An exploration of alternative visualisations of the basic helix-loop-helix protein interaction network

PubMed Central

Holden, Brian J; Pinney, John W; Lovell, Simon C; Amoutzias, Grigoris D; Robertson, David L

2007-01-01

Background Alternative representations of biochemical networks emphasise different aspects of the data and contribute to the understanding of complex biological systems. In this study we present a variety of automated methods for visualisation of a protein-protein interaction network, using the basic helix-loop-helix (bHLH) family of transcription factors as an example. Results Network representations that arrange nodes (proteins) according to either continuous or discrete information are investigated, revealing the existence of protein sub-families and the retention of interactions following gene duplication events. Methods of network visualisation in conjunction with a phylogenetic tree are presented, highlighting the evolutionary relationships between proteins, and clarifying the context of network hubs and interaction clusters. Finally, an optimisation technique is used to create a three-dimensional layout of the phylogenetic tree upon which the protein-protein interactions may be projected. Conclusion We show that by incorporating secondary genomic, functional or phylogenetic information into network visualisation, it is possible to move beyond simple layout algorithms based on network topology towards more biologically meaningful representations. These new visualisations can give structure to complex networks and will greatly help in interpreting their evolutionary origins and functional implications. Three open source software packages (InterView, TVi and OptiMage) implementing our methods are available. PMID:17683601

Multidimensional joint coupling: a case study visualisation approach to movement coordination and variability.

PubMed

Irwin, Gareth; Kerwin, David G; Williams, Genevieve; Van Emmerik, Richard E A; Newell, Karl M; Hamill, Joseph

2018-06-18

A case study visualisation approach to examining the coordination and variability of multiple interacting segments is presented using a whole-body gymnastic skill as the task example. One elite male gymnast performed 10 trials of 10 longswings whilst three-dimensional locations of joint centres were tracked using a motion analysis system. Segment angles were used to define coupling between the arms and trunk, trunk and thighs and thighs and shanks. Rectified continuous relative phase profiles for each interacting couple for 80 longswings were produced. Graphical representations of coordination couplings are presented that include the traditional single coupling, followed by the relational dynamics of two couplings and finally three couplings simultaneously plotted. This method highlights the power of visualisation of movement dynamics and identifies properties of the global interacting segmental couplings that a more formal analysis may not reveal. Visualisation precedes and informs the appropriate qualitative and quantitative analysis of the dynamics.

Use of Data Visualisation in the Teaching of Statistics: A New Zealand Perspective

ERIC Educational Resources Information Center

Forbes, Sharleen; Chapman, Jeanette; Harraway, John; Stirling, Doug; Wild, Chris

2014-01-01

For many years, students have been taught to visualise data by drawing graphs. Recently, there has been a growing trend to teach statistics, particularly statistical concepts, using interactive and dynamic visualisation tools. Free down-loadable teaching and simulation software designed specifically for schools, and more general data visualisation…

Communicating spatial uncertainty to non-experts using R

NASA Astrophysics Data System (ADS)

Luzzi, Damiano; Sawicka, Kasia; Heuvelink, Gerard; de Bruin, Sytze

2016-04-01

Effective visualisation methods are important for the efficient use of uncertainty information for various groups of users. Uncertainty propagation analysis is often used with spatial environmental models to quantify the uncertainty within the information. A challenge arises when trying to effectively communicate the uncertainty information to non-experts (not statisticians) in a wide range of cases. Due to the growing popularity and applicability of the open source programming language R, we undertook a project to develop an R package that facilitates uncertainty propagation analysis in spatial environmental modelling. The package has implemented Monte Carlo algorithms for uncertainty propagation, the output of which is represented by an ensemble of model outputs (i.e. a sample from a probability distribution). Numerous visualisation methods exist that aim to present such spatial uncertainty information both statically, dynamically and interactively. To provide the most universal visualisation tools for non-experts, we conducted a survey on a group of 20 university students and assessed the effectiveness of selected static and interactive methods for visualising uncertainty in spatial variables such as DEM and land cover. The static methods included adjacent maps and glyphs for continuous variables. Both allow for displaying maps with information about the ensemble mean, variance/standard deviation and prediction intervals. Adjacent maps were also used for categorical data, displaying maps of the most probable class, as well as its associated probability. The interactive methods included a graphical user interface, which in addition to displaying the previously mentioned variables also allowed for comparison of joint uncertainties at multiple locations. The survey indicated that users could understand the basics of the uncertainty information displayed in the static maps, with the interactive interface allowing for more in-depth information. Subsequently, the R package included a collation of the plotting functions that were evaluated in the survey. The implementation of static visualisations was done via calls to the 'ggplot2' package. This allowed the user to provide control over the content, legend, colours, axes and titles. The interactive methods were implemented using the 'shiny' package allowing users to activate the visualisation of statistical descriptions of uncertainty through interaction with a plotted map of means. This research brings uncertainty visualisation to a broader audience through the development of tools for visualising uncertainty using open source software.

D Recording, Modelling and Visualisation of the Fortification Kristiansten in Trondheim (norway) by Photogrammetric Methods and Terrestrial Laser Scanning in the Framework of Erasmus Programmes

NASA Astrophysics Data System (ADS)

Kersten, T.; Lindstaedt, M.; Maziull, L.; Schreyer, K.; Tschirschwitz, F.; Holm, K.

2015-02-01

In this contribution the 3D recording, 3D modelling and 3D visualisation of the fortification Kristiansten in Trondheim (Norway) by digital photogrammetry and terrestrial laser scanning are presented. The fortification Kristiansten was built after the large city fire in the year 1681 above the city and has been a museum since 1997. The recording of the fortress took place in each case at the end of August/at the beginning of September 2010 and 2011 during two two-week summer schools with the topic "Digital Photogrammetry & Terrestrial Laser Scanning for Cultural Heritage Documentation" at NTNU Trondheim with international students in the context of ERASMUS teaching programs. For data acquisition, a terrestrial laser scanner and digital SLR cameras were used. The establishment of a geodetic 3D network, which was later transformed into the Norwegian UTM coordinate system using control points, ensured a consistent registration of the scans and an orientation of the photogrammetric images. The fortress buildings were constructed in detail from photogrammetric photographs and point clouds using AutoCAD, while the fortress area and walls were modelled by triangle meshing in Geomagic. The visualisation of the fortress was carried out 2013 with the software Cinema 4D in the context of a lecture in the Master study programme Geomatics. The 3D model was textured and afterwards presented in a video. This 3D model was finally transferred into the game engine Unity for an interactive 3D visualisation on 3D monitors.

Map as a Service: A Framework for Visualising and Maximising Information Return from Multi-Modal Wireless Sensor Networks

PubMed Central

Hammoudeh, Mohammad; Newman, Robert; Dennett, Christopher; Mount, Sarah; Aldabbas, Omar

2015-01-01

This paper presents a distributed information extraction and visualisation service, called the mapping service, for maximising information return from large-scale wireless sensor networks. Such a service would greatly simplify the production of higher-level, information-rich, representations suitable for informing other network services and the delivery of field information visualisations. The mapping service utilises a blend of inductive and deductive models to map sense data accurately using externally available knowledge. It utilises the special characteristics of the application domain to render visualisations in a map format that are a precise reflection of the concrete reality. This service is suitable for visualising an arbitrary number of sense modalities. It is capable of visualising from multiple independent types of the sense data to overcome the limitations of generating visualisations from a single type of sense modality. Furthermore, the mapping service responds dynamically to changes in the environmental conditions, which may affect the visualisation performance by continuously updating the application domain model in a distributed manner. Finally, a distributed self-adaptation function is proposed with the goal of saving more power and generating more accurate data visualisation. We conduct comprehensive experimentation to evaluate the performance of our mapping service and show that it achieves low communication overhead, produces maps of high fidelity, and further minimises the mapping predictive error dynamically through integrating the application domain model in the mapping service. PMID:26378539

Towards the Development of a Taxonomy for Visualisation of Streamed Geospatial Data

NASA Astrophysics Data System (ADS)

Sibolla, B. H.; Van Zyl, T.; Coetzee, S.

2016-06-01

Geospatial data has very specific characteristics that need to be carefully captured in its visualisation, in order for the user and the viewer to gain knowledge from it. The science of visualisation has gained much traction over the last decade as a response to various visualisation challenges. During the development of an open source based, dynamic two-dimensional visualisation library, that caters for geospatial streaming data, it was found necessary to conduct a review of existing geospatial visualisation taxonomies. The review was done in order to inform the design phase of the library development, such that either an existing taxonomy can be adopted or extended to fit the needs at hand. The major challenge in this case is to develop dynamic two dimensional visualisations that enable human interaction in order to assist the user to understand the data streams that are continuously being updated. This paper reviews the existing geospatial data visualisation taxonomies that have been developed over the years. Based on the review, an adopted taxonomy for visualisation of geospatial streaming data is presented. Example applications of this taxonomy are also provided. The adopted taxonomy will then be used to develop the information model for the visualisation library in a further study.

Visualisation and interaction design solutions to address specific demands in shared home care.

PubMed

Scandurra, Isabella; Hägglund, Maria; Koch, Sabine

2006-01-01

When care professionals from different organisations are involved in patient care, their different views on the care process may not be meaningfully integrated. To use visualisation and interaction design solutions addressing the specific demands of shared care in order to support a collaborative work process. Participatory design, comprising interdisciplinary seminar series with real users and iterative prototyping, was applied. A set of interaction and visualisation design solutions to address care professionals' requirements in shared home care is presented, introducing support for identifying origin of information, holistic presentation of information, user group specific visualisation, avoiding cognitive overload, coordination of work and planning, and quick overviews. The design solutions are implemented in an integrated virtual health record system supporting cooperation and coordination in shared home care for the elderly. The described requirements are, however, generalized to comprise all shared care work. The presented design considerations allow healthcare professionals in different organizations to share patient data on mobile devices. Visualization and interaction design facilitates specific work situations and assists in handling specific demands in shared care. The user interface is adapted to different user groups with similar yet distinct needs. Consequently different views supporting cooperative work and presenting shared information in holistic overviews are developed.

Gaia Data Release 1. The archive visualisation service

NASA Astrophysics Data System (ADS)

Moitinho, A.; Krone-Martins, A.; Savietto, H.; Barros, M.; Barata, C.; Falcão, A. J.; Fernandes, T.; Alves, J.; Silva, A. F.; Gomes, M.; Bakker, J.; Brown, A. G. A.; González-Núñez, J.; Gracia-Abril, G.; Gutiérrez-Sánchez, R.; Hernández, J.; Jordan, S.; Luri, X.; Merin, B.; Mignard, F.; Mora, A.; Navarro, V.; O'Mullane, W.; Sagristà Sellés, T.; Salgado, J.; Segovia, J. C.; Utrilla, E.; Arenou, F.; de Bruijne, J. H. J.; Jansen, F.; McCaughrean, M.; O'Flaherty, K. S.; Taylor, M. B.; Vallenari, A.

2017-09-01

Context. The first Gaia data release (DR1) delivered a catalogue of astrometry and photometry for over a billion astronomical sources. Within the panoplyof methods used for data exploration, visualisation is often the starting point and even the guiding reference for scientific thought. However, this is a volume of data that cannot be efficiently explored using traditional tools, techniques, and habits. Aims: We aim to provide a global visual exploration service for the Gaia archive, something that is not possible out of the box for most people. The service has two main goals. The first is to provide a software platform for interactive visual exploration of the archive contents, using common personal computers and mobile devices available to most users. The second aim is to produce intelligible and appealing visual representations of the enormous information content of the archive. Methods: The interactive exploration service follows a client-server design. The server runs close to the data, at the archive, and is responsible for hiding as far as possible the complexity and volume of the Gaia data from the client. This is achieved by serving visual detail on demand. Levels of detail are pre-computed using data aggregation and subsampling techniques. For DR1, the client is a web application that provides an interactive multi-panel visualisation workspace as well as a graphical user interface. Results: The Gaia archive Visualisation Service offers a web-based multi-panel interactive visualisation desktop in a browser tab. It currently provides highly configurable 1D histograms and 2D scatter plots of Gaia DR1 and the Tycho-Gaia Astrometric Solution (TGAS) with linked views. An innovative feature is the creation of ADQL queries from visually defined regions in plots. These visual queries are ready for use in the Gaia Archive Search/data retrieval service. In addition, regions around user-selected objects can be further examined with automatically generated SIMBAD searches. Integration of the Aladin Lite and JS9 applications add support to the visualisation of HiPS and FITS maps. The production of the all-sky source density map that became the iconic image of Gaia DR1 is described in detail. Conclusions: On the day of DR1, over seven thousand users accessed the Gaia Archive visualisation portal. The system, running on a single machine, proved robust and did not fail while enabling thousands of users to visualise and explore the over one billion sources in DR1. There are still several limitations, most noticeably that users may only choose from a list of pre-computed visualisations. Thus, other visualisation applications that can complement the archive service are examined. Finally, development plans for Data Release 2 are presented.

Tangible interactive system for document browsing and visualisation of multimedia data

NASA Astrophysics Data System (ADS)

Rytsar, Yuriy; Voloshynovskiy, Sviatoslav; Koval, Oleksiy; Deguillaume, Frederic; Topak, Emre; Startchik, Sergei; Pun, Thierry

2006-01-01

In this paper we introduce and develop a framework for document interactive navigation in multimodal databases. First, we analyze the main open issues of existing multimodal interfaces and then discuss two applications that include interaction with documents in several human environments, i.e., the so-called smart rooms. Second, we propose a system set-up dedicated to the efficient navigation in the printed documents. This set-up is based on the fusion of data from several modalities that include images and text. Both modalities can be used as cover data for hidden indexes using data-hiding technologies as well as source data for robust visual hashing. The particularities of the proposed robust visual hashing are described in the paper. Finally, we address two practical applications of smart rooms for tourism and education and demonstrate the advantages of the proposed solution.

KAGLVis - On-line 3D Visualisation of Earth-observing-satellite Data

NASA Astrophysics Data System (ADS)

Szuba, Marek; Ameri, Parinaz; Grabowski, Udo; Maatouki, Ahmad; Meyer, Jörg

2015-04-01

One of the goals of the Large-Scale Data Management and Analysis project is to provide a high-performance framework facilitating management of data acquired by Earth-observing satellites such as Envisat. On the client-facing facet of this framework, we strive to provide visualisation and basic analysis tool which could be used by scientists with minimal to no knowledge of the underlying infrastructure. Our tool, KAGLVis, is a JavaScript client-server Web application which leverages modern Web technologies to provide three-dimensional visualisation of satellite observables on a wide range of client systems. It takes advantage of the WebGL API to employ locally available GPU power for 3D rendering; this approach has been demonstrated to perform well even on relatively weak hardware such as integrated graphics chipsets found in modern laptop computers and with some user-interface tuning could even be usable on embedded devices such as smartphones or tablets. Data is fetched from the database back-end using a ReST API and cached locally, both in memory and using HTML5 Web Storage, to minimise network use. Computations, calculation of cloud altitude from cloud-index measurements for instance, can depending on configuration be performed on either the client or the server side. Keywords: satellite data, Envisat, visualisation, 3D graphics, Web application, WebGL, MEAN stack.

Digital Investigations of AN Archaeological Smart Point Cloud: a Real Time Web-Based Platform to Manage the Visualisation of Semantical Queries

NASA Astrophysics Data System (ADS)

Poux, F.; Neuville, R.; Hallot, P.; Van Wersch, L.; Luczfalvy Jancsó, A.; Billen, R.

2017-05-01

While virtual copies of the real world tend to be created faster than ever through point clouds and derivatives, their working proficiency by all professionals' demands adapted tools to facilitate knowledge dissemination. Digital investigations are changing the way cultural heritage researchers, archaeologists, and curators work and collaborate to progressively aggregate expertise through one common platform. In this paper, we present a web application in a WebGL framework accessible on any HTML5-compatible browser. It allows real time point cloud exploration of the mosaics in the Oratory of Germigny-des-Prés, and emphasises the ease of use as well as performances. Our reasoning engine is constructed over a semantically rich point cloud data structure, where metadata has been injected a priori. We developed a tool that directly allows semantic extraction and visualisation of pertinent information for the end users. It leads to efficient communication between actors by proposing optimal 3D viewpoints as a basis on which interactions can grow.

Visualising large hierarchies with Flextree

NASA Astrophysics Data System (ADS)

Song, Hongzhi; Curran, Edwin P.; Sterritt, Roy

2003-05-01

One of the main tasks in Information Visualisation research is creating visual tools to facilitate human understanding of large and complex information spaces. Hierarchies, being a good mechanism in organising such information, are ubiquitous. Although much research effort has been spent on finding useful representations for hierarchies, visualising large hierarchies is still a difficult topic. One of the difficulties is how to show both tructure and node content information in one view. Another is how to achieve multiple foci in a focus+context visualisation. This paper describes a novel hierarchy visualisation technique called FlexTree to address these problems. It contains some important features that have not been exploited so far. In this visualisation, a profile or contour unique to the hierarchy being visualised can be gained in a histogram-like layout. A normalised view of a common attribute of all nodes can be acquired, and selection of this attribute is controllable by the user. Multiple foci are consistently accessible within a global context through interaction. Furthermore it can handle a large hierarchy that contains several thousand nodes in a PC environment. In addition results from an informal evaluation are also presented.

Macro optical projection tomography for large scale 3D imaging of plant structures and gene activity

PubMed Central

Lee, Karen J. I.; Calder, Grant M.; Hindle, Christopher R.; Newman, Jacob L.; Robinson, Simon N.; Avondo, Jerome J. H. Y.

2017-01-01

Abstract Optical projection tomography (OPT) is a well-established method for visualising gene activity in plants and animals. However, a limitation of conventional OPT is that the specimen upper size limit precludes its application to larger structures. To address this problem we constructed a macro version called Macro OPT (M-OPT). We apply M-OPT to 3D live imaging of gene activity in growing whole plants and to visualise structural morphology in large optically cleared plant and insect specimens up to 60 mm tall and 45 mm deep. We also show how M-OPT can be used to image gene expression domains in 3D within fixed tissue and to visualise gene activity in 3D in clones of growing young whole Arabidopsis plants. A further application of M-OPT is to visualise plant-insect interactions. Thus M-OPT provides an effective 3D imaging platform that allows the study of gene activity, internal plant structures and plant-insect interactions at a macroscopic scale. PMID:28025317

Hazard Interactions and Interaction Networks (Cascades) within Multi-Hazard Methodologies

NASA Astrophysics Data System (ADS)

Gill, Joel; Malamud, Bruce D.

2016-04-01

Here we combine research and commentary to reinforce the importance of integrating hazard interactions and interaction networks (cascades) into multi-hazard methodologies. We present a synthesis of the differences between 'multi-layer single hazard' approaches and 'multi-hazard' approaches that integrate such interactions. This synthesis suggests that ignoring interactions could distort management priorities, increase vulnerability to other spatially relevant hazards or underestimate disaster risk. We proceed to present an enhanced multi-hazard framework, through the following steps: (i) describe and define three groups (natural hazards, anthropogenic processes and technological hazards/disasters) as relevant components of a multi-hazard environment; (ii) outline three types of interaction relationship (triggering, increased probability, and catalysis/impedance); and (iii) assess the importance of networks of interactions (cascades) through case-study examples (based on literature, field observations and semi-structured interviews). We further propose visualisation frameworks to represent these networks of interactions. Our approach reinforces the importance of integrating interactions between natural hazards, anthropogenic processes and technological hazards/disasters into enhanced multi-hazard methodologies. Multi-hazard approaches support the holistic assessment of hazard potential, and consequently disaster risk. We conclude by describing three ways by which understanding networks of interactions contributes to the theoretical and practical understanding of hazards, disaster risk reduction and Earth system management. Understanding interactions and interaction networks helps us to better (i) model the observed reality of disaster events, (ii) constrain potential changes in physical and social vulnerability between successive hazards, and (iii) prioritise resource allocation for mitigation and disaster risk reduction.

Refined views of multi-protein complexes in the erythrocyte membrane

PubMed Central

Mankelow, TJ; Satchwell, TJ; Burton, NM

2015-01-01

The erythrocyte membrane has been extensively studied, both as a model membrane system and to investigate its role in gas exchange and transport. Much is now known about the protein components of the membrane, how they are organised into large multi-protein complexes and how they interact with each other within these complexes. Many links between the membrane and the cytoskeleton have also been delineated and have been demonstrated to be crucial for maintaining the deformability and integrity of the erythrocyte. In this study we have refined previous, highly speculative molecular models of these complexes by including the available data pertaining to known protein-protein interactions. While the refined models remain highly speculative, they provide an evolving framework for visualisation of these important cellular structures at the atomic level. PMID:22465511

The Selimiye Mosque of Edirne, Turkey - AN Immersive and Interactive Virtual Reality Experience Using Htc Vive

NASA Astrophysics Data System (ADS)

Kersten, T. P.; Büyüksalih, G.; Tschirschwitz, F.; Kan, T.; Deggim, S.; Kaya, Y.; Baskaraca, A. P.

2017-05-01

Recent advances in contemporary Virtual Reality (VR) technologies are going to have a significant impact on veryday life. Through VR it is possible to virtually explore a computer-generated environment as a different reality, and to immerse oneself into the past or in a virtual museum without leaving the current real-life situation. For such the ultimate VR experience, the user should only see the virtual world. Currently, the user must wear a VR headset which fits around the head and over the eyes to visually separate themselves from the physical world. Via the headset images are fed to the eyes through two small lenses. Cultural heritage monuments are ideally suited both for thorough multi-dimensional geometric documentation and for realistic interactive visualisation in immersive VR applications. Additionally, the game industry offers tools for interactive visualisation of objects to motivate users to virtually visit objects and places. In this paper the generation of a virtual 3D model of the Selimiye mosque in the city of Edirne, Turkey and its processing for data integration into the game engine Unity is presented. The project has been carried out as a co-operation between BİMTAŞ, a company of the Greater Municipality of Istanbul, Turkey and the Photogrammetry & Laser Scanning Lab of the HafenCity University Hamburg, Germany to demonstrate an immersive and interactive visualisation using the new VR system HTC Vive. The workflow from data acquisition to VR visualisation, including the necessary programming for navigation, is described. Furthermore, the possible use (including simultaneous multiple users environments) of such a VR visualisation for a CH monument is discussed in this contribution.

Does Teaching Sequence Matter When Teaching High School Chemistry with Scientific Visualisations?

ERIC Educational Resources Information Center

Fogarty, Ian; Geelan, David; Mukherjee, Michelle

2012-01-01

Five Canadian high school Chemistry classes in one school, taught by three different teachers, studied the concepts of dynamic chemical equilibria and Le Chatelier's Principle. Some students received traditional teacher-led explanations of the concept first and used an interactive scientific visualisation second, while others worked with the…

Assessment of a Bayesian Belief Network-GIS framework as a practical tool to support marine planning.

PubMed

Stelzenmüller, V; Lee, J; Garnacho, E; Rogers, S I

2010-10-01

For the UK continental shelf we developed a Bayesian Belief Network-GIS framework to visualise relationships between cumulative human pressures, sensitive marine landscapes and landscape vulnerability, to assess the consequences of potential marine planning objectives, and to map uncertainty-related changes in management measures. Results revealed that the spatial assessment of footprints and intensities of human activities had more influence on landscape vulnerabilities than the type of landscape sensitivity measure used. We addressed questions regarding consequences of potential planning targets, and necessary management measures with spatially-explicit assessment of their consequences. We conclude that the BN-GIS framework is a practical tool allowing for the visualisation of relationships, the spatial assessment of uncertainty related to spatial management scenarios, the engagement of different stakeholder views, and enables a quick update of new spatial data and relationships. Ultimately, such BN-GIS based tools can support the decision-making process used in adaptive marine management. Copyright © 2010 Elsevier Ltd. All rights reserved.

Integrating geo web services for a user driven exploratory analysis

NASA Astrophysics Data System (ADS)

Moncrieff, Simon; Turdukulov, Ulanbek; Gulland, Elizabeth-Kate

2016-04-01

In data exploration, several online data sources may need to be dynamically aggregated or summarised over spatial region, time interval, or set of attributes. With respect to thematic data, web services are mainly used to present results leading to a supplier driven service model limiting the exploration of the data. In this paper we propose a user need driven service model based on geo web processing services. The aim of the framework is to provide a method for the scalable and interactive access to various geographic data sources on the web. The architecture combines a data query, processing technique and visualisation methodology to rapidly integrate and visually summarise properties of a dataset. We illustrate the environment on a health related use case that derives Age Standardised Rate - a dynamic index that needs integration of the existing interoperable web services of demographic data in conjunction with standalone non-spatial secure database servers used in health research. Although the example is specific to the health field, the architecture and the proposed approach are relevant and applicable to other fields that require integration and visualisation of geo datasets from various web services and thus, we believe is generic in its approach.

Exploring Students' Visual Conception of Matter: Towards Developing a Teaching Framework Using Models

ERIC Educational Resources Information Center

Espinosa, Allen A.; Marasigan, Arlyne C.; Datukan, Janir T.

2016-01-01

This study explored how students visualise the states and classifications of matter with the use of scientific models. Misconceptions of students in using scientific models were also identified to formulate a teaching framework. To elicit data in the study, a Visual Conception Questionnaire was administered to thirty-four (34), firstyear, general…

Using Jupyter Notebooks for Interactive Space Science Simulations

NASA Astrophysics Data System (ADS)

Schmidt, Albrecht

2016-04-01

Jupyter Notebooks can be used as an effective means to communicate scientific ideas through Web-based visualisations and, at the same time, give a user more than a pre-defined set of options to manipulate the visualisations. To some degree, even computations can be done without too much knowledge of the underlying data structures and infrastructure to discover novel aspects of the data or tailor view to users' needs. Here, we show how to combine Jupyter Notebooks with other open-source tools to provide rich and interactive views on space data, especially the visualisation of spacecraft operations. Topics covered are orbit visualisation, spacecraft orientation, instrument timelines as well as performance analysis of mission segments. Technically, also the re-use and integration of existing components will be shown, both on the code level as well on the visualisation level so that the effort which was put into the development of new components could be reduced. Another important aspect is the bridging of the gap between operational data and the scientific exploitation of the payload data, for which also a way forward will be shown. A lesson learned from the implementation and use of a prototype is the synergy between the team who provisions the notebooks and the consumers, who both share access to the same code base, if not resources; this often simplifies communication and deployment.

Visualizing astronomy data using VRML

NASA Astrophysics Data System (ADS)

Beeson, Brett; Lancaster, Michael; Barnes, David G.; Bourke, Paul D.; Rixon, Guy T.

2004-09-01

Visualisation is a powerful tool for understanding the large data sets typical of astronomical surveys and can reveal unsuspected relationships and anomalous regions of parameter space which may be difficult to find programatically. Visualisation is a classic information technology for optimising scientific return. We are developing a number of generic on-line visualisation tools as a component of the Australian Virtual Observatory project. The tools will be deployed within the framework of the International Virtual Observatory Alliance (IVOA), and follow agreed-upon standards to make them accessible by other programs and people. We and our IVOA partners plan to utilise new information technologies (such as grid computing and web services) to advance the scientific return of existing and future instrumentation. Here we present a new tool - VOlume - which visualises point data. Visualisation of astronomical data normally requires the local installation of complex software, the downloading of potentially large datasets, and very often time-consuming and tedious data format conversions. VOlume enables the astronomer to visualise data using just a web browser and plug-in. This is achieved using IVOA standards which allow us to pass data between Web Services, Java Servlet Technology and Common Gateway Interface programs. Data from a catalogue server can be streamed in eXtensible Mark-up Language format to a servlet which produces Virtual Reality Modeling Language output. The user selects elements of the catalogue to map to geometry and then visualises the result in a browser plug-in such as Cortona or FreeWRL. Other than requiring an input VOTable format file, VOlume is very general. While its major use will likely be to display and explore astronomical source catalogues, it can easily render other important parameter fields such as the sky and redshift coverage of proposed surveys or the sampling of the visibility plane by a rotation-synthesis interferometer.

The role of 3D visualisation as an analytical tool preparatory to numerical modelling [rapid communication

NASA Astrophysics Data System (ADS)

Robins, N. S.; Rutter, H. K.; Dumpleton, S.; Peach, D. W.

2005-01-01

Groundwater investigation has long depended on the process of developing a conceptual flow model as a precursor to developing a mathematical model, which in turn may lead in complex aquifers to the development of a numerical approximation model. The assumptions made in the development of the conceptual model depend heavily on the geological framework defining the aquifer, and if the conceptual model is inappropriate then subsequent modelling will also be incorrect. Paradoxically, the development of a robust conceptual model remains difficult, not least because this 3D paradigm is usually reduced to 2D plans and sections. 3D visualisation software is now available to facilitate the development of the conceptual model, to make the model more robust and defensible and to assist in demonstrating the hydraulics of the aquifer system. Case studies are presented to demonstrate the role and cost-effectiveness of the visualisation process.

Frog: The fast & realistic OpenGL event displayer

NASA Astrophysics Data System (ADS)

Quertenmont, Loïc

2010-04-01

FROG [1] [2] is a generic framework dedicated to visualisation of events in high energy physics experiment. It is suitable to any particular physics experiment or detector design. The code is light (< 3 MB) and fast (browsing time ~ 20 events per second for a large High Energy Physics experiment) and can run on various operating systems, as its object-oriented structure (C++) relies on the cross-platform OpenGL[3] and Glut [4] libraries. Moreover, Frog does not require installation of heavy third party libraries for the visualisation. This documents describes the features and principles of Frog version 1.106, its working scheme and numerous functionalities such as: 3D and 2D visualisation, graphical user interface, mouse interface, configuration files, production of pictures of various format, integration of personal objects, etc. Finally the application of FROG for physic experiment/environement, such as Gastof, CMS, ILD, Delphes will be presented for illustration.

Integrated presentation of ecological risk from multiple stressors

NASA Astrophysics Data System (ADS)

Goussen, Benoit; Price, Oliver R.; Rendal, Cecilie; Ashauer, Roman

2016-10-01

Current environmental risk assessments (ERA) do not account explicitly for ecological factors (e.g. species composition, temperature or food availability) and multiple stressors. Assessing mixtures of chemical and ecological stressors is needed as well as accounting for variability in environmental conditions and uncertainty of data and models. Here we propose a novel probabilistic ERA framework to overcome these limitations, which focusses on visualising assessment outcomes by construct-ing and interpreting prevalence plots as a quantitative prediction of risk. Key components include environmental scenarios that integrate exposure and ecology, and ecological modelling of relevant endpoints to assess the effect of a combination of stressors. Our illustrative results demonstrate the importance of regional differences in environmental conditions and the confounding interactions of stressors. Using this framework and prevalence plots provides a risk-based approach that combines risk assessment and risk management in a meaningful way and presents a truly mechanistic alternative to the threshold approach. Even whilst research continues to improve the underlying models and data, regulators and decision makers can already use the framework and prevalence plots. The integration of multiple stressors, environmental conditions and variability makes ERA more relevant and realistic.

Integrated presentation of ecological risk from multiple stressors.

PubMed

Goussen, Benoit; Price, Oliver R; Rendal, Cecilie; Ashauer, Roman

2016-10-26

Current environmental risk assessments (ERA) do not account explicitly for ecological factors (e.g. species composition, temperature or food availability) and multiple stressors. Assessing mixtures of chemical and ecological stressors is needed as well as accounting for variability in environmental conditions and uncertainty of data and models. Here we propose a novel probabilistic ERA framework to overcome these limitations, which focusses on visualising assessment outcomes by construct-ing and interpreting prevalence plots as a quantitative prediction of risk. Key components include environmental scenarios that integrate exposure and ecology, and ecological modelling of relevant endpoints to assess the effect of a combination of stressors. Our illustrative results demonstrate the importance of regional differences in environmental conditions and the confounding interactions of stressors. Using this framework and prevalence plots provides a risk-based approach that combines risk assessment and risk management in a meaningful way and presents a truly mechanistic alternative to the threshold approach. Even whilst research continues to improve the underlying models and data, regulators and decision makers can already use the framework and prevalence plots. The integration of multiple stressors, environmental conditions and variability makes ERA more relevant and realistic.

Hazard interactions and interaction networks (cascades) within multi-hazard methodologies

NASA Astrophysics Data System (ADS)

Gill, Joel C.; Malamud, Bruce D.

2016-08-01

This paper combines research and commentary to reinforce the importance of integrating hazard interactions and interaction networks (cascades) into multi-hazard methodologies. We present a synthesis of the differences between multi-layer single-hazard approaches and multi-hazard approaches that integrate such interactions. This synthesis suggests that ignoring interactions between important environmental and anthropogenic processes could distort management priorities, increase vulnerability to other spatially relevant hazards or underestimate disaster risk. In this paper we proceed to present an enhanced multi-hazard framework through the following steps: (i) description and definition of three groups (natural hazards, anthropogenic processes and technological hazards/disasters) as relevant components of a multi-hazard environment, (ii) outlining of three types of interaction relationship (triggering, increased probability, and catalysis/impedance), and (iii) assessment of the importance of networks of interactions (cascades) through case study examples (based on the literature, field observations and semi-structured interviews). We further propose two visualisation frameworks to represent these networks of interactions: hazard interaction matrices and hazard/process flow diagrams. Our approach reinforces the importance of integrating interactions between different aspects of the Earth system, together with human activity, into enhanced multi-hazard methodologies. Multi-hazard approaches support the holistic assessment of hazard potential and consequently disaster risk. We conclude by describing three ways by which understanding networks of interactions contributes to the theoretical and practical understanding of hazards, disaster risk reduction and Earth system management. Understanding interactions and interaction networks helps us to better (i) model the observed reality of disaster events, (ii) constrain potential changes in physical and social vulnerability between successive hazards, and (iii) prioritise resource allocation for mitigation and disaster risk reduction.

Visualising interacting binaries in 3D

NASA Astrophysics Data System (ADS)

Hynes, R. I.

2002-01-01

I have developed a code which allows images to be produced of a variety of interacting binaries for any system parameters. The resulting images are not only helpful in visualising the geometry of a given system but are also helpful in talks and educational work. I would like to acknowledge financial support from the Leverhulme Trust, and to thank Dan Rolfe for many discussions on how to represent interacting binaries and the users of BinSim who have provided valuable testing and feedback. BinSim would not have been possible without the efforts of Brian Paul and others responsible for the Mesa 3-D graphics library -- Mesa 3-D graphics .

Sequence Bundles: a novel method for visualising, discovering and exploring sequence motifs

PubMed Central

2014-01-01

Background We introduce Sequence Bundles--a novel data visualisation method for representing multiple sequence alignments (MSAs). We identify and address key limitations of the existing bioinformatics data visualisation methods (i.e. the Sequence Logo) by enabling Sequence Bundles to give salient visual expression to sequence motifs and other data features, which would otherwise remain hidden. Methods For the development of Sequence Bundles we employed research-led information design methodologies. Sequences are encoded as uninterrupted, semi-opaque lines plotted on a 2-dimensional reconfigurable grid. Each line represents a single sequence. The thickness and opacity of the stack at each residue in each position indicates the level of conservation and the lines' curved paths expose patterns in correlation and functionality. Several MSAs can be visualised in a composite image. The Sequence Bundles method is designed to favour a tangible, continuous and intuitive display of information. Results We have developed a software demonstration application for generating a Sequence Bundles visualisation of MSAs provided for the BioVis 2013 redesign contest. A subsequent exploration of the visualised line patterns allowed for the discovery of a number of interesting features in the dataset. Reported features include the extreme conservation of sequences displaying a specific residue and bifurcations of the consensus sequence. Conclusions Sequence Bundles is a novel method for visualisation of MSAs and the discovery of sequence motifs. It can aid in generating new insight and hypothesis making. Sequence Bundles is well disposed for future implementation as an interactive visual analytics software, which can complement existing visualisation tools. PMID:25237395

"Where On Mars?": An Open Planetary Mapping Platform for Researchers, Educators, and the General Public

NASA Astrophysics Data System (ADS)

Manaud, Nicolas; Carter, John; Boix, Oriol

2016-10-01

The "Where On Mars?" project is essentially the evolution of an existing outreach product developed in collaboration between ESA and CartoDB; an interactive map visualisation of the ESA's ExoMars Rover candidate landing sites (whereonmars.co). Planetary imagery data and maps are increasingly produced by the scientific community, and shared typically as images, in scientific publications, presentations or public outreach websites. However, this media lacks of interactivity and contextual information available for further exploration, making it difficult for any audience to relate one location-based information to another. We believe that interactive web maps are a powerful way of telling stories, engaging with and educating people who, over the last decade, have become familiar with tools such as Google Maps. A few planetary web maps exist but they are either too complex for non-experts, or are closed-systems that do not allows anyone to publish and share content. The long-term vision for the project is to provide researchers, communicators, educators and a worldwide public with an open planetary mapping and social platform enabling them to create, share, communicate and consume research-based content. We aim for this platform to become the reference website everyone will go to learn about Mars and other planets in our Solar System; just like people head to Google Maps to find their bearings or any location-based information. The driver is clearly to create for people an emotional connection with Mars. The short-term objectives for the project are (1) to produce and curate an open repository of basemaps, geospatial data sets, map visualisations, and story maps; (2) to develop a beautifully crafted and engaging interactive map of Mars. Based on user-generated content, the underlying framework should (3) make it easy to create and share additional interactive maps telling specific stories.

Framing ICT-Enabled Innovation for Learning: The Case of One-to-One Learning Initiatives in Europe

ERIC Educational Resources Information Center

Bocconi, Stefania; Kampylis, Panagiotis; Punie, Yves

2013-01-01

This article discusses 1:1 learning initiatives in Europe in the context of a mapping framework of ICT-enabled innovation for learning. The aim of the framework, visualised as a spider's web, is two-fold: (i) to provide a further understanding of the nature of ICT-enabled innovation for learning; and (ii) to depict the impact of existing and…

a Geo-Visual Analytics Approach to Biological Shepherding: Modelling Animal Movements and Impacts

NASA Astrophysics Data System (ADS)

Benke, K. K.; Sheth, F.; Betteridge, K.; Pettit, C. J.; Aurambout, J.-P.

2012-07-01

The lamb industry in Victoria is a significant component of the state economy with annual exports in the vicinity of 1 billion. GPS and visualisation tools can be used to monitor grazing animal movements at the farm scale and observe interactions with the environment. Modelling the spatial-temporal movements of grazing animals in response to environmental conditions provides input for the design of paddocks with the aim of improving management procedures, animal performance and animal welfare. The term "biological shepherding" is associated with the re-design of environmental conditions and the analysis of responses from grazing animals. The combination of biological shepherding with geo-visual analytics (geo-spatial data analysis with visualisation) provides a framework for improving landscape design and supports research in grazing behaviour in variable landscapes, heat stress avoidance behaviour during summer months, and modelling excreta distributions (with respect to nitrogen emissions and nitrogen return for fertilising the paddock). Nitrogen losses due to excreta are mainly in the form of gaseous emissions to the atmosphere and leaching into the groundwater. In this study, background and context are provided in the case of biological shepherding and tracking animal movements. Examples are provided of recent applications in regional Australia and New Zealand. Based on experimental data and computer simulation, and using data visualisation and feature extraction, it was demonstrated that livestock excreta are not always randomly located, but concentrated around localised gathering points, sometimes separated by the nature of the excretion. Farmers require information on the nitrogen losses in order to reduce emissions to meet local and international nitrogen leaching and greenhouse gas targets and to improve the efficiency of nutrient management.

Breaking free from chemical spreadsheets.

PubMed

Segall, Matthew; Champness, Ed; Leeding, Chris; Chisholm, James; Hunt, Peter; Elliott, Alex; Garcia-Martinez, Hector; Foster, Nick; Dowling, Samuel

2015-09-01

Drug discovery scientists often consider compounds and data in terms of groups, such as chemical series, and relationships, representing similarity or structural transformations, to aid compound optimisation. This is often supported by chemoinformatics algorithms, for example clustering and matched molecular pair analysis. However, chemistry software packages commonly present these data as spreadsheets or form views that make it hard to find relevant patterns or compare related compounds conveniently. Here, we review common data visualisation and analysis methods used to extract information from chemistry data. We introduce a new framework that enables scientists to work flexibly with drug discovery data to reflect their thought processes and interact with the output of algorithms to identify key structure-activity relationships and guide further optimisation intuitively. Copyright © 2015 Elsevier Ltd. All rights reserved.

BioLayout(Java): versatile network visualisation of structural and functional relationships.

PubMed

Goldovsky, Leon; Cases, Ildefonso; Enright, Anton J; Ouzounis, Christos A

2005-01-01

Visualisation of biological networks is becoming a common task for the analysis of high-throughput data. These networks correspond to a wide variety of biological relationships, such as sequence similarity, metabolic pathways, gene regulatory cascades and protein interactions. We present a general approach for the representation and analysis of networks of variable type, size and complexity. The application is based on the original BioLayout program (C-language implementation of the Fruchterman-Rheingold layout algorithm), entirely re-written in Java to guarantee portability across platforms. BioLayout(Java) provides broader functionality, various analysis techniques, extensions for better visualisation and a new user interface. Examples of analysis of biological networks using BioLayout(Java) are presented.

Interactive Notebooks for Operational Meteorology

NASA Astrophysics Data System (ADS)

Prudden, R.; Robinson, N.; Arribas, A.

2016-12-01

Operational meteorologists are under pressure to analyse weather forecast data quickly and accurately. However, the volume and complexity of the data make this a challenge. In particular, the number of relevant dimensions (spatial, time, altitude, and ensemble member) make visualising the data difficult. It is also desirable to combine other data sources such as climatology, which complicates things further. Interactive notebooks such as Jupyter can provide a highly flexible tool for this kind of data exploration. The power of this approach is that it gives the user full control over their analysis, providing a simple way to combine different maps, plots and graphs using existing libraries. This talk will demonstrate how notebooks can be useful in operational meteorology, and show some examples of interactive data visualisation.

Smart Point Cloud: Definition and Remaining Challenges

NASA Astrophysics Data System (ADS)

Poux, F.; Hallot, P.; Neuville, R.; Billen, R.

2016-10-01

Dealing with coloured point cloud acquired from terrestrial laser scanner, this paper identifies remaining challenges for a new data structure: the smart point cloud. This concept arises with the statement that massive and discretized spatial information from active remote sensing technology is often underused due to data mining limitations. The generalisation of point cloud data associated with the heterogeneity and temporality of such datasets is the main issue regarding structure, segmentation, classification, and interaction for an immediate understanding. We propose to use both point cloud properties and human knowledge through machine learning to rapidly extract pertinent information, using user-centered information (smart data) rather than raw data. A review of feature detection, machine learning frameworks and database systems indexed both for mining queries and data visualisation is studied. Based on existing approaches, we propose a new 3-block flexible framework around device expertise, analytic expertise and domain base reflexion. This contribution serves as the first step for the realisation of a comprehensive smart point cloud data structure.

Review: visual analytics of climate networks

NASA Astrophysics Data System (ADS)

Nocke, T.; Buschmann, S.; Donges, J. F.; Marwan, N.; Schulz, H.-J.; Tominski, C.

2015-09-01

Network analysis has become an important approach in studying complex spatiotemporal behaviour within geophysical observation and simulation data. This new field produces increasing numbers of large geo-referenced networks to be analysed. Particular focus lies currently on the network analysis of the complex statistical interrelationship structure within climatological fields. The standard procedure for such network analyses is the extraction of network measures in combination with static standard visualisation methods. Existing interactive visualisation methods and tools for geo-referenced network exploration are often either not known to the analyst or their potential is not fully exploited. To fill this gap, we illustrate how interactive visual analytics methods in combination with geovisualisation can be tailored for visual climate network investigation. Therefore, the paper provides a problem analysis relating the multiple visualisation challenges to a survey undertaken with network analysts from the research fields of climate and complex systems science. Then, as an overview for the interested practitioner, we review the state-of-the-art in climate network visualisation and provide an overview of existing tools. As a further contribution, we introduce the visual network analytics tools CGV and GTX, providing tailored solutions for climate network analysis, including alternative geographic projections, edge bundling, and 3-D network support. Using these tools, the paper illustrates the application potentials of visual analytics for climate networks based on several use cases including examples from global, regional, and multi-layered climate networks.

Review: visual analytics of climate networks

NASA Astrophysics Data System (ADS)

Nocke, T.; Buschmann, S.; Donges, J. F.; Marwan, N.; Schulz, H.-J.; Tominski, C.

2015-04-01

Network analysis has become an important approach in studying complex spatiotemporal behaviour within geophysical observation and simulation data. This new field produces increasing amounts of large geo-referenced networks to be analysed. Particular focus lies currently on the network analysis of the complex statistical interrelationship structure within climatological fields. The standard procedure for such network analyses is the extraction of network measures in combination with static standard visualisation methods. Existing interactive visualisation methods and tools for geo-referenced network exploration are often either not known to the analyst or their potential is not fully exploited. To fill this gap, we illustrate how interactive visual analytics methods in combination with geovisualisation can be tailored for visual climate network investigation. Therefore, the paper provides a problem analysis, relating the multiple visualisation challenges with a survey undertaken with network analysts from the research fields of climate and complex systems science. Then, as an overview for the interested practitioner, we review the state-of-the-art in climate network visualisation and provide an overview of existing tools. As a further contribution, we introduce the visual network analytics tools CGV and GTX, providing tailored solutions for climate network analysis, including alternative geographic projections, edge bundling, and 3-D network support. Using these tools, the paper illustrates the application potentials of visual analytics for climate networks based on several use cases including examples from global, regional, and multi-layered climate networks.

Integrated presentation of ecological risk from multiple stressors

PubMed Central

Goussen, Benoit; Price, Oliver R.; Rendal, Cecilie; Ashauer, Roman

2016-01-01

Current environmental risk assessments (ERA) do not account explicitly for ecological factors (e.g. species composition, temperature or food availability) and multiple stressors. Assessing mixtures of chemical and ecological stressors is needed as well as accounting for variability in environmental conditions and uncertainty of data and models. Here we propose a novel probabilistic ERA framework to overcome these limitations, which focusses on visualising assessment outcomes by construct-ing and interpreting prevalence plots as a quantitative prediction of risk. Key components include environmental scenarios that integrate exposure and ecology, and ecological modelling of relevant endpoints to assess the effect of a combination of stressors. Our illustrative results demonstrate the importance of regional differences in environmental conditions and the confounding interactions of stressors. Using this framework and prevalence plots provides a risk-based approach that combines risk assessment and risk management in a meaningful way and presents a truly mechanistic alternative to the threshold approach. Even whilst research continues to improve the underlying models and data, regulators and decision makers can already use the framework and prevalence plots. The integration of multiple stressors, environmental conditions and variability makes ERA more relevant and realistic. PMID:27782171

Visualisation methods for large provenance collections in data-intensive collaborative platforms

NASA Astrophysics Data System (ADS)

Spinuso, Alessandro; Fligueira, Rosa; Atkinson, Malcolm; Gemuend, Andre

2016-04-01

This work investigates improving the methods of visually representing provenance information in the context of modern data-driven scientific research. It explores scenarios where data-intensive workflows systems are serving communities of researchers within collaborative environments, supporting the sharing of data and methods, and offering a variety of computation facilities, including HPC, HTC and Cloud. It focuses on the exploration of big-data visualization techniques aiming at producing comprehensive and interactive views on top of large and heterogeneous provenance data. The same approach is applicable to control-flow and data-flow workflows or to combinations of the two. This flexibility is achieved using the W3C-PROV recommendation as a reference model, especially its workflow oriented profiles such as D-PROV (Messier et al. 2013). Our implementation is based on the provenance records produced by the dispel4py data-intensive processing library (Filgueira et al. 2015). dispel4py is an open-source Python framework for describing abstract stream-based workflows for distributed data-intensive applications, developed during the VERCE project. dispel4py enables scientists to develop their scientific methods and applications on their laptop and then run them at scale on a wide range of e-Infrastructures (Cloud, Cluster, etc.) without making changes. Users can therefore focus on designing their workflows at an abstract level, describing actions, input and output streams, and how they are connected. The dispel4py system then maps these descriptions to the enactment platforms, such as MPI, Storm, multiprocessing. It provides a mechanism which allows users to determine the provenance information to be collected and to analyze it at runtime. For this work we consider alternative visualisation methods for provenance data, from infinite lists and localised interactive graphs, to radial-views. The latter technique has been positively explored in many fields, from text data visualisation to genomics and social networking analysis. Its adoption for provenance has been presented in literature (Borkin et al. 2013) in the context of parent-child relationships across processes, constructed from control-flow information. Computer graphics research has focused on the advantage of this radial distribution of interlinked information and on ways to improve the visual efficiency and tunability of such representations, like the Hierarchical Edge Bundles visualisation method, (Holten et al. 2006), which aims at reducing visual clutter of highly connected structures via the generation of bundles. Our approach explores the potential of the combination of these methods. It serves environments where the size of the provenance collection, coupled with the diversity of the infrastructures and the domain metadata, make the extrapolation of usage trends extremely challenging. Applications of such visualisation systems can engage groups of scientists, data providers and computational engineers, by serving visual snapshots that highlight relationships between an item and its connected processes. We will present examples of comprehensive views on the distribution of processing and data transfers during a workflow's execution in HPC, as well as cross workflows interactions and internal dynamics. The latter in the context of faceted searches on domain metadata values-range. These are obtained from the analysis of real provenance data generated by the processing of seismic traces performed through the VERCE platform.

OLSVis: an animated, interactive visual browser for bio-ontologies

PubMed Central

2012-01-01

Background More than one million terms from biomedical ontologies and controlled vocabularies are available through the Ontology Lookup Service (OLS). Although OLS provides ample possibility for querying and browsing terms, the visualization of parts of the ontology graphs is rather limited and inflexible. Results We created the OLSVis web application, a visualiser for browsing all ontologies available in the OLS database. OLSVis shows customisable subgraphs of the OLS ontologies. Subgraphs are animated via a real-time force-based layout algorithm which is fully interactive: each time the user makes a change, e.g. browsing to a new term, hiding, adding, or dragging terms, the algorithm performs smooth and only essential reorganisations of the graph. This assures an optimal viewing experience, because subsequent screen layouts are not grossly altered, and users can easily navigate through the graph. URL: http://ols.wordvis.com Conclusions The OLSVis web application provides a user-friendly tool to visualise ontologies from the OLS repository. It broadens the possibilities to investigate and select ontology subgraphs through a smooth visualisation method. PMID:22646023

The ethics of Google Earth: crossing thresholds from spatial data to landscape visualisation.

PubMed

Sheppard, Stephen R J; Cizek, Petr

2009-05-01

'Virtual globe' software systems such as Google Earth are growing rapidly in popularity as a way to visualise and share 3D environmental data. Scientists and environmental professionals, many of whom are new to 3D modeling and visual communications, are beginning routinely to use such techniques in their work. While the appeal of these techniques is evident, with unprecedented opportunities for public access to data and collaborative engagement over the web, are there nonetheless risks in their widespread usage when applied in areas of the public interest such as planning and policy-making? This paper argues that the Google Earth phenomenon, which features realistic imagery of places, cannot be dealt with only as a question of spatial data and geographic information science. The virtual globe type of visualisation crosses several key thresholds in communicating scientific and environmental information, taking it well beyond the realm of conventional spatial data and geographic information science, and engaging more complex dimensions of human perception and aesthetic preference. The realism, perspective views, and social meanings of the landscape visualisations embedded in virtual globes invoke not only cognition but also emotional and intuitive responses, with associated issues of uncertainty, credibility, and bias in interpreting the imagery. This paper considers the types of risks as well as benefits that may exist with participatory uses of virtual globes by experts and lay-people. It is illustrated with early examples from practice and relevant themes from the literature in landscape visualisation and related disciplines such as environmental psychology and landscape planning. Existing frameworks and principles for the appropriate use of environmental visualisation methods are applied to the special case of widely accessible, realistic 3D and 4D visualisation systems such as Google Earth, in the context of public awareness-building and agency decision-making on environmental issues. Relevant principles are suggested which lend themselves to much-needed evaluation of risks and benefits of virtual globe systems. Possible approaches for balancing these benefits and risks include codes of ethics, software design, and metadata templates.

Approaches to integrating indicators into 3D landscape visualisations and their benefits for participative planning situations.

PubMed

Wissen, Ulrike; Schroth, Olaf; Lange, Eckart; Schmid, Willy A

2008-11-01

In discussing issues of landscape change, the complex relationships in the landscape have to be assessed. In participative planning processes, 3D visualisations have a high potential as an aid in understanding and communicating characteristics of landscape conditions by integrating visual and non-visual landscape information. Unclear is, which design and how much interactivity is required for an indicator visualisation that would suit stakeholders best in workshop situations. This paper describes the preparation and application of three different types of integrated 3D visualisations in workshops conducted in the Entlebuch UNESCO Biosphere Reserve (CH). The results reveal that simple representations of a complex issue created by draping thematic maps on the 3D model can make problematic developments visible at a glance; that diagrams linked to the spatial context can help draw attention to problematic relationships not considered beforehand; and that the size of species as indicators of conditions of the landscape's production and biotope function seems to provide a common language for stakeholders with different perspectives. Overall, the of the indicators the functions required to assist in information processing. Further research should focus on testing the effectiveness of the integrated visualisation tools in participative processes for the general public.

VisEL: Visualisation of Expertise Level in a Special Interest Group Knowledge Portal

NASA Astrophysics Data System (ADS)

Zulhafizsyam Wan Ahmad, Wan Muhammad; Sulaiman, Shahida; Yusof, Umi Kalsom

A variety of portals are available nowadays to support diverse purposes such as commercial, publishing, personal, affinity and corporate portals. Affinity portals promote electronic communities who share common interest such as a special interest group (SIG). Knowledge portal is an emerging trend that benefits the existing portal technology by designing such portals with proper representation of the members' shared knowledge. Besides textual representation for diverse expertise levels, graphical visualisation will be able to support the requirements in searching and representing expertise level among e-community. There is a number of existing SIG portals available. However, they do not visualise effectively and accurately the expertise level of members and make it difficult for users to search their targeted experts for instance searching the highest expertise level to have a discussion and to solve their problems related to a project. The goal of this paper is to propose a graphical visualisation of expertise level method (VisEL) using an interactive tag cloud technique that represents expertise level of each member based on their knowledge in a software engineering SIG portal.

Neutron imaging data processing using the Mantid framework

NASA Astrophysics Data System (ADS)

Pouzols, Federico M.; Draper, Nicholas; Nagella, Sri; Yang, Erica; Sajid, Ahmed; Ross, Derek; Ritchie, Brian; Hill, John; Burca, Genoveva; Minniti, Triestino; Moreton-Smith, Christopher; Kockelmann, Winfried

2016-09-01

Several imaging instruments are currently being constructed at neutron sources around the world. The Mantid software project provides an extensible framework that supports high-performance computing for data manipulation, analysis and visualisation of scientific data. At ISIS, IMAT (Imaging and Materials Science & Engineering) will offer unique time-of-flight neutron imaging techniques which impose several software requirements to control the data reduction and analysis. Here we outline the extensions currently being added to Mantid to provide specific support for neutron imaging requirements.

The Ensembl genome database project.

PubMed

Hubbard, T; Barker, D; Birney, E; Cameron, G; Chen, Y; Clark, L; Cox, T; Cuff, J; Curwen, V; Down, T; Durbin, R; Eyras, E; Gilbert, J; Hammond, M; Huminiecki, L; Kasprzyk, A; Lehvaslaiho, H; Lijnzaad, P; Melsopp, C; Mongin, E; Pettett, R; Pocock, M; Potter, S; Rust, A; Schmidt, E; Searle, S; Slater, G; Smith, J; Spooner, W; Stabenau, A; Stalker, J; Stupka, E; Ureta-Vidal, A; Vastrik, I; Clamp, M

2002-01-01

The Ensembl (http://www.ensembl.org/) database project provides a bioinformatics framework to organise biology around the sequences of large genomes. It is a comprehensive source of stable automatic annotation of the human genome sequence, with confirmed gene predictions that have been integrated with external data sources, and is available as either an interactive web site or as flat files. It is also an open source software engineering project to develop a portable system able to handle very large genomes and associated requirements from sequence analysis to data storage and visualisation. The Ensembl site is one of the leading sources of human genome sequence annotation and provided much of the analysis for publication by the international human genome project of the draft genome. The Ensembl system is being installed around the world in both companies and academic sites on machines ranging from supercomputers to laptops.

Strategy combination during execution of memory strategies in young and older adults.

PubMed

Hinault, Thomas; Lemaire, Patrick; Touron, Dayna

2017-05-01

The present study investigated whether people can combine two memory strategies to encode pairs of words more efficiently than with a single strategy, and age-related differences in such strategy combination. Young and older adults were asked to encode pairs of words (e.g., satellite-tunnel). For each item, participants were told to use either the interactive-imagery strategy (e.g., mentally visualising the two words and making them interact), the sentence-generation strategy (i.e., generate a sentence linking the two words), or with strategy combination (i.e., generating a sentence while mentally visualising it). Participants obtained better recall performance on items encoded with strategy combination than on items encoded with interactive-imagery or sentence-generation strategies. Moreover, we found age-related decline in such strategy combination. These findings have important implications to further our understanding of execution of memory strategies, and suggest that strategy combination occurs in a variety of cognitive domains.

Streaming visualisation of quantitative mass spectrometry data based on a novel raw signal decomposition method

PubMed Central

Zhang, Yan; Bhamber, Ranjeet; Riba-Garcia, Isabel; Liao, Hanqing; Unwin, Richard D; Dowsey, Andrew W

2015-01-01

As data rates rise, there is a danger that informatics for high-throughput LC-MS becomes more opaque and inaccessible to practitioners. It is therefore critical that efficient visualisation tools are available to facilitate quality control, verification, validation, interpretation, and sharing of raw MS data and the results of MS analyses. Currently, MS data is stored as contiguous spectra. Recall of individual spectra is quick but panoramas, zooming and panning across whole datasets necessitates processing/memory overheads impractical for interactive use. Moreover, visualisation is challenging if significant quantification data is missing due to data-dependent acquisition of MS/MS spectra. In order to tackle these issues, we leverage our seaMass technique for novel signal decomposition. LC-MS data is modelled as a 2D surface through selection of a sparse set of weighted B-spline basis functions from an over-complete dictionary. By ordering and spatially partitioning the weights with an R-tree data model, efficient streaming visualisations are achieved. In this paper, we describe the core MS1 visualisation engine and overlay of MS/MS annotations. This enables the mass spectrometrist to quickly inspect whole runs for ionisation/chromatographic issues, MS/MS precursors for coverage problems, or putative biomarkers for interferences, for example. The open-source software is available from http://seamass.net/viz/. PMID:25663356

Event visualisation in ALICE - current status and strategy for Run 3

NASA Astrophysics Data System (ADS)

Niedziela, Jeremi; von Haller, Barthélémy

2017-10-01

A Large Ion Collider Experiment (ALICE) is one of the four big experiments running at the Large Hadron Collider (LHC), which focuses on the study of the Quark-Gluon Plasma (QGP) being produced in heavy-ion collisions. The ALICE Event Visualisation Environment (AliEve) is a tool providing an interactive 3D model of the detector’s geometry and a graphical representation of the data. Together with the online reconstruction module, it provides important quality monitoring of the recorded data. As a consequence it has been used in the ALICE Run Control Centre during all stages of Run 2. Static screenshots from the online visualisation are published on the public website - ALICE LIVE. Dedicated converters have been developed to provide geometry and data for external projects. An example of such project is the Total Event Display (TEV) - a visualisation tool recently developed by the CERN Media Lab based on the Unity game engine. It can be easily deployed on any platform, including web and mobile platforms. Another external project is More Than ALICE - an augmented reality application for visitors, overlaying detector descriptions and event visualisations on the camera’s picture. For the future Run 3 both AliEve and TEV will be adapted to fit the ALICE O2 project. Several changes are required due to the new data formats, especially so-called Compressed Time Frames.

Multi-purpose presentation techniques for geoscientific data in various media

NASA Astrophysics Data System (ADS)

Rink, Karsten; Bilke, Lars

2014-05-01

The intuitive presentation of the progression of complex geoscientific phenomena is often an underrated part of the modelling- and simulation workflow. Compiling such a presentation allows to easily communicate progress in joint research projects between participants with different backgrounds. Also, adequate 3D visualisations are usually easier to understand when presenting research results to stakeholders as well as the general public and critical information is conveyed in a more comprehensible manner. We established a workflow that is based on integration and preprocessing of multiple geoscientific data sets in a suitable framework such as the OpenGeoSys Data Explorer or ParaView. After choosing an adequate visual representation of the data in these frameworks, custom-made interfaces are employed to export the data to presentation frameworks. For instance, using the Unity 3D Engine allows to implement interaction techniques such as adding camera paths, concentrating on specific subsets of the data or scene, blending multiple data sets, etc. While a general sequence of the presentation can be predefined, interactive navigation is still possible and allows to focus on particular interests of the audience. Established interfaces and frameworks allow to display existing presentations in multiple ways, including virtual reality environments, novel hardware such as head-mounted displays like the Occulus Rift, or even websites presenting 3D content. Furthermore, the content can be redistributed as an executable for use on arbitrary machines. This versatility enables the use of prepared presentations for a multitude of occasions including exchange of intermediary result to partners in cooperate projects, reports at conferences, the defense of research projects, or use in training courses or for tutorials.

Modelling the sensory space of varietal wines: Mining of large, unstructured text data and visualisation of style patterns.

PubMed

Valente, Carlo C; Bauer, Florian F; Venter, Fritz; Watson, Bruce; Nieuwoudt, Hélène H

2018-03-21

The increasingly large volumes of publicly available sensory descriptions of wine raises the question whether this source of data can be mined to extract meaningful domain-specific information about the sensory properties of wine. We introduce a novel application of formal concept lattices, in combination with traditional statistical tests, to visualise the sensory attributes of a big data set of some 7,000 Chenin blanc and Sauvignon blanc wines. Complexity was identified as an important driver of style in hereto uncharacterised Chenin blanc, and the sensory cues for specific styles were identified. This is the first study to apply these methods for the purpose of identifying styles within varietal wines. More generally, our interactive data visualisation and mining driven approach opens up new investigations towards better understanding of the complex field of sensory science.

TIM, a ray-tracing program for METATOY research and its dissemination

NASA Astrophysics Data System (ADS)

Lambert, Dean; Hamilton, Alasdair C.; Constable, George; Snehanshu, Harsh; Talati, Sharvil; Courtial, Johannes

2012-03-01

TIM (The Interactive METATOY) is a ray-tracing program specifically tailored towards our research in METATOYs, which are optical components that appear to be able to create wave-optically forbidden light-ray fields. For this reason, TIM possesses features not found in other ray-tracing programs. TIM can either be used interactively or by modifying the openly available source code; in both cases, it can easily be run as an applet embedded in a web page. Here we describe the basic structure of TIM's source code and how to extend it, and we give examples of how we have used TIM in our own research. Program summaryProgram title: TIM Catalogue identifier: AEKY_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEKY_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License No. of lines in distributed program, including test data, etc.: 124 478 No. of bytes in distributed program, including test data, etc.: 4 120 052 Distribution format: tar.gz Programming language: Java Computer: Any computer capable of running the Java Virtual Machine (JVM) 1.6 Operating system: Any; developed under Mac OS X Version 10.6 RAM: Typically 145 MB (interactive version running under Mac OS X Version 10.6) Classification: 14, 18 External routines: JAMA [1] (source code included) Nature of problem: Visualisation of scenes that include scene objects that create wave-optically forbidden light-ray fields. Solution method: Ray tracing. Unusual features: Specifically designed to visualise wave-optically forbidden light-ray fields; can visualise ray trajectories; can visualise geometric optic transformations; can create anaglyphs (for viewing with coloured "3D glasses") and random-dot autostereograms of the scene; integrable into web pages. Running time: Problem-dependent; typically seconds for a simple scene.

The health impacts of globalisation: a conceptual framework

PubMed Central

Huynen, Maud MTE; Martens, Pim; Hilderink, Henk BM

2005-01-01

This paper describes a conceptual framework for the health implications of globalisation. The framework is developed by first identifying the main determinants of population health and the main features of the globalisation process. The resulting conceptual model explicitly visualises that globalisation affects the institutional, economic, social-cultural and ecological determinants of population health, and that the globalisation process mainly operates at the contextual level, while influencing health through its more distal and proximal determinants. The developed framework provides valuable insights in how to organise the complexity involved in studying the health effects resulting from globalisation. It could, therefore, give a meaningful contribution to further empirical research by serving as a 'think-model' and provides a basis for the development of future scenarios on health. PMID:16078989

Provenance for Runtime Workflow Steering and Validation in Computational Seismology

NASA Astrophysics Data System (ADS)

Spinuso, A.; Krischer, L.; Krause, A.; Filgueira, R.; Magnoni, F.; Muraleedharan, V.; David, M.

2014-12-01

Provenance systems may be offered by modern workflow engines to collect metadata about the data transformations at runtime. If combined with effective visualisation and monitoring interfaces, these provenance recordings can speed up the validation process of an experiment, suggesting interactive or automated interventions with immediate effects on the lifecycle of a workflow run. For instance, in the field of computational seismology, if we consider research applications performing long lasting cross correlation analysis and high resolution simulations, the immediate notification of logical errors and the rapid access to intermediate results, can produce reactions which foster a more efficient progress of the research. These applications are often executed in secured and sophisticated HPC and HTC infrastructures, highlighting the need for a comprehensive framework that facilitates the extraction of fine grained provenance and the development of provenance aware components, leveraging the scalability characteristics of the adopted workflow engines, whose enactment can be mapped to different technologies (MPI, Storm clusters, etc). This work looks at the adoption of W3C-PROV concepts and data model within a user driven processing and validation framework for seismic data, supporting also computational and data management steering. Validation needs to balance automation with user intervention, considering the scientist as part of the archiving process. Therefore, the provenance data is enriched with community-specific metadata vocabularies and control messages, making an experiment reproducible and its description consistent with the community understandings. Moreover, it can contain user defined terms and annotations. The current implementation of the system is supported by the EU-Funded VERCE (http://verce.eu). It provides, as well as the provenance generation mechanisms, a prototypal browser-based user interface and a web API built on top of a NoSQL storage technology, experimenting ways to ensure a rapid and flexible access to the lineage traces. It supports the users with the visualisation of graphical products and offers combined operations to access and download the data which may be selectively stored at runtime, into dedicated data archives.

Interactive Tools to Access the HELCATS Catalogues

NASA Astrophysics Data System (ADS)

Rouillard, Alexis; Plotnikov, Illya; Pinto, Rui; Génot, Vincent; Bouchemit, Myriam; Davies, Jackie

2017-04-01

The propagation tool is a web-based interface written in java that allows users to propagate Coronal Mass Ejections (CMEs), Corotating Interaction Regions (CIRs) and Solar Energetic Particles (SEPs) in the inner heliosphere. The tool displays unique datasets and catalogues through a 2-D visualisation of the trajectories of these heliospheric structures in relation to the orbital position of probes/planets and the pointing direction and extent of different imaging instruments. Summary plots of in-situ data or images of the solar corona and planetary aurorae stored at the CDPP, MEDOC and APIS databases, respectively, can be used to verify the presence of heliospheric structures at the estimated launch or impact times. A great novelty of the tool is the immediate visualisation of J-maps and the possibility to superpose on these maps the HELCATS CME and CIR catalogues.

Interactive Tools to Access the HELCATS Catalogues

NASA Astrophysics Data System (ADS)

Rouillard, A.; Génot, V.; Bouchemit, M.; Pinto, R.

2017-09-01

The propagation tool is a web-based interface written in java that allows users to propagate Coronal Mass Ejections (CMEs), Corotating Interaction Regions (CIRs) and Solar Energetic Particles (SEPs) in the inner heliosphere. The tool displays unique datasets and catalogues through a 2-D visualisation of the trajectories of these heliospheric structures in relation to the orbital position of probes/planets and the pointing direction and extent of different imaging instruments. Summary plots of in-situ data or images of the solar corona and planetary aurorae stored at the CDPP, MEDOC and APIS databases, respectively, can be used to verify the presence of heliospheric structures at the estimated launch or impact times. A great novelty of the tool is the immediate visualisation of J-maps and the possibility to superpose on these maps the HELCATS CME and CIR catalogues.

The interaction of fingermark deposits on metal surfaces and potential ways for visualisation.

PubMed

Wightman, G; Emery, F; Austin, C; Andersson, I; Harcus, L; Arju, G; Steven, C

2015-04-01

The interaction of fingermark deposits on metals has been examined by a variety of techniques. Visualisation by film growth has been the main area of investigation through: thermal oxidation, anodising, peroxide solution, and the interaction with vapour of iodine and ammonium sulphide. Corrosion of the underlying metal has also been examined as an alternative means of visualisation. Confocal microscopy was used to look at the film thickness and corrosion products around the prints. Scanning electron microscopy and energy dispersion of X-rays (SEM-EDX) examined a number of metal samples to investigate film growth and the elemental distribution. The observations suggest that differential oxidation was occurring as well as corrosion into the metal. Fingermark deposits on metals can corrode into the metal depending on the reactivity of the metal and leave a recoverable mark. However, fingermark deposits can also alter the rate of chemical reaction of the substrate metal by oxidation. In some cases organic matter can inhibit reaction, both when forming an oxide layer and when corroding the metal. However, signs of third level detail from pore contact may also be visible and the monovalent ions from salts could also influence film growth. Whilst further work would need to be carried out to decide whether any of these techniques may have application in fingermark recovery, this study does suggest that fingermarks on metals may be recoverable after incidents such as fires or immersion in water. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Intelligent viewpoint selection for efficient CT to video registration in laparoscopic liver surgery.

PubMed

Robu, Maria R; Edwards, Philip; Ramalhinho, João; Thompson, Stephen; Davidson, Brian; Hawkes, David; Stoyanov, Danail; Clarkson, Matthew J

2017-07-01

Minimally invasive surgery offers advantages over open surgery due to a shorter recovery time, less pain and trauma for the patient. However, inherent challenges such as lack of tactile feedback and difficulty in controlling bleeding lower the percentage of suitable cases. Augmented reality can show a better visualisation of sub-surface structures and tumour locations by fusing pre-operative CT data with real-time laparoscopic video. Such augmented reality visualisation requires a fast and robust video to CT registration that minimises interruption to the surgical procedure. We propose to use view planning for efficient rigid registration. Given the trocar position, a set of camera positions are sampled and scored based on the corresponding liver surface properties. We implement a simulation framework to validate the proof of concept using a segmented CT model from a human patient. Furthermore, we apply the proposed method on clinical data acquired during a human liver resection. The first experiment motivates the viewpoint scoring strategy and investigates reliable liver regions for accurate registrations in an intuitive visualisation. The second experiment shows wider basins of convergence for higher scoring viewpoints. The third experiment shows that a comparable registration performance can be achieved by at least two merged high scoring views and four low scoring views. Hence, the focus could change from the acquisition of a large liver surface to a small number of distinctive patches, thereby giving a more explicit protocol for surface reconstruction. We discuss the application of the proposed method on clinical data and show initial results. The proposed simulation framework shows promising results to motivate more research into a comprehensive view planning method for efficient registration in laparoscopic liver surgery.

A "Research" into International Student-Related Research: (Re)visualising Our Stand?

ERIC Educational Resources Information Center

Abdullah, Doria; Abd Aziz, Mohd Ismail; Mohd Ibrahim, Abdul Latiff

2014-01-01

This paper uses Tight ("High Educ Res Dev" 23(4):395-411, 2004; "High Educ Res Dev" 31(5):723-740, 2012; "High Educ Res Dev" 32(1):136-151, 2013)'s journal analysis and review framework to review a sample of 497 journal articles on researches concerning international students over the past 30 years. It was found…

Investigation of Interactive Online Visual Tools for the Learning of Mathematics

ERIC Educational Resources Information Center

Jacobs, K. L.

2005-01-01

For many years, educators have been discussing benefits of educational practices such as the use of real-world examples, visualisation, interactivity, constructivism, self-paced learning and self-paced testing. Macromedia Flash MX has been used to develop online modules for the course Differential Equations offered at the University of South…

Visualising the Invisible: A Network Approach to Reveal the Informal Social Side of Student Learning

ERIC Educational Resources Information Center

Hommes, J.; Rienties, B.; de Grave, W.; Bos, G.; Schuwirth, L.; Scherpbier, A.

2012-01-01

World-wide, universities in health sciences have transformed their curriculum to include collaborative learning and facilitate the students' learning process. Interaction has been acknowledged to be the synergistic element in this learning context. However, students spend the majority of their time outside their classroom and interaction does not…

D Tracking Based Augmented Reality for Cultural Heritage Data Management

NASA Astrophysics Data System (ADS)

Battini, C.; Landi, G.

2015-02-01

The development of contactless documentation techniques is allowing researchers to collect high volumes of three-dimensional data in a short time but with high levels of accuracy. The digitalisation of cultural heritage opens up the possibility of using image processing and analysis, and computer graphics techniques, to preserve this heritage for future generations; augmenting it with additional information or with new possibilities for its enjoyment and use. The collection of precise datasets about cultural heritage status is crucial for its interpretation, its conservation and during the restoration processes. The application of digital-imaging solutions for various feature extraction, image data-analysis techniques, and three-dimensional reconstruction of ancient artworks, allows the creation of multidimensional models that can incorporate information coming from heterogeneous data sets, research results and historical sources. Real objects can be scanned and reconstructed virtually, with high levels of data accuracy and resolution. Real-time visualisation software and hardware is rapidly evolving and complex three-dimensional models can be interactively visualised and explored on applications developed for mobile devices. This paper will show how a 3D reconstruction of an object, with multiple layers of information, can be stored and visualised through a mobile application that will allow interaction with a physical object for its study and analysis, using 3D Tracking based Augmented Reality techniques.

Imaging of bacterial multicellular behaviour in biofilms in liquid by atmospheric scanning electron microscopy

PubMed Central

Sugimoto, Shinya; Okuda, Ken-ichi; Miyakawa, Reina; Sato, Mari; Arita-Morioka, Ken-ichi; Chiba, Akio; Yamanaka, Kunitoshi; Ogura, Teru; Mizunoe, Yoshimitsu; Sato, Chikara

2016-01-01

Biofilms are complex communities of microbes that attach to biotic or abiotic surfaces causing chronic infectious diseases. Within a biofilm, microbes are embedded in a self-produced soft extracellular matrix (ECM), which protects them from the host immune system and antibiotics. The nanoscale visualisation of delicate biofilms in liquid is challenging. Here, we develop atmospheric scanning electron microscopy (ASEM) to visualise Gram-positive and -negative bacterial biofilms immersed in aqueous solution. Biofilms cultured on electron-transparent film were directly imaged from below using the inverted SEM, allowing the formation of the region near the substrate to be studied at high resolution. We visualised intercellular nanostructures and the exocytosis of membrane vesicles, and linked the latter to the trafficking of cargos, including cytoplasmic proteins and the toxins hemolysin and coagulase. A thick dendritic nanotube network was observed between microbes, suggesting multicellular communication in biofilms. A universal immuno-labelling system was developed for biofilms and tested on various examples, including S. aureus biofilms. In the ECM, fine DNA and protein networks were visualised and the precise distribution of protein complexes was determined (e.g., straight curli, flagella, and excreted cytoplasmic molecular chaperones). Our observations provide structural insights into bacteria-substratum interactions, biofilm development and the internal microbe community. PMID:27180609

Using geovisual analytics in Google Earth to understand disease distribution: a case study of campylobacteriosis in the Czech Republic (2008-2012).

PubMed

Marek, Lukáš; Tuček, Pavel; Pászto, Vít

2015-01-28

Visual analytics aims to connect the processing power of information technologies and the user's ability of logical thinking and reasoning through the complex visual interaction. Moreover, the most of the data contain the spatial component. Therefore, the need for geovisual tools and methods arises. Either one can develop own system but the dissemination of findings and its usability might be problematic or the widespread and well-known platform can be utilized. The aim of this paper is to prove the applicability of Google Earth™ software as a tool for geovisual analytics that helps to understand the spatio-temporal patterns of the disease distribution. We combined the complex joint spatio-temporal analysis with comprehensive visualisation. We analysed the spatio-temporal distribution of the campylobacteriosis in the Czech Republic between 2008 and 2012. We applied three main approaches in the study: (1) the geovisual analytics of the surveillance data that were visualised in the form of bubble chart; (2) the geovisual analytics of the disease's weekly incidence surfaces computed by spatio-temporal kriging and (3) the spatio-temporal scan statistics that was employed in order to identify high or low rates clusters of affected municipalities. The final data are stored in Keyhole Markup Language files and visualised in Google Earth™ in order to apply geovisual analytics. Using geovisual analytics we were able to display and retrieve information from complex dataset efficiently. Instead of searching for patterns in a series of static maps or using numerical statistics, we created the set of interactive visualisations in order to explore and communicate results of analyses to the wider audience. The results of the geovisual analytics identified periodical patterns in the behaviour of the disease as well as fourteen spatio-temporal clusters of increased relative risk. We prove that Google Earth™ software is a usable tool for the geovisual analysis of the disease distribution. Google Earth™ has many indisputable advantages (widespread, freely available, intuitive interface, space-time visualisation capabilities and animations, communication of results), nevertheless it is still needed to combine it with pre-processing tools that prepare the data into a form suitable for the geovisual analytics itself.

Data Interpretation in the Digital Age

PubMed Central

Leonelli, Sabina

2014-01-01

The consultation of internet databases and the related use of computer software to retrieve, visualise and model data have become key components of many areas of scientific research. This paper focuses on the relation of these developments to understanding the biology of organisms, and examines the conditions under which the evidential value of data posted online is assessed and interpreted by the researchers who access them, in ways that underpin and guide the use of those data to foster discovery. I consider the types of knowledge required to interpret data as evidence for claims about organisms, and in particular the relevance of knowledge acquired through physical interaction with actual organisms to assessing the evidential value of data found online. I conclude that familiarity with research in vivo is crucial to assessing the quality and significance of data visualised in silico; and that studying how biological data are disseminated, visualised, assessed and interpreted in the digital age provides a strong rationale for viewing scientific understanding as a social and distributed, rather than individual and localised, achievement. PMID:25729262

Marketing health education: advertising margarine and visualising health in Britain from 1964-c.2000.

PubMed

Hand, Jane

2017-01-01

During the post-war period, margarine was re-conceptualised as a value-added product with distinct health benefits. This article contextualises the advertising of margarine as a healthy food, focusing on Unilever's Flora brand as an important case study in legitimising the emergent role of disease prevention as a marketing tool. It uses the methodology of visual culture to examine how advertising employed chronic disease prevention as a selling tool. This article assesses how the post-war environment gave rise to new ways of visually advertising food, and how these promoted innovative visualisations of food, the body and their interactions with health.

Visualising Conversation Structure across Time: Insights into Effective Doctor-Patient Consultations

PubMed Central

Angus, Daniel; Watson, Bernadette; Smith, Andrew; Gallois, Cindy; Wiles, Janet

2012-01-01

Effective communication between healthcare professionals and patients is critical to patients’ health outcomes. The doctor/patient dialogue has been extensively researched from different perspectives, with findings emphasising a range of behaviours that lead to effective communication. Much research involves self-reports, however, so that behavioural engagement cannot be disentangled from patients’ ratings of effectiveness. In this study we used a highly efficient and time economic automated computer visualisation measurement technique called Discursis to analyse conversational behaviour in consultations. Discursis automatically builds an internal language model from a transcript, mines the transcript for its conceptual content, and generates an interactive visual account of the discourse. The resultant visual account of the whole consultation can be analysed for patterns of engagement between interactants. The findings from this study show that Discursis is effective at highlighting a range of consultation techniques, including communication accommodation, engagement and repetition. PMID:22693629

The VERCE Science Gateway: Enabling User Friendly HPC Seismic Wave Simulations.

NASA Astrophysics Data System (ADS)

Casarotti, E.; Spinuso, A.; Matser, J.; Leong, S. H.; Magnoni, F.; Krause, A.; Garcia, C. R.; Muraleedharan, V.; Krischer, L.; Anthes, C.

2014-12-01

The EU-funded project VERCE (Virtual Earthquake and seismology Research Community in Europe) aims to deploy technologies which satisfy the HPC and data-intensive requirements of modern seismology.As a result of VERCE official collaboration with the EU project SCI-BUS, access to computational resources, like local clusters and international infrastructures (EGI and PRACE), is made homogeneous and integrated within a dedicated science gateway based on the gUSE framework. In this presentation we give a detailed overview on the progress achieved with the developments of the VERCE Science Gateway, according to a use-case driven implementation strategy. More specifically, we show how the computational technologies and data services have been integrated within a tool for Seismic Forward Modelling, whose objective is to offer the possibility to performsimulations of seismic waves as a service to the seismological community.We will introduce the interactive components of the OGC map based web interface and how it supports the user with setting up the simulation. We will go through the selection of input data, which are either fetched from federated seismological web services, adopting community standards, or provided by the users themselves by accessing their own document data store. The HPC scientific codes can be selected from a number of waveform simulators, currently available to the seismological community as batch tools or with limited configuration capabilities in their interactive online versions.The results will be staged out via a secure GridFTP transfer to a VERCE data layer managed by iRODS. The provenance information of the simulation will be automatically cataloged by the data layer via NoSQL techonologies.Finally, we will show the example of how the visualisation output of the gateway could be enhanced by the connection with immersive projection technology at the Virtual Reality and Visualisation Centre of Leibniz Supercomputing Centre (LRZ).

Problems In Indoor Mapping and Modelling

NASA Astrophysics Data System (ADS)

Zlatanova, S.; Sithole, G.; Nakagawa, M.; Zhu, Q.

2013-11-01

Research in support of indoor mapping and modelling (IMM) has been active for over thirty years. This research has come in the form of As-Built surveys, Data structuring, Visualisation techniques, Navigation models and so forth. Much of this research is founded on advancements in photogrammetry, computer vision and image analysis, computer graphics, robotics, laser scanning and many others. While IMM used to be the privy of engineers, planners, consultants, contractors, and designers, this is no longer the case as commercial enterprises and individuals are also beginning to apply indoor models in their business process and applications. There are three main reasons for this. Firstly, the last two decades have seen greater use of spatial information by enterprises and the public. Secondly, IMM has been complimented by advancements in mobile computing and internet communications, making it easier than ever to access and interact with spatial information. Thirdly, indoor modelling has been advanced geometrically and semantically, opening doors for developing user-oriented, context-aware applications. This reshaping of the public's attitude and expectations with regards to spatial information has realised new applications and spurred demand for indoor models and the tools to use them. This paper examines the present state of IMM and considers the research areas that deserve attention in the future. In particular the paper considers problems in IMM that are relevant to commercial enterprises and the general public, groups this paper expects will emerge as the greatest users IMM. The subject of indoor modelling and mapping is discussed here in terms of Acquisitions and Sensors, Data Structures and Modelling, Visualisation, Applications, Legal Issues and Standards. Problems are discussed in terms of those that exist and those that are emerging. Existing problems are those that are currently being researched. Emerging problems are those problems or demands that are expected to arise because of social changes, technological advancements, or commercial interests. The motivation of this work is to define a set of research problems that are either being investigated or should be investigated. These will hopefully provide a framework for assessing progress and advances in indoor modelling. The framework will be developed in the form of a problem matrix, detailing existing and emerging problems, their solutions and present best practices. Once the framework is complete it will be published online so that the IMM community can discuss and modify it as necessary. When the framework has reached a steady state an empirical benchmark will be provided to test solutions to posed problems. A yearly evaluation of the problem matrix will follow, the results of which will be published.

Light, shadows and surface characteristics: the multispectral Portable Light Dome

NASA Astrophysics Data System (ADS)

Watteeuw, Lieve; Hameeuw, Hendrik; Vandermeulen, Bruno; Van der Perre, Athena; Boschloos, Vanessa; Delvaux, Luc; Proesmans, Marc; Van Bos, Marina; Van Gool, Luc

2016-11-01

A multispectral, multidirectional, portable and dome-shaped acquisition system is developed within the framework of the research projects RICH (KU Leuven) and EES (RMAH, Brussels) in collaboration with the ESAT-VISICS research group (KU Leuven). The multispectral Portable Light Dome (MS PLD) consists of a hemispherical structure, an overhead camera and LEDs emitting in five parts of the electromagnetic spectrum regularly covering the dome's inside surface. With the associated software solution, virtual relighting and enhancements can be applied in a real-time, interactive manner. The system extracts genuine 3D and shading information based on a photometric stereo algorithm. This innovative approach allows for instantaneous alternations between the computations in the infrared, red, green, blue and ultraviolet spectra. The MS PLD system has been tested for research ranging from medieval manuscript illuminations to ancient Egyptian artefacts. Preliminary results have shown that it documents and measures the 3D surface structure of objects, re-visualises underdrawings, faded pigments and inscriptions, and examines the MS results in combination with the actual relief characteristics of the physical object. Newly developed features are reflection maps and histograms, analytic visualisations of the reflection properties of all separate LEDs or selected areas. In its capacity as imaging technology, the system acts as a tool for the analysis of surface materials (e.g. identification of blue pigments, gold and metallic surfaces). Besides offering support in answering questions of attribution and monitoring changes and decay of materials, the PLD also contributes to the identification of materials, all essential factors when making decisions in the conservation protocol.

Visualisation and communication of probabilistic climate forecasts to renewable-energy policy makers

NASA Astrophysics Data System (ADS)

Steffen, Sophie; Lowe, Rachel; Davis, Melanie; Doblas-Reyes, Francisco J.; Rodó, Xavier

2014-05-01

Despite the strong dependence on weather and climate variability of the renewable-energy industry, and the existence of several initiatives towards demonstrating the added benefits of integrating probabilistic forecasts into energy decision-making processes, weather and climate forecasts are still under-utilised within the sector. Improved communication is fundamental to stimulate the use of climate forecast information within decision-making processes, in order to adapt to a highly climate dependent renewable-energy industry. This work focuses on improving the visualisation of climate forecast information, paying special attention to seasonal time scales. This activity is central to enhance climate services for renewable energy and to optimise the usefulness and usability of inherently complex climate information. In the realm of the Global Framework for Climate Services (GFCS) initiative, and subsequent European projects: Seasonal-to-Decadal Climate Prediction for the Improvement of European Climate Service (SPECS) and the European Provision of Regional Impacts Assessment in Seasonal and Decadal Timescales (EUPORIAS), this paper investigates the visualisation and communication of seasonal forecasts with regards to their usefulness and usability, to enable the development of a European climate service. The target end user is the group of renewable-energy policy makers, who are central to enhance climate services for the energy industry. The overall objective is to promote the wide-range dissemination and exchange of actionable climate information based on seasonal forecasts from Global Producing Centres (GPCs). It examines the existing main barriers and deficits. Examples of probabilistic climate forecasts from different GPC's are used to make a catalogue of current approaches, to assess their advantages and limitations and, finally, to recommend better alternatives. Interviews have been conducted with renewable-energy stakeholders to receive feedback for the improvement of existing visualisation techniques of forecasts. The overall aim is to establish a communication protocol for the visualisation of probabilistic climate forecasts, which does not currently exist. GPCs show their own probabilistic forecasts with limited consistency in their communication across different centres, which complicates the understanding for the end user. The recommended communication protocol for both the visualisation and description of climate forecasts can help to introduce a standard format and message to end users from several climate-sensitive sectors, such as energy, tourism, agriculture and health.

Laser vibrometry for guided wave propagation phenomena visualisation and damage detection

NASA Astrophysics Data System (ADS)

Malinowski, Pawel; Wandowski, Tomasz; Kudela, Pawel; Ostachowicz, Wieslaw

2010-05-01

This paper presents research on the damage localization method. The method is based on guided wave propagation phenomena. The investigation was focused on application of this method to monitor the condition of structural elements such as aluminium or composite panels. These elements are commonly used in aerospace industry and it is crucial to provide a methodology to determine their condition, in order to prevent from unexpected and dangerous collapse of a structure. Propagating waves interact with cracks, notches, rivets, thickness changes, stiffeners and other discontinuities present in structural elements. It means that registering these waves one can obtain information about the structure condition—whether it is damaged or not. Furthermore these methods can be applied not only to aerospace structures but also to wind turbine blades and pipelines. In reported investigation piezoelectric transducer was used to excite guided waves in considered panel. Measurement of the wave field was realized using laser scanning vibrometer that registered the velocity responses at a defined points belonging to a defined mesh. Mesh spacing was investigated in order to ensure fine wave propagation visualisation. Firstly, wave propagation in pristine specimen was investigated. Secondly, artificial damage was introduced to the specimen. Finally, wave interaction with damage was visualised and conclusions regarding potentials of application of laser vibrometer for damage detection were drawn. All the processing was made with the developed MATLAB procedures.

LIME: 3D visualisation and interpretation of virtual geoscience models

NASA Astrophysics Data System (ADS)

Buckley, Simon; Ringdal, Kari; Dolva, Benjamin; Naumann, Nicole; Kurz, Tobias

2017-04-01

Three-dimensional and photorealistic acquisition of surface topography, using methods such as laser scanning and photogrammetry, has become widespread across the geosciences over the last decade. With recent innovations in photogrammetric processing software, robust and automated data capture hardware, and novel sensor platforms, including unmanned aerial vehicles, obtaining 3D representations of exposed topography has never been easier. In addition to 3D datasets, fusion of surface geometry with imaging sensors, such as multi/hyperspectral, thermal and ground-based InSAR, and geophysical methods, create novel and highly visual datasets that provide a fundamental spatial framework to address open geoscience research questions. Although data capture and processing routines are becoming well-established and widely reported in the scientific literature, challenges remain related to the analysis, co-visualisation and presentation of 3D photorealistic models, especially for new users (e.g. students and scientists new to geomatics methods). Interpretation and measurement is essential for quantitative analysis of 3D datasets, and qualitative methods are valuable for presentation purposes, for planning and in education. Motivated by this background, the current contribution presents LIME, a lightweight and high performance 3D software for interpreting and co-visualising 3D models and related image data in geoscience applications. The software focuses on novel data integration and visualisation of 3D topography with image sources such as hyperspectral imagery, logs and interpretation panels, geophysical datasets and georeferenced maps and images. High quality visual output can be generated for dissemination purposes, to aid researchers with communication of their research results. The background of the software is described and case studies from outcrop geology, in hyperspectral mineral mapping and geophysical-geospatial data integration are used to showcase the novel methods developed.

Interactive neonatal gastrointestinal magnetic resonance imaging using fruit juice as an oral contrast media.

PubMed

Arthurs, Owen J; Graves, Martin J; Edwards, Andrea D; Joubert, Ilse; Set, Pat A K; Lomas, David J

2014-09-22

The objective was to evaluate the use of fruit juice with an interactive inversion recovery (IR) MR pulse sequence to visualise the gastrointestinal tract. We investigated the relaxation properties of 12 different natural fruit juices in vitro, to identify which could be used as oral contrast. We then describe our initial experience using an interactive MR pulse sequence to allow optimal visualisation after administering pineapple juice orally, and suppressing pre-existing bowel fluid contents, with variable TI in three adult and one child volunteer. Pineapple juice (PJ) had both the shortest T1 (243 ms) and shortest T2 (48 ms) of the fruit juices tested. Optimal signal differentiation between pre-existing bowel contents and oral PJ administration was obtained with TIs of between 900 and 1100 ms. The use of an inversion recovery preparation allowed long T1 pre-existing bowel contents to be suppressed whilst the short T1 of fruit juice acts as a positive contrast medium. Pineapple juice could be used as oral contrast agent for neonatal gastrointestinal magnetic resonance imaging.

Marketing health education: advertising margarine and visualising health in Britain from 1964–c.2000

PubMed Central

Hand, Jane

2017-01-01

Abstract During the post-war period, margarine was re-conceptualised as a value-added product with distinct health benefits. This article contextualises the advertising of margarine as a healthy food, focusing on Unilever’s Flora brand as an important case study in legitimising the emergent role of disease prevention as a marketing tool. It uses the methodology of visual culture to examine how advertising employed chronic disease prevention as a selling tool. This article assesses how the post-war environment gave rise to new ways of visually advertising food, and how these promoted innovative visualisations of food, the body and their interactions with health. PMID:29348778

Towards a next generation of climate services scientists : The EUPORIAS Masterclass experience

NASA Astrophysics Data System (ADS)

Dell'Aquila, Alessandro; Buontempo, Carlo; Liggins, Felicity; Soares, Marta Bruno; De Felice, Matteo

2017-04-01

Climate service development require a new framework for the interaction between users and provider of climate information subverting the standard top down approach from academia to application. In the framework of EUPORIAS project two summer schools have been organized with the ambition to be a first step in the direction of co-production where new prototypes could be developed but, more importantly , where new protocol for interactions could be explain and presented in a hands-on fashion In this perspective, in May 2015 and May 2016 two climate service masterclass of EUPORIAS took place at EURAC's headquarters in Bolzano, Italy. The schools , aimed at professional and early career climate scientists, hosted students from 15 different countries. This first masterclass of the project focused on three key sectors: agriculture, tourism and energy, while the second one focused on health, water and food security. Alongside lectures delivered by speakers on disciplines as diverse as climate modelling, data visualisation and psychology from across Europe, Africa and Australia, the students were tasked with creating prototype climate services, in answer to real-life end-user requirements. The teams worked on case-studies from real end-users who were also at the school. It was tough going for some of the groups but we feel there is nothing more instructive than real end-user interactions to fully understand the complexity of climate service development. The quality of the students and by the insightful questions they asked has been really impressive. Whilst some mirrored discussions already active within the climate service community others were novel and revealed an interesting junior perspective to the field. Such a hands-on a formula worked well and suggests some possible new methodologies potentially transportable to other similar events.

Collaborative visual analytics of radio surveys in the Big Data era

NASA Astrophysics Data System (ADS)

Vohl, Dany; Fluke, Christopher J.; Hassan, Amr H.; Barnes, David G.; Kilborn, Virginia A.

2017-06-01

Radio survey datasets comprise an increasing number of individual observations stored as sets of multidimensional data. In large survey projects, astronomers commonly face limitations regarding: 1) interactive visual analytics of sufficiently large subsets of data; 2) synchronous and asynchronous collaboration; and 3) documentation of the discovery workflow. To support collaborative data inquiry, we present encube, a large-scale comparative visual analytics framework. encube can utilise advanced visualization environments such as the CAVE2 (a hybrid 2D and 3D virtual reality environment powered with a 100 Tflop/s GPU-based supercomputer and 84 million pixels) for collaborative analysis of large subsets of data from radio surveys. It can also run on standard desktops, providing a capable visual analytics experience across the display ecology. encube is composed of four primary units enabling compute-intensive processing, advanced visualisation, dynamic interaction, parallel data query, along with data management. Its modularity will make it simple to incorporate astronomical analysis packages and Virtual Observatory capabilities developed within our community. We discuss how encube builds a bridge between high-end display systems (such as CAVE2) and the classical desktop, preserving all traces of the work completed on either platform - allowing the research process to continue wherever you are.

3D Visualisation and Artistic Imagery to Enhance Interest in "Hidden Environments"--New Approaches to Soil Science

ERIC Educational Resources Information Center

Gilford, J.; Falconer, R. E.; Wade, R.; Scott-Brown, K. C.

2014-01-01

Interactive Virtual Environments (VEs) have the potential to increase student interest in soil science. Accordingly a bespoke "soil atlas" was created using Java3D as an interactive 3D VE, to show soil information in the context of (and as affected by) the over-lying landscape. To display the below-ground soil characteristics, four sets…

Efficiency and effectiveness in case of disaster: a visual damage assessment test

NASA Astrophysics Data System (ADS)

Ooms, Kristien; Åhlén, Julia; Seipel, Stefan

2018-05-01

A user study is conducted to evaluate the efficiency and effectiveness of two types of visualizations to identify damages sites in case of disaster. The test consists out 36 trials (18 for each visualisation) and in each trial an area of 1 × 1 km, located in Ghent, is displayed on a screen. This image shows the combined height information from before and after the disaster. The first visualisation, page flipping, is based on greyscale images with height information from the pre- and post-disaster situation between which users can switch manually. The second visualisation, difference image, is a result of subtracting the heights (before versus after) and assigning a blue-white-red colour ramp. In order to simulate the urgency with which the data is captured, systematic and random imperfections are introduced in the post-disaster data. All participants' mouse and key interactions are logged, which is further complemented by the registration of their eye movements. This give insights the visualizations' efficiency, effectiveness and the overall search strategies of the participants.

bioWeb3D: an online webGL 3D data visualisation tool.

PubMed

Pettit, Jean-Baptiste; Marioni, John C

2013-06-07

Data visualization is critical for interpreting biological data. However, in practice it can prove to be a bottleneck for non trained researchers; this is especially true for three dimensional (3D) data representation. Whilst existing software can provide all necessary functionalities to represent and manipulate biological 3D datasets, very few are easily accessible (browser based), cross platform and accessible to non-expert users. An online HTML5/WebGL based 3D visualisation tool has been developed to allow biologists to quickly and easily view interactive and customizable three dimensional representations of their data along with multiple layers of information. Using the WebGL library Three.js written in Javascript, bioWeb3D allows the simultaneous visualisation of multiple large datasets inputted via a simple JSON, XML or CSV file, which can be read and analysed locally thanks to HTML5 capabilities. Using basic 3D representation techniques in a technologically innovative context, we provide a program that is not intended to compete with professional 3D representation software, but that instead enables a quick and intuitive representation of reasonably large 3D datasets.

Interactive Molecular Graphics for Augmented Reality Using HoloLens.

PubMed

Müller, Christoph; Krone, Michael; Huber, Markus; Biener, Verena; Herr, Dominik; Koch, Steffen; Reina, Guido; Weiskopf, Daniel; Ertl, Thomas

2018-06-13

Immersive technologies like stereo rendering, virtual reality, or augmented reality (AR) are often used in the field of molecular visualisation. Modern, comparably lightweight and affordable AR headsets like Microsoft's HoloLens open up new possibilities for immersive analytics in molecular visualisation. A crucial factor for a comprehensive analysis of molecular data in AR is the rendering speed. HoloLens, however, has limited hardware capabilities due to requirements like battery life, fanless cooling and weight. Consequently, insights from best practises for powerful desktop hardware may not be transferable. Therefore, we evaluate the capabilities of the HoloLens hardware for modern, GPU-enabled, high-quality rendering methods for the space-filling model commonly used in molecular visualisation. We also assess the scalability for large molecular data sets. Based on the results, we discuss ideas and possibilities for immersive molecular analytics. Besides more obvious benefits like the stereoscopic rendering offered by the device, this specifically includes natural user interfaces that use physical navigation instead of the traditional virtual one. Furthermore, we consider different scenarios for such an immersive system, ranging from educational use to collaborative scenarios.

Visualising higher order Brillouin zones with applications

NASA Astrophysics Data System (ADS)

Andrew, R. C.; Salagaram, T.; Chetty, N.

2017-05-01

A key concept in material science is the relationship between the Bravais lattice, the reciprocal lattice and the resulting Brillouin zones (BZ). These zones are often complicated shapes that are hard to construct and visualise without the use of sophisticated software, even by professional scientists. We have used a simple sorting algorithm to construct BZ of any order for a chosen Bravais lattice that is easy to implement in any scientific programming language. The resulting zones can then be visualised using freely available plotting software. This method has pedagogical value for upper-level undergraduate students since, along with other computational methods, it can be used to illustrate how constant-energy surfaces combine with these zones to create van Hove singularities in the density of states. In this paper we apply our algorithm along with the empirical pseudopotential method and the 2D equivalent of the tetrahedron method to show how they can be used in a simple software project to investigate this interaction for a 2D crystal. This project not only enhances students’ fundamental understanding of the principles involved but also improves transferable coding skills.

3D visualisation and artistic imagery to enhance interest in `hidden environments' - new approaches to soil science

NASA Astrophysics Data System (ADS)

Gilford, J.; Falconer, R. E.; Wade, R.; Scott-Brown, K. C.

2014-09-01

Interactive Virtual Environments (VEs) have the potential to increase student interest in soil science. Accordingly a bespoke 'soil atlas' was created using Java3D as an interactive 3D VE, to show soil information in the context of (and as affected by) the over-lying landscape. To display the below-ground soil characteristics, four sets of artistic illustrations were produced, each set showing the effects of soil organic-matter density and water content on fungal density, to determine potential for visualisations and interactivity in stimulating interest in soil and soil illustrations, interest being an important factor in facilitating learning. The illustrations were created using 3D modelling packages, and a wide range of styles were produced. This allowed a preliminary study of the relative merits of different artistic styles, scientific-credibility, scale, abstraction and 'realism' (e.g. photo-realism or realism of forms), and any relationship between these and the level of interest indicated by the study participants in the soil visualisations and VE. The study found significant differences in mean interest ratings for different soil illustration styles, as well as in the perception of scientific-credibility of these styles, albeit for both measures there was considerable difference of attitude between participants about particular styles. There was also found to be a highly significant positive correlation between participants rating styles highly for interest and highly for scientific-credibility. There was furthermore a particularly high interest rating among participants for seeing temporal soil processes illustrated/animated, suggesting this as a particularly promising method for further stimulating interest in soil illustrations and soil itself.

Visualising associations between paired ‘omics’ data sets

PubMed Central

2012-01-01

Background Each omics platform is now able to generate a large amount of data. Genomics, proteomics, metabolomics, interactomics are compiled at an ever increasing pace and now form a core part of the fundamental systems biology framework. Recently, several integrative approaches have been proposed to extract meaningful information. However, these approaches lack of visualisation outputs to fully unravel the complex associations between different biological entities. Results The multivariate statistical approaches ‘regularized Canonical Correlation Analysis’ and ‘sparse Partial Least Squares regression’ were recently developed to integrate two types of highly dimensional ‘omics’ data and to select relevant information. Using the results of these methods, we propose to revisit few graphical outputs to better understand the relationships between two ‘omics’ data and to better visualise the correlation structure between the different biological entities. These graphical outputs include Correlation Circle plots, Relevance Networks and Clustered Image Maps. We demonstrate the usefulness of such graphical outputs on several biological data sets and further assess their biological relevance using gene ontology analysis. Conclusions Such graphical outputs are undoubtedly useful to aid the interpretation of these promising integrative analysis tools and will certainly help in addressing fundamental biological questions and understanding systems as a whole. Availability The graphical tools described in this paper are implemented in the freely available R package mixOmics and in its associated web application. PMID:23148523

Interactive map communication: pilot study of the visual perceptions and preferences of public health practitioners.

PubMed

Koenig, A; Samarasundera, E; Cheng, T

2011-08-01

To conduct a pilot study into the comprehension and visualisation preferences of geographic information by public health practitioners (PHPs), particularly in the context of interactive, Internet-based atlases. Structured human-computer interaction interviews. Seven academia-based PHPs were interviewed as information service users based on a structured questionnaire to assess their understanding of geographic representations of morbidity data, and identify their visualisation preferences in a geographic information systems environment. Awareness of area-based deprivation indices and the Index of Multiple Deprivation 2007 health and disability domain was near-universal. However, novice users of disease maps had difficulties in interpreting data classifications, in understanding supplementary information in the form of box plots and histograms, and in making use of links between interactive tabular and cartographic information. Choices for colour plans when viewing maps showed little agreement between users, although pre-viewing comments showed preferences for red-blue diverging schema. PHPs new to geographic information would benefit from enhanced interpretive support documentation to meet their needs when using Internet-based, interactive public health atlases, which are rarely provided at such sites. Technical, software-related support alone is insufficient. Increased interaction between PHPs and mapmakers would be beneficial to maximise the potential of the current growth in interactive, electronic atlases, and improve geographic information support for public health decision-making and informing the wider public. Copyright © 2011 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

The visualisation and communication of probabilistic climate forecasts to renewable energy policy makers

NASA Astrophysics Data System (ADS)

Doblas-Reyes, F.; Steffen, S.; Lowe, R.; Davis, M.; Rodó, X.

2013-12-01

Despite the strong dependence of weather and climate variability on the renewable energy industry, and several initiatives towards demonstrating the added benefits of integrating probabilistic forecasts into energy decision making process, they are still under-utilised within the sector. Improved communication is fundamental to stimulate the use of climate forecast information within decision-making processes, in order to adapt to a highly climate dependent renewable energy industry. This paper focuses on improving the visualisation of climate forecast information, paying special attention to seasonal to decadal (s2d) timescales. This is central to enhance climate services for renewable energy, and optimise the usefulness and usability of inherently complex climate information. In the realm of the Global Framework for Climate Services (GFCS) initiative, and subsequent European projects: Seasonal-to-Decadal Climate Prediction for the Improvement of European Climate Service (SPECS) and the European Provision of Regional Impacts Assessment in Seasonal and Decadal Timescales (EUPORIAS), this paper investigates the visualisation and communication of s2d forecasts with regards to their usefulness and usability, to enable the development of a European climate service. The target end user will be renewable energy policy makers, who are central to enhance climate services for the energy industry. The overall objective is to promote the wide-range dissemination and exchange of actionable climate information based on s2d forecasts from Global Producing Centres (GPC's). Therefore, it is crucial to examine the existing main barriers and deficits. Examples of probabilistic climate forecasts from different GPC's were used to prepare a catalogue of current approaches, to assess their advantages and limitations and finally to recommend better alternatives. In parallel, interviews were conducted with renewable energy stakeholders to receive feedback for the improvement of existing visualisation techniques of forecasts. The overall aim is to establish a communication protocol for the visualisation of probabilistic climate forecasts, which does not currently exist. Global Producing Centres show their own probabilistic forecasts with limited consistency in their communication across different centres, which complicates the understanding for the end user. A communication protocol for both the visualisation and description of climate forecasts can help to introduce a standard format and message to end users from several climate-sensitive sectors, such as energy, tourism, agriculture and health. It is hoped that this work will facilitate the improvement of decision-making processes relying on forecast information and enable their wide-range dissemination based on a standardised approach.

Evaluating virtual hosted desktops for graphics-intensive astronomy

NASA Astrophysics Data System (ADS)

Meade, B. F.; Fluke, C. J.

2018-04-01

Visualisation of data is critical to understanding astronomical phenomena. Today, many instruments produce datasets that are too big to be downloaded to a local computer, yet many of the visualisation tools used by astronomers are deployed only on desktop computers. Cloud computing is increasingly used to provide a computation and simulation platform in astronomy, but it also offers great potential as a visualisation platform. Virtual hosted desktops, with graphics processing unit (GPU) acceleration, allow interactive, graphics-intensive desktop applications to operate co-located with astronomy datasets stored in remote data centres. By combining benchmarking and user experience testing, with a cohort of 20 astronomers, we investigate the viability of replacing physical desktop computers with virtual hosted desktops. In our work, we compare two Apple MacBook computers (one old and one new, representing hardware and opposite ends of the useful lifetime) with two virtual hosted desktops: one commercial (Amazon Web Services) and one in a private research cloud (the Australian NeCTAR Research Cloud). For two-dimensional image-based tasks and graphics-intensive three-dimensional operations - typical of astronomy visualisation workflows - we found that benchmarks do not necessarily provide the best indication of performance. When compared to typical laptop computers, virtual hosted desktops can provide a better user experience, even with lower performing graphics cards. We also found that virtual hosted desktops are equally simple to use, provide greater flexibility in choice of configuration, and may actually be a more cost-effective option for typical usage profiles.

What do Cells Really Look Like? An Inquiry into Students' Difficulties in Visualising a 3-D Biological Cell and Lessons for Pedagogy

NASA Astrophysics Data System (ADS)

Vijapurkar, Jyotsna; Kawalkar, Aisha; Nambiar, Priya

2014-04-01

In our explorations of students' concepts in an inquiry science classroom with grade 6 students from urban schools in India, we uncovered a variety of problems in their understanding of biological cells as structural and functional units of living organisms. In particular, we found not only that they visualised the cell as a two-dimensional (2-D) structure, instead of a closed three-dimensional (3-D) functional unit, but that they had a strong resistance to changing their 2-D conception to a 3-D one. Based on analyses of students' oral as well as written descriptions of cells in the classroom, and of models they made of the cell, we were able to identify the causes of students' difficulties in correctly visualising the cell. These insights helped us design a pedagogy involving guided discussions and activities that challenges students' 2-D conceptions of the cell. The activities entail very simple, low-cost, easily doable techniques to help students visualise the cell and to understand that it would not be able to function if its structure were 2-D. We also present the results of our investigations of conceptions of grade 7 students and biology undergraduates, revealing that the incorrect 2-D mental model can persist right up to the college level if it is not explicitly addressed. The classroom interactions described in this study illustrate how students' ideas can be probed and addressed in the classroom using pedagogical action research.

Visualisation of Interaction Footprints for Engagement in Online Communities

ERIC Educational Resources Information Center

Glahn, Christian; Specht, Marcus; Koper, Rob

2009-01-01

Contextualised and ubiquitous learning are relatively new research areas that combine the latest developments in ubiquitous and context aware computing with educational approaches in order to provide structure to more situated and context aware learning. The majority of recent activities in contextualised and ubiquitous learning focus on mobile…

The host-pathogen interaction between wheat and yellow rust induces temporally coordinated waves of gene expression.

PubMed

Dobon, Albor; Bunting, Daniel C E; Cabrera-Quio, Luis Enrique; Uauy, Cristobal; Saunders, Diane G O

2016-05-20

Understanding how plants and pathogens modulate gene expression during the host-pathogen interaction is key to uncovering the molecular mechanisms that regulate disease progression. Recent advances in sequencing technologies have provided new opportunities to decode the complexity of such interactions. In this study, we used an RNA-based sequencing approach (RNA-seq) to assess the global expression profiles of the wheat yellow rust pathogen Puccinia striiformis f. sp. tritici (PST) and its host during infection. We performed a detailed RNA-seq time-course for a susceptible and a resistant wheat host infected with PST. This study (i) defined the global gene expression profiles for PST and its wheat host, (ii) substantially improved the gene models for PST, (iii) evaluated the utility of several programmes for quantification of global gene expression for PST and wheat, and (iv) identified clusters of differentially expressed genes in the host and pathogen. By focusing on components of the defence response in susceptible and resistant hosts, we were able to visualise the effect of PST infection on the expression of various defence components and host immune receptors. Our data showed sequential, temporally coordinated activation and suppression of expression of a suite of immune-response regulators that varied between compatible and incompatible interactions. These findings provide the framework for a better understanding of how PST causes disease and support the idea that PST can suppress the expression of defence components in wheat to successfully colonize a susceptible host.

Using game engine for 3D terrain visualisation of GIS data: A review

NASA Astrophysics Data System (ADS)

Che Mat, Ruzinoor; Shariff, Abdul Rashid Mohammed; Nasir Zulkifli, Abdul; Shafry Mohd Rahim, Mohd; Hafiz Mahayudin, Mohd

2014-06-01

This paper reviews on the 3D terrain visualisation of GIS data using game engines that are available in the market as well as open source. 3D terrain visualisation is a technique used to visualise terrain information from GIS data such as a digital elevation model (DEM), triangular irregular network (TIN) and contour. Much research has been conducted to transform the 2D view of map to 3D. There are several terrain visualisation softwares that are available for free, which include Cesium, Hftool and Landserf. This review paper will help interested users to better understand the current state of art in 3D terrain visualisation of GIS data using game engines.

bioWeb3D: an online webGL 3D data visualisation tool

PubMed Central

2013-01-01

Background Data visualization is critical for interpreting biological data. However, in practice it can prove to be a bottleneck for non trained researchers; this is especially true for three dimensional (3D) data representation. Whilst existing software can provide all necessary functionalities to represent and manipulate biological 3D datasets, very few are easily accessible (browser based), cross platform and accessible to non-expert users. Results An online HTML5/WebGL based 3D visualisation tool has been developed to allow biologists to quickly and easily view interactive and customizable three dimensional representations of their data along with multiple layers of information. Using the WebGL library Three.js written in Javascript, bioWeb3D allows the simultaneous visualisation of multiple large datasets inputted via a simple JSON, XML or CSV file, which can be read and analysed locally thanks to HTML5 capabilities. Conclusions Using basic 3D representation techniques in a technologically innovative context, we provide a program that is not intended to compete with professional 3D representation software, but that instead enables a quick and intuitive representation of reasonably large 3D datasets. PMID:23758781

High-speed flow visualization in hypersonic, transonic, and shock tube flows

NASA Astrophysics Data System (ADS)

Kleine, H.; Olivier, H.

2017-02-01

High-speed flow visualisation has played an important role in the investigations conducted at the Stoßwellenlabor of the RWTH Aachen University for many decades. In addition to applying the techniques of high-speed imaging, this laboratory has been actively developing new or enhanced visualisation techniques and approaches such as various schlieren methods or time-resolved Mach-Zehnder interferometry. The investigated high-speed flows are inherently highly transient, with flow Mach numbers ranging from about M = 0.7 to M = 8. The availability of modern high-speed cameras has allowed us to expand the investigations into problems where reduced reproducibility had so far limited the amount of information that could be extracted from a limited number of flow visualisation records. Following a brief historical overview, some examples of recent studies are given, which represent the breadth of applications in which high-speed imaging has been an essential diagnostic tool to uncover the physics of high-speed flows. Applications include the stability of hypersonic corner flows, the establishment of shock wave systems in transonic airfoil flow, and the complexities of the interactions of shock waves with obstacles of various shapes.

Movement visualisation in virtual reality rehabilitation of the lower limb: a systematic review.

PubMed

Ferreira Dos Santos, Luara; Christ, Oliver; Mate, Kedar; Schmidt, Henning; Krüger, Jörg; Dohle, Christian

2016-12-19

Virtual reality (VR) based applications play an increasing role in motor rehabilitation. They provide an interactive and individualized environment in addition to increased motivation during motor tasks as well as facilitating motor learning through multimodal sensory information. Several previous studies have shown positive effect of VR-based treatments for lower extremity motor rehabilitation in neurological conditions, but the characteristics of these VR applications have not been systematically investigated. The visual information on the user's movement in the virtual environment, also called movement visualisation (MV), is a key element of VR-based rehabilitation interventions. The present review proposes categorization of Movement Visualisations of VR-based rehabilitation therapy for neurological conditions and also summarises current research in lower limb application. A systematic search of literature on VR-based intervention for gait and balance rehabilitation in neurological conditions was performed in the databases namely; MEDLINE (Ovid), AMED, EMBASE, CINAHL, and PsycInfo. Studies using non-virtual environments or applications to improve cognitive function, activities of daily living, or psychotherapy were excluded. The VR interventions of the included studies were analysed on their MV. In total 43 publications were selected based on the inclusion criteria. Seven distinct MV groups could be differentiated: indirect MV (N = 13), abstract MV (N = 11), augmented reality MV (N = 9), avatar MV (N = 5), tracking MV (N = 4), combined MV (N = 1), and no MV (N = 2). In two included articles the visualisation conditions included different MV groups within the same study. Additionally, differences in motor performance could not be analysed because of the differences in the study design. Three studies investigated different visualisations within the same MV group and hence limited information can be extracted from one study. The review demonstrates that individuals' movements during VR-based motor training can be displayed in different ways. Future studies are necessary to fundamentally explore the nature of this VR information and its effect on motor outcome.

On the formation of string cavitation inside fuel injectors

NASA Astrophysics Data System (ADS)

Reid, B. A.; Gavaises, M.; Mitroglou, N.; Hargrave, G. K.; Garner, C. P.; Long, E. J.; McDavid, R. M.

2014-01-01

The formation of vortex or `string' cavitation has been visualised in the flow upstream of the injection hole inlet of an automotive-sized optical diesel fuel injector nozzle operating at pressures up to 2,000 bar. Three different nozzle geometries and three-dimensional flow simulations have been employed to describe how, for two adjacent nozzle holes, their relative positions influenced the formation and hole-to-hole interaction of the observed string cavitation vortices. Each hole was shown to contain two counter-rotating vortices: the first extending upstream on axis with the nozzle hole into the nozzle sac volume and the second forming a single `bridging' string linked to the adjacent hole. Steady-state and transient fuel injection conditions were shown to produce significantly different nozzle-flow characteristics with regard to the formation and interaction of these vortices in the geometries tested, with good agreement between the experimental and simulation results being achieved. The study further confirms that the visualised vortices do not cavitate themselves but act as carriers of gas-phase components within the injector flow.

Data visualisation in surveillance for injury prevention and control: conceptual bases and case studies

PubMed Central

Martinez, Ramon; Ordunez, Pedro; Soliz, Patricia N; Ballesteros, Michael F

2016-01-01

Background The complexity of current injury-related health issues demands the usage of diverse and massive data sets for comprehensive analyses, and application of novel methods to communicate data effectively to the public health community, decision-makers and the public. Recent advances in information visualisation, availability of new visual analytic methods and tools, and progress on information technology provide an opportunity for shaping the next generation of injury surveillance. Objective To introduce data visualisation conceptual bases, and propose a visual analytic and visualisation platform in public health surveillance for injury prevention and control. Methods The paper introduces data visualisation conceptual bases, describes a visual analytic and visualisation platform, and presents two real-world case studies illustrating their application in public health surveillance for injury prevention and control. Results Application of visual analytic and visualisation platform is presented as solution for improved access to heterogeneous data sources, enhance data exploration and analysis, communicate data effectively, and support decision-making. Conclusions Applications of data visualisation concepts and visual analytic platform could play a key role to shape the next generation of injury surveillance. Visual analytic and visualisation platform could improve data use, the analytic capacity, and ability to effectively communicate findings and key messages. The public health surveillance community is encouraged to identify opportunities to develop and expand its use in injury prevention and control. PMID:26728006

Information visualisation based on graph models

NASA Astrophysics Data System (ADS)

Kasyanov, V. N.; Kasyanova, E. V.

2013-05-01

Information visualisation is a key component of support tools for many applications in science and engineering. A graph is an abstract structure that is widely used to model information for its visualisation. In this paper, we consider practical and general graph formalism called hierarchical graphs and present the Higres and Visual Graph systems aimed at supporting information visualisation on the base of hierarchical graph models.

Facilitating participatory multilevel decision-making by using interactive mental maps.

PubMed

Pfeiffer, Constanze; Glaser, Stephanie; Vencatesan, Jayshree; Schliermann-Kraus, Elke; Drescher, Axel; Glaser, Rüdiger

2008-11-01

Participation of citizens in political, economic or social decisions is increasingly recognized as a precondition to foster sustainable development processes. Since spatial information is often important during planning and decision making, participatory mapping gains in popularity. However, little attention has been paid to the fact that information must be presented in a useful way to reach city planners and policy makers. Above all, the importance of visualisation tools to support collaboration, analytical reasoning, problem solving and decision-making in analysing and planning processes has been underestimated. In this paper, we describe how an interactive mental map tool has been developed in a highly interdisciplinary disaster management project in Chennai, India. We moved from a hand drawn mental maps approach to an interactive mental map tool. This was achieved by merging socio-economic and geospatial data on infrastructure, local perceptions, coping and adaptation strategies with remote sensing data and modern technology of map making. This newly developed interactive mapping tool allowed for insights into different locally-constructed realities and facilitated the communication of results to the wider public and respective policy makers. It proved to be useful in visualising information and promoting participatory decision-making processes. We argue that the tool bears potential also for health research projects. The interactive mental map can be used to spatially and temporally assess key health themes such as availability of, and accessibility to, existing health care services, breeding sites of disease vectors, collection and storage of water, waste disposal, location of public toilets or defecation sites.

Information visualisation for science and policy: engaging users and avoiding bias.

PubMed

McInerny, Greg J; Chen, Min; Freeman, Robin; Gavaghan, David; Meyer, Miriah; Rowland, Francis; Spiegelhalter, David J; Stefaner, Moritz; Tessarolo, Geizi; Hortal, Joaquin

2014-03-01

Visualisations and graphics are fundamental to studying complex subject matter. However, beyond acknowledging this value, scientists and science-policy programmes rarely consider how visualisations can enable discovery, create engaging and robust reporting, or support online resources. Producing accessible and unbiased visualisations from complicated, uncertain data requires expertise and knowledge from science, policy, computing, and design. However, visualisation is rarely found in our scientific training, organisations, or collaborations. As new policy programmes develop [e.g., the Intergovernmental Platform on Biodiversity and Ecosystem Services (IPBES)], we need information visualisation to permeate increasingly both the work of scientists and science policy. The alternative is increased potential for missed discoveries, miscommunications, and, at worst, creating a bias towards the research that is easiest to display. Copyright © 2014 Elsevier Ltd. All rights reserved.

Dynamic visualisation of municipal waste management performance in the EU using Ternary Diagram method.

PubMed

Pomberger, R; Sarc, R; Lorber, K E

2017-03-01

This contribution describes the dynamic visualisation of European (EU 28) municipal waste management performance, using the Ternary Diagram Method. Municipal waste management performance depends primarily on three treatment categories: recycling & composting, incineration and landfilling. The framework of current municipal waste management including recycling targets, etc. is given by the Waste Framework Directive - 2008/98/EC. The proposed Circular Economy Package should stimulate Europe's transition towards more sustainable resources and energy oriented waste management. The Package also includes a revised legislative proposal on waste that sets ambitious recycling rates for municipal waste for 2025 (60%) and 2030 (65%). Additionally, the new calculation method for monitoring the attainment of the targets should be applied. In 2014, ca. 240 million tonnes of municipal waste were generated in the EU. While in 1995, 17% were recycled and composted, 14% incinerated and 64% landfilled, in 2014 ca. 71% were recovered but 28% landfilled only. Considering the treatment performance of the individual EU member states, the EU 28 can be divided into three groups, namely: "Recovery Countries", "Transition Countries" and "Landfilling Countries". Using Ternary Diagram Method, three types of visualization for the municipal waste management performance have been investigated and extensively described. Therefore, for better understanding of municipal waste management performance in the last 20years, dynamic visualisation of the Eurostat table-form data on all 28 member states of the EU has been carried out in three different ways: 1. "Performance Positioning" of waste management unit(s) at a specific date; 2. "Performance dynamics" over a certain time period and; 3. "Performance development" expressed as a track(s). Results obtained show that the Ternary Diagram Method is very well suited to be used for better understanding of past developments and coherences, for monitoring of current situations and prognosis of future paths. One of the interesting coherences shown by the method is the linked development of recycling & composting (60-65%) with incineration (40-35%) performance over the last 20years in the EU 28. Copyright © 2017 Elsevier Ltd. All rights reserved.

A new way of visualising quantum fields

NASA Astrophysics Data System (ADS)

Linde, Helmut

2018-05-01

Quantum field theory (QFT) is the basis of some of the most fundamental theories in modern physics, but it is not an easy subject to learn. In the present article we intend to pave the way from quantum mechanics to QFT for students at early graduate or advanced undergraduate level. More specifically, we propose a new way of visualising the wave function Ψ of a linear chain of interacting quantum harmonic oscillators, which can be seen as a model for a simple one-dimensional bosonic quantum field. The main idea is to draw randomly chosen classical states of the chain superimposed upon each other and use a grey scale to represent the value of Ψ at the corresponding coordinates of the quantised system. Our goal is to establish a better intuitive understanding of the mathematical objects underlying quantum field theories and solid state physics.

Applying 3D Dynamic Visualisation to (Palaeo) Geomorphic Reconstruction: Modelling a Tenth Century Jökulhlaup at Sólheimajökull Glacier, South Iceland.

NASA Astrophysics Data System (ADS)

Booth, Laura; Isaacs, John

2014-05-01

Jökulhlaup (glacial outburst floods) are caused by subglacial geothermal activity melting overlying ice, or by draining of ice-dammed lakes. They pose a recurring hazard along Iceland's south coast where volcano-glacial interactions create often unpredictable, high-magnitude floods. Gathering information about past floods is crucial for projecting findings to present day scenarios and developing future predictions for contemporary flood routes. Understanding the physical setting or surrounding environment is essential in palaeo-flood reconstruction as drainage routes are ultimately defined by local topography and changing ice cover. At Sólheimajökull glacier, which drains the southern portion of Mýrdalsjökull ice cap, field evidence has been collected of a Tenth Century flood, recorded in the Icelander's Landnámabók (Book of Settlements). It was an exceptional event in terms of generation, magnitude and geomorphic impact. Although now fragmented and piecemeal, many of its direct (and indirect) geomorphological and sedimentary markers are still relatively well preserved and have been identified, mapped and dated to unravel the sequence of events played out during this significant episode in the glacial history and complex regional flood chronology. VolcVis, an innovative, bespoke visualisation platform, is developed and applied for the first time in visualising volcanic jökulhlaup. The platform is created using the Microsoft XNA game development framework, which facilitates rapid game engine production by providing a set of tools utilising a managed runtime environment. VolcVis can render large amounts of data efficiently and still provide an extremely high level of interaction with the data being presented, including full freedom of motion. This enables synthesis and presentation of field results from Sólheimajökull in a novel way, creating an interactive, multi-perspective, three-dimensional (3D) prototype model. The platform combines Digital Elevation Models of the area with aerial photography to create a 3D virtual environment, which provides the basis for entering field data to the geomorphic reconstruction. The result is a visual simulation of Sólheimajökull's Tenth Century physical environment which places the flood into geomorphic and topographic context. The wider implications of developing this tool are many when considering its ease of use and first-person navigational controls. The animations allow immediate exposure to environments that are otherwise lost in reality. VolcVis is a powerful tool in bringing reconstructed palaeo-environments back to life, albeit in the virtual sphere. It allows a uniquely contemporary appreciation of an elapsed event; yet which was a critical episode in the geomorphic evolution of this dynamic region. When field data are pieced together into a simulation, they hold a greater cohesive strength, giving the results wider applicability and relevance to a range of users and decision-makers, serving both technical and nontechnical perspectives. VolcVis' ability to dynamically display field data presents new possibilities for generating hypotheses, and for data sharing with Icelandic hazard mitigation authorities and the general public.

Data visualisation in surveillance for injury prevention and control: conceptual bases and case studies.

PubMed

Martinez, Ramon; Ordunez, Pedro; Soliz, Patricia N; Ballesteros, Michael F

2016-04-01

The complexity of current injury-related health issues demands the usage of diverse and massive data sets for comprehensive analyses, and application of novel methods to communicate data effectively to the public health community, decision-makers and the public. Recent advances in information visualisation, availability of new visual analytic methods and tools, and progress on information technology provide an opportunity for shaping the next generation of injury surveillance. To introduce data visualisation conceptual bases, and propose a visual analytic and visualisation platform in public health surveillance for injury prevention and control. The paper introduces data visualisation conceptual bases, describes a visual analytic and visualisation platform, and presents two real-world case studies illustrating their application in public health surveillance for injury prevention and control. Application of visual analytic and visualisation platform is presented as solution for improved access to heterogeneous data sources, enhance data exploration and analysis, communicate data effectively, and support decision-making. Applications of data visualisation concepts and visual analytic platform could play a key role to shape the next generation of injury surveillance. Visual analytic and visualisation platform could improve data use, the analytic capacity, and ability to effectively communicate findings and key messages. The public health surveillance community is encouraged to identify opportunities to develop and expand its use in injury prevention and control. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

An Assessment of ELINT Exploitation for Situational Awareness Visualisations on Operator Situational Awareness

DTIC Science & Technology

2006-10-01

C L A S I F I C A T I O N An Assessment of ELINT Exploitation for Situational Awareness Visualisations on Operator Situational...environment. The An Assessment of ELINT Exploitation for Situational Awareness Visualisations on Operator Situational Awareness EXECUTIVE SUMMARY...1. ELEXSA’s Process of Sequential Enrichment. 2 Figure 2. Sample ELEXSA Visualisation . 3 Figure 3. Example Llama/Cheetah Network Layout. 5

Motion-adapted catheter navigation with real-time instantiation and improved visualisation

PubMed Central

Kwok, Ka-Wai; Wang, Lichao; Riga, Celia; Bicknell, Colin; Cheshire, Nicholas; Yang, Guang-Zhong

2014-01-01

The improvements to catheter manipulation by the use of robot-assisted catheter navigation for endovascular procedures include increased precision, stability of motion and operator comfort. However, navigation through the vasculature under fluoroscopic guidance is still challenging, mostly due to physiological motion and when tortuous vessels are involved. In this paper, we propose a motion-adaptive catheter navigation scheme based on shape modelling to compensate for these dynamic effects, permitting predictive and dynamic navigations. This allows for timed manipulations synchronised with the vascular motion. The technical contribution of the paper includes the following two aspects. Firstly, a dynamic shape modelling and real-time instantiation scheme based on sparse data obtained intra-operatively is proposed for improved visualisation of the 3D vasculature during endovascular intervention. Secondly, a reconstructed frontal view from the catheter tip using the derived dynamic model is used as an interventional aid to user guidance. To demonstrate the practical value of the proposed framework, a simulated aortic branch cannulation procedure is used with detailed user validation to demonstrate the improvement in navigation quality and efficiency. PMID:24744817

A Visualisation Tool to Aid Exploration of Students' Interactions in Asynchronous Online Communication

ERIC Educational Resources Information Center

Jyothi, Sujana; McAvinia, Claire; Keating, John

2012-01-01

Much research in recent years has focused on the introduction of virtual learning environments (VLEs) to universities, documenting practice, and sharing experience ([2], [9], [45] and [58]). Attention has been directed towards the importance of online dialogue for learning as a defining feature of the VLE. Communicative tools are an important…

brain-coX: investigating and visualising gene co-expression in seven human brain transcriptomic datasets.

PubMed

Freytag, Saskia; Burgess, Rosemary; Oliver, Karen L; Bahlo, Melanie

2017-06-08

The pathogenesis of neurological and mental health disorders often involves multiple genes, complex interactions, as well as brain- and development-specific biological mechanisms. These characteristics make identification of disease genes for such disorders challenging, as conventional prioritisation tools are not specifically tailored to deal with the complexity of the human brain. Thus, we developed a novel web-application-brain-coX-that offers gene prioritisation with accompanying visualisations based on seven gene expression datasets in the post-mortem human brain, the largest such resource ever assembled. We tested whether our tool can correctly prioritise known genes from 37 brain-specific KEGG pathways and 17 psychiatric conditions. We achieved average sensitivity of nearly 50%, at the same time reaching a specificity of approximately 75%. We also compared brain-coX's performance to that of its main competitors, Endeavour and ToppGene, focusing on the ability to discover novel associations. Using a subset of the curated SFARI autism gene collection we show that brain-coX's prioritisations are most similar to SFARI's own curated gene classifications. brain-coX is the first prioritisation and visualisation web-tool targeted to the human brain and can be freely accessed via http://shiny.bioinf.wehi.edu.au/freytag.s/ .

Visualisation of the Bonebridge by means of CT and CBCT

PubMed Central

2013-01-01

Background With the Bonebridge, a new bone-anchored hearing aid has been available since March 2012. The objective of the study was to analyse the visualisation of the implant itself as well as its impact on the representation of the bony structures of the petrosal bone in CT, MRI and cone beam CT (CBCT). Methods The Bonebridge was implanted unilaterally in two completely prepared human heads. The radiological imaging by means of CBCT, 64-slice CT, 1.5-T and 3.0-T MRI was conducted both preoperatively and postoperatively. The images were subsequently evaluated from both the ENT medical and nd radiological perspectives. Results As anticipated, no visualisation of the implant or of the petrosal bones could be realised on MRI because of the interactive technology and the magnet artefact. In contrast, an excellent evaluability of the implant itself as well as of the surrounding neurovascular structures (sinus sigmoideus, skull base, middle ear, inner ear, inner auditory canal) was exhibited in both the CT and in the CBCT. Conclusion The Bonebridge can be excellently imaged with the radiological imaging technologies of CT and CBCT. In the process, CBCT shows discrete advantages in comparison with CT. No relevant restrictions in image quality in the evaluation of the bony structures of the petrosal bones could be seen. PMID:24004903

linkedISA: semantic representation of ISA-Tab experimental metadata.

PubMed

González-Beltrán, Alejandra; Maguire, Eamonn; Sansone, Susanna-Assunta; Rocca-Serra, Philippe

2014-01-01

Reporting and sharing experimental metadata- such as the experimental design, characteristics of the samples, and procedures applied, along with the analysis results, in a standardised manner ensures that datasets are comprehensible and, in principle, reproducible, comparable and reusable. Furthermore, sharing datasets in formats designed for consumption by humans and machines will also maximize their use. The Investigation/Study/Assay (ISA) open source metadata tracking framework facilitates standards-compliant collection, curation, visualization, storage and sharing of datasets, leveraging on other platforms to enable analysis and publication. The ISA software suite includes several components used in increasingly diverse set of life science and biomedical domains; it is underpinned by a general-purpose format, ISA-Tab, and conversions exist into formats required by public repositories. While ISA-Tab works well mainly as a human readable format, we have also implemented a linked data approach to semantically define the ISA-Tab syntax. We present a semantic web representation of the ISA-Tab syntax that complements ISA-Tab's syntactic interoperability with semantic interoperability. We introduce the linkedISA conversion tool from ISA-Tab to the Resource Description Framework (RDF), supporting mappings from the ISA syntax to multiple community-defined, open ontologies and capitalising on user-provided ontology annotations in the experimental metadata. We describe insights of the implementation and how annotations can be expanded driven by the metadata. We applied the conversion tool as part of Bio-GraphIIn, a web-based application supporting integration of the semantically-rich experimental descriptions. Designed in a user-friendly manner, the Bio-GraphIIn interface hides most of the complexities to the users, exposing a familiar tabular view of the experimental description to allow seamless interaction with the RDF representation, and visualising descriptors to drive the query over the semantic representation of the experimental design. In addition, we defined queries over the linkedISA RDF representation and demonstrated its use over the linkedISA conversion of datasets from Nature' Scientific Data online publication. Our linked data approach has allowed us to: 1) make the ISA-Tab semantics explicit and machine-processable, 2) exploit the existing ontology-based annotations in the ISA-Tab experimental descriptions, 3) augment the ISA-Tab syntax with new descriptive elements, 4) visualise and query elements related to the experimental design. Reasoning over ISA-Tab metadata and associated data will facilitate data integration and knowledge discovery.

BLAST Ring Image Generator (BRIG): simple prokaryote genome comparisons

PubMed Central

2011-01-01

Background Visualisation of genome comparisons is invaluable for helping to determine genotypic differences between closely related prokaryotes. New visualisation and abstraction methods are required in order to improve the validation, interpretation and communication of genome sequence information; especially with the increasing amount of data arising from next-generation sequencing projects. Visualising a prokaryote genome as a circular image has become a powerful means of displaying informative comparisons of one genome to a number of others. Several programs, imaging libraries and internet resources already exist for this purpose, however, most are either limited in the number of comparisons they can show, are unable to adequately utilise draft genome sequence data, or require a knowledge of command-line scripting for implementation. Currently, there is no freely available desktop application that enables users to rapidly visualise comparisons between hundreds of draft or complete genomes in a single image. Results BLAST Ring Image Generator (BRIG) can generate images that show multiple prokaryote genome comparisons, without an arbitrary limit on the number of genomes compared. The output image shows similarity between a central reference sequence and other sequences as a set of concentric rings, where BLAST matches are coloured on a sliding scale indicating a defined percentage identity. Images can also include draft genome assembly information to show read coverage, assembly breakpoints and collapsed repeats. In addition, BRIG supports the mapping of unassembled sequencing reads against one or more central reference sequences. Many types of custom data and annotations can be shown using BRIG, making it a versatile approach for visualising a range of genomic comparison data. BRIG is readily accessible to any user, as it assumes no specialist computational knowledge and will perform all required file parsing and BLAST comparisons automatically. Conclusions There is a clear need for a user-friendly program that can produce genome comparisons for a large number of prokaryote genomes with an emphasis on rapidly utilising unfinished or unassembled genome data. Here we present BRIG, a cross-platform application that enables the interactive generation of comparative genomic images via a simple graphical-user interface. BRIG is freely available for all operating systems at http://sourceforge.net/projects/brig/. PMID:21824423

BLAST Ring Image Generator (BRIG): simple prokaryote genome comparisons.

PubMed

Alikhan, Nabil-Fareed; Petty, Nicola K; Ben Zakour, Nouri L; Beatson, Scott A

2011-08-08

Visualisation of genome comparisons is invaluable for helping to determine genotypic differences between closely related prokaryotes. New visualisation and abstraction methods are required in order to improve the validation, interpretation and communication of genome sequence information; especially with the increasing amount of data arising from next-generation sequencing projects. Visualising a prokaryote genome as a circular image has become a powerful means of displaying informative comparisons of one genome to a number of others. Several programs, imaging libraries and internet resources already exist for this purpose, however, most are either limited in the number of comparisons they can show, are unable to adequately utilise draft genome sequence data, or require a knowledge of command-line scripting for implementation. Currently, there is no freely available desktop application that enables users to rapidly visualise comparisons between hundreds of draft or complete genomes in a single image. BLAST Ring Image Generator (BRIG) can generate images that show multiple prokaryote genome comparisons, without an arbitrary limit on the number of genomes compared. The output image shows similarity between a central reference sequence and other sequences as a set of concentric rings, where BLAST matches are coloured on a sliding scale indicating a defined percentage identity. Images can also include draft genome assembly information to show read coverage, assembly breakpoints and collapsed repeats. In addition, BRIG supports the mapping of unassembled sequencing reads against one or more central reference sequences. Many types of custom data and annotations can be shown using BRIG, making it a versatile approach for visualising a range of genomic comparison data. BRIG is readily accessible to any user, as it assumes no specialist computational knowledge and will perform all required file parsing and BLAST comparisons automatically. There is a clear need for a user-friendly program that can produce genome comparisons for a large number of prokaryote genomes with an emphasis on rapidly utilising unfinished or unassembled genome data. Here we present BRIG, a cross-platform application that enables the interactive generation of comparative genomic images via a simple graphical-user interface. BRIG is freely available for all operating systems at http://sourceforge.net/projects/brig/.

Bringing Data to Life into an Introductory Statistics Course with Gapminder

ERIC Educational Resources Information Center

Le, Dai-Trang

2013-01-01

"Gapminder" is a free and easy to use software for visualising real-world data in multiple dimensions. The simple format of the Cartesian coordinate system is used in a dynamic and interactive way to convey a great deal of information. This tool can be readily used to arouse students' natural curiosity regarding world events and to…

The Dublin Dashboard: Design and Development of a Real-Time Analytical Urban Dashboard

NASA Astrophysics Data System (ADS)

McArdle, G.; Kitchin, R.

2016-09-01

As many cities increase in size across multiple dimensions such as population, economic output and physical size, new methods for understanding and managing cities are required. Data produced by and about urban environments offer insight into what is happening in cities. Real-time data from sensors within the city record current transport and environmental conditions such as noise levels, water levels, journey times and public transport delays. Similarly administrative data such as demographics, employment statistics, property prices and crime rates all provide insight into how a city is evolving. Traditionally, these data were maintained separately and managed by individual city departments. Advances in technology and a move to open-government have placed many of these data in the public domain. Urban dashboards have emerged as a technique to visualise these data in an accessible way. This paper describes the implementation of one such dashboard, the Dublin Dashboard, an interactive website which collects, analyses and visualises data from a variety of sources about Dublin in Ireland through a series of interactive maps, graphs and applications. This paper describes the approach, the data and the technology used to develop the Dublin Dashboard and acts as a guideline for developing urban dashboards in other cities.

Gebiss: an ImageJ plugin for the specification of ground truth and the performance evaluation of 3D segmentation algorithms

PubMed Central

2011-01-01

Background Image segmentation is a crucial step in quantitative microscopy that helps to define regions of tissues, cells or subcellular compartments. Depending on the degree of user interactions, segmentation methods can be divided into manual, automated or semi-automated approaches. 3D image stacks usually require automated methods due to their large number of optical sections. However, certain applications benefit from manual or semi-automated approaches. Scenarios include the quantification of 3D images with poor signal-to-noise ratios or the generation of so-called ground truth segmentations that are used to evaluate the accuracy of automated segmentation methods. Results We have developed Gebiss; an ImageJ plugin for the interactive segmentation, visualisation and quantification of 3D microscopic image stacks. We integrated a variety of existing plugins for threshold-based segmentation and volume visualisation. Conclusions We demonstrate the application of Gebiss to the segmentation of nuclei in live Drosophila embryos and the quantification of neurodegeneration in Drosophila larval brains. Gebiss was developed as a cross-platform ImageJ plugin and is freely available on the web at http://imaging.bii.a-star.edu.sg/projects/gebiss/. PMID:21668958

DataView: a computational visualisation system for multidisciplinary design and analysis

NASA Astrophysics Data System (ADS)

Wang, Chengen

2016-01-01

Rapidly processing raw data and effectively extracting underlining information from huge volumes of multivariate data become essential to all decision-making processes in sectors like finance, government, medical care, climate analysis, industries, science, etc. Remarkably, visualisation is recognised as a fundamental technology that props up human comprehension, cognition and utilisation of burgeoning amounts of heterogeneous data. This paper presents a computational visualisation system, named DataView, which has been developed for graphically displaying and capturing outcomes of multiphysics problem-solvers widely used in engineering fields. The DataView is functionally composed of techniques for table/diagram representation, and graphical illustration of scalar, vector and tensor fields. The field visualisation techniques are implemented on the basis of a range of linear and non-linear meshes, which flexibly adapts to disparate data representation schemas adopted by a variety of disciplinary problem-solvers. The visualisation system has been successfully applied to a number of engineering problems, of which some illustrations are presented to demonstrate effectiveness of the visualisation techniques.

The PRo3D View Planner - interactive simulation of Mars rover camera views to optimise capturing parameters

NASA Astrophysics Data System (ADS)

Traxler, Christoph; Ortner, Thomas; Hesina, Gerd; Barnes, Robert; Gupta, Sanjeev; Paar, Gerhard

2017-04-01

High resolution Digital Terrain Models (DTM) and Digital Outcrop Models (DOM) are highly useful for geological analysis and mission planning in planetary rover missions. PRo3D, developed as part of the EU-FP7 PRoViDE project, is a 3D viewer in which orbital DTMs and DOMs derived from rover stereo imagery can be rendered in a virtual environment for exploration and analysis. It allows fluent navigation over planetary surface models and provides a variety of measurement and annotation tools to complete an extensive geological interpretation. A key aspect of the image collection during planetary rover missions is determining the optimal viewing positions of rover instruments from different positions ('wide baseline stereo'). For the collection of high quality panoramas and stereo imagery the visibility of regions of interest from those positions, and the amount of common features shared by each stereo-pair, or image bundle is crucial. The creation of a highly accurate and reliable 3D surface, in the form of an Ordered Point Cloud (OPC), of the planetary surface, with a low rate of error and a minimum of artefacts, is greatly enhanced by using images that share a high amount of features and a sufficient overlap for wide baseline stereo or target selection. To support users in the selection of adequate viewpoints an interactive View Planner was integrated into PRo3D. The users choose from a set of different rovers and their respective instruments. PRo3D supports for instance the PanCam instrument of ESA's ExoMars 2020 rover mission or the Mastcam-Z camera of NASA's Mars2020 mission. The View Planner uses a DTM obtained from orbiter imagery, which can also be complemented with rover-derived DOMs as the mission progresses. The selected rover is placed onto a position on the terrain - interactively or using the current rover pose as known from the mission. The rover's base polygon and its local coordinate axes, and the chosen instrument's up- and forward vectors are visualised. The parameters of the instrument's pan and tilt unit (PTU) can be altered via the user interface, or alternatively calculated by selecting a target point on the visualised DTM. In the 3D view, the visible region of the planetary surface, resulting from these settings and the camera field-of-view is visualised by a highlighted region with a red border, representing the instruments footprint. The camera view is simulated and rendered in a separate window and PTU parameters can be interactively adjusted, allowing viewpoints, directions, and the expected image to be visualised in real-time in order to allow users the fine-tuning of these settings. In this way, ideal viewpoints and PTU settings for various rover models and instruments can efficiently be defined, resulting in an optimum imagery of the regions of interest.

Spatial Visualisation and Cognitive Style: How Do Gender Differences Play Out?

ERIC Educational Resources Information Center

Ramful, Ajay; Lowrie, Tom

2015-01-01

This study investigated potential gender differences in a sample of 807 Year 6 Singaporean students in relation to two variables: spatial visualisation ability and cognitive style. In contrast to the general trend, overall there were no significant gender differences on spatial visualisation ability. However, gender differences were prevalent…

Envisioning Possibilities: Visualising as Enquiry in Literacy Studies

ERIC Educational Resources Information Center

Smith, Anna; Hall, Matthew; Sousanis, Nick

2015-01-01

Drawing from the research methods of three distinct literacy studies, in this piece, we highlight the visualisation approaches integral to our enquiry processes as researchers working to make sense of literacy and learning. We aim to encourage, provoke even, a conversation about visualisation processes in literacy research by sharing the…

ACORNS: A Tool for the Visualisation and Modelling of Atypical Development

ERIC Educational Resources Information Center

Moore, D. G.; George, R.

2011-01-01

Across many academic disciplines visualisation and notation systems are used for modelling data and developing theory, but in child development visual models are not widely used; yet researchers and students of developmental difficulties may benefit from a visualisation and notation system which can clearly map developmental outcomes and…

Using Visualisation to Enhance Learning

ERIC Educational Resources Information Center

Statham, Mick

2014-01-01

Learning to use visualisation techniques in the classroom enables pupils and teachers to gain new insights into how concepts are formed and how to strengthen them, but visualisation is sometimes not what it seems. Learning by constructing meaning is a long-standing principle underpinning much of today's school science. In "Primary Science…

Visualising DNA in Classrooms Using Nile Blue

ERIC Educational Resources Information Center

Milne, Christine; Roche, Scott; McKay, David

2008-01-01

Giving students the opportunity to extract, manipulate and visualise DNA molecules enhances a constructivist approach to learning about modern techniques in biology and biotechnology Visualisation usually requires agarose gel electrophoresis and staining. In this article, we report on an alternative DNA stain, Nile Blue A, that may be used in the…

Interactive Visualization of Network Dynamics (Visualisation interactive de la dynamique des reseaux)

DTIC Science & Technology

2014-06-01

la prise de décision du commandement militaire, aux opérations de santé et de sûreté publique...comporter la dénomination « STO », « RTO » ou « AGARD » selon le cas, suivi du numéro de série. Des informations analogues, telles que le titre est la date...Bibliothécaire des ressources du savoir Secretariat General of Defence 061353 Bucharest R et D pour la défense Canada National Armaments

Characterisation of the Interaction between Toroidal Vortex Structures and Flame Front Propagation

NASA Astrophysics Data System (ADS)

Long, E. J.; Hargrave, G. K.; Jarvis, S.; Justham, T.; Halliwell, N.

2006-07-01

Experimental laser diagnostic data is presented for flame characterisation during interactions with toroidal vortices generated in the wake of an annular obstacle. A novel twin section combustion chamber has been utilised to allow the controlled formation of stable eddy structures into which a flame front can propagate. High speed laser sheet visualisation was employed to record the flow field and flame front temporal development and high-speed digital particle image velocimetry was used to quantify the velocity field of the unburnt mixture ahead of the flame front. Results provide characterisation of the toroidal vortex/flame front interaction for a range of vortex scales of and recirculation strengths.

Evaluation of bowel distension and mural visualisation using neutral oral contrast agents for multidetector-row computed tomography.

PubMed

Lim, Bee Kuan; Bux, Shaik Ismail; Rahmat, Kartini; Lam, Sze Yin; Liew, Yew Wai

2012-11-01

We compared the effectiveness of different types of non-commercial neutral oral contrast agents for bowel distension and mural visualisation in computed tomographic (CT) enterography. 90 consecutive patients from a group of 108 were randomly assigned to receive water (n = 30), 3.8% milk (n = 30) or 0.1% gastrografin (n = 30) as oral contrast agent. The results were independently reviewed by two radiologists who were blinded to the contrast agents used. The degree of bowel distension was qualitatively scored on a four-point scale. The discrimination of bowel loops, mural visualisation and visualisation of mucosal folds were evaluated on a 'yes' or 'no' basis. Side effects of the various agents were also recorded. 3.8% milk was significantly superior to water for bowel distension (jejunum, ileum and terminal ileum), discrimination of bowel loops (jejunum and ileum), mural visualisation and visualisation of mucosal folds (ileum and terminal ileum). It was also significantly superior to 0.1% gastrografin for bowel distension, discrimination of bowel loops, mural visualisation and visualisation of mucosal folds (jejunum, ileum and terminal ileum). However, 10% of patients who received 3.8% milk reported immediate post-test diarrhoea. No side effects were documented for patients who received water and 0.1% gastrografin. 3.8% milk is an effective and superior neutral oral contrast agent for the assessment of the jejunum, ileum and terminal ileum in CT enterography. However, further studies are needed to explore other suitable oral contrast agents for CT enterography in lactose- or cow's milk-intolerant patients.

The Understanding and Interpretation of Innovative Technology-Enabled Multidimensional Physical Activity Feedback in Patients at Risk of Future Chronic Disease

PubMed Central

Western, Max J.; Peacock, Oliver J.; Stathi, Afroditi; Thompson, Dylan

2015-01-01

Background Innovative physical activity monitoring technology can be used to depict rich visual feedback that encompasses the various aspects of physical activity known to be important for health. However, it is unknown whether patients who are at risk of chronic disease would understand such sophisticated personalised feedback or whether they would find it useful and motivating. The purpose of the present study was to determine whether technology-enabled multidimensional physical activity graphics and visualisations are comprehensible and usable for patients at risk of chronic disease. Method We developed several iterations of graphics depicting minute-by-minute activity patterns and integrated physical activity health targets. Subsequently, patients at moderate/high risk of chronic disease (n=29) and healthcare practitioners (n=15) from South West England underwent full 7-days activity monitoring followed by individual semi-structured interviews in which they were asked to comment on their own personalised visual feedback Framework analysis was used to gauge their interpretation and of personalised feedback, graphics and visualisations. Results We identified two main components focussing on (a) the interpretation of feedback designs and data and (b) the impact of personalised visual physical activity feedback on facilitation of health behaviour change. Participants demonstrated a clear ability to understand the sophisticated personal information plus an enhanced physical activity knowledge. They reported that receiving multidimensional feedback was motivating and could be usefully applied to facilitate their efforts in becoming more physically active. Conclusion Multidimensional physical activity feedback can be made comprehensible, informative and motivational by using appropriate graphics and visualisations. There is an opportunity to exploit the full potential created by technological innovation and provide sophisticated personalised physical activity feedback as an adjunct to support behaviour change. PMID:25938455

Flow in Coal Seams: An Unconventional Challenge

NASA Astrophysics Data System (ADS)

Armstrong, R. T.; Mostaghimi, P.; Jing, Y.; Gerami, A.

2016-12-01

A significant unconventional resource for energy is the methane gas stored in shallow coal beds, known as coal seam gas. An integrated imaging and modelling framework is developed for analysing petrophysical behaviour of coals. X-ray micro-computed tomography (micro-CT) is applied using a novel contrast agent method for visualising micrometer-sized fractures in coal. The technique allows for the visualisation of coal features not visible with conventional imaging methods. A Late Permian medium volatile bituminous coal from Moura Coal Mine (Queensland, Australia) is imaged and the resulting three-dimensional coal fracture system is extracted for fluid flow simulations. The results demonstrate a direct relationship between coal lithotype and permeability. Scanning electron microscope and energy dispersive spectrometry (SEM-EDS) together with X-ray diffraction (XRD) methods are used for identifying mineral matters at high resolution. SEM high-resolution images are also used to calibrate the micro-CT images and measure the exact aperture size of fractures. This leads to a more accurate estimation of permeability using micro-CT images. To study the significance of geometry and topology of the fracture system, a fracture reconstruction method based on statistical properties of coal is also developed. The network properties including the frequency, aperture size distribution, length, and spacing of the imaged coal fracture system. This allows for a sensitivity analysis on the effects that coal fracture topology and geometry has on coal petrophysical properties. Furthermore, we generate microfluidic chips based on coal fracture observations. The chip is used for flow experiments to visualise multi-fluid processes and measure recovery of gas. A combined numerical and experimental approach is applied to obtain relative permeability curves for different regions of interest. A number of challenges associated with coal samples are discussed and insights are provided for better understanding of these complex porous media systems.

Defence Reporter. Spring 2012

DTIC Science & Technology

2012-01-01

procedures and techniques for dealing with disruptive events. R0002869D Visualisation Techniques: Communicating Results to Senior Decision-Makers Dstl...understanding and accurate recall of key information. Open-source literature provides evidence that good visualisations aid effective communication...of abstract or complex information. General principles regarding the design of visualisations for use in presentations or reports are provided. Best

Evidence for Effective Uses of Dynamic Visualisations in Science Curriculum Materials

ERIC Educational Resources Information Center

McElhaney, Kevin W.; Chang, Hsin-Yi; Chiu, Jennifer L.; Linn, Marcia C.

2015-01-01

Dynamic visualisations capture aspects of scientific phenomena that are difficult to communicate in static materials and benefit from well-designed scaffolds to succeed in classrooms. We review research to clarify the impacts of dynamic visualisations and to identify instructional scaffolds that mediate their success. We use meta-analysis to…

On the retrieval of crystallographic information from atom probe microscopy data via signal mapping from the detector coordinate space.

PubMed

Wallace, Nathan D; Ceguerra, Anna V; Breen, Andrew J; Ringer, Simon P

2018-06-01

Atom probe tomography is a powerful microscopy technique capable of reconstructing the 3D position and chemical identity of millions of atoms within engineering materials, at the atomic level. Crystallographic information contained within the data is particularly valuable for the purposes of reconstruction calibration and grain boundary analysis. Typically, analysing this data is a manual, time-consuming and error prone process. In many cases, the crystallographic signal is so weak that it is difficult to detect at all. In this study, a new automated signal processing methodology is demonstrated. We use the affine properties of the detector coordinate space, or the 'detector stack', as the basis for our calculations. The methodological framework and the visualisation tools are shown to be superior to the standard method of crystallographic pole visualisation directly from field evaporation images and there is no requirement for iterations between a full real-space initial tomographic reconstruction and the detector stack. The mapping approaches are demonstrated for aluminium, tungsten, magnesium and molybdenum. Implications for reconstruction calibration, accuracy of crystallographic measurements, reliability and repeatability are discussed. Copyright © 2018 Elsevier B.V. All rights reserved.

GNU Data Language (GDL) - a free and open-source implementation of IDL

NASA Astrophysics Data System (ADS)

Arabas, Sylwester; Schellens, Marc; Coulais, Alain; Gales, Joel; Messmer, Peter

2010-05-01

GNU Data Language (GDL) is developed with the aim of providing an open-source drop-in replacement for the ITTVIS's Interactive Data Language (IDL). It is free software developed by an international team of volunteers led by Marc Schellens - the project's founder (a list of contributors is available on the project's website). The development is hosted on SourceForge where GDL continuously ranks in the 99th percentile of most active projects. GDL with its library routines is designed as a tool for numerical data analysis and visualisation. As its proprietary counterparts (IDL and PV-WAVE), GDL is used particularly in geosciences and astronomy. GDL is dynamically-typed, vectorized and has object-oriented programming capabilities. The library routines handle numerical calculations, data visualisation, signal/image processing, interaction with host OS and data input/output. GDL supports several data formats such as netCDF, HDF4, HDF5, GRIB, PNG, TIFF, DICOM, etc. Graphical output is handled by X11, PostScript, SVG or z-buffer terminals, the last one allowing output to be saved in a variety of raster graphics formats. GDL is an incremental compiler with integrated debugging facilities. It is written in C++ using the ANTLR language-recognition framework. Most of the library routines are implemented as interfaces to open-source packages such as GNU Scientific Library, PLPlot, FFTW, ImageMagick, and others. GDL features a Python bridge (Python code can be called from GDL; GDL can be compiled as a Python module). Extensions to GDL can be written in C++, GDL, and Python. A number of open software libraries written in IDL, such as the NASA Astronomy Library, MPFIT, CMSVLIB and TeXtoIDL are fully or partially functional under GDL. Packaged versions of GDL are available for several Linux distributions and Mac OS X. The source code compiles on some other UNIX systems, including BSD and OpenSolaris. The presentation will cover the current status of the project, the key accomplishments, and the weaknesses - areas where contributions and users' feedback are welcome! While still being in beta-stage of development, GDL proved to be a useful tool for classroom work on data analysis. Its usage for teaching meteorological-data processing at the University of Warsaw will serve as an example.

A novel visualisation tool for climate services: a case study of temperature extremes and human mortality in Europe

NASA Astrophysics Data System (ADS)

Lowe, R.; Ballester, J.; Robine, J.; Herrmann, F. R.; Jupp, T. E.; Stephenson, D.; Rodó, X.

2013-12-01

Users of climate information often require probabilistic information on which to base their decisions. However, communicating information contained within a probabilistic forecast presents a challenge. In this paper we demonstrate a novel visualisation technique to display ternary probabilistic forecasts on a map in order to inform decision making. In this method, ternary probabilistic forecasts, which assign probabilities to a set of three outcomes (e.g. low, medium, and high risk), are considered as a point in a triangle of barycentric coordinates. This allows a unique colour to be assigned to each forecast from a continuum of colours defined on the triangle. Colour saturation increases with information gain relative to the reference forecast (i.e. the long term average). This provides additional information to decision makers compared with conventional methods used in seasonal climate forecasting, where one colour is used to represent one forecast category on a forecast map (e.g. red = ';dry'). We use the tool to present climate-related mortality projections across Europe. Temperature and humidity are related to human mortality via location-specific transfer functions, calculated using historical data. Daily mortality data at the NUTS2 level for 16 countries in Europe were obtain from 1998-2005. Transfer functions were calculated for 54 aggregations in Europe, defined using criteria related to population and climatological similarities. Aggregations are restricted to fall within political boundaries to avoid problems related to varying adaptation policies between countries. A statistical model is fit to cold and warm tails to estimate future mortality using forecast temperatures, in a Bayesian probabilistic framework. Using predefined categories of temperature-related mortality risk, we present maps of probabilistic projections for human mortality at seasonal to decadal time scales. We demonstrate the information gained from using this technique compared to more traditional methods to display ternary probabilistic forecasts. This technique allows decision makers to identify areas where the model predicts with certainty area-specific heat waves or cold snaps, in order to effectively target resources to those areas most at risk, for a given season or year. It is hoped that this visualisation tool will facilitate the interpretation of the probabilistic forecasts not only for public health decision makers but also within a multi-sectoral climate service framework.

Interactive Webmap-Based Science Planning for BepiColombo

NASA Astrophysics Data System (ADS)

McAuliffe, J.; Martinez, S.; Ortiz de Landaluce, I.; de la Fuente, S.

2015-10-01

For BepiColombo, ESA's Mission to Mercury, we will build a web-based, map-based interface to the Science Planning System. This interface will allow the mission's science teams to visually define targets for observations and interactively specify what operations will make up the given observation. This will be a radical departure from previous ESA mission planning methods. Such an interface will rely heavily on GIS technologies. This interface will provide footprint coverage of all existing archived data for Mercury, including a set of built-in basemaps. This will allow the science teams to analyse their planned observations and operational constraints with relevant contextual information from their own instrument, other BepiColombo instruments or from previous missions. The interface will allow users to import and export data in commonly used GIS formats, such that it can be visualised together with the latest planning information (e.g. import custom basemaps) or analysed in other GIS software. The interface will work with an object-oriented concept of an observation that will be a key characteristic of the overall BepiColombo scienceplanning concept. Observation templates or classes will be tracked right through the planning-executionprocessing- archiving cycle to the final archived science products. By using an interface that synthesises all relevant available information, the science teams will have a better understanding of the operational environment; it will enhance their ability to plan efficiently minimising or removing manual planning. Interactive 3D visualisation of the planned, scheduled and executed observations, simulation of the viewing conditions and interactive modification of the observation parameters are also being considered.

Teaching and Learning with a Visualiser in the Primary Classroom: Modelling Graph-Making

ERIC Educational Resources Information Center

Mavers, Diane

2009-01-01

This paper examines the technological affordances of the visualiser, and what teachers actually do with it in the primary (elementary) classroom, followed by an investigation into one example of teaching and learning with this whole-class technology. A visualiser is a digital display device. Connected to a data projector, whatever is in view of…

The Role and Potential Dangers of Visualisation When Learning about Sub-Microscopic Explanations in Chemistry Education

ERIC Educational Resources Information Center

Eilks, Ingo; Witteck, Torsten; Pietzner, Verena

2012-01-01

The core of theory-driven chemistry education consists of the constant shift between the different representational domains of chemical thinking: the macroscopic, the sub-microscopic, and the symbolic domains. Because the sub-microscopic domain can neither be seen nor directly visualised, it requires specific forms of visualisation, i.e. pictures…

Drawing, Visualisation and Young Children's Exploration of "Big Ideas"

ERIC Educational Resources Information Center

Brooks, Margaret

2009-01-01

It is in the visualisation of ideas, and the expression or representation of our ideas, that we can bring something more clearly into consciousness. A drawing might be seen as an externalisation of a concept or idea. Drawing has the potential to play a mediating role in the visualisation of ideas and concepts in relation to young children…

a Web-Based Interactive Tool for Multi-Resolution 3d Models of a Maya Archaeological Site

NASA Astrophysics Data System (ADS)

Agugiaro, G.; Remondino, F.; Girardi, G.; von Schwerin, J.; Richards-Rissetto, H.; De Amicis, R.

2011-09-01

Continuous technological advances in surveying, computing and digital-content delivery are strongly contributing to a change in the way Cultural Heritage is "perceived": new tools and methodologies for documentation, reconstruction and research are being created to assist not only scholars, but also to reach more potential users (e.g. students and tourists) willing to access more detailed information about art history and archaeology. 3D computer-simulated models, sometimes set in virtual landscapes, offer for example the chance to explore possible hypothetical reconstructions, while on-line GIS resources can help interactive analyses of relationships and change over space and time. While for some research purposes a traditional 2D approach may suffice, this is not the case for more complex analyses concerning spatial and temporal features of architecture, like for example the relationship of architecture and landscape, visibility studies etc. The project aims therefore at creating a tool, called "QueryArch3D" tool, which enables the web-based visualisation and queries of an interactive, multi-resolution 3D model in the framework of Cultural Heritage. More specifically, a complete Maya archaeological site, located in Copan (Honduras), has been chosen as case study to test and demonstrate the platform's capabilities. Much of the site has been surveyed and modelled at different levels of detail (LoD) and the geometric model has been semantically segmented and integrated with attribute data gathered from several external data sources. The paper describes the characteristics of the research work, along with its implementation issues and the initial results of the developed prototype.

The Saale-Project -A multidisciplinary approach towards sustainable integrative catchment management -

NASA Astrophysics Data System (ADS)

Bongartz, K.; Flügel, W. A.

2003-04-01

In the joint research project “Development of an integrated methodology for the sustainable management of river basins The Saale River Basin example”, coordinated by the Centre of Environmental Research (UFZ), concepts and tools for an integrated management of large river basins are developed and applied for the Saale river basin. The ultimate objective of the project is to contribute to the holistic assessment and benchmarking approaches in water resource planning, as required by the European Water Framework Directive. The study presented here deals (1) with the development of a river basin information and modelling system, (2) with the refinement of a regionalisation approach adapted for integrated basin modelling. The approach combines a user friendly basin disaggregation method preserving the catchment’s physiographic heterogeneity with a process oriented hydrological basin assessment for scale bridging integrated modelling. The well tested regional distribution concept of Response Units (RUs) will be enhanced by landscape metrics and decision support tools for objective, scale independent and problem oriented RU delineation to provide the spatial modelling entities for process oriented and distributed simulation of vertical and lateral hydrological transport processes. On basis of this RUs suitable hydrological modelling approaches will be further developed with strong respect to a more detailed simulation of the lateral surface and subsurface flows as well as the channel flow. This methodical enhancement of the well recognised RU-concept will be applied to the river basin of the Saale (Ac: 23 179 km2) and validated by a nested catchment approach, which allows multi-response-validation and estimation of uncertainties of the modelling results. Integrated modelling of such a complex basin strongly influenced by manifold human activities (reservoirs, agriculture, urban areas and industry) can only be achieved by coupling the various modelling approaches within a well defined model framework system. The latter is interactively linked with a sophisticated geo-relational database (DB) serving all research teams involved in the project. This interactive linkage is a core element comprising an object-oriented, internet-based modelling framework system (MFS) for building interdisciplinary modelling applications and offering different analysis and visualisation tools.

Working research codes into fluid dynamics education: a science gateway approach

NASA Astrophysics Data System (ADS)

Mason, Lachlan; Hetherington, James; O'Reilly, Martin; Yong, May; Jersakova, Radka; Grieve, Stuart; Perez-Suarez, David; Klapaukh, Roman; Craster, Richard V.; Matar, Omar K.

2017-11-01

Research codes are effective for illustrating complex concepts in educational fluid dynamics courses, compared to textbook examples, an interactive three-dimensional visualisation can bring a problem to life! Various barriers, however, prevent the adoption of research codes in teaching: codes are typically created for highly-specific `once-off' calculations and, as such, have no user interface and a steep learning curve. Moreover, a code may require access to high-performance computing resources that are not readily available in the classroom. This project allows academics to rapidly work research codes into their teaching via a minimalist `science gateway' framework. The gateway is a simple, yet flexible, web interface allowing students to construct and run simulations, as well as view and share their output. Behind the scenes, the common operations of job configuration, submission, monitoring and post-processing are customisable at the level of shell scripting. In this talk, we demonstrate the creation of an example teaching gateway connected to the Code BLUE fluid dynamics software. Student simulations can be run via a third-party cloud computing provider or a local high-performance cluster. EPSRC, UK, MEMPHIS program Grant (EP/K003976/1), RAEng Research Chair (OKM).

Immersive 3D geovisualisation in higher education

NASA Astrophysics Data System (ADS)

Philips, Andrea; Walz, Ariane; Bergner, Andreas; Graeff, Thomas; Heistermann, Maik; Kienzler, Sarah; Korup, Oliver; Lipp, Torsten; Schwanghart, Wolfgang; Zeilinger, Gerold

2014-05-01

Through geovisualisation we explore spatial data, we analyse it towards a specific questions, we synthesise results, and we present and communicate them to a specific audience (MacEachren & Kraak 1997). After centuries of paper maps, the means to represent and visualise our physical environment and its abstract qualities have changed dramatically since the 1990s - and accordingly the methods how to use geovisualisation in teaching. Whereas some people might still consider the traditional classroom as ideal setting for teaching and learning geographic relationships and its mapping, we used a 3D CAVE (computer-animated virtual environment) as environment for a problem-oriented learning project called "GEOSimulator". Focussing on this project, we empirically investigated, if such a technological advance like the CAVE make 3D visualisation, including 3D geovisualisation, not only an important tool for businesses (Abulrub et al. 2012) and for the public (Wissen et al. 2008), but also for educational purposes, for which it had hardly been used yet. The 3D CAVE is a three-sided visualisation platform, that allows for immersive and stereoscopic visualisation of observed and simulated spatial data. We examined the benefits of immersive 3D visualisation for geographic research and education and synthesized three fundamental technology-based visual aspects: First, the conception and comprehension of space and location does not need to be generated, but is instantaneously and intuitively present through stereoscopy. Second, optical immersion into virtual reality strengthens this spatial perception which is in particular important for complex 3D geometries. And third, a significant benefit is interactivity, which is enhanced through immersion and allows for multi-discursive and dynamic data exploration and knowledge transfer. Based on our problem-oriented learning project, which concentrates on a case study on flood risk management at the Wilde Weisseritz in Germany, a river that significantly contributed to the hundred-year flooding in Dresden in 2002, we empirically evaluated the usefulness of this immersive 3D technology towards learning success. Results show that immersive 3D geovisualisation have educational and content-related advantages compared to 2D geovisualisations through the mentioned benefits. This innovative way of geovisualisation is thus not only entertaining and motivating for students, but can also be constructive for research studies by, for instance, facilitating the study of complex environments or decision-making processes.

Multinational Experiment 7 Cyber Domain Outcome 3. Cyber Situational Awareness. Limited Objective Experiment Report

DTIC Science & Technology

2013-02-28

situational awareness (some surprise at the value of information received from other sectors). • The visualisation technology provided, significantly...digital text and video communications; streaming information feeds; and infrastructure visualisation - all cell teams were provided identical tools...better understanding cyber of situational awareness. The visualisation technology and experiment environment were a first attempt at trying to represent

The Impact of Active Visualisation of High School Students on the Ability to Memorise Verbal Definitions

ERIC Educational Resources Information Center

Šmajdek, Anamarija; Selan, Jurij

2016-01-01

The era of visual communication influences the cognitive strategies of the individual. Education, too, must adjust to these changes, which raises questions regarding the use of visualisation in teaching. In the present study, we examine the impact of visualisation on the ability of high school students to memorise text. In the theoretical part of…

Developing visualisation software for rehabilitation: investigating the requirements of patients, therapists and the rehabilitation process

PubMed Central

Loudon, David; Macdonald, Alastair S.; Carse, Bruce; Thikey, Heather; Jones, Lucy; Rowe, Philip J.; Uzor, Stephen; Ayoade, Mobolaji; Baillie, Lynne

2012-01-01

This paper describes the ongoing process of the development and evaluation of prototype visualisation software, designed to assist in the understanding and the improvement of appropriate movements during rehabilitation. The process of engaging users throughout the research project is detailed in the paper, including how the design of the visualisation software is being adapted to meet the emerging understanding of the needs of patients and professionals, and of the rehabilitation process. The value of the process for the design of the visualisation software is illustrated with a discussion of the findings of pre-pilot focus groups with stroke survivors and therapists. PMID:23011812

Project Ukko - Design of a climate service visualisation interface for seasonal wind forecasts

NASA Astrophysics Data System (ADS)

Hemment, Drew; Stefaner, Moritz; Makri, Stephann; Buontempo, Carlo; Christel, Isadora; Torralba-Fernandez, Veronica; Gonzalez-Reviriego, Nube; Doblas-Reyes, Francisco; de Matos, Paula; Dykes, Jason

2016-04-01

Project Ukko is a prototype climate service to visually communicate probabilistic seasonal wind forecasts for the energy sector. In Project Ukko, an interactive visualisation enhances the accessibility and readability to the latests advances in seasonal wind speed predictions developed as part of the RESILIENCE prototype of the EUPORIAS (EC FP7) project. Climate services provide made-to-measure climate information, tailored to the specific requirements of different users and industries. In the wind energy sector, understanding of wind conditions in the next few months has high economic value, for instance, for the energy traders. Current energy practices use retrospective climatology, but access to reliable seasonal predictions based in the recent advances in global climate models has potential to improve their resilience to climate variability and change. Despite their potential benefits, a barrier to the development of commercially viable services is the complexity of the probabilistic forecast information, and the challenge of communicating complex and uncertain information to decision makers in industry. Project Ukko consists of an interactive climate service interface for wind energy users to explore probabilistic wind speed predictions for the coming season. This interface enables fast visual detection and exploration of interesting features and regions likely to experience unusual changes in wind speed in the coming months.The aim is not only to support users to better understand the future variability in wind power resources, but also to bridge the gap between practitioners' traditional approach and the advanced prediction systems developed by the climate science community. Project Ukko is presented as a case study of cross-disciplinary collaboration between climate science and design, for the development of climate services that are useful, usable and effective for industry users. The presentation will reflect on the challenge of developing a climate service for industry users in the wind energy sector, the background to this challenge, our approach, and the evaluation of the visualisation interface.

A genome-wide resource for the analysis of protein localisation in Drosophila

PubMed Central

Sarov, Mihail; Barz, Christiane; Jambor, Helena; Hein, Marco Y; Schmied, Christopher; Suchold, Dana; Stender, Bettina; Janosch, Stephan; KJ, Vinay Vikas; Krishnan, RT; Krishnamoorthy, Aishwarya; Ferreira, Irene RS; Ejsmont, Radoslaw K; Finkl, Katja; Hasse, Susanne; Kämpfer, Philipp; Plewka, Nicole; Vinis, Elisabeth; Schloissnig, Siegfried; Knust, Elisabeth; Hartenstein, Volker; Mann, Matthias; Ramaswami, Mani; VijayRaghavan, K; Tomancak, Pavel; Schnorrer, Frank

2016-01-01

The Drosophila genome contains >13000 protein-coding genes, the majority of which remain poorly investigated. Important reasons include the lack of antibodies or reporter constructs to visualise these proteins. Here, we present a genome-wide fosmid library of 10000 GFP-tagged clones, comprising tagged genes and most of their regulatory information. For 880 tagged proteins, we created transgenic lines, and for a total of 207 lines, we assessed protein expression and localisation in ovaries, embryos, pupae or adults by stainings and live imaging approaches. Importantly, we visualised many proteins at endogenous expression levels and found a large fraction of them localising to subcellular compartments. By applying genetic complementation tests, we estimate that about two-thirds of the tagged proteins are functional. Moreover, these tagged proteins enable interaction proteomics from developing pupae and adult flies. Taken together, this resource will boost systematic analysis of protein expression and localisation in various cellular and developmental contexts. DOI: http://dx.doi.org/10.7554/eLife.12068.001 PMID:26896675

Web-based volume slicer for 3D electron-microscopy data from EMDB

PubMed Central

Salavert-Torres, José; Iudin, Andrii; Lagerstedt, Ingvar; Sanz-García, Eduardo; Kleywegt, Gerard J.; Patwardhan, Ardan

2016-01-01

We describe the functionality and design of the Volume slicer – a web-based slice viewer for EMDB entries. This tool uniquely provides the facility to view slices from 3D EM reconstructions along the three orthogonal axes and to rapidly switch between them and navigate through the volume. We have employed multiple rounds of user-experience testing with members of the EM community to ensure that the interface is easy and intuitive to use and the information provided is relevant. The impetus to develop the Volume slicer has been calls from the EM community to provide web-based interactive visualisation of 2D slice data. This would be useful for quick initial checks of the quality of a reconstruction. Again in response to calls from the community, we plan to further develop the Volume slicer into a fully-fledged Volume browser that provides integrated visualisation of EMDB and PDB entries from the molecular to the cellular scale. PMID:26876163

Numerical investigations of shock wave interaction with laminar boundary layer on compressor profile

NASA Astrophysics Data System (ADS)

Piotrowicz, M.; Flaszyński, P.

2016-10-01

The investigation of shockwave boundary layer interaction on suction side of transonic compressor blade is one of main objectives of TFAST project (Transition Location Effect on Shock Wave Boundary Layer Interaction). In order to look more closely into the flow structure on suction side of a profile, a design of generic test section in linear transonic wind tunnel was proposed. The experimental and numerical results of flow structure on a suction side of the compressor profile investigations are presented. The numerical simulations are carried out for EARSM (Explicit Algebraic Reynolds Stress Model) turbulence model with transition model. The result are compared with oil flow visualisation, schlieren pictures, Pressure Sensitive Paint (PSP) and static pressure.

Geobrowser Enhanced Access of Real-Time Antarctic Data

NASA Astrophysics Data System (ADS)

Breen, P.; Judge, D.; Cunningham, N.; Kirsch, P. J.

2007-12-01

A proof of principle project was initiated in the Fall of 2006 to develop a system enabling remote field station and ship borne data, collected in near real-time to be discovered, visualised and acquired through a web accessible framework. The two principal enabling drivers for this system were the recent improvements in communications with remote field stations and ships and the advent of low cost, easily accessible geobrowser technology providing the ability to visualise multiple, sometimes physically disparate datasets within a common interface. Strongly spatial in nature the oceanographic datasets suggested the incorporation of geobrowser (Google Earth) technology into this framework. A number of scientific benefits were identified by the project, these include the overall enhancing of the value of many of the datasets through their real-time contribution to forecasting models, satellite ground truthing and calibration of autonomous instrumentation. Improved efficacy of fieldwork led to rapid discovery of problems and the ability to deal with them promptly. The ability to correct or improve experiment parameters and increase capability of routine collection of high-quality data. In the past it may have been over a year before data arrived back at HQ potentially unusable, definitely unrepeatable and significantly reducing or delaying scientific output. The geobrowser interface provides the platform from which the spatial data is discovered, for example ship tracks and aspects of the physical oceanography such as sea surface temperature can be directly visualized. Importantly, ancillary and auxiliary information and metadata can be linked to the cruise data in a straightforward and accessible manner; scientists in Cambridge using a geobrowser were able to access and visualize cruise data from the Southern ocean 20 minutes after collection.

Using a Visualiser in Primary Science

ERIC Educational Resources Information Center

Nicholson, Danny

2011-01-01

Picture the scene--a child in a class has brought in a fabulous example of a snake skin, a snail, a seed, a fossil or rock and the whole class wants to see it. How does a teacher allow them all to observe it without destroying it or jostling each other? One way to get around this issue is to use a visualiser. A visualiser is essentially a small…

User Interface Requirements for Web-Based Integrated Care Pathways: Evidence from the Evaluation of an Online Care Pathway Investigation Tool.

PubMed

Balatsoukas, Panos; Williams, Richard; Davies, Colin; Ainsworth, John; Buchan, Iain

2015-11-01

Integrated care pathways (ICPs) define a chronological sequence of steps, most commonly diagnostic or treatment, to be followed in providing care for patients. Care pathways help to ensure quality standards are met and to reduce variation in practice. Although research on the computerisation of ICP progresses, there is still little knowledge on what are the requirements for designing user-friendly and usable electronic care pathways, or how users (normally health care professionals) interact with interfaces that support design, analysis and visualisation of ICPs. The purpose of the study reported in this paper was to address this gap by evaluating the usability of a novel web-based tool called COCPIT (Collaborative Online Care Pathway Investigation Tool). COCPIT supports the design, analysis and visualisation of ICPs at the population level. In order to address the aim of this study, an evaluation methodology was designed based on heuristic evaluations and a mixed method usability test. The results showed that modular visualisation and direct manipulation of information related to the design and analysis of ICPs is useful for engaging and stimulating users. However, designers should pay attention to issues related to the visibility of the system status and the match between the system and the real world, especially in relation to the display of statistical information about care pathways and the editing of clinical information within a care pathway. The paper concludes with recommendations for interface design.

ESASky: All the sky you need

NASA Astrophysics Data System (ADS)

De Marchi, Guido; ESASky Team

2018-06-01

ESASky is a discovery portal giving to all astronomers, professional and amateur alike, an easy way to access high-quality scientific data from their computer, tablet, or mobile device. It includes over half a million images, 300,000 spectra, and more than a billion catalogue sources. From gamma rays to radio wavelengths, it allows users to explore the cosmos with data from a dozen space missions from the astronomical archives of ESA, NASA, and JAXA and does not require prior knowledge of any particular mission. ESASky features an all-sky exploration interface, letting users easily zoom in for stars as single targets or as part of a whole galaxy, visualise them and retrieve the relevant data taken in an area of the sky with just a few clicks. Users can easily compare observations of the same source obtained by different space missions at different times and wavelengths. They can also use ESASky to plan future observations with the James Webb Space Telescope, comparing the relevant portion of the sky as observed by Hubble and other missions. We will illustrate the many options to visualise and access astronomical data: interactive footprints for each instrument, tree-maps, filters, and solar-system object trajectories can all be combined and displayed. The most recent version of ESASky, released in February, also includes access to scientific publications, allowing users to visualise on the sky all astronomical objects with associated scientific publications and to link directly back to the papers in the NASA Astrophysics Data System.

Situation Awareness. Report of Break-Out Group 4.

DTIC Science & Technology

2006-10-01

abstraction of the objects and contents, which are displayed and analysed with a visualisation tool. To get a clear picture of the situation around you do...cities, villages etc.). It is possible for other types of information to be visualised /handled similarly for network and data analysis. A good example...interesting feature of a visualisation tool concerning reliability/uncertainty might be the possibility to show/hide uncertain information. This means that

A Comparative Study of the Effects of Using Dynamic Geometry Software and Physical Manipulatives on the Spatial Visualisation Skills of Pre-Service Mathematics Teachers

ERIC Educational Resources Information Center

Baki, Adnan; Kosa, Temel; Guven, Bulent

2011-01-01

The study compared the effects of dynamic geometry software and physical manipulatives on the spatial visualisation skills of first-year pre-service mathematics teachers. A pre- and post-test quasi-experimental design was used. The Purdue Spatial Visualisation Test (PSVT) was used for the pre- and post-test. There were three treatment groups. The…

Visualisation and quantification of intracellular interactions of Neisseria meningitidis and human α-actinin by confocal imaging.

PubMed

Murillo, Isabel; Virji, Mumtaz

2010-10-24

The Opc protein of Neisseria meningitidis (Nm, meningococcus) is a surface-expressed integral outer membrane protein, which can act as an adhesin and an effective invasin for human epithelial and endothelial cells. We have identified endothelial surface-located integrins as major receptors for Opc, a process which requires Opc to first bind to integrin ligands such as vitronectin and via these to the cell-expressed receptors(1). This process leads to bacterial invasion of endothelial cells(2). More recently, we observed an interaction of Opc with a 100 kDa protein found in whole cell lysates of human cells(3). We initially observed this interaction when host cell proteins separated by electrophoresis and blotted on to nitrocellulose were overlaid with Opc-expressing Nm. The interaction was direct and did not involve intermediate molecules. By mass spectrometry, we established the identity of the protein as α-actinin. As no surface expressed α-actinin was found on any of the eight cell lines examined, and as Opc interactions with endothelial cells in the presence of serum lead to bacterial entry into the target cells, we examined the possibility of the two proteins interacting intracellularly. For this, cultured human brain microvascular endothelial cells (HBMECs) were infected with Opc-expressing Nm for extended periods and the locations of internalised bacteria and α-actinin were examined by confocal microscopy. We observed time-dependent increase in colocalisation of Nm with the cytoskeletal protein, which was considerable after an eight hour period of bacterial internalisation. In addition, the use of quantitative imaging software enabled us to obtain a relative measure of the colocalisation of Nm with α-actinin and other cytoskeletal proteins. Here we present a protocol for visualisation and quantification of the colocalisation of the bacterium with intracellular proteins after bacterial entry into human endothelial cells, although the procedure is also applicable to human epithelial cells.

Testing co-evolutionary hypotheses over geological timescales: interactions between Mesozoic non-avian dinosaurs and cycads.

PubMed

Butler, Richard J; Barrett, Paul M; Kenrick, Paul; Penn, Malcolm G

2009-02-01

The significance of co-evolution over ecological timescales is well established, yet it remains unclear to what extent co-evolutionary processes contribute to driving large-scale evolutionary and ecological changes over geological timescales. Some of the most intriguing and pervasive long-term co-evolutionary hypotheses relate to proposed interactions between herbivorous non-avian dinosaurs and Mesozoic plants, including cycads. Dinosaurs have been proposed as key dispersers of cycad seeds during the Mesozoic, and temporal variation in cycad diversity and abundance has been linked to dinosaur faunal changes. Here we assess the evidence for proposed hypotheses of trophic and evolutionary interactions between these two groups using diversity analyses, a new database of Cretaceous dinosaur and plant co-occurrence data, and a geographical information system (GIS) as a visualisation tool. Phylogenetic evidence suggests that the origins of several key biological properties of cycads (e.g. toxins, bright-coloured seeds) likely predated the origin of dinosaurs. Direct evidence of dinosaur-cycad interactions is lacking, but evidence from extant ecosystems suggests that dinosaurs may plausibly have acted as seed dispersers for cycads, although it is likely that other vertebrate groups (e.g. birds, early mammals) also played a role. Although the Late Triassic radiations of dinosaurs and cycads appear to have been approximately contemporaneous, few significant changes in dinosaur faunas coincide with the late Early Cretaceous cycad decline. No significant spatiotemporal associations between particular dinosaur groups and cycads can be identified - GIS visualisation reveals disparities between the spatiotemporal distributions of some dinosaur groups (e.g. sauropodomorphs) and cycads that are inconsistent with co-evolutionary hypotheses. The available data provide no unequivocal support for any of the proposed co-evolutionary interactions between cycads and herbivorous dinosaurs - diffuse co-evolutionary scenarios that are proposed to operate over geological timescales are plausible, but such hypotheses need to be firmly grounded on direct evidence of interaction and may be difficult to support given the patchiness of the fossil record.

Using Discursis to enhance the qualitative analysis of hospital pharmacist-patient interactions.

PubMed

Chevalier, Bernadette A M; Watson, Bernadette M; Barras, Michael A; Cottrell, William N; Angus, Daniel J

2018-01-01

Pharmacist-patient communication during medication counselling has been successfully investigated using Communication Accommodation Theory (CAT). Communication researchers in other healthcare professions have utilised Discursis software as an adjunct to their manual qualitative analysis processes. Discursis provides a visual, chronological representation of communication exchanges and identifies patterns of interactant engagement. The aim of this study was to describe how Discursis software was used to enhance previously conducted qualitative analysis of pharmacist-patient interactions (by visualising pharmacist-patient speech patterns, episodes of engagement, and identifying CAT strategies employed by pharmacists within these episodes). Visual plots from 48 transcribed audio recordings of pharmacist-patient exchanges were generated by Discursis. Representative plots were selected to show moderate-high and low- level speaker engagement. Details of engagement were investigated for pharmacist application of CAT strategies (approximation, interpretability, discourse management, emotional expression, and interpersonal control). Discursis plots allowed for identification of distinct patterns occurring within pharmacist-patient exchanges. Moderate-high pharmacist-patient engagement was characterised by multiple off-diagonal squares while alternating single coloured squares depicted low engagement. Engagement episodes were associated with multiple CAT strategies such as discourse management (open-ended questions). Patterns reflecting pharmacist or patient speaker dominance were dependant on clinical setting. Discursis analysis of pharmacist-patient interactions, a novel application of the technology in health communication, was found to be an effective visualisation tool to pin-point episodes for CAT analysis. Discursis has numerous practical and theoretical applications for future health communication research and training. Researchers can use the software to support qualitative analysis where large data sets can be quickly reviewed to identify key areas for concentrated analysis. Because Discursis plots are easily generated from audio recorded transcripts, they are conducive as teaching tools for both students and practitioners to assess and develop their communication skills.

Earthquake impact on settlements: the role of urban and structural morphology

NASA Astrophysics Data System (ADS)

Bostenaru Dan, M.; Armas, I.

2015-10-01

This study is aimed to create an alternative to the classical GIS representation of the impact of earthquake hazards on urban areas. To accomplish this, the traditional map was revised, so that it can cope with contemporary innovative ways of planning, namely strategic planning. As in the theory of fractals, the building dimension and the urban neighbourhood dimension are addressed as different geographic scales between which lessons for decisions can be learned through regression. The interaction between the two scales is useful when looking for alternatives, for the completion of a GIS analysis, and in choosing the landmarks, which, in the case of hazards, become strategic elements in strategic planning. A methodology to innovate mapping as a digital means for analysing and visualising the impact of hazards is proposed. This method relies on concepts from various geography, urban planning, structural engineering and architecture approaches related to disaster management. The method has been tested at the building scale for the N-S Boulevard in Bucharest, Romania, called Magheru. At the urban scale, an incident database has been created, in which the case study for the building level can be mapped. The paper presented is part of a larger research work, which addresses decision making using the framework shown here. The main value of the paper is in proposing a conceptual framework to deconstruct the map for digital earthquake disaster impact analysis and representation. The originality of the concept consists in the representation of elements at different scales considered to be of different levels of importance in the urban tissue, according to the analysis to be performed on them.

Soft tissue deformation for surgical simulation: a position-based dynamics approach.

PubMed

Camara, Mafalda; Mayer, Erik; Darzi, Ara; Pratt, Philip

2016-06-01

To assist the rehearsal and planning of robot-assisted partial nephrectomy, a real-time simulation platform is presented that allows surgeons to visualise and interact with rapidly constructed patient-specific biomechanical models of the anatomical regions of interest. Coupled to a framework for volumetric deformation, the platform furthermore simulates intracorporeal 2D ultrasound image acquisition, using preoperative imaging as the data source. This not only facilitates the planning of optimal transducer trajectories and viewpoints, but can also act as a validation context for manually operated freehand 3D acquisitions and reconstructions. The simulation platform was implemented within the GPU-accelerated NVIDIA FleX position-based dynamics framework. In order to validate the model and determine material properties and other simulation parameter values, a porcine kidney with embedded fiducial beads was CT-scanned and segmented. Acquisitions for the rest position and three different levels of probe-induced deformation were collected. Optimal values of the cluster stiffness coefficients were determined for a range of different particle radii, where the objective function comprised the mean distance error between real and simulated fiducial positions over the sequence of deformations. The mean fiducial error at each deformation stage was found to be compatible with the level of ultrasound probe calibration error typically observed in clinical practice. Furthermore, the simulation exhibited unconditional stability on account of its use of clustered shape-matching constraints. A novel position-based dynamics implementation of soft tissue deformation has been shown to facilitate several desirable simulation characteristics: real-time performance, unconditional stability, rapid model construction enabling patient-specific behaviour and accuracy with respect to reference CT images.

Improving Flood Risk Maps as a Capacity Building Activity: Fostering Public Participation and Raising Flood Risk Awareness in the German Mulde Region (project RISK MAP)

NASA Astrophysics Data System (ADS)

Luther, J.; Meyer, V.; Kuhlicke, C.; Scheuer, S.; Unnerstall, H.

2012-04-01

The EU Floods Directive requires the establishment of flood risk maps for high risk areas in all EU Member States by 2013. However, if existing at all, the current practice of risk mapping still shows some deficits: Risk maps are often seen as an information tool rather than a communication tool. This means that e.g. important local knowledge is not incorporated and forms a contrast to the understanding of capacity building which calls for engaging individuals in the process of learning and adapting to change and for the establishment of a more interactive public administration that learns equally from its actions and from the feedback it receives. Furthermore, the contents of risk maps often do not match the requirements of the end users, so that risk maps are often designed and visualised in a way which cannot be easily understood by laypersons and/or which is not suitable for the respective needs of public authorities in risk and flood event management. The project RISK MAP aimed at improving flood risk maps as a means to foster public participation and raising flood risk awareness. For achieving this aim, RISK MAP (1) developed rules for appropriate stakeholder participation enabling the incorporation of local knowledge and preferences; (2) improved the content of risk maps by considering different risk criteria through the use of a deliberative multicriteria risk mapping tool; and (3) improved the visualisation of risk maps in order to produce user-friendly risk maps by applying the experimental graphic semiology (EGS) method that uses the eye tracking approach. The research was carried out in five European case studies where the status quo of risk mapping and the legal framework was analysed, several stakeholder interviews and workshops were conducted, the visual perception of risk maps was tested and - based on this empirical work - exemplary improved risk maps were produced. The presentation and paper will outline the main findings of the project which ended in September 2011, focussing on the participatory aspects in one of the German case studies (the Mulde River in Saxony). In short, different map users such as strategic planners, emergency managers or the (affected) public require different maps, with varying information density and complexity. The purpose of participation may therefore have a substantive rationale (i.e. improving the content, including local knowledge) or a more instrumental rationale (i.e. building trust, raising awareness, increasing legitimacy). The degree to which both rationales are accommodated depends on the project objectives and determines the participants and process type. In the Mulde case study, both the process of collaborating with each other and considering the (local) knowledge and different experiences as well as the results were highly appreciated. Hazard and risk maps are thus not an end-product that could be complemented e.g. by emergency management information on existing or planned defences, evacuation routes, assembly points, but they should be embedded into a participatory maintenance/updating framework. Map visualisation could be enhanced by using more common and/or self-explanatory symbols, text and a limited number of colour grades for hazard and risk information. Keywords: Flood mapping, hazard and risk maps, participation, risk communication, flood risk awareness, emergency management

Industrial application of semantic process mining

NASA Astrophysics Data System (ADS)

Espen Ingvaldsen, Jon; Atle Gulla, Jon

2012-05-01

Process mining relates to the extraction of non-trivial and useful information from information system event logs. It is a new research discipline that has evolved significantly since the early work on idealistic process logs. Over the last years, process mining prototypes have incorporated elements from semantics and data mining and targeted visualisation techniques that are more user-friendly to business experts and process owners. In this article, we present a framework for evaluating different aspects of enterprise process flows and address practical challenges of state-of-the-art industrial process mining. We also explore the inherent strengths of the technology for more efficient process optimisation.

Application of the Golden Software Surfer mapping software for automation of visualisation of meteorological and oceanographic data in IMGW Maritime Branch.

NASA Astrophysics Data System (ADS)

Piliczewski, B.

2003-04-01

The Golden Software Surfer has been used in IMGW Maritime Branch for more than ten years. This tool provides ActiveX Automation objects, which allow scripts to control practically every feature of Surfer. These objects can be accessed from any Automation-enabled environment, such as Visual Basic or Excel. Several applications based on Surfer has been developed in IMGW. The first example is an on-line oceanographic service, which presents forecasts of the water temperature, sea level and currents originating from the HIROMB model and is automatically updated every day. Surfer was also utilised in MERMAID, an international project supported by EC under the 5th Framework Programme. The main aim of this project was to create a prototype of the Internet-based data brokerage system, which would enable to search, extract, buy and download datasets containing meteorological or oceanographic data. During the project IMGW developed an online application, called Mermaid Viewer, which enables communication with the data broker and automatic visualisation of the downloaded data using Surfer. Both the above mentioned applications were developed in Visual Basic. Currently it is considered to adopt Surfer for the monitoring service, which provides access to the data collected in the monitoring of the Baltic Sea environment.

EarthServer: Use of Rasdaman as a data store for use in visualisation of complex EO data

NASA Astrophysics Data System (ADS)

Clements, Oliver; Walker, Peter; Grant, Mike

2013-04-01

The European Commission FP7 project EarthServer is establishing open access and ad-hoc analytics on extreme-size Earth Science data, based on and extending cutting-edge Array Database technology. EarthServer is built around the Rasdaman Raster Data Manager which extends standard relational database systems with the ability to store and retrieve multi-dimensional raster data of unlimited size through an SQL style query language. Rasdaman facilitates visualisation of data by providing several Open Geospatial Consortium (OGC) standard interfaces through its web services wrapper, Petascope. These include the well established standards, Web Coverage Service (WCS) and Web Map Service (WMS) as well as the emerging standard, Web Coverage Processing Service (WCPS). The WCPS standard allows the running of ad-hoc queries on the data stored within Rasdaman, creating an infrastructure where users are not restricted by bandwidth when manipulating or querying huge datasets. Here we will show that the use of EarthServer technologies and infrastructure allows access and visualisation of massive scale data through a web client with only marginal bandwidth use as opposed to the current mechanism of copying huge amounts of data to create visualisations locally. For example if a user wanted to generate a plot of global average chlorophyll for a complete decade time series they would only have to download the result instead of Terabytes of data. Firstly we will present a brief overview of the capabilities of Rasdaman and the WCPS query language to introduce the ways in which it is used in a visualisation tool chain. We will show that there are several ways in which WCPS can be utilised to create both standard and novel web based visualisations. An example of a standard visualisation is the production of traditional 2d plots, allowing users the ability to plot data products easily. However, the query language allows the creation of novel/custom products, which can then immediately be plotted with the same system. For more complex multi-spectral data, WCPS allows the user to explore novel combinations of bands in standard band-ratio algorithms through a web browser with dynamic updating of the resultant image. To visualise very large datasets Rasdaman has the capability to dynamically scale a dataset or query result so that it can be appraised quickly for use in later unscaled queries. All of these techniques are accessible through a web based GIS interface increasing the number of potential users of the system. Lastly we will show the advances in dynamic web based 3D visualisations being explored within the EarthServer project. By utilising the emerging declarative 3D web standard X3DOM as a tool to visualise the results of WCPS queries we introduce several possible benefits, including quick appraisal of data for outliers or anomalous data points and visualisation of the uncertainty of data alongside the actual data values.

Mapping patient safety: a large-scale literature review using bibliometric visualisation techniques.

PubMed

Rodrigues, S P; van Eck, N J; Waltman, L; Jansen, F W

2014-03-13

The amount of scientific literature available is often overwhelming, making it difficult for researchers to have a good overview of the literature and to see relations between different developments. Visualisation techniques based on bibliometric data are helpful in obtaining an overview of the literature on complex research topics, and have been applied here to the topic of patient safety (PS). On the basis of title words and citation relations, publications in the period 2000-2010 related to PS were identified in the Scopus bibliographic database. A visualisation of the most frequently cited PS publications was produced based on direct and indirect citation relations between publications. Terms were extracted from titles and abstracts of the publications, and a visualisation of the most important terms was created. The main PS-related topics studied in the literature were identified using a technique for clustering publications and terms. A total of 8480 publications were identified, of which the 1462 most frequently cited ones were included in the visualisation. The publications were clustered into 19 clusters, which were grouped into three categories: (1) magnitude of PS problems (42% of all included publications); (2) PS risk factors (31%) and (3) implementation of solutions (19%). In the visualisation of PS-related terms, five clusters were identified: (1) medication; (2) measuring harm; (3) PS culture; (4) physician; (5) training, education and communication. Both analysis at publication and term level indicate an increasing focus on risk factors. A bibliometric visualisation approach makes it possible to analyse large amounts of literature. This approach is very useful for improving one's understanding of a complex research topic such as PS and for suggesting new research directions or alternative research priorities. For PS research, the approach suggests that more research on implementing PS improvement initiatives might be needed.

Motion-corrected whole-heart PET-MR for the simultaneous visualisation of coronary artery integrity and myocardial viability: an initial clinical validation.

PubMed

Munoz, Camila; Kunze, Karl P; Neji, Radhouene; Vitadello, Teresa; Rischpler, Christoph; Botnar, René M; Nekolla, Stephan G; Prieto, Claudia

2018-05-12

Cardiac PET-MR has shown potential for the comprehensive assessment of coronary heart disease. However, image degradation due to physiological motion remains a challenge that could hinder the adoption of this technology in clinical practice. The purpose of this study was to validate a recently proposed respiratory motion-corrected PET-MR framework for the simultaneous visualisation of myocardial viability ( 18 F-FDG PET) and coronary artery anatomy (coronary MR angiography, CMRA) in patients with chronic total occlusion (CTO). A cohort of 14 patients was scanned with the proposed PET-CMRA framework. PET and CMRA images were reconstructed with and without the proposed motion correction approach for comparison purposes. Metrics of image quality including visible vessel length and sharpness were obtained for CMRA for both the right and left anterior descending coronary arteries (RCA, LAD), and relative increase in 18 F-FDG PET signal after motion correction for standard 17-segment polar maps was computed. Resulting coronary anatomy by CMRA and myocardial integrity by PET were visually compared against X-ray angiography and conventional Late Gadolinium Enhancement (LGE) MRI, respectively. Motion correction increased CMRA visible vessel length by 49.9% and 32.6% (RCA, LAD) and vessel sharpness by 12.3% and 18.9% (RCA, LAD) on average compared to uncorrected images. Coronary lumen delineation on motion-corrected CMRA images was in good agreement with X-ray angiography findings. For PET, motion correction resulted in an average 8% increase in 18 F-FDG signal in the inferior and inferolateral segments of the myocardial wall. An improved delineation of myocardial viability defects and reduced noise in the 18 F-FDG PET images was observed, improving correspondence to subendocardial LGE-MRI findings compared to uncorrected images. The feasibility of the PET-CMRA framework for simultaneous cardiac PET-MR imaging in a short and predictable scan time (~11 min) has been demonstrated in 14 patients with CTO. Motion correction increased visible length and sharpness of the coronary arteries by CMRA, and improved delineation of the myocardium by 18 F-FDG PET, resulting in good agreement with X-ray angiography and LGE-MRI.

Open-Source web-based geographical information system for health exposure assessment

PubMed Central

2012-01-01

This paper presents the design and development of an open source web-based Geographical Information System allowing users to visualise, customise and interact with spatial data within their web browser. The developed application shows that by using solely Open Source software it was possible to develop a customisable web based GIS application that provides functions necessary to convey health and environmental data to experts and non-experts alike without the requirement of proprietary software. PMID:22233606

Visualisation of morphological interaction of diamond and silver nanoparticles with Salmonella Enteritidis and Listeria monocytogenes.

PubMed

Sawosz, Ewa; Chwalibog, André; Mitura, Katarzyna; Mitura, Stanisław; Szeliga, Jacek; Niemiec, Tomasz; Rupiewicz, Marlena; Grodzik, Marta; Sokołowska, Aleksandra

2011-09-01

Currently, medicine intensively searches for methods to transport drugs to a target (sick) point within the body. The objective of the present investigation was to evaluate morphological characteristics of the assembles of silver or diamond nanoparticles with Salmonella Enteritidis (G-) or Listeria monocytogenes (G+), to reveal possibilities of constructing nanoparticle-bacteria vehicles. Diamond nanoparticles (nano-D) were produced by the detonation method. Hydrocolloids of silver nanoparticles (nano-Ag) were produced by electric non-explosive patented method. Hydrocolloids of nanoparticles (200 microl) were added to bacteria suspension (200 microl) in the following order: nano-D + Salmonella E.; nano-D + Listeria monocytogenes; nano-Ag + Salmonella E; nano-Ag + Listeria monocytogenes. Samples were inspected by transmission electron microscopy. Visualisation of nanoparticles and bacteria interaction showed harmful effects of both nanoparticles on bacteria morphology. The most spectacular effect of nano-D were strong links between nano-D packages and the flagella of Salmonella E. Nano-Ag were closely attached to Listeria monocytogenes but not to Salmonella E. There was no evidence of entering nano-Ag inside Listeria monocytogenes but smaller particles were placed inside Salmonella E. The ability of nano-D to attach to the flagella and the ability of nano-Ag to penetrate inside bacteria cells can be utilized to design nano-bacteria vehicles, being carriers for active substances attached to nanoparticles.

Visualising ‘work done’ with a simple flying wheel toy

NASA Astrophysics Data System (ADS)

Amir, Nazir

2018-07-01

A way to scaffold students’ understanding of abstract physics concepts is through fun activities that help in visualisation. This article highlights a simple flying wheel toy can be used as a demonstration kit in presenting the equation ‘Work Done  =  Force  ×  Distance’. The kit has helped the author’s students visualise the equation, getting them to appreciate how components of the equation are related to one another, which otherwise may have been abstract for them.

Bite mark documentation and analysis: the forensic 3D/CAD supported photogrammetry approach.

PubMed

Thali, M J; Braun, M; Markwalder, Th H; Brueschweiler, W; Zollinger, U; Malik, Naseem J; Yen, K; Dirnhofer, R

2003-08-12

Bite mark identification is based on the individuality of a dentition, which is used to match a bite mark to a suspected perpetrator. This matching is based on a tooth-by-tooth and arch-to-arch comparison utilising parameters of size, shape and alignment. The most common method used to analyse bite mark are carried out in 2D space. That means that the 3D information is preserved only two dimensionally with distortions. This paper presents a new 3D documentation, analysis and visualisation approach based on forensic 3D/CAD supported photogrammetry (FPHG) and the use of a 3D surface scanner. Our photogrammetric approach and the used visualisation method is, to the best to our knowledge, the first 3D approach for bite mark analysis in an actual case. The documentation has no distortion artifacts as can be found with standard photography. All the data are documented with a metric 3D measurement, orientation and subsequent analysis in 3D space. Beside the metrical analysis between bite mark and cast, it is possible using our method to utilise the topographical 3D feature of each individual tooth. This means that the 3D features of the biting surfaces and edges of each teeth are respected which is--as shown in our case--very important especially in the front teeth which have the first contact to the skin. Based upon the 3D detailed representation of the cast with the 3D topographic characteristics of the teeth, the interaction with the 3D documented skin can be visualised and analysed on the computer screen.

Intraoperative visualisation of functional structures facilitates safe frameless stereotactic biopsy in the motor eloquent regions of the brain.

PubMed

Zhang, Jia-Shu; Qu, Ling; Wang, Qun; Jin, Wei; Hou, Yuan-Zheng; Sun, Guo-Chen; Li, Fang-Ye; Yu, Xin-Guang; Xu, Ban-Nan; Chen, Xiao-Lei

2017-12-20

For stereotactic brain biopsy involving motor eloquent regions, the surgical objective is to enhance diagnostic yield and preserve neurological function. To achieve this aim, we implemented functional neuro-navigation and intraoperative magnetic resonance imaging (iMRI) into the biopsy procedure. The impact of this integrated technique on the surgical outcome and postoperative neurological function was investigated and evaluated. Thirty nine patients with lesions involving motor eloquent structures underwent frameless stereotactic biopsy assisted by functional neuro-navigation and iMRI. Intraoperative visualisation was realised by integrating anatomical and functional information into a navigation framework to improve biopsy trajectories and preserve eloquent structures. iMRI was conducted to guarantee the biopsy accuracy and detect intraoperative complications. The perioperative change of motor function and biopsy error before and after iMRI were recorded, and the role of functional information in trajectory selection and the relationship between the distance from sampling site to nearby eloquent structures and the neurological deterioration were further analyzed. Functional neuro-navigation helped modify the original trajectories and sampling sites in 35.90% (16/39) of cases to avoid the damage of eloquent structures. Even though all the lesions were high-risk of causing neurological deficits, no significant difference was found between preoperative and postoperative muscle strength. After data analysis, 3mm was supposed to be the safe distance for avoiding transient neurological deterioration. During surgery, the use of iMRI significantly reduced the biopsy errors (p = 0.042) and potentially increased the diagnostic yield from 84.62% (33/39) to 94.87% (37/39). Moreover, iMRI detected intraoperative haemorrhage in 5.13% (2/39) of patients, all of them benefited from the intraoperative strategies based on iMRI findings. Intraoperative visualisation of functional structures could be a feasible, safe and effective technique. Combined with intraoperative high-field MRI, it contributed to enhance the biopsy accuracy and lower neurological complications in stereotactic brain biopsy involving motor eloquent areas.

Exchanging environmental information and decision making: developing the local Pilot Environmental Virtual Observatory with stakeholder communities

NASA Astrophysics Data System (ADS)

Mackay, E.; Beven, K.; Brewer, P.; M, Haygarth, P.; Macklin, M.; Marshall, K.; Quinn, P.; Stutter, M.; Thomas, N.; Wilkinson, M.

2012-04-01

Public participation in the development of flood risk management and river basin management plans are explicit components of both the Water Framework and Floods Directives. At the local level, involving communities in land and water management has been found to (i) aid better environmental decision making, (ii) enhance social, economic and environmental benefits, and (iii) increase a sense of ownership. Facilitating the access and exchange of information on the local environment is an important part of this new approach to the land and water management process, which also includes local community stakeholders in decisions about the design and content of the information provided. As part of the Natural Environment Research Council's pilot Environment Virtual Observatory (EVO), the Local Level group are engaging with local community stakeholders in three different catchments in the UK (the rivers Eden, Tarland and Dyfi) to start the process of developing prototype visualisation tools to address the specific land and water management issues identified in each area. Through this local collaboration, we will provide novel visualisation tools through which to communicate complex catchment science outcomes and bring together different sources of environmental data in ways that better meet end-user needs as well as facilitate a far broader participatory approach in environmental decision making. The Local Landscape Visualisation Tools are being evolved iteratively during the project to reflect the needs, interests and capabilities of a wide range of stakeholders. The tools will use the latest concepts and technologies to communicate with and provide opportunities for the provision and exchange of information between the public, government agencies and scientists. This local toolkit will reside within a wider EVO platform that will include national datasets, models and state of the art cloud computer systems. As such, local stakeholder groups are assisting the EVO's development and participating in local decision making alongside policy makers, government agencies and scientists.

Utilisation of Wearable Computing for Space Programmes Test Activities Optimasation

NASA Astrophysics Data System (ADS)

Basso, V.; Lazzari, D.; Alemanni, M.

2004-08-01

New technologies are assuming a relevant importance in the Space business domain also in the Assembly Integration and Test (AIT) activities allowing process optimization and capability that were unthinkable only few years ago. This paper has the aim to describe Alenia Spazio (ALS) gained experience on the remote interaction techniques as a results of collaborations established both on European Communities (EC) initiatives, with Alenia Aeronautica (ALA) and Politecnico of Torino (POLITO). The H/W and S/W components performances increase and costs reduction due to the home computing massive utilization (especially demanded by the games business) together with the network technology possibility (offered by the web as well as the hi-speed links and the wireless communications) allow today to re-think the traditional AIT process activities in the light of the multimedia data exchange: graphical, voice video and by sure more in the future. Aerospace business confirm its innovation vocation which in the year '80 represents the cradle of the CAD systems and today is oriented to the 3D data visualization/ interaction technologies and remote visualisation/ interaction in collaborative way on a much more user friendly bases (i.e. not for specialists). Fig. 1 collects AIT extended scenario studied and adopted by ALS in these years. ALS experimented two possibilities of remote visualization/interaction: Portable [e.g. Fig.2 Personal Digital Assistant (PDA), Wearable] and walls (e.g.VR-Lab) screens as both 2D/3D visualisation and interaction devices which could support many types of traditional (mainly based on EGSE and PDM/CAD utilisation/reports) company internal AIT applications: 1. design review support 2. facility management 3. storage management 4. personnel training 5. integration sequences definition 6. assembly and test operations follow up 7. documentation review and external access to AIT activities for remote operations (e.g. tele-testing) EGSE Portable Clean room Walls PDM/CAD Tele-operations Product Control room External World

VISIONET: intuitive visualisation of overlapping transcription factor networks, with applications in cardiogenic gene discovery.

PubMed

Nim, Hieu T; Furtado, Milena B; Costa, Mauro W; Rosenthal, Nadia A; Kitano, Hiroaki; Boyd, Sarah E

2015-05-01

Existing de novo software platforms have largely overlooked a valuable resource, the expertise of the intended biologist users. Typical data representations such as long gene lists, or highly dense and overlapping transcription factor networks often hinder biologists from relating these results to their expertise. VISIONET, a streamlined visualisation tool built from experimental needs, enables biologists to transform large and dense overlapping transcription factor networks into sparse human-readable graphs via numerically filtering. The VISIONET interface allows users without a computing background to interactively explore and filter their data, and empowers them to apply their specialist knowledge on far more complex and substantial data sets than is currently possible. Applying VISIONET to the Tbx20-Gata4 transcription factor network led to the discovery and validation of Aldh1a2, an essential developmental gene associated with various important cardiac disorders, as a healthy adult cardiac fibroblast gene co-regulated by cardiogenic transcription factors Gata4 and Tbx20. We demonstrate with experimental validations the utility of VISIONET for expertise-driven gene discovery that opens new experimental directions that would not otherwise have been identified.

Development and first experimental tests of Faraday cup array.

PubMed

Prokůpek, J; Kaufman, J; Margarone, D; Krůs, M; Velyhan, A; Krása, J; Burris-Mog, T; Busold, S; Deppert, O; Cowan, T E; Korn, G

2014-01-01

A new type of Faraday cup, capable of detecting high energy charged particles produced in a high intensity laser-matter interaction environment, has recently been developed and demonstrated as a real-time detector based on the time-of-flight technique. An array of these Faraday cups was designed and constructed to cover different observation angles with respect to the target normal direction. Thus, it allows reconstruction of the spatial distribution of ion current density in the subcritical plasma region and the ability to visualise its time evolution through time-of-flight measurements, which cannot be achieved with standard laser optical interferometry. This is a unique method for two-dimensional visualisation of ion currents from laser-generated plasmas. A technical description of the new type of Faraday cup is introduced along with an ad hoc data analysis procedure. Experimental results obtained during campaigns at the Petawatt High-Energy Laser for Heavy Ion Experiments (GSI, Darmstadt) and at the Prague Asterix Laser System (AS CR) are presented. Advantages and limitations of the used diagnostic system are discussed.

The actin cytoskeleton in whole mount preparations and sections.

PubMed

Resch, Guenter P; Urban, Edit; Jacob, Sonja

2010-01-01

In non-muscle cells, the actin cytoskeleton plays a key role by providing a scaffold contributing to the definition of cell shape, force for driving cell motility, cytokinesis, endocytosis, and propulsion of pathogens, as well as tracks for intracellular transport. A thorough understanding of these processes requires insight into the spatial and temporal organisation of actin filaments into diverse higher-order structures, such as networks, parallel bundles, and contractile arrays. Transmission and scanning electron microscopy can be used to visualise the actin cytoskeleton, but due to the delicate nature of actin filaments, they are easily affected by standard preparation protocols, yielding variable degrees of ultrastructural preservation. In this chapter, we describe different conventional and cryo-approaches to visualise the actin cytoskeleton using transmission electron microscopy and discuss their specific advantages and drawbacks. In the first part, we present three different whole mount techniques, which allow visualisation of actin in the peripheral, thinly spread parts of cells grown in monolayers. In the second part, we describe specific issues concerning the visualisation of actin in thin sections. Techniques for three-dimensional visualisation of actin, protein localisation, and correlative light and electron microscopy are also included. Copyright © 2010 Elsevier Inc. All rights reserved.

Developing students' functional thinking in algebra through different visualisations of a growing pattern's structure

NASA Astrophysics Data System (ADS)

Wilkie, Karina J.; Clarke, Doug M.

2016-06-01

Spatial visualisation of geometric patterns and their generalisation have become a recognised pathway to developing students' functional thinking and understanding of variables in algebra. This design-based research project investigated upper primary students' development of explicit generalisation of functional relationships and their representation descriptively, graphically and symbolically. Ten teachers and their classes were involved in a sequence of tasks involving growing patterns and geometric structures over 1 year. This article focuses on two aspects of the study: visualising the structure of a geometric pattern in different ways and using this to generalise the functional relationship between two quantifiable aspects (variables). It was found that in an initial assessment task ( n = 222), students' initial visualisations could be categorised according to different types and some of these were more likely to lead either to recursive or explicit generalisation. In a later task, a small number of students demonstrated the ability to find more than one way to visualise the same geometric structure and thus represent their explicit generalisations as different but equivalent symbolic equations (using pronumerals). Implications for the teaching of functional thinking in middle-school algebra are discussed.

Status of GDL - GNU Data Language

NASA Astrophysics Data System (ADS)

Coulais, A.; Schellens, M.; Gales, J.; Arabas, S.; Boquien, M.; Chanial, P.; Messmer, P.; Fillmore, D.; Poplawski, O.; Maret, S.; Marchal, G.; Galmiche, N.; Mermet, T.

2010-12-01

Gnu Data Language (GDL) is an open-source interpreted language aimed at numerical data analysis and visualisation. It is a free implementation of the Interactive Data Language (IDL) widely used in Astronomy. GDL has a full syntax compatibility with IDL, and includes a large set of library routines targeting advanced matrix manipulation, plotting, time-series and image analysis, mapping, and data input/output including numerous scientific data formats. We will present the current status of the project, the key accomplishments, and the weaknesses - areas where contributions are welcome!

Multimedia Visualisation of Massive Military Datasets (Visualisation multimedia des jeux de donnees militaires massifs)

DTIC Science & Technology

2007-06-01

the Los Angeles Area A-16 Figure A-5 Illustration of the Life Cycle of the Japanese Beetle A-17 Figure B-1 Knowledge Wall B-8 Figure B-2...Structure of World Trade in 1992 C-15 Figure D-1 3D Panorama Cinema at CAVI in Use D-2 Figure D-2 Holobench at CAVI D-2 Figure D-3 Virtual Studio...Illustration of the Life Cycle of the Japanese Beetle. A.6 STEPS IN ESTABLISHING A THEORY OF EFFECTIVE VISUALISATION An established theory generally

Mapping patient safety: a large-scale literature review using bibliometric visualisation techniques

PubMed Central

Rodrigues, S P; van Eck, N J; Waltman, L; Jansen, F W

2014-01-01

Background The amount of scientific literature available is often overwhelming, making it difficult for researchers to have a good overview of the literature and to see relations between different developments. Visualisation techniques based on bibliometric data are helpful in obtaining an overview of the literature on complex research topics, and have been applied here to the topic of patient safety (PS). Methods On the basis of title words and citation relations, publications in the period 2000–2010 related to PS were identified in the Scopus bibliographic database. A visualisation of the most frequently cited PS publications was produced based on direct and indirect citation relations between publications. Terms were extracted from titles and abstracts of the publications, and a visualisation of the most important terms was created. The main PS-related topics studied in the literature were identified using a technique for clustering publications and terms. Results A total of 8480 publications were identified, of which the 1462 most frequently cited ones were included in the visualisation. The publications were clustered into 19 clusters, which were grouped into three categories: (1) magnitude of PS problems (42% of all included publications); (2) PS risk factors (31%) and (3) implementation of solutions (19%). In the visualisation of PS-related terms, five clusters were identified: (1) medication; (2) measuring harm; (3) PS culture; (4) physician; (5) training, education and communication. Both analysis at publication and term level indicate an increasing focus on risk factors. Conclusions A bibliometric visualisation approach makes it possible to analyse large amounts of literature. This approach is very useful for improving one's understanding of a complex research topic such as PS and for suggesting new research directions or alternative research priorities. For PS research, the approach suggests that more research on implementing PS improvement initiatives might be needed. PMID:24625640

Visual privacy by context: proposal and evaluation of a level-based visualisation scheme.

PubMed

Padilla-López, José Ramón; Chaaraoui, Alexandros Andre; Gu, Feng; Flórez-Revuelta, Francisco

2015-06-04

Privacy in image and video data has become an important subject since cameras are being installed in an increasing number of public and private spaces. Specifically, in assisted living, intelligent monitoring based on computer vision can allow one to provide risk detection and support services that increase people's autonomy at home. In the present work, a level-based visualisation scheme is proposed to provide visual privacy when human intervention is necessary, such as at telerehabilitation and safety assessment applications. Visualisation levels are dynamically selected based on the previously modelled context. In this way, different levels of protection can be provided, maintaining the necessary intelligibility required for the applications. Furthermore, a case study of a living room, where a top-view camera is installed, is presented. Finally, the performed survey-based evaluation indicates the degree of protection provided by the different visualisation models, as well as the personal privacy preferences and valuations of the users.

Online Meta-data Collection and Monitoring Framework for the STAR Experiment at RHIC

NASA Astrophysics Data System (ADS)

Arkhipkin, D.; Lauret, J.; Betts, W.; Van Buren, G.

2012-12-01

The STAR Experiment further exploits scalable message-oriented model principles to achieve a high level of control over online data streams. In this paper we present an AMQP-powered Message Interface and Reliable Architecture framework (MIRA), which allows STAR to orchestrate the activities of Meta-data Collection, Monitoring, Online QA and several Run-Time and Data Acquisition system components in a very efficient manner. The very nature of the reliable message bus suggests parallel usage of multiple independent storage mechanisms for our meta-data. We describe our experience with a robust data-taking setup employing MySQL- and HyperTable-based archivers for meta-data processing. In addition, MIRA has an AJAX-enabled web GUI, which allows real-time visualisation of online process flow and detector subsystem states, and doubles as a sophisticated alarm system when combined with complex event processing engines like Esper, Borealis or Cayuga. The performance data and our planned path forward are based on our experience during the 2011-2012 running of STAR.

HERAFitter: Open source QCD fit project

DOE PAGES

Alekhin, S.; Behnke, O.; Belov, P.; ...

2015-07-01

HERAFitter is an open-source package that provides a framework for the determination of the parton distribution functions (PDFs) of the proton and for many different kinds of analyses in Quantum Chromodynamics (QCD). It encodes results from a wide range of experimental measurements in lepton-proton deep inelastic scattering and proton-proton (proton-antiproton) collisions at hadron colliders. These are complemented with a variety of theoretical options for calculating PDF-dependent cross section predictions corresponding to the measurements. The framework covers a large number of the existing methods and schemes used for PDF determination. The data and theoretical predictions are brought together through numerous methodologicalmore » options for carrying out PDF fits and plotting tools to help visualise the results. While primarily based on the approach of collinear factorisation, HERAFitter also provides facilities for fits of dipole models and transverse-momentum dependent PDFs. The package can be used to study the impact of new precise measurements from hadron colliders. This paper describes the general structure of HERAFitter and its wide choice of options.« less

Chemically Aware Model Builder (camb): an R package for property and bioactivity modelling of small molecules.

PubMed

Murrell, Daniel S; Cortes-Ciriano, Isidro; van Westen, Gerard J P; Stott, Ian P; Bender, Andreas; Malliavin, Thérèse E; Glen, Robert C

2015-01-01

In silico predictive models have proved to be valuable for the optimisation of compound potency, selectivity and safety profiles in the drug discovery process. camb is an R package that provides an environment for the rapid generation of quantitative Structure-Property and Structure-Activity models for small molecules (including QSAR, QSPR, QSAM, PCM) and is aimed at both advanced and beginner R users. camb's capabilities include the standardisation of chemical structure representation, computation of 905 one-dimensional and 14 fingerprint type descriptors for small molecules, 8 types of amino acid descriptors, 13 whole protein sequence descriptors, filtering methods for feature selection, generation of predictive models (using an interface to the R package caret), as well as techniques to create model ensembles using techniques from the R package caretEnsemble). Results can be visualised through high-quality, customisable plots (R package ggplot2). Overall, camb constitutes an open-source framework to perform the following steps: (1) compound standardisation, (2) molecular and protein descriptor calculation, (3) descriptor pre-processing and model training, visualisation and validation, and (4) bioactivity/property prediction for new molecules. camb aims to speed model generation, in order to provide reproducibility and tests of robustness. QSPR and proteochemometric case studies are included which demonstrate camb's application.Graphical abstractFrom compounds and data to models: a complete model building workflow in one package.

Three-dimensional visualisation of the internal anatomy of the sparrowhawk (Accipiter nisus) forelimb using contrast-enhanced micro-computed tomography.

PubMed

Bribiesca-Contreras, Fernanda; Sellers, William I

2017-01-01

Gross dissection is a widespread method for studying animal anatomy, despite being highly destructive and time-consuming. X-ray computed tomography (CT) has been shown to be a non-destructive alternative for studying anatomical structures. However, in the past it has been limited to only being able to visualise mineralised tissues. In recent years, morphologists have started to use traditional X-ray contrast agents to allow the visualisation of soft tissue elements in the CT context. The aim of this project is to assess the ability of contrast-enhanced micro-CT (μCT) to construct a three-dimensional (3D) model of the musculoskeletal system of the bird wing and to quantify muscle geometry and any systematic changes due to shrinkage. We expect that this reconstruction can be used as an anatomical guide to the sparrowhawk wing musculature and form the basis of further biomechanical analysis of flight. A 3% iodine-buffered formalin solution with a 25-day staining period was used to visualise the wing myology of the sparrowhawk ( Accipiter nisus ). μCT scans of the wing were taken over the staining period until full penetration of the forelimb musculature by iodine was reached. A 3D model was reconstructed by manually segmenting out the individual elements of the avian wing using 3D visualisation software. Different patterns of contrast were observed over the duration of the staining treatment with the best results occurring after 25 days of staining. Staining made it possible to visualise and identify different elements of the soft tissue of the wing. Finally, a 3D reconstruction of the musculoskeletal system of the sparrowhawk wing is presented and numerical data of muscle geometry is compared to values obtained by dissection. Contrast-enhanced μCT allows the visualisation and identification of the wing myology of birds, including the smaller muscles in the hand, and provides a non-destructive way for quantifying muscle volume with an accuracy of 96.2%. By combining contrast-enhanced μCT with 3D visualisation techniques, it is possible to study the individual muscles of the forelimb in their original position and 3D design, which can be the basis of further biomechanical analysis. Because the stain can be washed out post analysis, this technique provides a means of obtaining quantitative muscle data from museum specimens non-destructively.

Distributed volume rendering and stereoscopic display for radiotherapy treatment planning

NASA Astrophysics Data System (ADS)

Hancock, David J.

The thesis describes attempts to use direct volume rendering techniques to produce visualisations useful in the preparation of radiotherapy treatment plans. The selected algorithms allow the generation of data-rich images which can be used to assist the radiologist in comprehending complicated three-dimensional phenomena. The treatment plans are formulated using a three dimensional model which combines patient data acquired from CT scanning and the results of a simulation of the radiation delivery. Multiple intersecting beams with shaped profiles are used and the region of intersection is designed to closely match the position and shape of the targeted tumour region. The proposed treatment must be evaluated as to how well the target region is enveloped by the high dose occurring where the beams intersect, and also as to whether the treatment is likely to expose non-tumour regions to unacceptably high levels of radiation. Conventionally the plans are reviewed by examining CT images overlaid with contours indicating dose levels. Volume visualisation offers a possible saving in time by presenting the data in three dimensional form thereby removing the need to examine a set of slices. The most difficult aspect is to depict unambiguously the relationships between the different data. For example, if a particular beam configuration results in unintended irradiation of a sensitive organ, then it is essential to ensure that this is clearly displayed, and that the 3D relationships between the beams and other data can be readily perceived in order to decide how to correct the problem. The user interface has been designed to present a unified view of the different techniques available for identifying features of interest within the data. The system differs from those previously reported in that complex visualisations can be constructed incrementally, and several different combinations of features can be viewed simultaneously. To maximise the quantity of relevant data presented in a single view, large regions of the data are rendered very transparently. This is done to ensure that interesting features buried deep within the data are visible from any viewpoint. Rendering images with high degrees of transparency raises a number of problems, primarily the drop in quality of depth cues in the image, but also the increase in computational requirements over surface-based visualisations. One solution to the increase in image generation times is the use of parallel architectures, which are an attractive platform for large visualisation tasks such as this. A parallel implementation of the direct volume rendering algorithm is described and its performance is evaluated. Several issues must be addressed in implementing an interactive rendering system in a distributed computing environment: principally overcoming the latency and limited bandwidth of the typical network connection. This thesis reports a pipelining strategy developed to improve the level of interactivity in such situations. Stereoscopic image presentation offers a method to offset the reduction in clarity of the depth information in the transparent images. The results of an investigation into the effectiveness of stereoscopic display as an aid to perception in highly transparent images are presented. Subjects were shown scenes of a synthetic test data set in which conventional depth cues were very limited. The experiments were designed to discover what effect stereoscopic viewing of the transparent, volume rendered images had on user's depth perception.

Developmental morphology of cover crop species exhibit contrasting behaviour to changes in soil bulk density, revealed by X-ray computed tomography

PubMed Central

Burr-Hersey, Jasmine E.; Mooney, Sacha J.; Bengough, A. Glyn; Mairhofer, Stefan

2017-01-01

Plant roots growing through soil typically encounter considerable structural heterogeneity, and local variations in soil dry bulk density. The way the in situ architecture of root systems of different species respond to such heterogeneity is poorly understood due to challenges in visualising roots growing in soil. The objective of this study was to visualise and quantify the impact of abrupt changes in soil bulk density on the roots of three cover crop species with contrasting inherent root morphologies, viz. tillage radish (Raphanus sativus), vetch (Vicia sativa) and black oat (Avena strigosa). The species were grown in soil columns containing a two-layer compaction treatment featuring a 1.2 g cm-3 (uncompacted) zone overlaying a 1.4 g cm-3 (compacted) zone. Three-dimensional visualisations of the root architecture were generated via X-ray computed tomography, and an automated root-segmentation imaging algorithm. Three classes of behaviour were manifest as a result of roots encountering the compacted interface, directly related to the species. For radish, there was switch from a single tap-root to multiple perpendicular roots which penetrated the compacted zone, whilst for vetch primary roots were diverted more horizontally with limited lateral growth at less acute angles. Black oat roots penetrated the compacted zone with no apparent deviation. Smaller root volume, surface area and lateral growth were consistently observed in the compacted zone in comparison to the uncompacted zone across all species. The rapid transition in soil bulk density had a large effect on root morphology that differed greatly between species, with major implications for how these cover crops will modify and interact with soil structure. PMID:28753645

Developmental morphology of cover crop species exhibit contrasting behaviour to changes in soil bulk density, revealed by X-ray computed tomography.

PubMed

Burr-Hersey, Jasmine E; Mooney, Sacha J; Bengough, A Glyn; Mairhofer, Stefan; Ritz, Karl

2017-01-01

Plant roots growing through soil typically encounter considerable structural heterogeneity, and local variations in soil dry bulk density. The way the in situ architecture of root systems of different species respond to such heterogeneity is poorly understood due to challenges in visualising roots growing in soil. The objective of this study was to visualise and quantify the impact of abrupt changes in soil bulk density on the roots of three cover crop species with contrasting inherent root morphologies, viz. tillage radish (Raphanus sativus), vetch (Vicia sativa) and black oat (Avena strigosa). The species were grown in soil columns containing a two-layer compaction treatment featuring a 1.2 g cm-3 (uncompacted) zone overlaying a 1.4 g cm-3 (compacted) zone. Three-dimensional visualisations of the root architecture were generated via X-ray computed tomography, and an automated root-segmentation imaging algorithm. Three classes of behaviour were manifest as a result of roots encountering the compacted interface, directly related to the species. For radish, there was switch from a single tap-root to multiple perpendicular roots which penetrated the compacted zone, whilst for vetch primary roots were diverted more horizontally with limited lateral growth at less acute angles. Black oat roots penetrated the compacted zone with no apparent deviation. Smaller root volume, surface area and lateral growth were consistently observed in the compacted zone in comparison to the uncompacted zone across all species. The rapid transition in soil bulk density had a large effect on root morphology that differed greatly between species, with major implications for how these cover crops will modify and interact with soil structure.

The DX cookbook

NASA Astrophysics Data System (ADS)

Davenhall, A. C.

IBM DX (Data Explorer) is the data-visualisation package recommended by Starlink, particularly for the visualisation of three-dimensional scalar and vector data. This cookbook provides a set of simple recipes for performing common operations using DX. No prior knowledge of DX is required. You can use the recipes as they are provided, if they are suitable for your purposes, or alternatively you can use them as a starting point for generating your own visualisations. The cookbook also contains a brief summary of the DX data model. It is useful to have at least some understanding of this data model in order to use DX effectively.

Using Cesium for 3D Thematic Visualisations on the Web

NASA Astrophysics Data System (ADS)

Gede, Mátyás

2018-05-01

Cesium (http://cesiumjs.org) is an open source, WebGL-based JavaScript library for virtual globes and 3D maps. It is an excellent tool for 3D thematic visualisations, but to use its full functionality it has to be feed with its own file format, CZML. Unfortunately, this format is not yet supported by any major GIS software. This paper intro- duces a plugin for QGIS, developed by the author, which facilitates the creation of CZML file for various types of visualisations. The usability of Cesium is also examined in various hardware/software environments.

Molecular imaging of prostate cancer: translating molecular biology approaches into the clinical realm.

PubMed

Vargas, Hebert Alberto; Grimm, Jan; F Donati, Olivio; Sala, Evis; Hricak, Hedvig

2015-05-01

The epidemiology of prostate cancer has dramatically changed since the introduction of prostate-specific antigen (PSA) screening in the 1980's. Most prostate cancers today are detected at early stages of the disease and are considered 'indolent'; however, some patients' prostate cancers demonstrate a more aggressive behaviour which leads to rapid progression and death. Increasing understanding of the biology underlying the heterogeneity that characterises this disease has led to a continuously evolving role of imaging in the management of prostate cancer. Functional and metabolic imaging techniques are gaining importance as the impact on the therapeutic paradigm has shifted from structural tumour detection alone to distinguishing patients with indolent tumours that can be managed conservatively (e.g., by active surveillance) from patients with more aggressive tumours that may require definitive treatment with surgery or radiation. In this review, we discuss advanced imaging techniques that allow direct visualisation of molecular interactions relevant to prostate cancer and their potential for translation to the clinical setting in the near future. The potential use of imaging to follow molecular events during drug therapy as well as the use of imaging agents for therapeutic purposes will also be discussed. • Advanced imaging techniques allow direct visualisation of molecular interactions in prostate cancer. • MRI/PET, optical and Cerenkov imaging facilitate the translation of molecular biology. • Multiple compounds targeting PSMA expression are currently undergoing clinical translation. • Other targets (e.g., PSA, prostate-stem cell antigen, GRPR) are in development.

BioSAVE: display of scored annotation within a sequence context.

PubMed

Pollock, Richard F; Adryan, Boris

2008-03-20

Visualization of sequence annotation is a common feature in many bioinformatics tools. For many applications it is desirable to restrict the display of such annotation according to a score cutoff, as biological interpretation can be difficult in the presence of the entire data. Unfortunately, many visualisation solutions are somewhat static in the way they handle such score cutoffs. We present BioSAVE, a sequence annotation viewer with on-the-fly selection of visualisation thresholds for each feature. BioSAVE is a versatile OS X program for visual display of scored features (annotation) within a sequence context. The program reads sequence and additional supplementary annotation data (e.g., position weight matrix matches, conservation scores, structural domains) from a variety of commonly used file formats and displays them graphically. Onscreen controls then allow for live customisation of these graphics, including on-the-fly selection of visualisation thresholds for each feature. Possible applications of the program include display of transcription factor binding sites in a genomic context or the visualisation of structural domain assignments in protein sequences and many more. The dynamic visualisation of these annotations is useful, e.g., for the determination of cutoff values of predicted features to match experimental data. Program, source code and exemplary files are freely available at the BioSAVE homepage.

BioSAVE: Display of scored annotation within a sequence context

PubMed Central

Pollock, Richard F; Adryan, Boris

2008-01-01

Background Visualization of sequence annotation is a common feature in many bioinformatics tools. For many applications it is desirable to restrict the display of such annotation according to a score cutoff, as biological interpretation can be difficult in the presence of the entire data. Unfortunately, many visualisation solutions are somewhat static in the way they handle such score cutoffs. Results We present BioSAVE, a sequence annotation viewer with on-the-fly selection of visualisation thresholds for each feature. BioSAVE is a versatile OS X program for visual display of scored features (annotation) within a sequence context. The program reads sequence and additional supplementary annotation data (e.g., position weight matrix matches, conservation scores, structural domains) from a variety of commonly used file formats and displays them graphically. Onscreen controls then allow for live customisation of these graphics, including on-the-fly selection of visualisation thresholds for each feature. Conclusion Possible applications of the program include display of transcription factor binding sites in a genomic context or the visualisation of structural domain assignments in protein sequences and many more. The dynamic visualisation of these annotations is useful, e.g., for the determination of cutoff values of predicted features to match experimental data. Program, source code and exemplary files are freely available at the BioSAVE homepage. PMID:18366701

Using Discursis to enhance the qualitative analysis of hospital pharmacist-patient interactions

PubMed Central

Barras, Michael A.; Angus, Daniel J.

2018-01-01

Introduction Pharmacist-patient communication during medication counselling has been successfully investigated using Communication Accommodation Theory (CAT). Communication researchers in other healthcare professions have utilised Discursis software as an adjunct to their manual qualitative analysis processes. Discursis provides a visual, chronological representation of communication exchanges and identifies patterns of interactant engagement. Aim The aim of this study was to describe how Discursis software was used to enhance previously conducted qualitative analysis of pharmacist-patient interactions (by visualising pharmacist-patient speech patterns, episodes of engagement, and identifying CAT strategies employed by pharmacists within these episodes). Methods Visual plots from 48 transcribed audio recordings of pharmacist-patient exchanges were generated by Discursis. Representative plots were selected to show moderate-high and low- level speaker engagement. Details of engagement were investigated for pharmacist application of CAT strategies (approximation, interpretability, discourse management, emotional expression, and interpersonal control). Results Discursis plots allowed for identification of distinct patterns occurring within pharmacist-patient exchanges. Moderate-high pharmacist-patient engagement was characterised by multiple off-diagonal squares while alternating single coloured squares depicted low engagement. Engagement episodes were associated with multiple CAT strategies such as discourse management (open-ended questions). Patterns reflecting pharmacist or patient speaker dominance were dependant on clinical setting. Discussion and conclusions Discursis analysis of pharmacist-patient interactions, a novel application of the technology in health communication, was found to be an effective visualisation tool to pin-point episodes for CAT analysis. Discursis has numerous practical and theoretical applications for future health communication research and training. Researchers can use the software to support qualitative analysis where large data sets can be quickly reviewed to identify key areas for concentrated analysis. Because Discursis plots are easily generated from audio recorded transcripts, they are conducive as teaching tools for both students and practitioners to assess and develop their communication skills. PMID:29787568

Validation of ultrasound imaging for Achilles entheseal fibrocartilage in bovines and description of changes in humans with spondyloarthritis.

PubMed

Aydin, Sibel Zehra; Bas, Emine; Basci, Onur; Filippucci, Emilio; Wakefield, Richard J; Celikel, Cigdem; Karahan, Mustafa; Atagunduz, Pamir; Benjamin, Mike; Direskeneli, Haner; McGonagle, Dennis

2010-12-01

Entheseal fibrocartilage (EF) derangement is hypothesised to be pivotal to the pathogenesis of spondyloarthritis. Ultrasound is useful for visualisation of the enthesis but its role in EF visualisation is uncertain. This work aimed to demonstrate face and content validity of ultrasound for EF visualisation both by bovine histological evaluation and EF imaging in spondyloarthritis. Achilles enthesis of 18 bovine hindfeet was visualised using a MyLab 70 ultrasound machine. The presence of tissue with EF characteristics was documented and histological confirmation was performed on five randomly selected sections using Masson trichrome staining. Ultrasound of the Achilles tendon (AT) was performed in 19 patients with spondyloarthritis and 21 healthy controls (HC). The bovine EF could be visualised in all cases and seen as a thin, uncompressible, well-defined, anechoic layer between the hyperechoic bone and the hyperechoic fibrils of the enthesis both in longitudinal and transverse scans. This region corresponded to EF on histological examination. The same pattern of low signal corresponding to EF location was seen in 17/19 patients and all HC. Discontinuities of the anechoic layer around the erosions and enthesophytes were observed in the spondyloarthritis group. The thickness of the anechoic layer was not significantly different in spondyloarthritis and HC (0.5 ± 0.1 vs 0.5 ± 0.2 mm, p=0.9) whereas the thickness of the EF was greater in men (0.6 ± 0.2 vs 0.5 ± 0.1 mm; p=0.009) compared with women. Ultrasound can visualise EF of the AT insertion, which can be abnormal in cases of spondyloarthritis. This has implications for a better understanding of enthesopathy.

Visual Privacy by Context: Proposal and Evaluation of a Level-Based Visualisation Scheme

PubMed Central

Padilla-López, José Ramón; Chaaraoui, Alexandros Andre; Gu, Feng; Flórez-Revuelta, Francisco

2015-01-01

Privacy in image and video data has become an important subject since cameras are being installed in an increasing number of public and private spaces. Specifically, in assisted living, intelligent monitoring based on computer vision can allow one to provide risk detection and support services that increase people's autonomy at home. In the present work, a level-based visualisation scheme is proposed to provide visual privacy when human intervention is necessary, such as at telerehabilitation and safety assessment applications. Visualisation levels are dynamically selected based on the previously modelled context. In this way, different levels of protection can be provided, maintaining the necessary intelligibility required for the applications. Furthermore, a case study of a living room, where a top-view camera is installed, is presented. Finally, the performed survey-based evaluation indicates the degree of protection provided by the different visualisation models, as well as the personal privacy preferences and valuations of the users. PMID:26053746

Radiation safety education reduces the incidence of adult fingers on neonatal chest radiographs.

PubMed

Sahota, N; Burbridge, B E; Duncan, M D

2014-06-01

A previous audit revealed a high frequency of adult fingers visualised on neonatal intensive care unit (NICU) chest radiographs-representing an example of inappropriate occupational radiation exposure. Radiation safety education was provided to staff and we hypothesised that the education would reduce the frequency of adult fingers visualised on NICU chest radiographs. Two cross-sectional samples taken before and after the administration of the education were compared. We examined fingers visualised directly in the beam, fingers in the direct beam but eliminated by technologists editing the image, and fingers under the cones of the portable x-ray machine. There was a 46.2% reduction in fingers directly in the beam, 50.0% reduction in fingers directly in the beam but cropped out, and 68.4% reduction in fingers in the coned area. There was a 57.1% overall reduction in adult fingers visualised, which was statistically significant (Z value - 7.48, P < 0.0001). This study supports radiation safety education in minimising inappropriate occupational radiation exposure.

The effects of computer-aided design software on engineering students' spatial visualisation skills

NASA Astrophysics Data System (ADS)

Kösa, Temel; Karakuş, Fatih

2018-03-01

The purpose of this study was to determine the influence of computer-aided design (CAD) software-based instruction on the spatial visualisation skills of freshman engineering students in a computer-aided engineering drawing course. A quasi-experimental design was applied, using the Purdue Spatial Visualization Test-Visualization of Rotations (PSVT:R) for both the pre- and the post-test. The participants were 116 freshman students in the first year of their undergraduate programme in the Department of Mechanical Engineering at a university in Turkey. A total of 72 students comprised the experimental group; they were instructed with CAD-based activities in an engineering drawing course. The control group consisted of 44 students who did not attend this course. The results of the study showed that a CAD-based engineering drawing course had a positive effect on developing engineering students' spatial visualisation skills. Additionally, the results of the study showed that spatial visualisation skills can be a predictor for success in a computer-aided engineering drawing course.

Embedding Knowledge in 3D Data Frameworks in Cultural Heritage

NASA Astrophysics Data System (ADS)

Coughenour, C. M.; Vincent, M. L.; de Kramer, M.; Senecal, S.; Fritsch, D.; Flores Gutirrez, M.; Lopez-Menchero Bendicho, V. M.; Ioannides, M.

2015-08-01

At present, where 3D modeling and visualisation in cultural heritage are concerned, an object's documentation lacks its interconnected memory provided by multidisciplinary examination and linked data. As the layers of paint, wood, and brick recount a structure's physical properties, the intangible, such as the forms of worship through song, dance, burning incense, and oral traditions, contributes to the greater story of its cultural heritage import. Furthermore, as an object or structure evolves through time, external political, religious, or environmental forces can affect it as well. As tangible and intangible entities associated with the structure transform, its narrative becomes dynamic and difficult to easily record. The Initial Training Network for Digital Cultural Heritage (ITN-DCH), a Marie Curie Actions project under the EU 7th Framework Programme, seeks to challenge this complexity by developing a novel methodology capable of offering such a holistic framework. With the integration of digitisation, conservation, linked data, and retrieval systems for DCH, the nature of investigation and dissemination will be augmented significantly. Examples of utilisating and evaluating this framework will range from a UNESCOWorld Heritage site, the Byzantine church of Panagia Forviotissa Asinou in the Troodos Mountains of Cyprus, to various religious icons and a monument located at the Monastery of Saint Neophytos. The application of this effort to the Asinou church, representing the first case study of the ITN-DCH project, is used as a template example in order to assess the technical challenges involved in the creation of such a framework.

Chemical landscape analysis with the OpenTox framework.

PubMed

Jeliazkova, Nina; Jeliazkov, Vedrin

2012-01-01

The Structure-Activity Relationships (SAR) landscape and activity cliffs concepts have their origins in medicinal chemistry and receptor-ligand interactions modelling. While intuitive, the definition of an activity cliff as a "pair of structurally similar compounds with large differences in potency" is commonly recognized as ambiguous. This paper proposes a new and efficient method for identifying activity cliffs and visualization of activity landscapes. The activity cliffs definition could be improved to reflect not the cliff steepness alone, but also the rate of the change of the steepness. The method requires explicitly setting similarity and activity difference thresholds, but provides means to explore multiple thresholds and to visualize in a single map how the thresholds affect the activity cliff identification. The identification of the activity cliffs is addressed by reformulating the problem as a statistical one, by introducing a probabilistic measure, namely, calculating the likelihood of a compound having large activity difference compared to other compounds, while being highly similar to them. The likelihood is effectively a quantification of a SAS Map with defined thresholds. Calculating the likelihood relies on four counts only, and does not require the pairwise matrix storage. This is a significant advantage, especially when processing large datasets. The method generates a list of individual compounds, ranked according to the likelihood of their involvement in the formation of activity cliffs, and goes beyond characterizing cliffs by structure pairs only. The visualisation is implemented by considering the activity plane fixed and analysing the irregularities of the similarity itself. It provides a convenient analogy to a topographic map and may help identifying the most appropriate similarity representation for each specific SAR space. The proposed method has been applied to several datasets, representing different biological activities. Finally, the method is implemented as part of an existing open source Ambit package and could be accessed via an OpenTox API compliant web service and via an interactive application, running within a modern, JavaScript enabled web browser. Combined with the functionalities already offered by the OpenTox framework, like data sharing and remote calculations, it could be a useful tool for exploring chemical landscapes online.

Optical diagnostics of vascular reactions triggered by weak allergens using laser speckle-contrast imaging technique

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuznetsov, Yu L; Kalchenko, V V; Astaf'eva, N G

2014-08-31

The capability of using the laser speckle contrast imaging technique with a long exposure time for visualisation of primary acute skin vascular reactions caused by a topical application of a weak contact allergen is considered. The method is shown to provide efficient and accurate detection of irritant-induced primary acute vascular reactions of skin. The presented technique possesses a high potential in everyday diagnostic practice, preclinical studies, as well as in the prognosis of skin reactions to the interaction with potentially allergenic materials. (laser biophotonics)

Investigation of the vapour-plasma plume in the welding of titanium by high-power ytterbium fibre laser radiation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bykovskiy, D P; Petrovskii, V N; Uspenskiy, S A

2015-03-31

The vapour-plasma plume produced in the welding of 6-mm thick VT-23 titanium alloy plates by ytterbium fibre laser radiation of up to 10 kW power is studied in the protective Ar gas medium. High-speed video filming of the vapour-plasma plume is used to visualise the processes occurring during laser welding. The coefficient of inverse bremsstrahlung by the welding plasma plume is calculated from the data of the spectrometric study. (interaction of laser radiation with matter)

Cytoscape.js: a graph theory library for visualisation and analysis.

PubMed

Franz, Max; Lopes, Christian T; Huck, Gerardo; Dong, Yue; Sumer, Onur; Bader, Gary D

2016-01-15

Cytoscape.js is an open-source JavaScript-based graph library. Its most common use case is as a visualization software component, so it can be used to render interactive graphs in a web browser. It also can be used in a headless manner, useful for graph operations on a server, such as Node.js. Cytoscape.js is implemented in JavaScript. Documentation, downloads and source code are available at http://js.cytoscape.org. gary.bader@utoronto.ca. © The Author 2015. Published by Oxford University Press.

CyanoEXpress: A web database for exploration and visualisation of the integrated transcriptome of cyanobacterium Synechocystis sp. PCC6803.

PubMed

Hernandez-Prieto, Miguel A; Futschik, Matthias E

2012-01-01

Synechocystis sp. PCC6803 is one of the best studied cyanobacteria and an important model organism for our understanding of photosynthesis. The early availability of its complete genome sequence initiated numerous transcriptome studies, which have generated a wealth of expression data. Analysis of the accumulated data can be a powerful tool to study transcription in a comprehensive manner and to reveal underlying regulatory mechanisms, as well as to annotate genes whose functions are yet unknown. However, use of divergent microarray platforms, as well as distributed data storage make meta-analyses of Synechocystis expression data highly challenging, especially for researchers with limited bioinformatic expertise and resources. To facilitate utilisation of the accumulated expression data for a wider research community, we have developed CyanoEXpress, a web database for interactive exploration and visualisation of transcriptional response patterns in Synechocystis. CyanoEXpress currently comprises expression data for 3073 genes and 178 environmental and genetic perturbations obtained in 31 independent studies. At present, CyanoEXpress constitutes the most comprehensive collection of expression data available for Synechocystis and can be freely accessed. The database is available for free at http://cyanoexpress.sysbiolab.eu.

Virtual Environments for Mathematics and Geometry Education

ERIC Educational Resources Information Center

Kaufmann, Hannes

2009-01-01

Since ancient times mathematicians and geometricians have used visualisations to describe, discuss, study and teach mathematics. In mathematics education, visualisations are still used whenever possible to support teaching, to inspire students and feed their need to actually see abstract mathematical facts. In our times, virtual reality presents a…

Visualising the Roots of Quadratic Equations with Complex Coefficients

ERIC Educational Resources Information Center

Bardell, Nicholas S.

2014-01-01

This paper is a natural extension of the root visualisation techniques first presented by Bardell (2012) for quadratic equations with real coefficients. Consideration is now given to the familiar quadratic equation "y = ax[superscript 2] + bx + c" in which the coefficients "a," "b," "c" are generally…

[Visualisation methods for etheric formative forces].

PubMed

Burkhard, B; Kittel, R

2009-09-01

Rudolf Steiner, the founder of anthroposophy, suggested the development of visualisation methods for "etheric formative forces". The essential methods, their "spiritual scientific" basis and indications are described and their claims critically tested. The methods are not validated, the key criteria for diagnostic tests (reproducibility, sensitivity, specifity) are not given.

The EMBL-EBI bioinformatics web and programmatic tools framework.

PubMed

Li, Weizhong; Cowley, Andrew; Uludag, Mahmut; Gur, Tamer; McWilliam, Hamish; Squizzato, Silvano; Park, Young Mi; Buso, Nicola; Lopez, Rodrigo

2015-07-01

Since 2009 the EMBL-EBI Job Dispatcher framework has provided free access to a range of mainstream sequence analysis applications. These include sequence similarity search services (https://www.ebi.ac.uk/Tools/sss/) such as BLAST, FASTA and PSI-Search, multiple sequence alignment tools (https://www.ebi.ac.uk/Tools/msa/) such as Clustal Omega, MAFFT and T-Coffee, and other sequence analysis tools (https://www.ebi.ac.uk/Tools/pfa/) such as InterProScan. Through these services users can search mainstream sequence databases such as ENA, UniProt and Ensembl Genomes, utilising a uniform web interface or systematically through Web Services interfaces (https://www.ebi.ac.uk/Tools/webservices/) using common programming languages, and obtain enriched results with novel visualisations. Integration with EBI Search (https://www.ebi.ac.uk/ebisearch/) and the dbfetch retrieval service (https://www.ebi.ac.uk/Tools/dbfetch/) further expands the usefulness of the framework. New tools and updates such as NCBI BLAST+, InterProScan 5 and PfamScan, new categories such as RNA analysis tools (https://www.ebi.ac.uk/Tools/rna/), new databases such as ENA non-coding, WormBase ParaSite, Pfam and Rfam, and new workflow methods, together with the retirement of depreciated services, ensure that the framework remains relevant to today's biological community. © The Author(s) 2015. Published by Oxford University Press on behalf of Nucleic Acids Research.

Visualisation of abscisic acid and 12-oxo-phytodienoic acid in immature Phaseolus vulgaris L. seeds using desorption electrospray ionisation-imaging mass spectrometry

NASA Astrophysics Data System (ADS)

Enomoto, Hirofumi; Sensu, Takuya; Sato, Kei; Sato, Futoshi; Paxton, Thanai; Yumoto, Emi; Miyamoto, Koji; Asahina, Masashi; Yokota, Takao; Yamane, Hisakazu

2017-02-01

The plant hormone abscisic acid (ABA) and the jasmonic acid related-compound 12-oxo-phytodienoic acid (OPDA) play crucial roles in seed development, dormancy, and germination. However, a lack of suitable techniques for visualising plant hormones has restricted the investigation of their biological mechanisms. In the present study, desorption electrospray ionisation-imaging mass spectrometry (DESI-IMS), a powerful tool for visualising metabolites in biological tissues, was used to visualise ABA and OPDA in immature Phaseolus vulgaris L. seed sections. The mass spectra, peak values and chemical formulae obtained from the analysis of seed sections were consistent with those determined for ABA and OPDA standards, as were the precursor and major fragment ions observed in tandem mass spectrometry (MS/MS) imaging. Furthermore, the precursor and fragment ion images showed similar distribution patterns. In addition, the localisation of ABA and OPDA using DESI-IMS was confirmed using liquid chromatography-MS/MS (LC-MS/MS). The results indicated that ABA was mainly distributed in the radical and cotyledon of the embryo, whereas OPDA was distributed exclusively in external structures, such as the hilum and seed coat. The present study is the first to report the visualisation of plant hormones using IMS, and demonstrates that DESI-IMS is a promising technique for future plant hormone research.

Fingermark visualisation on uncirculated £5 (Bank of England) polymer notes: Initial process comparison studies.

PubMed

Downham, Rory P; Brewer, Eleigh R; King, Roberto S P; Luscombe, Aoife M; Sears, Vaughn G

2017-06-01

Experiments were conducted to investigate the effectiveness of a range of fingermark visualisation processes on brand new, uncirculated, £5 polymer banknotes (and their test note predecessors), as produced by the Bank of England (BoE). In the main study of this paper, a total of 14 individual processes were investigated on BoE £5 polymer banknotes, which included both 'Category A' processes (as recommended in the Home Office Fingermark Visualisation Manual) as well as recently developed processes, including fpNatural ® 2 powder (cuprorivaite) from Foster+Freeman and a vacuum metal deposition sequence that evaporates silver followed by zinc. Results from this preliminary investigation indicate that fpNatural ® 2, multimetal deposition, Wet Powder ™ Black, iron oxide powder suspension and black magnetic powder are the most effective processes on these uncirculated £5 BoE polymer banknotes, when viewed under "primary viewing" conditions (white light or fluorescence). Additional fingermarks were visualised on the polymer banknotes following the subsequent use of reflected infrared imaging and lifting techniques, and with the benefit of these techniques taken into consideration, the aforementioned processes remained amongst the most effective overall. This work provides initial insight into fingermark visualisation strategies for BoE £5 polymer banknotes, and the need for further studies in order to generate mature operational guidance is emphasised. Copyright © 2017 Elsevier B.V. All rights reserved.

Visualisation of abscisic acid and 12-oxo-phytodienoic acid in immature Phaseolus vulgaris L. seeds using desorption electrospray ionisation-imaging mass spectrometry

PubMed Central

Enomoto, Hirofumi; Sensu, Takuya; Sato, Kei; Sato, Futoshi; Paxton, Thanai; Yumoto, Emi; Miyamoto, Koji; Asahina, Masashi; Yokota, Takao; Yamane, Hisakazu

2017-01-01

The plant hormone abscisic acid (ABA) and the jasmonic acid related-compound 12-oxo-phytodienoic acid (OPDA) play crucial roles in seed development, dormancy, and germination. However, a lack of suitable techniques for visualising plant hormones has restricted the investigation of their biological mechanisms. In the present study, desorption electrospray ionisation-imaging mass spectrometry (DESI-IMS), a powerful tool for visualising metabolites in biological tissues, was used to visualise ABA and OPDA in immature Phaseolus vulgaris L. seed sections. The mass spectra, peak values and chemical formulae obtained from the analysis of seed sections were consistent with those determined for ABA and OPDA standards, as were the precursor and major fragment ions observed in tandem mass spectrometry (MS/MS) imaging. Furthermore, the precursor and fragment ion images showed similar distribution patterns. In addition, the localisation of ABA and OPDA using DESI-IMS was confirmed using liquid chromatography-MS/MS (LC-MS/MS). The results indicated that ABA was mainly distributed in the radical and cotyledon of the embryo, whereas OPDA was distributed exclusively in external structures, such as the hilum and seed coat. The present study is the first to report the visualisation of plant hormones using IMS, and demonstrates that DESI-IMS is a promising technique for future plant hormone research. PMID:28211480

Visualisation Ability of Senior High School Students with Using GeoGebra and Transparent Mica

NASA Astrophysics Data System (ADS)

Thohirudin, M.; Maryati, TK; Dwirahayu, G.

2017-04-01

Visualisation ability is an ability to process, inform, and transform object which suitable for geometry topic in math. This research aims to describe the influence of using software GeoGebra and transparent mica for student’s visualisation ability. GeoGebra is shortness of geometry and algebra. GeoGebra is an open source program that is created for math. Transparent mica is a tool that is created by the author to transform a geometry object. This research is a quantitative experiment model. The subject of this research were students in grade XII of science program in Annajah Senior High School Rumpin with two classes which one as an experiment class (science one) and another one as a control class (science two). Experiment class use GeoGebra and transparent mica in the study, and control class use powerpoint in the study. Data of student’s visualisation ability is collected from posttest with visual questions which are gifted at the end of the research to both classes with topic “transformation geometry”. This research resulted that studying with GeoGebra and transparent mica had a better influence than studying with powerpoint to student’s visualisation ability. The time of study in class and the habit of the students to use software and tool affected the result of research. Although, GeoGebra and transparent mica can give help to students in transformation geometry topic.

String cavitation formation inside fuel injectors

NASA Astrophysics Data System (ADS)

Reid, B. A.; Gavaises, M.; Mitroglou, N.; Hargrave, G. K.; Garner, C. P.; McDavid, R. M.

2015-12-01

The formation of vortex or ‘string’ cavitation has been visualised at pressures up to 2000 bar in an automotive-sized optical diesel fuel injector nozzle. The multi-hole nozzle geometry studied allowed observation of the hole-to-hole vortex interaction and, in particular, that of a bridging vortex in the sac region between the holes. Above a threshold Reynolds number, their formation and appearance during a 2 ms injection event was repeatable and independent of upstream pressure and cavitation number. In addition, two different hole layouts and threedimensional flow simulations have been employed to describe how, the relative positions of adjacent holes influenced the formation and hole-to-hole interaction of the observed string cavitation vortices, with good agreement between the experimental and simulation results being achieved.

The impact of "omic" and imaging technologies on assessing the host immune response to biodefence agents.

PubMed

Tree, Julia A; Flick-Smith, Helen; Elmore, Michael J; Rowland, Caroline A

2014-01-01

Understanding the interactions between host and pathogen is important for the development and assessment of medical countermeasures to infectious agents, including potential biodefence pathogens such as Bacillus anthracis, Ebola virus, and Francisella tularensis. This review focuses on technological advances which allow this interaction to be studied in much greater detail. Namely, the use of "omic" technologies (next generation sequencing, DNA, and protein microarrays) for dissecting the underlying host response to infection at the molecular level; optical imaging techniques (flow cytometry and fluorescence microscopy) for assessing cellular responses to infection; and biophotonic imaging for visualising the infectious disease process. All of these technologies hold great promise for important breakthroughs in the rational development of vaccines and therapeutics for biodefence agents.

On Developing Students' Spatial Visualisation Ability

ERIC Educational Resources Information Center

Risma, Dwi Afrini; Putri, Ratu Ilma Indra; Hartono, Yusuf

2013-01-01

This research aims at studying on how students develop their spatial visualisation abilities. In this paper, one of five activities in an ongoing classroom activity is discussed. This paper documents students' learning activity in exploring the building blocks. The goal of teaching experiment is to support the development of students' spatial…

Visualising Learning Design in LAMS: A Historical View

ERIC Educational Resources Information Center

Dalziel, James

2011-01-01

The Learning Activity Management System (LAMS) provides a web-based environment for the creation, sharing, running and monitoring of Learning Designs. A central feature of LAMS is the visual authoring environment, where educators use a drag-and-drop environment to create sequences of learning activities. The visualisation is based on boxes…

Becoming Teacher: A/r/tographical Inquiry and Visualising Metaphor

ERIC Educational Resources Information Center

Boulton, Adrienne; Grauer, Kit; L. Irwin, Rita

2017-01-01

A great deal has been written about the representational use of metaphor to understand teacher candidates'/new teachers' conceptions of teacher practice. This article will discuss recent research that explored secondary visual art teacher candidates'/new teachers' "visualising" of visual metaphors to provoke their a/r/tographical inquiry…

The Language of Visualisation

NASA Astrophysics Data System (ADS)

Wyatt, R.

2014-01-01

There is a visual language present in all images and this article explores the meaning of these languages, their importance, and what it means for the visualisation of science. Do we, as science communicators, confuse and confound our audiences by assuming the visual vernacular of the scientist or isolate our scientific audience by ignoring it?

Developing Students' Functional Thinking in Algebra through Different Visualisations of a Growing Pattern's Structure

ERIC Educational Resources Information Center

Wilkie, Karina J.; Clarke, Doug M.

2016-01-01

Spatial visualisation of geometric patterns and their generalisation have become a recognised pathway to developing students' functional thinking and understanding of variables in algebra. This design-based research project investigated upper primary students' development of explicit generalisation of functional relationships and their…

Mining collections of compounds with Screening Assistant 2

PubMed Central

2012-01-01

Background High-throughput screening assays have become the starting point of many drug discovery programs for large pharmaceutical companies as well as academic organisations. Despite the increasing throughput of screening technologies, the almost infinite chemical space remains out of reach, calling for tools dedicated to the analysis and selection of the compound collections intended to be screened. Results We present Screening Assistant 2 (SA2), an open-source JAVA software dedicated to the storage and analysis of small to very large chemical libraries. SA2 stores unique molecules in a MySQL database, and encapsulates several chemoinformatics methods, among which: providers management, interactive visualisation, scaffold analysis, diverse subset creation, descriptors calculation, sub-structure / SMART search, similarity search and filtering. We illustrate the use of SA2 by analysing the composition of a database of 15 million compounds collected from 73 providers, in terms of scaffolds, frameworks, and undesired properties as defined by recently proposed HTS SMARTS filters. We also show how the software can be used to create diverse libraries based on existing ones. Conclusions Screening Assistant 2 is a user-friendly, open-source software that can be used to manage collections of compounds and perform simple to advanced chemoinformatics analyses. Its modular design and growing documentation facilitate the addition of new functionalities, calling for contributions from the community. The software can be downloaded at http://sa2.sourceforge.net/. PMID:23327565

Mining collections of compounds with Screening Assistant 2.

PubMed

Guilloux, Vincent Le; Arrault, Alban; Colliandre, Lionel; Bourg, Stéphane; Vayer, Philippe; Morin-Allory, Luc

2012-08-31

High-throughput screening assays have become the starting point of many drug discovery programs for large pharmaceutical companies as well as academic organisations. Despite the increasing throughput of screening technologies, the almost infinite chemical space remains out of reach, calling for tools dedicated to the analysis and selection of the compound collections intended to be screened. We present Screening Assistant 2 (SA2), an open-source JAVA software dedicated to the storage and analysis of small to very large chemical libraries. SA2 stores unique molecules in a MySQL database, and encapsulates several chemoinformatics methods, among which: providers management, interactive visualisation, scaffold analysis, diverse subset creation, descriptors calculation, sub-structure / SMART search, similarity search and filtering. We illustrate the use of SA2 by analysing the composition of a database of 15 million compounds collected from 73 providers, in terms of scaffolds, frameworks, and undesired properties as defined by recently proposed HTS SMARTS filters. We also show how the software can be used to create diverse libraries based on existing ones. Screening Assistant 2 is a user-friendly, open-source software that can be used to manage collections of compounds and perform simple to advanced chemoinformatics analyses. Its modular design and growing documentation facilitate the addition of new functionalities, calling for contributions from the community. The software can be downloaded at http://sa2.sourceforge.net/.

Active Provenance in Data-intensive Research

NASA Astrophysics Data System (ADS)

Spinuso, Alessandro; Mihajlovski, Andrej; Filgueira, Rosa; Atkinson, Malcolm

2017-04-01

Scientific communities are building platforms where the usage of data-intensive workflows is crucial to conduct their research campaigns. However managing and effectively support the understanding of the 'live' processes, fostering computational steering, sharing and re-use of data and methods, present several bottlenecks. These are often caused by the poor level of documentation on the methods and the data and how users interact with it. This work wants to explore how in such systems, flexibility in the management of the provenance and its adaptation to the different users and application contexts can lead to new opportunities for its exploitation, improving productivity. In particular, this work illustrates a conceptual and technical framework enabling tunable and actionable provenance in data-intensive workflow systems in support of reproducible science. It introduces the concept of Agile data-intensive systems to define the characteristic of our target platform. It shows a novel approach to the integration of provenance mechanisms, offering flexibility in the scale and in the precision of the provenance data collected, ensuring its relevance to the domain of the data-intensive task, fostering its rapid exploitation. The contributions address aspects of the scale of the provenance records, their usability and active role in the research life-cycle. We will discuss the use of dynamically generated provenance types as the approach for the integration of provenance mechanisms into a data-intensive workflow system. Enabling provenance can be transparent to the workflow user and developer, as well as fully controllable and customisable, depending from their expertise and the application's reproducibility, monitoring and validation requirements. The API that allows the realisation and adoption of a provenance type is presented, especially for what concerns the support of provenance profiling, contextualisation and precision. An actionable approach to provenance management will be also discussed, enabling provenance-driven operations at runtime, regardless of the enactment technologies and connectivity impediments. We proposes a framework based on concepts such as provenance clusters and provenance sensors, envisaging new potential for exploiting large quantities of provenance traces at runtime. Finally the work will also introduce how the underlying provenance model can be explored with big-data visualization techniques, aiming at producing comprehensive and interactive views on top of large and heterogeneous provenance data. We will demonstrate the adoption of alternative visualisation methods, from detailed and localised interactive graphs to radial-views, serving different purposes and expertise. Combining provenance types, selective rules, extensible metadata with reactive clustering opens a new and more versatile role of the lineage information in the research life-cycle, thanks to its improved usability. The flexible profiling of the proposed framework offers aid to the human analysis of the process, with the support of advanced and intuitive interactive graphical tools. The Active provenance methods are discussed in the context of a real implementation for a data-intensive library (dispel4py) and its adoption within use cases for computational seismology, climate studies and generic correlation analysis.

Open Software Tools Applied to Jordan's National Multi-Agent Water Management Model

NASA Astrophysics Data System (ADS)

Knox, Stephen; Meier, Philipp; Harou, Julien; Yoon, Jim; Selby, Philip; Lachaut, Thibaut; Klassert, Christian; Avisse, Nicolas; Khadem, Majed; Tilmant, Amaury; Gorelick, Steven

2016-04-01

Jordan is the fourth most water scarce country in the world, where demand exceeds supply in a politically and demographically unstable context. The Jordan Water Project (JWP) aims to perform policy evaluation by modelling the hydrology, economics, and governance of Jordan's water resource system. The multidisciplinary nature of the project requires a modelling software system capable of integrating submodels from multiple disciplines into a single decision making process and communicating results to stakeholders. This requires a tool for building an integrated model and a system where diverse data sets can be managed and visualised. The integrated Jordan model is built using Pynsim, an open-source multi-agent simulation framework implemented in Python. Pynsim operates on network structures of nodes and links and supports institutional hierarchies, where an institution represents a grouping of nodes, links or other institutions. At each time step, code within each node, link and institution can executed independently, allowing for their fully autonomous behaviour. Additionally, engines (sub-models) perform actions over the entire network or on a subset of the network, such as taking a decision on a set of nodes. Pynsim is modular in design, allowing distinct modules to be modified easily without affecting others. Data management and visualisation is performed using Hydra (www.hydraplatform.org), an open software platform allowing users to manage network structure and data. The Hydra data manager connects to Pynsim, providing necessary input parameters for the integrated model. By providing a high-level portal to the model, Hydra removes a barrier between the users of the model (researchers, stakeholders, planners etc) and the model itself, allowing them to manage data, run the model and visualise results all through a single user interface. Pynsim's ability to represent institutional hierarchies, inter-network communication and the separation of node, link and institutional logic from higher level processes (engine) suit JWP's requirements. The use of Hydra Platform and Pynsim helps make complex customised models such as the JWP model easier to run and manage with international groups of researchers.

Visualising Astronomy: Visualising Exoplanets

NASA Astrophysics Data System (ADS)

Wyatt, R.

2012-05-01

In my previous column1, I described some of the varied means of diagramming the data about exoplanets and exoplanetary systems. Frankly, however, those methods don't do justice to the bigger picture: we need a wider range of tools to help people grok2 (to understand intuitively) what astronomical observations have revealed. (Normally, I use the term "visualisation" to refer to the visual representation of data, but I'm going to relax that a little in this context; instead, I'll interpret the word in its more commonplace usage of creating a mental image.) How can we help people comprehend the scope, the breadth, and the impact of the spectacular observations of planets around other stars?

Virtual reality visualization algorithms for the ALICE high energy physics experiment on the LHC at CERN

NASA Astrophysics Data System (ADS)

Myrcha, Julian; Trzciński, Tomasz; Rokita, Przemysław

2017-08-01

Analyzing massive amounts of data gathered during many high energy physics experiments, including but not limited to the LHC ALICE detector experiment, requires efficient and intuitive methods of visualisation. One of the possible approaches to that problem is stereoscopic 3D data visualisation. In this paper, we propose several methods that provide high quality data visualisation and we explain how those methods can be applied in virtual reality headsets. The outcome of this work is easily applicable to many real-life applications needed in high energy physics and can be seen as a first step towards using fully immersive virtual reality technologies within the frames of the ALICE experiment.

Services for Emodnet-Chemistry Data Products

NASA Astrophysics Data System (ADS)

Santinelli, Giorgio; Hendriksen, Gerrit; Barth, Alexander

2016-04-01

In the framework of Emodnet Chemistry lot, data products from regional leaders were made available in order to transform information into a database. This has been done by using functions and scripts, reading so-called enriched ODV files and inserting data directly into a cloud relational geodatabase. The main table is the one of observations which contains the main data and meta-data associated with the enriched ODV files. A particular implementation in data loading is used in order to improve on-the-fly computational speed. Data from Baltic Sea, North Sea, Mediterrean, Black Sea and part of the Atlantic region has been entered into the geodatabase, and consequently being instantly available from the OceanBrowser Emodnet portal. Furthermore, Deltares has developed an application that provides additional visualisation services for the aggregated and validated data collections. The visualisations are produced by making use of part of the OpenEarthTool stack (http://www.openearth.eu), by the integration of Web Feature Services and by the implementation of Web Processing Services. The goal is the generation of server-side plots of timeseries, profiles, timeprofiles and maps of selected parameters from data sets of selected stations. Regional data collections are retrieved using Emodnet Chemistry cloud relational geo-database. The spatial resolution in time and the intensity of data availability for selected parameters is shown using Web Service requests via the OceanBrowser Emodnet Web portal. OceanBrowser also shows station reference codes, which are used to establish a link for additional metadata, further data shopping and download.

Schoolyard physical activity in 14-year-old adolescents assessed by mobile GPS and heart rate monitoring analysed by GIS.

PubMed

Fjørtoft, Ingunn; Löfman, Owe; Halvorsen Thorén, Kine

2010-11-01

Environmental settings seem to influence the activity patterns of children in neighbourhoods and schoolyards, the latter being an important arena to promote physical activity (PA) in school children. New technology has made it possible to describe free-living PA in interaction with the environment. This study focused on how schoolyard environments influenced the activity patterns and intensity levels in 14-year-old children and whether PA levels in adolescents complied with official recommendations. Another objective was to introduce methodology of using a mobile global positioning system (GPS) device with synchronous heart rate (HR) recordings as a proxy for PA level and a geographical information system (GIS) for spatial analyses. The sample constituted of 81 children (aged 14 years) from two schools. Movement patterns and activity levels were recorded during lunch break applying a GPS Garmin Forerunner 305 with combined HR monitoring and analysed in a GIS by an overlaid grid and kriging interpolation. Spatial data from GPS recordings showed particular movement patterns in the schoolyards. Low activity levels (mean HR < 120 bpm) dominated in both schools with no gender differences. Activities located to a handball goal area showed the highest monitored HR (>160 bpm) with higher intensity in girls than in boys. Movement patterns and PA generated in GIS for visualisation and analysis enabled direct and realistic description of utilising of schoolyard facilities and activity levels. Linking GPS data and PA levels to spatial structures made it possible to visualise the environmental interaction with PA and which environments promoted low or high PA.

CNVinspector: a web-based tool for the interactive evaluation of copy number variations in single patients and in cohorts.

PubMed

Knierim, Ellen; Schwarz, Jana Marie; Schuelke, Markus; Seelow, Dominik

2013-08-01

Many genetic disorders are caused by copy number variations (CNVs) in the human genome. However, the large number of benign CNV polymorphisms makes it difficult to delineate causative variants for a certain disease phenotype. Hence, we set out to create software that accumulates and visualises locus-specific knowledge and enables clinicians to study their own CNVs in the context of known polymorphisms and disease variants. CNV data from healthy cohorts (Database of Genomic Variants) and from disease-related databases (DECIPHER) were integrated into a joint resource. Data are presented in an interactive web-based application that allows inspection, evaluation and filtering of CNVs in single individuals or in entire cohorts. CNVinspector provides simple interfaces to upload CNV data, compare them with own or published control data and visualise the results in graphical interfaces. Beyond choosing control data from different public studies, platforms and methods, dedicated filter options allow the detection of CNVs that are either enriched in patients or depleted in controls. Alternatively, a search can be restricted to those CNVs that appear in individuals of similar clinical phenotype. For each gene of interest within a CNV, we provide a link to NCBI, ENSEMBL and the GeneDistiller search engine to browse for potential disease-associated genes. With its user-friendly handling, the integration of control data and the filtering options, CNVinspector will facilitate the daily work of clinical geneticists and accelerate the delineation of new syndromes and gene functions. CNVinspector is freely accessible under http://www.cnvinspector.org.

Segeberg 1600 - Reconstructing a Historic Town for Virtual Reality Visualisation as AN Immersive Experience

NASA Astrophysics Data System (ADS)

Deggim, S.; Kersten, T. P.; Tschirschwitz, F.; Hinrichsen, N.

2017-11-01

The 3D reconstruction of historic buildings and cities offers an opportunity to experience the history of relevant objects and their development over the centuries. Digital visualisations of such historic objects allow for a more natural view of history as well as showing information that is not possible in a real world setting. New presentation forms, such as the virtual reality (VR) system HTC Vive, can be used to disseminate information in another dimension and simplify the access by changing the user's viewpoint from a listener and viewer into being an integrated part of an interactive situation. In general, this approach is a combination of education and entertainment, also known as "edutainment" or "gamification", a term used in the education sector as describing where motivation to learn is encouraged through adding a competitive element. It is thus a step away from simple consumption of information towards experiencing information and a more literal interpretation of "living history". In this contribution, we present the development of a 3D reconstruction of the two towns Segeberg and Gieschenhagen (today: Bad Segeberg) in Schleswig-Holstein, Germany in the Early Modern Age around 1600. The historic landscape and its conversion from a reconstructed virtual town model into an interactive VR application is also described. The reconstruction is based on a recent digital terrain model as well as survey data of surviving buildings, historic visual information based on historic drawings and written accounts from that era. All datasets are combined to a single walkable virtual world that spans approximately 3 km2.

Competence Visualisation: Making Sense of Data from 21st-Century Technologies in Language Learning

ERIC Educational Resources Information Center

Bull, Susan; Wasson, Barbara

2016-01-01

This paper introduces an open learner model approach to learning analytics to combine the variety of data available from the range of applications and technologies in language learning, for visualisation of language learning competences to learners and teachers in the European language context. Specific examples are provided as illustrations…

The Relationship between Research Method and Visual Display: A Study of Conference Proceedings in the Field of Knowledge Organization

ERIC Educational Resources Information Center

Friedman, Alon

2014-01-01

Introduction: "Research method" refers to how to conduct research, how to measure progress, and what constitutes success. Visualisation has become the platform for communicating research findings according to Friedman and Smiraglia. Knowledge organization aims to organize knowledge and many researchers employ visualisation in their…

The Effects of Computer-Aided Design Software on Engineering Students' Spatial Visualisation Skills

ERIC Educational Resources Information Center

Kösa, Temel; Karakus, Fatih

2018-01-01

The purpose of this study was to determine the influence of computer-aided design (CAD) software-based instruction on the spatial visualisation skills of freshman engineering students in a computer-aided engineering drawing course. A quasi-experimental design was applied, using the Purdue Spatial Visualization Test-Visualization of Rotations…

A Visualisation-Based Semiotic Analysis of Learners' Conceptual Understanding of Graphical Functional Relationships

ERIC Educational Resources Information Center

Mudaly, Vimolan

2014-01-01

Within the South African school curriculum, the section on graphical functional relationships consists of signs which include symbols, notation and imagery. In a previous article we explored the role visualisation played in the way learners understood mathematical concepts. That paper reported on the learners' fixation with the physical features…

Lossy compression for Animated Web Visualisation

NASA Astrophysics Data System (ADS)

Prudden, R.; Tomlinson, J.; Robinson, N.; Arribas, A.

2017-12-01

This talk will discuss an technique for lossy data compression specialised for web animation. We set ourselves the challenge of visualising a full forecast weather field as an animated 3D web page visualisation. This data is richly spatiotemporal, however it is routinely communicated to the public as a 2D map, and scientists are largely limited to visualising data via static 2D maps or 1D scatter plots. We wanted to present Met Office weather forecasts in a way that represents all the generated data. Our approach was to repurpose the technology used to stream high definition videos. This enabled us to achieve high rates of compression, while being compatible with both web browsers and GPU processing. Since lossy compression necessarily involves discarding information, evaluating the results is an important and difficult problem. This is essentially a problem of forecast verification. The difficulty lies in deciding what it means for two weather fields to be "similar", as simple definitions such as mean squared error often lead to undesirable results. In the second part of the talk, I will briefly discuss some ideas for alternative measures of similarity.

Urbanisation and its effect on risk factors associated with childhood diarrhoea in Mbour, Senegal: A visualisation.

PubMed

Thiam, Sokhna; Fuhrimann, Samuel; Niang-Diène, Aminata; Sy, Ibrahima; Faye, Ousmane; Utzinger, Jürg; Cissé, Guéladio

2017-11-27

Rapid urbanisation, particularly in secondary cities in Africa, brings along specific challenges for global health, including the prevention and control of infectious diseases such as diarrhoea. Our purpose was to visualise urbanisation trends and its effect on risk factors associated with childhood diarrhoea, e.g. water supply, sanitation, wastewater and solid waste management in Mbour, a secondary city in south-western Senegal. Our visualisation is facilitated by epidemiological and geographical surveys carried out in 2016. A deeper spatial and visual understanding of the urbanisation trends and the disparities of diarrhoea-associated risk factors might lead to the implementation of suitable health interventions and preventive measures. Our visualisation is aimed to serve as a basis for discussion and as a decision support tool for policymakers, municipal officials and local communities to prioritise interventions related to water, sanitation and waste management with a view to reduce the environmental and health risks in the rapidly growing city of Mbour, which is set as an example for other similar secondary cities across low- and middle-income countries in Africa.

Visualising crystal packing interactions in solid-state NMR: Concepts and applications

NASA Astrophysics Data System (ADS)

Zilka, Miri; Sturniolo, Simone; Brown, Steven P.; Yates, Jonathan R.

2017-10-01

In this article, we introduce and apply a methodology, based on density functional theory and the gauge-including projector augmented wave approach, to explore the effects of packing interactions on solid-state nuclear magnetic resonance (NMR) parameters. A visual map derived from a so-termed "magnetic shielding contribution field" can be made of the contributions to the magnetic shielding of a specific site—partitioning the chemical shift to specific interactions. The relation to the established approaches of examining the molecule to crystal change in the chemical shift and the nuclear independent chemical shift is established. The results are applied to a large sample of 71 molecular crystals and three further specific examples from supermolecular chemistry and pharmaceuticals. This approach extends the NMR crystallography toolkit and provides insight into the development of both cluster based approaches to the predictions of chemical shifts and for empirical predictions of chemical shifts in solids.

Concept relationship editor: a visual interface to support the assertion of synonymy relationships between taxonomic classifications

NASA Astrophysics Data System (ADS)

Craig, Paul; Kennedy, Jessie

2008-01-01

An increasingly common approach being taken by taxonomists to define the relationships between taxa in alternative hierarchical classifications is to use a set-based notation which states relationship between two taxa from alternative classifications. Textual recording of these relationships is cumbersome and difficult for taxonomists to manage. While text based GUI tools are beginning to appear which ease the process, these have several limitations. Interactive visual tools offer greater potential to allow taxonomists to explore the taxa in these hierarchies and specify such relationships. This paper describes the Concept Relationship Editor, an interactive visualisation tool designed to support the assertion of relationships between taxonomic classifications. The tool operates using an interactive space-filling adjacency layout which allows users to expand multiple lists of taxa with common parents so they can explore and assert relationships between two classifications.

A study of the Interaction of bovine Hemoglobin with Synthetic dyes using Spectroscopic techniques and Molecular docking

NASA Astrophysics Data System (ADS)

Kamaljeet; Bansal, Saurabh; SenGupta, Uttara

2016-12-01

Synthetic dyes are a very efficient class of dyes that are ingested or come into contact with the skin from numerous sources (cosmetics, textiles, leather, paper, drugs). An important component of their safety profile is the interactions that they form after they enter the body. Hemoglobin is a functionally important protein that can form multiple interactions with soluble compounds present in the blood, and hence forms an important aspect of the toxicological or safety profile of the dyes. Here we study the interaction between bovine haemoglobin and organic dyes using UV-Vis absorbance and fluorescence spectroscopy. Molecular modelling was used to visualise the binding site and partners of the dye molecules, within the hemoglobin molecule. We find that all four dyes studied form sufficiently strong interactions with haemoglobin to allow for the formation of potentially toxic interactions. Molecular modelling showed that all 4 dyes bound within the central cavity of the haemoglobin molecule. However, binding partners could not be identified as multiple binding conformations with very similar energies were possible for each dye.

Collecting, Visualising, Communicating and Modelling Geographic Data for the Sciences

NASA Astrophysics Data System (ADS)

Crooks, A.; Hudson-Smith, A.; Milton, R.; Smith, D.; Batty, M.; Neuhaus, F.

2009-12-01

New web technologies and task specific software packages and services are fundamentally changing the way we share, collect, visualise, communicate and distribute geographic information. Coupled with these new technologies is the emergence of rich fine scale and extensive geographical datasets of the built environment. Such technologies and data are providing opportunities for both the social and physical sciences that were unimaginable ten years ago. Within this paper we discus such change from our own experiences at the Centre of Advanced Spatial Analysis. Specifically, how it is now possible to harness the crowd to collect peoples’ opinions about topical events such as the current financial crisis, in real time and map the results, through the use of our GMapCreator software and the MapTube website. Furthermore, such tools allow for widespread dissemination and visualisation of geographic data to whoever has an internet connection. We will explore how one can use new datasets to visualise the city using our Virtual London model as an example. Within the model individual buildings are tagged with multiple attributes providing a lens to explore the urban structure offering a plethora of research applications. We then turn to how one can visualise and communicate such data through low cost software and virtual worlds such as Crysis and Second Life with a look into their potential for modelling and finally how we disseminated much of this information through weblogs (blogs) such as Digital Urban, GIS and Agent-based modelling and Urban Tick.

Radiographic inspection of porosity in pure titanium dumbbell castings.

PubMed

Nuñez, Juliana Maria Costa; Takahashi, Jessica Mie Ferreira Koyama; Henriques, Guilherme Elias Pessanha; Nóbilo, Mauro Antônio de Arruda; Consani, Rafael Leonardo Xediek; Mesquita, Marcelo Ferraz

2011-09-01

  Titanium frameworks are frequently indicated for implant supported prostheses; however, voids are usually encountered inside cast titanium.   This study aimed to confirm the efficacy of a radiographic technique for inspection of porosity in commercially pure titanium castings with different diameter.   Sixty dumbbell rods (n=20) with a central 1.5, 2.0 and 3.5mm diameter were prepared by lost-wax casting. Cast specimens were finished and polished and submitted to radiographic examination (90kV, 15mA, 0.6s and 10-13mm of distance) using periapical film. The radiographs were visually analysed for the presence of porosity in the extension of the dumbbell or in the central portion of the rods. Data were submitted to Pearson Chi-square test (5%).   The tested radiographic method proved to be suitable for the evaluation of cast frameworks. Internal porosities were observed in most of the specimens (91.7%) (p=0.0005); however, only 20% occurred on the central portion of the rods (p=0.612).   Internal porosities can be visualised through radiographs and occur mostly in small diameter structures. The radiographic evaluation of metal structures can improve the quality of frameworks and thereby potentially increase the longevity of the rehabilitation. © 2010 The Gerodontology Society and John Wiley & Sons A/S.

C-MAC videolaryngoscope versus Macintosh laryngoscope for tracheal intubation: A systematic review and meta-analysis with trial sequential analysis.

PubMed

Hoshijima, Hiroshi; Mihara, Takahiro; Maruyama, Koichi; Denawa, Yohei; Mizuta, Kentaro; Shiga, Toshiya; Nagasaka, Hiroshi

2018-06-09

The C-MAC laryngoscope (C-MAC) is a videolaryngoscope that uses a modified Macintosh blade. Although several anecdotal reports exist, it remains unclear whether the C-MAC is superior to the Macintosh laryngoscope for tracheal intubation in the adult population. Systematic review, meta-analysis. Operating room, intensive care unit. For inclusion in our analysis, studies had to be prospective randomised trials which compared the C-MAC with the Macintosh laryngoscope for tracheal intubation in the adult population. Data on success rates, intubation time, glottic visualisation and incidence of external laryngeal manipulations (ELM) during tracheal intubation were extracted from the identified studies. In subgroup analysis, we separated those parameters to assess the influence of the airway condition (normal or difficult) and laryngoscopists (novice or experienced). We conducted a trial sequential analysis (TSA). Sixteen articles with 18 trials met the inclusion criteria. The C-MAC provided better glottic visualisation compared to the Macintosh (RR, 1.08; 95% CI, 1.03-1.14). TSA corrected the CI to 1.01-1.19; thus, total sample size reached the required information size (RIS). Success rates and intubation time did not differ significantly between the laryngoscopes. TSA showed that total sample size reached the RIS for success rates. The TSA Z curve surpassed the futility boundary. The C-MAC required less ELM compared to the Macintosh (RR, 0.83; 95% CI, 0.72-0.96). TSA corrected the CI to 0.67-1.03; 52.3% of the RIS was achieved. In difficult airways, the C-MAC showed superior success rates, glottic visualisation, and less ELM compared to the Macintosh. Among experienced laryngoscopists, the C-MAC offered better glottic visualisation with less ELM than the Macintosh. The C-MAC provided better glottic visualisation and less ELM (GRADE: Very Low or Moderate), with improved success rates, glottic visualisation, and less ELM in difficult airways. Copyright © 2018 Elsevier Inc. All rights reserved.

Evaluation of the molecular level visualisation approach for teaching and learning chemistry in Thailand

NASA Astrophysics Data System (ADS)

Phenglengdi, Butsari

This research evaluates the use of a molecular level visualisation approach in Thai secondary schools. The goal is to obtain insights about the usefulness of this approach, and to examine possible improvements in how the approach might be applied in the future. The methodology used for this research used both qualitative and quantitative approaches. Data were collected in the form of pre- and post-intervention multiple choice questions, open-ended-questions, drawing exercises, one-to-one interviews and video recordings of class activity. The research was conducted in two phases, involving a total of 261 students from the 11th Grade in Thailand. The use of VisChem animations in three studies was evaluated in Phase I. Study 1 was a pilot study exploring the benefits of incorporating VisChem animations to portray the molecular level. Study 2 compared test results between students exposed to these animations of molecular level events, and those not. Finally, in Study 3, test results were gathered from different types of schools (a rural school, a city school, and a university school). The results showed that students (and teachers) had misconceptions at the molecular level, and VisChem animations could help students understand chemistry concepts at the molecular level across all three types of schools. While the animation treatment group had a better score on the topic of states of water, the non-animation treatment group had a better score on the topic of dissolving sodium chloride in water than the animation group. The molecular level visualisation approach as a learning design was evaluated in Phase II. This approach involved a combination of VisChem animations, pictures, and diagrams together with the seven-step VisChem learning design. The study involved three classes of students, each with a different treatment, described as Class A - Traditional approach; Class B - VisChem animations with traditional approach; and Class C - Molecular level visualisation approach. Pre-test and post-test scores were compared across the three classes. The results from the multiple choice and calculation tests showed that the Class C - molecular level visualisation approach group demonstrated a deeper understanding of chemistry concepts than students in Classes A and B. However, the results showed that all the students were unable to perform satisfactorily on the calculation tests because the students had insufficient prior knowledge about stoichiometry to connect with the new knowledge. In the drawing tests the students exposed to the molecular level visualisation approach had a better mental model than the other classes, albeit with some remaining misconceptions. The findings highlight the intersecting nature of the teacher, student, and modelling in chemistry teaching. Use of a multi-step molecular level visualisation approach that encourages observation, reflection of prior understanding, and multiple opportunities at viewing (and using various visualisation elements), are key elements leading to a deeper understanding of chemistry. Presentation of the multi-step molecular level visualisation approach must be coupled with careful consideration of student prior knowledge, and with adequate guidance from a teacher who understands the topics at a deep level.

Towards Gesture-Based Multi-User Interactions in Collaborative Virtual Environments

NASA Astrophysics Data System (ADS)

Pretto, N.; Poiesi, F.

2017-11-01

We present a virtual reality (VR) setup that enables multiple users to participate in collaborative virtual environments and interact via gestures. A collaborative VR session is established through a network of users that is composed of a server and a set of clients. The server manages the communication amongst clients and is created by one of the users. Each user's VR setup consists of a Head Mounted Display (HMD) for immersive visualisation, a hand tracking system to interact with virtual objects and a single-hand joypad to move in the virtual environment. We use Google Cardboard as a HMD for the VR experience and a Leap Motion for hand tracking, thus making our solution low cost. We evaluate our VR setup though a forensics use case, where real-world objects pertaining to a simulated crime scene are included in a VR environment, acquired using a smartphone-based 3D reconstruction pipeline. Users can interact using virtual gesture-based tools such as pointers and rulers.

The Role of Visualisation in Developing Critical Thinking in Mathematics

ERIC Educational Resources Information Center

Makina, A.

2010-01-01

Research has been conducted on the role and importance of visualisation in many fields, including psychology, but very little has been done to extend its role to mathematics education in particular. Furthermore, much research has been done on the importance of critical thinking. However, to date not much has been done to clarify the fact that…

Overcoming Problems in Doctoral Writing through the Use of Visualisations: Telling Our Stories

ERIC Educational Resources Information Center

Barrett, Terry; Hussey, Jennie

2015-01-01

Doctoral students experience many challenges on the long journey towards completion. Common problems include: synthesising data, working at a conceptual level, clarifying the relationship of the parts of the thesis to the whole, finding a voice and completing a viva successfully. Few authors have addressed the use of visualisations to meet these…

Spatial versus Object Visualisation: The Case of Mathematical Understanding in Three-Dimensional Arrays of Cubes and Nets

ERIC Educational Resources Information Center

Pitta-Pantazi, Demetra; Christou, Constantinos

2010-01-01

This paper investigates the relations of students' spatial and object visualisation with their analytic, creative and practical abilities in three-dimensional geometry. Fifty-three 11-year-olds were tested using a Greek modified version of the Object-Spatial Imagery Questionnaire (OSIQ) (Blajenkova, Kozhevnikov, & Motes, 2006) and two…

An Analysis of Pre-Service Mathematics Teachers' Performance in Modelling Tasks in Terms of Spatial Visualisation Ability

ERIC Educational Resources Information Center

Tasova, Halil Ibrahim; Delice, Ali

2012-01-01

Mathematical modelling involves mathematical constructions chosen to represent some real world situations and the relationships among them; it is the process of expressing a real world situation mathematically. Visualisation can play a significant role in the development of thinking or understanding mathematical concepts, and also makes abstract…

Visualising nursing data using correspondence analysis.

PubMed

Kokol, Peter; Blažun Vošner, Helena; Železnik, Danica

2016-09-01

Digitally stored, large healthcare datasets enable nurses to use 'big data' techniques and tools in nursing research. Big data is complex and multi-dimensional, so visualisation may be a preferable approach to analyse and understand it. To demonstrate the use of visualisation of big data in a technique called correspondence analysis. In the authors' study, relations among data in a nursing dataset were shown visually in graphs using correspondence analysis. The case presented demonstrates that correspondence analysis is easy to use, shows relations between data visually in a form that is simple to interpret, and can reveal hidden associations between data. Correspondence analysis supports the discovery of new knowledge. Implications for practice Knowledge obtained using correspondence analysis can be transferred immediately into practice or used to foster further research.

Integrated data visualisation: an approach to capture older adults’ wellness

PubMed Central

Wilamowska, Katarzyna; Demiris, George; Thompson, Hilaire

2013-01-01

Informatics tools can help support the health and independence of older adults. In this paper, we present an approach towards integrating health-monitoring data and describe several techniques for the assessment and visualisation of integrated health and well-being of older adults. We present three different visualisation techniques to provide distinct alternatives towards display of the same information, focusing on reducing the cognitive load of data interpretation. We demonstrate the feasibility of integrating health-monitoring information into a comprehensive measure of wellness, while also highlighting the challenges of designing visual displays targeted at multiple user groups. These visual displays of wellness can be incorporated into personal health records and can be an effective support for informed decision-making. PMID:23079025

Students’ planetarium

NASA Astrophysics Data System (ADS)

Brozis, Mirosław; Świderski, Kamil

2018-05-01

Our students built a full-size, mobile planetarium in three weeks. The planetarium was built with commonly available, cheap construction materials. Our priorities were mobility, possibility of quick assembly and reassembly and the students’ availability of materials in every place in the world. The students calculated all the parameters of the planetarium’s construction themselves, chose materials of appropriate technical parameters, built the planetarium’s framework, elaborated the methods of projections and sounding. Taking into consideration the spectators’ comfort they also designed systems of air conditioning and cooling. The project is completely consistent with the STEM and even the STEAM method. The artistic factor of the students’ work was revealed during the visualisation of planetarium projections and its adornment. The final product of their work is a functional planetarium and a manual for its construction.

An analytical approach to the rise velocity of periodic bubble trains in non-Newtonian fluids.

PubMed

Frank, X; Li, H Z; Funfschilling, D

2005-01-01

The present study aims at providing insight into the acceleration mechanism of a bubble chain rising in shear-thinning viscoelastic fluids. The experimental investigation by the Particle Image Velocimetry (PIV), birefringence visualisation and rheological simulation shows that two aspects are central to bubble interactions in such media: the stress creation by the passage of bubbles, and their relaxation due to the fluid's memory forming an evanescent corridor of reduced viscosity. Interactions between bubbles were taken into account mainly through a linear superposition of the stress evolution behind each bubble. An analytical approach together with the rheological consideration was developed to compute the rise velocity of a bubble chain in function of the injection period and bubble volume. The model predictions compare satisfactorily with the experimental investigation.

A scintigraphic study to investigate the potential for altered gut distribution of loperamide from a loperamide-simethicone formulation in man.

PubMed

Connor, A L; Wray, H; Cottrell, J; Wilding, I R

2001-07-01

A loperamide simethicone combination formulation has recently been demonstrated to have significant clinical advantages compared to loperamide alone in the relief of diarrhoea and related symptoms. The product visualisation technique of gamma scintigraphy has been used to investigate the interaction of the formulation with the heterogenous environment of the human gut in a group of 12 healthy volunteers. The results suggest that changes in the intestinal kinetics of loperamide from the combination product, e.g. jejunal coating, could be contributing to the improved efficacy.

Use of back-scatter electron signals to visualise cell/nanowires interactions in vitro and in vivo; frustrated phagocytosis of long fibres in macrophages and compartmentalisation in mesothelial cells in vivo

PubMed Central

2012-01-01

Background Frustrated phagocytosis has been stated as an important factor in the initiation of an inflammatory response after fibre exposure. The length of fibrous structures has been linked to the potential of fibres to induce adverse health effects for at least 40 years. However, we only recently reported for the first time the threshold length for fibre-induced inflammation in the pleural space and we implicated frustrated phagocytosis in the pro-inflammatory effects of long fibres. This study extends the examination of the threshold value for frustrated phagocytosis using well-defined length classes of silver nanowires (AgNW) ranging from 3–28 μm and describes in detail the morphology of frustrated phagocytosis using a novel technique and also describes compartmentalisation of fibres in the pleural space. Methods A novel technique, backscatter scanning electron microscopy (BSE) was used to study frustrated phagocytosis since it provides high-contrast detection of nanowires, allowing clear discrimination between the nanofibres and other cellular features. A human monocyte-derived macrophage cell line THP-1 was used to investigate cell-nanowire interaction in vitro and the parietal pleura, the site of fibre retention after inhalation exposure was chosen to visualise the cell- fibre interaction in vivo after direct pleural installation of AgNWs. Results The length cut-off value for frustrated phagocytosis differs in vitro and in vivo. While in vitro frustrated phagocytosis could be observed with fibres ≥14 μm, in vivo studies showed incomplete uptake at a fibre length of ≥10 μm. Recently we showed that inflammation in the pleural space after intrapleural injection of the same nanofibre panel occurs at a length of ≥5 μm. This onset of inflammation does not correlate with the onset of frustrated phagocytosis as shown in this study, leading to the conclusion that intermediate length fibres fully enclosed within macrophages as well as frustrated phagocytosis are associated with a pro-inflammatory state in the pleural space. We further showed that fibres compartmentalise in the mesothelial cells at the parietal pleura as well as in inflammatory cells in the pleural space. Conclusion BSE is a useful way to clearly distinguish between fibres that are, or are not, membrane-bounded. Using this method we were able to show differences in the threshold length at which frustrated phagocytosis occurred between in vitro and in vivo models. Visualising nanowires in the pleura demonstrated at least 2 compartments – in leukocyte aggregations and in the mesothelium - which may have consequences for long term pathology in the pleural space including mesothelioma. PMID:22929371

FoodMicrobionet: A database for the visualisation and exploration of food bacterial communities based on network analysis.

PubMed

Parente, Eugenio; Cocolin, Luca; De Filippis, Francesca; Zotta, Teresa; Ferrocino, Ilario; O'Sullivan, Orla; Neviani, Erasmo; De Angelis, Maria; Cotter, Paul D; Ercolini, Danilo

2016-02-16

Amplicon targeted high-throughput sequencing has become a popular tool for the culture-independent analysis of microbial communities. Although the data obtained with this approach are portable and the number of sequences available in public databases is increasing, no tool has been developed yet for the analysis and presentation of data obtained in different studies. This work describes an approach for the development of a database for the rapid exploration and analysis of data on food microbial communities. Data from seventeen studies investigating the structure of bacterial communities in dairy, meat, sourdough and fermented vegetable products, obtained by 16S rRNA gene targeted high-throughput sequencing, were collated and analysed using Gephi, a network analysis software. The resulting database, which we named FoodMicrobionet, was used to analyse nodes and network properties and to build an interactive web-based visualisation. The latter allows the visual exploration of the relationships between Operational Taxonomic Units (OTUs) and samples and the identification of core- and sample-specific bacterial communities. It also provides additional search tools and hyperlinks for the rapid selection of food groups and OTUs and for rapid access to external resources (NCBI taxonomy, digital versions of the original articles). Microbial interaction network analysis was carried out using CoNet on datasets extracted from FoodMicrobionet: the complexity of interaction networks was much lower than that found for other bacterial communities (human microbiome, soil and other environments). This may reflect both a bias in the dataset (which was dominated by fermented foods and starter cultures) and the lower complexity of food bacterial communities. Although some technical challenges exist, and are discussed here, the net result is a valuable tool for the exploration of food bacterial communities by the scientific community and food industry. Copyright © 2015. Published by Elsevier B.V.

Ultrasonographically visible hepatic location in clinically normal horses.

PubMed

Johns, I C; Miles, A

2016-06-01

Ultrasound is widely used for evaluating horses with suspected liver dysfunction. Although a change in size is considered suggestive of pathology, no clear guidelines exist to define the hepatic ultrasonographically visible locations (HUVL) in horses. The aim of the study was to describe the HUVL in normal horses and determine whether this is altered by signalment, height, weight and body condition score (BCS). Prospective observational study. Bilateral ultrasonographic evaluation was performed in 58 clinically normal horses with no history of hepatic disease. The most cranial/caudal intercostal spaces (ICS), total number of ICS in which the liver was visualised and the ventral extent of the liver were recorded. Liver was visualised on the right in 56/58 horses (97%), the left in 41/58 (71%) and on both sides in 39/58 (67%). The most cranial ICS was 5 (right) or 4 (left) and the most caudal was 16 (right) or 11 (left). Liver was visualised in ICS 0-11 (right) and ICS 0-5 (left). Liver was not visualised ventral to the costochondral junction. There was no significant effect of sex, breed, height, weight or BCS on HUVL. Liver was visible in significantly fewer ICS on the right in horses aged 24 years and older (median ICS 3.5) compared with younger horses (median ICS 7; P = 0.016). These findings suggest that the liver should be consistently visualised on the right side, but absence of ultrasonographically visible liver on the left is unlikely to be clinically relevant. Liver dimensions may be decreased in older horses. © 2016 Australian Veterinary Association.

The Use of the Visualisation of Multidimensional Data Using PCA to Evaluate Possibilities of the Division of Coal Samples Space Due to their Suitability for Fluidised Gasification

NASA Astrophysics Data System (ADS)

Jamróz, Dariusz; Niedoba, Tomasz; Surowiak, Agnieszka; Tumidajski, Tadeusz

2016-09-01

Methods serving to visualise multidimensional data through the transformation of multidimensional space into two-dimensional space, enable to present the multidimensional data on the computer screen. Thanks to this, qualitative analysis of this data can be performed in the most natural way for humans, through the sense of sight. An example of such a method of multidimensional data visualisation is PCA (principal component analysis) method. This method was used in this work to present and analyse a set of seven-dimensional data (selected seven properties) describing coal samples obtained from Janina and Wieczorek coal mines. Coal from these mines was previously subjected to separation by means of a laboratory ring jig, consisting of ten rings. With 5 layers of both types of coal (with 2 rings each) were obtained in this way. It was decided to check if the method of multidimensional data visualisation enables to divide the space of such divided samples into areas with different suitability for the fluidised gasification process. To that end, the card of technological suitability of coal was used (Sobolewski et al., 2012; 2013), in which key, relevant and additional parameters, having effect on the gasification process, were described. As a result of analyses, it was stated that effective determination of coal samples suitability for the on-surface gasification process in a fluidised reactor is possible. The PCA method enables the visualisation of the optimal subspace containing the set requirements concerning the properties of coals intended for this process.

Czech Registry of Monoclonal Gammopathies - Technical Solution, Data Collection and Visualisation.

PubMed

Brozova, L; Schwarz, D; Snabl, I; Kalina, J; Pavlickova, B; Komenda, M; Jarkovský, J; Němec, P; Horinek, D; Stefanikova, Z; Pour, L; Hájek, R; Maisnar, V

2017-01-01

The Registry of Monoclonal Gammopathies (RMG) was established by the Czech Myeloma Group in 2007. RMG is a registry designed for the collection of clinical data concerning diagnosis, treatment, treatment results and survival of patients with monoclonal gammopathies. Data on patients with monoclonal gammopathy of undetermined significance (MGUS), Waldenström macroglobulinaemia (WM), multiple myeloma (MM) or primary AL ("amyloid light-chain") amyloidosis are collected in the registry. Nineteen Czech centres and four Slovak centres currently contribute to the registry. The registry currently contains records on more than 5,000 patients with MM, almost 3,000 patients with MGUS, 170 patients with WM and 26 patients with primary AL amyloidosis, i.e. more than 8,000 records on patients with monoclonal gammopathies altogether. This paper describes technology employed for the collection, storage and subsequent online visualisation of data. The CLADE-IS platform is introduced as a new system for the collection and storage of data from the registry. The form structure and functions of the new system are described for all diagnoses in general; these functions facilitate data entry to the registry and minimise the error rate in data. Publicly available online visualisations of data on patients with MGUS, WM, MM or primary AL amyloidosis from all Czech or Slovak centres are introduced, together with authenticated visualisations of data on patients with MM from selected centres. The RMG represents a data basis that makes it possible to monitor the disease course in patients with monoclonal gammopathies on the population level.Key words: Registry of Monoclonal Gammopathies - RMG - registries - monoclonal gammopathies - CLADE-IS - data visualisation - database.

The use of interactive graphical maps for browsing medical/health Internet information resources

PubMed Central

Boulos, Maged N Kamel

2003-01-01

As online information portals accumulate metadata descriptions of Web resources, it becomes necessary to develop effective ways for visualising and navigating the resultant huge metadata repositories as well as the different semantic relationships and attributes of described Web resources. Graphical maps provide a good method to visualise, understand and navigate a world that is too large and complex to be seen directly like the Web. Several examples of maps designed as a navigational aid for Web resources are presented in this review with an emphasis on maps of medical and health-related resources. The latter include HealthCyberMap maps , which can be classified as conceptual information space maps, and the very abstract and geometric Visual Net maps of PubMed (for demos). Information resources can be also organised and navigated based on their geographic attributes. Some of the maps presented in this review use a Kohonen Self-Organising Map algorithm, and only HealthCyberMap uses a Geographic Information System to classify Web resource data and render the maps. Maps based on familiar metaphors taken from users' everyday life are much easier to understand. Associative and pictorial map icons that enable instant recognition and comprehension are preferred to geometric ones and are key to successful maps for browsing medical/health Internet information resources. PMID:12556244

JHelioviewer. Time-dependent 3D visualisation of solar and heliospheric data

NASA Astrophysics Data System (ADS)

Müller, D.; Nicula, B.; Felix, S.; Verstringe, F.; Bourgoignie, B.; Csillaghy, A.; Berghmans, D.; Jiggens, P.; García-Ortiz, J. P.; Ireland, J.; Zahniy, S.; Fleck, B.

2017-09-01

Context. Solar observatories are providing the world-wide community with a wealth of data, covering wide time ranges (e.g. Solar and Heliospheric Observatory, SOHO), multiple viewpoints (Solar TErrestrial RElations Observatory, STEREO), and returning large amounts of data (Solar Dynamics Observatory, SDO). In particular, the large volume of SDO data presents challenges; the data are available only from a few repositories, and full-disk, full-cadence data for reasonable durations of scientific interest are difficult to download, due to their size and the download rates available to most users. From a scientist's perspective this poses three problems: accessing, browsing, and finding interesting data as efficiently as possible. Aims: To address these challenges, we have developed JHelioviewer, a visualisation tool for solar data based on the JPEG 2000 compression standard and part of the open source ESA/NASA Helioviewer Project. Since the first release of JHelioviewer in 2009, the scientific functionality of the software has been extended significantly, and the objective of this paper is to highlight these improvements. Methods: The JPEG 2000 standard offers useful new features that facilitate the dissemination and analysis of high-resolution image data and offers a solution to the challenge of efficiently browsing petabyte-scale image archives. The JHelioviewer software is open source, platform independent, and extendable via a plug-in architecture. Results: With JHelioviewer, users can visualise the Sun for any time period between September 1991 and today; they can perform basic image processing in real time, track features on the Sun, and interactively overlay magnetic field extrapolations. The software integrates solar event data and a timeline display. Once an interesting event has been identified, science quality data can be accessed for in-depth analysis. As a first step towards supporting science planning of the upcoming Solar Orbiter mission, JHelioviewer offers a virtual camera model that enables users to set the vantage point to the location of a spacecraft or celestial body at any given time.

Automated drumlin shape and volume estimation using high resolution LiDAR imagery (Curvature Based Relief Separation): A test from the Wadena Drumlin Field, Minnesota

NASA Astrophysics Data System (ADS)

Yu, Peter; Eyles, Nick; Sookhan, Shane

2015-10-01

Resolving the origin(s) of drumlins and related megaridges in areas of megascale glacial lineations (MSGL) left by paleo-ice sheets is critical to understanding how ancient ice sheets interacted with their sediment beds. MSGL is now linked with fast-flowing ice streams but there is a broad range of erosional and depositional models. Further progress is reliant on constraining fluxes of subglacial sediment at the ice sheet base which in turn is dependent on morphological data such as landform shape and elongation and most importantly landform volume. Past practice in determining shape has employed a broad range of geomorphological methods from strictly visualisation techniques to more complex semi-automated and automated drumlin extraction methods. This paper reviews and builds on currently available visualisation, semi-automated and automated extraction methods and presents a new, Curvature Based Relief Separation (CBRS) technique; for drumlin mapping. This uses curvature analysis to generate a base level from which topography can be normalized and drumlin volume can be derived. This methodology is tested using a high resolution (3 m) LiDAR elevation dataset from the Wadena Drumlin Field, Minnesota, USA, which was constructed by the Wadena Lobe of the Laurentide Ice Sheet ca. 20,000 years ago and which as a whole contains 2000 drumlins across an area of 7500 km2. This analysis demonstrates that CBRS provides an objective and robust procedure for automated drumlin extraction. There is strong agreement with manually selected landforms but the method is also capable of resolving features that were not detectable manually thereby considerably expanding the known population of streamlined landforms. CBRS provides an effective automatic method for visualisation of large areas of the streamlined beds of former ice sheets and for modelling sediment fluxes below ice sheets.

WebGL for Rosetta Science Planning

NASA Astrophysics Data System (ADS)

Schmidt, Albrecht; Völk, Stefan; Grieger, Björn

2013-04-01

Rosetta is a mission of the European Space Agency (ESA) to rendez-vous with comet Churyumov-Gerasimenko in 2014. The trajectory and operations of the mission are particularly complex, have many free parameters and are novel to the community. To support science planning, communicate operational ideas and disseminate operational scenarios to the scientific community, the science ground segment makes use of Web-based visualisation technologies. Using the recent standard WebGL, static pages of time-dependent three-dimensional views of the spacecraft and the field-of-views of the instruments are generated, directly from the operational files. These can then be viewed in modern Web browsers for understanding or verification, be analysed and correlated with other studies. Variable timesteps make it possible to provide both overviews and detailed animated scenes. The technical challenges that are particular to Web-based environments include: (1) In traditional OpenGL, is much easier to compute needed data on demand since the visualisation runs natively on a usually quite powerful computer. In WebGL application, since requests for additional data have to be passed through a Web server, they are more complex and also require a more complex infrastructure. (2) The volume of data that can be kept in a browser environment is limited and has to be transferred over often slow network links. Thus, careful design and reduction of data is required. (3) Although browser support for WebGL has improved since the authors started using it, it is often not well supported on mobile and small devices. (4) Web browsers often only support limited end user interactions with a mouse or keyboards. While some of the challenges can be expected to become less important as technological progress continues, others seem to be more inherent to the approach. On the positive side, the authors' experiences include: (1) low threshold in the community to using the visualisations, (2), thus, cooperative use of the products, and (3) good and still improving tool and library support.

Learning from a New Learning Landscape: Visualisation of Location Sensing Data in the Augustine House Experiment

ERIC Educational Resources Information Center

Peng, Chengzhi

2013-01-01

Funded by the UK JISC Institutional Innovation Programme, the Augustine House Experiment sets out to investigate how the location sensing data collected over students' uses of the iBorrow notebooks can be visualised to reveal aspects of the new learning landscape during a 1-week sensing period. Indoor real-time location sensing technologies are…

Change the Way Your Pupils Learn by Practising Creative Thinking and Visualisation

ERIC Educational Resources Information Center

Statham, Mick

2014-01-01

In a previous article (2014), this author outlined the practical use of visualisation as a way of starting lessons. The purpose of this is to create interest, hold attention, and provide some mental experience of the conceptual learning to follow. In this way, links can be created between the teaching activity in the first few minutes of the…

Designing Spatial Visualisation Tasks for Middle School Students with a 3D Modelling Software: An Instrumental Approach

ERIC Educational Resources Information Center

Turgut, Melih; Uygan, Candas

2015-01-01

In this work, certain task designs to enhance middle school students' spatial visualisation ability, in the context of an instrumental approach, have been developed. 3D modelling software, SketchUp®, was used. In the design process, software tools were focused on and, thereafter, the aim was to interpret the instrumental genesis and spatial…

D Modelling and Interactive Web-Based Visualization of Cultural Heritage Objects

NASA Astrophysics Data System (ADS)

Koeva, M. N.

2016-06-01

Nowadays, there are rapid developments in the fields of photogrammetry, laser scanning, computer vision and robotics, together aiming to provide highly accurate 3D data that is useful for various applications. In recent years, various LiDAR and image-based techniques have been investigated for 3D modelling because of their opportunities for fast and accurate model generation. For cultural heritage preservation and the representation of objects that are important for tourism and their interactive visualization, 3D models are highly effective and intuitive for present-day users who have stringent requirements and high expectations. Depending on the complexity of the objects for the specific case, various technological methods can be applied. The selected objects in this particular research are located in Bulgaria - a country with thousands of years of history and cultural heritage dating back to ancient civilizations. This motivates the preservation, visualisation and recreation of undoubtedly valuable historical and architectural objects and places, which has always been a serious challenge for specialists in the field of cultural heritage. In the present research, comparative analyses regarding principles and technological processes needed for 3D modelling and visualization are presented. The recent problems, efforts and developments in interactive representation of precious objects and places in Bulgaria are presented. Three technologies based on real projects are described: (1) image-based modelling using a non-metric hand-held camera; (2) 3D visualization based on spherical panoramic images; (3) and 3D geometric and photorealistic modelling based on architectural CAD drawings. Their suitability for web-based visualization are demonstrated and compared. Moreover the possibilities for integration with additional information such as interactive maps, satellite imagery, sound, video and specific information for the objects are described. This comparative study discusses the advantages and disadvantages of these three approaches and their integration in multiple domains, such as web-based 3D city modelling, tourism and architectural 3D visualization. It was concluded that image-based modelling and panoramic visualisation are simple, fast and effective techniques suitable for simultaneous virtual representation of many objects. However, additional measurements or CAD information will be beneficial for obtaining higher accuracy.

To signal or not to signal? Chemical communication by urine-borne signals mirrors sexual conflict in crayfish

PubMed Central

2010-01-01

Background Sexual selection theory predicts that females, being the limiting sex, invest less in courtship signals than males. However, when chemical signals are involved it is often the female that initiates mating by producing stimuli that inform about sex and/or receptivity. This apparent contradiction has been discussed in the literature as 'the female pheromone fallacy'. Because the release of chemical stimuli may not have evolved to elicit the male's courtship response, whether these female stimuli represent signals remains an open question. Using techniques to visualise and block release of urine, we studied the role of urine signals during fighting and mating interactions of crayfish (Pacifastacus leniusculus). Test individuals were blindfolded to exclude visual disturbance from dye release and artificial urine introduction. Results Staged female-male pairings during the reproductive season often resulted in male mating attempts. Blocking female urine release in such pairings prevented any male courtship behaviour. Artificial introduction of female urine re-established male mating attempts. Urine visualisation showed that female urine release coincides with aggressive behaviours but not with female submissive behaviour in reproductive interactions as well as in intersexual and intrasexual fights. In reproductive interactions, females predominately released urine during precopulatory aggression; males subsequently released significantly less urine during mating than in fights. Conclusions Urine-blocking experiments demonstrate that female urine contains sex-specific components that elicit male mating behaviour. The coincidence of chemical signalling and aggressive behaviour in both females and males suggests that urine release has evolved as an aggressive signal in both sexes of crayfish. By limiting urine release to aggressive behaviours in reproductive interactions females challenge their potential mating partners at the same time as they trigger a sexual response. These double messages should favour stronger males that are able to overcome the resistance of the female. We conclude that the difference between the sexes in disclosing urine-borne information reflects their conflicting interests in reproduction. Males discontinue aggressive urine signalling in order to increase their chances of mating. Females resume urine signalling in connection with aggressive behaviour, potentially repelling low quality or sexually inactive males while favouring reproduction with high quality males. PMID:20353555

Dr TIM: Ray-tracer TIM, with additional specialist scientific capabilities

NASA Astrophysics Data System (ADS)

Oxburgh, Stephen; Tyc, Tomáš; Courtial, Johannes

2014-03-01

We describe several extensions to TIM, a raytracing program for ray-optics research. These include relativistic raytracing; simulation of the external appearance of Eaton lenses, Luneburg lenses and generalised focusing gradient-index lens (GGRIN) lenses, which are types of perfect imaging devices; raytracing through interfaces between spaces with different optical metrics; and refraction with generalised confocal lenslet arrays, which are particularly versatile METATOYs. Catalogue identifier: AEKY_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEKY_v2_0.html Program obtainable from: CPC Program Library, Queen’s University, Belfast, N. Ireland Licencing provisions: GNU General Public License No. of lines in distributed program, including test data, etc.: 106905 No. of bytes in distributed program, including test data, etc.: 6327715 Distribution format: tar.gz Programming language: Java. Computer: Any computer capable of running the Java Virtual Machine (JVM) 1.6. Operating system: Any, developed under Mac OS X Version 10.6 and 10.8.3. RAM: Typically 130 MB (interactive version running under Mac OS X Version 10.8.3) Classification: 14, 18. Catalogue identifier of previous version: AEKY_v1_0 Journal reference of previous version: Comput. Phys. Comm. 183(2012)711 External routines: JAMA [1] (source code included) Does the new version supersede the previous version?: Yes Nature of problem: Visualisation of scenes that include scene objects that create wave-optically forbidden light-ray fields. Solution method: Ray tracing. Reasons for new version: Significant extension of the capabilities (see Summary of revisions), as demanded by our research. Summary of revisions: Added capabilities include the simulation of different types of camera moving at relativistic speeds relative to the scene; visualisation of the external appearance of generalised focusing gradient-index (GGRIN) lenses, including Maxwell fisheye, Eaton and Luneburg lenses; calculation of refraction at the interface between spaces with different optical metrics; and handling of generalised confocal lenslet arrays (gCLAs), a new type of METATOY. Unusual features: Specifically designed to visualise wave-optically forbidden light-ray fields; can visualise ray trajectories and geometric optic transformations; can simulate photos taken with different types of camera moving at relativistic speeds, interfaces between spaces with different optical metrics, the view through METATOYs and generalised focusing gradient-index lenses; can create anaglyphs (for viewing with coloured “3D glasses”), HDMI-1.4a standard 3D images, and random-dot autostereograms of the scene; integrable into web pages. Running time: Problem-dependent; typically seconds for a simple scene. References: [1] JAMA: A Java Matrix Package, http://math.nist.gov/javanumerics/jama/

PHENOPSIS DB: an Information System for Arabidopsis thaliana phenotypic data in an environmental context

PubMed Central

2011-01-01

Background Renewed interest in plant × environment interactions has risen in the post-genomic era. In this context, high-throughput phenotyping platforms have been developed to create reproducible environmental scenarios in which the phenotypic responses of multiple genotypes can be analysed in a reproducible way. These platforms benefit hugely from the development of suitable databases for storage, sharing and analysis of the large amount of data collected. In the model plant Arabidopsis thaliana, most databases available to the scientific community contain data related to genetic and molecular biology and are characterised by an inadequacy in the description of plant developmental stages and experimental metadata such as environmental conditions. Our goal was to develop a comprehensive information system for sharing of the data collected in PHENOPSIS, an automated platform for Arabidopsis thaliana phenotyping, with the scientific community. Description PHENOPSIS DB is a publicly available (URL: http://bioweb.supagro.inra.fr/phenopsis/) information system developed for storage, browsing and sharing of online data generated by the PHENOPSIS platform and offline data collected by experimenters and experimental metadata. It provides modules coupled to a Web interface for (i) the visualisation of environmental data of an experiment, (ii) the visualisation and statistical analysis of phenotypic data, and (iii) the analysis of Arabidopsis thaliana plant images. Conclusions Firstly, data stored in the PHENOPSIS DB are of interest to the Arabidopsis thaliana community, particularly in allowing phenotypic meta-analyses directly linked to environmental conditions on which publications are still scarce. Secondly, data or image analysis modules can be downloaded from the Web interface for direct usage or as the basis for modifications according to new requirements. Finally, the structure of PHENOPSIS DB provides a useful template for the development of other similar databases related to genotype × environment interactions. PMID:21554668

Fast multi-core based multimodal registration of 2D cross-sections and 3D datasets.

PubMed

Scharfe, Michael; Pielot, Rainer; Schreiber, Falk

2010-01-11

Solving bioinformatics tasks often requires extensive computational power. Recent trends in processor architecture combine multiple cores into a single chip to improve overall performance. The Cell Broadband Engine (CBE), a heterogeneous multi-core processor, provides power-efficient and cost-effective high-performance computing. One application area is image analysis and visualisation, in particular registration of 2D cross-sections into 3D image datasets. Such techniques can be used to put different image modalities into spatial correspondence, for example, 2D images of histological cuts into morphological 3D frameworks. We evaluate the CBE-driven PlayStation 3 as a high performance, cost-effective computing platform by adapting a multimodal alignment procedure to several characteristic hardware properties. The optimisations are based on partitioning, vectorisation, branch reducing and loop unrolling techniques with special attention to 32-bit multiplies and limited local storage on the computing units. We show how a typical image analysis and visualisation problem, the multimodal registration of 2D cross-sections and 3D datasets, benefits from the multi-core based implementation of the alignment algorithm. We discuss several CBE-based optimisation methods and compare our results to standard solutions. More information and the source code are available from http://cbe.ipk-gatersleben.de. The results demonstrate that the CBE processor in a PlayStation 3 accelerates computational intensive multimodal registration, which is of great importance in biological/medical image processing. The PlayStation 3 as a low cost CBE-based platform offers an efficient option to conventional hardware to solve computational problems in image processing and bioinformatics.

From Architectural Photogrammetry Toward Digital Architectural Heritage Education

NASA Astrophysics Data System (ADS)

Baik, A.; Alitany, A.

2018-05-01

This paper considers the potential of using the documentation approach proposed for the heritage buildings in Historic Jeddah, Saudi Arabia (as a case study) by using the close-range photogrammetry / the Architectural Photogrammetry techniques as a new academic experiment in digital architectural heritage education. Moreover, different than most of engineering educational techniques related to architecture education, this paper will be focusing on the 3-D data acquisition technology as a tool to document and to learn the principals of the digital architectural heritage documentation. The objective of this research is to integrate the 3-D modelling and visualisation knowledge for the purposes of identifying, designing and evaluating an effective engineering educational experiment. Furthermore, the students will learn and understand the characteristics of the historical building while learning more advanced 3-D modelling and visualisation techniques. It can be argued that many of these technologies alone are difficult to improve the education; therefore, it is important to integrate them in an educational framework. This should be in line with the educational ethos of the academic discipline. Recently, a number of these technologies and methods have been effectively used in education sectors and other purposes; such as in the virtual museum. However, these methods are not directly coincided with the traditional education and teaching architecture. This research will be introduced the proposed approach as a new academic experiment in the architecture education sector. The new teaching approach will be based on the Architectural Photogrammetry to provide semantically rich models. The academic experiment will require students to have suitable knowledge in both Photogrammetry applications to engage with the process.

Imagining Technology-Enhanced Learning with Heritage Artefacts: Teacher-Perceived Potential of 2D and 3D Heritage Site Visualisations

ERIC Educational Resources Information Center

Lackovic, Natasa; Crook, Charles; Cobb, Sue; Shalloe, Sally; D'Cruz, Mirabelle

2015-01-01

Background: There is much to be realised in the educational potential of national and world heritage sites. Such sites need to be supported in sharing their resources with a wide and international public, especially within formal education. Two-dimensional (2D) and three-dimensional (3D) heritage site visualisations could serve this need. Our…

Visual Analysis of Social Networks in a Counter-Insurgency Context

DTIC Science & Technology

2011-06-01

Batagelj and Mrvar 2003] specifically focus on the analysis and visualisation of extremely large networks. Moreover, on top of these data about the...and behavioral components of a complex conflict ecosystem, SpringSim: 23. Batagelj , V. & Mrvar , A., (2003), Pajek - analysis and visualisation of...information regarding network patterns and structures, no spatial information is usually encoded. This is despite the fact that already Wellman [ 1996

Right adrenal vein: comparison between adaptive statistical iterative reconstruction and model-based iterative reconstruction.

PubMed

Noda, Y; Goshima, S; Nagata, S; Miyoshi, T; Kawada, H; Kawai, N; Tanahashi, Y; Matsuo, M

2018-06-01

To compare right adrenal vein (RAV) visualisation and contrast enhancement degree on adrenal venous phase images reconstructed using adaptive statistical iterative reconstruction (ASiR) and model-based iterative reconstruction (MBIR) techniques. This prospective study was approved by the institutional review board, and written informed consent was waived. Fifty-seven consecutive patients who underwent adrenal venous phase imaging were enrolled. The same raw data were reconstructed using ASiR 40% and MBIR. The expert and beginner independently reviewed computed tomography (CT) images. RAV visualisation rates, background noise, and CT attenuation of the RAV, right adrenal gland, inferior vena cava (IVC), hepatic vein, and bilateral renal veins were compared between the two reconstruction techniques. RAV visualisation rates were higher with MBIR than with ASiR (95% versus 88%, p=0.13 in expert and 93% versus 75%, p=0.002 in beginner, respectively). RAV visualisation confidence ratings with MBIR were significantly greater than with ASiR (p<0.0001, both in the beginner and the expert). The mean background noise was significantly lower with MBIR than with ASiR (p<0.0001). Mean CT attenuation values of the RAV, right adrenal gland, IVC, and hepatic vein were comparable between the two techniques (p=0.12-0.91). Mean CT attenuation values of the bilateral renal veins were significantly higher with MBIR than with ASiR (p=0.0013 and 0.02). Reconstruction of adrenal venous phase images using MBIR significantly reduces background noise, leading to an improvement in the RAV visualisation compared with ASiR. Copyright © 2018 The Royal College of Radiologists. Published by Elsevier Ltd. All rights reserved.

Self-assembling complexes of quantum dots and scFv antibodies for cancer cell targeting and imaging.

PubMed

Zdobnova, Tatiana A; Stremovskiy, Oleg A; Lebedenko, Ekaterina N; Deyev, Sergey M

2012-01-01

Semiconductor quantum dots represent a novel class of fluorophores with unique physical and chemical properties which could enable a remarkable broadening of the current applications of fluorescent imaging and optical diagnostics. Complexes of quantum dots and antibodies are promising visualising agents for fluorescent detection of selective biomarkers overexpressed in tumor tissues. Here we describe the construction of self-assembling fluorescent complexes of quantum dots and anti-HER1 or anti-HER2/neu scFv antibodies and their interactions with cultured tumor cells. A binding strategy based on a very specific non-covalent interaction between two proteins, barnase and barstar, was used to connect quantum dots and the targeting antibodies. Such a strategy allows combining the targeting and visualization functions simply by varying the corresponding modules of the fluorescent complex.

Self-Assembling Complexes of Quantum Dots and scFv Antibodies for Cancer Cell Targeting and Imaging

PubMed Central

Zdobnova, Tatiana A.; Stremovskiy, Oleg A.; Lebedenko, Ekaterina N.; Deyev, Sergey M.

2012-01-01

Semiconductor quantum dots represent a novel class of fluorophores with unique physical and chemical properties which could enable a remarkable broadening of the current applications of fluorescent imaging and optical diagnostics. Complexes of quantum dots and antibodies are promising visualising agents for fluorescent detection of selective biomarkers overexpressed in tumor tissues. Here we describe the construction of self-assembling fluorescent complexes of quantum dots and anti-HER1 or anti-HER2/neu scFv antibodies and their interactions with cultured tumor cells. A binding strategy based on a very specific non-covalent interaction between two proteins, barnase and barstar, was used to connect quantum dots and the targeting antibodies. Such a strategy allows combining the targeting and visualization functions simply by varying the corresponding modules of the fluorescent complex. PMID:23133578

Fluctuating Finite Element Analysis (FFEA): A continuum mechanics software tool for mesoscale simulation of biomolecules.

PubMed

Solernou, Albert; Hanson, Benjamin S; Richardson, Robin A; Welch, Robert; Read, Daniel J; Harlen, Oliver G; Harris, Sarah A

2018-03-01

Fluctuating Finite Element Analysis (FFEA) is a software package designed to perform continuum mechanics simulations of proteins and other globular macromolecules. It combines conventional finite element methods with stochastic thermal noise, and is appropriate for simulations of large proteins and protein complexes at the mesoscale (length-scales in the range of 5 nm to 1 μm), where there is currently a paucity of modelling tools. It requires 3D volumetric information as input, which can be low resolution structural information such as cryo-electron tomography (cryo-ET) maps or much higher resolution atomistic co-ordinates from which volumetric information can be extracted. In this article we introduce our open source software package for performing FFEA simulations which we have released under a GPLv3 license. The software package includes a C ++ implementation of FFEA, together with tools to assist the user to set up the system from Electron Microscopy Data Bank (EMDB) or Protein Data Bank (PDB) data files. We also provide a PyMOL plugin to perform basic visualisation and additional Python tools for the analysis of FFEA simulation trajectories. This manuscript provides a basic background to the FFEA method, describing the implementation of the core mechanical model and how intermolecular interactions and the solvent environment are included within this framework. We provide prospective FFEA users with a practical overview of how to set up an FFEA simulation with reference to our publicly available online tutorials and manuals that accompany this first release of the package.

Modelling fungal growth in heterogeneous soil: analyses of the effect of soil physical structure on fungal community dynamics

NASA Astrophysics Data System (ADS)

Falconer, R.; Radoslow, P.; Grinev, D.; Otten, W.

2009-04-01

Fungi play a pivital role in soil ecosystems contributing to plant productivity. The underlying soil physical and biological processes responsible for community dynamics are interrelated and, at present, poorly understood. If these complex processes can be understood then this knowledge can be managed with an aim to providing more sustainable agriculture. Our understanding of microbial dynamics in soil has long been hampered by a lack of a theoretical framework and difficulties in observation and quantification. We will demonstrate how the spatial and temporal dynamics of fungi in soil can be understood by linking mathematical modelling with novel techniques that visualise the complex structure of the soil. The combination of these techniques and mathematical models opens up new possibilities to understand how the physical structure of soil affects fungal colony dynamics and also how fungal dynamics affect soil structure. We will quantify, using X ray tomography, soil structure for a range of artificially prepared microcosms. We characterise the soil structures using soil metrics such as porosity, fractal dimension, and the connectivity of the pore volume. Furthermore we will use the individual based fungal colony growth model of Falconer et al. 2005, which is based on the physiological processes of fungi, to assess the effect of soil structure on microbial dynamics by qualifying biomass abundances and distributions. We demonstrate how soil structure can critically affect fungal species interactions with consequences for biological control and fungal biodiversity.

Human and Robotic Mission to Small Bodies: Mapping, Planning and Exploration

NASA Technical Reports Server (NTRS)

Neffian, Ara V.; Bellerose, Julie; Beyer, Ross A.; Archinal, Brent; Edwards, Laurence; Lee, Pascal; Colaprete, Anthony; Fong, Terry

2013-01-01

This study investigates the requirements, performs a gap analysis and makes a set of recommendations for mapping products and exploration tools required to support operations and scientific discovery for near- term and future NASA missions to small bodies. The mapping products and their requirements are based on the analysis of current mission scenarios (rendezvous, docking, and sample return) and recommendations made by the NEA Users Team (NUT) in the framework of human exploration. The mapping products that sat- isfy operational, scienti c, and public outreach goals include topography, images, albedo, gravity, mass, density, subsurface radar, mineralogical and thermal maps. The gap analysis points to a need for incremental generation of mapping products from low (flyby) to high-resolution data needed for anchoring and docking, real-time spatial data processing for hazard avoidance and astronaut or robot localization in low gravity, high dynamic environments, and motivates a standard for coordinate reference systems capable of describing irregular body shapes. Another aspect investigated in this study is the set of requirements and the gap analysis for exploration tools that support visualization and simulation of operational conditions including soil interactions, environment dynamics, and communications coverage. Building robust, usable data sets and visualisation/simulation tools is the best way for mission designers and simulators to make correct decisions for future missions. In the near term, it is the most useful way to begin building capabilities for small body exploration without needing to commit to specific mission architectures.

The NOvA software testing framework

NASA Astrophysics Data System (ADS)

Tamsett, M.; C Group

2015-12-01

The NOvA experiment at Fermilab is a long-baseline neutrino experiment designed to study vε appearance in a vμ beam. NOvA has already produced more than one million Monte Carlo and detector generated files amounting to more than 1 PB in size. This data is divided between a number of parallel streams such as far and near detector beam spills, cosmic ray backgrounds, a number of data-driven triggers and over 20 different Monte Carlo configurations. Each of these data streams must be processed through the appropriate steps of the rapidly evolving, multi-tiered, interdependent NOvA software framework. In total there are greater than 12 individual software tiers, each of which performs a different function and can be configured differently depending on the input stream. In order to regularly test and validate that all of these software stages are working correctly NOvA has designed a powerful, modular testing framework that enables detailed validation and benchmarking to be performed in a fast, efficient and accessible way with minimal expert knowledge. The core of this system is a novel series of python modules which wrap, monitor and handle the underlying C++ software framework and then report the results to a slick front-end web-based interface. This interface utilises modern, cross-platform, visualisation libraries to render the test results in a meaningful way. They are fast and flexible, allowing for the easy addition of new tests and datasets. In total upwards of 14 individual streams are regularly tested amounting to over 70 individual software processes, producing over 25 GB of output files. The rigour enforced through this flexible testing framework enables NOvA to rapidly verify configurations, results and software and thus ensure that data is available for physics analysis in a timely and robust manner.

Multinational Experiment 7: Situation Awareness Technologies Used in Locked Shield 2012

DTIC Science & Technology

2013-07-08

Teams in coordinating efforts to repel the attacks and to have a clear overall situational awareness at all times. Different kinds of visualisation ...experts Video/ Audio records labourious to follow and analyze Capture information in textual form Domain experts are too busy mitigating the damages to...Centers to tag information to produce more meaningful visualisations and to provide feedback to reporters Workflows, terminology, requirements for Cyber

Comparative analysis of 2D spatio-temporal visualisation techniques for the pulsed THz-radiation field using an electro-optic crystal

NASA Astrophysics Data System (ADS)

Ushakov, A. A.; Chizhov, P. A.; Bukin, V. V.; Garnov, S. V.; Savel'ev, A. B.

2018-05-01

Two 2D techniques for visualising the field of pulsed THz radiation ('shadow' and 'interferometric'), which are based on the linear electro-optical effect with application of a ZnTe detector crystal 1 × 1 cm in size, are compared. The noise level and dynamic range for the aforementioned techniques are analysed and their applicability limits are discussed.

The safety profile of a retrospective Accessory Postero-Lateral hind foot portal: the risk of sural nerve damage during visualisation of the Achilles tendon insertion.

PubMed

Carmont, M R; Stroud, R; Bjorndalen, H; Crowther, J; Ribbans, W J; Griffin, D

2012-06-01

The Accessory Postero-Lateral (AccPL) portal has recently been described to improve the visualisation for the endoscopic debridement of Haglund's tubercle. The safety of using this portal has been considered previously for posterior ankle arthroscopy. We performed a study to determine the proximity of the AccPL portal to the sural nerve. We compared the distances between AccPL and PL portals to the sural nerve in 17 cadaveric specimens. The AccPL portal was significantly closer (mean 12.0mm, range 6-19 mm, SD=3.64) to the sural nerve than the PL portal (mean 14.1mm, range 11-18 mm, SD=2.34) (t(16)=-2.34, p=0.03). In two cases the sural nerve was in contact with the clip but on close inspection, the nerve had not been damaged in any of the specimens. We conclude that the AccPL portal is a safe method to allow visualisation during endoscopic debridement of the Achilles tendon insertion. We also recommend that the portal is used for visualisation rather than instrumentation. Copyright © 2011 European Foot and Ankle Society. Published by Elsevier Ltd. All rights reserved.

Science Plan Visualisation for Rosetta

NASA Astrophysics Data System (ADS)

Schmidt, A.; Grieger, B.; Völk, S.

2013-12-01

Rosetta is a mission of the European Space Agency (ESA) to rendez-vous with comet Churyumov-Gerasimenko in mid-2014. The trajectories and their corresponding operations are flexible and particularly complex. To make informed decisions among the many free parameters novel ways to communicate operations to the community have been explored. To support science planning by communicating operational ideas and disseminating operational scenarios, the science ground segment makes use of Web-based visualisation technologies. To keep the threshold to analysing operations proposals as low as possible, various implementation techniques have been investigated. An important goal was to use the Web to make the content as accessible as possible. By adopting the recent standard WebGL and generating static pages of time-dependent three-dimensional views of the spacecraft as well as the corresponding field-of-views of instruments, directly from the operational and for-study files, users are given the opportunity to explore interactively in their Web browsers what is being proposed in addition to using the traditional file products and analysing them in detail. The scenes and animations can be viewed in any modern Web browser and be combined with other analyses. This is to facilitate verification and cross-validation of complex products, often done by comparing different independent analyses and studies. By providing different timesteps in animations, it is possible to focus on long-term planning or short-term planning without distracting the user from the essentials. This is particularly important since the information that can be displayed in a Web browser is somewhat related to data volume that can be transferred across the wire. In Web browsers, it is more challenging to do numerical calculations on demand. Since requests for additional data have to be passed through a Web server, they are more complex and also require a more complex infrastructure. The volume of data that can be kept in a browser environment is limited and might have to be transferred over often slow network links. Thus, careful design and reduction of data is required. Regarding user interaction, Web browsers are often limited to a mouse and keyboards. In terms of benefits, the threshold and turn-around times for discussing operational ideas by using the visualisation techniques described here are lowered. An additional benefit of the approach was the cooperative use of products by distributed users which resulted in higher-quality software and data by incorporating more feedback than what would usually have been available.

Interactive (statistical) visualisation and exploration of a billion objects with vaex

NASA Astrophysics Data System (ADS)

Breddels, M. A.

2017-06-01

With new catalogues arriving such as the Gaia DR1, containing more than a billion objects, new methods of handling and visualizing these data volumes are needed. We show that by calculating statistics on a regular (N-dimensional) grid, visualizations of a billion objects can be done within a second on a modern desktop computer. This is achieved using memory mapping of hdf5 files together with a simple binning algorithm, which are part of a Python library called vaex. This enables efficient exploration or large datasets interactively, making science exploration of large catalogues feasible. Vaex is a Python library and an application, which allows for interactive exploration and visualization. The motivation for developing vaex is the catalogue of the Gaia satellite, however, vaex can also be used on SPH or N-body simulations, any other (future) catalogues such as SDSS, Pan-STARRS, LSST, etc. or other tabular data. The homepage for vaex is http://vaex.astro.rug.nl.

3-D interactive visualisation tools for Hi spectral line imaging

NASA Astrophysics Data System (ADS)

van der Hulst, J. M.; Punzo, D.; Roerdink, J. B. T. M.

2017-06-01

Upcoming HI surveys will deliver such large datasets that automated processing using the full 3-D information to find and characterize HI objects is unavoidable. Full 3-D visualization is an essential tool for enabling qualitative and quantitative inspection and analysis of the 3-D data, which is often complex in nature. Here we present SlicerAstro, an open-source extension of 3DSlicer, a multi-platform open source software package for visualization and medical image processing, which we developed for the inspection and analysis of HI spectral line data. We describe its initial capabilities, including 3-D filtering, 3-D selection and comparative modelling.

The VERCE Science Gateway: enabling user friendly seismic waves simulations across European HPC infrastructures

NASA Astrophysics Data System (ADS)

Spinuso, Alessandro; Krause, Amy; Ramos Garcia, Clàudia; Casarotti, Emanuele; Magnoni, Federica; Klampanos, Iraklis A.; Frobert, Laurent; Krischer, Lion; Trani, Luca; David, Mario; Leong, Siew Hoon; Muraleedharan, Visakh

2014-05-01

The EU-funded project VERCE (Virtual Earthquake and seismology Research Community in Europe) aims to deploy technologies which satisfy the HPC and data-intensive requirements of modern seismology. As a result of VERCE's official collaboration with the EU project SCI-BUS, access to computational resources, like local clusters and international infrastructures (EGI and PRACE), is made homogeneous and integrated within a dedicated science gateway based on the gUSE framework. In this presentation we give a detailed overview on the progress achieved with the developments of the VERCE Science Gateway, according to a use-case driven implementation strategy. More specifically, we show how the computational technologies and data services have been integrated within a tool for Seismic Forward Modelling, whose objective is to offer the possibility to perform simulations of seismic waves as a service to the seismological community. We will introduce the interactive components of the OGC map based web interface and how it supports the user with setting up the simulation. We will go through the selection of input data, which are either fetched from federated seismological web services, adopting community standards, or provided by the users themselves by accessing their own document data store. The HPC scientific codes can be selected from a number of waveform simulators, currently available to the seismological community as batch tools or with limited configuration capabilities in their interactive online versions. The results will be staged out from the HPC via a secure GridFTP transfer to a VERCE data layer managed by iRODS. The provenance information of the simulation will be automatically cataloged by the data layer via NoSQL techonologies. We will try to demonstrate how data access, validation and visualisation can be supported by a general purpose provenance framework which, besides common provenance concepts imported from the OPM and the W3C-PROV initiatives, also offers an extensible metadata archive including community and user defined metadata and annotations. Finally, we will show how the VERCE Gateway platform will allow the customisation of pre and post processing phases of the simulation workflows, thanks to the availability of a registry of processing elements (PEs,) which are easily developed and maintained by the seismologists.

Systematic chemical-genetic and chemical-chemical interaction datasets for prediction of compound synergism

PubMed Central

Wildenhain, Jan; Spitzer, Michaela; Dolma, Sonam; Jarvik, Nick; White, Rachel; Roy, Marcia; Griffiths, Emma; Bellows, David S.; Wright, Gerard D.; Tyers, Mike

2016-01-01

The network structure of biological systems suggests that effective therapeutic intervention may require combinations of agents that act synergistically. However, a dearth of systematic chemical combination datasets have limited the development of predictive algorithms for chemical synergism. Here, we report two large datasets of linked chemical-genetic and chemical-chemical interactions in the budding yeast Saccharomyces cerevisiae. We screened 5,518 unique compounds against 242 diverse yeast gene deletion strains to generate an extended chemical-genetic matrix (CGM) of 492,126 chemical-gene interaction measurements. This CGM dataset contained 1,434 genotype-specific inhibitors, termed cryptagens. We selected 128 structurally diverse cryptagens and tested all pairwise combinations to generate a benchmark dataset of 8,128 pairwise chemical-chemical interaction tests for synergy prediction, termed the cryptagen matrix (CM). An accompanying database resource called ChemGRID was developed to enable analysis, visualisation and downloads of all data. The CGM and CM datasets will facilitate the benchmarking of computational approaches for synergy prediction, as well as chemical structure-activity relationship models for anti-fungal drug discovery. PMID:27874849

High performance cellular level agent-based simulation with FLAME for the GPU.

PubMed

Richmond, Paul; Walker, Dawn; Coakley, Simon; Romano, Daniela

2010-05-01

Driven by the availability of experimental data and ability to simulate a biological scale which is of immediate interest, the cellular scale is fast emerging as an ideal candidate for middle-out modelling. As with 'bottom-up' simulation approaches, cellular level simulations demand a high degree of computational power, which in large-scale simulations can only be achieved through parallel computing. The flexible large-scale agent modelling environment (FLAME) is a template driven framework for agent-based modelling (ABM) on parallel architectures ideally suited to the simulation of cellular systems. It is available for both high performance computing clusters (www.flame.ac.uk) and GPU hardware (www.flamegpu.com) and uses a formal specification technique that acts as a universal modelling format. This not only creates an abstraction from the underlying hardware architectures, but avoids the steep learning curve associated with programming them. In benchmarking tests and simulations of advanced cellular systems, FLAME GPU has reported massive improvement in performance over more traditional ABM frameworks. This allows the time spent in the development and testing stages of modelling to be drastically reduced and creates the possibility of real-time visualisation for simple visual face-validation.

Evolving spatio-temporal data machines based on the NeuCube neuromorphic framework: Design methodology and selected applications.

PubMed

Kasabov, Nikola; Scott, Nathan Matthew; Tu, Enmei; Marks, Stefan; Sengupta, Neelava; Capecci, Elisa; Othman, Muhaini; Doborjeh, Maryam Gholami; Murli, Norhanifah; Hartono, Reggio; Espinosa-Ramos, Josafath Israel; Zhou, Lei; Alvi, Fahad Bashir; Wang, Grace; Taylor, Denise; Feigin, Valery; Gulyaev, Sergei; Mahmoud, Mahmoud; Hou, Zeng-Guang; Yang, Jie

2016-06-01

The paper describes a new type of evolving connectionist systems (ECOS) called evolving spatio-temporal data machines based on neuromorphic, brain-like information processing principles (eSTDM). These are multi-modular computer systems designed to deal with large and fast spatio/spectro temporal data using spiking neural networks (SNN) as major processing modules. ECOS and eSTDM in particular can learn incrementally from data streams, can include 'on the fly' new input variables, new output class labels or regression outputs, can continuously adapt their structure and functionality, can be visualised and interpreted for new knowledge discovery and for a better understanding of the data and the processes that generated it. eSTDM can be used for early event prediction due to the ability of the SNN to spike early, before whole input vectors (they were trained on) are presented. A framework for building eSTDM called NeuCube along with a design methodology for building eSTDM using this is presented. The implementation of this framework in MATLAB, Java, and PyNN (Python) is presented. The latter facilitates the use of neuromorphic hardware platforms to run the eSTDM. Selected examples are given of eSTDM for pattern recognition and early event prediction on EEG data, fMRI data, multisensory seismic data, ecological data, climate data, audio-visual data. Future directions are discussed, including extension of the NeuCube framework for building neurogenetic eSTDM and also new applications of eSTDM. Copyright © 2015 Elsevier Ltd. All rights reserved.

ChronoMedIt--a computational quality audit framework for better management of patients with chronic conditions.

PubMed

Mabotuwana, Thusitha; Warren, Jim

2010-02-01

Quality audit and feedback to general practice is an important aspect of successful chronic disease management. However, due to the complex temporal relationships associated with the nature of chronic illness, formulating clinically relevant queries within the context of a specific evaluation period is difficult. We abstracted requirements from a set of previously developed criteria to develop a generic criteria model that can be used to formulate queries related to chronic condition management. We implemented and verified the framework, ChronoMedIt, to execute clinical queries within the scope of the criteria model. Our criteria model consists of four broad classes of audit criteria - lapse in indicated therapy, no measurement recording, time to achieve target and measurement contraindicating therapy. Using these criteria classes as a guide, ChronoMedIt has been implemented as an extensible framework. ChronoMedIt can produce criteria reports and has an integrated prescription and measurement timeline visualisation tool. We illustrate the use of the framework by identifying patients on suboptimal therapy based on a range of pre-determined audit criteria using production electronic medical record data from two general medical practices for 607 and 679 patients with hypertension. As the most prominent result, we find that 59% (out of 607) and 34% (out of 679) of patients with hypertension had at least one episode of >30day lapse in their antihypertensive therapy over a 12-month evaluation period. ChronoMedIt can reliably execute a wide range of clinically useful queries to identify patients whose chronic condition management can be improved.

Finite Element Modeling of Non-linear Coupled Interacting Fault System

NASA Astrophysics Data System (ADS)

Xing, H. L.; Zhang, J.; Wyborn, D.

2009-04-01

PANDAS - Parallel Adaptive static/dynamic Nonlinear Deformation Analysis System - a novel supercomputer simulation tool is developed for simulating the highly non-linear coupled geomechanical-fluid flow-thermal systems involving heterogeneously fractured geomaterials. PANDAS includes the following key components: Pandas/Pre, ESyS_Crustal, Pandas/Thermo, Pandas/Fluid and Pandas/Post as detailed in the following: • Pandas/Pre is developed to visualise the microseismicity events recorded during the hydraulic stimulation process to further evaluate the fracture location and evolution and geological setting of a certain reservoir, and then generate the mesh by it and/or other commercial graphics software (such as Patran) for the further finite element analysis of various cases; The Delaunay algorithm is applied as a suitable method for mesh generation using such a point set; • ESyS_Crustal is a finite element code developed for the interacting fault system simulation, which employs the adaptive static/dynamic algorithm to simulate the dynamics and evolution of interacting fault systems and processes that are relevant on short to mediate time scales in which several dynamic phenomena related with stick-slip instability along the faults need to be taken into account, i.e. (a). slow quasi-static stress accumulation, (b) rapid dynamic rupture, (c) wave propagation and (d) corresponding stress redistribution due to the energy release along the multiple fault boundaries; those are needed to better describe ruputure/microseimicity/earthquake related phenomena with applications in earthquake forecasting, hazard quantification, exploration, and environmental problems. It has been verified with various available experimental results[1-3]; • Pandas/Thermo is a finite element method based module for the thermal analysis of the fractured porous media; the temperature distribution is calculated from the heat transfer induced by the thermal boundary conditions without/with the coupled fluid effects and the geomechanical energy conversion for the pure/coupled thermal analysis. • Pandas/Fluid is a finite element method based module for simulating the fluid flow in the fractured porous media; the fluid flow velocity and pressure are calculated from energy equilibrium equations without/together with the coupling effects of the thermal and solid rock deformation for an independent/coupled fluid flow analysis; • Pandas/Post is to visualise the simulation results through the integration of VTK and/or Patran. All the above modules can be used independently/together to simulate individual/coupled phenomena (such as interacting fault system dynamics, heat flow and fluid flow) without/with coupling effects. PANDAS has been applied to the following issues: • visualisation of the microseismic events to monitor and determine where/how the underground rupture proceeds during a hydraulic stimulation, to generate the mesh using the recorded data for determining the domain of the ruptured zone and to evaluate the material parameters (i.e. the permeability) for the further numerical analysis; • interacting fault system simulation to determine the relevant complicated dynamic rupture process. • geomechanical-fluid flow coupling analysis to investigate the interactions between fluid flow and deformation in the fractured porous media under different loading conditions. • thermo-fluid flow coupling analysis of a fractured geothermal reservoir system. PANDAS will be further developed for a multiscale simulation of multiphase dynamic behaviour for a certain fractured geothermal reservoir. More details and additional application examples will be given during the presentation. References [1] Xing, H. L., Makinouchi, A. and Mora, P. (2007). Finite element modeling of interacting fault system, Physics of the Earth and Planetary Interiors, 163, 106-121.doi:10.1016/j.pepi.2007.05.006 [2] Xing, H. L., Mora, P., Makinouchi, A. (2006). An unified friction description and its application to simulation of frictional instability using finite element method. Philosophy Magazine, 86, 3453-3475 [3] Xing, H. L., Mora, P.(2006). Construction of an intraplate fault system model of South Australia, and simulation tool for the iSERVO institute seed project.. Pure and Applied Geophysics. 163, 2297-2316. DOI 10.1007/s00024-006-0127-x

What Do Cells Really Look Like? An Inquiry into Students' Difficulties in Visualising a 3-D Biological Cell and Lessons for Pedagogy

ERIC Educational Resources Information Center

Vijapurkar, Jyotsna; Kawalkar, Aisha; Nambiar, Priya

2014-01-01

In our explorations of students' concepts in an inquiry science classroom with grade 6 students from urban schools in India, we uncovered a variety of problems in their understanding of biological cells as structural and functional units of living organisms. In particular, we found not only that they visualised the cell as a two-dimensional (2-D)…

Interaction Pattern Analysis in cMOOCs Based on the Connectivist Interaction and Engagement Framework

ERIC Educational Resources Information Center

Wang, Zhijun; Anderson, Terry; Chen, Li; Barbera, Elena

2017-01-01

Connectivist learning is interaction-centered learning. A framework describing interaction and cognitive engagement in connectivist learning was constructed using logical reasoning techniques. The framework and analysis was designed to help researchers and learning designers understand and adapt the characteristics and principles of interaction in…

Integrating data from biological experiments into metabolic networks with the DBE information system.

PubMed

Borisjuk, Ljudmilla; Hajirezaei, Mohammad-Reza; Klukas, Christian; Rolletschek, Hardy; Schreiber, Falk

2005-01-01

Modern 'omics'-technologies result in huge amounts of data about life processes. For analysis and data mining purposes this data has to be considered in the context of the underlying biological networks. This work presents an approach for integrating data from biological experiments into metabolic networks by mapping the data onto network elements and visualising the data enriched networks automatically. This methodology is implemented in DBE, an information system that supports the analysis and visualisation of experimental data in the context of metabolic networks. It consists of five parts: (1) the DBE-Database for consistent data storage, (2) the Excel-Importer application for the data import, (3) the DBE-Website as the interface for the system, (4) the DBE-Pictures application for the up- and download of binary (e. g. image) files, and (5) DBE-Gravisto, a network analysis and graph visualisation system. The usability of this approach is demonstrated in two examples.

Proper use of colour schemes for image data visualization

NASA Astrophysics Data System (ADS)

Vozenilek, Vit; Vondrakova, Alena

2018-04-01

With the development of information and communication technologies, new technologies are leading to an exponential increase in the volume and types of data available. At this time of the information society, data is one of the most important arguments for policy making, crisis management, research and education, and many other fields. An essential task for experts is to share high-quality data providing the right information at the right time. Designing of data presentation can largely influence the user perception and the cognitive aspects of data interpretation. Significant amounts of data can be visualised in some way. One image can thus replace a considerable number of numeric tables and texts. The paper focuses on the accurate visualisation of data from the point of view of used colour schemes. Bad choose of colours can easily confuse the user and lead to the data misinterpretation. On the contrary, correctly created visualisations can make information transfer much simpler and more efficient.

SpineCreator: a Graphical User Interface for the Creation of Layered Neural Models.

PubMed

Cope, A J; Richmond, P; James, S S; Gurney, K; Allerton, D J

2017-01-01

There is a growing requirement in computational neuroscience for tools that permit collaborative model building, model sharing, combining existing models into a larger system (multi-scale model integration), and are able to simulate models using a variety of simulation engines and hardware platforms. Layered XML model specification formats solve many of these problems, however they are difficult to write and visualise without tools. Here we describe a new graphical software tool, SpineCreator, which facilitates the creation and visualisation of layered models of point spiking neurons or rate coded neurons without requiring the need for programming. We demonstrate the tool through the reproduction and visualisation of published models and show simulation results using code generation interfaced directly into SpineCreator. As a unique application for the graphical creation of neural networks, SpineCreator represents an important step forward for neuronal modelling.

Penetration Characteristics of Air, Carbon Dioxide and Helium Transverse Sonic Jets in Mach 5 Cross Flow.

PubMed

Erdem, Erinc; Kontis, Konstantinos; Saravanan, Selvaraj

2014-12-08

An experimental investigation of sonic air, CO 2 and Helium transverse jets in Mach 5 cross flow was carried out over a flat plate. The jet to freestream momentum flux ratio, J, was kept the same for all gases. The unsteady flow topology was examined using high speed schlieren visualisation and PIV. Schlieren visualisation provided information regarding oscillating jet shear layer structures and bow shock, Mach disc and barrel shocks. Two-component PIV measurements at the centreline, provided information regarding jet penetration trajectories. Barrel shocks and Mach disc forming the jet boundary were visualised/quantified also jet penetration boundaries were determined. Even though J is kept the same for all gases, the penetration patterns were found to be remarkably different both at the nearfield and the farfield. Air and CO 2 jet resulted similar nearfield and farfield penetration pattern whereas Helium jet spread minimal in the nearfield.

Penetration Characteristics of Air, Carbon Dioxide and Helium Transverse Sonic Jets in Mach 5 Cross Flow

PubMed Central

Erdem, Erinc; Kontis, Konstantinos; Saravanan, Selvaraj

2014-01-01

An experimental investigation of sonic air, CO2 and Helium transverse jets in Mach 5 cross flow was carried out over a flat plate. The jet to freestream momentum flux ratio, J, was kept the same for all gases. The unsteady flow topology was examined using high speed schlieren visualisation and PIV. Schlieren visualisation provided information regarding oscillating jet shear layer structures and bow shock, Mach disc and barrel shocks. Two-component PIV measurements at the centreline, provided information regarding jet penetration trajectories. Barrel shocks and Mach disc forming the jet boundary were visualised/quantified also jet penetration boundaries were determined. Even though J is kept the same for all gases, the penetration patterns were found to be remarkably different both at the nearfield and the farfield. Air and CO2 jet resulted similar nearfield and farfield penetration pattern whereas Helium jet spread minimal in the nearfield. PMID:25494348

A web-based 3D visualisation and assessment system for urban precinct scenario modelling

NASA Astrophysics Data System (ADS)

Trubka, Roman; Glackin, Stephen; Lade, Oliver; Pettit, Chris

2016-07-01

Recent years have seen an increasing number of spatial tools and technologies for enabling better decision-making in the urban environment. They have largely arisen because of the need for cities to be more efficiently planned to accommodate growing populations while mitigating urban sprawl, and also because of innovations in rendering data in 3D being well suited for visualising the urban built environment. In this paper we review a number of systems that are better known and more commonly used in the field of urban planning. We then introduce Envision Scenario Planner (ESP), a web-based 3D precinct geodesign, visualisation and assessment tool, developed using Agile and Co-design methods. We provide a comprehensive account of the tool, beginning with a discussion of its design and development process and concluding with an example use case and a discussion of the lessons learned in its development.

A Practical Approach to Spatiotemporal Data Compression

NASA Astrophysics Data System (ADS)

Prudden, Rachel; Robinson, Niall; Arribas, Alberto

2017-04-01

Datasets representing the world around us are becoming ever more unwieldy as data volumes grow. This is largely due to increased measurement and modelling resolution, but the problem is often exacerbated when data are stored at spuriously high precisions. In an effort to facilitate analysis of these datasets, computationally intensive calculations are increasingly being performed on specialised remote servers before the reduced data are transferred to the consumer. Due to bandwidth limitations, this often means data are displayed as simple 2D data visualisations, such as scatter plots or images. We present here a novel way to efficiently encode and transmit 4D data fields on-demand so that they can be locally visualised and interrogated. This nascent "4D video" format allows us to more flexibly move the boundary between data server and consumer client. However, it has applications beyond purely scientific visualisation, in the transmission of data to virtual and augmented reality.

DataRocket: Interactive Visualisation of Data Structures

NASA Astrophysics Data System (ADS)

Parkes, Steve; Ramsay, Craig

2010-08-01

CodeRocket is a software engineering tool that provides cognitive support to the software engineer for reasoning about a method or procedure and for documenting the resulting code [1]. DataRocket is a software engineering tool designed to support visualisation and reasoning about program data structures. DataRocket is part of the CodeRocket family of software tools developed by Rapid Quality Systems [2] a spin-out company from the Space Technology Centre at the University of Dundee. CodeRocket and DataRocket integrate seamlessly with existing architectural design and coding tools and provide extensive documentation with little or no effort on behalf of the software engineer. Comprehensive, abstract, detailed design documentation is available early on in a project so that it can be used for design reviews with project managers and non expert stakeholders. Code and documentation remain fully synchronised even when changes are implemented in the code without reference to the existing documentation. At the end of a project the press of a button suffices to produce the detailed design document. Existing legacy code can be easily imported into CodeRocket and DataRocket to reverse engineer detailed design documentation making legacy code more manageable and adding substantially to its value. This paper introduces CodeRocket. It then explains the rationale for DataRocket and describes the key features of this new tool. Finally the major benefits of DataRocket for different stakeholders are considered.

A novel method for visualising and quantifying through-plane skin layer deformations.

PubMed

Gerhardt, L-C; Schmidt, J; Sanz-Herrera, J A; Baaijens, F P T; Ansari, T; Peters, G W M; Oomens, C W J

2012-10-01

Skin is a multilayer composite and exhibits highly non-linear, viscoelastic, anisotropic material properties. In many consumer product and medical applications (e.g. during shaving, needle insertion, patient re-positioning), large tissue displacements and deformations are involved; consequently large local strains in the skin tissue can occur. Here, we present a novel imaging-based method to study skin deformations and the mechanics of interacting skin layers of full-thickness skin. Shear experiments and real-time video recording were combined with digital image correlation and strain field analysis to visualise and quantify skin layer deformations during dynamic mechanical testing. A global shear strain of 10% was applied to airbrush-patterned porcine skin (thickness: 1.2-1.6mm) using a rotational rheometer. The recordings were analysed with ARAMIS image correlation software, and local skin displacement, strain and stiffness profiles through the skin layers determined. The results of this pilot study revealed inhomogeneous skin deformation, characterised by a gradual transition from a low (2.0-5.0%; epidermis) to high (10-22%; dermis) shear strain regime. Shear moduli ranged from 20 to 130kPa. The herein presented method will be used for more extended studies on viable human skin, and is considered a valuable foundation for further development of constitutive models which can be used in advanced finite element analyses of skin. Copyright © 2012 Elsevier Ltd. All rights reserved.

phiGENOME: an integrative navigation throughout bacteriophage genomes.

PubMed

Stano, Matej; Klucar, Lubos

2011-11-01

phiGENOME is a web-based genome browser generating dynamic and interactive graphical representation of phage genomes stored in the phiSITE, database of gene regulation in bacteriophages. phiGENOME is an integral part of the phiSITE web portal (http://www.phisite.org/phigenome) and it was optimised for visualisation of phage genomes with the emphasis on the gene regulatory elements. phiGENOME consists of three components: (i) genome map viewer built using Adobe Flash technology, providing dynamic and interactive graphical display of phage genomes; (ii) sequence browser based on precisely formatted HTML tags, providing detailed exploration of genome features on the sequence level and (iii) regulation illustrator, based on Scalable Vector Graphics (SVG) and designed for graphical representation of gene regulations. Bringing 542 complete genome sequences accompanied with their rich annotations and references, makes phiGENOME a unique information resource in the field of phage genomics. Copyright © 2011 Elsevier Inc. All rights reserved.

Non-destructive phase contrast hard x-ray imaging to reveal the three-dimensional microstructure of soft and hard tissues

NASA Astrophysics Data System (ADS)

Khimchenko, Anna; Schulz, Georg; Deyhle, Hans; Hieber, Simone E.; Hasan, Samiul; Bikis, Christos; Schulz, Joachim; Costeur, Loïc.; Müller, Bert

2016-04-01

X-ray imaging in the absorption contrast mode is an established method of visualising calcified tissues such as bone and teeth. Physically soft tissues such as brain or muscle are often imaged using magnetic resonance imaging (MRI). However, the spatial resolution of MRI is insufficient for identifying individual biological cells within three-dimensional tissue. X-ray grating interferometry (XGI) has advantages for the investigation of soft tissues or the simultaneous three-dimensional visualisation of soft and hard tissues. Since laboratory microtomography (μCT) systems have better accessibility than tomography set-ups at synchrotron radiation facilities, a great deal of effort has been invested in optimising XGI set-ups for conventional μCT systems. In this conference proceeding, we present how a two-grating interferometer is incorporated into a commercially available nanotom m (GE Sensing and Inspection Technologies GmbH) μCT system to extend its capabilities toward phase contrast. We intend to demonstrate superior contrast in spiders (Hogna radiata (Fam. Lycosidae) and Xysticus erraticus (Fam. Thomisidae)), as well as the simultaneous visualisation of hard and soft tissues. XGI is an imaging modality that provides quantitative data, and visualisation is an important part of biomimetics; consequently, hard X-ray imaging provides a sound basis for bioinspiration, bioreplication and biomimetics and allows for the quantitative comparison of biofabricated products with their natural counterparts.

Comparison of glottic visualisation and ease of intubation with different laryngoscope blades.

PubMed

Kulkarni, Atul P; Tirmanwar, Amar S

2013-03-01

Literature suggests glottic view is better with straight blades while tracheal intubation is easier with curved blades. To compare glottic view and ease of intubation with Macintosh, Miller, McCoy blades and the Trueview(®) laryngoscope. This prospective randomised study was undertaken in operation theatres of a 550 bedded tertiary referral cancer centre after approval from the Institutional Review Board. We compared the Macintosh, Miller, McCoy blades and the Trueview(®) laryngoscope for glottic visualisation and ease of tracheal intubation; in 120 patients undergoing elective cancer surgery; randomly divided into four groups. After induction of anaesthesia laryngoscopy was performed and trachea intubated. We recorded: Visualisation of glottis (Cormack Lehane grade), ease of intubation, number of attempts; need to change the blade and need for external laryngeal manipulation. Demographic data, Mallampati classification were compared using the Chi-square test. A P<0.05 was considered significant. Grade 1 view was obtained most often (87% patients) with Trueview(®) laryngoscope. Intubation was easier (Grade 1) with Trueview(®) and McCoy blades (93% each). Seven patients needed two attempts; one patient in Miller group needed three attempts. No patient in McCoy and Trueview(®) Groups required external laryngeal manipulation. We found that in patients with normal airway glottis was best visualised with Miller blade and Trueview(®) laryngoscope however, the trachea was more easily intubated with McCoy and Macintosh blades and Trueview(®) laryngoscope.

AnisoVis: a MATLAB™ toolbox for the visualisation of elastic anisotropy

NASA Astrophysics Data System (ADS)

Healy, D.; Timms, N.; Pearce, M. A.

2016-12-01

The elastic properties of rocks and minerals vary with direction, and this has significant consequences for their physical response to acoustic waves and natural or imposed stresses. This anisotropy of elasticity is well described mathematically by 4th rank tensors of stiffness or compliance. These tensors are not easy to visualise in a single diagram or graphic, and visualising Poisson's ratio and shear modulus presents a further challenge in that their anisotropy depends on two principal directions. Students and researchers can easily underestimate the importance of elastic anisotropy. This presentation describes an open source toolbox of MATLAB scripts that aims to visualise elastic anisotropy in rocks and minerals. The code produces linked 2-D and 3-D representations of the standard elastic constants, such as Young's modulus, Poisson's ratio and shear modulus, all from a simple GUI. The 3-D plots can be manipulated by the user (rotated, panned, zoomed), to encourage investigation and a deeper understanding of directional variations in the fundamental properties. Examples are presented of common rock forming minerals, including those with negative Poisson's ratio (auxetic behaviour). We hope that an open source code base will encourage further enhancements from the rock physics and wider geoscience communities. Eventually, we hope to generate 3-D prints of these complex and beautiful natural surfaces to provide a tactile link to the underlying physics of elastic anisotropy.

Fast multi-core based multimodal registration of 2D cross-sections and 3D datasets

PubMed Central

2010-01-01

Background Solving bioinformatics tasks often requires extensive computational power. Recent trends in processor architecture combine multiple cores into a single chip to improve overall performance. The Cell Broadband Engine (CBE), a heterogeneous multi-core processor, provides power-efficient and cost-effective high-performance computing. One application area is image analysis and visualisation, in particular registration of 2D cross-sections into 3D image datasets. Such techniques can be used to put different image modalities into spatial correspondence, for example, 2D images of histological cuts into morphological 3D frameworks. Results We evaluate the CBE-driven PlayStation 3 as a high performance, cost-effective computing platform by adapting a multimodal alignment procedure to several characteristic hardware properties. The optimisations are based on partitioning, vectorisation, branch reducing and loop unrolling techniques with special attention to 32-bit multiplies and limited local storage on the computing units. We show how a typical image analysis and visualisation problem, the multimodal registration of 2D cross-sections and 3D datasets, benefits from the multi-core based implementation of the alignment algorithm. We discuss several CBE-based optimisation methods and compare our results to standard solutions. More information and the source code are available from http://cbe.ipk-gatersleben.de. Conclusions The results demonstrate that the CBE processor in a PlayStation 3 accelerates computational intensive multimodal registration, which is of great importance in biological/medical image processing. The PlayStation 3 as a low cost CBE-based platform offers an efficient option to conventional hardware to solve computational problems in image processing and bioinformatics. PMID:20064262

Landscape ecological assessment: a tool for integrating biodiversity issues in strategic environmental assessment and planning.

PubMed

Mörtberg, U M; Balfors, B; Knol, W C

2007-03-01

To achieve a sustainable development, impacts on biodiversity of urbanisation, new infrastructure projects and other land use changes must be considered on landscape and regional scales. This requires that important decisions are made after a systematic evaluation of environmental impacts. Landscape ecology can provide a conceptual framework for the assessment of consequences of long-term development processes like urbanisation on biodiversity components, and for evaluating and visualising the impacts of alternative planning scenarios. The aim of this paper was to develop methods for integrating biodiversity issues in planning and strategic environmental assessment in an urbanising environment, on landscape and regional levels. In order to test developed methods, a case study was conducted in the region of Stockholm, the capital of Sweden, and the study area embraced the city centre, suburbs and peri-urban areas. Focal species were tested as indicators of habitat quality, quantity and connectivity in the landscape. Predictive modelling of habitat distribution in geographic information systems involved the modelling of focal species occurrences based on empirical data, incorporated in a landscape ecological decision support system. When habitat models were retrieved, they were applied on future planning scenarios in order to predict and assess the impacts on focal species. The scenario involving a diffuse exploitation pattern had the greatest negative impacts on the habitat networks of focal species. The scenarios with concentrated exploitation also had negative impacts, although they were possible to mitigate quite easily. The predictions of the impacts on habitats networks of focal species made it possible to quantify, integrate and visualise the effects of urbanisation scenarios on aspects of biodiversity on a landscape level.

From Tls Survey to 3d Solid Modeling for Documentation of Built Heritage: the Case Study of Porta Savonarola in Padua

NASA Astrophysics Data System (ADS)

Guarnieri, A.; Fissore, F.; Masiero, A.; Vettore, A.

2017-08-01

It is a matter of fact that 3D visualisation and proper documentation of cultural objects helps to preserve the history and memories of historic buildings, archaeological sites and cultural landscapes, and supports economic growth by stimulating cultural tourism. Preservation, visualisation and recreation of valuable historical and architectural objects and places has always been a serious challenge for specialists in the field. Today, the rapid developments in the fields of close-range photogrammetry, terrestrial laser scanning (TLS) and computer vision (CV) enable to carry out highly accurate 3D models so as to be extremely effective and intuitive for users who have stringent requirements and high expectations. In this note we present the results of the survey and 3D modeling of an ancient gate, Porta Savonarola, located within the remains of the medieval town walls surrounding the historical city center of Padua, Italy. The work has been undertaken within the framework of the project "Walls Multimedia Museum" (WMM) promoted by the local private association "Padua Walls Committee". The goal of the project was to develop a prototype of an "extended" virtual museum, spreaded along most interesting locations of the town walls. The survey of the ancient gate was performed with a Leica C10 and P20 terrestrial laser scanners. Once the acquired scans were properly merged together, a solid model was generated from the global point cloud, and plans and elevations were extracted from it for restoration purposes. A short multimedia video was also created for the "Walls Multimedia Museum", showing both the outer and inner part of the gate. In the paper we will discuss all the steps and challenges addressed to provide the 3D solid model of Porta Savonarola from the TLS data.

Local dynamics in decision making: The evolution of preference within and across decisions

NASA Astrophysics Data System (ADS)

O'Hora, Denis; Dale, Rick; Piiroinen, Petri T.; Connolly, Fionnuala

2013-07-01

Within decisions, perceived alternatives compete until one is preferred. Across decisions, the playing field on which these alternatives compete evolves to favor certain alternatives. Mouse cursor trajectories provide rich continuous information related to such cognitive processes during decision making. In three experiments, participants learned to choose symbols to earn points in a discrimination learning paradigm and the cursor trajectories of their responses were recorded. Decisions between two choices that earned equally high-point rewards exhibited far less competition than decisions between choices that earned equally low-point rewards. Using positional coordinates in the trajectories, it was possible to infer a potential field in which the choice locations occupied areas of minimal potential. These decision spaces evolved through the experiments, as participants learned which options to choose. This visualisation approach provides a potential framework for the analysis of local dynamics in decision-making that could help mitigate both theoretical disputes and disparate empirical results.

Broadview Radar Altimetry Toolbox

NASA Astrophysics Data System (ADS)

Garcia-Mondejar, Albert; Escolà, Roger; Moyano, Gorka; Roca, Mònica; Terra-Homem, Miguel; Friaças, Ana; Martinho, Fernando; Schrama, Ernst; Naeije, Marc; Ambrózio, Américo; Restano, Marco; Benveniste, Jérôme

2017-04-01

The universal altimetry toolbox, BRAT (Broadview Radar Altimetry Toolbox) which can read all previous and current altimetry missions' data, incorporates now the capability to read the upcoming Sentinel3 L1 and L2 products. ESA endeavoured to develop and supply this capability to support the users of the future Sentinel3 SAR Altimetry Mission. BRAT is a collection of tools and tutorial documents designed to facilitate the processing of radar altimetry data. This project started in 2005 from the joint efforts of ESA (European Space Agency) and CNES (Centre National d'Etudes Spatiales), and it is freely available at http://earth.esa.int/brat. The tools enable users to interact with the most common altimetry data formats. The BratGUI is the frontend for the powerful command line tools that are part of the BRAT suite. BRAT can also be used in conjunction with MATLAB/IDL (via reading routines) or in C/C++/Fortran via a programming API, allowing the user to obtain desired data, bypassing the dataformatting hassle. BRAT can be used simply to visualise data quickly, or to translate the data into other formats such as NetCDF, ASCII text files, KML (Google Earth) and raster images (JPEG, PNG, etc.). Several kinds of computations can be done within BRAT involving combinations of data fields that the user can save for posterior reuse or using the already embedded formulas that include the standard oceanographic altimetry formulas. The Radar Altimeter Tutorial, that contains a strong introduction to altimetry, shows its applications in different fields such as Oceanography, Cryosphere, Geodesy, Hydrology among others. Included are also "use cases", with step-by-step examples, on how to use the toolbox in the different contexts. The Sentinel3 SAR Altimetry Toolbox shall benefit from the current BRAT version. While developing the toolbox we will revamp of the Graphical User Interface and provide, among other enhancements, support for reading the upcoming S3 datasets and specific "use cases" for SAR altimetry in order to train the users and make them aware of the great potential of SAR altimetry for coastal and inland applications. As for any open source framework, contributions from users having developed their own functions are welcome. The Broadview Radar Altimetry Toolbox is a continuation of the Basic Radar Altimetry Toolbox. While developing the new toolbox we will revamp of the Graphical User Interface and provide, among other enhancements, support for reading the upcoming S3 datasets and specific "use cases" for SAR altimetry in order to train the users and make them aware of the great potential of SAR altimetry for coastal and inland applications. As for any open source framework, contributions from users having developed their own functions are welcome. The first release of the new Radar Altimetry Toolbox was published in September 2015. It incorporates the capability to read S3 products as well as the new CryoSat2 Baseline C. The second release of the Toolbox, published in October 2016, has a new graphical user interface and other visualisation improvements. The third release (January 2017) includes more features and solves issues from the previous versions.

Comparison of techniques for visualisation of the airway anatomy for ultrasound-assisted intubation: A prospective study of emergency department patients.

PubMed

Romano, Michael J; Lee, Jacques S; Chenkin, Jordan

2018-02-04

Ultrasound has been shown to be a highly accurate adjunct for confirming endotracheal tube (ETT) placement, however there is no universally accepted scanning technique. The objective of this study was to determine which ultrasound technique provides the highest rate of adequate airway visualisation in a sample of stable emergency department (ED) patients. We conducted a prospective observational study using a convenience sample of ED patients. Airway imaging was performed using the following five techniques: 1) transcricothryoid membrane (TCM), 2) suprasternal notch (SSN) without transducer pressure, 3) SSN with pressure, 4) SSN with pressure to the left of the trachea and 5) SSN with pressure to the right of the trachea. A blinded reviewer scored the adequacy of airway visualisation for each technique. A total of 100 patients were enrolled in the study. SSN to the left of the trachea with pressure had the highest rate of adequate airway visualisation (93.0%, 95% CI 86.1-97.1%), followed by 82.0% (95% CI 73.1-89.0%) for SSN with pressure, 74.0% (95% CI 64.3-82.3%) for TCM, 44.0% (95% CI 34.1-54.3%) for SSN without pressure, and 1.0% (95% CI 0.0-5.4%) for SSN to the right of the trachea. In 76.0% (95% CI 66.4-84.0%) of patients, the SSN view was improved by moving the probe off the midline towards the patient's left. In a sample of ED patients, the airway anatomy relevant for use in endotracheal intubation is best visualised at the SSN to the left of the trachea with transducer pressure applied. Copyright © 2018 Société française d'anesthésie et de réanimation (Sfar). Published by Elsevier Masson SAS. All rights reserved.

Picture grammars in classification and semantic interpretation of 3D coronary vessels visualisations

NASA Astrophysics Data System (ADS)

Ogiela, M. R.; Tadeusiewicz, R.; Trzupek, M.

2009-09-01

The work presents the new opportunity for making semantic descriptions and analysis of medical structures, especially coronary vessels CT spatial reconstructions, with the use of AI graph-based linguistic formalisms. In the paper there will be discussed the manners of applying methods of computational intelligence to the development of a syntactic semantic description of spatial visualisations of the heart's coronary vessels. Such descriptions may be used for both smart ordering of images while archiving them and for their semantic searches in medical multimedia databases. Presented methodology of analysis can furthermore be used for attaining other goals related performance of computer-assisted semantic interpretation of selected elements and/or the entire 3D structure of the coronary vascular tree. These goals are achieved through the use of graph-based image formalisms based on IE graphs generating grammars that allow discovering and automatic semantic interpretation of irregularities visualised on the images obtained during diagnostic examinations of the heart muscle. The basis for the construction of 3D reconstructions of biological objects used in this work are visualisations obtained from helical CT scans, yet the method itself may be applied also for other methods of medical 3D images acquisition. The obtained semantic information makes it possible to make a description of the structure focused on the semantics of various morphological forms of the visualised vessels from the point of view of the operation of coronary circulation and the blood supply of the heart muscle. Thanks to these, the analysis conducted allows fast and — to a great degree — automated interpretation of the semantics of various morphological changes in the coronary vascular tree, and especially makes it possible to detect these stenoses in the lumen of the vessels that can cause critical decrease in blood supply to extensive or especially important fragments of the heart muscle.

Physical examination tests and imaging studies based on arthroscopic assessment of the long head of biceps tendon are invalid.

PubMed

Jordan, Robert W; Saithna, Adnan

2017-10-01

The aim of this study was to evaluate whether glenohumeral arthroscopy is an appropriate gold standard for the diagnosis of long head of biceps (LHB) tendon pathology. The objectives were to evaluate whether the length of tendon that can be seen at arthroscopy allows visualisation of areas of predilection of pathology and also to determine the rates of missed diagnoses at arthroscopy when compared to an open approach. A systematic review of cadaveric and clinical studies was performed. The search strategy was applied to MEDLINE, PubMed and Google Scholar databases. All relevant articles were included. Critical appraisal of clinical studies was performed using a validated quality assessment scale. Five articles were identified for inclusion in the review. This included both clinical and cadaveric studies. The overall population comprised 18 cadaveric specimens and 575 patients. Out of the five included studies, three reported the length of LHB tendon visualised during arthroscopy and four reported the rate of missed LHB diagnosis. Cadaveric studies showed that the use of a hook probe allowed arthroscopic visualisation of between 34 and 48 % of the overall length of the LHB. In the clinical series, the rate of missed diagnoses at arthroscopy when compared to open exploration ranged between 33 and 49 %. Arthroscopy allows visualisation of only a small part of the extra-articular LHB tendon. This leads to a high rate of missed pathology in the distal part of the tendon. Published figures for sensitivities and specificities of common physical examination and imaging tests for LHB pathology that are based on arthroscopy as the gold standard are therefore invalid. In clinical practice, it is important to note that a "negative" arthroscopic assessment does not exclude a lesion of the LHB tendon as this technique does not allow visualisation of common sites of distal pathology. IV.

Visualising linked health data to explore health events around preventable hospitalisations in NSW Australia

PubMed Central

Jorm, Louisa R; Leyland, Alastair H

2016-01-01

Objective To explore patterns of health service use in the lead-up to, and following, admission for a ‘preventable’ hospitalisation. Setting 266 950 participants in the 45 and Up Study, New South Wales (NSW) Australia Methods Linked data on hospital admissions, general practitioner (GP) visits and other health events were used to create visual representations of health service use. For each participant, health events were plotted against time, with different events juxtaposed using different markers and panels of data. Various visualisations were explored by patient characteristics, and compared with a cohort of non-admitted participants matched on sociodemographic and health characteristics. Health events were displayed over calendar year and in the 90 days surrounding first preventable hospitalisation. Results The visualisations revealed patterns of clustering of GP consultations in the lead-up to, and following, preventable hospitalisation, with 14% of patients having a consultation on the day of admission and 27% in the prior week. There was a clustering of deaths and other hospitalisations following discharge, particularly for patients with a long length of stay, suggesting patients may have been in a state of health deterioration. Specialist consultations were primarily clustered during the period of hospitalisation. Rates of all health events were higher in patients admitted for a preventable hospitalisation than the matched non-admitted cohort. Conclusions We did not find evidence of limited use of primary care services in the lead-up to a preventable hospitalisation, rather people with preventable hospitalisations tended to have high levels of engagement with multiple elements of the healthcare system. As such, preventable hospitalisations might be better used as a tool for identifying sicker patients for managed care programmes. Visualising longitudinal health data was found to be a powerful strategy for uncovering patterns of health service use, and such visualisations have potential to be more widely adopted in health services research. PMID:27604087

Visualisation of upper limb activity using spirals: A new approach to the assessment of daily prosthesis usage.

PubMed

Chadwell, Alix; Kenney, Laurence; Granat, Malcolm; Thies, Sibylle; Head, John S; Galpin, Adam

2018-02-01

Current outcome measures used in upper limb myoelectric prosthesis studies include clinical tests of function and self-report questionnaires on real-world prosthesis use. Research in other cohorts has questioned both the validity of self-report as an activity assessment tool and the relationship between clinical functionality and real-world upper limb activity. Previously, 1 we reported the first results of monitoring upper limb prosthesis use. However, the data visualisation technique used was limited in scope. Methodology development. To introduce two new methods for the analysis and display of upper limb activity monitoring data and to demonstrate the potential value of the approach with example real-world data. Upper limb activity monitors, worn on each wrist, recorded data on two anatomically intact participants and two prosthesis users over 1 week. Participants also filled in a diary to record upper limb activity. Data visualisation was carried out using histograms, and Archimedean spirals to illustrate temporal patterns of upper limb activity. Anatomically intact participants' activity was largely bilateral in nature, interspersed with frequent bursts of unilateral activity of each arm. At times when the prosthesis was worn prosthesis users showed very little unilateral use of the prosthesis (≈20-40 min/week compared to ≈350 min/week unilateral activity on each arm for anatomically intact participants), with consistent bias towards the intact arm throughout. The Archimedean spiral plots illustrated participant-specific patterns of non-use in prosthesis users. The data visualisation techniques allow detailed and objective assessment of temporal patterns in the upper limb activity of prosthesis users. Clinical relevance Activity monitoring offers an objective method for the assessment of upper limb prosthesis users' (PUs) activity outside of the clinic. By plotting data using Archimedean spirals, it is possible to visualise, in detail, the temporal patterns of upper limb activity. Further work is needed to explore the relationship between traditional functional outcome measures and real-world prosthesis activity.

Addition of simethicone improves small bowel capsule endoscopy visualisation quality.

PubMed

Krijbolder, M S; Grooteman, K V; Bogers, S K; de Jong, D J

2018-01-01

Small bowel capsule endoscopy (SBCE) is an important diagnostic tool for small-bowel diseases but its quality may be hampered by intraluminal gas. This study evaluated the added value of the anti-foaming agent, simethicone, to a bowel preparation with polyethylene glycol (PEG) on the quality of small bowel visualisation and its use in the Netherlands. This was a retrospective, single-blind, cohort study. Patients in the PEG group only received PEG prior to SBCE. Patients in the PEG-S group ingested additional simethicone. Two investigators assessed the quality of small-bowel visualisation using a four-point scale for 'intraluminal gas' and 'faecal contamination'. By means of a survey, the use of anti-foaming agents was assessed in a random sample of 16 Dutch hospitals performing SBCE. The quality of small bowel visualisation in the PEG group (n = 33) was significantly more limited by intraluminal gas when compared with the PEG-S group (n = 31): proximal segment 83.3% in PEG group vs. 18.5% in PEG-S group (p < 0.01), distal segment 66.7% vs. 18.5% respectively (p < 0.01). No difference was observed in the amount of faecal contamination (proximal segment 80.0% PEG vs. 59.3% PEG-S, p = 0.2; distal segment 90.0% PEG vs. 85.2% PEG-S, p = 0.7), mean small bowel transit times (4.0 PEG vs. 3.9 hours PEG-S, p = 0.7) and diagnostic yield (43.3% PEG vs. 22.2% PEG-S, p = 0.16). Frequency of anti-foaming agent use in the Netherlands was low (3/16, 18.8%). Simethicone is of added value to a PEG bowel preparation in improving the quality of visualisation of the small bowel by reducing intraluminal gas. At present, the use of anti-foaming agents in SBCE preparation is not standard practice in the Netherlands.

SeeSway - A free web-based system for analysing and exploring standing balance data.

PubMed

Clark, Ross A; Pua, Yong-Hao

2018-06-01

Computerised posturography can be used to assess standing balance, and can predict poor functional outcomes in many clinical populations. A key limitation is the disparate signal filtering and analysis techniques, with many methods requiring custom computer programs. This paper discusses the creation of a freely available web-based software program, SeeSway (www.rehabtools.org/seesway), which was designed to provide powerful tools for pre-processing, analysing and visualising standing balance data in an easy to use and platform independent website. SeeSway links an interactive web platform with file upload capability to software systems including LabVIEW, Matlab, Python and R to perform the data filtering, analysis and visualisation of standing balance data. Input data can consist of any signal that comprises an anterior-posterior and medial-lateral coordinate trace such as center of pressure or mass displacement. This allows it to be used with systems including criterion reference commercial force platforms and three dimensional motion analysis, smartphones, accelerometers and low-cost technology such as Nintendo Wii Balance Board and Microsoft Kinect. Filtering options include Butterworth, weighted and unweighted moving average, and discrete wavelet transforms. Analysis methods include standard techniques such as path length, amplitude, and root mean square in addition to less common but potentially promising methods such as sample entropy, detrended fluctuation analysis and multiresolution wavelet analysis. These data are visualised using scalograms, which chart the change in frequency content over time, scatterplots and standard line charts. This provides the user with a detailed understanding of their results, and how their different pre-processing and analysis method selections affect their findings. An example of the data analysis techniques is provided in the paper, with graphical representation of how advanced analysis methods can better discriminate between someone with neurological impairment and a healthy control. The goal of SeeSway is to provide a simple yet powerful educational and research tool to explore how standing balance is affected in aging and clinical populations. Copyright © 2018 Elsevier B.V. All rights reserved.

Evaluation of Head Mounted and Head Down Information Displays During Simulated Mine-Countermeasures Dives to 42 msw

DTIC Science & Technology

2008-04-01

visualisation tête basse (VTB) ou d’un visiocasque pour l’exécution de leurs tâches courantes sous l’eau. Neuf plongeurs de lutte contre les mines ont...existe peu d’information empirique sur l’aptitude des plongeurs à utiliser un dispositif multifonction de visualisation tête basse (VTB) ou d’un...experiment, the diver was also linked to the researchers and operations crew via audio communications. 11 Display Screen Chamber Laptop Diver

Visualisation of urban airborne laser scanning data with occlusion images

NASA Astrophysics Data System (ADS)

Hinks, Tommy; Carr, Hamish; Gharibi, Hamid; Laefer, Debra F.

2015-06-01

Airborne Laser Scanning (ALS) was introduced to provide rapid, high resolution scans of landforms for computational processing. More recently, ALS has been adapted for scanning urban areas. The greater complexity of urban scenes necessitates the development of novel methods to exploit urban ALS to best advantage. This paper presents occlusion images: a novel technique that exploits the geometric complexity of the urban environment to improve visualisation of small details for better feature recognition. The algorithm is based on an inversion of traditional occlusion techniques.

The Environmental Virtual Observatory (EVO) local exemplar: A cloud based local landscape learning visualisation tool for communicating flood risk to catchment stakeholders

NASA Astrophysics Data System (ADS)

Wilkinson, Mark; Beven, Keith; Brewer, Paul; El-khatib, Yehia; Gemmell, Alastair; Haygarth, Phil; Mackay, Ellie; Macklin, Mark; Marshall, Keith; Quinn, Paul; Stutter, Marc; Thomas, Nicola; Vitolo, Claudia

2013-04-01

Today's world is dominated by a wide range of informatics tools that are readily available to a wide range of stakeholders. There is growing recognition that the appropriate involvement of local communities in land and water management decisions can result in multiple environmental, economic and social benefits. Therefore, local stakeholder groups are increasingly being asked to participate in decision making alongside policy makers, government agencies and scientists. As such, addressing flooding issues requires new ways of engaging with the catchment and its inhabitants at a local level. To support this, new tools and approaches are required. The growth of cloud based technologies offers new novel ways to facilitate this process of exchange of information in earth sciences. The Environmental Virtual Observatory Pilot project (EVOp) is a new initiative from the UK Natural Environment Research Council (NERC) designed to deliver proof of concept for new tools and approaches to support the challenges as outlined above (http://www.evo-uk.org/). The long term vision of the Environmental Virtual Observatory is to: • Make environmental data more visible and accessible to a wide range of potential users including public good applications; • Provide tools to facilitate the integrated analysis of data, greater access to added knowledge and expert analysis and visualisation of the results; • Develop new, added-value knowledge from public and private sector data assets to help tackle environmental challenges. As part of the EVO pilot, an interactive cloud based tool has been developed with local stakeholders. The Local Landscape Visualisation Tool attempts to communicate flood risk in local impacted communities. The tool has been developed iteratively to reflect the needs, interests and capabilities of a wide range of stakeholders. This tool (assessable via a web portal) combines numerous cloud based tools and services, local catchment datasets, hydrological models and novel visualisation techniques. This pilot tool has been developed by engaging with different stakeholder groups in three catchments in the UK; the Afon Dyfi (Wales), the River Tarland (Scotland) and the River Eden (England). Stakeholders were interested in accessing live data in their catchments and looking at different land use change scenarios on flood peaks. Visualisation tools have been created which offer access to real time data (such as river level, rainfall and webcam images). Other tools allow land owners to use cloud based models (example presented here uses Topmodel, a rainfall-runoff model, on a custom virtual machine image on Amazon web services) and local datasets to explore future land use scenarios, allowing them to understand the associated flood risk. Different ways to communicate model uncertainty are currently being investigated and discussed with stakeholders. In summary the pilot project has had positive feedback and has evolved into two unique parts; a web based map tool and a model interface tool. Users can view live data from different sources, combine different data types together (data mash-up), develop local scenarios for land use and flood risk and exploit the dynamic, elastic cloud modelling capability. This local toolkit will reside within a wider EVO platform that will include national and global datasets, models and state of the art cloud computer systems.

Designing and implementing transparency for real time inspection of autonomous robots

NASA Astrophysics Data System (ADS)

Theodorou, Andreas; Wortham, Robert H.; Bryson, Joanna J.

2017-07-01

The EPSRC's Principles of Robotics advises the implementation of transparency in robotic systems, however research related to AI transparency is in its infancy. This paper introduces the reader of the importance of having transparent inspection of intelligent agents and provides guidance for good practice when developing such agents. By considering and expanding upon other prominent definitions found in literature, we provide a robust definition of transparency as a mechanism to expose the decision-making of a robot. The paper continues by addressing potential design decisions developers need to consider when designing and developing transparent systems. Finally, we describe our new interactive intelligence editor, designed to visualise, develop and debug real-time intelligence.

Computational and mathematical methods in brain atlasing.

PubMed

Nowinski, Wieslaw L

2017-12-01

Brain atlases have a wide range of use from education to research to clinical applications. Mathematical methods as well as computational methods and tools play a major role in the process of brain atlas building and developing atlas-based applications. Computational methods and tools cover three areas: dedicated editors for brain model creation, brain navigators supporting multiple platforms, and atlas-assisted specific applications. Mathematical methods in atlas building and developing atlas-aided applications deal with problems in image segmentation, geometric body modelling, physical modelling, atlas-to-scan registration, visualisation, interaction and virtual reality. Here I overview computational and mathematical methods in atlas building and developing atlas-assisted applications, and share my contribution to and experience in this field.

Diagnostic aids: the Surgical Sieve revisited.

PubMed

Chai, Jason; Evans, Lloyd; Hughes, Tom

2017-08-01

Diagnostic errors are well documented in the literature and emphasise the need to teach diagnostic skills at an early stage in medical school to create effective and safe clinicians. Hence, there may be a place for diagnostic aids (such as the Surgical Sieve) that provide a framework for generating ideas about diagnoses. With repeated use of the Surgical Sieve in teaching sessions with students, and prompted by the traditional handheld wheels used in antenatal clinics, we developed the Compass Medicine, a handheld diagnostic wheel comprising three concentric discs attached at the centre. We report a preliminary study comparing the Surgical Sieve and the Compass Medicine in generating differential diagnoses. A total of 48 third-year medical students from Cardiff University participated in a study aimed at measuring the efficacy of diagnostic aids (Surgical Sieve and Compass Medicine) in generating diagnoses. We quantified the effect each aid had on the number of diagnoses generated, and compared the size of the effect between the two diagnostic aids. There may be a place for diagnostic aids that provide a framework for generating ideas about diagnoses RESULTS: The study suggests that both diagnostic aids prompted users to generate a greater number of diagnoses, but there was no significant difference in the size of effect between the two diagnostic aids. We hope that our study with diagnostic aids will encourage the use of robust tools to teach medical students an easily visualised framework for diagnostic thinking. © 2016 John Wiley & Sons Ltd and The Association for the Study of Medical Education.

Full High-definition three-dimensional gynaecological laparoscopy--clinical assessment of a new robot-assisted device.

PubMed

Tuschy, Benjamin; Berlit, Sebastian; Brade, Joachim; Sütterlin, Marc; Hornemann, Amadeus

2014-01-01

To investigate the clinical assessment of a full high-definition (HD) three-dimensional robot-assisted laparoscopic device in gynaecological surgery. This study included 70 women who underwent gynaecological laparoscopic procedures. Demographic parameters, type and duration of surgery and perioperative complications were analyzed. Fifteen surgeons were postoperatively interviewed regarding their assessment of this new system with a standardized questionnaire. The clinical assessment revealed that three-dimensional full-HD visualisation is comfortable and improves spatial orientation and hand-to-eye coordination. The majority of the surgeons stated they would prefer a three-dimensional system to a conventional two-dimensional device and stated that the robotic camera arm led to more relaxed working conditions. Three-dimensional laparoscopy is feasible, comfortable and well-accepted in daily routine. The three-dimensional visualisation improves surgeons' hand-to-eye coordination, intracorporeal suturing and fine dissection. The combination of full-HD three-dimensional visualisation with the robotic camera arm results in very high image quality and stability.

A Tropical Marine Microbial Natural Products Geobibliography as an Example of Desktop Exploration of Current Research Using Web Visualisation Tools

PubMed Central

Mukherjee, Joydeep; Llewellyn, Lyndon E; Evans-Illidge, Elizabeth A

2008-01-01

Microbial marine biodiscovery is a recent scientific endeavour developing at a time when information and other technologies are also undergoing great technical strides. Global visualisation of datasets is now becoming available to the world through powerful and readily available software such as Worldwind™, ArcGIS Explorer™ and Google Earth™. Overlaying custom information upon these tools is within the hands of every scientist and more and more scientific organisations are making data available that can also be integrated into these global visualisation tools. The integrated global view that these tools enable provides a powerful desktop exploration tool. Here we demonstrate the value of this approach to marine microbial biodiscovery by developing a geobibliography that incorporates citations on tropical and near-tropical marine microbial natural products research with Google Earth™ and additional ancillary global data sets. The tools and software used are all readily available and the reader is able to use and install the material described in this article. PMID:19172194

Point-by-point compositional analysis for atom probe tomography.

PubMed

Stephenson, Leigh T; Ceguerra, Anna V; Li, Tong; Rojhirunsakool, Tanaporn; Nag, Soumya; Banerjee, Rajarshi; Cairney, Julie M; Ringer, Simon P

2014-01-01

This new alternate approach to data processing for analyses that traditionally employed grid-based counting methods is necessary because it removes a user-imposed coordinate system that not only limits an analysis but also may introduce errors. We have modified the widely used "binomial" analysis for APT data by replacing grid-based counting with coordinate-independent nearest neighbour identification, improving the measurements and the statistics obtained, allowing quantitative analysis of smaller datasets, and datasets from non-dilute solid solutions. It also allows better visualisation of compositional fluctuations in the data. Our modifications include:.•using spherical k-atom blocks identified by each detected atom's first k nearest neighbours.•3D data visualisation of block composition and nearest neighbour anisotropy.•using z-statistics to directly compare experimental and expected composition curves. Similar modifications may be made to other grid-based counting analyses (contingency table, Langer-Bar-on-Miller, sinusoidal model) and could be instrumental in developing novel data visualisation options.

Colouring in the "black-box": Alternative renderings of scientific visualisations in two comic book cosmologies.

PubMed

Locke, Simon

2013-04-01

Two somewhat contrasting views of public uses of scientific visualisations argue that they are "black-boxed" with meaning given by the scientific community or they are "polysemic" with meaning given by the context of presentation. This paper argues that whether they are treated as black-boxed or not and in what manner this is done is itself part of the meaning given by context. Thus, "black-boxing" is done not only by scientists but also by members of the public. The argument is illustrated by reference to two recent comic books, Dave Sim's Cerebus and Alan Moore's Promethea, in which the authors present cosmological visions of the universe using scientific visualisations to create a sense of realism. From analysis of their use of images of planet Earth and the human foetus it is argued that, although the images are black-boxed, the authors re-work them aesthetically to suit their specific moral and cosmological views.

Understanding WCAG2.0 Colour Contrast Requirements Through 3D Colour Space Visualisation.

PubMed

Sandnes, Frode Eika

2016-01-01

Sufficient contrast between text and background is needed to achieve sufficient readability. WCAG2.0 provides a specific definition of sufficient contrast on the web. However, the definition is hard to understand and most designers thus use contrast calculators to validate their colour choices. Often, such checks are performed after design and this may be too late. This paper proposes a colour selection approach based on three-dimensional visualisation of the colour space. The complex non-linear relationships between the colour components become comprehendible when viewed in 3D. The method visualises the available colours in an intuitive manner and allows designers to check a colour against the set of other valid colours. Unlike the contrast calculators, the proposed method is proactive and fun to use. A colour space builder was developed and the resulting models were viewed with a point cloud viewer. The technique can be used as both a design tool and a pedagogical aid to teach colour theory and design.

Self organising maps for visualising and modelling

PubMed Central

2012-01-01

The paper describes the motivation of SOMs (Self Organising Maps) and how they are generally more accessible due to the wider available modern, more powerful, cost-effective computers. Their advantages compared to Principal Components Analysis and Partial Least Squares are discussed. These allow application to non-linear data, are not so dependent on least squares solutions, normality of errors and less influenced by outliers. In addition there are a wide variety of intuitive methods for visualisation that allow full use of the map space. Modern problems in analytical chemistry include applications to cultural heritage studies, environmental, metabolomic and biological problems result in complex datasets. Methods for visualising maps are described including best matching units, hit histograms, unified distance matrices and component planes. Supervised SOMs for classification including multifactor data and variable selection are discussed as is their use in Quality Control. The paper is illustrated using four case studies, namely the Near Infrared of food, the thermal analysis of polymers, metabolomic analysis of saliva using NMR, and on-line HPLC for pharmaceutical process monitoring. PMID:22594434

Fluctuating Finite Element Analysis (FFEA): A continuum mechanics software tool for mesoscale simulation of biomolecules

PubMed Central

Solernou, Albert

2018-01-01

Fluctuating Finite Element Analysis (FFEA) is a software package designed to perform continuum mechanics simulations of proteins and other globular macromolecules. It combines conventional finite element methods with stochastic thermal noise, and is appropriate for simulations of large proteins and protein complexes at the mesoscale (length-scales in the range of 5 nm to 1 μm), where there is currently a paucity of modelling tools. It requires 3D volumetric information as input, which can be low resolution structural information such as cryo-electron tomography (cryo-ET) maps or much higher resolution atomistic co-ordinates from which volumetric information can be extracted. In this article we introduce our open source software package for performing FFEA simulations which we have released under a GPLv3 license. The software package includes a C ++ implementation of FFEA, together with tools to assist the user to set up the system from Electron Microscopy Data Bank (EMDB) or Protein Data Bank (PDB) data files. We also provide a PyMOL plugin to perform basic visualisation and additional Python tools for the analysis of FFEA simulation trajectories. This manuscript provides a basic background to the FFEA method, describing the implementation of the core mechanical model and how intermolecular interactions and the solvent environment are included within this framework. We provide prospective FFEA users with a practical overview of how to set up an FFEA simulation with reference to our publicly available online tutorials and manuals that accompany this first release of the package. PMID:29570700

Developing and Evaluating a Technology Enhanced Interaction Framework and Method That Can Enhance the Accessibility of Mobile Learning

ERIC Educational Resources Information Center

Angkananon, Kewalin; Wald, Mike; Gilbert, Lester

2014-01-01

This paper focuses on the development and evaluation of a Technology Enhanced Interaction Framework and Method that can help with designing accessible mobile learning interactions involving disabled people. This new framework and method were developed to help design technological support for communication and interactions between people,…

LandCaRe DSS--an interactive decision support system for climate change impact assessment and the analysis of potential agricultural land use adaptation strategies.

PubMed

Wenkel, Karl-Otto; Berg, Michael; Mirschel, Wilfried; Wieland, Ralf; Nendel, Claas; Köstner, Barbara

2013-09-01

Decision support to develop viable climate change adaptation strategies for agriculture and regional land use management encompasses a wide range of options and issues. Up to now, only a few suitable tools and methods have existed for farmers and regional stakeholders that support the process of decision-making in this field. The interactive model-based spatial information and decision support system LandCaRe DSS attempts to close the existing methodical gap. This system supports interactive spatial scenario simulations, multi-ensemble and multi-model simulations at the regional scale, as well as the complex impact assessment of potential land use adaptation strategies at the local scale. The system is connected to a local geo-database and via the internet to a climate data server. LandCaRe DSS uses a multitude of scale-specific ecological impact models, which are linked in various ways. At the local scale (farm scale), biophysical models are directly coupled with a farm economy calculator. New or alternative simulation models can easily be added, thanks to the innovative architecture and design of the DSS. Scenario simulations can be conducted with a reasonable amount of effort. The interactive LandCaRe DSS prototype also offers a variety of data analysis and visualisation tools, a help system for users and a farmer information system for climate adaptation in agriculture. This paper presents the theoretical background, the conceptual framework, and the structure and methodology behind LandCaRe DSS. Scenario studies at the regional and local scale for the two Eastern German regions of Uckermark (dry lowlands, 2600 km(2)) and Weißeritz (humid mountain area, 400 km(2)) were conducted in close cooperation with stakeholders to test the functionality of the DSS prototype. The system is gradually being transformed into a web version (http://www.landcare-dss.de) to ensure the broadest possible distribution of LandCaRe DSS to the public. The system will be continuously developed, updated and used in different research projects and as a learning and knowledge-sharing tool for students. The main objective of LandCaRe DSS is to provide information on the complex long-term impacts of climate change and on potential management options for adaptation by answering "what-if" type questions. Copyright © 2013 Elsevier Ltd. All rights reserved.

A smoothed particle hydrodynamics framework for modelling multiphase interactions at meso-scale

NASA Astrophysics Data System (ADS)

Li, Ling; Shen, Luming; Nguyen, Giang D.; El-Zein, Abbas; Maggi, Federico

2018-01-01

A smoothed particle hydrodynamics (SPH) framework is developed for modelling multiphase interactions at meso-scale, including the liquid-solid interaction induced deformation of the solid phase. With an inter-particle force formulation that mimics the inter-atomic force in molecular dynamics, the proposed framework includes the long-range attractions between particles, and more importantly, the short-range repulsive forces to avoid particle clustering and instability problems. Three-dimensional numerical studies have been conducted to demonstrate the capabilities of the proposed framework to quantitatively replicate the surface tension of water, to model the interactions between immiscible liquids and solid, and more importantly, to simultaneously model the deformation of solid and liquid induced by the multiphase interaction. By varying inter-particle potential magnitude, the proposed SPH framework has successfully simulated various wetting properties ranging from hydrophobic to hydrophilic surfaces. The simulation results demonstrate the potential of the proposed framework to genuinely study complex multiphase interactions in wet granular media.

Ab initio quantum chemical calculations of the interaction between radioactive elements and imidazolium based ionic liquids

NASA Astrophysics Data System (ADS)

Saravanan, A. V. Sai; Abishek, B.; Anantharaj, R.

2018-04-01

The fundamental natures of the molecular level interaction and charge transfer between specific radioactive elements and ionic liquids of 1-butyl-3-methylimidazolium bis (trifluoromethylsulfonyl) imide ([BMIM]+[NTf2]-), 1-Butyl-3-methylimidazolium ethylsulfate ([BMIM]+[ES]-) and 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM]+[BF4]-) were investigated utilising HF theory and B3LYP hybrid DFT. The ambiguity in reaction mechanism of the interacting species dictates to employ Effective Core Potential (ECP) basis sets such as UGBS, SDD, and SDDAll to account for the relativistic effects of deep core electrons in the system involving potential, heavy and hazardous radioactive elements present in nuclear waste. The SCF energy convergence of each system validates the characterisation of the molecular orbitals as a linear combination of atomic orbitals utilising fixed MO coefficients and the optimized geometry of each system is visualised based on which Mulliken partial charge analysis is carried out to account for the polarising behaviour of the radioactive element and charge transfer between the IL phase by comparison with the bare IL species.

Visualising biological data: a semantic approach to tool and database integration

PubMed Central

Pettifer, Steve; Thorne, David; McDermott, Philip; Marsh, James; Villéger, Alice; Kell, Douglas B; Attwood, Teresa K

2009-01-01

Motivation In the biological sciences, the need to analyse vast amounts of information has become commonplace. Such large-scale analyses often involve drawing together data from a variety of different databases, held remotely on the internet or locally on in-house servers. Supporting these tasks are ad hoc collections of data-manipulation tools, scripting languages and visualisation software, which are often combined in arcane ways to create cumbersome systems that have been customised for a particular purpose, and are consequently not readily adaptable to other uses. For many day-to-day bioinformatics tasks, the sizes of current databases, and the scale of the analyses necessary, now demand increasing levels of automation; nevertheless, the unique experience and intuition of human researchers is still required to interpret the end results in any meaningful biological way. Putting humans in the loop requires tools to support real-time interaction with these vast and complex data-sets. Numerous tools do exist for this purpose, but many do not have optimal interfaces, most are effectively isolated from other tools and databases owing to incompatible data formats, and many have limited real-time performance when applied to realistically large data-sets: much of the user's cognitive capacity is therefore focused on controlling the software and manipulating esoteric file formats rather than on performing the research. Methods To confront these issues, harnessing expertise in human-computer interaction (HCI), high-performance rendering and distributed systems, and guided by bioinformaticians and end-user biologists, we are building reusable software components that, together, create a toolkit that is both architecturally sound from a computing point of view, and addresses both user and developer requirements. Key to the system's usability is its direct exploitation of semantics, which, crucially, gives individual components knowledge of their own functionality and allows them to interoperate seamlessly, removing many of the existing barriers and bottlenecks from standard bioinformatics tasks. Results The toolkit, named Utopia, is freely available from . PMID:19534744

Virtual Visualisation Laboratory for Science and Mathematics Content (Vlab-SMC) with Special Reference to Teaching and Learning of Chemistry

NASA Astrophysics Data System (ADS)

Badioze Zaman, Halimah; Bakar, Norashiken; Ahmad, Azlina; Sulaiman, Riza; Arshad, Haslina; Mohd. Yatim, Nor Faezah

Research on the teaching of science and mathematics in schools and universities have shown that available teaching models are not effective in instilling the understanding of scientific and mathematics concepts, and the right scientific and mathematics skills required for learners to become good future scientists (mathematicians included). The extensive development of new technologies has a marked influence on education, by facilitating the design of new learning and teaching materials, that can improve the attitude of learners towards Science and Mathematics and the plausibility of advanced interactive, personalised learning process. The usefulness of the computer in Science and Mathematics education; as an interactive communication medium that permits access to all types of information (texts, images, different types of data such as sound, graphics and perhaps haptics like smell and touch); as an instrument for problem solving through simulations of scientific and mathematics phenomenon and experiments; as well as measuring and monitoring scientific laboratory experiments. This paper will highlight on the design and development of the virtual Visualisation Laboratory for Science & Mathematics Content (VLab-SMC) based on the Cognitivist- Constructivist-Contextual development life cycle model as well as the Instructional Design (ID) model, in order to achieve its objectives in teaching and learning. However, this paper with only highlight one of the virtual labs within VLab-SMC that is, the Virtual Lab for teaching Chemistry (VLab- Chem). The development life cycle involves the educational media to be used, measurement of content, and the authoring and programming involved; whilst the ID model involves the application of the cognitivist, constructivist and contextual theories in the modeling of the modules of VLab-SMC generally and Vlab-Chem specifically, using concepts such as 'learning by doing', contextual learning, experimental simulations 3D and real-time animations to create a virtual laboratory based on a real laboratory. Initial preliminary study shows positive indicators of VLab-Chem for the teaching and learning of Chemistry on the topic of 'Salts and Acids'.

Web tools for large-scale 3D biological images and atlases

PubMed Central

2012-01-01

Background Large-scale volumetric biomedical image data of three or more dimensions are a significant challenge for distributed browsing and visualisation. Many images now exceed 10GB which for most users is too large to handle in terms of computer RAM and network bandwidth. This is aggravated when users need to access tens or hundreds of such images from an archive. Here we solve the problem for 2D section views through archive data delivering compressed tiled images enabling users to browse through very-large volume data in the context of a standard web-browser. The system provides an interactive visualisation for grey-level and colour 3D images including multiple image layers and spatial-data overlay. Results The standard Internet Imaging Protocol (IIP) has been extended to enable arbitrary 2D sectioning of 3D data as well a multi-layered images and indexed overlays. The extended protocol is termed IIP3D and we have implemented a matching server to deliver the protocol and a series of Ajax/Javascript client codes that will run in an Internet browser. We have tested the server software on a low-cost linux-based server for image volumes up to 135GB and 64 simultaneous users. The section views are delivered with response times independent of scale and orientation. The exemplar client provided multi-layer image views with user-controlled colour-filtering and overlays. Conclusions Interactive browsing of arbitrary sections through large biomedical-image volumes is made possible by use of an extended internet protocol and efficient server-based image tiling. The tools open the possibility of enabling fast access to large image archives without the requirement of whole image download and client computers with very large memory configurations. The system was demonstrated using a range of medical and biomedical image data extending up to 135GB for a single image volume. PMID:22676296

Visualising biological data: a semantic approach to tool and database integration.

PubMed

Pettifer, Steve; Thorne, David; McDermott, Philip; Marsh, James; Villéger, Alice; Kell, Douglas B; Attwood, Teresa K

2009-06-16

In the biological sciences, the need to analyse vast amounts of information has become commonplace. Such large-scale analyses often involve drawing together data from a variety of different databases, held remotely on the internet or locally on in-house servers. Supporting these tasks are ad hoc collections of data-manipulation tools, scripting languages and visualisation software, which are often combined in arcane ways to create cumbersome systems that have been customized for a particular purpose, and are consequently not readily adaptable to other uses. For many day-to-day bioinformatics tasks, the sizes of current databases, and the scale of the analyses necessary, now demand increasing levels of automation; nevertheless, the unique experience and intuition of human researchers is still required to interpret the end results in any meaningful biological way. Putting humans in the loop requires tools to support real-time interaction with these vast and complex data-sets. Numerous tools do exist for this purpose, but many do not have optimal interfaces, most are effectively isolated from other tools and databases owing to incompatible data formats, and many have limited real-time performance when applied to realistically large data-sets: much of the user's cognitive capacity is therefore focused on controlling the software and manipulating esoteric file formats rather than on performing the research. To confront these issues, harnessing expertise in human-computer interaction (HCI), high-performance rendering and distributed systems, and guided by bioinformaticians and end-user biologists, we are building reusable software components that, together, create a toolkit that is both architecturally sound from a computing point of view, and addresses both user and developer requirements. Key to the system's usability is its direct exploitation of semantics, which, crucially, gives individual components knowledge of their own functionality and allows them to interoperate seamlessly, removing many of the existing barriers and bottlenecks from standard bioinformatics tasks. The toolkit, named Utopia, is freely available from http://utopia.cs.man.ac.uk/.

Planetary plasma data analysis and 3D visualisation tools of the CDPP in the IMPEx infrastructure

NASA Astrophysics Data System (ADS)

Gangloff, Michel; Génot, Vincent; Khodachenko, Maxim; Modolo, Ronan; Kallio, Esa; Alexeev, Igor; Al-Ubaidi, Tarek; Scherf, Manuel; André, Nicolas; Bourrel, Nataliya; Budnik, Elena; Bouchemit, Myriam; Dufourg, Nicolas; Beigbeder, Laurent

2015-04-01

The CDPP (Centre de Données de la Physique des Plasmas,(http://cdpp.eu/), the French data center for plasma physics, is engaged for more than a decade in the archiving and dissemination of plasma data products from space missions and ground observatories. Besides these activities, the CDPP developed services like AMDA (http://amda.cdpp.eu/) which enables in depth analysis of a large amount of data through dedicated functionalities such as: visualization, conditional search, cataloguing, and 3DView (http://3dview.cdpp.eu/) which provides immersive visualisations in planetary environments and is further developed to include simulation and observational data. Both tools provide an interface to the IMPEx infrastructure (http://impexfp7.oeaw.ac.at) which facilitates the joint access to outputs of simulations (MHD or Hybrid models) in planetary sciences from providers like LATMOS, FMI as well as planetary plasma observational data provided by the CDPP. Several magnetospheric models are implemented in 3Dview (e.g. Tsyganenko for the Earth, and Cain for Mars). Magnetospheric models provided by SINP for the Earth, Jupiter, Saturn and Mercury as well as Hess models for Jupiter can also be used in 3DView, through the IMPEx infrastructure. A use case demonstrating the new capabilities offered by these tools and their interaction, including magnetospheric models, will be presented together with the IMPEx simulation metadata model used for the interface to simulation databases and model providers.

LASER BIOLOGY AND MEDICINE: Visualisation of details of a complicated inner structure of model objects by the method of diffusion optical tomography

NASA Astrophysics Data System (ADS)

Tret'yakov, Evgeniy V.; Shuvalov, Vladimir V.; Shutov, I. V.

2002-11-01

An approximate algorithm is tested for solving the problem of diffusion optical tomography in experiments on the visualisation of details of the inner structure of strongly scattering model objects containing scattering and semitransparent inclusions, as well as absorbing inclusions located inside other optical inhomogeneities. The stability of the algorithm to errors is demonstrated, which allows its use for a rapid (2 — 3 min) image reconstruction of the details of objects with a complicated inner structure.

The thermal visualisation of latent fingermarks on metallic surfaces.

PubMed

Wightman, G; O'Connor, D

2011-01-30

Recent published research has lead to improved techniques for recovering latent fingermarks from metallic surfaces. The present study corroborates and extends some of the work carried out by Bond [1-3], but an alternative mechanism is proposed for the thermal visualisation of fingermarks based on differential oxidation and the production of interference colours that improve contrast. Fingermarks treated at low temperature could be reheated to enhance recovery, but an upper temperature limit occurs beyond which the mark degrades. The mechanism of enhancement is discussed. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

LASER APPLICATIONS AND OTHER TOPICS IN QUANTUM ELECTRONICS: Laser Doppler visualisation of the velocity field by excluding the influence of multiparticle scattering

NASA Astrophysics Data System (ADS)

Dubnishchev, Yu N.; Chugui, Yu V.; Kompenhans, J.

2009-10-01

The method of laser Doppler visualisation and measurement of the velocity field in gas and liquid flows by suppressing the influence of multiparticle scattering is discussed. The cross section of the flow under study is illuminated by a laser beam transformed by an anamorphic optical system into a laser sheet. The effect of multiparticle scattering is eliminated by obtaining differential combinations of frequency-demodulated images of the laser sheet in different regions of the angular spectrum of scattered light.

UNIVIEW: A computer graphics platform bringing information databases to life

NASA Astrophysics Data System (ADS)

Warnstam, J.

2008-06-01

Uniview is a PC-based software platform for three-dimensional exploration of the Universe and the visualisation of information that is located at any position in this Universe, be it on the surface of the Earth or many light-years away from home. What began as a collaborative project with the American Museum of Natural History1 in New York in 2003 has now evolved into one of the leading visualisation platforms for the planetarium and science centre market with customers in both Europe and USA.

MRI of chemical reactions and processes.

PubMed

Britton, Melanie M

2017-08-01

As magnetic resonance imaging (MRI) can spatially resolve a wealth of molecular information available from nuclear magnetic resonance (NMR), it is able to non-invasively visualise the composition, properties and reactions of a broad range of spatially-heterogeneous molecular systems. Hence, MRI is increasingly finding applications in the study of chemical reactions and processes in a diverse range of environments and technologies. This article will explain the basic principles of MRI and how it can be used to visualise chemical composition and molecular properties, providing an overview of the variety of information available. Examples are drawn from the disciplines of chemistry, chemical engineering, environmental science, physics, electrochemistry and materials science. The review introduces a range of techniques used to produce image contrast, along with the chemical and molecular insight accessible through them. Methods for mapping the distribution of chemical species, using chemical shift imaging or spatially-resolved spectroscopy, are reviewed, as well as methods for visualising physical state, temperature, current density, flow velocities and molecular diffusion. Strategies for imaging materials with low signal intensity, such as those containing gases or low sensitivity nuclei, using compressed sensing, para-hydrogen or polarisation transfer, are discussed. Systems are presented which encapsulate the diversity of chemical and physical parameters observable by MRI, including one- and two-phase flow in porous media, chemical pattern formation, phase transformations and hydrodynamic (fingering) instabilities. Lastly, the emerging area of electrochemical MRI is discussed, with studies presented on the visualisation of electrochemical deposition and dissolution processes during corrosion and the operation of batteries, supercapacitors and fuel cells. Crown Copyright © 2017. Published by Elsevier B.V. All rights reserved.

Online 3D terrain visualisation using Unity 3D game engine: A comparison of different contour intervals terrain data draped with UAV images

NASA Astrophysics Data System (ADS)

Hafiz Mahayudin, Mohd; Che Mat, Ruzinoor

2016-06-01

The main objective of this paper is to discuss on the effectiveness of visualising terrain draped with Unmanned Aerial Vehicle (UAV) images generated from different contour intervals using Unity 3D game engine in online environment. The study area that was tested in this project was oil palm plantation at Sintok, Kedah. The contour data used for this study are divided into three different intervals which are 1m, 3m and 5m. ArcGIS software were used to clip the contour data and also UAV images data to be similar size for the overlaying process. The Unity 3D game engine was used as the main platform for developing the system due to its capabilities which can be launch in different platform. The clipped contour data and UAV images data were process and exported into the web format using Unity 3D. Then process continue by publishing it into the web server for comparing the effectiveness of different 3D terrain data (contour data) draped with UAV images. The effectiveness is compared based on the data size, loading time (office and out-of-office hours), response time, visualisation quality, and frame per second (fps). The results were suggest which contour interval is better for developing an effective online 3D terrain visualisation draped with UAV images using Unity 3D game engine. It therefore benefits decision maker and planner related to this field decide on which contour is applicable for their task.

A direct method to visualise the aryl acylamidase activity on cholinesterases in polyacrylamide gels

PubMed Central

Jaganathan, Lakshmanan; Boopathy, Rathanam

2000-01-01

Background In vertebrates, two types of cholinesterases exist, acetylcholinesterase and butyrylcholinesterase. The function of acetylcholinesterase is to hydrolyse acetylcholine, thereby terminating the neurotransmission at cholinergic synapse, while the precise physiological function of butyrylcholinesterase has not been identified. The presence of cholinesterases in tissues that are not cholinergically innervated indicate that cholinesterases may have functions unrelated to neurotransmission. Furthermore, cholinesterases display a genuine aryl acylamidase activity apart from their predominant acylcholine hydrolase activity. The physiological significance of this aryl acylamidase activity is also not known. The study on the aryl acylamidase has been, in part hampered by the lack of a specific method to visualise this activity. We have developed a method to visualise the aryl acylamidase activity on cholinesterase in polyacrylamide gels. Results The o-nitroaniline liberated from o-nitroacetanilide by the action of aryl acylamidase activity on cholinesterases, in the presence of nitrous acid formed a diazonium compound. This compound gave an azo dye complex with N-(1-napthyl)-ethylenediamine, which appeared as purple bands in polyacrylamide gels. Treating the stained gels with trichloroacetic acid followed by Tris-HCl buffer helped in fixation of the stain in the gels. By using specific inhibitors for acetylcholinesterase and butyrylcholinesterase, respectively, differential staining for the aryl acylamidase activities on butyrylcholinesterase and acetylcholinesterase in a sample containing both these enzymes has been demonstrated. A linear relationship between the intensity of colour developed and activity of the enzyme was obtained. Conclusions A novel method to visualise the aryl acylamidase activity on cholinesterases in polyacrylamide gels has been developed. PMID:11231883

A direct method to visualise the aryl acylamidase activity on cholinesterases in polyacrylamide gels.

PubMed

Jaganathan, L; Boopathy, R

2000-01-01

In vertebrates, two types of cholinesterases exist, acetylcholinesterase and butyrylcholinesterase. The function of acetylcholinesterase is to hydrolyse acetylcholine, thereby terminating the neurotransmission at cholinergic synapse, while the precise physiological function of butyrylcholinesterase has not been identified. The presence of cholinesterases in tissues that are not cholinergically innervated indicate that cholinesterases may have functions unrelated to neurotransmission. Furthermore, cholinesterases display a genuine aryl acylamidase activity apart from their predominant acylcholine hydrolase activity. The physiological significance of this aryl acylamidase activity is also not known. The study on the aryl acylamidase has been, in part hampered by the lack of a specific method to visualise this activity. We have developed a method to visualise the aryl acylamidase activity on cholinesterase in polyacrylamide gels. The o-nitroaniline liberated from o-nitroacetanilide by the action of aryl acylamidase activity on cholinesterases, in the presence of nitrous acid formed a diazonium compound. This compound gave an azo dye complex with N-(1-napthyl)-ethylenediamine, which appeared as purple bands in polyacrylamide gels. Treating the stained gels with trichloroacetic acid followed by Tris-HCl buffer helped in fixation of the stain in the gels. By using specific inhibitors for acetylcholinesterase and butyrylcholinesterase, respectively, differential staining for the aryl acylamidase activities on butyrylcholinesterase and acetylcholinesterase in a sample containing both these enzymes has been demonstrated. A linear relationship between the intensity of colour developed and activity of the enzyme was obtained. A novel method to visualise the aryl acylamidase activity on cholinesterases in polyacrylamide gels has been developed.

Water as neutral oral contrast agent in abdominopelvic CT: comparing effectiveness with Gastrografin in the same patient.

PubMed

Lee, C H; Gu, H Z; Vellayappan, B A; Tan, C H

2016-12-01

Positive oral contrast is no longer deemed necessary for abdominopelvic computed tomography (CT) scans. Studies have shown water to be an equally effective oral contrast agent. However, to our knowledge no study has compared effectiveness between gastrografin and water in the same patient, which will provide a more objective evaluation of the two oral contrast agents. We aim to make a head-to-head comparison of water as neutral oral contrast (OC) against gastrografin as positive OC for abdominopelvic CT scans in the same patient. A retrospective review of 206 abdominopelvic CT scans of 103 patients was performed. The scans were reviewed in consensus by two blinded radiologists. The ability to visualise each abdominopelvic organ, contrastassociated artefacts and small bowel wall delineation, was qualitatively scored on a 5-point scale. Each patient had two sets of scores, one with water and another with gastrografin as OC. Paired scores from the two OCs were evaluated by Wilcoxon signed rank test to determine any significant difference in performance between the two OCs for visualisation of abdominopelvic anatomy on CT. There was significantly better delineation of duodenal wall (p<0.001) and overall visualisation of the duodenum (p=0.011) using water as OC compared to gastrografin. No statistically significant differences were demonstrated between water and gastrografin for visualisation of the rest of the abdominopelvic organs, walldelineation of the rest small bowel and contrast-associated artefacts. Water can be used in place of gastrografin as oral contrast in abdominopelvic CT without compromising visualization of abdominopelvic organs.

Performance characteristics of visualising the cervix in symptomatic young females: a review of primary care records in females with and without cervical cancer.

PubMed

Lim, Anita Wey Wey; Hamilton, Willie; Hollingworth, Antony; Stapley, Sally; Sasieni, Peter

2016-03-01

The current strategy for timely detection of cervical cancer in young females centres on visualising the cervix when females present with gynaecological symptoms, but is based on expert opinion without an evidence base. To assess visualising the cervix in primary care in young females with gynaecological symptoms. A review of primary care records for females in England aged 20-29 years with cervical cancer (nationwide interview-based study) and in the general population (Clinical Practice Research Datalink database). From primary care records the proportion of females was identified with gynaecological symptoms who had documented cervical examination in the year before diagnosis (cancers) and in 1-year age bands (general population). Of these, the proportion was identified that was then referred for suspected malignancy. Only 39% of young females with cervical cancer had documented examination at symptomatic presentation. Visualisation resulted in referral for suspected malignancy for 18% of those examined (95% confidence interval = 5% to 40%). Very few (<1.7%) symptomatic females in the general population had documented cervical examination. None were referred for suspected malignancy at the time. The sensitivity of cervical examination to detect cancer is very low, highlighting the need for better triage tools for primary care. Until such tools are identified GPs should continue to consider cervical cancer when symptoms persist and the cervix is not obviously abnormal on clinical examination. Further research on additional triage tools such as cervical cytology used as a diagnostic aid is needed urgently. © British Journal of General Practice 2016.

Revealing the ecological content of long-duration audio-recordings of the environment through clustering and visualisation.

PubMed

Phillips, Yvonne F; Towsey, Michael; Roe, Paul

2018-01-01

Audio recordings of the environment are an increasingly important technique to monitor biodiversity and ecosystem function. While the acquisition of long-duration recordings is becoming easier and cheaper, the analysis and interpretation of that audio remains a significant research area. The issue addressed in this paper is the automated reduction of environmental audio data to facilitate ecological investigations. We describe a method that first reduces environmental audio to vectors of acoustic indices, which are then clustered. This can reduce the audio data by six to eight orders of magnitude yet retain useful ecological information. We describe techniques to visualise sequences of cluster occurrence (using for example, diel plots, rose plots) that assist interpretation of environmental audio. Colour coding acoustic clusters allows months and years of audio data to be visualised in a single image. These techniques are useful in identifying and indexing the contents of long-duration audio recordings. They could also play an important role in monitoring long-term changes in species abundance brought about by habitat degradation and/or restoration.

Linear and Non-Linear Optical Imaging of Cancer Cells with Silicon Nanoparticles

PubMed Central

Tolstik, Elen; Osminkina, Liubov A.; Akimov, Denis; Gongalsky, Maksim B.; Kudryavtsev, Andrew A.; Timoshenko, Victor Yu.; Heintzmann, Rainer; Sivakov, Vladimir; Popp, Jürgen

2016-01-01

New approaches for visualisation of silicon nanoparticles (SiNPs) in cancer cells are realised by means of the linear and nonlinear optics in vitro. Aqueous colloidal solutions of SiNPs with sizes of about 10–40 nm obtained by ultrasound grinding of silicon nanowires were introduced into breast cancer cells (MCF-7 cell line). Further, the time-varying nanoparticles enclosed in cell structures were visualised by high-resolution structured illumination microscopy (HR-SIM) and micro-Raman spectroscopy. Additionally, the nonlinear optical methods of two-photon excited fluorescence (TPEF) and coherent anti-Stokes Raman scattering (CARS) with infrared laser excitation were applied to study the localisation of SiNPs in cells. Advantages of the nonlinear methods, such as rapid imaging, which prevents cells from overheating and larger penetration depth compared to the single-photon excited HR-SIM, are discussed. The obtained results reveal new perspectives of the multimodal visualisation and precise detection of the uptake of biodegradable non-toxic SiNPs by cancer cells and they are discussed in view of future applications for the optical diagnostics of cancer tumours. PMID:27626408

Web-based visualisation and analysis of 3D electron-microscopy data from EMDB and PDB.

PubMed

Lagerstedt, Ingvar; Moore, William J; Patwardhan, Ardan; Sanz-García, Eduardo; Best, Christoph; Swedlow, Jason R; Kleywegt, Gerard J

2013-11-01

The Protein Data Bank in Europe (PDBe) has developed web-based tools for the visualisation and analysis of 3D electron microscopy (3DEM) structures in the Electron Microscopy Data Bank (EMDB) and Protein Data Bank (PDB). The tools include: (1) a volume viewer for 3D visualisation of maps, tomograms and models, (2) a slice viewer for inspecting 2D slices of tomographic reconstructions, and (3) visual analysis pages to facilitate analysis and validation of maps, tomograms and models. These tools were designed to help non-experts and experts alike to get some insight into the content and assess the quality of 3DEM structures in EMDB and PDB without the need to install specialised software or to download large amounts of data from these archives. The technical challenges encountered in developing these tools, as well as the more general considerations when making archived data available to the user community through a web interface, are discussed. Copyright © 2013 The Authors. Published by Elsevier Inc. All rights reserved.

Genetically targeted 3D visualisation of Drosophila neurons under Electron Microscopy and X-Ray Microscopy using miniSOG

PubMed Central

Ng, Julian; Browning, Alyssa; Lechner, Lorenz; Terada, Masako; Howard, Gillian; Jefferis, Gregory S. X. E.

2016-01-01

Large dimension, high-resolution imaging is important for neural circuit visualisation as neurons have both long- and short-range patterns: from axons and dendrites to the numerous synapses at terminal endings. Electron Microscopy (EM) is the favoured approach for synaptic resolution imaging but how such structures can be segmented from high-density images within large volume datasets remains challenging. Fluorescent probes are widely used to localise synapses, identify cell-types and in tracing studies. The equivalent EM approach would benefit visualising such labelled structures from within sub-cellular, cellular, tissue and neuroanatomical contexts. Here we developed genetically-encoded, electron-dense markers using miniSOG. We demonstrate their ability in 1) labelling cellular sub-compartments of genetically-targeted neurons, 2) generating contrast under different EM modalities, and 3) segmenting labelled structures from EM volumes using computer-assisted strategies. We also tested non-destructive X-ray imaging on whole Drosophila brains to evaluate contrast staining. This enabled us to target specific regions for EM volume acquisition. PMID:27958322

Revealing the ecological content of long-duration audio-recordings of the environment through clustering and visualisation

PubMed Central

Towsey, Michael; Roe, Paul

2018-01-01

Audio recordings of the environment are an increasingly important technique to monitor biodiversity and ecosystem function. While the acquisition of long-duration recordings is becoming easier and cheaper, the analysis and interpretation of that audio remains a significant research area. The issue addressed in this paper is the automated reduction of environmental audio data to facilitate ecological investigations. We describe a method that first reduces environmental audio to vectors of acoustic indices, which are then clustered. This can reduce the audio data by six to eight orders of magnitude yet retain useful ecological information. We describe techniques to visualise sequences of cluster occurrence (using for example, diel plots, rose plots) that assist interpretation of environmental audio. Colour coding acoustic clusters allows months and years of audio data to be visualised in a single image. These techniques are useful in identifying and indexing the contents of long-duration audio recordings. They could also play an important role in monitoring long-term changes in species abundance brought about by habitat degradation and/or restoration. PMID:29494629

Identification of linearised RMS-voltage dip patterns based on clustering in renewable plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

García-Sánchez, Tania; Gómez-Lázaro, Emilio; Muljadi, Edward

Generation units connected to the grid are currently required to meet low-voltage ride-through (LVRT) requirements. In most developed countries, these requirements also apply to renewable sources, mainly wind power plants and photovoltaic installations connected to the grid. This study proposes an alternative characterisation solution to classify and visualise a large number of collected events in light of current limits and requirements. The authors' approach is based on linearised root-mean-square-(RMS)-voltage trajectories, taking into account LRVT requirements, and a clustering process to identify the most likely pattern trajectories. The proposed solution gives extensive information on an event's severity by providing a simplemore » but complete visualisation of the linearised RMS-voltage patterns. In addition, these patterns are compared to current LVRT requirements to determine similarities or discrepancies. A large number of collected events can then be automatically classified and visualised for comparative purposes. Real disturbances collected from renewable sources in Spain are used to assess the proposed solution. Extensive results and discussions are also included in this study.« less

A Framework for Spatial Interaction Analysis Based on Large-Scale Mobile Phone Data

PubMed Central

Li, Weifeng; Cheng, Xiaoyun; Guo, Gaohua

2014-01-01

The overall understanding of spatial interaction and the exact knowledge of its dynamic evolution are required in the urban planning and transportation planning. This study aimed to analyze the spatial interaction based on the large-scale mobile phone data. The newly arisen mass dataset required a new methodology which was compatible with its peculiar characteristics. A three-stage framework was proposed in this paper, including data preprocessing, critical activity identification, and spatial interaction measurement. The proposed framework introduced the frequent pattern mining and measured the spatial interaction by the obtained association. A case study of three communities in Shanghai was carried out as verification of proposed method and demonstration of its practical application. The spatial interaction patterns and the representative features proved the rationality of the proposed framework. PMID:25435865

Application of Frameworks in the Analysis and (Re)design of Interactive Visual Learning Tools

ERIC Educational Resources Information Center

Liang, Hai-Ning; Sedig, Kamran

2009-01-01

Interactive visual learning tools (IVLTs) are software environments that encode and display information visually and allow learners to interact with the visual information. This article examines the application and utility of frameworks in the analysis and design of IVLTs at the micro level. Frameworks play an important role in any design. They…

Visualising elastic anisotropy: theoretical background and computational implementation

NASA Astrophysics Data System (ADS)

Nordmann, J.; Aßmus, M.; Altenbach, H.

2018-02-01

In this article, we present the technical realisation for visualisations of characteristic parameters of the fourth-order elasticity tensor, which is classified by three-dimensional symmetry groups. Hereby, expressions for spatial representations of uc(Young)'s modulus and bulk modulus as well as plane representations of shear modulus and uc(Poisson)'s ratio are derived and transferred into a comprehensible form to computer algebra systems. Additionally, we present approaches for spatial representations of both latter parameters. These three- and two-dimensional representations are implemented into the software MATrix LABoratory. Exemplary representations of characteristic materials complete the present treatise.

Flow visualisation study of spiral flow in the aorta-renal bifurcation.

PubMed

Fulker, David; Javadzadegan, Ashkan; Li, Zuming; Barber, Tracie

2017-10-01

The aim of this study was to analyse the flow dynamics in an idealised model of the aorta-renal bifurcation using flow visualisation, with a particular focus on the effect of aorta-to-renal flow ratio and flow spirality. The recirculation length was longest when there was low flow in the renal artery and smaller in the presence of spiral flow. The results also indicate that patients without spiral flow or who have low flow in the renal artery due to the presence of stenosis may be susceptible to heightened development of atherosclerotic lesions.

Getting Smarter at Managing Avionic Software: The Results of a Two-Day Requirements Elicitation Workshop With DTAES

DTIC Science & Technology

2007-10-01

Visualisation – Diagrammes et graphes : Il y a un manque de bonnes visualisations propres aux systèmes embarqués et en temps réel. Les structures et les...propriétés dynamiques devraient être visualisées. Les diagrammes d’état sont sous-utilisés et plusieurs des diagrammes d’UML et de SysML devraient être...evolution of ObjectTime ∗ (RMC) There is currently a project that is funded by AERAC to study the impact of MDD on avionic software ∗ (RMC) UML is fast

Broadview Radar Altimetry Toolbox

NASA Astrophysics Data System (ADS)

Escolà, Roger; Garcia-Mondejar, Albert; Moyano, Gorka; Roca, Mònica; Terra-Homem, Miguel; Friaças, Ana; Martinho, Fernando; Schrama, Ernst; Naeije, Marc; Ambrozio, Americo; Restano, Marco; Benveniste, Jérôme

2016-04-01

The universal altimetry toolbox, BRAT (Broadview Radar Altimetry Toolbox) which can read all previous and current altimetry missions' data, incorporates now the capability to read the upcoming Sentinel-3 L1 and L2 products. ESA endeavoured to develop and supply this capability to support the users of the future Sentinel-3 SAR Altimetry Mission. BRAT is a collection of tools and tutorial documents designed to facilitate the processing of radar altimetry data. This project started in 2005 from the joint efforts of ESA (European Space Agency) and CNES (Centre National d'Etudes Spatiales), and it is freely available at http://earth.esa.int/brat. The tools enable users to interact with the most common altimetry data formats. The BratGUI is the front-end for the powerful command line tools that are part of the BRAT suite. BRAT can also be used in conjunction with MATLAB/IDL (via reading routines) or in C/C++/Fortran via a programming API, allowing the user to obtain desired data, bypassing the data-formatting hassle. BRAT can be used simply to visualise data quickly, or to translate the data into other formats such as NetCDF, ASCII text files, KML (Google Earth) and raster images (JPEG, PNG, etc.). Several kinds of computations can be done within BRAT involving combinations of data fields that the user can save for posterior reuse or using the already embedded formulas that include the standard oceanographic altimetry formulas. The Radar Altimeter Tutorial, that contains a strong introduction to altimetry, shows its applications in different fields such as Oceanography, Cryosphere, Geodesy, Hydrology among others. Included are also "use cases", with step-by-step examples, on how to use the toolbox in the different contexts. The Sentinel-3 SAR Altimetry Toolbox shall benefit from the current BRAT version. While developing the toolbox we will revamp of the Graphical User Interface and provide, among other enhancements, support for reading the upcoming S3 datasets and specific "use-cases" for SAR altimetry in order to train the users and make them aware of the great potential of SAR altimetry for coastal and inland applications. As for any open source framework, contributions from users having developed their own functions are welcome. The Broadview Radar Altimetry Toolbox is a continuation of the Basic Radar Altimetry Toolbox. While developing the new toolbox we will revamp of the Graphical User Interface and provide, among other enhancements, support for reading the upcoming S3 datasets and specific "use-cases" for SAR altimetry in order to train the users and make them aware of the great potential of SAR altimetry for coastal and inland applications. As for any open source framework, contributions from users having developed their own functions are welcome. The first Release of the new Radar Altimetry Toolbox was published in September 2015. It incorporates the capability to read S3 products as well as the new CryoSat-2 Baseline C. The second Release of the Toolbox, planned for March 2016, will have a new graphical user interface and some visualisation improvements. The third release, planned for September 2016, will incorporate new datasets such as the lake and rivers or the envissat reprocessed, new features regarding data interpolation and formulas updates.

Broadview Radar Altimetry Toolbox

NASA Astrophysics Data System (ADS)

Mondéjar, Albert; Benveniste, Jérôme; Naeije, Marc; Escolà, Roger; Moyano, Gorka; Roca, Mònica; Terra-Homem, Miguel; Friaças, Ana; Martinho, Fernando; Schrama, Ernst; Ambrózio, Américo; Restano, Marco

2016-07-01

The universal altimetry toolbox, BRAT (Broadview Radar Altimetry Toolbox) which can read all previous and current altimetry missions' data, incorporates now the capability to read the upcoming Sentinel-3 L1 and L2 products. ESA endeavoured to develop and supply this capability to support the users of the future Sentinel-3 SAR Altimetry Mission. BRAT is a collection of tools and tutorial documents designed to facilitate the processing of radar altimetry data. This project started in 2005 from the joint efforts of ESA (European Space Agency) and CNES (Centre National d'Études Spatiales), and it is freely available at http://earth.esa.int/brat. The tools enable users to interact with the most common altimetry data formats. The BratGUI is the front-end for the powerful command line tools that are part of the BRAT suite. BRAT can also be used in conjunction with MATLAB/IDL (via reading routines) or in C/C++/Fortran via a programming API, allowing the user to obtain desired data, bypassing the data-formatting hassle. BRAT can be used simply to visualise data quickly, or to translate the data into other formats such as NetCDF, ASCII text files, KML (Google Earth) and raster images (JPEG, PNG, etc.). Several kinds of computations can be done within BRAT involving combinations of data fields that the user can save for posterior reuse or using the already embedded formulas that include the standard oceanographic altimetry formulas. The Radar Altimeter Tutorial, that contains a strong introduction to altimetry, shows its applications in different fields such as Oceanography, Cryosphere, Geodesy, Hydrology among others. Included are also "use cases", with step-by-step examples, on how to use the toolbox in the different contexts. The Sentinel-3 SAR Altimetry Toolbox shall benefit from the current BRAT version. While developing the toolbox we will revamp of the Graphical User Interface and provide, among other enhancements, support for reading the upcoming S3 datasets and specific "use-cases" for SAR altimetry in order to train the users and make them aware of the great potential of SAR altimetry for coastal and inland applications. As for any open source framework, contributions from users having developed their own functions are welcome. The Broadview Radar Altimetry Toolbox is a continuation of the Basic Radar Altimetry Toolbox. While developing the new toolbox we will revamp of the Graphical User Interface and provide, among other enhancements, support for reading the upcoming S3 datasets and specific "use-cases" for SAR altimetry in order to train the users and make them aware of the great potential of SAR altimetry for coastal and inland applications. As for any open source framework, contributions from users having developed their own functions are welcome. The first Release of the new Radar Altimetry Toolbox was published in September 2015. It incorporates the capability to read S3 products as well as the new CryoSat-2 Baseline C. The second Release of the Toolbox, planned for March 2016, will have a new graphical user interface and some visualisation improvements. The third release, planned for September 2016, will incorporate new datasets such as the lake and rivers or the EnviSat reprocessed, new features regarding data interpolation and formulas updates.

airGRteaching: an R-package designed for teaching hydrology with lumped hydrological models

NASA Astrophysics Data System (ADS)

Thirel, Guillaume; Delaigue, Olivier; Coron, Laurent; Andréassian, Vazken; Brigode, Pierre

2017-04-01

Lumped hydrological models are useful and convenient tools for research, engineering and educational purposes. They propose catchment-scale representations of the precipitation-discharge relationship. Thanks to their limited data requirements, they can be easily implemented and run. With such models, it is possible to simulate a number of hydrological key processes over the catchment with limited structural and parametric complexity, typically evapotranspiration, runoff, underground losses, etc. The Hydrology Group at Irstea (Antony) has been developing a suite of rainfall-runoff models over the past 30 years. This resulted in a suite of models running at different time steps (from hourly to annual) applicable for various issues including water balance estimation, forecasting, simulation of impacts and scenario testing. Recently, Irstea has developed an easy-to-use R-package (R Core Team, 2016), called airGR (Coron et al., 2016, 2017), to make these models widely available. Although its initial target public was hydrological modellers, the package is already used for educational purposes. Indeed, simple models allow for rapidly visualising the effects of parameterizations and model components on flows hydrographs. In order to avoid the difficulties that students may have when manipulating R and datasets, we developed (Delaigue and Coron, 2016): - Three simplified functions to prepare data, calibrate a model and run a simulation - Simplified and dynamic plot functions - A shiny (Chang et al., 2016) interface that connects this R-package to a browser-based visualisation tool. On this interface, the students can use different hydrological models (including the possibility to use a snow-accounting model), manually modify their parameters and automatically calibrate their parameters with diverse objective functions. One of the visualisation tabs of the interface includes observed precipitation and temperature, simulated snowpack (if any), observed and simulated discharges, which are updated immediately (a calibration only needs a couple of seconds or less, a simulation is almost immediate). In addition, time series of internal variables, live-visualisation of internal variables evolution and performance statistics are provided. This interface allows for hands-on exercises that can include for instance the analysis by students of: - The effects of each parameter and model components on simulated discharge - The effects of objective functions based on high flows- or low flows-focused criteria on simulated discharge - The seasonality of the model components. References Winston Chang, Joe Cheng, JJ Allaire, Yihui Xie and Jonathan McPherson (2016). shiny: Web Application Framework for R. R package version 0.13.2. https://CRAN.R-project.org/package=shiny Coron L., Thirel G., Perrin C., Delaigue O., Andréassian V., airGR: a suite of lumped hydrological models in an R-package, Environmental Modelling and software, 2017, submitted. Coron, L., Perrin, C. and Michel, C. (2016). airGR: Suite of GR hydrological models for precipitation-runoff modelling. R package version 1.0.3. https://webgr.irstea.fr/airGR/?lang=en. Olivier Delaigue and Laurent Coron (2016). airGRteaching: Tools to simplify the use of the airGR hydrological package by students. R package version 0.0.1. https://webgr.irstea.fr/airGR/?lang=en R Core Team (2016). R: A language and environment for statistical computing. R Foundation for Statistical Computing, Vienna, Austria. URL https://www.R-project.org/.

An Observation Analysis Tool for time-series analysis and sensor management in the FREEWAT GIS environment for water resources management

NASA Astrophysics Data System (ADS)

Cannata, Massimiliano; Neumann, Jakob; Cardoso, Mirko; Rossetto, Rudy; Foglia, Laura; Borsi, Iacopo

2017-04-01

In situ time-series are an important aspect of environmental modelling, especially with the advancement of numerical simulation techniques and increased model complexity. In order to make use of the increasing data available through the requirements of the EU Water Framework Directive, the FREEWAT GIS environment incorporates the newly developed Observation Analysis Tool for time-series analysis. The tool is used to import time-series data into QGIS from local CSV files, online sensors using the istSOS service, or MODFLOW model result files and enables visualisation, pre-processing of data for model development, and post-processing of model results. OAT can be used as a pre-processor for calibration observations, integrating the creation of observations for calibration directly from sensor time-series. The tool consists in an expandable Python library of processing methods and an interface integrated in the QGIS FREEWAT plug-in which includes a large number of modelling capabilities, data management tools and calibration capacity.

Prompting students to make socioscientific decisions: embedding metacognitive guidance in an e-learning environment

NASA Astrophysics Data System (ADS)

Hsu, Ying-Shao; Lin, Shu-Sheng

2017-05-01

This study aimed at improving the decision-making (DM) skills of 11th graders by incorporating a DM framework, visualisation tools, collaboration, and metacognitive guidance into a socioscientific issue context. Two classes, the experimental group (embedded metacognitive guidance, N = 42) and the comparison group (no metacognitive guidance, N = 32), were involved in the implementation of the experimental methodology. An open-ended test and worksheets were developed to assess the students' DM skills. The results indicated that the two versions of the DM learning modules had similar effects on the improvement in the students' DM skills, but there were significant differences in their overall skills in DM (Z = -6.410, p < .001), generating criteria (Z = -6.956, p < .001), and evaluating DM results (Z = -2.533, p < .011) based on the student responses on the worksheets. These findings indicate that further studies need to explore the mechanism of metacognitive guidance for students with different socioscientific issue DM skills in e-learning environments.

Technical integration of hippocampus, Basal Ganglia and physical models for spatial navigation.

PubMed

Fox, Charles; Humphries, Mark; Mitchinson, Ben; Kiss, Tamas; Somogyvari, Zoltan; Prescott, Tony

2009-01-01

Computational neuroscience is increasingly moving beyond modeling individual neurons or neural systems to consider the integration of multiple models, often constructed by different research groups. We report on our preliminary technical integration of recent hippocampal formation, basal ganglia and physical environment models, together with visualisation tools, as a case study in the use of Python across the modelling tool-chain. We do not present new modeling results here. The architecture incorporates leaky-integrator and rate-coded neurons, a 3D environment with collision detection and tactile sensors, 3D graphics and 2D plots. We found Python to be a flexible platform, offering a significant reduction in development time, without a corresponding significant increase in execution time. We illustrate this by implementing a part of the model in various alternative languages and coding styles, and comparing their execution times. For very large-scale system integration, communication with other languages and parallel execution may be required, which we demonstrate using the BRAHMS framework's Python bindings.

Ship wakes and spectrograms: mathematical modelling and experimental data for finite-depth flows

NASA Astrophysics Data System (ADS)

McCue, Scott; Pethiyagoda, Ravindra; Moroney, Timothy; Macfarlane, Gregor; Binns, Jonathan

2017-11-01

We are concerned with how properties of a ship wake can be extracted from surface height data collected at a single point as the ship travels past. The tool we use is a spectrogram, which is a heat map that visualises the time-dependent frequency spectrum of the surface height signal. In this talk, the focus will be on presenting the theoretical framework which involves an idealised mathematical model with a pressure distribution applied to the surface. A geometric argument based on linear water wave theory provides encouraging results for both subcritical and supercritical flow regimes. We then summarise some recent findings obtained by comparing our analysis to experimental data collected at the Australian Maritime College for various sailing speeds and hull shapes*. Our work has the potential to inform ship design, the detection of irregular vessels, and how coastal damage is attributed to specific vessels in shipping channels. We acknowledge support of the Australian Research Council via the Discovery Project DP140100933.

The Issues Framework: Situating Graduate Teaching Assistant-Student Interactions in Physics Problem Solving

NASA Astrophysics Data System (ADS)

Westlander, Meghan Joanne

Interactive engagement environments are critical to students' conceptual learning gains, and often the instructor is ultimately responsible for the creation of that environment in the classroom. When those instructors are graduate teaching assistants (GTAs), one of the primary ways in which they can promote interactive engagement is through their interactions with students. Much of the prior research on physics GTA-student interactions focuses on GTA training programs (e.g. Ezrailson (2004); Smith, Ward, and Rosenshein (1977)) or on GTAs' specific actions and beliefs (e.g. West, Paul, Webb, and Potter (2013); Goertzen (2010); Spike and Finkelstein (2012a)). Research on students' ideas and behaviors within and surrounding those interactions is limited but important to obtaining a more complete understanding of how GTAs promote an interactive environment. In order to begin understanding this area, I developed the Issues Framework to examine how GTA-student interactions are situated in students' processes during physics problem solving activities. Using grounded theory, the Issues Framework emerged from an analysis of the relationships between GTA-student interactions and the students procedures and expressions of physics content in and surrounding those interactions. This study is focused on introducing the Issues Framework and the insight it can provide into GTA-student interactions and students' processes. The framework is general in nature and has a visually friendly design making it a useful tool for consolidating complex data and quickly pattern-matching important pieces of a complex process. Four different categories of Issues emerged spanning the problem solving process: (1) Getting Started, (2) Solution Approach, (3) Unit Conversions, and (4) Other. The framework allowed for identification of the specific contents of the Issues in each category as well as revealing the common stories of students' processes and how the interactions were situated in those processes in each category. Through the stories, the Issues Framework revealed processes in which students often focused narrowly on procedures with the physics content expressed through their procedures and only sometimes through conceptual discussions. Interactions with the GTA affected changes in students' processes, typically leading students to correct their procedures. The interactions often focused narrowly on procedures as well but introduced conceptual discussions more often than students did surrounding the interactions. Comparing stories across GTAs instead of across categories revealed one GTA who, more often than other GTAs, used conceptual discussion and encouraged students' participation in the interactions. The Issues Framework still needs continued refinement and testing. However, it represents a significant step toward understanding GTA-student interactions from the perspective of students' processes in physics problem solving.

Time-of-flight magnetic resonance angiography (TOF-MRA) of the normal equine head.

PubMed

Manso-Díaz, G; García-Real, M I; Casteleyn, C; San-Román, F; Taeymans, O

2013-03-01

Noncontrast magnetic resonance angiography (MRA) is widely used in human and small animal medicine. However, this technique has not yet been described in the horse, and compared to other angiographic techniques MRA could be more cost efficient and potentially safer. The aim of this study was to provide a comprehensive anatomical reference of the normal equine head vasculature using a noncontrast MRA technique, on both low- and high-field MRI. Five healthy adult horses were examined, 4 with a low-field magnet (0.23T) and the remaining one with a high-field magnet (1.5T). The magnetic resonance angiography sequence used was TOF (time-of-flight) 2D-MRA and CT images of a vascular corrosion cast were subsequently used as anatomical references. The MRA imaging protocol provided good visualisation of all major intra- and extracranial vessels down to a size of approximately 2 mm in diameter on both low- and high-field systems. This resulted in identification of vessels to the order of 3rd-4th branches of ramification. The visibility of the arteries was higher than of the veins, which showed lower signal intensity. Overall, MRA obtained with the high-field protocol provided better visualisation of the arteries, showing all the small arterial branches with a superior resolution. The use of a specific vascular sequence such as TOF 2D-MRA allows good visualisation of the equine head vasculature and eliminates the need for contrast media for MRA. Magnetic resonance angiography allows for visualisation of the vasculature of the equine head. Vessel morphology, symmetry and size can be evaluated and this may possibly play a role in preoperative planning or characterisation of diseases of the head, such as neoplasia or guttural pouch mycosis. © 2012 EVJ Ltd.

A study of general practitioners' perspectives on electronic medical records systems in NHSScotland.

PubMed

Bouamrane, Matt-Mouley; Mair, Frances S

2013-05-21

Primary care doctors in NHSScotland have been using electronic medical records within their practices routinely for many years. The Scottish Health Executive eHealth strategy (2008-2011) has recently brought radical changes to the primary care computing landscape in Scotland: an information system (GPASS) which was provided free-of-charge by NHSScotland to a majority of GP practices has now been replaced by systems provided by two approved commercial providers. The transition to new electronic medical records had to be completed nationally across all health-boards by March 2012. We carried out 25 in-depth semi-structured interviews with primary care doctors to elucidate GPs' perspectives on their practice information systems and collect more general information on management processes in the patient surgical pathway in NHSScotland. We undertook a thematic analysis of interviewees' responses, using Normalisation Process Theory as the underpinning conceptual framework. The majority of GPs' interviewed considered that electronic medical records are an integral and essential element of their work during the consultation, playing a key role in facilitating integrated and continuity of care for patients and making clinical information more accessible. However, GPs expressed a number of reservations about various system functionalities - for example: in relation to usability, system navigation and information visualisation. Our study highlights that while electronic information systems are perceived as having important benefits, there remains substantial scope to improve GPs' interaction and overall satisfaction with these systems. Iterative user-centred improvements combined with additional training in the use of technology would promote an increased understanding, familiarity and command of the range of functionalities of electronic medical records among primary care doctors.

A study of general practitioners’ perspectives on electronic medical records systems in NHSScotland

PubMed Central

2013-01-01

Background Primary care doctors in NHSScotland have been using electronic medical records within their practices routinely for many years. The Scottish Health Executive eHealth strategy (2008-2011) has recently brought radical changes to the primary care computing landscape in Scotland: an information system (GPASS) which was provided free-of-charge by NHSScotland to a majority of GP practices has now been replaced by systems provided by two approved commercial providers. The transition to new electronic medical records had to be completed nationally across all health-boards by March 2012. Methods We carried out 25 in-depth semi-structured interviews with primary care doctors to elucidate GPs’ perspectives on their practice information systems and collect more general information on management processes in the patient surgical pathway in NHSScotland. We undertook a thematic analysis of interviewees’ responses, using Normalisation Process Theory as the underpinning conceptual framework. Results The majority of GPs’ interviewed considered that electronic medical records are an integral and essential element of their work during the consultation, playing a key role in facilitating integrated and continuity of care for patients and making clinical information more accessible. However, GPs expressed a number of reservations about various system functionalities – for example: in relation to usability, system navigation and information visualisation. Conclusion Our study highlights that while electronic information systems are perceived as having important benefits, there remains substantial scope to improve GPs’ interaction and overall satisfaction with these systems. Iterative user-centred improvements combined with additional training in the use of technology would promote an increased understanding, familiarity and command of the range of functionalities of electronic medical records among primary care doctors. PMID:23688255

Non-communicable diseases in Indian slums: re-framing the Social Determinants of Health.

PubMed

Lumagbas, Lily Beth; Coleman, Harry Laurence Selby; Bunders, Joske; Pariente, Antoine; Belonje, Anne; de Cock Buning, Tjard

2018-01-01

The epidemic of non-communicable diseases (NCDs) in slums has pushed its residents to heightened vulnerability. The Social Determinants of Health (SDH) framework has been used to understand the social dynamics and impact of NCDs, especially in poorly resourced communities. Whilst the SDH has helped to discredit the characterisation of NCDs as diseases of affluence, its impact on policy has been less definite. Given the multitude of factors that interact in the presentation of NCDs, operationalising the SDH for policies and programmes that account for the contextual complexity of slums has stalled. To organise the complex networks of relations between SDH in slums so as to identify options for Indian municipal policy that are feasible to implement in the short term. The study reviews the literature describing SDH in Indian slums, specifically those that establish causal relations between SDH and NCDs. Root cause analysis was then used to organise the identified relations of SDH and NCDs. Although poverty remains the largest structural determinant of health in slums, the multi-dimensional relations between SDH and NCDs are structured around four themes that describe the dynamics of slums, namely scarce clean water, low education, physical (in)activity and transportation. From the reviewed literature, four logic trees visualising the relations between SDH in slums and NCDs were constructed. The logic trees separate symptomatic problems from their more distal causes, and recommendations were formulated based on features of these relationships that are amenable to policy intervention. Root cause analysis provides a means to focus the lens of examination of SDH, as evidenced here for Indian slums. It provides a guide for the development of policies that are grounded in the actual health concerns of people in slums, and takes account of the complex pathways through which diseases are socially constituted.

Kazakhstan's Environment-Health system, a Big Data challenge

NASA Astrophysics Data System (ADS)

Vitolo, Claudia; Bella Gazdiyeva, Bella; Tucker, Allan; Russell, Andrew; Ali, Maged; Althonayan, Abraham

2016-04-01

Kazakhstan has witnessed a remarkable economic development in the past 15 years, becoming an upper-middle-income country. However it is still widely regarded as a developing nation, partially because of its population's low life expectancy which is 5 years below the average in similar economies. The environment is in a rather fragile state, affected by soil, water, air pollution, radioactive contamination and climate change. However, Kazakhstan's government is moving towards clean energy and environmental protection and calling on scientists to help prioritise investments. The British Council-funded "Kazakhstan's Environment-Health Risk Analysis (KEHRA)" project is one of the recently launched initiatives to support Kazakhstan healthier future. The underlying hypothesis of this research is that the above mentioned factors (air/water/soil pollution, etc.) affecting public health almost certainly do not act independently but rather trigger and exacerbate each other. Exploring the environment-health links in a multi-dimensional framework is a typical Big Data problem, in which the volume and variety of the data needed poses technical as well as scientific challenges. In Kazakhstan, the complexities related to managing and analysing Big Data are worsened by a number of obstacles at the data acquisition step: most of the data is not in digital form, spatial and temporal attributes are often ambiguous and the re-use and re-purpose of the information is subject to restrictive licenses and other mechanisms of control. In this work, we document the first steps taken towards building an understanding of the complex environment-health system in Kazakhstan, using interactive visualisation tools to identify and compare hot-spots of pollution and poor health outcomes, Big Data and web technologies to collect, manage and explore available information. In the future, the knowledge acquired will be modelled to develop evidence-based recommendation systems for decision makers in Kazakhstan.

A Novel and Freely Available Interactive 3d Model of the Internal Carotid Artery.

PubMed

Valera-Melé, Marc; Puigdellívol-Sánchez, Anna; Mavar-Haramija, Marija; Juanes-Méndez, Juan A; San-Román, Luis; de Notaris, Matteo; Prats-Galino, Alberto

2018-03-05

We describe a new and freely available 3D interactive model of the intracranial internal carotid artery (ICA) and the skull base that also allows to display and compare its main segment classifications. High-resolution 3D human angiography (isometric voxel's size 0.36 mm) and Computed Tomography angiography images were exported to Virtual Reality Modeling Language (VRML) format for processing in a 3D software platform and embedding in a 3D Portable Document Format (PDF) document that can be freely downloaded at http://diposit.ub.edu/dspace/handle/2445/112442 and runs under Acrobat Reader on Mac and Windows computers and Windows 10 tablets. The 3D-PDF allows for visualisation and interaction through JavaScript-based functions (including zoom, rotation, selective visualization and transparentation of structures or a predefined sequence view of the main segment classifications if desired). The ICA and its main branches and loops, the Gasserian ganglion, the petrolingual ligament and the proximal and distal dural rings within the skull base environment (anterior and posterior clinoid processes, silla turcica, ethmoid and sphenoid bones, orbital fossae) may be visualized from different perspectives. This interactive 3D-PDF provides virtual views of the ICA and becomes an innovative tool to improve the understanding of the neuroanatomy of the ICA and surrounding structures.

Analysis tools for the interplay between genome layout and regulation.

PubMed

Bouyioukos, Costas; Elati, Mohamed; Képès, François

2016-06-06

Genome layout and gene regulation appear to be interdependent. Understanding this interdependence is key to exploring the dynamic nature of chromosome conformation and to engineering functional genomes. Evidence for non-random genome layout, defined as the relative positioning of either co-functional or co-regulated genes, stems from two main approaches. Firstly, the analysis of contiguous genome segments across species, has highlighted the conservation of gene arrangement (synteny) along chromosomal regions. Secondly, the study of long-range interactions along a chromosome has emphasised regularities in the positioning of microbial genes that are co-regulated, co-expressed or evolutionarily correlated. While one-dimensional pattern analysis is a mature field, it is often powerless on biological datasets which tend to be incomplete, and partly incorrect. Moreover, there is a lack of comprehensive, user-friendly tools to systematically analyse, visualise, integrate and exploit regularities along genomes. Here we present the Genome REgulatory and Architecture Tools SCAN (GREAT:SCAN) software for the systematic study of the interplay between genome layout and gene expression regulation. SCAN is a collection of related and interconnected applications currently able to perform systematic analyses of genome regularities as well as to improve transcription factor binding sites (TFBS) and gene regulatory network predictions based on gene positional information. We demonstrate the capabilities of these tools by studying on one hand the regular patterns of genome layout in the major regulons of the bacterium Escherichia coli. On the other hand, we demonstrate the capabilities to improve TFBS prediction in microbes. Finally, we highlight, by visualisation of multivariate techniques, the interplay between position and sequence information for effective transcription regulation.

Design preferences and cognitive styles: experimentation by automated website synthesis.

PubMed

Leung, Siu-Wai; Lee, John; Johnson, Chris; Robertson, David

2012-06-29

This article aims to demonstrate computational synthesis of Web-based experiments in undertaking experimentation on relationships among the participants' design preference, rationale, and cognitive test performance. The exemplified experiments were computationally synthesised, including the websites as materials, experiment protocols as methods, and cognitive tests as protocol modules. This work also exemplifies the use of a website synthesiser as an essential instrument enabling the participants to explore different possible designs, which were generated on the fly, before selection of preferred designs. The participants were given interactive tree and table generators so that they could explore some different ways of presenting causality information in tables and trees as the visualisation formats. The participants gave their preference ratings for the available designs, as well as their rationale (criteria) for their design decisions. The participants were also asked to take four cognitive tests, which focus on the aspects of visualisation and analogy-making. The relationships among preference ratings, rationale, and the results of cognitive tests were analysed by conservative non-parametric statistics including Wilcoxon test, Krustal-Wallis test, and Kendall correlation. In the test, 41 of the total 64 participants preferred graphical (tree-form) to tabular presentation. Despite the popular preference for graphical presentation, the given tabular presentation was generally rated to be easier than graphical presentation to interpret, especially by those who were scored lower in the visualization and analogy-making tests. This piece of evidence helps generate a hypothesis that design preferences are related to specific cognitive abilities. Without the use of computational synthesis, the experiment setup and scientific results would be impractical to obtain.

Active learning in the lecture theatre using 3D printed objects.

PubMed

Smith, David P

2016-01-01

The ability to conceptualize 3D shapes is central to understanding biological processes. The concept that the structure of a biological molecule leads to function is a core principle of the biochemical field. Visualisation of biological molecules often involves vocal explanations or the use of two dimensional slides and video presentations. A deeper understanding of these molecules can however be obtained by the handling of objects. 3D printed biological molecules can be used as active learning tools to stimulate engagement in large group lectures. These models can be used to build upon initial core knowledge which can be delivered in either a flipped form or a more didactic manner. Within the teaching session the students are able to learn by handling, rotating and viewing the objects to gain an appreciation, for example, of an enzyme's active site or the difference between the major and minor groove of DNA. Models and other artefacts can be handled in small groups within a lecture theatre and act as a focal point to generate conversation. Through the approach presented here core knowledge is first established and then supplemented with high level problem solving through a "Think-Pair-Share" cooperative learning strategy. The teaching delivery was adjusted based around experiential learning activities by moving the object from mental cognition and into the physical environment. This approach led to students being able to better visualise biological molecules and a positive engagement in the lecture. The use of objects in teaching allows the lecturer to create interactive sessions that both challenge and enable the student.

GOexpress: an R/Bioconductor package for the identification and visualisation of robust gene ontology signatures through supervised learning of gene expression data.

PubMed

Rue-Albrecht, Kévin; McGettigan, Paul A; Hernández, Belinda; Nalpas, Nicolas C; Magee, David A; Parnell, Andrew C; Gordon, Stephen V; MacHugh, David E

2016-03-11

Identification of gene expression profiles that differentiate experimental groups is critical for discovery and analysis of key molecular pathways and also for selection of robust diagnostic or prognostic biomarkers. While integration of differential expression statistics has been used to refine gene set enrichment analyses, such approaches are typically limited to single gene lists resulting from simple two-group comparisons or time-series analyses. In contrast, functional class scoring and machine learning approaches provide powerful alternative methods to leverage molecular measurements for pathway analyses, and to compare continuous and multi-level categorical factors. We introduce GOexpress, a software package for scoring and summarising the capacity of gene ontology features to simultaneously classify samples from multiple experimental groups. GOexpress integrates normalised gene expression data (e.g., from microarray and RNA-seq experiments) and phenotypic information of individual samples with gene ontology annotations to derive a ranking of genes and gene ontology terms using a supervised learning approach. The default random forest algorithm allows interactions between all experimental factors, and competitive scoring of expressed genes to evaluate their relative importance in classifying predefined groups of samples. GOexpress enables rapid identification and visualisation of ontology-related gene panels that robustly classify groups of samples and supports both categorical (e.g., infection status, treatment) and continuous (e.g., time-series, drug concentrations) experimental factors. The use of standard Bioconductor extension packages and publicly available gene ontology annotations facilitates straightforward integration of GOexpress within existing computational biology pipelines.

Summarising climate and air quality (ozone) data on self-organising maps: a Sydney case study.

PubMed

Jiang, Ningbo; Betts, Alan; Riley, Matt

2016-02-01

This paper explores the classification and visualisation utility of the self-organising map (SOM) method in the context of New South Wales (NSW), Australia, using gridded NCEP/NCAR geopotential height reanalysis for east Australia, together with multi-site meteorological and air quality data for Sydney from the NSW Office of Environment and Heritage Air Quality Monitoring Network. A twice-daily synoptic classification has been derived for east Australia for the period of 1958-2012. The classification has not only reproduced the typical synoptic patterns previously identified in the literature but also provided an opportunity to visualise the subtle, non-linear change in the eastward-migrating synoptic systems influencing NSW (including Sydney). The summarisation of long-term, multi-site air quality/meteorological data from the Sydney basin on the SOM plane has identified a set of typical air pollution/meteorological spatial patterns in the region. Importantly, the examination of these patterns in relation to synoptic weather types has provided important visual insights into how local and synoptic meteorological conditions interact with each other and affect the variability of air quality in tandem. The study illustrates that while synoptic circulation types are influential, the within-type variability in mesoscale flows plays a critical role in determining local ozone levels in Sydney. These results indicate that the SOM can be a useful tool for assessing the impact of weather and climatic conditions on air quality in the regional airshed. This study further promotes the use of the SOM method in environmental research.

Active learning in the lecture theatre using 3D printed objects

PubMed Central

Smith, David P.

2016-01-01

The ability to conceptualize 3D shapes is central to understanding biological processes. The concept that the structure of a biological molecule leads to function is a core principle of the biochemical field. Visualisation of biological molecules often involves vocal explanations or the use of two dimensional slides and video presentations. A deeper understanding of these molecules can however be obtained by the handling of objects. 3D printed biological molecules can be used as active learning tools to stimulate engagement in large group lectures. These models can be used to build upon initial core knowledge which can be delivered in either a flipped form or a more didactic manner. Within the teaching session the students are able to learn by handling, rotating and viewing the objects to gain an appreciation, for example, of an enzyme’s active site or the difference between the major and minor groove of DNA. Models and other artefacts can be handled in small groups within a lecture theatre and act as a focal point to generate conversation. Through the approach presented here core knowledge is first established and then supplemented with high level problem solving through a "Think-Pair-Share" cooperative learning strategy. The teaching delivery was adjusted based around experiential learning activities by moving the object from mental cognition and into the physical environment. This approach led to students being able to better visualise biological molecules and a positive engagement in the lecture. The use of objects in teaching allows the lecturer to create interactive sessions that both challenge and enable the student. PMID:27366318

Supporting virtual enterprise design by a web-based information model

NASA Astrophysics Data System (ADS)

Li, Dong; Barn, Balbir; McKay, Alison; de Pennington, Alan

2001-10-01

Development of IT and its applications have led to significant changes in business processes. To pursue agility, flexibility and best service to customers, enterprises focus on their core competence and dynamically build relationships with partners to form virtual enterprises as customer driven temporary demand chains/networks. Building the networked enterprise needs responsively interactive decisions instead of a single-direction partner selection process. Benefits and risks in the combination should be systematically analysed, and aggregated information about value-adding abilities and risks of networks needs to be derived from interactions of all partners. In this research, a hierarchical information model to assess partnerships for designing virtual enterprises was developed. Internet technique has been applied to the evaluation process so that interactive decisions can be visualised and made responsively during the design process. The assessment is based on the process which allows each partner responds to requirements of the virtual enterprise by planning its operational process as a bidder. The assessment is then produced by making an aggregated value to represent prospect of the combination of partners given current bidding. Final design is a combination of partners with the greatest total value-adding capability and lowest risk.

Structural characterization of framework-gas interactions in the metal-organic framework Co2(dobdc) by in situ single-crystal X-ray diffraction.

PubMed

Gonzalez, Miguel I; Mason, Jarad A; Bloch, Eric D; Teat, Simon J; Gagnon, Kevin J; Morrison, Gregory Y; Queen, Wendy L; Long, Jeffrey R

2017-06-01

The crystallographic characterization of framework-guest interactions in metal-organic frameworks allows the location of guest binding sites and provides meaningful information on the nature of these interactions, enabling the correlation of structure with adsorption behavior. Here, techniques developed for in situ single-crystal X-ray diffraction experiments on porous crystals have enabled the direct observation of CO, CH 4 , N 2 , O 2 , Ar, and P 4 adsorption in Co 2 (dobdc) (dobdc 4- = 2,5-dioxido-1,4-benzenedicarboxylate), a metal-organic framework bearing coordinatively unsaturated cobalt(ii) sites. All these molecules exhibit such weak interactions with the high-spin cobalt(ii) sites in the framework that no analogous molecular structures exist, demonstrating the utility of metal-organic frameworks as crystalline matrices for the isolation and structural determination of unstable species. Notably, the Co-CH 4 and Co-Ar interactions observed in Co 2 (dobdc) represent, to the best of our knowledge, the first single-crystal structure determination of a metal-CH 4 interaction and the first crystallographically characterized metal-Ar interaction. Analysis of low-pressure gas adsorption isotherms confirms that these gases exhibit mainly physisorptive interactions with the cobalt(ii) sites in Co 2 (dobdc), with differential enthalpies of adsorption as weak as -17(1) kJ mol -1 (for Ar). Moreover, the structures of Co 2 (dobdc)·3.8N 2 , Co 2 (dobdc)·5.9O 2 , and Co 2 (dobdc)·2.0Ar reveal the location of secondary (N 2 , O 2 , and Ar) and tertiary (O 2 ) binding sites in Co 2 (dobdc), while high-pressure CO 2 , CO, CH 4 , N 2 , and Ar adsorption isotherms show that these binding sites become more relevant at elevated pressures.

Drug-induced sedation endoscopy (DISE) classification systems: a systematic review and meta-analysis.

PubMed

Dijemeni, Esuabom; D'Amone, Gabriele; Gbati, Israel

2017-12-01

Drug-induced sedation endoscopy (DISE) classification systems have been used to assess anatomical findings on upper airway obstruction, and decide and plan surgical treatments and act as a predictor for surgical treatment outcome for obstructive sleep apnoea management. The first objective is to identify if there is a universally accepted DISE grading and classification system for analysing DISE findings. The second objective is to identify if there is one DISE grading and classification treatment planning framework for deciding appropriate surgical treatment for obstructive sleep apnoea (OSA). The third objective is to identify if there is one DISE grading and classification treatment outcome framework for determining the likelihood of success for a given OSA surgical intervention. A systematic review was performed to identify new and significantly modified DISE classification systems: concept, advantages and disadvantages. Fourteen studies proposing a new DISE classification system and three studies proposing a significantly modified DISE classification were identified. None of the studies were based on randomised control trials. DISE is an objective method for visualising upper airway obstruction. The classification and assessment of clinical findings based on DISE is highly subjective due to the increasing number of DISE classification systems. Hence, this creates a growing divergence in surgical treatment planning and treatment outcome. Further research on a universally accepted objective DISE assessment is critically needed.

A novel multimedia tool to improve bedside teaching of cardiac auscultation

PubMed Central

Woywodt, A; Herrmann, A; Kielstein, J; Haller, H; Haubitz, M; Purnhagen, H

2004-01-01

Training in cardiac auscultation is a core element of undergraduate teaching but recent studies have documented a remarkable decline in auscultatory skills. Therefore there is an interest in new ways to teach cardiac auscultation. In analogy to phonocardiography, an electronic system for simultaneous auscultation and visualisation of murmurs was sought. For this purpose, an electronic stethoscope was linked to a laptop computer and software created to visualise auscultatory findings. In a preliminary trial in undergraduate students, this approach greatly facilitated teaching. Amalgamating traditional phonocardiography with a multimedia approach, this system represents a novel tool for bedside teaching of cardiac auscultation. PMID:15192171

[The anatomy of a reduced skull model--visualisation of Leonardo da Vinci's anthropology].

PubMed

Ahner, E

2008-04-02

The article focuses on a rare example of a miniature skull of unknown origin. The profoundness of the anatomical details, conjoint with outstanding virtuosity, reminds of Leonardo da Vinci's anatomical skull studies and asks for additional interpretation beside the emblematic "memento mori"-character. Following the miscellaneous topics of his skull studies an anatomical-anthropological interpretation is proposed. For such a project the mergence of anthropology, history of medicine and history of art was mandatory. Concerning some discrepancies within the anatomical realism, the depiction of a pathology is discussed and beyond the visualisation of a historic concept of brain function.

Methods for visualising active microbial benzene degraders in in situ microcosms.

PubMed

Schurig, Christian; Mueller, Carsten W; Höschen, Carmen; Prager, Andrea; Kothe, Erika; Beck, Henrike; Miltner, Anja; Kästner, Matthias

2015-01-01

Natural attenuation maybe a cost-efficient option for bioremediation of contaminated sites but requires knowledge about the activity of degrading microbes under in situ conditions. In order to link microbial activity to the spatial distribution of contaminant degraders, we combined the recently improved in situ microcosm approach, so-called 'direct-push bacterial trap' (DP-BACTRAP), with nano-scale secondary ion mass spectrometry (NanoSIMS) analysis on samples from contaminated constructed wetlands. This approach is based on initially sterile microcosms amended with (13)C-labelled benzene as a source of carbon and energy for microorganisms. The microcosms were introduced directly in the constructed wetland, where they were colonised by indigenous microorganisms from the sediment. After incubation in the field, the samples were analysed by NanoSIMS, scanning electron microscopy (SEM) and fluorescence microscopy in order to visualise (13)C-labelled microbial biomass on undisturbed samples from the microcosms. With the approach developed, we successfully visualised benzene-degrading microbes on solid materials with high surface area by means of NanoSIMS. Moreover, we could demonstrate the feasibility of NanoSIMS analysis of unembedded porous media with a highly complex topography, which was frequently reasoned to not lead to sufficient results.

Real time magnetic resonance guided endomyocardial local delivery

PubMed Central

Corti, R; Badimon, J; Mizsei, G; Macaluso, F; Lee, M; Licato, P; Viles-Gonzalez, J F; Fuster, V; Sherman, W

2005-01-01

Objective: To investigate the feasibility of targeting various areas of left ventricle myocardium under real time magnetic resonance (MR) imaging with a customised injection catheter equipped with a miniaturised coil. Design: A needle injection catheter with a mounted resonant solenoid circuit (coil) at its tip was designed and constructed. A 1.5 T MR scanner with customised real time sequence combined with in-room scan running capabilities was used. With this system, various myocardial areas within the left ventricle were targeted and injected with a gadolinium-diethylenetriaminepentaacetic acid (DTPA) and Indian ink mixture. Results: Real time sequencing at 10 frames/s allowed clear visualisation of the moving catheter and its transit through the aorta into the ventricle, as well as targeting of all ventricle wall segments without further image enhancement techniques. All injections were visualised by real time MR imaging and verified by gross pathology. Conclusion: The tracking device allowed real time in vivo visualisation of catheters in the aorta and left ventricle as well as precise targeting of myocardial areas. The use of this real time catheter tracking may enable precise and adequate delivery of agents for tissue regeneration. PMID:15710717

Meteor Observational Data Visualisation in the Equatorial Coordinate System Using Information Technology

NASA Astrophysics Data System (ADS)

Golovashchenko, V. A.; Kolomiyets, S. V.

As a result of dynamic evolution of IT industry and astronomical research in the XXI century, which have resulted in obtaining large and complex data sets known as Big Data (e.g. data from the European Space Agency missions, such as GAIA mission, etc.), as well as due to rapid development of computer technologies, astronomy and computer science have become closely linked to each other. In the XXI century, Information technology has become an essential part of understanding the world around. This paper presents a solution to the problem of meteor data representation in the second equatorial coordinate (RA-Dec) system using Information Technology. Such a visualisation solution is needed to analyse the results of experiments based on the radar observations conducted in 1972-1978 (stage 1 - the data obtained in 1972 comprise 10,247 meteor orbits), which have been accumulated and stored in the Meteor Database of the Kharkiv National University of Radio Electronics (KNURE). A sample set of data with their characteristics and details about their delivery has been presented by (Kashcheyev & Tkachuk, 1980). An electronic calculator application was developed by employing the model of data visualisation in the form of celestial hemispheres using the object-oriented programming language C#.

Big Bicycle Data Processing: from Personal Data to Urban Applications

NASA Astrophysics Data System (ADS)

Pettit, C. J.; Lieske, S. N.; Leao, S. Z.

2016-06-01

Understanding the flows of people moving through the built environment is a vital source of information for the planners and policy makers who shape our cities. Smart phone applications enable people to trace themselves through the city and these data can potentially be then aggregated and visualised to show hot spots and trajectories of macro urban movement. In this paper our aim is to develop procedures for cleaning, aggregating and visualising human movement data and translating this into policy relevant information. In conducting this research we explore using bicycle data collected from a smart phone application known as RiderLog. We focus on the RiderLog application initially in the context of Sydney, Australia and discuss the procedures and challenges in processing and cleaning this data before any analysis can be made. We then present some preliminary map results using the CartoDB online mapping platform where data are aggregated and visualised to show hot spots and trajectories of macro urban movement. We conclude the paper by highlighting some of the key challenges in working with such data and outline some next steps in processing the data and conducting higher volume and more extensive analysis.

Performance of 1,2-indanedione and the need for sequential treatment of fingerprints.

PubMed

Mangle, Milery Figuera; Xu, Xioama; de Puit, M

2015-09-01

The use of 1,2-indanedione-ZnCl2 (IND-Zn) for the visualisation of fingermarks on porous materials has been widely accepted. The use of the reagent in comparison with others has been well described. To what extent IND or IND-Zn reacts with amino acids, in comparison to ninhydrin, has not been described to date. In this technical note we describe the analysis of amino acids with LCMS with the purpose of understanding the reactivity of ninhydrin, IND-Zn and the sequence thereof. The consumption of amino acids by these visualisation reagents is a feature we propose to use for calculations on the reactivity of these reagents. By using recently developed methods for the quantification of amino acids, we determined the consumption of these entities by visualisation reagents. We show that the differences in reactivity between IND and ninhydrin are not as big as the differences between 1,8-diazafluoren-9-one (DFO) and ninhydrin. We also show that it is of great importance to use IND-Zn and ninhydrin in sequence, in order to fully consume the amino acids present in fingermarks. Copyright © 2015 The Chartered Society of Forensic Sciences. Published by Elsevier Ireland Ltd. All rights reserved.

Conservation and restoration of natural building stones monitored through non-destructive X-ray computed tomography

NASA Astrophysics Data System (ADS)

Jacobs, P. Js; Cnudde, V.

2003-04-01

X-ray computed micro-tomography (μCT) is a promising non-destructive imaging technique to study building materials. μCT analysis provides information on the internal structure and petrophysical properties of small samples (size up to 2 cm diameter and 6 cm height), with to date a maximum resolution of 10 μm for commercial systems (Skyscan 1072). μCT allows visualising and measuring complete three-dimensional object structures without sample preparation. Possible applications of the μCT-technique for the monitoring of natural building stones are multiple: (i) to determine non-destructively porosity based on 3D images, (ii) to visualise weathering phenomena at the μ-scale, (iii) to understand the rationale of weathering processes, (iv) to visualise the presence of waterrepellents and consolidation products, (v) to monitor the protective effects of these products during weathering in order to understand the underlying weathering mechanisms and (vi) to provide advise on the suitability of products for the treatment of a particular rock-type. μCT-technique in combination with micro-Raman spectroscopy could prove to be a powerful tool for the future, as the combination of 3D visualisation and 2D chemical determination of inorganic as well as organic components could provide new insights to optimise conservation and restoration techniques of building materials. Determining the penetration depth of restoration products, used to consolidate or to protect natural building stones from weathering, is crucial if the application of conservation products is planned. Every type of natural building stone has its own petrophysical characteristics and each rock type reacts differently on the various restoration products available on the market. To assess the penetration depth and the effectiveness of a certain restoration product, μCT technology in combination with micro-Raman spectroscopy could be applied. Due to its non-destructive character and its resolution down to porosity scale, the technology of μCT offers a large potential of application. μCT-technique in combination with micro-Raman spectroscopy could prove to be a powerful tool for the future, as the combination of 3D visualisation and 2D chemical determination could provide new insights to optimise conservation and restoration techniques of building materials. These principles will be demonstrated for Maastricht limestone and Bray sandstone that have been selected for this study because of their high porosity and their very pure composition.

Automatically visualise and analyse data on pathways using PathVisioRPC from any programming environment.

PubMed

Bohler, Anwesha; Eijssen, Lars M T; van Iersel, Martijn P; Leemans, Christ; Willighagen, Egon L; Kutmon, Martina; Jaillard, Magali; Evelo, Chris T

2015-08-23

Biological pathways are descriptive diagrams of biological processes widely used for functional analysis of differentially expressed genes or proteins. Primary data analysis, such as quality control, normalisation, and statistical analysis, is often performed in scripting languages like R, Perl, and Python. Subsequent pathway analysis is usually performed using dedicated external applications. Workflows involving manual use of multiple environments are time consuming and error prone. Therefore, tools are needed that enable pathway analysis directly within the same scripting languages used for primary data analyses. Existing tools have limited capability in terms of available pathway content, pathway editing and visualisation options, and export file formats. Consequently, making the full-fledged pathway analysis tool PathVisio available from various scripting languages will benefit researchers. We developed PathVisioRPC, an XMLRPC interface for the pathway analysis software PathVisio. PathVisioRPC enables creating and editing biological pathways, visualising data on pathways, performing pathway statistics, and exporting results in several image formats in multiple programming environments. We demonstrate PathVisioRPC functionalities using examples in Python. Subsequently, we analyse a publicly available NCBI GEO gene expression dataset studying tumour bearing mice treated with cyclophosphamide in R. The R scripts demonstrate how calls to existing R packages for data processing and calls to PathVisioRPC can directly work together. To further support R users, we have created RPathVisio simplifying the use of PathVisioRPC in this environment. We have also created a pathway module for the microarray data analysis portal ArrayAnalysis.org that calls the PathVisioRPC interface to perform pathway analysis. This module allows users to use PathVisio functionality online without having to download and install the software and exemplifies how the PathVisioRPC interface can be used by data analysis pipelines for functional analysis of processed genomics data. PathVisioRPC enables data visualisation and pathway analysis directly from within various analytical environments used for preliminary analyses. It supports the use of existing pathways from WikiPathways or pathways created using the RPC itself. It also enables automation of tasks performed using PathVisio, making it useful to PathVisio users performing repeated visualisation and analysis tasks. PathVisioRPC is freely available for academic and commercial use at http://projects.bigcat.unimaas.nl/pathvisiorpc.

Accessing eSDO Solar Image Processing and Visualization through AstroGrid

NASA Astrophysics Data System (ADS)

Auden, E.; Dalla, S.

2008-08-01

The eSDO project is funded by the UK's Science and Technology Facilities Council (STFC) to integrate Solar Dynamics Observatory (SDO) data, algorithms, and visualization tools with the UK's Virtual Observatory project, AstroGrid. In preparation for the SDO launch in January 2009, the eSDO team has developed nine algorithms covering coronal behaviour, feature recognition, and global / local helioseismology. Each of these algorithms has been deployed as an AstroGrid Common Execution Architecture (CEA) application so that they can be included in complex VO workflows. In addition, the PLASTIC-enabled eSDO "Streaming Tool" online movie application allows users to search multi-instrument solar archives through AstroGrid web services and visualise the image data through galleries, an interactive movie viewing applet, and QuickTime movies generated on-the-fly.

Towards the Enhancement of "MINOR" Archaeological Heritage

NASA Astrophysics Data System (ADS)

Morandi, S.; Tremari, M.; Mandelli, A.

2017-02-01

The research is an analysis of the recording, reconstruction and visualisation of the 3D data of a XVIII century watermill, identified in an emergency archaeological excavation during the construction of the mini-hydroelectric plant on the bank of the Adda river in the municipality of Pizzighettone (Cremona, Lombardy, Italy). The work examines the use and the potentials of modern digital 3D modelling techniques applied to archaeological heritage aimed to increase the research, maintenance and presentation with interactive products. The use of three-dimensional models managed through AR (Augmented Reality) and VR (Virtual Reality) technologies with mobile devices gives several opportunities in the field of study and communication. It also improves on-site exploration of the landscape, enhancing the "minor" archaeological sites, daily subjected to numerous emergency works and facilitating the understanding of heritage sites.

Designing a mobile augmented reality tool for the locative visualisation of biomedical knowledge.

PubMed

Kilby, Jess; Gray, Kathleen; Elliott, Kristine; Waycott, Jenny; Sanchez, Fernando Martin; Dave, Bharat

2013-01-01

Mobile augmented reality (MAR) may offer new and engaging ways to support consumer participation in health. We report on design-based research into a MAR application for smartphones and tablets, intended to improve public engagement with biomedical research in a specific urban precinct. Following a review of technical capabilities and organizational and locative design considerations, we worked with staff of four research institutes to elicit their ideas about information and interaction functionalities of a shared MAR app. The results were promising, supporting the development of a prototype and initial field testing with these staff. Evidence from this project may point the way toward user-centred design of MAR services that will enable more widespread adoption of the technology in other healthcare and biomedical research contexts.

Doped hydrophobic silica nano- and micro-particles as novel agents for developing latent fingerprints.

PubMed

Theaker, Brenden J; Hudson, Katherine E; Rowell, Frederick J

2008-01-15

Novel hydrophobic silica based particles have been developed to visualise latent fingerprints. The composition of the particles has been designed to maximise both hydrophobic and ionic interactions between a variety of coloured and fluorescent reporter molecules and the silicate backbone within the particles. The resulting doped particles retain the incorporated dyes with high affinity. In addition, a variety of sub-particles have also been embedded to again produce coloured or magnetisable hydrophobic particles. The particles can be harvested as nanoparticles or microparticles. The former are applied to latent fingerprints as an aqueous suspension and the latter as a dusting agent using brushes or a magnetic wand. Examples of the prints produced using these agents are given. The resulting prints have good definition.

Integrating GPCR-specific information with full text articles

PubMed Central

2011-01-01

Background With the continued growth in the volume both of experimental G protein-coupled receptor (GPCR) data and of the related peer-reviewed literature, the ability of GPCR researchers to keep up-to-date is becoming increasingly curtailed. Results We present work that integrates the biological data and annotations in the GPCR information system (GPCRDB) with next-generation methods for intelligently exploring, visualising and interacting with the scientific articles used to disseminate them. This solution automatically retrieves relevant information from GPCRDB and displays it both within and as an adjunct to an article. Conclusions This approach allows researchers to extract more knowledge more swiftly from literature. Importantly, it allows reinterpretation of data in articles published before GPCR structure data became widely available, thereby rescuing these valuable data from long-dormant sources. PMID:21910883

Interactive Information Seeking and Retrieving: A Third Feedback Framework.

ERIC Educational Resources Information Center

Spink, Amanda

1996-01-01

Presents an overview of feedback within the cybernetics and social frameworks. These feedback concepts are then compared with the interactive feedback concept evolving within the framework of information seeking and retrieving, based on their conceptualization of the feedback loop and notion of information. (Author/AEF)

Joint Interactions in Large Online Knowledge Communities: The A[subscript 3]C Framework

ERIC Educational Resources Information Center

Jeong, Heisawn; Cress, Ulrike; Moskaliuk, Johannes; Kimmerle, Joachim

2017-01-01

Social interaction is crucial for understanding individual and collective processes in knowledge communities. We describe how technology has changed the way people interact in large communities. Building on this description, we propose a framework that distinguishes four types of joint interactions in online knowledge communities: Attendance,…

Relationship between the cohesion of guest particles on the flow behaviour of interactive mixtures.

PubMed

Mangal, Sharad; Gengenbach, Thomas; Millington-Smith, Doug; Armstrong, Brian; Morton, David A V; Larson, Ian

2016-05-01

In this study, we aimed to investigate the effects cohesion of small surface-engineered guest binder particles on the flow behaviour of interactive mixtures. Polyvinylpyrrolidone (PVP) - a model pharmaceutical binder - was spray-dried with varying l-leucine feed concentrations to create small surface-engineered binder particles with varying cohesion. These spray-dried formulations were characterised by their particle size distribution, morphology and cohesion. Interactive mixtures were produced by blending these spray-dried formulations with paracetamol. The resultant blends were visualised under scanning electron microscope to confirm formation of interactive mixtures. Surface coverage of paracetamol by guest particles as well as the flow behaviour of these mixtures were examined. The flow performance of interactive mixtures was evaluated using measurements of conditioned bulk density, basic flowability energy, aeration energy and compressibility. With higher feed l-leucine concentrations, the surface roughness of small binder particles increased, while their cohesion decreased. Visual inspection of the SEM images of the blends indicated that the guest particles adhered to the surface of paracetamol resulting in effective formation of interactive mixtures. These images also showed that the low-cohesion guest particles were better de-agglomerated that consequently formed a more homogeneous interactive mixture with paracetamol compared with high-cohesion formulations. The flow performance of interactive mixtures changed as a function of the cohesion of the guest particles. Interactive mixtures with low-cohesion guest binder particles showed notably improved bulk flow performance compared with those containing high-cohesion guest binder particles. Thus, our study suggests that the cohesion of guest particles dictates the flow performance of interactive mixtures. Crown Copyright © 2016. Published by Elsevier B.V. All rights reserved.

What is health systems responsiveness? Review of existing knowledge and proposed conceptual framework.

PubMed

Mirzoev, Tolib; Kane, Sumit

2017-01-01

Responsiveness is a key objective of national health systems. Responsive health systems anticipate and adapt to existing and future health needs, thus contributing to better health outcomes. Of all the health systems objectives, responsiveness is the least studied, which perhaps reflects lack of comprehensive frameworks that go beyond the normative characteristics of responsive services. This paper contributes to a growing, yet limited, knowledge on this topic. Herewith, we review the current frameworks for understanding health systems responsiveness and drawing on these, as well as key frameworks from the wider public services literature, propose a comprehensive conceptual framework for health systems responsiveness. This paper should be of interest to different stakeholders who are engaged in analysing and improving health systems responsiveness. Our review shows that existing knowledge on health systems responsiveness can be extended along the three areas. First, responsiveness entails an actual experience of people's interaction with their health system, which confirms or disconfirms their initial expectations of the system. Second, the experience of interaction is shaped by both the people and the health systems sides of this interaction. Third, different influences shape people's interaction with their health system, ultimately affecting their resultant experiences. Therefore, recognition of both people and health systems sides of interaction and their key determinants would enhance the conceptualisations of responsiveness. Our proposed framework builds on, and advances, the core frameworks in the health systems literature. It positions the experience of interaction between people and health system as the centrepiece and recognises the determinants of responsiveness experience both from the health systems (eg, actors, processes) and the people (eg, initial expectations) sides. While we hope to trigger further thinking on the conceptualisation of health system responsiveness, the proposed framework can guide assessments of, and interventions to strengthen, health systems responsiveness.

What is health systems responsiveness? Review of existing knowledge and proposed conceptual framework

PubMed Central

Mirzoev, Tolib; Kane, Sumit

2017-01-01

Responsiveness is a key objective of national health systems. Responsive health systems anticipate and adapt to existing and future health needs, thus contributing to better health outcomes. Of all the health systems objectives, responsiveness is the least studied, which perhaps reflects lack of comprehensive frameworks that go beyond the normative characteristics of responsive services. This paper contributes to a growing, yet limited, knowledge on this topic. Herewith, we review the current frameworks for understanding health systems responsiveness and drawing on these, as well as key frameworks from the wider public services literature, propose a comprehensive conceptual framework for health systems responsiveness. This paper should be of interest to different stakeholders who are engaged in analysing and improving health systems responsiveness. Our review shows that existing knowledge on health systems responsiveness can be extended along the three areas. First, responsiveness entails an actual experience of people’s interaction with their health system, which confirms or disconfirms their initial expectations of the system. Second, the experience of interaction is shaped by both the people and the health systems sides of this interaction. Third, different influences shape people’s interaction with their health system, ultimately affecting their resultant experiences. Therefore, recognition of both people and health systems sides of interaction and their key determinants would enhance the conceptualisations of responsiveness. Our proposed framework builds on, and advances, the core frameworks in the health systems literature. It positions the experience of interaction between people and health system as the centrepiece and recognises the determinants of responsiveness experience both from the health systems (eg, actors, processes) and the people (eg, initial expectations) sides. While we hope to trigger further thinking on the conceptualisation of health system responsiveness, the proposed framework can guide assessments of, and interventions to strengthen, health systems responsiveness. PMID:29225953

A Video Game-Based Framework for Analyzing Human-Robot Interaction: Characterizing Interface Design in Real-Time Interactive Multimedia Applications

DTIC Science & Technology

2006-01-01

segments video game interaction into domain-independent components which together form a framework that can be used to characterize real-time interactive...multimedia applications in general and HRI in particular. We provide examples of using the components in both the video game and the Unmanned Aerial

Teaching Plate Tectonic Concepts using GeoMapApp Learning Activities

NASA Astrophysics Data System (ADS)

Goodwillie, A. M.; Kluge, S.

2012-12-01

GeoMapApp Learning Activities ( http://serc.carleton.edu/geomapapp/collection.html ) can help educators to expose undergraduate students to a range of earth science concepts using high-quality data sets in an easy-to-use map-based interface called GeoMapApp. GeoMapApp Learning Activities require students to interact with and analyse research-quality geoscience data as a means to explore and enhance their understanding of underlying content and concepts. Each activity is freely available through the SERC-Carleton web site and offers step-by-step student instructions and answer sheets. Also provided are annotated educator versions of the worksheets that include teaching tips, additional content and suggestions for further work. The activities can be used "off-the-shelf". Or, since the educator may require flexibility to tailor the activities, the documents are provided in Word format for easy modification. Examples of activities include one on the concept of seafloor spreading that requires students to analyse global seafloor crustal age data to calculate spreading rates in different ocean basins. Another activity has students explore hot spots using radiometric age dating of rocks along the Hawaiian-Emperor seamount chain. A third focusses upon the interactive use of contours and profiles to help students visualise 3-D topography on 2-D computer screens. A fourth activity provides a study of mass wasting as revealed through geomorphological evidence. The step-by-step instructions and guided inquiry approach reduce the need for teacher intervention whilst boosting the time that students can spend on productive exploration and learning. The activities can be used, for example, in a classroom lab with the educator present and as self-paced assignments in an out-of-class setting. GeoMapApp Learning Activities are funded through the NSF GeoEd program and are aimed at students in the introductory undergraduate, community college and high school levels. The activities are based upon GeoMapApp (http://www.geomapapp.org), a free map-based data exploration and visualisation tool that allows students to access a wide range of geoscience data in a virtual lab-like environment.

Scotland's Water Map: Understanding water sector links to support decision making for the Hydro Nation Agenda

NASA Astrophysics Data System (ADS)

Falconer, Ruth E.; Gilmour, Daniel; Duffy, Alison; Isaacs, John; Stojanovic, Vladeta; O'Keeffe, Juliette; Blackwood, David

2015-04-01

The value of Scotland's water and sewerage market is projected to grow to £1.24bn by 2016/17. Developing future opportunities must take place alongside maintaining current service provision; however the demand on water and waste water services is constantly evolving. An integrated approach to water management requires an understanding of complex interactions that exist between key actors in the sector to allow water management strategies to exploit inter-sectorial links. Successful integrated analysis of the water sector in Scotland will support management activities key to responding to the Hydro Nation themes of 1) Governance and international development 2) Environmental protection 3) Economic opportunities 4) Research development. In order to deliver on these objectives an approach is required to capture and communicate the scope and scale of the water sector and its interconnectedness. The methodology required to determine scope, scale and interconnectedness of water sector involved the identification and application of an appropriate range of techniques from the Information and Knowledge Management disciplines combined with the Information Visualisation field. Scope and scale of the water sector was identified by a desk based study and this data was visualized using a geographic map. Sector interconnectedness was determined by interviewing key actors. The interviews identified the stakeholders associated with information flows, and the purpose of the information transfer through Reporting/Managing (R/M), Influence and Information sharing (I) or Control (C) activities. Primary information flows were also scored with respect to importance against the 4 key Hydro Nation agenda themes. Many organisations were identified who interact within Scotland's water sector including the Scottish Government and Ministers, the Regulators (WICS, DWQR, SEPA), Scottish Water (core and non-core functions), plus many other stakeholders ranging from research institutions to private sector businesses. This data was used in a water wheel visualisation where connections between stakeholders are shown as links and the width of the link represents the importance of the information exchage. Both maps will be used by the Scottish Government and its stakeholders to support decision making and illustrate the management and control aspects of the water sector.

The development and application of landscape evolution models to coupled coast-estuarine environments

NASA Astrophysics Data System (ADS)

Morris, Chloe; Coulthard, Tom; Parsons, Daniel R.; Manson, Susan; Barkwith, Andrew

2017-04-01

Landscape Evolution Models (LEMs) are proven to be useful tools in understanding the morphodynamics of coast and estuarine systems. However, perhaps owing to the lack of research in this area, current models are not capable of simulating the dynamic interactions between these systems and their co-evolution at the meso-scale. Through a novel coupling of numerical models, this research is designed to explore coupled coastal-estuarine interactions, controls on system behaviour and the influence that environmental change could have. This will contribute to the understanding of the morphodynamics of these systems and how they may behave and evolve over the next century in response to climate changes, with the aim of informing management practices. This goal is being achieved through the modification and coupling of the one-line Coastline Evolution Model (CEM) with the hydrodynamic LEM CAESAR-Lisflood (C-L). The major issues faced with coupling these programs are their differing complexities and the limited graphical visualisations produced by the CEM that hinder the dissemination of results. The work towards overcoming these issues and reported here, include a new version of the CEM that incorporates a range of more complex geomorphological processes and boasts a graphical user interface that guides users through model set-up and projects a live output during model runs. The improved version is a stand-alone tool that can be used for further research projects and for teaching purposes. A sensitivity analysis using the Morris method has been completed to identify which key variables, including wave climate, erosion and weathering values, dominate the control of model behaviour. The model is being applied and tested using the evolution of the Holderness Coast, Humber Estuary and Spurn Point on the east coast of England (UK), which possess diverse geomorphologies and complex, co-evolving sediment pathways. Simulations using the modified CEM are currently being completed to ascertain the processes influential to the morphodynamics and evolution of these systems; presently this includes increasing sea levels and changing wave climate patterns. Outputs and findings from these runs will be presented and discussed, with the aid of the improved graphical visualisations and animations that illustrate the evolution of simulated environments.

Airborne electromagnetics data interactive visualisation and exploratory data analysis using Cloud technologies

NASA Astrophysics Data System (ADS)

Golodoniuc, P.; Davis, A. C.; Klump, J. F.

2017-12-01

Electromagnetic exploration techniques are extensively used for remote detection and measurement of subsurface electrical conductivity structures for a variety of geophysical applications such as mineral exploration and groundwater detection. The Electromagnetic Applications group in the Mineral Resources business unit of CSIRO heavily relies upon the use of airborne electromagnetic (AEM) data for the development of new exploration methods. AEM data, which are often originally acquired for green- or brown-fields exploration for minerals, can be re-used for groundwater resource detection in the near-surface. This makes AEM data potentially useful beyond their initial purpose for decades into the future. Increasingly, AEM data are also used as a primary mapping tool for groundwater resources. With surveys ranging from under 1000 km to tens of thousands of km in total length, AEM data are spatially and temporally dense. Sounding stations are often sampled every 0.2 seconds, with about 30-50 measurements taken at each site, resulting in a spacing of measurements along the flight lines of approximately 20­-50 metres. This means that typical AEM surveys can easily have on the order of millions of individual stations, with tens of millions of measurements. AEM data needs to be examined for data quality before it can be inverted into conductivity-depth information. Data, which is gathered in survey transects or lines, is examined both along the line, in a plan view and for the transient decay of the electromagnetic signal of individual stations before noise artefacts can be removed. The complexity of the data, its size and dimensionality require efficient tools that support interactive visual data analysis and allows easy navigation through the dataset. A suite of numerical algorithms for data quality assurance facilitates this process through efficient visualisations and data quality metrics. The extensible architecture of the toolkit allows application of custom algorithms on-demand through a web-based user interface and seamlessly connects data processing workflow to geophysical inversion codes. The toolkit architecture has a small client-side footprint and runs on a standard workstation, delegating all computationally intensive tasks to the accompanying Cloud-based processing unit.

[One decade of functional imaging in schizophrenia research. From visualisation of basic information processing steps to molecular-genetic oriented imaging].

PubMed

Tost, H; Meyer-Lindenberg, A; Ruf, M; Demirakça, T; Grimm, O; Henn, F A; Ende, G

2005-02-01

Modern neuroimaging techniques such as magnetic resonance imaging (MRI) and positron emission tomography (PET) have contributed tremendously to our current understanding of psychiatric disorders in the context of functional, biochemical and microstructural alterations of the brain. Since the mid-nineties, functional MRI has provided major insights into the neurobiological correlates of signs and symptoms in schizophrenia. The current paper reviews important fMRI studies of the past decade in the domains of motor, visual, auditory, attentional and working memory function. Special emphasis is given to new methodological approaches, such as the visualisation of medication effects and the functional characterisation of risk genes.

Antigen retrieval, blocking, detection and visualisation systems in immunohistochemistry: a review and practical evaluation of tyramide and rolling circle amplification systems.

PubMed

Warford, Anthony; Akbar, Hameed; Riberio, Deise

2014-11-01

To achieve specificity and sensitivity using immunohistochemistry it is necessary to combine the application of validated primary antibodies with optimised pre-treatment, detection and visualisation steps. The influence of these surrounding procedures is reviewed. A practical evaluation of tyramide signal amplification and rolling circle amplification detection methods is provided in which formalin fixed paraffin embedded sections of adenocarcinomas of breast, colon and lung together with squamous metaplasia of lung were immunostained with CD20 and CK19 primary antibodies. The results indicate that the detection systems are of comparable sensitivity and specificity. Copyright © 2014 Elsevier Inc. All rights reserved.

Multiple object, three-dimensional motion tracking using the Xbox Kinect sensor

NASA Astrophysics Data System (ADS)

Rosi, T.; Onorato, P.; Oss, S.

2017-11-01

In this article we discuss the capability of the Xbox Kinect sensor to acquire three-dimensional motion data of multiple objects. Two experiments regarding fundamental features of Newtonian mechanics are performed to test the tracking abilities of our setup. Particular attention is paid to check and visualise the conservation of linear momentum, angular momentum and energy. In both experiments, two objects are tracked while falling in the gravitational field. The obtained data is visualised in a 3D virtual environment to help students understand the physics behind the performed experiments. The proposed experiments were analysed with a group of university students who are aspirant physics and mathematics teachers. Their comments are presented in this paper.

Nuclear cartography: patterns in binding energies and subatomic structure

NASA Astrophysics Data System (ADS)

Simpson, E. C.; Shelley, M.

2017-11-01

Nuclear masses and binding energies are some of the first nuclear properties met in high school physics, and can be used to introduce radioactive decays, fusion, and fission. With relatively little extension, they can also illustrate fundamental concepts in nuclear physics, such as shell structure and pairing, and to discuss how the elements around us were formed in stars. One way of visualising these nuclear properties is through the nuclide chart, which maps all nuclides as a function of their proton and neutron numbers. Here we use the nuclide chart to illustrate various aspects of nuclear physics, and present 3D visualisations of it produced as part of the binding blocks project.

Visualising Astronomy: Using Impact to Inform

NASA Astrophysics Data System (ADS)

Wyatt, R.

2013-04-01

Pop culture has visualised asteroids in a way that has made a far greater impact in the public domain than the outreach community can ever hope to achieve. Films such as Meteor (1979), Armageddon (1997) and Deep Impact (1997) may score poorly on scientific accuracy, but they have influenced our collective consciousness. (Perhaps in a fit of pre-millennial anxiety, the late 1990s saw a host of films featuring an asteroid or comet on a collision course with Earth1.) In addition to the destruction of Earth's cities, the Millennium Falcon dodging giant tumbling boulders in The Empire Strikes Back has probably influenced more people's mental image of an asteroid belt than any other single visual.

Quantum dot-fluorescence in situ hybridisation for Ectromelia virus detection based on biotin-streptavidin interactions.

PubMed

Wang, Ting; Zheng, Zhenhua; Zhang, Xian-En; Wang, Hanzhong

2016-09-01

Ectromelia virus (ECTV) is an pathogen that can lead to a lethal, acute toxic disease known as mousepox in mice. Prevention and control of ECTV infection requires the establishment of a rapid and sensitive diagnostic system for detecting the virus. In the present study, we developed a method of quantum-dot-fluorescence based in situ hybridisation for detecting ECTV genome DNA. Using biotin-dUTP to replace dTTP, biotin was incorporated into a DNA probe during polymerase chain reaction. High sensitivity and specificity of ECTV DNA detection were displayed by fluorescent quantum dots based on biotin-streptavidin interactions. ECTV DNA was then detected by streptavidin-conjugated quantum dots that bound the biotin-labelled probe. Results indicated that the established method can visualise ECTV genomic DNA in both infected cells and mouse tissues. To our knowledge, this is the first study reporting quantum-dot-fluorescence based in situ hybridisation for the detection of viral nucleic acids, providing a reference for the identification and detection of other viruses. Copyright © 2016. Published by Elsevier B.V.

A high definition Mueller polarimetric endoscope for tissue characterisation (Conference Presentation)

NASA Astrophysics Data System (ADS)

Qi, Ji; Elson, Daniel

2016-03-01

The mechanism of most medical endoscopes is based on the interaction between light and biological tissue, inclusive of absorption, elastic scattering and fluorescence. In essence, the metrics of those interactions are obtained from the fundamental properties of light as an electro-magnetic waves, namely, the radiation intensity and wavelength. As another fundamental property of light, polarisation can not only reveal tissue scattering and absorption information from a different perspective, but is also able to provide a fresh insight into directional tissue birefringence properties induced by birefringent compositions and anisotropic fibrous structures, such as collagen, elastin, muscle fibre, etc at the same time. Here we demonstrate a low cost high definition Muller polarimetric endoscope with minimal alteration of a rigid endoscope. By imaging birefringent tissue mimicking phantoms and a porcine bladder, we show that this novel endoscopic imaging modality is able to provide different information of interest from unpolarised endoscopic imaging, including linear depolarization, circular depolarization, birefringence, optic axis orientation and dichroism. This endoscope can potentially be employed for better tissue visualisation and benefit endoscopic investigations and intra-operative guidance.

Visualising substrate-fingermark interactions: Solid-state NMR spectroscopy of amino acid reagent development on cellulose substrates.

PubMed

Spindler, Xanthe; Shimmon, Ronald; Roux, Claude; Lennard, Chris

2015-05-01

Most spectroscopic studies of the reaction products formed by ninhydrin, 1,2-indanedione-zinc (Ind-Zn) and 1,8-diazafluoren-9-one (DFO) when reacted with amino acids or latent fingermarks on paper substrates are focused on visible absorption or luminescence spectroscopy. In addition, structural elucidation studies are typically limited to solution-based mass spectrometry or liquid nuclear magnetic resonance (NMR) spectroscopy, which does not provide an accurate representation of the fingermark development process on common paper substrates. The research presented in this article demonstrates that solid-state carbon-13 magic angle spinning NMR ((13)C-MAS-NMR) is a technique that can not only be utilised for structural studies of fingermark enhancement reagents, but is a promising technique for characterising the effect of paper chemistry on fingermark deposition and enhancement. The latter opens up a research area that has been under-explored to date but has the potential to improve our understanding of how fingermark secretions and enhancement reagents interact with paper substrates. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Integration of Geo-Sensor Feeds and Event Consumer Services for Real-Time Representation of Iot Nodes

NASA Astrophysics Data System (ADS)

Isikdag, U.; Pilouk, M.

2016-06-01

More and more devices are starting to be connected to the Internet every day. Internet-of-Things (IoT) is known as an architecture where online devices have the ability to communicate and interact with each other in real-time. On the other hand, with the development of IoT related technologies information about devices (i.e. Things) can be acquired in real-time by the humans. The implementation of IoT related technologies requires new approaches to be investigated for novel system architectures. These architectures need to have 3 main abilities. The first one is the ability is to store and query information coming from millions of devices in real-time. The second one is the ability to interact with large number of devices seamlessly regardless of their hardware and their software platforms. The final one is the ability to visualise and present information coming from millions of sensors in real time. The paper provides an architectural approach and implementation tests for storage, exposition and presentation of large amounts of real-time geo-information coming from multiple IoT nodes (and sensors).

Erwinia amylovora affects the phenylpropanoid-flavonoid pathway in mature leaves of Pyrus communis cv. Conférence.

PubMed

Vrancken, K; Holtappels, M; Schoofs, H; Deckers, T; Treutter, D; Valcke, R

2013-11-01

Flavonoids, which are synthesized by the phenylpropanoid-flavonoid pathway, not only contribute to fruit colour and photoprotection, they also may provide antimicrobial and structural components during interaction with micro-organisms. A possible response of this pathway was assessed in both mature and immature leaves of shoots of 2-year-old pear trees cv. Conférence, which were inoculated with the gram-negative bacterium Erwinia amylovora strain SGB 225/12, were mock-inoculated or were left untreated. The phenylpropanoid-flavonoid pathway was analysed by histological studies, by gene expression using RT-qPCR and by HPLC analyses of the metabolites at different time intervals after infection. Transcription patterns of two key genes anthocyanidin reductase (ANR) and chalcone synthase (CHS) related to the phenylpropanoid-flavonoid pathway showed differences between control, mock-inoculated and E. amylovora-inoculated mature leaves, with the strongest reaction 48 h after inoculation. The impact of E. amylovora was also visualised in histological sections, and confirmed by HPLC, as epicatechin -which is produced via ANR- augmented 72 h after inoculation in infected leaf tissue. Besides the effect of treatments, ontogenesis-related differences were found as well. The increase of certain key genes, the rise in epicatechin and the visualisation in several histological sections in this study suggest a non-negligible impact on the phenylpropanoid-flavonoid pathway in Pyrus communis due to inoculation with E. amylovora. In this study, we propose a potential role of this pathway in defence mechanisms, providing a detailed analysis of the response of this system attributable to inoculation with E. amylovora. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

Development of a browser application to foster research on linking climate and health datasets: Challenges and opportunities.

PubMed

Hajat, Shakoor; Whitmore, Ceri; Sarran, Christophe; Haines, Andy; Golding, Brian; Gordon-Brown, Harriet; Kessel, Anthony; Fleming, Lora E

2017-01-01

Improved data linkages between diverse environment and health datasets have the potential to provide new insights into the health impacts of environmental exposures, including complex climate change processes. Initiatives that link and explore big data in the environment and health arenas are now being established. To encourage advances in this nascent field, this article documents the development of a web browser application to facilitate such future research, the challenges encountered to date, and how they were addressed. A 'storyboard approach' was used to aid the initial design and development of the application. The application followed a 3-tier architecture: a spatial database server for storing and querying data, server-side code for processing and running models, and client-side browser code for user interaction and for displaying data and results. The browser was validated by reproducing previously published results from a regression analysis of time-series datasets of daily mortality, air pollution and temperature in London. Data visualisation and analysis options of the application are presented. The main factors that shaped the development of the browser were: accessibility, open-source software, flexibility, efficiency, user-friendliness, licensing restrictions and data confidentiality, visualisation limitations, cost-effectiveness, and sustainability. Creating dedicated data and analysis resources, such as the one described here, will become an increasingly vital step in improving understanding of the complex interconnections between the environment and human health and wellbeing, whilst still ensuring appropriate confidentiality safeguards. The issues raised in this paper can inform the future development of similar tools by other researchers working in this field. Copyright © 2016 Elsevier B.V. All rights reserved.

A Framework to Describe, Analyze and Generate Interactive Motor Behaviors

PubMed Central

Jarrassé, Nathanaël; Charalambous, Themistoklis; Burdet, Etienne

2012-01-01

While motor interaction between a robot and a human, or between humans, has important implications for society as well as promising applications, little research has been devoted to its investigation. In particular, it is important to understand the different ways two agents can interact and generate suitable interactive behaviors. Towards this end, this paper introduces a framework for the description and implementation of interactive behaviors of two agents performing a joint motor task. A taxonomy of interactive behaviors is introduced, which can classify tasks and cost functions that represent the way each agent interacts. The role of an agent interacting during a motor task can be directly explained from the cost function this agent is minimizing and the task constraints. The novel framework is used to interpret and classify previous works on human-robot motor interaction. Its implementation power is demonstrated by simulating representative interactions of two humans. It also enables us to interpret and explain the role distribution and switching between roles when performing joint motor tasks. PMID:23226231

A framework to describe, analyze and generate interactive motor behaviors.

PubMed

Jarrassé, Nathanaël; Charalambous, Themistoklis; Burdet, Etienne

2012-01-01

While motor interaction between a robot and a human, or between humans, has important implications for society as well as promising applications, little research has been devoted to its investigation. In particular, it is important to understand the different ways two agents can interact and generate suitable interactive behaviors. Towards this end, this paper introduces a framework for the description and implementation of interactive behaviors of two agents performing a joint motor task. A taxonomy of interactive behaviors is introduced, which can classify tasks and cost functions that represent the way each agent interacts. The role of an agent interacting during a motor task can be directly explained from the cost function this agent is minimizing and the task constraints. The novel framework is used to interpret and classify previous works on human-robot motor interaction. Its implementation power is demonstrated by simulating representative interactions of two humans. It also enables us to interpret and explain the role distribution and switching between roles when performing joint motor tasks.

A further study to investigate the detection and enhancement of latent fingerprints using visible absorption and luminescence chemical imaging.

PubMed

Payne, Gemma; Reedy, Brian; Lennard, Chris; Comber, Bruce; Exline, David; Roux, Claude

2005-05-28

This study investigated the application of chemical imaging to the detection of latent fingerprints using the Condor macroscopic chemical imaging system (ChemImage Corp., Pittsburgh, USA). Methods were developed and optimised for the visualisation of untreated latent fingerprints and fingerprints processed with DFO, ninhydrin, cyanoacrylate, and cyanoacrylate plus rhodamine 6G stain. The results obtained with chemical imaging were compared to the detection achieved using conventional imaging techniques. The Condor significantly improved the detection of many prints, especially those that might be considered poor quality or borderline prints. Prints on newspaper treated with ninhydrin and DFO, and prints on white and yellow paper treated with ninhydrin, benefited the most from chemical imaging detection. In many cases, fingerprints undetectable using conventional imaging techniques could be visualised with chemical imaging. Ridge detail from untreated prints on yellow paper was also detected using the Condor. When prints of high quality were examined, both detection techniques produced quality results. The results of this project demonstrate that chemical imaging offers advantages over conventional visualisation techniques when examining latent fingerprints, especially those that would be considered difficult, such as weak prints or prints on surfaces that produce highly luminescent backgrounds. Standard testing procedures for the detection and enhancement of fingerprints by chemical imaging are presented and discussed.

The non-contact detection and identification of blood stained fingerprints using visible wavelength reflectance hyperspectral imaging: Part 1.

PubMed

Cadd, Samuel; Li, Bo; Beveridge, Peter; O'Hare, William T; Campbell, Andrew; Islam, Meez

2016-05-01

Blood is one of the most commonly encountered types of biological evidence found at scenes of violent crime and one of the most commonly observed fingerprint contaminants. Current visualisation methods rely on presumptive tests or chemical enhancement methods. Although these can successfully visualise ridge detail, they are destructive, do not confirm the presence of blood and can have a negative impact on DNA sampling. A novel application of visible wavelength reflectance hyperspectral imaging (HSI) has been used for the detection and positive identification of blood stained fingerprints in a non-contact and non-destructive manner on white ceramic tiles. The identification of blood was based on the unique visible absorption spectrum of haemoglobin between 400 and 500 nm. HSI has been used to successfully visualise ridge detail in blood stained fingerprints to the ninth depletion. Ridge detail was still detectable with diluted blood to 20-fold dilutions. Latent blood stains were detectable to 15,000-fold dilutions. Ridge detail was detectable for fingerprints up to 6 months old. HSI was also able to conclusively distinguish blood stained fingerprints from fingerprints in six paints and eleven other red/brown media with zero false positives. Copyright © 2016 The Chartered Society of Forensic Sciences. Published by Elsevier Ireland Ltd. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Jianguo; Hull, Vanessa; Batistella, Mateus

Interactions between distant places are increasingly widespread and influential, often leading to unexpected outcomes with profound implications for sustainability. Numerous sustainability studies have been conducted within a particular place with little attention to the impacts of distant interactions on sustainability in multiple places. Although distant forces have been studied, they are usually treated as exogenous variables and feedbacks have been rarely considered. To understand and integrate various distant interactions better, we propose an integrated framework based on telecoupling – an umbrella concept that refers to socioeconomic and environmental interactions over distances. The concept of telecoupling is a logical extension ofmore » research on coupled human and natural systems, in which human and natural systems interact within particular places. The telecoupling framework contains five major interrelated components (coupled human and natural systems, agents, flows, causes, and effects). We illustrate the framework using two examples of distant interactions, highlight the implications of the framework, and discuss research needs and approaches to move research on telecouplings forward. The framework can help better analyze system components and their interrelationships, identify research gaps, detect hidden costs and untapped benefits, provide a useful means to incorporate feedbacks as well as trade-offs and synergies across multiple places (sending, receiving, and spillover systems), and improve the understanding of distant interactions and the effectiveness of policies for socioeconomic and environmental sustainability from local to global levels.« less

Interpretation of Appearance: The Effect of Facial Features on First Impressions and Personality

PubMed Central

Wolffhechel, Karin; Fagertun, Jens; Jacobsen, Ulrik Plesner; Majewski, Wiktor; Hemmingsen, Astrid Sofie; Larsen, Catrine Lohmann; Lorentzen, Sofie Katrine; Jarmer, Hanne

2014-01-01

Appearance is known to influence social interactions, which in turn could potentially influence personality development. In this study we focus on discovering the relationship between self-reported personality traits, first impressions and facial characteristics. The results reveal that several personality traits can be read above chance from a face, and that facial features influence first impressions. Despite the former, our prediction model fails to reliably infer personality traits from either facial features or first impressions. First impressions, however, could be inferred more reliably from facial features. We have generated artificial, extreme faces visualising the characteristics having an effect on first impressions for several traits. Conclusively, we find a relationship between first impressions, some personality traits and facial features and consolidate that people on average assess a given face in a highly similar manner. PMID:25233221

Live Social Semantics

NASA Astrophysics Data System (ADS)

Alani, Harith; Szomszor, Martin; Cattuto, Ciro; van den Broeck, Wouter; Correndo, Gianluca; Barrat, Alain

Social interactions are one of the key factors to the success of conferences and similar community gatherings. This paper describes a novel application that integrates data from the semantic web, online social networks, and a real-world contact sensing platform. This application was successfully deployed at ESWC09, and actively used by 139 people. Personal profiles of the participants were automatically generated using several Web 2.0 systems and semantic academic data sources, and integrated in real-time with face-to-face contact networks derived from wearable sensors. Integration of all these heterogeneous data layers made it possible to offer various services to conference attendees to enhance their social experience such as visualisation of contact data, and a site to explore and connect with other participants. This paper describes the architecture of the application, the services we provided, and the results we achieved in this deployment.

Resistant-hemicelluloses toward successive chemical treatment during cellulose fibre extraction

NASA Astrophysics Data System (ADS)

Naqiya, F. M. Z.; Ahmad, I.; Airianah, O. B.

2018-04-01

Lignocellulosic materials have high demand bio-polymers industries as it is rich in cellulose but other residues that still remain in the extracted cellulose might influence the ability of cellulose-rich material to interact with other polymers. In this study, cellulose fibre was extracted from oil palm frond (OPF) using alkali and bleaching treatment. The morphological changes of each sample after every treatment was observed using Scanning Electron Microscope (SEM) and was further chemically extracted and quantitatively evaluated via spectrophotometric method. The non-cellulosic component was found predominantly contained hemicelluloses and these remaining hemicelluloses were hydrolysed and the monosaccharides of hemicelluloses were visualised by Thin Layer Chromatography (TLC). Xylose, arabinose, mannose and glucose were detected and therefore, it is suggested that the plausible type of resistant-hemicelluloses in OPF extracted fibre are arabinoxylan, glucomannan and/or glucan.

Interpretation of appearance: the effect of facial features on first impressions and personality.

PubMed

Wolffhechel, Karin; Fagertun, Jens; Jacobsen, Ulrik Plesner; Majewski, Wiktor; Hemmingsen, Astrid Sofie; Larsen, Catrine Lohmann; Lorentzen, Sofie Katrine; Jarmer, Hanne

2014-01-01

Appearance is known to influence social interactions, which in turn could potentially influence personality development. In this study we focus on discovering the relationship between self-reported personality traits, first impressions and facial characteristics. The results reveal that several personality traits can be read above chance from a face, and that facial features influence first impressions. Despite the former, our prediction model fails to reliably infer personality traits from either facial features or first impressions. First impressions, however, could be inferred more reliably from facial features. We have generated artificial, extreme faces visualising the characteristics having an effect on first impressions for several traits. Conclusively, we find a relationship between first impressions, some personality traits and facial features and consolidate that people on average assess a given face in a highly similar manner.

On the interaction of vortices and internal waves in the dead-water problem

NASA Astrophysics Data System (ADS)

Hester, Eric

2017-11-01

Dead water refers to a mysterious increase in resistance experienced by boats in density-stratified waters. The problem has been documented since ancient times, and studied scientifically for over a century. These investigations have revealed the role of internal waves in generating drag. However, analytical approaches neglect important vortex dynamics, which experiments fail to visualise. For the first time, we study the phenomenon using state-of-the-art numerical simulations. We reproduce the effect and show it is greatest in strongly nonlinear regimes poorly modelled by current theory. The most exciting development found a new trailing vortex coupled to the boat. This robust structure is consistent with sailors accounts, but has been missed in previous scientific studies. We expect these results to lead to actionable ways to mitigate dead water in the real world.

An exploration of counterfeit medicine surveillance strategies guided by geospatial analysis: lessons learned from counterfeit Avastin detection in the US drug supply chain.

PubMed

Cuomo, Raphael E; Mackey, Tim K

2014-12-02

To explore healthcare policy and system improvements that would more proactively respond to future penetration of counterfeit cancer medications in the USA drug supply chain using geospatial analysis. A statistical and geospatial analysis of areas that received notices from the Food and Drug Administration (FDA) about the possibility of counterfeit Avastin penetrating the US drug supply chain. Data from FDA warning notices were compared to data from 44 demographic variables available from the US Census Bureau via correlation, means testing and geospatial visualisation. Results were interpreted in light of existing literature in order to recommend improvements to surveillance of counterfeit medicines. This study analysed 791 distinct healthcare provider addresses that received FDA warning notices across 30,431 zip codes in the USA. Statistical outputs were Pearson's correlation coefficients and t values. Geospatial outputs were cartographic visualisations. These data were used to generate the overarching study outcome, which was a recommendation for a strategy for drug safety surveillance congruent with existing literature on counterfeit medication. Zip codes with greater numbers of individuals age 65+ and greater numbers of ethnic white individuals were most correlated with receipt of a counterfeit Avastin notice. Geospatial visualisations designed in conjunction with statistical analysis of demographic variables appeared more capable of suggesting areas and populations that may be at risk for undetected counterfeit Avastin penetration. This study suggests that dual incorporation of statistical and geospatial analysis in surveillance of counterfeit medicine may be helpful in guiding efforts to prevent, detect and visualise counterfeit medicines penetrations in the US drug supply chain and other settings. Importantly, the information generated by these analyses could be utilised to identify at-risk populations associated with demographic characteristics. Stakeholders should explore these results as another tool to improve on counterfeit medicine surveillance. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Using an Interactive Systems Framework to Expand Telepsychology Innovations in Underserved Communities

PubMed Central

Alaniz, Angela B.

2016-01-01

Literature indicates that the use of promising innovations in mental health care can be improved. The advancement of telepsychology is one innovation that has been utilized as a method to reduce rural health disparities and increase the number of people with access to mental health services. This paper describes a successful pilot telepsychology program implemented in a rural community to increase access to mental health services and the model's replication and expansion into four additional communities using concepts described in an Interactive Systems Framework. The Interactive Systems Framework highlights how building local capacity specific to organizational functioning and innovations are necessary to support, deliver, and disseminate innovations within new settings. Based on the knowledge gained from this telepsychology innovation, the application of an Interactive Systems Framework and funding mechanisms are discussed. PMID:27403374

Kinetic Framework for the Magnetosphere-Ionosphere-Plasmasphere-Polar Wind System: Modeling Ion Outflow

NASA Astrophysics Data System (ADS)

Schunk, R. W.; Barakat, A. R.; Eccles, V.; Karimabadi, H.; Omelchenko, Y.; Khazanov, G. V.; Glocer, A.; Kistler, L. M.

2014-12-01

A Kinetic Framework for the Magnetosphere-Ionosphere-Plasmasphere-Polar Wind System is being developed in order to provide a rigorous approach to modeling the interaction of hot and cold particle interactions. The framework will include ion and electron kinetic species in the ionosphere, plasmasphere and polar wind, and kinetic ion, super-thermal electron and fluid electron species in the magnetosphere. The framework is ideally suited to modeling ion outflow from the ionosphere and plasmasphere, where a wide range for fluid and kinetic processes are important. These include escaping ion interactions with (1) photoelectrons, (2) cusp/auroral waves, double layers, and field-aligned currents, (3) double layers in the polar cap due to the interaction of cold ionospheric and hot magnetospheric electrons, (4) counter-streaming ions, and (5) electromagnetic wave turbulence. The kinetic ion interactions are particularly strong during geomagnetic storms and substorms. The presentation will provide a brief description of the models involved and discuss the effect that kinetic processes have on the ion outflow.

Efficient visibility-driven medical image visualisation via adaptive binned visibility histogram.

PubMed

Jung, Younhyun; Kim, Jinman; Kumar, Ashnil; Feng, David Dagan; Fulham, Michael

2016-07-01

'Visibility' is a fundamental optical property that represents the observable, by users, proportion of the voxels in a volume during interactive volume rendering. The manipulation of this 'visibility' improves the volume rendering processes; for instance by ensuring the visibility of regions of interest (ROIs) or by guiding the identification of an optimal rendering view-point. The construction of visibility histograms (VHs), which represent the distribution of all the visibility of all voxels in the rendered volume, enables users to explore the volume with real-time feedback about occlusion patterns among spatially related structures during volume rendering manipulations. Volume rendered medical images have been a primary beneficiary of VH given the need to ensure that specific ROIs are visible relative to the surrounding structures, e.g. the visualisation of tumours that may otherwise be occluded by neighbouring structures. VH construction and its subsequent manipulations, however, are computationally expensive due to the histogram binning of the visibilities. This limits the real-time application of VH to medical images that have large intensity ranges and volume dimensions and require a large number of histogram bins. In this study, we introduce an efficient adaptive binned visibility histogram (AB-VH) in which a smaller number of histogram bins are used to represent the visibility distribution of the full VH. We adaptively bin medical images by using a cluster analysis algorithm that groups the voxels according to their intensity similarities into a smaller subset of bins while preserving the distribution of the intensity range of the original images. We increase efficiency by exploiting the parallel computation and multiple render targets (MRT) extension of the modern graphical processing units (GPUs) and this enables efficient computation of the histogram. We show the application of our method to single-modality computed tomography (CT), magnetic resonance (MR) imaging and multi-modality positron emission tomography-CT (PET-CT). In our experiments, the AB-VH markedly improved the computational efficiency for the VH construction and thus improved the subsequent VH-driven volume manipulations. This efficiency was achieved without major degradation in the VH visually and numerical differences between the AB-VH and its full-bin counterpart. We applied several variants of the K-means clustering algorithm with varying Ks (the number of clusters) and found that higher values of K resulted in better performance at a lower computational gain. The AB-VH also had an improved performance when compared to the conventional method of down-sampling of the histogram bins (equal binning) for volume rendering visualisation. Copyright © 2016 Elsevier Ltd. All rights reserved.

First Prototype of a Web Map Interface for ESA's Planetary Science Archive (PSA)

NASA Astrophysics Data System (ADS)

Manaud, N.; Gonzalez, J.

2014-04-01

We present a first prototype of a Web Map Interface that will serve as a proof of concept and design for ESA's future fully web-based Planetary Science Archive (PSA) User Interface. The PSA is ESA's planetary science archiving authority and central repository for all scientific and engineering data returned by ESA's Solar System missions [1]. All data are compliant with NASA's Planetary Data System (PDS) Standards and are accessible through several interfaces [2]: in addition to serving all public data via FTP and the Planetary Data Access Protocol (PDAP), a Java-based User Interface provides advanced search, preview, download, notification and delivery-basket functionality. It allows the user to query and visualise instrument observations footprints using a map-based interface (currently only available for Mars Express HRSC and OMEGA instruments). During the last decade, the planetary mapping science community has increasingly been adopting Geographic Information System (GIS) tools and standards, originally developed for and used in Earth science. There is an ongoing effort to produce and share cartographic products through Open Geospatial Consortium (OGC) Web Services, or as standalone data sets, so that they can be readily used in existing GIS applications [3,4,5]. Previous studies conducted at ESAC [6,7] have helped identify the needs of Planetary GIS users, and define key areas of improvement for the future Web PSA User Interface. Its web map interface shall will provide access to the full geospatial content of the PSA, including (1) observation geometry footprints of all remote sensing instruments, and (2) all georeferenced cartographic products, such as HRSC map-projected data or OMEGA global maps from Mars Express. It shall aim to provide a rich user experience for search and visualisation of this content using modern and interactive web mapping technology. A comprehensive set of built-in context maps from external sources, such as MOLA topography, TES infrared maps or planetary surface nomenclature, provided in both simple cylindrical and polar stereographic projections, shall enhance this user experience. In addition, users should be able to import and export data in commonly used open- GIS formats. It is also intended to serve all PSA geospatial data through OGC-compliant Web Services so that they can be captured, visualised and analysed directly from GIS software, along with data from other sources. The following figure illustrates how the PSA web map interface and services shall fit in a typical Planetary GIS user working environment.

A unifying framework for quantifying the nature of animal interactions.

PubMed

Potts, Jonathan R; Mokross, Karl; Lewis, Mark A

2014-07-06

Collective phenomena, whereby agent-agent interactions determine spatial patterns, are ubiquitous in the animal kingdom. On the other hand, movement and space use are also greatly influenced by the interactions between animals and their environment. Despite both types of interaction fundamentally influencing animal behaviour, there has hitherto been no unifying framework for the models proposed in both areas. Here, we construct a general method for inferring population-level spatial patterns from underlying individual movement and interaction processes, a key ingredient in building a statistical mechanics for ecological systems. We show that resource selection functions, as well as several examples of collective motion models, arise as special cases of our framework, thus bringing together resource selection analysis and collective animal behaviour into a single theory. In particular, we focus on combining the various mechanistic models of territorial interactions in the literature with step selection functions, by incorporating interactions into the step selection framework and demonstrating how to derive territorial patterns from the resulting models. We demonstrate the efficacy of our model by application to a population of insectivore birds in the Amazon rainforest. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

Interactive map of refugee movement in Europe

NASA Astrophysics Data System (ADS)

Calka, Beata; Cahan, Bruce

2016-12-01

Considering the recent mass movement of people fleeing war and oppression, an analysis of changes in migration, in particular an analysis of the final destination refugees choose, seems to be of utmost importance. Many international organisations like UNHCR (the United Nations High Commissioner for Refugees) or EuroStat gather and provide information on the number of refugees and the routes they follow. What is also needed to study the state of affairs closely is a visual form presenting the rapidly changing situation. An analysis of the problem together with up-to-date statistical data presented in the visual form of a map is essential. This article describes methods of preparing such interactive maps displaying movement of refugees in European Union countries. Those maps would show changes taking place throughout recent years but also the dynamics of the development of the refugee crisis in Europe. The ArcGIS software was applied to make the map accessible on the Internet. Additionally, online sources and newspaper articles were used to present the movement of migrants. The interactive map makes it possible to watch spatial data with an opportunity to navigate within the map window. Because of that it is a clear and convenient tool to visualise such processes as refugee migration in Europe.

Building interactive virtual environments for simulated training in medicine using VRML and Java/JavaScript.

PubMed

Korocsec, D; Holobar, A; Divjak, M; Zazula, D

2005-12-01

Medicine is a difficult thing to learn. Experimenting with real patients should not be the only option; simulation deserves a special attention here. Virtual Reality Modelling Language (VRML) as a tool for building virtual objects and scenes has a good record of educational applications in medicine, especially for static and animated visualisations of body parts and organs. However, to create computer simulations resembling situations in real environments the required level of interactivity and dynamics is difficult to achieve. In the present paper we describe some approaches and techniques which we used to push the limits of the current VRML technology further toward dynamic 3D representation of virtual environments (VEs). Our demonstration is based on the implementation of a virtual baby model, whose vital signs can be controlled from an external Java application. The main contributions of this work are: (a) outline and evaluation of the three-level VRML/Java implementation of the dynamic virtual environment, (b) proposal for a modified VRML Timesensor node, which greatly improves the overall control of system performance, and (c) architecture of the prototype distributed virtual environment for training in neonatal resuscitation comprising the interactive virtual newborn, active bedside monitor for vital signs and full 3D representation of the surgery room.

Visualising the invisible: a network approach to reveal the informal social side of student learning.

PubMed

Hommes, J; Rienties, B; de Grave, W; Bos, G; Schuwirth, L; Scherpbier, A

2012-12-01

World-wide, universities in health sciences have transformed their curriculum to include collaborative learning and facilitate the students' learning process. Interaction has been acknowledged to be the synergistic element in this learning context. However, students spend the majority of their time outside their classroom and interaction does not stop outside the classroom. Therefore we studied how informal social interaction influences student learning. Moreover, to explore what really matters in the students learning process, a model was tested how the generally known important constructs-prior performance, motivation and social integration-relate to informal social interaction and student learning. 301 undergraduate medical students participated in this cross-sectional quantitative study. Informal social interaction was assessed using self-reported surveys following the network approach. Students' individual motivation, social integration and prior performance were assessed by the Academic Motivation Scale, the College Adaption Questionnaire and students' GPA respectively. A factual knowledge test represented student' learning. All social networks were positively associated with student learning significantly: friendships (β = 0.11), providing information to other students (β = 0.16), receiving information from other students (β = 0.25). Structural equation modelling revealed a model in which social networks increased student learning (r = 0.43), followed by prior performance (r = 0.31). In contrast to prior literature, students' academic motivation and social integration were not associated with students' learning. Students' informal social interaction is strongly associated with students' learning. These findings underline the need to change our focus from the formal context (classroom) to the informal context to optimize student learning and deliver modern medics.

Investigating the feasibility of Visualising Complex Space Weather Data in a CAVE

NASA Astrophysics Data System (ADS)

Loughlin, S.; Habash Krause, L.

2013-12-01

The purpose of this study was to investigate the feasibility of visualising complex space weather data in a Cave Automatic Virtual Environment (CAVE). Space weather is increasingly causing disruptions on Earth, such as power outages and disrupting communication to satellites. We wanted to display this space weather data within the CAVE since the data from instruments, models and simulations are typically too complex to understand on their own, especially when they are of 7 dimensions. To accomplish this, I created a VTK to NetCDF converter. NetCDF is a science data format, which stores array oriented scientific data. The format is maintained by the University Corporation for Atmospheric Research, and is used extensively by the atmospheric and space communities.

In-situ visualisation of hyphal structure and arrangement in mycoprotein pastes.

PubMed

Miri, Taghi; Cox, Philip W; Fryer, Peter J

2003-02-01

A novel method to examine the morphology and structure of fungal hyphae in solid pastes used for the production of meat alternative product is presented. A sample of fermentation broth was fluorescently stained with Calcofluor White and added back to the broth, mixed and then a paste made using ultra-filtration. Fibre visualisation was by fluorescence microscopy and quantification by manual image analysis. This method enables the determination of fibre length and orientation within the paste. Imaging of the hypha fibre paste proved that its structure was 'isotropic', i.e. that fibres were randomly oriented in all directions. Processing of the paste altered the orientation of the fibres, the method was able to identify and quantify the changes in fibre position.

Analysis of musical expression in audio signals

NASA Astrophysics Data System (ADS)

Dixon, Simon

2003-01-01

In western art music, composers communicate their work to performers via a standard notation which specificies the musical pitches and relative timings of notes. This notation may also include some higher level information such as variations in the dynamics, tempo and timing. Famous performers are characterised by their expressive interpretation, the ability to convey structural and emotive information within the given framework. The majority of work on audio content analysis focusses on retrieving score-level information; this paper reports on the extraction of parameters describing the performance, a task which requires a much higher degree of accuracy. Two systems are presented: BeatRoot, an off-line beat tracking system which finds the times of musical beats and tracks changes in tempo throughout a performance, and the Performance Worm, a system which provides a real-time visualisation of the two most important expressive dimensions, tempo and dynamics. Both of these systems are being used to process data for a large-scale study of musical expression in classical and romantic piano performance, which uses artificial intelligence (machine learning) techniques to discover fundamental patterns or principles governing expressive performance.

Virtual planning for craniomaxillofacial surgery--7 years of experience.

PubMed

Adolphs, Nicolai; Haberl, Ernst-Johannes; Liu, Weichen; Keeve, Erwin; Menneking, Horst; Hoffmeister, Bodo

2014-07-01

Contemporary computer-assisted surgery systems more and more allow for virtual simulation of even complex surgical procedures with increasingly realistic predictions. Preoperative workflows are established and different commercially software solutions are available. Potential and feasibility of virtual craniomaxillofacial surgery as an additional planning tool was assessed retrospectively by comparing predictions and surgical results. Since 2006 virtual simulation has been performed in selected patient cases affected by complex craniomaxillofacial disorders (n = 8) in addition to standard surgical planning based on patient specific 3d-models. Virtual planning could be performed for all levels of the craniomaxillofacial framework within a reasonable preoperative workflow. Simulation of even complex skeletal displacements corresponded well with the real surgical result and soft tissue simulation proved to be helpful. In combination with classic 3d-models showing the underlying skeletal pathology virtual simulation improved planning and transfer of craniomaxillofacial corrections. Additional work and expenses may be justified by increased possibilities of visualisation, information, instruction and documentation in selected craniomaxillofacial procedures. Copyright © 2013 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Temperature dependent CO2 behavior in microporous 1-D channels of a metal-organic framework with multiple interaction sites

PubMed Central

Kim, Dongwook; Park, Jaehun; Kim, Yung Sam; Lah, Myoung Soo

2017-01-01

The MOF with the encapsulated CO2 molecule shows that the CO2 molecule is ligated to the unsaturated Cu(II) sites in the cage using its Lewis basic oxygen atom via an angular η1-(OA) coordination mode and also interacts with Lewis basic nitrogen atoms of the tetrazole ligands using its Lewis acidic carbon atom. Temperature dependent structure analyses indicate the simultaneous weakening of both interactions as temperature increases. Infrared spectroscopy of the MOF confirmed that the CO2 interaction with the framework is temperature dependent. The strength of the interaction is correlated to the separation of the two bending peaks of the bound CO2 rather than the frequency shift of the asymmetric stretching peak from that of free CO2. The encapsulated CO2 in the cage is weakly interacting with the framework at around ambient temperatures and can have proper orientation for wiggling out of the cage through the narrow portals so that the reversible uptake can take place. On the other hand, the CO2 in the cage is restrained at a specific orientation at 195 K since it interacts with the framework strong enough using the multiple interaction sites so that adsorption process is slightly restricted and desorption process is almost clogged. PMID:28128298

Video Games in Volcanic Hazard Communications: Methods & Issues

NASA Astrophysics Data System (ADS)

Mani, Lara; Cole, Paul; Stewart, Iain

2016-04-01

Educational outreach plays a vital role in improving the resilience of vulnerable populations at risk from natural disasters. Currently, that activity is undertaken in many guises including the distribution of leaflets and posters, maps, presentations, education sessions and through radio and TV broadcasts. Such tried-and-tested communication modes generally target traditional stakeholder groups, but it is becoming increasingly important to engage with the new generation of learners who, due to advancements in technology, obtain information in ways different to their predecessors. That new generation is defined by a technological way of life and it remains a challenge to keep them motivated. On the eastern Caribbean island of St. Vincent, the La Soufriere Volcano lies in quiescence since the last eruption in 1979. Since then, an entire generation - over 56% of the population (Worldbank, 2015) - has little or no direct experience of a volcanic eruption. The island experiences, more frequently, other hazards (hurricanes, flooding, earthquakes landsliding), such that disaster preparedness measures give less priority to volcanic threats, which are deemed to pose less of a risk. With no accurate predictions to warn of the next eruption, it is especially important to educate residents about the potential of future volcanic hazards on the island, and to motivate them to prepare to mitigate their risk. This research critically examines the application of video games in supporting and enhancing existing public education and outreach programmes for volcanic hazards. St. Vincent's Volcano is a computer game designed to improve awareness and knowledge of the eruptive phenomena from La Soufriere that could pose a threat to residents. Within an interactive and immersive environment, players become acquainted with a 3D model of St. Vincent together with an overlay of the established volcanic hazard map (Robertson, 2005). Players are able to view visualisations of two historical eruptions (1902 &1979), which are reproduced based on historical data and personal accounts of the eruptions. Through a series of interactive scenes, each of the principal hazardous phenomena associated with La Soufriere - pyroclastic flows & surges, ash fall and lahars - are visualised and explained. The game concludes with a quiz in which players are required to answer questions are based on information provided throughout the game. The St. Vincent's Volcano game was trialled in St. Vincent during a volcano awareness education week in April 2015. The presentation will share reflections on how this type of interactive tool can be tested and implemented, and explore the issues and challenges with using video games in a dynamic environment.

Multi-tasking arbitration and behaviour design for human-interactive robots

NASA Astrophysics Data System (ADS)

Kobayashi, Yuichi; Onishi, Masaki; Hosoe, Shigeyuki; Luo, Zhiwei

2013-05-01

Robots that interact with humans in household environments are required to handle multiple real-time tasks simultaneously, such as carrying objects, collision avoidance and conversation with human. This article presents a design framework for the control and recognition processes to meet these requirements taking into account stochastic human behaviour. The proposed design method first introduces a Petri net for synchronisation of multiple tasks. The Petri net formulation is converted to Markov decision processes and processed in an optimal control framework. Three tasks (safety confirmation, object conveyance and conversation) interact and are expressed by the Petri net. Using the proposed framework, tasks that normally tend to be designed by integrating many if-then rules can be designed in a systematic manner in a state estimation and optimisation framework from the viewpoint of the shortest time optimal control. The proposed arbitration method was verified by simulations and experiments using RI-MAN, which was developed for interactive tasks with humans.

A Proposed Framework between Internal, External and Pedagogy Dimensions in Adoption of Interactive Multimedia e-Learning

ERIC Educational Resources Information Center

Lahwal, Fathia; Al-Ajlan, Ajlan S.; Amain, Mohamad

2016-01-01

This study focuses on interactive multimedia e-learning aims to improve our understanding about the dynamics of e-learning. The objective is to critical evaluate and better understand the interrelationships in the proposed framework between internal, external and the pedagogy dimensions in adoption of interactive multimedia and e-learning. It…

Surgical model-view-controller simulation software framework for local and collaborative applications

PubMed Central

Sankaranarayanan, Ganesh; Halic, Tansel; Arikatla, Venkata Sreekanth; Lu, Zhonghua; De, Suvranu

2010-01-01

Purpose Surgical simulations require haptic interactions and collaboration in a shared virtual environment. A software framework for decoupled surgical simulation based on a multi-controller and multi-viewer model-view-controller (MVC) pattern was developed and tested. Methods A software framework for multimodal virtual environments was designed, supporting both visual interactions and haptic feedback while providing developers with an integration tool for heterogeneous architectures maintaining high performance, simplicity of implementation, and straightforward extension. The framework uses decoupled simulation with updates of over 1,000 Hz for haptics and accommodates networked simulation with delays of over 1,000 ms without performance penalty. Results The simulation software framework was implemented and was used to support the design of virtual reality-based surgery simulation systems. The framework supports the high level of complexity of such applications and the fast response required for interaction with haptics. The efficacy of the framework was tested by implementation of a minimally invasive surgery simulator. Conclusion A decoupled simulation approach can be implemented as a framework to handle simultaneous processes of the system at the various frame rates each process requires. The framework was successfully used to develop collaborative virtual environments (VEs) involving geographically distributed users connected through a network, with the results comparable to VEs for local users. PMID:20714933

Surgical model-view-controller simulation software framework for local and collaborative applications.

PubMed

Maciel, Anderson; Sankaranarayanan, Ganesh; Halic, Tansel; Arikatla, Venkata Sreekanth; Lu, Zhonghua; De, Suvranu

2011-07-01

Surgical simulations require haptic interactions and collaboration in a shared virtual environment. A software framework for decoupled surgical simulation based on a multi-controller and multi-viewer model-view-controller (MVC) pattern was developed and tested. A software framework for multimodal virtual environments was designed, supporting both visual interactions and haptic feedback while providing developers with an integration tool for heterogeneous architectures maintaining high performance, simplicity of implementation, and straightforward extension. The framework uses decoupled simulation with updates of over 1,000 Hz for haptics and accommodates networked simulation with delays of over 1,000 ms without performance penalty. The simulation software framework was implemented and was used to support the design of virtual reality-based surgery simulation systems. The framework supports the high level of complexity of such applications and the fast response required for interaction with haptics. The efficacy of the framework was tested by implementation of a minimally invasive surgery simulator. A decoupled simulation approach can be implemented as a framework to handle simultaneous processes of the system at the various frame rates each process requires. The framework was successfully used to develop collaborative virtual environments (VEs) involving geographically distributed users connected through a network, with the results comparable to VEs for local users.

Biogeography of diseases: a framework for analysis

NASA Astrophysics Data System (ADS)

Peterson, A. Townsend

2008-06-01

A growing body of literature offers a framework for understanding geographic and ecological distributions of species; a few applications of this framework have treated disease transmission systems and their geography. The general framework focuses on interactions among abiotic requirements, biotic constraints, and dispersal abilities of species as determinants of distributional areas. Disease transmission systems have key differences from other sorts of biological phenomena: Interactions among species are particularly important, interactions may be stable or unstable, abiotic conditions may be relatively less important in shaping disease distributions, and dispersal abilities may be quite variable. The ways in which these differences may influence disease transmission geography are complex; I illustrate their effects by means of worked examples regarding West Nile Virus, plague, filoviruses, and yellow fever.

Toward a framework for levels of robot autonomy in human-robot interaction.

PubMed

Beer, Jenay M; Fisk, Arthur D; Rogers, Wendy A

2014-07-01

A critical construct related to human-robot interaction (HRI) is autonomy, which varies widely across robot platforms. Levels of robot autonomy (LORA), ranging from teleoperation to fully autonomous systems, influence the way in which humans and robots may interact with one another. Thus, there is a need to understand HRI by identifying variables that influence - and are influenced by - robot autonomy. Our overarching goal is to develop a framework for levels of robot autonomy in HRI. To reach this goal, the framework draws links between HRI and human-automation interaction, a field with a long history of studying and understanding human-related variables. The construct of autonomy is reviewed and redefined within the context of HRI. Additionally, the framework proposes a process for determining a robot's autonomy level, by categorizing autonomy along a 10-point taxonomy. The framework is intended to be treated as guidelines to determine autonomy, categorize the LORA along a qualitative taxonomy, and consider which HRI variables (e.g., acceptance, situation awareness, reliability) may be influenced by the LORA.

Toward a framework for levels of robot autonomy in human-robot interaction

PubMed Central

Beer, Jenay M.; Fisk, Arthur D.; Rogers, Wendy A.

2017-01-01

A critical construct related to human-robot interaction (HRI) is autonomy, which varies widely across robot platforms. Levels of robot autonomy (LORA), ranging from teleoperation to fully autonomous systems, influence the way in which humans and robots may interact with one another. Thus, there is a need to understand HRI by identifying variables that influence – and are influenced by – robot autonomy. Our overarching goal is to develop a framework for levels of robot autonomy in HRI. To reach this goal, the framework draws links between HRI and human-automation interaction, a field with a long history of studying and understanding human-related variables. The construct of autonomy is reviewed and redefined within the context of HRI. Additionally, the framework proposes a process for determining a robot’s autonomy level, by categorizing autonomy along a 10-point taxonomy. The framework is intended to be treated as guidelines to determine autonomy, categorize the LORA along a qualitative taxonomy, and consider which HRI variables (e.g., acceptance, situation awareness, reliability) may be influenced by the LORA. PMID:29082107

Symbolic and Interactional Perspectives on Leadership: An Integrative Framework.

DTIC Science & Technology

1985-05-01

RD-RI55 24? SYMBOLIC AND INTERACTIONAL PERSPECTIVES ON LEADERSHIP: 1/1 AN INTEGRATIVE FRA..(U) TEXAS A AND M UNIV COLLEGE STATION DEPT OF MANAGEMENT...Processing Systems Office of Naval Research Technical Report Series Symbolic and Interactional 11% Perspectives on Leadership: An Integrative Framework...Richard Daft -~ and Ricky Griffin CAs * Principal Investigators IThi. dmmu asbom apro 1W ~ ~ 1W ~ w 4 d a% f dkbsa Symbolic and Interactional Perspectives

In vitro stent lumen visualisation of various common and newly developed femoral artery stents using MR angiography at 1.5 and 3 tesla.

PubMed

Syha, R; Ketelsen, D; Kaempf, M; Mangold, S; Sixt, S; Zeller, T; Springer, F; Schick, F; Claussen, C D; Brechtel, K

2013-02-01

To evaluate stent lumen assessment of various commonly used and newly developed stents for the superficial femoral artery (SFA) using MR angiography (MRA) at 1.5 and 3 T. Eleven nitinol stents and one cobalt-chromium stent were compared regarding stent lumen visualisation using a common three-dimensional MRA sequence. Maximum visible stent lumen width and contrast ratio were analysed in three representative slices for each stent type. A scoring system for lumen visualisation was applied. Nitinol stents showed significantly better performance than the cobalt chromium stent (P < 0.05) at 1.5 and 3 T. Maximum visible stent lumen ranged between 43.4 and 95.5 %, contrast ratio between 7.2 and 110.6 %. Regarding both field strengths, seven of the nitinol stents were classified as "suitable". Three nitinol stents were "limited", and one nitinol stent and the cobalt chromium stent were "not suitable". Intraluminal loss of signal and artefacts of most of the SFA stents do not markedly limit assessment of stent lumen by MRA at 1.5 and 3 T. MRA can thus be considered a valid technique for detection of relevant in-stent restenosis. Applied field strength does not strongly influence stent lumen assessment in general, but proper choice of field strength might be helpful.

Digital Field Mapping with the British Geological Survey

NASA Astrophysics Data System (ADS)

Leslie, Graham; Smith, Nichola; Jordan, Colm

2014-05-01

The BGS•SIGMA project was initiated in 2001 in response to a major stakeholder review of onshore mapping within the British Geological Survey (BGS). That review proposed a significant change for BGS with the recommendation that digital methods should be implemented for field mapping and data compilation. The BGS•SIGMA project (System for Integrated Geoscience MApping) is an integrated workflow for geoscientific surveying and visualisation using digital methods for geological data visualisation, recording and interpretation, in both 2D and 3D. The project has defined and documented an underpinning framework of best practice for survey and information management, best practice that has then informed the design brief and specification for a toolkit to support this new methodology. The project has now delivered BGS•SIGMA2012. BGS•SIGMA2012 is a integrated toolkit which enables assembly and interrogation/visualisation of existing geological information; capture of, and integration with, new data and geological interpretations; and delivery of 3D digital products and services. From its early days as a system which used PocketGIS run on Husky Fex21 hardware, to the present day system which runs on ruggedized tablet PCs with integrated GPS units, the system has evolved into a complete digital mapping and compilation system. BGS•SIGMA2012 uses a highly customised version of ESRI's ArcGIS 10 and 10.1 with a fully relational Access 2007/2010 geodatabase. BGS•SIGMA2012 is the third external release of our award-winning digital field mapping toolkit. The first free external release of the award-winning digital field mapping toolkit was in 2009, with the third version (BGS-SIGMAmobile2012 v1.01) released on our website (http://www.bgs.ac.uk/research/sigma/home.html) in 2013. The BGS•SIGMAmobile toolkit formed the major part of the first two releases but this new version integrates the BGS•SIGMAdesktop functionality that BGS routinely uses to transform our field data into corporate standard geological models and derivative map outputs. BGS•SIGMA2012 is the default toolkit within BGS for bedrock and superficial geological mapping and other data acquisition projects across the UK, both onshore and offshore. It is used in mapping projects in Africa, the Middle East and the USA, and has been taken to Japan as part of the Tohoku tsunami damage assessment project. It is also successfully being used worldwide by other geological surveys e.g. Norway and Tanzania; by universities including Leicester, Keele and Kyoto, and by organisations such as Vale Mining in Brazil and the Montana Bureau of Mines and Geology. It is used globally, with over 2000 licenses downloaded worldwide to date and in use on all seven continents. Development of the system is still ongoing as a result of both user feedback and the changing face of technology. Investigations into the development of a BGS•SIGMA smartphone app are currently taking place alongside system developments such as a new and more streamlined data entry system.

Model Fusion Tool - the Open Environmental Modelling Platform Concept

NASA Astrophysics Data System (ADS)

Kessler, H.; Giles, J. R.

2010-12-01

The vision of an Open Environmental Modelling Platform - seamlessly linking geoscience data, concepts and models to aid decision making in times of environmental change. Governments and their executive agencies across the world are facing increasing pressure to make decisions about the management of resources in light of population growth and environmental change. In the UK for example, groundwater is becoming a scarce resource for large parts of its most densely populated areas. At the same time river and groundwater flooding resulting from high rainfall events are increasing in scale and frequency and sea level rise is threatening the defences of coastal cities. There is also a need for affordable housing, improved transport infrastructure and waste disposal as well as sources of renewable energy and sustainable food production. These challenges can only be resolved if solutions are based on sound scientific evidence. Although we have knowledge and understanding of many individual processes in the natural sciences it is clear that a single science discipline is unable to answer the questions and their inter-relationships. Modern science increasingly employs computer models to simulate the natural, economic and human system. Management and planning requires scenario modelling, forecasts and ‘predictions’. Although the outputs are often impressive in terms of apparent accuracy and visualisation, they are inherently not suited to simulate the response to feedbacks from other models of the earth system, such as the impact of human actions. Geological Survey Organisations (GSO) are increasingly employing advances in Information Technology to visualise and improve their understanding of geological systems. Instead of 2 dimensional paper maps and reports many GSOs now produce 3 dimensional geological framework models and groundwater flow models as their standard output. Additionally the British Geological Survey have developed standard routines to link geological data to groundwater models but these models are only aimed at solving one specific part of the earth’s system, e.g. the flow of groundwater to an abstraction borehole or the availability of water for irrigation. Particular problems arise when model data from two or more disciplines are incompatible in terms of data formats, scientific concepts or language. Other barriers include the cultural segregation within and between science disciplines as well as impediments to data exchange due to ownership and copyright restrictions. OpenMI and GeoSciML are initiatives that are trying to overcome these barriers by building international communities that share vocabularies and data formats. This paper gives examples of the successful merging of geological and hydrological models from the UK and will introduce the vision of an open Environmental Modelling Platform which aims to link data, knowledge and concepts seamlessly to numerical process models. Last but not least there is an urgent need to create a Subsurface Information System akin to a Geographic Information System in which all results of subsurface modelling can be visualised and analysed in an integrated manner and thereby become useful for decision makers.

Integrated modeling of natural and human systems - problems and initiatives

NASA Astrophysics Data System (ADS)

Kessler, H.; Giles, J.; Gunnink, J.; Hughes, A.; Moore, R. V.; Peach, D.

2009-12-01

Governments and their executive agencies across the world are facing increasing pressure to make decisions about the management of resources in light of population growth and environmental change. In the UK and the Netherlands, for example, groundwater is becoming a scarce resource for large parts of its most densely populated areas. At the same time river and groundwater flooding resulting from high rainfall events are increasing in scale and frequency and sea level rise is threatening the defences of coastal cities. There is also a need for affordable housing, improved transport infrastructure and waste disposal as well as sources of renewable energy and sustainable food production. These challenges can only be resolved if solutions are based on sound scientific evidence. Although we have knowledge and understanding of many individual processes in the natural sciences it is clear that a single science discipline is unable to answer the questions and their inter-relationships. Modern science increasingly employs computer models to simulate the natural, economic and human system. Management and planning requires scenario modelling, forecasts and “predictions”. Although the outputs are often impressive in terms of apparent accuracy and visualisation, they are inherently not suited to simulate the response to feedbacks from other models of the earth system, such as the impact of human actions. Geological Survey Organisations (GSO) are increasingly employing advances in Information Technology to visualise and improve their understanding of geological systems. Instead of 2 dimensional paper maps and reports many GSOs now produce 3 dimensional geological framework models and groundwater flow models as their standard output. Additionally the British Geological Survey and the Geological Survey of the Netherlands have developed standard routines to link geological data to groundwater models, but these models are only aimed at solving one specific part of the earth's system, e.g. the flow of groundwater to an abstraction borehole or the availability of water for irrigation. Particular problems arise when model data from two or more disciplines are incompatible in terms of data formats, scientific concepts or language. Other barriers include the cultural segregation within and between science disciplines as well as impediments to data exchange due to ownership and copyright restrictions. OpenMI and GeoSciML are initiatives that are trying to overcome these barriers by building international communities that share vocabularies and data formats. This paper will give examples of the successful merging of geological and hydrological models from the UK and the Netherlands and will introduce the vision of an open Environmental Modelling Platform which aims to link data, knowledge and concepts seamlessly to numerical process models. Last but not least there is an urgent need to create a Subsurface Management System akin to a Geographic Information System in which all results of subsurface modelling can be visualised and analysed in an integrated manner.

Interaction with Machine Improvisation

NASA Astrophysics Data System (ADS)

Assayag, Gerard; Bloch, George; Cont, Arshia; Dubnov, Shlomo

We describe two multi-agent architectures for an improvisation oriented musician-machine interaction systems that learn in real time from human performers. The improvisation kernel is based on sequence modeling and statistical learning. We present two frameworks of interaction with this kernel. In the first, the stylistic interaction is guided by a human operator in front of an interactive computer environment. In the second framework, the stylistic interaction is delegated to machine intelligence and therefore, knowledge propagation and decision are taken care of by the computer alone. The first framework involves a hybrid architecture using two popular composition/performance environments, Max and OpenMusic, that are put to work and communicate together, each one handling the process at a different time/memory scale. The second framework shares the same representational schemes with the first but uses an Active Learning architecture based on collaborative, competitive and memory-based learning to handle stylistic interactions. Both systems are capable of processing real-time audio/video as well as MIDI. After discussing the general cognitive background of improvisation practices, the statistical modelling tools and the concurrent agent architecture are presented. Then, an Active Learning scheme is described and considered in terms of using different improvisation regimes for improvisation planning. Finally, we provide more details about the different system implementations and describe several performances with the system.

Modeling and Detecting Feature Interactions among Integrated Services of Home Network Systems

NASA Astrophysics Data System (ADS)

Igaki, Hiroshi; Nakamura, Masahide

This paper presents a framework for formalizing and detecting feature interactions (FIs) in the emerging smart home domain. We first establish a model of home network system (HNS), where every networked appliance (or the HNS environment) is characterized as an object consisting of properties and methods. Then, every HNS service is defined as a sequence of method invocations of the appliances. Within the model, we next formalize two kinds of FIs: (a) appliance interactions and (b) environment interactions. An appliance interaction occurs when two method invocations conflict on the same appliance, whereas an environment interaction arises when two method invocations conflict indirectly via the environment. Finally, we propose offline and online methods that detect FIs before service deployment and during execution, respectively. Through a case study with seven practical services, it is shown that the proposed framework is generic enough to capture feature interactions in HNS integrated services. We also discuss several FI resolution schemes within the proposed framework.

In-Factory Learning - Qualification For The Factory Of The Future

NASA Astrophysics Data System (ADS)

Quint, Fabian; Mura, Katharina; Gorecky, Dominic

2015-07-01

The Industry 4.0 vision anticipates that internet technologies will find their way into future factories replacing traditional components by dynamic and intelligent cyber-physical systems (CPS) that combine the physical objects with their digital representation. Reducing the gap between the real and digital world makes the factory environment more flexible, more adaptive, but also more complex for the human workers. Future workers require interdisciplinary competencies from engineering, information technology, and computer science in order to understand and manage the diverse interrelations between physical objects and their digital counterpart. This paper proposes a mixed-reality based learning environment, which combines physical objects and visualisation of digital content via Augmented Reality. It uses reality-based interaction in order to make the dynamic interrelations between real and digital factory visible and tangible. We argue that our learning system does not work as a stand-alone solution, but should fit into existing academic and advanced training curricula.

Use of historic metabolic biotransformation data as a means of anticipating metabolic sites using MetaPrint2D and Bioclipse.

PubMed

Carlsson, Lars; Spjuth, Ola; Adams, Samuel; Glen, Robert C; Boyer, Scott

2010-07-01

Predicting metabolic sites is important in the drug discovery process to aid in rapid compound optimisation. No interactive tool exists and most of the useful tools are quite expensive. Here a fast and reliable method to analyse ligands and visualise potential metabolic sites is presented which is based on annotated metabolic data, described by circular fingerprints. The method is available via the graphical workbench Bioclipse, which is equipped with advanced features in cheminformatics. Due to the speed of predictions (less than 50 ms per molecule), scientists can get real time decision support when editing chemical structures. Bioclipse is a rich client, which means that all calculations are performed on the local computer and do not require network connection. Bioclipse and MetaPrint2D are free for all users, released under open source licenses, and available from http://www.bioclipse.net.

Using Browser Notebooks to Analyse Big Atmospheric Data-sets in the Cloud

NASA Astrophysics Data System (ADS)

Robinson, N.; Tomlinson, J.; Arribas, A.; Prudden, R.

2016-12-01

We are presenting an account of our experience building an ecosystem for the analysis of big atmospheric data-sets. By using modern technologies we have developed a prototype platform which is scaleable and capable of analysing very large atmospheric datasets. We tested different big-data ecosystems such as Hadoop MapReduce, Spark and Dask, in order to find the one which was best suited for analysis of multidimensional binary data such as NetCDF. We make extensive use of infrastructure-as-code and containerisation to provide a platform which is reusable, and which can scale to accommodate changes in demand. We make this platform readily accessible using browser based notebooks. As a result, analysts with minimal technology experience can, in tens of lines of Python, make interactive data-visualisation web pages, which can analyse very large amounts of data using cutting edge big-data technology

Features of the Paired Soliton Interactions Within the Framework of the Gardner Equation

NASA Astrophysics Data System (ADS)

Shurgalina, E. G.

2018-02-01

We study the dynamics of the two-soliton interaction within the framework of a completely integrable model, namely, the Gardner equation with negative cubic nonlinearity, which admits the existence of a limiting soliton. The features of the soliton interaction with participation of a thick soliton are demonstrated. Special attention is paid to the nonlinear-interaction influence on the wave-field moments, which determine the skewness and the kurtosis in the theory of turbulence.

Innovative taught MSc in Medical Visualisation and Human Anatomy.

PubMed

Clunie, Lauren; Livingstone, Daniel; Rea, Paul M

2015-06-01

A relatively new, fully accredited MSc in Medical Visualisation and Human Anatomy, is now offered through a joint collaboration with the Laboratory of Human Anatomy, University of Glasgow and the Digital Design Studio, Glasgow School of Art. This degree combines training in digital technologies and intensive human anatomy training as a result of a long-standing successful partnership between these two esteemed institutes. The student also has to complete a research dissertation which encompasses both the digital perspective and a related medical, dental, surgical, veterinary (comparative anatomy) or life science specialty to enhance development in the digital field for a variety of specialties. This article discusses the background in development of this degree, the course structure and the career prospects and destinations for graduates of this unique degree programme.

Novel application of three-dimensional technologies in a case of dismemberment.

PubMed

Baier, Waltraud; Norman, Danielle G; Warnett, Jason M; Payne, Mark; Harrison, Nigel P; Hunt, Nicholas C A; Burnett, Brian A; Williams, Mark A

2017-01-01

This case study reports the novel application of three-dimensional technologies such as micro-CT and 3D printing to the forensic investigation of a complex case of dismemberment. Micro-CT was successfully employed to virtually align severed skeletal elements found in different locations, analyse tool marks created during the dismemberment process, and virtually dissect a charred piece of evidence. High resolution 3D prints of the burnt human bone contained within were created for physical visualisation to assist the investigation team. Micro-CT as a forensic radiological method provided vital information and the basis for visualisation both during the investigation and in the subsequent trial making it one of the first examples of such technology in a UK court. Copyright © 2016. Published by Elsevier B.V.

A novel alternative method for 3D visualisation in Parasitology: the construction of a 3D model of a parasite from 2D illustrations.

PubMed

Teo, B G; Sarinder, K K S; Lim, L H S

2010-08-01

Three-dimensional (3D) models of the marginal hooks, dorsal and ventral anchors, bars and haptoral reservoirs of a parasite, Sundatrema langkawiense Lim & Gibson, 2009 (Monogenea) were developed using the polygonal modelling method in Autodesk 3ds Max (Version 9) based on two-dimensional (2D) illustrations. Maxscripts were written to rotate the modelled 3D structures. Appropriately orientated 3D haptoral hard-parts were then selected and positioned within the transparent 3D outline of the haptor and grouped together to form a complete 3D haptoral entity. This technique is an inexpensive tool for constructing 3D models from 2D illustrations for 3D visualisation of the spatial relationships between the different structural parts within organisms.

Visualisation of collagen fibrils in joint cartilage using STIM

NASA Astrophysics Data System (ADS)

Reinert, T.; Reibetanz, U.; Vogt, J.; Butz, T.; Werner, A.; Gründer, W.

2001-07-01

The scanning transmission ion microscopy (STIM) method was used to investigate the collagen network structure of the articular cartilage from a pig's knee in comparison with high resolution nuclear magnetic resonance imaging (microscopic NMR-tomography) and polarised light microscopy (PLM). Single collagen fibrils down to 200 nm in diameter were visualised. It was proved that the cartilage collagen network consists partly of zones of oriented fibrils as suggested by NMR measurements. Radially oriented fibrils were found in the zone near the calcified zone (hypertrophic zone) of both tibia and femur, and in the tibial radial zone. Tangentially oriented fibrils were found in the femoral and tibial superficial zone and in a second zone of the femoral cartilage. Polarisation light microscopy reveals broader zones of orientation than it was found with STIM.

Making better scientific figures

NASA Astrophysics Data System (ADS)

Hawkins, Ed; McNeall, Doug

2016-04-01

In the words of the UK government chief scientific adviser "Science is not finished until it's communicated" (Walport 2013). The tools to produce good visual communication have never been so easily accessible to scientists as at the present. Correspondingly, it has never been easier to produce and disseminate poor graphics. In this presentation, we highlight some good practice and offer some practical advice in preparing scientific figures for presentation to peers or to the public. We identify common mistakes in visualisation, including some made by the authors, and offer some good reasons not to trust defaults in graphics software. In particular, we discuss the use of colour scales and share our experiences in running a social media campaign (http://tiny.cc/endrainbow) to replace the "rainbow" (also "jet", or "spectral") colour scale as the default in (climate) scientific visualisation.

The Cadmio XML healthcare record.

PubMed

Barbera, Francesco; Ferri, Fernando; Ricci, Fabrizio L; Sottile, Pier Angelo

2002-01-01

The management of clinical data is a complex task. Patient related information reported in patient folders is a set of heterogeneous and structured data accessed by different users having different goals (in local or geographical networks). XML language provides a mechanism for describing, manipulating, and visualising structured data in web-based applications. XML ensures that the structured data is managed in a uniform and transparent manner independently from the applications and their providers guaranteeing some interoperability. Extracting data from the healthcare record and structuring them according to XML makes the data available through browsers. The MIC/MIE model (Medical Information Category/Medical Information Elements), which allows the definition and management of healthcare records and used in CADMIO, a HISA based project, is described in this paper, using XML for allowing the data to be visualised through web browsers.

Multimodal diagnosis and visualisation of oncologic pathologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zakharov, V P; Bratchenko, I A; Myakinin, O O

2014-08-31

The combined application of optical coherence tomography, Raman and autofluorescence spectroscopy of biotissues for the analysis of human malignant neoplasms is demonstrated. Rapid investigation of vast biotissue regions (at the scale of entire organs) is possible using the autofluorescence response. After selection of possible zones of pathologies one can visualise the neoplasm topology in the zone of interest with micron precision by using optical coherence tomography. In the case of suspecting the malignancy the analysis of the biotissue Raman spectrum is carried out that allows identification of the neoplasm type with the sensitivity and specificity ∼85%. An experimental scheme ismore » proposed with the combined use of the abovementioned methods, which is a prototype of the medical system for complex analysis of neoplasms. (laser biophotonics)« less

A definitional framework for the human/biometric sensor interaction model

NASA Astrophysics Data System (ADS)

Elliott, Stephen J.; Kukula, Eric P.

2010-04-01

Existing definitions for biometric testing and evaluation do not fully explain errors in a biometric system. This paper provides a definitional framework for the Human Biometric-Sensor Interaction (HBSI) model. This paper proposes six new definitions based around two classifications of presentations, erroneous and correct. The new terms are: defective interaction (DI), concealed interaction (CI), false interaction (FI), failure to detect (FTD), failure to extract (FTX), and successfully acquired samples (SAS). As with all definitions, the new terms require a modification to the general biometric model developed by Mansfield and Wayman [1].

Applying the Kirkpatrick Model: Evaluating an "Interaction for Learning Framework" Curriculum Intervention

ERIC Educational Resources Information Center

Paull, Megan; Whitsed, Craig; Girardi, Antonia

2016-01-01

Global perspectives and interpersonal and intercultural communication competencies are viewed as a priority within higher education. For management educators, globalisation, student mobility and widening pathways present numerous challenges, but afford opportunities for curriculum innovation. The "Interaction for Learning Framework"…

Self-Determination Theory and Higher Education Student Development

ERIC Educational Resources Information Center

Hove, Tad A.

2017-01-01

Self-determination theory (SDT) posits a framework for human motivation, highlighting an individual's interactions and perceptions of his or her environment. Research incorporating a SDT framework has identified antecedents of psychological need satisfaction (PNS) in human motivation. Individual motivation broadens levels of social interactions as…

Choices, Frameworks and Refinement

NASA Technical Reports Server (NTRS)

Campbell, Roy H.; Islam, Nayeem; Johnson, Ralph; Kougiouris, Panos; Madany, Peter

1991-01-01

In this paper we present a method for designing operating systems using object-oriented frameworks. A framework can be refined into subframeworks. Constraints specify the interactions between the subframeworks. We describe how we used object-oriented frameworks to design Choices, an object-oriented operating system.

Communication: Many-body stabilization of non-covalent interactions: Structure, stability, and mechanics of Ag3Co(CN)6 framework.

PubMed

Liu, Xiaofei; Hermann, Jan; Tkatchenko, Alexandre

2016-12-28

Stimuli-responsive metal-organic frameworks (MOFs) and other framework materials exhibit a broad variety of useful properties, which mainly stem from an interplay of strong covalent bonds within the organic linkers with presumably weak van der Waals (vdW) interactions which determine the overall packing of the framework constituents. Using Ag 3 Co(CN) 6 as a fundamental test case-a system with a colossal positive and negative thermal expansion [A. L. Goodwin et al., Science 319, 794 (2008)]-we demonstrate that its structure, stability, dielectric, vibrational, and mechanical properties are critically influenced by many-body electronic correlation contributions to non-covalent vdW interactions. The Ag 3 Co(CN) 6 framework is a remarkable molecular crystal, being visibly stabilized, rather than destabilized, by many-body vdW correlations. A detailed comparison with H 3 Co(CN) 6 highlights the crucial role of strongly polarized metallophilic interactions in dictating the exceptional properties of denser MOFs. Beyond MOFs, our findings indicate that many-body electronic correlations can substantially stabilize polarizable materials, providing a novel mechanism for tuning the properties of nanomaterials with intricate structural motifs.

Proscene: A feature-rich framework for interactive environments

NASA Astrophysics Data System (ADS)

Charalambos, Jean Pierre

We introduce Proscene, a feature-rich, open-source framework for interactive environments. The design of Proscene comprises a three-layered onion-like software architecture, promoting different possible development scenarios. The framework innermost layer decouples user gesture parsing from user-defined actions. The in-between layer implements a feature-rich set of widely-used motion actions allowing the selection and manipulation of objects, including the scene viewpoint. The outermost layer exposes those features as a Processing library. The results have shown the feasibility of our approach together with the simplicity and flexibility of the Proscene framework API.

Investigation of nanosecond pulse dielectric barrier discharges in still air and in transonic flow by optical methods

NASA Astrophysics Data System (ADS)

Peschke, P.; Goekce, S.; Leyland, P.; Ott, P.

2016-01-01

In the present study the interaction of nanosecond pulsed dielectric barrier discharge (ns-DBD) actuators with aerodynamic flow up to transonic velocities was investigated. The primary focus was on the influence of the flow on the discharge and the effects of the discharge itself. In addition, the influence of the ns-DBD on a shock-wave was studied. The aim was to improve the understanding of the plasma-flow interaction, a topic that is not yet fully understood, in particular for ns-DBD. The actuator was integrated in two different models, a NACA 3506 compressor blade profile and a bump geometry at the bottom of the wind tunnel. The effect of the rapid energy deposition close to the discharge was examined with the phase-locked schlieren visualisation technique. Images of the plasma acquired with short exposure times revealed information on the discharge evolution. The results show a significant effect of the flow on the discharge characteristics, in particular due to the drop of static pressure. On the other hand, no significant effect of the ns-DBD on the flow was observed due to unfavourable flow conditions, which underlines the importance of the actuator’s placement.

Development of the Modes of Collaboration framework

NASA Astrophysics Data System (ADS)

Pawlak, Alanna; Irving, Paul W.; Caballero, Marcos D.

2018-01-01

Group work is becoming increasingly common in introductory physics classrooms. Understanding how students engage in these group learning environments is important for designing and facilitating productive learning opportunities for students. We conducted a study in which we collected video of groups of students working on conceptual electricity and magnetism problems in an introductory physics course. In this setting, students needed to negotiate a common understanding and coordinate group decisions in order to complete the activity successfully. We observed students interacting in several distinct ways while solving these problems. Analysis of these observations focused on identifying the different ways students interacted and articulating what defines and distinguishes them, resulting in the development of the modes of collaboration framework. The modes of collaboration framework defines student interactions along three dimensions: social, discursive, and disciplinary content. This multidimensional approach offers a unique lens through which to consider group work and provides a flexibility that could allow the framework to be adapted for a variety of contexts. We present the framework and several examples of its application here.

A microphysical pathway analysis to investigate aerosol effects on convective clouds

NASA Astrophysics Data System (ADS)

Heikenfeld, Max; White, Bethan; Labbouz, Laurent; Stier, Philip

2017-04-01

The impact of aerosols on ice- and mixed-phase processes in convective clouds remains highly uncertain, which has strong implications for estimates of the role of aerosol-cloud interactions in the climate system. The wide range of interacting microphysical processes are still poorly understood and generally not resolved in global climate models. To understand and visualise these processes and to conduct a detailed pathway analysis, we have added diagnostic output of all individual process rates for number and mass mixing ratios to two commonly-used cloud microphysics schemes (Thompson and Morrison) in WRF. This allows us to investigate the response of individual processes to changes in aerosol conditions and the propagation of perturbations throughout the development of convective clouds. Aerosol effects on cloud microphysics could strongly depend on the representation of these interactions in the model. We use different model complexities with regard to aerosol-cloud interactions ranging from simulations with different levels of fixed cloud droplet number concentration (CDNC) as a proxy for aerosol, to prognostic CDNC with fixed modal aerosol distributions. Furthermore, we have implemented the HAM aerosol model in WRF-chem to also perform simulations with a fully interactive aerosol scheme. We employ a hierarchy of simulation types to understand the evolution of cloud microphysical perturbations in atmospheric convection. Idealised supercell simulations are chosen to present and test the analysis methods for a strongly confined and well-studied case. We then extend the analysis to large case study simulations of tropical convection over the Amazon rainforest. For both cases we apply our analyses to individually tracked convective cells. Our results show the impact of model uncertainties on the understanding of aerosol-convection interactions and have implications for improving process representation in models.

Game theoretical framework in determining house prices

NASA Astrophysics Data System (ADS)

Saiddin, Nor Syuhadah; Zaibidi, Nerda Zura; Sulaiman, Nor Intan Saniah; Abidin, Norhaslinda Zainal

2017-11-01

Housing is a vital component in world's economic development as it provides big contribution of the wealth. The issue of high house prices, worrying several parties, especially middle income buyers in Malaysia. Basically, in housing, there are three main parties involved; buyer, property developer and government. Interaction between those parties will give an impact to the housing market, specifically house prices. The complexity of the interaction has increased due to the differences in each party's preferences and interest. In this research, the main objective is to develop the framework of the interactions among those parties using game theoretical approach. To do so, the preferences and target of each party are investigated and their constraints are established. From the framework, it offers some ideas on how the interaction occurs and how it affect the house prices.

[Investigating work, age, health and work participation in the ageing work force in Germany].

PubMed

Ebener, M; Hasselhorn, H M

2015-04-01

Working life in Germany is changing. The work force is ageing and the number of people available to the labour market will - from now on - shrink considerably. Prospectively, people will have to work longer; but still today, most people leave employment long before reaching official retirement age. What are the reasons for this? In this report, a conceptual framework and the German lidA Cohort Study are presented. The "lidA conceptual framework on work, age, health and work participation" visualises determinants of employment (11 "domains") in higher working age, e. g., "work", "health", "social status" and "life style". The framework reveals 4 key characteristics of withdrawal from work: leaving working life is the result of an interplay of different domains (complexity); (early) retirement is a process with in part early determinants in the life course (processual character); retirement has a strong individual component (individuality); retirement is embedded in a strong structural frame (structure). On the basis of this framework, the "lidA Cohort Study on work, age, health and work participation" (www.lida-studie.de) investigates long-term effects of work on health and work participation in the ageing work force in Germany. It is the only large study in Germany operationalising the concept of employability in a broad interdisciplinary approach. Employees subject to social security and born in 1959 or in 1965 will be interviewed (CAPI) every 3 years (N[wave 1]=6 585, N[wave 2]=4 244) and their data will be linked (where consented) with social security data covering employment history and with health insurance data. The study design ("Schaie's most efficient design") allows for a tri-factor model that isolates the impact of age, cohort and time. In 2014, the second wave was completed. In the coming years lidA will analyse the association of work, health and work participation, and identify age as well as generation differences. lidA will investigate the complexity of work participation and assess the benefit of broader conceptual and methodological research approaches in the field. © Georg Thieme Verlag KG Stuttgart · New York.

A new framework for interactive quality assessment with application to light field coding

NASA Astrophysics Data System (ADS)

Viola, Irene; Ebrahimi, Touradj

2017-09-01

In recent years, light field has experienced a surge of popularity, mainly due to the recent advances in acquisition and rendering technologies that have made it more accessible to the public. Thanks to image-based rendering techniques, light field contents can be rendered in real time on common 2D screens, allowing virtual navigation through the captured scenes in an interactive fashion. However, this richer representation of the scene poses the problem of reliable quality assessments for light field contents. In particular, while subjective methodologies that enable interaction have already been proposed, no work has been done on assessing how users interact with light field contents. In this paper, we propose a new framework to subjectively assess the quality of light field contents in an interactive manner and simultaneously track users behaviour. The framework is successfully used to perform subjective assessment of two coding solutions. Moreover, statistical analysis performed on the results shows interesting correlation between subjective scores and average interaction time.

Looking at groundwater research landscape of Jakarta Basin for better water management

NASA Astrophysics Data System (ADS)

Irawan, Dasapta Erwin; Priyambodho, Adhi; Novianti Rachmi, Cut; Maulana Wibowo, Dimas

2017-07-01

Based on our experience, defining the gap between what we know and what we don’t know is the hardest part in proposing water management strategy. Many techniques have been introduced to make this stage easier, and one of them is bibliometric analysis. The following paper is the second part of our bibliometric project in the search for a gap in the water resources research in Jakarta. This paper starts to analyse the visualisations that had been extracted from the previous paper based on our database. Using the keyword “groundwater Jakarta”, we managed to get 70 relevant papers. Several visualisations have been built using open source applications. Word cloud analysis shows that the trend to discuss groundwater in scientific sense had only been started in the early 2000’s. This is presumably due to the emerging regional autonomy in which forcing regions to understand their groundwater setting before creating a management strategy. More papers in the later time has been induced by more geo-hazards (land subsidence and floods) resulted in the vast groundwater pumping. More and more resources have been utilized to get more groundwater data. Water scientists by then understood that these hazards had been started long before the 2000’s. This had become the starting point of data era later on. The next era will be the era of water management. Hydrologists had been proposing integrated water management Jakarta and its nearby groundwater basins. Most of them have been strongly suggested to manage all water bodies, rainfall, surface water, and groundwater as one system. In the 2010’s we identify more papers are discussing in water quality following the vast discussion in water quantity in the previous era. People have been more aware the importance of quality in providing water system for the citizen. Then five years later, we believe that water researchers have also put their mind in the interactions between surface water and groundwater, especially in the riverbank, where most of the slums are located. Based on the results, we believe that more researches to understand interactions between groundwater and surface water would fill the gap to come up with better water management system in Jakarta.