Orbiter middeck/payload standard interfaces control document

NASA Technical Reports Server (NTRS)

1984-01-01

The interfaces which shall be provided by the baseline shuttle mid-deck for payload use within the mid-deck area are defined, as well as all constraints which shall be observed by all the users of the defined interfaces. Commonality was established with respect to analytical approaches, analytical models, technical data and definitions for integrated analyses by all the interfacing parties. Any payload interfaces that are out of scope with the standard interfaces defined shall be defined in a Payload Unique Interface Control Document (ICD) for a given payload. Each Payload Unique ICD will have comparable paragraphs to this ICD and will have a corresponding notation of A, for applicable; N/A, for not applicable; N, for note added for explanation; and E, for exception. On any flight, the STS reserves the right to assign locations to both payloads mounted on an adapter plate(s) and payloads stored within standard lockers. Specific locations requests and/or requirements exceeding standard mid-deck payload requirements may result in a reduction in manifesting opportunities.

Programs for transferring data between a relational data base and a finite element structural analysis program

NASA Technical Reports Server (NTRS)

Johnson, S. C.

1982-01-01

An interface system for passing data between a relational information management (RIM) data base complex and engineering analysis language (EAL), a finite element structural analysis program is documented. The interface system, implemented on a CDC Cyber computer, is composed of two FORTRAN programs called RIM2EAL and EAL2RIM. The RIM2EAL reads model definition data from RIM and creates a file of EAL commands to define the model. The EAL2RIM reads model definition and EAL generated analysis data from EAL's data library and stores these data dirctly in a RIM data base. These two interface programs and the format for the RIM data complex are described.

MASTRE trajectory code update to automate flight trajectory design, performance predictions, and vehicle sizing for support of shuttle and shuttle derived vehicles: Programmers manual

NASA Technical Reports Server (NTRS)

1993-01-01

The information required by a programmer using the Minimum Hamiltonian AScent Trajectory Evaluation (MASTRE) Program is provided. This document enables the programmer to either modify the program or convert the program to computers other than the VAX computer. Documentation for each subroutine or function based on providing the definitions of the variables and a source listing are included. Questions concerning the equations, techniques, or input requirements should be answered by either the Engineering or User's manuals. Three appendices are also included which provide a listing of the Root-Sum-Square (RSS) program, a listing of subroutine names and definitions used in the MASTRE User Friendly Interface Program, and listing of the subroutine names and definitions used in the Mass Properties Program. The RSS Program is used to aid in the performance of dispersion analyses. The RSS program reads a file generated by the MASTRE Program, calculates dispersion parameters, and generates output tables and output plot files. UFI Program provides a screen user interface to aid the user in providing input to the model. The Mass Properties Program defines the mass properties data for the MASTRE program through the use of user interface software.

Physiology of chimpanzees in orbit. Part 2: Interface document

NASA Technical Reports Server (NTRS)

Firstenberg, A.

1972-01-01

Interface requirements are presented for the design and development of an earth orbiting experiment to be known as POCO, Physiology of Chimpanzees in Orbit. The POCO experiment may be designed to operate within an orbiting space station (provided artificial gravity measures are not employed), a Saturn 4-B workshop, an Apollo command module or service module, a Saturn-1B spacecraft LM adapter, or aboard one of the presently conceived appendages connected by an umbilical to a space station. This document sets forth the experiment definition and requirements and describes the hardware under development to accomplish these objectives.

The Multimission Image Processing Laboratory's virtual frame buffer interface

NASA Technical Reports Server (NTRS)

Wolfe, T.

1984-01-01

Large image processing systems use multiple frame buffers with differing architectures and vendor supplied interfaces. This variety of architectures and interfaces creates software development, maintenance and portability problems for application programs. Several machine-dependent graphics standards such as ANSI Core and GKS are available, but none of them are adequate for image processing. Therefore, the Multimission Image Processing laboratory project has implemented a programmer level virtual frame buffer interface. This interface makes all frame buffers appear as a generic frame buffer with a specified set of characteristics. This document defines the virtual frame uffer interface and provides information such as FORTRAN subroutine definitions, frame buffer characteristics, sample programs, etc. It is intended to be used by application programmers and system programmers who are adding new frame buffers to a system.

Preliminary design of a solar central receiver for a site-specific repowering application (Saguaro Power Plant). Volume III. Specifications. Final report, October 1982-September 1983

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weber, E.R.

1983-09-01

This volume on specifications for the Saguaro Power Plant includes the following: subsystem interface definition document; solar collector subsystem specification; receiver specification; thermal energy storage specification; solar steam generator specification; and master control system specification.

Preliminary low-level waste feed definition guidance - LLW pretreatment interface

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shade, J.W.; Connor, J.M.; Hendrickson, D.W.

1995-02-01

The document describes limits for key constituents in the LLW feed, and the bases for these limits. The potential variability in the stream is then estimated and compared to the limits. Approaches for accomodating uncertainty in feed inventory, processing strategies, and process design (melter and disposal system) are discussed. Finally, regulatory constraints are briefly addressed.

The management approach to the NASA space station definition studies at the Manned Spacecraft Center

NASA Technical Reports Server (NTRS)

Heberlig, J. C.

1972-01-01

The overall management approach to the NASA Phase B definition studies for space stations, which were initiated in September 1969 and completed in July 1972, is reviewed with particular emphasis placed on the management approach used by the Manned Spacecraft Center. The internal working organizations of the Manned Spacecraft Center and its prime contractor, North American Rockwell, are delineated along with the interfacing techniques used for the joint Government and industry study. Working interfaces with other NASA centers, industry, and Government agencies are briefly highlighted. The controlling documentation for the study (such as guidelines and constraints, bibliography, and key personnel) is reviewed. The historical background and content of the experiment program prepared for use in this Phase B study are outlined and management concepts that may be considered for future programs are proposed.

Sikorsky interactive graphics surface design/manufacturing system

NASA Technical Reports Server (NTRS)

Robbins, R.

1975-01-01

An interactive graphics system conceived to be used in the design, analysis, and manufacturing of aircraft components with free form surfaces was described. In addition to the basic surface definition and viewing capabilities inherent in such a system, numerous other features are present: surface editing, automated smoothing of control curves, variable milling patch boundary definitions, surface intersection definition and viewing, automatic creation of true offset surfaces, digitizer and drafting machine interfaces, and cutter path optimization. Documented costs and time savings of better than six to one are being realized with this system. The system was written in FORTRAN and GSP for use on IBM 2250 CRT's in conjunction with an IBM 370/158 computer.

Final definition and preliminary design study for the initial atmospheric cloud physics laboratory, a Spacelab mission payload

NASA Technical Reports Server (NTRS)

1976-01-01

The following areas related to the final definition and preliminary design study of the initial atmospheric cloud physics laboratory (ACPL) were covered: (1) proposal organization, personnel, schedule, and project management, (2) proposed configurations, (3) study objectives, (4) ACPL experiment program listing and description, (5) mission/flight flexibility and modularity/commonality, (6) study plan, and (7) description of following tasks: requirement analysis and definition task flow, systems analysis and trade studies, subsystem analysis and trade studies, specifications and interface control documents, preliminary design task flow, work breakdown structure, programmatic analysis and planning, and project costs. Finally, an overview of the scientific requirements was presented.

A generic, web-based clinical information system architecture using HL7 CDA: successful implementation in dermatological routine care.

PubMed

Schuler, Thilo; Boeker, Martin; Klar, Rüdiger; Müller, Marcel

2007-01-01

The requirements of highly specialized clinical domains are often underrepresented in hospital information systems (HIS). Common consequences are that documentation remains to be paper-based or external systems with insufficient HIS integration are used. This paper presents a solution to overcome this deficiency in the form of a generic framework based on the HL7 Clinical Document Architecture. The central architectural idea is the definition of customized forms using a schema-controlled XML language. These flexible form definitions drive the user interface, the data storage, and standardized data exchange. A successful proof-of-concept application in a dermatologic outpatient wound care department has been implemented, and is well accepted by the clinicians. Our work with HL7 CDA revealed the need for further practical research in the health information standards realm.

Design requirements and development of an airborne descent path definition algorithm for time navigation

NASA Technical Reports Server (NTRS)

Izumi, K. H.; Thompson, J. L.; Groce, J. L.; Schwab, R. W.

1986-01-01

The design requirements for a 4D path definition algorithm are described. These requirements were developed for the NASA ATOPS as an extension of the Local Flow Management/Profile Descent algorithm. They specify the processing flow, functional and data architectures, and system input requirements, and recommended the addition of a broad path revision (reinitialization) function capability. The document also summarizes algorithm design enhancements and the implementation status of the algorithm on an in-house PDP-11/70 computer. Finally, the requirements for the pilot-computer interfaces, the lateral path processor, and guidance and steering function are described.

Step 1: Human System Integration (HSI) FY05 Pilot-Technology Interface Requirements for Contingency Management

NASA Technical Reports Server (NTRS)

2005-01-01

This document involves definition of technology interface requirements for Contingency Management. This was performed through a review of Contingency Management-related, HSI requirements documents, standards, and recommended practices. Technology concepts in use by the Contingency Management Work Package were considered. Beginning with HSI high-level functional requirements for Contingency Management, and Contingency Management technology elements, HSI requirements for the interface to the pilot were identified. Results of the analysis describe (1) the information required by the pilot to have knowledge of system failures and associated contingency procedures, and (2) the control capability needed by the pilot to obtain system status and procedure information. Fundamentally, these requirements provide the candidate Contingency Management technology concepts with the necessary human-related elements to make them compatible with human capabilities and limitations. The results of the analysis describe how Contingency Management operations and functions should interface with the pilot to provide the necessary Contingency Management functionality to the UA-pilot system. Requirements and guidelines for Contingency Management are partitioned into four categories: (1) Health and Status and (2) Contingency Management. Each requirement is stated and is supported with a rationale and associated reference(s).

Step 1:Human System Integration (HSI) FY05 Pilot-Technology Interface Requirements for Collision Avoidance

NASA Technical Reports Server (NTRS)

2007-01-01

This document provides definition of technology human interface requirements for Collision Avoidance (CA). This was performed through a review of CA-related, HSI requirements documents, standards, and recommended practices. Technology concepts in use by the Access 5 CA work package were considered... Beginning with the HSI high-level functional requirement for CA, and CA technology elements, HSI requirements for the interface to the pilot were identified. Results of the analysis describe (1) the information required by the pilot to have knowledge CA system status, and (2) the control capability needed by the pilot to obtain CA information and affect an avoidance maneuver. Fundamentally, these requirements provide the candidate CA technology concepts with the necessary human-related elements to make them compatible with human capabilities and limitations. The results of the analysis describe how CA operations and functions should interface with the pilot to provide the necessary CA functionality to the UA-pilot system .Requirements and guidelines for CA are partitioned into four categories: (1) General, (2) Alerting, (3) Guidance, and (4) Cockpit Display of Traffic Information. Each requirement is stated and is supported with a rationale and associated reference(s).

Towards the formal verification of the requirements and design of a processor interface unit

NASA Technical Reports Server (NTRS)

Fura, David A.; Windley, Phillip J.; Cohen, Gerald C.

1993-01-01

The formal verification of the design and partial requirements for a Processor Interface Unit (PIU) using the Higher Order Logic (HOL) theorem-proving system is described. The processor interface unit is a single-chip subsystem within a fault-tolerant embedded system under development within the Boeing Defense and Space Group. It provides the opportunity to investigate the specification and verification of a real-world subsystem within a commercially-developed fault-tolerant computer. An overview of the PIU verification effort is given. The actual HOL listing from the verification effort are documented in a companion NASA contractor report entitled 'Towards the Formal Verification of the Requirements and Design of a Processor Interface Unit - HOL Listings' including the general-purpose HOL theories and definitions that support the PIU verification as well as tactics used in the proofs.

Space Flight Human System Standards (SFHSS). Volume 2; Human Factors, Habitability and Environmental Factors" and Human Integration Design Handbook (HIDH)

NASA Technical Reports Server (NTRS)

Davis, Jeffrey R.; Fitts, David J.

2009-01-01

This viewgraph presentation reviews the standards for space flight hardware based on human capabilities and limitations. The contents include: 1) Scope; 2) Applicable documents; 3) General; 4) Human Physical Characteristics and Capabilities; 5) Human Performance and Cognition; 6) Natural and Induced Environments; 7) Habitability Functions; 8) Architecture; 9) Hardware and Equipment; 10) Crew Interfaces; 11) Spacesuits; 12) Operatons: Reserved; 13) Ground Maintenance and Assembly: Reserved; 14) Appendix A-Reference Documents; 15) Appendix N-Acronyms and 16) Appendix C-Definition. Volume 2 is supported by the Human Integration Design Handbook (HIDH)s.

MPI-IO: A Parallel File I/O Interface for MPI Version 0.3

NASA Technical Reports Server (NTRS)

Corbett, Peter; Feitelson, Dror; Hsu, Yarsun; Prost, Jean-Pierre; Snir, Marc; Fineberg, Sam; Nitzberg, Bill; Traversat, Bernard; Wong, Parkson

1995-01-01

Thanks to MPI [9], writing portable message passing parallel programs is almost a reality. One of the remaining problems is file I/0. Although parallel file systems support similar interfaces, the lack of a standard makes developing a truly portable program impossible. Further, the closest thing to a standard, the UNIX file interface, is ill-suited to parallel computing. Working together, IBM Research and NASA Ames have drafted MPI-I0, a proposal to address the portable parallel I/0 problem. In a nutshell, this proposal is based on the idea that I/0 can be modeled as message passing: writing to a file is like sending a message, and reading from a file is like receiving a message. MPI-IO intends to leverage the relatively wide acceptance of the MPI interface in order to create a similar I/0 interface. The above approach can be materialized in different ways. The current proposal represents the result of extensive discussions (and arguments), but is by no means finished. Many changes can be expected as additional participants join the effort to define an interface for portable I/0. This document is organized as follows. The remainder of this section includes a discussion of some issues that have shaped the style of the interface. Section 2 presents an overview of MPI-IO as it is currently defined. It specifies what the interface currently supports and states what would need to be added to the current proposal to make the interface more complete and robust. The next seven sections contain the interface definition itself. Section 3 presents definitions and conventions. Section 4 contains functions for file control, most notably open. Section 5 includes functions for independent I/O, both blocking and nonblocking. Section 6 includes functions for collective I/O, both blocking and nonblocking. Section 7 presents functions to support system-maintained file pointers, and shared file pointers. Section 8 presents constructors that can be used to define useful filetypes (the role of filetypes is explained in Section 2 below). Section 9 presents how the error handling mechanism of MPI is supported by the MPI-IO interface. All this is followed by a set of appendices, which contain information about issues that have not been totally resolved yet, and about design considerations. The reader can find there the motivation behind some of our design choices. More information on this would definitely be welcome and will be included in a further release of this document. The first appendix contains a description of MPI-I0's 'hints' structure which is used when opening a file. Appendix B is a discussion of various issues in the support for file pointers. Appendix C explains what we mean in talking about atomic access. Appendix D provides detailed examples of filetype constructors, and Appendix E contains a collection of arguments for and against various design decisions.

The development of a program analysis environment for Ada

NASA Technical Reports Server (NTRS)

Brown, David B.; Carlisle, Homer W.; Chang, Kai-Hsiung; Cross, James H.; Deason, William H.; Haga, Kevin D.; Huggins, John R.; Keleher, William R. A.; Starke, Benjamin B.; Weyrich, Orville R.

1989-01-01

A unit level, Ada software module testing system, called Query Utility Environment for Software Testing of Ada (QUEST/Ada), is described. The project calls for the design and development of a prototype system. QUEST/Ada design began with a definition of the overall system structure and a description of component dependencies. The project team was divided into three groups to resolve the preliminary designs of the parser/scanner: the test data generator, and the test coverage analyzer. The Phase 1 report is a working document from which the system documentation will evolve. It provides history, a guide to report sections, a literature review, the definition of the system structure and high level interfaces, descriptions of the prototype scope, the three major components, and the plan for the remainder of the project. The appendices include specifications, statistics, two papers derived from the current research, a preliminary users' manual, and the proposal and work plan for Phase 2.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, N.; Ye, Z.

This report documents part of a multiyear research program dedicated to the development of requirements to support the definition, design, and demonstration of a distributed generation-electric power system interconnection interface concept. The report focuses on the dynamic behavior of power systems when a significant portion of the total energy resource is distributed generation. It also focuses on the near-term reality that the majority of new DG relies on rotating synchronous generators for energy conversion.

Particle Engulfment and Pushing by Solidifying Interfaces (PEPSI)

NASA Technical Reports Server (NTRS)

Stefanescu, Doru Michael; Curreri, Peter A.; Juretsko, F.; Pang, H.; Phalnikar, R.

1993-01-01

The preliminary definition phase included the following actions: producing a science requiring document (draft), producing a science requirements document (preliminary), updating the flight program proposal, project review at NASA Marshall Space Flight Center, and research work as defined in the statement of work. The first three items of this plan have been delivered by the University of Alabama to NASA according to schedule. A project review meeting was held at MSFC on June 29, 1993. Consequently, this part of the report will address the results of the research work performed in the Solidification Laboratory at the University of Alabama during the first six months of the project.

Phase 111A Crew Interface Specifications Development for Inflight Maintenance and Stowage Functions

NASA Technical Reports Server (NTRS)

Carl, John G.

1973-01-01

This report presents the findings and data products developed during the Phase IIIA Crew Interface Specification Study for Inflight Maintenance and Stowage Functions, performed by General Electric for the NASA, Johnson Space Center with a set of documentation that can be used as definitive guidelines to improve the present process of defining, controlling and managing flight crew interface requirements that are related to inflight maintenance (including assembly and servicing) and stowage functions. During the Phase IIIA contract period, the following data products were developed: 1) Projected NASA Crew Procedures/Flight Data File Development Process. 2) Inflight Maintenance Management Process Description. 3) Preliminary Draft, General Specification, Inflight Maintenance Management Requirements. 4) Inflight Maintenance Operational Process Description. 5) Preliminary Draft, General Specification, Inflight Maintenance Task and Support Requirements Analysis. 6) Suggested IFM Data Processing Reports for Logistics Management The above Inflight Maintenance data products have been developed during the Phase IIIA study after review of Space Shuttle Program Documentation, including the Level II Integrated Logistics Requirements and other DOD and NASA data relative to Payloads Accommodations and Satellite On-Orbit Servicing. These Inflight Maintenance data products were developed to be in consonance with Space Shuttle Program technical and management requirements.

In Defense of Defining Science Education as the Science/Society Interface.

ERIC Educational Resources Information Center

Yager, Robert E.

1985-01-01

Defends the definition of science education as the interface of science and society, pointing out the fallacies of an alternative definition promulgated by Good, Herron, Lawson, and Renner who, in a previous article (SE 537 615) examined and rejected the science/society interface definition in favor of their own definition. (DH)

User systems guidelines for software projects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abrahamson, L.

1986-04-01

This manual presents guidelines for software standards which were developed so that software project-development teams and management involved in approving the software could have a generalized view of all phases in the software production procedure and the steps involved in completing each phase. Guidelines are presented for six phases of software development: project definition, building a user interface, designing software, writing code, testing code, and preparing software documentation. The discussions for each phase include examples illustrating the recommended guidelines. 45 refs. (DWL)

Text Exchange System

NASA Technical Reports Server (NTRS)

Snyder, W. V.; Hanson, R. J.

1986-01-01

Text Exchange System (TES) exchanges and maintains organized textual information including source code, documentation, data, and listings. System consists of two computer programs and definition of format for information storage. Comprehensive program used to create, read, and maintain TES files. TES developed to meet three goals: First, easy and efficient exchange of programs and other textual data between similar and dissimilar computer systems via magnetic tape. Second, provide transportable management system for textual information. Third, provide common user interface, over wide variety of computing systems, for all activities associated with text exchange.

User-Friendly Interface Developed for a Web-Based Service for SpaceCAL Emulations

NASA Technical Reports Server (NTRS)

Liszka, Kathy J.; Holtz, Allen P.

2004-01-01

A team at the NASA Glenn Research Center is developing a Space Communications Architecture Laboratory (SpaceCAL) for protocol development activities for coordinated satellite missions. SpaceCAL will provide a multiuser, distributed system to emulate space-based Internet architectures, backbone networks, formation clusters, and constellations. As part of a new effort in 2003, building blocks are being defined for an open distributed system to make the satellite emulation test bed accessible through an Internet connection. The first step in creating a Web-based service to control the emulation remotely is providing a user-friendly interface for encoding the data into a well-formed and complete Extensible Markup Language (XML) document. XML provides coding that allows data to be transferred between dissimilar systems. Scenario specifications include control parameters, network routes, interface bandwidths, delay, and bit error rate. Specifications for all satellite, instruments, and ground stations in a given scenario are also included in the XML document. For the SpaceCAL emulation, the XML document can be created using XForms, a Webbased forms language for data collection. Contrary to older forms technology, the interactive user interface makes the science prevalent, not the data representation. Required versus optional input fields, default values, automatic calculations, data validation, and reuse will help researchers quickly and accurately define missions. XForms can apply any XML schema defined for the test mission to validate data before forwarding it to the emulation facility. New instrument definitions, facilities, and mission types can be added to the existing schema. The first prototype user interface incorporates components for interactive input and form processing. Internet address, data rate, and the location of the facility are implemented with basic form controls with default values provided for convenience and efficiency using basic XForms operations. Because different emulation scenarios will vary widely in their component structure, more complex operations are used to add and delete facilities.

40 CFR 80.84 - Treatment of interface and transmix.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 16 2011-07-01 2011-07-01 false Treatment of interface and transmix... interface and transmix. (a) Definitions. For purposes of this section, the following definitions apply: (1) Interface means a volume of petroleum product generated in a pipeline between two adjacent volumes of non...

Orbital Spacecraft Consumables Resupply System (OSCRS): Monopropellant application to space station and OMV automatic refueling impacts of an ELV launch, volume 4

NASA Technical Reports Server (NTRS)

1987-01-01

The use of orbital spacecraft consumables resupply system (OSCRS) at the Space Station is investigated, its use with the orbital maneuvering vehicle, and launch of the OSCRS on an expendable launch vehicles. A system requirements evaluation was performed initially to identify any unique requirements that would impact the design of OSCRS when used at the Space Station. Space Station documents were reviewed to establish requirements and to identify interfaces between the OSCRS, Shuttle, and Space Station, especially the Servicing Facility. The interfaces between OSCRS and the Shuttle consists of an avionics interface for command and control and a structural interface for launch support and for grappling with the Shuttle Remote Manipulator System. For use of the OSCRS at the Space Station, three configurations were evaluated using the results of the interface definition to increase the efficiency of OSCRS and to decrease the launch weight by Station-basing specific OSCRS subsystems. A modular OSCRS was developed in which the major subsystems were Station-based where possible. The configuration of an OSCRS was defined for transport of water to the Space Station.

Oak Ridge Environmental Information System (OREIS) functional system design document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Birchfield, T.E.; Brown, M.O.; Coleman, P.R.

1994-03-01

The OREIS Functional System Design document provides a detailed functional description of the Oak Ridge Environmental Information System (OREIS). It expands the system requirements defined in the OREIS Phase 1-System Definition Document (ES/ER/TM-34). Documentation of OREIS development is based on the Automated Data Processing System Development Methodology, a Martin Marietta Energy Systems, Inc., procedure written to assist in developing scientific and technical computer systems. This document focuses on the development of the functional design of the user interface, which includes the integration of commercial applications software. The data model and data dictionary are summarized briefly; however, the Data Management Planmore » for OREIS (ES/ER/TM-39), a companion document to the Functional System Design document, provides the complete data dictionary and detailed descriptions of the requirements for the data base structure. The OREIS system will provide the following functions, which are executed from a Menu Manager: (1) preferences, (2) view manager, (3) macro manager, (4) data analysis (assisted analysis and unassisted analysis), and (5) spatial analysis/map generation (assisted ARC/INFO and unassisted ARC/INFO). Additional functionality includes interprocess communications, which handle background operations of OREIS.« less

Modeling Techniques for High Dependability Protocols and Architecture

NASA Technical Reports Server (NTRS)

LaValley, Brian; Ellis, Peter; Walter, Chris J.

2012-01-01

This report documents an investigation into modeling high dependability protocols and some specific challenges that were identified as a result of the experiments. The need for an approach was established and foundational concepts proposed for modeling different layers of a complex protocol and capturing the compositional properties that provide high dependability services for a system architecture. The approach centers around the definition of an architecture layer, its interfaces for composability with other layers and its bindings to a platform specific architecture model that implements the protocols required for the layer.

Multidisciplinary Analysis and Optimization Generation 1 and Next Steps

NASA Technical Reports Server (NTRS)

Naiman, Cynthia Gutierrez

2008-01-01

The Multidisciplinary Analysis & Optimization Working Group (MDAO WG) of the Systems Analysis Design & Optimization (SAD&O) discipline in the Fundamental Aeronautics Program s Subsonic Fixed Wing (SFW) project completed three major milestones during Fiscal Year (FY)08: "Requirements Definition" Milestone (1/31/08); "GEN 1 Integrated Multi-disciplinary Toolset" (Annual Performance Goal) (6/30/08); and "Define Architecture & Interfaces for Next Generation Open Source MDAO Framework" Milestone (9/30/08). Details of all three milestones are explained including documentation available, potential partner collaborations, and next steps in FY09.

Atmosphere explorer missions C, D, and E. Spacecraft experiment interface definition study

NASA Technical Reports Server (NTRS)

1972-01-01

The Atmosphere Explorer Missions C, D, & E Spacecraft/Experiment Interface Definition Study is discussed. The objectives of the study included an analysis of the accommodation requirements of the experiments for the three missions, an assessment of the overall effect of these requirements on the spacecraft system design and performance, and the detailed definition of all experiment/spacecraft electrical, mechanical, and environmental interfaces. In addition, the study included the identification and definition of system characteristics required to ensure compatibility with the consolidated STADAN and MSFN communications networks.

International Docking Standard (IDSS) Interface Definition Document (IDD) . E; Revision

NASA Technical Reports Server (NTRS)

Kelly, Sean M.; Cryan, Scott P.

2016-01-01

This International Docking System Standard (IDSS) Interface Definition Document (IDD) is the result of a collaboration by the International Space Station membership to establish a standard docking interface to enable on-orbit crew rescue operations and joint collaborative endeavors utilizing different spacecraft. This IDSS IDD details the physical geometric mating interface and design loads requirements. The physical geometric interface requirements must be strictly followed to ensure physical spacecraft mating compatibility. This includes both defined components and areas that are void of components. The IDD also identifies common design parameters as identified in section 3.0, e.g., docking initial conditions and vehicle mass properties. This information represents a recommended set of design values enveloping a broad set of design reference missions and conditions, which if accommodated in the docking system design, increases the probability of successful docking between different spacecraft. This IDD does not address operational procedures or off-nominal situations, nor does it dictate implementation or design features behind the mating interface. It is the responsibility of the spacecraft developer to perform all hardware verification and validation, and to perform final docking analyses to ensure the needed docking performance and to develop the final certification loads for their application. While there are many other critical requirements needed in the development of a docking system such as fault tolerance, reliability, and environments (e.g. vibration, etc.), it is not the intent of the IDSS IDD to mandate all of these requirements; these requirements must be addressed as part of the specific developer's unique program, spacecraft and mission needs. This approach allows designers the flexibility to design and build docking mechanisms to their unique program needs and requirements. The purpose of the IDSS IDD is to provide basic common design parameters to allow developers to independently design compatible docking systems. The IDSS is intended for uses ranging from crewed to autonomous space vehicles, and from Low Earth Orbit (LEO) to deep-space exploration missions.The purpose of the IDSS IDD is to provide basic common design parameters to allow developers to independently design compatible docking systems. The IDSS is intended for uses ranging from crewed to autonomous space vehicles, and from Low Earth Orbit (LEO) to deep-space exploration missions. The purpose of the IDSS IDD is to provide basic common design parameters to allow developers to independently design compatible docking systems. The IDSS is intended for uses ranging from crewed to autonomous space vehicles, and from Low Earth Orbit (LEO) to deep-space exploration missions.

Computer-Aided Engineering Of Cabling

NASA Technical Reports Server (NTRS)

Billitti, Joseph W.

1989-01-01

Program generates data sheets, drawings, and other information on electrical connections. DFACS program, centered around single data base, has built-in menus providing easy input of, and access to, data for all personnel involved in system, subsystem, and cabling. Enables parallel design of circuit-data sheets and drawings of harnesses. Also recombines raw information to generate automatically various project documents and drawings, including index of circuit-data sheets, list of electrical-interface circuits, lists of assemblies and equipment, cabling trees, and drawings of cabling electrical interfaces and harnesses. Purpose of program to provide engineering community with centralized data base for putting in, and gaining access to, functional definition of system as specified in terms of details of pin connections of end circuits of subsystems and instruments and data on harnessing. Primary objective to provide instantaneous single point of interchange of information, thus avoiding

Component Technology for High-Performance Scientific Simulation Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Epperly, T; Kohn, S; Kumfert, G

2000-11-09

We are developing scientific software component technology to manage the complexity of modem, parallel simulation software and increase the interoperability and re-use of scientific software packages. In this paper, we describe a language interoperability tool named Babel that enables the creation and distribution of language-independent software libraries using interface definition language (IDL) techniques. We have created a scientific IDL that focuses on the unique interface description needs of scientific codes, such as complex numbers, dense multidimensional arrays, complicated data types, and parallelism. Preliminary results indicate that in addition to language interoperability, this approach provides useful tools for thinking about themore » design of modem object-oriented scientific software libraries. Finally, we also describe a web-based component repository called Alexandria that facilitates the distribution, documentation, and re-use of scientific components and libraries.« less

Interface for the documentation and compilation of a library of computer models in physiology.

PubMed Central

Summers, R. L.; Montani, J. P.

1994-01-01

A software interface for the documentation and compilation of a library of computer models in physiology was developed. The interface is an interactive program built within a word processing template in order to provide ease and flexibility of documentation. A model editor within the interface directs the model builder as to standardized requirements for incorporating models into the library and provides the user with an index to the levels of documentation. The interface and accompanying library are intended to facilitate model development, preservation and distribution and will be available for public use. PMID:7950046

A database for TMT interface control documents

NASA Astrophysics Data System (ADS)

Gillies, Kim; Roberts, Scott; Brighton, Allan; Rogers, John

2016-08-01

The TMT Software System consists of software components that interact with one another through a software infrastructure called TMT Common Software (CSW). CSW consists of software services and library code that is used by developers to create the subsystems and components that participate in the software system. CSW also defines the types of components that can be constructed and their roles. The use of common component types and shared middleware services allows standardized software interfaces for the components. A software system called the TMT Interface Database System was constructed to support the documentation of the interfaces for components based on CSW. The programmer describes a subsystem and each of its components using JSON-style text files. A command interface file describes each command a component can receive and any commands a component sends. The event interface files describe status, alarms, and events a component publishes and status and events subscribed to by a component. A web application was created to provide a user interface for the required features. Files are ingested into the software system's database. The user interface allows browsing subsystem interfaces, publishing versions of subsystem interfaces, and constructing and publishing interface control documents that consist of the intersection of two subsystem interfaces. All published subsystem interfaces and interface control documents are versioned for configuration control and follow the standard TMT change control processes. Subsystem interfaces and interface control documents can be visualized in the browser or exported as PDF files.

Comparing two anesthesia information management system user interfaces: a usability evaluation.

PubMed

Wanderer, Jonathan P; Rao, Anoop V; Rothwell, Sarah H; Ehrenfeld, Jesse M

2012-11-01

Anesthesia information management systems (AIMS) have been developed by multiple vendors and are deployed in thousands of operating rooms around the world, yet not much is known about measuring and improving AIMS usability. We developed a methodology for evaluating AIMS usability in a low-fidelity simulated clinical environment and used it to compare an existing user interface with a revised version. We hypothesized that the revised user interface would be more useable. In a low-fidelity simulated clinical environment, twenty anesthesia providers documented essential anesthetic information for the start of the case using both an existing and a revised user interface. Participants had not used the revised user interface previously and completed a brief training exercise prior to the study task. All participants completed a workload assessment and a satisfaction survey. All sessions were recorded. Multiple usability metrics were measured. The primary outcome was documentation accuracy. Secondary outcomes were perceived workload, number of documentation steps, number of user interactions, and documentation time. The interfaces were compared and design problems were identified by analyzing recorded sessions and survey results. Use of the revised user interface was shown to improve documentation accuracy from 85.1% to 92.4%, a difference of 7.3% (95% confidence interval [CI] for the difference 1.8 to 12.7). The revised user interface decreased the number of user interactions by 6.5 for intravenous documentation (95% CI 2.9 to 10.1) and by 16.1 for airway documentation (95% CI 11.1 to 21.1). The revised user interface required 3.8 fewer documentation steps (95% CI 2.3 to 5.4). Airway documentation time was reduced by 30.5 seconds with the revised workflow (95% CI 8.5 to 52.4). There were no significant time differences noted in intravenous documentation or in total task time. No difference in perceived workload was found between the user interfaces. Two user interface design problems were identified in the revised user interface. The usability of anesthesia information management systems can be evaluated using a low-fidelity simulated clinical environment. User testing of the revised user interface showed improvement in some usability metrics and highlighted areas for further revision. Vendors of AIMS and those who use them should consider adopting methods to evaluate and improve AIMS usability.

19 CFR 143.32 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... definitions for purposes of subparts D and E of this part: (a) ABI. “ABI” means the Automated Broker Interface... acquisition, processing and distribution of import data. (c) AII. “AII” means Automated Invoice Interface and..., respectively, in accordance with the CATAIR (CBP Publication 552, Customs and Trade Automated Interface...

CAPRI: A Geometric Foundation for Computational Analysis and Design

NASA Technical Reports Server (NTRS)

Haimes, Robert

2006-01-01

CAPRI is a software building tool-kit that refers to two ideas; (1) A simplified, object-oriented, hierarchical view of a solid part integrating both geometry and topology definitions, and (2) programming access to this part or assembly and any attached data. A complete definition of the geometry and application programming interface can be found in the document CAPRI: Computational Analysis PRogramming Interface appended to this report. In summary the interface is subdivided into the following functional components: 1. Utility routines -- These routines include the initialization of CAPRI, loading CAD parts and querying the operational status as well as closing the system down. 2. Geometry data-base queries -- This group of functions allow all top level applications to figure out and get detailed information on any geometric component in the Volume definition. 3. Point queries -- These calls allow grid generators, or solvers doing node adaptation, to snap points directly onto geometric entities. 4. Calculated or geometrically derived queries -- These entry points calculate data from the geometry to aid in grid generation. 5. Boundary data routines -- This part of CAPRI allows general data to be attached to Boundaries so that the boundary conditions can be specified and stored within CAPRI s data-base. 6. Tag based routines -- This part of the API allows the specification of properties associated with either the Volume (material properties) or Boundary (surface properties) entities. 7. Geometry based interpolation routines -- This part of the API facilitates Multi-disciplinary coupling and allows zooming through Boundary Attachments. 8. Geometric creation and manipulation -- These calls facilitate constructing simple solid entities and perform the Boolean solid operations. Geometry constructed in this manner has the advantage that if the data is kept consistent with the CAD package, therefore a new design can be incorporated directly and is manufacturable. 9. Master Model access This addition to the API allows for the querying of the parameters and dimensions of the model. The feature tree is also exposed so it is easy to see where the parameters are applied. Calls exist to allow for the modification of the parameters and the suppression/unsuppression of nodes in the tree. Part regeneration is performed by a single API call and a new part becomes available within CAPRI (if the regeneration was successful). This is described in a separate document. Components 1-7 are considered the CAPRI base level reader.

HAL/SM system functional design specification. [systems analysis and design analysis of central processing units

NASA Technical Reports Server (NTRS)

Ross, C.; Williams, G. P. W., Jr.

1975-01-01

The functional design of a preprocessor, and subsystems is described. A structure chart and a data flow diagram are included for each subsystem. Also a group of intermodule interface definitions (one definition per module) is included immediately following the structure chart and data flow for a particular subsystem. Each of these intermodule interface definitions consists of the identification of the module, the function the module is to perform, the identification and definition of parameter interfaces to the module, and any design notes associated with the module. Also described are compilers and computer libraries.

A Tailored Concept of Operations for NASA LSP Integrated Operations

NASA Technical Reports Server (NTRS)

Owens, Clark V.

2016-01-01

An integral part of the Systems Engineering process is the creation of a Concept of Operations (ConOps) for a given system, with the ConOps initially established early in the system design process and evolved as the system definition and design matures. As Integration Engineers in NASA's Launch Services Program (LSP) at Kennedy Space Center (KSC), our job is to manage the interface requirements for all the robotic space missions that come to our Program for a Launch Service. LSP procures and manages a launch service from one of our many commercial Launch Vehicle Contractors (LVCs) and these commercial companies are then responsible for developing the Interface Control Document (ICD), the verification of the requirements in that document, and all the services pertaining to integrating the spacecraft and launching it into orbit. However, one of the systems engineering tools that have not been employed within LSP to date is a Concept of Operations. The goal of this project is to research the format and content that goes into these various aerospace industry ConOps and tailor the format and content into template form, so the template may be used as an engineering tool for spacecraft integration with future LSP procured launch services.

A Human Factors Perspective on Alarm System Research and Development 2000 to 2010

DOE Office of Scientific and Technical Information (OSTI.GOV)

Curt Braun; John Grimes; Eric Shaver

By definition, alarms serve to notify human operators of out-of-parameter conditions that could threaten equipment, the environment, product quality and, of course, human life. Given the complexities of industrial systems, human machine interfaces, and the human operator, the understanding of how alarms and humans can best work together to prevent disaster is continually developing. This review examines advances in alarm research and development from 2000 to 2010 and includes the writings of trade professionals, engineering and human factors researchers, and standards organizations with the goal of documenting advances in alarms system design, research, and implementation.

Analytical study of electrical disconnect system for use on manned and unmanned missions

NASA Technical Reports Server (NTRS)

Rosener, A. A.; Lenda, J. A.; Trummer, R. O.

1976-01-01

The objective of this contract is to establish an optimum electrical disconnect system design(s) for use on manned and unmanned missions. The purpose of the disconnect system is to electrically mate and demate the spacecraft to subsystem module interfaces to accomplish orbital operations. The results of Task 1 and Task 2 of the effort are presented. Task 1 involves the definition of the functional, operational, and environmental requirements for the connector system to support the leading prototype candidate concepts. Task 2 involves the documentation review and survey of available existing connector designs.

Step 1: Human System Integration Pilot-Technology Interface Requirements for Weather Management

NASA Technical Reports Server (NTRS)

2005-01-01

This document involves definition of technology interface requirements for Hazardous Weather Avoidance. Technology concepts in use by the Access 5 Weather Management Work Package were considered. Beginning with the Human System Integration (HIS) high-level functional requirement for Hazardous Weather Avoidance, and Hazardous Weather Avoidance technology elements, HSI requirements for the interface to the pilot were identified. Results of the analysis describe (1) the information required by the pilot to have knowledge of hazardous weather, and (2) the control capability needed by the pilot to obtain hazardous weather information. Fundamentally, these requirements provide the candidate Hazardous Weather Avoidance technology concepts with the necessary human-related elements to make them compatible with human capabilities and limitations. The results of the analysis describe how Hazardous Weather Avoidance operations and functions should interface with the pilot to provide the necessary Weather Management functionality to the UA-pilot system. Requirements and guidelines for Hazardous Weather Avoidance are partitioned into four categories: (1) Planning En Route (2) Encountering Hazardous Weather En Route, (3) Planning to Destination, and (4) Diversion Planning Alternate Airport. Each requirement is stated and is supported with a rationale and associated reference(s).

Media independent interface. Interface control document

NASA Technical Reports Server (NTRS)

1987-01-01

A Media Independent Interface (MII) is specified, using current standards in the industry. The MII is described in hierarchical fashion. At the base are IEEE/International Standards Organization (ISO) documents (standards) which describe the functionality of the software modules or layers and their interconnection. These documents describe primitives which are to transcent the MII. The intent of the MII is to provide a universal interface to one or more Media Access Contols (MACs) for the Logical Link Controller and Station Manager. This interface includes both a standardized electrical and mechanical interface and a standardized functional specification which defines the services expected from the MAC.

Validation of Framework Code Approach to a Life Prediction System for Fiber Reinforced Composites

NASA Technical Reports Server (NTRS)

Gravett, Phillip

1997-01-01

The grant was conducted by the MMC Life Prediction Cooperative, an industry/government collaborative team, Ohio Aerospace Institute (OAI) acted as the prime contractor on behalf of the Cooperative for this grant effort. See Figure I for the organization and responsibilities of team members. The technical effort was conducted during the period August 7, 1995 to June 30, 1996 in cooperation with Erwin Zaretsky, the LERC Program Monitor. Phil Gravett of Pratt & Whitney was the principal technical investigator. Table I documents all meeting-related coordination memos during this period. The effort under this grant was closely coordinated with an existing USAF sponsored program focused on putting into practice a life prediction system for turbine engine components made of metal matrix composites (MMC). The overall architecture of the NMC life prediction system was defined in the USAF sponsored program (prior to this grant). The efforts of this grant were focussed on implementing and tailoring of the life prediction system, the framework code within it and the damage modules within it to meet the specific requirements of the Cooperative. T'he tailoring of the life prediction system provides the basis for pervasive and continued use of this capability by the industry/government cooperative. The outputs of this grant are: 1. Definition of the framework code to analysis modules interfaces, 2. Definition of the interface between the materials database and the finite element model, and 3. Definition of the integration of the framework code into an FEM design tool.

76 FR 8353 - Positioning Systems Directorate Will Be Hosting an Interface Control Working Group (ICWG) Meeting...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-14

... an Interface Control Working Group (ICWG) Meeting for Document ICD-GPS-870 AGENCY: Interface Control Working Group (ICWG) meeting for document ICD-GPS-870. ACTION: Meeting Notice. SUMMARY: This notice... Working Group (ICWG) meeting for document ICD-GPS-870, Navstar Next Generation GPS Operational Control...

Radiation budget measurement/model interface

NASA Technical Reports Server (NTRS)

Vonderhaar, T. H.; Ciesielski, P.; Randel, D.; Stevens, D.

1983-01-01

This final report includes research results from the period February, 1981 through November, 1982. Two new results combine to form the final portion of this work. They are the work by Hanna (1982) and Stevens to successfully test and demonstrate a low-order spectral climate model and the work by Ciesielski et al. (1983) to combine and test the new radiation budget results from NIMBUS-7 with earlier satellite measurements. Together, the two related activities set the stage for future research on radiation budget measurement/model interfacing. Such combination of results will lead to new applications of satellite data to climate problems. The objectives of this research under the present contract are therefore satisfied. Additional research reported herein includes the compilation and documentation of the radiation budget data set a Colorado State University and the definition of climate-related experiments suggested after lengthy analysis of the satellite radiation budget experiments.

User’s Manual for the National Water Information System of the U.S. Geological Survey: Aggregate Water-Use Data System, Version 3.2

USGS Publications Warehouse

Nawyn, John P.; Sargent, B. Pierre; Hoopes, Barbara; Augenstein, Todd; Rowland, Kathleen M.; Barber, Nancy L.

2017-10-06

The Aggregate Water-Use Data System (AWUDS) is the database management system used to enter, store, and analyze state aggregate water-use data. It is part of the U.S. Geological Survey National Water Information System. AWUDS has a graphical user interface that facilitates data entry, revision, review, and approval. This document provides information on the basic functions of AWUDS and the steps for carrying out common tasks that are a part of compiling an aggregated dataset. Also included are explanations of terminology and descriptions of user-interface structure, procedures for using the AWUDS operations, and dataset-naming conventions. Information on water-use category definitions, data-collection methods, and data sources are found in the report “Guidelines for preparation of State water-use estimates,” available at https://pubs.er.usgs.gov/publication/ofr20171029.

Spacelab Lyman Alpha-White Light Coronagraph Program

NASA Technical Reports Server (NTRS)

Kohl, J. L.

1986-01-01

The Spacelab Lyman Alpha Coronagraph (SLAC) of the Smithsonian Astrophysical Observatory (SAO) and the White Light Coronagraph (WLC) to be provided by the High Altitude Observatory (HAO) are two separate coronagraphs which would be operated in a joint fashion during Spacelab missions to be flown by the Space Shuttle. The two instruments would be used to perform joint observations of solar coronal structures from 1.2 to 8.0 solar radii from sun-center in vacuum ultraviolet and visible radiations. Temperatures, densities, and flow velocities throughout the solar wing acceleration region of the inner solar corona were measured. The Phase I Definition activity resulted in the successful definition and preliminary design of the experiment/instrumentation subsystem and associated software, ground support equipment and interfaces to the extended required to accurately estimate the scope of the investigation and prepare an Investigational Development Plan; the performance of the necessary functional, operations, and safety analyses necessary to complete the Experiment Requirements document.

Representation-based user interfaces for the audiovisual library of the year 2000

NASA Astrophysics Data System (ADS)

Aigrain, Philippe; Joly, Philippe; Lepain, Philippe; Longueville, Veronique

1995-03-01

The audiovisual library of the future will be based on computerized access to digitized documents. In this communication, we address the user interface issues which will arise from this new situation. One cannot simply transfer a user interface designed for the piece by piece production of some audiovisual presentation and make it a tool for accessing full-length movies in an electronic library. One cannot take a digital sound editing tool and propose it as a means to listen to a musical recording. In our opinion, when computers are used as mediations to existing contents, document representation-based user interfaces are needed. With such user interfaces, a structured visual representation of the document contents is presented to the user, who can then manipulate it to control perception and analysis of these contents. In order to build such manipulable visual representations of audiovisual documents, one needs to automatically extract structural information from the documents contents. In this communication, we describe possible visual interfaces for various temporal media, and we propose methods for the economically feasible large scale processing of documents. The work presented is sponsored by the Bibliotheque Nationale de France: it is part of the program aiming at developing for image and sound documents an experimental counterpart to the digitized text reading workstation of this library.

Flight Experiment Demonstration System (FEDS) functional description and interface document

NASA Technical Reports Server (NTRS)

Belcher, R. C.; Shank, D. E.

1984-01-01

This document presents a functional description of the Flight Experiment Demonstration System (FEDS) and of interfaces between FEDS and external hardware and software. FEDS is a modification of the Automated Orbit Determination System (AODS). FEDS has been developed to support a ground demonstration of microprocessor-based onboard orbit determination. This document provides an overview of the structure and logic of FEDS and details the various operational procedures to build and execute FEDS. It also documents a microprocessor interface between FEDS and a TDRSS user transponder and describes a software simulator of the interface used in the development and system testing of FEDS.

Reliability program requirements for aeronautical and space system contractors

NASA Technical Reports Server (NTRS)

1987-01-01

General reliability program requirements for NASA contracts involving the design, development, fabrication, test, and/or use of aeronautical and space systems including critical ground support equipment are prescribed. The reliability program requirements require (1) thorough planning and effective management of the reliability effort; (2) definition of the major reliability tasks and their place as an integral part of the design and development process; (3) planning and evaluating the reliability of the system and its elements (including effects of software interfaces) through a program of analysis, review, and test; and (4) timely status indication by formal documentation and other reporting to facilitate control of the reliability program.

49 CFR 1177.1 - Definitions and classifications of documents.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 8 2011-10-01 2011-10-01 false Definitions and classifications of documents. 1177.1 Section 1177.1 Transportation Other Regulations Relating to Transportation (Continued) SURFACE... Definitions and classifications of documents. (a) A “primary document” is a mortgage (excluding those under...

Space Segment (SS) and the Navigation User Segment (US) Interface Control Document (ICD)

DOT National Transportation Integrated Search

1993-10-10

This Interface Control Document (ICD) defines the requirements related to the interface between the Space Segment (SS) of the Global Positioning System (GPS) and the Navigation Users Segment of the GPS. 2880k, 154p.

Chandra Source Catalog: User Interface

NASA Astrophysics Data System (ADS)

Bonaventura, Nina; Evans, Ian N.; Rots, Arnold H.; Tibbetts, Michael S.; van Stone, David W.; Zografou, Panagoula; Primini, Francis A.; Glotfelty, Kenny J.; Anderson, Craig S.; Chen, Judy C.; Davis, John E.; Doe, Stephen M.; Evans, Janet D.; Fabbiano, Giuseppina; Galle, Elizabeth C.; Gibbs, Danny G., II; Grier, John D.; Hain, Roger; Hall, Diane M.; Harbo, Peter N.; He, Helen; Houck, John C.; Karovska, Margarita; Kashyap, Vinay L.; Lauer, Jennifer; McCollough, Michael L.; McDowell, Jonathan C.; Miller, Joseph B.; Mitschang, Arik W.; Morgan, Douglas L.; Mossman, Amy E.; Nichols, Joy S.; Nowak, Michael A.; Plummer, David A.; Refsdal, Brian L.; Siemiginowska, Aneta L.; Sundheim, Beth A.; Winkelman, Sherry L.

2009-09-01

The Chandra Source Catalog (CSC) is intended to be the definitive catalog of all X-ray sources detected by Chandra. For each source, the CSC provides positions and multi-band fluxes, as well as derived spatial, spectral, and temporal source properties. Full-field and source region data products are also available, including images, photon event lists, light curves, and spectra. The Chandra X-ray Center CSC website (http://cxc.harvard.edu/csc/) is the place to visit for high-level descriptions of each source property and data product included in the catalog, along with other useful information, such as step-by-step catalog tutorials, answers to FAQs, and a thorough summary of the catalog statistical characterization. Eight categories of detailed catalog documents may be accessed from the navigation bar on most of the 50+ CSC pages; these categories are: About the Catalog, Creating the Catalog, Using the Catalog, Catalog Columns, Column Descriptions, Documents, Conferences, and Useful Links. There are also prominent links to CSCview, the CSC data access GUI, and related help documentation, as well as a tutorial for using the new CSC/Google Earth interface. Catalog source properties are presented in seven scientific categories, within two table views: the Master Source and Source Observations tables. Each X-ray source has one ``master source'' entry and one or more ``source observation'' entries, the details of which are documented on the CSC ``Catalog Columns'' pages. The master source properties represent the best estimates of the properties of a source; these are extensively described on the following pages of the website: Position and Position Errors, Source Flags, Source Extent and Errors, Source Fluxes, Source Significance, Spectral Properties, and Source Variability. The eight tutorials (``threads'') available on the website serve as a collective guide for accessing, understanding, and manipulating the source properties and data products provided by the catalog.

Automating testbed documentation and database access using World Wide Web (WWW) tools

NASA Technical Reports Server (NTRS)

Ames, Charles; Auernheimer, Brent; Lee, Young H.

1994-01-01

A method for providing uniform transparent access to disparate distributed information systems was demonstrated. A prototype testing interface was developed to access documentation and information using publicly available hypermedia tools. The prototype gives testers a uniform, platform-independent user interface to on-line documentation, user manuals, and mission-specific test and operations data. Mosaic was the common user interface, and HTML (Hypertext Markup Language) provided hypertext capability.

Design study of RL10 derivatives. Volume 3, part 1: Preliminary interface control document. [development of baseline engines for space tug vehicles

NASA Technical Reports Server (NTRS)

Adams, A.

1973-01-01

The Interface Control Document contains engine information necessary for installation of the baseline RL10 Derivative engines in the Space Tug vehicle. The ICD presents a description of the baseline engines and their operating characteristics, mass and load characteristics, and environmental criteria. The document defines the engine/vehicle mechanical, electrical, fluid and pneumatic interface requirements.

mREST Interface Specification

NASA Technical Reports Server (NTRS)

McCartney, Patrick; MacLean, John

2012-01-01

mREST is an implementation of the REST architecture specific to the management and sharing of data in a system of logical elements. The purpose of this document is to clearly define the mREST interface protocol. The interface protocol covers all of the interaction between mREST clients and mREST servers. System-level requirements are not specifically addressed. In an mREST system, there are typically some backend interfaces between a Logical System Element (LSE) and the associated hardware/software system. For example, a network camera LSE would have a backend interface to the camera itself. These interfaces are specific to each type of LSE and are not covered in this document. There are also frontend interfaces that may exist in certain mREST manager applications. For example, an electronic procedure execution application may have a specialized interface for configuring the procedures. This interface would be application specific and outside of this document scope. mREST is intended to be a generic protocol which can be used in a wide variety of applications. A few scenarios are discussed to provide additional clarity but, in general, application-specific implementations of mREST are not specifically addressed. In short, this document is intended to provide all of the information necessary for an application developer to create mREST interface agents. This includes both mREST clients (mREST manager applications) and mREST servers (logical system elements, or LSEs).

[Development of an ophthalmological clinical information system for inpatient eye clinics].

PubMed

Kortüm, K U; Müller, M; Babenko, A; Kampik, A; Kreutzer, T C

2015-12-01

In times of increased digitalization in healthcare, departments of ophthalmology are faced with the challenge of introducing electronic clinical health records (EHR); however, specialized software for ophthalmology is not available with most major EHR sytems. The aim of this project was to create specific ophthalmological user interfaces for large inpatient eye care providers within a hospitalwide EHR. Additionally the integration of ophthalmic imaging systems, scheduling and surgical documentation should be achieved. The existing EHR i.s.h.med (Siemens, Germany) was modified using advanced business application programming (ABAP) language to create specific ophthalmological user interfaces for reproduction and moreover optimization of the clinical workflow. A user interface for documentation of ambulatory patients with eight tabs was designed. From June 2013 to October 2014 a total of 61,551 patient contact details were documented. For surgical documentation a separate user interface was set up. Digital clinical orders for documentation of registration and scheduling of operations user interfaces were also set up. A direct integration of ophthalmic imaging modalities could be established. An ophthalmologist-orientated EHR for outpatient and surgical documentation for inpatient clinics was created and successfully implemented. By incorporation of imaging procedures the foundation of future smart/big data analyses was created.

Atmosphere, Magnetosphere and Plasmas in Space (AMPS). Spacelab payload definition study. Volume 3, book 2: AMPS equipment to Spacelab ICD

NASA Technical Reports Server (NTRS)

1976-01-01

The interfaces between AMPS Payload No.(TBD) and Spacelab are described. The interfaces specified cover the AMPS physical, electrical, and thermal interfaces that are established to prescribe the standard Spacelab configuration required to perform the mission. If the configuration definition changes due to change of Spacelab equipment model, or serial numbers, then reidentification of the Labcraft payload may be required.

Kuipers during photo documentation of the fluid and electrical interfaces on the UIA

NASA Image and Video Library

2012-01-27

ISS030-E-156468 (27 Jan. 2012) --- European Space Agency astronaut Andre Kuipers, Expedition 30 flight engineer, is pictured in the Quest airlock of the International Space Station during photo documentation of the fluid and electrical interfaces on the Umbilical Interface Assembly (UIA) Connector Shelf.

Defense Acquisitions: DOD Efforts to Adopt Open Systems for Its Unmanned Aircraft Systems Have Progressed Slowly

DTIC Science & Technology

2013-07-01

applications introduced by third-party developers to connect to the Android operating system through an open software interface. This allows customers...Definition Multimedia Interface have been developed to address the need for standards for high-definition televisions and computer monitors. Perhaps

The Large Synoptic Survey Telescope OCS and TCS models

NASA Astrophysics Data System (ADS)

Schumacher, German; Delgado, Francisco

2010-07-01

The Large Synoptic Survey Telescope (LSST) is a project envisioned as a system of systems with demanding science, technical, and operational requirements, that must perform as a fully integrated unit. The design and implementation of such a system poses big engineering challenges when performing requirements analysis, detailed interface definitions, operational modes and control strategy studies. The OMG System Modeling Language (SysML) has been selected as the framework for the systems engineering analysis and documentation for the LSST. Models for the overall system architecture and different observatory subsystems have been built describing requirements, structure, interfaces and behavior. In this paper we show the models for the Observatory Control System (OCS) and the Telescope Control System (TCS), and how this methodology has helped in the clarification of the design and requirements. In one common language, the relationships of the OCS, TCS, Camera and Data management subsystems are captured with models of the structure, behavior, requirements and the traceability between them.

SEPS mission and system integration/interface requirements for the space transportation system. [Solar Electric Propulsion System

NASA Technical Reports Server (NTRS)

Cork, M. J.; Barnett, P. M.; Shaffer, J., Jr.; Doran, B. J.

1979-01-01

Earth escape mission requirements on Solar Electric Propulsion System (SEPS), and the interface definition and planned integration between SEPS, user spacecraft, and other elements of the STS. Emphasis is placed on the Comet rendezvous mission, scheduled to be the first SEPS user. Interactive SEPS interface characteristics with spacecraft and mission, as well as the multiple organizations and inter-related development schedules required to integrate the SEPS with spacecraft and STS, require early attention to definition of interfaces in order to assure a successful path to the first SEPS launch in July 1985

Network Speech Systems Technology Program

NASA Astrophysics Data System (ADS)

Weinstein, C. J.

1980-09-01

This report documents work performed during FY 1980 on the DCA-sponsored Network Speech Systems Technology Program. The areas of work reported are: (1) communication systems studies in Demand-Assignment Multiple Access (DAMA), voice/data integration, and adaptive routing, in support of the evolving Defense Communications System (DCS) and Defense Switched Network (DSN); (2) a satellite/terrestrial integration design study including the functional design of voice and data interfaces to interconnect terrestrial and satellite network subsystems; and (3) voice-conferencing efforts dealing with support of the Secure Voice and Graphics Conferencing (SVGC) Test and Evaluation Program. Progress in definition and planning of experiments for the Experimental Integrated Switched Network (EISN) is detailed separately in an FY 80 Experiment Plan Supplement.

System Definition of the James Webb Space Telescope (JWST) Integrated Science Instrument Module (ISIM)

NASA Technical Reports Server (NTRS)

Lundquist, Ray; Aymergen, Cagatay; VanCampen, Julie; Abell, James; Smith, Miles; Driggers, Phillip

2008-01-01

The Integrated Science Instrument Module (ISIM) for the James Webb Space Telescope (JWST) provides the critical functions and the environment for the four science instruments on JWST. This complex system development across many international organizations presents unique challenges and unique solutions. Here we describe how the requirement flow has been coordinated through the documentation system, how the tools and processes are used to minimize impact to the development of the affected interfaces, how the system design has matured, how the design review process operates, and how the system implementation is managed through reporting to ensure a truly world class scientific instrument compliment is created as the final product.

Dynamics explorer: Interface definition study, volume 1

NASA Technical Reports Server (NTRS)

1978-01-01

Work done in response to the work statement wherein a specific deliverable was not identified but where design and analysis tasks were identified is reported. The summary and baseline change list is included along with design notes for the spacecraft system, thermal subsystem, power subsystem, communications subsystem, plasma wave instrument interface definition, and the structure.

Tailoring a ConOps for NASA LSP Integrated Operations

NASA Technical Reports Server (NTRS)

Owens, Skip Clark V., III

2017-01-01

An integral part of the Systems Engineering process is the creation of a Concept of Operations (ConOps) for a given system, with the ConOps initially established early in the system design process and evolved as the system definition and design matures. As Integration Engineers in NASA's Launch Services Program (LSP) at Kennedy Space Center (KSC), our job is to manage the interface requirements for all the robotic space missions that come to our Program for a Launch Service. LSP procures and manages a launch service from one of our many commercial Launch Vehicle Contractors (LVCs) and these commercial companies are then responsible for developing the Interface Control Document (ICD), the verification of the requirements in that document, and all the services pertaining to integrating the spacecraft and launching it into orbit. However, one of the systems engineering tools that have not been employed within LSP to date is a Concept of Operations. The goal of this paper is to research the format and content that goes into these various aerospace industry ConOps and tailor the format and content into template form, so the template may be used as an engineering tool for spacecraft integration with future LSP procured launch services. This tailoring effort was performed as the authors final Masters Project in the Spring of 2016 for the Stevens Institute of Technology and modified for publication with INCOSE (Owens, 2016).

Appendix F. Developmental enforcement algorithm definition document : predictive braking enforcement algorithm definition document.

DOT National Transportation Integrated Search

2012-05-01

The purpose of this document is to fully define and describe the logic flow and mathematical equations for a predictive braking enforcement algorithm intended for implementation in a Positive Train Control (PTC) system.

47 CFR 10.10 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... this part. (g) “C” Interface. The interface between the Alert Gateway and CMS provider Gateway. (h) CMS provider Gateway. The mechanism(s) that supports the “C” interface and associated protocols between the...

National Airspace System interface management plan

DOT National Transportation Integrated Search

1986-01-01

This document is intended to implement Interface Management for interfacing subsystems of the National Airspace System (NAS) and for external NAS interfaces by establishing a process which assures that: Interface requirements are agreed to by interfa...

Visual design for the user interface, Part 1: Design fundamentals.

PubMed

Lynch, P J

1994-01-01

Digital audiovisual media and computer-based documents will be the dominant forms of professional communication in both clinical medicine and the biomedical sciences. The design of highly interactive multimedia systems will shortly become a major activity for biocommunications professionals. The problems of human-computer interface design are intimately linked with graphic design for multimedia presentations and on-line document systems. This article outlines the history of graphic interface design and the theories that have influenced the development of today's major graphic user interfaces.

COMPUTATIONAL FLUID DYNAMICS MODELING OF SCALED HANFORD DOUBLE SHELL TANK MIXING - CFD MODELING SENSITIVITY STUDY RESULTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

JACKSON VL

2011-08-31

The primary purpose of the tank mixing and sampling demonstration program is to mitigate the technical risks associated with the ability of the Hanford tank farm delivery and celtification systems to measure and deliver a uniformly mixed high-level waste (HLW) feed to the Waste Treatment and Immobilization Plant (WTP) Uniform feed to the WTP is a requirement of 24590-WTP-ICD-MG-01-019, ICD-19 - Interface Control Document for Waste Feed, although the exact definition of uniform is evolving in this context. Computational Fluid Dynamics (CFD) modeling has been used to assist in evaluating scaleup issues, study operational parameters, and predict mixing performance atmore » full-scale.« less

Development and evaluation of nursing user interface screens using multiple methods.

PubMed

Hyun, Sookyung; Johnson, Stephen B; Stetson, Peter D; Bakken, Suzanne

2009-12-01

Building upon the foundation of the Structured Narrative Electronic Health Record (EHR) model, we applied theory-based (combined Technology Acceptance Model and Task-Technology Fit Model) and user-centered methods to explore nurses' perceptions of functional requirements for an electronic nursing documentation system, design user interface screens reflective of the nurses' perspectives, and assess nurses' perceptions of the usability of the prototype user interface screens. The methods resulted in user interface screens that were perceived to be easy to use, potentially useful, and well-matched to nursing documentation tasks associated with Nursing Admission Assessment, Blood Administration, and Nursing Discharge Summary. The methods applied in this research may serve as a guide for others wishing to implement user-centered processes to develop or extend EHR systems. In addition, some of the insights obtained in this study may be informative to the development of safe and efficient user interface screens for nursing document templates in EHRs.

PDBj Mine: design and implementation of relational database interface for Protein Data Bank Japan

PubMed Central

Kinjo, Akira R.; Yamashita, Reiko; Nakamura, Haruki

2010-01-01

This article is a tutorial for PDBj Mine, a new database and its interface for Protein Data Bank Japan (PDBj). In PDBj Mine, data are loaded from files in the PDBMLplus format (an extension of PDBML, PDB's canonical XML format, enriched with annotations), which are then served for the user of PDBj via the worldwide web (WWW). We describe the basic design of the relational database (RDB) and web interfaces of PDBj Mine. The contents of PDBMLplus files are first broken into XPath entities, and these paths and data are indexed in the way that reflects the hierarchical structure of the XML files. The data for each XPath type are saved into the corresponding relational table that is named as the XPath itself. The generation of table definitions from the PDBMLplus XML schema is fully automated. For efficient search, frequently queried terms are compiled into a brief summary table. Casual users can perform simple keyword search, and 'Advanced Search' which can specify various conditions on the entries. More experienced users can query the database using SQL statements which can be constructed in a uniform manner. Thus, PDBj Mine achieves a combination of the flexibility of XML documents and the robustness of the RDB. Database URL: http://www.pdbj.org/ PMID:20798081

PDBj Mine: design and implementation of relational database interface for Protein Data Bank Japan.

PubMed

Kinjo, Akira R; Yamashita, Reiko; Nakamura, Haruki

2010-08-25

This article is a tutorial for PDBj Mine, a new database and its interface for Protein Data Bank Japan (PDBj). In PDBj Mine, data are loaded from files in the PDBMLplus format (an extension of PDBML, PDB's canonical XML format, enriched with annotations), which are then served for the user of PDBj via the worldwide web (WWW). We describe the basic design of the relational database (RDB) and web interfaces of PDBj Mine. The contents of PDBMLplus files are first broken into XPath entities, and these paths and data are indexed in the way that reflects the hierarchical structure of the XML files. The data for each XPath type are saved into the corresponding relational table that is named as the XPath itself. The generation of table definitions from the PDBMLplus XML schema is fully automated. For efficient search, frequently queried terms are compiled into a brief summary table. Casual users can perform simple keyword search, and 'Advanced Search' which can specify various conditions on the entries. More experienced users can query the database using SQL statements which can be constructed in a uniform manner. Thus, PDBj Mine achieves a combination of the flexibility of XML documents and the robustness of the RDB. Database URL: http://www.pdbj.org/

The Binding Database: data management and interface design.

PubMed

Chen, Xi; Lin, Yuhmei; Liu, Ming; Gilson, Michael K

2002-01-01

The large and growing body of experimental data on biomolecular binding is of enormous value in developing a deeper understanding of molecular biology, in developing new therapeutics, and in various molecular design applications. However, most of these data are found only in the published literature and are therefore difficult to access and use. No existing public database has focused on measured binding affinities and has provided query capabilities that include chemical structure and sequence homology searches. We have created Binding DataBase (BindingDB), a public, web-accessible database of measured binding affinities. BindingDB is based upon a relational data specification for describing binding measurements via Isothermal Titration Calorimetry (ITC) and enzyme inhibition. A corresponding XML Document Type Definition (DTD) is used to create and parse intermediate files during the on-line deposition process and will also be used for data interchange, including collection of data from other sources. The on-line query interface, which is constructed with Java Servlet technology, supports standard SQL queries as well as searches for molecules by chemical structure and sequence homology. The on-line deposition interface uses Java Server Pages and JavaBean objects to generate dynamic HTML and to store intermediate results. The resulting data resource provides a range of functionality with brisk response-times, and lends itself well to continued development and enhancement.

8 CFR 270.1 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Definitions. 270.1 Section 270.1 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS PENALTIES FOR DOCUMENT FRAUD § 270.1 Definitions. For the purpose of this part— Document means an instrument on which is recorded, by means of...

Assessment Report Sandia National Laboratories Fuel Cycle Technologies Quality Assurance Evaluation of FY15 SNL FCT M2 Milestone Deliverables

DOE Office of Scientific and Technical Information (OSTI.GOV)

Appel, Gordon John

Sandia National Laboratories (SNL) Fuel Cycle Technologies (FCT) program activities are conducted in accordance with FCT Quality Assurance Program Document (FCT-QAPD) requirements. The FCT-QAPD interfaces with SNL approved Quality Assurance Program Description (SNL-QAPD) as explained in the Sandia National Laboratories QA Program Interface Document for FCT Activities (Interface Document). This plan describes SNL's FY16 assessment of SNL's FY15 FCT M2 milestone deliverable's compliance with program QA requirements, including SNL R&A requirements. The assessment is intended to confirm that SNL's FY15 milestone deliverables contain the appropriate authenticated review documentation and that there is a copy marked with SNL R&A numbers.

Live Virtual Constructive (LVC): Interface Control Document (ICD) for the LVC Gateway. [Flight Test 3

NASA Technical Reports Server (NTRS)

Jovic, Srba

2015-01-01

This Interface Control Document (ICD) documents and tracks the necessary information required for the Live Virtual and Constructive (LVC) systems components as well as protocols for communicating with them in order to achieve all research objectives captured by the experiment requirements. The purpose of this ICD is to clearly communicate all inputs and outputs from the subsystem components.

System Definition Document

DOT National Transportation Integrated Search

1996-06-12

The Gary-Chicago-Milwaukee (GCM) Corridor Transportation Information Center : (C-TIC) System Definition Document describes the C-TIC concept and defines the : high level processes and dataflows. The Requirements Specification together : with the Inte...

8 CFR 1270.1 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Definitions. 1270.1 Section 1270.1 Aliens... PENALTIES FOR DOCUMENT FRAUD § 1270.1 Definitions. For the purpose of this part— Document means an instrument on which is recorded, by means of letters, figures, or marks, matters which may be used to fulfill...

8 CFR 1270.1 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 8 Aliens and Nationality 1 2014-01-01 2014-01-01 false Definitions. 1270.1 Section 1270.1 Aliens... PENALTIES FOR DOCUMENT FRAUD § 1270.1 Definitions. For the purpose of this part— Document means an instrument on which is recorded, by means of letters, figures, or marks, matters which may be used to fulfill...

8 CFR 1270.1 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 8 Aliens and Nationality 1 2011-01-01 2011-01-01 false Definitions. 1270.1 Section 1270.1 Aliens... PENALTIES FOR DOCUMENT FRAUD § 1270.1 Definitions. For the purpose of this part— Document means an instrument on which is recorded, by means of letters, figures, or marks, matters which may be used to fulfill...

8 CFR 1270.1 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 8 Aliens and Nationality 1 2012-01-01 2012-01-01 false Definitions. 1270.1 Section 1270.1 Aliens... PENALTIES FOR DOCUMENT FRAUD § 1270.1 Definitions. For the purpose of this part— Document means an instrument on which is recorded, by means of letters, figures, or marks, matters which may be used to fulfill...

15 CFR 280.2 - Definitions used in this subpart.

Code of Federal Regulations, 2011 CFR

2011-01-01

... PROGRAMS FASTENER QUALITY General § 280.2 Definitions used in this subpart. In addition to the definitions... the United States Patent and Trademark Office. Act. The Fastener Quality Act (15 U.S.C. 5401 et seq... ISO/IEC Guides or other documents, and redesignations of those Guides or documents. Under Secretary...

15 CFR 280.2 - Definitions used in this subpart.

Code of Federal Regulations, 2010 CFR

2010-01-01

... PROGRAMS FASTENER QUALITY General § 280.2 Definitions used in this subpart. In addition to the definitions... the United States Patent and Trademark Office. Act. The Fastener Quality Act (15 U.S.C. 5401 et seq... ISO/IEC Guides or other documents, and redesignations of those Guides or documents. Under Secretary...

Aft flight deck documentation with freefloating headset interface unit (HIU)

NASA Image and Video Library

1983-09-05

STS008-18-479 (5 Sept 1983) --- Aft flight deck documentation includes on orbit station with control panel A2, aft viewing window W9, and communications kit assembly (ASSY) headset (HDST) interface unit (HIU) and cable free floating in front of it.

Definition of Free O-H Groups of Water at the Air-Water Interface.

PubMed

Tang, Fujie; Ohto, Tatsuhiko; Hasegawa, Taisuke; Xie, Wen Jun; Xu, Limei; Bonn, Mischa; Nagata, Yuki

2018-01-09

Free O-H groups of water are often found at the water-hydrophobic medium interface, e.g. for water contact with hydrophobic protein residues, or at the water-air interface. In surface-specific vibrational spectroscopic studies using sum-frequency generation (SFG) spectroscopy, free O-H groups are experimentally well characterized in the O-H stretch region by a sharp 3700 cm -1 peak. Although these free O-H groups are often defined as the O-H groups which are not hydrogen-bonded to other water molecules, a direct correlation between such non-hydrogen-bonded O-H groups and the 3700 cm -1 SFG response has been lacking. Our data show that commonly used hydrogen bond definitions do not adequately capture the free O-H groups contributing to the 3700 cm -1 peak. We thus formulate a new definition for capturing the subensemble of the surface free O-H groups using the intermolecular distance and the angle formed by the water dimer, through the comparison of the ∼3700 cm -1 SFG response and the responses from the selected free O-H groups at the HOD-air interface. Using these optimized free O-H group definitions, we infer the fraction of interfacial water molecules with free O-H groups of 28%, a vibrational lifetime of the free O-H groups of 1.3 ps, and the angle formed by the free O-H groups and the surface normal of 67° at the water-air interface. We expect that this improved free O-H group definition can be helpful in exploring the structure and dynamics of the interfacial water.

Updating the definition and role of public health nursing to advance and guide the specialty.

PubMed

Bekemeier, Betty; Walker Linderman, Tessa; Kneipp, Shawn; Zahner, Susan J

2015-01-01

National changes in the context for public health services are influencing the nature of public health nursing practice. Despite this, the document that defines public health nursing as a specialty--The Definition and Role of Public Health Nursing--has remained in wide use since its publication in 1996 without a review or update. With support from the American Public Health Association (APHA) Public Health Nursing Section, a national Task Force, was formed in November 2012 to update the definition of public health nursing, using processes that reflected deliberative democratic principles. A yearlong process was employed that included a modified Delphi technique and various modes of engagement such as online discussion boards, questionnaires, and public comment to review. The resulting 2013 document consisted of a reaffirmation of the one-sentence 1996 definition, while updating supporting documentation to align with the current social, economic, political, and health care context. The 2013 document was strongly endorsed by vote of the APHA Public Health Nursing Section elected leadership. The 2013 definition and document affirm the relevance of a population-focused definition of public health nursing to complex systems addressed in current practice and articulate critical roles of public health nurses (PHN) in these settings. © 2014 Wiley Periodicals, Inc.

Cockpit Interfaces, Displays, and Alerting Messages for the Interval Management Alternative Clearances (IMAC) Experiment

NASA Technical Reports Server (NTRS)

Baxley, Brian T.; Palmer, Michael T.; Swieringa, Kurt A.

2015-01-01

This document describes the IM cockpit interfaces, displays, and alerting capabilities that were developed for and used in the IMAC experiment, which was conducted at NASA Langley in the summer of 2015. Specifically, this document includes: (1) screen layouts for each page of the interface; (2) step-by-step instructions for data entry, data verification and input error correction; (3) algorithm state messages and error condition alerting messages; (4) aircraft speed guidance and deviation indications; and (5) graphical display of the spatial relationships between the Ownship aircraft and the Target aircraft. The controller displays for IM will be described in a separate document.

Putting Home Data Management into Perspective

DTIC Science & Technology

2009-12-01

approaches. However, users of home and personal storage live it. Popular interfaces (e.g., iTunes , iPhoto, and even drop-down lists of recently...users of home and personal storage live it. Popular interfaces (e.g., iTunes , iPhoto, and even drop-down lists of recently-opened Word documents...live it. Popular interfaces (e.g., iTunes , iPhoto, and even drop- down lists of recently-opened Word documents) allow users to navigate file

VET in Schools 2016: Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2017

2017-01-01

This document covers the data terms used in the "VET in Schools 2016" summary publication. The primary purpose of this document is to assist users to understand the specific data terms. Terms that appear in the publication are listed in alphabetical order with the following information provided for each: (1) definition: a brief…

Crew interface definition study, phase 1

NASA Technical Reports Server (NTRS)

Callihan, J. C.; Kraemer, J. W.; Alles, J. A.

1971-01-01

The timeline analysis of the Shuttle orbiter missions which was conducted in the Phase I Crew Interface Definition Study and the requirements for the man-in-the-loop simulation study are presented. Mission definitions and objectives are presented as they relate to various Shuttle Orbiter missions. The requirements for crew participation and the information required by the crew are discussed, and finally the rationale behind the display concept and calling procedures is given. The simulation objectives, the simulation mechanization, including a detailed presentation of the display and control concept, the simulator test plan and the results are discussed.

Human machine interface display design document.

DOT National Transportation Integrated Search

2008-01-01

The purpose of this document is to describe the design for the human machine interface : (HMI) display for the Next Generation 9-1-1 (NG9-1-1) System (or system of systems) : based on the initial Tier 1 requirements identified for the NG9-1-1 S...

Systems engineering interfaces: A model based approach

NASA Astrophysics Data System (ADS)

Fosse, E.; Delp, C. L.

The engineering of interfaces is a critical function of the discipline of Systems Engineering. Included in interface engineering are instances of interaction. Interfaces provide the specifications of the relevant properties of a system or component that can be connected to other systems or components while instances of interaction are identified in order to specify the actual integration to other systems or components. Current Systems Engineering practices rely on a variety of documents and diagrams to describe interface specifications and instances of interaction. The SysML[1] specification provides a precise model based representation for interfaces and interface instance integration. This paper will describe interface engineering as implemented by the Operations Revitalization Task using SysML, starting with a generic case and culminating with a focus on a Flight System to Ground Interaction. The reusability of the interface engineering approach presented as well as its extensibility to more complex interfaces and interactions will be shown. Model-derived tables will support the case studies shown and are examples of model-based documentation products.

SciReader enables reading of medical content with instantaneous definitions.

PubMed

Gradie, Patrick R; Litster, Megan; Thomas, Rinu; Vyas, Jay; Schiller, Martin R

2011-01-25

A major problem patients encounter when reading about health related issues is document interpretation, which limits reading comprehension and therefore negatively impacts health care. Currently, searching for medical definitions from an external source is time consuming, distracting, and negatively impacts reading comprehension and memory of the material. SciReader was built as a Java application with a Flex-based front-end client. The dictionary used by SciReader was built by consolidating data from several sources and generating new definitions with a standardized syntax. The application was evaluated by measuring the percentage of words defined in different documents. A survey was used to test the perceived effect of SciReader on reading time and comprehension. We present SciReader, a web-application that simplifies document interpretation by allowing users to instantaneously view medical, English, and scientific definitions as they read any document. This tool reveals the definitions of any selected word in a small frame at the top of the application. SciReader relies on a dictionary of ~750,000 unique Biomedical and English word definitions. Evaluation of the application shows that it maps ~98% of words in several different types of documents and that most users tested in a survey indicate that the application decreases reading time and increases comprehension. SciReader is a web application useful for reading medical and scientific documents. The program makes jargon-laden content more accessible to patients, educators, health care professionals, and the general public.

Spacelab payload accommodation handbook. Appendix B: Structure interface definition module

NASA Technical Reports Server (NTRS)

1978-01-01

The mechanical interfaces between Spacelab and its payload are defined. The envelopes available for mounting payload hardware are specified together with the standard structural attachment interfaces. Overall load capabilities and the local load capabilities for individual attachment interfaces are defined for the standard mounting locations. The mechanical environment is defined and the mechanical interfaces between the payload and the EPDS, CDMS and ECS are included.

Design Document for the Moods Data Management System (MDMS) Version 1.0

DTIC Science & Technology

1994-08-01

1 1.3 Document Overview ... . . . . . . . . . . . . . . . . . . . . 1 2 RERENCED DOCUMENTS .................... 2 3 PRELIM[INARY DESIGN... 3 3.1.1.1 CSC-: Grpical User Interfce(GUI).......... 3 3.1.112 CSC-2: Data Management Module (DMM) .................. 4 3.1.1.3 CSC- 3 : Data...5 3.1.1.6 GUI-DMM (CSC-1ICSC-2) internal interface................5 3.1.1.7 GUI-DAM (CSC-1/CSC- 3 ) Internal Interface................5

VET in Schools 2009: Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

This document covers the data terms used in the "VET in Schools 2009" report. The primary purpose of this document is to assist users of the report to understand the specific data terms used within it. Terms that appear in the report are listed in alphabetical order with the following information provided for each: (1) Definition: a…

VET in Schools 2008: Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

This document covers the data terms used in the "VET in Schools 2008" report. The primary purpose of this document is to assist users of the report to understand the specific data terms used within it. Terms that appear in the report are listed in alphabetical order with the following information provided for each: (1) Definition: a…

VET in Schools, 2007: Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2009

2009-01-01

This document covers the data terms used in the "VET in Schools, 2007" report. The primary purpose of this document is to help users of the report understand the specific data terms used in it. Terms that appear in the report are listed in alphabetical order with the following information provided for each: (1) Definition: a brief…

VET in Schools, 2006: Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2008

2008-01-01

This document covers the data terms used in the "VET in Schools, 2006" report. The primary purpose of this document is to help users understand the specific data terms used in the report. Terms that appear in the report are listed in alphabetical order with the following information provided for each: (1) Definition: a brief explanation…

An MBSE Approach to Space Suit Development

NASA Technical Reports Server (NTRS)

Cordova, Lauren; Kovich, Christine; Sargusingh, Miriam

2012-01-01

The EVA/Space Suit Development Office (ESSD) Systems Engineering and Integration (SE&I) team has utilized MBSE in multiple programs. After developing operational and architectural models, the MBSE framework was expanded to link the requirements space to the system models through functional analysis and interfaces definitions. By documenting all the connections within the technical baseline, ESSD experienced significant efficiency improvements in analysis and identification of change impacts. One of the biggest challenges presented to the MBSE structure was a program transition and restructuring effort, which was completed successfully in 4 months culminating in the approval of a new EVA Technical Baseline. During this time three requirements sets spanning multiple DRMs were streamlined into one NASA-owned Systems Requirement Document (SRD) that successfully identified requirements relevant to the current hardware development effort while remaining extensible to support future hardware developments. A capability-based hierarchy was established to provide a more flexible framework for future space suit development that can support multiple programs with minimal rework of basic EVA/Space Suit requirements. This MBSE approach was most recently applied for generation of an EMU Demonstrator technical baseline being developed for an ISS DTO. The relatively quick turnaround of operational concepts, architecture definition, and requirements for this new suit development has allowed us to test and evolve the MBSE process and framework in an extremely different setting while still offering extensibility and traceability throughout ESSD projects. The ESSD MBSE framework continues to be evolved in order to support integration of all products associated with the SE&I engine.

30 CFR 550.200 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... OPERATIONS IN THE OUTER CONTINENTAL SHELF Plans and Information General Information § 550.200 Definitions... of Safety and Environmental Enforcement. CID means Conservation Information Document. CZMA means Coastal Zone Management Act. DOCD means Development Operations Coordination Document. DPP means...

14 CFR § 1215.102 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., and the necessary TDRSS operational areas, interface devices, and NASA communication circuits that... interface. (c) Bit stream. The electronic signals acquired by TDRSS from the user craft or the user...

User interface issues in supporting human-computer integrated scheduling

NASA Technical Reports Server (NTRS)

Cooper, Lynne P.; Biefeld, Eric W.

1991-01-01

The topics are presented in view graph form and include the following: characteristics of Operations Mission Planner (OMP) schedule domain; OMP architecture; definition of a schedule; user interface dimensions; functional distribution; types of users; interpreting user interaction; dynamic overlays; reactive scheduling; and transitioning the interface.

Project W-211 initial tank retrieval systems year 2000 compliance assessment project plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

BUSSELL, J.H.

1999-08-24

This assessment describes the potential Year 2000 (Y2K) problems and describes the methods for achieving Y2K Compliance for Project W-211, Initial Tank Retrieval Systems (ITRS). The purpose of this assessment is to give an overview of the project. This document will not be updated and any dates contained in this document are estimates and may change. The scope of project W-211 is to provide systems for retrieval of radioactive wastes from ten double-shell tanks (DST). systems will be installed in tanks 102-AP, 104-AP, 105-AN, 104-AN, 102-AZ, 101-AW, 103-AN, 107-AN, 102-AY, and 102-SY. The current tank selection and sequence supports phasemore » I feed delivery to privatized processing plants. A detailed description of system dates, functions, interfaces, potential Y2K problems, and date resolutions can not be described since the project is in the definitive design phase. This assessment will describe the methods, protocols, and practices to assure that equipment and systems do not have Y2K problems.« less

Media independent interface

NASA Technical Reports Server (NTRS)

1987-01-01

The work done on the Media Independent Interface (MII) Interface Control Document (ICD) program is described and recommendations based on it were made. Explanations and rationale for the content of the ICD itself are presented.

Applying Minimal Manual Principles for Documentation of Graphical User Interfaces.

ERIC Educational Resources Information Center

Nowaczyk, Ronald H.; James, E. Christopher

1993-01-01

Investigates the need to include computer screens in documentation for software using a graphical user interface. Describes the uses and purposes of "minimal manuals" and their principles. Studies student reaction to their use of one of three on-screen manuals: screens, icon, and button. Finds some benefit for including icon and button…

Structural definition of the BIL and DL: a new universal methodology to rationalize non-linear χ(2)(ω) SFG signals at charged interfaces, including χ(3)(ω) contributions.

PubMed

Pezzotti, Simone; Galimberti, Daria Ruth; Shen, Y Ron; Gaigeot, Marie-Pierre

2018-02-14

This work provides unambiguous definitions from theoretical simulations of the two interfacial regions named the BIL (binding interfacial layer) and DL (diffuse layer) at charged solid/water and air/water interfaces. The BIL and DL nomenclature follows the pioneering work of Wen et al. [Phys. Rev. Lett. 2016, 116, 016101]. Our definitions are based on the intrinsic structural properties of water only. Knowing the BIL and DL interfacial regions, one is then able to deconvolve the χ (2) (ω) non-linear SFG (sum frequency generation) response into χ(ω) and χ(ω) contributions, thus providing a detailed molecular interpretation of these signals and of the measured total SFG. We furthermore show that the χ(ω) spectrum arises from the χ (3) (ω) non-linear third order contribution of bulk liquid water, here calculated for several charged interfaces and shown to be universal. The χ(ω) contribution therefore has the same origin in terms of molecular normal modes at any charged interface. The molecular interpretation of χ(ω) is hence at the heart of the unambiguous molecular comprehension and interpretation of the measured total SFG signal at any charged interface.

Phast4Windows: A 3D graphical user interface for the reactive-transport simulator PHAST

USGS Publications Warehouse

Charlton, Scott R.; Parkhurst, David L.

2013-01-01

Phast4Windows is a Windows® program for developing and running groundwater-flow and reactive-transport models with the PHAST simulator. This graphical user interface allows definition of grid-independent spatial distributions of model properties—the porous media properties, the initial head and chemistry conditions, boundary conditions, and locations of wells, rivers, drains, and accounting zones—and other parameters necessary for a simulation. Spatial data can be defined without reference to a grid by drawing, by point-by-point definitions, or by importing files, including ArcInfo® shape and raster files. All definitions can be inspected, edited, deleted, moved, copied, and switched from hidden to visible through the data tree of the interface. Model features are visualized in the main panel of the interface, so that it is possible to zoom, pan, and rotate features in three dimensions (3D). PHAST simulates single phase, constant density, saturated groundwater flow under confined or unconfined conditions. Reactions among multiple solutes include mineral equilibria, cation exchange, surface complexation, solid solutions, and general kinetic reactions. The interface can be used to develop and run simple or complex models, and is ideal for use in the classroom, for analysis of laboratory column experiments, and for development of field-scale simulations of geochemical processes and contaminant transport.

Triple redundant computer system/display and keyboard subsystem interface

NASA Technical Reports Server (NTRS)

Gulde, F. J.

1973-01-01

Interfacing of the redundant display and keyboard subsystem with the triple redundant computer system is defined according to space shuttle design. The study is performed in three phases: (1) TRCS configuration and characteristics identification; (2) display and keyboard subsystem configuration and characteristics identification, and (3) interface approach definition.

Automated storage and retrieval of data obtained in the Interkosmos project

NASA Technical Reports Server (NTRS)

Ziolkovski, K.; Pakholski, V.

1975-01-01

The formation of a data bank and information retrieval system for scientific data is described. The stored data can be digital or documentation data. Data classification methods are discussed along with definition and compilation of the dictionary utilized, definition of the indexing scheme, and definition of the principles used in constructing a file for documents, data blocks, and tapes. Operating principles are also presented.

Describing different brain computer interface systems through a unique model: a UML implementation.

PubMed

Quitadamo, Lucia Rita; Marciani, Maria Grazia; Cardarilli, Gian Carlo; Bianchi, Luigi

2008-01-01

All the protocols currently implemented in brain computer interface (BCI) experiments are characterized by different structural and temporal entities. Moreover, due to the lack of a unique descriptive model for BCI systems, there is not a standard way to define the structure and the timing of a BCI experimental session among different research groups and there is also great discordance on the meaning of the most common terms dealing with BCI, such as trial, run and session. The aim of this paper is to provide a unified modeling language (UML) implementation of BCI systems through a unique dynamic model which is able to describe the main protocols defined in the literature (P300, mu-rhythms, SCP, SSVEP, fMRI) and demonstrates to be reasonable and adjustable according to different requirements. This model includes a set of definitions of the typical entities encountered in a BCI, diagrams which explain the structural correlations among them and a detailed description of the timing of a trial. This last represents an innovation with respect to the models already proposed in the literature. The UML documentation and the possibility of adapting this model to the different BCI systems built to date, make it a basis for the implementation of new systems and a mean for the unification and dissemination of resources. The model with all the diagrams and definitions reported in the paper are the core of the body language framework, a free set of routines and tools for the implementation, optimization and delivery of cross-platform BCI systems.

Margin of Safety Definition and Examples Used in Safety Basis Documents and the USQ Process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beaulieu, R. A.

The Nuclear Safety Management final rule, 10 CFR 830, provides an undefined term, margin of safety (MOS). Safe harbors listed in 10 CFR 830, Table 2, such as DOE-STD-3009 use but do not define the term. This lack of definition has created the need for the definition. This paper provides a definition of MOS and documents examples of MOS as applied in a U.S. Department of Energy (DOE) approved safety basis for an existing nuclear facility. If we understand what MOS looks like regarding Technical Safety Requirements (TSR) parameters, then it helps us compare against other parameters that do notmore » involve a MOS. This paper also documents parameters that are not MOS. These criteria could be used to determine if an MOS exists in safety basis documents. This paper helps DOE, including the National Nuclear Security Administration (NNSA) and its contractors responsible for the safety basis improve safety basis documents and the unreviewed safety question (USQ) process with respect to MOS.« less

Design of Launcher Towards Spacecraft Comfort: Ariane 6 Objectives

NASA Astrophysics Data System (ADS)

Mourey, Patrick; Lambare, Hadrien; Valbuena, Matias F.

2014-06-01

Preliminary advanced studies were performed recently to select the possible concepts for a launcher that could succeed to Ariane 5. During the end of 2012 Space Ministry Conference, a configuration defining the propellant of the stages and the coarse staging ("PPH") was frozen in order to engage the preliminary selection concept studies. The first phase consisted to select the main features of the architecture in order to go deeper in the different matters or the advanced studies. The concept was selected mid of 2013.During all these phases of the preliminary project, different criteria (such as the recurring cost which is a major one) were used to quote the different concepts, among which the "payload comfort", ie the minimization of the environment generated by the launcher toward the satellites.The minimization of the environment was first expressed in term of objectives in the Mission Requirement Document (MRD) for the different mechanical environment such as quasi-static loads, dynamic loads, acoustics, shocks... Criteria such as usable volume, satellites frequency requirement and interface requirement are also expressed in the MRD.The definition of these different criteria was of course fixed taking benefit from the launcher operator experience based on a long story of dealing with spacecraft-launcher interface issues on Ariane, Soyouz and Vega. The general idea is to target improved or similar levels than those currently applicable for Ariane 5. For some environment for which a special need is anticipated from the potential end users, a special effort is aimed.The preliminary advanced study phase is currently running and has to address specific topics such as the definition of the upper part layout including geometry ofthe fairing, the definition of the launch pad with preliminary ideas to minimize acoustics and blast wave or first calculations on dimensioning dynamic load- cases such as thrust oscillations of the solid rocket motors (SRM).The present paper will give a very preliminary overview of the different topics in relation with these general launcher-spacecraft issues.

Glossary of CERCLA, RCRA and TSCA related terms and acronyms. Environmental Guidance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-10-01

This glossary contains CERCLA, RCRA and TSCA related terms that are most often encountered in the US Department of Energy (DOE) Environmental Restoration and Emergency Preparedness activities. Detailed definitions are included for key terms. The CERCLA definitions included in this glossary are taken from the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA), as amended and related federal rulemakings. The RCRA definitions included in this glossary are taken from the Resource Conservation and Recovery Act (RCRA) and related federal rulemakings. The TSCA definitions included in this glossary are taken from the Toxic Substances and Control Act (TSCA) and related federalmore » rulemakings. Definitions related to TSCA are limited to those sections in the statute and regulations concerning PCBs and asbestos.Other sources for definitions include additional federal rulemakings, assorted guidance documents prepared by the US Environmental Protection Agency (EPA), guidance and informational documents prepared by the US Department of Energy (DOE), and DOE Orders. The source of each term is noted beside the term. Terms presented in this document reflect revised and new definitions published before July 1, 1993.« less

GMSEC Interface Specification Document 2016 March

NASA Technical Reports Server (NTRS)

Handy, Matthew

2016-01-01

The GMSEC Interface Specification Document contains the standard set of defined messages. Each GMSEC standard message contains a GMSEC Information Bus Header section and a Message Contents section. Each message section identifies required fields, optional fields, data type and recommended use of the fields. Additionally, this document includes the message subjects associated with the standard messages. The system design of the operations center should ensure the components that are selected use both the API and the defined standard messages in order to achieve full interoperability from component to component.

Definition and documentation of engineering processes

DOE Office of Scientific and Technical Information (OSTI.GOV)

McDonald, G.W.

1997-11-01

This tutorial is an extract of a two-day workshop developed under the auspices of the Quality Engineering Department at Sandia National Laboratories. The presentation starts with basic definitions and addresses why processes should be defined and documented. It covers three primary topics: (1) process considerations and rationale, (2) approach to defining and documenting engineering processes, and (3) an IDEFO model of the process for defining engineering processes.

Concurrent Image Processing Executive (CIPE). Volume 3: User's guide

NASA Technical Reports Server (NTRS)

Lee, Meemong; Cooper, Gregory T.; Groom, Steven L.; Mazer, Alan S.; Williams, Winifred I.; Kong, Mih-Seh

1990-01-01

CIPE (the Concurrent Image Processing Executive) is both an executive which organizes the parameter inputs for hypercube applications and an environment which provides temporary data workspace and simple real-time function definition facilities for image analysis. CIPE provides two types of user interface. The Command Line Interface (CLI) provides a simple command-driven environment allowing interactive function definition and evaluation of algebraic expressions. The menu interface employs a hierarchical screen-oriented menu system where the user is led through a menu tree to any specific application and then given a formatted panel screen for parameter entry. How to initialize the system through the setup function, how to read data into CIPE symbols, how to manipulate and display data through the use of executive functions, and how to run an application in either user interface mode, are described.

28 CFR 68.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... IMMIGRATION-RELATED EMPLOYMENT PRACTICES, AND DOCUMENT FRAUD § 68.2 Definitions. For purposes of this part: Adjudicatory proceeding means an administrative judicial-type proceeding, before the Office of the Chief... law by an Administrative Law Judge or the Chief Administrative Hearing Officer; Document fraud cases...

28 CFR 68.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... IMMIGRATION-RELATED EMPLOYMENT PRACTICES, AND DOCUMENT FRAUD § 68.2 Definitions. For purposes of this part: Adjudicatory proceeding means an administrative judicial-type proceeding, before the Office of the Chief... law by an Administrative Law Judge or the Chief Administrative Hearing Officer; Document fraud cases...

Secure content objects

DOEpatents

Evans, William D [Cupertino, CA

2009-02-24

A secure content object protects electronic documents from unauthorized use. The secure content object includes an encrypted electronic document, a multi-key encryption table having at least one multi-key component, an encrypted header and a user interface device. The encrypted document is encrypted using a document encryption key associated with a multi-key encryption method. The encrypted header includes an encryption marker formed by a random number followed by a derivable variation of the same random number. The user interface device enables a user to input a user authorization. The user authorization is combined with each of the multi-key components in the multi-key encryption key table and used to try to decrypt the encrypted header. If the encryption marker is successfully decrypted, the electronic document may be decrypted. Multiple electronic documents or a document and annotations may be protected by the secure content object.

Tailoring of EIA-649-1: Definition of Major (Class I) Engineering Change Proposal

DTIC Science & Technology

2015-05-15

MISSILE SYSTEMS CENTER TAILORING TAILORING OF EIA -649-1: DEFINITION OF MAJOR (CLASS I) ENGINEERING CHANGE PROPOSAL APPROVED FOR...PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED 1 Tailoring of EIA -649-1: Definition of Major (Class I) ECP. 1. Intent of this Tailoring Document...This tailoring document remedies a requirements gap in the industry consensus standard, EIA -649-1: 2015. Specifically, this tailoring provides a

Space and Missile Systems Center Standard: Parts, Materials, and Processes Control Program for Space Vehicles

DTIC Science & Technology

2013-04-12

statement of work. This document may be tailored by the acquisition activity for the specific application or program prior to contract award. 1.3...5 3. Definitions and Acronyms 3.1 Definitions The following definitions describe terms used throughout this document. Acquisition Activity The...acquisition activity is the Government, contractor, or subcontractor acquiring the equipment, system, subsystem, part, or material for which this

Constructs of the Work/Life Interface and Their Importance to HRD

ERIC Educational Resources Information Center

McMillan, Heather S.; Morris, Michael Lane; Atchley, E. Kate

2008-01-01

The purpose of this paper is to identify construct definitions and measurement tools for the work/life interface concepts: balance, conflict and facilitation. An understanding of these concepts is critical to HRD (human resource development) professionals because interventions designed to counter work/life interface issues can not be created, and…

Unveiling the Semicoherent Interface with Definite Orientation Relationships between Reinforcements and Matrix in Novel Al3BC/Al Composites.

PubMed

Zhao, Yongfeng; Qian, Zhao; Ma, Xia; Chen, Houwen; Gao, Tong; Wu, Yuying; Liu, Xiangfa

2016-10-05

High-strength lightweight Al-based composites are promising materials for a wide range of applications. To provide high performance, a strong bonding interface for effective load transfer from the matrix to the reinforcement is essential. In this work, the novel Al 3 BC reinforced Al composites have been in situ fabricated through a liquid-solid reaction method and the bonding interface between Al 3 BC and Al matrix has been unveiled. The HRTEM characterizations on the Al 3 BC/Al interface verify it to be a semicoherent bonding structure with definite orientation relationships: (0001) Al 3 BC //(11̅1) Al ;[112̅0] Al 3 BC //[011] Al . Periodic arrays of geometrical misfit dislocations are also observed along the interface at each (0001) Al 3 BC plane or every five (11̅1) Al planes. This kind of interface between the reinforcement and the matrix is strong enough for effective load transfer, which would lead to the evidently improved strength and stiffness of the introduced new Al 3 BC/Al composites.

What Is Real-World Data? A Review of Definitions Based on Literature and Stakeholder Interviews.

PubMed

Makady, Amr; de Boer, Anthonius; Hillege, Hans; Klungel, Olaf; Goettsch, Wim

Despite increasing recognition of the value of real-world data (RWD), consensus on the definition of RWD is lacking. To review definitions publicly available for RWD to shed light on similarities and differences between them. A literature review and stakeholder interviews were used to compile data from eight groups of stakeholders. Data from documents and interviews were subjected to coding analysis. Definitions identified were classified into four categories: 1) data collected in a non-randomized controlled trial setting, 2) data collected in a non-interventional/non-controlled setting, 3) data collected in a non-experimental setting, and 4) others (i.e., data that do not fit into the other three categories). The frequency of definitions identified per category was recorded. Fifty-three documents and 20 interviews were assessed. Thirty-eight definitions were identified: 20 out of 38 definitions (53%) were category 1 definitions, 9 (24%) were category 2 definitions, 5 (13%) were category 3 definitions, and 4 (11%) were category 4 definitions. Differences were identified between, and within, definition categories. For example, opinions differed on the aspects of intervention with which non-interventional/non-controlled settings should abide. No definitions were provided in two interviews or identified in 33 documents. Most of the definitions defined RWD as data collected in a non-randomized controlled trial setting. A considerable number of definitions, however, diverged from this concept. Moreover, a significant number of authors and stakeholders did not have an official, institutional definition for RWD. Persisting variability in stakeholder definitions of RWD may lead to disparities among different stakeholders when discussing RWD use in decision making. Copyright © 2017 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Graphical Interfaces for Simulation.

ERIC Educational Resources Information Center

Hollan, J. D.; And Others

This document presents a discussion of the development of a set of software tools to assist in the construction of interfaces to simulations and real-time systems. Presuppositions to the approach to interface design that was used are surveyed, the tools are described, and the conclusions drawn from these experiences in graphical interface design…

Requirements Document for Development of a Livermore Tomography Tools Interface

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seetho, I. M.

In this document, we outline an exercise performed at LLNL to evaluate the user interface deficits of a LLNL-developed CT reconstruction software package, Livermore Tomography Tools (LTT). We observe that a difficult-to-use command line interface and the lack of support functions compound to generate a bottleneck in the CT reconstruction process when input parameters to key functions are not well known. Through the exercise of systems engineering best practices, we generate key performance parameters for a LTT interface refresh, and specify a combination of back-end (“test-mode” functions) and front-end (graphical user interface visualization and command scripting tools) solutions to LTT’smore » poor user interface that aim to mitigate issues and lower costs associated with CT reconstruction using LTT. Key functional and non-functional requirements and risk mitigation strategies for the solution are outlined and discussed.« less

TSAFE Interface Control Document v 2.0

NASA Technical Reports Server (NTRS)

Paielli, Russell A.; Bach, Ralph E.

2013-01-01

This document specifies the data interface for TSAFE, the Tactical Separation-Assured Flight Environment. TSAFE is a research prototype of a software application program for alerting air traffic controllers to imminent conflicts in enroute airspace. It is intended for Air Route Traffic Control Centers ("Centers") in the U.S. National Airspace System. It predicts trajectories for approximately 3 minutes into the future, searches for conflicts, and sends data about predicted conflicts to the client, which uses the data to alert an air traffic controller of conflicts. TSAFE itself does not provide a graphical user interface.

7 CFR 1718.102 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... LOAN SECURITY DOCUMENTS FOR ELECTRIC BORROWERS Loan Contracts With Distribution Borrowers § 1718.102 Definitions. For the purposes of this subpart: Borrower means any organization that has an outstanding loan... defined in 7 CFR 1710.2. Loan documents means the mortgage (or other security instrument acceptable to RUS...

XML and E-Journals: The State of Play.

ERIC Educational Resources Information Center

Wusteman, Judith

2003-01-01

Discusses the introduction of the use of XML (Extensible Markup Language) in publishing electronic journals. Topics include standards, including DTDs (Document Type Definition), or document type definitions; aggregator requirements; SGML (Standard Generalized Markup Language); benefits of XML for e-journals; XML metadata; the possibility of…

Integrating International Engineering Organizations For Successful ISS Operations

NASA Technical Reports Server (NTRS)

Blome, Elizabeth; Duggan, Matt; Patten, L.; Pieterek, Hhtrud

2006-01-01

The International Space Station (ISS) is a multinational orbiting space laboratory that is built in cooperation with 16 nations. The design and sustaining engineering expertise is spread worldwide. As the number of Partners with orbiting elements on the ISS grows, the challenge NASA is facing as the ISS integrator is to ensure that engineering expertise and data are accessible in a timely fashion to ensure ongoing operations and mission success. Integrating international engineering teams requires definition and agreement on common processes and responsibilities, joint training and the emergence of a unique engineering team culture. ISS engineers face daunting logistical and political challenges regarding data sharing requirements. To assure systematic information sharing and anomaly resolution of integrated anomalies, the ISS Partners are developing multi-lateral engineering interface procedures. Data sharing and individual responsibility are key aspects of this plan. This paper describes several examples of successful multilateral anomaly resolution. These successes were used to form the framework of the Partner to Partner engineering interface procedures, and this paper describes those currently documented multilateral engineering processes. Furthermore, it addresses the challenges experienced to date, and the forward work expected in establishing a successful working relationship with Partners as their hardware is launched.

Documentation for MeshKit - Reactor Geometry (&mesh) Generator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jain, Rajeev; Mahadevan, Vijay

2015-09-30

This report gives documentation for using MeshKit’s Reactor Geometry (and mesh) Generator (RGG) GUI and also briefly documents other algorithms and tools available in MeshKit. RGG is a program designed to aid in modeling and meshing of complex/large hexagonal and rectilinear reactor cores. RGG uses Argonne’s SIGMA interfaces, Qt and VTK to produce an intuitive user interface. By integrating a 3D view of the reactor with the meshing tools and combining them into one user interface, RGG streamlines the task of preparing a simulation mesh and enables real-time feedback that reduces accidental scripting mistakes that could waste hours of meshing.more » RGG interfaces with MeshKit tools to consolidate the meshing process, meaning that going from model to mesh is as easy as a button click. This report is designed to explain RGG v 2.0 interface and provide users with the knowledge and skills to pilot RGG successfully. Brief documentation of MeshKit source code, tools and other algorithms available are also presented for developers to extend and add new algorithms to MeshKit. RGG tools work in serial and parallel and have been used to model complex reactor core models consisting of conical pins, load pads, several thousands of axially varying material properties of instrumentation pins and other interstices meshes.« less

Modular Integrated Stackable Layers (MISL) 1.1 Design Specification. Design Guideline Document

NASA Technical Reports Server (NTRS)

Yim, Hester J.

2012-01-01

This document establishes the design guideline of the Modular Instrumentation Data Acquisition (MI-DAQ) system in utilization of several designs available in EV. The MI- DAQ provides the options to the customers depending on their system requirements i.e. a 28V interface power supply, a low power battery operated system, a low power microcontroller, a higher performance microcontroller, a USB interface, a Ethernet interface, a wireless communication, various sensor interfaces, etc. Depending on customer's requirements, the each functional board can be stacked up from a bottom level of power supply to a higher level of stack to provide user interfaces. The stack up of boards are accomplished by a predefined and standardized power bus and data bus connections which are included in this document along with other physical and electrical guidelines. This guideline also provides information for a new design options. This specification is the product of a collaboration between NASA/JSC/EV and Texas A&M University. The goal of the collaboration is to open source the specification and allow outside entities to design, build, and market modules that are compatible with the specification. NASA has designed and is using numerous modules that are compatible to this specification. A limited number of these modules will also be released as open source designs to support the collaboration. The released designs are listed in the Applicable Documents.

Virtual workstations and telepresence interfaces: Design accommodations and prototypes for Space Station Freedom evolution

NASA Technical Reports Server (NTRS)

Mcgreevy, Michael W.

1990-01-01

An advanced human-system interface is being developed for evolutionary Space Station Freedom as part of the NASA Office of Space Station (OSS) Advanced Development Program. The human-system interface is based on body-pointed display and control devices. The project will identify and document the design accommodations ('hooks and scars') required to support virtual workstations and telepresence interfaces, and prototype interface systems will be built, evaluated, and refined. The project is a joint enterprise of Marquette University, Astronautics Corporation of America (ACA), and NASA's ARC. The project team is working with NASA's JSC and McDonnell Douglas Astronautics Company (the Work Package contractor) to ensure that the project is consistent with space station user requirements and program constraints. Documentation describing design accommodations and tradeoffs will be provided to OSS, JSC, and McDonnell Douglas, and prototype interface devices will be delivered to ARC and JSC. ACA intends to commercialize derivatives of the interface for use with computer systems developed for scientific visualization and system simulation.

Phast4Windows: a 3D graphical user interface for the reactive-transport simulator PHAST.

PubMed

Charlton, Scott R; Parkhurst, David L

2013-01-01

Phast4Windows is a Windows® program for developing and running groundwater-flow and reactive-transport models with the PHAST simulator. This graphical user interface allows definition of grid-independent spatial distributions of model properties-the porous media properties, the initial head and chemistry conditions, boundary conditions, and locations of wells, rivers, drains, and accounting zones-and other parameters necessary for a simulation. Spatial data can be defined without reference to a grid by drawing, by point-by-point definitions, or by importing files, including ArcInfo® shape and raster files. All definitions can be inspected, edited, deleted, moved, copied, and switched from hidden to visible through the data tree of the interface. Model features are visualized in the main panel of the interface, so that it is possible to zoom, pan, and rotate features in three dimensions (3D). PHAST simulates single phase, constant density, saturated groundwater flow under confined or unconfined conditions. Reactions among multiple solutes include mineral equilibria, cation exchange, surface complexation, solid solutions, and general kinetic reactions. The interface can be used to develop and run simple or complex models, and is ideal for use in the classroom, for analysis of laboratory column experiments, and for development of field-scale simulations of geochemical processes and contaminant transport. Published 2012. This article is a U.S. Government work and is in the public domain in the USA.

Optical mass memory system (AMM-13). AMM/DBMS interface control document

NASA Technical Reports Server (NTRS)

Bailey, G. A.

1980-01-01

The baseline for external interfaces of a 10 to the 13th power bit, optical archival mass memory system (AMM-13) is established. The types of interfaces addressed include data transfer; AMM-13, Data Base Management System, NASA End-to-End Data System computer interconnect; data/control input and output interfaces; test input data source; file management; and facilities interface.

Product Structure, the Heart of Product Definition

NASA Technical Reports Server (NTRS)

DeHoog, C., Jr.

1999-01-01

This paper describes the LMMSS Product Definition System (PDS) philosophy and approach were the use of each item parts document or software can be traced to a specific end item (EI) serial/tail number of the product. It explains why a part-oriented approach to data organization and configuration management is required. The definition of part-oriented is that all appropriate product definition data products will be collected. Referenced and managed by their linkage/relationship to parts/items, The paper will touch upon how LMMSS store/controls product definition information under each project's top product designator in a two tiered approach. One tier for each product end item and another tier which contain/controls listings of drawings, documents. Specifications and standards that are required for hardware item definition.

Engine structures modeling software system: Computer code. User's manual

NASA Technical Reports Server (NTRS)

1992-01-01

ESMOSS is a specialized software system for the construction of geometric descriptive and discrete analytical models of engine parts, components and substructures which can be transferred to finite element analysis programs such as NASTRAN. The software architecture of ESMOSS is designed in modular form with a central executive module through which the user controls and directs the development of the analytical model. Modules consist of a geometric shape generator, a library of discretization procedures, interfacing modules to join both geometric and discrete models, a deck generator to produce input for NASTRAN and a 'recipe' processor which generates geometric models from parametric definitions. ESMOSS can be executed both in interactive and batch modes. Interactive mode is considered to be the default mode and that mode will be assumed in the discussion in this document unless stated otherwise.

Continuation of surge life of transient voltage suppressor

NASA Technical Reports Server (NTRS)

Clark, O. M.

1977-01-01

Efforts expended in testing, analyzing and the development of a meaningful definition of the mean number of peak pulses before failure (mp2bf) levels of a family of transient voltage suppressor devices were documented. Tests were done to determine the ability of the transient suppressor to effectively and reliably protect against severe short term, millisecond range, and transient voltages of the types resulting from inductive load switching and induced lightning. Existing pulse testing instrumentation was utilized, interfaced to an automatic sequencing test rack accommodating up to 50 devices. Tests were performed in step stress increments of 25% beginning at 25% and extending thru 100% rated I(pp) for each voltage category. The four voltage types test were the 6.8V, 33V, 91V, and 190V. Engineering efforts addressed the problem of improving the reliability of the 190V types.

NASA's Man-Systems Integration Standards: A Human Factors Engineering Standard for Everyone in the Nineties

NASA Technical Reports Server (NTRS)

Booher, Cletis R.; Goldsberry, Betty S.

1994-01-01

During the second half of the 1980s, a document was created by the National Aeronautics and Space Administration (NASA) to aid in the application of good human factors engineering and human interface practices to the design and development of hardware and systems for use in all United States manned space flight programs. This comprehensive document, known as NASA-STD-3000, the Man-Systems Integration Standards (MSIS), attempts to address, from a human factors engineering/human interface standpoint, all of the various types of equipment with which manned space flight crew members must deal. Basically, all of the human interface situations addressed in the MSIS are present in terrestrially based systems also. The premise of this paper is that, starting with this already created standard, comprehensive documents addressing human factors engineering and human interface concerns could be developed to aid in the design of almost any type of equipment or system which humans interface with in any terrestrial environment. Utilizing the systems and processes currently in place in the MSIS Development Facility at the Johnson Space Center in Houston, TX, any number of MSIS volumes addressing the human factors / human interface needs of any terrestrially based (or, for that matter, airborne) system could be created.

Standard classification of software documentation

NASA Technical Reports Server (NTRS)

Tausworthe, R. C.

1976-01-01

General conceptual requirements for standard levels of documentation and for application of these requirements to intended usages. These standards encourage the policy to produce only those forms of documentation that are needed and adequate for the purpose. Documentation standards are defined with respect to detail and format quality. Classes A through D range, in order, from the most definitive down to the least definitive, and categories 1 through 4 range, in order, from high-quality typeset down to handwritten material. Criteria for each of the classes and categories, as well as suggested selection guidelines for each are given.

Minimum Hamiltonian ascent trajectory evaluation (MASTRE) program (update to automatic flight trajectory design, performance prediction, and vehicle sizing for support of shuttle and shuttle derived vehicles) users manual

NASA Technical Reports Server (NTRS)

Lyons, J. T.; Borchers, William R.

1993-01-01

Documentation for the User Interface Program for the Minimum Hamiltonian Ascent Trajectory Evaluation (MASTRE) is provided. The User Interface Program is a separate software package designed to ease the user input requirements when using the MASTRE Trajectory Program. This document supplements documentation on the MASTRE Program that consists of the MASTRE Engineering Manual and the MASTRE Programmers Guide. The User Interface Program provides a series of menus and tables using the VAX Screen Management Guideline (SMG) software. These menus and tables allow the user to modify the MASTRE Program input without the need for learning the various program dependent mnemonics. In addition, the User Interface Program allows the user to modify and/or review additional input Namelist and data files, to build and review command files, to formulate and calculate mass properties related data, and to have a plotting capability.

Tutorial and hands-on demonstration of a fluent interpreter for CARE 3

NASA Technical Reports Server (NTRS)

Martensen, Anna L.; Bavuso, Salvatore J.

1987-01-01

This document updates one originally written as part of a workshop on the CARE 3 capability held at NASA Langley Research Center on February 22 to 24, 1984. Subsequent to the workshop, CARE 3 and its interface program were enhanced and extensive changes to the original document became necessary. This document, like its predecessor, is designed to illustrate the user interface capability and the salient CARE 3 features by describing various examples of reliability models and their solutions through the use of CARE 3.

Managing for fire in the interface: Challenges and opportunities

Treesearch

Alan J. Long; Dale D. Wade; Feank C. Beall

2004-01-01

Fire managers define the wildland-urban interface as all areas were flammable wildland fuels are adjacent to homes and communities. With this definition, the wild-land-urban interface may encompass a much broader landscape than traditionally perceived. For example, the Tunnel Fire in the Oakland hills in 1991 included a large area that, for practical purposes, could be...

Standalone engine simulator (SAES), Engine Dynamics simulator (EDS) Xerox Sigma 5 interface hardware manual

NASA Technical Reports Server (NTRS)

Kirshten, P. M.; Black, S.; Pearson, R.

1979-01-01

The ESS-EDS and EDS-Sigma interfaces within the standalone engine simulator are described. The operation of these interfaces, including the definition and use of special function signals and data flow paths within them during data transfers, is presented along with detailed schematics and circuit layouts of the described equipment.

Spacelab payload accommodation handbook. Appendix A: Avionics interface definition

NASA Technical Reports Server (NTRS)

1978-01-01

The Spacelab side of the electrical interface between Spacelab subsystem equipment and experiments is presented. The electrical hardware which interfaces with the experiments is defined and the signal/load characteristics are stated. Major subsystems considered include: electrical power and distribution; command and data management subsystem; orbiter avionics via dedicated connectors of Spacelab; and electrical ground support equipment.

9 CFR 205.202 - “Effective financing statement” or EFS.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Uniform Commercial Code (or equivalent document under future successor State law), but can be an entirely separate document meeting the definition in (c)(4). Note that (c)(4) contains a comprehensive definition of... State allows electronic filing of financing statements without the signature of the debtor under...

9 CFR 205.202 - “Effective financing statement” or EFS.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Uniform Commercial Code (or equivalent document under future successor State law), but can be an entirely separate document meeting the definition in (c)(4). Note that (c)(4) contains a comprehensive definition of... State allows electronic filing of financing statements without the signature of the debtor under...

Definition and preliminary design of the LAWS (Laser Atmospheric Wind Sounder), volume 2, phase 2

NASA Technical Reports Server (NTRS)

1992-01-01

Accurate knowledge of winds is critical to our understanding of the earth's climate and to our ability to predict climate change. Winds are a fundamental component of highly nonlinear interactions between oceans, land surfaces, and the atmosphere. Interactions at these interfaces are the focus of much climate change research. Although wind information is critical for advancing our understanding, currently most of our description of atmospheric motion is obtained indirectly - i.e., derived from observations of temperature and moisture through geostrophic relationships. Direct measurement of winds over the globe is limited to land-based rawinsonde surface stations and a few ship/aircraft reports. Cloud track winds using satellite imagery are calculated but must be used with great care. The LAWS mission objective, therefore, is to provide diurnal and global direct observations of winds - an observation that will incrementally enhance our knowledge of the earth's climate and physical processes responsible for its change. This document is Volume 2 of the LAWS Phase 2 Final Study Report and describes the definition and preliminary design of the LAWS instrument, together with details of the laser breadboard program conducted during the last 18 months of the program.

Task Management in the New ATLAS Production System

NASA Astrophysics Data System (ADS)

De, K.; Golubkov, D.; Klimentov, A.; Potekhin, M.; Vaniachine, A.; Atlas Collaboration

2014-06-01

This document describes the design of the new Production System of the ATLAS experiment at the LHC [1]. The Production System is the top level workflow manager which translates physicists' needs for production level processing and analysis into actual workflows executed across over a hundred Grid sites used globally by ATLAS. As the production workload increased in volume and complexity in recent years (the ATLAS production tasks count is above one million, with each task containing hundreds or thousands of jobs) there is a need to upgrade the Production System to meet the challenging requirements of the next LHC run while minimizing the operating costs. In the new design, the main subsystems are the Database Engine for Tasks (DEFT) and the Job Execution and Definition Interface (JEDI). Based on users' requests, DEFT manages inter-dependent groups of tasks (Meta-Tasks) and generates corresponding data processing workflows. The JEDI component then dynamically translates the task definitions from DEFT into actual workload jobs executed in the PanDA Workload Management System [2]. We present the requirements, design parameters, basics of the object model and concrete solutions utilized in building the new Production System and its components.

Save medical personnel's time by improved user interfaces.

PubMed

Kindler, H

1997-01-01

Common objectives in the industrial countries are the improvement of quality of care, clinical effectiveness, and cost control. Cost control, in particular, has been addressed through the introduction of case mix systems for reimbursement by social-security institutions. More data is required to enable quality improvement, increases in clinical effectiveness and for juridical reasons. At first glance, this documentation effort is contradictory to cost reduction. However, integrated services for resource management based on better documentation should help to reduce costs. The clerical effort for documentation should be decreased by providing a co-operative working environment for healthcare professionals applying sophisticated human-computer interface technology. Additional services, e.g., automatic report generation, increase the efficiency of healthcare personnel. Modelling the medical work flow forms an essential prerequisite for integrated resource management services and for co-operative user interfaces. A user interface aware of the work flow provides intelligent assistance by offering the appropriate tools at the right moment. Nowadays there is a trend to client/server systems with relational databases or object-oriented databases as repository. The work flows used for controlling purposes and to steer the user interfaces must be represented in the repository.

NAS (Host/ARTS) IIIA to VME Modem Interface ATC Interface Hardware Manual

DOT National Transportation Integrated Search

1990-10-01

This document is reference material for personnel using the National Airspace : System (NAS) (HOST or ARTS IIIA) Air Traffic Control (ATC) Interface Subsystem. : It was originally developed to be part of the Data Link Test and Analysis System : (DATA...

Abbreviations and acronyms

NASA Technical Reports Server (NTRS)

1994-01-01

This booklet provides a partial list of acronyms, abbreviations, and other short word forms, including their definitions, used in documents at the Goddard Space Flight Center (GSFC). This list does not preclude the use of other short forms of less general usage, as long as these short forms are identified the first time they appear in a document and are defined in a glossary in the document in which they are used. This document supplements information in the GSFC Scientific and Technical Information Handbook (GHB 2200.2/April 1989). It is not intended to contain all short word forms used in GSFC documents; however, it was compiled of actual short forms used in recent GSFC documents. The entries are listed first, alphabetically by the short form, and then again alphabetically by definition.

ROMPS critical design review. Volume 2: Robot module design documentation

NASA Technical Reports Server (NTRS)

Dobbs, M. E.

1992-01-01

The robot module design documentation for the Remote Operated Materials Processing in Space (ROMPS) experiment is compiled. This volume presents the following information: robot module modifications; Easylab commands definitions and flowcharts; Easylab program definitions and flowcharts; robot module fault conditions and structure charts; and C-DOC flow structure and cross references.

Orbiter CIU/IUS communications hardware evaluation

NASA Technical Reports Server (NTRS)

Huth, G. K.

1979-01-01

The DOD and NASA inertial upper stage communication system design, hardware specifications and interfaces were analyzed to determine their compatibility with the Orbiter payload communications equipment (Payload Interrogator, Payload Signal Processors, Communications Interface Unit, and the Orbiter operational communications equipment (the S-Band and Ku-band systems). Topics covered include (1) IUS/shuttle Orbiter communications interface definition; (2) Orbiter avionics equipment serving the IUS; (3) IUS communication equipment; (4) IUS/shuttle Orbiter RF links; (5) STDN/TDRS S-band related activities; and (6) communication interface unit/Orbiter interface issues. A test requirement plan overview is included.

Earth Observing System (EOS) Advanced Microwave Sounding Unit-A (AMSU-A): Instrumentation interface control document

NASA Technical Reports Server (NTRS)

1994-01-01

This Interface Control Document (ICD) defines the specific details of the complete accomodation information between the Earth Observing System (EOS) PM Spacecraft and the Advanced Microwave Sounding Unit (AMSU-A)Instrument. This is the first submittal of the ICN: it will be updated periodically throughout the life of the program. The next update is planned prior to Critical Design Review (CDR).

Design specifications for NALDA (Naval Aviation Logistics Data Analysis) CAI (computer aided instruction): Phase 2, Interim report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Twitty, A.F.; Handler, B.H.; Duncan, L.D.

Data Systems Engineering Organization (DSEO) personnel are developing a prototype computer aided instruction (CAI) system for the Naval Aviation Logistics Data Analysis (NALDA) system. The objective of this project is to provide a prototype for implementing CAI as an enhancement to existing NALDA training. The CAI prototype project is being performed in phases. The task undertaken in Phase I was to analyze the problem and the alternative solutions and to develop a set of recommendations on how best to proceed. In Phase II a structured design and specification document was completed that will provide the basis for development and implementationmore » of the desired CAI system. Phase III will consist of designing, developing, and testing a user interface which will extend the features of the Phase II prototype. The design of the CAI prototype has followed a rigorous structured analysis based on Yourdon/DeMarco methodology and Information Engineering tools. This document includes data flow diagrams, a data dictionary, process specifications, an entity-relationship diagram, a curriculum description, special function key definitions, and a set of standards developed for the NALDA CAI Prototype.« less

Effective Use of SMSS: A Simple Strategy and Sample Implementation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hensinger, David

1998-09-30

The purpose of this document is to present a strategy for effectively using SMSS (Sea.leable Mass Storage System) and to distribute a simple implementation of this strategy. This work was done as a stopgap memure to ~lOW ~ ~~yst to USe the storage Power of SMSS in the absence of a more user friendly interface. The features and functionality discussed in this document represent a minimum set of capabilities to allow a useful archiving interface functionality. The implementation presented is the most basic possible and would benefit significantly from an organized support and documentation effort.

Design strategies and functionality of the Visual Interface for Virtual Interaction Development (VIVID) tool

NASA Technical Reports Server (NTRS)

Nguyen, Lac; Kenney, Patrick J.

1993-01-01

Development of interactive virtual environments (VE) has typically consisted of three primary activities: model (object) development, model relationship tree development, and environment behavior definition and coding. The model and relationship tree development activities are accomplished with a variety of well-established graphic library (GL) based programs - most utilizing graphical user interfaces (GUI) with point-and-click interactions. Because of this GUI format, little programming expertise on the part of the developer is necessary to create the 3D graphical models or to establish interrelationships between the models. However, the third VE development activity, environment behavior definition and coding, has generally required the greatest amount of time and programmer expertise. Behaviors, characteristics, and interactions between objects and the user within a VE must be defined via command line C coding prior to rendering the environment scenes. In an effort to simplify this environment behavior definition phase for non-programmers, and to provide easy access to model and tree tools, a graphical interface and development tool has been created. The principal thrust of this research is to effect rapid development and prototyping of virtual environments. This presentation will discuss the 'Visual Interface for Virtual Interaction Development' (VIVID) tool; an X-Windows based system employing drop-down menus for user selection of program access, models, and trees, behavior editing, and code generation. Examples of these selection will be highlighted in this presentation, as will the currently available program interfaces. The functionality of this tool allows non-programming users access to all facets of VE development while providing experienced programmers with a collection of pre-coded behaviors. In conjunction with its existing, interfaces and predefined suite of behaviors, future development plans for VIVID will be described. These include incorporation of dual user virtual environment enhancements, tool expansion, and additional behaviors.

Documentation of a Collaborative Transition Planning System: A Curriculum Planning Guide for Students with Mild Disabilities.

ERIC Educational Resources Information Center

Jackson, Jeanne

This report describes and analyzes the transition process used at Savanna High School, Anaheim, California, and documents the unique contribution of the school's Independent Living Skills Transition Center. The report's seven sections focus on: (1) transition definitions and the need for a shared definition among agency personnel; (2) team…

Initial '80s Development of Inflated Antennas

NASA Technical Reports Server (NTRS)

Friese, G. J.; Bilyeu, G. D.; Thomas, M.

1983-01-01

State of the art technology was considered in the definition and documentation of a membrane surface suitable for use in a space reflector system for long durations in orbit. Requirements for a metal foil-plastic laminate structural element were determined and a laboratory model of a rigidized element to test for strength characteristics was constructed. Characteristics of antennas ranging from 10 meters to 1000 meters were determined. The basic antenna configuration studied consists of (1) a thin film reflector, (2) a thin film cone, (3) a self-rigidizing structural torus at the interface of the cone and reflector; and (4) an inflation system. The reflector is metallized and, when inflated, has a parabolic shape. The cone not only completes the enclosure of the inflatant, but also holds the antenna feed at its apex. The torus keeps the inflated cone-reflector from collapsing inward. Laser test equipment determined the accuracy of the inflated paraboloids.

A reference architecture for integrated EHR in Colombia.

PubMed

de la Cruz, Edgar; Lopez, Diego M; Uribe, Gustavo; Gonzalez, Carolina; Blobel, Bernd

2011-01-01

The implementation of national EHR infrastructures has to start by a detailed definition of the overall structure and behavior of the EHR system (system architecture). Architectures have to be open, scalable, flexible, user accepted and user friendly, trustworthy, based on standards including terminologies and ontologies. The GCM provides an architectural framework created with the purpose of analyzing any kind of system, including EHR system´s architectures. The objective of this paper is to propose a reference architecture for the implementation of an integrated EHR in Colombia, based on the current state of system´s architectural models, and EHR standards. The proposed EHR architecture defines a set of services (elements) and their interfaces, to support the exchange of clinical documents, offering an open, scalable, flexible and semantically interoperable infrastructure. The architecture was tested in a pilot tele-consultation project in Colombia, where dental EHR are exchanged.

Definition ofthe Design Trajectory and Entry Flight Corridor for the NASA Orion Exploration Mission 1 Entry Trajectory Using an Integrated Approach and Optimization

NASA Technical Reports Server (NTRS)

McNamara, Luke W.; Braun, Robert D.

2014-01-01

One of the key design objectives of NASA's Orion Exploration Mission 1 (EM- 1) is to execute a guided entry trajectory demonstrating GN&C capability. The focus of this paper is defining the flyable entry corridor for EM-1 taking into account multiple subsystem constraints such as complex aerothermal heating constraints, aerothermal heating objectives, landing accuracy constraints, structural load limits, Human-System-Integration-Requirements, Service Module debris disposal limits and other flight test objectives. During the EM-1 Design Analysis Cycle 1 design challenges came up that made defining the flyable entry corridor for the EM-1 mission critical to mission success. This document details the optimization techniques that were explored to use with the 6-DOF ANTARES simulation to assist in defining the design entry interface state and entry corridor with respect to key flight test constraints and objectives.

Data Management Systems (DMS): Complex data types study. Volume 1: Appendices A-B. Volume 2: Appendices C1-C5. Volume 3: Appendices D1-D3 and E

NASA Technical Reports Server (NTRS)

Leibfried, T. F., Jr.; Davari, Sadegh; Natarajan, Swami; Zhao, Wei

1992-01-01

Two categories were chosen for study: the issue of using a preprocessor on Ada code of Application Programs which would interface with the Run-Time Object Data Base Standard Services (RODB STSV), the intent was to catch and correct any mis-registration errors of the program coder between the user declared Objects, their types, their addresses, and the corresponding RODB definitions; and RODB STSV Performance Issues and Identification of Problems with the planned methods for accessing Primitive Object Attributes, this included the study of an alternate storage scheme to the 'store objects by attribute' scheme in the current design of the RODB. The study resulted in essentially three separate documents, an interpretation of the system requirements, an assessment of the preliminary design, and a detailing of the components of a detailed design.

Bioresearch Module Design Definition and Space Shuttle Vehicle Integration Study. Volume 1: Basic Report

NASA Technical Reports Server (NTRS)

Lang, A. L., Jr.

1971-01-01

Preliminary designs of the Bioexplorer spacecraft, developed in an earlier study program, are analyzed and updated to conform to a new specification which includes use of both the Scout and the space shuttle vehicle for launch. The updated spacecraft is referred to as bioresearch module. It is capable of supporting a variety of small biological experiments in near-earth and highly elliptical earth orbits. The baseline spacecraft design is compatible with the Scout launch vehicle. Inboard profile drawings, weight statements, interface drawings, and spacecraft parts and aerospace ground equipment lists are provided to document the design. The baseline design was analyzed to determine the design and cost impact of a set of optional features. These include reduced experiment power and thermal load, addition of an experiment television monitor, and replacement of VHF with S-band communications. The impact of these options on power required, weight change and cost is defined.

What Is Applied Linguistics?

ERIC Educational Resources Information Center

James, Carl

1993-01-01

Ostensive and expository definitions of applied linguistics are assessed. It is suggested that the key to a meaningful definition lies in the dual articulation of applied linguistics: it is an interface between linguistics and practicality. Its role as an "expert system" is suggested. (45 references) (Author/LB)

Understanding Clinician Information Demands and Synthesis of Clinical Documents in Electronic Health Record Systems

ERIC Educational Resources Information Center

Farri, Oladimeji Feyisetan

2012-01-01

Large quantities of redundant clinical data are usually transferred from one clinical document to another, making the review of such documents cognitively burdensome and potentially error-prone. Inadequate designs of electronic health record (EHR) clinical document user interfaces probably contribute to the difficulties clinicians experience while…

Generating Hierarchical Document Indices from Common Denominators in Large Document Collections.

ERIC Educational Resources Information Center

O'Kane, Kevin C.

1996-01-01

Describes an algorithm for computer generation of hierarchical indexes for document collections. The resulting index, when presented with a graphical interface, provides users with a view of a document collection that permits general browsing and informal search activities via an access method that requires no keyboard entry or prior knowledge of…

Earth Observatory Satellite system definition study. Report 2: Instrument constraints and interfaces

NASA Technical Reports Server (NTRS)

1974-01-01

The instrument constraints and interface specifications for the Earth Observatory Satellite (EOS) are discussed. The Land Use Classification Mission using a 7 band Thematic Mapper and a 4 band High Resolution Pointable Imager is stressed. The mission and performance of the instruments were reviewed and expanded to reflect the instrument as a part of the total remote sensing system. A preliminary EOS interface handbook is provided to describe the mission and system, to specify the spacecraft interfaces to potential instrument contractors, and to describe the instrument interface data required by the system integration contractor.

42 CFR 102.52 - Documentation a vaccinia contact must submit to be deemed eligible by the Secretary.

Code of Federal Regulations, 2010 CFR

2010-10-01

... OF HEALTH AND HUMAN SERVICES VACCINES SMALLPOX COMPENSATION PROGRAM Required Documentation To Be... in § 102.3(x)(1)-(3) (a person meeting the definition of a smallpox vaccine recipient, except for the... individual described in § 102.3(x)(1)-(3) (a person meeting the definition of a smallpox vaccine recipient...

Standardized End Point Definitions for Coronary Intervention Trials: The Academic Research Consortium-2 Consensus Document.

PubMed

Garcia-Garcia, Hector M; McFadden, Eugène P; Farb, Andrew; Mehran, Roxana; Stone, Gregg W; Spertus, John; Onuma, Yoshinobu; Morel, Marie-Angèle; van Es, Gerrit-Anne; Zuckerman, Bram; Fearon, William F; Taggart, David; Kappetein, Arie-Pieter; Krucoff, Mitchell W; Vranckx, Pascal; Windecker, Stephan; Cutlip, Donald; Serruys, Patrick W

2018-06-14

The Academic Research Consortium (ARC)-2 initiative revisited the clinical and angiographic end point definitions in coronary device trials, proposed in 2007, to make them more suitable for use in clinical trials that include increasingly complex lesion and patient populations and incorporate novel devices such as bioresorbable vascular scaffolds. In addition, recommendations for the incorporation of patient-related outcomes in clinical trials are proposed. Academic Research Consortium-2 is a collaborative effort between academic research organizations in the United States and Europe, device manufacturers, and European, US, and Asian regulatory bodies. Several in-person meetings were held to discuss the changes that have occurred in the device landscape and in clinical trials and regulatory pathways in the last decade. The consensus-based end point definitions in this document are endorsed by the stakeholders of this document and strongly advocated for clinical trial purposes. This Academic Research Consortium-2 document provides further standardization of end point definitions for coronary device trials, incorporating advances in technology and knowledge. Their use will aid interpretation of trial outcomes and comparison among studies, thus facilitating the evaluation of the safety and effectiveness of these devices.

The theory of interface slicing

NASA Technical Reports Server (NTRS)

Beck, Jon

1993-01-01

Interface slicing is a new tool which was developed to facilitate reuse-based software engineering, by addressing the following problems, needs, and issues: (1) size of systems incorporating reused modules; (2) knowledge requirements for program modification; (3) program understanding for reverse engineering; (4) module granularity and domain management; and (5) time and space complexity of conventional slicing. The definition of a form of static program analysis called interface slicing is addressed.

Real-Time Distributed Algorithms for Visual and Battlefield Reasoning

DTIC Science & Technology

2006-08-01

High-Level Task Definition Language, Graphical User Interface (GUI), Story Analysis, Story Interpretation, SensIT Nodes 16. SECURITY...or more actions to be taken in the event the conditions are satisfied. We developed graphical user interfaces that may be used to express such...actions to be taken in the event the conditions are satisfied. We developed graphical user interfaces that may be used to express such task

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chao, Tian-Jy; Kim, Younghun

An end-to-end interoperability and workflows from building architecture design to one or more simulations, in one aspect, may comprise establishing a BIM enablement platform architecture. A data model defines data entities and entity relationships for enabling the interoperability and workflows. A data definition language may be implemented that defines and creates a table schema of a database associated with the data model. Data management services and/or application programming interfaces may be implemented for interacting with the data model. Web services may also be provided for interacting with the data model via the Web. A user interface may be implemented thatmore » communicates with users and uses the BIM enablement platform architecture, the data model, the data definition language, data management services and application programming interfaces to provide functions to the users to perform work related to building information management.« less

Common software and interface for different helmet-mounted display (HMD) aircraft symbology sets

NASA Astrophysics Data System (ADS)

Mulholland, Fred F.

2000-06-01

Different aircraft in different services and countries have their own set of symbology they want displayed on their HMD. Even as flight symbolgy is standardized, there will still be some differences for types of aircraft, different weapons, different sensors, and different countries. As an HMD supplier, we want to provide a system that can be used across all these applications with no changes in the system, including no changes in the software. This HMD system must also provide the flexibility to accommodate new symbology as it is developed over the years, again, with no change in the HMD software. VSI has developed their HMD software to accommodate F-15, F- 16, F-18, and F-22 symbology sets for the Joint Helmet Mounted Cueing System. It also has the flexibility to accommodate the aircraft types and services of the Joint Strike Fighter: Conventional Takeoff and Landing variant for the USAF, Carrier-based Variant for the USN, and the Short Takeoff and Vertical Landing variant for the USMC and U.K. Royal Navy and Air Force. The key to this flexibility is the interface definition. The interface parameters are established at power-on with the download of an interface definition data set. This data set is used to interpret symbology commands from the aircraft OFP during operation and provide graphic commands to the HMD software. This presentation will define the graphics commands, provide an example of how the interface definition data set is defined, and then show how symbology commands produce a display.

14 CFR 77.2 - Definition of terms.

Code of Federal Regulations, 2010 CFR

2010-01-01

... planning document or military service military airport planning document. Precision instrument runway means... military airport layout plan; any other FAA planning document, or military service military airport planning document. Utility runway means a runway that is constructed for and intended to be used by...

Differences in reporting of analyses in internal company documents versus published trial reports: comparisons in industry-sponsored trials in off-label uses of gabapentin.

PubMed

Vedula, S Swaroop; Li, Tianjing; Dickersin, Kay

2013-01-01

Details about the type of analysis (e.g., intent to treat [ITT]) and definitions (i.e., criteria for including participants in the analysis) are necessary for interpreting a clinical trial's findings. Our objective was to compare the description of types of analyses and criteria for including participants in the publication (i.e., what was reported) with descriptions in the corresponding internal company documents (i.e., what was planned and what was done). Trials were for off-label uses of gabapentin sponsored by Pfizer and Parke-Davis, and documents were obtained through litigation. For each trial, we compared internal company documents (protocols, statistical analysis plans, and research reports, all unpublished), with publications. One author extracted data and another verified, with a third person verifying discordant items and a sample of the rest. Extracted data included the number of participants randomized and analyzed for efficacy, and types of analyses for efficacy and safety and their definitions (i.e., criteria for including participants in each type of analysis). We identified 21 trials, 11 of which were published randomized controlled trials, and that provided the documents needed for planned comparisons. For three trials, there was disagreement on the number of randomized participants between the research report and publication. Seven types of efficacy analyses were described in the protocols, statistical analysis plans, and publications, including ITT and six others. The protocol or publication described ITT using six different definitions, resulting in frequent disagreements between the two documents (i.e., different numbers of participants were included in the analyses). Descriptions of analyses conducted did not agree between internal company documents and what was publicly reported. Internal company documents provide extensive documentation of methods planned and used, and trial findings, and should be publicly accessible. Reporting standards for randomized controlled trials should recommend transparent descriptions and definitions of analyses performed and which study participants are excluded.

75 FR 3901 - Announcement of IS-GPS-200E Interface Control Working Group (ICWG) Teleconference Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-25

... will be hosting an Interface Control Working Group (ICWG) teleconference meeting for the document IS... DEPARTMENT OF DEFENSE Department of the Air Force Announcement of IS-GPS-200E Interface Control Working Group (ICWG) Teleconference Meeting AGENCY: Department of the Air Force, DoD. ACTION...

76 FR 35858 - Global Positioning System Directorate (GPSD); Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-20

...); Notice of Meeting ACTION: Notice of Meeting--Public Interface Control Working Group (ICWG) for Signals-in... published a meeting notice on the Public Interface Control Group (ICWG) on June 2, 2011 Vol. 76, No. 106... Interface Control Working Group (ICWG) meeting for the NAVSTAR GPS public signals in space (SiS) documents...

Evaluation of automated decisionmaking methodologies and development of an integrated robotic system simulation, volume 2, part 1. Appendix A: Software documentation

NASA Technical Reports Server (NTRS)

Lowrie, J. W.; Fermelia, A. J.; Haley, D. C.; Gremban, K. D.; Vanbaalen, J.; Walsh, R. W.

1982-01-01

Documentation of the preliminary software developed as a framework for a generalized integrated robotic system simulation is presented. The program structure is composed of three major functions controlled by a program executive. The three major functions are: system definition, analysis tools, and post processing. The system definition function handles user input of system parameters and definition of the manipulator configuration. The analysis tools function handles the computational requirements of the program. The post processing function allows for more detailed study of the results of analysis tool function executions. Also documented is the manipulator joint model software to be used as the basis of the manipulator simulation which will be part of the analysis tools capability.

Towards the formal specification of the requirements and design of a processor interface unit

NASA Technical Reports Server (NTRS)

Fura, David A.; Windley, Phillip J.; Cohen, Gerald C.

1993-01-01

Work to formally specify the requirements and design of a Processor Interface Unit (PIU), a single-chip subsystem providing memory interface, bus interface, and additional support services for a commercial microprocessor within a fault-tolerant computer system, is described. This system, the Fault-Tolerant Embedded Processor (FTEP), is targeted towards applications in avionics and space requiring extremely high levels of mission reliability, extended maintenance free operation, or both. The approaches that were developed for modeling the PIU requirements and for composition of the PIU subcomponents at high levels of abstraction are described. These approaches were used to specify and verify a nontrivial subset of the PIU behavior. The PIU specification in Higher Order Logic (HOL) is documented in a companion NASA contractor report entitled 'Towards the Formal Specification of the Requirements and Design of a Processor Interfacs Unit - HOL Listings.' The subsequent verification approach and HOL listings are documented in NASA contractor report entitled 'Towards the Formal Verification of the Requirements and Design of a Processor Interface Unit' and NASA contractor report entitled 'Towards the Formal Verification of the Requirements and Design of a Processor Interface Unit - HOL Listings.'

Assessing the Student-Instructional Setting Interface Using an Eco-Behavioral Observation System.

ERIC Educational Resources Information Center

Hendrickson, Jo M.

1992-01-01

An eco-behavioral observation system was developed for use with students with behavior disorders or emotional disturbances. Discussed are the ecosystem definition, the student-instructional setting interface, and the assessment procedure, including evaluation of the quality of academic responding, program evaluation, staff development, and…

A proposed application programming interface for a physical volume repository

NASA Technical Reports Server (NTRS)

Jones, Merritt; Williams, Joel; Wrenn, Richard

1996-01-01

The IEEE Storage System Standards Working Group (SSSWG) has developed the Reference Model for Open Storage Systems Interconnection, Mass Storage System Reference Model Version 5. This document, provides the framework for a series of standards for application and user interfaces to open storage systems. More recently, the SSSWG has been developing Application Programming Interfaces (APIs) for the individual components defined by the model. The API for the Physical Volume Repository is the most fully developed, but work is being done on APIs for the Physical Volume Library and for the Mover also. The SSSWG meets every other month, and meetings are open to all interested parties. The Physical Volume Repository (PVR) is responsible for managing the storage of removable media cartridges and for mounting and dismounting these cartridges onto drives. This document describes a model which defines a Physical Volume Repository, and gives a brief summary of the Application Programming Interface (API) which the IEEE Storage Systems Standards Working Group (SSSWG) is proposing as the standard interface for the PVR.

Towards the formal specification of the requirements and design of a processor interface unit: HOL listings

NASA Technical Reports Server (NTRS)

Fura, David A.; Windley, Phillip J.; Cohen, Gerald C.

1993-01-01

This technical report contains the HOL listings of the specification of the design and major portions of the requirements for a commercially developed processor interface unit (or PIU). The PIU is an interface chip performing memory interface, bus interface, and additional support services for a commercial microprocessor within a fault-tolerant computer system. This system, the Fault-Tolerant Embedded Processor (FTEP), is targeted towards applications in avionics and space requiring extremely high levels of mission reliability, extended maintenance-free operation, or both. This report contains the actual HOL listings of the PIU specification as it currently exists. Section two of this report contains general-purpose HOL theories that support the PIU specification. These theories include definitions for the hardware components used in the PIU, our implementation of bit words, and our implementation of temporal logic. Section three contains the HOL listings for the PIU design specification. Aside from the PIU internal bus (I-Bus), this specification is complete. Section four contains the HOL listings for a major portion of the PIU requirements specification. Specifically, it contains most of the definition for the PIU behavior associated with memory accesses initiated by the local processor.

Space station data system analysis/architecture study. Task 4: System definition report. Appendix

NASA Technical Reports Server (NTRS)

1985-01-01

Appendices to the systems definition study for the space station Data System are compiled. Supplemental information on external interface specification, simulation and modeling, and function design characteristics is presented along with data flow diagrams, a data dictionary, and function allocation matrices.

Interface Control Specification

DOT National Transportation Integrated Search

1996-06-12

The Requirements Specification Document (#9933.04) identifies the overall system level requirements of the Gary-Chicago-Milwaukee (GCM) Corridor Transportation Information Center (C-TIC). This document provides details about the data and control flow...

Bi-directional communication interface for microprocessor-to-system/370

NASA Technical Reports Server (NTRS)

Fischer, J. P.

1981-01-01

The design and operation of a bi-directional communication interface between a microcomputer and the IBM System/370 is documented. The hardware unit interconnects a modem to interface to the S/370, the microcomputer with an EIA I/O port, and a terminal for sending and receiving data from either the microcomputer or the S/370. Also described is the software necessary for the two-way interface. This interface is designed so that no modifications need to be made to the terminal, modem, or microcomputer.

Digitization of medical documents: an X-Windows application for fast scanning.

PubMed

Muñoz, A; Salvador, C H; Gonzalez, M A; Dueñas, A

1992-01-01

This paper deals with digitization, using a commercial scanner, of medical documents as still images for introduction into a computer-based Information System. Document management involves storing, editing and transmission. This task has usually been approached from the perspective of the difficulties posed by radiologic images because of their indisputable qualitative and quantitative significance. However, healthcare activities require the management of many other types of documents and involve the requirements of numerous users. One key to document management will be the availability of a digitizer to deal with the greatest possible number of different types of documents. This paper describes the relevant aspects of documents and the technical specifications that digitizers must fulfill. The concept of document type is introduced as the ideal set of digitizing parameters for a given document. The use of document type parameters can drastically reduce the time the user spends in scanning sessions. Presentation is made of an application based on Unix, X-Windows and OSF/Motif, with a GPIB interface, implemented around the document type concept. Finally, the results of the evaluation of the application are presented, focusing on the user interface, as well as on the viewing of color images in an X-Windows environment and the use of lossy algorithms in the compression of medical images.

Standardized Definitions for Code Verification Test Problems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doebling, Scott William

This document contains standardized definitions for several commonly used code verification test problems. These definitions are intended to contain sufficient information to set up the test problem in a computational physics code. These definitions are intended to be used in conjunction with exact solutions to these problems generated using Exact- Pack, www.github.com/lanl/exactpack.

Matlab-Excel Interface for OpenDSS

DOE Office of Scientific and Technical Information (OSTI.GOV)

The software allows users of the OpenDSS grid modeling software to access their load flow models using a GUI interface developed in MATLAB. The circuit definitions are entered into a Microsoft Excel spreadsheet which makes circuit creation and editing a much simpler process than the basic text-based editors used in the native OpenDSS interface. Plot tools have been developed which can be accessed through a MATLAB GUI once the desired parameters have been simulated.

36 CFR 220.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... environmental impact statement (EIS) or environmental assessment (EA). Decision notice. A concise written record... ENVIRONMENTAL POLICY ACT (NEPA) COMPLIANCE § 220.3 Definitions. The following definitions supplement, by adding... about natural resource systems is sometimes uncertain. Decision document. A record of decision, decision...

WikiHyperGlossary (WHG): an information literacy technology for chemistry documents.

PubMed

Bauer, Michael A; Berleant, Daniel; Cornell, Andrew P; Belford, Robert E

2015-01-01

The WikiHyperGlossary is an information literacy technology that was created to enhance reading comprehension of documents by connecting them to socially generated multimedia definitions as well as semantically relevant data. The WikiHyperGlossary enhances reading comprehension by using the lexicon of a discipline to generate dynamic links in a document to external resources that can provide implicit information the document did not explicitly provide. Currently, the most common method to acquire additional information when reading a document is to access a search engine and browse the web. This may lead to skimming of multiple documents with the novice actually never returning to the original document of interest. The WikiHyperGlossary automatically brings information to the user within the current document they are reading, enhancing the potential for deeper document understanding. The WikiHyperGlossary allows users to submit a web URL or text to be processed against a chosen lexicon, returning the document with tagged terms. The selection of a tagged term results in the appearance of the WikiHyperGlossary Portlet containing a definition, and depending on the type of word, tabs to additional information and resources. Current types of content include multimedia enhanced definitions, ChemSpider query results, 3D molecular structures, and 2D editable structures connected to ChemSpider queries. Existing glossaries can be bulk uploaded, locked for editing and associated with multiple social generated definitions. The WikiHyperGlossary leverages both social and semantic web technologies to bring relevant information to a document. This can not only aid reading comprehension, but increases the users' ability to obtain additional information within the document. We have demonstrated a molecular editor enabled knowledge framework that can result in a semantic web inductive reasoning process, and integration of the WikiHyperGlossary into other software technologies, like the Jikitou Biomedical Question and Answer system. Although this work was developed in the chemical sciences and took advantage of open science resources and initiatives, the technology is extensible to other knowledge domains. Through the DeepLit (Deeper Literacy: Connecting Documents to Data and Discourse) startup, we seek to extend WikiHyperGlossary technologies to other knowledge domains, and integrate them into other knowledge acquisition workflows.

Factors affecting physicians' use of a dedicated overview interface in an electronic health record: The importance of standard information and standard documentation.

PubMed

Jensen, Lotte Groth; Bossen, Claus

2016-03-01

It remains a continual challenge to present information in user interfaces in large IT systems to support overview in the best possible way. We here examine how an electronic health record (EHR) supports the creation of overview among hospital physicians with a particular focus on the use of an interface designed to provide clinicians with a patient information overview. The overview interface integrates information flexibly from diverse places in the EHR and presents this information in one screen display. Our study revealed widespread non-use of the overview interface. We explore the reasons for its use and non-use. We conducted exploratory ethnographic fieldwork among physicians in two hospitals and gathered statistical data on their use of the overview interface. From the quantitative data, we identified where the interface was used most and conducted 18 semi-structured, open-ended interviews framed by the theoretical framework and the findings of the initial ethnographic fieldwork. We interviewed both physicians and employees from the IT units in different hospitals. We then analysed notes from the ethnographic fieldwork and the interviews and ordered these into themes forming the basis for the presentation of findings. The overview interface was most used in departments or situations where the problem at hand and the need for information could be standardized-in particular, in anesthesiological departments and outpatient clinics. However, departments with complex and long patient histories did not make much use of the overview interface. Design and layout were not mentioned as decisive factors affecting its use or non-use. Many physicians questioned the completeness of data in the overview interface-either because they were skeptical about the hospital's or the department's documentation practices, or because they could not recognize the structure of the interface. This uncertainty discouraged physicians from using the overview interface. Dedicating a specific function or interface to supporting overview works best where information needs can be standardized. The narrative and contextual nature of creating clinical overview is unlikely to be optimally supported by using the overview interface alone. The use of these kinds of interfaces requires trust in data completeness and other clinicians' and administrative staff's documentation practices, as well as an understanding of the underlying structure of the EHR and how information is filtered when data are aggregated for the interface. Copyright © 2015. Published by Elsevier Ireland Ltd.

Computer software documentation

NASA Technical Reports Server (NTRS)

Comella, P. A.

1973-01-01

A tutorial in the documentation of computer software is presented. It presents a methodology for achieving an adequate level of documentation as a natural outgrowth of the total programming effort commencing with the initial problem statement and definition and terminating with the final verification of code. It discusses the content of adequate documentation, the necessity for such documentation and the problems impeding achievement of adequate documentation.

Fort Hood Solar Total Energy Project. Volume II. Preliminary design. Part 1. System criteria and design description. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None,

1979-01-01

This volume documents the preliminary design developed for the Solar Total Energy System to be installed at Fort Hood, Texas. Current system, subsystem, and component designs are described and additional studies which support selection among significant design alternatives are presented. Overall system requirements which form the system design basis are presented. These include program objectives; performance and output load requirements; industrial, statutory, and regulatory standards; and site interface requirements. Material in this section will continue to be issued separately in the Systems Requirements Document and maintained current through revision throughout future phases of the project. Overall system design and detailedmore » subsystem design descriptions are provided. Consideration of operation and maintenance is reflected in discussion of each subsystem design as well as in an integrated overall discussion. Included are the solar collector subsystem; the thermal storage subsystem, the power conversion sybsystem (including electrical generation and distribution); the heating/cooling and domestic hot water subsystems; overall instrumentation and control; and the STES building and physical plant. The design of several subsystems has progressed beyond the preliminary stage; descriptions for such subsystems are therefore provided in more detail than others to provide complete documentation of the work performed. In some cases, preliminary design parameters require specific verificaton in the definitive design phase and are identified in the text. Subsystem descriptions will continue to be issued and revised separately to maintain accuracy during future phases of the project. (WHK)« less

Bridging the guideline implementation gap: a systematic, document-centered approach to guideline implementation.

PubMed

Shiffman, Richard N; Michel, George; Essaihi, Abdelwaheb; Thornquist, Elizabeth

2004-01-01

A gap exists between the information contained in published clinical practice guidelines and the knowledge and information that are necessary to implement them. This work describes a process to systematize and make explicit the translation of document-based knowledge into workflow-integrated clinical decision support systems. This approach uses the Guideline Elements Model (GEM) to represent the guideline knowledge. Implementation requires a number of steps to translate the knowledge contained in guideline text into a computable format and to integrate the information into clinical workflow. The steps include: (1) selection of a guideline and specific recommendations for implementation, (2) markup of the guideline text, (3) atomization, (4) deabstraction and (5) disambiguation of recommendation concepts, (6) verification of rule set completeness, (7) addition of explanations, (8) building executable statements, (9) specification of origins of decision variables and insertions of recommended actions, (10) definition of action types and selection of associated beneficial services, (11) choice of interface components, and (12) creation of requirement specification. The authors illustrate these component processes using examples drawn from recent experience translating recommendations from the National Heart, Lung, and Blood Institute's guideline on management of chronic asthma into a workflow-integrated decision support system that operates within the Logician electronic health record system. Using the guideline document as a knowledge source promotes authentic translation of domain knowledge and reduces the overall complexity of the implementation task. From this framework, we believe that a better understanding of activities involved in guideline implementation will emerge.

maxdLoad2 and maxdBrowse: standards-compliant tools for microarray experimental annotation, data management and dissemination.

PubMed

Hancock, David; Wilson, Michael; Velarde, Giles; Morrison, Norman; Hayes, Andrew; Hulme, Helen; Wood, A Joseph; Nashar, Karim; Kell, Douglas B; Brass, Andy

2005-11-03

maxdLoad2 is a relational database schema and Java application for microarray experimental annotation and storage. It is compliant with all standards for microarray meta-data capture; including the specification of what data should be recorded, extensive use of standard ontologies and support for data exchange formats. The output from maxdLoad2 is of a form acceptable for submission to the ArrayExpress microarray repository at the European Bioinformatics Institute. maxdBrowse is a PHP web-application that makes contents of maxdLoad2 databases accessible via web-browser, the command-line and web-service environments. It thus acts as both a dissemination and data-mining tool. maxdLoad2 presents an easy-to-use interface to an underlying relational database and provides a full complement of facilities for browsing, searching and editing. There is a tree-based visualization of data connectivity and the ability to explore the links between any pair of data elements, irrespective of how many intermediate links lie between them. Its principle novel features are: the flexibility of the meta-data that can be captured, the tools provided for importing data from spreadsheets and other tabular representations, the tools provided for the automatic creation of structured documents, the ability to browse and access the data via web and web-services interfaces. Within maxdLoad2 it is very straightforward to customise the meta-data that is being captured or change the definitions of the meta-data. These meta-data definitions are stored within the database itself allowing client software to connect properly to a modified database without having to be specially configured. The meta-data definitions (configuration file) can also be centralized allowing changes made in response to revisions of standards or terminologies to be propagated to clients without user intervention.maxdBrowse is hosted on a web-server and presents multiple interfaces to the contents of maxd databases. maxdBrowse emulates many of the browse and search features available in the maxdLoad2 application via a web-browser. This allows users who are not familiar with maxdLoad2 to browse and export microarray data from the database for their own analysis. The same browse and search features are also available via command-line and SOAP server interfaces. This both enables scripting of data export for use embedded in data repositories and analysis environments, and allows access to the maxd databases via web-service architectures. maxdLoad2 http://www.bioinf.man.ac.uk/microarray/maxd/ and maxdBrowse http://dbk.ch.umist.ac.uk/maxdBrowse are portable and compatible with all common operating systems and major database servers. They provide a powerful, flexible package for annotation of microarray experiments and a convenient dissemination environment. They are available for download and open sourced under the Artistic License.

End-to-end interoperability and workflows from building architecture design to one or more simulations

DOEpatents

Chao, Tian-Jy; Kim, Younghun

2015-02-10

An end-to-end interoperability and workflows from building architecture design to one or more simulations, in one aspect, may comprise establishing a BIM enablement platform architecture. A data model defines data entities and entity relationships for enabling the interoperability and workflows. A data definition language may be implemented that defines and creates a table schema of a database associated with the data model. Data management services and/or application programming interfaces may be implemented for interacting with the data model. Web services may also be provided for interacting with the data model via the Web. A user interface may be implemented that communicates with users and uses the BIM enablement platform architecture, the data model, the data definition language, data management services and application programming interfaces to provide functions to the users to perform work related to building information management.

48 CFR 4.301 - Definition.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Definition. 4.301 Section 4.301 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL ADMINISTRATIVE MATTERS Paper Documents 4.301 Definition. Printed or copied double-sided, as used in this subpart, means...

48 CFR 4.301 - Definition.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Definition. 4.301 Section 4.301 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL ADMINISTRATIVE MATTERS Paper Documents 4.301 Definition. Printed or copied double-sided, as used in this subpart, means...

48 CFR 4.301 - Definition.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 1 2014-10-01 2014-10-01 false Definition. 4.301 Section 4.301 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL ADMINISTRATIVE MATTERS Paper Documents 4.301 Definition. Printed or copied double-sided, as used in this subpart, means...

48 CFR 4.301 - Definition.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Definition. 4.301 Section 4.301 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL ADMINISTRATIVE MATTERS Paper Documents 4.301 Definition. Printed or copied double-sided, as used in this subpart, means...

48 CFR 4.301 - Definition.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 1 2012-10-01 2012-10-01 false Definition. 4.301 Section 4.301 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL ADMINISTRATIVE MATTERS Paper Documents 4.301 Definition. Printed or copied double-sided, as used in this subpart, means...

30 CFR 250.200 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... OPERATIONS IN THE OUTER CONTINENTAL SHELF Plans and Information General Information § 250.200 Definitions... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Definitions. 250.200 Section 250.200 Mineral... subpart are listed alphabetically below: CID means Conservation Information Document CZMA means Coastal...

Remediation Optimization: Definition, Scope and Approach

EPA Pesticide Factsheets

This document provides a general definition, scope and approach for conducting optimization reviews within the Superfund Program and includes the fundamental principles and themes common to optimization.

Standardized End Point Definitions for Coronary Intervention Trials: The Academic Research Consortium-2 Consensus Document.

PubMed

Garcia-Garcia, Hector M; McFadden, Eugène P; Farb, Andrew; Mehran, Roxana; Stone, Gregg W; Spertus, John; Onuma, Yoshinobu; Morel, Marie-Angèle; van Es, Gerrit-Anne; Zuckerman, Bram; Fearon, William F; Taggart, David; Kappetein, Arie-Pieter; Krucoff, Mitchell W; Vranckx, Pascal; Windecker, Stephan; Cutlip, Donald; Serruys, Patrick W

2018-06-12

The Academic Research Consortium (ARC)-2 initiative revisited the clinical and angiographic end point definitions in coronary device trials, proposed in 2007, to make them more suitable for use in clinical trials that include increasingly complex lesion and patient populations and incorporate novel devices such as bioresorbable vascular scaffolds. In addition, recommendations for the incorporation of patient-related outcomes in clinical trials are proposed. Academic Research Consortium-2 is a collaborative effort between academic research organizations in the United States and Europe, device manufacturers, and European, US, and Asian regulatory bodies. Several in-person meetings were held to discuss the changes that have occurred in the device landscape and in clinical trials and regulatory pathways in the last decade. The consensus-based end point definitions in this document are endorsed by the stakeholders of this document and strongly advocated for clinical trial purposes. This Academic Research Consortium-2 document provides further standardization of end point definitions for coronary device trials, incorporating advances in technology and knowledge. Their use will aid interpretation of trial outcomes and comparison among studies, thus facilitating the evaluation of the safety and effectiveness of these devices. © 2018 American Heart Association, Inc., and European Society of Cardiology.

77 FR 39388 - Removal of Category IIIa, IIIb, and IIIc Definitions; Confirmation of Effective Date and Response...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-03

...- AK03 Removal of Category IIIa, IIIb, and IIIc Definitions; Confirmation of Effective Date and Response... received on that direct final rule. In that document, the FAA proposed to remove the definitions of Category IIIa, IIIb, and IIIc operations because the definitions are outdated and no longer used for...

4 CFR 201.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 4 Accounts 1 2010-01-01 2010-01-01 false Definitions. 201.2 Section 201.2 Accounts RECOVERY ACCOUNTABILITY AND TRANSPARENCY BOARD PUBLIC INFORMATION AND REQUESTS § 201.2 Definitions. For words used in this document, unless the context indicates otherwise, singular includes the plural, plural includes the...

22 CFR 41.0 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Definitions. 41.0 Section 41.0 Foreign Relations DEPARTMENT OF STATE VISAS VISAS: DOCUMENTATION OF NONIMMIGRANTS UNDER THE IMMIGRATION AND NATIONALITY ACT, AS AMENDED Passport and Visas Not Required for Certain Nonimmigrants § 41.0 Definitions. For...

22 CFR 41.0 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Definitions. 41.0 Section 41.0 Foreign Relations DEPARTMENT OF STATE VISAS VISAS: DOCUMENTATION OF NONIMMIGRANTS UNDER THE IMMIGRATION AND NATIONALITY ACT, AS AMENDED Passport and Visas Not Required for Certain Nonimmigrants § 41.0 Definitions. For...

22 CFR 41.0 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Definitions. 41.0 Section 41.0 Foreign Relations DEPARTMENT OF STATE VISAS VISAS: DOCUMENTATION OF NONIMMIGRANTS UNDER THE IMMIGRATION AND NATIONALITY ACT, AS AMENDED Passport and Visas Not Required for Certain Nonimmigrants § 41.0 Definitions. For...

22 CFR 41.0 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Definitions. 41.0 Section 41.0 Foreign Relations DEPARTMENT OF STATE VISAS VISAS: DOCUMENTATION OF NONIMMIGRANTS UNDER THE IMMIGRATION AND NATIONALITY ACT, AS AMENDED Passport and Visas Not Required for Certain Nonimmigrants § 41.0 Definitions. For...

22 CFR 41.0 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Definitions. 41.0 Section 41.0 Foreign Relations DEPARTMENT OF STATE VISAS VISAS: DOCUMENTATION OF NONIMMIGRANTS UNDER THE IMMIGRATION AND NATIONALITY ACT, AS AMENDED Passport and Visas Not Required for Certain Nonimmigrants § 41.0 Definitions. For...

Fusion Simulation Program Definition. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cary, John R.

2012-09-05

We have completed our contributions to the Fusion Simulation Program Definition Project. Our contributions were in the overall planning with concentration in the definition of the area of Software Integration and Support. We contributed to the planning of multiple meetings, and we contributed to multiple planning documents.

GKS utilities for FORTRAN-77

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beach, R.C.

1992-01-01

This document describes a number of subroutines that can be useful in GKS graphic applications programmed in FORTRAN-77. The algorithms described here include subroutines to do the following: (1) Draw text characters in a more flexible manner than is possible with basic GKS. (2) Project two-dimensional and three-dimensional space onto two-dimensional space. (3) Draw smooth curves. (4) Draw two-dimensional projections of complex three-dimensional objects. FORTRAN-77 is described in American National Standard, Programming Language, FORTRAN. GKS is described in American National Standard for Information Systems: Computer Graphics -- Graphical Kernel System (GKS) Functional Description and the FORTRAN-77 interface is described inmore » American National Standard for Information Systems: Computer Graphics -- Graphical Kernel System (GKS) FORTRAN Binding. All of the subroutine names and additional enumeration types that will be described in this document begin with the letters ``GZ.`` Since GKS itself does not have any subroutine names or enumeration types that begin with these letters, no confusion between the usual GKS subroutines and the ones described here should occur. Many concepts will have to be defined in the following chapters. When a concept is first encountered, it will be given in italics. The information around the italicized word or phrase may be taken as its definition.« less

GKS utilities for FORTRAN-77

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beach, R.C.

1992-01-01

This document describes a number of subroutines that can be useful in GKS graphic applications programmed in FORTRAN-77. The algorithms described here include subroutines to do the following: (1) Draw text characters in a more flexible manner than is possible with basic GKS. (2) Project two-dimensional and three-dimensional space onto two-dimensional space. (3) Draw smooth curves. (4) Draw two-dimensional projections of complex three-dimensional objects. FORTRAN-77 is described in American National Standard, Programming Language, FORTRAN. GKS is described in American National Standard for Information Systems: Computer Graphics -- Graphical Kernel System (GKS) Functional Description and the FORTRAN-77 interface is described inmore » American National Standard for Information Systems: Computer Graphics -- Graphical Kernel System (GKS) FORTRAN Binding. All of the subroutine names and additional enumeration types that will be described in this document begin with the letters GZ.'' Since GKS itself does not have any subroutine names or enumeration types that begin with these letters, no confusion between the usual GKS subroutines and the ones described here should occur. Many concepts will have to be defined in the following chapters. When a concept is first encountered, it will be given in italics. The information around the italicized word or phrase may be taken as its definition.« less

Abort-once-around entry corridor analysis program document

NASA Technical Reports Server (NTRS)

Kyle, H. C.

1975-01-01

The abort once around entry target corridor analysis program (ABECAP) was studied. The allowable range of flight path angles at entry interface for acceptable entry trajectories from a shuttle abort once around (AOA) situation was established. The solutions thus determined may be shown as corridor plots of entry interface flight path angle versus range from entry interface (EI) to the target.

How NASA KSC Controls Interfaces with the use of Motion Skeletons and Product Structure

NASA Technical Reports Server (NTRS)

Jones, Corey

2013-01-01

This presentation will show how NASA KSC controls interfaces for Modular Product Architecture (MPA) using Locator Skeletons, Interface Skeletons, and Product Structure, to be combined together within a Motion Skeleton. The user will learn how to utilize skeleton models to communicate interface data, as successfully done at NASA KSC in their use of Motion Skeletons to control interfaces for multi-launch systems. There will be discussion of the methodology used to control design requirements through WTParts, and how to utilize product structure for non-CAD documents.

Developing the Multimedia User Interface Component (MUSIC) for the Icarus Presentation System (IPS)

DTIC Science & Technology

1993-12-01

AD-A276 341 In-House Report December 1993 DEVELOPING THE MULTIMEDIA USER INTERFACE COMPONENT ( MUSIC ) FOR THE ICARUS PRESENTATION SYSTEM (IPS) Ingrid...DATEs COVERED 7 December 1993 Ina-House Jun - Aug 93 4 TWLE AM SL1sM1E & FUNDING NUMBERS DEVELOPING THE MULTIMEDIA USER INTERFACE COMPONENT ( MUSIC ) PE...the Multimedia User Interface Component ( MUSIC ). This report documents the initial research, design and implementation of a prototype of the MUSIC

A Climatology of Nocturnal-Convection Initiation Over the Central Great Plains

NASA Astrophysics Data System (ADS)

Reif, D. W.; Bluestein, H. B.

2015-12-01

A nocturnal maximum in rainfall and thunderstorm activity over the central Great Plains is widely documented, but the mechanisms for understanding the development of thunderstorms over the region at night are still not well understood. Elevated convection, defined by Colman (1990) as storms formed through ascent above frontal surfaces, is one explanation, but our study shows that many thunderstorms can initiate at night without the presence of an elevated frontal inversion or nearby surface boundary. We address the following questions: Of all the events documented, what percentage fall under this definition of elevated convection, and what percentage fall outside of that definition? How do characteristics differ among the events that fall under that definition and the events that fall outside that definition? This study documents convection initiation (CI) events occurring at night over the central Great Plains from 1996 through 2014 during the months of April through July. Storm characteristics such as storm type (defined as linear, areal, or single cell), storm motion, initiation time and location, and others were documented. Once all of the cases were documented, surface data were examined to locate any nearby surface boundaries. The event's location relative to these boundaries (if they existed) was documented. Three main modes of CI were identified: formation on a surface boundary, formation on the cold side of a surface boundary, and formation without the presence of a surface boundary. A climatology of these events will be presented. There are many differences among the different modes of CI at night. One result is that there appears to be two main peaks of CI time at night: one early at night and one later at night. The later peak is likely due to the events that form in the absence of a nearby surface boundary.

Tags Extarction from Spatial Documents in Search Engines

NASA Astrophysics Data System (ADS)

Borhaninejad, S.; Hakimpour, F.; Hamzei, E.

2015-12-01

Nowadays the selective access to information on the Web is provided by search engines, but in the cases which the data includes spatial information the search task becomes more complex and search engines require special capabilities. The purpose of this study is to extract the information which lies in spatial documents. To that end, we implement and evaluate information extraction from GML documents and a retrieval method in an integrated approach. Our proposed system consists of three components: crawler, database and user interface. In crawler component, GML documents are discovered and their text is parsed for information extraction; storage. The database component is responsible for indexing of information which is collected by crawlers. Finally the user interface component provides the interaction between system and user. We have implemented this system as a pilot system on an Application Server as a simulation of Web. Our system as a spatial search engine provided searching capability throughout the GML documents and thus an important step to improve the efficiency of search engines has been taken.

Protein interface classification by evolutionary analysis

PubMed Central

2012-01-01

Background Distinguishing biologically relevant interfaces from lattice contacts in protein crystals is a fundamental problem in structural biology. Despite efforts towards the computational prediction of interface character, many issues are still unresolved. Results We present here a protein-protein interface classifier that relies on evolutionary data to detect the biological character of interfaces. The classifier uses a simple geometric measure, number of core residues, and two evolutionary indicators based on the sequence entropy of homolog sequences. Both aim at detecting differential selection pressure between interface core and rim or rest of surface. The core residues, defined as fully buried residues (>95% burial), appear to be fundamental determinants of biological interfaces: their number is in itself a powerful discriminator of interface character and together with the evolutionary measures it is able to clearly distinguish evolved biological contacts from crystal ones. We demonstrate that this definition of core residues leads to distinctively better results than earlier definitions from the literature. The stringent selection and quality filtering of structural and sequence data was key to the success of the method. Most importantly we demonstrate that a more conservative selection of homolog sequences - with relatively high sequence identities to the query - is able to produce a clearer signal than previous attempts. Conclusions An evolutionary approach like the one presented here is key to the advancement of the field, which so far was missing an effective method exploiting the evolutionary character of protein interfaces. Its coverage and performance will only improve over time thanks to the incessant growth of sequence databases. Currently our method reaches an accuracy of 89% in classifying interfaces of the Ponstingl 2003 datasets and it lends itself to a variety of useful applications in structural biology and bioinformatics. We made the corresponding software implementation available to the community as an easy-to-use graphical web interface at http://www.eppic-web.org. PMID:23259833

Reflections on Documentation: A Discussion with Thought Leaders from Reggio Emilia

ERIC Educational Resources Information Center

Turner, Terri; Wilson, Daniel Gray

2010-01-01

This article presents the voices of three central thinkers in the documentation movement in a round-table discussion that explores the key questions regarding the definition of documentation, common misunderstandings of the strategy, lessons that have emerged over decades of documenting in various contexts, and puzzles that are emerging for the…

Space Telecommunications Radio System (STRS) Definitions and Acronyms

NASA Technical Reports Server (NTRS)

Briones, Janette C.; Handler, Louis M.; Johnson, Sandra K.; Nappier, Jennifer; Gnepp, Steven; Kacpura, Thomas J.; Reinhart, Richard C.; Hall, Charles S.; Mortensen, Dale

2008-01-01

Software-defined radio is a relatively new technology area, and industry consensus on terminology is not always consistent. Confusion exists when the various organizations and standards bodies define different radio terms associated with the actual amount of reconfigurability of the radios. The Space Telecommunications Radio System (STRS) Definitions and Acronyms Document provides the readers of the STRS documents a common understanding of the terminology used and how they will be applied to the STRS architecture.

Ada/POSIX binding: A focused Ada investigation

NASA Technical Reports Server (NTRS)

Legrand, Sue

1988-01-01

NASA is seeking an operating system interface definition (OSID) for the Space Station Program (SSP) in order to take advantage of the commercial off-the-shelf (COTS) products available today and the many that are expected in the future. NASA would also like to avoid the reliance on any one source for operating systems, information system, communication system, or instruction set architecture. The use of the Portable Operating System Interface for Computer Environments (POSIX) is examined as a possible solution to this problem. Since Ada is already the language of choice for SSP, the question of an Ada/POSIX binding is addressed. The intent of the binding is to provide access to the POSIX standard operation system (OS) interface and environment, by which application portability of Ada applications will be supported at the source code level. A guiding principle of Ada/POSIX binding development is a clear conformance of the Ada interface with the functional definition of POSIX. The interface is intended to be used by both application developers and system implementors. The objective is to provide a standard that allows a strictly conforming application source program that can be compiled to execute on any conforming implementation. Special emphasis is placed on first providing those functions and facilities that are needed in a wide variety of commercial applications

Differences in Reporting of Analyses in Internal Company Documents Versus Published Trial Reports: Comparisons in Industry-Sponsored Trials in Off-Label Uses of Gabapentin

PubMed Central

Vedula, S. Swaroop; Li, Tianjing; Dickersin, Kay

2013-01-01

Background Details about the type of analysis (e.g., intent to treat [ITT]) and definitions (i.e., criteria for including participants in the analysis) are necessary for interpreting a clinical trial's findings. Our objective was to compare the description of types of analyses and criteria for including participants in the publication (i.e., what was reported) with descriptions in the corresponding internal company documents (i.e., what was planned and what was done). Trials were for off-label uses of gabapentin sponsored by Pfizer and Parke-Davis, and documents were obtained through litigation. Methods and Findings For each trial, we compared internal company documents (protocols, statistical analysis plans, and research reports, all unpublished), with publications. One author extracted data and another verified, with a third person verifying discordant items and a sample of the rest. Extracted data included the number of participants randomized and analyzed for efficacy, and types of analyses for efficacy and safety and their definitions (i.e., criteria for including participants in each type of analysis). We identified 21 trials, 11 of which were published randomized controlled trials, and that provided the documents needed for planned comparisons. For three trials, there was disagreement on the number of randomized participants between the research report and publication. Seven types of efficacy analyses were described in the protocols, statistical analysis plans, and publications, including ITT and six others. The protocol or publication described ITT using six different definitions, resulting in frequent disagreements between the two documents (i.e., different numbers of participants were included in the analyses). Conclusions Descriptions of analyses conducted did not agree between internal company documents and what was publicly reported. Internal company documents provide extensive documentation of methods planned and used, and trial findings, and should be publicly accessible. Reporting standards for randomized controlled trials should recommend transparent descriptions and definitions of analyses performed and which study participants are excluded. Please see later in the article for the Editors' Summary PMID:23382656

An adaptive simplex cut-cell method for high-order discontinuous Galerkin discretizations of elliptic interface problems and conjugate heat transfer problems

NASA Astrophysics Data System (ADS)

Sun, Huafei; Darmofal, David L.

2014-12-01

In this paper we propose a new high-order solution framework for interface problems on non-interface-conforming meshes. The framework consists of a discontinuous Galerkin (DG) discretization, a simplex cut-cell technique, and an output-based adaptive scheme. We first present a DG discretization with a dual-consistent output evaluation for elliptic interface problems on interface-conforming meshes, and then extend the method to handle multi-physics interface problems, in particular conjugate heat transfer (CHT) problems. The method is then applied to non-interface-conforming meshes using a cut-cell technique, where the interface definition is completely separate from the mesh generation process. No assumption is made on the interface shape (other than Lipschitz continuity). We then equip our strategy with an output-based adaptive scheme for an accurate output prediction. Through numerical examples, we demonstrate high-order convergence for elliptic interface problems and CHT problems with both smooth and non-smooth interface shapes.

50 CFR 600.750 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... concurrence; or (2) agrees upon another specified definition. Fishery negotiation panel (FNP) means an... affected in a similar manner. Report means a document submitted by an FNP in accordance with the Magnuson...

48 CFR 211.275-1 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Documents 211.275-1 Definitions. Bulk commodities, case, palletized unit load, passive RFID tag, and radio frequency identification are defined in the clause at 252.211-7006, Passive Radio Frequency Identification...

14 CFR 16.3 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

.... Unless otherwise noted, mail also means electronic mail containing PDF copies of pleadings or documents... § 16.1 and any regulation, agreement, or document of conveyance issued or made under that statute... Civil Rights. Complainant means the person submitting a complaint. Complaint means a written document...

US NDC Modernization Iteration E1 Prototyping Report: User Interface Framework

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lober, Randall R.

2014-12-01

During the first iteration of the US NDC Modernization Elaboration phase (E1), the SNL US NDC modernization project team completed an initial survey of applicable COTS solutions, and established exploratory prototyping related to the User Interface Framework (UIF) in support of system architecture definition. This report summarizes these activities and discusses planned follow-on work.

US NDC Modernization Iteration E1 Prototyping Report: Common Object Interface

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lewis, Jennifer E.; Hess, Michael M.

2014-12-01

During the first iteration of the US NDC Modernization Elaboration phase (E1), the SNL US NDC modernization project team completed an initial survey of applicable COTS solutions, and established exploratory prototyping related to the Common Object Interface (COI) in support of system architecture definition. This report summarizes these activities and discusses planned follow-on work.

MHD modelling of the heliospheric interface

NASA Astrophysics Data System (ADS)

Ratkiewicz, R.

The thin layer approximation (TLA) is used to ascertain the effect of the IMF on the heliospheric interface. The TLA approach can be used in considering properties of the solar wind termination shock, since by definition both curves are close to each other. Good agreement is obtained with previous predictions of the solar wind termination shock's shape and distance.

Condition of Mechanical Equilibrium at the Phase Interface with Arbitrary Geometry

NASA Astrophysics Data System (ADS)

Zubkov, V. V.; Zubkova, A. V.

2017-09-01

The authors produced an expression for the mechanical equilibrium condition at the phase interface within the force definition of surface tension. This equilibrium condition is the most general one from the mathematical standpoint and takes into account the three-dimensional aspect of surface tension. Furthermore, the formula produced allows describing equilibrium on the fractal surface of the interface. The authors used the fractional integral model of fractal distribution and took the fractional order integrals over Euclidean space instead of integrating over the fractal set.

Basic Electronic Design for Proposed NMSU Hitchhiker Payload

NASA Technical Reports Server (NTRS)

Horan, Stephen

2000-01-01

This document presents the bas'c hardware design developed by the EE 499 class during the spring semester of the 1999-2000 academic year. This design covers the electrical components to supply power to the experiments, the computer software and interfaces to control the experiments, and the ground data processing to provide an operator interface. This document is a follow-on to the Payload Mission description document and the System Requirements document developed during the EE 498 class during the fall semester. The design activities are broken down by functional area within the structure. For each area, we give the requirements that need to be met and the design to meet the requirements. For each of these areas, a prototype selection of hardware and/or software was done by the class and the components assembled as part of the class to verify that they worked as intended.

Earth Observatory Satellite system definition study. Report 7: EOS system definition report

NASA Technical Reports Server (NTRS)

1974-01-01

The Earth Observatory Satellite (EOS) study is summarized to show the modular design of a general purpose spacecraft, a mission peculiar segment which performs the EOS-A mission, an Operations Control Center, a Data Processing Facility, and a design for Low Cost Readout Stations. The study verified the practicality and feasibility of the modularized spacecraft with the capability of supporting many missions in the Earth Observation spectrum. The various subjects considered in the summary are: (1) orbit/launch vehicle tradeoff studies and recommendations, (2) instrument constraints and interfaces, (3) design/cost tradeoff and recommendations, (4) low cost management approach and recommendations, (5) baseline system description and specifications, and (6) space shuttle utilization and interfaces.

Surface Tension: Mechanics, Thermodynamics, and Relaxation Times

NASA Astrophysics Data System (ADS)

Tovbin, Yu. K.

2018-06-01

A microscopic analysis is presented of the existing definitions of equilibrium surface tension, which can be divided into two types: mechanical and thermodynamic. Each type of definition can be studied from the presentation below according to thermodynamic hypotheses or molecular calculations. An analysis of the planar interface is given and its generalization for curved (spherical) interfaces is considered. The distinction between approaches describing the surface tension of metastable and equilibrium droplets is discussed. Based on nonequilibrium thermodynamics, it is shown that the introduction of metastable droplets is due to a violation of the relationship between the times of impulse and chemical potential relaxation in condensed phases. Problems of calculating the surface tension in nonequilibrium situations are created.

21 CFR 1401.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Definitions. 1401.3 Section 1401.3 Food and Drugs OFFICE OF NATIONAL DRUG CONTROL POLICY PUBLIC AVAILABILITY OF INFORMATION § 1401.3 Definitions. For the... paper, microform, audio-visual materials, or machine-readable documentation. ONDCP will provide a copy...

50 CFR 660.11 - General definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... General definitions. These definitions are specific to the fisheries covered in subparts C through G of..., subpart C; documentation of the weighing of fish relative to the requirements of § 660.13, subpart C; and... contributing to the rebuilding of overfished West Coast groundfish species. Regulations at § 660.70, Subpart C...

Requirements Specification Document

DOT National Transportation Integrated Search

1996-04-26

The System Definition Document identifies the top level processes, data flows, : and system controls for the Gary-Chicago-Milwaukee (GCM) Corridor Transportation Information Center (C-TIC). This Requirements Specification establishes the requirements...

Information visualization: Beyond traditional engineering

NASA Technical Reports Server (NTRS)

Thomas, James J.

1995-01-01

This presentation addresses a different aspect of the human-computer interface; specifically the human-information interface. This interface will be dominated by an emerging technology called Information Visualization (IV). IV goes beyond the traditional views of computer graphics, CADS, and enables new approaches for engineering. IV specifically must visualize text, documents, sound, images, and video in such a way that the human can rapidly interact with and understand the content structure of information entities. IV is the interactive visual interface between humans and their information resources.

ooi: OpenStack OCCI interface

NASA Astrophysics Data System (ADS)

López García, Álvaro; Fernández del Castillo, Enol; Orviz Fernández, Pablo

In this document we present an implementation of the Open Grid Forum's Open Cloud Computing Interface (OCCI) for OpenStack, namely ooi (Openstack occi interface, 2015) [1]. OCCI is an open standard for management tasks over cloud resources, focused on interoperability, portability and integration. ooi aims to implement this open interface for the OpenStack cloud middleware, promoting interoperability with other OCCI-enabled cloud management frameworks and infrastructures. ooi focuses on being non-invasive with a vanilla OpenStack installation, not tied to a particular OpenStack release version.

How to Create, Modify, and Interface Aspen In-House and User Databanks for System Configuration 1:

DOE Office of Scientific and Technical Information (OSTI.GOV)

Camp, D W

2000-10-27

The goal of this document is to provide detailed instructions to create, modify, interface, and test Aspen User and In-House databanks with minimal frustration. The level of instructions are aimed at a novice Aspen Plus simulation user who is neither a programming nor computer-system expert. The instructions are tailored to Version 10.1 of Aspen Plus and the specific computing configuration summarized in the Title of this document and detailed in Section 2. Many details of setting up databanks depend on the computing environment specifics, such as the machines, operating systems, command languages, directory structures, inter-computer communications software, the version ofmore » the Aspen Engine and Graphical User Interface (GUI), and the directory structure of how these were installed.« less

A Method of Retrospective Computerized System Validation for Drug Manufacturing Software Considering Modifications

NASA Astrophysics Data System (ADS)

Takahashi, Masakazu; Fukue, Yoshinori

This paper proposes a Retrospective Computerized System Validation (RCSV) method for Drug Manufacturing Software (DMSW) that relates to drug production considering software modification. Because DMSW that is used for quality management and facility control affects big impact to quality of drugs, regulatory agency required proofs of adequacy for DMSW's functions and performance based on developed documents and test results. Especially, the work that explains adequacy for previously developed DMSW based on existing documents and operational records is called RCSV. When modifying RCSV conducted DMSW, it was difficult to secure consistency between developed documents and test results for modified DMSW parts and existing documents and operational records for non-modified DMSW parts. This made conducting RCSV difficult. In this paper, we proposed (a) definition of documents architecture, (b) definition of descriptive items and levels in the documents, (c) management of design information using database, (d) exhaustive testing, and (e) integrated RCSV procedure. As a result, we could conduct adequate RCSV securing consistency.

29 CFR 1610.1 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... to the request. (h) Attestation refers to the authentication of copies of Commission documents by an... refers to the authentication of copies of Commission documents by an affidavit or unsworn declaration...

Definite Markers, Phi-Features, and Agreement: A Morphosyntactic Investigation of the Amharic DP

ERIC Educational Resources Information Center

Kramer, Ruth

2009-01-01

This dissertation has two inter-related goals: (i) to describe and provide novel analyses of three types of important and difficult phenomena within Amharic DPs and (ii) to explore the properties of the syntax-morphology interface. The core phenomena explicated are the unusual distribution of the definite marker, the gender system (which relies…

Front End Software for Online Database Searching Part 1: Definitions, System Features, and Evaluation.

ERIC Educational Resources Information Center

Hawkins, Donald T.; Levy, Louise R.

1985-01-01

This initial article in series of three discusses barriers inhibiting use of current online retrieval systems by novice users and notes reasons for front end and gateway online retrieval systems. Definitions, front end features, user interface, location (personal computer, host mainframe), evaluation, and strengths and weaknesses are covered. (16…

Feasibility and systems definition study for microwave multi-application payload (MMAP)

NASA Technical Reports Server (NTRS)

Horton, J. B.; Allen, C. C.; Massaro, M. J.; Zemany, J. L.; Murrell, J. W.; Stanhouse, R. W.; Condon, G. P.; Stone, R. F.

1977-01-01

There were three Shuttle/Spacelab experiments: adaptive multibeam phased array antenna (AMPA) experiment, electromagnetic environment experiment (EEE), and millimeter wave communications experiment (MWCE). Work on the AMPA experiment was completed. Results included are definition of operating modes, sequence of operation, radii of operation about several ground stations, signal format, foot prints of typical orbits and preliminary definition of ground and user terminals. Definition of the MOD I EEE included conceptual hardware designs, spacelab interfaces, preliminary data handling methods, experiment tests and verification, and EMC studies. The MWCE was defined conceptually for a steerable high gain antenna.

[Research on tumor information grid framework].

PubMed

Zhang, Haowei; Qin, Zhu; Liu, Ying; Tan, Jianghao; Cao, Haitao; Chen, Youping; Zhang, Ke; Ding, Yuqing

2013-10-01

In order to realize tumor disease information sharing and unified management, we utilized grid technology to make the data and software resources which distributed in various medical institutions for effective integration so that we could make the heterogeneous resources consistent and interoperable in both semantics and syntax aspects. This article describes the tumor grid framework, the type of the service being packaged in Web Service Description Language (WSDL) and extensible markup language schemas definition (XSD), the client use the serialized document to operate the distributed resources. The service objects could be built by Unified Modeling Language (UML) as middle ware to create application programming interface. All of the grid resources are registered in the index and released in the form of Web Services based on Web Services Resource Framework (WSRF). Using the system we can build a multi-center, large sample and networking tumor disease resource sharing framework to improve the level of development in medical scientific research institutions and the patient's quality of life.

The UTCI-clothing model.

PubMed

Havenith, George; Fiala, Dusan; Błazejczyk, Krzysztof; Richards, Mark; Bröde, Peter; Holmér, Ingvar; Rintamaki, Hannu; Benshabat, Yael; Jendritzky, Gerd

2012-05-01

The Universal Thermal Climate Index (UTCI) was conceived as a thermal index covering the whole climate range from heat to cold. This would be impossible without considering clothing as the interface between the person (here, the physiological model of thermoregulation) and the environment. It was decided to develop a clothing model for this application in which the following three factors were considered: (1) typical dressing behaviour in different temperatures, as observed in the field, resulting in a model of the distribution of clothing over the different body segments in relation to the ambient temperature, (2) the changes in clothing insulation and vapour resistance caused by wind and body movement, and (3) the change in wind speed in relation to the height above ground. The outcome was a clothing model that defines in detail the effective clothing insulation and vapour resistance for each of the thermo-physiological model's body segments over a wide range of climatic conditions. This paper details this model's conception and documents its definitions.

The neuron classification problem

PubMed Central

Bota, Mihail; Swanson, Larry W.

2007-01-01

A systematic account of neuron cell types is a basic prerequisite for determining the vertebrate nervous system global wiring diagram. With comprehensive lineage and phylogenetic information unavailable, a general ontology based on structure-function taxonomy is proposed and implemented in a knowledge management system, and a prototype analysis of select regions (including retina, cerebellum, and hypothalamus) presented. The supporting Brain Architecture Knowledge Management System (BAMS) Neuron ontology is online and its user interface allows queries about terms and their definitions, classification criteria based on the original literature and “Petilla Convention” guidelines, hierarchies, and relations—with annotations documenting each ontology entry. Combined with three BAMS modules for neural regions, connections between regions and neuron types, and molecules, the Neuron ontology provides a general framework for physical descriptions and computational modeling of neural systems. The knowledge management system interacts with other web resources, is accessible in both XML and RDF/OWL, is extendible to the whole body, and awaits large-scale data population requiring community participation for timely implementation. PMID:17582506

Crew interface specification development study for in-flight maintenance and stowage functions

NASA Technical Reports Server (NTRS)

Carl, J. G.

1971-01-01

The need and potential solutions for an orderly systems engineering approach to the definition, management and documentation requirements for in-flight maintenance, assembly, servicing, and stowage process activities of the flight crews of future spacecraft were investigated. These processes were analyzed and described using a new technique (mass/function flow diagramming), developed during the study, to give visibility to crew functions and supporting requirements, including data products. This technique is usable by NASA for specification baselines and can assist the designer in identifying both upper and lower level requirements associated with these processes. These diagrams provide increased visibility into the relationships between functions and related equipments being utilized and managed and can serve as a common communicating vehicle between the designer, program management, and the operational planner. The information and data product requirements to support the above processes were identified along with optimum formats and contents of these products. The resulting data product concepts are presented to support these in-flight maintenance and stowage processes.

Definition and testing of the hydrologic component of the pilot land data system

NASA Technical Reports Server (NTRS)

Ragan, Robert M.; Sircar, Jayanta K.

1987-01-01

The specific aim was to develop within the Pilot Land Data System (PLDS) software design environment, an easily implementable and user friendly geometric correction procedure to readily enable the georeferencing of imagery data from the Advanced Very High Resolution Radiometer (AVHRR) onboard the NOAA series spacecraft. A software subsystem was developed within the guidelines set by the PLDS development environment utilizing NASA Goddard Space Flight Center (GSFC) Image Analysis Facility's (IAF's) Land Analysis Software (LAS) coding standards. The IAS current program development environment, the Transportable Applications Executive (TAE), operates under a VAX VMS operating system and was used as the user interface. A brief overview of the ICARUS algorithm that was implemented in the set of functions developed, is provided. The functional specifications decription is provided, and a list of the individual programs and directory names containing the source and executables installed in the IAF system are listed. A user guide is provided for the LAS system documentation format for the three functions developed.

Model based systems engineering for astronomical projects

NASA Astrophysics Data System (ADS)

Karban, R.; Andolfato, L.; Bristow, P.; Chiozzi, G.; Esselborn, M.; Schilling, M.; Schmid, C.; Sommer, H.; Zamparelli, M.

2014-08-01

Model Based Systems Engineering (MBSE) is an emerging field of systems engineering for which the System Modeling Language (SysML) is a key enabler for descriptive, prescriptive and predictive models. This paper surveys some of the capabilities, expectations and peculiarities of tools-assisted MBSE experienced in real-life astronomical projects. The examples range in depth and scope across a wide spectrum of applications (for example documentation, requirements, analysis, trade studies) and purposes (addressing a particular development need, or accompanying a project throughout many - if not all - its lifecycle phases, fostering reuse and minimizing ambiguity). From the beginnings of the Active Phasing Experiment, through VLT instrumentation, VLTI infrastructure, Telescope Control System for the E-ELT, until Wavefront Control for the E-ELT, we show how stepwise refinements of tools, processes and methods have provided tangible benefits to customary system engineering activities like requirement flow-down, design trade studies, interfaces definition, and validation, by means of a variety of approaches (like Model Checking, Simulation, Model Transformation) and methodologies (like OOSEM, State Analysis)

Information management and analysis system for groundwater data in Thailand

NASA Astrophysics Data System (ADS)

Gill, D.; Luckananurung, P.

1992-01-01

The Ground Water Division of the Thai Department of Mineral Resources maintains a large archive of groundwater data with information on some 50,000 water wells. Each well file contains information on well location, well completion, borehole geology, water levels, water quality, and pumping tests. In order to enable efficient use of this information a computer-based system for information management and analysis was created. The project was sponsored by the United Nations Development Program and the Thai Department of Mineral Resources. The system was designed to serve users who lack prior training in automated data processing. Access is through a friendly user/system dialogue. Tasks are segmented into a number of logical steps, each of which is managed by a separate screen. Selective retrieval is possible by four different methods of area definition and by compliance with user-specified constraints on any combination of database variables. The main types of outputs are: (1) files of retrieved data, screened according to users' specifications; (2) an assortment of pre-formatted reports; (3) computed geochemical parameters and various diagrams of water chemistry derived therefrom; (4) bivariate scatter diagrams and linear regression analysis; (5) posting of data and computed results on maps; and (6) hydraulic aquifer characteristics as computed from pumping tests. Data are entered directly from formatted screens. Most records can be copied directly from hand-written documents. The database-management program performs data integrity checks in real time, enabling corrections at the time of input. The system software can be grouped into: (1) database administration and maintenance—these functions are carried out by the SIR/DBMS software package; (2) user communication interface for task definition and execution control—the interface is written in the operating system command language (VMS/DCL) and in FORTRAN 77; and (3) scientific data-processing programs, written in FORTRAN 77. The system was implemented on a DEC MicroVAX II computer.

Pairwise Trajectory Management (PTM): Concept Description and Documentation

NASA Technical Reports Server (NTRS)

Jones, Kenneth M.; Graff, Thomas J.; Carreno, Victor; Chartrand, Ryan C.; Kibler, Jennifer L.

2018-01-01

Pairwise Trajectory Management (PTM) is an Interval Management (IM) concept that utilizes airborne and ground-based capabilities to enable the implementation of airborne pairwise spacing capabilities in oceanic regions. The goal of PTM is to use airborne surveillance and tools to manage an "at or greater than" inter-aircraft spacing. Due to the accuracy of Automatic Dependent Surveillance-Broadcast (ADS-B) information and the use of airborne spacing guidance, the minimum PTM spacing distance will be less than distances a controller can support with current automation systems that support oceanic operations. Ground tools assist the controller in evaluating the traffic picture and determining appropriate PTM clearances to be issued. Avionics systems provide guidance information that allows the flight crew to conform to the PTM clearance issued by the controller. The combination of a reduced minimum distance and airborne spacing management will increase the capacity and efficiency of aircraft operations at a given altitude or volume of airspace. This document provides an overview of the proposed application, a description of several key scenarios, a high level discussion of expected air and ground equipment and procedure changes, a description of a NASA human-machine interface (HMI) prototype for the flight crew that would support PTM operations, and initial benefits analysis results. Additionally, included as appendices, are the following documents: the PTM Operational Services and Environment Definition (OSED) document and a companion "Future Considerations for the Pairwise Trajectory Management (PTM) Concept: Potential Future Updates for the PTM OSED" paper, a detailed description of the PTM algorithm and PTM Limit Mach rules, initial PTM safety requirements and safety assessment documents, a detailed description of the design, development, and initial evaluations of the proposed flight crew HMI, an overview of the methodology and results of PTM pilot training requirements focus group and human-in-the-loop testing activities, and the PTM Pilot Guide.

EOS image data processing system definition study

NASA Technical Reports Server (NTRS)

Gilbert, J.; Honikman, T.; Mcmahon, E.; Miller, E.; Pietrzak, L.; Yorsz, W.

1973-01-01

The Image Processing System (IPS) requirements and configuration are defined for NASA-sponsored advanced technology Earth Observatory System (EOS). The scope included investigation and definition of IPS operational, functional, and product requirements considering overall system constraints and interfaces (sensor, etc.) The scope also included investigation of the technical feasibility and definition of a point design reflecting system requirements. The design phase required a survey of present and projected technology related to general and special-purpose processors, high-density digital tape recorders, and image recorders.

Shuttle mission simulator baseline definition report, volume 1

NASA Technical Reports Server (NTRS)

Burke, J. F.; Small, D. E.

1973-01-01

A baseline definition of the space shuttle mission simulator is presented. The subjects discussed are: (1) physical arrangement of the complete simulator system in the appropriate facility, with a definition of the required facility modifications, (2) functional descriptions of all hardware units, including the operational features, data demands, and facility interfaces, (3) hardware features necessary to integrate the items into a baseline simulator system to include the rationale for selecting the chosen implementation, and (4) operating, maintenance, and configuration updating characteristics of the simulator hardware.

Electronic Document Delivery: OCLC's Prototype System.

ERIC Educational Resources Information Center

Hickey, Thomas B.; Calabrese, Andrew M.

1986-01-01

Describes development of system for retrieval of documents from magnetic storage that uses stored font definition codes to control an inexpensive laser printer in the production of copies that closely resemble original document. Trends in information equipment and printing industries that will govern future application of this technology are…

8 CFR 270.1 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 8 Aliens and Nationality 1 2011-01-01 2011-01-01 false Definitions. 270.1 Section 270.1 Aliens and... Definitions. For the purpose of this part— Document means an instrument on which is recorded, by means of letters, figures, or marks, matters which may be used to fulfill any requirement of the Act. The term...

8 CFR 270.1 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 8 Aliens and Nationality 1 2014-01-01 2014-01-01 false Definitions. 270.1 Section 270.1 Aliens and... Definitions. For the purpose of this part— Document means an instrument on which is recorded, by means of letters, figures, or marks, matters which may be used to fulfill any requirement of the Act. The term...

8 CFR 270.1 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 8 Aliens and Nationality 1 2012-01-01 2012-01-01 false Definitions. 270.1 Section 270.1 Aliens and... Definitions. For the purpose of this part— Document means an instrument on which is recorded, by means of letters, figures, or marks, matters which may be used to fulfill any requirement of the Act. The term...

75 FR 8854 - Teacher Incentive Fund Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-26

...The Secretary of Education (Secretary) proposes priorities, requirements, definitions, and selection criteria under the Teacher Incentive Fund (TIF) program. These proposed priorities, requirements, definitions, and selection criteria are designed to be used in two separate and distinct TIF grant competitions: The Main TIF competition, which will provide TIF funding to eligible entities to support their implementation of performance-based compensation systems (PBCSs) in accordance with the priorities, the Main TIF requirements, the definitions, and the selection criteria proposed in this document, and the TIF Evaluation competition, which will provide, in accordance with the priorities, the Main TIF requirements, the definitions, and the selection criteria as well as the Evaluation requirements proposed in this document, TIF funding to help pay for the costs of implementing these eligible entities' PBCS in exchange for an agreement to participate in the national evaluation. The Secretary may use these proposed TIF priorities, requirements, definitions, and selection criteria in fiscal year (FY) 2010 and subsequent years. We intend the proposed priorities, requirements, definitions, and selection criteria to improve student achievement in high-need schools by creating incentives for effective teachers and principals in these schools.

Unified Desktop for Monitoring & Control Applications - The Open Navigator Framework Applied for Control Centre and EGSE Applications

NASA Astrophysics Data System (ADS)

Brauer, U.

2007-08-01

The Open Navigator Framework (ONF) was developed to provide a unified and scalable platform for user interface integration. The main objective for the framework was to raise usability of monitoring and control consoles and to provide a reuse of software components in different application areas. ONF is currently applied for the Columbus onboard crew interface, the commanding application for the Columbus Control Centre, the Columbus user facilities specialized user interfaces, the Mission Execution Crew Assistant (MECA) study and EADS Astrium internal R&D projects. ONF provides a well documented and proven middleware for GUI components (Java plugin interface, simplified concept similar to Eclipse). The overall application configuration is performed within a graphical user interface for layout and component selection. The end-user does not have to work in the underlying XML configuration files. ONF was optimized to provide harmonized user interfaces for monitoring and command consoles. It provides many convenience functions designed together with flight controllers and onboard crew: user defined workspaces, incl. support for multi screens efficient communication mechanism between the components integrated web browsing and documentation search &viewing consistent and integrated menus and shortcuts common logging and application configuration (properties) supervision interface for remote plugin GUI access (web based) A large number of operationally proven ONF components have been developed: Command Stack & History: Release of commands and follow up the command acknowledges System Message Panel: Browse, filter and search system messages/events Unified Synoptic System: Generic synoptic display system Situational Awareness : Show overall subsystem status based on monitoring of key parameters System Model Browser: Browse mission database defintions (measurements, commands, events) Flight Procedure Executor: Execute checklist and logical flow interactive procedures Web Browser : Integrated browser reference documentation and operations data Timeline Viewer: View master timeline as Gantt chart Search: Local search of operations products (e.g. documentation, procedures, displays) All GUI components access the underlying spacecraft data (commanding, reporting data, events, command history) via a common library providing adaptors for the current deployments (Columbus MCS, Columbus onboard Data Management System, Columbus Trainer raw packet protocol). New Adaptors are easy to develop. Currently an adaptor to SCOS 2000 is developed as part of a study for the ESTEC standardization section ("USS for ESTEC Reference Facility").

Title V Interface Issues

EPA Pesticide Factsheets

This document may be of assistance in applying the Title V air operating permit regulations. This document is part of the Title V Policy and Guidance Database available at www2.epa.gov/title-v-operating-permits/title-v-operating-permit-policy-and-guidance-document-index. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Title IV-Title V Interface Guidance for States

EPA Pesticide Factsheets

This document may be of assistance in applying the Title V air operating permit regulations. This document is part of the Title V Policy and Guidance Database available at www2.epa.gov/title-v-operating-permits/title-v-operating-permit-policy-and-guidance-document-index. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Earth Observatory Satellite system definition study. Report 6: Space shuttle interfaces/utilization

NASA Technical Reports Server (NTRS)

1974-01-01

An analysis was conducted to determine the compatibility of the Earth Observatory Satellite (EOS) with the space shuttle. The mechanical interfaces and provisions required for a launch or retrieval of the EOS by the space shuttle are summarized. The space shuttle flight support equipment required for the operation is defined. Diagrams of the space shuttle in various configurations are provised to show the mission capability with the EOS. The subjects considered are as follows: (1) structural and mechanical interfaces, (2) spacecraft retention and deployment, (3) spacecraft retrieval, (4) electrical interfaces, (5) payload shuttle operations, (6) shuttle mode cost analysis, (7) shuttle orbit trades, and (8) safety considerations.

TMS communications software. Volume 1: Computer interfaces

NASA Technical Reports Server (NTRS)

Brown, J. S.; Lenker, M. D.

1979-01-01

A prototype bus communications system, which is being used to support the Trend Monitoring System (TMS) as well as for evaluation of the bus concept is considered. Hardware and software interfaces to the MODCOMP and NOVA minicomputers are included. The system software required to drive the interfaces in each TMS computer is described. Documentation of other software for bus statistics monitoring and for transferring files across the bus is also included.

Space shuttle/food system study

NASA Technical Reports Server (NTRS)

1974-01-01

This document establishes the Functional, physical and performance interface requirements are studied between the space shuttle orbiter and the galley water system, the orbiter and the galley electrical system, and the orbiter and the galley structural system. Control of the configuration and design of the applicable interfacing items is intended to maintain compatibility between co-functioning and physically mating items and to assure those performance criteria that are dependent upon the interfacing items.

Advanced EVA system design requirements study: EVAS/space station system interface requirements

NASA Technical Reports Server (NTRS)

Woods, T. G.

1985-01-01

The definition of the Extravehicular Activity (EVA) systems interface requirements and accomodations for effective integration of a production EVA capability into the space station are contained. A description of the EVA systems for which the space station must provide the various interfaces and accomodations are provided. The discussion and analyses of the various space station areas in which the EVA interfaces are required and/or from which implications for EVA system design requirements are derived, are included. The rationale is provided for all EVAS mechanical, fluid, electrical, communications, and data system interfaces as well as exterior and interior requirements necessary to facilitate EVA operations. Results of the studies supporting these discussions are presented in the appendix.

Beta Atomic Contacts: Identifying Critical Specific Contacts in Protein Binding Interfaces

PubMed Central

Liu, Qian; Kwoh, Chee Keong; Hoi, Steven C. H.

2013-01-01

Specific binding between proteins plays a crucial role in molecular functions and biological processes. Protein binding interfaces and their atomic contacts are typically defined by simple criteria, such as distance-based definitions that only use some threshold of spatial distance in previous studies. These definitions neglect the nearby atomic organization of contact atoms, and thus detect predominant contacts which are interrupted by other atoms. It is questionable whether such kinds of interrupted contacts are as important as other contacts in protein binding. To tackle this challenge, we propose a new definition called beta (β) atomic contacts. Our definition, founded on the β-skeletons in computational geometry, requires that there is no other atom in the contact spheres defined by two contact atoms; this sphere is similar to the van der Waals spheres of atoms. The statistical analysis on a large dataset shows that β contacts are only a small fraction of conventional distance-based contacts. To empirically quantify the importance of β contacts, we design βACV, an SVM classifier with β contacts as input, to classify homodimers from crystal packing. We found that our βACV is able to achieve the state-of-the-art classification performance superior to SVM classifiers with distance-based contacts as input. Our βACV also outperforms several existing methods when being evaluated on several datasets in previous works. The promising empirical performance suggests that β contacts can truly identify critical specific contacts in protein binding interfaces. β contacts thus provide a new model for more precise description of atomic organization in protein quaternary structures than distance-based contacts. PMID:23630569

Bridging the Guideline Implementation Gap: A Systematic, Document-Centered Approach to Guideline Implementation

PubMed Central

Shiffman, Richard N.; Michel, George; Essaihi, Abdelwaheb; Thornquist, Elizabeth

2004-01-01

Objective: A gap exists between the information contained in published clinical practice guidelines and the knowledge and information that are necessary to implement them. This work describes a process to systematize and make explicit the translation of document-based knowledge into workflow-integrated clinical decision support systems. Design: This approach uses the Guideline Elements Model (GEM) to represent the guideline knowledge. Implementation requires a number of steps to translate the knowledge contained in guideline text into a computable format and to integrate the information into clinical workflow. The steps include: (1) selection of a guideline and specific recommendations for implementation, (2) markup of the guideline text, (3) atomization, (4) deabstraction and (5) disambiguation of recommendation concepts, (6) verification of rule set completeness, (7) addition of explanations, (8) building executable statements, (9) specification of origins of decision variables and insertions of recommended actions, (10) definition of action types and selection of associated beneficial services, (11) choice of interface components, and (12) creation of requirement specification. Results: The authors illustrate these component processes using examples drawn from recent experience translating recommendations from the National Heart, Lung, and Blood Institute's guideline on management of chronic asthma into a workflow-integrated decision support system that operates within the Logician electronic health record system. Conclusion: Using the guideline document as a knowledge source promotes authentic translation of domain knowledge and reduces the overall complexity of the implementation task. From this framework, we believe that a better understanding of activities involved in guideline implementation will emerge. PMID:15187061

ROMPS critical design review. Volume 3: Furnace module design documentation

NASA Technical Reports Server (NTRS)

Dobbs, M. E.

1992-01-01

As part of the furnace module design documentation, the furnace module Easylab programs definitions and command variables are described. Also included are Easylab commands flow charts and fault conditions.

Development of Integrated Programs for Aerospace-Vehicle Design (IPAD)

NASA Technical Reports Server (NTRS)

Anderson, O. L.; Calvery, A. L.; Davis, D. A.; Dickmann, L.; Folger, D. H.; Jochem, E. N.; Kitto, C. M.; Vonlimbach, G.

1977-01-01

Integrated Programs for Aerospace Vehicle Design (IPAD) system design requirements are given. The information is based on the IPAD User Requirements Document (D6-IPAD-70013-D) and the Integrated Information Processing Requirements Document (D6-IPAD-70012-D). General information about IPAD and a list of the system design requirements that are to be satisfied by the IPAD system are given. The system design requirements definition is to be considered as a baseline definition of the IPAD system design requirements.

Definitions of Frequency and Timing Terms, Satellite Navigation and Timing Systems, and the Behavior and Analyses of Precision Crystal and Atomic Frequency Standards and their Characteristics

DTIC Science & Technology

2009-05-01

time transfer techniques has largely been due to the improvement in frequency standards. In this document, an effort was made to provide substantial...of RCC Document 214-94, contains definitions of frequency and timing terms, time transfer techniques and analysis, and behavior of crystal and atomic...Characteristics, May 2009 viii TTG Telecommunications and Timing Group TWSTFT Two-Way Satellite Time and Frequency Transfer U.S. United States USNO

SPEAKEASY HELP documents

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fink, J.K.

1972-07-01

The HELP documents provide SPEAKEASY users with concise definitions of most of the words available in the current processors. In this report, the documents are given in a variety of formats to enable one to find specific information quickly. The bulk of this report consists of computer read-out of the HELP library via SPEAKEASY.

Terminologie de Base de la Documentation. (Basic Terminology of Documentation).

ERIC Educational Resources Information Center

Commission des Communautes Europeennes (Luxembourg). Bureau de Terminologie.

This glossary is designed to aid non-specialists whose activities require that they have some familiarity with the terminology of the modern methods of documentation. Definitions have been assembled from various dictionaries, manuals, etc., with particular attention being given to the publications of UNESCO and the International Standards…

10 CFR 1016.32 - Classification and preparation of documents.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false Classification and preparation of documents. 1016.32... of Information § 1016.32 Classification and preparation of documents. (a) Classification. Restricted... he is not positive is not within that definition and CG-UF-3 does not provide positive classification...

10 CFR 1016.32 - Classification and preparation of documents.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 4 2014-01-01 2014-01-01 false Classification and preparation of documents. 1016.32... of Information § 1016.32 Classification and preparation of documents. (a) Classification. Restricted... he is not positive is not within that definition and CG-UF-3 does not provide positive classification...

10 CFR 1016.32 - Classification and preparation of documents.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false Classification and preparation of documents. 1016.32... of Information § 1016.32 Classification and preparation of documents. (a) Classification. Restricted... he is not positive is not within that definition and CG-UF-3 does not provide positive classification...

Space Station Mission Planning System (MPS) development study. Volume 2

NASA Technical Reports Server (NTRS)

Klus, W. J.

1987-01-01

The process and existing software used for Spacelab payload mission planning were studied. A complete baseline definition of the Spacelab payload mission planning process was established, along with a definition of existing software capabilities for potential extrapolation to the Space Station. This information was used as a basis for defining system requirements to support Space Station mission planning. The Space Station mission planning concept was reviewed for the purpose of identifying areas where artificial intelligence concepts might offer substantially improved capability. Three specific artificial intelligence concepts were to be investigated for applicability: natural language interfaces; expert systems; and automatic programming. The advantages and disadvantages of interfacing an artificial intelligence language with existing FORTRAN programs or of converting totally to a new programming language were identified.

Experiences in Interagency and International Interfaces for Mission Support

NASA Technical Reports Server (NTRS)

Dell, G. T.; Mitchell, W. J.; Thompson, T. W.; Cappellari, J. O., Jr.; Flores-Amaya, F.

1996-01-01

The Flight Dynamics Division (FDD) of the National Aeronautics and Space Administration (NASA) Goddard Space Flight Center (GFSC) provides extensive support and products for Space Shuttle missions, expendable launch vehicle launches, and routine on-orbit operations for a variety of spacecraft. A major challenge in providing support for these missions is defining and generating the products required for mission support and developing the method by which these products are exchanged between supporting agencies. As interagency and international cooperation has increased in the space community, the FDD customer base has grown and with it the number and variety of external interfaces and product definitions. Currently, the FDD has working interfaces with the NASA Space and Ground Networks, the Johnson Space Center, the White Sands Complex, the Jet propulsion Laboratory (including the Deep Space Network), the United States Air Force, the Centre National d'Etudes Spatiales, the German Spaceflight Operations Center, the European Space Agency, and the National Space Development Agency of Japan. With the increasing spectrum of possible data product definitions and delivery methods, the FDD is using its extensive interagency experience to improve its support of established customers and to provide leadership in adapting/developing new interfaces. This paper describes the evolution of the interfaces between the FDD and its customers, discusses many of the joint activities ith these customers, and summarizes key lessons learned that can be applied to current and future support.

Shuttle mission simulator baseline definition report, volume 2

NASA Technical Reports Server (NTRS)

Dahlberg, A. W.; Small, D. E.

1973-01-01

The baseline definition report for the space shuttle mission simulator is presented. The subjects discussed are: (1) the general configurations, (2) motion base crew station, (3) instructor operator station complex, (4) display devices, (5) electromagnetic compatibility, (6) external interface equipment, (7) data conversion equipment, (8) fixed base crew station equipment, and (9) computer complex. Block diagrams of the supporting subsystems are provided.

Documents Pertaining to Resource Conservation and Recovery Act Corrective Action Event Codes

EPA Pesticide Factsheets

Document containing RCRA Corrective Action event codes and definitions, including national requirements, initiating sources, dates, and guidance, from the first facility assessment until the Corrective Action is terminated.

26 CFR 1.1471-1 - Scope of chapter 4 and definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... an image retrieval system (such as portable document format (.pdf) or scanned documents). (35) Entity..., custodial institution, or specified insurance company. (124) TIN. The term TIN means the tax identifying...

26 CFR 1.1471-1 - Scope of chapter 4 and definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... an image retrieval system (such as portable document format (.pdf) or scanned documents). (39) Entity..., custodial institution, or specified insurance company. (133) TIN. The term TIN means the tax identifying...

Definition and evaluation of the data-link layer of PACnet

NASA Astrophysics Data System (ADS)

Alsafadi, Yasser H.; Martinez, Ralph; Sanders, William H.

1991-07-01

PACnet is a 200-500 Mbps dual-ring fiber optic network designed to implement a picture archiving and communication system (PACS) in a hospital environment. The network consists of three channels: an image transfer channel, a command and control channel, and a real-time data channel. An initial network interface unit (NIU) design for PACnet consisted of a functional description of the protocols and NIU major components. In order to develop a demonstration prototype, additional definition of protocol algorithms of each channel is necessary. Using the International Standards Organization/Open Systems Interconnection (ISO/OSI) reference model as a guide, the definition of the data link layer is extended. This definition covers interface service specifications for the two constituent sublayers: logical link control (LLC) and medium access control (MAC). Furthermore, it describes procedures for data transfer, mechanisms of error detection and fault recovery. A performance evaluation study was then made to determine how the network performs under various application scenarios. The performance evaluation study was performed using stochastic activity networks, which can formally describe the network behavior. The results of the study demonstrate the feasibility of PACnet as an integrated image, data, and voice network for PACS.

Emergency department operations dictionary: results of the second performance measures and benchmarking summit.

PubMed

Welch, Shari J; Stone-Griffith, Suzanne; Asplin, Brent; Davidson, Steven J; Augustine, James; Schuur, Jeremiah D

2011-05-01

The public, payers, hospitals, and Centers for Medicare and Medicaid Services (CMS) are demanding that emergency departments (EDs) measure and improve performance, but this cannot be done unless we define the terms used in ED operations. On February 24, 2010, 32 stakeholders from 13 professional organizations met in Salt Lake City, Utah, to standardize ED operations metrics and definitions, which are presented in this consensus paper. Emergency medicine (EM) experts attending the Second Performance Measures and Benchmarking Summit reviewed, expanded, and updated key definitions for ED operations. Prior to the meeting, participants were provided with the definitions created at the first summit in 2006 and relevant documents from other organizations and asked to identify gaps and limitations in the original work. Those responses were used to devise a plan to revise and update the definitions. At the summit, attendees discussed and debated key terminology, and workgroups were created to draft a more comprehensive document. These results have been crafted into two reference documents, one for metrics and the operations dictionary presented here. The ED Operations Dictionary defines ED spaces, processes, patient populations, and new ED roles. Common definitions of key terms will improve the ability to compare ED operations research and practice and provide a common language for frontline practitioners, managers, and researchers. © 2011 by the Society for Academic Emergency Medicine.

Transition to intensive care nursing: establishing a starting point.

PubMed

Boyle, Martin; Butcher, Rand; Conyers, Vicki; Kendrick, Tina; MacNamara, Mary; Lang, Susie

2008-11-01

There is a shortage of intensive care (IC) nurses. A supported transition to IC nursing has been identified as a key strategy for recruitment and retention. In 2004 a discussion document relating to transition of IC nurses was presented to the New South Wales (NSW) Chief Nursing Officer (CNO). A workshop was held with key stakeholders and a Steering Group was established to develop a state-wide transition to IC nursing program. To survey orientation programs and educational resources and develop definitions, goals, learning objectives and clinical competencies relating to transition to IC nursing practice. A questionnaire and a draft document of definitions, target group, goals, learning objectives and clinical competencies for IC transition was distributed to 43 NSW IC units (ICUs). An iterative process of anonymous feedback and modification was undertaken to establish agreement on content. Responses were received from 29 units (return rate of 67%). The survey of educational resources indicated ICUs had access to educational support and there was evidence of a lack of a common standard or definition for "orientation" or "transition". The definitions, target group, goals and competency statements from the draft document were accepted with minor editorial change. Seventeen learning objectives or psychomotor skills were modified and an additional 19 were added to the draft as a result of the process. This work has established valid definitions, goals, learning objectives and clinical competencies that describe transition to intensive care nursing.

Closing the Loop in ICU Decision Support: Physiologic Event Detection, Alerts, and Documentation

PubMed Central

Norris, Patrick R.; Dawant, Benoit M.

2002-01-01

Automated physiologic event detection and alerting is a challenging task in the ICU. Ideally care providers should be alerted only when events are clinically significant and there is opportunity for corrective action. However, the concepts of clinical significance and opportunity are difficult to define in automated systems, and effectiveness of alerting algorithms is difficult to measure. This paper describes recent efforts on the Simon project to capture information from ICU care providers about patient state and therapy in response to alerts, in order to assess the value of event definitions and progressively refine alerting algorithms. Event definitions for intracranial pressure and cerebral perfusion pressure were studied by implementing a reliable system to automatically deliver alerts to clinical users’ alphanumeric pagers, and to capture associated documentation about patient state and therapy when the alerts occurred. During a 6-month test period in the trauma ICU at Vanderbilt University Medical Center, 530 alerts were detected in 2280 hours of data spanning 14 patients. Clinical users electronically documented 81% of these alerts as they occurred. Retrospectively classifying documentation based on therapeutic actions taken, or reasons why actions were not taken, provided useful information about ways to potentially improve event definitions and enhance system utility.

AgRISTARS: Yield model development/soil moisture. Interface control document

NASA Technical Reports Server (NTRS)

1980-01-01

The interactions and support functions required between the crop Yield Model Development (YMD) Project and Soil Moisture (SM) Project are defined. The requirements for YMD support of SM and vice-versa are outlined. Specific tasks in support of these interfaces are defined for development of support functions.

10 CFR Appendix B to Part 50 - Quality Assurance Criteria for Nuclear Power Plants and Fuel Reprocessing Plants

Code of Federal Regulations, 2012 CFR

2012-01-01

... executing. III. Design Control Measures shall be established to assure that applicable regulatory... control of design interfaces and for coordination among participating design organizations. These measures..., approval, release, distribution, and revision of documents involving design interfaces. The design control...

10 CFR Appendix B to Part 50 - Quality Assurance Criteria for Nuclear Power Plants and Fuel Reprocessing Plants

Code of Federal Regulations, 2013 CFR

2013-01-01

... executing. III. Design Control Measures shall be established to assure that applicable regulatory... control of design interfaces and for coordination among participating design organizations. These measures..., approval, release, distribution, and revision of documents involving design interfaces. The design control...

Formulation of consumables management models. Consumables flight planning worksheet utilization

NASA Technical Reports Server (NTRS)

Newman, C. M.

1977-01-01

The updated and reformatted consumables flight planning worksheet is documented. An instruction set for applying the worksheet, and a sample application of the worksheet is disclosed. The particular application is for the STS interfacing with sortie payloads and typifies the interfacing of the delivery system and payloads.

Monitoring of Water and Contaminant Migration at the Groundwater-Surface Water Interface

DTIC Science & Technology

2008-08-01

seepage is occurring in a freshwater lake environment and to map the lateral extent of any subsurface contamination at the groundwater –surface water ...and Contaminant Migration at the Groundwater -Surface Water Interface August 2008 Report Documentation Page Form ApprovedOMB No. 0704-0188 Public...4. TITLE AND SUBTITLE Monitoring of Water and Contaminant Migration at the Groundwater -Surface Water Interface 5a. CONTRACT NUMBER 5b. GRANT NUMBER

An approach to developing user interfaces for space systems

NASA Astrophysics Data System (ADS)

Shackelford, Keith; McKinney, Karen

1993-08-01

Inherent weakness in the traditional waterfall model of software development has led to the definition of the spiral model. The spiral model software development lifecycle model, however, has not been applied to NASA projects. This paper describes its use in developing real time user interface software for an Environmental Control and Life Support System (ECLSS) Process Control Prototype at NASA's Marshall Space Flight Center.

Virtual Frame Buffer Interface Program

NASA Technical Reports Server (NTRS)

Wolfe, Thomas L.

1990-01-01

Virtual Frame Buffer Interface program makes all frame buffers appear as generic frame buffer with specified set of characteristics, allowing programmers to write codes that run unmodified on all supported hardware. Converts generic commands to actual device commands. Consists of definition of capabilities and FORTRAN subroutines called by application programs. Developed in FORTRAN 77 for DEC VAX 11/780 or DEC VAX 11/750 computer under VMS 4.X.

A Generic Method for Distribution and Transfer of ECTS and Other Norm-Referenced Grades within Student Cohorts

ERIC Educational Resources Information Center

Warfvinge, Per

2008-01-01

The ECTS grade transfer scale is an interface grade scale to help European universities, students and employers to understand the level of student achievement. Hence, the ECTS scale can be seen as an interface, transforming local scales to a common system where A-E denote passing grades. By definition, ECTS should distribute the passing students…

Old-growth definition for wet pine forests, woodlands, and savannas. Forest Service general technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harms, W.R.

1996-09-01

All Forest Service Stations and Regions began developing old-growth definitions for specific forest types. Definitions will first be developed for broad forest types and based mainly on published information and so must be viewed accordingly. Refinements will be made by the Forest Service as new information becomes available. This document represents 1 of 35 forest types for which old-growth definition will be drafted.

Apprentices and Trainees: Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2017

2017-01-01

This document covers the data terms used in publications sourced from the National Apprentice and Trainee Collection and their associated data tables. The primary purpose of this document is to assist users of the publications to understand the specific data terms used within them. Terms are listed in alphabetical order with the following…

Students and Courses--Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2014

2014-01-01

This document covers the data terms used in publications sourced from the National VET Provider Collection and their associated data tables. The primary purpose of this document is to assist users of the publication to understand the specific data terms used within them. Terms that appear in the publications and data items are listed in…

Indigenous VET Research and Statistics: Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

This document covers the data terms used in the "Indigenous Research and Statistics" resources. It covers information contained in the "Apprentices and Trainees June Quarter 2009 report," the "Students and Courses 2009" report and the "Student Outcomes 2009" report and their associated data tables. The primary purpose of this document is to assist…

48 CFR 19.1501 - Definition.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Definition. 19.1501 Section 19.1501 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SOCIOECONOMIC... Repository means a secure, Web-based application that collects, stores, and disseminates documents to the...

48 CFR 19.1501 - Definition.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Definition. 19.1501 Section 19.1501 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SOCIOECONOMIC... Repository means a secure, Web-based application that collects, stores, and disseminates documents to the...

48 CFR 19.1501 - Definition.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 1 2014-10-01 2014-10-01 false Definition. 19.1501 Section 19.1501 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SOCIOECONOMIC... Repository means a secure, Web-based application that collects, stores, and disseminates documents to the...

48 CFR 19.1501 - Definition.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 1 2012-10-01 2012-10-01 false Definition. 19.1501 Section 19.1501 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SOCIOECONOMIC... Repository means a secure, Web-based application that collects, stores, and disseminates documents to the...

Phases, phase equilibria, and phase rules in low-dimensional systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frolov, T., E-mail: timfrol@berkeley.edu; Mishin, Y., E-mail: ymishin@gmu.edu

2015-07-28

We present a unified approach to thermodynamic description of one, two, and three dimensional phases and phase transformations among them. The approach is based on a rigorous definition of a phase applicable to thermodynamic systems of any dimensionality. Within this approach, the same thermodynamic formalism can be applied for the description of phase transformations in bulk systems, interfaces, and line defects separating interface phases. For both lines and interfaces, we rigorously derive an adsorption equation, the phase coexistence equations, and other thermodynamic relations expressed in terms of generalized line and interface excess quantities. As a generalization of the Gibbs phasemore » rule for bulk phases, we derive phase rules for lines and interfaces and predict the maximum number of phases than may coexist in systems of the respective dimensionality.« less

14 CFR 1215.102 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... NASA communication circuits to unify the above into a functioning system. It specifically excludes the user ground system/TDRSS interface. (c) Bit stream. The digital electronic signals acquired by TDRSS...

14 CFR 1215.102 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... NASA communication circuits to unify the above into a functioning system. It specifically excludes the user ground system/TDRSS interface. (c) Bit stream. The digital electronic signals acquired by TDRSS...

Feasibility and systems definition study for Microwave Multi-Application Payload (MMAP)

NASA Technical Reports Server (NTRS)

Horton, J. B.; Allen, C. C.; Massaro, M. J.; Zemany, J. L.; Murrell, J. W.; Stanhouse, R. W.; Condon, G. P.; Stone, R. F.; Swana, J.; Afifi, M.

1977-01-01

Work completed on three Shuttle/Spacelab experiments is examined: the Adaptive Multibeam Phased Array Antenna (AMPA) Experiment, Electromagnetic Environment Experiment (EEE) and Millimeter Wave Communications Experiment (MWCE). Results included the definition of operating modes, sequence of operation, radii of operation about several ground stations, signal format, foot prints of typical orbits and preliminary definition of ground and user terminals. Conceptual hardware designs, Spacelab interfaces, data handling methods, experiment testing and verification studies were included. The MWCE-MOD I was defined conceptually for a steerable high gain antenna.

Cross-Paradigm Simulation Modeling: Challenges and Successes

DTIC Science & Technology

2011-12-01

is also highlighted. 2.1 Discrete-Event Simulation Discrete-event simulation ( DES ) is a modeling method for stochastic, dynamic models where...which almost anything can be coded; models can be incredibly detailed. Most commercial DES software has a graphical interface which allows the user to...results. Although the above definition is the commonly accepted definition of DES , there are two different worldviews that dominate DES modeling today: a

A Database Approach to Computer Integrated Manufacturing

DTIC Science & Technology

1988-06-01

advanced application areas such as tactical weapons systems, industrial manufacturing systems, and -D, ........... . . .m - I I [ l~ ii i l I4...manufacturing industry . We will provide definitions for the functions which are most prevalent in our research. Figure 3 shows the basic processes partitioned...IGES) [Ref. 9] and the Product Definition Data Interface (PDDI) [Ref. 101. 11 The IGES specification is considered an industry standard for the

Ambient Air Definition

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Definition of Source

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Specification of the Transmitted Signal of the Omega Navigation System.

DOT National Transportation Integrated Search

1984-01-01

This report documents the specification of the transmitted signal to the OMEGA Navigation System. It is intended as a reference document consisting of specifications, definitions, and explanations for general use by designers, manufacturers, and user...

7 CFR 62.206 - Access to program documents and activities.

Code of Federal Regulations, 2010 CFR

2010-01-01

... (CONTINUED) LIVESTOCK, MEAT, AND OTHER AGRICULTURAL COMMODITIES (QUALITY SYSTEMS VERIFICATION PROGRAMS) Quality Systems Verification Programs Definitions Service § 62.206 Access to program documents and... SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) REGULATIONS...

Standard Generalized Markup Language for self-defining structured reports.

PubMed

Kahn, C E

1999-01-01

Structured reporting is the process of using standardized data elements and predetermined data-entry formats to record observations. The Standard Generalized Markup Language (SGML; International Standards Organization (ISO) 8879:1986)--an open, internationally accepted standard for document interchange was used to encode medical observations acquired in an Internet-based structured reporting system. The resulting report is self-documenting: it includes a definition of its allowable data fields and values encoded as a report-specific SGML document type definition (DTD). The data-entry forms, DTD, and report document instances are based on report specifications written in a simple, SGML-based language designed for that purpose. Reporting concepts can be linked with those of external vocabularies such as the Unified Medical Language System (UMLS) Metathesaurus. The use of open standards such as SGML is an important step in the creation of open, universally comprehensible structured reports.

Migration of the ATLAS Metadata Interface (AMI) to Web 2.0 and cloud

NASA Astrophysics Data System (ADS)

Odier, J.; Albrand, S.; Fulachier, J.; Lambert, F.

2015-12-01

The ATLAS Metadata Interface (AMI), a mature application of more than 10 years of existence, is currently under adaptation to some recently available technologies. The web interfaces, which previously manipulated XML documents using XSL transformations, are being migrated to Asynchronous JavaScript (AJAX). Web development is considerably simplified by the introduction of a framework based on JQuery and Twitter Bootstrap. Finally, the AMI services are being migrated to an OpenStack cloud infrastructure.

Modeling Complex Cross-Systems Software Interfaces Using SysML

NASA Technical Reports Server (NTRS)

Mandutianu, Sanda; Morillo, Ron; Simpson, Kim; Liepack, Otfrid; Bonanne, Kevin

2013-01-01

The complex flight and ground systems for NASA human space exploration are designed, built, operated and managed as separate programs and projects. However, each system relies on one or more of the other systems in order to accomplish specific mission objectives, creating a complex, tightly coupled architecture. Thus, there is a fundamental need to understand how each system interacts with the other. To determine if a model-based system engineering approach could be utilized to assist with understanding the complex system interactions, the NASA Engineering and Safety Center (NESC) sponsored a task to develop an approach for performing cross-system behavior modeling. This paper presents the results of applying Model Based Systems Engineering (MBSE) principles using the System Modeling Language (SysML) to define cross-system behaviors and how they map to crosssystem software interfaces documented in system-level Interface Control Documents (ICDs).

An XML-based system for the flexible classification and retrieval of clinical practice guidelines.

PubMed Central

Ganslandt, T.; Mueller, M. L.; Krieglstein, C. F.; Senninger, N.; Prokosch, H. U.

2002-01-01

Beneficial effects of clinical practice guidelines (CPGs) have not yet reached expectations due to limited routine adoption. Electronic distribution and reminder systems have the potential to overcome implementation barriers. Existing electronic CPG repositories like the National Guideline Clearinghouse (NGC) provide individual access but lack standardized computer-readable interfaces necessary for automated guideline retrieval. The aim of this paper was to facilitate automated context-based selection and presentation of CPGs. Using attributes from the NGC classification scheme, an XML-based metadata repository was successfully implemented, providing document storage, classification and retrieval functionality. Semi-automated extraction of attributes was implemented for the import of XML guideline documents using XPath. A hospital information system interface was exemplarily implemented for diagnosis-based guideline invocation. Limitations of the implemented system are discussed and possible future work is outlined. Integration of standardized computer-readable search interfaces into existing CPG repositories is proposed. PMID:12463831

Does Interface Matter? A Study of Web Authoring and Editing by Inexperienced Web Writers

ERIC Educational Resources Information Center

Dick, Rodney F.

2006-01-01

This study explores the complicated nature of the interface as a mediational tool for inexperienced writers as they composed hypertext documents. Because technology can become so quickly and inextricably connected to people's everyday lives, it is essential to explore the effects on these technologies before they become invisible. Because…

Web-Based Interactive Electronic Technical Manual (IETM) Common User Interface Style Guide, Version 2.0

DTIC Science & Technology

2003-07-01

Technical Report WEB-BASED INTERACTIVE ELECTRONIC TECHNICAL MANUAL (IETM) COMMON USER INTERFACE STYLE GUIDE Version 2.0 – July 2003 by L. John Junod ...ACKNOWLEDGEMENTS The principal authors of this document were: John Junod – NSWC, Carderock Division, Phil Deuell – AMSEC LLC, Kathleen Moore

Interfacing Optical Document Scanners: Principles and Practical Considerations.

ERIC Educational Resources Information Center

Krus, David J.; Kodimer, Dennis

1987-01-01

Handlers for interfacing the ScanTron and 2700 Optical Mark Readers with the IBM AT/XT/PC and Tandy 2000/1000/3000 iAPX 88/186/286 based computers were described. Differences between programing an RS232C serial port using BIOS interrupts and directly addressing the Motorola 8550 ART microprocessor were discussed. (Author/LMO)

DETECTION OF A GROUND-WATER/SURFACE-WATER INTERFACE WITH DIRECT-PUSH EQUIPMENT

EPA Science Inventory

A ground-water/surface-water interface (GSI) was documented at the Thermo Chem CERCLA Site in Muskegon, MI via direct-push (DP) sampling. At that time, contaminated ground water flowed from the upland area of the site into the Black Creek floodplain. DP rods equipped with a 1.5...

14 CFR 1215.102 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... necessary TDRSS operational areas, interface devices, and NASA communication circuits that unify the above... stream. The electronic signals acquired by TDRSS from the user craft or the user-generated input commands...

Step 1: Human System Interface (HSI) Functional Requirements Document (FRD). Version 2

NASA Technical Reports Server (NTRS)

2006-01-01

This Functional Requirements Document (FRD) establishes a minimum set of Human System Interface (HSI) functional requirements to achieve the Access 5 Vision of "operating High Altitude, Long Endurance (HALE) Unmanned Aircraft Systems (UAS) routinely, safely, and reliably in the National Airspace System (NAS)". Basically, it provides what functions are necessary to fly UAS in the NAS. The framework used to identify the appropriate functions was the "Aviate, Navigate, Communicate, and Avoid Hazards" structure identified in the Access 5 FRD. As a result, fifteen high-level functional requirements were developed. In addition, several of them have been decomposed into low-level functional requirements to provide more detail.

An Evaluation and Redesign of the Conflict Prediction and Trial Planning Planview Graphical User Interface

NASA Technical Reports Server (NTRS)

Laudeman, Irene V.; Brasil, Connie L.; Stassart, Philippe

1998-01-01

The Planview Graphical User Interface (PGUI) is the primary display of air traffic for the Conflict Prediction and Trial Planning, function of the Center TRACON Automation System. The PGUI displays air traffic information that assists the user in making decisions related to conflict detection, conflict resolution, and traffic flow management. The intent of this document is to outline the human factors issues related to the design of the conflict prediction and trial planning portions of the PGUI, document all human factors related design changes made to the PGUI from December 1996 to September 1997, and outline future plans for the ongoing PGUI design.

Ground Systems Development Environment (GSDE) interface requirements analysis: Operations scenarios

NASA Technical Reports Server (NTRS)

Church, Victor E.; Phillips, John

1991-01-01

This report is a preliminary assessment of the functional and data interface requirements to the link between the GSDE GS/SPF (Amdahl) and the Space Station Control Center (SSCC) and Space Station Training Facility (SSTF) Integration, Verification, and Test Environments (IVTE's). These interfaces will be involved in ground software development of both the control center and the simulation and training systems. Our understanding of the configuration management (CM) interface and the expected functional characteristics of the Amdahl-IVTE interface is described. A set of assumptions and questions that need to be considered and resolved in order to complete the interface functional and data requirements definitions are presented. A listing of information items defined to describe software configuration items in the GSDE CM system is included. It also includes listings of standard reports of CM information and of CM-related tools in the GSDE.

45 CFR 160.103 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., the following definitions apply to this subchapter: Act means the Social Security Act. Administrative..., statements, and other required documents. Electronic media means: (1) Electronic storage material on which...) and any removable/transportable digital memory medium, such as magnetic tape or disk, optical disk, or...

45 CFR 160.103 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., the following definitions apply to this subchapter: Act means the Social Security Act. Administrative..., statements, and other required documents. Electronic media means: (1) Electronic storage material on which...) and any removable/transportable digital memory medium, such as magnetic tape or disk, optical disk, or...

39 CFR 273.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 39 Postal Service 1 2010-07-01 2010-07-01 false Definitions. 273.2 Section 273.2 Postal Service UNITED STATES POSTAL SERVICE ORGANIZATION AND ADMINISTRATION ADMINISTRATION OF PROGRAM FRAUD CIVIL... representation, certification, affirmation, document, record, or accounting or bookkeeping entry made: (1) With...

76 FR 38992 - Approval and Promulgation of Air Quality Implementation Plans; Pennsylvania; Update to Materials...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-05

... Definitions 5/24/10 12/28/10, 75 FR 81555... Addition of four new definitions: Exterior panels, interior panels, flat wood panel coating, and tileboard. See Part III of the IBR document. * * * * * * Part E...

48 CFR 227.7201 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7201 Definitions. (a) As used in this subpart, unless... subpart are defined in the clause at 252.227-7014, Rights in Noncommercial Computer Software and...

48 CFR 227.7201 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7201 Definitions. (a) As used in this subpart, unless... subpart are defined in the clause at 252.227-7014, Rights in Noncommercial Computer Software and...

48 CFR 227.7201 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7201 Definitions. (a) As used in this subpart, unless... subpart are defined in the clause at 252.227-7014, Rights in Noncommercial Computer Software and...

48 CFR 227.7201 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7201 Definitions. (a) As used in this subpart, unless... subpart are defined in the clause at 252.227-7014, Rights in Noncommercial Computer Software and...

48 CFR 227.7201 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Computer Software and Computer Software Documentation 227.7201 Definitions. (a) As used in this subpart, unless... subpart are defined in the clause at 252.227-7014, Rights in Noncommercial Computer Software and...

7 CFR 1718.50 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 11 2010-01-01 2010-01-01 false Definitions. 1718.50 Section 1718.50 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE LOAN SECURITY DOCUMENTS FOR ELECTRIC BORROWERS Mortgage for Distribution Borrowers § 1718.50...

8 CFR 1003.13 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... and Nationality EXECUTIVE OFFICE FOR IMMIGRATION REVIEW, DEPARTMENT OF JUSTICE GENERAL PROVISIONS EXECUTIVE OFFICE FOR IMMIGRATION REVIEW Immigration Court-Rules of Procedure § 1003.13 Definitions. As used... proceeding before an Immigration Judge. For proceedings initiated prior to April 1, 1997, these documents...

Developing an Interface to Order and Document Health Education Videos in the Electronic Health Record.

PubMed

Wojcik, Lauren

2015-01-01

Transitioning to electronic health records (EHRs) provides an opportunity for health care systems to integrate educational content available on interactive patient systems (IPS) with the medical documentation system. This column discusses how one hospital simplified providers' workflow by making it easier to order educational videos and ensure that completed education is documented within the medical record. Integrating the EHR and IPS streamlined the provision of patient education, improved documentation, and supported the organization in meeting core requirements for Meaningful Use.

Federated Ground Station Network Model and Interface Specification

DTIC Science & Technology

2014-12-01

interface definition language JSON JavaScript Object Notation LEO low Earth orbit LNA low-noise amplifier MC3 Mobile CubeSat Command and Control...Naval Research Laboratory OQPSK offset quadrature phase-shift keying xviii P2P peer-to-peer PKI public key infrastructure REST Representational...enhanced our work being performed on the Mobile CubeSat Command and Control (MC3) ground station network. You also provided crucial guidance from

Family history assessment for colorectal cancer (CRC) risk analysis - comparison of diagram- and questionnaire-based web interfaces.

PubMed

Schultz, Michael; Seo, Steven Bohwan; Holt, Alec; Regenbrecht, Holger

2015-11-18

Colorectal cancer (CRC) has a high incidence, especially in New Zealand. The reasons for this are unknown. While most cancers develop sporadically, a positive family history, determined by the number and age at diagnosis of affected first and second degree relatives with CRC is one of the major factors, which may increase an individual's lifetime risk. Before a patient can be enrolled in a surveillance program a detailed assessment and documentation of the family history is important but time consuming and often inaccurate. The documentation is usually paper-based. Our aim was therefore to develop and validate the usability and efficacy of a web-based family history assessment tool for CRC suitable for the general population. The tool was also to calculate the risk and make a recommendation for surveillance. Two versions of an electronic assessment tool, diagram-based and questionnaire-based, were developed with the risk analysis and recommendations for surveillance based on the New Zealand Guidelines Group recommendations. Accuracy of our tool was tested prior to the study by comparing risk calculations based on family history by experienced gastroenterologists with the electronic assessment. The general public, visiting a local science fair were asked to use and comment on the usability of the two interfaces. Ninety people assessed and commented on the two interfaces. Both interfaces were effective in assessing the risk to develop CRC through their familial history for CRC. However, the questionnaire-based interface performed with significantly better satisfaction (p = 0.001) than the diagram-based interface. There was no difference in efficacy though. We conclude that a web-based questionnaire tool can assist in the accurate documentation and analysis of the family history relevant to determine the individual risk of CRC based on local guidelines. The calculator is now implemented and assessable through the web-page of a local charity for colorectal cancer awareness and integral part of the local general practitioners' e-referral system for colonic imaging.

ANOPP programming and documentation standards document

NASA Technical Reports Server (NTRS)

1976-01-01

Standards defining the requirements for preparing software for the Aircraft Noise Prediction Program (ANOPP) were given. It is the intent of these standards to provide definition, design, coding, and documentation criteria for the achievement of a unity among ANOPP products. These standards apply to all of ANOPP's standard software system. The standards encompass philosophy as well as techniques and conventions.

Aerial Refueling Clearance Initiation Request

DTIC Science & Technology

2016-07-14

and receiver agencies. The AR Clearance Initiation Request document recognizes the requirement for definitive aerial refueling agreements between...and contractual tanker support requests from one organization or nation to another. The AR Clearance Initiation Request document is not intended to...proprietary, sensitive, classified or otherwise restricted information. ARSAG documents, as prepared, are not DOD, MOD or NATO standards, but provide

Apprentice and Trainee Destinations 2010: Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

This document covers the data terms used in the "Apprentice and Trainee Destinations Survey, 2010" report and its associated data tables. The primary purpose of this document is to assist users of the report to understand the specific data terms used within it. Terms that appear in the report are listed in alphabetical order with the…

Apprentices and Trainees: Early Trend Estimates, December 2010: Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2011

2011-01-01

This document covers the data terms used in the "Australian Vocational Education and Training Statistics: Apprentices and Trainees--Early Trend Estimates December 2010" publication. The primary purpose of this document is to assist users of the report to understand the specific data terms used within it. Terms that appear in the report…

Apprentices and Trainees: March Quarter 2010. Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

This document covers the data terms used in the "Apprentices and Trainees: March quarter 2010" publication and its associated data tables. The primary purpose of this document is to assist users of the publication to understand the specific data terms used within it. Terms that appear in the publication are listed in alphabetical order…

Students and Courses 2009: Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

This document covers the data terms used in the "Students and Courses 2009" publication and its associated data tables. The primary purpose of this document is to assist users of the publication to understand the specific data terms used within it. Terms that appear in the publication are listed in alphabetical order with the following…

Apprentices and Trainees: September Quarter 2010. Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2011

2011-01-01

This document covers the data terms used in the "Apprentices and Trainees: September Quarter 2010" publication and its associated data tables. The primary purpose of this document is to assist users of the publication to understand the specific data terms used within it. Terms that appear in the publication are listed in alphabetical…

Apprentices and Trainees: Annual, 2009. Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

This document covers the data terms used in the "Apprentices and trainees: Annual 2009" publication and its associated data tables. The primary purpose of this document is to assist users of the publication to understand the specific data terms used within it. Terms that appear in the publication are listed in alphabetical order with the…

Defining delirium for the International Classification of Diseases, 11th Revision.

PubMed

Meagher, David J; Maclullich, Alasdair M J; Laurila, Jouko V

2008-09-01

The development of ICD-11 provides an opportunity to update the description of delirium according to emerging data that have added to our understanding of this complex neuropsychiatric syndrome. Synthetic article based on published work considered by the authors to be relevant to the definition of delirium. The current DSM-IV definition of delirium is preferred to the ICD-10 because of its greater inclusivity. Evidence does not support major changes in the principal components of present definitions but a number of key issues for the updated definition were identified. These include better account of non-cognitive features, more guidance for rating contextual diagnostic items, clearer definition regarding the interface with dementia, and accounting for illness severity, clinical subtypes and course. Development of the ICD definition of delirium can allow for more targeted research and clinical effort.

49 CFR 109.1 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., in the prevention, treatment, or cure of a disease or condition in human beings or animals where... same hazard communications information (marking, labeling, shipping documentation); or other reasonable... manufacturer, marking, labeling, shipping documentation, hazard communications, etc. Remove means to keep a...

AVCS Simulator Test Plan and Design Guide

NASA Technical Reports Server (NTRS)

Shelden, Stephen

2001-01-01

Internal document for communication of AVCS direction and documentation of simulator functionality. Discusses methods for AVCS simulation evaluation of pilot functions, implementation strategy of varying functional representation of pilot tasks (by instantiations of a base AVCS to reasonably approximate the interface of various vehicles -- e.g. Altair, GlobalHawk, etc.).

DocCube: Multi-Dimensional Visualization and Exploration of Large Document Sets.

ERIC Educational Resources Information Center

Mothe, Josiane; Chrisment, Claude; Dousset, Bernard; Alaux, Joel

2003-01-01

Describes a user interface that provides global visualizations of large document sets to help users formulate the query that corresponds to their information needs. Highlights include concept hierarchies that users can browse to specify and refine information needs; knowledge discovery in databases and texts; and multidimensional modeling.…

Automation of the CAS Document Delivery Service.

ERIC Educational Resources Information Center

Steensland, M. C.; Soukup, K. M.

1986-01-01

The automation of online order retrieval for Chemical Abstracts Service Document Delivery Service was accomplished by shifting to an order retrieval/dispatch process linked to a Unix network. The Unix-based environment, its terminal emulation, page-break, and user-friendly interface software, and later enhancements are reviewed. Resultant increase…

Computerized procedures system

DOEpatents

Lipner, Melvin H.; Mundy, Roger A.; Franusich, Michael D.

2010-10-12

An online data driven computerized procedures system that guides an operator through a complex process facility's operating procedures. The system monitors plant data, processes the data and then, based upon this processing, presents the status of the current procedure step and/or substep to the operator. The system supports multiple users and a single procedure definition supports several interface formats that can be tailored to the individual user. Layered security controls access privileges and revisions are version controlled. The procedures run on a server that is platform independent of the user workstations that the server interfaces with and the user interface supports diverse procedural views.

Automation Hooks Architecture for Flexible Test Orchestration - Concept Development and Validation

NASA Technical Reports Server (NTRS)

Lansdowne, C. A.; Maclean, John R.; Winton, Chris; McCartney, Pat

2011-01-01

The Automation Hooks Architecture Trade Study for Flexible Test Orchestration sought a standardized data-driven alternative to conventional automated test programming interfaces. The study recommended composing the interface using multicast DNS (mDNS/SD) service discovery, Representational State Transfer (Restful) Web Services, and Automatic Test Markup Language (ATML). We describe additional efforts to rapidly mature the Automation Hooks Architecture candidate interface definition by validating it in a broad spectrum of applications. These activities have allowed us to further refine our concepts and provide observations directed toward objectives of economy, scalability, versatility, performance, severability, maintainability, scriptability and others.

An ASM/ADM model interface for dynamic plant-wide simulation.

PubMed

Nopens, Ingmar; Batstone, Damien J; Copp, John B; Jeppsson, Ulf; Volcke, Eveline; Alex, Jens; Vanrolleghem, Peter A

2009-04-01

Mathematical modelling has proven to be very useful in process design, operation and optimisation. A recent trend in WWTP modelling is to include the different subunits in so-called plant-wide models rather than focusing on parts of the entire process. One example of a typical plant-wide model is the coupling of an upstream activated sludge plant (including primary settler, and secondary clarifier) to an anaerobic digester for sludge digestion. One of the key challenges when coupling these processes has been the definition of an interface between the well accepted activated sludge model (ASM1) and anaerobic digestion model (ADM1). Current characterisation and interface models have key limitations, the most critical of which is the over-use of X(c) (or lumped complex) variable as a main input to the ADM1. Over-use of X(c) does not allow for variation of degradability, carbon oxidation state or nitrogen content. In addition, achieving a target influent pH through the proper definition of the ionic system can be difficult. In this paper, we define an interface and characterisation model that maps degradable components directly to carbohydrates, proteins and lipids (and their soluble analogues), as well as organic acids, rather than using X(c). While this interface has been designed for use with the Benchmark Simulation Model No. 2 (BSM2), it is widely applicable to ADM1 input characterisation in general. We have demonstrated the model both hypothetically (BSM2), and practically on a full-scale anaerobic digester treating sewage sludge.

Biotea: RDFizing PubMed Central in support for the paper as an interface to the Web of Data

PubMed Central

2013-01-01

Background The World Wide Web has become a dissemination platform for scientific and non-scientific publications. However, most of the information remains locked up in discrete documents that are not always interconnected or machine-readable. The connectivity tissue provided by RDF technology has not yet been widely used to support the generation of self-describing, machine-readable documents. Results In this paper, we present our approach to the generation of self-describing machine-readable scholarly documents. We understand the scientific document as an entry point and interface to the Web of Data. We have semantically processed the full-text, open-access subset of PubMed Central. Our RDF model and resulting dataset make extensive use of existing ontologies and semantic enrichment services. We expose our model, services, prototype, and datasets at http://biotea.idiginfo.org/ Conclusions The semantic processing of biomedical literature presented in this paper embeds documents within the Web of Data and facilitates the execution of concept-based queries against the entire digital library. Our approach delivers a flexible and adaptable set of tools for metadata enrichment and semantic processing of biomedical documents. Our model delivers a semantically rich and highly interconnected dataset with self-describing content so that software can make effective use of it. PMID:23734622

Source Definition for Colonial Terminals, Inc.

EPA Pesticide Factsheets

This document may be of assistance in applying the Title V air operating permit regulations. This document is part of the Title V Policy and Guidance Database available at www2.epa.gov/title-v-operating-permits/title-v-operating-permit-policy-and-guidance-document-index. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Definition of Source

EPA Pesticide Factsheets

This document may be of assistance in applying the Title V air operating permit regulations. This document is part of the Title V Policy and Guidance Database available at www2.epa.gov/title-v-operating-permits/title-v-operating-permit-policy-and-guidance-document-index. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

PSD Definition of Source

EPA Pesticide Factsheets

This document may be of assistance in applying the Title V air operating permit regulations. This document is part of the Title V Policy and Guidance Database available at www2.epa.gov/title-v-operating-permits/title-v-operating-permit-policy-and-guidance-document-index. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

PSD Definition of Source

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

PSD Definition of Modification

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Guidance on the Definition of Fuel Conversion Plants

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

4/5/95 Letter on Definition of Major Source

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

PSD Determination: Sun Oil Company and the Definition of Major Modification

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Factors in Software Quality. Volume I. Concepts and Definitions of Software Quality

DTIC Science & Technology

1977-11-01

FLEXIBILITY COMPLEXITY EXPANDABILITY PRECISION DOCUMENTATION TOLERANCE REPAIRABILITY COMPATABIL ITY SERVICEABILITY 2-4 AiI1I~3~I!-T A1 11 NI󈧥 AIiB 9l 0...applications. Several standard documents are required by DOD/AF’ regulations . The following references were used to compile the rFpnge of documents...documents are specified by the AF regulations or SPO-local regulations listed above. Each ot the document types for a long life/high cost software

Definition of Installation in Nonattainment Regulations

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Definition of Postapproval Monitoring

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Plantwide Definition Of Major Stationary Sources Of Air Pollution

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Request For Further Clarification on EPA's Definition of Ambient Air

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

EPA Definition of Pollution Prevention

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

An audit of the use of definitions of sudden infant death syndrome (SIDS).

PubMed

Byard, Roger W; Marshall, Drew

2007-11-01

Given that there are a number of contradictions in the SIDS literature and that the definition of SIDS that was relied upon to authenticate cases in reports is not always specified, an audit of publications was undertaken. Fifty papers dealing with SIDS that were published in 2005 were reviewed. The majority (58%) of reports had either not specified a definition of SIDS, or had used non-standard or idiosyncratic definitions. Of the papers that had documented a definition: 30% used the 1989 NICHD definition, 10% used the 2004 San Diego definition, and 2% used the 1969 Seattle definition. Failure to use standard published definitions of SIDS and/or to clearly specify the definition that has been followed may severely hamper the evaluation of SIDS research.

45 CFR 160.103 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., the following definitions apply to this subchapter: Act means the Social Security Act. ANSI stands for... required documents. Electronic media means: (1) Electronic storage media including memory devices in computers (hard drives) and any removable/transportable digital memory medium, such as magnetic tape or disk...

45 CFR 160.103 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., the following definitions apply to this subchapter: Act means the Social Security Act. ANSI stands for... required documents. Electronic media means: (1) Electronic storage media including memory devices in computers (hard drives) and any removable/transportable digital memory medium, such as magnetic tape or disk...

12 CFR 1214.1 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Banking FEDERAL HOUSING FINANCE AGENCY ORGANIZATION AND OPERATIONS AVAILABILITY OF NON-PUBLIC INFORMATION § 1214.1 Definitions. Confidential supervisory information means information prepared or received by FHFA that meets all of the following criteria: (1) The information is not a document prepared by a regulated...

30 CFR 250.200 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Information Document CZMA means Coastal Zone Management Act DOCD means Development Operations Coordination... OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Plans and Information General Information § 250.200 Definitions. Acronyms and terms used in this subpart have the following meanings: (a...

45 CFR 160.103 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., the following definitions apply to this subchapter: Act means the Social Security Act. ANSI stands for... required documents. Electronic media means: (1) Electronic storage media including memory devices in computers (hard drives) and any removable/transportable digital memory medium, such as magnetic tape or disk...

12 CFR 1410.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... particular loan constitutes an independent credit risk and such determination is adequately documented in the... Banking FARM CREDIT SYSTEM INSURANCE CORPORATION PREMIUMS § 1410.2 Definitions. (a) Act means the Farm Credit Act of 1971, as amended. (b) Average principal outstanding means the average annual principal...

7 CFR 1944.403 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... education, community action agencies and other self-help grantees. Also, when available, regional technical... REGULATIONS (CONTINUED) HOUSING Self-Help Technical Assistance Grants § 1944.403 Definitions. (a) Agreement. The Self-Help Technical Assistance Agreement, which is a document signed by FmHA or its successor...

7 CFR 1944.403 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... education, community action agencies and other self-help grantees. Also, when available, regional technical... REGULATIONS (CONTINUED) HOUSING Self-Help Technical Assistance Grants § 1944.403 Definitions. (a) Agreement. The Self-Help Technical Assistance Agreement, which is a document signed by FmHA or its successor...

7 CFR 1944.403 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... education, community action agencies and other self-help grantees. Also, when available, regional technical... REGULATIONS (CONTINUED) HOUSING Self-Help Technical Assistance Grants § 1944.403 Definitions. (a) Agreement. The Self-Help Technical Assistance Agreement, which is a document signed by FmHA or its successor...

7 CFR 1944.403 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... education, community action agencies and other self-help grantees. Also, when available, regional technical... REGULATIONS (CONTINUED) HOUSING Self-Help Technical Assistance Grants § 1944.403 Definitions. (a) Agreement. The Self-Help Technical Assistance Agreement, which is a document signed by FmHA or its successor...

7 CFR 1944.403 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... education, community action agencies and other self-help grantees. Also, when available, regional technical... REGULATIONS (CONTINUED) HOUSING Self-Help Technical Assistance Grants § 1944.403 Definitions. (a) Agreement. The Self-Help Technical Assistance Agreement, which is a document signed by FmHA or its successor...

48 CFR 28.001 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Definitions. 28.001 Section 28.001 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING... types of bonds and related documents are as follows: (1) An advance payment bond secures fulfillment of...

48 CFR 28.001 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 1 2012-10-01 2012-10-01 false Definitions. 28.001 Section 28.001 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING... types of bonds and related documents are as follows: (1) An advance payment bond secures fulfillment of...

48 CFR 28.001 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 1 2014-10-01 2014-10-01 false Definitions. 28.001 Section 28.001 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING... types of bonds and related documents are as follows: (1) An advance payment bond secures fulfillment of...

48 CFR 28.001 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Definitions. 28.001 Section 28.001 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING... types of bonds and related documents are as follows: (1) An advance payment bond secures fulfillment of...

Closing the loop in ICU decision support: physiologic event detection, alerts, and documentation.

PubMed Central

Norris, P. R.; Dawant, B. M.

2001-01-01

Automated physiologic event detection and alerting is a challenging task in the ICU. Ideally care providers should be alerted only when events are clinically significant and there is opportunity for corrective action. However, the concepts of clinical significance and opportunity are difficult to define in automated systems, and effectiveness of alerting algorithms is difficult to measure. This paper describes recent efforts on the Simon project to capture information from ICU care providers about patient state and therapy in response to alerts, in order to assess the value of event definitions and progressively refine alerting algorithms. Event definitions for intracranial pressure and cerebral perfusion pressure were studied by implementing a reliable system to automatically deliver alerts to clinical users alphanumeric pagers, and to capture associated documentation about patient state and therapy when the alerts occurred. During a 6-month test period in the trauma ICU at Vanderbilt University Medical Center, 530 alerts were detected in 2280 hours of data spanning 14 patients. Clinical users electronically documented 81% of these alerts as they occurred. Retrospectively classifying documentation based on therapeutic actions taken, or reasons why actions were not taken, provided useful information about ways to potentially improve event definitions and enhance system utility. PMID:11825238

A Natural Language Processing System That Links Medical Terms in Electronic Health Record Notes to Lay Definitions: System Development Using Physician Reviews

PubMed Central

Druhl, Emily; Polepalli Ramesh, Balaji; Houston, Thomas K; Brandt, Cynthia A; Zulman, Donna M; Vimalananda, Varsha G; Malkani, Samir; Yu, Hong

2018-01-01

Background Many health care systems now allow patients to access their electronic health record (EHR) notes online through patient portals. Medical jargon in EHR notes can confuse patients, which may interfere with potential benefits of patient access to EHR notes. Objective The aim of this study was to develop and evaluate the usability and content quality of NoteAid, a Web-based natural language processing system that links medical terms in EHR notes to lay definitions, that is, definitions easily understood by lay people. Methods NoteAid incorporates two core components: CoDeMed, a lexical resource of lay definitions for medical terms, and MedLink, a computational unit that links medical terms to lay definitions. We developed innovative computational methods, including an adapted distant supervision algorithm to prioritize medical terms important for EHR comprehension to facilitate the effort of building CoDeMed. Ten physician domain experts evaluated the user interface and content quality of NoteAid. The evaluation protocol included a cognitive walkthrough session and a postsession questionnaire. Physician feedback sessions were audio-recorded. We used standard content analysis methods to analyze qualitative data from these sessions. Results Physician feedback was mixed. Positive feedback on NoteAid included (1) Easy to use, (2) Good visual display, (3) Satisfactory system speed, and (4) Adequate lay definitions. Opportunities for improvement arising from evaluation sessions and feedback included (1) improving the display of definitions for partially matched terms, (2) including more medical terms in CoDeMed, (3) improving the handling of terms whose definitions vary depending on different contexts, and (4) standardizing the scope of definitions for medicines. On the basis of these results, we have improved NoteAid’s user interface and a number of definitions, and added 4502 more definitions in CoDeMed. Conclusions Physician evaluation yielded useful feedback for content validation and refinement of this innovative tool that has the potential to improve patient EHR comprehension and experience using patient portals. Future ongoing work will develop algorithms to handle ambiguous medical terms and test and evaluate NoteAid with patients. PMID:29358159

IGDS/TRAP Interface Program (ITIP). Software Design Document

NASA Technical Reports Server (NTRS)

Jefferys, Steve; Johnson, Wendell

1981-01-01

The preliminary design of the IGDS/TRAP Interface Program (ITIP) is described. The ITIP is implemented on the PDP 11/70 and interfaces directly with the Interactive Graphics Design System and the Data Management and Retrieval System. The program provides an efficient method for developing a network flow diagram. Performance requirements, operational rquirements, and design requirements are discussed along with sources and types of input and destination and types of output. Information processing functions and data base requirements are also covered.

Shuttle payload interface verification equipment study. Volume 2: Technical document, part 1

NASA Technical Reports Server (NTRS)

1976-01-01

The technical analysis is reported that was performed during the shuttle payload interface verification equipment study. It describes: (1) the background and intent of the study; (2) study approach and philosophy covering all facets of shuttle payload/cargo integration; (3)shuttle payload integration requirements; (4) preliminary design of the horizontal IVE; (5) vertical IVE concept; and (6) IVE program development plans, schedule and cost. Also included is a payload integration analysis task to identify potential uses in addition to payload interface verification.

GRIZZLY/FAVOR Interface Project Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dickson, Terry L; Williams, Paul T; Yin, Shengjun

As part of the Light Water Reactor Sustainability (LWRS) Program, the objective of the GRIZZLY/FAVOR Interface project is to create the capability to apply GRIZZLY 3-D finite element (thermal and stress) analysis results as input to FAVOR probabilistic fracture mechanics (PFM) analyses. The one benefit of FAVOR to Grizzly is the PROBABILISTIC capability. This document describes the implementation of the GRIZZLY/FAVOR Interface, the preliminary verification and tests results and a user guide that provides detailed step-by-step instructions to run the program.

Advanced extravehicular activity systems requirements definition study. Phase 2: Extravehicular activity at a lunar base

NASA Technical Reports Server (NTRS)

Neal, Valerie; Shields, Nicholas, Jr.; Carr, Gerald P.; Pogue, William; Schmitt, Harrison H.; Schulze, Arthur E.

1988-01-01

The focus is on Extravehicular Activity (EVA) systems requirements definition for an advanced space mission: remote-from-main base EVA on the Moon. The lunar environment, biomedical considerations, appropriate hardware design criteria, hardware and interface requirements, and key technical issues for advanced lunar EVA were examined. Six remote EVA scenarios (three nominal operations and three contingency situations) were developed in considerable detail.

Equivalence of different definitions of the surface tension

NASA Astrophysics Data System (ADS)

Jug, Giancarlo; Jasnow, David

1985-02-01

Recently Brézin and Feng and independently Pant reported renormalization-group calculations of a universal amplitude ratio involving the surface tension, σ, defined as the free-energy difference produced by appropriate boundary conditions. Here we comment on an equivalent result obtained, within the same one-loop framework, using an alternative definition of σ involving the free-energy increment due to a macroscopic distortion of a flat interface.

Natural brain-information interfaces: Recommending information by relevance inferred from human brain signals

PubMed Central

Eugster, Manuel J. A.; Ruotsalo, Tuukka; Spapé, Michiel M.; Barral, Oswald; Ravaja, Niklas; Jacucci, Giulio; Kaski, Samuel

2016-01-01

Finding relevant information from large document collections such as the World Wide Web is a common task in our daily lives. Estimation of a user’s interest or search intention is necessary to recommend and retrieve relevant information from these collections. We introduce a brain-information interface used for recommending information by relevance inferred directly from brain signals. In experiments, participants were asked to read Wikipedia documents about a selection of topics while their EEG was recorded. Based on the prediction of word relevance, the individual’s search intent was modeled and successfully used for retrieving new relevant documents from the whole English Wikipedia corpus. The results show that the users’ interests toward digital content can be modeled from the brain signals evoked by reading. The introduced brain-relevance paradigm enables the recommendation of information without any explicit user interaction and may be applied across diverse information-intensive applications. PMID:27929077

Clinical Documents: Attribute-Values Entity Representation, Context, Page Layout And Communication

PubMed Central

Lovis, Christian; Lamb, Alexander; Baud, Robert; Rassinoux, Anne-Marie; Fabry, Paul; Geissbühler, Antoine

2003-01-01

This paper presents how acquisition, storage and communication of clinical documents are implemented at the University Hospitals of Geneva. Careful attention has been given to user-interfaces, in order to support complex layouts, spell checking, templates management with automatic prefilling in order to facilitate acquisition. A dual architecture has been developed for storage using an attributes-values entity unified database and a consolidated, patient-centered, layout-respectful files-based storage, providing both representation power and sinsert (peed of accesses. This architecture allows great flexibility to store a continuum of data types from simple type values up to complex clinical reports. Finally, communication is entirely based on HTTP-XML internally and a HL-7 CDA interface V2 is currently studied for external communication. Some of the problem encountered, mostly concerning the typology of documents and the ontology of clinical attributes are evoked. PMID:14728202

ATM Technology Demonstration-1 Phase II Boeing Configurable Graphical Display (CGD) Software Design Description

NASA Technical Reports Server (NTRS)

Wilber, George F.

2017-01-01

This Software Description Document (SDD) captures the design for developing the Flight Interval Management (FIM) system Configurable Graphics Display (CGD) software. Specifically this SDD describes aspects of the Boeing CGD software and the surrounding context and interfaces. It does not describe the Honeywell components of the CGD system. The SDD provides the system overview, architectural design, and detailed design with all the necessary information to implement the Boeing components of the CGD software and integrate them into the CGD subsystem within the larger FIM system. Overall system and CGD system-level requirements are derived from the CGD SRS (in turn derived from the Boeing System Requirements Design Document (SRDD)). Display and look-and-feel requirements are derived from Human Machine Interface (HMI) design documents and working group recommendations. This Boeing CGD SDD is required to support the upcoming Critical Design Review (CDR).

Natural brain-information interfaces: Recommending information by relevance inferred from human brain signals

NASA Astrophysics Data System (ADS)

Eugster, Manuel J. A.; Ruotsalo, Tuukka; Spapé, Michiel M.; Barral, Oswald; Ravaja, Niklas; Jacucci, Giulio; Kaski, Samuel

2016-12-01

Finding relevant information from large document collections such as the World Wide Web is a common task in our daily lives. Estimation of a user’s interest or search intention is necessary to recommend and retrieve relevant information from these collections. We introduce a brain-information interface used for recommending information by relevance inferred directly from brain signals. In experiments, participants were asked to read Wikipedia documents about a selection of topics while their EEG was recorded. Based on the prediction of word relevance, the individual’s search intent was modeled and successfully used for retrieving new relevant documents from the whole English Wikipedia corpus. The results show that the users’ interests toward digital content can be modeled from the brain signals evoked by reading. The introduced brain-relevance paradigm enables the recommendation of information without any explicit user interaction and may be applied across diverse information-intensive applications.

Meteorological Support Interface Control Working Group (MSICWG) Instrumentation, Data Format, and Networks Document

NASA Technical Reports Server (NTRS)

Brenton, James; Roberts, Barry C.

2017-01-01

The purpose of this document is to provide an overview of instrumentation discussed at the Meteorological Interface Control Working Group (MSICWG), a reference for data formats currently used by members of the group, a summary of proposed formats for future use by the group, an overview of the data networks of the group's members. This document will be updated as new systems are introduced, old systems are retired, and when the MSICWG community necessitates a change to the formats. The MSICWG consists of personnel from the National Aeronautics and Space Administration (NASA) Kennedy Space Center (KSC), NASA Marshall Space Flight Center (MSFC), NASA Johnson Space Center (JSC), National Oceanic and Atmospheric Administration National Weather Service Spaceflight Meteorology Group (SMG), and the United States Air Force (USAF) 45th Space Wing and Weather Squadron. The purpose of the group is to coordinate the distribution of weather related data to support NASA space launch related activities.

Drug reaction with eosinophilia and systemic symptoms (DRESS): A histopathology based analysis.

PubMed

Sasidharanpillai, Sarita; Govindan, Aparna; Riyaz, Najeeba; Binitha, Manikoth P; Muhammed, Kunnummal; Khader, Anza; Reena Mariyath, Olasseri K; Simin, Muhammedkutty; Subin, Kunnari

2016-01-01

The data on the histology of cutaneous lesions of drug reaction with eosinophilia and systemic symptoms (DRESS) is limited. To study the histopathology of cutaneous lesions of drug reaction with eosinophilia and systemic symptoms (DRESS) and to identify any features with diagnostic or prognostic significance. All patients admitted to the dermatology ward of government medical college, Kozhikode from January 1, 2014 to December 31, 2014 with probable or definite DRESS as per the RegiSCAR scoring system and who were willing to undergo skin biopsy were included in this prospective study. The study population comprised of nine patients. The consistent histological finding documented was the predominantly lymphocytic dermal inflammatory infiltrate. Four of the five patients whose histology revealed focal interface dermatitis and keratinocyte vacuolation with or without apoptotic keratinocytes, had elevated liver transaminases. Tissue eosinophilia was associated with disease flares. The presence of atypical lymphocytes in peripheral smear and histological evidence of dense dermal inflammatory infiltrate showed an association with hepatic involvement. The main limitations of our study were the small sample size and our inability to carry out a detailed immunohistochemistry work-up. In the appropriate setting, varying combinations of epidermal hyperplasia, spongiosis, parakeratosis and individually necrotic keratinocytes in the background of lymphocyte predominant dermal infiltrate (with some atypia) favor a diagnosis of drug reaction with eosinophilia and systemic symptoms. Female sex, the presence of atypical lymphocytes in peripheral smear, dense dermal inflammatory infiltrate, tissue eosinophilia and interface dermatitis with or without keratinocyte necrosis was associated with a poor prognosis.

Space Station Furnace Facility Core. Requirements definition and conceptual design study. Volume 2: Technical report. Appendix 6: Technical summary reports

NASA Technical Reports Server (NTRS)

1992-01-01

The Space Station Furnace Facility (SSFF) is a modular facility for materials research in the microgravity environment of the Space Station Freedom (SSF). The SSFF is designed for crystal growth and solidification research in the fields of electronic and photonic materials, metals and alloys, and glasses and ceramics and will allow for experimental determination of the role of gravitational forces in the solidification process. The facility will provide a capability for basic scientific research and will evaluate the commercial viability of low-gravity processing of selected technologically important materials. The facility is designed to support a complement of furnace modules as outlined in the Science Capabilities Requirements Document (SCRD). The SSFF is a three rack facility that provides the functions, interfaces, and equipment necessary for the processing of the furnaces and consists of two main parts: the SSFF Core Rack and the two Experiment Racks. The facility is designed to accommodate two experimenter-provided furnace modules housed within the two experiment racks, and is designed to operate these two furnace modules simultaneously. The SCRD specifies a wide range of furnace requirements and serves as the basis for the SSFF conceptual design. SSFF will support automated processing during the man-tended operations and is also designed for crew interface during the permanently manned configuration. The facility is modular in design and facilitates changes as required, so the SSFF is adept to modifications, maintenance, reconfiguration, and technology evolution.

Pathogens at the livestock-wildlife interface in Western Alberta: does transmission route matter?

PubMed Central

2014-01-01

In southwestern Alberta, interactions between beef cattle and free-ranging elk (Cervus elaphus) may provide opportunities for pathogen transmission. To assess the importance of the transmission route on the potential for interspecies transmission, we conducted a cross-sectional study on four endemic livestock pathogens with three different transmission routes: Bovine Viral Diarrhea Virus and Bovine Herpesvirus 1 (predominantly direct transmission), Mycobacterium avium subsp. paratuberculosis (MAP) (indirect fecal-oral transmission), Neospora caninum (indirect transmission with definitive host). We assessed the occurrence of these pathogens in 28 cow-calf operations exposed or non-exposed to elk, and in 10 elk herds exposed or not to cattle. We characterized the effect of species commingling as a risk factor of pathogen exposure and documented the perceived risk of pathogen transmission at this wildlife-livestock interface in the rural community. Herpesviruses found in elk were elk-specific gamma-herpesviruses unrelated to cattle viruses. Pestivirus exposure in elk could not be ascertained to be of livestock origin. Evidence of MAP circulation was found in both elk and cattle, but there was no statistical effect of the species commingling. Finally, N. caninum was more frequently detected in elk exposed to cattle and this association was still significant after adjustment for herd and sampling year clustering, and individual elk age and sex. Only indirectly transmitted pathogens co-occurred in cattle and elk, indicating the potential importance of the transmission route in assessing the risk of pathogen transmission in multi-species grazing systems. PMID:24517283

Real-Time Extended Interface Automata for Software Testing Cases Generation

PubMed Central

Yang, Shunkun; Xu, Jiaqi; Man, Tianlong; Liu, Bin

2014-01-01

Testing and verification of the interface between software components are particularly important due to the large number of complex interactions, which requires the traditional modeling languages to overcome the existing shortcomings in the aspects of temporal information description and software testing input controlling. This paper presents the real-time extended interface automata (RTEIA) which adds clearer and more detailed temporal information description by the application of time words. We also establish the input interface automaton for every input in order to solve the problems of input controlling and interface covering nimbly when applied in the software testing field. Detailed definitions of the RTEIA and the testing cases generation algorithm are provided in this paper. The feasibility and efficiency of this method have been verified in the testing of one real aircraft braking system. PMID:24892080

Solid Waste Program technical baseline description

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carlson, A.B.

1994-07-01

The system engineering approach has been taken to describe the technical baseline under which the Solid Waste Program is currently operating. The document contains a mission analysis, function analysis, system definition, documentation requirements, facility and project bases, and uncertainties facing the program.

5 CFR 1201.4 - General definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... documents associated with electronic filings under paragraph (h) of § 1201.14, on the MSPB. (l) Date of... date of electronic submission. (m) Electronic filing (e-filing). Filing and receiving documents in... of Personnel Management reconsideration decisions concerning retirement benefits, and appeals of...

5 CFR 1201.4 - General definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... documents associated with electronic filings under paragraph (h) of § 1201.14, on the MSPB. (l) Date of... date of electronic submission. (m) Electronic filing (e-filing). Filing and receiving documents in... of Personnel Management reconsideration decisions concerning retirement benefits, and appeals of...

Specification of the Transmitted Signal of the U.S. Marine Radiobeacon System

DOT National Transportation Integrated Search

1983-01-01

This report documents the specification of the transmitted signal of the U.S. Marine Radiobeacon System. It is intended as a reference document consisting of specifications, definitions, and explanations for general use by designers, manufacturers, a...

Executive overview and introduction to the SMAP information system life-cycle and documentation standards

NASA Technical Reports Server (NTRS)

1989-01-01

An overview of the five volume set of Information System Life-Cycle and Documentation Standards is provided with information on its use. The overview covers description, objectives, key definitions, structure and application of the standards, and document structure decisions. These standards were created to provide consistent NASA-wide structures for coordinating, controlling, and documenting the engineering of an information system (hardware, software, and operational procedures components) phase by phase.

76 FR 23630 - Office of New Reactors; Proposed Revision 2 to Standard Review Plan, Section 1.0 on Introduction...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-27

... Standard Review Plan, Section 1.0 on Introduction and Interfaces AGENCY: Nuclear Regulatory Commission (NRC... Revision 2 to Standard Review Plan (SRP), Section 1.0, ``Introduction and Interfaces'' (Agencywide Documents Access and Management System (ADAMS) Accession No. ML110110573). The Office of New Reactors (NRO...

76 FR 77025 - Office of New Reactors; Notice of Availability of the Final Staff Guidance Section 1.0, Revision...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-09

... the Final Staff Guidance Section 1.0, Revision 2 on Introduction and Interfaces AGENCY: Nuclear... Plants: LWR Edition,'' Section 1.0, Revision 2 on ``Introduction and Interfaces'' (Agencywide Documents Access and Management System (ADAMS) Accession No. ML112730393). The NRC staff issues revisions to SRP...

Guide to the Stand-Damage Model interface management system

Treesearch

George Racin; J. J. Colbert

1995-01-01

This programmer's support document describes the Gypsy Moth Stand-Damage Model interface management system. Management of stand-damage data made it necessary to define structures to store data and provide the mechanisms to manipulate these data. The software provides a user-friendly means to manipulate files, graph and manage outputs, and edit input data. The...

Drone Mission Definition and Implementation for Automated Infrastructure Inspection Using Airborne Sensors

PubMed Central

Besada, Juan A.; Bergesio, Luca; Campaña, Iván; Vaquero-Melchor, Diego; Bernardos, Ana M.; Casar, José R.

2018-01-01

This paper describes a Mission Definition System and the automated flight process it enables to implement measurement plans for discrete infrastructure inspections using aerial platforms, and specifically multi-rotor drones. The mission definition aims at improving planning efficiency with respect to state-of-the-art waypoint-based techniques, using high-level mission definition primitives and linking them with realistic flight models to simulate the inspection in advance. It also provides flight scripts and measurement plans which can be executed by commercial drones. Its user interfaces facilitate mission definition, pre-flight 3D synthetic mission visualisation and flight evaluation. Results are delivered for a set of representative infrastructure inspection flights, showing the accuracy of the flight prediction tools in actual operations using automated flight control. PMID:29641506

Drone Mission Definition and Implementation for Automated Infrastructure Inspection Using Airborne Sensors.

PubMed

Besada, Juan A; Bergesio, Luca; Campaña, Iván; Vaquero-Melchor, Diego; López-Araquistain, Jaime; Bernardos, Ana M; Casar, José R

2018-04-11

This paper describes a Mission Definition System and the automated flight process it enables to implement measurement plans for discrete infrastructure inspections using aerial platforms, and specifically multi-rotor drones. The mission definition aims at improving planning efficiency with respect to state-of-the-art waypoint-based techniques, using high-level mission definition primitives and linking them with realistic flight models to simulate the inspection in advance. It also provides flight scripts and measurement plans which can be executed by commercial drones. Its user interfaces facilitate mission definition, pre-flight 3D synthetic mission visualisation and flight evaluation. Results are delivered for a set of representative infrastructure inspection flights, showing the accuracy of the flight prediction tools in actual operations using automated flight control.

Earth Observatory Satellite system definition study. Report no. 2: Instrument constraints and interface specifications

NASA Technical Reports Server (NTRS)

1974-01-01

The instruments to be flown on the Earth Observatory Satellite (EOS) system are defined. The instruments will be used to support the Land Resources Management (LRM) mission of the EOS. Program planning information and suggested acquisition activities for obtaining the instruments are presented. The subjects considered are as follows: (1) the performance and interface of the Thematic Mapper (TM) and the High Resolution Pointing Imager (HRPI), (2) procedure for interfacing the TM and HRPI with the EOS satellite, (3) a space vehicle integration plan suggesting the steps and sequence of events required to carry out the interface activities, and (4) suggested agreements between the contractors for providing timely and equitable solution of problems at minimum cost.

Redefining Myocardial Infarction: What Is New In The ESC/ACCF/AHA/WHF Third Universal Definition Of Myocardial Infarction?

PubMed Central

Alam, Mahboob; Virani, Salim S.; Bozkurt, Biykem

2013-01-01

Myocardial infarction (MI) is a major cause of mortality and morbidity worldwide. Each year, an estimated 785,000 persons will have a new MI in the United States alone, and approximately every minute an American will succumb to one.1 In addition, MI has major psychological and legal implications for patients and the society and is an important outcome measure in research studies. The prevalence of MI provides useful data regarding the burden of coronary artery disease and offers insight into health care planning, policy, and resource allocation. The importance of accurately and reproducibly defining MI is therefore self-evident. The Third Universal Definition of Myocardial Infarction (MI) expert consensus document was published in October 2012 by the global Myocardial Infarction Task Force.2 This landmark document was cosponsored by multiple cardiovascular societies and included both updated definitions and a modified classification of MI that have important clinical, epidemiological, and research implications. We hereby present a critical overview of this important document and summarize its key recommendations. PMID:24066201

Redefining myocardial infarction: what is new in the ESC/ACCF/AHA/WHF Third Universal Definition of myocardial infarction?

PubMed

Jneid, Hani; Alam, Mahboob; Virani, Salim S; Bozkurt, Biykem

2013-01-01

Myocardial infarction (MI) is a major cause of mortality and morbidity worldwide. Each year, an estimated 785,000 persons will have a new MI in the United States alone, and approximately every minute an American will succumb to one.1 In addition, MI has major psychological and legal implications for patients and the society and is an important outcome measure in research studies. The prevalence of MI provides useful data regarding the burden of coronary artery disease and offers insight into health care planning, policy, and resource allocation. The importance of accurately and reproducibly defining MI is therefore self-evident. The Third Universal Definition of Myocardial Infarction (MI) expert consensus document was published in October 2012 by the global Myocardial Infarction Task Force.2 This landmark document was cosponsored by multiple cardiovascular societies and included both updated definitions and a modified classification of MI that have important clinical, epidemiological, and research implications. We hereby present a critical overview of this important document and summarize its key recommendations.

Using GIS servers and interactive maps in spectral data sharing and administration: Case study of Ahvaz Spectral Geodatabase Platform (ASGP)

NASA Astrophysics Data System (ADS)

Karami, Mojtaba; Rangzan, Kazem; Saberi, Azim

2013-10-01

With emergence of air-borne and space-borne hyperspectral sensors, spectroscopic measurements are gaining more importance in remote sensing. Therefore, the number of available spectral reference data is constantly increasing. This rapid increase often exhibits a poor data management, which leads to ultimate isolation of data on disk storages. Spectral data without precise description of the target, methods, environment, and sampling geometry cannot be used by other researchers. Moreover, existing spectral data (in case it accompanied with good documentation) become virtually invisible or unreachable for researchers. Providing documentation and a data-sharing framework for spectral data, in which researchers are able to search for or share spectral data and documentation, would definitely improve the data lifetime. Relational Database Management Systems (RDBMS) are main candidates for spectral data management and their efficiency is proven by many studies and applications to date. In this study, a new approach to spectral data administration is presented based on spatial identity of spectral samples. This method benefits from scalability and performance of RDBMS for storage of spectral data, but uses GIS servers to provide users with interactive maps as an interface to the system. The spectral files, photographs and descriptive data are considered as belongings of a geospatial object. A spectral processing unit is responsible for evaluation of metadata quality and performing routine spectral processing tasks for newly-added data. As a result, by using internet browser software the users would be able to visually examine availability of data and/or search for data based on descriptive attributes associated to it. The proposed system is scalable and besides giving the users good sense of what data are available in the database, it facilitates participation of spectral reference data in producing geoinformation.

The RACE (Research and Development in Advanced Technologies for Europe) Program: A 1989 Update

DTIC Science & Technology

1989-12-15

Definition TV (HDTV) Expcrimcntal Usage . A......a.d..r Dist special 1081 - Broadband User Network Interface (BUNI)..................... 4 1082 ...develop man/machine which will provide a traffic analyzer and generator. interfaces that are consistent across a wide range of ap-plications. 1082 ... 1082 are to provide usage reference models for the different types of e Define IBC quality of service rquiremnts by usage design issue. It deals with

7 CFR 1.302 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Under the Program Fraud Civil Remedies Act of 1986 § 1.302 Definitions. (a) Agency means a constituent organizational unit of the USDA. (b) Agency Fraud Claims Officer—(AFCO) means an officer or employee of an agency...) Statement means any representation, certification, affirmation, document, record, or accounting or...

Nevada Administrative Code for Special Education Programs.

ERIC Educational Resources Information Center

Nevada State Dept. of Education, Carson City. Special Education Branch.

This document presents excerpts from Chapter 388 of the Nevada Administrative Code, which concerns definitions, eligibility, and programs for students who are disabled or gifted/talented. The first section gathers together 36 relevant definitions from the Code for such concepts as "adaptive behavior,""autism,""gifted and…

30 CFR 57.6000 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

.... The following definitions apply in this subpart. Blasting agent. Any substance classified as a blasting agent by the Department of Transportation in 49 CFR 173.114a(a). This document is available at any... Metal and Nonmetal Safety and Health district office. Explosive material. Explosives, blasting agents...

30 CFR 57.6000 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... The following definitions apply in this subpart. Blasting agent. Any substance classified as a blasting agent by the Department of Transportation in 49 CFR 173.114a(a). This document is available at any... Metal and Nonmetal Safety and Health district office. Explosive material. Explosives, blasting agents...

30 CFR 57.6000 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

.... The following definitions apply in this subpart. Blasting agent. Any substance classified as a blasting agent by the Department of Transportation in 49 CFR 173.114a(a). This document is available at any... Metal and Nonmetal Safety and Health district office. Explosive material. Explosives, blasting agents...

30 CFR 57.6000 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

.... The following definitions apply in this subpart. Blasting agent. Any substance classified as a blasting agent by the Department of Transportation in 49 CFR 173.114a(a). This document is available at any... Metal and Nonmetal Safety and Health district office. Explosive material. Explosives, blasting agents...

30 CFR 57.6000 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

.... The following definitions apply in this subpart. Blasting agent. Any substance classified as a blasting agent by the Department of Transportation in 49 CFR 173.114a(a). This document is available at any... Metal and Nonmetal Safety and Health district office. Explosive material. Explosives, blasting agents...

22 CFR 50.1 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Relations DEPARTMENT OF STATE NATIONALITY AND PASSPORTS NATIONALITY PROCEDURES § 50.1 Definitions. The... owing permanent allegiance to the United States. (e) Passport means a travel document issued under the authority of the Secretary of State attesting to the identity and nationality of the bearer. (f) Passport...

22 CFR 50.1 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Relations DEPARTMENT OF STATE NATIONALITY AND PASSPORTS NATIONALITY PROCEDURES § 50.1 Definitions. The... owing permanent allegiance to the United States. (e) Passport means a travel document issued under the authority of the Secretary of State attesting to the identity and nationality of the bearer. (f) Passport...

22 CFR 50.1 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Relations DEPARTMENT OF STATE NATIONALITY AND PASSPORTS NATIONALITY PROCEDURES § 50.1 Definitions. The... owing permanent allegiance to the United States. (e) Passport means a travel document issued under the authority of the Secretary of State attesting to the identity and nationality of the bearer. (f) Passport...

22 CFR 50.1 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Relations DEPARTMENT OF STATE NATIONALITY AND PASSPORTS NATIONALITY PROCEDURES § 50.1 Definitions. The... owing permanent allegiance to the United States. (e) Passport means a travel document issued under the authority of the Secretary of State attesting to the identity and nationality of the bearer. (f) Passport...

22 CFR 50.1 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Relations DEPARTMENT OF STATE NATIONALITY AND PASSPORTS NATIONALITY PROCEDURES § 50.1 Definitions. The... owing permanent allegiance to the United States. (e) Passport means a travel document issued under the authority of the Secretary of State attesting to the identity and nationality of the bearer. (f) Passport...

40 CFR 239.2 - Scope and definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... action, and financial assurance of Subtitle D regulated facilities. Permit documents means permit...) regulated facilities under the state's jurisdiction. (b) Definitions. (1) For purposes of this part... regulated under section 4010(c) of Subtitle D of RCRA comply with the requirements of the approved state...

22 CFR 42.63 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Relations DEPARTMENT OF STATE VISAS VISAS: DOCUMENTATION OF IMMIGRANTS UNDER THE IMMIGRATION AND NATIONALITY ACT, AS AMENDED Application for Immigrant Visas § 42.63 Definitions. (a) Application forms—(1) Application on Form DS-230 or Form DS-260 required. Every alien applying for an immigrant visa must make...

22 CFR 42.63 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Relations DEPARTMENT OF STATE VISAS VISAS: DOCUMENTATION OF IMMIGRANTS UNDER THE IMMIGRATION AND NATIONALITY ACT, AS AMENDED Application for Immigrant Visas § 42.63 Definitions. (a) Application forms—(1) Application on Form DS-230 or Form DS-260 required. Every alien applying for an immigrant visa must make...

22 CFR 42.63 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Relations DEPARTMENT OF STATE VISAS VISAS: DOCUMENTATION OF IMMIGRANTS UNDER THE IMMIGRATION AND NATIONALITY ACT, AS AMENDED Application for Immigrant Visas § 42.63 Definitions. (a) Application forms—(1) Application on Form DS-230 or Form DS-260 required. Every alien applying for an immigrant visa must make...

Evaluating the Informative Quality of Documents in SGML Format from Judgements by Means of Fuzzy Linguistic Techniques Based on Computing with Words.

ERIC Educational Resources Information Center

Herrera-Viedma, Enrique; Peis, Eduardo

2003-01-01

Presents a fuzzy evaluation method of SGML documents based on computing with words. Topics include filtering the amount of information available on the Web to assist users in their search processes; document type definitions; linguistic modeling; user-system interaction; and use with XML and other markup languages. (Author/LRW)

The Forest Inventory and Analysis Database: Database description and users manual version 4.0 for Phase 2

Treesearch

Sharon W. Woudenberg; Barbara L. Conkling; Barbara M. O' Connell; Elizabeth B. LaPoint; Jeffery A. Turner; Karen L. Waddell

2010-01-01

This document is based on previous documentation of the nationally standardized Forest Inventory and Analysis database (Hansen and others 1992; Woudenberg and Farrenkopf 1995; Miles and others 2001). Documentation of the structure of the Forest Inventory and Analysis database (FIADB) for Phase 2 data, as well as codes and definitions, is provided. Examples for...

Apprentices and Trainees: December Quarter 2009: Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

This document covers the data terms used in the Apprentices and trainees December quarter 2009 report and its associated data tables. The primary purpose of this document is to assist users of the report to understand the specific data terms used within it. Terms that appear in the report are listed in alphabetical order with the following…

Apprentices and Trainees: September Quarter 2009. Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

This document covers the data terms used in the "Apprentices and trainees September" quarter 2009 report and its associated data tables. The primary purpose of this document is to assist users of the report to understand the specific data terms used within it. Terms that appear in the report are listed in alphabetical order with the following…

Apprentices and Trainees: Early Trend Estimates. June 2010: Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

This document covers the data terms used in the "Apprentices and trainees early trend estimates June 2010" publication. The primary purpose of this document is to assist users of the report to understand the specific data terms used within it. Terms that appear in the report are listed in alphabetical order with the following information…

Outcomes from the Productivity Places Program 2009: Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2009

2009-01-01

This document covers the data terms used in the "Outcomes from the Productivity Places Program 2009" report and its associated data tables. The primary purpose of this document is to assist users of the report to understand the specific data terms used within it. Terms that appear in the report are listed in alphabetical order with the…

Implementation of a scalable, web-based, automated clinical decision support risk-prediction tool for chronic kidney disease using C-CDA and application programming interfaces.

PubMed

Samal, Lipika; D'Amore, John D; Bates, David W; Wright, Adam

2017-11-01

Clinical decision support tools for risk prediction are readily available, but typically require workflow interruptions and manual data entry so are rarely used. Due to new data interoperability standards for electronic health records (EHRs), other options are available. As a clinical case study, we sought to build a scalable, web-based system that would automate calculation of kidney failure risk and display clinical decision support to users in primary care practices. We developed a single-page application, web server, database, and application programming interface to calculate and display kidney failure risk. Data were extracted from the EHR using the Consolidated Clinical Document Architecture interoperability standard for Continuity of Care Documents (CCDs). EHR users were presented with a noninterruptive alert on the patient's summary screen and a hyperlink to details and recommendations provided through a web application. Clinic schedules and CCDs were retrieved using existing application programming interfaces to the EHR, and we provided a clinical decision support hyperlink to the EHR as a service. We debugged a series of terminology and technical issues. The application was validated with data from 255 patients and subsequently deployed to 10 primary care clinics where, over the course of 1 year, 569 533 CCD documents were processed. We validated the use of interoperable documents and open-source components to develop a low-cost tool for automated clinical decision support. Since Consolidated Clinical Document Architecture-based data extraction extends to any certified EHR, this demonstrates a successful modular approach to clinical decision support. © The Author 2017. Published by Oxford University Press on behalf of the American Medical Informatics Association.

Phase C/D program development plan. Volume 1: Program plan

NASA Technical Reports Server (NTRS)

1971-01-01

The Phase C/D definition of the Modular Space Station has been developed. The modular approach selected during the option period was evaluated, requirements were defined, and program definition and preliminary design were accomplished. The Space Station Project is covered in depth, the research applications module is limited to a project-level definition, and the shuttle operations are included for interface requirements identification, scheduling, and costing. Discussed in detail are: (1) baseline program and project descriptions; (2) phase project planning; (3) modular space station program schedule; (4) program management plan; (5) operations; (6) facilities; (7) logistics; and (8) manpower.

Life sciences payload definition and integration study. Volume 1: Executive summary. [carry-on laboratory for Spacelab

NASA Technical Reports Server (NTRS)

1974-01-01

The definition and integration tasks involved in the development of design concepts for a carry-on laboratory (COL), to be compatible with Spacelab operations, were divided into the following study areas: (1) identification of research and equipment requirements of the COL; (2) development of a number of conceptual layouts for COL based on the defined research of final conceptual designs; and (4) development of COL planning information for definition of COL/Spacelab interface data, cost data, and program cost schedules, including design drawings of a selected COL to permit fabrication of a functional breadboard.

Definition of problems of persons in sheltered care environments

NASA Technical Reports Server (NTRS)

Fetzner, W. N.

1979-01-01

Innovations in health care using aerospace technologies are described. Voice synthesizer and voice recognition technologies were used in developing voice controlled wheel chairs and optacons. Telephone interface modules are also described.

Congruence Reconsidered.

ERIC Educational Resources Information Center

Tudor, Keith; Worrall, Mike

1994-01-01

Discusses Carl Rogers' definitions of congruence, and identifies four specific requirements for the concept and practice of therapeutic congruence. Examines the interface between congruence and the other necessary and sufficient conditions of change, drawing on examples from practice. (JPS)

Manufacturing. Technology Education-Mathematics and Science Interface Project.

ERIC Educational Resources Information Center

Smith, Kenneth L., Ed.

The curriculum materials contained in this document were developed through a cooperative effort by educators in the state of Maryland. It was a curriculum project aimed at the meaningful integration of mathematics and science. It is suggested that these materials be used in two significant ways. First, this document can serve as an instructional…

Construction. Technology Education-Mathematics and Science Interface Project.

ERIC Educational Resources Information Center

Maryland State Dept. of Education, Baltimore. Div. of Vocational-Technical Education.

The curriculum materials contained in this document were developed through a cooperative effort by educators in the state of Maryland. It was a curriculum project aimed at the meaningful integration of mathematics and science. It is suggested that these materials be used in two significant ways. First, this document can serve as an instructional…

Cardiopulmonary data acquisition system. Version 2.0, volume 2: Detailed software/hardware documentation

NASA Technical Reports Server (NTRS)

1980-01-01

Detailed software and hardware documentation for the Cardiopulmonary Data Acquisition System is presented. General wiring and timing diagrams are given including those for the LSI-11 computer control panel and interface cables. Flowcharts and complete listings of system programs are provided along with the format of the floppy disk file.

Transportation. Technology Education-Mathematics and Science Interface Project.

ERIC Educational Resources Information Center

Smith, Kenneth L., Ed.

The curriculum materials contained in this document were developed through a cooperative effort by educators in the state of Maryland. It was a curriculum project aimed at the meaningful integration of mathematics and science. It is suggested that these materials be used in two significant ways. First, this document can serve as an instructional…

Defining Usability Heuristics for Adoption and Efficiency of an Electronic Workflow Document Management System

ERIC Educational Resources Information Center

Fuentes, Steven

2017-01-01

Usability heuristics have been established for different uses and applications as general guidelines for user interfaces. These can affect the implementation of industry solutions and play a significant role regarding cost reduction and process efficiency. The area of electronic workflow document management (EWDM) solutions, also known as…

Thinking about Thinking.

ERIC Educational Resources Information Center

Gough, Deborah

1991-01-01

This document summarizes five studies that offer insight into the nature of higher-order thinking skills and the most effective methods for teaching them to students. The reviews outline the conclusions, definitions, recommendations, specific methods of teaching, instructional strategies, and programs detailed in the documents themselves.…

28 CFR 79.61 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

.... The term includes in situ lung cancers. (m) Readily available documentation means documents in the... injury means structural or functional damage to the kidney tubules that results in renal disease and... resulting in chronic renal dysfunction. (j) Nonmalignant respiratory disease means fibrosis of the lung...

The LSST: A System of Systems

NASA Astrophysics Data System (ADS)

Claver, Chuck F.; Debois-Felsmann, G. P.; Delgado, F.; Hascall, P.; Marshall, S.; Nordby, M.; Schumacher, G.; Sebag, J.; LSST Collaboration

2011-01-01

The Large Synoptic Survey Telescope (LSST) is a complete observing system that acquires and archives images, processes and analyzes them, and publishes reduced images and catalogs of sources and objects. The LSST will operate over a ten year period producing a survey of 20,000 square degrees over the entire [Southern] sky in 6 filters (ugrizy) with each field having been visited several hundred times enabling a wide spectrum of science from fast transients to exploration of dark matter and dark energy. The LSST itself is a complex system of systems consisting of the 8.4m 3-mirror telescope, a 3.2 billion pixel camera, and a peta-scale data management system. The LSST project uses a Model Based Systems Engineering (MBSE) methodology to ensure an integrated approach to system design and rigorous definition of system interfaces and specifications. The MBSE methodology is applied through modeling of the LSST's systems with the System Modeling Language (SysML). The SysML modeling recursively establishes the threefold relationship between requirements, logical & physical functional decomposition and definition, and system and component behavior at successively deeper level of abstraction and detail. The LSST modeling includes the analysis and documenting the flow of command and control information and data between the suite of systems in the LSST observatory that are needed to carry out the activities of the survey. The MBSE approach is applied throughout all stages of the project from design, to validation and verification, though to commissioning.

Ontology for Life-Cycle Modeling of Electrical Distribution Systems: Application of Model View Definition Attributes

DTIC Science & Technology

2013-06-01

Building in- formation exchange (COBie), Building Information Modeling ( BIM ) 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF...to develop a life-cycle building model have resulted in the definition of a “core” building information model that contains general information de...develop an information -exchange Model View Definition (MVD) for building electrical systems. The objective of the current work was to document the

A Graphical User-Interface for Propulsion System Analysis

NASA Technical Reports Server (NTRS)

Curlett, Brian P.; Ryall, Kathleen

1992-01-01

NASA LeRC uses a series of computer codes to calculate installed propulsion system performance and weight. The need to evaluate more advanced engine concepts with a greater degree of accuracy has resulted in an increase in complexity of this analysis system. Therefore, a graphical user interface was developed to allow the analyst to more quickly and easily apply these codes. The development of this interface and the rationale for the approach taken are described. The interface consists of a method of pictorially representing and editing the propulsion system configuration, forms for entering numerical data, on-line help and documentation, post processing of data, and a menu system to control execution.

A graphical user-interface for propulsion system analysis

NASA Technical Reports Server (NTRS)

Curlett, Brian P.; Ryall, Kathleen

1993-01-01

NASA LeRC uses a series of computer codes to calculate installed propulsion system performance and weight. The need to evaluate more advanced engine concepts with a greater degree of accuracy has resulted in an increase in complexity of this analysis system. Therefore, a graphical user interface was developed to allow the analyst to more quickly and easily apply these codes. The development of this interface and the rationale for the approach taken are described. The interface consists of a method of pictorially representing and editing the propulsion system configuration, forms for entering numerical data, on-line help and documentation, post processing of data, and a menu system to control execution.

An implementation and evaluation of the MPI 3.0 one-sided communication interface

DOE PAGES

Dinan, James S.; Balaji, Pavan; Buntinas, Darius T.; ...

2016-01-09

The Q1 Message Passing Interface (MPI) 3.0 standard includes a significant revision to MPI’s remote memory access (RMA) interface, which provides support for one-sided communication. MPI-3 RMA is expected to greatly enhance the usability and performance ofMPI RMA.We present the first complete implementation of MPI-3 RMA and document implementation techniques and performance optimization opportunities enabled by the new interface. Our implementation targets messaging-based networks and is publicly available in the latest release of the MPICH MPI implementation. Here using this implementation, we explore the performance impact of new MPI-3 functionality and semantics. Results indicate that the MPI-3 RMA interface providesmore » significant advantages over the MPI-2 interface by enabling increased communication concurrency through relaxed semantics in the interface and additional routines that provide new window types, synchronization modes, and atomic operations.« less

An implementation and evaluation of the MPI 3.0 one-sided communication interface

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dinan, James S.; Balaji, Pavan; Buntinas, Darius T.

The Q1 Message Passing Interface (MPI) 3.0 standard includes a significant revision to MPI’s remote memory access (RMA) interface, which provides support for one-sided communication. MPI-3 RMA is expected to greatly enhance the usability and performance ofMPI RMA.We present the first complete implementation of MPI-3 RMA and document implementation techniques and performance optimization opportunities enabled by the new interface. Our implementation targets messaging-based networks and is publicly available in the latest release of the MPICH MPI implementation. Here using this implementation, we explore the performance impact of new MPI-3 functionality and semantics. Results indicate that the MPI-3 RMA interface providesmore » significant advantages over the MPI-2 interface by enabling increased communication concurrency through relaxed semantics in the interface and additional routines that provide new window types, synchronization modes, and atomic operations.« less

Monographs in Environmental Education and Environmental Studies. Volume I.

ERIC Educational Resources Information Center

Sacks, Arthur B., Ed.

The first section of this document contains definitional papers prepared by three sections of the North American Association for Environmental Education (NAEE). They are: (1) "The Challenges of K-12 Environmental Education" (Harold Hungerford and Trudi Volk); (2) "'Environmental Studies': Towards a Definition" (Royal Harde);…

78 FR 5330 - Proposed Priorities and Definitions-NIDRR DRRP-Community Living and Participation, Health and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-25

... observational findings, and creating other sources of research-based information. This research stage may... definitions for the Disability and Rehabilitation Research Projects and Centers Program administered by the National Institute on Disability and Rehabilitation Research (NIDRR). Specifically, this document proposes...

30 CFR 250.1402 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Definitions. Terms used in this subpart have the following meaning: Case file means an MMS document file... fine. It is an MMS regulatory enforcement tool used in addition to Notices of Incidents of... employee assigned to review case files and assess civil penalties. Violation means failure to comply with...

40 CFR 350.1 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... INFORMATION: AND TRADE SECRET DISCLOSURES TO HEALTH PROFESSIONALS Trade Secrecy Claims § 350.1 Definitions... secret. Sanitized means a version of a document from which information claimed as trade secret or... support of a claim that chemical identity is a trade secret. Title III means Title III of the Superfund...

40 CFR 350.1 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... INFORMATION: AND TRADE SECRET DISCLOSURES TO HEALTH PROFESSIONALS Trade Secrecy Claims § 350.1 Definitions... secret. Sanitized means a version of a document from which information claimed as trade secret or... support of a claim that chemical identity is a trade secret. Title III means Title III of the Superfund...

40 CFR 350.1 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... INFORMATION: AND TRADE SECRET DISCLOSURES TO HEALTH PROFESSIONALS Trade Secrecy Claims § 350.1 Definitions... secret. Sanitized means a version of a document from which information claimed as trade secret or... support of a claim that chemical identity is a trade secret. Title III means Title III of the Superfund...

40 CFR 350.1 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... INFORMATION: AND TRADE SECRET DISCLOSURES TO HEALTH PROFESSIONALS Trade Secrecy Claims § 350.1 Definitions... secret. Sanitized means a version of a document from which information claimed as trade secret or... support of a claim that chemical identity is a trade secret. Title III means Title III of the Superfund...

22 CFR 42.63 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Relations DEPARTMENT OF STATE VISAS VISAS: DOCUMENTATION OF IMMIGRANTS UNDER THE IMMIGRATION AND NATIONALITY ACT, AS AMENDED Application for Immigrant Visas § 42.63 Definitions. (a) Application forms—(1) Application on Form DS-230 or Form DS-260 Required.—Every alien applying for an immigrant visa must make...

19 CFR 111.1 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

.... “Broker” means a customs broker. Corporate compliance activity. “Corporate compliance activity” means activity performed by a business entity to ensure that documents for a related business entity or entities... definition, a “business entity” is an entity that is registered or otherwise on record with an appropriate...

Informed Consent: Does Anyone Really Understand What Is Contained In The Medical Record?

PubMed

Fenton, S H; Manion, F; Hsieh, K; Harris, M

2015-01-01

Despite efforts to provide standard definitions of terms such as "medical record", "computer-based patient record", "electronic medical record" and "electronic health record", the terms are still used interchangeably. Initiatives like data and information governance, research biorepositories, and learning health systems require availability and reuse of data, as well as common understandings of the scope for specific purposes. Lacking widely shared definitions, utilization of the afore-mentioned terms in research informed consent documents calls to question whether all participants in the research process - patients, information technology and regulatory staff, and the investigative team - fully understand what data and information they are asking to obtain and agreeing to share. This descriptive study explored the terminology used in research informed consent documents when describing patient data and information, asking the question "Does the use of the term "medical record" in the context of a research informed consent document accurately represent the scope of the data involved?" Informed consent document templates found on 17 Institutional Review Board (IRB) websites with Clinical and Translational Science Awards (CTSA) were searched for terms that appeared to be describing the data resources to be accessed. The National Library of Medicine's (NLM) Terminology Services was searched for definitions provided by key standards groups that deposit terminologies with the NLM. The results suggest research consent documents are using outdated terms to describe patient information, health care terminology systems need to consider the context of research for use cases, and that there is significant work to be done to assure the HIPAA Omnibus Rule is applied to contemporary activities such as biorepositories and learning health systems. "Medical record", a term used extensively in research informed consent documents, is ambiguous and does not serve us well in the context of contemporary information management and governance.

Definitions and methods of measuring and reporting on injurious falls in randomised controlled fall prevention trials: a systematic review

PubMed Central

2012-01-01

Background The standardisation of the assessment methodology and case definition represents a major precondition for the comparison of study results and the conduction of meta-analyses. International guidelines provide recommendations for the standardisation of falls methodology; however, injurious falls have not been targeted. The aim of the present article was to review systematically the range of case definitions and methods used to measure and report on injurious falls in randomised controlled trials (RCTs) on fall prevention. Methods An electronic literature search of selected comprehensive databases was performed to identify injurious falls definitions in published trials. Inclusion criteria were: RCTs on falls prevention published in English, study population ≥ 65 years, definition of injurious falls as a study endpoint by using the terms "injuries" and "falls". Results The search yielded 2089 articles, 2048 were excluded according to defined inclusion criteria. Forty-one articles were included. The systematic analysis of the methodology applied in RCTs disclosed substantial variations in the definition and methods used to measure and document injurious falls. The limited standardisation hampered comparability of study results. Our results also highlight that studies which used a similar, standardised definition of injurious falls showed comparable outcomes. Conclusions No standard for defining, measuring, and documenting injurious falls could be identified among published RCTs. A standardised injurious falls definition enhances the comparability of study results as demonstrated by a subgroup of RCTs used a similar definition. Recommendations for standardising the methodology are given in the present review. PMID:22510239

Specification and Design of Electrical Flight System Architectures with SysML

NASA Technical Reports Server (NTRS)

McKelvin, Mark L., Jr.; Jimenez, Alejandro

2012-01-01

Modern space flight systems are required to perform more complex functions than previous generations to support space missions. This demand is driving the trend to deploy more electronics to realize system functionality. The traditional approach for the specification, design, and deployment of electrical system architectures in space flight systems includes the use of informal definitions and descriptions that are often embedded within loosely coupled but highly interdependent design documents. Traditional methods become inefficient to cope with increasing system complexity, evolving requirements, and the ability to meet project budget and time constraints. Thus, there is a need for more rigorous methods to capture the relevant information about the electrical system architecture as the design evolves. In this work, we propose a model-centric approach to support the specification and design of electrical flight system architectures using the System Modeling Language (SysML). In our approach, we develop a domain specific language for specifying electrical system architectures, and we propose a design flow for the specification and design of electrical interfaces. Our approach is applied to a practical flight system.

Space Station Freedom biomedical monitoring and countermeasures: Biomedical facility hardware catalog

NASA Technical Reports Server (NTRS)

1990-01-01

This hardware catalog covers that hardware proposed under the Biomedical Monitoring and Countermeasures Development Program supported by the Johnson Space Center. The hardware items are listed separately by item, and are in alphabetical order. Each hardware item specification consists of four pages. The first page describes background information with an illustration, definition and a history/design status. The second page identifies the general specifications, performance, rack interface requirements, problems, issues, concerns, physical description, and functional description. The level of hardware design reliability is also identified under the maintainability and reliability category. The third page specifies the mechanical design guidelines and assumptions. Described are the material types and weights, modules, and construction methods. Also described is an estimation of percentage of construction which utilizes a particular method, and the percentage of required new mechanical design is documented. The fourth page analyzes the electronics, the scope of design effort, and the software requirements. Electronics are described by percentages of component types and new design. The design effort, as well as, the software requirements are identified and categorized.

Preparing for LISA Data: The Testbed for LISA Analysis Project

NASA Astrophysics Data System (ADS)

Finn, Lee Samuel; Benacquista, Matthew J.; Larson, Shane L.; Rubbo, Louis J.

2006-11-01

The Testbed for LISA Analysis (TLA) Project aims to facilitate the development, validation, and comparison of different methods for LISA science data analysis by the broad LISA Science Community to meet the special challenges that LISA poses. It includes a well-defined Simulated LISA Data Product (SLDP), which provides a clean interface between the modeling of LISA, the preparation of LISA data, and the analysis of the LISA science data stream; a web-based clearinghouse (at ) providing SLDP software libraries, relevant software, papers and other documentation, and a repository for SLDP data sets; a set of mailing lists for communication between and among LISA simulator developers and LISA science analysts; a problem tracking system for SLDP support; and a program of workshops to allow the burgeoning LISA science community to further refine the SLDP definition, define specific LISA science analysis challenges, and report their results. This proceedings paper describes the TLA Project, the resources it provides immediately, its future plans, and invites the participation of the broader community in the furtherance of its goals.

Supervisory Control System Architecture for Advanced Small Modular Reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cetiner, Sacit M; Cole, Daniel L; Fugate, David L

2013-08-01

This technical report was generated as a product of the Supervisory Control for Multi-Modular SMR Plants project within the Instrumentation, Control and Human-Machine Interface technology area under the Advanced Small Modular Reactor (SMR) Research and Development Program of the U.S. Department of Energy. The report documents the definition of strategies, functional elements, and the structural architecture of a supervisory control system for multi-modular advanced SMR (AdvSMR) plants. This research activity advances the state-of-the art by incorporating decision making into the supervisory control system architectural layers through the introduction of a tiered-plant system approach. The report provides a brief history ofmore » hierarchical functional architectures and the current state-of-the-art, describes a reference AdvSMR to show the dependencies between systems, presents a hierarchical structure for supervisory control, indicates the importance of understanding trip setpoints, applies a new theoretic approach for comparing architectures, identifies cyber security controls that should be addressed early in system design, and describes ongoing work to develop system requirements and hardware/software configurations.« less