagnosis of posttraumatic stress disorder. Likewise genetic studies suggest the importance of the adrenergic system in this pathway.The rates of posttraumatic stress disorder in parents following their child's admission to the pediatric intensive care unit ranged between 10.5% and 21%, with symptom rates approaching 84%. It has been suggested that mothers are at increased risk for the development of posttraumatic stress disorder compared to fathers. Objective and subjective measures of disease severity yielded mixed findings with regard to the development of posttraumatic stress disorder. Protective parental factors may include education or the opportunity to discuss the parents' feelings during the admission. Following admission to the pediatric intensive care unit, both children and their parents have high rates of trauma exposure, both personally and secondary exposure via other children and their families, and subsequently are reporting significant rates of posttraumatic stress disorder. To effectively treat our patients, we must recognize the signs of posttraumatic stress disorder and strive to mitigate the negative effects.

Impact of high-intensity concurrent training on cardiovascular risk factors in persons with multiple sclerosis - pilot study.

PubMed

Keytsman, Charly; Hansen, Dominique; Wens, Inez; O Eijnde, Bert

2017-10-27

High-intensity concurrent training positively affects cardiovascular risk factors. Because this was never investigated in multiple sclerosis, the present pilot study explored the impact of this training on cardiovascular risk factors in this population. Before and after 12 weeks of high-intense concurrent training (interval and strength training, 5 sessions per 2 weeks, n = 16) body composition, resting blood pressure and heart rate, 2-h oral glucose tolerance (insulin sensitivity, glycosylated hemoglobin, blood glucose and insulin concentrations), blood lipids (high- and low-density lipoprotein, total cholesterol, triglyceride levels) and C-reactive protein were analyzed. Twelve weeks of high-intense concurrent training significantly improved resting heart rate (-6%), 2-h blood glucose concentrations (-13%) and insulin sensitivity (-24%). Blood pressure, body composition, blood lipids and C-reactive protein did not seem to be affected. Under the conditions of this pilot study, 12 weeks of concurrent high-intense interval and strength training improved resting heart rate, 2-h glucose and insulin sensitivity in multiple sclerosis but did not affect blood C-reactive protein levels, blood pressure, body composition and blood lipid profiles. Further, larger and controlled research investigating the effects of high-intense concurrent training on cardiovascular risk factors in multiple sclerosis is warranted. Implications for rehabilitation High-intensity concurrent training improves cardiovascular fitness. This pilot study explores the impact of this training on cardiovascular risk factors in multiple sclerosis. Despite the lack of a control group, high-intense concurrent training does not seem to improve cardiovascular risk factors in multiple sclerosis.

Optimum Material Composition for Minimizing the Stress Intensity Factor of Edge Crack in Thick-Walled FGM Circular Pipes Under Thermomechanical Loading

NASA Astrophysics Data System (ADS)

Sekine, Hideki; Yoshida, Kimiaki

This paper deals with the optimization problem of material composition for minimizing the stress intensity factor of radial edge crack in thick-walled functionally graded material (FGM) circular pipes under steady-state thermomechanical loading. Homogenizing the FGM circular pipes by simulating the inhomogeneity of thermal conductivity by a distribution of equivalent eigentemperature gradient and the inhomogeneity of Young's modulus and Poisson's ratio by a distribution of equivalent eigenstrain, we present an approximation method to obtain the stress intensity factor of radial edge crack in the FGM circular pipes. The optimum material composition for minimizing the stress intensity factor of radial edge crack is determined using a nonlinear mathematical programming method. Numerical results obtained for a thick-walled TiC/Al2O3 FGM circular pipe reveal that it is possible to decrease remarkably the stress intensity factor of radial edge crack by setting the optimum material composition profile.

Strain intensity factor approach for predicting the strength of continuously reinforced metal matrix composites

NASA Technical Reports Server (NTRS)

Poe, Clarence C., Jr.

1989-01-01

A method was previously developed to predict the fracture toughness (stress intensity factor at failure) of composites in terms of the elastic constants and the tensile failing strain of the fibers. The method was applied to boron/aluminum composites made with various proportions of 0 deg and +/- 45 deg plies. Predicted values of fracture toughness were in gross error because widespread yielding of the aluminum matrix made the compliance very nonlinear. An alternate method was develolped to predict the strain intensity factor at failure rather than the stress intensity factor because the singular strain field was not affected by yielding as much as the stress field. Far-field strains at failure were calculated from the strain intensity factor, and then strengths were calculated from the far-field strains using uniaxial stress-strain curves. The predicted strengths were in good agreement with experimental values, even for the very nonlinear laminates that contained only +/- 45 deg plies. This approach should be valid for other metal matrix composites that have continuous fibers.

Empirical test of the spectral invariants theory using imaging spectroscopy data from a coniferous forest

NASA Astrophysics Data System (ADS)

Lukeš, Petr; Rautiainen, Miina; Stenberg, Pauline; Malenovský, Zbyněk

2011-08-01

The spectral invariants theory presents an alternative approach for modeling canopy scattering in remote sensing applications. The theory is particularly appealing in the case of coniferous forests, which typically display grouped structures and require computationally intensive calculation to account for the geometric arrangement of their canopies. However, the validity of the spectral invariants theory should be tested with empirical data sets from different vegetation types. In this paper, we evaluate a method to retrieve two canopy spectral invariants, the recollision probability and the escape factor, for a coniferous forest using imaging spectroscopy data from multiangular CHRIS PROBA and NADIR-view AISA Eagle sensors. Our results indicated that in coniferous canopies the spectral invariants theory performs well in the near infrared spectral range. In the visible range, on the other hand, the spectral invariants theory may not be useful. Secondly, our study suggested that retrieval of the escape factor could be used as a new method to describe the BRDF of a canopy.

The Darwin cure for apiculture? Natural selection and managed honeybee health.

PubMed

Neumann, Peter; Blacquière, Tjeerd

2017-03-01

Recent major losses of managed honeybee, Apis mellifera, colonies at a global scale have resulted in a multitude of research efforts to identify the underlying mechanisms. Numerous factors acting singly and/or in combination have been identified, ranging from pathogens, over nutrition to pesticides. However, the role of apiculture in limiting natural selection has largely been ignored. This is unfortunate, because honeybees are more exposed to environmental stressors compared to other livestock and management can severely compromise bee health. Here, we briefly review apicultural factors that influence bee health and focus on those most likely interfering with natural selection, which offers a broad range of evolutionary applications for field practice. Despite intense breeding over centuries, natural selection appears to be much more relevant for the health of managed A. mellifera colonies than previously thought. We conclude that sustainable solutions for the apicultural sector can only be achieved by taking advantage of natural selection and not by attempting to limit it.

Determination of Cerium (IV) Using Rhodamine 6G Fluorescence Quenching

NASA Astrophysics Data System (ADS)

Zhao, Zh.; Sheng, L.; Su, B.; Tao, C.; Jing, W.

2017-11-01

The interaction between rhodamine 6G (Rh6G) and cerium sulfate was studied by the fluorescence quenching method. In a sulfuric acid medium, the interaction of Ce(IV) with Rh6G results in Rh6G fluorescence quenching. The maximum excitation wavelength (λex) and the maximum emission wavelength (λem) are 530 nm and 555 nm, respectively. A good linearity between the relative fl uorescence intensity (ΔF) and Ce(IV) was observed in the range 0.12-1.08 μg/mL. The detection limit was 1.4 × 10-3 μg/mL. The optimum reaction conditions, influencing factors, and effect of coexisting substances were investigated in the experiment. We found that the concentration of Rh6G was 3.2 × 10-6 mol/L, and the fl uorescence intensity was maximum.

Debris flow study in Malaysia

NASA Astrophysics Data System (ADS)

Bahrin Jaafar, Kamal

2016-04-01

The phenomenon of debris flow occurs in Malaysia occasionally. The topography of Peningsular Malysia is characterized by the central mountain ranges running from south to north. Several parts of hilly areas with steep slopes, combined with high saturation of soil strata that deliberately increase the pore water pressure underneath the hill slope. As a tropical country Malaysia has very high intensity rainfall which is triggered the landslide. In the study area where the debris flow are bound to occur, there are a few factors that contribute to this phenomenon such as high rainfall intensity, very steep slope which an inclination more than 35 degree and sandy clay soil type which is easily change to liquidity soil. This paper will discuss the study of rainfall, mechanism, modeling and design of mitigation measure to avoid repeated failure in future in same area.

[The role of some psychological, psychosocial and obstetrical factors in the intensity of postpartum blues].

PubMed

Séjourné, N; Denis, A; Theux, G; Chabrol, H

2008-04-01

Within days following birth, most women show signs of mood changes, commonly named baby blues. Baby blues can result in postpartum depression. Hence it appears important to explore in more details the clinical background related to the intensity of postpartum blues. The aim of this study is to investigate the contribution of psychological, psychosocial and obstetrical factors to the intensity of postpartum blues. One hundred and forty-eight women participated in the study and completed questionnaires three days after delivery. A questionnaire was built to collect information on psychosocial and obstetrical factors. The Maternity Blues (Kennerley and Gath, 1989) was used to assess postpartum blues. Psychological factors were measured with the Maternal Self-Report Inventory (Shea et Tronick, 1988), the Perceived Stress Scale (Cohen, Kamarch et Mermelstein, 1983) and the Sarason's Social Support Questionnaire (1983). Four multiple regression analyses were conducted to predict the intensity of postpartum blues by entering psychosocial factors, history of depression, obstetrical factors and psychological and relational factors. Significant predictors (maternal self-esteem, marital status, previous psychotherapeutic treatment, previous antidepressant treatment) were entered in a multiple regression analysis predicting the intensity of postpartum blues. This model accounted for 31% of the variance in the intensity of postpartum blues (F(4, 143)=17.9; P<0.001). Maternal self-esteem (beta=-0.37; P<0.001), marital situation (beta=-0.16; P=0.02) were significant predictors. Previous antidepressant treatment (beta=0.13; P=0.05) was almost a significant predictor. The preventive implication of this study is important. Some psychological and psychosocial variables predicted the intensity of postpartum blues and may be used in order to detect women who exhibit risk factors.

Water Detection Based on Color Variation

NASA Technical Reports Server (NTRS)

Rankin, Arturo L.

2012-01-01

This software has been designed to detect water bodies that are out in the open on cross-country terrain at close range (out to 30 meters), using imagery acquired from a stereo pair of color cameras mounted on a terrestrial, unmanned ground vehicle (UGV). This detector exploits the fact that the color variation across water bodies is generally larger and more uniform than that of other naturally occurring types of terrain, such as soil and vegetation. Non-traversable water bodies, such as large puddles, ponds, and lakes, are detected based on color variation, image intensity variance, image intensity gradient, size, and shape. At ranges beyond 20 meters, water bodies out in the open can be indirectly detected by detecting reflections of the sky below the horizon in color imagery. But at closer range, the color coming out of a water body dominates sky reflections, and the water cue from sky reflections is of marginal use. Since there may be times during UGV autonomous navigation when a water body does not come into a perception system s field of view until it is at close range, the ability to detect water bodies at close range is critical. Factors that influence the perceived color of a water body at close range are the amount and type of sediment in the water, the water s depth, and the angle of incidence to the water body. Developing a single model of the mixture ratio of light reflected off the water surface (to the camera) to light coming out of the water body (to the camera) for all water bodies would be fairly difficult. Instead, this software detects close water bodies based on local terrain features and the natural, uniform change in color that occurs across the surface from the leading edge to the trailing edge.

The Radiological Physics Center's standard dataset for small field size output factors.

PubMed

Followill, David S; Kry, Stephen F; Qin, Lihong; Lowenstein, Jessica; Molineu, Andrea; Alvarez, Paola; Aguirre, Jose Francisco; Ibbott, Geoffrey S

2012-08-08

Delivery of accurate intensity-modulated radiation therapy (IMRT) or stereotactic radiotherapy depends on a multitude of steps in the treatment delivery process. These steps range from imaging of the patient to dose calculation to machine delivery of the treatment plan. Within the treatment planning system's (TPS) dose calculation algorithm, various unique small field dosimetry parameters are essential, such as multileaf collimator modeling and field size dependence of the output. One of the largest challenges in this process is determining accurate small field size output factors. The Radiological Physics Center (RPC), as part of its mission to ensure that institutions deliver comparable and consistent radiation doses to their patients, conducts on-site dosimetry review visits to institutions. As a part of the on-site audit, the RPC measures the small field size output factors as might be used in IMRT treatments, and compares the resulting field size dependent output factors to values calculated by the institution's treatment planning system (TPS). The RPC has gathered multiple small field size output factor datasets for X-ray energies ranging from 6 to 18 MV from Varian, Siemens and Elekta linear accelerators. These datasets were measured at 10 cm depth and ranged from 10 × 10 cm(2) to 2 × 2 cm(2). The field sizes were defined by the MLC and for the Varian machines the secondary jaws were maintained at a 10 × 10 cm(2). The RPC measurements were made with a micro-ion chamber whose volume was small enough to gather a full ionization reading even for the 2 × 2 cm(2) field size. The RPC-measured output factors are tabulated and are reproducible with standard deviations (SD) ranging from 0.1% to 1.5%, while the institutions' calculated values had a much larger SD range, ranging up to 7.9% [corrected].The absolute average percent differences were greater for the 2 × 2 cm(2) than for the other field sizes. The RPC's measured small field output factors provide institutions with a standard dataset against which to compare their TPS calculated values. Any discrepancies noted between the standard dataset and calculated values should be investigated with careful measurements and with attention to the specific beam model.

Risk Factors for Hearing Loss in Patients Treated With Intensity-Modulated Radiotherapy for Head-and-Neck Tumors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zuur, Charlotte L.; Simis, Yvonne J.; Lamers, Emmy A.

2009-06-01

Purpose: Radiotherapy (RT) is a common treatment of head-and-neck carcinoma. The objective of this study was to perform a prospective multivariate assessment of the dose-effect relationship between intensity-modulated RT and hearing loss. Methods and Materials: Pure tone audiometry at 0.250-16 kHz was obtained before and after treatment in 101 patients (202 ears). All patients received full-course intensity-modulated RT (range, 56-70 Gy), with a median cochlear dose of 11.4 Gy (range, 0.2-69.7). Results: Audiometry was performed 1 week before and a median of 9 weeks (range, 1-112) after treatment. The mean hearing deterioration at pure tone average air-conduction 1-2-4 kHz wasmore » small (from 28.6 dB HL to 30.1 dB HL). However, individual patients showed clinically significant hearing loss, with 10-dB threshold shift incidences of 13% and 18% at pure tone averages air-conduction 1-2-4 kHz and 8-10-12.5 kHz, respectively. Post-treatment hearing capability was unfavorable in the case of greater inner ear radiation doses (p <0.0001), unfavorable baseline hearing capability (p <0.0001), green-eyed patients (p <0.0001), and older age (p <0.0001). Using multivariate analysis, a prediction of individual hearing capabiltity after treatment was made. Conclusion: RT-induced hearing loss in the mean population is modest. However, clinically significant hearing loss was observed in older patients with green eyes and unfavorable pretreatment hearing. In these patients, the intended radiation dose may be adjusted according to the proposed predictive model, aiming to decrease the risk of ototoxicity.« less

Retrospective cohort study shows that the risks for retinopathy of prematurity included birth age and weight, medical conditions and treatment.

PubMed

Ali, Aliaa A; Gomaa, Nancy A S; Awadein, Ahmed R; Al-Hayouti, Huda H; Hegazy, Ahmed I

2017-12-01

This study described the characteristics and risk factors of neonates who developed retinopathy of prematurity (ROP) and severe treatable ROP in two Egyptian neonatal intensive care units (NICUs). This retrospective cohort study comprised 108 preterm neonates who were screened for ROP after being admitted to the two NICUs run by Cairo University Hospital from June 2014 to May 2015. Patients were examined using digital fundus photography and indirect ophthalmoscopy was performed if ROP was detected. Retinopathy of prematurity occurred in 75 patients. Late-onset sepsis, ventilation and hypercapnia were independently associated with ROP. Patients who developed severe treatable ROP had a younger gestational age (GA) than patients who did not develop ROP or developed mild or moderate ROP (29 weeks, range 27-33 weeks versus 32 weeks, range 28-36 weeks, p = 0.002) and a lower birthweight (1200 g, range 980-1590 g versus 1460 g, range 770-2475 g, p = 0.029). The risk factors associated with severe treatable ROP included the duration of admission, the duration of incubator oxygen, late-onset sepsis, intraventricular haemorrhage, total parenteral nutrition and the duration of caffeine citrate therapy. This study showed that the risks for ROP were wide-ranging and included GA and weight, medical conditions and treatment. ©2017 Foundation Acta Paediatrica. Published by John Wiley & Sons Ltd.

[Selectivity and tolerance of sea urchin (Hemicentrotus pulcherrimus) to environmental change].

PubMed

You, Kai; Zeng, Xiaoqi; Liu, Hui; Zhang, Xiumei; Liu, Qun

2003-03-01

An experimental ecological study of sea urchin (Hemicentrotus pulcherrimus) sampled from coastal waters of Qingdao was focused on the fundamental ecological factors such as temperature, salinity, light intensity and substratum. The results showed that the suitable ecological range of temperature was from 8 degrees C to 22 degrees C, and the selectivity to temperature was changed with the previous living temperatures. Hemicentrotus pulcherrimus was a kind of stenohaline creature. Its optimum ecological range of salinity was from 30 to 35. The results also showed that Hemicentrotus pulcherrimus liked to select weak light environment (< 50 lux), especially under non-food condition. Hemicentrotus pulcherrimus had the positive substratum-selectivity to coarse sand and the negative substratum-selectivity to silver sand.

Digital micromirror device camera with per-pixel coded exposure for high dynamic range imaging.

PubMed

Feng, Wei; Zhang, Fumin; Wang, Weijing; Xing, Wei; Qu, Xinghua

2017-05-01

In this paper, we overcome the limited dynamic range of the conventional digital camera, and propose a method of realizing high dynamic range imaging (HDRI) from a novel programmable imaging system called a digital micromirror device (DMD) camera. The unique feature of the proposed new method is that the spatial and temporal information of incident light in our DMD camera can be flexibly modulated, and it enables the camera pixels always to have reasonable exposure intensity by DMD pixel-level modulation. More importantly, it allows different light intensity control algorithms used in our programmable imaging system to achieve HDRI. We implement the optical system prototype, analyze the theory of per-pixel coded exposure for HDRI, and put forward an adaptive light intensity control algorithm to effectively modulate the different light intensity to recover high dynamic range images. Via experiments, we demonstrate the effectiveness of our method and implement the HDRI on different objects.

[Analysis of occupational burnout and its influencing factors of colliery migrant workers in Guizhou Province].

PubMed

Zhao, Xiaodeng; Tuo, Anxie; Peng, Anhui; He, Wanjing; Zhu, Peijia; Yan, Zheng

2015-11-01

To understand the status of occupational burnout of colliery migrant workers and its influencing factors. The occupational burnout of 1161 colliery migrant workers in Jinsha County, Guizhou Province was measured with MBI-GS and the self-made questionnaire. All dimensions of MBI-GS Cronbach's α coefficient was in the range of 0.86-0.88, all 15 items of MBI-GS were subjected to factor analysis, and three latent factors were identified, which explained 68.86% of the total variance and consisted with the theory model. The score of occupational burnout of each dimension, differences in different individual characteristics (physical examination, sleep, et al) were statistically significant (P <0.05). The influence factors of occupational burnout of colliery migrant workers were physical examination, chronic disease, smoking, physical exercise, sleep, initial work in coal mine, production post and labor intensity. MBI-GS can be used to study the occupational burnout of colliery migrant workers. Different individual characteristics effect the occurrence of occupational burnout.

Survey of Collision Avoidance and Ranging Sensors for Mobile Robots.

DTIC Science & Technology

1988-03-01

systems represent a potential safety problem in that the intense and often invisible beam can be an eye hazard. Furthermore, gas lasers require high ...sensor, or out of range. Conventional diffuse proximity detectors based on return signal intensity display high repeatability only when target...because the low transmission intensity of this infrared wavelength results in minimal return radiation. (The extremely cold detector produces a high

Phonetogram changes for trained singers over a nine-month period of vocal training.

PubMed

LeBorgne, Wendy DeLeo; Weinrich, Barbara D

2002-03-01

Professional vocalists encounter demands requiring voluntary control of phonation, while utilizing a considerable range of frequency and intensity. These quantifiable acoustic events can be measured and represented in a phonetogram. Previous research has compared the phonetograms of trained and untrained voices and found significant differences between these groups. This study was designed to assess the effects of vocal training for singers over a period of nine months. Phonetogram contour changes were examined, with the primary focus on expansion of frequency range and/or intensity control. Twenty-one first-year, master's level, vocal music students, who were engaged in an intensive vocal performance curriculum, participated in this study. Following nine months of vocal training, significant differences were revealed in the subjects' mean frequency range and minimum vocal intensity across frequency levels. There was no significant difference for the mean maximum vocal intensity across frequency levels following vocal training.

Target Plate Material Influence on Fullerene-C60 Laser Desorption/Ionization Efficiency.

PubMed

Zeegers, Guido P; Günthardt, Barbara F; Zenobi, Renato

2016-04-01

Systematic laser desorption/ionization (LDI) experiments of fullerene-C60 on a wide range of target plate materials were conducted to gain insight into the initial ion formation in matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. The positive and negative ion signal intensities of precursor, fragment, and cluster ions were monitored, varying both the laser fluence (0-3.53 Jcm(-2)) and the ion extraction delay time (0-950 ns). The resulting species-specific ion signal intensities are an indication for the ionization mechanisms that contribute to LDI and the time frames in which they operate, providing insight in the (MA)LDI primary ionization. An increasing electrical resistivity of the target plate material increases the fullerene-C60 precursor and fragment anion signal intensity. Inconel 625 and Ti90/Al6/V4, both highly electrically resistive, provide the highest anion signal intensities, exceeding the cation signal intensity by a factor ~1.4 for the latter. We present a mechanism based on transient electrical field strength reduction to explain this trend. Fullerene-C60 cluster anion formation is negligible, which could be due to the high extraction potential. Cluster cations, however, are readily formed, although for high laser fluences, the preferred channel is formation of precursor and fragment cations. Ion signal intensity depends greatly on the choice of substrate material, and careful substrate selection could, therefore, allow for more sensitive (MA)LDI measurements. Graphical Abstract ᅟ.

The effect of intensive glucose lowering therapy among major racial/ethnic groups in the Veterans Affairs Diabetes Trial

PubMed Central

Saremi, Aramesh; Schwenke, Dawn C.; Bahn, Gideon; Ge, Ling; Emanuele, Nicholas; Reaven, Peter D.

2014-01-01

Objective To examine the effect of intensive glycemic control on cardiovascular disease events (CVD) among the major race/ethnic groups in a post-hoc analysis of the VADT. Materials and Methods Participants included 1111 non-Hispanic Whites, 307 Hispanics and 306 non-Hispanic Blacks randomized to intensive or standard glucose treatment in VADT. Multivariable Cox proportional hazards models were constructed to assess the effect of intensive glucose treatment on CVD events among race/ethnic groups. Results Mean age was 60.4 years and median follow-up was 5.6 years. By design, modifiable risk factors were managed equally well in both treatment arms and only differed modestly between race/ethnic groups. HbA1c decreased significantly from baseline with intensive glucose treatment in each race/ethnic group, with a trend for a greater response in Hispanics (P=0.02 for overall comparison between groups). Intensive glucose treatment was associated with reduced risk of CVD events for Hispanics but not for others (hazard ratios ranged from 0.54 to 0.75 for Hispanics whereas they were consistently close to 1 for others). Sensitivity analyses with different definitions of race/ethnicity or limited to individuals free of previous known CVD yielded similar results. Conclusions The results of these analyses support the hypothesis that race/ethnicity is worthy of consideration when tailoring intensive treatment for individuals with long-standing type 2 diabetes. However, additional studies are needed to confirm the findings of this post-hoc analysis. PMID:25456099

Convection index as a tool for trend analysis of intense summer storms in Switzerland

NASA Astrophysics Data System (ADS)

Gaal, Ladislav; Molnar, Peter; Szolgay, Jan

2013-04-01

Convective summer thunderstorms are generally responsible for the most devastating floods in urban and small natural catchments. In this study we focus on the identification of the nature and magnitude of changes in the properties of intense summer storms of convective character in Switzerland in the last three decades. The study is based on precipitation records from the SwissMetNet (MeteoSwiss) network at 63 stations that cover altitudes ranging from 200 up to 3300 m a.s.l. over the period 1981-2012 (32 years). Additionally, the same stations also measure the number of lightning strikes within a range of 30 km from each station. In an accompanying contribution we describe the method how intensive summer storms can be reliably selected out of all storms in long and high resolution precipitation time series. On the basis of the statistical distributions and dependence among key storm characteristics at the event scale (total rainfall depth R, storm duration D, and peak intensity I) and using high resolution lightning data as a surrogate we defined a threshold intensity I* that differentiates between the events accompanied with lightning with an acceptably small probability of misclassification. This allowed us to identify intense summer events with convective character as those where I > I* regardless of their duration or total rainfall depth. The current study makes use of the threshold intensity I* for the definition of a seasonal convection index at each station (Llasat, 2001). This index gives us a measure of 'convectiveness', i.e. the total precipitation depth coming from convective storms relative to the total precipitation depth of all summer storms. We computed the convection index at all 63 stations and analyzed the series for trends. We found that the seasonal convection index increases at most of the stations in Switzerland and in approximately 20% of the cases this increase is statistically significant. This is likely a consequence of the fact that the number of summer storms exceeding the threshold I* also shows an increasing tendency with a similar percentage of statistically significant changes. Although our analysis indicates an increasing tendency in the intensity and frequency of summer storms with convective character in Switzerland, it is not yet clear whether these can be traced to causal factors such as atmospheric warming, etc. This remains an open research question.

Simulations of large acoustic scintillations in the straits of Florida.

PubMed

Tang, Xin; Tappert, F D; Creamer, Dennis B

2006-12-01

Using a full-wave acoustic model, Monte Carlo numerical studies of intensity fluctuations in a realistic shallow water environment that simulates the Straits of Florida, including internal wave fluctuations and bottom roughness, have been performed. Results show that the sound intensity at distant receivers scintillates dramatically. The acoustic scintillation index SI increases rapidly with propagation range and is significantly greater than unity at ranges beyond about 10 km. This result supports a theoretical prediction by one of the authors. Statistical analyses show that the distribution of intensity of the random wave field saturates to the expected Rayleigh distribution with SI= 1 at short range due to multipath interference effects, and then SI continues to increase to large values. This effect, which is denoted supersaturation, is universal at long ranges in waveguides having lossy boundaries (where there is differential mode attenuation). The intensity distribution approaches a log-normal distribution to an excellent approximation; it may not be a universal distribution and comparison is also made to a K distribution. The long tails of the log-normal distribution cause "acoustic intermittency" in which very high, but rare, intensities occur.

Managing interior Northwest rangelands: the Oregon Range Evaluation Project.

Treesearch

Thomas M. Quigley; H. Reed Sanderson; Arthur R. Tiedemann

1989-01-01

This report is a synthesis of results from an 11-year study of the effects of increasing intensities of range management strategies on herbage production, water resources, economics, and associated resources-such as wood fiber and recreation-in Grant County, Oregon. Four intensities of management were studied on Federal land (19 grazing allotments) ranging from no...

Cumulative IT Use Is Associated with Psychosocial Stress Factors and Musculoskeletal Symptoms.

PubMed

So, Billy C L; Cheng, Andy S K; Szeto, Grace P Y

2017-12-08

This study aimed to examine the relationship between cumulative use of electronic devices and musculoskeletal symptoms. Smartphones and tablet computers are very popular and people may own or operate several devices at the same time. High prevalence rates of musculoskeletal symptoms associated with intensive computer use have been reported. However, research focusing on mobile devices is only just emerging in recent years. In this study, 285 persons participated including 140 males and 145 females (age range 18-50). The survey consisted of self-reported estimation of daily information technology (IT) exposure hours, tasks performed, psychosocial stress factors and relationship to musculoskeletal discomfort in the past 12 months. Total IT exposure time was an average of 7.38 h (±5.2) per day. The psychosocial factor of "working through pain" showed the most significant association with odds ratio (OR) ranging from 1.078 (95% CI = 1.021-1.138) for elbow discomfort, to 1.111 (95% CI = 1.046-1.180) for shoulder discomfort. Desktop time was also significantly associated with wrist/hand discomfort (OR = 1.103). These findings indicate only a modest relationship but one that is statistically significant with accounting for confounders. It is anticipated that prevalence rates of musculoskeletal disorders would rise in the future with increasing contribution due to psychosocial stress factors.

Emission Patterns of Solar Type III Radio Bursts: Stereoscopic Observations

NASA Technical Reports Server (NTRS)

Thejappa, G.; MacDowall, R.; Bergamo, M.

2012-01-01

Simultaneous observations of solar type III radio bursts obtained by the STEREO A, B, and WIND spacecraft at low frequencies from different vantage points in the ecliptic plane are used to determine their directivity. The heliolongitudes of the sources of these bursts, estimated at different frequencies by assuming that they are located on the Parker spiral magnetic field lines emerging from the associated active regions into the spherically symmetric solar atmosphere, and the heliolongitudes of the spacecraft are used to estimate the viewing angle, which is the angle between the direction of the magnetic field at the source and the line connecting the source to the spacecraft. The normalized peak intensities at each spacecraft Rj = Ij /[Sigma]Ij (the subscript j corresponds to the spacecraft STEREO A, B, and WIND), which are defined as the directivity factors are determined using the time profiles of the type III bursts. It is shown that the distribution of the viewing angles divides the type III bursts into: (1) bursts emitting into a very narrow cone centered around the tangent to the magnetic field with angular width of approximately 2 deg and (2) bursts emitting into a wider cone with angular width spanning from [approx] -100 deg to approximately 100 deg. The plots of the directivity factors versus the viewing angles of the sources from all three spacecraft indicate that the type III emissions are very intense along the tangent to the spiral magnetic field lines at the source, and steadily fall as the viewing angles increase to higher values. The comparison of these emission patterns with the computed distributions of the ray trajectories indicate that the intense bursts visible in a narrow range of angles around the magnetic field directions probably are emitted in the fundamental mode, whereas the relatively weaker bursts visible to a wide range of angles are probably emitted in the harmonic mode.

Low Intensity Low Temperature (LILT) Measurements and Coefficients on New Photovoltaic Structures

NASA Technical Reports Server (NTRS)

Scheiman, David A.; Jenkins, Phillip P.; Brinker, David J.; Appelbaum, Joseph

1995-01-01

Past NASA missions to Mars, Jupiter and the outer planets were powered by radioisotope thermal generators (RTGs). Although these devices proved to be reliable, their high cost and highly toxic radioactive heat source has made them far less desirable for future planetary missions. This has resulted in a renewed search for alternate energy sources, some of them being photovoltaics (PV) and thermophotovoltaics (TPV). Both of these alternate energy sources convert light/thermal energy directly into electricity. In order to create a viable PV data base for planetary mission planners and cell designers, we have compiled low intensity low temperature (LILT) I-V data on single junction and multi-junction high efficiency solar cells. The cells tested here represent the latest photovoltaic technology. Using this LILT data to calculate Short Circuit Current (I(sub sc)), Open Circuit Voltage (V(sub os)), and Fill Factor (FF) as a function of temperature and intensity, an accurate prediction of cell performance under the AM0 spectrum can be determined. When combined with QUantum efficiency at Low Temperature (QULT) data, one can further enhance the data by adding spectral variations to the measurements. This paper presents an overview of LILT measurements and is only intended to be used as a guideline for material selection and performance predictions. As single junction and multi-junction cell technologies emerge, new test data must be collected. Cell materials included are Si, GaAs/Ge, GaInP/GaAs/GaAs, InP, InGaAs/InP, InP/InGaAs/InP, and GaInP. Temperatures range down to as low as -180 C and intensities range from 1 sun down to 0.02 suns. The coefficients presented in this paper represent experimental results and are intended to provide the user with approximate numbers.

Numerical study on the impact of ground heating and ambient wind speed on flow fields in street canyons

NASA Astrophysics Data System (ADS)

Li, Lei; Yang, Lin; Zhang, Li-Jie; Jiang, Yin

2012-11-01

The impact of ground heating on flow fields in street canyons under different ambient wind speed conditions was studied based on numerical methods. A series of numerical tests were performed, and three factors including height-to-width (H/W) ratio, ambient wind speed and ground heating intensity were taken into account. Three types of street canyon with H/W ratios of 0.5, 1.0 and 2.0, respectively, were used in the simulation and seven speed values ranging from 0.0 to 3.0 m s-1 were set for the ambient wind speed. The ground heating intensity, which was defined as the difference between the ground temperature and air temperature, ranged from 10 to 40 K with an increase of 10 K in the tests. The results showed that under calm conditions, ground heating could induce circulation with a wind speed of around 1.0 m s-1, which is enough to disperse pollutants in a street canyon. It was also found that an ambient wind speed threshold may exist for street canyons with a fixed H/W ratio. When ambient wind speed was lower than the threshold identified in this study, the impact of the thermal effect on the flow field was obvious, and there existed a multi-vortex flow pattern in the street canyon. When the ambient wind speed was higher than the threshold, the circulation pattern was basically determined by dynamic effects. The tests on the impact of heating intensity showed that a higher ground heating intensity could strengthen the vortical flow within the street canyon, which would help improve pollutant diffusion capability in street canyons.

Effects of vocal training on singing and speaking voice characteristics in vocally healthy adults and children based on choral and nonchoral data.

PubMed

Siupsinskiene, Nora; Lycke, Hugo

2011-07-01

This prospective cross-sectional study examines the effects of voice training on vocal capabilities in vocally healthy age and gender differentiated groups measured by voice range profile (VRP) and speech range profile (SRP). Frequency and intensity measurements of the VRP and SRP using standard singing and speaking voice protocols were derived from 161 trained choir singers (21 males, 59 females, and 81 prepubescent children) and from 188 nonsingers (38 males, 89 females, and 61 children). When compared with nonsingers, both genders of trained adult and child singers exhibited increased mean pitch range, highest frequency, and VRP area in high frequencies (P<0.05). Female singers and child singers also showed significantly increased mean maximum voice intensity, intensity range, and total VRP area. The logistic regression analysis showed that VRP pitch range, highest frequency, maximum voice intensity, and maximum-minimum intensity range, and SRP slope of speaking curve were the key predictors of voice training. Age, gender, and voice training differentiated norms of VRP and SRP parameters are presented. Significant positive effect of voice training on vocal capabilities, mostly singing voice, was confirmed. The presented norms for trained singers, with key parameters differentiated by gender and age, are suggested for clinical practice of otolaryngologists and speech-language pathologists. Copyright © 2011 The Voice Foundation. Published by Mosby, Inc. All rights reserved.

Quantifying the Impact of Technological Trends and Spatiotemporal Variability in Hydraulic Fracturing Water Intensity

NASA Astrophysics Data System (ADS)

Montgomery, J.; O'sullivan, F.

2016-12-01

An important metric for comparing the environmental impact of hydraulically fractured oil and gas wells to other energy technologies is the water intensity, or water usage normalized to energy production. Due to varying hydraulic fracturing practices, immense variability in short-term well performance, and uncertainty about lifetime production from wells, the water intensity of wells is difficult to predict and should be modeled statistically using field data. We analyzed public production and hydraulic fracturing data for 3497 wells drilled in the North Dakota Williston Basin between 2012 and 2015 to identify technology and sweet-spotting trends and identify their impact on well productivity and water intensity. We found that the water used per well increased by an average of 43% per year over this period while the water intensity of wells increased by 32% per year. The difference in these rates was due to a trend of increasing production rates, which we found to be associated equally with changes in technology and sweet-spotting. The prevalent role of sweet spotting means that as future drilling activity shifts into less productive areas than are presently being exploited, this will predictably increase the water intensity of new wells. Although some of the variability in well productivity and water intensity is resolvable to the influence of spatial heterogeneity and technology practices, a substantial amount of uncertainty is irreducible due to unobservable factors. This uncertainty can best be represented and updated with new information, such as initial rates of production, using a Bayesian decline curve model. We demonstrate how this approach can be used to forecast uncertainty of water intensity at different locations and points in time, making it a useful tool for a range of stakeholders, including regulatory agencies assessing the environmental impact of drilling activity within particular watersheds.

Influence of atmospheric turbulence on the quantum polarization state

NASA Astrophysics Data System (ADS)

Yang, Ru; Xue, Yang; Li, Yunxia; Shi, Lei; Zhu, Yu; Zhu, Qiuli

2018-03-01

In order to study the influence of atmospheric turbulence on the polarization state of the free space quantum communication, the relationship between the refractive index and altitude, the refractive index structure constant and the turbulence dimension is deduced based on two different atmospheric refractive index structural constants models. The turbulence intensity factor κ is introduced and the equation of the variation of the quantum polarization degree with turbulence intensity is established. Through the simulation of the turbulent refractive index and the performance of four different polarization states in the low altitude turbulence environment, the results show that the atmospheric turbulence in the near ground will affect the fluctuation of the degree of polarization, and the degree of polarization varies linearly with the change of turbulence intensity. In the case of polarization |H>, the range of polarization |H> varies from 0 to 0.14 with the change of turbulence intensity. The influence of atmospheric turbulence on four different polarization states is different, and the degree of |H> and |V> depolarization is greater in the daytime and back. The depolarization degree of |-> at night is greater. The relationship between the degree of polarization and the change of turbulence intensity is analyzed by mathematical modeling, which is helpful to select the reasonable experimental scheme and compensate the change of polarization state in the aviation quantum Secure communication channel.

Radiation control in the intensive care unit for high intensity iridium-192 brain implants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sewchand, W.; Drzymala, R.E.; Amin, P.P.

A bedside lead cubicle was designed to minimize the radiation exposure of intensive care unit staff during routine interstitial brain irradiation by removable, high intensity iridium-192. The cubicle shields the patient without restricting intensive care routines. The design specifications were confirmed by exposure measurements around the shield with an implanted anthropomorphic phantom simulating the patient situation. The cubicle reduces the exposure rate around an implant patient by as much as 90%, with the exposure level not exceeding 0.1 mR/hour/mg of radium-equivalent /sup 192/Ir. Evaluation of data accumulated for the past 3 years has shown that the exposure levels of individualmore » attending nurses are 0.12 to 0.36 mR/mg of radium-equivalent /sup 192/Ir per 12-hour shift. The corresponding range for entire nursing teams varies between 0.18 and 0.26. A radiation control index (exposure per mg of radium-equivalent /sup 192/Ir per nurse-hour) is thus defined for individual nurses and nursing teams; this index is a significant guide to the planning of nurse rotations for brain implant patients with various /sup 192/Ir loads. The bedside shield reduces exposure from /sup 192/Ir implants by a factor of about 20, as expected, and the exposure from the lower energy radioisotope iodine-125 is barely detectable.« less

Temporally increasing spatial synchrony of North American temperature and bird populations

NASA Astrophysics Data System (ADS)

Koenig, Walter D.; Liebhold, Andrew M.

2016-06-01

The ecological impacts of modern global climate change are detectable in a wide variety of phenomena, ranging from shifts in species ranges to changes in community composition and human disease dynamics. So far, however, little attention has been given to temporal changes in spatial synchrony--the coincident change in abundance or value across the landscape--despite the importance of environmental synchrony as a driver of population trends and the central role of environmental variability in population rescue and extinction. Here we demonstrate that across North America, spatial synchrony of a significant proportion of 49 widespread North American wintering bird species has increased over the past 50 years--the period encompassing particularly intense anthropogenic effects in climate--paralleling significant increases in spatial synchrony of mean maximum air temperature. These results suggest the potential for increased spatial synchrony in environmental factors to be affecting a wide range of ecological phenomena. These effects are likely to vary, but for North American wildlife species, increased spatial synchrony driven by environmental factors may be the basis for a previously unrecognized threat to their long-term persistence in the form of more synchronized population dynamics reducing the potential for demographic rescue among interacting subpopulations.

Study of chemical shift in Kα, Kβ1,3 and Kβ// X-ray emission lines of 37Rb compounds with WDXRF

NASA Astrophysics Data System (ADS)

Kainth, Harpreet Singh; Singh, Ranjit; Singh, Tejbir; Mehta, D.; Shahi, J. S.; Kumar, Sanjeev

2018-05-01

The positive and negative chemical shifts in Kα, Kβ1,3 and Kβ// X-ray emission lines of rubidium compounds were measured with high resolution WDXRF spectrometer. The measured energy shifts in Kα emission lines ranges from -2.95 eV to -3.64 eV, Kβ1,3 emission lines ranges from 1.16 eV to 1.32 eV and Kβ// emission lines ranges from 1.31 eV to 4.36 eV respectively. In the present work, it has been found that chemical shift in Kβ// X-ray emission lines were found to be larger than Kα and Kβ1,3 X-ray emission lines. To find the cause of chemical shift, various factors like effective charge, line intensity ratio, bond length and electro-negativity were calculated and correlated with the chemical shift.

Climate change and health modeling: horses for courses.

PubMed

Ebi, Kristie L; Rocklöv, Joacim

2014-01-01

Mathematical and statistical models are needed to understand the extent to which weather, climate variability, and climate change are affecting current and may affect future health burdens in the context of other risk factors and a range of possible development pathways, and the temporal and spatial patterns of any changes. Such understanding is needed to guide the design and the implementation of adaptation and mitigation measures. Because each model projection captures only a narrow range of possible futures, and because models serve different purposes, multiple models are needed for each health outcome ('horses for courses'). Multiple modeling results can be used to bracket the ranges of when, where, and with what intensity negative health consequences could arise. This commentary explores some climate change and health modeling issues, particularly modeling exposure-response relationships, developing early warning systems, projecting health risks over coming decades, and modeling to inform decision-making. Research needs are also suggested.

Study of the lithology, petrology and rock chemistry for the Pyramid Mountains, New Mexico

NASA Technical Reports Server (NTRS)

Grant, S. K.

1985-01-01

Rock and soil samples were collected at 24 sites within the Pyramid Mountains of southwestern New Mexico. The site locations are specified as 10-acre plots within the Section, Township, and Range land survey system. Hand specimen are described. The specimen were analyzed by X-ray fluorescence. The technique is designed to obtain good analysis for silica. The other elements are run so that matrix factor logic can be used to adjust the silica intensities, and to compensate for the element interaction.

Whispering gallery modes in two-photon fluorescence from spherical DCM dye microresonators

NASA Astrophysics Data System (ADS)

Mamonov, Evgeniy A.; Maydykovskiy, Anton I.; Mitetelo, Nikolai V.; Venkatakrishnarao, Dasari; Chandrasekar, Rajadurai; Murzina, Tatyana V.

2018-03-01

Organic microstructures are well known for their resonator properties, which bring about whispering gallery mode (WGM) excitation. Here we report on experimental evidence of the WGM in the two-photon fluorescence (TPF) of DCM dye microspheres made using the self-assembly method. The WGM excitation accompanying the overall TPF in the spectral range from 530\\div640 nm demonstrated a quality factor of approximately 102 for spheres that were several microns in diameter. The power dependence of the TPF intensity proved the second order nature of the interaction process involved.

Senate and INF ratification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, D.T.

1992-11-16

The Intermediate-Range Nuclear Forces (INF) Treaty represented one of the first major accomplishments of the post-cold war era. In contrast to all arms control agreements which preceded it, INF resulted in the elimination of a whole category of weapons systems. The author describes and analyzes many issues which impinged on the Senate ratification process and stimulated intense political debate. In addition to national and international security questions, these issues involved constitutional, political, jurisdictional, and bureaucratic factors. The author concludes with lessons and recommendations for more expeditious ratification for future agreements.

1D silicon refractive lenses for surface scattering with high energy x-rays

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bertram, F.; Gutowski, O.; Schroer, C.

2016-07-27

At the high energy X-ray beamline P07 at PETRA III, 1D focusing down to 4 micrometer vertical beam height while preserving a horizontal beam width of 0.5 mm was established by refractive lenses etched into a silicon wafer. A single wafer with 8 different lens structures can cover the full energy range between 50 and 120 keV. For surface diffraction on ultrathin films a factor of 4 in intensity can be achieved compared to the already established Al-compound refractive 2D-lenses.

Effects of intensity and frequency of harvesting on abundance, stocking and composition of natural regeneration in the Acadian Forest of eastern North America

Treesearch

John C. Brissette

1996-01-01

In a silviculture experiment in east-central Maine, USA, natural regeneration was sampled to measure the effects of: (1) a range of partial harvest intensities, and (2) repeated partial harvest at one intensity. Under the first objective, five treatments were compared with residual basal areas ranging from 15 to 24 m2 ha-1...

Absolute laser-intensity measurement and online monitor calibration using a calorimeter at a soft X-ray free-electron laser beamline in SACLA

NASA Astrophysics Data System (ADS)

Tanaka, Takahiro; Kato, Masahiro; Saito, Norio; Owada, Shigeki; Tono, Kensuke; Yabashi, Makina; Ishikawa, Tetsuya

2018-06-01

This paper reports measurement of the absolute intensity of free-electron laser (FEL) and calibration of online intensity monitors for a brand-new FEL beamline BL1 at SPring-8 Angstrom Compact free-electron LAser (SACLA) in Japan. To measure the absolute intensity of FEL, we used a room-temperature calorimeter originally developed for FELs in the hard X-ray range. By using the calorimeter, we calibrated online intensity monitors of BL1, gas monitors (GMs), based on the photoionization of argon gas, in the photon energy range from 25 eV to 150 eV. A good correlation between signals obtained from the calorimeter and GMs was observed in the pulse energy range from 1 μJ to 100 μJ, where the upper limit is nearly equal to the maximum pulse energy at BL1. Moreover, the calibration result of the GMs, measured in terms of the spectral responsivity, demonstrates a characteristic photon-energy dependence owing to the occurrence of the Cooper minimum in the total ionization cross-section of argon gas. These results validate the feasibility of employing the room-temperature calorimeter in the measurement of absolute intensity of FELs over the specified photon energy range.

[Vocal capabilities of nonprofessional singers evaluated by measurement and superimposition of their speaking, shouting and singing voice range profiles].

PubMed

Hacki, T

1999-09-01

Voice range profile(VRP) measurement (Phonetography) was used for the evaluation of the vocal capabilities of 41 female (F) and 50 male (M) members of a nonprofessional choir. By means of an automatic VPR measurement system F0 and SPL dB(A) were determined and displayed real time, two-dimensionally. The speaking voice (reading a standard passage as well as counting from the softest to the loudest intensity), the shouting voice (3-4 times shouting a standard sentence) and the singing voice (sustained phonation / la:/ at minimum and maximum intensity level) were measured. The VRPs of these voice modalities were superimposed on the screen and the plot. The averaged values for the speaking VRP: intensity range (F): 48 dB (range 46 soft to 94 dB loud phonation), (M): 52 dB (range 46-98). Pitch range (F): 15 semitones (ST) (Cis3, 138-E4, 329 Hz), (M): 19 ST (E2, 82 Hz-H3, 246 Hz). The average slope for the speaking voice (F): 0,31 ST/dB, (M): 0,36 ST/dB. Shouting VRP highest intensity (F): 106,5 dB, (M): 108,5 dB, highest pitch (F): between Ais4, 466 and H4, 493 Hz. (M): E4, 329 Hz. Average slope for speaking and shouting voice (F): 0,36 ST/dB, (M): 0,39 ST/dB. Singing VRP pitch range (F): 34,6 ST, (M): 37 ST, intensity range (F): 60 dB, (M): 58 dB. The pitch extension of the speaking VRP ranges from 2,9 to 46,2%, speaking and shouting VRPs together with 2,9 to 65% of the pitch range of the singing VRP (F), (M) 2,7-54% and 2,7-67,5% accordingly. The average values for nonprofessional singers reflect an effective but not special use of the phonatory system for the speaking, shouting and singing voice functions with respect to pitch and intensity.

Kinetic inductance detectors for far-infrared spectroscopy

NASA Astrophysics Data System (ADS)

Barlis, Alyssa; Aguirre, James; Stevenson, Thomas

2016-07-01

The star formation mechanisms at work in the early universe remain one of the major unsolved problems of modern astrophysics. Many of the luminous galaxies present during the period of peak star formation (between redshifts 1 and 3) were heavily enshrouded in dust, which makes observing their properties difficult at optical wavelengths. However, many spectral lines exist at far-infrared wavelengths that serve as tracers of star formation during that period, in particular fine structure lines of nitrogen, carbon, and oxygen, as well as the carbon monoxide molecule. Using an observation technique known as intensity mapping, it would be possible to observe the total line intensity for a given redshift range even without detecting individual sources. Here, we describe a detector system suitable for a balloonborne spectroscopic intensity mapping experiment at far-infrared wavelengths. The experiment requires an "integralfield" type spectrograph, with modest spectral resolution (R 100) for each of a number of spatial pixels spanning several octaves in wavelength. The detector system uses lumped-element kinetic inductance detectors (LEKIDs), which have the potential to achieve the high sensitivity, low noise, and high multiplexing factor required for this experiment. We detail the design requirements and considerations, and the fabrication process for a prototype LEKID array of 1600 pixels. The pixel design is driven by the need for high responsivity, which requires a small physical volume for the LEKID inductor. In order to minimize two-level system noise, the resonators include large-area interdigitated capacitors. High quality factor resonances are required for a large frequency multiplexing factor. Detectors were fabricated using both trilayer TiN/Ti/TiN recipes and thin-film Al, and are operated at base temperatures near 250 mK.

Validation of the Persian Version of the Brief Pain Inventory (BPI-P) in Chronic Pain Patients.

PubMed

Majedi, Hossein; Dehghani, S Sharareh; Soleyman-Jahi, Saeed; Emami Meibodi, S Ali; Mireskandari, S Mohammad; Hajiaghababaei, Marzieh; Tafakhori, Abbas; Mendoza, Tito R; Cleeland, Charles S

2017-07-01

Chronic pain needs to be evaluated with a standard instrument. The Brief Pain Inventory (BPI) is a pain assessment tool that has been validated in many languages. The aim of the present study was to develop the Persian version of the Brief Pain Inventory (BPI-P) and also to evaluate the psychometric properties of the BPI-P in the Iranian population. The BPI-P was translated from the original version of BPI using standard procedure. The Persian version of the BPI and 12-item Short-Form Health Survey (SF-12) were completed by 201 patients with chronic pain who were referred to a tertiary pain care clinic from 2013 to 2015. The performance status of the patients was evaluated by physicians using Eastern Cooperative Oncology Group performance test. Factor analysis of the BPI-P identified two scales: pain intensity and pain interference with life. These two factors explained 68.4% of the variance. Coefficient alpha values for BPI-P items ranging from 0.87 to 0.91 showed good internal consistency of the factors. The high intraclass correlation coefficients for the items of the questionnaire confirmed the test-retest reliability for the BPI-P. Patients with higher scores in Eastern Cooperative Oncology Group performance test reported higher levels of pain intensity and pain interference with life. Pain intensity in BPI-P correlated with physical functioning, bodily pain, mental health, and vitality of the SF-12 questionnaire, whereas pain interference was associated with general health, bodily pain, mental health, vitality, and social functioning. The present study demonstrated that the Persian version of the BPI could be a valid and reliable instrument for pain assessment in Persian-speaking patients. Copyright © 2017 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

Predictors of exercise capacity following exercise-based rehabilitation in patients with coronary heart disease and heart failure: A meta-regression analysis.

PubMed

Uddin, Jamal; Zwisler, Ann-Dorthe; Lewinter, Christian; Moniruzzaman, Mohammad; Lund, Ken; Tang, Lars H; Taylor, Rod S

2016-05-01

The aim of this study was to undertake a comprehensive assessment of the patient, intervention and trial-level factors that may predict exercise capacity following exercise-based rehabilitation in patients with coronary heart disease and heart failure. Meta-analysis and meta-regression analysis. Randomized controlled trials of exercise-based rehabilitation were identified from three published systematic reviews. Exercise capacity was pooled across trials using random effects meta-analysis, and meta-regression used to examine the association between exercise capacity and a range of patient (e.g. age), intervention (e.g. exercise frequency) and trial (e.g. risk of bias) factors. 55 trials (61 exercise-control comparisons, 7553 patients) were included. Following exercise-based rehabilitation compared to control, overall exercise capacity was on average 0.95 (95% CI: 0.76-1.41) standard deviation units higher, and in trials reporting maximum oxygen uptake (VO2max) was 3.3 ml/kg.min(-1) (95% CI: 2.6-4.0) higher. There was evidence of a high level of statistical heterogeneity across trials (I(2) statistic > 50%). In multivariable meta-regression analysis, only exercise intervention intensity was found to be significantly associated with VO2max (P = 0.04); those trials with the highest average exercise intensity had the largest mean post-rehabilitation VO2max compared to control. We found considerable heterogeneity across randomized controlled trials in the magnitude of improvement in exercise capacity following exercise-based rehabilitation compared to control among patients with coronary heart disease or heart failure. Whilst higher exercise intensities were associated with a greater level of post-rehabilitation exercise capacity, there was no strong evidence to support other intervention, patient or trial factors to be predictive. © The European Society of Cardiology 2015.

[Study on the arc spectral information for welding quality diagnosis].

PubMed

Li, Zhi-Yong; Gu, Xiao-Yan; Li, Huan; Yang, Li-Jun

2009-03-01

Through collecting the spectral signals of TIG and MIG welding arc with spectrometer, the arc light radiations were analyzed based on the basic theory of plasma physics. The radiation of welding arc distributes over a broad range of frequency, from infrared to ultraviolet. The arc spectrum is composed of line spectra and continuous spectra. Due to the variation of metal density in the welding arc, there is great difference between the welding arc spectra of TIG and MIG in both their intensity and distribution. The MIG welding arc provides more line spectra of metal and the intensity of radiation is greater than TIG. The arc spectrum of TIG welding is stable during the welding process, disturbance factors that cause the spectral variations can be reflected by the spectral line related to the corresponding element entering the welding arc. The arc spectrum of MIG welding will fluctuate severely due to droplet transfer, which produces "noise" in the line spectrum aggregation zone. So for MIG welding, the spectral zone lacking spectral line is suitable for welding quality diagnosis. According to the characteristic of TIG and MIG, special spectral zones were selected for welding quality diagnosis. For TIG welding, the selected zone is in ultraviolet zone (230-300 nm). For MIG welding, the selected zone is in visible zone (570-590 nm). With the basic theory provided for welding quality diagnosis, the integral intensity of spectral signal in the selected zone of welding process with disturbing factor was studied to prove the theory. The results show that the welding quality and disturbance factors can be diagnosed with good signal to noise ratio in the selected spectral zone compared with signal in other spectral zone. The spectral signal can be used for real-time diagnosis of the welding quality.

A CNN Regression Approach for Real-Time 2D/3D Registration.

PubMed

Shun Miao; Wang, Z Jane; Rui Liao

2016-05-01

In this paper, we present a Convolutional Neural Network (CNN) regression approach to address the two major limitations of existing intensity-based 2-D/3-D registration technology: 1) slow computation and 2) small capture range. Different from optimization-based methods, which iteratively optimize the transformation parameters over a scalar-valued metric function representing the quality of the registration, the proposed method exploits the information embedded in the appearances of the digitally reconstructed radiograph and X-ray images, and employs CNN regressors to directly estimate the transformation parameters. An automatic feature extraction step is introduced to calculate 3-D pose-indexed features that are sensitive to the variables to be regressed while robust to other factors. The CNN regressors are then trained for local zones and applied in a hierarchical manner to break down the complex regression task into multiple simpler sub-tasks that can be learned separately. Weight sharing is furthermore employed in the CNN regression model to reduce the memory footprint. The proposed approach has been quantitatively evaluated on 3 potential clinical applications, demonstrating its significant advantage in providing highly accurate real-time 2-D/3-D registration with a significantly enlarged capture range when compared to intensity-based methods.

An exonuclease I-based label-free fluorometric aptasensor for adenosine triphosphate (ATP) detection with a wide concentration range.

PubMed

Wei, Yanli; Chen, Yanxia; Li, Huanhuan; Shuang, Shaomin; Dong, Chuan; Wang, Gufeng

2015-01-15

A novel aptamer-based label-free assay for sensitive and selective detection of ATP was developed. This assay employs a new aptamer/fluorescent probe system that shows resistance to exonuclease I (Exo I) digestion upon binding to ATP molecules. In the absence of ATP, the complex between the ATP-binding aptamer (ATP-aptamer) and a DNA binding dye, berberine, is digested upon the addition of exonuclease I, leading to the release of berberine into solution and consequently, quenched berberine fluorescence. In the presence of ATP, the ATP-binding aptamer folds into a G-quadruplex structure that is resistant to Exo I digestion. Accordingly, berberine is protected in the G-quadruplex structure and high fluorescence intensity is observed. As such, based on the fluorescence signal change, a label-free fluorescence assay for ATP was developed. Factors affecting the analysis of ATP including the concentration of ATP-binding aptamer, reaction time, temperature and the concentration of Exo I were comprehensively investigated. Under optimal conditions, the fluorescence intensity of the sensing system displayed a response for ATP in a wide range up to 17.5 mM with a detection limit of 140 nM.

Simplex optimization of the variables influencing the determination of pefloxacin by time-resolved chemiluminescence

NASA Astrophysics Data System (ADS)

Murillo Pulgarín, José A.; Alañón Molina, Aurelia; Jiménez García, Elisa

2018-03-01

A new chemiluminescence (CL) detection system combined with flow injection analysis (FIA) for the determination of Pefloxacin is proposed. The determination is based on an energy transfer from Pefloxacin to terbium (III). The metal ion enhances the weak CL signal produced by the KMnO4/H2SO3/Pefloxacin system. A modified simplex method was used to optimize chemical and instrumental variables. The influence of the interaction of the permanganate, Tb (III), sodium sulphite and sulphuric acid concentrations, flow rate and injected sample volume was thoroughly investigated by using a modified simplex optimization procedure. The results revealed a strong direct relationship between flow rate and CL intensity throughout the studied range that was confirmed by a gamma test. The response factor for the CL emission intensity was used to assess performance in order to identify the optimum conditions for maximization of the response. Under such conditions, the CL response was proportional to the Pefloxacin concentration over a wide range. The detection limit as calculated according to Clayton's criterion 13.7 μg L- 1. The analyte was successfully determined in milk samples with an average recovery of 100.6 ± 9.8%.

Explosive Chromospheric Evaporation and Warm Rain in a C3.1 Flare Observed by IRIS, Hinode/EIS, and RHESSI

NASA Astrophysics Data System (ADS)

Brosius, Jeffrey W.; Inglis, Andrew R.

2017-10-01

IRIS and EIS observed a GOES C3.1 flare in stare mode on 2014 March 15. The GOES flare started at 00:21:35 and peaked at 00:26:30 UT. The IRIS slit pointed near the center of the flare, while the EIS slit pointed 35\\prime\\prime to its west. About 4 minutes before the GOES flare start, the IRIS C II and Si IV intensities became (and remained) greater than their pre-flare averages, indicating that the flare had begun and that the chromosphere and transition region were involved. IRIS first detected blueshifted Fe xxi emission at 00:22:42 UT, by which time the C II and Si IV intensities had increased by factors around 100 and their profiles were redshifted. Simultaneous, cospatial blueshifted Fe xxi emission with redshifted C II and Si IV emission indicates explosive chromospheric evaporation. EIS spectra reveal Fe xxiii emission that is too weak to measure velocities, and intensity enhancements by factors about 1.7 in the Fe xiv and Fe xvi emission. Lines from both of these coronal ions show redshifts ≈9 km s-1 around 00:24:00 UT, and the Fe xiv 264.7/274.2 intensity ratio reveals an increase of n e from (1.03+/- 0.20)× {10}9 before to (3.58+/- 0.68)× {10}9 cm-3 during the flare. The redshifted coronal line emission and increased n e are consistent with warm rain falling and accumulating in the remote area observed by EIS. A fit to the RHESSI hard X-ray spectrum yields a nonthermal energy injection rate of 4.9× {10}26 erg s-1, from which we estimate a HXR beam energy flux range consistent with explosive evaporation.

Spatial variation and sources of polycyclic aromatic hydrocarbons influenced by intensive land use in an urbanized river network of East China.

PubMed

Bi, Chunjuan; Wang, Xueping; Jia, Jinpu; Chen, Zhenlou

2018-06-15

The concentrations and distribution of polycyclic aromatic hydrocarbons (PAHs) in urbanized river networks are strongly influenced by intensive land use, industrial activities and population density. The spatial variations and their influencing factors of 16 priority PAHs were investigated in surface water, suspended particulate matter (SPM) and sediments among areas under different intensive land uses (industrial areas, agricultural areas, inner city, suburban towns and island areas) in the Shanghai river network, East China. Source apportionment was carried out using isomer ratios of PAHs and Positive Matrix Factorization (PMF). Total concentrations of 16 PAHs ranged from 105.2 to 400.5 ng/L, 108.1 to 1058.8 ng/L and 104.4 to 19,480.0 ng/g in water, SPM and sediments, respectively. The concentrations of PAHs in SPM and sediments varied significantly among areas (p < 0.05), with the highest concentrations in inner city characterized by highly intensive land use and high population density. The PAH concentrations in sediments were positively correlated with those in SPM and were more strongly correlated with black carbon than with total organic carbon, indicating a stronger influence of prolonged anthropogenic contamination than the recent surface input in sediments. Biomass and coal combustion contributed strongly to total PAHs, followed by natural gas combustion in water and SPM, and vehicular emissions in sediments. Vehicular emissions were the strongest contributors in SPM and sediments of the inner city, indicating the strong influence of vehicular transportation to PAHs pollution in the urbanized river network. Copyright © 2018 Elsevier B.V. All rights reserved.

Turnover of Grassland Roots in Mountain Ecosystems Revealed by Their Radiocarbon Signature: Role of Temperature and Management

PubMed Central

Leifeld, Jens; Meyer, Stefanie; Budge, Karen; Sebastia, Maria Teresa; Zimmermann, Michael; Fuhrer, Juerg

2015-01-01

Root turnover is an important carbon flux component in grassland ecosystems because it replenishes substantial parts of carbon lost from soil via heterotrophic respiration and leaching. Among the various methods to estimate root turnover, the root’s radiocarbon signature has rarely been applied to grassland soils previously, although the value of this approach is known from studies in forest soils. In this paper, we utilize the root’s radiocarbon signatures, at 25 plots, in mountain grasslands of the montane to alpine zone of Europe. We place the results in context of a global data base on root turnover and discuss driving factors. Root turnover rates were similar to those of a subsample of the global data, comprising a similar temperature range, but measured with different approaches, indicating that the radiocarbon method gives reliable, plausible and comparable results. Root turnover rates (0.06–1.0 y-1) scaled significantly and exponentially with mean annual temperatures. Root turnover rates indicated no trend with soil depth. The temperature sensitivity was significantly higher in mountain grassland, compared to the global data set, suggesting additional factors influencing root turnover. Information on management intensity from the 25 plots reveals that root turnover may be accelerated under intensive and moderate management compared to low intensity or semi-natural conditions. Because management intensity, in the studied ecosystems, co-varied with temperature, estimates on root turnover, based on mean annual temperature alone, may be biased. A greater recognition of management as a driver for root dynamics is warranted when effects of climatic change on belowground carbon dynamics are studied in mountain grasslands. PMID:25734640

The Kidney and Periodontal Disease (KAPD) study: A pilot randomized controlled trial testing the effect of non-surgical periodontal therapy on chronic kidney disease.

PubMed

Grubbs, Vanessa; Garcia, Faviola; Jue, Bonnie L; Vittinghoff, Eric; Ryder, Mark; Lovett, David; Carrillo, Jacqueline; Offenbacher, Steven; Ganz, Peter; Bibbins-Domingo, Kirsten; Powe, Neil R

2017-02-01

Chronic kidney disease (CKD) remains a prevalent public health problem that disproportionately affects minorities and the poor, despite intense efforts targeting traditional risk factors. Periodontal diseases are common bacterial plaque-induced inflammatory conditions that can respond to treatment and have been implicated as a CKD risk factor. However there is limited evidence that treatment of periodontal disease slows the progression of CKD. We describe the protocol of the Kidney and Periodontal Disease (KAPD) study, a 12-month un-blinded, randomized, controlled pilot trial with two intent-to-treat treatment arms: 1. immediate intensive non-surgical periodontal treatment or 2. rescue treatment with delayed intensive treatment. The goals of this pilot study are to test the feasibility of conducting a larger trial in an ethnically and racially diverse, underserved population (mostly poor and/or low literacy) with both CKD and significant periodontal disease to determine the effect of intensive periodontal treatment on renal and inflammatory biomarkers over a 12-month period. To date, KAPD has identified 634 potentially eligible patients who were invited to in-person screening. Of the 83 (13.1%) of potentially eligible patients who attended in-person screening, 51 (61.4%) were eligible for participation and 46 enrolled in the study. The mean age of participants is 59.2years (range 34 to 73). Twenty of the participants (43.5%) are Black and 22 (47.8%) are Hispanic. Results from the KAPD study will provide needed preliminary evidence of the effectiveness of non-surgical periodontal treatment to slow CKD progression and inform the design future clinical research trials. Copyright © 2016. Published by Elsevier Inc.

The intensity of physical activity influences bone mineral accrual in childhood: the childhood health, activity and motor performance school (the CHAMPS) study, Denmark

PubMed Central

2013-01-01

Background Studies indicate genetic and lifestyle factors can contribute to optimal bone development. In particular, the intensity level of physical activity may have an impact on bone health. This study aims to assess the relationship between physical activity at different intensities and Bone Mineral Content (BMC), Bone Mineral Density (BMD) and Bone Area (BA) accretion. Methods This longitudinal study is a part of The CHAMPS study-DK. Whole-body DXA scans were performed at baseline and after two years follows up. BMC, BMD, and BA were measured. The total body less head (TBLH) values were used. Physical activity (PA) was recorded by accelerometers (ActiGraph, model GT3X). Percentages of different PA intensity levels were calculated and log odds of two intensity levels of activity relative to the third level were calculated. Multilevel regression analyses were used to assess the relationship between the categories of physical activity and bone traits. Results Of 800 invited children, 742 (93%) accepted to participate. Of these, 682/742 (92%) participated at follow up. Complete datasets were obtained in 602/742 (81%) children. Mean (range) of age was 11.5 years (9.7-13.9). PA at different intensity levels was for boys and girls respectively, sedentary 62% and 64%, low 29% for both genders and moderate to high 9% and 7% of the total time. Mean (range) BMC, BMD, and BA was 1179 g (563–2326), 0.84 g/cm2 (0.64-1.15) and 1393 cm2 (851–2164), respectively. Valid accelerometer data were obtained for a mean of 6.1 days, 13 hours per day. Conclusions There 7was a positive relationship between the log odds of moderate to high-level PA versus low level activity and BMC, BMD and BA. Children with an increased proportion of time in moderate to high-level activity as opposed to sedentary and low-level activity achieved positive effects on BMC, BMD and BA. PMID:23452342

The potential for high-intensity interval training to reduce cardiometabolic disease risk.

PubMed

Kessler, Holly S; Sisson, Susan B; Short, Kevin R

2012-06-01

In the US, 34% of adults currently meet the criteria for the metabolic syndrome defined by elevated waist circumference, plasma triglycerides (TG), fasting glucose and/or blood pressure, and decreased high-density lipoprotein cholesterol (HDL-C). While these cardiometabolic risk factors can be treated with medication, lifestyle modification is strongly recommended as a first-line approach. The purpose of this review is to focus on the effect of physical activity interventions and, specifically, on the potential benefits of incorporating higher intensity exercise. Several recent studies have suggested that compared with continuous moderate exercise (CME), high-intensity interval training (HIT) may result in a superior or equal improvement in fitness and cardiovascular health. HIT is comprised of brief periods of high-intensity exercise interposed with recovery periods at a lower intensity. The premise of using HIT in both healthy and clinical populations is that the vigorous activity segments promote greater adaptations via increased cellular stress, yet their short length, and the ensuing recovery intervals, allow even untrained individuals to work harder than would otherwise be possible at steady-state intensity. In this review, we examine the impact of HIT on cardiometabolic risk factors, anthropometric measures of obesity and cardiovascular fitness in both healthy and clinical populations with cardiovascular and metabolic disease. The effects of HIT versus CME on health outcomes were compared in 14 of the 24 studies featuring HIT. Exercise programmes ranged from 2 weeks to 6 months. All 17 studies that measured aerobic fitness and all seven studies that measured insulin sensitivity showed significant improvement in response to HIT, although these changes did not always exceed responses to CME comparison groups. A minimum duration of 12 weeks was necessary to demonstrate improvement in fasting glucose in four of seven studies (57%). A minimum duration of 8 weeks of HIT was necessary to demonstrate improvement in HDL-C in three of ten studies (30%). No studies reported that HIT resulted in improvement of total cholesterol, low-density lipoprotein cholesterol (LDL-C), or TG. At least 12 weeks of HIT was required for reduction in blood pressure to emerge in five studies of participants not already being treated for hypertension. A minimum duration of 12 weeks was necessary to see consistent improvement in the six studies that examined anthropometric measures of obesity in overweight/obese individuals. In the 13 studies with a matched-exercise-volume CME group, improvement in aerobic fitness in response to HIT was equal to (5 studies), or greater than (8 studies) in response to CME. Additionally, HIT has been shown to be safe and effective in patients with a range of cardiac and metabolic dysfunction. In conclusion, HIT appears to promote superior improvements in aerobic fitness and similar improvements in some cardiometabolic risk factors in comparison to CME, when performed by healthy subjects or clinical patients for at least 8-12 weeks. Future studies need to address compliance and efficacy of HIT in the real world with a variety of populations.

[A PARADIGM SHIFT IN THE PERCEPTION OF HEALTH MAINTENANCE FROM INCREASING PHYSICAL ACTIVITY TO DECREASING PHYSICAL INACTIVITY].

PubMed

Rotman, Dani; Constantini, Naama

2016-06-01

Modern man spends most of his waking hours (50-70%) in one form or another of sedentary behavior, defined as activity conducted in a sitting or reclining position involving low energy expenditure. The remaining waking hours are spent performing low intensity physical activity (25-45%) and medium-high intensity physical activity (less than 5%): Despite this distribution, medical research has focused on the impact of increasing medium-high intensity physical activity and many health organizations' recommendations are in accordance. In recent years, research conducted has begun to examine the effect inactivity has on health and has shown that excess sedentary behaviour is an independent risk factor for a wide range of medical problems such as obesity, metabolic syndrome, poor cardiovascular health profile, diabetes mellitus, and possibly cancer. Although the higher risk brought on by sedentary behaviour is partially reduced by increasing medium-high intensity physical activity, it is not completely neutralized. One way to diminish the harm caused by long hours of sitting is to take short breaks during periods of prolonged sitting in order to walk. According to these findings, it is worthwhile to recommend reducing the hours spent in sedentary behaviour, or at least to take frequent short breaks ("activity snacks") during periods of prolonged sitting to get up and walk around.

[Amount and intensity of physical exercise in primary prevention].

PubMed

Smekal, G; Pokan, R; Baron, R; Tschan, H; Bachl, N

2001-01-01

Numerous epidemiological studies have demonstrated an inverse relation between physical activity and physical "fitness" on one hand and premature death and the risk of chronic disease on the other hand. However, most of these studies showed crucial methodological and statistical differences, a fact which caused a lack of consensus of dose and intensity of physical activities for "health benefits". The optimal amount of physical activity to decrease mortality is in literature stated to range between 1,000 and 3,500 motoric kcal per week. Only a few data exist concerning the optimal intensity of preventive physical activities. There is some indication that only "vigorous" but not "non-vigorous" physical activities are associated with decreased mortality. Previous investigations suggest that a "threshold-intensity" (e.g. of at least 6 MET of "conditioning physical activity") is needed to produce an adequate preventive effect. On the other hand it has been documented, that "physical fitness" (endurance capacity) is a decisive factor for a decreased mortality. Therefore it may be assumed, that physical activities are only efficient for health benefits, if they also result in increased physical fitness. Following from this assumption the quality and quantity of training in primary prevention has to be adjusted to the individual requirements (performance, age, gender, health) of men.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gu, M F; Holcomb, C; Jayakuma, J

We present detailed atomic physics models for motional Stark effects (MSE) diagnostic on magnetic fusion devices. Excitation and ionization cross sections of the hydrogen or deuterium beam traveling in a magnetic field in collisions with electrons, ions, and neutral gas are calculated in the first Born approximation. The density matrices and polarization states of individual Stark-Zeeman components of the Balmer {alpha} line are obtained for both beam into plasma and beam into gas models. A detailed comparison of the model calculations and the MSE polarimetry and spectral intensity measurements obtained at the DIII-D tokamak is carried out. Although our beammore » into gas models provide a qualitative explanation for the larger {pi}/{sigma} intensity ratios and represent significant improvements over the statistical population models, empirical adjustment factors ranging from 1.0-2.0 must still be applied to individual line intensities to bring the calculations into full agreement with the observations. Nevertheless, we demonstrate that beam into gas measurements can be used successfully as calibration procedures for measuring the magnetic pitch angle through {pi}/{sigma} intensity ratios. The analyses of the filter-scan polarization spectra from the DIII-D MSE polarimetry system indicate unknown channel and time dependent light contaminations in the beam into gas measurements. Such contaminations may be the main reason for the failure of beam into gas calibration on MSE polarimetry systems.« less

Intensity of the Earth's magnetic field in Greece during the last five millennia: New data from Greek pottery

NASA Astrophysics Data System (ADS)

Tema, Evdokia; Gómez-Paccard, Miriam; Kondopoulou, Despina; Almar, Ylenia

2012-08-01

New archaeointensity results have been obtained from the study of four ceramic collections coming from four different archaeological sites in Greece. The ages of the ceramic fragments, based on archaeological constrains and radiocarbon analysis, range from 2200 BC to 565 AD. Low-field magnetic susceptibility versus temperature reveals a good thermal stability for most of the samples. However, for some samples the thermomagnetic curves are not reversible indicating mineralogical changes during heating. Isothermal remanent magnetisation (IRM) acquisition curves and thermal demagnetisation of three orthogonal IRM components have also been performed. The rock magnetic results identify magnetite and/ or Ti-magnetite as the main magnetic carriers in the studied samples. Classical Thellier experiments with regular partial thermoremanent magnetisation (pTRM) checks have been conducted on 125 specimens belonging to 34 independent ceramic fragments. Only 61 archaeointensity determinations (at specimen level) that correspond to linear NRM-TRM plots were used for the calculation of the site mean archaeointensities. The effect of the anisotropy of the thermoremanent magnetisation (TRM) and cooling rate upon TRM intensity acquisition have been investigated in all specimens. The maximum difference between the TRM anisotropy corrected and uncorrected intensities is around 30% at specimen level confirming that the TRM effect can be very important in ceramic samples. Cooling rate correction factors determined per specimen are up to 10% with only one exception that reaches 35%. Despite the moderate success rate of archaeointensity determination (around 50%) reliable mean site intensities have been obtained, with in situ intensities ranging from 53.6 ± 4.1 to 69.3 ± 3.9 μT, corresponding to virtual axial dipole moments from 9.2 ± 0.7 to 11.9 ± 0.7 × 1022 Am2. The new data are reasonably consistent with other available data for the studied region as well as with the SV reference curves for Greece and the South Balkan Peninsula, and the regional and global geomagnetic field models. Combined with previously published data from the area, they confirm that important changes of the Earth's magnetic field intensity occurred in Greece during the last five millennia. For some periods, the available archaeointensity data for the Balkan area show a large dispersion, even for data corresponding to high quality intensity standards, whereas for other periods their limited number prevents an accurate description of geomagnetic field intensity changes. This evidences the need of new reliable and well dated archaeointensity data in order to obtain a robust description of geomagnetic field intensity changes during the last five millennia in this area.

Fundamental bounds on the operation of Fano nonlinear isolators

NASA Astrophysics Data System (ADS)

Sounas, Dimitrios L.; Alù, Andrea

2018-03-01

Nonlinear isolators have attracted significant attention for their ability to break reciprocity and provide isolation without the need of an external bias. A popular approach for the design of such devices is based on Fano resonators, which, due to their sharp frequency response, can lead to very large isolation for moderate input intensities. Here, we show that, independent of their specific implementation, these devices are subject to fundamental bounds on the transmission coefficient in the forward direction versus their quality factor, input power, and nonreciprocal intensity range. Our analysis quantifies a general tradeoff between forward transmission and these metrics, stemming directly from time-reversal symmetry, and that unitary transmission is only possible for vanishing nonreciprocity. Our results also shed light on the operation of resonant nonlinear isolators, reveal their fundamental limitations, and provide indications on how it is possible to design nonlinear isolators with optimal performance.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rowland, Clare E.; Fedin, Igor; Diroll, Benjamin T.

Elevated temperature optoelectronic performance of semiconductor nanomaterials remains an important issue for applications. Here we examine two-dimensional CdSe nanoplatelets (NPs) and CdS/CdSe/CdS shell/core/shell sandwich NPs at temperatures ranging from 300-700 K using static and transient spectroscopies as well as in-situ transmission electron microscopy. NPs exhibit reversible changes in PL intensity, spectral position, and emission linewidth with temperature elevation up to ~500 K, losing a factor of ~8 to 10 in PL intensity at 400 K relative to ambient. Temperature elevation above ~500 K yields thickness dependent, irreversible degradation in optical properties. Electron microscopy relates stability of the NP morphology upmore » to near 600 K followed by sintering and evaporation at still higher temperatures. The mechanism of reversible PL loss, based on differences in decay dynamics between time-resolved photoluminescence and transient absorption, arise primarily from hole trapping in both NPs and sandwich NPs.« less

Characteristics of magnetospheric radio noise spectra

NASA Technical Reports Server (NTRS)

Herman, J. R.

1976-01-01

Magnetospheric radio noise spectra (30 kHz to 10 MHz) taken by IMP-6 and RAE-2 exhibit time-varying characteristics which are related to spacecraft position and magnetospheric processes. In the mid-frequency range (100-1,000 kHz) intense noise peaks rise by a factor of 100 or more above background; 80% of the peak frequencies are within the band 125 kHz to 600 kHz, and the peak occurs most often (18% of the time) at 280 kHz. This intense mid-frequency noise has been detected at radial distances from 1.3 Re to 60 Re on all sides of the Earth during magnetically quiet as well as disturbed periods. Maximum occurrence of the mid-frequency noise is in the evening to midnight hours where splash-type energetic particle precipitation takes place. ""Magnetospheric lightning'' can be invoked to explain the spectral shape of the observed spectra.

The social inefficiency of regulating indirect land use change due to biofuels

DOE PAGES

Khanna, Madhu; Wang, Weiwei; Hudiburg, Tara W.; ...

2017-06-26

Efforts to reduce the indirect land use change (ILUC) -related carbon emissions caused by biofuels has led to inclusion of an ILUC factor as a part of the carbon intensity of biofuels in a Low Carbon Fuel Standard. While previous research has provided varying estimates of this ILUC factor, there has been no research examining the economic effects and additional carbon savings from including this factor in implementing a Low Carbon Fuel Standard. In this article we show that inclusion of an ILUC factor in a national Low Carbon Fuel Standard led to additional abatement of cumulative emissions over 2007–2027more » by 1.3 to 2.6% (0.6–1.1 billion mega-grams carbon-dioxide-equivalent (Mg CO 2e -1) compared to those without an ILUC factor, depending on the ILUC factors utilized. The welfare cost to the US of this additional abatement ranged from 61 dollars to 187 dollars Mg CO 2e -1 and was substantially greater than the social cost of carbon of $50 Mg CO 2e -1.« less

The social inefficiency of regulating indirect land use change due to biofuels

PubMed Central

Khanna, Madhu; Wang, Weiwei; Hudiburg, Tara W.; DeLucia, Evan H.

2017-01-01

Efforts to reduce the indirect land use change (ILUC) -related carbon emissions caused by biofuels has led to inclusion of an ILUC factor as a part of the carbon intensity of biofuels in a Low Carbon Fuel Standard. While previous research has provided varying estimates of this ILUC factor, there has been no research examining the economic effects and additional carbon savings from including this factor in implementing a Low Carbon Fuel Standard. Here we show that inclusion of an ILUC factor in a national Low Carbon Fuel Standard led to additional abatement of cumulative emissions over 2007–2027 by 1.3 to 2.6% (0.6–1.1 billion mega-grams carbon-dioxide-equivalent (Mg CO2e−1) compared to those without an ILUC factor, depending on the ILUC factors utilized. The welfare cost to the US of this additional abatement ranged from $61 to $187 Mg CO2e−1 and was substantially greater than the social cost of carbon of $50 Mg CO2e−1. PMID:28649991

The social inefficiency of regulating indirect land use change due to biofuels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khanna, Madhu; Wang, Weiwei; Hudiburg, Tara W.

Efforts to reduce the indirect land use change (ILUC) -related carbon emissions caused by biofuels has led to inclusion of an ILUC factor as a part of the carbon intensity of biofuels in a Low Carbon Fuel Standard. While previous research has provided varying estimates of this ILUC factor, there has been no research examining the economic effects and additional carbon savings from including this factor in implementing a Low Carbon Fuel Standard. In this article we show that inclusion of an ILUC factor in a national Low Carbon Fuel Standard led to additional abatement of cumulative emissions over 2007–2027more » by 1.3 to 2.6% (0.6–1.1 billion mega-grams carbon-dioxide-equivalent (Mg CO 2e -1) compared to those without an ILUC factor, depending on the ILUC factors utilized. The welfare cost to the US of this additional abatement ranged from 61 dollars to 187 dollars Mg CO 2e -1 and was substantially greater than the social cost of carbon of $50 Mg CO 2e -1.« less

Factors influencing warfarin response in hospitalized patients

PubMed Central

Abdel-Aziz, Mahmoud I.; Ali, Mostafa A. Sayed; Hassan, Ayman K.M.; Elfaham, Tahani H.

2015-01-01

The objective of this study was to investigate the influence of simultaneous factors that potentially keep patients far from achieving target INR range at discharge in hospitalized patients. Prospective cross-sectional observational study conducted at the Cardiology Department and Intensive Care Unit (ICU) of the Assiut University Hospitals. One-hundred and twenty patients were enrolled in the study from July 2013 to January 2014. Outcome measures were discharge INRs, bleeding and thromboembolic episodes. Bivariate analysis and multinomial logistic regression were conducted to determine independent risk factors that can keep patients outside target INR range. Patients who were newly initiated warfarin on hospital admission were given low initiation dose (2.8 mg ± 0.9). They were more likely to have INR values below 1.5 during hospital stay, 13 (27.7%) patients compared with 9 (12.3%) previously treated patients, respectively (p = .034). We found that the best predictors of achieving below target INR range relative to within target INR range were; shorter hospital stay periods (OR, 0.82 for every day increase [95% CI, 0.72–0.94]), being a male patient (OR, 2.86 [95% CI, 1.05–7.69]), concurrent infection (OR, 0.21 [95% CI, 0.07–0.59]) and new initiation of warfarin therapy on hospital admission (OR, 3.73 [95% CI, 1.28–10.9]). Gender, new initiation of warfarin therapy on hospital admission, shorter hospital stay periods and concurrent infection can have a significant effect on discharge INRs. Initiation of warfarin without giving loading doses increases the risk of having INRs below 1.5 during hospital stay and increases the likelihood of a patient to be discharged with INR below target range. Following warfarin dosing nomograms and careful monitoring of the effect of various factors on warfarin response should be greatly considered. PMID:26702259

Stress intensity factor in a tapered specimen

NASA Technical Reports Server (NTRS)

Xue-Hui, L.; Erdogan, F.

1985-01-01

The general problem of a tapered specimen containing an edge crack is formulated in terms of a system of singular integral equations. The equations are solved and the stress intensity factor is calculated for a compact and for a slender tapered specimen, the latter simulating the double cantilever beam. The results are obtained primarily for a pair of concentrated forces and for crack surface wedge forces. The stress intensity factors are also obtained for a long strip under uniform tension which contains inclined edge cracks.

Bullous pemphigoid and pemphigus vulgaris: correlated behaviour of serum VEGF, sE-selectin and TNF-alpha levels.

PubMed

Ameglio, F; D'Auria, L; Cordiali-Fei, P; Mussi, A; Valenzano, L; D'Agosto, G; Ferraro, C; Bonifati, C; Giacalone, B

1997-01-01

Recently, we reported that soluble E-selectin (sE-selectin), an isoform of the cell membrane E-selectin, an adhesion molecule synthesized only by endothelial cells, is significantly increased in sera of the patients with bullous pemphigoid (PB) or pemphigus vulgaris. A significant correlation was also found between the serum sE-selectin levels and the number of skin lesions, suggesting the possible use of this molecule to gauge disease intensity before therapy. One of the sE-selectin inducers is tumor nerosis factor-alpha (TNF-alpha), that is also able to enhance vascular endothelial growth factor (VEGF), a strong endothelium activator. On the basis of these observations, the present study was conducted to analyze the serum levels of VEGF, sE-selectin, and TNF-alpha in 8 patients with BP (age: 82, range 54-87, 7 males, 1 female) and in 6 patients affected affected with PV (age: 55, range 44-65; 5 males, 1 female) and to verify possible correlations between these variables and the disease activity, In addition, serum sE-selectin levels were measured over time and compared with the serum anti-epithelium antibodies titers. The sE-selectin, VEGF and TNF-alpha levels were measured in the samples by means of commercially available ELISA kit. The same samples were also employed to measure the anti-epithelium antibody titers. Serum VEGF, sE-selectin and TNF-alpha levels were significantly correlated each other (p at least < 0.01). All three variables were also significantly correlated with the number of lesions (p at least < 0.01). Serum VEGF levels were found increased (median = 178 pg/ml, range 37-595) as compared to 28 healthy controls (median = 135 pg/ml, range 18/269, p < 0.05). Also serum TNF-alpha levels were found increased (median = 5.5 pg/ml, range < 0.1-41.0) as compared to 28 healthy controls (median < 0.1 pg/ml, range < 0.1-5.3), p < 0.01). When the patients were observed over time, serum sE-selectin levels highly correlated with the disease intensity in both dermatoses, although with different regression curves. These data further underline the endothelium involvement in these bullous dermatoses and stress the possibility of employing sE-selectin as a non-specific follow-up marker of both BP and PV.

Expertise and age-related changes in components of intelligence.

PubMed

Masunaga, H; Horn, J

2001-06-01

In a sample of 263 male GO players at 48 levels of expertise and ranging from 18 to 78 years of age, it was found that factors of expertise deductive reasoning (EDR) and expertise working memory (EWM) were independent of factors of fluid reasoning (Gf) and short-term working memory (STWM) that, along with cognitive speed (Gs), have been found to characterize decline of intelligence in adulthood. The main effects of analyses of cross-sectional age differences indicated age-related decline in EDR and EWM as well as in Gf, STWM, and Gs. However, interaction and partialing analyses indicated that decline in EDR and EWM decreased to no decline with increase in level of expertise. The results thus suggest that with increase in factors known to raise the level of expertise--particularly, intensive, well-designed practice--there may be no age-related decline in the intelligence that is measured in the abilities of expertise.

[Features of control of electromagnetic radiation emitted by personal computers].

PubMed

Pal'tsev, Iu P; Buzov, A L; Kol'chugin, Iu I

1996-01-01

Measurements of PC electromagnetic irradiation show that the main sources are PC blocks emitting the waves of certain frequencies. Use of wide-range detectors measuring field intensity in assessment of PC electromagnetic irradiation gives unreliable results. More precise measurements by selective devices are required. Thus, it is expedient to introduce a term "spectral density of field intensity" and its maximal allowable level. In this case a frequency spectrum of PC electromagnetic irradiation is divided into 4 ranges, one of which is subjected to calculation of field intensity for each harmonic frequency, and others undergo assessment of spectral density of field intensity.

Three-dimensional analysis of surface crack-Hertzian stress field interaction

NASA Technical Reports Server (NTRS)

Ballarini, R.; Hsu, Y.

1989-01-01

The results are presented of a stress intensity factor analysis of semicircular surface cracks in the inner raceway of an engine bearing. The loading consists of a moving spherical Hertzian contact load and an axial stress due to rotation and shrink fit. A 3-D linear elastic Boundary Element Method code was developed to perform the stress analysis. The element library includes linear and quadratic isoparametric surface elements. Singular quarter point elements were employed to capture the square root displacement variation and the inverse square root stress singularity along the crack front. The program also possesses the capability to separate the whole domain into two subregions. This procedure enables one to solve nonsymmetric fracture mechanics problems without having to separate the crack surfaces a priori. A wide range of configuration parameters was investigated. The ratio of crack depth to bearing thickness was varied from one-sixtieth to one-fifth for several different locations of the Hertzian load. The stress intensity factors for several crack inclinations were also investigated. The results demonstrate the efficiency and accuracy of the Boundary Element Method. Moreover, the results can provide the basis for crack growth calculations and fatigue life prediction.

The energy balance and pressure in the solar transition zone for network and active region features

NASA Technical Reports Server (NTRS)

Nicolas, K. R.; Bartoe, J.-D. F.; Brueckner, G. E.; Vanhoosier, M. E.

1979-01-01

The electron pressure and energy balance in the solar transition zone are determined for about 125 network and active region features on the basis of high spectral and spatial resolution extreme ultraviolet spectra. Si III line intensity ratios obtained from the Naval Research Laboratory high-resolution telescope and spectrograph during a rocket flight are used as diagnostics of electron density and pressure for solar features near 3.5 x 10 to the 4th K. Observed ratios are compared with the calculated dependence of the 1301 A/1312 A and 1301 A/1296 A line intensity ratios on electron density, temperature and pressure. Electron densities ranging from 2 x 10 to the 10th/cu cm to 10 to the 12th/cu cm and active region pressures from 3 x 10 to the 15th to 10 to the 16th/cu cm K are obtained. Energy balance calculations reveal the balance of the divergence of the conductive flux and turbulent energy dissipation by radiative energy losses in a plane-parallel homogeneous transition zone (fill factor of 1), and an energy source requirement for a cylindrical zone geometry (fill factor less than 0.04).

Influence of environmental factors on removal of oxides of nitrogen by a photocatalytic coating.

PubMed

Cros, Clement J; Terpeluk, Alexandra L; Crain, Neil E; Juenger, Maria C G; Corsi, Richard L

2015-08-01

Nitrogen oxides (NOx) emitted from combustion processes have elevated concentrations in large urban areas. They cause a range of adverse health effects, acid rain, and are precursors to formation of other atmospheric pollutants, such as ozone, peroxyacetyl nitrate, and inorganic aerosols. Photocatalytic materials containing a semi-conductor that can be activated by sunlight, such as titanium dioxide, have been studied for their ability to remove NOx. The study presented herein aims to elucidate the environmental parameters that most influence the NOx removal efficiency of photocatalytic coatings in hot and humid climate conditions. Concrete samples coated with a commercially available photocatalytic coating (a stucco) and an uncoated sample have been tested in a reactor simulating reasonable summertime outdoor sunlight, relative humidity and temperature conditions in southeast Texas. Two-level full factorial experiments were completed on each sample for five parameters. It was found that contact time, relative humidity and temperature significantly influenced both NO and NO₂removal. Elevated concentrations of organic pollutants reduced NO removal by the coating. Ultra-violet light intensity did not significantly influence removal of NO or NO₂, however, ultra-violet light intensity was involved in a two-factor interaction that significantly influenced removal of both NO and NO₂.

Backscattering enhancement factor dependence of a Laguerre-Gaussian laser beam propagating on the location path in the atmosphere on optical turbulence intensity

NASA Astrophysics Data System (ADS)

Rytchkov, D. S.

2017-11-01

The paper presents the results of a study of the backscattering enhancement factor (BSE) dependence of vortex LaguerreGaussian beams propagating on monostatic location paths in the atmosphere on optical turbulence intensity. The numeric simulation split-step method of laser beam propagation was used to obtain BSE factor values of a laser beam propagated on monostatic location path in the turbulent atmosphere and reflected from a diffuse target. It is shown that BSE factor of the averaged intensity of a backscattered vortex laser beam of any topological charge is less than BSE factor values of backscattered Gaussian beam in arbitrary turbulent conditions.

Comparative speaking, shouting and singing voice range profile measurement: physiological and pathological aspects.

PubMed

Hacki, T

1996-01-01

The Voice Range Profile (VRP) measurement offers a method for the investigation of voice modalities i.e. speaking voice, shouting voice and singing voice in their mutual pitch and intensity relations. The parameters FO and SPL are evaluated by means of automatic pitch and SPL measurements from (1) sustained phonation /a:/ in the speaker's natural pitch and intensity range, (2) the continuous speaking voice beginning with Pianissimo up to Fortissimo, (3) the shouting voice. Vocal intensity is plotted vertically, vocal pitch horizontally. The displays of the vocal intensity versus fundamental frequency are defined as singing voice range profile (VRP), speaking VRP and shouting VRP. The VRPs are superimposed on the same plot. Their form, their shape and their position to each other are analysed. The physiological relationships between the VRPs of the different voice modalities to each other are defined. The pathological relationships between the VRPs (i.e. reduction, shifting) give information about etiology and pathomechanism of voice disorders.

Regulation of Oligomeric Organization of the Serotonin 5-Hydroxytryptamine 2C (5-HT2C) Receptor Observed by Spatial Intensity Distribution Analysis*

PubMed Central

Ward, Richard J.; Pediani, John D.; Godin, Antoine G.; Milligan, Graeme

2015-01-01

The questions of whether G protein-coupled receptors exist as monomers, dimers, and/or oligomers and if these species interconvert in a ligand-dependent manner are among the most contentious current issues in biology. When employing spatial intensity distribution analysis to laser scanning confocal microscope images of cells stably expressing either a plasma membrane-associated form of monomeric enhanced green fluorescent protein (eGFP) or a tandem version of this fluorophore, the eGFP tandem was identified as a dimer. Similar studies on cells stably expressing an eGFP-tagged form of the epidermal growth factor receptor demonstrated that, although largely a monomer in the basal state, this receptor rapidly became predominantly dimeric upon the addition of its ligand epidermal growth factor. In cells induced to express an eGFP-tagged form of the serotonin 5-hydroxytryptamine 2C (5-HT2C) receptor, global analysis of construct quantal brightness was consistent with the predominant form of the receptor being dimeric. However, detailed spatial intensity distribution analysis demonstrated the presence of multiple forms ranging from monomers to higher-order oligomers. Furthermore, treatment with chemically distinct 5-HT2C receptor antagonists resulted in a time-dependent change in the quaternary organization to one in which there was a preponderance of receptor monomers. This antagonist-mediated effect was reversible, because washout of the ligand resulted in the regeneration of many of the oligomeric forms of the receptor. PMID:25825490

Rates and intensity of re-infection with human helminths after treatment and the influence of individual, household, and environmental factors in a Brazilian community.

PubMed

Cundill, Bonnie; Alexander, Neal; Bethony, Jeff M; Diemert, David; Pullan, Rachel L; Brooker, Simon

2011-09-01

This study quantifies the rate and intensity of re-infection with human hookworm and Schistosoma mansoni infection 12 months following successful treatment, and investigates the influence of socio-economic, geographical and environmental factors. A longitudinal study of 642 individuals aged over 5 years was conducted in Minas Gerais State, Brazil from June 2004 to March 2006. Risk factors were assessed using interval censored regression for the rate and negative binomial regression for intensity. The crude rate and intensity of hookworm re-infection was 0·21 per year (95% confidence interval (CI) 0·15-0·29) and 70·9 epg (95% CI 47·2-106·6). For S. mansoni the rate was 0·06 per year (95% CI 0·03-0·10) and intensity 6·51 epg (95% CI 3·82-11·11). Rate and intensity of re-infection with hookworm were highest among males and positively associated with previous infection status, absence of a toilet and house structure. Rate and intensity of S. mansoni re-infection were associated with previous infection status as well as geographical, environmental and socio-economic factors. The implications of findings for the design of anti-helminth vaccine trials are discussed.

The intermediate polar GK Persei: An unstable relation of the X-ray and the optical intensities in a series of outbursts

NASA Astrophysics Data System (ADS)

Šimon, V.

2015-03-01

Context. GK Per is an intermediate polar that has been displaying dwarf nova outbursts since the middle of the twentieth century. Aims: I analyzed a series of such outbursts in the optical and X-ray bands. I pay attention to the relation of intensities of the optical and X-ray emissions, and its reproducibility in a series of these consecutive outbursts. Methods: This analysis uses the data from the BAT/Swift, ASM/RXTE, AAVSO, and AFOEV databases. It investigates the relation of the time evolution of the profiles of outbursts in the individual bands (hard X-ray, medium/hard X-ray, and optical). Results: This analysis shows that the X-ray intensity steeply rises only in the start of the optical outburst and steeply declines only when the optical outburst comes to its end. However, the 1.5-50 keV band intensity saturates and balances on a plateau during the outburst. (The longer the outburst, the longer its plateau.) The peak X-ray intensities of this series display a significantly narrower range than the optical ones (a factor of about two versus a factor of about eight). This implies a discrepancy between the mass flow through the disk and the production of the X-ray emission via bremsstrahlung at the polar caps of the white dwarf. This discrepancy is the largest in the time of the peak optical intensity when the whole disk (or at least its inner part) is in the hot state and the flow of matter through the disk is the greatest. This study shows that a series of outbursts constitutes more general properties of this discrepancy. I argue that the saturation of the X-ray luminosity in outburst cannot be caused by a dominant increase in X-ray absorption. In the interpretation, large structural changes of the accreting regions at the magnetic poles of the white dwarf occur during the outburst. A buried shock proposed by some authors for polars is also promising for explaining the X-ray light curves of outbursts of GK Per. This research made use of the BAT/Swift, ASM/RXTE, AAVSO, and AFOEV databases.

Depth and Medium-Scale Spatial Processes Influence Fish Assemblage Structure of Unconsolidated Habitats in a Subtropical Marine Park

PubMed Central

Schultz, Arthur L.; Malcolm, Hamish A.; Bucher, Daniel J.; Linklater, Michelle; Smith, Stephen D. A.

2014-01-01

Where biological datasets are spatially limited, abiotic surrogates have been advocated to inform objective planning for Marine Protected Areas. However, this approach assumes close correlation between abiotic and biotic patterns. The Solitary Islands Marine Park, northern NSW, Australia, currently uses a habitat classification system (HCS) to assist with planning, but this is based only on data for reefs. We used Baited Remote Underwater Videos (BRUVs) to survey fish assemblages of unconsolidated substrata at different depths, distances from shore, and across an along-shore spatial scale of 10 s of km (2 transects) to examine how well the HCS works for this dominant habitat. We used multivariate regression modelling to examine the importance of these, and other environmental factors (backscatter intensity, fine-scale bathymetric variation and rugosity), in structuring fish assemblages. There were significant differences in fish assemblages across depths, distance from shore, and over the medium spatial scale of the study: together, these factors generated the optimum model in multivariate regression. However, marginal tests suggested that backscatter intensity, which itself is a surrogate for sediment type and hardness, might also influence fish assemblages and needs further investigation. Species richness was significantly different across all factors: however, total MaxN only differed significantly between locations. This study demonstrates that the pre-existing abiotic HCS only partially represents the range of fish assemblages of unconsolidated habitats in the region. PMID:24824998

Quantitative analysis of crystalline pharmaceuticals in powders and tablets by a pattern-fitting procedure using X-ray powder diffraction data.

PubMed

Yamamura, S; Momose, Y

2001-01-16

A pattern-fitting procedure for quantitative analysis of crystalline pharmaceuticals in solid dosage forms using X-ray powder diffraction data is described. This method is based on a procedure for pattern-fitting in crystal structure refinement, and observed X-ray scattering intensities were fitted to analytical expressions including some fitting parameters, i.e. scale factor, peak positions, peak widths and degree of preferred orientation of the crystallites. All fitting parameters were optimized by the non-linear least-squares procedure. Then the weight fraction of each component was determined from the optimized scale factors. In the present study, well-crystallized binary systems, zinc oxide-zinc sulfide (ZnO-ZnS) and salicylic acid-benzoic acid (SA-BA), were used as the samples. In analysis of the ZnO-ZnS system, the weight fraction of ZnO or ZnS could be determined quantitatively in the range of 5-95% in the case of both powders and tablets. In analysis of the SA-BA systems, the weight fraction of SA or BA could be determined quantitatively in the range of 20-80% in the case of both powders and tablets. Quantitative analysis applying this pattern-fitting procedure showed better reproducibility than other X-ray methods based on the linear or integral intensities of particular diffraction peaks. Analysis using this pattern-fitting procedure also has the advantage that the preferred orientation of the crystallites in solid dosage forms can be also determined in the course of quantitative analysis.

Spatial distributing characteristics of land use in the southern slope of mid-Himalaya Mountains

NASA Astrophysics Data System (ADS)

Lu, Chen

2014-12-01

The southern slope of mid-Himalayan Mountains located in China's Qomolangma National Natural Reserve in Tibet Autonomous Region, is made up of several non-continuous valleys. The study collected the data including DEM(SRTM90m), 1/250,000 land use map(year 2000), 1/100 million vegetation types map ,satellite images of 4 typical valleys on Google Earth Planet Map. Made use of ArcGIS9.3 spatial analysis technology, analyzed into the 2 aspects— Mountain altitudinal belts and slope gradient of soil types of Qinghai-Tibet Plateau, so as to abtain the spatial distributing characteristics of farmland and grassland in the research areas. The conclusions indicates that: (1)no farmland below 2200m altitude, land use is influenced intensively by slope gradient factor in the altitude range of < 2500m; (2)it is in 2500m-3800m altitude range meanwhile on the 2 farming suitable slope gradient belts(<5°, 5-15°) that the very focus zone has got the relatively larger potential, suitability and yield of farming utilization; (3)on the 3 grazing suitable slope gradient belts(<5°,5-15°,15-35°), the respective fodder quantities of the 4 valleys has low differences. land use of the 4 valleys are intensively restricted by altitude and slope gradient factors so that cultivating and grazing activities take place widely on the farming unsuitable slope gradient belts(15-35°,>35°) and grazing unsuitable slope gradient belt(>35°), which is disadvantaged to ecological environmental protection and rational utilization of land resources.

[Spectrum simulation based on data derived from red tide].

PubMed

Liu, Zhen-Yu; Cui, Ting-Wei; Yue, Jie; Jiang, Tao; Cao, Wen-Xi; Ma, Yi

2011-11-01

The present paper utilizes the absorption data of red tide water measured during the growing and dying course to retrieve imaginary part of the index of refraction based on Mie theory, carries out the simulation and analysis of average absorption efficiency factors, average backscattering efficiency factors and scattering phase function. The analysis of the simulation shows that Mie theory can be used to reproduce the absorption property of Chaetoceros socialis with an average error of 11%; the average backscattering efficiency factors depend on the value of absorption whose maximum value corresponds to the wavelength range from 400 to 700 nanometer; the average backscattering efficiency factors showed a maximum value on 17th with a low value during the outbreak of red tide and the minimum on 21th; the total scattering, weakly depending on the absorption, is proportional to the size parameters which represent the relative size of cell diameter with respect to the wavelength, while the angle scattering intensity is inversely proportional to wavelength.

Generalized weighted ratio method for accurate turbidity measurement over a wide range.

PubMed

Liu, Hongbo; Yang, Ping; Song, Hong; Guo, Yilu; Zhan, Shuyue; Huang, Hui; Wang, Hangzhou; Tao, Bangyi; Mu, Quanquan; Xu, Jing; Li, Dejun; Chen, Ying

2015-12-14

Turbidity measurement is important for water quality assessment, food safety, medicine, ocean monitoring, etc. In this paper, a method that accurately estimates the turbidity over a wide range is proposed, where the turbidity of the sample is represented as a weighted ratio of the scattered light intensities at a series of angles. An improvement in the accuracy is achieved by expanding the structure of the ratio function, thus adding more flexibility to the turbidity-intensity fitting. Experiments have been carried out with an 850 nm laser and a power meter fixed on a turntable to measure the light intensity at different angles. The results show that the relative estimation error of the proposed method is 0.58% on average for a four-angle intensity combination for all test samples with a turbidity ranging from 160 NTU to 4000 NTU.

Technique for compressing light intensity ranges utilizing a specifically designed liquid crystal notch filter

DOEpatents

Rushford, Michael C.

1988-01-01

A pin hole camera assembly for use in viewing an object having a relatively large light intensity range, for example a crucible containing molten metal in an atomic vapor laser isotope separation (AVLIS) system is disclosed herein. The assembly includes means for optically compressing the light intensity range appearing at its input sufficient to make it receivable and decipherable by a standard video camera. To accomplish this, the assembly utilizes the combination of interference filter and a liquid crystal notch filter. The latter which preferably includes a cholesteric liquid crystal arrangement is configured to pass light at all wavelengths, except a relatively narrow wavelength band which defines the filter's notch, and includes means for causing the notch to vary to at least a limited extent with the intensity of light at its light incidence surface.

Weaning from mechanical ventilation: factors that influence intensive care nurses' decision-making.

PubMed

Tingsvik, Catarina; Johansson, Karin; Mårtensson, Jan

2015-01-01

The aim of the study was to describe the factors that influence intensive care nurses' decision-making when weaning patients from mechanical ventilation. Patients with failing vital function may require respiratory support. Weaning from mechanical ventilation is a process in which the intensive care nurse participates in both planning and implementation. A qualitative approach was used. The data were collected by means of semi-structured interviews with 22 intensive care nurses. The interviews were transcribed and analysed using qualitative content analysis. One theme emerged: 'A complex nursing situation where the patient receives attention and which is influenced by the current care culture'. There was consensus that the overall assessment of the patient made by the intensive care nurse was the main factor that influenced the decision-making process. This assessment was a continuous process consisting of three factors: the patient's perspective as well as her/his physical and mental state. On the other hand, there was a lack of consensus about what other factors influenced the decision-making process. These factors included the care culture constituted by the characteristics of the team, the intensive care nurses' professional skills, personalities and ability to be present. The individual overall assessment of the patient enabled nursing care from a holistic perspective. Furthermore, the weaning process can be more effective and potential suffering reduced by creating awareness of the care culture's impact on the decision-making process. © 2014 British Association of Critical Care Nurses.

Use of plan quality degradation to evaluate tradeoffs in delivery efficiency and clinical plan metrics arising from IMRT optimizer and sequencer compromises

PubMed Central

Wilkie, Joel R.; Matuszak, Martha M.; Feng, Mary; Moran, Jean M.; Fraass, Benedick A.

2013-01-01

Purpose: Plan degradation resulting from compromises made to enhance delivery efficiency is an important consideration for intensity modulated radiation therapy (IMRT) treatment plans. IMRT optimization and/or multileaf collimator (MLC) sequencing schemes can be modified to generate more efficient treatment delivery, but the effect those modifications have on plan quality is often difficult to quantify. In this work, the authors present a method for quantitative assessment of overall plan quality degradation due to tradeoffs between delivery efficiency and treatment plan quality, illustrated using comparisons between plans developed allowing different numbers of intensity levels in IMRT optimization and/or MLC sequencing for static segmental MLC IMRT plans. Methods: A plan quality degradation method to evaluate delivery efficiency and plan quality tradeoffs was developed and used to assess planning for 14 prostate and 12 head and neck patients treated with static IMRT. Plan quality was evaluated using a physician's predetermined “quality degradation” factors for relevant clinical plan metrics associated with the plan optimization strategy. Delivery efficiency and plan quality were assessed for a range of optimization and sequencing limitations. The “optimal” (baseline) plan for each case was derived using a clinical cost function with an unlimited number of intensity levels. These plans were sequenced with a clinical MLC leaf sequencer which uses >100 segments, assuring delivered intensities to be within 1% of the optimized intensity pattern. Each patient's optimal plan was also sequenced limiting the number of intensity levels (20, 10, and 5), and then separately optimized with these same numbers of intensity levels. Delivery time was measured for all plans, and direct evaluation of the tradeoffs between delivery time and plan degradation was performed. Results: When considering tradeoffs, the optimal number of intensity levels depends on the treatment site and on the stage in the process at which the levels are limited. The cost of improved delivery efficiency, in terms of plan quality degradation, increased as the number of intensity levels in the sequencer or optimizer decreased. The degradation was more substantial for the head and neck cases relative to the prostate cases, particularly when fewer than 20 intensity levels were used. Plan quality degradation was less severe when the number of intensity levels was limited in the optimizer rather than the sequencer. Conclusions: Analysis of plan quality degradation allows for a quantitative assessment of the compromises in clinical plan quality as delivery efficiency is improved, in order to determine the optimal delivery settings. The technique is based on physician-determined quality degradation factors and can be extended to other clinical situations where investigation of various tradeoffs is warranted. PMID:23822412

[Sound improves distinction of low intensities of light in the visual cortex of a rabbit].

PubMed

Polianskiĭ, V B; Alymkulov, D E; Evtikhin, D V; Chernyshev, B V

2011-01-01

Electrodes were implanted into cranium above the primary visual cortex of four rabbits (Orictolagus cuniculus). At the first stage, visual evoked potentials (VEPs) were recorded in response to substitution of threshold visual stimuli (0.28 and 0.31 cd/m2). Then the sound (2000 Hz, 84 dB, duration 40 ms) was added simultaneously to every visual stimulus. Single sounds (without visual stimuli) did not produce a VEP-response. It was found that the amplitude ofVEP component N1 (85-110 ms) in response to complex stimuli (visual and sound) increased 1.6 times as compared to "simple" visual stimulation. At the second stage, paired substitutions of 8 different visual stimuli (range 0.38-20.2 cd/m2) by each other were performed. Sensory spaces of intensity were reconstructed on the basis of factor analysis. Sensory spaces of complexes were reconstructed in a similar way for simultaneous visual and sound stimulation. Comparison of vectors representing the stimuli in the spaces showed that the addition of a sound led to a 1.4-fold expansion of the space occupied by smaller intensities (0.28; 1.02; 3.05; 6.35 cd/m2). Also, the addition of the sound led to an arrangement of intensities in an ascending order. At the same time, the sound 1.33-times narrowed the space of larger intensities (8.48; 13.7; 16.8; 20.2 cd/m2). It is suggested that the addition of a sound improves a distinction of smaller intensities and impairs a dis- tinction of larger intensities. Sensory spaces revealed by complex stimuli were two-dimensional. This fact can be a consequence of integration of sound and light in a unified complex at simultaneous stimulation.

Range Atmospheric and Oceanic Environmental Support Capabilities

DTIC Science & Technology

2011-12-01

Precipitation location/intensity, thunderstorm location/intensity, rainfall/flash flood warning, hydrometer characterization, wind warnings, and...intensity, lightning monitoring, rainfall and flash flood warning, hydrometer characterization, and wind warnings. b. Satellite: MTSAT, GOES-10

Effects of a high-intensity interval training program versus a moderate-intensity continuous training program on maximal oxygen uptake and blood pressure in healthy adults: study protocol for a randomized controlled trial.

PubMed

Arboleda Serna, Víctor Hugo; Arango Vélez, Elkin Fernando; Gómez Arias, Rubén Darío; Feito, Yuri

2016-08-18

Participation in aerobic exercise generates increased cardiorespiratory fitness, which results in a protective factor for cardiovascular disease and all-cause mortality. High-intensity interval training might cause higher increases in cardiorespiratory fitness in comparison with moderate-intensity continuous training; nevertheless, current evidence is not conclusive. To our knowledge, this is the first study to test the effect of high-intensity interval training with total load duration of 7.5 min per session. A randomized controlled trial will be performed on two groups of healthy, sedentary male volunteers (n = 44). The study protocol will include 24 exercise sessions, three times a week, including aerobic training on a treadmill and strength training exercises. The intervention group will perform 15 bouts of 30 s, each at an intensity between 90 % and 95 % of maximal heart rate. The control group will complete 40 min of continuous exercise, ranging between 65 % and 75 % of maximal heart rate. The primary outcome measure to be evaluated will be maximal oxygen uptake (VO2max), and systolic and diastolic blood pressure will be evaluated as secondary outcome measures. Waist circumference, body mass index, and body composition will also be evaluated. Epidemiological evidence shows the link between VO2max and its association with chronic conditions that trigger CVD. Therefore, finding ways to improve VO2max and reduce blood pressure it is of vital importance to public health. NCT02288403 . Registered on 4 November 2014.

Epidemiology of hookworm (Uncinaria sanguinis) infection in free-ranging Australian sea lion (Neophoca cinerea) pups.

PubMed

Marcus, Alan D; Higgins, Damien P; Gray, Rachael

2014-09-01

Understanding the fundamental factors influencing the epidemiology of wildlife disease is essential to determining the impact of disease on individual health and population dynamics. The host-pathogen-environment relationship of the endangered Australian sea lion (Neophoca cinerea) and the parasitic hookworm, Uncinaria sanguinis, was investigated in neonatal pups during summer and winter breeding seasons at two biogeographically disparate colonies in South Australia. The endemic occurrence of hookworm infection in Australian sea lion pups at these sites was 100% and post-parturient transmammary transmission is likely the predominant route of hookworm infection for pups. The prepatent period for U. sanguinis in Australian sea lion pups was determined to be 11-14 days and the duration of infection approximately 2-3 months. The mean hookworm infection intensity in pups found dead was 2138 ± 552 (n = 86), but a significant relationship between infection intensity and faecal egg count was not identified; infection intensity in live pups could not be estimated from faecal samples. Fluctuations in infection intensity corresponded to oscillations in the magnitude of colony pup mortality, that is, higher infection intensity was significantly associated with higher colony pup mortality and reduced pup body condition. The dynamic interaction between colony, season, and host behaviour is hypothesised to modulate hookworm infection intensity in this species. This study provides a new perspective to understanding the dynamics of otariid hookworm infection and provides evidence that U. sanguinis is a significant agent of disease in Australian sea lion pups and could play a role in population regulation in this species.

Evaluation of proposed casemix criteria as a basis for costing patients in the adult general intensive care unit.

PubMed

Stevens, V G; Hibbert, C L; Edbrooke, D L

1998-10-01

This study analyses the relationship between the actual patient-related costs of care calculated for 145 patients admitted sequentially to an adult general intensive care unit and a number of factors obtained from a previously described consensus of opinion study. The factors identified in the study were suggested as potential descriptors for the casemix in an intensive care unit that could be used to predict the costs of care. Significant correlations between the costs of care and severity of illness, workload and length of stay were found but these failed to predict the costs of care with sufficient accuracy to be used in isolation to define isoresource groups in the intensive care unit. No associations between intensive care unit mortality, reason for admission and intensive and unit treatments and costs of care were found. Based on these results, it seems that casemix descriptors and isoresource groups for the intensive care unit that would allow costs to be predicted cannot be defined in terms of single factors.

Time-of-day effects on voice range profile performance in young, vocally untrained adult females.

PubMed

van Mersbergen, M R; Verdolini, K; Titze, I R

1999-12-01

Time-of-day effects on voice range profile performance were investigated in 20 vocally healthy untrained women between the ages of 18 and 35 years. Each subject produced two complete voice range profiles: one in the morning and one in the evening, about 36 hours apart. The order of morning and evening trials was counterbalanced across subjects. Dependent variables were (1) average minimum and average maximum intensity, (2) Voice range profile area and (3) center of gravity (median semitone pitch and median intensity). In this study, the results failed to reveal any clear evidence of time-of-day effects on voice range profile performance, for any of the dependent variables. However, a reliable interaction of time-of-day and trial order was obtained for average minimum intensity. Investigation of other subject populations, in particular trained vocalists or those with laryngeal lesions, is required for any generalization of the results.

Physical activity and selected cardiovascular risk factors in middle-aged male personnel of self-defense forces.

PubMed

Sakuta, Hidenari; Suzuki, Takashi

2006-01-01

We cross-sectionally analyzed the association between duration of physical activity and the presence of selected cardiovascular risk factors in the middle-aged male personnel of the Self-Defense Forces who underwent retirement check-up (n = 974). In a univariate regression analysis, duration of high intensity physical activity but not that of moderate or low intensity physical activity inversely correlated with body mass index (BMI), triglyceride, fasting plasma glucose, white blood cell (WBC) count and systolic blood pressure. No intensity categories of physical activity correlated with total cholesterol. In a multivariate logistic regression analysis adjusted for lifestyle factors and the rank, the odds ratio per 1 h/wk increase in high intensity physical activity was .88 (95% confidence interval (CI) .80-.97; P=.007) for the presence of obesity (BMI 25.0 kg/m2), .88 (95% CI .81-.95; P = .002) for hypertrigly ceridemia, .87 (95% CI .76-.99; P=.034) for type 2 diabetes, and .90 (95% CI .82-.99; P=.037) for hypertension. Neither hypercholesterolemia nor high WBC count (> or = 6,900/microl) was associated with high intensity physical activity. High intensity physical activity inversely correlated with traditional cardiovascular risk factors in the middle-aged men.

Cadence (steps/min) and intensity during ambulation in 6-20 year olds: the CADENCE-kids study.

PubMed

Tudor-Locke, Catrine; Schuna, John M; Han, Ho; Aguiar, Elroy J; Larrivee, Sandra; Hsia, Daniel S; Ducharme, Scott W; Barreira, Tiago V; Johnson, William D

2018-02-26

Steps/day is widely utilized to estimate the total volume of ambulatory activity, but it does not directly reflect intensity, a central tenet of public health guidelines. Cadence (steps/min) represents an overlooked opportunity to describe the intensity of ambulatory activity. We sought to establish thresholds linking directly observed cadence with objectively measured intensity in 6-20 year olds. One hundred twenty participants completed multiple 5-min bouts on a treadmill, from 13.4 m/min (0.80 km/h) to 134.0 m/min (8.04 km/h). The protocol was terminated when participants naturally transitioned to running, or if they chose to not continue. Steps were visually counted and intensity was objectively measured using a portable metabolic system. Youth metabolic equivalents (METy) were calculated for 6-17 year olds, with moderate intensity defined as ≥4 and < 6 METy, and vigorous intensity as ≥6 METy. Traditional METs were calculated for 18-20 year olds, with moderate intensity defined as ≥3 and < 6 METs, and vigorous intensity defined as ≥6 METs. Optimal cadence thresholds for moderate and vigorous intensity were identified using segmented random coefficients models and receiver operating characteristic (ROC) curves. Participants were on average (± SD) aged 13.1 ± 4.3 years, weighed 55.8 ± 22.3 kg, and had a BMI z-score of 0.58 ± 1.21. Moderate intensity thresholds (from regression and ROC analyses) ranged from 128.4 steps/min among 6-8 year olds to 87.3 steps/min among 18-20 year olds. Comparable values for vigorous intensity ranged from 157.7 steps/min among 6-8 year olds to 119.3 steps/min among 18-20 year olds. Considering both regression and ROC approaches, heuristic cadence thresholds (i.e., evidence-based, practical, rounded) ranged from 125 to 90 steps/min for moderate intensity, and 155 to 125 steps/min for vigorous intensity, with higher cadences for younger age groups. Sensitivities and specificities for these heuristic thresholds ranged from 77.8 to 99.0%, indicating fair to excellent classification accuracy. These heuristic cadence thresholds may be used to prescribe physical activity intensity in public health recommendations. In the research and clinical context, these heuristic cadence thresholds have apparent value for accelerometer-based analytical approaches to determine the intensity of ambulatory activity.

Strength evaluation of butt joint by stress intensity factor of small edge crack near interface edge

NASA Astrophysics Data System (ADS)

Sato, T.; Oda, K.; Tsutsumi, N.

2018-06-01

Failure of the bonded dissimilar materials generally initiates near the interface, or just from the interface edge due to the stress singularity at the interface edge. In this study, the stress intensity factor of an edge crack close to the interface between the dissimilar materials is analyzed. The small edge crack is strongly dominated by the singular stress field near the interface edge. The analysis of stress intensity factor of small edge crack near the interface in bi-material and butt joint plates is carried out by changing the length and the location of the crack and the region dominated by the interface edge is examined. It is found that the dimensionless stress intensity factor of small crack, normalized by the singular stress at the crack tip point in the bonded plate without the crack, is equal to 1.12, independent of the material combination and adhesive layer thickness, when the relative crack length with respect to the crack location is less than 0.01. The adhesive strength of the bonded plate with various adhesive layer thicknesses can be expressed as the constant critical stress intensity factor of the small edge crack.

Analysis and compensation for the effect of the catheter position on image intensities in intravascular optical coherence tomography

NASA Astrophysics Data System (ADS)

Liu, Shengnan; Eggermont, Jeroen; Wolterbeek, Ron; Broersen, Alexander; Busk, Carol A. G. R.; Precht, Helle; Lelieveldt, Boudewijn P. F.; Dijkstra, Jouke

2016-12-01

Intravascular optical coherence tomography (IVOCT) is an imaging technique that is used to analyze the underlying cause of cardiovascular disease. Because a catheter is used during imaging, the intensities can be affected by the catheter position. This work aims to analyze the effect of the catheter position on IVOCT image intensities and to propose a compensation method to minimize this effect in order to improve the visualization and the automatic analysis of IVOCT images. The effect of catheter position is modeled with respect to the distance between the catheter and the arterial wall (distance-dependent factor) and the incident angle onto the arterial wall (angle-dependent factor). A light transmission model incorporating both factors is introduced. On the basis of this model, the interaction effect of both factors is estimated with a hierarchical multivariant linear regression model. Statistical analysis shows that IVOCT intensities are significantly affected by both factors with p<0.001, as either aspect increases the intensity decreases. This effect differs for different pullbacks. The regression results were used to compensate for this effect. Experiments show that the proposed compensation method can improve the performance of the automatic bioresorbable vascular scaffold strut detection.

Effect of debond growth on stress-intensity factors in a cracked orthotropic sheet stiffened by a semi-infinite orthotropic sheet

NASA Technical Reports Server (NTRS)

Bigelow, C. A.

1986-01-01

Stress-intensity factors are determined for a cracked infinite sheet adhesively bonded to a stringer, and debonding of the adhesive layer is predicted. The stringer is modeled as a semi-infinite sheet. Adhesive nonlinearity is also included. Both the sheet and stringer are treated as homogeneous, orthotropic materials. A set of integral equations is formulated and solved to obtain the adhesive shear stresses and crack-tip stress-intensity factors. Adhesive debonding is predicted using a rupture criterion based on the combined adhesive stresses. When the crack is not under the stringer, the debond extends along the edge of the stringer. When the crack tip is beneath the stringer, the debond grows to the end of the crack, then along the edge of the stringer. Stress levels required for debond initiation decrease as the crack tip is moved beneath the stringer. With a nonlinear adhesive, the debond initiates at higher applied stress levels than in linear adhesive cases. Compared with the linear adhesive solution, modeling a nonlinear adhesive causes the stress-intensity factor to increase when the bond is assumed to remain intact but causes the stress-intensity factor to decrease when debonding is included.

The influence of fundamental frequency on perceived duration in spectrally comparable sounds

PubMed Central

Aalto, Daniel; Simko, Juraj; Vainio, Martti

2017-01-01

The perceived duration of a sound is affected by its fundamental frequency and intensity: higher sounds are judged to be longer, as are sounds with greater intensity. Since increasing intensity lengthens the perceived duration of the auditory object, and increasing the fundamental frequency increases the sound’s perceived loudness (up to ca. 3 kHz), frequency modulation of duration could be potentially explained by a confounding effect where the primary cause of the modulation would be variations in intensity. Here, a series of experiments are described that were designed to disentangle the contributions of fundamental frequency, intensity, and duration to perceived loudness and duration. In two forced-choice tasks, participants judged duration and intensity differences between two sounds varying simultaneously in intensity, fundamental frequency, fundamental frequency gliding range, and duration. The results suggest that fundamental frequency and intensity each have an impact on duration judgments, while frequency gliding range did not influence the present results. We also demonstrate that the modulation of perceived duration by sound fundamental frequency cannot be fully explained by the confounding relationship between frequency and intensity. PMID:28879063

The influence of fundamental frequency on perceived duration in spectrally comparable sounds.

PubMed

Dawson, Caitlin; Aalto, Daniel; Simko, Juraj; Vainio, Martti

2017-01-01

The perceived duration of a sound is affected by its fundamental frequency and intensity: higher sounds are judged to be longer, as are sounds with greater intensity. Since increasing intensity lengthens the perceived duration of the auditory object, and increasing the fundamental frequency increases the sound's perceived loudness (up to ca. 3 kHz), frequency modulation of duration could be potentially explained by a confounding effect where the primary cause of the modulation would be variations in intensity. Here, a series of experiments are described that were designed to disentangle the contributions of fundamental frequency, intensity, and duration to perceived loudness and duration. In two forced-choice tasks, participants judged duration and intensity differences between two sounds varying simultaneously in intensity, fundamental frequency, fundamental frequency gliding range, and duration. The results suggest that fundamental frequency and intensity each have an impact on duration judgments, while frequency gliding range did not influence the present results. We also demonstrate that the modulation of perceived duration by sound fundamental frequency cannot be fully explained by the confounding relationship between frequency and intensity.

Impact of thermal radiation on MHD slip flow of a ferrofluid over a non-isothermal wedge

NASA Astrophysics Data System (ADS)

Rashad, A. M.

2017-01-01

This article is concerned with the problem of magnetohydrodynamic (MHD) mixed convection flow of Cobalt-kerosene ferrofluid adjacent a non-isothermal wedge under the influence of thermal radiation and partial slip. Such type of problems are posed by electric generators and biomedical enforcement. The governing equations are solved using the Thomas algorithm with finite-difference type and solutions for a wide range of magnet parameter are presented. It is found that local Nusselt number manifests a considerable diminishing for magnetic parameter and magnifies intensively in case of slip factor, thermal radiation and surface temperature parameters. Further, the skin friction coefficient visualizes a sufficient enhancement for the parameters thermal radiation, surface temperature and magnetic field, but a huge reduction is recorded by promoting the slip factor.

Effectiveness of a motivational interviewing intervention on weight loss, physical activity and cardiovascular disease risk factors: a randomised controlled trial with a 12-month post-intervention follow-up.

PubMed

Hardcastle, Sarah J; Taylor, Adrian H; Bailey, Martin P; Harley, Robert A; Hagger, Martin S

2013-03-28

Intensive diet and physical activity interventions have been found to reduce cardiovascular disease (CVD) risk, but are resource intensive. The American Heart Association recently recommended motivational interviewing (MI) as an effective approach for low-intensity interventions to promote health-related outcomes such as weight loss. However, there is limited research evaluating the long-term effectiveness of MI-based interventions on health-related outcomes associated with CVD risk. The current research evaluated the effectiveness of a six-month low-intensity MI intervention in a UK primary-care setting in maintaining reductions in CVD risk factors at12 months post-intervention. Primary-care patients were randomised to an intervention group that received standard exercise and nutrition information plus up to five face-to-face MI sessions, delivered by a physical activity specialist and registered dietician over a 6-month period, or to a minimal intervention comparison group that received the standard information only. Follow-up measures of behavioural (vigorous and moderate physical activity, walking, physical activity stage-of-change, fruit and vegetable intake, and dietary fat intake) and biomedical (weight, body mass index [BMI], blood pressure, cholesterol) outcomes were taken immediately post-intervention and at a 12-month follow-up occasion. Intent-to-treat analyses revealed significant differences between groups for walking and cholesterol. Obese and hypercholesterolemic patients at baseline exhibited significant improvements in BMI and cholesterol respectively among those allocated to the intervention group compared to the comparison group. Post-intervention improvements in other health-related outcomes including blood pressure, weight, and BMI were not maintained. The present study suggests that a low-intensity MI counselling intervention is effective in bringing about long-term changes in some, but not all, health-related outcomes (walking, cholesterol levels) associated with CVD risk. The intervention was particularly effective for patients with elevated levels of CVD risk factors at baseline. Based on these findings future interventions should be conducted in a primary care setting and target patients with high risk of CVD. Future research should investigate how the long-term gains in health-related outcomes brought about by the MI-counselling intervention in the current study could be extended to a wider range of health outcomes.

FusionArc optimization: a hybrid volumetric modulated arc therapy (VMAT) and intensity modulated radiation therapy (IMRT) planning strategy.

PubMed

Matuszak, Martha M; Steers, Jennifer M; Long, Troy; McShan, Daniel L; Fraass, Benedick A; Romeijn, H Edwin; Ten Haken, Randall K

2013-07-01

To introduce a hybrid volumetric modulated arc therapy/intensity modulated radiation therapy (VMAT/IMRT) optimization strategy called FusionArc that combines the delivery efficiency of single-arc VMAT with the potentially desirable intensity modulation possible with IMRT. A beamlet-based inverse planning system was enhanced to combine the advantages of VMAT and IMRT into one comprehensive technique. In the hybrid strategy, baseline single-arc VMAT plans are optimized and then the current cost function gradients with respect to the beamlets are used to define a metric for predicting which beam angles would benefit from further intensity modulation. Beams with the highest metric values (called the gradient factor) are converted from VMAT apertures to IMRT fluence, and the optimization proceeds with the mixed variable set until convergence or until additional beams are selected for conversion. One phantom and two clinical cases were used to validate the gradient factor and characterize the FusionArc strategy. Comparisons were made between standard IMRT, single-arc VMAT, and FusionArc plans with one to five IMRT∕hybrid beams. The gradient factor was found to be highly predictive of the VMAT angles that would benefit plan quality the most from beam modulation. Over the three cases studied, a FusionArc plan with three converted beams achieved superior dosimetric quality with reductions in final cost ranging from 26.4% to 48.1% compared to single-arc VMAT. Additionally, the three beam FusionArc plans required 22.4%-43.7% fewer MU∕Gy than a seven beam IMRT plan. While the FusionArc plans with five converted beams offer larger reductions in final cost--32.9%-55.2% compared to single-arc VMAT--the decrease in MU∕Gy compared to IMRT was noticeably smaller at 12.2%-18.5%, when compared to IMRT. A hybrid VMAT∕IMRT strategy was implemented to find a high quality compromise between gantry-angle and intensity-based degrees of freedom. This optimization method will allow patients to be simultaneously planned for dosimetric quality and delivery efficiency without switching between delivery techniques. Example phantom and clinical cases suggest that the conversion of only three VMAT segments to modulated beams may result in a good combination of quality and efficiency.

Growth characteristics of a plane crack subjected to three-dimensional loading. [based on stress intensity factors

NASA Technical Reports Server (NTRS)

Hartranft, R. J.; Sih, G. C.

1973-01-01

The closed form expressions for the stress intensity factors due to concentrated forces applied to the surfaces of a half plane crack in an infinite body are used to generate solutions for distributed loads in this geometry. The stress intensity factors for uniformly distributed loads applied over a rectangular portion of the crack surface are given in closed form. An example of non-uniformly distributed loads which can be treated numerically is also included. In particular, combinations of normal and shear stresses on the crack which simulate the case of loading at an angle to the crack front are considered. The resulting stress intensity factors are combined with the strain energy density fracture criterion for the purpose of predicting the most likely direction of crack propagation. The critical value of the energy density factor can then be used for determining the allowable load on a specimen with a crack front not perpendicular to the tensile axis.

Imaging monitored loosening of dense fibrous tissues using high-intensity pulsed ultrasound

NASA Astrophysics Data System (ADS)

Yeh, Chia-Lun; Li, Pai-Chi; Shih, Wen-Pin; Huang, Pei-Shin; Kuo, Po-Ling

2013-10-01

Pulsed high-intensity focused ultrasound (HIFU) is proposed as a new alternative treatment for contracture of dense fibrous tissue. It is hypothesized that the pulsed-HIFU can release the contracted tissues by attenuating tensile stiffness along the fiber axis, and that the stiffness reduction can be quantitatively monitored by change of B-mode images. Fresh porcine tendons and ligaments were adapted to an ex vivo model and insonated with pulsed-HIFU for durations ranging from 5 to 30 min. The pulse length was 91 µs with a repetition frequency of 500 Hz, and the peak rarefactional pressure was 6.36 MPa. The corresponding average intensities were kept around 1606 W cm-2 for ISPPA and 72.3 W cm-2 for ISPTA. B-mode images of the tissues were acquired before and after pulsed-HIFU exposure, and the changes in speckle intensity and organization were analyzed. The tensile stiffness of the HIFU-exposed tissues along the longitudinal axis was examined using a stretching machine. Histology examinations were performed by optical and transmission electron microscopy. Pulsed-HIFU exposure significantly decreased the tensile stiffness of the ligaments and tendons. The intensity and organization of tissue speckles in the exposed region were also decreased. The speckle changes correlated well with the degree of stiffness alteration. Histology examinations revealed that pulsed-HIFU exposure probably damages tissues via a cavitation-mediated mechanism. Our results suggest that pulsed-HIFU with a low duty factor is a promising tool for developing new treatment strategies for orthopedic disorders.

Inward diffusion and loss of radiation belt protons

NASA Astrophysics Data System (ADS)

Selesnick, R. S.; Baker, D. N.; Jaynes, A. N.; Li, X.; Kanekal, S. G.; Hudson, M. K.; Kress, B. T.

2016-03-01

Radiation belt protons in the kinetic energy range 24 to 76 MeV are being measured by the Relativistic Electron Proton Telescope on each of the two Van Allen Probes. Data have been processed for the purpose of studying variability in the trapped proton intensity during October 2013 to August 2015. For the lower energies (≲32 MeV), equatorial proton intensity near L = 2 showed a steady increase that is consistent with inward diffusion of trapped solar protons, as shown by positive radial gradients in phase space density at fixed values of the first two adiabatic invariants. It is postulated that these protons were trapped with enhanced efficiency during the 7 March 2012 solar proton event. A model that includes radial diffusion, along with known trapped proton source and loss processes, shows that the observed average rate of increase near L = 2 is predicted by the same model diffusion coefficient that is required to form the entire proton radiation belt, down to low L, over an extended (˜103 year) interval. A slower intensity decrease for lower energies near L = 1.5 may also be caused by inward diffusion, though it is faster than predicted by the model. Higher-energy (≳40 MeV) protons near the L = 1.5 intensity maximum are from cosmic ray albedo neutron decay. Their observed intensity is lower than expected by a factor ˜2, but the discrepancy is resolved by adding an unspecified loss process to the model with a mean lifetime ˜120 years.

Bumblebees Perform Well-Controlled Landings in Dim Light.

PubMed

Reber, Therese; Dacke, Marie; Warrant, Eric; Baird, Emily

2016-01-01

To make a smooth touchdown when landing, an insect must be able to reliably control its approach speed as well as its body and leg position-behaviors that are thought to be regulated primarily by visual information. Bumblebees forage and land under a broad range of light intensities and while their behavior during the final moments of landing has been described in detail in bright light, little is known about how this is affected by decreasing light intensity. Here, we investigate this by characterizing the performance of bumblebees, B. terrestris, landing on a flat platform at two different orientations (horizontal and vertical) and at four different light intensities (ranging from 600 lx down to 19 lx). As light intensity decreased, the bees modified their body position and the distance at which they extended their legs, suggesting that the control of landing in these insects is visually mediated. Nevertheless, the effect of light intensity was small and the landings were still well controlled, even in the dimmest light. We suggest that the changes in landing behavior that occurred in dim light might represent adaptations that allow the bees to perform smooth landings across the broad range of light intensities at which they are active.

Measured electric field intensities near electric cloud discharges detected by the Kennedy Space Center's Lightning Detection and Ranging System, LDAR

NASA Technical Reports Server (NTRS)

Poehler, H. A.

1977-01-01

For a summer thunderstorm, for which simultaneous, airborne electric field measurements and Lightning Detection and Ranging (LDAR) System data was available, measurements were coordinated to present a picture of the electric field intensity near cloud electrical discharges detected by the LDAR System. Radar precipitation echos from NOAA's 10 cm weather radar and measured airborne electric field intensities were superimposed on LDAR PPI plots to present a coordinated data picture of thunderstorm activity.

Light pollution is greatest within migration passage areas for nocturnally-migrating birds around the world.

PubMed

Cabrera-Cruz, Sergio A; Smolinsky, Jaclyn A; Buler, Jeffrey J

2018-02-19

Excessive or misdirected artificial light at night (ALAN) produces light pollution that influences several aspects of the biology and ecology of birds, including disruption of circadian rhythms and disorientation during flight. Many migrating birds traverse large expanses of land twice every year at night when ALAN illuminates the sky. Considering the extensive and increasing encroachment of light pollution around the world, we evaluated the association of the annual mean ALAN intensity over land within the geographic ranges of 298 nocturnally migrating bird species with five factors: phase of annual cycle, mean distance between breeding and non-breeding ranges, range size, global hemisphere of range, and IUCN category of conservation concern. Light pollution within geographic ranges was relatively greater during the migration season, for shorter-distance migrants, for species with smaller ranges, and for species in the western hemisphere. Our results suggest that migratory birds may be subject to the effects of light pollution particularly during migration, the most critical stage in their annual cycle. We hope these results will spur further research on how light pollution affects not only migrating birds, but also other highly mobile animals throughout their annual cycle.

A conceptual model of physician work intensity: guidance for evaluating policies and practices to improve health care delivery.

PubMed

Horner, Ronnie D; Matthews, Gerald; Yi, Michael S

2012-08-01

Physician work intensity, although a major factor in determining the payment for medical services, may potentially affect patient health outcomes including quality of care and patient safety, and has implications for the redesign of medical practice to improve health care delivery. However, to date, there has been minimal research regarding the relationship between physician work intensity and either patient outcomes or the organization and management of medical practices. A theoretical model on physician work intensity will provide useful guidance to such inquiries. To describe an initial conceptual model to facilitate further investigations of physician work intensity. A conceptual model of physician work intensity is described using as its theoretical base human performance science relating to work intensity. For each of the theoretical components, we present relevant empirical evidence derived from a review of the current literature. The proposed model specifies that the level of work intensity experienced by a physician is a consequence of the physician performing the set of tasks (ie, demands) relating to a medical service. It is conceptualized that each medical service has an inherent level of intensity that is experienced by a physician as a function of factors relating to the physician, patient, and medical practice environment. The proposed conceptual model provides guidance to researchers as to the factors to consider in studies of how physician work intensity impacts patient health outcomes and how work intensity may be affected by proposed policies and approaches to health care delivery.

High-Intensity Locomotor Exercise Increases Brain-Derived Neurotrophic Factor in Individuals with Incomplete Spinal Cord Injury.

PubMed

Leech, Kristan A; Hornby, T George

2017-03-15

High-intensity locomotor exercise is suggested to contribute to improved recovery of locomotor function after neurological injury. This may be secondary to exercise-intensity-dependent increases in neurotrophin expression demonstrated previously in control subjects. However, rigorous examination of intensity-dependent changes in neurotrophin levels is lacking in individuals with motor incomplete spinal cord injury (SCI). Therefore, the primary aim of this study was to evaluate the effect of locomotor exercise intensity on peripheral levels of brain-derived neurotrophic factor (BDNF) in individuals with incomplete SCI. We also explored the impact of the Val66Met single-nucleotide polymorphism (SNP) on the BDNF gene on intensity-dependent changes. Serum concentrations of BDNF and insulin-like growth factor-1 (IGF-1), as well as measures of cardiorespiratory dynamics, were evaluated across different levels of exercise intensity achieved during a graded-intensity, locomotor exercise paradigm in 11 individuals with incomplete SCI. Our results demonstrate a significant increase in serum BDNF at high, as compared to moderate, exercise intensities (p = 0.01) and 15 and 30 min post-exercise (p < 0.01 for both), with comparison to changes at low intensity approaching significance (p = 0.05). Serum IGF-1 demonstrated no intensity-dependent changes. Significant correlations were observed between changes in BDNF and specific indicators of exercise intensity (e.g., rating of perceived exertion; R = 0.43; p = 0.02). Additionally, the data suggest that Val66Met SNP carriers may not exhibit intensity-dependent changes in serum BDNF concentration. Given the known role of BDNF in experience-dependent neuroplasticity, these preliminary results suggest that exercise intensity modulates serum BDNF concentrations and may be an important parameter of physical rehabilitation interventions after neurological injury.

Accurate B-spline-based 3-D interpolation scheme for digital volume correlation

NASA Astrophysics Data System (ADS)

Ren, Maodong; Liang, Jin; Wei, Bin

2016-12-01

An accurate and efficient 3-D interpolation scheme, based on sampling theorem and Fourier transform technique, is proposed to reduce the sub-voxel matching error caused by intensity interpolation bias in digital volume correlation. First, the influence factors of the interpolation bias are investigated theoretically using the transfer function of an interpolation filter (henceforth filter) in the Fourier domain. A law that the positional error of a filter can be expressed as a function of fractional position and wave number is found. Then, considering the above factors, an optimized B-spline-based recursive filter, combining B-spline transforms and least squares optimization method, is designed to virtually eliminate the interpolation bias in the process of sub-voxel matching. Besides, given each volumetric image containing different wave number ranges, a Gaussian weighting function is constructed to emphasize or suppress certain of wave number ranges based on the Fourier spectrum analysis. Finally, a novel software is developed and series of validation experiments were carried out to verify the proposed scheme. Experimental results show that the proposed scheme can reduce the interpolation bias to an acceptable level.

Factors Associated With Mortality in Low-Risk Pediatric Critical Care Patients in The Netherlands.

PubMed

Verlaat, Carin W; Visser, Idse H; Wubben, Nina; Hazelzet, Jan A; Lemson, Joris; van Waardenburg, Dick; van der Heide, Douwe; van Dam, Nicolette A; Jansen, Nicolaas J; van Heerde, Mark; van der Starre, Cynthia; van Asperen, Roelie; Kneyber, Martin; van Woensel, Job B; van den Boogaard, Mark; van der Hoeven, Johannes

2017-04-01

To determine differences between survivors and nonsurvivors and factors associated with mortality in pediatric intensive care patients with low risk of mortality. Retrospective cohort study. Patients were selected from a national database including all admissions to the PICUs in The Netherlands between 2006 and 2012. Patients less than 18 years old admitted to the PICU with a predicted mortality risk lower than 1% according to either the recalibrated Pediatric Risk of Mortality or the Pediatric Index of Mortality 2 were included. None. In total, 16,874 low-risk admissions were included of which 86 patients (0.5%) died. Nonsurvivors had more unplanned admissions (74.4% vs 38.5%; p < 0.001), had more complex chronic conditions (76.7% vs 58.8%; p = 0.001), were more often mechanically ventilated (88.1% vs 34.9%; p < 0.001), and had a longer length of stay (median, 11 [interquartile range, 5-32] d vs median, 3 [interquartile range, 2-5] d; p < 0.001) when compared with survivors. Factors significantly associated with mortality were complex chronic conditions (odds ratio, 3.29; 95% CI, 1.97-5.50), unplanned admissions (odds ratio, 5.78; 95% CI, 3.40-9.81), and admissions in spring/summer (odds ratio, 1.67; 95% CI, 1.08-2.58). Nonsurvivors in the PICU with a low predicted mortality risk have recognizable risk factors including complex chronic condition and unplanned admissions.

Fracture study of windshield glass panes

NASA Technical Reports Server (NTRS)

Yeh, H. Y.

1987-01-01

The major stresses which cause crack propagation in windshield glass panes are induced by bending moments which result from the pressure differentials across the panes. Hence the stress intensity factors for the finite plate with the semi-elliptical surface flaw and edge crack under the bending moments are examined. The results show that the crack growth will be upperbound if it is computed by using the stress intensity factor for the finite plate with the edge crack subjected to pure bending moments. Furthermore, if the ratio of crack depth to plate thickness, a/t, is within 0.3, the stress intensity factor can be conservatively assumed to be constant at the value of a/t equal to zero. A simplified equation to predict the structural life of glass panes is derived based on constant stress intensity factor. The accuracy of structural life is mainly dependent on how close the empirical parameter, m, can be estimated.

A theory for the fracture of thin plates subjected to bending and twisting moments

NASA Technical Reports Server (NTRS)

Hui, C. Y.; Zehnder, Alan T.

1993-01-01

Stress fields near the tip of a through crack in an elastic plate under bending and twisting moments are reviewed assuming both Kirchhoff and Reissner plate theories. The crack tip displacement and rotation fields based on the Reissner theory are calculated. These results are used to calculate the J-integral (energy release rate) for both Kirchhoff and Reissner plate theories. Invoking Simmonds and Duva's (1981) result that the value of the J-integral based on either theory is the same for thin plates, a universal relationship between the Kirchhoff theory stress intensity factors and the Reissner theory stress intensity factors is obtained for thin plates. Calculation of Kirchhoff theory stress intensity factors from finite elements based on energy release rate is illustrated. It is proposed that, for thin plates, fracture toughness and crack growth rates be correlated with the Kirchhoff theory stress intensity factors.

Key ingredients for implementing intensive outpatient programs within patient-centered medical homes: A literature review and qualitative analysis.

PubMed

Breland, Jessica Y; Asch, Steven M; Slightam, Cindie; Wong, Ava; Zulman, Donna M

2016-03-01

Intensive outpatient programs aim to transform care while conserving resources for high-need, high-cost patients, but little is known about factors that influence their implementation within patient-centered medical homes (PCMHs). In this mixed-methods study, we reviewed the literature to identify factors affecting intensive outpatient program implementation, then used semi-structured interviews to determine how these factors influenced the implementation of an intensive outpatient program within the Veterans Affairs' (VA) PCMH. Interviewees included facility leadership and clinical staff who were involved in a pilot Intensive Management Patient Aligned Care Team (ImPACT) intervention for high-need, high-cost VA PCMH patents. We classified implementation factors in the literature review and qualitative analysis using the Consolidated Framework for Implementation Research (CFIR). The literature review (n=9 studies) and analyses of interviews (n=15) revealed key implementation factors in three CFIR domains. First, the Inner Setting (i.e., the organizational and PCMH environment), mostly enabled implementation through a culture of innovation, good networks and communication, and positive tension for change. Second, Characteristics of Individuals, including creativity, flexibility, and interpersonal skills, allowed program staff to augment existing PCMH services. Finally, certain Intervention Characteristics (e.g., adaptability) enabled implementation, while others (e.g., complexity) generated implementation barriers. Resources and structural features common to PCMHs can facilitate implementation of intensive outpatient programs, but program success is also dependent on staff creativity and flexibility, and intervention adaptations to meet patient and organizational needs. Established PCMHs likely provide resources and environments that permit accelerated implementation of intensive outpatient programs. V. Published by Elsevier Inc.

Neonatal Intensive Care Unit Nurses Working in an Open Ward: Stress and Work Satisfaction.

PubMed

Lavoie-Tremblay, Mélanie; Feeley, Nancy; Lavigne, Geneviève L; Genest, Christine; Robins, Stéphanie; Fréchette, Julie

2016-01-01

There is some research on the impact of open-ward unit design on the health of babies and the stress experienced by parents and nurses in neonatal intensive care units. However, few studies have explored the factors associated with nurse stress and work satisfaction among nurses practicing in open-ward neonatal intensive care units. The purpose of this study was to examine what factors are associated with nurse stress and work satisfaction among nurses practicing in an open-ward neonatal intensive care unit. A cross-sectional correlational design was used in this study. Participants were nurses employed in a 34-bed open-ward neonatal intensive care unit in a major university-affiliated hospital in Montréal, Quebec, Canada. A total of 94 nurses were eligible, and 86 completed questionnaires (91% response rate). Descriptive statistics were computed to describe the participants' characteristics. To identify factors associated with nurse stress and work satisfaction, correlational analysis and multiple regression analyses were performed with the Nurse Stress Scale and the Global Work Satisfaction scores as the dependent variables. Different factors predict neonatal intensive care unit nurses' stress and job satisfaction, including support, family-centered care, performance obstacles, work schedule, education, and employment status. In order to provide neonatal intensive care units nurses with a supportive environment, managers can provide direct social support to nurses and influence the culture around teamwork.

Solar Power for Near Sun, High-Temperature Missions

NASA Technical Reports Server (NTRS)

Landis, Geoffrey A.

2008-01-01

Existing solar cells lose performance at the high temperatures encountered in Mercury orbit and inward toward the sun. For future missions designed to probe environments close to the sun, it is desirable to develop array technologies for high temperature and high light intensity. Approaches to solar array design for near-sun missions include modifying the terms governing temperature of the cell and the efficiency at elevated temperature, or use of techniques to reduce the incident solar energy to limit operating temperature. An additional problem is found in missions that involve a range of intensities, such as the Solar Probe + mission, which ranges from a starting distance of 1 AU from the sun to a minimum distance of 9.5 solar radii, or 0.044 AU. During the mission, the solar intensity ranges from one to about 500 times AM0. This requires a power system to operate over nearly three orders of magnitude of incident intensity.

Effect of Habitat Conditions and Plant Traits on Leaf Damage in the Carduoideae Subfamily

PubMed Central

Münzbergová, Zuzana; Skuhrovec, Jiří

2013-01-01

Plant traits are the key factors that determine herbivore foraging selection. The traits serving as defense traits against herbivores represent a wide range of traits, such as chemical, physiological, morphological and life-history traits. While many studies considered plant defense traits at the within-species scale, much less is known from comparisons of a wide range of closely related species. The aim of this study was to identify factors responsible for the intensity of leaf damage in the Carduoideae subfamily of Asteraceae, which hosts many invasive species and thus is potential candidate plant species that could be controlled by biological control. Specifically, we wanted to see the relative importance of habitat characteristics, plant size and plants traits in determining the degree of folivory. The study identified several defense traits able to explain differences in herbivory between species after accounting for differences in the habitats in which the species occur and the plant size. Specifically, the most important traits were traits related to the quality of the leaf tissue expressed as the content of phosphorus, water and specific leaf area, which suggests that the leaf quality had a more important effect on the degree of herbivory than the presence of specific defense mechanisms such as spines and hair. Leaf quality is thus a candidate factor that drives herbivore choice when selecting which plant to feed on and should be considered when assessing the danger that a herbivore will switch hosts when introduced to a new range. PMID:23717643

The Noisiness of Low Frequency Bands of Noise

NASA Technical Reports Server (NTRS)

Lawton, B. W.

1975-01-01

The relative noisiness of low frequency 1/3-octave bands of noise was examined. The frequency range investigated was bounded by the bands centered at 25 and 200 Hz, with intensities ranging from 50 to 95 db (SPL). Thirty-two subjects used a method of adjustment technique, producing comparison band intensities as noisy as 100 and 200 Hz standard bands at 60 and 72 db. The work resulted in contours of equal noisiness for 1/3-octave bands, ranging in intensity from approximately 58 to 86 db (SPL). These contours were compared with the standard equal noisiness contours; in the region of overlap, between 50 and 200 Hz, the agreement was good.

Extended Study of Flaw Growth at Fastener Holes. Volume 1

DTIC Science & Technology

1978-04-01

itmude Ioodi n’i kv~~ ~ I S ; t 01 I IS 1 OF F IGLIR I’S (Contit d) SinNo.___ 30) \\Giolvth Bel ikio- of Ilntvi medi kte Tim, Citick ho 10U4 n1tei tei enc ...compress each other. The effective stress intensity factor range equals tile differ- ence between curves 2 and 3. For a similar plate with an open hole...intei fel ence or cold workinl, the crack growth rate, in general, is significantly lower than that of a straight reomed hole without preconditioning. (4

Structure of polyacrylic acid and polymethacrylic acid solutions : a small angle neutron scattering study

NASA Astrophysics Data System (ADS)

Moussaid, A.; Schosseler, F.; Munch, J. P.; Candau, S. J.

1993-04-01

The intensity scattered from polyacrylic acid and polymethacrylic acid solutions has been measured by small angle neutron scattering experiemnts. The influence of polymer concentration, ionization degree, temperature and salt content has been investigated. Results are in qualitative agreement with a model which predicts the existence of microphases in the unstable region of the phase diagram. Quantitative comparison with the theory is performed by fitting the theoretical structure factor to the experimental data. For a narrow range of ionizaiton degrees nearly quantitative agreement with the theory is found for the polyacrylic acide system.

Fatigue and fracture mechanical behavior for Chinese A508-3 steel at room temperature

NASA Astrophysics Data System (ADS)

Shi, K. K.; Xie, H.; Zheng, B.; Fu, X. L.

2018-06-01

Material, A508-3 steel, has been used in nuclear reactor vessels. In the present study, fatigue and fracture mechanical behavior of Chinese A5083 steel at room temperature are studied by mechanical material testing machine (MTS). Test data of material’s mechanical behavior including uniaxial tension, low cycle fatigue (LCF), threshold value of stress intensity factor (SIF) range, fatigue crack growth (FCG), and fracture toughness is generated and given for further study. It is worth noting that the model in predicting FCG of material from LCF parameters is verified and discussed.

The M-Integral for Computing Stress Intensity Factors in Generally Anisotropic Materials

NASA Technical Reports Server (NTRS)

Warzynek, P. A.; Carter, B. J.; Banks-Sills, L.

2005-01-01

The objective of this project is to develop and demonstrate a capability for computing stress intensity factors in generally anisotropic materials. These objectives have been met. The primary deliverable of this project is this report and the information it contains. In addition, we have delivered the source code for a subroutine that will compute stress intensity factors for anisotropic materials encoded in both the C and Python programming languages and made available a version of the FRANC3D program that incorporates this subroutine. Single crystal super alloys are commonly used for components in the hot sections of contemporary jet and rocket engines. Because these components have a uniform atomic lattice orientation throughout, they exhibit anisotropic material behavior. This means that stress intensity solutions developed for isotropic materials are not appropriate for the analysis of crack growth in these materials. Until now, a general numerical technique did not exist for computing stress intensity factors of cracks in anisotropic materials and cubic materials in particular. Such a capability was developed during the project and is described and demonstrated herein.

Design, development and validation of a new laryngo-pharyngeal endoscopic esthesiometer and range-finder based on the assessment of air-pulse variability determinants.

PubMed

Giraldo-Cadavid, Luis F; Agudelo-Otalora, Luis Mauricio; Burguete, Javier; Arbulu, Mario; Moscoso, William Daniel; Martínez, Fabio; Ortiz, Andrés Felipe; Diaz, Juan; Pantoja, Jaime A; Rueda-Arango, Andrés Felipe; Fernández, Secundino

2016-05-10

Laryngo-pharyngeal mechano-sensitivity (LPMS) is involved in dysphagia, sleep apnea, stroke, irritable larynx syndrome and cough hypersensitivity syndrome among other disorders. These conditions are associated with a wide range of airway reflex abnormalities. However, the current device for exploring LPMS is limited because it assesses only the laryngeal adductor reflex during fiber-optic endoscopic evaluations of swallowing and requires a high degree of expertise to obtain reliable results, introducing intrinsic expert variability and subjectivity. We designed, developed and validated a new air-pulse laryngo-pharyngeal endoscopic esthesiometer with a built-in laser range-finder (LPEER) based on the evaluation and control of air-pulse variability determinants and on intrinsic observer variability and subjectivity determinants of the distance, angle and site of stimulus impact. The LPEER was designed to be capable of delivering precise and accurate stimuli with a wide range of intensities that can explore most laryngo-pharyngeal reflexes. We initially explored the potential factors affecting the reliability of LPMS tests and included these factors in a multiple linear regression model. The following factors significantly affected the precision and accuracy of the test (P < 0.001): the tube conducting the air-pulses, the supply pressure of the system, the duration of the air-pulses, and the distance and angle between the end of the tube conducting the air-pulses and the site of impact. To control all of these factors, an LPEER consisting of an air-pulse generator and an endoscopic laser range-finder was designed and manufactured. We assessed the precision and accuracy of the LPEER's stimulus and range-finder according to the coefficient of variation (CV) and by looking at the differences between the measured properties and the desired values, and we performed a pilot validation on ten human subjects. The air-pulses and range-finder exhibited good precision and accuracy (CV < 0.06), with differences between the desired and measured properties at <3 % and a range-finder measurement error of <1 mm. The tests in patients demonstrated obtainable and reproducible thresholds for the laryngeal adductor, cough and gag reflexes. The new LPEER was capable of delivering precise and accurate stimuli for exploring laryngo-pharyngeal reflexes.

Association of low back pain on physical, sociodemographic and lifestyle factors across a general population sample within Greece.

PubMed

Billis, E; Koutsojannis, C; Matzaroglou, C; Gliatis, J; Fousekis, K; Gioftsos, G; Papandreou, M; McCarthy, C; Oldham, J A; Tsepis, E

2017-01-01

Although low back pain (LBP) is a debilitating problem internationally, there is not a lot of research on its impact on physical, psychosocial and lifestyle factors. Especially in mediterranean countries, such as Greece, it is not sufficiently explored whether physical (pain location, activity limitation etc.), sociodemographic (education, smoking etc.) or lifestyle factors (i.e. quality of life or anxiety) are influenced by LBP. To estimate LBP prevalence in the Greek general population and explore its association with particular sociodemographic, physical and lifestyle factors. A sample of 3125 people of the Greek adult population was randomly selected by stratified sampling encompassing rural and urban representation within the Greek mainland. An extended survey form was developed entailing three sections; personal (sociodemographic) information, questions on symptomatology and physical factors (i.e. pain characteristics, recurrence, physical disability etc.) and 3 self-administered questionnaires (including mostly lifestyle factors); Hospital Anxiety and Depression (HAD) scale for anxiety and depression, SF-12 for quality of life (QoL) and Roland-Morris for disability. A total of 471 (15%) people reported LBP (210 males, mean age: 47.04 ± 15.03). Amongst them 60% reported sciatica, 76% suffered recurrent LBP and 70% received specialist care. Low disability levels, moderate to high pain intensity, gender differences and good self-reported QoL and psychosocial status were reported. Sociodemographic characteristics (income, smoking, marital status etc.) were not associated with LBP physical factors, apart from age which correlated with physical disability and wellness (r being 0.446 and 0.405, respectively, p< 0.001). Physical factors (particularly pain intensity and location) correlated with lifestyle factors (QoL) and disability (r ranging between 0.396 and 0.543, p< 0.001). Mental wellness, anxiety and depression (as lifestyle factors) were not associated with sociodemographic or physical factors. Physical parameters were amongst the most prevalent characteristics of the Greek sample, thus offering a direction towards a more targeted treatment and rehabilitation planning. Unlike previous literature, most sociodemographic characteristics were not correlated with any LBP physical or lifestyle factors, thus possibly indicating a different socioeconomic background and aetiology domain to that of the usual non-specific LBP spectrum.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clayton, James; Shedlock, Daniel; Langeveld, Willem G.J.

Two goals for security scanning of cargo and freight are the ability to determine the type of material that is being imaged, and to do so at low radiation dose. One commonly used technique to determine the effective Z of the cargo is dual-energy imaging, i.e. imaging with different x-ray energy spectra. Another technique uses the fact that the transmitted x-ray spectrum itself also depends on the effective Z. Spectroscopy is difficult because the energy of individual x rays needs to be measured in a very high count-rate environment. Typical accelerators for security applications offer large but short bursts ofmore » x-rays, suitable for current-mode integrated imaging. In order to perform x-ray spectroscopy, a new accelerator design is desired that has the following features: 1) increased duty factor in order to spread out the arrival of x-rays at the detector array over time; 2) x-ray intensity modulation from one delivered pulse to the next by adjusting the accelerator electron beam instantaneous current so as to deliver adequate signal without saturating the spectroscopic detector; and 3) the capability to direct the (forward peaked) x-ray intensity towards high-attenuation areas in the cargo (“fan-beam-steering”). Current sources are capable of 0.1% duty factor, although usually they are operated at significantly lower duty factors (~0.04%), but duty factors in the range 0.4-1.0% are desired. The higher duty factor can be accomplished, e.g., by moving from 300 pulses per second (pps) to 1000 pps and/or increasing the pulse duration from a typical 4 μs to 10 μs. This paper describes initial R&D to examine cost effective modifications that could be performed on a typical accelerator for these purposes, as well as R&D for fan-beam steering.« less

High dynamic range infrared radiometry and imaging

NASA Technical Reports Server (NTRS)

Coon, Darryl D.; Karunasiri, R. P. G.; Bandara, K. M. S. V.

1988-01-01

The use is described of cryogenically cooled, extrinsic silicon infrared detectors in an unconventional mode of operation which offers an unusually large dynamic range. The system performs intensity-to-frequency conversion at the focal plane via simple circuits with very low power consumption. The incident IR intensity controls the repetition rate of short duration output pulses over a pulse rate dynamic range of about 10(6). Theory indicates the possibility of monotonic and approx. linear response over the full dynamic range. A comparison between the theoretical and the experimental results shows that the model provides a reasonably good description of experimental data. Some measurements of survivability with a very intense IR source were made on these devices and found to be very encouraging. Evidence continues to indicate that some variations in interpulse time intervals are deterministic rather than probabilistic.

Infrared Line Intensities for Formaldehyde from Simultaneous Measurements in the Infrared and Far Infrared Spectral Ranges

NASA Astrophysics Data System (ADS)

Fissiaux, L.; Földes, T.; Tchana, F. Kwabia; Daumont, L.; Lepère, M.; Vander Auwera, J.

2011-06-01

Formaldehyde (H_2CO) is an important intermediate compound in the degradation of the volatile organic compounds (VOCs), including methane, in the terrestrial troposphere. Its observation using optical remote sensing in the infrared range relies on the 3.6 and 5.7 μm absorption bands. Band and individual line intensities have been reported in both ranges. With the present work, we aim to also derive infrared line intensities for formaldehyde, however relying on pure rotation line intensities and the known electric dipole moment to determine the particle density. Indeed, because formaldehyde polymerizes or degrades easily, the gas phase may contain polymerization or degradation products. Spectra of H_2CO diluted in 10 hPa of N_2 were therefore simultaneously recorded in the 20-60 Cm-1 and 3.6 μm ranges, respectively using a Bruker IFS125HR Fourier transform spectrometer and a tunable diode laser. see A. Perrin, D. Jacquemart, F. Kwabia Tchana, N. Lacome, J. Quant. Spectrosc. Radiat. Transfer 110 (2009) 700-716, and references therein

Patching the Leaky STEM Pipeline: Identifying Institutional Factors That Influence a STEM Qualified Female Undergraduate s Choice of Institution

NASA Astrophysics Data System (ADS)

Hurlock, Ashley J.

Despite increased female participation in the workforce and females earning more undergraduate degrees than men over the past decade, women are still awarded fewer undergraduate degrees than men and hold less than 25% of jobs in the areas of science, technology, engineering and math, or STEM (Beede, et al., 2011). Research shows that females may be leaking from the STEM pipeline because they are not choosing to attend institutions that fulfill their interdisciplinary and non-academic interests or have learning environments that are supportive of their needs. The purpose of this quantitative, cross-sectional survey study, conducted at one non-research intensive university, was to identify institutional factors most pertinent to the decision to attend a non-research intensive university by a "STEM qualified" female undergraduate student. 23 of 45 factors were reported as positively influencing their decision regardless of major. The top six factors for both groups were: average class size, campus environment, a visit to campus, university population size, and major/department offered. The seven factors ranked statistically significantly different between STEM and non-STEM majors were undergraduate research opportunities, faculty reputation, graduate/professional school admission, academic support/tutoring, graduate program available, intramural sports, and off-campus housing. Only two of 17 factors negatively influenced STEM majors who were accepted to a research intensive university: the research intensive university's size and average class sizes were undesirable compared to their current institution. STEM qualified females weighed the importance of non-academic factors as high, or higher, than critical academic factors. STEM qualified females are also choosing to attend the non-research intensive university for a variety of reasons and not simply because another institution did not offer certain academic factors. Future studies should expanded to include other non-research intensive universities, research intensive universities, and high schools in order to further understand the impact that certain factors have on female choice of institution. The authors strongly feel that if institutions which provide a more supportive environment for female undergraduates create successful recruitment initiatives, their female students may be more likely to persist as STEM majors. This could potentially patch one of the substantial leaks in the STEM pipeline for women.

Asymmetric distribution of convection in tropical cyclones over the western North Pacific Ocean

NASA Astrophysics Data System (ADS)

Yang, Lu; Fei, Jianfang; Huang, Xiaogang; Cheng, Xiaoping; Yang, Xiangrong; Ding, Juli; Shi, Wenli

2016-11-01

Forecasts of the intensity and quantitative precipitation of tropical cyclones (TCs) are generally inaccurate, because the strength and structure of a TC show a complicated spatiotemporal pattern and are affected by various factors. Among these, asymmetric convection plays an important role. This study investigates the asymmetric distribution of convection in TCs over the western North Pacific during the period 2005-2012, based on data obtained from the Feng Yun 2 (FY2) geostationary satellite. The asymmetric distributions of the incidence, intensity and morphology of convections are analyzed. Results show that the PDFs of the convection occurrence curve to the azimuth are sinusoidal. The rear-left quadrant relative to TC motion shows the highest occurrence rate of convection, while the front-right quadrant has the lowest. In terms of intensity, weak convections are favored in the front-left of a TC at large distances, whereas strong convections are more likely to appear to the rear-right of a TC within a 300 km range. More than 70% of all MCSs examined here are elongated systems, and meso- β enlongated convective systems (M βECSs) are the most dominant type observed in the outer region of a TC. Smaller MCSs tend to be more concentrated near the center of a TC. While semi-circular MCSs [M βCCSs, MCCs (mesoscale convective complexes)] show a high incidence rate to the rear of a TC, elongated MCSs [M βECSs, PECSs (persistent elongated convective systems)] are more likely to appear in the rear-right quadrant of a TC within a range of 400 km.

Production traits of artificially and naturally hatched geese in intensive and free-range systems - II: slaughter, carcass and meat quality traits.

PubMed

Boz, M A; Sarıca, M; Yamak, U S

2017-04-01

1. This study investigates the slaughter, carcass and meat quality traits of artificially and naturally hatched geese in intensive and free-range production systems. 2. The study was conducted with 114 naturally hatched and 102 artificially hatched geese. From each replicate of the intensive and free-range systems, one female and one male goose were slaughtered at the ages of 14, 16 and 18 weeks (a total of 32 geese per slaughter week). 3. Artificially hatched geese had higher slaughter weights (5280 vs. 4404 g), carcass weights (3520 vs. 2863), dressing percentages (66.6-65.2% vs. 65.0-63.6%) and carcass part, feather and edible inner organ weights. The ratio of both edible inner organs and abdominal fat was higher in naturally hatched geese. Breast meat L*, a* and pH values and thigh meat dry matter values were higher in artificially hatched geese, whereas thigh meat b* and pH values were higher in naturally hatched geese. 4. Intensively reared geese had higher slaughter weights (4900 vs. 4783 g), carcass weights (3253 vs. 3130 g) and abdominal fat weights (280 vs. 250 g), as well as higher dressing percentages (66.3-64.9% vs. 65.3-63.9%). Breast meat b* and thigh meat L* values were higher in the intensive system, while breast and thigh pH values, dripping loss and cooking loss were higher in the free-range system. Water-holding capacity was higher in the intensive system. 5. In conclusion, artificially hatched, intensively reared geese had the highest slaughter weights; however, both artificially and naturally hatched geese raised in a free-range system reached acceptable slaughter weights and can thus be recommended for use with this type of production system.

Outbreak of Severe Histoplasmosis Among Tunnel Workers-Dominican Republic, 2015.

PubMed

Armstrong, Paige A; Beard, John D; Bonilla, Luis; Arboleda, Nelson; Lindsley, Mark D; Chae, Sae-Rom; Castillo, Delia; Nuñez, Ramona; Chiller, Tom; de Perio, Marie A; Pimentel, Raquel; Vallabhaneni, Snigdha

2018-05-02

Histoplasmosis is a fungal infection associated with exposure to bat guano. An outbreak of an unknown severe febrile illness occurred among tunnel workers in the Dominican Republic, and resulted in several deaths. We conducted an investigation to confirm etiology and recommend control measures. A case was defined as fever and ≥2 symptoms consistent with histoplasmosis in a tunnel worker, July-September 2015. We interviewed workers and family members, reviewed medical records, tested serum and urine for Histoplasma antigen/antibody, and conducted a cohort study to identify risk factors for histoplasmosis and severe infection (intensive care). A crew of 36 male workers removed large amounts of bat guano from tunnels without respiratory protection for a median of 24 days per worker (range, 1-25 days). Median age was 32 years (range, 18-62 years); none were immunocompromised. Thirty (83%) workers had illness that met the case definition, of whom 28 (93%) were hospitalized, 9 (30%) required intensive care, 6 (20%) required intubation, and 3 (10%) died. The median time from symptom onset to antifungal treatment was 6 days (range, 1-11 days). Twenty-two of 34 (65%) workers had laboratory evidence of infection. Severe illnesses and death likely resulted from exposure to large inocula of Histoplasma capsulatum spores in an enclosed space, lack of respiratory protection, and delay in recognition and treatment. Clinician education about histoplasmosis, improved laboratory capacity to diagnose fungal infections, and occupational health guidance to protect workers against endemic fungi are recommended in the Dominican Republic.

High-Intensity Locomotor Exercise Increases Brain-Derived Neurotrophic Factor in Individuals with Incomplete Spinal Cord Injury

PubMed Central

Leech, Kristan A.

2017-01-01

Abstract High-intensity locomotor exercise is suggested to contribute to improved recovery of locomotor function after neurological injury. This may be secondary to exercise-intensity–dependent increases in neurotrophin expression demonstrated previously in control subjects. However, rigorous examination of intensity-dependent changes in neurotrophin levels is lacking in individuals with motor incomplete spinal cord injury (SCI). Therefore, the primary aim of this study was to evaluate the effect of locomotor exercise intensity on peripheral levels of brain-derived neurotrophic factor (BDNF) in individuals with incomplete SCI. We also explored the impact of the Val66Met single-nucleotide polymorphism (SNP) on the BDNF gene on intensity-dependent changes. Serum concentrations of BDNF and insulin-like growth factor-1 (IGF-1), as well as measures of cardiorespiratory dynamics, were evaluated across different levels of exercise intensity achieved during a graded-intensity, locomotor exercise paradigm in 11 individuals with incomplete SCI. Our results demonstrate a significant increase in serum BDNF at high, as compared to moderate, exercise intensities (p = 0.01) and 15 and 30 min post-exercise (p < 0.01 for both), with comparison to changes at low intensity approaching significance (p = 0.05). Serum IGF-1 demonstrated no intensity-dependent changes. Significant correlations were observed between changes in BDNF and specific indicators of exercise intensity (e.g., rating of perceived exertion; R = 0.43; p = 0.02). Additionally, the data suggest that Val66Met SNP carriers may not exhibit intensity-dependent changes in serum BDNF concentration. Given the known role of BDNF in experience-dependent neuroplasticity, these preliminary results suggest that exercise intensity modulates serum BDNF concentrations and may be an important parameter of physical rehabilitation interventions after neurological injury. PMID:27526567

Repeated high-intensity exercise in professional rugby union.

PubMed

Austin, Damien; Gabbett, Tim; Jenkins, David

2011-07-01

The aim of the present study was to describe the frequency, duration, and nature of repeated high-intensity exercise in Super 14 rugby union. Time-motion analysis was used during seven competition matches over the 2008 and 2009 Super 14 seasons; five players from each of four positional groups (front row forwards, back row forwards, inside backs, and outside backs) were assessed (20 players in total). A repeated high-intensity exercise bout was considered to involve three or more sprints, and/or tackles and/or scrum/ruck/maul activities within 21 s during the same passage of play. The range of repeated high-intensity exercise bouts for each group in a match was as follows: 11-18 for front row forwards, 11-21 for back row forwards, 13-18 for inside backs, and 2-11 for outside backs. The durations of the most intense repeated high-intensity exercise bouts for each position ranged from 53 s to 165 s and the minimum recovery periods between repeated high-intensity exercise bouts ranged from 25 s for the back row forwards to 64 s for the front row forwards. The present results show that repeated high-intensity exercise bouts vary in duration and activities relative to position but all players in a game will average at least 10 changes in activity in the most demanding bouts and complete at least one tackle and two sprints. The most intense periods of activity are likely to last as long as 120 s and as little as 25 s recovery may separate consecutive repeated high-intensity exercise bouts. The present findings can be used by coaches to prepare their players for the most demanding passages of play likely to be experienced in elite rugby union.

Spectral and thermodynamic properties for the exciplexes of N-alkyl carbazoles with dicyanobenzenes in THF

NASA Astrophysics Data System (ADS)

Asim, Sadia; Mansha, Asim; Landgraf, Stephan; Grampp, Günter; Zahid, Muhammad; Bhatti, Haq Nawaz

2014-01-01

The exciplex emission spectra of N-ethylcarbazole with 1,2-dicyanobenzene (NEC/1,2-DCB), N-methylcarbazole with 1,2-dicyanobenzene (NMC/1,2-DCB), 1,3-dicyanobenzene (NMC/1,3-DCB), and 1,4-dicyanobenzene (NMC/1,4-DCB) are studied in tetrahydrofuran (THF) for the temperature range starting from 253 K to 334 K. Thermochromic shifts along with the spectral properties including change in peak intensities and the ratio of exciplex peak intensity to fluorophore peak intensity are studied. Effect of temperature on the energy of zero-zero transitions hνo‧, Huang-Rhys factor (S), Gauss broadening of vibronic level (σ) and the dominant high-frequency vibration (hνν) are also part of investigation. Enthalpy of exciplex formation (ΔHEX∗) calculated by the model proposed by A. Weller and the Gibb's energy of electron transfer (ΔGet∗) for all exciplex systems are also discussed in the present paper. All the exciplexes under study were observed to be dipolar in nature. The exciplex of the N-methylcarbazole/1,4-dicyanobenzene was found to be the most stable and the N-methylcarbazole/1,3-dicyanobenzene was the weakest exciplex system.

Statistical optimization of ultraviolet irradiate conditions for vitamin D₂ synthesis in oyster mushrooms (Pleurotus ostreatus) using response surface methodology.

PubMed

Wu, Wei-Jie; Ahn, Byung-Yong

2014-01-01

Response surface methodology (RSM) was used to determine the optimum vitamin D2 synthesis conditions in oyster mushrooms (Pleurotus ostreatus). Ultraviolet B (UV-B) was selected as the most efficient irradiation source for the preliminary experiment, in addition to the levels of three independent variables, which included ambient temperature (25-45°C), exposure time (40-120 min), and irradiation intensity (0.6-1.2 W/m2). The statistical analysis indicated that, for the range which was studied, irradiation intensity was the most critical factor that affected vitamin D2 synthesis in oyster mushrooms. Under optimal conditions (ambient temperature of 28.16°C, UV-B intensity of 1.14 W/m2, and exposure time of 94.28 min), the experimental vitamin D2 content of 239.67 µg/g (dry weight) was in very good agreement with the predicted value of 245.49 µg/g, which verified the practicability of this strategy. Compared to fresh mushrooms, the lyophilized mushroom powder can synthesize remarkably higher level of vitamin D2 (498.10 µg/g) within much shorter UV-B exposure time (10 min), and thus should receive attention from the food processing industry.

Trend in global black carbon emissions from 1960 to 2007.

PubMed

Wang, Rong; Tao, Shu; Shen, Huizhong; Huang, Ye; Chen, Han; Balkanski, Yves; Boucher, Olivier; Ciais, Philippe; Shen, Guofeng; Li, Wei; Zhang, Yanyan; Chen, Yuanchen; Lin, Nan; Su, Shu; Li, Bengang; Liu, Junfeng; Liu, Wenxin

2014-06-17

Black carbon (BC) plays an important role in both climate change and health impact. Still, BC emissions as well as the historical trends are associated with high uncertainties in existing inventories. In the present study, global BC emissions from 1960 to 2007 were estimated for 64 sources, by using recompiled fuel consumption and emission factor data sets. Annual BC emissions had increased from 5.3 (3.4-8.5 as an interquartile range) to 9.1 (5.6-14.4) teragrams during this period. Our estimations are 11-16% higher than those in previous inventories. Over the period, we found that the BC emission intensity, defined as the amount of BC emitted per unit of energy production, had decreased for all the regions, especially China and India. Improvements in combustion technology and changes in fuel composition had led to an increase in energy use efficiency, and subsequently a decline of BC emission intensities in power plants, the residential sector, and transportation. On the other hand, the BC emission intensities had increased in the industrial and agricultural sectors, mainly due to an expansion of low-efficiency industry (coke and brick production) in developing countries and to an increasing usage of diesel in agriculture in developed countries.

Relationships between Adaptive Behaviours, Personal Factors, and Participation of Young Children.

PubMed

Killeen, Hazel; Shiel, Agnes; Law, Mary; O'Donovan, Donough J; Segurado, Ricardo; Anaby, Dana

2017-12-19

To examine the extent to which personal factors (age, socioeconomic grouping, and preterm birth) and adaptive behaviour explain the participation patterns of young children. 65 Children 2-5 years old with and without a history of preterm birth and no physical or intellectual disability were selected by convenience sampling from Galway University Hospital, Ireland. Interviews with parents were conducted using the Adaptive Behaviour Assessment System, Second Edition (ABAS-II) and the Assessment of Preschool Children's Participation (APCP). Linear regression models were used to identify associations between the ABAS-II scores, personal factors, and APCP scores for intensity and diversity of participation. Adaptive behaviour explained 21% of variance in intensity of play, 18% in intensity of Skill Development, 7% in intensity of Active Physical Recreation, and 6% in intensity of Social Activities controlling for age, preterm birth, and socioeconomic grouping. Age explained between 1% and 11% of variance in intensity of participation scores. Adapted behaviour (13%), Age (17%), and socioeconomic grouping (5%) explained a significant percentage of variance in diversity of participation controlling for the other variables.  Adaptive behaviour had a unique contribution to children's intensity and diversity of participation, suggesting its importance.

Quantification of Urban Environment's Role in Slope Stability for Landslide Events.

NASA Astrophysics Data System (ADS)

Bozzolan, E.; Holcombe, E.; Wagener, T.; Pianosi, F.

2017-12-01

The combination of a rapid and unplanned urban development with a likely future climate change could significantly affect landslide occurrences in the humid tropics, where rainfall events of high intensity and duration are the dominant trigger for landslide risk. The attention of current landslide hazard studies is largely focussed on natural slope processes based on combinations of environmental factors, excluding the role of urbanisation on slope stability. This project aims to understand the relative influence of urbanisation features on local slope stability and to translate the findings to a wider region. Individual slopes are firstly analysed with the software CHASM, a physically based model which combines soil hydrology and slope stability assessment. Instead of relying on existing records, generally lacking for landslides, ranges of plausible preparatory (such as slope, cohesion, friction angles), triggering (rainfall) and aggravating factors (deforestation, house density and water network) are defined and possible combinations of these factors are created by sampling from those ranges. The influence of urban features on site hydrology and stability mechanisms are evaluated and then implemented in denser urban contexts, characteristic of unplanned settlements. The results of CHASMS can be transferred to regional maps in order to identify the areas belonging to the triggering combinations of factors previously found. In this way, areas susceptible to landslides can be detected not only in terms of natural factors but also in relation to the degree of urbanisation. Realistic scenarios can be extrapolated from the areas considered and then analysed again with CHASM. This permits to adapt (and improve) the initial variability ranges of the factors, creating a general-specific cycle able to identify the landslide susceptibility regions and outline a hazard map. Once the triggers are understood, possible consequences can be assessed and mitigation strategies can be evaluated. The ability to define local urban rainfall threshold for landslide slope stability helps the decision-making process to prioritize the areas of interest and locally define the main causes of instability.

Raster Vs. Point Cloud LiDAR Data Classification

NASA Astrophysics Data System (ADS)

El-Ashmawy, N.; Shaker, A.

2014-09-01

Airborne Laser Scanning systems with light detection and ranging (LiDAR) technology is one of the fast and accurate 3D point data acquisition techniques. Generating accurate digital terrain and/or surface models (DTM/DSM) is the main application of collecting LiDAR range data. Recently, LiDAR range and intensity data have been used for land cover classification applications. Data range and Intensity, (strength of the backscattered signals measured by the LiDAR systems), are affected by the flying height, the ground elevation, scanning angle and the physical characteristics of the objects surface. These effects may lead to uneven distribution of point cloud or some gaps that may affect the classification process. Researchers have investigated the conversion of LiDAR range point data to raster image for terrain modelling. Interpolation techniques have been used to achieve the best representation of surfaces, and to fill the gaps between the LiDAR footprints. Interpolation methods are also investigated to generate LiDAR range and intensity image data for land cover classification applications. In this paper, different approach has been followed to classifying the LiDAR data (range and intensity) for land cover mapping. The methodology relies on the classification of the point cloud data based on their range and intensity and then converted the classified points into raster image. The gaps in the data are filled based on the classes of the nearest neighbour. Land cover maps are produced using two approaches using: (a) the conventional raster image data based on point interpolation; and (b) the proposed point data classification. A study area covering an urban district in Burnaby, British Colombia, Canada, is selected to compare the results of the two approaches. Five different land cover classes can be distinguished in that area: buildings, roads and parking areas, trees, low vegetation (grass), and bare soil. The results show that an improvement of around 10 % in the classification results can be achieved by using the proposed approach.

The impact of 24-hr, in-hospital pediatric critical care attending physician presence on process of care and patient outcomes*.

PubMed

Nishisaki, Akira; Pines, Jesse M; Lin, Richard; Helfaer, Mark A; Berg, Robert A; Tenhave, Thomas; Nadkarni, Vinay M

2012-07-01

Attending physicians are only required to provide in-hospital coverage during daytime hours in many pediatric intensive care units. An in-hospital 24-hr pediatric intensive care unit attending coverage model has been increasingly popular, but the impact of 24-hr, in-hospital attending coverage on care processes and outcomes has not been reported. We compared processes of care and outcomes before and after the implementation of a 24-hr in-hospital pediatric intensive care unit attending physician model. Retrospective comparison of before and after cohorts. A single large, academic tertiary medical/surgical pediatric intensive care unit. : Pediatric intensive care unit admissions in 2000-2006. Transition to 24-hr from 12-hr in-hospital pediatric critical care attending physician coverage model in January 2004. A total of 18,702 patients were admitted to intensive care unit: 8,520 in 24 hrs; 10,182 in 12 hrs. Duration of mechanical ventilation was lower (median 33 hrs [interquartile range 12-88] vs. 48 hrs [interquartile range 16-133], adjusted reduction of 35% [95% confidence interval 25%-44%], p < .001) and intensive care unit length of stay was shorter (median 2 days [interquartile range 1-4] vs. 2 days [interquartile range 1-5], adjusted p < .001) for 24 hr vs. 12 hr coverage. The reduction in mechanical ventilation hours was similar when noninvasive, mechanical ventilation was included in ventilation hours (median 42 hrs vs. 56 hrs, adjusted reduction in ventilation hours: 33% [95% confidence interval 20-45], p < .001). Intensive care unit mortality was not significantly different (2.2% vs. 2.5%, adjusted p =.23). These associations were consistent across daytime and nighttime admissions, weekend and weekday admissions, and among subgroups with higher Pediatric Risk of Mortality III scores, postsurgical patients, and histories of previous intensive care unit admission. Implementation of 24-hr in-hospital pediatric critical care attending coverage was associated with shorter duration of mechanical ventilation and shorter length of intensive care unit stay. After accounting for potential confounders, this finding was consistent across a broad spectrum of critically ill children.

Stress-Intensity Factors along Three-Dimensional Elliptical Crack Fronts

DOT National Transportation Integrated Search

1998-05-01

The objective of the present investigation is to determine the mode I stress-intensity factors along two symmetric surface cracks emanating from a centrally located hole in a rectangular plate (the so-called Round Robin Problem) using the domain inte...

Fatigue crack growth under variable amplitude loading

NASA Astrophysics Data System (ADS)

Sidawi, Jihad A.

1994-09-01

Fatigue crack growth tests were conducted on an Fe 510 E C-Mn steel and a submerged arc welded joint from the same material under constant, variable, and random loading amplitudes. Paris-Erdogan's crack growth rate law was tested for the evaluation of m and C using the stress intensity factor K, the J-integral, the effective stress intensity factor K(sub eff), and the root mean square stress intensity factor K(sub rms) fracture mechanics concepts. The effect of retardation and residual stresses resulting from welding was also considered. It was found that all concepts gave good life predictions in all cases.

[Urban heat island intensity and its grading in Liaoning Province of Northeast China].

PubMed

Li, Li-Guang; Wang, Hong-Bo; Jia, Qing-Yu; Lü, Guo-Hong; Wang, Xiao-Ying; Zhang, Yu-Shu; Ai, Jing-Feng

2012-05-01

According to the recorded air temperature data and their continuity of each weather station, the location of each weather station, the numbers of and the distances among the weather stations, and the records on the weather stations migration, several weather stations in Liaoning Province were selected as the urban and rural representative stations to study the characteristics of urban heat island (UHI) intensity in the province. Based on the annual and monthly air temperature data of the representative stations, the ranges and amplitudes of the UHI intensity were analyzed, and the grades of the UHI intensity were classified. The Tieling station, Dalian station, Anshan station, Chaoyang station, Dandong station, and Jinzhou station and the 18 stations including Tai' an station were selected as the representative urban and rural weather stations, respectively. In 1980-2009, the changes of the annual UHI intensity in the 6 representative cities differed. The annual UHI intensity in Tieling was in a decreasing trend, while that in the other five cities was in an increasing trend. The UHI intensity was strong in Tieling but weak in Dalian. The changes of the monthly UHI intensity in the 6 representative cities also differed. The distribution of the monthly UHI intensity in Dandong, Jinzhou and Tieling took a "U" shape, with the maximum and minimum appeared in January and in May-August, respectively, indicating that the monthly UHI intensity was strong in winter and weak in summer. The ranges of the annual and monthly UHI intensity in the 6 cities were 0.57-2.15 degrees C and -0.70-4.60 degrees C, and the ranges of 0.5-2.0 degrees C accounted for 97.8% and 72.3%, respectively. The UHI intensity in the province could be classified into 4 grades, i. e., weak, strong, stronger and strongest.

Factors That Influence Running Intensity in Interchange Players in Professional Rugby League.

PubMed

Delaney, Jace A; Thornton, Heidi R; Duthie, Grant M; Dascombe, Ben J

2016-11-01

Rugby league coaches adopt replacement strategies for their interchange players to maximize running intensity; however, it is important to understand the factors that may influence match performance. To assess the independent factors affecting running intensity sustained by interchange players during professional rugby league. Global positioning system (GPS) data were collected from all interchanged players (starters and nonstarters) in a professional rugby league squad across 24 matches of a National Rugby League season. A multilevel mixed-model approach was employed to establish the effect of various technical (attacking and defensive involvements), temporal (bout duration, time in possession, etc), and situational (season phase, recovery cycle, etc) factors on the relative distance covered and average metabolic power (P met ) during competition. Significant effects were standardized using correlation coefficients, and the likelihood of the effect was described using magnitude-based inferences. Superior intermittent running ability resulted in very likely large increases in both relative distance and P met . As the length of a bout increased, both measures of running intensity exhibited a small decrease. There were at least likely small increases in running intensity for matches played after short recovery cycles and against strong opposition. During a bout, the number of collision-based involvements increased running intensity, whereas time in possession and ball time out of play decreased demands. These data demonstrate a complex interaction of individual- and match-based factors that require consideration when developing interchange strategies, and the manipulation of training loads during shorter recovery periods and against stronger opponents may be beneficial.

Effect of gamma-irradiation of bovine serum albumin solution on the formation of zigzag film textures

NASA Astrophysics Data System (ADS)

Glibitskiy, Dmitriy M.; Gorobchenko, Olga A.; Nikolov, Oleg T.; Cheipesh, Tatiana A.; Roshal, Alexander D.; Zibarov, Artem M.; Shestopalova, Anna V.; Semenov, Mikhail A.; Glibitskiy, Gennadiy M.

2018-03-01

Formation of patterns on the surface of dried films of saline biopolymer solutions is influenced by many factors, including particle size and structure. Proteins may be modified under the influence of ionizing radiation. By irradiating protein solutions with gamma rays, it is possible to affect the formation of zigzag (Z) structures on the film surface. In our study, the films were obtained by desiccation of bovine serum albumin (BSA) solutions, which were irradiated by a 60Co gamma-source at doses ranging from 1 Gy to 12 kGy. The analysis of the resulting textures on the surface of the films was carried out by calculating the specific length of Z-structures. The results are compared against the absorption and fluorescence spectroscopy and dynamic light scattering (DLS) data. Gamma-irradiation of BSA solutions in the 1-200 Gy range practically does not influence the amount of Z-structures on the film surface. The decrease in fluorescence intensity and increase in absorbance intensity point to the destruction of BSA structure at 2 and 12 kGy, and DLS shows a more than 160% increase in particle size as a result of BSA aggregation at 2 kGy. This prevents the formation of Z-structures, which is reflected in the decrease of their specific length.

Less than 2 °C warming by 2100 unlikely

NASA Astrophysics Data System (ADS)

Raftery, Adrian E.; Zimmer, Alec; Frierson, Dargan M. W.; Startz, Richard; Liu, Peiran

2017-09-01

The recently published Intergovernmental Panel on Climate Change (IPCC) projections to 2100 give likely ranges of global temperature increase in four scenarios for population, economic growth and carbon use. However, these projections are not based on a fully statistical approach. Here we use a country-specific version of Kaya's identity to develop a statistically based probabilistic forecast of CO2 emissions and temperature change to 2100. Using data for 1960-2010, including the UN's probabilistic population projections for all countries, we develop a joint Bayesian hierarchical model for Gross Domestic Product (GDP) per capita and carbon intensity. We find that the 90% interval for cumulative CO2 emissions includes the IPCC's two middle scenarios but not the extreme ones. The likely range of global temperature increase is 2.0-4.9 °C, with median 3.2 °C and a 5% (1%) chance that it will be less than 2 °C (1.5 °C). Population growth is not a major contributing factor. Our model is not a `business as usual' scenario, but rather is based on data which already show the effect of emission mitigation policies. Achieving the goal of less than 1.5 °C warming will require carbon intensity to decline much faster than in the recent past.

Fluorescence decay kinetics and imaging of NAD(P)H and flavins as metabolic indicators

NASA Astrophysics Data System (ADS)

Schneckenburger, Herbert; Koenig, Karsten

1992-07-01

The intrinsic fluorescence of various cell cultures in the blue and green spectral range has been attributed mainly to hydrated nicotinamide adenine dinucleotide (NADH) and flavin molecules. Their fluorescence decay curves were measured with subnanosecond resolution. The reduced coenzymes NADH and hydrated nicotinamide adenine dinucleotide phosphate NADPH, both showed a biexponential decay pattern in solution with similar time constants, but different relative intensities of the two components. They could thus be distinguished from one another as well as from their oxidized forms. The NADPH fluorescence of Saccharomyces cerevisiae was located within the cytoplasm and its organelles and was by about a factor of 4 higher for respiratory-deficient than for intact yeast strains. Intracellular flavin fluorescence showed a triexponential behavior--probably due to a superposition of protein-bound and free flavin molecules. The lifetime of the shortest component varied within the range of 0.20 to 0.50 ns between respiratory-deficient and intact yeast strains, and the relative intensity of this component was most pronounced for the intact strain DL1. Time- resolved fluorescence seems therefore to be an appropriate method of probe the function of the respiratory chain and--in the further step--to differentiate between various types of cells and tissues in medical diagnosis or environmental research.

Resistance Spot Welding Characteristics and High Cycle Fatigue Behavior of DP 780 Steel Sheet

NASA Astrophysics Data System (ADS)

Pal, Tapan Kumar; Bhowmick, Kaushik

2012-02-01

Resistance spot welding characteristics of DP 780 steel was investigated using peel test, microhardness test, tensile shear test, and fatigue test. Tensile shear test provides better spot weld quality than conventional peel test and hardness is not a good indicator of the susceptibility to interfacial fracture. The results of high-cycle fatigue behavior of spot welded DP 780 steel under two different parameters show that at high load low cycle range a significant difference in the S- N curve and almost similar fatigue behavior of spot welds at low load high cycle range are obtained. However, when applied load was converted to stress intensity factor, the difference in the fatigue behavior between welds diminished. Furthermore, a transition in fracture mode, i.e., interfacial and plug and hole-type at about 50% of yield load is observed.

On the Impact Angle of Hurricane Sandy's New Jersey Landfall

NASA Technical Reports Server (NTRS)

Hall, Timothy M.; Sobel, Adam H.

2013-01-01

Hurricane Sandy's track crossed the New Jersey coastline at an angle closer to perpendicular than any previous hurricane in the historic record, one of the factors contributing to recordsetting peak-water levels in parts of New Jersey and New York. To estimate the occurrence rate of Sandy-like tracks, we use a stochastic model built on historical hurricane data from the entire North Atlantic to generate a large sample of synthetic hurricanes. From this synthetic set we calculate that under long-term average climate conditions, a hurricane of Sandy's intensity or greater (category 1+) makes NJ landfall at an angle at least as close to perpendicular as Sandy's at an average annual rate of 0.0014 yr-1 (95% confidence range 0.0007 to 0.0023); i.e., a return period of 714 years (95% confidence range 435 to 1429).

Do Wealth Shocks Affect Health? New Evidence from the Housing Boom

PubMed Central

Fichera, Eleonora

2016-01-01

Abstract We exploit large exogenous changes in housing wealth to examine the impact of wealth gains and losses on individual health. In UK household, panel data house price increases, which endow owners with greater wealth, lower the likelihood of home owners exhibiting a range of non‐chronic health conditions and improve their self‐assessed health with no effect on their psychological health. These effects are not transitory and persist over a 10‐year period. Using a range of fixed effects models, we provide robust evidence that these results are not biased by reverse causality or omitted factors. For owners' wealth gains affect labour supply and leisure choices indicating that house price increases allow individuals to reduce intensity of work with commensurate health benefits. © 2016 The Authors. Health Economics Published by John Wiley & Sons, Ltd. PMID:27870303

Prefrontal rTMS for treating depression: location and intensity results from the OPT-TMS multi-site clinical trial.

PubMed

Johnson, Kevin A; Baig, Mirza; Ramsey, Dave; Lisanby, Sarah H; Avery, David; McDonald, William M; Li, Xingbao; Bernhardt, Elisabeth R; Haynor, David R; Holtzheimer, Paul E; Sackeim, Harold A; George, Mark S; Nahas, Ziad

2013-03-01

Motor cortex localization and motor threshold determination often guide Transcranial Magnetic Stimulation (TMS) placement and intensity settings for non-motor brain stimulation. However, anatomic variability results in variability of placement and effective intensity. Post-study analysis of the OPT-TMS Study reviewed both the final positioning and the effective intensity of stimulation (accounting for relative prefrontal scalp-cortex distances). We acquired MRI scans of 185 patients in a multi-site trial of left prefrontal TMS for depression. Scans had marked motor sites (localized with TMS) and marked prefrontal sites (5 cm anterior of motor cortex by the "5 cm rule"). Based on a visual determination made before the first treatment, TMS therapy occurred either at the 5 cm location or was adjusted 1 cm forward. Stimulation intensity was 120% of resting motor threshold. The "5 cm rule" would have placed stimulation in premotor cortex for 9% of patients, which was reduced to 4% with adjustments. We did not find a statistically significant effect of positioning on remission, but no patients with premotor stimulation achieved remission (0/7). Effective stimulation ranged from 93 to 156% of motor threshold, and no seizures were induced across this range. Patients experienced remission with effective stimulation intensity ranging from 93 to 146% of motor threshold, and we did not find a significant effect of effective intensity on remission. Our data indicates that individualized positioning methods are useful to reduce variability in placement. Stimulation at 120% of motor threshold, unadjusted for scalp-cortex distances, appears safe for a broad range of patients. Copyright © 2013 Elsevier Inc. All rights reserved.

Clinimetric properties of the Nepali version of the Pain Catastrophizing Scale in individuals with chronic pain

PubMed Central

Thibault, Pascal; Abbott, J Haxby; Jensen, Mark P

2018-01-01

Background Pain catastrophizing is an exaggerated negative cognitive response related to pain. It is commonly assessed using the Pain Catastrophizing Scale (PCS). Translation and validation of the scale in a new language would facilitate cross-cultural comparisons of the role that pain catastrophizing plays in patient function. Purpose The aim of this study was to translate and culturally adapt the PCS into Nepali (Nepali version of PCS [PCS-NP]) and evaluate its clinimetric properties. Methods We translated, cross-culturally adapted, and performed an exploratory factor analysis (EFA) of the PCS-NP in a sample of adults with chronic pain (N=143). We then confirmed the resulting factor model in a separate sample (N=272) and compared this model with 1-, 2-, and 3-factor models previously identified using confirmatory factor analyses (CFAs). We also computed internal consistencies, test–retest reliabilities, standard error of measurement (SEM), minimal detectable change (MDC), and limits of agreement with 95% confidence interval (LOA95%) of the PCS-NP scales. Concurrent validity with measures of depression, anxiety, and pain intensity was assessed by computing Pearson’s correlation coefficients. Results The PCS-NP was comprehensible and culturally acceptable. We extracted a two-factor solution using EFA and confirmed this model using CFAs in the second sample. Adequate fit was also found for a one-factor model and different two- and three-factor models based on prior studies. The PCS-NP scores evidenced excellent reliability and temporal stability, and demonstrated validity via moderate-to-strong associations with measures of depression, anxiety, and pain intensity. The SEM and MDC for the PCS-NP total score were 2.52 and 7.86, respectively (range of PCS scores 0–52). LOA95% was between −15.17 and +16.02 for the total PCS-NP scores. Conclusion The PCS-NP is a valid and reliable instrument to assess pain catastrophizing in Nepalese individuals with chronic pain. PMID:29430196

Risk factors and predictors for candidemia in pediatric intensive care unit patients: implications for prevention.

PubMed

Zaoutis, Theoklis E; Prasad, Priya A; Localio, A Russell; Coffin, Susan E; Bell, Louis M; Walsh, Thomas J; Gross, Robert

2010-09-01

Candida species are the leading cause of invasive fungal infections in hospitalized children and are the third most common isolates recovered from patients with healthcare-associated bloodstream infection in the United States. Few data exist on risk factors for candidemia in pediatric intensive care unit (PICU) patients. We conducted a population-based case-control study of PICU patients at Children's Hospital of Philadelphia during the period from 1997 through 2004. Case patients were identified using laboratory records, and control patients were selected from PICU rosters. Control patients were matched to case patients by incidence density sampling, adjusting for time at risk. Following conditional multivariate analysis, we performed weighted multivariate analysis to determine predicted probabilities for candidemia given certain risk factor combinations. We identified 101 case patients with candidemia (incidence, 3.5 cases per 1000 PICU admissions). Factors independently associated with candidemia included presence of a central venous catheter (odds ratio [OR], 30.4; 95% confidence interval [CI], 7.7-119.5), malignancy (OR, 4.0; 95% CI, 1.23-13.1), use of vancomycin for >3 days in the prior 2 weeks (OR, 6.2; 95% CI, 2.4-16), and receipt of agents with activity against anaerobic organisms for >3 days in the prior 2 weeks (OR, 3.5; 95% CI, 1.5-8.4). Predicted probability of having various combinations of the aforementioned factors ranged from 10.7% to 46%. The 30-day mortality rate was 44% among case patients and 14% among control patients (OR, 4.22; 95% CI, 2.35-7.60). To our knowledge, this is the first study to evaluate independent risk factors and to determine a population of children in PICUs at high risk for developing candidemia. Future efforts should focus on validation of these risk factors identified in a different PICU population and development of interventions for prevention of candidemia in critically ill children.

Evaluation of the Effect of Surface Finish on High-Cycle Fatigue for SLM-IN718

NASA Technical Reports Server (NTRS)

Lambert, Dennis M.

2016-01-01

A high-cycle fatigue (HCF) knockdown factor was estimated for Inconel 718, manufactured with the selective laser melt (SLM) process. This factor is the reduction at a common fatigue life from the maximum stress in fatigue for low-stress ground (LSG) specimens to the maximum stress of those left with the original surface condition. Various vendors provided specimens. To reduce the number of degrees-of-freedom, only one heat treat condition was evaluated. Testing temperatures included room temperature, 800F, 1000F, and 1200F. The two surface conditions were compared at constant lives, where data was available. The recommended knockdown factor of the as-built surface condition (average roughness of approximately 245 micro-inches/inch) versus low-stress ground condition (roughness <= 4 micro-inches/inch) is approximately 1/3 or 33%. This is to say that for the as-built surface condition, a maximum stress of 2/3 of the stress for LSG can be expected to produce the same life in the as built surface condition. As an alternative method, the surface finish was incorporated into a new parameter with the maximum stress. The new parameter was formulated to be similar to the fracture mechanics stress intensity factor, and it was named the pseudo stress intensity factor, Kp. Using Kp, the variance seemed acceptable across all sources, and the knockdown factor was estimated over the range of data identified by Kp where data occurred. A plot of the results suggests that the knockdown factor is a function of temperature, and that for low lives the knockdown is greater than the knockdown observed above about one million cycles, where it stabilizes. One data point at room temperature was clearly different, and the sparsity of data in the higher life region reduces the value of these results. The method does appear to provide useful results, and further characterization of the method is suggested.

Environmental, psychological, and social influences on physical activity among Japanese adults: structural equation modeling analysis.

PubMed

Ishii, Kaori; Shibata, Ai; Oka, Koichiro

2010-08-05

An understanding of the contributing factors to be considered when examining how individuals engage in physical activity is important for promoting population-based physical activity. The environment influences long-term effects on population-based health behaviors. Personal variables, such as self-efficacy and social support, can act as mediators of the predictive relationship between the environment and physical activity. The present study examines the direct and indirect effects of environmental, psychological, and social factors on walking, moderate-intensity activity excluding walking, and vigorous-intensity activity among Japanese adults. The participants included 1,928 Japanese adults aged 20-79 years. Seven sociodemographic attributes (e.g., gender, age, education level, employment status), psychological variables (self-efficacy, pros, and cons), social variables (social support), environmental variables (home fitness equipment, access to facilities, neighborhood safety, aesthetic sensibilities, and frequency of observing others exercising), and the International Physical Activity Questionnaire were assessed via an Internet-based survey. Structural equation modeling was conducted to determine associations between environmental, psychological, and social factors with physical activity. Environmental factors could be seen to have indirect effects on physical activity through their influence on psychological and social variables such as self-efficacy, pros and cons, and social support. The strongest indirect effects could be observed by examining the consequences of environmental factors on physical activity through cons to self-efficacy. The total effects of environmental factors on physical activity were 0.02 on walking, 0.02 on moderate-intensity activity excluding walking, and 0.05 on vigorous-intensity activity. The present study indicates that environmental factors had indirect effects on walking, moderate-intensity activity excluding walking and vigorous-intensity activity among Japanese adults, especially through the effects on these factors of self-efficacy, social support, and pros and cons. The findings of the present study imply that intervention strategies to promote more engagement in physical activity for population-based health promotion may be necessary.

Environmental, psychological, and social influences on physical activity among Japanese adults: structural equation modeling analysis

PubMed Central

2010-01-01

Background An understanding of the contributing factors to be considered when examining how individuals engage in physical activity is important for promoting population-based physical activity. The environment influences long-term effects on population-based health behaviors. Personal variables, such as self-efficacy and social support, can act as mediators of the predictive relationship between the environment and physical activity. The present study examines the direct and indirect effects of environmental, psychological, and social factors on walking, moderate-intensity activity excluding walking, and vigorous-intensity activity among Japanese adults. Methods The participants included 1,928 Japanese adults aged 20-79 years. Seven sociodemographic attributes (e.g., gender, age, education level, employment status), psychological variables (self-efficacy, pros, and cons), social variables (social support), environmental variables (home fitness equipment, access to facilities, neighborhood safety, aesthetic sensibilities, and frequency of observing others exercising), and the International Physical Activity Questionnaire were assessed via an Internet-based survey. Structural equation modeling was conducted to determine associations between environmental, psychological, and social factors with physical activity. Results Environmental factors could be seen to have indirect effects on physical activity through their influence on psychological and social variables such as self-efficacy, pros and cons, and social support. The strongest indirect effects could be observed by examining the consequences of environmental factors on physical activity through cons to self-efficacy. The total effects of environmental factors on physical activity were 0.02 on walking, 0.02 on moderate-intensity activity excluding walking, and 0.05 on vigorous-intensity activity. Conclusions The present study indicates that environmental factors had indirect effects on walking, moderate-intensity activity excluding walking and vigorous-intensity activity among Japanese adults, especially through the effects on these factors of self-efficacy, social support, and pros and cons. The findings of the present study imply that intervention strategies to promote more engagement in physical activity for population-based health promotion may be necessary. PMID:20684794

Near-infrared spectroscopy of renal tissue in vivo

NASA Astrophysics Data System (ADS)

Grosenick, Dirk; Steinkellner, Oliver; Wabnitz, Heidrun; Macdonald, Rainer; Niendorf, Thoralf; Cantow, Kathleen; Flemming, Bert; Seeliger, Erdmann

2013-03-01

We have developed a method to quantify hemoglobin concentration and oxygen saturation within the renal cortex by near-infrared spectroscopy. A fiber optic probe was used to transmit the radiation of three semiconductor lasers at 690 nm, 800 nm and 830 nm to the tissue, and to collect diffusely remitted light at source-detector separations from 1 mm to 4 mm. To derive tissue hemoglobin concentration and oxygen saturation of hemoglobin the spatial dependence of the measured cw intensities was fitted by a Monte Carlo model. In this model the tissue was assumed to be homogeneous. The scaling factors between measured intensities and simulated photon flux were obtained by applying the same setup to a homogeneous semi-infinite phantom with known optical properties and by performing Monte Carlo simulations for this phantom. To accelerate the fit of the tissue optical properties a look-up table of the simulated reflected intensities was generated for the needed range of absorption and scattering coefficients. The intensities at the three wavelengths were fitted simultaneously using hemoglobin concentration, oxygen saturation, the reduced scattering coefficient at 800 nm and the scatter power coefficient as fit parameters. The method was employed to study the temporal changes of renal hemoglobin concentration and blood oxygenation on an anesthetized rat during a short period of renal ischemia induced by aortic occlusion and during subsequent reperfusion.

Fatigue in Intensive Care Nurses and Related Factors.

PubMed

Çelik, Sevim; Taşdemir, Nurten; Kurt, Aylin; İlgezdi, Ebru; Kubalas, Özge

2017-10-01

Fatigue negatively affects the performance of intensive care nurses. Factors contributing to the fatigue experienced by nurses include lifestyle, psychological status, work organization and sleep problems. To determine the level of fatigue among nurses working in intensive care units and the related factors. This descriptive study was conducted with 102 nurses working in intensive care units in the West Black Sea Region of Turkey. Data were collected between February and May 2014 using a personal information form, the Visual Analogue Scale for Fatigue (VAS-F), the Hospital Anxiety and Depression Scale and the Pittsburg Sleep Quality Index. The intensive care nurses in the study were found to be experiencing fatigue. Significant correlations were observed between scores on the VAS-F Fatigue and anxiety (p=0.01), depression (p=0.002), and sleep quality (p<0.001). Anxiety, depression and quality of sleep were significantly affected by the intensive care nurses' levels of fatigue. These results can be of benefit in taking measures which may be used to reduce fatigue in nurses, especially the fatigue related to work organization and social life.

Intense Exercise Promotes Adult Hippocampal Neurogenesis But Not Spatial Discrimination

PubMed Central

So, Ji H.; Huang, Chao; Ge, Minyan; Cai, Guangyao; Zhang, Lanqiu; Lu, Yisheng; Mu, Yangling

2017-01-01

Hippocampal neurogenesis persists throughout adult life and plays an important role in learning and memory. Although the influence of physical exercise on neurogenesis has been intensively studied, there is controversy in regard to how the impact of exercise may vary with its regime. Less is known about how distinct exercise paradigms may differentially affect the learning behavior. Here we found that, chronic moderate treadmill running led to an increase of cell proliferation, survival, neuronal differentiation, and migration. In contrast, intense running only promoted neuronal differentiation and migration, which was accompanied with lower expressions of vascular endothelial growth factor, brain-derived neurotrophic factor, insulin-like growth factor 1, and erythropoietin. In addition, the intensely but not mildly exercised animals exhibited a lower mitochondrial activity in the dentate gyrus. Correspondingly, neurogenesis induced by moderate but not intense exercise was sufficient to improve the animal’s ability in spatial pattern separation. Our data indicate that the effect of exercise on spatial learning is intensity-dependent and may involve mechanisms other than a simple increase in the number of new neurons. PMID:28197080

The influencing factors of CO2 emission intensity of Chinese agriculture from 1997 to 2014.

PubMed

Long, Xingle; Luo, Yusen; Wu, Chao; Zhang, Jijian

2018-05-01

In China, agriculture produces the greatest chemical oxygen demand (COD) emissions in wastewater and the most methane (CH 4 ) emissions. It is imperative that agricultural pollution in China be reduced. This study investigated the influencing factors of the CO 2 emission intensity of Chinese agriculture from 1997 to 2014. We analyzed the influencing factors of the CO 2 emission intensity through the first-stage least-square regression. We also analyzed determinants of innovation through the second-stage least-square regression. We found that innovation negatively affected the CO 2 emission intensity in the model of the nation. FDI positively affected innovation in China. It is important to enhance indigenous innovation for green agriculture through labor training and collaboration between agriculture and academia.

The intensity-pitch relation revisited: monopolar versus bipolar cochlear stimulation.

PubMed

Arnoldner, Christoph; Riss, Dominik; Kaider, Alexandra; Mair, Alois; Wagenblast, Jens; Baumgartner, Wolf-Dieter; Gstöttner, Wolfgang; Hamzavi, Jafar-Sasan

2008-09-01

The very high speech perception scores now being achieved with cochlear implants have led to demands for similar levels of achievement in music perception and perception in noisy environments. One of the crucial factors in these fields is pitch perception. The aim of the present study was to investigate the extent to which pitch perception is influenced by the intensity of the stimulus, through the use of different stimulation modes (monopolar, bipolar) and different electrodes (lateral and perimodiolar). Sixteen postlingually deafened patients with an average implant use of 3.1 years were included in this study. All patients were using a Cochlear (CI24M, CI24R, CI24RE) cochlear implant. Subjects were asked to compare the pitch of an intensity-constant reference tone with the pitch of a test tone of varying intensity. The test was repeated for apical, mediocochlear, and basal channel locations, and also for monopolar and bipolar stimulation. It was found that in monopolar stimulation 87.5% and in bipolar stimulation 85.7% of the patients perceived a clear pitch change with changing intensity of the stimulus (Spearman correlation coefficients r < -0.3 or r > 0.3, respectively). A total of 73.1% of these patients perceived lower pitches with increasing intensity, 26.9% reported the opposite effect. No statistically significant difference in the intensity-pitch correlation could be found between mono- and bipolar stimulation. Neither the mean dynamic range nor the type of electrode used was found to be related to the correlation coefficient. Although the majority of today's cochlear implant recipients perform well and the intensity-pitch relation in cochlear implant recipients is still poorly understood, rising demands on speech-coding strategies may soon make a compensation of the pitch shifts desirable. Although the results of our study tend to argue against a peripheral mechanism, the exact origin of this phenomenon remains unclear.

Factors determining yield and quality of illicit indoor cannabis (Cannabis spp.) production.

PubMed

Vanhove, Wouter; Van Damme, Patrick; Meert, Natalie

2011-10-10

Judiciary currently faces difficulties in adequately estimating the yield of illicit indoor cannabis plantations. The latter data is required in penalization which is based on the profits gained. A full factorial experiment in which two overhead light intensities, two plant densities and four varieties were combined in the indoor cultivation of cannabis (Cannabis spp.) was used to reveal cannabis drug yield and quality under each of the factor combinations. Highest yield was found for the Super Skunk and Big Bud varieties which also exhibited the highest concentrations of Δ(9)-tetrahydrocannabinol (THC). Results show that plant density and light intensity are additive factors whereas the variety factor significantly interacts with both plant density and light intensity factors. Adequate estimations of yield of illicit, indoor cannabis plantations can only be made if upon seizure all factors considered in this study are accounted for. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Experimental measurement of 12C+16O fusion at stellar energies

NASA Astrophysics Data System (ADS)

Fang, X.; Tan, W. P.; Beard, M.; deBoer, R. J.; Gilardy, G.; Jung, H.; Liu, Q.; Lyons, S.; Robertson, D.; Setoodehnia, K.; Seymour, C.; Stech, E.; Vande Kolk, B.; Wiescher, M.; deSouza, R. T.; Hudan, S.; Singh, V.; Tang, X. D.; Uberseder, E.

2017-10-01

The total cross section of the 12C+16O fusion reaction has been measured at low energies to investigate the role of this reaction during late stellar evolution burning phases. A high-intensity oxygen beam, produced by the 5 MV pelletron accelerator at the University of Notre Dame, impinged on a thick, ultrapure graphite target. Protons and γ rays were simultaneously measured in the center-of-mass energy range from 3.64 to 5.01 MeV for singles and from 3.73 to 4.84 MeV for coincidence events, using silicon and Ge detectors. Statistical model calculations were employed to interpret the experimental results. The emergence of a new resonance-like broad structure and a decreasing trend in the S -factor data towards lower energies (opposite to previous data) are found for the 12C+16O fusion reaction. Based on these results the uncertainty range of the reaction rate within the temperature range of late stellar burning environments is discussed.

Frequency allocations for a new satellite service - Digital audio broadcasting

NASA Technical Reports Server (NTRS)

Reinhart, Edward E.

1992-01-01

The allocation in the range 500-3000 MHz for digital audio broadcasting (DAB) is described in terms of key issues such as the transmission-system architectures. Attention is given to the optimal amount of spectrum for allocation and the technological considerations relevant to downlink bands for satellite and terrestrial transmissions. Proposals for DAB allocations are compared, and reference is made to factors impinging on the provision of ground/satellite feeder links. The allocation proposals describe the implementation of 50-60-MHz bandwidths for broadcasting in the ranges near 800 MHz, below 1525 MHz, near 2350 MHz, and near 2600 MHz. Three specific proposals are examined in terms of characteristics such as service areas, coverage/beam, channels/satellite beam, and FCC license status. Several existing problems are identified including existing services crowded with systems, the need for new bands in the 1000-3000-MHz range, and variations in the nature and intensity of implementations of existing allocations that vary from country to country.

C-Phycocyanin Hydration Water Dynamics in the Presence of Trehalose: An Incoherent Elastic Neutron Scattering Study at Different Energy Resolutions

PubMed Central

Gabel, Frank; Bellissent-Funel, Marie-Claire

2007-01-01

We present a study of C-phycocyanin hydration water dynamics in the presence of trehalose by incoherent elastic neutron scattering. By combining data from two backscattering spectrometers with a 10-fold difference in energy resolution we extract a scattering law S(Q,ω) from the Q-dependence of the elastic intensities without sampling the quasielastic range. The hydration water is described by two dynamically different populations—one diffusing inside a sphere and the other diffusing quasifreely—with a population ratio that depends on temperature. The scattering law derived describes the experimental data from both instruments excellently over a large temperature range (235–320 K). The effective diffusion coefficient extracted is reduced by a factor of 10–15 with respect to bulk water at corresponding temperatures. Our approach demonstrates the benefits and the efficiency of using different energy resolutions in incoherent elastic neutron scattering over a large angular range for the study of biological macromolecules and hydration water. PMID:17350998

Influence of load interactions on crack growth as related to state of stress and crack closure

NASA Technical Reports Server (NTRS)

Telesman, J.

1985-01-01

Fatigue crack propagation (FCP) after an application of a low-high loading sequence was investigated as a function of specimen thickness and crack closure. No load interaction effects were detected for specimens in a predominant plane strain state. However, for the plane stress specimens, initially high FCP rates after transition to a higher stress intensity range were observed. The difference in observed behavior was explained by examining the effect of the resulting closure stress intensity values on the effective stress intensity range.

Ecosystem Carbon Storage in Alpine Grassland on the Qinghai Plateau

PubMed Central

Liu, Shuli; Zhang, Fawei; Du, Yangong; Guo, Xiaowei; Lin, Li; Li, Yikang; Li, Qian; Cao, Guangmin

2016-01-01

The alpine grassland ecosystem can sequester a large quantity of carbon, yet its significance remains controversial owing to large uncertainties in the relative contributions of climate factors and grazing intensity. In this study we surveyed 115 sites to measure ecosystem carbon storage (both biomass and soil) in alpine grassland over the Qinghai Plateau during the peak growing season in 2011 and 2012. Our results revealed three key findings. (1) Total biomass carbon density ranged from 0.04 for alpine steppe to 2.80 kg C m-2 for alpine meadow. Median soil organic carbon (SOC) density was estimated to be 16.43 kg C m-2 in alpine grassland. Total ecosystem carbon density varied across sites and grassland types, from 1.95 to 28.56 kg C m-2. (2) Based on the median estimate, the total carbon storage of alpine grassland on the Qinghai Plateau was 5.14 Pg, of which 94% (4.85 Pg) was soil organic carbon. (3) Overall, we found that ecosystem carbon density was affected by both climate and grazing, but to different extents. Temperature and precipitation interaction significantly affected AGB carbon density in winter pasture, BGB carbon density in alpine meadow, and SOC density in alpine steppe. On the other hand, grazing intensity affected AGB carbon density in summer pasture, SOC density in alpine meadow and ecosystem carbon density in alpine grassland. Our results indicate that grazing intensity was the primary contributing factor controlling carbon storage at the sites tested and should be the primary consideration when accurately estimating the carbon storage in alpine grassland. PMID:27494253

Ecosystem Carbon Storage in Alpine Grassland on the Qinghai Plateau.

PubMed

Liu, Shuli; Zhang, Fawei; Du, Yangong; Guo, Xiaowei; Lin, Li; Li, Yikang; Li, Qian; Cao, Guangmin

2016-01-01

The alpine grassland ecosystem can sequester a large quantity of carbon, yet its significance remains controversial owing to large uncertainties in the relative contributions of climate factors and grazing intensity. In this study we surveyed 115 sites to measure ecosystem carbon storage (both biomass and soil) in alpine grassland over the Qinghai Plateau during the peak growing season in 2011 and 2012. Our results revealed three key findings. (1) Total biomass carbon density ranged from 0.04 for alpine steppe to 2.80 kg C m-2 for alpine meadow. Median soil organic carbon (SOC) density was estimated to be 16.43 kg C m-2 in alpine grassland. Total ecosystem carbon density varied across sites and grassland types, from 1.95 to 28.56 kg C m-2. (2) Based on the median estimate, the total carbon storage of alpine grassland on the Qinghai Plateau was 5.14 Pg, of which 94% (4.85 Pg) was soil organic carbon. (3) Overall, we found that ecosystem carbon density was affected by both climate and grazing, but to different extents. Temperature and precipitation interaction significantly affected AGB carbon density in winter pasture, BGB carbon density in alpine meadow, and SOC density in alpine steppe. On the other hand, grazing intensity affected AGB carbon density in summer pasture, SOC density in alpine meadow and ecosystem carbon density in alpine grassland. Our results indicate that grazing intensity was the primary contributing factor controlling carbon storage at the sites tested and should be the primary consideration when accurately estimating the carbon storage in alpine grassland.

Achieving sub-millimetre precision with a solid-state full-field heterodyning range imaging camera

NASA Astrophysics Data System (ADS)

Dorrington, A. A.; Cree, M. J.; Payne, A. D.; Conroy, R. M.; Carnegie, D. A.

2007-09-01

We have developed a full-field solid-state range imaging system capable of capturing range and intensity data simultaneously for every pixel in a scene with sub-millimetre range precision. The system is based on indirect time-of-flight measurements by heterodyning intensity-modulated illumination with a gain modulation intensified digital video camera. Sub-millimetre precision to beyond 5 m and 2 mm precision out to 12 m has been achieved. In this paper, we describe the new sub-millimetre class range imaging system in detail, and review the important aspects that have been instrumental in achieving high precision ranging. We also present the results of performance characterization experiments and a method of resolving the range ambiguity problem associated with homodyne and heterodyne ranging systems.

[Risk for the development of upper gastrointestinal bleeding in children in an intensive care unit].

PubMed

Gutiérrez-Gutiérrez, Glenda Karina; Villasís-Keever, Miguel Angel; González-Ortiz, Beatriz; Troconis-Trens, Germán; Tapia-Monge, Dora María; Flores-Calderón, Judith

2014-01-01

Although gastrointestinal tract bleeding can occur at any age, most studies trying to establish causes or risk factors for its development have been conducted in adults. The aim of this study was to determine risk factors in children admitted in a pediatric intensive care unit. A retrospective case-control study was conducted. Children who developed upper gastrointestinal bleeding children during their stay at the intensive care unit were considered the cases. Variables were obtained from medical records including age, sex, nutritional status, mechanical ventilation, use of nasogastric tube, development of complications, presence of coagulopathy, use of prophylaxis for upper gastrointestinal tract bleeding, fasting and use of steroids. Using a multivariate analysis, risk factors were identified, with odds ratios (OR) and 95 % confidence intervals (95 % CI) calculations. Out of 165 patients, 58 had upper gastrointestinal bleeding (35 %). Risk factors identified were prolonged clotting times (OR = 3.35), thrombocytopenia (OR = 2.39), development of sepsis (OR = 6.74) or pneumonia (OR = 4.37). Prophylaxis for upper gastrointestinal bleeding was not a protective factor. Upper gastrointestinal bleeding frequency in children hospitalized in an intensive care unit was high. Identifying risk factors should help to reduce upper gastrointestinal bleeding frequency.

33 CFR 86.05 - Sound signal intensity and range of audibility.

Code of Federal Regulations, 2011 CFR

2011-07-01

... direction of the forward axis of the whistle and at a distance of 1 meter from it, a sound pressure level in... 33 Navigation and Navigable Waters 1 2011-07-01 2011-07-01 false Sound signal intensity and range... HOMELAND SECURITY INLAND NAVIGATION RULES ANNEX III: TECHNICAL DETAILS OF SOUND SIGNAL APPLIANCES Whistles...

Determination of pain intensity risk factors among school children with nonspecific low back pain.

PubMed

Akdag, Beyza; Cavlak, Ugur; Cimbiz, Ali; Camdeviren, Handan

2011-02-01

Low back pain (LBP) is a common disease among people under the age of 20. To the best of our knowledge few studies have been carried out on LBP among school children in Turkey, and none of them studied the correlation between pain intensity and related variables with LBP. This cross-sectional study was carried out to investigate the risk factors and their correlations with pain intensity among 222 school children (106 girls and 116 boys) aged 10-18 years in the city of Denizli. A self-reported questionnaire was used to collect the data. The regression tree method (RTM) was used to determine the risk factors by using the STATISTICA program package. Pain intensity was the outcome variable, and 8 independent variables (body mass index (BMI), sex, regular exercise habit, studying posture, transportation to/from school, duration of studying, bag handling, and type of bed) were used to detect their effect on pain intensity. The results showed that pain intensity is significantly affected by 4 independent variables: duration of studying, type of bed, transportation to/from school, and BMI. The overall mean and standard deviation of pain intensity was 2.58 ± 0.86 (minimum=1, maximum=5). Results from the literature, as well as our study, show that taking parents' and teachers' concerns seriously is of vital importance. Our results indicate that parents and teachers should be informed about duration of studying, type of bed, transportation and obesity as risk factors predicting NLBP in school children.

Stress-Intensity Factors for Elliptical Cracks Emanating from Countersunk Rivet Holes

DOT National Transportation Integrated Search

1998-04-01

Small cracks developing from rivet holes in lap joints of fuselage structure have been an issue of concern over the past decade. Stress-intensity factor solutions required to assess the structural integrity of such configurations are lacking. To addr...

Structural and impurity phase transitions of LiNaSO4:RE probed using cathodo-thermoluminescence

NASA Astrophysics Data System (ADS)

Maghrabi, M.; Finch, A. A.; Townsend, P. D.

2008-11-01

Spectrally resolved cathodo-thermoluminescence spectra of rare earth (RE) doped LiNaSO4 measured from 20 to 673 K reveal several anomalies in the RE emission lines and intensities. The low (20-300 K) temperature data show a discontinuous change in intensity at ~170 K that is either a marked intensity enhancement or a drop truncating the entire spectrum. Such an effect on the host luminescence has previously been assigned to a transition between cubic and hexagonal polymorphs of ice nanoparticle inclusions. Similar, but less profound anomalies are seen above room temperature (300-673 K) where the changes take the form of either a discontinuity in intensity at ~480 K or reduced intensity in the range 430-530 K. There are changes in the relative intensities of different emission lines of the same dopant in this temperature range. Such high temperature variations are ascribed to structural phase changes within the LiNaSO4 crystals. The behaviours may result from Li-poor surfaces or twin boundaries behaving like Na2SO4. This phase change is suggested in the open literature for LiNaSO4 but not yet fully documented, perhaps because the effects span a wide range of temperatures or due to experimental features inherent in most luminescence facilities.

The Response of Farmland Bird Communities to Agricultural Intensity as Influenced by Its Spatial Aggregation

PubMed Central

Teillard, Félix; Jiguet, Frédéric; Tichit, Muriel

2015-01-01

The shape of the relationship between biodiversity and agricultural intensity determines the range of intensities that should be targeted by conservation policies to obtain the greatest environmental benefits. Although preliminary evidence of this relationship exists, the influence of the spatial arrangement of intensity on biodiversity remains untested. We conducted a nationwide study linking agricultural intensity and its spatial arrangement to a farmland bird community of 22 species. Intensity was described with a continuous indicator based on Input Cost per hectare, which was relevant for both livestock and crop production. We used the French Breeding Bird Survey to compute several descriptors of the farmland bird community along the intensity gradient and tested for the significance of an interaction effect between intensity and its spatial aggregation on these descriptors. We found that the bird community was comprised of both winner and loser species with regard to intensity. The community composition descriptors (trophic level, specialisation, and specialisation for grassland indices) displayed non-linear relationships to intensity, with steeper slopes in the lower intensity range. We found a significant interaction effect between intensity and its spatial aggregation on the grassland specialisation index of the bird community; the effect of agricultural intensity was strengthened by its spatial aggregation. We suggest that an opportunity to improve the effectiveness of conservation policies exists by targeting measures in areas where intensity is moderate to low and aggregated. The effect of the aggregation of agricultural intensity on biodiversity should be considered in other scales and taxa when developing optimal policy targeting and intensity allocation strategies. PMID:25799552

Prototype fiber Bragg Grattings (FBG) sensor based on intensity modulation of the laser diode low frequency vibrations measurement

NASA Astrophysics Data System (ADS)

Setiono, Andi; Ula, Rini Khamimatul; Hanto, Dwi; Widiyatmoko, Bambang; Purnamaningsih, Retno Wigajatri

2016-02-01

In general, Fiber Bragg Grating (FBG) sensor works based on observation of spectral response characteristic to detect the desired parameter. In this research, we studied intensity response characteristic of FBG to detect the dynamic strain. Experiment result show that the reflected intensity had linier relationships with dynamic strain. Based on these characteristics, we developed the FBG sensor to detect low frequency vibration. This sensor is designed by attaching the FBG on the bronze cantilever with dimensions of 85×3×0.5 mm. Measurement results showed that the sensor was able to detect vibrations in the frequency range of 7-10 Hz at temperature range of 25-45 ˚C. The measured frequency range is still within the frequency range of digging activity, therefore this vibration sensor can be applied for oil pipelines vandalisation detection system.

Intensive chemotherapy plus recombinant human granulocyte-colony stimulating factor support for distant metastatic nasopharyngeal carcinoma. A preliminary report.

PubMed

Wang, C H; Wang, H M; Chen, J S; Chang, W J; Lai, G M

1997-01-01

Nasopharyngeal carcinoma (NPC) has been shown to be highly responsive to chemotherapy. The major limiting toxicity was myelotoxicity. Recently, the role of granulocyte colony-stimulating factor (G-CSF) in reducing chemotherapy-induced neutropenic sepsis has been well established. In this study, we tested whether recombinant human G-CSF (rhG-CSF) could effectively support the bone marrow function in both previously untreated and pretreated metastatic NPC patients receiving intensive chemotherapy. Twelve patients with distant metastatic disease, 5 newly diagnosed (group A) and 7 pretreated patients (group B), were enrolled to receive BEC (bleomycin, epirubicin and cisplatin), followed by rhG-CSF support (50 microg/m2 s.c. daily for 10 days) every 4 weeks for two cycles. Four patients in group A completed the treatment as scheduled while only 2 patients in group B did. After the first treatment cycle, 6 patients (50%) had grade III-IV myelosuppression. Five of the patients were from group B. The mean values of the white cell count nadir were 2,680 (range 1,200-3,700) in group A and 1,343 (range 400-2,900) in group B (p = 0.0386). Neutropenia-associated fever occurred in 7 patients, 6 of whom had received previous treatment. There were 2 deaths due to toxicity, and both patients had liver metastases within 6 months following radiation. After 24 months of follow-up, only 1 patient is still alive. Our preliminary results suggest that in previously treated metastatic NPC patients, bone marrow suppression is still the major limiting toxic side effect of aggressive chemotherapy, especially for those patients with liver recurrences within 6 months after irradiation and despite rhG-CSF support.

Patterns of failure and survival in patients with nasopharyngeal carcinoma treated with intensity-modulated radiation therapy in Saudi Arabia.

PubMed

Maklad, Ahmed Marzouk; Bayoumi, Yasser; Senosy Hassan, Mohamed Abdalazez; Elawadi, AbuSaleh A; AlHussain, Hussain; Elyamany, Ashraf; Aldhahri, Saleh F; Al-Qahtani, Khalid Hussain; AlQahtani, Mubarak; Tunio, Mutahir A

2016-01-01

We aimed to investigate the patterns of failure (locoregional and distant metastasis), associated factors, and treatment outcomes in nasopharyngeal carcinoma patients treated with intensity-modulated radiation therapy (IMRT) combined with chemotherapy. From April 2006 to December 2011, 68 nasopharyngeal carcinoma patients were treated with IMRT and chemotherapy at our hospital. Median radiation doses delivered to gross tumor volume and positive neck nodes were 66-70 Gy, 63 Gy to clinical target volume, and 50.4-56 Gy to clinically negative neck. The clinical toxicities, patterns of failures, locoregional control, distant metastasis control, disease-free survival, and overall survival were observed. The median follow-up time was 52.2 months (range: 11-87 months). Epstein-Barr virus infection was positive in 63.2% of patients. Overall disease failure developed in 21 patients, of whom 85.8% belonged to stage III/IV disease. Among these, there were seven locoregional recurrences, three regional recurrences with distant metastases, and eleven distant metastases. The median interval from the date of diagnosis to failure was 26.5 months (range: 16-50 months). Six of ten (60%) locoregional recurrences were treated with reirradiation ± concurrent chemotherapy. The 5-year locoregional control, distant metastasis control, disease-free survival, and overall survival rates of whole cohort were 81.1%, 74.3%, 60.1%, and 73.4%, respectively. Cox regression analyses revealed that neoadjuvant chemotherapy, age, and Epstein-Barr virus were independent predictors for disease-free survival. Neoadjuvant chemotherapy followed by IMRT with or without chemotherapy improves the long-term survival of Saudi patients with nasopharyngeal carcinoma. Distant metastasis was the main pattern of treatment failure. Neoadjuvant chemotherapy, age, and Epstein-Barr virus status before IMRT were important independent prognostic factors.

Soil Greenhouse Gas Fluxes, Environmental Controls, and the Partitioning of N2O Sources in UK Natural and Seminatural Land Use Types

NASA Astrophysics Data System (ADS)

Sgouridis, Fotis; Ullah, Sami

2017-10-01

Natural and seminatural terrestrial ecosystems (unmanaged peatlands and forests and extensive and intensive grasslands) have been under-represented in the UK greenhouse gas (GHG) inventory. Mechanistic studies of GHG fluxes and their controls can improve the prediction of the currently uncertain GHG annual emission estimates. The source apportionment of N2O emissions can further inform management plans for GHG mitigation. We have measured in situ GHG fluxes monthly in two replicated UK catchments and evaluated their environmental controlling factors. An adapted 15N-gas flux method with low addition of 15N tracer (0.03-0.5 kg 15N ha-1) was used to quantify the relative contribution of denitrification to net N2O production. Total N2O fluxes were 40 times higher in the intensive grasslands than in the peatlands (range: -1.32 to 312.3 μg N m-2 h-1). The contribution of denitrification to net N2O emission varied across the land use types and ranged from 9 to 60%. Soil moisture was the key parameter regulating the partitioning of N2O sources (r2 = 0.46). Total N2O fluxes were explained by a simple model (r2 = 0.83) including parameters such as total dissolved nitrogen, organic carbon, and water content. A parsimonious model with the soil moisture content as a single scalar parameter explained 84% of methane flux variability across land uses. The assumption that 1% of the atmospherically deposited N on natural ecosystems is emitted as N2O could be overestimated or underestimated (0.3-1.6%). The use of land use-specific N2O emission factors and further information on N2O source partitioning should help constrain this uncertainty.

Long-term follow-up of endocrine function among young children with newly diagnosed malignant central nervous system tumors treated with irradiation-avoiding regimens.

PubMed

Cochrane, Anne M; Cheung, Clement; Rangan, Kasey; Freyer, David; Nahata, Leena; Dhall, Girish; Finlay, Jonathan L

2017-11-01

The adverse effects of irradiation on endocrine function among patients with pediatric brain tumor are well documented. Intensive induction chemotherapy followed by marrow-ablative chemotherapy with autologous hematopoietic cell rescue (AuHCR) without central nervous system (CNS) irradiation has demonstrated efficacy in a proportion of very young children with some malignant CNS tumors. This study assessed the long-term endocrine function of young children following chemotherapy-only treatment regimens. A retrospective chart review was performed on 99 patients under 6 years of age with malignant brain tumors newly diagnosed between May 1991 and October 2010 treated with irradiation-avoiding strategies. Thirty patients survived post-AuHCR without cranial irradiation for a mean of 8.1 years (range 3.0-22.25 years). The patient cohort included 18 males and 12 females (mean age at AuHCR of 2.5 years, range 0.8-5.1 years). All 30 surviving patients had documented normal age-related thyroid function, insulin-like growth factor binding protein 3 (IGF-BP3), prolactin, testosterone, and estradiol levels. Insulin-like growth factor 1 age-related levels were abnormal in one child with normal height. Ninety-seven percent of patients had normal cortisol levels, while follicle-stimulating hormone and LH levels among females were normal in 83% and 92%, respectively, and in 100% of males. Growth charts demonstrated age-associated growth within 2 standard deviations of the mean in 67% of patients. Of 10 patients (33%) with short stature, 6 had proportional diminutions in both height and weight. These findings demonstrate that the use of relatively brief, intensive chemotherapy regimens including marrow-ablative chemotherapy with AuHCR results in fewer endocrine sequelae than treatment schemes utilizing CNS irradiation. © 2017 Wiley Periodicals, Inc.

Reactor Pressure Vessel Fracture Analysis Capabilities in Grizzly

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spencer, Benjamin; Backman, Marie; Chakraborty, Pritam

2015-03-01

Efforts have been underway to develop fracture mechanics capabilities in the Grizzly code to enable it to be used to perform deterministic fracture assessments of degraded reactor pressure vessels (RPVs). Development in prior years has resulted a capability to calculate -integrals. For this application, these are used to calculate stress intensity factors for cracks to be used in deterministic linear elastic fracture mechanics (LEFM) assessments of fracture in degraded RPVs. The -integral can only be used to evaluate stress intensity factors for axis-aligned flaws because it can only be used to obtain the stress intensity factor for pure Mode Imore » loading. Off-axis flaws will be subjected to mixed-mode loading. For this reason, work has continued to expand the set of fracture mechanics capabilities to permit it to evaluate off-axis flaws. This report documents the following work to enhance Grizzly’s engineering fracture mechanics capabilities for RPVs: • Interaction Integral and -stress: To obtain mixed-mode stress intensity factors, a capability to evaluate interaction integrals for 2D or 3D flaws has been developed. A -stress evaluation capability has been developed to evaluate the constraint at crack tips in 2D or 3D. Initial verification testing of these capabilities is documented here. • Benchmarking for axis-aligned flaws: Grizzly’s capabilities to evaluate stress intensity factors for axis-aligned flaws have been benchmarked against calculations for the same conditions in FAVOR. • Off-axis flaw demonstration: The newly-developed interaction integral capabilities are demon- strated in an application to calculate the mixed-mode stress intensity factors for off-axis flaws. • Other code enhancements: Other enhancements to the thermomechanics capabilities that relate to the solution of the engineering RPV fracture problem are documented here.« less

Evidence of effects of human disturbance on alert response in Père David's deer (Elaphurus davidianus).

PubMed

Li, Chunwang; Jiang, Zhigang; Tang, Songhua; Zeng, Yan

2007-11-01

To understand effects of human disturbance on alert response of Père David's deer, we carried out an experiment in the Dafeng Père David's Deer Reserve (32 degrees 59'-33 degrees 03'N, 120 degrees 47'-120 degrees 53'E), China. In the spring and summer, we observed alert responses (including stare, walking away, and flee) of deer and recorded the intensity of tourist disturbance in a small display pen using a laser-range finder to measure the alert distance of a free-ranging group in a large enclosure. We also recorded the pattern of head orientation when deer were resting in these two deer groups. After statistical analysis, we found that: 1) in small pen, the frequency of alert response was significantly different among different intensities of human disturbance; strong disturbance resulted in higher frequency of alert response; 2) stare distance in the free-ranging group in summer was significantly longer than that in spring, but the distance of walking away and the distance of flee showed no significant difference between the two seasons; and 3) in free-ranging group, there was no significant directional difference in head orientation, whereas in display group, there was a significant directional difference in head orientation. We suggest that: 1) under the captive situation, human disturbance may be one of the factors that affect alert response in Père David's deer; and 2) Père David's deer adopted different alert response to adapt to human disturbance under different circumstance. We recommended that relationships between alert response and human disturbance should be considered in ex situ conservation of this field extinct deer. Zoo Biol 26:461-470, 2007. (c) 2007 Wiley-Liss, Inc.

Soreness during non-music activities is associated with playing-related musculoskeletal problems: an observational study of 731 child and adolescent instrumentalists.

PubMed

Ranelli, Sonia; Straker, Leon; Smith, Anne

2014-06-01

Is exposure to non-music-related activities associated with playing-related musculoskeletal problems in young instrumentalists? Is non-music-activity-related soreness associated with playing-related musculoskeletal problems in this group of instrumentalists? Observational study using a questionnaire and physical measures. 859 instrumentalists aged 7 to 17 years from the School of Instrumental Music program. Of the 731 respondents who completed the questionnaire adequately, 412 (56%) experienced instrument-playing problems; 219 (30%) had symptoms severe enough to interfere with normal playing. Children commonly reported moderate exposure to non-music-related activities, such as watching television (61%), vigorous physical activity (57%), writing (51%) and computer use (45%). Greater exposure to any non-music activity was not associated with playing problems, with odds ratios ranging from 1.01 (95% CI 0.7 to 1.5) for watching television to 2.08 (95% CI 0.5 to 3.3) for intensive hand activities. Four hundred and seventy eight (65%) children reported soreness related to non-music activities, such as vigorous physical activity (52%), writing (40%), computer use (28%), intensive hand activities (22%), electronic game use (17%) and watching television (15%). Non-music-activity-related soreness was significantly associated with instrument playing problems, adjusting for gender and age, with odds ratios ranging from 2.6 (95% CI 1.7 to 3.9) for soreness whilst watching television, to 4.3 (95% CI 2.6 to 7.1) for soreness during intensive hand activities. Non-music-activity-related soreness co-occurs significantly with playing problems in young instrumentalists. The finding of significant co-occurrence of music and non-music-related soreness in respondents in this study suggests that intervention targets for young instrumentalists could include risk factors previously identified in the general child and adolescent population, as well as music-specific risk factors. This is an important consideration for the assessment and management of the musculoskeletal health of young musicians. Copyright © 2014. Published by Elsevier B.V.

Effect of Exercise Intensity on Neurotrophic Factors and Blood-Brain Barrier Permeability Induced by Oxidative-Nitrosative Stress in Male College Students.

PubMed

Roh, Hee-Tae; Cho, Su-Youn; Yoon, Hyung-Gi; So, Wi-Young

2017-06-01

We investigated the effects of aerobic exercise intensity on oxidative-nitrosative stress, neurotrophic factor expression, and blood-brain barrier (BBB) permeability. Fifteen healthy men performed treadmill running under low-intensity (LI), moderate-intensity (MI), and high-intensity (HI) conditions. Blood samples were collected immediately before exercise (IBE), immediately after exercise (IAE), and 60 min after exercise (60MAE) to examine oxidative-nitrosative stress (reactive oxygen species [ROS]; nitric oxide [NO]), neurotrophic factors (brain-derived neurotrophic factor [BDNF]; nerve growth factor [NGF]), and blood-brain barrier (BBB) permeability (S-100β; neuron-specific enolase). ROS concentration significantly increased IAE and following HI (4.9 ± 1.7 mM) compared with that after LI (2.8 ± 1.4 mM) exercise (p < .05). At 60MAE, ROS concentration was higher following HI (2.5 ± 1.2 mM) than after LI (1.5 ± 0.5 mM) and MI (1.4 ± 0.3 mM) conditions (p < .05). Plasma NO IAE increased significantly after MI and HI exercise (p < .05). Serum BDNF, NGF, and S-100b levels were significantly higher IAE following MI and HI exercise (p < .05). BDNF and S-100b were higher IAE following MI (29.6 ± 3.4 ng/mL and 87.1 ± 22.8 ng/L, respectively) and HI (31.4 ± 3.8 ng/mL and 100.6 ± 21.2 ng/L, respectively) than following LI (26.5 ± 3.0 ng/mL and 64.8 ± 19.2 ng/L, respectively) exercise (p < .05). 60MAE, S-100b was higher following HI (71.1 ± 14.5 ng/L) than LI (56.2 ± 14.7 ng/L) exercise (p < .05). NSE levels were not significantly different among all intensity conditions and time points (p > .05). Moderate- and/or high-intensity exercise may induce higher oxidative-nitrosative stress than may low-intensity exercise, which can increase peripheral neurotrophic factor levels by increasing BBB permeability.

Concept and properties of an infrared hybrid single-beam spectrum and its application to eliminate solvent bands and other background interferences.

PubMed

Chen, Yujing; Wang, Hai-Shui; Morisawa, Yusuke; Ozaki, Yukihiro

2014-02-01

For infrared (IR) spectral measurements, if a quality single-beam background spectrum with desired intensity could be obtained, the contributions from solvent and other background components could be completely suppressed and their bands would not appear in a final transmittance/absorbance spectrum. In order to achieve this ideal but difficult goal, the concept of hybrid single-beam spectrum is introduced in this paper. The hybrid single-beam spectrum (φ h) is defined as a mixture of two single-beam spectra (φ b1 and φ b2) of the same sample but with different pathlengths (b1 and b2), namely, φ h = αφ b1+(1-α)φ b2, where α (0 ≤ α ≤ 1) is the component factor. The properties of the hybrid spectrum have been investigated. Under conditions of b2 > b1 ≥ 0.7 b2 and A max ≤ 0.60 (Amax is the maximum absorbance of b2 sample in the spectral range of interest), all the synthesized hybrid spectra are free from significant distortion regardless of the component factor. Therefore, the hybrid single-beam spectrum with desired intensity can be easily obtained simply by choosing an appropriate component factor. The proposed methodology has been demonstrated experimentally by the complete removal of the interference from the atmospheric water vapor and solvent. © 2013 Elsevier B.V. All rights reserved.

What controls stemflow? A LiDAR-based investigation of individual tree canopy structure, neighborhood conditions, and meteorological factors

NASA Astrophysics Data System (ADS)

Yankine, S. A.; Van Stan, J. T., II; Mesta, D. C.; Côté, J. F.; Hildebrandt, A.; Friesen, J.; Maldonado, G.

2017-12-01

Stemflow is a pointed hydrologic flux at the base of tree stems that has been linked to a host of biogeochemical processes in vegetated landscapes. Much work has been done to examine controls over stemflow water yield, finding three major factors: individual tree canopy structure, meteorological variables, and neighborhood conditions. However, the authors are unaware of any study to directly quantify all factors using a combination of terrestrial LiDAR and micrometeorological monitoring methods. This study directly quantifies individual Pinus palustris tree canopy characteristics (trunk volume and angle, branch volume and angle from 1st-to-3rd order, bark roughness, and height), 10-m radius neighborhood properties (number of trees, mean diameter and height, mean distance from study tree, and canopy overlap), and above-canopy storm conditions (magnitude, intensity, mean/max wind speed, and vapor pressure deficit) directly at the site. Stemflow production was 1% of rainfall, ranging from 0.3-59 L per storm from individual trees. Preliminary findings from storms (5-176 mm in magnitude) indicate that all individual tree characteristics, besides bark roughness, have little influence on stemflow generation. Bark roughness altered stemflow generation by affecting trunk water storage (0.1-0.7 mm) and wet trunk evaporation rates (0.005-0.03 mm/h). The strongest influence over stemflow generation from individual trees was the interaction between neighborhood characteristics and meteorological conditions (primarily rainfall amount and, secondarily, rainfall intensity).

Development and psychometric evaluation of the Thirst Distress Scale for patients with heart failure.

PubMed

Waldréus, Nana; Jaarsma, Tiny; van der Wal, Martje Hl; Kato, Naoko P

2018-03-01

Patients with heart failure can experience thirst distress. However, there is no instrument to measure this in patients with heart failure. The aim of the present study was to develop the Thirst Distress Scale for patients with Heart Failure (TDS-HF) and to evaluate psychometric properties of the scale. The TDS-HF was developed to measure thirst distress in patients with heart failure. Face and content validity was confirmed using expert panels including patients and healthcare professionals. Data on the TDS-HF was collected from patients with heart failure at outpatient heart failure clinics and hospitals in Sweden, the Netherlands and Japan. Psychometric properties were evaluated using data from 256 heart failure patients (age 72±11 years). Concurrent validity of the scale was assessed using a thirst intensity visual analogue scale. Patients did not have any difficulties answering the questions, and time taken to answer the questions was about five minutes. Factor analysis of the scale showed one factor. After psychometric testing, one item was deleted. For the eight item TDS-HF, a single factor explained 61% of the variance and Cronbach's alpha was 0.90. The eight item TDS-HF was significantly associated with the thirst intensity score ( r=0.55, p<0.001). Regarding test-retest reliability, the intraclass correlation coefficient was 0.88, and the weighted kappa values ranged from 0.29-0.60. The eight-item TDS-HF is valid and reliable for measuring thirst distress in patients with heart failure.

[Does open access publishing increase the impact of scientific articles? An empirical study in the field of intensive care medicine].

PubMed

Riera, M; Aibar, E

2013-05-01

Some studies suggest that open access articles are more often cited than non-open access articles. However, the relationship between open access and citations count in a discipline such as intensive care medicine has not been studied to date. The present article analyzes the effect of open access publishing of scientific articles in intensive care medicine journals in terms of citations count. We evaluated a total of 161 articles (76% being non-open access articles) published in Intensive Care Medicine in the year 2008. Citation data were compared between the two groups up until April 30, 2011. Potentially confounding variables for citation counts were adjusted for in a linear multiple regression model. The median number (interquartile range) of citations of non-open access articles was 8 (4-12) versus 9 (6-18) in the case of open access articles (p=0.084). In the highest citation range (>8), the citation count was 13 (10-16) and 18 (13-21) (p=0.008), respectively. The mean follow-up was 37.5 ± 3 months in both groups. In the 30-35 months after publication, the average number (mean ± standard deviation) of citations per article per month of non-open access articles was 0.28 ± 0.6 versus 0.38 ± 0.7 in the case of open access articles (p=0.043). Independent factors for citation advantage were the Hirsch index of the first signing author (β=0.207; p=0.015) and open access status (β=3.618; p=0.006). Open access publishing and the Hirsch index of the first signing author increase the impact of scientific articles. The open access advantage is greater for the more highly cited articles, and appears in the 30-35 months after publication. Copyright © 2012 Elsevier España, S.L. and SEMICYUC. All rights reserved.

"Tap and twist": preventing deep vein thrombosis in neuroscience patients through foot and ankle range-of-motion exercises.

PubMed

Palamone, Janet; Brunovsky, Susan; Groth, Matt; Morris, Linda; Kwasny, Mary

2011-12-01

Neurosurgical patients tend to have the highest rate of deep vein thrombosis (DVT) rate among other postsurgical patients. The methods and timing of DVT prevention and treatment continue to be debated among neurointensivists. The greatest opportunity to intervene is early during the stay in the intensive care unit. There are many factors, however, that can make this the most neglected time for aggressive prevention measures. For large university teaching hospitals, the target of the University Health System Consortium is to achieve an average DVT rate at or below half that of previous reported rates. The current recommendations are effective only if there is compliance with these measures during the majority of the patients' hospitalization. Our hypothesis states that without changing any of the current measures to prevent DVT, a structured program of foot and ankle range-of-motion (ROM) exercises will decrease the incidence of DVT in the neuroscience intensive care patient population. This quasi-experimental study was a quality improvement project examining 315 individuals over the age of 18 years, who were admitted to the neurospine intensive care unit and who received a new program of foot exercises as a method of DVT prevention. Data for the outcome measures were derived from bedside measurement of lower extremity doppler, the percentage of time the exercises were performed, patient history, and standard DVT prevention measures. Overall, there was no difference in DVT rates for those receiving the foot ROM intervention during the study period in 2008-2009 compared with the usual nursing practice for the previous year. However, during the study period, those who developed DVT had a significantly lower compliance rate with the ROM exercises (38.7%) than did those who did not develop DVT (58.4%; p < .001). Therefore, foot and ankle ROM exercises may have a promising role in reducing the incidence of DVT in neuroscience intensive care patients when there is diligent performance of the exercises.

Broadband plasmonic-enhanced forward and backward multiplex coherent anti-Stokes Raman scattering microscopy

NASA Astrophysics Data System (ADS)

Guo, Baoshan; Jiang, Lan; Hua, Yanhong; Li, Xin; Cui, Tianhong; Lu, Yongfeng

2018-03-01

Coherent anti-Stokes Raman scattering (CARS) microscopy is an attractive technique for label-free biochemical-specific characterization of biological specimens. However, it has very low sensitivity in monitoring and imaging molecules present in extremely low concentrations or at fast speeds. To improve this sensitivity, especially for multiplex CARS, the intensity of the pump beam and broadband Stokes beam should be enhanced simultaneously. Therefore, the gold shell particle and gold surface are demonstrated to enhance the forward and backward CARS, respectively. Results show that a signal enhancement factor of ˜25,000 can be achieved for the gold surface and an even higher enhancement factor can be achieved for the gold shell particles. Thus, we can obtain an enhanced CARS signal in a broad spectral range, which will substantially improve the detection sensitivity of hyperspectral CARS spectroscopy and imaging.

Monte Carlo modeling of fluorescence in semi-infinite turbid media

NASA Astrophysics Data System (ADS)

Ong, Yi Hong; Finlay, Jarod C.; Zhu, Timothy C.

2018-02-01

The incident field size and the interplay of absorption and scattering can influence the in-vivo light fluence rate distribution and complicate the absolute quantification of fluorophore concentration in-vivo. In this study, we use Monte Carlo simulations to evaluate the effect of incident beam radius and optical properties to the fluorescence signal collected by isotropic detector placed on the tissue surface. The optical properties at the excitation and emission wavelengths are assumed to be identical. We compute correction factors to correct the fluorescence intensity for variations due to incident field size and optical properties. The correction factors are fitted to a 4-parameters empirical correction function and the changes in each parameter are compared for various beam radius over a range of physiologically relevant tissue optical properties (μa = 0.1 - 1 cm-1 , μs'= 5 - 40 cm-1 ).

A review of photochemical approaches for the treatment of a wide range of pesticides.

PubMed

Reddy, P Venkata Laxma; Kim, Ki-Hyun

2015-03-21

Pesticides are renowned as some of the most pernicious chemicals known to humankind. Nine out of twelve most hazardous and persistent organic chemicals on planet have been identified as pesticides and their derivatives. Because of their strong recalcitrant nature, it often becomes a difficult task to treat them by conventional approaches. It is well perceived that many factors can interfere with the degradation of pesticides under ambient conditions, e.g., media, light intensity, humic content, and other biological components. However, for the effective treatment of pesticides, photochemical methods are viewed as having clear and perceivable advantages. In this article, we provide a review of the fundamental characteristics of photochemical approaches for pesticide treatment and the factors governing their capacity and potential in such a process. Copyright © 2014 Elsevier B.V. All rights reserved.

Determination of stress intensity factors for interface cracks under mixed-mode loading

NASA Technical Reports Server (NTRS)

Naik, Rajiv A.; Crews, John H., Jr.

1992-01-01

A simple technique was developed using conventional finite element analysis to determine stress intensity factors, K1 and K2, for interface cracks under mixed-mode loading. This technique involves the calculation of crack tip stresses using non-singular finite elements. These stresses are then combined and used in a linear regression procedure to calculate K1 and K2. The technique was demonstrated by calculating three different bimaterial combinations. For the normal loading case, the K's were within 2.6 percent of an exact solution. The normalized K's under shear loading were shown to be related to the normalized K's under normal loading. Based on these relations, a simple equation was derived for calculating K1 and K2 for mixed-mode loading from knowledge of the K's under normal loading. The equation was verified by computing the K's for a mixed-mode case with equal and normal shear loading. The correlation between exact and finite element solutions is within 3.7 percent. This study provides a simple procedure to compute K2/K1 ratio which has been used to characterize the stress state at the crack tip for various combinations of materials and loadings. Tests conducted over a range of K2/K1 ratios could be used to fully characterize interface fracture toughness.

Combined Henyey-Greenstein and Rayleigh phase function.

PubMed

Liu, Quanhua; Weng, Fuzhong

2006-10-01

The phase function is an important parameter that affects the distribution of scattered radiation. In Rayleigh scattering, a scatterer is approximated by a dipole, and its phase function is analytically related to the scattering angle. For the Henyey-Greenstein (HG) approximation, the phase function preserves only the correct asymmetry factor (i.e., the first moment), which is essentially important for anisotropic scattering. When the HG function is applied to small particles, it produces a significant error in radiance. In addition, the HG function is applied only for an intensity radiative transfer. We develop a combined HG and Rayleigh (HG-Rayleigh) phase function. The HG phase function plays the role of modulator extending the application of the Rayleigh phase function for small asymmetry scattering. The HG-Rayleigh phase function guarantees the correct asymmetry factor and is valid for a polarization radiative transfer. It approaches the Rayleigh phase function for small particles. Thus the HG-Rayleigh phase function has wider applications for both intensity and polarimetric radiative transfers. For microwave radiative transfer modeling in this study, the largest errors in the brightness temperature calculations for weak asymmetry scattering are generally below 0.02 K by using the HG-Rayleigh phase function. The errors can be much larger, in the 1-3 K range, if the Rayleigh and HG functions are applied separately.

Dynamic Fracture Properties of Rocks Subjected to Static Pre-load Using Notched Semi-circular Bend Method

NASA Astrophysics Data System (ADS)

Chen, Rong; Li, Kang; Xia, Kaiwen; Lin, Yuliang; Yao, Wei; Lu, Fangyun

2016-10-01

A dynamic load superposed on a static pre-load is a key problem in deep underground rock engineering projects. Based on a modified split Hopkinson pressure bar test system, the notched semi-circular bend (NSCB) method is selected to investigate the fracture initiation toughness of rocks subjected to pre-load. In this study, a two-dimensional ANSYS finite element simulation model is developed to calculate the dimensionless stress intensity factor. Three groups of NSCB specimen are tested under a pre-load of 0, 37 and 74 % of the maximum static load and with the loading rate ranging from 0 to 60 GPa m1/2 s-1. The results show that under a given pre-load, the fracture initiation toughness of rock increases with the loading rate, resembling the typical rate dependence of materials. Furthermore, the dynamic rock fracture toughness decreases with the static pre-load at a given loading rate. The total fracture toughness, defined as the sum of the dynamic fracture toughness and initial stress intensity factor calculated from the pre-load, increases with the pre-load at a given loading rate. An empirical equation is used to represent the effect of loading rate and pre-load force, and the results show that this equation can depict the trend of the experimental data.

Analysis of crack propagation in human long bone by using finite element modeling

NASA Astrophysics Data System (ADS)

Salim, Mohammad Shahril; Salleh, Ahmad Faizal; Daud, Ruslizam

2017-12-01

The aim of this research is to present a numerical modeling of crack for human long bone specifically on femur shaft bone under mode I loading condition. Two - dimensional model (2D) of long bone was developed based on past research study. The finite element analysis and construction of the model are done using Mechanical APDL (ANSYS) v14.0 software. The research was conducted mainly based on two conditions that were at different crack lengths and different loading forces for male and female. In order to evaluate the stress intensity factor (KI) of the femur shaft of long bone, this research employed finite element method to predict the brittle fracture loading by using three-point bending test. The result of numerical test found that the crack was formed when the crack length reached 0.0022 m where KI values are proportional with the crack's length. Also, various loading forces in range of 400 N to 1000 N were applied in an attempt to study their effect on stress intensity factor and it was found that the female dimension has higher KI values compared to male. It was also observed that K values found by this method have good agreement with theoretical results based on previous research.

Physical and occupational therapy utilization in a pediatric intensive care unit.

PubMed

Cui, Liang R; LaPorte, Megan; Civitello, Matthew; Stanger, Meg; Orringer, Maxine; Casey, Frank; Kuch, Bradley A; Beers, Sue R; Valenta, Cynthia A; Kochanek, Patrick M; Houtrow, Amy J; Fink, Ericka L

2017-08-01

To characterize the use of physical therapy (PT) and occupational therapy (OT) consultation in our pediatric intensive care unit (PICU). We studied children aged 1week-18years admitted to a tertiary care PICU for ≥3days. Patient characteristics, details of PT and OT sessions and adverse events were collected. A multivariable logistic regression was performed to determine factors associated with receipt of PT and OT consultation with propensity analysis followed by a regression for factors associated with outcome. Of 138 children studied, 40 (29%) received PT and OT consultation. Services were initiated 6.9±10.0 (mean±standard deviation) days after PICU admission. Range of motion (83%) was the most common therapy provided and 28% of patients were ambulated. Sixty-four of 297 (21.5%) sessions were deferred and 7 (2.4%) sessions were terminated early due to physiologic instability with no serious adverse events. Children who received PT and OT were older, more likely to require neuromuscular blocking agents, and had lower pre-PICU POPC scores (all p<0.05). Data are needed to inform on the efficacy of rehabilitative therapies initiated in the ICU to improve outcome for critically ill children. Copyright © 2017 Elsevier Inc. All rights reserved.

Administration of recombinant activated factor VII in the intensive care unit after complex cardiovascular surgery: clinical and economic outcomes.

PubMed

Uber, Walter E; Toole, John M; Stroud, Martha R; Haney, Jason S; Lazarchick, John; Crawford, Fred A; Ikonomidis, John S

2011-06-01

Refractory bleeding after complex cardiovascular surgery often leads to increased length of stay, cost, morbidity, and mortality. Recombinant activated factor VII administered in the intensive care unit can reduce bleeding, transfusion, and surgical re-exploration. We retrospectively compared factor VII administration in the intensive care unit with reoperation for refractory bleeding after complex cardiovascular surgery. From 1501 patients who underwent cardiovascular procedures between December 2003 and September 2007, 415 high-risk patients were identified. From this cohort, 24 patients were divided into 2 groups based on whether they either received factor VII in the intensive care unit (n = 12) or underwent reoperation (n = 12) for refractory bleeding. Preoperative and postoperative data were collected to compare efficacy, safety, and economic outcomes. In-hospital survival for both groups was 100%. Factor VII was comparable with reoperation in achieving hemostasis, with both groups demonstrating decreases in chest tube output and need for blood products. Freedom from reoperation was achieved in 75% of patients receiving factor VII, whereas reoperation was effective in achieving hemostasis alone in 83.3% of patients. Prothrombin time, international normalized ratio, and median operating room time were significantly less (P < .05) in patients who received factor VII. Both groups had no statistically significant differences in other efficacy, safety, or economic outcomes. Factor VII administration in the intensive care unit appears comparable with reoperation for refractory bleeding after complex cardiovascular surgical procedures and might represent an alternative to reoperation in selected patients. Future prospective, randomized controlled trials might further define its role. Copyright © 2011 The American Association for Thoracic Surgery. Published by Mosby, Inc. All rights reserved.

Stress-intensity factors for a thick-walled cylinder containing an annular imbedded or external or internal surface crack

NASA Technical Reports Server (NTRS)

Erdol, R.; Erdogan, F.

1976-01-01

The elastostatic axisymmetric problem for a long thick-walled cylinder containing a ring-shaped internal or edge crack is considered. Using the standard transform technique the problem is formulated in terms of an integral equation which has a simple Cauchy kernel for the internal crack and a generalized Cauchy kernel for the edge crack as the dominant part. As examples the uniform axial load and the steady-state thermal stress problems have been solved and the related stress intensity factors have been calculated. Among other findings the results show that in the cylinder under uniform axial stress containing an internal crack the stress intensity factor at the inner tip is always greater than that at the outer tip for equal net ligament thicknesses and in the cylinder with an edge crack which is under a state of thermal stress the stress intensity factor is a decreasing function of the crack depth, tending to zero as the crack depth approaches the wall thickness.

Some remarks on elastic crack-tip stress fields.

NASA Technical Reports Server (NTRS)

Rice, J. R.

1972-01-01

It is shown that if the displacement field and stress intensity factor are known as functions of crack length for any symmetrical load system acting on a linear elastic body in plane strain, then the stress intensity factor for any other symmetrical load system whatsoever on the same body may be directly determined. The result is closely related to Bueckner's (1970) weight function, through which the stress intensity factor is expressed as a sum of work-like products between applied forces and values of the weight function at their points of application. An example of the method is given wherein the solution for a crack in a remotely uniform stress field is used to generate the expression for the stress intensity factor due to an arbitrary traction distribution on the faces of a crack. A corresponding theory is developed in an appendix for three-dimensional crack problems, although this appears to be directly useful chiefly for problems in which there is axial symmetry.

Evaluation of finite-element models and stress-intensity factors for surface cracks emanating from stress concentrations

NASA Technical Reports Server (NTRS)

Tan, P. W.; Raju, I. S.; Shivakumar, K. N.; Newman, J. C., Jr.

1990-01-01

A re-evaluation of the 3-D finite-element models and methods used to analyze surface crack at stress concentrations is presented. Previous finite-element models used by Raju and Newman for surface and corner cracks at holes were shown to have ill-shaped elements at the intersection of the hole and crack boundaries. Improved models, without these ill-shaped elements, were developed for a surface crack at a circular hole and at a semi-circular edge notch. Stress-intensity factors were calculated by both the nodal-force and virtual-crack-closure methods. Comparisons made between the previously developed stress-intensity factor equations and the results from the improved models agreed well except for configurations with large notch-radii-to-plate-thickness ratios. Stress-intensity factors for a semi-elliptical surface crack located at the center of a semi-circular edge notch in a plate subjected to remote tensile loadings were calculated using the improved models.

Fatigue Crack Growth Rate and Stress-Intensity Factor Corrections for Out-of-Plane Crack Growth

NASA Technical Reports Server (NTRS)

Forth, Scott C.; Herman, Dave J.; James, Mark A.

2003-01-01

Fatigue crack growth rate testing is performed by automated data collection systems that assume straight crack growth in the plane of symmetry and use standard polynomial solutions to compute crack length and stress-intensity factors from compliance or potential drop measurements. Visual measurements used to correct the collected data typically include only the horizontal crack length, which for cracks that propagate out-of-plane, under-estimates the crack growth rates and over-estimates the stress-intensity factors. The authors have devised an approach for correcting both the crack growth rates and stress-intensity factors based on two-dimensional mixed mode-I/II finite element analysis (FEA). The approach is used to correct out-of-plane data for 7050-T7451 and 2025-T6 aluminum alloys. Results indicate the correction process works well for high DeltaK levels but fails to capture the mixed-mode effects at DeltaK levels approaching threshold (da/dN approximately 10(exp -10) meter/cycle).

Light intensity affects RNA silencing of a transgene in Nicotiana benthamiana plants.

PubMed

Kotakis, Christos; Vrettos, Nicholas; Kotsis, Dimitrios; Tsagris, Mina; Kotzabasis, Kiriakos; Kalantidis, Kriton

2010-10-12

Expression of exogenous sequences in plants is often suppressed through one of the earliest described RNA silencing pathways, sense post-transcriptional gene silencing (S-PTGS). This type of suppression has made significant contributions to our knowledge of the biology of RNA silencing pathways and has important consequences in plant transgenesis applications. Although significant progress has been made in recent years, factors affecting the stability of transgene expression are still not well understood. It has been shown before that the efficiency of RNA silencing in plants is influenced by various environmental factors. Here we report that a major environmental factor, light intensity, significantly affects the induction and systemic spread of S-PTGS. Moreover, we show that photoadaptation to high or low light intensity conditions differentially affects mRNA levels of major components of the RNA silencing machinery. Light intensity is one of the previously unknown factors that affect transgene stability at the post-transcriptional level. Our findings demonstrate an example of how environmental conditions could affect RNA silencing.

Strain intensity factor approach for predicting the strength of continuously reinforced metal matrix composites

NASA Technical Reports Server (NTRS)

Poe, C. C., Jr.

1988-01-01

A method was previously developed to predict the fracture toughness (stress intensity factor at failure) of composites in terms of the elastic constants and the tensile failing strain of the fibers. The method was applied to boron/aluminum composites made with various proportions of 0 to + or - 45 deg plies. Predicted values of fracture toughness were in gross error because widespread yielding of the aluminum matrix made the compliance very nonlinear. An alternate method was developed to predict the strain intensity factor at failure rather than the stress intensity factor because the singular strain field was not affected by yielding as much as the stress field. Strengths of specimens containing crack-like slits were calculated from predicted failing strains using uniaxial stress-strain curves. Predicted strengths were in good agreement with experimental values, even for the very nonlinear laminates that contained only + or - 45 deg plies. This approach should be valid for other metal matrix composites that have continuous fibers.

Normal compression wave scattering by a permeable crack in a fluid-saturated poroelastic solid

NASA Astrophysics Data System (ADS)

Song, Yongjia; Hu, Hengshan; Rudnicki, John W.

2017-04-01

A mathematical formulation is presented for the dynamic stress intensity factor (mode I) of a finite permeable crack subjected to a time-harmonic propagating longitudinal wave in an infinite poroelastic solid. In particular, the effect of the wave-induced fluid flow due to the presence of a liquid-saturated crack on the dynamic stress intensity factor is analyzed. Fourier sine and cosine integral transforms in conjunction with Helmholtz potential theory are used to formulate the mixed boundary-value problem as dual integral equations in the frequency domain. The dual integral equations are reduced to a Fredholm integral equation of the second kind. It is found that the stress intensity factor monotonically decreases with increasing frequency, decreasing the fastest when the crack width and the slow wave wavelength are of the same order. The characteristic frequency at which the stress intensity factor decays the fastest shifts to higher frequency values when the crack width decreases.

Origin and variability in volatile organic compounds observed at an Eastern Mediterranean background site (Cyprus)

NASA Astrophysics Data System (ADS)

Debevec, Cécile; Sauvage, Stéphane; Gros, Valérie; Sciare, Jean; Pikridas, Michael; Stavroulas, Iasonas; Salameh, Thérèse; Leonardis, Thierry; Gaudion, Vincent; Depelchin, Laurence; Fronval, Isabelle; Sarda-Esteve, Roland; Baisnée, Dominique; Bonsang, Bernard; Savvides, Chrysanthos; Vrekoussis, Mihalis; Locoge, Nadine

2017-09-01

More than 7000 atmospheric measurements of over 60 C2 - C16 volatile organic compounds (VOCs) were conducted at a background site in Cyprus during a 1-month intensive field campaign held in March 2015. This exhaustive dataset consisted of primary anthropogenic and biogenic VOCs, including a wide range of source-specific tracers, and oxygenated VOCs (with various origins) that were measured online by flame ionization detection-gas chromatography and proton transfer mass spectrometry. Online submicron aerosol chemical composition was performed in parallel using an aerosol mass spectrometer. This study presents the high temporal variability in VOCs and their associated sources. A preliminary analysis of their time series was performed on the basis of independent tracers (NO, CO, black carbon), meteorological data and the clustering of air mass trajectories. Biogenic compounds were mainly attributed to a local origin and showed compound-specific diurnal cycles such as a daily maximum for isoprene and a nighttime maximum for monoterpenes. Anthropogenic VOCs as well as oxygenated VOCs displayed higher mixing ratios under the influence of continental air masses (i.e., western Asia), indicating that long-range transport significantly contributed to the VOC levels in the area. Source apportionment was then conducted on a database of 20 VOCs (or grouped VOCs) using a source receptor model. The positive matrix factorization and concentration field analyses were hence conducted to identify and characterize covariation factors of VOCs that were representative of primary emissions as well as chemical transformation processes. A six-factor PMF solution was selected, namely two primary biogenic factors (relative contribution of 43 % to the total mass of VOCs) for different types of emitting vegetation; three anthropogenic factors (short-lived combustion source, evaporative sources, industrial and evaporative sources; 21 % all together), identified as being either of local origin or from more distant emission zones (i.e., the south coast of Turkey); and a last factor (36 %) associated with regional background pollution (air masses transported both from the Western and Eastern Mediterranean regions). One of the two biogenic and the regional background factors were found to be the largest contributors to the VOC concentrations observed at our sampling site. Finally, a combined analysis of VOC PMF factors with source-apportioned organic aerosols (OAs) helped to better distinguish between anthropogenic and biogenic influences on the aerosol and gas phase compositions. The highest OA concentrations were observed when the site was influenced by air masses rich in semi-volatile OA (less oxidized aerosols) originating from the southwest of Asia, in contrast with OA factor contributions associated with the remaining source regions. A reinforcement of secondary OA formation also occurred due to the intense oxidation of biogenic precursors.

The effects of environmental and visitor variables on the behavior of free-ranging ring-tailed lemurs (Lemur catta) in captivity.

PubMed

Collins, Courtney; Corkery, Ilse; Haigh, Amy; McKeown, Sean; Quirke, Thomas; O'Riordan, Ruth

2017-07-01

The effect of the zoo environment on captive animals is an increasingly studied area of zoo research, with visitor effects and exhibit design recognized as two of the factors that can contribute to animal welfare in captivity. It is known that in some situations, visitors may be stressful to zoo-housed primates, and this may be compounded by environmental factors such as the weather, the time of day, and zoo husbandry routines. Exhibit design and proximity of the public are also known to influence behavioral response of primates to visitors; however, there is minimal research on free-ranging zoo animals, even though they are potentially subjected to intense interactions with visitors. The current study explores the effect of the zoo environment, several visitor variables and specific animal-visitor interactions on the behavior of free-ranging ring-tailed lemurs (Lemur catta) at Fota Wildlife Park, Ireland. Data were obtained through scan samples collected over 18 months (n = 12,263) and analyzed using a range of statistical tests, including general estimating equations (GEE). Results demonstrate that the free-ranging lemurs' behavior at Fota Wildlife Park is affected by season, weather and time of day. Similarities in feeding behavior exist between the free-ranging group and lemurs in the wild when resources are plentiful. Visitor variables had a limited effect on lemur behavior and behavioral diversity level. Lemurs rarely reacted to visitors when specific interactions were considered. Generally, the results indicate that the ring-tailed lemurs in this study have adapted well to the zoo environment and habituated to visitors. © 2017 Wiley Periodicals, Inc.

Development of a risk-screening tool for cancer survivors to participate in unsupervised moderate- to vigorous-intensity exercise: results from a survey study.

PubMed

Brown, Justin C; Ko, Emily M; Schmitz, Kathryn H

2015-02-01

The health benefits of exercise increase in dose-response fashion among cancer survivors. However, it is unclear how to identify cancer survivors who may require a pre-exercise evaluation before they progress from the common recommendation of walking to unsupervised moderate- to vigorous-intensity exercise. To clarify how to identify cancer survivors who should undergo a pre-exercise evaluation before they progress from the common recommendation of walking to unsupervised moderate- to vigorous-intensity exercise. Electronic survey. Forty-seven (n = 47) experts in the field of exercise physiology, rehabilitation medicine, and cancer survivorship. Not applicable. We synthesized peer-reviewed guidelines for exercise and cancer survivorship and identified 82 health factors that may warrant a pre-exercise evaluation before a survivor engages in unsupervised moderate- to vigorous-intensity exercise. The 82 health factors were classified into 3 domains: (1) clinical health factors; (2) comorbidity and device health factors; and (3) medications. We surveyed a sample of experts asking them to identify which of the 82 health factors among cancer survivors would indicate the need for a pre-exercise evaluation before they engaged in moderate- to vigorous-intensity exercise. The response rate to our survey was 75% (n = 47). Across the 3 domains of health factors, acute symptoms, comorbidities, and medications related to cardiovascular disease were agreed on to indicate a pre-exercise evaluation for survivors before they engaged in unsupervised moderate- to vigorous-intensity exercise. Other health factors in the survey included hematologic, musculoskeletal, systemic, gastrointestinal, pulmonary, and neurological symptoms and comorbidities. Eighteen experts (38%) said it was difficult to provide absolute answers because no 2 patients are alike, and their decisions are made on a case-by-case basis. The results from this expert survey will help to identify which cancer survivors should undergo a pre-exercise evaluation before they engage in unsupervised moderate- to vigorous-intensity exercise. Copyright © 2015 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.

James Clerk Maxwell Prize Address: High Intensity Laser Propagation and Interactions

NASA Astrophysics Data System (ADS)

Sprangle, Phillip

2013-10-01

High intensity laser radiation sources cover a wide range of parameters, e.g., peak powers from tera to peta watts, pulse lengths from pico to femto seconds, repetition rates ranging from kilo to mega hertz and average powers of many tens of watts. This talk will cover, among other things, some of the unique physical processes which result when high intensity laser radiation interacts with gases and plasmas. One of the interesting topics to be discussed is the propagation of these laser pulses in a turbulent atmosphere which results in a multitude of coupled linear and nonlinear processes including filamentation and scintillation. Phase conjugation techniques to reduce the effects of atmospheric turbulence (scintillation) will be described. This talk will also discuss a range of potential applications of these high intensity lasers, including: electron acceleration in spatially periodic and tapered plasma channels, detection of radioactive material using electromagnetic signatures, atmospheric lasing of N2 molecules, as well as incoherent and coherent x-ray generation mechanisms. Research supported by NRL, ONR and UMD.

Odor intensity and characterization of jet exhaust and chemical analytical measurements

NASA Technical Reports Server (NTRS)

Kendall, D. A.; Levins, P. L.

1973-01-01

Odor and chemical analyses were carried out on the exhaust samples from a J-57 combustor can operated over a range of inlet conditions, and with several fuel types and nozzle modifications. The odor characteristics and total intensity of odor for each exhaust were determined over a range of dilutions to allow for a least squares determination of the intensity at 1,000 to 1 dilutions. Analytical measures included the concentration of total hydrocarbons and the concentrations of aromatic organic species and oxygenated organic species from collected samples which were taken concurrently. A correlation was found between the concentration of the odorous oxygenated fraction and the total intensity of aroma. Inlet operating conditions and nozzle modifications which increase the efficiency of combustion as measured by exhaust gas analyses reduce the odor intensity and the quantity of oxygenates in the exhaust. The type of fuel burned altered the intensity of odor in relation to the quantity of oxygenates produced and, in some instances, changed the odor character.

Organizational and Teamwork Factors of Tele-Intensive Care Units.

PubMed

Wilkes, Michael S; Marcin, James P; Ritter, Lois A; Pruitt, Sherilyn

2016-09-01

Use of tele-intensive care involves organizational and teamwork factors across geographic locations. This situation adds to the complexity of collaboration in providing quality patient-centered care. To evaluate cross-agency teamwork of health care professionals caring for patients in tele-intensive care units in rural and urban regions. A national qualitative study was conducted in 3 US geographic regions with tele-intensive care programs. Discussions and interviews were held with key participants during site visits at 3 hub sites (specialist services location) and 8 rural spoke sites (patient location). The effects of communication and culture between the hub team and the spoke team on use of the services and effectiveness of care were evaluated. A total of 34 participants were interviewed. Specific organizational and teamwork factors significantly affect the functionality of a tele-intensive care unit. Key operational and cultural barriers that limit the benefits of the units include unrealistic expectations about operational capabilities, lack of trust, poorly defined leadership, and a lack of communication policies. Potential solutions include education on spoke facility resources, clearly defined expectations and role reversal education, team-building activities, and feedback mechanisms to share concerns, successes, and suggestions. Proper administration and attention to important cultural and teamwork factors are essential to making tele-intensive care units effective, practical, and sustainable. ©2016 American Association of Critical-Care Nurses.

The role of burnout syndrome as a mediator for the effect of psychosocial risk factors on the intensity of musculoskeletal disorders: a structural equation modeling approach.

PubMed

Gholami, Tahereh; Pahlavian, Ahmad Heidari; Akbarzadeh, Mahdi; Motamedzade, Majid; Moghaddam, Rashid Heidari

2016-01-01

This study examined the hypothesis that burnout syndrome mediates effects of psychosocial risk factors and intensity of musculoskeletal disorders (MSDs) among hospital nurses. The sample was composed of 415 nurses from various wards across five hospitals of Iran's Hamedan University of Medical Sciences. Data were collected through three questionnaires: job content questionnaire, Maslach burnout inventory and visual analogue scale. Results of structural equation modeling with a mediating effect showed that psychosocial risk factors were significantly related to changes in burnout, which in turn affects intensity of MSDs.

The Fundamental Solutions for the Stress Intensity Factors of Modes I, II And III. The Axially Symmetric Problem

NASA Astrophysics Data System (ADS)

Rogowski, B.

2015-05-01

The subject of the paper are Green's functions for the stress intensity factors of modes I, II and III. Green's functions are defined as a solution to the problem of an elastic, transversely isotropic solid with a penny-shaped or an external crack under general axisymmetric loadings acting along a circumference on the plane parallel to the crack plane. Exact solutions are presented in a closed form for the stress intensity factors under each type of axisymmetric ring forces as fundamental solutions. Numerical examples are employed and conclusions which can be utilized in engineering practice are formulated.

Thermally stimulated luminescence studies of undoped, Cu- and Mn-doped CaSO4 compounds

NASA Astrophysics Data System (ADS)

Manam, J.; Das, S.

Thermally stimulated luminescence (TSL) of undoped and doped CaSO4 with activators such as Cu and Mn has been investigated. The polycrystalline samples of undoped and doped CaSO4 are prepared by the melting method. The formation of CaSO4 compound is confirmed by X-ray diffraction and Fourier transform infrared studies. Scanning electron microscopic studies of CaSO4 are also carried out. The TSL glow curves of undoped CaSO4, Cu- and Mn-doped CaSO4 are studied. Comparison of the thermoluminescence (TL) intensity of the most intensive glow peak of Cu-doped CaSO4 compound with that of undoped CaSO4 shows that addition of Cu impurity in CaSO4 compound enhances the TL intensity by about four times. However, the addition of Mn impurity to undoped CaSO4 increases the TL intensity by about three times when compared with that of undoped CaSO4. The TL-dose dependence of all three samples was studied and was observed to be almost linear in the studied range of irradiation time. Among the samples studied, namely undoped CaSO4 and Cu- and Mn-doped CaSO4, Cu-doped CaSO4 is found to be the most sensitive. The trap parameters, namely order of kinetics (b), activation energy (E) and frequency factor (s) associated with the most intensive glow peaks of CaSO4:Mn, CaSO4:Cu and CaSO4 phosphors were determined using the glow curve shape (Chen's) method.

Climate, water use, and land surface transformation in an irrigation intensive watershed - streamflow responses from 1950 through 2010

USGS Publications Warehouse

Dale, Joseph; Zou, Chris B.; Andrews, William J.; Long, James M.; Liang, Ye; Qiao, Lei

2015-01-01

Climatic variability and land surface change have a wide range of effects on streamflow and are often difficult to separate. We analyzed long-term records of climate, land use and land cover, and re-constructed the water budget based on precipitation, groundwater levels, and water use from 1950 through 2010 in the Cimarron–Skeleton watershed and a portion of the Cimarron–Eagle Chief watershed in Oklahoma, an irrigation-intensive agricultural watershed in the Southern Great Plains, USA. Our results show that intensive irrigation through alluvial aquifer withdrawal modifies climatic feedback and alters streamflow response to precipitation. Increase in consumptive water use was associated with decreases in annual streamflow, while returning croplands to non-irrigated grasslands was associated with increases in streamflow. Along with groundwater withdrawal, anthropogenic-induced factors and activities contributed nearly half to the observed variability of annual streamflow. Streamflow was more responsive to precipitation during the period of intensive irrigation between 1965 and 1984 than the period of relatively lower water use between 1985 and 2010. The Cimarron River is transitioning from a historically flashy river to one that is more stable with a lower frequency of both high and low flow pulses, a higher baseflow, and an increased median flow due in part to the return of cropland to grassland. These results demonstrated the interrelationship among climate, land use, groundwater withdrawal and streamflow regime and the potential to design agricultural production systems and adjust irrigation to mitigate impact of increasing climate variability on streamflow in irrigation intensive agricultural watershed.

Influence of stream characteristics and grazing intensity on stream temperatures in eastern Oregon.

Treesearch

S.B. Maloney; A.R. Tiedemann; D.A. Higgins; T.M. Quigley; D.B. Marx

1999-01-01

Stream temperatures were measured during summer months, 1978 to 1984, at 12 forested watersheds near John Day, Oregon, to determine temperature characteristics and assess effects of three range management strategies of increasing intensity. Maximum temperatures in streams of the 12 watersheds ranged from 12.5 to 27.8 oC. Maximum stream temperatures on four watersheds...

[Identification of irradiated abalone by ESR spectroscopy].

PubMed

Song, Yeping; Wang, Chuanxian; Yang, Zhenyu; Zhong, Weike; Geng, Jinpei; Lu, Di; Ding, Zhuoping

2012-05-01

To establish an analytical method for the detection and identification of irradiated abalone by electron spin resonance spectroscopy. Electron spin resonance (ESR) was used to study the spectral characteristics of abalone and the characteristic peak for quantitation. There were obvious different ESR spectra between unirradiated and irradiated abalone. The g factor for unirradiated abalone was 2.0055-2.0060, the g1 and g2 factor for irradiated abalone were (2.0027 +/- 0.0001) and (1.9994 +/- 0.0001), respectively. The ESR signal intensity of characteristic peak was positively correlated with absorbed dose in the range of 0.5 - 10 kGy, left peak was the characteristic peak for quantitation and the detection limit was < or = 0.5 kGy. It was difficult to quantitate when the absorbed dose was over 10 kGy. ESR characteristic peak and g factor were able to qualitatively determine the irradiation of abalone. ESR spectroscopy is an effective method to determine whether the abalone being irradiated or not.