Global standard for the composition of infant formula: recommendations of an ESPGHAN coordinated international expert group.

PubMed

Koletzko, Berthold; Baker, Susan; Cleghorn, Geoff; Neto, Ulysses Fagundes; Gopalan, Sarath; Hernell, Olle; Hock, Quak Seng; Jirapinyo, Pipop; Lonnerdal, Bo; Pencharz, Paul; Pzyrembel, Hildegard; Ramirez-Mayans, Jaime; Shamir, Raanan; Turck, Dominique; Yamashiro, Yuichiro; Zong-Yi, Ding

2005-11-01

The Codex Alimentarius Commission of the Food and Agriculture Organization of the United Nations (FAO) and the World Health Organization (WHO) develops food standards, guidelines and related texts for protecting consumer health and ensuring fair trade practices globally. The major part of the world's population lives in more than 160 countries that are members of the Codex Alimentarius. The Codex Standard on Infant Formula was adopted in 1981 based on scientific knowledge available in the 1970s and is currently being revised. As part of this process, the Codex Committee on Nutrition and Foods for Special Dietary Uses asked the ESPGHAN Committee on Nutrition to initiate a consultation process with the international scientific community to provide a proposal on nutrient levels in infant formulae, based on scientific analysis and taking into account existing scientific reports on the subject. ESPGHAN accepted the request and, in collaboration with its sister societies in the Federation of International Societies on Pediatric Gastroenterology, Hepatology and Nutrition, invited highly qualified experts in the area of infant nutrition to form an International Expert Group (IEG) to review the issues raised. The group arrived at recommendations on the compositional requirements for a global infant formula standard which are reported here.

Use of a Deuterated Internal Standard with Pyrolysis-GC/MS Dimeric Marker Analysis to Quantify Tire Tread Particles in the Environment

PubMed Central

Unice, Kenneth M.; Kreider, Marisa L.; Panko, Julie M.

2012-01-01

Pyrolysis(pyr)-GC/MS analysis of characteristic thermal decomposition fragments has been previously used for qualitative fingerprinting of organic sources in environmental samples. A quantitative pyr-GC/MS method based on characteristic tire polymer pyrolysis products was developed for tread particle quantification in environmental matrices including soil, sediment, and air. The feasibility of quantitative pyr-GC/MS analysis of tread was confirmed in a method evaluation study using artificial soil spiked with known amounts of cryogenically generated tread. Tread concentration determined by blinded analyses was highly correlated (r2 ≥ 0.88) with the known tread spike concentration. Two critical refinements to the initial pyrolysis protocol were identified including use of an internal standard and quantification by the dimeric markers vinylcyclohexene and dipentene, which have good specificity for rubber polymer with no other appreciable environmental sources. A novel use of deuterated internal standards of similar polymeric structure was developed to correct the variable analyte recovery caused by sample size, matrix effects, and ion source variability. The resultant quantitative pyr-GC/MS protocol is reliable and transferable between laboratories. PMID:23202830

Direct solid analysis of powdered tungsten carbide hardmetal precursors by laser-induced argon spark ablation with inductively coupled plasma atomic emission spectrometry.

PubMed

Holá, Markéta; Kanický, Viktor; Mermet, Jean-Michel; Otruba, Vítezslav

2003-12-01

The potential of the laser-induced argon spark atomizer (LINA-Spark atomizer) coupled with ICP-AES as a convenient device for direct analysis of WC/Co powdered precursors of sintered hardmetals was studied. The samples were presented for the ablation as pressed pellets prepared by mixing with powdered silver binder containing GeO2 as internal standard. The pellets were ablated with the aid of a Q-switched Nd:YAG laser (1064 nm) focused 16 mm behind the target surface with a resulting estimated power density of 5 GW cm(-2). Laser ablation ICP-AES signals were studied as a function of ablation time, and the duration of time prior to measurement (pre-ablation time) which was necessary to obtain reliable results was about 40 s. Linear calibration plots were obtained up to 10% (m/m) Ti, 9% Ta and 3.5% Nb both without internal standardization and by using germanium as an added internal standard or tungsten as a contained internal standard. The relative uncertainty at the centroid of the calibration line was in the range from +/- 6% to +/- 11% for Nb, Ta and Ti both with and without internal standardisation by Ge. A higher spread of points about the regression was observed for cobalt for which the relative uncertainty at the centroid was in the range from +/- 9% to +/- 14%. Repeatability of results was improved by the use of both Ge and W internal standards. The lowest determinable quantities calculated for calibration plots were 0.060% Co, 0.010% Nb, 0.16% Ta and 0.030% Ti with internal standardization by Ge. The LA-ICP-AES analyses of real samples led to good agreement with the results obtained by solution-based ICP determination with a relative bias not exceeding 10%. The elimination of the dissolution procedure of powdered tungsten (Nb, Ta, Ti) carbide is the principal advantage of the developed LA-ICP-AES method.

Implementation of a standards-based anaesthesia record compliant with the health level 7 (HL7) clinical document architecture (CDA).

PubMed

Hurrell, M J; Monk, T G; Nicol, A; Norton, A N; Reich, D L; Walsh, J L

2012-08-01

With the increasing use of anaesthesia information management systems (AIMS) there is the opportunity for different institutions to aggregate and share information both nationally and internationally. Potential uses of such aggregated data include outcomes research, benchmarking and improvement in clinical practice and patient safety. However, these goals can only be achieved if data contained in records from different sources are truly comparable and there is semantic inter-operability. This paper describes the development of a standard terminology for anaesthesia and also a Domain Analysis Model and implementation guide to facilitate a standard representation of AIMS records as extensible markup language documents that are compliant with the Health Level 7 Version 3 clinical document architecture. A representation of vital signs that is compliant with the International Standards Organization 11073 standard is also discussed.

Codex Alimentarius: food quality and safety standards for international trade.

PubMed

Randell, A W; Whitehead, A J

1997-08-01

Since 1962, the Codex Alimentarius Commission (CAC) of the Food and Agriculture Organisation/World Health Organisation has been responsible for developing standards, guidelines and other recommendations on the quality and safety of food to protect the health of consumers and to ensure fair practices in food trade. The mission of the CAC remains relevant, but a number of factors have shown the need for new techniques to form the basis of food standards, the most important of which is risk analysis. The authors give a brief description of the role and work of the CAC and the efforts deployed by the Commission to respond to the challenges posed by new approaches to government regulation, harmonisation of national requirements based on international standards and the role of civil society.

1998 Conference on Precision Electromagnetic Measurements Digest. Proceedings.

NASA Astrophysics Data System (ADS)

Nelson, T. L.

The following topics were dealt with: fundamental constants; caesium standards; AC-DC transfer; impedance measurement; length measurement; units; statistics; cryogenic resonators; time transfer; QED; resistance scaling and bridges; mass measurement; atomic fountains and clocks; single electron transport; Newtonian constant of gravitation; stabilised lasers and frequency measurements; cryogenic current comparators; optical frequency standards; high voltage devices and systems; international compatibility; magnetic measurement; precision power measurement; high resolution spectroscopy; DC transport standards; waveform acquisition and analysis; ion trap standards; optical metrology; quantised Hall effect; Josephson array comparisons; signal generation and measurement; Avogadro constant; microwave networks; wideband power standards; antennas, fields and EMC; quantum-based standards.

Analysis of household refrigerators for different testing standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bansal, P.K.; McGill, I.

This study highlights the salient differences among various testing standards for household refrigerator-freezers and proposes a methodology for predicting the performance of a single evaporator-based vapor-compression refrigeration system (either refrigerator or freezer) from one test standard (where the test data are available-the reference case) to another (the alternative case). The standards studied during this investigation include the Australian-New Zealand Standard (ANZS), the International Standard (ISO), the American National Standard (ANSI), the Japanese Industrial Standard (JIS), and the Chinese National Standard (CNS). A simple analysis in conjunction with the BICYCLE model (Bansal and Rice 1993) is used to calculate the energymore » consumption of two refrigerator cabinets from the reference case to the alternative cases. The proposed analysis includes the effect of door openings (as required by the JIS) as well as defrost heaters. The analytical results are found to agree reasonably well with the experimental observations for translating energy consumption information from one standard to another.« less

Internal standards for use in the comprehensive analysis of polychlorinated aromatic hydrocarbons using gas chromatography combined with multiphoton ionization mass spectrometry.

PubMed

Li, Adan; Imasaka, Totaro

2016-10-28

To decrease health-risks to humans, non-toxic compounds were evaluated for use as internal standards for calibrating data obtained by gas chromatography/multiphoton ionization mass spectrometry (GC-MPI-MS) using an ultraviolet femtosecond laser as the ionization source. The retention time in the mass chromatogram was calibrated using a retention index, in which a series of n-alkanes was employed as internal standards for evaluating the retention times for polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and polychlorinated biphenyls (PCBs). To compensate for changes in signal intensity in MPI-MS, the dependence of signal intensity on the laser pulse energy was investigated for the dioxin-like compounds, in addition to five non-toxic aromatic hydrocarbons, that were used as internal standards. Based on their similar behavior,the non-toxic PCDD/PCDF, its 13 C-isotope, and pentachlorobenzene behave similarly, we conclude that they can be used for calibrating the signal intensities in MPI-MS. Copyright © 2016 Elsevier B.V. All rights reserved.

Starworld: Preparing Accountants for the Future: A Case-Based Approach to Teach International Financial Reporting Standards Using ERP Software

ERIC Educational Resources Information Center

Ragan, Joseph M.; Savino, Christopher J.; Parashac, Paul; Hosler, Jonathan C.

2010-01-01

International Financial Reporting Standards now constitute an important part of educating young professional accountants. This paper looks at a case based process to teach International Financial Reporting Standards using integrated Enterprise Resource Planning software. The case contained within the paper can be used within a variety of courses…

Study on quantitative analysis of Ti, Al and V in clinical soft tissues after placing the dental implants by laser ablation inductively coupled plasma mass spectrometry

NASA Astrophysics Data System (ADS)

Sajnóg, Adam; Hanć, Anetta; Makuch, Krzysztof; Koczorowski, Ryszard; Barałkiewicz, Danuta

2016-11-01

Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) was used for in-situ quantitative analysis of oral mucosa of patients before and after implantation with titanium implants and a closing screw based on Ti6Al4V alloy. Two calibration strategies were applied, both were based on matrix matched solid standards with analytes addition. A novel approach was the application of powdered egg white proteins as a matrix material which have a similar composition to the examined tissue. In the another approach, certified reference material Bovine Muscle ERM-BB184 was used. The isotope 34S was found to be the most appropriate as an internal standard since it is homogenously distributed in the examined tissues and resulted in lower relative standard deviation values of signal of analytes of interest. Other isotopes (13C, 26Mg, 43Ca) were also evaluated as potential internal standards. The analytical performance parameters and microwave digestion of solid standards followed by solution nebulization ICP-MS analysis proved that both calibration methods are fit for their intended purpose. The LA-ICP-MS analysis on the surface of tissues after the implantation process revealed an elevated content of elements in comparison to the control group. Analytes are distributed inhomogeneously and display local maximal content of Ti up to ca. 900 μg g- 1, Al up to ca. 760 μg g- 1 and for V up to 160 μg g- 1.

Standards for data acquisition and software-based analysis of in vivo electroencephalography recordings from animals. A TASK1-WG5 report of the AES/ILAE Translational Task Force of the ILAE.

PubMed

Moyer, Jason T; Gnatkovsky, Vadym; Ono, Tomonori; Otáhal, Jakub; Wagenaar, Joost; Stacey, William C; Noebels, Jeffrey; Ikeda, Akio; Staley, Kevin; de Curtis, Marco; Litt, Brian; Galanopoulou, Aristea S

2017-11-01

Electroencephalography (EEG)-the direct recording of the electrical activity of populations of neurons-is a tremendously important tool for diagnosing, treating, and researching epilepsy. Although standard procedures for recording and analyzing human EEG exist and are broadly accepted, there are no such standards for research in animal models of seizures and epilepsy-recording montages, acquisition systems, and processing algorithms may differ substantially among investigators and laboratories. The lack of standard procedures for acquiring and analyzing EEG from animal models of epilepsy hinders the interpretation of experimental results and reduces the ability of the scientific community to efficiently translate new experimental findings into clinical practice. Accordingly, the intention of this report is twofold: (1) to review current techniques for the collection and software-based analysis of neural field recordings in animal models of epilepsy, and (2) to offer pertinent standards and reporting guidelines for this research. Specifically, we review current techniques for signal acquisition, signal conditioning, signal processing, data storage, and data sharing, and include applicable recommendations to standardize collection and reporting. We close with a discussion of challenges and future opportunities, and include a supplemental report of currently available acquisition systems and analysis tools. This work represents a collaboration on behalf of the American Epilepsy Society/International League Against Epilepsy (AES/ILAE) Translational Task Force (TASK1-Workgroup 5), and is part of a larger effort to harmonize video-EEG interpretation and analysis methods across studies using in vivo and in vitro seizure and epilepsy models. Wiley Periodicals, Inc. © 2017 International League Against Epilepsy.

Chapter 23: International Standard reagents for harmonization of HPV serology and DNA assays--an update.

PubMed

Pagliusi, Sonia R; Dillner, Joakim; Pawlita, Michael; Quint, Wim G V; Wheeler, Cosette M; Ferguson, M

2006-08-31

International reference materials such as International Standard reagents facilitate quality assurance of essential biopharmaceutical products and related in vitro diagnostic tests. Standardization of antibody and DNA measurements and harmonization of laboratory procedures are key to the success of cancer prevention strategies through screening methods as well as for development and implementation of vaccination against the human papillomavirus (HPV). The WHO supported the preparation and initial analysis of a panel of candidate serological and DNA reference reagents aimed at facilitating inter-laboratory comparisons and detection of HPV worldwide. Two international collaborative studies assessed the performance of various HPV antibody and HPV-DNA detection assays and examined the feasibility of generating HPV antibody and DNA standard reagents. These studies showed that improvement in performance and comparability of assays is urgently needed and that the use of the same International Standard reference reagent could significantly improve performance and comparability. It is hoped that the establishment of International Units and International Standards for HPV antibody and DNA analysis will be pursued with high priority.

Development of a general method for quantifying IgG-based therapeutic monoclonal antibodies in human plasma using protein G purification coupled with a two internal standard calibration strategy using LC-MS/MS.

PubMed

Chiu, Huai-Hsuan; Liao, Hsiao-Wei; Shao, Yu-Yun; Lu, Yen-Shen; Lin, Ching-Hung; Tsai, I-Lin; Kuo, Ching-Hua

2018-08-17

Monoclonal antibody (mAb) drugs have generated much interest in recent years for treating various diseases. Immunoglobulin G (IgG) represents a high percentage of mAb drugs that have been approved by the Food and Drug Administration (FDA). To facilitate therapeutic drug monitoring and pharmacokinetic/pharmacodynamic studies, we developed a general liquid chromatography-tandem mass spectrometry (LC-MS/MS) method to quantify the concentration of IgG-based mAbs in human plasma. Three IgG-based drugs (bevacizumab, nivolumab and pembrolizumab) were selected to demonstrate our method. Protein G beads were used for sample pretreatment due to their universal ability to trap IgG-based drugs. Surrogate peptides that were obtained after trypsin digestion were quantified by using LC-MS/MS. To calibrate sample preparation errors and matrix effects that occur during LC-MS/MS analysis, we used two internal standards (IS) method that include the IgG-based drug-IS tocilizumab and post-column infused IS. Using two internal standards was found to effectively improve quantification accuracy, which was within 15% for all mAb drugs that were tested at three different concentrations. This general method was validated in term of its precision, accuracy, linearity and sensitivity for 3 demonstration mAb drugs. The successful application of the method to clinical samples demonstrated its' applicability in clinical analysis. It is anticipated that this general method could be applied to other mAb-based drugs for use in precision medicine and clinical studies. Copyright © 2018 Elsevier B.V. All rights reserved.

Multilevel Linkages between State Standards, Teacher Standards, and Student Achievement: Testing External versus Internal Standards-Based Education Models

ERIC Educational Resources Information Center

Lee, Jaekyung; Liu, Xiaoyan; Amo, Laura Casey; Wang, Weichun Leilani

2014-01-01

Drawing on national and state assessment datasets in reading and math, this study tested "external" versus "internal" standards-based education models. The goal was to understand whether and how student performance standards work in multilayered school systems under No Child Left Behind Act of 2001 (NCLB). Under the…

The European Glaucoma Society Glaucocard project: improved digital documentation of medical data for glaucoma patients based on standardized structured international datasets.

PubMed

Schargus, Marc; Grehn, Franz; Glaucocard Workgroup

2008-12-01

To evaluate existing international IT-based ophthalmological medical data projects, and to define a glaucoma data set based on existing international standards of medical and ophthalmological documentation. To develop the technical environment for easy data mining and data exchange in different countries in Europe. Existing clinical and IT-based projects for documentation of medical data in general medicine and ophthalmology were analyzed to create new data sets for medical documentation in glaucoma patients. Different types of data transfer methods were evaluated to find the best method of data exchange between ophthalmologists in different European countries. Data sets from existing IT projects showed a wide variability in specifications, use of codes, terms and graphical data (perimetry, optic nerve analysis etc.) in glaucoma patients. New standardized digital datasets for glaucoma patients were defined, based on existing standards, which can be used by general ophthalmologists for follow-up examinations and for glaucoma specialists to perform teleconsultation, also across country borders. Datasets are available in different languages. Different types of data exchange methods using secure medical data transfer by internet, USB stick and smartcard were tested for different countries with regard to legal acceptance, practicability and technical realization (e.g. compatibility with EMR systems). By creating new standardized glaucoma specific cross-national datasets, it is now possible to develop an electronic glaucoma patient record system for data storage and transfer based on internet, smartcard or USB stick. The digital data can be used for referrals and for teleconsultation of glaucoma specialists in order to optimize glaucoma treatment. This should lead to an increase of quality in glaucoma care, and prevent expenses in health care costs by unnecessary repeated examinations.

Internal Standards: A Source of Analytical Bias For Volatile Organic Analyte Determinations

EPA Science Inventory

The use of internal standards in the determination of volatile organic compounds as described in SW-846 Method 8260C introduces a potential for bias in results once the internal standards (ISTDs) are added to a sample for analysis. The bias is relative to the dissimilarity betw...

Music-based interventions to reduce internalizing symptoms in children and adolescents: A meta-analysis.

PubMed

Geipel, Josephine; Koenig, Julian; Hillecke, Thomas K; Resch, Franz; Kaess, Michael

2018-01-01

Existing systematic reviews provide evidence that music therapy is an effective intervention in the treatment of children and adolescents with psychopathology. The objective of the present review was to systematically review and quantify the effects of music-based interventions in reducing internalizing symptoms (i.e., depression and anxiety) in children and adolescents using a meta-analytical approach. Databases and journals were systematically screened for studies eligible for inclusion in meta-analysis on the effects of music-based interventions in reducing internalizing symptoms. A random-effect meta-analysis using standardized mean differences (SMD) was conducted. Five studies were included. Analysis of data from (randomized) controlled trials, yielded a significant main effect (Hedge's g = -0.73; 95%CI [-1.42;-0.04], Z = 2.08, p = 0.04, k = 5), indicating a greater reduction of internalizing symptoms in youth receiving music-based interventions (n = 100) compared to different control group interventions (n = 95). The existing evidence is limited to studies of low power and methodological quality. Included studies were highly heterogeneous with respect to the nature of the intervention, the measurements applied, the samples studied, and the study design. Findings indicate that music-based interventions may be efficient in reducing the severity of internalizing symptoms in children and adolescents. While these results are encouraging with respect to the application of music-based intervention, rigorous research is necessary to replicate existing findings and provide a broader base of evidence. More research adopting well controlled study designs of high methodological quality is needed. Copyright © 2017 Elsevier B.V. All rights reserved.

CTEPP STANDARD OPERATING PROCEDURE FOR PREPARATION OF SURROGATE RECOVERY STANDARD AND INTERNAL STANDARD SOLUTIONS FOR POLAR TARGET ANALYTES (SOP-5.26)

EPA Science Inventory

This SOP describes the method used for preparing surrogate recovery standard and internal standard solutions for the analysis of polar target analytes. It also describes the method for preparing calibration standard solutions for polar analytes used for gas chromatography/mass sp...

Implementation of evidence-based humanitarian programs in military-led missions: part I. Qualitative gap analysis of current military and international aid programs.

PubMed

Reaves, Erik J; Schor, Kenneth W; Burkle, Frederick M

2008-12-01

A recent Department of Defense instruction mandates country-specific assessments, identification of interventions, and development of guidance for Department of Defense to plan, train, and prepare for the provision of humanitarian assistance in stability operations. It also directs the use of outcome-based measures of effectiveness and the establishment of processes facilitating transparency of information. Whereas this would align military-led projects closer to the standards of the international aid community, how this process will be developed and implemented within the military has not yet been determined. To begin developing an evidence-based program for military-led humanitarian aid, we conducted a qualitative gap analysis comparing information from a Web search of Department of Defense medical after-action reports, lessons learned, and expert interviews with the internationally accepted standards in humanitarian assistance impact assessment. There is a major gap in the ability of the Department of Defense to assess the impact of humanitarian assistance in stability operations compared with international development standards. Of the 1000 Department of Defense after-action reports and lessons learned reviewed, only 7 (0.7%) reports refer to, but do not discuss, impact assessment or outcome-based measures of effectiveness. This investigation shows that the Department of Defense humanitarian assistance operations are, historically, recorded without documentation using quantifiable health data identifying which aid activities contributed directly to desired outcomes or favorable public opinion, and rarely are analyzed for effectiveness. As humanitarian assistance operations assume an ever greater role in US military strategy, it is imperative that we investigate useful impact assessment models to meet mission directives and, more important, to maximize coordination in a necessarily integrated and cooperative development environment. These findings provide baseline knowledge for the implementation of an evidence-based impact assessment process to validate future Department of Defense humanitarian assistance operations.

Discourse Surrounding the International Education Standards for Professional Accountants (IES): A Content Analysis Approach

ERIC Educational Resources Information Center

Sugahara, Satoshi; Wilson, Rachel

2013-01-01

The development and implementation of the International Education Standards (IES) for professional accountants is currently an important issue in accounting education and for educators interested in a shift toward international education standards more broadly. The purpose of this study is to investigate professional and research discourse…

International Standardization of Bed Rest Standard Measures

NASA Technical Reports Server (NTRS)

Cromwell, Ronita L.

2010-01-01

This slide presentation gives an overview of the standardization of bed rest measures. The International Countermeasures Working Group attempted to define and agree internationally on standard measurements for spaceflight based bed rest studies. The group identified the experts amongst several stakeholder agencys. It included information on exercise, muscle, neurological, psychological, bone and cardiovascular measures.

Current situation of International Organization for Standardization/Technical Committee 249 international standards of traditional Chinese medicine.

PubMed

Liu, Yu-Qi; Wang, Yue-Xi; Shi, Nan-Nan; Han, Xue-Jie; Lu, Ai-Ping

2017-05-01

To review the current situation and progress of traditional Chinese medicine (TCM) international standards, standard projects and proposals in International Organization for Standardization (ISO)/ technical committee (TC) 249. ISO/TC 249 standards and standard projects on the ISO website were searched and new standard proposals information were collected from ISO/TC 249 National Mirror Committee in China. Then all the available data were summarized in 5 closely related items, including proposed time, proposed country, assigned working group (WG), current stage and classifification. In ISO/TC 249, there were 2 international standards, 18 standard projects and 24 new standard proposals proposed in 2014. These 44 standard subjects increased year by year since 2011. Twenty-nine of them were proposed by China, 15 were assigned to WG 4, 36 were in preliminary and preparatory stage and 8 were categorized into 4 fifields, 7 groups and sub-groups based on International Classifification Standards. A rapid and steady development of international standardization in TCM can be observed in ISO/TC 249.

Distribution of the two-sample t-test statistic following blinded sample size re-estimation.

PubMed

Lu, Kaifeng

2016-05-01

We consider the blinded sample size re-estimation based on the simple one-sample variance estimator at an interim analysis. We characterize the exact distribution of the standard two-sample t-test statistic at the final analysis. We describe a simulation algorithm for the evaluation of the probability of rejecting the null hypothesis at given treatment effect. We compare the blinded sample size re-estimation method with two unblinded methods with respect to the empirical type I error, the empirical power, and the empirical distribution of the standard deviation estimator and final sample size. We characterize the type I error inflation across the range of standardized non-inferiority margin for non-inferiority trials, and derive the adjusted significance level to ensure type I error control for given sample size of the internal pilot study. We show that the adjusted significance level increases as the sample size of the internal pilot study increases. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Quality assessment of Herba Leonuri based on the analysis of multiple components using normal- and reversed-phase chromatographic methods.

PubMed

Dong, Shuya; He, Jiao; Hou, Huiping; Shuai, Yaping; Wang, Qi; Yang, Wenling; Sun, Zheng; Li, Qing; Bi, Kaishun; Liu, Ran

2017-12-01

A novel, improved, and comprehensive method for quality evaluation and discrimination of Herba Leonuri has been developed and validated based on normal- and reversed-phase chromatographic methods. To identify Herba Leonuri, normal- and reversed-phase high-performance thin-layer chromatography fingerprints were obtained by comparing the colors and R f values of the bands, and reversed-phase high-performance liquid chromatography fingerprints were obtained by using an Agilent Poroshell 120 SB-C18 within 28 min. By similarity analysis and hierarchical clustering analysis, we show that there are similar chromatographic patterns in Herba Leonuri samples, but significant differences in counterfeits and variants. To quantify the bio-active components of Herba Leonuri, reversed-phase high-performance liquid chromatography was performed to analyze syringate, leonurine, quercetin-3-O-robiniaglycoside, hyperoside, rutin, isoquercitrin, wogonin, and genkwanin simultaneously by single standard to determine multi-components method with rutin as internal standard. Meanwhile, normal-phase high-performance liquid chromatography was performed by using an Agilent ZORBAX HILIC Plus within 6 min to determine trigonelline and stachydrine using trigonelline as internal standard. Innovatively, among these compounds, bio-active components of quercetin-3-O-robiniaglycoside and trigonelline were first determined in Herba Leonuri. In general, the method integrating multi-chromatographic analyses offered an efficient way for the standardization and identification of Herba Leonuri. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The estimation of the measurement results with using statistical methods

NASA Astrophysics Data System (ADS)

Velychko, O.; Gordiyenko, T.

2015-02-01

The row of international standards and guides describe various statistical methods that apply for a management, control and improvement of processes with the purpose of realization of analysis of the technical measurement results. The analysis of international standards and guides on statistical methods estimation of the measurement results recommendations for those applications in laboratories is described. For realization of analysis of standards and guides the cause-and-effect Ishikawa diagrams concerting to application of statistical methods for estimation of the measurement results are constructed.

Definition of criteria and indicators for the prevention of Healthcare-Associated Infections (HAIs) in hospitals for the purposes of Italian institutional accreditation and performance monitoring.

PubMed

Tardivo, S; Moretti, F; Nobile, M; Agodi, A; Appignanesi, R; Arrigoni, C; Baldovin, T; Brusaferro, S; Canino, R; Carli, A; Chiesa, R; D'Alessandro, D; D'Errico, M M; Giuliani, G; Montagna, M T; Moro, M; Mura, I I; Novati, R; Orsi, G B; Pasquarella, C; Privitera, G; Ripabelli, G; Rossini, A; Saia, M; Sodano, L; Torregrossa, M V; Torri, E; Zarrilli, R; Auxilia, F; SItI, Gisio

2017-01-01

Healthcare-associated infections (HAIs) are an important issue in terms of quality of care. HAIs impact patient safety by contributing to higher rates of preventable mortality and prolonged hospitalizations. In Italy, analysis of the currently available accreditation systems shows a substantial heterogeneity of approaches for the prevention and surveillance of HAIs in hospitals. The aim of the present study is to develop and propose the use of a synthetic assessment tool that could be implemented homogenously throughout the nation. An analysis of nine international and of the 21 Italian regional accreditation systems was conducted in order to identify requirements and indicators implemented for HAI prevention and control. Two relevant reviews on this topic were further analyzed to identify additional evidence-based criteria. The project team evaluated all the requirements and indicators with consensus meeting methodology, then those applicable to the Italian context were grouped into a set of "focus areas". The analysis of international systems and Italian regional accreditation manuals led to the identification respectively of 19 and 14 main requirements, with relevant heterogeneity in their application. Additional evidence-based criteria were included from the reviews analysis. From the consensus among the project team members all the standards were compared and 20 different thematic areas were identified, with a total of 96 requirements and indicators for preventing and monitoring HAIs. The study reveals a great heterogeneity in the definition of accreditation criteria between the Italian regions. The introduction of a uniform, synthetic assessment instrument, based on the review of national and international standards, may serve as a self-assessment tool to evaluate the achievement of a minimum standards set for HAIs prevention and control in healthcare facilities. This may be used as an assessment tool by the Italian institutional accreditation system, also useful to reduce regional disparities.

Fibrinolysis standards: a review of the current status.

PubMed

Thelwell, C

2010-07-01

Biological standards are used to calibrate measurements of components of the fibrinolytic system, either for assigning potency values to therapeutic products, or to determine levels in human plasma as an indicator of thrombotic risk. Traditionally WHO International Standards are calibrated in International Units based on consensus values from collaborative studies. The International Unit is defined by the response activity of a given amount of the standard in a bioassay, independent of the method used. Assay validity is based on the assumption that both standard and test preparation contain the same analyte, and the response in an assay is a true function of this analyte. This principle is reflected in the diversity of source materials used to prepare fibrinolysis standards, which has depended on the contemporary preparations they were employed to measure. With advancing recombinant technology, and improved analytical techniques, a reference system based on reference materials and associated reference methods has been recommended for future fibrinolysis standards. Careful consideration and scientific judgement must however be applied when deciding on an approach to develop a new standard, with decisions based on the suitability of a standard to serve its purpose, and not just to satisfy a metrological ideal. 2010 The International Association for Biologicals. Published by Elsevier Ltd. All rights reserved.

The Second International Standard for Penicillin*

PubMed Central

Humphrey, J. H.; Mussett, M. V.; Perry, W. L. M.

1953-01-01

In 1950 the Department of Biological Standards, National Institute for Medical Research, London, was authorized by the WHO Expert Committee on Biological Standardization to prepare the Second International Standard for Penicillin. A single batch of specially recrystallized sodium penicillin G was obtained and 11 laboratories in seven different countries were requested to take part in its collaborative assay. 112 assays were carried out, of which 101 were done by cup-plate methods using either Staphylococcus aureus or Bacillus subtilis. The results were subjected to standard methods of analysis, on the basis of which the authors define the Second International Standard for Penicillin as containing 1,670 International Units (IU) per mg, with limits of error (P = 0.05) of 1,666-1,674 IU/mg. The International Unit is therefore redefined as the activity contained in 0.0005988 mg of the Second International Standard for Penicillin. PMID:13082387

Genomic Sequence Variation Markup Language (GSVML).

PubMed

Nakaya, Jun; Kimura, Michio; Hiroi, Kaei; Ido, Keisuke; Yang, Woosung; Tanaka, Hiroshi

2010-02-01

With the aim of making good use of internationally accumulated genomic sequence variation data, which is increasing rapidly due to the explosive amount of genomic research at present, the development of an interoperable data exchange format and its international standardization are necessary. Genomic Sequence Variation Markup Language (GSVML) will focus on genomic sequence variation data and human health applications, such as gene based medicine or pharmacogenomics. We developed GSVML through eight steps, based on case analysis and domain investigations. By focusing on the design scope to human health applications and genomic sequence variation, we attempted to eliminate ambiguity and to ensure practicability. We intended to satisfy the requirements derived from the use case analysis of human-based clinical genomic applications. Based on database investigations, we attempted to minimize the redundancy of the data format, while maximizing the data covering range. We also attempted to ensure communication and interface ability with other Markup Languages, for exchange of omics data among various omics researchers or facilities. The interface ability with developing clinical standards, such as the Health Level Seven Genotype Information model, was analyzed. We developed the human health-oriented GSVML comprising variation data, direct annotation, and indirect annotation categories; the variation data category is required, while the direct and indirect annotation categories are optional. The annotation categories contain omics and clinical information, and have internal relationships. For designing, we examined 6 cases for three criteria as human health application and 15 data elements for three criteria as data formats for genomic sequence variation data exchange. The data format of five international SNP databases and six Markup Languages and the interface ability to the Health Level Seven Genotype Model in terms of 317 items were investigated. GSVML was developed as a potential data exchanging format for genomic sequence variation data exchange focusing on human health applications. The international standardization of GSVML is necessary, and is currently underway. GSVML can be applied to enhance the utilization of genomic sequence variation data worldwide by providing a communicable platform between clinical and research applications. Copyright 2009 Elsevier Ireland Ltd. All rights reserved.

[Differences and international standardization between acupuncture as therapy and as specialty].

PubMed

Ng, Szetuen

2017-01-12

The purpose of this study is to explore the differences of definition and clinical roles as well as international standardization between acupuncture as therapy and as specialty, which can provide reference evidence for specialization and internationalization of acupuncture. Owing to the clinical efficacy and safety, the credibility and controversy both exist in acupuncture; moreover, there is a lack of fair definition and international precedent regarding acupuncture specialty. Therefore, it is particularly essential to objectively compare the differences of definitions and clinical roles as well as criteria of international standardization for acupuncture as therapy and as specialty. It is believed acupuncture standardization can draw lessons from the international medical standards, evidence-based medicine and acupuncture theory from the following three major projects:acupuncture safety and contraindications; acupuncture indications and treatment guidelines; acupuncture indication classified into 3 levels of evidence-based acupuncture disease spectrum, as objective evidence of indication of acupuncture specialty.

Approach for Self-Calibrating CO2 Measurements with Linear Membrane-Based Gas Sensors

PubMed Central

Lazik, Detlef; Sood, Pramit

2016-01-01

Linear membrane-based gas sensors that can be advantageously applied for the measurement of a single gas component in large heterogeneous systems, e.g., for representative determination of CO2 in the subsurface, can be designed depending on the properties of the observation object. A resulting disadvantage is that the permeation-based sensor response depends on operating conditions, the individual site-adapted sensor geometry, the membrane material, and the target gas component. Therefore, calibration is needed, especially of the slope, which could change over several orders of magnitude. A calibration-free approach based on an internal gas standard is developed to overcome the multi-criterial slope dependency. This results in a normalization of sensor response and enables the sensor to assess the significance of measurement. The approach was proofed on the example of CO2 analysis in dry air with tubular PDMS membranes for various CO2 concentrations of an internal standard. Negligible temperature dependency was found within an 18 K range. The transformation behavior of the measurement signal and the influence of concentration variations of the internal standard on the measurement signal were shown. Offsets that were adjusted based on the stated theory for the given measurement conditions and material data from the literature were in agreement with the experimentally determined offsets. A measurement comparison with an NDIR reference sensor shows an unexpectedly low bias (<1%) of the non-calibrated sensor response, and comparable statistical uncertainty. PMID:27869656

Standard-less analysis of Zircaloy clad samples by an instrumental neutron activation method

NASA Astrophysics Data System (ADS)

Acharya, R.; Nair, A. G. C.; Reddy, A. V. R.; Goswami, A.

2004-03-01

A non-destructive method for analysis of irregular shape and size samples of Zircaloy has been developed using the recently standardized k0-based internal mono standard instrumental neutron activation analysis (INAA). The samples of Zircaloy-2 and -4 tubes, used as fuel cladding in Indian boiling water reactors (BWR) and pressurized heavy water reactors (PHWR), respectively, have been analyzed. Samples weighing in the range of a few tens of grams were irradiated in the thermal column of Apsara reactor to minimize neutron flux perturbations and high radiation dose. The method utilizes in situ relative detection efficiency using the γ-rays of selected activation products in the sample for overcoming γ-ray self-attenuation. Since the major and minor constituents (Zr, Sn, Fe, Cr and/or Ni) in these samples were amenable to NAA, the absolute concentrations of all the elements were determined using mass balance instead of using the concentration of the internal mono standard. Concentrations were also determined in a smaller size Zircaloy-4 sample by irradiating in the core position of the reactor to validate the present methodology. The results were compared with literature specifications and were found to be satisfactory. Values of sensitivities and detection limits have been evaluated for the elements analyzed.

Face recognition using slow feature analysis and contourlet transform

NASA Astrophysics Data System (ADS)

Wang, Yuehao; Peng, Lingling; Zhe, Fuchuan

2018-04-01

In this paper we propose a novel face recognition approach based on slow feature analysis (SFA) in contourlet transform domain. This method firstly use contourlet transform to decompose the face image into low frequency and high frequency part, and then takes technological advantages of slow feature analysis for facial feature extraction. We named the new method combining the slow feature analysis and contourlet transform as CT-SFA. The experimental results on international standard face database demonstrate that the new face recognition method is effective and competitive.

Valid internal standard technique for arson detection based on gas chromatography-mass spectrometry.

PubMed

Salgueiro, Pedro A S; Borges, Carlos M F; Bettencourt da Silva, Ricardo J N

2012-09-28

The most popular procedures for the detection of residues of accelerants in fire debris are the ones published by the American Society for Testing and Materials (ASTM E1412-07 and E1618-10). The most critical stages of these tests are the conservation of fire debris from the sampling to the laboratory, the extraction of residues of accelerants from the debris to the activated charcoal strips (ACS) and from those to the final solvent, as well as the analysis of sample extract by gas chromatography-mass spectrometry (GC-MS) and the interpretation of the instrumental signal. This work proposes a strategy for checking the quality of the sample conservation, the accelerant residues transference to final solvent and GC-MS analysis, using internal standard additions. It is used internal standards ranging from a highly volatile compound for checking debris conservation to low volatile compound for checking GC-MS repeatability. The developed quality control (QC) parameters are not affected by GC-MS sensitivity variation and, specifically, the GC-MS performance control is not affected by ACS adsorption saturation that may mask test performance deviations. The proposed QC procedure proved to be adequate to check GC-MS repeatability, ACS extraction and sample conservation since: (1) standard additions are affected by negligible uncertainty and (2) observed dispersion of QC parameters are fit for its intended use. Copyright © 2012 Elsevier B.V. All rights reserved.

Competency frameworks for advanced practice nursing: a literature review.

PubMed

Sastre-Fullana, P; De Pedro-Gómez, J E; Bennasar-Veny, M; Serrano-Gallardo, P; Morales-Asencio, J M

2014-12-01

This paper describes a literature review that identified common traits in advanced practice nursing that are specific to competency development worldwide. There is a lack of international agreement on the definition of advanced practice nursing and its core competencies. Despite the lack of consensus, there is an ongoing process worldwide to establish and outline the standards and competencies for advanced practice nursing roles. International agencies, such as the International Council of Nurses, have provided general definitions for advanced practice nursing. Additionally, a set of competency standards for this aim has been developed. A literature review and a directed search of institutional websites were performed to identify specific developments in advanced practice nursing competencies and standards of practice. To determine a competency map specific to international advanced practice nursing, key documents were analysed using a qualitative approach based on content analysis to identify common traits among documents and countries. The review process identified 119 relevant journal articles related to advanced practice nursing competencies. Additionally, 97 documents from grey literature that were related to advanced practice nursing competency mapping were identified. From the text analysis, 17 worldwide transversal competency domains emerged. Despite the variety of patterns in international advanced practice nursing development, essential competency domains can be found in most national frameworks for the role development of international advanced practice nursing. These 17 core competencies can be used to further develop instruments that assess the perceived competency of advanced practice nurses. The results of this review can help policy developers and researchers develop instruments to compare advanced practice nursing services in various contexts and to examine their association with related outcomes. © 2014 International Council of Nurses.

[Regulatory assessment of the "Nutrición Hospitalaria" journal].

PubMed

Iglesias Vázquez, E; Culebras, J M; García de Lorenzo, A

2000-01-01

A study is carried out to determine the degree of compliance by the journal entitled "Nutrición Hospitalaria" with the international standards issued by the ISO (International Standards Organization) by means of the application of a survey questionnaire drawn up in accordance with the guidelines published by national and international standards organizations. In total, 161 parameters are considered. Together with the general aspects of the publication, an analysis is made of its specific sections, decisive in the establishment of its level of compliance. After the analysis carried out, it was seen that the general standardization mean was 64% and the real average was 76.82%. At the same time, the necessary recommendations are given to improve these standardization levels and improve the editorial quality of "Nutrición Hospitalaria".

[Standard of integration management at company level and its auditing].

PubMed

Flach, T; Hetzel, C; Mozdzanowski, M; Schian, H-M

2006-10-01

Responsibility at company level for the employment of workers with health-related problems or disabilities has increased, inter alia because of integration management at company level according to section 84 (2) of the German Social Code Book IX. Although several recommendations exist, no standard is available for auditing and certification. Such a standard could be a basis for granting premiums according to section 84 (3) of Book IX of the German Social Code. AUDIT AND CERTIFICATION: One product of the international "disability management" movement is the "Consensus Based Disability Management Audit" (CBDMA). The Audit is a systematic and independent measurement of the effectiveness of integration management at company level. CBDMA goals are to give evidence of the quality of the integration management implemented, to identify opportunities for improvement and recommend appropriate corrective and preventive action. In May 2006, the integration management of Ford-Werke GmbH Germany with about 23 900 employees was audited and certified as the first company in Europe. STANDARD OF INTEGRATION MANAGEMENT AT COMPANY LEVEL: In dialogue with corporate practitioners, the international standard of CBDMA has been adapted, completed and verified concerning its practicability. Process orientation is the key approach, and the structure is similar to DIN EN ISO 9001:2000. Its structure is as follows: (1) management-labour responsibility (goals and objectives, program planning, management-labour review), (2) management of resources (disability manager and DM team, employees' participation, cooperation with external partners, infrastructure), (3) communication (internal and external public relations), (4) case management (identifying cases, contact, situation analysis, planning actions, implementing actions and monitoring, process and outcome evaluation), (5) analysis and improvement (analysis and program evaluation), (6) documentation (manual, records).

The International Standard for Oxytetracycline

PubMed Central

Humphrey, J. H.; Lightbown, J. W.; Mussett, M. V.; Perry, W. L. M.

1955-01-01

The first attempt to set up an international standard for oxytetracycline, using oxytetracycline hydrochloride, failed because of difficulties in obtaining a preparation whose moisture content was uniform after distribution into ampoules. A preparation of dihydrate of oxytetracycline base was obtained instead, and was compared in an international collaborative assay with a sample of oxytetracycline hydrochloride, which was the current working standard of Chas. Pfizer & Co., Inc., USA. The results of the collaborative assay showed that the potency of the dihydrate was uniform, and that it was a suitable preparation for use as the International Standard. Evidence was obtained, however, that the reference preparation at the time of examination was less potent than had been originally supposed, and that it was hydrated. The potency of the proposed international standard was recalculated after allowance for water in the reference preparation, and the resulting biological potency agreed well with that to be expected on the basis of the physicochemical properties of the preparation. It was agreed, therefore, that the recalculated values should be used, and the preparation of oxytetracycline base dihydrate used in the collaborative assay is established as the International Standard for Oxytetracycline with a potency of 900 International Units per mg. PMID:13284563

Laser-induced breakdown spectroscopy (LIBS) analysis of calcium ions dissolved in water using filter paper substrates: an ideal internal standard for precision improvement.

PubMed

Choi, Daewoong; Gong, Yongdeuk; Nam, Sang-Ho; Han, Song-Hee; Yoo, Jonghyun; Lee, Yonghoon

2014-01-01

We report an approach for selecting an internal standard to improve the precision of laser-induced breakdown spectroscopy (LIBS) analysis for determining calcium (Ca) concentration in water. The dissolved Ca(2+) ions were pre-concentrated on filter paper by evaporating water. The filter paper was dried and analyzed using LIBS. By adding strontium chloride to sample solutions and using a Sr II line at 407.771 nm for the intensity normalization of Ca II lines at 393.366 or 396.847 nm, the analysis precision could be significantly improved. The Ca II and Sr II line intensities were mapped across the filter paper, and they showed a strong positive shot-to-shot correlation with the same spatial distribution on the filter paper surface. We applied this analysis approach for the measurement of Ca(2+) in tap, bottled, and ground water samples. The Ca(2+) concentrations determined using LIBS are in good agreement with those obtained from flame atomic absorption spectrometry. Finally, we suggest a homologous relation of the strongest emission lines of period 4 and 5 elements in groups IA and IIA based on their similar electronic structures. Our results indicate that the LIBS can be effectively applied for liquid analysis at the sub-parts per million level with high precision using a simple drying of liquid solutions on filter paper and the use of the correct internal standard elements with the similar valence electronic structure with respect to the analytes of interest.

A Calibration-Free Laser-Induced Breakdown Spectroscopy (CF-LIBS) Quantitative Analysis Method Based on the Auto-Selection of an Internal Reference Line and Optimized Estimation of Plasma Temperature.

PubMed

Yang, Jianhong; Li, Xiaomeng; Xu, Jinwu; Ma, Xianghong

2018-01-01

The quantitative analysis accuracy of calibration-free laser-induced breakdown spectroscopy (CF-LIBS) is severely affected by the self-absorption effect and estimation of plasma temperature. Herein, a CF-LIBS quantitative analysis method based on the auto-selection of internal reference line and the optimized estimation of plasma temperature is proposed. The internal reference line of each species is automatically selected from analytical lines by a programmable procedure through easily accessible parameters. Furthermore, the self-absorption effect of the internal reference line is considered during the correction procedure. To improve the analysis accuracy of CF-LIBS, the particle swarm optimization (PSO) algorithm is introduced to estimate the plasma temperature based on the calculation results from the Boltzmann plot. Thereafter, the species concentrations of a sample can be calculated according to the classical CF-LIBS method. A total of 15 certified alloy steel standard samples of known compositions and elemental weight percentages were used in the experiment. Using the proposed method, the average relative errors of Cr, Ni, and Fe calculated concentrations were 4.40%, 6.81%, and 2.29%, respectively. The quantitative results demonstrated an improvement compared with the classical CF-LIBS method and the promising potential of in situ and real-time application.

Media Representations of National and International Standardized Testing in the Israeli Education System

ERIC Educational Resources Information Center

Yemini, Miri; Gordon, Noa

2017-01-01

This study applies discourse analysis to Israeli media coverage of national and international standardized examinations within Israel's public education system. Through systematic analysis of the topic in the two main Israeli financial publications between the years 2000 and 2013, we explore the nature and narrative of the media and compare the…

Reliable LC-MS quantitative glycomics using iGlycoMab stable isotope labeled glycans as internal standards.

PubMed

Zhou, Shiyue; Tello, Nadia; Harvey, Alex; Boyes, Barry; Orlando, Ron; Mechref, Yehia

2016-06-01

Glycans have numerous functions in various biological processes and participate in the progress of diseases. Reliable quantitative glycomic profiling techniques could contribute to the understanding of the biological functions of glycans, and lead to the discovery of potential glycan biomarkers for diseases. Although LC-MS is a powerful analytical tool for quantitative glycomics, the variation of ionization efficiency and MS intensity bias are influencing quantitation reliability. Internal standards can be utilized for glycomic quantitation by MS-based methods to reduce variability. In this study, we used stable isotope labeled IgG2b monoclonal antibody, iGlycoMab, as an internal standard to reduce potential for errors and to reduce variabililty due to sample digestion, derivatization, and fluctuation of nanoESI efficiency in the LC-MS analysis of permethylated N-glycans released from model glycoproteins, human blood serum, and breast cancer cell line. We observed an unanticipated degradation of isotope labeled glycans, tracked a source of such degradation, and optimized a sample preparation protocol to minimize degradation of the internal standard glycans. All results indicated the effectiveness of using iGlycoMab to minimize errors originating from sample handling and instruments. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Protein quantification using a cleavable reporter peptide.

PubMed

Duriez, Elodie; Trevisiol, Stephane; Domon, Bruno

2015-02-06

Peptide and protein quantification based on isotope dilution and mass spectrometry analysis are widely employed for the measurement of biomarkers and in system biology applications. The accuracy and reliability of such quantitative assays depend on the quality of the stable-isotope labeled standards. Although the quantification using stable-isotope labeled peptides is precise, the accuracy of the results can be severely biased by the purity of the internal standards, their stability and formulation, and the determination of their concentration. Here we describe a rapid and cost-efficient method to recalibrate stable isotope labeled peptides in a single LC-MS analysis. The method is based on the equimolar release of a protein reference peptide (used as surrogate for the protein of interest) and a universal reporter peptide during the trypsinization of a concatenated polypeptide standard. The quality and accuracy of data generated with such concatenated polypeptide standards are highlighted by the quantification of two clinically important proteins in urine samples and compared with results obtained with conventional stable isotope labeled reference peptides. Furthermore, the application of the UCRP standards in complex samples is described.

Iso standardization of theoretical activity evaluation method for low and intermediate level activated waste generated at nuclear power plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Makoto Kashiwagi; Garamszeghy, Mike; Lantes, Bertrand

Disposal of low-and intermediate-level activated waste generated at nuclear power plants is being planned or carried out in many countries. The radioactivity concentrations and/or total quantities of long-lived, difficult-to-measure nuclides (DTM nuclides), such as C-14, Ni-63, Nb-94, α emitting nuclides etc., are often restricted by the safety case for a final repository as determined by each country's safety regulations, and these concentrations or amounts are required to be known and declared. With respect to waste contaminated by contact with process water, the Scaling Factor method (SF method), which is empirically based on sampling and analysis data, has been applied asmore » an important method for determining concentrations of DTM nuclides. This method was standardized by the International Organization for Standardization (ISO) and published in 2007 as ISO21238 'Scaling factor method to determine the radioactivity of low and intermediate-level radioactive waste packages generated at nuclear power plants' [1]. However, for activated metal waste with comparatively high concentrations of radioactivity, such as may be found in reactor control rods and internal structures, direct sampling and radiochemical analysis methods to evaluate the DTM nuclides are limited by access to the material and potentially high personnel radiation exposure. In this case, theoretical calculation methods in combination with empirical methods based on remote radiation surveys need to be used to best advantage for determining the disposal inventory of DTM nuclides while minimizing exposure to radiation workers. Pursuant to this objective a standard for the theoretical evaluation of the radioactivity concentration of DTM nuclides in activated waste, is in process through ISO TC85/SC5 (ISO Technical Committee 85: Nuclear energy, nuclear technologies, and radiological protection; Subcommittee 5: Nuclear fuel cycle). The project team for this ISO standard was formed in 2011 and is composed of experts from 11 countries. The project team has been conducting technical discussions on theoretical methods for determining concentrations of radioactivity, and has developed the draft International Standard of ISO16966 'Theoretical activation calculation method to evaluate the radioactivity of activated waste generated at nuclear reactors' [2]. This paper describes the international standardization process developed by the ISO project team, and outlines the following two theoretical activity evaluation methods:? Point method? Range method. (authors)« less

Accurate determination of arsenic in arsenobetaine standard solutions of BCR-626 and NMIJ CRM 7901-a by neutron activation analysis coupled with internal standard method.

PubMed

Miura, Tsutomu; Chiba, Koichi; Kuroiwa, Takayoshi; Narukawa, Tomohiro; Hioki, Akiharu; Matsue, Hideaki

2010-09-15

Neutron activation analysis (NAA) coupled with an internal standard method was applied for the determination of As in the certified reference material (CRM) of arsenobetaine (AB) standard solutions to verify their certified values. Gold was used as an internal standard to compensate for the difference of the neutron exposure in an irradiation capsule and to improve the sample-to-sample repeatability. Application of the internal standard method significantly improved linearity of the calibration curve up to 1 microg of As, too. The analytical reliability of the proposed method was evaluated by k(0)-standardization NAA. The analytical results of As in AB standard solutions of BCR-626 and NMIJ CRM 7901-a were (499+/-55)mgkg(-1) (k=2) and (10.16+/-0.15)mgkg(-1) (k=2), respectively. These values were found to be 15-20% higher than the certified values. The between-bottle variation of BCR-626 was much larger than the expanded uncertainty of the certified value, although that of NMIJ CRM 7901-a was almost negligible. Copyright (c) 2010 Elsevier B.V. All rights reserved.

Interoperability in planetary research for geospatial data analysis

NASA Astrophysics Data System (ADS)

Hare, Trent M.; Rossi, Angelo P.; Frigeri, Alessandro; Marmo, Chiara

2018-01-01

For more than a decade there has been a push in the planetary science community to support interoperable methods for accessing and working with geospatial data. Common geospatial data products for planetary research include image mosaics, digital elevation or terrain models, geologic maps, geographic location databases (e.g., craters, volcanoes) or any data that can be tied to the surface of a planetary body (including moons, comets or asteroids). Several U.S. and international cartographic research institutions have converged on mapping standards that embrace standardized geospatial image formats, geologic mapping conventions, U.S. Federal Geographic Data Committee (FGDC) cartographic and metadata standards, and notably on-line mapping services as defined by the Open Geospatial Consortium (OGC). The latter includes defined standards such as the OGC Web Mapping Services (simple image maps), Web Map Tile Services (cached image tiles), Web Feature Services (feature streaming), Web Coverage Services (rich scientific data streaming), and Catalog Services for the Web (data searching and discoverability). While these standards were developed for application to Earth-based data, they can be just as valuable for planetary domain. Another initiative, called VESPA (Virtual European Solar and Planetary Access), will marry several of the above geoscience standards and astronomy-based standards as defined by International Virtual Observatory Alliance (IVOA). This work outlines the current state of interoperability initiatives in use or in the process of being researched within the planetary geospatial community.

Application and Survey of Business Intelligence (BI) Tools within the Context of Military Decision Making

DTIC Science & Technology

2012-06-01

International Financial Reporting Standards ( IFRS ) are principles-based Standards, Interpretations and the Framework (1989) adopted by the International...direction of the organization and based on a four- perspective view of the world: Financial measures supported by customer, internal, and learning and...scorecard applications, financial consolidation, and statutory and financial reporting . 27 7. Performance Scorecards and Dashboards Dashboards and

Phylogenetic Status of an Unrecorded Species of Curvularia, C. spicifera, Based on Current Classification System of Curvularia and Bipolaris Group Using Multi Loci.

PubMed

Jeon, Sun Jeong; Nguyen, Thi Thuong Thuong; Lee, Hyang Burm

2015-09-01

A seed-borne fungus, Curvularia sp. EML-KWD01, was isolated from an indigenous wheat seed by standard blotter method. This fungus was characterized based on the morphological characteristics and molecular phylogenetic analysis. Phylogenetic status of the fungus was determined using sequences of three loci: rDNA internal transcribed spacer, large ribosomal subunit, and glyceraldehyde 3-phosphate dehydrogenase gene. Multi loci sequencing analysis revealed that this fungus was Curvularia spicifera within Curvularia group 2 of family Pleosporaceae.

A Comprehensive Review of Spirit Drink Safety Standards and Regulations from an International Perspective.

PubMed

Pang, Xiao-Na; Li, Zhao-Jie; Chen, Jing-Yu; Gao, Li-Juan; Han, Bei-Zhong

2017-03-01

Standards and regulations related to spirit drinks have been established by different countries and international organizations to ensure the safety and quality of spirits. Here, we introduce the principles of food safety and quality standards for alcoholic beverages and then compare the key indicators used in the distinct standards of the Codex Alimentarius Commission, the European Union, the People's Republic of China, the United States, Canada, and Australia. We also discuss in detail the "maximum level" of the following main contaminants of spirit drinks: methanol, higher alcohols, ethyl carbamate, hydrocyanic acid, heavy metals, mycotoxins, phthalates, and aldehydes. Furthermore, the control measures used for potential hazards are introduced. Harmonization of the current requirements based on comprehensive scope analysis and the risk assessment approach will enhance both the trade and quality of distilled spirits. This review article provides valuable information that will enable producers, traders, governments, and researchers to increase their knowledge of spirit drink safety requirements, control measures, and research trends.

A Principles-Based Approach to Teaching International Financial Reporting Standards (IFRS)

ERIC Educational Resources Information Center

Persons, Obeua

2014-01-01

This article discusses the principles-based approach that emphasizes a "why" question by using the International Accounting Standards Board (IASB) "Conceptual Framework for Financial Reporting" to question and understand the basis for specific differences between IFRS and U.S. generally accepted accounting principles (U.S.…

International Standardization of Library and Documentation Techniques.

ERIC Educational Resources Information Center

International Federation for Documentation, The Hague (Netherlands).

This comparative study of the national and international standards, rules and regulations on library and documentation techniques adopted in various countries was conducted as a preliminary step in determining the minimal bases for facilitating national and international cooperation between documentalists and librarians. The study compares and…

The use of heart rate variability in assessing precompetitive stress in high-standard judo athletes.

PubMed

Morales, J; Garcia, V; García-Massó, X; Salvá, P; Escobar, R; Buscà, B

2013-02-01

The objective of this study is to examine the sensitivity to and changes in heart rate variability (HRV) in stressful situations before judo competitions and to observe the differences among judo athletes according to their competitive standards in both official and unofficial competitions. 24 (10 male and 14 female) national- and international-standard athletes were evaluated. Each participant answered the Revised Competitive State Anxiety Inventory (CSAI-2R) and their HRV was recorded both during an official and unofficial competition. The MANOVA showed significant main effects of the athlete's standard and the type of competition in CSAI-2R, in HRV time domain, in HRV frequency domain and in HRV nonlinear analysis (p<0.05). International-standard judo athletes have lower somatic anxiety, cognitive anxiety, heart rate and low-high frequency ratio than national-standard athletes (p<0.05). International-standard athletes have a higher confidence, mean RR interval, standard deviation of RR, square root of the mean squared difference of successive RR intervals, number of consecutive RR that differ by more than 5 ms, short-term variability, long-term variability, long-range scaling exponents and short-range scaling exponent than national-standard judo athletes. In conclusion, international-standard athletes show less pre-competitive anxiety than the national-standard athletes and HRV analysis is sensitive to changes in pre-competitive anxiety. © Georg Thieme Verlag KG Stuttgart · New York.

FRAN: financial ratio analysis and more (Version 2.0 for Windows)

Treesearch

Bruce G. Hansen; Arnold J., Jr. Palmer

1999-01-01

FRAN is a computer-based, stand-alone program designed to generate important financial and operating ratios from tax and wage forms filed with the Internal Revenue Service. FRAN generates standard profitability, financial/leverage, liquidity/solvency, and activity ratios, as well as unique measures of workforce and capital cost and acquisition. Information produced by...

Airside HVAC BESTEST: HVAC Air-Distribution System Model Test Cases for ASHRAE Standard 140

DOE Office of Scientific and Technical Information (OSTI.GOV)

Judkoff, Ronald; Neymark, Joel; Kennedy, Mike D.

This paper summarizes recent work to develop new airside HVAC equipment model analytical verification test cases for ANSI/ASHRAE Standard 140, Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs. The analytical verification test method allows comparison of simulation results from a wide variety of building energy simulation programs with quasi-analytical solutions, further described below. Standard 140 is widely cited for evaluating software for use with performance-path energy efficiency analysis, in conjunction with well-known energy-efficiency standards including ASHRAE Standard 90.1, the International Energy Conservation Code, and other international standards. Airside HVAC Equipment is a common area ofmore » modelling not previously explicitly tested by Standard 140. Integration of the completed test suite into Standard 140 is in progress.« less

An analysis of the New York State Earth Science Curriculum with respect to standards, classroom practices, and the Regents Examination

NASA Astrophysics Data System (ADS)

Contino, Julie Anna

In a standards-based system, it is important for all components of the system to align in order to achieve the intended goals. In New York State, standards are provided to the teachers who then create individual curricula that will lead to student success on the state assessment. This mixed methods study presents an analysis of the alignment between the National Science Education Standards (NSES), New York State Physical Setting/Earth Science Core Curriculum (Core Curriculum), and New York State Earth Science Regents Examination (Regents)---the sources teachers use for creating Earth Science curricula in New York State. The NSES were found to have a 49% overlap with the Core Curriculum and a 27% overlap with the Regents. The Core Curriculum and Regents, represented by matrices consisting of performance indicators and cognitive demands, were compared using the Porter alignment index. The alignment was 0.35, categorized as slightly aligned, due to the different emphases on cognitive levels (the Core Curriculum focused on Understand and Apply while the Regents focused on Apply followed by Understand and Remember). Additionally, a purposeful sample of experienced and innovative teachers were surveyed and interviewed to gain insight on how NYS Earth Science teachers organize their scope and sequences, align their lessons with the Core Curriculum, establish internal lesson coherence, and prepare their students for the Regents Exam. Teachers' scope and sequences were well-aligned with the Core Curriculum and Regents but misalignment was found between their lessons and the Core Curriculum as well as between the stated objectives for their students and evaluation of those objectives. Based on the findings, it is suggested that the NSES be revised and the Core Curriculum updated to include quantifiable emphasis on the major understandings such as percentage of time, as well as an emphasis on alignment principles. Teacher professional development focused on alignment issues relative to the state standards and enhancing internal lesson coherence should also be provided. The insights gained from this analysis of the NYS system may be helpful to other states as they move toward standards-based systems.

New Assignment of Mass Values and Uncertainties to NIST Working Standards

PubMed Central

Davis, Richard S.

1990-01-01

For some time it had been suspected that values assigned to NIST working standards of mass were some 0.17 mg/kg larger than mass values based on artifacts representing mass in the International System of Units (SI). This relatively small offset, now confirmed, has had minimal scientific or technological significance. The discrepancy was removed on January 1, 1990. We document the history of the discrepancy, the studies which allow its removal, and the methods in place to limit its effect and prevent its recurrence. For routine calibrations, we believe that our working standards now have a long-term stability of 0.033 mg/kg (3σ) with respect to the national prototype kilograms of the United States. We provisionally admit an additional uncertainty of 0.09 mg/kg (3σ), systematic to all NIST mass measurements, which represents the possible offset of our primary standards from standards maintained by the Bureau International des Poids et Mesures (BIPM). This systematic uncertainty may be significantly reduced after analysis of results from the 3rd verification of national prototype kilograms, which is now underway. PMID:28179759

Quantification of fructo-oligosaccharides based on the evaluation of oligomer ratios using an artificial neural network.

PubMed

Onofrejová, Lucia; Farková, Marta; Preisler, Jan

2009-04-13

The application of an internal standard in quantitative analysis is desirable in order to correct for variations in sample preparation and instrumental response. In mass spectrometry of organic compounds, the internal standard is preferably labelled with a stable isotope, such as (18)O, (15)N or (13)C. In this study, a method for the quantification of fructo-oligosaccharides using matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry (MALDI TOF MS) was proposed and tested on raftilose, a partially hydrolysed inulin with a degree of polymeration 2-7. A tetraoligosaccharide nystose, which is chemically identical to the raftilose tetramer, was used as an internal standard rather than an isotope-labelled analyte. Two mathematical approaches used for data processing, conventional calculations and artificial neural networks (ANN), were compared. The conventional data processing relies on the assumption that a constant oligomer dispersion profile will change after the addition of the internal standard and some simple numerical calculations. On the other hand, ANN was found to compensate for a non-linear MALDI response and variations in the oligomer dispersion profile with raftilose concentration. As a result, the application of ANN led to lower quantification errors and excellent day-to-day repeatability compared to the conventional data analysis. The developed method is feasible for MS quantification of raftilose in the range of 10-750 pg with errors below 7%. The content of raftilose was determined in dietary cream; application can be extended to other similar polymers. It should be stressed that no special optimisation of the MALDI process was carried out. A common MALDI matrix and sample preparation were used and only the basic parameters, such as sampling and laser energy, were optimised prior to quantification.

Conceptual Model of Quantities, Units, Dimensions, and Values

NASA Technical Reports Server (NTRS)

Rouquette, Nicolas F.; DeKoenig, Hans-Peter; Burkhart, Roger; Espinoza, Huascar

2011-01-01

JPL collaborated with experts from industry and other organizations to develop a conceptual model of quantities, units, dimensions, and values based on the current work of the ISO 80000 committee revising the International System of Units & Quantities based on the International Vocabulary of Metrology (VIM). By providing support for ISO 80000 in SysML via the International Vocabulary of Metrology (VIM), this conceptual model provides, for the first time, a standard-based approach for addressing issues of unit coherence and dimensional analysis into the practice of systems engineering with SysML-based tools. This conceptual model provides support for two kinds of analyses specified in the International Vocabulary of Metrology (VIM): coherence of units as well as of systems of units, and dimension analysis of systems of quantities. To provide a solid and stable foundation, the model for defining quantities, units, dimensions, and values in SysML is explicitly based on the concepts defined in VIM. At the same time, the model library is designed in such a way that extensions to the ISQ (International System of Quantities) and SI Units (Systeme International d Unites) can be represented, as well as any alternative systems of quantities and units. The model library can be used to support SysML user models in various ways. A simple approach is to define and document libraries of reusable systems of units and quantities for reuse across multiple projects, and to link units and quantity kinds from these libraries to Unit and QuantityKind stereotypes defined in SysML user models.

Replacement of the International Standard for Tetanus Antitoxin and the Use of the Standard in the Flocculation Test

PubMed Central

Spaun, J.; Lyng, J.

1970-01-01

Since 1935 the International Unit for Tetanus Antitoxin has been defined as the activity contained in a certain weight of the first International Standard for Tetanus Antitoxin. As stocks of this standard had become depleted, 11 laboratories in 8 countries were requested to participate in a collaborative assay of a preparation proposed as a replacement. The assay results were analysed and presented to the WHO Expert Committee on Biological Standardization in 1969 which established the preparation studied as the second International Standard for Tetanus Antitoxin and defined the International Unit for Tetanus Antitoxin as the activity contained in 0.03384 mg of the second International Standard for Tetanus Antitoxin. This definition would ensure the continuity of the size of this international unit. The analysis of the collaborative studies also showed that the second International Standard for Tetanus Antitoxin has suitable properties for use in the flocculation test for the determination of the antigen content of tetanus toxoids in Lf values. The designation Lf-equivalent is described and the problems relating to the use of this term for the expression of results of in vitro assays are analysed in relation to the use of international units for expressing results of in vivo assays. As the second International Standard for Tetanus Antitoxin has an in vivo/in vitro ratio of 1.4, the Lf-equivalent of this antitoxin is 1.4 times less than its unitage. PMID:5310949

Classifying diseases and remedies in ethnomedicine and ethnopharmacology.

PubMed

Staub, Peter O; Geck, Matthias S; Weckerle, Caroline S; Casu, Laura; Leonti, Marco

2015-11-04

Ethnopharmacology focuses on the understanding of local and indigenous use of medicines and therefore an emic approach is inevitable. Often, however, standard biomedical disease classifications are used to describe and analyse local diseases and remedies. Standard classifications might be a valid tool for cross-cultural comparisons and bioprospecting purposes but are not suitable to understand the local perception of disease and use of remedies. Different standard disease classification systems exist but their suitability for cross-cultural comparisons of ethnomedical data has never been assessed. Depending on the research focus, (I) ethnomedical, (II) cross-cultural, and (III) bioprospecting, we provide suggestions for the use of specific classification systems. We analyse three different standard biomedical classification systems (the International Classification of Diseases (ICD); the Economic Botany Data Collection Standard (EBDCS); and the International Classification of Primary Care (ICPC)), and discuss their value for categorizing diseases of ethnomedical systems and their suitability for cross-cultural research in ethnopharmacology. Moreover, based on the biomedical uses of all approved plant derived biomedical drugs, we propose a biomedical therapy-based classification system as a guide for the discovery of drugs from ethnopharmacological sources. Widely used standards, such as the International Classification of Diseases (ICD) by the WHO and the Economic Botany Data Collection Standard (EBDCS) are either technically challenging due to a categorisation system based on clinical examinations, which are usually not possible during field research (ICD) or lack clear biomedical criteria combining disorders and medical effects in an imprecise and confusing way (EBDCS). The International Classification of Primary Care (ICPC), also accepted by the WHO, has more in common with ethnomedical reality than the ICD or the EBDCS, as the categories are designed according to patient's perceptions and are less influenced by clinical medicine. Since diagnostic tools are not required, medical ethnobotanists and ethnopharmacologists can easily classify reported symptoms and complaints with the ICPC in one of the "chapters" based on 17 body systems, psychological and social problems. Also the biomedical uses of plant-derived drugs are classifiable into 17 broad organ- and therapy-based use-categories but can easily be divided into more specific subcategories. Depending on the research focus (I-III) we propose the following classification systems: I. Ethnomedicine: Ethnomedicine is culture-bound and local classifications have to be understood from an emic perspective. Consequently, the application of prefabricated, "one-size fits all" biomedical classification schemes is of limited value. II. Cross-cultural analysis: The ICPC is a suitable standard that can be applied but modified as required. III. Bioprospecting: We suggest a biomedical therapy-driven classification system with currently 17 use-categories based on biomedical uses of all approved plant derived natural product drugs. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

A comparative study of monosaccharide composition analysis as a carbohydrate test for biopharmaceuticals.

PubMed

Harazono, Akira; Kobayashi, Tetsu; Kawasaki, Nana; Itoh, Satsuki; Tada, Minoru; Hashii, Noritaka; Ishii, Akiko; Arato, Teruyo; Yanagihara, Shigehiro; Yagi, Yuki; Koga, Akiko; Tsuda, Yuriko; Kimura, Mikiko; Sakita, Masashi; Kitamura, Satoshi; Yamaguchi, Hideto; Mimura, Hisashi; Murata, Yoshimi; Hamazume, Yasuki; Sato, Takayuki; Natsuka, Shunji; Kakehi, Kazuaki; Kinoshita, Mitsuhiro; Watanabe, Sakie; Yamaguchi, Teruhide

2011-05-01

The various monosaccharide composition analysis methods were evaluated as monosaccharide test for glycoprotein-based pharmaceuticals. Neutral and amino sugars were released by hydrolysis with 4-7N trifluoroacetic acid. The monosaccharides were N-acetylated if necessary, and analyzed by high-performance liquid chromatography (HPLC) with fluorometric or UV detection after derivatization with 2-aminopyridine, ethyl 4-aminobenzoate, 2-aminobenzoic acid or 1-phenyl-3-methyl-5-pyrazolone, or high pH anion exchange chromatography with pulsed amperometric detection (HPAEC-PAD). Sialic acids were released by mild acid hydrolysis or sialidase digestion, and analyzed by HPLC with fluorometric detection after derivatization with 1,2-diamino-4,5-methylenedioxybenzene, or HPAEC-PAD. These methods were verified for resolution, linearity, repeatability, and accuracy using a monosaccharide standard solution, a mixture of epoetin alfa and beta, and alteplase as models. It was confirmed that those methods were useful for ensuring the consistency of glycosylation. It is considered essential that the analytical conditions including desalting, selection of internal standards, release of monosaccharides, and gradient time course should be determined carefully to eliminate interference of sample matrix. Various HPLC-based monosaccharide analysis methods were evaluated as a carbohydrate test for glycoprotein pharmaceuticals by an inter-laboratory study. Copyright © 2011 The International Association for Biologicals. Published by Elsevier Ltd. All rights reserved.

Functional Competency Development Model for Academic Personnel Based on International Professional Qualification Standards in Computing Field

ERIC Educational Resources Information Center

Tumthong, Suwut; Piriyasurawong, Pullop; Jeerangsuwan, Namon

2016-01-01

This research proposes a functional competency development model for academic personnel based on international professional qualification standards in computing field and examines the appropriateness of the model. Specifically, the model consists of three key components which are: 1) functional competency development model, 2) blended training…

Correction for isotopic interferences between analyte and internal standard in quantitative mass spectrometry by a nonlinear calibration function.

PubMed

Rule, Geoffrey S; Clark, Zlatuse D; Yue, Bingfang; Rockwood, Alan L

2013-04-16

Stable isotope-labeled internal standards are of great utility in providing accurate quantitation in mass spectrometry (MS). An implicit assumption has been that there is no "cross talk" between signals of the internal standard and the target analyte. In some cases, however, naturally occurring isotopes of the analyte do contribute to the signal of the internal standard. This phenomenon becomes more pronounced for isotopically rich compounds, such as those containing sulfur, chlorine, or bromine, higher molecular weight compounds, and those at high analyte/internal standard concentration ratio. This can create nonlinear calibration behavior that may bias quantitative results. Here, we propose the use of a nonlinear but more accurate fitting of data for these situations that incorporates one or two constants determined experimentally for each analyte/internal standard combination and an adjustable calibration parameter. This fitting provides more accurate quantitation in MS-based assays where contributions from analyte to stable labeled internal standard signal exist. It can also correct for the reverse situation where an analyte is present in the internal standard as an impurity. The practical utility of this approach is described, and by using experimental data, the approach is compared to alternative fits.

Measuring laboratory-based influenza surveillance capacity: development of the 'International Influenza Laboratory Capacity Review' Tool.

PubMed

Muir-Paulik, S A; Johnson, L E A; Kennedy, P; Aden, T; Villanueva, J; Reisdorf, E; Humes, R; Moen, A C

2016-01-01

The 2005 International Health Regulations (IHR 2005) emphasized the importance of laboratory capacity to detect emerging diseases including novel influenza viruses. To support IHR 2005 requirements and the need to enhance influenza laboratory surveillance capacity, the Association of Public Health Laboratories (APHL) and the Centers for Disease Control and Prevention (CDC) Influenza Division developed the International Influenza Laboratory Capacity Review (Tool). Data from 37 assessments were reviewed and analyzed to verify that the quantitative analysis results accurately depicted a laboratory's capacity and capabilities. Subject matter experts in influenza and laboratory practice used an iterative approach to develop the Tool incorporating feedback and lessons learnt through piloting and implementation. To systematically analyze assessment data, a quantitative framework for analysis was added to the Tool. The review indicated that changes in scores consistently reflected enhanced or decreased capacity. The review process also validated the utility of adding a quantitative analysis component to the assessments and the benefit of establishing a baseline from which to compare future assessments in a standardized way. Use of the Tool has provided APHL, CDC and each assessed laboratory with a standardized analysis of the laboratory's capacity. The information generated is used to improve laboratory systems for laboratory testing and enhance influenza surveillance globally. We describe the development of the Tool and lessons learnt. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Posttest analysis of international standard problem 10 using RELAP4/MOD7. [PWR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hsu, M.; Davis, C.B.; Peterson, A.C. Jr.

RELAP4/MOD7, a best estimate computer code for the calculation of thermal and hydraulic phenomena in a nuclear reactor or related system, is the latest version in the RELAP4 code development series. This paper evaluates the capability of RELAP4/MOD7 to calculate refill/reflood phenomena. This evaluation uses the data of International Standard Problem 10, which is based on West Germany's KWU PKL refill/reflood experiment K9A. The PKL test facility represents a typical West German four-loop, 1300 MW pressurized water reactor (PWR) in reduced scale while maintaining prototypical volume-to-power ratio. The PKL facility was designed to specifically simulate the refill/reflood phase of amore » hypothetical loss-of-coolant accident (LOCA).« less

Multifractal Properties of Process Control Variables

NASA Astrophysics Data System (ADS)

Domański, Paweł D.

2017-06-01

Control system is an inevitable element of any industrial installation. Its quality affects overall process performance significantly. The assessment, whether control system needs any improvement or not, requires relevant and constructive measures. There are various methods, like time domain based, Minimum Variance, Gaussian and non-Gaussian statistical factors, fractal and entropy indexes. Majority of approaches use time series of control variables. They are able to cover many phenomena. But process complexities and human interventions cause effects that are hardly visible for standard measures. It is shown that the signals originating from industrial installations have multifractal properties and such an analysis may extend standard approach to further observations. The work is based on industrial and simulation data. The analysis delivers additional insight into the properties of control system and the process. It helps to discover internal dependencies and human factors, which are hardly detectable.

An Elementary Algorithm for Autonomous Air Terminal Merging and Interval Management

NASA Technical Reports Server (NTRS)

White, Allan L.

2017-01-01

A central element of air traffic management is the safe merging and spacing of aircraft during the terminal area flight phase. This paper derives and examines an algorithm for the merging and interval managing problem for Standard Terminal Arrival Routes. It describes a factor analysis for performance based on the distribution of arrivals, the operating period of the terminal, and the topology of the arrival routes; then presents results from a performance analysis and from a safety analysis for a realistic topology based on typical routes for a runway at Phoenix International Airport. The heart of the safety analysis is a statistical derivation on how to conduct a safety analysis for a local simulation when the safety requirement is given for the entire airspace.

Air Force Officer Force Development, an Analysis and Future Issues

DTIC Science & Technology

2004-02-27

Kotter’s Eight Steps John P. Kotter is a Konosuke Matsushita Professor of Leadership at the Harvard Business School, and is an internationally...PAGE unclassified Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 DISCLAIMER The views expressed in this academic research paper are...Employees for Broad -Based Action ......................................................13 Generating Short-Term Wins

Report of official foreign travel to France, June 7--20, 2000

DOE Office of Scientific and Technical Information (OSTI.GOV)

J.D. Mason

2000-07-11

The Department of Energy (DOE) has moved rapidly toward electronic production, management, and dissemination of scientific and technical information. The World-Wide Web (WWW) has become a primary means of information dissemination. Electronic commerce (EC) is becoming the preferred means of procurement. DOE, like other government agencies, depends on and encourages the use of international standards in data communications. Like most government agencies, DOE has expressed a preference for openly developed standards over proprietary designs promoted as ``standards'' by vendors. In particular, there is a preference for standards developed by organizations such as the International Organization for Standardization (ISO) and themore » American National Standards Institute (ANSI) that use open, public processes to develop their standards. Among the most widely adopted international standards is the Standard Generalized Markup Language (SGML, ISO 8879:1986, FIPS 152), to which DOE long ago made a commitment. Besides the official commitment, which has resulted in several specialized projects, DOE makes heavy use of coding derived from SGML: Most documents on the WWW are coded in HTML (Hypertext Markup Language), which is an application of SGML. The World-Wide Web Consortium (W3C), with the backing of major software houses like Adobe, IBM, Microsoft, Netscape, Oracle, and Sun, is promoting XML (eXtensible Markup Language), a class of SGML applications, for the future of the WWW and the basis for EC. In support of DOE's use of these standards, the authors has served since 1985 as Chairman of the international committee responsible for SGML and related standards, ISO/IEC JTC1/SC34 (SC34) and its predecessor organizations. During his June 2000 trip, he chaired the spring 2000 meeting of SC34 in Paris, France. He also attended a major conference on the use of SGML and XML and led a meeting of the International SGML/XML Users' Group (ISUG). In addition to the widespread use of the WWW among DOE's plants and facilities in Oak Ridge and among DOE sites across the nation, there are several SGML-based projects at the Oak Ridge Y-12 Plant. The local project team developed an SGML-based publications system that has been used for several major reports at the Y-12 Plant and Oak Ridge National Laboratory (ORNL). SGML is a component of the Weapons Records Archiving and Preservation (WRAP) project at the Y-12 Plant and is the format for catalog metadata chosen for weapons records by the Nuclear Weapons Information Group (NWIG). The Ferret system for automated classification analysis will use XML to structure its knowledge base. Supporting standards development allows DOE and the Y-12 plant the opportunity both to provide input into the process and to benefit from contact with some of the leading experts in the subject matter. Oak Ridge has been for some years the location to which other DOE sites turn for expertise in SGML and related topics.« less

International development of methods of analysis for the presence of products of modern biotechnology.

PubMed

Cantrill, Richard C

2008-01-01

Methods of analysis for products of modern biotechnology are required for national and international trade in seeds, grain and food in order to meet the labeling or import/export requirements of different nations and trading blocks. Although many methods were developed by the originators of transgenic events, governments, universities, and testing laboratories, trade is less complicated if there exists a set of international consensus-derived analytical standards. In any analytical situation, multiple methods may exist for testing for the same analyte. These methods may be supported by regional preferences and regulatory requirements. However, tests need to be sensitive enough to determine low levels of these traits in commodity grain for regulatory purposes and also to indicate purity of seeds containing these traits. The International Organization for Standardization (ISO) and its European counterpart have worked to produce a suite of standards through open, balanced and consensus-driven processes. Presently, these standards are approaching the time for their first review. In fact, ISO 21572, the "protein standard" has already been circulated for systematic review. In order to expedite the review and revision of the nucleic acid standards an ISO Technical Specification (ISO/TS 21098) was drafted to set the criteria for the inclusion of precision data from collaborative studies into the annexes of these standards.

INTERNATIONAL REPORTS: New International Standards for Quantities and Units

NASA Astrophysics Data System (ADS)

Thor, A. J.

1994-01-01

Each coherent system of units is based on a system of quantities in such a way that the equations between the numerical values expressed in coherent units have exactly the same form, including numerical factors, as the corresponding equations between the quantities. The highest international body responsible for the International System of Units (SI) is the Conférence Générale des Poids et Mesures (CGPM). However, the CGPM is not concerned with quantities or systems of quantities. That question lies within the scope of Technical Committee number twelve of the International Organization for Standardization (ISO/TC 12). Quantities, units, symbols, conversion factors. To fulfil its responsibility, ISO/TC 12 has prepared the International Standard ISO 31, Quantities and Units, which consists of fourteen parts. The new editions of the different parts of the International Standard are briefly presented here.

Approaches to setting organism-based ballast water discharge standards

USGS Publications Warehouse

Lee, Henry; Reusser, Deborah A.; Frazier, Melanie

2013-01-01

As a vector by which foreign species invade coastal and freshwater waterbodies, ballast water discharge from ships is recognized as a major environmental threat. The International Maritime Organization (IMO) drafted an international treaty establishing ballast water discharge standards based on the number of viable organisms per volume of ballast discharge for different organism size classes. Concerns that the IMO standards are not sufficiently protective have initiated several state and national efforts in the United States to develop more stringent standards. We evaluated seven approaches to establishing discharge standards for the >50-μm size class: (1) expert opinion/management consensus, (2) zero detectable living organisms, (3) natural invasion rates, (4) reaction–diffusion models, (5) population viability analysis (PVA) models, (6) per capita invasion probabilities (PCIP), and (7) experimental studies. Because of the difficulty in synthesizing scientific knowledge in an unbiased and transparent fashion, we recommend the use of quantitative models instead of expert opinion. The actual organism concentration associated with a “zero detectable organisms” standard is defined by the statistical rigor of its monitoring program; thus it is not clear whether such a standard is as stringent as other standards. For several reasons, the natural invasion rate, reaction–diffusion, and experimental approaches are not considered suitable for generating discharge standards. PVA models can be used to predict the likelihood of establishment of introduced species but are limited by a lack of population vital rates for species characteristic of ballast water discharges. Until such rates become available, PVA models are better suited to evaluate relative efficiency of proposed standards rather than predicting probabilities of invasion. The PCIP approach, which is based on historical invasion rates at a regional scale, appears to circumvent many of the indicated problems, although it may underestimate invasions by asexual and parthenogenic species. Further research is needed to better define propagule dose–responses, densities at which Allee effects occur, approaches to predicting the likelihood of invasion from multi-species introductions, and generation of formal comparisons of approaches using standardized scenarios.

[The use of the deuterated internal standard for morphine quantitation for the purpose of doping control by gas chromatography with mass-selective detection].

PubMed

Savel'eva, N B; Bykovskaia, N Iu; Dikunets, M A; Bolotov, S L; Rodchenkov, G M

2010-01-01

The objective of this study was to demonstrate the possibility to use deuterated compounds as internal standards for the quantitative analysis of morphine by gas chromatography with mass-selective detection for the purpose of doping control. The paper is focused on the problems associated with the use of deuterated morphine-D3 as the internal standard. Quantitative characteristics of the calibration dependence thus documented are presented along with uncertainty values obtained in the measurements with the use of deuterated morphine-D6. An approach to the assessment of method bias associated with the application of morphine-D6 as the deuterated internal standard is described.

User Guide to RockJock - A Program for Determining Quantitative Mineralogy from X-Ray Diffraction Data

USGS Publications Warehouse

Eberl, D.D.

2003-01-01

RockJock is a computer program that determines quantitative mineralogy in powdered samples by comparing the integrated X-ray diffraction (XRD) intensities of individual minerals in complex mixtures to the intensities of an internal standard. Analysis without an internal standard (standardless analysis) also is an option. This manual discusses how to prepare and X-ray samples and mineral standards for these types of analyses and describes the operation of the program. Carefully weighed samples containing an internal standard (zincite) are ground in a McCrone mill. Randomly oriented preparations then are X-rayed, and the X-ray data are entered into the RockJock program. Minerals likely to be present in the sample are chosen from a list of standards, and the calculation is begun. The program then automatically fits the sum of stored XRD patterns of pure standard minerals (the calculated pattern) to the measured pattern by varying the fraction of each mineral standard pattern, using the Solver function in Microsoft Excel to minimize a degree of fit parameter between the calculated and measured pattern. The calculation analyzes the pattern (usually 20 to 65 degrees two-theta) to find integrated intensities for the minerals. Integrated intensities for each mineral then are determined from the proportion of each mineral standard pattern required to give the best fit. These integrated intensities then are compared to the integrated intensity of the internal standard, and the weight percentages of the minerals are calculated. The results are presented as a list of minerals with their corresponding weight percent. To some extent, the quality of the analysis can be checked because each mineral is analyzed independently, and, therefore, the sum of the analysis should approach 100 percent. Also, the method has been shown to give good results with artificial mixtures. The program is easy to use, but does require an understanding of mineralogy, of X-ray diffraction practice, and an elementary knowledge of the Excel program.

The International Standard for Aureomycin

PubMed Central

Humphrey, J. H.; Lightbown, J. W.; Mussett, M. V.; Perry, W. L. M.

1953-01-01

In 1950, the Department of Biological Standards, National Institute for Medical Research, London, was authorized by the WHO Expert Committee on Biological Standardization to proceed with the establishment of an International Standard for Aureomycin. A 100-g batch of aureomycin was obtained and was compared with the Standard Preparation of Aureomycin of the United States Food and Drug Administration (FDA) in a collaborative assay in which six laboratories in five countries participated. In all, 30 assays were carried out; 26 of these were done by biological methods, using Sarcina lutea, Bacillus pumilus, Staphylococcus aureus, or Bacillus cereus, and the remaining four by physicochemical methods. The results were subjected to standard methods of analysis, and the overall weighted mean potency (calculated from the biological assays only) was 1.0139, with limits of error of 99.5% to 100.5%. Since the International Standard is 1.39% more potent than the FDA Standard Preparation, it is probable that the latter contains a small amount of inert material; it is also possible that the International Standard itself is not 100% pure. For most practical purposes, however, both preparations may be regarded as substantially pure, and it is considered that to alter the present practice of quoting aureomycin dosage in metric units of weight would be inadvisable. Nevertheless, since the International Standard may not be a pure substance, a unit notation—for use where required in bioassays—is desirable, and the International Unit of Aureomycin has therefore been defined as the activity contained in one microgram of the International Standard. PMID:13141137

International legal regulation of impact of occupational injuries and diseases on agricultural workers' health.

PubMed

Pashkov, Vitalii M; Batyhina, Olena M; Trotska, Maryna V

Agricultural workers' health depends on many factors: working conditions, security arrangements, medicine, quality of drugs, the environment, etc. Occupational injuries and diseases are also among the factors that can negatively affect their health. To analyze provisions of the international legislation and scientific literature concerning existence of restrictions on impact of occupational injuries and diseases on agricultural workers' health. International acts, data of international organizations and conclusions of scientists have been examined and used in the study. The article also integrates information from scientific journals and monographs from a medical and legal point of view with scientific methods. This article is based on dialectical, comparative, analytic, synthetic and comprehensive research methods. Impact of occupational injuries and diseases on agricultural workers' health has been studied within the system approach, as well as analysis and synthesis. The level of occupational morbidity, traumatism and above all standard of agricultural workers' health depends on the way of occupational safety organization. Working conditions and safety in agricultural industry and therefore the appropriate standard of health remain unsatisfactory in many countries.

Waist Circumferences of Chilean Students: Comparison of the CDC-2012 Standard and Proposed Percentile Curves

PubMed Central

Gómez-Campos, Rossana; Lee Andruske, Cinthya; Hespanhol, Jefferson; Sulla Torres, Jose; Arruda, Miguel; Luarte-Rocha, Cristian; Cossio-Bolaños, Marco Antonio

2015-01-01

The measurement of waist circumference (WC) is considered to be an important means to control overweight and obesity in children and adolescents. The objectives of the study were to (a) compare the WC measurements of Chilean students with the international CDC-2012 standard and other international standards, and (b) propose a specific measurement value for the WC of Chilean students based on age and sex. A total of 3892 students (6 to 18 years old) were assessed. Weight, height, body mass index (BMI), and WC were measured. WC was compared with the CDC-2012 international standard. Percentiles were constructed based on the LMS method. Chilean males had a greater WC during infancy. Subsequently, in late adolescence, males showed values lower than those of the international standards. Chilean females demonstrated values similar to the standards until the age of 12. Subsequently, females showed lower values. The 85th and 95th percentiles were adopted as cutoff points for evaluating overweight and obesity based on age and sex. The WC of Chilean students differs from the CDC-2012 curves. The regional norms proposed are a means to identify children and adolescents with a high risk of suffering from overweight and obesity disorders. PMID:26184250

Quantitative Assessment of Commutability for Clinical Viral Load Testing Using a Digital PCR-Based Reference Standard

PubMed Central

Tang, L.; Sun, Y.; Buelow, D.; Gu, Z.; Caliendo, A. M.; Pounds, S.

2016-01-01

Given recent advances in the development of quantitative standards, particularly WHO international standards, efforts to better understand the commutability of reference materials have been made. Existing approaches in evaluating commutability include prediction intervals and correspondence analysis; however, the results obtained from existing approaches may be ambiguous. We have developed a “deviation-from-ideal” (DFI) approach to evaluate commutability of standards and applied it to the assessment of Epstein-Bar virus (EBV) load testing in four quantitative PCR assays, treating digital PCR as a reference assay. We then discuss advantages and limitations of the DFI approach as well as experimental design to best evaluate the commutability of an assay in practice. PMID:27076654

Therapeutic intervention for internalized stigma of severe mental illness: A systematic review and meta-analysis.

PubMed

Tsang, Hector W H; Ching, S C; Tang, K H; Lam, H T; Law, Peggy Y Y; Wan, C N

2016-05-01

Internalized stigma can lead to pervasive negative effects among people with severe mental illness (SMI). Although prevalence of internalized stigma is high, there is a dearth of interventions and meanwhile a lack of evidence as to their effectiveness. This study aims at unraveling the existence of different therapeutic interventions and the effectiveness internalized stigma reduction in people with SMI via a systematic review and meta-analysis. Five electronic databases were searched. Studies were included if they (1) involved community or hospital based interventions on internalized stigma, (2) included participants who were given a diagnosis of SMI>50%, and (3) were empirical and quantitative in nature. Fourteen articles were selected for extensive review and five for meta-analysis. Nine studies showed significant decrease in internalized stigma and two showed sustainable effects. Meta-analysis showed that there was a small to moderate significant effect in therapeutic interventions (SMD=-0.43; p=0.003). Among the intervention elements, four studies suggested a favorable effect of psychoeducation. Meta-analysis showed that there was small to moderate significant effect (SMD=-0.40; p=0.001). Most internalized stigma reduction programs appear to be effective. This systematic review cannot make any recommendation on which intervention is more effective although psychoeducation seems most promising. More Randomized Controlled Trials (RCT) on particular intervention components using standard outcome measures are recommended in future studies. Copyright © 2016. Published by Elsevier B.V.

Improving the psychometric properties of dot-probe attention measures using response-based computation.

PubMed

Evans, Travis C; Britton, Jennifer C

2018-09-01

Abnormal threat-related attention in anxiety disorders is most commonly assessed and modified using the dot-probe paradigm; however, poor psychometric properties of reaction-time measures may contribute to inconsistencies across studies. Typically, standard attention measures are derived using average reaction-times obtained in experimentally-defined conditions. However, current approaches based on experimentally-defined conditions are limited. In this study, the psychometric properties of a novel response-based computation approach to analyze dot-probe data are compared to standard measures of attention. 148 adults (19.19 ± 1.42 years, 84 women) completed a standardized dot-probe task including threatening and neutral faces. We generated both standard and response-based measures of attention bias, attentional orientation, and attentional disengagement. We compared overall internal consistency, number of trials necessary to reach internal consistency, test-retest reliability (n = 72), and criterion validity obtained using each approach. Compared to standard attention measures, response-based measures demonstrated uniformly high levels of internal consistency with relatively few trials and varying improvements in test-retest reliability. Additionally, response-based measures demonstrated specific evidence of anxiety-related associations above and beyond both standard attention measures and other confounds. Future studies are necessary to validate this approach in clinical samples. Response-based attention measures demonstrate superior psychometric properties compared to standard attention measures, which may improve the detection of anxiety-related associations and treatment-related changes in clinical samples. Copyright © 2018 Elsevier Ltd. All rights reserved.

Coping with matrix effects in headspace solid phase microextraction gas chromatography using multivariate calibration strategies.

PubMed

Ferreira, Vicente; Herrero, Paula; Zapata, Julián; Escudero, Ana

2015-08-14

SPME is extremely sensitive to experimental parameters affecting liquid-gas and gas-solid distribution coefficients. Our aims were to measure the weights of these factors and to design a multivariate strategy based on the addition of a pool of internal standards, to minimize matrix effects. Synthetic but real-like wines containing selected analytes and variable amounts of ethanol, non-volatile constituents and major volatile compounds were prepared following a factorial design. The ANOVA study revealed that even using a strong matrix dilution, matrix effects are important and additive with non-significant interaction effects and that it is the presence of major volatile constituents the most dominant factor. A single internal standard provided a robust calibration for 15 out of 47 analytes. Then, two different multivariate calibration strategies based on Partial Least Square Regression were run in order to build calibration functions based on 13 different internal standards able to cope with matrix effects. The first one is based in the calculation of Multivariate Internal Standards (MIS), linear combinations of the normalized signals of the 13 internal standards, which provide the expected area of a given unit of analyte present in each sample. The second strategy is a direct calibration relating concentration to the 13 relative areas measured in each sample for each analyte. Overall, 47 different compounds can be reliably quantified in a single fully automated method with overall uncertainties better than 15%. Copyright © 2015 Elsevier B.V. All rights reserved.

An Evaluation Methodology for the Usability and Security of Cloud-based File Sharing Technologies

DTIC Science & Technology

2012-09-01

FISMA, ISO 27001 , FIPS 140-2, and ISO 270001) indicate a cloud-based service’s compliance with industry standard security controls, management and...Information Assurance IEEE Institute of Electrical and Electronics Engineers IT Information Technology ITS Insider Threat Study ISO International...effectively, efficiently and with satisfaction” (International Organization for Standardization [ ISO ], 1998). Alternately, information security

An Audit of Emergency Department Accreditation Based on Joint Commission International Standards (JCI).

PubMed

Hashemi, Behrooz; Motamedi, Maryam; Etemad, Mania; Rahmati, Farhad; Forouzanfar, Mohammad Mehdi; Kaghazchi, Fatemeh

2014-01-01

Despite thousands of years from creation of medical knowledge, it not much passes from founding the health care systems. Accreditation is an effective mechanism for performance evaluation, quality enhancement, and the safety of health care systems. This study was conducted to assess the results of emergency department (ED) accreditation in Shohadaye Tajrish Hospital, Tehran, Iran, 2013 in terms of domesticated standards of joint commission international (JCI) standards. This cohort study with a four-month follow up was conducted in the ED of Shohadaye Tajrish Hospital in 2013. The standard evaluation checklist of Iran hospitals (based on JCI standards) included 24 heading and 337 subheading was used for this purpose. The effective possible causes of weak spots were found and their solutions considered. After correction, assessment of accreditation were repeated again. Finally, the achieved results of two periods were analyzed using SPSS version 20. Quality improvement, admission in department and patient assessment, competency and capability test for staffs, collection and analysis of data, training of patients, and facilities had the score of below 50%. The mean of total score for accreditation in ED in the first period was 60.4±30.15 percent and in the second period 68.9±22.9 (p=0.005). Strategic plans, head of department, head nurse, resident physician, responsible nurse for the shift, and personnel file achieved the score of 100%. Of total headings below 50% in the first period just in two cases, collection and analysis of data with growth of 40% as well as competency and capability test for staffs with growth of 17%, were reached to more than 50%. Based on findings of the present study, the ED of Shohadaye Tajrish hospital reached the score of below 50% in six heading of quality improvement, admission in department and patient assessment, competency and capability test for staffs, collection and analysis of data, training of patients, and facilities. While, the given score in strategic plans, head of department, head nurse, resident physician, responsible nurse for the shifts, and personnel file was 100%.

Bridging international law and rights-based litigation: mapping health-related rights through the development of the Global Health and Human Rights Database.

PubMed

Meier, Benjamin Mason; Cabrera, Oscar A; Ayala, Ana; Gostin, Lawrence O

2012-06-15

The O'Neill Institute for National and Global Health Law at Georgetown University, the World Health Organization, and the Lawyers Collective have come together to develop a searchable Global Health and Human Rights Database that maps the intersection of health and human rights in judgments, international and regional instruments, and national constitutions. Where states long remained unaccountable for violations of health-related human rights, litigation has arisen as a central mechanism in an expanding movement to create rights-based accountability. Facilitated by the incorporation of international human rights standards in national law, this judicial enforcement has supported the implementation of rights-based claims, giving meaning to states' longstanding obligations to realize the highest attainable standard of health. Yet despite these advancements, there has been insufficient awareness of the international and domestic legal instruments enshrining health-related rights and little understanding of the scope and content of litigation upholding these rights. As this accountability movement evolves, the Global Health and Human Rights Database seeks to chart this burgeoning landscape of international instruments, national constitutions, and judgments for health-related rights. Employing international legal research to document and catalogue these three interconnected aspects of human rights for the public's health, the Database's categorization by human rights, health topics, and regional scope provides a comprehensive means of understanding health and human rights law. Through these categorizations, the Global Health and Human Rights Database serves as a basis for analogous legal reasoning across states to serve as precedents for future cases, for comparative legal analysis of similar health claims in different country contexts, and for empirical research to clarify the impact of human rights judgments on public health outcomes. Copyright © 2012 Meier, Nygren-Krug, Cabrera, Ayala, and Gostin.

BRIDG: a domain information model for translational and clinical protocol-driven research.

PubMed

Becnel, Lauren B; Hastak, Smita; Ver Hoef, Wendy; Milius, Robert P; Slack, MaryAnn; Wold, Diane; Glickman, Michael L; Brodsky, Boris; Jaffe, Charles; Kush, Rebecca; Helton, Edward

2017-09-01

It is critical to integrate and analyze data from biological, translational, and clinical studies with data from health systems; however, electronic artifacts are stored in thousands of disparate systems that are often unable to readily exchange data. To facilitate meaningful data exchange, a model that presents a common understanding of biomedical research concepts and their relationships with health care semantics is required. The Biomedical Research Integrated Domain Group (BRIDG) domain information model fulfills this need. Software systems created from BRIDG have shared meaning "baked in," enabling interoperability among disparate systems. For nearly 10 years, the Clinical Data Standards Interchange Consortium, the National Cancer Institute, the US Food and Drug Administration, and Health Level 7 International have been key stakeholders in developing BRIDG. BRIDG is an open-source Unified Modeling Language-class model developed through use cases and harmonization with other models. With its 4+ releases, BRIDG includes clinical and now translational research concepts in its Common, Protocol Representation, Study Conduct, Adverse Events, Regulatory, Statistical Analysis, Experiment, Biospecimen, and Molecular Biology subdomains. The model is a Clinical Data Standards Interchange Consortium, Health Level 7 International, and International Standards Organization standard that has been utilized in national and international standards-based software development projects. It will continue to mature and evolve in the areas of clinical imaging, pathology, ontology, and vocabulary support. BRIDG 4.1.1 and prior releases are freely available at https://bridgmodel.nci.nih.gov . © The Author 2017. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com

The Earth System (ES-DOC) Project

NASA Astrophysics Data System (ADS)

Greenslade, Mark; Murphy, Sylvia; Treshansky, Allyn; DeLuca, Cecilia; Guilyardi, Eric; Denvil, Sebastien

2014-05-01

ESSI1.3 New Paradigms, Modelling, and International Collaboration Strategies for Earth System Sciences Earth System Documentation (ES-DOC) is an international project supplying tools & services in support of earth system documentation creation, analysis and dissemination. It is nurturing a sustainable standards based documentation eco-system that aims to become an integral part of the next generation of exa-scale dataset archives. ES-DOC leverages open source software and places end-user narratives at the heart of all it does. ES-DOC has initially focused upon nurturing the Earth System Model (ESM) documentation eco-system. Within this context ES-DOC leverages emerging documentation standards and supports the following projects: Coupled Model Inter-comparison Project Phase 5 (CMIP5); Dynamical Core Model Inter-comparison Project (DCMIP); National Climate Predictions and Projections Platforms Quantitative Evaluation of Downscaling Workshop. This presentation will introduce the project to a wider audience and demonstrate the range of tools and services currently available for use. It will also demonstrate how international collaborative efforts are essential to the success of ES-DOC.

International standardisation work on the measurement of radon in air and water.

PubMed

Calmet, D; Ameon, R; Beck, T; Bombard, A; Bourquin, M N; Brun, S; De Jong, P; Forte, M; Fournier, M; Herranz, M; Jerome, S; Klett, A; Kwakman, P; Llaurado, M; Loyen, J; Michel, R; Nardoux, P; Richards, T; Schuler, C; Tokonami, S; Woods, M

2011-05-01

Radon is considered to be the main source of human exposure to natural radiation. As stated by the World Health Organization, the exposure due to the inhalation of indoor radon is much greater than the one via the ingestion of water as radon degasses from water during handling. In response to these concerns about the universal presence of radon, environmental assessment studies are regularly commissioned to assess the radon exposure of public and workers. The credibility of such studies relies on the quality and reliability of radon analysis as well as on the sample representativeness of the radiological situation. The standard-setting approach, based on consensus, seemed to lend itself to a settlement of technical aspects of potential comparison. At present, two Working Groups of the International Standardization Organization are focussing on drafting standards on radon and its decay products measurement in air and water. These standards, which aim for a set of rigorous metrology practices, will be useful for persons in charge of the initial characterisation of a site with respect to natural radioactivity as well as to those performing the routine surveillance of specific sites.

International standards in mitigating trade risks.

PubMed

Thiermann, A B

2011-04-01

This paper describes the role of the World Organisation for Animal Health (OIE), as a science-based and democratic standard-setting organisation that provides guidance on preventing the spread of animal diseases, including zoonoses, in international trade. The World Trade Organization is identified as the international institution with the legal power to encourage adherence to international standards and mediate trade disputes. The importance of assuring good governance and the credibility of national Veterinary Services through a process of official certification is identified as an essential component in the safety of trade. Private-public partnerships and the evolution of responsibilities are also identified as essential for the implementation of health guarantees such as compartmentalisation. The rapid emergence of private standards is described as a potential complement to the implementation of sanitary standards, as long as they are applied globally and in support of the OIE standards. Ultimately, the biggest challenge is for the international community to create the incentives and generate the political will for fair trade and for the universal recognition and application of the established international sanitary standards.

International Human Rights and the Mistreatment of Women During Childbirth

PubMed Central

Zampas, Christina; Vogel, Joshua P.; Bohren, Meghan A.; Roseman, Mindy; Erdman, Joanna N.

2016-01-01

Abstract International human rights bodies have played a critical role in codifying, setting standards, and monitoring human rights violations in the context of sexual and reproductive health and rights. In recent years, these institutions have developed and applied human rights standards in the more particular context of maternal mortality and morbidity, and have increasingly recognized a critical human rights issue in the provision and experience of care during and after pregnancy, including during childbirth. However, the international human rights standards on mistreatment during facility-based childbirth remain, in an early stage of development, focused largely on a discrete subset of experiences, such as forced sterilization and lack of access to emergency obstetric care. As a consequence, the range of mistreatment that women may experience has not been adequately addressed or analyzed under international human rights law. Identifying human rights norms and standards related to the full range of documented mistreatment is thus a first step towards addressing violations of human rights during facility-based childbirth, ensuring respectful and humane treatment, and developing a program of work to improve the overall quality of maternal care. This article reviews international human rights standards related to the mistreatment of women during childbirth in facility settings under regional and international human rights law and lays out an agenda for further research and action. PMID:28559681

International Human Rights and the Mistreatment of Women During Childbirth.

PubMed

Khosla, Rajat; Zampas, Christina; Vogel, Joshua P; Bohren, Meghan A; Roseman, Mindy; Erdman, Joanna N

2016-12-01

International human rights bodies have played a critical role in codifying, setting standards, and monitoring human rights violations in the context of sexual and reproductive health and rights. In recent years, these institutions have developed and applied human rights standards in the more particular context of maternal mortality and morbidity, and have increasingly recognized a critical human rights issue in the provision and experience of care during and after pregnancy, including during childbirth. However, the international human rights standards on mistreatment during facility-based childbirth remain, in an early stage of development, focused largely on a discrete subset of experiences, such as forced sterilization and lack of access to emergency obstetric care. As a consequence, the range of mistreatment that women may experience has not been adequately addressed or analyzed under international human rights law. Identifying human rights norms and standards related to the full range of documented mistreatment is thus a first step towards addressing violations of human rights during facility-based childbirth, ensuring respectful and humane treatment, and developing a program of work to improve the overall quality of maternal care. This article reviews international human rights standards related to the mistreatment of women during childbirth in facility settings under regional and international human rights law and lays out an agenda for further research and action.

A suggestion for royal jelly specifications.

PubMed

Kanelis, Dimitrios; Tananaki, Chrysoula; Liolios, Vasilis; Dimou, Maria; Goras, Georgios; Rodopoulou, Maria Anna; Karazafiris, Emmanuel; Thrasyvoulou, Andreas

2015-12-01

This article proposes guidelines for quality standards of royal jelly. The proposals are based on two sets of data; the first from our study of the factors that may affect the royal jelly's chemical composition (protein and sugar supplementation of beehives) and the second on the analysis of a great number of samples from across Greece to establish natural variability of this product. We compared our findings with the adopted national limits, the proposals of the working group of the International Honey Commission (IHC), and the draft proposal of the International Organization of Standardization (ISO). The studied parameters included moisture, total proteins, sugars (fructose, glucose, sucrose, total sugars), and 10-hydroxy- 2-decenoic acid (10-HDA). Our results indicate that the limits for royal jelly in some countries should be amended and the proposals of the IHC and the ISO reviewed in view of recent data on variability. We believe that our proposals could be considered for setting global standards for royal jelly, as they incorporate national legislations, proposals of scientific groups, experimental data, and updated information.

Evaluation of portfolio credit risk based on survival analysis for progressive censored data

NASA Astrophysics Data System (ADS)

Jaber, Jamil J.; Ismail, Noriszura; Ramli, Siti Norafidah Mohd

2017-04-01

In credit risk management, the Basel committee provides a choice of three approaches to the financial institutions for calculating the required capital: the standardized approach, the Internal Ratings-Based (IRB) approach, and the Advanced IRB approach. The IRB approach is usually preferred compared to the standard approach due to its higher accuracy and lower capital charges. This paper use several parametric models (Exponential, log-normal, Gamma, Weibull, Log-logistic, Gompertz) to evaluate the credit risk of the corporate portfolio in the Jordanian banks based on the monthly sample collected from January 2010 to December 2015. The best model is selected using several goodness-of-fit criteria (MSE, AIC, BIC). The results indicate that the Gompertz distribution is the best model parametric model for the data.

Analysis of SMELS and reference materials for validation of the k0-based internal monostandard NAA method using in-situ detection efficiency

NASA Astrophysics Data System (ADS)

Acharya, R.; Swain, K. K.; Reddy, A. V. R.

2010-10-01

Three synthetic multielement standards (SMELS I, II and III) and two reference materials (RMs), SL-3 and Soil-7 of IAEA were analyzed for validation of the k0-based internal monostandard neutron activation analysis (IM-NAA) method utilizing in-situ relative detection efficiency. The internal monostandards used in SMELS and RMs were Au and Sc, respectively. The samples were irradiated in Apsara and Dhruva reactors, BARC and radioactive assay was carried out using a 40% relative efficiency HPGe detector coupled to an 8 k MCA. Concentrations of 23 elements were determined in both SMELS and RMs. In the case of RMs, concentrations of a few elements, whose certified values are not available, could also be determined. The % deviations for the elements determined in SMELS with respect to the assigned values and RMs with respect to certified values were within ±8%. The Z-score values at 95% confidence level for most of the elements in both the materials were within ±1.

Assay of potency of the proposed Fifth International Standard for Gas-Gangrene Antitoxin (Perfringens)

PubMed Central

Prigge, R.; Micke, H.; Krüger, J.

1963-01-01

As part of a collaborative assay of the proposed Fifth International Standard for Gas-Gangrene Antitoxin (Perfringens), five ampoules of the proposed replacement material were assayed in the authors' laboratory against the then current Fourth International Standard. Both in vitro and in vivo methods were used. This paper presents the results and their statistical analysis. The two methods yielded different results which were not likely to have been due to chance, but exact statistical comparison is not possible. It is thought, however, that the differences may be due, at least in part, to differences in the relative proportions of zeta-antitoxin and alpha-antitoxin in the Fourth and Fifth International Standards and the consequent different reactions with the test toxin that was used for titration. PMID:14107746

International trade standards for commodities and products derived from animals: the need for a system that integrates food safety and animal disease risk management.

PubMed

Thomson, G R; Penrith, M-L; Atkinson, M W; Thalwitzer, S; Mancuso, A; Atkinson, S J; Osofsky, S A

2013-12-01

A case is made for greater emphasis to be placed on value chain management as an alternative to geographically based disease risk mitigation for trade in commodities and products derived from animals. The geographic approach is dependent upon achievement of freedom in countries or zones from infectious agents that cause so-called transboundary animal diseases, while value chain-based risk management depends upon mitigation of animal disease hazards potentially associated with specific commodities or products irrespective of the locality of production. This commodity-specific approach is founded on the same principles upon which international food safety standards are based, viz. hazard analysis critical control points (HACCP). Broader acceptance of a value chain approach enables animal disease risk management to be combined with food safety management by the integration of commodity-based trade and HACCP methodologies and thereby facilitates 'farm to fork' quality assurance. The latter is increasingly recognized as indispensable to food safety assurance and is therefore a pre-condition to safe trade. The biological principles upon which HACCP and commodity-based trade are based are essentially identical, potentially simplifying sanitary control in contrast to current separate international sanitary standards for food safety and animal disease risks that are difficult to reconcile. A value chain approach would not only enable more effective integration of food safety and animal disease risk management of foodstuffs derived from animals but would also ameliorate adverse environmental and associated socio-economic consequences of current sanitary standards based on the geographic distribution of animal infections. This is especially the case where vast veterinary cordon fencing systems are relied upon to separate livestock and wildlife as is the case in much of southern Africa. A value chain approach would thus be particularly beneficial to under-developed regions of the world such as southern Africa specifically and sub-Saharan Africa more generally where it would reduce incompatibility between attempts to expand and commercialize livestock production and the need to conserve the subcontinent's unparalleled wildlife and wilderness resources. © 2013 Blackwell Verlag GmbH.

Using laser-induced breakdown spectroscopy on vacuum alloys-production process for elements concentration analysis

NASA Astrophysics Data System (ADS)

Zhao, Tianzhuo; Fan, Zhongwei; Lian, Fuqiang; Liu, Yang; Lin, Weiran; Mo, Zeqiang; Nie, Shuzhen; Wang, Pu; Xiao, Hong; Li, Xin; Zhong, Qixiu; Zhang, Hongbo

2017-11-01

Laser-induced breakdown spectroscopy (LIBS) utilizing an echelle spectrograph-ICCD system is employed for on-line analysis of elements concentration in a vacuum induction melting workshop. Active temperature stabilization of echelle spectrometer is implemented specially for industrial environment applications. The measurement precision is further improved by monitoring laser parameters, such as pulse energy, spatial and temporal profiles, in real time, and post-selecting laser pulses with specific pulse energies. Experimental results show that major components of nickel-based alloys are stable, and can be well detected. By using internal standard method, calibration curves for chromium and aluminum are obtained for quantitative determination, with determination coefficient (relative standard deviation) to be 0.9559 (< 2.2%) and 0.9723 (< 2.8%), respectively.

A web-based information system for management and analysis of patient data after refractive eye surgery.

PubMed

Zuberbuhler, Bruno; Galloway, Peter; Reddy, Aravind; Saldana, Manuel; Gale, Richard

2007-12-01

The aim was to develop a software tool for refractive surgeons using a standard user-friendly web-based interface, providing the user with a secure environment to protect large volumes of patient data. The software application was named "Internet-based refractive analysis" (IBRA), and was programmed with the computer languages PHP, HTML and JavaScript, attached to the opensource MySQL database. IBRA facilitated internationally accepted presentation methods including the stability chart, the predictability chart and the safety chart; it was able to perform vector analysis for the course of a single patient or for group data. With the integrated nomogram calculation, treatment could be customised to reduce the postoperative refractive error. Multicenter functions permitted quality-control comparisons between different surgeons and laser units.

Evidence Regarding the Internal Structure: Confirmatory Factor Analysis

ERIC Educational Resources Information Center

Lewis, Todd F.

2017-01-01

American Educational Research Association (AERA) standards stipulate that researchers show evidence of the internal structure of instruments. Confirmatory factor analysis (CFA) is one structural equation modeling procedure designed to assess construct validity of assessments that has broad applicability for counselors interested in instrument…

[Implementation of the National Expert Standard Prophylaxis of Pressure Ulcers in nurse practise - a cost-benefit analysis].

PubMed

Wolke, R; Hennings, D; Scheu, P

2007-06-01

By developing evidence-based, national Expert Standards, agreed-upon by an association of nursing professionals, the German Care Science participates in the international discussion. Up to now, five National Expert Standards on relevant care-related topics have been developed and have been widely implemented in Care Practice. However, sufficient evaluations of these Expert Standards are still required, especially from an economic perspective. The following paper addresses this topic by performing a cost-benefit analysis for the National Expert Standard Prophylaxis of Pressure Ulcers. The authors demonstrate which costs are caused by the implementation of this National Expert Standard for a residential care agency providing services. The benefit of the implementation of the Expert Standard is then being compared to its cost for a period of three years. The evaluation concludes that, in consideration of opportunity costs, the introduction of the National Expert Standard Prophylaxis of Pressure Ulcers appears economically viable for the residential care agency only if the rate of pressure ulcers in the reference agency can be lowered at least by 26.48%. In this case, when exclusively considering direct benefits and direct costs, a positive impact of the implementation will be achieved.

How Two Small Pharmacy Schools' Competency Standards Compare with an International Competency Framework and How Well These Schools Prepare Students for International Placements.

PubMed

Hawboldt, John; Nash, Rose; FitzPatrick, Beverly

2017-03-06

International standards of pharmacy curricula are necessary to ensure student readiness for international placements. This paper explores whether curricula from two pharmacy programs, in Australia and Canada, are congruent with international standards and if students feel prepared for international placements. Nationally prescribed educational standards for the two schools were compared to each other and then against the International Pharmaceutical Federation (FIP) Global Competency Framework. Written student reflections complemented this analysis. Mapping results suggested substantial agreement between the FIP framework and Australia and Canada, with two gaps being identified. Moreover, the students felt their programs prepared them for their international placements. Despite differences in countries, pharmacy programs, and health-systems all students acclimatized to their new practice sites. Implications are that if pharmacy programs align well with FIP, pharmacists should be able to integrate and practise in other jurisdictions that also align with the FIP. This has implications for the mobility of pharmacy practitioners to countries not of their origin of training.

A review of the International Atomic Energy Agency (IAEA) international standards for tissue banks.

PubMed

Morales Pedraza, Jorge; Lobo Gajiwala, Astrid; Martinez Pardo, María Esther

2012-03-01

The IAEA International Standards for Tissue Banks published in 2003 were based on the Standards then currently in use in the USA and the European Union, among others, and reflect the best practices associated with the operation of a tissue bank. They cover legal, ethical and regulatory controls as well as requirements and procedures from donor selection and tissue retrieval to processing and distribution of finished tissue for clinical use. The application of these standards allows tissue banks to operate with the current good tissue practice, thereby providing grafts of high quality that satisfy the national and international demand for safe and biologically useful grafts. The objective of this article is to review the IAEA Standards and recommend new topics that could improve the current version.

A Collaborative Evaluation of LC-MS/MS Based Methods for BMAA Analysis: Soluble Bound BMAA Found to Be an Important Fraction.

PubMed

Faassen, Elisabeth J; Antoniou, Maria G; Beekman-Lukassen, Wendy; Blahova, Lucie; Chernova, Ekaterina; Christophoridis, Christophoros; Combes, Audrey; Edwards, Christine; Fastner, Jutta; Harmsen, Joop; Hiskia, Anastasia; Ilag, Leopold L; Kaloudis, Triantafyllos; Lopicic, Srdjan; Lürling, Miquel; Mazur-Marzec, Hanna; Meriluoto, Jussi; Porojan, Cristina; Viner-Mozzini, Yehudit; Zguna, Nadezda

2016-02-29

Exposure to β-N-methylamino-l-alanine (BMAA) might be linked to the incidence of amyotrophic lateral sclerosis, Alzheimer's disease and Parkinson's disease. Analytical chemistry plays a crucial role in determining human BMAA exposure and the associated health risk, but the performance of various analytical methods currently employed is rarely compared. A CYANOCOST initiated workshop was organized aimed at training scientists in BMAA analysis, creating mutual understanding and paving the way towards interlaboratory comparison exercises. During this workshop, we tested different methods (extraction followed by derivatization and liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) analysis, or directly followed by LC-MS/MS analysis) for trueness and intermediate precision. We adapted three workup methods for the underivatized analysis of animal, brain and cyanobacterial samples. Based on recovery of the internal standard D₃BMAA, the underivatized methods were accurate (mean recovery 80%) and precise (mean relative standard deviation 10%), except for the cyanobacterium Leptolyngbya. However, total BMAA concentrations in the positive controls (cycad seeds) showed higher variation (relative standard deviation 21%-32%), implying that D₃BMAA was not a good indicator for the release of BMAA from bound forms. Significant losses occurred during workup for the derivatized method, resulting in low recovery (<10%). Most BMAA was found in a trichloroacetic acid soluble, bound form and we recommend including this fraction during analysis.

Internal standards in fluorescent X-ray spectroscopy1 1 Publication authorized by the Director, U.S. Geological Survey.

USGS Publications Warehouse

Adler, I.; Axelrod, J.M.

1955-01-01

The use of internal standards in the analysis of ores and minerals of widely-varying matrix by means of fluorescent X-ray spectroscopy is frequently the most practical approach. Internal standards correct for absorption and enhancement effects except when an absorption edge falls between the comparison lines or a very strong emission line falls between the absorption edges responsible for the comparison lines. Particle size variations may introduce substantial errors. One method of coping with the particle size problem is grinding the sample with an added abrasive. ?? 1955.

Integration of next-generation sequencing in clinical diagnostic molecular pathology laboratories for analysis of solid tumours; an expert opinion on behalf of IQN Path ASBL.

PubMed

Deans, Zandra C; Costa, Jose Luis; Cree, Ian; Dequeker, Els; Edsjö, Anders; Henderson, Shirley; Hummel, Michael; Ligtenberg, Marjolijn Jl; Loddo, Marco; Machado, Jose Carlos; Marchetti, Antonio; Marquis, Katherine; Mason, Joanne; Normanno, Nicola; Rouleau, Etienne; Schuuring, Ed; Snelson, Keeda-Marie; Thunnissen, Erik; Tops, Bastiaan; Williams, Gareth; van Krieken, Han; Hall, Jacqueline A

2017-01-01

The clinical demand for mutation detection within multiple genes from a single tumour sample requires molecular diagnostic laboratories to develop rapid, high-throughput, highly sensitive, accurate and parallel testing within tight budget constraints. To meet this demand, many laboratories employ next-generation sequencing (NGS) based on small amplicons. Building on existing publications and general guidance for the clinical use of NGS and learnings from germline testing, the following guidelines establish consensus standards for somatic diagnostic testing, specifically for identifying and reporting mutations in solid tumours. These guidelines cover the testing strategy, implementation of testing within clinical service, sample requirements, data analysis and reporting of results. In conjunction with appropriate staff training and international standards for laboratory testing, these consensus standards for the use of NGS in molecular pathology of solid tumours will assist laboratories in implementing NGS in clinical services.

Implementation of Quality Systems in Nuclear Medicine: Why It Matters. An Outcome Analysis (Quality Management Audits in Nuclear Medicine Part III).

PubMed

Dondi, Maurizio; Paez, Diana; Torres, Leonel; Marengo, Mario; Delaloye, Angelika Bischof; Solanki, Kishor; Van Zyl Ellmann, Annare; Lobato, Enrique Estrada; Miller, Rodolfo Nunez; Giammarile, Francesco; Pascual, Thomas

2018-05-01

The International Atomic Energy Agency (IAEA) developed a comprehensive program-Quality Management Audits in Nuclear Medicine (QUANUM). This program covers all aspects of nuclear medicine practices including, but not limited to, clinical practice, management, operations, and services. The QUANUM program, which includes quality standards detailed in relevant checklists, aims at introducing a culture of comprehensive quality audit processes that are patient oriented, systematic, and outcome based. This paper will focus on the impact of the implementation of QUANUM on daily routine practices in audited centers. Thirty-seven centers, which had been externally audited by experts under IAEA auspices at least 1 year earlier, were invited to run an internal audit using the QUANUM checklists. The external audits also served as training in quality management and the use of QUANUM for the local teams, which were responsible of conducting the internal audits. Twenty-five out of the 37 centers provided their internal audit report, which was compared with the previous external audit. The program requires that auditors score each requirement within the QUANUM checklists on a scale of 0-4, where 0-2 means nonconformance and 3-4 means conformance to international regulations and standards on which QUANUM is based. Our analysis covering both general and clinical areas assessed changes on the conformance status on a binary manner and the level of conformance scores. Statistical analysis was performed using nonparametric statistical tests. The evaluation of the general checklists showed a global improvement on both the status and the levels of conformances (P < 0.01). The evaluation of the requirements by checklist also showed a significant improvement in all, with the exception of Hormones and Tumor marker determinations, where changes were not significant. Of the 25 evaluated institutions, 88% (22 of 25) and 92% (23 of 25) improved their status and levels of conformance, respectively. Fifty-five requirements, on average, increased from nonconformance to conformance status. In 8 key areas, the number of improved requirements was well above the average: Administration & Management (checklist 2); Radiation Protection & Safety (checklist 4); General Quality Assurance system (checklist 6); Imaging Equipment Quality Assurance or Quality Control (checklist 7); General Diagnostic (checklist 9); General Therapeutic (checklist 12); Radiopharmacy Level 1 (checklist 14); and Radiopharmacy Level 2 (checklist 15). Analysis of results related to clinical activities showed an overall positive impact on both the status and the level of conformance to international standards. Similar results were obtained for the most frequently performed clinical imaging and therapeutic procedures. Our study shows that the implementation of a comprehensive quality management system through the IAEA QUANUM program has a positive impact on nuclear medicine practices. Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.

Standard Generalized Markup Language for self-defining structured reports.

PubMed

Kahn, C E

1999-01-01

Structured reporting is the process of using standardized data elements and predetermined data-entry formats to record observations. The Standard Generalized Markup Language (SGML; International Standards Organization (ISO) 8879:1986)--an open, internationally accepted standard for document interchange was used to encode medical observations acquired in an Internet-based structured reporting system. The resulting report is self-documenting: it includes a definition of its allowable data fields and values encoded as a report-specific SGML document type definition (DTD). The data-entry forms, DTD, and report document instances are based on report specifications written in a simple, SGML-based language designed for that purpose. Reporting concepts can be linked with those of external vocabularies such as the Unified Medical Language System (UMLS) Metathesaurus. The use of open standards such as SGML is an important step in the creation of open, universally comprehensible structured reports.

Application of Microprocessor-Based Equipment in Nuclear Power Plants - Technical Basis for a Qualification Methodology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Korsah, K.

This document (1) summarizes the most significant findings of the ''Qualification of Advanced Instrumentation and Control (I&C) Systems'' program initiated by the Nuclear Regulatory Commission (NRC); (2) documents a comparative analysis of U.S. and European qualification standards; and (3) provides recommendations for enhancing regulatory guidance for environmental qualification of microprocessor-based safety-related systems. Safety-related I&C system upgrades of present-day nuclear power plants, as well as I&C systems of Advanced Light-Water Reactors (ALWRs), are expected to make increasing use of microprocessor-based technology. The Nuclear Regulatory Commission (NRC) recognized that the use of such technology may pose environmental qualification challenges different from current,more » analog-based I&C systems. Hence, it initiated the ''Qualification of Advanced Instrumentation and Control Systems'' program. The objectives of this confirmatory research project are to (1) identify any unique environmental-stress-related failure modes posed by digital technologies and their potential impact on the safety systems and (2) develop the technical basis for regulatory guidance using these findings. Previous findings from this study have been documented in several technical reports. This final report in the series documents a comparative analysis of two environmental qualification standards--Institute of Electrical and Electronics Engineers (IEEE) Std 323-1983 and International Electrotechnical Commission (IEC) 60780 (1998)--and provides recommendations for environmental qualification of microprocessor-based systems based on this analysis as well as on the findings documented in the previous reports. The two standards were chosen for this analysis because IEEE 323 is the standard used in the U.S. for the qualification of safety-related equipment in nuclear power plants, and IEC 60780 is its European counterpart. In addition, the IEC document was published in 1998, and should reflect any new qualification concerns, from the European perspective, with regard to the use of microprocessor-based safety systems in power plants.« less

Development of a reliable simulation-based test for diagnostic abdominal ultrasound with a pass/fail standard usable for mastery learning.

PubMed

Østergaard, Mia L; Nielsen, Kristina R; Albrecht-Beste, Elisabeth; Konge, Lars; Nielsen, Michael B

2018-01-01

This study aimed to develop a test with validity evidence for abdominal diagnostic ultrasound with a pass/fail-standard to facilitate mastery learning. The simulator had 150 real-life patient abdominal scans of which 15 cases with 44 findings were selected, representing level 1 from The European Federation of Societies for Ultrasound in Medicine and Biology. Four groups of experience levels were constructed: Novices (medical students), trainees (first-year radiology residents), intermediates (third- to fourth-year radiology residents) and advanced (physicians with ultrasound fellowship). Participants were tested in a standardized setup and scored by two blinded reviewers prior to an item analysis. The item analysis excluded 14 diagnoses. Both internal consistency (Cronbach's alpha 0.96) and inter-rater reliability (0.99) were good and there were statistically significant differences (p < 0.001) between all four groups, except the intermediate and advanced groups (p = 1.0). There was a statistically significant correlation between experience and test scores (Pearson's r = 0.82, p < 0.001). The pass/fail-standard failed all novices (no false positives) and passed all advanced (no false negatives). All intermediate participants and six out of 14 trainees passed. We developed a test for diagnostic abdominal ultrasound with solid validity evidence and a pass/fail-standard without any false-positive or false-negative scores. • Ultrasound training can benefit from competency-based education based on reliable tests. • This simulation-based test can differentiate between competency levels of ultrasound examiners. • This test is suitable for competency-based education, e.g. mastery learning. • We provide a pass/fail standard without false-negative or false-positive scores.

Dataset for forensic analysis of B-tree file system.

PubMed

Wani, Mohamad Ahtisham; Bhat, Wasim Ahmad

2018-06-01

Since B-tree file system (Btrfs) is set to become de facto standard file system on Linux (and Linux based) operating systems, Btrfs dataset for forensic analysis is of great interest and immense value to forensic community. This article presents a novel dataset for forensic analysis of Btrfs that was collected using a proposed data-recovery procedure. The dataset identifies various generalized and common file system layouts and operations, specific node-balancing mechanisms triggered, logical addresses of various data structures, on-disk records, recovered-data as directory entries and extent data from leaf and internal nodes, and percentage of data recovered.

[International Standards of Tuberculosis Care (ISTC)--comments from the German point of view].

PubMed

Castell, S; Bauer, T; Diel, R; Hedrich, A; Magdorf, K; Rüsch-Gerdes, S; Schaberg, T; Loddenkemper, R

2012-04-01

The "International Standards for Tuberculosis Care" (ISTC) were developed by the World Health Organisation (WHO) and others to provide internationally agreed and, if possible, evidence-based standards for tuberculosis care including the care by private providers who are not part of national tuberculosis programmes or health-care systems. Hence, the ISTC primarily address resource-restrained countries with high tuberculosis prevalence. In this article, the German translation of the 21 standards from 2009 is presented - addressing diagnostic and therapeutic standards, co-infection (especially with HIV) and public-health issues. The accompanying comments show how these standards have to be modified for Germany due to the medical resources available here and country-specific characteristics respectively. © Georg Thieme Verlag KG Stuttgart · New York.

Multi-Pulse Excitation for Underwater Analysis of Copper-Based Alloys Using a Novel Remote Laser-Induced Breakdown Spectroscopy (LIBS) System.

PubMed

Guirado, Salvador; Fortes, Francisco J; Laserna, J Javier

2016-04-01

In this work, the use of multi-pulse excitation has been evaluated as an effective solution to mitigate the preferential ablation of the most volatile elements, namely Sn, Pb, and Zn, observed during laser-induced breakdown spectroscopy (LIBS) analysis of copper-based alloys. The novel remote LIBS prototype used in this experiments featured both single-pulse (SP-LIBS) and multi-pulse excitation (MP-LIBS). The remote instrument is capable of performing chemical analysis of submersed materials up to a depth of 50 m. Laser-induced breakdown spectroscopy analysis was performed at air pressure settings simulating the conditions during a real subsea analysis. A set of five certified bronze standards with variable concentration of Cu, As, Sn, Pb, and Zn were used. In SP-LIBS, signal emission is strongly sensitive to ambient pressure. In this case, fractionation effect was observed. Multi-pulse excitation circumvents the effect of pressure over the quantitative analysis, thus avoiding the fractionation phenomena observed in single pulse LIBS. The use of copper as internal standard minimizes matrix effects and discrepancies due to variation in ablated mass. © The Author(s) 2016.

Validation of the RisingSun RS-651 Blood Pressure Monitor Based on Auscultation in Adults According to the ANSI/AAMI/ISO 81060-2:2013 Standard.

PubMed

She, Jin; Guan, Xizhou; Liu, Yanyong; Xiang, Haiyan

2016-12-01

This study validated the RisingSun RS-651 blood pressure (BP) monitor based on auscultation in adults according to the American National Standards Institute/Association for the Advancement of Medical Instrumentation/International Organization for Standardization (ANSI/AAMI/ISO) 81060-2:2013 standard. The RS-651 device was evaluated in a study of 97 participants. The same arm simultaneous method, as defined in the ANSI/AAMI/ISO standard, was used. The mean differences±standard deviation for criterion 1 were 0.8±2.3 mm Hg for systolic BP (SBP) and -0.1±2.9 mm Hg for diastolic BP (DBP). Analysis for criterion 2 resulted in values of 0.8±1.5 mm Hg for SBP and -0.1±2.1 mm Hg for DBP. All of the data fulfilled the ANSI/AAMI/ISO 81060-2:2013 standard requirements to pass the validation. The RisingSun RS-651 device can be recommended for both clinical and self/home use in adults according to the ANSI/AAMI/ISO 81060-2:2013 standard. © 2016 The Authors. The Journal of Clinical Hypertension Published by Wiley Periodicals, Inc.

Translating Radiometric Requirements for Satellite Sensors to Match International Standards.

PubMed

Pearlman, Aaron; Datla, Raju; Kacker, Raghu; Cao, Changyong

2014-01-01

International scientific standards organizations created standards on evaluating uncertainty in the early 1990s. Although scientists from many fields use these standards, they are not consistently implemented in the remote sensing community, where traditional error analysis framework persists. For a satellite instrument under development, this can create confusion in showing whether requirements are met. We aim to create a methodology for translating requirements from the error analysis framework to the modern uncertainty approach using the product level requirements of the Advanced Baseline Imager (ABI) that will fly on the Geostationary Operational Environmental Satellite R-Series (GOES-R). In this paper we prescribe a method to combine several measurement performance requirements, written using a traditional error analysis framework, into a single specification using the propagation of uncertainties formula. By using this approach, scientists can communicate requirements in a consistent uncertainty framework leading to uniform interpretation throughout the development and operation of any satellite instrument.

Translating Radiometric Requirements for Satellite Sensors to Match International Standards

PubMed Central

Pearlman, Aaron; Datla, Raju; Kacker, Raghu; Cao, Changyong

2014-01-01

International scientific standards organizations created standards on evaluating uncertainty in the early 1990s. Although scientists from many fields use these standards, they are not consistently implemented in the remote sensing community, where traditional error analysis framework persists. For a satellite instrument under development, this can create confusion in showing whether requirements are met. We aim to create a methodology for translating requirements from the error analysis framework to the modern uncertainty approach using the product level requirements of the Advanced Baseline Imager (ABI) that will fly on the Geostationary Operational Environmental Satellite R-Series (GOES-R). In this paper we prescribe a method to combine several measurement performance requirements, written using a traditional error analysis framework, into a single specification using the propagation of uncertainties formula. By using this approach, scientists can communicate requirements in a consistent uncertainty framework leading to uniform interpretation throughout the development and operation of any satellite instrument. PMID:26601032

[Accreditation of clinical laboratories based on ISO standards].

PubMed

Kawai, Tadashi

2004-11-01

International Organization for Standardization (ISO) have published two international standards (IS) to be used for accreditation of clinical laboratories; ISO/IEC 17025:1999 and ISO 15189:2003. Any laboratory accreditation body must satisfy the requirements stated in ISO/IEC Guide 58. In order to maintain the quality of the laboratory accreditation bodies worldwide, the International Laboratory Accreditation Cooperation (ILAC) has established the mutual recognition arrangement (MRA). In Japan, the International Accreditation Japan (IAJapan) and the Japan Accreditation Board for Conformity Assessment (JAB) are the members of the ILAC/MRA group. In 2003, the Japanese Committee for Clinical Laboratory Standards (JCCLS) and the JAB have established the Development Committee of Clinical Laboratory Accreditation Program (CLAP), in order to establish the CLAP, probably starting in 2005.

CAD-based stand-alone spacecraft radiation exposure analysis system: An application of the early man-tended Space Station

NASA Technical Reports Server (NTRS)

Appleby, M. H.; Golightly, M. J.; Hardy, A. C.

1993-01-01

Major improvements have been completed in the approach to analyses and simulation of spacecraft radiation shielding and exposure. A computer-aided design (CAD)-based system has been developed for determining the amount of shielding provided by a spacecraft and simulating transmission of an incident radiation environment to any point within or external to the vehicle. Shielding analysis is performed using a customized ray-tracing subroutine contained within a standard engineering modeling software package. This improved shielding analysis technique has been used in several vehicle design programs such as a Mars transfer habitat, pressurized lunar rover, and the redesigned international Space Station. Results of analysis performed for the Space Station astronaut exposure assessment are provided to demonastrate the applicability and versatility of the system.

Heat Transfer Analysis in Wire Bundles for Aerospace Vehicles

NASA Technical Reports Server (NTRS)

Rickman, S. L.; Iamello, C. J.

2016-01-01

Design of wiring for aerospace vehicles relies on an understanding of "ampacity" which refers to the current carrying capacity of wires, either, individually or in wire bundles. Designers rely on standards to derate allowable current flow to prevent exceedance of wire temperature limits due to resistive heat dissipation within the wires or wire bundles. These standards often add considerable margin and are based on empirical data. Commercial providers are taking an aggressive approach to wire sizing which challenges the conventional wisdom of the established standards. Thermal modelling of wire bundles may offer significant mass reduction in a system if the technique can be generalized to produce reliable temperature predictions for arbitrary bundle configurations. Thermal analysis has been applied to the problem of wire bundles wherein any or all of the wires within the bundle may carry current. Wire bundles present analytical challenges because the heat transfer path from conductors internal to the bundle is tortuous, relying on internal radiation and thermal interface conductance to move the heat from within the bundle to the external jacket where it can be carried away by convective and radiative heat transfer. The problem is further complicated by the dependence of wire electrical resistivity on temperature. Reduced heat transfer out of the bundle leads to higher conductor temperatures and, hence, increased resistive heat dissipation. Development of a generalized wire bundle thermal model is presented and compared with test data. The steady state heat balance for a single wire is derived and extended to the bundle configuration. The generalized model includes the effects of temperature varying resistance, internal radiation and thermal interface conductance, external radiation and temperature varying convective relief from the free surface. The sensitivity of the response to uncertainties in key model parameters is explored using Monte Carlo analysis.

Interference Analysis for an Aeronautical Mobile Airport Communications System

NASA Technical Reports Server (NTRS)

Wilson, Jeffrey D.; Kercewski, Robert J.

2010-01-01

The next generation of aeronautical communications for airport surface applications has been identified through a NASA research program and an international collaborative future communications study. The result, endorsed by both the United States and European regulatory agencies is called AeroMACS (Aeronautical Mobile Airport Communications System) and is based upon the IEEE 802.16e mobile wireless standard. Coordinated efforts to develop appropriate aviation standards for the AeroMACS system are now underway within RTCA (United States) and Eurocae (Europe). AeroMACS will be implemented in a recently allocated frequency band, 5091- 5150 MHz. As this band is also occupied by fixed satellite service uplinks, AeroMACS must be designed to avoid interference with this incumbent service. The aspects of AeroMACS operation that present potential interference to the fixed satellite service are under analysis in order to enable the definition of standards that assure that such interference will be avoided. The NASA Glenn Research Center has been involved in this analysis, and the first results of modeling and simulation efforts directed at this analysis are the subject of this paper.12

Interference Analysis for an Aeronautical Mobile Airport Communications System

NASA Technical Reports Server (NTRS)

Wilson, Jeffrey D.; Kerczewski, Robert J.

2011-01-01

The next generation of aeronautical communications for airport surface applications has been identified through a NASA research program and an international collaborative future communications study. The result, endorsed by both the United States and European regulatory agencies is called AeroMACS (Aeronautical Mobile Airport Communications System) and is based upon the IEEE 802.16e mobile wireless standard. Coordinated efforts to develop appropriate aviation standards for the AeroMACS system are now underway within RTCA (United States) and Eurocae (Europe). AeroMACS will be implemented in a recently allocated frequency band, 5091-5150 MHz. As this band is also occupied by fixed satellite service uplinks, AeroMACS must be designed to avoid interference with this incumbent service. The aspects of AeroMACS operation that present potential interference to the fixed satellite service are under analysis in order to enable the definition of standards that assure that such interference will be avoided. The NASA Glenn Research Center has been involved in this analysis, and the first results of modeling and simulation efforts directed at this analysis are the subject of this presentation.

Evaluation of medical record quality and communication skills among pediatric interns after standardized parent training history-taking in China.

PubMed

Yu, Mu Xue; Jiang, Xiao Yun; Li, Yi Juan; Shen, Zhen Yu; Zhuang, Si Qi; Gu, Yu Fen

2018-02-01

The effect of using standardized parent training history-taking on the quality of medical records and communication skills among pediatric interns was determined. Fifth-year interns who were undertaking a pediatric clinical practice rotation were randomized to intervention and control groups. All of the pediatric interns received history-taking training by lecture and bedside teaching. The pediatric interns in the intervention group also received standardized parent history-taking training. The following two outcome measures were used: the scores of medical records, which were written by the pediatric interns after history-taking from real parents of pediatric patients; and the communication assessment tool (CAT) assessed by real parents. The general information, history of present illness (HPI), past medical history, personal history, family history, diagnosis, diagnostic analysis, and differential diagnosis scores in the intervention group were significantly higher than the control group (p < 0.05). Assessment of the CAT indicated that the real parents were more satisfied with the pediatric interns in the intervention group. Standardized parent training history-taking is effective in improving the quality of medical records by pediatric interns. Standardized parent training history-taking is a superior teaching tool for clinical reasoning ability, as well as communication skills in clinical pediatric practice.

The right to health of prisoners in international human rights law.

PubMed

Lines, Rick

2008-01-01

This paper explores the health rights of prisoners as defined in international law, and the mechanisms that have been used to ensure the rights of persons in detention to realise the highest attainable standard of health. It examines this right as articulated within United Nations and regional human rights treaties, non-binding or so-called soft law instruments from international organisations and the jurisprudence of international human rights bodies. It explores the use of economic, social and cultural rights mechanisms, and those within civil and political rights, as they engage the right to health of prisoners, and identifies the minimum legal obligations of governments in order to remain compliant with human rights norms as defined within the international case law. In addressing these issues, this article adopts a holistic approach to the definition of the highest attainable standard of health. This includes a consideration of adequate standards of general medical care, including preventative health and mental health services. It also examines the question of environmental health, and those poor conditions of detention that may exacerbate health decline, disease transmission, mental illness or death. The paper examines the approach to prison health of the United Nations human rights system and its various monitoring bodies, as well as the regional human rights systems in Europe, Africa and the Americas. Based upon this analysis, the paper draws conclusions on the current fulfilment of the right to health of prisoners on an international scale, and proposes expanded mechanisms under the UN Convention against Torture and Other Cruel, Inhuman or Degrading Treatment to monitor and promote the health rights of prisoners at the international and domestic levels.

Analysis of drugs in human tissues by supercritical fluid extraction/immunoassay

NASA Astrophysics Data System (ADS)

Furton, Kenneth G.; Sabucedo, Alberta; Rein, Joseph; Hearn, W. L.

1997-02-01

A rapid, readily automated method has been developed for the quantitative analysis of phenobarbital from human liver tissues based on supercritical carbon dioxide extraction followed by fluorescence enzyme immunoassay. The method developed significantly reduces sample handling and utilizes the entire liver homogenate. The current method yields comparable recoveries and precision and does not require the use of an internal standard, although traditional GC/MS confirmation can still be performed on sample extracts. Additionally, the proposed method uses non-toxic, inexpensive carbon dioxide, thus eliminating the use of halogenated organic solvents.

Analysis of Wind Turbine Simulation Models: Assessment of Simplified versus Complete Methodologies: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Honrubia-Escribano, A.; Jimenez-Buendia, F.; Molina-Garcia, A.

This paper presents the current status of simplified wind turbine models used for power system stability analysis. This work is based on the ongoing work being developed in IEC 61400-27. This international standard, for which a technical committee was convened in October 2009, is focused on defining generic (also known as simplified) simulation models for both wind turbines and wind power plants. The results of the paper provide an improved understanding of the usability of generic models to conduct power system simulations.

Variation in worldwide incidence of amyotrophic lateral sclerosis: a meta-analysis.

PubMed

Marin, Benoît; Boumédiene, Farid; Logroscino, Giancarlo; Couratier, Philippe; Babron, Marie-Claude; Leutenegger, Anne Louise; Copetti, Massimilano; Preux, Pierre-Marie; Beghi, Ettore

2017-02-01

To assess the worldwide variation of amyotrophic lateral sclerosis (ALS) incidence, we performed a systematic review and meta-analysis of population-based data published to date. We reviewed Medline and Embase up to June 2015 and included all population-based studies of newly diagnosed ALS cases, using multiple sources for case ascertainment. ALS crude and standardized incidence (on age and sex using the US 2010 population) were calculated. Random effect meta-analysis and meta-regression were performed using the subcontinent as the main study level covariate. Sources of heterogeneity related to the characteristics of the study population and the study methodology were investigated. Among 3216 records, 44 studies were selected, covering 45 geographical areas in 11 sub-continents. A total of 13 146 ALS cases and 825 million person-years of follow-up (PYFU) were co-nsidered. The overall pooled worldwide crude ALS incidence was at 1.75 (1.55-1.96)/100 000 PYFU; 1.68 (1.50-1.85)/100 000 PYFU after standardization. Heterogeneity was identified in ALS standardized incidence between North Europe [1.89 (1.46-2.32)/100 000 PYFU] and East Asia [0.83 (0.42-1.24)/100 000 PYFU, China and Japan P = 0.001] or South Asia [0.73 (0.58-0.89)/100 000/PYFU Iran, P = 0.02]. Conversely, homogeneous rates have been reported in populations from Europe, North America and New Zealand [pooled ALS standardized incidence of 1.81 (1.66-1.97)/100 000 PYFU for those areas]. This review confirms a heterogeneous distribution worldwide of ALS, and sets the scene to sustain a collaborative study involving a wide international consortium to investigate the link between ancestry, environment and ALS incidence. © The Author 2016. Published by Oxford University Press on behalf of the International Epidemiological Association

The pluralization of the international: Resistance and alter-standardization in regenerative stem cell medicine

PubMed Central

Rosemann, Achim; Chaisinthop, Nattaka

2016-01-01

The article explores the formation of an international politics of resistance and ‘alter-standardization’ in regenerative stem cell medicine. The absence of internationally harmonized regulatory frameworks in the clinical stem cell field and the presence of lucrative business opportunities have resulted in the formation of transnational networks adopting alternative research standards and practices. These oppose, as a universal global standard, strict evidence-based medicine clinical research protocols as defined by scientists and regulatory agencies in highly developed countries. The emergence of transnational spaces of alter-standardization is closely linked to scientific advances in rapidly developing countries such as China and India, but calls for more flexible regulatory frameworks, and the legitimization of experimental for-profit applications outside of evidence-based medical care, are emerging increasingly also within more stringently regulated countries, such as the United States and countries in the European Union. We can observe, then, a trend toward the pluralization of the standards, practices, and concepts in the stem cell field. PMID:26983174

Analysis of Investigational Drugs in Biological Fluids. Method Development and Routine Assay. Appendix A.

DTIC Science & Technology

1997-02-13

AMINOPROPIOPHENONE IN DOG PLASMA 0 OCH 3 CH2 CH3 OCH2CHOHCH 2 OH H2 N& p-Aminopropiophenone Guaifenesin (WR 000,302) Internal Standard APPROVALS: This Analytical...40 - 80 il VOLUME: RUN TIME: 14 min (PAPP: 10.7 min; Guaifenesin (Internal Standard): 8.5 min) DETECTOR Wavelength: 316 nm SETTINGS: Absorption Range

Current trends in satellite based emergency mapping - the need for harmonisation

NASA Astrophysics Data System (ADS)

Voigt, Stefan

2013-04-01

During the past years, the availability and use of satellite image data to support disaster management and humanitarian relief organisations has largely increased. The automation and data processing techniques are greatly improving as well as the capacity in accessing and processing satellite imagery in getting better globally. More and more global activities via the internet and through global organisations like the United Nations or the International Charter Space and Major Disaster engage in the topic, while at the same time, more and more national or local centres engage rapid mapping operations and activities. In order to make even more effective use of this very positive increase of capacity, for the sake of operational provision of analysis results, for fast validation of satellite derived damage assessments, for better cooperation in the joint inter agency generation of rapid mapping products and for general scientific use, rapid mapping results in general need to be better harmonized, if not even standardized. In this presentation, experiences from various years of rapid mapping gained by the DLR Center for satellite based Crisis Information (ZKI) within the context of the national activities, the International Charter Space and Major Disasters, GMES/Copernicus etc. are reported. Furthermore, an overview on how automation, quality assurance and optimization can be achieved through standard operation procedures within a rapid mapping workflow is given. Building on this long term rapid mapping experience, and building on the DLR initiative to set in pace an "International Working Group on Satellite Based Emergency Mapping" current trends in rapid mapping are discussed and thoughts on how the sharing of rapid mapping information can be optimized by harmonizing analysis results and data structures are presented. Such an harmonization of analysis procedures, nomenclatures and representations of data as well as meta data are the basis to better cooperate within the global rapid mapping community throughout local/national, regional/supranational and global scales

Fast high-throughput method for the determination of acidity constants by capillary electrophoresis: I. Monoprotic weak acids and bases.

PubMed

Fuguet, Elisabet; Ràfols, Clara; Bosch, Elisabeth; Rosés, Martí

2009-04-24

A new and fast method to determine acidity constants of monoprotic weak acids and bases by capillary zone electrophoresis based on the use of an internal standard (compound of similar nature and acidity constant as the analyte) has been developed. This method requires only two electrophoretic runs for the determination of an acidity constant: a first one at a pH where both analyte and internal standard are totally ionized, and a second one at another pH where both are partially ionized. Furthermore, the method is not pH dependent, so an accurate measure of the pH of the buffer solutions is not needed. The acidity constants of several phenols and amines have been measured using internal standards of known pK(a), obtaining a mean deviation of 0.05 pH units compared to the literature values.

Information Technology: Critical Infrastructure and Key Resources Sector-Specific Plan as Input to the National Infrastructure Protection Plan

DTIC Science & Technology

2007-05-01

services by implementing a disaster recovery plan to restore an organization’s critical business functions. (DRII 2004). ISO 27001 An information...the International Organization for Standardization ( ISO )), the IT SSP bases the terms and definitions on those in the NIPP because the SSP is an annex...International Organization for Standardization/International Electrotechnical Commission ( ISO /IEC) 27000 Series, Information technology—Security

Report of the panel on international programs

NASA Technical Reports Server (NTRS)

Anderson, Allen Joel; Fuchs, Karl W.; Ganeka, Yasuhiro; Gaur, Vinod; Green, Andrew A.; Siegfried, W.; Lambert, Anthony; Rais, Jacub; Reighber, Christopher; Seeger, Herman

1991-01-01

The panel recommends that NASA participate and take an active role in the continuous monitoring of existing regional networks, the realization of high resolution geopotential and topographic missions, the establishment of interconnection of the reference frames as defined by different space techniques, the development and implementation of automation for all ground-to-space observing systems, calibration and validation experiments for measuring techniques and data, the establishment of international space-based networks for real-time transmission of high density space data in standardized formats, tracking and support for non-NASA missions, and the extension of state-of-the art observing and analysis techniques to developing nations.

Protocol for Standardizing High-to-Moderate Abundance Protein Biomarker Assessments Through an MRM-with-Standard-Peptides Quantitative Approach.

PubMed

Percy, Andrew J; Yang, Juncong; Chambers, Andrew G; Mohammed, Yassene; Miliotis, Tasso; Borchers, Christoph H

2016-01-01

Quantitative mass spectrometry (MS)-based approaches are emerging as a core technology for addressing health-related queries in systems biology and in the biomedical and clinical fields. In several 'omics disciplines (proteomics included), an approach centered on selected or multiple reaction monitoring (SRM or MRM)-MS with stable isotope-labeled standards (SIS), at the protein or peptide level, has emerged as the most precise technique for quantifying and screening putative analytes in biological samples. To enable the widespread use of MRM-based protein quantitation for disease biomarker assessment studies and its ultimate acceptance for clinical analysis, the technique must be standardized to facilitate precise and accurate protein quantitation. To that end, we have developed a number of kits for assessing method/platform performance, as well as for screening proposed candidate protein biomarkers in various human biofluids. Collectively, these kits utilize a bottom-up LC-MS methodology with SIS peptides as internal standards and quantify proteins using regression analysis of standard curves. This chapter details the methodology used to quantify 192 plasma proteins of high-to-moderate abundance (covers a 6 order of magnitude range from 31 mg/mL for albumin to 18 ng/mL for peroxidredoxin-2), and a 21-protein subset thereof. We also describe the application of this method to patient samples for biomarker discovery and verification studies. Additionally, we introduce our recently developed Qualis-SIS software, which is used to expedite the analysis and assessment of protein quantitation data in control and patient samples.

Statistical tools for transgene copy number estimation based on real-time PCR.

PubMed

Yuan, Joshua S; Burris, Jason; Stewart, Nathan R; Mentewab, Ayalew; Stewart, C Neal

2007-11-01

As compared with traditional transgene copy number detection technologies such as Southern blot analysis, real-time PCR provides a fast, inexpensive and high-throughput alternative. However, the real-time PCR based transgene copy number estimation tends to be ambiguous and subjective stemming from the lack of proper statistical analysis and data quality control to render a reliable estimation of copy number with a prediction value. Despite the recent progresses in statistical analysis of real-time PCR, few publications have integrated these advancements in real-time PCR based transgene copy number determination. Three experimental designs and four data quality control integrated statistical models are presented. For the first method, external calibration curves are established for the transgene based on serially-diluted templates. The Ct number from a control transgenic event and putative transgenic event are compared to derive the transgene copy number or zygosity estimation. Simple linear regression and two group T-test procedures were combined to model the data from this design. For the second experimental design, standard curves were generated for both an internal reference gene and the transgene, and the copy number of transgene was compared with that of internal reference gene. Multiple regression models and ANOVA models can be employed to analyze the data and perform quality control for this approach. In the third experimental design, transgene copy number is compared with reference gene without a standard curve, but rather, is based directly on fluorescence data. Two different multiple regression models were proposed to analyze the data based on two different approaches of amplification efficiency integration. Our results highlight the importance of proper statistical treatment and quality control integration in real-time PCR-based transgene copy number determination. These statistical methods allow the real-time PCR-based transgene copy number estimation to be more reliable and precise with a proper statistical estimation. Proper confidence intervals are necessary for unambiguous prediction of trangene copy number. The four different statistical methods are compared for their advantages and disadvantages. Moreover, the statistical methods can also be applied for other real-time PCR-based quantification assays including transfection efficiency analysis and pathogen quantification.

The Virtual Astronomical Observatory: Re-engineering access to astronomical data

NASA Astrophysics Data System (ADS)

Hanisch, R. J.; Berriman, G. B.; Lazio, T. J. W.; Emery Bunn, S.; Evans, J.; McGlynn, T. A.; Plante, R.

2015-06-01

The US Virtual Astronomical Observatory was a software infrastructure and development project designed both to begin the establishment of an operational Virtual Observatory (VO) and to provide the US coordination with the international VO effort. The concept of the VO is to provide the means by which an astronomer is able to discover, access, and process data seamlessly, regardless of its physical location. This paper describes the origins of the VAO, including the predecessor efforts within the US National Virtual Observatory, and summarizes its main accomplishments. These accomplishments include the development of both scripting toolkits that allow scientists to incorporate VO data directly into their reduction and analysis environments and high-level science applications for data discovery, integration, analysis, and catalog cross-comparison. Working with the international community, and based on the experience from the software development, the VAO was a major contributor to international standards within the International Virtual Observatory Alliance. The VAO also demonstrated how an operational virtual observatory could be deployed, providing a robust operational environment in which VO services worldwide were routinely checked for aliveness and compliance with international standards. Finally, the VAO engaged in community outreach, developing a comprehensive web site with on-line tutorials, announcements, links to both US and internationally developed tools and services, and exhibits and hands-on training at annual meetings of the American Astronomical Society and through summer schools and community days. All digital products of the VAO Project, including software, documentation, and tutorials, are stored in a repository for community access. The enduring legacy of the VAO is an increasing expectation that new telescopes and facilities incorporate VO capabilities during the design of their data management systems.

An Internal Standard for Assessing Phosphopeptide Recovery from Metal Ion/Oxide Enrichment Strategies

NASA Astrophysics Data System (ADS)

Paulo, Joao A.; Navarrete-Perea, Jose; Erickson, Alison R.; Knott, Jeffrey; Gygi, Steven P.

2018-04-01

Phosphorylation-mediated signaling pathways have major implications in cellular regulation and disease. However, proteins with roles in these pathways are frequently less abundant and phosphorylation is often sub-stoichiometric. As such, the efficient enrichment, and subsequent recovery of phosphorylated peptides, is vital. Mass spectrometry-based proteomics is a well-established approach for quantifying thousands of phosphorylation events in a single experiment. We designed a peptide internal standard-based assay directed toward sample preparation strategies for mass spectrometry analysis to understand better phosphopeptide recovery from enrichment strategies. We coupled mass-differential tandem mass tag (mTMT) reagents (specifically, TMTzero and TMTsuper-heavy), nine mass spectrometry-amenable phosphopeptides (phos9), and peak area measurements from extracted ion chromatograms to determine phosphopeptide recovery. We showcase this mTMT/phos9 recovery assay by evaluating three phosphopeptide enrichment workflows. Our assay provides data on the recovery of phosphopeptides, which complement other metrics, namely the number of identified phosphopeptides and enrichment specificity. Our mTMT/phos9 assay is applicable to any enrichment protocol in a typical experimental workflow irrespective of sample origin or labeling strategy. [Figure not available: see fulltext.

A drift correction optimization technique for the reduction of the inter-measurement dispersion of isotope ratios measured using a multi-collector plasma mass spectrometer

NASA Astrophysics Data System (ADS)

Doherty, W.; Lightfoot, P. C.; Ames, D. E.

2014-08-01

The effects of polynomial interpolation and internal standardization drift corrections on the inter-measurement dispersion (statistical) of isotope ratios measured with a multi-collector plasma mass spectrometer were investigated using the (analyte, internal standard) isotope systems of (Ni, Cu), (Cu, Ni), (Zn, Cu), (Zn, Ga), (Sm, Eu), (Hf, Re) and (Pb, Tl). The performance of five different correction factors was compared using a (statistical) range based merit function ωm which measures the accuracy and inter-measurement range of the instrument calibration. The frequency distribution of optimal correction factors over two hundred data sets uniformly favored three particular correction factors while the remaining two correction factors accounted for a small but still significant contribution to the reduction of the inter-measurement dispersion. Application of the merit function is demonstrated using the detection of Cu and Ni isotopic fractionation in laboratory and geologic-scale chemical reactor systems. Solvent extraction (diphenylthiocarbazone (Cu, Pb) and dimethylglyoxime (Ni) was used to either isotopically fractionate the metal during extraction using the method of competition or to isolate the Cu and Ni from the sample (sulfides and associated silicates). In the best case, differences in isotopic composition of ± 3 in the fifth significant figure could be routinely and reliably detected for Cu65/63 and Ni61/62. One of the internal standardization drift correction factors uses a least squares estimator to obtain a linear functional relationship between the measured analyte and internal standard isotope ratios. Graphical analysis demonstrates that the points on these graphs are defined by highly non-linear parametric curves and not two linearly correlated quantities which is the usual interpretation of these graphs. The success of this particular internal standardization correction factor was found in some cases to be due to a fortuitous, scale dependent, parametric curve effect.

Simultaneous quantitation of sphingoid bases by UPLC-ESI-MS/MS with identical 13C-encoded internal standards.

PubMed

Mirzaian, M; Wisse, P; Ferraz, M J; Marques, A R A; Gaspar, P; Oussoren, S V; Kytidou, K; Codée, J D C; van der Marel, G; Overkleeft, H S; Aerts, J M

2017-03-01

Free sphingoid bases (lysosphingolipids) of primary storage sphingolipids are increased in tissues and plasma of several sphingolipidoses. As shown earlier by us, sphingoid bases can be accurately quantified using UPLC-ESI-MS/MS, particularly in combination with identical 13 C-encoded internal standards. The feasibility of simultaneous quantitation of sphingoid bases in plasma specimens spiked with a mixture of such standards is here described. The sensitivity and linearity of detection is excellent for all examined sphingoid bases (sphingosine, sphinganine, hexosyl-sphingosine (glucosylsphingosine), hexosyl 2 -sphingosine (lactosylsphingosine), hexosyl 3 -sphingosine (globotriaosylsphingosine), phosphorylcholine-sphingosine) in the relevant concentration range and the measurements show very acceptable intra- and inter-assay variation (<10% average). Plasma samples of a series of male and female Gaucher Disease and Fabry Disease patients were analyzed with the multiplex assay. The obtained data compare well to those earlier determined for plasma globotriaosylsphingosine and glucosylsphingosine in GD and FD patients. The same approach can be also applied to measure sphingolipids in the same sample. Following extraction of sphingolipids from the same sample these can be converted to sphingoid bases by microwave exposure and subsequently quantified using 13 C-encoded internal standards. Copyright © 2017 Elsevier B.V. All rights reserved.

Development of primary standards for mass spectrometry to increase accuracy in quantifying environmental contaminants.

PubMed

Oates, R P; Mcmanus, Michelle; Subbiah, Seenivasan; Klein, David M; Kobelski, Robert

2017-07-14

Internal standards are essential in electrospray ionization liquid chromatography-mass spectrometry (ESI-LC-MS) to correct for systematic error associated with ionization suppression and/or enhancement. A wide array of instrument setups and interfaces has created difficulty in comparing the quantitation of absolute analyte response across laboratories. This communication demonstrates the use of primary standards as operational qualification standards for LC-MS instruments and their comparison with commonly accepted internal standards. In monitoring the performance of internal standards for perfluorinated compounds, potassium hydrogen phthalate (KHP) presented lower inter-day variability in instrument response than a commonly accepted deuterated perfluorinated internal standard (d3-PFOS), with percent relative standard deviations less than or equal to 6%. The inter-day precision of KHP was greater than d3-PFOS over a 28-day monitoring of perfluorooctanesulfonic acid (PFOS), across concentrations ranging from 0 to 100μg/L. The primary standard trometamol (Trizma) performed as well as known internal standards simeton and tris (2-chloroisopropyl) phosphate (TCPP), with intra-day precision of Trizma response as low as 7% RSD on day 28. The inter-day precision of Trizma response was found to be greater than simeton and TCPP, across concentrations of neonicotinoids ranging from 1 to 100μg/L. This study explores the potential of primary standards to be incorporated into LC-MS/MS methodology to improve the quantitative accuracy in environmental contaminant analysis. Copyright © 2017 Elsevier B.V. All rights reserved.

Comparison method for uranium determination in ore sample by inductively coupled plasma optical emission spectrometry (ICP-OES).

PubMed

Sert, Şenol

2013-07-01

A comparison method for the determination (without sample pre-concentration) of uranium in ore by inductively coupled plasma optical emission spectrometry (ICP-OES) has been performed. The experiments were conducted using three procedures: matrix matching, plasma optimization, and internal standardization for three emission lines of uranium. Three wavelengths of Sm were tested as internal standard for the internal standardization method. The robust conditions were evaluated using applied radiofrequency power, nebulizer argon gas flow rate, and sample uptake flow rate by considering the intensity ratio of the Mg(II) 280.270 nm and Mg(I) 285.213 nm lines. Analytical characterization of method was assessed by limit of detection and relative standard deviation values. The certificated reference soil sample IAEA S-8 was analyzed, and the uranium determination at 367.007 nm with internal standardization using Sm at 359.260 nm has been shown to improve accuracy compared with other methods. The developed method was used for real uranium ore sample analysis.

Design of a Slowed-Rotor Compound Helicopter for Future Joint Service Missions

DTIC Science & Technology

2010-01-01

achieves a 208kt top speed at engine MCP and 11,000ft/ISA while having 216hp/ton installed power, based on engine MRP and MTOW. Figure 33...Intermediate rated power ISA International Standard Atmosphere MCP Maximum continuous power MRP Maximum rated power MTOW Maximum Takeoff Weight NDARC...NASA Design and Analysis of Rotorcraft SFC Specific fuel consumption SRC Slowed-Rotor Compound Symbols σ Rotor solidity (geometric) CD Drag

Using standardized patients to evaluate hospital-based intervention outcomes.

PubMed

Li, Li; Lin, Chunqing; Guan, Jihui

2014-06-01

The standardized patient approach has proved to be an effective training tool for medical educators. This article explains the process of employing standardized patients in an HIV stigma reduction intervention in healthcare settings in China. The study was conducted in 40 hospitals in two provinces of China. One year after the stigma reduction intervention, standardized patients made unannounced visits to participating hospitals, randomly approached service providers on duty and presented symptoms related to HIV and disclosed HIV-positive test results. After each visit, the standardized patients evaluated their providers' attitudes and behaviours using a structured checklist. Standardized patients also took open-ended observation notes about their experience and the evaluation process. Seven standardized patients conducted a total of 217 assessments (108 from 20 hospitals in the intervention condition; 109 from 20 hospitals in the control condition). Based on a comparative analysis, the intervention hospitals received a better rating than the control hospitals in terms of general impression and universal precaution compliance as well as a lower score on stigmatizing attitudes and behaviours toward the standardized patients. Standardized patients are a useful supplement to traditional self-report assessments, particularly for measuring intervention outcomes that are sensitive or prone to social desirability. Published by Oxford University Press on behalf of the International Epidemiological Association © The Author 2013; all rights reserved.

INTERNATIONAL STANDARDS ON FOOD AND ENVIRONMENTAL RADIOACTIVITY MEASUREMENT FOR RADIOLOGICAL PROTECTION: STATUS AND PERSPECTIVES.

PubMed

Calmet, D; Ameon, R; Bombard, A; Brun, S; Byrde, F; Chen, J; Duda, J-M; Forte, M; Fournier, M; Fronka, A; Haug, T; Herranz, M; Husain, A; Jerome, S; Jiranek, M; Judge, S; Kim, S B; Kwakman, P; Loyen, J; LLaurado, M; Michel, R; Porterfield, D; Ratsirahonana, A; Richards, A; Rovenska, K; Sanada, T; Schuler, C; Thomas, L; Tokonami, S; Tsapalov, A; Yamada, T

2017-04-01

Radiological protection is a matter of concern for members of the public and thus national authorities are more likely to trust the quality of radioactivity data provided by accredited laboratories using common standards. Normative approach based on international standards aims to ensure the accuracy or validity of the test result through calibrations and measurements traceable to the International System of Units. This approach guarantees that radioactivity test results on the same types of samples are comparable over time and space as well as between different testing laboratories. Today, testing laboratories involved in radioactivity measurement have a set of more than 150 international standards to help them perform their work. Most of them are published by the International Standardization Organization (ISO) and the International Electrotechnical Commission (IEC). This paper reviews the most essential ISO standards that give guidance to testing laboratories at different stages from sampling planning to the transmission of the test report to their customers, summarizes recent activities and achievements and present the perspectives on new standards under development by the ISO Working Groups dealing with radioactivity measurement in connection with radiological protection. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

A Collaborative Evaluation of LC-MS/MS Based Methods for BMAA Analysis: Soluble Bound BMAA Found to Be an Important Fraction

PubMed Central

Faassen, Elisabeth J.; Antoniou, Maria G.; Beekman-Lukassen, Wendy; Blahova, Lucie; Chernova, Ekaterina; Christophoridis, Christophoros; Combes, Audrey; Edwards, Christine; Fastner, Jutta; Harmsen, Joop; Hiskia, Anastasia; Ilag, Leopold L.; Kaloudis, Triantafyllos; Lopicic, Srdjan; Lürling, Miquel; Mazur-Marzec, Hanna; Meriluoto, Jussi; Porojan, Cristina; Viner-Mozzini, Yehudit; Zguna, Nadezda

2016-01-01

Exposure to β-N-methylamino-l-alanine (BMAA) might be linked to the incidence of amyotrophic lateral sclerosis, Alzheimer’s disease and Parkinson’s disease. Analytical chemistry plays a crucial role in determining human BMAA exposure and the associated health risk, but the performance of various analytical methods currently employed is rarely compared. A CYANOCOST initiated workshop was organized aimed at training scientists in BMAA analysis, creating mutual understanding and paving the way towards interlaboratory comparison exercises. During this workshop, we tested different methods (extraction followed by derivatization and liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) analysis, or directly followed by LC-MS/MS analysis) for trueness and intermediate precision. We adapted three workup methods for the underivatized analysis of animal, brain and cyanobacterial samples. Based on recovery of the internal standard D3BMAA, the underivatized methods were accurate (mean recovery 80%) and precise (mean relative standard deviation 10%), except for the cyanobacterium Leptolyngbya. However, total BMAA concentrations in the positive controls (cycad seeds) showed higher variation (relative standard deviation 21%–32%), implying that D3BMAA was not a good indicator for the release of BMAA from bound forms. Significant losses occurred during workup for the derivatized method, resulting in low recovery (<10%). Most BMAA was found in a trichloroacetic acid soluble, bound form and we recommend including this fraction during analysis. PMID:26938542

A change of course: The importance to DoD of international standards for electronic commerce

NASA Astrophysics Data System (ADS)

Payne, Judith E.

1991-12-01

The U.S. Department of Defense (DoD) is committed to using electronic commerce in the future with the over 300,000 vendors interested in doing business with DoD. Electronic commerce will move DoD from a paper-based world to one based on electronic transactions enabled by the exchange of formatted, electronic messages referred to as electronic data interchange (EDI). With electronic commerce, DoD plans to reduce costs, increase effectiveness, and make it easier for vendors to deal with DoD. Benefits from electronic commerce are enhanced when many businesses use the same standards for EDI messages themselves and their transmission. The fewer standards used, the less time and resources must be spent translating messages and agreeing on how to use different standards. To enhance benefits and smooth the transition to electronic commerce for itself and its vendors, DoD has chosen to use the widely accepted American National Standards Institute (ANSI) X12 standards for EDI messages, coupled with international standards for delivering messages and organizing addresses. In the past 18 months, EDI standards sponsored by a United Nations body and serving the same purpose as ANSI X12 message standards have begun to gain wider acceptance internationally.

Meta-analysis: Problems with Russian Publications.

PubMed

Verbitskaya, E V

2015-01-01

Meta-analysis is a powerful tool to identify Evidence Based medical technologies (interventions) for use in every day practice. Meta-analysis uses statistical approaches to combine results from multiple studies in an effort to increase power (over individual studies), improve estimates of the size of the effect and/or to resolve uncertainty when reports disagree. Meta-analysis is a quantitative, formal study design used to systematically assess previous research studies to derive conclusions from this research. Meta-analysis may provide more precise estimate of the effect of treatment or risk factor for a disease, or other outcomes, than any individual study contributing to the pooled analysis.We have quite a substantial number of Russian medical publications, but not so many Meta-Analyses published in Russian. Russian publications are cited in English language papers not so often. A total of 90% of clinical studies included in published Meta-Analyses incorporate only English language papers. International studies or papers with Russian co-authors are published in English language. The main question is: what is the problem with inclusion of Russian medical publications in Meta-Analysis? The main reasons for this are the following: 1) It is difficult to find Russian papers, difficult to work with them and to work with Russian journals:a. There are single Russian Biomedical Journals, which are translated into English and are included in databases (PubMed, Scopus and other), despite the fact that all of them have English language abstracts.b. The majority the meta-analyses authors use in their work different citation management software such as the Mendeley, Reference Manager, ProCite, EndNote, and others. These citation management systems allow scientists to organize their own literature databases with internet searches and have adds-on for the Office programs what makes process of literature citation very convenient. The Internet sites of the majority of International Journals have built-in tools for saving citations to reference manager software. The majority of articles in Russian journals cannot be captured by citation management systems: they do not have special coding of articles descriptors.c. Some journals still have PDF files of the whole journal issue without dividing it into articles and do not provide any descriptors, making manual time-consuming input of information the only possibility. Moreover the context search of the article content is unavailable for search engines.2) The quality of research. This problem has been discussed for more than twenty years already. Still we have too many publications of poor quality of study design and statistical analysis. With the exception of pharmacological clinical tails, designed and supervised by international Pharma industry, many interventional studies, conducted in Russia, have methodological flaws inferring a high risk of bias:a. Absence of adequate control,b. No standard endpoints, duration of therapy and follow up,c. Absence of randomization and blinding,d. Low power of studies: sample sizes are calculated (if calculated at all) in such a way, that the main goal is to have as small sample size as possible. Very often statisticians have to solve the problem how to substantiate a small number of subjects, that sponsor could afford, instead of calculating the needed sample size to reach enough power.e. No standards of statistical analysis.f. Russian journals do not have standards for description and presentation of study results, in particular, results of statistical analysis (a reader even cannot see what is presented: standard deviation (SD) or standard error of the mean (SEM).We have a long standing experience in analysis of methodological and statistical quality of Russian biomedical publications and have found up to 80% publications with statistical and methodological errors and high risk of bias.In our practice, we had tried to perform two Meta-analyses for two local pharmaceutical products for prevention of stroke recurrence. For the first product, we did not found even two single Russian language studies suitable for the analysis (incomparable populations, different designs, endpoints, doses etc.). For the second product, only four studies had comparable populations and standard internationally approved scales for effectiveness analysis. However, the combinations of scales, the length of treatment and follow up differed widely, so that we could combine the results of only 2 or 3 studies for each end point. Russian researchers have to follow internationally recognised standards in study design, selection of endpoint, timelines and therapy regimens, data analysis and presentation of results. Russian journals need to develop consolidate rules for authors of clinical trials and epidemiological research of result reporting close to international standards. In this case the international Network EQUATOR (Enhancing the QUAlity and Transparency Of health Research http://www.equator-network.org/) is one to be taken into account. In addition, Russian Journals have to improve their online information for better interaction with search engines and citation managers.

DICOM for quantitative imaging biomarker development: a standards based approach to sharing clinical data and structured PET/CT analysis results in head and neck cancer research.

PubMed

Fedorov, Andriy; Clunie, David; Ulrich, Ethan; Bauer, Christian; Wahle, Andreas; Brown, Bartley; Onken, Michael; Riesmeier, Jörg; Pieper, Steve; Kikinis, Ron; Buatti, John; Beichel, Reinhard R

2016-01-01

Background. Imaging biomarkers hold tremendous promise for precision medicine clinical applications. Development of such biomarkers relies heavily on image post-processing tools for automated image quantitation. Their deployment in the context of clinical research necessitates interoperability with the clinical systems. Comparison with the established outcomes and evaluation tasks motivate integration of the clinical and imaging data, and the use of standardized approaches to support annotation and sharing of the analysis results and semantics. We developed the methodology and tools to support these tasks in Positron Emission Tomography and Computed Tomography (PET/CT) quantitative imaging (QI) biomarker development applied to head and neck cancer (HNC) treatment response assessment, using the Digital Imaging and Communications in Medicine (DICOM(®)) international standard and free open-source software. Methods. Quantitative analysis of PET/CT imaging data collected on patients undergoing treatment for HNC was conducted. Processing steps included Standardized Uptake Value (SUV) normalization of the images, segmentation of the tumor using manual and semi-automatic approaches, automatic segmentation of the reference regions, and extraction of the volumetric segmentation-based measurements. Suitable components of the DICOM standard were identified to model the various types of data produced by the analysis. A developer toolkit of conversion routines and an Application Programming Interface (API) were contributed and applied to create a standards-based representation of the data. Results. DICOM Real World Value Mapping, Segmentation and Structured Reporting objects were utilized for standards-compliant representation of the PET/CT QI analysis results and relevant clinical data. A number of correction proposals to the standard were developed. The open-source DICOM toolkit (DCMTK) was improved to simplify the task of DICOM encoding by introducing new API abstractions. Conversion and visualization tools utilizing this toolkit were developed. The encoded objects were validated for consistency and interoperability. The resulting dataset was deposited in the QIN-HEADNECK collection of The Cancer Imaging Archive (TCIA). Supporting tools for data analysis and DICOM conversion were made available as free open-source software. Discussion. We presented a detailed investigation of the development and application of the DICOM model, as well as the supporting open-source tools and toolkits, to accommodate representation of the research data in QI biomarker development. We demonstrated that the DICOM standard can be used to represent the types of data relevant in HNC QI biomarker development, and encode their complex relationships. The resulting annotated objects are amenable to data mining applications, and are interoperable with a variety of systems that support the DICOM standard.

International Community Development Statistical Bulletin. Spring 1968 General Edition.

ERIC Educational Resources Information Center

Community Development Foundation, New York, NY.

The Spring 1968 general edition of the International Community Development Statistical Bulletin describes its reporting system based on the International Standard Classification of Community Development Activities and a special project registration and progress form; briefly summarizes overall international data; and presents statistics on…

Citizen Observatories: A Standards Based Architecture

NASA Astrophysics Data System (ADS)

Simonis, Ingo

2015-04-01

A number of large-scale research projects are currently under way exploring the various components of citizen observatories, e.g. CITI-SENSE (http://www.citi-sense.eu), Citclops (http://citclops.eu), COBWEB (http://cobwebproject.eu), OMNISCIENTIS (http://www.omniscientis.eu), and WeSenseIt (http://www.wesenseit.eu). Common to all projects is the motivation to develop a platform enabling effective participation by citizens in environmental projects, while considering important aspects such as security, privacy, long-term storage and availability, accessibility of raw and processed data and its proper integration into catalogues and international exchange and collaboration systems such as GEOSS or INSPIRE. This paper describes the software architecture implemented for setting up crowdsourcing campaigns using standardized components, interfaces, security features, and distribution capabilities. It illustrates the Citizen Observatory Toolkit, a software suite that allows defining crowdsourcing campaigns, to invite registered and unregistered participants to participate in crowdsourcing campaigns, and to analyze, process, and visualize raw and quality enhanced crowd sourcing data and derived products. The Citizen Observatory Toolkit is not a single software product. Instead, it is a framework of components that are built using internationally adopted standards wherever possible (e.g. OGC standards from Sensor Web Enablement, GeoPackage, and Web Mapping and Processing Services, as well as security and metadata/cataloguing standards), defines profiles of those standards where necessary (e.g. SWE O&M profile, SensorML profile), and implements design decisions based on the motivation to maximize interoperability and reusability of all components. The toolkit contains tools to set up, manage and maintain crowdsourcing campaigns, allows building on-demand apps optimized for the specific sampling focus, supports offline and online sampling modes using modern cell phones with built-in sensing technologies, automates the upload of the raw data, and handles conflation services to match quality requirements and analysis challenges. The strict implementation of all components using internationally adopted standards ensures maximal interoperability and reusability of all components. The Citizen Observatory Toolkit is currently developed as part of the COBWEB research project. COBWEB is partially funded by the European Programme FP7/2007-2013 under grant agreement n° 308513; part of the topic ENV.2012.6.5-1 "Developing community based environmental monitoring and information systems using innovative and novel earth observation applications.

Higher-Order Theory: Structural/MicroAnalysis Code (HOTSMAC) Developed

NASA Technical Reports Server (NTRS)

Arnold, Steven M.

2002-01-01

The full utilization of advanced materials (be they composite or functionally graded materials) in lightweight aerospace components requires the availability of accurate analysis, design, and life-prediction tools that enable the assessment of component and material performance and reliability. Recently, a new commercially available software product called HOTSMAC (Higher-Order Theory--Structural/MicroAnalysis Code) was jointly developed by Collier Research Corporation, Engineered Materials Concepts LLC, and the NASA Glenn Research Center under funding provided by Glenn's Commercial Technology Office. The analytical framework for HOTSMAC is based on almost a decade of research into the coupled micromacrostructural analysis of heterogeneous materials. Consequently, HOTSMAC offers a comprehensive approach for analyzing/designing the response of components with various microstructural details, including certain advantages not always available in standard displacement-based finite element analysis techniques. The capabilities of HOTSMAC include combined thermal and mechanical analysis, time-independent and time-dependent material behavior, and internal boundary cells (e.g., those that can be used to represent internal cooling passages, see the preceding figure) to name a few. In HOTSMAC problems, materials can be randomly distributed and/or functionally graded (as shown in the figure, wherein the inclusions are distributed linearly), or broken down by strata, such as in the case of thermal barrier coatings or composite laminates.

HPLC-MRM relative quantification analysis of fatty acids based on a novel derivatization strategy.

PubMed

Cai, Tie; Ting, Hu; Xin-Xiang, Zhang; Jiang, Zhou; Jin-Lan, Zhang

2014-12-07

Fatty acids (FAs) are associated with a series of diseases including tumors, diabetes, and heart diseases. As potential biomarkers, FAs have attracted increasing attention from both biological researchers and the pharmaceutical industry. However, poor ionization efficiency, extreme diversity, strict dependence on internal standards and complicated multiple reaction monitoring (MRM) optimization protocols have challenged efforts to quantify FAs. In this work, a novel derivatization strategy based on 2,4-bis(diethylamino)-6-hydrazino-1,3,5-triazine was developed to enable quantification of FAs. The sensitivity of FA detection was significantly enhanced as a result of the derivatization procedure. FA quantities as low as 10 fg could be detected by high-performance liquid chromatography coupled with triple-quadrupole mass spectrometry. General MRM conditions were developed for any FA, which facilitated the quantification and extended the application of the method. The FA quantification strategy based on HPLC-MRM was carried out using deuterated derivatization reagents. "Heavy" derivatization reagents were used as internal standards (ISs) to minimize matrix effects. Prior to statistical analysis, amounts of each FA species were normalized by their corresponding IS, which guaranteed the accuracy and reliability of the method. FA changes in plasma induced by ageing were studied using this strategy. Several FA species were identified as potential ageing biomarkers. The sensitivity, accuracy, reliability, and full coverage of the method ensure that this strategy has strong potential for both biomarker discovery and lipidomic research.

Opinions of Art Teachers on the Standards of the International Society for Technology in Education: the Case of Western Mediterranean Region, Turkey

ERIC Educational Resources Information Center

Konak, Armagan

2018-01-01

The purpose of this study, which is based on qualitative data, is to reveal the opinions of art teachers on the teacher standards set by the International Society for Technology in Education. It has been observed that the majority of participants of a study group are not aware of these standards, use social networks but do not use mobile…

NoSQL Based 3D City Model Management System

NASA Astrophysics Data System (ADS)

Mao, B.; Harrie, L.; Cao, J.; Wu, Z.; Shen, J.

2014-04-01

To manage increasingly complicated 3D city models, a framework based on NoSQL database is proposed in this paper. The framework supports import and export of 3D city model according to international standards such as CityGML, KML/COLLADA and X3D. We also suggest and implement 3D model analysis and visualization in the framework. For city model analysis, 3D geometry data and semantic information (such as name, height, area, price and so on) are stored and processed separately. We use a Map-Reduce method to deal with the 3D geometry data since it is more complex, while the semantic analysis is mainly based on database query operation. For visualization, a multiple 3D city representation structure CityTree is implemented within the framework to support dynamic LODs based on user viewpoint. Also, the proposed framework is easily extensible and supports geoindexes to speed up the querying. Our experimental results show that the proposed 3D city management system can efficiently fulfil the analysis and visualization requirements.

Brief educational intervention improves content of intern handovers.

PubMed

Shaughnessy, Erin E; Ginsbach, Kimberly; Groeschl, Nicole; Bragg, Dawn; Weisgerber, Michael

2013-03-01

The Accreditation Council for Graduate Medical Education requires residency programs to ensure safe patient handovers and to document resident competency in handover communication, yet there are few evidence-based curricula teaching resident handover skills. We assessed the immediate and sustained impact of a brief educational intervention on pediatrics intern handover skills. Interns at a freestanding children's hospital participated in an intervention that included a 1-hour educational workshop on components of high-quality handovers, as well as implementation of a standardized handover format. The format, SAFETIPS, includes patient information, current diagnosis and assessment, patient acuity, a focused plan, a baseline exam, a to-do list, anticipatory guidance, and potential pointers and pitfalls. Important communication behaviors, such as paraphrasing key information, were addressed. Quality of intern handovers was evaluated using a simulated encounter 2 weeks before, 2 weeks after, and 7 months after the workshop. Two trained, blinded, independent observers scored the videotaped encounters. All 27 interns rotating at the Children's Hospital consented to participate in the study, and 20 attended the workshop. We included all participant data in the analysis, regardless of workshop attendance. Following the intervention, intern reporting of patient acuity improved from 13% to 92% (P < .001), and gains were maintained 7 months later. Rates of key communication behaviors, such as paraphrasing critical information, did not improve. A brief educational workshop promoting standardized handovers improved the inclusion of essential information during intern handovers, and these improvements were sustained over time. The intervention did not improve key communication behaviors.

Social and ethical analysis in health technology assessment.

PubMed

Tantivess, Sripen

2014-05-01

This paper presents a review of the domestic and international literature on the assessment of the social and ethical implications of health technologies. It gives an overview of the key concepts, principles, and approaches that should be taken into account when conducting a social and ethical analysis within health technology assessment (HTA). Although there is growing consensus among healthcare experts that the social and ethical ramifications of a given technology should be examined before its adoption, the demand for this kind of analysis among policy-makers around the world, including in Thailand, has so far been lacking. Currently decision-makers mainly base technology adoption decisions using evidence on clinical effectiveness, value for money, and budget impact, while social and ethical aspects have been neglected. Despite the recognized importance of considering equity, justice, and social issues when making decisions regarding health resource allocation, the absence of internationally-accepted principles and methodologies, among other factors, hinders research in these areas. Given that developing internationally agreed standards takes time, it has been recommended that priority be given to defining processes that are justifiable, transparent, and contestable. A discussion of the current situation in Thailand concerning social and ethical analysis of health technologies is also presented.

Multiplex cDNA quantification method that facilitates the standardization of gene expression data

PubMed Central

Gotoh, Osamu; Murakami, Yasufumi; Suyama, Akira

2011-01-01

Microarray-based gene expression measurement is one of the major methods for transcriptome analysis. However, current microarray data are substantially affected by microarray platforms and RNA references because of the microarray method can provide merely the relative amounts of gene expression levels. Therefore, valid comparisons of the microarray data require standardized platforms, internal and/or external controls and complicated normalizations. These requirements impose limitations on the extensive comparison of gene expression data. Here, we report an effective approach to removing the unfavorable limitations by measuring the absolute amounts of gene expression levels on common DNA microarrays. We have developed a multiplex cDNA quantification method called GEP-DEAN (Gene expression profiling by DCN-encoding-based analysis). The method was validated by using chemically synthesized DNA strands of known quantities and cDNA samples prepared from mouse liver, demonstrating that the absolute amounts of cDNA strands were successfully measured with a sensitivity of 18 zmol in a highly multiplexed manner in 7 h. PMID:21415008

Editorial quality, diffusion and bibliometric indicators of the Revista Espaãnola de Enfermedades Digestivas.

PubMed

López-Cózar, E D; Ruiz-Pérez, R; Jiménez-Contreras, E

1999-01-01

To evaluate the editorial quality, diffusion, relevance of the scientific content, and the publication practices of the specialised journal Revista Española de Enfermedades Digestivas. We checked 136 parameters based on ISO standards, the recommendations of scientific and editorial organisations, and studies of scientific editing and international publishing practices for biomedical journals. Diffusion was calculated using national and international databases, specialised libraries in Spain, and Internet sources. The analysis of the scientific content and publication practices was based on bibliometric indicators for the journal, authorship, and contributions. The sample for this study comprised six alternate issues of volume number 88 (1996), the last issue of this volume, and the first issue of volume 89 (1997). The samples used for the bibliometric analysis varied depending on the characteristics of specific indicators and the availability of information. The overall mean value for compliance with standards was 46.1%, while the real mean was calculated at 72.21%. The editorial procedures at the journal are similar to those of analogous international journals. The Revista Española de Enfermedades Digestivas is included in international databases of biomedical journals, and in the interdisciplinary international database SCI. It was found to be present in 70% of the medical libraries of Spanish universities, and in 73% of the hospital libraries studied. Bibliometric indicators showed co-authorship to be 5.5%; the origin of the authors grouped by province and by type of institutional affiliations showed 27.8% of all authors to be from Madrid, and that more were affiliated with general hospitals than with university hospitals. The mean delay between initial receipt of a manuscript and its publication was 300 days. Cocitation analysis gave the journal a central position amongst the 38 Spanish biomedical journals considered representative of the field. The journal's impact factor for 1996 was 0.260. The Revista Española de Enfermedades Digestivas is a high-quality vehicle of research results, and has acceptable internal editorial procedures. The journal is widely distributed, though its visibility on the Internet should be improved. Co-authorship is similar to that seen in other medical journals. Steps should be taken to make this journal better known within Spain, and to reduce the delay between the initial receipt and the final publication of manuscripts. Its impact factor is increasing steadily.

The quantitative surface analysis of an antioxidant additive in a lubricant oil matrix by desorption electrospray ionization mass spectrometry

PubMed Central

Da Costa, Caitlyn; Reynolds, James C; Whitmarsh, Samuel; Lynch, Tom; Creaser, Colin S

2013-01-01

RATIONALE Chemical additives are incorporated into commercial lubricant oils to modify the physical and chemical properties of the lubricant. The quantitative analysis of additives in oil-based lubricants deposited on a surface without extraction of the sample from the surface presents a challenge. The potential of desorption electrospray ionization mass spectrometry (DESI-MS) for the quantitative surface analysis of an oil additive in a complex oil lubricant matrix without sample extraction has been evaluated. METHODS The quantitative surface analysis of the antioxidant additive octyl (4-hydroxy-3,5-di-tert-butylphenyl)propionate in an oil lubricant matrix was carried out by DESI-MS in the presence of 2-(pentyloxy)ethyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate as an internal standard. A quadrupole/time-of-flight mass spectrometer fitted with an in-house modified ion source enabling non-proximal DESI-MS was used for the analyses. RESULTS An eight-point calibration curve ranging from 1 to 80 µg/spot of octyl (4-hydroxy-3,5-di-tert-butylphenyl)propionate in an oil lubricant matrix and in the presence of the internal standard was used to determine the quantitative response of the DESI-MS method. The sensitivity and repeatability of the technique were assessed by conducting replicate analyses at each concentration. The limit of detection was determined to be 11 ng/mm2 additive on spot with relative standard deviations in the range 3–14%. CONCLUSIONS The application of DESI-MS to the direct, quantitative surface analysis of a commercial lubricant additive in a native oil lubricant matrix is demonstrated. © 2013 The Authors. Rapid Communications in Mass Spectrometry published by John Wiley & Sons, Ltd. PMID:24097398

Information Systems Security Management: A Review and a Classification of the ISO Standards

NASA Astrophysics Data System (ADS)

Tsohou, Aggeliki; Kokolakis, Spyros; Lambrinoudakis, Costas; Gritzalis, Stefanos

The need for common understanding and agreement of functional and non-functional requirements is well known and understood by information system designers. This is necessary for both: designing the "correct" system and achieving interoperability with other systems. Security is maybe the best example of this need. If the understanding of the security requirements is not the same for all involved parties and the security mechanisms that will be implemented do not comply with some globally accepted rules and practices, then the system that will be designed will not necessarily achieve the desired security level and it will be very difficult to securely interoperate with other systems. It is therefore clear that the role and contribution of international standards to the design and implementation of security mechanisms is dominant. In this paper we provide a state of the art review on information security management standards published by the International Organization for Standardization and the International Electrotechnical Commission. Such an analysis is meaningful to security practitioners for an efficient management of information security. Moreover, the classification of the standards in the clauses of ISO/IEC 27001:2005 that results from our analysis is expected to provide assistance in dealing with the plethora of security standards.

Cobalt internal standard for Ni to assist the simultaneous determination of Mo and Ni in plant materials by high-resolution continuum source graphite furnace atomic absorption spectrometry employing direct solid sample analysis.

PubMed

de Babos, Diego Victor; Bechlin, Marcos André; Barros, Ariane Isis; Ferreira, Edilene Cristina; Gomes Neto, José Anchieta; de Oliveira, Silvana Ruella

2016-05-15

A new method is proposed for the simultaneous determination of Mo and Ni in plant materials by high-resolution continuum source graphite furnace atomic absorption spectrometry (HR-CS GFAAS), employing direct solid sample analysis (DSS) and internal standardization (IS). Cobalt was used as internal standard to minimize matrix effects during Ni determinations, enabling the use of aqueous standards for calibration. Correlation coefficients for the calibration curves were typically better than 0.9937. The performance of the method was checked by analysis of six plant certified reference materials, and the results for Mo and Ni were in agreement with the certified values (95% confidence level, t-test). Analysis was made of different types of plant materials used as renewable sources of energy, including sugarcane leaves, banana tree fiber, soybean straw, coffee pods, orange bagasse, peanut hulls, and sugarcane bagasse. The concentrations found for Mo and Ni ranged from 0.08 to 0.63 ng mg(-1) and from 0.41 to 6.92 ng mg(-1), respectively. Precision (RSD) varied from 2.1% to 11% for Mo and from 3.7% to 10% for Ni. Limits of quantification of 0.055 and 0.074 ng were obtained for Mo and Ni, respectively. Copyright © 2016 Elsevier B.V. All rights reserved.

Assessing Faculty Experiences with and Perceptions of an Internal Quality Assurance Process for Undergraduate Distributed Learning Courses: A Pilot Study

ERIC Educational Resources Information Center

Rucker, Ryan; Edwards, Karen; Frass, Lydia R.

2015-01-01

To ensure that online courses match traditional classes' quality, some institutions are implementing internal standards for online course design and quality review. The University of South Carolina created the Distributed Learning Quality Review program, based on "Quality Matters'" standards. It was designed to be faculty-guided, as…

18O-labeled proteome reference as global internal standards for targeted quantification by selected reaction monitoring-mass spectrometry.

PubMed

Kim, Jong-Seo; Fillmore, Thomas L; Liu, Tao; Robinson, Errol; Hossain, Mahmud; Champion, Boyd L; Moore, Ronald J; Camp, David G; Smith, Richard D; Qian, Wei-Jun

2011-12-01

Selected reaction monitoring (SRM)-MS is an emerging technology for high throughput targeted protein quantification and verification in biomarker discovery studies; however, the cost associated with the application of stable isotope-labeled synthetic peptides as internal standards can be prohibitive for screening a large number of candidate proteins as often required in the preverification phase of discovery studies. Herein we present a proof of concept study using an (18)O-labeled proteome reference as global internal standards (GIS) for SRM-based relative quantification. The (18)O-labeled proteome reference (or GIS) can be readily prepared and contains a heavy isotope ((18)O)-labeled internal standard for every possible tryptic peptide. Our results showed that the percentage of heavy isotope ((18)O) incorporation applying an improved protocol was >99.5% for most peptides investigated. The accuracy, reproducibility, and linear dynamic range of quantification were further assessed based on known ratios of standard proteins spiked into the labeled mouse plasma reference. Reliable quantification was observed with high reproducibility (i.e. coefficient of variance <10%) for analyte concentrations that were set at 100-fold higher or lower than those of the GIS based on the light ((16)O)/heavy ((18)O) peak area ratios. The utility of (18)O-labeled GIS was further illustrated by accurate relative quantification of 45 major human plasma proteins. Moreover, quantification of the concentrations of C-reactive protein and prostate-specific antigen was illustrated by coupling the GIS with standard additions of purified protein standards. Collectively, our results demonstrated that the use of (18)O-labeled proteome reference as GIS provides a convenient, low cost, and effective strategy for relative quantification of a large number of candidate proteins in biological or clinical samples using SRM.

MTS dye based colorimetric CTLL-2 cell proliferation assay for product release and stability monitoring of interleukin-15: assay qualification, standardization and statistical analysis.

PubMed

Soman, Gopalan; Yang, Xiaoyi; Jiang, Hengguang; Giardina, Steve; Vyas, Vinay; Mitra, George; Yovandich, Jason; Creekmore, Stephen P; Waldmann, Thomas A; Quiñones, Octavio; Alvord, W Gregory

2009-08-31

A colorimetric cell proliferation assay using soluble tetrazolium salt [(CellTiter 96(R) Aqueous One Solution) cell proliferation reagent, containing the (3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium, inner salt) and an electron coupling reagent phenazine ethosulfate], was optimized and qualified for quantitative determination of IL-15 dependent CTLL-2 cell proliferation activity. An in-house recombinant Human (rHu)IL-15 reference lot was standardized (IU/mg) against an international reference standard. Specificity of the assay for IL-15 was documented by illustrating the ability of neutralizing anti-IL-15 antibodies to block the product specific CTLL-2 cell proliferation and the lack of blocking effect with anti-IL-2 antibodies. Under the defined assay conditions, the linear dose-response concentration range was between 0.04 and 0.17ng/ml of the rHuIL-15 produced in-house and 0.5-3.0IU/ml for the international standard. Statistical analysis of the data was performed with the use of scripts written in the R Statistical Language and Environment utilizing a four-parameter logistic regression fit analysis procedure. The overall variation in the ED(50) values for the in-house reference standard from 55 independent estimates performed over the period of 1year was 12.3% of the average. Excellent intra-plate and within-day/inter-plate consistency was observed for all four parameter estimates in the model. Different preparations of rHuIL-15 showed excellent intra-plate consistency in the parameter estimates corresponding to the lower and upper asymptotes as well as to the 'slope' factor at the mid-point. The ED(50) values showed statistically significant differences for different lots and for control versus stressed samples. Three R-scripts improve data analysis capabilities allowing one to describe assay variations, to draw inferences between data sets from formal statistical tests, and to set up improved assay acceptance criteria based on comparability and consistency in the four parameters of the model. The assay is precise, accurate and robust and can be fully validated. Applications of the assay were established including process development support, release of the rHuIL-15 product for pre-clinical and clinical studies, and for monitoring storage stability.

Physics-Based Fragment Acceleration Modeling for Pressurized Tank Burst Risk Assessments

NASA Technical Reports Server (NTRS)

Manning, Ted A.; Lawrence, Scott L.

2014-01-01

As part of comprehensive efforts to develop physics-based risk assessment techniques for space systems at NASA, coupled computational fluid and rigid body dynamic simulations were carried out to investigate the flow mechanisms that accelerate tank fragments in bursting pressurized vessels. Simulations of several configurations were compared to analyses based on the industry-standard Baker explosion model, and were used to formulate an improved version of the model. The standard model, which neglects an external fluid, was found to agree best with simulation results only in configurations where the internal-to-external pressure ratio is very high and fragment curvature is small. The improved model introduces terms that accommodate an external fluid and better account for variations based on circumferential fragment count. Physics-based analysis was critical in increasing the model's range of applicability. The improved tank burst model can be used to produce more accurate risk assessments of space vehicle failure modes that involve high-speed debris, such as exploding propellant tanks and bursting rocket engines.

Future Direction of IMIA Standardization

PubMed Central

Kimura, M.; Ogishima, S.; Shabo, A.; Kim, I. K.; Parisot, C.; de Faria Leao, B.

2014-01-01

Summary Objectives Standardization in the field of health informatics has increased its importance and global alliance for establishing interoperability and compatibility internationally. Standardization has been organized by standard development organizations (SDOs) such as ISO (International Organization for Standardization), CEN (European Committee for Standardization), IHE (Integrating the Healthcare Enterprise), and HL7 (Health Level 7), etc. This paper reports the status of these SDOs’ activities. Methods In this workshop, we reviewed the past activities and the current situation of standardization in health care informatics with the standard development organizations such as ISO, CEN, IHE, and HL7. Then we discussed the future direction of standardization in health informatics toward “future medicine” based on standardized technologies. Results We could share the status of each SDO through exchange of opinions in the workshop. Some WHO members joined our discussion to support this constructive activity. Conclusion At this meeting, the workshop speakers have been appointed as new members of the IMIA working groups of Standards in Health Care Informatics (WG16). We could reach to the conclusion that we collaborate for the international standardization in health informatics toward “future medicine”. PMID:25123729

Rapid PCR-mediated synthesis of competitor molecules for accurate quantification of beta(2) GABA(A) receptor subunit mRNA.

PubMed

Vela, J; Vitorica, J; Ruano, D

2001-12-01

We describe a fast and easy method for the synthesis of competitor molecules based on non-specific conditions of PCR. RT-competitive PCR is a sensitive technique that allows quantification of very low quantities of mRNA molecules in small tissue samples. This technique is based on the competition established between the native and standard templates for nucleotides, primers or other factors during PCR. Thus, the most critical parameter is the use of good internal standards to generate a standard curve from which the amount of native sequences can be properly estimated. At the present time different types of internal standards and methods for their synthesis have been described. Normally, most of these methods are time-consuming and require the use of different sets of primers, different rounds of PCR or specific modifications, such as site-directed mutagenesis, that need subsequent analysis of the PCR products. Using our method, we obtained in a single round of PCR and with the same primer pair, competitor molecules that were successfully used in RT-competitive PCR experiments. The principal advantage of this method is high versatility and economy. Theoretically it is possible to synthesize a specific competitor molecule for each primer pair used. Finally, using this method we have been able to quantify the increase in the expression of the beta(2) GABA(A) receptor subunit mRNA that occurs during rat hippocampus development.

How Residents Develop Trust in Interns: A Multi-Institutional Mixed-Methods Study.

PubMed

Sheu, Leslie; O'Sullivan, Patricia S; Aagaard, Eva M; Tad-Y, Darlene; Harrell, Heather E; Kogan, Jennifer R; Nixon, James; Hollander, Harry; Hauer, Karen E

2016-10-01

Although residents trust interns to provide patient care, little is known about how trust forms. Using a multi-institutional mixed-methods study design, the authors interviewed (March-September 2014) internal medicine (IM) residents in their second or third postgraduate year at a single institution to address how they develop trust in interns. Transcript analysis using grounded theory yielded a model for resident trust. Authors tested (January-March 2015) the model with residents from five IM programs using a two-section quantitative survey (38 items; 31 rated 0 = not at all to 100 = very much; 7 rated 0 = strongly disagree to 100 = strongly agree) to identify influences on how residents form trust. Qualitative analysis of 29 interviews yielded 14 themes within five previously identified factors of trust (resident, intern, relationship, task, and context). Of 478 residents, 376 (78.7%) completed the survey. Factor analysis yielded 11 factors that influence trust. Respondents rated interns' characteristics (reliability, competence, and propensity to make errors) highest when indicating importance to trust (respective means 86.3 [standard deviation = 9.7], 76.4 [12.9], and 75.8 [20.0]). They also rated contextual factors highly as influencing trust (access to an electronic medical record, duty hours, and patient characteristics; respective means 79.8 [15.3], 73.1 [14.4], and 71.9 [20.0]). Residents form trust based on primarily intern- and context-specific factors. Residents appear to consider trust in a way that prioritizes interns' execution of essential patient care tasks safely within the complexities and constraints of the hospital environment.

Standardized, Interdepartmental, Simulation-Based Central Line Insertion Course Closes an Educational Gap and Improves Intern Comfort with the Procedure.

PubMed

Grudziak, Joanna; Herndon, Blair; Dancel, Ria D; Arora, Harendra; Tignanelli, Christopher J; Phillips, Michael R; Crowner, Jason R; True, Nicholas A; Kiser, Andy C; Brown, Rebecca F; Goodell, Harry P; Murty, Neil; Meyers, Michael O; Montgomery, Sean P

2017-06-01

Central line placement is a common procedure, routinely performed by junior residents in medical and surgical departments. Before this project, no standardized instructional course on the insertion of central lines existed at our institution, and few interns had received formal ultrasound training. Interns from five departments participated in a simulation-based central line insertion course. Intern familiarity with the procedure and with ultrasound, as well as their prior experience with line placement and their level of comfort, was assessed. Of the 99 interns in participating departments, 45 per cent had been trained as of October 2015. Forty-one per cent were female. The majority (59.5%) had no prior formal ultrasound training, and 46.0 per cent had never placed a line as primary operator. Scores increased significantly, from a precourse score mean of 13.7 to a postcourse score mean of 16.1, P < 0.001. All three of the self-reported measures of comfort with ultrasound also improved significantly. All interns reported the course was "very much" helpful, and 100 per cent reported they felt "somewhat" or "much" more comfortable with the procedure after attendance. To our knowledge, this is the first hospital-wide, standardized, simulation-based central line insertion course in the United States. Preliminary results indicate overwhelming satisfaction with the course, better ultrasound preparedness, and improved comfort with central line insertion.

Collaborative study for the establishment of the 4(th) International Standard for Streptomycin.

PubMed

Jorajuria, S; Raphalen, C; Dujardin, V; Daas, A

2015-01-01

An international collaborative study was organised to establish the 4(th) World Health Organization (WHO) International Standard (IS) for Streptomycin. Fourteen laboratories from different countries participated. Potencies of the candidate material were estimated by microbiological assays with sensitive micro-organisms. To ensure continuity between consecutive batches, the 3(rd) IS for Streptomycin was used as a reference. Based on the results of the study, the 4(th) IS for Streptomycin was adopted at the meeting of the WHO Expert Committee for Biological Standardization (ECBS) in 2015 with an assigned potency of 76 000 International Units (IU) per vial. The 4(th) IS for Streptomycin is available from the European Directorate for the Quality of Medicines & HealthCare (EDQM).

A Timing Estimation Method Based-on Skewness Analysis in Vehicular Wireless Networks.

PubMed

Cui, Xuerong; Li, Juan; Wu, Chunlei; Liu, Jian-Hang

2015-11-13

Vehicle positioning technology has drawn more and more attention in vehicular wireless networks to reduce transportation time and traffic accidents. Nowadays, global navigation satellite systems (GNSS) are widely used in land vehicle positioning, but most of them are lack precision and reliability in situations where their signals are blocked. Positioning systems base-on short range wireless communication are another effective way that can be used in vehicle positioning or vehicle ranging. IEEE 802.11p is a new real-time short range wireless communication standard for vehicles, so a new method is proposed to estimate the time delay or ranges between vehicles based on the IEEE 802.11p standard which includes three main steps: cross-correlation between the received signal and the short preamble, summing up the correlated results in groups, and finding the maximum peak using a dynamic threshold based on the skewness analysis. With the range between each vehicle or road-side infrastructure, the position of neighboring vehicles can be estimated correctly. Simulation results were presented in the International Telecommunications Union (ITU) vehicular multipath channel, which show that the proposed method provides better precision than some well-known timing estimation techniques, especially in low signal to noise ratio (SNR) environments.

Simulation improves procedural protocol adherence during central venous catheter placement: a randomized-controlled trial

PubMed Central

Peltan, Ithan D.; Shiga, Takashi; Gordon, James A.; Currier, Paul F.

2015-01-01

Background Simulation training may improve proficiency at and reduces complications from central venous catheter (CVC) placement, but the scope of simulation’s effect remains unclear. This randomized controlled trial evaluated the effects of a pragmatic CVC simulation program on procedural protocol adherence, technical skill, and patient outcomes. Methods Internal medicine interns were randomized to standard training for CVC insertion or standard training plus simulation-based mastery training. Standard training involved a lecture, a video-based online module, and instruction by the supervising physician during actual CVC insertions. Intervention-group subjects additionally underwent supervised training on a venous access simulator until they demonstrated procedural competence. Raters evaluated interns’ performance during internal jugular CVC placement on actual patients in the medical intensive care unit. Generalized estimating equations were used to account for outcome clustering within trainees. Results We observed 52 interns place 87 CVCs. Simulation-trained interns exhibited better adherence to prescribed procedural technique than interns who received only standard training (p=0.024). There were no significant differences detected in first-attempt or overall cannulation success rates, mean needle passes, global assessment scores or complication rates. Conclusions Simulation training added to standard training improved protocol adherence during CVC insertion by novice practitioners. This study may have been too small to detect meaningful differences in venous cannulation proficiency and other clinical outcomes, highlighting the difficulty of patient-centered simulation research in settings where poor outcomes are rare. For high-performing systems, where protocol deviations may provide an important proxy for rare procedural complications, simulation may improve CVC insertion quality and safety. PMID:26154250

Why SGML? Why Now?

ERIC Educational Resources Information Center

Marcoux, Yves; Sevigny, Martin

1997-01-01

Defines Standard Generalized Markup Language (SGML), a format for electronic documents that provides documentary information for efficient accessibility, dissemination, and preservation. Compares SGML to Open Document Architecture (ODA) based on standards by the International Organization for Standardization (ISO), and describes the principles and…

Standards for the calibration of extensometers

NASA Astrophysics Data System (ADS)

Loveday, Malcolm S.

1991-10-01

The consequences of the impending publication of a new European Standard, BS EN 10002 Pt 4 'Metallic Materials: Verification of Extensometers Used in Uniaxial Testing', which was based on the equivalent International Standard ISO 9513, are considered within the context of the new standard superceding the present British Standard, BS 3846. The three standards are compared and the differences are highlighted.

Guidelines for Assessment of Gait and Reference Values for Spatiotemporal Gait Parameters in Older Adults: The Biomathics and Canadian Gait Consortiums Initiative

PubMed Central

Beauchet, Olivier; Allali, Gilles; Sekhon, Harmehr; Verghese, Joe; Guilain, Sylvie; Steinmetz, Jean-Paul; Kressig, Reto W.; Barden, John M.; Szturm, Tony; Launay, Cyrille P.; Grenier, Sébastien; Bherer, Louis; Liu-Ambrose, Teresa; Chester, Vicky L.; Callisaya, Michele L.; Srikanth, Velandai; Léonard, Guillaume; De Cock, Anne-Marie; Sawa, Ryuichi; Duque, Gustavo; Camicioli, Richard; Helbostad, Jorunn L.

2017-01-01

Background: Gait disorders, a highly prevalent condition in older adults, are associated with several adverse health consequences. Gait analysis allows qualitative and quantitative assessments of gait that improves the understanding of mechanisms of gait disorders and the choice of interventions. This manuscript aims (1) to give consensus guidance for clinical and spatiotemporal gait analysis based on the recorded footfalls in older adults aged 65 years and over, and (2) to provide reference values for spatiotemporal gait parameters based on the recorded footfalls in healthy older adults free of cognitive impairment and multi-morbidities. Methods: International experts working in a network of two different consortiums (i.e., Biomathics and Canadian Gait Consortium) participated in this initiative. First, they identified items of standardized information following the usual procedure of formulation of consensus findings. Second, they merged databases including spatiotemporal gait assessments with GAITRite® system and clinical information from the “Gait, cOgnitiOn & Decline” (GOOD) initiative and the Generation 100 (Gen 100) study. Only healthy—free of cognitive impairment and multi-morbidities (i.e., ≤ 3 therapeutics taken daily)—participants aged 65 and older were selected. Age, sex, body mass index, mean values, and coefficients of variation (CoV) of gait parameters were used for the analyses. Results: Standardized systematic assessment of three categories of items, which were demographics and clinical information, and gait characteristics (clinical and spatiotemporal gait analysis based on the recorded footfalls), were selected for the proposed guidelines. Two complementary sets of items were distinguished: a minimal data set and a full data set. In addition, a total of 954 participants (mean age 72.8 ± 4.8 years, 45.8% women) were recruited to establish the reference values. Performance of spatiotemporal gait parameters based on the recorded footfalls declined with increasing age (mean values and CoV) and demonstrated sex differences (mean values). Conclusions: Based on an international multicenter collaboration, we propose consensus guidelines for gait assessment and spatiotemporal gait analysis based on the recorded footfalls, and reference values for healthy older adults. PMID:28824393

Improving global data infrastructures for more effective and scalable analysis of Earth and environmental data: the Australian NCI NERDIP Approach

NASA Astrophysics Data System (ADS)

Evans, Ben; Wyborn, Lesley; Druken, Kelsey; Richards, Clare; Trenham, Claire; Wang, Jingbo; Rozas Larraondo, Pablo; Steer, Adam; Smillie, Jon

2017-04-01

The National Computational Infrastructure (NCI) facility hosts one of Australia's largest repositories (10+ PBytes) of research data collections spanning datasets from climate, coasts, oceans, and geophysics through to astronomy, bioinformatics, and the social sciences domains. The data are obtained from national and international sources, spanning a wide range of gridded and ungridded (i.e., line surveys, point clouds) data, and raster imagery, as well as diverse coordinate reference projections and resolutions. Rather than managing these data assets as a digital library, whereby users can discover and download files to personal servers (similar to borrowing 'books' from a 'library'), NCI has built an extensive and well-integrated research data platform, the National Environmental Research Data Interoperability Platform (NERDIP, http://nci.org.au/data-collections/nerdip/). The NERDIP architecture enables programmatic access to data via standards-compliant services for high performance data analysis, and provides a flexible cloud-based environment to facilitate the next generation of transdisciplinary scientific research across all data domains. To improve use of modern scalable data infrastructures that are focused on efficient data analysis, the data organisation needs to be carefully managed including performance evaluations of projections and coordinate systems, data encoding standards and formats. A complication is that we have often found multiple domain vocabularies and ontologies are associated with equivalent datasets. It is not practical for individual dataset managers to determine which standards are best to apply to their dataset as this could impact accessibility and interoperability. Instead, they need to work with data custodians across interrelated communities and, in partnership with the data repository, the international scientific community to determine the most useful approach. For the data repository, this approach is essential to enable different disciplines and research communities to invoke new forms of analysis and discovery in an increasingly complex data-rich environment. Driven by the heterogeneity of Earth and environmental datasets, NCI developed a Data Quality/Data Assurance Strategy to ensure consistency is maintained within and across all datasets, as well as functionality testing to ensure smooth interoperability between products, tools, and services. This is particularly so for collections that contain data generated from multiple data acquisition campaigns, often using instruments and models that have evolved over time. By implementing the NCI Data Quality Strategy we have seen progressive improvement in the integration and quality of the datasets across the different subject domains, and through this, the ease by which the users can access data from this major data infrastructure. By both adhering to international standards and also contributing to extensions of these standards, data from the NCI NERDIP platform can be federated with data from other globally distributed data repositories and infrastructures. The NCI approach builds on our experience working with the astronomy and climate science communities, which have been internationally coordinating such interoperability standards within their disciplines for some years. The results of our work so far demonstrate more could be done in the Earth science, solid earth and environmental communities, particularly through establishing better linkages between international/national community efforts such as EPOS, ENVRIplus, EarthCube, AuScope and the Research Data Alliance.

Assessment of Telomere Length, Phenotype, and DNA Content

PubMed Central

Kelesidis, Theodoros; Schmid, Ingrid

2017-01-01

Telomere sequences at the end of chromosomes control somatic cell division; therefore, telomere length in a given cell population provides information about its replication potential. This unit describes a method for flow cytometric measurement of telomere length in subpopulations using fluorescence in situ hybridization of fluorescently-labeled probes (Flow-FISH) without prior cell separation. After cells are stained for surface immunofluorescence, antigen-antibody complexes are covalently cross-linked onto cell membranes before FISH with a telomere-specific probe. Cells with long telomeres are included as internal standards. Addition of a DNA dye permits exclusion of proliferating cells during data analysis. DNA ploidy measurements of cells of interest and internal standard are performed on separate aliquots in parallel to Flow-FISH. Telomere fluorescence of G0/1 cells of subpopulations and internal standards obtained from Flow-FISH are normalized for DNA ploidy, and telomere length in subsets of interest is expressed as a fraction of the internal standard telomere length. PMID:28055113

Assessment of Telomere Length, Phenotype, and DNA Content.

PubMed

Kelesidis, Theodoros; Schmid, Ingrid

2017-01-05

Telomere sequences at the end of chromosomes control somatic cell division; therefore, telomere length in a given cell population provides information about its replication potential. This unit describes a method for flow cytometric measurement of telomere length in subpopulations using fluorescence in situ hybridization of fluorescently-labeled probes (Flow-FISH) without prior cell separation. After cells are stained for surface immunofluorescence, antigen-antibody complexes are covalently cross-linked onto cell membranes before FISH with a telomere-specific probe. Cells with long telomeres are included as internal standards. Addition of a DNA dye permits exclusion of proliferating cells during data analysis. DNA ploidy measurements of cells of interest and internal standard are performed on separate aliquots in parallel to Flow-FISH. Telomere fluorescence of G 0/1 cells of subpopulations and internal standards obtained from Flow-FISH are normalized for DNA ploidy, and telomere length in subsets of interest is expressed as a fraction of the internal standard telomere length. © 2017 by John Wiley & Sons, Inc. Copyright © 2017 John Wiley & Sons, Inc.

The Globalization of Science Education

ERIC Educational Resources Information Center

DeBoer, George E.

2011-01-01

Standards-based science education, with its emphasis on monitoring and accountability, is rapidly becoming a key part of the globalization of science education. Standards-based testing within countries is increasingly being used to determine the effectiveness of a country's educational system, and international testing programs such as Programme…

Health level 7 development framework for medication administration.

PubMed

Kim, Hwa Sun; Cho, Hune

2009-01-01

We propose the creation of a standard data model for medication administration activities through the development of a clinical document architecture using the Health Level 7 Development Framework process based on an object-oriented analysis and the development method of Health Level 7 Version 3. Medication administration is the most common activity performed by clinical professionals in healthcare settings. A standardized information model and structured hospital information system are necessary to achieve evidence-based clinical activities. A virtual scenario is used to demonstrate the proposed method of administering medication. We used the Health Level 7 Development Framework and other tools to create the clinical document architecture, which allowed us to illustrate each step of the Health Level 7 Development Framework in the administration of medication. We generated an information model of the medication administration process as one clinical activity. It should become a fundamental conceptual model for understanding international-standard methodology by healthcare professionals and nursing practitioners with the objective of modeling healthcare information systems.

Comprehensive Auditing in Nuclear Medicine Through the International Atomic Energy Agency Quality Management Audits in Nuclear Medicine Program. Part 2: Analysis of Results.

PubMed

Dondi, Maurizio; Torres, Leonel; Marengo, Mario; Massardo, Teresa; Mishani, Eyal; Van Zyl Ellmann, Annare; Solanki, Kishor; Bischof Delaloye, Angelika; Lobato, Enrique Estrada; Miller, Rodolfo Nunez; Ordonez, Felix Barajas; Paez, Diana; Pascual, Thomas

2017-11-01

The International Atomic Energy Agency has developed a program, named Quality Management Audits in Nuclear Medicine (QUANUM), to help its Member States to check the status of their nuclear medicine practices and their adherence to international reference standards, covering all aspects of nuclear medicine, including quality assurance/quality control of instrumentation, radiopharmacy (further subdivided into levels 1, 2, and 3, according to complexity of work), radiation safety, clinical applications, as well as managerial aspects. The QUANUM program is based on both internal and external audits and, with specifically developed Excel spreadsheets, it helps assess the level of conformance (LoC) to those previously defined quality standards. According to their level of implementation, the level of conformance to requested standards; 0 (absent) up to 4 (full conformance). Items scored 0, 1, and 2 are considered non-conformance; items scored 3 and 4 are considered conformance. To assess results of the audit missions performed worldwide over the last 8 years, a retrospective analysis has been run on reports from a total of 42 audit missions in 39 centers, three of which had been re-audited. The analysis of all audit reports has shown an overall LoC of 73.9 ± 8.3% (mean ± standard deviation), ranging between 56.6% and 87.9%. The highest LoC has been found in the area of clinical services (83.7% for imaging and 87.9% for therapy), whereas the lowest levels have been found for Radiopharmacy Level 2 (56.6%); Computer Systems and Data Handling (66.6%); and Evaluation of the Quality Management System (67.6%). Prioritization of non-conformances produced a total of 1687 recommendations in the final audit report. Depending on the impact on safety and daily clinical activities, they were further classified as critical (requiring immediate action; n = 276; 16% of the total); major (requiring action in relatively short time, typically from 3 to 6 months; n = 604; 36%); whereas the remaining 807 (48%) were classified as minor, that is, to be addressed whenever possible. The greatest proportion of recommendations has been found in the category "Managerial, Organization and Documentation" (26%); "Staff Radiation Protection and Safety" (17.3%); "Radiopharmaceuticals Preparation, Dispensing and Handling" (15.8%); and "Quality Assurance/Quality Control" and "Management of Equipment and Software" (11.4%). The lowest level of recommendations belongs to the item "Human Resources" (4%). The QUANUM program proved applicable to a wide variety of institutions, from small practices to larger centers with PET/CT and cyclotrons. Clinical services rendered to patients showed a good compliance with international standards, whereas issues related to radiation protection of both staff and patients will require a higher degree of attention. This is a relevant feedback for the International Atomic Energy Agency with regard to the effective translation of safety recommendations into routine practice. Training on drafting and application of standard operating procedures should also be considered a priority. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Methodology for Evaluating Cost-effectiveness of Commercial Energy Code Changes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, Philip R.; Liu, Bing

This document lays out the U.S. Department of Energy’s (DOE’s) method for evaluating the cost-effectiveness of energy code proposals and editions. The evaluation is applied to provisions or editions of the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) Standard 90.1 and the International Energy Conservation Code (IECC). The method follows standard life-cycle cost (LCC) economic analysis procedures. Cost-effectiveness evaluation requires three steps: 1) evaluating the energy and energy cost savings of code changes, 2) evaluating the incremental and replacement costs related to the changes, and 3) determining the cost-effectiveness of energy code changes based on those costs andmore » savings over time.« less

Factor structure of the functional movement screen in marine officer candidates.

PubMed

Kazman, Josh B; Galecki, Jeffrey M; Lisman, Peter; Deuster, Patricia A; OʼConnor, Francis G

2014-03-01

Functional movement screening (FMS) is a musculoskeletal assessment that is intended to fill a gap between preparticipation examinations and performance tests. Functional movement screening consists of 7 standardized movements involving multiple muscle groups that are rated 0-3 during performance; scores are combined into a final score, which is intended to predict injury risk. This use of a sum-score in this manner assumes that the items are unidimensional and scores are internally consistent, which are measures of internal reliability. Despite research into the FMS' predictive value and interrater reliability, research has not assessed its psychometric properties. The present study is a standard psychometric analysis of the FMS and is the first to assess the internal consistency and factor structure of the FMS, using Cronbach's alpha and exploratory factor analysis (EFA). Using a cohort of 877 male and 57 female Marine officer candidates who performed the FMS, EFA of polychoric correlations with varimax rotation was conducted to explore the structure of the FMS. Tests were repeated on the original scores, which integrated feelings of pain during movement (0-3), and then on scores discounting the pain instruction and based only on the performance (1-3), to determine whether pain ratings affected the factor structure. The average FMS score was 16.7 ± 1.8. Cronbach's alpha was 0.39. Exploratory factor analysis availed 2 components accounting for 21 and 17% and consisting of separate individual movements (shoulder mobility and deep squat, respectively). Analysis on scores discounting pain showed similar results. The factor structures were not interpretable, and the low Cronbach's alpha suggests a lack of internal consistency in FMS sum scores. Results do not offer support for validity of the FMS sum score as a unidimensional construct. In the absence of additional psychometric research, caution is warranted when using the FMS sum score.

Object Management Group object transaction service based on an X/Open and International Organization for Standardization open systems interconnection transaction processing kernel

NASA Astrophysics Data System (ADS)

Liang, J.; Sédillot, S.; Traverson, B.

1997-09-01

This paper addresses federation of a transactional object standard - Object Management Group (OMG) object transaction service (OTS) - with the X/Open distributed transaction processing (DTP) model and International Organization for Standardization (ISO) open systems interconnection (OSI) transaction processing (TP) communication protocol. The two-phase commit propagation rules within a distributed transaction tree are similar in the X/Open, ISO and OMG models. Building an OTS on an OSI TP protocol machine is possible because the two specifications are somewhat complementary. OTS defines a set of external interfaces without specific internal protocol machine, while OSI TP specifies an internal protocol machine without any application programming interface. Given these observations, and having already implemented an X/Open two-phase commit transaction toolkit based on an OSI TP protocol machine, we analyse the feasibility of using this implementation as a transaction service provider for OMG interfaces. Based on the favourable result of this feasibility study, we are implementing an OTS compliant system, which, by initiating the extensibility and openness strengths of OSI TP, is able to provide interoperability between X/Open DTP and OMG OTS models.

Variance analysis refines overhead cost control.

PubMed

Cooper, J C; Suver, J D

1992-02-01

Many healthcare organizations may not fully realize the benefits of standard cost accounting techniques because they fail to routinely report volume variances in their internal reports. If overhead allocation is routinely reported on internal reports, managers can determine whether billing remains current or lost charges occur. Healthcare organizations' use of standard costing techniques can lead to more realistic performance measurements and information system improvements that alert management to losses from unrecovered overhead in time for corrective action.

Uncertainty evaluation in normalization of isotope delta measurement results against international reference materials.

PubMed

Meija, Juris; Chartrand, Michelle M G

2018-01-01

Isotope delta measurements are normalized against international reference standards. Although multi-point normalization is becoming a standard practice, the existing uncertainty evaluation practices are either undocumented or are incomplete. For multi-point normalization, we present errors-in-variables regression models for explicit accounting of the measurement uncertainty of the international standards along with the uncertainty that is attributed to their assigned values. This manuscript presents framework to account for the uncertainty that arises due to a small number of replicate measurements and discusses multi-laboratory data reduction while accounting for inevitable correlations between the laboratories due to the use of identical reference materials for calibration. Both frequentist and Bayesian methods of uncertainty analysis are discussed.

Application to Noninvasive Measurement of Blood Components Based on Infrared Spectroscopy

NASA Astrophysics Data System (ADS)

Tamura, Kazuto; Ishizawa, Hiroaki; Fujita, Keiichi; Kaneko, Wataru; Morikawa, Tomotaka; Toba, Eiji; Kobayashi, Hideo

Recently, lifestyle diseases (diabetics, hyperlipemia etc.) have been steadily increasing, because change of diet, lack of exercise, increase an alcoholic intake, and increase a stress. It is a matter of vital importance to us. About tens of millions of people in Japan have approached the danger of lifestyle diseases. So they have to do a blood test to make sure that they have controlled physical condition themselves. Therefore, they have to measure blood components again and again. So, they are burden too heavy. This paper describes a new noninvasive measurement of blood components based on optical sensing. This uses Fourier transform infrared spectroscopy of attenuated total reflection. In order to study, the influence of individual difference, the internal standard method was introduced. This paper describes the detail of the internal standard method and its effect to the blood components calibration. Significant improvement was obtained by using the internal standard.

High-throughput sample processing and sample management; the functional evolution of classical cytogenetic assay towards automation.

PubMed

Ramakumar, Adarsh; Subramanian, Uma; Prasanna, Pataje G S

2015-11-01

High-throughput individual diagnostic dose assessment is essential for medical management of radiation-exposed subjects after a mass casualty. Cytogenetic assays such as the Dicentric Chromosome Assay (DCA) are recognized as the gold standard by international regulatory authorities. DCA is a multi-step and multi-day bioassay. DCA, as described in the IAEA manual, can be used to assess dose up to 4-6 weeks post-exposure quite accurately but throughput is still a major issue and automation is very essential. The throughput is limited, both in terms of sample preparation as well as analysis of chromosome aberrations. Thus, there is a need to design and develop novel solutions that could utilize extensive laboratory automation for sample preparation, and bioinformatics approaches for chromosome-aberration analysis to overcome throughput issues. We have transitioned the bench-based cytogenetic DCA to a coherent process performing high-throughput automated biodosimetry for individual dose assessment ensuring quality control (QC) and quality assurance (QA) aspects in accordance with international harmonized protocols. A Laboratory Information Management System (LIMS) is designed, implemented and adapted to manage increased sample processing capacity, develop and maintain standard operating procedures (SOP) for robotic instruments, avoid data transcription errors during processing, and automate analysis of chromosome-aberrations using an image analysis platform. Our efforts described in this paper intend to bridge the current technological gaps and enhance the potential application of DCA for a dose-based stratification of subjects following a mass casualty. This paper describes one such potential integrated automated laboratory system and functional evolution of the classical DCA towards increasing critically needed throughput. Published by Elsevier B.V.

Multiple Time-of-Flight/Time-of-Flight Events in a Single Laser Shot for Improved Matrix-Assisted Laser Desorption/Ionization Tandem Mass Spectrometry Quantification.

PubMed

Prentice, Boone M; Chumbley, Chad W; Hachey, Brian C; Norris, Jeremy L; Caprioli, Richard M

2016-10-04

Quantitative matrix-assisted laser desorption/ionization time-of-flight (MALDI TOF) approaches have historically suffered from poor accuracy and precision mainly due to the nonuniform distribution of matrix and analyte across the target surface, matrix interferences, and ionization suppression. Tandem mass spectrometry (MS/MS) can be used to ensure chemical specificity as well as improve signal-to-noise ratios by eliminating interferences from chemical noise, alleviating some concerns about dynamic range. However, conventional MALDI TOF/TOF modalities typically only scan for a single MS/MS event per laser shot, and multiplex assays require sequential analyses. We describe here new methodology that allows for multiple TOF/TOF fragmentation events to be performed in a single laser shot. This technology allows the reference of analyte intensity to that of the internal standard in each laser shot, even when the analyte and internal standard are quite disparate in m/z, thereby improving quantification while maintaining chemical specificity and duty cycle. In the quantitative analysis of the drug enalapril in pooled human plasma with ramipril as an internal standard, a greater than 4-fold improvement in relative standard deviation (<10%) was observed as well as improved coefficients of determination (R 2 ) and accuracy (>85% quality controls). Using this approach we have also performed simultaneous quantitative analysis of three drugs (promethazine, enalapril, and verapamil) using deuterated analogues of these drugs as internal standards.

Best-Matched Internal Standard Normalization in Liquid Chromatography-Mass Spectrometry Metabolomics Applied to Environmental Samples.

PubMed

Boysen, Angela K; Heal, Katherine R; Carlson, Laura T; Ingalls, Anitra E

2018-01-16

The goal of metabolomics is to measure the entire range of small organic molecules in biological samples. In liquid chromatography-mass spectrometry-based metabolomics, formidable analytical challenges remain in removing the nonbiological factors that affect chromatographic peak areas. These factors include sample matrix-induced ion suppression, chromatographic quality, and analytical drift. The combination of these factors is referred to as obscuring variation. Some metabolomics samples can exhibit intense obscuring variation due to matrix-induced ion suppression, rendering large amounts of data unreliable and difficult to interpret. Existing normalization techniques have limited applicability to these sample types. Here we present a data normalization method to minimize the effects of obscuring variation. We normalize peak areas using a batch-specific normalization process, which matches measured metabolites with isotope-labeled internal standards that behave similarly during the analysis. This method, called best-matched internal standard (B-MIS) normalization, can be applied to targeted or untargeted metabolomics data sets and yields relative concentrations. We evaluate and demonstrate the utility of B-MIS normalization using marine environmental samples and laboratory grown cultures of phytoplankton. In untargeted analyses, B-MIS normalization allowed for inclusion of mass features in downstream analyses that would have been considered unreliable without normalization due to obscuring variation. B-MIS normalization for targeted or untargeted metabolomics is freely available at https://github.com/IngallsLabUW/B-MIS-normalization .

Report of Official Foreign Travel to Germany, May 16-June 1, 2001

DOE Office of Scientific and Technical Information (OSTI.GOV)

J. D. Mason

2001-06-18

The Department of Energy (DOE) and associated agencies have moved rapidly toward electronic production, management, and dissemination of scientific and technical information. The World-Wide Web (WWW) has become a primary means of information dissemination. Electronic commerce (EC) is becoming the preferred means of procurement. DOE, like other government agencies, depends on and encourages the use of international standards in data communications. Like most government agencies, DOE has expressed a preference for openly developed standards over proprietary designs promoted as ''standards'' by vendors. In particular, there is a preference for standards developed by organizations such as the International Organization for Standardizationmore » (ISO) and the American National Standards Institute (ANSI) that use open, public processes to develop their standards. Among the most widely adopted international standards is the Standard Generalized Markup Language (SGML, ISO 8879:1986, FIPS 152), to which DOE long ago made a commitment. Besides the official commitment, which has resulted in several specialized projects, DOE makes heavy use of coding derived from SGML: Most documents on the WWW are coded in HTML (Hypertext Markup Language), which is an application of SGML. The World-Wide Web Consortium (W3C), with the backing of major software houses like Adobe, IBM, Microsoft, Netscape, Oracle, and Sun, is promoting XML (eXtensible Markup Language), a class of SGML applications, for the future of the WWW and the basis for EC. In support of DOE's use of these standards, I have served since 1985 as Chairman of the international committee responsible for SGML and related standards, ISO/IEC JTC1/SC34 (SC34) and its predecessor organizations. During my May 2001 trip, I chaired the spring 2001 meeting of SC34 in Berlin, Germany. I also attended XML Europe 2001, a major conference on the use of SGML and XML sponsored by the Graphic Communications Association (GCA), and chaired a meeting of the International SGML/XML Users' Group (ISUG). In addition to the widespread use of the WWW among DOE's plants and facilities in Oak Ridge and among DOE sites across the nation, there have been several past and present SGML- and XML-based projects at the Y-12 National Security Complex (Y-12). Our local project team has done SGML and XML development at Y-12 and Oak Ridge National Laboratory (ORNL) since the late 1980s. SGML is a component of the Weapons Records Archiving and Preservation (WRAP) project at Y-12 and is the format for catalog metadata chosen for weapons records by the Nuclear Weapons Information Group (NWIG). The ''Ferret'' system for automated classification analysis uses XML to structure its knowledge base. The Ferret team also provides XML consulting to OSTI and DOE Headquarters, particularly the National Nuclear Security Administration (NNSA). Supporting standards development allows DOE and Y-12 the opportunity both to provide input into the process and to benefit from contact with some of the leading experts in the subject matter. Oak Ridge has been for some years the location to which other DOE sites turn for expertise in SGML, XML, and related topics.« less

77 FR 12641 - Shipping Coordinating Committee; Notice of Committee Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-01

... including World Customs Organization and International Organization for Standardization standards. 2. Based... capacity of the room. To facilitate the building security process, and to request reasonable accommodation...

web-based interactive data processing: application to stable isotope metrology.

PubMed

Verkouteren, R M; Lee, J N

2001-08-01

To address a fundamental need in stable isotope metrology, the National Institute of Standards and Technology (NIST) has established a web-based interactive data-processing system accessible through a common gateway interface (CGI) program on the internet site http://www. nist.gov/widps-co2. This is the first application of a web-based tool that improves the measurement traceability afforded by a series of NIST standard materials. Specifically, this tool promotes the proper usage of isotope reference materials (RMs) and improves the quality of reported data from extensive measurement networks. Through the International Atomic Energy Agency (IAEA), we have defined standard procedures for stable isotope measurement and data-processing, and have determined and applied consistent reference values for selected NIST and IAEA isotope RMs. Measurement data of samples and RMs are entered into specified fields on the web-based form. These data are submitted through the CGI program on a NIST Web server, where appropriate calculations are performed and results returned to the client. Several international laboratories have independently verified the accuracy of the procedures and algorithm for measurements of naturally occurring carbon-13 and oxygen-18 abundances and slightly enriched compositions up to approximately 150% relative to natural abundances. To conserve the use of the NIST RMs, users may determine value assignments for a secondary standard to be used in routine analysis. Users may also wish to validate proprietary algorithms embedded in their laboratory instrumentation, or specify the values of fundamental variables that are usually fixed in reduction algorithms to see the effect on the calculations. The results returned from the web-based tool are limited in quality only by the measurements themselves, and further value may be realized through the normalization function. When combined with stringent measurement protocols, two- to threefold improvements have been realized in the reproducibility of carbon-13 and oxygen-18 determinations across laboratories.

Acute retinal toxicity associated with a mixture of perfluorooctane and perfluorohexyloctane: failure of another indirect cytotoxicity analysis.

PubMed

Coco, Rosa M; Srivastava, Girish K; Andrés-Iglesias, Cristina; Medina, Jesús; Rull, Fernando; Fernandez-Vega-Gonzalez, Alvaro; Fernandez-Bueno, Ivan; Dueñas, Antonio; Pastor, Jose C

2018-03-29

To report new information related to acute retinal toxicity of Bio Octane Plus, a mixture of 90% perfluorooctane (PFO) and 10% perfluorohexyloctane. This retrospective, descriptive case series reports the occurrence of acute retinal toxicity after vitreoretinal surgery in which Bio Octane Plus (batch number 1605148) was used as an endotamponade. Cytotoxicity biocompatibility tests and chemical analyses by Fourier-transformed infrared (FTIR) spectroscopy and gas chromatography-mass spectrometry (GC-MS) of the presumed toxic product were performed. Four patients presented with acute severe visual loss after uneventful ocular surgery assisted by Bio Octane Plus (batch number 1605148) as endotamponade. Patients experienced extensive retinal vascular occlusion leading to retinal and optic nerve atrophy. The viability of ARPE-19 cells directly exposed to the suspect batch for 30 min was 0%. The agarose overlay method used by the manufacturer according to European Union regulations and International Organization for Standardization (ISO) International Standards failed to detect toxicity. FTIR spectroscopy showed small differences between the non-toxic and toxic batches. GC-MS analysis showed the presence of bromotributyl stannane (whose toxicity was demonstrated in the dose-response curve) only in the toxic batch of Bio Octane Plus. This is the third report of retinotoxicity due to PFO in 4 years. The clinical profiles may be missed as they resemble other postsurgical complications; therefore, more cases worldwide could have gone unreported. Protocols to determine cytotoxicity of intraocular medical devices and approved by the ISO International Standards based on indirect methods have failed and should be revised to ensure safety. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Recommendations for the standardization of bone marrow disease assessment and reporting in children with neuroblastoma on behalf of the International Neuroblastoma Response Criteria Bone Marrow Working Group.

PubMed

Burchill, Susan A; Beiske, Klaus; Shimada, Hiroyuki; Ambros, Peter F; Seeger, Robert; Tytgat, Godelieve A M; Brock, Penelope R; Haber, Michelle; Park, Julie R; Berthold, Frank

2017-04-01

The current study was conducted to expedite international standardized reporting of bone marrow disease in children with neuroblastoma and to improve equivalence of care. A multidisciplinary International Neuroblastoma Response Criteria Bone Marrow Working Group was convened by the US National Cancer Institute in January 2012 with representation from Europe, North America, and Australia. Practical transferable recommendations to standardize the reporting of bone marrow disease were developed. To the authors' knowledge, the current study is the first to comprehensively present consensus criteria for the collection, analysis, and reporting of the percentage area of bone marrow parenchyma occupied by tumor cells in trephine-biopsies. The quantitative analysis of neuroblastoma content in bone marrow aspirates by immunocytology and reverse transcriptase-quantitative polymerase chain reaction are revised. The inclusion of paired-like homeobox 2b (PHOX2B) for immunohistochemistry and reverse transcriptase-quantitative polymerase chain reaction is recommended. Recommendations for recording bone marrow response are provided. The authors endorse the quantitative assessment of neuroblastoma cell content in bilateral core needle biopsies-trephines and aspirates in all children with neuroblastoma, with the exception of infants, in whom the evaluation of aspirates alone is advised. It is interesting to note that 5% disease is accepted as an internationally achievable level for disease assessment. The quantitative assessment of neuroblastoma cells is recommended to provide data from which evidence-based numerical criteria for the reporting of bone marrow response can be realized. This is particularly important in the minimal disease setting and when neuroblastoma detection in bone marrow is intermittent, where clinical impact has yet to be validated. The wide adoption of these harmonized criteria will enhance the ability to compare outcomes from different trials and facilitate collaborative trial design. Cancer 2017;123:1095-1105. © 2016 American Cancer Society. © 2016 American Cancer Society.

Benefit-Risk Analysis for Decision-Making: An Approach.

PubMed

Raju, G K; Gurumurthi, K; Domike, R

2016-12-01

The analysis of benefit and risk is an important aspect of decision-making throughout the drug lifecycle. In this work, the use of a benefit-risk analysis approach to support decision-making was explored. The proposed approach builds on the qualitative US Food and Drug Administration (FDA) approach to include a more explicit analysis based on international standards and guidance that enables aggregation and comparison of benefit and risk on a common basis and a lifecycle focus. The approach is demonstrated on six decisions over the lifecycle (e.g., accelerated approval, withdrawal, and traditional approval) using two case studies: natalizumab for multiple sclerosis (MS) and bedaquiline for multidrug-resistant tuberculosis (MDR-TB). © 2016 American Society for Clinical Pharmacology and Therapeutics.

Comparison of matrix effects in HPLC-MS/MS and UPLC-MS/MS analysis of nine basic pharmaceuticals in surface waters.

PubMed

Van De Steene, Jet C; Lambert, Willy E

2008-05-01

When developing an LC-MS/MS-method matrix effects are a major issue. The effect of co-eluting compounds arising from the matrix can result in signal enhancement or suppression. During method development much attention should be paid to diminishing matrix effects as much as possible. The present work evaluates matrix effects from aqueous environmental samples in the simultaneous analysis of a group of 9 specific pharmaceuticals with HPLC-ESI/MS/MS and UPLC-ESI/MS/MS: flubendazole, propiconazole, pipamperone, cinnarizine, ketoconazole, miconazole, rabeprazole, itraconazole and domperidone. When HPLC-MS/MS is used, matrix effects are substantial and can not be compensated for with analogue internal standards. For different surface water samples different matrix effects are found. For accurate quantification the standard addition approach is necessary. Due to the better resolution and more narrow peaks in UPLC, analytes will co-elute less with interferences during ionisation, so matrix effects could be lower, or even eliminated. If matrix effects are eliminated with this technique, the standard addition method for quantification can be omitted and the overall method will be simplified. Results show that matrix effects are almost eliminated if internal standards (structural analogues) are used. Instead of the time-consuming and labour-intensive standard addition method, with UPLC the internal standardization can be used for quantification and the overall method is substantially simplified.

Evolution of chemical-specific adjustment factors (CSAF) based on recent international experience; increasing utility and facilitating regulatory acceptance.

PubMed

Bhat, Virunya S; Meek, M E Bette; Valcke, Mathieu; English, Caroline; Boobis, Alan; Brown, Richard

2017-10-01

The application of chemical-specific toxicokinetic or toxicodynamic data to address interspecies differences and human variability in the quantification of hazard has potential to reduce uncertainty and better characterize variability compared with the use of traditional default or categorically-based uncertainty factors. The present review summarizes the state-of-the-science since the introduction of the World Health Organization/International Programme on Chemical Safety (WHO/IPCS) guidance on chemical-specific adjustment factors (CSAF) in 2005 and the availability of recent applicable guidance including the WHO/IPCS guidance on physiologically-based pharmacokinetic (PBPK) modeling in 2010 as well as the U.S. EPA guidance on data-derived extrapolation factors in 2014. A summary of lessons learned from an analysis of more than 100 case studies from global regulators or published literature illustrates the utility and evolution of CSAF in regulatory decisions. Challenges in CSAF development related to the adequacy of, or confidence in, the supporting data, including verification or validation of PBPK models. The analysis also identified issues related to adequacy of CSAF documentation, such as inconsistent terminology and often limited and/or inconsistent reporting, of both supporting data and/or risk assessment context. Based on this analysis, recommendations for standardized terminology, documentation and relevant interdisciplinary research and engagement are included to facilitate the continuing evolution of CSAF development and guidance.

Competency based training in robotic surgery: benchmark scores for virtual reality robotic simulation.

PubMed

Raison, Nicholas; Ahmed, Kamran; Fossati, Nicola; Buffi, Nicolò; Mottrie, Alexandre; Dasgupta, Prokar; Van Der Poel, Henk

2017-05-01

To develop benchmark scores of competency for use within a competency based virtual reality (VR) robotic training curriculum. This longitudinal, observational study analysed results from nine European Association of Urology hands-on-training courses in VR simulation. In all, 223 participants ranging from novice to expert robotic surgeons completed 1565 exercises. Competency was set at 75% of the mean expert score. Benchmark scores for all general performance metrics generated by the simulator were calculated. Assessment exercises were selected by expert consensus and through learning-curve analysis. Three basic skill and two advanced skill exercises were identified. Benchmark scores based on expert performance offered viable targets for novice and intermediate trainees in robotic surgery. Novice participants met the competency standards for most basic skill exercises; however, advanced exercises were significantly more challenging. Intermediate participants performed better across the seven metrics but still did not achieve the benchmark standard in the more difficult exercises. Benchmark scores derived from expert performances offer relevant and challenging scores for trainees to achieve during VR simulation training. Objective feedback allows both participants and trainers to monitor educational progress and ensures that training remains effective. Furthermore, the well-defined goals set through benchmarking offer clear targets for trainees and enable training to move to a more efficient competency based curriculum. © 2016 The Authors BJU International © 2016 BJU International Published by John Wiley & Sons Ltd.

An in-depth evaluation of accuracy and precision in Hg isotopic analysis via pneumatic nebulization and cold vapor generation multi-collector ICP-mass spectrometry.

PubMed

Rua-Ibarz, Ana; Bolea-Fernandez, Eduardo; Vanhaecke, Frank

2016-01-01

Mercury (Hg) isotopic analysis via multi-collector inductively coupled plasma (ICP)-mass spectrometry (MC-ICP-MS) can provide relevant biogeochemical information by revealing sources, pathways, and sinks of this highly toxic metal. In this work, the capabilities and limitations of two different sample introduction systems, based on pneumatic nebulization (PN) and cold vapor generation (CVG), respectively, were evaluated in the context of Hg isotopic analysis via MC-ICP-MS. The effect of (i) instrument settings and acquisition parameters, (ii) concentration of analyte element (Hg), and internal standard (Tl)-used for mass discrimination correction purposes-and (iii) different mass bias correction approaches on the accuracy and precision of Hg isotope ratio results was evaluated. The extent and stability of mass bias were assessed in a long-term study (18 months, n = 250), demonstrating a precision ≤0.006% relative standard deviation (RSD). CVG-MC-ICP-MS showed an approximately 20-fold enhancement in Hg signal intensity compared with PN-MC-ICP-MS. For CVG-MC-ICP-MS, the mass bias induced by instrumental mass discrimination was accurately corrected for by using either external correction in a sample-standard bracketing approach (SSB) or double correction, consisting of the use of Tl as internal standard in a revised version of the Russell law (Baxter approach), followed by SSB. Concomitant matrix elements did not affect CVG-ICP-MS results. Neither with PN, nor with CVG, any evidence for mass-independent discrimination effects in the instrument was observed within the experimental precision obtained. CVG-MC-ICP-MS was finally used for Hg isotopic analysis of reference materials (RMs) of relevant environmental origin. The isotopic composition of Hg in RMs of marine biological origin testified of mass-independent fractionation that affected the odd-numbered Hg isotopes. While older RMs were used for validation purposes, novel Hg isotopic data are provided for the latest generations of some biological RMs.

[Modularization by the open standard. (II)].

PubMed

Muto, M; Takaha, Y; Chiba, N

2000-10-01

In recent years, accompanied by the marvelous development and spread of Laboratory Automation System(LAS), the NCCLS is now proposing five international standards for laboratory automation. We have based our laboratory on these "NCCLS standards of laboratory automation", we take these standards ahead first, and we now propose an open standard called "Open LA 21", to establish more detailed standard replacing the NCCLS laboratory automation standards.

Certified Reference Material for Use in 1H, 31P, and 19F Quantitative NMR, Ensuring Traceability to the International System of Units.

PubMed

Rigger, Romana; Rück, Alexander; Hellriegel, Christine; Sauermoser, Robert; Morf, Fabienne; Breitruck, KathrinBreitruck; Obkircher, Markus

2017-09-01

In recent years, quantitative NMR (qNMR) spectroscopy has become one of the most important tools for content determination of organic substances and quantitative evaluation of impurities. Using Certified Reference Materials (CRMs) as internal or external standards, the extensively used qNMR method can be applied for purity determination, including unbroken traceability to the International System of Units (SI). The implementation of qNMR toward new application fields, e.g., metabolomics, environmental analysis, and physiological pathway studies, brings along more complex molecules and systems, thus making use of 1H qNMR challenging. A smart workaround is possible by the use of other NMR active nuclei, namely 31P and 19F. This article presents the development of three classes of qNMR CRMs based on different NMR active nuclei (1H, 31P, and 19F), and the corresponding approaches to establish traceability to the SI through primary CRMs from the National Institute of Standards and Technology and the National Metrology Institute of Japan. These TraceCERT® qNMR CRMs are produced under ISO/IEC 17025 and ISO Guide 34 using high-performance qNMR.

Consensus on Recording Deep Endometriosis Surgery: the CORDES statement.

PubMed

Vanhie, A; Meuleman, C; Tomassetti, C; Timmerman, D; D'Hoore, A; Wolthuis, A; Van Cleynenbreugel, B; Dancet, E; Van den Broeck, U; Tsaltas, J; Renner, S P; Ebert, A D; Carmona, F; Abbott, J; Stepniewska, A; Taylor, H; Saridogan, E; Mueller, M; Keckstein, J; Pluchino, N; Janik, G; Zupi, E; Minelli, L; Cooper, M; Dunselman, G; Koh, C; Abrao, M S; Chapron, C; D'Hooghe, T

2016-06-01

Which essential items should be recorded before, during and after endometriosis surgery and in clinical outcome based surgical trials in patients with deep endometriosis (DE)? A DE surgical sheet (DESS) was developed for standardized reporting of the surgical treatment of DE and an international expert consensus proposal on relevant items that should be recorded in surgical outcome trials in women with DE. Surgery is an important treatment for symptomatic DE. So far, data have been reported in such a way that comparison of different surgical techniques is impossible. Therefore, we present an international expert proposal for standardized reporting of surgical treatment and surgical outcome trials in women with DE. International expert consensus based on a systematic review of literature. Taking into account recommendations from Consolidated Standards of Reporting Trials (CONSORT), the Innovation Development Exploration Assessment and Long-term Study (IDEAL), the Initiative on Methods, Measurement and Pain Assessment in Clinical trials (IMMPACT) and the World Endometriosis Research Foundation Phenome and Biobanking Harmonisation Project (WERF EPHect), a systematic literature review on surgical treatment of DE was performed and resulted in a proposal for standardized reporting, adapted by contributions from eight members of the multidisciplinary Leuven University Hospitals Endometriosis Care Program, from 18 international experts and from audience feedback during three international meetings. We have developed the DESS to record in detail the surgical procedures for DE, and an international consensus on pre-, intra- and post-operative data that should be recorded in surgical outcome trials on DE. The recommendations in this paper represent a consensus among international experts based on a systematic review of the literature. For several items and recommendations, high-quality RCTs were not available. Further research is needed to validate and evaluate the recommendations presented here. This international expert consensus for standardized reporting of surgical treatment in women with DE, based on a systematic literature review and international consensus, can be used as a guideline to record and report surgical management of patients with DE and as a guideline to design, execute, interpret and compare clinical trials in this patient population. None of the authors received funding for the development of this paper. M.A. reports personal fees and non-financial support from Bayer Pharma outside the submitted work; H.T. reports a grant from Pfizer and personal fees for being on the advisory board of Perrigo, Abbvie, Allergan and SPD. N/A. © The Author 2016. Published by Oxford University Press on behalf of the European Society of Human Reproduction and Embryology. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Quantitative determination and validation of octreotide acetate using 1 H-NMR spectroscopy with internal standard method.

PubMed

Yu, Chen; Zhang, Qian; Xu, Peng-Yao; Bai, Yin; Shen, Wen-Bin; Di, Bin; Su, Meng-Xiang

2018-01-01

Quantitative nuclear magnetic resonance (qNMR) is a well-established technique in quantitative analysis. We presented a validated 1 H-qNMR method for assay of octreotide acetate, a kind of cyclic octopeptide. Deuterium oxide was used to remove the undesired exchangeable peaks, which was referred to as proton exchange, in order to make the quantitative signals isolated in the crowded spectrum of the peptide and ensure precise quantitative analysis. Gemcitabine hydrochloride was chosen as the suitable internal standard. Experimental conditions, including relaxation delay time, the numbers of scans, and pulse angle, were optimized first. Then method validation was carried out in terms of selectivity, stability, linearity, precision, and robustness. The assay result was compared with that by means of high performance liquid chromatography, which is provided by Chinese Pharmacopoeia. The statistical F test, Student's t test, and nonparametric test at 95% confidence level indicate that there was no significant difference between these two methods. qNMR is a simple and accurate quantitative tool with no need for specific corresponding reference standards. It has the potential of the quantitative analysis of other peptide drugs and standardization of the corresponding reference standards. Copyright © 2017 John Wiley & Sons, Ltd.

Solar Cell Calibration and Measurement Techniques

NASA Technical Reports Server (NTRS)

Bailey, Sheila; Brinker, Dave; Curtis, Henry; Jenkins, Phillip; Scheiman, Dave

1997-01-01

The increasing complexity of space solar cells and the increasing international markets for both cells and arrays has resulted in workshops jointly sponsored by NASDA, ESA and NASA. These workshops are designed to obtain international agreement on standardized values for the AMO spectrum and constant, recommend laboratory measurement practices and establish a set of protocols for international comparison of laboratory measurements. A working draft of an ISO standard, WDI 5387, 'Requirements for Measurement and Calibration Procedures for Space Solar Cells' was discussed with a focus on the scope of the document, a definition of primary standard cell, and required error analysis for all measurement techniques. Working groups addressed the issues of Air Mass Zero (AMO) solar constant and spectrum, laboratory measurement techniques, and the international round robin methodology. A summary is presented of the current state of each area and the formulation of the ISO document.

Solar Cell Calibration and Measurement Techniques

NASA Technical Reports Server (NTRS)

Bailey, Sheila; Brinker, Dave; Curtis, Henry; Jenkins, Phillip; Scheiman, Dave

2004-01-01

The increasing complexity of space solar cells and the increasing international markets for both cells and arrays has resulted in workshops jointly sponsored by NASDA, ESA and NASA. These workshops are designed to obtain international agreement on standardized values for the AMO spectrum and constant, recommend laboratory measurement practices and establish a set of protocols for international comparison of laboratory measurements. A working draft of an ISO standard, WD15387, "Requirements for Measurement and Calibration Procedures for Space Solar Cells" was discussed with a focus on the scope of the document, a definition of primary standard cell, and required error analysis for all measurement techniques. Working groups addressed the issues of Air Mass Zero (AMO) solar constant and spectrum, laboratory measurement techniques, and te international round robin methodology. A summary is presented of the current state of each area and the formulation of the ISO document.

A review of consensus test methods for established medical imaging modalities and their implications for optical coherence tomography

NASA Astrophysics Data System (ADS)

Pfefer, Joshua; Agrawal, Anant

2012-03-01

In recent years there has been increasing interest in development of consensus, tissue-phantom-based approaches for assessment of biophotonic imaging systems, with the primary goal of facilitating clinical translation of novel optical technologies. Well-characterized test methods based on tissue phantoms can provide useful tools for performance assessment, thus enabling standardization and device inter-comparison during preclinical development as well as quality assurance and re-calibration in the clinical setting. In this review, we study the role of phantom-based test methods as described in consensus documents such as international standards for established imaging modalities including X-ray CT, MRI and ultrasound. Specifically, we focus on three image quality characteristics - spatial resolution, spatial measurement accuracy and image uniformity - and summarize the terminology, metrics, phantom design/construction approaches and measurement/analysis procedures used to assess these characteristics. Phantom approaches described are those in routine clinical use and tend to have simplified morphology and biologically-relevant physical parameters. Finally, we discuss the potential for applying knowledge gained from existing consensus documents in the development of standardized, phantom-based test methods for optical coherence tomography.

DICOM for quantitative imaging biomarker development: a standards based approach to sharing clinical data and structured PET/CT analysis results in head and neck cancer research

PubMed Central

Clunie, David; Ulrich, Ethan; Bauer, Christian; Wahle, Andreas; Brown, Bartley; Onken, Michael; Riesmeier, Jörg; Pieper, Steve; Kikinis, Ron; Buatti, John; Beichel, Reinhard R.

2016-01-01

Background. Imaging biomarkers hold tremendous promise for precision medicine clinical applications. Development of such biomarkers relies heavily on image post-processing tools for automated image quantitation. Their deployment in the context of clinical research necessitates interoperability with the clinical systems. Comparison with the established outcomes and evaluation tasks motivate integration of the clinical and imaging data, and the use of standardized approaches to support annotation and sharing of the analysis results and semantics. We developed the methodology and tools to support these tasks in Positron Emission Tomography and Computed Tomography (PET/CT) quantitative imaging (QI) biomarker development applied to head and neck cancer (HNC) treatment response assessment, using the Digital Imaging and Communications in Medicine (DICOM®) international standard and free open-source software. Methods. Quantitative analysis of PET/CT imaging data collected on patients undergoing treatment for HNC was conducted. Processing steps included Standardized Uptake Value (SUV) normalization of the images, segmentation of the tumor using manual and semi-automatic approaches, automatic segmentation of the reference regions, and extraction of the volumetric segmentation-based measurements. Suitable components of the DICOM standard were identified to model the various types of data produced by the analysis. A developer toolkit of conversion routines and an Application Programming Interface (API) were contributed and applied to create a standards-based representation of the data. Results. DICOM Real World Value Mapping, Segmentation and Structured Reporting objects were utilized for standards-compliant representation of the PET/CT QI analysis results and relevant clinical data. A number of correction proposals to the standard were developed. The open-source DICOM toolkit (DCMTK) was improved to simplify the task of DICOM encoding by introducing new API abstractions. Conversion and visualization tools utilizing this toolkit were developed. The encoded objects were validated for consistency and interoperability. The resulting dataset was deposited in the QIN-HEADNECK collection of The Cancer Imaging Archive (TCIA). Supporting tools for data analysis and DICOM conversion were made available as free open-source software. Discussion. We presented a detailed investigation of the development and application of the DICOM model, as well as the supporting open-source tools and toolkits, to accommodate representation of the research data in QI biomarker development. We demonstrated that the DICOM standard can be used to represent the types of data relevant in HNC QI biomarker development, and encode their complex relationships. The resulting annotated objects are amenable to data mining applications, and are interoperable with a variety of systems that support the DICOM standard. PMID:27257542

International standards for monoclonal antibodies to support pre- and post-marketing product consistency: Evaluation of a candidate international standard for the bioactivities of rituximab.

PubMed

Prior, Sandra; Hufton, Simon E; Fox, Bernard; Dougall, Thomas; Rigsby, Peter; Bristow, Adrian

2018-01-01

The intrinsic complexity and heterogeneity of therapeutic monoclonal antibodies is built into the biosimilarity paradigm where critical quality attributes are controlled in exhaustive comparability studies with the reference medicinal product. The long-term success of biosimilars will depend on reassuring healthcare professionals and patients of consistent product quality, safety and efficacy. With this aim, the World Health Organization has endorsed the need for public bioactivity standards for therapeutic monoclonal antibodies in support of current controls. We have developed a candidate international potency standard for rituximab that was evaluated in a multi-center collaborative study using participants' own qualified Fc-effector function and cell-based binding bioassays. Dose-response curve model parameters were shown to reflect similar behavior amongst rituximab preparations, albeit with some differences in potency. In the absence of a common reference standard, potency estimates were in poor agreement amongst laboratories, but the use of the candidate preparation significantly reduced this variability. Our results suggest that the candidate rituximab standard can support bioassay performance and improve data harmonization, which when implemented will promote consistency of rituximab products over their life-cycles. This data provides the first scientific evidence that a classical standardization exercise allowing traceability of bioassay data to an international standard is also applicable to rituximab. However, we submit that this new type of international standard needs to be used appropriately and its role not to be mistaken with that of the reference medicinal product.

Sulfur-based absolute quantification of proteins using isotope dilution inductively coupled plasma mass spectrometry

NASA Astrophysics Data System (ADS)

Lee, Hyun-Seok; Heun Kim, Sook; Jeong, Ji-Seon; Lee, Yong-Moon; Yim, Yong-Hyeon

2015-10-01

An element-based reductive approach provides an effective means of realizing International System of Units (SI) traceability for high-purity biological standards. Here, we develop an absolute protein quantification method using double isotope dilution (ID) inductively coupled plasma mass spectrometry (ICP-MS) combined with microwave-assisted acid digestion for the first time. We validated the method and applied it to certify the candidate protein certified reference material (CRM) of human growth hormone (hGH). The concentration of hGH was determined by analysing the total amount of sulfur in hGH. Next, the size-exclusion chromatography method was used with ICP-MS to characterize and quantify sulfur-containing impurities. By subtracting the contribution of sulfur-containing impurities from the total sulfur content in the hGH CRM, we obtained a SI-traceable certification value. The quantification result obtained with the present method based on sulfur analysis was in excellent agreement with the result determined via a well-established protein quantification method based on amino acid analysis using conventional acid hydrolysis combined with an ID liquid chromatography-tandem mass spectrometry. The element-based protein quantification method developed here can be generally used for SI-traceable absolute quantification of proteins, especially pure-protein standards.

Application of quantitative 1H NMR for the calibration of protoberberine alkaloid reference standards.

PubMed

Wu, Yan; He, Yi; He, Wenyi; Zhang, Yumei; Lu, Jing; Dai, Zhong; Ma, Shuangcheng; Lin, Ruichao

2014-03-01

Quantitative nuclear magnetic resonance spectroscopy (qNMR) has been developed into an important tool in the drug analysis, biomacromolecule detection, and metabolism study. Compared with mass balance method, qNMR method bears some advantages in the calibration of reference standard (RS): it determines the absolute amount of a sample; other chemical compound and its certified reference material (CRM) can be used as internal standard (IS) to obtain the purity of the sample. Protoberberine alkaloids have many biological activities and have been used as reference standards for the control of many herbal drugs. In present study, the qNMR methods were developed for the calibration of berberine hydrochloride, palmatine hydrochloride, tetrahydropalmatine, and phellodendrine hydrochloride with potassium hydrogen phthalate as IS. Method validation was carried out according to the guidelines for the method validation of Chinese Pharmacopoeia. The results of qNMR were compared with those of mass balance method and the differences between the results of two methods were acceptable based on the analysis of estimated measurement uncertainties. Therefore, qNMR is an effective and reliable analysis method for the calibration of RS and can be used as a good complementarity to the mass balance method. Copyright © 2013 Elsevier B.V. All rights reserved.

Regulations on consume and commercialization of food irradiation in Mexico

NASA Astrophysics Data System (ADS)

Bustos Ramírez, Ma. Emilia; Jiménez Pérez, Jesús

1995-02-01

A Mexican standard for food irradiation is ready for final publication after the authority received and reviewed public comments of the project published in April 1994. The standard establish the radiation doses for different classes of food, based on ICGFI recommendations. Also included are controls for sampling, packaging, labelling, transportation, process inspection and accordance with international regulations. The results of the economical analysis of cost-benefit of the application of the standard show that the net present value is positive. The method of calculation is presented explaining the assumptions considered for the estimation of the total annual savings and surveillance costs. A final version of the research program report on radiation quarantine treatment of Mexican mangoes will be used for the petition to APHIS for the amendment of quarantine procedures to permit importation into the USA of irradiated products.

The effect of coating patterns with spinel-based investment on the castability and porosity of titanium cast into three phosphate-bonded investments.

PubMed

Pieralini, Anelise R F; Benjamin, Camila M; Ribeiro, Ricardo Faria; Scaf, Gulnara; Adabo, Gelson Luis

2010-10-01

This study evaluated the effect of pattern coating with spinel-based investment Rematitan Ultra (RU) on the castability and internal porosity of commercially pure (CP) titanium invested into phosphate-bonded investments. The apparent porosity of the investment was also measured. Square patterns (15 × 15 × 0.3 mm(3)) were either coated with RU, or not and invested into the phosphate-bonded investments: Rematitan Plus (RP), Rema Exakt (RE), Castorit Super C (CA), and RU (control group). The castings were made in an Ar-arc vacuum-pressure machine. The castability area (mm(2) ) was measured by an image-analysis system (n = 10). For internal porosity, the casting (12 × 12 × 2 mm(3) ) was studied by the X-ray method, and the projected porous area percentage was measured by an image-analysis system (n = 10). The apparent porosity of the investment (n = 10) was measured in accordance with the ASTM C373-88 standard. Analysis of variance (One-way ANOVA) of castability was significant, and the Tukey test indicated that RU had the highest mean but the investing technique with coating increased the castability for all phosphate-bonded investments. The analysis of the internal porosity of the cast by the nonparametric test demonstrated that the RP, RE, and CA with coating and RP without coating did not differ from the control group (RU), while the CA and RE casts without coating were more porous. The one-way ANOVA of apparent porosity of the investment was significant, and the Tukey test showed that the means of RU (36.10%) and CA (37.22%) were higher than those of RP (25.91%) and RE (26.02%). Pattern coating with spinel-based material prior to phosphate-bonded investments can influence the castability and the internal porosity of CP Ti. © 2010 by The American College of Prosthodontists.

A mixed-methods research approach to the review of competency standards for orthotist/prosthetists in Australia.

PubMed

Ash, Susan; O'Connor, Jackie; Anderson, Sarah; Ridgewell, Emily; Clarke, Leigh

2015-06-01

The requirement for an allied health workforce is expanding as the global burden of disease increases internationally. To safely meet the demand for an expanded workforce of orthotist/prosthetists in Australia, competency based standards, which are up-to-date and evidence-based, are required. The aims of this study were to determine the minimum level for entry into the orthotic/prosthetic profession; to develop entry level competency standards for the profession; and to validate the developed entry-level competency standards within the profession nationally, using an evidence-based approach. A mixed-methods research design was applied, using a three-step sequential exploratory design, where step 1 involved collecting and analyzing qualitative data from two focus groups; step 2 involved exploratory instrument development and testing, developing the draft competency standards; and step 3 involved quantitative data collection and analysis - a Delphi survey. In stage 1 (steps 1 and 2), the two focus groups - an expert and a recent graduate group of Australian orthotist/prosthetists - were led by an experienced facilitator, to identify gaps in the current competency standards and then to outline a key purpose, and work roles and tasks for the profession. The resulting domains and activities of the first draft of the competency standards were synthesized using thematic analysis. In stage 2 (step 3), the draft-competency standards were circulated to a purposive sample of the membership of the Australian Orthotic Prosthetic Association, using three rounds of Delphi survey. A project reference group of orthotist/prosthetists reviewed the results of both stages. In stage 1, the expert (n = 10) and the new graduate (n = 8) groups separately identified work roles and tasks, which formed the initial draft of the competency standards. Further drafts were refined and performance criteria added by the project reference group, resulting in the final draft-competency standards. In stage 2, the final draft-competency standards were circulated to 56 members (n = 44 final round) of the Association, who agreed on the key purpose, 6 domains, 18 activities, and 68 performance criteria of the final competency standards. This study outlines a rigorous and evidence-based mixed-methods approach for developing and endorsing professional competency standards, which is representative of the views of the profession of orthotist/prosthetists.

An internal reference model-based PRF temperature mapping method with Cramer-Rao lower bound noise performance analysis.

PubMed

Li, Cheng; Pan, Xinyi; Ying, Kui; Zhang, Qiang; An, Jing; Weng, Dehe; Qin, Wen; Li, Kuncheng

2009-11-01

The conventional phase difference method for MR thermometry suffers from disturbances caused by the presence of lipid protons, motion-induced error, and field drift. A signal model is presented with multi-echo gradient echo (GRE) sequence using a fat signal as an internal reference to overcome these problems. The internal reference signal model is fit to the water and fat signals by the extended Prony algorithm and the Levenberg-Marquardt algorithm to estimate the chemical shifts between water and fat which contain temperature information. A noise analysis of the signal model was conducted using the Cramer-Rao lower bound to evaluate the noise performance of various algorithms, the effects of imaging parameters, and the influence of the water:fat signal ratio in a sample on the temperature estimate. Comparison of the calculated temperature map and thermocouple temperature measurements shows that the maximum temperature estimation error is 0.614 degrees C, with a standard deviation of 0.06 degrees C, confirming the feasibility of this model-based temperature mapping method. The influence of sample water:fat signal ratio on the accuracy of the temperature estimate is evaluated in a water-fat mixed phantom experiment with an optimal ratio of approximately 0.66:1. (c) 2009 Wiley-Liss, Inc.

Standards-Based External Exams and Students' Science-Related Career Expectations: An International Perspective

ERIC Educational Resources Information Center

Han, Seong Won

2016-01-01

Students' science-related career expectations are important for predicting their future science, technology, engineering, and mathematics (STEM)-related educational and occupational attainments. This study examines the degree to which standards-based external examinations are associated with a student's propensity for pursuing science-related…

Why CATTS Needs SPACE! Standards-Based Technology Curricula for Standards-Based Technology Programs

ERIC Educational Resources Information Center

Burke, Barry N.

2005-01-01

A recent discussion on ITEA's (International Technology Education Association's) IdeaGarden centered on the need for a "national curriculum." The idea of a national curriculum is one of great debate. Advancing Excellence in Technological Literacy (AETL) identifies criteria for student assessment, professional development, and programs that…

Wireless Communications in Space

NASA Technical Reports Server (NTRS)

2004-01-01

In 1992, NASA and the U.S. Department of Defense jointly commissioned the research and development of a technology solution to address the challenges and requirements of communicating with their spacecraft. The project yielded an international consortium composed of representatives from the space science community, industry, and academia. This group of experts developed a broad suite of protocols specifically designed for space-based communications, known today as Space Communications Protocol Standards (SCPS). Having been internationally standardized by the Consultative Committee on Space Data Systems and the International Standards Organization, SCPS is distributed as open source technology by NASA s Jet Propulsion Laboratory (JPL). The protocols are used for every national space mission that takes place today.

OSI in the NASA science internet: An analysis

NASA Technical Reports Server (NTRS)

Nitzan, Rebecca

1990-01-01

The Open Systems Interconnection (OSI) protocol suite is a result of a world-wide effort to develop international standards for networking. OSI is formalized through the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). The goal of OSI is to provide interoperability between network products without relying on one particular vendor, and to do so on a multinational basis. The National Institute for Standards and Technology (NIST) has developed a Government OSI Profile (GOSIP) that specified a subset of the OSI protocols as a Federal Information Processing Standard (FIPS 146). GOSIP compatibility has been adopted as the direction for all U.S. government networks. OSI is extremely diverse, and therefore adherence to a profile will facilitate interoperability within OSI networks. All major computer vendors have indicated current or future support of GOSIP-compliant OSI protocols in their products. The NASA Science Internet (NSI) is an operational network, serving user requirements under NASA's Office of Space Science and Applications. NSI consists of the Space Physics Analysis Network (SPAN) that uses the DECnet protocols and the NASA Science Network (NSN) that uses TCP/IP protocols. The NSI Project Office is currently working on an OSI integration analysis and strategy. A long-term goal is to integrate SPAN and NSN into one unified network service, using a full OSI protocol suite, which will support the OSSA user community.

Methodology of Clinical Trials Aimed at Assessing Interventions for Cutaneous Leishmaniasis

PubMed Central

Olliaro, Piero; Vaillant, Michel; Arana, Byron; Grogl, Max; Modabber, Farrokh; Magill, Alan; Lapujade, Olivier; Buffet, Pierre; Alvar, Jorge

2013-01-01

The current evidence-base for recommendations on the treatment of cutaneous leishmaniasis (CL) is generally weak. Systematic reviews have pointed to a general lack of standardization of methods for the conduct and analysis of clinical trials of CL, compounded with poor overall quality of several trials. For CL, there is a specific need for methodologies which can be applied generally, while allowing the flexibility needed to cover the diverse forms of the disease. This paper intends to provide clinical investigators with guidance for the design, conduct, analysis and report of clinical trials of treatments for CL, including the definition of measurable, reproducible and clinically-meaningful outcomes. Having unified criteria will help strengthen evidence, optimize investments, and enhance the capacity for high-quality trials. The limited resources available for CL have to be concentrated in clinical studies of excellence that meet international quality standards. PMID:23556016

Raman spectroscopy for DNA quantification in cell nucleus.

PubMed

Okotrub, K A; Surovtsev, N V; Semeshin, V F; Omelyanchuk, L V

2015-01-01

Here we demonstrate the feasibility of a novel approach to quantify DNA in cell nuclei. This approach is based on spectroscopy analysis of Raman light scattering, and avoids the problem of nonstoichiometric binding of dyes to DNA, as it directly measures the signal from DNA. Quantitative analysis of nuclear DNA contribution to Raman spectrum could be reliably performed using intensity of a phosphate mode at 1096 cm(-1) . When compared to the known DNA standards from cells of different animals, our results matched those values at error of 10%. We therefore suggest that this approach will be useful to expand the list of DNA standards, to properly adjust the duration of hydrolysis in Feulgen staining, to assay the applicability of fuchsines for DNA quantification, as well as to measure DNA content in cells with complex hydrolysis patterns, when Feulgen densitometry is inappropriate. © 2014 International Society for Advancement of Cytometry.

Establishment of the first international standard for PEGylated granulocyte colony stimulating factor (PEG-G-CSF): Report of an international collaborative study

PubMed Central

Wadhwa, Meenu; Bird, Chris; Dougall, Thomas; Rigsby, Peter; Bristow, Adrian; Thorpe, Robin

2015-01-01

We assessed the feasibility of developing a suitable international reference standard for determination of in vitro biological activity of human sequence recombinant PEG-G-CSF products with a 20 kD linear PEG linked to the N-terminal methionyl residue of G-CSF (INN Filgrastim), produced using a conjugation process and coupling chemistry similar to that employed for the lead PEGfilgrastim product. Based on initial data which showed that the current WHO 2nd international standard, IS for G-CSF (09/136) or alternatively, a PEG-G-CSF standard with a unitage traceable to the G-CSF IS may potentially serve as the IS for PEG-G-CSF products, two candidate preparations of PEG-G-CSF were formulated and lyophilized at NIBSC. These preparations were tested by 23 laboratories using in vitro bioassays in a multi-centre collaborative study. Results indicated that on the basis of parallelism, the current WHO 2nd IS for G-CSF or any of the PEG-G-CSF samples could be used as the international standard for PEG-G-CSF preparations. However, because of the variability in potency estimates seen when PEG-G-CSF preparations were compared with the current WHO 2nd IS for G-CSF, a candidate PEG-G-CSF was suitable as the WHO IS. The preparation 12/188 was judged suitable to serve as the WHO IS based on in vitro biological activity data. Therefore, the preparation coded 12/188 was established by the WHO Expert Committee on Biological Standardization (ECBS) in 2013 as the WHO 1st IS for human PEGylated G-CSF with an assigned in vitro bioactivity of 10,000 IU per ampoule. PMID:25450254

Per capita invasion probabilities: an empirical model to predict rates of invasion via ballast water

USGS Publications Warehouse

Reusser, Deborah A.; Lee, Henry; Frazier, Melanie; Ruiz, Gregory M.; Fofonoff, Paul W.; Minton, Mark S.; Miller, A. Whitman

2013-01-01

Ballast water discharges are a major source of species introductions into marine and estuarine ecosystems. To mitigate the introduction of new invaders into these ecosystems, many agencies are proposing standards that establish upper concentration limits for organisms in ballast discharge. Ideally, ballast discharge standards will be biologically defensible and adequately protective of the marine environment. We propose a new technique, the per capita invasion probability (PCIP), for managers to quantitatively evaluate the relative risk of different concentration-based ballast water discharge standards. PCIP represents the likelihood that a single discharged organism will become established as a new nonindigenous species. This value is calculated by dividing the total number of ballast water invaders per year by the total number of organisms discharged from ballast. Analysis was done at the coast-wide scale for the Atlantic, Gulf, and Pacific coasts, as well as the Great Lakes, to reduce uncertainty due to secondary invasions between estuaries on a single coast. The PCIP metric is then used to predict the rate of new ballast-associated invasions given various regulatory scenarios. Depending upon the assumptions used in the risk analysis, this approach predicts that approximately one new species will invade every 10–100 years with the International Maritime Organization (IMO) discharge standard of 50 μm per m3 of ballast. This approach resolves many of the limitations associated with other methods of establishing ecologically sound discharge standards, and it allows policy makers to use risk-based methodologies to establish biologically defensible discharge standards.

HEPLIB `91: International users meeting on the support and environments of high energy physics computing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnstad, H.

The purpose of this meeting is to discuss the current and future HEP computing support and environments from the perspective of new horizons in accelerator, physics, and computing technologies. Topics of interest to the Meeting include (but are limited to): the forming of the HEPLIB world user group for High Energy Physic computing; mandate, desirables, coordination, organization, funding; user experience, international collaboration; the roles of national labs, universities, and industry; range of software, Monte Carlo, mathematics, physics, interactive analysis, text processors, editors, graphics, data base systems, code management tools; program libraries, frequency of updates, distribution; distributed and interactive computing, datamore » base systems, user interface, UNIX operating systems, networking, compilers, Xlib, X-Graphics; documentation, updates, availability, distribution; code management in large collaborations, keeping track of program versions; and quality assurance, testing, conventions, standards.« less

HEPLIB 91: International users meeting on the support and environments of high energy physics computing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnstad, H.

The purpose of this meeting is to discuss the current and future HEP computing support and environments from the perspective of new horizons in accelerator, physics, and computing technologies. Topics of interest to the Meeting include (but are limited to): the forming of the HEPLIB world user group for High Energy Physic computing; mandate, desirables, coordination, organization, funding; user experience, international collaboration; the roles of national labs, universities, and industry; range of software, Monte Carlo, mathematics, physics, interactive analysis, text processors, editors, graphics, data base systems, code management tools; program libraries, frequency of updates, distribution; distributed and interactive computing, datamore » base systems, user interface, UNIX operating systems, networking, compilers, Xlib, X-Graphics; documentation, updates, availability, distribution; code management in large collaborations, keeping track of program versions; and quality assurance, testing, conventions, standards.« less

Comparability of Mayo-Portland Adaptability Inventory ratings by staff, significant others and people with acquired brain injury.

PubMed

Malec, James F

2004-06-01

To determine the internal consistency, reliability and comparability of the Mayo-Portland Adaptability Inventory (MPAI-4) and sub-scales completed by people with acquired brain injury (ABI), family and significant others (SO) and rehabilitation staff. 134 people with ABI consecutively seen for outpatient rehabilitation evaluation. MPAI-4 protocols based on independent ratings by the people with ABI undergoing evaluation, SO and rehabilitation staff were submitted to Rasch Facets analysis to determine the internal consistency of the overall measure and sub-scales (Ability, Adjustment and Participation indices) for each rater group and for a composite measure based on all rater groups. Rater agreement for individual items was also examined. Rasch indicators of internal consistency were entirely within acceptable limits for 3-rater composite full scale and sub-scale measures; these indicators were generally within acceptable limits for measures based on a single rater group. Item agreement was generally acceptable; disagreements suggested various sources of bias for specific rater groups. The MPAI-4 possesses satisfactory internal consistency regardless of rating source. A composite measure based on ratings made independently by people with ABI, SO and staff may serve as a 'gold standard' for research purposes. In the clinical setting, assessment of varying perspectives and biases may not only best represent outcome as evaluated by all parties involved but be essential to developing effective rehabilitation plans.

Drafting standards on cognitive accessibility: a global collaboration.

PubMed

Steel, Emily J; Janeslätt, Gunnel

2017-05-01

The International Organization for Standardization (ISO) is working on accessibility of products to support people with cognitive impairment. Working Group 10, within the technical committee 173 (assistive products for persons with disability) was formed in 2014 to draft standards for assistive products that support people with cognitive impairment. This article explains the scope and purpose of the working group and the context for its formation, and describes the plans and process for drafting and publishing new international standards. The proposed suite of standards is presented, with examples from a draft standard on daily time management. It draws on international research evidence for the effectiveness of assistive products designed to support time management in people with cognitive impairment. Examples of assistive products and their key features are provided based on domains of time as defined in the International Classification of Functioning, Disability and Health for Children and Youth (ICF-CY). The proposed standards will provide design recommendations for features and functions that increase the accessibility of products used by people with cognitive impairment. They are intended to be used by designers, manufactures, educators and services providers, to facilitate their commitment to inclusion and demonstrate their willingness to work with accessibility regulation. Implications for Rehabilitation New standards based on universal design (UD) principles can guide the design of more user-friendly assistive products for people with cognitive impairment. Greater usability of assistive products, whether mainstream or specially-designed, will make it easier for practitioners to find and introduce assistive solutions to individuals with cognitive impairment. Greater usability of assistive products for daily time management can decrease the need for user training and support and enable participation.

ISBT 128: a global information standard

PubMed Central

2010-01-01

ISBT 128 is the global standard for the identification, labeling and information transfer of human blood, cell, tissue and organ products across international borders and disparate health care systems. The system has been designed and perfected over almost two decades to ensure accuracy, safety and efficiency for the benefit of donors, patients and health care workers worldwide. The use of the ISBT 128 standard has grown steadily since a blood bank in Estonia first implemented it in 1997. Today, more than 3,500 facility identifiers for the use of ISBT 128 have been assigned to organizations in 67 countries on six continents. The standard has been accepted by a variety of international standard setting organizations and government regulators. It is managed by ICCBBA, a not-for-profit organization based in the USA that is governed by an international volunteer board of directors. Members of the Board of Directors represent the fields of practice affected by the standard. Advisory groups comprising international experts guide the ongoing development of the ISBT 128 standard to ensure it continues to meet the needs of its users. While there is a cost associated with the implementation and use of the standard, the clear benefits in terms of improved patient safety and ability to meet regulatory traceability requirements justify the costs. PMID:20652420

Validation of the international labour office digitized standard images for recognition and classification of radiographs of pneumoconiosis.

PubMed

Halldin, Cara N; Petsonk, Edward L; Laney, A Scott

2014-03-01

Chest radiographs are recommended for prevention and detection of pneumoconiosis. In 2011, the International Labour Office (ILO) released a revision of the International Classification of Radiographs of Pneumoconioses that included a digitized standard images set. The present study compared results of classifications of digital chest images performed using the new ILO 2011 digitized standard images to classification approaches used in the past. Underground coal miners (N = 172) were examined using both digital and film-screen radiography (FSR) on the same day. Seven National Institute for Occupational Safety and Health-certified B Readers independently classified all 172 digital radiographs, once using the ILO 2011 digitized standard images (DRILO2011-D) and once using digitized standard images used in the previous research (DRRES). The same seven B Readers classified all the miners' chest films using the ILO film-based standards. Agreement between classifications of FSR and digital radiography was identical, using a standard image set (either DRILO2011-D or DRRES). The overall weighted κ value was 0.58. Some specific differences in the results were seen and noted. However, intrareader variability in this study was similar to the published values and did not appear to be affected by the use of the new ILO 2011 digitized standard images. These findings validate the use of the ILO digitized standard images for classification of small pneumoconiotic opacities. When digital chest radiographs are obtained and displayed appropriately, results of pneumoconiosis classifications using the 2011 ILO digitized standards are comparable to film-based ILO classifications and to classifications using earlier research standards. Published by Elsevier Inc.

Introduction to ISO 15189: a blueprint for quality systems in veterinary laboratories.

PubMed

Freeman, Kathleen P; Bauer, Natali; Jensen, Asger L; Thoresen, Stein

2006-06-01

A trend in human and veterinary medical laboratory management is to achieve accreditation based on international standards. The International Organization for Standardization (ISO) 15189 standard is the first developed especially for accreditation of medical laboratories, and emphasizes the laboratory-client interface. European veterinary laboratories seeking to train candidates for the certification examination of the European College of Veterinary Clinical Pathology (ECVCP) require approval by the ECVCP Laboratory Standards Committee, which bases its evaluation in part on adherence to quality systems described in the ISO 15189 standards. The purpose of this article was to introduce the latest ISO quality standard and describe its application to veterinary laboratories in Europe, specifically as pertains to accreditation of laboratories involved in training veterinary clinical pathologists. Between 2003 and 2006, the Laboratory Standards Committee reviewed 12 applications from laboratories (3 commercial and 9 university) involved in training veterinary clinical pathologists. Applicants were asked to provide a description of the facilities for training and testing, current methodology and technology, health and safety policy, quality assurance policy (including internal quality control and participation in an external quality assurance program), written standard operating procedures (SOPs) and policies, a description of the laboratory information system, and personnel and training. Also during this time period multiple informal and formal discussions among ECVCP diplomates took place as to current practices and perceived areas of concern with regard to laboratory accreditation requirements. Areas in which improvement most often was needed in veterinary laboratories applying for ECVCP accreditation were the written quality plan, defined quality requirements for the tests performed, written SOPs and policies, training records, ongoing audits and competency assessments, and processes for identifying and addressing opportunities for improvement. Recommendations were developed for a stepwise approach towards achieving ISO 15189 standards, including 3 levels of quality components. The ISO 15189 standard provides a sound framework for veterinary laboratories aspiring to meet international quality standards.

It is time to revise the international Good Clinical Practices guidelines: recommendations from non-commercial North-South collaborative trials.

PubMed

Ravinetto, Raffaella; Tinto, Halidou; Diro, Ermias; Okebe, Joseph; Mahendradhata, Yodi; Rijal, Suman; Gotuzzo, Eduardo; Lutumba, Pascal; Nahum, Alain; De Nys, Katelijne; Casteels, Minne; Boelaert, Marleen

2016-01-01

The Good Clinical Practices (GCP) codes of the WHO and the International Conference of Harmonization set international standards for clinical research. But critics argue that they were written without consideration for the challenges faced in low and middle income countries (LMICs). Based on our field experience in LMICs, we developed a non-exhaustive set of recommendations for the improvement of GCP. These cover 3 domains: ethical, legal and operational, and 8 specific issues: the double ethical review of 'externally sponsored' trials; the informed consent procedure in minors and in illiterate people; post-trial access to newly-developed products for the trial communities; the role of communities as key research actors; the definition of sponsor; and the guidance for contractual agreements, laboratory quality management systems, and quality assurance of investigational medicinal products. Issues not covered in our analysis include among others biobanking, standard of care, and study designs. The international GCP codes de facto guide national legislators and funding agencies, so the current shortcomings may weaken the regulatory oversight of international research. In addition, activities neglected by GCP are less likely to be implemented or funded. If GCP are meant to serve the interests of global society, a comprehensive revision is needed. The revised guidelines should be strongly rooted in ethics, sensitive to different sociocultural perspectives, and allow consideration for trial-specific and context-specific challenges. This can be only achieved if all stakeholders, including researchers, sponsors, regulators, ethical reviewers and patients' representatives from LMICs, as well as non-commercial researchers and sponsors from affluent countries, are transparently involved in the revision process. We hope that our limited analysis would foster advocacy for a broad and inclusive revision of the international GCP codes, to make them at the same time 'global', 'context centred' and 'patient centred'.

1997 DOE technical standards program workshop: Proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-10-01

The Department of Energy held its annual Technical Standards Program Workshop on July 8--10, 1997, at the Loews L`Enfant Plaza Hotel in Washington, DC. The workshop focused on aspects of implementation of the National Technology Transfer and Advancement Act of 1995 [Public Law (PL) 104-113] and the related revision (still pending) to OMB Circular A119 (OMB A119), Federal Participation in the Development and Use of Voluntary Standards. It also addressed DOE`s efforts in transitioning to a standards-based operating culture, and, through this transition, to change from a developer of internal technical standards to a customer of external technical standards. Themore » workshop was designed to provide a forum to better understand how the new law is affecting Department activities. Panel topics such as ``Public Law 104-113 and Its Influence on Federal Agency Standards Activities`` and ``Update on Global Standards Issues`` provided insight on both the internal and external effects of the new law. Keynote speaker Richard Meier of Meadowbrook International (and formerly the Deputy Assistant US Trade Representative) addressed the subject of international trade balance statistics. He pointed out that increases in US export figures do not necessarily indicate increases in employment. Rather, increased employment results from product growth. Mr Meier also discussed issues such as the US migration to the sue of the metric system, the impact of budget limitations on Government participation in voluntary standards organizations, international standards ISO 9000 and ISO 14000, and DOE`s role in the worldwide transition from weapons production to cleanup.« less

Preparation and application of in-fibre internal standardization solid-phase microextraction.

PubMed

Zhao, Wennan; Ouyang, Gangfeng; Pawliszyn, Janusz

2007-03-01

The in-fibre standardization method is a novel approach that has been developed for field sampling/sample preparation, in which an internal standard is pre-loaded onto a solid-phase microextraction (SPME) fibre for calibration of the extraction of target analytes in field samples. The same method can also be used for in-vial sample analysis. In this study, different techniques to load the standard to a non-porous SPME fibre were investigated. It was found that the appropriateness of the technique depends on the physical properties of the standards that are used for the analysis. Headspace extraction of the standard dissolved in pumping oil works well for volatile compounds. Conversely, headspace extraction of the pure standard is an effective approach for semi-volatile compounds. For compounds with low volatility, a syringe-fibre transfer method and direct extraction of the standard dissolved in a solvent exhibited a good reproducibility (<5% RSD). The main advantage of the approaches investigated in this study is that the standard generation vials can be reused for hundreds of analyses without exhibiting significant loss. Moreover, most of the standard loading processes studied can be performed automatically, which is efficient and precise. Finally, the standard loading technique and in-fibre standardization method were applied to a complex matrix (milk) and the results illustrated that the matrix effect can be effectively compensated for with this approach.

Partial synthesis of ganglioside and lysoganglioside lipoforms as internal standards for MS quantification.

PubMed

Gantner, Martin; Schwarzmann, Günter; Sandhoff, Konrad; Kolter, Thomas

2014-12-01

Within recent years, ganglioside patterns have been increasingly analyzed by MS. However, internal standards for calibration are only available for gangliosides GM1, GM2, and GM3. For this reason, we prepared homologous internal standards bearing nonnatural fatty acids of the major mammalian brain gangliosides GM1, GD1a, GD1b, GT1b, and GQ1b, and of the tumor-associated gangliosides GM2 and GD2. The fatty acid moieties were incorporated after selective chemical or enzymatic deacylation of bovine brain gangliosides. For modification of the sphingoid bases, we developed a new synthetic method based on olefin cross metathesis. This method was used for the preparation of a lyso-GM1 and a lyso-GM2 standard. The total yield of this method was 8.7% for the synthesis of d17:1-lyso-GM1 from d20:1/18:0-GM1 in four steps. The title compounds are currently used as calibration substances for MS quantification and are also suitable for functional studies. Copyright © 2014 by the American Society for Biochemistry and Molecular Biology, Inc.

Factor Structure, Internal Consistency, and Screening Sensitivity of the GARS-2 in a Developmental Disabilities Sample

PubMed Central

Volker, Martin A.; Dua, Elissa H.; Lopata, Christopher; Thomeer, Marcus L.; Toomey, Jennifer A.; Smerbeck, Audrey M.; Rodgers, Jonathan D.; Popkin, Joshua R.; Nelson, Andrew T.; Lee, Gloria K.

2016-01-01

The Gilliam Autism Rating Scale-Second Edition (GARS-2) is a widely used screening instrument that assists in the identification and diagnosis of autism. The purpose of this study was to examine the factor structure, internal consistency, and screening sensitivity of the GARS-2 using ratings from special education teaching staff for a sample of 240 individuals with autism or other significant developmental disabilities. Exploratory factor analysis yielded a correlated three-factor solution similar to that found in 2005 by Lecavalier for the original GARS. Though the three factors appeared to be reasonably consistent with the intended constructs of the three GARS-2 subscales, the analysis indicated that more than a third of the GARS-2 items were assigned to the wrong subscale. Internal consistency estimates met or exceeded standards for screening and were generally higher than those in previous studies. Screening sensitivity was .65 and specificity was .81 for the Autism Index using a cut score of 85. Based on these findings, recommendations are made for instrument revision. PMID:26981279

Protein Information Resource: a community resource for expert annotation of protein data

PubMed Central

Barker, Winona C.; Garavelli, John S.; Hou, Zhenglin; Huang, Hongzhan; Ledley, Robert S.; McGarvey, Peter B.; Mewes, Hans-Werner; Orcutt, Bruce C.; Pfeiffer, Friedhelm; Tsugita, Akira; Vinayaka, C. R.; Xiao, Chunlin; Yeh, Lai-Su L.; Wu, Cathy

2001-01-01

The Protein Information Resource, in collaboration with the Munich Information Center for Protein Sequences (MIPS) and the Japan International Protein Information Database (JIPID), produces the most comprehensive and expertly annotated protein sequence database in the public domain, the PIR-International Protein Sequence Database. To provide timely and high quality annotation and promote database interoperability, the PIR-International employs rule-based and classification-driven procedures based on controlled vocabulary and standard nomenclature and includes status tags to distinguish experimentally determined from predicted protein features. The database contains about 200 000 non-redundant protein sequences, which are classified into families and superfamilies and their domains and motifs identified. Entries are extensively cross-referenced to other sequence, classification, genome, structure and activity databases. The PIR web site features search engines that use sequence similarity and database annotation to facilitate the analysis and functional identification of proteins. The PIR-Inter­national databases and search tools are accessible on the PIR web site at http://pir.georgetown.edu/ and at the MIPS web site at http://www.mips.biochem.mpg.de. The PIR-International Protein Sequence Database and other files are also available by FTP. PMID:11125041

[From manual workshop to international standard maker: exploration on production standard of acupuncture needle by Chengjiang acupuncture school].

PubMed

Cheng, Jie; Cao, Yang; Xia, Youbing

2015-02-01

ABSTRACT The exploration course on production standard of acupuncture needle by Chengjiang acupuncture school is reviewed in this paper. After new China was established, acupuncture needle standard was unified by Mr. CHENG Dan-an, which guided Suzhou Hua Erfang (predecessor of Suzhou Medical Supplies Factory) to make the quality standards and testing methods of acupuncture needle and improved the production process to make the modern acupuncture needle. Based on this, Suzhou Medical Supplies Factory followed the time development pace, ac tively introduced new technology, carried out technological innovation, and constantly improved the level of production technology, as a result, it gradually developed into one of the world's largest acupuncture needle production suppliers. Meanwhile, after establishing China's first national standard on acupuncture needle (GB 2024-1980), the Suzhou Medical Supplies Factory took the lead to draft "ISO) 17218:2014 the disposable use asepsis acupuncture needle", which was officially published as an international standard. The Suzhou Medical Supplies Factory developed from a manual workshop to an international standard maker.

ANZSoilML: An Australian - New Zealand standard for exchange of soil data

NASA Astrophysics Data System (ADS)

Simons, Bruce; Wilson, Peter; Ritchie, Alistair; Cox, Simon

2013-04-01

The Australian-New Zealand soil information exchange standard (ANZSoilML) is a GML-based standard designed to allow the discovery, query and delivery of soil and landscape data via standard Open Geospatial Consortium (OGC) Web Feature Services. ANZSoilML modifies the Australian soil exchange standard (OzSoilML), which is based on the Australian Soil Information Transfer and Evaluation System (SITES) database design and exchange protocols, to meet the New Zealand National Soils Database requirements. The most significant change was the removal of the lists of CodeList terms in OzSoilML, which were based on the field methods specified in the 'Australian Soil and Land Survey Field Handbook'. These were replaced with empty CodeLists as placeholders to external vocabularies to allow the use of New Zealand vocabularies without violating the data model. Testing of the use of these separately governed Australian and New Zealand vocabularies has commenced. ANZSoilML attempts to accommodate the proposed International Organization for Standardization ISO/DIS 28258 standard for soil quality. For the most part, ANZSoilML is consistent with the ISO model, although major differences arise as a result of: • The need to specify the properties appropriate for each feature type; • The inclusion of soil-related 'Landscape' features; • Allowing the mapping of soil surfaces, bodies, layers and horizons, independent of the soil profile; • Allowing specifying the relationships between the various soil features; • Specifying soil horizons as specialisations of soil layers; • Removing duplication of features provided by the ISO Observation & Measurements standard. The International Union of Soil Sciences (IUSS) Working Group on Soil Information Standards (WG-SIS) aims to develop, promote and maintain a standard to facilitate the exchange of soils data and information. Developing an international exchange standard that is compatible with existing and emerging national and regional standards is a considerable challenge. ANZSoilML is proposed as a profile of the more generalised SoilML model being progressed through the IUSS Working Group.

Hybrid life-cycle assessment of natural gas based fuel chains for transportation.

PubMed

Strømman, Anders Hammer; Solli, Christian; Hertwich, Edgar G

2006-04-15

This research compares the use of natural gas, methanol, and hydrogen as transportation fuels. These three fuel chains start with the extraction and processing of natural gas in the Norwegian North Sea and end with final use in Central Europe. The end use is passenger transportation with a sub-compact car that has an internal combustion engine for the natural gas case and a fuel cell for the methanol and hydrogen cases. The life cycle assessment is performed by combining a process based life-cycle inventory with economic input-output data. The analysis shows that the potential climate impacts are lowest for the hydrogen fuel scenario with CO2 deposition. The hydrogen fuel chain scenario has no significant environmental disadvantage compared to the other fuel chains. Detailed analysis shows that the construction of the car contributes significantly to most impact categories. Finally, it is shown how the application of a hybrid inventory model ensures a more complete inventory description compared to standard process-based life-cycle assessment. This is particularly significant for car construction which would have been significantly underestimated in this study using standard process life-cycle assessment alone.

Solid-phase extraction and GC-MS analysis of THC-COOH method optimized for a high-throughput forensic drug-testing laboratory.

PubMed

Stout, P R; Horn, C K; Klette, K L

2001-10-01

In order to facilitate the confirmation analysis of large numbers of urine samples previously screened positive for delta9-tetrahydrocannabinol (THC), an extraction, derivitization, and GC-MS analysis method was developed. This method utilized a positive pressure manifold anion-exchange polymer-based solid-phase extraction followed by elution directly into the automated liquid sampling (ALS) vials. Rapid derivitization was accomplished using pentafluoropropionic anhydride/pentafluoropropanol (PFPA/PFPOH). Recoveries averaged 95% with a limit of detection of 0.875 ng/mL with a 3-mL sample volume. Performance of 11-nor-delta9-tetrahydrocannabinol-9-carboxylic acid (THC-COOH)-d3 and THC-COOH-d9 internal standards were evaluated. The method was linear to 900 ng/mL THC-COOH using THC-COOH-d9 with negligible contribution from the internal standard to very weak samples. Excellent agreement was seen with previous quantitations of human urine samples. More than 1000 human urine samples were analyzed using the method with 300 samples analyzed using an alternate qualifier ion (m/z 622) after some interference was observed with a qualifier ion (m/z 489). The 622 ion did not exhibit any interference even in samples with interfering peaks present in the 489 ion. The method resulted in dramatic reductions in processing time, waste production, and exposure hazards to laboratory personnel.

Changes Coming to the International System of Units

ERIC Educational Resources Information Center

Aubrecht, Gordon J., II

2012-01-01

The International System of Units (SI) is a coherent system based originally on measurements of properties of material objects. In more recent times, the adopted definitions depend on setting values of universal constants wherever possible. The last remaining human-made material object on which a standard is based is a platinum-iridium kilogram…

IFNA approved Chinese Anaesthesia Nurse Education Program: A Delphi method.

PubMed

Hu, Jiale; Fallacaro, Michael D; Jiang, Lili; Wu, Junyan; Jiang, Hong; Shi, Zhen; Ruan, Hong

2017-09-01

Numerous nurses work in operating rooms and recovery rooms or participate in the performance of anaesthesia in China. However, the scope of practice and the education for Chinese Anaesthesia Nurses is not standardized, varying from one geographic location to another. Furthermore, most nurses are not trained sufficiently to provide anaesthesia care. This study aimed to develop the first Anaesthesia Nurse Education Program in Mainland China based on the Educational Standards of the International Federation of Nurse Anaesthetists. The Delphi technique was applied to develop the scope of practice, competencies for Chinese Anaesthesia Nurses and education program. In 2014 the Anaesthesia Nurse Education Program established by the hospital applied for recognition by the International Federation of Nurse Anaesthetists. The Program's curriculum was evaluated against the IFNA Standards and recognition was awarded in 2015. The four-category, 50-item practice scope, and the three-domain, 45-item competency list were identified for Chinese Anaesthesia Nurses. The education program, which was established based on the International Federation of Nurse Anaesthetists educational standards and Chinese context, included nine curriculum modules. In March 2015, 13 candidates received and passed the 21-month education program. The Anaesthesia Nurse Education Program became the first program approved by the International Federation of Nurse Anaesthetists in China. Policy makers and hospital leaders can be confident that anaesthesia nurses graduating from this Chinese program will be prepared to demonstrate high level patient care as reflected in the recognition by IFNA of their adoption of international nurse anaesthesia education standards. Copyright © 2017 Elsevier Ltd. All rights reserved.

European validation of Real-Time PCR method for detection of Salmonella spp. in pork meat.

PubMed

Delibato, Elisabetta; Rodriguez-Lazaro, David; Gianfranceschi, Monica; De Cesare, Alessandra; Comin, Damiano; Gattuso, Antonietta; Hernandez, Marta; Sonnessa, Michele; Pasquali, Frédérique; Sreter-Lancz, Zuzsanna; Saiz-Abajo, María-José; Pérez-De-Juan, Javier; Butrón, Javier; Prukner-Radovcic, Estella; Horvatek Tomic, Danijela; Johannessen, Gro S; Jakočiūnė, Džiuginta; Olsen, John E; Chemaly, Marianne; Le Gall, Francoise; González-García, Patricia; Lettini, Antonia Anna; Lukac, Maja; Quesne, Segolénè; Zampieron, Claudia; De Santis, Paola; Lovari, Sarah; Bertasi, Barbara; Pavoni, Enrico; Proroga, Yolande T R; Capuano, Federico; Manfreda, Gerardo; De Medici, Dario

2014-08-01

The classical microbiological method for detection of Salmonella spp. requires more than five days for final confirmation, and consequently there is a need for an alternative methodology for detection of this pathogen particularly in those food categories with a short shelf-life. This study presents an international (at European level) ISO 16140-based validation study of a non-proprietary Real-Time PCR-based method that can generate final results the day following sample analysis. It is based on an ISO compatible enrichment coupled to an easy and inexpensive DNA extraction and a consolidated Real-Time PCR assay. Thirteen laboratories from seven European Countries participated to this trial, and pork meat was selected as food model. The limit of detection observed was down to 10 CFU per 25 g of sample, showing excellent concordance and accordance values between samples and laboratories (100%). In addition, excellent values were obtained for relative accuracy, specificity and sensitivity (100%) when the results obtained for the Real-Time PCR-based methods were compared to those of the ISO 6579:2002 standard method. The results of this international trial demonstrate that the evaluated Real-Time PCR-based method represents an excellent alternative to the ISO standard. In fact, it shows an equal and solid performance as well as it reduces dramatically the extent of the analytical process, and can be easily implemented routinely by the Competent Authorities and Food Industry laboratories. Copyright © 2014 Elsevier B.V. All rights reserved.

Electronic book format EPUB and Japanese typography : Mainstream people in Japan are unlikely to win international standardization battles

NASA Astrophysics Data System (ADS)

Murata, Makoto

EPUB3 is an electronic book format based on Web technologies such as HTML and CSS. EPUB3 is internationalized; in particular, it supports Japanese typography. Features such as vertical writing were introduced by first creating CSS Writing Modes and CSS Text at W3C and then creating EPUB3 at IDPF on top of them. On the basis of this standardization experience, common pitfalls for Japanese in international standardization are pointed out and a promising approach is suggested.

Large-scale progenitor cell expansion for multiple donors in a monitored hollow fibre bioreactor.

PubMed

Lambrechts, Toon; Papantoniou, Ioannis; Rice, Brent; Schrooten, Jan; Luyten, Frank P; Aerts, Jean-Marie

2016-09-01

With the increasing scale in stem cell production, a robust and controlled cell expansion process becomes essential for the clinical application of cell-based therapies. The objective of this work was the assessment of a hollow fiber bioreactor (Quantum Cell Expansion System from Terumo BCT) as a cell production unit for the clinical-scale production of human periosteum derived stem cells (hPDCs). We aimed to demonstrate comparability of bioreactor production to standard culture flask production based on a product characterization in line with the International Society of Cell Therapy in vitro benchmarks and supplemented with a compelling quantitative in vivo bone-forming potency assay. Multiple process read-outs were implemented to track process performance and deal with donor-to-donor-related variation in nutrient needs and harvest timing. The data show that the hollow fiber bioreactor is capable of robustly expanding autologous hPDCs on a clinical scale (yield between 316 million and 444 million cells starting from 20 million after ± 8 days of culture) while maintaining their in vitro quality attributes compared with the standard flask-based culture. The in vivo bone-forming assay on average resulted in 10.3 ± 3.7% and 11.0 ± 3.8% newly formed bone for the bioreactor and standard culture flask respectively. The analysis showed that the Quantum system provides a reproducible cell expansion process in terms of yields and culture conditions for multiple donors. Copyright © 2016 International Society for Cellular Therapy. Published by Elsevier Inc. All rights reserved.

Study of twenty preparations of human albumin solution which failed in quality control testing due to elevated sodium content, a poor internal quality control at manufacturing unit.

PubMed

Prasad, J P; Madhu, Y; Singh, Surinder; Soni, G R; Agnihotri, N; Singh, Varsha; Kumar, Pradeep; Jain, Nidhi; Prakash, Anu; Singh, Varun

2016-11-01

Current study is conducted in our laboratory due to failure in quality control testing of twenty batches of Human Albumin solution in which sodium content is higher than the prescribed limit. These batches are received in short duration from indigenous manufacturer and is the first incident of failure of Human albumin preparation in sodium content of manufacturer. On request of manufacturer, study is conducted to rule out the cause. Repeat testing of each out of specification batch is conducted and a trend analysis is drawn between our findings and manufacturer's results, also study of trend analysis of manufacturer for the last one year. Trend analysis data indicated towards poor consistency of batches with major shift at various time intervals in sodium content of human albumin preparation. Further analysis rule out that non-traceable quality of standard used in the internal quality control testing by manufacturer is the root cause of the problem. Copyright © 2016 International Alliance for Biological Standardization. Published by Elsevier Ltd. All rights reserved.

Analysis of clonazepam in a tablet dosage form using smallbore HPLC.

PubMed

Spell, J C; Stewart, J T

1998-11-01

A stability indicating, reversed phase high-performance liquid chromatographic method utilizing a smallbore HPLC column has been developed for the determination of clonazepam in a commercial tablet dosage form. The use of a small bore column results in a substantial solvent savings, as well as a greater mass sensitivity, especially in the identification of degradation peaks in a chromatogram. The method involves ultraviolet detection at 254 nm and utilized a 150 x 3.0 mm i.d. column packed with 3 microm octyldecylsilane particles with a mobile phase of water methanol acetonitrile (40:30:30, v/v/v) at a flow rate of 400 microl min(-1) at ambient temperature, with and without the use of 1,2-dichlorobenzene as the internal standard. The current USP method for the analysis of clonazepam using a 300 x 3.9 mm i.d. conventional octyldecylsilane column was utilized as a comparison to the smallbore method. The retention times for clonazepam and the internal standard on the 3.0 mm i.d. column were 4.0 and 12.5 min, respectively. The intra- and interday RSDs on the 3.0 mm i.d. column were < 0.55% (n =4) using the internal standard, and < 0.19% (n = 4) without the internal standard at the lower limit of the standard curve, 50 microg ml(-1) and had a limit of detection of 24 ng ml(-1). The assay using the 3.0 mm i.d. column was shown to be suitable for measuring clonazepam in a tablet dosage form.

Cross-cultural nursing research.

PubMed

Suhonen, Riitta; Saarikoski, Mikko; Leino-Kilpi, Helena

2009-04-01

International cross-cultural comparative nursing research is considered important for the advancement of nursing knowledge offering a global perspective for nursing. Although this is recognised in policy statements and quality standards, international comparative studies are rare in database citations. To highlight the need for cross-cultural comparative research in nursing and to share some of the insights gained after conducting three international/cross-cultural comparative studies. These are: an examination of patients' autonomy, privacy and informed consent in nursing interventions BIOMED 1998-2001, the ICProject International Patient Study 2002-2006 and the Ethical Codes in Nursing (ECN) project 2003-2005. There are three critical issues raised here for discussion from the international cross-cultural studies. These are: the planning and formulating of an international study, the conduct of cross-cultural research including the implementation of rigorous data collection and analysis and the reporting and implementing the results. International and cross-cultural nursing research is powerful tool for the improvement of clinical nursing practise, education and management and advancement of knowledge. Such studies should be carried out in order to improve European evidence based health care development in which the patients' perspective plays an important part in the evaluation and benchmarking of services.

Parallel synthesis: a new approach for developing analytical internal standards. Application to the analysis of patulin by gas chromatography-mass spectrometry.

PubMed

Llovera, Montserrat; Balcells, Mercè; Torres, Mercè; Canela, Ramon

2005-08-24

The polymer-assisted reaction of 4-(hydroxymethyl)furan-2(5H)-one (4HM2F) with 21 carboxylic acids using polystyrene-carbodiimide (PS-carbodiimide) yielded an ester library. Four of the esters, (5-oxo-2,5-dihydrofuran-3-yl)methyl acetate (IS-1), (5-oxo-2,5-dihydrofuran-3-yl)methyl butyrate (IS-2), (5-oxo-2,5-dihydrofuran-3-yl)methyl 2-methylpropanoate (IS-3), and (5-oxo-2,5-dihydrofuran-3-yl)methyl chloroacetate (IS-4), were tested as internal standards for the quantification of patulin in apple juice by gas chromatography-mass spectrometry in the selected ion monitoring mode (GC-MS-SIM). The developed method combines an AOAC official extractive step and a GC-MS-SIM analysis. Using a chromatographic column containing trifluoropropylmethylpolysiloxane as the stationary phase and IS-1 as the internal standard, it was possible to perform an accurate and precise quantification of underivatizated patulin in apple juice at concentrations down to 6 microg/L. A detection limit of 1 microg/L was established.

Concept of Draft International Standard for a Unified Approach to Space Program Quality Assurance

NASA Astrophysics Data System (ADS)

Stryzhak, Y.; Vasilina, V.; Kurbatov, V.

2002-01-01

For want of the unified approach to guaranteed space project and product quality assurance, implementation of many international space programs has become a challenge. Globalization of aerospace industry and participation of various international ventures with diverse quality assurance requirements in big international space programs requires for urgent generation of unified international standards related to this field. To ensure successful fulfillment of space missions, aerospace companies should design and process reliable and safe products with properties complying or bettering User's (or Customer's) requirements. Quality of the products designed or processed by subcontractors (or other suppliers) should also be in compliance with the main user (customer)'s requirements. Implementation of this involved set of unified requirements will be made possible by creating and approving a system (series) of international standards under a generic title Space Product Quality Assurance based on a system consensus principle. Conceptual features of the baseline standard in this system (series) should comprise: - Procedures for ISO 9000, CEN and ECSS requirements adaptation and introduction into space product creation, design, manufacture, testing and operation; - Procedures for quality assurance at initial (design) phases of space programs, with a decision on the end product made based on the principle of independence; - Procedures to arrange incoming inspection of products delivered by subcontractors (including testing, audit of supplier's procedures, review of supplier's documentation), and space product certification; - Procedures to identify materials and primary products applied; - Procedures for quality system audit at the component part, primary product and materials supplier facilities; - Unified procedures to form a list of basic performances to be under configuration management; - Unified procedures to form a list of critical space product components, and unified procedures to define risks related to the specific component application and evaluate safety for the entire program implementation. In the eyes of the authors, those features together with a number of other conceptual proposals should constitute a unified standard-technical basis for implementing international space programs.

The COST Action IC0604 "Telepathology Network in Europe" (EURO-TELEPATH).

PubMed

García-Rojo, Marcial; Gonçalves, Luís; Blobel, Bernd

2012-01-01

The COST Action IC0604 "Telepathology Network in Europe" (EURO-TELEPATH) is a European COST Action that has been running from 2007 to 2011. COST Actions are funded by the COST (European Cooperation in the field of Scientific and Technical Research) Agency, supported by the Seventh Framework Programme for Research and Technological Development (FP7), of the European Union. EURO-TELEPATH's main objectives were evaluating and validating the common technological framework and communication standards required to access, transmit and manage digital medical records by pathologists and other medical professionals in a networked environment. The project was organized in four working groups. orking Group 1 "Business modeling in pathology" has designed main pathology processes - Frozen Study, Formalin Fixed Specimen Study, Telepathology, Cytology, and Autopsy -using Business Process Modeling Notation (BPMN). orking Group 2 "Informatics standards in pathology" has been dedicated to promoting the development and application of informatics standards in pathology, collaborating with Integrating the Healthcare Enterprise (IHE), Digital Imaging and Communications in Medicine (DICOM), Health Level Seven (HL7), and other standardization bodies. Working Group 3 "Images: Analysis, Processing, Retrieval and Management" worked on the use of virtual or digital slides that are fostering the use of image processing and analysis in pathology not only for research purposes, but also in daily practice. Working Group 4 "Technology and Automation in Pathology" was focused on studying the adequacy of current existing technical solutions, including, e.g., the quality of images obtained by slide scanners, or the efficiency of image analysis applications. Major outcome of this action are the collaboration with international health informatics standardization bodies to foster the development of standards for digital pathology, offering a new approach for workflow analysis, based in business process modeling. Health terminology standardization research has become a topic of high interest. Future research work should focus on standardization of automatic image analysis and tissue microarrays imaging.

International standards for monoclonal antibodies to support pre- and post-marketing product consistency: Evaluation of a candidate international standard for the bioactivities of rituximab

PubMed Central

Prior, Sandra; Hufton, Simon E.; Dougall, Thomas; Rigsby, Peter; Bristow, Adrian

2018-01-01

ABSTRACT The intrinsic complexity and heterogeneity of therapeutic monoclonal antibodies is built into the biosimilarity paradigm where critical quality attributes are controlled in exhaustive comparability studies with the reference medicinal product. The long-term success of biosimilars will depend on reassuring healthcare professionals and patients of consistent product quality, safety and efficacy. With this aim, the World Health Organization has endorsed the need for public bioactivity standards for therapeutic monoclonal antibodies in support of current controls. We have developed a candidate international potency standard for rituximab that was evaluated in a multi-center collaborative study using participants' own qualified Fc-effector function and cell-based binding bioassays. Dose-response curve model parameters were shown to reflect similar behavior amongst rituximab preparations, albeit with some differences in potency. In the absence of a common reference standard, potency estimates were in poor agreement amongst laboratories, but the use of the candidate preparation significantly reduced this variability. Our results suggest that the candidate rituximab standard can support bioassay performance and improve data harmonization, which when implemented will promote consistency of rituximab products over their life-cycles. This data provides the first scientific evidence that a classical standardization exercise allowing traceability of bioassay data to an international standard is also applicable to rituximab. However, we submit that this new type of international standard needs to be used appropriately and its role not to be mistaken with that of the reference medicinal product. PMID:28985159

Le Fort III Distraction With Internal vs External Distractors: A Cephalometric Analysis.

PubMed

Robertson, Kevin J; Mendez, Bernardino M; Bruce, William J; McDonnell, Brendan D; Chiodo, Michael V; Patel, Parit A

2018-05-01

This study compares the change in midface position following Le Fort III advancement using either rigid external distraction (group 1) or internal distraction (group 2). We hypothesized that, with reference to right-facing cephalometry, internal distraction would result in increased clockwise rotation and inferior displacement of the midface. Le Fort III osteotomies and standardized distraction protocols were performed on 10 cadaveric specimens per group. Right-facing lateral cephalograms were traced and compared across time points to determine change in position at points orbitale, anterior nasal spine (ANS), A-point, and angle ANB. Institutional. Twenty cadaveric head specimens. Standard subcranial Le Fort III osteotomies were performed from a coronal approach and adequately mobilized. The specified distraction mechanism was applied and advanced by 15 mm. Changes of position were calculated at various skeletal landmarks: orbitale, ANS, A-point, and ANB. Group 1 demonstrated relatively uniform x-axis advancement with minimal inferior repositioning at the A-point, ANS, and orbitale. Group 2 demonstrated marked variation in x-axis advancement among the 3 points, along with a significant inferior repositioning and clockwise rotation of the midface ( P < .0001). External distraction resulted in more uniform advancement of the midface, whereas internal distraction resulted in greater clockwise rotation and inferior displacement. External distraction appears to provide increased vector control of the midface, which is important in creating a customized distraction plan based on the patient's individual occlusal and skeletal needs.

76 FR 18645 - Third Party Testing for Certain Children's Products; Notice of Requirements for Accreditation of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-05

... referenced: The existing CPSC Standard Operating Procedure for Determining Lead (Pb) in Paint and Other... explicitly require the use of a particular standard operating procedure. Additionally, the following....'' It is still based on standard test procedures, such as ASTM International (formerly the American...

Laboratory and field based evaluation of chromatography ...

EPA Pesticide Factsheets

The Monitor for AeRosols and GAses in ambient air (MARGA) is an on-line ion-chromatography-based instrument designed for speciation of the inorganic gas and aerosol ammonium-nitrate-sulfate system. Previous work to characterize the performance of the MARGA has been primarily based on field comparison to other measurement methods to evaluate accuracy. While such studies are useful, the underlying reasons for disagreement among methods are not always clear. This study examines aspects of MARGA accuracy and precision specifically related to automated chromatography analysis. Using laboratory standards, analytical accuracy, precision, and method detection limits derived from the MARGA chromatography software are compared to an alternative software package (Chromeleon, Thermo Scientific Dionex). Field measurements are used to further evaluate instrument performance, including the MARGA’s use of an internal LiBr standard to control accuracy. Using gas/aerosol ratios and aerosol neutralization state as a case study, the impact of chromatography on measurement error is assessed. The new generation of on-line chromatography-based gas and particle measurement systems have many advantages, including simultaneous analysis of multiple pollutants. The Monitor for Aerosols and Gases in Ambient Air (MARGA) is such an instrument that is used in North America, Europe, and Asia for atmospheric process studies as well as routine monitoring. While the instrument has been evaluat

International Law Studies. The War in Iraq: A Legal Analysis. Violume 86

DTIC Science & Technology

2010-01-01

AND ADDRESS(ES) Naval War College,International Law Studies ,686 Cushing Road ,Newport,RI,02841-1207 8. PERFORMING ORGANIZATION REPORT NUMBER 9...ABSTRACT unclassified c. THIS PAGE unclassified Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 International Law Studies Volume...INTERNATIONAL LAW STUDIES SERIES PRESIDENT, NAVAL WAR COLLEGE Rear Admiral James P. Wisecup, USN PROVOST, NAVAL WAR COLLEGE Ambassador Mary Ann Peters (Ret

Peptide code-on-a-microplate for protease activity analysis via MALDI-TOF mass spectrometric quantitation.

PubMed

Hu, Junjie; Liu, Fei; Ju, Huangxian

2015-04-21

A peptide-encoded microplate was proposed for MALDI-TOF mass spectrometric (MS) analysis of protease activity. The peptide codes were designed to contain a coding region and the substrate of protease for enzymatic cleavage, respectively, and an internal standard method was proposed for the MS quantitation of the cleavage products of these peptide codes. Upon the cleavage reaction in the presence of target proteases, the coding regions were released from the microplate, which were directly quantitated by using corresponding peptides with one-amino acid difference as the internal standards. The coding region could be used as the unique "Protease ID" for the identification of corresponding protease, and the amount of the cleavage product was used for protease activity analysis. Using trypsin and chymotrypsin as the model proteases to verify the multiplex protease assay, the designed "Trypsin ID" and "Chymotrypsin ID" occurred at m/z 761.6 and 711.6. The logarithm value of the intensity ratio of "Protease ID" to internal standard was proportional to trypsin and chymotrypsin concentration in a range from 5.0 to 500 and 10 to 500 nM, respectively. The detection limits for trypsin and chymotrypsin were 2.3 and 5.2 nM, respectively. The peptide-encoded microplate showed good selectivity. This proposed method provided a powerful tool for convenient identification and activity analysis of multiplex proteases.

Use of a problem-based learning teaching model for undergraduate medical and nursing education: a systematic review and meta-analysis

PubMed Central

Sayyah, Mehdi; Shirbandi, Kiarash; Saki-Malehi, Amal; Rahim, Fakher

2017-01-01

Objectives The aim of this systematic review and meta-analysis was to evaluate the problem-based learning (PBL) method as an alternative to conventional educational methods in Iranian undergraduate medical courses. Materials and methods We systematically searched international datasets banks, including PubMed, Scopus, and Embase, and internal resources of banks, including MagirIran, IranMedex, IranDoc, and Scientific Information Database (SID), using appropriate search terms, such as “PBL”, “problem-based learning”, “based on problems”, “active learning”, and“ learner centered”, to identify PBL studies, and these were combined with other key terms such as “medical”, “undergraduate”, “Iranian”, “Islamic Republic of Iran”, “I.R. of Iran”, and “Iran”. The search included the period from 1980 to 2016 with no language limits. Results Overall, a total of 1,057 relevant studies were initially found, of which 21 studies were included in the systematic review and meta-analysis. Of the 21 studies, 12 (57.14%) had a high methodological quality. Considering the pooled effect size data, there was a significant difference in the scores (standardized mean difference [SMD]=0.80, 95% CI [0.52, 1.08], P<0.000) in favor of PBL, compared with the lecture-based method. Subgroup analysis revealed that using PBL alone is more favorable compared to using a mixed model with other learning methods such as lecture-based learning (LBL). Conclusion The results of this systematic review showed that using PBL may have a positive effect on the academic achievement of undergraduate medical courses. The results suggest that teachers and medical education decision makers give more attention on using this method for effective and proper training. PMID:29042827

Adherence of preventive oral care products in the Syrian market to evidence-based international recommendations.

PubMed

Habes, D; Mahzia, R; Nakhleh, K; Joury, E

2016-09-25

No study has investigated the availability and adherence of preventive oral care products on the Syrian market to evidence-based international recommendations. Data were collected in 2012, and updated in 2016, in terms of availability, characteristics and adherence to evidence-based international recommendations. Few preventive products adhered to the recommendations. Despite the large decrease in the number of oral care products on the Syrian market, due to the Syrian crisis, nonadherence of some of the available products is still present. A multisectorial approach at a policy level is needed to address such important limitations. The Syrian Ministry of Health should reform regulations for fluoride products to become subject to drug monitoring systems; the Syrian Arab Committee for Measurements and Standards needs to update its standards; and the Syrian General Dental Association should distribute a preventive booklet to dental practitioners.

Multi-class, multi-residue analysis of pesticides, polychlorinated biphenyls, polycyclic aromatic hydrocarbons, polybrominated diphenyl ethers and novel flame retardants in fish using fast, low-pressure gas chromatography-tandem mass spectrometry.

PubMed

Sapozhnikova, Yelena; Lehotay, Steven J

2013-01-03

A multi-class, multi-residue method for the analysis of 13 novel flame retardants, 18 representative pesticides, 14 polychlorinated biphenyl (PCB) congeners, 16 polycyclic aromatic hydrocarbons (PAHs), and 7 polybrominated diphenyl ether (PBDE) congeners in catfish muscle was developed and evaluated using fast low pressure gas chromatography triple quadrupole tandem mass spectrometry (LP-GC/MS-MS). The method was based on a QuEChERS (quick, easy, cheap, effective, rugged, safe) extraction with acetonitrile and dispersive solid-phase extraction (d-SPE) clean-up with zirconium-based sorbent prior to LP-GC/MS-MS analysis. The developed method was evaluated at 4 spiking levels and further validated by analysis of NIST Standard Reference Materials (SRMs) 1974B and 1947. Sample preparation for a batch of 10 homogenized samples took about 1h/analyst, and LP-GC/MS-MS analysis provided fast separation of multiple analytes within 9min achieving high throughput. With the use of isotopically labeled internal standards, recoveries of all but one analyte were between 70 and 120% with relative standard deviations less than 20% (n=5). The measured values for both SRMs agreed with certified/reference values (72-119% accuracy) for the majority of analytes. The detection limits were 0.1-0.5ng g(-1) for PCBs, 0.5-10ng g(-1) for PBDEs, 0.5-5ng g(-1) for select pesticides and PAHs and 1-10ng g(-1) for flame retardants. The developed method was successfully applied for analysis of catfish samples from the market. Published by Elsevier B.V.

Economic analysis of waste-to-energy industry in China.

PubMed

Zhao, Xin-Gang; Jiang, Gui-Wu; Li, Ang; Wang, Ling

2016-02-01

The generation of municipal solid waste is further increasing in China with urbanization and improvement of living standards. The "12th five-year plan" period (2011-2015) promotes waste-to-energy technologies for the harmless disposal and recycling of municipal solid waste. Waste-to-energy plant plays an important role for reaching China's energy conservation and emission reduction targets. Industrial policies and market prospect of waste-to-energy industry are described. Technology, cost and benefit of waste-to-energy plant are also discussed. Based on an economic analysis of a waste-to-energy project in China (Return on Investment, Net Present Value, Internal Rate of Return, and Sensitivity Analysis) the paper makes the conclusions. Copyright © 2015 Elsevier Ltd. All rights reserved.

Comparison summary: Various countries' standards for classroom acoustics

NASA Astrophysics Data System (ADS)

Evans, Jack B.

2005-09-01

A comparative summary presentation of many countries' national acoustical standards for classroom acoustics will be presented. Facility renovation or new construction is subject to standards or regulations that control reverberation decay time, sound isolation between interior spaces, intrusive noise from the exterior environment, background noise from building systems and/or user installed classroom equipment. Child learner physical conditions are reviewed, based on many researchers' published results in North America and Europe, in regard to the special building acoustical requirements needed to achieve good classroom environments. In response to the authors' solicitations, colleagues from many nations provided facts, opinions, and reference for their own countries' standards, which are presented in categorical matrix format, including ANSI S12.60-2002, the relatively new American classroom acoustics standard. Summary results from I-INCE TC4 working group study on international standards are also incorporated. [This presentation is derived from the international classroom standards portion (only) of a paper originally written for the 11th International Meeting on Low Frequency Noise and Vibration and its Control, Maastricht, The Netherlands in 2004 with recent updates.

Scapular thickness--implications for fracture fixation.

PubMed

Burke, Charity S; Roberts, Craig S; Nyland, John A; Radmacher, Paula G; Acland, Robert D; Voor, Michael J

2006-01-01

The purpose of this study was to measure and map scapula osseous thickness to identify the optimal areas for internal fixation. Eighteen (9 pairs) scapulae from 2 female and 7 male cadavers were used. After harvest and removal of all soft tissues, standardized measurement lines were made based on anatomic landmarks. For consistency among scapulae, measurements were taken at standard percentage intervals along each line approximating the distance between two consecutive reconstruction plate screw holes. Two-mm-diameter drill holes were made at each point, and a standard depth gauge was used to measure thickness. The glenoid fossa (25 mm) displayed the greatest mean osseous thickness, followed by the lateral scapular border (9.7 mm), the scapula spine (8.3 mm), and the central portion of the body of the scapula (3.0 mm). To optimize screw purchase and internal fixation strength, the lateral border, the lateral aspect of the base of the scapula spine, and the scapula spine itself should be used for anatomic sites of internal fixation of scapula fractures.

International Standards. U.S. Metric Study Report.

ERIC Educational Resources Information Center

Huntoon, Robert D.; And Others

In this first interim report on the feasibility of a United States changeover to a metric system stems from the U.S. Metric Study, a series of conclusions and recommendations, based upon a national survey of the role of SI (System's International) units in international trade and other areas of foreign relations, includes the following…

[Internal audit in medical laboratory: what means of control for an effective audit process?].

PubMed

Garcia-Hejl, Carine; Chianéa, Denis; Dedome, Emmanuel; Sanmartin, Nancy; Bugier, Sarah; Linard, Cyril; Foissaud, Vincent; Vest, Philippe

2013-01-01

To prepare the French Accreditation Committee (COFRAC) visit for initial certification of our medical laboratory, our direction evaluated its quality management system (QMS) and all its technical activities. This evaluation was performed owing an internal audit. This audit was outsourced. Auditors had an expertise in audit, a whole knowledge of biological standards and were independent. Several nonconformities were identified at that time, including a lack of control of several steps of the internal audit process. Hence, necessary corrective actions were taken in order to meet the requirements of standards, in particular, the formalization of all stages, from the audit program, to the implementation, review and follow-up of the corrective actions taken, and also the implementation of the resources needed to carry out audits in a pre-established timing. To ensure an optimum control of each step, the main concepts of risk management were applied: process approach, root cause analysis, effects and criticality analysis (FMECA). After a critical analysis of our practices, this methodology allowed us to define our "internal audit" process, then to formalize it and to follow it up, with a whole documentary system.

Isotopic exchange during derivatization of platelet activating factor for gas chromatography-mass spectrometry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haroldsen, P.E.; Gaskell, S.J.; Weintraub, S.T.

1991-04-01

One approach to the quantitative analysis of platelet activating factor (PAF, 1-O-alkyl-2-acetyl-sn-glycerol-3-phosphocholine; also referred to as AGEPC, alkyl glyceryl ether phosphocholine) is hydrolytic removal of the phosphocholine group and conversion to an electron-capturing derivative for gas chromatography-negative ion mass spectrometry. (2H3)Acetyl-AGEPC has been commonly employed as an internal standard. When 1-hexadecyl-2-(2H3)acetyl glycerol (obtained by enzymatic hydrolysis of (2H3)-C16:0 AGEPC) is treated with pentafluorobenzoyl chloride at 120 degrees C, the resulting 3-pentafluorobenzoate derivative shows extensive loss of the deuterium label. This exchange is evidently acid-catalyzed since derivatization of 1-hexadecyl-2-acetyl glycerol under the same conditions in the presence of a trace ofmore » 2HCl results in the incorporation of up to three deuterium atoms. Isotope exchange can be avoided if the reaction is carried out at low temperature in the presence of base. Direct derivatization of (2H3)-C16:0 AGEPC by treatment with pentafluorobenzoyl chloride or heptafluorobutyric anhydride also results in loss of the deuterium label. The use of (13C2)-C16:0 AGEPC as an internal standard is recommended for rigorous quantitative analysis.« less

Determination of phenol, m-, o- and p-cresol, p-aminophenol and p-nitrophenol in urine by high-performance liquid chromatography.

PubMed

Brega, A; Prandini, P; Amaglio, C; Pafumi, E

1990-12-28

A method for the biological monitoring of human exposure to aromatic hydrocarbons, nitrocompounds, amines and phenols has been developed. Phenol, cresols, p-aminophenol, p-nitrophenol and their glucorono- or sulpho-conjugates, were quantified by HPLC; 4-chlorphenol was added as internal standard. After enzymatic hydrolysis, the free compounds were extracted with an organic solvent and analyzed by an isocratic HPLC Perkin Elmer system at ambient temperature and at a flow-rate of 1 ml/min. The column was a reversed-phase Pecosphere 3 x 3 C18 Perkin Elmer; the mobile phase was a 30:70:0.1 (v/v/v) methanol-water-orthophosphoric acid mixture and the chromatogram was monitored at 215 nm. Identification was based on retention time and quantification was performed by automatic peak height determination, corrected for the internal standard. The recovery was ca. 95% for phenol and cresols; 90% for p-nitrophenol; 85% for p-aminophenol; the coefficients of variance were less than 6% within analysis (n = 20) and less than 10% between analysis (n = 20). The detection limits, at a signal/noise ratio of 2, were 0.5 mg/l for phenol and cresols and 1 mg/l for p-aminophenol and p-nitrophenol.

Differential correlation of suicide and homicide rates according to geographical areas: A study with population-level data.

PubMed

Fountoulakis, Konstantinos N; Gonda, Xenia

2017-03-01

The current study investigated the relationship of suicide and homicide rates internationally. WHO database mortality data for 82 countries concerning suicide, homicides, and cancer and traffic accidents as controls were used. The analysis included Pearson correlation and multiple linear regression analysis. Worldwide homicidal rates explained 55.42%, 43.86% and 41.7% of male and 22.0%, 22.14% and 13.25% of female suicides for 2000, 2005 and 2010 respectively. In Europe there was a positive correlation between male suicide rates and all homicide rates including homicide rates in both genders, in male victims, and in female victims. In America there is no significant correlation. In Asia there is a significant correlation of male suicidal rates only with homicide rates of female victims. We observed marked and interesting differences in the pattern of association between Europe and the Americas. Overall the current paper suggests that at least in some human populations, suicidality and homicidality share common etiopathogenetic substrates and could be triggered by the same internal or external events or might develop based on common genetic background. Empirically it has been suggested that suicide is related to higher living standards while murder is related to poor quality of life and lower living standards. Copyright © 2017 Elsevier Ireland Ltd. All rights reserved.

Approaches to setting organism-based ballast water discharge standards

EPA Science Inventory

As a major vector by which foreign species invade coastal and freshwater waterbodies, ballast water discharge from ships is recognized as a major environmental threat. The International Maritime Organization (IMO) drafted an international ballast water treaty establishing ballast...

Internal Quality Control Practices in Coagulation Laboratories: recommendations based on a patterns-of-practice survey.

PubMed

McFarlane, A; Aslan, B; Raby, A; Moffat, K A; Selby, R; Padmore, R

2015-12-01

Internal quality control (IQC) procedures are crucial for ensuring accurate patient test results. The IQMH Centre for Proficiency Testing conducted a web-based survey to gather information on the current IQC practices in coagulation testing. A questionnaire was distributed to 174 Ontario laboratories licensed to perform prothrombin time (PT) and activated partial thromboplastin time (APTT). All laboratories reported using two levels of commercial QC (CQC); 12% incorporate pooled patient plasma into their IQC program; >68% run CQC at the beginning of each shift; 56% following maintenance, with reagent changes, during a shift, or with every repeat sample; 6% only run CQC at the beginning of the day and 25% when the instruments have been idle for a defined period of time. IQC run frequency was determined by manufacturer recommendations (71%) but also influenced by the stability of test (27%), clinical impact of an incorrect test result (25%), and sample's batch number (10%). IQC was monitored using preset limits based on standard deviation (66%), precision goals (46%), or allowable performance limits (36%). 95% use multirules. Failure actions include repeating the IQC (90%) and reporting patient results; if repeat passes, 42% perform repeat analysis of all patient samples from last acceptable IQC. Variability exists in coagulation IQC practices among Ontario clinical laboratories. The recommendations presented here would be useful in encouraging standardized IQC practices. © 2015 John Wiley & Sons Ltd.

The Effect of Seasonal and Long-Period Geopotential Variations on the GPS Orbits

NASA Technical Reports Server (NTRS)

Melachroinos, Stavros A.; Lemoine, Frank G.; Chinn, Douglas S.; Zelensky, Nikita P.; Nicholas, Joseph B.; Beckley, Brian D.

2013-01-01

We examine the impact of using seasonal and long-period time-variable gravity field (TVG) models on GPS orbit determination, through simulations from 1994 to 2012. The models of time-variable gravity that we test include the GRGS release RL02 GRACE-derived 10-day gravity field models up to degree and order 20 (grgs20x20), a 4 x 4 series of weekly coefficients using GGM03S as a base derived from SLR and DORIS tracking to 11 satellites (tvg4x4), and a harmonic fit to the above 4 x 4 SLR-DORIS time series (goco2s_fit2). These detailed models are compared to GPS orbit simulations using a reference model (stdtvg) based on the International Earth Rotation Service (IERS) and International GNSS Service (IGS) repro1 standards. We find that the new TVG modeling produces significant along, cross-track orbit differences as well as annual, semi-annual, draconitic and long-period effects in the Helmert translation parameters (Tx, Ty, Tz) of the GPS orbits with magnitudes of several mm. We show that the simplistic TVG modeling approach used by all of the IGS Analysis Centers, which is based on the models provided by the IERS standards, becomes progressively less adequate following 2006 when compared to the seasonal and long-period TVG models.

An instrument to characterize the environment for residents' evidence-based medicine learning and practice.

PubMed

Mi, Misa; Moseley, James L; Green, Michael L

2012-02-01

Many residency programs offer training in evidence-based medicine (EBM). However, these curricula often fail to achieve optimal learning outcomes, perhaps because they neglect various contextual factors in the learning environment. We developed and validated an instrument to characterize the environment for EBM learning and practice in residency programs. An EBM Environment Scale was developed following scale development principles. A survey was administered to residents across six programs in primary care specialties at four medical centers. Internal consistency reliability was analyzed with Cronbach's coefficient alpha. Validity was assessed by comparing predetermined subscales with the survey's internal structure as assessed via factor analysis. Scores were also compared for subgroups based on residency program affiliation and residency characteristics. Out of 262 eligible residents, 124 completed the survey (response rate 47%). The overall mean score was 3.89 (standard deviation=0.56). The initial reliability analysis of the 48-item scale had a high reliability coefficient (Cronbach α=.94). Factor analysis and further item analysis resulted in a shorter 36-item scale with a satisfactory reliability coefficient (Cronbach α=.86). Scores were higher for residents with prior EBM training in medical school (4.14 versus 3.62) and in residency (4.25 versus 3.69). If further testing confirms its properties, the EBM Environment Scale may be used to understand the influence of the learning environment on the effectiveness of EBM training. Additionally, it may detect changes in the EBM learning environment in response to programmatic or institutional interventions.

Quantification of the HIV-integrase inhibitor raltegravir (MK-0518) in human plasma by high-performance liquid chromatography with fluorescence detection.

PubMed

Poirier, Jean-Marie; Robidou, Pascal; Jaillon, Patrice

2008-05-15

A simple and sensitive HLPC method with fluorescence detection was developed for the accurate determination of the first licensed HIV integrase inhibitor raltegravir in human plasma. A 500-microL plasma sample was spiked with delavirdine as internal standard and subjected to liquid-liquid extraction based on a previously described assay i.e. using hexane/methylene chloride (1:1, v/v%) at pH 4.0. HPLC was performed using a Symmetry Shield RP18 column (150 mm x 4.6 mm), a gradient elution of acetonitrile -0.01% (v/v) triethylamine in water adjusted to pH 3.0 at a flow rate of 1 mL/min and a fluorimetric detector set at 299 and 396 nm as excitation and emission wavelengths, respectively. The retention time was 5.0 min for internal standard and 6.4 min for raltegravir. Calibration curves were linear in the range 5-1000 ng/mL and the accuracy of quality control samples in the range 10-750 ng/mL varied from 98.3 to 99.1% and 98.3 to 101.0% of the nominal concentrations for intra-day and day-to-day analysis, respectively with a precision of 6.3% or less. Among the other antiretroviral drugs which can be given in association to HIV-infected patients, none was found to interfere with internal standard or raltegravir. The described assay was developed for the purpose of therapeutic drug of this HIV integrase inhibitor.

International Standards for Genomes, Transcriptomes, and Metagenomes

PubMed Central

Mason, Christopher E.; Afshinnekoo, Ebrahim; Tighe, Scott; Wu, Shixiu; Levy, Shawn

2017-01-01

Challenges and biases in preparing, characterizing, and sequencing DNA and RNA can have significant impacts on research in genomics across all kingdoms of life, including experiments in single-cells, RNA profiling, and metagenomics (across multiple genomes). Technical artifacts and contamination can arise at each point of sample manipulation, extraction, sequencing, and analysis. Thus, the measurement and benchmarking of these potential sources of error are of paramount importance as next-generation sequencing (NGS) projects become more global and ubiquitous. Fortunately, a variety of methods, standards, and technologies have recently emerged that improve measurements in genomics and sequencing, from the initial input material to the computational pipelines that process and annotate the data. Here we review current standards and their applications in genomics, including whole genomes, transcriptomes, mixed genomic samples (metagenomes), and the modified bases within each (epigenomes and epitranscriptomes). These standards, tools, and metrics are critical for quantifying the accuracy of NGS methods, which will be essential for robust approaches in clinical genomics and precision medicine. PMID:28337071

Study on Quality Standard of Processed Curcuma Longa Radix

PubMed Central

Zhao, Yongfeng; Quan, Liang; Zhou, Haiting; Cao, Dong; Li, Wenbing; Yang, Zhuo

2017-01-01

To control the quality of Curcuma Longa Radix by establishing quality standards, this paper increased the contents of extract and volatile oil determination. Meanwhile, the curcumin was selected as the internal marker, and the relative correlation factors (RCFs) of demethoxycurcumin and bisdemethoxycurcumin were established by high performance liquid chromatography (HPLC). The contents of multicomponents were calculated based on their RCFs. The rationality and feasibility of the methods were evaluated by comparison of the quantitative results between external standard method (ESM) and quantitative analysis of multicomponents by single-marker (QAMS). Ethanol extracts ranged from 9.749 to 15.644% and the mean value was 13.473%. The volatile oil ranged from 0.45 to 0.90 mL/100 g and the mean value was 0.66 mL/100 g. This method was accurate and feasible and could provide a reference for further comprehensive and effective control of the quality standard of Curcuma Longa Radix and its processed products. PMID:29375640

Frontally eluted components procedure with thin layer chromatography as a mode of sample preparation for high performance liquid chromatography quantitation of acetaminophen in biological matrix.

PubMed

Klimek-Turek, A; Sikora, M; Rybicki, M; Dzido, T H

2016-03-04

A new concept of using thin-layer chromatography to sample preparation for the quantitative determination of solute/s followed by instrumental techniques is presented Thin-layer chromatography (TLC) is used to completely separate acetaminophen and its internal standard from other components (matrix) and to form a single spot/zone containing them at the solvent front position (after the final stage of the thin-layer chromatogram development). The location of the analytes and internal standard in the solvent front zone allows their easy extraction followed by quantitation by HPLC. The exctraction procedure of the solute/s and internal standard can proceed from whole solute frontal zone or its part without lowering in accuracy of quantitative analysis. Copyright © 2016 Elsevier B.V. All rights reserved.

Double standards and the international trade of pesticides: the Brazilian case.

PubMed

Porto, Marcelo Firpo; Milanez, Bruno; Soares, Wagner Lopes; Meyer, Armando

2010-01-01

Despite bans on certain pesticides and their replacement by others considered less hazardous, the widespread use of these substances in agriculture continues to threaten the environment and the health of millions of people. This article discusses the current double standard in the international trade of pesticides and focuses on Brazil, one of the main users of pesticides in the world, analyzing the trends in foreign trade (imports and exports) of selected pesticides as a function of changes in legislation in the United States, the European Union, and Brazil from 1989 to 2006. We applied time line analysis to eight organochlorines already banned in Brazil and conducted a case-by-case qualitative and quantitative analysis of nine other pesticides. The results indicate the existence of double standards, as demonstrated by the continued exports to Brazil of some pesticides banned in the United States and Europe.

Alternative Internal Standard Calibration of an Indirect Enzymatic Analytical Method for 2-MCPD Fatty Acid Esters.

PubMed

Koyama, Kazuo; Miyazaki, Kinuko; Abe, Kousuke; Egawa, Yoshitsugu; Fukazawa, Toru; Kitta, Tadashi; Miyashita, Takashi; Nezu, Toru; Nohara, Hidenori; Sano, Takashi; Takahashi, Yukinari; Taniguchi, Hideji; Yada, Hiroshi; Yamazaki, Kumiko; Watanabe, Yomi

2017-06-01

An indirect enzymatic analysis method for the quantification of fatty acid esters of 2-/3-monochloro-1,2-propanediol (2/3-MCPD) and glycidol was developed, using the deuterated internal standard of each free-form component. A statistical method for calibration and quantification of 2-MCPD-d 5 , which is difficult to obtain, is substituted by 3-MCPD-d 5 used for calculation of 3-MCPD. Using data from a previous collaborative study, the current method for the determination of 2-MCPD content using 2-MCPD-d 5 was compared to three alternative new methods using 3-MCPD-d 5 . The regression analysis showed that the alternative methods were unbiased compared to the current method. The relative standard deviation (RSD R ) among the testing laboratories was ≤ 15% and the Horwitz ratio was ≤ 1.0, a satisfactory value.

Advancements in internationally accepted standards for radiation processing

NASA Astrophysics Data System (ADS)

Farrar, Harry; Derr, Donald D.; Vehar, David W.

1993-10-01

Three subcommittees of the American Society for Testing and Materials (ASTM) are developing standards on various aspects of radiation processing. Subcommittee E10.01 "Dosimetry for Radiation Processing" has published 9 standards on how to select and calibrate dosimeters, where to put them, how many to use, and how to use individual types of dosimeter systems. The group is also developing standards on how to use gamma, electron beam, and x-ray facilities for radiation processing, and a standard on how to treat dose uncertainties. Efforts are underway to promote inclusion of these standards into procedures now being developed by government agencies and by international groups such as the United Nations' International Consultative Group on Food Irradiation (ICGFI) in order to harmonize regulations and help avoid trade barriers. Subcommittee F10.10 "Food Processing and Packaging" has completed standards on good irradiation practices for meat and poultry and for fresh fruits, and is developing similar standards for the irradiation of seafood and spices. These food-related standards are based on practices previously published by ICGFI. Subcommittee E10.07 on "Radiation Dosimetry for Radiation Effects on Materials and Devices" principally develops standards for determining doses for radiation hardness testing of electronics. Some, including their standards on the Fricke and TLD dosimetry systems are equally useful in other radiation processing applications.

International standards for programmes of training in intensive care medicine in Europe.

PubMed

2011-03-01

To develop internationally harmonised standards for programmes of training in intensive care medicine (ICM). Standards were developed by using consensus techniques. A nine-member nominal group of European intensive care experts developed a preliminary set of standards. These were revised and refined through a modified Delphi process involving 28 European national coordinators representing national training organisations using a combination of moderated discussion meetings, email, and a Web-based tool for determining the level of agreement with each proposed standard, and whether the standard could be achieved in the respondent's country. The nominal group developed an initial set of 52 possible standards which underwent four iterations to achieve maximal consensus. All national coordinators approved a final set of 29 standards in four domains: training centres, training programmes, selection of trainees, and trainers' profiles. Only three standards were considered immediately achievable by all countries, demonstrating a willingness to aspire to quality rather than merely setting a minimum level. Nine proposed standards which did not achieve full consensus were identified as potential candidates for future review. This preliminary set of clearly defined and agreed standards provides a transparent framework for assuring the quality of training programmes, and a foundation for international harmonisation and quality improvement of training in ICM.

Developing a Standard Set of Patient-Centred Outcomes for Inflammatory Bowel Disease-an International, Cross-disciplinary Consensus.

PubMed

Kim, Andrew H; Roberts, Charlotte; Feagan, Brian G; Banerjee, Rupa; Bemelman, Willem; Bodger, Keith; Derieppe, Marc; Dignass, Axel; Driscoll, Richard; Fitzpatrick, Ray; Gaarentstroom-Lunt, Janette; Higgins, Peter D; Kotze, Paulo Gustavo; Meissner, Jillian; O'Connor, Marian; Ran, Zhi-Hua; Siegel, Corey A; Terry, Helen; van Deen, Welmoed K; van der Woude, C Janneke; Weaver, Alandra; Yang, Suk-Kyun; Sands, Bruce E; Vermeire, Séverine; Travis, Simon Pl

2018-03-28

Success in delivering value-based healthcare involves measuring outcomes that matter most to patients. Our aim was to develop a minimum Standard Set of patient-centred outcome measures for inflammatory bowel disease [IBD], for use in different healthcare settings. An international working group [n = 25] representing patients, patient associations, gastroenterologists, surgeons, specialist nurses, IBD registries and patient-reported outcome measure [PROM] methodologists participated in a series of teleconferences incorporating a modified Delphi process. Systematic review of existing literature, registry data, patient focus groups and open review periods were used to reach consensus on a minimum set of standard outcome measures and risk adjustment variables. Similar methodology has been used in 21 other disease areas [www.ichom.org]. A minimum Standard Set of outcomes was developed for patients [aged ≥16] with IBD. Outcome domains included survival and disease control [survival, disease activity/remission, colorectal cancer, anaemia], disutility of care [treatment-related complications], healthcare utilization [IBD-related admissions, emergency room visits] and patient-reported outcomes [including quality of life, nutritional status and impact of fistulae] measured at baseline and at 6 or 12 month intervals. A single PROM [IBD-Control questionnaire] was recommended in the Standard Set and minimum risk adjustment data collected at baseline and annually were included: demographics, basic clinical information and treatment factors. A Standard Set of outcome measures for IBD has been developed based on evidence, patient input and specialist consensus. It provides an international template for meaningful, comparable and easy-to-interpret measures as a step towards achieving value-based healthcare in IBD.

Calibration and Measurement Uncertainty Estimation of Radiometric Data: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Habte, A.; Sengupta, M.; Reda, I.

2014-11-01

Evaluating the performance of photovoltaic cells, modules, and arrays that form large solar deployments relies on accurate measurements of the available solar resource. Therefore, determining the accuracy of these solar radiation measurements provides a better understanding of investment risks. This paper provides guidelines and recommended procedures for estimating the uncertainty in calibrations and measurements by radiometers using methods that follow the International Bureau of Weights and Measures Guide to the Expression of Uncertainty (GUM). Standardized analysis based on these procedures ensures that the uncertainty quoted is well documented.

Feature extraction in MFL signals of machined defects in steel tubes

NASA Astrophysics Data System (ADS)

Perazzo, R.; Pignotti, A.; Reich, S.; Stickar, P.

2001-04-01

Thirty defects of various shapes were machined on the external and internal wall surfaces of a 177 mm diameter ferromagnetic steel pipe. MFL signals were digitized and recorded at a frequency of 4 Khz. Various magnetizing currents and relative tube-probe velocities of the order of 2m/s were used. The identification of the location of the defect by a principal component/neural network analysis of the signal is shown to be more effective than the standard procedure of classification based on the average signal frequency.

The composition of intern work while on call.

PubMed

Fletcher, Kathlyn E; Visotcky, Alexis M; Slagle, Jason M; Tarima, Sergey; Weinger, Matthew B; Schapira, Marilyn M

2012-11-01

The work of house staff is being increasingly scrutinized as duty hours continue to be restricted. To describe the distribution of work performed by internal medicine interns while on call. Prospective time motion study on general internal medicine wards at a VA hospital affiliated with a tertiary care medical center and internal medicine residency program. Internal medicine interns. Trained observers followed interns during a "call" day. The observers continuously recorded the tasks performed by interns, using customized task analysis software. We measured the amount of time spent on each task. We calculated means and standard deviations for the amount of time spent on six categories of tasks: clinical computer work (e.g., writing orders and notes), non-patient communication, direct patient care (work done at the bedside), downtime, transit and teaching/learning. We also calculated means and standard deviations for time spent on specific tasks within each category. We compared the amount of time spent on the top three categories using analysis of variance. The largest proportion of intern time was spent in clinical computer work (40 %). Thirty percent of time was spent on non-patient communication. Only 12 % of intern time was spent at the bedside. Downtime activities, transit and teaching/learning accounted for 11 %, 5 % and 2 % of intern time, respectively. Our results suggest that during on call periods, relatively small amounts of time are spent on direct patient care and teaching/learning activities. As intern duty hours continue to decrease, attention should be directed towards preserving time with patients and increasing time in education.

Validation of cell-based fluorescence assays: practice guidelines from the ICSH and ICCS - part II - preanalytical issues.

PubMed

Davis, Bruce H; Dasgupta, Amar; Kussick, Steven; Han, Jin-Yeong; Estrellado, Annalee

2013-01-01

Flow cytometry and other technologies of cell-based fluorescence assays are as a matter of good laboratory practice required to validate all assays, which when in clinical practice may pass through regulatory review processes using criteria often defined with a soluble analyte in plasma or serum samples in mind. Recently the U.S. Food and Drug Administration (FDA) has entered into a public dialogue in the U.S. regarding their regulatory interest in laboratory developed tests (LDTs) or so-called "home brew" assays performed in clinical laboratories. The absence of well-defined guidelines for validation of cell-based assays using fluorescence detection has thus become a subject of concern for the International Council for Standardization of Haematology (ICSH) and International Clinical Cytometry Society (ICCS). Accordingly, a group of over 40 international experts in the areas of test development, test validation, and clinical practice of a variety of assay types using flow cytometry and/or morphologic image analysis were invited to develop a set of practical guidelines useful to in vitro diagnostic (IVD) innovators, clinical laboratories, regulatory scientists, and laboratory inspectors. The focus of the group was restricted to fluorescence reporter reagents, although some common principles are shared by immunohistochemistry or immunocytochemistry techniques and noted where appropriate. The work product of this two year effort is the content of this special issue of this journal, which is published as 5 separate articles, this being Validation of Cell-based Fluorescence Assays: Practice Guidelines from the ICSH and ICCS - Part II - Preanalytical issues. © 2013 International Clinical Cytometry Society. © 2013 International Clinical Cytometry Society.

Personalized monitoring of therapeutic salicylic acid in dried blood spots using a three-layer setup and desorption electrospray ionization mass spectrometry.

PubMed

Siebenhaar, Markus; Küllmer, Kai; Fernandes, Nuno Miguel de Barros; Hüllen, Volker; Hopf, Carsten

2015-09-01

Desorption electrospray ionization (DESI) mass spectrometry is an emerging technology for direct therapeutic drug monitoring in dried blood spots (DBS). Current DBS methods require manual application of small molecules as internal standards for absolute drug quantification. With industrial standardization in mind, we superseded the manual addition of standard and built a three-layer setup for robust quantification of salicylic acid directly from DBS. We combined a dioctyl sodium sulfosuccinate weave facilitating sample spreading with a cellulose layer for addition of isotope-labeled salicylic acid as internal standard and a filter paper for analysis of the standard-containing sample by DESI-MS. Using this setup, we developed a quantification method for salicylic acid from whole blood with a validated linear curve range from 10 to 2000 mg/L, a relative standard deviation (RSD%) ≤14%, and determination coefficients of 0.997. The limit of detection (LOD) was 8 mg/L and the lower limit of quantification (LLOQ) was 10 mg/L. Recovery rates in method verification by LC-MS/MS were 97 to 101% for blinded samples. Most importantly, a study in healthy volunteers after administration of a single dose of Aspirin provides evidence to suggest that the three-layer setup may enable individual pharmacokinetic and endpoint testing following blood collection by finger pricking by patients at home. Taken together, our data suggests that DBS-based quantification of drugs by DESI-MS on pre-manufactured three-layer cartridges may be a promising approach for future near-patient therapeutic drug monitoring.

Optimal Hotspots of Dynamic Surfaced-Enhanced Raman Spectroscopy for Drugs Quantitative Detection.

PubMed

Yan, Xiunan; Li, Pan; Zhou, Binbin; Tang, Xianghu; Li, Xiaoyun; Weng, Shizhuang; Yang, Liangbao; Liu, Jinhuai

2017-05-02

Surface-enhanced Raman spectroscopy (SERS) as a powerful qualitative analysis method has been widely applied in many fields. However, SERS for quantitative analysis still suffers from several challenges partially because of the absence of stable and credible analytical strategy. Here, we demonstrate that the optimal hotspots created from dynamic surfaced-enhanced Raman spectroscopy (D-SERS) can be used for quantitative SERS measurements. In situ small-angle X-ray scattering was carried out to in situ real-time monitor the formation of the optimal hotspots, where the optimal hotspots with the most efficient hotspots were generated during the monodisperse Au-sol evaporating process. Importantly, the natural evaporation of Au-sol avoids the nanoparticles instability of salt-induced, and formation of ordered three-dimensional hotspots allows SERS detection with excellent reproducibility. Considering SERS signal variability in the D-SERS process, 4-mercaptopyridine (4-mpy) acted as internal standard to validly correct and improve stability as well as reduce fluctuation of signals. The strongest SERS spectra at the optimal hotspots of D-SERS have been extracted to statistics analysis. By using the SERS signal of 4-mpy as a stable internal calibration standard, the relative SERS intensity of target molecules demonstrated a linear response versus the negative logarithm of concentrations at the point of strongest SERS signals, which illustrates the great potential for quantitative analysis. The public drugs 3,4-methylenedioxymethamphetamine and α-methyltryptamine hydrochloride obtained precise analysis with internal standard D-SERS strategy. As a consequence, one has reason to believe our approach is promising to challenge quantitative problems in conventional SERS analysis.

Inquiry-based laboratory investigations and student performance on standardized tests in biological science

NASA Astrophysics Data System (ADS)

Patke, Usha

Achievement data from the 3rd International Mathematics and Sciences Study and Program for International Student Assessment in science have indicated that Black students from economically disadvantaged families underachieve at alarming rates in comparison to White and economically advantaged peer groups. The study site was a predominately Black, urban school district experiencing underachievement. The purpose of this correlational study was to examine the relationship between students' use of inquiry-based laboratory investigations and their performance on the Biology End of Course Test, as well as to examine the relationship while partialling out the effects of student gender. Constructivist theory formed the theoretical foundation of the study. Students' perceived levels of experience with inquiry-based laboratory investigations were measured using the Laboratory Program Variable Inventory (LPVI) survey. LPVI scores of 256 students were correlated with test scores and were examined by student gender. The Pearson correlation coefficient revealed a small direct correlation between students' experience in inquiry-based laboratory investigation classes and standardized test scores on the Biology EOCT. A partial correlational analysis indicated that the correlation remained after controlling for gender. This study may prompt a change from teacher-centered to student-centered pedagogy at the local site in order to increase academic achievement for all students. The results of this study may also influence administrators and policy makers to initiate local, state, or nationwide curricular development. A change in curriculum may promote social change as students become more competent, and more able, to succeed in life beyond secondary school.

Reference dosimeter system of the iaea

NASA Astrophysics Data System (ADS)

Mehta, Kishor; Girzikowsky, Reinhard

1995-09-01

Quality assurance programmes must be in operation at radiation processing facilities to satisfy national and international Standards. Since dosimetry has a vital function in these QA programmes, it is imperative that the dosimetry systems in use at these facilities are well calibrated with a traceability to a Primary Standard Dosimetry Laboratory. As a service to the Member States, the International Atomic Energy Agency operates the International Dose Assurance Service (IDAS) to assist in this process. The transfer standard dosimetry system that is used for this service is based on ESR spectrometry. The paper describes the activities undertaken at the IAEA Dosimetry Laboratory to establish the QA programme for its reference dosimetry system. There are four key elements of such a programme: quality assurance manual; calibration that is traceable to a Primary Standard Dosimetry Laboratory; a clear and detailed statement of uncertainty in the dose measurement; and, periodic quality audit.

Is Validation Always Valid? Cross-Cultural Complexities of Standard-Based Instruments Migrating out of Their Context

ERIC Educational Resources Information Center

Pastori, Giulia; Pagani, Valentina

2017-01-01

The international application of standard-based measures to assess ECEC quality raises crucial questions concerning the cultural complexities and the problematic validity of instruments migrating out of their cultural cradle; nevertheless the topic has received only marginal attention in the literature. This paper, which aims to address this gap,…

Evidence for the Existing American Nurses Association-Recognized Standardized Nursing Terminologies: A Systematic Review

PubMed Central

Tastan, Sevinc; Linch, Graciele C. F.; Keenan, Gail M.; Stifter, Janet; McKinney, Dawn; Fahey, Linda; Dunn Lopez, Karen; Yao, Yingwei; Wilkie, Diana J.

2014-01-01

Objective To determine the state of the science for the five standardized nursing terminology sets in terms of level of evidence and study focus. Design Systematic Review. Data sources Keyword search of PubMed, CINAHL, and EMBASE databases from 1960s to March 19, 2012 revealed 1,257 publications. Review Methods From abstract review we removed duplicate articles, those not in English or with no identifiable standardized nursing terminology, and those with a low-level of evidence. From full text review of the remaining 312 articles, eight trained raters used a coding system to record standardized nursing terminology names, publication year, country, and study focus. Inter-rater reliability confirmed the level of evidence. We analyzed coded results. Results On average there were 4 studies per year between 1985 and 1995. The yearly number increased to 14 for the decade between 1996–2005, 21 between 2006–2010, and 25 in 2011. Investigators conducted the research in 27 countries. By evidence level for the 312 studies 72.4% were descriptive, 18.9% were observational, and 8.7% were intervention studies. Of the 312 reports, 72.1% focused on North American Nursing Diagnosis-International, Nursing Interventions Classification, Nursing Outcome Classification, or some combination of those three standardized nursing terminologies; 9.6% on Omaha System; 7.1% on International Classification for Nursing Practice; 1.6% on Clinical Care Classification/Home Health Care Classification; 1.6% on Perioperative Nursing Data Set; and 8.0% on two or more standardized nursing terminology sets. There were studies in all 10 foci categories including those focused on concept analysis/classification infrastructure (n = 43), the identification of the standardized nursing terminology concepts applicable to a health setting from registered nurses’ documentation (n = 54), mapping one terminology to another (n = 58), implementation of standardized nursing terminologies into electronic health records (n = 12), and secondary use of electronic health record data (n = 19). Conclusions Findings reveal that the number of standardized nursing terminology publications increased primarily since 2000 with most focusing on North American Nursing Diagnosis-International, Nursing Interventions Classification, and Nursing Outcome Classification. The majority of the studies were descriptive, qualitative, or correlational designs that provide a strong base for understanding the validity and reliability of the concepts underlying the standardized nursing terminologies. There is evidence supporting the successful integration and use in electronic health records for two standardized nursing terminology sets: (1) the North American Nursing Diagnosis-International, Nursing Interventions Classification, and Nursing Outcome Classification set; and (2) the Omaha System set. Researchers, however, should continue to strengthen standardized nursing terminology study designs to promote continuous improvement of the standardized nursing terminologies and use in clinical practice. PMID:24412062

The Influence of Reconstruction Kernel on Bone Mineral and Strength Estimates Using Quantitative Computed Tomography and Finite Element Analysis.

PubMed

Michalski, Andrew S; Edwards, W Brent; Boyd, Steven K

2017-10-17

Quantitative computed tomography has been posed as an alternative imaging modality to investigate osteoporosis. We examined the influence of computed tomography convolution back-projection reconstruction kernels on the analysis of bone quantity and estimated mechanical properties in the proximal femur. Eighteen computed tomography scans of the proximal femur were reconstructed using both a standard smoothing reconstruction kernel and a bone-sharpening reconstruction kernel. Following phantom-based density calibration, we calculated typical bone quantity outcomes of integral volumetric bone mineral density, bone volume, and bone mineral content. Additionally, we performed finite element analysis in a standard sideways fall on the hip loading configuration. Significant differences for all outcome measures, except integral bone volume, were observed between the 2 reconstruction kernels. Volumetric bone mineral density measured using images reconstructed by the standard kernel was significantly lower (6.7%, p < 0.001) when compared with images reconstructed using the bone-sharpening kernel. Furthermore, the whole-bone stiffness and the failure load measured in images reconstructed by the standard kernel were significantly lower (16.5%, p < 0.001, and 18.2%, p < 0.001, respectively) when compared with the image reconstructed by the bone-sharpening kernel. These data suggest that for future quantitative computed tomography studies, a standardized reconstruction kernel will maximize reproducibility, independent of the use of a quantitative calibration phantom. Copyright © 2017 The International Society for Clinical Densitometry. Published by Elsevier Inc. All rights reserved.

Digital Signature Management.

ERIC Educational Resources Information Center

Hassler, Vesna; Biely, Helmut

1999-01-01

Describes the Digital Signature Project that was developed in Austria to establish an infrastructure for applying smart card-based digital signatures in banking and electronic-commerce applications. Discusses the need to conform to international standards, an international certification infrastructure, and security features for a public directory…

The scientifically substantiated art of teaching: A study in the development of standards in the new academic field of neuroeducation (mind, brain, and education science)

NASA Astrophysics Data System (ADS)

Tokuhama-Espinosa, Tracey Noel

Concepts from neuroeducation, commonly referred in the popular press as "brain-based learning," have been applied indiscreetly and inconsistently to classroom teaching practices for many years. While standards exist in neurology, psychology and pedagogy, there are no agreed upon standards in their intersection, neuroeducation, and a formal bridge linking the fields is missing. This study used grounded theory development to determine the parameters of the emerging neuroeducational field based on a meta-analysis of the literature over the past 30 years, which included over 2,200 documents. This research results in a new model for neuroeducation. The design of the new model was followed by a Delphi survey of 20 international experts from six different countries that further refined the model contents over several months of reflection. Finally, the revised model was compared to existing information sources, including popular press, peer review journals, academic publications, teacher training textbooks and the Internet, to determine to what extent standards in neuroeducation are met in the current literature. This study determined that standards in the emerging field, now labeled Mind, Brain, and Education: The Science of Teaching and Learning after the Delphi rounds, are the union of standards in the parent fields of neuroscience, psychology, and education. Additionally, the Delphi expert panel agreed upon the goals of the new discipline, its history, the thought leaders, and a model for judging quality information. The study culminated in a new model of the academic discipline of Mind, Brain, and Education science, which explains the tenets, principles and instructional guidelines supported by the meta-analysis of the literature and the Delphi response.

The Global Neurological Burden of Tuberculosis.

PubMed

Thakur, Kiran; Das, Mitashee; Dooley, Kelly E; Gupta, Amita

2018-04-01

Central nervous system (CNS) involvement of tuberculosis (TB) is the most severe manifestation of TB and accounts for approximately 5 to 10% of all extrapulmonary TB (EPTB) cases and approximately 1% of all TB cases. TB meningitis (TBM) is the most common form of CNS TB, though other forms occur, often in conjunction with TBM, including intracranial tuberculomas, tuberculous brain abscesses, and spinal tubercular arachnoiditis. CNS TB often presents with nonspecific clinical features that mimic symptoms of other neurological conditions, often making diagnosis difficult. Defining neuroimaging characteristics of TBM include thick basal meningeal enhancement, hydrocephalus, and parenchymal infarctions most commonly involving the basal ganglia and internal capsule. Traditional cerebrospinal fluid sample analysis frequently requires lengthy times-to-result and have low sensitivity. Given the pitfalls of conventional CNS TB diagnostic methods, various molecular-based methods, including immunoassays and polymerase chain reaction (PCR)-based assays have emerged as alternative diagnostic tools due to their rapidity, sensitivity, and specificity. Expert panels on TBM have recently emphasized the need for standard research procedures with updated case definitions and standardized study methods, which will hopefully pave the way for more robust multicenter international studies. In this article, we review the epidemiology, diagnosis, molecular factors associated with disease presentation and outcome, and treatment of CNS TB. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Validation of the Portuguese version of the Evidence-Based Practice Questionnaire

PubMed Central

Pereira, Rui Pedro Gomes; Guerra, Ana Cristina Pinheiro; Cardoso, Maria José da Silva Peixoto de Oliveira; dos Santos, Alzira Teresa Vieira Martins Ferreira; de Figueiredo, Maria do Céu Aguiar Barbieri; Carneiro, António Cândido Vaz

2015-01-01

OBJECTIVES: to describe the process of translation and linguistic and cultural validation of the Evidence Based Practice Questionnaire for the Portuguese context: Questionário de Eficácia Clínica e Prática Baseada em Evidências (QECPBE). METHOD: a methodological and cross-sectional study was developed. The translation and back translation was performed according to traditional standards. Principal Components Analysis with orthogonal rotation according to the Varimax method was used to verify the QECPBE's psychometric characteristics, followed by confirmatory factor analysis. Internal consistency was determined by Cronbach's alpha. Data were collected between December 2013 and February 2014. RESULTS: 358 nurses delivering care in a hospital facility in North of Portugal participated in the study. QECPBE contains 20 items and three subscales: Practice (α=0.74); Attitudes (α=0.75); Knowledge/Skills and Competencies (α=0.95), presenting an overall internal consistency of α=0.74. The tested model explained 55.86% of the variance and presented good fit: χ2(167)=520.009; p = 0.0001; χ2df=3.114; CFI=0.908; GFI=0.865; PCFI=0.798; PGFI=0.678; RMSEA=0.077 (CI90%=0.07-0.08). CONCLUSION: confirmatory factor analysis revealed the questionnaire is valid and appropriate to be used in the studied context. PMID:26039307

The "Glocalization" of Medical School Accreditation: Case Studies From Taiwan, South Korea, and Japan.

PubMed

Ho, Ming-Jung; Abbas, Joan; Ahn, Ducksun; Lai, Chi-Wan; Nara, Nobuo; Shaw, Kevin

2017-12-01

In an age of globalized medical education, medical school accreditation has been hailed as an approach to external quality assurance. However, accreditation standards can vary widely across national contexts. To achieve recognition by the World Federation for Medical Education (WFME), national accrediting bodies must develop standards suitable for both local contexts and international recognition. This study framed this issue in terms of "glocalization" and aimed to shine light on this complicated multistakeholder process by exploring accreditation in Taiwan, South Korea, and Japan. This study employed a comparative case-study design, examining the national standards that three accreditation bodies in East Asia developed using international reference standards. In 2015-2016, the authors conducted document analysis of the English versions of the standards to identify the differences between the national and international reference standards as well as how and why external standards were adapted. Each country's accreditation body sought to balance local needs with global demands. Each used external standards as a template (e.g., Liaison Committee on Medical Education, General Medical Council, or WFME standards) and either revised (Taiwan, South Korea) or annotated (Japan) the standards to fit the local context. Four categories of differences emerged to account for how and why national standards departed from external references: structural, regulatory, developmental, and aspirational. These countries' glocalization of medical accreditation standards serve as examples for others seeking to bring their accreditation practices in line with global standards while ensuring that local values and societal needs are given adequate consideration.

Qualitative Analysis on Stage: Making the Research Process More Public.

ERIC Educational Resources Information Center

Anfara, Vincent A., Jr.; Brown, Kathleen M.

The increased use of qualitative research methods has spurred interest in developing formal standards for assessing its validity. These standards, however, fall short if they do not include public disclosure of methods as a criterion. The researcher must be accountable in documenting the actions associated with establishing internal validity…

Applying Concepts of Critical Pedagogy to Qatar's Educational Reform

ERIC Educational Resources Information Center

Romanowski, Michael H.; Amatullah, Tasneem

2016-01-01

Qatar is in the midst of a systemic education reform, Education For a New Era, steered by RAND's (a nonprofit research organization) analysis and report of Qatar's Educational system. Driven by a neoliberal agenda, the reform includes international curricula, curriculum standards, teacher licensure, and professional standards for school leaders…

Development of visual peak selection system based on multi-ISs normalization algorithm to apply to methamphetamine impurity profiling.

PubMed

Lee, Hun Joo; Han, Eunyoung; Lee, Jaesin; Chung, Heesun; Min, Sung-Gi

2016-11-01

The aim of this study is to improve resolution of impurity peaks using a newly devised normalization algorithm for multi-internal standards (ISs) and to describe a visual peak selection system (VPSS) for efficient support of impurity profiling. Drug trafficking routes, location of manufacture, or synthetic route can be identified from impurities in seized drugs. In the analysis of impurities, different chromatogram profiles are obtained from gas chromatography and used to examine similarities between drug samples. The data processing method using relative retention time (RRT) calculated by a single internal standard is not preferred when many internal standards are used and many chromatographic peaks present because of the risk of overlapping between peaks and difficulty in classifying impurities. In this study, impurities in methamphetamine (MA) were extracted by liquid-liquid extraction (LLE) method using ethylacetate containing 4 internal standards and analyzed by gas chromatography-flame ionization detection (GC-FID). The newly developed VPSS consists of an input module, a conversion module, and a detection module. The input module imports chromatograms collected from GC and performs preprocessing, which is converted with a normalization algorithm in the conversion module, and finally the detection module detects the impurities in MA samples using a visualized zoning user interface. The normalization algorithm in the conversion module was used to convert the raw data from GC-FID. The VPSS with the built-in normalization algorithm can effectively detect different impurities in samples even in complex matrices and has high resolution keeping the time sequence of chromatographic peaks the same as that of the RRT method. The system can widen a full range of chromatograms so that the peaks of impurities were better aligned for easy separation and classification. The resolution, accuracy, and speed of impurity profiling showed remarkable improvement. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Does science speak clearly and fairly in trade and food safety disputes? The search for an optimal response of WTO adjudication to problematic international standard-making.

PubMed

Ni, Kuei-Jung

2013-01-01

Most international health-related standards are voluntary per se. However, the incorporation of international standard-making into WTO agreements like the SPS Agreement has drastically changed the status and effectiveness of the standards. WTO members are urged to follow international standards, even when not required to comply fully with them. Indeed, such standards have attained great influence in the trade system. Yet evidence shows that the credibility of the allegedly scientific approach of these international standard-setting institutions, especially the Codex Alimentarius Commission (Codex) governing food safety standards, has been eroded and diluted by industrial and political influences. Its decision-making is no longer based on consensus, but voting. The adoption of new safety limits for the veterinary drug ractopamine in 2012, by a very close vote, is simply another instance of the problematic operations of the Codex. These dynamics have led skeptics to question the legitimacy of the standard setting body and to propose solutions to rectify the situation. Prior WTO rulings have yet to pay attention to the defect in the decision-making processes of the Codex. Nevertheless, the recent Appellate Body decision on Hormones II is indicative of a deferential approach to national measures that are distinct from Codex formulas. The ruling also rejects the reliance on those experts who authored the Codex standards to assess new measures of the European Community. This approach provides an opportunity to contemplate what the proper relationship between the WTO and Codex ought to be. Through a critical review of WTO rulings and academic proposals, this article aims to analyze how the WTO ought to define such interactions and respond to the politicized standard-making process in an optimal manner. This article argues that building a more systematic approach and normative basis for WTO judicial review of standard-setting decisions and the selection of technical experts would be instrumental to strengthening the mutual supports between the WTO and international standard-setting organizations, and may help avoid the introduction of a prejudice toward a justified science finding.

Modeling Payload Stowage Impacts on Fire Risks On-Board the International Space Station

NASA Technical Reports Server (NTRS)

Anton, Kellie e.; Brown, Patrick F.

2010-01-01

The purpose of this presentation is to determine the risks of fire on-board the ISS due to non-standard stowage. ISS stowage is constantly being reexamined for optimality. Non-standard stowage involves stowing items outside of rack drawers, and fire risk is a key concern and is heavily mitigated. A Methodology is needed to account for fire risk due to non-standard stowage to capture the risk. The contents include: 1) Fire Risk Background; 2) General Assumptions; 3) Modeling Techniques; 4) Event Sequence Diagram (ESD); 5) Qualitative Fire Analysis; 6) Sample Qualitative Results for Fire Risk; 7) Qualitative Stowage Analysis; 8) Sample Qualitative Results for Non-Standard Stowage; and 9) Quantitative Analysis Basic Event Data.

Preliminary report on the International Conference for the Development of Standards for the Treatment of Anorectal Malformations.

PubMed

Holschneider, Alexander; Hutson, John; Peña, Albert; Beket, Elhamy; Chatterjee, Subir; Coran, Arnold; Davies, Michael; Georgeson, Keith; Grosfeld, Jay; Gupta, Devendra; Iwai, Naomi; Kluth, Dieter; Martucciello, Giuseppe; Moore, Samuel; Rintala, Risto; Smith, E Durham; Sripathi, D V; Stephens, Douglas; Sen, Sudipta; Ure, Benno; Grasshoff, Sabine; Boemers, Thomas; Murphy, Feilin; Söylet, Yunus; Dübbers, Martin; Kunst, Marc

2005-10-01

Anorectal malformations (ARM) are common congenital anomalies seen throughout the world. Comparison of outcome data has been hindered because of confusion related to classification and assessment systems. The goals of the Krinkenbeck Conference on ARM was to develop standards for an International Classification of ARM based on a modification of fistula type and adding rare and regional variants, and design a system for comparable follow up studies. Lesions were classified into major clinical groups based on the fistula location (perineal, recto-urethral, recto-vesical, vestibular), cloacal lesions, those with no fistula and anal stenosis. Rare and regional variants included pouch colon, rectal atresia or stenosis, rectovaginal fistula, H-fistula and others. Groups would be analyzed according to the type of procedure performed stratified for confounding associated conditions such as sacral anomalies and tethered cord. A standard method for postoperative assessment of continence was determined. A new International diagnostic classification system, operative groupings and a method of postoperative assessment of continence was developed by consensus of a large contingent of participants experienced in the management of patients with ARM. These methods should allow for a common standardization of diagnosis and comparing postoperative results.

Standardization of Laser Methods and Techniques for Vibration Measurements and Calibrations

NASA Astrophysics Data System (ADS)

von Martens, Hans-Jürgen

2010-05-01

The realization and dissemination of the SI units of motion quantities (vibration and shock) have been based on laser interferometer methods specified in international documentary standards. New and refined laser methods and techniques developed by national metrology institutes and by leading manufacturers in the past two decades have been swiftly specified as standard methods for inclusion into in the series ISO 16063 of international documentary standards. A survey of ISO Standards for the calibration of vibration and shock transducers demonstrates the extended ranges and improved accuracy (measurement uncertainty) of laser methods and techniques for vibration and shock measurements and calibrations. The first standard for the calibration of laser vibrometers by laser interferometry or by a reference accelerometer calibrated by laser interferometry (ISO 16063-41) is on the stage of a Draft International Standard (DIS) and may be issued by the end of 2010. The standard methods with refined techniques proved to achieve wider measurement ranges and smaller measurement uncertainties than that specified in the ISO Standards. The applicability of different standardized interferometer methods to vibrations at high frequencies was recently demonstrated up to 347 kHz (acceleration amplitudes up to 350 km/s2). The relative deviations between the amplitude measurement results of the different interferometer methods that were applied simultaneously, differed by less than 1% in all cases.

Density-functional theory for internal magnetic fields

NASA Astrophysics Data System (ADS)

Tellgren, Erik I.

2018-01-01

A density-functional theory is developed based on the Maxwell-Schrödinger equation with an internal magnetic field in addition to the external electromagnetic potentials. The basic variables of this theory are the electron density and the total magnetic field, which can equivalently be represented as a physical current density. Hence, the theory can be regarded as a physical current density-functional theory and an alternative to the paramagnetic current density-functional theory due to Vignale and Rasolt. The energy functional has strong enough convexity properties to allow a formulation that generalizes Lieb's convex analysis formulation of standard density-functional theory. Several variational principles as well as a Hohenberg-Kohn-like mapping between potentials and ground-state densities follow from the underlying convex structure. Moreover, the energy functional can be regarded as the result of a standard approximation technique (Moreau-Yosida regularization) applied to the conventional Schrödinger ground-state energy, which imposes limits on the maximum curvature of the energy (with respect to the magnetic field) and enables construction of a (Fréchet) differentiable universal density functional.

Spanish adaptation of the revised Amyotrophic Lateral Sclerosis Functional Rating Scale (ALSFRS-R).

PubMed

Campos, Teresa Salas; Rodríguez-Santos, Francisco; Esteban, Jesus; Vázquez, Pilar Cordero; Mora Pardina, Jesus S; Carmona, Alejandra Cano

2010-10-01

ALSFRS-R is a tool designed to measure disease progress in ALS patients. It consists of 12 items grouped into four functions designed to assess disabilities according to the Activities of daily living (ADL). Our objective was to validate the Spanish version of ALSFRS-R based on the original version. Four examiners assessed 73 ALS patients, applying the ALSFRS-R, ALSAQ-40 and the respiratory function variable assessed by the SRI scale, which measures respiratory insufficiency. Internal consistency and test-retest correlations were measured using Cronbach's alpha and Spearman's Rho tests. Factor analysis was performed by applying Varimax rotation and Kaiser standardization. Validity was analysed based on correlations between items in the ALSFRS-R scales and equivalents in the ALSAQ-40 and SRI questionnaires. The results showed high internal consistency (0.77-0.95) and a good test-retest correlation (0.80-0.95). Factor analysis showed a 73.3% principal component contribution; the weight of each item regarding their corresponding factors was 0.7-0.9. High correlations were observed (rs >0.60) between corresponding factors of ALSFRS-R/ALSAQ-40 and ALSFRS-R/SRI. We conclude that the version obtained from the ALSFRS-R maintains the internal consistency and validity of the construct of the original scale. The Spanish version of ALSFRS-R is available for readers at http://www.fundela.es/verOtras.php.

Small satellites and space debris issues

NASA Astrophysics Data System (ADS)

Yakovlev, M.; Kulik, S.; Agapov, V.

2001-10-01

The objective of this report is the analysis of the tendencies in designing of small satellites (SS) and the effect of small satellites on space debris population. It is shown that SS to include nano- and pico-satellites should be considered as a particularly dangerous source of space debris when elaborating international standards and legal documents concerning the space debris problem, in particular "International Space Debris Mitigation Standard". These issues are in accordance with the IADC goals in its main activity areas and should be carefully considered within the IADC framework.

International Standards for Neurological Classification of Spinal Cord Injury: cases with classification challenges.

PubMed

Kirshblum, S C; Biering-Sorensen, F; Betz, R; Burns, S; Donovan, W; Graves, D E; Johansen, M; Jones, L; Mulcahey, M J; Rodriguez, G M; Schmidt-Read, M; Steeves, J D; Tansey, K; Waring, W

2014-03-01

The International Standards for the Neurological Classification of Spinal Cord Injury (ISNCSCI) is routinely used to determine the levels of injury and to classify the severity of the injury. Questions are often posed to the International Standards Committee of the American Spinal Injury Association regarding the classification. The committee felt that disseminating some of the challenging questions posed, as well as the responses, would be of benefit for professionals utilizing the ISNCSCI. Case scenarios that were submitted to the committee are presented with the responses as well as the thought processes considered by the committee members. The importance of this documentation is to clarify some points as well as update the SCI community regarding possible revisions that will be needed in the future based upon some rules that require clarification.

Hydrogen Fuel Quality

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rockward, Tommy

2012-07-16

For the past 6 years, open discussions and/or meetings have been held and are still on-going with OEM, Hydrogen Suppliers, other test facilities from the North America Team and International collaborators regarding experimental results, fuel clean-up cost, modeling, and analytical techniques to help determine levels of constituents for the development of an international standard for hydrogen fuel quality (ISO TC197 WG-12). Significant progress has been made. The process for the fuel standard is entering final stages as a result of the technical accomplishments. The objectives are to: (1) Determine the allowable levels of hydrogen fuel contaminants in support of themore » development of science-based international standards for hydrogen fuel quality (ISO TC197 WG-12); and (2) Validate the ASTM test method for determining low levels of non-hydrogen constituents.« less

Collaborative study for the establishment of the 2(nd) International Standard for Bleomycin Complex A2/B2.

PubMed

Jorajuria, S; Raphalen, C; Dujardin, V; Daas, A

2015-01-01

Organization (WHO) International Standard (IS) for bleomycin complex A2/B2. Eight laboratories from different countries participated. Potencies of the candidate material were estimated by microbiological assays with sensitive micro-organisms. To ensure continuity between consecutive batches, the 1(st) IS for bleomycin complex A2/B2 was used as a reference. Based on the results of the study, the 2(nd) IS for bleomycin complex A2/B2 was adopted at the meeting of the WHO Expert Committee for Biological Standardization (ECBS) in 2014 with an assigned potency of 12 500 International Units (IU) per vial. The 2(nd) IS for bleomycin complex A2/B2 is available from the European Directorate for the Quality of Medicines & HealthCare (EDQM).

Solution-based calibration strategy for laser ablation-inductively coupled plasma-mass spectrometry using desolvating nebulizer system

NASA Astrophysics Data System (ADS)

Zhang, Guoxia; Li, Qing; Zhu, Yan; Wang, Zheng

2018-07-01

An additional quantification strategy using a desolvating nebulizer system (DNS) for solution-based calibration was developed. For quantitative analysis, laser ablation (LA) and DNS-generated aerosols were coupled using a "Y" connector and introduced into the inductively coupled plasma (ICP). These aerosols were also observed by scanning electron microscopy following collection on a silicon chip. Internal standards (108Ag, 64Cu, 89Y) were used to correct for the different aerosol transport efficiencies between the DNS and LA. The correlation coefficients of the calibration curves for all elements ranged from 0.9986 to 0.9999. Standard reference materials (NIST 610-616 and GBW08407-08411) were used to demonstrate the accuracy and precision of the method. The results were in good agreement with certified values, and the relative standard deviation (RSD) of most elements was <3%. The limits of detection (LODs) for 50Cr, 55Mn, 59Co, 60Ni, 66Zn, 89Y, 110Cd, 139La, 140Ce, 146Nd, 147Sm, 157Gd, 163Dy, 166Er, and 208Pb were 23, 3, 3, 19, 31, 4, 12, 0.4, 0.9, 0.1, 0.2, 2, 0.3, 0.4, and 21 ng/g, respectively, which were significantly better than those obtained by other methods. Further, this approach was applied for the analysis of multiple elements in biological tissues, and the results were in good agreement with those obtained using solution-based inductively coupled plasma-mass spectrometry (ICP-MS).

The NOAA IOOS Data Integration Framework: Initial Implementation Report

DTIC Science & Technology

2008-09-01

based services (http://www.opengeospatial.org/); NOAA is a Principal Member. Figure 2: Specialization of XML for in situ data To standardize...1 OGC is a non-profit, international, voluntary consensus organization that develops standards for geospatial and location

International Review of the Development and Implementation of Energy Efficiency Standards and Labeling Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Nan; Zheng, Nina; Fridley, David

2012-02-28

Appliance energy efficiency standards and labeling (S&L) programs have been important policy tools for regulating the efficiency of energy-using products for over 40 years and continue to expand in terms of geographic and product coverage. The most common S&L programs include mandatory minimum energy performance standards (MEPS) that seek to push the market for efficient products, and energy information and endorsement labels that seek to pull the market. This study seeks to review and compare some of the earliest and most well-developed S&L programs in three countries and one region: the U.S. MEPS and ENERGY STAR, Australia MEPS and Energymore » Label, European Union MEPS and Ecodesign requirements and Energy Label and Japanese Top Runner programs. For each program, key elements of S&L programs are evaluated and comparative analyses across the programs undertaken to identify best practice examples of individual elements as well as cross-cutting factors for success and lessons learned in international S&L program development and implementation. The international review and comparative analysis identified several overarching themes and highlighted some common factors behind successful program elements. First, standard-setting and programmatic implementation can benefit significantly from a legal framework that stipulates a specific timeline or schedule for standard-setting and revision, product coverage and legal sanctions for non-compliance. Second, the different MEPS programs revealed similarities in targeting efficiency gains that are technically feasible and economically justified as the principle for choosing a standard level, in many cases at a level that no product on the current market could reach. Third, detailed survey data such as the U.S. Residential Energy Consumption Survey (RECS) and rigorous analyses provide a strong foundation for standard-setting while incorporating the participation of different groups of stakeholders further strengthen the process. Fourth, sufficient program resources for program implementation and evaluation are critical to the effectiveness of standards and labeling programs and cost-sharing between national and local governments can help ensure adequate resources and uniform implementation. Lastly, check-testing and punitive measures are important forms of enforcement while the cancellation of registration or product sales-based fines have also proven effective in reducing non-compliance. The international comparative analysis also revealed the differing degree to which the level of government decentralization has influenced S&L programs and while no single country has best practices in all elements of standards and labeling development and implementation, national examples of best practices for specific elements do exist. For example, the U.S. has exemplified the use of rigorous analyses for standard-setting and robust data source with the RECS database while Japan's Top Runner standard-setting principle has motivated manufacturers to exceed targets. In terms of standards implementation and enforcement, Australia has demonstrated success with enforcement given its long history of check-testing and enforcement initiatives while mandatory information-sharing between EU jurisdictions on compliance results is another important enforcement mechanism. These examples show that it is important to evaluate not only the drivers of different paths of standards and labeling development, but also the country-specific context for best practice examples in order to understand how and why certain elements of specific S&L programs have been effective.« less

Integrated Procedures for Flight and Ground Operations Using International Standards

NASA Technical Reports Server (NTRS)

Ingalls, John

2011-01-01

Imagine astronauts using the same Interactive Electronic Technical Manuals (IETM's) as the ground personnel who assemble or maintain their flight hardware, and having all of that data interoperable with design, logistics, reliability analysis, and training. Modern international standards and their corresponding COTS tools already used in other industries provide a good foundation for streamlined technical publications in the space industry. These standards cover everything from data exchange to product breakdown structure to business rules flexibility. Full Product Lifecycle Support (PLCS) is supported. The concept is to organize, build once, reuse many ways, and integrate. This should apply to all future and some current launch vehicles, payloads, space stations/habitats, spacecraft, facilities, support equipment, and retrieval ships.

22 CFR 226.45 - Cost and price analysis.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Cost and price analysis. 226.45 Section 226.45 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT ADMINISTRATION OF ASSISTANCE AWARDS TO U.S. NON-GOVERNMENTAL ORGANIZATIONS Post-award Requirements Procurement Standards § 226.45 Cost and price analysis. Some...

Clinical trial regulation in Argentina: overview and analysis of regulatory framework, use of existing tools, and researchers' perspectives to identify potential barriers.

PubMed

White, Lauren; Ortiz, Zulma; Cuervo, Luis G; Reveiz, Ludovic

2011-11-01

To review and analyze the regulatory framework of clinical trial registration, use of existing tools (publicly accessible national/international registration databases), and users' perspectives to identify possible barriers to registration compliance by sponsors and researchers in Argentina. Internationally registered trials recruiting patients in Argentina were found through clincialtrials.gov and the International Clinical Trial Registration Platform (ICTRP) and compared with publically available clinical trials registered through the National Administration of Drugs, Foods, and Medical Devices (ANMAT). A questionnaire addressing hypothesized attitudinal, knowledge-related, idiomatic, technical, economic, and regulatory barriers that could discourage or impede registration of clinical trials was developed, and semi-structured, in-depth interviews were conducted with a purposively selected sample of researchers (investigators, sponsors, and monitors) in Argentina. A response rate of 74.3% (n = 29) was achieved, and 27 interviews were ultimately used for analysis. Results suggested that the high proportion of foreign-sponsored or multinational trials (64.8% of all protocols approved by ANMAT from 1994-2006) may contribute to a communication gap between locally based investigators and foreign-based administrative officials. A lack of knowledge about available international registration tools and limited awareness of the importance of registration were also identified as limiting factors for local investigators and sponsors. To increase compliance and promote clinical trial registration in Argentina, national health authorities, sponsors, and local investigators could take the following steps: implement a grassroots educational campaign to improve clinical trial regulation, support local investigator-sponsor-initiated clinical trials, and/or encourage local and regional scientific journal compliance with standards from the International Committee of Medical Journal Editors (ICMJE) and/or the World Association of Medical Editors (WAME).

Gravimetric Analysis of Particulate Matter using Air Samplers Housing Internal Filtration Capsules.

PubMed

O'Connor, Sean; O'Connor, Paula Fey; Feng, H Amy; Ashley, Kevin

2014-10-01

An evaluation was carried out to investigate the suitability of polyvinyl chloride (PVC) internal capsules, housed within air sampling devices, for gravimetric analysis of airborne particles collected in workplaces. Experiments were carried out using blank PVC capsules and PVC capsules spiked with 0,1 - 4 mg of National Institute of Standards and Technology Standard Reference Material ® (NIST SRM) 1648 (Urban Particulate Matter) and Arizona Road Dust (Air Cleaner Test Dust). The capsules were housed within plastic closed-face cassette samplers (CFCs). A method detection limit (MDL) of 0,075 mg per sample was estimated. Precision S r at 0,5 - 4 mg per sample was 0,031 and the estimated bias was 0,058. Weight stability over 28 days was verified for both blanks and spiked capsules. Independent laboratory testing on blanks and field samples verified long-term weight stability as well as sampling and analysis precision and bias estimates. An overall precision estimate Ŝ rt of 0,059 was obtained. An accuracy measure of ±15,5% was found for the gravimetric method using PVC internal capsules.

Gravimetric Analysis of Particulate Matter using Air Samplers Housing Internal Filtration Capsules

PubMed Central

O'Connor, Sean; O'Connor, Paula Fey; Feng, H. Amy

2015-01-01

Summary An evaluation was carried out to investigate the suitability of polyvinyl chloride (PVC) internal capsules, housed within air sampling devices, for gravimetric analysis of airborne particles collected in workplaces. Experiments were carried out using blank PVC capsules and PVC capsules spiked with 0,1 – 4 mg of National Institute of Standards and Technology Standard Reference Material® (NIST SRM) 1648 (Urban Particulate Matter) and Arizona Road Dust (Air Cleaner Test Dust). The capsules were housed within plastic closed-face cassette samplers (CFCs). A method detection limit (MDL) of 0,075 mg per sample was estimated. Precision Sr at 0,5 - 4 mg per sample was 0,031 and the estimated bias was 0,058. Weight stability over 28 days was verified for both blanks and spiked capsules. Independent laboratory testing on blanks and field samples verified long-term weight stability as well as sampling and analysis precision and bias estimates. An overall precision estimate Ŝrt of 0,059 was obtained. An accuracy measure of ±15,5% was found for the gravimetric method using PVC internal capsules. PMID:26435581

Acid-Soluble Internal Capsules for Closed-Face Cassette Elemental Sampling and Analysis of Workplace Air

PubMed Central

Harper, Martin; Ashley, Kevin

2013-01-01

Airborne particles that are collected using closed-face filter cassettes (CFCs), which are used widely in the sampling of workplace aerosols, can deposit in places other than on the filter and thereby may not be included in the ensuing analysis. A technique for ensuring that internal non-filter deposits are included in the analysis is to collect airborne particles within an acid-soluble internal capsule that, following sampling, can be dissolved along with the filter for subsequent elemental analysis. An interlaboratory study (ILS) was carried out to evaluate the use of cellulosic CFC capsule inserts for their suitability in the determination of trace elements in airborne samples. The ILS was performed in accordance with an applicable ASTM International standard practice, ASTM E691, which describes statistical procedures for investigating interlaboratory precision. Performance evaluation materials consisted of prototype cellulose acetate capsules attached to mixed-cellulose ester filters. Batches of capsules were dosed with Pb-containing materials (standard aqueous solutions, and certified reference material soil and paint). Also, aerosol samples containing nine target analyte elements (As, Cd, Co, Cr, Cu, Fe, Pb, Mn, and Ni) were generated using a multiport sampler; various concentrations and sampling times were employed to yield samples fortified at desired loading levels. Triplicates of spiked capsules at three different loadings were conveyed to each volunteer laboratory; loading levels were unknown to the participants. The laboratories were asked to prepare the samples by acid dissolution and to analyze aliquots of extracted samples by atomic spectrometry in accordance with applicable ASTM International Standards. Participants were asked to report their results in units of μg of each target element per sample. For the elements investigated, interlaboratory precision and recovery estimates from the participating laboratories demonstrated the utility of the cellulosic capsule inserts for the measurement of sampled trace elements. PMID:23548078

Challenges to developing countries after joining WTO: risk assessment of chemicals in food.

PubMed

Chen, Junshi

2004-05-20

FAO/WHO encourages member countries to develop national food control measures based on risk assessment in order to assure proper protection level to consumers and facilitate fair trade. This is particularly important for developing countries as WTO members because it is clearly stated in the Sanitary and Phytosanitary Measures (SPS) Agreement that: (a) SPS measures should be based on risk assessment techniques developed by relevant international organizations; and (b) Codex standards which is based on risk assessment are regarded as the international norm in trade dispute settlement. When conducting risk assessment on food chemicals (including additives and contaminants) in developing countries, in most cases it is not necessary to conduct their own hazard characterization because the ADIs or PTWIs of food chemicals developed by international expert groups (e.g. JECFA) are universally applicable and also developing countries do not have the resources to repeat those expensive toxicological studies. On the other hand, it is necessary to conduct exposure assessment in developing countries because exposure to food chemicals varies from country to country. This is not only crucial in setting national standards, but also very important for developing countries to participate in the process of developing Codex standards. In addition to food standard development, risk assessment is also useful in setting up priorities in imported food inspection and evaluating the success of various food safety control measures.

Comparison of gas chromatography-combustion-mass spectrometry and gas chromatography-flame ionization detector for the determination of fatty acid methyl esters in biodiesel without specific standards.

PubMed

Sobrado, Laura Alonso; Freije-Carrelo, Laura; Moldovan, Mariella; Encinar, Jorge Ruiz; Alonso, J Ignacio García

2016-07-29

GC-FID has been effectively used as a universal quantification technique for volatile organic compounds for a long time. In most cases, the use of the ECN allows for quantification by GC-FID without external calibration using only the response of a single internal standard. In this paper we compare the performance characteristics of GC-FID with those of post-column (13)C Isotope Dilution GC-Combustion-MS for the absolute quantification of organic compounds without the need for individual standards. For this comparison we have selected the quantification of FAMEs in biodiesel. The selection of the right internal standard was critical for GC-FID even when ECN were considered. On the other hand, the nature of the internal standard was not relevant when GC-Combustion-MS was employed. The proposed method was validated with the analysis of the certified reference material SRM 2772 and comparative data was obtained on real biodiesel samples. The analysis of the SRM 2772 biodiesel provided recoveries in the range 100.6-103.5% and 96.4-103.6% for GC-combustion-MS and GC-FID, respectively. The detection limit for GC-combustion-MS was found to be 4.2ng compound/g of injected sample. In conclusion, the quantitative performance of GC-Combustion-MS compared satisfactorily with that of GC-FID constituting a viable alternative for the quantification of organic compounds without the need for individual standards. Copyright © 2016 Elsevier B.V. All rights reserved.

Interpreting international governance standards for health IT use within general medical practice.

PubMed

Mahncke, Rachel J; Williams, Patricia A H

2014-01-01

General practices in Australia recognise the importance of comprehensive protective security measures. Some elements of information security governance are incorporated into recommended standards, however the governance component of information security is still insufficiently addressed in practice. The International Organistion for Standardisation (ISO) released a new global standard in May 2013 entitled, ISO/IEC 27014:2013 Information technology - Security techniques - Governance of information security. This standard, applicable to organisations of all sizes, offers a framework against which to assess and implement the governance components of information security. The standard demonstrates the relationship between governance and the management of information security, provides strategic principles and processes, and forms the basis for establishing a positive information security culture. An analysis interpretation of this standard for use in Australian general practice was performed. This work is unique as such interpretation for the Australian healthcare environment has not been undertaken before. It demonstrates an application of the standard at a strategic level to inform existing development of an information security governance framework.

[Breast cancer screening process indicators in Mexico: a case study].

PubMed

Uscanga-Sánchez, Santos; Torres-Mejía, Gabriela; Ángeles-Llerenas, Angélica; Domínguez-Malpica, Raúl; Lazcano-Ponce, Eduardo

2014-01-01

To identify, measure and compare the performance indicators of productivity, effective access and quality service for the early detection breast cancer program in Mexico. By means of a study case based on the 2011 Women Cancer Information System (SICAM), the indicators were measured and compared with the Mexican official standard NOM-041-SSA2-2011 and international standards. The analysis showed insufficient installed capacity (37%), low coverage in screening (15%), diagnostic evaluation (16%), biopsy (44%) and treatment (57%), and very low effectiveness in confirmed cases by the total number of screening mammograms performed (0.04%). There was no information available, from SICAM, to estimate the rest of the indicators proposed. Efficient health information systems are required in order to monitor indicators and generate performance observatories of screening programs.

Quantitative analysis of amygdalin and prunasin in Prunus serotina Ehrh. using (1) H-NMR spectroscopy.

PubMed

Santos Pimenta, Lúcia P; Schilthuizen, Menno; Verpoorte, Robert; Choi, Young Hae

2014-01-01

Prunus serotina is native to North America but has been invasively introduced in Europe since the seventeenth century. This plant contains cyanogenic glycosides that are believed to be related to its success as an invasive plant. For these compounds, chromatographic- or spectrometric-based (targeting on HCN hydrolysis) methods of analysis have been employed so far. However, the conventional methods require tedious preparation steps and a long measuring time. To develop a fast and simple method to quantify the cyanogenic glycosides, amygdalin and prunasin in dried Prunus serotina leaves without any pre-purification steps using (1) H-NMR spectroscopy. Extracts of Prunus serotina leaves using CH3 OH-d4 and KH2 PO4 buffer in D2 O (1:1) were quantitatively analysed for amygdalin and prunasin using (1) H-NMR spectroscopy. Different internal standards were evaluated for accuracy and stability. The purity of quantitated (1) H-NMR signals was evaluated using several two-dimensional NMR experiments. Trimethylsilylpropionic acid sodium salt-d4 proved most suitable as the internal standard for quantitative (1) H-NMR analysis. Two-dimensional J-resolved NMR was shown to be a useful tool to confirm the structures and to check for possible signal overlapping with the target signals for the quantitation. Twenty-two samples of P. serotina were subsequently quantitatively analysed for the cyanogenic glycosides prunasin and amygdalin. The NMR method offers a fast, high-throughput analysis of cyanogenic glycosides in dried leaves permitting simultaneous quantification and identification of prunasin and amygdalin in Prunus serotina. Copyright © 2013 John Wiley & Sons, Ltd.

[Incorporation of the Hazard Analysis and Critical Control Point system (HACCP) in food legislation].

PubMed

Castellanos Rey, Liliana C; Villamil Jiménez, Luis C; Romero Prada, Jaime R

2004-01-01

The Hazard Analysis and Critical Control Point system (HACCP), recommended by different international organizations as the Codex Alimentarius Commission, the World Trade Organization (WTO), the International Office of Epizootics (OIE) and the International Convention for Vegetables Protection (ICPV) amongst others, contributes to ensuring the innocuity of food along the agro-alimentary chain and requires of Good Manufacturing Practices (GMP) for its implementation, GMP's which are legislated in most countries. Since 1997, Colombia has set rules and legislation for application of HACCP system in agreement with international standards. This paper discusses the potential and difficulties of the legislation enforcement and suggests some policy implications towards food safety.

Performance of International Space Station Alpha Trace Contaminant Control Systems

NASA Technical Reports Server (NTRS)

Perry, J. L.

2016-01-01

The analysis presented herein was conducted during the early transitional period between the Space Station Freedom and the International Space Station programs as part of an effort to evaluate key design specifications and standards used by the United States and Russia. The analysis was originally documented under NASA cover letter ED62(36-94) dated August 16, 1994. The analysis was revised and rereleased under NASA cover letter ED62(51-94) dated November 14, 1994. These cover letters are provided here to guide programmatic context for the reader.

Developed-developing country partnerships: benefits to developed countries?

PubMed

Syed, Shamsuzzoha B; Dadwal, Viva; Rutter, Paul; Storr, Julie; Hightower, Joyce D; Gooden, Rachel; Carlet, Jean; Bagheri Nejad, Sepideh; Kelley, Edward T; Donaldson, Liam; Pittet, Didier

2012-06-18

Developing countries can generate effective solutions for today's global health challenges. This paper reviews relevant literature to construct the case for international cooperation, and in particular, developed-developing country partnerships. Standard database and web-based searches were conducted for publications in English between 1990 and 2010. Studies containing full or partial data relating to international cooperation between developed and developing countries were retained for further analysis. Of 227 articles retained through initial screening, 65 were included in the final analysis. The results were two-fold: some articles pointed to intangible benefits accrued by developed country partners, but the majority of information pointed to developing country innovations that can potentially inform health systems in developed countries. This information spanned all six WHO health system components. Ten key health areas where developed countries have the most to learn from the developing world were identified and include, rural health service delivery; skills substitution; decentralisation of management; creative problem-solving; education in communicable disease control; innovation in mobile phone use; low technology simulation training; local product manufacture; health financing; and social entrepreneurship. While there are no guarantees that innovations from developing country experiences can effectively transfer to developed countries, combined developed-developing country learning processes can potentially generate effective solutions for global health systems. However, the global pool of knowledge in this area is virgin and further work needs to be undertaken to advance understanding of health innovation diffusion. Even more urgently, a standardized method for reporting partnership benefits is needed--this is perhaps the single most immediate need in planning for, and realizing, the full potential of international cooperation between developed and developing countries.

Discussion and a new method of optical cryptosystem based on interference

NASA Astrophysics Data System (ADS)

Lu, Dajiang; He, Wenqi; Liao, Meihua; Peng, Xiang

2017-02-01

A discussion and an objective security analysis of the well-known optical image encryption based on interference are presented in this paper. A new method is also proposed to eliminate the security risk of the original cryptosystem. For a possible practical application, we expand this new method into a hierarchical authentication scheme. In this authentication system, with a pre-generated and fixed random phase lock, different target images indicating different authentication levels are analytically encoded into corresponding phase-only masks (phase keys) and amplitude-only masks (amplitude keys). For the authentication process, a legal user can obtain a specified target image at the output plane if his/her phase key, and amplitude key, which should be settled close against the fixed internal phase lock, are respectively illuminated by two coherent beams. By comparing the target image with all the standard certification images in the database, the system can thus verify the user's legality even his/her identity level. Moreover, in despite of the internal phase lock of this system being fixed, the crosstalk between different pairs of keys held by different users is low. Theoretical analysis and numerical simulation are both provided to demonstrate the validity of this method.

Rapid quantitative analysis of methylphenidate and ritalinic acid in oral fluid by liquid chromatography triple quadrupole mass spectrometry (LC-QqQ-MS).

PubMed

Mulet, Carmen T; Arroyo-Mora, Luis E; Leon, Lorena A; Gnagy, Elizabeth; DeCaprio, Anthony P

2018-06-20

Methylphenidate (MPH), which is metabolized into ritalinic acid (RA), is an amphetamine derivative largely used in the treatment of attention-deficit hyperactivity disorder, a neurological condition commonly diagnosed in early childhood. Ensuring that patients comply with clinical treatment is crucial and compliance is generally monitored in blood or urine specimens which, especially in the case of children, can be challenging to obtain on a repetitive basis. Here we report validation of a specific, non-invasive, and rapid dilute-and-shoot analytical method for the detection and quantitation of MPH and RA in oral fluid (OF). The method is based on liquid chromatography coupled to triple quadrupole MS with electrospray ionization utilizing dynamic MRM mode. Subject OF specimens were collected using a Quantisal™ device, processed, and diluted for analysis with seven-point quadratic calibration curves (weighting of 1/x) using MPH-d 9 and (±)-threo-RA-d 10 as internal standards. QC samples and diluted specimens showed intra- and inter-day bias and imprecision values no greater than ±12%. The LOD and LOQ for MPH were 0.1 and 0.5 ng/mL, respectively, and 0.2 ng/mL and 0.5 ng/mL for RA, respectively, indicating the validity of the method for identification and confirmation at low concentrations. Selectivity was specific for the analytes of interest and matrix effects were minimized through the use of internal standard based quantitation. Copyright © 2018 Elsevier B.V. All rights reserved.

RADIOACTIVITY DOSAGE OF ORNAMENTAL GRANITIC ROCKS BASED ON CHEMICAL, MINERALOGICAL AND LITHOLOGICAL DATA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Salas, H.T.; Nalini, H.A. Jr.; Mendes, J.C.

2004-10-03

One hundred samples of granitic rock were collected from granite traders in Belo Horizonte. Autoradiography, optical microscopy, diffractometry, and chemical analysis (X-ray spectrometry, X-ray fluorescence, neutron activation, gravimetry and electron probe microanalysis) were used to determine the mineral assemblages and lithotypes. Autoradiographic results for several samples showed the presence of monazite, allanite and zircon. Chemical analysis revealed concentrations of uranium of {le} 30ppm, and thorium {le} 130ppm. Higher concentrations generally correlated with high concentrations of light rare earths in silica-rich rocks of granitic composition. Calculations were made of radioactive doses for floor tiles in a standard room for samples withmore » total concentration of uranium and thorium greater than 60ppm. On the basis of calculations of {sup 232}Th, {sup 40}K and {sup 226}Ra from Th, K and U analysis, the doses calculated were between 0.11 and 0.34 mSv/year, which are much lower than the acceptable international exposure standard of 1.0 mSv/year.« less

Liquid chromatography/tandem mass spectrometry method to determine boldenone in bovine liver tissues.

PubMed

Granja, Rodrigo H M M; Salerno, Alessandro G; de Lima, Andreia C; Montalvo, Cynthia; Reche, Karine V G; Giannotti, Fabio M; Wanschel, Amarylis C B A

2014-01-01

Boldenone, an androgenic steroid, is forbidden for use in meat production in most countries worldwide. Residues of this drug in food present a potential risk to consumers. A sensitive LC/MS/MS method for analysis of 17β-boldenone using boldenone-d3 as an internal standard was developed. An enzymatic hydrolysis and extraction using ethyl acetate, methanol, and hexane were performed in the sample preparation. Parameters such as decision limit (CCα), detection capability (CCβ), precision, recovery, and ruggedness were evaluated according to the Brazilian Regulation 24/2009 (equivalent to European Union Decision 2002/657/EC) and International Organization for Standardization/International Electrotechnical Commission 17025:2005. CCα and CCβ were determined to be 0.17 and 0.29 μg/kg, respectively. Average recoveries from bovine liver samples fortified with 1, 1.5, and 2 μg/kg were around 100%. A complete statistical analysis was performed on the results obtained, including an estimation of the method uncertainty. The method is considered robust after being subjected to day-to-day analytical variations and has been used as a standard method in Brazil to report boldenone levels in bovine liver.

The role of continuity in residual-based variational multiscale modeling of turbulence

NASA Astrophysics Data System (ADS)

Akkerman, I.; Bazilevs, Y.; Calo, V. M.; Hughes, T. J. R.; Hulshoff, S.

2008-02-01

This paper examines the role of continuity of the basis in the computation of turbulent flows. We compare standard finite elements and non-uniform rational B-splines (NURBS) discretizations that are employed in Isogeometric Analysis (Hughes et al. in Comput Methods Appl Mech Eng, 194:4135 4195, 2005). We make use of quadratic discretizations that are C 0-continuous across element boundaries in standard finite elements, and C 1-continuous in the case of NURBS. The variational multiscale residual-based method (Bazilevs in Isogeometric analysis of turbulence and fluid-structure interaction, PhD thesis, ICES, UT Austin, 2006; Bazilevs et al. in Comput Methods Appl Mech Eng, submitted, 2007; Calo in Residual-based multiscale turbulence modeling: finite volume simulation of bypass transition. PhD thesis, Department of Civil and Environmental Engineering, Stanford University, 2004; Hughes et al. in proceedings of the XXI international congress of theoretical and applied mechanics (IUTAM), Kluwer, 2004; Scovazzi in Multiscale methods in science and engineering, PhD thesis, Department of Mechanical Engineering, Stanford Universty, 2004) is employed as a turbulence modeling technique. We find that C 1-continuous discretizations outperform their C 0-continuous counterparts on a per-degree-of-freedom basis. We also find that the effect of continuity is greater for higher Reynolds number flows.

Communications for UAS Integration in the NAS Phase 2 Satellite Communications and Terrestrial Extension

NASA Technical Reports Server (NTRS)

Griner, Jim; Kerczewski, Bob

2017-01-01

In order to provide for the safe integration of unmanned aircraft systems (UAS) into the National Airspace System, the command and control communications link connecting the ground-based pilot with the unmanned aircraft must be highly reliable and robust, with national and international standards to enable interoperability and certification. Both line-of-sight (LOS) links using terrestrial-based communications and beyond-line-of-sight (BLOS) links using satellite communications, supported by national and international standards, are required for integrated UAS operations. The National Aeronautics and Space Administration (NASA) has undertaken an extensive technology development and test program in order to provide the required technical data needed to enable C2 standards development. NASAs UAS Integration in the National Airspace System (NAS), or UAS in the NAS Project, included as a major element the Command and Control Communications (C2) Subproject, based at NASAs Glenn Research Center. The successful first phase of the C2 Subproject, completed during 2012-2016, focused primarily on line-of-sight communications. Accomplishments included air-ground channel propagation characterization and modeling; CNPC prototype radio development; CNPC radio flight testing; satellite communications spectrum study and interference analysis; and development of C2 LOS communications standards development. The second phase of the C2 Subproject will focus primarily on beyond-line-of-sight communications, although a follow-on activity for terrestrial LOS communications, known as Terrestrial Extension, is also included. In addition to the terrestrial element, Phase 2 also includes technology development and testing activities for Ka-Band BLOS C2 Satellite Communications; Ku-Band BLOS C2 Satellite Communications; Ku-Band Interference and Propagation; and C-Band Satellite Communications. This paper will provide brief overviews of the C2 Subproject and its Phase I accomplishments, followed by a description of the plans for the C2 Subproject Phase 2.

Communications for UAS Integration in the NAS Phase 2 - Satellite Communications and Terrestrial Extension

NASA Technical Reports Server (NTRS)

Griner, James H.; Kerczewski, Robert J.

2017-01-01

In order to provide for the safe integration of unmanned aircraft systems (UAS) into the National Airspace System, the command and control communications link connecting the ground-based pilot with the unmanned aircraft must be highly reliable and robust, with national and international standards to enable interoperability and certification. Both line-of-sight (LOS) links using terrestrial-based communications and beyond-line-of-sight (BLOS) links using satellite communications, supported by national and international standards, are required for integrated UAS operations. The National Aeronautics and Space Administration (NASA) has undertaken an extensive technology development and test program in order to provide the required technical data needed to enable C2 standards development. NASAs UAS Integration in the National Airspace System (NAS), or UAS in the NAS Project, included as a major element the Command and Control Communications (C2) Subproject, based at NASAs Glenn Research Center. The successful first phase of the C2 Subproject, completed during 2012-2016, focused primarily on line-of-sight communications. Accomplishments included air-ground channel propagation characterization and modeling; CNPC prototype radio development; CNPC radio flight testing; satellite communications spectrum study and interference analysis; and development of C2 LOS communications standards development. The second phase of the C2 Subproject will focus primarily on beyond-line-of-sight communications, although a follow-on activity for terrestrial LOS communications, known as Terrestrial Extension, is also included. In addition to the terrestrial element, Phase 2 also includes technology development and testing activities for Ka-Band BLOS C2 Satellite Communications; Ku-Band BLOS C2 Satellite Communications; Ku-Band Interference and Propagation; and C-Band Satellite Communications. This paper will provide brief overviews of the C2 Subproject and its Phase I accomplishments, followed by a description of the plans for the C2 Subproject Phase 2.

"A Doubt is at Best an Unsafe Standard": Measuring Sugar in the Early Bureau of Standards.

PubMed

Singerman, David

2007-01-01

In 1900, measuring the purity of sugar was a problem with serious economic consequences, and Congress created the Bureau of Standards in part to create accurate standards for saccharimetry. To direct the Polarimetry Section, Director Stratton hired the young chemist Frederick Bates, who went on to make significant contributions to the discipline of sugar chemistry. This paper explores four of Bates's greatest accomplishments: identifying the error caused by clarifying lead acetate, inventing the remarkable quartz-compensating saccharimeter with adjustable sensibility, discovering the significant error in the prevailing Ventzke saccharimetric scale, and reviving the International Commission for Uniform Methods of Sugar Analysis to unify the international community of chemists after the tensions of World War One. It also shows how accomplishments in saccharimetry reflected the growing importance and confidence of the Bureau of Standards, and how its scientific success smoothed the operation of American commerce.

The h-p Version of the Finite Element Method for Problems with Nonhomogeneous Essential Boundary Condition.

DTIC Science & Technology

1987-09-01

one commercial code based on the p and h-p version of the finite element, the program PROBE of NOETIC Technologies (St. Louis, MO). PROBE deals with two...Standards. o To be an international center of study and research for foreign students in numerical mathematics who are supported by foreign govern- ments or...ment agencies such as the National Bureau of Standards. o To be an international center of study and research for foreign students in numerical

Equity in Pharmaceutical Pricing and Reimbursement: Crossing the Income Divide in Asia Pacific.

PubMed

Daems, Rutger; Maes, Edith; Glaetzer, Christoph

2013-05-01

The article takes a three-dimensional approach (triangulation) in defining international pricing policy for pharmaceuticals using cost-effectiveness analysis (CEA), willingness-to-pay (WTP) analysis, and ability-to-pay (ATP) analysis. It attempts to find a balance between the various economic methods of which some focus on effectiveness while others are geared toward incorporating equity in the equation. A critical review of the first two established economic methods and their ability to evaluate not only "efficacy" but also "fairness" in pricing decisions identifies a gap in the latter. Therefore, a third analytic method is presented that measures the ATP based on a country's score in the human development index of the United Nations Development Program for 120 countries. This approach allows practicing differential pricing among and within countries. To refine this equity-driven pricing concept, two additional parameters can be added to the model: the Oxford "Multidimensional Poverty Index" and the "Out-of-Pocket" or "Self Pay" health expenditure as reported by the World Bank. There is no hierarchy between the above three pricing methods. Because one method provides further insight into the other, however, it is recommended to start with CEA followed by WTP analysis. These types of analysis are closely linked in that the first provides the CE ratio for the compound investigated and the other sets the anticipated ceiling threshold of the payer's WTP (in a particular country). The ATP method provides a supplementary "equity" check and facilitates the process of equity-based differential pricing. A third method should be used in conjunction with the standard CEA and WTP analysis that measures the ATP with the human development index as yardstick to provide sustainable and equitable access to medicines. We recommend that ATP analysis becomes an additional practice in policy decision making and in defining international pricing strategies for pharmaceuticals. Copyright © 2013 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Protein Quantification by Derivatization-Free High-Performance Liquid Chromatography of Aromatic Amino Acids

PubMed Central

Hesse, Almut

2016-01-01

Amino acid analysis is considered to be the gold standard for quantitative peptide and protein analysis. Here, we would like to propose a simple HPLC/UV method based on a reversed-phase separation of the aromatic amino acids tyrosine (Tyr), phenylalanine (Phe), and optionally tryptophan (Trp) without any derivatization. The hydrolysis of the proteins and peptides was performed by an accelerated microwave technique, which needs only 30 minutes. Two internal standard compounds, homotyrosine (HTyr) and 4-fluorophenylalanine (FPhe) were used for calibration. The limit of detection (LOD) was estimated to be 0.05 µM (~10 µg/L) for tyrosine and phenylalanine at 215 nm. The LOD for a protein determination was calculated to be below 16 mg/L (~300 ng BSA absolute). Aromatic amino acid analysis (AAAA) offers excellent accuracy and a precision of about 5% relative standard deviation, including the hydrolysis step. The method was validated with certified reference materials (CRM) of amino acids and of a pure protein (bovine serum albumin, BSA). AAAA can be used for the quantification of aromatic amino acids, isolated peptides or proteins, complex peptide or protein samples, such as serum or milk powder, and peptides or proteins immobilized on solid supports. PMID:27559481

Insulation Cork Boards-Environmental Life Cycle Assessment of an Organic Construction Material.

PubMed

Silvestre, José D; Pargana, Nuno; de Brito, Jorge; Pinheiro, Manuel D; Durão, Vera

2016-05-20

Envelope insulation is a relevant technical solution to cut energy consumption and reduce environmental impacts in buildings. Insulation Cork Boards (ICB) are a natural thermal insulation material whose production promotes the recycling of agricultural waste. The aim of this paper is to determine and evaluate the environmental impacts of the production, use, and end-of-life processing of ICB. A "cradle-to-cradle" environmental Life Cycle Assessment (LCA) was performed according to International LCA standards and the European standards on the environmental evaluation of buildings. These results were based on site-specific data and resulted from a consistent methodology, fully described in the paper for each life cycle stage: Cork oak tree growth, ICB production, and end-of-life processing-modeling of the carbon flows ( i.e. , uptakes and emissions), including sensitivity analysis of this procedure; at the production stage-the modeling of energy processes and a sensitivity analysis of the allocation procedures; during building operation-the expected service life of ICB; an analysis concerning the need to consider the thermal diffusivity of ICB in the comparison of the performance of insulation materials. This paper presents the up-to-date "cradle-to-cradle" environmental performance of ICB for the environmental categories and life-cycle stages defined in European standards.

Insulation Cork Boards—Environmental Life Cycle Assessment of an Organic Construction Material

PubMed Central

Silvestre, José D.; Pargana, Nuno; de Brito, Jorge; Pinheiro, Manuel D.; Durão, Vera

2016-01-01

Envelope insulation is a relevant technical solution to cut energy consumption and reduce environmental impacts in buildings. Insulation Cork Boards (ICB) are a natural thermal insulation material whose production promotes the recycling of agricultural waste. The aim of this paper is to determine and evaluate the environmental impacts of the production, use, and end-of-life processing of ICB. A “cradle-to-cradle” environmental Life Cycle Assessment (LCA) was performed according to International LCA standards and the European standards on the environmental evaluation of buildings. These results were based on site-specific data and resulted from a consistent methodology, fully described in the paper for each life cycle stage: Cork oak tree growth, ICB production, and end-of-life processing-modeling of the carbon flows (i.e., uptakes and emissions), including sensitivity analysis of this procedure; at the production stage—the modeling of energy processes and a sensitivity analysis of the allocation procedures; during building operation—the expected service life of ICB; an analysis concerning the need to consider the thermal diffusivity of ICB in the comparison of the performance of insulation materials. This paper presents the up-to-date “cradle-to-cradle” environmental performance of ICB for the environmental categories and life-cycle stages defined in European standards. PMID:28773516

Metabolomics Workbench: An international repository for metabolomics data and metadata, metabolite standards, protocols, tutorials and training, and analysis tools

PubMed Central

Sud, Manish; Fahy, Eoin; Cotter, Dawn; Azam, Kenan; Vadivelu, Ilango; Burant, Charles; Edison, Arthur; Fiehn, Oliver; Higashi, Richard; Nair, K. Sreekumaran; Sumner, Susan; Subramaniam, Shankar

2016-01-01

The Metabolomics Workbench, available at www.metabolomicsworkbench.org, is a public repository for metabolomics metadata and experimental data spanning various species and experimental platforms, metabolite standards, metabolite structures, protocols, tutorials, and training material and other educational resources. It provides a computational platform to integrate, analyze, track, deposit and disseminate large volumes of heterogeneous data from a wide variety of metabolomics studies including mass spectrometry (MS) and nuclear magnetic resonance spectrometry (NMR) data spanning over 20 different species covering all the major taxonomic categories including humans and other mammals, plants, insects, invertebrates and microorganisms. Additionally, a number of protocols are provided for a range of metabolite classes, sample types, and both MS and NMR-based studies, along with a metabolite structure database. The metabolites characterized in the studies available on the Metabolomics Workbench are linked to chemical structures in the metabolite structure database to facilitate comparative analysis across studies. The Metabolomics Workbench, part of the data coordinating effort of the National Institute of Health (NIH) Common Fund's Metabolomics Program, provides data from the Common Fund's Metabolomics Resource Cores, metabolite standards, and analysis tools to the wider metabolomics community and seeks data depositions from metabolomics researchers across the world. PMID:26467476

An Internationally Consented Standard for Nursing Process-Clinical Decision Support Systems in Electronic Health Records.

PubMed

Müller-Staub, Maria; de Graaf-Waar, Helen; Paans, Wolter

2016-11-01

Nurses are accountable to apply the nursing process, which is key for patient care: It is a problem-solving process providing the structure for care plans and documentation. The state-of-the art nursing process is based on classifications that contain standardized concepts, and therefore, it is named Advanced Nursing Process. It contains valid assessments, nursing diagnoses, interventions, and nursing-sensitive patient outcomes. Electronic decision support systems can assist nurses to apply the Advanced Nursing Process. However, nursing decision support systems are missing, and no "gold standard" is available. The study aim is to develop a valid Nursing Process-Clinical Decision Support System Standard to guide future developments of clinical decision support systems. In a multistep approach, a Nursing Process-Clinical Decision Support System Standard with 28 criteria was developed. After pilot testing (N = 29 nurses), the criteria were reduced to 25. The Nursing Process-Clinical Decision Support System Standard was then presented to eight internationally known experts, who performed qualitative interviews according to Mayring. Fourteen categories demonstrate expert consensus on the Nursing Process-Clinical Decision Support System Standard and its content validity. All experts agreed the Advanced Nursing Process should be the centerpiece for the Nursing Process-Clinical Decision Support System and should suggest research-based, predefined nursing diagnoses and correct linkages between diagnoses, evidence-based interventions, and patient outcomes.

Determination of Labeled Fatty Acids Content in Milk Products, Infant Formula, and Adult/Pediatric Nutritional Formula by Capillary Gas Chromatography: Collaborative Study, Final Action 2012.13.

PubMed

Golay, Pierre-Alain; Moulin, Julie

2016-01-01

A collaborative study was conducted on AOAC First Action Method 2012.13 "Determination of Labeled Fatty Acids Content in Milk Products and Infant Formula by Capillary Gas Chromatography," which is based on an initial International Organization for Standardization (ISO)-International Dairy Federation (IDF) New Work Item that has been moved forward to ISO 16958:2015|IDF 231:2015 in November 2015. It was decided to merge the two activities after the agreement signed between ISO and AOAC in June 2012 to develop common standards and to avoid duplicate work. The collaborative study was performed after having provided highly satisfactory single-laboratory validation results [Golay, P.A., & Dong, Y. (2015) J. AOAC Int. 98, 1679-1696] that exceeded the performance criteria defined in AOAC Standard Method Performance Requirement (SMPR(®)) 2012.011 (September 29, 2012) on 12 products selected by the AOAC Stakeholder Panel on Infant Formula (SPIFAN). After a qualification period of 1 month, 18 laboratories participated in the fatty acids analysis of 12 different samples in duplicate. Six samples were selected to meet AOAC SPIFAN requirements (i.e., infant formula and adult nutritionals in powder and liquid formats), and the other Six samples were selected to meet ISO-IDF requirements (i.e., dairy products such as milk powder, liquid milk, cream, butter, infant formula with milk, and cheese). The fatty acids were analyzed directly in all samples without preliminary fat extraction, except in one sample (cheese). Powdered samples were analyzed after dissolution (i.e., reconstitution) in water, whereas liquid samples (or extracted fat) were analyzed directly. After addition of the internal standards solution [C11:0 fatty acid methyl ester (FAME) and C13:0 triacylglycerols (TAG)] to the samples, fatty acids attached to lipids were transformed into FAMEs by direct transesterification using methanolic sodium methoxide. FAMEs were separated using highly polar capillary GLC and were identified by comparison with the retention times of pure analytical standards. Quantification of fatty acids was done relative to C11:0 FAME as internal standard and to instrument response factors (determined separately using calibration standards mixture). The performance of the method (i.e., transesterification) was monitored in all samples using the second internal standard, C13:0 TAG. RSDR values were summarized separately for labeled fatty acids in SPIFAN materials and ISO-IDF materials due to different expression of results. This method was applied to representative dairy, infant formula, and adult/pediatric nutritional products and demonstrated global acceptable reproducibility precision for all fatty acids analyzed (i.e., 46 individuals and/or groups) for these categories of products.

76 FR 1889 - Risk-Based Capital Guidelines: Market Risk

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-11

... regulatory measurement methodologies; and increase transparency through enhanced disclosures. The proposal... banks \\1\\ entitled International Convergence of Capital Measurement and Capital Standards (1988 Capital... the internal models approach (see http://www.bis.org/press/p970918a.htm ). \\5\\ 61 FR 47358 (September...

Analysis of glycosaminoglycans in cerebrospinal fluid from patients with mucopolysaccharidoses by isotope-dilution ultra-performance liquid chromatography-tandem mass spectrometry.

PubMed

Zhang, Haoyue; Young, Sarah P; Auray-Blais, Christiane; Orchard, Paul J; Tolar, Jakub; Millington, David S

2011-07-01

New therapies for the treatment of mucopolysaccharidoses that target the brain, including intrathecal enzyme replacement, are being explored. Quantitative analysis of the glycosaminoglycans (GAGs) that accumulate in these disorders is required to assess the disease burden and monitor the effect of therapy in affected patients. Because current methods lack the required limit of quantification and specificity to analyze GAGs in small volumes of cerebrospinal fluid (CSF), we developed a method based on ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). Samples of CSF (25 μL) were evaporated to dryness and subjected to methanolysis. The GAGs were degraded to uronic acid-N-acetylhexosamine dimers and mixed with internal standards derived from deuteriomethanolysis of GAG standards. Specific dimers derived from heparan, dermatan and chondroitin sulfates (HS, DS and CS) were separated by UPLC and analyzed by electrospray ionization MS/MS using selected reaction monitoring for each targeted GAG product and its corresponding internal standard. CSF from control pediatric subjects (n = 22) contained <0.38 mg/L HS, 0.26 mg/L DS, and 2.8 mg/L CS, whereas CSF from patients with Hurler syndrome (n = 7) contained concentrations of DS and HS that were at least 6-fold greater than the upper control limits. These concentrations were reduced by 17.5% to 82.5% after allogeneic transplantation and treatment with intrathecal and intravenous enzyme replacement therapy. The method described here has potential value in monitoring patients with mucopolysaccharidoses receiving treatment targeted to the brain.

Benchmarking and Threshold Standards in Higher Education. Staff and Educational Development Series.

ERIC Educational Resources Information Center

Smith, Helen, Ed.; Armstrong, Michael, Ed.; Brown, Sally, Ed.

This book explores the issues involved in developing standards in higher education, examining the practical issues involved in benchmarking and offering a critical analysis of the problems associated with this developmental tool. The book focuses primarily on experience in the United Kingdom (UK), but looks also at international activity in this…

Professional Teaching Standards: A Comparative Analysis of Their History, Implementation and Efficacy

ERIC Educational Resources Information Center

Call, Kairen

2018-01-01

Since the publication of results from the first iteration of testing within the Programme for International Student Assessment (PISA) and the ensuing media consternation and political rhetoric about teacher quality in education systems around the world, professional standards for teachers have been considered, developed and implemented globally in…

How Is Cultural Diversity Positioned in Teacher Professional Standards? An International Analysis

ERIC Educational Resources Information Center

Santoro, Ninetta; Kennedy, Aileen

2016-01-01

Unprecedented levels of global mobility mean that culturally homogenous classrooms are now increasingly rare. This brings with it challenges for teachers and raises issues about what constitutes quality teaching and teachers. Professional standards are commonly seen as a key policy instrument through which teacher quality can be enhanced. This…

Vitamin D levels in fish and shellfish determined by liquid chromatography with ultraviolet detection and mass spectrometry

USDA-ARS?s Scientific Manuscript database

Vitamin D3 (cholecalciferol) levels were determined in finfish and shellfish using UV detection at 265nm (combined with auxiliary full scan UV detection) and selected ion monitoring (SIM) mass spectrometry (MS), using vitamin D2 (ergocalciferol) as an internal standard. Analysis of standard referen...

Systematic Review of International Colposcopy Quality Improvement Guidelines.

PubMed

Mayeaux, Edward J; Novetsky, Akiva P; Chelmow, David; Choma, Kim; Garcia, Francisco; Liu, Angela H; Papasozomenos, Theognosia; Einstein, Mark H

2017-10-01

The American Society for Colposcopy and Cervical Pathology Colposcopy Standards Committee organized multiple working groups to draft colposcopy standards for the United States. As part of this project, international quality assurance and improvement measures were examined. The quality improvement working group performed a systematic review of the literature to collate international guidelines related to quality improvement. Source guidelines were collected using searches in Medline, Google Scholar, the International Federation of Cervical Pathology and Colposcopy Web site, other regional colposcopy group's Web sites, and communications with International Federation of Cervical Pathology and Colposcopy board of directors' members and other expert members of various national groups. Once identified, the sources were reviewed by multiple workgroup members for potential guideline materials. Fifty-six unique documents were identified, of which 18 met inclusion criteria and contributed data to the analysis. Information was abstracted and grouped by related subject. Wide variation exists in colposcopy guidance and quality indicators from regional and national colposcopy societies. Abstracted international guidelines are presented.

Drinking water quality standards and standard tests: Worldwide. (Latest citations from the Food Science and Technology Abstracts database). Published Search

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-06-01

The bibliography contains citations concerning standards and standard tests for water quality in drinking water sources, reservoirs, and distribution systems. Standards from domestic and international sources are presented. Glossaries and vocabularies that concern water quality analysis, testing, and evaluation are included. Standard test methods for individual elements, selected chemicals, sensory properties, radioactivity, and other chemical and physical properties are described. Discussions for proposed standards on new pollutant materials are briefly considered. (Contains a minimum of 203 citations and includes a subject term index and title list.)

A Method Based on Artificial Intelligence To Fully Automatize The Evaluation of Bovine Blastocyst Images.

PubMed

Rocha, José Celso; Passalia, Felipe José; Matos, Felipe Delestro; Takahashi, Maria Beatriz; Ciniciato, Diego de Souza; Maserati, Marc Peter; Alves, Mayra Fernanda; de Almeida, Tamie Guibu; Cardoso, Bruna Lopes; Basso, Andrea Cristina; Nogueira, Marcelo Fábio Gouveia

2017-08-09

Morphological analysis is the standard method of assessing embryo quality; however, its inherent subjectivity tends to generate discrepancies among evaluators. Using genetic algorithms and artificial neural networks (ANNs), we developed a new method for embryo analysis that is more robust and reliable than standard methods. Bovine blastocysts produced in vitro were classified as grade 1 (excellent or good), 2 (fair), or 3 (poor) by three experienced embryologists according to the International Embryo Technology Society (IETS) standard. The images (n = 482) were subjected to automatic feature extraction, and the results were used as input for a supervised learning process. One part of the dataset (15%) was used for a blind test posterior to the fitting, for which the system had an accuracy of 76.4%. Interestingly, when the same embryologists evaluated a sub-sample (10%) of the dataset, there was only 54.0% agreement with the standard (mode for grades). However, when using the ANN to assess this sub-sample, there was 87.5% agreement with the modal values obtained by the evaluators. The presented methodology is covered by National Institute of Industrial Property (INPI) and World Intellectual Property Organization (WIPO) patents and is currently undergoing a commercial evaluation of its feasibility.

Thermal neutral format based on the step technology

NASA Technical Reports Server (NTRS)

Almazan, P. Planas; Legal, J. L.

1995-01-01

The exchange of models is one of the most serious problems currently encountered in the practice of spacecraft thermal analysis. Essentially, the problem originates in the diversity of computing environments that are used across different sites, and the consequent proliferation of native tool formats. Furthermore, increasing pressure to reduce the development's life cycle time has originated a growing interest in the so-called spacecraft concurrent engineering. In this context, the realization of the interdependencies between different disciplines and the proper communication between them become critical issues. The use of a neutral format represents a step forward in addressing these problems. Such a means of communication is adopted by consensus. A neutral format is not directly tied to any specific tool and it is kept under stringent change control. Currently, most of the groups promoting exchange formats are contributing with their experience to STEP, the Standard for Exchange of Product Model Data, which is being developed under the auspices of the International Standards Organization (ISO 10303). This paper presents the different efforts made in Europe to provide the spacecraft thermal analysis community with a Thermal Neutral Format (TNF) based on STEP. Following an introduction with some background information, the paper presents the characteristics of the STEP standard. Later, the first efforts to produce a STEP Spacecraft Thermal Application Protocol are described. Finally, the paper presents the currently harmonized European activities that follow up and extend earlier work on the area.

Development of a Protein Standard Absolute Quantification (PSAQ™) assay for the quantification of Staphylococcus aureus enterotoxin A in serum.

PubMed

Adrait, Annie; Lebert, Dorothée; Trauchessec, Mathieu; Dupuis, Alain; Louwagie, Mathilde; Masselon, Christophe; Jaquinod, Michel; Chevalier, Benoît; Vandenesch, François; Garin, Jérôme; Bruley, Christophe; Brun, Virginie

2012-06-06

Enterotoxin A (SEA) is a staphylococcal virulence factor which is suspected to worsen septic shock prognosis. However, the presence of SEA in the blood of sepsis patients has never been demonstrated. We have developed a mass spectrometry-based assay for the targeted and absolute quantification of SEA in serum. To enhance sensitivity and specificity, we combined an immunoaffinity-based sample preparation with mass spectrometry analysis in the selected reaction monitoring (SRM) mode. Absolute quantification of SEA was performed using the PSAQ™ method (Protein Standard Absolute Quantification), which uses a full-length isotope-labeled SEA as internal standard. The lower limit of detection (LLOD) and lower limit of quantification (LLOQ) were estimated at 352pg/mL and 1057pg/mL, respectively. SEA recovery after immunocapture was determined to be 7.8±1.4%. Therefore, we assumed that less than 1femtomole of each SEA proteotypic peptide was injected on the liquid chromatography column before SRM analysis. From a 6-point titration experiment, quantification accuracy was determined to be 77% and precision at LLOQ was lower than 5%. With this sensitive PSAQ-SRM assay, we expect to contribute to decipher the pathophysiological role of SEA in severe sepsis. This article is part of a Special Issue entitled: Proteomics: The clinical link. Copyright © 2011 Elsevier B.V. All rights reserved.

Exposure assessment of upper limb repetitive movements: a consensus document developed by the Technical Committee on Musculoskeletal Disorders of International Ergonomics Association (IEA) endorsed by International Commission on Occupational Health (ICOH).

PubMed

Colombini, D; Occhipinti, E; Delleman, N; Fallentin, N; Kilbom, A; Grieco, A

2001-01-01

This consensus document intends to supply a set of definitions, criteria and procedures useful to describe and, wherever possible, to assess the work conditions that can represent a physical overload for the upper limbs. The document is aimed at all the operators, i.e. occupational doctors but mainly technicians, who are, involved in risk exposure assessment and management. The document intends to provide methods and procedures easily applicable in the field, possibly not requiring sophisticated instrumentation and when possible based on observation procedures. The proposed methods shall be based as far as possible on knowledge and data from scientific literature: should they be contradictory or deficient, reference will be made to standards or pre-standards issued by national and international agencies and bodies, with the experience of researchers involved and common sense. In this regard, it is to be emphasized that the potential users increasingly demand an easily applicable method for description and assessment of work with repetitive movements. The group intends to give a response even if there are still uncertainties from a strictly scientific standpoint: however the group commits itself to perform subsequent validations especially of as yet unconsolidated issues. This document focuses specifically on identification of risk factors and describes some of the methods that have been developed for evaluating them. There is a rapidly developing body of literature on job analysis and not yet agreement on a single best way to analyze jobs. Professional judgement is required to select the appropriate methods. Analysis and design of jobs should to be integrated into an ongoing ergonomics program that includes management commitment, training, health surveillance, and medical case management. In summing up this report, space must be given to the check lists that are so often seen in the medical press, although this is not the occasion to propose a detailed analytical review.

Official Methods for the Determination of Minerals and Trace Elements in Infant Formula and Milk Products: A Review.

PubMed

Poitevin, Eric

2016-01-01

The minerals and trace elements that account for about 4% of total human body mass serve as materials and regulators in numerous biological activities in body structure building. Infant formula and milk products are important sources of endogenic and added minerals and trace elements and hence, must comply with regulatory as well as nutritional and safety requirements. In addition, reliable analytical data are necessary to support product content and innovation, health claims, or declaration and specific safety issues. Adequate analytical platforms and methods must be implemented to demonstrate both the compliance and safety assessment of all declared and regulated minerals and trace elements, especially trace-element contaminant surveillance. The first part of this paper presents general information on the mineral composition of infant formula and milk products and their regulatory status. In the second part, a survey describes the main techniques and related current official methods determining minerals and trace elements in infant formula and milk products applied for by various international organizations (AOAC INTERNATIONAL, the International Organization for Standardization, the International Dairy Federation, and the European Committe for Standardization). The third part summarizes method officialization activities by Stakeholder Panels on Infant Formula and Adult Nutritionals and Stakeholder Panel on Strategic Food Analytical Methods. The final part covers a general discussion focusing on analytical gaps and future trends in inorganic analysis that have been applied for in infant formula and milk-based products.

In view of standardization: comparison and analysis of initial management of severely burned patients in Germany, Austria and Switzerland.

PubMed

Münzberg, Matthias; Ziegler, Benjamin; Fischer, Sebastian; Wölfl, Christoph Georg; Grützner, Paul Alfred; Kremer, Thomas; Kneser, Ulrich; Hirche, Christoph

2015-02-01

Initial treatment of severely injured patients in German speaking trauma centers follows precise sequences. Several guidelines and training courses ensure a constant quality in providing evidence-based treatment for these patients. Similar standards, algorithms and guidelines for the treatment of severely burned patients are lacking. This raises the question about the current standard of care for burn victims in German speaking burn centers. In order to achieve standardization, as a first step this study surveys principles of burn room organization and management in these burn centers. A questionnaire including 40 questions regarding burn room organization, personnel structure and qualification, infrastructural conditions and quality management was developed and sent to 21 level one burn centers in Germany, Austria and Switzerland. The rate of returned questionnaires was 81%. The analysis revealed varying personnel and infrastructural conditions in participating burn centers. Indications for admission to the burn room and admission procedures itself are different throughout surveyed hospitals. Individual standard operating procedure (SOP) for burn trauma admissions was available in most burn centers and nearly all participants register their burn trauma cases using an in-house burn register. The survey suggests a lack of standardization in personnel structure, infrastructure and treatment approach for the initial clinical care of severely burned patients in burn centers across the German speaking countries. Further evaluation of existing protocols and international standards in burn care is inevitable to develop standardized guidelines for burn care and to improve quality of care. Copyright © 2014 Elsevier Ltd and ISBI. All rights reserved.

Correction of the data generated by mass spectrometry analyses of biological tissues: application to food authentication.

PubMed

Engel, Erwan; Ratel, Jérémy

2007-06-22

The objective of the work was to assess the relevance for the authentication of food of a novel chemometric method developed to correct mass spectrometry (MS) data from instrumental drifts, namely, the comprehensive combinatory standard correction (CCSC). Applied to gas chromatography (GC)-MS data, the method consists in analyzing a liquid sample with a mixture of n internal standards and in using the best combination of standards to correct the MS signal provided by each compound. The paper focuses on the authentication of the type of feeding in farm animals based on the composition in volatile constituents of their adipose tissues. The first step of the work enabled on one hand to ensure the feasibility of the conversion of the adipose tissue sample into a liquid phase required for the use of the CCSC method and on the other hand, to determine the key parameters of the extraction of the volatile fraction from this liquid phase by dynamic headspace. The second step showed the relevance of the CCSC pre-processing of the MS fingerprints generated by dynamic headspace-MS analysis of lamb tissues, for the discrimination of animals fed exclusively with pasture (n=8) or concentrate (n=8). When compared with filtering of raw data, internal normalization and correction by a single standard, the CCSC method increased by 17.1-, 3.3- and 1.3-fold, respectively, the number of mass fragments which discriminated the type of feeding. The final step confirmed the advantage of the CCSC pre-processing of dynamic headspace-gas chromatography-MS data for revealing molecular tracers of the type of feeding those number (n=72) was greater when compared to the number of tracers obtained with raw data (n=42), internal normalization (n=63) and correction by a single standard (n=57). The relevance of the information gained by using the CCSC method is discussed.

A cluster-based approach to selecting representative stimuli from the International Affective Picture System (IAPS) database.

PubMed

Constantinescu, Alexandra C; Wolters, Maria; Moore, Adam; MacPherson, Sarah E

2017-06-01

The International Affective Picture System (IAPS; Lang, Bradley, & Cuthbert, 2008) is a stimulus database that is frequently used to investigate various aspects of emotional processing. Despite its extensive use, selecting IAPS stimuli for a research project is not usually done according to an established strategy, but rather is tailored to individual studies. Here we propose a standard, replicable method for stimulus selection based on cluster analysis, which re-creates the group structure that is most likely to have produced the valence arousal, and dominance norms associated with the IAPS images. Our method includes screening the database for outliers, identifying a suitable clustering solution, and then extracting the desired number of stimuli on the basis of their level of certainty of belonging to the cluster they were assigned to. Our method preserves statistical power in studies by maximizing the likelihood that the stimuli belong to the cluster structure fitted to them, and by filtering stimuli according to their certainty of cluster membership. In addition, although our cluster-based method is illustrated using the IAPS, it can be extended to other stimulus databases.

Stability Following Combined Maxillary and Mandibular Osteotomies Treated with Rigid Internal Fixation.

DTIC Science & Technology

1987-06-01

splint and verified seating of the mandibular condyles in the glenoid fossae, the maxilla was initially secured with bilaterally placed Steinmann pins...mandible upon closure for approximately 2 to 4 weeks. Cephalometrlc Analysis * . Each patient had standardized lateral cephalometric radiographs taken (Quint... analysis was perormed by standard decripve evaluation using Statview 512+ program.4 5 Tre changes in each parameter from T1T2, T2-T3, TI-T3, (Fig. 1) as

Spectrochemical determination of thorium in monazite by the powder-d.c. arc technique

USGS Publications Warehouse

Dutra, C.V.; Murata, K.J.

1954-01-01

Thorium in monazite is determined by a d.c. carbon-arc technique using zirconium as the internal standard. The analytical curve for Th II 2870.413 A??/Zr II 2844-579 A?? is established by means of synthetic standards containing graduated amounts of thoria and 0.500 per cent zirconia in pegmatite base (60 parts quartz, 40 parts microchne, and 1 part ferric oxide). Monazite samples are diluted 14-fold with pegmatite base that contains 0.538 per cent ZrO2, so that the zirconia content of the resulting mixture is also 0.500 per cent. In addition, both the standards and the diluted monazites are mixed with one-half their weight of powdered graphite. Approximately 25 mg of the prepared samples are arced to completion at 15.5 to 17.5 amperes. With the 14-fold dilution employed, the accurate range of the method is 3 to 20 per cent thoria in the original monazite. The coefficient of variation for a single determination is 4 per cent at the 7 per cent thoria level. Tests with synthetic unknowns and chemically analyzed monazites show a maximum error of ??10 per cent of the thoria content. If niobium is substituted for zirconium as the internal standard, there is a loss of precision. Platinum as the internal standard gives results of good precision but introduces a marked sensitivity to matrix effects. ?? 1954.

Rabies vaccine standards: comparison of the 5th and 6th WHO international reference standards to the USDA veterinary reference standard.

PubMed

Hermann, J; Fry, A; Reising, M; Patterson, P; Siev, D; Gatewood, D

2012-11-06

Ensuring rabies vaccines are potent and effective is paramount in preventing transmission of this deadly disease and safeguarding public health. Efficacy of human and veterinary vaccines is ensured by evaluating relative potency estimates of the vaccine compared to a rabies reference standard using the National Institutes of Health (NIH) test. Reference vaccines are based on the International Standard for Rabies Vaccine provided by the World Health Organization (WHO). A comparison study was conducted to determine the relative potency of the 5th WHO, 6th WHO, and United States Department of Agriculture's (USDA) 08-14 reference standards using the NIH test. Results from the study demonstrate that the 6th WHO reference standard is approximately twice as potent as the 5th WHO reference when reconstituted to contain 1 IU per ml. Based on these results, the Center for Veterinary Biologics (CVB) doubled the reconstitution volume of USDA veterinary reference 08-14 from 13 ml to 26 ml, for an initial use dilution of 0.7 IU per ml for use by veterinary biologics manufacturers in the NIH test. This study emphasizes the importance of reference standard calibration for use in the National Institutes of Health test. Published by Elsevier Ltd.

Triceps and Subscapular Skinfold Thickness Percentiles and Cut-Offs for Overweight and Obesity in a Population-Based Sample of Schoolchildren and Adolescents in Bogota, Colombia.

PubMed

Ramírez-Vélez, Robinson; López-Cifuentes, Mario Ferney; Correa-Bautista, Jorge Enrique; González-Ruíz, Katherine; González-Jiménez, Emilio; Córdoba-Rodríguez, Diana Paola; Vivas, Andrés; Triana-Reina, Hector Reynaldo; Schmidt-RioValle, Jacqueline

2016-09-24

The assessment of skinfold thickness is an objective measure of adiposity. The aims of this study were to establish Colombian smoothed centile charts and LMS L (Box-Cox transformation), M (median), and S (coefficient of variation) tables for triceps, subscapular, and triceps + subscapular skinfolds; appropriate cut-offs were selected using receiver operating characteristic (ROC) analysis based on a population-based sample of children and adolescents in Bogotá, Colombia. A cross-sectional study was conducted in 9618 children and adolescents (55.7% girls; age range of 9-17.9 years). Triceps and subscapular skinfold measurements were obtained using standardized methods. We calculated the triceps + subscapular skinfold (T + SS) sum. Smoothed percentile curves for triceps and subscapular skinfold thickness were derived using the LMS method. ROC curve analyses were used to evaluate the optimal cut-off point of skinfold thickness for overweight and obesity, based on the International Obesity Task Force definitions. Subscapular and triceps skinfolds and T + SS were significantly higher in girls than in boys (p < 0.001). The ROC analysis showed that subscapular and triceps skinfolds and T + SS have a high discriminatory power in the identification of overweight and obesity in the sample population in this study. Our results provide sex- and age-specific normative reference standards for skinfold thickness values from a population from Bogotá, Colombia.

Environmental assessment of energy production based on long term commercial willow plantations in Sweden.

PubMed

González-García, Sara; Mola-Yudego, Blas; Dimitriou, Ioannis; Aronsson, Pär; Murphy, Richard

2012-04-01

The present paper analyzed the environmental assessment of short rotation willow plantations in Sweden based on the standard framework of Life Cycle Assessment (LCA) from the International Standards Organisation. The analysis is focused on two alternative management regimes for willow plantations dedicated to biomass production for energy purposes. The data used included the averages of a large sample of commercial plantations. One of the scenarios is carried out under nitrogen based fertilized conditions and the other under non-fertilized management with total biomass yields (dry weight) of 140t/ha and 86t/ha over a 21 and 22-year life time respectively. The environmental profile was analyzed in terms of the potentials for abiotic depletion, acidification, eutrophication, global warming, ozone layer depletion, photochemical oxidant formation, human toxicity, fresh water aquatic ecotoxicity, marine aquatic ecotoxicity and terrestrial ecotoxicity. In addition, an energy analysis was performed using the cumulative energy demand method (CED). The application of nitrogen based fertilizers allows an increase in the biomass yield per ha of up to 40% although the contributions to almost all impact categories, particularly the eutrophication potential and toxicity potential impact categories are also considerably higher. Conversely, due to the higher biomass yields achieved with fertilization of these willow plantations, that regime presents a better overall environmental profile in terms of energy yield and global warming potential. Copyright © 2012 Elsevier B.V. All rights reserved.

Measuring Performance with Library Automated Systems.

ERIC Educational Resources Information Center

OFarrell, John P.

2000-01-01

Investigates the capability of three library automated systems to generate some of the datasets necessary to form the ISO (International Standards Organization) standard on performance measurement within libraries, based on research in Liverpool John Moores University (United Kingdom). Concludes that the systems are weak in generating the…

Federal information processing standards codes [for places around the world

DOT National Transportation Integrated Search

1993-05-01

Intended as a companion to the International Travel and Tourism CD-ROM, this document provides the provisional list of the Federal Information Processing Standards. It is based on the FIPS Pub 10-4 and contains Change Notices #1-15, and is current as...

Legal Time of the Republic of Colombia and its international traceability using the Cesium Atomic Clock - Time and Frequency National Standard

NASA Astrophysics Data System (ADS)

Hernández Forero, Liz Catherine; Bahamón Cortés, Nelson

2017-06-01

Around the world, there are different providers of timestamp (mobile, radio or television operators, satellites of the GPS network, astronomical measurements, etc.), however, the source of the legal time for a country is either the national metrology institute or another designated laboratory. This activity requires a time standard based on an atomic time scale. The International Bureau of Weights and Measures (BIPM) calculates a weighted average of the time kept in more than 60 nations and produces a single international time scale, called Coordinated Universal Time (UTC). This article presents the current time scale that generates Legal Time for the Republic of Colombia produced by the Instituto Nacional de Metrología (INM) using the time and frequency national standard, a cesium atomic oscillator. It also illustrates how important it is for the academic, scientific and industrial communities, as well as the general public, to be synchronized with this time scale, which is traceable to the International System (SI) of units, through international comparisons that are made in real time.

10 CFR 835.209 - Concentrations of radioactive material in air.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Section 835.209 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Standards for Internal and External Exposure § 835.209 Concentrations of radioactive material in air. (a) The derived air... exposures to airborne radioactive material. (b) The estimation of internal dose shall be based on bioassay...

Internal Medicine House Officers' Performance as Assessed by Experts and Standardized Patients.

ERIC Educational Resources Information Center

Calhoun, Judith G.; And Others

1987-01-01

Three chronically ill patients were trained to evaluate the performance of 31 second-year internal medicine house officers based upon: a checklist for the medical data elicited during the medical interview; the process of the interview; and the physical examination technique. (Author/MLW)

Microsatellite Imputation for parental verification from SNP across multiple Bos taurus and indicus breeds

USDA-ARS?s Scientific Manuscript database

Microsatellite markers (MS) have traditionally been used for parental verification and are still the international standard in spite of their higher cost, error rate, and turnaround time compared with Single Nucleotide Polymorphisms (SNP)-based assays. Despite domestic and international demands fro...

Multicultural Alliance of Behavior Analysis Standards for Cultural Competence in Behavior Analysis

ERIC Educational Resources Information Center

Fong, Elizabeth Hughes; Tanaka, Sakurako

2013-01-01

The United States Census bureau projects there will be significant increases in racial and ethnic diversity over the next four decades, in part due to international migration (Guarneri & Ortman, 2009). Due to the increase in culturally diverse populations working within the framework of behavior analysis, clinicians must ensure that they are…

Defining the value framework for prostate brachytherapy using patient-centered outcome metrics and time-driven activity-based costing.

PubMed

Thaker, Nikhil G; Pugh, Thomas J; Mahmood, Usama; Choi, Seungtaek; Spinks, Tracy E; Martin, Neil E; Sio, Terence T; Kudchadker, Rajat J; Kaplan, Robert S; Kuban, Deborah A; Swanson, David A; Orio, Peter F; Zelefsky, Michael J; Cox, Brett W; Potters, Louis; Buchholz, Thomas A; Feeley, Thomas W; Frank, Steven J

2016-01-01

Value, defined as outcomes over costs, has been proposed as a measure to evaluate prostate cancer (PCa) treatments. We analyzed standardized outcomes and time-driven activity-based costing (TDABC) for prostate brachytherapy (PBT) to define a value framework. Patients with low-risk PCa treated with low-dose-rate PBT between 1998 and 2009 were included. Outcomes were recorded according to the International Consortium for Health Outcomes Measurement standard set, which includes acute toxicity, patient-reported outcomes, and recurrence and survival outcomes. Patient-level costs to 1 year after PBT were collected using TDABC. Process mapping and radar chart analyses were conducted to visualize this value framework. A total of 238 men were eligible for analysis. Median age was 64 (range, 46-81). Median followup was 5 years (0.5-12.1). There were no acute Grade 3-5 complications. Expanded Prostate Cancer Index Composite 50 scores were favorable, with no clinically significant changes from baseline to last followup at 48 months for urinary incontinence/bother, bowel bother, sexual function, and vitality. Ten-year outcomes were favorable, including biochemical failure-free survival of 84.1%, metastasis-free survival 99.6%, PCa-specific survival 100%, and overall survival 88.6%. TDABC analysis demonstrated low resource utilization for PBT, with 41% and 10% of costs occurring in the operating room and with the MRI scan, respectively. The radar chart allowed direct visualization of outcomes and costs. We successfully created a visual framework to define the value of PBT using the International Consortium for Health Outcomes Measurement standard set and TDABC costs. PBT is associated with excellent outcomes and low costs. Widespread adoption of this methodology will enable value comparisons across providers, institutions, and treatment modalities. Copyright © 2016 American Brachytherapy Society. Published by Elsevier Inc. All rights reserved.

Lack of transferability between two automated immunoassays for serum IGF-I measurement.

PubMed

Gomez-Gomez, Carolina; Iglesias, Eva M; Barallat, Jaume; Moreno, Fernando; Biosca, Carme; Pastor, Mari-Cruz; Granada, Maria-Luisa

2014-01-01

IGF-I is a clinically relevant protein in the diagnosis and monitoring of treatment of growth disor- ders. The Growth Hormone Research Society and the International IGF Research Society have encouraged the adoption of a universal calibration for immunoassays to improve standardization of IGF-I measurements, but currently commercial assays are calibrated either against the old WHO IRR 87/518 or the new WHO 02/254. We compared two IGF-I immunochemiluminescent assays: IMMULITE® 2000 (Siemens) and LIAISON® (DiaSorin), which differ in their standardization, and verified their precision according to quality specifications based on biological variation and their linear range. 62 patient serum samples were analyzed for both assays and compared according to standards of the Clinical and Laboratory Standards Institute (CLSI), EP9-A2-IR. Precision was verified according to CLSI EP15- A2. Optimal coefficient of variation (CVo) and desirable coefficient of variation (CVd) for IGF-I assays were calculated as quality specifications based on the biological variability, in order to assess if the interassay analytical CV (CVa1) in the two methods were appropriate. Two dilution series using the 1st WHO International Standard (WHO IS) for IGF-I 02/254 were used to verify and compare the linearity range. The regression analysis showed constant and proportional differences for serum samples (slope b = 0.8115 (CI 95% CI; 0.7575-0.8556); intercept a = 33.6873 (95% CI: 23.3613-44.0133) between assays and similar pro- portional differences for WHO IS 02/254 standard dilutions series (slope b = 0.8024 (CI 95% CI; 0.7560-0.8616); intercept a = 6.9623 (95% CI: -2.0819-18.4383) between assays. Within-laboratory coefficients of variation for low and high levels were 2.82% and 3.80% for IMMULITE® 2000 and 3.58% and 2.14% for LIAISON®, respecttively. IGF-I concentrations measured by both assays are not transferable. The results emphasize the need to express IGF-I concentrations in standard deviation score (SDS) according to a matched normal population of the same age and gender. Within-laboratory precision in both methods met quality specifications derived from biological variation.

Protecting the rights of producers original medicines.

PubMed

Pashkov, Vitalii; Kotvitska, Alla; Noha, Petro

the article analyzes the state of protection of intellectual property rights of original medicine producers, its accordance with international standards. Attention is focused on the importance of exclusivity of medicine market. the analysis of protection of intellectual property rights of medicine producers in Ukraine and determination of its conformity or non-conformity to the international standards. the experience of certain countries is analyzed in the research. Additionally, we used statistical data of international organizations, conclusions of experts. there are numerous cases of state registration of generic medicinal products using the registration information of original medicinal products and delict of the rights of patent holders. an effective mechanism of judicial protection of the original medicine producers` intellectual property rights from disorders that affect the profit was elaborated in Ukraine.

Validation of cell-based fluorescence assays: practice guidelines from the ICSH and ICCS - part I - rationale and aims.

PubMed

Davis, Bruce H; Wood, Brent; Oldaker, Teri; Barnett, David

2013-01-01

Flow cytometry and other technologies of cell-based fluorescence assays are as a matter of good laboratory practice required to validate all assays, which when in clinical practice may pass through regulatory review processes using criteria often defined with a soluble analyte in plasma or serum samples in mind. Recently the U.S. Food and Drug Administration (FDA) has entered into a public dialogue in the U.S. regarding their regulatory interest in laboratory developed tests (LDTs) or so-called "home brew" assays performed in clinical laboratories. The absence of well-defined guidelines for validation of cell-based assays using fluorescence detection has thus become a subject of concern for the International Council for Standardization of Haematology (ICSH) and International Clinical Cytometry Society (ICCS). Accordingly, a group of over 40 international experts in the areas of test development, test validation, and clinical practice of a variety of assay types using flow cytometry and/or morphologic image analysis were invited to develop a set of practical guidelines useful to in vitro diagnostic (IVD) innovators, clinical laboratories, regulatory scientists, and laboratory inspectors. The focus of the group was restricted to fluorescence reporter reagents, although some common principles are shared by immunohistochemistry or immunocytochemistry techniques and noted where appropriate. The work product of this two year effort is the content of this special issue of this journal, which is published as 5 separate articles, this being Validation of Cell-based Fluorescence Assays: Practice Guidelines from the ICSH and ICCS - Part I - Rationale and aims. © 2013 International Clinical Cytometry Society. © 2013 International Clinical Cytometry Society.

Do We Need a Single Standard of Value for Institutional Assessment? An Essay Response to Asao Inoue's "Community-Based Assessment Pedagogy"

ERIC Educational Resources Information Center

Elbow, Peter

2006-01-01

Inoue [Inoue, A. B. (2005). "Community-based assessment pedagogy." "Assessing Writing: An International Journal, 3", 208-238] sets up a radically experimental writing class as a kind of laboratory of assessment. He seeks to avoid the standard situation where a teacher unilaterally assesses and grades student writing, using only his or her own…

76 FR 32933 - International Standard-Setting Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-07

... or re-evaluation by JECFA. Proposed amendments to the Risk Analysis Principles for CCRVDF for comments and consideration at the next session. Proposed revision of Risk Analysis Principles Applied by... the Classification of Foods and Animal Feeds: Tree Nuts, Herbs and Spices. Draft Principle and...

Conjoint analysis applications in health--a checklist: a report of the ISPOR Good Research Practices for Conjoint Analysis Task Force.

PubMed

Bridges, John F P; Hauber, A Brett; Marshall, Deborah; Lloyd, Andrew; Prosser, Lisa A; Regier, Dean A; Johnson, F Reed; Mauskopf, Josephine

2011-06-01

The application of conjoint analysis (including discrete-choice experiments and other multiattribute stated-preference methods) in health has increased rapidly over the past decade. A wider acceptance of these methods is limited by an absence of consensus-based methodological standards. The International Society for Pharmacoeconomics and Outcomes Research (ISPOR) Good Research Practices for Conjoint Analysis Task Force was established to identify good research practices for conjoint-analysis applications in health. The task force met regularly to identify the important steps in a conjoint analysis, to discuss good research practices for conjoint analysis, and to develop and refine the key criteria for identifying good research practices. ISPOR members contributed to this process through an extensive consultation process. A final consensus meeting was held to revise the article using these comments, and those of a number of international reviewers. Task force findings are presented as a 10-item checklist covering: 1) research question; 2) attributes and levels; 3) construction of tasks; 4) experimental design; 5) preference elicitation; 6) instrument design; 7) data-collection plan; 8) statistical analyses; 9) results and conclusions; and 10) study presentation. A primary question relating to each of the 10 items is posed, and three sub-questions examine finer issues within items. Although the checklist should not be interpreted as endorsing any specific methodological approach to conjoint analysis, it can facilitate future training activities and discussions of good research practices for the application of conjoint-analysis methods in health care studies. Copyright © 2011 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

A simple method for the analysis by MS/MS of underivatized amino acids on dry blood spots from newborn screening.

PubMed

Wang, Chunyan; Zhang, Wenyan; Song, Fengrui; Liu, Zhiqiang; Liu, Shuying

2012-05-01

The analysis by electrospray-ionization tandem mass spectrometry of amino acids with butyl esterification and isotopically labeled internal standard is routine in newborn screening laboratories worldwide. In the present study, we established a direct analysis method of higher accuracy that uses a non-deuterated internal standard. The automatic sampler and the pump of an LC apparatus were used to inject sample and mobile phase to MS, but no LC column was needed. The dry blood spot (DBS) material was prepared at levels of low, medium and high concentration; the running time was 1 min. In parallel to the new procedure, we applied the established method to analyze nine amino acids on DBS of healthy newborns and phenylketonuria newborns. The newly proposed method of product ion confirmation scan along with multiple reaction monitoring resulted in a very accurate identification of each amino acid. Our innovative protocol had high sensitivity and specificity in the analysis of cases of suspected metabolic diseases.

The satisfactory growth and development at 2 years of age of the INTERGROWTH-21st Fetal Growth Standards cohort support its appropriateness for constructing international standards.

PubMed

Villar, José; Cheikh Ismail, Leila; Staines Urias, Eleonora; Giuliani, Francesca; Ohuma, Eric O; Victora, Cesar G; Papageorghiou, Aris T; Altman, Douglas G; Garza, Cutberto; Barros, Fernando C; Puglia, Fabien; Ochieng, Roseline; Jaffer, Yasmin A; Noble, Julia A; Bertino, Enrico; Purwar, Manorama; Pang, Ruyan; Lambert, Ann; Chumlea, Cameron; Stein, Alan; Fernandes, Michelle; Bhutta, Zulfiqar A; Kennedy, Stephen H

2018-02-01

The World Health Organization recommends that human growth should be monitored with the use of international standards. However, in obstetric practice, we continue to monitor fetal growth using numerous local charts or equations that are based on different populations for each body structure. Consistent with World Health Organization recommendations, the INTERGROWTH-21 st Project has produced the first set of international standards to date pregnancies; to monitor fetal growth, estimated fetal weight, Doppler measures, and brain structures; to measure uterine growth, maternal nutrition, newborn infant size, and body composition; and to assess the postnatal growth of preterm babies. All these standards are based on the same healthy pregnancy cohort. Recognizing the importance of demonstrating that, postnatally, this cohort still adhered to the World Health Organization prescriptive approach, we followed their growth and development to the key milestone of 2 years of age. The purpose of this study was to determine whether the babies in the INTERGROWTH-21 st Project maintained optimal growth and development in childhood. In the Infant Follow-up Study of the INTERGROWTH-21 st Project, we evaluated postnatal growth, nutrition, morbidity, and motor development up to 2 years of age in the children who contributed data to the construction of the international fetal growth, newborn infant size and body composition at birth, and preterm postnatal growth standards. Clinical care, feeding practices, anthropometric measures, and assessment of morbidity were standardized across study sites and documented at 1 and 2 years of age. Weight, length, and head circumference age- and sex-specific z-scores and percentiles and motor development milestones were estimated with the use of the World Health Organization Child Growth Standards and World Health Organization milestone distributions, respectively. For the preterm infants, corrected age was used. Variance components analysis was used to estimate the percentage variability among individuals within a study site compared with that among study sites. There were 3711 eligible singleton live births; 3042 children (82%) were evaluated at 2 years of age. There were no substantive differences between the included group and the lost-to-follow up group. Infant mortality rate was 3 per 1000; neonatal mortality rate was 1.6 per 1000. At the 2-year visit, the children included in the INTERGROWTH-21 st Fetal Growth Standards were at the 49th percentile for length, 50th percentile for head circumference, and 58th percentile for weight of the World Health Organization Child Growth Standards. Similar results were seen for the preterm subgroup that was included in the INTERGROWTH-21 st Preterm Postnatal Growth Standards. The cohort overlapped between the 3rd and 97th percentiles of the World Health Organization motor development milestones. We estimated that the variance among study sites explains only 5.5% of the total variability in the length of the children between birth and 2 years of age, although the variance among individuals within a study site explains 42.9% (ie, 8 times the amount explained by the variation among sites). An increase of 8.9 cm in adult height over mean parental height is estimated to occur in the cohort from low-middle income countries, provided that children continue to have adequate health, environmental, and nutritional conditions. The cohort enrolled in the INTERGROWTH-21 st standards remained healthy with adequate growth and motor development up to 2 years of age, which supports its appropriateness for the construction of international fetal and preterm postnatal growth standards. Copyright © 2017 The Author(s). Published by Elsevier Inc. All rights reserved.

Sensory characteristics of liquids thickened with commercial thickeners to levels specified in the International Dysphagia Diet Standardization Initiative (IDDSI) framework.

PubMed

Ong, Jane Jun-Xin; Steele, Catriona M; Duizer, Lisa M

2018-06-01

Sensory characteristics are important for the acceptance of thickened liquids, but those of liquids thickened to the new standards put forth by the International Dysphagia Diet Standardization Initiative (IDDSI) are unknown. This research sought to identify and rate the perception of important sensory properties of liquids thickened to levels specified in the IDDSI framework. Samples were made with water, with and without added barium sulfate, and were thickened with a cornstarch or xanthan gum based thickener. Samples were characterized using projective mapping/ultra-flash profiling to identify important sample attributes, and then with trained descriptive analysis panels to characterize those attributes in non-barium and barium thickened liquids. Three main groups of attributes were observed. Taste and flavor attributes decreased in intensity with increasing thickener. Thickener specific attributes included graininess and chalkiness for the cornstarch thickened samples, and slipperiness for the xanthan gum samples. Within the same type of thickener, ratings of thickness-related attributes (perceived viscosity, adhesiveness, manipulation, and swallowing) at different IDDSI levels were significantly different from each other. However, in non-barium samples, cornstarch samples were perceived as thicker than xanthan gum samples even though they had similar apparent viscosities at 50 s -1 . On the other hand, the two thickeners had similar perceived thickness in the barium samples even though the apparent viscosities of cornstarch samples were higher than those of the xanthan gum samples. In conclusion, IDDSI levels can be distinguished based on sensory properties, but these properties may be affected by the type of thickener and medium being thickened.

Use of laser ablation-inductively coupled plasma-time of flight-mass spectrometry to identify the elemental composition of vanilla and determine the geographic origin by discriminant function analysis.

PubMed

Hondrogiannis, Ellen M; Ehrlinger, Erin; Poplaski, Alyssa; Lisle, Meredith

2013-11-27

A total of 11 elements found in 25 vanilla samples from Uganda, Madagascar, Indonesia, and Papua New Guinea were measured by laser ablation-inductively coupled plasma-time-of-flight-mass spectrometry (LA-ICP-TOF-MS) for the purpose of collecting data that could be used to discriminate among the origins. Pellets were prepared of the samples, and elemental concentrations were obtained on the basis of external calibration curves created using five National Institute of Standards and Technology (NIST) standards and one Chinese standard with (13)C internal standardization. These curves were validated using NIST 1573a (tomato leaves) as a check standard. Discriminant analysis was used to successfully classify the vanilla samples by their origin. Our method illustrates the feasibility of using LA-ICP-TOF-MS with an external calibration curve for high-throughput screening of spice screening analysis.

On certain development aspects of an ipsas-based system-target approach to evaluation of net asset sustainability level projects in high-rise construction

NASA Astrophysics Data System (ADS)

Kazaryan, Ruben

2018-03-01

Problems of accounting and reporting of net assets and the procedure of their formation taking into account the specifics of the economic and legal status of property of a non-commercial autonomous institution are some of the most controversial in the accounting for entities of the public sector. The study focuses on justification of accounting rules for net assets of public sector entities. The methods used in the study are as follows: comparison, synthesis, analysis, logical approach, and system approach. The article examines legal aspects and specifics of recognition of assets of public sector entities in accordance with IPSAS standards (International Public Sector Accounting Standards are a set of accounting standards issued by IPSASB (Council for International Financial Reporting Standards for Public Sector Organizations) used by state-owned enterprises worldwide in preparation of financial statements as of the 31st of August, 2015. The most crucial factor in the modeling of key performance indicators of the system-target approach to estimation of the sustainability level of net assets on the basis of IPSAS is a multicriterial evaluation of the basic management strategy for quality system elements used in operational and strategic planning projects operations in high-rise construction. We offer an alternative evaluation of assets due to be returned to the right holder (the state controller) in the event of liquidation of a public sector entity.

Stable isotope labeling by essential nutrients in cell culture for preparation of labeled coenzyme A and its thioesters.

PubMed

Basu, Sankha S; Mesaros, Clementina; Gelhaus, Stacy L; Blair, Ian A

2011-02-15

Stable isotope dilution mass spectrometry (MS) represents the gold standard for quantification of endogenously formed cellular metabolites. Although coenzyme A (CoA) and acyl-CoA thioester derivatives are central players in numerous metabolic pathways, the lack of a commercially available isotopically labeled CoA limits the development of rigorous MS-based methods. In this study, we adapted stable isotope labeling by amino acids in cell culture (SILAC) methodology to biosynthetically generate stable isotope labeled CoA and thioester analogues for use as internal standards in liquid chromatography/multiple reaction monitoring mass spectrometry (LC/MRM-MS) assays. This was accomplished by incubating murine hepatocytes (Hepa 1c1c7) in media in which pantothenate (a precursor of CoA) was replaced with [(13)C(3)(15)N(1)]-pantothenate. Efficient incorporation into various CoA species was optimized to >99% [(13)C(3)(15)N(1)]-pantothenate after three passages of the murine cells in culture. Charcoal-dextran-stripped fetal bovine serum (FBS) was found to be more efficient for serum supplementation than dialyzed or undialyzed FBS, due to lower contaminating unlabeled pantothenate content. Stable isotope labeled CoA species were extracted and utilized as internal standards for CoA thioester analysis in cell culture models. This methodology of stable isotope labeling by essential nutrients in cell culture (SILEC) can serve as a paradigm for using vitamins and other essential nutrients to generate stable isotope standards that cannot be readily synthesized.

Bringing Standardized Processes in Atom-Probe Tomography: I Establishing Standardized Terminology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, Ian M; Danoix, F; Forbes, Richard

2011-01-01

Defining standardized methods requires careful consideration of the entire field and its applications. The International Field Emission Society (IFES) has elected a Standards Committee, whose task is to determine the needed steps to establish atom-probe tomography as an accepted metrology technique. Specific tasks include developing protocols or standards for: terminology and nomenclature; metrology and instrumentation, including specifications for reference materials; test methodologies; modeling and simulations; and science-based health, safety, and environmental practices. The Committee is currently working on defining terminology related to atom-probe tomography with the goal to include terms into a document published by the International Organization for Standardsmore » (ISO). A lot of terms also used in other disciplines have already been defined) and will be discussed for adoption in the context of atom-probe tomography.« less

Design of a Competency Evaluation Model for Clinical Nursing Practicum, Based on Standardized Language Systems: Psychometric Validation Study.

PubMed

Iglesias-Parra, Maria Rosa; García-Guerrero, Alfonso; García-Mayor, Silvia; Kaknani-Uttumchandani, Shakira; León-Campos, Álvaro; Morales-Asencio, José Miguel

2015-07-01

To develop an evaluation system of clinical competencies for the practicum of nursing students based on the Nursing Interventions Classification (NIC). Psychometric validation study: the first two phases addressed definition and content validation, and the third phase consisted of a cross-sectional study for analyzing reliability. The study population was undergraduate nursing students and clinical tutors. Through the Delphi technique, 26 competencies and 91 interventions were isolated. Cronbach's α was 0.96. Factor analysis yielded 18 factors that explained 68.82% of the variance. Overall inter-item correlation was 0.26, and total-item correlation ranged between 0.66 and 0.19. A competency system for the nursing practicum, structured on the NIC, is a reliable method for assessing and evaluating clinical competencies. Further evaluations in other contexts are needed. The availability of standardized language systems in the nursing discipline supposes an ideal framework to develop the nursing curricula. © 2015 Sigma Theta Tau International.

Optimized, Fast-Throughput UHPLC-DAD Based Method for Carotenoid Quantification in Spinach, Serum, Chylomicrons, and Feces.

PubMed

Eriksen, Jane N; Madsen, Pia L; Dragsted, Lars O; Arrigoni, Eva

2017-02-01

An improved UHPLC-DAD-based method was developed and validated for quantification of major carotenoids present in spinach, serum, chylomicrons, and feces. Separation was achieved with gradient elution within 12.5 min for six dietary carotenoids and the internal standard, echinenone. The proposed method provides, for all standard components, resolution > 1.1, linearity covering the target range (R > 0.99), LOQ < 0.035 mg/L, and intraday and interday RSDs < 2 and 10%, respectively. Suitability of the method was tested on biological matrices. Method precision (RSD%) for carotenoid quantification in serum, chylomicrons, and feces was below 10% for intra- and interday analysis, except for lycopene. Method accuracy was consistent with mean recoveries ranging from 78.8 to 96.9% and from 57.2 to 96.9% for all carotenoids, except for lycopene, in serum and feces, respectively. Additionally, an interlaboratory validation study on spinach at two institutions showed no significant differences in lutein or β-carotene content, when evaluated on four occasions.

An in-advance stable isotope labeling strategy for relative analysis of multiple acidic plant hormones in sub-milligram Arabidopsis thaliana seedling and a single seed.

PubMed

Sun, Xiaohong; Ouyang, Yue; Chu, Jinfang; Yan, Jing; Yu, Yan; Li, Xiaoqiang; Yang, Jun; Yan, Cunyu

2014-04-18

A sensitive and reliable in-advance stable isotope labeling strategy was developed for simultaneous relative quantification of 8 acidic plant hormones in sub-milligram amount of plant materials. Bromocholine bromide (BETA) and its deuterated counterpart D9-BETA were used to in-advance derivatize control and sample extracts individually, which were then combined and subjected to solid-phase extraction (SPE) purification followed by UPLC-MS/MS analysis. Relative quantification of target compounds was obtained by calculation of the peak area ratios of BETA/D9-BETA labeled plant hormones. The in-advance stable isotope labeling strategy realized internal standard-based relative quantification of multiple kinds of plant hormones independent of availability of internal standard of every analyte with enhanced sensitivity of 1-3 orders of magnitude. Meanwhile, the in-advance labeling contributes to higher sample throughput and more reliability. The method was successfully applied to determine 8 plant hormones in 0.8mg DW (dry weight) of seedlings and 4 plant hormones from single seed of Arabidopsis thaliana. The results show the potential of the method in relative quantification of multiple plant hormones in tiny plant tissues or organs, which will advance the knowledge of the crosstalk mechanism of plant hormones. Copyright © 2014 Elsevier B.V. All rights reserved.

Separation and quantitation of three acidic herbicide residues in tobacco and soil by dispersive solid-phase extraction and UPLC-MS/MS.

PubMed

Xiong, Wei; Tao, Xiaoqiu; Pang, Su; Yang, Xue; Tang, GangLing; Bian, Zhaoyang

2014-01-01

A method for the determination of three acidic herbicides, dicamba, 2,4-dichlorophenoxyacetic acid (2,4-D) and 2,4,5-trichlorophenoxyacetic acid (2,4,5-T) in tobacco and soil has been developed based on the use of liquid-liquid extraction and dispersive solid-phase extraction (dispersive-SPE) followed by UPLC-MS/MS. Two percentage of (v/v) formic acid in acetonitrile as the extraction helped partitioning of analytes into the acetonitrile phase. The extract was then cleaned up by dispersive-SPE using primary secondary amine as selective sorbents. Quantitative analysis was done in the multiple-reaction monitoring mode using stable isotope-labeled internal standards for each compound. A separate internal standard for each analyte is required to minimize sample matrix effects on each analyte, which can lead to poor analyte recoveries and decreases in method accuracy and precision. The total analysis time was <4 min. The linear range of the method was from 1 to 100 ng mL(-1) with a limit of detection of each herbicide varied from 0.012 to 0.126 ng g(-1). The proposed method is faster, more sensitive and selective than the traditional methods and more accurate and robust than the published LC-MS/MS methods. © The Author [2013]. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Quantitative analysis of polypeptide pharmaceuticals by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry.

PubMed

Amini, Ahmad; Nilsson, Elin

2008-02-13

An accurate method based on matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) has been developed for quantitative analysis of calcitonin and insulin in different commercially available pharmaceutical products. Tryptic peptides derived from these polypeptides were chemically modified at their C-terminal lysine-residues with 2-methoxy-4,5-dihydro-imidazole (light tagging) as standard and deuterated 2-methoxy-4,5-dihydro-imidazole (heavy tagging) as internal standard (IS). The heavy modified tryptic peptides (4D-Lys tag), differed by four atomic mass units from the corresponding light labelled counterparts (4H-Lys tag). The normalized peak areas (the ratio between the light and heavy tagged peptides) were used to construct a standard curve to determine the concentration of the analytes. The concentrations of calcitonin and insulin content of the analyzed pharmaceutical products were accurately determined, and less than 5% error was obtained between the present method and the manufacturer specified values. It was also found that the cysteine residues in CSNLSTCVLGK from tryptic calcitonin were converted to lanthionine by the loss of one sulfhydryl group during the labelling procedure.

Networking standards

NASA Technical Reports Server (NTRS)

Davies, Mark

1991-01-01

The enterprise network is currently a multivendor environment consisting of many defacto and proprietary standards. During the 1990s, these networks will evolve towards networks which are based on international standards in both Local Area Network (LAN) and Wide Area Network (WAN) space. Also, you can expect to see the higher level functions and applications begin the same transition. Additional information is given in viewgraph form.

[The validation of kit of reagents for quantitative detection of DNA of human cytomegalovirus in biological material using polymerase chain reaction technique in real time operation mode].

PubMed

Sil'veĭstrova, O Iu; Domonova, É A; Shipulina, O Iu

2014-04-01

The validation of kit of reagents destined to detection and quantitative evaluation of DNA of human cytomegalovirus in biological material using polymerase chain reaction technique in real time operation mode was implemented. The comparison was made against international WHO standard--The first WHO international standard for human cytomegalovirus to implement measures the kit of reagents "AmpliSens CMV-screen/monitor-FL" and standard sample of enterprise DNA HCMV (The central research institute of epidemiology of Rospotrebnadzor) was applied. The fivefold dilution of international WHO standard and standard sample of enterprise were carried out in concentrations of DNA HCMV from 106 to 102. The arrangement of polymerase chain reaction and analysis of results were implemented using programed amplifier with system of detection of fluorescent signal in real-time mode "Rotor-Gene Q" ("Qiagen", Germany). In the total of three series of experiments, all stages of polymerase chain reaction study included, the coefficient of translation of quantitative evaluation of DNA HCMV from copy/ml to ME/ml equal to 0.6 was introduced for this kit of reagents.

World Health Organization International Standard to harmonize assays for detection of hepatitis E virus RNA.

PubMed

Baylis, Sally A; Blümel, Johannes; Mizusawa, Saeko; Matsubayashi, Keiji; Sakata, Hidekatsu; Okada, Yoshiaki; Nübling, C Micha; Hanschmann, Kay-Martin O

2013-05-01

Nucleic acid amplification technique-based assays are a primary method for the detection of acute hepatitis E virus (HEV) infection, but assay sensitivity can vary widely. To improve interlaboratory results for the detection and quantification of HEV RNA, a candidate World Health Organization (WHO) International Standard (IS) strain was evaluated in a collaborative study involving 23 laboratories from 10 countries. The IS, code number 6329/10, was formulated by using a genotype 3a HEV strain from a blood donation, diluted in pooled human plasma and lyophilized. A Japanese national standard, representing a genotype 3b HEV strain, was prepared and evaluated in parallel. The potencies of the standards were determined by qualitative and quantitative assays. Assay variability was substantially reduced when HEV RNA concentrations were expressed relative to the IS. Thus, WHO has established 6329/10 as the IS for HEV RNA, with a unitage of 250,000 International Units per milliliter.

Validation of an isotope dilution, ICP-MS method based on internal mass bias correction for the determination of trace concentrations of Hg in sediment cores.

PubMed

Ciceri, E; Recchia, S; Dossi, C; Yang, L; Sturgeon, R E

2008-01-15

The development and validation of a method for the determination of mercury in sediments using a sector field inductively coupled plasma mass spectrometer (SF-ICP-MS) for detection is described. The utilization of isotope dilution (ID) calibration is shown to solve analytical problems related to matrix composition. Mass bias is corrected using an internal mass bias correction technique, validated against the traditional standard bracketing method. The overall analytical protocol is validated against NRCC PACS-2 marine sediment CRM. The estimated limit of detection is 12ng/g. The proposed procedure was applied to the analysis of a real sediment core sampled to a depth of 160m in Lake Como, where Hg concentrations ranged from 66 to 750ng/g.

Acetylcholinesterase Immobilized on Magnetic Beads for Pesticides Detection: Application to Olive Oil Analysis

PubMed Central

Ben Oujji, Najwa; Bakas, Idriss; Istamboulié, Georges; Ait-Ichou, Ihya; Ait-Addi, Elhabib; Rouillon, Régis; Noguer, Thierry

2012-01-01

This work presents the development of bioassays and biosensors for the detection of insecticides widely used in the treatment of olive trees. The systems are based on the covalent immobilisation of acetylcholinesterase on magnetic microbeads using either colorimetry or amperometry as detection technique. The magnetic beads were immobilised on screen-printed electrodes or microtitration plates and tested using standard solutions and real samples. The developed devices showed good analytical performances with limits of detection much lower than the maximum residue limit tolerated by international regulations, as well as a good reproducibility and stability. PMID:22969377

International Standards for Tuberculosis Care: revisiting the cornerstones of tuberculosis care and control.

PubMed

Fair, Elizabeth; Hopewell, Philip C; Pai, Madhukar

2007-02-01

Tuberculosis (TB) remains an enormous global health problem. There are 8-9 million new cases and 2 million deaths from TB annually. Despite the overwhelming burden of disease, the basic principles of care for persons with, or suspected of having, TB are the same worldwide: a diagnosis should be established promptly and accurately, standardized treatment regimens of proven efficacy should be used together with appropriate treatment support and supervision, the response to treatment should be monitored, and the essential public health responsibilities must be carried out. As an approach to improving the care of patients with TB, an evidence-based document, the International Standards for Tuberculosis Care (ISTC) was developed and has been endorsed by more than 30 international and national agencies. This special report introduces the ISTC and discusses the fact that accurate diagnosis and effective treatment are not only essential for good patient care, they are the key elements in the public health response to TB and are the cornerstone of TB control. With the recent emergence of extensively drug-resistant TB, there is an urgent need to ensure globally that standards of TB care are based on rigorous scientific findings, are clear and well understood, and are accessible to and applied by all types of healthcare providers in all corners of the world.

Aid conditionalities, international Good Manufacturing Practice standards and local production rights: a case study of local production in Nepal.

PubMed

Brhlikova, Petra; Harper, Ian; Subedi, Madhusudan; Bhattarai, Samita; Rawal, Nabin; Pollock, Allyson M

2015-06-14

Local pharmaceutical production has been endorsed by the WHO as a means of addressing health priorities of developing countries. However, local producers of essential medicines must comply with international pharmaceutical standards in order to be eligible to compete in donor tenders. These standards determine production rights for on-patent and off-patent medicines, and guide international procurement of medicines. We reviewed the literature on the impact of Good Manufacturing Practice (GMP) on local production; a gap analysis from the literature review indicated a need for further research. Over sixty interviews were conducted with people involved in the Nepali pharmaceutical production and distribution chain from 2006 to 2009 on the GMP areas of relevance: regulatory capacity, staffing, funding and training, resourcing of GMP, inspectors' interpretation of the rules and compliance. Although Nepal producers have increased their overall share of the domestic market, only the public manufacturer, Royal Drugs, focuses on medicines for public health programmes; private producers engage mainly in brand competition for private markets, not essential medicines. Nepali regulators and producers state that implementation of GMP standards is hindered by low regulatory capacity, insufficient training of staff in the industry, financial constraints and lack of investment for upgrading capital. The transition period to mandatory compliance with WHO GMP rules is lengthy. Less than half of private producers had WHO GMP in 2013. Producers are not directly affected by international harmonisation of standards as they do not export medicines and the Nepali regulator does not enforce the WHO standards strictly. Without an international GMP certificate they cannot tender for donor dependent health programmes. In Nepal, local private manufacturers focus mainly on brand competition for private consumption not essential medicines, the government preferentially procures essential medicines from the only public producer while donor funded programmes rely on international manufacturers compliant with international GMP standards. We also found evidence of private hospitals bypassing national medicines approvals process. Policies in support of local pharmaceutical production in developing countries as a source of essential medicines need to examine carefully how GMP regulations impact on regulators, local industry and production of essential medicines in practice.

Identifying deficiencies in national and foreign medical team responses through expert opinion surveys: implications for education and training.

PubMed

Djalali, Ahmadreza; Ingrassia, Pier Luigi; Corte, Francesco Della; Foletti, Marco; Gallardo, Alba Ripoll; Ragazzoni, Luca; Kaptan, Kubilay; Lupescu, Olivera; Arculeo, Chris; von Arnim, Gotz; Friedl, Tom; Ashkenazi, Michael; Heselmann, Deike; Hreckovski, Boris; Khorram-Manesh, Amir; Khorrram-Manesh, Amir; Komadina, Radko; Lechner, Kostanze; Patru, Cristina; Burkle, Frederick M; Fisher, Philipp

2014-08-01

Unacceptable practices in the delivery of international medical assistance are reported after every major international disaster; this raises concerns about the clinical competence and practice of some foreign medical teams (FMTs). The aim of this study is to explore and analyze the opinions of disaster management experts about potential deficiencies in the art and science of national and FMTs during disasters and the impact these opinions might have on competency-based education and training. This qualitative study was performed in 2013. A questionnaire-based evaluation of experts' opinions and experiences in responding to disasters was conducted. The selection of the experts was done using the purposeful sampling method, and the sample size was considered by data saturation. Content analysis was used to explore the implications of the data. This study shows that there is a lack of competency-based training for disaster responders. Developing and performing standardized training courses is influenced by shortcomings in budget, expertise, and standards. There is a lack of both coordination and integration among teams and their activities during disasters. The participants of this study emphasized problems concerning access to relevant resources during disasters. The major findings of this study suggest that teams often are not competent during the response phase because of education and training deficiencies. Foreign medical teams and medically related nongovernmental organizations (NGOs) do not always provide expected capabilities and services. Failures in leadership and in coordination among teams are also a problem. All deficiencies need to be applied to competency-based curricula.

Phase noise analysis of a 10-GHz optical injection-locked vertical-cavity surface-emitting laser-based optoelectronic oscillator

NASA Astrophysics Data System (ADS)

Coronel, Juan; Varón, Margarita; Rissons, Angélique

2016-09-01

The optical injection locking (OIL) technique is proposed to reduce the phase noise of a carrier generated for a vertical-cavity surface-emitting laser (VCSEL)-based optoelectronic oscillator. The OIL technique permits the enhancement of the VCSEL direct modulation bandwidth as well as the stabilization of the optical noise of the laser. A 2-km delay line, 10-GHz optical injection-locked VCSEL-based optoelectronic oscillator (OILVBO) was implemented. The internal noise sources of the optoelectronic oscillator components were characterized and analyzed to understand the noise conversion of the system into phase noise in the oscillator carrier. The implemented OILVBO phase noise was -105.7 dBc/Hz at 10 kHz from the carrier; this value agrees well with the performed simulated analysis. From the computed and measured phase noise curves, it is possible to infer the noise processes that take place inside the OILVBO. As a second measurement of the oscillation quality, a time-domain analysis was done through the Allan's standard deviation measurement, reported for first time for an optoelectronic oscillator using the OIL technique.

Demetalation of Fe, Mn, and Cu chelates and complexes: application to the NMR analysis of micronutrient fertilizers.

PubMed

López-Rayo, Sandra; Lucena, Juan J; Laghi, Luca; Cremonini, Mauro A

2011-12-28

The application of nuclear magnetic resonance (NMR) for the quality control of fertilizers based on Fe(3+), Mn(2+), and Cu(2+) chelates and complexes is precluded by the strong paramagnetism of metals. Recently, a method based on the use of ferrocyanide has been described to remove iron from commercial iron chelates based on the o,o-EDDHA [ethylenediamine-N,N'bis(2-hydroxyphenylacetic)acid] chelating agent for their analysis and quantification by NMR. The present work extended that procedure to other paramagnetic ions, manganese and copper, and other chelating, EDTA (ethylenediaminetetraacetic acid), IDHA [N-(1,2-dicarboxyethyl)-d,l-aspartic acid], and complexing agents, gluconate and heptagluconate. Results showed that the removal of the paramagnetic ions was complete, allowing us to obtain (1)H NMR spectra characterized by narrow peaks. The quantification of the ligands by NMR and high-performance liquid chromatography showed that their complete recovery was granted. The NMR analysis enabled detection and quantification of unknown impurities without the need of pure compounds as internal standards.

New International Reference Standards of Voltage and Resistance.

ERIC Educational Resources Information Center

Sirvastava, V. P.

1991-01-01

The introduction of the quantum standards of resistance and voltage, based on the Quantum Hall Effect (QHE) and the Josephson Effect, can be used to establish highly reproducible and uniform representations of the ohm and volt worldwide. Discussed are the QHE and the Josephson Effect. (KR)

Scientific Reporting: Raising the Standards

ERIC Educational Resources Information Center

McLeroy, Kenneth R.; Garney, Whitney; Mayo-Wilson, Evan; Grant, Sean

2016-01-01

This article is based on a presentation that was made at the 2014 annual meeting of the editorial board of "Health Education & Behavior." The article addresses critical issues related to standards of scientific reporting in journals, including concerns about external and internal validity and reporting bias. It reviews current…

[International regulation of ethics committees on biomedical research as protection mechanisms for people: analysis of the Additional Protocol to the Convention on Human Rights and Biomedicine, concerning Biomedical Research of the Council of Europe].

PubMed

de Lecuona, Itziar

2013-01-01

The article explores and analyses the content of the Council of Europe's Additional Protocol to the Convention on Human Rights and Biomedicine concerning Biomedical Research regarding the standard legal instrument in biomedical research, issued by an international organization with leadership in bioethics. This implies ethics committees are mechanisms of protection of humans in biomedical research and not mere bureaucratic agencies and that a sound inescapable international regulatory framework exists for States to regulate biomedical research. The methodology used focuses on the analysis of the background, the context in which it is made and the nature and scope of the Protocol. It also identifies and analyses the characteristics and functions of ethics committees in biomedical research and, in particular, the information that should be provided to this bodies to develop their functions previously, during and at the end of research projects. This analysis will provide guidelines, suggestions and conclusions for the awareness and training of members of these committees in order to influence the daily practice. This paper may also be of interest to legal practitioners who work in different areas of biomedical research. From this practical perspective, the article examines the legal treatment of the Protocol to meet new challenges and classic issues in research: the treatment of human biological samples, the use of placebos, avoiding double standards, human vulnerability, undue influence and conflicts of interest, among others. Also, from a critical view, this work links the legal responses to develop work procedures that are required for an effective performance of the functions assigned of ethics committees in biomedical research. An existing international legal response that lacks doctrinal standards and provides little support should, however, serve as a guide and standard to develop actions that allow ethics committees -as key bodies for States- to advance in the protection of humans in biomedical research.

The International System of Units and Its Use in Geography and Related Disciplines.

ERIC Educational Resources Information Center

Lee, Jeffrey A.

1995-01-01

Introduces college level geography students to the International System of Units (SI), a standardized set of units used in science, engineering, and commerce. Identifies the SI base units as meter, kilogram, second, kelvin, ampere, mole, and candela. Includes geographically relevant examples of each. (MJP)

A Systematic Review of Economic Analysis of Surgical Mission Trips Using the World Health Organization Criteria.

PubMed

Nolte, Michael T; Maroukis, Brianna L; Chung, Kevin C; Mahmoudi, Elham

2016-08-01

Although the World Health Organization (WHO) has developed tools to standardize economic evaluations of global health interventions, little is known about the cost-effectiveness of surgical mission trips and their economic values. Our objective was to systematically evaluate the current literature on surgical volunteering trips to measure their adherence to WHO CHOosing Interventions that are cost-effective (WHO-CHOICE). We hypothesized that the majority of studies use some type of cost-effectiveness analysis that do not adhere to these standards. A systematic review of Pubmed, Medline, and Embase databases was performed in accordance with PRISMA guidelines, with inclusion criteria set a priori. Of the 908 publications screened, 72 were selected for full text review; 17 met inclusion criteria. Only 17 out of 72 studies reported some type of economic analysis. We categorized the studies into service, educational, and combination (service and educational) surgical trips. Although seven of the service studies calculated the cost per disability-adjusted life year averted, the results were not based on WHO-CHOICE standards to facilitate comparisons among alternative options. Furthermore, none of the three educational trips calculated the value of the education provided, but only published cost estimates of the resources used during the trip. Although a few studies performed some type of economic analysis, owing to their non-adherence to WHO-CHOICE standards, the results were not comparable to other studies. International surgical trips are expensive. To improve the efficacy and optimal use of limited resources, studies on surgical trips should follow the guidelines set by the WHO-CHOICE.

Priorities for Standards and Measurements to Accelerate Innovations in Nano-Electrotechnologies: Analysis of the NIST-Energetics-IEC TC 113 Survey+,*

PubMed Central

Bennett, Herbert S.; Andres, Howard; Pellegrino, Joan; Kwok, Winnie; Fabricius, Norbert; Chapin, J. Thomas

2009-01-01

In 2008, the National Institute of Standards and Technology and Energetics Incorporated collaborated with the International Electrotechnical Commission Technical Committee 113 (IEC TC 113) on nano-electrotechnologies to survey members of the international nanotechnologies community about priorities for standards and measurements to accelerate innovations in nano-electrotechnologies. In this paper, we analyze the 459 survey responses from 45 countries as one means to begin building a consensus on a framework leading to nano-electrotechnologies standards development by standards organizations and national measurement institutes. The distributions of priority rankings from all 459 respondents are such that there are perceived distinctions with statistical confidence between the relative international priorities for the several items ranked in each of the following five Survey category types: 1) Nano-electrotechnology Properties, 2) Nano-electrotechnology Taxonomy: Products, 3) Nano-electrotechnology Taxonomy: Cross-Cutting Technologies, 4) IEC General Discipline Areas, and 5) Stages of the Linear Economic Model. The global consensus prioritizations for ranked items in the above five category types suggest that the IEC TC 113 should focus initially on standards and measurements for electronic and electrical properties of sensors and fabrication tools that support performance assessments of nano-technology enabled sub-assemblies used in energy, medical, and computer products. PMID:27504216

Collaborative study to assess the suitability of a candidate International Standard for yellow fever vaccine.

PubMed

Ferguson, Morag; Heath, Alan

2004-12-01

Yellow fever vaccines are routinely assayed by plaque assay. However, the results of these assays are then converted into mouse LD(50) using correlations/conversion factors which, in many cases, were established many years ago. The minimum required potency in WHO Recommendations is 10(3) LD(50)/dose. Thirteen participants from 8 countries participated in a collaborative study whose aim was to assess the suitability of two candidate preparations to serve as an International Standard for yellow fever vaccine. In addition, the study investigated the relationship between the mouse LD(50) test and plaque forming units with a view to updating the WHO recommendations. Plaque assays were more reproducible than mouse assays, as expected. Differences in sensitivities of plaque assays were observed between laboratories but these differences appear to be consistent within a laboratory for all samples and the expression of potency relative to the candidate standard vaccine improved the reproducibility of assays between laboratories. However, the use of potencies had little effect on the between laboratory variability in mouse LD(50) assays. There appears to be a consistent relationship between overall mean LD(50) and plaques titre for all study preparations other than sample E. The slope of the correlation curve is >1 and it would appear that 10(3) LD(50) is approximately equivalent to 10(4) plaque forming units (PFU), based on the overall means of all laboratory results. The First International Standard for yellow fever vaccine, NIBSC Code 99/616, has been established as the First International Standard for yellow fever vaccine by the Expert Committee of Biological Standards of the World Health Organisation. The International Standard has been arbitrarily assigned a potency of 10(4.5) International Units (IU) per ampoule. Manufacturers and National Control Laboratories are including the First International Standard for yellow fever vaccine in routine assays so that the minimum potency in IU of vaccines released for use and which meet the current minimum potency of 10(3) LD(50) in mouse assays, can be determined. These data will be analysed before a review of the WHO requirements, including the minimum potency per dose, is undertaken.

The role of stakeholders in developing an international regulatory framework for carbon capture and storage

NASA Astrophysics Data System (ADS)

Augustin, C. M.; Broad, K.; Swart, P. K.

2011-12-01

It is estimated that carbon capture and storage (CCS) could be used to achieve between 15% and 55% of the carbon emission reductions necessary to avoid dangerous levels of climate change. It is also believed that achieving emission reduction goals will be less costly with CCS than without it. The expansion of active CCS sites over the past decade, from three to 53 demonstrates the value that industry sees in CCS as a transition technology for governments seeking to reduce their CO2 emissions. However, to continue developing CCS for industry scale implementation, it is essential to provide the regulatory certainty needed to foster energy industry wide adoption of CCS. Existing CCS regulatory regimes are inadequate, fragmented and contradictory. There is a need for comprehensive, unifying regulations for CCS that are flexible enough to adapt as the technology develops. Governments are limited by the fact that carbon capture and storage is a multidisciplinary issue that touches on the fields of oil drilling, groundwater quality, greenhouse gas management, air quality, and risk management. Though it is in part a technological, environmental and management issue there is also a complex political element to tackling the CCS problem. Due to its cross-cutting nature, CCS regulations should be based off the best practices and standards developed by industry stakeholders. Industry standards are stakeholder developed and consensus based, created through a democratic and collaborative process by bodies such as the International Standards Organization, the National Institutes of Standards and Testing (USA), ASTM International, and the Canadian Standards Organization. Standards can typically be broken down into six general categories: test methods, specifications, classifications, practices, guides, and terminology. These standards are created by stakeholders across the industry and across geographic boundaries to create an trade-wide, rather than nationwide, consensus and ensuring that the standards are international in scope. This paper examines regulatory issues post-capture, particularly the transport and geological storage of carbon dioxide and seeks to identify areas where relevant stakeholders should collaborate to develop a comprehensive list of industry standards and provides several case study examples.

Quantifying and Addressing the DOE Material Reactivity Requirements with Analysis and Testing of Hydrogen Storage Materials & Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khalil, Y. F.

2012-04-30

The objective of this project is to examine safety aspects of candidate hydrogen storage materials and systems being developed in the DOE Hydrogen Program. As a result of this effort, the general DOE safety target will be given useful meaning by establishing a link between the characteristics of new storage materials and the satisfaction of safety criteria. This will be accomplished through the development and application of formal risk analysis methods, standardized materials testing, chemical reactivity characterization, novel risk mitigation approaches and subscale system demonstration. The project also will collaborate with other DOE and international activities in materials based hydrogenmore » storage safety to provide a larger, highly coordinated effort.« less

The Cultural Influence in Accounting Standard Setting: A Comparative Analysis of the United States, Canada, and England.

ERIC Educational Resources Information Center

Bloom, Robert; And Others

A study of the processes for establishing the principles and policies of measurement and disclosure in preparing financial reports examines differences in these processes in the United States, Canada, and England. Information was drawn from international accounting literature on standard setting. The differences and similarities in the…

A Checklist for Readiness Evaluation of Learning and Teaching Area of AACSB Standards

ERIC Educational Resources Information Center

Kundu, Goutam Kumar; Bairi, Jayachandra

2016-01-01

Purpose: The purpose of the paper is to introduce the concept of a checklist, focusing on the detailed analysis of requirements of the AACSB International--the Association to Advance Collegiate Schools of Business (AACSB) standards related to the learning and teaching area--for evaluation of implementation readiness in a business school setting.…

Standardization of Lower Secondary Civic Education and Inequality of the Civic and Political Engagement of Students

ERIC Educational Resources Information Center

Witschge, Jacqueline; van de Werfhorst, Herman G.

2016-01-01

In this paper, the relation between the standardization of civic education and the inequality of civic engagement is examined. Using data from the International Civic and Citizenship Education Study 2009 among early adolescents and Eurydice country-level data, three-level analysis and variance function regression are applied to examine whether…

Standardized Testing for Outcome Assessment: Analysis of the Educational Testing Systems MBA Tests

ERIC Educational Resources Information Center

Wright, Robert E.

2010-01-01

The use of standardized tests for outcome assessment has grown dramatically in recent years. Two driving factors have been the No Child Left Behind legislation, and the increase in outcome assessment measures by accrediting agencies such as AACSB, the international accrediting body for business schools. Despite the growth in usage, little effort…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Continuing the tradition established in prior years, this panel encompasses one of the broadest ranges of topics and issues of any panel at the Summer Study. It includes papers addressing all sectors, low-income residential to industrial, and views energy efficiency from many perspectives including programmatic, evaluation, codes, standards, legislation, technical transfer, economic development, and least-cost planning. The papers represent work being performed in most geographic regions of the United States and in the international arena, specifically Thailand, China, Europe, and Scandinavia. This delightful smorgasbord has been organized, based on general content area, into the following eight sessions: (1) new directionsmore » for low-income weatherization; (2) pursuing efficiency through legislation and standards; (3) international perspectives on energy efficiency; (4) technical transfer strategies; (5) government energy policy; (6) commercial codes and standards; (7) innovative programs; and, (8) state-of-the-art review. For these conference proceedings, individual papers are processed separately for the Energy Data Base.« less

Coals of Hungary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Landis, E.R.; Rohrbacher, T.J.; Gluskoter, H.

1999-07-01

As part of the activities conducted under the U.S. Hungarian Science and Technology Fund, a total of 39 samples from five coal mines in Hungary were selected for standard coal analyses and major, minor and trace elements analysis. The mine areas sampled were selected to provide a spectrum of coal quality information for comparison with other coal areas in central Europe and worldwide. All of the areas are of major importance in the energy budget of Hungary. The five sample sites contain coal in rocks of Jurassic, Cretaceous, Eocene, Miocene, and Pliocene age. The coals, from four underground and onemore » surface mine, range in rank from high volatile bituminous to lignite B. Most of the coal produced from the mines sampled is used to generate electricity. Some of the power plants that utilize the coals also provide heat for domestic and process usage. The standard coal analysis program is based on tests performed in accordance with standards of the American Society for Testing and Materials (ASTM). Proximate and ultimate analyses were supplemented by determinations of the heating value, equilibrium moisture, forms of sulfur, free-swelling index, ash fusion temperatures (both reducing and oxidizing), apparent specific gravity and Hardgrove Grindability index. The major, minor and trace element analyses were performed in accordance with standardized procedures of the U.S. Geological Survey. The analytical results will be available in the International Coal Quality Data Base of the USGS. The results of the program provide data for comparison with test data from Europe and information of value to potential investors or cooperators in the coal industry of Hungary and Central Europe.« less

Next Generation Science Partnerships

NASA Astrophysics Data System (ADS)

Magnusson, J.

2016-02-01

I will provide an overview of the Next Generation Science Standards (NGSS) and demonstrate how scientists and educators can use these standards to strengthen and enhance their collaborations. The NGSS are rich in content and practice and provide all students with an internationally-benchmarked science education. Using these state-led standards to guide outreach efforts can help develop and sustain effective and mutually beneficial teacher-researcher partnerships. Aligning outreach with the three dimensions of the standards can help make research relevant for target audiences by intentionally addressing the science practices, cross-cutting concepts, and disciplinary core ideas of the K-12 science curriculum that drives instruction and assessment. Collaborations between researchers and educators that are based on this science framework are more sustainable because they address the needs of both scientists and educators. Educators are better able to utilize science content that aligns with their curriculum. Scientists who learn about the NGSS can better understand the frameworks under which educators work, which can lead to more extensive and focused outreach with teachers as partners. Based on this model, the International Ocean Discovery Program (IODP) develops its education materials in conjunction with scientists and educators to produce accurate, standards-aligned activities and curriculum-based interactions with researchers. I will highlight examples of IODP's current, successful teacher-researcher collaborations that are intentionally aligned with the NGSS.

Professionalism in Vocational Education: International Perspectives

ERIC Educational Resources Information Center

Atkins, Liz; Tummons, Jonathan

2017-01-01

This paper explores notions of professionalism amongst vocational teachers in the United Kingdom and Australia, through an analysis of voluntarism/regulatory frameworks and professional body frameworks. In terms of empirical evidence, the paper reports on data drawn from a documentary analysis of government policy documents, standards for the…

Validation of cell-based fluorescence assays: practice guidelines from the ICSH and ICCS - part IV - postanalytic considerations.

PubMed

Barnett, David; Louzao, Raaul; Gambell, Peter; De, Jitakshi; Oldaker, Teri; Hanson, Curtis A

2013-01-01

Flow cytometry and other technologies of cell-based fluorescence assays are as a matter of good laboratory practice required to validate all assays, which when in clinical practice may pass through regulatory review processes using criteria often defined with a soluble analyte in plasma or serum samples in mind. Recently the U.S. Food and Drug Administration (FDA) has entered into a public dialogue in the U.S. regarding their regulatory interest in laboratory developed tests (LDTs) or so-called home brew assays performed in clinical laboratories. The absence of well-defined guidelines for validation of cell-based assays using fluorescence detection has thus become a subject of concern for the International Council for Standardization of Haematology (ICSH) and International Clinical Cytometry Society (ICCS). Accordingly, a group of over 40 international experts in the areas of test development, test validation, and clinical practice of a variety of assay types using flow cytometry and/or morphologic image analysis were invited to develop a set of practical guidelines useful to in vitro diagnostic (IVD) innovators, clinical laboratories, regulatory scientists, and laboratory inspectors. The focus of the group was restricted to fluorescence reporter reagents, although some common principles are shared by immunohistochemistry or immunocytochemistry techniques and noted where appropriate. The work product of this two year effort is the content of this special issue of this journal, which is published as 5 separate articles, this being Validation of Cell-based Fluorescence Assays: Practice Guidelines from the ICSH and ICCS - Part IV - Postanalytic considerations. © 2013 International Clinical Cytometry Society.

Researches of fruit quality prediction model based on near infrared spectrum

NASA Astrophysics Data System (ADS)

Shen, Yulin; Li, Lian

2018-04-01

With the improvement in standards for food quality and safety, people pay more attention to the internal quality of fruits, therefore the measurement of fruit internal quality is increasingly imperative. In general, nondestructive soluble solid content (SSC) and total acid content (TAC) analysis of fruits is vital and effective for quality measurement in global fresh produce markets, so in this paper, we aim at establishing a novel fruit internal quality prediction model based on SSC and TAC for Near Infrared Spectrum. Firstly, the model of fruit quality prediction based on PCA + BP neural network, PCA + GRNN network, PCA + BP adaboost strong classifier, PCA + ELM and PCA + LS_SVM classifier are designed and implemented respectively; then, in the NSCT domain, the median filter and the SavitzkyGolay filter are used to preprocess the spectral signal, Kennard-Stone algorithm is used to automatically select the training samples and test samples; thirdly, we achieve the optimal models by comparing 15 kinds of prediction model based on the theory of multi-classifier competition mechanism, specifically, the non-parametric estimation is introduced to measure the effectiveness of proposed model, the reliability and variance of nonparametric estimation evaluation of each prediction model to evaluate the prediction result, while the estimated value and confidence interval regard as a reference, the experimental results demonstrate that this model can better achieve the optimal evaluation of the internal quality of fruit; finally, we employ cat swarm optimization to optimize two optimal models above obtained from nonparametric estimation, empirical testing indicates that the proposed method can provide more accurate and effective results than other forecasting methods.

What skills should new internal medicine interns have in july? A national survey of internal medicine residency program directors.

PubMed

Angus, Steven; Vu, T Robert; Halvorsen, Andrew J; Aiyer, Meenakshy; McKown, Kevin; Chmielewski, Amy F; McDonald, Furman S

2014-03-01

The transition from medical student to intern may cause stress and burnout in new interns and the delivery of suboptimal patient care. Despite a formal set of subinternship curriculum guidelines, program directors have expressed concern regarding the skill set of new interns and the lack of standardization in that skill set among interns from different medical schools. To address these issues, the Accreditation Council for Graduate Medical Education's Next Accreditation System focuses on the development of a competency-based education continuum spanning undergraduate, graduate, and continuing medical education. In 2010, the Clerkship Directors in Internal Medicine subinternship task force, in collaboration with the Association of Program Directors in Internal Medicine survey committee, surveyed internal medicine residency program directors to determine which competencies or skills they expected from new medical school graduates. The authors summarized the results using categories of interest. In both an item rank list and free-text responses, program directors were nearly uniform in ranking the skills they deemed most important for new interns-organization and time management and prioritization skills; effective communication skills; basic clinical skills; and knowing when to ask for assistance. Stakeholders should use the results of this survey as they develop a milestone-based curriculum for the fourth year of medical school and for the internal medicine subinternship. By doing so, they should develop a standardized set of skills that meet program directors' expectations, reduce the stress of transitions across the educational continuum, and improve the quality of patient care.

Hepatitis E Virus (HEV) Detection and Quantification by a Real-Time Reverse Transcription-PCR Assay Calibrated to the World Health Organization Standard for HEV RNA

PubMed Central

Germer, Jeffrey J.; Ankoudinova, Irina; Belousov, Yevgeniy S.; Mahoney, Walt; Dong, Chen; Meng, Jihong; Mandrekar, Jayawant N.

2017-01-01

ABSTRACT Hepatitis E virus (HEV) has emerged as a cause of chronic hepatitis among immunocompromised patients. Molecular assays have become important tools for the diagnosis and management of these chronically infected patients. A real-time reverse transcription-quantitative PCR (RT-qPCR) assay utilizing Pleiades probe chemistry and an RNA internal control for the simultaneous detection and quantification of HEV RNA in human serum was developed based on an adaptation of a previously described and broadly reactive primer set targeting the overlapping open reading frame 2/3 (ORF2/3) nucleotide sequence of HEV. A chimeric bovine viral diarrhea virus construct containing an HEV RNA insert (SynTura HEV) was developed, value assigned with the first World Health Organization (WHO) international standard for HEV RNA (code 6329/10), and used to prepare working assay calibrators and controls, which supported an assay quantification range of 100 to 5,000,000 IU/ml. The analytical sensitivity (95% detection rate) of this assay was 25.2 IU/ml (95% confidence interval [CI], 19.2 to 44.1 IU/ml). The assay successfully amplified 16 different HEV sequences with significant nucleotide mismatching in primer/probe binding regions, while evaluation of a WHO international reference panel for HEV genotypes (code 8578/13) showed viral load results falling within the result ranges generated by WHO collaborative study participants for all panel members (genotypes 1 to 4). Broadly reactive RT-qPCR primers targeting HEV ORF2/3 were successfully adapted for use in an assay based on Pleiades probe chemistry. The availability of secondary standards calibrated to the WHO HEV international standard can improve the standardization and performance of assays for the detection and quantification of HEV RNA. PMID:28228493

A Consensus Set of Outcomes for Parkinson’s Disease from the International Consortium for Health Outcomes Measurement

PubMed Central

de Roos, Paul; Bloem, Bastiaan R.; Kelley, Thomas A.; Antonini, Angelo; Dodel, Richard; Hagell, Peter; Marras, Connie; Martinez-Martin, Pablo; Mehta, Shyamal H.; Odin, Per; Chaudhuri, Kallol Ray; Weintraub, Daniel; Wilson, Bil; Uitti, Ryan J.

2017-01-01

Background Parkinson’s disease (PD) is a progressive neurodegenerative condition that is expected to double in prevalence due to demographic shifts. Value-based healthcare is a proposed strategy to improve outcomes and decrease costs. To move towards an actual value-based health care system, condition-specific outcomes that are meaningful to patients are essential. Objective Propose a global consensus standard set of outcome measures for PD. Methods Established methods for outcome measure development were applied, as outlined and used previously by the International Consortium for Health Outcomes Measurement (ICHOM). An international group, representing both patients and experts from the fields of neurology, psychiatry, nursing, and existing outcome measurement efforts, was convened. The group participated in six teleconferences over a six-month period, reviewed existing data and practices, and ultimately proposed a standard set of measures by which patients should be tracked, and how often data should be collected. Results The standard set applies to all cases of idiopathic PD, and includes assessments of motor and non-motor symptoms, ability to work, PD-related health status, and hospital admissions. Baseline demographic and clinical variables are included to enable case mix adjustment. Conclusions The Standard Set is now ready for use and pilot testing in the clinical setting. Ultimately, we believe that using the set of outcomes proposed here will allow clinicians and scientists across the world to document, report, and compare PD-related outcomes in a standardized fashion. Such international benchmarks will improve our understanding of the disease course and allow for identification of ‘best practices’, ultimately leading to better informed treatment decisions. PMID:28671140

CODATA recommended values of the fundamental constants

NASA Astrophysics Data System (ADS)

Mohr, Peter J.; Taylor, Barry N.

2000-11-01

A review is given of the latest Committee on Data for Science and Technology (CODATA) adjustment of the values of the fundamental constants. The new set of constants, referred to as the 1998 values, replaces the values recommended for international use by CODATA in 1986. The values of the constants, and particularly the Rydberg constant, are of relevance to the calculation of precise atomic spectra. The standard uncertainty (estimated standard deviation) of the new recommended value of the Rydberg constant, which is based on precision frequency metrology and a detailed analysis of the theory, is approximately 1/160 times the uncertainty of the 1986 value. The new set of recommended values as well as a searchable bibliographic database that gives citations to the relevant literature is available on the World Wide Web at physics.nist.gov/constants and physics.nist.gov/constantsbib, respectively. .

Final Report on Jobin Yvon Contained Inductively Coupled Plasma Emission Spectrometer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pennebaker, F.M.

2003-03-17

A new Inductively Coupled Plasma -- Emission Spectrometer (ICP-ES) was recently purchased and installed in Lab B-147/151 at SRTC. The contained JY Model Ultima 170-C ICP-ES has been tested and compared to current ADS ICP-ES instrumentation. The testing has included both performance tests to evaluate instrumental ability, and the measurement of matrix standards commonly analyzed by ICP-ES at Savannah River. In developing operating procedures for this instrument, we have implemented the use of internal standards and off-peak background subtraction. Both of these techniques are recommended by EPA SW-846 ICP-ES methods and are common to current ICP-ES operations. Based on themore » testing and changes, the JY Model Ultima 170-C ICP-ES provides improved performance for elemental analysis of radioactive samples in the Analytical Development Section.« less

A new extranodal scoring system based on the prognostically relevant extranodal sites in diffuse large B-cell lymphoma, not otherwise specified treated with chemoimmunotherapy.

PubMed

Hwang, Hee Sang; Yoon, Dok Hyun; Suh, Cheolwon; Huh, Jooryung

2016-08-01

Extranodal involvement is a well-known prognostic factor in patients with diffuse large B-cell lymphomas (DLBCL). Nevertheless, the prognostic impact of the extranodal scoring system included in the conventional international prognostic index (IPI) has been questioned in an era where rituximab treatment has become widespread. We investigated the prognostic impacts of individual sites of extranodal involvement in 761 patients with DLBCL who received rituximab-based chemoimmunotherapy. Subsequently, we established a new extranodal scoring system based on extranodal sites, showing significant prognostic correlation, and compared this system with conventional scoring systems, such as the IPI and the National Comprehensive Cancer Network-IPI (NCCN-IPI). An internal validation procedure, using bootstrapped samples, was also performed for both univariate and multivariate models. Using multivariate analysis with a backward variable selection, we found nine extranodal sites (the liver, lung, spleen, central nervous system, bone marrow, kidney, skin, adrenal glands, and peritoneum) that remained significant for use in the final model. Our newly established extranodal scoring system, based on these sites, was better correlated with patient survival than standard scoring systems, such as the IPI and the NCCN-IPI. Internal validation by bootstrapping demonstrated an improvement in model performance of our modified extranodal scoring system. Our new extranodal scoring system, based on the prognostically relevant sites, may improve the performance of conventional prognostic models of DLBCL in the rituximab era and warrants further external validation using large study populations.

Development of an International Prostate Cancer Outcomes Registry.

PubMed

Evans, Sue M; Nag, Nupur; Roder, David; Brooks, Andrew; Millar, Jeremy L; Moretti, Kim L; Pryor, David; Skala, Marketa; McNeil, John J

2016-04-01

To establish a Prostate Cancer Outcomes Registry-Australia and New Zealand (PCOR-ANZ) for monitoring outcomes of prostate cancer treatment and care, in a cost-effective manner. Stakeholders were recruited based on their interest, importance in achieving the monitoring and reporting of clinical practice and patient outcomes, and in amalgamation of existing registries. Each participating jurisdiction is responsible for local governance, site recruitment, data collection, and data transfer into the PCOR-ANZ. To establish each local registry, hospitals and clinicians within a jurisdiction were approached to voluntarily contribute to the registry following relevant ethical approval. Patient contact occurs following notification of prostate cancer through a hospital or pathology report, or from a cancer registry. Patient registration is based on an opt-out model. The PCOR-ANZ is a secure web-based registry adhering to ISO 27001 standards. Based on a standardised minimum data set, information on demographics, diagnosis, treatment, outcomes, and patient reported quality of life, are collected. Eight of nine jurisdictions have agreed to contribute to the PCOR-ANZ. Each jurisdiction has commenced implementation of necessary infrastructure to support rapid rollout. PCOR-ANZ has defined a minimum data set for collection, to enable analysis of key quality indicators that will aid in assessing clinical practice and patient focused outcomes. PCOR-ANZ will provide a useful resource of risk-adjusted evidence-based data to clinicians, hospitals, and decision makers on prostate cancer clinical practice. © 2016 The Authors BJU International © 2016 BJU International Published by John Wiley & Sons Ltd.

Printing metal-spiked inks for LA-ICP-MS bioimaging internal standardization: comparison of the different nephrotoxic behavior of cisplatin, carboplatin, and oxaliplatin.

PubMed

Moraleja, Irene; Esteban-Fernández, Diego; Lázaro, Alberto; Humanes, Blanca; Neumann, Boris; Tejedor, Alberto; Luz Mena, M; Jakubowski, Norbert; Gómez-Gómez, M Milagros

2016-03-01

The study of the distribution of the cytostatic drugs cisplatin, carboplatin, and oxaliplatin along the kidney may help to understand their different nephrotoxic behavior. Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) allows the acquisition of trace element images in biological tissues. However, results obtained are affected by several variations concerning the sample matrix and instrumental drifts. In this work, an internal standardization method based on printing an Ir-spiked ink onto the surface of the sample has been developed to evaluate the different distributions and accumulation levels of the aforementioned drugs along the kidney of a rat model. A conventional ink-jet printer was used to print fresh sagittal kidney tissue slices of 4 μm. A reproducible and homogenous deposition of the ink along the tissue was observed. The ink was partially absorbed on top of the tissue. Thus, this approach provides a pseudo-internal standardization, due to the fact that the ablation sample and internal standard take place subsequently and not simultaneously. A satisfactory normalization of LA-ICP-MS bioimages and therefore a reliable comparison of the kidney treated with different Pt-based drugs were achieved even for tissues analyzed on different days. Due to the complete ablation of the sample, the transport of the ablated internal standard and tissue to the inductively coupled plasma-mass spectrometry (ICP-MS) is practically taking place at the same time. Pt accumulation in the kidney was observed in accordance to the dosages administered for each drug. Although the accumulation rate of cisplatin and oxaliplatin is high in both cases, their Pt distributions differ. The strong nephrotoxicity observed for cisplatin and the absence of such side effect in the case of oxaliplatin could explain these distribution differences. The homogeneous distribution of oxaliplatin in the cortical and medullar areas could be related with its higher affinity for cellular transporters such as MATE2-k.

Crystal Symmetry Algorithms in a High-Throughput Framework for Materials

NASA Astrophysics Data System (ADS)

Taylor, Richard

The high-throughput framework AFLOW that has been developed and used successfully over the last decade is improved to include fully-integrated software for crystallographic symmetry characterization. The standards used in the symmetry algorithms conform with the conventions and prescriptions given in the International Tables of Crystallography (ITC). A standard cell choice with standard origin is selected, and the space group, point group, Bravais lattice, crystal system, lattice system, and representative symmetry operations are determined. Following the conventions of the ITC, the Wyckoff sites are also determined and their labels and site symmetry are provided. The symmetry code makes no assumptions on the input cell orientation, origin, or reduction and has been integrated in the AFLOW high-throughput framework for materials discovery by adding to the existing code base and making use of existing classes and functions. The software is written in object-oriented C++ for flexibility and reuse. A performance analysis and examination of the algorithms scaling with cell size and symmetry is also reported.

Analytical and between-subject variation of thrombin generation measured by calibrated automated thrombography on plasma samples.

PubMed

Kristensen, Anne F; Kristensen, Søren R; Falkmer, Ursula; Münster, Anna-Marie B; Pedersen, Shona

2018-05-01

The Calibrated Automated Thrombography (CAT) is an in vitro thrombin generation (TG) assay that holds promise as a valuable tool within clinical diagnostics. However, the technique has a considerable analytical variation, and we therefore, investigated the analytical and between-subject variation of CAT systematically. Moreover, we assess the application of an internal standard for normalization to diminish variation. 20 healthy volunteers donated one blood sample which was subsequently centrifuged, aliquoted and stored at -80 °C prior to analysis. The analytical variation was determined on eight runs, where plasma from the same seven volunteers was processed in triplicates, and for the between-subject variation, TG analysis was performed on plasma from all 20 volunteers. The trigger reagents used for the TG assays included both PPP reagent containing 5 pM tissue factor (TF) and PPPlow with 1 pM TF. Plasma, drawn from a single donor, was applied to all plates as an internal standard for each TG analysis, which subsequently was used for normalization. The total analytical variation for TG analysis performed with PPPlow reagent is 3-14% and 9-13% for PPP reagent. This variation can be minimally reduced by using an internal standard but mainly for ETP (endogenous thrombin potential). The between-subject variation is higher when using PPPlow than PPP and this variation is considerable higher than the analytical variation. TG has a rather high inherent analytical variation but considerable lower than the between-subject variation when using PPPlow as reagent.

Rewriting Modulo SMT

NASA Technical Reports Server (NTRS)

Rocha, Camilo; Meseguer, Jose; Munoz, Cesar A.

2013-01-01

Combining symbolic techniques such as: (i) SMT solving, (ii) rewriting modulo theories, and (iii) model checking can enable the analysis of infinite-state systems outside the scope of each such technique. This paper proposes rewriting modulo SMT as a new technique combining the powers of (i)-(iii) and ideally suited to model and analyze infinite-state open systems; that is, systems that interact with a non-deterministic environment. Such systems exhibit both internal non-determinism due to the system, and external non-determinism due to the environment. They are not amenable to finite-state model checking analysis because they typically are infinite-state. By being reducible to standard rewriting using reflective techniques, rewriting modulo SMT can both naturally model and analyze open systems without requiring any changes to rewriting-based reachability analysis techniques for closed systems. This is illustrated by the analysis of a real-time system beyond the scope of timed automata methods.

A Global Assessment on Climate Research Engaging Indigenous Knowledge Systems and Recommendations for Quality Standards of Research Practice in Indigenous Communities

NASA Astrophysics Data System (ADS)

Davíd-Chavez, D. M.; Gavin, M. C.

2017-12-01

Indigenous communities worldwide have maintained their own knowledge systems for millennia informed through careful observation of dynamics of environmental changes. Withstanding centuries of challenges to their rights to maintain and practice these knowledge systems, Indigenous peoples continually speak to a need for quality standards for research in their communities. Although, international and Indigenous peoples' working groups emphasize Indigenous knowledge systems and the communities who hold them as critical resources for understanding and adapting to climate change, there has yet to be a comprehensive, evidence based analysis into how diverse knowledge systems are integrated in scientific studies. Do current research practices challenge or support Indigenous communities in their efforts to maintain and appropriately apply their knowledge systems? This study addresses this question using a systematic literature review and meta-analysis assessing levels of Indigenous community participation and decision-making in all stages of the research process (initiation, design, implementation, analysis, dissemination). Assessment is based on reported quality indicators such as: outputs that serve the community, ethical guidelines in practice (free, prior, and informed consent and intellectual property rights), and community access to findings. These indicators serve to identify patterns between levels of community participation and quality standards in practice. Meta-analysis indicates most climate studies practice an extractive model in which Indigenous knowledge systems are co-opted with minimal participation or decision-making authority from communities who hold them. Few studies report outputs that directly serve Indigenous communities, ethical guidelines in practice, or community access to findings. Studies reporting the most quality indicators were initiated in mutual agreement between Indigenous communities and outside researchers or by communities themselves. This study also draws from the researcher's experiences as an Indigenous scientist and includes recommendations for quality research practice. This global assessment provides an evidence base to inform our understanding of broader impacts related to research design.

From the Analysis of Work-Processes to Designing Competence-Based Occupational Standards and Vocational Curricula

ERIC Educational Resources Information Center

Tutlys, Vidmantas; Spöttl, Georg

2017-01-01

Purpose: This paper aims to explore methodological and institutional challenges on application of the work-process analysis approach in the design and development of competence-based occupational standards for Lithuania. Design/methodology/approach: The theoretical analysis is based on the review of scientific literature and the analysis of…

Final Rule for Control of Emissions From New Marine Compression-Ignition Engines at or Above 2.5 Liters Per Cylinder

EPA Pesticide Factsheets

The near-term, Tier 1 standards in this rule are equivalent to the internationally negotiated emission limits for oxides of nitrogen (NOx). These standards will go into effect in 2004 and are based on readily available emission-control technology.

The International Learning Object Metadata Survey

ERIC Educational Resources Information Center

Friesen, Norm

2004-01-01

A wide range of projects and organizations is currently making digital learning resources (learning objects) available to instructors, students, and designers via systematic, standards-based infrastructures. One standard that is central to many of these efforts and infrastructures is known as Learning Object Metadata (IEEE 1484.12.1-2002, or LOM).…

Developing Standards-Based Geography Curricular Materials from Overseas Field Experiences for K-12 Teachers

ERIC Educational Resources Information Center

Oberle, Alex; Palacios, Fabian Araya

2012-01-01

Overseas experiences provide educators with exceptional opportunities to incorporate field study, firsthand experiences, and tangible artifacts into the classroom. Despite this potential, teachers must consider curricular standards that direct how such international endeavors can be integrated. Furthermore, geography curriculum development is more…

Collaborative study for the calibration of a replacement International Standard for Tetanus Toxoid Adsorbed.

PubMed

Tierney, Rob; Stickings, Paul; Hockley, Jason; Rigsby, Peter; Iwaki, Masaaki; Sesardic, Dorothea

2011-11-01

We present the results of a collaborative study for the establishment of a replacement International Standard (IS) for Tetanus Toxoid Adsorbed. Two candidate preparations were included in the study, one of which was established as the 4th IS for Tetanus Toxoid Adsorbed at the WHO Expert Committee on Biological Standardization meeting in October 2010. This preparation was found to have a unitage of 490 IU/ampoule, based on calibration in guinea pig challenge assays. Results from mouse challenge assays suggest that the relative performance of two candidate preparations may differ significantly between guinea pigs and mice. The authors note that the number of laboratories that performed guinea pig challenge assays, which are used to calibrate and assign IU, is much lower than in previous collaborative studies and this may have implications for calibration of replacement standards in the future. The issue of assigning separate units to the IS for guinea pig and mouse assays is discussed. The study also assessed performance of the replacement standard in serological assays which are used as alternative procedures to challenge assays for tetanus potency testing. Results suggest that the replacement standard is suitable for use as the reference vaccine in serological assays. Copyright © 2011 The International Alliance for Biological Standardization. Published by Elsevier Ltd. All rights reserved.

Validation of lipolysis product extraction from aqueous/biological samples, separation and quantification by thin-layer chromatography with flame ionization detection analysis using O-cholesteryl ethylene glycol as a new internal standard.

PubMed

Cavalier, Jean-François; Lafont, Dominique; Boullanger, Paul; Houisse, David; Giallo, Jacqueline; Ballester, Jean-Michel; Carrière, Frédéric

2009-09-11

A general and easily accessible method for the extraction followed by the simultaneous separation and quantitative determination of triacylglycerols, diacylglycerols, monoacylglycerols and free fatty acids has been improved and optimized based on existing protocols using liquid-phase extraction and thin-layer chromatography coupled to flame ionization detection (TLC/FID Iatroscan). After lipid extraction in the presence of a suitable new synthetic internal standard, namely CholE1, a single elution step using n-heptane/diethyl ether/formic acid (55:45:1, v/v/v) was applied. This method was validated in line with international bioanalytical method validation guidelines using two different matrix systems: purified water and human gastro-intestinal fluid. Overall, the assay was found to have high levels of precision with coefficients of variation ranging from 1.48% to 11.0% and accuracy ranging from -13.3% to +5.79% RE. The confidence limits of the lipid mean recovery rates varied between 89.9% and 104%. This method is therefore highly suitable for quantifying the lipolysis products generated in vitro during the hydrolysis of various fats and oils by digestive lipases, as well as those collected from the gastro-intestinal tract in the course of human clinical studies on lipid digestion.

Cyberinfrastructure for the digital brain: spatial standards for integrating rodent brain atlases

PubMed Central

Zaslavsky, Ilya; Baldock, Richard A.; Boline, Jyl

2014-01-01

Biomedical research entails capture and analysis of massive data volumes and new discoveries arise from data-integration and mining. This is only possible if data can be mapped onto a common framework such as the genome for genomic data. In neuroscience, the framework is intrinsically spatial and based on a number of paper atlases. This cannot meet today's data-intensive analysis and integration challenges. A scalable and extensible software infrastructure that is standards based but open for novel data and resources, is required for integrating information such as signal distributions, gene-expression, neuronal connectivity, electrophysiology, anatomy, and developmental processes. Therefore, the International Neuroinformatics Coordinating Facility (INCF) initiated the development of a spatial framework for neuroscience data integration with an associated Digital Atlasing Infrastructure (DAI). A prototype implementation of this infrastructure for the rodent brain is reported here. The infrastructure is based on a collection of reference spaces to which data is mapped at the required resolution, such as the Waxholm Space (WHS), a 3D reconstruction of the brain generated using high-resolution, multi-channel microMRI. The core standards of the digital atlasing service-oriented infrastructure include Waxholm Markup Language (WaxML): XML schema expressing a uniform information model for key elements such as coordinate systems, transformations, points of interest (POI)s, labels, and annotations; and Atlas Web Services: interfaces for querying and updating atlas data. The services return WaxML-encoded documents with information about capabilities, spatial reference systems (SRSs) and structures, and execute coordinate transformations and POI-based requests. Key elements of INCF-DAI cyberinfrastructure have been prototyped for both mouse and rat brain atlas sources, including the Allen Mouse Brain Atlas, UCSD Cell-Centered Database, and Edinburgh Mouse Atlas Project. PMID:25309417

Cyberinfrastructure for the digital brain: spatial standards for integrating rodent brain atlases.

PubMed

Zaslavsky, Ilya; Baldock, Richard A; Boline, Jyl

2014-01-01

Biomedical research entails capture and analysis of massive data volumes and new discoveries arise from data-integration and mining. This is only possible if data can be mapped onto a common framework such as the genome for genomic data. In neuroscience, the framework is intrinsically spatial and based on a number of paper atlases. This cannot meet today's data-intensive analysis and integration challenges. A scalable and extensible software infrastructure that is standards based but open for novel data and resources, is required for integrating information such as signal distributions, gene-expression, neuronal connectivity, electrophysiology, anatomy, and developmental processes. Therefore, the International Neuroinformatics Coordinating Facility (INCF) initiated the development of a spatial framework for neuroscience data integration with an associated Digital Atlasing Infrastructure (DAI). A prototype implementation of this infrastructure for the rodent brain is reported here. The infrastructure is based on a collection of reference spaces to which data is mapped at the required resolution, such as the Waxholm Space (WHS), a 3D reconstruction of the brain generated using high-resolution, multi-channel microMRI. The core standards of the digital atlasing service-oriented infrastructure include Waxholm Markup Language (WaxML): XML schema expressing a uniform information model for key elements such as coordinate systems, transformations, points of interest (POI)s, labels, and annotations; and Atlas Web Services: interfaces for querying and updating atlas data. The services return WaxML-encoded documents with information about capabilities, spatial reference systems (SRSs) and structures, and execute coordinate transformations and POI-based requests. Key elements of INCF-DAI cyberinfrastructure have been prototyped for both mouse and rat brain atlas sources, including the Allen Mouse Brain Atlas, UCSD Cell-Centered Database, and Edinburgh Mouse Atlas Project.

Special Issue of Solid-State Electronics, dedicated to EUROSOI-ULIS 2016

NASA Astrophysics Data System (ADS)

Sverdlov, Viktor; Selberherr, Siegfried

2017-02-01

The current special issue of Solid-State Electronics includes 29 extended papers presented at the 2016 Second Joint International EUROSOI Workshop and International Conference on Ultimate Integration on Silicon (EUROSOI-ULIS 2016) held in Wien, Austria, on January 25-27, 2016. The papers entering to the special issue have been selected by the EUROSOI-ULIS 2016 Technical Program Committee based on the excellence of abstracts submitted and presentations delivered at the conference. In order to comply with the high standards of Solid-State Electronics the manuscripts went through the standard reviewing procedure.

Direct ethanol solid oxide fuel cell operating in gradual internal reforming

NASA Astrophysics Data System (ADS)

Nobrega, S. D.; Galesco, M. V.; Girona, K.; de Florio, D. Z.; Steil, M. C.; Georges, S.; Fonseca, F. C.

2012-09-01

An electrolyte supported solid oxide fuel cell (SOFC) using standard electrodes, doped-lanthanum manganite cathode and Ni-cermet anode, was operated with direct (anhydrous) ethanol for more than 100 h, delivering essentially the same power output as running on hydrogen. A ceria-based layer provides the catalytic activity for the gradual internal reforming, which uses the steam formed by the electrochemical oxidation of hydrogen for the decomposition of ethanol. Such a concept opens up the way for multi-fuel SOFCs using standard components and a catalytic layer.

Laser-ablation ICP-MS as a tool for whole rock trace element analyses on fused powders

NASA Astrophysics Data System (ADS)

Girard, G.; Rooney, T. O.

2013-12-01

Here we present an accurate and precise technique for routine trace element analysis of geologic materials by laser-ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). We focus on rock powders previously prepared for X-ray fluorescence by fusion in a Li2B4O7 flux, and subsequently quenched in a Pt mold to form a glass disk. Our method allows for the analysis up to 30 trace elements by LA-ICP-MS using a Photon-Machines Analyte G2 193 nm excimer laser coupled to a Thermo-Fisher Scientific ICAP Q quadrupole ICP-MS. Analyses are run as scans on the surface of the disks. Laser ablation conditions for which trace element fractionation effects are minimal have been empirically determined to be ~ 4 J m-2 fluence, at 10 Hz , and 10 μm s-1 scan speed, using a 110 μm laser beam size. Ablated material is carried into the ICP-MS by a He carrier at a rate of 0.75 L min-1. Following pre-ablation to remove surface particles, samples are ablated for 200 s, of which 140 s are used for data acquisition. At the end of each scan, a gas blank is collected for 30 s. Dwell times for each element vary between 15 and 60 μs, depending on abundance and instrument sensitivity, allowing 120 readings of each element during the data acquisition time window. To correct for variations in the total volume of material extracted by the laser, three internal standards are used, Ca, Fe and Zr. These elements are routinely analyzed by X-ray fluorescence by the Geoanalytical laboratory at Michigan State University with precision and accuracy of <5%. The availability of several internal standards allows for better correction of possible persisting laser ablation fractionation effects; for a particular trace element, we correct using the internal standard that best reproduces its ablation behavior. Our calibration is based on a combination of fused powders of US Geological Survey and Geological Survey of Japan rock standards, NIST SRM 612 glass, and US Geological Survey natural and synthetic basalt glasses. Instrumental drift is monitored during each run using two fused standards analyzed multiple times as unknowns. We routinely achieve an external precision of <5% on multiple replicates of standards run as unknowns, which are also within <5% of certified values. Elements analyzed include most first row transition metals, large ion lithophile elements, high field strength elements, lanthanide and actinide rare earth elements.

Recent progress in the development of ISO 19751

NASA Astrophysics Data System (ADS)

Farnand, Susan P.; Dalal, Edul N.; Ng, Yee S.

2006-01-01

A small number of general visual attributes have been recognized as essential in describing image quality. These include micro-uniformity, macro-uniformity, colour rendition, text and line quality, gloss, sharpness, and spatial adjacency or temporal adjacency attributes. The multiple-part International Standard discussed here was initiated by the INCITS W1 committee on the standardization of office equipment to address the need for unambiguously documented procedures and methods, which are widely applicable over the multiple printing technologies employed in office applications, for the appearance-based evaluation of these visually significant image quality attributes of printed image quality. 1,2 The resulting proposed International Standard, for which ISO/IEC WD 19751-1 3 presents an overview and an outline of the overall procedure and common methods, is based on a proposal that was predicated on the idea that image quality could be described by a small set of broad-based attributes. 4 Five ad hoc teams were established (now six since a sharpness team is in the process of being formed) to generate standards for one or more of these image quality attributes. Updates on the colour rendition, text and line quality, and gloss attributes are provided.

75 FR 19944 - International Code Council: The Update Process for the International Codes and Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-16

... for Residential Construction in High Wind Areas. ICC 700: National Green Building Standard. The... Codes and Standards that are comprehensive, coordinated, and necessary to regulate the built environment... International Codes and Standards consist of the following: ICC Codes International Building Code. International...

Ensure the Right of Citizens to Work: Problems of Domestic and International Regulation

ERIC Educational Resources Information Center

Berdiyarova, Zhamilya; Serikbekova, Samal; Babajanyan, Yester

2016-01-01

The purpose of this research is to examine the legal problems of ensuring the right to work of citizens in the Republic of Kazakhstan and to find the conformity of labor laws in the Republic of Kazakhstan to international standards. Using the method of comparison analysis of the legislation of the Republic of Kazakhstan and norms of international…

HPLC fingerprint analysis combined with chemometrics for pattern recognition of ginger.

PubMed

Feng, Xu; Kong, Weijun; Wei, Jianhe; Ou-Yang, Zhen; Yang, Meihua

2014-03-01

Ginger, the fresh rhizome of Zingiber officinale Rosc. (Zingiberaceae), has been used worldwide; however, for a long time, there has been no standard approbated internationally for its quality control. To establish an efficacious and combinational method and pattern recognition technique for quality control of ginger. A simple, accurate and reliable method based on high-performance liquid chromatography with photodiode array (HPLC-PDA) detection was developed for establishing the chemical fingerprints of 10 batches of ginger from different markets in China. The method was validated in terms of precision, reproducibility and stability; and the relative standard deviations were all less than 1.57%. On the basis of this method, the fingerprints of 10 batches of ginger samples were obtained, which showed 16 common peaks. Coupled with similarity evaluation software, the similarities between each fingerprint of the sample and the simulative mean chromatogram were in the range of 0.998-1.000. Then, the chemometric techniques, including similarity analysis, hierarchical clustering analysis and principal component analysis were applied to classify the ginger samples. Consistent results were obtained to show that ginger samples could be successfully classified into two groups. This study revealed that HPLC-PDA method was simple, sensitive and reliable for fingerprint analysis, and moreover, for pattern recognition and quality control of ginger.

jmzML, an open-source Java API for mzML, the PSI standard for MS data.

PubMed

Côté, Richard G; Reisinger, Florian; Martens, Lennart

2010-04-01

We here present jmzML, a Java API for the Proteomics Standards Initiative mzML data standard. Based on the Java Architecture for XML Binding and XPath-based XML indexer random-access XML parser, jmzML can handle arbitrarily large files in minimal memory, allowing easy and efficient processing of mzML files using the Java programming language. jmzML also automatically resolves internal XML references on-the-fly. The library (which includes a viewer) can be downloaded from http://jmzml.googlecode.com.

Structural analysis of a ship on global aspect using ANSYS

NASA Astrophysics Data System (ADS)

Rahman, M. Muzibur; Kamol, Rajia Sultana; Islam, Reyana

2017-12-01

Ship is a complex geometry which undergoes a combination of loadings such as hydrostatic, hydrodynamic, wind, wave etc. at sea and thus adequate strength in a ship has always been one of the most challenging tasks for the ship designers. International Maritime Organization (IMO) and classification societies are providing the standards to ensure the adequacy of strength for the ship against all demands throughout its service life. Thus, structural analysis is needed to assess the overall strength of hull, and the means in this regard are based on finite element method which may be applied either local or global aspect of the ship. This paper is an attempt to carry out the structural analysis of a ship in global aspect using ANSYS software to locate the most stress concentration and deformed area, which will have ultimate effect on fatigue fracture.

It's Not Education by Zip Code Anymore--But What is It? Conceptions of Equity under the Common Core

ERIC Educational Resources Information Center

Kornhaber, Mindy L.; Griffith, Kelly; Tyler, Alison

2014-01-01

The Common Core State Standards Initiative is a standards-based reform in which 45 U.S. states and the District of Columbia have agreed to participate. The reform seeks to anchor primary and secondary education across these states in one set of demanding, internationally benchmarked standards. Thereby, all students will be prepared for further…

Using Performance Analysis for Training in an Organization Implementing ISO-9000 Manufacturing Practices: A Case Study.

ERIC Educational Resources Information Center

Kunneman, Dale E.; Sleezer, Catherine M.

2000-01-01

This case study examines the application of the Performance Analysis for Training (PAT) Model in an organization that was implementing ISO-9000 (International Standards Organization) processes for manufacturing practices. Discusses the interaction of organization characteristics, decision maker characteristics, and analyst characteristics to…

Use of fluorinated polybrominated diphenyl ethers and simplified cleanup for the analysis of polybrominated diphenyl ethers in house dust

EPA Science Inventory

A simple, cost-effective method is described for the analysis of polybrominated diphenyl ethers (PBDEs) in house dust using pressurized fluid extraction, cleanup with modified silica solid phase extraction tubes, and fluorinated internal standards. There are 14 PBDE congeners inc...

StaR Child Health: developing evidence-based guidance for the design, conduct, and reporting of pediatric trials.

PubMed

Hartling, L; Wittmeier, K D M; Caldwell, P H; van der Lee, J H; Klassen, T P; Craig, J C; Offringa, M

2011-11-01

Standards for Research in (StaR) Child Health was founded in 2009 to address the paucity and shortcomings of pediatric clinical trials. This initiative involves international experts who are dedicated to developing practical, evidence-based standards to enhance the reliability and relevance of pediatric clinical research. Through a systematic "knowledge to action" plan, StaR Child Health will make efforts to improve and expand the evidence base for child health across the world.

Psychometric Characteristics of Process Evaluation Measures for a Rural School-based Childhood Obesity Prevention Study: Louisiana Health

PubMed Central

Newton, R. L.; Thomson, J. L.; Rau, K.; Duhe’, S.; Sample, A.; Singleton, N.; Anton, S. D.; Webber, L. S.; Williamson, D. A.

2011-01-01

Purpose To evaluate the implementation of intervention components of the Louisiana Health study, which was a multi-component childhood obesity prevention program conducted in rural schools. Design Content analysis. Setting Process evaluation assessed implementation in the classrooms, gym classes, and cafeterias. Subjects Classroom teachers (n = 232), physical education teachers (n = 53), food service managers (n = 33), and trained observers (n = 9). Measures Five process evaluation measures were created: Physical Education Questionnaire (PEQ), Intervention Questionnaire (IQ), Food Service Manager Questionnaire (FSMQ), Classroom Observation (CO) and School Nutrition Environment Observation (SNEO). Analysis Inter-rater reliability and internal consistency were conducted on all measures. ANOVA and Chi-square were used to compare differences across study groups on questionnaires and observations. Results The PEQ and one sub-scale from the FSMQ were eliminated because their reliability coefficients fell below acceptable standards. The sub-scale internal consistencies for the IQ, FSMQ, CO, and SNEO (all Cronbach’s α > .60) were acceptable. Conclusions After the initial 4 months of intervention, there was evidence that the Louisiana Health intervention was being implemented as it was designed. In summary, four process evaluation measures were found to be sufficiently reliable and valid for assessing the delivery of various aspects of a school-based obesity prevention program. These process measures could be modified to evaluate the delivery of other similar school-based interventions. PMID:21721969

Psychometric characteristics of process evaluation measures for a rural school-based childhood obesity prevention study: Louisiana Health.

PubMed

Newton, Robert L; Thomson, Jessica L; Rau, Kristi K; Ragusa, Shelly A; Sample, Alicia D; Singleton, Nakisha N; Anton, Stephen D; Webber, Larry S; Williamson, Donald A

2011-01-01

To evaluate the implementation of intervention components of the Louisiana Health study, which was a multicomponent childhood obesity prevention program conducted in rural schools. Content analysis. Process evaluation assessed implementation in classrooms, gym classes, and cafeterias. Classroom teachers (n  =  232), physical education teachers (n  =  53), food service managers (n  =  33), and trained observers (n  =  9). Five process evaluation measures were created: Physical Education Questionnaire (PEQ), Intervention Questionnaire (IQ), Food Service Manager Questionnaire (FSMQ), Classroom Observation (CO), and School Nutrition Environment Observation (SNEO). Interrater reliability and internal consistency were assessed on all measures. Analysis of variance and χ(2) were used to compare differences across study groups on questionnaires and observations. The PEQ and one subscale from the FSMQ were eliminated because their reliability coefficients fell below acceptable standards. The subscale internal consistencies for the IQ, FSMQ, CO, and SNEO (all Cronbach α > .60) were acceptable. After the initial 4 months of intervention, there was evidence that the Louisiana Health intervention was being implemented as it was designed. In summary, four process evaluation measures were found to be sufficiently reliable and valid for assessing the delivery of various aspects of a school-based obesity prevention program. These process measures could be modified to evaluate the delivery of other similar school-based interventions.

Developed-developing country partnerships: Benefits to developed countries?

PubMed Central

2012-01-01

Developing countries can generate effective solutions for today’s global health challenges. This paper reviews relevant literature to construct the case for international cooperation, and in particular, developed-developing country partnerships. Standard database and web-based searches were conducted for publications in English between 1990 and 2010. Studies containing full or partial data relating to international cooperation between developed and developing countries were retained for further analysis. Of 227 articles retained through initial screening, 65 were included in the final analysis. The results were two-fold: some articles pointed to intangible benefits accrued by developed country partners, but the majority of information pointed to developing country innovations that can potentially inform health systems in developed countries. This information spanned all six WHO health system components. Ten key health areas where developed countries have the most to learn from the developing world were identified and include, rural health service delivery; skills substitution; decentralisation of management; creative problem-solving; education in communicable disease control; innovation in mobile phone use; low technology simulation training; local product manufacture; health financing; and social entrepreneurship. While there are no guarantees that innovations from developing country experiences can effectively transfer to developed countries, combined developed-developing country learning processes can potentially generate effective solutions for global health systems. However, the global pool of knowledge in this area is virgin and further work needs to be undertaken to advance understanding of health innovation diffusion. Even more urgently, a standardized method for reporting partnership benefits is needed—this is perhaps the single most immediate need in planning for, and realizing, the full potential of international cooperation between developed and developing countries. PMID:22709651

“A Doubt is at Best an Unsafe Standard”: Measuring Sugar in the Early Bureau of Standards

PubMed Central

Singerman, David

2007-01-01

In 1900, measuring the purity of sugar was a problem with serious economic consequences, and Congress created the Bureau of Standards in part to create accurate standards for saccharimetry. To direct the Polarimetry Section, Director Stratton hired the young chemist Frederick Bates, who went on to make significant contributions to the discipline of sugar chemistry. This paper explores four of Bates’s greatest accomplishments: identifying the error caused by clarifying lead acetate, inventing the remarkable quartz-compensating saccharimeter with adjustable sensibility, discovering the significant error in the prevailing Ventzke saccharimetric scale, and reviving the International Commission for Uniform Methods of Sugar Analysis to unify the international community of chemists after the tensions of World War One. It also shows how accomplishments in saccharimetry reflected the growing importance and confidence of the Bureau of Standards, and how its scientific success smoothed the operation of American commerce. PMID:27110454

Standard-compliant real-time transmission of ECGs: harmonization of ISO/IEEE 11073-PHD and SCP-ECG.

PubMed

Trigo, Jesús D; Chiarugi, Franco; Alesanco, Alvaro; Martínez-Espronceda, Miguel; Chronaki, Catherine E; Escayola, Javier; Martínez, Ignacio; García, José

2009-01-01

Ambient assisted living and integrated care in an aging society is based on the vision of the lifelong Electronic Health Record calling for HealthCare Information Systems and medical device interoperability. For medical devices this aim can be achieved by the consistent implementation of harmonized international interoperability standards. The ISO/IEEE 11073 (x73) family of standards is a reference standard for medical device interoperability. In its Personal Health Device (PHD) version several devices have been included, but an ECG device specialization is not yet available. On the other hand, the SCP-ECG standard for short-term diagnostic ECGs (EN1064) has been recently approved as an international standard ISO/IEEE 11073-91064:2009. In this paper, the relationships between a proposed x73-PHD model for an ECG device and the fields of the SCP-ECG standard are investigated. A proof-of-concept implementation of the proposed x73-PHD ECG model is also presented, identifying open issues to be addressed by standards development for the wider interoperability adoption of x73-PHD standards.

Validation of the conceptual research utilization scale: an application of the standards for educational and psychological testing in healthcare.

PubMed

Squires, Janet E; Estabrooks, Carole A; Newburn-Cook, Christine V; Gierl, Mark

2011-05-19

There is a lack of acceptable, reliable, and valid survey instruments to measure conceptual research utilization (CRU). In this study, we investigated the psychometric properties of a newly developed scale (the CRU Scale). We used the Standards for Educational and Psychological Testing as a validation framework to assess four sources of validity evidence: content, response processes, internal structure, and relations to other variables. A panel of nine international research utilization experts performed a formal content validity assessment. To determine response process validity, we conducted a series of one-on-one scale administration sessions with 10 healthcare aides. Internal structure and relations to other variables validity was examined using CRU Scale response data from a sample of 707 healthcare aides working in 30 urban Canadian nursing homes. Principal components analysis and confirmatory factor analyses were conducted to determine internal structure. Relations to other variables were examined using: (1) bivariate correlations; (2) change in mean values of CRU with increasing levels of other kinds of research utilization; and (3) multivariate linear regression. Content validity index scores for the five items ranged from 0.55 to 1.00. The principal components analysis predicted a 5-item 1-factor model. This was inconsistent with the findings from the confirmatory factor analysis, which showed best fit for a 4-item 1-factor model. Bivariate associations between CRU and other kinds of research utilization were statistically significant (p < 0.01) for the latent CRU scale score and all five CRU items. The CRU scale score was also shown to be significant predictor of overall research utilization in multivariate linear regression. The CRU scale showed acceptable initial psychometric properties with respect to responses from healthcare aides in nursing homes. Based on our validity, reliability, and acceptability analyses, we recommend using a reduced (four-item) version of the CRU scale to yield sound assessments of CRU by healthcare aides. Refinement to the wording of one item is also needed. Planned future research will include: latent scale scoring, identification of variables that predict and are outcomes to conceptual research use, and longitudinal work to determine CRU Scale sensitivity to change.

Determination of a Two-Phase Structure of Nanocrystals: GaN and SiC

NASA Technical Reports Server (NTRS)

Palosz, W.; Grzanka, E.; Gierlotka, S.; Stelmakh, S.; Pielaszek, R.; Lojkowski, W.; Bismayer, U.; Neuefeind, J.; Weber, H.-P.; Janik, J. F.;

The International Reference Ionosphere: Rawer's IRI and its status today

NASA Astrophysics Data System (ADS)

Bilitza, D.

2014-11-01

When the Committee on Space Research (COSPAR) initiated the International Reference Ionosphere (IRI) project in 1968 it wisely selected K. Rawer as its first Chairperson. With a solid footing and good contacts in both the ground-based and space-based ionospheric communities he was ideally suited to pull together colleagues and data from both communities to help build the first version of the IRI. He assembled a team of 20+ international ionospheric experts in the IRI Working Group and chaired and directed the group from 1968 to 1984. The working group has now grown to 63 members and the IRI model has undergone many revisions as new data became available and new modeling techniques were applied. This paper was presented during a special session of the Kleinheubach Tagung 2013 in honor of K. Rawer's 100th birthday. It will review the current status of the IRI model and project and the international recognition it has achieved. It is quite fitting that this year we not only celebrate K. Rawer's 100th birthday but also the exciting news that his favorite science endeavor, IRI, has been internationally recognized as an ISO (International Standardization Organization) standard. The IRI homepage is at http://irimodel.org.

Modeling receptor kinetics in the analysis of survival data for organophosphorus pesticides.

PubMed

Jager, Tjalling; Kooijman, Sebastiaan A L M

2005-11-01

Acute ecotoxicological tests usually focus on survival at a standardized exposure time. However, LC50's decrease in time in a manner that depends both on the chemical and on the organism. DEBtox is an existing approach to analyze toxicity data in time, based on hazard modeling (the internal concentration increases the probability to die). However, certain chemicals elicit their response through (irreversible) interaction with a specific receptor, such as inhibition of acetylcholinesterase (AChE). Effects therefore do not solely depend on the actual internal concentration, but also on its (recent) past. In this paper, the DEBtox method is extended with a simple mechanistic model to deal with receptor interactions. We analyzed data from the literature for organophosphorus pesticides in guppies, fathead minnows, and springtails. Overall, the observed survival patterns do not clearly differ from those of chemicals with a less-specific mode of action. However, using the receptor model, resulting parameter estimates are easier to interpret in terms of underlying mechanisms and reveal similarities between the various pesticides. We observed thatthe no-effect concentration estimated from the receptor model is basically identical to the value from standard DEBtox, illustrating the robustness of this summary statistic.

ICAO safety management systems (SMS) development in environmental contexts: A field study of greater China

NASA Astrophysics Data System (ADS)

Leib, Steven M.

This was a mixed-methods exploratory study to investigate association between environmental context and the implementation status of Safety Management Systems (SMS) at airports in Greater China. Using a framework of Institutional Theory, this study looked at three regions of Greater China and explored internal and external environments of SMS at airports within each region. It used ICAO standards to evaluate the implementation status of SMS at those airports based on the perceptions of 126 participants. This research also employed snowballing technique to spread a survey tool to participants in Greater China through several key gatekeepers, and then applied the Delphi method for interviews with key gatekeepers themselves. Analysis of the data suggested several associations between various sub-concepts of the external environment and different components of SMS in the three regions. In addition, the data suggested a relationship between the internal environment as a whole and the overall status of SMS implementation in each region. Lastly, the study makes several recommendations for future research regarding global standards implemented in local environments, the evaluation of SMS implementation status, and the theoretical implications of this study.

Uncertainty Analysis of Thermal Comfort Parameters

NASA Astrophysics Data System (ADS)

Ribeiro, A. Silva; Alves e Sousa, J.; Cox, Maurice G.; Forbes, Alistair B.; Matias, L. Cordeiro; Martins, L. Lages

2015-08-01

International Standard ISO 7730:2005 defines thermal comfort as that condition of mind that expresses the degree of satisfaction with the thermal environment. Although this definition is inevitably subjective, the Standard gives formulae for two thermal comfort indices, predicted mean vote ( PMV) and predicted percentage dissatisfied ( PPD). The PMV formula is based on principles of heat balance and experimental data collected in a controlled climate chamber under steady-state conditions. The PPD formula depends only on PMV. Although these formulae are widely recognized and adopted, little has been done to establish measurement uncertainties associated with their use, bearing in mind that the formulae depend on measured values and tabulated values given to limited numerical accuracy. Knowledge of these uncertainties are invaluable when values provided by the formulae are used in making decisions in various health and civil engineering situations. This paper examines these formulae, giving a general mechanism for evaluating the uncertainties associated with values of the quantities on which the formulae depend. Further, consideration is given to the propagation of these uncertainties through the formulae to provide uncertainties associated with the values obtained for the indices. Current international guidance on uncertainty evaluation is utilized.

A prediction model-based algorithm for computer-assisted database screening of adverse drug reactions in the Netherlands.

PubMed

Scholl, Joep H G; van Hunsel, Florence P A M; Hak, Eelko; van Puijenbroek, Eugène P

2018-02-01

The statistical screening of pharmacovigilance databases containing spontaneously reported adverse drug reactions (ADRs) is mainly based on disproportionality analysis. The aim of this study was to improve the efficiency of full database screening using a prediction model-based approach. A logistic regression-based prediction model containing 5 candidate predictors was developed and internally validated using the Summary of Product Characteristics as the gold standard for the outcome. All drug-ADR associations, with the exception of those related to vaccines, with a minimum of 3 reports formed the training data for the model. Performance was based on the area under the receiver operating characteristic curve (AUC). Results were compared with the current method of database screening based on the number of previously analyzed associations. A total of 25 026 unique drug-ADR associations formed the training data for the model. The final model contained all 5 candidate predictors (number of reports, disproportionality, reports from healthcare professionals, reports from marketing authorization holders, Naranjo score). The AUC for the full model was 0.740 (95% CI; 0.734-0.747). The internal validity was good based on the calibration curve and bootstrapping analysis (AUC after bootstrapping = 0.739). Compared with the old method, the AUC increased from 0.649 to 0.740, and the proportion of potential signals increased by approximately 50% (from 12.3% to 19.4%). A prediction model-based approach can be a useful tool to create priority-based listings for signal detection in databases consisting of spontaneous ADRs. © 2017 The Authors. Pharmacoepidemiology & Drug Safety Published by John Wiley & Sons Ltd.

Systematic Assessment of Seven Solvent and Solid-Phase Extraction Methods for Metabolomics Analysis of Human Plasma by LC-MS

NASA Astrophysics Data System (ADS)

Sitnikov, Dmitri G.; Monnin, Cian S.; Vuckovic, Dajana

2016-12-01

The comparison of extraction methods for global metabolomics is usually executed in biofluids only and focuses on metabolite coverage and method repeatability. This limits our detailed understanding of extraction parameters such as recovery and matrix effects and prevents side-by-side comparison of different sample preparation strategies. To address this gap in knowledge, seven solvent-based and solid-phase extraction methods were systematically evaluated using standard analytes spiked into both buffer and human plasma. We compared recovery, coverage, repeatability, matrix effects, selectivity and orthogonality of all methods tested for non-lipid metabolome in combination with reversed-phased and mixed-mode liquid chromatography mass spectrometry analysis (LC-MS). Our results confirmed wide selectivity and excellent precision of solvent precipitations, but revealed their high susceptibility to matrix effects. The use of all seven methods showed high overlap and redundancy which resulted in metabolite coverage increases of 34-80% depending on LC-MS method employed as compared to the best single extraction protocol (methanol/ethanol precipitation) despite 7x increase in MS analysis time and sample consumption. The most orthogonal methods to methanol-based precipitation were ion-exchange solid-phase extraction and liquid-liquid extraction using methyl-tertbutyl ether. Our results help facilitate rational design and selection of sample preparation methods and internal standards for global metabolomics.

Systematic Assessment of Seven Solvent and Solid-Phase Extraction Methods for Metabolomics Analysis of Human Plasma by LC-MS

PubMed Central

Sitnikov, Dmitri G.; Monnin, Cian S.; Vuckovic, Dajana

2016-01-01

The comparison of extraction methods for global metabolomics is usually executed in biofluids only and focuses on metabolite coverage and method repeatability. This limits our detailed understanding of extraction parameters such as recovery and matrix effects and prevents side-by-side comparison of different sample preparation strategies. To address this gap in knowledge, seven solvent-based and solid-phase extraction methods were systematically evaluated using standard analytes spiked into both buffer and human plasma. We compared recovery, coverage, repeatability, matrix effects, selectivity and orthogonality of all methods tested for non-lipid metabolome in combination with reversed-phased and mixed-mode liquid chromatography mass spectrometry analysis (LC-MS). Our results confirmed wide selectivity and excellent precision of solvent precipitations, but revealed their high susceptibility to matrix effects. The use of all seven methods showed high overlap and redundancy which resulted in metabolite coverage increases of 34–80% depending on LC-MS method employed as compared to the best single extraction protocol (methanol/ethanol precipitation) despite 7x increase in MS analysis time and sample consumption. The most orthogonal methods to methanol-based precipitation were ion-exchange solid-phase extraction and liquid-liquid extraction using methyl-tertbutyl ether. Our results help facilitate rational design and selection of sample preparation methods and internal standards for global metabolomics. PMID:28000704

Commutability of the First World Health Organization International Standard for Human Cytomegalovirus

PubMed Central

Preiksaitis, J.; Tong, Y.; Pang, X.; Sun, Y.; Tang, L.; Cook, L.; Pounds, S.; Fryer, J.; Caliendo, A. M.

2015-01-01

Quantitative detection of cytomegalovirus (CMV) DNA has become a standard part of care for many groups of immunocompromised patients; recent development of the first WHO international standard for human CMV DNA has raised hopes of reducing interlaboratory variability of results. Commutability of reference material has been shown to be necessary if such material is to reduce variability among laboratories. Here we evaluated the commutability of the WHO standard using 10 different real-time quantitative CMV PCR assays run by eight different laboratories. Test panels, including aliquots of 50 patient samples (40 positive samples and 10 negative samples) and lyophilized CMV standard, were run, with each testing center using its own quantitative calibrators, reagents, and nucleic acid extraction methods. Commutability was assessed both on a pairwise basis and over the entire group of assays, using linear regression and correspondence analyses. Commutability of the WHO material differed among the tests that were evaluated, and these differences appeared to vary depending on the method of statistical analysis used and the cohort of assays included in the analysis. Depending on the methodology used, the WHO material showed poor or absent commutability with up to 50% of assays. Determination of commutability may require a multifaceted approach; the lack of commutability seen when using the WHO standard with several of the assays here suggests that further work is needed to bring us toward true consensus. PMID:26269622

Longitudinal analysis on human cervical tissue using optical coherence tomography (Conference Presentation)

NASA Astrophysics Data System (ADS)

Gan, Yu; Yao, Wang; Myers, Kristin M.; Vink, Joy-Sarah Y.; Wapner, Ronald J.; Hendon, Christine P.

2017-02-01

Uterine cervical collagen fiber network is vital to the normal cervical function in pregnancy. Previously, we presented an orientation estimation method to enable dispersion analysis on a single axial slice of human cervical tissue obtained from the upper half of cervix using optical coherence tomography (OCT). How the collagen fiber network structure changes from the internal os (top of the cervix which meets the uterus) to external os (bottom of cervix which extends into the vagina), remains unknown due to depth penetration limitations of OCT. To establish a collagen fiber directionality "map" of the entire cervix, we imaged serial axial slices of human NP (n=11) and PG (n=2) cervical tissue obtained from the internal to external os using Institutional Review Board approved protocols at Columbia University Medical Center. Each slice was divided into four quadrants. In each quadrant, we stitched multiple overlapped OCT volumes and analyzed the en face images that were parallel to the surface. A pixel-wise directionality map was generated. We analyzed fiber trend by measuring the mean angles and quantified dispersion by calculating the standard deviation of the fiber direction over a region of 400 μm × 400 μm. For the initial four samples, our analysis confirms a circumferential fiber pattern in the outer region of slices at all depths. We found that the standard deviation close to internal os showed no significance to the standard deviation close to external os (p>0.05), indicating comparable dispersion.

Thin Interface Asymptotics for an Energy/Entropy Approach to Phase-Field Models with Unequal Conductivities

NASA Technical Reports Server (NTRS)

McFadden, G. B.; Wheeler, A. A.; Anderson, D. M.

1999-01-01

Karma and Rapped recently developed a new sharp interface asymptotic analysis of the phase-field equations that is especially appropriate for modeling dendritic growth at low undercoolings. Their approach relieves a stringent restriction on the interface thickness that applies in the conventional asymptotic analysis, and has the added advantage that interfacial kinetic effects can also be eliminated. However, their analysis focussed on the case of equal thermal conductivities in the solid and liquid phases; when applied to a standard phase-field model with unequal conductivities, anomalous terms arise in the limiting forms of the boundary conditions for the interfacial temperature that are not present in conventional sharp-interface solidification models, as discussed further by Almgren. In this paper we apply their asymptotic methodology to a generalized phase-field model which is derived using a thermodynamically consistent approach that is based on independent entropy and internal energy gradient functionals that include double wells in both the entropy and internal energy densities. The additional degrees of freedom associated with the generalized phased-field equations can be chosen to eliminate the anomalous terms that arise for unequal conductivities.

The IDEA (International Duration Evaluation of Adjuvant Chemotherapy) Collaboration: Prospective Combined Analysis of Phase III Trials Investigating Duration of Adjuvant Therapy with the FOLFOX (FOLFOX4 or Modified FOLFOX6) or XELOX (3 versus 6 months) Regimen for Patients with Stage III Colon Cancer: Trial Design and Current Status.

PubMed

André, Thierry; Iveson, Timothy; Labianca, Roberto; Meyerhardt, Jeffrey A; Souglakos, Ioannis; Yoshino, Takayuki; Paul, James; Sobrero, Alberto; Taieb, Julien; Shields, Anthony F; Ohtsu, Atsushi; Grothey, Axel; Sargent, Daniel J

2013-01-01

The International Duration Evaluation of Adjuvant Chemotherapy (IDEA) collaboration was established to prospectively combine and analyze data from several randomized trials conducted around the world to answer whether a three-month course of oxaliplatin-based adjuvant therapy (FOLFOX4/modified FOLFOX6 or XELOX) is non-inferior to the current standard six-month treatment for patients with stage III colon cancer, with a primary endpoint of three years disease-free survival. The IDEA steering committee comprises two members from each group coordinating an individual trial and two members from a secretariat who coordinate combining of the data and management of the joint analysis. Members of the IDEA agreed to combine the data from their individual trials to enable definitive analysis consisting of at least 10,500 patients. With accrual of 8,797 patients at the end of February 2013, the IDEA is on track to achieve its accrual objective of at least 10,500 patients by the end of 2013.

Optical Frequency Standards Based on Neutral Atoms and Molecules

NASA Astrophysics Data System (ADS)

Riehle, Fritz; Helmcke, Juergen

The current status and prospects of optical frequency standards based on neutral atomic and molecular absorbers are reviewed. Special attention is given to an optical frequency standard based on cold Ca atoms which are interrogated with a pulsed excitation scheme leading to resolved line structures with a quality factor Q > 10^12. The optical frequency was measured by comparison with PTB's primary clock to be νCa = 455 986 240 494.13 kHz with a total relative uncertainty of 2.5 x10^-13. After a recent recommendation of the International Committee of Weights and Measures (CIPM), this frequency standard now represents one of the most accurate realizations of the length unit.

Comparative Analysis of the Specifications on the Power Quality of the European Union and the Russian Federation

NASA Astrophysics Data System (ADS)

Ded, A. V.; Maltsev, V. N.; Sikorski, S. P.

2018-04-01

Since July 2014 the interstate standard GOST 32144-2013 is the only document that defines standard requirements for the power quality in the territory of the Russian Federation. The new standard preamble specifies that this document considers the requirements of the European regional standard EN 50160-2010. However, GOST authors established the degree of standards conformity as nonequivalent. In connection with Russia's accession to the World Trade Organization (WTO) all requirements for goods including electric energy should correspond the international standard requirements. The article analyzes the above standard requirements and assesses the requirements for the power quality standards used in the European Union and in the Russian Federation.

Re-Integrating Academic Development and Academic Language and Learning: A Call to Reason

ERIC Educational Resources Information Center

Percy, Alisa

2014-01-01

This paper argues for the re-integration of academic development (AD) and a academic language and learning (ALL) practitioners in Australian higher education. This argument is made as universities aim to develop internationally recognised, inter-disciplinary and standards-based curricula against the backdrop of international comparative education…

Imputation of microsatellite alleles from dense SNP genotypes for parentage verification across multiple Bos taurus and Bos indicus breeds

USDA-ARS?s Scientific Manuscript database

Microsatellite markers (MS) have traditionally been used for parental verification and are still the international standard in spite of their higher cost, error rate, and turnaround time compared with Single Nucleotide Polymorphisms (SNP) -based assays. Despite domestic and international demands fr...

Developing Collaboratively an International School Special Needs Plan for Multicultural, Multilingual, and Multinational Secondary Students.

ERIC Educational Resources Information Center

Jonietz, Patricia L.

The International School of Brussels (Belgium) developed a program of Curriculum-Based Assessment (CBA) to increase support for "at risk" multicultural, multilingual, and multinational students. The at-risk population included three groups: those who passed standardized English as a Foreign Language tests but were not literate enough for…

25 CFR 542.32 - What are the minimum internal control standards for internal audit for Tier B gaming operations?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 2 2013-04-01 2013-04-01 false What are the minimum internal control standards for internal audit for Tier B gaming operations? 542.32 Section 542.32 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.32 What are the minimum internal control standards for...

25 CFR 542.22 - What are the minimum internal control standards for internal audit for Tier A gaming operations?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 2 2012-04-01 2012-04-01 false What are the minimum internal control standards for internal audit for Tier A gaming operations? 542.22 Section 542.22 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.22 What are the minimum internal control standards for...

25 CFR 542.22 - What are the minimum internal control standards for internal audit for Tier A gaming operations?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 2 2013-04-01 2013-04-01 false What are the minimum internal control standards for internal audit for Tier A gaming operations? 542.22 Section 542.22 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.22 What are the minimum internal control standards for...

25 CFR 542.22 - What are the minimum internal control standards for internal audit for Tier A gaming operations?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 2 2014-04-01 2014-04-01 false What are the minimum internal control standards for internal audit for Tier A gaming operations? 542.22 Section 542.22 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.22 What are the minimum internal control standards for...

25 CFR 542.22 - What are the minimum internal control standards for internal audit for Tier A gaming operations?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 2 2011-04-01 2011-04-01 false What are the minimum internal control standards for internal audit for Tier A gaming operations? 542.22 Section 542.22 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.22 What are the minimum internal control standards for...

25 CFR 542.32 - What are the minimum internal control standards for internal audit for Tier B gaming operations?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 2 2011-04-01 2011-04-01 false What are the minimum internal control standards for internal audit for Tier B gaming operations? 542.32 Section 542.32 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.32 What are the minimum internal control standards for...

25 CFR 542.32 - What are the minimum internal control standards for internal audit for Tier B gaming operations?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 2 2012-04-01 2012-04-01 false What are the minimum internal control standards for internal audit for Tier B gaming operations? 542.32 Section 542.32 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.32 What are the minimum internal control standards for...

25 CFR 542.32 - What are the minimum internal control standards for internal audit for Tier B gaming operations?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 2 2014-04-01 2014-04-01 false What are the minimum internal control standards for internal audit for Tier B gaming operations? 542.32 Section 542.32 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.32 What are the minimum internal control standards for...