Associations between problematic Internet use and psychiatric symptoms among university students in Japan.

PubMed

Kitazawa, Momoko; Yoshimura, Michitaka; Murata, Mayu; Sato-Fujimoto, Yuka; Hitokoto, Hidefumi; Mimura, Masaru; Tsubota, Kazuo; Kishimoto, Taishiro

2018-04-13

Research on the adverse effects of Internet use has gained importance recently. However, there is currently insufficient data on Japanese young adults' Internet use, so we conducted a survey targeting Japanese university students to research problematic Internet use (PIU). We also investigated the relationship between PIU and multiple psychiatric symptoms. A paper-based survey was conducted at five universities in Japan. Respondents were asked to fill out self-report scales regarding their Internet dependency using the Internet Addiction Test (IAT). Sleep quality, attention-deficit hyperactivity disorder (ADHD) tendency, depression, and anxiety symptom data were also collected based on respective self-reports. There were 1336 responses and 1258 were included in the analysis. The mean IAT score (± SD) was 37.87 ± 12.59; and 38.2% of participants were classified as PIU, and 61.8% as non-PIU. The trend level for young women showed that they were more likely to be classified as PIU than young men (40.6% and 35.2% respectively, P = 0.05). Compared to the non-PIU group, the PIU group used the Internet longer (P < 0.001), had significantly lower sleep quality (P < 0.001), had stronger ADHD tendencies (P < 0.001), had higher Depression scores (P < 0.001), and had higher Trait-Anxiety scores (P < 0.001). Based on multiple logistic regression analyses, the factors that contributed to an increased risk of PIU were: being female (odds ratio [OR] = 1.52), being older (OR = 1.17), having poor sleep quality (OR = 1.52), having ADHD tendencies (OR = 2.70), having depression (OR = 2.24), and having anxiety tendencies (OR = 1.43). We found a high PIU prevalence among Japanese young adults. The factors that predicted PIU were: female sex, older age, poor sleep quality, ADHD tendencies, depression, and anxiety. © 2018 The Author. Psychiatry and Clinical Neurosciences © 2018 Japanese Society of Psychiatry and Neurology.

Stress moderates the relationship between problematic Internet use by parents and problematic Internet use by adolescents.

PubMed

Lam, Lawrence T; Wong, Emmy M Y

2015-03-01

Based on the theoretical framework of Problem Behavior and Stress Reduction theories for problematic Internet use (PIU), this study aimed to investigate the relationship between parental PIU and the PIU among adolescents taking into consideration the stress levels of young people. This was a population-based parent and adolescent dyad health survey utilizing a random sampling technique. PIU for both parents and adolescents was measured by the Internet addiction test designed by Young. The stress level of adolescents was assessed using the stress subscale of the Depression Anxiety Stress Scale (DASS). Data were analyzed using logistic regression modeling techniques with adjustment for potential confounding factors with analysis on the modification effect of stress levels on the relationship between parent and adolescent PIU. Of the total 1,098 parent and adolescent dyads with usable information, 263 adolescents (24.0%) and 62 parents (5.7%) could be classified as moderate and severe problematic users of the Internet. About 14% (n = 157) of adolescents could be classified with moderate-to-severe stress. Regression analysis results suggested a significant interaction between parental PIU and adolescents' stress levels on adolescent PIU. Stratified regression analyses by stress level resulted in a significant parent and adolescent PIU relationship in the low stress group (odds ratio, 3.18; 95% confidence interval 1.65-6.14). However, the association between parent and adolescent PIU in the high stress group became insignificant. There was a significant parent and adolescent PIU relationship; however, this relationship is differentially affected by the stress status of the adolescent. The direct implication of the results is that parental Internet use should also be assessed and included as part of the treatment regime for adolescents. Copyright © 2015 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Problematic Internet use, maladaptive future time perspective and school context.

PubMed

Díaz-Aguado, María J; Martín-Babarro, Javier; Falcón, Laia

2018-05-01

Spain is among the European countries with the highest prevalence of adolescents at risk of Internet addiction, a problem that could be linked to youth unemployment and leaving education early. This research evaluated the role of three variables relative to school context on Problematic Internet Use (PIU) and on the relationship between PIU and Maladaptive Future Time Perspective (MFTP, defined as an excessive focus on the present and a fatalistic attitude towards the future, a variable that had not previously been studied in terms of its relationship to adolescents' PIU). The study was carried out with 1288 adolescents, aged 12 to 16 years old, enrolled at 31 secondary schools in Madrid, Spain. As expected, we found that MFTP and hostile treatment by teachers were associated with an increase in PIU, whereas school appreciation was associated with a decrease in PIU. In addition, hostile treatment by teachers had a moderate effect on the MFTP-PIU relationship. In order to prevent PIU it is important to foster confidence in adolescents in their own potential to build the future from the present through positive interaction with teachers, stimulating an appreciation of school within these digital natives' peer group culture.

Association between problematic Internet use and impulse control disorders among Iranian university students.

PubMed

Mazhari, Shahrzad

2012-05-01

Previous studies have examined the relationship between problematic Internet use (PIU) with pathological gambling and impulsivity. However, few studies have investigated the association between PIU and other impulse control disorders. This study aimed to assess whether PIU is related to compulsive buying, kleptomania, trichotillomania, intermittent explosive disorder, and pyromania, among a sample of Iranian university students. A cross-sectional study design was used among a random sample of (n=950) university students. Self-reported questionnaires, including demographic, Problematic Internet Use Questionnaire (PIUQ) and Minnesota Impulse Disorders Interview were utilized. The prevalence of PIU was 21.2 percent. Students with diagnosis of either compulsive buying, or intermittent explosive disorder, or pyromania had significantly higher scores on PIUQ compared to the students without the diagnosis. Multivariate regression analyses indicated that in the male gender, the diagnosis of either compulsive buying or intermittent explosive disorder were significant predictors of the risk of the PIU. The results support the proposal that PIU should be considered as a spectrum of impulse control disorder.

Determinants of Problematic Internet use and its Association with Disordered Eating Attitudes among Minia University Students.

PubMed

Kamal, Nashwa Nabil; Kamal, Nashaat Nabil

2018-01-01

To determine the association between problematic Internet use (PIU) and disordered eating attitudes (DEAs) and to detect the potential risk factors for PIU among University students in Minia, Egypt. A cross-sectional study was carried out among a random sample ( n = 2365) of Minia University students. PIU was assessed using The Problematic Internet Use Scale (PIUS), and the DEAs were assessed using eating attitudes test-26 questionnaire. Of the 2365 students, 424 (17.9%) had DEAs, and it was more in females than males (22.3% and 14.5%, respectively). The mean of the PIUS score also was significantly higher in males than females (120.3 ± 30.5, and 117.5 ± 30.6, respectively). A positive moderate correlation ( r = 0.48, P < 0.05) was detected between PIU and DEAs. The results of this study indicate that PIU is significantly correlated with DEAs among University students in Minia, Egypt, and further studies are needed to identify the association between DEAs and PIU.

Life satisfaction and problematic Internet use: Evidence for gender specific effects.

PubMed

Lachmann, Bernd; Sariyska, Rayna; Kannen, Christopher; Cooper, Andrew; Montag, Christian

2016-04-30

The present study investigates, using a large sample (N=4852 participants; 51.71% males), how problematic Internet use (PIU) relates to general life satisfaction and distinct facets of everyday life such as job, leisure, and health. Data on Internet usage was gathered using a short form of the Young Internet Addiction Test. Life satisfaction was measured with standardized items taken from the socioeconomic panel (Germany). Highly significant associations were observed between PIU and the facets of life satisfaction, health and leisure. Of note, these associations between the mentioned facets of life satisfaction and PIU were significantly higher for females compared to males, although the reported total level of PIU was significantly lower for females. This suggests the presence of different thresholds for males and females with respect to negative effects on well-being due to PIU. The current study underlines the importance of including gender as a critical variable when investigating the association between life satisfaction and PIU. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Problematic Internet Use in High School Students in Guangdong Province, China

PubMed Central

Lu, Ciyong; Wu, Jie; Deng, Xueqing; Hong, Lingyao

2011-01-01

Background Problematic Internet Use (PIU) is a growing problem in Chinese adolescents. There are many risk factors for PIU, which are found at school and at home. This study was designed to investigate the prevalence of PIU and to investigate the potential risk factors for PIU among high school students in China. Methodology/Principal Findings A cross-sectional study was conducted. A total of 14,296 high school students were surveyed in four cities in Guangdong province. Problematic Internet Use was assessed by the 20-item Young Internet Addiction Test (YIAT). Information was also collected on demographics, family and school-related factors and Internet usage patterns. Of the 14,296 students, 12,446 were Internet users. Of those, 12.2% (1,515) were identified as problematic Internet users (PIUs). Generalized mixed-model regression revealed that there was no gender difference between PIUs and non-PIUs. High study-related stress, having social friends, poor relations with teachers and students and conflictive family relationships were risk factors for PIU. Students who spent more time on-line were more likely to develop PIU. The habits of and purposes for Internet usage were diverse, influencing the susceptibility to PIU. Conclusions/Significance PIU is common among high school students, and risk factors are found at home and at school. Teachers and parents should pay close attention to these risk factors. Effective measures are needed to prevent the spread of this problem. PMID:21573073

The relationships between problematic internet use, alexithymia levels and attachment characteristics in a sample of adolescents in a high school, Turkey.

PubMed

Bolat, Nurullah; Yavuz, Mesut; Eliaçık, Kayı; Zorlu, Adil

2018-06-01

The aim of this study is to investigate the relationships between attachment characteristics, alexithymia and problematic internet use (PIU) in adolescents. The study was performed on 444 high school students (66% female and 34% male). Internet Addiction Test (IAT), Toronto Alexithymia Scale (TAS-20) and Short Form of the Inventory of Parent and Peer Attachment (s-IPPA) scales were used. The adolescents who scored ≥50 on IAT were considered as the PIU group and <50 were considered as control group. There was a moderate positive relationship between TAS-20 and IAT scores (r = .441), and a moderate negative relationship between TAS-20 and s-IPPA scores (r = -.392), and a negative weak relationship between IAT and s-IPPA scores (r = -.208). S-IPPA scores were significantly lower in the PIU group compared to the controls (p < .001). TAS-20 scores of the PIU group were significantly higher compared to the controls (p < .05). Logistic regression analysis indicated that s-IPPA scores and TAS-20 significantly predict the PIU development (p < .05). The results indicate that alexithymia increases the risk of PIU and higher attachment quality is a protective factor for both alexithymia and PIU. These results suggest that it is important to focus on the insecure attachment patterns and alexithymic characteristics when studying adolescents with PIU.

The C(2)1pi(u) state of Na2 molecule studied by polarization labelling spectroscopy method.

PubMed

Jastrzebski, W; Kowalczyk, P; Camacho, J J; Pardo, A; Poyato, J M

2001-08-01

The C1pi(u) <-- X1sigma(g)+ system of Na2 is studied by the polarization labelling spectroscopy technique. Accurate molecular constants are derived for the observed levels nu = 0-12, J = 12-100 in the C1pi(u) state.

Internet addiction, problematic internet use, nonproblematic internet use among Chinese adolescents: Individual, parental, peer, and sociodemographic correlates.

PubMed

Zhou, Nan; Cao, Hongjian; Li, Xiaomin; Zhang, Jintao; Yao, Yuanwei; Geng, Xiaomin; Lin, Xiuyun; Hou, Shumeng; Liu, Fenge; Chen, Xiaoli; Fang, Xiaoyi

2018-05-01

Internet addiction has been typically conceptualized as either a continuous construct or a dichotomous construct. Limited research has differentiated adolescents with problematic Internet use (PIU) from the Internet addiction group (IA) and/or nonproblematic Internet use group (NPIU) and examined the potential correlates. To fill this gap, based on data obtained from 956 Chinese adolescents (11-19 years, 47% male), this study examined if adolescents with PIU is a distinctive group from the IA and NPIU. This study also examined factors from different ecological levels that may differentiate among the three groups, including individual, parental, peer, and sociodemographic factors. Results indicated that IA, PIU, and NPIU differed significantly on scores of Young's Diagnostic Questionnaire (YDQ). Critical factors emerging from different ecological levels could differentiate between PIU and NPIU and between IA and NPIU. Such findings suggest that PIU may represent a distinct, intermediate group of Internet users. The potential theoretical and practical implications of identifying PIU were also discussed. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Blunted feedback processing during risk-taking in adolescents with features of problematic Internet use.

PubMed

Yau, Yvonne H C; Potenza, Marc N; Mayes, Linda C; Crowley, Michael J

2015-06-01

While the conceptualization of problematic Internet use (PIU) as a "behavioral addiction" resembling substance-use disorders is debated, the neurobiological underpinnings of PIU remain understudied. This study examined whether adolescents displaying features of PIU (at-risk PIU; ARPIU) are more impulsive and exhibit blunted responding in the neural mechanisms underlying feedback processing and outcome evaluation during risk-taking. Event-related potentials (ERPs) elicited by positive (i.e. reward) and negative (i.e. loss) feedback were recorded during performance on a modified version of the Balloon Analogue Risk Task (BART) among ARPIU (n=39) and non-ARPIU subjects (n=27). Compared to non-ARPIU, ARPIU adolescents displayed higher levels of urgency and lack of perseverance on the UPPS Impulsive Behavior Scale. Although no between-group difference in BART performance was observed, ERPs demonstrated overall decreased sensitivity to feedback in ARPIU compared to non-ARPIU adolescents, as indexed by blunted feedback-related negativity (FRN) and P300 amplitudes to both negative and positive feedback. The present study provides evidence for feedback processing during risk-taking as a neural correlate of ARPIU. Given recent concerns regarding the growing prevalence of PIU as a health concern, future work should examine the extent to which feedback processing may represent a risk factor for PIU, a consequence of PIU, or possibly both. Copyright © 2015 Elsevier Ltd. All rights reserved.

Pathological Internet Use and Risk-Behaviors among European Adolescents

PubMed Central

Durkee, Tony; Carli, Vladimir; Floderus, Birgitta; Wasserman, Camilla; Sarchiapone, Marco; Apter, Alan; Balazs, Judit A.; Bobes, Julio; Brunner, Romuald; Corcoran, Paul; Cosman, Doina; Haring, Christian; Hoven, Christina W.; Kaess, Michael; Kahn, Jean-Pierre; Nemes, Bogdan; Postuvan, Vita; Saiz, Pilar A.; Värnik, Peeter; Wasserman, Danuta

2016-01-01

Risk-behaviors are a major contributor to the leading causes of morbidity among adolescents and young people; however, their association with pathological Internet use (PIU) is relatively unexplored, particularly within the European context. The main objective of this study is to investigate the association between risk-behaviors and PIU in European adolescents. This cross-sectional study was conducted within the framework of the FP7 European Union project: Saving and Empowering Young Lives in Europe (SEYLE). Data on adolescents were collected from randomized schools within study sites across eleven European countries. PIU was measured using Young’s Diagnostic Questionnaire (YDQ). Risk-behaviors were assessed using questions procured from the Global School-Based Student Health Survey (GSHS). A total of 11,931 adolescents were included in the analyses: 43.4% male and 56.6% female (M/F: 5179/6752), with a mean age of 14.89 ± 0.87 years. Adolescents reporting poor sleeping habits and risk-taking actions showed the strongest associations with PIU, followed by tobacco use, poor nutrition and physical inactivity. Among adolescents in the PIU group, 89.9% were characterized as having multiple risk-behaviors. The significant association observed between PIU and risk-behaviors, combined with a high rate of co-occurrence, underlines the importance of considering PIU when screening, treating or preventing high-risk behaviors among adolescents. PMID:27005644

TonB-Dependent Receptor Repertoire of Pseudomonas aeruginosa for Uptake of Siderophore-Drug Conjugates.

PubMed

Luscher, Alexandre; Moynié, Lucile; Auguste, Pamela Saint; Bumann, Dirk; Mazza, Lena; Pletzer, Daniel; Naismith, James H; Köhler, Thilo

2018-06-01

The conjugation of siderophores to antimicrobial molecules is an attractive strategy to overcome the low outer membrane permeability of Gram-negative bacteria. In this Trojan horse approach, the transport of drug conjugates is redirected via TonB-dependent receptors (TBDR), which are involved in the uptake of essential nutrients, including iron. Previous reports have demonstrated the involvement of the TBDRs PiuA and PirA from Pseudomonas aeruginosa and their orthologues in Acinetobacter baumannii in the uptake of siderophore-beta-lactam drug conjugates. By in silico screening, we further identified a PiuA orthologue, termed PiuD, present in clinical isolates, including strain LESB58. The piuD gene in LESB58 is located at the same genetic locus as piuA in strain PAO1. PiuD has a similar crystal structure as PiuA and is involved in the transport of the siderophore-drug conjugates BAL30072, MC-1, and cefiderocol in strain LESB58. To screen for additional siderophore-drug uptake systems, we overexpressed 28 of the 34 TBDRs of strain PAO1 and identified PfuA, OptE, OptJ, and the pyochelin receptor FptA as novel TBDRs conferring increased susceptibility to siderophore-drug conjugates. The existence of a TBDR repertoire in P. aeruginosa able to transport siderophore-drug molecules potentially decreases the likelihood of resistance emergence during therapy. Copyright © 2018 Luscher et al.

Problematic Internet use and problematic alcohol use from the cognitive-behavioral model: a longitudinal study among adolescents.

PubMed

Gámez-Guadix, Manuel; Calvete, Esther; Orue, Izaskun; Las Hayas, Carlota

2015-01-01

Problematic Internet use (PIU) and problematic alcohol use are two pervasive problems during adolescence that share similar characteristics and predictors. The first objective of this study was to analyze the temporal and reciprocal relationships among the main components of PIU from the cognitive-behavioral model (preference for online social interaction, mood regulation through the Internet, deficient self-regulation, and negative consequences). The second objective was to examine the temporal and reciprocal relationships between PIU components and problematic alcohol use. We also examined whether these relationships differ between males and females. The sample comprised 801 Spanish adolescents (mean age=14.92, SD=1.01) who completed the measures both at Time 1 (T1) and Time 2 (T2) six months apart. We used structural equation modeling to analyze the relationship among the variables. Results showed that deficient self-regulation at T1 predicted an increase in preference for online interactions, mood regulation, and negative consequences of the Internet at T2. In turn, the emergence of negative consequences of PIU at T1 predicted a rise in problematic alcohol use at T2. Longitudinal relationships between different components of PIU and between the components of PIU and problematic alcohol use were invariant across genders. Deficient self-regulation, consisting of diminished self-control over cognition and behaviors related to the Internet, plays a central role in the maintenance of PIU, increasing the preference for online interactions, mood regulation, and negative consequences from Internet use over time. In turn, adolescents who present negative consequences of PIU are vulnerable targets for problematic alcohol use. Copyright © 2014 Elsevier Ltd. All rights reserved.

Clinical features and axis I comorbidity of Australian adolescent pathological Internet and video game users.

PubMed

King, Daniel L; Delfabbro, Paul H; Zwaans, Tara; Kaptsis, Dean

2013-11-01

Although there is growing international recognition of pathological technology use (PTU) in adolescence, there has been a paucity of empirical research conducted in Australia. This study was designed to assess the clinical features of pathological video gaming (PVG) and pathological Internet use (PIU) in a normative Australian adolescent population. A secondary objective was to investigate the axis I comorbidities associated with PIU and video gaming. A total of 1287 South Australian secondary school students aged 12-18 years were recruited. Participants were assessed using the PTU checklist, Revised Children's Anxiety and Depression Scale, Social Anxiety Scale for Adolescents, revised UCLA Loneliness Scale, and Teenage Inventory of Social Skills. Adolescents who met the criteria for PVG or PIU or both were compared to normal adolescents in terms of axis I comorbidity. The prevalence rates of PIU and PVG were 6.4% and 1.8%, respectively. A subgroup with co-occurring PIU and PVG was identified (3.3%). The most distinguishing clinical features of PTU were withdrawal, tolerance, lies and secrecy, and conflict. Symptoms of preoccupation, inability to self-limit, and using technology as an escape were commonly reported by adolescents without PTU, and therefore may be less useful as clinical indicators. Depression, panic disorder, and separation anxiety were most prevalent among adolescents with PIU. PTU among Australian adolescents remains an issue warranting clinical concern. These results suggest an emerging trend towards the greater uptake and use of the Internet among female adolescents, with associated PIU. Although there exists an overlap of PTU disorders, adolescents with PIU appear to be at greater risk of axis I comorbidity than adolescents with PVG alone. Further research with an emphasis on validation techniques, such as verified identification of harm, may enable an informed consensus on the definition and diagnosis of PTU.

Predicting problematic Internet use in men and women: the contributions of psychological distress, coping style, and body esteem.

PubMed

Hetzel-Riggin, Melanie D; Pritchard, Jacob R

2011-09-01

Problematic Internet use (PIU) is becoming a prevalent and serious problem among college students. Rates of PIU are higher in men, which may be due to psychological variables, such as comorbid psychological disorders and beliefs about one's body. We examined the ability of psychological distress, coping style, and body esteem to predict levels of PIU in men and women in a sample of 425 undergraduate students (46.8 percent male; mean age = 19.0, SD = 1.7). For men, phobic anxiety, wishful thinking, and overweight preoccupation were significant predictors of increased PIU. For women, depression, keeping to oneself, and decreased tension reduction were associated with increased PIU. The findings suggest that men and women may have different psychological reasons for excessive Internet use, including different types of psychological distress and coping styles. Unlike women, men may use the Internet because of weight concerns.

Altered cardiorespiratory coupling in young male adults with excessive online gaming.

PubMed

Chang, Jae Seung; Kim, Eun Young; Jung, Dooyoung; Jeong, Seong Hoon; Kim, Yeni; Roh, Myoung-Sun; Ahn, Yong Min; Hahm, Bong-Jin

2015-09-01

This study aimed to investigate changes in heart rate variability and cardiorespiratory coupling in male college students with problematic Internet use (PIU) excessive gaming type during action video game play to assess the relationship between PIU tendency and central autonomic regulation. Electrocardiograms and respiration were simultaneously recorded from 22 male participants with excessive online gaming and 22 controls during action video game play. Sample entropy (SampEn) was computed to assess autonomic regularity, and cross-SampEn was calculated to quantify autonomic coordination. During video game play, reduced cardiorespiratory coupling (CRC) was observed in individuals with PIU excessive gaming type compared with controls, implicating central autonomic dysregulation. The PIU tendency was associated with the severity of autonomic dysregulation. These findings indicate impaired CRC in PIU excessive gaming type, which may reflect alterations of central inhibitory control over autonomic responses to pleasurable online stimuli. Copyright © 2015 Elsevier B.V. All rights reserved.

School connectedness and problematic internet use in adolescents: a moderated mediation model of deviant peer affiliation and self-control.

PubMed

Li, Dongping; Li, Xian; Wang, Yanhui; Zhao, Liyan; Bao, Zhenzhou; Wen, Fangfang

2013-11-01

Although a growing body of research documents the negative association between school connectedness and adolescent problematic Internet use (PIU), little is known about the mediating mechanism (i.e., how school connectedness relates to PIU?) and moderating mechanism (i.e., when the protection is most potent?) underlying this relation. The present study examined whether deviant peer affiliation mediated the relationship between school connectedness and PIU, and whether this mediating process was moderated by adolescent self-control. A total of 2,758 Chinese adolescents (46 % male; mean age = 13.53 years, SD = 1.06) from 10 middle schools completed anonymous questionnaires regarding school connectedness, deviant peer affiliation, self-control, and PIU. After controlling for gender, age, socioeconomic status, and parental attachment, it was found that the negative association between school connectedness and adolescent PIU was partially mediated by deviant peer affiliation. Moreover, this indirect link was stronger for adolescents with low self-control than for those with high self-control. These findings underscore the importance of integrating the social control theory and organism-environment interaction model to understand how and when school connectedness impacts adolescent PIU.

Lifestyle and depressive risk factors associated with problematic internet use in adolescents in an Arabian Gulf culture.

PubMed

Bener, Abdulbari; Bhugra, Dinesh

2013-01-01

The use of the Internet has increased around the world but more so in the Middle Eastern countries, particularly in the Arabian Gulf region. This has also produced problematic Internet use (PIU) with potential detrimental effects on physical, mental, and psychosocial health. To determine the prevalence of PIU and its association with Beck Depression Inventory (BDI), comorbid, and lifestyle factors among adolescent and young adult (12- to 25-year-old) Qatari population. A cross-sectional survey. All public and private schools and university under the Supreme Council of Education and Higher Education in Doha, Qatar. A total of 3000 students (12-25 years of age) were selected through multistage stratified random sampling from public and private schools and university under the overall administration of Qatar Supreme Council of Education. Among them, 2298 students (76.6%) consented to participate in the study during September 2009 to October 2010. Data were collected using a structured questionnaire including sociodemographic details, lifestyle, and dietary habits. Problematic Internet use and depressive tendencies were measured through validated Internet Addiction Test (IAT) and BDI. Of 2298, 71.6% were males and 28.4% were females. The overall prevalence of PIU was 17.6%. This study revealed that a significantly larger proportion of males (64.4%; P = 0.001) and Qatari students (62.9%; P < 0.001) had PIU. Students with PIU slept significantly less number of hours (6.43 ± 1.70) than non-PIU group (6.6 ± 1.80; P = 0.027). The proportion of students participating in moderate physical activity was significantly lower among those with PIU than in other group (47.8% vs 55.7%; P = 0.005). Qatari nationality (odds ratio [OR] = 1.82; P < 0.001), male sex (OR = 1.40; P < 0.001), having nonworking mother (housewife) (OR = 1.34; P = 0.009), eating fast foods (OR = 1.57; P < 0.001), and BDI score (OR = 1.14; P = 0.003) were positively associated with PIU, whereas moderate and mild physical activity were negatively associated with PIU (OR = 0.73, P = 0.002; OR, 0.77, P = 0.003, respectively). This study adds to the growing body of evidence linking PIU with negative lifestyle and depressive risk factors, among vulnerable adolescent and young adult. Problematic Internet use is becoming a significant public health issue that requires urgent attention.

The Prevalence of Problematic Internet Use and the Related Factors in Medical Students, Kerman, Iran

PubMed Central

Mazhari, Shahrzad

2012-01-01

Background Although problematic Internet use (PIU) is a growing problem among adolescents, few studies have examined its prevalence among university students in Iran. This study was designed to investigate the prevalence of PIU and its potential risk factors among students at Kerman University of Medical Sciences, Kerman, Iran. Methods In a cross-sectional study, data was collected from 976 university students. PIU was assessed by the 18-item Problematic Internet Use Questionnaire. In addition, information on demographics and Internet usage pattern was also collected. Findings A total of 920 students completed the survey (response rate = 94.8%). Of them, 98% were Internet users. Overall, 21% of the students were identified as problematic Internet users. Logistic regression analysis showed that spending more time online, having a history of psychiatric disorders, and using the Internet for chatting and playing games were risk factors for PIU. Conclusion PIU is a common problem among university students. These results suggest the need for preventive and interventional strategies for this vulnerable group. PMID:24494141

Positive metacognitions about Internet use: The mediating role in the relationship between emotional dysregulation and problematic use.

PubMed

Casale, Silvia; Caplan, Scott E; Fioravanti, Giulia

2016-08-01

The present study hypothesized that two specific positive metacognitions about Internet use (i.e. the belief that Internet use is useful in regulating negative emotions and the belief that it affords greater controllability) mediate the association between emotional dysregulation and problematic Internet use (PIU). A total of 293 undergraduate university students (male 48.4%; mean age=21.73+2.17) participated in the study. The assessed structural model produced adequate fit to the data (χ(2)=203.76; df=81; p<.001; RMSEA [90% CI]=.07 [.06-.08]; CFI=.95; SRMR=.08). Variables accounted for 46% of the variance in PIU levels. A partial mediation model in which emotional dysregulation predicted PIU levels through positive metacognitions associated with Internet use was found. The presence of a direct relationship between emotional dysregulation and PIU was also detected. Moreover, the study found that emotional dysregulation might drive symptoms of PIU to a greater extent than high negative emotionality. Copyright © 2016 Elsevier Ltd. All rights reserved.

Using metaphors to investigate cognition-behavior link in problematic Internet use among college students.

PubMed

Koc, Mustafa

2015-09-01

This study employed metaphor analysis as a novel approach to explore college students' metaphorical representations of the Internet and their associations with problematic Internet use (PIU). It aimed to find out whether normal and problematic Internet users conceive the Internet through the same cognitive framework. The sample included 370 college students in Turkey. A questionnaire was conducted to gather metaphorical conceptions of the Internet, patterns of Internet usage, and PIU status. Data were analyzed both qualitatively and quantitatively. Of the sample, 8.6% were diagnosed with PIU. Home access and entertainment gratification were strong correlates of PIU. Gender and major had no effects on PIU. Participants produced 66 metaphors that were grouped into eight conceptual categories: information source, immensity, basic need, addictive substance, double-edged sword, transporter, mood regulator, and supporter. PIU was the highest in the addictive substance category, followed by basic need and mood regulator categories, with cigarette, water, and friend being the dominant metaphors in these categories, respectively. Problematic users are less likely to conceptualize the Internet as a supportive entity. Normal users are able to verbalize the good and bad aspects of the Internet, but those negatively affected appear to have lost sight of the most useful function of the Internet. © 2014 Wiley Publishing Asia Pty Ltd.

Problematic internet use and problematic online gaming are not the same: findings from a large nationally representative adolescent sample.

PubMed

Király, Orsolya; Griffiths, Mark D; Urbán, Róbert; Farkas, Judit; Kökönyei, Gyöngyi; Elekes, Zsuzsanna; Tamás, Domokos; Demetrovics, Zsolt

2014-12-01

There is an ongoing debate in the literature whether problematic Internet use (PIU) and problematic online gaming (POG) are two distinct conceptual and nosological entities or whether they are the same. The present study contributes to this question by examining the interrelationship and the overlap between PIU and POG in terms of sex, school achievement, time spent using the Internet and/or online gaming, psychological well-being, and preferred online activities. Questionnaires assessing these variables were administered to a nationally representative sample of adolescent gamers (N=2,073; Mage=16.4 years, SD=0.87; 68.4% male). Data showed that Internet use was a common activity among adolescents, while online gaming was engaged in by a considerably smaller group. Similarly, more adolescents met the criteria for PIU than for POG, and a small group of adolescents showed symptoms of both problem behaviors. The most notable difference between the two problem behaviors was in terms of sex. POG was much more strongly associated with being male. Self-esteem had low effect sizes on both behaviors, while depressive symptoms were associated with both PIU and POG, affecting PIU slightly more. In terms of preferred online activities, PIU was positively associated with online gaming, online chatting, and social networking, while POG was only associated with online gaming. Based on our findings, POG appears to be a conceptually different behavior from PIU, and therefore the data support the notion that Internet Addiction Disorder and Internet Gaming Disorder are separate nosological entities.

Problematic Internet Use and Problematic Online Gaming Are Not the Same: Findings from a Large Nationally Representative Adolescent Sample

PubMed Central

Griffiths, Mark D.; Urbán, Róbert; Farkas, Judit; Kökönyei, Gyöngyi; Elekes, Zsuzsanna; Tamás, Domokos; Demetrovics, Zsolt

2014-01-01

Abstract There is an ongoing debate in the literature whether problematic Internet use (PIU) and problematic online gaming (POG) are two distinct conceptual and nosological entities or whether they are the same. The present study contributes to this question by examining the interrelationship and the overlap between PIU and POG in terms of sex, school achievement, time spent using the Internet and/or online gaming, psychological well-being, and preferred online activities. Questionnaires assessing these variables were administered to a nationally representative sample of adolescent gamers (N=2,073; Mage=16.4 years, SD=0.87; 68.4% male). Data showed that Internet use was a common activity among adolescents, while online gaming was engaged in by a considerably smaller group. Similarly, more adolescents met the criteria for PIU than for POG, and a small group of adolescents showed symptoms of both problem behaviors. The most notable difference between the two problem behaviors was in terms of sex. POG was much more strongly associated with being male. Self-esteem had low effect sizes on both behaviors, while depressive symptoms were associated with both PIU and POG, affecting PIU slightly more. In terms of preferred online activities, PIU was positively associated with online gaming, online chatting, and social networking, while POG was only associated with online gaming. Based on our findings, POG appears to be a conceptually different behavior from PIU, and therefore the data support the notion that Internet Addiction Disorder and Internet Gaming Disorder are separate nosological entities. PMID:25415659

VizieR Online Data Catalog: H2, D2, and HD c3Πu;

NASA Astrophysics Data System (ADS)

Liu, X.; Shemansky, D. E.; Yoshii, J.; Liu, M. J.; Johnson, P. V.; Malone, C. P.; Khakoo, M. A.

2017-11-01

The c3{Pi}u state of the hydrogen molecule has the triplet-state excitation cross-section, and plays an important role in the heating of the upper thermospheres of outer planets by electron excitation. Precise energies of the H2, D2, and HD c3{Pi}u-(v,N) levels are calculated from highly accurate ab initio potential energy curves that include relativistic, radiative, and empirical non-adiabatic corrections. The emission yields are determined from predissociation rates and refined radiative transition probabilities. The excitation function and excitation cross-section of the c3{Pi}u state are extracted from previous theoretical calculations and experimental measurements. The emission cross-section is determined from the calculated emission yield and the extracted excitation cross-section. The kinetic energy (Ek) distributions of H atoms produced via the predissociation of the c3{Pi}u state, the c3{Pi}u--b3{Sigma}u+ dissociative emission by the magnetic dipole and electric quadrupole, and the c3{Pi}u-a3{Sigma}g+-b3{Sigma}u+ cascade dissociative emission by the electric dipole are obtained. The predissociation of the c3{Pi}u+ and c3{Pi}u- states both produce H(1s) atoms with an average Ek of ~4.1eV/atom, while the c3{Pi}u--b3{Sigma}u+ dissociative emissions by the magnetic dipole and electric quadrupole give an average Ek of ~1.0 and ~0.8eV/atom, respectively. The c3{Pi}u-a3{Sigma}g+-b3{Sigma}u+ cascade and dissociative emission gives an average Ek of ~1.3 eV/atom. On average, each H2 excited to the c3{Pi}u state in an H2-dominated atmosphere deposits ~7.1eV into the atmosphere while each H2 directly excited to the a3{Sigma}g+ and d3{Pi}u states contribute ~2.3 and ~3.3eV, respectively, to the atmosphere. The spectral distribution of the calculated continuum emission arising from the X1{Sigma}g+-c3{Pi}u excitation is significantly different from that of direct a3{Sigma}g+ or d3{Pi}u excitations. (5 data files).

Gender Differences in and the Relationships Between Social Anxiety and Problematic Internet Use: Canonical Analysis

PubMed Central

Özteke Kozan, Hatice İrem; Kesici, Şahin

2018-01-01

Background The cognitive-behavioral model of problematic Internet use (PIU) proposes that psychological well-being is associated with specific thoughts and behaviors on the Internet. Hence, there is growing concern that PIU is associated with psychological impairments. Objective Given the proposal of gender schema theory and social role theory, men and women are predisposed to experience social anxiety and engage in Internet use differently. Thus, an investigation of gender differences in these areas is warranted. According to the cognitive-behavioral model of PIU, social anxiety is associated with specific cognitions and behaviors on the Internet. Thus, an investigation of the association between social anxiety and PIU is essential. In addition, research that takes into account the multidimensional nature of social anxiety and PIU is lacking. Therefore, this study aimed to explore multivariate gender differences in and the relationships between social anxiety and PIU. Methods Participants included 505 college students, of whom 241 (47.7%) were women and 264 (52.3%) were men. Participants’ ages ranged from 18 to 22 years, with a mean age of 20.34 (SD=1.16). The Social Anxiety Scale and Problematic Internet Use Scale were used in data collection. Multivariate analysis of variance (MANOVA) and canonical correlation analysis were used. Results Mean differences between men and women were not statistically significant in social anxiety (λ=.02, F3,501=2.47, P=.06). In all three PIU dimensions, men scored higher than women, and MANOVA shows that multivariate difference was statistically significant (λ=.94, F3,501=10.69, P<.001). Of the canonical correlation functions computed for men, only the first was significant (Rc=.43, λ=.78, χ29=64.7, P<.001) and accounted for 19% of the overlapping variance. Similarly, only the first canonical function was significant for women (Rc=.36, λ=.87, χ29=33.9, P<.001), which accounted for 13% of the overlapping variance. Conclusions On the basis of the findings, we conclude that enhanced educational opportunities for women and their increasing role in the society have led women to become more active and thus closed the gap in social anxiety levels between men and women. We found that men showed more difficulties than women in terms of running away from personal problems (ie, social benefit), used the Internet more excessively, and experienced more interpersonal problems with significant others due to Internet use. We conclude that men are under a greater risk of social impairments due to PIU. Our overall conclusion is that there is a substantial amount of association between social anxiety and PIU and the association is stronger for men than it is for women. We advise that future research continue to investigate PIU and social anxiety as multidimensional constructs. PMID:29367182

Problematic internet use as an age-related multifaceted problem: Evidence from a two-site survey.

PubMed

Ioannidis, Konstantinos; Treder, Matthias S; Chamberlain, Samuel R; Kiraly, Franz; Redden, Sarah A; Stein, Dan J; Lochner, Christine; Grant, Jon E

2018-06-01

Problematic internet use (PIU; otherwise known as Internet Addiction) is a growing problem in modern societies. There is scarce knowledge of the demographic variables and specific internet activities associated with PIU and a limited understanding of how PIU should be conceptualized. Our aim was to identify specific internet activities associated with PIU and explore the moderating role of age and gender in those associations. We recruited 1749 participants aged 18 and above via media advertisements in an Internet-based survey at two sites, one in the US, and one in South Africa; we utilized Lasso regression for the analysis. Specific internet activities were associated with higher problematic internet use scores, including general surfing (lasso β: 2.1), internet gaming (β: 0.6), online shopping (β: 1.4), use of online auction websites (β: 0.027), social networking (β: 0.46) and use of online pornography (β: 1.0). Age moderated the relationship between PIU and role-playing-games (β: 0.33), online gambling (β: 0.15), use of auction websites (β: 0.35) and streaming media (β: 0.35), with older age associated with higher levels of PIU. There was inconclusive evidence for gender and gender × internet activities being associated with problematic internet use scores. Attention-deficit hyperactivity disorder (ADHD) and social anxiety disorder were associated with high PIU scores in young participants (age ≤ 25, β: 0.35 and 0.65 respectively), whereas generalized anxiety disorder (GAD) and obsessive-compulsive disorder (OCD) were associated with high PIU scores in the older participants (age > 55, β: 6.4 and 4.3 respectively). Many types of online behavior (e.g. shopping, pornography, general surfing) bear a stronger relationship with maladaptive use of the internet than gaming supporting the diagnostic classification of problematic internet use as a multifaceted disorder. Furthermore, internet activities and psychiatric diagnoses associated with problematic internet use vary with age, with public health implications. Crown Copyright © 2018. Published by Elsevier Ltd. All rights reserved.

A preliminary investigation on the relationship between virtues and pathological internet use among Chinese adolescents

PubMed Central

2014-01-01

Background Pathological Internet Use (PIU) has become a global issue associated with the increasing number of Internet users. Previous studies concerned both the interpersonal and intrapersonal vulnerable factors and the corresponding models. However, a limited amount of research has explored the relationship between positive factors and PIU. Objective The current investigation attempted to clarify the relationship between virtues and PIU among Chinese adolescents; it also sought to explore the specific contributions of the three virtues. Virtue was the core concept in positive psychology and the Values in Action Classification. A recent study demonstrated that there might be three universal virtues (relationship, vitality, and conscientiousness). Methods A cross-sectional sample of adolescents aged 12-17 years were recruited in 2013. A total of 674 adolescents (males = 302, females = 372; junior high school = 296, senior high school = 378) from eight junior and senior high schools in four provinces of Mainland China completed a package of psychological inventories, including the Chinese Virtues Questionnaire (CVQ) and the Adolescent Pathological Internet Use Scale (APIUS). The mean age of the current sample was 15.10 years (SD = 1.81) with an average of 5.31 years’ length (SD = 2.09) of Internet use. Results A total of 9.50% participants exhibited significant symptoms of PIU. Male students (Mmale = 2.50) had significantly higher scores on PIU than female students (Mfemale = 2.25). Relationship (β = -.24) and conscientiousness (β = -.21) negatively predicted PIU, whereas vitality (β = .25) positively predicted PIU. Dominance analysis further revealed that relationship and conscientiousness could explain 81% variance of PIU, and vitality only accounted for another 19%. Conclusions Relationship and conscientiousness were possible protective factors of pathological Internet users, while vitality was vulnerable. The results could be helpful in screening “at-risk” Internet users (low relationship and conscientiousness as well as high vitality). Future intervention strategies could focus on how to enhance relationship and conscientiousness and on how to reduce vitality. PMID:24594317

Problematic Internet Use among Greek university students: an ordinal logistic regression with risk factors of negative psychological beliefs, pornographic sites, and online games.

PubMed

Frangos, Christos C; Frangos, Constantinos C; Sotiropoulos, Ioannis

2011-01-01

The aim of this paper is to investigate the relationships between Problematic Internet Use (PIU) among university students in Greece and factors such as gender, age, family condition, academic performance in the last semester of their studies, enrollment in unemployment programs, amount of Internet use per week (in general and per application), additional personal habits or dependencies (number of coffees, alcoholic drinks drunk per day, taking substances, cigarettes smoked per day), and negative psychological beliefs. Data were gathered from 2,358 university students from across Greece. The prevalence of PIU was 34.7% in our sample, and PIU was significantly associated with gender, parental family status, grade of studies during the previous semester, staying or not with parents, enrollment of the student in an unemployment program, and whether the student paid a subscription to the Internet (p < 0.0001). On average, problematic Internet users use MSN, forums, YouTube, pornographic sites, chat rooms, advertisement sites, Google, Yahoo!, their e-mail, ftp, games, and blogs more than non-problematic Internet users. PIU was also associated with other potential addictive personal habits of smoking, drinking alcohol or coffee, and taking drugs. Significant risk factors for PIU were being male, enrolment in unemployment programs, presence of negative beliefs, visiting pornographic sites, and playing online games. Thus PIU is prevalent among Greek university students and attention should be given to it by health officials.

Differential physiological changes following internet exposure in higher and lower problematic internet users

PubMed Central

Romano, Michela; Re, Federica; Roaro, Alessandra; Osborne, Lisa A.; Viganò, Caterina; Truzoli, Roberto

2017-01-01

Problematic internet use (PIU) has been suggested as in need of further research with a view to being included as a disorder in future Diagnostic and Statistical Manual (DSM) of the American Psychiatric Association, but lack of knowledge about the impact of internet cessation on physiological function remains a major gap in knowledge and a barrier to PIU classification. One hundred and forty-four participants were assessed for physiological (blood pressure and heart rate) and psychological (mood and state anxiety) function before and after an internet session. Individuals also completed a psychometric examination relating to their usage of the internet, as well as their levels of depression and trait anxiety. Individuals who identified themselves as having PIU displayed increases in heart rate and systolic blood pressure, as well as reduced mood and increased state of anxiety, following cessation of internet session. There were no such changes in individuals with no self-reported PIU. These changes were independent of levels of depression and trait anxiety. These changes after cessation of internet use are similar to those seen in individuals who have ceased using sedative or opiate drugs, and suggest PIU deserves further investigation and serious consideration as a disorder. PMID:28542470

Predissociation of oxygen in the B3Sigma(u)(-) state

NASA Technical Reports Server (NTRS)

Chiu, S. S.-L.; Cheung, A. S.-C.; Finch, M.; Jamieson, M. J.; Yoshino, K.; Dalgarno, A.; Parkinson, W. H.

1992-01-01

The predissociation linewidths and level shifts of vibrational levels of three oxygen isotopic molecules (O2)-16, (O-16)(O-18), and (O2)-18 arising from the interactions of the B3Sigma(u)(-) state with the four repulsive states 5Pi(u), 3Sigma(u)(+), 3Pi(u), and 1Pi(u) have been calculated. A set of parameters characterizing these interactions has been determined. Good agreement between calculated and experimental predissociation widths and shifts has been obtained for all the three isotopic molecules.

Gender Differences in and the Relationships Between Social Anxiety and Problematic Internet Use: Canonical Analysis.

PubMed

Baloğlu, Mustafa; Özteke Kozan, Hatice İrem; Kesici, Şahin

2018-01-24

The cognitive-behavioral model of problematic Internet use (PIU) proposes that psychological well-being is associated with specific thoughts and behaviors on the Internet. Hence, there is growing concern that PIU is associated with psychological impairments. Given the proposal of gender schema theory and social role theory, men and women are predisposed to experience social anxiety and engage in Internet use differently. Thus, an investigation of gender differences in these areas is warranted. According to the cognitive-behavioral model of PIU, social anxiety is associated with specific cognitions and behaviors on the Internet. Thus, an investigation of the association between social anxiety and PIU is essential. In addition, research that takes into account the multidimensional nature of social anxiety and PIU is lacking. Therefore, this study aimed to explore multivariate gender differences in and the relationships between social anxiety and PIU. Participants included 505 college students, of whom 241 (47.7%) were women and 264 (52.3%) were men. Participants' ages ranged from 18 to 22 years, with a mean age of 20.34 (SD=1.16). The Social Anxiety Scale and Problematic Internet Use Scale were used in data collection. Multivariate analysis of variance (MANOVA) and canonical correlation analysis were used. Mean differences between men and women were not statistically significant in social anxiety (λ=.02, F3,501=2.47, P=.06). In all three PIU dimensions, men scored higher than women, and MANOVA shows that multivariate difference was statistically significant (λ=.94, F3,501=10.69, P<.001). Of the canonical correlation functions computed for men, only the first was significant (Rc=.43, λ=.78, χ29=64.7, P<.001) and accounted for 19% of the overlapping variance. Similarly, only the first canonical function was significant for women (Rc=.36, λ=.87, χ29=33.9, P<.001), which accounted for 13% of the overlapping variance. On the basis of the findings, we conclude that enhanced educational opportunities for women and their increasing role in the society have led women to become more active and thus closed the gap in social anxiety levels between men and women. We found that men showed more difficulties than women in terms of running away from personal problems (ie, social benefit), used the Internet more excessively, and experienced more interpersonal problems with significant others due to Internet use. We conclude that men are under a greater risk of social impairments due to PIU. Our overall conclusion is that there is a substantial amount of association between social anxiety and PIU and the association is stronger for men than it is for women. We advise that future research continue to investigate PIU and social anxiety as multidimensional constructs. ©Mustafa Baloğlu, Hatice İrem Özteke Kozan, Şahin Kesici. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 24.01.2018.

VizieR Online Data Catalog: H2 d3{Pi}u excitation by elec

NASA Astrophysics Data System (ADS)

Liu, X.; Shemansky, D. E.; Yoshii, J.; Johnson, P. V.; Malone, C. P.; Ajello, J. M.

2016-05-01

Electron-impact excitation of H2 triplet states plays an imp role in the heating of outer planet upper thermospheres. The d3{Pi}u state is the third ungerade triplet state, and the d3{Pi}u-a3{Sigma}g+ emission is the largest cascade channel for the a3{Sigma}g+ state. Accurate energies of the d3{Pi}u-(v, J) levels are calculated from an ab initio potential energy curve. Radiative lifetimes of the d3{Pi}u(v,J) levels are obtained by an accurate evaluation of the d3{Pi}u-a3{Sigma}g+ transition probabilities. The emission yields are determined from experimental lifetimes and calculated radiative lifetimes and are further verified by comparing experimental and synthetic d3{Pi}u-a3{Sigma}g+ spectra at 20eV impact energy. Spectral analysis revealed that multipolar components beyond the dipolar term are required to model the X1{Sigma}g+-d3{Pi}u excitation, and significant cascade excitation occurs at the d3{Pi}u (v=0,1) levels. Kinetic energy (Ek) distributions of H atoms produced via predissociation of the 3{Pi}u state and the d3{Pi}u-a3{Sigma}g+-b3{Sigma}u+ cascade dissociative emission are obtained. Predissociation of the d3{Pi}u state produces H atoms with an average Ek of 2.3+/-0.4 eV/atom, while the Ekdistribution of the d3{Pi}u-a3{Sigma}g+-b3{Sigma}u+ channel is similar to that of the X1{Sigma}g+-a3{Sigma}g+-b3{Sigma}u+ channel and produces H(1s) atoms with an average Ek of 1.15+/-0.05eV/atom. On average, each H2 excited to the d3{Pi}u state in an H2-dominated atmosphere deposits 3.3+/-0.4eV into the atmosphere, while each H2directly excited to the a3{Sigma}g+ state gives 2.2-2.3eV to the atmosphere. The spectral distribution of the calculated a3{Sigma}g+-b3{Sigma}u+ continuum emission due to the X1{Sigma}g+-d3{Pi}u excitation is significantly different from that of direct a3{Sigma}g+ excitation. (2 data files).

Purposes of Internet use and problematic Internet use among Turkish high school students.

PubMed

Demirer, Veysel; Bozoglan, Bahadir

2016-12-01

After the emergence of the Internet, the sudden increase in its use soon attracted attention to this phenomenon. Studies have shown that there is a relationship between problematic Internet use (PIU) and the purposes of Internet use. The aims of this study are to examine the purposes of Internet use among Turkish high school students according to their gender, frequency of Internet use (FIU), grade point average (GPA) and family income (F-income), and to investigate whether all these variables predict PIU. The participants in the study were 375 high school students (185 girls and 190 boys), and verbal consent was obtained from the subjects before application. The participants' ages ranged between 14 and 18 (Mean = 15.6, SD = 1.26). One-way analysis of variance was used to identify the purposes of Internet use in terms of demographic variables. Also, hierarchical multiple regression analyses were conducted to explore whether demographic variables and purposes of Internet use affected PIU. Finally, the results demonstrate that male gender, high FIU, low GPA, and high levels of F-income correlate significantly with PIU. Also, the social, leisure and virtual-emotional purposes of Internet use, besides demographic variables, were significantly correlated with PIU. © 2015 Wiley Publishing Asia Pty Ltd.

Comparing online opportunities and risks among Israeli children and youth Hebrew and Arabic speakers

NASA Astrophysics Data System (ADS)

Blau, Ina

2014-10-01

This study explores the relationships between application usage, online communication patterns, problematic Internet use (PIU) of online applications, and online self-disclosure among children from culturally different groups. An online survey was administered in Hebrew and Arabic among 3867 Israeli 7-17 year old, including Jews, Arabs, and Bedouins. The level of PIU was relatively low-only 9.5% scored "very high" in the PIU index. For all the groups the highest level of communication was reported for safe interactions with family and friends, lower level for purely virtual communication with online acquaintances, and the lowest level for meeting online acquaintances face-to-face. However, various forms of the online communication patterns and use of applications differed across the groups, suggesting cultural diversity in Internet usage among children in the same country. PIU and self-disclosure explained 47.3% of variance in risky e-communication activities (e.g. sending ones' photos to online acquaintances, providing them with a school or home address, and meeting them face-to-face), as well as 34.4% of variance in exposure to unpleasant online experiences (e.g. receiving messages, pictures, or videos that make the children feel uncomfortable). However, both PIU and self-disclosure were unrelated to educational activities and to the use of educational applications.

Screening for Adolescent Problematic Internet Use: Validation of the Problematic and Risky Internet Use Screening Scale (PRIUSS).

PubMed

Jelenchick, Lauren A; Eickhoff, Jens; Zhang, Chong; Kraninger, Kristina; Christakis, Dimitri A; Moreno, Megan A

2015-01-01

Problematic Internet use (PIU) is an emerging health concern that lacks screening measures validated for use with adolescents and young adults. This study aimed to validate the Problematic and Risky Internet Use Screening Scale (PRIUSS) for use with older adolescents and to increase its clinical utility by determining scoring guidelines and assessing the relationship between PIU and other mental health conditions. This cross-sectional survey study took place at a large, public Midwestern university among 330 older adolescents aged 18 to 25 years. Confirmatory factor analysis and Spearman's correlations were used to assess the PRIUSS' structural and construct validity, respectively. A risk-based scoring cutoff was estimated using a Bayesian latent class modeling approach to computing a receiver operating characteristic curve. The confirmatory factor analysis indices for the 3-factor model indicated an acceptable fit (goodness-of-fit index 0.89, root mean square error of approximation 0.07). A cutoff of 25 (sensitivity 0.80, 95% confidence interval [CI] 0.47-0.99; specificity 0.79, 95% CI 0.73-0.84) is proposed for identifying those at risk for PIU. Participants at risk for PIU were at significantly greater odds of also reporting symptoms of attention-deficit/hyperactivity disorder (odds ratio [OR] 2.36 95% CI 1.21-4.62, P = .009), depression (OR 3.25, 95% CI 1.65-6.42, P = .008), and social anxiety (OR 3.77, 95% CI 2.06-6.89, P < .000). The PRIUSS demonstrated validity as a PIU screening instrument for adolescents and young adults. Screening for PIU may also help to identify those at high reciprocal risk for other mental health conditions. Copyright © 2015. Published by Elsevier Inc.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ben-Dov, Nadav; Korenstein, Rafi, E-mail: korens@post.tau.ac.il

Recently it has been shown that elevating proton concentration at the cell surface stimulates the formation of membrane invaginations and vesicles accompanied by an enhanced uptake of macromolecules. While the initial induction of inward membrane curvature was rationalized in terms of proton-based increase of charge asymmetry across the membrane, the mechanisms underlying vesicle formation and its scission are still unknown. In light of the critical role of actin in vesicle formation during endocytosis, the present study addresses the involvement of cytoskeletal actin in proton-induced uptake (PIU). The uptake of dextran-FITC is used as a measure for the factual fraction ofmore » inward invaginations that undergo scission from the cell's plasma membrane. Our findings show that the rate of PIU in suspended cells is constant, whereas the rate of PIU in adherent cells is gradually increased in time, saturating at the level possessed by suspended cells. This is consistent with pH induced gradual degradation of stress-fibers in adherent cells. Wortmannin and calyculin-A are able to elevate PIU by 25% in adherent cells but not in suspended cells, while cytochalasin-D, rapamycin and latrunculin-A elevate PIU both in adherent and suspended cells. However, extensive actin depolymerization by high concentrations of latrunculin-A is able to inhibit PIU. We conclude that proton-induced membrane vesiculation is restricted by the actin structural resistance to the plasma membrane bending. Nevertheless, a certain degree of cortical actin restructuring is required for the completion of the scission process. - Highlights: ► Acidification of cells' exterior enhances uptake of macromolecules by the cells. ► Disruption of actin stress fibers leads to enhancement of proton induced uptake. ► Extensive depolymerization of cellular actin attenuates proton-induced uptake.« less

Social Anxiety and Loneliness in Adults Who Solicit Minors Online.

PubMed

Schulz, Anja; Bergen, Emilia; Schuhmann, Petya; Hoyer, Jürgen

2017-09-01

This study examined the association of social anxiety, loneliness, and problematic Internet use (PIU) with the online solicitation of minors. Within a convenience sample of adult Internet users from Germany, Finland, and Sweden ( N = 2,828), we compared the responses of participants who had not interacted sexually with strangers online ( n = 2,049) with participants who sexually interacted with unknown adults online ( n = 642), and both groups with adults who sexually solicited unknown minors online ( n = 137). Online sexual interaction with adults was associated with higher levels of social anxiety, loneliness, and PIU compared with not sexually interacting with strangers online. Sexually soliciting minors online was associated with higher levels of social anxiety, loneliness, and PIU compared with sexually interacting with adults and not sexually interacting with strangers at all. Interestingly, compared with those with adult contacts, loneliness was specifically pronounced for participants who solicited children, whereas social anxiety and PIU were pronounced for participants soliciting adolescents. These findings suggest that social anxiety, loneliness, and PIU may be among the motivators for using the Internet to solicit individuals of different age groups for sexual purposes. These factors emerged as specifically relevant for adults who sexually solicited minors and who reported greater impairments compared with adults who sexually interacted with adults. These characteristics may thus be important to consider for assessment and treatment procedures for individuals soliciting minors online.

Loneliness and Shyness in Adolescent Problematic Internet Users: The Role of Social Anxiety

ERIC Educational Resources Information Center

Huan, Vivien S.; Ang, Rebecca P.; Chye, Stefanie

2014-01-01

Background: Davis' ("Comput Hum Behav" 17:187-195, 2001) cognitive-behavioral model of problematic Internet use (PIU) proposed and theorized that certain psychopathological characteristics present within an individual, predispose him to PIU. Objective: This study extended Davis' model in hypothesizing that social anxiety mediates in a…

Problematic Internet Use: Perceptions of Addiction Counsellors

ERIC Educational Resources Information Center

Acier, Didier; Kern, Laurence

2011-01-01

Despite a growing number of publications on problematic Internet use (PIU), there is no consensus on the nature of the phenomenon, its constituent criteria, and its clinical threshold. This qualitative study examines the perceptions of addiction counsellors who have managed individuals with PIU in Quebec (Canada). Four focus groups were conducted…

The Moderating Effect of Geographic Area on the Relationship Between Age, Gender, and Information and Communication Technology Literacy and Problematic Internet Use.

PubMed

Yu, Liang; Recker, Mimi; Chen, Shijian; Zhao, Nan; Yang, Qiuyan

2018-06-01

This study investigated the relationship between adolescents' problematic Internet use (PIU) and demographic characteristics such as age, gender, and information and communication technology (ICT) literacy and the moderating effect of geographic area on this relationship using a cross-sectional research design. The study sample comprised 2160 adolescents from the Chongqing area of China and consisted of 47.3 percent boys (N = 1022) and 52.7 percent girls (N = 1138). Participants anonymously completed a 38-item questionnaire that examined their Internet use, behaviors, and attitudes, ICT literacy, parents' education level, and other demographic information. The results showed that the geographic area in which respondents lived (urban vs. rural), gender, age, father's education, mother's education, and ICT literacy had significant relationships with PIU. Moreover, hierarchical multiple regression analyses indicated that geographic area was found to be a significant moderator for both age and gender in their relationship with PIU. These findings suggest that it is essential to address differences between urban and rural areas when seeking to mitigate PIU among adolescents.

Structure and Function of the PiuA and PirA Siderophore-Drug Receptors from Pseudomonas aeruginosa and Acinetobacter baumannii

PubMed Central

Moynié, Lucile; Luscher, Alexandre; Rolo, Dora; Tortajada, Antoni; Weingart, Helge; Braun, Yvonne; Page, Malcolm G. P.; Naismith, James H.

2017-01-01

ABSTRACT The outer membrane of Gram-negative bacteria presents an efficient barrier to the permeation of antimicrobial molecules. One strategy pursued to circumvent this obstacle is to hijack transport systems for essential nutrients, such as iron. BAL30072 and MC-1 are two monobactams conjugated to a dihydroxypyridone siderophore that are active against Pseudomonas aeruginosa and Acinetobacter baumannii. Here, we investigated the mechanism of action of these molecules in A. baumannii. We identified two novel TonB-dependent receptors, termed Ab-PiuA and Ab-PirA, that are required for the antimicrobial activity of both agents. Deletion of either piuA or pirA in A. baumannii resulted in 4- to 8-fold-decreased susceptibility, while their overexpression in the heterologous host P. aeruginosa increased susceptibility to the two siderophore-drug conjugates by 4- to 32-fold. The crystal structures of PiuA and PirA from A. baumannii and their orthologues from P. aeruginosa were determined. The structures revealed similar architectures; however, structural differences between PirA and PiuA point to potential differences between their cognate siderophore ligands. Spontaneous mutants, selected upon exposure to BAL30072, harbored frameshift mutations in either the ExbD3 or the TonB3 protein of A. baumannii, forming the cytoplasmic-membrane complex providing the energy for the siderophore translocation process. The results of this study provide insight for the rational design of novel siderophore-drug conjugates against problematic Gram-negative pathogens. PMID:28137795

Prevalence and co-occurrence of compulsive buying, problematic Internet and mobile phone use in college students in Yantai, China: relevance of self-traits.

PubMed

Jiang, Zhaocai; Shi, Mingyan

2016-12-01

Until now, most research in the prevalence of compulsive buying (CB) has been developed from samples in western developed countries, this study aimed to estimate the prevalence and co-morbidities of CB, problematic Internet use (PIU) and problematic mobile phone use (PMPU) in college students in Yantai, China. Moreover, based on the lack of research focusing on differences between CB and addiction, we will explore whether CB and PIU/PMPU individuals are characterized by the same self-traits (i. e., self-control, self-esteem and self-efficacy) related profile. A total of 601 college students were involved in this cross-sectional study. Compulsive buying, problematic Internet and mobile phone use and self-traits were assessed by self-reported questionnaires. The demographic information and use characteristics were included in the questionnaires. The incidence of CB, PIU and PMPU were 5.99, 27.8 and 8.99% respectively. In addition, compared with rural students, students from cities are more likely to get involved in CB. Students using mobile phone to surf the Internet displayed higher risk of PIU than counterparts using computer. Students using Internet or mobile phone longer are more prone to problematic use. Furthermore, we found the strong correlations and high co-morbidities of CB, PIU and PMPU and self-control was the most significant predictor for all three disorders. However, self-esteem and self-efficacy were significant predictors only for CB. Our findings indicated that with the prevalence of CB and PMPU roughly equivalent to that demonstrated in previous studies, PIU in Chinese college students is serious and deserves more attention. Furthermore, besides the impulsive aspect common with addiction, CB is also driven by painful self-awareness derived from low self-regard which implies the obsessive-compulsive aspect.

Relationship between Problematic Internet Use, Depression and Quality of Life Levels of Turkish University Students

ERIC Educational Resources Information Center

Tekinarslan, Erkan

2017-01-01

The relationship between problematic Internet use (PIU), depression and quality of life levels of individuals is a growing concern in many societies. One of the main purposes of this study was to examine the relationships or correlations among PIU, depression and quality of life levels of Turkish undergraduate students. Furthermore, this study…

An exploratory examination of At-Risk/Problematic Internet Use and disordered eating in adults.

PubMed

Ivezaj, Valentina; Potenza, Marc N; Grilo, Carlos M; White, Marney A

2017-01-01

At-Risk/Problematic Internet Use (ARPIU) has been associated with impairment in multiple domains including psychopathology. The present study examined the relationship between ARPIU and disordered eating in a large community sample. Participants (n=1000) completed an online survey about health behaviors. Two thresholds of ARPIU and disordered eating each were examined. The ARPIU and Sub-ED (subthreshold eating disorders) groups reported greater depressive symptoms and poorer self-control than the Control group; the Sub-ED group reported greater impulsivity than the Control group. The ARPIU and Sub-ED groups significantly differed in key features related to each condition. Finally, the co-occurrence of ARPIU and Sub-ED was associated with greater depression. In the second set of analyses based on more stringent thresholds, the Problematic Internet Use (PIU) and ED groups differed on all measures compared to the Control group. The PIU and ED groups also differed on key features related to each condition, but did not differ on measures of impulsivity or self-control. The co-occurrence of PIU and ED was associated with greater depressive symptoms than either PIU or ED independently. ARPIU and Sub-ED share links to depression and poor self-control and these may represent possible therapeutic targets across Internet-use and disordered-eating behaviors. Co-occurring PIU and ED at either lenient or stringent thresholds is associated with greater depression. Future studies should examine the temporal nature of these associations and the extent to which targeting depression, Internet use, or disordered eating may lead to improvements across domains. Copyright © 2015 Elsevier Ltd. All rights reserved.

Structure and Function of the PiuA and PirA Siderophore-Drug Receptors from Pseudomonas aeruginosa and Acinetobacter baumannii.

PubMed

Moynié, Lucile; Luscher, Alexandre; Rolo, Dora; Pletzer, Daniel; Tortajada, Antoni; Weingart, Helge; Braun, Yvonne; Page, Malcolm G P; Naismith, James H; Köhler, Thilo

2017-04-01

The outer membrane of Gram-negative bacteria presents an efficient barrier to the permeation of antimicrobial molecules. One strategy pursued to circumvent this obstacle is to hijack transport systems for essential nutrients, such as iron. BAL30072 and MC-1 are two monobactams conjugated to a dihydroxypyridone siderophore that are active against Pseudomonas aeruginosa and Acinetobacter baumannii Here, we investigated the mechanism of action of these molecules in A. baumannii We identified two novel TonB-dependent receptors, termed Ab -PiuA and Ab -PirA, that are required for the antimicrobial activity of both agents. Deletion of either piuA or pirA in A. baumannii resulted in 4- to 8-fold-decreased susceptibility, while their overexpression in the heterologous host P. aeruginosa increased susceptibility to the two siderophore-drug conjugates by 4- to 32-fold. The crystal structures of PiuA and PirA from A. baumannii and their orthologues from P. aeruginosa were determined. The structures revealed similar architectures; however, structural differences between PirA and PiuA point to potential differences between their cognate siderophore ligands. Spontaneous mutants, selected upon exposure to BAL30072, harbored frameshift mutations in either the ExbD3 or the TonB3 protein of A. baumannii , forming the cytoplasmic-membrane complex providing the energy for the siderophore translocation process. The results of this study provide insight for the rational design of novel siderophore-drug conjugates against problematic Gram-negative pathogens. Copyright © 2017 American Society for Microbiology.

The Questionnaire of Lifestyle Change in Regard to Problematic Internet Use: Factor Structure and Concurrent and Cross-Year Predictive Utilities

ERIC Educational Resources Information Center

Yeh, Yu-Chen; Lin, Sunny S. J.; Tseng, Yin-Hsing; Hwang, Fang-Ming

2012-01-01

This study constructed a questionnaire, named "Lifestyle Change in Regard to Problematic Internet Use (LC-PIU)," for helping school psychologists detect early indications of PIU-related lifestyle changes in university populations. Our focus is on all university students who use the Internet, not users who already show dependent symptoms.…

Perceived Parent-Adolescent Relationship, Perceived Parental Online Behaviors and Pathological Internet Use among Adolescents: Gender-Specific Differences

PubMed Central

Liu, Qin-Xue; Fang, Xiao-Yi; Zhou, Zong-Kui; Zhang, Jin-Tao; Deng, Lin-Yuan

2013-01-01

This study examined the associations between adolescents’ perceived relationships with their parents, perceived parental online behaviors, and Pathological Internet Use (PIU) among adolescents. Additional testing was carried out to determine the effect of different genders (parent and adolescent). Cross-sectional data was collected from 4,559 students aged 12 to 21 years in the cities of Beijing and Jinan, People’s Republic of China. Participants responded to an anonymous questionnaire concerning their Internet use behavior, perceived parental Internet use behaviors, and perceived parent-adolescent relationship. Hierarchical linear regressions controlling for adolescents’ age were conducted. Results showed different effects of parent and adolescent gender on perceived parent-adolescent relationship and parent Internet use behavior, as well as some other gender-specific associations. Perceived father-adolescent relationship was the most protective factor against adolescent PIU with perceived maternal Internet use positively predicting PIU for both male and female adolescents. However, perceived paternal Internet use behaviors positively predicted only female adolescent PIU. Results indicated a different effect pathway for fathers and mothers on boys and girls, leading to discussion of the implications for prevention and intervention. PMID:24098710

Moderating effects of the family environment for parental mediation and pathological internet use in youths.

PubMed

Chng, Grace S; Li, Dongdong; Liau, Albert K; Khoo, Angeline

2015-01-01

Pathological Internet use (PIU) occurs when excessive Internet use results in addictive symptoms that exert detrimental consequences on one's overall functioning and well-being. Poor family functioning has been found to be associated with youths' addictive Internet use, and parental use of active and restrictive mediation has been found to reduce online risk. The current study aims to test if parental active and restrictive mediation strategies are negatively associated with youths' PIU. Additionally, it also tests the effectiveness of these strategies as a function of the broader family environment with measures of parent-child attachment, family communication, and the youth's comfort with living at home. The data of 3,079 students in Singapore were analyzed through a series of logistic regressions. The results revealed that the family environment for students with PIU was significantly less positive. Only restrictive mediation was found to be negatively associated with PIU. This relation was stronger for higher levels of attachment, communication, and comfort at home, implying that the effectiveness of restrictive mediation varies with the degree of warmth and support in the general family environment. The implications are discussed.

Characteristics of internet addiction/pathological internet use in U.S. university students: a qualitative-method investigation.

PubMed

Li, Wen; O'Brien, Jennifer E; Snyder, Susan M; Howard, Matthew O

2015-01-01

Studies have identified high rates and severe consequences of Internet Addiction/Pathological Internet Use (IA/PIU) in university students. However, most research concerning IA/PIU in U.S. university students has been conducted within a quantitative research paradigm, and frequently fails to contextualize the problem of IA/PIU. To address this gap, we conducted an exploratory qualitative study using the focus group approach and examined 27 U.S. university students who self-identified as intensive Internet users, spent more than 25 hours/week on the Internet for non-school or non-work-related activities and who reported Internet-associated health and/or psychosocial problems. Students completed two IA/PIU measures (Young's Diagnostic Questionnaire and the Compulsive Internet Use Scale) and participated in focus groups exploring the natural history of their Internet use; preferred online activities; emotional, interpersonal, and situational triggers for intensive Internet use; and health and/or psychosocial consequences of their Internet overuse. Students' self-reports of Internet overuse problems were consistent with results of standardized measures. Students first accessed the Internet at an average age of 9 (SD = 2.7), and first had a problem with Internet overuse at an average age of 16 (SD = 4.3). Sadness and depression, boredom, and stress were common triggers of intensive Internet use. Social media use was nearly universal and pervasive in participants' lives. Sleep deprivation, academic under-achievement, failure to exercise and to engage in face-to-face social activities, negative affective states, and decreased ability to concentrate were frequently reported consequences of intensive Internet use/Internet overuse. IA/PIU may be an underappreciated problem among U.S. university students and warrants additional research.

[Pathological Internet use--epidemiology, diagnostics, co-occurring disorders and treatment].

PubMed

Petersen, K U; Weymann, N; Schelb, Y; Thiel, R; Thomasius, R

2009-05-01

In 2009, we can look back on a history of 40 years of internet use. While most consumers make use of the internet in a controlled fashion, a progressive loss of the ability to control the frequency and duration of internet activities emerges in some users. As a consequence, the excessive time devoted to internet use and the behavioural narrowing can lead to dramatic psychosocial outcomes. This phenomenon is referred to as "pathological internet use" (PIU). On behalf of the German ministry of health a systematic review of the literature since 1996 has been carried out. The main results will be presented in this review. Prevalence data on pathological internet use are limited by methodological difficulties concerning the diagnosis and the heterogeneity of diagnostical instruments. International prevalence rates range from 1.5 % to 8.2 %. Annual studies on representative samples of the German population describe their internet use and patterns of use, but information on the prevalence of PIU is missing. Diagnostical instruments are needed that show sufficient reliability and validity and allow international comparisons. Research on the Dutch "Compulsive Internet Use Scale" may close this gap. Cross-sectional studies on samples of patients report high comorbidity of PIU with psychiatric disorders, e. g. affective disorder and attention deficit hyperactivity disorder (ADHD). If PIU and these co-occurring disorders could be explained by shared risk factors or better as secondary disorders is largely unknown. The treatment currently is based on therapeutical interventions and strategies successful in the treatment of substance use disorders. Due to the lack of methodological sufficient research it is currently impossible to recommend any evidence-based treatment of PIU.

Characteristics of Internet Addiction/Pathological Internet Use in U.S. University Students: A Qualitative-Method Investigation

PubMed Central

Li, Wen; O’Brien, Jennifer E.; Snyder, Susan M.; Howard, Matthew O.

2015-01-01

Studies have identified high rates and severe consequences of Internet Addiction/Pathological Internet Use (IA/PIU) in university students. However, most research concerning IA/PIU in U.S. university students has been conducted within a quantitative research paradigm, and frequently fails to contextualize the problem of IA/PIU. To address this gap, we conducted an exploratory qualitative study using the focus group approach and examined 27 U.S. university students who self-identified as intensive Internet users, spent more than 25 hours/week on the Internet for non-school or non-work-related activities and who reported Internet-associated health and/or psychosocial problems. Students completed two IA/PIU measures (Young’s Diagnostic Questionnaire and the Compulsive Internet Use Scale) and participated in focus groups exploring the natural history of their Internet use; preferred online activities; emotional, interpersonal, and situational triggers for intensive Internet use; and health and/or psychosocial consequences of their Internet overuse. Students’ self-reports of Internet overuse problems were consistent with results of standardized measures. Students first accessed the Internet at an average age of 9 (SD = 2.7), and first had a problem with Internet overuse at an average age of 16 (SD = 4.3). Sadness and depression, boredom, and stress were common triggers of intensive Internet use. Social media use was nearly universal and pervasive in participants’ lives. Sleep deprivation, academic under-achievement, failure to exercise and to engage in face-to-face social activities, negative affective states, and decreased ability to concentrate were frequently reported consequences of intensive Internet use/Internet overuse. IA/PIU may be an underappreciated problem among U.S. university students and warrants additional research. PMID:25647224

A power information user (PIU) model to promote information integration in Tennessee's public health community.

PubMed

Sathe, Nila A; Lee, Patricia; Giuse, Nunzia Bettinsoli

2004-10-01

Observation and immersion in the user community are critical factors in designing and implementing informatics solutions; such practices ensure relevant interventions and promote user acceptance. Libraries can adapt these strategies to developing instruction and outreach. While needs assessment is typically a core facet of library instruction, sustained, iterative assessment underlying the development of user-centered instruction is key to integrating resource use into the workflow. This paper describes the Eskind Biomedical Library's (EBL's) recent work with the Tennessee public health community to articulate a training model centered around developing power information users (PIUs). PIUs are community-based individuals with an advanced understanding of information seeking and resource use and are committed to championing information integration. As model development was informed by observation of PIU workflow and information needs, it also allowed for informal testing of the applicability of assessment via domain immersion in library outreach. Though the number of PIUs involved in the project was small, evaluation indicated that the model was useful for promoting information use in PIU workgroups and that the concept of domain immersion was relevant to library-related projects. Moreover, EBL continues to employ principles of domain understanding inherent in the PIU model to develop further interventions for the public health community and library users.

An experimental study of the intersystem crossing and reactions of C2(X1Sigmag+) and C2(a3Pi(u)) with O2 and NO at very low temperature (24-300 K).

PubMed

Páramo, Alejandra; Canosa, André; Le Picard, Sébastien D; Sims, Ian R

2006-03-09

A low-temperature gas-phase kinetics study of the reactions and collisional relaxation processes involving C2(X1Sigma(g)+) and C2(a3Pi(u)) in collision with O2 and NO partners at temperatures from 300 to 24 K is reported. The experiments employed a CRESU (Cinétique de Réaction en Ecoulement Supersonique Uniforme) apparatus to attain low temperatures. The C2 species were created using pulsed laser photolysis at 193 nm of mixtures containing C2Cl4 diluted in N2, Ar, or He carrier gas. C2(X1Sigma(g)+) molecules were detected via pulsed laser-induced fluorescence in the (D1Sigma(u)+ <-- X1Sigma(g)+) system, and C2(a3Pi(u)) molecules were detected via pulsed laser-induced fluorescence in the (d 3Pi(g) <-- a 3Pi(u)) system. Relaxation of 3C2 by intersystem crossing induced by oxygen was measured at temperatures below 200 K, and it was found that this process remains very efficient in the temperature range 50-200 K. Reactivity of C2(X1Sigma(g)+) with oxygen became very inefficient below room temperature. Using these two observations, it was found to be possible to obtain the C2(X1Sigma(g)+) state alone at low temperatures by addition of a suitable concentration of O2 and then study its reactivity with NO without any interference coming from the possible relaxation of C2(a3Pi(u)) to C2(X1Sigma(g)+) induced by this reagent. The rate coefficient for reaction of C2(X1Sigma(g)+) with NO was found to be essentially constant over the temperature range 36-300 K with an average value of (1.6 +/- 0.1) x 10(-10) cm3 molecule(-1) s(-1). Reactivity of C2(a3Pi(u)) with NO was found to possess a slight negative temperature dependence over the temperature range 50-300 K, which is in very good agreement with data obtained at higher temperatures.

Problem Internet Use and Internet Gaming Disorder: a survey of health literacy among psychiatrists from Australia and New Zealand.

PubMed

Dullur, Pravin; Hay, Phillipa

2017-04-01

Research is limited on psychiatrists' opinions on the concepts of Internet Gaming Disorder (IGD) and Problematic Internet Use (PIU). We aimed to assess health literacy among psychiatrists on IGD/PIU. A self-report survey was administered online to members of the Royal Australia and New Zealand College of Psychiatrists (RANZCP) ( n=289). The majority (93.7%) were familiar with the concepts of IGD/PIU. The majority (78.86%) thought it is possible to be 'addicted' to non-gaming internet content, and 76.12% thought non-gaming addictions could possibly be included in classificatory systems. Forty-eight (35.6%) felt that IGD maybe common in their practice. Only 22 (16.3%) felt they were confident in managing IGD. Child psychiatrists were more likely to screen routinely for IGD (11/45 vs. 7/95; Fishers Exact test χ 2 =7.95, df=1, p<0.01) and were more likely to elicit specific symptoms of addiction (16/45 vs. 9/95; Fishers Exact test χ 2 =14.16, df=1, p<0.001). We recommend adoption of terms alternate to PIU/IGD which are more in line with the content of material irrespective of medium of access. Screening instruments/ protocols are needed to assist in early diagnosis and service planning. Barriers to screening would need to be addressed both in research and service settings.

Problematic Internet Use Among US Youth: A Systematic Review

PubMed Central

Moreno, Megan A; Jelenchick, Lauren; Cox, Elizabeth; Young, Henry; Christakis, Dimitri A

2011-01-01

Objectives To investigate study quality and reported prevalence among the emergent area of problematic internet use (PIU) research conducted in populations of US adolescents and college students. Data sources We searched PubMed, PsychInfo and Web of Knowledge from inception to July 2010. Study selection Using a keyword search, we evaluated English-language PIU studies with populations of US adolescents and college students. Main outcome measures Using a quality review tool based on the STROBE statement, two reviewers independently extracted data items including study setting, subject population, instrument used and reported prevalence. Results Search results yielded 658 manuscripts. We identified 18 research studies that met inclusion criteria. Quality assessment of studies ranged between 14 and 29 total points out of a possible 42 points, the average score was 23 (SD 5.1). Among these 18 studies, 8 reported prevalence estimates of US college student PIU, prevalence rates ranged from 0 to 26.3%. An additional 10 studies did not report prevalence. Conclusion The evaluation of PIU remains incomplete and is hampered by methodological inconsistencies. The wide range of conceptual approaches may have impacted the reported prevalence rates. Despite the newness of this area of study, most studies in our review were published over 3 years ago. Opportunities exist to pursue future studies adhering to recognized quality guidelines, as well as applying consistency in theoretical approach and validated instruments. PMID:21536950

Prevalence of pathological internet use among adolescents in Europe: demographic and social factors.

PubMed

Durkee, Tony; Kaess, Michael; Carli, Vladimir; Parzer, Peter; Wasserman, Camilla; Floderus, Birgitta; Apter, Alan; Balazs, Judit; Barzilay, Shira; Bobes, Julio; Brunner, Romuald; Corcoran, Paul; Cosman, Doina; Cotter, Padraig; Despalins, Romain; Graber, Nadja; Guillemin, Francis; Haring, Christian; Kahn, Jean-Pierre; Mandelli, Laura; Marusic, Dragan; Mészáros, Gergely; Musa, George J; Postuvan, Vita; Resch, Franz; Saiz, Pilar A; Sisask, Merike; Varnik, Airi; Sarchiapone, Marco; Hoven, Christina W; Wasserman, Danuta

2012-12-01

To investigate the prevalence of pathological internet use (PIU) and maladaptive internet use (MIU) among adolescents in 11 European countries in relation to demographic, social factors and internet accessibility. Cross-sectional survey. The 7th Framework European Union (EU) funded project, Saving and Empowering Young Lives in Europe (SEYLE), is a randomized controlled trial (RCT) evaluating interventions for risk behaviours among adolescents in Austria, Estonia, France, Germany, Hungary, Ireland, Israel, Italy, Romania, Slovenia and Spain, with Sweden serving as the coordinating centre. A total of 11 956 adolescents (female/male: 6731/5225; mean age: 14.9 ± 0.89) recruited from randomly selected schools within the 11 study sites. Internet users were classified by gender into three categories: adaptive, maladaptive and pathological, based on their score in the Young Diagnostic Questionnaire for Internet Addiction (YDQ). The overall prevalence of PIU was 4.4%; it was higher among males than females (5.2% versus 3.8%) and differed between countries (χ(2)  = 309.98; d.f. = 20; P < 0.001). PIU correlated significantly with mean hours online and male gender. The highest-ranked online activities were watching videos, frequenting chatrooms and social networking; significantly higher rates of playing single-user games were found in males and social networking in females. Living in metropolitan areas was associated with PIU. Students not living with a biological parent, low parental involvement and parental unemployment showed the highest relative risks of both MIU and PIU. Across a range of countries in Europe, using the Young Diagnostic Questionnaire for Internet Addiction yields a prevalence of 'pathological internet use' of 4.4% among adolescents, but varies by country and gender; adolescents lacking emotional and psychological support are at highest risk. © 2012 The Authors, Addiction © 2012 Society for the Study of Addiction.

Cost-effective flow-through nanohole array-based biosensing platform for the label-free detection of uropathogenic E. coli in real time.

PubMed

Gomez-Cruz, Juan; Nair, Srijit; Manjarrez-Hernandez, Angel; Gavilanes-Parra, Sandra; Ascanio, Gabriel; Escobedo, Carlos

2018-05-30

Rapid, inexpensive and sensitive detection of uropathogenic Escherichia coli (UPEC), a common cause of ascending urinary tract infections (UTIs) including cystitis and pyelonephritis, is critical given the increasing number of cases and its recurrence worldwide. In this paper, we present a label-free nanoplasmonic sensing platform, built with off-the-shelf optical and electronic components, which can detect intact UPEC at concentrations lower than the physiological limit for UTI diagnosis, in real time. The sensing platform consists of a red LED light source, lens assembly, CMOS detector, Raspberry Pi interface in conjugation with a metallic flow-through nanohole array-based sensor. Detection is achieved exploiting nanoplasmonic phenomena from the nanohole arrays through surface plasmon resonance imaging (SPRi) technique. The platform has a bulk sensitivity of 212 pixel intensity unit (PIU)/refractive index unit (RIU), and a resolution in the order of 10 -6 RIU. We demonstrate capture and detection of UPEC with a detection limit of ~100 CFU/ml - a concentration well below the threshold limit for UTI diagnosis in clinical samples. We also demonstrate detection of UPEC in spiked human urine samples for two different concentrations of bacteria. This work is particularly relevant for point-of-care applications, especially for regions around the world where accessibility to medical facilities is heavily dependent upon economy, and availability. Copyright © 2018 Elsevier B.V. All rights reserved.

An Exploratory Examination of At-Risk/Problematic Internet Use and Disordered Eating in Adults

PubMed Central

Ivezaj, Valentina; Potenza, Marc N.; Grilo, Carlos M.; White, Marney A.

2016-01-01

This is a PDF file of an unedited manuscript that has been accepted for publication. As a service to our customers we are providing this early version of the manuscript. The manuscript will undergo copyediting, typesetting, and review of the resulting proof before it is published in its final citable form. Please note that during the production process errors may be discovered which could affect the content, and all legal disclaimers that apply to the journal pertain. Purpose At-risk/problematic Internet use (ARPIU) has been associated with impairment in multiple domains including psychopathology. The present study examined the relationship between ARPIU and disordered eating in a large community sample. Methods Participants (n=1000) completed an online survey about health behaviors. Two thresholds of ARPIU and disordered eating each were examined. Results The ARPIU and Sub-ED (subthreshold eating disorders) groups reported greater depressive symptoms and poorer self-control than the Control group; the Sub-ED group reported greater impulsivity than the Control group. The ARPIU and Sub-ED groups significantly differed in key features related to each condition. Finally, the co-occurrence of ARPIU and Sub-ED was associated with greater depression. In the second set of analyses based on more stringent thresholds, the Problematic Internet Use (PIU) and ED groups differed on all measures compared to the Control group. The PIU and ED groups also differed on key features related to each condition, but did not differ on measures of impulsivity or self-control. The co-occurrence of PIU and ED was associated with greater depressive symptoms than either PIU or ED independently. Conclusions ARPIU and Sub-ED share links to depression and poor self-control and these may represent possible therapeutic targets across Internet-use and disordered-eating behaviors. Co-occurring PIU and ED at either lenient or stringent thresholds is associated with greater depression. Future studies should examine the temporal nature of these associations and the extent to which targeting depression, Internet use, or disordered eating may lead to improvements across domains. PMID:26725439

Chemical interference with iron transport systems to suppress bacterial growth of Streptococcus pneumoniae.

PubMed

Yang, Xiao-Yan; Sun, Bin; Zhang, Liang; Li, Nan; Han, Junlong; Zhang, Jing; Sun, Xuesong; He, Qing-Yu

2014-01-01

Iron is an essential nutrient for the growth of most bacteria. To obtain iron, bacteria have developed specific iron-transport systems located on the membrane surface to uptake iron and iron complexes such as ferrichrome. Interference with the iron-acquisition systems should be therefore an efficient strategy to suppress bacterial growth and infection. Based on the chemical similarity of iron and ruthenium, we used a Ru(II) complex R-825 to compete with ferrichrome for the ferrichrome-transport pathway in Streptococcus pneumoniae. R-825 inhibited the bacterial growth of S. pneumoniae and stimulated the expression of PiuA, the iron-binding protein in the ferrichrome-uptake system on the cell surface. R-825 treatment decreased the cellular content of iron, accompanying with the increase of Ru(II) level in the bacterium. When the piuA gene (SPD_0915) was deleted in the bacterium, the mutant strain became resistant to R-825 treatment, with decreased content of Ru(II). Addition of ferrichrome can rescue the bacterial growth that was suppressed by R-825. Fluorescence spectral quenching showed that R-825 can bind with PiuA in a similar pattern to the ferrichrome-PiuA interaction in vitro. These observations demonstrated that Ru(II) complex R-825 can compete with ferrichrome for the ferrichrome-transport system to enter S. pneumoniae, reduce the cellular iron supply, and thus suppress the bacterial growth. This finding suggests a novel antimicrobial approach by interfering with iron-uptake pathways, which is different from the mechanisms used by current antibiotics.

Relationship between Problematic Internet Use and Post-Traumatic Stress Disorder Symptoms among Students Following the Sewol Ferry Disaster in South Korea

PubMed Central

Lee, Ju-Yeon; Kang, Hee-Ju; Kim, Seon-Young; Bae, Kyung-Yeol; Kim, Jae-Min; Shin, Il-Seon; Yoon, Jin-Sang

2017-01-01

We investigated the association between problematic internet use (PIU) and post-traumatic stress disorder (PTSD) symptoms in children and adolescents in South Korea. A cross-sectional survey was administered to community students who attended primary, secondary, and high schools in the Jindo area 1–2.5 months after the Sewol ferry disaster. Of the 1,744 respondents, 392 students who were exposed to the disaster, witnessing the rescue work directly, were evaluated. PTSD symptoms were measured using the University of California Los Angeles Post-traumatic Stress Disorder Reaction Index (UCLA PTSD-RI). The severity of impairment caused by excessive internet use was evaluated using Young's Internet Addiction Test. The Center for Epidemiological Studies Depression Scale (CES-D) and State Anxiety Inventory for Children (SAIC) were also used. Logistic regression analysis revealed that PIU was significantly and independently associated with a high level of PTSD symptoms. Our findings suggest that children and adolescents with PIU require intensive follow-up and special care to prevent the development of PTSD symptoms following a disaster. PMID:29209393

Relationship between Problematic Internet Use and Post-Traumatic Stress Disorder Symptoms among Students Following the Sewol Ferry Disaster in South Korea.

PubMed

Lee, Ju-Yeon; Kim, Sung-Wan; Kang, Hee-Ju; Kim, Seon-Young; Bae, Kyung-Yeol; Kim, Jae-Min; Shin, Il-Seon; Yoon, Jin-Sang

2017-11-01

We investigated the association between problematic internet use (PIU) and post-traumatic stress disorder (PTSD) symptoms in children and adolescents in South Korea. A cross-sectional survey was administered to community students who attended primary, secondary, and high schools in the Jindo area 1-2.5 months after the Sewol ferry disaster. Of the 1,744 respondents, 392 students who were exposed to the disaster, witnessing the rescue work directly, were evaluated. PTSD symptoms were measured using the University of California Los Angeles Post-traumatic Stress Disorder Reaction Index (UCLA PTSD-RI). The severity of impairment caused by excessive internet use was evaluated using Young's Internet Addiction Test. The Center for Epidemiological Studies Depression Scale (CES-D) and State Anxiety Inventory for Children (SAIC) were also used. Logistic regression analysis revealed that PIU was significantly and independently associated with a high level of PTSD symptoms. Our findings suggest that children and adolescents with PIU require intensive follow-up and special care to prevent the development of PTSD symptoms following a disaster.

Facebook Role Play Addiction - A Comorbidity with Multiple Compulsive-Impulsive Spectrum Disorders.

PubMed

Nathan, Deeepa; Shukla, Lekhansh; Kandasamy, Arun; Benegal, Vivek

2016-06-01

Background Problematic Internet use (PIU) is an emerging entity with varied contents. Behavioral addictions have high comorbidity of attention deficit hyperactivity disorder and obsessive-compulsive spectrum disorders. Social networking site (SNS) addiction and role playing game (RPG) addiction are traditionally studied as separate entities. We present a case with excessive Internet use, with a particular focus on phenomenology and psychiatric comorbidities. Case presentation Fifteen-year-old girl with childhood onset attention deficit disorder, obsessive-compulsive disorder, adolescent onset trichotillomania, and disturbed family environment presented with excessive Facebook use. Main online activity was creating profiles in names of mainstream fictional characters and assuming their identity (background, linguistic attributes, etc.). This was a group activity with significant socialization in the virtual world. Craving, salience, withdrawal, mood modification, and conflict were clearly elucidated and significant social and occupational dysfunction was evident. Discussion This case highlights various vulnerability and sociofamilial factors contributing to behavioral addiction. It also highlights the presence of untreated comorbidities in such cases. The difference from contemporary RPGs and uniqueness of role playing on SNS is discussed. SNS role playing as a separate genre of PIU and its potential to reach epidemic proportions are discussed. Conclusions Individuals with temperamental vulnerability are likely to develop behavioral addictions. Identification and management of comorbid conditions are important. The content of PIU continues to evolve and needs further study.

Physiological markers of biased decision-making in problematic Internet users.

PubMed

Nikolaidou, Maria; Fraser, Danaë Stanton; Hinvest, Neal

2016-09-01

Background and aims Addiction has been reliably associated with biased emotional reactions to risky choices. Problematic Internet use (PIU) is a relatively new concept and its classification as an addiction is debated. Implicit emotional responses were measured in individuals expressing nonproblematic and problematic Internet behaviors while they made risky/ambiguous decisions to explore whether they showed similar responses to those found in agreed-upon addictions. Methods The design of the study was cross sectional. Participants were adult Internet users (N = 72). All testing took place in the Psychophysics Laboratory at the University of Bath, UK. Participants were given the Iowa Gambling Task (IGT) which provides an index of an individual's ability to process and learn probabilities of reward and loss. Integration of emotions into current decision-making frameworks is vital for optimal performance on the IGT and thus, skin conductance responses (SCRs) to reward, punishment, and in anticipation of both were measured to assess emotional function. Results Performance on the IGT did not differ between the groups of Internet users. However, problematic Internet users expressed increased sensitivity to punishment as revealed by stronger SCRs to trials with higher punishment magnitude. Discussion and conclusions PIU seems to differ on behavioral and physiological levels with other addictions. However, our data imply that problematic Internet users were more risk-sensitive, which is a suggestion that needs to be incorporated into in any measure and, potentially, any intervention for PIU.

Facebook Role Play Addiction – A Comorbidity with Multiple Compulsive–Impulsive Spectrum Disorders

PubMed Central

Nathan, Deeepa; Shukla, Lekhansh; Kandasamy, Arun; Benegal, Vivek

2016-01-01

Background Problematic Internet use (PIU) is an emerging entity with varied contents. Behavioral addictions have high comorbidity of attention deficit hyperactivity disorder and obsessive–compulsive spectrum disorders. Social networking site (SNS) addiction and role playing game (RPG) addiction are traditionally studied as separate entities. We present a case with excessive Internet use, with a particular focus on phenomenology and psychiatric comorbidities. Case presentation Fifteen-year-old girl with childhood onset attention deficit disorder, obsessive–compulsive disorder, adolescent onset trichotillomania, and disturbed family environment presented with excessive Facebook use. Main online activity was creating profiles in names of mainstream fictional characters and assuming their identity (background, linguistic attributes, etc.). This was a group activity with significant socialization in the virtual world. Craving, salience, withdrawal, mood modification, and conflict were clearly elucidated and significant social and occupational dysfunction was evident. Discussion This case highlights various vulnerability and sociofamilial factors contributing to behavioral addiction. It also highlights the presence of untreated comorbidities in such cases. The difference from contemporary RPGs and uniqueness of role playing on SNS is discussed. SNS role playing as a separate genre of PIU and its potential to reach epidemic proportions are discussed. Conclusions Individuals with temperamental vulnerability are likely to develop behavioral addictions. Identification and management of comorbid conditions are important. The content of PIU continues to evolve and needs further study. PMID:27156380

Rate coefficients for the reactions of C2(a(3)Pi(u)) and C2(X(1)Sigma(g)(+)) with various hydrocarbons (CH4, C2H2, C2H4, C2H6, and C3H8): a gas-phase experimental study over the temperature range 24-300 K.

PubMed

Páramo, Alejandra; Canosa, André; Le Picard, Sébastien D; Sims, Ian R

2008-10-02

The kinetics of reactions of C2(a(3)Pi(u)) and C2(X(1)Sigma(g)(+)) with various hydrocarbons (CH4, C2H2, C2H4, C2H6, and C3H8) have been studied in a uniform supersonic flow expansion over the temperature range 24-300 K. Rate coefficients have been obtained by using the pulsed laser photolysis-laser induced fluorescence technique, where both radicals were produced at the same time but detected separately. The reactivity of the triplet state was found to be significantly lower than that of the singlet ground state for all reactants over the whole temperature range of the study. Whereas C2(X(1)Sigma(g)(+)) reacts with a rate coefficient close to the gas kinetic limit with all hydrocarbons studied apart from CH4, C2(a(3)Pi(u)) appears to be more sensitive to the molecular and electronic structure of the reactant partners. The latter reacts at least one order of magnitude faster with unsaturated hydrocarbons than with alkanes, and the rate coefficients increase very significantly with the size of the alkane. Results are briefly discussed in terms of their potential astrophysical impact.

Physiological markers of biased decision-making in problematic Internet users

PubMed Central

Nikolaidou, Maria; Fraser, Danaë Stanton

2016-01-01

Background and aims Addiction has been reliably associated with biased emotional reactions to risky choices. Problematic Internet use (PIU) is a relatively new concept and its classification as an addiction is debated. Implicit emotional responses were measured in individuals expressing nonproblematic and problematic Internet behaviors while they made risky/ambiguous decisions to explore whether they showed similar responses to those found in agreed-upon addictions. Methods The design of the study was cross sectional. Participants were adult Internet users (N = 72). All testing took place in the Psychophysics Laboratory at the University of Bath, UK. Participants were given the Iowa Gambling Task (IGT) which provides an index of an individual’s ability to process and learn probabilities of reward and loss. Integration of emotions into current decision-making frameworks is vital for optimal performance on the IGT and thus, skin conductance responses (SCRs) to reward, punishment, and in anticipation of both were measured to assess emotional function. Results Performance on the IGT did not differ between the groups of Internet users. However, problematic Internet users expressed increased sensitivity to punishment as revealed by stronger SCRs to trials with higher punishment magnitude. Discussion and conclusions PIU seems to differ on behavioral and physiological levels with other addictions. However, our data imply that problematic Internet users were more risk-sensitive, which is a suggestion that needs to be incorporated into in any measure and, potentially, any intervention for PIU. PMID:27554505

Does acceptance of power distance influence propensities for problematic Internet use? Evidence from a cross-cultural study.

PubMed

Montag, Christian; Duke, Éilish; Sha, Peng; Zhou, Min; Sindermann, Cornelia; Li, Mei

2016-12-01

Several studies suggest that Asian countries are particularly afflicted by problematic Internet use (PIU). The present study investigates whether individual differences in the acceptance of power distance can be linked to overuse of the Internet in Germany and in China. Power distance has been discussed as an essential dimension on which Asian and Western societies differ. In the present study, we investigate two large non-clinical samples from Germany (n = 297) and China (n = 556) to address this question. Both in Germany and in China, high acceptance of power distance was positively associated with PIU. These effects were more pronounced in China compared with Germany. Moreover, the observed effects were stronger in males compared with females. Clearly, these findings are just a starting point and need to be replicated in the future. Clinical populations and a further important difference variable - collectivism - also merit consideration in future work. © 2015 Wiley Publishing Asia Pty Ltd.

Problematic Internet Use among Turkish University Students: A Multidimensional Investigation Based on Demographics and Internet Activities

ERIC Educational Resources Information Center

Tekinarslan, Erkan; Gurer, Melih Derya

2011-01-01

This study investigated the Turkish undergraduate university students' problematic Internet use (PIU) levels on different dimensions based on demographics (e.g., gender, Internet use by time of day), and Internet activities (e.g., chat, entertainment, social networking, information searching, etc.). Moreover, the study explored some predictors of…

Features and Predictors of Problematic Internet Use in Chinese College Students

ERIC Educational Resources Information Center

Huang, R. L.; Lu, Z.; Liu, J. J.; You, Y. M.; Pan, Z. Q.; Wei, Z.; He, Q.; Wang, Z. Z.

2009-01-01

This study was set to investigate the prevalence of problematic internet use (PIU) among college students and the possible factors related to this disorder. About 4400 college students, ranging from freshmen to juniors, from eight different universities in Wuhan, China were surveyed. Young's Diagnostic Questionnaire for Internet Addiction (YDQ)…

WE-G-18C-05: Characterization of Cross-Vendor, Cross-Field Strength MR Image Intensity Variations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paulson, E; Prah, D

2014-06-15

Purpose: Variations in MR image intensity and image intensity nonuniformity (IINU) can challenge the accuracy of intensity-based image segmentation and registration algorithms commonly applied in radiotherapy. The goal of this work was to characterize MR image intensity variations across scanner vendors and field strengths commonly used in radiotherapy. Methods: ACR-MRI phantom images were acquired at 1.5T and 3.0T on GE (450w and 750, 23.1), Siemens (Espree and Verio, VB17B), and Philips (Ingenia, 4.1.3) scanners using commercial spin-echo sequences with matched parameters (TE/TR: 20/500 ms, rBW: 62.5 kHz, TH/skip: 5/5mm). Two radiofrequency (RF) coil combinations were used for each scanner: bodymore » coil alone, and combined body and phased-array head coils. Vendorspecific B1- corrections (PURE/Pre-Scan Normalize/CLEAR) were applied in all head coil cases. Images were transferred offline, corrected for IINU using the MNI N3 algorithm, and normalized. Coefficients of variation (CV=σ/μ) and peak image uniformity (PIU = 1−(Smax−Smin)/(Smax+Smin)) estimates were calculated for one homogeneous phantom slice. Kruskal-Wallis and Wilcoxon matched-pairs tests compared mean MR signal intensities and differences between original and N3 image CV and PIU. Results: Wide variations in both MR image intensity and IINU were observed across scanner vendors, field strengths, and RF coil configurations. Applying the MNI N3 correction for IINU resulted in significant improvements in both CV and PIU (p=0.0115, p=0.0235). However, wide variations in overall image intensity persisted, requiring image normalization to improve consistency across vendors, field strengths, and RF coils. These results indicate that B1- correction routines alone may be insufficient in compensating for IINU and image scaling, warranting additional corrections prior to use of MR images in radiotherapy. Conclusions: MR image intensities and IINU vary as a function of scanner vendor, field strength, and RF coil configuration. A two-step strategy consisting of MNI N3 correction followed by normalization was required to improve MR image consistency. Funding provided by Advancing a Healthier Wisconsin.« less

Problematic internet use in childhood and youth: evolution of a 21st century affliction.

PubMed

Tam, Philip; Walter, Garry

2013-12-01

To describe the emergence of, and myriad issues pertaining to, problematic internet use in childhood and youth. In this overview and appraisal of a uniquely 21st century affliction, the focus is on youth and less on young adult perspectives. We employed relevant literature-search methodology though EMBASE, Psychinfo and Web of Science, utilising the key terms of PIU, internet addiction and youth mental health, and present a selection of the pioneering and important research developments both nationally and internationally. We focused on the literature from the past 10 years, but we also included relevant early developments in the field going back to the 1990s. We also made reference, where appropriate, to major considerations of relevance to the general public, where these were reported in reputable international news and media organisations. The authors utilised common internet search engines to access these news reports. It was found that the complex, novel and at times controversial concept of 'problematic internet use' (PIU)--often popularly dubbed 'internet addiction'--has attracted much public, media and research interest, particularly over the past decade. In common with many other afflictions that have a prominent 'pop-cultural' component, often the commentary and debate has been polarising, unclear and sensationalist. At times, more light than heat appears to be generated.

Single dose parenteral hyposensitization to poison ivy urushiol in guinea pigs.

PubMed

Walker, L A; Watson, E S; elSohly, M A

1995-08-01

Studies were carried out in guinea pigs to evaluate the potential for single dose hyposensitization to poison ivy urushiol dermatitis. Sensitization was induced by topical application of 1 mg of poison ivy urushiol to the back of the neck. In the first series of studies, three different analogs of poison ivy urushiol were studied: 1) a mixture of pentadecyl and heptadecyl catechols (PDC/HDC), the saturated side chain analog of the natural urushiol mixture; 2) a mixture of the diacetate esters of PDC and HDC (PDC/HDC Ac), the esterified form of the saturated sidechain analogs; 3) 2-n-pentadecyl hydroquinone diacetate (HQ Ac). Each of these compounds was administered as 5 mg of the free catechol i.m. each week for three weeks. A vehicle group received only corn oil injections. Reactivity to poison ivy urushiol (PIU) challenge was evaluated in skin tests at 1 and 5 weeks post-treatment. PDC/HDC Ac induced a marked reduction in both the incidence and the severity of lesions induced by PIU at both 1 and at 5 weeks post-treatment. Other analogs were ineffective at 5 weeks post-treatment, and were less effective than PDC/HDC Ac at 1 week post-treatment. In a second series of experiments, the efficacy of PDC/HDC Ac was evaluated in both single and multiple dose regiments. One treatment group received 5 mg of PDC/HDC Ac intramuscularly each week for 4 weeks, while another treatment group received a single dose of 20 mg PDC/HDC Ac i.m. Corresponding vehicle control groups were also included. At 1 week post-treatment in the single dose group, the PDC/HDC Ac was only modestly effective, with some reduction of severity of lesions at the higher challenge doses of PIU. However, at 4 and 7 weeks post-treatment, both the incidence and the severity of the lesions at all challenge doses were reduced. In the multiple dose group, the incidence and severity of lesions are reduced at 1 week and 4 weeks post-treatment (4 weeks and 7 weeks after the initial dose) but were not significantly different from the single dose group. These findings indicate that the diacetate ester of PDC/HDC is an effective hyposensitizer to poison ivy urushiol, and that this hyposensitization can be reasonably accomplished in a single dose treatment regimen.

CUSat: An End-to-End In-Orbit Inspection System University Nanosatellite Program

DTIC Science & Technology

2007-01-01

Sun07 210.7 .7/1217 $I GN/C Cbd olin W F.4170N COMWWt. 2-4/ r,,. 7 F".,7 03 0-.4. 1"..,o 000-v. 1040 4". Sun 10 VISI Thu&/0 54 Gnium .;p-iu loo...HMdoe. arevre ... ".zRV AFi gurep - Detailed Pg Schedule Exmpl COn adton totaknJciniemeyta ebradusse,aHwrem Stts hrtws loeelpd Thc aLnd Ja p r of tu

Relationships between Behavioural Addictions and Psychiatric Disorders: What Is Known and What Is Yet to Be Learned?

PubMed Central

Starcevic, Vladan; Khazaal, Yasser

2017-01-01

This article provides a narrative review of the relationships between several behavioural addictions [pathological gambling, problematic Internet use (PIU), problematic online gaming, compulsive sexual behaviour disorder, compulsive buying, and exercise addiction] and psychiatric disorders. Associations between most behavioural addictions and depressive and anxiety disorders are strong and seem relatively non-specific. Strong links with substance use disorders may support the notion that some people are more prone to addictive behaviours, regardless of whether these involve substances or problematic activities. Other associations seem relatively specific, for example, those between PIU/online gaming and attention-deficit/hyperactivity disorder, between compulsive buying on the one hand and eating disorders and hoarding on the other hand and between exercise addiction and eating disorders. The quality of the research varies, but most studies suffer from methodological limitations, including a cross-sectional or correlational design, non-representative study populations, small sample sizes, reliance on self-report assessment instruments, diverse diagnostic criteria, and conceptual heterogeneity of most behavioural addictions. Due to these limitations, generalisability of the findings is questionable and the direction of causality, if any, is unknown in the relationships between behavioural addictions and psychiatric disorders. Regardless of the aetiological uncertainty, these relationships often call for a modified treatment approach. Prospective studies are needed to clarify the longitudinal relationships between behavioural addictions and psychiatric disorders. PMID:28439243

Relationships between Behavioural Addictions and Psychiatric Disorders: What Is Known and What Is Yet to Be Learned?

PubMed

Starcevic, Vladan; Khazaal, Yasser

2017-01-01

This article provides a narrative review of the relationships between several behavioural addictions [pathological gambling, problematic Internet use (PIU), problematic online gaming, compulsive sexual behaviour disorder, compulsive buying, and exercise addiction] and psychiatric disorders. Associations between most behavioural addictions and depressive and anxiety disorders are strong and seem relatively non-specific. Strong links with substance use disorders may support the notion that some people are more prone to addictive behaviours, regardless of whether these involve substances or problematic activities. Other associations seem relatively specific, for example, those between PIU/online gaming and attention-deficit/hyperactivity disorder, between compulsive buying on the one hand and eating disorders and hoarding on the other hand and between exercise addiction and eating disorders. The quality of the research varies, but most studies suffer from methodological limitations, including a cross-sectional or correlational design, non-representative study populations, small sample sizes, reliance on self-report assessment instruments, diverse diagnostic criteria, and conceptual heterogeneity of most behavioural addictions. Due to these limitations, generalisability of the findings is questionable and the direction of causality, if any, is unknown in the relationships between behavioural addictions and psychiatric disorders. Regardless of the aetiological uncertainty, these relationships often call for a modified treatment approach. Prospective studies are needed to clarify the longitudinal relationships between behavioural addictions and psychiatric disorders.

NIC atomic operation unit with caching and bandwidth mitigation

DOEpatents

Hemmert, Karl Scott; Underwood, Keith D.; Levenhagen, Michael J.

2016-03-01

A network interface controller atomic operation unit and a network interface control method comprising, in an atomic operation unit of a network interface controller, using a write-through cache and employing a rate-limiting functional unit.

Spacelab interface development test, volume 1, sections 1-6

NASA Technical Reports Server (NTRS)

Harris, L. H.

1979-01-01

Data recorded during the following tests is presented: pulse coded modulator master unit to Spacelab (S/L) interface, master timing unit to S/L interface, multiplexer-demultiplexer/serial input-output to S/L interface, and special tests.

Analysis of the SA-N-1 GOA. The Most Common Missile on Soviet Ships (Analisi dell’ SA-N-1 GOA. Il piu’ Diffuso Missile Imbarcato della Marina Sovietica),

DTIC Science & Technology

1983-12-02

range system. Western observers /84 were surprised when a KOTLIN -Clas𔄁 destroyer, the BRAVYY, made a June 1962 deployment to the Baltic displaying a...experimental version, which was only confirmed five years later, when missiles began appearing on several KOTLIN -Class ships with similar modifications...most notable characteristic. On theseldestroyers the SA-N-I became a fully operational system of undisputed capability. In 1967 the remaining KOTLIN

Data management system CIU and DIU. Appendix A: CIU and DIU schematics

NASA Technical Reports Server (NTRS)

1975-01-01

The Computer Interface Unit (CIU) and the Data Interface Unit (DIU) of the Data Management System (DMS) were described as to their functional location, purpose and function. This describes the CIU and DIU at the unit level illustrating their interface thru the Data Bus (DBUS) and to other DMS units. All unit level interfaces are defined as to function and characteristics. The controls, indicators, test points and connectors are listed and function, location and application are described for each. The mechanical configuration is defined and illustrated to provide card and component location for modification or repair purposes. Unique disassembly and assembly requirements are outlined where applicable. A unit internal functional block diagram level description is provided.

The crew activity planning system bus interface unit

NASA Technical Reports Server (NTRS)

Allen, M. A.

1979-01-01

The hardware and software designs used to implement a high speed parallel communications interface to the MITRE 307.2 kilobit/second serial bus communications system are described. The primary topic is the development of the bus interface unit.

Interface For Fault-Tolerant Control System

NASA Technical Reports Server (NTRS)

Shaver, Charles; Williamson, Michael

1989-01-01

Interface unit and controller emulator developed for research on electronic helicopter-flight-control systems equipped with artificial intelligence. Interface unit interrupt-driven system designed to link microprocessor-based, quadruply-redundant, asynchronous, ultra-reliable, fault-tolerant control system (controller) with electronic servocontrol unit that controls set of hydraulic actuators. Receives digital feedforward messages from, and transmits digital feedback messages to, controller through differential signal lines or fiber-optic cables (thus far only differential signal lines have been used). Analog signals transmitted to and from servocontrol unit via coaxial cables.

Design and implementation of interface units for high speed fiber optics local area networks and broadband integrated services digital networks

NASA Technical Reports Server (NTRS)

Tobagi, Fouad A.; Dalgic, Ismail; Pang, Joseph

1990-01-01

The design and implementation of interface units for high speed Fiber Optic Local Area Networks and Broadband Integrated Services Digital Networks are discussed. During the last years, a number of network adapters that are designed to support high speed communications have emerged. This approach to the design of a high speed network interface unit was to implement package processing functions in hardware, using VLSI technology. The VLSI hardware implementation of a buffer management unit, which is required in such architectures, is described.

Orbiter multiplexer-demultiplexer (MDM)/Space Lab Bus Interface Unit (SL/BIU) serial data interface evaluation, volume 2

NASA Technical Reports Server (NTRS)

Tobey, G. L.

1978-01-01

Tests were performed to evaluate the operating characteristics of the interface between the Space Lab Bus Interface Unit (SL/BIU) and the Orbiter Multiplexer-Demultiplexer (MDM) serial data input-output (SIO) module. This volume contains the test equipment preparation procedures and a detailed description of the Nova/Input Output Processor Simulator (IOPS) software used during the data transfer tests to determine word error rates (WER).

Orbiter CIU/IUS communications hardware evaluation

NASA Technical Reports Server (NTRS)

Huth, G. K.

1979-01-01

The DOD and NASA inertial upper stage communication system design, hardware specifications and interfaces were analyzed to determine their compatibility with the Orbiter payload communications equipment (Payload Interrogator, Payload Signal Processors, Communications Interface Unit, and the Orbiter operational communications equipment (the S-Band and Ku-band systems). Topics covered include (1) IUS/shuttle Orbiter communications interface definition; (2) Orbiter avionics equipment serving the IUS; (3) IUS communication equipment; (4) IUS/shuttle Orbiter RF links; (5) STDN/TDRS S-band related activities; and (6) communication interface unit/Orbiter interface issues. A test requirement plan overview is included.

Electro-Optic Computing Architectures. Volume I

DTIC Science & Technology

1998-02-01

The objective of the Electro - Optic Computing Architecture (EOCA) program was to develop multi-function electro - optic interfaces and optical...interconnect units to enhance the performance of parallel processor systems and form the building blocks for future electro - optic computing architectures...Specifically, three multi-function interface modules were targeted for development - an Electro - Optic Interface (EOI), an Optical Interconnection Unit (OW

Design of efficient and simple interface testing equipment for opto-electric tracking system

NASA Astrophysics Data System (ADS)

Liu, Qiong; Deng, Chao; Tian, Jing; Mao, Yao

2016-10-01

Interface testing for opto-electric tracking system is one important work to assure system running performance, aiming to verify the design result of every electronic interface matching the communication protocols or not, by different levels. Opto-electric tracking system nowadays is more complicated, composed of many functional units. Usually, interface testing is executed between units manufactured completely, highly depending on unit design and manufacture progress as well as relative people. As a result, it always takes days or weeks, inefficiently. To solve the problem, this paper promotes an efficient and simple interface testing equipment for opto-electric tracking system, consisting of optional interface circuit card, processor and test program. The hardware cards provide matched hardware interface(s), easily offered from hardware engineer. Automatic code generation technique is imported, providing adaption to new communication protocols. Automatic acquiring items, automatic constructing code architecture and automatic encoding are used to form a new program quickly with adaption. After simple steps, a standard customized new interface testing equipment with matching test program and interface(s) is ready for a waiting-test system in minutes. The efficient and simple interface testing equipment for opto-electric tracking system has worked for many opto-electric tracking system to test entire or part interfaces, reducing test time from days to hours, greatly improving test efficiency, with high software quality and stability, without manual coding. Used as a common tool, the efficient and simple interface testing equipment for opto-electric tracking system promoted by this paper has changed traditional interface testing method and created much higher efficiency.

TMS communications software. Volume 2: Bus interface unit

NASA Technical Reports Server (NTRS)

Gregor, P. J.

1979-01-01

A data bus communication system to support the space shuttle's Trend Monitoring System (TMS) and to provide a basis for evaluation of the bus concept is described. Installation of the system included developing both hardware and software interfaces between the bus and the specific TMS computers and terminals. The software written for the microprocessor-based bus interface units is described. The software implements both the general bus communications protocol and also the specific interface protocols for the TMS computers and terminals.

Network interface unit design options performance analysis

NASA Technical Reports Server (NTRS)

Miller, Frank W.

1991-01-01

An analysis is presented of three design options for the Space Station Freedom (SSF) onboard Data Management System (DMS) Network Interface Unit (NIU). The NIU provides the interface from the Fiber Distributed Data Interface (FDDI) local area network (LAN) to the DMS processing elements. The FDDI LAN provides the primary means for command and control and low and medium rate telemetry data transfers on board the SSF. The results of this analysis provide the basis for the implementation of the NIU.

Flow-Control Unit For Nitrogen And Hydrogen Gases

NASA Technical Reports Server (NTRS)

Chang, B. J.; Novak, D. W.

1990-01-01

Gas-flow-control unit installed and removed as one piece replaces system that included nine separately serviced components. Unit controls and monitors flows of nitrogen and hydrogen gases. Designed for connection via fluid-interface manifold plate, reducing number of mechanical fluid-interface connections from 18 to 1. Unit provides increasing reliability, safety, and ease of maintenance, and for reducing weight, volume, and power consumption.

The work-family interface in the United States and Singapore: conflict across cultures.

PubMed

Galovan, Adam M; Fackrell, Tamara; Buswell, Lydia; Jones, Blake L; Hill, E Jeffrey; Carroll, Sarah June

2010-10-01

This article examines the work-family interface in a cross-cultural comparison between two nationally representative samples from the United States (n = 1,860) and Singapore (n = 1,035) with emphasis on work-family conflict. Family-to-work conflict was negatively related to marital satisfaction in both Singapore and the United States, although the effect was stronger in the United States. Similarly, family-to-work conflict was positively related to job satisfaction in the United States but was negatively related in Singapore. As expected, schedule flexibility was negatively related to depression in the United States, but in Singapore the relationship was positive. These findings suggest that theoretical relationships in the work-family interface developed in the more culturally individualistic West may need to be adapted when studying populations in the more collectivist East.

Electro-Optic Computing Architectures: Volume II. Components and System Design and Analysis

DTIC Science & Technology

1998-02-01

The objective of the Electro - Optic Computing Architecture (EOCA) program was to develop multi-function electro - optic interfaces and optical...interconnect units to enhance the performance of parallel processor systems and form the building blocks for future electro - optic computing architectures...Specifically, three multi-function interface modules were targeted for development - an Electro - Optic Interface (EOI), an Optical Interconnection Unit

Actuator digital interface unit (AIU). [control units for space shuttle data system

NASA Technical Reports Server (NTRS)

1973-01-01

Alternate versions of the actuator interface unit are presented. One alternate is a dual-failure immune configuration which feeds a look-and-switch dual-failure immune hydraulic system. The other alternate is a single-failure immune configuration which feeds a majority voting hydraulic system. Both systems communicate with the data bus through data terminals dedicated to each user subsystem. Both operational control data and configuration control information are processed in and out of the subsystem via the data terminal which yields the actuator interface subsystem, self-managing within its failure immunity capability.

Controllable Grid Interface Test System | Energy Systems Integration

Science.gov Websites

Facility | NREL Controllable Grid Interface Test System Controllable Grid Interface Test System NREL's controllable grid interface (CGI) test system can reduce certification testing time and costs grid interface is the first test facility in the United States that has fault simulation capabilities

Hardware interface for isolation of vibrations in flexible manipulators: Development and applications

NASA Technical Reports Server (NTRS)

Manouchehri, Davoud; Lindsay, Thomas; Ghosh, David

1994-01-01

NASA's Langley Research Center (LaRC) is addressing the problem of isolating the vibrations of the Shuttle remote manipulator system (RMS) from its end-effector and/or payload by modeling an RMS flat-floor simulator with a dynamic payload. Analysis of the model can lead to control techniques that will improve the speed, accuracy, and safety of the RMS in capturing satellites and eventually facilitate berthing with the space station. Rockwell International Corporation, also involved in vibration isolation, has developed a hardware interface unit to isolate the end-effector from the vibrations of an arm on a Shuttle robotic tile processing system (RTPS). To apply the RTPS isolation techniques to long-reach arms like the RMS, engineers have modeled the dynamics of the hardware interface unit with simulation software. By integrating the Rockwell interface model with the NASA LaRC RMS simulator model, investigators can study the use of a hardware interface to isolate dynamic payloads from the RMS. The interface unit uses both active and passive compliance and damping for vibration isolation. Thus equipped, the RMS could be used as a telemanipulator with control characteristics for capture and berthing operations. The hardware interface also has applications in industry.

Parallel Fin ORU Thermal Interface for space applications. [Orbital Replaceable Unit

NASA Technical Reports Server (NTRS)

Stobb, C. A.; Limardo, Jose G.

1992-01-01

The Parallel Fin Thermal Interface has been developed as an Orbital Replaceable Unit (ORU) interface. The interface transfers heat from an ORU baseplate to a Heat Acquisition Plate (HAP) through pairs of fins sandwiched between insert plates that press against the fins with uniform pressure. The insert plates are spread apart for ORU baseplate separation and replacement. Two prototype interfaces with different fin dimensions were built (Model 140 and 380). Interfacing surface samples were found to have roughnesses of 56 to 89 nm. Conductance values of 267 to 420 W/sq m C were obtained for the 140 model in vacuum with interface pressures of 131 to 262 kPa (19 to 38 psi). Vacuum conductances ranging from 176 to 267 W/sq m F were obtained for the 380 model at interface pressures of 97 to 152 kPa (14 and 22 psi). Correlations from several sources were found to agree with test data within 20 percent using thermal math models of the interfaces.

In Situ Infrared Spectroscopy of the Gaseous Species Present in a Diamond Chemical Vapor Deposition System

NASA Technical Reports Server (NTRS)

Morell, G.; Weiner, B. R.

1998-01-01

We interfaced a Hot-Filament Chemical Vapor Deposition (HFCVD) system to the emission port of an FT-IR spectrometer, in order to study the gas phase species present during the deposition of diamond thin films. The implementation of the infrared (IR) emission technique in situ allowed the study of various carbon-containing species believed to be crucial in diamond film growth. The two IR-active vibrational fundamentals of methane, v(3)(f2) and v(4)(f2), were observed at three different filament temperatures: 1000, 1500 and 2000 C. However, the net signal of v(3) was emission, while that of v(4) was absorption. These results indicate that the v(4) fundamental is excited beyond equilibrium, while the v(3) fundamental remains mostly in the ground state. This is due to the small concentration of methane, the low energy of v(4) compared to v(3) or to the Hz vibrational mode, and symmetry considerations that forbid interaction among the four fundamentals of methane. Thus, the excitation of v(3) is more likely than its decay under HFCVD conditions, producing a non-equilibrium population. At a filament temperature of 2000 C, the v(3) (sigma(+)(3)) fundamental of acetylene and a band at 1328 cm-l also ascribed to acetylene (v5 (pi(U)) + v4) appear in net absorption. This correlates well with the onset of molecular hydrogen breaking by the filament, which occurs at temperatures around 2000 C and above. The hydrogen atoms produced in this heterogeneous reaction give rise to a chain of reactions that lead to acetylene, among other carbonaceous species.

Aft flight deck documentation with freefloating headset interface unit (HIU)

NASA Image and Video Library

1983-09-05

STS008-18-479 (5 Sept 1983) --- Aft flight deck documentation includes on orbit station with control panel A2, aft viewing window W9, and communications kit assembly (ASSY) headset (HDST) interface unit (HIU) and cable free floating in front of it.

Recommendation on Transition from Primary/Secondary Radar to Secondary- Only Radar Capability

DTIC Science & Technology

1994-10-01

Radar Beacon Performance Monitor RCIU Remote Control Interface Unit RCL Remote Communications Link R E&D Research, Engineering and Development RML Radar...rate. 3.1.2.5 Maintenance The current LRRs have limited remote maintenance monitoring (RMM) capabilities via the Remote Control Interface Unit ( RCIU ...1, -2 and FPS-20 radars required an upgrade of some of the radar subsystems, namely the RCIU to respond as an RMS and the CD to interface with radar

Impact of Shutting Down En Route Primary Radars within CONUS Interior

DTIC Science & Technology

1993-06-01

Remote Control Interface Unit ( RCIU ) RMS software for the primary radar will be deleted. Any dependency of the secondary radar on the primary radar data...Generators RCIU Remote Control and Interface Unit RMM Remote Monitoring and Maintenance RMMS Remote Maintenance Monitoring System RMS Remote Maintenance

Microprocessor-based interface for oceanography

NASA Technical Reports Server (NTRS)

Hansen, G. R.

1979-01-01

Ocean floor imaging system incorporates five identical microprocessor-based interface units each assigned to specific sonar instrument to simplify system. Central control module based on same microprocessor eliminates need for custom tailoring hardware interfaces for each instrument.

MIL-STD-1553 dynamic bus controller/remote terminal hybrid set

NASA Astrophysics Data System (ADS)

Friedman, S. N.

This paper describes the performance, physical and electrical requirements of a Dual Redundant BUS Interface Unit (BIU) acting as a BUS Controller Interface Unit (BCIU) or Remote Terminal Unit (RTU) between a Motorola 68000 VME BUS and MIL-STD-1553B Multiplex Data Bus. A discussion of how the BIU Hybrid set is programmed, and operates as a BCIU or RTU, will be included. This paper will review Dynamic Bus Control and other Mode Code capabilities. The BIU Hybrid Set interfaces to a 68000 Microprocessor with a VME Bus using programmed I/O transfers. This special interface will be discussed along with the internal Dual Access Memory (4K x 16) used to support the data exchanges between the CPU and the BIU Hybrid Set. The hybrid set's physical size and power requirements will be covered. This includes the present Double Eurocard the BIU function is presently being offered on.

Onboard System Evaluation of Rotors Vibration, Engines (OBSERVE) monitoring System

DTIC Science & Technology

1992-07-01

consists of a Data Acquisiiton Unit (DAU), Control and Display Unit ( CADU ), Universal Tracking Devices (UTD), Remote Cockpit Display (RCD) and a PC...and Display Unit ( CADU ) - The CADU provides data storage and a graphical user interface neccesary to display both the measured data and diagnostic...information. The CADU has an interface to a Credit Card Memory (CCM) which operates similar to a disk drive, allowing the storage of data and programs. The

The FE/HE Interface: A UK Perspective. A Report to the CVCP. IES Report 316.

ERIC Educational Resources Information Center

Rawlinson, S.; And Others

The interface between further education (FE) and higher education (HE) in the United Kingdom was examined by analyzing information from the following sources: available literature; all United Kingdom (UK) data sources regarding student enrollment, funding, objectives, and modes of study; interviews with representatives of national bodies concerned…

Development of a Power Electronics Unit for the Space Station Plasma Contactor

NASA Technical Reports Server (NTRS)

Hamley, John A.; Hill, Gerald M.; Patterson, Michael J.; Saggio, Joseph, Jr.; Terdan, Fred; Mansell, Justin D.

1994-01-01

A hollow cathode plasma contactor has been baselined as a charge control device for the Space Station (SS) to prevent deleterious interactions of coated structural components with the ambient plasma. NASA LeRC Work Package 4 initiated the development of a plasma contactor system comprised of a Power Electronics Unit (PEU), an Expellant Management Unit (EMU), a command and data interface, and a Plasma Contactor Unit (PCU). A breadboard PEU was designed and fabricated. The breadboard PEU contains a cathode heater and discharge power supply, which were required to operate the PCU, a control and auxiliary power converter, an EMU interface, a command and telemetry interface, and a controller. The cathode heater and discharge supplies utilized a push-pull topology with a switching frequency of 20 kHz and pulse-width-modulated (PWM) control. A pulse ignition circuit derived from that used in arcjet power processors was incorporated in the discharge supply for discharge ignition. An 8088 based microcontroller was utilized in the breadboard model to provide a flexible platform for controller development with a simple command/data interface incorporating a direct connection to SS Mulitplexer/Demultiplexer (MDM) analog and digital I/O cards. Incorporating this in the flight model would eliminate the hardware and software overhead associated with a 1553 serial interface. The PEU autonomously operated the plasma contactor based on command inputs and was successfully integrated with a prototype plasma contactor unit demonstrating reliable ignition of the discharge and steady-state operation.

Weather information network including graphical display

NASA Technical Reports Server (NTRS)

Leger, Daniel R. (Inventor); Burdon, David (Inventor); Son, Robert S. (Inventor); Martin, Kevin D. (Inventor); Harrison, John (Inventor); Hughes, Keith R. (Inventor)

2006-01-01

An apparatus for providing weather information onboard an aircraft includes a processor unit and a graphical user interface. The processor unit processes weather information after it is received onboard the aircraft from a ground-based source, and the graphical user interface provides a graphical presentation of the weather information to a user onboard the aircraft. Preferably, the graphical user interface includes one or more user-selectable options for graphically displaying at least one of convection information, turbulence information, icing information, weather satellite information, SIGMET information, significant weather prognosis information, and winds aloft information.

An Advanced NSSS Integrity Monitoring System for Shin-Kori Nuclear Units 3 and 4

NASA Astrophysics Data System (ADS)

Oh, Yang Gyun; Galin, Scott R.; Lee, Sang Jeong

2010-12-01

The advanced design features of NSSS (Nuclear Steam Supply System) Integrity Monitoring System for Shin-Kori Nuclear Units 3 and 4 are summarized herein. During the overall system design and detailed component design processes, many design improvements have been made for the system. The major design changes are: 1) the application of a common software platform for all subsystems, 2) the implementation of remote access, control and monitoring capabilities, and 3) the equipment redesign and rearrangement that has simplified the system architecture. Changes give an effect on cabinet size, number of cables, cyber-security, graphic user interfaces, and interfaces with other monitoring systems. The system installation and operation for Shin-Kori Nuclear Units 3 and 4 will be more convenient than those for previous Korean nuclear units in view of its remote control capability, automated test functions, improved user interface functions, and much less cabling.

Distributed parallel messaging for multiprocessor systems

DOEpatents

Chen, Dong; Heidelberger, Philip; Salapura, Valentina; Senger, Robert M; Steinmacher-Burrow, Burhard; Sugawara, Yutaka

2013-06-04

A method and apparatus for distributed parallel messaging in a parallel computing system. The apparatus includes, at each node of a multiprocessor network, multiple injection messaging engine units and reception messaging engine units, each implementing a DMA engine and each supporting both multiple packet injection into and multiple reception from a network, in parallel. The reception side of the messaging unit (MU) includes a switch interface enabling writing of data of a packet received from the network to the memory system. The transmission side of the messaging unit, includes switch interface for reading from the memory system when injecting packets into the network.

Universal Controller for Spacecraft Mechanisms

NASA Technical Reports Server (NTRS)

Levanas, Greg; McCarthy, Thomas; Hunter, Don; Buchanan, Christine; Johnson, Michael; Cozy, Raymond; Morgan, Albert; Tran, Hung

2006-01-01

An electronic control unit has been fabricated and tested that can be replicated as a universal interface between the electronic infrastructure of a spacecraft and a brushless-motor (or other electromechanical actuator) driven mechanism that performs a specific mechanical function within the overall spacecraft system. The unit includes interfaces to a variety of spacecraft sensors, power outputs, and has selectable actuator control parameters making the assembly a mechanism controller. Several control topologies are selectable and reconfigurable at any time. This allows the same actuator to perform different functions during the mission life of the spacecraft. The unit includes complementary metal oxide/semiconductor electronic components on a circuit board of a type called rigid flex (signifying flexible printed wiring along with a rigid substrate). The rigid flex board is folded to make the unit fit into a housing on the back of a motor. The assembly has redundant critical interfaces, allowing the controller to perform time-critical operations when no human interface with the hardware is possible. The controller is designed to function over a wide temperature range without the need for thermal control, including withstanding significant thermal cycling, making it usable in nearly all environments that spacecraft or landers will endure. A prototype has withstood 1,500 thermal cycles between 120 and +85 C without significant deterioration of its packaging or electronic function. Because there is no need for thermal control and the unit is addressed through a serial bus interface, the cabling and other system hardware are substantially reduced in quantity and complexity, with corresponding reductions in overall spacecraft mass and cost.

Scalable SCPPM Decoder

NASA Technical Reports Server (NTRS)

Quir, Kevin J.; Gin, Jonathan W.; Nguyen, Danh H.; Nguyen, Huy; Nakashima, Michael A.; Moision, Bruce E.

2012-01-01

A decoder was developed that decodes a serial concatenated pulse position modulation (SCPPM) encoded information sequence. The decoder takes as input a sequence of four bit log-likelihood ratios (LLR) for each PPM slot in a codeword via a XAUI 10-Gb/s quad optical fiber interface. If the decoder is unavailable, it passes the LLRs on to the next decoder via a XAUI 10-Gb/s quad optical fiber interface. Otherwise, it decodes the sequence and outputs information bits through a 1-GB/s Ethernet UDP/IP (User Datagram Protocol/Internet Protocol) interface. The throughput for a single decoder unit is 150-Mb/s at an average of four decoding iterations; by connecting a number of decoder units in series, a decoding rate equal to that of the aggregate rate is achieved. The unit is controlled through a 1-GB/s Ethernet UDP/IP interface. This ground station decoder was developed to demonstrate a deep space optical communication link capability, and is unique in the scalable design to achieve real-time SCPP decoding at the aggregate data rate.

Interfacial Ferromagnetism and Exchange Bias in CaRuO3/CaMnO3 Superlattices

NASA Astrophysics Data System (ADS)

He, C.; Grutter, A. J.; Gu, M.; Browning, N. D.; Takamura, Y.; Kirby, B. J.; Borchers, J. A.; Kim, J. W.; Fitzsimmons, M. R.; Zhai, X.; Mehta, V. V.; Wong, F. J.; Suzuki, Y.

2012-11-01

We have found ferromagnetism in epitaxially grown superlattices of CaRuO3/CaMnO3 that arises in one unit cell at the interface. Scanning transmission electron microscopy and electron energy loss spectroscopy indicate that the difference in magnitude of the Mn valence states between the center of the CaMnO3 layer and the interface region is consistent with double exchange interaction among the Mn ions at the interface. Polarized neutron reflectivity and the CaMnO3 thickness dependence of the exchange bias field together indicate that the interfacial ferromagnetism is only limited to one unit cell of CaMnO3 at each interface. The interfacial moment alternates between the 1μB/interface Mn ion for even CaMnO3 layers and the 0.5μB/interface Mn ion for odd CaMnO3 layers. This modulation, combined with the exchange bias, suggests the presence of a modulating interlayer coupling between neighboring ferromagnetic interfaces via the antiferromagnetic CaMnO3 layers.

The 2010 wildland-urban interface of the conterminous United States

Treesearch

Sebasti& #237; n Martinuzzi; Susan I. Stewart; David P. Helmers; Miranda H. Mockrin; Roger B. Hammer; Volker C. Radeloff

2015-01-01

The wildland-urban interface (WUI) is the area where structures and other human development meet or intermingle with undeveloped wildland, and it is where wildfires have their greatest impacts on people. Hence the WUI is important for wildfire management. This document and associated maps summarize the extent of the WUI in the conterminous United States in 2010. The...

System Engineering and Integration Contract for Implementation of the National Airspace System Plan. Volume 2. Section 5.0 NAS Plan Project Findings.

DTIC Science & Technology

1984-08-01

and FPS-60 -’ vacuum-tube radars. There will be remote control interface units ( RCIU ) for tube-type radars, and an ARSR-3 relocation and RIH package...Facility RCE Remote Control Equipment; Radio Control Equipment RCIU Remote Control Interface Units RCO Remote Communications Outlet RDCC Research

Service equipment for use in hostile environments

NASA Technical Reports Server (NTRS)

Dolce, James L. (Inventor); Gordon, Andrew L. (Inventor)

1994-01-01

Service equipment for use in hostile environments includes a detachable service unit secured to a stationary service unit. The detachable service unit includes a housing with an exterior plate, a power control interface for connection to an exterior power source, locating pins located in said exterior plate, an electrical connector in the exterior plate electrically coupled to said power control interface, and a pair of clamping receptacles formed in the exterior plate and located on adjacent opposite edges of the exterior plate. The stationary unit includes an electrical connector for connection to the electrical connector of the detachable service unit, a clamping apparatus for clamping and unclamping the detachable service unit from the stationary unit, a base clamp assembly for mounting the clamping apparatus onto the stationary unit, and locating pin holes for receiving the locating pins and aligning the detachable service unit onto the stationary unit. The detachable service unit and stationary unit have mating scalloped faces which aid in alignment and provide a mechanism for heat dissipation.

The Distributed Common Ground System-Army User Interface

DTIC Science & Technology

2015-06-12

its perceived lack of effectiveness. Popular opinion of the DCGS-A user interface within the military is it is unfriendly to use and not intuitive...from members of the United States Congress due to its perceived lack of effectiveness. Popular opinion of the DCGS-A user interface within the

Developing an integrated system for mechanical reduction of fuel loads at the wildland/urban interface in the southern United States

Treesearch

John A. Stanturf; Robert Rummer; M. Wimberly; Timothy G. Rials; Philip. A. Araman; Rodney Busby; James Granskog; Leslie Groom

2003-01-01

Prescribed fire is used routinely in the southern United States to reduce fuel loading and decrease the risk of catastrophic wildfires, improve forest health, and manage threatened and endangered species. With rapid human population growth, southern forests have become fragmented by an extensive road network and intertwined with urban uses in a wildland-urban interface...

The wildland-urban interface in the United States

Treesearch

Susan I. Stewart; Volker C. Radeloff; Roger B. Hammer

2006-01-01

This paper presents a map of the wildland-urban interface (WUI) in 2000 for the lower 48 States of the United States. The WUI was extensive, covering 9 percent of the land area in the lower 48 States and encompassing 38 percent of all homes. Major WUI areas are located along the west coast, the Colorado Front Range, southeast Texas, the Great Lakes States, and across...

TMS communications hardware. Volume 2: Bus interface unit

NASA Technical Reports Server (NTRS)

Brown, J. S.; Hopkins, G. T.

1979-01-01

A prototype coaxial cable bus communication system used in the Trend Monitoring System to interconnect intelligent graphics terminals to a host minicomputer is described. The terminals and host are connected to the bus through a microprocessor-based RF modem termed a Bus Interface Unit (BIU). The BIU hardware and the Carrier Sense Multiple Access Listen-While-Talk protocol used on the network are described.

Hardware interface unit for control of shuttle RMS vibrations

NASA Technical Reports Server (NTRS)

Lindsay, Thomas S.; Hansen, Joseph M.; Manouchehri, Davoud; Forouhar, Kamran

1994-01-01

Vibration of the Shuttle Remote Manipulator System (RMS) increases the time for task completion and reduces task safety for manipulator-assisted operations. If the dynamics of the manipulator and the payload can be physically isolated, performance should improve. Rockwell has developed a self contained hardware unit which interfaces between a manipulator arm and payload. The End Point Control Unit (EPCU) is built and is being tested at Rockwell and at the Langley/Marshall Coupled, Multibody Spacecraft Control Research Facility in NASA's Marshall Space Flight Center in Huntsville, Alabama.

The bacterial sealing capacity of morse taper implant-abutment systems in vitro.

PubMed

Ranieri, Rogerio; Ferreira, Andreia; Souza, Emmanuel; Arcoverde, Joao; Dametto, Fabio; Gade-Neto, Cicero; Seabra, Flavio; Sarmento, Carlos

2015-05-01

The use of Morse taper systems in dental implantology has been associated widely with a more precise adaptation between implants and their respective abutments. This may lead to an increase in the stability of the implant system and may also prevent microbial invasion through the implant-abutment interface. The aim of this study was to investigate in vitro the ability of four commercially available Morse taper system units to impede bacterial penetration through their implant-abutment interfaces. Abutments were screwed onto the implants, and the units were subsequently immersed in Streptococcus sanguinis bacterial broth (1 × 10(8) colony forming units/mL) for 48 hours. The units were examined by scanning electron microscopy (SEM) under three conditions: 1) with the implant-abutment components assembled as units to investigate for both the existence of microgaps and the presence of bacteria; 2) with the implants and abutments separated for examination of internal surfaces; and 3) with the implant-abutment components again assembled as units to measure any microgaps detected. The mean size of the microgaps in each unit was determined by measuring, under SEM, their width in four equidistant points. Microgaps were detected in all units with no significant differences in dimension (Kruskal-Wallis test, P >0.05). Within all units, the presence of bacteria was also observed. The seals provided by the interfaces of the commercially available Morse taper implant-abutment units tested were not sufficiently small to shield the implant from bacterial penetration.

Bi-directional communication interface for microprocessor-to-system/370

NASA Technical Reports Server (NTRS)

Fischer, J. P.

1981-01-01

The design and operation of a bi-directional communication interface between a microcomputer and the IBM System/370 is documented. The hardware unit interconnects a modem to interface to the S/370, the microcomputer with an EIA I/O port, and a terminal for sending and receiving data from either the microcomputer or the S/370. Also described is the software necessary for the two-way interface. This interface is designed so that no modifications need to be made to the terminal, modem, or microcomputer.

Microgravity

NASA Image and Video Library

1995-10-20

Interface Configuration Experiment on the Second United States Microgravity Laboratory (USML-2). Over time the photos show a change in the shape of the interface between a liquid and a gas in a sealed, slightly asymmetrical container. Under the force of Earth's gravity, the interface would remain nearly flat, but in microgravity, the interface shape and location changes significantly in the container, resulting in major shifts of liquid arising from small asymmetries in the container shape.

Anatomical and morphogenetic analysis of seismoelectric conversion patterns at geological units

NASA Astrophysics Data System (ADS)

Kröger, B.; Kemna, A.

2012-04-01

Characterisation of the hydraulic properties of a reservoir, such as porosity and permeability, and their spatial distribution plays an important role in many subsurface geophysical investigations. A fully developed seismoelectric exploration method is very appealing since it would offer the potential to directly determine these parameters in field-scale applications. In fluid-saturated rocks, seismic waves can generate electromagnetic fields, due to electrokinetic coupling mechanisms at the fluid-mineral interface. Using numerical modelling, we investigated the spatio-temporal occurrence and evolution of the seismoelectric effects that occur in spatially confined lithological units. Such geometries may represent clay lenses embedded in an aquifer or petroleum deposits in a host rock. For the modelling, we use a simplified time-domain formulation of the coupled physical problem and its efficient implementation in a 2D finite-element framework. Two occurring seismoelectric phenomena are investigated: (1) the co-seismic field associated with the seismic displacement at each point and (2) the interface response generated at layer boundaries. To gain insight into the morphogenetic field behaviour of the seismoelectric effects, we run numerical simulations using several material parameter set-ups for various target geometries. Accordingly, we varied both the thickness of the confined units and the value of the electrical bulk conductivity in the considered media. The analysis of the seismoelectric effects revealed an important difference in the generation of the interface response at either electrically conductive or resistive units. We find that the contrast in the electrical bulk conductivity between the host rock and the target geological unit controls the shape and structure of the seismoelectric conversion patterns. Our results show that the seismoelectric interface response captures both the petrophysical and geometrical characteristics of the converting geological unit. The considered models indicate the general potential of using the seismoelectric interface response for reservoir characterisation in hydrogeological or hydrocarbon exploration studies.

Earth Observing System (EOS) Advanced Microwave Sounding Unit-A (AMSU-A): Instrumentation interface control document

NASA Technical Reports Server (NTRS)

1994-01-01

This Interface Control Document (ICD) defines the specific details of the complete accomodation information between the Earth Observing System (EOS) PM Spacecraft and the Advanced Microwave Sounding Unit (AMSU-A)Instrument. This is the first submittal of the ICN: it will be updated periodically throughout the life of the program. The next update is planned prior to Critical Design Review (CDR).

Data management system DIU test system

NASA Technical Reports Server (NTRS)

1976-01-01

An operational and functional description is given of the data management system. Descriptions are included for the test control unit, analog stimulus panel, discrete stimulus panel, and the precision source. The mechanical configuration is defined and illustrated to provide card and component location for modification or repair. The unit level interfaces are mirror images of the DIU interfaces and are described in the Final Technical Report for NASA-MSFC contract NAS8-29155.

The biomechanical behavior on the interface of tumor arthrosis/allograft prosthetic composite by finite element analysis

NASA Astrophysics Data System (ADS)

Chen, H. Z.; Jiang, W.; Zou, W.; Luo, J. M.; Chen, J. Y.; Tu, C. Q.; Xing, B. B.; Gu, Z. W.; Zhang, X. D.

2008-11-01

The biomechanical behavior of the uniting interface between the allograft bone and the autogenetic bone plays an important role in the treatment of the proximal femur massive defects with artificial tumor arthrosis/allograft prosthetic composite (TAAPC). According to the CT data of a patient, a 3D medical treatment model of TAAPC was established. Under the loads of 1.5 and 2.5 times standard body weight (70 kg), the mechanical behavior of the treatment model was analyzed by finite element analysis (FEA) for three typical healing periods. The results show that there are significant differences in the stress values and distribution in different healing periods. With healing of osteotomy, the hardness of the tissue of the uniting interface increases, the stress in uniting area was increased greatly and the stress concentration decreased. After cured the stress almost reached the level of normal bone. In the initial stage of healing, the healing training is not encouraged because there is an obvious risk of fracture of prosthesis and bone cement. In addition, porous hydroxyapatite (HA) ceramic used as bone tissue scaffold for this case, not only facilitates the generation of new bone, but also can avoid this risk caused by the non-uniting interface.

Joint Service Aircrew Mask (JSAM) - Strategic Aircraft (SA): Noise Attenuation Performance

DTIC Science & Technology

2015-08-25

Billy Swayne Ball Aerospace and Technologies Corp. Dayton, OH Hilary Gallagher Warfighter Interface Division Battlespace Acoustics Branch...DISTRIBUTION STATEMENT. //signed// //signed// Hilary Gallagher Robert C. McKinley Work Unit Manager Chief, Battlespace Acoustics Branch...Battlespace Acoustics Branch Warfighter Interface Division //signed// William E. Russell, Chief Warfighter Interface Division Human

Design of a microprocessor-based Control, Interface and Monitoring (CIM unit for turbine engine controls research

NASA Technical Reports Server (NTRS)

Delaat, J. C.; Soeder, J. F.

1983-01-01

High speed minicomputers were used in the past to implement advanced digital control algorithms for turbine engines. These minicomputers are typically large and expensive. It is desirable for a number of reasons to use microprocessor-based systems for future controls research. They are relatively compact, inexpensive, and are representative of the hardware that would be used for actual engine-mounted controls. The Control, Interface, and Monitoring Unit (CIM) contains a microprocessor-based controls computer, necessary interface hardware and a system to monitor while it is running an engine. It is presently being used to evaluate an advanced turbofan engine control algorithm.

A regenerative microchannel device for recording multiple single-unit action potentials in awake, ambulatory animals.

PubMed

Srinivasan, Akhil; Tipton, John; Tahilramani, Mayank; Kharbouch, Adel; Gaupp, Eric; Song, Chao; Venkataraman, Poornima; Falcone, Jessica; Lacour, Stéphanie P; Stanley, Garrett B; English, Arthur W; Bellamkonda, Ravi V

2016-02-01

Despite significant advances in robotics, commercially advanced prosthetics provide only a small fraction of the functionality of the amputated limb that they are meant to replace. Peripheral nerve interfacing could provide a rich controlling link between the body and these advanced prosthetics in order to increase their overall utility. Here, we report on the development of a fully integrated regenerative microchannel interface with 30 microelectrodes and signal extraction capabilities enabling evaluation in an awake and ambulatory rat animal model. In vitro functional testing validated the capability of the microelectrodes to record neural signals similar in size and nature to those that occur in vivo. In vitro dorsal root ganglia cultures revealed striking cytocompatibility of the microchannel interface. Finally, in vivo, the microchannel interface was successfully used to record a multitude of single-unit action potentials through 63% of the integrated microelectrodes at the early time point of 3 weeks. This marks a significant advance in microchannel interfacing, demonstrating the capability of microchannels to be used for peripheral nerve interfacing. © 2015 Federation of European Neuroscience Societies and John Wiley & Sons Ltd.

Method and apparatus for operating an improved thermocline storage unit

DOEpatents

Copeland, R.J.

1982-09-30

A method and apparatus for operating a thermocline storage unit in which an insulated barrier member is provided substantially at the interface region between the hot and cold liquids in the storage tank. The barrier member physically and thermally separates the hot and cold liquids substantially preventing any diffusing or mixing between them and substantially preventing any heat transfer there between. The barrier member follows the rise and fall of the interface region between the liquids as the tank is charged and discharged. Two methods of maintaining it in the interface region are disclosed. With the structure and operation of the present invention and in particular the significant reduction in diffusing or mixing between the hot and cold liquids as well as the significant reduction in the thermal heat transfer between them, the performance of the storage tank is improved. More specifically, the stability of the interface region or thermocline is enhanced and the thickness of the thermocline is reduced producing a corresponding increase in the steepness of the temperature gradient across the thermocline and a more efficiently operating thermocline storage unit.

Method and apparatus for operating an improved thermocline storage unit

DOEpatents

Copeland, Robert J.

1985-01-01

A method and apparatus for operating a thermocline storage unit in which an insulated barrier member is provided substantially at the interface region between the hot and cold liquids in the storage tank. The barrier member physically and thermally separates the hot and cold liquids substantially preventing any diffusing or mixing between them and substantially preventing any heat transfer therebetween. The barrier member follows the rise and fall of the interface region between the liquids as the tank is charged and discharged. Two methods of maintaining it in the interface region are disclosed. With the structure and operation of the present invention and in particular the significant reduction in diffusing or mixing between the hot and cold liquids as well as the significant reduction in the thermal heat transfer between them, the performance of the storage tank is improved. More specifically, the stability of the interface region or thermocline is enhanced and the thickness of the thermocline is reduced producing a corresponding increase in the steepness of the temperature gradient across the thermocline and a more efficiently operating thermocline storage unit.

Development of an interface for an ultrareliable fault-tolerant control system and an electronic servo-control unit

NASA Technical Reports Server (NTRS)

Shaver, Charles; Williamson, Michael

1986-01-01

The NASA Ames Research Center sponsors a research program for the investigation of Intelligent Flight Control Actuation systems. The use of artificial intelligence techniques in conjunction with algorithmic techniques for autonomous, decentralized fault management of flight-control actuation systems is explored under this program. The design, development, and operation of the interface for laboratory investigation of this program is documented. The interface, architecturally based on the Intel 8751 microcontroller, is an interrupt-driven system designed to receive a digital message from an ultrareliable fault-tolerant control system (UFTCS). The interface links the UFTCS to an electronic servo-control unit, which controls a set of hydraulic actuators. It was necessary to build a UFTCS emulator (also based on the Intel 8751) to provide signal sources for testing the equipment.

Test Program for Assessing Vulnerability of Industrial Equipment to Nuclear Air Blast.

DTIC Science & Technology

1983-10-01

PROJECT. TASK 4Scientific Servic, Inc. AREA & WORK UNIT NUMBERS 517 East Bayshore Work Unit 1124F Redwood City, CA 94063___ __________ 11. CONTROLLING ...vulnerability, but perhaps less expensive, to be selected and substituted, with an eye to cost control . 5. MODELING AND SCALING CONSIDERATIONS Reiterating...behavior and properties of the test items and Interfaces that control behavior (e4g., test objects/flow field, test objects/interfacing surface of

Portable Computer Technology (PCT) Research and Development Program Phase 2

NASA Technical Reports Server (NTRS)

Castillo, Michael; McGuire, Kenyon; Sorgi, Alan

1995-01-01

The subject of this project report, focused on: (1) Design and development of two Advanced Portable Workstation 2 (APW 2) units. These units incorporate advanced technology features such as a low power Pentium processor, a high resolution color display, National Television Standards Committee (NTSC) video handling capabilities, a Personal Computer Memory Card International Association (PCMCIA) interface, and Small Computer System Interface (SCSI) and ethernet interfaces. (2) Use these units to integrate and demonstrate advanced wireless network and portable video capabilities. (3) Qualification of the APW 2 systems for use in specific experiments aboard the Mir Space Station. A major objective of the PCT Phase 2 program was to help guide future choices in computing platforms and techniques for meeting National Aeronautics and Space Administration (NASA) mission objectives. The focus being on the development of optimal configurations of computing hardware, software applications, and network technologies for use on NASA missions.

ICC Type II large-format FPA detector assemblies

NASA Astrophysics Data System (ADS)

Clynne, Thomas H.; Powers, Thomas P.

1997-08-01

ICC presents a new addition to their integrated detector assembly product line with the announcement of their type II large format staring class FPA units. A result of internally funded research and development, the ICC type II detector assembly can accommodate all existing large format staring class PtSi, InSb and MCT focal planes, up to 640 by 480. Proprietary methodologies completely eliminate all FPA stresses to allow for maximum FPA survivability. Standard optical and cryocooler interfaces allow for the use of BEI, AEG, TI SADA Hughes/Magnavox and Joule Thompson coolers. This unit has been qualified to the current SADA II thermal environmental specifications and was tailored around ICC's worldwide industry standard type IV product. Assembled in a real world flexible manufacturing environment, this unit features a wide degree of adaptability and can be easily modified to a user's specifications via standard options and add-ons that include optical interfaces, electrical interfaces and window/filter material selections.

Performance Assessment of the Invisio V60 Tactical System with the X5 Dual In-Ear Headset

DTIC Science & Technology

2015-06-30

Gallagher Warfighter Interface Division Battlespace Acoustics Branch Wright-Patterson AFB, OH Melissa A. Theis Oak Ridge Institute for Science...Robert C. McKinley Work Unit Manager Chief, Battlespace Acoustics Branch Battlespace Acoustics Branch Warfighter Interface Division...Warfighter Interface Division Dayton, OH Battlespace Acoustics Branch Wright-Patterson AFB OH 45433 711

Human influences on forest ecosystems: the southern wildland-urban interface assessment: summary report

Treesearch

Edward A. Macie; L. Annie Hermansen

2003-01-01

This summary report synthesizes the findings contained in the Southern Wildland-Urban Interface Assessment (General Technical Report SRS-55). The Assessment provides a review of critical wildland-urban interface issues, challenges, and needs for the Southern United States. Topics include population and demographic trends, economic and tax issues, land use planning and...

The impact of shyness on problematic internet use: the role of loneliness.

PubMed

Huan, Vivien S; Ang, Rebecca P; Chong, Wan Har; Chye, Stefanie

2014-01-01

In recent years, research indicated that the problematic effects of Internet use must be examined together with individual differences present in its users with which such effects are contingent. This study examined loneliness in adolescents as a mediator of the relationship between shyness and their generalized problematic Internet use (PIU). A total of 1469 adolescents (48.5% male, 51.5% female) from Grade 8 and Grade 9 classes participated in this study. Using the Social Reticence Scale (SRS), the revised UCLA Loneliness scale and the Generalized Problematic Internet Use scale, initial findings indicated significant correlations among the three variables. Results from the study further revealed that loneliness completely mediated the relationship between shyness and generalized problematic Internet use. Implications for intervention work addressing both loneliness and shyness issues facing adolescents who are problematic users of the Internet were discussed.

A portable toolbox to monitor and evaluate signal operations.

DOT National Transportation Integrated Search

2011-10-01

Researchers from the Texas Transportation Institute developed a portable tool consisting of a fieldhardened : computer interfacing with the traffic signal cabinet through special enhanced Bus Interface Units. : The toolbox consisted of a monitoring t...

Standard interface: Twin-coaxial converter

NASA Technical Reports Server (NTRS)

Lushbaugh, W. A.

1976-01-01

The network operations control center standard interface has been adopted as a standard computer interface for all future minicomputer based subsystem development for the Deep Space Network. Discussed is an intercomputer communications link using a pair of coaxial cables. This unit is capable of transmitting and receiving digital information at distances up to 600 m with complete ground isolation between the communicating devices. A converter is described that allows a computer equipped with the standard interface to use the twin coaxial link.

A Comparison of Two Control Display Unit Concepts on Flight Management System Training

NASA Technical Reports Server (NTRS)

Abbott, Terence S.

1997-01-01

One of the biggest challenges for a pilot in the transition to a 'glass' cockpit is understanding the flight management system (FMS). Because of both the complex nature of the FMS and the pilot-FMS interface, a large portion of transition training is devoted to the FMS. The current study examined the impact of the primary pilot-FMS interface, the control display unit (CDU), on FMS training. Based on the hypothesis that the interface design could have a significant impact on training, an FMS simulation with two separate interfaces was developed. One interface was similar to a current-generation design, and the other was a multiwindows CDU based on graphical user interface techniques. For both application and evaluation reasons, constraints were applied to the graphical CDU design to maintain as much similarity as possible with the conventional CDU. This preliminary experiment was conducted to evaluate the interface effects on training. Sixteen pilots with no FMS experience were used in a between-subjects test. A time-compressed, airline-type FMS training environment was simulated. The subjects were trained to a fixed-time criterion, and performance was measured in a final, full-mission simulation context. This paper describes the technical approach, simulation implementation, and experimental results of this effort.

How risk management can prevent future wildfire disasters in the wildland-urban interface

PubMed Central

Calkin, David E.; Cohen, Jack D.; Finney, Mark A.; Thompson, Matthew P.

2014-01-01

Recent fire seasons in the western United States are some of the most damaging and costly on record. Wildfires in the wildland-urban interface on the Colorado Front Range, resulting in thousands of homes burned and civilian fatalities, although devastating, are not without historical reference. These fires are consistent with the characteristics of large, damaging, interface fires that threaten communities across much of the western United States. Wildfires are inevitable, but the destruction of homes, ecosystems, and lives is not. We propose the principles of risk analysis to provide land management agencies, first responders, and affected communities who face the inevitability of wildfires the ability to reduce the potential for loss. Overcoming perceptions of wildland-urban interface fire disasters as a wildfire control problem rather than a home ignition problem, determined by home ignition conditions, will reduce home loss. PMID:24344292

Development at the wildland-urban interface and the mitigation of forest-fire risk.

PubMed

Spyratos, Vassilis; Bourgeron, Patrick S; Ghil, Michael

2007-09-04

This work addresses the impacts of development at the wildland-urban interface on forest fires that spread to human habitats. Catastrophic fires in the western United States and elsewhere make these impacts a matter of urgency for decision makers, scientists, and the general public. Using a simple fire-spread model, along with housing and vegetation data, we show that fire size probability distributions can be strongly modified by the density and flammability of houses. We highlight a sharp transition zone in the parameter space of vegetation flammability and house density. Many actual fire landscapes in the United States appear to have spreading properties close to this transition. Thus, the density and flammability of buildings should be taken into account when assessing fire risk at the wildland-urban interface. Moreover, our results highlight ways for regulation at this interface to help mitigate fire risk.

An ultrasonic technique to measure the depth of burn wounds in humans

NASA Astrophysics Data System (ADS)

Yost, William T.; Cantrell, John H.; Hanna, Pamela D.

1991-06-01

Whenever ultrasound encounters discontinuity in its medium of propagation, some energy is reflected from the interface. Such reflections or echoes occur when incident energy encounters the front skin, viable/necrotic, and dermis/fat skin tissue interfaces. It was shown that the most probable cause of the viable/necrotic interface is the uncoiling of collagen in the necrotic tissue, which can cause a reflection at the viable/necrotic interface of approximately 10 percent of the wave amplitude, and is approximately the same as that from the other two interfaces noted. The instrument, still in the prototype stage, was designed to detect the various reflections from within the skin layer. It is shown that, by studying the timing between the various echoes, one can use ultrasound as an aid in diagnosing the depth of burned skin tissue in humans. The instrument is a 60-MHz A-scan unit, modified to more easily identify the echoes occurring within the short time interval during which the reflections are received from the skin layers. A high frequency unit was selected so that various transducers could be utilized to optimize the system. Signal conditioning circuits were modified and added to provide an adequate display of the principle reflections expected. The unit was successful in studying burned tissue in pigs and was recently used to study burn wounds in humans. Measurement techniques and preliminary results are presented.

An ultrasonic technique to measure the depth of burn wounds in humans

NASA Technical Reports Server (NTRS)

Yost, William T.; Cantrell, John H.; Hanna, Pamela D.

1991-01-01

Whenever ultrasound encounters discontinuity in its medium of propagation, some energy is reflected from the interface. Such reflections or echoes occur when incident energy encounters the front skin, viable/necrotic, and dermis/fat skin tissue interfaces. It was shown that the most probable cause of the viable/necrotic interface is the uncoiling of collagen in the necrotic tissue, which can cause a reflection at the viable/necrotic interface of approximately 10 percent of the wave amplitude, and is approximately the same as that from the other two interfaces noted. The instrument, still in the prototype stage, was designed to detect the various reflections from within the skin layer. It is shown that, by studying the timing between the various echoes, one can use ultrasound as an aid in diagnosing the depth of burned skin tissue in humans. The instrument is a 60-MHz A-scan unit, modified to more easily identify the echoes occurring within the short time interval during which the reflections are received from the skin layers. A high frequency unit was selected so that various transducers could be utilized to optimize the system. Signal conditioning circuits were modified and added to provide an adequate display of the principle reflections expected. The unit was successful in studying burned tissue in pigs and was recently used to study burn wounds in humans. Measurement techniques and preliminary results are presented.

Investigation of Shallow Undex in Littoral Ocean Domain

DTIC Science & Technology

2014-06-01

pPos Units=Pa #Units: psi, ksi, Pa, MPa, bar or scaling factor # Var=pNeg Units=Pa #Units: psi, ksi, Pa, MPa...net) # i = Impulse intensity (time in sec) # ppos = Element pressure on "positive" side (normal points toward "eye") of coupling interface

The ExoMars PanCam Instrument

NASA Astrophysics Data System (ADS)

Griffiths, Andrew; Coates, Andrew; Muller, Jan-Peter; Jaumann, Ralf; Josset, Jean-Luc; Paar, Gerhard; Barnes, David

2010-05-01

The ExoMars mission has evolved into a joint European-US mission to deliver a trace gas orbiter and a pair of rovers to Mars in 2016 and 2018 respectively. The European rover will carry the Pasteur exobiology payload including the 1.56 kg Panoramic Camera. PanCam will provide multispectral stereo images with 34 deg horizontal field-of-view (580 microrad/pixel) Wide-Angle Cameras (WAC) and (83 microrad/pixel) colour monoscopic "zoom" images with 5 deg horizontal field-of-view High Resolution Camera (HRC). The stereo Wide Angle Cameras (WAC) are based on Beagle 2 Stereo Camera System heritage [1]. Integrated with the WACs and HRC into the PanCam optical bench (which helps the instrument meet its planetary protection requirements) is the PanCam interface unit (PIU); which provides image storage, a Spacewire interface to the rover and DC-DC power conversion. The Panoramic Camera instrument is designed to fulfil the digital terrain mapping requirements of the mission [2] as well as providing multispectral geological imaging, colour and stereo panoramic images and solar images for water vapour abundance and dust optical depth measurements. The High Resolution Camera (HRC) can be used for high resolution imaging of interesting targets detected in the WAC panoramas and of inaccessible locations on crater or valley walls. Additionally HRC will be used to observe retrieved subsurface samples before ingestion into the rest of the Pasteur payload. In short, PanCam provides the overview and context for the ExoMars experiment locations, required to enable the exobiology aims of the mission. In addition to these baseline capabilities further enhancements are possible to PanCam to enhance it's effectiveness for astrobiology and planetary exploration: 1. Rover Inspection Mirror (RIM) 2. Organics Detection by Fluorescence Excitation (ODFE) LEDs [3-6] 3. UVIS broadband UV Flux and Opacity Determination (UVFOD) photodiode This paper will discuss the scientific objectives and resource impacts of these enhancements. References: 1. Griffiths, A.D., Coates, A.J., Josset, J.-L., Paar, G., Hofmann, B., Pullan, D., Ruffer, P., Sims, M.R., Pillinger, C.T., The Beagle 2 stereo camera system, Planet. Space Sci. 53, 1466-1488, 2005. 2. Paar, G., Oberst, J., Barnes, D.P., Griffiths, A.D., Jaumann, R., Coates, A.J., Muller, J.P., Gao, Y., Li, R., 2007, Requirements and Solutions for ExoMars Rover Panoramic Camera 3d Vision Processing, abstract submitted to EGU meeting, Vienna, 2007. 3. Storrie-Lombardi, M.C., Hug, W.F., McDonald, G.D., Tsapin, A.I., and Nealson, K.H. 2001. Hollow cathode ion lasers for deep ultraviolet Raman spectroscopy and fluorescence imaging. Rev. Sci. Ins., 72 (12), 4452-4459. 4. Nealson, K.H., Tsapin, A., and Storrie-Lombardi, M. 2002. Searching for life in the universe: unconventional methods for an unconventional problem. International Microbiology, 5, 223-230. 5. Mormile, M.R. and Storrie-Lombardi, M.C. 2005. The use of ultraviolet excitation of native fluorescence for identifying biomarkers in halite crystals. Astrobiology and Planetary Missions (R. B. Hoover, G. V. Levin and A. Y. Rozanov, Eds.), Proc. SPIE, 5906, 246-253. 6. Storrie-Lombardi, M.C. 2005. Post-Bayesian strategies to optimize astrobiology instrument suites: lessons from Antarctica and the Pilbara. Astrobiology and Planetary Missions (R. B. Hoover, G. V. Levin and A. Y. Rozanov, Eds.), Proc. SPIE, 5906, 288-301.

Advanced Aircraft Interfaces: The Machine Side of the Man-Machine Interface (Les Interfaces sur les Avions de Pointe: L’Aspect Machine de l’Interface Homme-Machine)

DTIC Science & Technology

1992-10-01

Manager , Advanced Transport Operating Systems Program Office Langley Research Center Mail Stop 265 Hampton, VA 23665-5225 United States Programme Committee...J.H.Lind, and C.G.Burge Advanced Cockpit - Mission and Image Management 4 by J. Struck Aircrew Acceptance of Automation in the Cockpit 5 by M. Hicks and I...DESIGN CONCEPTS AND TOOLS A Systems Approach to the Advanced Aircraft Man-Machine Interface 23 by F. Armogida Management of Avionics Data in the Cockpit

Interface ferromagnetism in oxide superlattices of CaMnO3/CaRuO3

NASA Astrophysics Data System (ADS)

Takahashi, K. S.; Kawasaki, M.; Tokura, Y.

2001-08-01

Oxide superlattices composed of antiferromagnetic insulator layers of CaMnO3 (10 unit cells) and paramagnetic metal layers of CaRuO3 (N unit cells) were fabricated on LaAlO3 substrates by pulsed-laser deposition. All the superlattices show ferromagnetic transitions at an almost identical temperature (TC˜95 K) and negative magnetoresistance below TC. Each magnetization and magnetoconductance of the whole superlattice at 5 K is constant and independent of CaRuO3 layer thickness when normalized by the number of the interfaces between CaMnO3 and CaRuO3. These results indicate that the ferromagnetism shows up only at the interface and is responsible for the magnetoresistance.

Crossover from Incoherent to Coherent Phonon Scattering in Epitaxial Oxide Superlattices

DTIC Science & Technology

2013-12-08

function of interface density. We do so by synthesizing superlattices of electrically insulating perovskite oxides 1. REPORT DATE (DD-MM-YYYY) 4. TITLE...synthesizing superlattices of electrically insulating perovskite oxides and systematically varying the interface density, with unit-cell precision, using two...a function of interface density. Wedo so by synthesizing superlattices of electrically insulating perovskite oxides and systematically varying the

Image Understanding and Intelligent Parallel Systems

DTIC Science & Technology

1991-05-09

a common user interface for the interactive , graphical manipulation of those histories, and...Circuits and Systems, August 1987. Yap, S.-K. and M.L. Scott, "PenGuin: A language for reactive graphical user interface programming," to appear, INTERACT 󈨞, Cambridge, United Kingdom, 1990. 74 ...of up to a factor of 100 over single-workstation implementations. User interfaces to large multiprocessor computers are a difficult issue addressed

Lightweight concrete modification factor for shear friction.

DOT National Transportation Integrated Search

2013-10-01

This report describes the results of a study initiated to examine the influence of concrete unit weight on the direct shear transfer across an interface of concretes cast at different times. This type of interface is common with structural precast co...

Fresenius AS.TEC204 blood cell separator.

PubMed

Sugai, Mikiya

2003-02-01

Fresenius AS.TEC204 is a third-generation blood cell separator that incorporates the continuous centrifugal separation method and automatic control of the cell separation process. Continuous centrifugation separates cell components according to their specific gravity, and different cell components are either harvested or eliminated as needed. The interface between the red blood cell and plasma is optically detected, and the Interface Control (IFC) cooperates with different pumps, monitors and detectors to harvest required components automatically. The system is composed of three major sections; the Front Panel Unit; the Pump Unit, and the Centrifuge Unit. This unit can be used for a wide variety of clinical applications including collection of platelets, peripheral blood stem cells, bone marrow stem cells, granulocytes, mononuclear cells, and exchange of plasma or red cells, and for plasma treatment.

In Vitro Antibacterial Properties of Cefiderocol, a Novel Siderophore Cephalosporin, against Gram-Negative Bacteria

PubMed Central

Sato, Takafumi; Ota, Merime; Takemura, Miki; Nishikawa, Toru; Toba, Shinsuke; Kohira, Naoki; Miyagawa, Satoshi; Ishibashi, Naoki; Nakamura, Rio; Tsuji, Masakatsu; Yamano, Yoshinori

2017-01-01

ABSTRACT Cefiderocol (CFDC; S-649266), a novel parenteral siderophore cephalosporin conjugated with a catechol moiety, has a characteristic antibacterial spectrum with a potent activity against a broad range of aerobic Gram-negative bacterial species, including carbapenem-resistant strains of Enterobacteriaceae and nonfermenting bacteria such as Pseudomonas aeruginosa and Acinetobacter baumannii. Cefiderocol has affinity mainly for penicillin-binding protein 3 (PBP3) of Enterobacteriaceae and nonfermenting bacteria similar to that of ceftazidime. A deficiency of the iron transporter PiuA in P. aeruginosa or both CirA and Fiu in Escherichia coli caused 16-fold increases in cefiderocol MICs, suggesting that these iron transporters contribute to the permeation of cefiderocol across the outer membrane. The deficiency of OmpK35/36 in Klebsiella pneumoniae and the overproduction of efflux pump MexA-MexB-OprM in P. aeruginosa showed no significant impact on the activity of cefiderocol. PMID:29061741

MPEG-1 low-cost encoder solution

NASA Astrophysics Data System (ADS)

Grueger, Klaus; Schirrmeister, Frank; Filor, Lutz; von Reventlow, Christian; Schneider, Ulrich; Mueller, Gerriet; Sefzik, Nicolai; Fiedrich, Sven

1995-02-01

A solution for real-time compression of digital YCRCB video data to an MPEG-1 video data stream has been developed. As an additional option, motion JPEG and video telephone streams (H.261) can be generated. For MPEG-1, up to two bidirectional predicted images are supported. The required computational power for motion estimation and DCT/IDCT, memory size and memory bandwidth have been the main challenges. The design uses fast-page-mode memory accesses and requires only one single 80 ns EDO-DRAM with 256 X 16 organization for video encoding. This can be achieved only by using adequate access and coding strategies. The architecture consists of an input processing and filter unit, a memory interface, a motion estimation unit, a motion compensation unit, a DCT unit, a quantization control, a VLC unit and a bus interface. For using the available memory bandwidth by the processing tasks, a fixed schedule for memory accesses has been applied, that can be interrupted for asynchronous events. The motion estimation unit implements a highly sophisticated hierarchical search strategy based on block matching. The DCT unit uses a separated fast-DCT flowgraph realized by a switchable hardware unit for both DCT and IDCT operation. By appropriate multiplexing, only one multiplier is required for: DCT, quantization, inverse quantization, and IDCT. The VLC unit generates the video-stream up to the video sequence layer and is directly coupled with an intelligent bus-interface. Thus, the assembly of video, audio and system data can easily be performed by the host computer. Having a relatively low complexity and only small requirements for DRAM circuits, the developed solution can be applied to low-cost encoding products for consumer electronics.

Quasi 2D Ultrahigh Carrier Density in a Complex Oxide Broken Gap Heterojunction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, Peng; Droubay, Timothy C.; Jeong, Jong S.

2016-01-21

Two-dimensional (2D) ultra-high carrier densities at complex oxide interfaces are of considerable current research interest for novel plasmonic and high charge-gain devices. However, the highest 2D electron density obtained in oxide heterostructures is thus far limited to 3×1014 cm-2 (½ electron/unit cell/interface) at GdTiO3/SrTiO3 interfaces, and is typically an order of magnitude lower at LaAlO3/SrTiO3 interfaces. Here we show that carrier densities much higher than 3×1014 cm-2 can be achieved via band engineering. Transport measurements for 3 nm SrTiO3/t u.c. NdTiO3/3 nm SrTiO3/LSAT (001) show that charge transfer significantly in excess of the value expected from the polar discontinuity modelmore » occurs for higher t values. The carrier density remains unchanged, and equivalent to ½ electron/unit cell/interface for t < 6 unit cells. However, above a critical NdTiO3 thickness of 6 u.c., electrons from the valence band of NdTiO3 spill over into the SrTiO3 conduction band as a natural consequence of the band alignment. An atomistic model consistent with first-principle calculations and experimental results is proposed for the charge transfer mechanisms. These results may provide an exceptional route to the realization of the room-temperature oxide electronics.« less

Droplet actuator analyzer with cartridge

NASA Technical Reports Server (NTRS)

Sturmer, Ryan A. (Inventor); Paik, Philip Y. (Inventor); Srinivasan, Vijay (Inventor); Brafford, Keith R. (Inventor); West, Richard M. (Inventor); Smith, Gregory F. (Inventor); Pollack, Michael G. (Inventor); Pamula, Vamsee K. (Inventor)

2011-01-01

A droplet actuator with cartridge is provided. According to one embodiment, a sample analyzer is provided and includes an analyzer unit comprising electronic or optical receiving means, a cartridge comprising self-contained droplet handling capabilities, and a wherein the cartridge is coupled to the analyzer unit by a means which aligns electronic and/or optical outputs from the cartridge with electronic or optical receiving means on the analyzer unit. According to another embodiment, a sample analyzer is provided and includes a sample analyzer comprising a cartridge coupled thereto and a means of electrical interface and/or optical interface between the cartridge and the analyzer, whereby electrical signals and/or optical signals may be transmitted from the cartridge to the analyzer.

DC Voltage Interface Standards for Naval Applications

DTIC Science & Technology

2015-06-24

norbert.doerry@navy.mil Dr. John Amy Naval Sea Systems Command United States Navy Washington DC , USA john.amy@navy.mil Abstract—. MIL-STD-1399...standards have been established for DC interfaces on U.S. naval surface ships. This paper provides recommendations for specific standard DC

HAL/S-FC compiler system functional specification

NASA Technical Reports Server (NTRS)

1974-01-01

The functional requirements to be met by the HAL/S-FC compiler, and the hardware and software compatibilities between the compiler system and the environment in which it operates are defined. Associated runtime facilities and the interface with the Software Development Laboratory are specified. The construction of the HAL/S-FC system as functionally separate units and the interfaces between those units is described. An overview of the system's capabilities is presented and the hardware/operating system requirements are specified. The computer-dependent aspects of the HAL/S-FC are also specified. Compiler directives are included.

Generation-based memory synchronization in a multiprocessor system with weakly consistent memory accesses

DOEpatents

Ohmacht, Martin

2017-08-15

In a multiprocessor system, a central memory synchronization module coordinates memory synchronization requests responsive to memory access requests in flight, a generation counter, and a reclaim pointer. The central module communicates via point-to-point communication. The module includes a global OR reduce tree for each memory access requesting device, for detecting memory access requests in flight. An interface unit is implemented associated with each processor requesting synchronization. The interface unit includes multiple generation completion detectors. The generation count and reclaim pointer do not pass one another.

Generation-based memory synchronization in a multiprocessor system with weakly consistent memory accesses

DOEpatents

Ohmacht, Martin

2014-09-09

In a multiprocessor system, a central memory synchronization module coordinates memory synchronization requests responsive to memory access requests in flight, a generation counter, and a reclaim pointer. The central module communicates via point-to-point communication. The module includes a global OR reduce tree for each memory access requesting device, for detecting memory access requests in flight. An interface unit is implemented associated with each processor requesting synchronization. The interface unit includes multiple generation completion detectors. The generation count and reclaim pointer do not pass one another.

Interactive graphical computer-aided design system

NASA Technical Reports Server (NTRS)

Edge, T. M.

1975-01-01

System is used for design, layout, and modification of large-scale-integrated (LSI) metal-oxide semiconductor (MOS) arrays. System is structured around small computer which provides real-time support for graphics storage display unit with keyboard, slave display unit, hard copy unit, and graphics tablet for designer/computer interface.

Area of Interest 1, CO 2 at the Interface. Nature and Dynamics of the Reservoir/Caprock Contact and Implications for Carbon Storage Performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mozley, Peter; Evans, James; Dewers, Thomas

2014-10-31

We examined the influence of geologic features present at the reservoir/caprock interface on the transmission of supercritical CO 2 into and through caprock. We focused on the case of deformation-band faults in reservoir lithologies that intersect the interface and transition to opening-mode fractures in caprock lithologies. Deformation-band faults are exceeding common in potential CO 2 injection units and our fieldwork in Utah indicates that this sort of transition is common. To quantify the impact of these interface features on flow and transport we first described the sedimentology and permeability characteristics of selected sites along the Navajo Sandstone (reservoir lithology) andmore » Carmel Formation (caprock lithology) interface, and along the Slickrock Member (reservoir lithology) and Earthy Member (caprock lithology) of the Entrada Sandstone interface, and used this information to construct conceptual permeability models for numerical analysis. We then examined the impact of these structures on flow using single-phase and multiphase numerical flow models for these study sites. Key findings include: (1) Deformation-band faults strongly compartmentalize the reservoir and largely block cross-fault flow of supercritical CO 2. (2) Significant flow of CO 2 through the fractures is possible, however, the magnitude is dependent on the small-scale geometry of the contact between the opening-mode fracture and the deformation band fault. (3) Due to the presence of permeable units in the caprock, caprock units are capable of storing significant volumes of CO 2, particularly when the fracture network does not extend all the way through the caprock. The large-scale distribution of these deformation-bandfault-to-opening-mode-fractures is related to the curvature of the beds, with greater densities of fractures in high curvature regions. We also examined core and outcrops from the Mount Simon Sandstone and Eau Claire Formation reservoir/caprock interface in order to extend our work to a reservoir/caprock pair this is currently being assessed for long-term carbon storage. These analyses indicate that interface features similar to those observed at the Utah sites 3 were not observed. Although not directly related to our main study topic, one byproduct of our investigation is documentation of exceptionally high degrees of heterogeneity in the pore-size distribution of the Mount Simon Sandstone. This suggests that the unit has a greater-than-normal potential for residual trapping of supercritical CO 2.« less

Communication: A method to compute the transport coefficient of pure fluids diffusing through planar interfaces from equilibrium molecular dynamics simulations.

PubMed

Vermorel, Romain; Oulebsir, Fouad; Galliero, Guillaume

2017-09-14

The computation of diffusion coefficients in molecular systems ranks among the most useful applications of equilibrium molecular dynamics simulations. However, when dealing with the problem of fluid diffusion through vanishingly thin interfaces, classical techniques are not applicable. This is because the volume of space in which molecules diffuse is ill-defined. In such conditions, non-equilibrium techniques allow for the computation of transport coefficients per unit interface width, but their weak point lies in their inability to isolate the contribution of the different physical mechanisms prone to impact the flux of permeating molecules. In this work, we propose a simple and accurate method to compute the diffusional transport coefficient of a pure fluid through a planar interface from equilibrium molecular dynamics simulations, in the form of a diffusion coefficient per unit interface width. In order to demonstrate its validity and accuracy, we apply our method to the case study of a dilute gas diffusing through a smoothly repulsive single-layer porous solid. We believe this complementary technique can benefit to the interpretation of the results obtained on single-layer membranes by means of complex non-equilibrium methods.

SU-F-J-159: Influence of the Elevated Posterior Position by Using the Customized Vacuum-Bag On the Abdominal MR Image Quality: A Quantitative Phantom Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wong, O; Yuan, J; Law, M

Purpose: Signal-to-noise ratio(SNR) of MR abdominal imaging in diagnostic radiology is maximized by minimizing the coil-to-patient distance. However, for radiotherapy applications, customized vacuum-bag is needed for abdominal immobilization at the cost of the increasing distance to the posterior spine coil. This sub-optimized coil setting for RT applications may compromise image quality, such as SNR and homogeneity, thus potentially affect tissue delineation. In this study, we quantitatively evaluate the effect of the vertical position change on SNR and image quality change using an ACR MR phantom. Methods: An ACR MR phantom was placed on the flat couch top. Images were acquiredmore » using an 18-channel body array coil and spine coil on a dedicated 1.5T MR-simulator. The scan was repeated three times with the ACR phantom elevated up to 7.5cm from the couch top, with a step size of 2.5cm. All images were acquired using standard ACR test sequence protocol of 2D spin-echo T1-weighted(TR/TE=500/200ms) and T2-weighted(TR/TE1/TE2=2000/20/80) sequences. For all scans, pre-scan normalization was turned on, and the distance between the phantom and the anterior 18-channel body array coil was kept constant. SNR was calculated using the slice with a large water-only region of the phantom. Percent intensity uniformity(PIU) and low contrast object detectability(LCD) were assessed by following ACR test guidelines. Results: The decrease in image SNR(from 335.8 to 169.3) and LCD(T1: from 31 to 19 spokes, T2: 26 to 16 spokes) were observed with increasing vertical distance. After elevating the phantom by 2.5cm(approximately the thickness of standard vacuum-bag), SNR change(from 335.8 to 275.5) and LCD(T1: 31 to 26 spokes, T2: 26 to 21 spokes) change were noted. However, similar PIU was obtained for all choices of vertical distance (T1: 94.5%–95.0%, T2: 94.4%–96.8%). Conclusion: After elevating the scan object, reduction in SNR level and contrast detectability but no change in image homogeneity was observed.« less

Beta-Strand Interfaces of Non-Dimeric Protein Oligomers Are Characterized by Scattered Charged Residue Patterns

PubMed Central

Feverati, Giovanni; Achoch, Mounia; Zrimi, Jihad; Vuillon, Laurent; Lesieur, Claire

2012-01-01

Protein oligomers are formed either permanently, transiently or even by default. The protein chains are associated through intermolecular interactions constituting the protein interface. The protein interfaces of 40 soluble protein oligomers of stœchiometries above two are investigated using a quantitative and qualitative methodology, which analyzes the x-ray structures of the protein oligomers and considers their interfaces as interaction networks. The protein oligomers of the dataset share the same geometry of interface, made by the association of two individual β-strands (β-interfaces), but are otherwise unrelated. The results show that the β-interfaces are made of two interdigitated interaction networks. One of them involves interactions between main chain atoms (backbone network) while the other involves interactions between side chain and backbone atoms or between only side chain atoms (side chain network). Each one has its own characteristics which can be associated to a distinct role. The secondary structure of the β-interfaces is implemented through the backbone networks which are enriched with the hydrophobic amino acids favored in intramolecular β-sheets (MCWIV). The intermolecular specificity is provided by the side chain networks via positioning different types of charged residues at the extremities (arginine) and in the middle (glutamic acid and histidine) of the interface. Such charge distribution helps discriminating between sequences of intermolecular β-strands, of intramolecular β-strands and of β-strands forming β-amyloid fibers. This might open new venues for drug designs and predictive tool developments. Moreover, the β-strands of the cholera toxin B subunit interface, when produced individually as synthetic peptides, are capable of inhibiting the assembly of the toxin into pentamers. Thus, their sequences contain the features necessary for a β-interface formation. Such β-strands could be considered as ‘assemblons’, independent associating units, by homology to the foldons (independent folding unit). Such property would be extremely valuable in term of assembly inhibitory drug development. PMID:22496732

A Unit on Deterministic Chaos for Student Teachers

ERIC Educational Resources Information Center

Stavrou, D.; Assimopoulos, S.; Skordoulis, C.

2013-01-01

A unit aiming to introduce pre-service teachers of primary education to the limited predictability of deterministic chaotic systems is presented. The unit is based on a commercial chaotic pendulum system connected with a data acquisition interface. The capabilities and difficulties in understanding the notion of limited predictability of 18…

Web OPAC Interfaces: An Overview.

ERIC Educational Resources Information Center

Babu, B. Ramesh; O'Brien, Ann

2000-01-01

Discussion of Web-based online public access catalogs (OPACs) focuses on a review of six Web OPAC interfaces in use in academic libraries in the United Kingdom. Presents a checklist and guidelines of important features and functions that are currently available, including search strategies, access points, display, links, and layout. (Author/LRW)

Digital forestry in the wildland urban interface

Treesearch

Michael C. Wimberly; Yangjian Zhang; John A. Stanturf

2006-01-01

Growing human populations have led to the expansion of the Wildland-Urban interface (WUI) across the southeastern United States. The juxtaposition of buildings, infrastructure, and forests in the WUI creates challenges for natural resource managers. The presence of flammable vegetation, high rates of human-caused ignitions and high building densities combine to...

Digital forestry in the wildland-urban interface

Treesearch

Michael C. Wimberly; Yangjian Zhang; John A. Stanturf

2006-01-01

Growing human populations have led to the expansion of the Wildland-Urban Interface (WUI) across the southeastern United States. The juxtaposition of buildings, infrastructure. and forests in the WUI creates challenges for natural resource managers. The presence of flammable vegetation. high rates of human-caused ignitions and high building densities combine to...

Performance of a High-Fidelity 4kW-Class Engineering Model PPU and Integration with HiVHAc System

NASA Technical Reports Server (NTRS)

Pinero, Luis R.; Kamhawi, Hani; Shilo, Vlad

2016-01-01

The High Voltage Hall Accelerator (HiVHAc) propulsion system consists of a thruster, power processing unit (PPU), and propellant feed system. An engineering model PPU was developed by Colorado Power Electronics, Inc. funded by NASA's Small Business Innovative Research Program. This PPU uses an innovative 3-phase resonant converter to deliver 4 kW of discharge power over a wide range of input and output voltage conditions. The PPU includes a digital control interface unit that automatically controls the PPU and a xenon flow control module (XFCM). It interfaces with a control computer to receive highlevel commands and relay telemetry through a MIL-STD-1553B interface. The EM PPU was thoroughly tested at GRC for functionality and performance at temperature limits and demonstrated total efficiencies a high as 95 percent. Integrated testing of the unit was performed with the HiVHAc thruster and the XFCM to demonstrate closed-loop control of discharge current with anode flow. Initiation of the main discharge and power throttling were also successfully demonstrated and discharge oscillations were characterized.

System and Mass Storage Study for Defense Mapping Agency Topographic Center (DMATC/HC)

DTIC Science & Technology

1977-04-01

34•»-—•—■»■—- view. The assessment should be based on carefully designed control condi- tions—data volume, resolution, function, etc...egories: hardware control and library management support. This software is designed to interface with IBM 360/370 OS and OS/VS. No interface with a...laser re- cording unit includes a programmable recorder control subsystem which can be designed to provide a hardware and software interface compatible

A system for the delivery of programmable, adaptive stimulation intensity envelopes for drop foot correction applications.

PubMed

Breen, P P; O'Keeffe, D T; Conway, R; Lyons, G M

2006-03-01

We describe the design of an intelligent drop foot stimulator unit for use in conjunction with a commercial neuromuscular electrical nerve stimulation (NMES) unit, the NT2000. The developed micro-controller unit interfaces to a personal computer (PC) and a graphical user interface (GUI) allows the clinician to graphically specify the shape of the stimulation intensity envelope required for a subject undergoing drop foot correction. The developed unit is based on the ADuC812S micro-controller evaluation board from Analog Devices and uses two force sensitive resistor (FSR) based foot-switches to control application of stimulus. The unit has the ability to display to the clinician how the stimulus intensity envelope is being delivered during walking using a data capture capability. The developed system has a built-in algorithm to dynamically adjust the delivery of stimulus to reflect changes both within the gait cycle and from cycle to cycle. Thus, adaptive control of stimulus intensity is achieved.

The Control Unit of KM3NeT data acquisition

NASA Astrophysics Data System (ADS)

Bozza, Cristiano

2016-04-01

The KM3NeT Collaboration is building a new generation of neutrino telescopes in the Mediterranean Sea. With the telescopes, scientists will search for cosmic neutrinos to study highly energetic objects in the Universe, while one neutrino detector will be dedicated to measure the properties of the high-energy neutrino particles themselves. Control of the KM3NeT data acquisition processes is handled by the KM3NeT Control Unit, which has been designed to maximise the detector live time. The Control Unit features software programs with different roles, following the philosophy of having no single point of failure. While all programs are interconnected, each one can also work alone for most of the time in case other services are unavailable. All services run on the Common Language Runtime, which ensures portability, flexibility and automatic memory management. Each service has an embedded Web server, providing a user interface as well as programmatic access to data and functions. Data to and from detector components for monitoring and management purposes are transmitted using a custom designed protocol. The Control Unit is interfaced to one or more Message Dispatchers to control the data acquisition chain. A Data Base Interface provides fast and fault-tolerant connection to a remote Data Base.

Using an iPad for Basic Communication Between Spanish-Speaking Families and Nurses in Pediatric Acute Care: A Feasibility Pilot Study.

PubMed

Jackson, Kylie H; Mixer, Sandra J

2017-08-01

The growing number of Spanish speakers in the United States poses communication challenges for healthcare providers. Language barriers in pediatric acute care have been associated with an increased risk for adverse events, longer hospital stays, and decreased quality of care. In addition, clinicians' usage of interpreter services is inconsistent. In fact, nurses often lack interpreter support during daily bedside care. Nursing staff at a pediatric children's hospital in the southeastern United States identified bedside communication with Spanish-speaking patients and families as a clinical challenge. To address this challenge, a basic communication interface, UTalk version 1.0 (the author is the owner and proprietor), supported by an Apple iPad, was developed by the researcher with input from nursing staff, a certified medical interpreter, and Spanish-speaking community members. A feasibility pilot study of the interface's usability and engagement was conducted on the hospital's pediatric medical-surgical unit through qualitative interviews with nurse-family dyads. Three themes emerged from the data: UTalk-facilitated communication, UTalk needs improvement, and interpreter miscommunication. These findings indicate that a mobile digital device interface is a feasible method for augmenting bedside communication with Spanish-speaking patients and families. These results also may serve as a reference for the development of similar mobile device interfaces. Further research with a larger sample size is needed.

Development of an interface-focused educational complex intervention.

PubMed

Sampson, Rod; MacVicar, Ronald; Wilson, Philip

2017-09-01

In many countries, the medical primary-secondary care interface is central to the delivery of quality patient care. There is prevailing interest in developing initiatives to improve interface working for the benefit of health care professionals and their patients. To describe the development of an educational intervention designed to improve working at the primary-secondary care interface in NHS Scotland (United Kingdom) within the context of the Medical Research Council framework for the development and evaluation of complex interventions. A primary-secondary care interface focused Practice-based Small Group Learning (PBSGL) module was developed building upon qualitative synthesis and original research. A 'meeting of experts' shaped the module, which was subsequently piloted with a group of interface clinicians. Reflections on the module were sought from clinicians across NHS Scotland to provide contextual information from other areas. The PBSGL approach can be usefully applied to the development of a primary-secondary care interface-focused medical educational intervention.

Sampling and Control Circuit Board for an Inertial Measurement Unit

NASA Technical Reports Server (NTRS)

Chelmins, David T (Inventor); Sands, Obed (Inventor); Powis, Richard T., Jr. (Inventor)

2016-01-01

A circuit board that serves as a control and sampling interface to an inertial measurement unit ("IMU") is provided. The circuit board is also configured to interface with a local oscillator and an external trigger pulse. The circuit board is further configured to receive the external trigger pulse from an external source that time aligns the local oscillator and initiates sampling of the inertial measurement device for data at precise time intervals based on pulses from the local oscillator. The sampled data may be synchronized by the circuit board with other sensors of a navigation system via the trigger pulse.

Human influences on forest ecosystems: the southern wildland-urban interface assessment

Treesearch

Edward A. Macie; L. Annie Hermansen; [Editors

2002-01-01

This publication provides a review of critical wildland-urban interface issues, challenges, and needs for the Southern United States. Chapter topics include population and demographic trends; economic and tax issues; land use planning and policy; urban effects on forest ecosystems; challenges for forest resource management and conservation; social consequences of...

Interface Circuits for Self-Checking Microprocessors

NASA Technical Reports Server (NTRS)

Rennels, D. A.; Chandramouli, R.

1986-01-01

Fault-tolerant-microcomputer concept based on enhancing "simple" computer with redundancy and self-checking logic circuits detect hardware faults. Interface and checking logic and redundant processors confer on 16-bit microcomputer ability to check itself for hardware faults. Checking circuitry also checks itself. Concept of self-checking complementary pairs (SCCP's) employed throughout ICL unit.

Ionic charge accumulation at microscopic interfaces in filled composites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhu Yutao; Wang Xinheng; Xie Hengkun

1996-12-31

In this paper the charge accumulation process at microscopic interfaces in insulating materials filled with inorganic fillers is analyzed by using a unit model. Dynamic equations of interfacial ionic charge accumulation are proposed by the authors. The charge accumulation and its regulations are proved by TSC test results obtained on silica filled EPDM samples.

Behavior of P85 and P188 Poloxamer Molecules: Computer Simulations Using United Atom Force Field.

DOE PAGES

Goliaei, Ardeshir; Lau, Edmond Y.; Adhikari, Upendra; ...

2016-05-27

To study the interaction between poloxamer molecules and lipid bilayers using molecular dynamics simulation technique with the united atom resolution, we augmented the GROMOS force field to include poloxamers. We validated the force field by calculating the radii of gyration of two poloxamers, P85 and P188, solvated in water and by considering the poloxamer density distributions at the air/water interface. The emphasis of our simulations was on the study of the interaction between poloxamers and lipid bilayer. At the water/lipid bilayer interface, we observed that both poloxamers studied, P85 and P188, behaved like surfactants: the hydrophilic blocks of poloxamers becamemore » adsorbed at the polar interface, while their hydrophobic block penetrated the interface into the aliphatic tail region of the lipid bilayer. We also observed that when P85 and P188 poloxamers interacted with damaged membranes that contained pores, the hydrophobic blocks of copolymers penetrated into the membrane in the vicinity of the pore and compressed the membrane. Lastly, due to this compression, water molecules were evacuated from the pore.« less

Economic analysis of standard interface modules for use with the multi-mission spacecraft. Volume 2: Appendices and drawings

NASA Technical Reports Server (NTRS)

Greenberg, J. S.; Miller, B. P.; Russell, S.; Becar, N.

1976-01-01

The cost savings that could be obtained by the use of SIM to perform certain sensor electrical interfacing functions that were historically an integral part of the sensor are evaluated. Reduction in both the nonrecurring and recurring costs of this sensor interface hardware could be achieved through the use of SIM, and the study concludes that the development and use of certain power conditioning and data handling SIM units are economically justified.

Topological interface modes in graphene multilayer arrays

NASA Astrophysics Data System (ADS)

Wang, Feng; Ke, Shaolin; Qin, Chengzhi; Wang, Bing; Long, Hua; Wang, Kai; Lu, Peixiang

2018-07-01

We investigate the topological interface modes of surface plasmon polaritons in a multilayer system composed of graphene waveguide arrays. The topological interface modes emerge when two topologically distinct graphene multilayer arrays are connected. In such multilayer system, the non-trivial topological interface modes and trivial modes coexist. By tuning the configuration of the graphene multilayer arrays, the associated non-trivial interface modes present robust against structural disorder. The total number of topological modes is related to that of graphene layers in a unit cell of the graphene multilayer array. The results provide a new paradigm for topologically protected plasmonics in the graphene multilayer arrays. The study suggests a promising approach to realize light transport and optical switching on a deep-subwavelength scale.

Databases and coordinated research projects at the IAEA on atomic processes in plasmas

NASA Astrophysics Data System (ADS)

Braams, Bastiaan J.; Chung, Hyun-Kyung

2012-05-01

The Atomic and Molecular Data Unit at the IAEA works with a network of national data centres to encourage and coordinate production and dissemination of fundamental data for atomic, molecular and plasma-material interaction (A+M/PMI) processes that are relevant to the realization of fusion energy. The Unit maintains numerical and bibliographical databases and has started a Wiki-style knowledge base. The Unit also contributes to A+M database interface standards and provides a search engine that offers a common interface to multiple numerical A+M/PMI databases. Coordinated Research Projects (CRPs) bring together fusion energy researchers and atomic, molecular and surface physicists for joint work towards the development of new data and new methods. The databases and current CRPs on A+M/PMI processes are briefly described here.

Centrally managed unified shared virtual address space

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilkes, John

Systems, apparatuses, and methods for managing a unified shared virtual address space. A host may execute system software and manage a plurality of nodes coupled to the host. The host may send work tasks to the nodes, and for each node, the host may externally manage the node's view of the system's virtual address space. Each node may have a central processing unit (CPU) style memory management unit (MMU) with an internal translation lookaside buffer (TLB). In one embodiment, the host may be coupled to a given node via an input/output memory management unit (IOMMU) interface, where the IOMMU frontendmore » interface shares the TLB with the given node's MMU. In another embodiment, the host may control the given node's view of virtual address space via memory-mapped control registers.« less

Ferroelectric Polarization-Modulated Interfacial Fine Structures Involving Two-Dimensional Electron Gases in Pb(Zr,Ti)O3/LaAlO3/SrTiO3 Heterostructures.

PubMed

Wang, Shuangbao; Bai, Yuhang; Xie, Lin; Li, Chen; Key, Julian D; Wu, Di; Wang, Peng; Pan, Xiaoqing

2018-01-10

Interfacial fine structures of bare LaAlO 3 /SrTiO 3 (LAO/STO) heterostructures are compared with those of LAO/STO heterostructures capped with upward-polarized Pb(Zr 0.1 ,Ti 0.9 )O 3 (PZT up ) or downward-polarized Pb(Zr 0.5 ,Ti 0.5 )O 3 (PZT down ) overlayers by aberration-corrected scanning transmission electron microscopy experiments. By combining the acquired electron energy-loss spectroscopy mapping, we are able to directly observe electron transfer from Ti 4+ to Ti 3+ and ionic displacements at the interface of bare LAO/STO and PZT down /LAO/STO heterostructure unit cell by unit cell. No evidence of Ti 3+ is observed at the interface of the PZT up /LAO/STO samples. Furthermore, the confinement of the two-dimensional electron gas (2DEG) at the interface is determined by atomic-column spatial resolution. Compared with the bare LAO/STO interface, the 2DEG density at the LAO/STO interface is enhanced or depressed by the PZT down or PZT up overlayer, respectively. Our microscopy studies shed light on the mechanism of ferroelectric modulation of interfacial transport at polar/nonpolar oxide heterointerfaces, which may facilitate applications of these materials as nonvolatile memory.

An expert system shell for inferring vegetation characteristics: Changes to the historical cover type database (Task F)

NASA Technical Reports Server (NTRS)

1993-01-01

All the options in the NASA VEGetation Workbench (VEG) make use of a database of historical cover types. This database contains results from experiments by scientists on a wide variety of different cover types. The learning system uses the database to provide positive and negative training examples of classes that enable it to learn distinguishing features between classes of vegetation. All the other VEG options use the database to estimate the error bounds involved in the results obtained when various analysis techniques are applied to the sample of cover type data that is being studied. In the previous version of VEG, the historical cover type database was stored as part of the VEG knowledge base. This database was removed from the knowledge base. It is now stored as a series of flat files that are external to VEG. An interface between VEG and these files was provided. The interface allows the user to select which files of historical data to use. The files are then read, and the data are stored in Knowledge Engineering Environment (KEE) units using the same organization of units as in the previous version of VEG. The interface also allows the user to delete some or all of the historical database units from VEG and load new historical data from a file. This report summarizes the use of the historical cover type database in VEG. It then describes the new interface to the files containing the historical data. It describes minor changes that were made to VEG to enable the externally stored database to be used. Test runs to test the operation of the new interface and also to test the operation of VEG using historical data loaded from external files are described. Task F was completed. A Sun cartridge tape containing the KEE and Common Lisp code for the new interface and the modified version of the VEG knowledge base was delivered to the NASA GSFC technical representative.

Gala: A Python package for galactic dynamics

NASA Astrophysics Data System (ADS)

Price-Whelan, Adrian M.

2017-10-01

Gala is an Astropy-affiliated Python package for galactic dynamics. Python enables wrapping low-level languages (e.g., C) for speed without losing flexibility or ease-of-use in the user-interface. The API for Gala was designed to provide a class-based and user-friendly interface to fast (C or Cython-optimized) implementations of common operations such as gravitational potential and force evaluation, orbit integration, dynamical transformations, and chaos indicators for nonlinear dynamics. Gala also relies heavily on and interfaces well with the implementations of physical units and astronomical coordinate systems in the Astropy package (astropy.units and astropy.coordinates). Gala was designed to be used by both astronomical researchers and by students in courses on gravitational dynamics or astronomy. It has already been used in a number of scientific publications and has also been used in graduate courses on Galactic dynamics to, e.g., provide interactive visualizations of textbook material.

Using cloud computing infrastructure with CloudBioLinux, CloudMan, and Galaxy.

PubMed

Afgan, Enis; Chapman, Brad; Jadan, Margita; Franke, Vedran; Taylor, James

2012-06-01

Cloud computing has revolutionized availability and access to computing and storage resources, making it possible to provision a large computational infrastructure with only a few clicks in a Web browser. However, those resources are typically provided in the form of low-level infrastructure components that need to be procured and configured before use. In this unit, we demonstrate how to utilize cloud computing resources to perform open-ended bioinformatic analyses, with fully automated management of the underlying cloud infrastructure. By combining three projects, CloudBioLinux, CloudMan, and Galaxy, into a cohesive unit, we have enabled researchers to gain access to more than 100 preconfigured bioinformatics tools and gigabytes of reference genomes on top of the flexible cloud computing infrastructure. The protocol demonstrates how to set up the available infrastructure and how to use the tools via a graphical desktop interface, a parallel command-line interface, and the Web-based Galaxy interface.

[Exploring nurse, usage effectiveness of mobile nursing station].

PubMed

Chang, Fang-Mei; Lee, Ting-Ting

2013-04-01

A mobile nursing station is an innovative cart that integrates a wireless network, information technology devices, and online charts. In addition to improving clinical work and workflow efficiencies, data is integrated among different information systems and hardware devices to promote patient safety. This study investigated the effectiveness of mobile nursing cart use. We compared different distributions of nursing activity working samples to evaluate the nursing information systems in terms of interface usability and usage outcomes. There were two parts of this study. Part one used work sampling to collect nursing activity data necessary to compare a unit that used a mobile nursing cart (mobile group, n = 18) with another that did not (traditional group, n = 14). Part two applied a nursing information system interface usability questionnaire to survey the mobile unit with nurses who had used a mobile nursing station (including those who had worked in this unit as floating nurses) (n = 30) in order to explore interface usability and effectiveness. We found that using the mobile nursing station information system increased time spent on direct patient care and decreased time spent on indirect patient care and documentation. Results further indicated that participants rated interface usability as high and evaluated usage effectiveness positively. Comments made in the open-ended question section raised several points of concern, including problems / inadequacies related to hardware devices, Internet speed, and printing. This study indicates that using mobile nursing station can improve nursing activity distributions and that nurses hold generally positive attitudes toward mobile nursing station interface usability and usage effectiveness. The authors thus encourage the continued implementation of mobile nursing stations and related studies to further enhance clinical nursing care.

The wildland-urban interface in the United States.

Treesearch

V.C. Radeloff; R.B. Hammer; I. Stewart; J.S. Fried; S.S. Holcomb; J.F. McKeefry

2005-01-01

The wildland-urban interface (WUI) is the area where houses meet or intermingle with undeveloped wildland vegetation. The WUI is thus a focal area for human-environment conflicts, such as the destruction of homes by wildfires, habitat fragmentation, introduction of exotic species, and biodiversity decline. Our goal was to conduct a spatially detailed assessment of the...

Demographic trends, the wildland-urban interface, and wildfire management

Treesearch

Roger B. Hammer; Susan I. Stewart; Volker C. Radeloff

2009-01-01

In this article, we provide an overview of the demographic trends that have impacted and will continue to impact the "wicked" wildfire management problem in the United States, with particular attention to the emergence of the wildland-urban interface (WUI). Although population growth has had an impact on the emergence of the WUI, the deconcentration of...

How risk management can prevent future wildfire disasters in the wildland-urban interface

Treesearch

David E. Calkin; Jack D. Cohen; Mark A. Finney; Matthew P. Thompson

2014-01-01

Recent fire seasons in the western United States are some of the most damaging and costly on record. Wildfires in the wildlandurban interface on the Colorado Front Range, resulting in thousands of homes burned and civilian fatalities, although devastating, are not without historical reference. These fires are consistent with the characteristics of large, damaging,...

The wildland-urban interface in the United States

Treesearch

V.C. Radeloff; R.B. Hammer; S.I. Stewart; J.S. Fried; S.S. Holcomb; J.F. McKeefry

2005-01-01

The wildland-urban interface (WUI) is the area where houses meet or intermingle with undeveloped wildland vegetation. The WUI is thus a focal area for human-environment conflicts, such as the destruction of homes by wildfires, habitat fragmentation, introduction of exotic species, and biodiversity decline. Our goal was to conduct a spatially detailed assessment of the...

CSI computer system/remote interface unit acceptance test results

NASA Technical Reports Server (NTRS)

Sparks, Dean W., Jr.

1992-01-01

The validation tests conducted on the Control/Structures Interaction (CSI) Computer System (CCS)/Remote Interface Unit (RIU) is discussed. The CCS/RIU consists of a commercially available, Langley Research Center (LaRC) programmed, space flight qualified computer and a flight data acquisition and filtering computer, developed at LaRC. The tests were performed in the Space Structures Research Laboratory (SSRL) and included open loop excitation, closed loop control, safing, RIU digital filtering, and RIU stand alone testing with the CSI Evolutionary Model (CEM) Phase-0 testbed. The test results indicated that the CCS/RIU system is comparable to ground based systems in performing real-time control-structure experiments.

Decentralized and Modular Electrical Architecture

NASA Astrophysics Data System (ADS)

Elisabelar, Christian; Lebaratoux, Laurence

2014-08-01

This paper presents the studies made on the definition and design of a decentralized and modular electrical architecture that can be used for power distribution, active thermal control (ATC), standard inputs-outputs electrical interfaces.Traditionally implemented inside central unit like OBC or RTU, these interfaces can be dispatched in the satellite by using MicroRTU.CNES propose a similar approach of MicroRTU. The system is based on a bus called BRIO (Bus Réparti des IO), which is composed, by a power bus and a RS485 digital bus. BRIO architecture is made with several miniature terminals called BTCU (BRIO Terminal Control Unit) distributed in the spacecraft.The challenge was to design and develop the BTCU with very little volume, low consumption and low cost. The standard BTCU models are developed and qualified with a configuration dedicated to ATC, while the first flight model will fly on MICROSCOPE for PYRO actuations and analogue acquisitions. The design of the BTCU is made in order to be easily adaptable for all type of electric interface needs.Extension of this concept is envisaged for power conditioning and distribution unit, and a Modular PCDU based on BRIO concept is proposed.

Towards 3D mapping of BO₆ octahedron rotations at perovskite heterointerfaces, unit cell by unit cell

DOE PAGES

He, Qian; Ishikawa, Ryo; Lupini, Andrew R.; ...

2015-07-15

The rich functionalities in the ABO₃ perovskite oxides originate at least partly from the ability of the corner-connected BO₆ octahedral network to host a large variety of cations through distortions and rotations. Characterizing these rotations, which significantly affect both fundamental aspects of materials behavior and possible applications, remains a major challenge. In this work, we have developed a unique method of investigating BO₆ rotation patterns in complex oxides ABO₃ with unit cell resolution at heterointerfaces, where novel properties often emerge. Our method involves column shape analysis in annular bright field - scanning transmission electron microscope images of the ABO₃ heterointerfacesmore » taken in specific orientations. The rotating phase of BO₆ octahedra can be identified for all three spatial dimensions without the need of case-by-case simulation. In several common rotation systems, it is now possible to quantitatively measure all three rotation angles. With this method, we examined interfaces between perovskites with distinct tilt systems as well as interfaces between tilted and untilted perovskites, identifying an unusual coupling behavior at the CaTiO₃/LSAT interface. We believe this unique method will significantly improve our knowledge of the complex oxide heterointerfaces.« less

Software interface verifier

NASA Technical Reports Server (NTRS)

Soderstrom, Tomas J.; Krall, Laura A.; Hope, Sharon A.; Zupke, Brian S.

1994-01-01

A Telos study of 40 recent subsystem deliveries into the DSN at JPL found software interface testing to be the single most expensive and error-prone activity, and the study team suggested creating an automated software interface test tool. The resulting Software Interface Verifier (SIV), which was funded by NASA/JPL and created by Telos, employed 92 percent software reuse to quickly create an initial version which incorporated early user feedback. SIV is now successfully used by developers for interface prototyping and unit testing, by test engineers for formal testing, and by end users for non-intrusive data flow tests in the operational environment. Metrics, including cost, are included. Lessons learned include the need for early user training. SIV is ported to many platforms and can be successfully used or tailored by other NASA groups.

Anomalously deep polarization in SrTiO3 (001) interfaced with an epitaxial ultrathin manganite film

DOE PAGES

Wang, Zhen; Tao, Jing; Yu, Liping; ...

2016-10-17

Using atomically-resolved imaging and spectroscopy, we reveal a remarkably deep polarization in non-ferroelectric SrTiO 3 near its interface with an ultrathin nonmetallic film of La 2/3Sr 1/3MnO 3. Electron holography shows an electric field near the interface in SrTiO 3, yielding a surprising spontaneous polarization density of ~ 21 μC/cm 2. Combining the experimental results with first principles calculations, we propose that the observed deep polarization is induced by the electric field originating from oxygen vacancies that extend beyond a dozen unit-cells from the interface, thus providing important evidence of the role of defects in the emergent interface properties ofmore » transition metal oxides.« less

The Evaluation of Two CDU Concepts and Their Effects on FMS Training

NASA Technical Reports Server (NTRS)

Abbott, Terence S.

1995-01-01

One of the biggest challenges for a pilot in the transition to a "glass" cockpit is understanding the Flight Management System (FMS). This is due to both the complex nature of the FMS and to the pilot-FMS interface. For these reasons, a large portion of transition training is devoted to the FMS. The intent of the current study was to examine the impact of the primary pilot-FMS interface, the Control Display Unit (CDU), on FMS training. The hypothesis of this study was that the interface design could have a significant impact on training. An FMS simulation was developed with two separate interfaces. One interface was similar to a current-generation design and the other was a multi-windows CDU based on graphical user interface techniques. For both application and evaluation reasons, constraints were applied to the graphical CDU design to maintain as much similarity as possible with the conventional CDU.

The effect of two different electronic health record user interfaces on intensive care provider task load, errors of cognition, and performance.

PubMed

Ahmed, Adil; Chandra, Subhash; Herasevich, Vitaly; Gajic, Ognjen; Pickering, Brian W

2011-07-01

The care of critically ill patients generates large quantities of data. Increasingly, these data are presented to the provider within an electronic medical record. The manner in which data are organized and presented can impact on the ability of users to synthesis that data into meaningful information. The objective of this study was to test the hypothesis that novel user interfaces, which prioritize the display of high-value data to providers within system-based packages, reduce task load, and result in fewer errors of cognition compared with established user interfaces that do not. Randomized crossover study. Academic tertiary referral center. Attending, resident and fellow critical care physicians. Novel health care record user interface. Subjects randomly assigned to either a standard electronic medical record or a novel user interface, were asked to perform a structured task. The task required the subjects to use the assigned electronic environment to review the medical record of an intensive care unit patient said to be actively bleeding for data that formed the basis of answers to clinical questions posed in the form of a structured questionnaire. The primary outcome was task load, measured using the paper version of the NASA-task load index. Secondary outcome measures included time to task completion, number of errors of cognition measured by comparison of subject to post hoc gold standard questionnaire responses, and the quantity of information presented to subjects by each environment. Twenty subjects completed the task on eight patients, resulting in 160 patient-provider encounters (80 in each group). The standard electronic medical record contained a much larger data volume with a median (interquartile range) number of data points per patient of 1008 (895-1183) compared with 102 (77-112) contained within the novel user interface. The median (interquartile range) NASA-task load index values were 38.8 (32-45) and 58 (45-65) for the novel user interface compared with the standard electronic medical record (p < .001). The median (interquartile range) times in seconds taken to complete the task for four consecutive patients were 93 (57-132), 60 (48-71), 68 (48-80), and 54 (42-64) for the novel user interface compared with 145 (109-201), 125 (113-162), 129 (100-145), and 112 (92-123) for the standard interface (p < .0001), respectively. The median (interquartile range) number of errors per provider was 0.5 (0-1) and two (0.25-3) for the novel user interface and standard electronic medical record interface, respectively (p = .007). A novel user interface was designed based on the information needs of intensive care unit providers with a specific goal of development being the reduction of task load and errors of cognition associated with filtering, extracting, and using medical data contained within a comprehensive electronic medical record. The results of this simulated clinical experiment suggest that the configuration of the intensive care unit user interface contributes significantly to the task load, time to task completion, and number of errors of cognition associated with the identification, and subsequent use, of relevant patient data. Task-specific user interfaces, developed from an understanding of provider information requirements, offer advantages over interfaces currently available within a standard electronic medical record.

Databases and coordinated research projects at the IAEA on atomic processes in plasmas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Braams, Bastiaan J.; Chung, Hyun-Kyung

2012-05-25

The Atomic and Molecular Data Unit at the IAEA works with a network of national data centres to encourage and coordinate production and dissemination of fundamental data for atomic, molecular and plasma-material interaction (A+M/PMI) processes that are relevant to the realization of fusion energy. The Unit maintains numerical and bibliographical databases and has started a Wiki-style knowledge base. The Unit also contributes to A+M database interface standards and provides a search engine that offers a common interface to multiple numerical A+M/PMI databases. Coordinated Research Projects (CRPs) bring together fusion energy researchers and atomic, molecular and surface physicists for joint workmore » towards the development of new data and new methods. The databases and current CRPs on A+M/PMI processes are briefly described here.« less

Inhomogeneity at the LaAlO3/SrTiO3 interface

NASA Astrophysics Data System (ADS)

Claeson, T.; Kalabukhov, A.; Gunnarsson, R.; Winkler, D.; Borjesson, J.; Ljustina, N.; Olsson, E.; Popok, V.; Boikov, Yu.; Serenkov, I.; Sakharov, V.

2010-03-01

High electrical conductivity has been reported for the interface between two wide-band gap insulators, LaAlO3 (LAO) and SrTiO3 (STO). It occurs above a critical thickness of LAO and can be tuned by an electric field. The conduction has been attributed to i) ``polar catastrophe'' , where the electrostatic charge at the interface is compensated by the transfer of half an electron per unit cell to the interface, ii) oxygen vacancies in the STO, and iii) cation intermixing, which may result in the formation of metallic La1-xSrxTiO3 layer. The relation between microstructure and electrical properties is crucial for understanding the origin of electrical conductivity. We have investigated the interface composition using medium-energy ion spectroscopy, high resolution electron microscopy, and Kelvin probe force microscopy. We find a correlation between cationic intermixing at the interface and electrical properties and inhomogeneities of the interface conductivity that may support a percolation model. Work supported by Swedish VR & KAW, Russian ISTC 3743, EC NANOXIDE

Engineering Orthopedic Tissue Interfaces

PubMed Central

Yang, Peter J.

2009-01-01

While a wide variety of approaches to engineering orthopedic tissues have been proposed, less attention has been paid to the interfaces, the specialized areas that connect two tissues of different biochemical and mechanical properties. The interface tissue plays an important role in transitioning mechanical load between disparate tissues. Thus, the relatively new field of interfacial tissue engineering presents new challenges—to not only consider the regeneration of individual orthopedic tissues, but also to design the biochemical and cellular composition of the linking tissue. Approaches to interfacial tissue engineering may be distinguished based on if the goal is to recreate the interface itself, or generate an entire integrated tissue unit (such as an osteochondral plug). As background for future efforts in engineering orthopedic interfaces, a brief review of the biology and mechanics of each interface (cartilage–bone, ligament–bone, meniscus–bone, and muscle–tendon) is presented, followed by an overview of the state-of-the-art in engineering each tissue, including advances and challenges specific to regenerating the interfaces. PMID:19231983

Using EMBL-EBI services via Web interface and programmatically via Web Services

PubMed Central

Lopez, Rodrigo; Cowley, Andrew; Li, Weizhong; McWilliam, Hamish

2015-01-01

The European Bioinformatics Institute (EMBL-EBI) provides access to a wide range of databases and analysis tools that are of key importance in bioinformatics. As well as providing Web interfaces to these resources, Web Services are available using SOAP and REST protocols that enable programmatic access to our resources and allow their integration into other applications and analytical workflows. This unit describes the various options available to a typical researcher or bioinformatician who wishes to use our resources via Web interface or programmatically via a range of programming languages. PMID:25501941

Burgers vector content of an interfacial ledge

NASA Astrophysics Data System (ADS)

Bonnet, R.; Loubradou, M.; Pénisson, J. M.

1992-07-01

A new way of investigating the elastic field around a ledge of a faceted interface is proposed for crystalline materials. The length and/or angular misfits along two adjacent facets are accommodated by slightly deforming the atomic structural units with an appropriate distribution of translation dislocations. The Burgers vector content of the ledge is not defined as usual from a circuit crossing the interface twice, a method which proves to be sometimes misleading. An example treats, at the atomic scale, an unusual ledge of the interface TiAl/Ti3Al.

The TurboLAN project. Phase 1: Protocol choices for high speed local area networks. Phase 2: TurboLAN Intelligent Network Adapter Card, (TINAC) architecture

NASA Technical Reports Server (NTRS)

Alkhatib, Hasan S.

1991-01-01

The hardware and the software architecture of the TurboLAN Intelligent Network Adapter Card (TINAC) are described. A high level as well as detailed treatment of the workings of various components of the TINAC are presented. The TINAC is divided into the following four major functional units: (1) the network access unit (NAU); (2) the buffer management unit; (3) the host interface unit; and (4) the node processor unit.

Fully Articulating Air Bladder System (FAABS) Noise Attenuation Performance in the HGU-56/P and HGU-55/P Flight Helmets

DTIC Science & Technology

2013-10-01

EFFECTIVENESS DIRECTORATE, WRIGHT-PATTERSON AIR FORCE BASE, OH 45433 AIR FORCE MATERIEL COMMAND UNITED STATES AIR FORCE NOTICE AND SIGNATURE...Division //signed// William E. Russell, Acting Chief Warfighter Interface Division Human Effectiveness Directorate 711 Human Performance...Wing Human Effectiveness Directorate Warfighter Interface Division Battlespace Acoustics Branch Wright-Patterson AFB OH 45433

PDSS/IMC CIS user's guide

NASA Technical Reports Server (NTRS)

1984-01-01

The Spacelab Payload Development Support System PDSS Image Motion Compensator (IMC) computer interface simulation (CIS) user's manual is given. The software provides a real time interface simulation for the following IMC subsystems: the Dry Rotor Reference Unit, the Advanced Star/Target Reference Optical sensor, the Ultra Violet imaging telescope, the Wisconson Ultraviolet Photopolarimetry Experiment, the Cruciform Power distributor, and the Spacelab Experiment Computer Operating System.

Comparing production function models for wildfire risk analysis in the wildland-urban interface

Treesearch

D. Evan Mercer; Jeffrey P. Prestemon

2005-01-01

Wildfires create damages in the wildland-urban interface (WUI) that total hundreds of millions of dollars annually in the United States. Understanding how fires are produced in built-up areas near and within fire prone landscapes requires evaluating and quantifling the roles that humans play in fire regimes. We outline a typology of wildfire production functions (WPFs...

User interface customization on Endoscopy Department Mini-PACS and its impact on examination workflow

NASA Astrophysics Data System (ADS)

Osada, Masakazu; Kaise, Mitsuru; Ozeki, Takeshi; Tsunakawa, Hirofumi; Tsunakawa, Kiyoshi; Takayanagi, Takashi; Suzuki, Nobuaki; Miwa, Jun; Ohta, Yasuhiko; Kanai, Koichi

1999-07-01

We have proposed a new user interface with workflow customization, implemented and evaluted in Endoscopy Department Mini-PACS that has been introduced and routinely used for two years at Toshiba General Hospital. We have set some task at endoscopy image acquisition units during examinations for two different types of user interfaces and compared performance. One is a command-button based operation using a remote control, and another is that with eight graphic buttons which are displayed on a CRT monitor and can be customized. Results of the two-year study show that mean number of input diagnosis codes per examination with graphic and customized interface is significantly greater than that with conventional interface. Also, mean time to complete one upper gastric endoscopy examination with new user interface is about 17 percent less than that with conventional interface. These result suggest that systems with the visualized and customized operation and feedback encourages physicians to use more functions and to compete tasks more efficiently than systems with conventional command-button based user interfaces.

A universal data access and protocol integration mechanism for smart home

NASA Astrophysics Data System (ADS)

Shao, Pengfei; Yang, Qi; Zhang, Xuan

2013-03-01

With the lack of standardized or completely missing communication interfaces in home electronics, there is no perfect solution to address every aspect in smart homes based on existing protocols and technologies. In addition, the central control unit (CCU) of smart home system working point-to-point between the multiple application interfaces and the underlying hardware interfaces leads to its complicated architecture and unpleasant performance. A flexible data access and protocol integration mechanism is required. The current paper offers a universal, comprehensive data access and protocol integration mechanism for a smart home. The universal mechanism works as a middleware adapter with unified agreements of the communication interfaces and protocols, offers an abstraction of the application level from the hardware specific and decoupling the hardware interface modules from the application level. Further abstraction for the application interfaces and the underlying hardware interfaces are executed based on adaption layer to provide unified interfaces for more flexible user applications and hardware protocol integration. This new universal mechanism fundamentally changes the architecture of the smart home and in some way meets the practical requirement of smart homes more flexible and desirable.

Mechanisms of charge transfer and redistribution in LaAlO3/SrTiO3 revealed by high-energy optical conductivity.

PubMed

Asmara, T C; Annadi, A; Santoso, I; Gogoi, P K; Kotlov, A; Omer, H M; Motapothula, M; Breese, M B H; Rübhausen, M; Venkatesan, T; Ariando; Rusydi, A

2014-04-14

In condensed matter physics the quasi two-dimensional electron gas at the interface of two different insulators, polar LaAlO3 on nonpolar SrTiO3 (LaAlO3/SrTiO3) is a spectacular and surprising observation. This phenomenon is LaAlO3 film thickness dependent and may be explained by the polarization catastrophe model, in which a charge transfer of 0.5e(-) from the LaAlO3 film into the LaAlO3/SrTiO3 interface is expected. Here we show that in conducting samples (≥ 4 unit cells of LaAlO3) there is indeed a ~0.5e(-) transfer from LaAlO3 into the LaAlO3/SrTiO3 interface by studying the optical conductivity in a broad energy range (0.5-35 eV). Surprisingly, in insulating samples (≤ 3 unit cells of LaAlO3) a redistribution of charges within the polar LaAlO3 sublayers (from AlO2 to LaO) as large as ~0.5e(-) is observed, with no charge transfer into the interface. Hence, our results reveal the different mechanisms for the polarization catastrophe compensation in insulating and conducting LaAlO3/SrTiO3 interfaces.

A new variable temperature solution-solid interface scanning tunneling microscope.

PubMed

Jahanbekam, Abdolreza; Mazur, Ursula; Hipps, K W

2014-10-01

We present a new solution-solid (SS) interface scanning tunneling microscope design that enables imaging at high temperatures with low thermal drift and with volatile solvents. In this new design, distinct from the conventional designs, the entire microscope is surrounded in a controlled-temperature and controlled-atmosphere chamber. This allows users to take measurements at high temperatures while minimizing thermal drift. By incorporating an open solution reservoir in the chamber, solvent evaporation from the sample is minimized; allowing users to use volatile solvents for temperature dependent studies at high temperatures. The new design enables the user to image at the SS interface with some volatile solvents for long periods of time (>24 h). An increase in the nonlinearity of the piezoelectric scanner in the lateral direction as a function of temperature is addressed. A temperature dependent study of cobalt(II) octaethylporphyrin (CoOEP) at the toluene/Au(111) interface has been performed with this instrument. It is demonstrated that the lattice parameters remain constant within experimental error from 24 °C to 75 °C. Similar quality images were obtained over the entire temperature range. We report the unit cell of CoOEP at the toluene/Au(111) interface (based on two molecules per unit cell) to be A = (1.36 ± 0.04) nm, B = (2.51 ± 0.04) nm, and α = 97° ± 2°.

Plug-and-Play Environmental Monitoring Spacecraft Subsystem

NASA Technical Reports Server (NTRS)

Patel, Jagdish; Brinza, David E.; Tran, Tuan A.; Blaes, Brent R.

2011-01-01

A Space Environment Monitor (SEM) subsystem architecture has been developed and demonstrated that can benefit future spacecraft by providing (1) real-time knowledge of the spacecraft state in terms of exposure to the environment; (2) critical, instantaneous information for anomaly resolution; and (3) invaluable environmental data for designing future missions. The SEM architecture consists of a network of plug-and- play (PnP) Sensor Interface Units (SIUs), each servicing one or more environmental sensors. The SEM architecture is influenced by the IEEE Smart Transducer Interface Bus standard (IEEE Std 1451) for its PnP functionality. A network of PnP Spacecraft SIUs is enabling technology for gathering continuous real-time information critical to validating spacecraft health in harsh space environments. The demonstrated system that provided a proof-of-concept of the SEM architecture consisted of three SIUs for measurement of total ionizing dose (TID) and single event upset (SEU) radiation effects, electromagnetic interference (EMI), and deep dielectric charging through use of a prototype Internal Electro-Static Discharge Monitor (IESDM). Each SIU consists of two stacked 2X2 in. (approximately 5X5 cm) circuit boards: a Bus Interface Unit (BIU) board that provides data conversion, processing and connection to the SEM power-and-data bus, and a Sensor Interface Electronics (SIE) board that provides sensor interface needs and data path connection to the BIU.

Hydration of protein–RNA recognition sites

PubMed Central

Barik, Amita; Bahadur, Ranjit Prasad

2014-01-01

We investigate the role of water molecules in 89 protein–RNA complexes taken from the Protein Data Bank. Those with tRNA and single-stranded RNA are less hydrated than with duplex or ribosomal proteins. Protein–RNA interfaces are hydrated less than protein–DNA interfaces, but more than protein–protein interfaces. Majority of the waters at protein–RNA interfaces makes multiple H-bonds; however, a fraction do not make any. Those making H-bonds have preferences for the polar groups of RNA than its partner protein. The spatial distribution of waters makes interfaces with ribosomal proteins and single-stranded RNA relatively ‘dry’ than interfaces with tRNA and duplex RNA. In contrast to protein–DNA interfaces, mainly due to the presence of the 2′OH, the ribose in protein–RNA interfaces is hydrated more than the phosphate or the bases. The minor groove in protein–RNA interfaces is hydrated more than the major groove, while in protein–DNA interfaces it is reverse. The strands make the highest number of water-mediated H-bonds per unit interface area followed by the helices and the non-regular structures. The preserved waters at protein–RNA interfaces make higher number of H-bonds than the other waters. Preserved waters contribute toward the affinity in protein–RNA recognition and should be carefully treated while engineering protein–RNA interfaces. PMID:25114050

Usability and Functional Enhancements to an Online Interface for Predicting Post Fire Erosion (WEPP-PEP)

NASA Astrophysics Data System (ADS)

Lew, Roger; Dobre, Mariana; Elliot, William; Robichaud, Pete; Brooks, Erin; Frankenberger, Jim

2017-04-01

There is an increased interest in the United States to use soil burn severity maps in watershed-scale hydrologic models to estimate post-fire sediment erosion from burned areas. This information is needed by stakeholders in order to concentrate their pre- or post-fire management efforts in ecologically sensitive areas to decrease the probability of post-fire sediment delivery. But these tools traditionally have been time consuming and difficult to use by managers because input datasets must be obtained and correctly processed for valid results. The Water Erosion Prediction Project (WEPP) has previously been developed as an online and easy-to-use interface to help land managers with running simulations without any knowledge of computer programming or hydrologic modeling. The interface automates the acquisition of DEM, climate, soils, and landcover data, and also automates channel and hillslope delineation for the users. The backend is built with Mapserver, GDAL, PHP, C++, Python while the front end uses OpenLayers, and, of course, JavaScript. The existing WEPP online interface was enhanced to provide better usability to stakeholders in United States (Forest Service, BLM, USDA) as well as to provide enhanced functionality for managing both pre-fire and post-fire treatments. Previously, only site administrators could add burn severity maps. The interface now allows users to create accounts to upload and share FlamMap prediction maps, differenced Normalized Burned Ratio (dNBR), or Burned Area Reflectance Classification (BARC) maps. All maps are loaded into a sortable catalog so users can quickly find their area of interest. Once loaded, the interface has been modified to support running comparisons between baseline condition with "no burn" and with a burn severity classification map. The interface has also been enhanced to allow users to conduct single storm analyses to examine, for example, how much soil loss would result after a 100-year storm. An OpenLayers map allows users to overlay the watershed hillslopes and channels, burn severity, and erosion. The interface provides flowpath results for each hillslope and at the outlet, as well as return period and frequency analysis reports. Once problematic areas have been identified, the interface allows users to export the watershed in a format that can be used by the Erosion Risk Management Tool (ERMiT) and Disturbed WEPP (post-disturbance modeling) for more detailed hillslope-level analyses. Numerous other changes were made to improve the overall usability of the interface: allow simulations in both SI and English units, added immovable pop-up dialogs to guide the users, and removed extraneous information from the interface. In upcoming months, a workshop will be conducted to demonstrate these new capabilities to stakeholders. Efforts are underway to use site-specific SSURGO soils to that are modified based on burn severity rather than using generic soil classes.

Specific interface area in a thin layer system of two immiscible liquids with vapour generation at the contact interface

NASA Astrophysics Data System (ADS)

Pimenova, Anastasiya V.; Gazdaliev, Ilias M.; Goldobin, Denis S.

2017-06-01

For well-stirred multiphase fluid systems the mean interface area per unit volume, or “specific interface area” SV, is a significant characteristic of the system state. In particular, it is important for the dynamics of systems of immiscible liquids experiencing interfacial boiling. We estimate the value of parameter SV as a function of the heat influx {\\dot{Q}}V to the system or the average system overheat <Θ> above the interfacial boiling point. The derived results can be reformulated for the case of an endothermic chemical reaction between two liquid reagents with the gaseous form of one of the reaction products. The final results are restricted to the case of thin layers, where the potential gravitational energy of bubbles leaving the contact interface is small compared to their surface tension energy.

User productivity as a function of AutoCAD interface design.

PubMed

Mitta, D A; Flores, P L

1995-12-01

Increased operator productivity is a desired outcome of user-CAD interaction scenarios. Two objectives of this research were to (1) define a measure of operator productivity and (2) empirically investigate the potential effects of CAD interface design on operator productivity, where productivity is defined as the percentage of a drawing session correctly completed per unit time. Here, AutoCAD provides the CAD environment of interest. Productivity with respect to two AutoCAD interface designs (menu, template) and three task types (draw, dimension, display) was investigated. Analysis of user productivity data revealed significantly higher productivity under the menu interface condition than under the template interface condition. A significant effect of task type was also discovered, where user productivity under display tasks was higher than productivity under the draw and dimension tasks. Implications of these results are presented.

Toward a formal verification of a floating-point coprocessor and its composition with a central processing unit

NASA Technical Reports Server (NTRS)

Pan, Jing; Levitt, Karl N.; Cohen, Gerald C.

1991-01-01

Discussed here is work to formally specify and verify a floating point coprocessor based on the MC68881. The HOL verification system developed at Cambridge University was used. The coprocessor consists of two independent units: the bus interface unit used to communicate with the cpu and the arithmetic processing unit used to perform the actual calculation. Reasoning about the interaction and synchronization among processes using higher order logic is demonstrated.

In vivo imaging of the neurovascular unit in CNS disease

PubMed Central

Merlini, Mario; Davalos, Dimitrios; Akassoglou, Katerina

2014-01-01

The neurovascular unit—comprised of glia, pericytes, neurons and cerebrovasculature—is a dynamic interface that ensures physiological central nervous system (CNS) functioning. In disease dynamic remodeling of the neurovascular interface triggers a cascade of responses that determine the extent of CNS degeneration and repair. The dynamics of these processes can be adequately captured by imaging in vivo, which allows the study of cellular responses to environmental stimuli and cell-cell interactions in the living brain in real time. This perspective focuses on intravital imaging studies of the neurovascular unit in stroke, multiple sclerosis (MS) and Alzheimer disease (AD) models and discusses their potential for identifying novel therapeutic targets. PMID:25197615

Post-Wildfire Hydrologic Hazards in the Wildland Urban Interface of Colorado and the Western United States

USGS Publications Warehouse

Stevens, M.R.; Bossong, C.R.; Rupert, M.G.; Ranalli, A.J.; Cassidy, E.W.; Druliner, A.D.

2008-01-01

Following a wildfire, such as the 2002 Missionary Ridge fire, a number of hydrologic hazards may develop that can have an important impact on water resources, businesses, homes, reservoirs, roads, and utilities in the wildland urban interface (areas where homes and commercial developments are interspersed with wildlands) in mountainous areas of the Western United States. This fact sheet describes these hazards and identifies approaches to quantify them, thus enabling land and resource managers to plan for and mitigate the effects of these hazards. The fact sheet has been produced in association with the U.S. Geological Survey (USGS) Fire Science Thrust program and the Colorado Front Range Demonstration Project (CFRDP). The current (2007) focus of the CFRDP is on the Three Lakes watershed in Grand County, Colorado, which has applicability to many similar forested, mountain areas in the Western United States.

Ground Operations Aerospace Language (GOAL). Volume 3: Data bank

NASA Technical Reports Server (NTRS)

1973-01-01

The GOAL (Ground Operations Aerospace Language) test programming language was developed for use in ground checkout operations in a space vehicle launch environment. To insure compatibility with a maximum number of applications, a systematic and error-free method of referencing command/response (analog and digital) hardware measurements is a principle feature of the language. Central to the concept of requiring the test language to be independent of launch complex equipment and terminology is that of addressing measurements via symbolic names that have meaning directly in the hardware units being tested. To form the link from test program through test system interfaces to the units being tested the concept of a data bank has been introduced. The data bank is actually a large cross-reference table that provides pertinent hardware data such as interface unit addresses, data bus routings, or any other system values required to locate and access measurements.

Design of video interface conversion system based on FPGA

NASA Astrophysics Data System (ADS)

Zhao, Heng; Wang, Xiang-jun

2014-11-01

This paper presents a FPGA based video interface conversion system that enables the inter-conversion between digital and analog video. Cyclone IV series EP4CE22F17C chip from Altera Corporation is used as the main video processing chip, and single-chip is used as the information interaction control unit between FPGA and PC. The system is able to encode/decode messages from the PC. Technologies including video decoding/encoding circuits, bus communication protocol, data stream de-interleaving and de-interlacing, color space conversion and the Camera Link timing generator module of FPGA are introduced. The system converts Composite Video Broadcast Signal (CVBS) from the CCD camera into Low Voltage Differential Signaling (LVDS), which will be collected by the video processing unit with Camera Link interface. The processed video signals will then be inputted to system output board and displayed on the monitor.The current experiment shows that it can achieve high-quality video conversion with minimum board size.

The Counter Terrorist Classroom: Religion, Education, and Security

ERIC Educational Resources Information Center

Gearon, Liam

2013-01-01

The article identifies international cases--from the United States, Europe, and the United Nations--of an emergent interface of religion, education, and security. This is manifest in the uses of religion in education to counter religious extremism, the notional "counter terrorist classroom." To avoid an over-association of extremism with…

Introduction

Treesearch

Deborah J. Chavez; Patricia C. Winter; James D. Absher

2008-01-01

In 1987, the Pacific Southwest Research Station (PSW) of the U.S. Department of Agriculture, Forest Service (USFS), chartered a research work unit to examine outdoor recreation in the wildland-urban interface. The need for the work unit was identified by the four forest supervisors in southern California, from the Angeles National Forest, the Cleveland National Forest...

Demographic trends in the Eastern US and the wildland urban interface: implications for fire management

Treesearch

John Stanturf; Michael C. Wimberly

2013-01-01

Over the last century, the United States has evolved from a predominantly rural to an urbanized society with an exurban area currently referred to as the wildland urban interface (WUI). This WUI is critical as it occupies three to five times as much land area as urban areas with emerging and latent conflicts between traditional resource management and preferences of...

Alternative Indices of Performance: An Exploration of Eye Gaze Metrics in a Visual Puzzle Task

DTIC Science & Technology

2014-07-01

strategy in which participants anchor their search on pieces in the correct positions results. Although there were significant effects for both...PERFORMANCE WING, HUMAN EFFECTIVENESS DIRECTORATE, WRIGHT-PATTERSON AIR FORCE BASE, OH 45433 AIR FORCE MATERIEL COMMAND UNITED STATES AIR FORCE...Interface Division //signed// WILLIAM E. RUSSELL Chief, Warfighter Interface Division Human Effectiveness Directorate 711 Human Performance

Alpine Serpentinite Geochemistry As Key To Define Timing Of Oceanic Lithosphere Accretion To The Subduction Plate Interface

NASA Astrophysics Data System (ADS)

Gilio, M.; Scambelluri, M.; Agostini, S.; Godard, M.; Pettke, D. T.; Angiboust, S.

2016-12-01

Isotopic (Pb, Sr and B) and trace element (B, Be, As, Sb, U, Th) signatures of serpentinites are useful geochemical tools to assess element exchange and fluid-rock interactions in subduction zone settings. They help to unravel geological history and tectonic evolution of subduction serpentinites and associated meta-oceanic crust. Sedimentary-derived fluid influx within HP plate interface environments strongly enriches serpentinites in As, Sb, B, U and Th and resets their B, Sr and Pb isotopic compositions. This HP metasomatic signature is preserved during exhumation and/or released at higher PT through de-serpentinization, fueling partial melting in the sub-arc mantle and recycling such fingerprint into arc magmas. This study focuses on the subduction recrystallization, geochemical diversity and fluid-rock interaction recorded by high- to ultra-high pressure (HP, UHP) Alpine serpentinites from the subducted oceanic plate (Cignana Unit, Zermatt-Saas Complex, Monviso and Lanzo Ultramafic Massifs). The As and Sb compositions of the HP-UHP Alpine ophiolitic rocks reveal the interaction between serpentinite and crust-derived fluids during their emplacement along the plate interface. This enables to define a hypothetical architecture of the Alpine subduction interface, considering large ultramafic slices. In this scenario, the Lanzo peridotite and serpentinite retain an As-Sb composition comparable to DM and PM: i.e. they experienced little exchange with sediment-derived fluids. Lanzo thus belonged to sections of the subducting plate, afar from the plate interface. Serpentinites from the Lago di Cignana Unit and Monviso and Voltri are richer in As and Sb, showing moderate to strong interaction with sediment- and crust-derived fluids during subduction (i.e. they behaved as open systems). These serpentinite slices accreted at the plate interface and exchanged with slab-derived fluids at different depths during Alpine subduction: Voltri accreted at shallower conditions (50-60 km) than Monviso Unit (around 80 km depth) and Lago di Cignana (about 100 km depth), and exchanged with sedimentary and crustal systems during the entire burial history. Their relatively lower density might act as buoyancy force, triggering the exhumation of much denser lithologies (eclogite and peridotite).

Microprocessor-based integration of microfluidic control for the implementation of automated sensor monitoring and multithreaded optimization algorithms.

PubMed

Ezra, Elishai; Maor, Idan; Bavli, Danny; Shalom, Itai; Levy, Gahl; Prill, Sebastian; Jaeger, Magnus S; Nahmias, Yaakov

2015-08-01

Microfluidic applications range from combinatorial synthesis to high throughput screening, with platforms integrating analog perfusion components, digitally controlled micro-valves and a range of sensors that demand a variety of communication protocols. Currently, discrete control units are used to regulate and monitor each component, resulting in scattered control interfaces that limit data integration and synchronization. Here, we present a microprocessor-based control unit, utilizing the MS Gadgeteer open framework that integrates all aspects of microfluidics through a high-current electronic circuit that supports and synchronizes digital and analog signals for perfusion components, pressure elements, and arbitrary sensor communication protocols using a plug-and-play interface. The control unit supports an integrated touch screen and TCP/IP interface that provides local and remote control of flow and data acquisition. To establish the ability of our control unit to integrate and synchronize complex microfluidic circuits we developed an equi-pressure combinatorial mixer. We demonstrate the generation of complex perfusion sequences, allowing the automated sampling, washing, and calibrating of an electrochemical lactate sensor continuously monitoring hepatocyte viability following exposure to the pesticide rotenone. Importantly, integration of an optical sensor allowed us to implement automated optimization protocols that require different computational challenges including: prioritized data structures in a genetic algorithm, distributed computational efforts in multiple-hill climbing searches and real-time realization of probabilistic models in simulated annealing. Our system offers a comprehensive solution for establishing optimization protocols and perfusion sequences in complex microfluidic circuits.

Human-Computer Interface Controlled by Horizontal Directional Eye Movements and Voluntary Blinks Using AC EOG Signals

NASA Astrophysics Data System (ADS)

Kajiwara, Yusuke; Murata, Hiroaki; Kimura, Haruhiko; Abe, Koji

As a communication support tool for cases of amyotrophic lateral sclerosis (ALS), researches on eye gaze human-computer interfaces have been active. However, since voluntary and involuntary eye movements cannot be distinguished in the interfaces, their performance is still not sufficient for practical use. This paper presents a high performance human-computer interface system which unites high quality recognitions of horizontal directional eye movements and voluntary blinks. The experimental results have shown that the number of incorrect inputs is decreased by 35.1% in an existing system which equips recognitions of horizontal and vertical directional eye movements in addition to voluntary blinks and character inputs are speeded up by 17.4% from the existing system.

Optimising non-invasive mechanical ventilation: Which unit should care for these patients? A cohort study.

PubMed

Raurell-Torredà, Marta; Argilaga-Molero, E; Colomer-Plana, M; Ródenas-Fransico, A; Ruiz-Garcia, M T; Uya Muntaña, J

2017-07-01

Use of noninvasive ventilation (NIV) has extended beyond intensive care units (ICUs), becoming usual practice in emergency departments (EDs) and general wards. To analyse the relationship between nursing care and NIV outcome in different hospital units. Three university hospitals and one community hospital participated in a prospective observational cohort study. Ten units participated: 4 ICUs (1 surgical, 3 medical-surgical), 3 recovery (1 postsurgical, 2 EDs, 3 general wards). Treatment success/failure, interface intolerance and complications were evaluated according to patient characteristics, nursing care provided, and procedures used. Complications analysed included bronchoaspiration, pneumothorax, skin lesions, inability to manage secretions, eye irritations, deteriorating level of consciousness, gastric distension, and excessive air losses around the mask. Of 387 patients, 194 (50.1%) were treated in ICU, 121 (31.3%) in ED, 38 (9.8%) postsurgery, and 34 (8.8%) in general wards. Regression analysis, adjusted for APACHE score and NIV indication, showed 3.3 times greater risk of NIV failure (95% CI [1.2-9.2]) in a university-hospital ICU with <50 NIV cases/year, compared to a community hospital ICU. In ICUs and general wards, NIV was suspended in 12% of patients due to interface intolerance. Acute-on-chronic lung diseases (ACLD) had lower risk of NIV failure (OR 0.2 [95% CI 0.06-0.69]) and lack of humidification was not associated with treatment failure (OR 0.2 [95% CI 0.1-0.4]). Poor secretion management was linked to pneumonia (OR 2.5 [95% CI 1.1-5.9]) and early weaning/extubation (OR 3.3 [95% CI 1.2-8.9]). Interface intolerance was associated with conventional ICU ventilators (OR 4.4 [95% CI 2.1-9.2]) and nasal skin lesions with excessive air losses (OR 2.4 [95% CI 1.1-5.3]), especially with oronasal masks (OR 3.5 [95% CI 1.1-11.3]). Acute respiratory failure patients with pneumonia admitted to general wards had increased interface intolerance and NIV failure. Rotating mask types could improve NIV success in any unit administering this therapy. Copyright © 2016 Australian College of Critical Care Nurses Ltd. Published by Elsevier Ltd. All rights reserved.

Integrated Information Support System (IISS). Volume 8. User Interface Subsystem. Part 14. Virtual Terminal Unit Test Plan

DTIC Science & Technology

1990-09-30

Dynamics Research Corporation: Jones, L.. Glandorf, F. 3a. TYPE OF REPORT 113b. TIME COVERED 114. DATE OF REPORT (Yr.,Mo..Day) 15. PAGE COUNT Final...specific software modules written for each type of real terminal supported. Virtual Terminal Interface: the callable interface to the Virtual Terminal...2000;60000;2;0;100;100;5000;0;0;0;0;0;10 "v-Testing2- DVF - View Fill Area: <ESC>[5;1;2000;50000;20000;30000;20000;50000; 2000;30000&v DVM - View Markers: <ESC

Using EMBL-EBI Services via Web Interface and Programmatically via Web Services.

PubMed

Lopez, Rodrigo; Cowley, Andrew; Li, Weizhong; McWilliam, Hamish

2014-12-12

The European Bioinformatics Institute (EMBL-EBI) provides access to a wide range of databases and analysis tools that are of key importance in bioinformatics. As well as providing Web interfaces to these resources, Web Services are available using SOAP and REST protocols that enable programmatic access to our resources and allow their integration into other applications and analytical workflows. This unit describes the various options available to a typical researcher or bioinformatician who wishes to use our resources via Web interface or programmatically via a range of programming languages. Copyright © 2014 John Wiley & Sons, Inc.

Layer-by-Layer Evolution of a Two-Dimensional Electron Gas Near an Oxide Interface

NASA Astrophysics Data System (ADS)

Chang, Young Jun; Moreschini, Luca; Bostwick, Aaron; Gaines, Geoffrey A.; Kim, Yong Su; Walter, Andrew L.; Freelon, Byron; Tebano, Antonello; Horn, Karsten; Rotenberg, Eli

2013-09-01

We report the momentum-resolved measurement of a two-dimensional electron gas at the LaTiO3/SrTiO3 interface by angle-resolved photoemission spectroscopy (ARPES). Thanks to an advanced sample preparation technique, the orbital character of the conduction electrons and the electronic correlations can be accessed quantitatively as each unit cell layer is added. We find that all of these quantities change dramatically with distance from the interface. These findings open the way to analogous studies on other heterostructures, which are traditionally a forbidden field for ARPES.

A PDP-15 to industrial-14 interface at the Lewis Research Center's cyclotron

NASA Technical Reports Server (NTRS)

Kebberly, F. R.; Leonard, R. F.

1977-01-01

An interface (hardware and software) was built which permits the loading, monitoring, and control of a digital equipment industrial-14/30 programmable controller by a PDP-15 computer. The interface utilizes the serial mode for data transfer to and from the controller, so that the required hardware is essentially that of a teletype unit except for the speed of transmission. Software described here permits the user to load binary paper tape, read or load individual controller memory locations, and if desired turn controller outputs on and off directly from the computer.

HAL/SM system functional design specification. [systems analysis and design analysis of central processing units

NASA Technical Reports Server (NTRS)

Ross, C.; Williams, G. P. W., Jr.

1975-01-01

The functional design of a preprocessor, and subsystems is described. A structure chart and a data flow diagram are included for each subsystem. Also a group of intermodule interface definitions (one definition per module) is included immediately following the structure chart and data flow for a particular subsystem. Each of these intermodule interface definitions consists of the identification of the module, the function the module is to perform, the identification and definition of parameter interfaces to the module, and any design notes associated with the module. Also described are compilers and computer libraries.

Service offerings and interfaces for the ACTS network of Earth stations

NASA Technical Reports Server (NTRS)

Coney, Thom A.

1988-01-01

The Advanced Communications Satellite (ACTS) is capable of two modes of communication. Mode 1 is a mesh network of Earth stations using baseband-switched, time-division multiple-access (BBS-TDMA) and hopping beams. Mode 2 is a mesh network using satellite-switched, time-division multiple-access (SS-TDMA) and fixed (or hopping) beams. The purpose of this paper is to present the functional requirements and the design of the ACTS Mode 1 Earth station terrestrial interface. Included among the requirements are that: (1) the interface support standard telecommunications service offerings (i.e., voice, video and data at rates ranging from 9.6 kbps to 44 Mbps); (2) the interface support the unique design characteristics of the ACTS communications systems (e.g., the real time demand assignment of satellite capacity); and (3) the interface support test hardware capable of validating ACTS communications processes. The resulting interface design makes use of an appropriate combination of T1 or T3 multiplexers and a small central office (maximum capacity 56 subscriber lines per unit).

Interface of the transport systems research vehicle monochrome display system to the digital autonomous terminal access communication data bus

NASA Technical Reports Server (NTRS)

Easley, W. C.; Tanguy, J. S.

1986-01-01

An upgrade of the transport systems research vehicle (TSRV) experimental flight system retained the original monochrome display system. The original host computer was replaced with a Norden 11/70, a new digital autonomous terminal access communication (DATAC) data bus was installed for data transfer between display system and host, while a new data interface method was required. The new display data interface uses four split phase bipolar (SPBP) serial busses. The DATAC bus uses a shared interface ram (SIR) for intermediate storage of its data transfer. A display interface unit (DIU) was designed and configured to read from and write to the SIR to properly convert the data from parallel to SPBP serial and vice versa. It is found that separation of data for use by each SPBP bus and synchronization of data tranfer throughout the entire experimental flight system are major problems which require solution in DIU design. The techniques used to accomplish these new data interface requirements are described.

THOR Field and Wave Processor - FWP

NASA Astrophysics Data System (ADS)

Soucek, Jan; Rothkaehl, Hanna; Balikhin, Michael; Zaslavsky, Arnaud; Nakamura, Rumi; Khotyaintsev, Yuri; Uhlir, Ludek; Lan, Radek; Yearby, Keith; Morawski, Marek; Winkler, Marek

2016-04-01

If selected, Turbulence Heating ObserveR (THOR) will become the first mission ever flown in space dedicated to plasma turbulence. The Fields and Waves Processor (FWP) is an integrated electronics unit for all electromagnetic field measurements performed by THOR. FWP will interface with all fields sensors: electric field antennas of the EFI instrument, the MAG fluxgate magnetometer and search-coil magnetometer (SCM) and perform data digitization and on-board processing. FWP box will house multiple data acquisition sub-units and signal analyzers all sharing a common power supply and data processing unit and thus a single data and power interface to the spacecraft. Integrating all the electromagnetic field measurements in a single unit will improve the consistency of field measurement and accuracy of time synchronization. The feasibility of making highly sensitive electric and magnetic field measurements in space has been demonstrated by Cluster (among other spacecraft) and THOR instrumentation complemented by a thorough electromagnetic cleanliness program will further improve on this heritage. Taking advantage of the capabilities of modern electronics, FWP will provide simultaneous synchronized waveform and spectral data products at high time resolution from the numerous THOR sensors, taking advantage of the large telemetry bandwidth of THOR. FWP will also implement a plasma a resonance sounder and a digital plasma quasi-thermal noise analyzer designed to provide high cadence measurements of plasma density and temperature complementary to data from particle instruments. FWP will be interfaced with the particle instrument data processing unit (PPU) via a dedicated digital link which will enable performing on board correlation between waves and particles, quantifying the transfer of energy between waves and particles. The FWP instrument shall be designed and built by an international consortium of scientific institutes from Czech Republic, Poland, France, UK, Sweden and Austria.

Pressurization of a Flightweight, Liquid Hydrogen Tank: Evaporation & Condensation at a Liquid/Vapor Interface

NASA Technical Reports Server (NTRS)

Stewart, Mark E. M.

2017-01-01

This paper presents an analysis and simulation of evaporation and condensation at a motionless liquid/vapor interface. A 1-D model equation, emphasizing heat and mass transfer at the interface, is solved in two ways, and incorporated into a subgrid interface model within a CFD simulation. Simulation predictions are compared with experimental data from the CPST Engineering Design Unit tank, a cryogenic fluid management test tank in 1-g. The numerical challenge here is the physics of the liquid/vapor interface; pressurizing the ullage heats it by several degrees, and sets up an interfacial temperature gradient that transfers heat to the liquid phase-the rate limiting step of condensation is heat conducted through the liquid and vapor. This physics occurs in thin thermal layers O(1 mm) on either side of the interface which is resolved by the subgrid interface model. An accommodation coefficient of 1.0 is used in the simulations which is consistent with theory and measurements. This model is predictive of evaporation/condensation rates, that is, there is no parameter tuning.

Symmetry and lattice mismatch induced strain accommodation near and away from correlated perovskite interfaces

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vailionis, A.; Boschker, H.; Max Planck Institute for Solid State Research, 70569 Stuttgart

2014-09-29

Distinct MnO{sub 6} octahedral distortions near and away from the La{sub 0.67}Sr{sub 0.33}MnO{sub 3}/SrTiO{sub 3}(001) (LSMO/STO) interface are quantified using synchrotron x-ray diffraction and dynamical x-ray diffraction simulations. Three structural regions of stress accommodation throughout the film thickness were resolved: near the LSMO/STO interface, intermediate region farther from the interface, and the main layer away from the interface. The results show that within the first two unit cells stress is accommodated by the suppression of octahedral rotations in the film, leading to the expansion of the c-axis lattice parameter. Farther from the interface film structure acquires octahedral tilts similar tomore » thicker perovskite films under tensile stress, leading to a reduced c-axis parameter. We demonstrate that these regions are related to two different strain coupling mechanisms: symmetry mismatch at the interface and lattice mismatch in the rest of the film. The findings suggest new routes for strain engineering in correlated perovskite heterostructures.« less

Searching the Sinus Amoris: Using profiles of geological units, impact and volcanic features to characterize a major terrane interface on the Moon

NASA Technical Reports Server (NTRS)

Clark, P.; Joerg, S.; Dehon, R.

1994-01-01

Geochemical profiles of surface units, impact, and volcanic features are studied in detail to determine the underlying structure in an area of extensive mare/highland interface, Sinus Amoris. This study region includes and surrounds the northeastern embayment of Mare Tranquillitatis. The concentrations of two major rock-forming elements (Mg and Al), which were derived from the Apollo 15 orbital geochemical measurements, were used in this study. Mapped units and deposits associated with craters in the northwestern part of the region tend to have correlated low Mg and Al concentrations, indicating the presence of Potassium (K)-Rare Earth Elements (REE)-Phosphorus (P) (KREEP)-enriched basalt. Found along the northeastern rim of Tranquillitatis were areas with correlated high Mg and Al concentration, indicating the presence of troctolite. Distinctive west/east and north/south trends were observed in the concentrations of Mg and Al, and, by implication, in the distribution of major rock components on the surface. Evidence for a systematic geochemical transition in highland or basin-forming units may be observed here in the form of distinctive differences in chemistry in otherwise similar units in the western and eastern portions of the study region.

Proteins at the air-water interface in a lattice model

NASA Astrophysics Data System (ADS)

Zhao, Yani; Cieplak, Marek

2018-03-01

We construct a lattice protein version of the hydrophobic-polar model to study the effects of the air-water interface on the protein and on an interfacial layer formed through aggregation of many proteins. The basic unit of the model is a 14-mer that is known to have a unique ground state in three dimensions. The equilibrium and kinetic properties of the systems with and without the interface are studied through a Monte Carlo process. We find that the proteins at high dilution can be pinned and depinned many times from the air-water interface. When pinned, the proteins undergo deformation. The staying time depends on the strength of the coupling to the interface. For dense protein systems, we observe glassy effects. Thus, the lattice model yields results which are similar to those obtained through molecular dynamics in off-lattice models. In addition, we study dynamical effects induced by local temperature gradients in protein films.

Blasting, graphical interfaces and Unix

DOE Office of Scientific and Technical Information (OSTI.GOV)

Knudsen, S.; Preece, D.S.

1993-11-01

A discrete element computer program, DMC (Distinct Motion Code) was developed to simulate blast-induced rock motion. To simplify the complex task of entering material and explosive design parameters as well as bench configuration, a full-featured graphical interface has been developed. DMC is currently executed on both Sun SPARCstation 2 and Sun SPARCstation 10 platforms and routinely used to model bench and crater blasting problems. This paper will document the design and development of the full-featured interface to DMC. The development of the interface will be tracked through the various stages, highlighting the adjustments made to allow the necessary parameters tomore » be entered in terms and units that field blasters understand. The paper also discusses a novel way of entering non-integer numbers and the techniques necessary to display blasting parameters in an understandable visual manner. A video presentation will demonstrate the graphics interface and explains its use.« less

Blasting, graphical interfaces and Unix

DOE Office of Scientific and Technical Information (OSTI.GOV)

Knudsen, S.; Preece, D.S.

1994-12-31

A discrete element computer program, DMC (Distinct Motion Code) was developed to simulate blast-induced rock motion. To simplify the complex task of entering material and explosive design parameters as well as bench configuration, a full-featured graphical interface has been developed. DMC is currently executed on both Sun SPARCstation 2 and Sun SPARCstation 10 platforms and routinely used to model bench and crater blasting problems. This paper will document the design and development of the full-featured interface to DMC. The development of the interface will be tracked through the various stages, highlighting the adjustments made to allow the necessary parameters tomore » be entered in terms and units that field blasters understand. The paper also discusses a novel way of entering non-integer numbers and the techniques necessary to display blasting parameters in an understandable visual manner. A video presentation will demonstrate the graphics interface and explains its use.« less

The Evolution of Computer Based Learning Software Design: Computer Assisted Teaching Unit Experience.

ERIC Educational Resources Information Center

Blandford, A. E.; Smith, P. R.

1986-01-01

Describes the style of design of computer simulations developed by Computer Assisted Teaching Unit at Queen Mary College with reference to user interface, input and initialization, input data vetting, effective display screen use, graphical results presentation, and need for hard copy. Procedures and problems relating to academic involvement are…

Biomass utilization for bioenergy in the Western United States

Treesearch

D.L. Nicholls; R. Monserud; D. Dykstra

2008-01-01

Wildfires, hazardous fuel buildups, small-diameter timber, wildland-urban interface zones, biomass. These are some of the terms becoming familiar to communities throughout the Western United States after the record-breaking fire seasons of the past decade. Although small-diameter stems are generally expensive to remove and often have limited utilization options, the...

Recreation visitor research: studies of diversity

Treesearch

Deborah J. Chavez; Patricia L. Winter; James D. Absher

2008-01-01

In 1987, the Pacific Southwest Research Station (PSW) of the U.S. Department of Agriculture Forest Service (USFS) chartered a research work unit to examine outdoor recreation in the wildland-urban interface. The new work unit was established to address the needs of the increasingly diverse recreation visitors to national forests. The four forest supervisors in southern...

Successful completion of a cyclic ground test of a mercury ion auxiliary propulsion system

NASA Technical Reports Server (NTRS)

Francisco, David R.; Low, Charles A., Jr.; Power, John L.

1988-01-01

An engineering model Ion Auxiliary Propulsion System (IAPS) 8-cm thruster (S/N 905) has completed a life test at NASA Lewis Research Center. The mercury ion thruster successfully completed and exceeded the test goals of 2557 on/off cycles and 7057 hr of operation at full thrust. The final 1200 cycles and 3600 hr of the life test were conducted using an engineering model of the IAPS power electronics unit (PEU) and breadboard digital controller and interface unit (DCIU). This portion of the test is described in this paper with a charted history of thruster operating parameters and off-normal events. Performance and operating characteristics were constant throughout the test with only minor variations. The engineering model power electronics unit operated without malfunction; the flight software in the digital controller and interface unit was exercised and verified. Post-test inspection of the thruster revealed facility enhanced accelerator grid erosion but overall the thruster was in good condition. It was concluded that the thruster performance was not drastically degraded by time or cycles. Additional cyclic testing is currently under consideration.

Successful completion of a cyclic ground test of a mercury Ion Auxiliary Propulsion System

NASA Technical Reports Server (NTRS)

Francisco, David R.; Low, Charles A., Jr.; Power, John L.

1988-01-01

An engineering model Ion Auxiliary Propulsion System (IAPS) 8-cm thruster (S/N 905) has completed a life test at NASA Lewis Research Center. The mercury ion thruster successfully completed and exceeded the test goals of 2557 on/off cycles and 7057 hr of operation at full thrust. The final 1200 cycles and 3600 hr of the life test were conducted using an engineering model of the IAPS power electronics unit (PEU) and breadboard digital controller and interface unit (DCIU). This portion of the test is described in this paper with a charted history of thruster operating parameters and off-normal events. Performance and operating characteristics were constant throughout the test with only minor variations. The engineering model power electronics unit operated without malfunction; the flight software in the digital controller and interface unit was exercised and verified. Post-test inspection of the thruster revealed facility enhanced accelerator grid erosion but overall the thruster was in good condition. It was concluded that the thruster performance was not drastically degraded by time or cycles. Additional cyclic testing is currently under consideration.

Rapid growth of the US wildland-urban interface raises wildfire risk

Treesearch

Volker C. Radeloff; David P. Helmers; H. Anu Kramer; Miranda H. Mockrin; Patricia M. Alexandre; Avi Bar-Massada; Van Butsic; Todd J. Hawbaker; Sebastián Martinuzzi; Alexandra D. Syphard; Susan I. Stewart

2018-01-01

The wildland-urban interface (WUI) is the area where houses and wildland vegetation meet or intermingle, and where wildfire problems are most pronounced. Here we report that the WUI in the United States grew rapidly from 1990 to 2010 in terms of both number of new houses (from 30.8 to 43.4 million; 41% growth) and land area (from 581,000 to 770,000 km2...

Fuels planning: science synthesis and integration; environmental consequences fact sheet 03: structure fires in the wildland-urban interface

Treesearch

Steve Sutherland

2004-01-01

National Fire Protection Association (NFPA) data indicate that wildfires destroyed approximately 9,000 homes between 1985 and 1994 in the United States. The loss of homes to wildfire has had a significant impact on Federal fire policy. This fact sheet discusses the causes of home ignitions in the wildland-urban interface, home ignition zones, how to reduce home...

Towards a Warfighter’s Associate: Eliminating the Operator Control Unit

DTIC Science & Technology

2004-10-01

ABSTRACT This paper introduces the long-term concept of a supervised autonomous Warfighter’s Associate, which uses a natural-language interface for...paper introduces the long-term concept of a supervised autonomous Warfighter’s Associate, which employs a natural-language interface for communication...results to date. The primary application discussed is military, but the concept also applies to law enforcement, space exploration, and search-and

JPRS Report, Soviet Union, Foreign Military Review, No. 8, August 1987

DTIC Science & Technology

1988-01-28

Hinkley Point (1.5 million) and Hartlepool (1.3 million). In recent years the country has begun building large hydro- electric pumped storage power ...antenna 6. Interface equipment 7. Data transmission line terminal 8. Computer 9. Power supply plant control station 10. Radio-relay station terminals... stations and data transmission line, interface equipment, and power distribution unit (Fig. 3). The parallel computer, which performs operations on

Living with fire: How social scientists are helping wildland-urban interface communities reduce wildfire risk

Treesearch

Brian Cooke; Daniel Williams; Travis Paveglio; Matthew Carroll

2016-01-01

Reducing wildfire risk to lives and property is a critical issue for policy makers, land managers, and citizens who reside in high-risk fire areas of the United States - this is especially the case in the Rocky Mountain region and other western states. In order for a wildfire risk reduction effort to be effective in a U.S. wildland-urban interface (WUI)...

Nanoscale Structure at Mineral-Fluid Interfaces

NASA Astrophysics Data System (ADS)

Sturchio, N. C.; Sturchio, N. C.; Fenter, P.; Cheng, L.; Park, C.; Zhang, Z.; Zhang, Z.; Nagy, K. L.; Schlegel, M. L.

2001-12-01

The nature of nanoparticles and their role in the natural environment is currently a subject of renewed interest. The high surface area (and surface area-to-volume ratio) of nanoparticles exerts a widespread influence on geochemical reactions and transport processes. A thorough understanding of the nanoscale world remains largely hypothetical, however, because of the challenges associated with characterizing nanoscale structures and processes. Recent insights gained from high-resolution synchrotron x-ray reflectivity measurements at the solid-fluid interfaces of macroscopic (i.e., mm-scale) mineral particles may provide relevant guidelines for expected nanoparticle surface structures. For example, at calcite-water and barite-water interfaces, undercoordinated surface cations bond with water species of variable protonation, and modest relaxations (to several hundredths of a nanometer) affect the outermost unit cells [1,2]. Undercoordinated tetrahedral ions at aluminosilicate surfaces also bond with water species, whereas interstitial or interlayer alkali or alkaline earth ions at the surface may readily exchange with hydronium or other ions; modest relaxations also affect the outermost unit cells [3,4]. Modulation of liquid water structure out to about one nanometer has been observed at the (001) cleavage surface of muscovite in deionized water, and may be present at other mineral-fluid interfaces [4]. Dissolution mechanisms at the orthoclase-water interface have been clarified by combining x-ray reflectivity and scanning force microscopy measurements [5]. Further progress in understanding nanoscale structures and processes at macroscopic mineral-water interfaces is likely to benefit nanoparticle studies. [1] Fenter et al. (2000) Geochim. Cosmochim. Acta 64, 1221-1228. [2] Fenter et al. (2001) J. Phys. Chem. B 105(34), 8112-8119. [3] Fenter et al. (2000) Geochim. Cosmochim. Acta 64, 3663-3673. [4] Cheng et al. (2001) Phys. Rev. Lett., (in press). [5] Teng et al. (2001) Geochim. Cosmochim. Acta 65, (in press).

ROSE MIU Testing

NASA Technical Reports Server (NTRS)

Austin, Rebekah

2015-01-01

Overview of work done by Rebekah Austin during Pathways Internship work tour. Describes ROSE MIU (Reconfigurable Operational Spacecraft for Science and Exploration Module Interface Unit) features and test plan.

Zak phase induced multiband waveguide by two-dimensional photonic crystals.

PubMed

Yang, Yuting; Xu, Tao; Xu, Yun Fei; Hang, Zhi Hong

2017-08-15

Interface states in photonic crystals provide efficient approaches to control the flow of light. Photonic Zak phase determines the bulk band properties of photonic crystals, and, by assembling two photonic crystals with different bulk band properties together, deterministic interface states can be realized. By translating each unit cell of a photonic crystal by half the lattice constant, another photonic crystal with identical common gaps but a different Zak phase at each photonic band can be created. By assembling these two photonic crystals together, multiband waveguide can thus be easily created and then experimentally characterized. Our experimental results have good agreement with numerical simulations, and the propagation properties of these measured interface states indicate that this new type of interface state will be a good candidate for future applications of optical communications.

Spacecraft Reed-Solomon downlink module

NASA Technical Reports Server (NTRS)

Luong, Huy H. (Inventor); Donaldson, James A. (Inventor); Wood, Steven H. (Inventor)

1998-01-01

Apparatus and method for providing downlink frames to be transmitted from a spacecraft to a ground station. Each downlink frame includes a synchronization pattern and a transfer frame. The apparatus may comprise a monolithic Reed-Solomon downlink (RSDL) encoding chip coupled to data buffers for storing transfer frames. The RSKL chip includes a timing device, a bus interface, a timing and control unit, a synchronization pattern unit, and a Reed-Solomon encoding unit, and a bus arbiter.

First-Principles Prediction of Two-Dimensional Electron Gas Driven by Polarization Discontinuity in Nonpolar/Nonpolar AHfO3/SrTiO3 (A=Ca, Sr, and Ba) Heterostructures

NASA Astrophysics Data System (ADS)

Cheng, Jianli; Nazir, Safdar; Yang, Kesong

By using first-principles electronic structure calculations, we explored the possibility of producing two-dimensional electron gas (2DEG) in nonpolar/nonpolar AHfO3/SrTiO3 (A = Ca, Sr, and Ba) heterostructures (HS). Two types of interfaces, AO/TiO2 and HfO2/SrO, each with AO and HfO2 surface terminations, are modeled, respectively. The polarization domain and resulting interfacial electronic property are found to be more sensitive to the surface termination of the film rather than the interface model. As film thickness increases, an insulator-to-metal transition (IMT) is found in all the HS with HfO2 surface termination: for AO/TiO2 interfaces, predicted critical film thickness for an IMT is about 7, 6, and 3 unit cells for CaHfO3/SrTiO3, SrHfO3/SrTiO3, and BaHfO3/SrTiO3, respectively; for HfO2/SrO interfaces, the critical film thickness is about 7.5, 5.5, and 4.5 unit cells, respectively. In contrast, for the HS with AO surface termination, only CaHfO3/SrTiO3 exhibits an IMT with a much larger critical film thickness about 11 - 12 unit cells. This work is expected to stimulate further experimental investigation to the interfacial conductivity in the nonpolar/nonpolar AHfO3/SrTiO3 HS. National Science Foundation and Department of Defense National Security Science and Engineering Faculty Fellowship.

Chapter 3. Coordination and collaboration with interface units. Recommendations and standard operating procedures for intensive care unit and hospital preparations for an influenza epidemic or mass disaster.

PubMed

Joynt, Gavin M; Loo, Shi; Taylor, Bruce L; Margalit, Gila; Christian, Michael D; Sandrock, Christian; Danis, Marion; Leoniv, Yuval; Sprung, Charles L

2010-04-01

To provide recommendations and standard operating procedures (SOPs) for intensive care unit (ICU) and hospital preparations for an influenza pandemic or mass disaster with a specific focus on enhancing coordination and collaboration between the ICU and other key stakeholders. Based on a literature review and expert opinion, a Delphi process was used to define the essential topics including coordination and collaboration. Key recommendations include: (1) establish an Incident Management System with Emergency Executive Control Groups at facility, local, regional/state or national levels to exercise authority and direction over resource use and communications; (2) develop a system of communication, coordination and collaboration between the ICU and key interface departments within the hospital; (3) identify key functions or processes requiring coordination and collaboration, the most important of these being manpower and resources utilization (surge capacity) and re-allocation of personnel, equipment and physical space; (4) develop processes to allow smooth inter-departmental patient transfers; (5) creating systems and guidelines is not sufficient, it is important to: (a) identify the roles and responsibilities of key individuals necessary for the implementation of the guidelines; (b) ensure that these individuals are adequately trained and prepared to perform their roles; (c) ensure adequate equipment to allow key coordination and collaboration activities; (d) ensure an adequate physical environment to allow staff to properly implement guidelines; (6) trigger events for determining a crisis should be defined. Judicious planning and adoption of protocols for coordination and collaboration with interface units are necessary to optimize outcomes during a pandemic.

Lower layers in the motor cortex are more effective targets for penetrating microelectrodes in cortical prostheses

NASA Astrophysics Data System (ADS)

Parikh, Hirak; Marzullo, Timothy C.; Kipke, Daryl R.

2009-04-01

Improving cortical prostheses requires the development of recording neural interfaces that are efficient in terms of providing maximal control information with minimal interface complexity. While the typical approaches have targeted neurons in the motor cortex with multiple penetrating shanks, an alternative approach is to determine an efficient distribution of electrode sites within the layers of the cortex with fewer penetrating shanks. The objective of this study was to compare unit activity in the upper and lower layers of the cortex with respect to movement and direction in order to inform the design of penetrating microelectrodes. Four rats were implanted bilaterally with multi-site single-shank silicon microelectrode arrays in the neck/shoulder region of the motor cortex. We simultaneously recorded unit activity across all layers of the motor cortex while the animal was engaged in a movement direction task. Localization of the electrode array within the different layers of the cortex was determined by histology. We denoted units from layers 2 and 3 and units as upper layer units, and units from layers 5 and 6 as lower layer units. Analysis of unit spiking activity demonstrated that both the upper and lower layers encode movement and direction information. Unit responses in either cortical layer of the cortex were not preferentially associated with contralateral or ipsilateral movement. Aggregate analysis (633 neurons) and best session analysis (75 neurons) indicated that units in the lower layers (layers 5, 6) are more likely to encode direction information when compared to units in the upper layers (layers 2, 3) (p< 0.05). These results suggest that electrode sites clustered in the lower layers provide access to more salient control information for cortical neuroprostheses.

GFU-6/E 30mm Ammunition Loader for GAU-8A Gun System

DTIC Science & Technology

1975-12-01

dropped onto the conveyor (See Figure 17) and transferred to the aircraft on these elements through flexible chuting which interfaces directly with the...14. Dwell Linkage 19 15. Horizontal Conveyor - Flex Chute Interface 20 16. Element Turnaround Sprocket 21 17. Horizontal Conveyor 22 18. Load Head... conveyor element mechanism for transport to the GAU-8/A loader unit. d. The contractor shall design the automated loading system to accept unfired

Arbitrating Control of Control and Display Units

NASA Technical Reports Server (NTRS)

Sugden, Paul C.

2007-01-01

The ARINC 739 Switch is a computer program that arbitrates control of two multi-function control and display units (MCDUs) between (1) a commercial flight-management computer (FMC) and (2) NASA software used in research on transport aircraft. (MCDUs are the primary interfaces between pilots and FMCs on many commercial aircraft.) This program was recently redesigned into a software library that can be embedded in research application programs. As part of the redesign, this software was combined with software for creating custom pages of information to be displayed on a CDU. This software commands independent switching of the left (pilot s) and right (copilot s) MCDUs. For example, a custom CDU page can control the left CDU while the FMC controls the right CDU. The software uses menu keys to switch control of the CDU between the FMC or a custom CDU page. The software provides an interface that enables custom CDU pages to insert keystrokes into the FMC s CDU input interface. This feature allows the custom CDU pages to manipulate the FMC as if it were a pilot.

Performance of a High-Fidelity 4kW-Class Engineering Model PPU and Integration with HiVHAc System

NASA Technical Reports Server (NTRS)

Pinero, Luis R.; Kamhawi, Hani; Shilo, Vladislav

2016-01-01

The High Voltage Hall Accelerator (HiVHAc) propulsion system consists of a thruster,power processing unit (PPU), and propellant feed system. An engineering model PPU was developed by Colorado Power Electronics, Inc. funded by NASA's Small Business Innovative Research Program. This PPU uses an innovative 3-phase resonant converter to deliver 4 kW of discharge power over a wide range of input and output voltage conditions.The PPU includes a digital control interface unit that automatically controls the PPU and a xenon flow control module (XFCM). It interfaces with a control computer to receive high level commands and relay telemetry through a MIL-STD-1553B interface. The EM PPU was thoroughly tested at GRC for functionality and performance at temperature extremes and demonstrated total efficiencies a high as 95 percent. It was integrated with the HiVHAc thruster and the XFCM to demonstrate closed-loop control of discharge current with anode flow. Initiation of the main discharge and power throttling were also successfully demonstrated and discharge oscillations were characterized.

JPIC-Rad-Hard JPEG2000 Image Compression ASIC

NASA Astrophysics Data System (ADS)

Zervas, Nikos; Ginosar, Ran; Broyde, Amitai; Alon, Dov

2010-08-01

JPIC is a rad-hard high-performance image compression ASIC for the aerospace market. JPIC implements tier 1 of the ISO/IEC 15444-1 JPEG2000 (a.k.a. J2K) image compression standard [1] as well as the post compression rate-distortion algorithm, which is part of tier 2 coding. A modular architecture enables employing a single JPIC or multiple coordinated JPIC units. JPIC is designed to support wide data sources of imager in optical, panchromatic and multi-spectral space and airborne sensors. JPIC has been developed as a collaboration of Alma Technologies S.A. (Greece), MBT/IAI Ltd (Israel) and Ramon Chips Ltd (Israel). MBT IAI defined the system architecture requirements and interfaces, The JPEG2K-E IP core from Alma implements the compression algorithm [2]. Ramon Chips adds SERDES interfaces and host interfaces and integrates the ASIC. MBT has demonstrated the full chip on an FPGA board and created system boards employing multiple JPIC units. The ASIC implementation, based on Ramon Chips' 180nm CMOS RadSafe[TM] RH cell library enables superior radiation hardness.

Low-power grating detection system chip for high-speed low-cost length and angle precision measurement

NASA Astrophysics Data System (ADS)

Hou, Ligang; Luo, Rengui; Wu, Wuchen

2006-11-01

This paper forwards a low power grating detection chip (EYAS) on length and angle precision measurement. Traditional grating detection method, such as resister chain divide or phase locked divide circuit are difficult to design and tune. The need of an additional CPU for control and display makes these methods' implementation more complex and costly. Traditional methods also suffer low sampling speed for the complex divide circuit scheme and CPU software compensation. EYAS is an application specific integrated circuit (ASIC). It integrates micro controller unit (MCU), power management unit (PMU), LCD controller, Keyboard interface, grating detection unit and other peripherals. Working at 10MHz, EYAS can afford 5MHz internal sampling rate and can handle 1.25MHz orthogonal signal from grating sensor. With a simple control interface by keyboard, sensor parameter, data processing and system working mode can be configured. Two LCD controllers can adapt to dot array LCD or segment bit LCD, which comprised output interface. PMU alters system between working and standby mode by clock gating technique to save power. EYAS in test mode (system action are more frequently than real world use) consumes 0.9mw, while 0.2mw in real world use. EYAS achieved the whole grating detection system function, high-speed orthogonal signal handling in a single chip with very low power consumption.

Nature of weak magnetism in SrTiO3/LaAlO3 multilayers.

PubMed

Salman, Z; Ofer, O; Radovic, M; Hao, H; Ben Shalom, M; Chow, K H; Dagan, Y; Hossain, M D; Levy, C D P; Macfarlane, W A; Morris, G M; Patthey, L; Pearson, M R; Saadaoui, H; Schmitt, T; Wang, D; Kiefl, R F

2012-12-21

We report the observation of weak magnetism in superlattices of LaAlO(3)/SrTiO(3) using β-detected nuclear magnetic resonance. The spin lattice relaxation rate of ^{8}Li in superlattices with a spacer layers of 8 and 6 unit cells of LaAlO(3) exhibits a strong peak near ~35 K, whereas no such peak is observed in a superlattice with spacer layer thickness of 3 unit cells. We attribute the observed temperature dependence to slowing down of weakly coupled electronic moments at the LaAlO(3)/SrTiO(3) interface. These results show that the magnetism at the interface depends strongly on the thickness of the spacer layer, and that a minimal thickness of ~4-6 unit cells is required for the appearance of magnetism. A simple model is used to determine that the observed relaxation is due to small fluctuating moments (~0.002μ(B)) in the two samples with a larger LaAlO(3) spacer thickness.

Change of the isoelectric point of hemoglobin at the air/water interface probed by the orientational flip-flop of water molecules.

PubMed

Devineau, Stéphanie; Inoue, Ken-Ichi; Kusaka, Ryoji; Urashima, Shu-Hei; Nihonyanagi, Satoshi; Baigl, Damien; Tsuneshige, Antonio; Tahara, Tahei

2017-04-19

Elucidation of the molecular mechanisms of protein adsorption is of essential importance for further development of biotechnology. Here, we use interface-selective nonlinear vibrational spectroscopy to investigate protein charge at the air/water interface by probing the orientation of interfacial water molecules. We measured the Im χ (2) spectra of hemoglobin, myoglobin, serum albumin and lysozyme at the air/water interface in the CH and OH stretching regions using heterodyne-detected vibrational sum frequency generation (HD-VSFG) spectroscopy, and we deduced the isoelectric point of the protein by monitoring the orientational flip-flop of water molecules at the interface. Strikingly, our measurements indicate that the isoelectric point of hemoglobin is significantly lowered (by about one pH unit) at the air/water interface compared to that in the bulk. This can be predominantly attributed to the modifications of the protein structure at the air/water interface. Our results also suggest that a similar mechanism accounts for the modification of myoglobin charge at the air/water interface. This effect has not been reported for other model proteins at interfaces probed by conventional VSFG techniques, and it emphasizes the importance of the structural modifications of proteins at the interface, which can drastically affect their charge profiles in a protein-specific manner. The direct experimental approach using HD-VSFG can unveil the changes of the isoelectric point of adsorbed proteins at various interfaces, which is of major relevance to many biological applications and sheds new light on the effect of interfaces on protein charge.

Introduction of knowledge bases in patient's data management system: role of the user interface.

PubMed

Chambrin, M C; Ravaux, P; Jaborska, A; Beugnet, C; Lestavel, P; Chopin, C; Boniface, M

1995-02-01

As the number of signals and data to be handled grows in intensive care unit, it is necessary to design more powerful computing systems that integrate and summarize all this information. The manual input of data as e.g. clinical signs and drug prescription and the synthetic representation of these data requires an ever more sophisticated user interface. The introduction of knowledge bases in the data management allows to conceive contextual interfaces. The objective of this paper is to show the importance of the design of the user interface, in the daily use of clinical information system. Then we describe a methodology that uses the man-machine interaction to capture the clinician knowledge during the clinical practice. The different steps are the audit of the user's actions, the elaboration of statistic models allowing the definition of new knowledge, and the validation that is performed before complete integration. A part of this knowledge can be used to improve the user interface. Finally, we describe the implementation of these concepts on a UNIX platform using OSF/MOTIF graphical interface.

Tandem Organic Light-Emitting Diodes.

PubMed

Fung, Man-Keung; Li, Yan-Qing; Liao, Liang-Sheng

2016-12-01

A tandem organic light-emitting diode (OLED) is an organic optoelectronic device that has two or more electroluminescence (EL) units connected electrically in series with unique intermediate connectors within the device. Researchers have studied this new OLED architecture with growing interest and have found that the current efficiency of a tandem OLED containing N EL units (N > 1) should be N times that of a conventional OLED containing only a single EL unit. Therefore, this new architecture is potentially useful for constructing high-efficiency, high-luminance, and long-lifetime OLED displays and organic solid-state lighting sources. In a tandem OLED, the intermediate connector plays a crucial role in determining the effectiveness of the stacked EL units. The interfaces in the connector control the inner charge generation and charge injection into the adjacent EL units. Meanwhile, the transparency and the thickness of the connector affect the light output of the device. Therefore, the intermediate connector should be made to meet both the electrical and optical requirements for achieving optimal performance. Here, recent advances in the research of the tandem OLEDs is discussed, with the main focus on material selection and interface studies in the intermediate connectors, as well as the optical design of the tandem OLEDs. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Correlation-driven charge order at the interface between a Mott and a band insulator.

PubMed

Pentcheva, Rossitza; Pickett, Warren E

2007-07-06

To study digital Mott insulator LaTiO3 and band insulator SrTiO3 interfaces, we apply correlated band theory within the local density approximation including a Hubbard U to (n, m) multilayers, 1

IEEE 1451.2 based Smart sensor system using ADuc847

NASA Astrophysics Data System (ADS)

Sreejithlal, A.; Ajith, Jose

IEEE 1451 standard defines a standard interface for connecting transducers to microprocessor based data acquisition systems, instrumentation systems, control and field networks. Smart transducer interface module (STIM) acts as a unit which provides signal conditioning, digitization and data packet generation functions to the transducers connected to it. This paper describes the implementation of a microcontroller based smart transducer interface module based on IEEE 1451.2 standard. The module, implemented using ADuc847 microcontroller has 2 transducer channels and is programmed using Embedded C language. The Sensor system consists of a Network Controlled Application Processor (NCAP) module which controls the Smart transducer interface module (STIM) over an IEEE1451.2-RS232 bus. The NCAP module is implemented as a software module in C# language. The hardware details, control principles involved and the software implementation for the STIM are described in detail.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barbante, Paolo; Frezzotti, Aldo; Gibelli, Livio

The unsteady evaporation of a thin planar liquid film is studied by molecular dynamics simulations of Lennard-Jones fluid. The obtained results are compared with the predictions of a diffuse interface model in which capillary Korteweg contributions are added to hydrodynamic equations, in order to obtain a unified description of the liquid bulk, liquid-vapor interface and vapor region. Particular care has been taken in constructing a diffuse interface model matching the thermodynamic and transport properties of the Lennard-Jones fluid. The comparison of diffuse interface model and molecular dynamics results shows that, although good agreement is obtained in equilibrium conditions, remarkable deviationsmore » of diffuse interface model predictions from the reference molecular dynamics results are observed in the simulation of liquid film evaporation. It is also observed that molecular dynamics results are in good agreement with preliminary results obtained from a composite model which describes the liquid film by a standard hydrodynamic model and the vapor by the Boltzmann equation. The two mathematical model models are connected by kinetic boundary conditions assuming unit evaporation coefficient.« less

Applications of Spacelab Payload Standard Modular Electronics /SPSME/

NASA Technical Reports Server (NTRS)

Wilkinson, D. D.; Kasulka, L. H.

1980-01-01

The NASA sponsored Spacelab Payload Standard Modular Electronics program has been designed with the basic objective of providing a space-qualified set of standardized modular electronics to support investigations identified for Spacelab payloads. These units are reusable, have functional, physical, and interface characteristics which allow them to be conveniently assembled in a multitude of configurations, and functionally interchangeable with their ground-based equivalents. The interfacing and control modules are described and typical hardware applications are presented.

Advanced Spacesuit Informatics Software Design for Power, Avionics and Software Version 2.0

NASA Technical Reports Server (NTRS)

Wright, Theodore W.

2016-01-01

A description of the software design for the 2016 edition of the Informatics computer assembly of the NASAs Advanced Extravehicular Mobility Unit (AEMU), also called the Advanced Spacesuit. The Informatics system is an optional part of the spacesuit assembly. It adds a graphical interface for displaying suit status, timelines, procedures, and warning information. It also provides an interface to the suit mounted camera for recording still images, video, and audio field notes.

A pressure and shear sensor system for stress measurement at lower limb residuum/socket interface.

PubMed

Laszczak, P; McGrath, M; Tang, J; Gao, J; Jiang, L; Bader, D L; Moser, D; Zahedi, S

2016-07-01

A sensor system for measurement of pressure and shear at the lower limb residuum/socket interface is described. The system comprises of a flexible sensor unit and a data acquisition unit with wireless data transmission capability. Static and dynamic performance of the sensor system was characterised using a mechanical test machine. The static calibration results suggest that the developed sensor system presents high linearity (linearity error ≤ 3.8%) and resolution (0.9 kPa for pressure and 0.2 kPa for shear). Dynamic characterisation of the sensor system shows hysteresis error of approximately 15% for pressure and 8% for shear. Subsequently, a pilot amputee walking test was conducted. Three sensors were placed at the residuum/socket interface of a knee disarticulation amputee and simultaneous measurements were obtained during pilot amputee walking test. The pressure and shear peak values as well as their temporal profiles are presented and discussed. In particular, peak pressure and shear of approximately 58 kPa and 27 kPa, respectively, were recorded. Their temporal profiles also provide dynamic coupling information at this critical residuum/socket interface. These preliminary amputee test results suggest strong potential of the developed sensor system for exploitation as an assistive technology to facilitate socket design, socket fit and effective monitoring of lower limb residuum health. Copyright © 2016 IPEM. Published by Elsevier Ltd. All rights reserved.

Tracking BO6 Coupling in Perovskite Superlattices to Engineer Magnetic Interface Behavior

NASA Astrophysics Data System (ADS)

Borisevich, Albina; He, Qian; Ghosh, Saurabh; Moon, Eun Ju; May, Steve; Lupini, Andrew; Pantelides, Sokrates

In the past several years, control of BO6 octahedral coupling at ABO3 perovskite interfaces has emerged as a new tool for engineering of interface properties due to its strong coupling to polar and magnetic properties. High resolution data on tilt transitions at interfaces is instrumental for evaluating the validity of existing theoretical models and developing predictive theories. Recently, we have developed a unique method to investigate BO6 rotation patterns in complex oxides with unit cell resolution. Our method involves column shape analysis in ABF-STEM images of the perovskite heterointerfaces taken in specific orientations. This method will allow us to determine local symmetry between adjacent unit cells, revealing the BO6 coupling behavior at heterointerfaces in 3D. This technique was used to characterize structure and predict properties via a combined STEM and DFT study of magnetic superlattice of La(Ca)MnO3/La(Sr)MnO3 with different periodicities, which exhibit a range of electromagnetic coupling behaviors. We will also discuss the prospects for tilted structure determination using electron ptychography. The correlations among the BO6 rotation, domain size, superlattice periodicity and the electromagnetic coupling will be discussed in detail. Research supported by the MSED of the U.S.DOE, and through a user project at ORNL's CNMS, sponsored by the SUFD of the U.S. DOE.

An optical disk archive for a data base management system

NASA Technical Reports Server (NTRS)

Thomas, Douglas T.

1985-01-01

An overview is given of a data base management system that can catalog and archive data at rates up to 50M bits/sec. Emphasis is on the laser disk system that is used for the archive. All key components in the system (3 Vax 11/780s, a SEL 32/2750, a high speed communication interface, and the optical disk) are interfaced to a 100M bits/sec 16-port fiber optic bus to achieve the high data rates. The basic data unit is an autonomous data packet. Each packet contains a primary and secondary header and can be up to a million bits in length. The data packets are recorded on the optical disk at the same time the packet headers are being used by the relational data base management software ORACLE to create a directory independent of the packet recording process. The user then interfaces to the VAX that contains the directory for a quick-look scan or retrieval of the packet(s). The total system functions are distributed between the VAX and the SEL. The optical disk unit records the data with an argon laser at 100M bits/sec from its buffer, which is interfaced to the fiber optic bus. The same laser is used in the read cycle by reducing the laser power. Additional information is given in the form of outlines, charts, and diagrams.

Interface properties between a low band gap conjugated polymer and a calcium metal electrode.

PubMed

Zhang, Wei; Pan, Xiao; Feng, Xuefei; Wang, Chia-Hsin; Yang, Yaw-Wen; Ju, Huanxin; Zhu, Junfa

2016-04-14

Interfaces between metal electrodes and π-conjugated polymers play an important role in the organic optoelectronic devices. In this paper, the molecular orientation of the pristine poly[(9,9-dioctylfluorenyl-2,7-diyl)-alt-5,5-(4',7'-di-2-thienyl-2',1',3'-benzothiadiazole)] (APFO3) films, chemical reactions and the electronic structure during the interface formation of Ca/APFO3 have been investigated in detail using synchrotron radiation photoemission spectroscopy (SRPES), X-ray photoemission spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. It is shown that the APFO3 film has a high degree of orientational ordering with its aromatic ring tilted at an angle of 43° from the substrate, and the 9,9-dioctyl fluorene unit (F8) is almost in the same plane as the benzothiazole unit (BT). Upon vapor-deposition of Ca onto APFO3 at room temperature, Ca dopes electrons into APFO3 and induces the downward band bending of APFO3. Moreover, Ca can diffuse into the APFO3 subsurface and react with N, S and C atoms of APFO3. Finally, the barrier of electron injection at the Ca/APFO3 interface is derived by the energy level alignment diagram. These results enable us to gain comprehensive insights into APFO3 and will facilitate the reasonable design of high performance devices based on APFO3.

Interface-enhanced high-temperature superconductivity in single-unit-cell FeT e1 -xS ex films on SrTi O3

NASA Astrophysics Data System (ADS)

Li, Fangsen; Ding, Hao; Tang, Chenjia; Peng, Junping; Zhang, Qinghua; Zhang, Wenhao; Zhou, Guanyu; Zhang, Ding; Song, Can-Li; He, Ke; Ji, Shuaihua; Chen, Xi; Gu, Lin; Wang, Lili; Ma, Xu-Cun; Xue, Qi-Kun

2015-06-01

Recently discovered high-temperature superconductivity in single-unit-cell (UC) FeSe films on SrTi O3 (STO) substrate has stimulated tremendous research interest, both experimental and theoretical. Whether this scenario could be extended to other superconductors is vital in both identifying the enhanced superconductivity mechanism and further raising the critical transition temperature (Tc). Here we successfully prepared single-UC FeT e1 -xS ex(0.1 ≤x ≤0.6 ) films on STO substrates by molecular beam epitaxy and observed U -shaped superconducting gaps (Δ ) up to ˜16.5 meV , nearly ten times the gap value (Δ ˜1.7 meV ) of the optimally doped bulk FeT e0 .6S e0 .4 single crystal (Tc˜14.5 K ). No superconducting gap has been observed on the second UC and thicker FeT e1 -xS ex films at 5.7 K, indicating the important role of the interface. This interface-enhanced high-temperature superconductivity is further confirmed by ex situ transport measurements, which revealed an onset superconducting transition temperature above 40 K, nearly two times higher than that of the optimally doped bulk FeT e0 .6S e0 .4 single crystal. This work demonstrates that interface engineering is a feasible way to discover alternative superconductors with higher Tc.

Downsizer - A Graphical User Interface-Based Application for Browsing, Acquiring, and Formatting Time-Series Data for Hydrologic Modeling

USGS Publications Warehouse

Ward-Garrison, Christian; Markstrom, Steven L.; Hay, Lauren E.

2009-01-01

The U.S. Geological Survey Downsizer is a computer application that selects, downloads, verifies, and formats station-based time-series data for environmental-resource models, particularly the Precipitation-Runoff Modeling System. Downsizer implements the client-server software architecture. The client presents a map-based, graphical user interface that is intuitive to modelers; the server provides streamflow and climate time-series data from over 40,000 measurement stations across the United States. This report is the Downsizer user's manual and provides (1) an overview of the software design, (2) installation instructions, (3) a description of the graphical user interface, (4) a description of selected output files, and (5) troubleshooting information.

Evolution of MPCV Service Module Propulsion and GNC Interface Requirements

NASA Technical Reports Server (NTRS)

Hickman, Heather K.; Dickens, Kevin W.; Madsen, Jennifer M.; Gutkowski, Jeffrey P.; Ierardo, Nicola; Jaeger, Markus; Lux, Johannes; Freundenberger, John L.; Paisley, Jonathan

2014-01-01

The Orion Multi-Purpose Crew Vehicle Service Module Propulsion Subsystem provides propulsion for the integrated Crew and Service Module. Updates in the exploration architecture between Constellation and MPCV as well as NASA's partnership with the European Space Agency have resulted in design changes to the SM Propulsion Subsystem and updates to the Propulsion interface requirements with Guidance Navigation and Control. This paper focuses on the Propulsion and GNC interface requirement updates between the Constellation Service Module and the European Service Module and how the requirement updates were driven or supported by architecture updates and the desired use of hardware with heritage to United States and European spacecraft for the Exploration Missions, EM-1 and EM-2.

SWAN: An expert system with natural language interface for tactical air capability assessment

NASA Technical Reports Server (NTRS)

Simmons, Robert M.

1987-01-01

SWAN is an expert system and natural language interface for assessing the war fighting capability of Air Force units in Europe. The expert system is an object oriented knowledge based simulation with an alternate worlds facility for performing what-if excursions. Responses from the system take the form of generated text, tables, or graphs. The natural language interface is an expert system in its own right, with a knowledge base and rules which understand how to access external databases, models, or expert systems. The distinguishing feature of the Air Force expert system is its use of meta-knowledge to generate explanations in the frame and procedure based environment.

Pilot-Configurable Information on a Display Unit

NASA Technical Reports Server (NTRS)

Bell, Charles Frederick (Inventor); Ametsitsi, Julian (Inventor); Che, Tan Nhat (Inventor); Shafaat, Syed Tahir (Inventor)

2017-01-01

A small thin display unit that can be installed in the flight deck for displaying only flight crew-selected tactical information needed for the task at hand. The flight crew can select the tactical information to be displayed by means of any conventional user interface. Whenever the flight crew selects tactical information for processes the request, including periodically retrieving measured current values or computing current values for the requested tactical parameters and returning those current tactical parameter values to the display unit for display.

Auxiliary engine digital interface unit (DIU)

NASA Technical Reports Server (NTRS)

1972-01-01

This auxiliary propulsion engine digital unit controls both the valving of the fuel and oxidizer to the engine combustion chamber and the ignition spark required for timely and efficient engine burns. In addition to this basic function, the unit is designed to manage it's own redundancy such that it is still operational after two hard circuit failures. It communicates to the data bus system several selected information points relating to the operational status of the electronics as well as the engine fuel and burning processes.

Gas and water recycling system for IOC vivarium experiments

NASA Technical Reports Server (NTRS)

Nitta, K.; Otsubo, K.

1986-01-01

Water and gas recycling units designed as one of the common experiment support system for the life science experiment facilities used in the Japanese Experiment Module are discussed. These units will save transportation and operation costs for the life science experiments in the space station. These units are also designed to have interfaces so simple that the connection to another life science experiment facilities such as the Research Animal Holding Facility developed by the Rockheed Missiles and Space Company can be easily done with small modification.

Metamorphic sole formation reveals plate interface rheology during early subduction

NASA Astrophysics Data System (ADS)

Mathieu, S.; Agard, P.; Dubacq, B.; Plunder, A.; Prigent, C.

2015-12-01

Metamorphic soles are m to ~500m thick tectonic slices welded beneath most large ophiolites. They correspond to highly to mildly deformed portions of oceanic lithosphere metamorphosed at amphibolite to granulite facies peak conditions. Metamorphic soles are interpreted as formed ≤1-2Ma after intraoceanic subduction initiation by heat transfer from the hot, incipient mantle wegde to the underthrusting lower plate. Their early accretion and exhumation together with the future ophiolite implies at least one jump of the subduction plate interface from above to below the metamorphic sole. Metamorphic soles thus represent one of the few remnants of the very early evolution of the subduction plate interface and provide major constraints on the thermal structure and the effective rheology of the crust and mantle along the nascent slab interface.We herein present a structural and petrological detailed description of the Oman and Turkey metamorphic soles. Both soles present a steep inverted metamorphic structure, with isograds subparallel to the peridotite contact, in which the proportion of mafic rocks, pressure and temperature conditions increase upward. They comprise, as most metamorphic soles worldwide, two main units: (1) a high-grade unit adjacent to the overlying peridotite composed of granulitized to amphibolized metabasalts, with rare metasedimentary interlayers (~800±100ºC at 10±2kbar) and (2) a low-grade greenschist facies unit composed of metasedimentary rocks with rare metatuffs (~500±100ºC at 5±2kbar). We provide for the first time refined P-T peak condition estimations by means of pseudosection modelling and maximum temperature constraints for the Oman low-grade sole by RAMAN thermometry. In order to quantify micro-scale deformations trough the sole, we also present EBSD data on the Oman garnet-bearing and garnet-free high-grade sole.With these new constraints, we finally propose a new conceptual mechanical model for metamorphic sole formation. This model excludes the presence of a continuous inverted metamorphic gradient through the sole but implies the stacking of several homogeneous slivers to constitute the present structure of the sole. These successive thrusts are the result of rheological changes as the plate interface progressively cools.

Performance Evaluation of INMARSAT Fleet 77 Services Aboard the R/V Ewing

NASA Astrophysics Data System (ADS)

Schmidt, V. E.; Chayes, D. N.; Gold, E.

2002-12-01

In late 2001, the R/V Ewing was asked to conduct a trial installation of the Thrane and Thrane [of Denmark] F77 antennae [TT-3084A Capsat] and the newest IMNARSAT communications channel, INMARSAT F. Branded as "Fleet F77 Service" by INMARSAT, the service provides ISDN 64kbps and 56kbps high quality voice and data connections as well as Mobile Packet Data Service which allows an "always on" connection under which users pay for the packets they send rather than the time they are connected. Fleet F77 also allows low bandwidth [2.4kbps] "Mini-M" voice and fax services. While not currently available, the Capsat antennae also is prepared to take advantage of 4th Generation Inm-IV satellites [expected in 2004] allowing LAN speeds up to 432kbps. The F77 antenna consists of two units, the TT-3084A antenna and a single "Below Deck Unit". The Capsat antennae radome is a mere 84 cm in diameter - considerably smaller than that typically associated with INMARSAT A or B. It was mounted above the forward port corner of the pilot house atop a reinforced mast. Below deck electronics consist of a single unit containing three analog RJ-11 interfaces, a single ISDN interface, two RS-232 serial interfaces, a USB interface [not functional on our test unit] and a standard Handset. This was mounted in the pilot house electronics space. The Capsat antennae and associated electronics were installed in Guam in mid February 2002 and the system began operational trials during the following cruise on February 24th. Tests of the Fleet 77 system consisted of Mini-M voice and fax both to and from the ship, 64kbs voice to and from the ship, MPDS connects to shore, and operational tests with the INMARSAT Command Center. The trial period completed May 12th after which the F77 became an integral part of the Ewing's communication suite. Results of these tests as well as latency and packet loss measurements made over various data connection types will be presented.

Configuration of freshwater/saline-water interface and geologic controls on distribution of freshwater in a regional aquifer system, central lower peninsula of Michigan

USGS Publications Warehouse

Westjohn, David B.; Weaver, T.L.

1996-01-01

Electrical-resistivity logs and water-quality data were used to delineate the fresh water/saline-water interface in a 22,000-square-mile area of the central Michigan Basin, where Mississippian and younger geologic units form a regional system of aquifers and confining units.Pleistocene glacial deposits in the central Lower Peninsula of Michigan contain freshwater, except in a 1,600-square-mile area within the Saginaw Lowlands, where these deposits typically contain saline water. Pennsylvanian and Mississippian sandstones are freshwater bearing where they subcrop below permeable Pleistocene glacial deposits. Down regional dip from subcrop areas, salinity of ground water progressively increases in Early Pennsylvanian and Mississippian sandstones, and these units contain brine in the central part of the basin. Freshwater is present in Late Pennsylvanian sandstones in the northern and southern parts of the aquifer system. Typically, saline water is present in Pennsylvanian sandstones in the eastern and western parts of the aquifer system.Relief on the freshwater/saline-water interface is about 500 feet. Altitudes of the interface are low (300 to 400 feet above sea level) along a north-south-trending corridor through the approximate center of the area mapped. In isolated areas in the northern and western parts of the aquifer system, the altitude of the base of freshwater is less than 400 feet, but altitude is typically more than 400 feet. In the southern and northern parts of the aquifer system where Pennsylvanian rocks are thin or absent, altitudes of the base of freshwater range from 700 to 800 feet and from 500 to 700 feet above sea level, respectively.Geologic controls on distribution of freshwater in the regional aquifer system are (1) direct hydraulic connection of sandstone aquifers and freshwater-bearing, permeable glacial deposits, (2) impedance of upward discharge of saline water from sandstones by lodgement tills, (3) impedance of recharge of freshwater to bedrock (or discharge of saline water from bedrock) by Jurassic red beds, and (4) vertical barriers to ground-water flow within and between sandstone units.

PolySac3DB: an annotated data base of 3 dimensional structures of polysaccharides.

PubMed

Sarkar, Anita; Pérez, Serge

2012-11-14

Polysaccharides are ubiquitously present in the living world. Their structural versatility makes them important and interesting components in numerous biological and technological processes ranging from structural stabilization to a variety of immunologically important molecular recognition events. The knowledge of polysaccharide three-dimensional (3D) structure is important in studying carbohydrate-mediated host-pathogen interactions, interactions with other bio-macromolecules, drug design and vaccine development as well as material science applications or production of bio-ethanol. PolySac3DB is an annotated database that contains the 3D structural information of 157 polysaccharide entries that have been collected from an extensive screening of scientific literature. They have been systematically organized using standard names in the field of carbohydrate research into 18 categories representing polysaccharide families. Structure-related information includes the saccharides making up the repeat unit(s) and their glycosidic linkages, the expanded 3D representation of the repeat unit, unit cell dimensions and space group, helix type, diffraction diagram(s) (when applicable), experimental and/or simulation methods used for structure description, link to the abstract of the publication, reference and the atomic coordinate files for visualization and download. The database is accompanied by a user-friendly graphical user interface (GUI). It features interactive displays of polysaccharide structures and customized search options for beginners and experts, respectively. The site also serves as an information portal for polysaccharide structure determination techniques. The web-interface also references external links where other carbohydrate-related resources are available. PolySac3DB is established to maintain information on the detailed 3D structures of polysaccharides. All the data and features are available via the web-interface utilizing the search engine and can be accessed at http://polysac3db.cermav.cnrs.fr.

Modular Approach to Instrumental Analysis.

ERIC Educational Resources Information Center

Deming, Richard L.; And Others

1982-01-01

To remedy certain deficiencies, an instrument analysis course was reorganized into six one-unit modules: optical spectroscopy, magnetic resonance, separations, electrochemistry, radiochemistry, and computers and interfacing. Selected aspects of the course are discussed. (SK)

The Role of Intuition in the Decision-Making Processes of United States Air Force Field Grade Officers

DTIC Science & Technology

1989-12-01

to the fullest extent; it has then to become effective in concrete hallucination , since, it had no direct psychological access.... But with the...even though the ears are interfaced with the auditory cortex of both sides of the brain, the interface to the opposite side is much stronger. The...melodies, and recognition of faces has been demonstrated by female infants, but not male, as early as four months of age. Because female infants hear better

LMDS Lightweight Modular Display System.

DTIC Science & Technology

1982-02-16

based on standard functions. This means that the cost to produce a particular display function can be met in the most economical fashion and at the same...not mean that the NTDS interface would be eliminated. What is anticipated is the use of ETHERNET at a low level of system interface, ie internal to...GENERATOR dSYMBOL GEN eCOMMUNICATION 3-2 The architecture of the unit’s (fig 3-4) input circuitry is based on a video table look-up ROM. The function

RosettaRemodel: A Generalized Framework for Flexible Backbone Protein Design

PubMed Central

Huang, Po-Ssu; Ban, Yih-En Andrew; Richter, Florian; Andre, Ingemar; Vernon, Robert; Schief, William R.; Baker, David

2011-01-01

We describe RosettaRemodel, a generalized framework for flexible protein design that provides a versatile and convenient interface to the Rosetta modeling suite. RosettaRemodel employs a unified interface, called a blueprint, which allows detailed control over many aspects of flexible backbone protein design calculations. RosettaRemodel allows the construction and elaboration of customized protocols for a wide range of design problems ranging from loop insertion and deletion, disulfide engineering, domain assembly, loop remodeling, motif grafting, symmetrical units, to de novo structure modeling. PMID:21909381

Graphical user interface for a neonatal parenteral nutrition decision support system.

PubMed Central

Peverini, R. L.; Beach, D. S.; Wan, K. W.; Vyhmeister, N. R.

2000-01-01

We developed and implemented a decision support system for prescribing parenteral nutrition (PN) solutions for infants in our neonatal intensive care unit. We employed a graphical user interface to provide clinical guidelines and aid the understanding of the interaction among the various ingredients that make up a PN solution. In particular, by displaying the interaction between the PN total solution volume, protein, calcium and phosphorus, we have eliminated PN orders that previously would have resulted in calcium-phosphorus precipitation errors. PMID:11079964

An Approach to Providing a User Interface for Military Computer-Aided- Instruction in 1980

DTIC Science & Technology

1975-11-01

commercial terminals is the use of a microprocessor unit ( MPU ) LSI chip controller. This technology is flexible and economical •nd can be expected to...various «•gmentt. By using an MPU and developing a software capability, tha vendor can quickly and economically satisfy a large spsctrum of user...the basis for an effective and economical jser interface to military CAI systems. •a. sicumrv CLAMincATioH or THIS P**;:^*— D*. K*fn4) ^vmm m m r

Description of a dual fail-operational redundant strapdown inertial measurement unit for integrated avionics systems research

NASA Technical Reports Server (NTRS)

Bryant, W. H.; Morrell, F. R.

1981-01-01

Attention is given to a redundant strapdown inertial measurement unit for integrated avionics. The system consists of four two-degree-of-freedom turned rotor gyros and four two-degree-of-freedom accelerometers in a skewed and separable semi-octahedral array. The unit is coupled through instrument electronics to two flight computers which compensate sensor errors. The flight computers are interfaced to the microprocessors and process failure detection, isolation, redundancy management and flight control/navigation algorithms. The unit provides dual fail-operational performance and has data processing frequencies consistent with integrated avionics concepts presently planned.

The science of neural interface systems.

PubMed

Hatsopoulos, Nicholas G; Donoghue, John P

2009-01-01

The ultimate goal of neural interface research is to create links between the nervous system and the outside world either by stimulating or by recording from neural tissue to treat or assist people with sensory, motor, or other disabilities of neural function. Although electrical stimulation systems have already reached widespread clinical application, neural interfaces that record neural signals to decipher movement intentions are only now beginning to develop into clinically viable systems to help paralyzed people. We begin by reviewing state-of-the-art research and early-stage clinical recording systems and focus on systems that record single-unit action potentials. We then address the potential for neural interface research to enhance basic scientific understanding of brain function by offering unique insights in neural coding and representation, plasticity, brain-behavior relations, and the neurobiology of disease. Finally, we discuss technical and scientific challenges faced by these systems before they are widely adopted by severely motor-disabled patients.

Data recording and playback on video tape--a multi-channel analog interface for a digital audio processor system.

PubMed

Blaettler, M; Bruegger, A; Forster, I C; Lehareinger, Y

1988-03-01

The design of an analog interface to a digital audio signal processor (DASP)-video cassette recorder (VCR) system is described. The complete system represents a low-cost alternative to both FM instrumentation tape recorders and multi-channel chart recorders. The interface or DASP input-output unit described in this paper enables the recording and playback of up to 12 analog channels with a maximum of 12 bit resolution and a bandwidth of 2 kHz per channel. Internal control and timing in the recording component of the interface is performed using ROMs which can be reprogrammed to suit different analog-to-digital converter hardware. Improvement in the bandwidth specifications is possible by connecting channels in parallel. A parallel 16 bit data output port is provided for direct transfer of the digitized data to a computer.

Electronic Reconstruction at the Isopolar LaTiO3/LaFeO3 Interface: An X-Ray Photoemission and Density-Functional Theory Study

NASA Astrophysics Data System (ADS)

Kleibeuker, J. E.; Zhong, Z.; Nishikawa, H.; Gabel, J.; Müller, A.; Pfaff, F.; Sing, M.; Held, K.; Claessen, R.; Koster, G.; Rijnders, G.

2014-12-01

We report the formation of a nonmagnetic band insulator at the isopolar interface between the antiferromagnetic Mott-Hubbard insulator LaTiO3 and the antiferromagnetic charge transfer insulator LaFeO3. By density-functional theory calculations, we find that the formation of this interface state is driven by the combination of O band alignment and crystal field splitting energy of the t2 g and eg bands. As a result of these two driving forces, the Fe 3 d bands rearrange and electrons are transferred from Ti to Fe. This picture is supported by x-ray photoelectron spectroscopy, which confirms the rearrangement of the Fe 3 d bands and reveals an unprecedented charge transfer up to 1.2 ±0.2 e-/interface unit cell in our LaTiO3/LaFeO3 heterostructures.

The application of autostereoscopic display in smart home system based on mobile devices

NASA Astrophysics Data System (ADS)

Zhang, Yongjun; Ling, Zhi

2015-03-01

Smart home is a system to control home devices which are more and more popular in our daily life. Mobile intelligent terminals based on smart homes have been developed, make remote controlling and monitoring possible with smartphones or tablets. On the other hand, 3D stereo display technology developed rapidly in recent years. Therefore, a iPad-based smart home system adopts autostereoscopic display as the control interface is proposed to improve the userfriendliness of using experiences. In consideration of iPad's limited hardware capabilities, we introduced a 3D image synthesizing method based on parallel processing with Graphic Processing Unit (GPU) implemented it with OpenGL ES Application Programming Interface (API) library on IOS platforms for real-time autostereoscopic displaying. Compared to the traditional smart home system, the proposed system applied autostereoscopic display into smart home system's control interface enhanced the reality, user-friendliness and visual comfort of interface.

Molecular Dynamics Study of the Bulk and Interface Properties of Frother and Oil with Saltwater and Air

DOE PAGES

Chong, Leebyn; Lai, Yungchieh; Gray, McMahan; ...

2017-03-15

For water treatment purposes, the separation processes involving surfactants and crude oil at seawater-air interfaces are of importance for chemical and energy industries. Little progress has been made in understanding the nanoscale phenomena of surfactants on oily saltwater-air interfaces. This work focuses on using molecular dynamics with a united-atom force field to simulate the interface of linear alkane oil, saltwater, and air with three surfactant frothers: methyl isobutyl carbinol (MIBC), terpineol, and ethyl glycol butyl ether (EGBE). For each frother, although the calculated diffusivities and viscosities are lower than the expected experimental values, our results showed that diffusivity trends betweenmore » each frother agree with experiments but was not suitable for viscosity. Binary combinations of liquid (frother or saltwater)-air and liquid-liquid interfaces are equilibrated to study the density profiles and interfacial tensions. The calculated surface tensions of the frothers-air interfaces are like that of oil-air, but lower than that of saltwater-air. Only MIBC-air and terpineol-air interfaces agreed with our experimental measurements. For frother-saltwater interfaces, the calculated results showed that terpineol has interfacial tensions higher than those of the MIBC-saltwater. Here, the simulated results indicated that the frother-oil systems underwent mixing such that the density profiles depicted large interfacial thicknesses.« less

Molecular Dynamics Study of the Bulk and Interface Properties of Frother and Oil with Saltwater and Air

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chong, Leebyn; Lai, Yungchieh; Gray, McMahan

For water treatment purposes, the separation processes involving surfactants and crude oil at seawater-air interfaces are of importance for chemical and energy industries. Little progress has been made in understanding the nanoscale phenomena of surfactants on oily saltwater-air interfaces. This work focuses on using molecular dynamics with a united-atom force field to simulate the interface of linear alkane oil, saltwater, and air with three surfactant frothers: methyl isobutyl carbinol (MIBC), terpineol, and ethyl glycol butyl ether (EGBE). For each frother, although the calculated diffusivities and viscosities are lower than the expected experimental values, our results showed that diffusivity trends betweenmore » each frother agree with experiments but was not suitable for viscosity. Binary combinations of liquid (frother or saltwater)-air and liquid-liquid interfaces are equilibrated to study the density profiles and interfacial tensions. The calculated surface tensions of the frothers-air interfaces are like that of oil-air, but lower than that of saltwater-air. Only MIBC-air and terpineol-air interfaces agreed with our experimental measurements. For frother-saltwater interfaces, the calculated results showed that terpineol has interfacial tensions higher than those of the MIBC-saltwater. Here, the simulated results indicated that the frother-oil systems underwent mixing such that the density profiles depicted large interfacial thicknesses.« less

Structural Interface Forms and Their Involvement in Stabilization of Multidomain Proteins or Protein Complexes.

PubMed

Dygut, Jacek; Kalinowska, Barbara; Banach, Mateusz; Piwowar, Monika; Konieczny, Leszek; Roterman, Irena

2016-10-18

The presented analysis concerns the inter-domain and inter-protein interface in protein complexes. We propose extending the traditional understanding of the protein domain as a function of local compactness with an additional criterion which refers to the presence of a well-defined hydrophobic core. Interface areas in selected homodimers vary with respect to their contribution to share as well as individual (domain-specific) hydrophobic cores. The basic definition of a protein domain, i.e., a structural unit characterized by tighter packing than its immediate environment, is extended in order to acknowledge the role of a structured hydrophobic core, which includes the interface area. The hydrophobic properties of interfaces vary depending on the status of interacting domains-In this context we can distinguish: (1) Shared hydrophobic cores (spanning the whole dimer); (2) Individual hydrophobic cores present in each monomer irrespective of whether the dimer contains a shared core. Analysis of interfaces in dystrophin and utrophin indicates the presence of an additional quasi-domain with a prominent hydrophobic core, consisting of fragments contributed by both monomers. In addition, we have also attempted to determine the relationship between the type of interface (as categorized above) and the biological function of each complex. This analysis is entirely based on the fuzzy oil drop model.

Creep and stress relaxation induced by interface diffusion in metal matrix composites

NASA Astrophysics Data System (ADS)

Li, Yinfeng; Li, Zhonghua

2013-03-01

An analytical solution is developed to predict the creep rate induced by interface diffusion in unidirectional fiber-reinforced and particle reinforced composites. The driving force for the interface diffusion is the normal stress acting on the interface, which is obtained from rigorous Eshelby inclusion theory. The closed-form solution is an explicit function of the applied stress, volume fraction and radius of the fiber, as well as the modulus ratio between the fiber and the matrix. It is interesting that the solution is formally similar to that of Coble creep in polycrystalline materials. For the application of the present solution in the realistic composites, the scale effect is taken into account by finite element analysis based on a unit cell. Based on the solution, a closed-form solution is also given as a description of stress relaxation induced by interfacial diffusion under constant strain. In addition, the analytical solution for the interface stress presented in this study gives some insight into the relationship between the interface diffusion and interface slip. This work was supported by the financial support from the Nature Science Foundation of China (No. 10932007), the National Basic Research Program of China (No. 2010CB631003/5), and the Doctoral Program of Higher Education of China (No. 20100073110006).

The Telecommunications and Data Acquisition Report

NASA Technical Reports Server (NTRS)

Posner, E. C. (Editor)

1989-01-01

Deep Space Network advanced systems, very large scale integration architecture for decoders, radar interface and control units, microwave time delays, microwave antenna holography, and a radio frequency interference survey are among the topics discussed.

Earth Observing System/Advanced Microwave Sounding Unit-A (EOS/AMSU-A): Firmware Requirements

NASA Technical Reports Server (NTRS)

Schwantje, Robert

1995-01-01

This Firmware Requirements Document specifies the functional, performance, and interface requirements of the firmware. It also specifies the major characteristics, implementation constraints, and design goals of the firmware.

The PennBMBI: Design of a General Purpose Wireless Brain-Machine-Brain Interface System.

PubMed

Liu, Xilin; Zhang, Milin; Subei, Basheer; Richardson, Andrew G; Lucas, Timothy H; Van der Spiegel, Jan

2015-04-01

In this paper, a general purpose wireless Brain-Machine-Brain Interface (BMBI) system is presented. The system integrates four battery-powered wireless devices for the implementation of a closed-loop sensorimotor neural interface, including a neural signal analyzer, a neural stimulator, a body-area sensor node and a graphic user interface implemented on the PC end. The neural signal analyzer features a four channel analog front-end with configurable bandpass filter, gain stage, digitization resolution, and sampling rate. The target frequency band is configurable from EEG to single unit activity. A noise floor of 4.69 μVrms is achieved over a bandwidth from 0.05 Hz to 6 kHz. Digital filtering, neural feature extraction, spike detection, sensing-stimulating modulation, and compressed sensing measurement are realized in a central processing unit integrated in the analyzer. A flash memory card is also integrated in the analyzer. A 2-channel neural stimulator with a compliance voltage up to ± 12 V is included. The stimulator is capable of delivering unipolar or bipolar, charge-balanced current pulses with programmable pulse shape, amplitude, width, pulse train frequency and latency. A multi-functional sensor node, including an accelerometer, a temperature sensor, a flexiforce sensor and a general sensor extension port has been designed. A computer interface is designed to monitor, control and configure all aforementioned devices via a wireless link, according to a custom designed communication protocol. Wireless closed-loop operation between the sensory devices, neural stimulator, and neural signal analyzer can be configured. The proposed system was designed to link two sites in the brain, bridging the brain and external hardware, as well as creating new sensory and motor pathways for clinical practice. Bench test and in vivo experiments are performed to verify the functions and performances of the system.

Two-Dimensional VO2 Mesoporous Microarrays for High-Performance Supercapacitor

NASA Astrophysics Data System (ADS)

Fan, Yuqi; Ouyang, Delong; Li, Bao-Wen; Dang, Feng; Ren, Zongming

2018-05-01

Two-dimensional (2D) mesoporous VO2 microarrays have been prepared using an organic-inorganic liquid interface. The units of microarrays consist of needle-like VO2 particles with a mesoporous structure, in which crack-like pores with a pore size of about 2 nm and depth of 20-100 nm are distributed on the particle surface. The liquid interface acts as a template for the formation of the 2D microarrays, as identified from the kinetic observation. Due to the mesoporous structure of the units and high conductivity of the microarray, such 2D VO2 microarrays exhibit a high specific capacitance of 265 F/g at 1 A/g and excellent rate capability (182 F/g at 10 A/g) and cycling stability, suggesting the effect of unique microstructure for improving the electrochemical performance.

The high speed interconnect system architecture and operation

NASA Astrophysics Data System (ADS)

Anderson, Steven C.

The design and operation of a fiber-optic high-speed interconnect system (HSIS) being developed to meet the requirements of future avionics and flight-control hardware with distributed-system architectures are discussed. The HSIS is intended for 100-Mb/s operation of a local-area network with up to 256 stations. It comprises a bus transmission system (passive star couplers and linear media linked by active elements) and network interface units (NIUs). Each NIU is designed to perform the physical, data link, network, and transport functions defined by the ISO OSI Basic Reference Model (1982 and 1983) and incorporates a fiber-optic transceiver, a high-speed protocol based on the SAE AE-9B linear token-passing data bus (1986), and a specialized application interface unit. The operating modes and capabilities of HSIS are described in detail and illustrated with diagrams.

Three-dimensional modeling of glucose-6-phosphate dehydrogenase-deficient variants from German ancestry.

PubMed

Kiani, Farooq; Schwarzl, Sonja; Fischer, Stefan; Efferth, Thomas

2007-07-18

Loss of function of dimeric glucose-6-phosphate dehydrogenase (G6PD) represents the most common inborn error of metabolism throughout the world affecting an estimated 400 million people. In Germany, this enzymopathy is very rare. On the basis of G6PD crystal structures, we have analyzed six G6PD variants of German ancestry by three-dimensional modeling. All mutations present in the German population are either close to one of the three G6P or NADP(+) units or to the interface of the two monomers. Two of the three mutated amino acids of G6PD Vancouver are closer to the binding site of NADP(+). The G6PD Aachen mutation is also closer to the second NADP(+) unit. The G6PD Wayne mutation is closer to the G6P binding region. These mutations may affect the binding of G6P and NADP(+) units. Three mutations, i.e. G6PD Munich, G6PD Riverside and G6PD Gastonia, lie closer to the interface of the two monomers. These may also affect the interface of two monomers. None of these G6PD variants share mutations with the common G6PD variants known from the Mediterranean, Near East, or Africa indicating that they have developed independently. The G6PD variants have been compared with mutants from other populations and the implications for survival of G6PD variants from natural selection have been discussed.

Smoke modeling in support of management of forest landscapes in the eastern United States

Treesearch

Gary L. Achtemeier

2009-01-01

The impact of smoke from forest burning on air quality is a threat to the use of prescribed fire to manage woodlands in the eastern United States. Population shifts from urban centers to the wildland/urban interface have increased human exposures to smoke. Tighter national ambient air quality standards restrict the amount of smoke released over an area. This article...

Organic-inorganic Interface in Nacre: Learning Lessons from Nature

NASA Astrophysics Data System (ADS)

Rahbar, Nima; Askarinejad, Sina

Problem-solving strategies of naturally growing composites such as nacre give us a fantastic vision to design and fabricate tough, stiff while strong composites. To provide the outstanding mechanical functions, nature has evolved complex and effective functionally graded interfaces. Particularly in nacre, organic-inorganic interface in which the proteins behave stiffer and stronger in proximity of calcium carbonate minerals provide an impressive role in structural integrity and mechanical deformation of the natural composite. The well-known shear-lag theory was employed on a simplified two-dimensional unit-cell of the multilayered composite considering the interface properties. The closed-form solutions for the displacements in the elastic components as a function of constituent properties can be used to calculate the effective mechanical properties of composite such as elastic modulus, strength and work-to-failure. The results solve the important mysteries about nacre and emphasize on the role of organic-inorganic interface properties and mineral bridges. Our results show that the properties of proteins in proximity of mineral bridges are also significant. More studies need to be performed on the strategies to enhance the interface properties in manmade composites. NSF Career Award no. 1281264.

Dependence of surface tension on curvature obtained from a diffuse-interface approach

NASA Astrophysics Data System (ADS)

Badillo, Arnoldo; Lafferty, Nathan; Matar, Omar K.

2017-11-01

From a sharp-interface viewpoint, the surface tension force is f = σκδ (x -xi) n , where σ is the surface tension, κ the local interface curvature, δ the delta function, and n the unit normal vector. The numerical implementation of this force on discrete domains poses challenges that arise from the calculation of the curvature. The continuous surface tension force model, proposed by Brackbill et al. (1992), is an alternative, used commonly in two-phase computational models. In this model, δ is replaced by the gradient of a phase indicator field, whose integral across a diffuse-interface equals unity. An alternative to the Brackbill model are Phase-Field models, which do not require an explicit calculation of the curvature. However, and just as in Brackbill's approach, there are numerical errors that depend on the thickness of the diffuse interface, the grid spacing, and the curvature. We use differential geometry to calculate the leading errors in this force when obtained from a diffuse-interface approach, and outline possible routes to eliminate them. Our results also provide a simple geometrical explanation to the dependence of surface tension on curvature, and to the problem of line tension.

A three-dimensional polyhedral unit model for grain boundary structure in fcc metals

NASA Astrophysics Data System (ADS)

Banadaki, Arash Dehghan; Patala, Srikanth

2017-03-01

One of the biggest challenges in developing truly bottom-up models for the performance of polycrystalline materials is the lack of robust quantitative structure-property relationships for interfaces. As a first step in analyzing such relationships, we present a polyhedral unit model to classify the geometrical nature of atomic packing along grain boundaries. While the atomic structure in disordered systems has been a topic of interest for many decades, geometrical analyses of grain boundaries has proven to be particularly challenging because of the wide range of structures that are possible depending on the underlying macroscopic crystallographic character. In this article, we propose an algorithm that can partition the atomic structure into a connected array of three-dimensional polyhedra, and thus, present a three-dimensional polyhedral unit model for grain boundaries. A point-pattern matching algorithm is also provided for quantifying the distortions of the observed grain boundary polyhedral units. The polyhedral unit model is robust enough to capture the structure of high-Σ, mixed character interfaces and, hence, provides a geometric tool for comparing grain boundary structures across the five-parameter crystallographic phase-space. Since the obtained polyhedral units circumscribe the voids present in the structure, such a description provides valuable information concerning segregation sites within the grain boundary. We anticipate that this technique will serve as a powerful tool in the analysis of grain boundary structure. The polyhedral unit model is also applicable to a wide array of material systems as the proposed algorithm is not limited by the underlying lattice structure.

Defect assisted coupling of a MoS2/TiO2 interface and tuning of its electronic structure.

PubMed

Chen, Guifeng; Song, Xiaolin; Guan, Lixiu; Chai, Jianwei; Zhang, Hui; Wang, Shijie; Pan, Jisheng; Tao, Junguang

2016-09-02

Although MoS2 based heterostructures have drawn increased attention, the van der Waals forces within MoS2 layers make it difficult for the layers to form strong chemical coupled interfaces with other materials. In this paper, we demonstrate the successful strong chemical attachment of MoS2 on TiO2 nanobelts after appropriate surface modifications. The etch-created dangling bonds on TiO2 surfaces facilitate the formation of a steady chemically bonded MoS2/TiO2 interface. With the aid of high resolution transmission electron microscope measurements, the in-plane structure registry of MoS2/TiO2 is unveiled at the atomic scale, which shows that MoS2[1-10] grows along the direction of TiO2[001] and MoS2[110] parallel to TiO2[100] with every six units of MoS2 superimposed on five units of TiO2. Electronically, type II band alignments are realized for all surface treatments. Moreover, the band offsets are delicately correlated to the surface states, which plays a significant role in their photocatalytic performance.

The hybrid UNIX controller for real-time data acquisition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huesman, R.H.; Klein, G.J.; Fleming, T.K.

1996-06-01

The authors describe a hybrid data acquisition architecture integrating a conventional UNIX workstation with CAMAC-based real-time hardware. The system combines the high-level programming simplicity and user interface of a UNIX workstation with the low-level timing control available from conventional real-time hardware. They detail this architecture as it has been implemented for control of the Donner 600-Crystal Positron Tomograph (PET600). Low-level data acquisition is carried out in this system using eight LeCroy 3588 histogrammers, which together after derandomization, acquire events at rates up to 4 MHz, and two dedicated Motorola 6809 microprocessors, which arbitrate fine timing control during acquisition. A SUNmore » Microsystems UNIX workstation is used for high-level control, allowing an easily extensible user interface in an X-Windows environment, as well as real-time communications to the low-level acquisition units. Communication between the high- and low-level units is carried out via a Jorway 73A SCSI-CAMAC crate controller and a serial interface. For this application, the hybrid configuration segments low from high-level control for ease of maintenance and provided a low-cost upgrade from dated high-level control hardware.« less

Structural properties of atactic polystyrene adsorbed onto solid surfaces.

PubMed

Tatek, Yergou B; Tsige, Mesfin

2011-11-07

In the present work, we are studying the local conformation of chains in a thin film of polystyrene adsorbed on a solid substrate by using atomistically detailed simulations. The simulations are carried out by using the readily available and massively parallel molecular dynamics code known as LAMMPS. In particular, a special emphasis is given to the density and orientation of side chains (which consist of phenyl groups and methylene units) at solid/polymer and polymer/vacuum interfaces. Three types of substrates were used in our study: α-quartz, graphite, and amorphous silica. Our investigation was restricted to atactic polystyrene. Our results show that the density and structural properties of side chains depend on the type of surface. An excess of phenyl rings is observed near the α-quartz substrate while the film adsorbed on graphite is depleted in C(6)H(5). Moreover, the orientation of the rings and methylene units on the substrate/film interface show a strong dependence on the type of the substrate, while the rings at the film/vacuum interface show a marked tendency to point outward, away from the film. The results we obtained are in a large part in good agreement with previous experimental and simulation results.

An expert system shell for inferring vegetation characteristics: Interface for the addition of techniques (Task H)

NASA Technical Reports Server (NTRS)

Harrison, P. Ann

1993-01-01

All the NASA VEGetation Workbench (VEG) goals except the Learning System provide the scientist with several different techniques. When VEG is run, rules assist the scientist in selecting the best of the available techniques to apply to the sample of cover type data being studied. The techniques are stored in the VEG knowledge base. The design and implementation of an interface that allows the scientist to add new techniques to VEG without assistance from the developer were completed. A new interface that enables the scientist to add techniques to VEG without assistance from the developer was designed and implemented. This interface does not require the scientist to have a thorough knowledge of Knowledge Engineering Environment (KEE) by Intellicorp or a detailed knowledge of the structure of VEG. The interface prompts the scientist to enter the required information about the new technique. It prompts the scientist to enter the required Common Lisp functions for executing the technique and the left hand side of the rule that causes the technique to be selected. A template for each function and rule and detailed instructions about the arguments of the functions, the values they should return, and the format of the rule are displayed. Checks are made to ensure that the required data were entered, the functions compiled correctly, and the rule parsed correctly before the new technique is stored. The additional techniques are stored separately from the VEG knowledge base. When the VEG knowledge base is loaded, the additional techniques are not normally loaded. The interface allows the scientist the option of adding all the previously defined new techniques before running VEG. When the techniques are added, the required units to store the additional techniques are created automatically in the correct places in the VEG knowledge base. The methods file containing the functions required by the additional techniques is loaded. New rule units are created to store the new rules. The interface that allow the scientist to select which techniques to use is updated automatically to include the new techniques. Task H was completed. The interface that allows the scientist to add techniques to VEG was implemented and comprehensively tested. The Common Lisp code for the Add Techniques system is listed in Appendix A.

Biological oxygen apparent transmissibility of hydrogel contact lenses with and without organosilicon moieties.

PubMed

Compañ, V; López-Alemany, A; Riande, E; Refojo, M F

2004-01-01

The instrument oxygen transmissibility (IOT) of organosilicon hydrogels, measured by electrochemical procedures, is 5-10 times larger than that of conventional hydrogels. A method is described that allows the estimation of the oxygen tension at the lens-cornea interface for closed- and open-eyelids situations by combining the IOT of the hydrogels and corneal parameters such as corneal thickness, corneal permeability and oxygen flux across the cornea. From these results the biological oxygen apparent transmissibility (BOAT) is obtained, an important parameter which an multiplication with the pressure of oxygen on the external part of the lens gives the oxygen flux onto the cornea. Contact lenses with oxygen transmissibility higher than 100 Dk/t units [1 Dk/t unit=10(-9) [cm(3) O(2) (STp) cm(-2)s(-1)(mmHg)(-1)] posses a large oxygen tension at the lens-cornea interface that substantially reduces the oxygen flux onto the cornea. Lenses whose oxygen transmissibility is lower than 50 Dk/t units allow a rather small oxygen flux onto the cornea under closed eyelids condition that prevent their use for extended wear.

Fiber Optic Cable Feedthrough and Sealing

NASA Technical Reports Server (NTRS)

Fan, Robert J.

1998-01-01

A novel fiberoptic hermetic bulkhead feedthrough has been developed which will offer cryogenic sealing at leak rates of 10(exp -11) cc/sec helium. This feedthrough was developed for NASA in response to needs for a hermetically sealed feedthrough which could withstand a range of temperatures from low cryogenic (-196 C), due to liquid fuels and oxidizers, to high temperatures (+200 C) encountered in the proximity of combustion gasses. The development effort will be reported from conceptual design of single and multi-channel feedthrough units with single interconnection interfaces to units with double-ended interconnection interfaces. Various combinations of fiber/buffers are reported with recommendations based on test results. A comprehensive series of environmental and mechanical tests were performed to evaluate the feedthroughs in adverse conditions. Test results are reported including insertion loss, salt spray, sinusoidal vibration, random vibration, mechanical shock, thermal shock and humidity. A second set of feedthrough units was exposed to 3 different types of radiation. Optical transmittance changes during the tests were monitored and leak rate testing was done after each test. State-of-the-art technology in optical fiber feedthroughs constructed with polycrystalline ceramic is presented.

Controller and interface module for the High-Speed Data Acquisition System correlator/accumulator

NASA Technical Reports Server (NTRS)

Brokl, S. S.

1985-01-01

One complex channel of the High-Speed Data Acquisition System (a subsystem used in the Goldstone solar system radar), consisting of two correlator modules and one accumulator module, is operated by the controller and interface module interfaces are provided to the VAX UNIBUS for computer control, monitor, and test of the controller and correlator/accumulator. The correlator and accumulator modules controlled by this module are the key digital signal processing elements of the Goldstone High-Speed Data Acquisition System. This fully programmable unit provides for a wide variety of correlation and filtering functions operating on a three megaword/second data flow. Data flow is to the VAX by way of the I/O port of a FPS 5210 array processor.

A well-posed numerical method to track isolated conformal map singularities in Hele-Shaw flow

NASA Technical Reports Server (NTRS)

Baker, Gregory; Siegel, Michael; Tanveer, Saleh

1995-01-01

We present a new numerical method for calculating an evolving 2D Hele-Shaw interface when surface tension effects are neglected. In the case where the flow is directed from the less viscous fluid into the more viscous fluid, the motion of the interface is ill-posed; small deviations in the initial condition will produce significant changes in the ensuing motion. This situation is disastrous for numerical computation, as small round-off errors can quickly lead to large inaccuracies in the computed solution. Our method of computation is most easily formulated using a conformal map from the fluid domain into a unit disk. The method relies on analytically continuing the initial data and equations of motion into the region exterior to the disk, where the evolution problem becomes well-posed. The equations are then numerically solved in the extended domain. The presence of singularities in the conformal map outside of the disk introduces specific structures along the fluid interface. Our method can explicitly track the location of isolated pole and branch point singularities, allowing us to draw connections between the development of interfacial patterns and the motion of singularities as they approach the unit disk. In particular, we are able to relate physical features such as finger shape, side-branch formation, and competition between fingers to the nature and location of the singularities. The usefulness of this method in studying the formation of topological singularities (self-intersections of the interface) is also pointed out.

Minimally-Invasive Neural Interface for Distributed Wireless Electrocorticogram Recording Systems

PubMed Central

Chang, Sun-Il

2018-01-01

This paper presents a minimally-invasive neural interface for distributed wireless electrocorticogram (ECoG) recording systems. The proposed interface equips all necessary components for ECoG recording, such as the high performance front-end integrated circuits, a fabricated flexible microelectrode array, and wireless communication inside a miniaturized custom-made platform. The multiple units of the interface systems can be deployed to cover a broad range of the target brain region and transmit signals via a built-in intra-skin communication (ISCOM) module. The core integrated circuit (IC) consists of 16-channel, low-power push-pull double-gated preamplifiers, in-channel successive approximation register analog-to-digital converters (SAR ADC) with a single-clocked bootstrapping switch and a time-delayed control unit, an ISCOM module for wireless data transfer through the skin instead of a power-hungry RF wireless transmitter, and a monolithic voltage/current reference generator to support the aforementioned analog and mixed-signal circuit blocks. The IC was fabricated using 250 nm CMOS processes in an area of 3.2 × 0.9 mm2 and achieved the low-power operation of 2.5 µW per channel. Input-referred noise was measured as 5.62 µVrms for 10 Hz to 10 kHz and ENOB of 7.21 at 31.25 kS/s. The implemented system successfully recorded multi-channel neural activities in vivo from a primate and demonstrated modular expandability using the ISCOM with power consumption of 160 µW. PMID:29342103

Minimally-Invasive Neural Interface for Distributed Wireless Electrocorticogram Recording Systems.

PubMed

Chang, Sun-Il; Park, Sung-Yun; Yoon, Euisik

2018-01-17

This paper presents a minimally-invasive neural interface for distributed wireless electrocorticogram (ECoG) recording systems. The proposed interface equips all necessary components for ECoG recording, such as the high performance front-end integrated circuits, a fabricated flexible microelectrode array, and wireless communication inside a miniaturized custom-made platform. The multiple units of the interface systems can be deployed to cover a broad range of the target brain region and transmit signals via a built-in intra-skin communication (ISCOM) module. The core integrated circuit (IC) consists of 16-channel, low-power push-pull double-gated preamplifiers, in-channel successive approximation register analog-to-digital converters (SAR ADC) with a single-clocked bootstrapping switch and a time-delayed control unit, an ISCOM module for wireless data transfer through the skin instead of a power-hungry RF wireless transmitter, and a monolithic voltage/current reference generator to support the aforementioned analog and mixed-signal circuit blocks. The IC was fabricated using 250 nm CMOS processes in an area of 3.2 × 0.9 mm² and achieved the low-power operation of 2.5 µW per channel. Input-referred noise was measured as 5.62 µV rms for 10 Hz to 10 kHz and ENOB of 7.21 at 31.25 kS/s. The implemented system successfully recorded multi-channel neural activities in vivo from a primate and demonstrated modular expandability using the ISCOM with power consumption of 160 µW.

Flexible microelectrode array for interfacing with the surface of neural ganglia

NASA Astrophysics Data System (ADS)

Sperry, Zachariah J.; Na, Kyounghwan; Parizi, Saman S.; Chiel, Hillel J.; Seymour, John; Yoon, Euisik; Bruns, Tim M.

2018-06-01

Objective. The dorsal root ganglia (DRG) are promising nerve structures for sensory neural interfaces because they provide centralized access to primary afferent cell bodies and spinal reflex circuitry. In order to harness this potential, new electrode technologies are needed which take advantage of the unique properties of DRG, specifically the high density of neural cell bodies at the dorsal surface. Here we report initial in vivo results from the development of a flexible non-penetrating polyimide electrode array interfacing with the surface of ganglia. Approach. Multiple layouts of a 64-channel iridium electrode (420 µm2) array were tested, with pitch as small as 25 µm. The buccal ganglia of invertebrate sea slug Aplysia californica were used to develop handling and recording techniques with ganglionic surface electrode arrays (GSEAs). We also demonstrated the GSEA’s capability to record single- and multi-unit activity from feline lumbosacral DRG related to a variety of sensory inputs, including cutaneous brushing, joint flexion, and bladder pressure. Main results. We recorded action potentials from a variety of Aplysia neurons activated by nerve stimulation, and units were observed firing simultaneously on closely spaced electrode sites. We also recorded single- and multi-unit activity associated with sensory inputs from feline DRG. We utilized spatial oversampling of action potentials on closely-spaced electrode sites to estimate the location of neural sources at between 25 µm and 107 µm below the DRG surface. We also used the high spatial sampling to demonstrate a possible spatial sensory map of one feline’s DRG. We obtained activation of sensory fibers with low-amplitude stimulation through individual or groups of GSEA electrode sites. Significance. Overall, the GSEA has been shown to provide a variety of information types from ganglia neurons and to have significant potential as a tool for neural mapping and interfacing.

Role of interface layers on Tunneling Magnetoresistance

NASA Astrophysics Data System (ADS)

Yang, See-Hun; Samant, Mahesh; Parkin, Stuart S. P.

2002-03-01

Thin non-magnetic metallic layers inserted at the interface between tunneling barriers and the ferromagnetic electrodes in magnetic tunnel junctions quenches the magnetoresistance (TMR) exhibited by some structures[1]. Studies have been carried out on exchange biased magnetic tunnel junction structures in which one of the ferromagnetic electrodes is pinned by coupling to IrMn or PtMn antiferromagnetic layers. For metallic aluminum interface layers thicknesses of just a few angstrom completely suppress the TMR although this characteristic thickness depends on the roughness of the tunneling barrier. A variety of structures will be discussed in which a number of interface layers have been introduced. In particular results for insertion of Cu, Ru and Cr layers on either side of the tunnel barrier will be presented. A number of techniques including XANES, XMCD and high resolution cross-section transmission electron microscopy have been used to study the structure and morphology of the interface layers and to correlate the structure of these layers with the magneto-transport properties of the tunneling junctions. [1] S.S.P. Parkin, US patent 5,764,567 issued by the United States Patent and Trademark Office, June 9, 1998.

Evolution of the 1-mlb mercury ion thruster subsystem

NASA Technical Reports Server (NTRS)

Kerslake, W. R.; Banks, B. A.

1978-01-01

The developmental history, performance, and major lifetests of each component of the present 1-mlb (4.5 mN) thruster system are traced over the past 10 years. The 1-mlb thruster subsystem consists of an 8 cm diameter ion thruster mounted on 2 axis gimbals, a mercury propellant tank, a power electronics unit, a controller/digital interface unit, and necessary electrical harnesses plus propellant tankage and feed lines.

Design and Analysis of an Attitude Determination and Control Subsystem (ADCS) for AFIT’s 6U Standard Bus

DTIC Science & Technology

2014-03-27

Fault Detection and Isolation GUI Graphical User Interface IGRF International Geomagnetic Reference Field IMU Inertial Measurement Unit IR infrared xv...ADCS hardware components were either commercially purchased or built in-house and include an Inertial Measurement Unit ( IMU ), external magnetometer, 4...3.2.1.3 IMU . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 3.2.1.4 External Magnetometer . . . . . . . . . . . . . . . . . . 48 3.2.2

STS-44 Mission Specialist (MS) Runco floats on OV-104's middeck

NASA Technical Reports Server (NTRS)

1991-01-01

STS-44 Mission Specialist (MS) Mario Runco, Jr, wearing communications kit assembly headset (HDST), freefloats on the middeck of Atlantis, Orbiter Vehicle (OV) 104. HDST interface unit (HIU) is strapped to Runco's thigh. Note that his back is against the middeck ceiling, his feet at the port side wall, and his left hand at the forward lockers. Runco is also wearing a United States Navy t-shirt.

Manned maneuvering unit latching mechanism

NASA Technical Reports Server (NTRS)

Allton, C. S.

1980-01-01

The astronaut/Manned Maneuvering Unit interface, which presented a challenging set of requirements for a latching mechanism, is described. A spring loaded cam segment with variable ratio pulley release actuator was developed to meet the requirements. To preclude jamming of the mechanism, special precautions were taken such as spring loaded bearing points and careful selection of materials to resist cold welding. The mechanism successfully passed a number of tests which partially simulated orbital conditions.

An analysis of the public discourse about urban sprawl in the United States: Monitoring concern about a major threat to forests

Treesearch

David N. Bengston; Robert S. Potts; David P. Fan; Edward G. Goetz

2005-01-01

Urban sprawl has been identified as a serious threat to forests and other natural areas in the United States, and public concern about the impacts of sprawling development patterns has grown in recent years. The prominence of public concern about sprawl is germane to planners, managers, and policymakers involved in efforts to protect interface forests from urban...

Advanced Extravehicular Mobility Unit Informatics Software Design

NASA Technical Reports Server (NTRS)

Wright, Theodore

2014-01-01

This is a description of the software design for the 2013 edition of the Advanced Extravehicular Mobility Unit (AEMU) Informatics computer assembly. The Informatics system is an optional part of the space suit assembly. It adds a graphical interface for displaying suit status, timelines, procedures, and caution and warning information. In the future it will display maps with GPS position data, and video and still images captured by the astronaut.

Design of self-contained sensor for monitoring of deep-sea offshore platform

NASA Astrophysics Data System (ADS)

Song, Yang; Yu, Yan; Zhang, Chunwei; Dong, Weijie; Ou, Jinping

2013-04-01

Offshore platform, which is the base of the production and living in the sea, is the most important infrastructure for developing oil and gas resources. At present, there are almost 6500 offshore platforms servicing in the 53 countries' sea areas around the world, creating great wealth for the world. In general, offshore platforms may work for 20 years, however, offshore platforms are expensive, complex, bulky, and so many of them are on extended active duty. Because of offshore platforms servicing in the harsh marine environment for a long time, the marine environment have a great impact on the offshore platforms. Besides, with the impact and erosion of seawater, and material aging, the offshore platform is possible to be in unexpected situations when a badly sudden situation happens. Therefore, it is of great significance to monitor the marine environment and offshore platforms. The self-contained sensor for deep-sea offshore platform with its unique design, can not only effectively extend the working time of the sensor with the capability of converting vibration energy to electrical energy, but also simultaneously collect the data of acceleration, inclination, temperature and humidity of the deep sea, so that we can achieve the purpose of monitoring offshore platforms through analyzing the collected data. The self-contained sensor for monitoring of deep-sea offshore platform includes sensing unit, data collecting and storage unit, the energy supply unit. The sensing unit with multi-variables, consists of an accelerometer LIS344ALH, an inclinometer SCA103T and a temperature and humidity sensor SHT11; the data collecting and storage unit includes the MSP430 low-power MCU, large capacity memory, clock circuit and the communication interface, the communication interface includes USB interface, serial ports and wireless interface; in addition, the energy supply unit, converting vibration to electrical energy to power the overall system, includes the electromagnetic generator, voltage multiplier circuit and a super capacitor which can withstand virtually unlimited number of charge-discharge cycles. When the seawater impacts on offshore platforms to produce vibration, electromagnetic generator converts vibration to electrical energy, its output(~ 1 V 50 Hz AC) is stepped up and rectified by a voltage multiplier circuit, and the energy is stored in a super capacitor. It is controlled by the MSP430 that monitors the voltage level on the super capacitor. The super capacitor charges the Li-ion battery when the voltage on the super capacitor reaches a threshold, then the whole process of energy supply is completed. The self-contained sensor for deep-sea offshore platform has good application prospects and practical value with small size, low power, being easy to install, converting vibration energy to supply power and high detection accuracy.

Lithologic and physicochemical properties and hydraulics of flow in and near the freshwater/saline-water transition zone, San Antonio segment of the Edwards aquifer, south-central Texas, based on water-level and borehole geophysical log data, 1999-2007

USGS Publications Warehouse

Lambert, Rebecca B.; Hunt, Andrew G.; Stanton, Gregory P.; Nyman, Michael B.

2010-01-01

The freshwater zone of the San Antonio segment of the Edwards aquifer in south-central Texas (hereinafter, the Edwards aquifer) is bounded to the south and southeast by a zone of transition from freshwater to saline water (hereinafter, the transition zone). The boundary between the two zones is the freshwater/saline-water interface (hereinafter, the interface), defined as the 1,000-milligrams per liter dissolved solids concentration threshold. This report presents the findings of a study, done by the U.S. Geological Survey in cooperation with the San Antonio Water System, to obtain lithologic properties (rock properties associated with known stratigraphic units) and physicochemical properties (fluid conductivity and temperature) and to analyze the hydraulics of flow in and near the transition zone of the Edwards aquifer on the basis of water-level and borehole geophysical log data collected from 15 monitoring wells in four transects during 1999-2007. No identifiable relation between conductivity values from geophysical logs in monitoring wells in all transects and equivalent freshwater heads in the wells at the times the logs were run is evident; and no identifiable relation between conductivity values and vertical flow in the boreholes concurrent with the times the logs were run is evident. The direction of the lateral equivalent freshwater head gradient and thus the potential lateral flow at the interface in the vicinity of the East Uvalde transect fluctuates between into and out of the freshwater zone, depending on recharge and withdrawals. Whether the prevailing direction on average is into or out of the freshwater zone is not clearly indicated. Equivalent freshwater head data do not indicate a prevailing direction of the lateral gradient at the interface in the vicinity of the Tri-County transect. The prevailing direction on average of the lateral gradient and thus potential lateral flow at the interface in the vicinity of the Kyle transect likely is from the transition zone into the freshwater zone. The hypothesis regarding the vertical gradient at the East Uvalde transect, and thus the potential for vertical flow near an interface conceptualized as a surface sloping upward in the direction of the dip of the stratigraphic units, is that the potential for vertical flow fluctuates between into and out of the freshwater zone, depending on recharge and withdrawals. At the Tri-County transect, a downward gradient on the fresh-water side of the interface and an upward gradient on the saline-water side are evidence of opposing potentials that appear to have stabilized the position of the interface over the range of hydrologic conditions that occurred at the times the logs were run. At the Fish Hatchery transect, an upward gradient on the saline-water side of the interface, coupled with the assumption of a sloping interface, implies a vertical gradient from the transition zone into the freshwater zone. This potential for vertical movement of the interface apparently was opposed by the potential (head) on the freshwater side of the interface that kept the interface relatively stable over the range of hydrologic conditions during which the logs were run. The five flow logs for Kyle transect freshwater well KY1 all indicate upward flow that originates from the Glen Rose Limestone, the uppermost unit of the Trinity aquifer; and one log for well KY2 shows upward flow entering the borehole from the Trinity aquifer. These flow data constitute evidence of the potential for flow from the Trinity aquifer into the Edwards aquifer in the vicinity of the Kyle transect. Subsurface temperature data indicate that flow on average is more active, or vigorous, on the freshwater side of the interface than on the saline-water side. A hydraulic connection between the transition zone and the freshwater zone is indicated by similar patterns in the hydrographs of the 15 transect monitoring wells in and near the transition zone and three county index wel

Description of a dual fail operational redundant strapdown inertial measurement unit for integrated avionics systems research

NASA Technical Reports Server (NTRS)

Bryant, W. H.; Morrell, F. R.

1981-01-01

An experimental redundant strapdown inertial measurement unit (RSDIMU) is developed as a link to satisfy safety and reliability considerations in the integrated avionics concept. The unit includes four two degree-of-freedom tuned rotor gyros, and four accelerometers in a skewed and separable semioctahedral array. These sensors are coupled to four microprocessors which compensate sensor errors. These microprocessors are interfaced with two flight computers which process failure detection, isolation, redundancy management, and general flight control/navigation algorithms. Since the RSDIMU is a developmental unit, it is imperative that the flight computers provide special visibility and facility in algorithm modification.

NASA three-laser airborne differential absorption lidar system electronics

NASA Technical Reports Server (NTRS)

Allen, R. J.; Copeland, G. D.

1984-01-01

The system control and signal conditioning electronics of the NASA three laser airborne differential absorption lidar (DIAL) system are described. The multipurpose DIAL system was developed for the remote measurement of gas and aerosol profiles in the troposphere and lower stratosphere. A brief description and photographs of the majority of electronics units developed under this contract are presented. The precision control system; which includes a master control unit, three combined NASA laser control interface/quantel control units, and three noise pulse discriminator/pockels cell pulser units; is described in detail. The need and design considerations for precision timing and control are discussed. Calibration procedures are included.

In search of transient subduction interfaces in the Dent Blanche-Sesia Tectonic System (W. Alps)

NASA Astrophysics Data System (ADS)

Angiboust, Samuel; Glodny, Johannes; Oncken, Onno; Chopin, Christian

2014-09-01

In this paper we study the Alpine metamorphic history of a major tectonic zone which formed during Alpine orogeny, the Dent Blanche Thrust (DBT). This contact, located in the Northern Western Alps, juxtaposes some ophiolitic metasediment-rich remnants of the Liguro-Piemontese ocean (Tsaté Complex) with a composite continental, km-sized complex (Dent Blanche Tectonic System, DBTS) of Adriatic affinity thrusted over the ophiolite. In order to better understand the geodynamic meaning of the DBT region and adjacent units, we have reconstructed the pressure-temperature-time-deformation (P-T-t-d) history of these two units using modern thermobarometric tools, Rb/Sr geochronology, and field relationships. We show that the Tsaté Complex is formed by a stack of km-thick calcschists-bearing tectonic slices having experienced variable maximum burial temperatures between 360 °C and 490 °C at depths of ca. 25-40 km. Associated deformation ages span a range between 37 Ma and 41 Ma. The Arolla gneissic mylonites at the base of the DBTS experienced high-pressure (12-14 kbar), top-to-NW deformation at ca. 450 °C between 43 and 48 Ma. A first age of ca. 58 Ma has been obtained for high-pressure ductile deformation in the Valpelline shear zone, atop Arolla gneisses. Some of the primary, peak metamorphic fabrics have been reworked and later backfolded during exhumation and collisional overprint (ca. 20 km depth, 37-40 Ma) leading to the regional greenschist-facies retrogression which is particularly prominent within Tsaté metasediments. We interpret the Dent Blanche Thrust, at the base of the Arolla unit, as a fossilized subduction interface active between 43 and 48 Ma. Our geochronological results on the shear zone lining the top of the Arolla unit, together with previous P-T-t estimates on equivalent blueschist-facies shear zones cutting the Sesia unit, indicate an older tectonic activity between 58 and 65 Ma. We demonstrate here that observed younger ages towards lowermost structural levels are witness of the transient, downwards migration of the Alpine early Cenozoic blueschist-facies subduction interface. This down-stepping is interpreted to reflect the progressive underplating acting between 30 and 40 km depth in the Alpine subduction zone between late Cretaceous and late Eocene. Underplating involved first continental material derived from the stretched Adriatic margin followed by underplating of ocean-derived rocks in the Eocene. These results shed light on subduction-zone accretion processes and therefore provide a new perspective for the understanding of geophysical results imaging the plate-interface region in active subduction zones.

Quiet pavement systems in Europe

DOT National Transportation Integrated Search

2005-05-01

Noise pollution is a growing concern in the United States. A major contributor of highway noise is at the tire-pavement interface, which means that quieter pavements could lead to reductions in traffic-generated noise. The Federal Highway Administrat...

Commander Truly on aft flight deck holding communication kit assembly (ASSY)

NASA Technical Reports Server (NTRS)

1983-01-01

On aft flight deck, Commander Truly holds communication kit assembly (ASSY) headset (HDST) interface unit (HIU) and mini-HDST in front of the onorbit station. HASSELBLAD camera is positioned on overhead window W8.

28-Bit serial word simulator/monitor

NASA Technical Reports Server (NTRS)

Durbin, J. W.

1979-01-01

Modular interface unit transfers data at high speeds along four channels. Device expedites variable-word-length communication between computers. Operation eases exchange of bit information by automatically reformatting coded input data and status information to match requirements of output.

23. SITE BUILDING 002 SCANNER BUILDING RADAR CONTROL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

23. SITE BUILDING 002 - SCANNER BUILDING - RADAR CONTROL INTERFACE "RCL NO. 2" WITH COMPUTER CONTROL DISC DRIVE UNITS IN FOREGROUND. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

Evaluation plan for space station network interface units

NASA Technical Reports Server (NTRS)

Weaver, Alfred C.

1990-01-01

Outlined here is a procedure for evaluating network interface units (NIUs) produced for the Space Station program. The procedures should be equally applicable to the data management system (DMS) testbed NIUs produced by Honeywell and IBM. The evaluation procedures are divided into four areas. Performance measurement tools are hardware and software that must be developed in order to evaluate NIU performance. Performance tests are a series of tests, each of which documents some specific characteristic of NIU and/or network performance. In general, these performance tests quantify the speed, capacity, latency, and reliability of message transmission under a wide variety of conditions. Functionality tests are a series of tests and code inspections that demonstrate the functionality of the particular subset of ISO protocols which have been implemented in a given NIU. Conformance tests are a series of tests which would expose whether or not selected features within the ISO protocols are present and interoperable.

Compositional and gate tuning of the interfacial conductivity in LaAlO3/LaTiO3/SrTiO3 heterostructures

NASA Astrophysics Data System (ADS)

Hosoda, Masayuki; Bell, Christopher; Hikita, Yasuyuki; Hwang, Harold Y.

2013-03-01

We investigate the effect of LaTiO3 insertion at the interface between LaAlO3 and TiO2 terminated {100} SrTiO3 for a series of LaAlO3 and LaTiO3 thicknesses. A clear increase of the carrier density was observed while the Hall mobility was largely unchanged. In structures with LaAlO3 thickness ˜3 unit cells, close to the critical thickness for conductivity, as little as 0.25 unit cells of LaTiO3 drives an insulator-to-metal transition. These samples show a strong dependence of the conductivity on voltage with electrostatic back-gating, which can be understood in a two-carrier picture, and dominated by the change in carrier density at the interface.

Active Microelectronic Neurosensor Arrays for Implantable Brain Communication Interfaces

PubMed Central

Song, Y.-K.; Borton, D. A.; Park, S.; Patterson, W. R.; Bull, C. W.; Laiwalla, F.; Mislow, J.; Simeral, J. D.; Donoghue, J. P.; Nurmikko, A. V.

2010-01-01

We have built a wireless implantable microelectronic device for transmitting cortical signals transcutaneously. The device is aimed at interfacing a microelectrode array cortical to an external computer for neural control applications. Our implantable microsystem enables presently 16-channel broadband neural recording in a non-human primate brain by converting these signals to a digital stream of infrared light pulses for transmission through the skin. The implantable unit employs a flexible polymer substrate onto which we have integrated ultra-low power amplification with analog multiplexing, an analog-to-digital converter, a low power digital controller chip, and infrared telemetry. The scalable 16-channel microsystem can employ any of several modalities of power supply, including via radio frequency by induction, or infrared light via a photovoltaic converter. As of today, the implant has been tested as a sub-chronic unit in non-human primates (~ 1 month), yielding robust spike and broadband neural data on all available channels. PMID:19502132

Rapid growth of the US wildland-urban interface raises wildfire risk.

PubMed

Radeloff, Volker C; Helmers, David P; Kramer, H Anu; Mockrin, Miranda H; Alexandre, Patricia M; Bar-Massada, Avi; Butsic, Van; Hawbaker, Todd J; Martinuzzi, Sebastián; Syphard, Alexandra D; Stewart, Susan I

2018-03-27

The wildland-urban interface (WUI) is the area where houses and wildland vegetation meet or intermingle, and where wildfire problems are most pronounced. Here we report that the WUI in the United States grew rapidly from 1990 to 2010 in terms of both number of new houses (from 30.8 to 43.4 million; 41% growth) and land area (from 581,000 to 770,000 km 2 ; 33% growth), making it the fastest-growing land use type in the conterminous United States. The vast majority of new WUI areas were the result of new housing (97%), not related to an increase in wildland vegetation. Within the perimeter of recent wildfires (1990-2015), there were 286,000 houses in 2010, compared with 177,000 in 1990. Furthermore, WUI growth often results in more wildfire ignitions, putting more lives and houses at risk. Wildfire problems will not abate if recent housing growth trends continue.

Sampling and Control Circuit Board for an Inertial Measurement Unit

NASA Technical Reports Server (NTRS)

Chelmins, David; Powis, Rick

2012-01-01

Spacesuit navigation is one component of NASA s efforts to return humans to the Moon. Studies performed at the NASA Glenn Research Center (GRC) considered various navigation technologies and filtering approaches to enable navigation on the lunar surface. As part of this effort, microelectromechanical systems (MEMS) inertial measurement units (IMUs) were studied to determine if they could supplement a radiometric infrastructure. MEMS IMUs were included in the Lunar Extra-Vehicular Activity Crewmember Location Determination System (LECLDS) testbed during NASA s annual Desert Research and Technology Studies (D-RATS) event in 2009 and 2010. The testbed included one IMU in 2009 and three IMUs in 2010, along with a custom circuit board interfacing between the navigation processor and each IMU. The board was revised for the 2010 test, and this paper documents the design details of this latest revision of the interface circuit board and firmware.

Development of a front end controller/heap manager for PHENIX

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ericson, M.N.; Allen, M.D.; Musrock, M.S.

1996-12-31

A controller/heap manager has been designed for applicability to all detector subsystem types of PHENIX. the heap manager performs all functions associated with front end electronics control including ADC and analog memory control, data collection, command interpretation and execution, and data packet forming and communication. Interfaces to the unit consist of a timing and control bus, a serial bus, a parallel data bus, and a trigger interface. The topology developed is modular so that many functional blocks are identical for a number of subsystem types. Programmability is maximized through the use of flexible modular functions and implementation using field programmablemore » gate arrays (FPGAs). Details of unit design and functionality will be discussed with particular detail given to subsystems having analog memory-based front end electronics. In addition, mode control, serial functions, and FPGA implementation details will be presented.« less

A novel ultrasonic phased array inspection system to NDT for offshore platform structures

NASA Astrophysics Data System (ADS)

Wang, Hua; Shan, Baohua; Wang, Xin; Ou, Jinping

2007-01-01

A novel ultrasonic phased array detection system is developed for nondestructive testing (NDT). The purpose of the system is to make acquisition of data in real-time from 64-element ultrasonic phased array transducer, and to enable real- time processing of the acquired data. The system is composed of five main parts: master unit, main board, eight transmit/receive units, a 64-element transducer and an external PC. The system can be used with 64 element transducers, excite 32 elements, receive and sample echo signals form 32 elements simultaneously at 62.5MHz with 8 bit precision. The external PC is used as the user interface showing the real time images and controls overall operation of the system through USB serial link. The use of Universal Serial Bus (USB) improves the transform speed and reduces hardware interface complexity. The program of the system is written in Visual C++.NET and is platform independent.

Regenerative peripheral nerve interface viability and signal transduction with an implanted electrode.

PubMed

Kung, Theodore A; Langhals, Nicholas B; Martin, David C; Johnson, Philip J; Cederna, Paul S; Urbanchek, Melanie G

2014-06-01

The regenerative peripheral nerve interface is an internal interface for signal transduction with external electronics of prosthetic limbs; it consists of an electrode and a unit of free muscle that is neurotized by a transected residual peripheral nerve. Adding a conductive polymer coating on electrodes improves electrode conductivity. This study examines regenerative peripheral nerve interface tissue viability and signal fidelity in the presence of an implanted electrode coated or uncoated with a conductive polymer. In a rat model, the extensor digitorum longus muscle was moved as a nonvascularized free tissue transfer and neurotized by the divided peroneal nerve. Either a stainless steel pad electrode (n = 8) or a pad electrode coated with poly(3,4-ethylenedioxythiophene) conductive polymer (PEDOT) (n = 8) was implanted on the muscle transfer and secured with an encircling acellular extracellular matrix. The contralateral muscle served as the control. The free muscle transfers were successfully revascularized and over time reinnervated as evidenced by serial insertional needle electromyography. Compound muscle action potentials were successfully transduced through the regenerative peripheral nerve interface. The conductive polymer coating on the implanted electrode resulted in increased recorded signal amplitude that was observed throughout the course of the study. Histologic examination confirmed axonal sprouting, elongation, and synaptogenesis within regenerative peripheral nerve interface regardless of electrode type. The regenerative peripheral nerve interface remains viable over seven months in the presence of an implanted electrode. Electrodes with and without conductive polymer reliably transduced signals from the regenerative peripheral nerve interface. Electrodes with a conductive polymer coating resulted in recording more of the regenerative peripheral nerve interface signal.

Molecular Design of Branched and Binary Molecules at Ordered Interfaces

DOE Office of Scientific and Technical Information (OSTI.GOV)

Genson, Kirsten Larson

2005-01-01

This study examined five different branched molecular architectures to discern the effect of design on the ability of molecules to form ordered structures at interfaces. Photochromic monodendrons formed kinked packing structures at the air-water interface due to the cross-sectional area mismatch created by varying number of alkyl tails and the hydrophilic polar head group. The lower generations formed orthorhombic unit cell with long range ordering despite the alkyl tails tilted to a large degree. Favorable interactions between liquid crystalline terminal groups and the underlying substrate were observed to compel a flexible carbosilane dendrimer core to form a compressed elliptical conformationmore » which packed stagger within lamellae domains with limited short range ordering. A twelve arm binary star polymer was observed to form two dimensional micelles at the air-water interface attributed to the higher polystyrene block composition. Linear rod-coil molecules formed a multitude of packing structures at the air-water interface due to the varying composition. Tree-like rod-coil molecules demonstrated the ability to form one-dimensional structures at the air-water interface and at the air-solvent interface caused by the preferential ordering of the rigid rod cores. The role of molecular architecture and composition was examined and the influence chemically competing fragments was shown to exert on the packing structure. The amphiphilic balance of the different molecular series exhibited control on the ordering behavior at the air-water interface and within bulk structures. The shell nature and tail type was determined to dictate the preferential ordering structure and molecular reorganization at interfaces with the core nature effect secondary.« less

User perception and experience of the introduction of a novel critical care patient viewer in the ICU setting.

PubMed

Dziadzko, Mikhail A; Herasevich, Vitaly; Sen, Ayan; Pickering, Brian W; Knight, Ann-Marie A; Moreno Franco, Pablo

2016-04-01

Failure to rapidly identify high-value information due to inappropriate output may alter user acceptance and satisfaction. The information needs for different intensive care unit (ICU) providers are not the same. This can obstruct successful implementation of electronic medical record (EMR) systems. We evaluated the implementation experience and satisfaction of providers using a novel EMR interface-based on the information needs of ICU providers-in the context of an existing EMR system. This before-after study was performed in the ICU setting at two tertiary care hospitals from October 2013 through November 2014. Surveys were delivered to ICU providers before and after implementation of the novel EMR interface. Overall satisfaction and acceptance was reported for both interfaces. A total of 246 before (existing EMR) and 115 after (existing EMR+novel EMR interface) surveys were analyzed. 14% of respondents were prescribers and 86% were non-prescribers. Non-prescribers were more satisfied with the existing EMR, whereas prescribers were more satisfied with the novel EMR interface. Both groups reported easier data gathering, routine tasks & rounding, and fostering of team work with the novel EMR interface. This interface was the primary tool for 18% of respondents after implementation and 73% of respondents intended to use it further. Non-prescribers reported an intention to use this novel interface as their primary tool for information gathering. Compliance and acceptance of new system is not related to previous duration of work in ICU, but ameliorates with the length of EMR interface usage. Task-specific and role-specific considerations are necessary for design and successful implementation of a EMR interface. The difference in user workflows causes disparity of the way of EMR data usage. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Modeling of Cross-Plane Interface Thermal Conductance Between Graphene Nano-Ribbons (Postprint)

DTIC Science & Technology

2014-09-19

Mater. Interfaces 5 2599–603 [39] Hu M and Poulikakos D 2013 Int. J. Heat Mass Tranfer 62 205–13 [40] Plimpton S 1995 J. Comput. Phys. 117 1–19 [41...5c. PROGRAM ELEMENT NUMBER 61102F 6. AUTHOR( S ) (see back) 5d. PROJECT NUMBER 2305 5e. TASK NUMBER 5f. WORK UNIT NUMBER X091 7...PERFORMING ORGANIZATION NAME( S ) AND ADDRESS(ES) (see back) 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING / MONITORING AGENCY NAME( S ) AND

Chapter 3. Coordination and collaboration with interface units

PubMed Central

Joynt, Gavin M.; Loo, Shi; Taylor, Bruce L.; Margalit, Gila; Christian, Michael D.; Sandrock, Christian; Danis, Marion; Leoniv, Yuval

2016-01-01

Purpose To provide recommendations and standard operating procedures (SOPs) for intensive care unit (ICU) and hospital preparations for an influenza pandemic or mass disaster with a specific focus on enhancing coordination and collaboration between the ICU and other key stakeholders. Methods Based on a literature review and expert opinion, a Delphi process was used to define the essential topics including coordination and collaboration. Results Key recommendations include: (1) establish an Incident Management System with Emergency Executive Control Groups at facility, local, regional/state or national levels to exercise authority and direction over resource use and communications; (2) develop a system of communication, coordination and collaboration between the ICU and key interface departments within the hospital; (3) identify key functions or processes requiring coordination and collaboration, the most important of these being manpower and resources utilization (surge capacity) and re-allocation of personnel, equipment and physical space; (4) develop processes to allow smooth inter-departmental patient transfers; (5) creating systems and guidelines is not sufficient, it is important to: (a) identify the roles and responsibilities of key individuals necessary for the implementation of the guidelines; (b) ensure that these individuals are adequately trained and prepared to perform their roles; (c) ensure adequate equipment to allow key coordination and collaboration activities; (d) ensure an adequate physical environment to allow staff to properly implement guidelines; (6) trigger events for determining a crisis should be defined. Conclusions Judicious planning and adoption of protocols for coordination and collaboration with interface units are necessary to optimize outcomes during a pandemic. PMID:20213418

Wireless Avionics Packet to Support Fault Tolerance for Flight Applications

NASA Technical Reports Server (NTRS)

Block, Gary L.; Whitaker, William D.; Dillon, James W.; Lux, James P.; Ahmad, Mohammad

2009-01-01

In this protocol and packet format, data traffic is monitored by all network interfaces to determine the health of transmitter and subsystems. When failures are detected, the network inter face applies its recover y policies to provide continued service despite the presence of faults. The protocol, packet format, and inter face are independent of the data link technology used. The current demonstration system supports both commercial off-the-shelf wireless connections and wired Ethernet connections. Other technologies such as 1553 or serial data links can be used for the network backbone. The Wireless Avionics packet is divided into three parts: a header, a data payload, and a checksum. The header has the following components: magic number, version, quality of service, time to live, sending transceiver, function code, payload length, source Application Data Interface (ADI) address, destination ADI address, sending node address, target node address, and a sequence number. The magic number is used to identify WAV packets, and allows the packet format to be updated in the future. The quality of service field allows routing decisions to be made based on this value and can be used to route critical management data over a dedicated channel. The time to live value is used to discard misrouted packets while the source transceiver is updated at each hop. This information is used to monitor the health of each transceiver in the network. To identify the packet type, the function code is used. Besides having a regular data packet, the system supports diagnostic packets for fault detection and isolation. The payload length specifies the number of data bytes in the payload, and this supports variable-length packets in the network. The source ADI is the address of the originating interface. This can be used by the destination application to identify the originating source of the packet where the address consists of a subnet, subsystem class within the subnet, a subsystem unit, and the local ADI number. The destination ADI is used to route the packet to its ultimate destination. At each hop, the sending interface uses the destination address to determine the next node for the data. The sending node is the node address of the interface that is broadcasting the packet. This field is used to determine the health of the subsystem that is sending the packet. In the case of a packet that traverses several intermediate nodes, it may be the node address of the intermediate node. The target node is the node address of the next hop for the packet. It may be an intermediate node, or the final destination for the packet. The sequence number is used to identify duplicate packets. Because each interface has multiple transceivers, the same packet will appear at both receivers. The sequence number allows the interface to correlate the reception and forward a single, unique packet for additional processing. The subnet field allows data traffic to be partitioned into segregated local networks to support large networks while keeping each subnet at a manageable size. This also keeps the routing table small enough so routing can be done by a simple table lookup in an FPGA device. The subsystem class identifies members of a set of redundant subsystems, and, in a hot standby configuration, all members of the subsystem class will receive the data packets. Only the active subsystem will generate data traffic. Specific units in a class of redundant units can be identified and, if the hot standby configuration is not used, packets will be directed to a specific subsystem unit.

Brittle deformation during Alpine basal accretion and the origin of seismicity nests above the subduction interface

NASA Astrophysics Data System (ADS)

Menant, Armel; Angiboust, Samuel; Monié, Patrick; Oncken, Onno; Guigner, Jean-Michel

2018-04-01

Geophysical observations on active subduction zones have evidenced high seismicity clusters at 20-40 km depth in the fore-arc region whose origin remains controversial. We report here field observations of pervasive pseudotachylyte networks (interpreted as evidence for paleo-seismicity) in the now-exhumed Valpelline continental unit (Dent Blanche complex, NW. Alps, Italy), a tectonic sliver accreted to the upper plate at c. 30 km depth during the Paleocene Alpine subduction. Pre-alpine granulite-facies paragneiss from the core of the Valpelline unit are crosscut by widespread, mm to cm-thick pseudotachylyte veins. Co-seismic heating and subsequent cooling led to the formation of Ti-rich garnet rims, ilmenite needles, Ca-rich plagioclase, biotite microliths and hercynite micro-crystals. 39Ar-40Ar dating yields a 51-54 Ma age range for these veins, thus suggesting that frictional melting events occurred near peak burial conditions while the Valpelline unit was already inserted inside the duplex structure. In contrast, the base of the Valpelline unit underwent synchronous ductile and brittle, seismic deformation under water-bearing conditions followed by a re-equilibration at c. 40 Ma (39Ar-40Ar on retrograded pseudotachylyte veins) during exhumation-related deformation. Calculated rheological profiles suggest that pseudotachylyte veins from the dry core of the granulite unit record upper plate micro-seismicity (Mw 2-3) formed under very high differential stresses (>500 MPa) while the sheared base of the unit underwent repeated brittle-ductile deformation at much lower differential stresses (<40 MPa) in a fluid-saturated environment. These results demonstrate that some of the seismicity clusters nested along and above the plate interface may reflect the presence of stiff tectonic slivers rheologically analogous to the Valpelline unit acting as repeatedly breaking asperities in the basal accretion region of active subduction zones.

Simulation of Peptides at Aqueous Interfaces

NASA Technical Reports Server (NTRS)

Pohorille, Andrew; Wilson, M.; Chipot, C.; DeVincenzi, Donald L. (Technical Monitor)

2001-01-01

Behavior of peptides at water-membrane interfaces is of great interest in studies on cellular transport and signaling, membrane fusion, and the action of toxins and antibiotics. Many peptides, which exist in water only as random coils, can form sequence-dependent, ordered structures at aqueous interfaces, incorporate into membranes and self-assembly into functional units, such as simple ion channels. Multi -nanosecond molecular dynamics simulations have been carried out to study the mechanism and energetics of interfacial folding of both non-polar and amphiphilic peptides, their insertion into membranes and association into higher-order structures. The simulations indicate that peptides fold non-sequentially, often through a series of amphiphilic intermediates. They further incorporate into the membrane in a preferred direction as folded monomers, and only then aggregate into dimers and, possibly, further into "dimers of dimers".

A Report of Bethune-Cookman College NASA JOVE Projects

NASA Technical Reports Server (NTRS)

Agba, Lawrence C.; David, Sunil K.; Rao, Narsing G.; Rahmani, Munir A.

1997-01-01

This document is the final report for the Joint Venture (JOVE) in Space Sciences, and describes the tasks, performed with the support of the contract. These tasks include work in: (1) interfacing microprocessor systems to high performance parallel interface chips, SCSI drive and memory, needed for the implementation of a Space Optical Data Recorder; (2) designing a digital interface architecture for a microprocessor controlled sensors monitoring unit for a NASA Jitter Attenuation and Dynamics Experiment (JADE) project; (3) developing an enhanced back-propagation training algorithm; (4) studying the effect of simulated spaceflight on Aortic Contractility; (5) developing a course in astronomy; and (6) improving internet access by running cables, and installing hubs in various places on the campus; and (7) researching the characteristics of Nd:YALO laser resonator.

Charge transport and magnetization profile at the interface between the correlated metal CaRuO3 and the antiferromagnetic insulator CaMnO3

NASA Astrophysics Data System (ADS)

Freeland, J. W.; Chakhalian, J.; Boris, A. V.; Tonnerre, J.-M.; Kavich, J. J.; Yordanov, P.; Grenier, S.; Zschack, P.; Karapetrova, E.; Popovich, P.; Lee, H. N.; Keimer, B.

2010-03-01

A combination of spectroscopic probes was used to develop a detailed experimental description of the transport and magnetic properties of superlattices composed of the paramagnetic metal CaRuO3 and the antiferromagnetic insulator CaMnO3 . The charge-carrier density and Ru valence state in the superlattices are not significantly different from those of bulk CaRuO3 . The small charge transfer across the interface implied by these observations confirms predictions derived from density-functional calculations. However, a ferromagnetic polarization due to canted Mn spins penetrates 3-4 unit cells into CaMnO3 , far exceeding the corresponding predictions. The discrepancy may indicate the formation of magnetic polarons at the interface.

NASA's Man-Systems Integration Standards: A Human Factors Engineering Standard for Everyone in the Nineties

NASA Technical Reports Server (NTRS)

Booher, Cletis R.; Goldsberry, Betty S.

1994-01-01

During the second half of the 1980s, a document was created by the National Aeronautics and Space Administration (NASA) to aid in the application of good human factors engineering and human interface practices to the design and development of hardware and systems for use in all United States manned space flight programs. This comprehensive document, known as NASA-STD-3000, the Man-Systems Integration Standards (MSIS), attempts to address, from a human factors engineering/human interface standpoint, all of the various types of equipment with which manned space flight crew members must deal. Basically, all of the human interface situations addressed in the MSIS are present in terrestrially based systems also. The premise of this paper is that, starting with this already created standard, comprehensive documents addressing human factors engineering and human interface concerns could be developed to aid in the design of almost any type of equipment or system which humans interface with in any terrestrial environment. Utilizing the systems and processes currently in place in the MSIS Development Facility at the Johnson Space Center in Houston, TX, any number of MSIS volumes addressing the human factors / human interface needs of any terrestrially based (or, for that matter, airborne) system could be created.

Fluorescence light microscopy of pulmonary surfactant at the air-water interface of an air bubble of adjustable size.

PubMed Central

Knebel, D; Sieber, M; Reichelt, R; Galla, H-J; Amrein, M

2002-01-01

The structural dynamics of pulmonary surfactant was studied by epifluorescence light microscopy at the air-water interface of a bubble as a model close to nature for an alveolus. Small unilamellar vesicles of dipalmitoylphosphatidylcholine, dipalmitoylphosphatidylglycerol, a small amount of a fluorescent dipalmitoylphosphatidylcholine-analog, and surfactant-associated protein C were injected into the buffer solution. They aggregated to large clusters in the presence of Ca(2+) and adsorbed from these units to the interface. This gave rise to an interfacial film that eventually became fully condensed with dark, polygonal domains in a fluorescent matrix. When now the bubble size was increased or decreased, respectively, the film expanded or contracted. Upon expansion of the bubble, the dark areas became larger to the debit of the bright matrix and reversed upon contraction. We were able to observe single domains during the whole process. The film remained condensed, even when the interface was increased to twice its original size. From comparison with scanning force microscopy directly at the air-water interface, the fluorescent areas proved to be lipid bilayers associated with the (dark) monolayer. In the lung, such multilayer phase acts as a reservoir that guarantees a full molecular coverage of the alveolar interface during the breathing cycle and provides mechanical stability to the film. PMID:12080141

Measurement Error in Atomic-Scale Scanning Transmission Electron Microscopy-Energy-Dispersive X-Ray Spectroscopy (STEM-EDS) Mapping of a Model Oxide Interface.

PubMed

Spurgeon, Steven R; Du, Yingge; Chambers, Scott A

2017-06-01

With the development of affordable aberration correctors, analytical scanning transmission electron microscopy (STEM) studies of complex interfaces can now be conducted at high spatial resolution at laboratories worldwide. Energy-dispersive X-ray spectroscopy (EDS) in particular has grown in popularity, as it enables elemental mapping over a wide range of ionization energies. However, the interpretation of atomically resolved data is greatly complicated by beam-sample interactions that are often overlooked by novice users. Here we describe the practical factors-namely, sample thickness and the choice of ionization edge-that affect the quantification of a model perovskite oxide interface. Our measurements of the same sample, in regions of different thickness, indicate that interface profiles can vary by as much as 2-5 unit cells, depending on the spectral feature. This finding is supported by multislice simulations, which reveal that on-axis maps of even perfectly abrupt interfaces exhibit significant delocalization. Quantification of thicker samples is further complicated by channeling to heavier sites across the interface, as well as an increased signal background. We show that extreme care must be taken to prepare samples to minimize channeling effects and argue that it may not be possible to extract atomically resolved information from many chemical maps.

Interfacial coupling and polarization of perovskite ABO3 heterostructures

NASA Astrophysics Data System (ADS)

Wu, Lijun; Wang, Zhen; Zhang, Bangmin; Yu, Liping; Chow, G. M.; Tao, Jing; Han, Myung-Geun; Guo, Hangwen; Chen, Lina; Plummer, E. W.; Zhang, Jiandi; Zhu, Yimei

2017-02-01

Interfaces with subtle difference in atomic and electronic structures in perovskite ABO3 heterostructures often yield intriguingly different properties, yet their exact roles remain elusive. In this article, we report an integrated study of unusual transport, magnetic, and structural properties of Pr0.67Sr0.33MnO3 (PSMO) films and La0.67Sr0.33MnO3 (LSMO) films of various thicknesses on SrTiO3 (STO) substrate. In particular, using atomically resolved imaging and electron energy-loss spectroscopy (EELS), we measured interface related local lattice distortion, BO6 octahedral rotation and cation-anion displacement induced polarization. In the very thin PSMO film, an unexpected interface-induced ferromagnetic polaronic insulator phase was observed during the cubic-to-tetragonal phase transition of the substrate STO, due to the enhanced electron-phonon interaction and atomic disorder in the film. On the other hand, for the very thin LSMO films we observed a remarkably deep polarization in non-ferroelectric STO substrate near the interface. Combining the experimental results with first principles calculations, we propose that the observed deep polarization is induced by an electric field originating from oxygen vacancies that extend beyond a dozen unit-cells from the interface, thus providing important evidence of the role of defects in the emergent interface properties of transition metal oxides.

Low cost computer subsystem for the Solar Electric Propulsion Stage (SEPS)

NASA Technical Reports Server (NTRS)

1975-01-01

The Solar Electric Propulsion Stage (SEPS) subsystem which consists of the computer, custom input/output (I/O) unit, and tape recorder for mass storage of telemetry data was studied. Computer software and interface requirements were developed along with computer and I/O unit design parameters. Redundancy implementation was emphasized. Reliability analysis was performed for the complete command computer sybsystem. A SEPS fault tolerant memory breadboard was constructed and its operation demonstrated.

Processing and Applications of Depleted Uranium Alloy Products

DTIC Science & Technology

1976-09-01

temperal,,r at the wheel-metal interface, thus tending to produce surface cracks and in some cases to burn the metal. Data on speeds and feeds inr...comprehensive current resource of technical information on the development and utilization of advcnlod metal- or ceramic-base materials. The Center is operated...under the sponsorship of the Department of Defense. Neither the United Staxes Government nor any person acting on be ilf of the United States Government

Tactical Operations Analysis Support Facility.

DTIC Science & Technology

1981-05-01

Punch/Reader 2 DMC-11AR DDCMP Micro Processor 2 DMC-11DA Network Link Line Unit 2 DL-11E Async Serial Line Interface 4 Intel IN-1670 448K Words MOS Memory...86 5.3 VIRTUAL PROCESSORS - VAX-11/750 ........................... 89 5.4 A RELATIONAL DATA MANAGEMENT SYSTEM - ORACLE...Central Processing Unit (CPU) is a 16 bit processor for high-speed, real time applications, and for large multi-user, multi- task, time shared

Applied Meteorology Unit (AMU) Quarterly Report Fourth Quarter FY-04

NASA Technical Reports Server (NTRS)

Bauman, William; Wheeler, Mark; Lambert, Winifred; Case, Jonathan; Short, David

2004-01-01

This report summarizes the Applied Meteorology Unit (A MU) activities for the fourth quarter of Fiscal Year 2004 (July -Sept 2004). Tasks covered are: (1) Objective Lightning Probability Forecast: Phase I, (2) Severe Weather Forecast Decision Aid, (3) Hail Index, (4) Shuttle Ascent Camera Cloud Obstruction Forecast, (5) Advanced Regional Prediction System (ARPS) Optimization and Training Extension and (5) User Control Interface for ARPS Data Analysis System (ADAS) Data Ingest.

Hydrogeology, Water Quality, and Distribution and Sources of Salinity in the Floridan Aquifer System, Martin and St. Lucie Counties, Florida

USGS Publications Warehouse

Reese, Ronald S.

2004-01-01

The Floridan aquifer system is considered to be a valuable source for agricultural and municipal water supply in Martin and St. Lucie Counties, despite its brackish water. Increased withdrawals, however, could increase salinity and threaten the quality of withdrawn water. The Floridan aquifer system consists of limestone, dolomitic limestone, and dolomite and is divided into three hydrogeologic units: the Upper Floridan aquifer, a middle confining unit, and the Lower Floridan aquifer. An informal geologic unit at the top of the Upper Floridan aquifer, referred to as the basal Hawthorn/Suwannee unit, is bound above by a marker unit in the Hawthorn Group and at its base by the Ocala Limestone; a map of this unit shows an area where substantial eastward thickening begins near the coast. This change in thickness is used to divide the study area into inland and coastal areas. In the Upper Floridan aquifer, an area of elevated chloride concentration greater than 1,000 milligrams per liter and water temperature greater than 28 degrees Celsius exists in the inland area and trends northwest through north-central Martin County and western St. Lucie County. A structural feature coincides with this area of greater salinity and water temperature; this feature is marked by a previously mapped northwest-trending basement fault and, based on detailed mapping in this study of the structure at the top of the basal Hawthorn/Suwannee unit, an apparent southeast-trending trough. Higher hydraulic head also has been mapped in this northwest-trending area. Another area of high chloride concentration in the Upper Floridan aquifer occurs in the southern part of the coastal area (in eastern Martin County and northeastern Palm Beach County); chloride concentration in this area is more than 2,000 milligrams per liter and is as great as 8,000 milligrams per liter. A dissolved-solids concentration of less than 10,000 milligrams per liter defines the brackish-water zone in the Floridan aquifer system; the top and base of this zone are present at the top of the aquifer system and within the Lower Floridan aquifer, respectively. The base of the brackish-water zone, which can approximate a brackish-water/saltwater interface, was determined in 13 wells, mostly using resistivity geophysical logs. The depth to the saltwater interface was calculated using the Ghyben-Herzberg approximation and estimated predevelopment hydraulic heads in the Upper Floridan aquifer. In five of six inland area wells, the depth to the base of the brackish-water zone was substantially shallower than the estimated predevelopment interface (260 feet or greater), whereas in five of seven coastal area wells, the difference was not large (less than about 140 feet). Confining units in the inland area, such as dense dolomite, may prevent an interface from forming at its equilibrium position. Because of head decline, the calculated interface using recent (May 2001) water levels is as much as 640 ft above the base of the brackish water zone (in the northern part of the coastal area). Isotopic data collected during this study, including deuterium and oxygen-18 (18O/16O), the ratio of strontium-87 to strontium-86, and carbon-13 (13C/12C) and carbon-14, provide evidence for differences in the Floridan aquifer system ground-water geochemistry and its evolution between inland and coastal areas. Ground water from the inland area tends to be older than water from the coastal area, particularly where inland area water temperature is elevated. Isotopic data together with an anomalous vertical distribution of salinity in the coastal area indicate that the coastal area was invaded with seawater in relatively recent geologic time, and this water has not been completely flushed out by the modern-day flow system. Upward leakage from the Lower to Upper Floridan aquifer of high salinity water occurs through structural deformities, such as faults or fracture zones or associated dissolution features

Recent Advances in Neural Electrode-Tissue Interfaces.

PubMed

Woeppel, Kevin; Yang, Qianru; Cui, Xinyan Tracy

2017-12-01

Neurotechnology is facing an exponential growth in the recent decades. Neural electrode-tissue interface research has been well recognized as an instrumental component of neurotechnology development. While satisfactory long-term performance was demonstrated in some applications, such as cochlear implants and deep brain stimulators, more advanced neural electrode devices requiring higher resolution for single unit recording or microstimulation still face significant challenges in reliability and longevity. In this article, we review the most recent findings that contribute to our current understanding of the sources of poor reliability and longevity in neural recording or stimulation, including the material failure, biological tissue response and the interplay between the two. The newly developed characterization tools are introduced from electrophysiology models, molecular and biochemical analysis, material characterization to live imaging. The effective strategies that have been applied to improve the interface are also highlighted. Finally, we discuss the challenges and opportunities in improving the interface and achieving seamless integration between the implanted electrodes and neural tissue both anatomically and functionally.

High temperature interfacial superconductivity

DOEpatents

Bozovic, Ivan [Mount Sinai, NY; Logvenov, Gennady [Port Jefferson Station, NY; Gozar, Adrian Mihai [Port Jefferson, NY

2012-06-19

High-temperature superconductivity confined to nanometer-scale interfaces has been a long standing goal because of potential applications in electronic devices. The spontaneous formation of a superconducting interface in bilayers consisting of an insulator (La.sub.2CuO.sub.4) and a metal (La.sub.1-xSr.sub.xCuO.sub.4), neither of which is superconducting per se, is described. Depending upon the layering sequence of the bilayers, T.sub.c may be either .about.15 K or .about.30 K. This highly robust phenomenon is confined to within 2-3 nm around the interface. After exposing the bilayer to ozone, T.sub.c exceeds 50 K and this enhanced superconductivity is also shown to originate from a 1 to 2 unit cell thick interfacial layer. The results demonstrate that engineering artificial heterostructures provides a novel, unconventional way to fabricate stable, quasi two-dimensional high T.sub.c phases and to significantly enhance superconducting properties in other superconductors. The superconducting interface may be implemented, for example, in SIS tunnel junctions or a SuFET.

Structural differences between superconducting and non-superconducting CaCuO2/SrTiO3 interfaces

NASA Astrophysics Data System (ADS)

Zarotti, Francesca; Di Castro, Daniele; Felici, Roberto; Balestrino, Giuseppe

2018-06-01

A study of the interface structure of superconducting and non-superconducting CaCuO2/SrTiO3 heterostructures grown on NdGaO3(110) substrates is reported. Using the combination of high resolution x-ray reflectivity and surface diffraction, the crystallographic structure of superconducting and non-superconducting samples has been investigated. The analysis has demonstrated the excellent sharpness of the CaCuO2/SrTiO3 interface (roughness smaller than one perovskite unit cell). Furthermore, we were able to discriminate between the superconducting and the non-superconducting phase. In the former case, we found an increase of the spacing between the topmost Ca plane of CaCuO2 block and the first TiO2 plane of the overlaying STO block, relative to the non-superconducting case. These results are in agreement with the model that foresees a strong oxygen incorporation in the interface Ca plane in the superconducting heterostructures.

PC-based control unit for a head-mounted operating microscope for augmented-reality visualization in surgical navigation

NASA Astrophysics Data System (ADS)

Figl, Michael; Birkfellner, Wolfgang; Watzinger, Franz; Wanschitz, Felix; Hummel, Johann; Hanel, Rudolf A.; Ewers, Rolf; Bergmann, Helmar

2002-05-01

Two main concepts of Head Mounted Displays (HMD) for augmented reality (AR) visualization exist, the optical and video-see through type. Several research groups have pursued both approaches for utilizing HMDs for computer aided surgery. While the hardware requirements for a video see through HMD to achieve acceptable time delay and frame rate seem to be enormous the clinical acceptance of such a device is doubtful from a practical point of view. Starting from previous work in displaying additional computer-generated graphics in operating microscopes, we have adapted a miniature head mounted operating microscope for AR by integrating two very small computer displays. To calibrate the projection parameters of this so called Varioscope AR we have used Tsai's Algorithm for camera calibration. Connection to a surgical navigation system was performed by defining an open interface to the control unit of the Varioscope AR. The control unit consists of a standard PC with a dual head graphics adapter to render and display the desired augmentation of the scene. We connected this control unit to a computer aided surgery (CAS) system by the TCP/IP interface. In this paper we present the control unit for the HMD and its software design. We tested two different optical tracking systems, the Flashpoint (Image Guided Technologies, Boulder, CO), which provided about 10 frames per second, and the Polaris (Northern Digital, Ontario, Canada) which provided at least 30 frames per second, both with a time delay of one frame.

Optogalvanic spectroscopy of the C"5Pi ui-A' 5Sigma+g electronic system of N2.

PubMed

Pirali, O; Tokaryk, D W

2006-11-28

We have recorded spectra involving the 3-1, 4-2, 2-0, and 2-2 bands of the C" 5Pi(ui)-A' (5)Sigma+(g) electronic system of N(2) using optogalvanic detection in a discharge through a supersonic jet expansion of argon mixed with a trace of nitrogen gas. The spectra have an effective rotational temperature of about 45 K. They involve all five spin-orbit components of the C" 5Pi(ui) state, which has allowed for precise determination of the spin-orbit coupling in this state. Analysis of the C" 5Pi(ui) state Lambda-doubling shows that it is caused primarily by a first-order spin-spin effect rather than by interaction with Sigma(u) (+/-) states. Our results allow us to assign lines in the 4-2 and 2-0 bands observed in a fluorescence depletion experiment conducted over ten years ago [Ch. Ottinger and A. F. Vilesov, J. Chem. Phys. 103, 9929 (1995)], and to comment on the suggestion that perturbations to the C (3)Pi(u) v=1 level of N(2) arise from interactions with the C" 5Pi(ui) state.

[Research on electron density in DC needle-plate corona discharge at atmospheric pressure].

PubMed

Liu, Zhi-Qiang; Guo, Wei; Liu, Tao-Tao; Wu, Wen-Shuo; Liu, Shu-Min

2013-11-01

Using needle-plate discharge device, corona discharge experiment was done in the atmosphere. Through photo of spot size of light-emitting area, the relationship between the voltage and thickness of corona layer was discussed. When the distance between tip and plate is fixed, the thickness of corona layer increases with the increase in voltage; when the voltage is fixed, the thickness of corona layer decreases with the increase in the distance between tip and plate. As spectral intensity of N2 (C3pi(u)) (337.1 nm)reflects high energy electron density, it was measured with emission spectrometry. The results show that high energy electron density is the biggest near the needle tip and the relationship between high energy electron density and voltage is basically linear increasing. Fixing voltage, high energy electron density decreases with the increase in the distance between tip and plate. When the voltage and the distance between tip and plate are fixed, the high energy electron density increases with the decrease in the curvature radius of needle tip. These results are of great importance for the study of plasma parameters of corona discharge.

Problematic Internet use, well-being, self-esteem and self-control: Data from a high-school survey in China

PubMed Central

Mei, Songli; Yau, Yvonne H. C.; Chai, Jingxin; Guo, Jinhua; Potenza, Marc N.

2016-01-01

Given the prevalence of Internet use among youth, there is concern that a subset of Internet-using youth may exhibit problematic or addictive patterns of Internet use. The present study examines the association between problematic Internet use (PIU), demographic variables, and health-related measures among Chinese adolescents. Survey data from 1552 adolescents (male = 653, mean age = 15.43 years) from Jilin Province, China, were collected. According to the Young Diagnostic Questionnaire for Internet Addiction (YDQ), 77.8% (n=1,207), 16.8% (n=260), and 5.5% (n=85) showed adaptive, maladaptive, and problematic Internet use, respectively. Multinomial logistic regression analysis revealed that gender and family income per month differed between youth showing problematic and adaptive patterns of Internet use. Well-being, self-esteem, and self-control were related to severity of problematic Internet use, with greater severity typically associated with poorer measures in each domain. The findings that severity of problematic Internet use is associated with specific socio-demographic features and temperamental and well-being measures suggest that specific groups of youth may be particularly vulnerable to developing problematic Internet use. Early prevention/intervention programs targeting at-risk groups may help improve public health. PMID:27249805

Internet use among Turkish adolescents.

PubMed

Tahiroglu, Aysegul Yolga; Celik, Gonca G; Uzel, Mehtap; Ozcan, Neslihan; Avci, Ayse

2008-10-01

The aim of this study was to investigate Internet use habits and problematic Internet use (PIU) in Turkish adolescents. Participants were 3,975 undergraduate students, 7.6% of whom used the Internet for more than 12 hours weekly. The Online Cognition Scale (OCS) was used. The most common purpose for using the Internet was playing games, followed by general information search. Female users mostly preferred searching for general information; male users preferred playing games (p < 0.001, gamma = 995.205). The most preferred type of game was violent games. While preference for strategy and fantasy role-play (FRP) games increased with age, preference for other games decreased (p < 0.0001, gamma = 283.767). Participants who used the Internet mostly for general information searches and school-related searches had lower OCS scores (p < 0.0001). The highest OCS scores were related to violent games, followed by FRP, strategy, and sports and motor racing games. Computers and the Internet are useful, important inventions, but like other inventions, if used improperly, they may be harmful. Risk of harm raises concerns about who should use the Internet and computers, and where, when, and why the Internet and computers should be used.

Factors associated with Internet addiction: Cross-sectional study of Turkish adolescents.

PubMed

Seyrek, Sezen; Cop, Esra; Sinir, Hayati; Ugurlu, Mehmet; Şenel, Saliha

2017-02-01

The aim of this study was to investigate the prevalence of Internet addiction (IA), and the relationship between sociodemographic characteristics, depression, anxiety, attention-deficit-hyperactivity disorder (ADHD) symptoms and IA in adolescents. This was a cross-sectional school-based study with a representative sample of 468 students aged 12-17 years at the first trimester of the 2013-2014 academic year. The students were assessed using Young's Internet Addiction Scale, Children's Depression Inventory, Beck Anxiety Inventory, Conners' Parent Rating Scale, Conners' Teacher Rating Scale, Hollingshead-Redlich Scale, and the information form including characteristics of Internet use and socioeconomic status (SES). The relationship between these factors and Internet use was examined. Approximately 1.6% of students were identified as having IA, whereas 16.2% had possible IA. There were significant correlations between IA and depression, anxiety, attention disorder and hyperactivity symptoms in adolescents. Smoking was also related to IA. There was no significant relationship between IA and age, sex, body mass index, school type, and SES. Depression, anxiety, ADHD and smoking addiction are associated with PIU in adolescent students. Preventive public health policies targeting the psychological wellbeing of young people are needed. © 2016 Japan Pediatric Society.

A PDB-wide, evolution-based assessment of protein-protein interfaces.

PubMed

Baskaran, Kumaran; Duarte, Jose M; Biyani, Nikhil; Bliven, Spencer; Capitani, Guido

2014-10-18

Thanks to the growth in sequence and structure databases, more than 50 million sequences are now available in UniProt and 100,000 structures in the PDB. Rich information about protein-protein interfaces can be obtained by a comprehensive study of protein contacts in the PDB, their sequence conservation and geometric features. An automated computational pipeline was developed to run our Evolutionary Protein-Protein Interface Classifier (EPPIC) software on the entire PDB and store the results in a relational database, currently containing > 800,000 interfaces. This allows the analysis of interface data on a PDB-wide scale. Two large benchmark datasets of biological interfaces and crystal contacts, each containing about 3000 entries, were automatically generated based on criteria thought to be strong indicators of interface type. The BioMany set of biological interfaces includes NMR dimers solved as crystal structures and interfaces that are preserved across diverse crystal forms, as catalogued by the Protein Common Interface Database (ProtCID) from Xu and Dunbrack. The second dataset, XtalMany, is derived from interfaces that would lead to infinite assemblies and are therefore crystal contacts. BioMany and XtalMany were used to benchmark the EPPIC approach. The performance of EPPIC was also compared to classifications from the Protein Interfaces, Surfaces, and Assemblies (PISA) program on a PDB-wide scale, finding that the two approaches give the same call in about 88% of PDB interfaces. By comparing our safest predictions to the PDB author annotations, we provide a lower-bound estimate of the error rate of biological unit annotations in the PDB. Additionally, we developed a PyMOL plugin for direct download and easy visualization of EPPIC interfaces for any PDB entry. Both the datasets and the PyMOL plugin are available at http://www.eppic-web.org/ewui/\\#downloads. Our computational pipeline allows us to analyze protein-protein contacts and their sequence conservation across the entire PDB. Two new benchmark datasets are provided, which are over an order of magnitude larger than existing manually curated ones. These tools enable the comprehensive study of several aspects of protein-protein contacts in the PDB and represent a basis for future, even larger scale studies of protein-protein interactions.

Battery electric vehicles - implications for the driver interface.

PubMed

Neumann, Isabel; Krems, Josef F

2016-03-01

The current study examines the human-machine interface of a battery electric vehicle (BEV) from a user-perspective, focussing on the evaluation of BEV-specific displays, the relevance of provided information and challenges for drivers due to the concept of electricity in a road vehicle. A sample of 40 users drove a BEV for 6 months. Data were gathered at three points of data collection. Participants perceived the BEV-specific displays as only moderately reliable and helpful for estimating the displayed parameters. This was even less the case after driving the BEV for 3 months. A taxonomy of user requirements was compiled revealing the need for improved and additional information, especially regarding energy consumption and efficiency. Drivers had difficulty understanding electrical units and the energy consumption of the BEV. On the background of general principles for display design, results provide implications how to display relevant information and how to facilitate drivers' understanding of energy consumption in BEVs. Practitioner Summary: Battery electric vehicle (BEV) displays need to incorporate new information. A taxonomy of user requirements was compiled revealing the need for improved and additional information in the BEV interface. Furthermore, drivers had trouble understanding electrical units and energy consumption; therefore, appropriate assistance is required. Design principles which are specifically important in the BEV context are discussed.

Fiber optic sensing subsystem for temperature monitoring in space in-flight applications

NASA Astrophysics Data System (ADS)

Abad, S.; Araujo, F.; Pinto, F.; González Torres, J.; Rodriguez, R.; Moreno, M. A.

2017-11-01

Fiber Optic Sensor (FOS) technology presents long recognized advantages which enable to mitigate deficient performance of conventional technology in hazard-environments common in spacecraft monitoring applications, such as: multiplexing capability, immunity to EMI/RFI, remote monitoring, small size and weight, electrical insulation, intrinsically safe operation, high sensibility and long term reliability. A key advantage is also the potential reduction of Assembly Integration and Testing (AIT) time achieved by the multiplexing capability and associated reduced harness. In the frame of the ESA's ARTES5.2 and FLPP-Phase 3 programs, Airbus DS-Crisa and FiberSensing are developing a Fiber Bragg Grating (FBG) - based temperature monitoring system for application in space telecommunication platforms and launchers. The development encompasses both the interrogation unit and the FBG temperature sensors and associated fiber harness. In parallel Airbus DS - Crisa is developing a modular RTU (RTU2015) to provide maximum flexibility and mission-customization capability for RTUs maintaining the ESA's standards at I/O interface level [1]. In this context, the FBG interrogation unit is designed as a module to be compatible, in both physical dimensions and electrical interfaces aspects, with the Electrical Internal Interface Bus of the RTU2015, thus providing the capability for a hybrid electrical and optical monitoring system.

Failure analysis of glass-ceramic insulators of shock tested vacuum (neutron) tubes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spears, R.K.

1980-08-25

Eight investigative techniques were used to examine the glass-ceramic insulators in vacuum (neutron) tubes. The insulators were extracted from units that had been subjected to low temperature mechanical shock tests. Two of the three units showed reduced neutron output after these tests and an insulator on one of these two was cracked completely through which probably occurred during shock testing. The objective of this study was to determine if any major differences existed between the insulators of these tubes. After eight analyses, it was concluded that no appreciable differences existed. It appeared that cracking of the one glass-ceramic sample wasmore » initiated at inner-sleeve interface voids. For this sample, the interface void density was much higher than is presently acceptable. All insulators were made with glass-ceramic having a Na/sub 2/O content of 4.6 wt%. An increased Na/sub 2/O content will cause an increase in the coefficient of expansion and will reduce the residual stress level since the molybdenum has a higher coefficient of thermal expansion than the insulator. Thus, it is believed that a decrease in interface voids and an increase in Na/sub 2/O should aid in reduced cracking of the insulator during these tests.« less

TELICS—A Telescope Instrument Control System for Small/Medium Sized Astronomical Observatories

NASA Astrophysics Data System (ADS)

Srivastava, Mudit K.; Ramaprakash, A. N.; Burse, Mahesh P.; Chordia, Pravin A.; Chillal, Kalpesh S.; Mestry, Vilas B.; Das, Hillol K.; Kohok, Abhay A.

2009-10-01

For any modern astronomical observatory, it is essential to have an efficient interface between the telescope and its back-end instruments. However, for small and medium-sized observatories, this requirement is often limited by tight financial constraints. Therefore a simple yet versatile and low-cost control system is required for such observatories to minimize cost and effort. Here we report the development of a modern, multipurpose instrument control system TELICS (Telescope Instrument Control System) to integrate the controls of various instruments and devices mounted on the telescope. TELICS consists of an embedded hardware unit known as a common control unit (CCU) in combination with Linux-based data acquisition and user interface. The hardware of the CCU is built around the ATmega 128 microcontroller (Atmel Corp.) and is designed with a backplane, master-slave architecture. A Qt-based graphical user interface (GUI) has been developed and the back-end application software is based on C/C++. TELICS provides feedback mechanisms that give the operator good visibility and a quick-look display of the status and modes of instruments as well as data. TELICS has been used for regular science observations since 2008 March on the 2 m, f/10 IUCAA Telescope located at Girawali in Pune, India.

The research of laser marking control technology

NASA Astrophysics Data System (ADS)

Zhang, Qiue; Zhang, Rong

2009-08-01

In the area of Laser marking, the general control method is insert control card to computer's mother board, it can not support hot swap, it is difficult to assemble or it. Moreover, the one marking system must to equip one computer. In the system marking, the computer can not to do the other things except to transmit marking digital information. Otherwise it can affect marking precision. Based on traditional control methods existed some problems, introduced marking graphic editing and digital processing by the computer finish, high-speed digital signal processor (DSP) control marking the whole process. The laser marking controller is mainly contain DSP2812, digital memorizer, DAC (digital analog converting) transform unit circuit, USB interface control circuit, man-machine interface circuit, and other logic control circuit. Download the marking information which is processed by computer to U disk, DSP read the information by USB interface on time, then processing it, adopt the DSP inter timer control the marking time sequence, output the scanner control signal by D/A parts. Apply the technology can realize marking offline, thereby reduce the product cost, increase the product efficiency. The system have good effect in actual unit markings, the marking speed is more quickly than PCI control card to 20 percent. It has application value in practicality.

A well-posed numerical method to track isolated conformal map singularities in Hele-Shaw flow

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baker, G.; Siegel, M.; Tanveer, S.

1995-09-01

We present a new numerical method for calculating an evolving 2D Hele-Shaw interface when surface tension effects are neglected. In the case where the flow is directed from the less viscous fluid into the more viscous fluid, the motion of the interface is ill-posed; small deviations in the initial condition will produce significant changes in the ensuing motion. The situation is disastrous for numerical computation, as small roundoff errors can quickly lead to large inaccuracies in the computed solution. Our method of computation is most easily formulated using a conformal map from the fluid domain into a unit disk. Themore » method relies on analytically continuing the initial data and equations of motion into the region exterior to the disk, where the evolution problem becomes well-posed. The equations are then numerically solved in the extended domain. The presence of singularities in the conformal map outside of the disk introduces specific structures along the fluid interface. Our method can explicitly track the location of isolated pole and branch point singularities, allowing us to draw connections between the development of interfacial patterns and the motion of singularities as they approach the unit disk. In particular, we are able to relate physical features such as finger shape, side-branch formation, and competition between fingers to the nature and location of the singularities. The usefulness of this method in studying the formation of topological singularities (self-intersections of the interface) is also pointed out. 47 refs., 10 figs., 1 tab.« less

Effects of Repeated Screw Tightening on Implant Abutment Interfaces in Terms of Bacterial and Yeast Leakage in Vitro: One-Time Abutment Versus the Multiscrewing Technique.

PubMed

Calcaterra, Roberta; Di Girolamo, Michele; Mirisola, Concetta; Baggi, Luigi

2016-01-01

Screw loosening can damage the interfaces of implant components, resulting in susceptibility to contamination of the internal parts by microorganisms. The aim of this study was to investigate the impact of abutment screw retightening on the leakage of two different types of bacteria, Streptococcus sanguinis and Fusobacterium nucleatum, and of the yeast Candida albicans. Two types of implant-abutment systems with tube-in-tube interfaces were tested. Groups A and B each used a different type of system that consisted of 20 different pieces that were assembled according to the manufacturer's torque recommendations; four samples in each group were closed just one time, four samples three times, four samples five times, four samples seven times, and four samples nine times. The implants of groups A and B were contaminated with 0.1 μL of microbial solution just before being assembled for the last time to minimize the possibility of contamination. Results showed a direct correlation between the number of colony-forming units grown in the plates and the closing/opening cycles of the implant-abutment systems. Within the limitations of this study, the results indicate the possibility that repeated closing/opening cycles of the implant-abutment unit may influence bacterial/yeast leakage, most likely as a consequence of decreased precision of the coupling between the abutment and the internal part of the dental implant. These findings suggest that a one-time abutment technique may avoid microbiologic leakage in cases of implant-abutment systems with tube-in-tube interfaces.

Dose in bone and tissue near bone-tissue interface from electron beam.

PubMed

Shiu, A S; Hogstrom, K R

1991-08-01

This work has quantitatively studied the variation of dose both within bone and in unit density tissue near bone-tissue interfaces. Dose upstream of a bone-tissue interface is increased because of an increase in the backscattered electrons from the bone. The magnitude of this effect was measured using a thin parallel-plate ionization chamber upstream of a polymethyl methacrylate (PMMA)-hard bone interface. The electron backscatter factor (EBF) increased rapidly with bone thickness until a full EBF was achieved. This occurred at approximately 3.5 mm at 2 MeV and 6 mm at 13.1 MeV. The full EBF at the interface ranged from approximately 1.018 at 13.1 MeV to 1.05 at 2 MeV. It was also observed that the EBF had a dependence on the energy spectrum at the interface. The penetration of the backscattered electrons in the upstream direction of PMMA was also measured. The dose penetration fell off rapidly in the upstream direction of the interface. Dose enhancement to unit density tissue in bone was measured for an electron beam by placing thermoluminescent dosimeters (TLDs) in a PMMA-bone-PMMA phantom. The maximum dose enhancement in bone was approximately 7% of the maximum dose in water. However, the pencil-beam algorithm of Hogstrom et al. predicted an increase of only 1%, primarily owing to the inverse-square correction. Film was also used to measure the dose enhancement in bone. The film plane was aligned either perpendicular or parallel to the central axis of the beam. The film data indicated that the maximum dose enhancement in bone was approximately 8% for the former film alignment (which was similarly predicted by the TLD measurements) and 13% for the latter film alignment. These results confirm that the X ray film is not suitable to be irritated "edge on" in an inhomogeneous phantom without making perturbation corrections resulting from the film acting as a long narrow inhomogeneous cavity within the bone. In addition, the results give the radiotherapist a basis for clinical judgment when electron beams are used to treat lesions behind bone or near bony structures. We feel these data enhance the ability to recognize the shortcomings of the current dose calculation algorithm used clinically.

The Integrated Mode Management Interface

NASA Technical Reports Server (NTRS)

Hutchins, Edwin

1996-01-01

Mode management is the processes of understanding the character and consequences of autoflight modes, planning and selecting the engagement, disengagement and transitions between modes, and anticipating automatic mode transitions made by the autoflight system itself. The state of the art is represented by the latest designs produced by each of the major airframe manufacturers, the Boeing 747-400, the Boeing 777, the McDonnell Douglas MD-11, and the Airbus A320/A340 family of airplanes. In these airplanes autoflight modes are selected by manipulating switches on the control panel. The state of the autoflight system is displayed on the flight mode annunciators. The integrated mode management interface (IMMI) is a graphical interface to autoflight mode management systems for aircraft equipped with flight management computer systems (FMCS). The interface consists of a vertical mode manager and a lateral mode manager. Autoflight modes are depicted by icons on a graphical display. Mode selection is accomplished by touching (or mousing) the appropriate icon. The IMMI provides flight crews with an integrated interface to autoflight systems for aircraft equipped with flight management computer systems (FMCS). The current version is modeled on the Boeing glass-cockpit airplanes (747-400, 757/767). It runs on the SGI Indigo workstation. A working prototype of this graphics-based crew interface to the autoflight mode management tasks of glass cockpit airplanes has been installed in the Advanced Concepts Flight Simulator of the CSSRF of NASA Ames Research Center. This IMMI replaces the devices in FMCS equipped airplanes currently known as mode control panel (Boeing), flight guidance control panel (McDonnell Douglas), and flight control unit (Airbus). It also augments the functions of the flight mode annunciators. All glass cockpit airplanes are sufficiently similar that the IMMI could be tailored to the mode management system of any modern cockpit. The IMMI does not replace the functions of the FMCS control and display unit. The purpose of the INMI is to provide flight crews with a shared medium in which they can assess the state of the autoflight system, take control actions on it, reason about its behavior, and communicate with each other about its behavior. The design is intended to increase mode awareness and provide a better interface to autoflight mode management. This report describes the IMMI, the methods that were used in designing and developing it, and the theory underlying the design and development processes.

The NASA bus communications listening device software

NASA Technical Reports Server (NTRS)

Allen, M. A.

1979-01-01

The development of the bus listener is presented. Special software was developed to control the 'bus interface units' (BIU) connecting each of these devices to a communications cable to form the bus communication network. The code used in the BTU is described.

Viking lander camera radiometry calibration report, volume 2

NASA Technical Reports Server (NTRS)

Wolf, M. R.; Atwood, D. L.; Morrill, M. E.

1977-01-01

The requirements the performance validation, and interfaces for the RADCAM program, to convert Viking lander camera image data to radiometric units were established. A proposed algorithm is described, and an appendix summarizing the planned reduction of camera test data was included.

Model-Driven Energy Intelligence

DTIC Science & Technology

2015-03-01

building information model ( BIM ) for operations...estimate of the potential impact on energy performance at Fort Jackson. 15. SUBJECT TERMS Building Information Modeling ( BIM ), Energy, ECMs, monitoring...dimensional AHU Air Handling Unit API Application Programming Interface BIM building information model BLCC Building Life Cycle Cost

A software package for interactive motor unit potential classification using fuzzy k-NN classifier.

PubMed

Rasheed, Sarbast; Stashuk, Daniel; Kamel, Mohamed

2008-01-01

We present an interactive software package for implementing the supervised classification task during electromyographic (EMG) signal decomposition process using a fuzzy k-NN classifier and utilizing the MATLAB high-level programming language and its interactive environment. The method employs an assertion-based classification that takes into account a combination of motor unit potential (MUP) shapes and two modes of use of motor unit firing pattern information: the passive and the active modes. The developed package consists of several graphical user interfaces used to detect individual MUP waveforms from a raw EMG signal, extract relevant features, and classify the MUPs into motor unit potential trains (MUPTs) using assertion-based classifiers.

Tailoring the Two Dimensional Electron Gas at Polar ABO3/SrTiO3 Interfaces for Oxide Electronics.

PubMed

Li, Changjian; Liu, Zhiqi; Lü, Weiming; Wang, Xiao Renshaw; Annadi, Anil; Huang, Zhen; Zeng, Shengwei; Ariando; Venkatesan, T

2015-08-26

The 2D electron gas at the polar/non-polar oxide interface has become an important platform for several novel oxide electronic devices. In this paper, the transport properties of a wide range of polar perovskite oxide ABO3/SrTiO3 (STO) interfaces, where ABO3 includes LaAlO3, PrAlO3, NdAlO3, NdGaO3 and LaGaO3 in both crystalline and amorphous forms, were investigated. A robust 4 unit cell (uc) critical thickness for metal insulator transition was observed for crystalline polar layer/STO interface while the critical thickness for amorphous ones was strongly dependent on the B site atom and its oxygen affinity. For the crystalline interfaces, a sharp transition to the metallic state (i.e. polarization catastrophe induced 2D electron gas only) occurs at a growth temperature of 515 °C which corresponds to a critical relative crystallinity of ~70 ± 10% of the LaAlO3 overlayer. This temperature is generally lower than the metal silicide formation temperature and thus offers a route to integrate oxide heterojunction based devices on silicon.

Acoustic emission as a screening tool for ceramic matrix composites

NASA Astrophysics Data System (ADS)

Ojard, Greg; Goberman, Dan; Holowczak, John

2017-02-01

Ceramic matrix composites are composite materials with ceramic fibers in a high temperature matrix of ceramic or glass-ceramic. This emerging class of materials is viewed as enabling for efficiency improvements in many energy conversion systems. The key controlling property of ceramic matrix composites is a relatively weak interface between the matrix and the fiber that aids crack deflection and fiber pullout resulting in greatly increased toughness over monolithic ceramics. United Technologies Research Center has been investigating glass-ceramic composite systems as a tool to understand processing effects on material performance related to the performance of the weak interface. Changes in the interface have been shown to affect the mechanical performance observed in flexural testing and subsequent microstructural investigations have confirmed the performance (or lack thereof) of the interface coating. Recently, the addition of acoustic emission testing during flexural testing has aided the understanding of the characteristics of the interface and its performance. The acoustic emission onset stress changes with strength and toughness and this could be a quality tool in screening the material before further development and use. The results of testing and analysis will be shown and additional material from other ceramic matrix composite systems may be included to show trends.

Transmission control unit drive based on the AUTOSAR standard

NASA Astrophysics Data System (ADS)

Guo, Xiucai; Qin, Zhen

2018-03-01

It is a trend of automotive electronics industry in the future that automotive electronics embedded system development based on the AUTOSAR standard. AUTOSAR automotive architecture standard has proposed the transmission control unit (TCU) development architecture and designed its interfaces and configurations in detail. This essay has discussed that how to drive the TCU based on AUTOSAR standard architecture. The results show that driving the TCU with the AUTOSAR system improves reliability and shortens development cycles.

DOE Project 353: TAMS Prototype and production coupling alignment units

DOE Office of Scientific and Technical Information (OSTI.GOV)

Field, K.V.

1996-02-01

TAMS is an electronic measurement system used to determine the alignment of turbine-generator shafts at the coupling interface. The displacement transducer is a strain gage based sensor mounted in a portable probe. The measurement system was experiencing zero input drift and temperature induced drift. This project endeavored to determine the source of these problems and to revise a unit to be returned to a customer, Baltimore Gas and Electric (BGE), within a period of five weeks.

Extraordinary Photocurrent Harvesting at Type-II HeterojunctionInterfaces: Toward High Detectivity Carbon Nanotube Infrared Detectors

DTIC Science & Technology

2012-11-06

Kirkeminde,‡ Shenqiang Ren,‡ and Judy Wu*,† †Department of Physics and Astronomy , University of Kansas, Lawrence, Kansas 66045, United States ‡Department of...Published in Nano Letters , Vol. Ed. 0 12, (11) (2012), ( (11). DoD Components reserve a royalty-free, nonexclusive and irrevocable right to reproduce... Chemistry , University of Kansas, Lawrence, Kansas 66045, United States *S Supporting Information ABSTRACT: Despite the potentials and the efforts put in

Breaking a virus: Identifying molecular level failure modes of a viral capsid by multiscale modeling

NASA Astrophysics Data System (ADS)

Krishnamani, V.; Globisch, C.; Peter, C.; Deserno, M.

2016-10-01

We use coarse-grained (CG) simulations to study the deformation of empty Cowpea Chlorotic Mottle Virus (CCMV) capsids under uniaxial compression, from the initial elastic response up to capsid breakage. Our CG model is based on the MARTINI force field and has been amended by a stabilizing elastic network, acting only within individual proteins, that was tuned to capture the fluctuation spectrum of capsid protein dimers, obtained from all atom simulations. We have previously shown that this model predicts force-compression curves that match AFM indentation experiments on empty CCMV capsids. Here we investigate details of the actual breaking events when the CCMV capsid finally fails. We present a symmetry classification of all relevant protein contacts and show that they differ significantly in terms of stability. Specifically, we show that interfaces which break readily are precisely those which are believed to form last during assembly, even though some of them might share the same contacts as other non-breaking interfaces. In particular, the interfaces that form pentamers of dimers never break, while the virtually identical interfaces within hexamers of dimers readily do. Since these units differ in the large-scale geometry and, most noticeably, the cone-angle at the center of the 5- or 6-fold vertex, we propose that the hexameric unit fails because it is pre-stressed. This not only suggests that hexamers of dimers form less frequently during the early stages of assembly; it also offers a natural explanation for the well-known β-barrel motif at the hexameric center as a post-aggregation stabilization mechanism. Finally, we identify those amino acid contacts within all key protein interfaces that are most persistent during compressive deformation of the capsid, thereby providing potential targets for mutation studies aiming to elucidate the key contacts upon which overall stability rests.

A Multi-Purpose Modular Electronics Integration Node for Exploration Extravehicular Activity

NASA Technical Reports Server (NTRS)

Hodgson, Edward; Papale, William; Wichowski, Robert; Rosenbush, David; Hawes, Kevin; Stankiewicz, Tom

2013-01-01

As NASA works to develop an effective integrated portable life support system design for exploration Extravehicular activity (EVA), alternatives to the current system s electrical power and control architecture are needed to support new requirements for flexibility, maintainability, reliability, and reduced mass and volume. Experience with the current Extravehicular Mobility Unit (EMU) has demonstrated that the current architecture, based in a central power supply, monitoring and control unit, with dedicated analog wiring harness connections to active components in the system has a significant impact on system packaging and seriously constrains design flexibility in adapting to component obsolescence and changing system needs over time. An alternative architecture based in the use of a digital data bus offers possible wiring harness and system power savings, but risks significant penalties in component complexity and cost. A hybrid architecture that relies on a set of electronic and power interface nodes serving functional models within the Portable Life Support System (PLSS) is proposed to minimize both packaging and component level penalties. A common interface node hardware design can further reduce penalties by reducing the nonrecurring development costs, making miniaturization more practical, maximizing opportunities for maturation and reliability growth, providing enhanced fault tolerance, and providing stable design interfaces for system components and a central control. Adaptation to varying specific module requirements can be achieved with modest changes in firmware code within the module. A preliminary design effort has developed a common set of hardware interface requirements and functional capabilities for such a node based on anticipated modules comprising an exploration PLSS, and a prototype node has been designed assembled, programmed, and tested. One instance of such a node has been adapted to support testing the swingbed carbon dioxide and humidity control element in NASA s advanced PLSS 2.0 test article. This paper will describe the common interface node design concept, results of the prototype development and test effort, and plans for use in NASA PLSS 2.0 integrated tests.

Application of Field System-FS9 and a PC to Antenna Control Unit interface in Radio Astronomy in Peru

NASA Astrophysics Data System (ADS)

Vidal, E. V. S.; Ishitsuka, J. I. I.; Koyama, K. Y.

2006-08-01

We are in the process to transform a 32m antenna in Peru, used for telecommunications, into a Radio Telescope to perform Radio Astronomy in Peru. The 32m antenna of Peru constructed by NEC was used for telecommunications with communications satellites at 6 GHz for transmission, and 4 GHz for reception. In collaboration of National Institute of Information and Communications Technology (NICT) Japan, and National Observatory of Japan we developed an Antenna Control System for the 32m antenna in Peru. It is based on the Field System FS9, software released by NASA for VLBI station, and an interface to link PC within FS9 software (PC-FS9) and Antenna Control Unit (ACU) of the 32 meters antenna. The PC-FS9 controls the antenna, commands are translated by interface into control signals compatibles with the ACU using: an I/O digital card with two 20bits ports to read azimuth and elevation angles, one 16bits port for reading status of ACU, one 24bits port to send pulses to start or stop operations of antenna, two channels are analogic outputs to drive the azimuth and elevation motors of the antenna, a LCD display to show the status of interface and error messages, and one serial port for communications with PC-FS9,. The first experiment of the control system was made with 11m parabolic antenna of Kashima Space Research Center (NICT), where we tested the right working of the routines implemented for de FS9 software, and simulations was made with looped data between output and input of the interface, both test were done successfully. With this scientific instrument we will be able to contribute with researching of astrophysics. We expect to into a near future to work at 6.7GHz to study Methanol masers, and higher frequencies with some improvements of the surface of the dish.

Implementation of High Speed Distributed Data Acquisition System

NASA Astrophysics Data System (ADS)

Raju, Anju P.; Sekhar, Ambika

2012-09-01

This paper introduces a high speed distributed data acquisition system based on a field programmable gate array (FPGA). The aim is to develop a "distributed" data acquisition interface. The development of instruments such as personal computers and engineering workstations based on "standard" platforms is the motivation behind this effort. Using standard platforms as the controlling unit allows independence in hardware from a particular vendor and hardware platform. The distributed approach also has advantages from a functional point of view: acquisition resources become available to multiple instruments; the acquisition front-end can be physically remote from the rest of the instrument. High speed data acquisition system transmits data faster to a remote computer system through Ethernet interface. The data is acquired through 16 analog input channels. The input data commands are multiplexed and digitized and then the data is stored in 1K buffer for each input channel. The main control unit in this design is the 16 bit processor implemented in the FPGA. This 16 bit processor is used to set up and initialize the data source and the Ethernet controller, as well as control the flow of data from the memory element to the NIC. Using this processor we can initialize and control the different configuration registers in the Ethernet controller in a easy manner. Then these data packets are sending to the remote PC through the Ethernet interface. The main advantages of the using FPGA as standard platform are its flexibility, low power consumption, short design duration, fast time to market, programmability and high density. The main advantages of using Ethernet controller AX88796 over others are its non PCI interface, the presence of embedded SRAM where transmit and reception buffers are located and high-performance SRAM-like interface. The paper introduces the implementation of the distributed data acquisition using FPGA by VHDL. The main advantages of this system are high accuracy, high speed, real time monitoring.

Emergent Interfacial Ferromagnetism in CaMnO3-based Superlattices

NASA Astrophysics Data System (ADS)

Grutter, Alexander

2014-03-01

Interfaces of complex oxide materials provide a rich playground not only for the exploration of properties not found in the bulk constituents but also for the development of functional interfaces to be incorporated in spintronic applications. Emergent interfacial magnetic phenomena have been of great interest but surprisingly there have been few examples of emergent interfacial ferromagnetism. In this talk, I will describe our recent work on the stabilization of ferromagnetism in CaMnO3-based superlattices. We have demonstrated ferromagnetism at the interface between the antiferromagnetic insulator CaMnO3 and a paramagnetic metallic layer, including CaRuO3 and LaNiO3. Theoretically the ferromagnetism has been attributed to an interfacial double exchange interaction among the interfacial Mn ions that is mediated by itinerant electrons from the paramagnetic metallic layer. Through polarized neutron reflectivity and observation of exchange bias, we have demonstrated that the ferromagnetism comes from Mn ions in a single unit cell at the interfaces just as theory has predicted. We have also demonstrated that the metallicity of the paramagnetic layer is critical in stabilizing ferromagnetism at the interface and that the interfacial ferromagnetism can be suppressed by suppressing the metallicity of the paramagnetic layer. Despite the agreement with theory, there remain open questions as to the magnetic interactions among the interfacial ferromagnetic layers. For example, the saturated magnetic moment modulates as a function of the thickness of both the CaMnO3 and paramagnetic metal layers. The origins of this oscillation are not well understood and may stem from either structural effects or long-range oscillatory magnetic coupling interactions reminiscent of RKKY interactions. Evidence of the doubling of the unit cell and long range antiferromagnetic correlations support these speculations. This work was supported by the U.S. Department of Energy, Office of Science, Division of Materials Sciences and Engineering, under Contract # DE-AC05-76RL01830 and DE-SC0008505.

High- T c superconductivity at the interface between the CaCuO 2 and SrTiO 3 insulating oxides

DOE Office of Scientific and Technical Information (OSTI.GOV)

Di Castro, D.; Cantoni, C.; Ridolfi, F.

2015-09-28

At interfaces between complex oxides it is possible to generate electronic systems with unusual electronic properties, which are not present in the isolated oxides. One important example is the appearance of superconductivity at the interface between insulating oxides, although, until now, with very low T c. We report the occurrence of high T c superconductivity in the bilayer CaCuO 2/SrTiO 3, where both the constituent oxides are insulating. In order to obtain a superconducting state, the CaCuO 2/SrTiO 3 interface must be realized between the Ca plane of CaCuO 2 and the TiO 2 plane of SrTiO 3. Only inmore » this case can oxygen ions be incorporated in the interface Ca plane, acting as apical oxygen for Cu and providing holes to the CuO 2 planes. In addition, a detailed hole doping spatial profile can be obtained by scanning transmission electron microscopy and electron-energy-loss spectroscopy at the O K edge, clearly showing that the (super)conductivity is confined to about 1–2 CaCuO 2 unit cells close to the interface with SrTiO 3. The results obtained for the CaCuO 2/SrTiO 3 interface can be extended to multilayered high T c cuprates, contributing to explaining the dependence of T c on the number of CuO 2 planes in these systems.« less

On stoichiometry and intermixing at the spinel/perovskite interface in CoFe2O4/BaTiO3 thin films.

PubMed

Tileli, Vasiliki; Duchamp, Martial; Axelsson, Anna-Karin; Valant, Matjaz; Dunin-Borkowski, Rafal E; Alford, Neil McN

2015-01-07

The performance of complex oxide heterostructures depends primarily on the interfacial coupling of the two component structures. This interface character inherently varies with the synthesis method and conditions used since even small composition variations can alter the electronic, ferroelectric, or magnetic functional properties of the system. The focus of this article is placed on the interface character of a pulsed laser deposited CoFe2O4/BaTiO3 thin film. Using a range of state-of-the-art transmission electron microscopy methodologies, the roles of substrate morphology, interface stoichiometry, and cation intermixing are determined on the atomic level. The results reveal a surprisingly uneven BaTiO3 substrate surface formed after the film deposition and Fe atom incorporation in the top few monolayers inside the unit cell of the BaTiO3 crystal. Towards the CoFe2O4 side, a disordered region extending several nanometers from the interface was revealed and both Ba and Ti from the substrate were found to diffuse into the spinel layer. The analysis also shows that within this somehow incompatible composite interface, a different phase is formed corresponding to the compound Ba2Fe3Ti5O15, which belongs to the ilmenite crystal structure of FeTiO3 type. The results suggest a chemical activity between these two oxides, which could lead to the synthesis of complex engineered interfaces.

Highly parallel reconfigurable computer architecture for robotic computation having plural processor cells each having right and left ensembles of plural processors

NASA Technical Reports Server (NTRS)

Fijany, Amir (Inventor); Bejczy, Antal K. (Inventor)

1994-01-01

In a computer having a large number of single-instruction multiple data (SIMD) processors, each of the SIMD processors has two sets of three individual processor elements controlled by a master control unit and interconnected among a plurality of register file units where data is stored. The register files input and output data in synchronism with a minor cycle clock under control of two slave control units controlling the register file units connected to respective ones of the two sets of processor elements. Depending upon which ones of the register file units are enabled to store or transmit data during a particular minor clock cycle, the processor elements within an SIMD processor are connected in rings or in pipeline arrays, and may exchange data with the internal bus or with neighboring SIMD processors through interface units controlled by respective ones of the two slave control units.

Gamma ray irradiated silicon nanowires: An effective model to investigate defects at the interface of Si/SiOx

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yin, Kui; Zhao, Yi; Liu, Liangbin

2014-01-20

The effect of gamma ray irradiation on silicon nanowires was investigated. Here, an additional defect emerged in the gamma-ray-irradiated silicon nanowires and was confirmed with electron spin resonance spectra. {sup 29}Si nuclear magnetic resonance spectroscopy showed that irradiation doses had influence on the Q{sup 4} unit structure. This phenomenon indicated that the unique core/shell structure of silicon nanowires might contribute to induce metastable defects under gamma ray irradiation, which served as a satisfactory model to investigate defects at the interface of Si/SiOx.

Copyright Ownership in a Networked Multimedia Environment

NASA Technical Reports Server (NTRS)

Williams, Vernon E.

1994-01-01

The explosion of computer communications in the United States has spurred the development of many new technologies. One of these new technologies is Mosaic and the World-Wide Web. Mosaic is a user interface that uses the internet as a backbone for communications. The Mosaic interface enables a user to manipulate text, images and graphics produced by different authors. The flexibility that Mosaic offers raises significant copyright issues. This paper attempts to analyze these issues using current copyright law as a framework. The author then goes on to offer a different analysis that may result from future developments in copyright law.

Arkansas Groundwater-Quality Network

USGS Publications Warehouse

Pugh, Aaron L.; Jackson, Barry T.; Miller, Roger

2014-01-01

Arkansas is the fourth largest user of groundwater in the United States, where groundwater accounts for two-thirds of the total water use. Groundwater use in the State increased by 510 percent between 1965 and 2005 (Holland, 2007). The Arkansas Groundwater-Quality Network is a Web map interface (http://ar.water.usgs.gov/wqx) that provides rapid access to the U.S. Geological Survey’s (USGS) National Water Information System (NWIS) and the U.S. Environmental Protection Agency’s (USEPA) STOrage and RETrieval (STORET) databases of ambient water information. The interface enables users to perform simple graphical analysis and download selected water-quality data.

Open Technology Approaches to Geospatial Interface Design

NASA Astrophysics Data System (ADS)

Crevensten, B.; Simmons, D.; Alaska Satellite Facility

2011-12-01

What problems do you not want your software developers to be solving? Choosing open technologies across the entire stack of software development-from low-level shared libraries to high-level user interaction implementations-is a way to help ensure that customized software yields innovative and valuable tools for Earth Scientists. This demonstration will review developments in web application technologies and the recurring patterns of interaction design regarding exploration and discovery of geospatial data through the Vertex: ASF's Dataportal interface, a project utilizing current open web application standards and technologies including HTML5, jQueryUI, Backbone.js and the Jasmine unit testing framework.

A MOdular System for Acquisition, Interface and Control (MOSAIC) of detectors and their related electronics for high energy physics experiment

NASA Astrophysics Data System (ADS)

Robertis, G. De; Fanizzi, G.; Loddo, F.; Manzari, V.; Rizzi, M.

2018-02-01

In this work the MOSAIC ("MOdular System for Acquisition, Interface and Control") board, designed for the readout and testing of the pixel modules for the silicon tracker upgrade of the ALICE (A Large Ion Collider Experiment) experiment at teh CERN LHC, is described. It is based on an Artix7 Field Programmable Gate Array device by Xilinx and is compliant with the six unit "Versa Modular Eurocard" standard (6U-VME) for easy housing in a standard VMEbus crate from which it takes only power supplies and cooling.

Command Flight Path Display. Phase I and II.

DTIC Science & Technology

1983-09-01

transmissions over the standard 56K baud interface. The PS-300 was a commercial unit and required some modifications to ensure its reliability in an...1 H7750-AA Battery Backup NADC 5 Oct E2 9 1 LA-12D Decwriter SAI/RtS 4 11ov 82 10 1 BC03M-25 Null Modem Cable SAI/RM0S 4 Nov 82 35 2 ~%*~’ .5°’ 11 1...of about 1200 baud. (The interface hardware is capable of 56K baud transmission, but the standard PS-300 firmware is only able to process input

Compression of facsimile graphics for transmission over digital mobile satellite circuits

NASA Astrophysics Data System (ADS)

Dimolitsas, Spiros; Corcoran, Frank L.

A technique for reducing the transmission requirements of facsimile images while maintaining high intelligibility in mobile communications environments is described. The algorithms developed are capable of achieving a compression of approximately 32 to 1. The technique focuses on the implementation of a low-cost interface unit suitable for facsimile communication between low-power mobile stations and fixed stations for both point-to-point and point-to-multipoint transmissions. This interface may be colocated with the transmitting facsimile terminals. The technique was implemented and tested by intercepting facsimile documents in a store-and-forward mode.

General-purpose interface bus for multiuser, multitasking computer system

NASA Technical Reports Server (NTRS)

Generazio, Edward R.; Roth, Don J.; Stang, David B.

1990-01-01

The architecture of a multiuser, multitasking, virtual-memory computer system intended for the use by a medium-size research group is described. There are three central processing units (CPU) in the configuration, each with 16 MB memory, and two 474 MB hard disks attached. CPU 1 is designed for data analysis and contains an array processor for fast-Fourier transformations. In addition, CPU 1 shares display images viewed with the image processor. CPU 2 is designed for image analysis and display. CPU 3 is designed for data acquisition and contains 8 GPIB channels and an analog-to-digital conversion input/output interface with 16 channels. Up to 9 users can access the third CPU simultaneously for data acquisition. Focus is placed on the optimization of hardware interfaces and software, facilitating instrument control, data acquisition, and processing.

The Texas Thermal Interface: A real-time computer interface for an Inframetrics infrared camera

DOE Office of Scientific and Technical Information (OSTI.GOV)

Storek, D.J.; Gentle, K.W.

1996-03-01

The Texas Thermal Interface (TTI) offers an advantageous alternative to the conventional video path for computer analysis of infrared images from Inframetrics cameras. The TTI provides real-time computer data acquisition of 48 consecutive fields (version described here) with 8-bit pixels. The alternative requires time-consuming individual frame grabs from video tape with frequent loss of resolution in the D/A/D conversion. Within seconds after the event, the TTI temperature files may be viewed and processed to infer heat fluxes or other quantities as needed. The system cost is far less than commercial units which offer less capability. The system was developed formore » and is being used to measure heat fluxes to the plasma-facing components in a tokamak. {copyright} {ital 1996 American Institute of Physics.}« less

The impact of interface design during an initial high-technology AAC experience: a collective case study of people with aphasia.

PubMed

Dietz, Aimee; Weissling, Kristy; Griffith, Julie; McKelvey, Miechelle; Macke, Devan

2014-12-01

The purpose of this collective case study was to describe the communication behaviors of five people with chronic aphasia when they retold personal narratives to an unfamiliar communication partner using four variants of a visual scene display (VSD) interface. The results revealed that spoken language comprised roughly 70% of expressive modality units; variable patterns of use for other modalities emerged. Although inconsistent across participants, several people with aphasia experienced no trouble sources during the retells using VSDs with personally relevant photographs and text boxes. Overall, participants perceived the personally relevant photographs and the text as helpful during the retells. These patterns may serve as a springboard for future experimental investigations regarding how interface design influences the communicative and linguistic performance of people with aphasia.

Project Integration Architecture (PIA) and Computational Analysis Programming Interface (CAPRI) for Accessing Geometry Data from CAD Files

NASA Technical Reports Server (NTRS)

Benyo, Theresa L.

2002-01-01

Integration of a supersonic inlet simulation with a computer aided design (CAD) system is demonstrated. The integration is performed using the Project Integration Architecture (PIA). PIA provides a common environment for wrapping many types of applications. Accessing geometry data from CAD files is accomplished by incorporating appropriate function calls from the Computational Analysis Programming Interface (CAPRI). CAPRI is a CAD vendor neutral programming interface that aids in acquiring geometry data directly from CAD files. The benefits of wrapping a supersonic inlet simulation into PIA using CAPRI are; direct access of geometry data, accurate capture of geometry data, automatic conversion of data units, CAD vendor neutral operation, and on-line interactive history capture. This paper describes the PIA and the CAPRI wrapper and details the supersonic inlet simulation demonstration.

Charge transport and magnetization profile at the interface between the correlated metal CaRuO3 and the antiferromagnetic insulator CaMnO3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Freeland, J. W.; Chakhalian, J.; Boris, A. V.

2010-01-01

A combination of spectroscopic probes was used to develop a detailed experimental description of the transport and magnetic properties of superlattices composed of the paramagnetic metal CaRuO3 and the antiferromagnetic insulator CaMnO3. The charge carrier density and Ru valence state in the superlattices are not significantly different from those of bulk CaRuO3. The small charge transfer across the interface implied by these observations confirms predictions derived from density functional calculations. However, a ferromagnetic polarization due to canted Mn spins penetrates 3-4 unit cells into CaMnO3, far exceeding the corresponding predictions. The discrepancy may indicate the formation of magnetic polarons atmore » the interface.« less

The third level trigger and output event unit of the UA1 data-acquisition system

NASA Astrophysics Data System (ADS)

Cittolin, S.; Demoulin, M.; Fucci, A.; Haynes, W.; Martin, B.; Porte, J. P.; Sphicas, P.

1989-12-01

The upgraded UA1 experiment utilizes twelve 3081/E emulators for its third-level trigger system. The system is interfaced to VME, and is controlled by 68000 microprocessor VME boards on the input and output. The output controller communicates with an IBM 9375 mainframe via the CERN-IBM developed VICI interface. The events selected by the emulators are output on IBM-3480 cassettes. The user interface to this system is based on a series of Macintosh personal computer connected to the VME bus. These Macs are also used for developing software for the emulators and for monitoring the entire system. The same configuration has also been used for offline event reconstruction. A description of the system, together with details of both the online and offline modes of operation and an eveluation of its performance are presented.

A User-Centred Approach to E-Book Design.

ERIC Educational Resources Information Center

Wilson, Ruth; Landoni, Monica; Gibb, Forbes

2002-01-01

Considers the Electronic Books On-Screen Interface (EBONI) Project's research into the importance of the user when designing electronic textbooks. Describes methodology and evaluations involving students, lecturers and researchers in United Kingdom higher education and includes electronic textbook design guidelines. (Author/LRW)

77 FR 38608 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-28

..., professional qualifications and skills, training courses completed, certifications received, level of education... Activity Unit Identification Code (UIC).'' Safeguards: Delete entry and replace with ``The NTMPS servers.... All data transferred is encrypted. The interface server is protected from attempts to penetrate the...

An Overview of U.S. Trends in Educational Software Design.

ERIC Educational Resources Information Center

Colvin, Linda B.

1989-01-01

Describes trends in educational software design in the United States for elementary and secondary education. Highlights include user-friendly software; learner control; interfacing the computer with other media, including television, telecommunications networks, and optical disk technology; microworlds; graphics; word processing; database…

Digital Data Recording System (DDRS) operating and maintenance manual

NASA Technical Reports Server (NTRS)

Griffin, C. R.; Jones, J. I.

1980-01-01

The digital data recording system (DDRS) was designed, fabricated, tested, and delivered. This unit is the interface between the synthetic aperture radar (SAR) and the recording system. The SAR data are formatted in the DDRS for data processing on the ground.

Autonomous caregiver following robotic wheelchair

NASA Astrophysics Data System (ADS)

Ratnam, E. Venkata; Sivaramalingam, Sethurajan; Vignesh, A. Sri; Vasanth, Elanthendral; Joans, S. Mary

2011-12-01

In the last decade, a variety of robotic/intelligent wheelchairs have been proposed to meet the need in aging society. Their main research topics are autonomous functions such as moving toward some goals while avoiding obstacles, or user-friendly interfaces. Although it is desirable for wheelchair users to go out alone, caregivers often accompany them. Therefore we have to consider not only autonomous functions and user interfaces but also how to reduce caregivers' load and support their activities in a communication aspect. From this point of view, we have proposed a robotic wheelchair moving with a caregiver side by side based on the MATLAB process. In this project we discussing about robotic wheel chair to follow a caregiver by using a microcontroller, Ultrasonic sensor, keypad, Motor drivers to operate robot. Using camera interfaced with the DM6437 (Davinci Code Processor) image is captured. The captured image are then processed by using image processing technique, the processed image are then converted into voltage levels through MAX 232 level converter and given it to the microcontroller unit serially and ultrasonic sensor to detect the obstacle in front of robot. In this robot we have mode selection switch Automatic and Manual control of robot, we use ultrasonic sensor in automatic mode to find obstacle, in Manual mode to use the keypad to operate wheel chair. In the microcontroller unit, c language coding is predefined, according to this coding the robot which connected to it was controlled. Robot which has several motors is activated by using the motor drivers. Motor drivers are nothing but a switch which ON/OFF the motor according to the control given by the microcontroller unit.

Gesture Based Control and EMG Decomposition

NASA Technical Reports Server (NTRS)

Wheeler, Kevin R.; Chang, Mindy H.; Knuth, Kevin H.

2005-01-01

This paper presents two probabilistic developments for use with Electromyograms (EMG). First described is a new-electric interface for virtual device control based on gesture recognition. The second development is a Bayesian method for decomposing EMG into individual motor unit action potentials. This more complex technique will then allow for higher resolution in separating muscle groups for gesture recognition. All examples presented rely upon sampling EMG data from a subject's forearm. The gesture based recognition uses pattern recognition software that has been trained to identify gestures from among a given set of gestures. The pattern recognition software consists of hidden Markov models which are used to recognize the gestures as they are being performed in real-time from moving averages of EMG. Two experiments were conducted to examine the feasibility of this interface technology. The first replicated a virtual joystick interface, and the second replicated a keyboard. Moving averages of EMG do not provide easy distinction between fine muscle groups. To better distinguish between different fine motor skill muscle groups we present a Bayesian algorithm to separate surface EMG into representative motor unit action potentials. The algorithm is based upon differential Variable Component Analysis (dVCA) [l], [2] which was originally developed for Electroencephalograms. The algorithm uses a simple forward model representing a mixture of motor unit action potentials as seen across multiple channels. The parameters of this model are iteratively optimized for each component. Results are presented on both synthetic and experimental EMG data. The synthetic case has additive white noise and is compared with known components. The experimental EMG data was obtained using a custom linear electrode array designed for this study.

Fluid content along the subduction plate interface: how it impacts the long- (and short-) term rheology and exhumation modes

NASA Astrophysics Data System (ADS)

Agard, Philippe; Angiboust, Samuel; Guillot, Stéphane; Burov, Evgueni

2015-04-01

Over the last decade, many studies based on field, petrological and geophysical evidence have emphasized the link between mineral reactions, fluid release and seismogenesis, either along the whole plate interface (eg., Hacker et al., 2003) or at specific depths (e.g., ~30 km: Audet et al., 2009; ~70-80 km: Angiboust et al., 2012). Although they argue for a crucial influence of fluids on subduction processes, large uncertainties remain when assessing their impact on the rheology of the plate interface across space and time. Kilometer-scale accreted terranes/units in both ancient and present-day subduction zones potentially allow to track changes in mechanical coupling along the plate interface. Despite some potential biases (exhumation is limited and episodic, lasting no more than a few My if any, from prefered depths -- mainly 30-40 and 70-80 km, and there are so far only few examples precisely located with respect to the plate interface) their record of changes in fluid regime and strain localisation is extremely valuable. One striking example of the role of fluids on plate interface rheology during nascent subduction is provided by metamorphic soles (i.e., ~500 m thick tectonic slices welded to the base of ophiolites). We show that their accretion to the ophiolite indeed only happens across a transient, optimal time-T-P window (after < 1-2 My, at 1±0.2 GPa, 750-850°C) associated with fluid release and infiltration, leading to similar effective rheology on both sides (i.e., downgoing crust and mantle wedge). This maximizes interplate mechanical coupling, as deformation gets distributed over a large band encompassing the plate interface (i.e., a few km), and promotes detachment of the sole from the sinking slab. We also show how tectonic slicing during mature subduction likely relates to short-term fluid release and repeated seismicity, based on the Monviso exposures (W. Alps, a relatively continuous, 15 km long fragment of oceanic lithosphere exhumed from ~80 km depths), which preserve evidence of intraslab fluid flow and eclogitic, intermediate-depth seismicity of Mw ~4. We finally address how, in the long-term and at subduction scale, the overall fluid content and fluid regime may control the slicing, size and metastability of exhumed units. We propose that mechanical coupling varies through time, from weak to strong, as a function of the contrast of effective viscosity on either side of the interface: a young and wet subduction interface will promote the formation of knockers and sole accretion, whereas a fluid-present yet drier and colder one will lead to mainly metasedimentary underplated material and large-scale slivers of (metastable) oceanic lithosphere. This interpretation is supported by bi-phase numerical models (allowing for fluid migration driven by concentrations in the rocks, non-lithostatic pressure gradients and deformation, mantle wedge hydration and mechanical weakening of the plate interface) showing that the detachment of large-scale oceanic tectonic slices is in particular promoted by fluid migration along the subduction interface. [Hacker et al., Journal of Geophysical Research 2003; Audet et al., Nature, 2009; Angiboust et al., Geology 2012

Soft brain-machine interfaces for assistive robotics: A novel control approach.

PubMed

Schiatti, Lucia; Tessadori, Jacopo; Barresi, Giacinto; Mattos, Leonardo S; Ajoudani, Arash

2017-07-01

Robotic systems offer the possibility of improving the life quality of people with severe motor disabilities, enhancing the individual's degree of independence and interaction with the external environment. In this direction, the operator's residual functions must be exploited for the control of the robot movements and the underlying dynamic interaction through intuitive and effective human-robot interfaces. Towards this end, this work aims at exploring the potential of a novel Soft Brain-Machine Interface (BMI), suitable for dynamic execution of remote manipulation tasks for a wide range of patients. The interface is composed of an eye-tracking system, for an intuitive and reliable control of a robotic arm system's trajectories, and a Brain-Computer Interface (BCI) unit, for the control of the robot Cartesian stiffness, which determines the interaction forces between the robot and environment. The latter control is achieved by estimating in real-time a unidimensional index from user's electroencephalographic (EEG) signals, which provides the probability of a neutral or active state. This estimated state is then translated into a stiffness value for the robotic arm, allowing a reliable modulation of the robot's impedance. A preliminary evaluation of this hybrid interface concept provided evidence on the effective execution of tasks with dynamic uncertainties, demonstrating the great potential of this control method in BMI applications for self-service and clinical care.

Liquid-Vapor Interface Configurations Investigated in Low Gravity

NASA Technical Reports Server (NTRS)

Concus, Paul; Finn, Robert; Weislogel, Mark M.

1998-01-01

The Interface Configuration Experiment (ICE) is part of a multifaceted study that is exploring the often striking behavior of liquid-vapor interfaces in low-gravity environments. Although the experiment was posed largely as a test of current mathematical theory, applications of the results should be manifold. In space almost every fluid system is affected, if not dominated, by capillarity (the effects of surface tension). As a result, knowledge of fluid interface behavior, in particular an equilibrium interface shape from which any analysis must begin, is fundamental--from the control of liquid fuels and oxygen in storage tanks to the design and development of inspace thermal systems, such as heat pipes and capillary pumped loops. ICE has increased, and should continue to increase, such knowledge as it probes the specific peculiarities of current theory upon which our present understanding rests. Several versions of ICE have been conducted in the drop towers at the NASA Lewis Research Center, on the space shuttles during the first and second United States Microgravity Laboratory missions (USML-1 and USML-2), and most recently aboard the Russian Mir space station. These studies focused on interfacial problems concerning the existence, uniqueness, configuration, stability, and flow characteristics of liquid-vapor interfaces. Results to date have clearly demonstrated the value of the present theory and the extent to which it can predict the behavior of capillary systems.

Measurement Error in Atomic-Scale Scanning Transmission Electron Microscopy—Energy-Dispersive X-Ray Spectroscopy (STEM-EDS) Mapping of a Model Oxide Interface

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spurgeon, Steven R.; Du, Yingge; Chambers, Scott A.

Abstract With the development of affordable aberration correctors, analytical scanning transmission electron microscopy (STEM) studies of complex interfaces can now be conducted at high spatial resolution at laboratories worldwide. Energy-dispersive X-ray spectroscopy (EDS) in particular has grown in popularity, as it enables elemental mapping over a wide range of ionization energies. However, the interpretation of atomically resolved data is greatly complicated by beam–sample interactions that are often overlooked by novice users. Here we describe the practical factors—namely, sample thickness and the choice of ionization edge—that affect the quantification of a model perovskite oxide interface. Our measurements of the same sample,more » in regions of different thickness, indicate that interface profiles can vary by as much as 2–5 unit cells, depending on the spectral feature. This finding is supported by multislice simulations, which reveal that on-axis maps of even perfectly abrupt interfaces exhibit significant delocalization. Quantification of thicker samples is further complicated by channeling to heavier sites across the interface, as well as an increased signal background. We show that extreme care must be taken to prepare samples to minimize channeling effects and argue that it may not be possible to extract atomically resolved information from many chemical maps.« less

Development of a software interface for optical disk archival storage for a new life sciences flight experiments computer

NASA Technical Reports Server (NTRS)

Bartram, Peter N.

1989-01-01

The current Life Sciences Laboratory Equipment (LSLE) microcomputer for life sciences experiment data acquisition is now obsolete. Among the weaknesses of the current microcomputer are small memory size, relatively slow analog data sampling rates, and the lack of a bulk data storage device. While life science investigators normally prefer data to be transmitted to Earth as it is taken, this is not always possible. No down-link exists for experiments performed in the Shuttle middeck region. One important aspect of a replacement microcomputer is provision for in-flight storage of experimental data. The Write Once, Read Many (WORM) optical disk was studied because of its high storage density, data integrity, and the availability of a space-qualified unit. In keeping with the goals for a replacement microcomputer based upon commercially available components and standard interfaces, the system studied includes a Small Computer System Interface (SCSI) for interfacing the WORM drive. The system itself is designed around the STD bus, using readily available boards. Configurations examined were: (1) master processor board and slave processor board with the SCSI interface; (2) master processor with SCSI interface; (3) master processor with SCSI and Direct Memory Access (DMA); (4) master processor controlling a separate STD bus SCSI board; and (5) master processor controlling a separate STD bus SCSI board with DMA.

Measurement Error in Atomic-Scale Scanning Transmission Electron Microscopy—Energy-Dispersive X-Ray Spectroscopy (STEM-EDS) Mapping of a Model Oxide Interface

DOE PAGES

Spurgeon, Steven R.; Du, Yingge; Chambers, Scott A.

2017-04-05

Abstract With the development of affordable aberration correctors, analytical scanning transmission electron microscopy (STEM) studies of complex interfaces can now be conducted at high spatial resolution at laboratories worldwide. Energy-dispersive X-ray spectroscopy (EDS) in particular has grown in popularity, as it enables elemental mapping over a wide range of ionization energies. However, the interpretation of atomically resolved data is greatly complicated by beam–sample interactions that are often overlooked by novice users. Here we describe the practical factors—namely, sample thickness and the choice of ionization edge—that affect the quantification of a model perovskite oxide interface. Our measurements of the same sample,more » in regions of different thickness, indicate that interface profiles can vary by as much as 2–5 unit cells, depending on the spectral feature. This finding is supported by multislice simulations, which reveal that on-axis maps of even perfectly abrupt interfaces exhibit significant delocalization. Quantification of thicker samples is further complicated by channeling to heavier sites across the interface, as well as an increased signal background. We show that extreme care must be taken to prepare samples to minimize channeling effects and argue that it may not be possible to extract atomically resolved information from many chemical maps.« less

Thermal force induced by the presence of a particle near a solidifying interface.

PubMed

Hadji, L

2001-11-01

The presence of a foreign particle in the melt, ahead of a solid-liquid interface, leads to the onset of interfacial deformations if the thermal conductivity of the particle, k(p), differs from that of the melt, k(l). In this paper, the influence of the thermal conductivity contrast on the interaction between the solidifying interface and the particle is quantified. We show that the interface distortion gives rise to a thermal force whose expression is given by F(th)=2piLGa3(1-alpha)/(2+alpha)T(m), where L is the latent heat of fusion per unit volume, T(m) is the melting point, a is the particle's radius, G the thermal gradient in the liquid phase and alpha=k(p)/k(l). The derivation makes use of the following assumptions: (i) the particle is small compared to the horizontal extent of the interface, (ii) the particle is placed in the near proximity of the deformable solid-liquid interface, and (iii) the interface is practically immobile in the calculation of the thermal field, i.e., V

The design, development, and implementation of a data acquisition and handling system at Basin Electric Power Cooperative

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baranowski, S.T.; Culp, L.R.; Jonas, T.S.

1995-12-31

The Clean Air Act Amendments of 1990 require all Phase 1 and 2 utilities to install Continuous Emissions Monitoring Systems (CEMS), which can consist of instrumentation including analyzers and a Data Acquisition and Handling System (DAHS). To meet these requirements, Basin Electric Power Cooperative contracted with Black and Veatch to design and develop a DAHS which would meet all 40 CFR Part 75 requirements. Basin Electric provided the specifications for the DAHS and the graphical user interface, and B and V designed, developed, and installed a DAHS at 3 units at Laramie River Station, 2 units at Antelope Valley Station,more » and 2 units at Leland Olds Station. B and V utilized the existing equipment, adding to it a unique DAHS design. B and V designed and implemented the DAHS which operates in the OS/2 environment to interface with multiple programmable logic controllers. This unique software was written in modular form so that multiple programs run in unison, monitoring each other for errors to ensure continuous operation. The reporting structure is flexible to allow for a variety of formats, including those specifically required by the state to meet CAAA guidelines. Today, these seven units are in operation and comply with the CAAA. This paper describes the issues faced during specification, general design, compliance, and implementation of the DAHS at BEPC, including the lessons learned. The continuous emissions monitoring (CEM) system for each unit at BEPC consisted of a set of dilution probe analyzers for measuring SO{sub 2}, NO{sub x}, and CO{sub 2}.« less

Conceptual design of the X-IFU Instrument Control Unit on board the ESA Athena mission

NASA Astrophysics Data System (ADS)

Corcione, L.; Ligori, S.; Capobianco, V.; Bonino, D.; Valenziano, L.; Guizzo, G. P.

2016-07-01

Athena is one of L-class missions selected in the ESA Cosmic Vision 2015-2025 program for the science theme of the Hot and Energetic Universe. The Athena model payload includes the X-ray Integral Field Unit (X-IFU), an advanced actively shielded X-ray microcalorimeter spectrometer for high spectral resolution imaging, utilizing cooled Transition Edge Sensors. This paper describes the preliminary architecture of Instrument Control Unit (ICU), which is aimed at operating all XIFU's subsystems, as well as at implementing the main functional interfaces of the instrument with the S/C control unit. The ICU functions include the TC/TM management with S/C, science data formatting and transmission to S/C Mass Memory, housekeeping data handling, time distribution for synchronous operations and the management of the X-IFU components (i.e. CryoCoolers, Filter Wheel, Detector Readout Electronics Event Processor, Power Distribution Unit). ICU functions baseline implementation for the phase-A study foresees the usage of standard and Space-qualified components from the heritage of past and current space missions (e.g. Gaia, Euclid), which currently encompasses Leon2/Leon3 based CPU board and standard Space-qualified interfaces for the exchange commands and data between ICU and X-IFU subsystems. Alternative architecture, arranged around a powerful PowerPC-based CPU, is also briefly presented, with the aim of endowing the system with enhanced hardware resources and processing power capability, for the handling of control and science data processing tasks not defined yet at this stage of the mission study.

Finding the Balance Between Schoolhouse and On-the-Job Training

DTIC Science & Technology

2007-01-01

military training [BMT] to 3-level award1 for mission-ready airmen). Specifically, we examined seven specialties: Airborne Crypto - logic Linguist (Air...sup- port and interfaces with other units. Performs and assists in mission planning. Maintains publications and currency items. Maintains and

STS-5 Columbia, OV-102, middeck documentation

NASA Technical Reports Server (NTRS)

1982-01-01

Items stowed temporarily on forward middeck lockers include (left to right) field sequential (FS) crew cabin camera, procedural notebook, communications kit assembly (assy) headset (HDST) interface unit (HIU), personal hygiene kit, personal hygiene mirror assy, meal tray assemblies, towels, and Vestibular Study Experiment headset and antenna.

Applied Meteorology Unit (AMU) Quarterly Report. First Quarter FY-05

NASA Technical Reports Server (NTRS)

Bauman, William; Wheeler, Mark; Lambert, Winifred; Case, Jonathan; Short, David

2005-01-01

This report summarizes the Applied Meteorology Unit (AMU) activities for the first quarter of Fiscal Year 2005 (October - December 2005). Tasks reviewed include: (1) Objective Lightning Probability Forecast: Phase I, (2) Severe Weather Forecast Decision Aid, (3) Hail Index, (4) Stable Low Cloud Evaluation, (5) Shuttle Ascent Camera Cloud Obstruction Forecast, (6) Range Standardization and Automation (RSA) and Legacy Wind Sensor Evaluation, (7) Advanced Regional Prediction System (ARPS) Optimization and Training Extension, and (8) User Control Interface for ARPS Data Analysis System (ADAS) Data Ingest

Specifications Physiological Monitoring System

NASA Technical Reports Server (NTRS)

1985-01-01

The operation of a physiological monitoring system (PMS) is described. Specifications were established for performance, design, interface, and test requirements. The PMS is a compact, microprocessor-based system, which can be worn in a pack on the body or may be mounted on a Spacelab rack or other appropriate structure. It consists of two modules, the Data Control Unit (DCU) and the Remote Control/Display Unit (RCDU). Its purpose is to collect and distribute data from physiological experiments in the Spacelab and in the Orbiter.

Astronaut tool development: An orbital replaceable unit-portable handhold

NASA Technical Reports Server (NTRS)

Redmon, John W., Jr.

1989-01-01

A tool to be used during astronaut Extra-Vehicular Activity (EVA) replacement of spent or defective electrical/electronic component boxes is described. The generation of requirements and design philosophies are detailed, as well as specifics relating to mechanical development, interface verifications, testing, and astronaut feedback. Findings are presented in the form of: (1) a design which is universally applicable to spacecraft component replacement, and (2) guidelines that the designer of orbital replacement units might incorporate to enhance spacecraft on-orbit maintainability and EVA mission safety.

Enhanced Master Controller Unit Tester

NASA Technical Reports Server (NTRS)

Benson, Patricia; Johnson, Yvette; Johnson, Brian; Williams, Philip; Burton, Geoffrey; McCoy, Anthony

2007-01-01

The Enhanced Master Controller Unit Tester (EMUT) software is a tool for development and testing of software for a master controller (MC) flight computer. The primary function of the EMUT software is to simulate interfaces between the MC computer and external analog and digital circuitry (including other computers) in a rack of equipment to be used in scientific experiments. The simulations span the range of nominal, off-nominal, and erroneous operational conditions, enabling the testing of MC software before all the equipment becomes available.

Conducting Research on the International Space Station Using the EXPRESS Rack Facilities

NASA Technical Reports Server (NTRS)

Thompson, Sean W.; Lake, Robert E.

2013-01-01

Eight "Expedite the Processing of Experiments to Space Station" (EXPRESS) Rack facilities are located within the International Space Station (ISS) laboratories to provide standard resources and interfaces for the simultaneous and independent operation of multiple experiments within each rack. Each EXPRESS Rack provides eight Middeck Locker Equivalent locations and two drawer locations for powered experiment equipment, also referred to as sub-rack payloads. Payload developers may provide their own structure to occupy the equivalent volume of one, two, or four lockers as a single unit. Resources provided for each location include power (28 Vdc, 0-500 W), command and data handling (Ethernet, RS-422, 5 Vdc discrete, +/- 5 Vdc analog), video (NTSC/RS 170A), and air cooling (0-200 W). Each rack also provides water cooling (500 W) for two locations, one vacuum exhaust interface, and one gaseous nitrogen interface. Standard interfacing cables and hoses are provided on-orbit. One laptop computer is provided with each rack to control the rack and to accommodate payload application software. Four of the racks are equipped with the Active Rack Isolation System to reduce vibration between the ISS and the rack. EXPRESS Racks are operated by the Payload Operations Integration Center at Marshall Space Flight Center and the sub-rack experiments are operated remotely by the investigating organization. Payload Integration Managers serve as a focal to assist organizations developing payloads for an EXPRESS Rack. NASA provides EXPRESS Rack simulator software for payload developers to checkout payload command and data handling at the development site before integrating the payload with the EXPRESS Functional Checkout Unit for an end-to-end test before flight. EXPRESS Racks began supporting investigations onboard ISS on April 24, 2001 and will continue through the life of the ISS.

Conducting Research on the International Space Station using the EXPRESS Rack Facilities

NASA Technical Reports Server (NTRS)

Thompson, Sean W.; Lake, Robert E.

2016-01-01

Eight "Expedite the Processing of Experiments to Space Station" (EXPRESS) Rack facilities are located within the International Space Station (ISS) laboratories to provide standard resources and interfaces for the simultaneous and independent operation of multiple experiments within each rack. Each EXPRESS Rack provides eight Middeck Locker Equivalent locations and two drawer locations for powered experiment equipment, also referred to as sub-rack payloads. Payload developers may provide their own structure to occupy the equivalent volume of one, two, or four lockers as a single unit. Resources provided for each location include power (28 Vdc, 0-500 W), command and data handling (Ethernet, RS-422, 5 Vdc discrete, +/- 5 Vdc analog), video (NTSC/RS 170A), and air cooling (0-200 W). Each rack also provides water cooling for two locations (500W ea.), one vacuum exhaust interface, and one gaseous nitrogen interface. Standard interfacing cables and hoses are provided on-orbit. One laptop computer is provided with each rack to control the rack and to accommodate payload application software. Four of the racks are equipped with the Active Rack Isolation System to reduce vibration between the ISS and the rack. EXPRESS Racks are operated by the Payload Operations Integration Center at Marshall Space Flight Center and the sub-rack experiments are operated remotely by the investigating organization. Payload Integration Managers serve as a focal to assist organizations developing payloads for an EXPRESS Rack. NASA provides EXPRESS Rack simulator software for payload developers to checkout payload command and data handling at the development site before integrating the payload with the EXPRESS Functional Checkout Unit for an end-to-end test before flight. EXPRESS Racks began supporting investigations onboard ISS on April 24, 2001 and will continue through the life of the ISS.

Adaptive Phase Delay Generator

NASA Technical Reports Server (NTRS)

Greer, Lawrence

2013-01-01

There are several experimental setups involving rotating machinery that require some form of synchronization. The adaptive phase delay generator (APDG) the Bencic-1000 is a flexible instrument that allows the user to generate pulses synchronized to the rising edge of a tachometer signal from any piece of rotating machinery. These synchronized pulses can vary by the delay angle, pulse width, number of pulses per period, number of skipped pulses, and total number of pulses. Due to the design of the pulse generator, any and all of these parameters can be changed independently, yielding an unparalleled level of versatility. There are two user interfaces to the APDG. The first is a LabVIEW program that has the advantage of displaying all of the pulse parameters and input signal data within one neatly organized window on the PC monitor. Furthermore, the LabVIEW interface plots the rpm of the two input signal channels in real time. The second user interface is a handheld portable device that goes anywhere a computer is not accessible. It consists of a liquid-crystal display and keypad, which enable the user to control the unit by scrolling through a host of command menus and parameter listings. The APDG combines all of the desired synchronization control into one unit. The experimenter can adjust the delay, pulse width, pulse count, number of skipped pulses, and produce a specified number of pulses per revolution. Each of these parameters can be changed independently, providing an unparalleled level of versatility when synchronizing hardware to a host of rotating machinery. The APDG allows experimenters to set up quickly and generate a host of synchronizing configurations using a simple user interface, which hopefully leads to faster results.

An efficient micro control unit with a reconfigurable filter design for wireless body sensor networks (WBSNs).

PubMed

Chen, Chiung-An; Chen, Shih-Lun; Huang, Hong-Yi; Luo, Ching-Hsing

2012-11-22

In this paper, a low-cost, low-power and high performance micro control unit (MCU) core is proposed for wireless body sensor networks (WBSNs). It consists of an asynchronous interface, a register bank, a reconfigurable filter, a slop-feature forecast, a lossless data encoder, an error correct coding (ECC) encoder, a UART interface, a power management (PWM), and a multi-sensor controller. To improve the system performance and expansion abilities, the asynchronous interface is added for handling signal exchanges between different clock domains. To eliminate the noise of various bio-signals, the reconfigurable filter is created to provide the functions of average, binomial and sharpen filters. The slop-feature forecast and the lossless data encoder is proposed to reduce the data of various biomedical signals for transmission. Furthermore, the ECC encoder is added to improve the reliability for the wireless transmission and the UART interface is employed the proposed design to be compatible with wireless devices. For long-term healthcare monitoring application, a power management technique is developed for reducing the power consumption of the WBSN system. In addition, the proposed design can be operated with four different bio-sensors simultaneously. The proposed design was successfully tested with a FPGA verification board. The VLSI architecture of this work contains 7.67-K gate counts and consumes the power of 5.8 mW or 1.9 mW at 100 MHz or 133 MHz processing rate using a TSMC 0.18 μm or 0.13 μm CMOS process. Compared with previous techniques, this design achieves higher performance, more functions, more flexibility and higher compatibility than other micro controller designs.

Predicting the pKa and stability of organic acids and bases at an oil-water interface.

PubMed

Andersson, M P; Olsson, M H M; Stipp, S L S

2014-06-10

We have used density functional theory and the implicit solvent model, COSMO-RS, to investigate how the acidity constant, pKa, of organic acids and bases adsorbed at the organic compound-aqueous solution interface changes, compared to its value in the aqueous phase. The pKa determine the surface charge density of the molecules that accumulate at the fluid-fluid interface. We have estimated the pKa by comparing the stability of the protonated and unprotonated forms of a series of molecules in the bulk aqueous solution and at an interface where parts of each molecule reside in the hydrophobic phase and the rest remains in the hydrophilic phase. We found that the pKa for acids is shifted by ∼1 pH unit to higher values compared to the bulk water pKa, whereas they are shifted to lower values by a similar amount for bases. Because this pKa shift is similar in magnitude for each of the molecules studied, we propose that the pKa for molecules at a water-organic compound interface can easily be predicted by adding a small shift to the aqueous pKa. This shift is general and correlates with the functional group. We also found that the relative composition of molecules at the fluid-fluid interface is not the same as in the bulk. For example, species such as carboxylic acids are enriched at the interface, where they can dominate surface properties, even when they are a modest component in the bulk fluid. For high surface concentrations of carboxylic acid groups at an interface, such as a self-assembled monolayer, we have demonstrated that the pKa depends on the degree of deprotonation through direct hydrogen bonding between protonated and deprotonated acidic headgroups.

Holding the Nucleosome Together: A Quantitative Description of the DNA-Histone Interface in Solution.

PubMed

Elbahnsi, Ahmad; Retureau, Romain; Baaden, Marc; Hartmann, Brigitte; Oguey, Christophe

2018-02-13

The nucleosome is the fundamental unit of eukaryotic genome packaging in the chromatin. In this complex, the DNA wraps around eight histone proteins to form a superhelical double helix. The resulting bending, stronger than anything observed in free DNA, raises the question of how such a distortion is stabilized by the proteic and solvent environments. In this work, the DNA-histone interface in solution was exhaustively analyzed from nucleosome structures generated by molecular dynamics. An original Voronoi tessellation technique, measuring the topology of interacting elements without any empirical or subjective adjustment, was used to characterize the interface in terms of contact area and occurrence. Our results revealed an interface more robust than previously known, combining extensive, long-lived nonelectrostatic and electrostatic interactions between DNA and both structured and unstructured histone regions. Cation accumulation makes the proximity of juxtaposed DNA gyres in the superhelix possible by shielding the strong electrostatic repulsion of the charged phosphate groups. Overall, this study provides new insights on the nucleosome cohesion, explaining how DNA distortions can be maintained in a nucleoprotein complex.

Testing of FTS fingers and interface using a passive compliant robot manipulator. [flight telerobot servicer

NASA Technical Reports Server (NTRS)

Nguyen, Charles C.; Antrazi, Sami S.

1992-01-01

This report deals with testing of a pair of robot fingers designed for the Flight Telerobotic Servicer (FTS) to grasp a cylinder type of Orbital Replaceable Unit (ORU) interface. The report first describes the objectives of the study and then the testbed consisting of a Stewart Platform-based manipulator equipped with a passive compliant platform which also serves as a force/torque sensor. Kinematic analysis is then performed to provide a closed-form solution for the force inverse kinematics and iterative solution for the force forward kinematics using the Newton's Raphson Method. Mathematical expressions are then derived to compute force/torques applied to the FTS fingers during the mating/demating with the interface. The report then presents the three parts of the experimental study on the feasibility and characteristics of the fingers. The first part obtains data of forces applied by the fingers to the interface under various misalignments, the second part determines the maximum allowable capture angles for mating, and the third part processes and interprets the obtained force/torque data.

New tracking implementation in the Deep Space Network

NASA Technical Reports Server (NTRS)

Berner, Jeff B.; Bryant, Scott H.

2001-01-01

As part of the Network Simplification Project, the tracking system of the Deep Space Network is being upgraded. This upgrade replaces the discrete logic sequential ranging system with a system that is based on commercial Digital Signal Processor boards. The new implementation allows both sequential and pseudo-noise types of ranging. The other major change is a modernization of the data formatting. Previously, there were several types of interfaces, delivering both intermediate data and processed data (called 'observables'). All of these interfaces were bit-packed blocks, which do not allow for easy expansion, and many of these interfaces required knowledge of the specific hardware implementations. The new interface supports four classes of data: raw (direct from the measuring equipment), derived (the observable data), interferometric (multiple antenna measurements), and filtered (data whose values depend on multiple measurements). All of the measurements are reported at the sky frequency or phase level, so that no knowledge of the actual hardware is required. The data is formatted into Standard Formatted Data Units, as defined by the Consultative Committee for Space Data Systems, so that expansion and cross-center usage is greatly enhanced.

Interfacial Symmetry Control of Emergent Ferromagnetism

NASA Astrophysics Data System (ADS)

Grutter, Alexander; Borchers, Julie; Kirby, Brian; He, Chunyong; Arenholz, Elke; Vailionis, Arturas; Flint, Charles; Suzuki, Yuri

Atomically precise complex oxide heterostructures provide model systems for the discovery of new emergent phenomena since their magnetism, structure and electronic properties are strongly coupled. Octahedral tilts and rotations have been shown to alter the magnetic properties of complex oxide heterostructures, but typically induce small, gradual magnetic changes. Here, we demonstrate sharp switching between ferromagnetic and antiferromagnetic order at the emergent ferromagnetic interfaces of CaRuO3/CaMnO3 superlattices. Through synchrotron X-ray diffraction and neutron reflectometry, we show that octahedral distortions in superlattices with an odd number of CaMnO3 unit cells in each layer are symmetry mismatched across the interface. In this case, the rotation symmetry switches across the interface, reducing orbital overlap, suppressing charge transfer from Ru to Mn, and disrupting the interfacial double exchange. This disruption switches half of the interfaces from ferromagnetic to antiferromagnetic and lowers the saturation magnetic of the superlattice from 1.0 to 0.5 μB/interfacial Mn. By targeting a purely interfacial emergent magnetic system, we achieve drastic alterations to the magnetic ground state with extremely small changes in layer thickness.

Common Readout Unit (CRU) - A new readout architecture for the ALICE experiment

NASA Astrophysics Data System (ADS)

Mitra, J.; Khan, S. A.; Mukherjee, S.; Paul, R.

2016-03-01

The ALICE experiment at the CERN Large Hadron Collider (LHC) is presently going for a major upgrade in order to fully exploit the scientific potential of the upcoming high luminosity run, scheduled to start in the year 2021. The high interaction rate and the large event size will result in an experimental data flow of about 1 TB/s from the detectors, which need to be processed before sending to the online computing system and data storage. This processing is done in a dedicated Common Readout Unit (CRU), proposed for data aggregation, trigger and timing distribution and control moderation. It act as common interface between sub-detector electronic systems, computing system and trigger processors. The interface links include GBT, TTC-PON and PCIe. GBT (Gigabit transceiver) is used for detector data payload transmission and fixed latency path for trigger distribution between CRU and detector readout electronics. TTC-PON (Timing, Trigger and Control via Passive Optical Network) is employed for time multiplex trigger distribution between CRU and Central Trigger Processor (CTP). PCIe (Peripheral Component Interconnect Express) is the high-speed serial computer expansion bus standard for bulk data transport between CRU boards and processors. In this article, we give an overview of CRU architecture in ALICE, discuss the different interfaces, along with the firmware design and implementation of CRU on the LHCb PCIe40 board.

Toward an autonomous brain machine interface: integrating sensorimotor reward modulation and reinforcement learning.

PubMed

Marsh, Brandi T; Tarigoppula, Venkata S Aditya; Chen, Chen; Francis, Joseph T

2015-05-13

For decades, neurophysiologists have worked on elucidating the function of the cortical sensorimotor control system from the standpoint of kinematics or dynamics. Recently, computational neuroscientists have developed models that can emulate changes seen in the primary motor cortex during learning. However, these simulations rely on the existence of a reward-like signal in the primary sensorimotor cortex. Reward modulation of the primary sensorimotor cortex has yet to be characterized at the level of neural units. Here we demonstrate that single units/multiunits and local field potentials in the primary motor (M1) cortex of nonhuman primates (Macaca radiata) are modulated by reward expectation during reaching movements and that this modulation is present even while subjects passively view cursor motions that are predictive of either reward or nonreward. After establishing this reward modulation, we set out to determine whether we could correctly classify rewarding versus nonrewarding trials, on a moment-to-moment basis. This reward information could then be used in collaboration with reinforcement learning principles toward an autonomous brain-machine interface. The autonomous brain-machine interface would use M1 for both decoding movement intention and extraction of reward expectation information as evaluative feedback, which would then update the decoding algorithm as necessary. In the work presented here, we show that this, in theory, is possible. Copyright © 2015 the authors 0270-6474/15/357374-14$15.00/0.

Evaluation of Maltose-Induced Chemical Degradation at the Interface of Bilayer Tablets.

PubMed

Matsuzaki, Naoya; Yamamoto, Yousuke; Murayama, Daisuke; Katakawa, Yoshifumi; Mimura, Hisashi; Kimura, Shin-Ichiro; Iwao, Yasunori; Itai, Shigeru

2017-01-01

Fixed dose combination tablets consisting of mirabegron (MB) and solifenacin succinate (SS) were developed and formulated into bilayer tablets in the current study. The results of a chemical stability study showed that the original formulation for the tablets led to a significant increase of unknown degradants in the SS layer. Two compatibility studies were conducted to simulate the interface between the MB and SS layers, and the results revealed that the degradants only formed in the presence of both active pharmaceutical ingredients (APIs), and that the presence of maltose in the SS layer was critical to inducing degradation. High resolution mass spectroscopy coupled with high performance liquid chromatography was used to determine the chemical structures of the degradants, which were identified to MB derivatives bearing one or two sugar units. These findings therefore suggested that the degradation of the API could be attributed to the addition of sugar units from maltose to MB under the acidic conditions caused by SS. With this in mind, we developed a new formulation by replacing maltose with hydroxypropyl cellulose as a polymer-type binder. The results showed that this formulation suppressed the formation of the degradants. The results of this study have shown that chemical degradation can occur at the interface of bilayer tablets and that an alternative strategy is available to formulate more stable MB/SS bilayer tablets.

Using the Graphing Calculator--in Two-Dimensional Motion Plots.

ERIC Educational Resources Information Center

Brueningsen, Chris; Bower, William

1995-01-01

Presents a series of simple activities involving generalized two-dimensional motion topics to prepare students to study projectile motion. Uses a pair of motion detectors, each connected to a calculator-based-laboratory (CBL) unit interfaced with a standard graphics calculator, to explore two-dimensional motion. (JRH)

Fourth International Workshop on Grid Simulator Testing of Wind Turbine

Science.gov Websites

, United Kingdom Smart Reconfiguration and Protection in Advanced Electric Distribution Grids - Mayank Capabilities in Kinectrics - Nicolas Wrathall, Kinectrics, Canada Discussion Day 2: April 26, 2017 Advanced Grid Emulation Methods Advanced PHIL Interface for Multi-MW Scale Inverter Testing - Przemyslaw

AN OVERVIEW OF THE INTEROPERABILITY ROADMAP FOR COM/.NET-BASED CAPE-OPEN

EPA Science Inventory

The CAPE-OPEN standard interfaces have been designed to permit flexibility and modularization of process simulation environments (PMEs) in order to use process modeling components such as unit operation or thermodynamic property models across a range of tolls employed in the life...

Electronic Properties of III-V Semiconductor Interfaces.

DTIC Science & Technology

1980-11-30

ONG . REPORT NUMBER S.B CONTRACT 0R GRANT NUMSERa) S. PERFORMING ORGANIZATION NAMIE AND ADDRESS 10. PROGRAM EL.EMIENT. PROJECT. TASK AREA G WORK UNIT...Fred Nedoluha, Dave Collins, Larry Mainers, Derek Lile, and Carl Zeisse. And several of the samples studied were supplied by industrial colleagues

The Utility of Handheld Programmable Calculators in Aircraft Life Cycle Cost Estimation.

DTIC Science & Technology

1982-09-01

are available for extended mem - ory, hardcopy printout, video interface, and special application software. Any calculator of comparable memory could...condi- tioning system. OG Total number of engine, air turbine motor (ATM) and auxiliary power unit (APU) driven generator/alternators. OHP Total number

Analysis of the interface and data transfer from ICU to normal wards in a German University Hospital.

PubMed

Vollmer, Anne-Maria; Skonetzki-Cheng, Stefan; Prokosch, Hans-Ulrich

2013-01-01

Typically general wards and intensive care units (ICU) have very different labor organizations, structures and IT-systems in Germany. There is a need for coordination, because of the different working arrangements. Our team investigated the interface between ICU and general ward and especially the respective information transfer in the University hospital in Erlangen (Bavaria, Germany). The research team used a combination of interviews, observations and the analysis of transfer records and forms as part of a methodical triangulation. We identified 41 topics, which are discussed or presented in writing during the handover. In a second step, we investigate the requirements of data transmission in expert interviews. A data transfer concept from the perspective of the nurses and physicians was developed and we formulated recommendations for improvements of process and communication for this interface. Finally the data transfer concept was evaluated by the respondents.

Effect of accelerated crucible rotation on melt composition in high-pressure vertical Bridgman growth of cadmium zinc telluride

NASA Astrophysics Data System (ADS)

Yeckel, Andrew; Derby, Jeffrey J.

2000-02-01

Three-dimensional axisymmetric, time-dependent simulations of the high-pressure vertical Bridgman growth of large-diameter cadmium zinc telluride are performed to study the effect of accelerated crucible rotation (ACRT) on crystal growth dynamics. The model includes details of heat transfer, melt convection, solid-liquid interface shape, and dilute zinc segregation. Application of ACRT greatly improves mixing in the melt, but causes an overall increased deflection of the solid-liquid interface. The flow exhibits a Taylor-Görtler instability at the crucible sidewall, which further enhances melt mixing. The rate of mixing depends strongly on the length of the ACRT cycle, with an optimum half-cycle length between 2 and 4 Ekman time units. Significant melting of the crystal occurs during a portion of the rotation cycle, caused by periodic reversal of the secondary flow at the solid-liquid interface, indicating the possibility of compositional striations.

Using Cloud Computing infrastructure with CloudBioLinux, CloudMan and Galaxy

PubMed Central

Afgan, Enis; Chapman, Brad; Jadan, Margita; Franke, Vedran; Taylor, James

2012-01-01

Cloud computing has revolutionized availability and access to computing and storage resources; making it possible to provision a large computational infrastructure with only a few clicks in a web browser. However, those resources are typically provided in the form of low-level infrastructure components that need to be procured and configured before use. In this protocol, we demonstrate how to utilize cloud computing resources to perform open-ended bioinformatics analyses, with fully automated management of the underlying cloud infrastructure. By combining three projects, CloudBioLinux, CloudMan, and Galaxy into a cohesive unit, we have enabled researchers to gain access to more than 100 preconfigured bioinformatics tools and gigabytes of reference genomes on top of the flexible cloud computing infrastructure. The protocol demonstrates how to setup the available infrastructure and how to use the tools via a graphical desktop interface, a parallel command line interface, and the web-based Galaxy interface. PMID:22700313

Modular, thermal bus-to-radiator integral heat exchanger design for Space Station Freedom

NASA Technical Reports Server (NTRS)

Chambliss, Joe; Ewert, Michael

1990-01-01

The baseline concept is introduced for the 'integral heat exchanger' (IHX) which is the interface of the two-phase thermal bus with the heat-rejecting radiator panels. A direct bus-to-radiator heat-pipe integral connection replaces the present interface hardware to reduce the weight and complexity of the heat-exchange mechanism. The IHX is presented in detail and compared to the baseline system assuming certain values for heat rejection, mass per unit width, condenser capacity, contact conductance, and assembly mass. The spreadsheet comparison can be used to examine a variety of parameters such as radiator length and configuration. The IHX is shown to permit the reduction of panel size and system mass in response to better conductance and packaging efficiency. The IHX is found to be a suitable heat-rejection system for the Space Station Freedom because it uses present technology and eliminates the interface mechanisms.

Designing a VMEbus FDDI adapter card

NASA Astrophysics Data System (ADS)

Venkataraman, Raman

1992-03-01

This paper presents a system architecture for a VMEbus FDDI adapter card containing a node core, FDDI block, frame buffer memory and system interface unit. Most of the functions of the PHY and MAC layers of FDDI are implemented with National's FDDI chip set and the SMT implementation is simplified with a low cost microcontroller. The factors that influence the system bus bandwidth utilization and FDDI bandwidth utilization are the data path and frame buffer memory architecture. The VRAM based frame buffer memory has two sections - - LLC frame memory and SMT frame memory. Each section with an independent serial access memory (SAM) port provides an independent access after the initial data transfer cycle on the main port and hence, the throughput is maximized on each port of the memory. The SAM port simplifies the system bus master DMA design and the VMEbus interface can be designed with low-cost off-the-shelf interface chips.

Man-machine interface for the control of a lunar transport machine

NASA Technical Reports Server (NTRS)

Ashley, Richard; Bacon, Loring; Carlton, Scott Tim; May, Mark; Moore, Jimmy; Peek, Dennis

1987-01-01

A proposed first generation human interface control panel is described which will be used to control SKITTER, a three-legged lunar walking machine. Under development at Georgia Tech, SKITTER will be a multi-purpose, un-manned vehicle capable of preparing a site for the proposed lunar base in advance of the arrival of men. This walking machine will be able to accept modular special purpose tools, such as a crane, a core sampling drill, and a digging device, among others. The project was concerned with the design of a human interface which could be used, from earth, to control the movements of SKITTER on the lunar surface. Preliminary inquiries were also made into necessary modifications required to adapt the panel to both a shirt-sleeve lunar environment and to a mobile unit which could be used by a man in a space suit at a lunar work site.

CAD Services: an Industry Standard Interface for Mechanical CAD Interoperability

NASA Technical Reports Server (NTRS)

Claus, Russell; Weitzer, Ilan

2002-01-01

Most organizations seek to design and develop new products in increasingly shorter time periods. At the same time, increased performance demands require a team-based multidisciplinary design process that may span several organizations. One approach to meet these demands is to use 'Geometry Centric' design. In this approach, design engineers team their efforts through one united representation of the design that is usually captured in a CAD system. Standards-based interfaces are critical to provide uniform, simple, distributed services that enable the 'Geometry Centric' design approach. This paper describes an industry-wide effort, under the Object Management Group's (OMG) Manufacturing Domain Task Force, to define interfaces that enable the interoperability of CAD, Computer Aided Manufacturing (CAM), and Computer Aided Engineering (CAE) tools. This critical link to enable 'Geometry Centric' design is called: Cad Services V1.0. This paper discusses the features of this standard and proposed application.

CAST: a new program package for the accurate characterization of large and flexible molecular systems.

PubMed

Grebner, Christoph; Becker, Johannes; Weber, Daniel; Bellinger, Daniel; Tafipolski, Maxim; Brückner, Charlotte; Engels, Bernd

2014-09-15

The presented program package, Conformational Analysis and Search Tool (CAST) allows the accurate treatment of large and flexible (macro) molecular systems. For the determination of thermally accessible minima CAST offers the newly developed TabuSearch algorithm, but algorithms such as Monte Carlo (MC), MC with minimization, and molecular dynamics are implemented as well. For the determination of reaction paths, CAST provides the PathOpt, the Nudge Elastic band, and the umbrella sampling approach. Access to free energies is possible through the free energy perturbation approach. Along with a number of standard force fields, a newly developed symmetry-adapted perturbation theory-based force field is included. Semiempirical computations are possible through DFTB+ and MOPAC interfaces. For calculations based on density functional theory, a Message Passing Interface (MPI) interface to the Graphics Processing Unit (GPU)-accelerated TeraChem program is available. The program is available on request. Copyright © 2014 Wiley Periodicals, Inc.

Band transition and topological interface modes in 1D elastic phononic crystals.

PubMed

Yin, Jianfei; Ruzzene, Massimo; Wen, Jihong; Yu, Dianlong; Cai, Li; Yue, Linfeng

2018-05-01

In this report, we design a one-dimensional elastic phononic crystal (PC) comprised of an Aluminum beam with periodically arranged cross-sections to study the inversion of bulk bands due to the change of topological phases. As the geometric parameters of the unit cell varies, the second bulk band closes and reopens forming a topological transition point. This phenomenon is confirmed for both longitudinal waves and bending waves. By constructing a structural system formed by two PCs with different topological phases, for the first time, we experimentally demonstrate the existence of interface mode within the bulk band gap as a result of topological transition for both longitudinal and bending modes in elastic systems, although for bending modes, additional conditions have to be met in order to have the interface mode due to the dispersive nature of the bending waves in uniform media compared to the longitudinal waves.

Multistage Magnetic Separator of Cells and Proteins

NASA Technical Reports Server (NTRS)

Barton, Ken; Ainsworth, Mark; Daily, Bruce; Dunn, Scott; Metz, Bill; Vellinger, John; Taylor, Brock; Meador, Bruce

2005-01-01

The multistage electromagnetic separator for purifying cells and magnetic particles (MAGSEP) is a laboratory apparatus for separating and/or purifying particles (especially biological cells) on the basis of their magnetic susceptibility and magnetophoretic mobility. Whereas a typical prior apparatus based on similar principles offers only a single stage of separation, the MAGSEP, as its full name indicates, offers multiple stages of separation; this makes it possible to refine a sample population of particles to a higher level of purity or to categorize multiple portions of the sample on the basis of magnetic susceptibility and/or magnetophoretic mobility. The MAGSEP includes a processing unit and an electronic unit coupled to a personal computer. The processing unit includes upper and lower plates, a plate-rotation system, an electromagnet, an electromagnet-translation system, and a capture-magnet assembly. The plates are bolted together through a roller bearing that allows the plates to rotate with respect to each other. An interface between the plates acts as a seal for separating fluids. A lower cuvette can be aligned with as many as 15 upper cuvette stations for fraction collection during processing. A two-phase stepping motor drives the rotation system, causing the upper plate to rotate for the collection of each fraction of the sample material. The electromagnet generates a magnetic field across the lower cuvette, while the translation system translates the electromagnet upward along the lower cuvette. The current supplied to the electromagnet, and thus the magnetic flux density at the pole face of the electromagnet, can be set at a programmed value between 0 and 1,400 gauss (0.14 T). The rate of translation can be programmed between 5 and 2,000 m/s so as to align all sample particles in the same position in the cuvette. The capture magnet can be a permanent magnet. It is mounted on an arm connected to a stepping motor. The stepping motor rotates the arm to position the capture magnet above the upper cuvette into which a fraction of the sample is collected. The electronic unit includes a power switch, power-supply circuitry that accepts 110-Vac input power, an RS-232 interface, and status lights. The personal computer runs the MAGSEP software and controls the operation of the MAGSEP through the RS-232 interface. The status of the power, the translating electromagnet, the capture magnet, and the rotation of the upper plate are indicated in a graphical user interface on the computer screen.

Factors affecting physicians' use of a dedicated overview interface in an electronic health record: The importance of standard information and standard documentation.

PubMed

Jensen, Lotte Groth; Bossen, Claus

2016-03-01

It remains a continual challenge to present information in user interfaces in large IT systems to support overview in the best possible way. We here examine how an electronic health record (EHR) supports the creation of overview among hospital physicians with a particular focus on the use of an interface designed to provide clinicians with a patient information overview. The overview interface integrates information flexibly from diverse places in the EHR and presents this information in one screen display. Our study revealed widespread non-use of the overview interface. We explore the reasons for its use and non-use. We conducted exploratory ethnographic fieldwork among physicians in two hospitals and gathered statistical data on their use of the overview interface. From the quantitative data, we identified where the interface was used most and conducted 18 semi-structured, open-ended interviews framed by the theoretical framework and the findings of the initial ethnographic fieldwork. We interviewed both physicians and employees from the IT units in different hospitals. We then analysed notes from the ethnographic fieldwork and the interviews and ordered these into themes forming the basis for the presentation of findings. The overview interface was most used in departments or situations where the problem at hand and the need for information could be standardized-in particular, in anesthesiological departments and outpatient clinics. However, departments with complex and long patient histories did not make much use of the overview interface. Design and layout were not mentioned as decisive factors affecting its use or non-use. Many physicians questioned the completeness of data in the overview interface-either because they were skeptical about the hospital's or the department's documentation practices, or because they could not recognize the structure of the interface. This uncertainty discouraged physicians from using the overview interface. Dedicating a specific function or interface to supporting overview works best where information needs can be standardized. The narrative and contextual nature of creating clinical overview is unlikely to be optimally supported by using the overview interface alone. The use of these kinds of interfaces requires trust in data completeness and other clinicians' and administrative staff's documentation practices, as well as an understanding of the underlying structure of the EHR and how information is filtered when data are aggregated for the interface. Copyright © 2015. Published by Elsevier Ireland Ltd.

Fundamentals of lateral and vertical heterojunctions of atomically thin materials.

PubMed

Pant, Anupum; Mutlu, Zafer; Wickramaratne, Darshana; Cai, Hui; Lake, Roger K; Ozkan, Cengiz; Tongay, Sefaattin

2016-02-21

At the turn of this century, Herbert Kroemer, the 2000 Nobel Prize winner in Physics, famously commented that "the interface is the device". This statement has since opened up unparalleled opportunities at the interface of conventional three-dimensional (3D) materials (H. Kroemer, Quasi-Electric and Quasi-Magnetic Fields in Non-Uniform Semiconductors, RCA Rev., 1957, 18, 332-342). More than a decade later, Sir Andre Geim and Irina Grigorieva presented their views on 2D heterojunctions which further cultivated broad interests in the 2D materials field. Currently, advances in two-dimensional (2D) materials enable us to deposit layered materials that are only one or few unit-cells in thickness to construct sharp in-plane and out-of-plane interfaces between dissimilar materials, and to be able to fabricate novel devices using these cutting-edge techniques. The interface alone, which traditionally dominated overall device performance, thus has now become the device itself. Fueled by recent progress in atomically thin materials, we are now at the ultimate limit of interface physics, which brings to us new and exciting opportunities, with equally demanding challenges. This paper endeavors to provide stalwarts and newcomers a perspective on recent advances in synthesis, fundamentals, applications, and future prospects of a large variety of heterojunctions of atomically thin materials.

An SSVEP-Based Brain-Computer Interface for Text Spelling With Adaptive Queries That Maximize Information Gain Rates.

PubMed

Akce, Abdullah; Norton, James J S; Bretl, Timothy

2015-09-01

This paper presents a brain-computer interface for text entry using steady-state visually evoked potentials (SSVEP). Like other SSVEP-based spellers, ours identifies the desired input character by posing questions (or queries) to users through a visual interface. Each query defines a mapping from possible characters to steady-state stimuli. The user responds by attending to one of these stimuli. Unlike other SSVEP-based spellers, ours chooses from a much larger pool of possible queries-on the order of ten thousand instead of ten. The larger query pool allows our speller to adapt more effectively to the inherent structure of what is being typed and to the input performance of the user, both of which make certain queries provide more information than others. In particular, our speller chooses queries from this pool that maximize the amount of information to be received per unit of time, a measure of mutual information that we call information gain rate. To validate our interface, we compared it with two other state-of-the-art SSVEP-based spellers, which were re-implemented to use the same input mechanism. Results showed that our interface, with the larger query pool, allowed users to spell multiple-word texts nearly twice as fast as they could with the compared spellers.

Strain induced atomic structure at the Ir-doped LaAlO3/SrTiO3 interface.

PubMed

Lee, M; Arras, R; Warot-Fonrose, B; Hungria, T; Lippmaa, M; Daimon, H; Casanove, M J

2017-11-01

The structure of Ir-doped LaAlO 3 /SrTiO 3 (001) interfaces was investigated on the atomic scale using probe-corrected transmission electron microscopy in high-angle annular dark-field scanning mode (HAADF-STEM) and electron energy loss spectroscopy (EELS), combined with first-principles calculations. We report the evolution of the strain state experimentally measured in a 5 unit-cell thick LaAlO 3 film as a function of the Ir concentration in the topmost SrTiO 3 layer. It is shown that the LaAlO 3 layers remain fully elastically strained up to 3% of Ir doping, whereas a higher doping level seems to promote strain relaxation through enhanced cationic interdiffusion. The observed differences between the energy loss near edge structure (ELNES) of Ti-L 2,3 and O-K edges at non-doped and Ir-doped interfaces are consistent with the location of the Ir dopants at the interface, up to 3% of Ir doping. These findings, supported by the results of density functional theory (DFT) calculations, provide strong evidence that the effect of dopant concentrations on the properties of this kind of interface should not be analyzed without obtaining essential information from the fine structural and chemical analysis of the grown structures.

Effect of alignment perturbations in a trans-tibial prosthesis user: A pilot study.

PubMed

Courtney, Anna; Orendurff, Michael S; Buis, Arjan

2016-04-01

A recurring complication in trans-tibial prosthetic limb users is "poor socket fit" with painful residuum-socket interfaces, a consequence of excess pressure. This is due to both poor socket fit and poor socket alignment; however, the interaction of these factors has not been quantified. Through evaluation of kinetic data this study aimed to articulate an interaction uniting socket design, alignment and interface pressures. The results will help to refine future studies and will hopefully help determine whether sockets can be designed, fitted and aligned to maximize mobility whilst minimizing injurious forces. Interface pressures were recorded throughout ambulation in one user with "optimal (reference) alignment" followed by 5 malalignments in a patellar tendon-bearing and a hydrocast socket. Marked differences in pressure distribution were discovered when equating the patellar tendon-bearing against the hydrocast socket and when comparing interface pressures from reference with offset alignment. Patellar tendon-bearing sockets were found to be more sensitive to alignment perturbations than hydrocast sockets. A complex interaction was found, with the most prominent finding demonstrating the requisite for attainment of optimal alignment: a translational alignment error of 10 mm can increase maximum peak pressures by 227% (mean 17.5%). Refinements for future trials are described and the necessity for future research into socket design, alignment and interface pressures has been estabilished.

Hillslope characterization in terms of geophysical units based on the joint interpretation of electrical resistivity and seismic velocity data

NASA Astrophysics Data System (ADS)

Feskova, Tatiana; Dietrich, Peter

2015-04-01

Hydrological conditions in a catchment depend on many factors such as climatic, geological, geomorphological, biological and human, which interact with each other and influence water balance in a catchment. This interaction leads to the subordination in the landscape structure, namely the weak elements subordinate to the powerful elements. Thereby, geological and geomorphological factors play an essential role in catchment development and organization. A hillslope consequently can be allocated to one class of the representative units because the important flow processes run at the hillslope. Moreover, a hillslope can be subdivided into stratigraphic subsurface units and significant hillslope areas based on the lithological change of contrasting interfaces. The knowledge of subsurface structures is necessary to understand and predicate complex hydrological processes in a catchment. Geophysical techniques provide a good opportunity to explore the subsurface. A complete geophysical investigation of subsurface in a catchment with difficult environmental conditions never will be achieved because of large time effort in the field, equipment logistic, and ambiguity in the data interpretation. The case study demonstrates how a catchment can be investigated using geophysical methods in an effective manner in terms of characterization of representative units with respect to a functional role in the catchment. This case study aims to develop combined resistivity and seismic velocity hillslope subsurface models for the distinction of representative functional units. In order to identify the contrasting interfaces of the hillslope, to localize significant hillslope areas, and to address the ambiguity in the geophysical data interpretation, the case study combined resistivity surveys (vertical electrical soundings and electrical resistivity tomography) with refraction seismic method, and conducted these measurements at one single profile along the hillslope transect and perpendicular to this transect. The measurements along the hillslope transect deliver the two-dimensional hillslope section of resistivity and seismic velocity distribution with contrasting stratigraphic interfaces, whereas the measurements perpendicular to the hillslope transect obtained from vertical electrical soundings survey localize significant hillslope areas indicating existence of two-dimensional features in the subsurface. To demonstrate the suitability of the suggested approach, resistivity and refraction seismic measurements were carried out at the forested gently inclined hillslope in the Weierbach catchment, which belongs to the hydrological observatory Attert Basin locating in the mid-western part of the Grand-Duchy of Luxembourg. This hillslope is characterized by Pleistocene periglacial slope deposits, which plays an important role in the ecosystem functioning. The obtained resistivity and seismic hillslope models of the Weierbech catchment complement well one another. The hillslope models identify three significant hillslope areas along the hillslope called as elementary functional units, and four electrical vertical stratigraphic units and two seismic vertical stratigraphic units that agree with lithological stratigraphy of this study site. In conclusions, the suggested geophysical approach is suitable to characterise a hillslope as the representative unit only at a single transect in the efficient manner in contrast to the expensive 3D-measurements.

ESA Atmospheric Toolbox

NASA Astrophysics Data System (ADS)

Niemeijer, Sander

2017-04-01

The ESA Atmospheric Toolbox (BEAT) is one of the ESA Sentinel Toolboxes. It consists of a set of software components to read, analyze, and visualize a wide range of atmospheric data products. In addition to the upcoming Sentinel-5P mission it supports a wide range of other atmospheric data products, including those of previous ESA missions, ESA Third Party missions, Copernicus Atmosphere Monitoring Service (CAMS), ground based data, etc. The toolbox consists of three main components that are called CODA, HARP and VISAN. CODA provides interfaces for direct reading of data from earth observation data files. These interfaces consist of command line applications, libraries, direct interfaces to scientific applications (IDL and MATLAB), and direct interfaces to programming languages (C, Fortran, Python, and Java). CODA provides a single interface to access data in a wide variety of data formats, including ASCII, binary, XML, netCDF, HDF4, HDF5, CDF, GRIB, RINEX, and SP3. HARP is a toolkit for reading, processing and inter-comparing satellite remote sensing data, model data, in-situ data, and ground based remote sensing data. The main goal of HARP is to assist in the inter-comparison of datasets. By appropriately chaining calls to HARP command line tools one can pre-process datasets such that two datasets that need to be compared end up having the same temporal/spatial grid, same data format/structure, and same physical unit. The toolkit comes with its own data format conventions, the HARP format, which is based on netcdf/HDF. Ingestion routines (based on CODA) allow conversion from a wide variety of atmospheric data products to this common format. In addition, the toolbox provides a wide range of operations to perform conversions on the data such as unit conversions, quantity conversions (e.g. number density to volume mixing ratios), regridding, vertical smoothing using averaging kernels, collocation of two datasets, etc. VISAN is a cross-platform visualization and analysis application for atmospheric data and can be used to visualize and analyze the data that you retrieve using the CODA and HARP interfaces. The application uses the Python language as the means through which you provide commands to the application. The Python interfaces for CODA and HARP are included so you can directly ingest product data from within VISAN. Powerful visualization functionality for 2D plots and geographical plots in VISAN will allow you to directly visualize the ingested data. All components from the ESA Atmospheric Toolbox are Open Source and freely available. Software packages can be downloaded from the BEAT website: http://stcorp.nl/beat/

Chronic monitoring of lower urinary tract activity via a sacral dorsal root ganglia interface

NASA Astrophysics Data System (ADS)

Khurram, Abeer; Ross, Shani E.; Sperry, Zachariah J.; Ouyang, Aileen; Stephan, Christopher; Jiman, Ahmad A.; Bruns, Tim M.

2017-06-01

Objective. Our goal is to develop an interface that integrates chronic monitoring of lower urinary tract (LUT) activity with stimulation of peripheral pathways. Approach. Penetrating microelectrodes were implanted in sacral dorsal root ganglia (DRG) of adult male felines. Peripheral electrodes were placed on or in the pudendal nerve, bladder neck and near the external urethral sphincter. Supra-pubic bladder catheters were implanted for saline infusion and pressure monitoring. Electrode and catheter leads were enclosed in an external housing on the back. Neural signals from microelectrodes and bladder pressure of sedated or awake-behaving felines were recorded under various test conditions in weekly sessions. Electrodes were also stimulated to drive activity. Main results. LUT single- and multi-unit activity was recorded for 4-11 weeks in four felines. As many as 18 unique bladder pressure single-units were identified in each experiment. Some channels consistently recorded bladder afferent activity for up to 41 d, and we tracked individual single-units for up to 23 d continuously. Distension-evoked and stimulation-driven (DRG and pudendal) bladder emptying was observed, during which LUT sensory activity was recorded. Significance. This chronic implant animal model allows for behavioral studies of LUT neurophysiology and will allow for continued development of a closed-loop neuroprosthesis for bladder control.

The universal toolbox thermal imager

NASA Astrophysics Data System (ADS)

Hollock, Steve; Jones, Graham; Usowicz, Paul

2003-09-01

The Introduction of Microsoft Pocket PC 2000/2002 has seen a standardisation of the operating systems used by the majority of PDA manufacturers. This, coupled with the recent price reductions associated with these devices, has led to a rapid increase in the sales of such units; their use is now common in industrial, commercial and domestic applications throughout the world. This paper describes the results of a programme to develop a thermal imager that will interface directly to all of these units so as to take advantage of the existing and future installed base of such devices. The imager currently interfaces with virtually any Pocket PC which provides the necessary processing, display and storage capability; as an alternative, the output of the unit can be visualised and processed in real time using a PC or laptop computer. In future, the open architecture employed by this imager will allow it to support all mobile computing devices, including phones and PDAs. The imager has been designed for one-handed or two-handed operation so that it may be pointed at awkward angles or used in confined spaces; this flexibility of use coupled with the extensive feature range and exceedingly low-cost of the imager, is extending the marketplace for thermal imaging from military and professional, through industrial to the commercial and domestic marketplaces.

High-performance dual-speed CCD camera system for scientific imaging

NASA Astrophysics Data System (ADS)

Simpson, Raymond W.

1996-03-01

Traditionally, scientific camera systems were partitioned with a `camera head' containing the CCD and its support circuitry and a camera controller, which provided analog to digital conversion, timing, control, computer interfacing, and power. A new, unitized high performance scientific CCD camera with dual speed readout at 1 X 106 or 5 X 106 pixels per second, 12 bit digital gray scale, high performance thermoelectric cooling, and built in composite video output is described. This camera provides all digital, analog, and cooling functions in a single compact unit. The new system incorporates the A/C converter, timing, control and computer interfacing in the camera, with the power supply remaining a separate remote unit. A 100 Mbyte/second serial link transfers data over copper or fiber media to a variety of host computers, including Sun, SGI, SCSI, PCI, EISA, and Apple Macintosh. Having all the digital and analog functions in the camera made it possible to modify this system for the Woods Hole Oceanographic Institution for use on a remote controlled submersible vehicle. The oceanographic version achieves 16 bit dynamic range at 1.5 X 105 pixels/second, can be operated at depths of 3 kilometers, and transfers data to the surface via a real time fiber optic link.

Addressing hypertext design and conversion issues

NASA Technical Reports Server (NTRS)

Glusko, Robert J.

1990-01-01

Hypertext is a network of information units connected by relational links. A hypertext system is a configuration of hardware and software that presents a hypertext to users and allows them to manage and access the information that it contains. Hypertext is also a user interface concept that closely supports the ways that people use printed information. Hypertext concepts encourage modularity and the elimination of redundancy in data bases because information can be stored only once but viewed in any appropriate context. Hypertext is such a hot idea because it is an enabling technology in that workstations and personal computers finally provide enough local processing power for hypertext user interfaces.

The coherent interlayer resistance of a single, rotated interface between two stacks of AB graphite

NASA Astrophysics Data System (ADS)

Habib, K. M. Masum; Sylvia, Somaia S.; Ge, Supeng; Neupane, Mahesh; Lake, Roger K.

2013-12-01

The coherent, interlayer resistance of a misoriented, rotated interface between two stacks of AB graphite is determined for a variety of misorientation angles. The quantum-resistance of the ideal AB stack is on the order of 1 to 10 mΩ μm2. For small rotation angles, the coherent interlayer resistance exponentially approaches the ideal quantum resistance at energies away from the charge neutrality point. Over a range of intermediate angles, the resistance increases exponentially with cell size for minimum size unit cells. Larger cell sizes, of similar angles, may not follow this trend. The energy dependence of the interlayer transmission is described.

Automatic control of a primary electric thrust subsystem

NASA Technical Reports Server (NTRS)

Macie, T. W.; Macmedan, M. L.

1975-01-01

A concept for automatic control of the thrust subsystem has been developed by JPL and participating NASA Centers. This paper reports on progress in implementing the concept at JPL. Control of the Thrust Subsystem (TSS) is performed by the spacecraft computer command subsystem, and telemetry data is extracted by the spacecraft flight data subsystem. The Data and Control Interface Unit, an element of the TSS, provides the interface with the individual elements of the TSS. The control philosophy and implementation guidelines are presented. Control requirements are listed, and the control mechanism, including the serial digital data intercommunication system, is outlined. The paper summarizes progress to Fall 1974.