Comparison of the temperature accuracy between smart phone based and high-end thermal cameras using a temperature gradient phantom

NASA Astrophysics Data System (ADS)

Klaessens, John H.; van der Veen, Albert; Verdaasdonk, Rudolf M.

2017-03-01

Recently, low cost smart phone based thermal cameras are being considered to be used in a clinical setting for monitoring physiological temperature responses such as: body temperature change, local inflammations, perfusion changes or (burn) wound healing. These thermal cameras contain uncooled micro-bolometers with an internal calibration check and have a temperature resolution of 0.1 degree. For clinical applications a fast quality measurement before use is required (absolute temperature check) and quality control (stability, repeatability, absolute temperature, absolute temperature differences) should be performed regularly. Therefore, a calibrated temperature phantom has been developed based on thermistor heating on both ends of a black coated metal strip to create a controllable temperature gradient from room temperature 26 °C up to 100 °C. The absolute temperatures on the strip are determined with software controlled 5 PT-1000 sensors using lookup tables. In this study 3 FLIR-ONE cameras and one high end camera were checked with this temperature phantom. The results show a relative good agreement between both low-cost and high-end camera's and the phantom temperature gradient, with temperature differences of 1 degree up to 6 degrees between the camera's and the phantom. The measurements were repeated as to absolute temperature and temperature stability over the sensor area. Both low-cost and high-end thermal cameras measured relative temperature changes with high accuracy and absolute temperatures with constant deviations. Low-cost smart phone based thermal cameras can be a good alternative to high-end thermal cameras for routine clinical measurements, appropriate to the research question, providing regular calibration checks for quality control.

Reduction of image-based ADI-to-AEI overlay inconsistency with improved algorithm

NASA Astrophysics Data System (ADS)

Chen, Yen-Liang; Lin, Shu-Hong; Chen, Kai-Hsiung; Ke, Chih-Ming; Gau, Tsai-Sheng

2013-04-01

In image-based overlay (IBO) measurement, the measurement quality of various measurement spectra can be judged by quality indicators and also the ADI-to-AEI similarity to determine the optimum light spectrum. However we found some IBO measured results showing erroneous indication of wafer expansion from the difference between the ADI and the AEI maps, even after their measurement spectra were optimized. To reduce this inconsistency, an improved image calculation algorithm is proposed in this paper. Different gray levels composed of inner- and outer-box contours are extracted to calculate their ADI overlay errors. The symmetry of intensity distribution at the thresholds dictated by a range of gray levels is used to determine the particular gray level that can minimize the ADI-to-AEI overlay inconsistency. After this improvement, the ADI is more similar to AEI with less expansion difference. The same wafer was also checked by the diffraction-based overlay (DBO) tool to verify that there is no physical wafer expansion. When there is actual wafer expansion induced by large internal stress, both the IBO and the DBO measurements indicate similar expansion results. The scanning white-light interference microscope was used to check the variation of wafer warpage during the ADI and AEI stages. It predicts a similar trend with the overlay difference map, confirming the internal stress.

76 FR 64785 - Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-19

...--Internal, of Chapter 5, Time Limits Maintenance Checks, of EMBRAER EMB145 Aircraft Maintenance Manual, Part...--Tail Cone Fairing--Internal, of Chapter 5, Time Limits Maintenance Checks, of EMBRAER EMB145 Aircraft... Maintenance Checks, of EMBRAER EMB145 Aircraft Maintenance Manual, Part II, AMM-145/1124, Revision 54, dated...

White light emitting diode as potential replacement of tungsten-halogen lamp for visible spectroscopy system: a case study in the measurement of mango qualities

NASA Astrophysics Data System (ADS)

Chiong, W. L.; Omar, A. F.

2017-07-01

Non-destructive technique based on visible (VIS) spectroscopy using light emitting diode (LED) as lighting was used for evaluation of the internal quality of mango fruit. The objective of this study was to investigate feasibility of white LED as lighting in spectroscopic instrumentation to predict the acidity and soluble solids content of intact Sala Mango. The reflectance spectra of the mango samples were obtained and measured in the visible range (400-700 nm) using VIS spectroscopy illuminated under different white LEDs and tungsten-halogen lamp (pro lamp). Regression models were developed by multiple linear regression to establish the relationship between spectra and internal quality. Direct calibration transfer procedure was then applied between master and slave lighting to check on the acidity prediction results after transfer. Determination of mango acidity under white LED lighting was successfully performed through VIS spectroscopy using multiple linear regression but otherwise for soluble solids content. Satisfactory results were obtained for calibration transfer between LEDs with different correlated colour temperature indicated this technique was successfully used in spectroscopy measurement between two similar light sources in prediction of internal quality of mango.

26 CFR 301.6311-1 - Payment by check or money order.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 26 Internal Revenue 18 2013-04-01 2013-04-01 false Payment by check or money order. 301.6311-1... by check or money order. (a) Authority to receive—(1) In general. (i) District directors, Service... District of Columbia, or any possession of the United States, or money orders in payment for internal...

26 CFR 301.6311-1 - Payment by check or money order.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 18 2011-04-01 2011-04-01 false Payment by check or money order. 301.6311-1... by check or money order. (a) Authority to receive—(1) In general. (i) District directors, Service... District of Columbia, or any possession of the United States, or money orders in payment for internal...

26 CFR 301.6311-1 - Payment by check or money order.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 26 Internal Revenue 18 2014-04-01 2014-04-01 false Payment by check or money order. 301.6311-1... by check or money order. (a) Authority to receive—(1) In general. (i) District directors, Service... District of Columbia, or any possession of the United States, or money orders in payment for internal...

26 CFR 301.6311-1 - Payment by check or money order.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 26 Internal Revenue 18 2012-04-01 2012-04-01 false Payment by check or money order. 301.6311-1... by check or money order. (a) Authority to receive—(1) In general. (i) District directors, Service... District of Columbia, or any possession of the United States, or money orders in payment for internal...

Checking the possibility of controlling fuel element by X-ray computerized tomography

NASA Astrophysics Data System (ADS)

Trinh, V. B.; Zhong, Y.; Osipov, S. P.; Batranin, A. V.

2017-08-01

The article considers the possibility of checking fuel elements by X-ray computerized tomography. The checking tasks are based on the detection of particles of active material, evaluation of the heterogeneity of the distribution of uranium salts and the detection of clusters of uranium particles. First of all, scheme of scanning improve the performance and quality of the resulting three-dimensional images of the internal structure is determined. Further, the possibility of detecting clusters of uranium particles having the size of 1 mm3 and measuring the coordinates of clusters of uranium particles in the middle layer with the accuracy of within a voxel size (for the considered experiments of about 80 μm) is experimentally proved in the main part. The problem of estimating the heterogeneity of the distribution of the active material in the middle layer and the detection of particles of active material with a nominal diameter of 0.1 mm in the “blank” is solved.

Evaluation of Check in/Check out for Students with Internalizing Behavior Problems

ERIC Educational Resources Information Center

Hunter, Katherine K.; Chenier, Jeffrey S.; Gresham, Frank M.

2014-01-01

Internalizing behaviors are directed inward toward the child and are frequently overlooked in classrooms compared with externalizing behaviors. When internalizing behaviors are identified, cognitive-behavioral interventions (CBIs) are typically the intervention of choice; however, CBIs are time-consuming and require considerable skill and…

Quality of Type II Diabetes Care in Primary Health Care Centers in Kuwait: Employment of a Diabetes Quality Indicator Set (DQIS).

PubMed

Badawi, Dalia; Saleh, Shadi; Natafgi, Nabil; Mourad, Yara; Behbehani, Kazem

2015-01-01

Diabetes Mellitus is one of the major public health challenges, affecting more than 347 million adults worldwide. The impact of diabetes necessitates assessing the quality of care received by people with diabetes, especially in countries with a significant diabetes burden such as Kuwait. This paper aimed at piloting an approach for measuring Type II diabetes care performance through the use of a diabetes quality indicator set (DQIS) in primary health care. The DQIS for Kuwait was adapted from that developed by the National Diabetes Quality Improvement Alliance and the International Diabetes Federation. Five key care domains/measures were employed: (1) Blood glucose level measurement, (2) Cholesterol level measurement, (3) Blood pressure measurement, (4) Kidney function testing and (5) Smoking status check. The sample included the four major primary health care centers with the highest case load in Kuwait City, 4,241 patients in 2012 and 3,211 in 2010. Findings revealed the applicability and utility of employing performance indicators for diabetes care in Kuwait. Furthermore, findings revealed that many of the primary health care centers have achieved noteworthy improvement in diabetes care between 2010 and 2012, with the exception of smoking status check. The DQIS can help policymakers identify performance gaps and investigate key system roadblocks related to diabetes care in Kuwait.

NHEXAS PHASE I ARIZONA STUDY--STANDARD OPERATING PROCEDURE FOR FORM QA/QC CHECKS (UA-C-2.0)

EPA Science Inventory

The purpose of this SOP is to outline the process of Field Quality Assurance and Quality Control checks. This procedure was followed to ensure consistent data retrieval during the Arizona NHEXAS project and the "Border" study. Keywords: custody; QA/QC; field checks.

The Nation...

Methods for Geometric Data Validation of 3d City Models

NASA Astrophysics Data System (ADS)

Wagner, D.; Alam, N.; Wewetzer, M.; Pries, M.; Coors, V.

2015-12-01

Geometric quality of 3D city models is crucial for data analysis and simulation tasks, which are part of modern applications of the data (e.g. potential heating energy consumption of city quarters, solar potential, etc.). Geometric quality in these contexts is however a different concept as it is for 2D maps. In the latter case, aspects such as positional or temporal accuracy and correctness represent typical quality metrics of the data. They are defined in ISO 19157 and should be mentioned as part of the metadata. 3D data has a far wider range of aspects which influence their quality, plus the idea of quality itself is application dependent. Thus, concepts for definition of quality are needed, including methods to validate these definitions. Quality on this sense means internal validation and detection of inconsistent or wrong geometry according to a predefined set of rules. A useful starting point would be to have correct geometry in accordance with ISO 19107. A valid solid should consist of planar faces which touch their neighbours exclusively in defined corner points and edges. No gaps between them are allowed, and the whole feature must be 2-manifold. In this paper, we present methods to validate common geometric requirements for building geometry. Different checks based on several algorithms have been implemented to validate a set of rules derived from the solid definition mentioned above (e.g. water tightness of the solid or planarity of its polygons), as they were developed for the software tool CityDoctor. The method of each check is specified, with a special focus on the discussion of tolerance values where they are necessary. The checks include polygon level checks to validate the correctness of each polygon, i.e. closeness of the bounding linear ring and planarity. On the solid level, which is only validated if the polygons have passed validation, correct polygon orientation is checked, after self-intersections outside of defined corner points and edges are detected, among additional criteria. Self-intersection might lead to different results, e.g. intersection points, lines or areas. Depending on the geometric constellation, they might represent gaps between bounding polygons of the solids, overlaps, or violations of the 2-manifoldness. Not least due to the floating point problem in digital numbers, tolerances must be considered in some algorithms, e.g. planarity and solid self-intersection. Effects of different tolerance values and their handling is discussed; recommendations for suitable values are given. The goal of the paper is to give a clear understanding of geometric validation in the context of 3D city models. This should also enable the data holder to get a better comprehension of the validation results and their consequences on the deployment fields of the validated data set.

Software for improving the quality of project management, a case study: international manufacture of electrical equipment

NASA Astrophysics Data System (ADS)

Preradović, D. M.; Mićić, Lj S.; Barz, C.

2017-05-01

Production conditions in today’s world require software support at every stage of production and development of new products, for quality assurance and compliance with ISO standards. In addition to ISO standards such as usual metrics of quality, companies today are focused on other optional standards, such as CMMI (Capability Maturity Model Integrated) or prescribing they own standards. However, while there is intensive progress being made in the PM (project management), there is still a significant number of projects, at the global level, that are failures. These have failed to achieve their goals, within budget or timeframe. This paper focuses on checking the role of software tools through the rate of success in projects implemented in the case of internationally manufactured electrical equipment. The results of this research show the level of contribution of the project management software used to manage and develop new products to improve PM processes and PM functions, and how selection of the software tools affects the quality of PM processes and successfully completed projects.

[Goals, possibilities and limits of quality evaluation of guidelines. A background report on the user manual of the "Methodological Quality of Guidelines" check list].

PubMed

Helou, A; Ollenschläger, G

1998-06-01

Recently a German appraisal instrument for clinical guidelines was published that could be used by various parties in formal evaluation of guidelines. An user's guide to the appraisal instrument was designed that contains a detailed explanation for each question to ensure that the instrument is interpreted consistently. This paper describes the purposes, format and contents of the user's guide, and reviews the key factors influencing the validity of guidelines. Taking into account international experiences, the purposes, chances and methodological limitations of a prospective assessment of clinical practice guidelines are discussed.

77 FR 38714 - Proposed Collection; Comment Request for the TE/GE Compliance Check Questionnaires

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-28

... TE/GE Compliance Check Questionnaires AGENCY: Internal Revenue Service (IRS), Treasury. ACTION..., the IRS is soliciting comments concerning the TE/GE Compliance Check Questionnaires. DATES: Written... [email protected] . SUPPLEMENTARY INFORMATION: Title: TE/GE Compliance Check Questionnaires. OMB...

75 FR 47895 - Proposed Collection; Comment Request for Form 13818-The Limited Payability Claim Against the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-09

... 13818--The Limited Payability Claim Against the United States For Proceeds of An Internal Revenue Refund... Limited Payability Claim Against the United States For Proceeds of An Internal Revenue Refund Check. DATES... Against the United States For Proceeds of An Internal Revenue Refund Check. OMB Number: 1545-2024. Form...

Generation and use of observational data patterns in the evaluation of data quality for AmeriFlux and FLUXNET

NASA Astrophysics Data System (ADS)

Pastorello, G.; Agarwal, D.; Poindexter, C.; Papale, D.; Trotta, C.; Ribeca, A.; Canfora, E.; Faybishenko, B.; Gunter, D.; Chu, H.

2015-12-01

The fluxes-measuring sites that are part of AmeriFlux are operated and maintained in a fairly independent fashion, both in terms of scientific goals and operational practices. This is also the case for most sites from other networks in FLUXNET. This independence leads to a degree of heterogeneity in the data sets collected at the sites, which is also reflected in data quality levels. The generation of derived data products and data synthesis efforts, two of the main goals of these networks, are directly affected by the heterogeneity in data quality. In a collaborative effort between AmeriFlux and ICOS, a series of quality checks are being conducted for the data sets before any network-level data processing and product generation take place. From these checks, a set of common data issues were identified, and are being cataloged and classified into data quality patterns. These patterns are now being used as a basis for implementing automation for certain data quality checks, speeding up the process of applying the checks and evaluating the data. Currently, most data checks are performed individually in each data set, requiring visual inspection and inputs from a data curator. This manual process makes it difficult to scale the quality checks, creating a bottleneck for the data processing. One goal of the automated checks is to free up time of data curators so they can focus on new or less common issues. As new issues are identified, they can also be cataloged and classified, extending the coverage of existing patterns or potentially generating new patterns, helping both improve existing automated checks and create new ones. This approach is helping make data quality evaluation faster, more systematic, and reproducible. Furthermore, these patterns are also helping with documenting common causes and solutions for data problems. This can help tower teams with diagnosing problems in data collection and processing, and also in correcting historical data sets. In this presentation, using AmeriFlux fluxes and micrometeorological data, we discuss our approach to creating observational data patterns, and how we are using them to implement new automated checks. We also detail examples of these observational data patterns, illustrating how they are being used.

78 FR 63565 - Proposed Collection; Comment Request for the TE/GE Compliance Check Questionnaires

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-24

... TE/GE Compliance Check Questionnaires AGENCY: Internal Revenue Service (IRS), Treasury. ACTION..., the IRS is soliciting comments concerning the TE/GE Compliance Check Questionnaires. DATES: Written... . SUPPLEMENTARY INFORMATION: Title: TE/GE Compliance Check Questionnaires. OMB Number: 1545-2071. Form Number: Not...

The use of self checks and voting in software error detection - An empirical study

NASA Technical Reports Server (NTRS)

Leveson, Nancy G.; Cha, Stephen S.; Knight, John C.; Shimeall, Timothy J.

1990-01-01

The results of an empirical study of software error detection using self checks and N-version voting are presented. Working independently, each of 24 programmers first prepared a set of self checks using just the requirements specification of an aerospace application, and then each added self checks to an existing implementation of that specification. The modified programs were executed to measure the error-detection performance of the checks and to compare this with error detection using simple voting among multiple versions. The analysis of the checks revealed that there are great differences in the ability of individual programmers to design effective checks. It was found that some checks that might have been effective failed to detect an error because they were badly placed, and there were numerous instances of checks signaling nonexistent errors. In general, specification-based checks alone were not as effective as specification-based checks combined with code-based checks. Self checks made it possible to identify faults that had not been detected previously by voting 28 versions of the program over a million randomly generated inputs. This appeared to result from the fact that the self checks could examine the internal state of the executing program, whereas voting examines only final results of computations. If internal states had to be identical in N-version voting systems, then there would be no reason to write multiple versions.

Applying openEHR's Guideline Definition Language to the SITS international stroke treatment registry: a European retrospective observational study.

PubMed

Anani, Nadim; Mazya, Michael V; Chen, Rong; Prazeres Moreira, Tiago; Bill, Olivier; Ahmed, Niaz; Wahlgren, Nils; Koch, Sabine

2017-01-10

Interoperability standards intend to standardise health information, clinical practice guidelines intend to standardise care procedures, and patient data registries are vital for monitoring quality of care and for clinical research. This study combines all three: it uses interoperability specifications to model guideline knowledge and applies the result to registry data. We applied the openEHR Guideline Definition Language (GDL) to data from 18,400 European patients in the Safe Implementation of Treatments in Stroke (SITS) registry to retrospectively check their compliance with European recommendations for acute stroke treatment. Comparing compliance rates obtained with GDL to those obtained by conventional statistical data analysis yielded a complete match, suggesting that GDL technology is reliable for guideline compliance checking. The successful application of a standard guideline formalism to a large patient registry dataset is an important step toward widespread implementation of computer-interpretable guidelines in clinical practice and registry-based research. Application of the methodology gave important results on the evolution of stroke care in Europe, important both for quality of care monitoring and clinical research.

U.S.-MEXICO BORDER PROGRAM ARIZONA BORDER STUDY--STANDARD OPERATING PROCEDURE FOR FORM QA AND QC CHECKS (UA-C-2.0)

EPA Science Inventory

The purpose of this SOP is to outline the process of field quality assurance and quality control checks. This procedure was followed to ensure consistent data retrieval during the Arizona NHEXAS project and the Border study. Keywords: custody; QA/QC; field checks.

The U.S.-Mex...

[Pharmaceutical product quality control and good manufacturing practices].

PubMed

Hiyama, Yukio

2010-01-01

This report describes the roles of Good Manufacturing Practices (GMP) in pharmaceutical product quality control. There are three keys to pharmaceutical product quality control. They are specifications, thorough product characterization during development, and adherence to GMP as the ICH Q6A guideline on specifications provides the most important principles in its background section. Impacts of the revised Pharmaceutical Affairs Law (rPAL) which became effective in 2005 on product quality control are discussed. Progress of ICH discussion for Pharmaceutical Development (Q8), Quality Risk Management (Q9) and Pharmaceutical Quality System (Q10) are reviewed. In order to reconstruct GMP guidelines and GMP inspection system in the regulatory agencies under the new paradigm by rPAL and the ICH, a series of Health Science studies were conducted. For GMP guidelines, product GMP guideline, technology transfer guideline, laboratory control guideline and change control system guideline were written. For the GMP inspection system, inspection check list, inspection memo and inspection scenario were proposed also by the Health Science study groups. Because pharmaceutical products and their raw materials are manufactured and distributed internationally, collaborations with other national authorities are highly desired. In order to enhance the international collaborations, consistent establishment of GMP inspection quality system throughout Japan will be essential.

75 FR 40033 - Proposed Collection; Comment Request for Taxpayer Advocacy Panel (TAP) Tax Check Waiver

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-13

... Taxpayer Advocacy Panel (TAP) Tax Check Waiver AGENCY: Internal Revenue Service (IRS), Treasury. ACTION... comments concerning Taxpayer Advocacy Panel (TAP) Tax Check Waiver. DATES: Written comments should [email protected] . SUPPLEMENTARY INFORMATION: Title: Taxpayer Advocacy Panel (TAP) Tax Check Waiver. OMB...

40 CFR 51.363 - Quality assurance.

Code of Federal Regulations, 2011 CFR

2011-07-01

... test, the evaporative system tests, and emission control component checks (as applicable); (vi...) A check of the Constant Volume Sampler flow calibration; (5) A check for the optimization of the... selection, and power absorption; (9) A check of the system's ability to accurately detect background...

Data quality assessment for comparative effectiveness research in distributed data networks

PubMed Central

Brown, Jeffrey; Kahn, Michael; Toh, Sengwee

2015-01-01

Background Electronic health information routinely collected during healthcare delivery and reimbursement can help address the need for evidence about the real-world effectiveness, safety, and quality of medical care. Often, distributed networks that combine information from multiple sources are needed to generate this real-world evidence. Objective We provide a set of field-tested best practices and a set of recommendations for data quality checking for comparative effectiveness research (CER) in distributed data networks. Methods Explore the requirements for data quality checking and describe data quality approaches undertaken by several existing multi-site networks. Results There are no established standards regarding how to evaluate the quality of electronic health data for CER within distributed networks. Data checks of increasing complexity are often employed, ranging from consistency with syntactic rules to evaluation of semantics and consistency within and across sites. Temporal trends within and across sites are widely used, as are checks of each data refresh or update. Rates of specific events and exposures by age group, sex, and month are also common. Discussion Secondary use of electronic health data for CER holds promise but is complex, especially in distributed data networks that incorporate periodic data refreshes. The viability of a learning health system is dependent on a robust understanding of the quality, validity, and optimal secondary uses of routinely collected electronic health data within distributed health data networks. Robust data quality checking can strengthen confidence in findings based on distributed data network. PMID:23793049

Program Model Checking as a New Trend

NASA Technical Reports Server (NTRS)

Havelund, Klaus; Visser, Willem; Clancy, Daniel (Technical Monitor)

2002-01-01

This paper introduces a special section of STTT (International Journal on Software Tools for Technology Transfer) containing a selection of papers that were presented at the 7th International SPIN workshop, Stanford, August 30 - September 1, 2000. The workshop was named SPIN Model Checking and Software Verification, with an emphasis on model checking of programs. The paper outlines the motivation for stressing software verification, rather than only design and model verification, by presenting the work done in the Automated Software Engineering group at NASA Ames Research Center within the last 5 years. This includes work in software model checking, testing like technologies and static analysis.

A qualitative study of DRG coding practice in hospitals under the Thai Universal Coverage scheme.

PubMed

Pongpirul, Krit; Walker, Damian G; Winch, Peter J; Robinson, Courtland

2011-04-08

In the Thai Universal Coverage health insurance scheme, hospital providers are paid for their inpatient care using Diagnosis Related Group-based retrospective payment, for which quality of the diagnosis and procedure codes is crucial. However, there has been limited understandings on which health care professions are involved and how the diagnosis and procedure coding is actually done within hospital settings. The objective of this study is to detail hospital coding structure and process, and to describe the roles of key hospital staff, and other related internal dynamics in Thai hospitals that affect quality of data submitted for inpatient care reimbursement. Research involved qualitative semi-structured interview with 43 participants at 10 hospitals chosen to represent a range of hospital sizes (small/medium/large), location (urban/rural), and type (public/private). Hospital Coding Practice has structural and process components. While the structural component includes human resources, hospital committee, and information technology infrastructure, the process component comprises all activities from patient discharge to submission of the diagnosis and procedure codes. At least eight health care professional disciplines are involved in the coding process which comprises seven major steps, each of which involves different hospital staff: 1) Discharge Summarization, 2) Completeness Checking, 3) Diagnosis and Procedure Coding, 4) Code Checking, 5) Relative Weight Challenging, 6) Coding Report, and 7) Internal Audit. The hospital coding practice can be affected by at least five main factors: 1) Internal Dynamics, 2) Management Context, 3) Financial Dependency, 4) Resource and Capacity, and 5) External Factors. Hospital coding practice comprises both structural and process components, involves many health care professional disciplines, and is greatly varied across hospitals as a result of five main factors.

A qualitative study of DRG coding practice in hospitals under the Thai Universal Coverage Scheme

PubMed Central

2011-01-01

Background In the Thai Universal Coverage health insurance scheme, hospital providers are paid for their inpatient care using Diagnosis Related Group-based retrospective payment, for which quality of the diagnosis and procedure codes is crucial. However, there has been limited understandings on which health care professions are involved and how the diagnosis and procedure coding is actually done within hospital settings. The objective of this study is to detail hospital coding structure and process, and to describe the roles of key hospital staff, and other related internal dynamics in Thai hospitals that affect quality of data submitted for inpatient care reimbursement. Methods Research involved qualitative semi-structured interview with 43 participants at 10 hospitals chosen to represent a range of hospital sizes (small/medium/large), location (urban/rural), and type (public/private). Results Hospital Coding Practice has structural and process components. While the structural component includes human resources, hospital committee, and information technology infrastructure, the process component comprises all activities from patient discharge to submission of the diagnosis and procedure codes. At least eight health care professional disciplines are involved in the coding process which comprises seven major steps, each of which involves different hospital staff: 1) Discharge Summarization, 2) Completeness Checking, 3) Diagnosis and Procedure Coding, 4) Code Checking, 5) Relative Weight Challenging, 6) Coding Report, and 7) Internal Audit. The hospital coding practice can be affected by at least five main factors: 1) Internal Dynamics, 2) Management Context, 3) Financial Dependency, 4) Resource and Capacity, and 5) External Factors. Conclusions Hospital coding practice comprises both structural and process components, involves many health care professional disciplines, and is greatly varied across hospitals as a result of five main factors. PMID:21477310

A Micro-Computed Tomography Technique to Study the Quality of Fibre Optics Embedded in Composite Materials

PubMed Central

Chiesura, Gabriele; Luyckx, Geert; Voet, Eli; Lammens, Nicolas; Van Paepegem, Wim; Degrieck, Joris; Dierick, Manuel; Van Hoorebeke, Luc; Vanderniepen, Pieter; Sulejmani, Sanne; Sonnenfeld, Camille; Geernaert, Thomas; Berghmans, Francis

2015-01-01

Quality of embedment of optical fibre sensors in carbon fibre-reinforced polymers plays an important role in the resultant properties of the composite, as well as for the correct monitoring of the structure. Therefore, availability of a tool able to check the optical fibre sensor-composite interaction becomes essential. High-resolution 3D X-ray Micro-Computed Tomography, or Micro-CT, is a relatively new non-destructive inspection technique which enables investigations of the internal structure of a sample without actually compromising its integrity. In this work the feasibility of inspecting the position, the orientation and, more generally, the quality of the embedment of an optical fibre sensor in a carbon fibre reinforced laminate at unit cell level have been proven. PMID:25961383

Performance Qualification Test of the ISS Water Processor Assembly (WPA) Expendables

NASA Technical Reports Server (NTRS)

Carter, Layne; Tabb, David; Tatara, James D.; Mason, Richard K.

2005-01-01

The Water Processor Assembly (WPA) for use on the International Space Station (ISS) includes various technologies for the treatment of waste water. These technologies include filtration, ion exchange, adsorption, catalytic oxidation, and iodination. The WPA hardware implementing portions of these technologies, including the Particulate Filter, Multifiltration Bed, Ion Exchange Bed, and Microbial Check Valve, was recently qualified for chemical performance at the Marshall Space Flight Center. Waste water representing the quality of that produced on the ISS was generated by test subjects and processed by the WPA. Water quality analysis and instrumentation data was acquired throughout the test to monitor hardware performance. This paper documents operation of the test and the assessment of the hardware performance.

Take the Reins on Model Quality with ModelCHECK and Gatekeeper

NASA Technical Reports Server (NTRS)

Jones, Corey

2012-01-01

Model quality and consistency has been an issue for us due to the diverse experience level and imaginative modeling techniques of our users. Fortunately, setting up ModelCHECK and Gatekeeper to enforce our best practices has helped greatly, but it wasn't easy. There were many challenges associated with setting up ModelCHECK and Gatekeeper including: limited documentation, restrictions within ModelCHECK, and resistance from end users. However, we consider ours a success story. In this presentation we will describe how we overcame these obstacles and present some of the details of how we configured them to work for us.

STS-34 onboard view of iodine comparator assembly used to check water quality

NASA Technical Reports Server (NTRS)

1989-01-01

STS-34 closeup view taken onboard Atlantis, Orbiter Vehicle (OV) 104, is of the iodine comparator assembly. Potable water quality is checked by comparing the water color to the color chart on the surrounding board.

Wikipedia and osteosarcoma: a trustworthy patients' information?

PubMed

Leithner, Andreas; Maurer-Ertl, Werner; Glehr, Mathias; Friesenbichler, Joerg; Leithner, Katharina; Windhager, Reinhard

2010-01-01

The English version of the online encyclopedia, Wikipedia, has been recently reported to be the prominent source of online health information. However, there is little information concerning the quality of information found in Wikipedia. Therefore, we created a questionnaire asking for scope, completeness, and accuracy of information found on osteosarcoma. Three independent observers tested the English version of Wikipedia, as well as the patient version and the health professional version of the US National Cancer Institute (NCI) website. Answers were verified with authoritative resources and international guidelines. The results of our study demonstrate that the quality of osteosarcoma-related information found in the English Wikipedia is good but inferior to the patient information provided by the NCI. Therefore, non-peer-reviewed commonly used websites offering health information, such as Wikipedia, should include links to more definitive sources, such as those maintained by the NCI and professional international organizations on healthcare treatments. Furthermore, frequent checks should make sure such external links are to the highest quality and to the best-maintained aggregate sites on a given healthcare topic.

Wikipedia and osteosarcoma: a trustworthy patients' information?

PubMed Central

Maurer-Ertl, Werner; Glehr, Mathias; Friesenbichler, Joerg; Leithner, Katharina; Windhager, Reinhard

2010-01-01

The English version of the online encyclopedia, Wikipedia, has been recently reported to be the prominent source of online health information. However, there is little information concerning the quality of information found in Wikipedia. Therefore, we created a questionnaire asking for scope, completeness, and accuracy of information found on osteosarcoma. Three independent observers tested the English version of Wikipedia, as well as the patient version and the health professional version of the US National Cancer Institute (NCI) website. Answers were verified with authoritative resources and international guidelines. The results of our study demonstrate that the quality of osteosarcoma-related information found in the English Wikipedia is good but inferior to the patient information provided by the NCI. Therefore, non-peer-reviewed commonly used websites offering health information, such as Wikipedia, should include links to more definitive sources, such as those maintained by the NCI and professional international organizations on healthcare treatments. Furthermore, frequent checks should make sure such external links are to the highest quality and to the best-maintained aggregate sites on a given healthcare topic. PMID:20595302

Check radiography after fixation of hip fractures: is it necessary?

PubMed

Mohanty, K; Gupta, S K; Evans, R M

2000-12-01

Technological advances in radiography in the form of image intensification has not only made internal fixation of femoral neck fracture much easier but these high resolution films can be saved as hard copies and can also be reversed into 'positives' at a later date. However, requesting routine post-operative check radiographs for these fractures are still a common practice. A retrospective study was carried out to compare the quality of image intensifier films with conventional post-operative radiographs. 79 sets of films were reviewed with particular reference to adequacy of fixation and possible joint penetration by the screws. No significant difference was noted between the two sets of films. We suggest that routine post-operative radiographs after femoral neck fracture fixation are unnecessary unless there is some clinical indication. This has significant implications in relation to patient discomfort, radiation exposure and cost-effectiveness.

Music festival attendees' illicit drug use, knowledge and practices regarding drug content and purity: a cross-sectional survey.

PubMed

Day, Niamh; Criss, Joshua; Griffiths, Benjamin; Gujral, Shireen Kaur; John-Leader, Franklin; Johnston, Jennifer; Pit, Sabrina

2018-01-05

Drug checking is a harm reduction strategy which allows users to check the content and purity of illicit drugs. Although drug checking has been trialled internationally, with demonstrated value as a harm reduction and health promotion strategy, the use of such services in Australia remains a contentious issue. This study aimed to investigate the proportion and patterns of illicit drug use among young people, their attitudes towards drug checking at festivals and the potential impact of drug checking on intended drug use behaviour. The survey was conducted at a major Australian music festival in 2016. Data was collected from a sample of festival attendees (n = 642) aged between 18 and 30 years. A descriptive analysis of the data was performed. Nearly three-quarters (73.4%) of participants reported that they had used illicit drugs in the past 12 months, most commonly cannabis (63.9%) and ecstasy (59.8%). A large proportion of participants believed 'somewhat' or 'a lot' that drug checking services could help users seek help to reduce harm (86.5%) and that drug checking services should be combined with harm reduction advice (84.9%). However, two thirds of the participants agreed 'somewhat' or 'a lot' that drug sellers may use this service as a quality control mechanism (68.6%). Approximately half (54.4%) indicated they would be highly likely and a third (32.7%) would be somewhat likely to utilise free drug checking services should they be available at music festivals. When asked whether the results of drug checking would influence their drug use behaviour, participants reported that they would not take substances shown to contain methamphetamine (65.1%), ketamine (57.5%) or para-methoxyamphetamine (PMA) (58.4%). The majority of festival attendees aged 18-30 participating in this study reported a history of illicit drug use and were in favour of the provision of free drug checking at festivals. A considerable proportion reported that the results of drug checking would influence their drug use behaviour. The findings of this study can contribute to the debate regarding whether drug checking services could potentially play a major role in harm reduction and health promotion programming for young people attending festivals.

[Cleaning and disinfection in nursing homes. Data on quality of structure, process and outcome in nursing homes in Frankfurt am Main, Germany, 2011].

PubMed

Heudorf, U; Gasteyer, S; Samoiski, Y; Voigt, K

2012-08-01

Due to the Infectious Disease Prevention Act, public health services in Germany are obliged to check the infection prevention in hospitals and other medical facilities as well as in nursing homes. In Frankfurt/Main, Germany, standardized control visits have been performed for many years. In 2011 focus was laid on cleaning and disinfection of surfaces. All 41 nursing homes were checked according to a standardized checklist covering quality of structure (i.e. staffing, hygiene concept), quality of process (observation of the cleaning processes in the homes) and quality of output, which was monitored by checking the cleaning of fluorescent marks which had been applied some days before and should have been removed via cleaning in the following days before the final check. In more than two thirds of the homes, cleaning personnel were salaried, in one third external personnel were hired. Of the homes 85% provided service clothing and all of them offered protective clothing. All homes had established hygiene and cleaning concepts, however, in 15% of the homes concepts for the handling of Norovirus and in 30% concepts for the handling of Clostridium difficile were missing. Regarding process quality only half of the processes observed, i.e. cleaning of hand contact surfaces, such as handrails, washing areas and bins, were correct. Only 44% of the cleaning controls were correct with enormous differences between the homes (0-100%). The correlation between quality of process and quality of output was significant. There was good quality of structure in the homes but regarding quality of process and outcome there was great need for improvement. This was especially due to faults in communication and coordination between cleaning personnel and nursing personnel. Quality outcome was neither associated with the number of the places for residents nor with staffing. Thus, not only quality of structure but also quality of process and outcome should be checked by the public health services.

Control Chart on Semi Analytical Weighting

NASA Astrophysics Data System (ADS)

Miranda, G. S.; Oliveira, C. C.; Silva, T. B. S. C.; Stellato, T. B.; Monteiro, L. R.; Marques, J. R.; Faustino, M. G.; Soares, S. M. V.; Ulrich, J. C.; Pires, M. A. F.; Cotrim, M. E. B.

2018-03-01

Semi-analytical balance verification intends to assess the balance performance using graphs that illustrate measurement dispersion, trough time, and to demonstrate measurements were performed in a reliable manner. This study presents internal quality control of a semi-analytical balance (GEHAKA BG400) using control charts. From 2013 to 2016, 2 weight standards were monitored before any balance operation. This work intended to evaluate if any significant difference or bias were presented on weighting procedure over time, to check the generated data reliability. This work also exemplifies how control intervals are established.

A rigorous approach to self-checking programming

NASA Technical Reports Server (NTRS)

Hua, Kien A.; Abraham, Jacob A.

1986-01-01

Self-checking programming is shown to be an effective concurrent error detection technique. The reliability of a self-checking program however relies on the quality of its assertion statements. A self-checking program written without formal guidelines could provide a poor coverage of the errors. A constructive technique for self-checking programming is presented. A Structured Program Design Language (SPDL) suitable for self-checking software development is defined. A set of formal rules, was also developed, that allows the transfromation of SPDL designs into self-checking designs to be done in a systematic manner.

31 CFR 240.6 - Provisional credit; first examination; declination; final payment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... alteration without examining the original check or a better quality image of the check and Treasury is on... after the check is presented to a Federal Reserve Processing Center for payment, Treasury will be deemed...

31 CFR 240.6 - Provisional credit; first examination; declination; final payment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... alteration without examining the original check or a better quality image of the check and Treasury is on... after the check is presented to a Federal Reserve Processing Center for payment, Treasury will be deemed...

31 CFR 240.6 - Provisional credit; first examination; declination; final payment.

Code of Federal Regulations, 2014 CFR

2014-07-01

... alteration without examining the original check or a better quality image of the check and Treasury is on... after the check is presented to a Federal Reserve Processing Center for payment, Treasury will be deemed...

31 CFR 240.6 - Provisional credit; first examination; declination; final payment.

Code of Federal Regulations, 2013 CFR

2013-07-01

... alteration without examining the original check or a better quality image of the check and Treasury is on... after the check is presented to a Federal Reserve Processing Center for payment, Treasury will be deemed...

31 CFR 240.6 - Provisional credit; first examination; declination; final payment.

Code of Federal Regulations, 2012 CFR

2012-07-01

... alteration without examining the original check or a better quality image of the check and Treasury is on... after the check is presented to a Federal Reserve Processing Center for payment, Treasury will be deemed...

Quality control quantification (QCQ): a tool to measure the value of quality control checks in radiation oncology.

PubMed

Ford, Eric C; Terezakis, Stephanie; Souranis, Annette; Harris, Kendra; Gay, Hiram; Mutic, Sasa

2012-11-01

To quantify the error-detection effectiveness of commonly used quality control (QC) measures. We analyzed incidents from 2007-2010 logged into a voluntary in-house, electronic incident learning systems at 2 academic radiation oncology clinics. None of the incidents resulted in patient harm. Each incident was graded for potential severity using the French Nuclear Safety Authority scoring scale; high potential severity incidents (score >3) were considered, along with a subset of 30 randomly chosen low severity incidents. Each report was evaluated to identify which of 15 common QC checks could have detected it. The effectiveness was calculated, defined as the percentage of incidents that each QC measure could detect, both for individual QC checks and for combinations of checks. In total, 4407 incidents were reported, 292 of which had high-potential severity. High- and low-severity incidents were detectable by 4.0 ± 2.3 (mean ± SD) and 2.6 ± 1.4 QC checks, respectively (P<.001). All individual checks were less than 50% sensitive with the exception of pretreatment plan review by a physicist (63%). An effectiveness of 97% was achieved with 7 checks used in combination and was not further improved with more checks. The combination of checks with the highest effectiveness includes physics plan review, physician plan review, Electronic Portal Imaging Device-based in vivo portal dosimetry, radiation therapist timeout, weekly physics chart check, the use of checklists, port films, and source-to-skin distance checks. Some commonly used QC checks such as pretreatment intensity modulated radiation therapy QA do not substantially add to the ability to detect errors in these data. The effectiveness of QC measures in radiation oncology depends sensitively on which checks are used and in which combinations. A small percentage of errors cannot be detected by any of the standard formal QC checks currently in broad use, suggesting that further improvements are needed. These data require confirmation with a broader incident-reporting database. Copyright © 2012 Elsevier Inc. All rights reserved.

The relation of mechanical properties of wood and nosebar pressure in the production of veneer

Treesearch

Charles W. McMillin

1958-01-01

Observations of checking frequency, depth of check penetration, veneer thickness, and surface quality were made at 20 machining conditions. An inverse relationship between depth of check and frequency of checking was established. The effect of cutting temperature was demonstrated, and strength in compression perpendicular to the grain, tension perpendicular to the...

Internal Consistency, Retest Reliability, and their Implications For Personality Scale Validity

PubMed Central

McCrae, Robert R.; Kurtz, John E.; Yamagata, Shinji; Terracciano, Antonio

2010-01-01

We examined data (N = 34,108) on the differential reliability and validity of facet scales from the NEO Inventories. We evaluated the extent to which (a) psychometric properties of facet scales are generalizable across ages, cultures, and methods of measurement; and (b) validity criteria are associated with different forms of reliability. Composite estimates of facet scale stability, heritability, and cross-observer validity were broadly generalizable. Two estimates of retest reliability were independent predictors of the three validity criteria; none of three estimates of internal consistency was. Available evidence suggests the same pattern of results for other personality inventories. Internal consistency of scales can be useful as a check on data quality, but appears to be of limited utility for evaluating the potential validity of developed scales, and it should not be used as a substitute for retest reliability. Further research on the nature and determinants of retest reliability is needed. PMID:20435807

27 CFR 70.61 - Payment by check or money order.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2012-04-01 2011-04-01 true Payment by check or money... Collection of Excise and Special (Occupational) Tax Receipt of Payment § 70.61 Payment by check or money... State, Territory, or possession of the United States, or money orders in payment for internal revenue...

27 CFR 70.61 - Payment by check or money order.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2013-04-01 2013-04-01 false Payment by check or money... Collection of Excise and Special (Occupational) Tax Receipt of Payment § 70.61 Payment by check or money... State, Territory, or possession of the United States, or money orders in payment for internal revenue...

27 CFR 70.61 - Payment by check or money order.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2011-04-01 2011-04-01 false Payment by check or money... Collection of Excise and Special (Occupational) Tax Receipt of Payment § 70.61 Payment by check or money... State, Territory, or possession of the United States, or money orders in payment for internal revenue...

27 CFR 70.61 - Payment by check or money order.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2014-04-01 2014-04-01 false Payment by check or money... Collection of Excise and Special (Occupational) Tax Receipt of Payment § 70.61 Payment by check or money... State, Territory, or possession of the United States, or money orders in payment for internal revenue...

25 CFR 542.14 - What are the minimum internal control standards for the cage?

Code of Federal Regulations, 2011 CFR

2011-04-01

..., collecting and recording checks returned to the gaming operation after deposit, re-deposit, and write-off... person approving the counter check transaction. (4) When traveler's checks or other guaranteed drafts... identity, including photo identification. (8) A file for customers shall be prepared prior to acceptance of...

Non-invasive quality evaluation of confluent cells by image-based orientation heterogeneity analysis.

PubMed

Sasaki, Kei; Sasaki, Hiroto; Takahashi, Atsuki; Kang, Siu; Yuasa, Tetsuya; Kato, Ryuji

2016-02-01

In recent years, cell and tissue therapy in regenerative medicine have advanced rapidly towards commercialization. However, conventional invasive cell quality assessment is incompatible with direct evaluation of the cells produced for such therapies, especially in the case of regenerative medicine products. Our group has demonstrated the potential of quantitative assessment of cell quality, using information obtained from cell images, for non-invasive real-time evaluation of regenerative medicine products. However, image of cells in the confluent state are often difficult to evaluate, because accurate recognition of cells is technically difficult and the morphological features of confluent cells are non-characteristic. To overcome these challenges, we developed a new image-processing algorithm, heterogeneity of orientation (H-Orient) processing, to describe the heterogeneous density of cells in the confluent state. In this algorithm, we introduced a Hessian calculation that converts pixel intensity data to orientation data and a statistical profiling calculation that evaluates the heterogeneity of orientations within an image, generating novel parameters that yield a quantitative profile of an image. Using such parameters, we tested the algorithm's performance in discriminating different qualities of cellular images with three types of clinically important cell quality check (QC) models: remaining lifespan check (QC1), manipulation error check (QC2), and differentiation potential check (QC3). Our results show that our orientation analysis algorithm could predict with high accuracy the outcomes of all types of cellular quality checks (>84% average accuracy with cross-validation). Copyright © 2015 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Financial Record Checking in Surveys: Do Prompts Improve Data Quality?

ERIC Educational Resources Information Center

Murphy, Joe; Rosen, Jeffrey; Richards, Ashley; Riley, Sarah; Peytchev, Andy; Lindblad, Mark

2016-01-01

Self-reports of financial information in surveys, such as wealth, income, and assets, are particularly prone to inaccuracy. We sought to improve the quality of financial information captured in a survey conducted by phone and in person by encouraging respondents to check records when reporting on income and assets. We investigated whether…

40 CFR Appendix B to Part 75 - Quality Assurance and Quality Control Procedures

Code of Federal Regulations, 2012 CFR

2012-07-01

... Systems 1.2.1Calibration Error Test and Linearity Check Procedures Keep a written record of the procedures used for daily calibration error tests and linearity checks (e.g., how gases are to be injected..., and when calibration adjustments should be made). Identify any calibration error test and linearity...

40 CFR Appendix B to Part 75 - Quality Assurance and Quality Control Procedures

Code of Federal Regulations, 2013 CFR

2013-07-01

... Systems 1.2.1Calibration Error Test and Linearity Check Procedures Keep a written record of the procedures used for daily calibration error tests and linearity checks (e.g., how gases are to be injected..., and when calibration adjustments should be made). Identify any calibration error test and linearity...

Audit and internal quality control in immunohistochemistry

PubMed Central

Maxwell, P; McCluggage, W

2000-01-01

Aims—Although positive and negative controls are performed and checked in surgical pathology cases undergoing immunohistochemistry, internal quality control procedures for immunohistochemistry are not well described. This study, comprising a retrospective audit, aims to describe a method of internal quality control for immunohistochemistry. A scoring system that allows comparison between cases is described. Methods—Two positive tissue controls for each month over a three year period (1996–1998) of the 10 antibodies used most frequently were evaluated. All test cases undergoing immunohistochemistry in the months of April in this three year period were also studied. When the test case was completely negative for a given antibody, the corresponding positive tissue control from that day was examined. A marking system was devised whereby each immunohistochemical slide was assessed out of a possible score of 8 to take account of staining intensity, uniformity, specificity, background, and counterstaining. Using this scoring system, cases were classified as showing optimal (7–8), borderline (5–6), or unacceptable (0–4) staining. Results—Most positive tissue controls showed either optimal or borderline staining with the exception of neurone specific enolase (NSE), where most slides were unacceptable or borderline as a result of a combination of low intensity, poor specificity, and excessive background staining. All test cases showed either optimal or borderline staining with the exception of a single case stained for NSE, which was unacceptable. Conclusions—This retrospective audit shows that immunohistochemically stained slides can be assessed using this scoring system. With most antibodies, acceptable staining was achieved in most cases. However, there were problems with staining for NSE, which needs to be reviewed. Laboratories should use a system such as this to evaluate which antibodies regularly result in poor staining so that they can be excluded from panels. Routine evaluation of immunohistochemical staining should become part of everyday internal quality control procedures. Key Words: immunohistochemistry • audit • internal quality control PMID:11265178

Raman LIDAR for UHECR experiments: an overview of the L'Aquila (Italy) lidar station experience for the retrieval of quality-assured data

NASA Astrophysics Data System (ADS)

Iarlori, Marco; Rizi, Vincenzo; D'Amico, Giuseppe; Freudenthaler, Volker; Wandinger, Ulla; Grillo, Aurelio

L'Aquila (Italy) lidar station is part of the EARLINET (European Aerosol Research Lidar Network) since its beginning in the 2000. In the EARLINET community great efforts are devoted to the quality-assurance of the aerosol optical properties inserted in the database. To this end, each lidar station performed intercomparisons with reference instruments, a series of internal hardware checks in order to assess the quality of their instruments and exercises to test the algorithms used to retrieve the aerosol optical parameters. In this paper we give an overview of our experience within EARLINET qualityassurance (QA) program, which was adopted for the Raman lidar (RL) operated in the AUGER Observatory. This program could be systematically adopted for the lidar systems needed for the current and upcoming UHECR experiments, like CTA (Cherenkov Telescope Array).

IEC 61511 and the capital project process--a protective management system approach.

PubMed

Summers, Angela E

2006-03-17

This year, the process industry has reached an important milestone in process safety-the acceptance of an internationally recognized standard for safety instrumented systems (SIS). This standard, IEC 61511, documents good engineering practice for the assessment, design, operation, maintenance, and management of SISs. The foundation of the standard is established by several requirements in Part 1, Clauses 5-7, which cover the development of a management system aimed at ensuring that functional safety is achieved. The management system includes a quality assurance process for the entire SIS lifecycle, requiring the development of procedures, identification of resources and acquisition of tools. For maximum benefit, the deliverables and quality control checks required by the standard should be integrated into the capital project process, addressing safety, environmental, plant productivity, and asset protection. Industry has become inundated with a multitude of programs focusing on safety, quality, and cost performance. This paper introduces a protective management system, which builds upon the work process identified in IEC 61511. Typical capital project phases are integrated with the management system to yield one comprehensive program to efficiently manage process risk. Finally, the paper highlights areas where internal practices or guidelines should be developed to improve program performance and cost effectiveness.

Advanced Plant Habitat Flight Unit #1

NASA Image and Video Library

2017-07-24

Inside a laboratory in the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, a quality technician checks the hardware for the Advanced Plant Habitat flight unit. The flight unit is an exact replica of the APH that was delivered to the International Space Station. Validation tests and post-delivery checkout was performed to prepare for space station in-orbit APH activities. The flight unit will be moved to the International Space Station Environmental Simulator to begin an experiment verification test for the science that will fly on the first mission, PH-01. Developed by NASA and ORBITEC of Madison, Wisconsin, the APH is the largest plant chamber built for the agency. It is a fully automated plant growth facility that will be used to conduct bioscience research on the space station.

Advanced Plant Habitat Flight Unit #1

NASA Image and Video Library

2017-07-24

Inside a laboratory in the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, quality technicians check the hardware for the Advanced Plant Habitat flight unit. The flight unit is an exact replica of the APH that was delivered to the International Space Station. Validation tests and post-delivery checkout was performed to prepare for space station in-orbit APH activities. The flight unit will be moved to the International Space Station Environmental Simulator to begin an experiment verification test for the science that will fly on the first mission, PH-01. Developed by NASA and ORBITEC of Madison, Wisconsin, the APH is the largest plant chamber built for the agency. It is a fully automated plant growth facility that will be used to conduct bioscience research on the space station.

Advanced Plant Habitat Flight Unit #1

NASA Image and Video Library

2017-07-24

Inside a laboratory in the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, quality technicians check components of the hardware for the Advanced Plant Habitat flight unit. The flight unit is an exact replica of the APH that was delivered to the International Space Station. Validation tests and post-delivery checkout was performed to prepare for space station in-orbit APH activities. The flight unit will be moved to the International Space Station Environmental Simulator to begin an experiment verification test for the science that will fly on the first mission, PH-01. Developed by NASA and ORBITEC of Madison, Wisconsin, the APH is the largest plant chamber built for the agency. It is a fully automated plant growth facility that will be used to conduct bioscience research on the space station.

Advanced Plant Habitat Flight Unit #1

NASA Image and Video Library

2017-07-24

Inside a laboratory in the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, quality technicians check the hardware for the Advanced Plant Habitat flight unit. The flight unit is an exact replica of the APH that was delivered to the International Space Station. Validation tests and post-delivery checkout was performed to prepare for space station in-orbit APH activities. The flight unit will be moved to the International Space Station Environment Simulator to begin an experiment verification test for the science that will fly on the first mission, PH-01. Developed by NASA and ORBITEC of Madison, Wisconsin, the APH is the largest plant chamber built for the agency. It is a fully automated plant growth facility that will be used to conduct bioscience research on the space station.

Advanced Plant Habitat Flight Unit #1

NASA Image and Video Library

2017-07-24

Inside a laboratory in the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, a quality technician checks the control panel on hardware for the Advanced Plant Habitat flight unit. The flight unit is an exact replica of the APH that was delivered to the International Space Station. Validation tests and post-delivery checkout was performed to prepare for space station in-orbit APH activities. The flight unit will be moved to the International Space Station Environmental Simulator to begin an experiment verification test for the science that will fly on the first mission, PH-01. Developed by NASA and ORBITEC of Madison, Wisconsin, the APH is the largest plant chamber built for the agency. It is a fully automated plant growth facility that will be used to conduct bioscience research on the space station.

Texas International Airlines LOFT program

NASA Technical Reports Server (NTRS)

Sommerville, J.

1981-01-01

A line-oriented flight training program which allows the crew to work as a team to solve all problems, abnormal or emergency, within the crew concept. A line-oriented check ride takes place every six months for the pilot as a proficiency check. There are advantages and disadvantages to this program. One disadvantage is that since it is designed as a check-ride, the scenarios must be structured so that the average pilot will complete the check-ride without complication. This system is different from a proficiency check which can be stopped at a problem area so training to proficiency can take place before proceeding with the check.

The development of a decision aid for tinnitus.

PubMed

Pryce, Helen; Durand, Marie-Anne; Hall, Amanda; Shaw, Rachel; Culhane, Beth-Anne; Swift, Sarah; Straus, Jean; Marks, Elizabeth; Ward, Melanie; Chilvers, Katie

2018-05-09

To develop a decision aid for tinnitus care that would meet international consensus for decision aid quality. A mixed methods design that included qualitative in-depth interviews, literature review, focus groups, user testing and readability checking. Patients and clinicians who have clinical experience of tinnitus. A decision aid for tinnitus care was developed. This incorporates key evidence of efficacy for the most frequently used tinnitus care options, together with information derived from patient priorities when deciding which choice to make. The decision aid has potential to enable shared decision making between clinicians and patients in audiology. The decision aid meets consensus standards.

AmeriFlux Data Processing: Integrating automated and manual data management across software technologies and an international network to generate timely data products

NASA Astrophysics Data System (ADS)

Christianson, D. S.; Beekwilder, N.; Chan, S.; Cheah, Y. W.; Chu, H.; Dengel, S.; O'Brien, F.; Pastorello, G.; Sandesh, M.; Torn, M. S.; Agarwal, D.

2017-12-01

AmeriFlux is a network of scientists who independently collect eddy covariance and related environmental observations at over 250 locations across the Americas. As part of the AmeriFlux Management Project, the AmeriFlux Data Team manages standardization, collection, quality assurance / quality control (QA/QC), and distribution of data submitted by network members. To generate data products that are timely, QA/QC'd, and repeatable, and have traceable provenance, we developed a semi-automated data processing pipeline. The new pipeline consists of semi-automated format and data QA/QC checks. Results are communicated via on-line reports as well as an issue-tracking system. Data processing time has been reduced from 2-3 days to a few hours of manual review time, resulting in faster data availability from the time of data submission. The pipeline is scalable to the network level and has the following key features. (1) On-line results of the format QA/QC checks are available immediately for data provider review. This enables data providers to correct and resubmit data quickly. (2) The format QA/QC assessment includes an automated attempt to fix minor format errors. Data submissions that are formatted in the new AmeriFlux FP-In standard can be queued for the data QA/QC assessment, often with minimal delay. (3) Automated data QA/QC checks identify and communicate potentially erroneous data via online, graphical quick views that highlight observations with unexpected values, incorrect units, time drifts, invalid multivariate correlations, and/or radiation shadows. (4) Progress through the pipeline is integrated with an issue-tracking system that facilitates communications between data providers and the data processing team in an organized and searchable fashion. Through development of these and other features of the pipeline, we present solutions to challenges that include optimizing automated with manual processing, bridging legacy data management infrastructure with various software tools, and working across interdisciplinary and international science cultures. Additionally, we discuss results from community member feedback that helped refine QA/QC communications for efficient data submission and revision.

Wf/pc Cycle 2 Calibration: Rapid Internal Monitor - Part 2

NASA Astrophysics Data System (ADS)

MacKenty, John

1991-07-01

This test is to take repeated internal flats to test for contamination buildup on the optical surfaces or the reappearance of QEH. Part 1: INTFLATS in F555W are obtained every 4 days in both WFC and PC to check for measles or daisies and to monitor scattered light. Part 2: Sequential INTFLATS in F439W with PC are obtained every 7 days to check for QEH.

Wf/pc Cycle 1 Calibration: Rapid Internal Monitor

NASA Astrophysics Data System (ADS)

MacKenty, John

1990-12-01

This test is to take repeated internal flats to test for contamination buildup on the optical surfaces or the reappearance of QEH. Part 1: INTFLATS in F555W are obtained every 4 days in both WFC and PC to check for measles or daisies and to monitor scattered light. Part 2: Sequential INTFLATS in F439W with PC are obtained every 7 days to check for QEH.

Wf/pc Cycle 3 Calibration: Rapid Internal Monitor

NASA Astrophysics Data System (ADS)

MacKenty, John

1992-06-01

This test is to take repeated internal flats to test for contamination buildup on the optical surfaces or the reappearance of QEH. Part 1: INTFLATS in F555W are obtained every 4 days in both WFC and PC to check for measles or daisies and to monitor scattered light. Part 2: Sequential INTFLATS in F439W with PC are obtained every 7 days to check for QEH.

Wf/pc Cycle 2 Calibration: Rapid Internal Monitor

NASA Astrophysics Data System (ADS)

MacKenty, John

1991-07-01

This test is to take repeated internal flats to test for contamination buildup on the optical surfaces or the reappearance of QEH. Part 1: INTFLATS in F555W are obtained every 4 days in both WFC and PC to check for measles or daisies and to monitor scattered light. Part 2: Sequential INTFLATS in F439W with PC are obtained every 7 days to check for QEH.

Wf/pc Cycle 3 Calibration: Rapid Internal Monitor - Part 2

NASA Astrophysics Data System (ADS)

MacKenty, John

1992-06-01

This test is to take repeated internal flats to test for contamination buildup on the optical surfaces or the reappearance of QEH. Part 1: INTFLATS in F555W are obtained every 4 days in both WFC and PC to check for measles or daisies and to monitor scattered light. Part 2: Sequential INTFLATS in F439W with PC are obtained every 7 days to check for QEH.

The Significance of Quality Assurance within Model Intercomparison Projects at the World Data Centre for Climate (WDCC)

NASA Astrophysics Data System (ADS)

Toussaint, F.; Hoeck, H.; Stockhause, M.; Lautenschlager, M.

2014-12-01

The classical goals of a quality assessment system in the data life cycle are (1) to encourage data creators to improve their quality assessment procedures to reach the next quality level and (2) enable data consumers to decide, whether a dataset has a quality that is sufficient for usage in the target application, i.e. to appraise the data usability for their own purpose.As the data volumes of projects and the interdisciplinarity of data usage grow, the need for homogeneous structure and standardised notation of data and metadata increases. This third aspect is especially valid for the data repositories, as they manage data through machine agents. So checks for homogeneity and consistency in early parts of the workflow become essential to cope with today's data volumes.Selected parts of the workflow in the model intercomparison project CMIP5 and the archival of the data for the interdiscipliary user community of the IPCC-DDC AR5 and the associated quality checks are reviewed. We compare data and metadata checks and relate different types of checks to their positions in the data life cycle.The project's data citation approach is included in the discussion, with focus on temporal aspects of the time necessary to comply with the project's requirements for formal data citations and the demand for the availability of such data citations.In order to make different quality assessments of projects comparable, WDCC developed a generic Quality Assessment System. Based on the self-assessment approach of a maturity matrix, an objective and uniform quality level system for all data at WDCC is derived which consists of five maturity quality levels.

CheckM: assessing the quality of microbial genomes recovered from isolates, single cells, and metagenomes

PubMed Central

Parks, Donovan H.; Imelfort, Michael; Skennerton, Connor T.; Hugenholtz, Philip; Tyson, Gene W.

2015-01-01

Large-scale recovery of genomes from isolates, single cells, and metagenomic data has been made possible by advances in computational methods and substantial reductions in sequencing costs. Although this increasing breadth of draft genomes is providing key information regarding the evolutionary and functional diversity of microbial life, it has become impractical to finish all available reference genomes. Making robust biological inferences from draft genomes requires accurate estimates of their completeness and contamination. Current methods for assessing genome quality are ad hoc and generally make use of a limited number of “marker” genes conserved across all bacterial or archaeal genomes. Here we introduce CheckM, an automated method for assessing the quality of a genome using a broader set of marker genes specific to the position of a genome within a reference genome tree and information about the collocation of these genes. We demonstrate the effectiveness of CheckM using synthetic data and a wide range of isolate-, single-cell-, and metagenome-derived genomes. CheckM is shown to provide accurate estimates of genome completeness and contamination and to outperform existing approaches. Using CheckM, we identify a diverse range of errors currently impacting publicly available isolate genomes and demonstrate that genomes obtained from single cells and metagenomic data vary substantially in quality. In order to facilitate the use of draft genomes, we propose an objective measure of genome quality that can be used to select genomes suitable for specific gene- and genome-centric analyses of microbial communities. PMID:25977477

CheckM: assessing the quality of microbial genomes recovered from isolates, single cells, and metagenomes.

PubMed

Parks, Donovan H; Imelfort, Michael; Skennerton, Connor T; Hugenholtz, Philip; Tyson, Gene W

2015-07-01

Large-scale recovery of genomes from isolates, single cells, and metagenomic data has been made possible by advances in computational methods and substantial reductions in sequencing costs. Although this increasing breadth of draft genomes is providing key information regarding the evolutionary and functional diversity of microbial life, it has become impractical to finish all available reference genomes. Making robust biological inferences from draft genomes requires accurate estimates of their completeness and contamination. Current methods for assessing genome quality are ad hoc and generally make use of a limited number of "marker" genes conserved across all bacterial or archaeal genomes. Here we introduce CheckM, an automated method for assessing the quality of a genome using a broader set of marker genes specific to the position of a genome within a reference genome tree and information about the collocation of these genes. We demonstrate the effectiveness of CheckM using synthetic data and a wide range of isolate-, single-cell-, and metagenome-derived genomes. CheckM is shown to provide accurate estimates of genome completeness and contamination and to outperform existing approaches. Using CheckM, we identify a diverse range of errors currently impacting publicly available isolate genomes and demonstrate that genomes obtained from single cells and metagenomic data vary substantially in quality. In order to facilitate the use of draft genomes, we propose an objective measure of genome quality that can be used to select genomes suitable for specific gene- and genome-centric analyses of microbial communities. © 2015 Parks et al.; Published by Cold Spring Harbor Laboratory Press.

Check & Connect: The Importance of Relationships for Promoting Engagement with School

ERIC Educational Resources Information Center

Anderson, Amy R.; Christenson, Sandra L.; Sinclair, Mary F.; Lehr, Camilla A.

2004-01-01

The purpose of this study was to examine whether the closeness and quality of relationships between intervention staff and students involved in the Check & Connect program were associated with improved student engagement in school. Participants included 80 elementary and middle school students referred to the Check & Connect program for poor…

Rural-Urban Differences in Medicare Quality Outcomes and the Impact of Risk Adjustment.

PubMed

Henning-Smith, Carrie; Kozhimannil, Katy; Casey, Michelle; Prasad, Shailendra; Moscovice, Ira

2017-09-01

There has been considerable debate in recent years about whether, and how, to risk-adjust quality measures for sociodemographic characteristics. However, geographic location, especially rurality, has been largely absent from the discussion. To examine differences by rurality in quality outcomes, and the impact of adjustment for individual and community-level sociodemographic characteristics on quality outcomes. The 2012 Medicare Current Beneficiary Survey, Access to Care module, combined with the 2012 County Health Rankings. All data used were publicly available, secondary data. We merged the 2012 Medicare Current Beneficiary Survey data with the 2012 County Health Rankings data using county of residence. We compared 6 unadjusted quality of care measures for Medicare beneficiaries (satisfaction with care, blood pressure checked, cholesterol checked, flu shot receipt, change in health status, and all-cause annual readmission) by rurality (rural noncore, micropolitan, and metropolitan). We then ran nested multivariable logistic regression models to assess the impact of adjusting for community and individual-level sociodemographic characteristics to determine whether these mediate the rurality difference in quality of care. The relationship between rurality and change in health status was mediated by the inclusion of community-level characteristics; however, adjusting for community and individual-level characteristics caused differences by rurality to emerge in 2 of the measures: blood pressure checked and cholesterol checked. For all quality scores, model fit improved after adding community and individual characteristics. Quality is multifaceted and is impacted by individual and community-level socio-demographic characteristics, as well as by geographic location. Current debates about risk-adjustment procedures should take rurality into account.

SU-F-T-32: Evaluation of the Performance of a Multiple-Array-Diode Detector for Quality Assurance Tests in High-Dose-Rate Brachytherapy with Ir-192 Source

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harpool, K; De La Fuente Herman, T; Ahmad, S

Purpose: To evaluate the performance of a two-dimensional (2D) array-diode- detector for geometric and dosimetric quality assurance (QA) tests of high-dose-rate (HDR) brachytherapy with an Ir-192-source. Methods: A phantom setup was designed that encapsulated a two-dimensional (2D) array-diode-detector (MapCheck2) and a catheter for the HDR brachytherapy Ir-192 source. This setup was used to perform both geometric and dosimetric quality assurance for the HDR-Ir192 source. The geometric tests included: (a) measurement of the position of the source and (b) spacing between different dwell positions. The dosimteric tests include: (a) linearity of output with time, (b) end effect and (c) relative dosemore » verification. The 2D-dose distribution measured with MapCheck2 was used to perform the previous tests. The results of MapCheck2 were compared with the corresponding quality assurance testes performed with Gafchromic-film and well-ionization-chamber. Results: The position of the source and the spacing between different dwell-positions were reproducible within 1 mm accuracy by measuring the position of maximal dose using MapCheck2 in contrast to the film which showed a blurred image of the dwell positions due to limited film sensitivity to irradiation. The linearity of the dose with dwell times measured from MapCheck2 was superior to the linearity measured with ionization chamber due to higher signal-to-noise ratio of the diode readings. MapCheck2 provided more accurate measurement of the end effect with uncertainty < 1.5% in comparison with the ionization chamber uncertainty of 3%. Although MapCheck2 did not provide absolute calibration dosimeter for the activity of the source, it provided accurate tool for relative dose verification in HDR-brachytherapy. Conclusion: The 2D-array-diode-detector provides a practical, compact and accurate tool to perform quality assurance for HDR-brachytherapy with an Ir-192 source. The diodes in MapCheck2 have high radiation sensitivity and linearity that is superior to Gafchromic-films and ionization chamber used for geometric and dosimetric QA in HDR-brachytherapy, respectively.« less

40 CFR Appendix K to Part 75 - Quality Assurance and Operating Procedures for Sorbent Trap Monitoring Systems

Code of Federal Regulations, 2010 CFR

2010-07-01

... until the leak check is passed. Post-test leak check ≤4% of average sampling rate After sampling ** See... the test site. The sorbent media must be obtained from a source that can demonstrate the quality...-traceable calibration gas standards and reagents shall be used for the tests and procedures required under...

49 CFR 40.235 - What are the requirements for proper use and care of ASDs?

Code of Federal Regulations, 2014 CFR

2014-10-01

... ASD on the CPL. Your QAP must specify the methods used for quality control checks, temperatures at which the ASD must be stored and used, the shelf life of the device, and environmental conditions (e.g... the specified quality control checks or that has passed its expiration date. (e) As an employer, with...

49 CFR 40.235 - What are the requirements for proper use and care of ASDs?

Code of Federal Regulations, 2012 CFR

2012-10-01

... ASD on the CPL. Your QAP must specify the methods used for quality control checks, temperatures at which the ASD must be stored and used, the shelf life of the device, and environmental conditions (e.g... the specified quality control checks or that has passed its expiration date. (e) As an employer, with...

49 CFR 40.235 - What are the requirements for proper use and care of ASDs?

Code of Federal Regulations, 2011 CFR

2011-10-01

... ASD on the CPL. Your QAP must specify the methods used for quality control checks, temperatures at which the ASD must be stored and used, the shelf life of the device, and environmental conditions (e.g... the specified quality control checks or that has passed its expiration date. (e) As an employer, with...

49 CFR 40.235 - What are the requirements for proper use and care of ASDs?

Code of Federal Regulations, 2010 CFR

2010-10-01

... ASD on the CPL. Your QAP must specify the methods used for quality control checks, temperatures at which the ASD must be stored and used, the shelf life of the device, and environmental conditions (e.g... the specified quality control checks or that has passed its expiration date. (e) As an employer, with...

49 CFR 40.235 - What are the requirements for proper use and care of ASDs?

Code of Federal Regulations, 2013 CFR

2013-10-01

... ASD on the CPL. Your QAP must specify the methods used for quality control checks, temperatures at which the ASD must be stored and used, the shelf life of the device, and environmental conditions (e.g... the specified quality control checks or that has passed its expiration date. (e) As an employer, with...

FIELD CHECK MANUAL FOR LANGUAGE LABORATORIES, A SERIES OF TESTS WHICH A NON-TECHNICAL PERSON CAN CONDUCT TO VERIFY SPECIFICATIONS.

ERIC Educational Resources Information Center

GRITTNER, FRANK; PAVLAT, RUSSELL

IN ORDER TO ASSIST NON-TECHNICAL PEOPLE IN SCHOOLS TO CONDUCT A FIELD CHECK OF LANGUAGE LABORATORY EQUIPMENT BEFORE THEY MAKE FINAL PAYMENTS, THIS MANUAL OFFERS CRITERIA, TESTS, AND METHODS OF SCORING THE QUALITY OF THE EQUIPMENT. CHECKLISTS ARE PROVIDED FOR EVALUATING CONSOLE FUNCTIONS, TAPE RECORDERS, AMPLIFIERS, SOUND QUALITY (INCLUDING…

Design and performance of daily quality assurance system for carbon ion therapy at NIRS

NASA Astrophysics Data System (ADS)

Saotome, N.; Furukawa, T.; Hara, Y.; Mizushima, K.; Tansho, R.; Saraya, Y.; Shirai, T.; Noda, K.

2017-09-01

At National Institute of Radiological Sciences (NIRS), we have been commissioning a rotating-gantry system for carbon-ion radiotherapy. This rotating gantry can transport heavy ions at 430 MeV/u to an isocenter with irradiation angles of ±180° that can rotate around the patient so that the tumor can be irradiated from any direction. A three-dimensional pencil-beam scanning irradiation system equipped with the rotating gantry enables the optimal use of physical characteristics of carbon ions to provide accurate treatment. To ensure the treatment quality using such a complex system, the calibration of the primary dose monitor, output check, range check, dose rate check, machine safety check, and some mechanical tests should be performed efficiently. For this purpose, we have developed a measurement system dedicated for quality assurance (QA) of this gantry system: the Daily QA system. The system consists of an ionization chamber system and a scintillator system. The ionization chamber system is used for the calibration of the primary dose monitor, output check, and dose rate check, and the scintillator system is used for the range check, isocenter, and gantry angle. The performance of the Daily QA system was verified by a beam test. The stability of the output was within 0.5%, and the range was within 0.5 mm. The coincidence of the coordinates between the patient-positioning system and the irradiation system was verified using the Daily QA system. Our present findings verified that the new Daily QA system for a rotating gantry is capable of verifying the irradiation system with sufficient accuracy.

Kuipers during Glovebox Health Check in Columbus

NASA Image and Video Library

2012-05-18

ISS031-E-140314 (18 May 2012) --- European Space Agency astronaut Andre Kuipers, Expedition 31 flight engineer, supports a ground-conducted health check on ESA’s Biolab Glovebox in the Columbus laboratory of the International Space Station.

Kuipers during Glovebox Health Check in Columbus

NASA Image and Video Library

2012-05-18

ISS031-E-140311 (18 May 2012) --- European Space Agency astronaut Andre Kuipers, Expedition 31 flight engineer, supports a ground-conducted health check on ESA’s Biolab Glovebox in the Columbus laboratory of the International Space Station.

Kuipers during Glovebox Health Check in Columbus

NASA Image and Video Library

2012-05-18

ISS031-E-140316 (18 May 2012) --- European Space Agency astronaut Andre Kuipers, Expedition 31 flight engineer, supports a ground-conducted health check on ESA’s Biolab Glovebox in the Columbus laboratory of the International Space Station.

On quality control procedures for solar radiation and meteorological measures, from subhourly to montly average time periods

NASA Astrophysics Data System (ADS)

Espinar, B.; Blanc, P.; Wald, L.; Hoyer-Klick, C.; Schroedter-Homscheidt, M.; Wanderer, T.

2012-04-01

Meteorological data measured by ground stations are often a key element in the development and validation of methods exploiting satellite images. These data are considered as a reference against which satellite-derived estimates are compared. Long-term radiation and meteorological measurements are available from a large number of measuring stations. However, close examination of the data often reveals a lack of quality, often for extended periods of time. This lack of quality has been the reason, in many cases, of the rejection of large amount of available data. The quality data must be checked before their use in order to guarantee the inputs for the methods used in modelling, monitoring, forecast, etc. To control their quality, data should be submitted to several conditions or tests. After this checking, data that are not flagged by any of the test is released as a plausible data. In this work, it has been performed a bibliographical research of quality control tests for the common meteorological variables (ambient temperature, relative humidity and wind speed) and for the usual solar radiometrical variables (horizontal global and diffuse components of the solar radiation and the beam normal component). The different tests have been grouped according to the variable and the average time period (sub-hourly, hourly, daily and monthly averages). The quality test may be classified as follows: • Range checks: test that verify values are within a specific range. There are two types of range checks, those based on extrema and those based on rare observations. • Step check: test aimed at detecting unrealistic jumps or stagnation in the time series. • Consistency checks: test that verify the relationship between two or more time series. The gathered quality tests are applicable for all latitudes as they have not been optimized regionally nor seasonably with the aim of being generic. They have been applied to ground measurements in several geographic locations, what result in the detection of some control tests that are no longer adequate, due to different reasons. After the modification of some test, based in our experience, a set of quality control tests is now presented, updated according to technology advances and classified. The presented set of quality tests allows radiation and meteorological data to be tested in order to know their plausibility to be used as inputs in theoretical or empirical methods for scientific research. The research leading to those results has partly receive funding from the European Union's Seventh Framework Programme (FP7/2007-2013) under Grant Agreement no. 262892 (ENDORSE project).

Data services providing by the Ukrainian NODC (MHI NASU)

NASA Astrophysics Data System (ADS)

Eremeev, V.; Godin, E.; Khaliulin, A.; Ingerov, A.; Zhuk, E.

2009-04-01

At modern stage of the World Ocean study information support of investigation based on ad-vanced computer technologies becomes of particular importance. These abstracts are devoted to presentation of several data services developed in the Ukrainian NODC on the base of the Ma-rine Environmental and Information Technologies Department of MHI NASU. The Data Quality Control Service Using experience of international collaboration in the field of data collection and quality check we have developed the quality control (QC) software providing both preliminary(automatic) and expert(manual) data quality check procedures. The current version of the QC software works for the Mediterranean and Black seas and includes the climatic arrays for hydrological and few hydrochemical parameters based on such products as MEDAR/MEDATLAS II, Physical Oceanography of the Black Sea and Climatic Atlas of Oxygen and Hydrogen Sulfide in the Black sea. The data quality check procedure includes metadata control and hydrological and hydrochemical data control. Metadata control provides checking of duplicate cruises and pro-files, date and chronology, ship velocity, station location, sea depth and observation depth. Data QC procedure includes climatic (or range for parameters with small number of observations) data QC, density inversion check for hydrological data and searching for spikes. Using of cli-matic fields and profiles prepared by regional oceanography experts leads to more reliable results of data quality check procedure. The Data Access Services The Ukrainian NODC provides two products for data access - on-line software and data access module for the MHI NASU local net. This software allows select-ing data on rectangle area, on date, on months, on cruises. The result of query is metadata which are presented in the table and the visual presentation of stations on the map. It is possible to see both metadata and data. For this purpose it is necessary to select station in the table of metadata or on the map. There is also an opportunity to export data in ODV format. The product is avail-able on http://www.ocean.nodc.org.ua/DataAccess.php The local net version provides access to the oceanological database of the MHI NASU. The cur-rent version allows selecting data by spatial and temporal limits, depth, values of parameters, quality flags and works for the Mediterranean and Black seas. It provides visualization of meta-data and data, statistics of data selection, data export into several data formats. The Operational Data Management Services The collaborators of the MHI Experimental Branch developed a system of obtaining information on water pressure and temperature, as well as on atmospheric pressure. Sea level observations are also conducted. The obtained data are transferred online. The interface for operation data access was developed. It allows to select parameters (sea level, water temperature, atmospheric pressure, wind and wa-ter pressure) and time interval to see parameter graphics. The product is available on http://www.ocean.nodc.org.ua/Katsively.php . The Climatic products The current version of the Climatic Atlas includes maps on such pa-rameters as temperature, salinity, density, heat storage, dynamic heights, upper boundary of hy-drogen sulfide and lower boundary of oxygen for the Black sea basin. Maps for temperature, sa-linity, density were calculated on 19 standard depths and averaged monthly for depths 0 - 300 m and annually for lower depth values. The climatic maps of upper boundary of hydrogen sulfide and lower boundary of oxygen were averaged by decades from 20 till 90 of the XX century and by seasons. Two versions of climatic atlas viewer - on-line and desktop for presentation of the climatic maps were developed. They provide similar functions of selection and viewing maps by parameter, month and depth and saving maps in various formats. On-line version of atlas is available on http://www.ocean.nodc.org.ua/Main_Atlas.php .

Improvement of research quality in the fields of orthopaedics and trauma: a global perspective.

PubMed

Fayaz, Hangama C; Haas, Norbert; Kellam, James; Bavonratanavech, Suthorn; Parvizi, Javad; Dyer, George; Pohlemann, Tim; Jerosch, Jörg; Prommersberger, Karl-Josef; Pape, Hans Christoph; Smith, Malcolm; Vrahas, Marc; Perka, Carsten; Siebenrock, Klaus; Elhassan, Bassem; Moran, Christopher; Jupiter, Jesse B

2013-07-01

The international orthopaedic community aims to achieve the best possible outcome for patient care by constantly modifying surgical techniques and expanding the surgeon's knowledge. These efforts require proper reflection within a setting that necessitates a higher quality standard for global orthopaedic publication. Furthermore, these techniques demand that surgeons acquire information at a rapid rate while enforcing higher standards in research performance. An international consensus exists on how to perform research and what rules should be considered when publishing a scientific paper. Despite this global agreement, in today's "Cross Check Era", too many authors do not give attention to the current standards of systematic research. Thus, the purpose of this paper is to describe these performance standards, the available choices for orthopaedic surgeons and the current learning curve for seasoned teams of researchers and orthopaedic surgeons with more than three decades of experience. These lead to provide an accessible overview of all important aspects of the topics that will significantly influence the research development as we arrive at an important globalisation era in orthopaedics and trauma-related research.

KSC-01pp1478

NASA Image and Video Library

2001-08-10

KENNEDY SPACE CENTER, Fla. - Expedition Three Commander Frank Culbertson sends a greeting home while having his flight equipment checked before he enters Space Shuttle Discovery for launch. Helping him are (front) USA Mechanical Technician Al Schmidt and (back) NASA Quality Assurance Specialist Ken Strite. The payload on the STS-105 mission to the International Space Station includes the third flight of the Italian-built Multi-Purpose Logistics Module Leonardo, delivering additional scientific racks, equipment and supplies for the Space Station, and the Early Ammonia Servicer (EAS) tank. The EAS, which will be attached to the Station during two spacewalks, contains spare ammonia for the Station’s cooling system. Also, the Expedition Three crew is aboard to replace the Expedition Two crew on the International Space Station, who will be returning to Earth aboard Discovery after a five-month stay on the Station

The Automation of Nowcast Model Assessment Processes

DTIC Science & Technology

2016-09-01

that will automate real-time WRE-N model simulations, collect and quality control check weather observations for assimilation and verification, and...domains centered near White Sands Missile Range, New Mexico, where the Meteorological Sensor Array (MSA) will be located. The MSA will provide...observations and performing quality -control checks for the pre-forecast data assimilation period. 2. Run the WRE-N model to generate model forecast data

[The influence of the organizational structure on the internal controls of a foundation for cancer research, prevention and care in the interior of the state of São Paulo, Brazil].

PubMed

Bonacim, Carlos Alberto Grespam; Salgado, André Luís; Girioli, Lumila Souza; de Araujo, Adriana Maria Procópio

2011-05-01

This work focuses on a discussion about the extent to which the level of organizational structure interferes in the internal control practices of non-governmental organizations (NGOs), especially those related to health. The objective of this work was to observe the efficiency of the internal control tests applied within the organizational structure of the Foundation for Cancer Research, Prevention and Care, checking the reliability of the accounting records and operational controls. A case study in a third sector health organization was the chosen methodology. The case study involved company interviews and the analysis of confidential reports. After an evaluation of the organizational structure (of the relations between officials and volunteers) and the application of evaluation proceedings on the quality of the internal controls, the extent to which the organizational structure interferes with the internal control practices of the hospital was assessed. It was revealed that there are structured mechanisms of control in the institution, however the implementation of these controls is inadequately performed. It was further detected that the level of the organizational structure does indeed interfere in internal control practices at the entity.

The effectiveness of pretreatment physics plan review for detecting errors in radiation therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gopan, Olga; Zeng, Jing; Novak, Avrey

Purpose: The pretreatment physics plan review is a standard tool for ensuring treatment quality. Studies have shown that the majority of errors in radiation oncology originate in treatment planning, which underscores the importance of the pretreatment physics plan review. This quality assurance measure is fundamentally important and central to the safety of patients and the quality of care that they receive. However, little is known about its effectiveness. The purpose of this study was to analyze reported incidents to quantify the effectiveness of the pretreatment physics plan review with the goal of improving it. Methods: This study analyzed 522 potentiallymore » severe or critical near-miss events within an institutional incident learning system collected over a three-year period. Of these 522 events, 356 originated at a workflow point that was prior to the pretreatment physics plan review. The remaining 166 events originated after the pretreatment physics plan review and were not considered in the study. The applicable 356 events were classified into one of the three categories: (1) events detected by the pretreatment physics plan review, (2) events not detected but “potentially detectable” by the physics review, and (3) events “not detectable” by the physics review. Potentially detectable events were further classified by which specific checks performed during the pretreatment physics plan review detected or could have detected the event. For these events, the associated specific check was also evaluated as to the possibility of automating that check given current data structures. For comparison, a similar analysis was carried out on 81 events from the international SAFRON radiation oncology incident learning system. Results: Of the 356 applicable events from the institutional database, 180/356 (51%) were detected or could have been detected by the pretreatment physics plan review. Of these events, 125 actually passed through the physics review; however, only 38% (47/125) were actually detected at the review. Of the 81 events from the SAFRON database, 66/81 (81%) were potentially detectable by the pretreatment physics plan review. From the institutional database, three specific physics checks were particularly effective at detecting events (combined effectiveness of 38%): verifying the isocenter (39/180), verifying DRRs (17/180), and verifying that the plan matched the prescription (12/180). The most effective checks from the SAFRON database were verifying that the plan matched the prescription (13/66) and verifying the field parameters in the record and verify system against those in the plan (23/66). Software-based plan checking systems, if available, would have potential effectiveness of 29% and 64% at detecting events from the institutional and SAFRON databases, respectively. Conclusions: Pretreatment physics plan review is a key safety measure and can detect a high percentage of errors. However, the majority of errors that potentially could have been detected were not detected in this study, indicating the need to improve the pretreatment physics plan review performance. Suggestions for improvement include the automation of specific physics checks performed during the pretreatment physics plan review and the standardization of the review process.« less

The effectiveness of pretreatment physics plan review for detecting errors in radiation therapy.

PubMed

Gopan, Olga; Zeng, Jing; Novak, Avrey; Nyflot, Matthew; Ford, Eric

2016-09-01

The pretreatment physics plan review is a standard tool for ensuring treatment quality. Studies have shown that the majority of errors in radiation oncology originate in treatment planning, which underscores the importance of the pretreatment physics plan review. This quality assurance measure is fundamentally important and central to the safety of patients and the quality of care that they receive. However, little is known about its effectiveness. The purpose of this study was to analyze reported incidents to quantify the effectiveness of the pretreatment physics plan review with the goal of improving it. This study analyzed 522 potentially severe or critical near-miss events within an institutional incident learning system collected over a three-year period. Of these 522 events, 356 originated at a workflow point that was prior to the pretreatment physics plan review. The remaining 166 events originated after the pretreatment physics plan review and were not considered in the study. The applicable 356 events were classified into one of the three categories: (1) events detected by the pretreatment physics plan review, (2) events not detected but "potentially detectable" by the physics review, and (3) events "not detectable" by the physics review. Potentially detectable events were further classified by which specific checks performed during the pretreatment physics plan review detected or could have detected the event. For these events, the associated specific check was also evaluated as to the possibility of automating that check given current data structures. For comparison, a similar analysis was carried out on 81 events from the international SAFRON radiation oncology incident learning system. Of the 356 applicable events from the institutional database, 180/356 (51%) were detected or could have been detected by the pretreatment physics plan review. Of these events, 125 actually passed through the physics review; however, only 38% (47/125) were actually detected at the review. Of the 81 events from the SAFRON database, 66/81 (81%) were potentially detectable by the pretreatment physics plan review. From the institutional database, three specific physics checks were particularly effective at detecting events (combined effectiveness of 38%): verifying the isocenter (39/180), verifying DRRs (17/180), and verifying that the plan matched the prescription (12/180). The most effective checks from the SAFRON database were verifying that the plan matched the prescription (13/66) and verifying the field parameters in the record and verify system against those in the plan (23/66). Software-based plan checking systems, if available, would have potential effectiveness of 29% and 64% at detecting events from the institutional and SAFRON databases, respectively. Pretreatment physics plan review is a key safety measure and can detect a high percentage of errors. However, the majority of errors that potentially could have been detected were not detected in this study, indicating the need to improve the pretreatment physics plan review performance. Suggestions for improvement include the automation of specific physics checks performed during the pretreatment physics plan review and the standardization of the review process.

User's manual for computer program BASEPLOT

USGS Publications Warehouse

Sanders, Curtis L.

2002-01-01

The checking and reviewing of daily records of streamflow within the U.S. Geological Survey is traditionally accomplished by hand-plotting and mentally collating tables of data. The process is time consuming, difficult to standardize, and subject to errors in computation, data entry, and logic. In addition, the presentation of flow data on the internet requires more timely and accurate computation of daily flow records. BASEPLOT was developed for checking and review of primary streamflow records within the U.S. Geological Survey. Use of BASEPLOT enables users to (1) provide efficiencies during the record checking and review process, (2) improve quality control, (3) achieve uniformity of checking and review techniques of simple stage-discharge relations, and (4) provide a tool for teaching streamflow computation techniques. The BASEPLOT program produces tables of quality control checks and produces plots of rating curves and discharge measurements; variable shift (V-shift) diagrams; and V-shifts converted to stage-discharge plots, using data stored in the U.S. Geological Survey Automatic Data Processing System database. In addition, the program plots unit-value hydrographs that show unit-value stages, shifts, and datum corrections; input shifts, datum corrections, and effective dates; discharge measurements; effective dates for rating tables; and numeric quality control checks. Checklist/tutorial forms are provided for reviewers to ensure completeness of review and standardize the review process. The program was written for the U.S. Geological Survey SUN computer using the Statistical Analysis System (SAS) software produced by SAS Institute, Incorporated.

Quality in the molecular microbiology laboratory.

PubMed

Wallace, Paul S; MacKay, William G

2013-01-01

In the clinical microbiology laboratory advances in nucleic acid detection, quantification, and sequence analysis have led to considerable improvements in the diagnosis, management, and monitoring of infectious diseases. Molecular diagnostic methods are routinely used to make clinical decisions based on when and how to treat a patient as well as monitor the effectiveness of a therapeutic regime and identify any potential drug resistant strains that may impact on the long term patient treatment program. Therefore, confidence in the reliability of the result provided by the laboratory service to the clinician is essential for patient treatment. Hence, suitable quality assurance and quality control measures are important to ensure that the laboratory methods and service meet the necessary regulatory requirements both at the national and international level. In essence, the modern clinical microbiology laboratory ensures the appropriateness of its services through a quality management system that monitors all aspects of the laboratory service pre- and post-analytical-from patient sample receipt to reporting of results, from checking and upholding staff competency within the laboratory to identifying areas for quality improvements within the service offered. For most European based clinical microbiology laboratories this means following the common International Standard Organization (ISO9001) framework and ISO15189 which sets out the quality management requirements for the medical laboratory (BS EN ISO 15189 (2003) Medical laboratories-particular requirements for quality and competence. British Standards Institute, Bristol, UK). In the United States clinical laboratories performing human diagnostic tests are regulated by the Centers for Medicare and Medicaid Services (CMS) following the requirements within the Clinical Laboratory Improvement Amendments document 1988 (CLIA-88). This chapter focuses on the key quality assurance and quality control requirements within the modern microbiology laboratory providing molecular diagnostics.

Indicator Expansion with Analysis Pipeline

DTIC Science & Technology

2015-01-13

INTERNAL FILTER trackInfectedHosts FILTER badTraffic SIP infectedHosts 1 DAY END INTERNAL FILTER 11 Step 3 watch where infected hosts go FILTER...nonWhiteListPostInfected SIP IN LIST infectedHosts DIP NOT IN LIST safePopularIPs.set END FILTER 12 Step 4 & 5: Count Hosts Per IP and Alert EVALUATION...CHECK THRESHOLD DISTINCT SIP > 50 TIME WINDOW 36 HOURS END CHECK END EVALUATION 13 Step 6: Report Expanded Indicators LIST CONFIGURATION secondLevelIPs

Korzun checks the Rasteniya-2 plant growth experiment in the SM during Expedition Five

NASA Image and Video Library

2002-11-08

ISS005-E-20302 (8 November 2002) --- Cosmonaut Valery G. Korzun, Expedition Five mission commander, checks a plant growth experiment in the Zvezda Service Module on the International Space Station (ISS). Korzun represents Rosaviakosmos.

FRONT DETAIL OF RIGHT ENGINE AND WING. MECHANICS CHECK METAL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

FRONT DETAIL OF RIGHT ENGINE AND WING. MECHANICS CHECK METAL CHIP DETECTOR ON RIGHT ENGINE. THE LEADING EDGE FLAPS ON THE RIGHT WING ARE DOWN PRIOR TO LUBRICATION. - Greater Buffalo International Airport, Maintenance Hangar, Buffalo, Erie County, NY

Malenchenko checks Lada Greenhouse in SM

NASA Image and Video Library

2008-03-06

ISS016-E-031242 (6 March 2008) --- Cosmonaut Yuri I. Malenchenko, Expedition 16 flight engineer representing Russia's Federal Space Agency, checks the progress of pea plants growing in the Russian Lada greenhouse in the Zvezda Service Module of the International Space Station.

Plasma Crystal-3 Plus experiment Chamber Leak Check

NASA Image and Video Library

2010-07-01

ISS024-E-007144 (1 July 2010) --- Russian cosmonaut Alexander Skvortsov, Expedition 24 commander, performs chamber leak checks on the new Plasma Crystal-3 Plus experiment in the Poisk Mini-Research Module 2 (MRM2) of the International Space Station.

[Coronary artery bypass surgery: methods of performance monitoring and quality control].

PubMed

Albert, A; Sergeant, P; Ennker, J

2009-10-01

The strength of coronary bypass operations depends on the preservation of their benefits regarding freedom of symptoms, quality of life and survival, over decades. Significant variability of the results of an operative intervention according to the hospital or the operating surgeon is considered a weakness in the procedure. The external quality insurance tries to reach a transparent service providing market through hospital ranking comparability. Widely available information and competition will promote the improvement of the whole quality. The structured dialog acts as a control instrument for the BQS (Federal Quality Insurance). It is launched in case of deviations from the standard references or statistically significant differences between the results of the operations in any hospital and the average notational results. In comparison to the external control the hospital internal control has greater ability to reach a medically useful statement regarding the results of the treatment and to correct the mistakes in time. An online information portal based on a departmental databank (DataWarehouse, DataMart) is an attractive solution for the physician in order to get transparently and timely informed about the variability in the performance.The individual surgeon significantly influences the short- and long-term treatment results. Accordingly, selection, targeted training and performance measurements are necessary.Strict risk management and failure analysis of individual cases are included in the methods of internal quality control aiming to identify and correct the inadequacies in the system and the course of treatment. According to the international as well as our own experience, at least 30% of the mortalities after bypass operations are avoidable. A functioning quality control is especially important in minimally invasive interventions because they are often technically more demanding in comparison to the conventional procedures. In the field of OPCAB surgery, the special advantages of the procedure can be utilised to reach a nearly complete avoidance of postoperative stroke through combining the procedure with aorta no-touch technique. The long-term success of the bypass operation depends on the type of bypass material in additions to many other factors. Both internal mammary arteries are considered the most durable.Using an operation preparation check contributes to the operative success.

Payload Processing for Mice Drawer System

NASA Technical Reports Server (NTRS)

Brown, Judy

2007-01-01

Experimental payloads flown to the International Space Station provide us with valuable research conducted in a microgravity environment not attainable on earth. The Mice Drawer System is an experiment designed by Thales Alenia Space Italia to study the effects of microgravity on mice. It is designed to fly to orbit on the Space Shuttle Utilization Logistics Flight 2 in October 2008, remain onboard the International Space Station for approximately 100 days and then return to earth on a following Shuttle flight. The experiment apparatus will be housed inside a Double Payload Carrier. An engineering model of the Double Payload Carrier was sent to Kennedy Space Center for a fit check inside both Shuttles, and the rack that it will be installed in aboard the International Space Station. The Double Payload Carrier showed a good fit quality inside each vehicle, and Thales Alenia Space Italia will now construct the actual flight model and continue to prepare the Mice Drawer System experiment for launch.

Value of HIV patients with regular follow-up as in-house internal controls of flow cytometry measurement of lymphocyte subsets.

PubMed

de Carvalho Bittencourt, Marcelo; Kohler, Chantal; Henard, Sandrine; Rabaud, Christian; Béné, Marie C; Faure, Gilbert C

2013-01-01

Quality assessment in flow cytometry cannot obey the same rules as those applicable to the measurement of chemical analytes. However, regular follow-up of known patients may provide a robust in-house control of cell subsets evaluation. Sequential blood samples assessed for 32 HIV patients over several years and showing good stability were retrospectively assessed to establish coefficient of variations of the percentages of CD3+, CD4+, CD8+ cells, and CD4+ absolute counts (ACs). Mean relative standard variations for the whole cohort were of 0.04, 0.14, 0.08, and 0.18 for CD3%, CD4%, CD8%, and CD4 ACs, respectively. In-house follow-up of regularly checked compliant patients is a good alternative to traditional and costly repeatability and reproducibility studies for the validation of routine flow cytometry. © 2013 International Clinical Cytometry Society. Copyright © 2013 International Clinical Cytometry Society.

[Study of continuous quality improvement for clinical laboratory processes via the platform of Hospital Group].

PubMed

Song, Wenqi; Shen, Ying; Peng, Xiaoxia; Tian, Jian; Wang, Hui; Xu, Lili; Nie, Xiaolu; Ni, Xin

2015-05-26

The program of continuous quality improvement in clinical laboratory processes for complete blood count (CBC) was launched via the platform of Beijing Children's Hospital Group in order to improve the quality of pediatric clinical laboratories. Fifteen children's hospitals of Beijing Children's Hospital group were investigated using the method of Chinese adapted continuous quality improvement with PDCA (Plan-Do-Check-Action). The questionnaire survey and inter-laboratory comparison was conducted to find the existing problems, to analyze reasons, to set forth quality targets and to put them into practice. Then, targeted training was conducted to 15 children's hospitals and the second questionnaire survey, self examinations by the clinical laboratories was performed. At the same time, the Group's online internal quality control platform was established. Overall effects of the program were evaluated so that lay a foundation for the next stage of PDCA. Both quality of control system documents and CBC internal quality control scheme for all of clinical laboratories were improved through this program. In addition, standardization of performance verification was also improved, especially with the comparable verification rate of precision and internal laboratory results up to 100%. In terms of instrument calibration and mandatory diagnostic rates, only three out of the 15 hospitals (20%) failed to pass muster in 2014 from 46.67% (seven out of the 15 hospitals) in 2013. The abnormal data of intraday precision variance coefficients of the five CBC indicator parameters (WBC, RBC, Hb, Plt and Hct) of all the 15 laboratories accounted for 1.2% (2/165) in 2014, a marked decrease from 9.6% (14/145) in 2013. While the number of the hospitals using only one horizontal quality control object for daily quality control has dropped to three from five. The 15 hospitals organized a total of 263 times of training in 2014 from 101 times in 2013, up 160%. The quality improvement program for the clinical laboratories launched via the Hospital Group platform can promote the joint development of the pediatric clinical laboratory discipline of all the member hospitals with remarkable improvement results, and the experience is recommendable for further rollout.

[Validation of a German-language Version of the Body Checking Questionnaire (BCQ) in Adolescents with Anorexia and Bulimia Nervosa].

PubMed

Steinfeld, Beate; Bauer, Anika; Waldorf, Manuel; Engel, Nicole; Braks, Karsten; Huber, Thomas J; Vocks, Silja

2017-01-01

Body-related checking behavior, as a behavioral manifestation of a disturbed body image, fosters the development and maintenance of eating disorders. The Body Checking Questionnaire (BCQ) is the most commonly used questionnaire for measuring body-related checking behavior internationally. To date, validation studies are only available for adult populations. Therefore, the aim of this study was to statistically test the German-language version of the BCQ in adolescents. A total of N=129 female adolescents were examined, comprising n=57 with Anorexia Nervosa, n=24 with Bulimia Nervosa, and n=48 healthy female adolescents. A confirmatory factor analysis supports the subdivision of the BCQ into a general factor and the subfactors "overall appearance", "specific body parts" and "idiosyncratic checking", which was also found in the original version. The internal consistencies are good (α≥0.81), and the BCQ is able to differentiate well between adolescents with and without eating disorders. Significant correlations between the BCQ and other body image questionnaires point to a good convergent validity. The German-language BCQ thus constitutes a valid and reliable instrument for measuring body-related checking behavior among adolescents in clinical research and practice. © Georg Thieme Verlag KG Stuttgart · New York.

Health Checks in Primary Care for Adults with Intellectual Disabilities: How Extensive Should They Be?

ERIC Educational Resources Information Center

Chauhan, U.; Kontopantelis, E.; Campbell, S.; Jarrett, H.; Lester, H.

2010-01-01

Background: Routine health checks have gained prominence as a way of detecting unmet need in primary care for adults with intellectual disabilities (ID) and general practitioners are being incentivised in the UK to carry out health checks for many conditions through an incentivisation scheme known as the Quality and Outcomes Framework (QOF).…

Pollution of surface water in Europe

PubMed Central

Key, A.

1956-01-01

This paper discusses pollution of surface water in 18 European countries. For each an account is given of its physical character, population, industries, and present condition of water supplies; the legal, administrative, and technical means of controlling pollution are then described, and an outline is given of current research on the difficulties peculiar to each country. A general discussion of various aspects common to the European problem of water pollution follows; standards of quality are suggested; some difficulties likely to arise in the near future are indicated, and international collaboration, primarily by the exchange of information, is recommended to check or forestall these trends. PMID:13374532

DOE Office of Scientific and Technical Information (OSTI.GOV)

Covington, E; Younge, K; Chen, X

Purpose: To evaluate the effectiveness of an automated plan check tool to improve first-time plan quality as well as standardize and document performance of physics plan checks. Methods: The Plan Checker Tool (PCT) uses the Eclipse Scripting API to check and compare data from the treatment planning system (TPS) and treatment management system (TMS). PCT was created to improve first-time plan quality, reduce patient delays, increase efficiency of our electronic workflow, and to standardize and partially automate plan checks in the TPS. A framework was developed which can be configured with different reference values and types of checks. One examplemore » is the prescribed dose check where PCT flags the user when the planned dose and the prescribed dose disagree. PCT includes a comprehensive checklist of automated and manual checks that are documented when performed by the user. A PDF report is created and automatically uploaded into the TMS. Prior to and during PCT development, errors caught during plan checks and also patient delays were tracked in order to prioritize which checks should be automated. The most common and significant errors were determined. Results: Nineteen of 33 checklist items were automated with data extracted with the PCT. These include checks for prescription, reference point and machine scheduling errors which are three of the top six causes of patient delays related to physics and dosimetry. Since the clinical roll-out, no delays have been due to errors that are automatically flagged by the PCT. Development continues to automate the remaining checks. Conclusion: With PCT, 57% of the physics plan checklist has been partially or fully automated. Treatment delays have declined since release of the PCT for clinical use. By tracking delays and errors, we have been able to measure the effectiveness of automating checks and are using this information to prioritize future development. This project was supported in part by P01CA059827.« less

Twenty five years of beach monitoring in Hong Kong: A re-examination of the beach water quality classification scheme from a comparative and global perspective.

PubMed

Thoe, W; Lee, Olive H K; Leung, K F; Lee, T; Ashbolt, Nicholas J; Yang, Ron R; Chui, Samuel H K

2018-06-01

Hong Kong's beach water quality classification scheme, used effectively for >25 years in protecting public health, was first established in local epidemiology studies during the late 1980s where Escherichia coli (E. coli) was identified as the most suitable faecal indicator bacteria. To review and further substantiate the scheme's robustness, a performance check was carried out to classify water quality of 37 major local beaches in Hong Kong during four bathing seasons (March-October) from 2010 to 2013. Given the enterococci and E. coli data collected, beach classification by the local scheme was found to be in line with the prominent international benchmarks recommended by the World Health Organization and the European Union. Local bacteriological studies over the last 15 years further confirmed that E. coli is the more suitable faecal indicator bacteria than enterococci in the local context. Copyright © 2018 Elsevier Ltd. All rights reserved.

WEST ELEVATION OF USAIR MAINTENANCE HANGAR AT GREATER BUFFALO INTERNATIONAL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

WEST ELEVATION OF USAIR MAINTENANCE HANGAR AT GREATER BUFFALO INTERNATIONAL AIRPORT. A BOEING 737-200 HAS BEEN TOWED IN FOR AN OVERNIGHT (BALANCE) CHECK. THE TAIL DOCK STANDS ARE IN POSITION AT THE REAR OF THE AIRCRAFT TO FACILITATE INSPECTION. MAINTENANCE CREWS PERFORM NIGHTLY SERVICE ON UP TO 6 AIRCRAFT. THE NORMAL SEQUENCE OF 12 ROUTINE CHECKS COVERS SEVEN BASIC AREAS: INTERIOR, EXTERIOR, WINGS, LANDING GEAR, TAIL, AUXILIARY POWER UNIT (APU), AND ENGINES. THE WORK FORCE CONSISTS OF 5 INSPECTORS, 3 LEAD MECHANICS, AND 24 MECHANICS; NIGHTLY SCHEDULES ARE COORDINATED BY A PLANNER. - Greater Buffalo International Airport, Maintenance Hangar, Buffalo, Erie County, NY

Double checking: a second look

PubMed Central

Chreim, Samia; Forster, Alan

2015-01-01

Abstract Rationale, aims and objectives Double checking is a standard practice in many areas of health care, notwithstanding the lack of evidence supporting its efficacy. We ask in this study: ‘How do front line practitioners conceptualize double checking? What are the weaknesses of double checking? What alternate views of double checking could render it a more robust process?’ Method This is part of a larger qualitative study based on 85 semi‐structured interviews of health care practitioners in general internal medicine and obstetrics and neonatology; thematic analysis of the transcribed interviews was undertaken. Inductive and deductive themes are reported. Results Weaknesses in the double checking process include inconsistent conceptualization of double checking, double (or more) checking as a costly and time‐consuming procedure, double checking trusted as an accepted and stand‐alone process, and double checking as preventing reporting of near misses. Alternate views of double checking that would render it a more robust process include recognizing that double checking requires training and a dedicated environment, Introducing automated double checking, and expanding double checking beyond error detection. These results are linked with the concepts of collective efficiency thoroughness trade off (ETTO), an in‐family approach, and resilience. Conclusion(s) Double checking deserves more questioning, as there are limitations to the process. Practitioners could view double checking through alternate lenses, and thus help strengthen this ubiquitous practice that is rarely challenged. PMID:26568537

Kazbek Fit Check in the Soyuz TMA-11M

NASA Image and Video Library

2014-03-14

ISS39-E-001422 (14 March 2014) --- Expedition 39 Commander Koichi Wakata of the Japan Aerospace Exploration Agency (JAXA) is photographed during a fit check of the Kazbek couches in the Soyuz TMA-11M spacecraft, which is docked to the International Space Station.

Algorithm design for automated transportation photo enforcement camera image and video quality diagnostic check modules

NASA Astrophysics Data System (ADS)

Raghavan, Ajay; Saha, Bhaskar

2013-03-01

Photo enforcement devices for traffic rules such as red lights, toll, stops, and speed limits are increasingly being deployed in cities and counties around the world to ensure smooth traffic flow and public safety. These are typically unattended fielded systems, and so it is important to periodically check them for potential image/video quality problems that might interfere with their intended functionality. There is interest in automating such checks to reduce the operational overhead and human error involved in manually checking large camera device fleets. Examples of problems affecting such camera devices include exposure issues, focus drifts, obstructions, misalignment, download errors, and motion blur. Furthermore, in some cases, in addition to the sub-algorithms for individual problems, one also has to carefully design the overall algorithm and logic to check for and accurately classifying these individual problems. Some of these issues can occur in tandem or have the potential to be confused for each other by automated algorithms. Examples include camera misalignment that can cause some scene elements to go out of focus for wide-area scenes or download errors that can be misinterpreted as an obstruction. Therefore, the sequence in which the sub-algorithms are utilized is also important. This paper presents an overview of these problems along with no-reference and reduced reference image and video quality solutions to detect and classify such faults.

Tracing and control of raw materials sourcing for vaccine manufacturers.

PubMed

Faretra Peysson, Laurence

2010-05-01

The control of the raw materials used to manufacture vaccines is mandatory; therefore, a very clear process must be in place to guarantee that raw materials are traced. Those who make products or supplies used in vaccine manufacture (suppliers of culture media, diagnostic tests, etc.) must apply quality systems proving that they adhere to certain standards. ISO certification, Good Manufacturing Practices for production sites and the registration of culture media with a 'Certificate of Suitability' from the European Directorate for the Quality of Medicines and Healthcare are reliable quality systems pertaining to vaccine production. Suppliers must assure that each lot of raw materials used in a product that will be used in vaccine manufacture adheres to the level of safety and traceability required. Incoming materials must be controlled in a single 'Enterprise Resource Planning' system which is used to document important information, such as the assignment of lot number, expiration date, etc. Ingredients for culture media in particular must conform to certain specifications. The specifications that need to be checked vary according to the ingredient, based on the level of risk. The way a raw material is produced is also important, and any aspect relative to cross-contamination, such as the sanitary measures used in producing and storing the raw material must be checked as well. In addition, suppliers can reduce the risk of viral contamination of raw materials by avoiding purchases in countries where a relevant outbreak is currently declared. 2010 The International Association for Biologicals. Published by Elsevier Ltd. All rights reserved.

The swiss neonatal quality cycle, a monitor for clinical performance and tool for quality improvement

PubMed Central

2013-01-01

Background We describe the setup of a neonatal quality improvement tool and list which peer-reviewed requirements it fulfils and which it does not. We report on the so-far observed effects, how the units can identify quality improvement potential, and how they can measure the effect of changes made to improve quality. Methods Application of a prospective longitudinal national cohort data collection that uses algorithms to ensure high data quality (i.e. checks for completeness, plausibility and reliability), and to perform data imaging (Plsek’s p-charts and standardized mortality or morbidity ratio SMR charts). The collected data allows monitoring a study collective of very low birth-weight infants born from 2009 to 2011 by applying a quality cycle following the steps ′guideline – perform - falsify – reform′. Results 2025 VLBW live-births from 2009 to 2011 representing 96.1% of all VLBW live-births in Switzerland display a similar mortality rate but better morbidity rates when compared to other networks. Data quality in general is high but subject to improvement in some units. Seven measurements display quality improvement potential in individual units. The methods used fulfil several international recommendations. Conclusions The Quality Cycle of the Swiss Neonatal Network is a helpful instrument to monitor and gradually help improve the quality of care in a region with high quality standards and low statistical discrimination capacity. PMID:24074151

Discussion on the installation checking method of precast composite floor slab with lattice girders

NASA Astrophysics Data System (ADS)

Chen, Li; Jin, Xing; Wang, Yahui; Zhou, Hele; Gu, Jianing

2018-03-01

Based on the installation checking requirements of China’s current standards and the international norms for prefabricated structural precast components, it proposed an installation checking method for precast composite floor slab with lattice girders. By taking an equivalent composite beam consisted of a single lattice girder and the precast concrete slab as the checking object, compression instability stress of upper chords and yield stress of slab distribution reinforcement at the maximum positive moment, tensile yield stress of upper chords, slab normal section normal compression stress and shear instability stress of diagonal bars at the maximum negative moment were checked. And the bending stress and deflection of support beams, strength and compression stability bearing capacity of the vertical support, shear bearing capacity of the bolt and compression bearing capacity of steel tube wall at the bolt were checked at the same time. Every different checking object was given a specific load value and load combination. Application of installation checking method was given and testified by example.

Report: EPA's Fiscal Year 2015 Purchase Card and Convenience Check Program Assessed as Low Risk

EPA Pesticide Factsheets

Report #16-P-0124, March 29, 2016. We determined the EPA's purchase card and convenience check program for FY 2015 to be at a low risk for illegal, improper or erroneous purchases and payments due to strengthened internal controls.

STS-92 MS Wisoff gets suit checked in the White Room before launch

NASA Technical Reports Server (NTRS)

2000-01-01

STS-92 Mission Specialist Peter J.K. '''Jeff''' Wisoff reaches out to shake the hand of Danny Wyatt, KSC NASA Quality Assurance specialist, after completing final check of his launch and entry suit in the White Room before entering Discovery. The White Room is an environmentally controlled area at the end of the Orbiter Access Arm that provides entry to the orbiter as well as emergency egress if needed. The arm remains in the extended position until 7 minutes 24 seconds before launch. Wisoff and the rest of the crew are undertaking the fifth flight to the International Space Station for construction. Discovery carries a payload that includes the Integrated Truss Structure Z-1, first of 10 trusses that will form the backbone of the Space Station, and the third Pressurized Mating Adapter that will provide a Shuttle docking port for solar array installation on the sixth Station flight and Lab installation on the seventh Station flight. The mission includes four spacewalks for the construction activities. Discovery's landing is expected Oct. 22 at 2:10 p.m. EDT.

Impact of dose calibrators quality control programme in Argentina

NASA Astrophysics Data System (ADS)

Furnari, J. C.; de Cabrejas, M. L.; del C. Rotta, M.; Iglicki, F. A.; Milá, M. I.; Magnavacca, C.; Dima, J. C.; Rodríguez Pasqués, R. H.

1992-02-01

The national Quality Control (QC) programme for radionuclide calibrators started 12 years ago. Accuracy and the implementation of a QC programme were evaluated over all these years at 95 nuclear medicine laboratories where dose calibrators were in use. During all that time, the Metrology Group of CNEA has distributed 137Cs sealed sources to check stability and has been performing periodic "checking rounds" and postal surveys using unknown samples (external quality control). An account of the results of both methods is presented. At present, more of 65% of the dose calibrators measure activities with an error less than 10%.

A comparison of two tools to screen potentially inappropriate medication in internal medicine patients.

PubMed

Blanc, A-L; Spasojevic, S; Leszek, A; Théodoloz, M; Bonnabry, P; Fumeaux, T; Schaad, N

2018-04-01

Potentially inappropriate medication (PIM) is an important issue for inpatient management; it has been associated with safety problems, such as increases in adverse drugs events, and with longer hospital stays and higher healthcare costs. To compare two PIM-screening tools-STOPP/START and PIM-Check-applied to internal medicine patients. A second objective was to compare the use of PIMs in readmitted and non-readmitted patients. A retrospective observational study, in the general internal medicine ward of a Swiss non-university hospital. We analysed a random sample of 50 patients, hospitalized in 2013, whose readmission within 30 days of discharge had been potentially preventable, and compared them to a sample of 50 sex- and age-matched patients who were not readmitted. PIMs were screened using the STOPP/START tool, developed for geriatric patients, and the PIM-Check tool, developed for internal medicine patients. The time needed to perform each patient's analysis was measured. A clinical pharmacist counted and evaluated each PIM detected, based on its clinical relevance to the individual patient's case. The rates of screened and validated PIMs involving readmitted and non-readmitted patients were compared. Across the whole population, PIM-Check and STOPP/START detected 1348 and 537 PIMs, respectively, representing 13.5 and 5.4 PIMs/patient. Screening time was substantially shorter with PIM-Check than with STOPP/START (4 vs 10 minutes, respectively). The clinical pharmacist judged that 45% and 42% of the PIMs detected using PIM-Check and STOPP/START, respectively, were clinically relevant to individual patients' cases. No significant differences in the rates of detected and clinically relevant PIM were found between readmitted and non-readmitted patients. Internal medicine patients are frequently prescribed PIMs. PIM-Check's PIM detection rate was three times higher than STOPP/START's, and its screening time was shorter thanks to its electronic interface. Nearly half of the PIMs detected were judged to be non-clinically relevant, however, potentially overalerting the prescriber. These tools can, nevertheless, be considered useful in daily practice. Furthermore, the relevance of any PIM detected by these tools should always be carefully evaluated within the clinical context surrounding the individual patient. © 2017 John Wiley & Sons Ltd.

The influence of lathe check depth and orientation on the bond quality of phenol-formaldehyde-bonded birch plywood

Treesearch

Anti Rohumaa; Christopher G. Hunt; Mark Hughes; Charles R. Frihart; Janne Logren

2013-01-01

During the rotary peeling of veneer for plywood or the laminated veneer lumber manufacture, checks are formed in the veneer that are as deep as 70 – 80 % of the veneer thickness. The results of this study show that, during adhesive bond testing, deep lathe checks in birch (Betula pendula Roth.) veneer significantly reduce the shear strength and the...

Quality Control of Meteorological Observations

NASA Technical Reports Server (NTRS)

Collins, William; Dee, Dick; Rukhovets, Leonid

1999-01-01

For the first time, a problem of the meteorological observation quality control (QC) was formulated by L.S. Gandin at the Main Geophysical Observatory in the 70's. Later in 1988 L.S. Gandin began adapting his ideas in complex quality control (CQC) to the operational environment at the National Centers for Environmental Prediction. The CQC was first applied by L.S.Gandin and his colleagues to detection and correction of errors in rawinsonde heights and temperatures using a complex of hydrostatic residuals.Later, a full complex of residuals, vertical and horizontal optimal interpolations and baseline checks were added for the checking and correction of a wide range of meteorological variables. some other of Gandin's ideas were applied and substantially developed at other meteorological centers. A new statistical QC was recently implemented in the Goddard Data Assimilation System. The central component of any quality control is a buddy check which is a test of individual suspect observations against available nearby non-suspect observations. A novel feature of this test is that the error variances which are used for QC decision are re-estimated on-line. As a result, the allowed tolerances for suspect observations can depend on local atmospheric conditions. The system is then better able to accept extreme values observed in deep cyclones, jet streams and so on. The basic statements of this adaptive buddy check are described. Some results of the on-line QC including moisture QC are presented.

48 CFR 819.7112 - Internal controls.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Internal controls. 819... SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS VA Mentor-Protégé Program 819.7112 Internal controls. (a) OSDBU... Program objectives. OSDBU will establish internal controls as checks and balances applicable to the...

48 CFR 819.7112 - Internal controls.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Internal controls. 819... SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS VA Mentor-Protégé Program 819.7112 Internal controls. (a) OSDBU... Program objectives. OSDBU will establish internal controls as checks and balances applicable to the...

48 CFR 819.7112 - Internal controls.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Internal controls. 819... SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS VA Mentor-Protégé Program 819.7112 Internal controls. (a) OSDBU... Program objectives. OSDBU will establish internal controls as checks and balances applicable to the...

48 CFR 819.7112 - Internal controls.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Internal controls. 819... SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS VA Mentor-Protégé Program 819.7112 Internal controls. (a) OSDBU... Program objectives. OSDBU will establish internal controls as checks and balances applicable to the...

Quality Measurement Recommendations Relevant to Clinical Guidelines in Germany and the United Kingdom: (What) Can We Learn From Each Other?

PubMed Central

Petzold, Thomas; Deckert, Stefanie; Williamson, Paula R.; Schmitt, Jochen

2018-01-01

We conducted a systematic review of clinical guidelines (CGs) to examine the methodological approaches of quality indicator derivation in CGs, the frequency of quality indicators to check CG recommendations in routine care, and clinimetric properties of quality indicators. We analyzed the publicly available CG databases of the Association of the Scientific Medical Societies in Germany (AWMF) and National Institute for Health and Care Excellence (NICE). Data on the methodology of subsequent quality indicator derivation, the content and definition of recommended quality indicators, and clinimetric properties of measurement instruments were extracted. In Germany, no explicit methodological guidance exists, but 3 different approaches are used. For NICE, a general approach is used for the derivation of quality indicators out of quality standards. Quality indicators were defined in 34 out of 87 CGs (39%) in Germany and for 58 out of 133 (43%) NICE CGs. Statements regarding measurement properties of instruments for quality indicator assessment were missing in German and NICE documents. Thirteen pairs of CGs (32%) have associated quality indicators. Thirty-four quality indicators refer to the same aspect of the quality of care, which corresponds to 27% of the German and 7% of NICE quality indicators. The development of a standardized and internationally accepted methodology for the derivation of quality indicators relevant to CGs is needed to measure and compare quality of care in health care systems. PMID:29591538

Helping You Choose Quality Ambulatory Care

MedlinePlus

Helping you choose: Quality ambulatory care When you need ambulatory care, you should find out some information to help you choose the best ... the center follows rules for patient safety and quality. Go to Quality Check ® at www. qualitycheck. org ...

Helping You Choose Quality Hospice Care

MedlinePlus

Helping you choose: Quality hospice care When you need hospice care, you should find out some information to help you choose the best ... the service follows rules for patient safety and quality. Go to Quality Check ® at www. qualitycheck. org ...

Expedition 18 Suit Pressure Check

NASA Image and Video Library

2008-10-11

Expedition 18 Commander Michael Fincke has his Russian Sokol suit pressure checked prior to launching in the Soyuz TMA-13 spacecraft with Expedition 18 Flight Engineer Yuri V. Lonchakov and American spaceflight participant Richard Garriott, Sunday, Oct. 12, 2008 from the Baikonur Cosmodrome in Kazakhstan. The three crew members are scheduled to dock with the International Space Station on Oct. 14. Fincke and Lonchakov will spend six months on the station, while Garriott will return to Earth Oct. 24 with two of the Expedition 17 crew members currently on the International Space Station. Photo Credit: (NASA/Bill Ingalls)

Expedition 18 Suit Pressure Check

NASA Image and Video Library

2008-10-11

American Spaceflight Participant Richard Garriott has his Russian Sokol suit pressure checked prior to launching in the Soyuz TMA-13 spacecraft with Expedition 18 Commander Michael Fincke and Flight Engineer Yury V. Lonchakov, Sunday, Oct. 12, 2008 from the Baikonur Cosmodrome in Kazakhstan. The three crew members are scheduled to dock with the International Space Station on Oct. 14. Fincke and Lonchakov will spend six months on the station, while Garriott will return to Earth Oct. 24, 2008 with two of the Expedition 17 crewmembers currently on the International Space Station. Photo Credit: (NASA/Bill Ingalls)

Quality Measures in Pre-Analytical Phase of Tissue Processing: Understanding Its Value in Histopathology.

PubMed

Rao, Shalinee; Masilamani, Suresh; Sundaram, Sandhya; Duvuru, Prathiba; Swaminathan, Rajendiran

2016-01-01

Quality monitoring in histopathology unit is categorized into three phases, pre-analytical, analytical and post-analytical, to cover various steps in the entire test cycle. Review of literature on quality evaluation studies pertaining to histopathology revealed that earlier reports were mainly focused on analytical aspects with limited studies on assessment of pre-analytical phase. Pre-analytical phase encompasses several processing steps and handling of specimen/sample by multiple individuals, thus allowing enough scope for errors. Due to its critical nature and limited studies in the past to assess quality in pre-analytical phase, it deserves more attention. This study was undertaken to analyse and assess the quality parameters in pre-analytical phase in a histopathology laboratory. This was a retrospective study done on pre-analytical parameters in histopathology laboratory of a tertiary care centre on 18,626 tissue specimens received in 34 months. Registers and records were checked for efficiency and errors for pre-analytical quality variables: specimen identification, specimen in appropriate fixatives, lost specimens, daily internal quality control performance on staining, performance in inter-laboratory quality assessment program {External quality assurance program (EQAS)} and evaluation of internal non-conformities (NC) for other errors. The study revealed incorrect specimen labelling in 0.04%, 0.01% and 0.01% in 2007, 2008 and 2009 respectively. About 0.04%, 0.07% and 0.18% specimens were not sent in fixatives in 2007, 2008 and 2009 respectively. There was no incidence of specimen lost. A total of 113 non-conformities were identified out of which 92.9% belonged to the pre-analytical phase. The predominant NC (any deviation from normal standard which may generate an error and result in compromising with quality standards) identified was wrong labelling of slides. Performance in EQAS for pre-analytical phase was satisfactory in 6 of 9 cycles. A low incidence of errors in pre-analytical phase implies that a satisfactory level of quality standards was being practiced with still scope for improvement.

Quality control system preparation for photogrammetric and laser scanning missions of Spanish national plan of aerial orthophotogpaphy (PNOA). (Polish Title: Opracowanie systemu kontroli jakości realizacji nalotów fotogrametrycznych i skaningowych dla hiszpańskiego narodowego planu ortofotomapy lotniczej (PNOA))

NASA Astrophysics Data System (ADS)

Rzonca, A.

2013-12-01

The paper presents the state of the art of quality control of photogrammetric and laser scanning data captured by airborne sensors. The described subject is very important for photogrammetric and LiDAR project execution, because the data quality a prior decides about the final product quality. On the other hand, precise and effective quality control process allows to execute the missions without wide margin of safety, especially in case of the mountain areas projects. For introduction, the author presents theoretical background of the quality control, basing on his own experience, instructions and technical documentation. He describes several variants of organization solutions. Basically, there are two main approaches: quality control of the captured data and the control of discrepancies of the flight plan and its results of its execution. Both of them are able to use test of control and analysis of the data. The test is an automatic algorithm controlling the data and generating the control report. Analysis is a less complicated process, that is based on documentation, data and metadata manual check. The example of quality control system for large area project was presented. The project is being realized periodically for the territory of all Spain and named National Plan of Aerial Orthophotography (Plan Nacional de Ortofotografía Aérea, PNOA). The system of the internal control guarantees its results soon after the flight and informs the flight team of the company. It allows to correct all the errors shortly after the flight and it might stop transferring the data to another team or company, for further data processing. The described system of data quality control contains geometrical and radiometrical control of photogrammetric data and geometrical control of LiDAR data. According to all specified parameters, it checks all of them and generates the reports. They are very helpful in case of some errors or low quality data. The paper includes the author experience in the field of data quality control, presents the conclusions and suggestions of the organization and technical aspects, with a short definition of the necessary control software.

Technical Note: Development and performance of a software tool for quality assurance of online replanning with a conventional Linac or MR-Linac.

PubMed

Chen, Guang-Pei; Ahunbay, Ergun; Li, X Allen

2016-04-01

To develop an integrated quality assurance (QA) software tool for online replanning capable of efficiently and automatically checking radiation treatment (RT) planning parameters and gross plan quality, verifying treatment plan data transfer from treatment planning system (TPS) to record and verify (R&V) system, performing a secondary monitor unit (MU) calculation with or without a presence of a magnetic field from MR-Linac, and validating the delivery record consistency with the plan. The software tool, named ArtQA, was developed to obtain and compare plan and treatment parameters from both the TPS and the R&V system database. The TPS data are accessed via direct file reading and the R&V data are retrieved via open database connectivity and structured query language. Plan quality is evaluated with both the logical consistency of planning parameters and the achieved dose-volume histograms. Beams in between the TPS and R&V system are matched based on geometry configurations. To consider the effect of a 1.5 T transverse magnetic field from MR-Linac in the secondary MU calculation, a method based on modified Clarkson integration algorithm was developed and tested for a series of clinical situations. ArtQA has been used in their clinic and can quickly detect inconsistencies and deviations in the entire RT planning process. With the use of the ArtQA tool, the efficiency for plan check including plan quality, data transfer, and delivery check can be improved by at least 60%. The newly developed independent MU calculation tool for MR-Linac reduces the difference between the plan and calculated MUs by 10%. The software tool ArtQA can be used to perform a comprehensive QA check from planning to delivery with conventional Linac or MR-Linac and is an essential tool for online replanning where the QA check needs to be performed rapidly.

Technical Note: Development and performance of a software tool for quality assurance of online replanning with a conventional Linac or MR-Linac

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Guang-Pei, E-mail: gpchen@mcw.edu; Ahunbay, Ergun; Li, X. Allen

Purpose: To develop an integrated quality assurance (QA) software tool for online replanning capable of efficiently and automatically checking radiation treatment (RT) planning parameters and gross plan quality, verifying treatment plan data transfer from treatment planning system (TPS) to record and verify (R&V) system, performing a secondary monitor unit (MU) calculation with or without a presence of a magnetic field from MR-Linac, and validating the delivery record consistency with the plan. Methods: The software tool, named ArtQA, was developed to obtain and compare plan and treatment parameters from both the TPS and the R&V system database. The TPS data aremore » accessed via direct file reading and the R&V data are retrieved via open database connectivity and structured query language. Plan quality is evaluated with both the logical consistency of planning parameters and the achieved dose–volume histograms. Beams in between the TPS and R&V system are matched based on geometry configurations. To consider the effect of a 1.5 T transverse magnetic field from MR-Linac in the secondary MU calculation, a method based on modified Clarkson integration algorithm was developed and tested for a series of clinical situations. Results: ArtQA has been used in their clinic and can quickly detect inconsistencies and deviations in the entire RT planning process. With the use of the ArtQA tool, the efficiency for plan check including plan quality, data transfer, and delivery check can be improved by at least 60%. The newly developed independent MU calculation tool for MR-Linac reduces the difference between the plan and calculated MUs by 10%. Conclusions: The software tool ArtQA can be used to perform a comprehensive QA check from planning to delivery with conventional Linac or MR-Linac and is an essential tool for online replanning where the QA check needs to be performed rapidly.« less

Variations in Daily Sleep Quality and Type 1 Diabetes Management in Late Adolescents

PubMed Central

Queen, Tara L.; Butner, Jonathan; Wiebe, Deborah; Berg, Cynthia A.

2016-01-01

Objective To determine how between- and within-person variability in perceived sleep quality were associated with adolescent diabetes management. Methods A total of 236 older adolescents with type 1 diabetes reported daily for 2 weeks on sleep quality, self-regulatory failures, frequency of blood glucose (BG) checks, and BG values. Average, inconsistent, and daily deviations in sleep quality were examined. Results Hierarchical linear models indicated that poorer average and worse daily perceived sleep quality (compared with one’s average) was each associated with more self-regulatory failures. Sleep quality was not associated with frequency of BG checking. Poorer average sleep quality was related to greater risk of high BG. Furthermore, inconsistent and daily deviations in sleep quality interacted to predict higher BG, with more consistent sleepers benefitting more from a night of high-quality sleep. Conclusions Good, consistent sleep quality during late adolescence may benefit diabetes management by reducing self-regulatory failures and risk of high BG. PMID:26994852

An MS-DOS-based program for analyzing plutonium gamma-ray spectra

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ruhter, W.D.; Buckley, W.M.

1989-09-07

A plutonium gamma-ray analysis system that operates on MS-DOS-based computers has been developed for the International Atomic Energy Agency (IAEA) to perform in-field analysis of plutonium gamma-ray spectra for plutonium isotopics. The program titled IAEAPU consists of three separate applications: a data-transfer application for transferring spectral data from a CICERO multichannel analyzer to a binary data file, a data-analysis application to analyze plutonium gamma-ray spectra, for plutonium isotopic ratios and weight percents of total plutonium, and a data-quality assurance application to check spectral data for proper data-acquisition setup and performance. Volume 3 contains the software listings for these applications.

Lot quality assurance sampling of sputum acid-fast bacillus smears for assessing sputum smear microscopy centers.

PubMed

Selvakumar, N; Murthy, B N; Prabhakaran, E; Sivagamasundari, S; Vasanthan, Samuel; Perumal, M; Govindaraju, R; Chauhan, L S; Wares, Fraser; Santha, T; Narayanan, P R

2005-02-01

Assessment of 12 microscopy centers in a tuberculosis unit by blinded checking of eight sputum smears selected by using a lot quality assurance sampling (LQAS) method and by unblinded checking of all positive and five negative slides, among the slides examined in a month in a microscopy centre, revealed that the LQAS method can be implemented in the field to monitor the performance of acid-fast bacillus microscopy centers in national tuberculosis control programs.

Lot Quality Assurance Sampling of Sputum Acid-Fast Bacillus Smears for Assessing Sputum Smear Microscopy Centers

PubMed Central

Selvakumar, N.; Murthy, B. N.; Prabhakaran, E.; Sivagamasundari, S.; Vasanthan, Samuel; Perumal, M.; Govindaraju, R.; Chauhan, L. S.; Wares, Fraser; Santha, T.; Narayanan, P. R.

2005-01-01

Assessment of 12 microscopy centers in a tuberculosis unit by blinded checking of eight sputum smears selected by using a lot quality assurance sampling (LQAS) method and by unblinded checking of all positive and five negative slides, among the slides examined in a month in a microscopy centre, revealed that the LQAS method can be implemented in the field to monitor the performance of acid-fast bacillus microscopy centers in national tuberculosis control programs. PMID:15695704

Lake water quality mapping from Landsat

NASA Technical Reports Server (NTRS)

Scherz, J. P.

1977-01-01

In the project described remote sensing was used to check the quality of lake waters. The lakes of three Landsat scenes were mapped with the Bendix MDAS multispectral analysis system. From the MDAS color coded maps, the lake with the worst algae problem was easily located. The lake was closely checked, and the presence of 100 cows in the springs which fed the lake could be identified as the pollution source. The laboratory and field work involved in the lake classification project is described.

Member Checking: A Tool to Enhance Trustworthiness or Merely a Nod to Validation?

PubMed

Birt, Linda; Scott, Suzanne; Cavers, Debbie; Campbell, Christine; Walter, Fiona

2016-06-22

The trustworthiness of results is the bedrock of high quality qualitative research. Member checking, also known as participant or respondent validation, is a technique for exploring the credibility of results. Data or results are returned to participants to check for accuracy and resonance with their experiences. Member checking is often mentioned as one in a list of validation techniques. This simplistic reporting might not acknowledge the value of using the method, nor its juxtaposition with the interpretative stance of qualitative research. In this commentary, we critique how member checking has been used in published research, before describing and evaluating an innovative in-depth member checking technique, Synthesized Member Checking. The method was used in a study with patients diagnosed with melanoma. Synthesized Member Checking addresses the co-constructed nature of knowledge by providing participants with the opportunity to engage with, and add to, interview and interpreted data, several months after their semi-structured interview. © The Author(s) 2016.

42 CFR 493.1254 - Standard: Maintenance and function checks.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Standard: Maintenance and function checks. 493.1254 Section 493.1254 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS Quality System for Nonwaived...

An Adaptive Buddy Check for Observational Quality Control

NASA Technical Reports Server (NTRS)

Dee, Dick P.; Rukhovets, Leonid; Todling, Ricardo; DaSilva, Arlindo M.; Larson, Jay W.; Einaudi, Franco (Technical Monitor)

2000-01-01

An adaptive buddy check algorithm is presented that adjusts tolerances for outlier observations based on the variability of surrounding data. The algorithm derives from a statistical hypothesis test combined with maximum-likelihood covariance estimation. Its stability is shown to depend on the initial identification of outliers by a simple background check. The adaptive feature ensures that the final quality control decisions are not very sensitive to prescribed statistics of first-guess and observation errors, nor on other approximations introduced into the algorithm. The implementation of the algorithm in a global atmospheric data assimilation is described. Its performance is contrasted with that of a non-adaptive buddy check, for the surface analysis of an extreme storm that took place in Europe on 27 December 1999. The adaptive algorithm allowed the inclusion of many important observations that differed greatly from the first guess and that would have been excluded on the basis of prescribed statistics. The analysis of the storm development was much improved as a result of these additional observations.

Coleman performs VO2 Max PFS Software Calibrations and Instrument Check

NASA Image and Video Library

2011-02-24

ISS026-E-029180 (24 Feb. 2011) --- NASA astronaut Catherine (Cady) Coleman, Expedition 26 flight engineer, performs VO2max portable Pulmonary Function System (PFS) software calibrations and instrument check while using the Cycle Ergometer with Vibration Isolation System (CEVIS) in the Destiny laboratory of the International Space Station.

Beyond Member-Checking: A Dialogic Approach to the Research Interview

ERIC Educational Resources Information Center

Harvey, Lou

2015-01-01

This article presents a dialogic qualitative interview design for a narrative study of six international UK university students' motivation for learning English. Based on the work of Mikhail Bakhtin, this design was developed in order to address the limitations of member-checking [Lincoln, Y. S., and E. G. Guba. 1985. "Naturalistic…

Reiter conducts a fit check of the Kazbek couches in the Soyuz TMA-8/12S

NASA Image and Video Library

2006-07-26

ISS013-E-60768 (26 July 2006) --- Attired in a Russian Sokol launch and entry suit, European Space Agency (ESA) astronaut Thomas Reiter, Expedition 13 flight engineer, participates in a Kazbek couch fit check in the TMA-8 Soyuz spacecraft docked to the International Space Station.

[New idea of traditional Chinese medicine quality control based on "composition structure" theory].

PubMed

Liu, Dan; Jia, Xiaobin; Yu, Danhong

2012-03-01

On the road of the modern Chinese medicine developing internationally, there is a key issues that setting up a reasonable, accurate and be quantified quality evaluation system which is comply with the basic theory of Chinese medicine. Based on the overall understanding of the role of traditional Chinese medicine components, author suggested that the idea of "structural components" theory should be embedded into the system and thought the Chinese medicine play a multi-target, multi-channel pharmacodynamic effects founded on the specific microcosmic structural relationship between the components and the components within the group. At present, the way of Chinese pharmacopoeia checking the quality of Chinese medicine is mainly depends on controlling the single or multiple targets of ingredients. In fact, this way is out of the overall effectiveness of the Chinese medicine, so we can not thoroughly controlling the quality of Chinese medicine from the essence of the Chinese medicine. Secondly, it's only macro-structural quantity that the Chinese pharmacopoeia just controlling the less effective ingredients, this is not enough to reflect the internal microstructure of the integrity and systematic. In other words, this cannot reflect the structural components of the Chinese medicine (the essence of traditional Chinese medicine). In view of above mentioned reasons, the author propose the new idea on the quality control in the medicine that quantify the ratio structural relationship in component and the ingredients of the components, set the optimal controlling proportion between the components and ingredients. At the same time, author thought we should conduct the depth study in the micro-quantified the multi-component and multi-ingredient, in the process of studying the material basis of Chinese medicine. Therefore, it could establish a more rational basis for the Chinese medicine quality controlling system.

48 CFR 719.273-10 - Internal controls.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Internal controls. 719.273...égé Program 719.273-10 Internal controls. (a) OSDBU will oversee the Program and will work in... objectives. OSDBU will establish internal controls as checks and balances applicable to the Program. These...

48 CFR 719.273-10 - Internal controls.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Internal controls. 719.273...égé Program 719.273-10 Internal controls. (a) OSDBU will oversee the Program and will work in... objectives. OSDBU will establish internal controls as checks and balances applicable to the Program. These...

48 CFR 719.273-10 - Internal controls.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Internal controls. 719.273...égé Program 719.273-10 Internal controls. (a) OSDBU will oversee the Program and will work in... objectives. OSDBU will establish internal controls as checks and balances applicable to the Program. These...

48 CFR 719.273-10 - Internal controls.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Internal controls. 719.273...égé Program 719.273-10 Internal controls. (a) OSDBU will oversee the Program and will work in... objectives. OSDBU will establish internal controls as checks and balances applicable to the Program. These...

40 CFR 51.359 - Quality control.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 2 2014-07-01 2014-07-01 false Quality control. 51.359 Section 51.359 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS REQUIREMENTS FOR... to assure test accuracy. Computer control of quality assurance checks and quality control charts...

Safe and effective nursing shift handover with NURSEPASS: An interrupted time series.

PubMed

Smeulers, Marian; Dolman, Christine D; Atema, Danielle; van Dieren, Susan; Maaskant, Jolanda M; Vermeulen, Hester

2016-11-01

Implementation of a locally developed evidence based nursing shift handover blueprint with a bedside-safety-check to determine the effect size on quality of handover. A mixed methods design with: (1) an interrupted time series analysis to determine the effect on handover quality in six domains; (2) descriptive statistics to analyze the intercepted discrepancies by the bedside-safety-check; (3) evaluation sessions to gather experiences with the new handover process. We observed a continued trend of improvement in handover quality and a significant improvement in two domains of handover: organization/efficiency and contents. The bedside-safety-check successfully identified discrepancies on drains, intravenous medications, bandages or general condition and was highly appreciated. Use of the nursing shift handover blueprint showed promising results on effectiveness as well as on feasibility and acceptability. However, to enable long term measurement on effectiveness, evaluation with large scale interrupted times series or statistical process control is needed. Copyright © 2016 Elsevier Inc. All rights reserved.

77 FR 67344 - Proposed Information Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-09

... Criminal History Checks. DATES: Written comments must be submitted to the individual and office listed in... methodology and assumptions used; Enhance the quality, utility, and clarity of the information to be collected... Criminal History Check. CNCS and its grantees must ensure that national service beneficiaries are protected...

The advanced qualtiy control techniques planned for the Internation Soil Moisture Network

NASA Astrophysics Data System (ADS)

Xaver, A.; Gruber, A.; Hegiova, A.; Sanchis-Dufau, A. D.; Dorigo, W. A.

2012-04-01

In situ soil moisture observations are essential to evaluate and calibrate modeled and remotely sensed soil moisture products. Although a number of meteorological networks and field campaigns measuring soil moisture exist on a global and long-term scale, their observations are not easily accessible and lack standardization of both technique and protocol. Thus, handling and especially comparing these datasets with satellite products or land surface models is a demanding issue. To overcome these limitations the International Soil Moisture Network (ISMN; http://www.ipf.tuwien.ac.at/insitu/) has been initiated to act as a centralized data hosting facility. One advantage of the ISMN is that users are able to access the harmonized datasets easily through a web portal. Another advantage is the fully automated processing chain including the data harmonization in terms of units and sampling interval, but even more important is the advanced quality control system each measurement has to run through. The quality of in situ soil moisture measurements is crucial for the validation of satellite- and model-based soil moisture retrievals; therefore a sophisticated quality control system was developed. After a check for plausibility and geophysical limits a quality flag is added to each measurement. An enhanced flagging mechanism was recently defined using a spectrum based approach to detect spurious spikes, jumps and plateaus. The International Soil Moisture Network has already evolved to one of the most important distribution platforms for in situ soil moisture observations and is still growing. Currently, data from 27 networks in total covering more than 800 stations in Europe, North America, Australia, Asia and Africa is hosted by the ISMN. Available datasets also include historical datasets as well as near real-time measurements. The improved quality control system will provide important information for satellite-based as well as land surface model-based validation studies.

Langley Wind Tunnel Data Quality Assurance-Check Standard Results

NASA Technical Reports Server (NTRS)

Hemsch, Michael J.; Grubb, John P.; Krieger, William B.; Cler, Daniel L.

2000-01-01

A framework for statistical evaluation, control and improvement of wind funnel measurement processes is presented The methodology is adapted from elements of the Measurement Assurance Plans developed by the National Bureau of Standards (now the National Institute of Standards and Technology) for standards and calibration laboratories. The present methodology is based on the notions of statistical quality control (SQC) together with check standard testing and a small number of customer repeat-run sets. The results of check standard and customer repeat-run -sets are analyzed using the statistical control chart-methods of Walter A. Shewhart long familiar to the SQC community. Control chart results are presented for. various measurement processes in five facilities at Langley Research Center. The processes include test section calibration, force and moment measurements with a balance, and instrument calibration.

Managed aquifer recharge by a check dam to improve the quality of fluoride-rich groundwater: a case study from southern India.

PubMed

Gowrisankar, G; Jagadeshan, G; Elango, L

2017-04-01

In many regions around the globe, including India, degradation in the quality of groundwater is of great concern. The objective of this investigation is to determine the effect of recharge from a check dam on quality of groundwater in a region of Krishnagiri District of Tamil Nadu State, India. For this study, water samples from 15 wells were periodically obtained and analysed for major ions and fluoride concentrations. The amount of major ions present in groundwater was compared with the drinking water guideline values of the Bureau of Indian Standards. With respect to the sodium and fluoride concentrations, 38% of groundwater samples collected was not suitable for direct use as drinking water. Suitability of water for agricultural use was determined considering the electrical conductivity, sodium adsorption ratio, sodium percentage, permeability index, Wilcox and United States Salinity Laboratory diagrams. The influence of freshwater recharge from the dam is evident as the groundwater in wells nearer to the check dam was suitable for both irrigation and domestic purposes. However, the groundwater away from the dam had a high ionic composition. This study demonstrated that in other fluoride-affected areas, the concentration can be reduced by dilution with the construction of check dams as a measure of managed aquifer recharge.

Quality Work, Quality Control in Technical Services.

ERIC Educational Resources Information Center

Horny, Karen L.

1985-01-01

Quality in library technical services is explored in light of changes produced by automation. Highlights include a definition of quality; new opportunities and shifting priorities; cataloging (fullness of records, heading consistency, accountability, local standards, automated checking); need for new skills (management, staff); and boons of…

Expedition 18 Suit Pressure Check

NASA Image and Video Library

2008-10-11

Expedition 18 Commander Michael Fincke waves hello to his family as he and Expedition 18 Flight Engineer Yuri V. Lonchakov and American spaceflight participant Richard Garriott have their Russian Sokol suits pressure checked prior to launching in the Soyuz TMA-13 spacecraft, Sunday, Oct. 12, 2008 from the Baikonur Cosmodrome in Kazakhstan. The three crew members are scheduled to dock with the International Space Station on Oct. 14. Fincke and Lonchakov will spend six months on the station, while Garriott will return to Earth Oct. 24 with two of the Expedition 17 crew members currently on the International Space Station. Photo Credit: (NASA/Bill Ingalls)

Expedition 18 Suit Pressure Check

NASA Image and Video Library

2008-10-11

Expedition 18 Commander Michael Fincke, foreground, has his Russian Sokol suit pressure checked prior to launching in the Soyuz TMA-13 spacecraft with American spaceflight participant Richard Garriott and Expedition 18 Flight Engineer Yuri V. Lonchakov, right, Sunday, Oct. 12, 2008 from the Baikonur Cosmodrome in Kazakhstan. The three crew members are scheduled to dock with the International Space Station on Oct. 14. Fincke and Lonchakov will spend six months on the station, while Garriott will return to Earth Oct. 24 with two of the Expedition 17 crew members currently on the International Space Station. Photo Credit: (NASA/Bill Ingalls)

KSC-04PD-1682

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. In the Orbiter Processing Facility, workers check the fit of the nose cap (right) after installation on the orbiter Atlantis. The nose cap was removed from the vehicle in May and sent back to the vendor for thorough Non- Destructive Engineering evaluation and recoating. Thermography was also performed to check for internal flaws. This procedure uses high intensity light to heat areas that are immediately scanned with an infrared camera. White Thermal Protection System blankets were reinstalled on the nose cap before installation. Processing continues on Atlantis for its future mission to the International Space Station.

The Internal Audit.

ERIC Educational Resources Information Center

Kuhn, Robert H.

1981-01-01

Internal control comprises the plan of organization and all the coordinate methods and measures adopted within a school system to safeguard its assets, check the reliability of its accounting data, promote operational efficiency, and encourage adherence to prescribed policies. (Author)

Direct to consumer advertising via the Internet, a study of hip resurfacing.

PubMed

Ogunwale, B; Clarke, J; Young, D; Mohammed, A; Patil, S; Meek, R M D

2009-02-01

With increased use of the internet for health information and direct to consumer advertising from medical companies, there is concern about the quality of information available to patients. The aim of this study was to examine the quality of health information on the internet for hip resurfacing. An assessment tool was designed to measure quality of information. Websites were measured on credibility of source; usability; currentness of the information; content relevance; content accuracy/completeness and disclosure/bias. Each website assessed was given a total score, based on number of scores achieved from the above categories websites were further analysed on author, geographical origin and possession of an independent credibility check. There was positive correlation between the overall score for the website and the score of each website in each assessment category. Websites by implant companies, doctors and hospitals scored poorly. Websites with an independent credibility check such as Health on the Net (HoN) scored twice the total scores of websites without. Like other internet health websites, the quality of information on hip resurfacing websites is variable. This study highlights methods by which to assess the quality of health information on the internet and advocates that patients should look for a statement of an "independent credibility check" when searching for information on hip resurfacing.

STS-97 Mission Specialist Tanner during pre-pack and fit check

NASA Technical Reports Server (NTRS)

2000-01-01

STS-97 Mission Specialist Joseph Tanner gets help with his boots from suit technician Erin Canlon during check pre-pack and fit check. Mission STS-97 is the sixth construction flight to the International Space Station. Its payload includes the P6 Integrated Truss Structure and a photovoltaic (PV) module, with giant solar arrays that will provide power to the Station. The mission includes two spacewalks to complete the solar array connections. STS-97 is scheduled to launch Nov. 30 at about 10:06 p.m. EST.

[Update on microbiological quality assurance meat and meat products in Morocco].

PubMed

Rachidi, H; Latrache, H

2018-03-01

Food safety has become an absolute necessity in all countries. As a result, Morocco has taken several measures and actions to develop food safety and food-borne disease control. This study aimed to highlight the level of improvement in the quality assurance of meat and meat products in Morocco. It is based on a non-exhaustive review of the regulatory texts governing food safety in the country, as well as a statistical study on establishments of meat and meat products adopting a self-checking system and approved by the National Office of Sanitary Safety of Food. Morocco has introduced several laws and regulations requiring sanitary control of food products. Also, the number of establishments of meat and meat products adopting a system of self-control and approved by the National Office of Sanitary Safety of Food has improved significantly. It has increased from 58 in 2007 to 273 in 2016. The adoption of self-monitoring systems allows better access to international markets, improved quality of food products and a considerable reduction in microbial contamination. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

[Impact of a quality assurance program on the use of neuromuscular monitoring and reversal of muscle relaxants].

PubMed

Motamed, C; Bourgain, J-L

2009-04-01

As part of a quality assurance in the anaesthesia department, this study was designed to enhance the rate of neuromuscular blockade monitoring for patients receiving muscle relaxant during anaesthesia. After approval of our local ethical committee, we assessed 200 computerized anaesthesia records in which neuromuscular relaxants were used. The following data were collected: demographic characteristics, durations of anaesthesia and surgery, use of neuromuscular monitoring, reversal agents and the quality of neuromuscular monitoring. The results were discussed with all anaesthesia providers of the department and an internal guideline was elaborated with the endpoint that all patients having muscle relaxants should have quantitative neuromuscular monitoring. Six months later, another assessment of 200 consecutive records collected the same data to check the efficiency of the elaborated guideline. The monitoring rate was of 67% at the first assessment and increased to 94% (p<0.05). The reversal rate was at 48% in the first assessment and was stable at the second assessment (50%). The rate of patients not monitored and not reversed decreased from 5 to 2% (p<0.05). This study shows that as part of a quality assurance program systematic quantitative monitoring of neuromuscular blockade can be significantly increased.

Sub-pixel analysis to support graphic security after scanning at low resolution

NASA Astrophysics Data System (ADS)

Haas, Bertrand; Cordery, Robert; Gou, Hongmei; Decker, Steve

2006-02-01

Whether in the domain of audio, video or finance, our world tends to become increasingly digital. However, for diverse reasons, the transition from analog to digital is often much extended in time, and proceeds by long steps (and sometimes never completes). One such step is the conversion of information on analog media to digital information. We focus in this paper on the conversion (scanning) of printed documents to digital images. Analog media have the advantage over digital channels that they can harbor much imperceptible information that can be used for fraud detection and forensic purposes. But this secondary information usually fails to be retrieved during the conversion step. This is particularly relevant since the Check-21 act (Check Clearing for the 21st Century act) became effective in 2004 and allows images of checks to be handled by banks as usual paper checks. We use here this situation of check scanning as our primary benchmark for graphic security features after scanning. We will first present a quick review of the most common graphic security features currently found on checks, with their specific purpose, qualities and disadvantages, and we demonstrate their poor survivability after scanning in the average scanning conditions expected from the Check-21 Act. We will then present a novel method of measurement of distances between and rotations of line elements in a scanned image: Based on an appropriate print model, we refine direct measurements to an accuracy beyond the size of a scanning pixel, so we can then determine expected distances, periodicity, sharpness and print quality of known characters, symbols and other graphic elements in a document image. Finally we will apply our method to fraud detection of documents after gray-scale scanning at 300dpi resolution. We show in particular that alterations on legitimate checks or copies of checks can be successfully detected by measuring with sub-pixel accuracy the irregularities inherently introduced by the illegitimate process.

Development of an analysis tool for cloud base height and visibility

NASA Astrophysics Data System (ADS)

Umdasch, Sarah; Reinhold, Steinacker; Manfred, Dorninger; Markus, Kerschbaum; Wolfgang, Pöttschacher

2014-05-01

The meteorological variables cloud base height (CBH) and horizontal atmospheric visibility (VIS) at surface level are of vital importance for safety and effectiveness in aviation. Around 20% of all civil aviation accidents in the USA from 2003 to 2007 were due to weather related causes, around 18% of which were owing to decreased visibility or ceiling (main CBH). The aim of this study is to develop a system generating quality-controlled gridded analyses of the two parameters based on the integration of various kinds of observational data. Upon completion, the tool is planned to provide guidance for nowcasting during take-off and landing as well as for flights operated under visual flight rules. Primary input data consists of manual as well as instrumental observation of CBH and VIS. In Austria, restructuring of part of the standard meteorological stations from human observation to automatic measurement of VIS and CBH is currently in progress. As ancillary data, satellite derived products can add 2-dimensional information, e.g. Cloud Type by NWC SAF (Nowcasting Satellite Application Facilities) MSG (Meteosat Second Generation). Other useful available data are meteorological surface measurements (in particular of temperature, humidity, wind and precipitation), radiosonde, radar and high resolution topography data. A one-year data set is used to study the spatial and weather-dependent representativeness of the CBH and VIS measurements. The VERA (Vienna Enhanced Resolution Analysis) system of the Institute of Meteorology and Geophysics of the University of Vienna provides the framework for the analysis development. Its integrated "Fingerprint" technique allows the insertion of empirical prior knowledge and ancillary information in the form of spatial patterns. Prior to the analysis, a quality control of input data is performed. For CBH and VIS, quality control can consist of internal consistency checks between different data sources. The possibility of two-dimensional consistency checks has to be explored. First results in the development of quality control features and fingerprints will be shown.

Is a quasi-3D dosimeter better than a 2D dosimeter for Tomotherapy delivery quality assurance?

NASA Astrophysics Data System (ADS)

Xing, Aitang; Deshpande, Shrikant; Arumugam, Sankar; George, Armia; Holloway, Lois; Vial, Philip; Goozee, Gary

2015-01-01

Delivery quality assurance (DQA) has been performed for each Tomotherapy patient either using ArcCHECK or MatriXX Evolution in our clinic since 2012. ArcCHECK is a quasi-3D dosimeter whereas MatriXX is a 2D detector. A review of DQA results was performed for all patients in the last three years, a total of 221 DQA plans. These DQA plans came from 215 patients with a variety of treatment sites including head-neck, pelvis, and chest wall. The acceptable Gamma pass rate in our clinic is over 95% using 3mm and 3% of maximum planned dose with 10% dose threshold. The mean value and standard deviation of Gamma pass rates were 98.2% ± 1.98(1SD) for MatriXX and 98.5%±1.88 (1SD) for ArcCHECK. A paired t-test was also performed for the groups of patients whose DQA was performed with both the ArcCHECK and MatriXX. No statistical dependence was found in terms of the Gamma pass rate for ArcCHECK and MatriXX. The considered 3D and 2D dosimeters have achieved similar results in performing routine patient-specific DQA for patients treated on a TomoTherapy unit.

Measuring Data Quality Through a Source Data Verification Audit in a Clinical Research Setting.

PubMed

Houston, Lauren; Probst, Yasmine; Humphries, Allison

2015-01-01

Health data has long been scrutinised in relation to data quality and integrity problems. Currently, no internationally accepted or "gold standard" method exists measuring data quality and error rates within datasets. We conducted a source data verification (SDV) audit on a prospective clinical trial dataset. An audit plan was applied to conduct 100% manual verification checks on a 10% random sample of participant files. A quality assurance rule was developed, whereby if >5% of data variables were incorrect a second 10% random sample would be extracted from the trial data set. Error was coded: correct, incorrect (valid or invalid), not recorded or not entered. Audit-1 had a total error of 33% and audit-2 36%. The physiological section was the only audit section to have <5% error. Data not recorded to case report forms had the greatest impact on error calculations. A significant association (p=0.00) was found between audit-1 and audit-2 and whether or not data was deemed correct or incorrect. Our study developed a straightforward method to perform a SDV audit. An audit rule was identified and error coding was implemented. Findings demonstrate that monitoring data quality by a SDV audit can identify data quality and integrity issues within clinical research settings allowing quality improvement to be made. The authors suggest this approach be implemented for future research.

Strength evaluation of prosthetic check sockets, copolymer sockets, and definitive laminated sockets.

PubMed

Gerschutz, Maria J; Haynes, Michael L; Nixon, Derek; Colvin, James M

2012-01-01

A prosthesis encounters loading through forces and torques exerted by the person with amputation. International Organization for Standardization (ISO) standard 10328 was designed to test most lower-limb prosthetic components. However, this standard does not include prosthetic sockets. We measured static failure loads of prosthetic sockets using a modified ISO 10328 and then compared them with the criteria set by this standard for other components. Check socket (CS) strengths were influenced by thickness, material choice, and fabrication method. Copolymer socket (CP) strengths depended on thickness and fabrication methods. A majority of the CSs and all of the CPs failed to pass the ISO 10328 ductile loading criterion. In contrast, the strengths of definitive laminated sockets (DLs) were influenced more by construction material and technique. A majority of the DLs failed to pass the ISO 10328 brittle loading criterion. Analyzing prosthetic sockets from a variety of facilities demonstrated that socket performance varies considerably between and within facilities. The results from this article provide a foundation for understanding the quality of prosthetic sockets, some insight into possible routes for improving the current care delivered to patients, and a comparative basis for future technology.

External audits of electron beams using mailed TLD dosimetry: preliminary results.

PubMed

Gomola, I; Van Dam, J; Isern-Verdum, J; Verstraete, J; Reymen, R; Dutreix, A; Davis, B; Huyskens, D

2001-02-01

A feasibility study has been performed to investigate the possibility of using mailed thermoluminescence dosimetry (TLD) for external audits of clinical electron beams in Europe. In the frame of the EC Network Project for Quality Assurance in Radiotherapy, instruction sheets and mailing procedures have been defined for mailed TLD dosimetry using the dedicated holder developed by a panel of experts of the International Atomic Energy Agency (IAEA). Three hundred and thirty electron beam set-ups have been checked in the reference centres and some local centres of the EC Network Project and in addition through the centres participating to the EORTC Radiotherapy Group trial 22922. The mean ratio of measured dose to stated dose is 0.2% and the standard deviation of measured dose to stated dose is 3.2%. In seven beam set-ups, deviations greater than 10% were observed (max. 66%), showing the usefulness of these checks. The results of this feasibility study (instruction sheets, mailing procedures, holder) are presently endorsed by the EQUAL-ESTRO structure in order to offer in the future to all ESTRO members the possibility to request external audits of clinical electron beams.

Check out the Atmospheric Science User Forum

Atmospheric Science Data Center

2016-11-16

Check out the Atmospheric Science User Forum Tuesday, November 15, 2016 The ASDC would like to bring your attention to the Atmospheric Science User Forum. The purpose of this forum is to improve user service, quality, and efficiency of NASA atmospheric science data. The forum intends to provide a quick and easy way to facilitate ...

Helical tomotherapy quality assurance with ArcCHECK.

PubMed

Chapman, David; Barnett, Rob; Yartsev, Slav

2014-01-01

To design a quality assurance (QA) procedure for helical tomotherapy that measures multiple beam parameters with 1 delivery and uses a rotating gantry to simulate treatment conditions. The customized QA procedure was preprogrammed on the tomotherapy operator station. The dosimetry measurements were performed using an ArcCHECK diode array and an A1SL ion chamber inserted in the central holder. The ArcCHECK was positioned 10cm above the isocenter so that the 21-cm diameter detector array could measure the 40-cm wide tomotherapy beam. During the implementation of the new QA procedure, separate comparative measurements were made using ion chambers in both liquid and solid water, the tomotherapy onboard detector array, and a MapCHECK diode array for a period of 10 weeks. There was good agreement (within 1.3%) for the beam output and cone ratio obtained with the new procedure and the routine QA measurements. The measured beam energy was comparable (0.3%) to solid water measurement during the 10-week evaluation period, excluding 2 of the 10 measurements with unusually high background. The symmetry reading was similarly compromised for those 2 weeks, and on the other weeks, it deviated from the solid water reading by ~2.5%. The ArcCHECK phantom presents a suitable alternative for performing helical tomotherapy QA, provided the background is collected properly. The proposed weekly procedure using ArcCHECK and water phantom makes the QA process more efficient. Copyright © 2014 American Association of Medical Dosimetrists. Published by Elsevier Inc. All rights reserved.

Helical tomotherapy quality assurance with ArcCHECK

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chapman, David; Barnett, Rob; Yartsev, Slav, E-mail: slav.yartsev@lhsc.on.ca

2014-07-01

To design a quality assurance (QA) procedure for helical tomotherapy that measures multiple beam parameters with 1 delivery and uses a rotating gantry to simulate treatment conditions. The customized QA procedure was preprogrammed on the tomotherapy operator station. The dosimetry measurements were performed using an ArcCHECK diode array and an A1SL ion chamber inserted in the central holder. The ArcCHECK was positioned 10 cm above the isocenter so that the 21-cm diameter detector array could measure the 40-cm wide tomotherapy beam. During the implementation of the new QA procedure, separate comparative measurements were made using ion chambers in both liquidmore » and solid water, the tomotherapy onboard detector array, and a MapCHECK diode array for a period of 10 weeks. There was good agreement (within 1.3%) for the beam output and cone ratio obtained with the new procedure and the routine QA measurements. The measured beam energy was comparable (0.3%) to solid water measurement during the 10-week evaluation period, excluding 2 of the 10 measurements with unusually high background. The symmetry reading was similarly compromised for those 2 weeks, and on the other weeks, it deviated from the solid water reading by ∼2.5%. The ArcCHECK phantom presents a suitable alternative for performing helical tomotherapy QA, provided the background is collected properly. The proposed weekly procedure using ArcCHECK and water phantom makes the QA process more efficient.« less

Revisiting the Procedures for the Vector Data Quality Assurance in Practice

NASA Astrophysics Data System (ADS)

Erdoğan, M.; Torun, A.; Boyacı, D.

2012-07-01

Immense use of topographical data in spatial data visualization, business GIS (Geographic Information Systems) solutions and applications, mobile and location-based services forced the topo-data providers to create standard, up-to-date and complete data sets in a sustainable frame. Data quality has been studied and researched for more than two decades. There have been un-countable numbers of references on its semantics, its conceptual logical and representations and many applications on spatial databases and GIS. However, there is a gap between research and practice in the sense of spatial data quality which increases the costs and decreases the efficiency of data production. Spatial data quality is well-known by academia and industry but usually in different context. The research on spatial data quality stated several issues having practical use such as descriptive information, metadata, fulfillment of spatial relationships among data, integrity measures, geometric constraints etc. The industry and data producers realize them in three stages; pre-, co- and post data capturing. The pre-data capturing stage covers semantic modelling, data definition, cataloguing, modelling, data dictionary and schema creation processes. The co-data capturing stage covers general rules of spatial relationships, data and model specific rules such as topologic and model building relationships, geometric threshold, data extraction guidelines, object-object, object-belonging class, object-non-belonging class, class-class relationships to be taken into account during data capturing. And post-data capturing stage covers specified QC (quality check) benchmarks and checking compliance to general and specific rules. The vector data quality criteria are different from the views of producers and users. But these criteria are generally driven by the needs, expectations and feedbacks of the users. This paper presents a practical method which closes the gap between theory and practice. Development of spatial data quality concepts into developments and application requires existence of conceptual, logical and most importantly physical existence of data model, rules and knowledge of realization in a form of geo-spatial data. The applicable metrics and thresholds are determined on this concrete base. This study discusses application of geo-spatial data quality issues and QA (quality assurance) and QC procedures in the topographic data production. Firstly we introduce MGCP (Multinational Geospatial Co-production Program) data profile of NATO (North Atlantic Treaty Organization) DFDD (DGIWG Feature Data Dictionary), the requirements of data owner, the view of data producers for both data capturing and QC and finally QA to fulfil user needs. Then, our practical and new approach which divides the quality into three phases is introduced. Finally, implementation of our approach to accomplish metrics, measures and thresholds of quality definitions is discussed. In this paper, especially geometry and semantics quality and quality control procedures that can be performed by the producers are discussed. Some applicable best-practices that we experienced on techniques of quality control, defining regulations that define the objectives and data production procedures are given in the final remarks. These quality control procedures should include the visual checks over the source data, captured vector data and printouts, some automatic checks that can be performed by software and some semi-automatic checks by the interaction with quality control personnel. Finally, these quality control procedures should ensure the geometric, semantic, attribution and metadata quality of vector data.

Different top-down approaches to estimate measurement uncertainty of whole blood tacrolimus mass concentration values.

PubMed

Rigo-Bonnin, Raül; Blanco-Font, Aurora; Canalias, Francesca

2018-05-08

Values of mass concentration of tacrolimus in whole blood are commonly used by the clinicians for monitoring the status of a transplant patient and for checking whether the administered dose of tacrolimus is effective. So, clinical laboratories must provide results as accurately as possible. Measurement uncertainty can allow ensuring reliability of these results. The aim of this study was to estimate measurement uncertainty of whole blood mass concentration tacrolimus values obtained by UHPLC-MS/MS using two top-down approaches: the single laboratory validation approach and the proficiency testing approach. For the single laboratory validation approach, we estimated the uncertainties associated to the intermediate imprecision (using long-term internal quality control data) and the bias (utilizing a certified reference material). Next, we combined them together with the uncertainties related to the calibrators-assigned values to obtain a combined uncertainty for, finally, to calculate the expanded uncertainty. For the proficiency testing approach, the uncertainty was estimated in a similar way that the single laboratory validation approach but considering data from internal and external quality control schemes to estimate the uncertainty related to the bias. The estimated expanded uncertainty for single laboratory validation, proficiency testing using internal and external quality control schemes were 11.8%, 13.2%, and 13.0%, respectively. After performing the two top-down approaches, we observed that their uncertainty results were quite similar. This fact would confirm that either two approaches could be used to estimate the measurement uncertainty of whole blood mass concentration tacrolimus values in clinical laboratories. Copyright © 2018 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

Rebuilding the Bulletin of the International Seismological Centre (ISC)

NASA Astrophysics Data System (ADS)

Brown, L. N.; Lieser, K.; Harris, J.; Shumba, B.; Verney, R.; Storchak, D. A.; Di Giacomo, D.; Delahaye, E.

2017-12-01

Currently, the published International Seismological Centre (ISC) locations represent a mixture of algorithms (Reviser, ISCloc), velocity models (Jeffreys-Bullen, ak135), and phases (P-wave only, P&S, and finally all available ak135 phases starting in 2009). Thus, the primary goal of the Rebuild Project is to modernize the ISC bulletin by homogenizing our methods, procedures, and quality standards across more than four decades (1964-2010) of prior relocations at the ISC. We are also incorporating many new historical datasets from both temporary and permanent networks which were not available to us at the time of first relocation. Additionally, event magnitudes are determined in a more robust way - no longer will magnitudes be calculated using only one or two station readings, but instead recomputed with an alpha-trimmed median and requiring a minimum of three station readings. Employing the newest version of the ISC locator (ISCloc, Bondar & Storchak, 2011), all events in the bulletin are relocated using the ak135 global velocity model using all available phases. Then, using an internally developed and tested set of event quality criteria, our team of analysts works carefully with each event that has been flagged as requiring additional review. After each data month has been processed, an updated set of quality checks are run, and any further issues are consequently resolved. Our current predictions indicate that more than 150,000 flagged events will be reviewed by our analysts over the forty-six data-year period of the project. Once the Rebuild Project is finished, the ISC Bulletin will be the most complete and modern database of global seismicity freely available anywhere in the world. At present, we have finished work on sixteen years of historical data (1964-1979), and we show our preliminary results here.

Quality assurance of weather data for agricultural system model input

USDA-ARS?s Scientific Manuscript database

It is well known that crop production and hydrologic variation on watersheds is weather related. Rarely, however, is meteorological data quality checks reported for agricultural systems model research. We present quality assurance procedures for agricultural system model weather data input. Problems...

An analysis of the ArcCHECK-MR diode array's performance for ViewRay quality assurance.

PubMed

Ellefson, Steven T; Culberson, Wesley S; Bednarz, Bryan P; DeWerd, Larry A; Bayouth, John E

2017-07-01

The ArcCHECK-MR diode array utilizes a correction system with a virtual inclinometer to correct the angular response dependencies of the diodes. However, this correction system cannot be applied to measurements on the ViewRay MR-IGRT system due to the virtual inclinometer's incompatibility with the ViewRay's multiple simultaneous beams. Additionally, the ArcCHECK's current correction factors were determined without magnetic field effects taken into account. In the course of performing ViewRay IMRT quality assurance with the ArcCHECK, measurements were observed to be consistently higher than the ViewRay TPS predictions. The goals of this study were to quantify the observed discrepancies and test whether applying the current factors improves the ArcCHECK's accuracy for measurements on the ViewRay. Gamma and frequency analysis were performed on 19 ViewRay patient plans. Ion chamber measurements were performed at a subset of diode locations using a PMMA phantom with the same dimensions as the ArcCHECK. A new method for applying directionally dependent factors utilizing beam information from the ViewRay TPS was developed in order to analyze the current ArcCHECK correction factors. To test the current factors, nine ViewRay plans were altered to be delivered with only a single simultaneous beam and were measured with the ArcCHECK. The current correction factors were applied using both the new and current methods. The new method was also used to apply corrections to the original 19 ViewRay plans. It was found the ArcCHECK systematically reports doses higher than those actually delivered by the ViewRay. Application of the current correction factors by either method did not consistently improve measurement accuracy. As dose deposition and diode response have both been shown to change under the influence of a magnetic field, it can be concluded the current ArcCHECK correction factors are invalid and/or inadequate to correct measurements on the ViewRay system. © 2017 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

Center for Advanced Modeling and Simulation Intern

ScienceCinema

Gertman, Vanessa

2017-12-13

Some interns just copy papers and seal envelopes. Not at INL! Check out how Vanessa Gertman, an INL intern working at the Center for Advanced Modeling and Simulation, spent her summer working with some intense visualization software. Lots more content like this is available at INL's facebook page http://www.facebook.com/idahonationallaboratory.

Center for Advanced Modeling and Simulation Intern

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gertman, Vanessa

Some interns just copy papers and seal envelopes. Not at INL! Check out how Vanessa Gertman, an INL intern working at the Center for Advanced Modeling and Simulation, spent her summer working with some intense visualization software. Lots more content like this is available at INL's facebook page http://www.facebook.com/idahonationallaboratory.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tan, J; Yan, Y; Hager, F

Purpose: Radiation therapy has evolved to become not only more precise and potent, but also more complicated to monitor and deliver. More rigorous and comprehensive quality assurance is needed to safeguard ever advancing radiation therapy. ICRU standards dictate that an ever growing set of treatment parameters are manually checked weekly by medical physicists. This “weekly chart check” procedure is laborious and subject to human errors or other factors. A computer-assisted chart checking process will enable more complete and accurate human review of critical parameters, reduce the risk of medical errors, and improve the efficiency. Methods: We developed a web-based softwaremore » system that enables a thorough weekly quality assurance checks. In the backend, the software retrieves all machine parameters from a Treatment Management System (TMS) and compares them against the corresponding ones from the treatment planning system. They are also checked for validity against preset rules. The results are displayed as a web page in the front-end for physicists to review. Then a summary report is generated and uploaded automatically to the TMS as a record for weekly chart checking. Results: The software system has been deployed on a web server in our department’s intranet, and has been tested thoroughly by our clinical physicists. A plan parameter would be highlighted when it is off the preset limit. The developed system has changed the way of checking charts with significantly improved accuracy, efficiency, and completeness. It has been shown to be robust, fast, and easy to use. Conclusion: A computer-assisted system has been developed for efficient, accurate, and comprehensive weekly chart checking. The system has been extensively validated and is being implemented for routine clinical use.« less

Collection of post mortem data: DVI protocols and quality assurance.

PubMed

Kvaal, Sigrid I

2006-05-15

In many countries forensic odontologists are members of the Disaster Victim Identification (DVI) team. As part of their post mortem (PM) tasks work on the incident site may include securing and preserving the dental material and evidence before transport to the mortuary. In the autopsy room the main aim is to register the PM dental status. Photographs and radiographs are essential documentations in addition to a conventional registration of the dental status. Abbreviations in the registration may be used if agreed with the ante mortem (AM) team. Dental age estimation may be an aid in the sorting process and especially in victims without previous dental treatment. Interpol has a form set as part of their DVI manual. Forensic odontologists working in pairs and checking each other will act as quality assurance (QA) as suggested by International Organization for Forensic Odonto-Stomatology (IOFOS). Direct entry into the computer program as part of the registration in the autopsy room may save time and manpower.

Respiratory Protection Toolkit: Providing Guidance Without Changing Requirements-Can We Make an Impact?

PubMed

Bien, Elizabeth Ann; Gillespie, Gordon Lee; Betcher, Cynthia Ann; Thrasher, Terri L; Mingerink, Donna R

2016-12-01

International travel and infectious respiratory illnesses worldwide place health care workers (HCWs) at increasing risk of respiratory exposures. To ensure the highest quality safety initiatives, one health care system used a quality improvement model of Plan-Do-Study-Act and guidance from Occupational Safety and Health Administration's (OSHA) May 2015 Hospital Respiratory Protection Program (RPP) Toolkit to assess a current program. The toolkit aided in identification of opportunities for improvement within their well-designed RPP. One opportunity was requiring respirator use during aerosol-generating procedures for specific infectious illnesses. Observation data demonstrated opportunities to mitigate controllable risks including strap placement, user seal check, and reuse of disposable N95 filtering facepiece respirators. Subsequent interdisciplinary collaboration resulted in other ideas to decrease risks and increase protection from potentially infectious respiratory illnesses. The toolkit's comprehensive document to evaluate the program showed that while the OSHA standards have not changed, the addition of the toolkit can better protect HCWs. © 2016 The Author(s).

Predatory Publishing Is a Threat to Non-Mainstream Science

PubMed Central

Nurmashev, Bekaidar

2017-01-01

This article highlights the issue of wasteful publishing practices that primarily affect non-mainstream science countries and rapidly growing academic disciplines. Numerous start-up open access publishers with soft or nonexistent quality checks and huge commercial interests have created a global crisis in the publishing market. Their publishing practices have been thoroughly examined, leading to the blacklisting of many journals by Jeffrey Beall. However, it appears that some subscription journals are also falling short of adhering to the international recommendations of global editorial associations. Unethical editing agencies that promote their services in non-mainstream science countries create more problems for inexperienced authors. It is suggested to regularly monitor the quality of already indexed journals and upgrade criteria of covering new sources by the Emerging Sources Citation Index (Web of Science), Scopus, and specialist bibliographic databases. Regional awareness campaigns to inform stakeholders of science communication about the importance of ethical writing, transparency of editing services, and permanent archiving can be also helpful for eradicating unethical publishing practices. PMID:28378542

Predatory Publishing Is a Threat to Non-Mainstream Science.

PubMed

Gasparyan, Armen Yuri; Nurmashev, Bekaidar; Udovik, Elena E; Koroleva, Anna M; Kitas, George D

2017-05-01

This article highlights the issue of wasteful publishing practices that primarily affect non-mainstream science countries and rapidly growing academic disciplines. Numerous start-up open access publishers with soft or nonexistent quality checks and huge commercial interests have created a global crisis in the publishing market. Their publishing practices have been thoroughly examined, leading to the blacklisting of many journals by Jeffrey Beall. However, it appears that some subscription journals are also falling short of adhering to the international recommendations of global editorial associations. Unethical editing agencies that promote their services in non-mainstream science countries create more problems for inexperienced authors. It is suggested to regularly monitor the quality of already indexed journals and upgrade criteria of covering new sources by the Emerging Sources Citation Index (Web of Science), Scopus, and specialist bibliographic databases. Regional awareness campaigns to inform stakeholders of science communication about the importance of ethical writing, transparency of editing services, and permanent archiving can be also helpful for eradicating unethical publishing practices. © 2017 The Korean Academy of Medical Sciences.

Guidance for laboratories performing molecular pathology for cancer patients

PubMed Central

Cree, Ian A; Deans, Zandra; Ligtenberg, Marjolijn J L; Normanno, Nicola; Edsjö, Anders; Rouleau, Etienne; Solé, Francesc; Thunnissen, Erik; Timens, Wim; Schuuring, Ed; Dequeker, Elisabeth; Murray, Samuel; Dietel, Manfred; Groenen, Patricia; Van Krieken, J Han

2014-01-01

Molecular testing is becoming an important part of the diagnosis of any patient with cancer. The challenge to laboratories is to meet this need, using reliable methods and processes to ensure that patients receive a timely and accurate report on which their treatment will be based. The aim of this paper is to provide minimum requirements for the management of molecular pathology laboratories. This general guidance should be augmented by the specific guidance available for different tumour types and tests. Preanalytical considerations are important, and careful consideration of the way in which specimens are obtained and reach the laboratory is necessary. Sample receipt and handling follow standard operating procedures, but some alterations may be necessary if molecular testing is to be performed, for instance to control tissue fixation. DNA and RNA extraction can be standardised and should be checked for quality and quantity of output on a regular basis. The choice of analytical method(s) depends on clinical requirements, desired turnaround time, and expertise available. Internal quality control, regular internal audit of the whole testing process, laboratory accreditation, and continual participation in external quality assessment schemes are prerequisites for delivery of a reliable service. A molecular pathology report should accurately convey the information the clinician needs to treat the patient with sufficient information to allow for correct interpretation of the result. Molecular pathology is developing rapidly, and further detailed evidence-based recommendations are required for many of the topics covered here. PMID:25012948

Plan-Do-Check-Act and the Management of Institutional Research. AIR 1992 Annual Forum Paper.

ERIC Educational Resources Information Center

McLaughlin, Gerald W.; Snyder, Julie K.

This paper describes the application of a Total Quality Management strategy called Plan-Do-Check-Act (PDCA) to the projects and activities of an institutional research office at the Virginia Polytechnic Institute and State University. PDCA is a cycle designed to facilitate incremental continual improvement through change. The specific steps are…

Agricultural Baseline (BL0) scenario

DOE Data Explorer

Davis, Maggie R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)] (ORCID:0000000181319328); Hellwinckel, Chad M [University of Tennessee] (ORCID:0000000173085058); Eaton, Laurence [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)] (ORCID:0000000312709626); Turhollow, Anthony [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)] (ORCID:0000000228159350); Brandt, Craig [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)] (ORCID:0000000214707379); Langholtz, Matthew H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)] (ORCID:0000000281537154)

2016-07-13

Scientific reason for data generation: to serve as the reference case for the BT16 volume 1 agricultural scenarios. The agricultural baseline runs from 2015 through 2040; a starting year of 2014 is used. Date the data set was last modified: 02/12/2016 How each parameter was produced (methods), format, and relationship to other data in the data set: simulation was developed without offering a farmgate price to energy crops or residues (i.e., building on both the USDA 2015 baseline and the agricultural census data (USDA NASS 2014). Data generated are .txt output files by year, simulation identifier, county code (1-3109). Instruments used: POLYSYS (version POLYS2015_V10_alt_JAN22B) supplied by the University of Tennessee APAC The quality assurance and quality control that have been applied: • Check for negative planted area, harvested area, production, yield and cost values. • Check if harvested area exceeds planted area for annuals. • Check FIPS codes.

Simple colonoscopy reporting system checking the detection rate of colon polyps.

PubMed

Kim, Jae Hyun; Choi, Youn Jung; Kwon, Hye Jung; Park, Seun Ja; Park, Moo In; Moon, Won; Kim, Sung Eun

2015-08-21

To present a simple colonoscopy reporting system that can be checked easily the detection rate of colon polyps. A simple colonoscopy reporting system Kosin Gastroenterology (KG quality reporting system) was developed. The polyp detection rate (PDR), adenoma detection rate (ADR), serrated polyp detection rate (SDR), and advanced adenoma detection rate (AADR) are easily calculated to use this system. In our gastroenterology center, the PDR, ADR, SDR, and AADR test results from each gastroenterologist were updated, every month. Between June 2014, when the program was started, and December 2014, the overall PDR and ADR in our center were 62.5% and 41.4%, respectively. And the overall SDR and AADR were 7.5% and 12.1%, respectively. We envision that KG quality reporting system can be applied to develop a comprehensive system to check colon polyp detection rates in other gastroenterology centers.

The Modern Measurement Technology And Checking Of Shafs Parameters

NASA Astrophysics Data System (ADS)

Tichá, Šárka; Botek, Jan

2015-12-01

This paper is focused on rationalization checking parameters of shaft in companies engaged in the production of components of electric motors, wind turbines and vacuum systems. Customers increasing constantly their requirements to ensure the overall quality of the product, i.e. the quality of machining, dimensional and shape accuracy and overall purity of the subscribed products. The aim of this paper is to introduce using modern measurement technology in controlling these components and compare the results with existing control methodology. The main objective of this rationalization is to eliminate mistakes and shortcomings of current inspection methods.

Full-Authority Fault-Tolerant Electronic Engine Control System for Variable Cycle Engines.

DTIC Science & Technology

1982-04-01

single internally self-checked VLSI micro - processor . The selected configuration is an externally checked pair of com- mercially available...Electronic Engine Control FPMH Failures per Million Hours FTMP Fault Tolerant Multi- Processor FTSC Fault Tolerant Spaceborn Computer GRAMP Generalized...Removal * MTBR Mean Time Between Repair MTTF Mean Time to Failure xiii List of Abbreviations (continued) - NH High Pressure Rotor Speed O&S Operating

Nespoli during Kazbek Fit Check in the Soyuz TMA-20/25S

NASA Image and Video Library

2011-04-13

ISS027-E-013433 (13 April 2011) --- European Space Agency astronaut Paolo Nespoli, Expedition 27 flight engineer, attired in a Russian Sokol launch and entry suit, is pictured in the Soyuz TMA-20 spacecraft currently docked to the Rassvet Mini-Research Module 1 (MRM1) of the International Space Station. Nespoli was conducting a fit check of his Kazbek couch in the Soyuz.

Temporal bone bank: complying with European Union directives on human tissue and cells.

PubMed

Van Rompaey, Vincent; Vandamme, Wouter; Muylle, Ludo; Van de Heyning, Paul H

2012-06-01

Availability of allograft tympano-ossicular systems (ATOS) provides unique reconstructive capabilities, allowing more radical removal of middle ear pathology. To provide ATOS, the University of Antwerp Temporal Bone Bank (UATB) was established in 1988. ATOS use was stopped in many countries because of safety issues concerning human tissue transplantation. Our objective was to maintain an ATOS tissue bank complying with European Union (EU) directives on human tissues and cells. The guidelines of the Belgian Superior Health Council, including EU directive requirements, were rigorously applied to UATB infrastructure, workflow protocols and activity. Workflow protocols were updated and an internal audit was performed to check and improve consistency with established quality systems and changing legislations. The Belgian Federal Agency of Medicines and Health Products performed an inspection to examine compliance with national legislatives and EU directives on human tissues and cells. A sample of important procedures was meticulously examined in its workflow setting next to assessment of the infrastructure and personnel. Results are reported on infrastructure, personnel, administrative workflow, procurement, preparation, processing, distribution, internal audit and inspection by the competent authority. Donors procured: 2006, 93 (45.1%); 2007, 64 (20.6%); 2008, 56 (13.1%); 2009, 79 (6.9%). The UATB was approved by the Minister of Health without critical or important shortcomings. The Ministry accords registration each time for 2 years. An ATOS tissue bank complying with EU regulations on human allografts is feasible and critical to assure that the patient receives tissue, which is safe, individually checked and prepared in a suitable environment.

Data Quality Control for Vessel Mounted Acoustic Doppler Current Profiler. Application for the Western Mediterranean Sea

NASA Technical Reports Server (NTRS)

Garcia-Gorriz, E.; Front, J.; Candela, J.

1997-01-01

A systematic Data Quality Checking Protocol for vessel Mounted Acoustic Doppler Current Profiler observations is proposed. Previous-to-acquisition conditions are considered along with simultaneous ones.

Evaluation of non-destructive technologies for construction quality control of HMA and PCC pavements in Louisiana : [research project capsule].

DOT National Transportation Integrated Search

2009-07-01

Current roadway quality control and quality acceptance (QC/QA) procedures : for Louisiana include coring for thickness, density, and air void checks in hot : mix asphalt (HMA) pavements and thickness and compressive strength for : Portland cement con...

Evaluation of a laboratory quality assurance pilot programme for malaria diagnostics in low-transmission areas of Kenya, 2013.

PubMed

Wanja, Elizabeth; Achilla, Rachel; Obare, Peter; Adeny, Rose; Moseti, Caroline; Otieno, Victor; Morang'a, Collins; Murigi, Ephantus; Nyamuni, John; Monthei, Derek R; Ogutu, Bernhards; Buff, Ann M

2017-05-25

One objective of the Kenya National Malaria Strategy 2009-2017 is scaling access to prompt diagnosis and effective treatment. In 2013, a quality assurance (QA) pilot was implemented to improve accuracy of malaria diagnostics at selected health facilities in low-transmission counties of Kenya. Trends in malaria diagnostic and QA indicator performance during the pilot are described. From June to December 2013, 28 QA officers provided on-the-job training and mentoring for malaria microscopy, malaria rapid diagnostic tests and laboratory QA/quality control (QC) practices over four 1-day visits at 83 health facilities. QA officers observed and recorded laboratory conditions and practices and cross-checked blood slides for malaria parasite presence, and a portion of cross-checked slides were confirmed by reference laboratories. Eighty (96%) facilities completed the pilot. Among 315 personnel at pilot initiation, 13% (n = 40) reported malaria diagnostics training within the previous 12 months. Slide positivity ranged from 3 to 7%. Compared to the reference laboratory, microscopy sensitivity ranged from 53 to 96% and positive predictive value from 39 to 53% for facility staff and from 60 to 96% and 52 to 80%, respectively, for QA officers. Compared to reference, specificity ranged from 88 to 98% and negative predictive value from 98 to 99% for health-facility personnel and from 93 to 99% and 99%, respectively, for QA officers. The kappa value ranged from 0.48-0.66 for facility staff and 0.57-0.84 for QA officers compared to reference. The only significant test performance improvement observed for facility staff was for specificity from 88% (95% CI 85-90%) to 98% (95% CI 97-99%). QA/QC practices, including use of positive-control slides, internal and external slide cross-checking and recording of QA/QC activities, all increased significantly across the pilot (p < 0.001). Reference material availability also increased significantly; availability of six microscopy job aids and seven microscopy standard operating procedures increased by a mean of 32 percentage points (p < 0.001) and 38 percentage points (p < 0.001), respectively. Significant gains were observed in malaria QA/QC practices over the pilot. However, these advances did not translate into improved accuracy of malaria diagnostic performance perhaps because of the limited duration of the QA pilot implementation.

Graduate International Students' Social Experiences Examined through Their Transient Lives: A Phenomenological Study at a Private Research University in the United States

ERIC Educational Resources Information Center

Kashyap, Nishmin

2010-01-01

This is a phenomenological study of ten graduate international students at Chardin University (pseudonym). Through 30 in-depth interviews, multiple social contacts, and group and member checking sessions, stories emerged that highlight the social experiences of these graduate international students through their transient lives. Theoretical…

International lessons in new methods for grading and integrating cost effectiveness evidence into clinical practice guidelines.

PubMed

Antioch, Kathryn M; Drummond, Michael F; Niessen, Louis W; Vondeling, Hindrik

2017-01-01

Economic evidence is influential in health technology assessment world-wide. Clinical Practice Guidelines (CPG) can enable economists to include economic information on health care provision. Application of economic evidence in CPGs, and its integration into clinical practice and national decision making is hampered by objections from professions, paucity of economic evidence or lack of policy commitment. The use of state-of-art economic methodologies will improve this. Economic evidence can be graded by 'checklists' to establish the best evidence for decision making given methodological rigor. New economic evaluation checklists, Multi-Criteria Decision Analyses (MCDA) and other decision criteria enable health economists to impact on decision making world-wide. We analyse the methodologies for integrating economic evidence into CPG agencies globally, including the Agency of Health Research and Quality (AHRQ) in the USA, National Health and Medical Research Council (NHMRC) and Australian political reforms. The Guidelines and Economists Network International (GENI) Board members from Australia, UK, Canada and Denmark presented the findings at the conference of the International Health Economists Association (IHEA) and we report conclusions and developments since. The Consolidated Guidelines for the Reporting of Economic Evaluations (CHEERS) 24 item check list can be used by AHRQ, NHMRC, other CPG and health organisations, in conjunction with the Drummond ten-point check list and a questionnaire that scores that checklist for grading studies, when assessing economic evidence. Cost-effectiveness Analysis (CEA) thresholds, opportunity cost and willingness-to-pay (WTP) are crucial issues for decision rules in CEA generally, including end-of-life therapies. Limitations of inter-rater reliability in checklists can be addressed by including more than one assessor to reach a consensus, especially when impacting on treatment decisions. We identify priority areas to generate economic evidence for CPGs by NHMRC, AHRQ, and other agencies. The evidence may cover demand for care issues such as involved time, logistics, innovation price, price sensitivity, substitutes and complements, WTP, absenteeism and presentism. Supply issues may include economies of scale, efficiency changes, and return on investment. Involved equity and efficiency measures may include cost-of-illness, disease burden, quality-of-life, budget impact, cost-effective ratios, net benefits and disparities in access and outcomes. Priority setting remains essential and trade-off decisions between policy criteria can be based on MCDA, both in evidence based clinical medicine and in health planning.

Visplause: Visual Data Quality Assessment of Many Time Series Using Plausibility Checks.

PubMed

Arbesser, Clemens; Spechtenhauser, Florian; Muhlbacher, Thomas; Piringer, Harald

2017-01-01

Trends like decentralized energy production lead to an exploding number of time series from sensors and other sources that need to be assessed regarding their data quality (DQ). While the identification of DQ problems for such routinely collected data is typically based on existing automated plausibility checks, an efficient inspection and validation of check results for hundreds or thousands of time series is challenging. The main contribution of this paper is the validated design of Visplause, a system to support an efficient inspection of DQ problems for many time series. The key idea of Visplause is to utilize meta-information concerning the semantics of both the time series and the plausibility checks for structuring and summarizing results of DQ checks in a flexible way. Linked views enable users to inspect anomalies in detail and to generate hypotheses about possible causes. The design of Visplause was guided by goals derived from a comprehensive task analysis with domain experts in the energy sector. We reflect on the design process by discussing design decisions at four stages and we identify lessons learned. We also report feedback from domain experts after using Visplause for a period of one month. This feedback suggests significant efficiency gains for DQ assessment, increased confidence in the DQ, and the applicability of Visplause to summarize indicators also outside the context of DQ.

The importance of reference materials in doping-control analysis.

PubMed

Mackay, Lindsey G; Kazlauskas, Rymantas

2011-08-01

Currently a large range of pure substance reference materials are available for calibration of doping-control methods. These materials enable traceability to the International System of Units (SI) for the results generated by World Anti-Doping Agency (WADA)-accredited laboratories. Only a small number of prohibited substances have threshold limits for which quantification is highly important. For these analytes only the highest quality reference materials that are available should be used. Many prohibited substances have no threshold limits and reference materials provide essential identity confirmation. For these reference materials the correct identity is critical and the methods used to assess identity in these cases should be critically evaluated. There is still a lack of certified matrix reference materials to support many aspects of doping analysis. However, in key areas a range of urine matrix materials have been produced for substances with threshold limits, for example 19-norandrosterone and testosterone/epitestosterone (T/E) ratio. These matrix-certified reference materials (CRMs) are an excellent independent means of checking method recovery and bias and will typically be used in method validation and then regularly as quality-control checks. They can be particularly important in the analysis of samples close to threshold limits, in which measurement accuracy becomes critical. Some reference materials for isotope ratio mass spectrometry (IRMS) analysis are available and a matrix material certified for steroid delta values is currently under production. In other new areas, for example the Athlete Biological Passport, peptide hormone testing, designer steroids, and gene doping, reference material needs still need to be thoroughly assessed and prioritised.

A PILOT SURVEY ON INJURY AND SAFETY CONCERNS IN INTERNATIONAL SLEDGE HOCKEY

PubMed Central

Finlayson, Heather; O'Connor, Russ; Anton, Hugh

2011-01-01

Objective: To describe sledge hockey injury patterns, safety issues and to develop potential injury prevention strategies. Design: Pilot survey study of international sledge hockey professionals, including trainers, physiotherapists, physicians, coaches and/or general managers. Setting: Personal encounter or online correspondence. Respondents: Sledge hockey professionals; a total of 10 respondents from the 5 top-ranked international teams recruited by personal encounter or online correspondence. Main Outcome Measurements: Descriptive Data reports on sledge athlete injury characteristics, quality of rules and enforcement, player equipment, challenges in the medical management during competition, and overall safety. Results: Muscle strains and concussions were identified as common, and injuries were reported to affect the upper body more frequently than the lower body. Overuse and body checking were predominant injury mechanisms. Safety concerns included excessive elbowing, inexperienced refereeing and inadequate equipment standards. Conclusions: This paper is the first publication primarily focused on sledge hockey injury and safety. This information provides unique opportunity for the consideration of implementation and evaluation of safety strategies. Safety interventions could include improved hand protection, cut-resistant materials in high-risk areas, increased vigilance to reduce intentional head-contact, lowered rink boards and modified bathroom floor surfacing. PMID:21904696

46 CFR 160.132-9 - Preapproval review.

Code of Federal Regulations, 2014 CFR

2014-10-01

... inventory of materials; (iii) The method for checking quality of fabrication and joints, including welding... §§ 160.132-19 and 160.132-21 of this subpart; (5) A description of the quality control procedures and... between the independent laboratory and Commandant under 46 CFR subpart 159.010. (d) Plan quality. All...

46 CFR 160.132-9 - Preapproval review.

Code of Federal Regulations, 2012 CFR

2012-10-01

... inventory of materials; (iii) The method for checking quality of fabrication and joints, including welding... §§ 160.132-19 and 160.132-21 of this subpart; (5) A description of the quality control procedures and... between the independent laboratory and Commandant under 46 CFR subpart 159.010. (d) Plan quality. All...

46 CFR 160.132-9 - Preapproval review.

Code of Federal Regulations, 2013 CFR

2013-10-01

... inventory of materials; (iii) The method for checking quality of fabrication and joints, including welding... §§ 160.132-19 and 160.132-21 of this subpart; (5) A description of the quality control procedures and... between the independent laboratory and Commandant under 46 CFR subpart 159.010. (d) Plan quality. All...

40 CFR 60.2735 - Is there a minimum amount of monitoring data I must obtain?

Code of Federal Regulations, 2014 CFR

2014-07-01

... activities including, as applicable, calibration checks and required zero and span adjustments. A monitoring... monitoring system quality assurance or control activities in calculations used to report emissions or...-control periods, and required monitoring system quality assurance or quality control activities including...

40 CFR 60.2735 - Is there a minimum amount of monitoring data I must obtain?

Code of Federal Regulations, 2013 CFR

2013-07-01

... activities including, as applicable, calibration checks and required zero and span adjustments. A monitoring... monitoring system quality assurance or control activities in calculations used to report emissions or...-control periods, and required monitoring system quality assurance or quality control activities including...

A School-Based Quality Improvement Program.

ERIC Educational Resources Information Center

Rappaport, Lewis A.

1993-01-01

As one Brooklyn high school discovered, quality improvement begins with administrator commitment and participants' immersion in the literature. Other key elements include ongoing training of personnel involved in the quality-improvement process, tools such as the Deming Cycle (plan-do-check-act), voluntary and goal-oriented teamwork, and a worthy…

Assessing Educational Processes Using Total-Quality-Management Measurement Tools.

ERIC Educational Resources Information Center

Macchia, Peter, Jr.

1993-01-01

Discussion of the use of Total Quality Management (TQM) assessment tools in educational settings highlights and gives examples of fishbone diagrams, or cause and effect charts; Pareto diagrams; control charts; histograms and check sheets; scatter diagrams; and flowcharts. Variation and quality are discussed in terms of continuous process…

PFReports: A program for systematic checking of annual peaks in NWISWeb

USGS Publications Warehouse

Ryberg, Karen R.

2008-01-01

The accuracy, characterization, and completeness of the U.S. Geological Survey (USGS) peak-flow data drive the determination of flood-frequency estimates that are used daily to design water and transportation infrastructure, delineate flood-plain boundaries, and regulate development and utilization of lands throughout the Nation and are essential to understanding the implications of climate change on flooding. Indeed, this high-profile database reflects and highlights the quality of USGS water-data collection programs. Its extension and improvement are essential to efforts to strengthen USGS networks and science leadership and is worthy of the attention of Water Science Center (WSC) hydrographers. This document describes a computer program, PFReports, and its output that facilitates efficient and robust review and correction of data in the USGS Peak Flow File (PFF) hosted as part of NWISWeb (the USGS public Web interface to much of the data stored and managed within the National Water Information System or NWIS). Checks embedded in the program are recommended as part of a more comprehensive assessment of peak flow data that will eventually include examination of possible regional changes, seasonal changes, and decadal variations in magnitude, timing, and frequency. Just as important as the comprehensive assessment, cleaning up the database will increase the likelihood of improved WSC regional flood-frequency equations. As an example of the value of cleaning up the PFF, data for 26,921 sites in the PFF were obtained. Of those sites, 17,542 sites had peak streamflow values and daily values. For the 17,542 sites, 1,097 peaks were identified that were less than the daily value for the day on which the peak occurred. Of the 26,921 sites, 11,643 had peak streamflow values, concurrent daily values, and at least 10 peaks. At the 11,643 sites, 2,205 peaks were identified as potential outliers in a regression of peak streamflows on daily values. Previous efforts to identify problems with the PFF were time consuming, laborious, and often ineffective. This new suite of checks represents an effort to automate identification of specific problems without plotting or printing large amounts of data that may not have problems. In addition, the results of the checks of the peak flow files are delivered through the World Wide Web with links to individual reports so that WSCs can focus on specific problems in an organized and standardized fashion. Over the years, technical reviews, regional-flood studies, and user inquiries have identified many minor and some major problems in the PFF. However, the cumbersome nature of the PFF editor and a lack of analytical tools have hampered efforts at quality assurance/quality control (QA/QC) and subsequently to make needed revisions to the database. This document is organized to provide information regarding PFReports, especially those tests involving regression and to provide an overview of the review procedures for utilizing the output. It also may be used as a reference for the data qualification codes and abbreviations for the tests. Results of the checks for all peak flow files (March 2008) are available at http://nd.water.usgs.gov/internal/pfreports/.

Vein-style air pumping tube and tire system and method of assembly

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benedict, Robert Leon; Gobinath, Thulasiram; Lin, Cheng-Hsiung

An air pumping tube and tire system and method of assembling is provided in which a tire groove is formed to extend into a flexing region of a tire sidewall and a complementary air pumping tube inserts into the tire groove. In the green, uncured air pumping tube condition, one or more check valves are assembled into the air pumping tube through access shafts and align with an internal air passageway of the air pumping tube. Plug components of the system enclose the check valves in the air pumping tube and the check valve-containing green air pumping tube is thenmore » cured.« less

Class Model Development Using Business Rules

NASA Astrophysics Data System (ADS)

Skersys, Tomas; Gudas, Saulius

New developments in the area of computer-aided system engineering (CASE) greatly improve processes of the information systems development life cycle (ISDLC). Much effort is put into the quality improvement issues, but IS development projects still suffer from the poor quality of models during the system analysis and design cycles. At some degree, quality of models that are developed using CASE tools can be assured using various. automated. model comparison, syntax. checking procedures. It. is also reasonable to check these models against the business domain knowledge, but the domain knowledge stored in the repository of CASE tool (enterprise model) is insufficient (Gudas et al. 2004). Involvement of business domain experts into these processes is complicated because non- IT people often find it difficult to understand models that were developed by IT professionals using some specific modeling language.

Problems associated with substandard and counterfeit drugs in developing countries: a review article on global implications of counterfeit drugs in the era of antiretroviral (ARVs) drugs in a free market economy.

PubMed

Nsimba, Stephen E D

2008-12-01

To review the global implications associated with the use of substandard and or counterfeit drugs in developing and may be developed countries. The focus of this review is particularly on antiretroviral (ARVs), antimalarials and other drugs. Review of various literatures through Pub-Med, Medline, Google and Internet search to retrieve and download published materials was done by the author of this review paper. When patients receive a counterfeit medicines, they are subjected to multiple risks. They often suffer more than just an inconvenience; as they become victims of fraud medicines and are all put at risk of adverse effects from unprescribed medicines or substandard ingredients. Additionally, patients may lose confidence in health care professionals including their physician and pharmacist, and potentially modern medicine or the pharmaceutical industry in general. Counterfeit or substandard (poor quality) drugs pose threats to society; not only to the individual in terms of the health side effects experienced, but also to the public in terms of trade relations, economic implications, and the effects on global pandemics. It is vital for suppliers, providers, and patients to be aware of current trends in counterfeiting in order to best prepare for encounters with suspicious products. Furthermore, this is an issue that needs to be continually dealt with on national and international policy levels. Developing countries should try their level best to establish good laboratories for monitoring and checking quality of all pharmaceuticals manufactured locally and those imported or donated to these countries. The Ministries of Health and all stakeholders involved in this issue must ensure that all drugs meet the set or established international standards and national standards. Failure to do so will be to misuse the hard earned forex that is normally borrowed from banks for the procurement and distribution of drugs to its people. Indeed sub-standard medications do more harm than good to people's health and it is unethical to give such drugs to people. Of course, in any market, some corruption and fraud always exist, but there are few commercial markets where fraud can have such drastic impact on global health and welfare. It is essential, therefore, that a multi-faceted approach be used to control this problem which affects the international community and continuously threatens the health of millions of people especially in developing countries. Developing countries should try their best at all costs establish good laboratories for monitoring or checking for quality control for all pharmaceuticals locally manufactured and those imported (entering) or donated to countries to make sure that they meet the set or established international or national standards. Short of that countries will be wasting a lot of money using forex which has been borrowed in a form a loans procuring and distributing to its people sub-standard medications which will do more harm than good to its indigenous people and this is unethical per se to give people drugs not meeting required set international standards.

Data quality in a DRG-based information system.

PubMed

Colin, C; Ecochard, R; Delahaye, F; Landrivon, G; Messy, P; Morgon, E; Matillon, Y

1994-09-01

The aim of this study initiated in May 1990 was to evaluate the quality of the medical data collected from the main hospital of the "Hospices Civils de Lyon", Edouard Herriot Hospital. We studied a random sample of 593 discharge abstracts from 12 wards of the hospital. Quality control was performed by checking multi-hospitalized patients' personal data, checking that each discharge abstract was exhaustive, examining the quality of abstracting, studying diagnoses and medical procedures coding, and checking data entry. Assessment of personal data showed a 4.4% error rate. It was mainly accounted for by spelling mistakes in surnames and first names, and mistakes in dates of birth. The quality of a discharge abstract was estimated according to the two purposes of the medical information system: description of hospital morbidity per patient and Diagnosis Related Group's case mix. Error rates in discharge abstracts were expressed in two ways: an overall rate for errors of concordance between Discharge Abstracts and Medical Records, and a specific rate for errors modifying classification in Diagnosis Related Groups (DRG). For abstracting medical information, these error rates were 11.5% (SE +/- 2.2) and 7.5% (SE +/- 1.9) respectively. For coding diagnoses and procedures, they were 11.4% (SE +/- 1.5) and 1.3% (SE +/- 0.5) respectively. For data entry on the computerized data base, the error rate was 2% (SE +/- 0.5) and 0.2% (SE +/- 0.05). Quality control must be performed regularly because it demonstrates the degree of participation from health care teams and the coherence of the database.(ABSTRACT TRUNCATED AT 250 WORDS)

More than 20 years of research into the quality of life of people with HIV and AIDS--a descriptive review of study characteristics and methodological approaches of published empirical studies.

PubMed

Drewes, Jochen; Gusy, Burkhard; Rüden, Ursula von

2013-01-01

The quality of life of people living with HIV and AIDS (PLWHA) is becoming increasingly important--a fact that is also reflected in extensive research efforts. Owing to the almost complete lack of systematic integration of research findings, it is hardly possible to provide an overview of the current status of research, or to derive valid statements about research results. A literature search regarding the quality of life of PLWHA was performed in two international research databases. After checking their relevance, 852 publications appearing in scientific journals and explicitly measuring the quality of life of PLWHA were categorized on the basis of various study characteristics. The number of publications per year in our study pool has been rising steadily since 1989. Well over 40 established instruments were used to determine the quality of life, most frequently the MOS-HIV, followed by the SF-36. The great majority of the studies are correlation studies. CD4 cells, gender, and age are the most common variables for which correlations with quality of life are reported. Our descriptive review stresses both the increasing significance and the challenges of research into quality of life of PLWHA such as the great variety of instruments used. The limits of this review are discussed and we conclude with the formulation of research desiderata concerning comparative review studies on instruments and systematic reviews of frequent research questions.

SU-F-T-238: Analyzing the Performance of MapCHECK2 and Delta4 Quality Assurance Phantoms in IMRT and VMAT Plans

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lu, SH; Tsai, YC; Lan, HT

2016-06-15

Purpose: Intensity-modulated radiotherapy (IMRT) and volumetric modulated arc therapy (VMAT) have been widely investigated for use in radiotherapy and found to have a highly conformal dose distribution. Delta{sup 4} is a novel cylindrical phantom consisting of 1069 p-type diodes with true treatments measured in the 3D target volume. The goal of this study was to compare the performance of a Delta{sup 4} diode array for IMRT and VMAT planning with ion chamber and MapCHECK2. Methods: Fifty-four IMRT (n=9) and VMAT (n=45) plans were imported to Philips Pinnacle Planning System 9.2 for recalculation with a solid water phantom, MapCHECK2, and themore » Delta4 phantom. To evaluate the difference between the measured and calculated dose, we used MapCHECK2 and Delta{sup 4} for a dose-map comparison and an ion chamber (PTW 31010 Semiflex 0.125 cc) for a point-dose comparison. Results: All 54 plans met the criteria of <3% difference for the point dose (at least two points) by ion chamber. The mean difference was 0.784% with a standard deviation of 1.962%. With a criteria of 3 mm/3% in a gamma analysis, the average passing rates were 96.86%±2.19% and 98.42%±1.97% for MapCHECK2 and Delta{sup 4}, respectively. The student t-test of MapCHECK2/Delta{sup 4}, ion chamber/Delta{sup 4}, and ion chamber/MapCHECK2 were 0.0008, 0.2944, and 0.0002, respectively. There was no significant difference in passing rates between MapCHECK2 and Delta{sup 4} for the IMRT plan (p = 0.25). However, a higher pass rate was observed in Delta{sup 4} (98.36%) as compared to MapCHECK2 (96.64%, p < 0.0001) for the VMAT plan. Conclusion: The Pinnacle planning system can accurately calculate doses for VMAT and IMRT plans. The Delta{sup 4} shows a similar result when compared to ion chamber and MapCHECK2, and is an efficient tool for patient-specific quality assurance, especially for rotation therapy.« less

Graduate International Students' Social Experiences Examined through Their Transient Lives: A Phenomenological Study at a Private Research University in the United States

ERIC Educational Resources Information Center

Kashyap, Nishmin Balsara

2011-01-01

This is a phenomenological study of ten graduate international students at Chardin University (pseudonym). Through 30 in-depth interviews, multiple social contacts, and group and member checking sessions, stories emerged that highlight the social experiences of these graduate international students through their transient lives. For the purposes…

Recall intervals for oral health in primary care patients.

PubMed

Beirne, P; Forgie, A; Clarkson, Je; Worthington, H V

2005-04-18

The frequency with which patients should attend for a dental check-up and the potential effects on oral health of altering recall intervals between check-ups have been the subject of ongoing international debate for almost 3 decades. Although recommendations regarding optimal recall intervals vary between countries and dental healthcare systems, 6-monthly dental check-ups have traditionally been advocated by general dental practitioners in many developed countries. To determine the beneficial and harmful effects of different fixed recall intervals (for example 6 months versus 12 months) for the following different types of dental check-up: a) clinical examination only; b) clinical examination plus scale and polish; c) clinical examination plus preventive advice; d) clinical examination plus preventive advice plus scale and polish. To determine the relative beneficial and harmful effects between any of these different types of dental check-up at the same fixed recall interval. To compare the beneficial and harmful effects of recall intervals based on clinicians' assessment of patients' disease risk with fixed recall intervals. To compare the beneficial and harmful effects of no recall interval/patient driven attendance (which may be symptomatic) with fixed recall intervals. We searched the Cochrane Oral Health Group Trials Register, the Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE and EMBASE. Reference lists from relevant articles were scanned and the authors of some papers were contacted to identify further trials and obtain additional information. Date of most recent searches: 9th April 2003. Trials were selected if they met the following criteria: design- random allocation of participants; participants - all children and adults receiving dental check-ups in primary care settings, irrespective of their level of risk for oral disease; interventions -recall intervals for the following different types of dental check-ups: a) clinical examination only; b) clinical examination plus scale and polish; c) clinical examination plus preventive advice; d) clinical examination plus scale and polish plus preventive advice; e) no recall interval/patient driven attendance (which may be symptomatic); f) clinician risk-based recall intervals; outcomes - clinical status outcomes for dental caries (including, but not limited to, mean dmft/DMFT, dmfs/DMFS scores, caries increment, filled teeth (including replacement restorations), early carious lesions arrested or reversed); periodontal disease (including, but not limited to, plaque, calculus, gingivitis, periodontitis, change in probing depth, attachment level); oral mucosa (presence or absence of mucosal lesions, potentially malignant lesions, cancerous lesions, size and stage of cancerous lesions at diagnosis). In addition the following outcomes were considered where reported: patient-centred outcomes, economic cost outcomes, other outcomes such as improvements in oral health knowledge and attitudes, harms, changes in dietary habits and any other oral health-related behavioural change. Information regarding methods, participants, interventions, outcome measures and results were independently extracted, in duplicate, by two authors. Authors were contacted, where deemed necessary and where possible, for further details regarding study design and for data clarification. A quality assessment of the included trial was carried out. The Cochrane Oral Health Group's statistical guidelines were followed. Only one study (with 188 participants) was included in this review and was assessed as having a high risk of bias. This study provided limited data for dental caries outcomes (dmfs/DMFS increment) and economic cost outcomes (reported time taken to provide examinations and treatment). There is insufficient evidence from randomised controlled trials (RCTs) to draw any conclusions regarding the potential beneficial and harmful effects of altering the recall interval between dental check-ups. There is insufficient evidence to support or refute the practice of encouraging patients to attend for dental check-ups at 6-monthly intervals. It is important that high quality RCTs are conducted for the outcomes listed in this review in order to address the objectives of this review.

Data Quality Control of the French Permanent Broadband Network in the RESIF Framework.

NASA Astrophysics Data System (ADS)

Grunberg, M.; Lambotte, S.; Engels, F.

2014-12-01

In the framework of the RESIF (Réseau Sismologique et géodésique Français) project, a new information system is setting up, allowing the improvement of the management and the distribution of high quality data from the different elements of RESIF. Within this information system, EOST (in Strasbourg) is in charge of collecting real-time permanent broadband seismic waveform, and performing Quality Control on these data. The real-time and validated data set are pushed to the French National Distribution Center (Isterre/Grenoble) to make them publicly available. Furthermore EOST hosts the BCSF-ReNaSS, in charge of the French metropolitan seismic bulletin. This allows to benefit from some high-end quality control based on the national and world-wide seismicity. Here we present the real-time seismic data flow from the stations of the French National Broad Band Network to EOST, and then, the data Quality Control procedures that were recently installed, including some new developments.The data Quality Control consists in applying a variety of processes to check the consistency of the whole system from the stations to the data center. This allows us to verify that instruments and data transmission are operating correctly. Moreover, time quality is critical for most of the scientific data applications. To face this challenge and check the consistency of polarities and amplitudes, we deployed several high-end processes including a noise correlation procedure to check for timing accuracy (intrumental time errors result in a time-shift of the whole cross-correlation, clearly distinct from those due to change in medium physical properties), and a systematic comparison of synthetic and real data for teleseismic earthquakes of magnitude larger than 6.5 to detect timing errors as well as polarity and amplitude problems.

Health-related quality of life in young adults in education, employment, or training: development of the Japanese version of Pediatric Quality of Life Inventory (PedsQL) Generic Core Scales Young Adult Version.

PubMed

Kaneko, Mei; Sato, Iori; Soejima, Takafumi; Kamibeppu, Kiyoko

2014-09-01

The purpose of the study is to develop a Japanese version of the Pediatric Quality of Life Inventory (PedsQL) Generic Core Scales Young Adult Version (PedsQL-YA-J) and determine the feasibility, reliability, and validity of the scales. Translation equivalence and content validity were verified using back-translation and cognitive debriefing tests. A total of 428 young adults recruited from one university, two vocational schools, or five companies completed questionnaires. We determined questionnaire feasibility, internal consistency, and test-retest reliability; checked concurrent validity against the Center for Epidemiologic Studies Depression Scale (CES-D); determined convergent and discriminant validity with the Medical Outcome Study 36-item Short Form Health Survey (SF-36); described known-groups validity with regard to subjective symptoms, illness or injury requiring regular medical visits, and depression; and verified factorial validity. All scales were internally consistent (Cronbach's coefficient alpha = 0.77-0.86); test-retest reliability was acceptable (intraclass correlation coefficient = 0.57-0.69); and all scales were concurrently valid with depression (Pearson's correlation coefficient = 0.43-0.57). The scales convergent and discriminant validity with the SF-36 and CES-D were acceptable. Evaluation of known-groups validity confirmed that the Physical Functioning scale was sensitive for subjective symptoms, the Emotional Functioning scale for depression, and the Work/School Functioning scale for illness or injury requiring regular medical visits. Exploratory factor analysis found a six-factor structure consistent with the assumed structure (cumulative proportion = 57.0%). The PedsQL-YA-J is suitable for assessing health-related quality of life in young adults in education, employment, or training, and for clinical trials and epidemiological research.

Standard Reference Specimens in Quality Control of Engineering Surfaces

PubMed Central

Song, J. F.; Vorburger, T. V.

1991-01-01

In the quality control of engineering surfaces, we aim to understand and maintain a good relationship between the manufacturing process and surface function. This is achieved by controlling the surface texture. The control process involves: 1) learning the functional parameters and their control values through controlled experiments or through a long history of production and use; 2) maintaining high accuracy and reproducibility with measurements not only of roughness calibration specimens but also of real engineering parts. In this paper, the characteristics, utilizations, and limitations of different classes of precision roughness calibration specimens are described. A measuring procedure of engineering surfaces, based on the calibration procedure of roughness specimens at NIST, is proposed. This procedure involves utilization of check specimens with waveform, wavelength, and other roughness parameters similar to functioning engineering surfaces. These check specimens would be certified under standardized reference measuring conditions, or by a reference instrument, and could be used for overall checking of the measuring procedure and for maintaining accuracy and agreement in engineering surface measurement. The concept of “surface texture design” is also suggested, which involves designing the engineering surface texture, the manufacturing process, and the quality control procedure to meet the optimal functional needs. PMID:28184115

[Evaluation of the quality of clinical practice guidelines published in the Annales de Biologie Clinique with the help of the EFLM checklist].

PubMed

Wils, Julien; Fonfrède, Michèle; Augereau, Christine; Watine, Joseph

2014-01-01

Several tools are available to help evaluate the quality of clinical practice guidelines (CPG). The AGREE instrument (Appraisal of guidelines for research & evaluation) is the most consensual tool but it has been designed to assess CPG methodology only. The European federation of laboratory medicine (EFLM) recently designed a check-list dedicated to laboratory medicine which is supposed to be comprehensive and which therefore makes it possible to evaluate more thoroughly the quality of CPG in laboratory medicine. In the present work we test the comprehensiveness of this check-list on a sample of CPG written in French and published in Annales de biologie clinique (ABC). Thus we show that some work remains to be achieved before a truly comprehensive check-list is designed. We also show that there is some room for improvement for the CPG published in ABC, for example regarding the fact that some of these CPG do not provide any information about allowed durations of transport and of storage of biological samples before analysis, or about standards of minimal analytical performance, or about the sensitivities or the specificities of the recommended tests.

Statistical Quality Control of Moisture Data in GEOS DAS

NASA Technical Reports Server (NTRS)

Dee, D. P.; Rukhovets, L.; Todling, R.

1999-01-01

A new statistical quality control algorithm was recently implemented in the Goddard Earth Observing System Data Assimilation System (GEOS DAS). The final step in the algorithm consists of an adaptive buddy check that either accepts or rejects outlier observations based on a local statistical analysis of nearby data. A basic assumption in any such test is that the observed field is spatially coherent, in the sense that nearby data can be expected to confirm each other. However, the buddy check resulted in excessive rejection of moisture data, especially during the Northern Hemisphere summer. The analysis moisture variable in GEOS DAS is water vapor mixing ratio. Observational evidence shows that the distribution of mixing ratio errors is far from normal. Furthermore, spatial correlations among mixing ratio errors are highly anisotropic and difficult to identify. Both factors contribute to the poor performance of the statistical quality control algorithm. To alleviate the problem, we applied the buddy check to relative humidity data instead. This variable explicitly depends on temperature and therefore exhibits a much greater spatial coherence. As a result, reject rates of moisture data are much more reasonable and homogeneous in time and space.

[Job stress and quality of life of primary care health-workers: evidence of validity of the PECVEC questionnaire].

PubMed

Fernández-López, Juan Antonio; Fernández-Fidalgo, María; Martín-Payo, Rubén; Rödel, Andreas

2007-08-01

To evaluate the relationship between Health-Related Quality of Life (HRQL) and stress at work among Primary Care workers, as evidence of the construct validity of the Spanish version (PECVEC) of the profile of quality of life in the chronically ill (PLC) questionnaire. In addition, to check its other psychometric properties. Cross-sectional study. Eighteen primary care centres in Health Area IV, Asturias (Oviedo), Spain, sharing similar socio-demographic conditions. Two hundred and thirty-three primary care nurses and physicians. HRQL was evaluated by the 6 general dimensions of the Spanish version of the PLC. Stress at work was evaluated by the three scales of the Effort-Reward Imbalance (ERI) questionnaire. The construct validity of the PECVEC was assessed by testing the inverse associations of QoL dimensions and job stress ones, when the most important confuser variables were monitored. The non-response rate was low (<3%), and no floor effects and only small ceiling effects were observed. Internal consistency analysis and exploratory and confirmatory factor analysis demonstrated high reliability, factorial validity and convergent/divergent validity of the PECVEC. The PECVEC demonstrates adequate psychometric properties for evaluating HRQL in healthy subjects.

Assessment of a condition-specific quality-of-life measure for patients with developmentally absent teeth: validity and reliability testing.

PubMed

Akram, A J; Ireland, A J; Postlethwaite, K C; Sandy, J R; Jerreat, A S

2013-11-01

This article describes the process of validity and reliability testing of a condition-specific quality-of-life measure for patients with hypodontia presenting for orthodontic treatment. The development of the instrument is described in a previous article. Royal Devon and Exeter NHS Foundation Trust & Musgrove Park Hospital, Taunton. The child perception questionnaire was used as a standard against which to test criterion validity. The Bland and Altman method was used to check agreement between the two questionnaires. Construct validity was tested using principal component analysis on the four sections of the questionnaire. Test-retest reliability was tested using intraclass correlation coefficient and Bland and Altman method. Cronbach's alpha was used to test internal consistency reliability. Overall the questionnaire showed good reliability, criterion and construct validity. This together with previous evidence of good face and content validity suggests that the instrument may prove useful in clinical practice and further research. This study has demonstrated that the newly developed condition-specific quality-of-life questionnaire is both valid and reliable for use in young patients with hypodontia. © 2013 John Wiley & Sons A/S. Published by Blackwell Publishing Ltd.

Psychometric properties of the Body Checking Questionnaire in college women.

PubMed

White, Emily K; Claudat, Kim; Jones, Sarah C; Barchard, Kimberly A; Warren, Cortney S

2015-03-01

While the Body Checking Questionnaire (BCQ; Reas et al., 2002) is the most commonly-used measure of body checking behaviors, findings on the factor structure in nonclinical samples are mixed. This study investigated the factor structure and psychometric properties of the BCQ among nonclinical college women. In Study 1 (n=326), an exploratory factor analysis indicated factors corresponding to (a) behavioral and (b) visual checking. In Study 2 (n=1013), a confirmatory factor analysis revealed adequate fit for these factors, better than the original or total score solutions. Scales based upon the two factors demonstrated good internal consistency, convergent validity with measures of eating pathology, and sensitivity for detecting at-risk eating pathology. Results suggest an alternate two-factor solution that differs from the original three-factor solution. Copyright © 2015. Published by Elsevier Ltd.

SU-F-T-165: Daily QA Analysis for Spot Scanning Beamline

DOE Office of Scientific and Technical Information (OSTI.GOV)

Poenisch, F; Gillin, M; Sahoo, N

2016-06-15

Purpose: The dosimetric results of our daily quality assurance over the last 8 years for discrete pencil beam scanning proton therapy will be presented. Methods: To perform the dosimetric checks, a multi-ion chamber detector is used, which consists of an array of 5 single parallel plate ion chambers that are aligned as a cross separated by 10cm each. The Tracker is snapped into a jig, which is placed on the tabletop. Different amounts of Solid Water buildup are added to shift the dose distribution. The dosimetric checks consist of 3 parts: position check, range check and volume dose check. Results:more » The average deviation of all position-check data were 0.2±1.3%. For the range check, the average deviation was 0.1%±1.2%, which also corresponds to a range stability of better than 1 mm over all measurements. The volumetric dose output readings were all within ±1% with the exception of 2 occasions when the cable to the dose monitor was being repaired. Conclusion: Morning QA using the Tracker device gives very stable dosimetric readings but is also sensitive to mechanical and output changes in the proton therapy delivery system.« less

46 CFR 160.115-9 - Preapproval review.

Code of Federal Regulations, 2012 CFR

2012-10-01

... inventory of materials; (iii) The method for checking quality of fabrication and joints, including welding... §§ 160.115-19 and 160.115-21 of this subpart; (5) A description of the quality control procedures and... between the independent laboratory and Commandant under 46 CFR part 159, subpart 159.010. (d) Plan quality...

46 CFR 160.115-9 - Preapproval review.

Code of Federal Regulations, 2014 CFR

2014-10-01

... inventory of materials; (iii) The method for checking quality of fabrication and joints, including welding... §§ 160.115-19 and 160.115-21 of this subpart; (5) A description of the quality control procedures and... between the independent laboratory and Commandant under 46 CFR part 159, subpart 159.010. (d) Plan quality...

46 CFR 160.115-9 - Preapproval review.

Code of Federal Regulations, 2013 CFR

2013-10-01

... inventory of materials; (iii) The method for checking quality of fabrication and joints, including welding... §§ 160.115-19 and 160.115-21 of this subpart; (5) A description of the quality control procedures and... between the independent laboratory and Commandant under 46 CFR part 159, subpart 159.010. (d) Plan quality...

Wheat Quality Council, Hard Spring Wheat Technical Committee, 2015 Crop

USDA-ARS?s Scientific Manuscript database

Nine experimental lines of hard spring wheat were grown at up to five locations in 2015 and evaluated for kernel, milling, and bread baking quality against the check variety Glenn. Wheat samples were submitted through the Wheat Quality Council and processed and milled at the USDA-ARS Hard Red Sprin...

Wheat Quality Council, Hard Spring Wheat Technical Committee, 2017 Crop

USDA-ARS?s Scientific Manuscript database

Nine experimental lines of hard spring wheat were grown at up to six locations in 2017 and evaluated for kernel, milling, and bread baking quality against the check variety Glenn. Wheat samples were submitted through the Wheat Quality Council and processed and milled at the USDA-ARS Hard Red Spring...

Wheat Quality Council, Hard Spring Wheat Technical Committee, 2014 Crop

USDA-ARS?s Scientific Manuscript database

Eleven experimental lines of hard spring wheat were grown at up to five locations in 2014 and evaluated for kernel, milling, and bread baking quality against the check variety Glenn. Wheat samples were submitted through the Wheat Quality Council and processed and milled at the USDA-ARS Hard Red Spr...

Qualities of Early Childhood Teachers: Reflections from Teachers and Administrators.

ERIC Educational Resources Information Center

Weitman, Catheryn J.; Humphries, Janie H.

Data were collected from elementary school principals and kindergarten teachers in Texas and Louisiana in an effort to identify qualities that are thought to be important for kindergarten teachers. A questionnaire listing 462 qualities of early childhood teachers was compiled from literature reviews. Subjects were asked to check a maximum of 50…

40 CFR 85.2233 - Steady state test equipment calibrations, adjustments, and quality control-EPA 91.

Code of Federal Regulations, 2013 CFR

2013-07-01

... tolerance range. The pressure in the sample cell must be the same with the calibration gas flowing during... this chapter. The check is done at 30 mph (48 kph), and a power absorption load setting to generate a... in § 85.2225(c)(1) are not met. (2) Leak checks. Each time the sample line integrity is broken, a...

40 CFR 85.2233 - Steady state test equipment calibrations, adjustments, and quality control-EPA 91.

Code of Federal Regulations, 2011 CFR

2011-07-01

... tolerance range. The pressure in the sample cell must be the same with the calibration gas flowing during... this chapter. The check is done at 30 mph (48 kph), and a power absorption load setting to generate a... in § 85.2225(c)(1) are not met. (2) Leak checks. Each time the sample line integrity is broken, a...

40 CFR 85.2233 - Steady state test equipment calibrations, adjustments, and quality control-EPA 91.

Code of Federal Regulations, 2012 CFR

2012-07-01

... tolerance range. The pressure in the sample cell must be the same with the calibration gas flowing during... this chapter. The check is done at 30 mph (48 kph), and a power absorption load setting to generate a... in § 85.2225(c)(1) are not met. (2) Leak checks. Each time the sample line integrity is broken, a...

Prediction Interval Development for Wind-Tunnel Balance Check-Loading

NASA Technical Reports Server (NTRS)

Landman, Drew; Toro, Kenneth G.; Commo, Sean A.; Lynn, Keith C.

2014-01-01

Results from the Facility Analysis Verification and Operational Reliability project revealed a critical gap in capability in ground-based aeronautics research applications. Without a standardized process for check-loading the wind-tunnel balance or the model system, the quality of the aerodynamic force data collected varied significantly between facilities. A prediction interval is required in order to confirm a check-loading. The prediction interval provides an expected upper and lower bound on balance load prediction at a given confidence level. A method has been developed which accounts for sources of variability due to calibration and check-load application. The prediction interval method of calculation and a case study demonstrating its use is provided. Validation of the methods is demonstrated for the case study based on the probability of capture of confirmation points.

Admitting international graduate nursing students: what faculty need to know.

PubMed

Genovese, S Kim; Schmidt, Nola A; Brown, Janet M

2015-01-01

The number of international applicants to US nursing graduate programs is increasing. Modifying standard admission criteria, such as RN licensure, graduate record examination, validation of BSN degree, criminal background check, letters of recommendation, and personal statements, is necessary because of unique complexities. Addressing admission requirements unique to international students, such as English proficiency, visas, and proof of financial resources, is critical. Managing complexities of admitting international students is necessary to facilitate their success.

Fiber optics in composite materials: materials with nerves of glass

NASA Astrophysics Data System (ADS)

Measures, Raymond M.

1990-08-01

A Fiber Optic BasedSmart Structure wiipossess a structurally integrated optical microsensor system for determining its state. This built-in sensor system should, in real-time, be able to: evaluate the strain or deformation of a structure, monitor if its vibrating or subject to excessive loads, check its temperature and warn of the appearance of any hot spots. In addition a Smart Structure should maintain a vigilant survelliance over its structural integrity. The successful development of Smart StructureTechnolgy could lead to: aircraft that are safer, lighter, more efficient, easier to maintain and to service; pipelines, pressure vessels and storage tanks that constantly monitor their structuralintegrity and immediately issue an alert ifany problem is detected; space platforms that check forpressure leaks, unwanted vibration, excess thermal buildup, and deviation from some preassigned shape.This technology is particularly appropriate for composite materials where internal damage generated by: impacts, manufacturing flaws, excessive loading or fatigue could be detected and assessed. In service monitoring of structural loads, especially in regions like wing roots of aircraft, could be ofconsiderable benefit in helping to avoid structural overdesign and reduce weight. Structurally imbedded optical fibers sensors might also serve to monitor the cure state of composite thermosets during their fabrication and thereby contribute to improved quality control of these products.

Ultrasound use during cardiopulmonary resuscitation is associated with delays in chest compressions.

PubMed

Huis In 't Veld, Maite A; Allison, Michael G; Bostick, David S; Fisher, Kiondra R; Goloubeva, Olga G; Witting, Michael D; Winters, Michael E

2017-10-01

High-quality chest compressions are a critical component of the resuscitation of patients in cardiopulmonary arrest. Point-of-care ultrasound (POCUS) is used frequently during emergency department (ED) resuscitations, but there has been limited research assessing its benefits and harms during the delivery of cardiopulmonary resuscitation (CPR). We hypothesized that use of POCUS during cardiac arrest resuscitation adversely affects high-quality CPR by lengthening the duration of pulse checks beyond the current cardiopulmonary resuscitation guidelines recommendation of 10s. We conducted a prospective cohort study of adults in cardiac arrest treated in an urban ED between August 2015 and September 2016. Resuscitations were recorded using video equipment in designated resuscitation rooms, and the use of POCUS was documented and timed. A linear mixed-effects model was used to estimate the effect of POCUS on pulse check duration. Twenty-three patients were enrolled in our study. The mean duration of pulse checks with POCUS was 21.0s (95% CI, 18-24) compared with 13.0s (95% CI, 12-15) for those without POCUS. POCUS increased the duration of pulse checks and CPR interruption by 8.4s (95% CI, 6.7-10.0 [p<0.0001]). Age, body mass index (BMI), and procedures did not significantly affect the duration of pulse checks. The use of POCUS during cardiac arrest resuscitation was associated with significantly increased duration of pulse checks, nearly doubling the 10-s maximum duration recommended in current guidelines. It is important for acute care providers to pay close attention to the duration of interruptions in the delivery of chest compressions when using POCUS during cardiac arrest resuscitation. Copyright © 2017 Elsevier B.V. All rights reserved.

Whole grain cereals for the primary or secondary prevention of cardiovascular disease.

PubMed

Kelly, Sarah Am; Hartley, Louise; Loveman, Emma; Colquitt, Jill L; Jones, Helen M; Al-Khudairy, Lena; Clar, Christine; Germanò, Roberta; Lunn, Hannah R; Frost, Gary; Rees, Karen

2017-08-24

There is evidence from observational studies that whole grains can have a beneficial effect on risk for cardiovascular disease (CVD). Earlier versions of this review found mainly short-term intervention studies. There are now longer-term randomised controlled trials (RCTs) available. This is an update and expansion of the original review conducted in 2007. The aim of this systematic review was to assess the effect of whole grain foods or diets on total mortality, cardiovascular events, and cardiovascular risk factors (blood lipids, blood pressure) in healthy people or people who have established cardiovascular disease or related risk factors, using all eligible RCTs. We searched CENTRAL (Issue 8, 2016) in the Cochrane Library, MEDLINE (1946 to 31 August 2016), Embase (1980 to week 35 2016), and CINAHL Plus (1937 to 31 August 2016) on 31 August 2016. We also searched ClinicalTrials.gov on 5 July 2017 and the World Health Organization International Clinical Trials Registry Platform (WHO ICTRP) on 6 July 2017. We checked reference lists of relevant articles and applied no language restrictions. We selected RCTs assessing the effects of whole grain foods or diets containing whole grains compared to foods or diets with a similar composition, over a minimum of 12 weeks, on cardiovascular disease and related risk factors. Eligible for inclusion were healthy adults, those at increased risk of CVD, or those previously diagnosed with CVD. Two review authors independently selected studies. Data were extracted and quality-checked by one review author and checked by a second review author. A second review author checked the analyses. We assessed treatment effect using mean difference in a fixed-effect model and heterogeneity using the I 2 statistic and the Chi 2 test of heterogeneity. We assessed the overall quality of evidence using GRADE with GRADEpro software. We included nine RCTs randomising a total of 1414 participants (age range 24 to 70; mean age 45 to 59, where reported) to whole grain versus lower whole grain or refined grain control groups. We found no studies that reported the effect of whole grain diets on total cardiovascular mortality or cardiovascular events (total myocardial infarction, unstable angina, coronary artery bypass graft surgery, percutaneous transluminal coronary angioplasty, total stroke). All included studies reported the effect of whole grain diets on risk factors for cardiovascular disease including blood lipids and blood pressure. All studies were in primary prevention populations and had an unclear or high risk of bias, and no studies had an intervention duration greater than 16 weeks.Overall, we found no difference between whole grain and control groups for total cholesterol (mean difference 0.07, 95% confidence interval -0.07 to 0.21; 6 studies (7 comparisons); 722 participants; low-quality evidence).Using GRADE, we assessed the overall quality of the available evidence on cholesterol as low. Four studies were funded by independent national and government funding bodies, while the remaining studies reported funding or partial funding by organisations with commercial interests in cereals. There is insufficient evidence from RCTs of an effect of whole grain diets on cardiovascular outcomes or on major CVD risk factors such as blood lipids and blood pressure. Trials were at unclear or high risk of bias with small sample sizes and relatively short-term interventions, and the overall quality of the evidence was low. There is a need for well-designed, adequately powered RCTs with longer durations assessing cardiovascular events as well as cardiovascular risk factors.

Litho hotspots fixing using model based algorithm

NASA Astrophysics Data System (ADS)

Zhang, Meili; Yu, Shirui; Mao, Zhibiao; Shafee, Marwa; Madkour, Kareem; ElManhawy, Wael; Kwan, Joe; Hu, Xinyi; Wan, Qijian; Du, Chunshan

2017-04-01

As technology advances, IC designs are getting more sophisticated, thus it becomes more critical and challenging to fix printability issues in the design flow. Running lithography checks before tapeout is now mandatory for designers, which creates a need for more advanced and easy-to-use techniques for fixing hotspots found after lithographic simulation without creating a new design rule checking (DRC) violation or generating a new hotspot. This paper presents a new methodology for fixing hotspots on layouts while using the same engine currently used to detect the hotspots. The fix is achieved by applying minimum movement of edges causing the hotspot, with consideration of DRC constraints. The fix is internally simulated by the lithographic simulation engine to verify that the hotspot is eliminated and that no new hotspot is generated by the new edge locations. Hotspot fix checking is enhanced by adding DRC checks to the litho-friendly design (LFD) rule file to guarantee that any fix options that violate DRC checks are removed from the output hint file. This extra checking eliminates the need to re-run both DRC and LFD checks to ensure the change successfully fixed the hotspot, which saves time and simplifies the designer's workflow. This methodology is demonstrated on industrial designs, where the fixing rate of single and dual layer hotspots is reported.

Geometric facial comparisons in speed-check photographs.

PubMed

Buck, Ursula; Naether, Silvio; Kreutz, Kerstin; Thali, Michael

2011-11-01

In many cases, it is not possible to call the motorists to account for their considerable excess in speeding, because they deny being the driver on the speed-check photograph. An anthropological comparison of facial features using a photo-to-photo comparison can be very difficult depending on the quality of the photographs. One difficulty of that analysis method is that the comparison photographs of the presumed driver are taken with a different camera or camera lens and from a different angle than for the speed-check photo. To take a comparison photograph with exactly the same camera setup is almost impossible. Therefore, only an imprecise comparison of the individual facial features is possible. The geometry and position of each facial feature, for example the distances between the eyes or the positions of the ears, etc., cannot be taken into consideration. We applied a new method using 3D laser scanning, optical surface digitalization, and photogrammetric calculation of the speed-check photo, which enables a geometric comparison. Thus, the influence of the focal length and the distortion of the objective lens are eliminated and the precise position and the viewing direction of the speed-check camera are calculated. Even in cases of low-quality images or when the face of the driver is partly hidden, good results are delivered using this method. This new method, Geometric Comparison, is evaluated and validated in a prepared study which is described in this article.

Comprehensive Auditing in Nuclear Medicine Through the International Atomic Energy Agency Quality Management Audits in Nuclear Medicine Program. Part 2: Analysis of Results.

PubMed

Dondi, Maurizio; Torres, Leonel; Marengo, Mario; Massardo, Teresa; Mishani, Eyal; Van Zyl Ellmann, Annare; Solanki, Kishor; Bischof Delaloye, Angelika; Lobato, Enrique Estrada; Miller, Rodolfo Nunez; Ordonez, Felix Barajas; Paez, Diana; Pascual, Thomas

2017-11-01

The International Atomic Energy Agency has developed a program, named Quality Management Audits in Nuclear Medicine (QUANUM), to help its Member States to check the status of their nuclear medicine practices and their adherence to international reference standards, covering all aspects of nuclear medicine, including quality assurance/quality control of instrumentation, radiopharmacy (further subdivided into levels 1, 2, and 3, according to complexity of work), radiation safety, clinical applications, as well as managerial aspects. The QUANUM program is based on both internal and external audits and, with specifically developed Excel spreadsheets, it helps assess the level of conformance (LoC) to those previously defined quality standards. According to their level of implementation, the level of conformance to requested standards; 0 (absent) up to 4 (full conformance). Items scored 0, 1, and 2 are considered non-conformance; items scored 3 and 4 are considered conformance. To assess results of the audit missions performed worldwide over the last 8 years, a retrospective analysis has been run on reports from a total of 42 audit missions in 39 centers, three of which had been re-audited. The analysis of all audit reports has shown an overall LoC of 73.9 ± 8.3% (mean ± standard deviation), ranging between 56.6% and 87.9%. The highest LoC has been found in the area of clinical services (83.7% for imaging and 87.9% for therapy), whereas the lowest levels have been found for Radiopharmacy Level 2 (56.6%); Computer Systems and Data Handling (66.6%); and Evaluation of the Quality Management System (67.6%). Prioritization of non-conformances produced a total of 1687 recommendations in the final audit report. Depending on the impact on safety and daily clinical activities, they were further classified as critical (requiring immediate action; n = 276; 16% of the total); major (requiring action in relatively short time, typically from 3 to 6 months; n = 604; 36%); whereas the remaining 807 (48%) were classified as minor, that is, to be addressed whenever possible. The greatest proportion of recommendations has been found in the category "Managerial, Organization and Documentation" (26%); "Staff Radiation Protection and Safety" (17.3%); "Radiopharmaceuticals Preparation, Dispensing and Handling" (15.8%); and "Quality Assurance/Quality Control" and "Management of Equipment and Software" (11.4%). The lowest level of recommendations belongs to the item "Human Resources" (4%). The QUANUM program proved applicable to a wide variety of institutions, from small practices to larger centers with PET/CT and cyclotrons. Clinical services rendered to patients showed a good compliance with international standards, whereas issues related to radiation protection of both staff and patients will require a higher degree of attention. This is a relevant feedback for the International Atomic Energy Agency with regard to the effective translation of safety recommendations into routine practice. Training on drafting and application of standard operating procedures should also be considered a priority. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

The Quality Control Algorithms Used in the Creation of NASA Kennedy Space Center Lightning Protection System Towers Meteorological Database

NASA Technical Reports Server (NTRS)

Orcutt, John M.; Brenton, James C.

2016-01-01

An accurate database of meteorological data is essential for designing any aerospace vehicle and for preparing launch commit criteria. Meteorological instrumentation were recently placed on the three Lightning Protection System (LPS) towers at Kennedy Space Center (KSC) launch complex 39B (LC-39B), which provide a unique meteorological dataset existing at the launch complex over an extensive altitude range. Data records of temperature, dew point, relative humidity, wind speed, and wind direction are produced at 40, 78, 116, and 139 m at each tower. The Marshall Space Flight Center Natural Environments Branch (EV44) received an archive that consists of one-minute averaged measurements for the period of record of January 2011 - April 2015. However, before the received database could be used EV44 needed to remove any erroneous data from within the database through a comprehensive quality control (QC) process. The QC process applied to the LPS towers' meteorological data is similar to other QC processes developed by EV44, which were used in the creation of meteorological databases for other towers at KSC. The QC process utilized in this study has been modified specifically for use with the LPS tower database. The QC process first includes a check of each individual sensor. This check includes removing any unrealistic data and checking the temporal consistency of each variable. Next, data from all three sensors at each height are checked against each other, checked against climatology, and checked for sensors that erroneously report a constant value. Then, a vertical consistency check of each variable at each tower is completed. Last, the upwind sensor at each level is selected to minimize the influence of the towers and other structures at LC-39B on the measurements. The selection process for the upwind sensor implemented a study of tower-induced turbulence. This paper describes in detail the QC process, QC results, and the attributes of the LPS towers meteorological database.

TU-D-201-06: HDR Plan Prechecks Using Eclipse Scripting API

DOE Office of Scientific and Technical Information (OSTI.GOV)

Palaniswaamy, G; Morrow, A; Kim, S

Purpose: Automate brachytherapy treatment plan quality check using Eclipse v13.6 scripting API based on pre-configured rules to minimize human error and maximize efficiency. Methods: The HDR Precheck system is developed based on a rules-driven approach using Eclipse scripting API. This system checks for critical plan parameters like channel length, first source position, source step size and channel mapping. The planned treatment time is verified independently based on analytical methods. For interstitial or SAVI APBI treatment plans, a Patterson-Parker system calculation is performed to verify the planned treatment time. For endobronchial treatments, an analytical formula from TG-59 is used. Acceptable tolerancesmore » were defined based on clinical experiences in our department. The system was designed to show PASS/FAIL status levels. Additional information, if necessary, is indicated appropriately in a separate comments field in the user interface. Results: The HDR Precheck system has been developed and tested to verify the treatment plan parameters that are routinely checked by the clinical physicist. The report also serves as a reminder or checklist for the planner to perform any additional critical checks such as applicator digitization or scenarios where the channel mapping was intentionally changed. It is expected to reduce the current manual plan check time from 15 minutes to <1 minute. Conclusion: Automating brachytherapy plan prechecks significantly reduces treatment plan precheck time and reduces human errors. When fully developed, this system will be able to perform TG-43 based second check of the treatment planning system’s dose calculation using random points in the target and critical structures. A histogram will be generated along with tabulated mean and standard deviation values for each structure. A knowledge database will also be developed for Brachyvision plans which will then be used for knowledge-based plan quality checks to further reduce treatment planning errors and increase confidence in the planned treatment.« less

Agricultural Baseline (BL0) scenario of the 2016 Billion-Ton Report

DOE Data Explorer

Davis, Maggie R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)] (ORCID:0000000181319328); Hellwinkel, Chad [University of Tennessee, APAC] (ORCID:0000000173085058); Eaton, Laurence [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)] (ORCID:0000000312709626); Langholtz, Matthew H [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)] (ORCID:0000000281537154); Turhollow, Anthony [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)] (ORCID:0000000228159350); Brandt, Craig [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)] (ORCID:0000000214707379); Myers, Aaron [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)] (ORCID:0000000320373827)

2016-07-13

Scientific reason for data generation: to serve as the reference case for the BT16 volume 1 agricultural scenarios. The agricultural baseline runs from 2015 through 2040; a starting year of 2014 is used. Date the data set was last modified: 02/12/2016 How each parameter was produced (methods), format, and relationship to other data in the data set: simulation was developed without offering a farmgate price to energy crops or residues (i.e., building on both the USDA 2015 baseline and the agricultural census data (USDA NASS 2014). Data generated are .txt output files by year, simulation identifier, county code (1-3109). Instruments used: POLYSYS (version POLYS2015_V10_alt_JAN22B) supplied by the University of Tennessee APAC The quality assurance and quality control that have been applied: • Check for negative planted area, harvested area, production, yield and cost values. • Check if harvested area exceeds planted area for annuals. • Check FIPS codes.

The Genome Austria Tissue Bank (GATiB).

PubMed

Asslaber, M; Abuja, P M; Stark, K; Eder, J; Gottweis, H; Trauner, M; Samonigg, H; Mischinger, H J; Schippinger, W; Berghold, A; Denk, H; Zatloukal, K

2007-01-01

In the context of the Austrian Genome Program, a tissue bank is being established (Genome Austria Tissue Bank, GATiB) which is based on a collection of diseased and corresponding normal tissues representing a great variety of diseases at their natural frequency of occurrence from a non-selected Central European population of more than 700,000 patients. Major emphasis is put on annotation of archival tissue with comprehensive clinical data, including follow-up data. A specific IT infrastructure supports sample annotation, tracking of sample usage as well as sample and data storage. Innovative data protection tools were developed which prevent sample donor re-identification, particularly if detailed medical and genetic data are combined. For quality control of old archival tissues, new techniques were established to check RNA quality and antigen stability. Since 2003, GATiB has changed from a population-based tissue bank to a disease-focused biobank comprising major cancers such as colon, breast, liver, as well as metabolic liver diseases and organs affected by the metabolic syndrome. Prospectively collected tissues are associated with blood samples and detailed data on the sample donor's disease, lifestyle and environmental exposure, following standard operating procedures. Major emphasis is also placed on ethical, legal and social issues (ELSI) related to biobanks. A specific research project and an international advisory board ensure the proper embedding of GATiB in society and facilitate international networking. (c) 2007 S. Karger AG, Basel.

Health websites in Italy: use, classification and international policy.

PubMed

Di Giacomo, Paola; Maceratini, Riccardo

2002-09-01

In this paper, we discuss international policy in relation to the use of health websites and we describe the results obtained from application of a search engine to the recognition and classification of health websites in Italy. We then compare the results with health websites in other countries. Effective use of technology has led to medical advances that have not only extended life expectancy, but also fuelled an increasingly well-informed public to expect more and more from today's healthcare providers. As a consequence of the Web's rapid, chaotic growth, the resulting network of information lacks organization and structure and the quest for a method of quickly finding relevant and reliable information is spawning the growth of Internet portal sites. The US and the European Union and now Italy, have established the importance of rules to check the quality of health sites both for the non-professional users (citizens), mainly for privacy and security (for example, of medical records); and for health operators (physicians and others), where the most important thing is to evaluate the quality of content. In June 2001, the search engine used here found 2627 Italian health sites, of which only 46 exhibited the HON Code, and they can be classified into: 1% personal medical sites, 17% health portals, 18%, metasites, 27% documental sites and 37% information sites for health operators and/or for citizens.

Efforts to Reduce International Space Station Crew Maintenance Time in the Management of the Extravehicular Mobility Unit Transport Loop Water Quality

NASA Technical Reports Server (NTRS)

Etter,David; Rector, Tony; Boyle, robert; Zande, Chris Vande

2012-01-01

The EMU (Extravehicular Mobility Unit) contains a semi-closed-loop re-circulating water circuit (Transport Loop) to absorb heat into a LCVG (Liquid Coolant and Ventilation Garment) worn by the astronaut. A second, single-pass water circuit (Feed-water Loop) provides water to a cooling device (Sublimator) containing porous plates, and that water sublimates through the porous plates to space vacuum. The cooling effect from the sublimation of this water translates to a cooling of the LCVG water that circulates through the Sublimator. The quality of the EMU Transport Loop water is maintained through the use of a water processing kit (ALCLR - Airlock Cooling Loop Remediation) that is used to periodically clean and disinfect the water circuit. Opportunities to reduce crew time associated with ALCLR operations include a detailed review of the historical water quality data for evidence to support an extension to the implementation cycle. Furthermore, an EMU returned after 2-years of use on the ISS (International Space Station) is being used as a test bed to evaluate the results of extended and repeated ALCLR implementation cycles. Finally, design, use and on-orbit location enhancements to the ALCLR kit components are being considered to allow the implementation cycle to occur in parallel with other EMU maintenance and check-out activities, and to extend the life of the ALCLR kit components. These efforts are undertaken to reduce the crew-time and logistics burdens for the EMU, while ensuring the long-term health of the EMU water circuits for a post- Shuttle 6-year service life.

Reasoning Based Quality Assurance of Medical Ontologies: A Case Study

PubMed Central

Horridge, Matthew; Parsia, Bijan; Noy, Natalya F.; Musenm, Mark A.

2014-01-01

The World Health Organisation is using OWL as a key technology to develop ICD-11 – the next version of the well-known International Classification of Diseases. Besides providing better opportunities for data integration and linkages to other well-known ontologies such as SNOMED-CT, one of the main promises of using OWL is that it will enable various forms of automated error checking. In this paper we investigate how automated OWL reasoning, along with a Justification Finding Service can be used as a Quality Assurance technique for the development of large and complex ontologies such as ICD-11. Using the International Classification of Traditional Medicine (ICTM) – Chapter 24 of ICD-11 – as a case study, and an expert panel of knowledge engineers, we reveal the kinds of problems that can occur, how they can be detected, and how they can be fixed. Specifically, we found that a logically inconsistent version of the ICTM ontology could be repaired using justifications (minimal entailing subsets of an ontology). Although over 600 justifications for the inconsistency were initially computed, we found that there were three main manageable patterns or categories of justifications involving TBox and ABox axioms. These categories represented meaningful domain errors to an expert panel of ICTM project knowledge engineers, who were able to use them to successfully determine the axioms that needed to be revised in order to fix the problem. All members of the expert panel agreed that the approach was useful for debugging and ensuring the quality of ICTM. PMID:25954373

Efforts to Reduce International Space Station Crew Maintenance for the Management of the Extravehicular Mobility Unit Transport Loop Water Quality

NASA Technical Reports Server (NTRS)

Steele, John W.; Etter, David; Rector, Tony; Boyle, Robert; Vandezande, Christopher

2013-01-01

The EMU (Extravehicular Mobility Unit) contains a semi-closed-loop re-circulating water circuit (Transport Loop) to absorb heat into a LCVG (Liquid Coolant and Ventilation Garment) worn by the astronaut. A second, single-pass water circuit (Feed-water Loop) provides water to a cooling device (Sublimator) containing porous plates, and that water sublimates through the porous plates to space vacuum. The cooling effect from the sublimation of this water translates to a cooling of the LCVG water that circulates through the Sublimator. The quality of the EMU Transport Loop water is maintained through the use of a water processing kit (ALCLR Airlock Cooling Loop Remediation) that is used to periodically clean and disinfect the water circuit. Opportunities to reduce crew time associated with on-orbit ALCLR operations include a detailed review of the historical water quality data for evidence to support an extension to the implementation cycle. Furthermore, an EMU returned after 2-years of use on the ISS (International Space Station) is being used as a test bed to evaluate the results of extended and repeated ALCLR implementation cycles. Finally, design, use and on-orbit location enhancements to the ALCLR kit components are being considered to allow the implementation cycle to occur in parallel with other EMU maintenance and check-out activities, and to extend the life of the ALCLR kit components. These efforts are undertaken to reduce the crew-time and logistics burdens for the EMU, while ensuring the long-term health of the EMU water circuits for a post-Shuttle 6-year service life.

Guidance for laboratories performing molecular pathology for cancer patients.

PubMed

Cree, Ian A; Deans, Zandra; Ligtenberg, Marjolijn J L; Normanno, Nicola; Edsjö, Anders; Rouleau, Etienne; Solé, Francesc; Thunnissen, Erik; Timens, Wim; Schuuring, Ed; Dequeker, Elisabeth; Murray, Samuel; Dietel, Manfred; Groenen, Patricia; Van Krieken, J Han

2014-11-01

Molecular testing is becoming an important part of the diagnosis of any patient with cancer. The challenge to laboratories is to meet this need, using reliable methods and processes to ensure that patients receive a timely and accurate report on which their treatment will be based. The aim of this paper is to provide minimum requirements for the management of molecular pathology laboratories. This general guidance should be augmented by the specific guidance available for different tumour types and tests. Preanalytical considerations are important, and careful consideration of the way in which specimens are obtained and reach the laboratory is necessary. Sample receipt and handling follow standard operating procedures, but some alterations may be necessary if molecular testing is to be performed, for instance to control tissue fixation. DNA and RNA extraction can be standardised and should be checked for quality and quantity of output on a regular basis. The choice of analytical method(s) depends on clinical requirements, desired turnaround time, and expertise available. Internal quality control, regular internal audit of the whole testing process, laboratory accreditation, and continual participation in external quality assessment schemes are prerequisites for delivery of a reliable service. A molecular pathology report should accurately convey the information the clinician needs to treat the patient with sufficient information to allow for correct interpretation of the result. Molecular pathology is developing rapidly, and further detailed evidence-based recommendations are required for many of the topics covered here. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ellefson, S; Department of Human Oncology, University of Wisconsin, Madison, WI; Culberson, W

Purpose: Discrepancies in absolute dose values have been detected between the ViewRay treatment planning system and ArcCHECK readings when performing delivery quality assurance on the ViewRay system with the ArcCHECK-MR diode array (SunNuclear Corporation). In this work, we investigate whether these discrepancies are due to errors in the ViewRay planning and/or delivery system or due to errors in the ArcCHECK’s readings. Methods: Gamma analysis was performed on 19 ViewRay patient plans using the ArcCHECK. Frequency analysis on the dose differences was performed. To investigate whether discrepancies were due to measurement or delivery error, 10 diodes in low-gradient dose regions weremore » chosen to compare with ion chamber measurements in a PMMA phantom with the same size and shape as the ArcCHECK, provided by SunNuclear. The diodes chosen all had significant discrepancies in absolute dose values compared to the ViewRay TPS. Absolute doses to PMMA were compared between the ViewRay TPS calculations, ArcCHECK measurements, and measurements in the PMMA phantom. Results: Three of the 19 patient plans had 3%/3mm gamma passing rates less than 95%, and ten of the 19 plans had 2%/2mm passing rates less than 95%. Frequency analysis implied a non-random error process. Out of the 10 diode locations measured, ion chamber measurements were all within 2.2% error relative to the TPS and had a mean error of 1.2%. ArcCHECK measurements ranged from 4.5% to over 15% error relative to the TPS and had a mean error of 8.0%. Conclusion: The ArcCHECK performs well for quality assurance on the ViewRay under most circumstances. However, under certain conditions the absolute dose readings are significantly higher compared to the planned doses. As the ion chamber measurements consistently agree with the TPS, it can be concluded that the discrepancies are due to ArcCHECK measurement error and not TPS or delivery system error. This work was funded by the Bhudatt Paliwal Professorship and the University of Wisconsin Medical Radiation Research Center.« less

OntoCheck: verifying ontology naming conventions and metadata completeness in Protégé 4.

PubMed

Schober, Daniel; Tudose, Ilinca; Svatek, Vojtech; Boeker, Martin

2012-09-21

Although policy providers have outlined minimal metadata guidelines and naming conventions, ontologies of today still display inter- and intra-ontology heterogeneities in class labelling schemes and metadata completeness. This fact is at least partially due to missing or inappropriate tools. Software support can ease this situation and contribute to overall ontology consistency and quality by helping to enforce such conventions. We provide a plugin for the Protégé Ontology editor to allow for easy checks on compliance towards ontology naming conventions and metadata completeness, as well as curation in case of found violations. In a requirement analysis, derived from a prior standardization approach carried out within the OBO Foundry, we investigate the needed capabilities for software tools to check, curate and maintain class naming conventions. A Protégé tab plugin was implemented accordingly using the Protégé 4.1 libraries. The plugin was tested on six different ontologies. Based on these test results, the plugin could be refined, also by the integration of new functionalities. The new Protégé plugin, OntoCheck, allows for ontology tests to be carried out on OWL ontologies. In particular the OntoCheck plugin helps to clean up an ontology with regard to lexical heterogeneity, i.e. enforcing naming conventions and metadata completeness, meeting most of the requirements outlined for such a tool. Found test violations can be corrected to foster consistency in entity naming and meta-annotation within an artefact. Once specified, check constraints like name patterns can be stored and exchanged for later re-use. Here we describe a first version of the software, illustrate its capabilities and use within running ontology development efforts and briefly outline improvements resulting from its application. Further, we discuss OntoChecks capabilities in the context of related tools and highlight potential future expansions. The OntoCheck plugin facilitates labelling error detection and curation, contributing to lexical quality assurance in OWL ontologies. Ultimately, we hope this Protégé extension will ease ontology alignments as well as lexical post-processing of annotated data and hence can increase overall secondary data usage by humans and computers.

Editorial quality, diffusion and bibliometric indicators of the Revista Espaãnola de Enfermedades Digestivas.

PubMed

López-Cózar, E D; Ruiz-Pérez, R; Jiménez-Contreras, E

1999-01-01

To evaluate the editorial quality, diffusion, relevance of the scientific content, and the publication practices of the specialised journal Revista Española de Enfermedades Digestivas. We checked 136 parameters based on ISO standards, the recommendations of scientific and editorial organisations, and studies of scientific editing and international publishing practices for biomedical journals. Diffusion was calculated using national and international databases, specialised libraries in Spain, and Internet sources. The analysis of the scientific content and publication practices was based on bibliometric indicators for the journal, authorship, and contributions. The sample for this study comprised six alternate issues of volume number 88 (1996), the last issue of this volume, and the first issue of volume 89 (1997). The samples used for the bibliometric analysis varied depending on the characteristics of specific indicators and the availability of information. The overall mean value for compliance with standards was 46.1%, while the real mean was calculated at 72.21%. The editorial procedures at the journal are similar to those of analogous international journals. The Revista Española de Enfermedades Digestivas is included in international databases of biomedical journals, and in the interdisciplinary international database SCI. It was found to be present in 70% of the medical libraries of Spanish universities, and in 73% of the hospital libraries studied. Bibliometric indicators showed co-authorship to be 5.5%; the origin of the authors grouped by province and by type of institutional affiliations showed 27.8% of all authors to be from Madrid, and that more were affiliated with general hospitals than with university hospitals. The mean delay between initial receipt of a manuscript and its publication was 300 days. Cocitation analysis gave the journal a central position amongst the 38 Spanish biomedical journals considered representative of the field. The journal's impact factor for 1996 was 0.260. The Revista Española de Enfermedades Digestivas is a high-quality vehicle of research results, and has acceptable internal editorial procedures. The journal is widely distributed, though its visibility on the Internet should be improved. Co-authorship is similar to that seen in other medical journals. Steps should be taken to make this journal better known within Spain, and to reduce the delay between the initial receipt and the final publication of manuscripts. Its impact factor is increasing steadily.

Recommendations of the DNA Commission of the International Society for Forensic Genetics (ISFG) on quality control of autosomal Short Tandem Repeat allele frequency databasing (STRidER).

PubMed

Bodner, Martin; Bastisch, Ingo; Butler, John M; Fimmers, Rolf; Gill, Peter; Gusmão, Leonor; Morling, Niels; Phillips, Christopher; Prinz, Mechthild; Schneider, Peter M; Parson, Walther

2016-09-01

The statistical evaluation of autosomal Short Tandem Repeat (STR) genotypes is based on allele frequencies. These are empirically determined from sets of randomly selected human samples, compiled into STR databases that have been established in the course of population genetic studies. There is currently no agreed procedure of performing quality control of STR allele frequency databases, and the reliability and accuracy of the data are largely based on the responsibility of the individual contributing research groups. It has been demonstrated with databases of haploid markers (EMPOP for mitochondrial mtDNA, and YHRD for Y-chromosomal loci) that centralized quality control and data curation is essential to minimize error. The concepts employed for quality control involve software-aided likelihood-of-genotype, phylogenetic, and population genetic checks that allow the researchers to compare novel data to established datasets and, thus, maintain the high quality required in forensic genetics. Here, we present STRidER (http://strider.online), a publicly available, centrally curated online allele frequency database and quality control platform for autosomal STRs. STRidER expands on the previously established ENFSI DNA WG STRbASE and applies standard concepts established for haploid and autosomal markers as well as novel tools to reduce error and increase the quality of autosomal STR data. The platform constitutes a significant improvement and innovation for the scientific community, offering autosomal STR data quality control and reliable STR genotype estimates. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

[Comparative analysis of quality labels of health websites].

PubMed

Padilla-Garrido, N; Aguado-Correa, F; Huelva-López, L; Ortega-Moreno, M

2016-01-01

The search for health related information on the Internet is a growing phenomenon, buts its main drawback is the lack of reliability of information consulted. The aim of this study was to analyse and compare existing quality labels of health websites. A cross-sectional study was performed by searching Medline, IBECS, Google, and Yahoo, in both English and Spanish, between 8 and 9 March, 2015. Different keywords were used depending on whether the search was conducted in medical databases or generic search engines. The quality labels were classified according to their origin, analysing their character, year of implementation, the existence of the accreditation process, number of categories, criteria and standards, possibility of self-assessment, number of levels of certification, certification scope, validity, analytical quality of content, fee, results of the accreditation process, application and number of websites granted the seal, and quality labels obtained by the accrediting organisation. Seven quality labels, five of Spanish origin (WMA, PAWS, WIS, SEAFORMEC and M21) and two international ones (HONcode and Health Web Site Accreditation), were analysed. There was disparity in carrying out the accreditation process, with some not detailing key aspects of the process, or providing incomplete, outdated, or even inaccurate information. The most rigorous guaranteed the level of confidence that the websites had in relation to the content of information, but none checked the quality of them. Although rigorous quality labels may become useful, the deficiencies in some of them cast doubt on their current usefulness. Copyright © 2015 SECA. Publicado por Elsevier España, S.L.U. All rights reserved.

Quality indicators for initial licensure and discipline in nursing laws in South Korea and North Carolina.

PubMed

Kim, K K; Kjervik, D K; Foster, B

2014-03-01

The Korean regulatory framework of nursing licensure reflects that of the USA, but its content differs in some of the powers related to quality assurance. This article compares regulatory quality indicators and describes core standards in nursing regulations that are related to both initial licensure and discipline for three groups: the National Council of State Boards of Nursing, the North Carolina and the South of Korea. A descriptive, comparative law design is used to examine the differences and similarities in the quality indicators and core standards found in three documents: the National Council of State Boards of Nursing Model Act, the North Carolina Nursing Practice Act and the Korean Medical Service Act for registered nurses. The findings indicate that ten quality indicators and two standards appear in study objects. Although most of the quality indicators are common to all documents, some differences are found in terms of the scope of criminal background checks and the range of grounds for disciplinary action. These findings cannot be generalized in the USA because although the North Carolina nursing act was selected as an example of US nursing laws, nursing laws differ somewhat across states. This comparative study shows a clear opportunity to develop indicators that acknowledge the important areas of competence and good moral character and how they can improve patient safety in Korea. This study provides recommendations for Korean nursing legislative redesign and pointers for other jurisdictions to consider. © 2013 International Council of Nurses.

SU-F-T-251: The Quality Assurance for the Heavy Patient Load Department in the Developing Country: The Primary Experience of An Entire Workflow QA Process Management in Radiotherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xie, J; Wang, J; Peng, J

Purpose: To implement an entire workflow quality assurance (QA) process in the radiotherapy department and to reduce the error rates of radiotherapy based on the entire workflow management in the developing country. Methods: The entire workflow QA process management starts from patient registration to the end of last treatment including all steps through the entire radiotherapy process. Error rate of chartcheck is used to evaluate the the entire workflow QA process. Two to three qualified senior medical physicists checked the documents before the first treatment fraction of every patient. Random check of the treatment history during treatment was also performed.more » A total of around 6000 patients treatment data before and after implementing the entire workflow QA process were compared from May, 2014 to December, 2015. Results: A systemic checklist was established. It mainly includes patient’s registration, treatment plan QA, information exporting to OIS(Oncology Information System), documents of treatment QAand QA of the treatment history. The error rate derived from the chart check decreases from 1.7% to 0.9% after our the entire workflow QA process. All checked errors before the first treatment fraction were corrected as soon as oncologist re-confirmed them and reinforce staff training was accordingly followed to prevent those errors. Conclusion: The entire workflow QA process improved the safety, quality of radiotherapy in our department and we consider that our QA experience can be applicable for the heavily-loaded radiotherapy departments in developing country.« less

Improved near real-time data management procedures for the Mediterranean ocean Forecasting System-Voluntary Observing Ship program

NASA Astrophysics Data System (ADS)

Manzella, G. M. R.; Scoccimarro, E.; Pinardi, N.; Tonani, M.

2003-01-01

A "ship of opportunity" program was launched as part of the Mediterranean Forecasting System Pilot Project. During the operational period (September 1999 to May 2000), six tracks covered the Mediterranean from the northern to southern boundaries approximately every 15 days, while a long eastwest track from Haifa to Gibraltar was covered approximately every month. XBT data were collected, sub-sampled at 15 inflection points and transmitted through a satellite communication system to a regional data centre. It was found that this data transmission system has limitations in terms of quality of the temperature profiles and quantity of data successfully transmitted. At the end of the MFSPP operational period, a new strategy for data transmission and management was developed. First of all, VOS-XBT data are transmitted with full resolution. Secondly, a new data management system, called Near Real Time Quality Control for XBT (NRT.QC.XBT), was defined to produce a parallel stream of high quality XBT data for further scientific analysis. The procedure includes: (1) Position control; (2) Elimination of spikes; (3) Re-sampling at a 1 metre vertical interval; (4) Filtering; (5) General malfunctioning check; (6) Comparison with climatology (and distance from this in terms of standard deviations); (7) Visual check; and (8) Data consistency check. The first six steps of the new procedure are completely automated; they are also performed using a new climatology developed as part of the project. The visual checks are finally done with a free-market software that allows NRT final data assessment.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hardin, M; Harrison, A; Lockamy, V

Purpose: Desire to improve efficiency and throughput inspired a review of our physics chart check procedures. Departmental policy mandates plan checks pre-treatment, after first treatment and weekly every 3–5 days. This study examined the effectiveness of the “after first” check with respect to improving patient safety and clinical efficiency. Type and frequency of variations discovered during this redundant secondary review was examined over seven months. Methods: A community spreadsheet was created to record variations in care discovered during chart review following the first fraction of treatment and before the second fraction (each plan reviewed prior to treatment). Entries were recordedmore » from August 2014 through February 2015, amounting to 43 recorded variations out of 906 reviewed charts. The variations were divided into categories and frequencies were assessed month-to-month. Results: Analysis of recorded variations indicates an overall variation rate of 4.7%. The initial rate was 13.5%; months 2–7 average 3.7%. The majority of variations related to discrepancies in documentation at 46.5%, followed by prescription, plan deficiency, and dose tracking related variations at 25.5%, 12.8%, and 12.8%, respectively. Minor variations (negligible consequence on patient treatment) outweighed major variations 3 to 1. Conclusion: This work indicates that this redundant secondary check is effective. The first month spike in rates could be due to the Hawthorne/observer effect, but the consistent 4% variation rate suggests the need for periodical re-training on variations noted as frequent to improve awareness and quality of the initial chart review process, which may lead to improved treatment quality, patient safety and increased clinical efficiency. Utilizing these results, a continuous quality improvement process following Deming’s Plan-Do-Study-Act (PDSA) methodology was generated. The first iteration of this PDSA was adding a specific dose tracking checklist item in the pre-treatment plan check assessment; the ramification of which will be assessed in future data.« less

Documenting Models for Interoperability and Reusability ...

EPA Pesticide Factsheets

Many modeling frameworks compartmentalize science via individual models that link sets of small components to create larger modeling workflows. Developing integrated watershed models increasingly requires coupling multidisciplinary, independent models, as well as collaboration between scientific communities, since component-based modeling can integrate models from different disciplines. Integrated Environmental Modeling (IEM) systems focus on transferring information between components by capturing a conceptual site model; establishing local metadata standards for input/output of models and databases; managing data flow between models and throughout the system; facilitating quality control of data exchanges (e.g., checking units, unit conversions, transfers between software languages); warning and error handling; and coordinating sensitivity/uncertainty analyses. Although many computational software systems facilitate communication between, and execution of, components, there are no common approaches, protocols, or standards for turn-key linkages between software systems and models, especially if modifying components is not the intent. Using a standard ontology, this paper reviews how models can be described for discovery, understanding, evaluation, access, and implementation to facilitate interoperability and reusability. In the proceedings of the International Environmental Modelling and Software Society (iEMSs), 8th International Congress on Environmental Mod

Development of Critical Profilometers to Meet Current and Future NASA Composite Overwrapped Pressure Vessel (COPV) Inspection Needs

NASA Technical Reports Server (NTRS)

Saulsberry, Regor; Nichols, Charles

2012-01-01

This project is part of a multi-center effort to develop and validate critical NDE techniques which can be implemented into current and future NASA spacecraft COPV manufacturing processes. After decades of COPV development, manufacturing variance is still high and has necessitated higher safety factors and additional mass to be flown on spacecraft (reducing overall performance). Additionally, the NASA Engineering and Safety Center (NESC) indicated that nondestructive evaluation (NDE) was not adequately implemented during Shuttle and International Space Station (ISS) COPV manufacturing and provisions were not made for on-going structural integrity and health checks during the various spacecraft programs. This project helps to provide additional data needed to help address these issues. This project seeks to develop and install internal and external laser profilometers at COPV manufacturing facilities to provide data needed to improve COPV quality and consistency. This project also investigates other scanning techniques that will enhance the system to more completely meet manufacturing needs, thus transforming the profilometer into what has been termed the "Universal Manufacturing COPV Scanner".

40 CFR Appendix A to Part 58 - Quality Assurance Requirements for SLAMS, SPMs and PSD Air Monitoring

Code of Federal Regulations, 2014 CFR

2014-07-01

... monitor. 3.3.4.4Pb Performance Evaluation Program (PEP) Procedures. Each year, one performance evaluation... Information 2. Quality System Requirements 3. Measurement Quality Check Requirements 4. Calculations for Data... 10 of this appendix) and at a national level in references 1, 2, and 3 of this appendix. 1...

40 CFR Appendix A to Part 58 - Quality Assurance Requirements for SLAMS, SPMs and PSD Air Monitoring

Code of Federal Regulations, 2013 CFR

2013-07-01

... monitor. 3.3.4.4Pb Performance Evaluation Program (PEP) Procedures. Each year, one performance evaluation... Information 2. Quality System Requirements 3. Measurement Quality Check Requirements 4. Calculations for Data... 10 of this appendix) and at a national level in references 1, 2, and 3 of this appendix. 1...

Quantitative assessment of locomotive syndrome by the loco-check questionnaire in older Japanese females

PubMed Central

Noge, Sachiko; Ohishi, Tatsuo; Yoshida, Takuya; Kumagai, Hiromichi

2017-01-01

[Purpose] Locomotive syndrome (LS) is a condition by which older people may require care service because of problems with locomotive organs. This study examined whether the loco-check, a 7-item questionnaire, is useful for quantitatively assessing the severity of LS. [Subjects and Methods] Seventy-one community dwelling Japanese females aged 64–96 years (81.7 ± 8.0 years) participated in this study. The associations of the loco-check with thigh muscle mass measured by X-ray CT, physical performance, nutritional status, and quality of life (QOL) were investigated. [Results] The results showed that the number of times that “yes” was selected in the loco-check was significantly correlated with thigh muscle mass, major measures of physical performance, nutritional status, and QOL. This number was also significantly larger in the participants experiencing falling, fracture, and lumbar pain than in those without these episodes. [Conclusion] These results suggest that the loco-check might be useful for quantitatively evaluating LS. PMID:28932003

Check Calibration of the NASA Glenn 10- by 10-Foot Supersonic Wind Tunnel (2014 Test Entry)

NASA Technical Reports Server (NTRS)

Johnson, Aaron; Pastor-Barsi, Christine; Arrington, E. Allen

2016-01-01

A check calibration of the 10- by 10-Foot Supersonic Wind Tunnel (SWT) was conducted in May/June 2014 using an array of five supersonic wedge probes to verify the 1999 Calibration. This check calibration was necessary following a control systems upgrade and an integrated systems test (IST). This check calibration was required to verify the tunnel flow quality was unchanged by the control systems upgrade prior to the next test customer beginning their test entry. The previous check calibration of the tunnel occurred in 2007, prior to the Mars Science Laboratory test program. Secondary objectives of this test entry included the validation of the new Cobra data acquisition system (DAS) against the current Escort DAS and the creation of statistical process control (SPC) charts through the collection of series of repeated test points at certain predetermined tunnel parameters. The SPC charts secondary objective was not completed due to schedule constraints. It is hoped that this effort will be readdressed and completed in the near future.

STS-104 Crew Training of Jim Reilly in EMU fit check

NASA Image and Video Library

2001-04-09

JSC2001-E-11692 (9 April 2001) --- Astronaut James F. Reilly, mission specialist, prepares to don his helmet for an Extravehicular Mobility Unit (EMU) fit check in one of the chambers in the Crew Systems Laboratory at the Johnson Space Center (JSC). The STS-104 mission to the International Space Station (ISS) represents the Space Shuttle Atlantis' first flight using a new engine and is targeted for a liftoff no earlier than June 14, 2001.

STS-104 Crew Training of Jim Reilly in EMU fit check

NASA Image and Video Library

2001-04-09

JSC2001-E-11699 (9 April 2001) --- Astronaut James F. Reilly, STS-104 mission specialist, participates in an Extravehicular Mobility Unit (EMU) fit check in one of the chambers in the Crew Systems Laboratory at the Johnson Space Center (JSC). The STS-104 mission to the International Space Station (ISS) represents the Space Shuttle Atlantis' first flight using a new engine and is targeted for a liftoff no earlier than June 14, 2001.

STS-104 Crew Training of Jim Reilly in EMU fit check

NASA Image and Video Library

2001-04-09

JSC2001-E-11702 (9 April 2001) --- Astronaut James F. Reilly, STS-104 mission specialist, participates in an Extravehicular Mobility Unit (EMU) fit check in one of the chambers in the Crew Systems Laboratory at the Johnson Space Center (JSC). The STS-104 mission to the International Space Station (ISS) represents the Space Shuttle Atlantis' first flight using a new engine and is targeted for a liftoff no earlier than June 14, 2001.

STS-104 Crew Training of Jim Reilly in EMU fit check

NASA Image and Video Library

2001-04-09

JSC2001-E-11696 (9 April 2001) --- Astronaut James F. Reilly, STS-104 mission specialist, participates in an Extravehicular Mobility Unit (EMU) fit check in one of the chambers in the Crew Systems Laboratory at the Johnson Space Center (JSC). The STS-104 mission to the International Space Station (ISS) represents the Space Shuttle Atlantis' first flight using a new engine and is targeted for a liftoff no earlier than June 14, 2001.

STS-104 Crew Training of Jim Reilly in EMU fit check

NASA Image and Video Library

2001-04-09

JSC2001-E-11697 (9 April 2001) --- Astronaut James F. Reilly, STS-104 mission specialist, participates in an Extravehicular Mobility Unit (EMU) fit check in one of the chambers in the Crew Systems Laboratory at the Johnson Space Center (JSC). The STS-104 mission to the International Space Station (ISS) represents the Space Shuttle Atlantis' first flight using a new engine and is targeted for a liftoff no earlier than June 14, 2001.

STS-104 Crew Training of Jim Reilly in EMU fit check

NASA Image and Video Library

2001-04-09

JSC2001-E-11698 (9 April 2001) --- Astronaut James F. Reilly, STS-104 mission specialist, participates in an Extravehicular Mobility Unit (EMU) fit check in one of the chambers in the Crew Systems Laboratory at the Johnson Space Center (JSC). The STS-104 mission to the International Space Station (ISS) represents the Space Shuttle Atlantis' first flight using a new engine and is targeted for a liftoff no earlier than June 14, 2001.

STS-104 Crew Training of Jim Reilly in EMU fit check

NASA Image and Video Library

2001-04-09

JSC2001-E-11703 (9 April 2001) --- Astronaut James F. Reilly, STS-104 mission specialist, participates in an Extravehicular Mobility Unit (EMU) fit check in one of the chambers in the Crew Systems Laboratory at the Johnson Space Center (JSC). The STS-104 mission to the International Space Station (ISS) represents the Space Shuttle Atlantis' first flight using a new engine and is targeted for a liftoff no earlier than June 14, 2001.

MS Voss checks out his EVA space tools

NASA Image and Video Library

2001-03-09

STS102-E-5032 (9 March 2001) --- On Discovery's mid deck, astronauts James S. Voss and Susan J. Helms (partially visible at right edge), STS-102 mission specialists, check gear associated with a scheduled space walk to perform work on the International Space Station (ISS). At the time this Flight Day 1 digital still camera image was exposed, the Discovery was on a time line to catch the orbital outpost and link with it during Flight Day 2.

Exercise and sports in cardiac patients and athletes at risk: Balance between benefit and harm.

PubMed

Maisch, B

2015-05-01

Physical training has a well-established role in the primary and secondary prevention of coronary artery disease. Moderate exercise has been shown to be beneficial in chronic stable heart failure. Competitive sports, however, is contraindicated in most forms of hypertrophic cardiomyopathy (HCM), in myocarditis, in pericarditis, and in right ventricular cardiomyopathy/dysplasia. In most European countries, the recommendations of medical societies or public bodies state that these diseases have to be ruled out by prescreening before an individual can take up competitive sports. But the intensity and quality of this health check vary considerably from country to country, from the type of sports activity, and from the individuals who want to participate in sports. Prescreening on an individual basis should also be considered for leisure sports, particularly in people who decide to start training in middle age after years of physical inactivity to regain physical fitness. In leisure sports the initiative for a medical check-up lies primarily in the hands of the "healthy" individual. If she or he plans to participate in extreme forms of endurance sports with excessive training periods such as a marathon or ultramarathon and competitive cycling or rowing, they should be aware that high-intensity endurance sports can lead to structural alterations of the heart muscle even in healthy individuals. Physical exercise in patients with heart disease should be accompanied by regular medical check-ups. Most rehabilitation programs in Europe perform physical activity and training schedules according to current guidelines. Little is known about athletes who are physically handicapped and participate in competitive sports or the Paralympics, and even less is known about individuals with intellectual disabilities (ID) who participate in local, regional, international competitions or the Special Olympics or just in leisure sport activities.

Clinical implementation of RNA signatures for pharmacogenomic decision-making

PubMed Central

Tang, Weihua; Hu, Zhiyuan; Muallem, Hind; Gulley, Margaret L

2011-01-01

RNA profiling is increasingly used to predict drug response, dose, or toxicity based on analysis of drug pharmacokinetic or pharmacodynamic pathways. Before implementing multiplexed RNA arrays in clinical practice, validation studies are carried out to demonstrate sufficient evidence of analytic and clinical performance, and to establish an assay protocol with quality assurance measures. Pathologists assure quality by selecting input tissue and by interpreting results in the context of the input tissue as well as the technologies that were used and the clinical setting in which the test was ordered. A strength of RNA profiling is the array-based measurement of tens to thousands of RNAs at once, including redundant tests for critical analytes or pathways to promote confidence in test results. Instrument and reagent manufacturers are crucial for supplying reliable components of the test system. Strategies for quality assurance include careful attention to RNA preservation and quality checks at pertinent steps in the assay protocol, beginning with specimen collection and proceeding through the various phases of transport, processing, storage, analysis, interpretation, and reporting. Specimen quality is checked by probing housekeeping transcripts, while spiked and exogenous controls serve as a check on analytic performance of the test system. Software is required to manipulate abundant array data and present it for interpretation by a laboratory physician who reports results in a manner facilitating therapeutic decision-making. Maintenance of the assay requires periodic documentation of personnel competency and laboratory proficiency. These strategies are shepherding genomic arrays into clinical settings to provide added value to patients and to the larger health care system. PMID:23226056

Software tool for physics chart checks.

PubMed

Li, H Harold; Wu, Yu; Yang, Deshan; Mutic, Sasa

2014-01-01

Physics chart check has long been a central quality assurance (QC) measure in radiation oncology. The purpose of this work is to describe a software tool that aims to accomplish simplification, standardization, automation, and forced functions in the process. Nationally recognized guidelines, including American College of Radiology and American Society for Radiation Oncology guidelines and technical standards, and the American Association of Physicists in Medicine Task Group reports were identified, studied, and summarized. Meanwhile, the reported events related to physics chart check service were analyzed using an event reporting and learning system. A number of shortfalls in the chart check process were identified. To address these problems, a software tool was designed and developed under Microsoft. Net in C# to hardwire as many components as possible at each stage of the process. The software consists of the following 4 independent modules: (1) chart check management; (2) pretreatment and during treatment chart check assistant; (3) posttreatment chart check assistant; and (4) quarterly peer-review management. The users were a large group of physicists in the author's radiation oncology clinic. During over 1 year of use the tool has proven very helpful in chart checking management, communication, documentation, and maintaining consistency. The software tool presented in this work aims to assist physicists at each stage of the physics chart check process. The software tool is potentially useful for any radiation oncology clinics that are either in the process of pursuing or maintaining the American College of Radiology accreditation.

Biochemia Medica has started using the CrossCheck plagiarism detection software powered by iThenticate

PubMed Central

Šupak-Smolčić, Vesna; Šimundić, Ana-Maria

2013-01-01

In February 2013, Biochemia Medica has joined CrossRef, which enabled us to implement CrossCheck plagiarism detection service. Therefore, all manuscript submitted to Biochemia Medica are now first assigned to Research integrity editor (RIE), before sending the manuscript for peer-review. RIE submits the text to CrossCheck analysis and is responsible for reviewing the results of the text similarity analysis. Based on the CrossCheck analysis results, RIE subsequently provides a recommendation to the Editor-in-chief (EIC) on whether the manuscript should be forwarded to peer-review, corrected for suspected parts prior to peer-review or immediately rejected. Final decision on the manuscript is, however, with the EIC. We hope that our new policy and manuscript processing algorithm will help us to further increase the overall quality of our Journal. PMID:23894858

FAO/INFOODS Guidelines for Checking Food Composition Data Prior to the Publication of a User Table/Database, Version 1.0

USDA-ARS?s Scientific Manuscript database

Food composition data play an essential role in many sectors, including nutrition, health, agriculture, environment, food labeling and trade. Over the last 25 years, International Network of Food Data Systems (INFOODS) has developed many international standards, guidelines and tools to obtain harmo...

[The biomedical periodicals of Hungarian editions--historical overview].

PubMed

Berhidi, Anna; Geges, József; Vasas, Lívia

2006-03-12

The majority of Hungarian scientific results are published in international periodicals in foreign languages. Yet the publications in Hungarian scientific periodicals also should not be ignored. This study analyses biomedical periodicals of Hungarian edition from different points of view. Based on different databases a list of titles consisting of 119 items resulted, which contains both the core and the peripheral journals of the biomedical field. These periodicals were analysed empirically, one by one: checking out the titles. 13 of the titles are ceased, among the rest 106 Hungarian scientific journals 10 are published in English language. From the remaining majority of Hungarian language and publishing only a few show up in international databases. Although quarter of the Hungarian biomedical journals meet the requirements, which means they could be represented in international databases, these periodicals are not indexed. 42 biomedical periodicals are available online. Although quarter of these journals come with restricted access. 2/3 of the Hungarian biomedical journals have detailed instructions to authors. These instructions inform the publishing doctors and researchers of the requirements of a biomedical periodical. The increasing number of Hungarian biomedical journals published is welcome news. But it would be important for quality publications which are cited a lot to appear in the Hungarian journals. The more publications are cited, the more journals and authors gain in prestige on home and international level.

A special ionisation chamber for quality control of diagnostic and mammography X ray equipment.

PubMed

Costa, A M; Caldas, L V E

2003-01-01

A quality control program for X ray equipment used for conventional radiography and mammography requires the constancy check of the beam qualities in terms of the half-value layers. In this work, a special double-faced parallel-plate ionisation chamber was developed with inner electrodes of different materials, in a tandem system. Its application will be in quality control programs of diagnostic and mammography X ray equipment for confirmation of half-value layers previously determined by the conventional method. Moreover, the chamber also may be utilised for measurements of air kerma values (and air kerma rates) in X radiation fields used for conventional radiography and mammography. The chamber was studied in relation to the characteristics of saturation, ion collection efficiency, polarity effects, leakage current, and short-term stability. The energy dependence in response of each of the two faces of the chamber was determined over the conventional radiography and mammography X ray ranges (unattenuated beams). The different energy response of the two faces of the chamber allowed the formation of a tandem system useful for the constancy check of beam qualities.

A model to calculate consistent atmospheric emission projections and its application to Spain

NASA Astrophysics Data System (ADS)

Lumbreras, Julio; Borge, Rafael; de Andrés, Juan Manuel; Rodríguez, Encarnación

Global warming and air quality are headline environmental issues of our time and policy must preempt negative international effects with forward-looking strategies. As part of the revision of the European National Emission Ceilings Directive, atmospheric emission projections for European Union countries are being calculated. These projections are useful to drive European air quality analyses and to support wide-scale decision-making. However, when evaluating specific policies and measures at sectoral level, a more detailed approach is needed. This paper presents an original methodology to evaluate emission projections. Emission projections are calculated for each emitting activity that has emissions under three scenarios: without measures (business as usual), with measures (baseline) and with additional measures (target). The methodology developed allows the estimation of highly disaggregated multi-pollutant, consistent emissions for a whole country or region. In order to assure consistency with past emissions included in atmospheric emission inventories and coherence among the individual activities, the consistent emission projection (CEP) model incorporates harmonization and integration criteria as well as quality assurance/quality check (QA/QC) procedures. This study includes a sensitivity analysis as a first approach to uncertainty evaluation. The aim of the model presented in this contribution is to support decision-making process through the assessment of future emission scenarios taking into account the effect of different detailed technical and non-technical measures and it may also constitute the basis for air quality modelling. The system is designed to produce the information and formats related to international reporting requirements and it allows performing a comparison of national results with lower resolution models such as RAINS/GAINS. The methodology has been successfully applied and tested to evaluate Spanish emission projections up to 2020 for 26 pollutants but the methodology could be adopted for any particular region for different purposes, especially for European countries.

Validation of the Kohnen Restless Legs Syndrome-Quality of Life instrument.

PubMed

Kohnen, Ralf; Martinez-Martin, Pablo; Benes, Heike; Trenkwalder, Claudia; Högl, Birgit; Dunkl, Elmar; Walters, Arthur S

2016-08-01

Due to the symptoms and the sleep disturbances it causes, Restless Legs Syndrome (RLS) has a negative impact on quality of life. Measurement of such impact can be performed by means of questionnaires, such as the Kohnen Restless Legs Syndrome-Quality of Life questionnaire (KRLS-QoL), a specific 12-item instrument that is self-applied by patients. The present study is aimed at performing a first formal validation study of this instrument. Eight hundred ninety-one patients were included for analysis. RLS severity was assessed by the International Restless Legs Scale (IRLS), Restless Legs Syndrome-6 scales (RLS-6), and Clinical Global Impression of Severity. In addition the Epworth Sleepiness Scale (ESS) was assessed. Acceptability, dimensionality, scaling assumptions, reliability, precision, hypotheses-related validity, and responsiveness were tested. There were missing data in 3.58% patients. Floor and ceiling effects were low for the subscales, global evaluation, and summary index derived from items 1 to 11 after checking that scaling assumptions were met. Exploratory parallel factor analysis showed that the KRLS-QoL may be deemed unidimensional, ie, that all components of the scale are part of one overall general quality of life factor. Indexes of internal consistency (alpha = 0.88), item-total correlation (r S  = 0.32-0.71), item homogeneity coefficient (0.41), and scale stability (ICC = 0.73) demonstrated a satisfactory reliability of the KRLS-QoL. Moderate or high correlations were obtained between KRLS-QoL scores and the IRLS, some components of the RLS-6, inter-KRLS-QoL domains, and global evaluations. Known-groups validity for severity levels grouping and responsiveness analysis results were satisfactory, the latter showing higher magnitudes of response for treated than for placebo arms. The KRLS-QoL was proven an acceptable, reliable, valid, and responsive measure to assess the impact of the RLS on quality of life. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

Improving treatment plan evaluation with automation.

PubMed

Covington, Elizabeth L; Chen, Xiaoping; Younge, Kelly C; Lee, Choonik; Matuszak, Martha M; Kessler, Marc L; Keranen, Wayne; Acosta, Eduardo; Dougherty, Ashley M; Filpansick, Stephanie E; Moran, Jean M

2016-11-08

The goal of this work is to evaluate the effectiveness of Plan-Checker Tool (PCT) which was created to improve first-time plan quality, reduce patient delays, increase the efficiency of our electronic workflow, and standardize and automate the phys-ics plan review in the treatment planning system (TPS). PCT uses an application programming interface to check and compare data from the TPS and treatment management system (TMS). PCT includes a comprehensive checklist of automated and manual checks that are documented when performed by the user as part of a plan readiness check for treatment. Prior to and during PCT development, errors identified during the physics review and causes of patient treatment start delays were tracked to prioritize which checks should be automated. Nineteen of 33checklist items were automated, with data extracted with PCT. There was a 60% reduction in the number of patient delays in the six months after PCT release. PCT was suc-cessfully implemented for use on all external beam treatment plans in our clinic. While the number of errors found during the physics check did not decrease, automation of checks increased visibility of errors during the physics check, which led to decreased patient delays. The methods used here can be applied to any TMS and TPS that allows queries of the database. © 2016 The Authors.

Evaluation of Dosimetry Check software for IMRT patient-specific quality assurance.

PubMed

Narayanasamy, Ganesh; Zalman, Travis; Ha, Chul S; Papanikolaou, Niko; Stathakis, Sotirios

2015-05-08

The purpose of this study is to evaluate the use of the Dosimetry Check system for patient-specific IMRT QA. Typical QA methods measure the dose in an array dosimeter surrounded by homogenous medium for which the treatment plan has been recomputed. With the Dosimetry Check system, fluence measurements acquired on a portal dosimeter is applied to the patient's CT scans. Instead of making dose comparisons in a plane, Dosimetry Check system produces isodose lines and dose-volume histograms based on the planning CT images. By exporting the dose distribution from the treatment planning system into the Dosimetry Check system, one is able to make a direct comparison between the calculated dose and the planned dose. The versatility of the software is evaluated with respect to the two IMRT techniques - step and shoot and volumetric arc therapy. The system analyzed measurements made using EPID, PTW seven29, and IBA MatriXX, and an intercomparison study was performed. Plans from patients previously treated at our institution with treated anatomical site on brain, head & neck, liver, lung, and prostate were analyzed using Dosimetry Check system for any anatomical site dependence. We have recommendations and possible precautions that may be necessary to ensure proper QA with the Dosimetry Check system.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ford, Eric C., E-mail: eford@uw.edu; Terezakis, Stephanie; Souranis, Annette

Purpose: To quantify the error-detection effectiveness of commonly used quality control (QC) measures. Methods: We analyzed incidents from 2007-2010 logged into a voluntary in-house, electronic incident learning systems at 2 academic radiation oncology clinics. None of the incidents resulted in patient harm. Each incident was graded for potential severity using the French Nuclear Safety Authority scoring scale; high potential severity incidents (score >3) were considered, along with a subset of 30 randomly chosen low severity incidents. Each report was evaluated to identify which of 15 common QC checks could have detected it. The effectiveness was calculated, defined as the percentagemore » of incidents that each QC measure could detect, both for individual QC checks and for combinations of checks. Results: In total, 4407 incidents were reported, 292 of which had high-potential severity. High- and low-severity incidents were detectable by 4.0 {+-} 2.3 (mean {+-} SD) and 2.6 {+-} 1.4 QC checks, respectively (P<.001). All individual checks were less than 50% sensitive with the exception of pretreatment plan review by a physicist (63%). An effectiveness of 97% was achieved with 7 checks used in combination and was not further improved with more checks. The combination of checks with the highest effectiveness includes physics plan review, physician plan review, Electronic Portal Imaging Device-based in vivo portal dosimetry, radiation therapist timeout, weekly physics chart check, the use of checklists, port films, and source-to-skin distance checks. Some commonly used QC checks such as pretreatment intensity modulated radiation therapy QA do not substantially add to the ability to detect errors in these data. Conclusions: The effectiveness of QC measures in radiation oncology depends sensitively on which checks are used and in which combinations. A small percentage of errors cannot be detected by any of the standard formal QC checks currently in broad use, suggesting that further improvements are needed. These data require confirmation with a broader incident-reporting database.« less

Improving Software Quality and Management Through Use of Service Level Agreements

DTIC Science & Technology

2005-03-01

many who believe that the quality of the development process is the best predictor of software product quality. ( Fenton ) Repeatable software processes...reduced errors per KLOC for small projects ( Fenton ), and the quality management metric (QMM) (Machniak, Osmundson). There are also numerous IEEE 14...attention to cosmetic user interface issues and any problems that may arise with the prototype. (Sawyer) The validation process is also another check

The Dental Neglect Scale in adolescents.

PubMed

Coolidge, Trilby; Heima, Masahiro; Johnson, Elissa K; Weinstein, Philip

2009-01-05

Dental neglect has been found to be related to poor oral health, a tendency not to have had routine check-ups, and a longer period of time since the last dental appointment in samples of children and adults. The Dental Neglect Scale (DNS) has been found to be a valid measure of dental neglect in samples of children and adults, and may be valid for adolescents as well. We administered the DNS to a sample of adolescents and report on the relationships between the DNS and oral health status, whether or not the adolescent has been to the dentist recently for routine check-ups, and whether or not the adolescent currently goes to a dentist. We also report the internal and test-retest reliabilities of the DNS in this sample, as well as the results of an exploratory factor analysis. One hundred seventeen adolescents from seven youth groups in the Seattle-Tacoma metropolitan area (Washington State, U.S.) completed the DNS and indicated whether they currently go to a dentist, while parents indicated whether the adolescent had a check-up in the previous three years. Adolescents also received a dental screening. Sixty six adolescents completed the questionnaire twice. T-tests were used to compare DNS scores of adolescents who have visible caries or not, adolescents who have had a check-up in the past three years or not, and adolescents who currently go to a dentist or not. Internal reliability was measured by Cronbach's alpha, and test-rest reliability was measured by intra-class correlation. Factor analysis (Varimax rotation) was used to examine the factor structure. In each comparison, significantly higher DNS scores were observed in adolescents with visible caries, who have not had a check-up in the past three years, or who do not go to a dentist (all p values < 0.05). The test-retest reliability of the DNS was high (ICC = 0.81), and its internal reliability was acceptable (Cronbach's alpha = 0.60). Factor analysis yielded two factors, characterized by home care and visiting a dentist. The DNS appears to operate similarly in this sample of adolescents as it has in other samples of children and adults.

Instrument translation and initial psychometric evaluation of the Danish Body Image Quality of Life Inventory.

PubMed

Rasmussen, Trine Bernholdt; Berg, Selina Kikkenborg; Dixon, Jane; Moons, Philip; Konradsen, Hanne

2016-12-01

Negative body perception has been reported in a number of patient populations. No instrument in Danish for measuring body image-related concerns has been available. Without such an instrument, understanding of the phenomenon in Danish-speaking populations is limited. The purpose of the study was thus to translate and validate a Danish version of the Body Image Quality of Life Inventory (BIQLI), in order to obtain a valid instrument applicable for healthcare research. The study consisted of two phases: (i) instrument adaptation, including forward and back translation, expert committee comparisons and cognitive interviewing, and (ii) empirical testing of the Danish version (BIQLI-DA) with subsequent psychometric evaluation. Hypothesised correlations to other measures, including body mass index (BMI), Medical Outcome Short Form-8 (SF-8), Patient Health Questionnaire-9 (PHQ-9), General Anxiety Disorder-7 and Symptom Check List-90-Revised (SCL-90-R ® ) were tested. In addition, exploratory factor structure analysis (EFA) and internal consistency on item and scale level were performed. The adapted instrument was found to be semantically sound, yet concerns about face validity did arise through cognitive interviews. Danish college students (n = 189, 65 men, M age = 21.1 years) participated in the piloting of the BIQLI-DA. Convergent construct validity was demonstrated through associations to related constructs. Exploratory factor analysis revealed a potential subscale structure. Finally, results showed a high internal consistency (Cronbach's alpha = 0.92). Support for the validity of the BIQLI-DA might have been strengthened by repeating cognitive interviews after layout alterations, by piloting the instrument on a larger sample. This study demonstrated tentative support for the validity of the Danish Body Image Quality of Life (BIQLI-DA) and found the measure to be reliable in terms of internal consistency. Further exploration of response processes and construct validity is needed. © 2016 Nordic College of Caring Science.

Quality assurance of the international computerised 24 h dietary recall method (EPIC-Soft).

PubMed

Crispim, Sandra P; Nicolas, Genevieve; Casagrande, Corinne; Knaze, Viktoria; Illner, Anne-Kathrin; Huybrechts, Inge; Slimani, Nadia

2014-02-01

The interview-administered 24 h dietary recall (24-HDR) EPIC-Soft® has a series of controls to guarantee the quality of dietary data across countries. These comprise all steps that are part of fieldwork preparation, data collection and data management; however, a complete characterisation of these quality controls is still lacking. The present paper describes in detail the quality controls applied in EPIC-Soft, which are, to a large extent, built on the basis of the EPIC-Soft error model and are present in three phases: (1) before, (2) during and (3) after the 24-HDR interviews. Quality controls for consistency and harmonisation are implemented before the interviews while preparing the seventy databases constituting an EPIC-Soft version (e.g. pre-defined and coded foods and recipes). During the interviews, EPIC-Soft uses a cognitive approach by helping the respondent to recall the dietary intake information in a stepwise manner and includes controls for consistency (e.g. probing questions) as well as for completeness of the collected data (e.g. system calculation for some unknown amounts). After the interviews, a series of controls can be applied by dietitians and data managers to further guarantee data quality. For example, the interview-specific 'note files' that were created to track any problems or missing information during the interviews can be checked to clarify the information initially provided. Overall, the quality controls employed in the EPIC-Soft methodology are not always perceivable, but prove to be of assistance for its overall standardisation and possibly for the accuracy of the collected data.

A System Approach to Navy Medical Education and Training. Appendix 22. Otolaryngology Technician.

DTIC Science & Technology

1974-08-31

PROCEDURES TO PATIENT 12 PEXPLAIN LUMBAR PUNCTURE PROCEDURES TO PATIENT 13 IMEASURE/WEIGH PATIENT OR PERSONNEL 14 ICHECK CENTRAL VENOUS PRESSURE 15 TAKE...BLOOD PRESSURE 16 [CHECK RADIAL AWRIST) PULSE 17 ICHECK FEMORAL PULSE FOR PRESENCE AND QUALITY 8 IDETERMINE APICAL PULSE RATE/RHYTHM WITH STETHESCOPE 19... ICHECK PATIENTS TEMPERATURE 2U ICHECK /COUNT RESPIRATIONS 21 IPERFORM CIRCULATION CHECK, E.G. COLOR, PULSE, TEMPERATURE OF ISKIN, CAPILLARY RETURN 22

MoniQA: a general approach to monitor quality assurance

NASA Astrophysics Data System (ADS)

Jacobs, J.; Deprez, T.; Marchal, G.; Bosmans, H.

2006-03-01

MoniQA ("Monitor Quality Assurance") is a new, non-commercial, independent quality assurance software application developed in our medical physics team. It is a complete Java TM - based modular environment for the evaluation of radiological viewing devices and it thus fits in the global quality assurance network of our (film less) radiology department. The purpose of the software tool is to guide the medical physicist through an acceptance protocol and the radiologist through a constancy check protocol by presentation of the necessary test patterns and by automated data collection. Data are then sent to a central management system for further analysis. At the moment more than 55 patterns have been implemented, which can be grouped in schemes to implement protocols (i.e. AAPMtg18, DIN and EUREF). Some test patterns are dynamically created and 'drawn' on the viewing device with random parameters as is the case in a recently proposed new pattern for constancy testing. The software is installed on 35 diagnostic stations (70 monitors) in a film less radiology department. Learning time was very limited. A constancy check -with the new pattern that assesses luminance decrease, resolution problems and geometric distortion- takes only 2 minutes and 28 seconds per monitor. The modular approach of the software allows the evaluation of new or emerging test patterns. We will report on the software and its usability: practicality of the constancy check tests in our hospital and on the results from acceptance tests of viewing stations for digital mammography.

Delivery quality assurance with ArcCHECK

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neilson, Christopher; Klein, Michael; Barnett, Rob

2013-04-01

Radiation therapy requires delivery quality assurance (DQA) to ensure that treatment is accurate and closely follows the plan. We report our experience with the ArcCHECK phantom and investigate its potential optimization for the DQA process. One-hundred seventy DQA plans from 84 patients were studied. Plans were classified into 2 groups: those with the target situated on the diodes of the ArcCHECK (D plans) and those with the target situated at the center (C plans). Gamma pass rates for 8 target sites were examined. The parameters used to analyze the data included 3%/3 mm with the Van Dyk percent difference criteriamore » (VD) on, 3%/3 mm with the VD off, 2%/2 mm with the VD on, and x/3 mm with the VD on and the percentage dosimetric agreement “x” for diode plans adjusted. D plans typically displayed maximum planned dose (MPD) on the cylindrical surface containing ArcCHECK diodes than center plans, resulting in inflated gamma pass rates. When this was taken into account by adjusting the percentage dosimetric agreement, C plans outperformed D plans by an average of 3.5%. ArcCHECK can streamline the DQA process, consuming less time and resources than radiographic films. It is unnecessary to generate 2 DQA plans for each patient; a single center plan will suffice. Six of 8 target sites consistently displayed pass rates well within our acceptance criteria; the lesser performance of head and neck and spinal sites can be attributed to marginally lower doses and increased high gradient of plans.« less

Belgian health-related data in three international databases

PubMed Central

2011-01-01

Aims of the study This study wants to examine the availability of Belgian healthcare data in the three main international health databases: the World Health Organization European Health for All Database (WHO-HFA), the Organisation for Economic Co-operation and Development Health Data 2009 and EUROSTAT. Methods For the indicators present in the three databases, the availability of Belgian data and the source of these data were checked. Main findings The most important problem concerning the availability of Belgian health-related data in the three major international databases is the lack of recent data. Recent data are available for 27% of the indicators of the WHO-HFA database, 73% of the OECD Health Data, and for half of the Eurostat indicators. Especially recent data about health status (including mortality-based indicators) are lacking. Discussion Only the availability of the health-related data is studied in this article. The quality of the Belgian data is however also important to examine. The main problem concerning the availability of health data is the timeliness. One of the causes of this lack of (especially mortality) data is the reform of the Belgian State. Nowadays mortality data are provided by the communities. This results in a delay in the delivery of national mortality data. However several efforts are made to catch up. PMID:22958554

14 CFR 171.207 - Performance requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

....” (Annex 10 to the Convention on International Civil Aviation) except those portions that pertain to... electronic engineering practices for the desired service. The facility must be checked periodically during...

14 CFR 171.207 - Performance requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

....” (Annex 10 to the Convention on International Civil Aviation) except those portions that pertain to... electronic engineering practices for the desired service. The facility must be checked periodically during...

KSC-00padig103

NASA Image and Video Library

2000-11-28

STS-97 Mission Specialist Joseph Tanner gets help with his boots from suit technician Erin Canlon during check pre-pack and fit check. Mission STS-97 is the sixth construction flight to the International Space Station. Its payload includes the P6 Integrated Truss Structure and a photovoltaic (PV) module, with giant solar arrays that will provide power to the Station. The mission includes two spacewalks to complete the solar array connections. STS-97 is scheduled to launch Nov. 30 at about 10:06 p.m. EST

KSC-03pd0011

NASA Image and Video Library

2003-01-04

KENNEDY SPACE CENTER, FLA. - STS-114 Commander Eileen Collins (foreground) checks out the windshield in Atlantis. She and other crew members are at KSC to take part in Crew Equipment Interface Test activities, which include checking out the payload and orbiter. STS-114 is a utilization and logistics flight (ULF-1) that will carry Multi-Purpose Logistics Module Raffaello and the External Stowage Platform (ESP-2), as well as the Expedition 7 crew, to the International Space Station. Launch is targeted for March 1, 2003.

Expedition Seven Lu with EMU in Quest airlock

NASA Image and Video Library

2003-09-05

ISS007-E-14470 (5 September 2003) --- Astronaut Edward T. Lu, Expedition 7 NASA ISS science officer and flight engineer, performs routine maintenance on an Extravehicular Mobility Unit (EMU) space suit in the Quest airlock on the International Space Station (ISS). The work represents a mid-term checkout and included emptying and refilling the suit’s water tank and loops, cycling relief valves, checking sensors and collecting data, a leak check and running the suit’s fan for two hours to lubricate it.

Expedition Seven Lu with EMU in Quest airlock

NASA Image and Video Library

2003-09-05

ISS007-E-14473 (5 September 2003) --- Astronaut Edward T. Lu, Expedition 7 NASA ISS science officer and flight engineer, performs routine maintenance on an Extravehicular Mobility Unit (EMU) space suit in the Quest airlock on the International Space Station (ISS). The work represents a mid-term checkout and included emptying and refilling the suit’s water tank and loops, cycling relief valves, checking sensors and collecting data, a leak check and running the suit’s fan for two hours to lubricate it.

Expedition Seven Lu with EMU in Quest airlock

NASA Image and Video Library

2003-09-05

ISS007-E-14469 (5 September 2003) --- Astronaut Edward T. Lu, Expedition 7 NASA ISS science officer and flight engineer, performs routine maintenance on an Extravehicular Mobility Unit (EMU) space suit in the Quest airlock on the International Space Station (ISS). The work represents a mid-term checkout and included emptying and refilling the suit’s water tank and loops, cycling relief valves, checking sensors and collecting data, a leak check and running the suit’s fan for two hours to lubricate it.

Expedition Seven Lu with EMU in Quest airlock

NASA Image and Video Library

2003-09-05

ISS007-E-14472 (5 September 2003) --- Astronaut Edward T. Lu, Expedition 7 NASA ISS science officer and flight engineer, performs routine maintenance on an Extravehicular Mobility Unit (EMU) space suit in the Quest airlock on the International Space Station (ISS). The work represents a mid-term checkout and included emptying and refilling the suit’s water tank and loops, cycling relief valves, checking sensors and collecting data, a leak check and running the suit’s fan for two hours to lubricate it.

STS-104 Crew Training of Jim Reilly in EMU fit check

NASA Image and Video Library

2001-04-09

JSC2001-E-11690 (9 April 2001) --- Astronaut James F. Reilly, STS-104 mission specialist, prepares to don his helmet for an Extravehicular Mobility Unit (EMU) fit check in one of the chambers in the Crew Systems Laboratory at the Johnson Space Center (JSC). The STS-104 mission to the International Space Station (ISS) represents the Space Shuttle Atlantis' first flight using a new engine and is targeted for a liftoff no earlier than June 14, 2001.

STS-104 Crew Training of Jim Reilly in EMU fit check

NASA Image and Video Library

2001-04-09

JSC2001-E-11691 (9 April 2001) --- Astronaut James F. Reilly, STS-104 mission specialist, prepares to don his helmet for an Extravehicular Mobility Unit (EMU) fit check in one of the chambers in the Crew Systems Laboratory at the Johnson Space Center (JSC). The STS-104 mission to the International Space Station (ISS) represents the Space Shuttle Atlantis' first flight using a new engine and is targeted for a liftoff no earlier than June 14, 2001.

SSC Geopositional Assessment of the Advanced Wide Field Sensor

NASA Technical Reports Server (NTRS)

Ross, Kenton

2007-01-01

The objective is to provide independent verification of IRS geopositional accuracy claims and of the internal geopositional characterization provided by Lutes (2005). Six sub-scenes (quads) were assessed; Three from each AWiFS camera. Check points were manually matched to digital orthophoto quarter quadrangle (DOQQ) reference (assumed accuracy approx. 5 m, RMSE) Check points were selected to meet or exceed Federal Geographic Data Committee's guidelines. Used ESRI ArcGIS for data collection and SSC-written MATLAB scripts for data analysis.

Study rationale and design of OPTIMISE, a randomised controlled trial on the effect of benchmarking on quality of care in type 2 diabetes mellitus.

PubMed

Nobels, Frank; Debacker, Noëmi; Brotons, Carlos; Elisaf, Moses; Hermans, Michel P; Michel, Georges; Muls, Erik

2011-09-22

To investigate the effect of physician- and patient-specific feedback with benchmarking on the quality of care in adults with type 2 diabetes mellitus (T2DM). Study centres in six European countries were randomised to either a benchmarking or control group. Physicians in both groups received feedback on modifiable outcome indicators (glycated haemoglobin [HbA1c], glycaemia, total cholesterol, high density lipoprotein-cholesterol, low density lipoprotein [LDL]-cholesterol and triglycerides) for each patient at 0, 4, 8 and 12 months, based on the four times yearly control visits recommended by international guidelines. The benchmarking group also received comparative results on three critical quality indicators of vascular risk (HbA1c, LDL-cholesterol and systolic blood pressure [SBP]), checked against the results of their colleagues from the same country, and versus pre-set targets. After 12 months of follow up, the percentage of patients achieving the pre-determined targets for the three critical quality indicators will be assessed in the two groups. Recruitment was completed in December 2008 with 3994 evaluable patients. This paper discusses the study rationale and design of OPTIMISE, a randomised controlled study, that will help assess whether benchmarking is a useful clinical tool for improving outcomes in T2DM in primary care. NCT00681850.

Study rationale and design of OPTIMISE, a randomised controlled trial on the effect of benchmarking on quality of care in type 2 diabetes mellitus

PubMed Central

2011-01-01

Background To investigate the effect of physician- and patient-specific feedback with benchmarking on the quality of care in adults with type 2 diabetes mellitus (T2DM). Methods Study centres in six European countries were randomised to either a benchmarking or control group. Physicians in both groups received feedback on modifiable outcome indicators (glycated haemoglobin [HbA1c], glycaemia, total cholesterol, high density lipoprotein-cholesterol, low density lipoprotein [LDL]-cholesterol and triglycerides) for each patient at 0, 4, 8 and 12 months, based on the four times yearly control visits recommended by international guidelines. The benchmarking group also received comparative results on three critical quality indicators of vascular risk (HbA1c, LDL-cholesterol and systolic blood pressure [SBP]), checked against the results of their colleagues from the same country, and versus pre-set targets. After 12 months of follow up, the percentage of patients achieving the pre-determined targets for the three critical quality indicators will be assessed in the two groups. Results Recruitment was completed in December 2008 with 3994 evaluable patients. Conclusions This paper discusses the study rationale and design of OPTIMISE, a randomised controlled study, that will help assess whether benchmarking is a useful clinical tool for improving outcomes in T2DM in primary care. Trial registration NCT00681850 PMID:21939502

[Further development and validation of a clinical auditing procedure for rehabilitation facilities].

PubMed

Meixner, K; Lubenow, B; Brückner, U; Gerdes, N

2006-06-01

Visitations (audits) are considered an instrument of external quality assurance by which the structural and organizational set-up of health facilities can be assessed on site by external experts. The Deutsche Rentenversicherung Bund (including the former Bundesversicherungsanstalt für Angestellte, BfA, the statutory pension insurance agency for white collar employees) is the largest body responsible for rehabilitation in Germany, and it regularly carries out visitations in the approximately 650 rehab centres it sends its patients to. The project presented in this article aimed at developing a manual with detailed descriptions of the procedures and criteria of the assessment, as well as at checking the inter-rater-reliability of the assessment. The manual was developed in cooperation with experts of the Deutsche Rentenversicherung Bund. It contains a description of the areas to be assessed during a visitation as well as leading questions and criteria for the evaluation of single features. The manual was examined in "test visitations" in 10 centres, each of which was visited by three visitation teams (1 medical and 1 administrative expert) simultaneously. When the resulting 30 assessments were compared, the criterion "overall quality of the centre" (which was assessed on a 10-point scale) showed precise agreement in 47 %, and a deviation by 1 point in 33 % of the cases. Single features assessed on a three-point scale (no improvement needed/improvement recommended/immediate improvement obligatory) resulted in precise agreement in between 80 % ("medical and therapeutic processes") and 86 % ("structural features") of the cases. Two-point scales (condition fulfilled or not fulfilled) showed an agreement between 89 % ("internal quality management") and 97 % ("single structural features"). In order to maintain and further develop this good inter-rater-reliability, the visitors of Deutsche Rentenversicherung Bund are continually trained in applying the visitation manual. In addition to transferring knowledge, these internal training courses are aimed at exchanging views and experience in order to enhance consensus among the visitors. This approach of Deutsche Rentenversicherung Bund could be regarded as "internal quality assurance" of its visitation procedure.

Health Check Tools

MedlinePlus

... Breastfeeding Daily Food Plan for Moms (Department of Agriculture) C Calcium Calcium Calculator (International Osteoporosis Foundation) Cancer ... Center) Child Nutrition Food-A-Pedia (Department of Agriculture) Childhood Immunization Instant Childhood Immunization Schedule (Centers for ...

CMM Interim Check (U)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Montano, Joshua Daniel

2015-03-23

Coordinate Measuring Machines (CMM) are widely used in industry, throughout the Nuclear Weapons Complex and at Los Alamos National Laboratory (LANL) to verify part conformance to design definition. Calibration cycles for CMMs at LANL are predominantly one year in length. Unfortunately, several nonconformance reports have been generated to document the discovery of a certified machine found out of tolerance during a calibration closeout. In an effort to reduce risk to product quality two solutions were proposed – shorten the calibration cycle which could be costly, or perform an interim check to monitor the machine’s performance between cycles. The CMM interimmore » check discussed makes use of Renishaw’s Machine Checking Gauge. This off-the-shelf product simulates a large sphere within a CMM’s measurement volume and allows for error estimation. Data was gathered, analyzed, and simulated from seven machines in seventeen different configurations to create statistical process control run charts for on-the-floor monitoring.« less

A source-channel coding approach to digital image protection and self-recovery.

PubMed

Sarreshtedari, Saeed; Akhaee, Mohammad Ali

2015-07-01

Watermarking algorithms have been widely applied to the field of image forensics recently. One of these very forensic applications is the protection of images against tampering. For this purpose, we need to design a watermarking algorithm fulfilling two purposes in case of image tampering: 1) detecting the tampered area of the received image and 2) recovering the lost information in the tampered zones. State-of-the-art techniques accomplish these tasks using watermarks consisting of check bits and reference bits. Check bits are used for tampering detection, whereas reference bits carry information about the whole image. The problem of recovering the lost reference bits still stands. This paper is aimed at showing that having the tampering location known, image tampering can be modeled and dealt with as an erasure error. Therefore, an appropriate design of channel code can protect the reference bits against tampering. In the present proposed method, the total watermark bit-budget is dedicated to three groups: 1) source encoder output bits; 2) channel code parity bits; and 3) check bits. In watermark embedding phase, the original image is source coded and the output bit stream is protected using appropriate channel encoder. For image recovery, erasure locations detected by check bits help channel erasure decoder to retrieve the original source encoded image. Experimental results show that our proposed scheme significantly outperforms recent techniques in terms of image quality for both watermarked and recovered image. The watermarked image quality gain is achieved through spending less bit-budget on watermark, while image recovery quality is considerably improved as a consequence of consistent performance of designed source and channel codes.

46 CFR 160.133-9 - Preapproval review.

Code of Federal Regulations, 2012 CFR

2012-10-01

... manual as described in §§ 160.133-19 and 160.133-21 of this subpart; (7) A description of the quality... suppliers; (ii) The method for controlling the inventory of materials; (iii) The method for checking quality of fabrication and joints, including welding inspection procedures; and (iv) The inspection...

46 CFR 160.133-9 - Preapproval review.

Code of Federal Regulations, 2013 CFR

2013-10-01

... manual as described in §§ 160.133-19 and 160.133-21 of this subpart; (7) A description of the quality... suppliers; (ii) The method for controlling the inventory of materials; (iii) The method for checking quality of fabrication and joints, including welding inspection procedures; and (iv) The inspection...

46 CFR 160.170-9 - Preapproval review.

Code of Federal Regulations, 2014 CFR

2014-10-01

... manual as described in §§ 160.170-19 and 160.170-21 of this subpart; (7) A description of the quality... suppliers; (ii) The method for controlling the inventory of materials; (iii) The method for checking quality of fabrication and joints, including welding inspection procedures; and (iv) The inspection...

46 CFR 160.170-9 - Preapproval review.

Code of Federal Regulations, 2013 CFR

2013-10-01

... manual as described in §§ 160.170-19 and 160.170-21 of this subpart; (7) A description of the quality... suppliers; (ii) The method for controlling the inventory of materials; (iii) The method for checking quality of fabrication and joints, including welding inspection procedures; and (iv) The inspection...

46 CFR 160.133-9 - Preapproval review.

Code of Federal Regulations, 2014 CFR

2014-10-01

... manual as described in §§ 160.133-19 and 160.133-21 of this subpart; (7) A description of the quality... suppliers; (ii) The method for controlling the inventory of materials; (iii) The method for checking quality of fabrication and joints, including welding inspection procedures; and (iv) The inspection...

46 CFR 160.170-9 - Preapproval review.

Code of Federal Regulations, 2012 CFR

2012-10-01

... manual as described in §§ 160.170-19 and 160.170-21 of this subpart; (7) A description of the quality... suppliers; (ii) The method for controlling the inventory of materials; (iii) The method for checking quality of fabrication and joints, including welding inspection procedures; and (iv) The inspection...

HISTORICAL EMISSION AND OZONE TRENDS IN THE HOUSTON AREA

EPA Science Inventory

An analysis of historical trend data for emissions and air quality in Houston for period of 1974-78 is conducted for the purposes of checking the EKMA O3-predicting model and of exploring empirical relations between emission changes and O3 air quality in the Houston area. Results...

14 CFR 141.83 - Quality of training.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Quality of training. 141.83 Section 141.83 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SCHOOLS AND... the FAA to administer any knowledge test, practical test, stage check, or end-of-course test to its...

14 CFR 141.83 - Quality of training.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Quality of training. 141.83 Section 141.83 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) SCHOOLS AND... the FAA to administer any knowledge test, practical test, stage check, or end-of-course test to its...

Objectivity of the Subjective Quality: Convergence on Competencies Expected of Doctoral Graduates

ERIC Educational Resources Information Center

Kariyana, Israel; Sonn, Reynold A.; Marongwe, Newlin

2017-01-01

This study assessed the competencies expected of doctoral graduates. Twelve purposefully sampled education experts provided the data. A case study design within a qualitative approach was adopted. Data were gathered through interviews and thematically analysed. Member checking ensured data trustworthiness. Factors affecting the quality of a…

Hard Spring Wheat Technical Committee 2016 Crop

USDA-ARS?s Scientific Manuscript database

Seven experimental lines of hard spring wheat were grown at up to five locations in 2016 and evaluated for kernel, milling, and bread baking quality against the check variety Glenn. Wheat samples were submitted through the Wheat Quality Council and processed and milled at the USDA-ARS Hard Red Spri...

40 CFR 63.6135 - How do I monitor and collect data to demonstrate continuous compliance?

Code of Federal Regulations, 2012 CFR

2012-07-01

... Combustion Turbines Continuous Compliance Requirements § 63.6135 How do I monitor and collect data to... quality assurance or quality control activities (including, as applicable, calibration checks and required... times the stationary combustion turbine is operating. (b) Do not use data recorded during monitor...

40 CFR 63.6135 - How do I monitor and collect data to demonstrate continuous compliance?

Code of Federal Regulations, 2013 CFR

2013-07-01

... Combustion Turbines Continuous Compliance Requirements § 63.6135 How do I monitor and collect data to... quality assurance or quality control activities (including, as applicable, calibration checks and required... times the stationary combustion turbine is operating. (b) Do not use data recorded during monitor...

40 CFR 63.6135 - How do I monitor and collect data to demonstrate continuous compliance?

Code of Federal Regulations, 2014 CFR

2014-07-01

... Combustion Turbines Continuous Compliance Requirements § 63.6135 How do I monitor and collect data to... quality assurance or quality control activities (including, as applicable, calibration checks and required... times the stationary combustion turbine is operating. (b) Do not use data recorded during monitor...

Applicability of refractometry for fast routine checking of hospital preparations.

PubMed

Hendrickx, Stijn; Verón, Aurora Monteagudo; Van Schepdael, Ann; Adams, Erwin

2016-04-30

Quality control of hospital pharmacy formulations is of the utmost importance to ensure constant quality and to avoid potential mistakes before administration to the patient. In this study we investigated the applicability of refractometry as a fast, inexpensive and easy-to-use quality control measurement. Refractive indices (RI) of a multitude of different hospital formulations with varying concentrations of active compound were measured. The samples consisted of a number of binary aqueous solutions (one compound in water), complex aqueous solutions (multiple compounds in water or in a constant matrix), two suspensions and one emulsion. For all these formulations, linear regression analysis was performed, quality control limits determined and accuracy and repeatability were checked. Subsequently, actual hospital pharmacy samples were analyzed to check whether they were within the specified limits. For both binary and complex aqueous formulations, repeatability was good and a linear correlation for all samples could be observed on condition that the concentration of the active compound was sufficiently high. The refractometer was not sensitive enough for solutions of folic acid and levothyroxine, which had too low a concentration of active compound. Due to lack of homogeneity and light scattering, emulsions and suspensions do not seem suitable for quality control by refractometry. A mathematical equation was generated to predict the refractive index of an aqueous solution containing clonidine HCl as active compound. Values calculated from the equation were compared with measured values and deviations of all samples were found to be lower than 1.3%. In order to use refractometry in a hospital pharmacy for quality control of multicomponent samples, additional intermediate measurements would be required, to overcome the fact that refractometry is not compound specific. In conclusion, we found that refractometry could potentially be useful for daily, fast quality measurements of relatively concentrated binary and more complex aqueous solutions in the hospital pharmacy. Copyright © 2016 Elsevier B.V. All rights reserved.

Department of Defense Travel Reengineering Pilot Report to Congress

DTIC Science & Technology

1997-06-01

Electronic Commerce /Electronic Data Interchange (EC/EDI) capabilities to integrate functions. automate edit checks for internal controls, and create user-friendly management tools at all levels of the process.

High-throughput biomonitoring of dioxins and polychlorinated biphenyls at the sub-picogram level in human serum.

PubMed

Focant, Jean-François; Eppe, Gauthier; Massart, Anne-Cécile; Scholl, Georges; Pirard, Catherine; De Pauw, Edwin

2006-10-13

We report on the use of a state-of-the-art method for the measurement of selected polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and polychlorinated biphenyls in human serum specimens. The sample preparation procedure is based on manual small size solid-phase extraction (SPE) followed by automated clean-up and fractionation using multi-sorbent liquid chromatography columns. SPE cartridges and all clean-up columns are disposable. Samples are processed in batches of 20 units, including one blank control (BC) sample and one quality control (QC) sample. The analytical measurement is performed using gas chromatography coupled to isotope dilution high-resolution mass spectrometry. The sample throughput corresponds to one series of 20 samples per day, from sample reception to data quality cross-check and reporting, once the procedure has been started and series of samples keep being produced. Four analysts are required to ensure proper performances of the procedure. The entire procedure has been validated under International Organization for Standardization (ISO) 17025 criteria and further tested over more than 1500 unknown samples during various epidemiological studies. The method is further discussed in terms of reproducibility, efficiency and long-term stability regarding the 35 target analytes. Data related to quality control and limit of quantification (LOQ) calculations are also presented and discussed.

Quality Analysis on 3d Buidling Models Reconstructed from Uav Imagery

NASA Astrophysics Data System (ADS)

Jarzabek-Rychard, M.; Karpina, M.

2016-06-01

Recent developments in UAV technology and structure from motion techniques have effected that UAVs are becoming standard platforms for 3D data collection. Because of their flexibility and ability to reach inaccessible urban parts, drones appear as optimal solution for urban applications. Building reconstruction from the data collected with UAV has the important potential to reduce labour cost for fast update of already reconstructed 3D cities. However, especially for updating of existing scenes derived from different sensors (e.g. airborne laser scanning), a proper quality assessment is necessary. The objective of this paper is thus to evaluate the potential of UAV imagery as an information source for automatic 3D building modeling at LOD2. The investigation process is conducted threefold: (1) comparing generated SfM point cloud to ALS data; (2) computing internal consistency measures of the reconstruction process; (3) analysing the deviation of Check Points identified on building roofs and measured with a tacheometer. In order to gain deep insight in the modeling performance, various quality indicators are computed and analysed. The assessment performed according to the ground truth shows that the building models acquired with UAV-photogrammetry have the accuracy of less than 18 cm for the plannimetric position and about 15 cm for the height component.

From ISO 9001:2008 to ISO 9001:2015: Significant changes and their impacts to aspiring organizations

NASA Astrophysics Data System (ADS)

Sari, Y.; Wibisono, E.; Wahyudi, R. D.; Lio, Y.

2017-11-01

ISO 9001:2015 is the latest version of ISO Quality Management System standard that has been updated recently from ISO 9001:2008. It is necessary for all organizations that have implemented and been certified with ISO 9001:2008 to prepare the transition and upgrade their Quality Management System because the certification will expire by September 2018. This paper attempts to provide knowledge on the significant changes from ISO 9001:2008 to ISO 9001:2015, what new requirements are added, and how they would impact the organizations. An exploratory and applied research was chosen as the research approach and aimed to explore what transition designs are needed to anticipate the changes as well as their impacts. The research applied a methodology of Plan-Do-Check-Action (PDCA) cycle into four organizations and their results were compared and discussed to explain the transition designs. Some qualitative methods such as observation and interview were used to collect the data. By addressing the new requirements, three transition designs that should be prepared are: (i) identifying needs from interested parties, (ii) analyzing internal and external factors of the organizations to formulate relevant strategies and quality objectives, and (iii) registering risks associated to business processes as well as organizational strategies.

Good health checks according to the general public; expectations and criteria: a focus group study.

PubMed

Stol, Yrrah H; Asscher, Eva C A; Schermer, Maartje H N

2018-06-22

Health checks or health screenings identify (risk factors for) disease in people without a specific medical indication. So far, the perspective of (potential) health check users has remained underexposed in discussions about the ethics and regulation of health checks. In 2017, we conducted a qualitative study with lay people from the Netherlands (four focus groups). We asked what participants consider characteristics of good and bad health checks, and whether they saw a role for the Dutch government. Participants consider a good predictive value the most important characteristic of a good health check. Information before, during and after the test, knowledgeable and reliable providers, tests for treatable (risk factors for) disease, respect for privacy, no unnecessary health risks and accessibility are also mentioned as criteria for good health checks. Participants make many assumptions about health check offers. They assume health checks provide certainty about the presence or absence of disease, that health checks offer opportunities for health benefits and that the privacy of health check data is guaranteed. In their choice for provider and test they tend to rely more on heuristics than information. Participants trust physicians to put the interest of potential health check users first and expect the Dutch government to intervene if providers other than physicians failed to do so by offering tests with a low predictive value, or tests that may harm people, or by infringing the privacy of users. Assumptions of participants are not always justified, but they may influence the choice to participate. This is problematic because choices for checks with a low predictive value that do not provide health benefits may create uncertainty and may cause harm to health; an outcome diametrically opposite to the one intended. Also, this may impair the relationship of trust with physicians and the Dutch government. To further and protect autonomous choice and to maintain trust, we recommend the following measures to timely adjust false expectations: advertisements that give an accurate impression of health check offers, and the installation of a quality mark.

The Single Soldier Quality of Life Initiative: Great Expectations of Privacy

DTIC Science & Technology

1995-04-01

without regard to their marital status and to hold them accountable to established standards. 18 To many "old soldiers," some of the ideas contained...Family Housing Office: assign and terminate quarters, conduct check-in and check-out inspections, maintain accountability of SQ furniture, follow up on...integrity is a second priority." 2 6 Further hindering unit integrity is that smoking preference of the soldiers must be taken into account when making

Quality of health care and the need for assessment.

PubMed

Bosse, G; Ngoli, B; Leshabari, M T; Külker, R; Dämmrich, T; Abels, W; Breuer, J P; Kersten, R; Spies, C

2011-09-01

In many hospitals of developing countries quality of care is below the expected standard to maintain patient safety. In 2006, health care experts from Tanzania and Germany collaborated on a set of indicators to be used as a hospital performance assessment tool. The aim of this study was to introduce this tool and check its feasibility for use in a Tanzanian regional hospital. Within the hospital, independent observers assessed quantitatively structural quality and the performance of health care encounter using an itemized scale from 0 (0%) to 2 (100%) for each defined item. Outcome parameters were taken from the annual hospital report. In addition, semi-qualitative interviews with staff and patients were held to a) assess staff knowledge of the treatment guidelines published by the Tanzanian Ministry of Health and Social Welfare (MoHSW), b) assess attitudes and user motivation and c) authenticate the quantitative findings in a mixed-method triangulation approach. Structural quality in maternity was at 75% of the expected standard, while process quality ranged from 36% (Care of the newborn with APGAR score < 4) to 47% (normal delivery procedure). Staff knowledge ranged between 64% and 87% with low motivation and commitment given as contributing factors. Outcome (maternal mortality) was 481/100,000 live births with an infant mortality rate of 10%. The tool appeared to be feasible and effective in judging care quality. It provides a model for continuous quality improvement. Motivation of health care workers, a strong determinant of care process quality, might be improved by strengthening internal factors in health facilities. For conclusive validation, further studies using the tool must be conducted with larger numbers of institutions.

OntoCheck: verifying ontology naming conventions and metadata completeness in Protégé 4

PubMed Central

2012-01-01

Background Although policy providers have outlined minimal metadata guidelines and naming conventions, ontologies of today still display inter- and intra-ontology heterogeneities in class labelling schemes and metadata completeness. This fact is at least partially due to missing or inappropriate tools. Software support can ease this situation and contribute to overall ontology consistency and quality by helping to enforce such conventions. Objective We provide a plugin for the Protégé Ontology editor to allow for easy checks on compliance towards ontology naming conventions and metadata completeness, as well as curation in case of found violations. Implementation In a requirement analysis, derived from a prior standardization approach carried out within the OBO Foundry, we investigate the needed capabilities for software tools to check, curate and maintain class naming conventions. A Protégé tab plugin was implemented accordingly using the Protégé 4.1 libraries. The plugin was tested on six different ontologies. Based on these test results, the plugin could be refined, also by the integration of new functionalities. Results The new Protégé plugin, OntoCheck, allows for ontology tests to be carried out on OWL ontologies. In particular the OntoCheck plugin helps to clean up an ontology with regard to lexical heterogeneity, i.e. enforcing naming conventions and metadata completeness, meeting most of the requirements outlined for such a tool. Found test violations can be corrected to foster consistency in entity naming and meta-annotation within an artefact. Once specified, check constraints like name patterns can be stored and exchanged for later re-use. Here we describe a first version of the software, illustrate its capabilities and use within running ontology development efforts and briefly outline improvements resulting from its application. Further, we discuss OntoChecks capabilities in the context of related tools and highlight potential future expansions. Conclusions The OntoCheck plugin facilitates labelling error detection and curation, contributing to lexical quality assurance in OWL ontologies. Ultimately, we hope this Protégé extension will ease ontology alignments as well as lexical post-processing of annotated data and hence can increase overall secondary data usage by humans and computers. PMID:23046606

A Ks-band-selected catalogue of objects in the ALHAMBRA survey

NASA Astrophysics Data System (ADS)

Nieves-Seoane, L.; Fernandez-Soto, A.; Arnalte-Mur, P.; Molino, A.; Stefanon, M.; Ferreras, I.; Ascaso, B.; Ballesteros, F. J.; Cristóbal-Hornillos, D.; López-Sanjuán, C.; Hurtado-Gil, Ll.; Márquez, I.; Masegosa, J.; Aguerri, J. A. L.; Alfaro, E.; Aparicio-Villegas, T.; Benítez, N.; Broadhurst, T.; Cabrera-Caño, J.; Castander, F. J.; Cepa, J.; Cerviño, M.; González Delgado, R. M.; Husillos, C.; Infante, L.; Martínez, V. J.; Moles, M.; Olmo, A. del; Perea, J.; Pović, M.; Prada, F.; Quintana, J. M.; Troncoso-Iribarren, P.; Viironen, K.

2017-02-01

The original ALHAMBRA catalogue contained over 400 000 galaxies selected using a synthetic F814W image, to the magnitude limit AB(F814W) ≈ 24.5. Given the photometric redshift depth of the ALHAMBRA multiband data ( = 0.86) and the approximately I-band selection, there is a noticeable bias against red objects at moderate redshift. We avoid this bias by creating a new catalogue selected in the Ks band. This newly obtained catalogue is certainly shallower in terms of apparent magnitude, but deeper in terms of redshift, with a significant population of red objects at z > 1. We select objects using the Ks band images, which reach an approximate AB magnitude limit Ks ≈ 22. We generate masks and derive completeness functions to characterize the sample. We have tested the quality of the photometry and photometric redshifts using both internal and external checks. Our final catalogue includes ≈95 000 sources down to Ks ≈ 22, with a significant tail towards high redshift. We have checked that there is a large sample of objects with spectral energy distributions that correspond to that of massive, passively evolving galaxies at z > 1, reaching as far as z ≈ 2.5. We have tested the possibility of combining our data with deep infrared observations at longer wavelengths, particularly Spitzer IRAC data.

[Design and implementation of data checking system for Chinese materia medica resources survey].

PubMed

Wang, Hui; Zhang, Xiao-Bo; Ge, Xiao-Guang; Jin, Yan; Jing, Zhi-Xian; Qi, Yuan-Hua; Wang, Ling; Zhao, Yu-Ping; Wang, Wei; Guo, Lan-Ping; Huang, Lu-Qi

2017-11-01

The Chinese material medica resources (CMMR) national survey information management system has collected a large amount of data. To help dealing with data recheck, reduce the work of inside, improve the recheck of survey data from provincial and county level, National Resource Center for Chinese Materia Medical has designed a data checking system for Chinese material medica resources survey based on J2EE technology, Java language, Oracle data base in accordance with the SOA framework. It includes single data check, check score, content manage, check the survey data census data with manual checking and automatic checking about census implementation plan, key research information, general survey information, cultivation of medicinal materials information, germplasm resources information the medicine information, market research information, traditional knowledge information, specimen information of this 9 aspects 20 class 175 indicators in two aspects of the quantity and quality. The established system assists in the completion of the data consistency and accuracy, pushes the county survey team timely to complete the data entry arrangement work, so as to improve the integrity, consistency and accuracy of the survey data, and ensure effective and available data, which lay a foundation for providing accurate data support for national survey of the Chinese material medica resources (CMMR) results summary, and displaying results and sharing. Copyright© by the Chinese Pharmaceutical Association.

Improving treatment plan evaluation with automation

PubMed Central

Covington, Elizabeth L.; Chen, Xiaoping; Younge, Kelly C.; Lee, Choonik; Matuszak, Martha M.; Kessler, Marc L.; Keranen, Wayne; Acosta, Eduardo; Dougherty, Ashley M.; Filpansick, Stephanie E.

2016-01-01

The goal of this work is to evaluate the effectiveness of Plan‐Checker Tool (PCT) which was created to improve first‐time plan quality, reduce patient delays, increase the efficiency of our electronic workflow, and standardize and automate the physics plan review in the treatment planning system (TPS). PCT uses an application programming interface to check and compare data from the TPS and treatment management system (TMS). PCT includes a comprehensive checklist of automated and manual checks that are documented when performed by the user as part of a plan readiness check for treatment. Prior to and during PCT development, errors identified during the physics review and causes of patient treatment start delays were tracked to prioritize which checks should be automated. Nineteen of 33 checklist items were automated, with data extracted with PCT. There was a 60% reduction in the number of patient delays in the six months after PCT release. PCT was successfully implemented for use on all external beam treatment plans in our clinic. While the number of errors found during the physics check did not decrease, automation of checks increased visibility of errors during the physics check, which led to decreased patient delays. The methods used here can be applied to any TMS and TPS that allows queries of the database. PACS number(s): 87.55.‐x, 87.55.N‐, 87.55.Qr, 87.55.tm, 89.20.Bb PMID:27929478

National implementation of multi-parametric magnetic resonance imaging for prostate cancer detection - recommendations from a UK consensus meeting.

PubMed

Brizmohun Appayya, Mrishta; Adshead, Jim; Ahmed, Hashim U; Allen, Clare; Bainbridge, Alan; Barrett, Tristan; Giganti, Francesco; Graham, John; Haslam, Phil; Johnston, Edward W; Kastner, Christof; Kirkham, Alexander P S; Lipton, Alexandra; McNeill, Alan; Moniz, Larissa; Moore, Caroline M; Nabi, Ghulam; Padhani, Anwar R; Parker, Chris; Patel, Amit; Pursey, Jacqueline; Richenberg, Jonathan; Staffurth, John; van der Meulen, Jan; Walls, Darren; Punwani, Shonit

2018-07-01

To identify areas of agreement and disagreement in the implementation of multi-parametric magnetic resonance imaging (mpMRI) of the prostate in the diagnostic pathway. Fifteen UK experts in prostate mpMRI and/or prostate cancer management across the UK (involving nine NHS centres to provide for geographical spread) participated in a consensus meeting following the Research and Development Corporation and University of California-Los Angeles (UCLA-RAND) Appropriateness Method, and were moderated by an independent chair. The experts considered 354 items pertaining to who can request an mpMRI, prostate mpMRI protocol, reporting guidelines, training, quality assurance (QA) and patient management based on mpMRI levels of suspicion for cancer. Each item was rated for agreement on a 9-point scale. A panel median score of ≥7 constituted 'agreement' for an item; for an item to reach 'consensus', a panel majority scoring was required. Consensus was reached on 59% of items (208/354); these were used to provide recommendations for the implementation of prostate mpMRI in the UK. Key findings include prostate mpMRI requests should be made in consultation with the urological team; mpMRI scanners should undergo QA checks to guarantee consistently high diagnostic quality scans; scans should only be reported by trained and experienced radiologists to ensure that men with unsuspicious prostate mpMRI might consider avoiding an immediate biopsy. Our consensus statements demonstrate a set of criteria that are required for the practical dissemination of consistently high-quality prostate mpMRI as a diagnostic test before biopsy in men at risk. © 2018 The Authors BJU International published by John Wiley & Sons Ltd on behalf of BJU International.

Internal combustion engine for natural gas compressor operation

DOEpatents

Hagen, Christopher; Babbitt, Guy

2016-12-27

This application concerns systems and methods for compressing natural gas with an internal combustion engine. In a representative embodiment, a method is featured which includes placing a first cylinder of an internal combustion engine in a compressor mode, and compressing a gas within the first cylinder, using the cylinder as a reciprocating compressor. In some embodiments a compression check valve system is used to regulate pressure and flow within cylinders of the engine during a compression process.

Occurrence of Multiple Sclerosis After Drug Exposure: Insights From Evidence Mapping.

PubMed

Antonazzo, Ippazio Cosimo; Raschi, Emanuel; Vignatelli, Luca; Baldin, Elisa; Riise, Trond; D'Alessandro, Roberto; De Ponti, Fabrizio; Poluzzi, Elisabetta

2017-09-01

The role of drugs in the occurrence of multiple sclerosis (MS) is perceived to be insufficiently investigated. The aim of this study was to map and assess the evidence on MS occurrence after drug exposure, in order to identify possible signals of causal association. A search strategy was performed in MEDLINE and Embase as of July 2016; references consistent with the aim of the study were analysed to extract relevant measures of causal association between drugs and MS. The Newcastle-Ottawa Scale and appropriate guidelines from the International Society for Pharmacoepidemiology (ISPE) and the International Society of Pharmacovigilance (ISoP) were used to assess the quality of included studies. After screening 832 articles, 58 were selected (of which 14 were found by checking the reference lists of reviews): 30 case reports and case series, 24 longitudinal studies and four randomized controlled trials. Seven longitudinal studies had good (at least 7 out of 9) quality scores, whereas case reports/case series presented several limitations. Half of included articles focused on immunomodulatory drugs (etanercept, infliximab and adalimumab), especially in case reports/series, suggesting an association with MS occurrence. Contraceptives and antibacterials were investigated in some population-based studies, without definite results. A heterogeneous pharmacological profile of identified classes emerged. Low strength of evidence and conflicting results highlighted the difficulties in addressing the possible contribution of drugs in MS occurrence. Methodological advances are needed, especially to control the confounding role of underlying disease for specific drug classes.

Making a 403(b) Checklist--and Checking It Twice

ERIC Educational Resources Information Center

Blinn, Linda Segal

2013-01-01

The prospect of an IRS 403(b) audit can be daunting, but as the old saying goes, knowing is half the battle. Understanding what to expect during the audit process and having the proper internal controls are the keys to avoiding stress. As part of a traditional IRS 403(b) plan audit, the Internal Revenue Service has requested that plan sponsors…

Poster — Thur Eve — 17: In-phantom and Fluence-based Measurements for Quality Assurance of Volumetric-driven Adaptation of Arc Therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schaly, B; Hoover, D; Mitchell, S

2014-08-15

During volumetric modulated arc therapy (VMAT) of head and neck cancer, some patients lose weight which may result in anatomical deviations from the initial plan. If these deviations are substantial a new treatment plan can be designed for the remainder of treatment (i.e., adaptive planning). Since the adaptive treatment process is resource intensive, one possible approach to streamlining the quality assurance (QA) process is to use the electronic portal imaging device (EPID) to measure the integrated fluence for the adapted plans instead of the currently-used ArcCHECK device (Sun Nuclear). Although ArcCHECK is recognized as the clinical standard for patient-specific VMATmore » plan QA, it has limited length (20 cm) for most head and neck field apertures and has coarser detector spacing than the EPID (10 mm vs. 0.39 mm). In this work we compared measurement of the integrated fluence using the EPID with corresponding measurements from the ArcCHECK device. In the past year nine patients required an adapted plan. Each of the plans (the original and adapted) is composed of two arcs. Routine clinical QA was performed using the ArcCHECK device, and the same plans were delivered to the EPID (individual arcs) in integrated mode. The dose difference between the initial plan and adapted plan was compared for ArcCHECK and EPID. In most cases, it was found that the EPID is more sensitive in detecting plan differences. Therefore, we conclude that EPID provides a viable alternative for QA of the adapted head and neck plans and should be further explored.« less

Stability of Internal Space in Kaluza-Klein Theory

NASA Astrophysics Data System (ADS)

Maeda, K.; Soda, J.

1998-12-01

We extend a model studied by Li and Gott III to investigate a stability of internal space in Kaluza-Klein theory. Our model is a four-dimensional de-Sitter space plus a n-dimensional compactified internal space. We introduce a solution of the semi-classical Einstein equation which shows us the fact that a n-dimensional compactified internal space can be stable by the Casimir effect. The self-consistency of this solution is checked. One may apply this solution to study the issue of the Black Hole singularity.

40 CFR 75.59 - Certification, quality assurance, and quality control record provisions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... and the run average); (B) The raw data and results for all required pre-test, post-test, pre-run and...-day calibration error tests, all daily system integrity checks (Hg monitors, only), and all off-line calibration demonstrations, including any follow-up tests after corrective action: (i) Component-system...

Improving NAVFAC's total quality management of construction drawings with CLIPS

NASA Technical Reports Server (NTRS)

Antelman, Albert

1991-01-01

A diagnostic expert system to improve the quality of Naval Facilities Engineering Command (NAVFAC) construction drawings and specification is described. C Language Integrated Production System (CLIPS) and computer aided design layering standards are used in an expert system to check and coordinate construction drawings and specifications to eliminate errors and omissions.

Planning and Implementing Total Quality Management in the Royal Australian Air Force: A Multiple Case Study Analysis

DTIC Science & Technology

1990-09-01

change barriers, and necessary checks and balances built into processes. Furthermore, this assessment should address management system variables which...organisation’s 69 immediate product and their worklife . Focus must be maintained on improving RAAF processes. In addition to a quality committee structure as

Evaluation and use of the Materials and Test (MATT) Data System for quality of construction and management review : final report.

DOT National Transportation Integrated Search

1985-12-01

This report documents the review of the MATerials and Test (MATT) Data System to check the validity of data within the system. A computer program to generate the quality level of a construction material was developed. Programs were also developed to ...

Radiation Safety and Quality Assurance in North American Dental Schools.

ERIC Educational Resources Information Center

Farman, Allan G.; Hines, Vickie G.

1986-01-01

A survey of dental schools that revealed processing quality control and routine maintenance checks on x-ray generators are being carried out in a timely manner is discussed. However, methods for reducing patient exposure to radiation are not being fully implemented, and some dental students are being exposed to x-rays. (Author/MLW)

Internal robustness: systematic search for systematic bias in SN Ia data

NASA Astrophysics Data System (ADS)

Amendola, Luca; Marra, Valerio; Quartin, Miguel

2013-04-01

A great deal of effort is currently being devoted to understanding, estimating and removing systematic errors in cosmological data. In the particular case of Type Ia supernovae, systematics are starting to dominate the error budget. Here we propose a Bayesian tool for carrying out a systematic search for systematic contamination. This serves as an extension to the standard goodness-of-fit tests and allows not only to cross-check raw or processed data for the presence of systematics but also to pin-point the data that are most likely contaminated. We successfully test our tool with mock catalogues and conclude that the Union2.1 data do not possess a significant amount of systematics. Finally, we show that if one includes in Union2.1 the supernovae that originally failed the quality cuts, our tool signals the presence of systematics at over 3.8σ confidence level.

AMBER instrument control software

NASA Astrophysics Data System (ADS)

Le Coarer, Etienne P.; Zins, Gerard; Gluck, Laurence; Duvert, Gilles; Driebe, Thomas; Ohnaka, Keiichi; Heininger, Matthias; Connot, Claus; Behrend, Jan; Dugue, Michel; Clausse, Jean Michel; Millour, Florentin

2004-09-01

AMBER (Astronomical Multiple BEam Recombiner) is a 3 aperture interferometric recombiner operating between 1 and 2.5 um, for the Very Large Telescope Interferometer (VLTI). The control software of the instrument, based on the VLT Common Software, has been written to comply with specific features of the AMBER hardware, such as the Infrared detector read out modes or piezo stage drivers, as well as with the very specific operation modes of an interferomtric instrument. In this respect, the AMBER control software was designed to insure that all operations, from the preparation of the observations to the control/command of the instrument during the observations, would be kept as simple as possible for the users and operators, opening the use of an interferometric instrument to the largest community of astronomers. Peculiar attention was given to internal checks and calibration procedures both to evaluate data quality in real time, and improve the successes of long term UV plane coverage observations.

Lean Six Sigma in Health Care: Improving Utilization and Reducing Waste.

PubMed

Almorsy, Lamia; Khalifa, Mohamed

2016-01-01

Healthcare costs have been increasing worldwide mainly due to over utilization of resources. The savings potentially achievable from systematic, comprehensive, and cooperative reduction in waste are far higher than from more direct and blunter cuts in care and coverage. At King Faisal Specialist Hospital and Research Center inappropriate and over utilization of the glucose test strips used for whole blood glucose determination using glucometers was observed. The hospital implemented a project to improve its utilization. Using the Six Sigma DMAIC approach (Define, Measure, Analyze, Improve and Control), an efficient practice was put in place including updating the related internal policies and procedures and the proper implementation of an effective users' training and competency check off program. That resulted in decreasing the unnecessary Quality Control (QC) runs from 13% to 4%, decreasing the failed QC runs from 14% to 7%, lowering the QC to patient testing ratio from 24/76 to 19/81.

Software Quality Control at Belle II

NASA Astrophysics Data System (ADS)

Ritter, M.; Kuhr, T.; Hauth, T.; Gebard, T.; Kristof, M.; Pulvermacher, C.; Belle Software Group, II

2017-10-01

Over the last seven years the software stack of the next generation B factory experiment Belle II has grown to over one million lines of C++ and Python code, counting only the part included in offline software releases. There are several thousand commits to the central repository by about 100 individual developers per year. To keep a coherent software stack of high quality that it can be sustained and used efficiently for data acquisition, simulation, reconstruction, and analysis over the lifetime of the Belle II experiment is a challenge. A set of tools is employed to monitor the quality of the software and provide fast feedback to the developers. They are integrated in a machinery that is controlled by a buildbot master and automates the quality checks. The tools include different compilers, cppcheck, the clang static analyzer, valgrind memcheck, doxygen, a geometry overlap checker, a check for missing or extra library links, unit tests, steering file level tests, a sophisticated high-level validation suite, and an issue tracker. The technological development infrastructure is complemented by organizational means to coordinate the development.

SU-F-T-272: Patient Specific Quality Assurance of Prostate VMAT Plans with Portal Dosimetry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Darko, J; Osei, E; University of Waterloo, Waterloo, ON

Purpose: To evaluate the effectiveness of using the Portal Dosimetry (PD) method for patient specific quality assurance of prostate VMAT plans. Methods: As per institutional protocol all VMAT plans were measured using the Varian Portal Dosimetry (PD) method. A gamma evaluation criterion of 3%-3mm with a minimum area gamma pass rate (gamma <1) of 95% is used clinically for all plans. We retrospectively evaluated the portal dosimetry results for 170 prostate patients treated with VMAT technique. Three sets of criterions were adopted for re-evaluating the measurements; 3%-3mm, 2%-2mm and 1%-1mm. For all criterions two areas, Field+1cm and MLC-CIAO were analysed.Tomore » ascertain the effectiveness of the portal dosimetry technique in determining the delivery accuracy of prostate VMAT plans, 10 patients previously measured with portal dosimetry, were randomly selected and their measurements repeated using the ArcCHECK method. The same criterion used in the analysis of PD was used for the ArcCHECK measurements. Results: All patient plans reviewed met the institutional criteria for Area Gamma pass rate. Overall, the gamma pass rate (gamma <1) decreases for 3%-3mm, 2%-2mm and 1%-1mm criterion. For each criterion the pass rate was significantly reduced when the MLC-CIAO was used instead of FIELD+1cm. There was noticeable change in sensitivity for MLC-CIAO with 2%-2mm criteria and much more significant reduction at 1%-1mm. Comparable results were obtained for the ArcCHECK measurements. Although differences were observed between the clockwise verses the counter clockwise plans in both the PD and ArcCHECK measurements, this was not deemed to be statistically significant. Conclusion: This work demonstrates that Portal Dosimetry technique can be effectively used for quality assurance of VMAT plans. Results obtained show similar sensitivity compared to ArcCheck. To reveal certain delivery inaccuracies, the use of a combination of criterions may provide an effective way in improving the overall sensitivity of PD. Funding provided in part by the Prostate Ride for Dad, Kitchener-Waterloo, Canada.« less

Using the Benford's Law as a First Step to Assess the Quality of the Cancer Registry Data.

PubMed

Crocetti, Emanuele; Randi, Giorgia

2016-01-01

Benford's law states that the distribution of the first digit different from 0 [first significant digit (FSD)] in many collections of numbers is not uniform. The aim of this study is to evaluate whether population-based cancer incidence rates follow Benford's law, and if this can be used in their data quality check process. We sampled 43 population-based cancer registry populations (CRPs) from the Cancer Incidence in 5 Continents-volume X (CI5-X). The distribution of cancer incidence rate FSD was evaluated overall, by sex, and by CRP. Several statistics, including Pearson's coefficient of correlation and distance measures, were applied to check the adherence to the Benford's law. In the whole dataset (146,590 incidence rates) and for each sex (70,722 male and 75,868 female incidence rates), the FSD distributions were Benford-like. The coefficient of correlation between observed and expected FSD distributions was extremely high (0.999), and the distance measures low. Considering single CRP (from 933 to 7,222 incidence rates), the results were in agreement with the Benford's law, and only a few CRPs showed possible discrepancies from it. This study demonstrated for the first time that cancer incidence rates follow Benford's law. This characteristic can be used as a new, simple, and objective tool in data quality evaluation. The analyzed data had been already checked for publication in CI5-X. Therefore, their quality was expected to be good. In fact, only for a few CRPs several statistics were consistent with possible violations.

STS-97 Mission Specialist Noriega during pre-pack and fit check

NASA Technical Reports Server (NTRS)

2000-01-01

STS-97 Mission Specialist Carlos Noriega gets help with his boots from suit technician Shelly Grick-Agrella during pre-pack and fit check. Mission STS-97 is the sixth construction flight to the International Space Station. Its payload includes the P6 Integrated Truss Structure and a photovoltaic (PV) module, with giant solar arrays that will provide power to the Station. The mission includes two spacewalks to complete the solar array connections. STS-97 is scheduled to launch Nov. 30 at about 10:06 p.m. EST.

STS-104 Crew Training of Jim Reilly in EMU fit check

NASA Image and Video Library

2001-04-09

JSC2001-E-11687 (9 April 2001) --- Astronaut James F. Reilly, STS-104 mission specialist, prepares to don his Extravehicular Mobility Unit (EMU) space suit for a fit check in one of the chambers in the Crew Systems Laboratory at the Johnson Space Center (JSC). Reilly is wearing a thermal undergarment over which he will wear the EMU. The STS-104 mission to the International Space Station (ISS) represents the Space Shuttle Atlantis' first flight using a new engine and is targeted for a liftoff no earlier than June 14, 2001.

A national analytical quality assurance program: Developing guidelines and analytical tools for the forest inventory and analysis program

Treesearch

Phyllis C. Adams; Glenn A. Christensen

2012-01-01

A rigorous quality assurance (QA) process assures that the data and information provided by the Forest Inventory and Analysis (FIA) program meet the highest possible standards of precision, completeness, representativeness, comparability, and accuracy. FIA relies on its analysts to check the final data quality prior to release of a State’s data to the national FIA...

Flow Control and Design Assessment for Drainage System at McMurdo Station, Antarctica

DTIC Science & Technology

2014-11-24

Council BMP Best Management Practice CASQUA California Storm Water Quality Task Force CRREL Cold Regions Research and Engineering Laboratory DS...ponds The California Storm Water Quality Task Force (CASQUA 1993) defines a sediment basin as “a pond created by excavation or constructing an em...British Standards Institution. California Storm Water Quality Task Force (CASQUA). 1993. ESC41: Check Dams. In Stormwater Best Management Practices

Drug supply in in-patient nursing care facilities: reasons for irregularities in quality reviews

PubMed

Meinck, Matthias; Ernst, Friedemann; Pippel, Kristina; Gehrke, Jörg; Coners, Elise

2017-01-01

Background: Quality checks of the independent German Health Insurance Medical Service in in-patient nursing care facilities pursuant to Articles 114 et seqq. SGB XI [11th Book of the Social Code] also comprise the Pflegerische Medikamentenversorgung (PMV) [drug supply by nursing personnel]. Irregularities are described in quality reports in the reviewer’s own words. This investigation was intended to categorise the reasons for the above irregularities. Methods: The bases for the examination are the reports of quality checks of all of in-patient nursing care facilities conducted in 2014 (regular quality checks) in Hamburg and Schleswig-Holstein (N = 671), in which the PMV was examined for 5 742 randomly selected residents. Results: With regard to the documentation, inexplicable drug intakes (5.8 %) were found most frequently, followed by missing information on dosages and application provisions (0.8 % each), which were registered as irregularities at the residents. In the documentation of on-demand medication, insufficient indication data (3.2 %), missing daily maximum dosages (0.8 %) and missing single doses (0.6 %) were most commonly ascertained. The most frequent reasons for medication handling irregularities for the residents were false positioning (6.0 %), missing and respectively false data on consumption and on when the medical packaging was opened (3.5 %), as well as medication not directly administered using the blister (0.7 %). As for subordinate classifications of false positioning, incorrect dosages were revealed most often, followed by drugs with an exceeded expiry date and by out-of-stock drugs. Systematic patient-related factors with influence on PMV could not be determined. Conclusions: The extent of the irregularities and their type prompt a further increase in the efforts to improve the quality of nursing care facilities. The results can be used as a basis for designing specific initiatives to improve the PMV.

Simple case definition of clinical benign prostatic hyperplasia, based on International Prostate Symptom Score, predicts general practitioner consultation rates.

PubMed

Kok, Esther T; Bohnen, Arthur M; Jonkheijm, Rikkert; Gouweloos, Jochem; Groeneveld, Frans P M J; Thomas, Siep; Bosch, J L H Ruud

2006-10-01

To determine which case-definition of clinical benign prostatic hyperplasia (BPH) has the best predictive value for general practitioner visits for lower urinary tract symptoms (LUTS) suggestive of BPH. The incidence and prevalence rates of general practitioner visits for LUTS were also determined. A longitudinal, population-based study from 1995 to 2003 was conducted among 1688 men aged 50 to 78 years old. Data were collected on physical urologic parameters, quality of life, and symptom severity as determined from the International Prostate Symptom Score. Information on health-care-seeking behavior of all participants was collected from the general practitioner (GP) record using a computerized search engine and an additional manual check of the electronically selected files. The incidence and prevalence rate of the men at risk was 19.6% and 14.0%, respectively, and these rates increased with age. For sensitivity and the positive predictive value, the case-definition of clinical BPH as an International Prostate Symptom Score greater than 7 had the best predictive value for GP visits for LUTS within 2 years after baseline. Because only marginal improvement (greater specificity but lower sensitivity) in the prediction of GP visits for LUTS was possible by adding information on prostate volume and flow, for the prediction of future GP visits for LUTS suggestive of BPH, we suggest that the International Prostate Symptom Score questionnaire be used and that estimation of the prostate volume and flow is not required.

7 CFR 58.243 - Checking quality.

Code of Federal Regulations, 2012 CFR

2012-01-01

.... Periodically samples of product and environmental material shall be tested for salmonella. Test results shall be negative when samples are tested for salmonella. Line samples should be taken periodically as an...

7 CFR 58.243 - Checking quality.

Code of Federal Regulations, 2013 CFR

2013-01-01

.... Periodically samples of product and environmental material shall be tested for salmonella. Test results shall be negative when samples are tested for salmonella. Line samples should be taken periodically as an...

7 CFR 58.243 - Checking quality.

Code of Federal Regulations, 2014 CFR

2014-01-01

.... Periodically samples of product and environmental material shall be tested for salmonella. Test results shall be negative when samples are tested for salmonella. Line samples should be taken periodically as an...

7 CFR 58.243 - Checking quality.

Code of Federal Regulations, 2011 CFR

2011-01-01

.... Periodically samples of product and environmental material shall be tested for salmonella. Test results shall be negative when samples are tested for salmonella. Line samples should be taken periodically as an...

Continuous improvement of the quality reporting system of a medium-size company

NASA Astrophysics Data System (ADS)

Hawkins, Anthony; Onuh, Spencer

2001-10-01

Many companies are faced with quality improvement issues on a daily basis but their response to this problem varies. This paper discusses the improvement in the defect reporting system at a medium sized manufacturing company following the appointment of an experienced, motivated, design engineer to be dedicated to that task. It sets out the situation that the engineer inherited and details the changes that were incorporated; it assesses which were successful and which failed. Following a survey of current literature, it was seen that there is little written specifically on the subject of audited defect reporting. It is felt that this study goes some way to filling that void. A successful survey of engineering companies in Southern Hampshire reinforces the principle findings, that the emphasising of the Check part of Demming's Plan-Do-Check-Act cycle is a novel approach to the Quality Improvement Process, and that it has reduced the cost of rework by an audited 80% in a period of two years.

Quality control of FWC during assembly and commissioning in SST-1 Tokamak

NASA Astrophysics Data System (ADS)

Patel, Hitesh; Santra, Prosenjit; Parekh, Tejas; Biswas, Prabal; Jayswal, Snehal; Chauhan, Pradeep; Paravastu, Yuvakiran; George, Siju; Semwal, Pratibha; Thankey, Prashant; Ramesh, Gattu; Prakash, Arun; Dhanani, Kalpesh; Raval, D. C.; Khan, Ziauddin; Pradhan, Subrata

2017-04-01

First Wall Components (FWC) of SST-1 tokamak, which are in the immediate vicinity of plasma, comprises of limiters, divertors, baffles, passive stabilizers designed to operate long duration (∼1000 s) discharges of elongated plasma. All FWC consist of copper alloy heat sink modules with SS cooling tubes brazed onto it, graphite tiles acting as armour material facing the plasma, and are mounted to the vacuum vessels with suitable Inconel support structures at inter-connected ring & port locations. The FWC are very recently assembled and commissioned successfully inside the vacuum vessel of SST-1 undergoing a rigorous quality control and checks at every stage of the assembly process. This paper will present the quality control aspects and checks of FWC from commencement of assembly procedure, namely material test reports, leak testing of high temperature baked components, assembled dimensional tolerances, leak testing of all welded joints, graphite tile tightening torques, electrical continuity and electrical isolation of passive stabilizers from vacuum vessel, baking and cooling hydraulic connections inside vacuum vessel.

Quality of surgical randomized controlled trials for acute cholecystitis: assessment based on CONSORT and additional check items.

PubMed

Shikata, Satoru; Nakayama, Takeo; Yamagishi, Hisakazu

2008-01-01

In this study, we conducted a limited survey of reports of surgical randomized controlled trials, using the consolidated standards of reporting trials (CONSORT) statement and additional check items to clarify problems in the evaluation of surgical reports. A total of 13 randomized trials were selected from two latest review articles on biliary surgery. Each randomized trial was evaluated according to 28 quality measures that comprised items from the CONSORT statement plus additional items. Analysis focused on relationships between the quality of each study and the estimated effect gap ("pooled estimate in meta-analysis" -- "estimated effect of each study"). No definite relationships were found between individual study quality and the estimated effect gap. The following items could have been described but were not provided in almost all the surgical RCT reports: "clearly defined outcomes"; "details of randomization"; "participant flow charts"; "intention-to-treat analysis"; "ancillary analyses"; and "financial conflicts of interest". The item, "participation of a trial methodologist in the study" was not found in any of the reports. Although the quality of reporting trials is not always related to a biased estimation of treatment effect, the items used for quality measures must be described to enable readers to evaluate the quality and applicability of the reporting. Further development of an assessment tool is needed for items specific to surgical randomized controlled trials.

Using Cognitive Interviews to Pilot an International Survey of Principal Preparation: A Western Australian Perspective

ERIC Educational Resources Information Center

Wildy, Helen; Clarke, Simon

2009-01-01

This paper provides an example of the application of the cognitive interview, a qualitative tool for pre-testing a survey instrument to check its cognitive validity, that is, whether the items mean to respondents what they mean to the item designers. The instrument is the survey used in the final phase of the International Study of Principal…

Preparation for a Changing World: Quality Education Program Study. Booklet 10-A (Needs Assessment).

ERIC Educational Resources Information Center

Bucks County Public Schools, Doylestown, PA.

The general needs assessment instrument can provide the means for a school district to assess its needs relative to the Ten Goals of Quality Education. It is comprised of behavior statements taken from the category schemes. The student must check the appropriate number for each statement representing "always" through "never".…

MOM: A meteorological data checking expert system in CLIPS

NASA Technical Reports Server (NTRS)

Odonnell, Richard

1990-01-01

Meteorologists have long faced the problem of verifying the data they use. Experience shows that there is a sizable number of errors in the data reported by meteorological observers. This is unacceptable for computer forecast models, which depend on accurate data for accurate results. Most errors that occur in meteorological data are obvious to the meteorologist, but time constraints prevent hand-checking. For this reason, it is necessary to have a 'front end' to the computer model to ensure the accuracy of input. Various approaches to automatic data quality control have been developed by several groups. MOM is a rule-based system implemented in CLIPS and utilizing 'consistency checks' and 'range checks'. The system is generic in the sense that it knows some meteorological principles, regardless of specific station characteristics. Specific constraints kept as CLIPS facts in a separate file provide for system flexibility. Preliminary results show that the expert system has detected some inconsistencies not noticed by a local expert.

Preliminary Retrospective Analysis of Daily Tomotherapy Output Constancy Checks Using Statistical Process Control.

PubMed

Mezzenga, Emilio; D'Errico, Vincenzo; Sarnelli, Anna; Strigari, Lidia; Menghi, Enrico; Marcocci, Francesco; Bianchini, David; Benassi, Marcello

2016-01-01

The purpose of this study was to retrospectively evaluate the results from a Helical TomoTherapy Hi-Art treatment system relating to quality controls based on daily static and dynamic output checks using statistical process control methods. Individual value X-charts, exponentially weighted moving average charts, and process capability and acceptability indices were used to monitor the treatment system performance. Daily output values measured from January 2014 to January 2015 were considered. The results obtained showed that, although the process was in control, there was an out-of-control situation in the principal maintenance intervention for the treatment system. In particular, process capability indices showed a decreasing percentage of points in control which was, however, acceptable according to AAPM TG148 guidelines. Our findings underline the importance of restricting the acceptable range of daily output checks and suggest a future line of investigation for a detailed process control of daily output checks for the Helical TomoTherapy Hi-Art treatment system.

Modelling spoilage of fresh turbot and evaluation of a time-temperature integrator (TTI) label under fluctuating temperature.

PubMed

Nuin, Maider; Alfaro, Begoña; Cruz, Ziortza; Argarate, Nerea; George, Susie; Le Marc, Yvan; Olley, June; Pin, Carmen

2008-10-31

Kinetic models were developed to predict the microbial spoilage and the sensory quality of fresh fish and to evaluate the efficiency of a commercial time-temperature integrator (TTI) label, Fresh Check(R), to monitor shelf life. Farmed turbot (Psetta maxima) samples were packaged in PVC film and stored at 0, 5, 10 and 15 degrees C. Microbial growth and sensory attributes were monitored at regular time intervals. The response of the Fresh Check device was measured at the same temperatures during the storage period. The sensory perception was quantified according to a global sensory indicator obtained by principal component analysis as well as to the Quality Index Method, QIM, as described by Rahman and Olley [Rahman, H.A., Olley, J., 1984. Assessment of sensory techniques for quality assessment of Australian fish. CSIRO Tasmanian Regional Laboratory. Occasional paper n. 8. Available from the Australian Maritime College library. Newnham. Tasmania]. Both methods were found equally valid to monitor the loss of sensory quality. The maximum specific growth rate of spoilage bacteria, the rate of change of the sensory indicators and the rate of change of the colour measurements of the TTI label were modelled as a function of temperature. The temperature had a similar effect on the bacteria, sensory and Fresh Check kinetics. At the time of sensory rejection, the bacterial load was ca. 10(5)-10(6) cfu/g. The end of shelf life indicated by the Fresh Check label was close to the sensory rejection time. The performance of the models was validated under fluctuating temperature conditions by comparing the predicted and measured values for all microbial, sensory and TTI responses. The models have been implemented in a Visual Basic add-in for Excel called "Fish Shelf Life Prediction (FSLP)". This program predicts sensory acceptability and growth of spoilage bacteria in fish and the response of the TTI at constant and fluctuating temperature conditions. The program is freely available at http://www.azti.es/muestracontenido.asp?idcontenido=980&content=15&nodo1=30&nodo2=0.

Tyurin with PLANTS-2

NASA Image and Video Library

2007-02-28

ISS014-E-15475 (28 Feb. 2007) --- Cosmonaut Mikhail Tyurin, Expedition 14 flight engineer representing Russia's Federal Space Agency, checks the progress of plants growing in the Russian Lada greenhouse in the Zvezda Service Module of the International Space Station.

Tyurin with PLANTS-2

NASA Image and Video Library

2007-02-28

ISS014-E-15479 (28 Feb. 2007) --- Cosmonaut Mikhail Tyurin, Expedition 14 flight engineer representing Russia's Federal Space Agency, checks the progress of plants growing in the Russian Lada greenhouse in the Zvezda Service Module of the International Space Station.

The Mars Science Laboratory Organic Check Material

NASA Astrophysics Data System (ADS)

Conrad, Pamela G.; Eigenbrode, Jennifer L.; Von der Heydt, Max O.; Mogensen, Claus T.; Canham, John; Harpold, Dan N.; Johnson, Joel; Errigo, Therese; Glavin, Daniel P.; Mahaffy, Paul R.

2012-09-01

Mars Science Laboratory's Curiosity rover carries a set of five external verification standards in hermetically sealed containers that can be sampled as would be a Martian rock, by drilling and then portioning into the solid sample inlet of the Sample Analysis at Mars (SAM) suite. Each organic check material (OCM) canister contains a porous ceramic solid, which has been doped with a fluorinated hydrocarbon marker that can be detected by SAM. The purpose of the OCM is to serve as a verification tool for the organic cleanliness of those parts of the sample chain that cannot be cleaned other than by dilution, i.e., repeated sampling of Martian rock. SAM possesses internal calibrants for verification of both its performance and its internal cleanliness, and the OCM is not used for that purpose. Each OCM unit is designed for one use only, and the choice to do so will be made by the project science group (PSG).

[The development of obstetric ultrasound in Switzerland].

PubMed

Zimmermann, Roland

2005-04-01

Ultrasound has conquered obstetrics during the last 40 years. Today it is an integral part of antenatal care. Its broad use as a screening method has pushed critics who found open doors at health authorities facing short resources. In Switzerland in early 1996, routine ultrasound as a health technology was temporarily excluded from reimbursement by the health insurances. Under the pressure of the public, the health authorities had to reintroduce reimbursement within a few months. However, reimbursement was linked with several conditions: the ultrasound examination has to be performed by physicians with adequate training and experience; routine ultrasound needs a strict informed consent, and its benefit has to be evidenced. This decision has had a positive impact on quality. After 7 years, Switzerland has a good training program; guidelines for prenatal ultrasound already exist in their second edition, and spot checks of performance showed that quality in Switzerland meets international standards. Ultrasound mainly has a positive cost-effectiveness ratio due to the detection of fetal malformations with consecutive termination of pregnancy. Since termination of pregnancy is ethically questionable, the discussion with respect to reimbursement will most probably go on. In this light, a comprehensive informed consent of the pregnant women is essential.

Results of the Excreta Bioassay Quality Control Program for April 1, 2009 through March 31, 2010

DOE Office of Scientific and Technical Information (OSTI.GOV)

Antonio, Cheryl L.

2012-07-19

A total of 58 urine samples and 10 fecal samples were submitted during the report period (April 1, 2009 through March 31, 2010) to General Engineering Laboratories, South Carolina by the Hanford Internal Dosimetry Program (IDP) to check the accuracy, precision, and detection levels of their analyses. Urine analyses for Sr, 238Pu, 239Pu, 241Am, 243Am 235U, 238U, elemental uranium and fecal analyses for 241Am, 238Pu and 239Pu were tested this year as well as four tissue samples for 238Pu, 239Pu, 241Am and 241Pu. The number of QC urine samples submitted during the report period represented 1.3% of the total samplesmore » submitted. In addition to the samples provided by IDP, GEL was also required to conduct their own QC program, and submit the results of analyses to IDP. About 33% of the analyses processed by GEL during the third year of this contract were quality control samples. GEL tested the performance of 21 radioisotopes, all of which met or exceeded the specifications in the Statement of Work within statistical uncertainty (Table 4).« less

Results of The Excreta Bioassay Quality Control Program For April 1, 2010 Through March 31, 2011

DOE Office of Scientific and Technical Information (OSTI.GOV)

Antonio, Cheryl L.

2012-07-19

A total of 76 urine samples and 10 spiked fecal samples were submitted during the report period (April 1, 2010 through March 31, 2011) to GEL Laboratories, LLC in South Carolina by the Hanford Internal Dosimetry Program (IDP) to check the accuracy, precision, and detection levels of their analyses. Urine analyses for 14C, Sr, for 238Pu, 239Pu, 241Am, 243Am, 235U, 238U, 238U-mass and fecal analyses for 241Am, 238Pu and 239Pu were tested this year. The number of QC urine samples submitted during the report period represented 1.1% of the total samples submitted. In addition to the samples provided by IDP,more » GEL was also required to conduct their own QC program, and submit the results of analyses to IDP. About 31% of the analyses processed by GEL during the first year of contract 112512 were quality control samples. GEL tested the performance of 23 radioisotopes, all of which met or exceeded the specifications in the Statement of Work within statistical uncertainty except the slightly elevated relative bias for 243,244Cm (Table 4).« less

Hospital quality: a product of good management as much as good treatment.

PubMed

Hyde, Andy; Frafjord, Anders

2013-01-01

In Norway, as in most countries, the demands placed on hospitals to reduce costs and improve the quality of services are intense. Although many say that improving quality reduces costs, few can prove it. Futhermore, how many people can show that improving quality improves patient satisfaction. Diakonhjemmet hospital in Norway has designed and implemented a hospital management system based on lean principles and the PDCA (Plan-Do-Check-Act) quality circle introduced by WE Deming (Deming 2000). The results are quite impressive with improvements in quality and patient satisfaction. The hospital also runs at a profit.

Detection and Analysis of the Quality of Ibuprofen Granules

NASA Astrophysics Data System (ADS)

Yu-bin, Ji; Xin, LI; Guo-song, Xin; Qin-bing, Xue

2017-12-01

The Ibuprofen Granules comprehensive quality testing to ensure that it is in accordance with the provisions of Chinese pharmacopoeia. With reference of Chinese pharmacopoeia, the Ibuprofen Granules is tested by UV, HPLC, in terms of grain size checking, volume deviation, weight loss on drying detection, dissolution rate detection, and quality evaluation. Results indicated that Ibuprofen Granules conform to the standards. The Ibuprofen Granules are qualified and should be permitted to be marketed.

Enhancement of automated blood flow estimates (ENABLE) from arterial spin-labeled MRI.

PubMed

Shirzadi, Zahra; Stefanovic, Bojana; Chappell, Michael A; Ramirez, Joel; Schwindt, Graeme; Masellis, Mario; Black, Sandra E; MacIntosh, Bradley J

2018-03-01

To validate a multiparametric automated algorithm-ENhancement of Automated Blood fLow Estimates (ENABLE)-that identifies useful and poor arterial spin-labeled (ASL) difference images in multiple postlabeling delay (PLD) acquisitions and thereby improve clinical ASL. ENABLE is a sort/check algorithm that uses a linear combination of ASL quality features. ENABLE uses simulations to determine quality weighting factors based on an unconstrained nonlinear optimization. We acquired a set of 6-PLD ASL images with 1.5T or 3.0T systems among 98 healthy elderly and adults with mild cognitive impairment or dementia. We contrasted signal-to-noise ratio (SNR) of cerebral blood flow (CBF) images obtained with ENABLE vs. conventional ASL analysis. In a subgroup, we validated our CBF estimates with single-photon emission computed tomography (SPECT) CBF images. ENABLE produced significantly increased SNR compared to a conventional ASL analysis (Wilcoxon signed-rank test, P < 0.0001). We also found the similarity between ASL and SPECT was greater when using ENABLE vs. conventional ASL analysis (n = 51, Wilcoxon signed-rank test, P < 0.0001) and this similarity was strongly related to ASL SNR (t = 24, P < 0.0001). These findings suggest that ENABLE improves CBF image quality from multiple PLD ASL in dementia cohorts at either 1.5T or 3.0T, achieved by multiparametric quality features that guided postprocessing of dementia ASL. 2 Technical Efficacy: Stage 2 J. Magn. Reson. Imaging 2018;47:647-655. © 2017 International Society for Magnetic Resonance in Medicine.

Validation of analytical methods in GMP: the disposable Fast Read 102® device, an alternative practical approach for cell counting.

PubMed

Gunetti, Monica; Castiglia, Sara; Rustichelli, Deborah; Mareschi, Katia; Sanavio, Fiorella; Muraro, Michela; Signorino, Elena; Castello, Laura; Ferrero, Ivana; Fagioli, Franca

2012-05-31

The quality and safety of advanced therapy products must be maintained throughout their production and quality control cycle to ensure their final use in patients. We validated the cell count method according to the International Conference on Harmonization of Technical Requirements for Registration of Pharmaceuticals for Human Use and European Pharmacopoeia, considering the tests' accuracy, precision, repeatability, linearity and range. As the cell count is a potency test, we checked accuracy, precision, and linearity, according to ICH Q2. Briefly our experimental approach was first to evaluate the accuracy of Fast Read 102® compared to the Bürker chamber. Once the accuracy of the alternative method was demonstrated, we checked the precision and linearity test only using Fast Read 102®. The data were statistically analyzed by average, standard deviation and coefficient of variation percentages inter and intra operator. All the tests performed met the established acceptance criteria of a coefficient of variation of less than ten percent. For the cell count, the precision reached by each operator had a coefficient of variation of less than ten percent (total cells) and under five percent (viable cells). The best range of dilution, to obtain a slope line value very similar to 1, was between 1:8 and 1:128. Our data demonstrated that the Fast Read 102® count method is accurate, precise and ensures the linearity of the results obtained in a range of cell dilution. Under our standard method procedures, this assay may thus be considered a good quality control method for the cell count as a batch release quality control test. Moreover, the Fast Read 102® chamber is a plastic, disposable device that allows a number of samples to be counted in the same chamber. Last but not least, it overcomes the problem of chamber washing after use and so allows a cell count in a clean environment such as that in a Cell Factory. In a good manufacturing practice setting the disposable cell counting devices will allow a single use of the count chamber they can then be thrown away, thus avoiding the waste disposal of vital dye (e.g. Trypan Blue) or lysing solution (e.g. Tuerk solution).

Validation of analytical methods in GMP: the disposable Fast Read 102® device, an alternative practical approach for cell counting

PubMed Central

2012-01-01

Background The quality and safety of advanced therapy products must be maintained throughout their production and quality control cycle to ensure their final use in patients. We validated the cell count method according to the International Conference on Harmonization of Technical Requirements for Registration of Pharmaceuticals for Human Use and European Pharmacopoeia, considering the tests’ accuracy, precision, repeatability, linearity and range. Methods As the cell count is a potency test, we checked accuracy, precision, and linearity, according to ICH Q2. Briefly our experimental approach was first to evaluate the accuracy of Fast Read 102® compared to the Bürker chamber. Once the accuracy of the alternative method was demonstrated, we checked the precision and linearity test only using Fast Read 102®. The data were statistically analyzed by average, standard deviation and coefficient of variation percentages inter and intra operator. Results All the tests performed met the established acceptance criteria of a coefficient of variation of less than ten percent. For the cell count, the precision reached by each operator had a coefficient of variation of less than ten percent (total cells) and under five percent (viable cells). The best range of dilution, to obtain a slope line value very similar to 1, was between 1:8 and 1:128. Conclusions Our data demonstrated that the Fast Read 102® count method is accurate, precise and ensures the linearity of the results obtained in a range of cell dilution. Under our standard method procedures, this assay may thus be considered a good quality control method for the cell count as a batch release quality control test. Moreover, the Fast Read 102® chamber is a plastic, disposable device that allows a number of samples to be counted in the same chamber. Last but not least, it overcomes the problem of chamber washing after use and so allows a cell count in a clean environment such as that in a Cell Factory. In a good manufacturing practice setting the disposable cell counting devices will allow a single use of the count chamber they can then be thrown away, thus avoiding the waste disposal of vital dye (e.g. Trypan Blue) or lysing solution (e.g. Tuerk solution). PMID:22650233

Health Effects of Ozone Pollution

EPA Pesticide Factsheets

Inhaling ozone can cause coughing, shortness of breath, worse asthma or bronchitis symptoms, and irritation and damage to airways.You can reduce your exposure to ozone pollution by checking air quality where you live.

46 CFR 160.176-13 - Approval Tests.

Code of Federal Regulations, 2011 CFR

2011-10-01

... thread count must be at least 400 N (90 lb.). (v) [Reserved] (w) Visual examination. One complete... check the quality of incoming lifejacket components and the production process. Test samples must come...

46 CFR 160.176-13 - Approval Tests.

Code of Federal Regulations, 2013 CFR

2013-10-01

... thread count must be at least 400 N (90 lb.). (v) [Reserved] (w) Visual examination. One complete... check the quality of incoming lifejacket components and the production process. Test samples must come...

46 CFR 160.176-13 - Approval Tests.

Code of Federal Regulations, 2012 CFR

2012-10-01

... thread count must be at least 400 N (90 lb.). (v) [Reserved] (w) Visual examination. One complete... check the quality of incoming lifejacket components and the production process. Test samples must come...

46 CFR 160.176-13 - Approval Tests.

Code of Federal Regulations, 2014 CFR

2014-10-01

... thread count must be at least 400 N (90 lb.). (v) [Reserved] (w) Visual examination. One complete... check the quality of incoming lifejacket components and the production process. Test samples must come...

77 FR 38273 - Science Advisory Board; Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-27

... Administration (NOAA) science programs are of the highest quality and provide optimal support to resource... Environmental Laboratory, 7600 Sand Point Way NE., Seattle, Washington 98115. Please check the SAB Web site http...

The IEO Data Center Management System: Tools for quality control, analysis and access marine data

NASA Astrophysics Data System (ADS)

Casas, Antonia; Garcia, Maria Jesus; Nikouline, Andrei

2010-05-01

Since 1994 the Data Centre of the Spanish Oceanographic Institute develops system for archiving and quality control of oceanographic data. The work started in the frame of the European Marine Science & Technology Programme (MAST) when a consortium of several Mediterranean Data Centres began to work on the MEDATLAS project. Along the years, old software modules for MS DOS were rewritten, improved and migrated to Windows environment. Oceanographic data quality control includes now not only vertical profiles (mainly CTD and bottles observations) but also time series of currents and sea level observations. New powerful routines for analysis and for graphic visualization were added. Data presented originally in ASCII format were organized recently in an open source MySQL database. Nowadays, the IEO, as part of SeaDataNet Infrastructure, has designed and developed a new information system, consistent with the ISO 19115 and SeaDataNet standards, in order to manage the large and diverse marine data and information originated in Spain by different sources, and to interoperate with SeaDataNet. The system works with data stored in ASCII files (MEDATLAS, ODV) as well as data stored within the relational database. The components of the system are: 1.MEDATLAS Format and Quality Control - QCDAMAR: Quality Control of Marine Data. Main set of tools for working with data presented as text files. Includes extended quality control (searching for duplicated cruises and profiles, checking date, position, ship velocity, constant profiles, spikes, density inversion, sounding, acceptable data, impossible regional values,...) and input/output filters. - QCMareas: A set of procedures for the quality control of tide gauge data according to standard international Sea Level Observing System. These procedures include checking for unexpected anomalies in the time series, interpolation, filtering, computation of basic statistics and residuals. 2. DAMAR: A relational data base (MySql) designed to manage the wide variety of marine information as common vocabularies, Catalogues (CSR & EDIOS), Data and Metadata. 3.Other tools for analysis and data management - Import_DB: Script to import data and metadata from the Medatlas ASCII files into the database. - SelDamar/Selavi: interface with the database for local and web access. Allows selective retrievals applying the criteria introduced by the user, as geographical bounds, data responsible, cruises, platform, time periods, etc. Includes also statistical reference values calculation, plotting of original and mean profiles together with vertical interpolation. - ExtractDAMAR: Script to extract data when they are archived in ASCII files that meet the criteria upon an user request through SelDamar interface and export them in ODV format, making also a unit conversion.

Use of satellite remote sensing as a monitoring tool for land and water resources development activities in an Indian tropical site.

PubMed

Behera, M D; Gupta, A K; Barik, S K; Das, P; Panda, R M

2018-06-15

With the availability of satellite data from free data domain, remote sensing has increasingly become a fast-hand tool for monitoring of land and water resources development activities with minimal cost and time. Here, we verified construction of check dams and implementation of plantation activities in two districts of Tripura state using Landsat and Sentinel-2 images for the years 2008 and 2016-2017, respectively. We applied spectral reflectance curves and index-based proxies to quantify these activities for two time periods. A subset of the total check dams and plantation sites was chosen on the basis of site condition, nature of check dams, and planted species for identification on satellite images, and another subset was randomly chosen to validate identification procedure. The normalized difference water index (NDWI) derived from Landsat and Senitnel-2 were used to quantify water area evolved, qualify the water quality, and influence of associated tree shadows. Three types of check dams were observed, i.e., full, partial, and fully soil exposed on the basis of the presence of grass or scrub on the check dams. Based on the nature of check dam and site characteristics, we classified the water bodies under 11-categories using six interpretation keys (size, shape, water depth, quality, shadow of associated trees, catchment area). The check dams constructed on existing narrow gullies totally covered by branches or associated plants were not identified without field verification. Further, use of EVI enabled us to approve the plantation activities and adjudge the corresponding increase in vegetation vigor. The plantation activities were established based on the presence and absence of existing vegetation. Clearing on the plantation sites for plantation shows differential increase in EVI values during the initial years. The 403 plantation sites were categorized into 12 major groups on the basis of presence of dominant species and site conditions. The dominant species were Areca catechu, Musa paradisiaca, Ananas comosus, Bambusa sp., and mix plantation of A. catechu and M. paradisiaca. However, the highest maximum increase in average EVI was observed for the pine apple plantation sites (0.11), followed by Bambussa sp. (0.10). These sites were fully covered with plantation without any exposed soil. The present study successfully demonstrates a satellite-based survey supplemented with ground information evaluating the changes in vegetation profile due to plantation activities, locations of check dams, extent of water bodies, downstream irrigation, and catchment area of water bodies.

Performance characteristics of an automated gas chromatograph-ion trap mass spectrometer system used for the 1995 Southern Oxidants Study field investigation in Nashville, Tennessee

NASA Astrophysics Data System (ADS)

Daughtrey, E. Hunter; Adams, Jeffrey R.; Oliver, Karen D.; Kronmiller, Keith G.; McClenny, William A.

1998-09-01

A trailer-deployed automated gas chromatograph-mass spectrometer (autoGC-MS) system capable of making continuous hourly measurements was used to determine volatile organic compounds (VOCs) in ambient air at New Hendersonville, Tennessee, and Research Triangle Park, North Carolina, in 1995. The system configuration, including the autoGC-MS, trailer and transfer line, siting, and sampling plan and schedule, is described. The autoGC-MS system employs a pair of matched sorbent traps to allow simultaneous sampling and desorption. Desorption is followed by Stirling engine cryofocusing and subsequent GC separation and mass spectral identification and quantification. Quality control measurements described include evaluating precision and accuracy of replicate analyses of independently supplied audit and round-robin canisters and determining the completeness of the data sets taken in Tennessee. Data quality objectives for precision (±10%) and accuracy (±20%) of 10- to 20-ppbv audit canisters and a completeness of >75% data capture were met. Quality assurance measures used in reviewing the data set include retention time stability, calibration checks, frequency distribution checks, and checks of the mass spectra. Special procedures and tests were used to minimize sorbent trap artifacts, to verify the quality of a standard prepared in our laboratory, and to prove the integrity of the insulated, heated transfer line. A rigorous determination of total system blank concentration levels using humidified scientific air spiked with ozone allowed estimation of method detection limits, ranging from 0.01 to 1.0 ppb C, for most of the 100 target compounds, which were a composite list of the target compounds for the Photochemical Assessment Monitoring Station network, those for Environmental Protection Agency method TO-14, and selected oxygenated VOCs.

Exploring Antarctic Land Surface Temperature Extremes Using Condensed Anomaly Databases

NASA Astrophysics Data System (ADS)

Grant, Glenn Edwin

Satellite observations have revolutionized the Earth Sciences and climate studies. However, data and imagery continue to accumulate at an accelerating rate, and efficient tools for data discovery, analysis, and quality checking lag behind. In particular, studies of long-term, continental-scale processes at high spatiotemporal resolutions are especially problematic. The traditional technique of downloading an entire dataset and using customized analysis code is often impractical or consumes too many resources. The Condensate Database Project was envisioned as an alternative method for data exploration and quality checking. The project's premise was that much of the data in any satellite dataset is unneeded and can be eliminated, compacting massive datasets into more manageable sizes. Dataset sizes are further reduced by retaining only anomalous data of high interest. Hosting the resulting "condensed" datasets in high-speed databases enables immediate availability for queries and exploration. Proof of the project's success relied on demonstrating that the anomaly database methods can enhance and accelerate scientific investigations. The hypothesis of this dissertation is that the condensed datasets are effective tools for exploring many scientific questions, spurring further investigations and revealing important information that might otherwise remain undetected. This dissertation uses condensed databases containing 17 years of Antarctic land surface temperature anomalies as its primary data. The study demonstrates the utility of the condensate database methods by discovering new information. In particular, the process revealed critical quality problems in the source satellite data. The results are used as the starting point for four case studies, investigating Antarctic temperature extremes, cloud detection errors, and the teleconnections between Antarctic temperature anomalies and climate indices. The results confirm the hypothesis that the condensate databases are a highly useful tool for Earth Science analyses. Moreover, the quality checking capabilities provide an important method for independent evaluation of dataset veracity.

Principles of continuous quality improvement applied to intravenous therapy.

PubMed

Dunavin, M K; Lane, C; Parker, P E

1994-01-01

Documentation of the application of the principles of continuous quality improvement (CQI) to the health care setting is crucial for understanding the transition from traditional management models to CQI models. A CQI project was designed and implemented by the IV Therapy Department at Lawrence Memorial Hospital to test the application of these principles to intravenous therapy and as a learning tool for the entire organization. Through a prototype inventory project, significant savings in cost and time were demonstrated using check sheets, flow diagrams, control charts, and other statistical tools, as well as using the Plan-Do-Check-Act cycle. As a result, a primary goal, increased time for direct patient care, was achieved. Eight hours per week in nursing time was saved, relationships between two work areas were improved, and $6,000 in personnel costs, storage space, and inventory were saved.

The rate of cis-trans conformation errors is increasing in low-resolution crystal structures.

PubMed

Croll, Tristan Ian

2015-03-01

Cis-peptide bonds (with the exception of X-Pro) are exceedingly rare in native protein structures, yet a check for these is not currently included in the standard workflow for some common crystallography packages nor in the automated quality checks that are applied during submission to the Protein Data Bank. This appears to be leading to a growing rate of inclusion of spurious cis-peptide bonds in low-resolution structures both in absolute terms and as a fraction of solved residues. Most concerningly, it is possible for structures to contain very large numbers (>1%) of spurious cis-peptide bonds while still achieving excellent quality reports from MolProbity, leading to concerns that ignoring such errors is allowing software to overfit maps without producing telltale errors in, for example, the Ramachandran plot.

78 FR 26375 - Food and Drug Administration/International Society for Pharmaceutical Engineering Co-Sponsorship...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-06

... Employee registering $500. prior to/after May13. FDA Planning Committee Members and (free) Fee Waived..., affiliation, mailing address, phone number, fax number, and email address, along with a check or money order...

Who benefit from school doctors' health checks: a prospective study of a screening method.

PubMed

Nikander, Kirsi; Kosola, Silja; Kaila, Minna; Hermanson, Elina

2018-06-27

School health services provide an excellent opportunity for the detection and treatment of children at risk of later health problems. However, the optimal use of school doctors' skills and expertise remains unknown. Furthermore, no validated method for screening children for school doctors' assessments exists. The aims of the study are 1) to evaluate the benefits or harm of school doctors' routine health checks in primary school grades 1 and 5 (at ages 7 and 11) and 2) to explore whether some of the school doctors' routine health checks can be omitted using study questionnaires. This is a prospective, multicenter observational study conducted in four urban municipalities in Southern Finland by comparing the need for a school doctor's assessment to the benefit gained from it. We will recruit a random sample of 1050 children from 21 schools from primary school grades 1 and 5. Before the school doctor's health check, parents, nurses and teachers fill a study questionnaire to identify any potential concerns about each child. Doctors, blinded to the questionnaire responses, complete an electronic report after the appointment, including given instructions and follow-up plans. The child, parent, doctor and researchers assess the benefit of the health check. The researchers compare the need for a doctor's appointment to the benefit gained from it. At one year after the health check, we will analyze the implementation of the doctors' interventions and follow-up plans. The study will increase our knowledge of the benefits of school doctors' routine health checks and assess the developed screening method. We hypothesize that targeting the health checks to the children in greatest need would increase the quality of school health services. ClinicalTrials.gov Identifier: NCT03178331 , date of registration June 6 th 2017.

EC97-44354-2

NASA Image and Video Library

1997-12-16

An image of the F-16XL #1 during its functional flight check of the Digital Flight Control System (DFCS) on December 16, 1997. The mission was flown by NASA research pilot Dana Purifoy, and lasted 1 hour and 25 minutes. The tests included pilot familiarly, functional check, and handling qualities evaluation maneuvers to a speed of Mach 0.6 and 300 knots. Purifoy completed all the briefed data points with no problems, and reported that the DFCS handled as well, if not better than the analog computer system that it replaced.

Model Checking Verification and Validation at JPL and the NASA Fairmont IV and V Facility

NASA Technical Reports Server (NTRS)

Schneider, Frank; Easterbrook, Steve; Callahan, Jack; Montgomery, Todd

1999-01-01

We show how a technology transfer effort was carried out. The successful use of model checking on a pilot JPL flight project demonstrates the usefulness and the efficacy of the approach. The pilot project was used to model a complex spacecraft controller. Software design and implementation validation were carried out successfully. To suggest future applications we also show how the implementation validation step can be automated. The effort was followed by the formal introduction of the modeling technique as a part of the JPL Quality Assurance process.

KSC00pp1420

NASA Image and Video Library

2000-09-16

In Orbiter Processing Facility bay 2 during a Crew Equipment Interface Test (CEIT), STS-97 Pilot Michael Bloomfied (left) and Commander Brent Jett (right) check out the cockpit of orbiter Endeavour as part of preflight preparations. The CEIT provides an opportunity for crew members to check equipment and facilities that will be on board the orbiter during their mission. The STS-97 mission will be the sixth construction flight to the International Space Station. The payload includes a photovoltaic (PV) module, providing solar power to the Station. STS-97 is scheduled to launch Nov. 30 from KSC for the 10-day mission

KSC-00pp1420

NASA Image and Video Library

2000-09-16

In Orbiter Processing Facility bay 2 during a Crew Equipment Interface Test (CEIT), STS-97 Pilot Michael Bloomfied (left) and Commander Brent Jett (right) check out the cockpit of orbiter Endeavour as part of preflight preparations. The CEIT provides an opportunity for crew members to check equipment and facilities that will be on board the orbiter during their mission. The STS-97 mission will be the sixth construction flight to the International Space Station. The payload includes a photovoltaic (PV) module, providing solar power to the Station. STS-97 is scheduled to launch Nov. 30 from KSC for the 10-day mission

KSC00pp1421

NASA Image and Video Library

2000-09-16

In Orbiter Processing Facility bay 2 during a Crew Equipment Interface Test (CEIT), STS-97 Commander Brent Jett (left) and Pilot Michael Bloomfied (right) check out the cockpit of orbiter Endeavour as part of preflight preparations. The CEIT provides an opportunity for crew members to check equipment and facilities that will be on board the orbiter during their mission. The STS-97 mission will be the sixth construction flight to the International Space Station. The payload includes a photovoltaic (PV) module, providing solar power to the Station. STS-97 is scheduled to launch Nov. 30 from KSC for the 10-day mission

KSC00pp1422

NASA Image and Video Library

2000-09-16

During a Crew Equipment Interface Test (CEIT), STS-97 Commander Brent Jett (left) and Pilot Michael Bloomfied (right) check out the cockpit of orbiter Endeavour in Orbiter Processing Facility bay 2 as part of preflight preparations. The CEIT provides an opportunity for crew members to check equipment and facilities that will be on board the orbiter during their mission. The STS-97 mission will be the sixth construction flight to the International Space Station. The payload includes a photovoltaic (PV) module, providing solar power to the Station. STS-97 is scheduled to launch Nov. 30 from KSC for the 10-day mission

KSC-00pp1422

NASA Image and Video Library

2000-09-16

During a Crew Equipment Interface Test (CEIT), STS-97 Commander Brent Jett (left) and Pilot Michael Bloomfied (right) check out the cockpit of orbiter Endeavour in Orbiter Processing Facility bay 2 as part of preflight preparations. The CEIT provides an opportunity for crew members to check equipment and facilities that will be on board the orbiter during their mission. The STS-97 mission will be the sixth construction flight to the International Space Station. The payload includes a photovoltaic (PV) module, providing solar power to the Station. STS-97 is scheduled to launch Nov. 30 from KSC for the 10-day mission

KSC-00pp1421

NASA Image and Video Library

2000-09-16

In Orbiter Processing Facility bay 2 during a Crew Equipment Interface Test (CEIT), STS-97 Commander Brent Jett (left) and Pilot Michael Bloomfied (right) check out the cockpit of orbiter Endeavour as part of preflight preparations. The CEIT provides an opportunity for crew members to check equipment and facilities that will be on board the orbiter during their mission. The STS-97 mission will be the sixth construction flight to the International Space Station. The payload includes a photovoltaic (PV) module, providing solar power to the Station. STS-97 is scheduled to launch Nov. 30 from KSC for the 10-day mission

STS-97 Mission Specialist Garneau with full launch and entry suit during pre-pack and fit check

NASA Technical Reports Server (NTRS)

2000-01-01

During pre-pack and fit check in the Operations and Checkout Building, STS-97 Commander Brent Jett gets help with his gloves from suit technician Bill Todd. Mission STS-97 is the sixth construction flight to the International Space Station. Its payload includes the P6 Integrated Truss Structure and a photovoltaic (PV) module, with giant solar arrays that will provide power to the Station. The mission includes two spacewalks to complete the solar array connections. STS-97 is scheduled to launch Nov. 30 at about 10:06 p.m. EST.

STS-97 Mission Specialist Garneau during pre-pack and fit check

NASA Technical Reports Server (NTRS)

2000-01-01

STS-97 Mission Specialist Marc Garneau gets help with his boots from suit technician Tommy McDonald during pre-pack and fit check. Garneau is with the Canadian Space Agency. Mission STS-97 is the sixth construction flight to the International Space Station. Its payload includes the P6 Integrated Truss Structure and a photovoltaic (PV) module, with giant solar arrays that will provide power to the Station. The mission includes two spacewalks to complete the solar array connections. STS-97 is scheduled to launch Nov. 30 at about 10:06 p.m. EST.

STS-104 Crew Training of Jim Reilly in EMU fit check

NASA Image and Video Library

2001-04-09

JSC2001-E-11704 (9 April 2001) --- Astronaut James F. Reilly, STS-104 mission specialist, participates in an Extravehicular Mobility Unit (EMU) fit check in one of the chambers in the Crew Systems Laboratory at the Johnson Space Center (JSC). Standing near the doorway are Peggy Berg and Dave Simon, Crew Personnel Representatives (CPR), from the Mission Operations Directorate (MOD) at the Johnson Space Center. The STS-104 mission to the International Space Station (ISS) represents the Space Shuttle Atlantis' first flight using a new engine and is targeted for a liftoff no earlier than June 14, 2001.

The Z1 truss is placed in stand to check weight and balance

NASA Technical Reports Server (NTRS)

2000-01-01

In the Space Station Processing Facility, the Integrated Truss Structure Z1 rests in the workstand to check its weight and balance. The Z1 truss is the first of 10 trusses that will become the backbone of the International Space Station, eventually stretching the length of a football field. Along with its companion payload, the third Pressurized Mating Adapter, the Z1 is scheduled to be launched aboard Space Shuttle Discovery Oct. 5 at 9:38 p.m. EDT. The launch will be the 100th in the Shuttle program.

The Z1 truss is lowered to stand to check weight and balance

NASA Technical Reports Server (NTRS)

2000-01-01

In the Space Station Processing Facility, an overhead crane lowers the Integrated Truss Structure Z1 onto a workstand to check its weight and balance. The Z1 truss is the first of 10 trusses that will become the backbone of the International Space Station, eventually stretching the length of a football field. Along with its companion payload, the third Pressurized Mating Adapter, the Z1 is scheduled to be launched aboard Space Shuttle Discovery Oct. 5 at 9:38 p.m. EDT. The launch will be the 100th in the Shuttle program.

The Z1 truss is moved to check weight and balance

NASA Technical Reports Server (NTRS)

2000-01-01

In the Space Station Processing Facility, the Integrated Truss Structure Z1, an element of the International Space Station, is moved to another stand to check its weight and balance. The Z1 truss is the first of 10 trusses that will become the backbone of the Space Station, eventually stretching the length of a football field. Along with its companion payload, the third Pressurized Mating Adapter, the Z1 is scheduled to be launched aboard Space Shuttle Discovery Oct. 5 at 9:38 p.m. EDT. The launch will be the 100th in the Shuttle program.

The Z1 truss is moved to check weight and balance

NASA Technical Reports Server (NTRS)

2000-01-01

In the Space Station Processing Facility, the Integrated Truss Structure Z1, an element of the International Space Station, is lifted for moving to another stand to check its weight and balance. The Z1 truss is the first of 10 trusses that will become the backbone of the Space Station, eventually stretching the length of a football field. Along with its companion payload, the third Pressurized Mating Adapter, the Z1 is scheduled to be launched aboard Space Shuttle Discovery Oct. 5 at 9:38 p.m. EDT. The launch will be the 100th in the Shuttle program.

Consumer Mobile Apps for Potential Drug-Drug Interaction Check: Systematic Review and Content Analysis Using the Mobile App Rating Scale (MARS).

PubMed

Kim, Ben Yb; Sharafoddini, Anis; Tran, Nam; Wen, Emily Y; Lee, Joon

2018-03-28

General consumers can now easily access drug information and quickly check for potential drug-drug interactions (PDDIs) through mobile health (mHealth) apps. With aging population in Canada, more people have chronic diseases and comorbidities leading to increasing numbers of medications. The use of mHealth apps for checking PDDIs can be helpful in ensuring patient safety and empowerment. The aim of this study was to review the characteristics and quality of publicly available mHealth apps that check for PDDIs. Apple App Store and Google Play were searched to identify apps with PDDI functionality. The apps' general and feature characteristics were extracted. The Mobile App Rating Scale (MARS) was used to assess the quality. A total of 23 apps were included for the review-12 from Apple App Store and 11 from Google Play. Only 5 of these were paid apps, with an average price of $7.19 CAD. The mean MARS score was 3.23 out of 5 (interquartile range 1.34). The mean MARS scores for the apps from Google Play and Apple App Store were not statistically different (P=.84). The information dimension was associated with the highest score (3.63), whereas the engagement dimension resulted in the lowest score (2.75). The total number of features per app, average rating, and price were significantly associated with the total MARS score. Some apps provided accurate and comprehensive information about potential adverse drug effects from PDDIs. Given the potentially severe consequences of incorrect drug information, there is a need for oversight to eliminate low quality and potentially harmful apps. Because managing PDDIs is complex in the absence of complete information, secondary features such as medication reminder, refill reminder, medication history tracking, and pill identification could help enhance the effectiveness of PDDI apps. ©Ben YB Kim, Anis Sharafoddini, Nam Tran, Emily Y Wen, Joon Lee. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 28.03.2018.

Consumer Mobile Apps for Potential Drug-Drug Interaction Check: Systematic Review and Content Analysis Using the Mobile App Rating Scale (MARS)

PubMed Central

Kim, Ben YB; Sharafoddini, Anis; Tran, Nam; Wen, Emily Y

2018-01-01

Background General consumers can now easily access drug information and quickly check for potential drug-drug interactions (PDDIs) through mobile health (mHealth) apps. With aging population in Canada, more people have chronic diseases and comorbidities leading to increasing numbers of medications. The use of mHealth apps for checking PDDIs can be helpful in ensuring patient safety and empowerment. Objective The aim of this study was to review the characteristics and quality of publicly available mHealth apps that check for PDDIs. Methods Apple App Store and Google Play were searched to identify apps with PDDI functionality. The apps’ general and feature characteristics were extracted. The Mobile App Rating Scale (MARS) was used to assess the quality. Results A total of 23 apps were included for the review—12 from Apple App Store and 11 from Google Play. Only 5 of these were paid apps, with an average price of $7.19 CAD. The mean MARS score was 3.23 out of 5 (interquartile range 1.34). The mean MARS scores for the apps from Google Play and Apple App Store were not statistically different (P=.84). The information dimension was associated with the highest score (3.63), whereas the engagement dimension resulted in the lowest score (2.75). The total number of features per app, average rating, and price were significantly associated with the total MARS score. Conclusions Some apps provided accurate and comprehensive information about potential adverse drug effects from PDDIs. Given the potentially severe consequences of incorrect drug information, there is a need for oversight to eliminate low quality and potentially harmful apps. Because managing PDDIs is complex in the absence of complete information, secondary features such as medication reminder, refill reminder, medication history tracking, and pill identification could help enhance the effectiveness of PDDI apps. PMID:29592848

40 CFR Appendix B to Part 75 - Quality Assurance and Quality Control Procedures

Code of Federal Regulations, 2010 CFR

2010-07-01

... in section 2.3 of this appendix and the Hg emission tests described in §§ 75.81(c) and 75.81(d)(4). 1.2Specific Requirements for Continuous Emissions Monitoring Systems 1.2.1Calibration Error Test and Linearity Check Procedures Keep a written record of the procedures used for daily calibration error tests and...

Basal Area Growth Estimators for Survivor Component: A Quality Control Application

Treesearch

Charles E. Thomas; Francis A. Roesch

1990-01-01

Several possible estimators are available for basal area growth of survivor trees, when horizontal prism (or point) plots (HPP) are remeasured. This study's comparison of three estimators not only provides a check for the estimate of basal area growth but suggests that they can provide a quality control indicator for yield procedures. An example is derived from...

Methods developed to elucidate nursing related adverse events in Japan.

PubMed

Yamagishi, Manaho; Kanda, Katsuya; Takemura, Yukie

2003-05-01

Financial resources for quality assurance in Japanese hospitals are limited and few hospitals have quality monitoring systems of nursing service systems. However, recently its necessity has been recognized. This study has cost effectively used adverse event occurrence rates as indicators of the quality of nursing service, and audited methods of collecting data on adverse events to elucidate their approximate true numbers. Data collection was conducted in July, August and November 2000 at a hospital in Tokyo that administered both primary and secondary health care services (281 beds, six wards, average length of stay 23 days). We collected adverse events through incident reports, logs, check-lists, nurse interviews, medication error questionnaires, urine leucocyte tests, patient interviews and medical records. Adverse events included the unplanned removals of invasive lines, medication errors, falls, pressure sores, skin deficiencies, physical restraints, and nosocomial infections. After evaluating the time and useful outcomes of each source, it soon became clear that we could elucidate adverse events most consistently and cost-effectively through incident reports, check lists, nurse interviews, urine leucocyte tests and medication error questionnaires. This study suggests that many hospitals in Japan could monitor the quality of the nursing service using these sources.

A New Quality Control Method base on IRMCD for Wind Profiler Observation towards Future Assimilation Application

NASA Astrophysics Data System (ADS)

Chen, Min; Zhang, Yu

2017-04-01

A wind profiler network with a total of 65 profiling radars was operated by the MOC/CMA in China until July 2015. In this study, a quality control procedure is constructed to incorporate the profiler data from the wind-profiling network into the local data assimilation and forecasting system (BJRUC). The procedure applies a blacklisting check that removes stations with gross errors and an outlier check that rejects data with large deviations from the background. Instead of the bi-weighting method, which has been commonly implemented in outlier elimination for one-dimensional scalar observations, an outlier elimination method is developed based on the iterated reweighted minimum covariance determinant (IRMCD) for multi-variate observations such as wind profiler data. A quality control experiment is separately performed for subsets containing profiler data tagged in parallel with/without rain flags at every 00UTC/12UTC from 20 June to 30 Sep 2015. From the results, we find that with the quality control, the frequency distributions of the differences between the observations and model background become more Gaussian-like and meet the requirements of a Gaussian distribution for data assimilation. Further intensive assessment for each quality control step reveals that the stations rejected by blacklisting contain poor data quality, and the IRMCD rejects outliers in a robust and physically reasonable manner.

Unbiased analysis of geomagnetic data sets and comparison of historical data with paleomagnetic and archeomagnetic records

NASA Astrophysics Data System (ADS)

Arneitz, Patrick; Egli, Ramon; Leonhardt, Roman

2017-03-01

Reconstructions of the past geomagnetic field provide fundamental constraints for understanding the dynamics of the Earth's interior, as well as serving as basis for magnetostratigraphic and archeomagnetic dating tools. Such reconstructions, when extending over epochs that precede the advent of instrumental measurements, rely exclusively on magnetic records from archeological artifacts, and, further in the past, from rocks and sediments. The most critical component of such indirect records is field intensity because of possible biases introduced by material properties and by laboratory protocols, which do not reproduce exactly the original field recording conditions. Large biases are usually avoided by the use of appropriate checking procedures; however, smaller ones can remain undetected in individual studies and might significantly affect field reconstructions. We introduce a new general approach for analyzing geomagnetic databases in order to investigate the reliability of indirect records. This approach is based on the comparison of historical records with archeomagnetic and volcanic data, considering temporal and spatial mismatches with adequate weighting functions and error estimation. A good overall agreement is found between indirect records and historical measurements, while for several subsets systematic bias is detected (e.g., inclination shallowing of lava records). We also demonstrate that simple approaches to analyzing highly inhomogeneous and internally correlated paleomagnetic data sets can lead to incorrect conclusions about the efficiency of quality checks and corrections. Consistent criteria for selecting and weighting data are presented in this review and can be used to improve current geomagnetic field modeling techniques.

National Contaminant Occurrence Database (NCOD)

EPA Pesticide Factsheets

This site describes water sample analytical data that EPA is currently using and has used in the past for analysis, rulemaking, and rule evaluation. The data have been checked for data quality and analyzed for national representativeness.

Assessment of Petrological Microscopes.

ERIC Educational Resources Information Center

Mathison, Charter Innes

1990-01-01

Presented is a set of procedures designed to check the design, ergonomics, illumination, function, optics, accessory equipment, and image quality of a microscope being considered for purchase. Functions for use in a petrology or mineralogy laboratory are stressed. (CW)

WIM data analyst's manual

DOT National Transportation Integrated Search

2010-06-01

This manual provides information and recommended procedures to be utilized by an agencys Weigh-in-Motion (WIM) Office Data Analyst to perform validation and quality control (QC) checks of WIM traffic data. This manual focuses on data generated by ...

Distress | Springboard Beyond Cancer

Cancer.gov

Distress may affect your ability to cope with a cancer diagnosis or treatment. It may cause you to miss check-ups or delay treatment. Even mild distress can affect the quality of life for you and your caregivers.

[ISO 9001:2015 Certification in Quality Management].

PubMed

Enders, Christian; Lang, Gabriele E; Lang, Gerhard K; Werner, Jens Ulrich

2017-07-01

Quality management improves the structures, processes and results of organizations of all kinds. Many practices and clinics have their existing quality management system certified according to ISO 9001, (e.g., to check their own quality management system or to obtain a testimonial against third parties). The latest version ISO 9001:2015 contains some changes, both structurally and in terms of content. These changes can be met with reasonable efforts. An ISO 9001:2015 certification represents a value for your organization, but these advantages are often not directly measurable. Georg Thieme Verlag KG Stuttgart · New York.

Impact of integrated upper limb spasticity management including botulinum toxin A on patient-centred goal attainment: rationale and protocol for an international prospective, longitudinal cohort study (ULIS-III)

PubMed Central

Turner-Stokes, Lynne; Ashford, Stephen; Jacinto, Jorge; Maisonobe, Pascal; Balcaitiene, Jovita; Fheodoroff, Klemens

2016-01-01

Objectives Describe the rationale and protocol for the Upper Limb International Spasticity (ULIS)-III study, which aims to evaluate the impact of integrated spasticity management, involving multiple botulinum toxin A (BoNT-A) injection cycles and concomitant therapies, on patient-centred goal attainment. Outline novel outcome assessment methods for ULIS-III and report initial evaluation data from goal setting in early stages of the study. Design Large international longitudinal cohort study of integrated upper limb spasticity management, including BoNT-A. Participants and setting ULIS-III is a 2-year study expected to enrol >1000 participants at 58 study centres across 14 countries. Interventions The study design is non-interventional and intended to reflect real-life clinical practice. It will describe injection practices and additional treatment strategies, and record clinical decision-making in a serial approach to long-term spasticity management. Outcome measures ULIS-III will use a goal-directed approach to selection of targeted standardised measures to capture the diversity of presentation, goals and outcomes. ULIS-III will implement the Upper Limb Spasticity Index, a battery of assessments including a structured approach to goal attainment scaling (Goal Attainment Scaling—Evaluation of Outcomes for Upper Limb Spasticity tool), alongside a limited set of standardised measures, chosen according to patients' selected goal areas. Concomitant therapy inputs, patient satisfaction with engagement in goal setting, health economic end points and health-related quality of life data will also be captured. Results of initial evaluation of goal quality Recruitment started in January 2015. By June 2015, 58 sites had been identified and initial data collected for 79 patients across 13 sites in 3 countries. Goal setting data were quality-checked and centres rated on the basis of function-related and Specific, Measurable, Achievable, Realistic, Timed (SMART) characteristics of goal statements. Overall, 11/13 centres achieved the highest rating (A++). Conclusions ULIS-III will provide valuable information regarding treatment of and outcomes from real-life upper limb spasticity management worldwide. Trial registration number NCT02454803; Pre-results. PMID:27315835

Lonchakov checks the Rasteniya-2 plant growth experiment in the SM during Expedition Five

NASA Image and Video Library

2002-11-08

ISS005-E-20309 (8 November 2002) --- Soyuz 5 Flight Engineer Yuri V. Lonchakov looks at a plant growth experiment in the Zvezda Service Module on the International Space Station (ISS). Lonchakov represents Rosaviakosmos.

40 CFR 86.117-96 - Evaporative emission enclosure calibrations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... and periodic determination of enclosure background emissions (hydrocarbons and methanol); initial determination of enclosure internal volume; and periodic hydrocarbon and methanol retention check and calibration. Methanol measurements may be omitted if methanol-fueled vehicles will not be tested in the...

40 CFR 86.117-96 - Evaporative emission enclosure calibrations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... and periodic determination of enclosure background emissions (hydrocarbons and methanol); initial determination of enclosure internal volume; and periodic hydrocarbon and methanol retention check and calibration. Methanol measurements may be omitted if methanol-fueled vehicles will not be tested in the...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, J; Hu, W; Chen, X

Purpose: The aim of this study is to investigate the feasibility of using RapidPlan for breast cancer radiotherapy and to evaluate its performance for planners with different planning experiences. Methods: A training database was collected with 80 expert plan datasets from patients previously received left breast conserving surgery and IMRT-simultaneously integrated boost radiotherapy. The models were created on the RapidPlan. Five patients from the training database and 5 external patients were used for internal and external validation, respectively. Three planners with different planning experiences (beginner, junior, senior) designed manual and RapidPlan based plans for additional ten patients. The plan qualitiesmore » were compared with manual and RapidPlan based ones. Results: For the internal and external validations, there were no significant dose differences on target coverage for plans from RapidPlan and manual. Also, no difference was found in the mean doses to contralateral breast and lung. The RapidPlan improved the heart (V5, V10, V20, V30, and mead dose) and ipsilateral lung (V5, V10, V20, V30, and mean dose) sparing for the beginner and junior planners. Compare to the plans from senior planner, 6 out of 16 clinically checked parameters were improved in RapidPlan, and the left parameters were similar. Conclusion: It is feasible to generate clinical acceptable plans using RapidPlan for breast cancer radiotherapy. The RapidPlan helps to systematically improve the quality of IMRT plans against the benchmark of clinically accepted plans. The RapidPlan shows promise for homogenizing plan quality by transferring planning expertise from more experienced to less experienced planners.« less

Data Quality Control of the French Permanent Broadband Network in the RESIF Framework

NASA Astrophysics Data System (ADS)

Grunberg, Marc; Lambotte, Sophie; Engels, Fabien; Dretzen, Remi; Hernandez, Alain

2014-05-01

In the framework of the RESIF (Réseau Sismologique et géodésique Français) project, a new information system is being setting up, allowing the improvement of the management and the distribution of high quality data from the different elements of RESIF and the associated networks. Within this information system, EOST (in Strasbourg) is in charge of collecting real-time permanent broadband seismic waveform, and performing Quality Control on these data. The real-time and validated data set are pushed to the French National Distribution Center (Isterre/Grenoble) in order to make them publicly available. Furthermore EOST hosts the BCSF-ReNaSS, in charge of the French metropolitan seismic bulletin. This allows to benefit from some high-end quality control based on the national and world-wide seismicity. Here we present first the real-time seismic data flow from the stations of the French National Broad Band Network to EOST, and then, the data Quality Control procedures that were recently installed, including some new developments. The data Quality Control consists in applying a variety of subprocesses to check the consistency of the whole system and process from the stations to the data center. This allows us to verify that instruments and data transmission are operating correctly. Moreover analysis of the ambient noise helps to characterize intrinsic seismic quality of the stations and to identify other kind of disturbances. The deployed Quality Control consist in a pipeline that starts with low-level procedures : check the real-time miniseed data file (file naming convention, data integrity), check for inconsistencies between waveform and meta-data (channel name, sample rate, etc.), compute waveform statistics (data availability, gap/overlap, mean, rms, time quality, spike). It is followed by some high-level procedures such as : power spectral density computation (PSD), STA/LTA computation to be correlated to the seismicity, phases picking and stations magnitudes discrepancies. The results of quality control is visualized through a web interface. This latter gathers data from different information systems to provide a global view on last events that could impact the data (like intervention on site or seismic events, etc.). This work is still an ongoing project. We intend to add more sophisticated procedures to enhanced our data Quality Control. Among them, we will deploy a seismic moment tensor inversion tool for amplitude, time and polarity control and a noise correlation procedure for time drift detections.

Technician checks the mirrors of the Starshine-2 experiment

NASA Technical Reports Server (NTRS)

2001-01-01

Technician checks the mirrors of the Starshine-2 experiment KSC-01PD-1715 KENNEDY SPACE CENTER, Fla. -- A technician checks the mirrors on the Starshine-2 experiment inside a canister in the payload bay of Space Shuttle Endeavour. The deployable experiment is being carried on mission STS-108. Starshine-2's 800 aluminum mirrors were polished by more than 25,000 students from 26 countries. Top priorities for the STS-108 (UF-1) mission of Endeavour are rotation of the International Space Station Expedition Three and Expedition Four crews, bringing water, equipment and supplies to the station in the Multi-Purpose Logistics Module Raffaello, and completion of robotics tasks and a spacewalk to install thermal blankets over two pieces of equipment at the bases of the Space Station's solar wings. Liftoff of Endeavour on mission STS-108 is scheduled for 7:41 p.m. EST.

The Relationship Between Focused Attention Meditation Practice Habits, Psychological Symptoms, and Quality of Life.

PubMed

Bilican, F Isil

2016-12-01

This study examined the relationship between focused attention meditation practice habits, psychological symptoms, and quality of life. The participants were 30 adults from New York, NY, practicing Ananda Marga spirituality. They were administered the Symptom Check List-90-R and the Quality of Life Index. The findings pointed out while Ananda Marga meditation practice habits were not associated with improvements in psychological symptoms, longer years in meditation practice was associated with improvements in overall, social and psychological/spiritual quality of life. Longer periods of meditation practice per session were related to lower levels of overall quality of life and economic quality of life.

Application of reiteration of Hankel singular value decomposition in quality control

NASA Astrophysics Data System (ADS)

Staniszewski, Michał; Skorupa, Agnieszka; Boguszewicz, Łukasz; Michalczuk, Agnieszka; Wereszczyński, Kamil; Wicher, Magdalena; Konopka, Marek; Sokół, Maria; Polański, Andrzej

2017-07-01

Medical centres are obliged to store past medical records, including the results of quality assurance (QA) tests of the medical equipment, which is especially useful in checking reproducibility of medical devices and procedures. Analysis of multivariate time series is an important part of quality control of NMR data. In this work we proposean anomaly detection tool based on Reiteration of Hankel Singular Value Decomposition method. The presented method was compared with external software and authors obtained comparable results.

[Quality control in herbal supplements].

PubMed

Oelker, Luisa

2005-01-01

Quality and safety of food and herbal supplements are the result of a whole of different elements as good manufacturing practice and process control. The process control must be active and able to individuate and correct all possible hazards. The main and most utilized instrument is the hazard analysis critical control point (HACCP) system the correct application of which can guarantee the safety of the product. Herbal supplements need, in addition to standard quality control, a set of checks to assure the harmlessness and safety of the plants used.

The Method of Manufacturing Nonmetallic Test-Blocks on Different Sensitivity Classes

NASA Astrophysics Data System (ADS)

Kalinichenko, N. P.; Kalinichenko, A. N.; Lobanova, I. S.; Zaitseva, A. A.; Loboda, E. L.

2016-01-01

Nowadays in our modern world there is a vital question of quality control of details made from nonmetallic materials due to their wide spreading. Nondestructive penetrant testing is effective, and in some cases it is the only possible method of accidents prevention at high- risk sites. A brief review of check sample necessary for quality evaluation of penetrant materials is considered. There was offered a way of making agents for quality of penetrant materials testing according to different liquid penetrant testing sensibility classes.

EC02-0264-19

NASA Image and Video Library

2002-11-15

How differential deflection of the inboard and outboard leading-edge flaps affected the handling qualities of this modified F/A-18A was evaluated during the first check flight in the Active Aeroelastic Wing program at NASA's Dryden Flight Research Center.

[Quality control of laser imagers].

PubMed

Winkelbauer, F; Ammann, M; Gerstner, N; Imhof, H

1992-11-01

Multiformat imagers based on laser systems are used for documentation in an increasing number of investigations. The specific problems of quality control are explained and the persistence of film processing in these imager systems of different configuration with (Machine 1: 3M-Laser-Imager-Plus M952 with connected 3M Film-Processor, 3M-Film IRB, X-Rax Chemical Mixer 3M-XPM, 3M-Developer and Fixer) or without (Machine 2: 3M-Laser-Imager-Plus M952 with separate DuPont-Cronex Film-processor, Kodak IR-Film, Kodak Automixer, Kodak-Developer and Fixer) connected film processing unit are investigated. In our checking based on DIN 6868 and ONORM S 5240 we found persistence of film processing in the equipment with directly adapted film processing unit according to DIN and ONORM. The checking of film persistence as demanded by DIN 6868 in these equipment could therefore be performed in longer periods. Systems with conventional darkroom processing comparatively show plain increased fluctuation, and hence the demanded daily control is essential to guarantee appropriate reaction and constant quality of documentation.

System-level change in mental health services in North Wales: An observational study using systems thinking.

PubMed

Evans, S; Huxley, P J; Maxwell, N; Huxley, K L S

2014-06-01

To describe changes to mental health services using systems thinking. Structured standardized quality of life assessment (Manchester Short Quality of Life Assessment: MANSA) was used to establish service user priorities for changes to service provision (part of a process known as check in systems thinking). Current service performance in these priority areas was identified, and changes to service arrangements were planned, implemented and monitored by task and finish (T&F) groups (making use of a process known as flow in systems thinking). 81 MANSA assessments were completed at the check stage (by NM). Work finances and leisure activities emerged as service user priority areas for change, and T&F groups were established with representation of all sectors and service users. Ways to make improvements were observed, planned and implemented by T&F groups (the flow stage). The systems approach reveals how services and quality of life have been changed for patients in Wrexham. Further generalizable research is needed into the potential benefits of using systems thinking in mental health service evaluation. © The Author(s) 2013.

AutoLock: a semiautomated system for radiotherapy treatment plan quality control

PubMed Central

Lowe, Matthew; Hardy, Mark J.; Boylan, Christopher J.; Whitehurst, Philip; Rowbottom, Carl G.

2015-01-01

A semiautomated system for radiotherapy treatment plan quality control (QC), named AutoLock, is presented. AutoLock is designed to augment treatment plan QC by automatically checking aspects of treatment plans that are well suited to computational evaluation, whilst summarizing more subjective aspects in the form of a checklist. The treatment plan must pass all automated checks and all checklist items must be acknowledged by the planner as correct before the plan is finalized. Thus AutoLock uniquely integrates automated treatment plan QC, an electronic checklist, and plan finalization. In addition to reducing the potential for the propagation of errors, the integration of AutoLock into the plan finalization workflow has improved efficiency at our center. Detailed audit data are presented, demonstrating that the treatment plan QC rejection rate fell by around a third following the clinical introduction of AutoLock. PACS number: 87.55.Qr PMID:26103498

AutoLock: a semiautomated system for radiotherapy treatment plan quality control.

PubMed

Dewhurst, Joseph M; Lowe, Matthew; Hardy, Mark J; Boylan, Christopher J; Whitehurst, Philip; Rowbottom, Carl G

2015-05-08

A semiautomated system for radiotherapy treatment plan quality control (QC), named AutoLock, is presented. AutoLock is designed to augment treatment plan QC by automatically checking aspects of treatment plans that are well suited to computational evaluation, whilst summarizing more subjective aspects in the form of a checklist. The treatment plan must pass all automated checks and all checklist items must be acknowledged by the planner as correct before the plan is finalized. Thus AutoLock uniquely integrates automated treatment plan QC, an electronic checklist, and plan finalization. In addition to reducing the potential for the propagation of errors, the integration of AutoLock into the plan finalization workflow has improved efficiency at our center. Detailed audit data are presented, demonstrating that the treatment plan QC rejection rate fell by around a third following the clinical introduction of AutoLock.

Beating Back Bacteria

NASA Technical Reports Server (NTRS)

1998-01-01

Under a NASA-Johnson Space Center contract, Umpqua Research developed the MCV (Trademark) (Microbial Check Valve) which uses iodinated ion exchange resin used for water purification systems aboard space missions. Using this resin, MRLB International, Inc., developed and commercialized the Dentapure purification cartridge used by dentists nationwide.

iss028e034854

NASA Image and Video Library

2011-08-31

ISS028-E-034854 (31 Aug. 2011) --- Russian cosmonaut Sergei Volkov, Expedition 28 flight engineer, checks the progress of a new growth experiment on the BIO-5 Rasteniya-2 (Plants-2) payload with its LADA-01 greenhouse in the Zvezda Service Module of the International Space Station.

Design of experiments enhanced statistical process control for wind tunnel check standard testing

NASA Astrophysics Data System (ADS)

Phillips, Ben D.

The current wind tunnel check standard testing program at NASA Langley Research Center is focused on increasing data quality, uncertainty quantification and overall control and improvement of wind tunnel measurement processes. The statistical process control (SPC) methodology employed in the check standard testing program allows for the tracking of variations in measurements over time as well as an overall assessment of facility health. While the SPC approach can and does provide researchers with valuable information, it has certain limitations in the areas of process improvement and uncertainty quantification. It is thought by utilizing design of experiments methodology in conjunction with the current SPC practices that one can efficiently and more robustly characterize uncertainties and develop enhanced process improvement procedures. In this research, methodologies were developed to generate regression models for wind tunnel calibration coefficients, balance force coefficients and wind tunnel flow angularities. The coefficients of these regression models were then tracked in statistical process control charts, giving a higher level of understanding of the processes. The methodology outlined is sufficiently generic such that this research can be applicable to any wind tunnel check standard testing program.

NDA BATCH 2002-02

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lawrence Livermore National Laboratory

2009-12-09

QC sample results (daily background checks, 20-gram and 100-gram SGS drum checks) were within acceptable criteria established by WIPP's Quality Assurance Objectives for TRU Waste Characterization. Replicate runs were performed on 5 drums with IDs LL85101099TRU, LL85801147TRU, LL85801109TRU, LL85300999TRU and LL85500979TRU. All replicate measurement results are identical at the 95% confidence level as established by WIPP criteria. Note that the batch covered 5 weeks of SGS measurements from 23-Jan-2002 through 22-Feb-2002. Data packet for SGS Batch 2002-02 generated using gamma spectroscopy with the Pu Facility SGS unit is technically reasonable. All QC samples are in compliance with established control limits.more » The batch data packet has been reviewed for correctness, completeness, consistency and compliance with WIPP's Quality Assurance Objectives and determined to be acceptable. An Expert Review was performed on the data packet between 28-Feb-02 and 09-Jul-02 to check for potential U-235, Np-237 and Am-241 interferences and address drum cases where specific scan segments showed Se gamma ray transmissions for the 136-keV gamma to be below 0.1 %. Two drums in the batch showed Pu-238 at a relative mass ratio more than 2% of all the Pu isotopes.« less

A combined intervention to reduce interruptions during medication preparation and double-checking: a pilot-study evaluating the impact of staff training and safety vests.

PubMed

Huckels-Baumgart, Saskia; Niederberger, Milena; Manser, Tanja; Meier, Christoph R; Meyer-Massetti, Carla

2017-10-01

The aim was to evaluate the impact of staff training and wearing safety vests as a combined intervention on interruptions during medication preparation and double-checking. Interruptions and errors during the medication process are common and an important issue for patient safety in the hospital setting. We performed a pre- and post-intervention pilot-study using direct structured observation of 26 nurses preparing and double-checking 431 medication doses (225 pre-intervention and 206 post-intervention) for 36 patients (21 pre-intervention and 15 post-intervention). With staff training and the introduction of safety vests, the interruption rate during medication preparation was reduced from 36.8 to 28.3 interruptions per hour and during double-checking from 27.5 to 15 interruptions per hour. This pilot-study showed that the frequency of interruptions decreased during the critical tasks of medication preparation and double-checking after the introduction of staff training and wearing safety vests as part of a quality improvement process. Nursing management should acknowledge interruptions as an important factor potentially influencing medication safety. Unnecessary interruptions can be successfully reduced by considering human and system factors and increasing both staff and nursing managers' awareness of 'interruptive communication practices' and implementing physical barriers. This is the first pilot-study specifically evaluating the impact of staff training and wearing safety vests on the reduction of interruptions during medication preparation and double-checking. © 2017 John Wiley & Sons Ltd.

Lake water quality mapping from LANDSAT

NASA Technical Reports Server (NTRS)

Scherz, J. P.

1977-01-01

The lakes in three LANDSAT scenes were mapped by the Bendix MDAS multispectral analysis system. Field checking the maps by three separate individuals revealed approximately 90-95% correct classification for the lake categories selected. Variations between observers was about 5%. From the MDAS color coded maps the lake with the worst algae problem was easily located. This lake was closely checked and a pollution source of 100 cows was found in the springs which fed this lake. The theory, lab work and field work which made it possible for this demonstration project to be a practical lake classification procedure are presented.

The Z1 truss is moved to check weight and balance

NASA Technical Reports Server (NTRS)

2000-01-01

In the Space Station Processing Facility, workers watch as the Integrated Truss Structure Z1, an element of the International Space Station, is moved to another stand to check its weight and balance. The Z1 truss is the first of 10 trusses that will become the backbone of the Space Station, eventually stretching the length of a football field. Along with its companion payload, the third Pressurized Mating Adapter, the Z1 is scheduled to be launched aboard Space Shuttle Discovery Oct. 5 at 9:38 p.m. EDT. The launch will be the 100th in the Shuttle program.

Unity nameplate gets final check before being attached to module for ISS and Mission STS-88

NASA Technical Reports Server (NTRS)

1998-01-01

- In the Space Station Processing Facility, workers make a final check of the nameplate to be attached to the Unity connecting module, part of the International Space Station. Unity was expected to be transported to Launch Pad 39A on Oct. 26 for launch aboard Space Shuttle Endeavour on Mission STS-88 in December. The Unity is a connecting passageway to the living and working areas of ISS. While on orbit, the flight crew will deploy Unity from the payload bay and attach Unity to the Russian-built Zarya control module which will be in orbit at that time.

Conceptual design of ACB-CP for ITER cryogenic system

NASA Astrophysics Data System (ADS)

Jiang, Yongcheng; Xiong, Lianyou; Peng, Nan; Tang, Jiancheng; Liu, Liqiang; Zhang, Liang

2012-06-01

ACB-CP (Auxiliary Cold Box for Cryopumps) is used to supply the cryopumps system with necessary cryogen in ITER (International Thermonuclear Experimental Reactor) cryogenic distribution system. The conceptual design of ACB-CP contains thermo-hydraulic analysis, 3D structure design and strength checking. Through the thermohydraulic analysis, the main specifications of process valves, pressure safety valves, pipes, heat exchangers can be decided. During the 3D structure design process, vacuum requirement, adiabatic requirement, assembly constraints and maintenance requirement have been considered to arrange the pipes, valves and other components. The strength checking has been performed to crosscheck if the 3D design meets the strength requirements for the ACB-CP.

Clarus quality checking algorithm documentation report.

DOT National Transportation Integrated Search

2010-12-21

With funding and support from the USDOT RITA IntelliDrive(SM) initiative and direction from the FHWA Road Weather Management Program, NCAR enhanced QCh algorithms that are a part of the current Clarus System. Moreover, NCAR developed new QCh algorith...

SFOG (Solid Fuel Oxygen Generator) candles in the RS (Russian Segment)

NASA Image and Video Library

2009-08-16

ISS020-E-031138 (16 Aug. 2009) --- Cosmonaut Gennady Padalka, Expedition 20 commander, performs a check on the Russian POTOK-150MK (150 micron) air filter unit of the Zvezda Service Module’s SOGS air revitalization subsystem on the International Space Station.

SFOG (Solid Fuel Oxygen Generator) candles in the RS (Russian Segment)

NASA Image and Video Library

2009-08-16

ISS020-E-031128 (16 Aug. 2009) --- Cosmonaut Gennady Padalka, Expedition 20 commander, performs a check on the Russian POTOK-150MK (150 micron) air filter unit of the Zvezda Service Module’s SOGS air revitalization subsystem on the International Space Station.

The Second Stroke Audit of Catalonia shows improvements in many, but not all quality indicators.

PubMed

Abilleira, Sònia; Ribera, Aida; Sánchez, Emília; Tresserras, Ricard; Gallofré, Miquel

2012-01-01

Periodic audits allow monitoring of healthcare quality by comparing performances at different time points. Aims To assess quality of in-hospital stroke care in Catalonia in 2007 and compare it with 2005 (post-/preguidelines delivery, respectively). Data on 13 evidence-based performance measures were collected by a retrospective review of medical records of consecutive stroke admissions (January-December 2007) to 47 acute hospitals in Catalonia. Adherence was calculated according to the ratio (patients with documented performance measures' compliance) (valid cases for that measure). Sampling weights were applied to produce estimates of compliance. The proportions of compliance with performance measures in both audits were compared using random-effects logistic regressions, with each performance measure as the dependent variable and audit edition as the explanatory variable to determine whether changes in stroke care quality occurred along time. We analyzed 1767 events distributed among 47 hospitals. In 2007, there was an increase in tissue plasminogen activator administrations (2·8% vs. 5·9%) and stroke unit admissions (16·6% vs. 22·6%) and a reduction in seven-day mortality (9·5% vs. 6·8%). Logistic regression models provided evidence of improved adherences to seven performance measures (screening of dysphagia, management of hyperthermia, baseline computed tomography scan, baseline glycemia, rehabilitation needs, early mobilization, and anticoagulants for atrial fibrillation), but worsening of management of hypertension, dyslipidemia, and antithrombotics at discharge. The remaining three performance measures showed no changes. The Second Stroke Audit showed improvements in most dimensions of care, although unexpectedly a few but relevant performance measures became worse. Therefore, periodic stroke audits are needed to check changes in quality of care over time. © 2011 The Authors. International Journal of Stroke © 2011 World Stroke Organization.

Experimental verification of internal parameter in magnetically coupled boost used as PV optimizer in parallel association

NASA Astrophysics Data System (ADS)

Sawicki, Jean-Paul; Saint-Eve, Frédéric; Petit, Pierre; Aillerie, Michel

2017-02-01

This paper presents results of experiments aimed to verify a formula able to compute duty cycle in the case of pulse width modulation control for a DC-DC converter designed and realized in laboratory. This converter, called Magnetically Coupled Boost (MCB) is sized to step up only one photovoltaic module voltage to supply directly grid inverters. Duty cycle formula will be checked in a first time by identifying internal parameter, auto-transformer ratio, and in a second time by checking stability of operating point on the side of photovoltaic module. Thinking on nature of generator source and load connected to converter leads to imagine additional experiments to decide if auto-transformer ratio parameter could be used with fixed value or on the contrary with adaptive value. Effects of load variations on converter behavior or impact of possible shading on photovoltaic module are also mentioned, with aim to design robust control laws, in the case of parallel association, designed to compensate unwanted effects due to output voltage coupling.

Ab initio analytical Raman intensities for periodic systems through a coupled perturbed Hartree-Fock/Kohn-Sham method in an atomic orbital basis. II. Validation and comparison with experiments

NASA Astrophysics Data System (ADS)

Maschio, Lorenzo; Kirtman, Bernard; Rérat, Michel; Orlando, Roberto; Dovesi, Roberto

2013-10-01

In this work, we validate a new, fully analytical method for calculating Raman intensities of periodic systems, developed and presented in Paper I [L. Maschio, B. Kirtman, M. Rérat, R. Orlando, and R. Dovesi, J. Chem. Phys. 139, 164101 (2013)]. Our validation of this method and its implementation in the CRYSTAL code is done through several internal checks as well as comparison with experiment. The internal checks include consistency of results when increasing the number of periodic directions (from 0D to 1D, 2D, 3D), comparison with numerical differentiation, and a test of the sum rule for derivatives of the polarizability tensor. The choice of basis set as well as the Hamiltonian is also studied. Simulated Raman spectra of α-quartz and of the UiO-66 Metal-Organic Framework are compared with the experimental data.

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, KSC employee Chris Moore repairs tile on the forward area of the orbiter Discovery. The vehicle has undergone Orbiter Major Modifications in the past year, which includes tile check and repair. The tiles are part of the Orbiter Thermal Protection System, thermal shields to protect against temperatures as high as 3,000° Fahrenheit, which are produced during descent for landing. Discovery is scheduled to fly on mission STS-121 to the International Space Station.

NASA Image and Video Library

2003-12-09

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, KSC employee Chris Moore repairs tile on the forward area of the orbiter Discovery. The vehicle has undergone Orbiter Major Modifications in the past year, which includes tile check and repair. The tiles are part of the Orbiter Thermal Protection System, thermal shields to protect against temperatures as high as 3,000° Fahrenheit, which are produced during descent for landing. Discovery is scheduled to fly on mission STS-121 to the International Space Station.

The Effect of the MassHealth Hospital Pay-for-Performance Program on Quality

PubMed Central

Ryan, Andrew M; Blustein, Jan

2011-01-01

Objective To test the effect of Massachusetts Medicaid's (MassHealth) hospital-based pay-for-performance (P4P) program, implemented in 2008, on quality of care for pneumonia and surgical infection prevention (SIP). Data Hospital Compare process of care quality data from 2004 to 2009 for acute care hospitals in Massachusetts (N = 62) and other states (N = 3,676) and American Hospital Association data on hospital characteristics from 2005. Study Design Panel data models with hospital fixed effects and hospital-specific trends are estimated to test the effect of P4P on composite quality for pneumonia and SIP. This base model is extended to control for the completeness of measure reporting. Further sensitivity checks include estimation with propensity-score matched control hospitals, excluding hospitals in other P4P programs, varying the time period during which the program was assumed to have an effect, and testing the program effect across hospital characteristics. Principal Findings Estimates from our preferred specification, including hospital fixed effects, trends, and the control for measure completeness, indicate small and nonsignificant program effects for pneumonia (−0.67 percentage points, p>.10) and SIP (−0.12 percentage points, p>.10). Sensitivity checks indicate a similar pattern of findings across specifications. Conclusions Despite offering substantial financial incentives, the MassHealth P4P program did not improve quality in the first years of implementation. PMID:21210796

Reforestation strategies amid social instability: lessons from Afghanistan.

PubMed

Groninger, John W

2012-04-01

Foreign and domestic government agencies and other international organizations pursue reforestation programs in rural upper watershed areas of Afghanistan over the past decade to alleviate poverty, combat the insurgency and rehabilitate a depleted forest resource base. Popular programs incorporate cash-for-work to conduct hillside terracing, check dam construction and tree-planting for nut production, fuel wood, timber, dune stabilization, and erosion abatement. Programmatic approaches have varied as a function of accessibility, security and local objectives. Uncertain land tenure and use rights, weak local environmental management capacity, and a focus on agricultural production to meet immediate needs limit interest, nationally and locally. Unreliable security, a lack of high quality tree planting stock, limited technical knowledge and coordination among government agencies, and poor security hamper program expansion. Reforestation success would be most likely where these issues are least acute. The Afghan government should focus on supporting community based natural resource management, developing and disseminating improved conservation tree nursery strategies, and promoting watershed management schemes that incorporate forestry, range management and agronomic production. Reforestation practitioners could benefit from the human and material resources now present as part of the international war effort. Successes and failures encountered in Afghanistan should be considered in order to address similar problems in insecure regions elsewhere when reforestation may help reverse environmental degradation and contribute to broader social stabilization efforts.

Development of a Multi-Behavioral mHealth App for Women Smokers.

PubMed

Armin, Julie; Johnson, Thienne; Hingle, Melanie; Giacobbi, Peter; Gordon, Judith S

2017-02-01

This article describes the development of the See Me Smoke-Free™ (SMSF) mobile health application, which uses guided imagery to support women in smoking cessation, eating a healthy diet, and increasing physical activity. Focus group discussions, with member checks, were conducted to refine the intervention content and app user interface. Data related to the context of app deployment were collected via user testing sessions and internal quality control testing, which identified and addressed functionality issues, content problems, and bugs. Interactive app features include playback of guided imagery audio files, notification pop-ups, award-sharing on social media, a tracking calendar, content resources, and direct call to the local tobacco quitline. Focus groups helped design the user interface and identified several themes for incorporation into app content, including positivity, the rewards of smoking cessation, and the integrated benefits of maintaining a healthy lifestyle. User testing improved app functionality and usability on many Android phone models. Changes to the app content and function were made iteratively by the development team as a result of focus group and user testing. Despite extensive internal and user testing, unanticipated data collection and reporting issues emerged during deployment due not only to the variety of Android software and hardware but also to individual phone settings and use.

Reforestation Strategies Amid Social Instability: Lessons from Afghanistan

NASA Astrophysics Data System (ADS)

Groninger, John W.

2012-04-01

Foreign and domestic government agencies and other international organizations pursue reforestation programs in rural upper watershed areas of Afghanistan over the past decade to alleviate poverty, combat the insurgency and rehabilitate a depleted forest resource base. Popular programs incorporate cash-for-work to conduct hillside terracing, check dam construction and tree-planting for nut production, fuel wood, timber, dune stabilization, and erosion abatement. Programmatic approaches have varied as a function of accessibility, security and local objectives. Uncertain land tenure and use rights, weak local environmental management capacity, and a focus on agricultural production to meet immediate needs limit interest, nationally and locally. Unreliable security, a lack of high quality tree planting stock, limited technical knowledge and coordination among government agencies, and poor security hamper program expansion. Reforestation success would be most likely where these issues are least acute. The Afghan government should focus on supporting community based natural resource management, developing and disseminating improved conservation tree nursery strategies, and promoting watershed management schemes that incorporate forestry, range management and agronomic production. Reforestation practitioners could benefit from the human and material resources now present as part of the international war effort. Successes and failures encountered in Afghanistan should be considered in order to address similar problems in insecure regions elsewhere when reforestation may help reverse environmental degradation and contribute to broader social stabilization efforts.

Methods to achieve high interrater reliability in data collection from primary care medical records.

PubMed

Liddy, Clare; Wiens, Miriam; Hogg, William

2011-01-01

We assessed interrater reliability (IRR) of chart abstractors within a randomized trial of cardiovascular care in primary care. We report our findings, and outline issues and provide recommendations related to determining sample size, frequency of verification, and minimum thresholds for 2 measures of IRR: the κ statistic and percent agreement. We designed a data quality monitoring procedure having 4 parts: use of standardized protocols and forms, extensive training, continuous monitoring of IRR, and a quality improvement feedback mechanism. Four abstractors checked a 5% sample of charts at 3 time points for a predefined set of indicators of the quality of care. We set our quality threshold for IRR at a κ of 0.75, a percent agreement of 95%, or both. Abstractors reabstracted a sample of charts in 16 of 27 primary care practices, checking a total of 132 charts with 38 indicators per chart. The overall κ across all items was 0.91 (95% confidence interval, 0.90-0.92) and the overall percent agreement was 94.3%, signifying excellent agreement between abstractors. We gave feedback to the abstractors to highlight items that had a κ of less than 0.70 or a percent agreement less than 95%. No practice had to have its charts abstracted again because of poor quality. A 5% sampling of charts for quality control using IRR analysis yielded κ and agreement levels that met or exceeded our quality thresholds. Using 3 time points during the chart audit phase allows for early quality control as well as ongoing quality monitoring. Our results can be used as a guide and benchmark for other medical chart review studies in primary care.

Analysis of Solar Spectral Irradiance Measurements from the SBUV/2-Series and the SSBUV Instruments

NASA Technical Reports Server (NTRS)

Cebula, Richard P.; DeLand, Matthew T.; Hilsenrath, Ernest

1997-01-01

During this period of performance, 1 March 1997 - 31 August 1997, the NOAA-11 SBUV/2 solar spectral irradiance data set was validated using both internal and external assessments. Initial quality checking revealed minor problems with the data (e.g. residual goniometric errors, that were manifest as differences between the two scans acquired each day). The sources of these errors were determined and the errors were corrected. Time series were constructed for selected wavelengths and the solar irradiance changes measured by the instrument were compared to a Mg II proxy-based model of short- and long-term solar irradiance variations. This analysis suggested that errors due to residual, uncorrected long-term instrument drift have been reduced to less than 1-2% over the entire 5.5 year NOAA-11 data record. Detailed statistical analysis was performed. This analysis, which will be documented in a manuscript now in preparation, conclusively demonstrates the evolution of solar rotation periodicity and strength during solar cycle 22.

[New context for the Individual Healthcare Professions Act (BIG law)].

PubMed

Sijmons, Jaap G; Winter, Heinrich B; Hubben, Joep H

2014-01-01

In 2013 the Dutch Individual Healthcare Professions Act (known as the BIG law) was evaluated for the second time. The research showed that patients have limited awareness of the registration of healthcare professionals and that the system of reserved procedures is almost unknown. On the other hand, healthcare institutions (especially hospitals) frequently check the register, as do healthcare insurance companies when contracting institutions. Knowledge of the reserved procedures system is moderate amongst professionals too, while the organisation of care is to a great extent based on this system. Since the change of system in 2006 quality assurance in professional practice has been much more rooted in the internal structure of care; in this way, the BIG law did not go the way the legislator intended. According to the researchers, this has not prevented the BIG law from still playing an essential function. Indeed, the BIG law has not reached its final destination, but it may reach its goal via another route.

[Indications of lung transplantation: Patients selection, timing of listing, and choice of procedure].

PubMed

Morisse Pradier, H; Sénéchal, A; Philit, F; Tronc, F; Maury, J-M; Grima, R; Flamens, C; Paulus, S; Neidecker, J; Mornex, J-F

2016-02-01

Lung transplantation (LT) is now considered as an excellent treatment option for selected patients with end-stage pulmonary diseases, such as COPD, cystic fibrosis, idiopathic pulmonary fibrosis, and pulmonary arterial hypertension. The 2 goals of LT are to provide a survival benefit and to improve quality of life. The 3-step decision process leading to LT is discussed in this review. The first step is the selection of candidates, which requires a careful examination in order to check absolute and relative contraindications. The second step is the timing of listing for LT; it requires the knowledge of disease-specific prognostic factors available in international guidelines, and discussed in this paper. The third step is the choice of procedure: indications of heart-lung, single-lung, and bilateral-lung transplantation are described. In conclusion, this document provides guidelines to help pulmonologists in the referral and selection processes of candidates for transplantation in order to optimize the outcome of LT. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

Value of HIV patients with regular follow-up as in-house internal controls of flow cytometry measurement of lymphocyte subsets.

PubMed

de Carvalho Bittencourt, Marcelo; Kohler, Chantal; Henard, Sandrine; Rabaud, Christian; Béné, Marie C; Faure, Gilbert C

2013-07-08

Background. Quality assessment in flow cytometry cannot obey the same rules as those applicable to the measurement of chemical analytes. However, regular follow-up of known patients may provide a robust in-house control of cell subsets evaluation. Methods. Sequential blood samples assessed for 32 HIV patients over several years and showing good stability were retrospectively assessed to establish coefficient of variations of the percentages of CD3+, CD4+, CD8+ cells and CD4+ absolute counts. Results. Mean relative standard variations for the whole cohort were of 0.04, 0.14, 0.08 and 0.18 for CD3%, CD4% CD8% and CD4 absolute counts respectively. Discussion. In-house follow up of regularly checked compliant patients is a good alternative to traditional and costly repeatability and reproducibility studies for the validation of routine flow cytometry. © 2013 Clinical Cytometry Society. Copyright © 2013 Clinical Cytometry Society.

Signal processing and calibration procedures for in situ diode-laser absorption spectroscopy.

PubMed

Werle, P W; Mazzinghi, P; D'Amato, F; De Rosa, M; Maurer, K; Slemr, F

2004-07-01

Gas analyzers based on tunable diode-laser spectroscopy (TDLS) provide high sensitivity, fast response and highly specific in situ measurements of several atmospheric trace gases simultaneously. Under optimum conditions even a shot noise limited performance can be obtained. For field applications outside the laboratory practical limitations are important. At ambient mixing ratios below a few parts-per-billion spectrometers become more and more sensitive towards noise, interference, drift effects and background changes associated with low level signals. It is the purpose of this review to address some of the problems which are encountered at these low levels and to describe a signal processing strategy for trace gas monitoring and a concept for in situ system calibration applicable for tunable diode-laser spectroscopy. To meet the requirement of quality assurance for field measurements and monitoring applications, procedures to check the linearity according to International Standard Organization regulations are described and some measurements of calibration functions are presented and discussed.

Using fingerprint image quality to improve the identification performance of the U.S. Visitor and Immigrant Status Indicator Technology Program

PubMed Central

Wein, Lawrence M.; Baveja, Manas

2005-01-01

Motivated by the difficulty of biometric systems to correctly match fingerprints with poor image quality, we formulate and solve a game-theoretic formulation of the identification problem in two settings: U.S. visa applicants are checked against a list of visa holders to detect visa fraud, and visitors entering the U.S. are checked against a watchlist of criminals and suspected terrorists. For three types of biometric strategies, we solve the game in which the U.S. Government chooses the strategy's optimal parameter values to maximize the detection probability subject to a constraint on the mean biometric processing time per legal visitor, and then the terrorist chooses the image quality to minimize the detection probability. At current inspector staffing levels at ports of entry, our model predicts that a quality-dependent two-finger strategy achieves a detection probability of 0.733, compared to 0.526 under the quality-independent two-finger strategy that is currently implemented at the U.S. border. Increasing the staffing level of inspectors offers only minor increases in the detection probability for these two strategies. Using more than two fingers to match visitors with poor image quality allows a detection probability of 0.949 under current staffing levels, but may require major changes to the current U.S. biometric program. The detection probabilities during visa application are ≈11–22% smaller than at ports of entry for all three strategies, but the same qualitative conclusions hold. PMID:15894628

Using fingerprint image quality to improve the identification performance of the U.S. Visitor and Immigrant Status Indicator Technology Program.

PubMed

Wein, Lawrence M; Baveja, Manas

2005-05-24

Motivated by the difficulty of biometric systems to correctly match fingerprints with poor image quality, we formulate and solve a game-theoretic formulation of the identification problem in two settings: U.S. visa applicants are checked against a list of visa holders to detect visa fraud, and visitors entering the U.S. are checked against a watchlist of criminals and suspected terrorists. For three types of biometric strategies, we solve the game in which the U.S. Government chooses the strategy's optimal parameter values to maximize the detection probability subject to a constraint on the mean biometric processing time per legal visitor, and then the terrorist chooses the image quality to minimize the detection probability. At current inspector staffing levels at ports of entry, our model predicts that a quality-dependent two-finger strategy achieves a detection probability of 0.733, compared to 0.526 under the quality-independent two-finger strategy that is currently implemented at the U.S. border. Increasing the staffing level of inspectors offers only minor increases in the detection probability for these two strategies. Using more than two fingers to match visitors with poor image quality allows a detection probability of 0.949 under current staffing levels, but may require major changes to the current U.S. biometric program. The detection probabilities during visa application are approximately 11-22% smaller than at ports of entry for all three strategies, but the same qualitative conclusions hold.

Quality Assurance in the Presence of Variability

NASA Astrophysics Data System (ADS)

Lauenroth, Kim; Metzger, Andreas; Pohl, Klaus

Software Product Line Engineering (SPLE) is a reuse-driven development paradigm that has been applied successfully in information system engineering and other domains. Quality assurance of the reusable artifacts of the product line (e.g. requirements, design, and code artifacts) is essential for successful product line engineering. As those artifacts are reused in several products, a defect in a reusable artifact can affect several products of the product line. A central challenge for quality assurance in product line engineering is how to consider product line variability. Since the reusable artifacts contain variability, quality assurance techniques from single-system engineering cannot directly be applied to those artifacts. Therefore, different strategies and techniques have been developed for quality assurance in the presence of variability. In this chapter, we describe those strategies and discuss in more detail one of those strategies, the so called comprehensive strategy. The comprehensive strategy aims at checking the quality of all possible products of the product line and thus offers the highest benefits, since it is able to uncover defects in all possible products of the product line. However, the central challenge for applying the comprehensive strategy is the complexity that results from the product line variability and the large number of potential products of a product line. In this chapter, we present one concrete technique that we have developed to implement the comprehensive strategy that addresses this challenge. The technique is based on model checking technology and allows for a comprehensive verification of domain artifacts against temporal logic properties.

Radioxenon spiked air

DOE PAGES

Watrous, Matthew G.; Delmore, James E.; Hague, Robert K.; ...

2015-08-27

Four of the radioactive xenon isotopes ( 131mXe, 133mXe, 133Xe and 135Xe) with half-lives ranging from 9 h to 12 days are produced from nuclear fission and can be detected from days to weeks following their production and release. Being inert gases, they are readily transported through the atmosphere. Sources for release of radioactive xenon isotopes include operating nuclear reactors via leaks in fuel rods, medical isotope production facilities, and nuclear weapons' detonations. They are not normally released from fuel reprocessing due to the short half-lives. The Comprehensive Nuclear-Test-Ban Treaty has led to creation of the International Monitoring System. Themore » International Monitoring System, when fully implemented, will consist of one component with 40 stations monitoring radioactive xenon around the globe. Monitoring these radioactive xenon isotopes is important to the Comprehensive Nuclear-Test-Ban Treaty in determining whether a seismically detected event is or is not a nuclear detonation. A variety of radioactive xenon quality control check standards, quantitatively spiked into various gas matrices, could be used to demonstrate that these stations are operating on the same basis in order to bolster defensibility of data across the International Monitoring System. This study focuses on Idaho National Laboratory's capability to produce three of the xenon isotopes in pure form and the use of the four xenon isotopes in various combinations to produce radioactive xenon spiked air samples that could be subsequently distributed to participating facilities.« less

Radioxenon spiked air

DOE Office of Scientific and Technical Information (OSTI.GOV)

Watrous, Matthew G.; Delmore, James E.; Hague, Robert K.

Four of the radioactive xenon isotopes ( 131mXe, 133mXe, 133Xe and 135Xe) with half-lives ranging from 9 h to 12 days are produced from nuclear fission and can be detected from days to weeks following their production and release. Being inert gases, they are readily transported through the atmosphere. Sources for release of radioactive xenon isotopes include operating nuclear reactors via leaks in fuel rods, medical isotope production facilities, and nuclear weapons' detonations. They are not normally released from fuel reprocessing due to the short half-lives. The Comprehensive Nuclear-Test-Ban Treaty has led to creation of the International Monitoring System. Themore » International Monitoring System, when fully implemented, will consist of one component with 40 stations monitoring radioactive xenon around the globe. Monitoring these radioactive xenon isotopes is important to the Comprehensive Nuclear-Test-Ban Treaty in determining whether a seismically detected event is or is not a nuclear detonation. A variety of radioactive xenon quality control check standards, quantitatively spiked into various gas matrices, could be used to demonstrate that these stations are operating on the same basis in order to bolster defensibility of data across the International Monitoring System. This study focuses on Idaho National Laboratory's capability to produce three of the xenon isotopes in pure form and the use of the four xenon isotopes in various combinations to produce radioactive xenon spiked air samples that could be subsequently distributed to participating facilities.« less